WorldWideScience

Sample records for resistance damage depth

  1. Expansive Soil Crack Depth under Cumulative Damage

    Directory of Open Access Journals (Sweden)

    Bei-xiao Shi

    2014-01-01

    Full Text Available The crack developing depth is a key problem to slope stability of the expansive soil and its project governance and the crack appears under the roles of dry-wet cycle and gradually develops. It is believed from the analysis that, because of its own cohesion, the expansive soil will have a certain amount of deformation under pulling stress but without cracks. The soil body will crack only when the deformation exceeds the ultimate tensile strain that causes cracks. And it is also believed that, due to the combined effect of various environmental factors, particularly changes of the internal water content, the inherent basic physical properties of expansive soil are weakened, and irreversible cumulative damages are eventually formed, resulting in the development of expansive soil cracks in depth. Starting from the perspective of volumetric strain that is caused by water loss, considering the influences of water loss rate and dry-wet cycle on crack developing depth, the crack developing depth calculation model which considers the water loss rate and the cumulative damages is established. Both the proposal of water loss rate and the application of cumulative damage theory to the expansive soil crack development problems try to avoid difficulties in matrix suction measurement, which will surely play a good role in promoting and improving the research of unsaturated expansive soil.

  2. Exploring the potential of multivariate depth-damage and rainfall-damage models

    DEFF Research Database (Denmark)

    van Ootegem, Luc; van Herck, K.; Creten, T.

    2018-01-01

    In Europe, floods are among the natural catastrophes that cause the largest economic damage. This article explores the potential of two distinct types of multivariate flood damage models: ‘depth-damage’ models and ‘rainfall-damage’ models. We use survey data of 346 Flemish households that were vi...

  3. Strong intermediate-depth Vreancea earthquakes: Damage capacity in Bulgaria

    International Nuclear Information System (INIS)

    Kouteva-Guentcheva, M.P.; Paskaleva, I.P.; Panza, G.F.

    2008-08-01

    The sustainable development of the society depends not only on a reasonable policy for economical growth but also on the reasonable management of natural risks. The regional earthquake danger due to the Vrancea intermediate-depth earthquakes dominates the hazard of NE Bulgaria. These quakes have particularly long-period and far-reaching effects, causing damages at large epicentral distances. Vrancea events energy attenuates considerably less rapidly than that of the wave field radiated by the seismically active zones in Bulgaria. The available strong motion records at Russe, NE Bulgaria, due to both Vrancea events - August 30, 1986 and May 30, 1990 show higher seismic response spectra amplitudes for periods up to 0.6 s for the horizontal components, compared to the values given in the Bulgarian Code and Eurocode 8. A neo-deterministic analytical procedure which models the wavefield generated by a realistic earthquake source, as it propagates through a laterally varying anelastic medium, is applied to obtain the seismic loading at Russe. After proper validation, using the few available data and parametric analyses, from the synthesized seismic signals damage capacity of selected scenario Vrancea quakes is estimated and compared with available capacity curves for some reinforced concrete and masonry structures, representative of the Balkan Region. The performed modelling has shown that the earthquake focal mechanisms control the seismic loading much more than the local geology, and that the site response should be analyzed by considering the whole thickness of sediments until the bedrock, and not only the topmost 30 m. (author)

  4. Repair methods for damaged pipeline beyond diving depth

    OpenAIRE

    Mohammadi, Keramat

    2011-01-01

    Master's thesis in Offshore Technology Mechanical damage of a subsea pipeline is found as one of the most severe concern in management of pipeline integrity. The need to reach and bring the hydrocarbons from the fields located in deep and ultra-deep waters, imposes the need to improve the technologies and techniques in order to repair any unacceptable damage in pipeline. The main objective of this work is to investigate various methods for repairing a subsea pipeline that has been damaged ...

  5. Evaluation of Unknown Tube Well Depth Using Electrical Resistivity Method

    Directory of Open Access Journals (Sweden)

    Zainal Abidin Mohd Hazreek

    2017-01-01

    Full Text Available Electrical resistivity method has increasingly adopted in engineering, environmental, mining and archaeological studies. Systematic and proper studies of unknown civil engineering structure evaluation particularly on tube well depth was rarely being established. Conventionally, camera test or string with weight approach has been used to evaluate unknown tube well depth thus exposed to several restriction due to its expensive and time consuming. Hence, this study focused on evaluation of unknown tube well depth using indirect test with particular reference to electrical resistivity method (ERM.A single spread line of electrical resistivity survey was performed using ABEM SAS 4000 equipment set based on Wenner and Pole-dipole array in line with the tube well position. Electrical resistivity raw data was processed using RES2DINV software producing electrical resistivity tomography (ERT of the subsurface profile studied. Then, electrical resistivity value (ERV obtained from RES2DINV analyses (ERT was extracted and analysed using plotted graph (depth versus ERV specifically at tube well position based on electrical resistivity spread line performed. It was found that both array have shown some good similarity results in term of tube well depth (20 m thus able to verify the result interpreted. Both array have shown some good similarity of ERV representing groundwater (ERV = 10 – 100 Ωm and soil with water (ERV > 100 Ωm at depth of 0 – 20 m and >20 m respectively. All those interpretation have shown good agreement based on verification thru established ERV of earth materials references, geological map and nearest available boreholes data. Hence, this study has shown that the application of ERM was applicable in evaluation of unknown tube well depth which efficient in term of cost, time and environmental sustainable.

  6. Study of damaged depth profiles of ion-irradiated PEEK

    Czech Academy of Sciences Publication Activity Database

    Vacík, Jiří; Hnatowicz, Vladimír; Červená, Jarmila; Apel, P. Yu.; Posta, S.; Kobayashi, Y.

    2007-01-01

    Roč. 201, 19-20 (2007), s. 8370-8372 ISSN 0257-8972 R&D Projects: GA MPO(CZ) 1H-PK2/05; GA MŠk 1P04LA213 Institutional research plan: CEZ:AV0Z10480505 Keywords : Oxygen irradiation * Poly-aryl-ether-ether ketone * Thermal neutron depth profiling (TNDP) Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 1.678, year: 2007

  7. Studies on depth profiling of proton damage by channeling and its applications

    International Nuclear Information System (INIS)

    Nashiyama, Isamu

    1982-01-01

    A new method to analyze backscattering spectra with improved accuracy and a new experimental method to determine the depth profile of irradiation damage distribution, which uses the channeling backscattering on both front and back surfaces, are reported. In this analysis, the conventional concept of one-to-one correspondence between energy and depth cannot be applied. Both energy to depth scale conversions and damage calculations are performed at the same time by using an integral equation, where the energy spreading of random particles dechanneled at various depths is taken into account. Next, a new experimental technique, ''front- and back-surface channeling backscattering'', has been developed. Shortcomings of existing dechanneling theories have been experimentally overcome by employing the new technique, and depth profiles of proton irradiation damage in silicon have been measured at room temperature. Then, a ''simple damage profile'' model is presented in order to approximate the experimental profile obtained. The model is based on empirical range-energy relationship, Lindhard power law potential and Kinchin-Pease damage theory. It reproduces the characteristic sharp perk in the experimental damage profile better than LSS (Lindhard Scharff Schiphitt) theory. Using these methods, the depth profile of the proton irradiation damage in silicon single crystals was determined. The mechanism of the complicated degradation in the performance of silicon solar cells after proton irradiation was clarified, utilizing the knowledge thus obtained. (J.P.N.)

  8. A passive quantitative measurement of airway resistance using depth data.

    Science.gov (United States)

    Ostadabbas, Sarah; Bulach, Christoph; Ku, David N; Anderson, Larry J; Ghovanloo, Maysam

    2014-01-01

    The Respiratory Syncytial Virus (RSV) is the most common cause of serious lower respiratory tract infections in infants and young children. RSV often causes increased airway resistance, clinically detected as wheezing by chest auscultation. In this disease, expiratory flows are significantly reduced due to the high resistance in patient's airway passages. A quantitative method for measuring resistance can have a great benefit to diagnosis and management of children with RSV infections as well as with other lung diseases. Airway resistance is defined as the lung pressure divided by the airflow. In this paper, we propose a method to quantify resistance through a simple, non-contact measurement of chest volume that can act as a surrogate measure of the lung pressure and volumetric airflow. We used depth data collected by a Microsoft Kinect camera for the measurement of the lung volume over time. In our experimentation, breathing through a number of plastic straws induced different airway resistances. For a standard spirometry test, our volume/flow estimation using Kinect showed strong correlation with the flow data collected by a commercially-available spirometer (five subjects, each performing 20 breathing trials, correlation coefficient = 0.88, with 95% confidence interval). As the number of straws decreased, emulating a higher airway obstruction, our algorithm was sufficient to distinguish between several levels of airway resistance.

  9. Growth of laser damage in fused silica: diameter to depth ratio

    Energy Technology Data Exchange (ETDEWEB)

    Norton, M A; Adams, J J; Carr, C W; Donohue, E E; Feit, M D; Hackel, R P; Hollingsworth, W G; Jarboe, J A; Matthews, M; Rubenchik, A M; Spaeth, M L

    2007-10-29

    Growth of laser initiated damage plays a major role in determining optics lifetime in high power laser systems. Previous measurements have established that the lateral diameter grows exponentially. Knowledge of the growth of the site in the propagation direction is also important, especially so when considering techniques designed to mitigate damage growth, where it is required to reach all the subsurface damage. In this work, we present data on both the diameter and the depth of a growing exit surface damage sites in fused silica. Measured growth rates with both 351 nm illumination and with combined 351 nm and 1054 nm illumination are discussed.

  10. Assessment of geomechanical properties, maximum depth and excavation damaged zone aspects - Expert report

    International Nuclear Information System (INIS)

    Amann, F.; Löw, S.; Perras, M.

    2015-11-01

    This comprehensive report published by the Swiss National Nuclear Safety Inspectorate ENSI discusses the expert report published on the need for the assessment of geomechanical properties and maximum depth of repositories for high, medium and low-activity nuclear wastes. Also, aspects concerning excavation damaged zones (EDZ) are considered. These are all criteria for the selection of sites as part of Phase 2 of the Swiss waste disposal project. Four questions are examined: are NAGRA’s documented basic considerations and calculations on Opalinus Clay comprehensive enough and correct, are the calculations on maximum depth correct, are the proposed storage perimeters correct with respect to depth and will NAGRA be able to take possible excavation damaged zones (EDZ) into account? Literature and references concerning the subject are quoted

  11. Microstructure refinement of tungsten by surface deformation for irradiation damage resistance

    International Nuclear Information System (INIS)

    Efe, Mert; El-Atwani, Osman; Guo, Yang; Klenosky, Daniel R.

    2014-01-01

    Surface deformation by machining is demonstrated as a way to engineer microstructures of pure tungsten for extreme irradiation environments. Thermomechanical conditions are established for microstructure refinement in the chips and the workpiece subsurface. Ultrafine grains are observed both in the chip and the subsurface, at depths relevant to the typical thickness of the irradiation-induced damage. Guidelines for producing a uniform, ultrafine-grained structure via machining and other surface deformation processes are discussed along with the implications of such microstructures for damage resistance

  12. Femtosecond damage resistance of femtosecond multilayer and hybrid mirrors.

    Science.gov (United States)

    Csajbók, Viktória; Szikszai, Lőrinc; Nagy, Benedek J; Dombi, Péter

    2016-08-01

    Improving the laser-induced damage threshold of optical components is a basic endeavor in femtosecond technology. By testing more than 30 different femtosecond mirrors with 42 fs laser pulses at 1 kHz repetition rate, we found that a combination of high-bandgap dielectric materials and improved design and coating techniques enable femtosecond multilayer damage thresholds exceeding 2  J/cm2 in some cases. A significant ×2.5 improvement in damage resistance can also be achieved for hybrid Ag-multilayer mirrors exhibiting more than 1  J/cm2 threshold with a clear anticorrelation between damage resistance and peak field strength in the stack. Slight dependence on femtosecond pulse length and substantial decrease for high (megahertz) repetition rates are also observed.

  13. Laboratory evaluation of resistance to moisture damage in asphalt mixtures

    Directory of Open Access Journals (Sweden)

    Ahmed Ebrahim Abu El-Maaty Behiry

    2013-09-01

    Full Text Available Moisture damage in asphalt mixtures refers to loss in strength and durability due to the presence of water. Egypt road network is showing severe deterioration such as raveling and stripping because the bond between aggregates and asphalt film is broken due to water intrusion. To minimize moisture damage, asphalt mixes are investigated to evaluate the effect of air voids, degree of saturation, media of attack and the conditioning period. Two medias of attack are considered and two anti-stripping additives are used (hydrated lime and Portland cement. The retained Marshall stability and tensile strength ratio are calculated to determine the resistance to moisture damage. The results showed that both lime and cement could increase Marshall stability, resilient modulus, tensile strength and resistance to moisture damage of mixtures especially at higher condition periods. Use of hydrated lime had better results than Portland cement.

  14. Measurements of Epidural Space Depth Using Preexisting CT Scans Correlate with Loss of Resistance Depth during Thoracic Epidural Catheter Placement

    Directory of Open Access Journals (Sweden)

    Nathaniel H. Greene

    2015-01-01

    Full Text Available Background. Thoracic epidural catheters provide the best quality postoperative pain relief for major abdominal and thoracic surgical procedures, but placement is one of the most challenging procedures in the repertoire of an anesthesiologist. Most patients presenting for a procedure that would benefit from a thoracic epidural catheter have already had high resolution imaging that may be useful to assist placement of a catheter. Methods. This retrospective study used data from 168 patients to examine the association and predictive power of epidural-skin distance (ESD on computed tomography (CT to determine loss of resistance depth acquired during epidural placement. Additionally, the ability of anesthesiologists to measure this distance was compared to a radiologist, who specializes in spine imaging. Results. There was a strong association between CT measurement and loss of resistance depth (P35 changed this relationship (P=0.007. The ability of anesthesiologists to make CT measurements was similar to a gold standard radiologist (all individual ICCs>0.9. Conclusions. Overall, this study supports the examination of a recent CT scan to aid in the placement of a thoracic epidural catheter. Making use of these scans may lead to faster epidural placements, fewer accidental dural punctures, and better epidural blockade.

  15. The determination of gold depth distribution in semiconductor silicon-potential interferences inherent in NAA by radiation damages

    International Nuclear Information System (INIS)

    Rudolph, P.; Lange, A.; Flachowsky, J.

    1986-01-01

    Gold is used quite extensively to control the charge storage time of high speed diodes and transistors. Therefore, the diffusion of gold into silicon wafers of finite thickness is important in the design and fabrication of these devices. Therefore it is necessary to estimate exactly concentration and depth distribution of gold formed by gold doping. Usually, gold content and depth distribution has been estimate by neutron activation analysis with step by step etching techniques. But during the irradiation in a nuclear fuel reactor the silicon wafers undergo minute or pronounced radiation damages which may affect the depth profiles of gold concentration. (author)

  16. Aligned composite structures for mitigation of impact damage and resistance to wear in dynamic environments

    Science.gov (United States)

    Mulligan, Anthony C.; Rigali, Mark J.; Sutaria, Manish P.; Popovich, Dragan; Halloran, Joseph P.; Fulcher, Michael L.; Cook, Randy C.

    2009-04-14

    Fibrous monolith composites having architectures that provide increased flaw insensitivity, improved hardness, wear resistance and damage tolerance and methods of manufacture thereof are provided for use in dynamic environments to mitigate impact damage and increase wear resistance.

  17. Development of synthetic velocity - depth damage curves using a Weighted Monte Carlo method and Logistic Regression analysis

    Science.gov (United States)

    Vozinaki, Anthi Eirini K.; Karatzas, George P.; Sibetheros, Ioannis A.; Varouchakis, Emmanouil A.

    2014-05-01

    Damage curves are the most significant component of the flood loss estimation models. Their development is quite complex. Two types of damage curves exist, historical and synthetic curves. Historical curves are developed from historical loss data from actual flood events. However, due to the scarcity of historical data, synthetic damage curves can be alternatively developed. Synthetic curves rely on the analysis of expected damage under certain hypothetical flooding conditions. A synthetic approach was developed and presented in this work for the development of damage curves, which are subsequently used as the basic input to a flood loss estimation model. A questionnaire-based survey took place among practicing and research agronomists, in order to generate rural loss data based on the responders' loss estimates, for several flood condition scenarios. In addition, a similar questionnaire-based survey took place among building experts, i.e. civil engineers and architects, in order to generate loss data for the urban sector. By answering the questionnaire, the experts were in essence expressing their opinion on how damage to various crop types or building types is related to a range of values of flood inundation parameters, such as floodwater depth and velocity. However, the loss data compiled from the completed questionnaires were not sufficient for the construction of workable damage curves; to overcome this problem, a Weighted Monte Carlo method was implemented, in order to generate extra synthetic datasets with statistical properties identical to those of the questionnaire-based data. The data generated by the Weighted Monte Carlo method were processed via Logistic Regression techniques in order to develop accurate logistic damage curves for the rural and the urban sectors. A Python-based code was developed, which combines the Weighted Monte Carlo method and the Logistic Regression analysis into a single code (WMCLR Python code). Each WMCLR code execution

  18. Quantitative damage depth profiles in arsenic implanted HgCdTe

    Energy Technology Data Exchange (ETDEWEB)

    Lobre, C., E-mail: clement.lobre@cea.fr [CEA-Leti, MINATEC, 17 rue des Martyrs, 38054 Grenoble cedex 9 (France); Jalabert, D. [CEA-INAC/UJF-Grenoble 1 UMR-E, MINATEC, 17 rue des Martyrs, 38054 Grenoble cedex 9 (France); Vickridge, I.; Briand, E.; Benzeggouta, D. [Institut des NanoSciences de Paris, UMR 7588 du CNRS, Universite de Pierre et Marie Curie, Paris (France); Mollard, L. [CEA-Leti, MINATEC, 17 rue des Martyrs, 38054 Grenoble cedex 9 (France); Jouneau, P.H. [CEA-INAC/UJF-Grenoble 1 UMR-E, MINATEC, 17 rue des Martyrs, 38054 Grenoble cedex 9 (France); Ballet, P. [CEA-Leti, MINATEC, 17 rue des Martyrs, 38054 Grenoble cedex 9 (France)

    2013-10-15

    Rutherford backscattering experiments under channeling conditions (RBS-c) have been carried out on Hg{sub 0.77}Cd{sub 0.23}Te (MCT) layers implanted with arsenic. Accurate damage profiles have been extracted through a simple formalism for implanted and annealed layers. Quantitative damage profiles are correlated with structural defects observed by bright-field scanning transmission electron microscopy (BF-STEM) and chemical composition measured by secondary ion mass spectrometry (SIMS). Evolution of damage for increasing ion implantation fluence has been investigated by these three complementary techniques. Evidence is found of irradiation induced annealing during implantation. A fast damage recovery has been observed for post-implantation thermal anneals. In the case of an implanted layer annealed during 1 h, the damage profile, associated with arsenic concentration measurements, indicates the presence of complexes involving arsenic.

  19. Quantitative damage depth profiles in arsenic implanted HgCdTe

    International Nuclear Information System (INIS)

    Lobre, C.; Jalabert, D.; Vickridge, I.; Briand, E.; Benzeggouta, D.; Mollard, L.; Jouneau, P.H.; Ballet, P.

    2013-01-01

    Rutherford backscattering experiments under channeling conditions (RBS-c) have been carried out on Hg 0.77 Cd 0.23 Te (MCT) layers implanted with arsenic. Accurate damage profiles have been extracted through a simple formalism for implanted and annealed layers. Quantitative damage profiles are correlated with structural defects observed by bright-field scanning transmission electron microscopy (BF-STEM) and chemical composition measured by secondary ion mass spectrometry (SIMS). Evolution of damage for increasing ion implantation fluence has been investigated by these three complementary techniques. Evidence is found of irradiation induced annealing during implantation. A fast damage recovery has been observed for post-implantation thermal anneals. In the case of an implanted layer annealed during 1 h, the damage profile, associated with arsenic concentration measurements, indicates the presence of complexes involving arsenic

  20. Self-healing of damage in heat resisting steels

    Science.gov (United States)

    Shinya, Norio; Kyono, Junro

    2002-11-01

    Material damage is too fine to be detected by non-destructive tests and difficult to be repaired during use. Therefore self-healing of damage is most desirable to improve the reliability of materials and structures. In heat resisting steels, creep cavities nucleate at grain boundaries by long time use at high temperatures. These creep cavities grow along grain boundaries, from grain boundary cracks by linking up each other and cause the premature and low ductility fracture. Therefore long time creep rupture life and ductility chiefly depend upon the behavior of nucleation and growth of creep cavities. If the growth of creep cavities could be suppressed, the creep rupture properties of creep rupture life and ductility should be improved due to prevention of the premature fracture. Ordinary austenitic stainless steels contain sulfur as impurity and the sulfure segregates preferentially to creep cavity surface because of its high surface actiivty. It is possible to remove sulfur almost completely by doping cerium and adding titanium to the austenitic stainless steels. By adding boron and nitrogen, boron nitride precipitates on creep cavity surface. It was thought that the boron nitride on creep cavity surface suppresses creep cavity grwoth and improve creep rupture life and ductility by its healing effect on cavities.

  1. Novel optical waveguides by in-depth controlled electronic damage with swift ions

    International Nuclear Information System (INIS)

    Olivares, J.; Garcia-Navarro, A.; Mendez, A.; Agullo-Lopez, F.; Garcia, G.; Garcia-Cabanes, A.; Carrascosa, M.

    2007-01-01

    We review recent results on a novel method to modify crystalline dielectric materials and fabricate optical waveguides and integrated optics devices. It relies on irradiation with medium-mass high-energy ions (2-50 MeV) where the electronic stopping power is dominant over that one associated to nuclear collisions. By exploiting the processing capabilities of the method, novel optical structures can be achieved at moderate (10 14 cm -2 ) and even low and ultralow (10 12 cm -2 ) fluences. In particular, step-like waveguides with a high index jump Δn ∼ 0.1-0.2, guiding both ordinary and extraordinary modes, have been prepared with F and O ions (20 MeV) at moderate fluences. They present good non-linear and electrooptic perfomance and low losses. (1 dB/cm). Moreover, useful optical waveguiding has been also achieved at ultralow frequencies (isolated track regime), using Cl and Si ions (40-45 MeV). In this latter case, the individual amorphous nanotracks, whose radius increases with depth, create an effective optical medium causing optical trapping

  2. Multiscale analysis of depth-dependent soil penetration resistance in a tropical soil

    Science.gov (United States)

    Paiva De Lima, Renato; Santos, Djail; Medeiros Bezerra, Joel; Machado Siqueira, Glécio; Paz González, Antonio

    2013-04-01

    Soil penetration resistance (PR) is widely used because it is linked to basic soil properties; it is correlated to root growth and plant production and is also used as a practical tool for assessing soil compaction and to evaluate the effects of soil management. This study investigates how results from multifractal analysis can quantify key elements of depth-dependent PR profiles and how this information can be used at the field scale. We analyzed multifractality of 50 PR vertical profiles, measured from 0 to 40 cm depth and randomly located on a 6.5 ha sugar cane field in north-eastern Brazil. According to the Soil Taxonomy, the studied soil was classified as an Orthic Podsol The scaling property of each profile was typified by singularity and Rényi spectra estimated by the method of moments. The Hurst exponent was used to parameterize the autocorrelation of the vertical PR data sets. Singularity and Rènyi spectra showed the vertical PR data sets exhibited a well-defined multifractal structure. Hurst exponent values were close to one indicating strong persistence in PR variation with soil depth. Also Hurst exponent was negatively and significantly correlated to coefficient of variation (CV) and skewness of the depth-dependent PR. Multifractal analysis added valuable information to describe the spatial arrangement of depth-dependent penetrometer data sets, which was not taken into account by classical statistical indices. Multifractal parameters were mapped over the experimental field and compared with mean, maximum and minimum values of PR; these maps showed the multifractal approach also may complete information provided by descriptive statistics at the field scale.

  3. The investigation of the depth profile of the beam damage in silicon after ion implantation by means of the MOS-structure

    International Nuclear Information System (INIS)

    Ferretti, R.

    1980-01-01

    The depth profile of the beam damage and the ion profile was measured in Silicon after ion implantation by MOS structures. For helium implantation deep acceptor-like centers are found. The damage range is determined for all samples and the theory is discussed. (BHO)

  4. The reduction in fatigue crack growth resistance of dentin with depth.

    Science.gov (United States)

    Ivancik, J; Neerchal, N K; Romberg, E; Arola, D

    2011-08-01

    The fatigue crack growth resistance of dentin was characterized as a function of depth from the dentino-enamel junction. Compact tension (CT) specimens were prepared from the crowns of third molars in the deep, middle, and peripheral dentin. The microstructure was quantified in terms of the average tubule dimensions and density. Fatigue cracks were grown in-plane with the tubules and characterized in terms of the initiation and growth responses. Deep dentin exhibited the lowest resistance to the initiation of fatigue crack growth, as indicated by the stress intensity threshold (ΔK(th) ≈ 0.8 MPa•m(0.5)) and the highest incremental fatigue crack growth rate (over 1000 times that in peripheral dentin). Cracks in deep dentin underwent incremental extension under cyclic stresses that were 40% lower than those required in peripheral dentin. The average fatigue crack growth rates increased significantly with tubule density, indicating the importance of microstructure on the potential for tooth fracture. Molars with deep restorations are more likely to suffer from the cracked-tooth syndrome, because of the lower fatigue crack growth resistance of deep dentin.

  5. Damage saturation effects on volume and resistivity changes induced by fission-fragment irradiation of copper

    International Nuclear Information System (INIS)

    Birtcher, R.C.; Blewitt, T.H.

    1981-01-01

    Damage production and saturation has been monitored in copper by simultaneous electrical resistivity- and length-change measurements. Damage was introduced by 235 U fission fragments at either 7 or 85 K. At both temperatures, the resistivity and length changes were linearly related to each other for resistivity changes less than 80% saturation resistivity. The linear relationship was the same for both irradiation temperatures and was the same as that observed previously for 10 B fission fragment irrations at 4 K. These results are interpreted to show that the resistivity change per defect is unaffected by irradiation under conditions which lead to interstitial clustering. (orig.)

  6. Fatigue damage measurement based on electrical resistance change in carbon steel C45

    International Nuclear Information System (INIS)

    Atanazio Filho, Nelson N.; Mansur, Tanius Rodrigues; Gomes, Paulo T. Vida; Nogueira, Andre L.

    2009-01-01

    Structural components normally experience fatigue cycling during operation. Failure of these components is mostly due to fatigue. So, it is important to know the fatigue damage behavior and fatigue life of the material before selecting these alloys for making different structural components. Damage is a very important concept in fatigue studies. In the context of the continuous damage mechanics of materials is defined as a property that decreases the component strength, until failure. The process of damage creation consists in the superficial discontinuity nucleation (micro cracks) and/or volumetric discontinuity nucleation (micro cracks or micro-cavities) in the material. It begins where the localized stress exceeds the material yielding stress under stress or strain fluctuation. Generally mechanical components suffer damages along their entire life, since the external loads exceed the allowable stress. In applications where the fatigue problems are determinative, the damage measurement has a fundamental importance. In this case, always that the external alternate stress for superior to the fatigue strength limit, will occur an irrecoverable and cumulative damage in the material. The damage quantitative evaluation is a complex task, since it involves macroscopic and microscopic characteristics of the material. Electrical resistance measurement method has been used in terms of monitoring and damage measurement. The electrical resistance method is particularly effective for detecting small and subtle defects in structural materials and in joints. The objective of this work is measure damages caused by reverse fatigue in carbon steel C45 using electrical resistance measurement method. (author)

  7. Towards mechanisms-guided resistivity-based monitoring of damage evolution in laminated composites

    KAUST Repository

    Lubineau, Gilles

    2013-04-05

    A convenient health monitoring technique for detecting degradation in laminated composite is to monitor the change of electrical resistance along multiple conduction paths within the structure. Yet, the relations between the global modification of resistivity and the exact underlying damage map is still unclear that makes diffcult to interpret these nondestructive-testing results. The challenge is then to be able to reconstruct from these global observation the underlying damage map. This is even more diffcult due to the numerous underlying damage mechanisms that can take place either at the inter laminar of intra laminar level. This paper intends to provide some preliminary insights about strategies to recover the damage state based only on global measurements. We focus here on transverse cracking detection. We introduce the homogenization process that defines at the meso scale an equivalent homogeneous ply that is energetically equivalent to the cracked one. This can be used as a first tool to reconstruct damage maps based on global resistivity measurements.

  8. Analysis for the depth of underground resistivity structure by using MT method

    International Nuclear Information System (INIS)

    Matsuo, Koichi; Yokoi, Koichi; Negi, Tateyuki; Kasagi, Toshio; Takahashi, Takeharu; Teshima, Minoru

    2005-03-01

    The present document is to report the result of resistivity monitoring by using MT (Magnetotelluric) method near the site proposed for the Horonobe Underground Research Program at the Horonobe-cho, Hokkaido by the Japan Nuclear Cycle Development Institute. The stationary MT observation system, installed near the HDB-1 borehole on November 2002, was moved to a site at the Hokusei-en, 4 km west of the first site. This system is monitoring for the depth of underground resistivity. Observation data at the Hokusei-en from February 1st 2004 to January 31st 2005 was added to the investigation in 2004 fiscal year. But, data cannot be obtained from July 8th to November 11th of 2004 due to the disconnection trouble of the optical fiber cable for data transfer. The results were as follows; 1) Telluric and magnetic time series data measured by MT unit were transferred to a PC installed in an observation through optical fiber cable and processed and edited automatically. 2) The standard deviation of the apparent resistivity depends on range of frequency, 3% or less in the vicinity of the Schumann resonance frequency. The Standard deviation of data from 80 Hz to 0.56 Hz was less or 13%. But the standard deviation of low frequency data was more or 15%. 3) Amplitude of telluric and magnetic spectra below 1 Hz is coincident with Geomagnetic Activity K-index. Clear correlation was not admitted in resistivity and K-index. 4) Data quality was studied compared with weather data. Clear correlation was not admitted for windy day and rainy day. 5) Data was edited by the new criterion of K-index 1.3 or more, wind 6 m/s or less, precipitation 6 mm or less. As a result, the improvement of the data quality was admitted by 5 frequencies of 9 frequencies. Only one side of resistivity Rxy and Ryx was improved by 4 frequencies of the remainder. 6) In addition, data was edited by the new criterion of the coherence of the electric-magnetic amplitude. As a result, the improvement of the data quality

  9. Grain, silage and forage sorghum hybrid resistance to insect and bird damage, 2017

    Science.gov (United States)

    A total of 32 grain and 30 forage type sorghum hybrids were evaluated for resistance to insect, disease, and bird damage in Tifton, Georgia. These hybrids plus 33 silage type and 5 pearl millet hybrids also were evaluated for sugarcane aphid resistance near Griffin, Georgia. A total of 10 insect pes...

  10. From 1 Sun to 10 Suns c-Si Cells by Optimizing Metal Grid, Metal Resistance, and Junction Depth

    International Nuclear Information System (INIS)

    Chaudhari, V.A.; Solanki, C.S.

    2009-01-01

    Use of a solar cell in concentrator PV technology requires reduction in its series resistance in order to minimize the resistive power losses. The present paper discusses a methodology of reducing the series resistance of a commercial c-Si solar cell for concentrator applications, in the range of 2 to 10 suns. Step by step optimization of commercial cell in terms of grid geometry, junction depth, and electroplating of the front metal contacts is proposed. A model of resistance network of solar cell is developed and used for the optimization. Efficiency of un optimized commercial cell at 10 suns drops by 30% of its 1 sun value corresponding to resistive power loss of about 42%. The optimized cell with grid optimization, junction optimization, electroplating, and junction optimized with electroplated contacts cell gives resistive power loss of 20%, 16%, 11%, and 8%, respectively. An efficiency gain of 3% at 10 suns for fully optimized cell is estimated

  11. Candidate genes for cross-resistance against DNA-damaging drugs

    DEFF Research Database (Denmark)

    Wittig, Rainer; Nessling, Michelle; Will, Rainer D

    2002-01-01

    Drug resistance of tumor cells leads to major drawbacks in the treatment of cancer. To identify candidate genes for drug resistance, we compared the expression patterns of the drug-sensitive human malignant melanoma cell line MeWo and three derived sublines with acquired resistance to the DNA...... as several apoptosis-related genes, in particular STK17A and CRYAB. As MPP1 and CRYAB are also among the 14 genes differentially expressed in all three of the drug-resistant sublines, they represent the strongest candidates for resistance against DNA-damaging drugs....

  12. A modified DOI-based method to statistically estimate the depth of investigation of dc resistivity surveys

    Science.gov (United States)

    Deceuster, John; Etienne, Adélaïde; Robert, Tanguy; Nguyen, Frédéric; Kaufmann, Olivier

    2014-04-01

    Several techniques are available to estimate the depth of investigation or to identify possible artifacts in dc resistivity surveys. Commonly, the depth of investigation (DOI) is mainly estimated by using an arbitrarily chosen cut-off value on a selected indicator (resolution, sensitivity or DOI index). Ranges of cut-off values are recommended in the literature for the different indicators. However, small changes in threshold values may induce strong variations in the estimated depths of investigation. To overcome this problem, we developed a new statistical method to estimate the DOI of dc resistivity surveys based on a modified DOI index approach. This method is composed of 5 successive steps. First, two inversions are performed by using different resistivity reference models for the inversion (0.1 and 10 times the arithmetic mean of the logarithm of the observed apparent resistivity values). Inversion models are extended to the edges of the survey line and to a depth range of three times the pseudodepth of investigation of the largest array spacing used. In step 2, we compute the histogram of a newly defined scaled DOI index. Step 3 consists of the fitting of the mixture of two Gaussian distributions (G1 and G2) to the cumulative distribution function of the scaled DOI index values. Based on this fitting, step 4 focuses on the computation of an interpretation index (II) defined for every cell j of the model as the relative probability density that the cell j belongs to G1, which describes the Gaussian distribution of the cells with a scaled DOI index close to 0.0. In step 5, a new inversion is performed by using a third resistivity reference model (the arithmetic mean of the logarithm of the observed apparent resistivity values). The final electrical resistivity image is produced by using II as alpha blending values allowing the visual discrimination between well-constrained areas and poorly-constrained cells.

  13. Electrical Resistance Based Damage Modeling of Multifunctional Carbon Fiber Reinforced Polymer Matrix Composites

    Science.gov (United States)

    Hart, Robert James

    In the current thesis, the 4-probe electrical resistance of carbon fiber-reinforced polymer (CFRP) composites is utilized as a metric for sensing low-velocity impact damage. A robust method has been developed for recovering the directionally dependent electrical resistivities using an experimental line-type 4-probe resistance method. Next, the concept of effective conducting thickness was uniquely applied in the development of a brand new point-type 4-probe method for applications with electrically anisotropic materials. An extensive experimental study was completed to characterize the 4-probe electrical resistance of CFRP specimens using both the traditional line-type and new point-type methods. Leveraging the concept of effective conducting thickness, a novel method was developed for building 4-probe electrical finite element (FE) models in COMSOL. The electrical models were validated against experimental resistance measurements and the FE models demonstrated predictive capabilities when applied to CFRP specimens with varying thickness and layup. These new models demonstrated a significant improvement in accuracy compared to previous literature and could provide a framework for future advancements in FE modeling of electrically anisotropic materials. FE models were then developed in ABAQUS for evaluating the influence of prescribed localized damage on the 4-probe resistance. Experimental data was compiled on the impact response of various CFRP laminates, and was used in the development of quasi- static FE models for predicting presence of impact-induced delamination. The simulation-based delamination predictions were then integrated into the electrical FE models for the purpose of studying the influence of realistic damage patterns on electrical resistance. When the size of the delamination damage was moderate compared to the electrode spacing, the electrical resistance increased by less than 1% due to the delamination damage. However, for a specimen with large

  14. Rugged Packaging for Damage Resistant Inertial Fusion Energy Optics

    Energy Technology Data Exchange (ETDEWEB)

    Stelmack, Larry

    2003-11-17

    The development of practical fusion energy plants based on inertial confinement with ultraviolet laser beams requires durable, stable final optics that will withstand the harsh fusion environment. Aluminum-coated reflective surfaces are fragile, and require hard overcoatings resistant to contamination, with low optical losses at 248.4 nanometers for use with high-power KrF excimer lasers. This program addresses the definition of requirements for IFE optics protective coatings, the conceptual design of the required deposition equipment according to accepted contamination control principles, and the deposition and evaluation of diamondlike carbon (DLC) test coatings. DLC coatings deposited by Plasma Immersion Ion Processing were adherent and abrasion-resistant, but their UV optical losses must be further reduced to allow their use as protective coatings for IFE final optics. Deposition equipment for coating high-performance IFE final optics must be designed, constructed, and operated with contamination control as a high priority.

  15. Impact damage resistance and damage suppression properties of shape memory alloys in hybrid composites—a review

    International Nuclear Information System (INIS)

    Angioni, S L; Meo, M; Foreman, A

    2011-01-01

    Composite materials are known to have a poor resistance to through-the-thickness impact loading. There are various methods for improving their impact damage tolerance, such as fiber toughening, matrix toughening, interface toughening, through-the-thickness reinforcements, and selective interlayers and hybrids. Hybrid composites with improved impact resistance are particularly useful in military and commercial civil applications. Hybridizing composites using shape memory alloys (SMA) is one solution since SMA materials can absorb the energy of the impact through superelastic deformation or recovery stress, reducing the effects of the impact on the composite structure. The SMA material may be embedded in the hybrid composites (SMAHC) in many different forms and also the characteristics of the fiber reinforcements may vary, such as SMA wires in woven laminates or SMA foils in unidirectional laminates, only to cite two examples. We will review the state of the art of SMAHC for the purpose of damage suppression. Both the active and passive damage suppression mechanisms will be considered. (topical review)

  16. Harnessing the p53-PUMA Axis to Overcome DNA Damage Resistance in Renal Cell Carcinoma

    Directory of Open Access Journals (Sweden)

    Xiaoguang Zhou

    2014-12-01

    Full Text Available Resistance to DNA damage–induced apoptosis is a hallmark of cancer and a major cause of treatment failure and lethal disease outcome. A tumor entity that is largely resistant to DNA-damaging therapies including chemo- or radiotherapy is renal cell carcinoma (RCC. This study was designed to explore the underlying molecular mechanisms of DNA damage resistance in RCC to develop strategies to resensitize tumor cells to DNA damage–induced apoptosis. Here, we show that apoptosis-resistant RCC cells have a disconnect between activation of p53 and upregulation of the downstream proapoptotic protein p53 upregulated modulator of apoptosis (PUMA. We demonstrate that this disconnect is not caused by gene-specific repression through CCCTC-binding factor (CTCF but instead by aberrant chromatin compaction. Treatment with an HDAC inhibitor was found to effectively reactivate PUMA expression on the mRNA and protein level and to revert resistance to DNA damage–induced cell death. Ectopic expression of PUMA was found to resensitize a panel of RCC cell lines to four different DNA-damaging agents tested. Remarkably, all RCC cell lines analyzed were wild-type for p53, and a knockdown was likewise able to sensitize RCC cells to acute genotoxic stress. Taken together, our results indicate that DNA damage resistance in RCC is reversible, involves the p53-PUMA axis, and is potentially targetable to improve the oncological outcomes of RCC patients.

  17. A Case Study of Damage Energy Analysis and an Early Warning by Microseismic Monitoring for Large Area Roof Caving in Shallow Depth Seams

    Directory of Open Access Journals (Sweden)

    Like Wei

    2015-01-01

    Full Text Available Shallow depth coal seams are widely spread in Shendong mining area, which is located in the Northwestern region of China. When working face is advanced out of concentrated coal pillar in upper room and pillar goaf, strong strata behaviors often cause support crushing accidents, and potentially induce large area residual pillars instability and even wind blast disaster. In order to predict the precise time when the accident happens, guaranteeing life-safety of miner, microseismic monitoring system was for the first time applied in shallow coal seam. Based on damage mechanics correlation theory, the damage energy model is established to describe relationship between damage level and cumulative energy of microseismic events. According to microseismic monitoring data of two support crushing accidents, the damage energy model is verified and an effective early warning method of these accidents is proposed. The field application showed that the early warning method had avoided miners suffering from all support crushing accidents in Shigetai coal mine.

  18. Enhancement of the damage resistance of ultra-fast optics by novel design approaches.

    Science.gov (United States)

    Willemsen, Thomas; Jupé, Marco; Gyamfi, Mark; Schlichting, Sebastian; Ristau, Detlev

    2017-12-11

    Dielectric components are essential for laser applications. Chirped mirrors are applied to compress the temporal pulse broadening crucial in the femtosecond regime. However, the design sensitivity and the electric field distribution of chirped mirrors is complex often resulting in low laser induced damage resistances. An approach is presented to increase the damage resistance of pulse compressing mirrors up to 190% in the NIR spectral range. Layers with critical high field intensity of a binary mirror design are substituted by ternary composites and quantized nanolaminates, respectively. The deposition process is improved by an in situ technique monitoring the phase of reflectance.

  19. A case study of liquefaction risk analysis based on the thickness and depth of the liquefaction layer using CPT and electric resistivity data in the Hinode area, Itako City, Ibaraki Prefecture, Japan

    Science.gov (United States)

    Jinguuji, Motoharu; Toprak, Selcuk

    2017-12-01

    The Hinode area of Itako City in Ibaraki Prefecture, Japan, suffered some of the most severe liquefaction damage of any areas in the Great Eastern Japan Earthquake in 2011. This liquefaction damage has been investigated by Itako City, as well as by universities and research institutes in Japan. The National Institute of Advanced Industrial Science and Technology (AIST) has carried out numerous investigations along the Tone River, and in particular, intensive surveys were done in the Hinode area. We have conducted a risk analysis based on the thickness and depth of the liquefaction layer measured using cone penetration testing (CPT) data and electric resistivity data obtained in the Hinode area. The distribution of the risk estimated from CPT at 143 points, and that obtained from analysis of the resistivity survey data, agreed with the distribution of actual damage. We also carried out conventional risk analyses method using the liquefaction resistance factor (FL) and liquefaction potential index (PL) methods with CPT data. The results show high PL values over the entire area, but their distribution did not agree well with actual damage in some parts of the study area. Because the analysis of the thickness and depth of the liquefaction layer, using geophysical prospecting methods, can cover a widespread area, this method will be very useful in investigating liquefaction risk, especially for gas and water pipelines.

  20. Resistivity damage rates in fusion-neutron-irradiated metals at 4.2 K

    International Nuclear Information System (INIS)

    Guinan, M.W.; Kinney, J.H.

    1981-01-01

    Changes in electrical resistivity at liquid helium temperature have been used to monitor the production of damage in dilute alloys of vanadium, niobium and molybdenum, and pure tungsten, aluminum and copper irradiated with high energy neutrons. The neutrons were produced at the Livermore rotating-target neutron sources (RTNS-I and RTNS-II). Further experiments on V, Nb and Mo were carried out with 30 MeV d-Be neutrons and slightly degraded fission-spectra neutrons. The results for all six materials are compared to those obtained in a pure fission spectrum. The relative damage production rates are in agreement with predictions based on damage energy calculations

  1. Novel Concepts for Damage-Resistant Alloys in Next Generation Nuclear Power Systems

    Energy Technology Data Exchange (ETDEWEB)

    Stephen M. Bruemmer; Peter L. Andersen; Gary Was

    2002-12-27

    The discovery of a damage-resistant alloy based on Hf solute additions to a low-carbon 316SS is the highlight of the Phase II research. This damage resistance is supported by characterization of radiation-induced microstructures and microchemistries along with measurements of environmental cracking. The addition of Hf to a low-carbon 316SS reduced the detrimental impact of radiation by changing the distribution of Hf. Pt additions reduced the impact of radiation on grain boundary segregation but did not alter its effect on microstructural damage development or cracking. Because cracking susceptibility is associated with several material characteristics, separate effect experiments exploring strength effects using non-irradiated stainless steels were conducted. These crack growth tests suggest that irradiation strength by itself can promote environmental cracking. The second concept for developing damage resistant alloys is the use of metastable precipitates to stabilize the microstructure during irradiation. Three alloys have been tailored for evaluation of precipitate stability influences on damage evolution. The first alloy is a Ni-base alloy (alloy 718) that has been characterized at low neutron irradiation doses but has not been characterized at high irradiation doses. The other two alloys are Fe-base alloys (PH 17-7 and PH 17-4) that have similar precipitate structures as alloy 718 but is more practical in nuclear structures because of the lower Ni content and hence lesser transmutation to He.

  2. Field Testing of Energy-Efficient Flood-Damage-Resistant Residential Envelope Systems Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Aglan, H.

    2005-08-04

    The primary purpose of the project was to identify materials and methods that will make the envelope of a house flood damage resistant. Flood damage resistant materials and systems are intended to be used to repair houses subsequent to flooding. This project was also intended to develop methods of restoring the envelopes of houses that have been flooded but are repairable and may be subject to future flooding. Then if the house floods again, damage will not be as extensive as in previous flood events and restoration costs and efforts will be minimized. The purpose of the first pair of field tests was to establish a baseline for typical current residential construction practice. The first test modules used materials and systems that were commonly found in residential envelopes throughout the U.S. The purpose of the second pair of field tests was to begin evaluating potential residential envelope materials and systems that were projected to be more flood-damage resistant and restorable than the conventional materials and systems tested in the first pair of tests. The purpose of testing the third slab-on-grade module was to attempt to dry flood proof the module (no floodwater within the structure). If the module could be sealed well enough to prevent water from entering, then this would be an effective method of making the interior materials and systems flood damage resistant. The third crawl space module was tested in the same manner as the previous modules and provided an opportunity to do flood tests of additional residential materials and systems. Another purpose of the project was to develop the methodology to collect representative, measured, reproducible (i.e. scientific) data on how various residential materials and systems respond to flooding conditions so that future recommendations for repairing flood damaged houses could be based on scientific data. An additional benefit of collecting this data is that it will be used in the development of a standard test

  3. The predicting ultimate of joint withdrawal resistance constructed of plywood with regression models application according to diameter and penetrating depth

    Directory of Open Access Journals (Sweden)

    Sadegh Maleki

    2013-11-01

    Full Text Available The goal of this study was to present regression models for predicting resistance of joints made with screw and plywood members. Joint members were out of hardwood plywood that were 19 mm in thickness. Two types of screws including coarse and fine thread drywall screw with 3.5, 4 and 5mm in diameter and sheet metal screw with 4 and 5mm were used. Results have shown that withdrawal resistance of screw was increased by increasing of screws, diameter and penetrating depth. Joints fabricated with coarse thread drywall screws were higher than those of fine thread drywall screws. Finally, average joint withdrawal resistance of screwed could be predicted by means of the expressions Wc=2.127×D1.072×P0.520 for coarse thread drywall screws and Wf=1.377×D1.156×P0.581 for fine thread drywall screws by taking account the diameter and penetrating depth. The difference of the observed and predicted data showed that developed models have a good correlation with actual experimental measurements.

  4. DNA damage response in a radiation resistant bacterium Deinococcus radiodurans: a paradigm shift

    International Nuclear Information System (INIS)

    Misra, H.S.

    2015-01-01

    Deinococcusradiodurans is best known for its extraordinary resistance to gamma radiation with its D 10 12kGy, and several other DNA damaging agents including desiccation to less than 5% humidity and chemical xenotoxicants. An efficient DNA double strand break (DSB) repair and its ability to protect biomolecules from oxidative damage are a few mechanisms attributed to these phenotypes in this bacterium. Although it regulates its proteome and transcriptome in response to DNA damage for its growth and survival, it lacks LexA mediated classical SOS response mechanism. Since LexA mediated damages response mechanism is highly and perhaps only, characterized DNA damage response processes in prokaryotes, this bacterium keeps us guessing how it responds to extreme doses of DNA damage. Interestingly, this bacterium encodes a large number of eukaryotic type serine threonine/tyrosine protein kinases (eST/YPK), phosphatases and response regulators and roles of eST/YPKs in cellular response to DNA damage and cell cycle regulations are well established in eukaryotes. Here, we characterized an antioxidant and DNA damage inducible eST/YPK (RqkA) and established its role in extraordinary radioresistance and DSB repair in this bacterium. We identified native phosphoprotein substrates for this kinase and demonstrated the involvement of some of these proteins phosphorylation in the regulation of DSB repair and growth under radiation stress. Findings suggesting the possible existence of eST/YPK mediated DNA damage response mechanism as an alternate to classical SOS response in this prokaryote would be discussed. (author)

  5. The 14 August 1708 Manosque, France earthquake: new constraintson the damage area from in-depth historical studies

    Directory of Open Access Journals (Sweden)

    A. Levret

    2004-06-01

    Full Text Available In this paper, we re-evaluate the damage area of the 14 August 1708 Manosque earthquake, Southeast France. It is the strongest event (Io = VIII MSK of a seismic sequence that lasted from March to October 1708. We show that the spatial repartition of the damage that can be proposed based on the existing sources, is clearly biased by the abundant narrative information concerning Manosque. This sparseness in the information can be attributed to differences in communication routes or strategies between the different localities, and affects the global perception of the event, especially in the rural area. To tackle this bias, we propose to inventory the building repairs reported in non-narrative sources in order to capture the effects of the Manosque earthquake in the surrounding region. The debates and accounts (between mid-1708 and 1710 show that moderate to heavy repairs consistently affect localities in the epicentral area, covering a region of at least 12 km radius around Manosque. These building repairs, indirectly attesting to earthquake damage, provide valuable and complementary information, which resulted in a better knowledge of this event. In particular, we propose new intensity estimates (I >VI at six localities.

  6. DEVELOPMENT OF DUAL ANCHORED SHEET PILE WALL METHOD TO INCREASE FRONT WATER DEPTH AND SEISMIC RESISTANCE OF EXISTING QUAY

    Science.gov (United States)

    Nakamura, Yasushi; Sato, Masakatsu; Kikuchi, Yoshiaki; Sugano, Takahiro; Morikawa, Yoshiyuki; Hoshino, Masami; Miki, Kenichi

    Recently the dual anchored sheet pile wall method has been developed to increase a front water depth and seismic resistance of existing quay walls by providing an additional anchor in the lower level of them to reduce a flexural moment of the sheet piles and a tension of the anchors. The existing technical information is not enough to evaluate the seismic behavior and the retrofit of the quay walls with anchors at two different levels. Therefore the experiments with a scale model set on the vibration table of the centrifugal apparatus as well as two dimensional effective stress analyses have been mobilized to investigate the seismic retrofit of the dual anchored sheet pile wall. The experiments and analyses demonstrate the increase the earthquake resistance of quay walls, because they showed the additional anchor can reduce the stress of the sheet walls to one half.

  7. Sea urchin coelomocytes are resistant to a variety of DNA damaging agents

    Energy Technology Data Exchange (ETDEWEB)

    Loram, Jeannette; Raudonis, Renee; Chapman, Jecar; Lortie, Mae [Bermuda Institute of Ocean Sciences, St. George' s, Bermuda, GE 01 (Bermuda); Bodnar, Andrea, E-mail: andrea.bodnar@bios.edu [Bermuda Institute of Ocean Sciences, St. George' s, Bermuda, GE 01 (Bermuda)

    2012-11-15

    Increasing anthropogenic activities are creating environmental pressures that threaten marine ecosystems. Effective environmental health assessment requires the development of rapid, sensitive, and cost-effective tools to predict negative impacts at the individual and ecosystem levels. To this end, a number of biological assays using a variety of cells and organisms measuring different end points have been developed for biomonitoring programs. The sea urchin fertilization/development test has been useful for evaluating environmental toxicology and it has been proposed that sea urchin coelomocytes represent a novel cellular biosensor of environmental stress. In this study we investigated the sensitivity of coelomocytes from the sea urchin Lytechinus variegatus to a variety of DNA-damaging agents including ultraviolet (UV) radiation, hydrogen peroxide (H{sub 2}O{sub 2}), methylmethane sulfonate (MMS) and benzo[a]pyrene (BaP). LD{sub 50} values determined for coelomocytes after 24 h of exposure to these DNA damaging agents indicated a high level of resistance to all treatments. Significant increases in the formation of apurinic/apyrimidinic (AP or abasic) sites in DNA were only detected using high doses of H{sub 2}O{sub 2}, MMS and UV radiation. Comparison of sea urchin coelomocytes with hemocytes from the gastropod mollusk Aplysia dactylomela and the decapod crustacean Panulirus argus indicated that sensitivity to different DNA damaging agents varies between species. The high level of resistance to genotoxic agents suggests that DNA damage may not be an informative end point for environmental health assessment using sea urchin coelomocytes however, natural resistance to DNA damaging agents may have implications for the occurrence of neoplastic disease in these animals.

  8. Sea urchin coelomocytes are resistant to a variety of DNA damaging agents.

    Science.gov (United States)

    Loram, Jeannette; Raudonis, Renee; Chapman, Jecar; Lortie, Mae; Bodnar, Andrea

    2012-11-15

    Increasing anthropogenic activities are creating environmental pressures that threaten marine ecosystems. Effective environmental health assessment requires the development of rapid, sensitive, and cost-effective tools to predict negative impacts at the individual and ecosystem levels. To this end, a number of biological assays using a variety of cells and organisms measuring different end points have been developed for biomonitoring programs. The sea urchin fertilization/development test has been useful for evaluating environmental toxicology and it has been proposed that sea urchin coelomocytes represent a novel cellular biosensor of environmental stress. In this study we investigated the sensitivity of coelomocytes from the sea urchin Lytechinus variegatus to a variety of DNA-damaging agents including ultraviolet (UV) radiation, hydrogen peroxide (H(2)O(2)), methylmethane sulfonate (MMS) and benzo[a]pyrene (BaP). LD(50) values determined for coelomocytes after 24h of exposure to these DNA damaging agents indicated a high level of resistance to all treatments. Significant increases in the formation of apurinic/apyrimidinic (AP or abasic) sites in DNA were only detected using high doses of H(2)O(2), MMS and UV radiation. Comparison of sea urchin coelomocytes with hemocytes from the gastropod mollusk Aplysia dactylomela and the decapod crustacean Panulirus argus indicated that sensitivity to different DNA damaging agents varies between species. The high level of resistance to genotoxic agents suggests that DNA damage may not be an informative end point for environmental health assessment using sea urchin coelomocytes however, natural resistance to DNA damaging agents may have implications for the occurrence of neoplastic disease in these animals. Copyright © 2012 Elsevier B.V. All rights reserved.

  9. Analysis of Depth of Ablation,Thermal Damage, Wound Healing, and Wound Contraction With Erbium YAG Laser in a Yorkshire Pig Model.

    Science.gov (United States)

    Alsaad, Salman M S; Ross, E Victor; Smith, Wiley J; DeRienzo, Damian P

    2015-11-01

    The erbium YAG laser is commonly used for skin resurfacing. It is known that varying the pulse duration can influence residual thermal damage and wound healing. Our study used a porcine model to evaluate a broad range of settings in a comparison of depth of ablation, depth of residual thermal damage (RTD), and wound contraction employing both a full coverage and fractional hand piece with an erbium YAG laser. The laser delivered an ablative pulse followed by a heating pulse of variable duration using either the full coverage or fractional hand piece. Pulse durations for specific coagulation depths were selected based on existing heat transfer models. The bilateral flanks of a single Yorkshire pig were irradiated. There were 14 treatment groups. 3 sites were treated per group for a total of 42 sites. Two of the 3 sites were for observational assessments and the 3rd site served as a reservoir for biopsies. Biopsy specimens were collected on days 0, 1, 3, 7, 14, and 28. Bleeding, erythema, wound healing, and wound contraction (in the fractional hand piece groups) were assessed. Wound healing is faster for fractional laser skin resurfacing compared with traditional contiguous resurfacing as demonstrated by textural changes and degree of erythema. The laser operator can be confident that the depth of ablation displayed on this system accurately reflects what is occurring in vivo for both confluent and fractional modes. Likewise, the measured degree of coagulation was consistent with panel display settings for the confluent mode. However, the degree of coagulation, as measured by the thickness of residual thermal damage, did not vary significantly between the fractional groups. In other words, the pulse duration of the second (heating) pulse did not impact the degree of coagulation in the fractional mode. There was a 2.3% wound contraction between some groups and a 6.5% wound contraction between other groups. A two way analysis of variance found a statistically

  10. Oxidative stress and protein damage responses mediate artemisinin resistance in malaria parasites.

    Science.gov (United States)

    Rocamora, Frances; Zhu, Lei; Liong, Kek Yee; Dondorp, Arjen; Miotto, Olivo; Mok, Sachel; Bozdech, Zbynek

    2018-03-01

    Due to their remarkable parasitocidal activity, artemisinins represent the key components of first-line therapies against Plasmodium falciparum malaria. However, the decline in efficacy of artemisinin-based drugs jeopardizes global efforts to control and ultimately eradicate the disease. To better understand the resistance phenotype, artemisinin-resistant parasite lines were derived from two clones of the 3D7 strain of P. falciparum using a selection regimen that mimics how parasites interact with the drug within patients. This long term in vitro selection induced profound stage-specific resistance to artemisinin and its relative compounds. Chemosensitivity and transcriptional profiling of artemisinin-resistant parasites indicate that enhanced adaptive responses against oxidative stress and protein damage are associated with decreased artemisinin susceptibility. This corroborates our previous findings implicating these cellular functions in artemisinin resistance in natural infections. Genomic characterization of the two derived parasite lines revealed a spectrum of sequence and copy number polymorphisms that could play a role in regulating artemisinin response, but did not include mutations in pfk13, the main marker of artemisinin resistance in Southeast Asia. Taken together, here we present a functional in vitro model of artemisinin resistance that is underlined by a new set of genetic polymorphisms as potential genetic markers.

  11. A Damage Resistance Comparison Between Candidate Polymer Matrix Composite Feedline Materials

    Science.gov (United States)

    Nettles, A. T

    2000-01-01

    As part of NASAs focused technology programs for future reusable launch vehicles, a task is underway to study the feasibility of using the polymer matrix composite feedlines instead of metal ones on propulsion systems. This is desirable to reduce weight and manufacturing costs. The task consists of comparing several prototype composite feedlines made by various methods. These methods are electron-beam curing, standard hand lay-up and autoclave cure, solvent assisted resin transfer molding, and thermoplastic tape laying. One of the critical technology drivers for composite components is resistance to foreign objects damage. This paper presents results of an experimental study of the damage resistance of the candidate materials that the prototype feedlines are manufactured from. The materials examined all have a 5-harness weave of IM7 as the fiber constituent (except for the thermoplastic, which is unidirectional tape laid up in a bidirectional configuration). The resin tested were 977-6, PR 520, SE-SA-1, RS-E3 (e-beam curable), Cycom 823 and PEEK. The results showed that the 977-6 and PEEK were the most damage resistant in all tested cases.

  12. Numerical Modeling for Impact-resistant Pipes Buried at Shallow Depth

    Science.gov (United States)

    Wang, Ching-Jong; Hsu, Jung-Fu

    2010-05-01

    The plastic pipes buried at shallow depth are popular for underground telecommunication lines. To assess their impact-worthiness under loads from heavy traffics, the study establishes a numerical model to correlate with field data. Field impact tests were carried out where a 50-kg mass free-falling at 2.2 m height was dropped onto the soil backfill directly above a buried pipe. A contact-impact model incorporating finite elements of disjoined material regions is developed to simulate the phenomena of mass-soil-pipe interaction and soil dent. Plastic soil deformations are accounted for. Also implemented is a new erosion scheme for dealing with numerical instability caused by crumpled elements during heavy impact. Reasonable agreements can be observed between the analyzed and measured soil dent. This model is versatile in making design evaluations for buried pipes to withstand impact loads. It has potential applications to cemented soil fills and blast loads.

  13. Decreased drug accumulation and increased tolerance to DNA damage in tumor cells with a low level of cisplatin resistance.

    Science.gov (United States)

    Lanzi, C; Perego, P; Supino, R; Romanelli, S; Pensa, T; Carenini, N; Viano, I; Colangelo, D; Leone, R; Apostoli, P; Cassinelli, G; Gambetta, R A; Zunino, F

    1998-04-15

    In an attempt to examine the cellular changes associated with cisplatin resistance, we selected a cisplatin-resistant (A43 1/Pt) human cervix squamous cell carcinoma cell line following continuous in vitro drug exposure. The resistant subline was characterized by a 2.5-fold degree of resistance. In particular, we investigated the expression of cellular defence systems and other cellular factors probably involved in dealing with cisplatin-induced DNA damage. Resistant cells exhibited decreased platinum accumulation and reduced levels of DNA-bound platinum and interstrand cross-link frequency after short-term drug exposure. Analysis of the effect of cisplatin on cell cycle progression revealed a cisplatin-induced G2M arrest in sensitive and resistant cells. Interestingly, a slowdown in S-phase transit was found in A431/Pt cells. A comparison of the ability of sensitive and resistant cells to repair drug-induced DNA damage suggested that resistant cells were able to tolerate higher levels of cisplatin-induced DNA damage than their parental counterparts. Analysis of the expression of proteins involved in DNA mismatch repair showed a decreased level of MSH2 in resistant cells. Since MSH2 seems to be involved in recognition of drug-induced DNA damage, this change may account for the increased tolerance to DNA damage observed in the resistant subline. In conclusion, the involvement of accumulation defects and the increased tolerance to cisplatin-induced DNA damage in these cisplatin-resistant cells support the notion that multiple changes contribute to confer a low level of cisplatin resistance.

  14. The resistance of Micrococcus radiodurans to killing and mutation by agents which damage DNA

    International Nuclear Information System (INIS)

    Sweet, D.M.; Moseley, B.E.B.

    1976-01-01

    The resistance of Micrococcus radiodurans to the lethal and mutagenic action of ultraviolet (UV) light, ionising (γ) radiation, mitomycin C (MTC), nitrous acid (NA), hydroxylamine (HA), N-methyl-N'-nitro-N-nitrosoguanidine (NG), ethylmethanesulphonate (EMS) and β-propiolactone (βPL) has been compared with that of Escherichia coli B/r. M. radiodurans was much more resistant than E. coli B/r to the lethal effects of UV light (by a factor of 33), γ-radiation (55), NG (15) and NA (62), showed intermediate resistance to MTC (4) and HA (7), but was sensitive to EMS (1) and βPL (2). M. radiodurans was very resistant to mutagens producing damage which can be repaired by a recombination system, indicating that it possesses an extremely efficient recombination repair mechanism. Both species were equally sensitive to mutation to trimethoprim resistance by NG, but M. radiodurans was more resistant than E. coli B/r to the other mutagens tested, being non-mutable by UV light, γ-radiation, MTC and HA, and only slightly sensitive to mutation by NA, EMS, and βPL. The resistance of M. radiodurans to mutation by UV light, γ-radiation and MTC is consistent with an hypothesis that recombination repair in M. radiodurans is accurate since these mutagens may depend on an 'error-prone' recombination system for their mutagenic effect in E. coli B/r. However, because M. radiodurans is also resistant to mutagens such as HA and EMS, which are mutagenic in E. coli in the absence of an 'error-prone' system, we propose that all the mutagens tested may have a common mode of action in E. coli B/r, but that this mutagenic pathway is missing in M. radiodurans

  15. Development of damage-resistant sputtered-oxide optical coatings for use at 248 NM

    International Nuclear Information System (INIS)

    Pawlewicz, W.T.; Martin, P.M.; Hays, D.D.; Mann, I.B.

    1981-10-01

    This report summarizes the results of a six-month effort to develop damage-resistant Kr*F laser mirrors by using and refining reactive sputter deposition techniques for the fabricaton of multilayer oxide optical coatings. Mirror performance goals included a reflectivity of 99% at 248 nm and a laser damage threshold of 5 J/cm 2 for 20 ns pulses. Oxide multilayer coating combinations selected for development were SiO 2 /Al 2 O 3 , SiO 2 /HfO 2 and SiO 2 /Y 2 O 3 . Selection was based on review and compilation of the optical properties of oxide materials reported in the recent literature. Twenty-eight coatings of selected designs were fabricated on LLNL substrates for laser damage testing by LLNL. Forty other coatings were fabricated on PNL substrates for optical, microstructural and topographical characterization by PNL aimed at optimization of their performance. Specimens for damage testing consisted of single layers of Al 2 O 3 , HfO 2 and Y 2 O 3 in thicknesses of lambda/2, 3lambda/2 and 2lambda at 248 nm plus high reflectors of the design LL (HL)/sup m/ HLL

  16. Evaluating the thermal damage resistance of graphene/carbon nanotube hybrid composite coatings

    Science.gov (United States)

    David, L.; Feldman, A.; Mansfield, E.; Lehman, J.; Singh, G.

    2014-03-01

    We study laser irradiation behavior of multiwalled carbon nanotubes (MWCNT) and chemically modified graphene (rGO)-composite spray coatings for use as a thermal absorber material for high-power laser calorimeters. Spray coatings on aluminum test coupon were exposed to increasing laser irradiance for extended exposure times to quantify their damage threshold and optical absorbance. The coatings, prepared at varying mass % of MWCNTs in rGO, demonstrated significantly higher damage threshold values at 2.5 kW laser power at 10.6 μm wavelength than carbon paint or MWCNTs alone. Electron microscopy and Raman spectroscopy of irradiated specimens show that the coating prepared at 50% CNT loading endure at least 2 kW.cm-2 for 10 seconds without significant damage. The improved damage resistance is attributed to the unique structure of the composite in which the MWCNTs act as an efficient absorber of laser light while the much larger rGO sheets surrounding them, dissipate the heat over a wider area.

  17. Impact of Insulin Resistance on Silent and Ongoing Myocardial Damage in Normal Subjects: The Takahata Study

    Directory of Open Access Journals (Sweden)

    Taro Narumi

    2012-01-01

    Full Text Available Background. Insulin resistance (IR is part of the metabolic syndrome (Mets that develops after lifestyle changes and obesity. Although the association between Mets and myocardial injury is well known, the effect of IR on myocardial damage remains unclear. Methods and Results. We studied 2200 normal subjects who participated in a community-based health check in the town of Takahata in northern Japan. The presence of IR was assessed by homeostasis model assessment ratio, and the serum level of heart-type fatty acid binding protein (H-FABP was measured as a maker of silent and ongoing myocardial damage. H-FABP levels were significantly higher in subjects with IR and Mets than in those without metabolic disorder regardless of gender. Multivariate logistic analysis showed that the presence of IR was independently associated with latent myocardial damage (odds ratio: 1.574, 95% confidence interval 1.1–2.3 similar to the presence of Mets. Conclusions. In a screening of healthy subjects, IR and Mets were similarly related to higher H-FABP levels, suggesting that there may be an asymptomatic population in the early stages of metabolic disorder that is exposed to myocardial damage and might be susceptible to silent heart failure.

  18. Development of damage resistant sputtered oxide optical coatings for use at 248 NM

    Energy Technology Data Exchange (ETDEWEB)

    Pawlewicz, W.T.; Martin, P.M.; Hays, D.D.; Mann, I.B.

    1981-10-01

    This report summarizes the results of a six-month effort to develop damage-resistant Kr*F laser mirrors by using and refining reactive sputter deposition techniques for the fabricaton of multilayer oxide optical coatings. Mirror performance goals included a reflectivity of 99% at 248 nm and a laser damage threshold of 5 J/cm/sup 2/ for 20 ns pulses. Oxide multilayer coating combinations selected for development were SiO/sub 2//Al/sub 2/O/sub 3/, SiO/sub 2//HfO/sub 2/ and SiO/sub 2//Y/sub 2/O/sub 3/. Selection was based on review and compilation of the optical properties of oxide materials reported in the recent literature. Twenty-eight coatings of selected designs were fabricated on LLNL substrates for laser damage testing by LLNL. Forty other coatings were fabricated on PNL substrates for optical, microstructural and topographical characterization by PNL aimed at optimization of their performance. Specimens for damage testing consisted of single layers of Al/sub 2/O/sub 3/, HfO/sub 2/ and Y/sub 2/O/sub 3/ in thicknesses of lambda/2, 3lambda/2 and 2lambda at 248 nm plus high reflectors of the design LL (HL)/sup m/ HLL.

  19. Optimized adhesives for strong, lightweight, damage-resistant, nanocomposite materials: new insights from natural materials

    International Nuclear Information System (INIS)

    Hansma, P K; Turner, P J; Ruoff, R S

    2007-01-01

    From our investigations of natural composite materials such as abalone shell and bone we have learned the following. (1) Nature is frugal with resources: it uses just a few per cent glue, by weight, to glue together composite materials. (2) Nature does not avoid voids. (3) Nature makes optimized glues with sacrificial bonds and hidden length. We discuss how optimized adhesives combined with high specific stiffness/strength structures such as carbon nanotubes or graphene sheets could yield remarkably strong, lightweight, and damage-resistant materials

  20. Optimized adhesives for strong, lightweight, damage-resistant, nanocomposite materials: new insights from natural materials

    Energy Technology Data Exchange (ETDEWEB)

    Hansma, P K [Physics Department, Broida Hall, University of California, Santa Barbara, CA 93106 (United States); Turner, P J [Physics Department, Broida Hall, University of California, Santa Barbara, CA 93106 (United States); Ruoff, R S [Department of Mechanical Engineering, Northwestern University, 2145 Sheridan Road, Evanston, IL 60208-3111 (United States)

    2007-01-31

    From our investigations of natural composite materials such as abalone shell and bone we have learned the following. (1) Nature is frugal with resources: it uses just a few per cent glue, by weight, to glue together composite materials. (2) Nature does not avoid voids. (3) Nature makes optimized glues with sacrificial bonds and hidden length. We discuss how optimized adhesives combined with high specific stiffness/strength structures such as carbon nanotubes or graphene sheets could yield remarkably strong, lightweight, and damage-resistant materials.

  1. Potential Mechanisms for Cancer Resistance in Elephants and Comparative Cellular Response to DNA Damage in Humans.

    Science.gov (United States)

    Abegglen, Lisa M; Caulin, Aleah F; Chan, Ashley; Lee, Kristy; Robinson, Rosann; Campbell, Michael S; Kiso, Wendy K; Schmitt, Dennis L; Waddell, Peter J; Bhaskara, Srividya; Jensen, Shane T; Maley, Carlo C; Schiffman, Joshua D

    2015-11-03

    Evolutionary medicine may provide insights into human physiology and pathophysiology, including tumor biology. To identify mechanisms for cancer resistance in elephants and compare cellular response to DNA damage among elephants, healthy human controls, and cancer-prone patients with Li-Fraumeni syndrome (LFS). A comprehensive survey of necropsy data was performed across 36 mammalian species to validate cancer resistance in large and long-lived organisms, including elephants (n = 644). The African and Asian elephant genomes were analyzed for potential mechanisms of cancer resistance. Peripheral blood lymphocytes from elephants, healthy human controls, and patients with LFS were tested in vitro in the laboratory for DNA damage response. The study included African and Asian elephants (n = 8), patients with LFS (n = 10), and age-matched human controls (n = 11). Human samples were collected at the University of Utah between June 2014 and July 2015. Ionizing radiation and doxorubicin. Cancer mortality across species was calculated and compared by body size and life span. The elephant genome was investigated for alterations in cancer-related genes. DNA repair and apoptosis were compared in elephant vs human peripheral blood lymphocytes. Across mammals, cancer mortality did not increase with body size and/or maximum life span (eg, for rock hyrax, 1% [95% CI, 0%-5%]; African wild dog, 8% [95% CI, 0%-16%]; lion, 2% [95% CI, 0%-7%]). Despite their large body size and long life span, elephants remain cancer resistant, with an estimated cancer mortality of 4.81% (95% CI, 3.14%-6.49%), compared with humans, who have 11% to 25% cancer mortality. While humans have 1 copy (2 alleles) of TP53, African elephants have at least 20 copies (40 alleles), including 19 retrogenes (38 alleles) with evidence of transcriptional activity measured by reverse transcription polymerase chain reaction. In response to DNA damage, elephant lymphocytes underwent p53-mediated apoptosis

  2. Mouse Rad9b is essential for embryonic development and promotes resistance to DNA damage

    Science.gov (United States)

    Leloup, Corinne; Hopkins, Kevin M.; Wang, Xiangyuan; Zhu, Aiping; Wolgemuth, Debra J.; Lieberman, Howard B.

    2010-01-01

    RAD9 participates in promoting resistance to DNA damage, cell cycle checkpoint control, DNA repair, apoptosis, embryogenesis, and regulation of transcription. A paralogue of RAD9 (named RAD9B) has been identified. To define the function of mouse Rad9b (Mrad9b), embryonic stem (ES) cells with a targeted gene deletion were constructed and used to generate Mrad9b mutant mice. Mrad9b−/− embryos are resorbed after E7.5 while some of the heterozygotes die between E12.5 and a few days after birth. Mrad9b is expressed in embryonic brain and Mrad9b+/− embryos exhibit abnormal neural tube closure. Mrad9b−/− mouse embryonic fibroblasts are not viable. Mrad9b−/− ES cells are more sensitive to gamma rays and mitomycin C than Mrad9b+/+ controls, but show normal gamma-ray-induced G2/M checkpoint control. There is no evidence of spontaneous genomic instability in Mrad9b−/− cells. Our findings thus indicate that Mrad9b is essential for embryonic development and mediates resistance to certain DNA damaging agents. PMID:20842695

  3. Damage resistant optics for a mega-joule solid-state laser

    International Nuclear Information System (INIS)

    Campbell, J.H.; Rainer, F.; Kozlowski, M.; Wolfe, C.R.; Thomas, I.; Milanovich, F.

    1990-01-01

    Research on Inertial Confinement Fusion (ICF) has progressed rapidly in the past several years. As a consequence, LLNL is developing plans to upgrade the current 120 kJ solid state (Nd +3 -phosphate glass) Nova laser to a 1.5 to 2 megajoule system with the goal of achieving fusion ignition. The design of the planned Nova Upgrade is briefly discussed. Because of recent improvements in the damage resistance of optical materials it is now technically and economically feasible to build a megajoule-class solid state laser. Specifically, the damage threshold of Nd +3 -doped phosphate laser glass, multilayer dielectric coatings, and non-linear optical crystals (e.g., KDP) have been dramatically improved. These materials now meet the fluence requirements for a 1.5--2 MJ Nd 3+ -glass laser operating at 1054 and 351 nm and at a pulse length of 3 ns. The recent improvements in damage thresholds are reviewed; threshold data at both 1064 and 355 nm and the measured pulse length scaling are presented. 20 refs., 9 figs., 2 tabs

  4. Resistivity tomography using borehole of 500m in depth at the seaside site; 500m shin boring wo mochiita kaigan fukin deno hiteiko tomography tansa

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, K. [Central Research Institute of Electric Power Industry, Tokyo (Japan); Kono, T. [Radioactive Waste Management Center, Tokyo (Japan); Chiba, A. [Sumitomo Metal Industries, Ltd., Osaka (Japan)

    1997-10-22

    With an objective to verify exploration methods to identify geological structures to a depth of about 500 m and continuity of fissure zones, a case study was carried out on a resistivity tomography method using ground surface exploration by means of the resistivity method and boreholes of 500 m in depth. The investigated area is consisted of abyssal rocks of the Cretaceous period, where granodiorites of coarse grain and intrusive rocks of small scale are distributed. Fissures on the ground surface have gentle inclination, and are of opening type showing high water permeability. The data analysis has derived apparent resistivities in the Wenner electrode arrangement, the Eltran electrode arrangement and the pole-pole electrode arrangement. The resistivity tomography has derived apparent resistivity in the pole-dipole electrode arrangement which is relatively high in accuracy and strong against noise. As a result of inputting these resistivities and performing an analysis on a two-dimensional resistivity structure, a structure of 100-m scale was made clear, in which difference of the resistivity values is distinct. The result of the resistivity tomography may be thought to have identified the resistivity anomaly of a small scale, although the absolute values show some variation. 4 refs., 5 figs., 2 tabs.

  5. The Electrical Resistivity and Acoustic Emission Response Law and Damage Evolution of Limestone in Brazilian Split Test

    Directory of Open Access Journals (Sweden)

    Xinji Xu

    2016-01-01

    Full Text Available The Brazilian split test was performed on two groups of limestone samples with loading directions vertical and parallel to the bedding plane, and the response laws of the electrical resistivity and acoustic emission (AE in the two loading modes were obtained. The test results showed that the Brazilian split test with loading directions vertical and parallel to the bedding showed obviously different results and anisotropic characteristics. On the basis of the response laws of the electrical resistivity and AE, the damage variables based on the electrical resistivity and AE properties were modified, and the evolution laws of the damage variables in the Brazilian split test with different loading directions were obtained. It was found that the damage evolution laws varied with the loading direction. Specifically, in the time-varying curve of the damage variable with the loading direction vertical to the bedding, the damage variable based on electrical resistivity properties showed an obvious damage weakening stage while that based on AE properties showed an abrupt increase under low load.

  6. Tacrolimus reversibly reduces insulin secretion, induces insulin resistance, and causes islet cell damage in rats.

    Science.gov (United States)

    Xu, Chun; Niu, Yu-Jian; Liu, Xiao-Jun; Teng, Ya-Qin; Li, Chun-Feng; Wang, Hong-Yu; Yin, Jun-Ping; Wang, Le-Tian; Shen, Zhong-Yang

    2014-07-01

    To investigate the diabetogenic effects of the immunosuppressive agent tacrolimus, the reversibility of these effects upon treatment discontinuation, and the underlying mechanisms in a rat model. 60 healthy male rats were randomly divided into three groups for intragastric administration of tacrolimus either at 4 mg/kg/d or 2 mg/kg/d or an equal volume of normal saline (control). The treatment was administered for 5 months, followed by a 5-month period of no intervention. Fasting plasma glucose and insulin levels were used to calculate the homeostasis model assessment of ß-cell function (HOMA-ß) and insulin sensitivity index (ISI). Tacrolimus treatment significantly increased blood glucose concentrations (p insulin secretion pathway, local and/or systemic insulin resistance, and islet cell damage.

  7. Noncanonical regulation of alkylation damage resistance by the OTUD4 deubiquitinase.

    Science.gov (United States)

    Zhao, Yu; Majid, Mona C; Soll, Jennifer M; Brickner, Joshua R; Dango, Sebastian; Mosammaparast, Nima

    2015-06-12

    Repair of DNA alkylation damage is critical for genomic stability and involves multiple conserved enzymatic pathways. Alkylation damage resistance, which is critical in cancer chemotherapy, depends on the overexpression of alkylation repair proteins. However, the mechanisms responsible for this upregulation are unknown. Here, we show that an OTU domain deubiquitinase, OTUD4, is a positive regulator of ALKBH2 and ALKBH3, two DNA demethylases critical for alkylation repair. Remarkably, we find that OTUD4 catalytic activity is completely dispensable for this function. Rather, OTUD4 is a scaffold for USP7 and USP9X, two deubiquitinases that act directly on the AlkB proteins. Moreover, we show that loss of OTUD4, USP7, or USP9X in tumor cells makes them significantly more sensitive to alkylating agents. Taken together, this work reveals a novel, noncanonical mechanism by which an OTU family deubiquitinase regulates its substrates, and provides multiple new targets for alkylation chemotherapy sensitization of tumors. © 2015 The Authors.

  8. DEPENDENCE OF DISTRIBUTION FUNCTION OF COMMERCIAL DAMAGES DUE TO POSSIBLE EARTHQUAKES ON THE CLASS OF SEISMIC RESISTANCE OF A BUILDING

    Directory of Open Access Journals (Sweden)

    Hanzada R. Zajnulabidova

    2017-01-01

    Full Text Available Abstract. Objectives To determine the damage probability of earthquakes of different intensities on the example of a real projected railway station building having a framework design scheme based on the density function of damage distribution. Methods Uncertainty, always existing in nature, invalidates a deterministic approach to the assessment of territorial seismic hazards and, consequently, seismic risk. In this case, seismic risk assessment can be carried out on a probabilistic basis. Thus, the risk will always be there, but it must be minimised. The task of optimising the reinforcement costs is solved by using the density distribution function for seismic effects of varying intensity, taking into account the degree of building responsibility. Results The distribution functions of the expected damage for a building with a reinforced concrete frame located in a highly seismic region with a repetition of 9-point shocks every 500 years and 10-point shocks once every 5000 years are constructed. A significant effect of the seismic resistance class of a building on the form of the distribution functions is shown. For structures of a high seismic resistance class, not only is the seismic risk reduced, but also the variance of the expected damage. From the graphs obtained, it can be seen that the seismic resistance class significantly affects the damage distribution. At a probability of 0.997, the expected damage for a non-reinforced building will exceed 43%; for a reinforced one it is only 10%. It also follows from the graphs that the variance of the damage magnitude decreases with the growth of the seismic resistance class of the building. This fact is an additional incentive for investing in antiseismic reinforcement of buildings. Conclusion The study shows the expediency of working with the damage density distribution function when managing seismic risk. In this case, it becomes possible to strengthen the building with a specified probability of

  9. Correlation of insulin resistance extent with systemic inflammatory response and target organ damage in children with sepsis

    OpenAIRE

    Min Liu

    2017-01-01

    Objective: To explore the correlation of insulin resistance (IR) extent with systemic inflammatory response and target organ damage in children with sepsis. Methods: A total of 70 patients with sepsis who were treated in our hospital between June 2013 and July 2016 were collected as observation group, 50 healthy children who received vaccination in our hospital during the same period were selected as normal control group, the insulin resistance index (HOMA-IR) of two groups of ...

  10. Green synthesized silver nanoparticles destroy multidrug resistant bacteria via reactive oxygen species mediated membrane damage

    Directory of Open Access Journals (Sweden)

    Balaram Das

    2017-09-01

    Full Text Available The growing need of antimicrobial agent for novel therapies against multi-drug resistant bacteria has drawn researchers to green nanotechnology. Especially, eco-friendly biosynthesis of silver nanoparticles (Ag NPs has shown its interesting impact against bacterial infection in laboratory research. In this study, a simple method was developed to form Ag NPs at room temperature, bio-reduction of silver ions from silver nitrate salt by leaf extract from Ocimum gratissimum. The Ag NPs appear to be capped with plant proteins, but are otherwise highly crystalline and pure. The Ag NPs have a zeta potential of −15 mV, a hydrodynamic diameter of 31 nm with polydispersity index of 0.65, and dry sizes of 18 ± 3 nm and 16 ± 2 nm, based on scanning and transmission electron microscopy respectively. The minimum inhibitory concentration (MIC of the Ag NPs against a multi-drug resistant Escherichia coli was 4 μg/mL and the minimum bactericidal concentration (MBC was 8 μg/mL, while the MIC and MBC against a resistant strain of Staphylococcus aureus were slightly higher at 8 μg/mL and 16 μg/mL respectively. Further, the Ag NPs inhibited biofilm formation by both Escherichia coli and S. aureus at concentrations similar to the MIC for each strain. Treatment of E. coli and S. aureus with Ag NPs resulted in damage to the surface of the cells and the production of reactive oxygen species. Both mechanisms likely contribute to bacterial cell death. In summary, this new method appears promising for green biosynthesis of pure Ag NPs with potent antimicrobial activity.

  11. Depth of morphologic skin damage and viability after one, two, and three passes of a high-energy, short-pulse CO2 laser (Tru-Pulse) in pig skin.

    Science.gov (United States)

    Smith, K J; Skelton, H G; Graham, J S; Hamilton, T A; Hackley, B E; Hurst, C G

    1997-08-01

    CO2 laser energy is absorbed by water, which is present in all tissue. The depth of penetration of CO2 lasers is narrow with minimal reflection, scatter, or transmission. However, thermal damage has limited the usefulness of conventional, continuous-wave CO2 lasers for debridement as demonstrated by wound healing studies. The development of high-energy CO2 lasers, with pulse durations that are less than the thermal relaxation time of tissue, have made vaporization of skin for resurfacing and wound debridement possible because of the decreased risk of thermal damage. This study was performed to evaluate thermal damage produced by a CO2 laser. Routine histopathologic examination and nitroblue-tetrazolium chloride (NBTC) staining were used to evaluate the depth of tissue damage and viability in weanling pig skin after one, two, and three passes of the laser. At a pulse energy of 300 mJ, with a pulse duration of 60 microseconds, one pass of the laser produced vaporization of the epidermis with minimal thermal damage. Two passes produced areas of denatured collagen with loss of viable cells in the superficial papillary dermis. Three passes extended the damage into the papillary dermis. Hyalinization of collagen appears to correspond well with the level of thermal damage as measured by NBTC staining. Our findings suggest that the energy necessary to vaporize the dermis may be greater than that needed to vaporize epidermis.

  12. MUSCLE STRENGTH AND DAMAGE FOLLOWING TWO MODES OF VARIABLE RESISTANCE TRAINING

    Directory of Open Access Journals (Sweden)

    Saied Jalal Aboodarda

    2011-12-01

    Full Text Available Nautilus Machine (NM and Elastic Resistance (ER have gained considerable popularity among athletes and recreational lifters seeking to increase muscle strength. However, there is controversy concerning the use of ER for increasing muscle hypertrophy and strength among healthy-trained individuals. The aim of the study was to compare the effect of repeated near maximal contractions by ER/NM on indicators of muscle damage including: maximal strength decrement (MVIC, rate of muscle soreness (DOMS, concentration of plasma creatine kinase (CK and increased high muscle signal on T2 weighted images using magnetic resonance imaging (MRI. Nine healthy male subjects completed two modalities of exercise (5 sets × 10RM ER/NM in a counterbalance cross-over study design with three weeks "wash-out" period between experiments. The MVIC was measured and DOMS rated and recorded for 4 consecutive days while blood samples were collected on day 1, 3, 5 and 7. Prior to and forty eight hours after completion of each mode of exercise, subjects underwent MRI scanning. The average of applied forces demonstrated significantly higher value for NM compared with ER (362 ± 34.2 N vs 266.73 ± 44.6 N respectively throughout the 5 sets of dynamic exercise (all p < 0.05. However, the indicators of muscle damage (T2 relaxation time, DOMS, MVIC and serum CK exhibited a very similar response across both modes of training. Plasma CK increased significantly following both modes of training with the peak value on Day 3 (p < 0.05. The time course of muscle soreness reached a significant level after both modes of exercise and showed a peak value on the 2nd day (p < 0.05. The T2 relaxation time demonstrated a statistically significant increase following ER and NM compared with the pre-test value (p < 0.05. The similarity of these responses following both the ER and NM exercise training session suggests that both modes of training provide a similar training stress; despite a considerably

  13. The Aspergillus fumigatus Damage Resistance Protein Family Coordinately Regulates Ergosterol Biosynthesis and Azole Susceptibility

    Directory of Open Access Journals (Sweden)

    Jinxing Song

    2016-02-01

    Full Text Available Ergosterol is a major and specific component of the fungal plasma membrane, and thus, the cytochrome P450 enzymes (Erg proteins that catalyze ergosterol synthesis have been selected as valuable targets of azole antifungals. However, the opportunistic pathogen Aspergillus fumigatus has developed worldwide resistance to azoles largely through mutations in the cytochrome P450 enzyme Cyp51 (Erg11. In this study, we demonstrate that a cytochrome b5-like heme-binding damage resistance protein (Dap family, comprised of DapA, DapB, and DapC, coordinately regulates the functionality of cytochrome P450 enzymes Erg5 and Erg11 and oppositely affects susceptibility to azoles. The expression of all three genes is induced in an azole concentration-dependent way, and the decreased susceptibility to azoles requires DapA stabilization of cytochrome P450 protein activity. In contrast, overexpression of DapB and DapC causes dysfunction of Erg5 and Erg11, resulting in abnormal accumulation of sterol intermediates and further accentuating the sensitivity of ΔdapA strains to azoles. The results of exogenous-hemin rescue and heme-binding-site mutagenesis experiments demonstrate that the heme binding of DapA contributes the decreased azole susceptibility, while DapB and -C are capable of reducing the activities of Erg5 and Erg11 through depletion of heme. In vivo data demonstrate that inactivated DapA combined with activated DapB yields an A. fumigatus mutant that is easily treatable with azoles in an immunocompromised mouse model of invasive pulmonary aspergillosis. Compared to the single Dap proteins found in Saccharomyces cerevisiae and Schizosaccharomyces pombe, we suggest that this complex Dap family regulatory system emerged during the evolution of fungi as an adaptive means to regulate ergosterol synthesis in response to environmental stimuli.

  14. Designing Multiagent Dental Materials for Enhanced Resistance to Biofilm Damage at the Bonded Interface.

    Science.gov (United States)

    Melo, Mary Anne; Orrego, Santiago; Weir, Michael D; Xu, Huakun H K; Arola, Dwayne D

    2016-05-11

    The oral environment is considered to be an asperous environment for restored tooth structure. Recurrent dental caries is a common cause of failure of tooth-colored restorations. Bacterial acids, microleakage, and cyclic stresses can lead to deterioration of the polymeric resin-tooth bonded interface. Research on the incorporation of cutting-edge anticaries agents for the design of new, long-lasting, bioactive resin-based dental materials is demanding and provoking work. Released antibacterial agents such as silver nanoparticles (NAg), nonreleased antibacterial macromolecules (DMAHDM, dimethylaminohexadecyl methacrylate), and released acid neutralizer amorphous calcium phosphate nanoparticles (NACP) have shown potential as individual and dual anticaries approaches. In this study, these agents were synthesized, and a prospective combination was incorporated into all the dental materials required to perform a composite restoration: dental primer, adhesive, and composite. We focused on combining different dental materials loaded with multiagents to improve the durability of the complex dental bonding interface. A combined effect of bacterial acid attack and fatigue on the bonding interface simulated the harsh oral environment. Human saliva-derived oral biofilm was grown on each sample prior to the cyclic loading. The oral biofilm viability during the fatigue performance was monitored by the live-dead assay. Damage of the samples that developed during the test was quantified from the fatigue life distributions. Results indicate that the resultant multiagent dental composite materials were able to reduce the acidic impact of the oral biofilm, thereby improving the strength and resistance to fatigue failure of the dentin-resin bonded interface. In summary, this study shows that dental restorative materials containing multiple therapeutic agents of different chemical characteristics can be beneficial toward improving resistance to mechanical and acidic challenges in oral

  15. Theory of the high base resistivity n(+)pp(+) silicon solar cell and its application to radiation damage effects

    Science.gov (United States)

    Goradia, C.; Weinberg, I.

    1985-01-01

    Particulate radiation in space is a principal source of silicon solar cell degradation, and an investigation of cell radiation damage at higher base resistivities appears to have implication toward increasing solar cell and, therefore, useful satellite lifetimes in the space environment. However, contrary to expectations, it has been found that for cells with resistivities of 84 and 1250 ohm cm, the radiation resistance decreases as cell base resistivity increases. An analytical solar-cell computer model was developed with the objective to determine the reasons for this unexpected behavior. The present paper has the aim to describe the analytical model and its use in interpreting the behavior, under irradiation, of high-resistivity solar cells. Attention is given to boundary conditions at the space-charge region edges, cell currents, cell voltages, the generation of the theoretical I-V characteristic, experimental results, and computer calculations.

  16. [Variability of hemodynamic parameters and resistance to stress damage in rats of different strains].

    Science.gov (United States)

    Belkina, L M; Popkova, E V; Lakomkin, V L; Kirillina, T N; Zhukova, A G; Sazontova, T G; Usacheva, M A; Kapel'ko, V I

    2006-02-01

    Total power of heart rate variability and baroreflex sensitivity were significantly smaller in the August rats than in the Wistar rats, but adrenal and plasma catecholamine contents were considerably higher in the former ones. 1 hour after stress (30 min in cold water), plasma catecholamine was increased 2-fold in Wistar rats, while in August rats the adrenaline concentration increased only by 58% and the were no changes in noradrenaline content. At the same time, activation of catecholamine metabolism in the adrenal glands was similar in both groups. The oxidative stress induced by hydrogen peroxide depressed the contractile function of isolated heart in the August rats to a smaller extent as compared to Wistar rats, control ones and after the cold-water stress. This effect correlated with more pronounced stability ofantioxidant enzymes in the August rats. It seems that the greater resistance to stress damage in the August rats is mediated by enhanced power of defense mechanisms both at systemic and cellular levels.

  17. On the relationship between indentation hardness and modulus, and the damage resistance of biological materials.

    Science.gov (United States)

    Labonte, David; Lenz, Anne-Kristin; Oyen, Michelle L

    2017-07-15

    The remarkable mechanical performance of biological materials is based on intricate structure-function relationships. Nanoindentation has become the primary tool for characterising biological materials, as it allows to relate structural changes to variations in mechanical properties on small scales. However, the respective theoretical background and associated interpretation of the parameters measured via indentation derives largely from research on 'traditional' engineering materials such as metals or ceramics. Here, we discuss the functional relevance of indentation hardness in biological materials by presenting a meta-analysis of its relationship with indentation modulus. Across seven orders of magnitude, indentation hardness was directly proportional to indentation modulus. Using a lumped parameter model to deconvolute indentation hardness into components arising from reversible and irreversible deformation, we establish criteria which allow to interpret differences in indentation hardness across or within biological materials. The ratio between hardness and modulus arises as a key parameter, which is related to the ratio between irreversible and reversible deformation during indentation, the material's yield strength, and the resistance to irreversible deformation, a material property which represents the energy required to create a unit volume of purely irreversible deformation. Indentation hardness generally increases upon material dehydration, however to a larger extent than expected from accompanying changes in indentation modulus, indicating that water acts as a 'plasticiser'. A detailed discussion of the role of indentation hardness, modulus and toughness in damage control during sharp or blunt indentation yields comprehensive guidelines for a performance-based ranking of biological materials, and suggests that quasi-plastic deformation is a frequent yet poorly understood damage mode, highlighting an important area of future research. Instrumented

  18. Effects of resistance exercise and the use of anabolic androgenic steroids on hemodynamic characteristics and muscle damage markers in bodybuilders.

    Science.gov (United States)

    Nasseri, Azadeh; Nadimi, Amir; Nikookheslat, Saeed D

    2016-09-01

    Anabolic androgenic steroids (AAS), synthetic compounds of testosterone commonly used as sport performance enhancers, could cause cardiovascular dysfunction and cell damage. Even though the side effects of AAS intake have been widely studied, yet little is known about how resistance exercise can alter these side effects. This study aimed to determine the effects of one session resistance exercise and the use of AAS on hemodynamic characteristics and muscle damage markers in professional bodybuilders. Sixteen bodybuilders were divided into two groups: bodybuilders using AAS for at least 5 years (users; N.=8) and AAS-free bodybuilders (non-users; N.=8). The exercise protocol was a circuit strength training session involved three sets of 8-9 repetitions at 80-85% of 1-RM. Heart rate (HR), blood pressure (BP) and concentrations of serum creatine kinase (CK) and lactate dehydrogenase (LDH) were measured at three different time points, immediately before and after the exercise session and 24 hours following the exercise session. The users group showed greater basal levels of hemodynamic characteristics (i.e. HR and BP) and cell damage markers (i.e. CK and LDH) compared to those in the non-users group (all P0.05). These findings indicate that the use of AAS could be potentially harmful as it enhances the levels of the hemodynamic characteristics and the muscle enzymes. These harmful effects of AAS intake could be more evident in response to resistance exercise.

  19. Wnt and β-Catenin Signaling and Skeletal Muscle Myogenesis in Response to Muscle Damage and Resistance Exercise and Training

    Directory of Open Access Journals (Sweden)

    Dan Newmire

    2015-10-01

    Full Text Available The factors that regulate skeletal muscle hypertrophy in human adults in response to resistance training (RT has largely focused on endogenous endocrine responses. However, the endocrine response to RT as having an obligatory role in muscle hypertrophy has come under scrutiny, as other mechanisms and pathways seem to also be involved in up-regulating muscle protein synthesis (MPS. Skeletal muscle myogenesis is a multifactorial process of tissue growth and repair in response to resistance training is regulated by many factors.  As a result, satellite cell-fused myogenesis is a possible factor in skeletal muscle regeneration and hypertrophy in response to RT.  The Wnt family ligands interact with various receptors and activate different downstream signaling pathways and have been classified as either canonical (β-catenin dependent or non-canonical (β-catenin independent.  Wnt is secreted from numerous tissues in a paracrine fashion. The Wnt/β-catenin signaling pathway is a highly-regulated and intricate pathway that is essential to skeletal muscle myogenesis.  The canonical Wnt/β-catenin pathway may influence satellite cells to myogenic commitment, differentiation, and fusion into muscle fibers in response to injury or trauma, self-renewal, and normal basal turnover.  The current literature has shown that, in response mechanical overload from acute resistance exercise and chronic resistance training, that the Wnt/β-catenin signaling pathway is stimulated which may actuate the process of muscle repair and hypertrophy in response to exercise-induced muscle damage. The purpose of this review is to elaborate on the Wnt/β-catenin signaling  pathway, the current literature investigating the relationship of the Wnt/β-catenin pathway and its effects on myogenesis is response to muscle damage and resistance exercise and training.      Keywords: skeletal muscle, hypertrophy, myogenesis, cell signaling, protein synthesis, resistance

  20. Resistance to systemic inflammation and multi organ damage after global ischemia/reperfusion in the arctic ground squirrel.

    Directory of Open Access Journals (Sweden)

    Lori K Bogren

    Full Text Available Cardiac arrest (CA and hemorrhagic shock (HS are two clinically relevant situations where the body undergoes global ischemia as blood pressure drops below the threshold necessary for adequate organ perfusion. Resistance to ischemia/reperfusion (I/R injury is a characteristic of hibernating mammals. The present study sought to determine if arctic ground squirrels (AGS are protected from systemic inflammation and multi organ damage after CA- or HS-induced global I/R and if, for HS, this protection is dependent upon their hibernation season.For CA, rats and summer euthermic AGS (AGS-EU were asphyxiated for 8 min, inducing CA. For HS, rats, AGS-EU, and winter interbout arousal AGS (AGS-IBA were subject to HS by withdrawing blood to a mean arterial pressure of 35 mmHg and maintaining that pressure for 20 min before reperfusion with Ringers. For both I/R models, body temperature (Tb was kept at 36.5-37.5°C. After reperfusion, animals were monitored for seven days (CA or 3 hrs (HS then tissues and blood were collected for histopathology, clinical chemistries, and cytokine level analysis (HS only. For the HS studies, additional groups of rats and AGS were monitored for three days after HS to access survival and physiological impairment.Rats had increased serum markers of liver damage one hour after CA while AGS did not. For HS, AGS survived 72 hours after I/R whereas rats did not survive overnight. Additionally, only rats displayed an inflammatory response after HS. AGS maintained a positive base excess, whereas the base excess in rats was negative during and after hemorrhage.Regardless of season, AGS are resistant to organ damage, systemic inflammation, and multi organ damage after systemic I/R and this resistance is not dependent on their ability to become decrease Tb during insult but may stem from an altered acid/base and metabolic response during I/R.

  1. Construction of System for Seismic Observation in Deep Borehole (SODB) - Development of Multi-depth, High-temperature/pressure resistance seismometer

    International Nuclear Information System (INIS)

    Mamada, Yutaka

    2014-01-01

    The development of a high quality system for seismic observation in deep boreholes, the installation process at the NIIT site, and the data sharing plan for this observation were explained. The key points of the development were high temperature resistance (150 degrees Celsius), high pressure resistance (30 MPa), and a high dynamic/wide frequency range seismometer which allows for observation of micro-tremor to strong motions as well as a cascade-connection-type borehole seismometer, which allows multiple probes to be set at several depths in a single borehole. The developed system consists of broadband (0.1-50 Hz) and high dynamic range (up to 1000 gal) seismometer with electronic parts on the ground and only the pendulum part in the borehole (it became a servo-type seismometer). Durability and maintenance may be issues in the future. (author)

  2. Antiretroviral therapy-induced insulin resistance and oxidative deoxy nucleic acid damage in human immunodeficiency virus-1 patients

    Directory of Open Access Journals (Sweden)

    Vaishali Kolgiri Honnapurmath

    2017-01-01

    Full Text Available Background and Objectives: Insulin resistance (IR is frequent in human immunodeficiency virus (HIV infection and may be related to antiretroviral therapy (ART. Increased oxidative stress parameters and carbonyl protein are linked to insulin sensitivity. The present study is aimed to determine IR, its association with oxidative deoxy nucleic acid (DNA damage in HIV-1-infected patients with different ART status. Materials and Methods: In this case–control study, a total 600 subjects were included. We used plasma levels of the oxidized base, 8-hydroxy-2-deoxyguanosine (8-OHdG, as our biomarker of oxidative DNA damage. 8-OHdG was measured with the highly sensitive 8-OHdG check enzyme-linked immunosorbent assay kit. IR was determined using homeostasis model assessment. Results: All subjects were randomly selected and grouped as HIV-negative (control group (n = 300, HIV-positive without ART (n = 100, HIV-positive with ART first line (n = 100, and HIV-positive with ART second line (n = 100. IR and oxidative DNA damage were significantly higher in HIV-positive patients with second-line ART and HIV-positive patients with first-line ART than ART-naive patients. In a linear regression analysis, increased IR was positively associated with the increased DNA damage (odds ratio: 3.052, 95% confidence interval: 2.595–3.509 P < 0.001. Interpretation and Conclusions: In this study, we observed that ART plays a significant role in the development of IR and oxidative DNA damage in HIV-positive patients taking ART. Awareness and knowledge of these biomarkers may prove helpful to clinicians while prescribing ART to HIV/AIDS patients. Larger studies are warranted to determine the exact role of ART in the induction of IR and DNA damage.

  3. High resolution in situ mapping of microstrain and microstructure evolution reveals damage resistance criteria in dual phase steels

    International Nuclear Information System (INIS)

    Yan, Dingshun; Tasan, Cemal Cem; Raabe, Dierk

    2015-01-01

    Microstructures of multi-phase alloys undergo morphological and crystallographic changes upon deformation, corresponding to the associated microstructural strain fields. The multiple length and time scales involved therein create immense complexity, especially when microstructural damage mechanisms are also activated. An understanding of the relationship between microstructure and damage initiation can often not be achieved by post-mortem microstructural characterization alone. Here, we present a novel multi-probe analysis approach. It couples various scanning electron microscopy methods to microscopic-digital image correlation (μ-DIC), to overcome various challenges associated with concurrent mapping of the deforming microstructure along with the associated microstrain fields. For this purpose a contrast- and resolution-optimized μ-DIC patterning method and a selective pattern/microstructure imaging strategy were developed. They jointly enable imaging of (i) microstructure-independent pattern maps and (ii) pattern-independent microstructure maps. We apply this approach here to the study of damage nucleation in ferrite/martensite dual-phase (DP) steel. The analyses provide four specific design guidelines for developing damage-resistant DP steels

  4. Resistance training-induced changes in integrated myofibrillar protein synthesis are related to hypertrophy only after attenuation of muscle damage.

    Science.gov (United States)

    Damas, Felipe; Phillips, Stuart M; Libardi, Cleiton A; Vechin, Felipe C; Lixandrão, Manoel E; Jannig, Paulo R; Costa, Luiz A R; Bacurau, Aline V; Snijders, Tim; Parise, Gianni; Tricoli, Valmor; Roschel, Hamilton; Ugrinowitsch, Carlos

    2016-09-15

    Skeletal muscle hypertrophy is one of the main outcomes from resistance training (RT), but how it is modulated throughout training is still unknown. We show that changes in myofibrillar protein synthesis (MyoPS) after an initial resistance exercise (RE) bout in the first week of RT (T1) were greater than those seen post-RE at the third (T2) and tenth week (T3) of RT, with values being similar at T2 and T3. Muscle damage (Z-band streaming) was the highest during post-RE recovery at T1, lower at T2 and minimal at T3. When muscle damage was the highest, so was the integrated MyoPS (at T1), but neither were related to hypertrophy; however, integrated MyoPS at T2 and T3 were correlated with hypertrophy. We conclude that muscle hypertrophy is the result of accumulated intermittent increases in MyoPS mainly after a progressive attenuation of muscle damage. Skeletal muscle hypertrophy is one of the main outcomes of resistance training (RT), but how hypertrophy is modulated and the mechanisms regulating it are still unknown. To investigate how muscle hypertrophy is modulated through RT, we measured day-to-day integrated myofibrillar protein synthesis (MyoPS) using deuterium oxide and assessed muscle damage at the beginning (T1), at 3 weeks (T2) and at 10 weeks of RT (T3). Ten young men (27 (1) years, mean (SEM)) had muscle biopsies (vastus lateralis) taken to measure integrated MyoPS and muscle damage (Z-band streaming and indirect parameters) before, and 24 h and 48 h post resistance exercise (post-RE) at T1, T2 and T3. Fibre cross-sectional area (fCSA) was evaluated using biopsies at T1, T2 and T3. Increases in fCSA were observed only at T3 (P = 0.017). Changes in MyoPS post-RE at T1, T2 and T3 were greater at T1 (P Muscle damage was the highest during post-RE recovery at T1, attenuated at T2 and further attenuated at T3. The change in MyoPS post-RE at both T2 and T3, but not at T1, was strongly correlated (r ≈ 0.9, P muscle hypertrophy. Initial Myo

  5. Wireless Damage Monitoring of Laminated CFRP Composites using Electrical Resistance Change

    National Research Council Canada - National Science Library

    Todoroki, Akira

    2007-01-01

    .... In this system, a tiny oscillation circuit is attached to the composite component. When delimitation of the component occurs, electrical resistance changes, which causes a change in the oscillating frequency of the circuit...

  6. Evaluation of contact resistance between carbon fiber/epoxy composite laminate and printed silver electrode for damage monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Jeon, Eun Beom; Kim, Hak Sung [Dept. of Mechanical Convergence Engineering, Hanyang University, Seoul (Korea, Republic of); Takahashi, Kosuke [Dept. of Mechanical Sciences and Engineering, Tokyo Institute of Technology, Tokyo (Korea, Republic of)

    2014-10-15

    An addressable conducting network (ACN) makes it possible to monitor the condition of a structure using the electrical resistance between electrodes on the surface of a carbon fiber reinforced plastics (CFRP) structure. To improve the damage detection reliability of the ACN, the contact resistances between the electrodes and CFRP laminates needs to be minimized. In this study, silver nanoparticle electrodes were fabricated via printed electronics techniques on a CFRP composite. The contact resistance between the silver electrodes and CFRP were measured with respect to various fabrication conditions such as the sintering temperature of the silver nano-ink and the surface roughness of the CFRP laminates. The interfaces between the silver electrode and carbon fibers were observed using a scanning electron microscope (SEM). Based on this study, it was found that the lowest contact resistance of 0.3664Ω could be achieved when the sintering temperature of the silver nano-ink and surface roughness were 120 degree C and 0.230 a, respectively.

  7. Research on Service Life of Flame Resistant Materials in the Exhibition Hall by the Use of Mechanical Method of the Meso Damage Mechanics

    OpenAIRE

    Zhang Junzhu

    2015-01-01

    The population in the exhibition hall is relatively dense, and fire incidents often occur, so the existence of flame resistant materials is very important. The flame resistant materials are used to analyze the museums, art galleries, science and technology museums and other exhibition halls. Taking two kinds of flame resistant materials, namely, Mg(OH)2 and Al(OH)3 as an example, this paper establishes a model of meso damage mechanics by the use of mechanical method of the meso damage mechani...

  8. Adaptive response in human blood lymphocytes exposed to non-ionizing radiofrequency fields: resistance to ionizing radiation-induced damage.

    Science.gov (United States)

    Sannino, Anna; Zeni, Olga; Romeo, Stefania; Massa, Rita; Gialanella, Giancarlo; Grossi, Gianfranco; Manti, Lorenzo; Vijayalaxmi; Scarfì, Maria Rosaria

    2014-03-01

    The aim of this preliminary investigation was to assess whether human peripheral blood lymphocytes which have been pre-exposed to non-ionizing radiofrequency fields exhibit an adaptive response (AR) by resisting the induction of genetic damage from subsequent exposure to ionizing radiation. Peripheral blood lymphocytes from four healthy donors were stimulated with phytohemagglutinin for 24 h and then exposed for 20 h to 1950 MHz radiofrequency fields (RF, adaptive dose, AD) at an average specific absorption rate of 0.3 W/kg. At 48 h, the cells were subjected to a challenge dose (CD) of 1.0 or 1.5 Gy X-irradiation (XR, challenge dose, CD). After a 72 h total culture period, cells were collected to examine the incidence of micronuclei (MN). There was a significant decrease in the number of MN in lymphocytes exposed to RF + XR (AD + CD) as compared with those subjected to XR alone (CD). These observations thus suggested a RF-induced AR and induction of resistance to subsequent damage from XR. There was variability between the donors in RF-induced AR. The data reported in our earlier investigations also indicated a similar induction of AR in human blood lymphocytes that had been pre-exposed to RF (AD) and subsequently treated with a chemical mutagen, mitomycin C (CD). Since XR and mitomycin-C induce different kinds of lesions in cellular DNA, further studies are required to understand the mechanism(s) involved in the RF-induced adaptive response.

  9. Concrete Materials with Ultra-High Damage Resistance and Self- Sensing Capacity for Extended Nuclear Fuel Storage Systems

    Energy Technology Data Exchange (ETDEWEB)

    Li, Mo [Univ. of California, Irvine, CA (United States); Nakshatrala, Kalyana [Univ. of Houston, TX (United States); William, Kasper [Univ. of Houston, TX (United States); Xi, Yungping [Univ. of Colorado, Boulder, CO (United States)

    2017-02-08

    The objective of this project is to develop a new class of multifunctional concrete materials (MSCs) for extended spent nuclear fuel (SNF) storage systems, which combine ultra-high damage resistance through strain-hardening behavior with distributed multi-dimensional damage self-sensing capacity. The beauty of multifunctional concrete materials is two-fold: First, it serves as a major material component for the SNF pool, dry cask shielding and foundation pad with greatly improved resistance to cracking, reinforcement corrosion, and other common deterioration mechanisms under service conditions, and prevention from fracture failure under extreme events (e.g. impact, earthquake). This will be achieved by designing multiple levels of protection mechanisms into the material (i.e., ultrahigh ductility that provides thousands of times greater fracture energy than concrete and normal fiber reinforced concrete; intrinsic cracking control, electrochemical properties modification, reduced chemical and radionuclide transport properties, and crack-healing properties). Second, it offers capacity for distributed and direct sensing of cracking, strain, and corrosion wherever the material is located. This will be achieved by establishing the changes in electrical properties due to mechanical and electrochemical stimulus. The project will combine nano-, micro- and composite technologies, computational mechanics, durability characterization, and structural health monitoring methods, to realize new MSCs for very long-term (greater than 120 years) SNF storage systems.

  10. Exercise-induced muscle damage is reduced in resistance-trained males by branched chain amino acids: a randomized, double-blind, placebo controlled study

    Directory of Open Access Journals (Sweden)

    Howatson Glyn

    2012-07-01

    Full Text Available Abstract Background It is well documented that exercise-induced muscle damage (EIMD decreases muscle function and causes soreness and discomfort. Branched-chain amino acid (BCAA supplementation has been shown to increase protein synthesis and decrease muscle protein breakdown, however, the effects of BCAAs on recovery from damaging resistance training are unclear. Therefore, the aim of this study was to examine the effects of a BCAA supplementation on markers of muscle damage elicited via a sport specific bout of damaging exercise in trained volunteers. Methods Twelve males (mean ± SD age, 23 ± 2 y; stature, 178.3 ± 3.6 cm and body mass, 79.6 ± 8.4 kg were randomly assigned to a supplement (n = 6 or placebo (n = 6 group. The damaging exercise consisted of 100 consecutive drop-jumps. Creatine kinase (CK, maximal voluntary contraction (MVC, muscle soreness (DOMS, vertical jump (VJ, thigh circumference (TC and calf circumference (CC were measured as markers of muscle damage. All variables were measured immediately before the damaging exercise and at 24, 48, 72 and 96 h post-exercise. Results A significant time effect was seen for all variables. There were significant group effects showing a reduction in CK efflux and muscle soreness in the BCAA group compared to the placebo (P Conclusion The present study has shown that BCAA administered before and following damaging resistance exercise reduces indices of muscle damage and accelerates recovery in resistance-trained males. It seems likely that BCAA provided greater bioavailablity of substrate to improve protein synthesis and thereby the extent of secondary muscle damage associated with strenuous resistance exercise. Clinical Trial Registration Number: NCT01529281.

  11. Earthquake Resilient Bridge Columns Utilizing Damage Resistant Hybrid Fiber Reinforced Concrete

    OpenAIRE

    Trono, William Dean

    2014-01-01

    Modern reinforced concrete bridges are designed to avoid collapse and to prevent loss of life during earthquakes. To meet these objectives, bridge columns are typically detailed to form ductile plastic hinges when large displacements occur. California seismic design criteria acknowledges that damage such as concrete cover spalling and reinforcing bar yielding may occur in columns during a design-level earthquake. The seismic resilience of bridge columns can be improved through the use of a da...

  12. Evaluating the Thermal Damage Resistance of Reduced Graphene Oxide/Carbon Nanotube Hybrid Coatings

    Science.gov (United States)

    David, Lamuel; Feldman, Ari; Mansfield, Elisabeth; Lehman, John; Singh, Gurpreet; National Institute of Standards and Technology Collaboration

    2014-03-01

    Carbon nanotubes and graphene are known to exhibit some exceptional thermal (K ~ 2000 to 4400 W.m-1K-1 at 300K) and optical properties. Here, we demonstrate preparation and testing of multiwalled carbon nanotubes and chemically modified graphene-composite spray coatings for use on thermal detectors for high-power lasers. The synthesized nanocomposite material was tested by preparing spray coatings on aluminum test coupons used as a representation of the thermal detector's surface. These coatings were then exposed to increasing laser powers and extended exposure times to quantify their damage threshold and optical absorbance. The graphene/carbon nanotube (prepared at varying mass% of graphene in CNTs) coatings demonstrated significantly higher damage threshold values at 2.5 kW laser power (10.6 μm wavelength) than carbon paint or MWCNTs alone. Electron microscopy and Raman spectroscopy of irradiated specimens showed that the composite coating endured high laser-power densities (up to 2 kW.cm-2) without significant visual damage. This research is based on work supported by the National Science Foundation (Chemical, Bioengineering, Environmental, and Transport Systems Division), under grant no. 1335862 to G. Singh.

  13. Improving the bulk laser-damage resistance of KDP by baking and pulsed-laser irradiation

    International Nuclear Information System (INIS)

    Swain, J.E.; Stokowski, S.E.; Milam, D.; Rainer, F.

    1981-01-01

    Isolated bulk damage centers are produced when KDP crystals are irradiated by 1-ns 1064-nm pulses. We have tested about 100 samples and find the median threshold to be 7 J/cm 2 when the samples are irradiated only once at each test volume (1-on-1 tests). The median threshold increased to 11 J/cm 2 when the test volumes were first subjected to subthreshold laser irradiation (n-on-1 tests). We baked several crystals at temperatures from 110 to 165 0 C and remeasured their thresholds. Baking increased thresholds in some crystals, but did not change thresholds of others. The median threshold of baked crystals ranged from 8 to 10 J/cm 2 depending on the baking temperature. In crystals that had been baked, subthreshold irradiation produced a large change in the bulk damage threshold, and reduced the volume density of damage centers relative to the density observed in unbaked crystals. The data are summarized in the table

  14. Reduced susceptibility to eccentric exercise-induced muscle damage in resistance-trained men is not linked to resistance training-related neural adaptations

    Directory of Open Access Journals (Sweden)

    X Ye

    2015-09-01

    Full Text Available The purpose of this study was to examine the acute effects of maximal concentric vs. eccentric exercise on the isometric strength of the elbow flexor, as well as the biceps brachii muscle electromyographic (EMG responses in resistance-trained (RT vs. untrained (UT men. Thirteen RT men (age: 24 ± 4 years; height: 180.2 ± 7.7 cm; body weight: 92.2 ± 16.9 kg and twelve UT men (age: 23 ± 4 years; height: 179.2 ± 5.0 cm; body weight: 81.5 ± 8.6 kg performed six sets of ten maximal concentric isokinetic (CON or eccentric isokinetic (ECC elbow flexion exercise in two separate visits. Before and after the exercise interventions, maximal voluntary contractions (MVCs were performed for testing isometric strength. In addition, bipolar surface EMG signals were detected from the biceps brachii muscle during the strength testing. Both CON and ECC caused isometric strength to decrease, regardless of the training status. However, ECC caused greater isometric strength decline than CON did for the UT group (p = 0.006, but not for the RT group. Both EMG amplitude and mean frequency significantly decreased and increased, respectively, regardless of the training status and exercise intervention. Resistance-trained men are less susceptible to eccentric exercise-induced muscle damage, but this advantage is not likely linked to the chronic resistance training-induced neural adaptations.

  15. Chest Press Exercises With Different Stability Requirements Result in Similar Muscle Damage Recovery in Resistance-Trained Men.

    Science.gov (United States)

    Ferreira, Diogo V; Ferreira-Júnior, João B; Soares, Saulo R S; Cadore, Eduardo L; Izquierdo, Mikel; Brown, Lee E; Bottaro, Martim

    2017-01-01

    Ferreira, DV, Ferreira-Júnior, JB, Soares, SRS, Cadore, EL, Izquierdo, M, Brown, LE, and Bottaro, M. Chest press exercises with different stability requirements result in similar muscle damage recovery in resistance trained men. J Strength Cond Res 31(1): 71-79, 2017-This study investigated the time course of 96 hours of muscle recovery after 3 different chest press exercises with different stability requirements in resistance-trained men. Twenty-seven men (23.5 ± 3.8 years) were randomly assigned to one of the 3 groups: (a) Smith machine bench press; (b) barbell bench press; or (c) dumbbell bench press. Participants performed 8 sets of 10 repetition maximum with 2 minutes rest between sets. Muscle thickness, peak torque (PT), and soreness were measured pre, post, 24, 48, 72, and 96 hours after exercise. There were no differences in the time course of PT or muscle thickness values of the pectoralis major (p = 0.98 and p = 0.91, respectively) or elbow extensors (p = 0.07 and p = 0.86, respectively) between groups. Muscle soreness of the pectoralis major was also not different between groups (p > 0.05). However, the Smith machine and barbell groups recovered from triceps brachii muscle soreness by 72 hours after exercise (p > 0.05), whereas the dumbbell group did not present any triceps brachii muscle soreness after exercise (p > 0.05). In conclusion, resistance-trained men experience similar muscle damage recovery after Smith machine, barbell, and dumbbell chest press exercise. However, muscle soreness of the elbow extensors takes a longer time to recover after using a barbell chest press exercise.

  16. Resistance to Internal Damage and Scaling of Concrete Air Entrained By Microspheres

    Science.gov (United States)

    Molendowska, Agnieszka; Wawrzenczyk, Jerzy

    2017-10-01

    This paper report the test results of high strength concrete produced with slag cement and air entrained with polymer microspheres in three diameters. The study focused on determining the effects of the microsphere size and quantity on the air void structure and resistance to internal cracking and scaling of the concrete. The resistance to internal cracking was determined in compliance with the requirements of the modified ASTM C666 A method on beam specimens. The scaling resistance in a 3% NaCl solution was determined using the slab test in accordance with PKN-CEN/TS 12390-9:2007. The air void structure parameters were determined to PN-EN 480-11:1998. The study results indicate that the use of microspheres is an effective air entrainment method providing very good air void structure parameters. The results show high freeze-thaw durability of polymer microsphere-based concrete in exposure class XF3. The scaling resistance test confirms that it is substantially more difficult to protect concrete against scaling in the presence of the 3% NaCl solution (exposure class XF4). Concrete scaling is a complex phenomenon controlled by a number of independent factors.

  17. Prostate cancer stem-like cells proliferate slowly and resist etoposide-induced cytotoxicity via enhancing DNA damage response

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Judy [Division of Nephrology, Department of Medicine, McMaster University, Juravinski Innovation Tower, Room T3310, St. Joseph' s Hospital, 50 Charlton Ave East, Hamilton, Ontario, Canada L8S 4L8 (Canada); Father Sean O' Sullivan Research Institute, Hamilton, Ontario, Canada L8N 4A6 (Canada); The Hamilton Centre for Kidney Research (HCKR), St. Joseph' s Hamilton Healthcare, Hamilton, Ontario, Canada L8N 4A6 (Canada); Tang, Damu, E-mail: damut@mcmaster.ca [Division of Nephrology, Department of Medicine, McMaster University, Juravinski Innovation Tower, Room T3310, St. Joseph' s Hospital, 50 Charlton Ave East, Hamilton, Ontario, Canada L8S 4L8 (Canada); Father Sean O' Sullivan Research Institute, Hamilton, Ontario, Canada L8N 4A6 (Canada); The Hamilton Centre for Kidney Research (HCKR), St. Joseph' s Hamilton Healthcare, Hamilton, Ontario, Canada L8N 4A6 (Canada)

    2014-10-15

    Despite the development of chemoresistance as a major concern in prostate cancer therapy, the underlying mechanisms remain elusive. In this report, we demonstrate that DU145-derived prostate cancer stem cells (PCSCs) progress slowly with more cells accumulating in the G1 phase in comparison to DU145 non-PCSCs. Consistent with the important role of the AKT pathway in promoting G1 progression, DU145 PCSCs were less sensitive to growth factor-induced activation of AKT in comparison to non-PCSCs. In response to etoposide (one of the most commonly used chemotherapeutic drugs), DU145 PCSCs survived significantly better than non-PCSCs. In addition to etoposide, PCSCs demonstrated increased resistance to docetaxel, a taxane drug that is commonly used to treat castration-resistant prostate cancer. Etoposide produced elevated levels of γH2AX and triggered a robust G2/M arrest along with a coordinated reduction of the G1 population in PCSCs compared to non-PCSCs, suggesting that elevated γH2AX plays a role in the resistance of PCSCs to etoposide-induced cytotoxicity. We have generated xenograft tumors from DU145 PCSCs and non-PCSCs. Consistent with the knowledge that PCSCs produce xenograft tumors with more advanced features, we were able to demonstrate that PCSC-derived xenograft tumors displayed higher levels of γH2AX and p-CHK1 compared to non-PCSC-produced xenograft tumors. Collectively, our research suggests that the elevation of DNA damage response contributes to PCSC-associated resistance to genotoxic reagents. - Highlights: • Increased survival in DU145 PCSCs following etoposide-induced cytotoxicity. • PCSCs exhibit increased sensitivity to etoposide-induced DDR. • Resistance to cytotoxicity may be due to slower proliferation in PCSCs. • Reduced kinetics to growth factor induced activation of AKT in PCSCs.

  18. Surface Contaminant Control Technologies to Improve Laser Damage Resistance of Optics

    Directory of Open Access Journals (Sweden)

    Xiaofeng Cheng

    2014-01-01

    Full Text Available The large high-power solid lasers, such as the National Ignition Facility (NIF of America and the Shenguang-III (SG-III laser facility of China, can output over 2.1 MJ laser pulse for the inertial confinement fusion (ICF experiments. Because of the enhancement of operating flux and the expansion of laser driver scale, the problem of contamination seriously influences their construction period and operation life. During irradiation by intense laser beams, the contaminants on the metallic surface of beam tubes can be transmitted to the optical surfaces and lead to damage of optical components. For the high-power solid-state laser facilities, contamination control focuses on the slab amplifiers, spatial filters, and final-optical assemblies. In this paper, an effective solution to control contaminations including the whole process of the laser driver is put forward to provide the safe operation of laser facilities, and the detailed technical methods of contamination control such as washing, cleanliness metrology, and cleanliness protecting are also introduced to reduce the probability of laser-induced damage of optics. The experimental results show that the cleanliness level of SG-III laser facility is much better to ensure that the laser facility can safely operate at high energy flux.

  19. Laser damage resistance of RbTiOPO(4): evidence of polarization dependent anisotropy.

    Science.gov (United States)

    Wagner, F R; Hildenbrand, A; Natoli, J Y; Commandré, M; Théodore, F; Albrecht, H

    2007-10-17

    Nanosecond-laser induced damage of RbTiOPO(4) crystals (RTP) has been studied at 1064 nm as a function of propagation direction and polarization orientation. A significant difference in the Laser Induced Damage Threshold (LIDT) was observed for x-cut and y-cut crystals in Pockels cell configuration, where the light propagation direction is along the x and y axes of the crystal respectively. In Pockels cell configuration the polarization is oriented at 45? with respect to the z-axis of the crystal. Experiments with the polarization oriented parallel to the principal axes of the crystal pointed out the importance of the polarization direction for the LIDT whereas the propagation direction did not significantly influence the LIDT. Comparison of the experimental data with a simple model reveals the influence of frequency doubling on the LIDT in Pockels cell configuration. In the case of the y-cut Pockels cell, the generation of frequency doubled light causes an LIDT below the LIDT of x and z-polarized light at the fundamental wavelength.

  20. Semiparametric profile likelihood estimation for continuous outcomes with excess zeros in a random-threshold damage-resistance model.

    Science.gov (United States)

    Rice, John D; Tsodikov, Alex

    2017-05-30

    Continuous outcome data with a proportion of observations equal to zero (often referred to as semicontinuous data) arise frequently in biomedical studies. Typical approaches involve two-part models, with one part a logistic model for the probability of observing a zero and some parametric continuous distribution for modeling the positive part of the data. We propose a semiparametric model based on a biological system with competing damage manifestation and resistance processes. This allows us to derive a closed-form profile likelihood based on the retro-hazard function, leading to a flexible procedure for modeling continuous data with a point mass at zero. A simulation study is presented to examine the properties of the method in finite samples. We apply the method to a data set consisting of pulmonary capillary hemorrhage area in lab rats subjected to diagnostic ultrasound. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

  1. The benefit of a supplement with the antioxidant melatonin on redox status and muscle damage in resistance-trained athletes.

    Science.gov (United States)

    Leonardo-Mendonça, Roberto C; Ocaña-Wilhelmi, Javier; de Haro, Tomás; de Teresa-Galván, Carlos; Guerra-Hernández, Eduardo; Rusanova, Iryna; Fernández-Ortiz, Marisol; Sayed, Ramy K A; Escames, Germaine; Acuña-Castroviejo, Darío

    2017-07-01

    Previous data showed that the administration of high doses of melatonin improved the circadian system in athletes. Here, we investigated in the same experimental paradigm whether the antioxidant properties of melatonin has also beneficial effects against exercise-induced oxidative stress and muscle damage in athletes. Twenty-four athletes were treated with 100 mg·day -1 of melatonin or placebo 30 min before bedtime during 4 weeks in a randomized double-blind scheme. Exercise intensity was higher during the study that before starting it. Blood samples were collected before and after treatment, and plasma was used for oxygen radical absorption capacity (ORAC), lipid peroxidation (LPO), nitrite plus nitrate (NOx), and advanced oxidation protein products (AOPP) determinations. Glutathione (GSH), glutathione disulphide (GSSG) levels, and glutathione peroxidase (GPx) and reductase (GRd) activities, were measured in erythrocytes. Melatonin intake increased ORAC, reduced LPO and NOx levels, and prevented the increase of AOPP, compared to placebo group. Melatonin was also more efficient than placebo in reducing GSSG·GSH -1 and GPx·GRd -1 ratios. Melatonin, but not placebo, reduced creatine kinase, lactate dehydrogenase, creatinine, and total cholesterol levels. Overall, the data reflect a beneficial effect of melatonin treatment in resistance-training athletes, preventing extra- and intracellular oxidative stress induced by exercise, and yielding further skeletal muscle protection against exercise-induced oxidative damage.

  2. USP22 Induces Cisplatin Resistance in Lung Adenocarcinoma by Regulating γH2AX-Mediated DNA Damage Repair and Ku70/Bax-Mediated Apoptosis

    Directory of Open Access Journals (Sweden)

    Aman Wang

    2017-05-01

    Full Text Available Resistance to platinum-based chemotherapy is one of the most important reasons for treatment failure in advanced non-small cell lung cancer, but the underlying mechanism is extremely complex and unclear. The present study aimed to investigate the correlation of ubiquitin-specific peptidase 22 (USP22 with acquired resistance to cisplatin in lung adenocarcinoma. In this study, we found that overexpression of USP22 could lead to cisplatin resistance in A549 cells. USP22 and its downstream proteins γH2AX and Sirt1 levels are upregulated in the cisplatin- resistant A549/CDDP cell line. USP22 enhances DNA damage repair and induce cisplatin resistance by promoting the phosphorylation of histone H2AX via deubiquitinating histone H2A. In addition, USP22 decreases the acetylation of Ku70 by stabilizing Sirt1, thus inhibiting Bax-mediated apoptosis and inducing cisplatin resistance. The cisplatin sensitivity in cisplatin-resistant A549/CDDP cells was restored by USP22 inhibition in vivo and vitro. In summary, our findings reveal the dual mechanism of USP22 involvement in cisplatin resistance that USP22 can regulate γH2AX-mediated DNA damage repair and Ku70/Bax-mediated apoptosis. USP22 is a potential target in cisplatin-resistant lung adenocarcinoma and should be considered in future therapeutic practice.

  3. Blood lipid peroxides and muscle damage increased following intensive resistance training of female weightlifters.

    Science.gov (United States)

    Liu, Jen-Fang; Chang, Wei-Yin; Chan, Kuei-Hui; Tsai, Wen-Yee; Lin, Chen-Li; Hsu, Mei-Chieh

    2005-05-01

    The aim of this study was to examine changes in muscle cell injury and antioxidant capacity of weightlifters following a 1-week intensive resistance-training regimen. Thirty-six female subjects participated in this study, and their ages ranged from 18 to 25 years. The sample group included 19 elite weightlifters with more than 3 years of weightlifting training experience, while the control group comprised 17 non-athletic individuals. Compared with non-athletes, weightlifters had significantly lower glutathione peroxidase activity and plasma vitamin C concentrations. Weightlifters also had significantly higher malondialdehyde + 4-hydroxy 2-(E)-nonenal (MDA+4-HNE) and thiobarbituric acid-reactive substance (TBARS) levels and creatine kinase (CK) activity. For weightlifters, the plasma vitamin E level and the activity of superoxide dismutase (SOD) decreased, and CK activity increased significantly (P weightlifters (P weightlifters. Furthermore, proper rest after intensive training was found to be important for recovery.

  4. Cyclobutane pyrimidine dimers photolyase from extremophilic microalga: Remarkable UVB resistance and efficient DNA damage repair

    Energy Technology Data Exchange (ETDEWEB)

    Li, Chongjie [Key Laboratory of Marine Bioactive Substance, The First Institute of Oceanography, State Oceanic Administration, Qingdao 266061 (China); Ma, Li [Key Laboratory of Biofuels, and Shandong Provincial Key Laboratory of Energy Genetics, Qingdao Institute of Bioenergy and Bioprocess Technology, Chinese Academy of Sciences, Qingdao 266101 (China); Mou, Shanli [Yellow Sea Fisheries Research Institute, Chinese Academy of Fishery Sciences, Qingdao (China); Wang, Yibin, E-mail: wangyibin@fio.org.cn [Key Laboratory of Marine Bioactive Substance, The First Institute of Oceanography, State Oceanic Administration, Qingdao 266061 (China); Zheng, Zhou; Liu, Fangming; Qi, Xiaoqing; An, Meiling; Chen, Hao [Key Laboratory of Marine Bioactive Substance, The First Institute of Oceanography, State Oceanic Administration, Qingdao 266061 (China); Miao, Jinlai, E-mail: miaojinlai@163.com [Key Laboratory of Marine Bioactive Substance, The First Institute of Oceanography, State Oceanic Administration, Qingdao 266061 (China); State Key Laboratory of Biological Fermentation Engineering of Beer (In Preparation), Qingdao (China)

    2015-03-15

    Highlights: • Chlamydomonas sp. ICE-L photolyase gene PHR2 is first cloned and expressed in E. coli. • PHR2 complemented E. coli could efficiently survival from UV radiation. • Expressed PHR2 photolyase has distinct photo-reactivation activity in vitro. - Abstract: Bacteria living in the Antarctic region have developed several adaptive features for growth and survival under extreme conditions. Chlamydomonas sp. ICE-Lis well adapted to high levels of solar UV radiation. A putative photolyase was identified in the Chlamydomonas sp. ICE-L transcriptome. The complete cDNA sequence was obtained by RACE-PCR. This PHR encoding includes a polypeptide of 579 amino acids with clear photolyase signatures belonging to class II CPD-photolyases, sharing a high degree of homology with Chlamydomonas reinhardtii (68%). Real-time PCR was performed to investigate the potential DNA damage and responses following UVB exposure. CPD photolyase mRNA expression level increased over 50-fold in response to UVB radiation for 6 h. Using photolyase complementation assay, we demonstrated that DNA photolyase increased photo-repair more than 116-fold in Escherichia coli strain SY2 under 100 μw/cm{sup 2} UVB radiation. To determine whether photolyase is active in vitro, CPD photolyase was over-expressed. It was shown that pyrimidine dimers were split by the action of PHR2. This study reports the unique structure and high activity of the enzyme. These findings are relevant for further understanding of molecular mechanisms of photo-reactivation, and will accelerate the utilization of photolyase in the medical field.

  5. The Effect of Early Frost Damage on the Penetration Resistance of Chloride Ion of NPP Concrete

    Energy Technology Data Exchange (ETDEWEB)

    Koh, Kyung Teak; Park, Chun Jin; Kim, Si Hwan; Ryu, Gum Sung [Korea Institute of Construction Technology, Goyang (Korea, Republic of)

    2012-05-15

    The specification for the nuclear power plant (NPP) structure construction specifies the conformity of the regulation ACI-306R in constructing the cold-weather concrete. According to the regulation with regard to the curing condition for cold weather concrete, the insulation curing of cold weather concrete should be appropriately performed under the environment of 5 .deg. C or more until the strength of 500 psi is developed. In addition, according to the regulations regarding the cold weather concrete in the domestic concrete specifications, the insulation curing should be performed until the strength development of 715 psi considering the safety factor indicated to the ACI regulation under the temperature of 5 .deg. C or more. According to the above-mentioned regulations, the NPP structure is required to develop the minimum strength of 715 psi or more and to maintain the important quality including strength development, early anti-freezing and duality under the cold weather condition. However, even though the early strength of 715 psi or more is secured under cold weather condition, if the structure is exposed to the continuous cold weather condition after the protection equipment including curing coat are removed, the structure's durability can go down compared to the concrete cured under the standard curing temperature condition in spring and fall, but the studies on this status still remain poor. Accordingly, this study tried to verify the adequacy of the insulation curing management standard, which is currently presented, in time of constructing the cold weather concrete, through reviewing the penetration resistance of chloride ion with considering the local characteristics of domestic NPP located at coastal areas after curing until the point of 715 psi, then exposing it to a certain cycle of freeze-thaw environment under the continuous cold weather condition

  6. Comparative effect of order based resistance exercises on number of repetitions, rating of perceived exertion and muscle damage biomarkers in men

    Directory of Open Access Journals (Sweden)

    H. Arazi

    2015-12-01

    Conclusion: It can be concluded that both of the resistance exercise orders were equally effective in muscle damage parameters (CK, lactate, RPE and the average of the total number of exercise repetitions, although when the exercise session progressed, the number of repetitions performed to volitional failure decreased in last exercise in one single order, and the exercise order can influence performance.

  7. Replicative bypass repair of ultraviolet damage to DNA of mammalian cells: caffeine sensitive and caffeine resistant mechanism

    International Nuclear Information System (INIS)

    Fujiwara, Y.; Tatsumi, M.

    1976-01-01

    Replicative bypass repair of UV damage to DNA was studied in a wide variaty of human, mouse and hamster cells in culture. Survival curve analysis revealed that in established cell lines (mouse L, Chinese hamster V79, HeLa S3 and SV40-transformed xeroderma pigmentosum (XP), post-UV caffeine treatment potentiated cell killing by reducing the extrapolation number and mean lethal UV fluence (Do). In the Do reduction as the result of random inactivation by caffeine of sensitive repair there were marked clonal differences among such cell lines, V79 being most sensitive to caffeine potentiation. However, other diploid cell lines (normal human, excision-defective XP and Syrian hamster) exhibited no obvious reduction in Do by caffeine. In parallel, alkaline sucrose sedimentation results showed that the conversion of initially smaller segments of DNA synthesized after irradiation with 10 J/m 2 to high-molecular-weight DNA was inhibited by caffeine in transformed XP cells, but not in the diploid human cell lines. Exceptionally, diploid XP variants had a retarded ability of bypass repair which was drastically prevented by caffeine, so that caffeine enhanced the lethal effect of UV. Neutral CsCl study on the bypass repair mechanism by use of bromodeoxyuridine for DNA synthesis on damaged template suggests that the pyrimodine dimer acts as a block to replication and subsequently it is circumvented presumably by a new process involving replicative bypassing following strand displacement, rather than by gap-filling de novo. This mechanism worked similarly in normal and XP cells, whether or not caffeine was present, indicating that excision of dimer is not always necessary. However, replicative bypassing became defective in XP variant and transformed XP cells when caffeine was present. It appears, therefore, that the replicative bypass repair process is either caffeine resistant or sensitive, depending on the cell type used, but not necessarily on the excision repair capability

  8. Increasing global agricultural production by reducing ozone damages via methane emission controls and ozone-resistant cultivar selection.

    Science.gov (United States)

    Avnery, Shiri; Mauzerall, Denise L; Fiore, Arlene M

    2013-04-01

    Meeting the projected 50% increase in global grain demand by 2030 without further environmental degradation poses a major challenge for agricultural production. Because surface ozone (O3 ) has a significant negative impact on crop yields, one way to increase future production is to reduce O3 -induced agricultural losses. We present two strategies whereby O3 damage to crops may be reduced. We first examine the potential benefits of an O3 mitigation strategy motivated by climate change goals: gradual emission reductions of methane (CH4 ), an important greenhouse gas and tropospheric O3 precursor that has not yet been targeted for O3 pollution abatement. Our second strategy focuses on adapting crops to O3 exposure by selecting cultivars with demonstrated O3 resistance. We find that the CH4 reductions considered would increase global production of soybean, maize, and wheat by 23-102 Mt in 2030 - the equivalent of a ~2-8% increase in year 2000 production worth $3.5-15 billion worldwide (USD2000 ), increasing the cost effectiveness of this CH4 mitigation policy. Choosing crop varieties with O3 resistance (relative to median-sensitivity cultivars) could improve global agricultural production in 2030 by over 140 Mt, the equivalent of a 12% increase in 2000 production worth ~$22 billion. Benefits are dominated by improvements for wheat in South Asia, where O3 -induced crop losses would otherwise be severe. Combining the two strategies generates benefits that are less than fully additive, given the nature of O3 effects on crops. Our results demonstrate the significant potential to sustainably improve global agricultural production by decreasing O3 -induced reductions in crop yields. © 2012 Blackwell Publishing Ltd.

  9. Intracellular and membrane-damaging activities of methyl gallate isolated from Terminalia chebula against multidrug-resistant Shigella spp.

    Science.gov (United States)

    Acharyya, Saurabh; Sarkar, Prodipta; Saha, Dhira R; Patra, Amarendra; Ramamurthy, T; Bag, Prasanta K

    2015-08-01

    Shigella spp. (Shigella dysenteriae, Shigella flexneri, Shigella boydii and Shigella sonnei) cause bacillary dysentery (shigellosis), which is characterized by bloody mucous diarrhoea. Although a variety of antibiotics have been effective for treatment of shigellosis, options are becoming limited due to globally emerging drug resistance. In the present study, in vitro antibacterial activity of methyl gallate (MG) isolated from Terminalia chebula was determined by performing MIC, minimal bactericidal concentration (MBC) and time-kill kinetic studies. Bacterial membrane-damaging activity of MG was determined by membrane perturbation and transmission electron microscopy (TEM). Cellular drug accumulation, cell infection and assessment of intracellular activities of MG and reference antibiotics were performed using HeLa cell cultures. The bactericidal activity of MG against multidrug-resistant (MDR) Shigella spp. in comparison with other commonly used drugs including fluoroquinolone was demonstrated here. TEM findings in the present study revealed that MG caused the total disintegration of inner and outer membranes, and leakage of the cytoplasmic contents of S. dysenteriae. The level of accumulation of MG and tetracycline in HeLa cells incubated for 24  h was relatively higher than that of ciprofloxacin and nalidixic acid (ratio of intracellular concentration/extracellular concentration of antibiotic for MG and tetracycline>ciprofloxacin and nalidixic acid). The viable number of intracellular S. dysenteriae was decreased in a time-dependent manner in the presence of MG (4 × MBC) and reduced to zero within 20  h. The significant intracellular activities of MG suggested that it could potentially be used as an effective antibacterial agent for the treatment of severe infections caused by MDR Shigella spp.

  10. Rules of Thumb for Depth of Investigation, Pseudo-Position and Resolution of the Electrical Resistivity Method from Analysis of the Moments of the Sensitivity Function for a Homogeneous Half-Space

    Science.gov (United States)

    Butler, S. L.

    2017-12-01

    The electrical resistivity method is now highly developed with 2D and even 3D surveys routinely performed and with available fast inversion software. However, rules of thumb, based on simple mathematical formulas, for important quantities like depth of investigation, horizontal position and resolution have not previously been available and would be useful for survey planning, preliminary interpretation and general education about the method. In this contribution, I will show that the sensitivity function for the resistivity method for a homogeneous half-space can be analyzed in terms of its first and second moments which yield simple mathematical formulas. The first moment gives the sensitivity-weighted center of an apparent resistivity measurement with the vertical center being an estimate of the depth of investigation. I will show that this depth of investigation estimate works at least as well as previous estimates based on the peak and median of the depth sensitivity function which must be calculated numerically for a general four electrode array. The vertical and horizontal first moments can also be used as pseudopositions when plotting 1, 2 and 3D pseudosections. The appropriate horizontal plotting point for a pseudosection was not previously obvious for nonsymmetric arrays. The second moments of the sensitivity function give estimates of the spatial extent of the region contributing to an apparent resistivity measurement and hence are measures of the resolution. These also have simple mathematical formulas.

  11. UV Differentially Induces Oxidative Stress, DNA Damage and Apoptosis in BCR-ABL1-Positive Cells Sensitive and Resistant to Imatinib

    Science.gov (United States)

    Synowiec, Ewelina; Hoser, Grazyna; Wojcik, Katarzyna; Pawlowska, Elzbieta; Skorski, Tomasz; Błasiak, Janusz

    2015-01-01

    Chronic myeloid leukemia (CML) cells express the active BCR-ABL1 protein, which has been targeted by imatinib in CML therapy, but resistance to this drug is an emerging problem. BCR-ABL1 induces endogenous oxidative stress promoting genomic instability and imatinib resistance. In the present work, we investigated the extent of oxidative stress, DNA damage, apoptosis and expression of apoptosis-related genes in BCR-ABL1 cells sensitive and resistant to imatinib. The resistance resulted either from the Y253H mutation in the BCR-ABL1 gene or incubation in increasing concentrations of imatinib (AR). UV irradiation at a dose rate of 0.12 J/(m2·s) induced more DNA damage detected by the T4 pyrimidine dimers glycosylase and hOGG1, recognizing oxidative modifications to DNA bases in imatinib-resistant than -sensitive cells. The resistant cells displayed also higher susceptibility to UV-induced apoptosis. These cells had lower native mitochondrial membrane potential than imatinib-sensitive cells, but UV-irradiation reversed that relationship. We observed a significant lowering of the expression of the succinate dehydrogenase (SDHB) gene, encoding a component of the complex II of the mitochondrial respiratory chain, which is involved in apoptosis sensing. Although detailed mechanism of imatinib resistance in AR cells in unknown, we detected the presence of the Y253H mutation in a fraction of these cells. In conclusion, imatinib-resistant cells may display a different extent of genome instability than their imatinib-sensitive counterparts, which may follow their different reactions to both endogenous and exogenous DNA-damaging factors, including DNA repair and apoptosis. PMID:26251899

  12. Influence of standing-wave electric field pattern on the laser damage resistance of HfO sub 2 thin films

    CERN Document Server

    Protopapa, M L; De Tomasi, F; Di Giulio, M; Perrone, M R; Scaglione, S

    2002-01-01

    The standing-wave electric field pattern that forms inside an optical coating as a consequence of laser irradiation is one of the factors influencing the coating laser-induced damage threshold. The influence of the standing-wave electric field profile on the damage resistance to ultraviolet radiation of hafnium dioxide (HfO sub 2) thin films was investigated in this work. To this end, HfO sub 2 thin films of different thicknesses deposited by the electron beam evaporation technique at the same deposition conditions were analyzed. Laser damage thresholds of the samples were measured at 308 nm (XeCl laser) by the photoacoustic beam deflection technique and microscopic inspections. The dependence of the laser damage threshold on the standing-wave electric field pattern was analyzed.

  13. Resistance to DNA Damaging Agents Produced Invasive Phenotype of Rat Glioma Cells—Characterization of a New in Vivo Model

    Directory of Open Access Journals (Sweden)

    Sonja Stojković

    2016-06-01

    Full Text Available Chemoresistance and invasion properties are severe limitations to efficient glioma therapy. Therefore, development of glioma in vivo models that more accurately resemble the situation observed in patients emerges. Previously, we established RC6 rat glioma cell line resistant to DNA damaging agents including antiglioma approved therapies such as 3-bis(2-chloroethyl-1-nitrosourea (BCNU and temozolomide (TMZ. Herein, we evaluated the invasiveness of RC6 cells in vitro and in a new orthotopic animal model. For comparison, we used C6 cells from which RC6 cells originated. Differences in cell growth properties were assessed by real-time cell analyzer. Cells’ invasive potential in vitro was studied in fluorescently labeled gelatin and by formation of multicellular spheroids in hydrogel. For animal studies, fluorescently labeled cells were inoculated into adult male Wistar rat brains. Consecutive coronal and sagittal brain sections were analyzed 10 and 25 days post-inoculation, while rats’ behavior was recorded during three days in the open field test starting from 25th day post-inoculation. We demonstrated that development of chemoresistance induced invasive phenotype of RC6 cells with significant behavioral impediments implying usefulness of orthotopic RC6 glioma allograft in preclinical studies for the examination of new approaches to counteract both chemoresistance and invasion of glioma cells.

  14. Combination of alcohol and fructose exacerbates metabolic imbalance in terms of hepatic damage, dyslipidemia, and insulin resistance in rats.

    Directory of Open Access Journals (Sweden)

    Salamah Mohammad Alwahsh

    dyslipidemia and insulin resistance-accompanied liver damage.

  15. Combination of alcohol and fructose exacerbates metabolic imbalance in terms of hepatic damage, dyslipidemia, and insulin resistance in rats.

    Science.gov (United States)

    Alwahsh, Salamah Mohammad; Xu, Min; Schultze, Frank Christian; Wilting, Jörg; Mihm, Sabine; Raddatz, Dirk; Ramadori, Giuliano

    2014-01-01

    Although both alcohol and fructose are particularly steatogenic, their long-term effect in the development of a metabolic syndrome has not been studied in vivo. Consumption of fructose generally leads to obesity, whereas ethanol can induce liver damage in the absence of overweight. Here, Sprague-Dawley rats were fed ad libitum for 28 days on five diets: chow (control), liquid Lieber-DeCarli (LDC) diet, LDC +30%J of ethanol (L-Et) or fructose (L-Fr), and LDC combined with 30%J ethanol and 30%J fructose (L-EF). Body weight (BW) and liver weight (LW) were measured. Blood and liver samples were harvested and subjected to biochemical tests, histopathological examinations, and RT-PCR. Alcohol-containing diets substantially reduced the food intake and BW (≤3rd week), whereas fructose-fed animals had higher LW than controls (Pcholesterol levels (also vs. the L-Et group). The albumin and Quick-test levels were the lowest, whereas ALT activity was the highest in the L-EF group. Moreover, the L-EF diet aggravated plasma triglyceride and reduced HDL-cholesterol levels more than 2.7-fold compared to the sum of the effects of the L-Et and L-Fr diets. The decreased hepatic insulin clearance in the L-EF group vs. control and LDC groups was reflected by a significantly decreased C-peptide:insulin ratio. All diets except the control caused hepatosteatosis, as evidenced by Nile red and H&E staining. Hepatic transcription of insulin receptor substrate-1/2 was mainly suppressed by the L-Fr and L-EF diets. The L-EF diet did not enhance the mitochondrial β-oxidation of fatty acids (Cpt1α and Ppar-α expressions) compared to the L-Et or L-Fr diet. Together, our data provide evidence for the coaction of ethanol and fructose with a high-fat-diet on dyslipidemia and insulin resistance-accompanied liver damage.

  16. Experimental study of EUV mirror radiation damage resistance under long-term free-electron laser exposures below the single-shot damage threshold

    Czech Academy of Sciences Publication Activity Database

    Makhotkin, I.; Sobierajski, R.; Chalupský, Jaromír; Tiedtke, K.; de Vries, G.; Stoermer, M.; Scholze, F.; Siewert, F.; van de Kruijs, R.W.E.; Milov, I.; Louis, E.; Jacyna, I.; Jurek, M.; Klinger, D.; Nittler, L.; Syryanyy, Y.; Juha, Libor; Hájková, Věra; Vozda, Vojtěch; Burian, Tomáš; Saksl, Karel; Faatz, B.; Keitel, B.; Ploenjes, E.; Schreiber, S.; Toleikis, S.; Loch, R.A.; Hermann, M.; Strobel, S.; Nienhuys, H.-K.; Gwalt, G.; Mey, T.; Enkisch, H.

    2018-01-01

    Roč. 25, č. 1 (2018), s. 77-84 ISSN 1600-5775. [Workshop on FEL Photon Diagnostics, Instrumentation and Beamline Design (PhotonDiag2017). Stanford, 01.05.2017-03.05.2017] R&D Projects: GA MŠk LG15013; GA ČR(CZ) GA17-05167s; GA ČR(CZ) GA14-29772S Institutional support: RVO:68378271 Keywords : free-electron laser induced damage * EUV optics * thin films * FELs Subject RIV: BL - Plasma and Gas Discharge Physics OBOR OECD: Fluids and plasma physics (including surface physics) Impact factor: 3.011, year: 2016

  17. Research on Service Life of Flame Resistant Materials in the Exhibition Hall by the Use of Mechanical Method of the Meso Damage Mechanics

    Directory of Open Access Journals (Sweden)

    Zhang Junzhu

    2015-01-01

    Full Text Available The population in the exhibition hall is relatively dense, and fire incidents often occur, so the existence of flame resistant materials is very important. The flame resistant materials are used to analyze the museums, art galleries, science and technology museums and other exhibition halls. Taking two kinds of flame resistant materials, namely, Mg(OH2 and Al(OH3 as an example, this paper establishes a model of meso damage mechanics by the use of mechanical method of the meso damage mechanics, and researches the macro mechanical properties of the thermal insulation materials and decorative materials so as to predict its service life. This research finds that the use of two kinds of flame resistant materials, namely, Mg(OH2 and Al(OH3 can improve the elasticity modulus of the thermal insulation materials and decorative materials used in the construction, so that its macro mechanical properties can have a significant improvement, and its service life can also have a significant improvement after adding flame retardant materials.

  18. Comparison of Earthquake Damage Patterns and Shallow-Depth Vs Structure Across the Napa Valley, Inferred From Multichannel Analysis of Surface Waves (MASW) and Multichannel Analysis of Love Waves (MALW) Modeling of Basin-Wide Seismic Profiles

    Science.gov (United States)

    Chan, J. H.; Catchings, R.; Strayer, L. M.; Goldman, M.; Criley, C.; Sickler, R. R.; Boatwright, J.

    2017-12-01

    We conducted an active-source seismic investigation across the Napa Valley (Napa Valley Seismic Investigation-16) in September of 2016 consisting of two basin-wide seismic profiles; one profile was 20 km long and N-S-trending (338°), and the other 15 km long and E-W-trending (80°) (see Catchings et al., 2017). Data from the NVSI-16 seismic investigation were recorded using a total of 666 vertical- and horizontal-component seismographs, spaced 100 m apart on both seismic profiles. Seismic sources were generated by a total of 36 buried explosions spaced 1 km apart. The two seismic profiles intersected in downtown Napa, where a large number of buildings were red-tagged by the City following the 24 August 2014 Mw 6.0 South Napa earthquake. From the recorded Rayleigh and Love waves, we developed 2-Dimensional S-wave velocity models to depths of about 0.5 km using the multichannel analysis of surface waves (MASW) method. Our MASW (Rayleigh) and MALW (Love) models show two prominent low-velocity (Vs = 350 to 1300 m/s) sub-basins that were also previously identified from gravity studies (Langenheim et al., 2010). These basins trend N-W and also coincide with the locations of more than 1500 red- and yellow-tagged buildings within the City of Napa that were tagged after the 2014 South Napa earthquake. The observed correlation between low-Vs, deep basins, and the red-and yellow-tagged buildings in Napa suggests similar large-scale seismic investigations can be performed. These correlations provide insights into the likely locations of significant structural damage resulting from future earthquakes that occur adjacent to or within sedimentary basins.

  19. CO/sub 2/-laser polishing of fused silica surfaces for increased laser damage resistance at 1. 06. mu. m

    Energy Technology Data Exchange (ETDEWEB)

    Temple, P.A.; Milam, D.; Lowdermilk, W.H.

    1980-04-03

    Bare fused silica surfaces were prepared by subjecting the mechanically polished surface to a rastered cw CO/sub 2/ laser beam. Analysis shows that this processing causes: (a) removal of a uniform layer of fused silica; and (b) a probable re-fusing or healing of existing subsurface fractures. The fused silica removal rate is found to be a function of the laser intensity and scan rate. These surfaces are seen to have very low scatter and to be very smooth. In addition, they have exhibited entrance surface damage thresholds at 1.06 ..mu..m, and 1 nsec, which are substantially above those seen on the mechanically polished surface. When damage does occur, it tends to be at a few isolated points rather than the general uniform damage seen on the mechanicaly polished part. In addition to the damage results, we will discuss an observational technique used for viewing these surfaces which employs dark-field illumination.

  20. Seismic resistance of equipment and building service systems: review of earthquake damage design requirements, and research applications in the USA

    International Nuclear Information System (INIS)

    Skjei, R.E.; Chakravartula, B.C.; Yanev, P.I.

    1979-01-01

    The history of earthquake damage and the resulting code design requirements for earthquake hazard mitigation for equipment in the USA is reviewed. Earthquake damage to essential service systems is summarized; observations for the 1964 Alaska and the 1971 San Fernando, California, earthquakes are stressed, and information from other events is included. USA building codes that reflect lessons learned from these earthquakes are discussed; brief summaries of widely used codes are presented. In conclusion there is a discussion of the desirability of adapting advanced technological concepts from the nuclear industry to equipment in conventional structures. (author)

  1. Winter damage of frost semi-resistant half-cultured apple-trees varieties in sounthern predbaikal’ye

    Directory of Open Access Journals (Sweden)

    Rachenko M.A.

    2013-08-01

    Full Text Available The study was focused on the varieties of macrocarpous semi-culture apple-trees, which are promising for growing in Southern Predbaikal’ye. Most of varieties studied were shown to be characterized by low winter-resistance in the case of low trunk grafting. Tree skeleton grafting demonstrated an increase of winter-resistance of macrocarpous semi-culture apple-trees.

  2. Chitosan-Dextran sulfate coated doxorubicin loaded PLGA-PVA-nanoparticles caused apoptosis in doxorubicin resistance breast cancer cells through induction of DNA damage.

    Science.gov (United States)

    Siddharth, Sumit; Nayak, Anmada; Nayak, Deepika; Bindhani, Birendra Kumar; Kundu, Chanakya Nath

    2017-05-19

    To overcome the toxicity, pharmacokinetics and drug resistance associated with doxorubicin (DOX), a strategy was developed by encapsulating DOX- loaded-PLGA-PVA- nanoparticles within chitosan-dextran sulfate nanoparticles (CS-DS) [CS-DS-coated-DOX-loaded -PLGA-PVA-NP] and study the sensitivity against DOX- resistance- breast cancer cells (MCF-7-DOX-R). These CS-DS and PLGA-PVA double coated DOX are spherical, stable, polydispersed and have zeta potential +2.89 mV. MCF-7- DOX-R cells were derived by exposing increasing doses of DOX in MCF-7 cells. These cells were resistance to 500 nM of DOX while parental cells were susceptible at 150 nM. The double coated NP caused more cytotoxicity in cancer and MCF-7-DOX-R cells without affecting the normal cells in comparison to DOX-loaded-PLGA-PVA-NP. These NP enhances the uptake of DOX in MCF-7-DOX-R cells and caused apoptosis by increasing apoptotic nuclei, Bax/Bcl-xL ratio, cleaved product PARP-1, tumor suppressor gene p21, p53, topoisomerase inhibition activity, DNA damage and decreasing the migratory potential of cells. An increased S phase arrest was noted in DOX and DOX- loaded- PLGA-PVA-NP treated cells but reduction of S phase and simultaneous increase of Sub-G1 was observed in double coated-NP. Thus, data revealed that CS-DS- DOX- loaded PLGA-PVA- NP caused DOX-resistance cell death by inducing inhibition of topoisomerase activity followed by DNA damage.

  3. Depth profiles of resistivity and spectral IP for active modern submarine hydrothermal deposits: a case study from the Iheya North Knoll and the Iheya Minor Ridge in Okinawa Trough, Japan

    Science.gov (United States)

    Komori, Shogo; Masaki, Yuka; Tanikawa, Wataru; Torimoto, Junji; Ohta, Yusuke; Makio, Masato; Maeda, Lena; Ishibashi, Jun-ichiro; Nozaki, Tatsuo; Tadai, Osamu; Kumagai, Hidenori

    2017-08-01

    Submarine hydrothermal deposits are one of the promising seafloor mineral resources, because they can store a large amount of metallic minerals as sulfides. The present study focuses on the electrical properties of active modern submarine hydrothermal deposits, in order to provide constraints on the interpretation of electrical structures obtained from marine electromagnetic surveys. Measurements of resistivity and spectral induced polarization (IP) were made using drillcore samples taken from the Iheya North Knoll and the Iheya Minor Ridge in Okinawa Trough, Japan. These hydrothermal sediments are dominantly composed of disseminated sulfides, with minor amounts of massive sulfide rocks. The depth profiles of resistivity and spectral IP properties were successfully revealed to correspond well to layer-by-layer lithological features. Comparison with other physical properties and occurrence of constituent minerals showed that resistivity is essentially sensitive to the connectivity of interstitial fluids, rather than by sulfide and clay content. This suggests that, in active modern submarine hydrothermal systems, not only typical massive sulfide rocks but also high-temperature hydrothermal fluids could be imaged as low-resistivity anomalies in seabed surveys. The spectral IP signature was shown to be sensitive to the presence or absence of sulfide minerals, and total chargeability is positively correlated with sulfide mineral abundance. In addition, the massive sulfide rock exhibits the distinctive IP feature that the phase steadily increases with a decrease of frequency. These results show the effective usage of IP for developing and improving marine IP exploration techniques.[Figure not available: see fulltext.

  4. Changes in volatile terpene and diterpene resin acid composition of resistant and susceptible white spruce leaders exposed to simulated white pine weevil damage.

    Science.gov (United States)

    Tomlin, E S; Antonejevic, E; Alfaro, R I; Borden, J H

    2000-10-01

    Induced (traumatic) resin in white spruce (Picea glauca (Moench) Voss) leaders resistant or susceptible to the white pine weevil (Pissodes strobi Peck) was analyzed for volatile terpenes and diterpene resin acids after simulated white pine weevil damage. Leaders from 331 trees were wounded just below the apical bud with a 1-mm diameter drill, coinciding with the natural time of weevil oviposition in the spring. Leaders were removed in the fall, and the bark and xylem from the upper and lower regions of the leader extracted and analyzed by gas chromatography. Unwounded trees had low amounts of resin in xylem compared with bark. In response to wounding, volatile terpenes and diterpene resin acids increased in the upper xylem (area of wounding), with resistant trees showing a greater increase than susceptible trees. Wounding caused monoterpenes in particular to decrease in the lower region of the leader (away from the drilled area) in greater amounts in susceptible trees than in resistant trees. In response to wounding, the proportion of monoterpene to resin acid increased in the upper and lower xylem of resistant trees, and slightly increased in the upper xylem of susceptible trees. Monoterpene-enriched resin is more fluid than constitutive resin, and probably flows more readily into oviposition cavities and larval mines, where it may kill immature weevils. Loss of resin components in the lower xylem suggested catabolism and transport of these materials to the site of wounding; however, energetic and regulatory data are necessary to confirm this hypothesis. This study provides a basis for measuring the ability of a tree to undergo traumatic resinosis that could be used to screen for resistance to white pine weevil.

  5. Monitoring the Excavation Damaged Zone in Opalinus clay by three dimensional reconstruction of the electrical resistivity in the Mont Terri gallery G-04

    Science.gov (United States)

    Lesparre, N.; Adler, A.; Nicollin, F.; Gibert, D.; Nussbaum, C.

    2012-04-01

    The characteristics of opalinus clay have been studied in the last years for its capacity to retain radionuclide transport as a low permeable rock. This formation presents thereby suitable properties for hosting repository sites of radioactive waste. The Mont Terri underground rock laboratory (Switzerland) has been excavated in opalinus clay layer in order to develop experiences improving the knowledge on the physico-chemical properties of the rock. The study of electrical properties furnishes information on the rock structure, its anisotropy and the changes of these properties with time (Nicollin et al., 2010 ; Thovert et al., 2011). Here the three dimensional reconstruction of the electrical resistivity aims at monitoring the temporal evolution of the excavation damaged zone. Three rings of electrodes have been set-up around the gallery and voltage is measured between two electrodes while a current is injected between two others (Gibert et al., 2006). Measurements have been achieved from July 2004 until April 2008 before, during and after the excavation of the gallery 04. In this study we develop a computational approach to reconstruct three dimensional images of the resistivity in the vicinity of the electrodes. A finite element model is used to represent the complex geometry of the gallery. The measurements inferred from a given resistivity distribution are estimated using the software EIDORS (Adler and Lionheart, 2006), this constitutes the forward problem. The reconstruction of the media resistivity is then implemented by fitting the estimated to the measured data, via the resolution of an inverse problem. The parameters of this inverse problem are defined by mapping the forward problem elements into a coarser mesh. This allows to reduce drastically the number of unknowns and so increases the robustness of the inversion. The inversion is executed with the conjugate gradient method regularised by an analysis of the Jacobian singular values. The results show an

  6. Huaiqihuang may protect from proteinuria by resisting MPC5 podocyte damage via targeting p-ERK/CHOP pathway

    Directory of Open Access Journals (Sweden)

    Tingxia Li

    2016-08-01

    Full Text Available The purpose of this study was to investigate the potential effects of Huaiqihuang (HQH granule, a Chinese herbal medicine, in treating proteinuria and to reveal its possible mechanism. MPC5 podocytes were cultured in vitro at 37°C and induced with tunicamycin (TM. The TM-induced cells were treated with HQH at different concentrations. The cell proliferation was detected using the MTT assay. The optimal effective dose of HQH for MPC5 cells was determined by the MTT assay and LDH assay respectively. The influences of HQH on the proteinuria-related protein expression and the signaling pathway associated protein expression were also detected using quantitative reverse transcription PCR and Western blotting analysis. The results showed that the MPC5 cell model was successfully constructed in vitro. The HQH application could improve the harmful effects induced by TM on the MPC5 cells, including promoted cell proliferation and suppressed cell apoptosis. Furthermore, the protein expression, including podocin, nephrin, and synaptopodin was down-regulated by the TM treatment in the MPC5 cells. On contrary, the expression of these proteins was up-regulated after the HQH application. Also, the effect of TM on integrin α3 and integrin β1 expressions was also reversed by the HQH treatment. Moreover, the HQH application decreased the expression of p-ERK and DNA-damage-inducible transcript 3 (DDIT3 or CHOP in the MPC5 cells, which was opposite to the effect observed in the cells treated with TM. Taken together, our study suggest that HQH application may protect podocytes from TM damage by suppressing the p-ERK/CHOP signaling pathway.

  7. Analysis of the effect of implemented low temperature overpressure regimes on the reactor pressure vessel resistance to damage

    International Nuclear Information System (INIS)

    Pistora, V.

    1995-12-01

    The temperature and stress fields of the Dukovany WWER-440 reactor pressure vessel (RPV) were calculated based on a two-dimensional model using the finite element method. Two pressurized thermal shock events occurred at Dukovany in 1992: the temperature in 3 loops dropped rapidly while the primary circuit was fully pressurized. The calculation revealed that the first event was intolerable with respect to the RPV resistance to brittle fracture; had the two events occurred towards the end of the RPV lifetime, both would have been intolerable. (M.D.). 6 tabs., 15 figs., 6 refs

  8. The Effects of Adding Whey Protein and Branched-chain Amino Acid to Carbohydrate Beverages on Indices of Muscle Damage after Eccentric Resistance Exercise in Untrained Young Males

    Directory of Open Access Journals (Sweden)

    Foad Asjodi

    2017-07-01

    Full Text Available Abstract Background: The aim of this study was to evaluate the effects of supplementation of Branched-Chain Amino Acids (BCAAs plus carbohydrate (CHO and whey protein plus CHO on muscle damage indices after eccentric resistant exercise. Materials and Methods: Twenty four untrained healthy males participated in this study. They were randomly divided into three groups, BCAA +glucose (0.1+0.1g/kg supplement group (n=8, Whey+glucose (0.1+0.1g/kg supplement group (n=8, and placebo (malto dextrin 0.2g/kg group (n=8. Each subject consumed a carbohydrate beverage with addition of whey protein or branched-chain amino acid or placebo 30 minutes before exercise in a randomized,double-blind fashion. Serum levels of Creatine Kinase (CK, Lactate dehydrogenase (LDH, and muscle pain were measured before, 24, 48, 72 h after exercise. Follow-up analyses included 1-way repeated measures ANOVAs, and Bonferroni post hoc comparisons. Results: 24 h after test, serum levels of CK, LDH and muscle pain in both supplement groups were increased less than placebo group (0.015, 0.001 and 0.001, respectively. Also, the levels of CK and LDH showed significant changes in both intervention groups compared to placebo group at 24 h (0.001, 0. 015, respectively. Similarly, significant differences in the levels of CK and LDH between groups were observed. Conclusion: These data indicate that muscle damage and pain after resistant exercise were reduced by an ingestion of either BCAA drink or whey protein drink.

  9. AE characterisation of damage in burn resistant β-Titanium alloy (Tl-25V-15CR-2AL-0.2C)

    International Nuclear Information System (INIS)

    Shukri Mohd; Bowen, P.

    2003-01-01

    Acoustic Emission (AE) has been used to monitor cleavage cracking in Beta Titanium alloys to gain a detailed understanding of damage mechanisms in such alloys. Damage has been characterised in situ by AE and fractography for fracture toughness and fatigue crack growth resistance tests. During fracture toughness testing, the formation of cleavage facets in as received and heat treated specimens has been monitored by using AE. The values of fracture toughness have also been compared. For as received specimens, loads were applied until fracture while for heat treated specimens, three different test sequences were employed. For the first test, the load was again applied until failure. This test was carried out to give the overall clip gauge displacement curve for this specimen and also to estimate the load at which 5% offset and any pop-in occurs. For the second test, the load was applied to the specimens and then stopped at the 5 % offset and for the last test the applied-load was removed just after pop-in. Both of these latter specimens were then post fatigued until failure and then the fractured surfaces of all specimens were analysed using SEM. For fatigue crack growth resistance tests, the tests were started at ΔK of 20 MPam 1/2 until failure. A test was also stopped at ΔK of 40 MPam 1/2 . During such tests, crack growth was monitored by measuring the potential drop across the crack. It is found that the AE technique allows the investigation of the onset of cleavage fracture in this Beta-Ti alloy. It is, in principle, possible to use this technique to monitor online the formation of such unstable cleavage cracking of this alloy. (Author)

  10. Future trends in the treatment of methicillin-resistant Staphylococcus aureus (MRSA) infection: An in-depth review of newer antibiotics active against an enduring pathogen.

    Science.gov (United States)

    Bal, A M; David, M Z; Garau, J; Gottlieb, T; Mazzei, T; Scaglione, F; Tattevin, P; Gould, I M

    2017-09-01

    Methicillin-resistant Staphylococcus aureus (MRSA) continues to be a major public health problem. Vancomycin and teicoplanin have been in clinical use for several decades but their drawbacks are well described. In the last 10 years, several antibiotics have been made available for clinical use. Daptomycin and linezolid have been extensively used during this period. Other agents such as ceftaroline, ceftobiprole, dalbavancin, oritavancin, tedizolid and telavancin have been approved by regulatory agencies since 2009. Many others, such as the newer tetracyclines, fluoroquinolones, oxazolidinones and pleuromutilins, are in various stages of development. In addition, an ongoing multicentre trial is investigating the role of combination of vancomycin or daptomycin with β-lactam antibiotics. This review discusses the role of the newer antibiotics, reflecting the views of the 6th MRSA Consensus Conference meeting of the International Society of Chemotherapy MRSA Working Group that took place in 2016. Copyright © 2017 International Society for Chemotherapy of Infection and Cancer. Published by Elsevier Ltd. All rights reserved.

  11. Measuring Radiation Damage from Heavy Energetic Ions in Aluminum

    Energy Technology Data Exchange (ETDEWEB)

    Kostin, M., PI-MSU; Ronningen, R., PI-MSU; Ahle, L., PI-LLNL; Gabriel, T., Scientific Investigation and Development; Mansur, L., PI-ORNL; Leonard, K., ORNL; Mokhov, N., FNAL; Niita, K., RIST, Japan

    2009-02-21

    An intense beam of 122 MeV/u (9.3 GeV) 76Ge ions was stopped in aluminum samples at the Coupled Cyclotron Facility at NSCL, MSU. Attempts were made at ORNL to measure changes in material properties by measuring changes in electrical resistivity and microhardness, and by transmission electron microscopy characterization, for defect density caused by radiation damage, as a function of depth and integrated ion flux. These measurements are relevant for estimating damage to components at a rare isotope beam facility.

  12. Quantitative analysis from limited sampling: influence of the chemical composition of apatites on their resistance to irradiation damage

    International Nuclear Information System (INIS)

    Ribet, I.; Petit, J.C.; CEA Cadarache, 13 - Saint-Paul-lez-Durance

    1998-01-01

    Apatites are investigated as possible high performance radioactive waste matrices for specific actinides. In this paper, we have quantified the influence of the chemical composition of apatites on their fission-track annealing behaviour. We aimed to evaluate the capability of apatites to self-anneal high densities of radiation damages produced during disposal. The thermal annealing kinetics, at 280 deg. C, of induced fission tracks has been determined for six different apatite compositions. We show that the chemical composition of apatites is a critical parameter with respect to their annealing behaviour. A mathematical treatment of the data, based upon the methodology of optimum design of experiments, allowed the quantification of the role of substitution for two major elements, of the apatite structure (Ca, P), for chlorine and for the two groups of minor elements, actinides (U+Th) and lanthanides (La+Ce+Y), which are relevant in the nuclear waste disposal context. A high actinide content enhances the annealing of fission-tracks in apatites, which is a very favourable feature of these minerals as radioactive waste matrices. This work also points to a new strategy for the best use of information provided by geological samples. In particular, the mathematical methodology proposed here allows, first, to evaluate the 'quality' of the information obtained and, second, to improve it by a proper choice of additional samples to investigate. (authors)

  13. Multiple and variable NHEJ-like genes are involved in resistance to DNA damage in Streptomyces ambofaciens

    Directory of Open Access Journals (Sweden)

    Grégory Hoff

    2016-11-01

    Full Text Available Non homologous end-joining (NHEJ is a double strand break (DSB repair pathway which does not require any homologous template and can ligate two DNA ends together. The basic bacterial NHEJ machinery involves two partners: the Ku protein, a DNA end binding protein for DSB recognition and the multifunctional LigD protein composed a ligase, a nuclease and a polymerase domain, for end processing and ligation of the broken ends. In silico analyses performed in the 38 sequenced genomes of Streptomyces species revealed the existence of a large panel of NHEJ-like genes. Indeed, ku genes or ligD domain homologues are scattered throughout the genome in multiple copies and can be distinguished in two categories: the core NHEJ gene set constituted of conserved loci and the variable NHEJ gene set constituted of NHEJ-like genes present in only a part of the species. In Streptomyces ambofaciens ATCC 23877, not only the deletion of core genes but also that of variable genes led to an increased sensitivity to DNA damage induced by electron beam irradiation. Multiple mutants of ku, ligase or polymerase encoding genes showed an aggravated phenotype compared to single mutants. Biochemical assays revealed the ability of Ku-like proteins to protect and to stimulate ligation of DNA ends. RT-qPCR and GFP fusion experiments suggested that ku-like genes show a growth phase dependent expression profile consistent with their involvement in DNA repair during spores formation and/or germination.

  14. Effectiveness of two conventional methods for seismic retrofit of steel and RC moment resisting frames based on damage control criteria

    Science.gov (United States)

    Beheshti Aval, Seyed Bahram; Kouhestani, Hamed Sadegh; Mottaghi, Lida

    2017-07-01

    This study investigates the efficiency of two types of rehabilitation methods based on economic justification that can lead to logical decision making between the retrofitting schemes. Among various rehabilitation methods, concentric chevron bracing (CCB) and cylindrical friction damper (CFD) were selected. The performance assessment procedure of the frames is divided into two distinct phases. First, the limit state probabilities of the structures before and after rehabilitation are investigated. In the second phase, the seismic risk of structures in terms of life safety and financial losses (decision variables) using the recently published FEMA P58 methodology is evaluated. The results show that the proposed retrofitting methods improve the serviceability and life safety performance levels of steel and RC structures at different rates when subjected to earthquake loads. Moreover, these procedures reveal that financial losses are greatly decreased, and were more tangible by the application of CFD rather than using CCB. Although using both retrofitting methods reduced damage state probabilities, incorporation of a site-specific seismic hazard curve to evaluate mean annual occurrence frequency at the collapse prevention limit state caused unexpected results to be obtained. Contrary to CFD, the collapse probability of the structures retrofitted with CCB increased when compared with the primary structures.

  15. Sustained activation of DNA damage response in irradiated apoptosis-resistant cells induces reversible senescence associated with mTOR downregulation and expression of stem cell markers.

    Science.gov (United States)

    Chitikova, Zhanna V; Gordeev, Serguei A; Bykova, Tatiana V; Zubova, Svetlana G; Pospelov, Valery A; Pospelova, Tatiana V

    2014-01-01

    Cells respond to genotoxic stress by activating the DNA damage response (DDR). When injury is severe or irreparable, cells induce apoptosis or cellular senescence to prevent transmission of the lesions to the daughter cells upon cell division. Resistance to apoptosis is a hallmark of cancer that challenges the efficacy of cancer therapy. In this work, the effects of ionizing radiation on apoptosis-resistant E1A + E1B transformed cells were investigated to ascertain whether the activation of cellular senescence could provide an alternative tumor suppressor mechanism. We show that irradiated cells arrest cell cycle at G 2/M phase and resume DNA replication in the absence of cell division followed by formation of giant polyploid cells. Permanent activation of DDR signaling due to impaired DNA repair results in the induction of cellular senescence in E1A + E1B cells. However, irradiated cells bypass senescence and restore the population by dividing cells, which have near normal size and ploidy and do not express senescence markers. Reversion of senescence and appearance of proliferating cells were associated with downregulation of mTOR, activation of autophagy, mitigation of DDR signaling, and expression of stem cell markers.

  16. [Over-expression of uracil DNA glycosylase 2 (UNG2) enhances the resistance to oxidative damage in HepG2 cells].

    Science.gov (United States)

    Cao, Liyan; Cheng, Shan; Du, Juan; Guo, Yanhai; Huang, Xiaofeng

    2017-04-01

    Objective To investigate the uracil glycosidic enzyme activity of uracil DNA glycosylase 2 (UNG2) and study the role of UNG2 in the resistance of antioxidant stress of HepG2 cells. Methods The UNG2-expressing vector was built. Western blotting was used to detect the expression of UNG2. Immunofluorescence staining was performed to observe the cellular location of UNG2. Oligonucleotide was used as substrate for the determination of the UNG2 glycosidic enzyme activity. H 2 O 2 toxicity assay was done to study the function of UNG2 in the antioxidant resistance of hepatocellular carcinoma HepG2 cells. Results UNG2 was successfully over-expressed in HEK293FT cells, and UNG2 was found to be mainly located in nucleus. Enzyme activity assay showed that UNG2 had significant oligonucleotide dU glycosidic enzyme activity. H 2 O 2 toxicity assay showed that over-expressed UNG2 could remarkably increase the survival of HepG2 cells after exposed to H 2 O 2 . Conclusion UNG2 possesses specific DNA glycosidic enzyme activity, and it can protect HepG2 cells against oxidative stress damage.

  17. Soultz bets on depth energy

    International Nuclear Information System (INIS)

    Khalatbari, A.

    2010-01-01

    This article presents the geothermal power plant built 50 kilometres from Strasbourg and which will produce 1.5 MW. It describes the geological context which gave the idea of this drilling. This site gave amazing results with a very high temperature increase with respect with depth: at 1.5 km deep, water already flows at 140 C. It recalls the development of technical solutions, some seismic experiments which have been performed near Bale for the same kind of project and given up because of the important damages they provoked

  18. Acanthamoeba (T4) trophozoites cross the MDCK epithelium without cell damage but increase paracellular permeability and transepithelial resistance by modifying tight junction composition.

    Science.gov (United States)

    Flores-Maldonado, Catalina; González-Robles, Arturo; Salazar-Villatoro, Lizbeth; Omaña-Molina, Maritza; Gallardo, Juan Manuel; González-Lázaro, Mónica; Hernández-Ramírez, Verónica Ivonne; Talamás-Rohana, Patricia; Lorenzo-Morales, Jacob; Martínez-Palomo, Adolfo

    2017-12-01

    Free-living amoebae of the genus Acanthamoeba are protozoa ubiquitously found in nature. Some species of the genus are potentially pathogenic for humans provoking keratitis in healthy individuals, often in contact lens wearers and opportunistic infections such as pneumonitis, fatal granulomatous encephalitis and skin infections, particularly in immunocompromised individuals. The pathogenic mechanisms of these amoebae are poorly understood, however it had been suggested that contact dependent mechanisms are important during invasion, regardless of the epithelia type, since amoebae penetrate epithelia separating tight junction (TJ). This study was undertaken to determine whether Acanthamoeba sp. (T4) damages the barrier function of the TJ in MDCK epithelial monolayers. Actin cytoskeleton staining and electron microscopy analyses were performed; paracellular permeability and TJ sealing were evaluated by apicobasolateral diffusion of ruthenium red and transepithelial resistance (TER) measurements; immunofluorescence and Western blot assays were performed to locate and estimate expression of TJ protein claudins 2 (Cldn2) and 4 (Cldn4). The results show that Acanthamoeba sp. crosses the MDCK monolayer without altering the actin cytoskeleton or the morphology of the cells. When trophozoites or conditioned medium interact with the monolayer, paracellular diffusion of ruthenium red increases. After 6 h, the amoebae, but not their conditioned medium, increase the TER, and Cldn2 is removed from the TJ, and its overall content in the cells diminishes, while Cldn4 is targeted to the TJ without changing its expression level. In conclusion Acanthamoeba (T4) crosses MDCK monolayer without damaging the cells, increasing permeability and TER through Cldn2 degradation, and redirecting Cldn4 to TJ. These results strongly suggest that contact-dependent mechanisms are relevant during amoebae invasion. Copyright © 2017 Elsevier Inc. All rights reserved.

  19. Orientation and the extent of exfoliation of clay on scratch damage in polyamide 6 nanocomposites

    International Nuclear Information System (INIS)

    Dasari, Aravind; Yu Zhongzhen; Mai Yiuwing; Kim, Jang-Kyo

    2008-01-01

    The major objectives of this work are to understand the effects of organoclay, its extent of exfoliation and orientation, and indenter geometry on the scratch characteristics of polyamide 6/organoclay nanocomposites. Two different organically treated clays are used for this purpose and their structural parameters in a polyamide 6 matrix quantified. It is shown that, while the material properties are important for scratching resistance, they are not the only determinants of the scratch performance of materials. Further, despite proving beneficial to scratch resistance, in terms of residual depth, the presence (and exfoliation) of organoclay promotes the formation of brittle cracks during scratching. But with no organoclay layers, plastic flow controls the scratch damage in neat polyamide 6 with large residual depths. Factors such as orientation of clay layers and variations of indenter tip geometry also exert dominant effects on scratch penetration resistance and damage. Additionally, significant plastic flow and rotation of organoclay layers from the original configuration are observed underneath the sliding indenter

  20. Multi-Dimensional Damage Detection for Surfaces and Structures

    Science.gov (United States)

    Williams, Martha; Lewis, Mark; Roberson, Luke; Medelius, Pedro; Gibson, Tracy; Parks, Steen; Snyder, Sarah

    2013-01-01

    Current designs for inflatable or semi-rigidized structures for habitats and space applications use a multiple-layer construction, alternating thin layers with thicker, stronger layers, which produces a layered composite structure that is much better at resisting damage. Even though such composite structures or layered systems are robust, they can still be susceptible to penetration damage. The ability to detect damage to surfaces of inflatable or semi-rigid habitat structures is of great interest to NASA. Damage caused by impacts of foreign objects such as micrometeorites can rupture the shell of these structures, causing loss of critical hardware and/or the life of the crew. While not all impacts will have a catastrophic result, it will be very important to identify and locate areas of the exterior shell that have been damaged by impacts so that repairs (or other provisions) can be made to reduce the probability of shell wall rupture. This disclosure describes a system that will provide real-time data regarding the health of the inflatable shell or rigidized structures, and information related to the location and depth of impact damage. The innovation described here is a method of determining the size, location, and direction of damage in a multilayered structure. In the multi-dimensional damage detection system, layers of two-dimensional thin film detection layers are used to form a layered composite, with non-detection layers separating the detection layers. The non-detection layers may be either thicker or thinner than the detection layers. The thin-film damage detection layers are thin films of materials with a conductive grid or striped pattern. The conductive pattern may be applied by several methods, including printing, plating, sputtering, photolithography, and etching, and can include as many detection layers that are necessary for the structure construction or to afford the detection detail level required. The damage is detected using a detector or

  1. Huang-Lian-Jie-Du-Tang Protects Rats from Cardiac Damages Induced by Metabolic Disorder by Improving Inflammation-Mediated Insulin Resistance

    Science.gov (United States)

    Li, Chuan Bao; Li, Xiao Xing; Chen, Yu Guo; Gao, Hai Qing; Bu, Pei Li; Zhang, Yun; Ji, Xiao Ping

    2013-01-01

    Huang-lian-jie-du-tang (HLJDT), a traditional Chinese medicine, has been shown to improve insulin resistance (IR) induced by inflammation, a key event in the development of metabolic syndrome (MS). The present study aimed to investigate the protective effects of HLJDT on MS and explore the underlying mechanism. MS rats were established with obese-diets and treated with normal saline, aspirin or HLJDT. The myocardial lesions were identified by echocardiogram, transmission electron microscope, and Sirius-red staining. The inflammatory cytokines were measured by ELISA and real-time PCR. The activation of NF-κB, JNK, SOCS3, IRS1 and AKT in the heart was detected by immunohistochemistry and Western blot analysis. Compared with the controls, MS rats developed obvious obesity, hypertension, dyslipidemia, IR, inflammation, and cardiac damage. Moreover, phosphorylated IRS-1 at Ser307 was correlated with the activation of NF-κB, JNK and SOCS3 and the inhibition of AKT in the heart from MS rats. These data suggest that serine phosphorylation of IRS-1 in response to inflammation is mediated, in part, by NF-κB, JNK and SOCS3. Notably, HLJDT inhibited the activation of NF-κB and reduced serine phosphorylation of IRS-1. In summary, HLJDT protects myocardium from IR-mediated injury by inhibiting serine phosphorylation of IRS-1 in MS rats. PMID:23840732

  2. Damage to the plasmalemma, chloroplasts and photosystem II after water shortage and high-temperature stress in two lines of maize which differ in endogenous levels of abscisic acid and drought resistance

    Energy Technology Data Exchange (ETDEWEB)

    Ristic, Z.; Cass, D.D. (Univ. of Alberta, Edmonton (Canada))

    1991-05-01

    This study examines damage to the plasmalemma, chloroplasts and photosystem II (PS II), and the rate of CO{sub 2} fixation after exposure to 7-d water shortage followed by 6-h (WTS-6) or 24-h (WTS-24) high temperature (45C) stress in the high-level. Abscisic acid (ABA) drought-resistant (DR) line of maize ZPBL 1304 and the low-level ABA drought-sensitive line ZPL 389. Seven-day water shortage followed by 6-h high-temperature stress slightly damaged PS II in the DR line ZPBL 1304. The DS line ZPL 389 was affected by WTS-6 to a great extent; however, the stress-caused damage to this line was reversible. Exposure to WTS-24 caused reversible damage to the plasmalemma, chloroplasts and PS II in DR line. The DS line was not capable of withstanding severe stress conditions; WTS-24 killed almost all the plants. The results on the rate of CO{sub 2} fixation were in agreement with those on the damage to the plasmalemma, chloroplasts and PS II. Considerable drought and heat resistance was apparent in the line (ZPBL 1304) which synthesizes a unique band of heat-shock protein(s) of 45 KDa. In conclusion, the high-level ABA DR line ZPBL 1304 showed much greater capability of withstanding WTS than the low-level ABA DS line ZPL 389.

  3. Study of radiation damage induced by 12 keV X-rays in MOS structures built on high-resistivity n-type silicon.

    Science.gov (United States)

    Zhang, Jiaguo; Pintilie, Ioana; Fretwurst, Eckhart; Klanner, Robert; Perrey, Hanno; Schwandt, Joern

    2012-05-01

    Imaging experiments at the European X-ray Free Electron Laser (XFEL) require silicon pixel sensors with extraordinary performance specifications: doses of up to 1 GGy of 12 keV photons, up to 10(5) 12 keV photons per 200 µm × 200 µm pixel arriving within less than 100 fs, and a time interval between XFEL pulses of 220 ns. To address these challenges, in particular the question of radiation damage, the properties of the SiO(2) layer and of the Si-SiO(2) interface, using MOS (metal-oxide-semiconductor) capacitors manufactured on high-resistivity n-type silicon irradiated to X-ray doses between 10 kGy and 1 GGy, have been studied. Measurements of capacitance/conductance-voltage (C/G-V) at different frequencies, as well as of thermal dielectric relaxation current (TDRC), have been performed. The data can be described by a dose-dependent oxide charge density and three dominant radiation-induced interface states with Gaussian-like energy distributions in the silicon band gap. It is found that the densities of the fixed oxide charges and of the three interface states increase up to dose values of approximately 10 MGy and then saturate or even decrease. The shapes and the frequency dependences of the C/G-V measurements can be quantitatively described by a simple model using the parameters extracted from the TDRC measurements.

  4. Linezolid dampens neutrophil-mediated inflammation in methicillin-resistant Staphylococcus aureus-induced pneumonia and protects the lung of associated damages.

    Science.gov (United States)

    Jacqueline, Cédric; Broquet, Alexis; Roquilly, Antoine; Davieau, Marion; Caillon, Jocelyne; Altare, Frédéric; Potel, Gilles; Asehnoune, Karim

    2014-09-01

    Linezolid is considered as a therapeutic alternative to the use of glycopeptides for the treatment of pneumonia caused by methicillin-resistant Staphylococcus aureus (MRSA). Clinical studies reported a potent survival advantage conferred by the oxazolidinone and called into question the use of glycopeptides as first-line therapy. In a mouse model of MRSA-induced pneumonia, quantitative bacteriology, proinflammatory cytokine concentrations in lung, myeloperoxidase activity, Ly6G immunohistochemistry, and endothelial permeability were assessed to compare therapeutic efficacy and immunomodulative properties of linezolid and vancomycin administered subcutaneously every 12 hours. Significant antibacterial activity was achieved after 48 hours of treatment for linezolid and vancomycin. Levels of interleukin 1β, a major proinflammatory cytokine, and macrophage inflammatory protein 2, a chemokine involved in the recruitment of neutrophils, were decreased by both antimicrobials. Only linezolid was able to dramatically reduce the production of tumor necrosis factor α. Analysis of myeloperoxidase activity and Ly6G immunostaining showed a dramatic decrease of neutrophil infiltration in infected lung tissues for linezolid-treated animals. A time-dependent increase of endothelial permeability was observed for the control and vancomycin regimens. Of interest, in the linezolid group, decreased endothelial permeability was detected 48 hours after infection. Our results indicate that linezolid could be superior to vancomycin for the management of MRSA pneumonia by attenuating an excessive inflammatory reaction and protecting the lung from pathogen-associated damages. © The Author 2014. Published by Oxford University Press on behalf of the Infectious Diseases Society of America. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  5. Hydrogen damage in stainless steel

    International Nuclear Information System (INIS)

    Caskey, G.R. Jr.

    1981-01-01

    Hydrogen damage has been studied in a wide variety of stainless steels. Both internal and external hydrogen damage were evaluated by ductility or J-integral under rising tensile loads and by fractography. Analysis of the data has emphasized the potential effects of strain-induced martensite on hydrogen damage. Strain-induced martensite was neither necessary nor sufficient for hydrogen damage in the alloys studied. Neither ductility loss nor fracture-mode change correlated generally with martensite formation. Alloy composition, particularly nickel and nitrogen contents, was the primary factor in resistance to hydrogen damage. Thermomechanical processing, however, could alter the degree of hydrogen damage in an alloy and was critical for optimizing resistance to hydrogen damage. 10 figures, 10 tables

  6. Motivation with Depth.

    Science.gov (United States)

    DiSpezio, Michael A.

    2000-01-01

    Presents an illusional arena by offering experience in optical illusions in which students must apply critical analysis to their innate information gathering systems. Introduces different types of depth illusions for students to experience. (ASK)

  7. Discourses for Social Justice Education: The Web of Racism and the Web of Resistance

    Science.gov (United States)

    Rozas, Lisa Werkmeister; Miller, Joshua

    2009-01-01

    This article presents two conceptual frames to help with teaching about issues of race and racism. First the concept of the web of racism describes a matrix that helps students understand the depth of damage racism has instilled in contemporary U.S. society. Second, the web of resistance offers a model of anti-racist activities to help students…

  8. Production depths increasing

    Energy Technology Data Exchange (ETDEWEB)

    Dufond, R.

    1984-05-01

    Much research and development has been concentrated on the feasibility, testing and economics of oil production systems in 1000-2000 ft of water, with a possible extrapolation to 3000 ft. The deepest water production facilities are those of Shell Oil's Cognac platform in the Gulf of Mexico, at a depth of 1050 ft of water. The record drilling depth is 6448 ft off New Jersey, but several French firms are preparing equipment and procedures for drilling a well in 10,000 ft of water in the Mediterranean Sea.

  9. Creep damage in welds of X 20 CrMoV 12 1 steel. Part 2 - Studies of long term service exposed material and damage data base and calculation of damage distribution and damage resistance; Krypskador i svetsar av X 20 CrMoV 12 1 staal. Etapp 2 - Studier av lingtidspiverkat material och skadedatabas samt berakning av skadefordelning och skadetilighet

    Energy Technology Data Exchange (ETDEWEB)

    Storesund, Jan; Borggreen, Kjeld; Weilin Zang; Nilsson, Henrik; Samuelson, Aake

    2004-09-01

    The present project has been consisted of the following pieces of work on welds of X20 CrMoV 12 1: Analysis of, by use of replica testing, creep damage development in 368 welds in 11 Danish high pressure steam lines with operation up to 200,000 h. Metallographic investigations of four welds from a retired live steam line with approximately 182 000 h in operation. - Evaluation of the influence of the two most common etching methods on the interpretation of creep cavitation. Analysis of the time security of the material, i.e. influence of enhanced temperature or stress on creep life time. Finite element simulations of the creep behaviour of X20 welds where effects of HAZ creep properties, system stresses and degree of multiaxiality in the rupture criterion are studied. In addition a literature study on publications of creep life time in X20 steel was performed in a first, already reported part of the project. The results of the comprehensive replica testing and the metallographic investigations show clear-cut that welds of this material have an excellently long creep life that indeed will reach 200,000 h. The creep damage at that time is in general very limited. The typical creep life for welds of X20 can be evaluated to at least 250,000 h. The reason for that it is not possible to evaluate an even longer creep life is the fact that creep testing and finite element simulations show that creep elongation and creep damage will accelerate considerably later in the creep life than some low alloy steels. In the worst case this acceleration could start already just after 200,000 h. It is also demonstrated that welds of the X20 steel can stand system stresses much better than low alloy steels. Recommendations for how and when inspections and testing of welds of the current material should be performed have been issued. They have been adapted to the findings in the project. The recommendations can, as long as severe damage is absent, allow for longer inspection intervals

  10. Modeled Daily Thaw Depth and Frozen Ground Depth, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set contains modeled daily thaw depth and freezing depth for the Arctic terrestrial drainage basin. Thaw and freezing depths were calculated over the study...

  11. Why bother about depth?

    DEFF Research Database (Denmark)

    Stæhr, Peter A.; Obrador, Biel; Christensen, Jesper Philip

    We present results from a newly developed method to determine depth specific rates of GPP, NEP and R using frequent automated profiles of DO and temperature. Metabolic rate calculations were made for three lakes of different trophic status using a diel DO methodology that integrates rates across...

  12. Defining depth of anesthesia.

    Science.gov (United States)

    Shafer, S L; Stanski, D R

    2008-01-01

    In this chapter, drawn largely from the synthesis of material that we first presented in the sixth edition of Miller's Anesthesia, Chap 31 (Stanski and Shafer 2005; used by permission of the publisher), we have defined anesthetic depth as the probability of non-response to stimulation, calibrated against the strength of the stimulus, the difficulty of suppressing the response, and the drug-induced probability of non-responsiveness at defined effect site concentrations. This definition requires measurement of multiple different stimuli and responses at well-defined drug concentrations. There is no one stimulus and response measurement that will capture depth of anesthesia in a clinically or scientifically meaningful manner. The "clinical art" of anesthesia requires calibration of these observations of stimuli and responses (verbal responses, movement, tachycardia) against the dose and concentration of anesthetic drugs used to reduce the probability of response, constantly adjusting the administered dose to achieve the desired anesthetic depth. In our definition of "depth of anesthesia" we define the need for two components to create the anesthetic state: hypnosis created with drugs such as propofol or the inhalational anesthetics and analgesia created with the opioids or nitrous oxide. We demonstrate the scientific evidence that profound degrees of hypnosis in the absence of analgesia will not prevent the hemodynamic responses to profoundly noxious stimuli. Also, profound degrees of analgesia do not guarantee unconsciousness. However, the combination of hypnosis and analgesia suppresses hemodynamic response to noxious stimuli and guarantees unconsciousness.

  13. Alfalfa seedlings grown outdoors are more resistant to UV-induced DNA damage than plants grown in a UV-free environmental chamber

    International Nuclear Information System (INIS)

    Takayanagi, Shinnosuke; Trunk, J.G.; Sutherland, J.C.; Sutherland, B.M.

    1994-01-01

    The relative UV sensitivities of alfalfa seedlings grown outdoors versus plants grown in a growth chamber under UV-filtered cool white fluorescent bulbs have been determined using three criteria: (1) level of endogenous DNA damage as sites for the UV endonuclease from Micrococcus luteus, (2) susceptibility to pyrimidine dimer induction by a UV challenge exposure and (3) ability to repair UV-induced damage. We find that outdoor-grown plants contain approximately equal frequencies of endogenous DNA damages, are less susceptible to dimer induction by a challenge exposure of broad-spectrum UV and photorepair dimers more rapidly than plants grown in an environmental chamber under cool white fluorescent lamps plus a filter removes most UV radiation. These data suggest that plants grown in a natural environment would be less sensitive to UVB-induced damage than would be predicted on the basis of studies on plants grown under minimum UV. (author)

  14. Periodontal tissue damage in smokers

    Directory of Open Access Journals (Sweden)

    Hutojo Djajakusuma

    2006-09-01

    Full Text Available Dental plaque is the primary etiological factor in periodontal diseases. However, there are many factors that can modify how an individual periodontal tissue will respond to the accumulation of dental plaque. Among such risk factors, there is increasing evidence that smoking tobacco products alters the expression and rate of progression of periodontal diseases. The aim of this study was to find out the loss of periodontal tissue adhesion in smokers by measuring pocket depth using probe, and by measuring alveolar bone damage using Bone Loss Score (BLS radiographic methods on teeth 12, 11, 21, 22, 32, 31, 41, 42. Based on T Test statistical analysis, there were significant differences in pocket depth damage of alveolar bone in smokers and non smokers. In conclusion there were increasing pocket depth and alveolar bone damage in smokers.

  15. Elaboration of a concept for modelling creep damage and rupture processes in structural components made of heat-resistant CrMoV steels, considering multi-axial stress regimes and formation of pores. Final report

    International Nuclear Information System (INIS)

    Gaudig, W.

    1997-01-01

    The research project was intended to study and elaborate models describing the creep performance of heat-resistant CrMoV steels over the entire creep regime, including the damage processes (tertiary creep). The mathematical description of the creep performance and damages induced is required for the calculation of deformation, stresses and damage affecting structural components over their service life, so that information can be derived about their remanent life. The objective was achieved by describing the interaction between deformation and damage due to cavitation. A model was elaborated that uses an anisotropic cavitation parameter (tensor). The model was tested with and adapted to the material X 20 CrMoV 12 1 and its behaviour at 550 C using data obtained through uni-axial creep tests at constant loading. The modified model was used for recalculation of a long-term experiment at MPA Stuttgart, performed at 550 C with a pipe elbow made of the charge-identical material X 20 XrMoV 12 1, applying the ABAQUS FE program. Mechanical total strains calculated for selected nodes are in good agreement with corresponding measured data. (orig./CB) [de

  16. Manifest of depth sociopsychology

    OpenAIRE

    ZELITCHENKO ALEXANDER

    2013-01-01

    The observations of motives of activity of big groups (nations, confessions etc.) as a whole result in discovery of the part of unconscious mind that is common for all members of big group a collective unconscious. Two parts of collective unconscious may be determined: the collective superconscious known first as a group archetype and the collective subconscious, which manifest itself for example in phenomenon of collective trauma. Depth sociopsychology is a science about the collective uncon...

  17. Oxidative stress and DNA damage induced by cadmium in the human keratinocyte HaCaT cell line: Role of glutathione in the resistance to cadmium

    International Nuclear Information System (INIS)

    Nzengue, Yves; Steiman, Regine; Garrel, Catherine; Lefebvre, Emmanuel; Guiraud, Pascale

    2008-01-01

    Cadmium affects the cellular homeostasis and generates damage via complex mechanisms involving interactions with other metals and oxidative stress induction. In this work we used a human keratinocyte cell line (HaCaT) as a model to study the oxidative damage induced by cadmium to cellular macromolecules, its effect on the antioxidant systems and the role of glutathione in cell protection toward cadmium toxicity. The cells were incubated for 24 and 48 h with cadmium (3, 15, 50 and 100 μM). High doses of cadmium were required to induce a cytotoxicity: 100 μM lead to 30% mortality after 24 h and 50% after 48 h. The oxidation of lipids and proteins and the DNA damage, respectively, assessed by thiobarbituric acid reactants determination, thiol group measurement and comet assay, were observed for 50-100 μM cadmium. The cytotoxic effects were strongly correlated to the cellular cadmium content. The glutathione peroxidase and the catalase activities were decreased, while the glutathione reductase activity and the glutathione concentration were increased after cadmium treatment. The superoxide dismutases activities were unchanged. A depletion in glutathione prior to cadmium exposure increased the cytotoxic effects and provoked DNA damage. Our results suggested that the hydroxyl radical could be the major compound involved in the oxidative stress generated by cadmium and that glutathione could play a major role in the protection of HaCaT cells from cytotoxicity but mostly from DNA damage induced by cadmium

  18. BDS thin film damage competition

    Energy Technology Data Exchange (ETDEWEB)

    Stolz, C J; Thomas, M D; Griffin, A J

    2008-10-24

    A laser damage competition was held at the 2008 Boulder Damage Symposium in order to determine the current status of thin film laser resistance within the private, academic, and government sectors. This damage competition allows a direct comparison of the current state-of-the-art of high laser resistance coatings since they are all tested using the same damage test setup and the same protocol. A normal incidence high reflector multilayer coating was selected at a wavelength of 1064 nm. The substrates were provided by the submitters. A double blind test assured sample and submitter anonymity so only a summary of the results are presented here. In addition to the laser resistance results, details of deposition processes, coating materials, and layer count will also be shared.

  19. Typhoon damage on a shallow mesophotic reef in Okinawa, Japan

    Directory of Open Access Journals (Sweden)

    Kristine N. White

    2013-09-01

    Full Text Available Little is known about effects of large storm systems on mesophotic reefs. This study reports on how Typhoon 17 (Jelawat affected Ryugu Reef on Okinawa-jima, Japan in September 2012. Benthic communities were surveyed before and after the typhoon using line intercept transect method. Comparison of the benthic assemblages showed highly significant differences in coral coverage at depths of 25–32 m before and after Typhoon 17. A large deep stand of Pachyseris foliosa was apparently less resistant to the storm than the shallower high diversity area of this reef. Contradictory to common perception, this research shows that large foliose corals at deeper depths are just as susceptible to typhoon damage as shallower branching corals. However, descriptive functional group analyses resulted in only minor changes after the disturbance, suggesting the high likelihood of recovery and the high resilience capacity of this mesophotic reef.

  20. Typhoon damage on a shallow mesophotic reef in Okinawa, Japan.

    Science.gov (United States)

    White, Kristine N; Ohara, Taku; Fujii, Takuma; Kawamura, Iori; Mizuyama, Masaru; Montenegro, Javier; Shikiba, Haruka; Naruse, Tohru; McClelland, Ty; Denis, Vianney; Reimer, James D

    2013-01-01

    Little is known about effects of large storm systems on mesophotic reefs. This study reports on how Typhoon 17 (Jelawat) affected Ryugu Reef on Okinawa-jima, Japan in September 2012. Benthic communities were surveyed before and after the typhoon using line intercept transect method. Comparison of the benthic assemblages showed highly significant differences in coral coverage at depths of 25-32 m before and after Typhoon 17. A large deep stand of Pachyseris foliosa was apparently less resistant to the storm than the shallower high diversity area of this reef. Contradictory to common perception, this research shows that large foliose corals at deeper depths are just as susceptible to typhoon damage as shallower branching corals. However, descriptive functional group analyses resulted in only minor changes after the disturbance, suggesting the high likelihood of recovery and the high resilience capacity of this mesophotic reef.

  1. Radiation damage of uranium

    International Nuclear Information System (INIS)

    Lazarevic, Dj.

    1966-11-01

    Study of radiation damage covered the following: Kinetics of electric resistance of uranium and uranium alloy with 1% of molybdenum dependent on the second phase and burnup rate; Study of gas precipitation and diffusion of bubbles by transmission electron microscopy; Numerical analysis of the influence of defects distribution and concentration on the rare gas precipitation in uranium; study of thermal sedimentation of uranium alloy with molybdenum; diffusion of rare gas in metal by gas chromatography method

  2. Sensor and control for consistent seed drill coulter depth

    DEFF Research Database (Denmark)

    Kirkegaard Nielsen, Søren; Nørremark, Michael; Green, Ole

    The even placement of seeds at the correct depth is crucial for achieving the optimum yield. The depth of drill coulters on state-of-the-art seeding machines is normally set manually by downforce springs or weights will therefore react to different soil resistances. A prototype seeder with one...

  3. Sensor and control for consistent seed drill coulter depth

    DEFF Research Database (Denmark)

    Kirkegaard Nielsen, Søren; Nørremark, Michael; Green, Ole

    2016-01-01

    The consistent depth placement of seeds is vital for achieving the optimum yield of agricultural crops. In state-of-the-art seeding machines, the depth of drill coulters will vary with changes in soil resistance. This paper presents the retrofitting of an angle sensor to the pivoting point...

  4. The Role of Mitochondrial DNA Damage and Repair in the Resistance of BCR/ABL-Expressing Cells to Tyrosine Kinase Inhibitors

    Directory of Open Access Journals (Sweden)

    Janusz Blasiak

    2013-08-01

    Full Text Available Chronic myeloid leukemia (CML is a hematological malignancy that arises from the transformation of stem hematopoietic cells by the fusion oncogene BCR/ABL and subsequent clonal expansion of BCR/ABL-positive progenitor leukemic cells. The BCR/ABL protein displays a constitutively increased tyrosine kinase activity that alters many regulatory pathways, leading to uncontrolled growth, impaired differentiation and increased resistance to apoptosis featured by leukemic cells. Current CML therapy is based on tyrosine kinase inhibitors (TKIs, primarily imatinib, which induce apoptosis in leukemic cells. However, some patients show primary resistance to TKIs while others develop it in the course of therapy. In both cases, resistance may be underlined by perturbations in apoptotic signaling in leukemic cells. As mitochondria may play an important role in such signaling, alteration in mitochondrial metabolism may change resistance to pro-apoptotic action of TKIs in BCR/ABL-positive cells. Because BCR/ABL may induce reactive oxygen species and unfaithful DNA repair, it may affect the stability of mitochondrial DNA, influencing mitochondrial apoptotic signaling and in this way change the sensitivity of CML cells to TKIs. Moreover, cancer cells, including BCR/ABL-positive cells, show an increased level of glucose metabolism, resulting from the shift from oxidative phosphorylation to glycolysis to supply ATP for extensive proliferation. Enhanced level of glycolysis may be associated with TKI resistance and requires change in the expression of several genes regulated mostly by hypoxia-inducible factor-1α, HIF-1α. Such regulation may be associated with the impaired mitochondrial respiratory system in CML cells. In summary, mitochondria and mitochondria-associated molecules and pathways may be attractive targets to overcome TKI resistance in CML.

  5. The role of mitochondrial DNA damage and repair in the resistance of BCR/ABL-expressing cells to tyrosine kinase inhibitors.

    Science.gov (United States)

    Glowacki, Sylwester; Synowiec, Ewelina; Blasiak, Janusz

    2013-08-07

    Chronic myeloid leukemia (CML) is a hematological malignancy that arises from the transformation of stem hematopoietic cells by the fusion oncogene BCR/ABL and subsequent clonal expansion of BCR/ABL-positive progenitor leukemic cells. The BCR/ABL protein displays a constitutively increased tyrosine kinase activity that alters many regulatory pathways, leading to uncontrolled growth, impaired differentiation and increased resistance to apoptosis featured by leukemic cells. Current CML therapy is based on tyrosine kinase inhibitors (TKIs), primarily imatinib, which induce apoptosis in leukemic cells. However, some patients show primary resistance to TKIs while others develop it in the course of therapy. In both cases, resistance may be underlined by perturbations in apoptotic signaling in leukemic cells. As mitochondria may play an important role in such signaling, alteration in mitochondrial metabolism may change resistance to pro-apoptotic action of TKIs in BCR/ABL-positive cells. Because BCR/ABL may induce reactive oxygen species and unfaithful DNA repair, it may affect the stability of mitochondrial DNA, influencing mitochondrial apoptotic signaling and in this way change the sensitivity of CML cells to TKIs. Moreover, cancer cells, including BCR/ABL-positive cells, show an increased level of glucose metabolism, resulting from the shift from oxidative phosphorylation to glycolysis to supply ATP for extensive proliferation. Enhanced level of glycolysis may be associated with TKI resistance and requires change in the expression of several genes regulated mostly by hypoxia-inducible factor-1α, HIF-1α. Such regulation may be associated with the impaired mitochondrial respiratory system in CML cells. In summary, mitochondria and mitochondria-associated molecules and pathways may be attractive targets to overcome TKI resistance in CML.

  6. Flood damage curves for consistent global risk assessments

    Science.gov (United States)

    de Moel, Hans; Huizinga, Jan; Szewczyk, Wojtek

    2016-04-01

    Assessing potential damage of flood events is an important component in flood risk management. Determining direct flood damage is commonly done using depth-damage curves, which denote the flood damage that would occur at specific water depths per asset or land-use class. Many countries around the world have developed flood damage models using such curves which are based on analysis of past flood events and/or on expert judgement. However, such damage curves are not available for all regions, which hampers damage assessments in those regions. Moreover, due to different methodologies employed for various damage models in different countries, damage assessments cannot be directly compared with each other, obstructing also supra-national flood damage assessments. To address these problems, a globally consistent dataset of depth-damage curves has been developed. This dataset contains damage curves depicting percent of damage as a function of water depth as well as maximum damage values for a variety of assets and land use classes (i.e. residential, commercial, agriculture). Based on an extensive literature survey concave damage curves have been developed for each continent, while differentiation in flood damage between countries is established by determining maximum damage values at the country scale. These maximum damage values are based on construction cost surveys from multinational construction companies, which provide a coherent set of detailed building cost data across dozens of countries. A consistent set of maximum flood damage values for all countries was computed using statistical regressions with socio-economic World Development Indicators from the World Bank. Further, based on insights from the literature survey, guidance is also given on how the damage curves and maximum damage values can be adjusted for specific local circumstances, such as urban vs. rural locations, use of specific building material, etc. This dataset can be used for consistent supra

  7. Composite delamination depth profiling in sonic-IR imaging

    Science.gov (United States)

    Zhao, Selina X.; Han, Xiaoyan; Favro, Lawrence D.; Newaz, Golam; Thomas, Robert L.

    2012-05-01

    Impact damage remains a major issue for aerospace composite structures. Considerable internal damage can occur in laminated composites from external impact loads in service with only minimal visual detectability from the surface of the structure. Damage can occur at any ply depth without visual indications on the front surface. Accurate depth measurements can aid repair assessments. This method is focused on investigating depth profiling of composite delamination by using Sonic-IR, which is a nondestructive evaluation method (NDE) technique that makes images of defects using an infrared camera with an ultrasonic transducer as a stimulation source. The depth profiling relies on the time delays of the temperature increases at the surface from the different defect depths. To process the time vs. temperature data captured from the camera, polynomial curve fitting was used. A mathematical model has been built to calculated time vs. second derivative of temperature curves for depth measurements. The samples used to calibrate the mathematical model data are carbon fiber composite panels with ply thickness variance and inserts with known depths.

  8. Macropis fulvipes Venom component Macropin Exerts its Antibacterial and Anti-Biofilm Properties by Damaging the Plasma Membranes of Drug Resistant Bacteria.

    Science.gov (United States)

    Ko, Su Jin; Kim, Min Kyung; Bang, Jeong Kyu; Seo, Chang Ho; Luchian, Tudor; Park, Yoonkyung

    2017-11-29

    The abuse of antibiotics for disease treatment has led to the emergence of multidrug resistant bacteria. Antimicrobial peptides, found naturally in various organisms, have received increasing interest as alternatives to conventional antibiotics because of their broad spectrum antimicrobial activity and low cytotoxicity. In a previous report, Macropin, isolated from bee venom, exhibited antimicrobial activity against both gram-positive and negative bacteria. In the present study, Macropin was synthesized and its antibacterial and anti-biofilm activities were tested against bacterial strains, including gram-positive and negative bacteria, and drug resistant bacteria. Moreover, Macropin did not exhibit hemolytic activity and cytotoxicity to keratinocytes, whereas Melittin, as a positive control, showed very high toxicity. Circular dichroism assays showed that Macropin has an α-helical structure in membrane mimic environments. Macropin binds to peptidoglycan and lipopolysaccharide and kills the bacteria by disrupting their membranes. Moreover, the fractional inhibitory concentration index indicated that Macropin has additive and partially synergistic effects with conventional antibiotics against drug resistant bacteria. Thus, our study suggested that Macropin has potential for use of an antimicrobial agent for infectious bacteria, including drug resistant bacteria.

  9. Radiation damage

    CERN Document Server

    Heijne, Erik H M; CERN. Geneva

    1998-01-01

    a) Radiation damage in organic materials. This series of lectures will give an overview of radiation effects on materials and components frequently used in accelerator engineering and experiments. Basic degradation phenomena will be presented for organic materials with comprehensive damage threshold doses for commonly used rubbers, thermoplastics, thermosets and composite materials. Some indications will be given for glass, scintillators and optical fibres. b) Radiation effects in semiconductor materials and devices. The major part of the time will be devoted to treat radiation effects in semiconductor sensors and the associated electronics, in particular displacement damage, interface and single event phenomena. Evaluation methods and practical aspects will be shown. Strategies will be developed for the survival of the materials under the expected environmental conditions of the LHC machine and detectors. I will describe profound revolution in our understanding of black holes and their relation to quantum me...

  10. Institutional Strength in Depth

    International Nuclear Information System (INIS)

    Weightman, M.

    2016-01-01

    Much work has been undertaken in order to identify, learn and implement the lessons from the TEPCO Fukushima Daiichi nuclear accident. These have mainly targeted on engineering or operational lessons. Less attention has been paid to the institutional lessons, although there have been some measures to improve individual peer reviews, particularly by the World Association of Nuclear Operators, and the authoritative IAEA report published in 2015 brought forward several important lessons for regulators and advocated a system approach. The report noted that one of the contributing factors the accident was the tendency of stakeholders not to challenge. Additionally, it reported deficiencies in the regulatory authority and system. Earlier, the root cause of the accident was identified by a Japanese independent parliamentary report as being cultural and institutional. The sum total of the institutions, the safety system, was ineffective. While it is important to address the many technical and operational lessons these may not necessary address this more fundamental lesson, and may not serve to provide robust defences against human or institutional failings over a wide variety of possible events and combinations. The overall lesson is that we can have rigorous and comprehensive safety standards and other tools in place to deliver high levels of safety, but ultimately what is important is the ability of the nuclear safety system to ensure that the relevant institutions diligently and effectively apply those standards and tools — to be robust and resilient. This has led to the consideration of applying the principles of the strength in depth philosophy to a nuclear safety system as a way of providing a framework for developing, assessing, reviewing and improving the system. At an IAEA conference in October 2013, a model was presented for a robust national nuclear safety system based on strength in depth philosophy. The model highlighted three main layers: industry, the

  11. Offshore Wind Technology Depth Zones

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Coastal bathymetric depth, measured in meters at depth values of: -30, -60, -900 Shallow Zone (0-30m): Technology has been demonstrated on a commercial scale at...

  12. X-ray damage in optical coatings

    Science.gov (United States)

    Burkhalter, P. G.; Ripin, B. H.; Elton, R. C.; Grun, J.; Manka, C. K.; Konnert, J. H.; Burris, H. R.; Newman, D. A.

    1995-01-01

    Thin film coatings are susceptible to high intensity x-ray damage. The PHAROS III laser was utilized to generate a point source of x-ray emission used to determine the damage threshold of AR-coated space optics. Thin filters coupled with magnets were used to shield the specimens from thermal radiation and plasma debris. Grids supporting the thin filters could be patterned into the coatings. The surface morphology of damaged specimens has been examined with SEM and AFM microscopes to determine the nature of the damage in multilayer AR coatings. Microscopic techniques were used to measure the depths of coating damage and edge sharpness in the patterned region.

  13. Tort Damages

    NARCIS (Netherlands)

    L.T. Visscher (Louis)

    2008-01-01

    textabstractAbstract: In this Chapter, I provide an overview of Law and Economics literature regarding tort damages. Where necessary, attention is also spent to rules of tort liability. Both types of rules provide behavioral incentives to both injurers and victims, with respect to their level of

  14. The tomato UV-damaged DNA-binding protein-1 (DDB1) is implicated in pathogenesis-related (PR) gene expression and resistance to Agrobacterium tumefaciens.

    Science.gov (United States)

    Liu, Jikai; Li, Hanjing; Miao, Min; Tang, Xiaofeng; Giovannoni, Jim; Xiao, Fangming; Liu, Yongsheng

    2012-02-01

    Plants defend themselves against potential pathogens via the recognition of pathogen-associated molecular patterns (PAMPs). However, the molecular mechanisms underlying this PAMP-triggered immunity (PTI) are largely unknown. In this study, we show that tomato HP1/DDB1, coding for a key component of the CUL4-based ubiquitin E3 ligase complex, is required for resistance to Agrobacterium tumefaciens. We found that the DDB1-deficient mutant (high pigment-1, hp1) is susceptible to nontumorigenic A. tumefaciens. The efficiency of callus generation from the hp1 cotyledons was extremely low as a result of the necrosis caused by Agrobacterium infection. On infiltration of nontumorigenic A. tumefaciens into leaves, the hp1 mutant moderately supported Agrobacterium growth and developed disease symptoms, but the expression of the pathogenesis-related gene SlPR1a1 and several PTI marker genes was compromised at different levels. Moreover, exogenous application of salicylic acid (SA) triggered SlPR1a1 gene expression and enhanced resistance to A. tumefaciens in wild-type tomato plants, whereas these SA-regulated defence responses were abolished in hp1 mutant plants. Thus, HP1/DDB1 may function through interaction with the SA-regulated PTI pathway in resistance against Agrobacterium infection. © 2011 THE AUTHORS. MOLECULAR PLANT PATHOLOGY © 2011 BSPP AND BLACKWELL PUBLISHING LTD.

  15. Fe model predicting the increase in seismic resistance induced by the progressive FRP strengthening on already damaged masonry arches subjected to settlement

    Science.gov (United States)

    Stockdale, G.; Milani, G.

    2017-11-01

    In seismic regions, the retrofitting of masonry structures subjected to differential foundation settlements is of the upmost importance. This practice however poses significant challenges, most notably in the consideration of historical monuments where the integrity of the original structure must be weighted alongside public safety. Fiber reinforced polymers (FRPs), when appropriately applied, provide the potential to balance this duality of heritage preservation and modern safety. Using an advanced FE point of view, this work studies the seismic response of a progressive reinforcement strategy aimed at strengthening and controlling the failure mechanism for masonry arches that exist in a damaged state induced through a differential abutment settlement. A heterogeneous FE approach of a semi-circular block and mortar arch on continuously spreading supports is examined. In this model hinge formation is obtained by assigning a damage plasticity behavior to the mortar joints. Strategically placed FRPs, designed through the utilization of the Italian CNR recommendations for externally bonded FRP systems, are applied through the Abaqus birth and death approach and introduced to the spreading support model after settlement. Finally, the structural behavior of the reinforced and unreinforced models are examined for a seismic response.

  16. Estimation uncertainty of direct monetary flood damage to buildings

    Directory of Open Access Journals (Sweden)

    B. Merz

    2004-01-01

    Full Text Available Traditional flood design methods are increasingly supplemented or replaced by risk-oriented methods which are based on comprehensive risk analyses. Besides meteorological, hydrological and hydraulic investigations such analyses require the estimation of flood impacts. Flood impact assessments mainly focus on direct economic losses using damage functions which relate property damage to damage-causing factors. Although the flood damage of a building is influenced by many factors, usually only inundation depth and building use are considered as damage-causing factors. In this paper a data set of approximately 4000 damage records is analysed. Each record represents the direct monetary damage to an inundated building. The data set covers nine flood events in Germany from 1978 to 1994. It is shown that the damage data follow a Lognormal distribution with a large variability, even when stratified according to the building use and to water depth categories. Absolute depth-damage functions which relate the total damage to the water depth are not very helpful in explaining the variability of the damage data, because damage is determined by various parameters besides the water depth. Because of this limitation it has to be expected that flood damage assessments are associated with large uncertainties. It is shown that the uncertainty of damage estimates depends on the number of flooded buildings and on the distribution of building use within the flooded area. The results are exemplified by a damage assessment for a rural area in southwest Germany, for which damage estimates and uncertainty bounds are quantified for a 100-year flood event. The estimates are compared to reported flood damages of a severe flood in 1993. Given the enormous uncertainty of flood damage estimates the refinement of flood damage data collection and modelling are major issues for further empirical and methodological improvements.

  17. Phosphorylation of eIF4E Confers Resistance to Cellular Stress and DNA-Damaging Agents through an Interaction with 4E-T: A Rationale for Novel Therapeutic Approaches.

    Directory of Open Access Journals (Sweden)

    Alba Martínez

    Full Text Available Phosphorylation of the eukaryotic translation initiation factor eIF4E is associated with malignant progression and poor cancer prognosis. Accordingly, here we have analyzed the association between eIF4E phosphorylation and cellular resistance to oxidative stress, starvation, and DNA-damaging agents in vitro. Using immortalized and cancer cell lines, retroviral expression of a phosphomimetic (S209D form of eIF4E, but not phospho-dead (S209A eIF4E or GFP control, significantly increased cellular resistance to stress induced by DNA-damaging agents (cisplatin, starvation (glucose+glutamine withdrawal, and oxidative stress (arsenite. De novo accumulation of eIF4E-containing cytoplasmic bodies colocalizing with the eIF4E-binding protein 4E-T was observed after expression of phosphomimetic S209D, but not S209A or wild-type eIF4E. Increased resistance to cellular stress induced by eIF4E-S209D was lost upon knockdown of endogenous 4E-T or use of an eIF4E-W73A-S209D mutant unable to bind 4E-T. Cancer cells treated with the Mnk1/2 inhibitor CGP57380 to prevent eIF4E phosphorylation and mouse embryonic fibroblasts derived from Mnk1/2 knockout mice were also more sensitive to arsenite and cisplatin treatment. Polysome analysis revealed an 80S peak 2 hours after arsenite treatment in cells overexpressing phosphomimetic eIF4E, indicating translational stalling. Nonetheless, a selective increase was observed in the synthesis of some proteins (cyclin D1, HuR, and Mcl-1. We conclude that phosphorylation of eIF4E confers resistance to various cell stressors and that a direct interaction or regulation of 4E-T by eIF4E is required. Further delineation of this process may identify novel therapeutic avenues for cancer treatment, and these results support the use of modern Mnk1/2 inhibitors in conjunction with standard therapy.

  18. Phosphorylation of eIF4E Confers Resistance to Cellular Stress and DNA-Damaging Agents through an Interaction with 4E-T: A Rationale for Novel Therapeutic Approaches

    Science.gov (United States)

    Martínez, Alba; Sesé, Marta; Losa, Javier Hernandez; Robichaud, Nathaniel; Sonenberg, Nahum; Aasen, Trond; Ramón y Cajal, Santiago

    2015-01-01

    Phosphorylation of the eukaryotic translation initiation factor eIF4E is associated with malignant progression and poor cancer prognosis. Accordingly, here we have analyzed the association between eIF4E phosphorylation and cellular resistance to oxidative stress, starvation, and DNA-damaging agents in vitro. Using immortalized and cancer cell lines, retroviral expression of a phosphomimetic (S209D) form of eIF4E, but not phospho-dead (S209A) eIF4E or GFP control, significantly increased cellular resistance to stress induced by DNA-damaging agents (cisplatin), starvation (glucose+glutamine withdrawal), and oxidative stress (arsenite). De novo accumulation of eIF4E-containing cytoplasmic bodies colocalizing with the eIF4E-binding protein 4E-T was observed after expression of phosphomimetic S209D, but not S209A or wild-type eIF4E. Increased resistance to cellular stress induced by eIF4E-S209D was lost upon knockdown of endogenous 4E-T or use of an eIF4E-W73A-S209D mutant unable to bind 4E-T. Cancer cells treated with the Mnk1/2 inhibitor CGP57380 to prevent eIF4E phosphorylation and mouse embryonic fibroblasts derived from Mnk1/2 knockout mice were also more sensitive to arsenite and cisplatin treatment. Polysome analysis revealed an 80S peak 2 hours after arsenite treatment in cells overexpressing phosphomimetic eIF4E, indicating translational stalling. Nonetheless, a selective increase was observed in the synthesis of some proteins (cyclin D1, HuR, and Mcl-1). We conclude that phosphorylation of eIF4E confers resistance to various cell stressors and that a direct interaction or regulation of 4E-T by eIF4E is required. Further delineation of this process may identify novel therapeutic avenues for cancer treatment, and these results support the use of modern Mnk1/2 inhibitors in conjunction with standard therapy. PMID:25923732

  19. Defence in depth perspectives

    International Nuclear Information System (INIS)

    Veneau, Tania; Ferrier, Agnes; Barbaud, Jean

    2017-01-01

    The Defence in Depth (DiD) concept was introduced to the field of nuclear safety in the sixties and early seventies. Even though it was not well developed at the beginning, the principles rapidly became close to those currently used. The concept was then composed of 3 levels, and was already associated with operating conditions. These principles have progressed over time and now there are five levels, including progressively situations issued from design extension conditions, to cope with severe accidents and dealing with accident management off-site. Indeed, human and organizational features are considered as a part of the safety provisions at all levels in an integrated approach that is not just related to reactor design. That's the current vision from IAEA, addressed first in INSAG 3 then in INSAG 10, and in the IAEA standards requirements currently addressed by SSR-2/1 superseding NS-R-1). These five levels of DiD are also referred to in other texts including WENRA documents in Europe, but also in the national requirements from different countries. Thus, the application of DiD principle has become a recognized international practice. The 2011 Fukushima Daiichi accidents, even if they raised many questions on nuclear safety issues, confirmed the merits of the DiD concept. Indeed, lessons learned from the accidents have reinforced the use of the DiD concept to ensure adequate safety. The discussions focused more on the implementation of the concept (how it has been or can be used in practice) than the concept itself, and in particular on the following subjects: the notion of level robustness, generally addressed separately from the levels definition, but playing an important role for the efficiency of the concept; the notion of levels independence and the need for strengthening them; the role of diversity to achieve levels independence. However, a prescription of additional diversity and independence across all safety levels could result in inappropriately

  20. Effect of Cavitation on Surface Damage of 16.7Cr-10Ni-2Mo Stainless Steel in Marine Environment

    International Nuclear Information System (INIS)

    Chong, Sang-Ok; Han, Min-Su; Kim, Seong-Jong

    2015-01-01

    Stainless steel is generally known to have characteristics of excellent corrosion resistance and durability, but in a marine environment it can suffer from localized corrosion due to the breakdown of passivity film due to chloride ion in seawater. Furthermore, the damage behaviors are sped up under a cavitation environment because of complex damage from electrochemical corrosion and cavitation-erosion. In this study the characteristics of electrochemical corrosion and cavitation erosion behavior were evaluated on 16.7Cr-10Ni-2Mo stainless steel under a cavitation environment in natural seawater. The electrochemical experiments have been conducted at both static conditions and dynamic conditions inducing cavitation with different current density parameters. The surface morphology and damage behaviors were compared after the experiment. After the cavitation test with time variables morphological examinations on damaged specimens were analyzed by using a scanning electron microscope and a 3D microscope. the galvanostatic experiment gave a cleaner surface morphology presented with less damage depth at high current density regions. It is due to the effect of water cavitation peening under the cavitation condition. In the cavitation experiment, with amplitude of 30 μm and seawater temperature of 25 ℃, weight loss and cavitation-erosion damage depth were dramatically increased after 5 hours inducing cavitation

  1. Evaluation of Depth of Field for depth perception in DVR

    KAUST Repository

    Grosset, A.V.Pascal

    2013-02-01

    In this paper we present a user study on the use of Depth of Field for depth perception in Direct Volume Rendering. Direct Volume Rendering with Phong shading and perspective projection is used as the baseline. Depth of Field is then added to see its impact on the correct perception of ordinal depth. Accuracy and response time are used as the metrics to evaluate the usefulness of Depth of Field. The onsite user study has two parts: static and dynamic. Eye tracking is used to monitor the gaze of the subjects. From our results we see that though Depth of Field does not act as a proper depth cue in all conditions, it can be used to reinforce the perception of which feature is in front of the other. The best results (high accuracy & fast response time) for correct perception of ordinal depth occurs when the front feature (out of the two features users were to choose from) is in focus and perspective projection is used. © 2013 IEEE.

  2. Magnetotelluric inversion for depth-to-basement estimation

    DEFF Research Database (Denmark)

    Cai, Hongzhu; Zhdanov, Michael

    2015-01-01

    The magnetotelluric (MT) method can be effectively applied for depth-to-basement estimation, because there exists a strong contrast in resistivity between a conductive sedimentary basin and a resistive crystalline basement. Conventional inversions of MT data are usually aimed at determining...... the volumetric distribution of the conductivity within the inversion domain. By the nature of the MT method, the recovered distribution of the subsurface conductivity is typically diffusive, which makes it difficult to select the sediment-basement interface. This paper develops a novel approach to 3D MT...... inversion for the depth-to-basement estimate. The key to this approach is selection of the model parameterization with the depth to basement being the major unknown parameter. In order to estimate the depth to the basement, the inversion algorithm recovers both the thickness and the conductivities...

  3. Resistive Memory Devices for Radiation Resistant Non-Volatile Memory

    Data.gov (United States)

    National Aeronautics and Space Administration — Ionizing radiation in space can damage electronic equipment, corrupting data and even disabling computers. Radiation resistant (rad hard) strategies must be employed...

  4. Damage Tolerance of Resin Transfer Molded Composite Sandwich Constructions

    National Research Council Canada - National Science Library

    Vaidya, U

    1999-01-01

    .... The sandwich composite concepts considered in this study possessed the feasibility to improve the transverse stiffness, provide enhanced damage resistance/tolerance to impact and functionality...

  5. Atomic force microscopy assessment of mechanically induced scratch damage in polypropylenes and ethylene-propylene di-block copolymers

    International Nuclear Information System (INIS)

    Dasari, A.; Rohrmann, J.; Misra, R.D.K.

    2003-01-01

    Atomic force microscopy (AFM) in tapping mode has been used to determine the extent of surface damage induced during a scratch test in different grades of polypropylenes (PPs) and ethylene-propylene (EP) di-block copolymers. The surface damage is examined for long chain polymeric materials and their respective short chains. The extent of surface damage is evaluated in terms of average surface height of the plastically deformed region, depth of the scratch tracks, and thickness and density of the scratch tracks. The ability of the polymeric materials to resist scratch deformation under identical conditions of scratch test follows the sequence (from maximum resistance to minimum resistance): high crystallinity PPs>low crystallinity PPs>EP di-block copolymers. Also, short chain polymeric materials have greater resistance to scratch deformation than their respective long chain polymers. The scratch tracks are zigzag in PPs and parabolic in EP di-block copolymers with localized plastic flow involving voids. It is interpreted that modulus and yield strength are the determining factors that dictate the scratch resistance of polymeric materials

  6. On evaluation of depth accuracy in consumer depth sensors

    Science.gov (United States)

    Abd Aziz, Azim Zaliha; Wei, Hong; Ferryman, James

    2015-12-01

    This paper presents an experimental study of different depth sensors. The aim is to answer the question, whether these sensors give accurate data for general depth image analysis. The study examines the depth accuracy between three popularly used depth sensors; ASUS Xtion Prolive, Kinect Xbox 360 and Kinect for Windows v2. The main attention is to study on the stability of pixels in the depth image captured at several different sensor-object distances by measuring the depth returned by the sensors within specified time intervals. The experimental results show that the fluctuation (mm) of the random selected pixels within the target area, increases with increasing distance to the sensor, especially on the Kinect for Xbox 360 and the Asus Xtion Prolive. Both of these sensors provide pixels fluctuation between 20mm and 30mm at a sensor-object distance beyond 1500mm. However, the pixel's stability of the Kinect for Windows v2 not affected much with the distance between the sensor and the object. The maximum fluctuation for all the selected pixels of Kinect for Windows v2 is approximately 5mm at sensor-object distance of between 800mm and 3000mm. Therefore, in the optimal distance, the best stability achieved.

  7. ISLSCP II Ecosystem Rooting Depths

    Data.gov (United States)

    National Aeronautics and Space Administration — The goal of this study was to predict the global distribution of plant rooting depths based on data about global aboveground vegetation structure and climate....

  8. ISLSCP II Ecosystem Rooting Depths

    Data.gov (United States)

    National Aeronautics and Space Administration — ABSTRACT: The goal of this study was to predict the global distribution of plant rooting depths based on data about global aboveground vegetation structure and...

  9. Structural damage

    International Nuclear Information System (INIS)

    Gray, R.E.; Bruhn, R.W.

    1992-01-01

    Virtually all structures show some signs of distress due to deterioration of the building components, to changed loads, or to changed support conditions. Changed support conditions result from ground movements. In mining regions many cases of structural distress are attributed to mining without considering alternative causes. This is particularly true of coal mining since it occurs under extensive areas. Coal mining is estimated to have already undermined more than eight million acres and may eventually undermine 40 million acres in the United States. Other nonmetal and metal underground mines impact much smaller areas. Although it is sometimes difficult, even with careful study, to identify the actual cause of damage, persons responsible for underground coal mining should at least be aware of possible causes of building stress other than mine subsidence. This paper presents information on distress to structures and briefly reviews a number of causes of ground movements other than subsidence: Mass movements, dissolution, erosion, frost action, shrinking and swelling, yield into excavations and compressibility

  10. Damaged Skylab

    Science.gov (United States)

    1973-01-01

    The Saturn V vehicle, carrying the unmarned orbital workshop for the Skylab-1 mission, lifted off successfully and all systems performed normally. Sixty-three seconds into the flight, engineers in the operation support and control center saw an unexpected telemetry indication that signalled that damages occurred on one solar array and the micrometeoroid shield during the launch. The micrometeoroid shield, a thin protective cylinder surrounding the workshop protecting it from tiny space particles and the sun's scorching heat, ripped loose from its position around the workshop. This caused the loss of one solar wing and jammed the other. Still unoccupied, the Skylab was stricken with the loss of the heat shield and sunlight beat mercilessly on the lab's sensitive skin. Internal temperatures soared, rendering the station uninhabitable, threatening foods, medicines, films, and experiments. This image, taken during a fly-around inspection by the Skylab-2 crew, shows a crippled Skylab in orbit. The crew found their home in space to be in serious shape; the heat shield gone, one solar wing gone, and the other jammed. The Marshall Space Flight Center (MSFC) developed, tested, rehearsed, and approved three repair options. These options included a parasol sunshade and a twin-pole sunshade to restore the temperature inside the workshop, and a set of metal cutting tools to free the jammed solar panel.

  11. Influence of Anchoring on Burial Depth of Submarine Pipelines.

    Science.gov (United States)

    Zhuang, Yuan; Li, Yang; Su, Wei

    2016-01-01

    Since the beginning of the twenty-first century, there has been widespread construction of submarine oil-gas transmission pipelines due to an increase in offshore oil exploration. Vessel anchoring operations are causing more damage to submarine pipelines due to shipping transportation also increasing. Therefore, it is essential that the influence of anchoring on the required burial depth of submarine pipelines is determined. In this paper, mathematical models for ordinary anchoring and emergency anchoring have been established to derive an anchor impact energy equation for each condition. The required effective burial depth for submarine pipelines has then been calculated via an energy absorption equation for the protection layer covering the submarine pipelines. Finally, the results of the model calculation have been verified by accident case analysis, and the impact of the anchoring height, anchoring water depth and the anchor weight on the required burial depth of submarine pipelines has been further analyzed.

  12. Depth-profiling using X-ray photoelectron spectroscopy

    International Nuclear Information System (INIS)

    Pijolat, M.; Hollinger, G.

    1980-12-01

    The possibilities of X-ray photoelectron spectroscopy (or ESCA) for depth-profiling into shallow depths (approximately 10-100 A) have been studied. The method of ion-sputtering removal has first been investigated in order to improve its depth-resolution (approximately 50-150 A). A procedure which eliminates the effects due to the resolution function of the instrumental probe (analysed depth approximately 50 A) has been settled; but it is not yet sufficient, and the sputter - broadening due to the ion-induced damages must be taken into account (broadening function approximately 50 A for approximately 150 A removal). Because of serious difficulties in estimating the broadening function an alternative is to develop non destructive methods, so a new method based on the dependence of the analysed depth with the electron emission angle is presented. The extraction of the concentration profile from angular distribution experiments is achieved, in the framework of a flat-layer model, by minimizing the difference between theoretical and experimental relative intensities. The applicability and limitations of the method are discussed on the basis of computer simulation results. The depth probed is of the order of 3 lambda (lambda being the value of the inelastic mean free path, typically 10-20 A) and the depth-resolution is of the order of lambda/3 [fr

  13. Low resistivity and permeability in actively deforming shear zones on the San Andreas Fault at SAFOD

    Science.gov (United States)

    Morrow, Carolyn A.; Lockner, David A.; Hickman, Stephen H.

    2015-01-01

    The San Andreas Fault Observatory at Depth (SAFOD) scientific drillhole near Parkfield, California crosses the San Andreas Fault at a depth of 2.7 km. Downhole measurements and analysis of core retrieved from Phase 3 drilling reveal two narrow, actively deforming zones of smectite-clay gouge within a roughly 200 m-wide fault damage zone of sandstones, siltstones and mudstones. Here we report electrical resistivity and permeability measurements on core samples from all of these structural units at effective confining pressures up to 120 MPa. Electrical resistivity (~10 ohm-m) and permeability (10-21 to 10-22 m2) in the actively deforming zones were one to two orders of magnitude lower than the surrounding damage zone material, consistent with broader-scale observations from the downhole resistivity and seismic velocity logs. The higher porosity of the clay gouge, 2 to 8 times greater than that in the damage zone rocks, along with surface conduction were the principal factors contributing to the observed low resistivities. The high percentage of fine-grained clay in the deforming zones also greatly reduced permeability to values low enough to create a barrier to fluid flow across the fault. Together, resistivity and permeability data can be used to assess the hydrogeologic characteristics of the fault, key to understanding fault structure and strength. The low resistivities and strength measurements of the SAFOD core are consistent with observations of low resistivity clays that are often found in the principal slip zones of other active faults making resistivity logs a valuable tool for identifying these zones.

  14. An investigation of rolling-sliding contact fatigue damage of carburized gear steels

    Science.gov (United States)

    Kramer, Patrick C.

    The goal of this study was to evaluate the differences in RSCF performance between vacuum and gas carburized steels as well as to investigate the evolution of damage (wear and microstructure changes) leading to pitting. Vacuum and gas carburizing was performed on two gear steels (4120 and 4320) at 1010°C. The carburized specimens were tested in the as-carburized condition using a RSCF machine designed and built at the Colorado School of Mines. The tests were conducted at 3.2 GPa nominal Hertzian contact stress, based on pure rolling, 100°C, and using a negative twenty percent slide ratio. Tests were conducted to pitting failure for each condition for a comparison of the average fatigue lives. Pure rolling tests were also conducted, and were suspended at the same number of cycles as the average RSCF life for a comparison of fatigue damage developed by RCF and RSCF. Incremental tests were suspended at 1,000, 10,000, 100,000, and 200,000 cycles for the vacuum carburized steels to evaluate the wear and damage developed during the initial cycles of RSCF testing and to relate the wear and damage to pitting resistance. Incremental damage was not investigated for gas carburizing due to the limited number of available specimens. The vacuum carburized samples showed a decreased pitting fatigue resistance over the gas carburized samples, possibly due to the presence of bainite in the vacuum carburized cases. Pitting was observed to initiate from surface micropitting and microcracking. A microstructural change induced by contact fatigue, butterflies, was shown to contribute to micropitting and microcracking. Incremental testing revealed that the formation of a microcrack preceded and was necessary for the formation of the butterfly features, and that the butterfly features developed between 10,000 and 100,000 cycles. The orientation and depth of butterfly formation was shown to be dependent upon the application of traction stresses from sliding. RSCF butterflies formed

  15. Depth estimation via stage classification

    NARCIS (Netherlands)

    Nedović, V.; Smeulders, A.W.M.; Redert, A.; Geusebroek, J.M.

    2008-01-01

    We identify scene categorization as the first step towards efficient and robust depth estimation from single images. Categorizing the scene into one of the geometric classes greatly reduces the possibilities in subsequent phases. To that end, we introduce 15 typical 3D scene geometries, called

  16. Factors that affect keratotomy depth.

    Science.gov (United States)

    Merlin, U; Bordin, P; Rimondi, A P; Sichirollo, R

    1991-01-01

    The authors investigated nine factors which can affect the depth of incisions performed during refractive keratotomy: (1) vertical vs oblique-cutting edge of the knife blade, (2) direction of cutting, (3) cutting velocity, (4) American vs Russian technique, (5) intraocular pressure (IOP), (6) initial vs final incisions, (7) sharpness of knife blade, (8) single vs double footplate, and (9) square vs double-edged blade. These variables were examined independently, performing at least 40 incisions for each experimental parameter studied. The depth of the resulting incisions was measured histologically using the micrometer eyepiece. The average and the standard deviation were calculated. The paired Student's t-test was used to establish significant differences between the two conditions investigated for each parameter. Factors that were demonstrated to increase significantly the depth of the incisions included: the vertical-cutting edge, the triple-edged diamond knife, the sharpness of the knife, and the single foot knife. High velocity in performing the incisions and, to a lesser extent, low IOP were the main factors that induced irregularity in depth.

  17. Junction depth measurement using carrier illumination

    International Nuclear Information System (INIS)

    Borden, Peter

    2001-01-01

    Carrier Illumination [trade mark] (CI) is a new method recently developed to meet the need for a non-destructive, high throughput junction depth measurement on patterned wafers. A laser beam creates a quasi-static excess carrier profile in the semiconductor underlying the activated junction. The excess carrier profile is fairly constant below the junction, and drops rapidly in the junction, creating a steep index of refraction gradient at the junction edge. Interference with light reflected from this index gradient provides a signal that is analyzed to determine the junction depth. The paper summarizes evaluation of performance in full NMOS and PMOS process flows, on both bare and patterned wafers. The aims have been to validate (1) performance in the presence of underlying layers typically found at the source/drain (S/D) process steps and (2) measurement on patterned wafers. Correlation of CI measurements to SIMS and transistor drive current are shown. The data were obtained from NMOS structures using As S/D and LDD implants. Correlations to SRP, SIMS and sheet resistance are shown for PMOS structures using B 11 LDD implants. Gage capability measurements are also presented

  18. Molecular depth profiling of organic and biological materials

    Energy Technology Data Exchange (ETDEWEB)

    Fletcher, John S. [Surface Analysis Research Centre, School of Chemical Engineering and Analytical Science, University of Manchester, Manchester M60 1QD (United Kingdom)]. E-mail: John.Fletcher@manchester.ac.uk; Conlan, Xavier A. [Surface Analysis Research Centre, School of Chemical Engineering and Analytical Science, University of Manchester, Manchester M60 1QD (United Kingdom); Lockyer, Nicholas P. [Surface Analysis Research Centre, School of Chemical Engineering and Analytical Science, University of Manchester, Manchester M60 1QD (United Kingdom); Vickerman, John C. [Surface Analysis Research Centre, School of Chemical Engineering and Analytical Science, University of Manchester, Manchester M60 1QD (United Kingdom)

    2006-07-30

    Atomic depth profiling using secondary ion mass spectrometry, SIMS, is common in the field micro-electronics; however, the generation of molecular information as a function of sample depth is difficult due to the accumulation of damage both on and beneath the sample surface. The introduction of polyatomic ion beams such as SF{sub 5} and C{sub 60} have raised the possibility of overcoming this problem as they deposit the majority of their energy in the upper surface of the sample resulting in increased sputter yields but with a complimentary reduction in sub-surface damage accumulation. In this paper we report the depth profile analysis of the bio-polymer polycaprolactone, PCL, using the polyatomic ions Au{sub 3}{sup +} and C{sub 60}{sup +} and the monoatomic Au{sup +}. Results are compared to recent analysis of a similar sample using SF{sub 5}{sup +}. C{sub 60}{sup +} depth profiling of cellulose is also demonstrated, an experiment that has been reported as unsuccessful when attempted with SF{sub 5}{sup +} implications for biological analysis are discussed.

  19. Limit of crustal drilling depth

    Directory of Open Access Journals (Sweden)

    Y.S. Zhao

    2017-10-01

    Full Text Available Deep drilling is becoming the direct and the most efficient means in exploiting deep mineral resources, facilitating to understanding the earthquake mechanism and performing other scientific researches on the Earth's crust. In order to understand the limit of drilling depth in the Earth's crust, we first conducted tests on granite samples with respect to the borehole deformation and stability under high temperature and high pressure using the triaxial servo-controlled rock testing system. Then the critical temperature-pressure coupling conditions that result in borehole instability are derived. Finally, based on the testing results obtained and the requirements for the threshold values of borehole deformations during deep drilling, the limit of drilling depth in the Earth's crust is formulated with ground temperature.

  20. Applications of positron depth profiling

    International Nuclear Information System (INIS)

    Hakvoort, R.A.

    1993-01-01

    In this thesis some contributions of the positron-depth profiling technique to materials science have been described. Following studies are carried out: Positron-annihilation measurements on neon-implanted steel; Void creation in silicon by helium implantation; Density of vacancy-type defects present in amorphous silicon prepared by ion implantation; Measurements of other types of amorphous silicon; Epitaxial cobalt disilicide prepared by cobalt outdiffusion. Positron-annihilation experiments on low-pressure CVD silicon-nitride films. (orig./MM)

  1. Applications of positron depth profiling

    Energy Technology Data Exchange (ETDEWEB)

    Hakvoort, R.A.

    1993-12-23

    In this thesis some contributions of the positron-depth profiling technique to materials science have been described. Following studies are carried out: Positron-annihilation measurements on neon-implanted steel; Void creation in silicon by helium implantation; Density of vacancy-type defects present in amorphous silicon prepared by ion implantation; Measurements of other types of amorphous silicon; Epitaxial cobalt disilicide prepared by cobalt outdiffusion. Positron-annihilation experiments on low-pressure CVD silicon-nitride films. (orig./MM).

  2. Characterization of eucalyptus clones subject to wind damage

    OpenAIRE

    Zanuncio, Antônio José Vinha; Carvalho, Amélia Guimarães; Carneiro, Angélica de Cassia Oliveira; Valenzuela, Paulina; Gacitúa, William; Leite, Fernando Palha; Colodette, Jorge Luiz

    2017-01-01

    Abstract: The objective of this work was to test a new methodology to assess the resistance of trees to wind damage and determine the characteristics that increase clone resistance to winds. Tree resistance to breakage, basic density, ultrastructure, anatomy, mechanical properties, and wood growth stress have been evaluated in seven Eucalyptus grandis × Eucalyptus urophylla clones, collected from a region with a high incidence of wind damage. The Pearson correlation coefficient between the tr...

  3. Electron beam damage in oxides: a review.

    Science.gov (United States)

    Jiang, Nan

    2016-01-01

    This review summarizes a variety of beam damage phenomena relating to oxides in (scanning) transmission electron microscopes, and underlines the shortcomings of currently popular mechanisms. These phenomena include mass loss, valence state reduction, phase decomposition, precipitation, gas bubble formation, phase transformation, amorphization and crystallization. Moreover, beam damage is also dependent on specimen thickness, specimen orientation, beam voltage, beam current density and beam size. This article incorporates all of these damage phenomena and experimental dependences into a general description, interpreted by a unified mechanism of damage by induced electric field. The induced electric field is produced by positive charges, which are generated from excitation and ionization. The distribution of the induced electric fields inside a specimen is beam-illumination- and specimen-shape- dependent, and associated with the experimental dependence of beam damage. Broadly speaking, the mechanism operates differently in two types of material. In type I, damage increases the resistivity of the irradiated materials, and is thus divergent, resulting in phase separation. In type II, damage reduces the resistivity of the irradiated materials, and is thus convergent, resulting in phase transformation. Damage by this mechanism is dependent on electron-beam current density. The two experimental thresholds are current density and irradiation time. The mechanism comes into effect when these thresholds are exceeded, below which the conventional mechanisms of knock-on and radiolysis still dominate.

  4. Damage analysis: damage function development and application

    International Nuclear Information System (INIS)

    The derivation and application of damage functions, including recent developments for the U.S. LMFBR and CTR programs, is reviewed. A primary application of damage functions is in predicting component life expectancies; i.e., the fluence required in a service spectrum to attain a specified design property change. An important part of the analysis is the estimation of the uncertainty in such fluence limit predictions. The status of standardizing the procedures for the derivation and application of damage functions is discussed. Improvements in several areas of damage function development are needed before standardization can be completed. These include increasing the quantity and quality of the data used in the analysis, determining the limitations of the analysis due to the presence of multiple damage mechanisms, and finally, testing of damage function predictions against data obtained from material surveillance programs in operating thermal and fast reactors. 23 references. (auth)

  5. Material Induced Anisotropic Damage

    NARCIS (Netherlands)

    Niazi, Muhammad Sohail; Wisselink, H.H.; Meinders, Vincent T.; van den Boogaard, Antonius H.; Hora, P.

    2012-01-01

    The anisotropy in damage can be driven by two different phenomena; anisotropic defor-mation state named Load Induced Anisotropic Damage (LIAD) and anisotropic (shape and/or distribution) second phase particles named Material Induced Anisotropic Damage (MIAD). Most anisotropic damage models are based

  6. He+ and H+ microbeam damage, swelling and annealing in diamonds

    International Nuclear Information System (INIS)

    Dooley, S.P.; Jamieson, D.N.; Prawer, S.

    1992-01-01

    The effects of scanned 2 MeV He + and 1.4 MeV H + microbeam irradiation on unimplanted and P implanted diamond are discussed. Although diamond was found to be resistant to lattice defect production, it was found to swell very rapidly in comparison with other materials, giving rise to serious swelling induced dechanneling at scan edges at relatively low doses (10 17 /cm 2 for 2 MeV He + ). Microbeams annealed the damage due to a 1.5 μm deep Phosphorus implantation at a dose of 10 15 P + /cm 2 . The implantation damage was reduced at a dose of (1.6 x 10 17 /cm 2 ) by up to 21 % for 2 MeV He + irradiation, up to 16% for high flux 1.4 MeV H + irradiation and 12% for low flux H + irradiation. For the choice of analysis beam, all these beam effects were found to be most significant for He + microbeams, so H + microbeams should be used for analysis of diamond unless high depth resolution is required. 13 refs., 10 figs

  7. Range and damage distribution in cluster ion implantation

    International Nuclear Information System (INIS)

    Yamada, I.; Matsuo, J.; Jones, E.C.; Takeuchi, D.; Aoki, T.

    1997-01-01

    Cluster ion implantation is an attractive alternative to conventional ion implantation, particularly for shallow junction formation. It is easy to obtain high current ion beams with low equivalent energy using cluster ion beams. The implanted boron distribution in 5 keV B 10 H 14 implanted Si is markedly shallower than that in 5 keV BF 2 ion implanted Si. The implanted depth is less than 0.04 μm, indicating that cluster ion implantation is capable of forming shallow junctions. The sheet resistance of 3 keV B 10 H 14 implanted samples falls below 500 Ω/sq after annealing at 1,000 C for 10s. Shallow implantation can be realized by a high energy cluster beam without space-charge problems in the incident beam. Defect formation, resulting from local energy deposition and multiple collisions, is unique for cluster ions. The thickness of the damaged layer formed by cluster ion bombardment increases with the size of the cluster, if implant energy and ion dose remain constant. This is one of the nonlinear cluster effects, which may allow some control over the implant damage distributions that accompany implanted ions, and which have been shown to have a great effect on dopant redistribution during annealing

  8. Analysis of a school building damaged by the 2015 Ranau earthquake Malaysia

    Science.gov (United States)

    Takano, Shugo; Saito, Taiki

    2017-10-01

    On June 5th, 2015 a severe earthquake with a moment Magnitude of 6.0 occurred in Ranau, Malaysia. Depth of the epicenter is 10 km. Due to the earthquake, many facilities were damaged and 18 people were killed due to rockfalls [1]. Because the British Standard (BS) is adopted as a regulation for built buildings in Malaysia, the seismic force is not considered in the structural design. Therefore, the seismic resistance of Malaysian buildings is unclear. To secure the human life and building safety, it is important to grasp seismic resistance of the building. The objective of this study is to evaluate the seismic resistance of the existing buildings in Malaysia built by the British Standard. A school building that was damaged at the Ranau earthquake is selected as the target building. The building is a four story building and the ground floor is designed to be a parking space for the staff. The structural types are infill masonries where main frame is configured by reinforced concrete columns and beams and brick is installed inside the frame as walls. Analysis is performed using the STERA_3D software that is the software to analyze the seismic performance of buildings developed by one of the authors. Firstly, the natural period of the building is calculated and compared with the result of micro-tremor measurement. Secondly, the nonlinear push-over analysis was conducted to evaluate the horizontal load bearing capacity of the building. Thirdly, the earthquake response analysis was conducted using the time history acceleration data measured at the Ranau earthquake by the seismograph installed at Kota Kinabalu. By comparing the results of earthquake response analysis and the actual damage of the building, the reason that caused damage to the building is clarified.

  9. DNA Damage and Pulmonary Hypertension

    Science.gov (United States)

    Ranchoux, Benoît; Meloche, Jolyane; Paulin, Roxane; Boucherat, Olivier; Provencher, Steeve; Bonnet, Sébastien

    2016-01-01

    Pulmonary hypertension (PH) is defined by a mean pulmonary arterial pressure over 25 mmHg at rest and is diagnosed by right heart catheterization. Among the different groups of PH, pulmonary arterial hypertension (PAH) is characterized by a progressive obstruction of distal pulmonary arteries, related to endothelial cell dysfunction and vascular cell proliferation, which leads to an increased pulmonary vascular resistance, right ventricular hypertrophy, and right heart failure. Although the primary trigger of PAH remains unknown, oxidative stress and inflammation have been shown to play a key role in the development and progression of vascular remodeling. These factors are known to increase DNA damage that might favor the emergence of the proliferative and apoptosis-resistant phenotype observed in PAH vascular cells. High levels of DNA damage were reported to occur in PAH lungs and remodeled arteries as well as in animal models of PH. Moreover, recent studies have demonstrated that impaired DNA-response mechanisms may lead to an increased mutagen sensitivity in PAH patients. Finally, PAH was linked with decreased breast cancer 1 protein (BRCA1) and DNA topoisomerase 2-binding protein 1 (TopBP1) expression, both involved in maintaining genome integrity. This review aims to provide an overview of recent evidence of DNA damage and DNA repair deficiency and their implication in PAH pathogenesis. PMID:27338373

  10. Stress corrosion crack depth investigation using the time reversed elastic nonlinearity diagnostic.

    Science.gov (United States)

    Anderson, Brian E; Pieczonka, Lukasz; Remillieux, Marcel C; Ulrich, Timothy J; Le Bas, Pierre-Yves

    2017-01-01

    Evidence of the ability to probe depth information of stress corrosion cracking (SCC) are presented using the time reversed elastic nonlinearity diagnostic (TREND). Depth estimation of SCC is important to determine when a stainless steel canister has been breached. TREND is a method to focus elastic energy to a point in space in order to probe that point for damage and its' depth penetration is used here to study depth information about SCC. High frequencies are used to probe near the surface, while low frequencies are used to probe deeper into a stainless steel section of a cylinder.

  11. Mathematical Based Calculation of Drug Penetration Depth in Solid Tumors

    Directory of Open Access Journals (Sweden)

    Hamidreza Namazi

    2016-01-01

    Full Text Available Cancer is a class of diseases characterized by out-of-control cells’ growth which affect cells and make them damaged. Many treatment options for cancer exist. Chemotherapy as an important treatment option is the use of drugs to treat cancer. The anticancer drug travels to the tumor and then diffuses in it through capillaries. The diffusion of drugs in the solid tumor is limited by penetration depth which is different in case of different drugs and cancers. The computation of this depth is important as it helps physicians to investigate about treatment of infected tissue. Although many efforts have been made on studying and measuring drug penetration depth, less works have been done on computing this length from a mathematical point of view. In this paper, first we propose phase lagging model for diffusion of drug in the tumor. Then, using this model on one side and considering the classic diffusion on the other side, we compute the drug penetration depth in the solid tumor. This computed value of drug penetration depth is corroborated by comparison with the values measured by experiments.

  12. Estimating floodwater depths from flood inundation maps and topography

    Science.gov (United States)

    Cohen, Sagy; Brakenridge, G. Robert; Kettner, Albert; Bates, Bradford; Nelson, Jonathan M.; McDonald, Richard R.; Huang, Yu-Fen; Munasinghe, Dinuke; Zhang, Jiaqi

    2018-01-01

    Information on flood inundation extent is important for understanding societal exposure, water storage volumes, flood wave attenuation, future flood hazard, and other variables. A number of organizations now provide flood inundation maps based on satellite remote sensing. These data products can efficiently and accurately provide the areal extent of a flood event, but do not provide floodwater depth, an important attribute for first responders and damage assessment. Here we present a new methodology and a GIS-based tool, the Floodwater Depth Estimation Tool (FwDET), for estimating floodwater depth based solely on an inundation map and a digital elevation model (DEM). We compare the FwDET results against water depth maps derived from hydraulic simulation of two flood events, a large-scale event for which we use medium resolution input layer (10 m) and a small-scale event for which we use a high-resolution (LiDAR; 1 m) input. Further testing is performed for two inundation maps with a number of challenging features that include a narrow valley, a large reservoir, and an urban setting. The results show FwDET can accurately calculate floodwater depth for diverse flooding scenarios but also leads to considerable bias in locations where the inundation extent does not align well with the DEM. In these locations, manual adjustment or higher spatial resolution input is required.

  13. Flood damage estimation of companies: A comparison of Stage-Damage-Functions and Random Forests

    Science.gov (United States)

    Sieg, Tobias; Kreibich, Heidi; Vogel, Kristin; Merz, Bruno

    2017-04-01

    The development of appropriate flood damage models plays an important role not only for the damage assessment after an event but also to develop adaptation and risk mitigation strategies. So called Stage-Damage-Functions (SDFs) are often applied as a standard approach to estimate flood damage. These functions assign a certain damage to the water depth depending on the use or other characteristics of the exposed objects. Recent studies apply machine learning algorithms like Random Forests (RFs) to model flood damage. These algorithms usually consider more influencing variables and promise to depict a more detailed insight into the damage processes. In addition they provide an inherent validation scheme. Our study focuses on direct, tangible damage of single companies. The objective is to model and validate the flood damage suffered by single companies with SDFs and RFs. The data sets used are taken from two surveys conducted after the floods in the Elbe and Danube catchments in the years 2002 and 2013 in Germany. Damage to buildings (n = 430), equipment (n = 651) as well as goods and stock (n = 530) are taken into account. The model outputs are validated via a comparison with the actual flood damage acquired by the surveys and subsequently compared with each other. This study investigates the gain in model performance with the use of additional data and the advantages and disadvantages of the RFs compared to SDFs. RFs show an increase in model performance with an increasing amount of data records over a comparatively large range, while the model performance of the SDFs is already saturated for a small set of records. In addition, the RFs are able to identify damage influencing variables, which improves the understanding of damage processes. Hence, RFs can slightly improve flood damage predictions and provide additional insight into the underlying mechanisms compared to SDFs.

  14. Carbon Fiber Damage in Accelerator Beam

    CERN Document Server

    Sapinski, M; Guerrero, A; Koopman, J; Métral, E

    2009-01-01

    Carbon fibers are commonly used as moving targets in Beam Wire Scanners. Because of their thermomechanical properties they are very resistant to particle beams. Their strength deteriorates with time due to radiation damage and low-cycle thermal fatigue. In case of high intensity beams this process can accelerate and in extreme cases the fiber is damaged during a single scan. In this work a model describing the fiber temperature, thermionic emission and sublimation is discussed. Results are compared with fiber damage test performed on SPS beam in November 2008. In conclusions the limits of Wire Scanner operation on high intensity beams are drawn.

  15. COLLOID RELEASE FROM DIFFERENT SOIL DEPTH

    Directory of Open Access Journals (Sweden)

    Gang Chen

    2013-01-01

    Full Text Available Naturally occurring clay colloidal particles are heavily involved in sediment processes in the subsurface soil. Due to the import ance of these processes in the subsurface environment, the transport of clay colloidal particles has been studied in several disciplines, including soil sciences, petr ology, hydrology, etc. Specifically, in environmental engineering, clay colloid re lease and transport in the sediments have been extensively investigated, which are motiv ated by environmental concerns such as colloid-facilitated contaminant transport in groundwater and the subsurface soil. Clay colloid release is resulted from physical alteration of subsurface sediments. Despite the potential importance of clay colloid activiti es, the detailed mechanisms of release and transport of clay colloidal particles with in natural sediments are poorly understood. Pore medium structure, properties and flow dynamics, etc. are factors that affect clay colloid generation, mobilization, and subse quent transport. Possible mechanisms of clay colloid generation in the sediments in clude precipitation, erosion and mobilization by changes in pore water chemistry and clay colloid release depends on a balance of applied hydrodynamic and resisting adhesive torques and forces. The coupled role of pore water chemistry and fluid hydrodynamics thus play key roles in controlling clay colloid release and transport in the sediment s. This paper investigated clay colloidal particle release and transport, especially th e colloidal particle release mechanisms as well as the process modeling in the sediments. In this research, colloidal particle release from intact sediment columns with variable length was examined and colloidal particle release curves were simulated using an im plicit, finite-difference scheme. Colloidal particle release rate coefficient was found to be an exponential function of the sediment depth. The simulated results demonstrated that transport parameters were

  16. Ni ion damage in Cu and Nb

    International Nuclear Information System (INIS)

    Roberto, J.B.; Narayan, J.

    1975-01-01

    Ni ion damage in Cu was studied using x-ray diffuse scattering and transmission electron microscopy, and in Nb using x-ray diffuse scattering. Single crystals of Cu and Nb were irradiated at room temperature to a fluence of 1.2 x 10 13 /cm 2 at 60 MeV, and Cu was also irradiated to 5 x 10 12 /cm 2 at 4 MeV. The x-ray diffuse scattering from loop-type defect clusters in the crystals was measured near several Bragg reflections in order to probe the depth distributions of the damage. In Cu, cluster size distributions derived from the x-ray measurements agreed well with TEM results. Comparison with fission reactor irradiations using the damage energy concept suggests similarities in retained damage between the neutron and Ni ion irradiations

  17. Shear bond strength of glass-ionomer cements to dentin: Effects of dentin depth and type of material activation Resistência ao cisalhamento da união de cimentos de ionômero de vidro à dentina: Efeitos da profundidade do substrato e do tipo de ativação do material

    Directory of Open Access Journals (Sweden)

    Elda PISANESCHI

    1997-01-01

    Full Text Available The purpose of this study was to determine, through the shear bond strength of in vitro tests, that the type of glass-ionomer cements (conventional or hybrid and dentin depth (superficial or deep are factors that may influence the adhesion of these materials to the dentin structure. Specimens of two conventional glass-ionomer cements (Vidrion R® - SS White and Chelon Fil®- Espe and a hybrid-glass ionomer cement (Vitremer® - 3M were separated in groups and prepared for the shear bond strength test. The results submitted to statistical analysis were (all values are in MPa: Group I - Vidrion R - superficial dentin 1.97 (± 0.56; deep dentin 3.15 (± 1.51; Group II - Chelon Fil - superficial dentin 2.43 (± 1.43; deep dentin 3.21 (± 0.89; and Group III - Vitremer - superficial dentin 7.04 (± 2.04; deep dentin 10.30 (± 1.99. There were significant differences between dentin depth and type of materialsA proposta deste trabalho foi determinar, através da resistência ao cisalhamento em testes in vitro, se o tipo de cimento de ionômero de vidro, convencional ou híbrido, e a profundidade de dentina, superficial ou profunda, são fatores que influenciam a adesão desses materiais na estrutura dentinária. Espécimes de dois cimentos convencionais (Vidrion R® - SSWhite e Chelon Fil®- Espe e um cimento de ionômero de vidro híbrido (Vitremer®- 3M foram divididos em grupos. Os resultados (todos os valores em MPa submetidos à análise estatística foram: Grupo I - Vidrion R - dentina superficial, 1,97 (± 0,56; dentina profunda, 3,15 (± 1,51; Grupo II - Chelon Fil - dentina superficial, 2,43 (± 1,43; dentina profunda, 3,21 (± 0,89; e Grupo III - Vitremer - dentina superficial, 7,04 (± 2,04; dentina profunda, 10,30(± 1,99. Houve diferenças significantes entre a profundidade de dentina e o tipo de ativação do material

  18. Simplicial band depth for multivariate functional data

    KAUST Repository

    López-Pintado, Sara

    2014-03-05

    We propose notions of simplicial band depth for multivariate functional data that extend the univariate functional band depth. The proposed simplicial band depths provide simple and natural criteria to measure the centrality of a trajectory within a sample of curves. Based on these depths, a sample of multivariate curves can be ordered from the center outward and order statistics can be defined. Properties of the proposed depths, such as invariance and consistency, can be established. A simulation study shows the robustness of this new definition of depth and the advantages of using a multivariate depth versus the marginal depths for detecting outliers. Real data examples from growth curves and signature data are used to illustrate the performance and usefulness of the proposed depths. © 2014 Springer-Verlag Berlin Heidelberg.

  19. Earthquake damage to underground facilities

    International Nuclear Information System (INIS)

    Pratt, H.R.; Stephenson, D.E.; Zandt, G.; Bouchon, M.; Hustrulid, W.A.

    1980-01-01

    In order to assess the seismic risk for an underground facility, a data base was established and analyzed to evaluate the potential for seismic disturbance. Substantial damage to underground facilities is usually the result of displacements primarily along pre-existing faults and fractures, or at the surface entrance to these facilities. Evidence of this comes from both earthquakes and large explosions. Therefore, the displacement due to earthquakes as a function of depth is important in the evaluation of the hazard to underground facilities. To evaluate potential displacements due to seismic effects of block motions along pre-existing or induced fractures, the displacement fields surrounding two types of faults were investigated. Analytical models were used to determine relative displacements of shafts and near-surface displacement of large rock masses. Numerical methods were used to determine the displacement fields associated with pure strike-slip and vertical normal faults. Results are presented as displacements for various fault lengths as a function of depth and distance. This provides input to determine potential displacements in terms of depth and distance for underground facilities, important for assessing potential sites and design parameters

  20. Development of a dilatant damage zone along a thrust relay in a low-porosity quartz arenite

    Science.gov (United States)

    Cook, Jennie E.; Dunne, William M.; Onasch, Charles M.

    2006-05-01

    A damage zone along a backthrust fault system in well-cemented quartz arenite in the Alleghanian foreland thrust system consists of a network of NW-dipping thrusts that are linked by multiple higher-order faults and bound a zone of intense extensional fractures and breccias. The damage zone developed at an extensional step-over between two independent, laterally propagating backthrusts. The zone is unusual because it preserves porous brittle fabrics despite formation at >5 km depth. The presence of pervasive, late-stage fault-normal joints in a fault-bounded horse in the northwestern damage zone indicates formation between two near-frictionless faults. This decrease in frictional resistance was likely a result of increased fluid pressure. In addition to physical effects, chemical effects of fluid also influenced damage zone development. Quartz cements, fluid inclusion data, and Fourier Transform Infrared analysis indicate that both aqueous and methane-rich fluids were present within the damage zone at different times. The backthrust network likely acted as a fluid conduit system, bringing methane-rich fluids up from the underlying unit and displacing resident aqueous fluids. The presence of methane not only enhanced the effects of fluid pressure, which facilitated brittle fracturing, but inhibited formation of later-stage quartz cements, thereby preserving open fractures and porous breccias.

  1. Flat Surface Damage Detection System (FSDDS)

    Science.gov (United States)

    Williams, Martha; Lewis, Mark; Gibson, Tracy; Lane, John; Medelius, Pedro; Snyder, Sarah; Ciarlariello, Dan; Parks, Steve; Carrejo, Danny; Rojdev, Kristina

    2013-01-01

    The Flat Surface Damage Detection system (FSDDS} is a sensory system that is capable of detecting impact damages to surfaces utilizing a novel sensor system. This system will provide the ability to monitor the integrity of an inflatable habitat during in situ system health monitoring. The system consists of three main custom designed subsystems: the multi-layer sensing panel, the embedded monitoring system, and the graphical user interface (GUI). The GUI LABVIEW software uses a custom developed damage detection algorithm to determine the damage location based on the sequence of broken sensing lines. It estimates the damage size, the maximum depth, and plots the damage location on a graph. Successfully demonstrated as a stand alone technology during 2011 D-RATS. Software modification also allowed for communication with HDU avionics crew display which was demonstrated remotely (KSC to JSC} during 2012 integration testing. Integrated FSDDS system and stand alone multi-panel systems were demonstrated remotely and at JSC, Mission Operations Test using Space Network Research Federation (SNRF} network in 2012. FY13, FSDDS multi-panel integration with JSC and SNRF network Technology can allow for integration with other complementary damage detection systems.

  2. Improving Flood Damage Assessment Models in Italy

    Science.gov (United States)

    Amadio, M.; Mysiak, J.; Carrera, L.; Koks, E.

    2015-12-01

    The use of Stage-Damage Curve (SDC) models is prevalent in ex-ante assessments of flood risk. To assess the potential damage of a flood event, SDCs describe a relation between water depth and the associated potential economic damage over land use. This relation is normally developed and calibrated through site-specific analysis based on ex-post damage observations. In some cases (e.g. Italy) SDCs are transferred from other countries, undermining the accuracy and reliability of simulation results. Against this background, we developed a refined SDC model for Northern Italy, underpinned by damage compensation records from a recent flood event. Our analysis considers both damage to physical assets and production losses from business interruptions. While the first is calculated based on land use information, production losses are measured through the spatial distribution of Gross Value Added (GVA). An additional component of the model assesses crop-specific agricultural losses as a function of flood seasonality. Our results show an overestimation of asset damage from non-calibrated SDC values up to a factor of 4.5 for tested land use categories. Furthermore, we estimate that production losses amount to around 6 per cent of the annual GVA. Also, maximum yield losses are less than a half of the amount predicted by the standard SDC methods.

  3. Fiber quality of upland cotton under different irrigation depths

    Directory of Open Access Journals (Sweden)

    Francisco P. Cordão Sobrinho

    2015-11-01

    Full Text Available ABSTRACTAiming to evaluate the effect of irrigation depths on fiber quality of upland cotton, an experiment was conducted from July to December 2010 in Barbalha-CE, Brazil. The treatments consisted of a factorial combination of two upland cotton cultivars (BRS Aroeira and BRS Araripe and five irrigation depths (260.93, 418.93, 514.21, 711.81 and 894.68 mm, arranged in a split-plot design with four replicates. A line-source sprinkler irrigation system was used and irrigation depth in the control treatment was calculated according to the crop evapotranspiration. The analysed fiber quality variables were: fiber percentage, length, uniformity, short-fiber index, resistance, elongation at rupture, micronaire index, maturity, degree of yellowing, reflectance degree and count strength product (CSP index. The irrigation depths influenced fiber length, short-fiber index, strength, micronaire index, maturity and reflectance degree. The cultivars influenced fiber percentage, length and color (degree of yellowing. The best results of fiber quality were found with irrigation depths of 514.21 and 418.93 mm for the upland cotton cultivars BRS Araripe and BRS Aroeira, respectively.

  4. Amorphous layer depth dependence on implant parameters during Si self-implantation

    International Nuclear Information System (INIS)

    Lopez, Pedro; Pelaz, Lourdes; Marques, Luis A.; Barbolla, Juan; Gossmann, H.-J.L.; Agarwal, Aditya; Kimura, Kenji; Matsushita, Tomoyoshi

    2005-01-01

    Preamorphization followed by low temperature solid phase epitaxial regrowth has been proved to provide a high activation of the dopants with minimal diffusion. However, the end of range damage present after regrowth beyond the initial amorphous/crystalline interface causes diffusion and deactivation of dopants during subsequent annealing. In this paper, we study the influence of implant conditions on the depth of the amorphous layer during Si self-implantation. We compare experimental data with our simulation results obtained using an atomistic amorphization-recrystallization model recently developed. We show that the amorphous/crystalline interface depth initially increases with dose but saturates at high doses. Beam current and wafer temperature also alter the depth of the amorphous layer and the amount of residual damage by affecting the dynamic annealing of the damage. These parameters are not always well controlled or specified in experiments and can explain differences observed in dopant profiles

  5. Nanosecond laser damage investigations in nonlinear crystals

    International Nuclear Information System (INIS)

    Hildenbrand, A.

    2008-11-01

    Lasers become more and more powerful and compact. This raises laser induced damage issues in optical components, especially in nonlinear crystals. This thesis deals with nanosecond laser damage investigations in nonlinear crystals used for frequency conversion (KTP, KDP, LBO) and electro-optic applications (RTP, KDP). First, due to nonlinear and anisotropic effects of the crystals, the development of a metrology dedicated to laser damage studies of crystals was necessary. This metrology was then applied to the study of KTP and RTP isomorphous crystals, and LBO crystals. The influence of many parameters on the laser damage resistance, such as wavelength, polarization and crystal orientation, was studied allowing a better understanding of the laser damage phenomena in these crystals. Moreover, laser induced damage characterization was realized on these crystals with a high number of shots and in the real operating conditions, showing that the laser damage threshold of the component depends on its use. For example, the coexistence of multiple wavelengths inside the crystal takes a great part in the damage phenomena. (author)

  6. Frost damage of concrete subject to confinement

    DEFF Research Database (Denmark)

    Hasholt, Marianne Tange

    2016-01-01

    When internal frost damage is observed in real concrete structures, the usual pattern is cracks with a preferred orientation parallel to the exposed surface. When exposing concrete with poor frost resistance to a standardised freeze/thaw test in the laboratory, the orientations of the resulting...

  7. EOP TDRs (Temperature-Depth-Recordings) Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Temperature-depth-recorders (TDRs) were attached to commercial longline and research Cobb trawl gear to obtain absolute depth and temperature measurement during...

  8. Visual Discomfort and Depth-of-Field

    Directory of Open Access Journals (Sweden)

    Louise O'Hare

    2013-05-01

    Full Text Available Visual discomfort has been reported for certain visual stimuli and under particular viewing conditions, such as stereoscopic viewing. In stereoscopic viewing, visual discomfort can be caused by a conflict between accommodation and convergence cues that may specify different distances in depth. Earlier research has shown that depth-of-field, which is the distance range in depth in the scene that is perceived to be sharp, influences both the perception of egocentric distance to the focal plane, and the distance range in depth between objects in the scene. Because depth-of-field may also be in conflict with convergence and the accommodative state of the eyes, we raised the question of whether depth-of-field affects discomfort when viewing stereoscopic photographs. The first experiment assessed whether discomfort increases when depth-of-field is in conflict with coherent accommodation–convergence cues to distance in depth. The second experiment assessed whether depth-of-field influences discomfort from a pre-existing accommodation–convergence conflict. Results showed no effect of depth-of-field on visual discomfort. These results suggest therefore that depth-of-field can be used as a cue to depth without inducing discomfort in the viewer, even when cue conflicts are large.

  9. New principle of chemotherapy resistance

    Science.gov (United States)

    A laboratory study has revealed an entirely unexpected process for acquiring drug resistance that bypasses the need to re-establish DNA damage repair in breast cancers that have mutant BRCA1 or BRCA2 genes.

  10. Automated analysis of damages for radiation in plastics surfaces

    International Nuclear Information System (INIS)

    Andrade, C.; Camacho M, E.; Tavera, L.; Balcazar, M.

    1990-02-01

    Analysis of damages done by the radiation in a polymer characterized by optic properties of polished surfaces, of uniformity and chemical resistance that the acrylic; resistant until the 150 centigrade grades of temperature, and with an approximate weight of half of the glass. An objective of this work is the development of a method that analyze in automated form the superficial damages induced by radiation in plastic materials means an images analyst. (Author)

  11. Radiation damage in indium tin oxide (ITO) layers

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, D.V. [University Coll. of Wales, Cardiff (United Kingdom). School of Electric, Electronic and System Engineering; Salehi, A. [University Coll. of Wales, Cardiff (United Kingdom). School of Electric, Electronic and System Engineering; Aliyu, Y.H. [University Coll. of Wales, Cardiff (United Kingdom). School of Electric, Electronic and System Engineering; Bunce, R.W. [University Coll. of Wales, Cardiff (United Kingdom). School of Electric, Electronic and System Engineering; Diskett, D. [Applied Physics and Electro-optics Group, Cranfield University RMCS, Shrivenham, Swindon SN6 8LA (United Kingdom)

    1995-03-15

    The effects of proton damage on transparent conducting indium tin oxide (ITO) layers were investigated by electrical and optical techniques. ITO layers were found to be highly resistant to proton damage for fluences up to 10{sup 16} ions cm{sup -2}. For fluences greater than 10{sup 16} cm{sup -2} the resistivity rises rapidly with a corresponding degradation of the transmittance. ((orig.))

  12. Ultrasonic Measurement of Corrosion Depth Development in Concrete Exposed to Acidic Environment

    Directory of Open Access Journals (Sweden)

    Fan Yingfang

    2012-01-01

    Full Text Available Corrosion depth of concrete can reflect the damage state of the load-carrying capacity and durability of the concrete structures servicing in severe environment. Ultrasonic technology was studied to evaluate the corrosion depth quantitatively. Three acidic environments with the pH level of 3.5, 2.5, and 1.5 were simulated by the mixture of sulfate and nitric acid solutions in the laboratory. 354 prism specimens with the dimension of 150 mm × 150 mm × 300 mm were prepared. The prepared specimens were first immersed in the acidic mixture for certain periods, followed by physical, mechanical, computerized tomography (CT and ultrasonic test. Damage depths of the concrete specimen under different corrosion states were obtained from both CT and ultrasonic test. Based on the ultrasonic test, a bilinear regression model is proposed to estimate the corrosion depth. It is shown that the results achieved by ultrasonic and CT test are in good agreement with each other. Relation between the corrosion depth of concrete specimen and the mechanical indices such as mass loss, compressive strength, and elastic modulus is discussed in detail. It can be drawn that the ultrasonic test is a reliable nondestructive way to measure the damage depth of concrete exposed to acidic environment.

  13. Picosecond laser damage of fused silica at 355 nm

    International Nuclear Information System (INIS)

    Meng Xiangjie; Liu Hongjie; Wang Fang; Zhang Zhen; An Xinyou; Huang Jin; Jiang Xiaodong; Wu Weidong; Ren Weiyi

    2013-01-01

    This paper studies the initiated damage threshold, the damage morphology and the subsequent damage growth on fused silica's input-surface and exit-surface under picosecond laser irradiation at 355 nm. Defects induced fluorescence on surface of the optical component is observed. The results demonstrate a significant dependence of the initiated damage on pulse duration and surface defects, and that of the damage growth on self-focusing, sub-surface defects. The damage-threshold is 3.98 J/cm 2 of input surface and 2.91 J/cm 2 of exit surface. The damage morphologies are quite different between input surface and exit surface. Slow growth behavior appears for the diameter of exit-surface and linear growth one for the depth of exit-surface in the lateral side of damage site with the increase of shot number. Defects have changed obviously compared with nanosecond laser damage in the damage area. Several main reasons such as electric intensification and self-focusing for the observed initiated damage and damage growth behavior are discussed. (authors)

  14. MexCD-OprJ multidrug efflux system of Pseudomonas aeruginosa: involvement in chlorhexidine resistance and induction by membrane-damaging agents dependent upon the AlgU stress response sigma factor.

    Science.gov (United States)

    Fraud, Sebastien; Campigotto, Aaron J; Chen, Zhilin; Poole, Keith

    2008-12-01

    The biocide chlorhexidine (CHX) as well as additional membrane-active agents were shown to induce expression of the mexCD-oprJ multidrug efflux operon, dependent upon the AlgU stress response sigma factor. Hyperexpression of this efflux system in nfxB mutants was also substantially AlgU dependent. CHX resistance correlated with efflux gene expression in various mutants, consistent with MexCD-OprJ being a determinant of CHX resistance.

  15. Bayesian depth estimation from monocular natural images.

    Science.gov (United States)

    Su, Che-Chun; Cormack, Lawrence K; Bovik, Alan C

    2017-05-01

    Estimating an accurate and naturalistic dense depth map from a single monocular photographic image is a difficult problem. Nevertheless, human observers have little difficulty understanding the depth structure implied by photographs. Two-dimensional (2D) images of the real-world environment contain significant statistical information regarding the three-dimensional (3D) structure of the world that the vision system likely exploits to compute perceived depth, monocularly as well as binocularly. Toward understanding how this might be accomplished, we propose a Bayesian model of monocular depth computation that recovers detailed 3D scene structures by extracting reliable, robust, depth-sensitive statistical features from single natural images. These features are derived using well-accepted univariate natural scene statistics (NSS) models and recent bivariate/correlation NSS models that describe the relationships between 2D photographic images and their associated depth maps. This is accomplished by building a dictionary of canonical local depth patterns from which NSS features are extracted as prior information. The dictionary is used to create a multivariate Gaussian mixture (MGM) likelihood model that associates local image features with depth patterns. A simple Bayesian predictor is then used to form spatial depth estimates. The depth results produced by the model, despite its simplicity, correlate well with ground-truth depths measured by a current-generation terrestrial light detection and ranging (LIDAR) scanner. Such a strong form of statistical depth information could be used by the visual system when creating overall estimated depth maps incorporating stereopsis, accommodation, and other conditions. Indeed, even in isolation, the Bayesian predictor delivers depth estimates that are competitive with state-of-the-art "computer vision" methods that utilize highly engineered image features and sophisticated machine learning algorithms.

  16. A review on radiation damage of erythrocyte membranes

    International Nuclear Information System (INIS)

    Wang Junling; Wang Weidong; Qin Guangyong

    2007-01-01

    Biomembrane has very important biological function. Its damage will seriously disturb the directivity, the orderly nature and coordination of cell metabolism, and finally causes the cell death. This paper reviewed the effects of radiation damage on erythrocyte membrane in membrane composition, membrane function and oxidation resistance system. (authors)

  17. Laser Damage Inspection Final Report

    International Nuclear Information System (INIS)

    Salmon, J.T.; Brase, J.M.; Bliss, E.S.; Carrano, C.J.; Kegelmeyer, L.M.; Miller, M.G.; Orth, C.D.; Sacks, R.A.

    2001-01-01

    Large, high-power laser systems are often designed as reimaging multipass cavities to maximize the extraction of energy from the amplifiers. These multipass cavities often have vacuum spatial filters that suppress the growth of beam instability via B-integral effects. These spatial filters also relay images of laser damage, often nearly superimposing these images in common planes. Also, the fluence damage threshold limits the minimum size of the optics. When used as vacuum barriers in the spatial filters, these large optics present a safety hazard from the risk of implosion if the laser damage were sufficiently large. The objective of the project was to develop algorithms and methods for optical detection and characterization of laser-induced damage of optics. The system should detect small defects (about 5% of the critical size), track their growth over multiple laser shots, and characterize the defects accurately so that the optic can be replaced (at 25% of the critical size) and, hence, minimize the risk of implosion. The depth of field must be short enough to isolate the damaged vacuum barrier from other damaged optics in the beamline, and the system should also be capable of inspecting other optics in the beamline, since damage on one optic can subsequently damage subsequent optics. Laser induced damage starts as a small (<<1mm) crater and grows as material is removed on subsequent laser shots. The highly fractured rough surface of the crater scatters light from the illuminating inspection beam. This scattered light is imaged by the inspection system. Other types of defects may occur as well including inclusions in the bulk glass, tooling marks, and surface contamination. This report will discuss the detection and characterization of crater-like surface defects although the general techniques may prove useful for other types of defects. The work described here covers the development of an image processing approach and specific algorithms for defect detection

  18. Radiation damage in barium fluoride detector materials

    International Nuclear Information System (INIS)

    Levey, P.W.; Kierstead, J.A.; Woody, C.L.

    1988-01-01

    To develop radiation hard detectors, particularly for high energy physics studies, radiation damage is being studied in BaF 2 , both undoped and doped with La, Ce, Nd, Eu, Gd and Tm. Some dopants reduce radiation damage. In La doped BaF 2 they reduce the unwanted long lifetime luminescence which interferes with the short-lived fluorescence used to detect particles. Radiation induced coloring is being studied with facilities for making optical measurements before, during and after irradiation with 60 C0 gamma rays. Doses of 10 6 rad, or less, create only ionization induced charge transfer effects since lattice atom displacement damage is negligible at these doses. All crystals studied exhibit color center formation, between approximately 200 and 800 nm, during irradiation and color center decay after irradiation. Thus only measurements made during irradiation show the total absorption present in a radiation field. Both undoped and La doped BaF 2 develop damage at minimum detectable levels in the UV---which is important for particle detectors. For particle detector applications these studies must be extended to high dose irradiations with particles energetic enough to cause lattice atom displacement damage. In principle, the reduction in damage provided by dopants could apply to other applications requiring radiation damage resistant materials

  19. Heavy ion induced disorder introduction in the surface and at shallow depths in Si

    International Nuclear Information System (INIS)

    Roosendaal, H.E.; Weick, M.; Hubbes, H.H.; Lutz, H.O.

    1979-01-01

    Disorder in a Si lattice has been produced by bombardment with 220 and 290 keV C + , N + , Ne + and Ar + ions. The production of surface disorder is compared with the disorder production at shallow depths. For random incidence of the damaging projectiles, the surface disorder has been found to scale with the disorder at shallow depths (380 to 800 A). For channeling incidence, a Z 1 dependent reduction of the surface disorder is observed. This reduction is much smaller than that for the disorder in the depth interval 380 to 800 A. (author)

  20. Impact damage of composites

    Science.gov (United States)

    Wu, Hsi-Young T.; Springer, George S.

    1986-01-01

    A model is described for estimating the impact damage of fiber reinforced composite plates. The displacements and stresses are calculated by a three dimensional transient, finite element method of solution of the governing equations applicable to a linearly elastic body. The region in which damage occurs is estimated using the Tsai-Wu failure criterion. A computer code was developed which can be used to calculate the impact force, displacements and velocities of the plate and the impact body, stresses and strains in the plate, and the damage area. Sample numerical results are presented illustrating the type of information provided by the code. Comparisons between measured and calculated damage areas are also given.

  1. Maintenance and preservation of concrete structures. Report 2: Repair of erosion-damaged structures

    Science.gov (United States)

    McDonald, J. E.

    1980-04-01

    The primary objectives of the initial phase of this investigation were to (a) identify and evaluate various abrasion-erosion-resistant materials for repairing and improving the durability of concrete stilling basin slabs, (b) develop optimum techniques for repair and rehabilitation of stilling basins, and (c) develop guidance for designing stilling basin exit configurations to avoid entrapping abrasive materials within the basin. A survey of Corps Divisions and District offices identified 52 structures that have experienced concrete damage due to erosion. Depths of erosion ranged from a few inches to approximately 10 ft. In general, this erosion damage resulted from the abrasive effects of waterborne rocks and other debris being circulated over the concrete surface during construction and operation of the structure. A variety of materials including armored concrete, conventional concrete, epoxy resins, fiber-reinforced concrete, and polymer-impregnated concrete were used with varying degrees of success in the 31 repairs reported. The degree of success generally was inversely proportional to the degree of exposure to those conditions conducive to erosion damage. These materials have been used with various construction procedures, including dewatering and underwater repairs.

  2. Modelling the induction of cell death and chromosome damage by therapeutic protons

    CERN Document Server

    Carante, M P

    2015-01-01

    A two-parameter biophysical model cal led BIANCA (BIophysical ANalysis of Cell death and chromosome Aberrations), which assumes a pivotal role for DNA cluster damage and for “lethal” chromosome aberrations, was applied to calculate cell death and chromosome aberrations for normal and radio-resistant cells along a 62-MeV eye melanoma proton beam. The yield of DNA “Cluster Lesions” and the probability for a chromosome fragment of not being rejoined with any partne r were adjustable parameters. In line with other works, the beam effectiveness at inducing both biological endpoints was found to increase with increasing depth, and high levels of damage were found also beyond the dose fall-off, due to the higher biological effectiveness of low-energy protons. This implies that assuming a constant RBE along the whole SOBP, as is currently done in clinical practice, may be sub-optimal, also implying a possible underestimation of normal tissue damage. Furthermore, the calculations suggested that fo...

  3. Multi-Physics Modeling of Fire-Induced Damage in High-Performance Concrete

    Directory of Open Access Journals (Sweden)

    C Lammi

    2016-09-01

    Full Text Available The response of high-performance concrete (HPC to rapid heating due to exposure to fire with air temperatures exceeding 700°C is analyzed. The analysis focuses on coupled thermal-mechanical-transport processes at the mesoscale in the first 10 minutes of exposure during which heating rates on the order of 10 °C/minute and temperature gradients on the order of 15 °C/cm are involved. The driving forces for damage considered are thermomechanical stresses and internal pore pressure resulting from the expansion of water within the material. The HPC is modeled as a two-phase composite consisting of a cementitious matrix and a population of quartz aggregate particles. Mesostructures with aggregate sizes of 400-1600 μm and aggregate volume fractions of 10-30% are considered. To capture the development of stresses and pore pressure, the cementitious matrix is modeled using a coupled thermal-mechanical-transport formulation and the aggregate is modeled using a thermal-mechanical formulation. Simulations show that the composition of the mesostructures significantly influences the time and spatial distribution of damage. Materials with smaller aggregate sizes and the lower effective permeability are found to exhibit more rapid property degradation. The time to failure and depth of thermal spall are quantified as functions of structural variables. This framework and the mesostructure-response relations obtained serves as a tool for the design of HPC that are more resistant to fire-induced damage.

  4. Rapid and in-depth analysis for seismic risk evaluation

    Science.gov (United States)

    Dwi Astuti, Novi; Anta Alvita, Meli; Sangadji, Senot; Rahmadi, AP; Purwanto, Edy

    2017-11-01

    The high public demand on housing in urban areas requires the government of Indonesia to adopt a policy of encouraging the development of vertical housing. Cilacap has been allocated Rusunawa (low-income apartment) development in 2006. Evident from some earthquakes occurrence in recent years, however, Cilacap may be seen as an earthquake prone region which posing some risk to this type of vertical structures. The Appropriate strategy should be performed to evaluate the seismic risks of this local government owned four stories low-income apartment. This paper demonstrates two tier evaluation strategy; rapid evaluation and in-depth analysis and compares both results. First evaluation was conducted by means of Building Rapid Visual Screening (RVS) of FEMA 154 of the Rusunawa block A and B. The result was used further to calculate seismic risk score (SR) which exhibit the probability of the building damage given the Maximum Considered Earthquake (MCER) that will occur during the Rusunawa service life. The in-depth analysis was conducted by developing fragility function expressed in the form of fragility curves for the Rusunawa. The fragility shows the probability that certain damage states will be exceeded given the intensity of earthquakes which will occur during building service life. The fragility was developed as lognormal curves in which the building response to earthquake input was analyzed by means of pushover.

  5. Using Computed Tomography Scans and Patient Demographic Data to Estimate Thoracic Epidural Space Depth

    Directory of Open Access Journals (Sweden)

    Alyssa Kosturakis

    2015-01-01

    Full Text Available Background and Objectives. Previous studies have used varying methods to estimate the depth of the epidural space prior to placement of an epidural catheter. We aim to use computed tomography scans, patient demographics, and vertebral level to estimate the depth of the loss of resistance for placement of thoracic epidural catheters. Methods. The records of consecutive patients who received a thoracic epidural catheter were reviewed. Patient demographics, epidural placement site, and technique were collected. Preoperative computed tomography scans were reviewed to measure the skin to epidural space distance. Linear regression was used for a multivariate analysis. Results. The records of 218 patients were reviewed. The mean loss of resistance measurement was significantly larger than the mean computed tomography epidural space depth measurement by 0.79 cm (p<0.001. Our final multivariate model, adjusted for demographic and epidural technique, showed a positive correlation between the loss of resistance and the computed tomography epidural space depth measurement (R2=0.5692, p<0.0001. Conclusions. The measured loss of resistance is positively correlated with the computed tomography epidural space depth measurement and patient demographics. For patients undergoing thoracic or abdominal surgery, estimating the loss of resistance can be a valuable tool.

  6. Coding of Depth Images for 3DTV

    DEFF Research Database (Denmark)

    Zamarin, Marco; Forchhammer, Søren

    In this short paper a brief overview of the topic of coding and compression of depth images for multi-view image and video coding is provided. Depth images represent a convenient way to describe distances in the 3D scene, useful for 3D video processing purposes. Standard approaches...... for the compression of depth images are described and compared against some recent specialized algorithms able to achieve higher compression performances. Future research directions close the paper....

  7. ACCURACY ANALYSIS OF KINECT DEPTH DATA

    Directory of Open Access Journals (Sweden)

    K. Khoshelham

    2012-09-01

    Full Text Available This paper presents an investigation of the geometric quality of depth data obtained by the Kinect sensor. Based on the mathematical model of depth measurement by the sensor a theoretical error analysis is presented, which provides an insight into the factors influencing the accuracy of the data. Experimental results show that the random error of depth measurement increases with increasing distance to the sensor, and ranges from a few millimetres up to about 4 cm at the maximum range of the sensor. The accuracy of the data is also found to be influenced by the low resolution of the depth measurements.

  8. Directional Joint Bilateral Filter for Depth Images

    Directory of Open Access Journals (Sweden)

    Anh Vu Le

    2014-06-01

    Full Text Available Depth maps taken by the low cost Kinect sensor are often noisy and incomplete. Thus, post-processing for obtaining reliable depth maps is necessary for advanced image and video applications such as object recognition and multi-view rendering. In this paper, we propose adaptive directional filters that fill the holes and suppress the noise in depth maps. Specifically, novel filters whose window shapes are adaptively adjusted based on the edge direction of the color image are presented. Experimental results show that our method yields higher quality filtered depth maps than other existing methods, especially at the edge boundaries.

  9. Temporal and Spatial Denoising of Depth Maps

    Directory of Open Access Journals (Sweden)

    Bor-Shing Lin

    2015-07-01

    Full Text Available This work presents a procedure for refining depth maps acquired using RGB-D (depth cameras. With numerous new structured-light RGB-D cameras, acquiring high-resolution depth maps has become easy. However, there are problems such as undesired occlusion, inaccurate depth values, and temporal variation of pixel values when using these cameras. In this paper, a proposed method based on an exemplar-based inpainting method is proposed to remove artefacts in depth maps obtained using RGB-D cameras. Exemplar-based inpainting has been used to repair an object-removed image. The concept underlying this inpainting method is similar to that underlying the procedure for padding the occlusions in the depth data obtained using RGB-D cameras. Therefore, our proposed method enhances and modifies the inpainting method for application in and the refinement of RGB-D depth data image quality. For evaluating the experimental results of the proposed method, our proposed method was tested on the Tsukuba Stereo Dataset, which contains a 3D video with the ground truths of depth maps, occlusion maps, RGB images, the peak signal-to-noise ratio, and the computational time as the evaluation metrics. Moreover, a set of self-recorded RGB-D depth maps and their refined versions are presented to show the effectiveness of the proposed method.

  10. Correlation between changes in mechanical strength and damping of a high alumina refractory castable progressively damaged by thermal shock Correlação entre alterações na resistência mecânica e no amortecimento de um concreto refratário de alta alumina com dano progressivo por choque térmico

    Directory of Open Access Journals (Sweden)

    A. H. A. Pereira

    2010-07-01

    Full Text Available Resistance to thermal shock damage is an important characteristic in refractory materials, since it determines their performance and service life in many applications. Therefore, the use of more sensitive techniques is desirable to improve the evaluation of thermal shock damage and monitoring of nucleation and propagation cracks and microcracks.The aim of this work was to evaluate the potential of damping change characterization to quantify thermal shock damage and to estimate the retained mechanical strength in complement to the dynamic Young's modulus test. Variations in damping and retained Young's modulus and their correlation with the mechanical strength of a high alumina refractory castable were evaluated at different thermal shock temperatures and number of cycles. The changes in damping were proportional to the retained mechanical strength, similarly to the retained Young's modulus. Changes in damping were also detected which were not indicated by the Young's modulus measurements.A resistência ao dano por choque térmico é uma característica importante dos materiais refratários visto que determina o desempenho e vida útil destes materiais em várias aplicações. Portanto é desejável a aplicação de técnicas mais sensíveis para avaliação do dano por choque térmico e monitoração da nucleação e expansão de trincas e microtrincas. O objetivo deste trabalho foi avaliar o potencial da caracterização da variação do amortecimento para quantificar o dano por choque térmico e para estimar o módulo de ruptura retido, complementarmente à caracterização do módulo de Young dinâmico. Foram estudadas as variações do amortecimento, do módulo de Young retido e a correlação destas variações com a resistência mecânica de um concreto refratário de alta alumina para distintas variações de temperatura e número de ciclos. As alterações encontradas no amortecimento foram proporcionais à resistência mecânica retida

  11. Cascade damage in nickel: Production, saturation and recovery

    International Nuclear Information System (INIS)

    Birtcher, R.C.; Blewitt, T.H.

    1988-01-01

    Changes in the electrical resistivity and length were simultaneously measured during the bombardment of nickel at 70 K with 235 U fission fragments and during a subsequent isothermal annealing program. The resistivity changes and length changes were linearly related during the damage production for damage concentrations less 80% of the defect saturation limit. The initial ratio of the length change to the resistivity change was 8.4x10 4 /Ω m. At high damage concentrations, the length change increased at a slightly higher rate than the resistivity change. During isothermal annealing of the near-saturation defect concentration, the resistivity and the length changes had identical recoveries through stage I and most of stage II. During stage III annealing, the ratio of the length change to the resistivity change showed a small increase. At temperatures above 475 K, this ratio showed a marked increase as the resistivity change exhibited recovery without a corresponding recovery of the length change. These differences, which are attributed to the direct formation and growth of three-dimensional vacancy agglomerates, and results of tranmission electron microscopy suggest that the sign of the third derivative of the resistivity with respect to fast-neutron fluence (the sense of curvature in the damage rate) is positive for materials in which cascades collapse to loops, and negative for materials in which three-dimensional vacancy agglomerates are stable. (orig.)

  12. Damage Theory Validation

    DEFF Research Database (Denmark)

    Simonsen, Bo Cerup

    1998-01-01

    This report contains a series of validation examples for the theoretical model implemented in the computer program DAMAGE. note that the validation examples are for assembled structures.......This report contains a series of validation examples for the theoretical model implemented in the computer program DAMAGE. note that the validation examples are for assembled structures....

  13. DNA damage and autophagy

    International Nuclear Information System (INIS)

    Rodriguez-Rocha, Humberto; Garcia-Garcia, Aracely; Panayiotidis, Mihalis I.; Franco, Rodrigo

    2011-01-01

    Both exogenous and endogenous agents are a threat to DNA integrity. Exogenous environmental agents such as ultraviolet (UV) and ionizing radiation, genotoxic chemicals and endogenous byproducts of metabolism including reactive oxygen species can cause alterations in DNA structure (DNA damage). Unrepaired DNA damage has been linked to a variety of human disorders including cancer and neurodegenerative disease. Thus, efficient mechanisms to detect DNA lesions, signal their presence and promote their repair have been evolved in cells. If DNA is effectively repaired, DNA damage response is inactivated and normal cell functioning resumes. In contrast, when DNA lesions cannot be removed, chronic DNA damage triggers specific cell responses such as cell death and senescence. Recently, DNA damage has been shown to induce autophagy, a cellular catabolic process that maintains a balance between synthesis, degradation, and recycling of cellular components. But the exact mechanisms by which DNA damage triggers autophagy are unclear. More importantly, the role of autophagy in the DNA damage response and cellular fate is unknown. In this review we analyze evidence that supports a role for autophagy as an integral part of the DNA damage response.

  14. Animal damage management handbook.

    Science.gov (United States)

    Hugh C. Black

    1994-01-01

    This handbook treats animal damage management (ADM) in the West in relation to forest, range, and recreation resources; predator management is not addressed. It provides a comprehensive reference of safe, effective, and practical methods for managing animal damage on National Forest System lands. Supporting information is included in references after each chapter and...

  15. Animal damage to birch

    Science.gov (United States)

    James S. Jordan; Francis M. Rushmore

    1969-01-01

    A relatively few animal species are responsible for most of the reported damage to the birches. White-tailed deer, yellow-bellied sapsuckers, porcupines, moose, and hares are the major animals involved. We will review reports of damage, discuss the underlying causes, and describe possible methods of control. For example, heavy deer browsing that eliminates birch...

  16. Nuclear damage - civil liability

    International Nuclear Information System (INIS)

    Simoes, A.C.

    1980-01-01

    An analysis is made of the civil liability for nuclear damage since there is a need to adjust the existing rules to the new situations created. The conventions that set up the new disciplining rules not considered in the common law for the liability of nuclear damage are also mentioned. (A.L.) [pt

  17. A Progressive Damage Model for Predicting Permanent Indentation and Impact Damage in Composite Laminates

    Science.gov (United States)

    Ji, Zhaojie; Guan, Zhidong; Li, Zengshan

    2017-10-01

    In this paper, a progressive damage model was established on the basis of ABAQUS software for predicting permanent indentation and impact damage in composite laminates. Intralaminar and interlaminar damage was modelled based on the continuum damage mechanics (CDM) in the finite element model. For the verification of the model, low-velocity impact tests of quasi-isotropic laminates with material system of T300/5228A were conducted. Permanent indentation and impact damage of the laminates were simulated and the numerical results agree well with the experiments. It can be concluded that an obvious knee point can be identified on the curve of the indentation depth versus impact energy. Matrix cracking and delamination develops rapidly with the increasing impact energy, while considerable amount of fiber breakage only occurs when the impact energy exceeds the energy corresponding to the knee point. Predicted indentation depth after the knee point is very sensitive to the parameter μ which is proposed in this paper, and the acceptable value of this parameter is in range from 0.9 to 1.0.

  18. Radiation damage to nucleoprotein complexes in macromolecular crystallography

    International Nuclear Information System (INIS)

    Bury, Charles; Garman, Elspeth F.; Ginn, Helen Mary; Ravelli, Raimond B. G.; Carmichael, Ian; Kneale, Geoff; McGeehan, John E.

    2015-01-01

    Quantitative X-ray induced radiation damage studies employing a model protein–DNA complex revealed a striking partition of damage sites. The DNA component was observed to be far more resistant to specific damage compared with the protein. Significant progress has been made in macromolecular crystallography over recent years in both the understanding and mitigation of X-ray induced radiation damage when collecting diffraction data from crystalline proteins. In contrast, despite the large field that is productively engaged in the study of radiation chemistry of nucleic acids, particularly of DNA, there are currently very few X-ray crystallographic studies on radiation damage mechanisms in nucleic acids. Quantitative comparison of damage to protein and DNA crystals separately is challenging, but many of the issues are circumvented by studying pre-formed biological nucleoprotein complexes where direct comparison of each component can be made under the same controlled conditions. Here a model protein–DNA complex C.Esp1396I is employed to investigate specific damage mechanisms for protein and DNA in a biologically relevant complex over a large dose range (2.07–44.63 MGy). In order to allow a quantitative analysis of radiation damage sites from a complex series of macromolecular diffraction data, a computational method has been developed that is generally applicable to the field. Typical specific damage was observed for both the protein on particular amino acids and for the DNA on, for example, the cleavage of base-sugar N 1 —C and sugar-phosphate C—O bonds. Strikingly the DNA component was determined to be far more resistant to specific damage than the protein for the investigated dose range. At low doses the protein was observed to be susceptible to radiation damage while the DNA was far more resistant, damage only being observed at significantly higher doses

  19. Metabolite Damage and Metabolite Damage Control in Plants

    Energy Technology Data Exchange (ETDEWEB)

    Hanson, Andrew D. [Horticultural Sciences Department and; Henry, Christopher S. [Mathematics and Computer Science Division, Argonne National Laboratory, Argonne, Illinois 60439, email:; Computation Institute, University of Chicago, Chicago, Illinois 60637; Fiehn, Oliver [Genome Center, University of California, Davis, California 95616, email:; de Crécy-Lagard, Valérie [Microbiology and Cell Science Department, University of Florida, Gainesville, Florida 32611, email: ,

    2016-04-29

    It is increasingly clear that (a) many metabolites undergo spontaneous or enzyme-catalyzed side reactions in vivo, (b) the damaged metabolites formed by these reactions can be harmful, and (c) organisms have biochemical systems that limit the buildup of damaged metabolites. These damage-control systems either return a damaged molecule to its pristine state (metabolite repair) or convert harmful molecules to harmless ones (damage preemption). Because all organisms share a core set of metabolites that suffer the same chemical and enzymatic damage reactions, certain damage-control systems are widely conserved across the kingdoms of life. Relatively few damage reactions and damage-control systems are well known. Uncovering new damage reactions and identifying the corresponding damaged metabolites, damage-control genes, and enzymes demands a coordinated mix of chemistry, metabolomics, cheminformatics, biochemistry, and comparative genomics. This review illustrates the above points using examples from plants, which are at least as prone to metabolite damage as other organisms.

  20. Effect of acupuncture depth on muscle pain

    Directory of Open Access Journals (Sweden)

    Kitakoji Hiroshi

    2011-06-01

    Full Text Available Abstract Background While evidence supports efficacy of acupuncture and/or dry needling in treating musculoskeletal pain, it is unclear which needling method is most effective. This study aims to determine the effects of depth of needle penetration on muscle pain. Methods A total of 22 healthy volunteers performed repeated eccentric contractions to induce muscle soreness in their extensor digital muscle. Subjects were assigned randomly to four groups, namely control group, skin group (depth of 3 mm: the extensor digital muscle, muscle group (depth of 10 mm: the extensor digital muscle and non-segmental group (depth of 10 mm: the anterior tibial muscle. Pressure pain threshold and electrical pain threshold of the skin, fascia and muscle were measured at a point 20 mm distal to the maximum tender point on the second day after the exercise. Results Pressure pain thresholds of skin group (depth of 3 mm: the extensor digital muscle and muscle group (depth of 10 mm: the extensor digital muscle were significantly higher than the control group, whereas the electrical pain threshold at fascia of muscle group (depth of 10 mm: the extensor digital muscle was a significantly higher than control group; however, there was no significant difference between the control and other groups. Conclusion The present study shows that acupuncture stimulation of muscle increases the PPT and EPT of fascia. The depth of needle penetration is important for the relief of muscle pain.

  1. Improving depth maps with limited user input

    Science.gov (United States)

    Vandewalle, Patrick; Klein Gunnewiek, René; Varekamp, Chris

    2010-02-01

    A vastly growing number of productions from the entertainment industry are aiming at 3D movie theaters. These productions use a two-view format, primarily intended for eye-wear assisted viewing in a well defined environment. To get this 3D content into the home environment, where a large variety of 3D viewing conditions exists (e.g. different display sizes, display types, viewing distances), we need a flexible 3D format that can adjust the depth effect. This can be provided by the image plus depth format, in which a video frame is enriched with depth information for all pixels in the video frame. This format can be extended with additional layers, such as an occlusion layer or a transparency layer. The occlusion layer contains information on the data that is behind objects, and is also referred to as occluded video. The transparency layer, on the other hand, contains information on the opacity of the foreground layer. This allows rendering of semi-transparencies such as haze, smoke, windows, etc., as well as transitions from foreground to background. These additional layers are only beneficial if the quality of the depth information is high. High quality depth information can currently only be achieved with user assistance. In this paper, we discuss an interactive method for depth map enhancement that allows adjustments during the propagation over time. Furthermore, we will elaborate on the automatic generation of the transparency layer, using the depth maps generated with an interactive depth map generation tool.

  2. Revealing trap depth distributions in persistent phosphors

    NARCIS (Netherlands)

    Van den Eeckhout, K.; Bos, A.J.J.; Poelman, D.; Smet, P.F.

    2013-01-01

    Persistent luminescence or afterglow is caused by a gradual release of charge carriers from trapping centers. The energy needed to release these charge carriers is determined by the trap depths. Knowledge of these trap depths is therefore crucial in the understanding of the persistent luminescence

  3. Electron beam damage in high temperature polymers

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, S. (Dayton Univ., OH (USA). Research Inst.); Adams, W.W. (Air Force Materials Lab., Wright-Patterson AFB, OH (USA))

    1990-01-01

    Electron microscopic studies of polymers are limited due to beam damage. Two concerns are the damage mechanism in a particular material, and the maximum dose for a material before damage effects are observed. From the knowledge of the dose required for damage to the polymer structure, optimum parameters for electron microscopy imaging can be determined. In the present study, electron beam damage of polymers has been quantified by monitoring changes in the diffraction intensity as a function of electron dose. The beam damage characteristics of the following polymers were studied: poly(p-phenylene benzobisthiazole) (PBZT); poly(p-phenylene benzobisoxazole) (PBO); poly(benzoxazole) (ABPBO); poly(benzimidazole) (ABPBI); poly(p-phenylene terephthalamide) (PPTA); and poly(aryl ether ether ketone) (PEEK). Previously published literature results on polyethylene (PE), polyoxymethylene (POM), nylon-6, poly(ethylene oxide) (PEO), PBZT, PPTA, PPX, iPS, poly(butylene terephthalate) (PBT), and poly(phenylene sulphide) (PPS) were reviewed. This study demonstrates the strong dependence of the electron beam resistivity of a polymer on its thermal stability/melt temperature. (author).

  4. Bottom Raking Damage to High-Speed Craft

    DEFF Research Database (Denmark)

    Simonsen, Bo Cerup

    1998-01-01

    certain similarities. Thus, damage statistics for one ship type can be scaled to another ship type.The result of a raking damage calculation is sensitive to various uncertain parameters, such as the impact velocity and the rock height and shape. Conveniently, the paper shows that the damage scaling factor......This paper presents a comparative study of the raking damage to high speed craft (HSC) and conventional ships. The analysis is based on a detailed theoretical model for the raking resistance of an assembled ship bottom structure and on the idea that the impact conditions for various ship types have...

  5. Foam-on-Tile Damage Model

    Science.gov (United States)

    Koharchik, Michael; Murphy, Lindsay; Parker, Paul

    2012-01-01

    An impact model was developed to predict how three specific foam types would damage the Space Shuttle Orbiter insulating tiles. The inputs needed for the model are the foam type, the foam mass, the foam impact velocity, the foam impact incident angle, the type being impacted, and whether the tile is new or aged (has flown at least one mission). The model will determine if the foam impact will cause damage to the tile. If it can cause damage, the model will output the damage cavity dimensions (length, depth, entry angle, exit angle, and sidewall angles). It makes the calculations as soon as the inputs are entered (less than 1 second). The model allows for the rapid calculation of numerous scenarios in a short time. The model was developed from engineering principles coupled with significant impact testing (over 800 foam impact tests). This model is applicable to masses ranging from 0.0002 up to 0.4 pound (0.09 up to 181 g). A prior tool performed a similar function, but was limited to the assessment of a small range of masses and did not have the large test database for verification. In addition, the prior model did not provide outputs of the cavity damage length, entry angle, exit angle, or sidewall angles.

  6. Note on Strain Release Variation with Depth

    Directory of Open Access Journals (Sweden)

    A. G. GALANOPOULOS

    1964-06-01

    Full Text Available In the present paper an attempt is made to approach
    the problem of the upper mantle structure by studying the strain relea.se
    variation with depth. If the method and data used in this paper are adequate,
    we may be allowed to say that although there is no strain release
    evidence for the depth of the upper boundary of the asthenospliere zone on
    account of lack of adequate accuracy in the determination of focal depths,
    nevertheless there is ample indication of a discontinuity at about 125 km
    depth. The abrupt change in the rate of decrease in the strain release
    with depth near this level clearly indicates that a sudden decrease in the
    yield strength of the material in the earth should occur at about this depth.
    I t might even be possible to think that the melting point of some kind of
    crystal grains or rocks in the earth is attained at that depth. However,
    this does not involve a completely molten state. This state should rather
    occur at depths where there is a complete lack of strain release. Regionally
    this state is attained at different depths, but in some regions the partially
    molten state, i. e. the heterogeneity of the mantle, probably recurs or increases
    due to the pressure increase or some other reason and reaches a minor
    maximum beyond which it might be possible to speculate that the heterogeneity
    of the mantle falls off rapidly and a continuous layer of material
    in molten state covers the whole earth. If data from other sources will
    confirm this structure, there will be good reasons to think of redefining
    the upper boundaries of surface and intermediate shocks at depths of 125
    and 425 km or thereabouts, respectively.

  7. Radiation damage in silicon detectors

    CERN Document Server

    Bruzzi, Mara

    2000-01-01

    This work presents an overview of the most important mechanisms of radiation damage in silicon detectors to be used for high energy experiments in LHC. The changes in the shallow concentration have been studied by Thermally Stimulated Currents (TSC) after proton and neutron irradiation with fluences up to 1015 cm-2 to investigate the role of thermal donors and the donor-removal effect in standard and oxygen enriched silicon with different resistivities. Deep defects in irradiated silicon have been analysed by Deep Level Transient Spectroscopy (DLTS) and Photo Induced Current Transient Spectroscopy (P1CTS) in the same materials. The radiation-induced microscopic disorder has been related with the carrier transport properties of irradiated silicon measured by Hall effect, by capacitance and current vs. voltage characteristics and with charge collection efficiency. The dependence of the irradiated silicon detectors performances on crystal orientation, on incident particle type and on the starting concentration o...

  8. Annual Thaw Depths and Water Depths in Tanana Flats, Alaska, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — Thaw depths and water depths were monitored at 1 m to 2 m intervals along a 255-m transect across an area of discontinuous and degrading permafrost on the Tanana...

  9. Bactericidal catechins damage the lipid bilayer.

    Science.gov (United States)

    Ikigai, H; Nakae, T; Hara, Y; Shimamura, T

    1993-04-08

    The mode of antibacterial action of, the green tea (Camellia sinensis) extracts, (-)-epigallocatechin gallate (EGCg) and (-)-epicatechin (EC) was investigated. Strong bactericidal EGCg caused leakage of 5,6-carboxyfluorescein from phosphatidylcholine liposomes (PC), but EC with very weak bactericidal activity caused little damage to the membrane. Phosphatidylserine and dicetyl phosphate partially protected the membrane from EGCg-mediated damage when reconstituted into the liposome membrane with PC. EGCg, but not EC, caused strong aggregation and NPN-fluorescence quenching of PC-liposomes and these actions were markedly lowered in the presence of negatively charged lipids. These results show that bactericidal catechins primarily act on and damage bacterial membranes. The observation that Gram-negative bacteria are more resistant to bactericidal catechins than Gram-positive bacteria can be explained to some extent by the presence of negatively charged lipopolysaccharide.

  10. Diabetes and nerve damage

    Science.gov (United States)

    Diabetic neuropathy; Diabetes - neuropathy; Diabetes - peripheral neuropathy ... In people with diabetes, the body's nerves can be damaged by decreased blood flow and a high blood sugar level. This condition is ...

  11. Continuous damage mechanics

    International Nuclear Information System (INIS)

    Chaboche, J.L.

    1981-01-01

    The classical structural life predictions are based on stabilized stress-strain analysis and some parametric relations with the number of cycles to failure. During the last ten years a different approach, initiated by the works of Kachanov and Rabotnov for creep rupture, has been developed by different laboratories. This continuous Damage Mechanics, treating the damaged material as a macroscopically homogeneous one, leads to the possibility of globally modelling the nucleation and the propagation of microdefects including their effect on the stress-strain behaviour. This paper presents the general theory and several applications to a turbine blade refractory alloy. It includes the description of sequence effects and creep-fatigue interaction. The generalization for three-dimensional conditions, where anisotropic damage effects are possible, is discussed and some new proposals are given for the determination of simple anisotropic damage equations. (orig.)

  12. LSD and Genetic Damage

    Science.gov (United States)

    Dishotsky, Norman I.; And Others

    1971-01-01

    Reviews studies of the effects of lysergic acid diethylamide (LSD) on man and other organisms. Concludes that pure LSD injected in moderate doses does not cause chromosome or detectable genetic damage and is not a teratogen or carcinogen. (JM)

  13. Animal Models of Ionizing Radiation Damage

    Science.gov (United States)

    1992-01-01

    irradiated vessels of various tissues (54). Severely damaged blood vessels, those with thrombosis or occlusion, can produce marked changes in tissues...X-irradiation of the Rat, Radiat. Res., 20:471-476, 1963. 153. Persinger, M.A., and T.B. Fiss, Mesenteric Mast Cell Degranulation is not Essential... Thrombosis of the Heart Induced by Radiation, Arch. Path., 96:1-4, 1973. 8. Bruner, A., Immediate Changes in Estimated Cardiac Output and Vascular Resistance

  14. Hydrologic regulation of plant rooting depth

    Science.gov (United States)

    Fan, Ying; Miguez-Macho, Gonzalo; Jobbágy, Esteban G.; Jackson, Robert B.; Otero-Casal, Carlos

    2017-10-01

    Plant rooting depth affects ecosystem resilience to environmental stress such as drought. Deep roots connect deep soil/groundwater to the atmosphere, thus influencing the hydrologic cycle and climate. Deep roots enhance bedrock weathering, thus regulating the long-term carbon cycle. However, we know little about how deep roots go and why. Here, we present a global synthesis of 2,200 root observations of >1,000 species along biotic (life form, genus) and abiotic (precipitation, soil, drainage) gradients. Results reveal strong sensitivities of rooting depth to local soil water profiles determined by precipitation infiltration depth from the top (reflecting climate and soil), and groundwater table depth from below (reflecting topography-driven land drainage). In well-drained uplands, rooting depth follows infiltration depth; in waterlogged lowlands, roots stay shallow, avoiding oxygen stress below the water table; in between, high productivity and drought can send roots many meters down to the groundwater capillary fringe. This framework explains the contrasting rooting depths observed under the same climate for the same species but at distinct topographic positions. We assess the global significance of these hydrologic mechanisms by estimating root water-uptake depths using an inverse model, based on observed productivity and atmosphere, at 30″ (˜1-km) global grids to capture the topography critical to soil hydrology. The resulting patterns of plant rooting depth bear a strong topographic and hydrologic signature at landscape to global scales. They underscore a fundamental plant-water feedback pathway that may be critical to understanding plant-mediated global change.

  15. Hydrologic regulation of plant rooting depth.

    Science.gov (United States)

    Fan, Ying; Miguez-Macho, Gonzalo; Jobbágy, Esteban G; Jackson, Robert B; Otero-Casal, Carlos

    2017-10-03

    Plant rooting depth affects ecosystem resilience to environmental stress such as drought. Deep roots connect deep soil/groundwater to the atmosphere, thus influencing the hydrologic cycle and climate. Deep roots enhance bedrock weathering, thus regulating the long-term carbon cycle. However, we know little about how deep roots go and why. Here, we present a global synthesis of 2,200 root observations of >1,000 species along biotic (life form, genus) and abiotic (precipitation, soil, drainage) gradients. Results reveal strong sensitivities of rooting depth to local soil water profiles determined by precipitation infiltration depth from the top (reflecting climate and soil), and groundwater table depth from below (reflecting topography-driven land drainage). In well-drained uplands, rooting depth follows infiltration depth; in waterlogged lowlands, roots stay shallow, avoiding oxygen stress below the water table; in between, high productivity and drought can send roots many meters down to the groundwater capillary fringe. This framework explains the contrasting rooting depths observed under the same climate for the same species but at distinct topographic positions. We assess the global significance of these hydrologic mechanisms by estimating root water-uptake depths using an inverse model, based on observed productivity and atmosphere, at 30″ (∼1-km) global grids to capture the topography critical to soil hydrology. The resulting patterns of plant rooting depth bear a strong topographic and hydrologic signature at landscape to global scales. They underscore a fundamental plant-water feedback pathway that may be critical to understanding plant-mediated global change.

  16. Multiple-site damage crack growth behaviour in Fibre Metal Laminate structures

    NARCIS (Netherlands)

    Wang, W.

    2017-01-01

    Fibre metal laminates (FMLs)were developed and refined for their superior crack growth resistance and critical damage size that complimented the damage tolerance design philosophy utilized in the aerospace sector. Robust damage tolerance tools have been developed for FMLs. However, they tend to

  17. Effect of the depth base along the vertical on the electrical parameters of a vertical parallel silicon solar cell in open and short circuit

    Science.gov (United States)

    Sahin, Gokhan; Kerimli, Genber

    2018-03-01

    This article presented a modeling study of effect of the depth base initiating on vertical parallel silicon solar cell's photovoltaic conversion efficiency. After the resolution of the continuity equation of excess minority carriers, we calculated the electrical parameters such as the photocurrent density, the photovoltage, series resistance and shunt resistances, diffusion capacitance, electric power, fill factor and the photovoltaic conversion efficiency. We determined the maximum electric power, the operating point of the solar cell and photovoltaic conversion efficiency according to the depth z in the base. We showed that the photocurrent density decreases with the depth z. The photovoltage decreased when the depth base increases. Series and shunt resistances were deduced from electrical model and were influenced and the applied the depth base. The capacity decreased with the depth z of the base. We had studied the influence of the variation of the depth z on the electrical parameters in the base.

  18. Irreversible entropy model for damage diagnosis in resistors

    International Nuclear Information System (INIS)

    Cuadras, Angel; Crisóstomo, Javier; Ovejas, Victoria J.; Quilez, Marcos

    2015-01-01

    We propose a method to characterize electrical resistor damage based on entropy measurements. Irreversible entropy and the rate at which it is generated are more convenient parameters than resistance for describing damage because they are essentially positive in virtue of the second law of thermodynamics, whereas resistance may increase or decrease depending on the degradation mechanism. Commercial resistors were tested in order to characterize the damage induced by power surges. Resistors were biased with constant and pulsed voltage signals, leading to power dissipation in the range of 4–8 W, which is well above the 0.25 W nominal power to initiate failure. Entropy was inferred from the added power and temperature evolution. A model is proposed to understand the relationship among resistance, entropy, and damage. The power surge dissipates into heat (Joule effect) and damages the resistor. The results show a correlation between entropy generation rate and resistor failure. We conclude that damage can be conveniently assessed from irreversible entropy generation. Our results for resistors can be easily extrapolated to other systems or machines that can be modeled based on their resistance

  19. Alkylation damage by lipid electrophiles targets functional protein systems.

    Science.gov (United States)

    Codreanu, Simona G; Ullery, Jody C; Zhu, Jing; Tallman, Keri A; Beavers, William N; Porter, Ned A; Marnett, Lawrence J; Zhang, Bing; Liebler, Daniel C

    2014-03-01

    Protein alkylation by reactive electrophiles contributes to chemical toxicities and oxidative stress, but the functional impact of alkylation damage across proteomes is poorly understood. We used Click chemistry and shotgun proteomics to profile the accumulation of proteome damage in human cells treated with lipid electrophile probes. Protein target profiles revealed three damage susceptibility classes, as well as proteins that were highly resistant to alkylation. Damage occurred selectively across functional protein interaction networks, with the most highly alkylation-susceptible proteins mapping to networks involved in cytoskeletal regulation. Proteins with lower damage susceptibility mapped to networks involved in protein synthesis and turnover and were alkylated only at electrophile concentrations that caused significant toxicity. Hierarchical susceptibility of proteome systems to alkylation may allow cells to survive sublethal damage while protecting critical cell functions.

  20. Alkylation Damage by Lipid Electrophiles Targets Functional Protein Systems*

    Science.gov (United States)

    Codreanu, Simona G.; Ullery, Jody C.; Zhu, Jing; Tallman, Keri A.; Beavers, William N.; Porter, Ned A.; Marnett, Lawrence J.; Zhang, Bing; Liebler, Daniel C.

    2014-01-01

    Protein alkylation by reactive electrophiles contributes to chemical toxicities and oxidative stress, but the functional impact of alkylation damage across proteomes is poorly understood. We used Click chemistry and shotgun proteomics to profile the accumulation of proteome damage in human cells treated with lipid electrophile probes. Protein target profiles revealed three damage susceptibility classes, as well as proteins that were highly resistant to alkylation. Damage occurred selectively across functional protein interaction networks, with the most highly alkylation-susceptible proteins mapping to networks involved in cytoskeletal regulation. Proteins with lower damage susceptibility mapped to networks involved in protein synthesis and turnover and were alkylated only at electrophile concentrations that caused significant toxicity. Hierarchical susceptibility of proteome systems to alkylation may allow cells to survive sublethal damage while protecting critical cell functions. PMID:24429493

  1. Reduction of fume damage in forests: report on the symposium on fume damage held in Tharandt from 30th September to 2nd October 1965

    Energy Technology Data Exchange (ETDEWEB)

    Daessler, H.G.; Ranft, H.

    1967-01-01

    Summaries are presented of 15 papers, including: extent of variation in fume resistance in Larix and problems of breeding for resistance (Schoenbach); results of research on fume damage on experimental areas in E. Germany (H. Enderlin) (noting differences in resistance to SO/sub 2/ damage of various species of Picea, Pinus, and Abies, varieties of Pseudotsuga taxifolia and provenances of Pinus contorta and Larix spp., effect of fertilizers on resistance, and mass selection of resistant planting stock in practice); resistance of Pinus omorika to fume damage (K.F. Wentzel); chemical and physiological studies on the metabolism of the assimilation organs of conifers affected by SO/sub 2/ (S. Boertitz); basic physiological and phenological studies on the preliminary selection of conifers for SO/sub 2/ resistance (M. Vogl); fertilizer trials in fume-damaged pine stands on Dueben Heath (H. Krauss); insect pests on young pine stands in fume-damaged regions in Poland (Z. Sierpinski); birch and alder pests in industrial regions (Z. Schnaider); management of young fume-damaged spruce stands (E. Pelz); effect of fumes from the potash industry on forest stands in East Germany (E. Ewert); the distribution of injurious substances in leaves (G. Halbwachs); emission of SO/sub 2/ absorbed by spruce needles (J. Materna); and estimating fume damage expected near future power stations (H. Lux).

  2. Global patterns of groundwater table depth.

    Science.gov (United States)

    Fan, Y; Li, H; Miguez-Macho, G

    2013-02-22

    Shallow groundwater affects terrestrial ecosystems by sustaining river base-flow and root-zone soil water in the absence of rain, but little is known about the global patterns of water table depth and where it provides vital support for land ecosystems. We present global observations of water table depth compiled from government archives and literature, and fill in data gaps and infer patterns and processes using a groundwater model forced by modern climate, terrain, and sea level. Patterns in water table depth explain patterns in wetlands at the global scale and vegetation gradients at regional and local scales. Overall, shallow groundwater influences 22 to 32% of global land area, including ~15% as groundwater-fed surface water features and 7 to 17% with the water table or its capillary fringe within plant rooting depths.

  3. Capturing Motion and Depth Before Cinematography.

    Science.gov (United States)

    Wade, Nicholas J

    2016-01-01

    Visual representations of biological states have traditionally faced two problems: they lacked motion and depth. Attempts were made to supply these wants over many centuries, but the major advances were made in the early-nineteenth century. Motion was synthesized by sequences of slightly different images presented in rapid succession and depth was added by presenting slightly different images to each eye. Apparent motion and depth were combined some years later, but they tended to be applied separately. The major figures in this early period were Wheatstone, Plateau, Horner, Duboscq, Claudet, and Purkinje. Others later in the century, like Marey and Muybridge, were stimulated to extend the uses to which apparent motion and photography could be applied to examining body movements. These developments occurred before the birth of cinematography, and significant insights were derived from attempts to combine motion and depth.

  4. Rand Corporation Mean Monthly Global Snow Depth

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — All available monthly snow depth climatologies were integrated by the Rand Corporation, in the early 1980s, into one global (excluding Africa and South America)...

  5. Depth to Bedrock: Isopach of Unconsolidated Materials

    Data.gov (United States)

    Iowa State University GIS Support and Research Facility — This vector dataset gives the approximate depth to bedrock (in feet) from Iowa's current land surface. This 50 foot isopach data was derived from the Digital...

  6. Getting to the bottom of orthographic depth.

    Science.gov (United States)

    Schmalz, Xenia; Marinus, Eva; Coltheart, Max; Castles, Anne

    2015-12-01

    Orthographic depth has been studied intensively as one of the sources of cross-linguistic differences in reading, and yet there has been little detailed analysis of what is meant by orthographic depth. Here we propose that orthographic depth is a conglomerate of two separate constructs: the complexity of print-to-speech correspondences and the unpredictability of the derivation of the pronunciations of words on the basis of their orthography. We show that on a linguistic level, these two concepts can be dissociated. Furthermore, we make different predictions about how the two concepts would affect skilled reading and reading acquisition. We argue that refining the definition of orthographic depth opens up new research questions. Addressing these can provide insights into the specific mechanisms by which language-level orthographic properties affect cognitive processes underlying reading.

  7. The Beryllium 7 Depth Distribution Study

    International Nuclear Information System (INIS)

    Jalal Sharib; Zainudin Othman; Dainee Nor Fardzila Ahmad Tugi

    2014-01-01

    The aim of this paper is to study the evolution of 7Be depth distribution in a soil profile. The soil samples have been collected by using plastic core in bare area in Bangi, Malaysia. Each of the soil core samples has been sectioned into 2 mm increments to a depth of 4 cm and the samples are subsequently oven dried at 45°C and gently disaggregated. The sample is passed through a < 2 mm sieve and packed into plastic pot for 7Be analysis using gamma spectrometry with a 24 hour count time. From the findings, show the 7Be depth penetration from this study decreases exponentially with depth and is confined within the top few centimeters and similar with other works been reported. The further discussion for this findings will be presented in full paper. (author)

  8. CLPX-Ground: ISA Snow Depth Transects

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set is part of the NASA Cold Land Processes Field Experiment (CLPX). Parameters include snow depth, surface wetness, surface roughness, canopy, and soil...

  9. Directional spread parameter at intermediate water depth

    Digital Repository Service at National Institute of Oceanography (India)

    SanilKumar, V.; Deo, M.C.; Anand, N.M.; AshokKumar, K.

    The characteristics of directional spread parameters at intermediate water depth are investigated based on a cosine power '2s' directional spreading model. This is based on wave measurements carried out using a Datawell directional waverider buoy...

  10. Monocular depth effects on perceptual fading.

    Science.gov (United States)

    Hsu, Li-Chuan; Kramer, Peter; Yeh, Su-Ling

    2010-08-06

    After prolonged viewing, a static target among moving non-targets is perceived to repeatedly disappear and reappear. An uncrossed stereoscopic disparity of the target facilitates this Motion-Induced Blindness (MIB). Here we test whether monocular depth cues can affect MIB too, and whether they can also affect perceptual fading in static displays. Experiment 1 reveals an effect of interposition: more MIB when the target appears partially covered by, than when it appears to cover, its surroundings. Experiment 2 shows that the effect is indeed due to interposition and not to the target's contours. Experiment 3 induces depth with the watercolor illusion and replicates Experiment 1. Experiments 4 and 5 replicate Experiments 1 and 3 without the use of motion. Since almost any stimulus contains a monocular depth cue, we conclude that perceived depth affects perceptual fading in almost any stimulus, whether dynamic or static. Copyright 2010 Elsevier Ltd. All rights reserved.

  11. Depth-estimation-enabled compound eyes

    Science.gov (United States)

    Lee, Woong-Bi; Lee, Heung-No

    2018-04-01

    Most animals that have compound eyes determine object distances by using monocular cues, especially motion parallax. In artificial compound eye imaging systems inspired by natural compound eyes, object depths are typically estimated by measuring optic flow; however, this requires mechanical movement of the compound eyes or additional acquisition time. In this paper, we propose a method for estimating object depths in a monocular compound eye imaging system based on the computational compound eye (COMPU-EYE) framework. In the COMPU-EYE system, acceptance angles are considerably larger than interommatidial angles, causing overlap between the ommatidial receptive fields. In the proposed depth estimation technique, the disparities between these receptive fields are used to determine object distances. We demonstrate that the proposed depth estimation technique can estimate the distances of multiple objects.

  12. FINANCIAL DEPTH AND FINANCIAL ACCESS IN INDONESIA

    Directory of Open Access Journals (Sweden)

    Sigit Setiawan

    2015-05-01

    Full Text Available This study is intended to analyze the current levels of financial depth and financial access in Indonesia and to analyze the factors affecting them. The analysis method used was a combination of descriptive quantitative, benchmarking, and literature reviews. The conclusion is that the financial depth in Indonesia has not shown a satisfactory level since it was the lowest, or the second lowest ranked country among the sampled countries. Meanwhile, the financial access in Indonesia is relatively better than its financial depth, especially for financial markets, in which Indonesia ranks in the lower average group. From literature reviews, it can be inferred that the main factor driving the poor financial depth in Indonesia is non-competitiveness of the institutions; whereas the driving force of poor financial access in Indonesia are geographical constraints, poverty, a high income gap, and a less than effective national financial development policy.

  13. Sputtering as a means of depth profiling

    International Nuclear Information System (INIS)

    Whitton, J.L.

    1978-01-01

    Probably the most common technique for determination of depth profiles by sputtering is that of secondary ion mass spectrometry. Many problems occur in the important step of converting the time (of sputtering) scale to a depth scale and these problems arise before the secondary ions are ejected. An attempt is made to present a comprehensive list of the effects that should be taken into consideration in the use of sputtering as a means of depth profiling. The various parameters liable to affect the depth profile measurements are listed in four sections: beam conditions; target conditions; experimental environment; and beam-target interactions. The effects are discussed and where interplay occurs, cross-reference is made and examples are provided where possible. (B.R.H.)

  14. Wavefield Extrapolation in Pseudo-depth Domain

    KAUST Repository

    Ma, Xuxin

    2011-12-11

    Wave-equation based seismic migration and inversion tools are widely used by the energy industry to explore hydrocarbon and mineral resources. By design, most of these techniques simulate wave propagation in a space domain with the vertical axis being depth measured from the surface. Vertical depth is popular because it is a straightforward mapping of the subsurface space. It is, however, not computationally cost-effective because the wavelength changes with local elastic wave velocity, which in general increases with depth in the Earth. As a result, the sampling per wavelength also increases with depth. To avoid spatial aliasing in deep fast media, the seismic wave is oversampled in shallow slow media and therefore increase the total computation cost. This issue is effectively tackled by using the vertical time axis instead of vertical depth. This is because in a vertical time representation, the "wavelength" is essentially time period for vertical rays. This thesis extends the vertical time axis to the pseudo-depth axis, which features distance unit while preserving the properties of the vertical time representation. To explore the potentials of doing wave-equation based imaging in the pseudo-depth domain, a Partial Differential Equation (PDE) is derived to describe acoustic wave in this new domain. This new PDE is inherently anisotropic because the use of a constant vertical velocity to convert between depth and vertical time. Such anisotropy results in lower reflection coefficients compared with conventional space domain modeling results. This feature is helpful to suppress the low wavenumber artifacts in reverse-time migration images, which are caused by the widely used cross-correlation imaging condition. This thesis illustrates modeling acoustic waves in both conventional space domain and pseudo-depth domain. The numerical tool used to model acoustic waves is built based on the lowrank approximation of Fourier integral operators. To investigate the potential

  15. Generators for finite depth subfactor planar algebras

    Indian Academy of Sciences (India)

    The main result of Kodiyalam and Tupurani [3] shows that a subfactor planar algebra of finite depth is singly generated with a finite presentation. If P is a subfactor planar algebra of depth k, it is shown there that a single 2k-box generates P. It is natural to ask what the smallest s is such that a single s-box generates P. While ...

  16. Stratospheric aerosol optical depths, 1850-1990

    Science.gov (United States)

    Sato, Makiko; Hansen, James E.; McCormick, M. Patrick; Pollack, James B.

    1993-12-01

    A global stratospheric aerosol database employed for climate simulations is described. For the period 1883-1990, aerosol optical depths are estimated from optical extinction data, whose quality increases with time over that period. For the period 1850-1882, aerosol optical depths are more crudely estimated from volcanological evidence for the volume of ejecta from major known volcanoes. The data set is available over Internet.

  17. FINANCIAL DEPTH AND FINANCIAL ACCESS IN INDONESIA

    OpenAIRE

    Sigit Setiawan

    2015-01-01

    This study is intended to analyze the current levels of financial depth and financial access in Indonesia and to analyze the factors affecting them. The analysis method used was a combination of descriptive quantitative, benchmarking, and literature reviews. The conclusion is that the financial depth in Indonesia has not shown a satisfactory level since it was the lowest, or the second lowest ranked country among the sampled countries. Meanwhile, the financial access in Indonesia is relativel...

  18. Rheumatoid Arthritis and Complementary Medicine: In Depth

    Science.gov (United States)

    ... depression, anxiety, a feeling of helplessness, and low self-esteem. Early treatment to avoid permanent joint damage is ... links Pinterest Read our disclaimer about external links Instagram Read our disclaimer about external links LinkedIn E- ...

  19. Performance of scalable coding in depth domain

    Science.gov (United States)

    Sjöström, Mårten; Karlsson, Linda S.

    2010-02-01

    Common autostereoscopic 3D displays are based on multi-view projection. The diversity of resolutions and number of views of such displays implies a necessary flexibility of 3D content formats in order to make broadcasting efficient. Furthermore, distribution of content over a heterogeneous network should adapt to an available network capacity. Present scalable video coding provides the ability to adapt to network conditions; it allows for quality, temporal and spatial scaling of 2D video. Scalability for 3D data extends this list to the depth and the view domains. We have introduced scalability with respect to depth information. Our proposed scheme is based on the multi-view-plus-depth format where the center view data are preserved, and side views are extracted in enhancement layers depending on depth values. We investigate the performance of various layer assignment strategies: number of layers, and distribution of layers in depth, either based on equal number of pixels or histogram characteristics. We further consider the consequences to variable distortion due to encoder parameters. The results are evaluated considering their overall distortion verses bit rate, distortion per enhancement layer, as well as visual quality appearance. Scalability with respect to depth (and views) allows for an increased number of quality steps; the cost is a slight increase of required capacity for the whole sequence. The main advantage is, however, an improved quality for objects close to the viewer, even if overall quality is worse.

  20. A brain electrophysiological correlate of depth perception

    International Nuclear Information System (INIS)

    Akay, Ahmet; Celebi, Gurbuz

    2009-01-01

    To investigate brain electrical activity accompanying depth perception using random-dot stereograms. Additional experiments were conducted to ascertain the specificity of this potential to depth perception. In the present study, we performed 3 different and independent experiments on 34 subjects to establish the relationship between depth perception and its cortical electrophysiological correlate. Visual evoked potentials in response to visual stimulation by random-dot stereograms were recorded. To achieve this goal, a data acquisition and analysis system, different from common visual evoked potential recording systems, consisting of 2 personal computers, was used. One of the computers was used to generate the visual stimulus patterns and the other to record and digitally average the potentials evoked by the stimuli. This study was carried out at the Department of Biophysics of Ege University Medical School, Izmir, Turkey, from April to December, 2006. A negative potential component, which is thought to arise in association with depth perception, was recorded from the occipital region from 30 of the 34 subjects. Typically, it had a mean latency of 211.46 ms and 6.40 micron V amplitude. The negative potential is related to depth perception, as this component is present in the responses to stimulus, which carries disparity information but is absent when the stimulus is switched to no disparity information. Additional experiments also showed that the specificity of this component to depth perception becomes evident beyond doubt. (author)

  1. Total Variation Depth for Functional Data

    KAUST Repository

    Huang, Huang

    2016-11-15

    There has been extensive work on data depth-based methods for robust multivariate data analysis. Recent developments have moved to infinite-dimensional objects such as functional data. In this work, we propose a new notion of depth, the total variation depth, for functional data. As a measure of depth, its properties are studied theoretically, and the associated outlier detection performance is investigated through simulations. Compared to magnitude outliers, shape outliers are often masked among the rest of samples and harder to identify. We show that the proposed total variation depth has many desirable features and is well suited for outlier detection. In particular, we propose to decompose the total variation depth into two components that are associated with shape and magnitude outlyingness, respectively. This decomposition allows us to develop an effective procedure for outlier detection and useful visualization tools, while naturally accounting for the correlation in functional data. Finally, the proposed methodology is demonstrated using real datasets of curves, images, and video frames.

  2. Computational stress and damage modelling for rolling contact fatigue

    DEFF Research Database (Denmark)

    Cerullo, Michele

    and of compressive residual stresses are also analyzed. The stress history of a material point at the depth where the maximum Dang Van damage factor is reached is then recorded and used in a subsequent micro-mechanical analysis. The stress history is applied as periodic boundary conditions in a representative volume...

  3. Radiation damage measurements on CZT drift strip detectors

    DEFF Research Database (Denmark)

    Kuvvetli, Irfan; Budtz-Jørgensen, Carl; Korsbech, Uffe C C

    2003-01-01

    from 2 x 10(8) to 60 x 10(8) p(+)/cm(2). Even for the highest fluences, which had a dramatic effect on the spectroscopic performance, we were able to recover the detectors after an appropriate annealing procedure. The radiation damage was studied as a function of depth inside the detector material...

  4. Ex post damage assessment: an Italian experience

    Science.gov (United States)

    Molinari, D.; Menoni, S.; Aronica, G. T.; Ballio, F.; Berni, N.; Pandolfo, C.; Stelluti, M.; Minucci, G.

    2014-04-01

    In recent years, awareness of a need for more effective disaster data collection, storage, and sharing of analyses has developed in many parts of the world. In line with this advance, Italian local authorities have expressed the need for enhanced methods and procedures for post-event damage assessment in order to obtain data that can serve numerous purposes: to create a reliable and consistent database on the basis of which damage models can be defined or validated; and to supply a comprehensive scenario of flooding impacts according to which priorities can be identified during the emergency and recovery phase, and the compensation due to citizens from insurers or local authorities can be established. This paper studies this context, and describes ongoing activities in the Umbria and Sicily regions of Italy intended to identifying new tools and procedures for flood damage data surveys and storage in the aftermath of floods. In the first part of the paper, the current procedures for data gathering in Italy are analysed. The analysis shows that the available knowledge does not enable the definition or validation of damage curves, as information is poor, fragmented, and inconsistent. A new procedure for data collection and storage is therefore proposed. The entire analysis was carried out at a local level for the residential and commercial sectors only. The objective of the next steps for the research in the short term will be (i) to extend the procedure to other types of damage, and (ii) to make the procedure operational with the Italian Civil Protection system. The long-term aim is to develop specific depth-damage curves for Italian contexts.

  5. Resistance-resistant antibiotics.

    Science.gov (United States)

    Oldfield, Eric; Feng, Xinxin

    2014-12-01

    New antibiotics are needed because drug resistance is increasing while the introduction of new antibiotics is decreasing. We discuss here six possible approaches to develop 'resistance-resistant' antibiotics. First, multitarget inhibitors in which a single compound inhibits more than one target may be easier to develop than conventional combination therapies with two new drugs. Second, inhibiting multiple targets in the same metabolic pathway is expected to be an effective strategy owing to synergy. Third, discovering multiple-target inhibitors should be possible by using sequential virtual screening. Fourth, repurposing existing drugs can lead to combinations of multitarget therapeutics. Fifth, targets need not be proteins. Sixth, inhibiting virulence factor formation and boosting innate immunity may also lead to decreased susceptibility to resistance. Although it is not possible to eliminate resistance, the approaches reviewed here offer several possibilities for reducing the effects of mutations and, in some cases, suggest that sensitivity to existing antibiotics may be restored in otherwise drug-resistant organisms. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. Handheld White Light Interferometer for Measuring Defect Depth in Windows

    Science.gov (United States)

    Youngquist, Robert; Simmons, Stephen; Cox, Robert

    2010-01-01

    Accurate quantification of defects (scratches and impacts) is vital to the certification of flight hardware and other critical components. The amount of damage to a particular component contributes to the performance, reliability, and safety of a system, which ultimately affects the success or failure of a mission or test. The launch-commit criteria on a Space Shuttle Orbiter window are governed by the depth of the defects that are identified by a visual inspection. This measurement of a defect is not easy to obtain given the environment, size of the defect, and location of the window(s). The determination of depth has typically been performed by taking a mold impression and measuring the impression with an optical profiling instrument. Another method of obtaining an estimate of the depth is by using a refocus microscope. To use a refocus microscope, the surface of the glass and bottom of the defect are, in turn, brought into focus by the operator. The amount of movement between the two points corresponds to the depth of the defect. The refocus microscope requires a skilled operator and has been proven to be unreliable when used on Orbiter windows. White light interferometry was chosen as a candidate to replace the refocus microscope. The White Light Interferometer (WLI) was developed to replace the refocus microscope as the instrument used for measuring the depth of defects in Orbiter windows. The WLI consists of a broadband illumination source, interferometer, detector, motion control, displacement sensor, mechanical housing, and support electronics. The illumination source for the WLI is typically a visible light emitting diode (LED) or a near-infrared superluminescent diode (SLD) with power levels of less than a milliwatt. The interferometer is a Michelson configuration consisting of a 1-in. (2.5-cm) cube beam splitter, a 0.5-in. (1.3-cm) optical window as a movable leg (used to closely match the return intensity of the fixed leg from the window), and a

  7. Modelling of creep damage development in ferritic steels

    Energy Technology Data Exchange (ETDEWEB)

    Sandstroem, R. [Swedish Institute for Metals Research, Stockholm (Sweden)

    1998-12-31

    The physical creep damage, which is observed in fossil-fired power plants, is mainly due to the formation of cavities and their interaction. It has previously been demonstrated that both the nucleation and growth of creep cavities can be described by power functions in strain for low alloy and 12 % CrMoV creep resistant steels. It possible to show that the physical creep damage is proportional to the product of the number of cavities and their area. Hence, the physical creep damage can also be expressed in terms of the creep strain. In the presentation this physical creep damage is connected to the empirical creep damage classes (1-5). A creep strain-time function, which is known to be applicable to low alloy and 12 % CrMoV creep resistant steels, is used to describe tertiary creep. With this creep strain - time model the residual lifetime can be predicted from the observed damage. For a given damage class the remaining life is directly proportional to the service time. An expression for the time to the next inspection is proposed. This expression is a function of fraction of the total allowed damage, which is consumed till the next inspection. (orig.) 10 refs.

  8. Natural resource damage assessment

    International Nuclear Information System (INIS)

    Seddelmeyer, J.

    1991-01-01

    The assessment and collection of natural resource damages from petroleum and chemical companies unfortunate enough to have injured publicly owned natural resources is perhaps the most rapidly expanding area of environmental liability. The idea of recovering for injury to publicly owned natural resources is an extension of traditional common law tort concepts under which a person who negligently injures another or his property is called upon to compensate the injured party. Normally, once liability has been established, it is a fairly straightforward matter to calculate the various elements of loss, such as the cost to repair or replace damaged property, or medical expenses, and lost income. More difficult questions, such as the amount to be awarded for pain and suffering or emotional distress, are left to the jury, although courts limit the circumstances in which the jury is permitted to award such damages

  9. Coal transportation road damage

    International Nuclear Information System (INIS)

    Burtraw, D.; Harrison, K.; Pawlowski, J.A.

    1994-01-01

    Heavy trucks are primarily responsible for pavement damage to the nation's highways. In this paper we evaluate the pavement damage caused by coal trucks. We analyze the chief source of pavement damage (vehicle weight per axle, not total vehicle weight) and the chief cost involved (the periodic overlay that is required when a road's surface becomes worn). This analysis is presented in two stages. In the first section we present a synopsis of current economic theory including simple versions of the formulas that can be: used to calculate costs of pavement wear. In the second section we apply this theory to a specific example proximate to the reference environment for the Fuel Cycle Study in New Mexico in order to provide a numerical measure of the magnitude of the costs

  10. Analysis of ductile crack growth by a simple damage model

    International Nuclear Information System (INIS)

    Zhang, Ch.; Gross, D.

    1993-01-01

    A strip damage-zone model of the Dugdale-Barenblatt-model type is presented in this paper for analyzing crack growth in ductile materials with damage evolution. In particular, a semi-infinite Mode-1 crack in plane stress or plane strain is considered. The damage is assumed to be present in form of dispersed microvoids, which are localized into a narrow strip direct ahead of a crack-tip. This configuration approximates the real situation naturally arising due to the high stress and strain concentrations in the proximity of the crack-tip. A simple damage model of the Gurson-model type is developed for uniaxial tension to describe the macroscopic properties of the strip damage-zone. Under small-scale yielding and small-scale damage conditions, a system of nonlinear integral equations for the plastic strain and the length of the damage-zone is derived. Numerical results are presented and discussed for the crack opening displacement, the stress and damage distribution within the plastic/damage zone, and the crack resistance curve. Special attention is devoted to reveal the effect of damage evolution on the ductile crack growth

  11. Depth resolution and preferential sputtering in depth profiling of sharp interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Hofmann, S. [Max Planck Institute for Intelligent Systems (formerly MPI for Metals Research), Heisenbergstrasse 3, D-70569 Stuttgart (Germany); Han, Y.S. [Department of Physics, Shantou University, 243 Daxue Road, Shantou, 515063 Guangdong (China); Wang, J.Y., E-mail: wangjy@stu.edu.cn [Department of Physics, Shantou University, 243 Daxue Road, Shantou, 515063 Guangdong (China)

    2017-07-15

    Highlights: • Interfacial depth resolution from MRI model depends on sputtering rate differences. • Depth resolution critically depends on the dominance of roughness or atomic mixing. • True (depth scale) and apparent (time scale) depth resolutions are different. • Average sputtering rate approximately yields true from apparent depth resolution. • Profiles by SIMS and XPS are different but similar to surface concentrations. - Abstract: The influence of preferential sputtering on depth resolution of sputter depth profiles is studied for different sputtering rates of the two components at an A/B interface. Surface concentration and intensity depth profiles on both the sputtering time scale (as measured) and the depth scale are obtained by calculations with an extended Mixing-Roughness-Information depth (MRI)-model. The results show a clear difference for the two extreme cases (a) preponderant roughness and (b) preponderant atomic mixing. In case (a), the interface width on the time scale (Δt(16–84%)) increases with preferential sputtering if the faster sputtering component is on top of the slower sputtering component, but the true resolution on the depth scale (Δz(16–84%)) stays constant. In case (b), the interface width on the time scale stays constant but the true resolution on the depth scale varies with preferential sputtering. For similar order of magnitude of the atomic mixing and the roughness parameters, a transition state between the two extremes is obtained. While the normalized intensity profile of SIMS represents that of the surface concentration, an additional broadening effect is encountered in XPS or AES by the influence of the mean electron escape depth which may even cause an additional matrix effect at the interface.

  12. Characterizing flow pathways in a sandstone aquifer at multiple depths

    Science.gov (United States)

    Medici, Giacomo; West, Jared; Mountney, Nigel

    2017-04-01

    Sandstone aquifers are commonly assumed to represent porous media characterized by a permeable matrix. However, such aquifers may be heavily fractured where rock properties and timing of deformation favour brittle failure and crack opening. In many aquifer types, fractures associated with faults, bedding planes and stratabound joints represent preferential pathways for fluids and contaminants. This presentation reports well-test results and outcrop-scale studies that reveal how strongly lithified siliciclastic rocks may be entirely dominated by fracture flow at shallow depths (≤ 150 m), similar to limestone and crystalline aquifers. The Triassic St Bees Sandstone Formation of the UK East Irish Sea Basin represents an optimum succession for study of the influence of both sedimentary and tectonic aquifer heterogeneities in a strongly lithified sandstone aquifer-type. This sedimentary succession of fluvial origin accumulated in rapidly subsiding basins, which typically favour preservation of complete depositional cycles, including fine-grained mudstone and silty sandstone layers of floodplain origin interbedded with sandstone-dominated fluvial channel deposits. Vertical joints in the St Bees Sandstone Formation form a pervasive stratabound system whereby joints terminate at bedding-parallel discontinuities. Additionally, normal faults are present through the succession and record development of open-fractures in their damage zones. Here, the shallow aquifer (depth ≤150 m BGL) was characterized in outcrop and well tests. Fluid temperature, conductivity and flow-velocity logs record inflows and outflows from normal faults, as well as from pervasive bed-parallel fractures. Quantitative flow logging analyses in boreholes that cut fault planes indicate that zones of fault-related open fractures typically represent ˜ 50% of well transmissivity. The remaining flow component is dominated by bed-parallel fractures. However, such sub-horizontal fractures become the

  13. Measuring penetration depth of electron beam welds. Final report

    International Nuclear Information System (INIS)

    Hill, J.W.; Collins, M.C.; Mentesana, C.P.; Watterson, C.E.

    1975-07-01

    The feasibility of evaluating electron beam welds using state-of-the-art techniques in the fields of holographic interferometry, micro-resistance measurements, and heat transfer was studied. The holographic study was aimed at evaluating weld defects by monitoring variations in weld strength under mechanical stress. The study, along with successful work at another facility, proved the feasibility of this approach for evaluating welds, but it did not assign any limitations to the technique. The micro-resistance study was aimed at evaluating weld defects by measuring the electrical resistance across the weld junction as a function of distance along the circumference. Experimentation showed this method, although sensitive, is limited by the same factors affecting other conventional nondestructive tests. Nevertheless, it was successful at distinguishing between various depths of penetration. It was also shown to be a sensitive thickness gage for thin-walled parts. The infrared study was aimed at evaluating weld defects by monitoring heat transfer through the weld under transient thermal conditions. Experimentation showed that this theoretically sound technique is not workable with the infrared equipment currently available at Bendix Kansas City. (U.S.)

  14. TRENDS IN ESTIMATED MIXING DEPTH DAILY MAXIMUMS

    Energy Technology Data Exchange (ETDEWEB)

    Buckley, R; Amy DuPont, A; Robert Kurzeja, R; Matt Parker, M

    2007-11-12

    Mixing depth is an important quantity in the determination of air pollution concentrations. Fireweather forecasts depend strongly on estimates of the mixing depth as a means of determining the altitude and dilution (ventilation rates) of smoke plumes. The Savannah River United States Forest Service (USFS) routinely conducts prescribed fires at the Savannah River Site (SRS), a heavily wooded Department of Energy (DOE) facility located in southwest South Carolina. For many years, the Savannah River National Laboratory (SRNL) has provided forecasts of weather conditions in support of the fire program, including an estimated mixing depth using potential temperature and turbulence change with height at a given location. This paper examines trends in the average estimated mixing depth daily maximum at the SRS over an extended period of time (4.75 years) derived from numerical atmospheric simulations using two versions of the Regional Atmospheric Modeling System (RAMS). This allows for differences to be seen between the model versions, as well as trends on a multi-year time frame. In addition, comparisons of predicted mixing depth for individual days in which special balloon soundings were released are also discussed.

  15. DEPTH CAMERAS ON UAVs: A FIRST APPROACH

    Directory of Open Access Journals (Sweden)

    A. Deris

    2017-02-01

    Full Text Available Accurate depth information retrieval of a scene is a field under investigation in the research areas of photogrammetry, computer vision and robotics. Various technologies, active, as well as passive, are used to serve this purpose such as laser scanning, photogrammetry and depth sensors, with the latter being a promising innovative approach for fast and accurate 3D object reconstruction using a broad variety of measuring principles including stereo vision, infrared light or laser beams. In this study we investigate the use of the newly designed Stereolab's ZED depth camera based on passive stereo depth calculation, mounted on an Unmanned Aerial Vehicle with an ad-hoc setup, specially designed for outdoor scene applications. Towards this direction, the results of its depth calculations and scene reconstruction generated by Simultaneous Localization and Mapping (SLAM algorithms are compared and evaluated based on qualitative and quantitative criteria with respect to the ones derived by a typical Structure from Motion (SfM and Multiple View Stereo (MVS pipeline for a challenging cultural heritage application.

  16. Genomic Selection Using Genotyping-By-Sequencing Data with Different Coverage Depth in Perennial Ryegrass

    DEFF Research Database (Denmark)

    Cericola, Fabio; Fé, Dario; Janss, Luc

    2015-01-01

    the diagonal elements by estimating the amount of genetic variance caused by the reduction of the coverage depth. Secondly we developed a method to scale the relationship matrix by taking into account the overall amount of pairwise non-missing loci between all families. Rust resistance and heading date were...

  17. High bit depth infrared image compression via low bit depth codecs

    DEFF Research Database (Denmark)

    Belyaev, Evgeny; Mantel, Claire; Forchhammer, Søren

    Future infrared remote sensing systems, such as monitoring of the Earth's environment by satellites, infrastructure inspection by unmanned airborne vehicles etc., will require 16 bit depth infrared images to be compressed and stored or transmitted for further analysis. Such systems are equipped...... with low power embedded platforms where image or video data is compressed by a hardware block called the video processing unit (VPU). However, in many cases using two 8-bit VPUs can provide advantages compared with using higher bit depth image compression directly. We propose to compress 16 bit depth...... images via 8 bit depth codecs in the following way. First, an input 16 bit depth image is mapped into 8 bit depth images, e.g., the first image contains only the most significant bytes (MSB image) and the second one contains only the least significant bytes (LSB image). Then each image is compressed...

  18. Pulsed glow discharge mass spectrometry for molecular depth profiling of polymers

    International Nuclear Information System (INIS)

    Lobo, L.; Pereiro, R.; Sanz-Medel, A.; Bordel, N.; Pisonero, J.; Licciardello, A.; Tuccitto, N.; Tempez, A.; Chapon, P.

    2009-01-01

    Full text: Nowadays thin films of polymeric materials involve a wide range of industrial applications, so techniques capable of providing in-depth profile information are required. Most of the techniques available for this purpose are based on the use of energetic particle beams which interact with polymers producing undesirable physicochemical modifications. Radiofrequency pulsed glow discharge (rf-pulsed-GD) coupled to time-of-flight mass spectrometry (TOFMS) could afford the possibility of acquiring both elemental and molecular information creating minimal damage to surfaces and thereby obtaining depth profiles. This work will evaluate rf-GDs coupled to an orthogonal TOFMS for direct analysis of polymers. (author)

  19. Change of Precipitation Behavior and Impact Toughness with Depths in Quenched Thick SAF 2507 Super Duplex Stainless Steel

    Science.gov (United States)

    Ahiale, Godwin Kwame; Kim, Doo-Hyun; Yang, Won-Jon; Lee, Jong-Hoon; Oh, Yong-Jun

    2018-03-01

    We investigated the change of precipitation behavior and impact resistance as a function of depth from the surface of thick block of SAF 2507 super duplex stainless steel with the thickness (T) of 200 mm after water quenching from 1050 °C. The amount of detrimental sigma phase increased smoothly until the depth of 0.25T, followed by a rapid increase from 0.25T to the center. However, the impact strength decreased significantly with only 1.3% of area fraction of sigma phase as the depth increased past 0.1T. Based on fractography analysis for the samples at such small depth ranges, the distance between the sigma phase particles affected the relative amount of initiating brittle cracks in front of the notch and was one of the crucial factors that dramatically reduced impact resistance with depth.

  20. Method for Predicting Void Ratio and Triaxial Friction Angle from Laboratory CPT at Shallow Depths

    DEFF Research Database (Denmark)

    Larsen, Kim André; Ibsen, Lars Bo

    In this report an investigation of the relationship between the tip resistance, qc of a laboratory CPT-probe versus the relative density, Dr and friction angle, ∏ of Aalborg University Sand No. 0 is carried out. A method for estimating the relative density and the triaxial friction angle from...... the cone resistance of the laboratory probe is proposed. The suggested method deals with the fact that the friction angle is depended of the stress level especially at low stresses. The method includes a calibration of the cone resistance from the laboratory CPT at shallow depths i.e. low values of d...

  1. Effects of inserted depth of wall penetration on basal stability of foundation pits

    Science.gov (United States)

    Zhou, Aizhao; Shen, Hao; Sun, Jinguo

    2017-05-01

    Evaluation of basal heave stability is one of important design checks for excavations in soft clays. The commonly used classical calculation method based on limit equilibrium theory and the safety coefficient formula recommended by the current code, do not consider the influence of supporting structure of foundation pit depth heave stability, which results in conservative. Considering the wall stiffness and strength, the effective stress changes in different depth of soil, the frictional resistance between the retaining wall and the passive zone, the vertical shear resistance of the soil behind the wall and other factors. The modified safety factor calculation formula of foundation pit stability is presented, comparison analysis of calculation method combined with examples. The calculation results show that the safety factor of foundation pit stability is improved considering the influence of supporting structure depth, the calculation results are more reasonable.

  2. Silicon surface damage caused by reactive ion etching in fluorocarbon gas mixtures containing hydrogen

    International Nuclear Information System (INIS)

    Norstroem, H.; Blom, H.; Ostling, M.; Nylandsted Larsen, A.; Keinonen, J.; Berg, S.

    1991-01-01

    For selective etching of SiO 2 on silicon, gases or gas mixtures containing hydrogen are often used. Hydrogen from the glow discharge promotes the formation of a thin film polymer layer responsible for the selectivity of the etching process. The reactive ion etch (RIE) process is known to create damage in the silicon substrate. The influence of hydrogen on the damage and deactivation of dopants is investigated in the present work. The distribution of hydrogen in silicon, after different etching and annealing conditions have been studied. The influence of the RIE process on the charge carrier concentration in silicon has been investigated. Various analytical techniques like contact resistivity measurements, four point probe measurements, and Hall measurements have been used to determine the influence of the RIE process on the electrical properties of processed silicon wafers. The hydrogen profile in as-etched and post annealed wafers was determined by the 1 H( 15 N,αγ) 12 C nuclear reaction. The depth of the deactivated surface layer is discussed in terms of the impinging hydrogen ion energy, i.e., the possibility of H + ions to pick up an energy equal to the peak-to-peak voltage of the rf signal

  3. DepthCut: Improved Depth Edge Estimation Using Multiple Unreliable Channels

    OpenAIRE

    Guerrero, Paul; Winnemöller, Holger; Li, Wilmot; Mitra, Niloy J.

    2017-01-01

    In the context of scene understanding, a variety of methods exists to estimate different information channels from mono or stereo images, including disparity, depth, and normals. Although several advances have been reported in the recent years for these tasks, the estimated information is often imprecise particularly near depth discontinuities or creases. Studies have however shown that precisely such depth edges carry critical cues for the perception of shape, and play important roles in tas...

  4. Depth sensitivity of Lexan polycarbonate detector

    CERN Document Server

    Awad, E M

    1999-01-01

    The dependence of the registration sensitivity of Lexan polycarbonate with depth inside the detector was studied. Samples of Lexan from General Electric were irradiated to two long range ions. These were Ni and Au ions with a projectile energy of 0.3 and 1 GeV/n. Two independent techniques, the track-diameter technique (TDT) and the track profile technique (TPT), were used. The registration sensitivity was measured at depths of 7, 10, 15, 18, 20, 28, 35 and 40 mu m inside the detector. The results of the two techniques show that the detector sensitivity decreases gradually with the depth inside the detector. It reaches 20 % less compared to sensitivity at the surface after 40 mu m have been removed.

  5. Depth-resolved fluorescence of biological tissue

    Science.gov (United States)

    Wu, Yicong; Xi, Peng; Cheung, Tak-Hong; Yim, So Fan; Yu, Mei-Yung; Qu, Jianan Y.

    2005-06-01

    The depth-resolved autofluorescence ofrabbit oral tissue, normal and dysplastic human ectocervical tissue within l20μm depth were investigated utilizing a confocal fluorescence spectroscopy with the excitations at 355nm and 457nm. From the topmost keratinizing layer of oral and ectocervical tissue, strong keratin fluorescence with the spectral characteristics similar to collagen was observed. The fluorescence signal from epithelial tissue between the keratinizing layer and stroma can be well resolved. Furthermore, NADH and FADfluorescence measured from the underlying non-keratinizing epithelial layer were strongly correlated to the tissue pathology. This study demonstrates that the depth-resolved fluorescence spectroscopy can reveal fine structural information on epithelial tissue and potentially provide more accurate diagnostic information for determining tissue pathology.

  6. Depth absorbed dose distributions for electrons

    International Nuclear Information System (INIS)

    Fregene, A.O.

    1980-01-01

    There is controversy over the comparative depth dose distributions produced by 10 MeV microtron and linear accelerator electron beams. The arguments produced by Brahme and Svensson in their rejection of silicon diode and LiF depth dose measurements (1976, Phys. Med. Biol., vol. 21, 304; 1978, Phys. Med. Biol., vol. 23, 788) have been shown to be insubstantial. These depth dose measurements in fact confirm that the two types of electron beam are not significantly different at 10 MeV. The significant differences originally reported by Brahme et al. on the basis of liquid ionisation chamber measurements (Brahme, A., Hulten, G., and Svensson, H., 1975, Phys. Med. Biol., vol. 20, 39), and the implied clinical advantage of the microtron, therefore both remain in doubt. (UK)

  7. Eye movements in depth to visual illusions

    Science.gov (United States)

    Wismeijer, D. A.

    2009-10-01

    We perceive the three-dimensional (3D) environment that surrounds us with deceptive effortlessness. In fact, we are far from comprehending how the visual system provides us with this stable perception of the (3D) world around us. This thesis will focus on the interplay between visual perception of depth and its closely related action system, eye movements in depth. The human visual system is comprised of a sensory (input) and an output (motor) system. Processed information from the sensory system can result in two explicit measurable response types: conscious visual perception and ocular motor behavior. It is still a matter of debate whether conscious visual perception and action (including hand- and arm-movements) use the same information or whether the visual system has separate channels processing information for perception and action. In this thesis, we study (1) if separate channels, one for eye movements and one for conscious visual perception, indeed exist, and (2) if so, if there is a direct input from the perceptual pathway to the motor pathway. Assuming that either eye movements and conscious visual perception are based on information from a common source (a negative answer to issue 1) or perception can directly influence, or guide, eye movements (an affirmative answer to research question 2), (eye) movements reflect our conscious visual perception. If so, eye movements could provide us with an alternative method to probe our conscious visual perception, making explicit perceptual reports superfluous. In this thesis we focus on depth perception and the two types of eye movements that are closest related to depth perception, namely vergence (an eye movement that gets a certain depth plane into focus) and saccades (a rapid eye movement to change gaze direction). Over the last 20 years it has been shown that depth perception is based on a weighted combination of depth cues available such as linear perspective, occlusion and binocular disparity. How eye

  8. XPS investigation of depth profiling induced chemistry

    Science.gov (United States)

    Pratt, Quinn; Skinner, Charles; Koel, Bruce; Chen, Zhu

    2017-10-01

    Surface analysis is an important tool for understanding plasma-material interactions. Depth profiles are typically generated by etching with a monatomic argon ion beam, however this can induce unintended chemical changes in the sample. Tantalum pentoxide, a sputtering standard, and PEDOT:PSS, a polymer that was used to mimic the response of amorphous carbon-hydrogen co-deposits, were studied. We compare depth profiles generated with monatomic and gas cluster argon ion beams (GCIB) using X-ray photoelectron spectroscopy (XPS) to quantify chemical changes. In both samples, monatomic ion bombardment led to beam-induced chemical changes. Tantalum pentoxide exhibited preferential sputtering of oxygen and the polymer experienced significant bond modification. Depth profiling with clusters is shown to mitigate these effects. We present sputtering rates for Ta2O5 and PEDOT:PSS as a function of incident energy and flux. Support was provided through DOE Contract Number DE-AC02-09CH11466.

  9. Wavefield extrapolation in pseudo-depth domain

    KAUST Repository

    Ma, Xuxin

    2012-01-01

    Extrapolating seismic waves in Cartesian coordinate is prone to uneven spatial sampling, because the seismic wavelength tends to grow with depth, as velocity increase. We transform the vertical depth axis to a pseudo one using a velocity weighted mapping, which can effectively mitigate this wavelength variation. We derive acoustic wave equations in this new domain based on the direct transformation of the Laplacian derivatives, which admits solutions that are more accurate and stable than those derived from the kinematic transformation. The anisotropic versions of these equations allow us to isolate the vertical velocity influence and reduce its impact on modeling and imaging. The major benefit of extrapolating wavefields in pseudo-depth space is its near uniform wavelength as opposed to the normally dramatic change of wavelength with the conventional approach. Time wavefield extrapolation on a complex velocity shows some of the features of this approach.

  10. Core damage risk indicators

    International Nuclear Information System (INIS)

    Szikszai, T.

    1994-01-01

    The purpose of this document is to show a method for the fast recalculation of the PSA. To avoid the information loose, it is necessary to simplify the PSA models, or at least reorganize them. The method, introduced in this document, require that preparation, so we try to show, how to do that. This document is an introduction. This is the starting point of the work related to the development of the risk indicators. In the future, with the application of this method, we are going to show an everyday use of the PSA results to produce the indicators of the core damage risk. There are two different indicators of the plant safety performance, related to the core damage risk. The first is the core damage frequency indicator (CDFI), and the second is the core damage probability indicator (CDPI). Of course, we cannot describe all of the possible ways to use these indicators, rather we will try to introduce the requirements to establish such an indicator system and the calculation process

  11. mapDamage

    DEFF Research Database (Denmark)

    Ginolhac, Aurélien; Rasmussen, Morten; Gilbert, Tom

    2011-01-01

    Ancient DNA extracts consist of a mixture of contaminant DNA molecules, most often originating from environmental microbes, and endogenous fragments exhibiting substantial levels of DNA damage. The latter introduce specific nucleotide misincorporations and DNA fragmentation signatures in sequenci...... of the SAMtools suite and R environment and has been validated on both GNU/Linux and MacOSX operating systems....

  12. Experimental and analytical investigation on metal damage suffered from simulated lightning currents

    Science.gov (United States)

    Yakun, LIU; Zhengcai, FU; Quanzhen, LIU; Baoquan, LIU; Anirban, GUHA

    2017-12-01

    The damage of two typical metal materials, Al alloy 3003 and steel alloy Q235B, subjected to four representative lightning current components are investigated by laboratory and analytical studies to provide fundamental data for lightning protection. The four lightning components simulating the natural lightning consist of the first return stroke, the continuing current of interval stroke, the long continuing current, and the subsequent stroke, with amplitudes 200 kA, 8 kA, 400 A, and 100 kA, respectively. The damage depth and area suffered from different lightning components are measured by the ultrasonic scanning system. And the temperature rise is measured by the thermal imaging camera. The results show that, for both Al 3003 and steel Q235B, the first return stroke component results in the largest damage area with damage depth 0.02 mm uttermost. The long continuing current component leads to the deepest damage depth of 3.3 mm for Al 3003 and much higher temperature rise than other components. The correlation analysis between damage results and lightning parameters indicates that the damage depth has a positive correlation with charge transfer. The damage area is mainly determined by the current amplitude and the temperature rise increases linearly with the charge transfer larger.

  13. Factors controlling contrail cirrus optical depth

    Directory of Open Access Journals (Sweden)

    B. Kärcher

    2009-08-01

    Full Text Available Aircraft contrails develop into contrail cirrus by depositional growth and sedimentation of ice particles and horizontal spreading due to wind shear. Factors controlling this development include temperature, ice supersaturation, thickness of ice-supersaturated layers, and vertical gradients in the horizontal wind field. An analytical microphysical cloud model is presented and validated that captures these processes. Many individual contrail cirrus are simulated that develop differently owing to the variability in the controlling factors, resulting in large samples of cloud properties that are statistically analyzed. Contrail cirrus development is studied over the first four hours past formation, similar to the ages of line-shaped contrails that were tracked in satellite imagery on regional scales. On these time scales, contrail cirrus optical depth and microphysical variables exhibit a marked variability, expressed in terms of broad and skewed probability distribution functions. Simulated mean optical depths at a wavelength of 0.55 μm range from 0.05-0.5 and a substantial fraction 20-50% of contrail cirrus stay subvisible (optical depth <0.02, depending on meteorological conditions.

    A detailed analysis based on an observational case study over the continental USA suggests that previous satellite measurements of line-shaped persistent contrails have missed about 89%, 50%, and 11% of contrails with optical depths 0-0.05, 0.05-0.1, and 0.1-0.2, respectively, amounting to 65% of contrail coverage of all optical depths. When comparing observations with simulations and when estimating the contrail cirrus climate impact, not only mean values but also the variability in optical depth and microphysical properties need to be considered.

  14. Efficient Depth Enhancement Using a Combination of Color and Depth Information.

    Science.gov (United States)

    Lee, Kyungjae; Ban, Yuseok; Lee, Sangyoun

    2017-07-01

    Studies on depth images containing three-dimensional information have been performed for many practical applications. However, the depth images acquired from depth sensors have inherent problems, such as missing values and noisy boundaries. These problems significantly affect the performance of applications that use a depth image as their input. This paper describes a depth enhancement algorithm based on a combination of color and depth information. To fill depth holes and recover object shapes, asynchronous cellular automata with neighborhood distance maps are used. Image segmentation and a weighted linear combination of spatial filtering algorithms are applied to extract object regions and fill disocclusion in the object regions. Experimental results on both real-world and public datasets show that the proposed method enhances the quality of the depth image with low computational complexity, outperforming conventional methods on a number of metrics. Furthermore, to verify the performance of the proposed method, we present stereoscopic images generated by the enhanced depth image to illustrate the improvement in quality.

  15. Magnetic depth profiles by neutron reflection

    International Nuclear Information System (INIS)

    Felcher, G.P.; Gray, K.E.; Kampwirth, R.T.; Brodsky, M.B.

    1985-09-01

    Fresnel reflection of polarized neutrons was used to measure the dependence of magnetic induction B in materials as a function of depth from the surface. The penetration depth of a magnetic field is superconductors was investigated, as well as the remnant superconducting surface sheath when the applied field exceeded the critical value (H/sub c2/ < H < H/sub c3/ in type II superconductors). In addition ferromagnets in bulk and in thin layers were examined. The prototype instrument with which the measurements were made was described. 19 refs., 5 figs

  16. Financial Depth and Financial Access in Indonesia

    OpenAIRE

    Setiawan, Sigit

    2015-01-01

    This study is intended to analyse the current levels of financial depth and financial access in Indonesia and to analyse the factors affecting them. The analysis method used was a combination of descriptive quantitative, benchmarking, and literature reviews. The conclusion is that the financial depth in Indonesia has not shown a satisfactory level since it was the lowest, or the second lowest ranked country among the sampled countries. Meanwhile, the financial access in Indonesia is relativel...

  17. Electrical resistivity of fast neutron irradiated bismuth

    International Nuclear Information System (INIS)

    Quelard, G.

    1975-01-01

    The production and recovery of fast neutron radiation damage in bismuth, at 20K has been studied by means of electrical resistivity. Results are independent of crystallographic orientation and indicate a creation of carriers during irradiation [fr

  18. Crop Damage: The Hail Size Factor.

    Science.gov (United States)

    Sánchez, J. L.; Fraile, R.; de La Madrid, J. L.; de La Fuente, M. T.; Rodríguez, P.; Castro, A.

    1996-09-01

    Between 1986 and 1992 a research project was developed and carried out on hail climatology and the economic repercussions of hail on agriculture in León (northwestern Spain). A target area with an extent of 6825 km2 was defined, within which a network of meteorological observers was established at an average density of 1 per 17 km2. A network of 250 hailpads installed in a grid formation was also laid out over an area of 1000 km2 inside the target area. The frequent occurrence of hailfalls—122 hail days over seven consecutive summers—provided a detailed database and allowed several climatological studies to be made. Crop damage was also closely monitored and quantified. Barley and wheat were selected as crops on which to base an analysis of the relationship between hailfall characteristics and crop damage. As the resistance of plants to hailstones is held to vary according to their physiological state, four different stages of plant growth were defined, beginning with the formation of grain heads.An important conclusion was drawn: the dispersion of percentages of damage always covers the possible variations in resistance caused by the physiological state of the plants. As a result, using only minimal information about hailfall characteristics—namely, the initial reports of observers regarding hailstone size—a working statistical model has successfully been constructed to predict losses to barley and wheat, using data provided by the León hail project.

  19. Variability of snow depth at the plot scale: implications for mean depth estimation and sampling strategies

    Directory of Open Access Journals (Sweden)

    J. I. López-Moreno

    2011-08-01

    Full Text Available Snow depth variability over small distances can affect the representativeness of depth samples taken at the local scale, which are often used to assess the spatial distribution of snow at regional and basin scales. To assess spatial variability at the plot scale, intensive snow depth sampling was conducted during January and April 2009 in 15 plots in the Rio Ésera Valley, central Spanish Pyrenees Mountains. Each plot (10 × 10 m; 100 m2 was subdivided into a grid of 1 m2 squares; sampling at the corners of each square yielded a set of 121 data points that provided an accurate measure of snow depth in the plot (considered as ground truth. The spatial variability of snow depth was then assessed using sampling locations randomly selected within each plot. The plots were highly variable, with coefficients of variation up to 0.25. This indicates that to improve the representativeness of snow depth sampling in a given plot the snow depth measurements should be increased in number and averaged when spatial heterogeneity is substantial.

    Snow depth distributions were simulated at the same plot scale under varying levels of standard deviation and spatial autocorrelation, to enable the effect of each factor on snowpack representativeness to be established. The results showed that the snow depth estimation error increased markedly as the standard deviation increased. The results indicated that in general at least five snow depth measurements should be taken in each plot to ensure that the estimation error is <10 %; this applied even under highly heterogeneous conditions. In terms of the spatial configuration of the measurements, the sampling strategy did not impact on the snow depth estimate under lack of spatial autocorrelation. However, with a high spatial autocorrelation a smaller error was obtained when the distance between measurements was greater.

  20. Ion - biomolecule interactions and radiation damage

    International Nuclear Information System (INIS)

    Schlathoelter, T.

    2004-01-01

    Full text: The biological effects of ionizing radiation in living cells are not a mere result of the direct impact of high energy quanta of radiation. Secondary particles such as low energy electrons, radicals and (multiply charged) ions are formed within the track. The interaction of these secondary particles with biologically relevant molecules is responsible for a large fraction of biological radiation damage to a cell, as well. Singly and multiply charged ions can be of importance as both, primary and secondary particles, and are known to cause severe biological damage. For instance, in heavy ion therapy and proton therapy the pronounced Bragg peak of fast (typically a few 100 MeV/u) ions in biological tissue is utilized. The Bragg peak is located at a depth, where the ions (mostly C q+ or protons) are slowed down to about 100 keV/u and have their maximum linear energy transfer (LET) to the medium. This depth is reasonably well defined and depends on the initial ion kinetic energy. Since the ions are rapidly stopped in this energy range, penetration beyond the Bragg peak is weak and it is thus possible to 'scan' the Bragg peak through a malignant tumour without excessive damage of the surrounding tissue by mere variation of the ion kinetic energy (i.e. the penetration depth). Severe biological damage is almost only possible, when the track of a primary quantum of ionizing radiation crosses the nucleus of a cell. Particularly the induction of double strand breaks of DNA or clustered DNA lesions is potentially lethal or mutagenic. A primary particle interacting with individual molecules within this environment leads to molecular excitation, ionization and fragmentation. In the process, the primary particle looses energy and slow secondary electrons and ions are formed, which might induce further damage. For a deep understanding of biological radiation damage on the level of individual molecules it is thus important to quantify excitation, ionization and

  1. Electrical resistivity tomography and magnetic surveys: applications ...

    African Journals Online (AJOL)

    The magnetic anomaly plots, have mapped the weak zones resulting from subsurface structures and the Euler depth map and 2d magnetic modelling specially depicting the depth of the magnetic sources that are associated with the bedrock. The correlation of the magnetic anomaly plot and 2d inverse model resistivity ...

  2. Evaluation of Tire/Surfacing/Base Contact Stresses and Texture Depth

    Directory of Open Access Journals (Sweden)

    W.J.vdM. Steyn

    2015-03-01

    Full Text Available Tire rolling resistance has a major impact on vehicle fuel consumption. Rolling resistance is the loss of energy due to the interaction between the tire and the pavement surface. This interaction is a complicated combination of stresses and strains which depend on both tire and pavement related factors. These include vehicle speed, vehicle weight, tire material and type, road camber, tire inflation pressure, pavement surfacing texture etc. In this paper the relationship between pavement surface texture depth and tire/surfacing contact stress and area is investigated. Texture depth and tire/surfacing contact stress were measured for a range of tire inflation pressures on five different pavement surfaces. In the analysis the relationship between texture and the generated contact stresses as well as the contact stress between the surfacing and base layer are presented and discussed, and the anticipated effect of these relationships on the rolling resistance of vehicles on the surfacings, and subsequent vehicle fuel economy discussed.

  3. ARX model-based damage sensitive features for structural damage localization using output-only measurements

    Science.gov (United States)

    Roy, Koushik; Bhattacharya, Bishakh; Ray-Chaudhuri, Samit

    2015-08-01

    The study proposes a set of four ARX model (autoregressive model with exogenous input) based damage sensitive features (DSFs) for structural damage detection and localization using the dynamic responses of structures, where the information regarding the input excitation may not be available. In the proposed framework, one of the output responses of a multi-degree-of-freedom system is assumed as the input and the rest are considered as the output. The features are based on ARX model coefficients, Kolmogorov-Smirnov (KS) test statistical distance, and the model residual error. At first, a mathematical formulation is provided to establish the relation between the change in ARX model coefficients and the normalized stiffness of a structure. KS test parameters are then described to show the sensitivity of statistical distance of ARX model residual error with the damage location. The efficiency of the proposed set of DSFs is evaluated by conducting numerical studies involving a shear building and a steel moment-resisting frame. To simulate the damage scenarios in these structures, stiffness degradation of different elements is considered. It is observed from this study that the proposed set of DSFs is good indicator for damage location even in the presence of damping, multiple damages, noise, and parametric uncertainties. The performance of these DSFs is compared with mode shape curvature-based approach for damage localization. An experimental study has also been conducted on a three-dimensional six-storey steel moment frame to understand the performance of these DSFs under real measurement conditions. It has been observed that the proposed set of DSFs can satisfactorily localize damage in the structure.

  4. Radiation damage of organic composite material for fusion magnet

    International Nuclear Information System (INIS)

    Nishijima, S.; Okada, T.

    1991-01-01

    Fusion superconducting magnets are 'series machines' in the sense that the complete magnet may decrease in overall performance when even one component does not deliver the expected performance. Such magnets are often operated under severe conditions, such as radiation environments and those materials which are most prone to damage under such radiation environments demand particular attention. The component most sensitive to radiation damage in the fusion magnet is the organic composite material used for insulation, usually glass fibre reinforced plastic (GFRP). Radiation resistant GFRPs have been developed and these will be discussed in this work, together with other aspects of radiation damage of organic composite materials. (author)

  5. Development and Application of Spatially Parameterized Depth ...

    African Journals Online (AJOL)

    Design rainfall depth is often used to estimate the severity and rarity of floods in areas where flow records are not sufficient enough to warrant direct flood estimation. The design of hydraulic structures on un-gauged streams and creeks, such as bridges, culverts, spillways, water harvesting and flood defense mechanisms ...

  6. Depth Gauge for Liquids Under High Pressure

    Science.gov (United States)

    Zuckerwar, A. J.; Mazel, D. S.

    1987-01-01

    Piezoelectric element mounted in hole drilled in high-pressure plug. Transducer used to measure depth of liquid when pressure in vessel high. New configuration transmits ultrasonic vibration directly into liquid, enhancing signal strength, accuracy, and range, yet piezoelectric element protected from high-pressure liquid.

  7. Effects of tailwater depth on spillway aeration

    African Journals Online (AJOL)

    2011-04-15

    Apr 15, 2011 ... Hydraulic structures such as spillways or weirs with their water-air controlling mechanisms are not only important for their structural properties but also for their effects on downstream ecology. Tailwater depth is an important factor affecting dissolved oxygen transfer and aeration rates of spillways. In this ...

  8. Sampling depth confounds soil acidification outcomes

    Science.gov (United States)

    In the northern Great Plains (NGP) of North America, surface sampling depths of 0-15 or 0-20 cm are suggested for testing soil characteristics such as pH. However, acidification is often most pronounced near the soil surface. Thus, sampling deeper can potentially dilute (increase) pH measurements an...

  9. Depth dependent stress revealed by aftershocks

    Science.gov (United States)

    Narteau, C.; Shebalin, P.

    2017-12-01

    Aftershocks occur in response to perturbations of the state of stress induced either by earthquakes or human activities. Along major strike-slip fault segments of the San Andreas fault system, the time-delay before the onset of the power-law aftershock decay rate (the c-value) varies by three orders of magnitude in the first twenty kilometers below the surface. Despite the influence of the lithostatic stress, there is no continuous change in c-value with respect to depth. Instead, two decay phases are separated by an abrupt increase at an intermediate depth range of 2 to 5 km. This transitional regime is the only one observed in fluid-injection-induced seismic areas. This provides strong evidence for the role of fluid and a porosity reduction mechanism at depth of few kilometers in active fault zones. Aftershock statistics can then be used to predict the evolution the differential shear stress with depth until the brittle-ductile transition is reached.

  10. The Lower Depths on the German Stage

    Directory of Open Access Journals (Sweden)

    Svetlana M. Demkina

    2018-03-01

    Full Text Available This article examines the stage history of M. Gorky’s play The Lower Depths in Germany. The author discusses German stage history of Gorky’s work against the social background and in the context of major artistic tendencies of the 20 th century. Steady interest in Gorky as a playwright in Germany is due to the acute social importance and universality of the problems reflected in his dramas. Bearing on the archive materials of the Gorky Museum, the essay explores interpretations of Gorky’s cult drama The Lower Depths in the work of European stage directors, acclaimed reformers of theatrical art. A significant part of the “Gorky and German Theater” section of the Gorky Museum (IWL RAS is devoted to The Lower Depths. Two series of photographs represent the first German staging of Nachtasyl (German translation of The Lower Depths. The performance of Max Reinhardt and Richard Vallentin in Berlin Kleines Theater on January 10–23, 1903, had great success and good takings. After the premiere, attention to the personality of Gorky in Europe increased; he became the most popular Sovietauthor. When Nazi came to power, they banned Gorky’s work in Germany: he reappeared on the German stage only after the World War II. In the late 1960s, on the wave of Gorky’s centenary (1968, world theatres ran a series of performances based on his plays. The 1970s were marked by a renewal of interest to Gorky the playwright. The Lower Depths was staged in Europe, the USA, and the UK. Both directors and critics perceived Gorky’s dramaturgy in the context of works of his contemporaries — Shaw, Ibsen, Hauptmann, Tolstoy, Chekhov.

  11. Sites of infection by pythium species in rice seedlings and effects of plant age and water depth on disease development.

    Science.gov (United States)

    Chun, S C; Schneider, R W

    1998-12-01

    ABSTRACT Seedling disease, caused primarily by several species of Pythium, is one of the major constraints to water-seeded rice production in Louisiana. The disease, also known as water-mold disease, seed rot, and seedling damping-off, causes stand reductions and growth abnormalities. In severe cases, fields must be replanted, which may result in delayed harvests and reduced yields. To develop more effective disease management tactics including biological control, this study was conducted primarily to determine sites of infection in seeds and seedlings; effect of plant age on susceptibility to P. arrhenomanes, P. myriotylum, and P. dissotocum; and minimum exposure times required for infection and seedling death. In addition, the effect of water depth on seedling disease was investigated. Infection rates of seed embryos were significantly higher than those of endosperms for all three Pythium spp. The development of roots from dry-seeded seedlings was significantly reduced by P. arrhenomanes and P. myriotylum at 5 days after planting compared with that of roots from noninoculated controls. Susceptibility of rice to all three species was sharply reduced within 2 to 6 days after planting, and seedlings were completely resistant at 8 days after planting. There was a steep reduction in emergence through the flood water, relative to the noninoculated control, following 2 to 3 days of exposure to inoculum of P. arrhenomanes and P. myriotylum. In contrast, P. dissotocum was much less virulent and required longer exposure times to cause irreversible seedling damage. Disease incidence was higher when seeds were planted into deeper water, implying that seedlings become resistant after they emerge through the flood water. These results suggest that disease control tactics including flood water management need to be employed for a very short period of time after planting. Also, given that the embryo is the primary site of infection and it is susceptible for only a few days, the

  12. Clinical research of teeth damage from radiotherapy

    International Nuclear Information System (INIS)

    Li Erzhou; Yan Maosheng; Chen Wei; Li Qing

    2003-01-01

    Objective: To analyze various factors inducing teeth damage from radiotherapy and the preventive and treatment methods. Methods: One hundred cases of patients treated by radiotherapy were divided into two groups. In group one there were 60 cases whose teeth were irradiated during treatment; in group two there were 40 cases whose teeth were not irradiated during treatment. Results: The caries incidence was 60% for group one and 15% for group two (P<0.01). By auto-control in 15 patients, the caries incidence on the sick side was obviously higher than that of the healthy side. Hundred percent caries incidence was found in 6 cases who received a dosage of 70 Gy. Conclusion: The authors believe that radiation damage to the teeth is associated with the following factors: 1. The dosage and location of irradiation are closely related to caries incidence; 2. The active dentinoblasts are very sensitive to radiation; 3. Damage to the salivary glands from radiotherapy can result in reduction of salvia and pH value, leading to a high growth rate of Streptococcus mutans. Following preventive measures could be considered in future cases: to apply a caries prevention coating or protective dental crown and TPS, to adjust the dose and time of irradiation, to select conformal radiotherapy technique. The key points for protecting the teeth and salivary gland from caries and damage are protection of the proliferation ability of pulp cells, anti-inflammation, promotion of microcirculation, and strengthening body resistance

  13. Radiation damage in DNA

    International Nuclear Information System (INIS)

    Lafleur, V.

    1978-01-01

    A number of experiments are described with the purpose to obtain a better insight in the chemical nature and the biological significance of radiation-induced damage in DNA, with some emphasis on the significance of alkali-labile sites. It is shown that not only reactions of OH radicals but also of H radicals introduce breaks and other inactivating damage in single-standed phiX174 DNA. It is found that phosphate buffer is very suitable for the study of the reactions of H radicals with DNA, as the H 2 PO 4 - ions convert the hydrated electrons into H radicals. The hydrated electron, which does react with DNA, does not cause a detectable inactivation. (Auth.)

  14. Damage Detection Sensor System for Aerospace and Multiple Applications

    Science.gov (United States)

    Williams, Martha; Lewis, Mark; Gibson, Tracy L.; Lane, John; Medelius, Pedro

    2017-01-01

    NASA has identified structural health monitoring and damage detection and verification as critical needs in multiple technology roadmaps. The sensor systems can be customized for detecting location, damage size, and depth, with velocity options and can be designed for particular environments for monitoring of impact or physical damage to a structure. The damage detection system has been successfully demonstrated in a harsh environment and remote integration tested over 1000 miles apart. Multiple applications includes: Spacecraft and Aircraft; Inflatable, Deployable and Expandable Structures; Space Debris Monitoring; Space Habitats; Military Shelters; Solar Arrays, Smart Garments and Wearables, Extravehicular activity (EVA) suits; Critical Hardware Enclosures; Embedded Composite Structures; and Flexible Hybrid Printed Electronics and Systems. For better implementation and infusion into more flexible architectures, important and improved designs in advancing embedded software and GUI interface, and increasing flexibility, modularity, and configurable capabilities of the system are currently being carried out.

  15. Indentation Damage in Ceramics.

    Science.gov (United States)

    1987-05-30

    resistance have finer grain sizes (cf. A999 and Vistal ). Most interesting, however, is the quantitative correlation between grinding resistance and...a 0.1 3 4.3 2.2 Vistal I a 0.1 20 4.1 1.7 Vistal 1, a 0.1 40 4.6 1.5 Glass-ceramic Pyroceram c - 1.5 2.3 2.0 Macor C _ 13 2.3 1.0 a. Coors Porcelain

  16. Nondestructive damage detection and evaluation technique for seismically damaged structures

    Science.gov (United States)

    Adachi, Yukio; Unjoh, Shigeki; Kondoh, Masuo; Ohsumi, Michio

    1999-02-01

    The development of quantitative damage detection and evaluation technique, and damage detection technique for invisible damages of structures are required according to the lessons from the 1995 Hyogo-ken Nanbu earthquake. In this study, two quantitative damage sensing techniques for highway bridge structures are proposed. One method is to measure the change of vibration characteristics of the bridge structure. According to the damage detection test for damaged bridge column by shaking table test, this method can successfully detect the vibration characteristic change caused by damage progress due to increment excitations. The other method is to use self-diagnosis intelligent materials. According to the reinforced concrete beam specimen test, the second method can detect the damage by rupture of intelligent sensors, such as optical fiber or carbon fiber reinforced plastic rod.

  17. Damage by air pollution

    Energy Technology Data Exchange (ETDEWEB)

    Darley, E.F.; Middleton, J.T.

    1961-01-12

    Photochemical air pollution in the Los Angeles and San Francisco bay areas of California causes damage to the foliage of many plants and reduces the growth of a variety of glasshouse-grown crops. Not only is commercial flower production adversely affected, but a wide variety of critically controlled plant experiments conducted by several research institutions also are hampered. Moderate to severe plant damage has been experienced during the past several years for all but a few weeks in the winter months in standard glasshouses at the University of California at Riverside. Plants in glasshouses can be protected from photochemical air pollution by passing all of the air entering the house through activated carbon filters. The phytotoxic products of the photochemical reactions are ozone, the recently described peroxyacetyl nitrite PAN and the oxidants, as yet unidentified, produced by ozone-olefin reactions. Although ethylene occurs in the photochemical air pollution complex and is damaging to a variety of plants, it is not removed by activated carbon. A combination of filter-cooler unit is described which filters phytotoxicants from the air in greenhouses.

  18. Depth profiling of metal overlayers on organic substrates with cluster SIMS.

    Science.gov (United States)

    Shen, Kan; Mao, Dan; Garrison, Barbara J; Wucher, Andreas; Winograd, Nicholas

    2013-11-05

    Molecular depth profiling of organic thin films by erosion with energetic cluster ion beams is a unique aspect of secondary ion mass spectrometry (SIMS) experiments. Although depth profiles of complex multilayer organic structures can be acquired with little damage accumulation and with depth resolution of gold layer of 1.4 to 3.5 nm deposited either on top of or sandwiched within a cholesterol thin film matrix which is several hundred nanometers thick. For these systems, the results show that by erosion with a 40 keV C60(+) beam, reliable depth profiles can always be acquired as indicated by the presence of a steady state molecular ion signal. During the erosion process, however, gold atoms from the gold overlayer are implanted into the cholesterol matrix beneath it, resulting in a reduced sputter yield, an increase in the amount of cholesterol fragmentation and an increase in the thickness of the cluster ion-induced altered layer. The results also show that the effects of the metal film on the organic substrate are independent of the gold film thickness once the film thickness exceeds 1.4 nm. In general, this model study provides mechanistic insight into the depth profiling of heterogeneous thin film structures and offers a possible path for improving the quality of the depth profiles by employing low energy atomic ion sputtering in the region of the metal layer.

  19. Effect of squat depth and barbell load on relative muscular effort in squatting.

    Science.gov (United States)

    Bryanton, Megan A; Kennedy, Michael D; Carey, Jason P; Chiu, Loren Z F

    2012-10-01

    Resistance training is used to develop muscular strength and hypertrophy. Large muscle forces, in relation to the muscle's maximum force-generating ability, are required to elicit these adaptations. Previous biomechanical analyses of multi-joint resistance exercises provide estimates of muscle force but not relative muscular effort (RME). The purpose of this investigation was to determine the RME during the squat exercise. Specifically, the effects of barbell load and squat depth on hip extensor, knee extensor, and ankle plantar flexor RME were examined. Ten strength-trained women performed squats (50-90% 1 repetition maximum) in a motion analysis laboratory to determine hip extensor, knee extensor, and ankle plantar flexor net joint moment (NJM). Maximum isometric strength in relation to joint angle for these muscle groups was also determined. Relative muscular effect was determined as the ratio of NJM to maximum voluntary torque matched for joint angle. Barbell load and squat depth had significant interaction effects on hip extensor, knee extensor, and ankle plantar flexor RME (p barbell load, whereas the opposite was found for the ankle plantar flexors. Both greater squat depth and barbell load increased hip extensor RME. These data suggest that training for the knee extensors can be performed with low relative intensities but require a deep squat depth. Heavier barbell loads are required to train the hip extensors and ankle plantar flexors. In designing resistance training programs with multi-joint exercises, how external factors influence RME of different muscle groups should be considered to meet training objectives.

  20. The use of waveform shapes to automatically determine earthquake focal depth

    Science.gov (United States)

    Sipkin, S.A.

    2000-01-01

    Earthquake focal depth is an important parameter for rapidly determining probable damage caused by a large earthquake. In addition, it is significant both for discriminating between natural events and explosions and for discriminating between tsunamigenic and nontsunamigenic earthquakes. For the purpose of notifying emergency management and disaster relief organizations as well as issuing tsunami warnings, potential time delays in determining source parameters are particularly detrimental. We present a method for determining earthquake focal depth that is well suited for implementation in an automated system that utilizes the wealth of broadband teleseismic data that is now available in real time from the global seismograph networks. This method uses waveform shapes to determine focal depth and is demonstrated to be valid for events with magnitudes as low as approximately 5.5.

  1. Investigation of the shallow depth explosions

    International Nuclear Information System (INIS)

    Kamegai, M.

    1976-01-01

    An investigation of the nuclear explosions at shallow depth is made. A combination of an explosion code and an effects code proves to be an excellent tool for this study. A numerical simulation of ''Johnie Boy'' shows that the energy coupling to the air takes place in two stages; first by a rising mound, and then by a vented source. The thermal effects are examined for a 1 kt source at three depths of burial. The ''mushroom effect'' leaves a hot radiative plasma in the upper level and cold materials in the lower region of the debris. The temperature and the energy density of the debris can give an upper limit on the thermal output

  2. Ion beam analysis with monolayer depth resolution

    Science.gov (United States)

    Carstanjen, H. D.

    1998-03-01

    The paper is concerned with the analysis of surfaces and near-surface layers with monolayer depth resolution by means of high resolution Rutherford backscattering (HRBS) and elastic recoil detection (HERDA) of ions with an energy of a few MeV, in combination with an electrostatic spectrometer. With this instrument, which has recently been set up at the 6 MV Pelletron accelerator of the Max-Planck-Institut für Metallforschung in Stuttgart, depth resolutions of 0.1 nm are obtained in HRBS and 0.3 nm in HERDA experiments. This paper gives a short outline of the design and performance of the spectrometer followed by various examples of applications. These comprise examples showing the analyzing power of the instrument, the analysis of an X-ray mirror by HRBS, the study of the initial oxidation of surfaces of aluminum single crystals by HERDA and recent results concerning charge exchange in ion backscattering.

  3. DNA Brick Crystals with Prescribed Depth

    Science.gov (United States)

    Ke, Yonggang; Ong, Luvena L.; Sun, Wei; Song, Jie; Dong, Mingdong; Shih, William M.; Yin, Peng

    2014-01-01

    We describe a general framework for constructing two-dimensional crystals with prescribed depth and sophisticated three-dimensional features. These crystals may serve as scaffolds for the precise spatial arrangements of functional materials for diverse applications. The crystals are self-assembled from single-stranded DNA components called DNA bricks. We demonstrate the experimental construction of DNA brick crystals that can grow to micron-size in the lateral dimensions with precisely controlled depth up to 80 nanometers. They can be designed to display user-specified sophisticated three-dimensional nanoscale features, such as continuous or discontinuous cavities and channels, and to pack DNA helices at parallel and perpendicular angles relative to the plane of the crystals. PMID:25343605

  4. Weak layer fracture: facets and depth hoar

    Directory of Open Access Journals (Sweden)

    I. Reiweger

    2013-09-01

    Full Text Available Understanding failure initiation within weak snow layers is essential for modeling and predicting dry-snow slab avalanches. We therefore performed laboratory experiments with snow samples containing a weak layer consisting of either faceted crystals or depth hoar. During these experiments the samples were loaded with different loading rates and at various tilt angles until fracture. The strength of the samples decreased with increasing loading rate and increasing tilt angle. Additionally, we took pictures of the side of four samples with a high-speed video camera and calculated the displacement using a particle image velocimetry (PIV algorithm. The fracture process within the weak layer could thus be observed in detail. Catastrophic failure started due to a shear fracture just above the interface between the depth hoar layer and the underlying crust.

  5. Military Robotics and Collateral Damage

    National Research Council Canada - National Science Library

    Kott, Robert Douglass ;Alexander

    2004-01-01

    .... Such concepts raise important questions in terms of their impact on collateral damage. In a broader context, western warfare in general places a continuously growing emphasis on issues of collateral damage...

  6. Grounding Damage to Conventional Vessels

    DEFF Research Database (Denmark)

    Lützen, Marie; Simonsen, Bo Cerup

    2003-01-01

    The present paper is concerned with rational design of conventional vessels with regard to bottom damage generated in grounding accidents. The aim of the work described here is to improve the design basis, primarily through analysis of new statistical data for grounding damage. The current...... regulations for design of bottom compartment layout with regard to grounding damages are largely based on statistical damage data. New and updated damage statistics holding 930 grounding accident records has been investigated. The bottom damage statistics is compared to current regulations for the bottom...... compartment layout, in an attempt to determine the probability of exceeding the design requirements. Distributions for the extent of damage, such as damage length, height and width, are determined. Furthermore, attempts are made at identifying the governing grounding scenarios and deriving a formula...

  7. Neutron radiation damage studies on silicon detectors

    International Nuclear Information System (INIS)

    Li, Zheng; Chen, W.; Kraner, H.W.

    1990-10-01

    Effects of neutron radiation on electrical properties of Si detectors have been studied. At high neutron fluence (Φ n ≥ 10 12 n/cm 2 ), C-V characteristics of detectors with high resistivities (ρ ≥ 1 kΩ-cm) become frequency dependent. A two-trap level model describing this frequency dependent effect is proposed. Room temperature anneal of neutron damaged (at LN 2 temperature) detectors shows three anneal stages, while only two anneal stages were observed in elevated temperature anneal. 19 refs., 14 figs

  8. Indentation Depth Dependent Mechanical Behavior in Polymers

    OpenAIRE

    Alisafaei, Farid; Han, Chung-Souk

    2015-01-01

    Various experimental studies have revealed size dependent deformation of materials at micro and submicron length scales. Among different experimental methods, nanoindentation testing is arguably the most commonly applied method of studying size effect in various materials where increases in the hardness with decreasing indentation depth are usually related to indentation size effects. Such indentation size effects have been observed in both metals and polymers. While the indentation size effe...

  9. Partial-depth lock-release flows

    Science.gov (United States)

    Khodkar, M. A.; Nasr-Azadani, M. M.; Meiburg, E.

    2017-06-01

    We extend the vorticity-based modeling concept for stratified flows introduced by Borden and Meiburg [Z. Borden and E. Meiburg, J. Fluid Mech. 726, R1 (2013), 10.1017/jfm.2013.239] to unsteady flow fields that cannot be rendered quasisteady by a change of reference frames. Towards this end, we formulate a differential control volume balance for the conservation of mass and vorticity in the fully unsteady parts of the flow, which we refer to as the differential vorticity model. We furthermore show that with the additional assumptions of locally uniform parallel flow within each layer, the unsteady vorticity modeling approach reproduces the familiar two-layer shallow-water equations. To evaluate its accuracy, we then apply the vorticity model approach to partial-depth lock-release flows. Consistent with the shallow water analysis of Rottman and Simpson [J. W. Rottman and J. E. Simpson, J. Fluid Mech. 135, 95 (1983), 10.1017/S0022112083002979], the vorticity model demonstrates the formation of a quasisteady gravity current front, a fully unsteady expansion wave, and a propagating bore that is present only if the lock depth exceeds half the channel height. When this bore forms, it travels with a velocity that does not depend on the lock height and the interface behind it is always at half the channel depth. We demonstrate that such a bore is energy conserving. The differential vorticity model gives predictions for the height and velocity of the gravity current and the bore, as well as for the propagation velocities of the edges of the expansion fan, as a function of the lock height. All of these predictions are seen to be in good agreement with the direct numerical simulation data and, where available, with experimental results. An energy analysis shows lock-release flows to be energy conserving only for the case of a full lock, whereas they are always dissipative for partial-depth locks.

  10. Mobile Variable Depth Sampling System Design Study

    Energy Technology Data Exchange (ETDEWEB)

    BOGER, R.M.

    2000-08-25

    A design study is presented for a mobile, variable depth sampling system (MVDSS) that will support the treatment and immobilization of Hanford LAW and HLW. The sampler can be deployed in a 4-inch tank riser and has a design that is based on requirements identified in the Level 2 Specification (latest revision). The waste feed sequence for the MVDSS is based on Phase 1, Case 3S6 waste feed sequence. Technical information is also presented that supports the design study.

  11. Mobile Variable Depth Sampling System Design Study

    International Nuclear Information System (INIS)

    BOGER, R.M.

    2000-01-01

    A design study is presented for a mobile, variable depth sampling system (MVDSS) that will support the treatment and immobilization of Hanford LAW and HLW. The sampler can be deployed in a 4-inch tank riser and has a design that is based on requirements identified in the Level 2 Specification (latest revision). The waste feed sequence for the MVDSS is based on Phase 1, Case 3S6 waste feed sequence. Technical information is also presented that supports the design study

  12. [Measurement of the depth of anaesthesia].

    Science.gov (United States)

    Schmidt, G N; Müller, J; Bischoff, P

    2008-01-01

    One of the most important mandates of the anaesthesiologist is to control the depth of anaesthesia. An unsolved problem is that a straight definition of the depth of anaesthesia does not exist. Concerning this it is rational to separate hypnosis from analgesia, from muscle relaxation and from block of cardiovascular reactions. Clinical surrogate parameters such as blood pressure and heart rate are not well-suited for a valid statement about the depth of hypnosis. To answer this question the brain has become the focus of interest as the target of anaesthesia. It is possible to visualize the brain's electrical activity from anelectroencephalogram (EEG). The validity of the spontaneous EEG as an anesthetic depth monitor is limited by the multiphasic activity, especially when anaesthesia is induced (excitation) and in deep anaesthesia (burst suppression). Recently, various commercial monitoring systems have been introduced to solve this problem. These monitoring systems use different interpretations of the EEG or auditory-evoked potentials (AEP). These derived and calculated variables have no pure physiological basis. For that reason a profound knowledge of the algorithms and a validation of the monitoring systems is an indispensable prerequisite prior to their routine clinical use. For the currently available monitoring systems various studies have been reported. At this time it is important to know that the actual available monitors can only value the sedation and not the other components of anaesthesia. For example, they cannot predict if a patient will react to a painful stimulus or not. In the future it would be desirable to develop parameters which allow an estimate of the other components of anaesthesia in addition to the presently available monitoring systems to estimate sedation and muscle relaxation. These could be sensoric-evoked potentials to estimate analgesia and AEPs for the detection of awareness.

  13. MR determination of neonatal spinal canal depth

    Energy Technology Data Exchange (ETDEWEB)

    Arthurs, Owen, E-mail: owenarthurs@uk2.net [Centre for Cardiovascular MR, Great Ormond Street Hospital for Children, London WC1N 3JH (United Kingdom); Thayyil, Sudhin, E-mail: s.thayyil@ucl.ac.uk [Academic Neonatology, Institute for Women' s Health, London WC1E 6AU (United Kingdom); Wade, Angie, E-mail: a.wade@ucl.ac.uk [Centre for Paediatric Epidemiology and Biostatistics, UCL Institute of Child Health, London (United Kingdom); Chong, W.K., E-mail: Kling.Chong@gosh.nhs.uk [Paediatric Neuroradiology, Great Ormond Street Hospital for Children, London (United Kingdom); Sebire, Neil J., E-mail: Neil.Sebire@gosh.nhs.uk [Histopathology, Great Ormond Street Hospital for Children, London WC1E 6AU (United Kingdom); Taylor, Andrew M., E-mail: a.taylor76@ucl.ac.uk [Centre for Cardiovascular MR, Cardiorespiratory Unit, Great Ormond Street Hospital for Children and UCL Institute of Cardiovascular Science, London WC1E 6AU (United Kingdom)

    2012-08-15

    Objectives: Lumbar punctures (LPs) are frequently performed in neonates and often result in traumatic haemorrhagic taps. Knowledge of the distance from the skin to the middle of the spinal canal (mid-spinal canal depth - MSCD) may reduce the incidence of traumatic taps, but there is little data in extremely premature or low birth weight neonates. Here, we determined the spinal canal depth at post-mortem in perinatal deaths using magnetic resonance imaging (MRI). Patients and methods: Spinal canal depth was measured in 78 post-mortem foetuses and perinatal cases (mean gestation 26 weeks; mean weight 1.04 kg) at the L3/L4 inter-vertebral space at post-mortem MRI. Both anterior (ASCD) and posterior (PSCD) spinal canal depth were measured; MSCD was calculated and modelled against weight and gestational age. Results: ASCD and PSCD (mm) correlated significantly with weight and gestational age (all r > 0.8). A simple linear model MSCD (mm) = 3 Multiplication-Sign Weight (kg) + 5 was the best fit, identifying an SCD value within the correct range for 87.2% (68/78) (95% CI (78.0, 92.9%)) cases. Gestational age did not add significantly to the predictive value of the model. Conclusion: There is a significant correlation between MSCD and body weight at post-mortem MRI in foetuses and perinatal deaths. If this association holds in preterm neonates, use of the formula MSCD (mm) = 3 Multiplication-Sign Weight (kg) + 5 could result in fewer traumatic LPs in this population.

  14. Hot Jupiter Variability in Eclipse Depth

    OpenAIRE

    Rauscher, Emily; Menou, Kristen; Cho, James Y-K.; Seager, Sara; Hansen, Brad

    2006-01-01

    Physical conditions in the atmospheres of tidally-locked, slowly-rotating hot Jupiters correspond to dynamical circulation regimes with Rhines scales and Rossby deformation radii comparable to the planetary radii. Consequently, the large spatial scales of moving atmospheric structures could generate significant photospheric variability. Here, we estimate the level of thermal infrared variability expected in successive secondary eclipse depths, according to hot Jupiter turbulent ``shallow-laye...

  15. Operational Based Vision Assessment Research: Depth Perception

    Science.gov (United States)

    2014-11-01

    1920) reported two cases of crashes during landing due to binocular disorders of the pilot. In the first event, the pilot suffered from paralysis of...of fatigue and sleep deprivation on performance. The USAF in particular has specific policies addressing, for example, microtropia, that may become...chronic sleep deprivation on depth perception. Sleep deprivation is known to result in an increase in pupillary response latency and a decrease in

  16. Effect of ion implantation on thermal shock resistance of magnesia and glass

    International Nuclear Information System (INIS)

    Gurarie, V.N.; Williams, J.S.; Watt, A.J.

    1995-01-01

    Monocrystals of magnesia together with glass samples have been subjected to ion implantation prior to thermal shock testing in an impulse plasma of continuously varied intensity. Measurements of the separation between fragments have been used to estimate the surface temperature. Fracture and deformation characteristics of the surface layer are measured in ion implanted and unimplanted samples using optical and scanning electron microscopy. Implantation-induced near-surface damage is analysed by ion channeling using 2 MeV He + ions. Ion implantation is shown to modify the near-surface structure of magnesia samples by introducing damage, which makes crack initiation easier under thermal stresses. The fracture threshold and maximum crack density are shifted towards the lower temperature range. Ion implanted MgO crystals show a ten fold increase in surface crack density. An increased crack density results in a decreased degree of damage characterised by the depth of crack penetration. The thermal stress resistance parameter of glass samples is increased at relatively small doses and decreased at higher doses. The results suggest that crack density and the degree of fracture damage in brittle ceramics operating under thermal shock conditions can be effectively controlled by ion implantation which provides crack initiating defects in the near-surface region. 23 refs., 7 figs

  17. Low-Depth Quantum Simulation of Materials

    Directory of Open Access Journals (Sweden)

    Ryan Babbush

    2018-03-01

    Full Text Available Quantum simulation of the electronic structure problem is one of the most researched applications of quantum computing. The majority of quantum algorithms for this problem encode the wavefunction using N Gaussian orbitals, leading to Hamiltonians with O(N^{4} second-quantized terms. We avoid this overhead and extend methods to condensed phase materials by utilizing a dual form of the plane wave basis which diagonalizes the potential operator, leading to a Hamiltonian representation with O(N^{2} second-quantized terms. Using this representation, we can implement single Trotter steps of the Hamiltonians with linear gate depth on a planar lattice. Properties of the basis allow us to deploy Trotter- and Taylor-series-based simulations with respective circuit depths of O(N^{7/2} and O[over ˜](N^{8/3} for fixed charge densities. Variational algorithms also require significantly fewer measurements in this basis, ameliorating a primary challenge of that approach. While our approach applies to the simulation of arbitrary electronic structure problems, the basis sets explored in this work will be most practical for treating periodic systems, such as crystalline materials, in the near term. We conclude with a proposal to simulate the uniform electron gas (jellium using a low-depth variational ansatz realizable on near-term quantum devices. From these results, we identify simulations of low-density jellium as a promising first setting to explore quantum supremacy in electronic structure.

  18. Modeling detector response for neutron depth profiling

    Energy Technology Data Exchange (ETDEWEB)

    Coakley, K.J. [National Inst. of Standards and Technology, Boulder, CO (United States); Downing, R.G. [National Inst. of Standards and Technology, Gaithersburg, MD (United States); Lamaze, G.P. [National Inst. of Standards and Technology, Gaithersburg, MD (United States); Hofsaess, H.C. [Konstanz Univ. (Germany); Biegel, J. [Konstanz Univ. (Germany); Ronning, C. [Konstanz Univ. (Germany)

    1995-11-21

    In Neutron Depth Profiling (NDP), inferences about the concentration profile of an element in a material are based on the energy spectrum of charged particles emitted due to specific nuclear reactions. The detector response function relates the depth of emission to the expected energy spectrum of the emitted particles. Here, the detector response function is modeled for arbitrary source and detector geometries based on a model for the stopping power of the material, energy straggling, multiple scattering and random detector measurement error. At the NIST Cold Neutron Research Facility, a NDP spectrum was collected for a diamond-like carbon (DLC) sample doped with boron. A vertical slit was placed in front of the detector for collimation. Based on the computed detector response function, a model for the depth profile of boron is fit to the observed NDP spectrum. The contribution of straggling to overall variability was increased by multiplying the Bohr Model prediction by a ramp factor. The adjustable parameter in the ramp was selected to give the best agreement between the fitted profile and the expected shape of the profile. The expected shape is determined from experimental process control measurements. (orig.).

  19. Relationship Depth and Associative Stigma of Disability

    Directory of Open Access Journals (Sweden)

    Katherine Nieweglowski

    2017-08-01

    Full Text Available Family, friends and acquaintances of people with disabilities may be viewed or treated differently by the public due to their association with a stigmatized person. Previous research finds that the public are more willing to engage in relationships with people with physical disability than with mental illness. In addition, attitudes towards associating with people with disabilities has been found to vary by depth of the chosen relationship. The current study sought to examine the connections between relationship depth (friend/romantic partner/acquaintance, disability type (physical/psychiatric and associative stigma. Adult participants (N=345 were randomly presented with vignettes varying in relationship depth and disability type via an online survey platform. Analyses found no differences in associative stigma between physical and psychiatric disabilities. Participants viewed the vignette actor Rachel as socially warmer when she was a friend or romantic partner of a person with a disability than when she was an acquaintance. Participants rated Rachel as different from themselves when she was romantically involved with the person with disability and were more willing to engage socially with Rachel when she befriended the person with disability rather than when she was a mere acquaintance.

  20. Reduction of fatigue loads on jacket substructure through blade design optimization for multimegawatt wind turbines at 50 m water depths

    DEFF Research Database (Denmark)

    NJOMO WANDJI, Wilfried; Pavese, Christian; Natarajan, Anand

    2016-01-01

    This paper addresses the reduction of the fore-aft damage equivalent moment at the tower base for multi-megawatt offshore wind turbines mounted on jacket type substructures at 50 m water depths. The study investigates blade design optimization of a reference 10 MW wind turbine under standard wind...... on the efficient design of other components such as the constituents of the nacelle....

  1. Lightning Damage of Carbon Fiber/Epoxy Laminates with Interlayers Modified by Nickel-Coated Multi-Walled Carbon Nanotubes

    Science.gov (United States)

    Dong, Qi; Wan, Guoshun; Xu, Yongzheng; Guo, Yunli; Du, Tianxiang; Yi, Xiaosu; Jia, Yuxi

    2017-12-01

    The numerical model of carbon fiber reinforced polymer (CFRP) laminates with electrically modified interlayers subjected to lightning strike is constructed through finite element simulation, in which both intra-laminar and inter-laminar lightning damages are considered by means of coupled electrical-thermal-pyrolytic analysis method. Then the lightning damage extents including the damage volume and maximum damage depth are investigated. The results reveal that the simulated lightning damages could be qualitatively compared to the experimental counterparts of CFRP laminates with interlayers modified by nickel-coated multi-walled carbon nanotubes (Ni-MWCNTs). With higher electrical conductivity of modified interlayer and more amount of modified interlayers, both damage volume and maximum damage depth are reduced. This work provides an effective guidance to the anti-lightning optimization of CFRP laminates.

  2. Fatigue Damage in Wood

    DEFF Research Database (Denmark)

    Clorius, Christian Odin; Pedersen, Martin Bo Uhre; Hoffmeyer, Preben

    1996-01-01

    An investigation of fatigue failure in wood subjected to load cycles in compression parallel to grain is presented. Fatigue failure is found to depend both on the total time under load and on the number of cycles.Recent accelerated fatigue research on wood is reviewed, and a discrepancy between...... to 10 Hz are used. The number of cycles to failure is found to be a poor measure of the fatigue performance of wood. Creep, maximum strain, stiffness and work are monitored throughout the fatigue tests. Accumulated creep is suggested identified with damage and a correlation between stiffness reduction...

  3. Contextualizing aquired brain damage

    DEFF Research Database (Denmark)

    Nielsen, Charlotte Marie Bisgaard

    2014-01-01

    Contextualizing aquired brain damage Traditional approaches study ’communicational problems’ often in a discourse of disabledness or deficitness. With an ontology of communcation as something unique and a presupposed uniqueness of each one of us, how could an integrational approach (Integrational...... for people with aquired brain injuries will be presented and comparatively discussed in a traditional versus an integrational perspective. Preliminary results and considerations on ”methods” and ”participation” from this study will be presented along with an overview of the project's empirical data....

  4. Radiation damage in graphite

    CERN Document Server

    Simmons, John Harry Walrond

    1965-01-01

    Nuclear Energy, Volume 102: Radiation Damage in Graphite provides a general account of the effects of irradiation on graphite. This book presents valuable work on the structure of the defects produced in graphite crystals by irradiation. Organized into eight chapters, this volume begins with an overview of the description of the methods of manufacturing graphite and of its physical properties. This text then presents details of the method of setting up a scale of irradiation dose. Other chapters consider the effect of irradiation at a given temperature on a physical property of graphite. This

  5. Tokamak ARC damage

    Energy Technology Data Exchange (ETDEWEB)

    Murray, J.G.; Gorker, G.E.

    1985-01-01

    Tokamak fusion reactors will have large plasma currents of approximately 10 MA with hundreds of megajoules stored in the magnetic fields. When a major plasma instability occurs, the disruption of the plasma current induces voltage in the adjacent conducting structures, giving rise to large transient currents. The induced voltages may be sufficiently high to cause arcing across sector gaps or from one protruding component to another. This report reviews a tokamak arcing scenario and provides guidelines for designing tokamaks to minimize the possibility of arc damage.

  6. Tokamak ARC damage

    International Nuclear Information System (INIS)

    Murray, J.G.; Gorker, G.E.

    1985-01-01

    Tokamak fusion reactors will have large plasma currents of approximately 10 MA with hundreds of megajoules stored in the magnetic fields. When a major plasma instability occurs, the disruption of the plasma current induces voltage in the adjacent conducting structures, giving rise to large transient currents. The induced voltages may be sufficiently high to cause arcing across sector gaps or from one protruding component to another. This report reviews a tokamak arcing scenario and provides guidelines for designing tokamaks to minimize the possibility of arc damage

  7. Sodium intake modifies the negative prognostic value of renal damage prior to treatment with ACE inhibitors on proteinuria induced by adriamycin

    NARCIS (Netherlands)

    Kramer, Andrea B.; Bos, Hendrik; van Goor, Harry; Navis, Gerjan J.

    2006-01-01

    Background: Antiproteinuric treatment by ACE inhibition (ACEi) provides renoprotection. However, resistance to antiproteinuric intervention occurs frequently, resulting in progressive renal damage. The extent of renal damage prior to treatment with ACEi reversely correlates with the antiproteinuric

  8. Responses of tropical maize landraces to damage by Chilo partellus ...

    African Journals Online (AJOL)

    Munyiri

    2013-03-13

    Mar 13, 2013 ... stem lodging and grain yield were measured and a selection index computed. GUAT 1050 was the most resistant with an index of 0.56, while BRAZ 2179 was the most susceptible with an index of 1.66. Ear characteristics were negatively correlated with damage parameters. The principal component biplot.

  9. Industrial emission damages and forest - damages of forest and protection by forest

    Energy Technology Data Exchange (ETDEWEB)

    Olschowy, G.

    1966-01-01

    Forests may suffer acute or chronic damage from industrial emissions in the form of gases and inert or toxic dusts. Sulfur dioxide is the most harmful pollutant. The response of the exposed vegetation depends on many factors, e.g., species and age. Gases penetrate trees through the small openings in the leaves, and may cause total or partial leaf necrosis depending on concentration. Dust particles with diameters above 10 micron are deposited on leaves, keeping out up to 50% of the sunlight. Soluble dust components dissolved by precipitation may penetrate the leaves. Thus, forests are more resistant in winter than in summer. Forests and tree species needed by industry, in particular, suffer severe damage. Industrial emissions may also have secondary effects, causing the proliferation of certain parasites, e.g., armillaria mellea. Forests as protective greenbelts can be planted to separate industrial from urban areas. Such plantings in minimum widths of 10-30 m also show filtration and protective effects against radioactive contamination. Suitable smoke-resistant species should be selected for new plantings. Conifers are more sensitive to emissions than leafy varieties and resistance is lower in rapidly growing trees. Investigations were carried out on the resistance of certain species to nitrogen dioxide and SO/sub 2/. Genetic resistance properties can be obtained by hybridizing and by artificial exposure to emission effects, although completely smoke-resistant specimens cannot be developed due to the specific physical and chemical properties of the protoplasm. Specifications for non-toxic dusts in general and for industrial areas, and emission threshold values for NO/sub 2/, chlorine, hydrogen sulfide, and SO/sub 2/ are reviewed. 30 references.

  10. Radiation damage in components

    International Nuclear Information System (INIS)

    Takano, Tomehachi

    1977-01-01

    The performance change of typical capacitors and resistors in electronic components by Co-60 γ-irradiation from the 1320 Ci source was examined in the range of 10 5 to 10 8 R. Specifically, the characteristic change during irradiation and the recovery after irradiation were continuously observed. The capacity change is +2.4% at maximum in ceramic and metallized paper capacitors, and -2.4% at maximum in mylar and paper capacitors. It is also +-0.4% at maximum in mica and polystyrene capacitors. Some of these capacitors showed the recovery of the capacity change, but the others did not. Dielectric loss varied by 15% at larger dose in some capacitors, and the recovery was not observed. While, the insulation resistance of the resistors of 10 15 Ω or more lowered to 10 13 Ω or less after 10 to 30 sec. irradiation, but recovered soon nearly to the initial values after irradiation was interrupted. The resistance change of carbon film resistors is about 0.2 to 2%, and recovered to the initial values in 100 hours after irradiation. The resistance change of composition resistors is large over the range of -13 to +35%, besides, no sign of recovery was seen. In carbon film resistors, the surface insulated type indicated far better results which are assumed to be caused by the selection of element materials and the forming of coating materials. (Wakatsuki, Y.)

  11. Steady State Shift Damage Localization

    DEFF Research Database (Denmark)

    Sekjær, Claus; Bull, Thomas; Markvart, Morten Kusk

    2017-01-01

    The steady state shift damage localization (S3DL) method localizes structural deterioration, manifested as either a mass or stiffness perturbation, by interrogating the damage-induced change in the steady state vibration response with damage patterns cast from a theoretical model. Damage is, thus...... the required accuracy when examining complex structures, an extensive amount of degrees of freedom (DOF) must often be utilized. Since the interrogation matrix for each damage pattern depends on the size of the system matrices constituting the FE-model, the computational time quickly becomes of first...

  12. Thoracic damage control surgery.

    Science.gov (United States)

    Gonçalves, Roberto; Saad, Roberto

    2016-01-01

    The damage control surgery came up with the philosophy of applying essential maneuvers to control bleeding and abdominal contamination in trauma patients who are within the limits of their physiological reserves. This concept was extended to thoracic injuries, where relatively simple maneuvers can shorten operative time of in extremis patients. This article aims to revise the various damage control techniques in thoracic organs that must be known to the surgeon engaged in emergency care. RESUMO A cirurgia de controle de danos surgiu com a filosofia de se aplicar manobras essenciais para controle de sangramento e contaminação abdominal, em doentes traumatizados, nos limites de suas reservas fisiológicas. Este conceito se estendeu para as lesões torácicas, onde manobras relativamente simples, podem abreviar o tempo operatório de doentes in extremis. Este artigo tem como objetivo, revisar as diversas técnicas de controle de dano em órgãos torácicos, que devem ser de conhecimento do cirurgião que atua na emergência.

  13. Improving Focal Depth Estimates: Studies of Depth Phase Detection at Regional Distances

    Science.gov (United States)

    Stroujkova, A.; Reiter, D. T.; Shumway, R. H.

    2006-12-01

    The accurate estimation of the depth of small, regionally recorded events continues to be an important and difficult explosion monitoring research problem. Depth phases (free surface reflections) are the primary tool that seismologists use to constrain the depth of a seismic event. When depth phases from an event are detected, an accurate source depth is easily found by using the delay times of the depth phases relative to the P wave and a velocity profile near the source. Cepstral techniques, including cepstral F-statistics, represent a class of methods designed for the depth-phase detection and identification; however, they offer only a moderate level of success at epicentral distances less than 15°. This is due to complexities in the Pn coda, which can lead to numerous false detections in addition to the true phase detection. Therefore, cepstral methods cannot be used independently to reliably identify depth phases. Other evidence, such as apparent velocities, amplitudes and frequency content, must be used to confirm whether the phase is truly a depth phase. In this study we used a variety of array methods to estimate apparent phase velocities and arrival azimuths, including beam-forming, semblance analysis, MUltiple SIgnal Classification (MUSIC) (e.g., Schmidt, 1979), and cross-correlation (e.g., Cansi, 1995; Tibuleac and Herrin, 1997). To facilitate the processing and comparison of results, we developed a MATLAB-based processing tool, which allows application of all of these techniques (i.e., augmented cepstral processing) in a single environment. The main objective of this research was to combine the results of three focal-depth estimation techniques and their associated standard errors into a statistically valid unified depth estimate. The three techniques include: 1. Direct focal depth estimate from the depth-phase arrival times picked via augmented cepstral processing. 2. Hypocenter location from direct and surface-reflected arrivals observed on sparse

  14. New tsunami damage functions developed in the framework of SCHEMA project: application to European-Mediterranean coasts

    Directory of Open Access Journals (Sweden)

    N. Valencia

    2011-10-01

    Full Text Available In the framework of the European SCenarios for tsunami Hazard-induced Emergencies MAnagement (SCHEMA project (www.schemaproject.org, we empirically developed new tsunami damage functions to be used for quantifying the potential tsunami damage to buildings along European-Mediterranean coasts.

    Since no sufficient post-tsunami observations exist in the Mediterranean areas, we based our work on data collected by several authors in Banda Aceh (Indonesia after the 2004 Indian Ocean tsunami. Obviously, special attention has been paid in focusing on Indonesian buildings which present similarities (in structure, construction material, number of storeys with the building typologies typical of the European-Mediterranean areas.

    An important part of the work consisted in analyzing, merging, and interpolating the post-disaster observations published by three independent teams in order to obtain the spatial distribution of flow depths necessary to link the flow-depth hazard parameter to the damage level observed on buildings. Then we developed fragility curves (showing the cumulative probability to have, for each flow depth, a damage level equal-to or greater-than a given threshold and damage curves (giving the expected damage level for different classes of buildings. It appears that damage curves based on the weighted mean damage level and the maximum flow depth are the most appropriate for producing, under GIS, expected damage maps for different tsunami scenarios.

  15. Cross-country transferability of multi-variable damage models

    Science.gov (United States)

    Wagenaar, Dennis; Lüdtke, Stefan; Kreibich, Heidi; Bouwer, Laurens

    2017-04-01

    Flood damage assessment is often done with simple damage curves based only on flood water depth. Additionally, damage models are often transferred in space and time, e.g. from region to region or from one flood event to another. Validation has shown that depth-damage curve estimates are associated with high uncertainties, particularly when applied in regions outside the area where the data for curve development was collected. Recently, progress has been made with multi-variable damage models created with data-mining techniques, i.e. Bayesian Networks and random forest. However, it is still unknown to what extent and under which conditions model transfers are possible and reliable. Model validations in different countries will provide valuable insights into the transferability of multi-variable damage models. In this study we compare multi-variable models developed on basis of flood damage datasets from Germany as well as from The Netherlands. Data from several German floods was collected using computer aided telephone interviews. Data from the 1993 Meuse flood in the Netherlands is available, based on compensations paid by the government. The Bayesian network and random forest based models are applied and validated in both countries on basis of the individual datasets. A major challenge was the harmonization of the variables between both datasets due to factors like differences in variable definitions, and regional and temporal differences in flood hazard and exposure characteristics. Results of model validations and comparisons in both countries are discussed, particularly in respect to encountered challenges and possible solutions for an improvement of model transferability.

  16. Kinect Fusion improvement using depth camera calibration

    Directory of Open Access Journals (Sweden)

    D. Pagliari

    2014-06-01

    Full Text Available Scene's 3D modelling, gesture recognition and motion tracking are fields in rapid and continuous development which have caused growing demand on interactivity in video-game and e-entertainment market. Starting from the idea of creating a sensor that allows users to play without having to hold any remote controller, the Microsoft Kinect device was created. The Kinect has always attract researchers in different fields, from robotics to Computer Vision (CV and biomedical engineering as well as third-party communities that have released several Software Development Kit (SDK versions for Kinect in order to use it not only as a game device but as measurement system. Microsoft Kinect Fusion control libraries (firstly released in March 2013 allow using the device as a 3D scanning and produce meshed polygonal of a static scene just moving the Kinect around. A drawback of this sensor is the geometric quality of the delivered data and the low repeatability. For this reason the authors carried out some investigation in order to evaluate the accuracy and repeatability of the depth measured delivered by the Kinect. The paper will present a throughout calibration analysis of the Kinect imaging sensor, with the aim of establishing the accuracy and precision of the delivered information: a straightforward calibration of the depth sensor in presented and then the 3D data are correct accordingly. Integrating the depth correction algorithm and correcting the IR camera interior and exterior orientation parameters, the Fusion Libraries are corrected and a new reconstruction software is created to produce more accurate models.

  17. Kinect Fusion improvement using depth camera calibration

    Science.gov (United States)

    Pagliari, D.; Menna, F.; Roncella, R.; Remondino, F.; Pinto, L.

    2014-06-01

    Scene's 3D modelling, gesture recognition and motion tracking are fields in rapid and continuous development which have caused growing demand on interactivity in video-game and e-entertainment market. Starting from the idea of creating a sensor that allows users to play without having to hold any remote controller, the Microsoft Kinect device was created. The Kinect has always attract researchers in different fields, from robotics to Computer Vision (CV) and biomedical engineering as well as third-party communities that have released several Software Development Kit (SDK) versions for Kinect in order to use it not only as a game device but as measurement system. Microsoft Kinect Fusion control libraries (firstly released in March 2013) allow using the device as a 3D scanning and produce meshed polygonal of a static scene just moving the Kinect around. A drawback of this sensor is the geometric quality of the delivered data and the low repeatability. For this reason the authors carried out some investigation in order to evaluate the accuracy and repeatability of the depth measured delivered by the Kinect. The paper will present a throughout calibration analysis of the Kinect imaging sensor, with the aim of establishing the accuracy and precision of the delivered information: a straightforward calibration of the depth sensor in presented and then the 3D data are correct accordingly. Integrating the depth correction algorithm and correcting the IR camera interior and exterior orientation parameters, the Fusion Libraries are corrected and a new reconstruction software is created to produce more accurate models.

  18. Study of the disorder by means of the superconducting penetration depth

    International Nuclear Information System (INIS)

    Arce, R.D.

    1982-11-01

    Measurements of the weak magnetic field penetration depth in the amorphous superconducting systems Lasub(1-x) Msub(x), being M = Cu, Al, Ga and Au, and in the Zr 70 Cu 30 system are presented. Measurements of the sample geometrical factors and the flux expulsion between the lowest temperature reached and the critical temperature, allows the determination of zero temperature penetration depth. The measurement of the flux expulsion as a function of temperature is used to determine the temperature dependence of penetration depth, used to evaluate the temperature dependence superconducting gap. The magnetization measurements have been made using an rf-SQUID. The evolution of the penetration depth with annealing is studied in the La 70 Cu 30 and Zr 70 Cu 30 systems. Measurements of the electrical resistivity and the critical temperature are used to verify the Gorkov equations in these materials. The variation of the penetration depth with annealing suggests that a metallurgical phase separation occurs within the submicrometer range. Penetration depth measurement is a tool to detect this type of phase separation in high kappa materials. (M.E.L.) [es

  19. Radiation damage measurements on CZT drift strip detectors

    DEFF Research Database (Denmark)

    Kuvvetli, Irfan; Budtz-Jørgensen, Carl; Korsbech, Uffe C C

    2003-01-01

    from 2 x 10(8) to 60 x 10(8) p(+)/cm(2). Even for the highest fluences, which had a dramatic effect on the spectroscopic performance, we were able to recover the detectors after an appropriate annealing procedure. The radiation damage was studied as a function of depth inside the detector material...... with the proton dose. The radiation contribution to the electron trapping was found to obey the following relation: (mutau(e)(-1))(rad) = (2.5+/-0.2) x 10(-7) x Phi (V/cm)(2) with the proton fluence, Phi in p(+)/cm(2). The trapping depth dependence, however, did not agree well with the damage profile calculated...

  20. Computation of conjugate depths in cubic-shape open channels ...

    African Journals Online (AJOL)

    Determining conjugate depths for a given discharge and initial depth requires the solution of a cubic equation for the conjugate depth and there are currently two approaches to avoiding this difficulty in general. One approach is to iteratively try different depths until one is obtained which gives the same value of the ...

  1. Cognitive psychology and depth psychology backgrounds

    International Nuclear Information System (INIS)

    Fritzsche, A.F.

    1986-01-01

    The sixth chapter gives an insight into the risk perception process which is highly determined by emotions, and, thus, deals with the psychological backgrounds of both the conscious cognitive and the subconscious intuitive realms of the human psyche. The chapter deals with the formation of opinion and the origination of an attitude towards an issue; cognitive-psychological patterns of thinking from the field of risk perception; the question of man's rationality; pertinent aspects of group behaviour; depth psychological backgrounds of the fear of technology; the collective subconscious; nuclear energy as a preferred object of projection for various psychological problems of modern man. (HSCH) [de

  2. Aerosol optical depth over Lauder, New Zealand

    Science.gov (United States)

    Liley, J. B.; Forgan, B. W.

    2009-04-01

    Aerosol optical depths (AOD) measured over Lauder in Central Otago, New Zealand in 1996-1997, and continuously since 1999, are amongst the lowest observed worldwide. The Lauder measurements show a seasonal cycle in AOD with a winter minimum and summer local maximum, and there is a springtime peak that is probably due to biomass burning. The wavelength dependence of AOD suggests a relatively stable size distribution but smaller average particle size in spring. Lack of correlation with surface humidity below 90% RH, in both AOD and wavelength dependence, may constrain the likely composition of the aerosol. There was a downward but insignificant trend in mean AOD over the measurement period.

  3. Carbon depth distributions for lunar soil breccias

    International Nuclear Information System (INIS)

    Spear, R.H.

    1978-01-01

    A technique is described which permits determination of the depth distribution of carbon within the first few microns of the surfaces of lunar samples. It is based upon measurement of the energy spectrum of protons from the reaction 12 C(d,p 0 ) 13 C at a bombarding energy of 1.07 MeV. Results are presented for soil breccias from the Apollo 11, 16 and 17 missions, and for a soil sample from the Apollo 14 mission. The Apollo 16 (highland) samples show surface concentrations which ae systematically lower than those for the mare samples

  4. In-depth disinfection of acrylic resins.

    Science.gov (United States)

    Chau, V B; Saunders, T R; Pimsler, M; Elfring, D R

    1995-09-01

    This study demonstrated that bacteria penetrate three kinds of dental acrylic resin after a short time period. Samples of acrylic resin were contaminated with a variety of bacteria and were then placed in three different disinfecting solutions as directed by the manufacturers. After the specific dilution and immersion time, cultures were made from the resin samples. The only effective disinfectant was a 0.525% solution of sodium hypochlorite at a 10-minute immersion. It disinfected not only the surfaces but also the bacteria that penetrated the surfaces to a depth of 3 mm.

  5. EPA Region 1 - Valley Depth in Meters

    Science.gov (United States)

    Raster of the Depth in meters of EPA-delimited Valleys in Region 1.Valleys (areas that are lower than their neighbors) were extracted from a Digital Elevation Model (USGS, 30m) by finding the local average elevation, subtracting the actual elevation from the average, and selecting areas where the actual elevation was below the average. The landscape was sampled at seven scales (circles of 1, 2, 4, 7, 11, 16, and 22 km radius) to take into account the diversity of valley shapes and sizes. Areas selected in at least four scales were designated as valleys.

  6. Effects of cavitation on damage calculations in ion-irradiated P7 alloy

    International Nuclear Information System (INIS)

    Sindelar, R.L.; Farrens, S.N.; Kulcinski, G.L.

    1985-01-01

    The purpose of this study is to investigate the effect of voids on the depth-dependent damage energy in ion-irradiated metals. Corrections to the dose at the swelling peak will be used to obtain the swelling rate of ion-irradiated 316-type stainless steels. Samples of the P7 alloy were ion-irradiated to four fluence levels up to a peak dose level of 100 dpa at 650 0 C. The depth-dependent void parameters extracted in cross section were used to model the effect of voids on the depth-dependent damage produced during 14 MeV nickel ion irradiation. An increase in the range of damage produced from the original foil surface for the target containing voids was modeled as a first-order correction to the damage profile. A second-order effect, void straggling, was shown to cause a time-dependent decrease in the damage rate at the peak swelling depth. Corrections applied to the dose at the peak swelling depth yield swelling rates approaching 0.7%/dpa

  7. Adriamycin resistance and radiation response

    International Nuclear Information System (INIS)

    Belli, J.A.; Harris, J.R.

    1979-01-01

    Mammalian cells (V79) in culture developed resistance to Adriamycin during continuous exposure to low levels of drug. This resistance was accompanied by change in x-ray survival properties which, in turn, depended upon the isolation of subpopulations from resistant sub lines. These changes in x-ray survival properties were characterized by reduced D/sub Q/ values and a decrease in the D/sub O/. However, these changes were not observed together in the same cell sub line. Adriamycin-resistant cells did not appear to be radiation damage repair deficient. Other phenotypic changes (cell morphology, DNA content and chromosome number) suggested mutational events coincident with the development of Adriamycin resistance

  8. High bit depth infrared image compression via low bit depth codecs

    Science.gov (United States)

    Belyaev, Evgeny; Mantel, Claire; Forchhammer, Søren

    2017-08-01

    Future infrared remote sensing systems, such as monitoring of the Earth's environment by satellites, infrastructure inspection by unmanned airborne vehicles etc., will require 16 bit depth infrared images to be compressed and stored or transmitted for further analysis. Such systems are equipped with low power embedded platforms where image or video data is compressed by a hardware block called the video processing unit (VPU). However, in many cases using two 8-bit VPUs can provide advantages compared with using higher bit depth image compression directly. We propose to compress 16 bit depth images via 8 bit depth codecs in the following way. First, an input 16 bit depth image is mapped into 8 bit depth images, e.g., the first image contains only the most significant bytes (MSB image) and the second one contains only the least significant bytes (LSB image). Then each image is compressed by an image or video codec with 8 bits per pixel input format. We analyze how the compression parameters for both MSB and LSB images should be chosen to provide the maximum objective quality for a given compression ratio. Finally, we apply the proposed infrared image compression method utilizing JPEG and H.264/AVC codecs, which are usually available in efficient implementations, and compare their rate-distortion performance with JPEG2000, JPEG-XT and H.265/HEVC codecs supporting direct compression of infrared images in 16 bit depth format. A preliminary result shows that two 8 bit H.264/AVC codecs can achieve similar result as 16 bit HEVC codec.

  9. Advanced Mitigation Process (AMP) for Improving Laser Damage Threshold of Fused Silica Optics

    Science.gov (United States)

    Ye, Xin; Huang, Jin; Liu, Hongjie; Geng, Feng; Sun, Laixi; Jiang, Xiaodong; Wu, Weidong; Qiao, Liang; Zu, Xiaotao; Zheng, Wanguo

    2016-08-01

    The laser damage precursors in subsurface of fused silica (e.g. photosensitive impurities, scratches and redeposited silica compounds) were mitigated by mineral acid leaching and HF etching with multi-frequency ultrasonic agitation, respectively. The comparison of scratches morphology after static etching and high-frequency ultrasonic agitation etching was devoted in our case. And comparison of laser induce damage resistance of scratched and non-scratched fused silica surfaces after HF etching with high-frequency ultrasonic agitation were also investigated in this study. The global laser induce damage resistance was increased significantly after the laser damage precursors were mitigated in this case. The redeposition of reaction produce was avoided by involving multi-frequency ultrasonic and chemical leaching process. These methods made the increase of laser damage threshold more stable. In addition, there is no scratch related damage initiations found on the samples which were treated by Advanced Mitigation Process.

  10. Tree diversity reduces pest damage in mature forests across Europe.

    Science.gov (United States)

    Guyot, Virginie; Castagneyrol, Bastien; Vialatte, Aude; Deconchat, Marc; Jactel, Hervé

    2016-04-01

    Forest pest damage is expected to increase with global change. Tree diversity could mitigate this impact, but unambiguous demonstration of the diversity-resistance relationship is lacking in semi-natural mature forests. We used a network of 208 forest plots sampled along two orthogonal gradients of increasing tree species richness and latitudes to assess total tree defoliation in Europe. We found a positive relationship between tree species richness and resistance to insect herbivores: overall damage to broadleaved species significantly decreased with the number of tree species in mature forests. This pattern of associational resistance was frequently observed across tree species and countries, irrespective of their climate. These findings confirm the greater potential of mixed forests to face future biotic disturbances in a changing world. © 2016 The Authors.

  11. Modelling the response of the Cased Hole Formation Resistivity tool in order to determine the depth of gas hydrate dissociation during the thermal test in the JAPEX/JNOC/GSC et al. Mallik 5L-38 gas hydrate production research well

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, B. [Schlumberger-Doll Research, Ridgefield, CT (United States); Dubourg, I. [Etudes et Productions Schlumberger, Clamart (France); Collett, T.S. [United States Geological Survey, Denver, CO (United States); Lewis, R.E. [Schlumberger Oilfield Services, Oklahoma City, OK (United States)

    2005-07-01

    The physical response of a gas hydrate deposit to various advanced production methods was field tested at the JAPEX/JNOC/GSC et al. Mallik 5L-38 gas hydrate production research well. The annular radius of gas hydrate dissociation that occurred around the wellbore during the thermal test in the Mallik 5L-38 well was determined using iterative forward modelling of Cased Hole Formation Resistivity (CHFR) well logs. According to modeling results, the radius of gas hydrate dissociation had large local variations and was far from uniform. A comparison of CHFR modeling results and measured gas volumes at the surface suggest that most of the gas produced during the thermal test in the Mallik 5L-38 well was accurately measured at the surface. It was concluded that the CHFR modelling method is a promising method to evaluate future gas hydrate dissociation in single-wells.

  12. In-field experiment of electro-hydraulic tillage depth draft-position mixed control on tractor

    Science.gov (United States)

    Han, Jiangyi; Xia, Changgao; Shang, Gaogao; Gao, Xiang

    2017-12-01

    The soil condition and condition of the plow affect the tillage resistance and the maximum traction of tractor. In order to improve the adaptability of tractor tillage depth control, a multi-parameter control strategy is proposed that included tillage depth target, draft force aim and draft–position mixed ratio. In the strategy, the resistance coefficient was used to adjust the draft force target. Then, based on a JINMA1204 tractor, the electro-hydraulic hitch prototype is constructed that could set control parameters.. The fuzzy controller of draft–position mixed control is designed. After that, in-field experiments of position control was carried on, and the result of experiment shows the error of tillage depth was less than ±20mm. The experiment of draft-position control shown that the draft force and the tillage depth could be adjust by multi-parameter such as tillage depth, resistance coefficient and draft-position mixed coefficient. So that, the multi-parameter control strategy could improve the adaptability of tillage depth control in various soils and plow condition.

  13. Damage scenarios and an onboard support system for damaged ships

    Directory of Open Access Journals (Sweden)

    Choi Jin

    2014-06-01

    Full Text Available Although a safety assessment of damaged ships, which considers environmental conditions such as waves and wind, is important in both the design and operation phases of ships, in Korea, rules or guidelines to conduct such assessments are not yet developed. However, NATO and European maritime societies have developed guidelines for a safety assessment. Therefore, it is required to develop rules or guidelines for safety assessments such as the Naval Ship Code (NSC of NATO. Before the safety assessment of a damaged ship can be performed, the available damage scenarios must be developed and the safety assessment criteria must be established. In this paper, the parameters related to damage by accidents are identified and categorized when developing damage scenarios. The need for damage safety assessment criteria is discussed, and an example is presented. In addition, a concept and specifications for the DB-based supporting system, which is used in the operation phases, are proposed.

  14. Antimicrobial Resistance

    Science.gov (United States)

    ... least 10 countries (Australia, Austria, Canada, France, Japan, Norway, Slovenia, South Africa, Sweden and the United Kingdom ... plan Global report on surveillance Country situation analysis Policy to combat antimicrobial resistance More on antimicrobial resistance ...

  15. Cellular Responses to Cisplatin-Induced DNA Damage

    Directory of Open Access Journals (Sweden)

    Alakananda Basu

    2010-01-01

    Full Text Available Cisplatin is one of the most effective anticancer agents widely used in the treatment of solid tumors. It is generally considered as a cytotoxic drug which kills cancer cells by damaging DNA and inhibiting DNA synthesis. How cells respond to cisplatin-induced DNA damage plays a critical role in deciding cisplatin sensitivity. Cisplatin-induced DNA damage activates various signaling pathways to prevent or promote cell death. This paper summarizes our current understandings regarding the mechanisms by which cisplatin induces cell death and the bases of cisplatin resistance. We have discussed various steps, including the entry of cisplatin inside cells, DNA repair, drug detoxification, DNA damage response, and regulation of cisplatin-induced apoptosis by protein kinases. An understanding of how various signaling pathways regulate cisplatin-induced cell death should aid in the development of more effective therapeutic strategies for the treatment of cancer.

  16. Optimal depth-based regional frequency analysis

    Directory of Open Access Journals (Sweden)

    H. Wazneh

    2013-06-01

    Full Text Available Classical methods of regional frequency analysis (RFA of hydrological variables face two drawbacks: (1 the restriction to a particular region which can lead to a loss of some information and (2 the definition of a region that generates a border effect. To reduce the impact of these drawbacks on regional modeling performance, an iterative method was proposed recently, based on the statistical notion of the depth function and a weight function φ. This depth-based RFA (DBRFA approach was shown to be superior to traditional approaches in terms of flexibility, generality and performance. The main difficulty of the DBRFA approach is the optimal choice of the weight function ϕ (e.g., φ minimizing estimation errors. In order to avoid a subjective choice and naïve selection procedures of φ, the aim of the present paper is to propose an algorithm-based procedure to optimize the DBRFA and automate the choice of ϕ according to objective performance criteria. This procedure is applied to estimate flood quantiles in three different regions in North America. One of the findings from the application is that the optimal weight function depends on the considered region and can also quantify the region's homogeneity. By comparing the DBRFA to the canonical correlation analysis (CCA method, results show that the DBRFA approach leads to better performances both in terms of relative bias and mean square error.

  17. Optimal depth-based regional frequency analysis

    Science.gov (United States)

    Wazneh, H.; Chebana, F.; Ouarda, T. B. M. J.

    2013-06-01

    Classical methods of regional frequency analysis (RFA) of hydrological variables face two drawbacks: (1) the restriction to a particular region which can lead to a loss of some information and (2) the definition of a region that generates a border effect. To reduce the impact of these drawbacks on regional modeling performance, an iterative method was proposed recently, based on the statistical notion of the depth function and a weight function φ. This depth-based RFA (DBRFA) approach was shown to be superior to traditional approaches in terms of flexibility, generality and performance. The main difficulty of the DBRFA approach is the optimal choice of the weight function ϕ (e.g., φ minimizing estimation errors). In order to avoid a subjective choice and naïve selection procedures of φ, the aim of the present paper is to propose an algorithm-based procedure to optimize the DBRFA and automate the choice of ϕ according to objective performance criteria. This procedure is applied to estimate flood quantiles in three different regions in North America. One of the findings from the application is that the optimal weight function depends on the considered region and can also quantify the region's homogeneity. By comparing the DBRFA to the canonical correlation analysis (CCA) method, results show that the DBRFA approach leads to better performances both in terms of relative bias and mean square error.

  18. Coding In-depth Semistructured Interviews

    DEFF Research Database (Denmark)

    Campbell, John L.; Quincy, Charles; Osserman, Jordan

    2013-01-01

    Many social science studies are based on coded in-depth semistructured interview transcripts. But researchers rarely report or discuss coding reliability in this work. Nor is there much literature on the subject for this type of data. This article presents a procedure for developing coding scheme...... useful for situations where a single knowledgeable coder will code all the transcripts once the coding scheme has been established. This approach can also be used with other types of qualitative data and in other circumstances.......Many social science studies are based on coded in-depth semistructured interview transcripts. But researchers rarely report or discuss coding reliability in this work. Nor is there much literature on the subject for this type of data. This article presents a procedure for developing coding schemes...... for such data. It involves standardizing the units of text on which coders work and then improving the coding scheme’s discriminant capability (i.e., reducing coding errors) to an acceptable point as indicated by measures of either intercoder reliability or intercoder agreement. This approach is especially...

  19. Effective depth of spermatogonia in man

    International Nuclear Information System (INIS)

    Casey, R.; Jewett, M.A.S.; Facey, R.A.

    1982-01-01

    Dosimetry for sperm cells irradiated by high-energy betas requires precise knowledge of the effective depth of the spermatogonia, and hence the thickness of overlying tissues (scrotum plus tunics)), because beta dose rate changes very rapidly with depth. Measurements were made on 25 volunteers and surgical patients by mechanical caliper during surgery (2), by ultrasound (14), or by both (9), all at 20 deg C air temperature. The tunica albuginea (TA) measured 0.1 mm. The surgical results (TA excluded) were 2.0 mm, σ = 0.3 mm (n = 11). The ultrasound results (TA included) were 2.2 mm,σ = 0.6 mm (n = 23). There was no correlation of scrotal thickness with age (24-83 years) and only a very weak correlation (r = 0.3) with body mass. There was no decrease in scrotal thickness (at 20 deg C) with further warming but there was an increase (to 3.3 mm from 2.3 mm) with chilling before measurement. Ultrasound is shown to be valid for such measurements. (author)

  20. Inflammation, oxidative DNA damage, and carcinogenesis

    International Nuclear Information System (INIS)

    Lewis, J.G.; Adams, D.O.

    1987-01-01

    Inflammation has long been associated with carcinogenesis, especially in the promotion phase. The mechanism of action of the potent inflammatory agent and skin promoter 12-tetradecanoyl phorbol-13-acetate (TPA) is unknown. It is though that TPA selectively enhances the growth of initiated cells, and during this process, initiated cells progress to the preneoplastic state and eventually to the malignant phenotype. The authors and others have proposed that TPA may work, in part, by inciting inflammation and stimulating inflammatory cells to release powerful oxidants which then induce DNA damage in epidermal cells. Macrophages cocultured with target cells and TPA induce oxidized thymine bases in the target cells. This process is inhibited by both catalase and inhibitors of lipoxygenases, suggesting the involvement of both H 2 O 2 and oxidized lipid products. In vivo studies demonstrated that SENCAR mice, which are sensitive to promotion by TPA, have a more intense inflammatory reaction in skin that C57LB/6 mice, which are resistant to promotion by TPA. In addition, macrophages from SENCAR mice release more H 2 O 2 and metabolites of AA, and induce more oxidative DNA damage in cocultured cells than macrophages from C57LB/6 mice. These data support the hypothesis that inflammation and the release of genotoxic oxidants may be one mechanism whereby initiated cells receive further genetic insults. They also further complicate risk assessment by suggesting that some environmental agents may work indirectly by subverting host systems to induce damage rather than maintaining homeostasis

  1. Toughness and damage susceptibility in human cortical bone is proportional to mechanical inhomogeneity at the osteonal-level.

    Science.gov (United States)

    Katsamenis, Orestis L; Jenkins, Thomas; Thurner, Philipp J

    2015-07-01

    Limitations associated with current clinical fracture risk assessment tools highlight the need for increased understanding of the fracture mechanisms of the bone and, ideally, a means of assessing this in vivo. Being a multi-layered hierarchical structure, the overall properties of the bone are dictated by its structural and compositional properties over multiple length scales. In this study, we investigate the osteonal-, micro- and tissue-level mechanical behaviour of cortical bone tissue samples from young and elderly donors through atomic force microscope (AFM) cantilever-based nanoindentation, reference point microindentation (RPI) and fracture toughness experiments respectively. We demonstrate that bone's fracture toughness and crack growth resistance at the tissue-level are significantly correlated to damage susceptibility at the micro-level, and mechanical inhomogeneity between lamellae and interlamellar areas at the osteonal-level. In more detail, reduced nanoelasticity inhomogeneity of lamellar/interlamellar layers within the osteons correlated to increased indentation depth at the micro-level and an overall reduction in crack-growth toughness and fracture toughness of the tissue. Our data also suggest that deterioration of bone's mechanical properties is expressed concurrently at these three levels, and that mechanical inhomogeneity between the principal structural units of the cortical tissue holds a key role on bone's toughness behaviour. We hypothesise that the reduction in nanoelasticity inhomogeneity is--at least to some extent--responsible for the inability of the microstructure to effectively adapt to the applied load, e.g. by redistributing strains, in a non-catastrophic manner preventing damage formation and propagation. Our hypothesis is further supported by synchrotron radiation micro-computed tomography (SRμCT) data, which show that failure of tougher bone specimens is governed by increased deflection of the crack path and broadly spread

  2. Brittle fracture damage around the Alpine Fault, New Zealand

    Science.gov (United States)

    Williams, J. N.; Toy, V.; Smith, S. A. F.; Boulton, C. J.; Massiot, C.; Mcnamara, D. D.

    2017-12-01

    We use field and drill-core samples to characterize macro- to micro-scale brittle fracture networks within the hanging-wall of New Zealand's Alpine Fault, an active plate-boundary fault that is approaching the end of its seismic cycle. Fracture density in the hanging-wall is roughly constant for distances of up to 500 m from the principal slip zone gouges (PSZs). Fractures >160 m from the PSZs are typically open and parallel to the regional mylonitic foliation or host rock schistosity, and likely formed as unloading joints during rapid exhumation of the hanging-wall at shallow depths. Fractures within c. 160 m of the PSZs are broadly oriented shear-fractures filled with gouge or cataclasite, and are interpreted to constitute the hanging-wall damage zone of the Alpine Fault. This is comparable to the 60-200 m wide "geophysical damage zone" estimated from low seismic wave velocities surrounding the Alpine Fault. Veins are pervasive within the c. 20 m-thick hanging-wall cataclasites and are most commonly filled by calcite, chlorite, muscovite and K-feldspar. Notably, there is a set of intragranular clast-hosted veins, as well as a younger set of veins that cross-cut both clasts and cataclasite matrix. The intragranular veins formed prior to cataclasis or during synchronous cataclasis and calcite-silicate mineralisation. Broad estimates for the depth of vein formation indicate that the cataclasites formed a c. 20 m wide actively deforming zone at depths of c. 4-8 km. Conversely, the cross-cutting veins are interpreted to represent off-fault damage within relatively indurated cataclasites following slip localization onto the <10 cm wide smectite-bearing PSZ gouges at depths of <4 km. Our observations therefore highlight a strong depth-dependence of the width of the actively deforming zone within the brittle seismogenic crust around the Alpine Fault.

  3. Z-depth integration: a new technique for manipulating z-depth properties in composited scenes

    Science.gov (United States)

    Steckel, Kayla; Whittinghill, David

    2014-02-01

    This paper presents a new technique in the production pipeline of asset creation for virtual environments called Z-Depth Integration (ZeDI). ZeDI is intended to reduce the time required to place elements at the appropriate z-depth within a scene. Though ZeDI is intended for use primarily in two-dimensional scene composition, depth-dependent "flat" animated objects are often critical elements of augmented and virtual reality applications (AR/VR). ZeDI is derived from "deep image compositing", a capacity implemented within the OpenEXR file format. In order to trick the human eye into perceiving overlapping scene elements as being in front of or behind one another, the developer must manually manipulate which pixels of an element are visible in relation to other objects embedded within the environment's image sequence. ZeDI improves on this process by providing a means for interacting with procedurally extracted z-depth data from a virtual environment scene. By streamlining the process of defining objects' depth characteristics, it is expected that the time and energy required for developers to create compelling AR/VR scenes will be reduced. In the proof of concept presented in this manuscript, ZeDI is implemented for pre-rendered virtual scene construction via an AfterEffects software plug-in.

  4. Multiscale analysis of depth images from natural scenes: Scaling in the depth of the woods

    International Nuclear Information System (INIS)

    Chéné, Yann; Belin, Étienne; Rousseau, David; Chapeau-Blondeau, François

    2013-01-01

    We analyze an ensemble of images from outdoor natural scenes and consisting of pairs of a standard gray-level luminance image associated with a depth image of the same scene, delivered by a recently introduced low-cost sensor for joint imaging of depth and luminance. We specially focus on statistical analysis of multiscale and fractal properties in the natural images. Two methodologies are implemented for this purpose, and examining the distribution of contrast upon coarse-graining at increasing scales, and the orientationally averaged power spectrum tied to spatial frequencies. Both methodologies confirm, on another independent dataset here, the presence of fractal scale invariance in the luminance natural images, as previously reported. Both methodologies here also reveal the presence of fractal scale invariance in the novel data formed by depth images from natural scenes. The multiscale analysis is confronted on luminance images and on the novel depth images together with an analysis of their statistical correlation. The results, especially the new results on the multiscale analysis of depth images, consolidate the importance and extend the multiplicity of aspects of self-similarity and fractal scale invariance properties observable in the constitution of images from natural scenes. Such results are useful to better understanding and modeling of the (multiscale) structure of images from natural scenes, with relevance to image processing algorithms and to visual perception. The approach also contains potentialities for the fractal characterization of three-dimensional natural structures and their interaction with light

  5. Drug Resistance

    Science.gov (United States)

    ... infected with a drug-resistant strain of HIV. Drug-resistance testing results are used to decide which HIV medicines to include in a person’s first HIV regimen. After treatment is started, drug-resistance testing is repeated if ...

  6. Cloning and characterization of NBS-LRR resistance gene ...

    African Journals Online (AJOL)

    Nendran) cultivar. C6 was expressed only in resistant cultivar not in susceptible one. But there was no change in the expression of C2 and C3 in both resistant and susceptible cultivars. These results indicate that in depth study on C1, and C5 RGAs will be helpful for further improvement of P. coffeae resistance in banana.

  7. Comparison of boron and neon damage effects in boron ion-implanted resistors

    International Nuclear Information System (INIS)

    MacIver, B.A.

    1975-01-01

    Boron and neon damage implants were used in fabricating integrated-circuit resistors in silicon. Resistor properties were studied as functions of damaging ion species and dose. Sheet resistances in the 10 000 Ω/square range were obtained with low temperature and voltage sensitivities and d.c. isolation. (author)

  8. Benthic habitat and fish assemblage structure from shallow to mesophotic depths in a storm-impacted marine protected area

    Science.gov (United States)

    Abesamis, Rene A.; Langlois, Tim; Birt, Matthew; Thillainath, Emma; Bucol, Abner A.; Arceo, Hazel O.; Russ, Garry R.

    2018-03-01

    Baseline ecological studies of mesophotic coral ecosystems are lacking in the equatorial Indo-West Pacific region where coral reefs are highly threatened by anthropogenic and climate-induced disturbances. Here, we used baited remote underwater video to describe benthic habitat and fish assemblage structure from 10 to 80 m depth at Apo Island, a well-managed marine protected area in the Philippines. We conducted surveys 2 yr after two storms (in 2011 and 2012) caused severe damage to shallow coral communities within the no-take marine reserve (NTMR) of Apo Island, which led to declines in fish populations that had built up over three decades. We found that hard coral cover was restricted to fished area not impacted by storms. Benthic cover at mesophotic depths (> 30 m) was dominated by sand/rubble and rock (dead coral) with low cover of soft corals, sponges and macroalgae. Storm damage appeared to have reached the deepest limit of the fringing reef (40 m) and reduced variability in benthic structure within the NTMR. Species richness and/or abundance of most trophic groups of fish declined with increasing depth regardless of storm damage. There were differences in taxonomic and trophic structure and degree of targeting by fisheries between shallow and mesophotic fish assemblages. Threatened shark species and a fish species previously unreported in the Philippines were recorded at mesophotic depths. Our findings provide a first glimpse of the benthic and fish assemblage structure of Philippine coral reef ecosystems across a wide depth gradient. This work also underscores how a combination of limited coral reef development at mesophotic depths close to shallow reefs and severe habitat loss caused by storms would result in minimal depth refuge for reef fish populations.

  9. The influence of rock strength on erosion processes and river morphology in central Arizona: the accumulation of damage from macro-abrasion

    Science.gov (United States)

    Larimer, J. E.; Yanites, B.

    2017-12-01

    River morphology reflects the interaction between the driving forces of erosion and the resisting properties of bedrock that limit erosion. Changes in energy dissipation at the riverbed are indicated by differences in channel geometry. To erode at the same rate, stronger rocks require more energy, and thus, an adjustment in river slope or width is necessary to accomplish this work. Therefore, morphological changes should reflect differences in the rock strength properties most relevant to the dominant erosion process. We investigate this hypothesis by comparing river morphology and rock-strength properties of reaches subject to different processes. Streams in Prescott National Forest, AZ expose bedrock through a variety of lithologies, which provides a natural testing ground. Measurements include channel geometry, surface P-wave velocity, fracture spacing, and bedload grain size distribution of 150 individual reaches, as well as 260 tensile and compressive-strength tests and P-wave velocity of cores up to depths of 20 cm. Based on observations, we infer that fluvial erosion processes in this region generally fall into three domains: (1) grain by grain abrasion, (2) progressive failure by damage accumulation due to bedload impacts or `macro-abrasion', and (3) `plucking' of jointed rocks. We focus analyses on the accumulation of damage from sub-critical stresses that weakens the surface of the bedrock, potentially leading to macroscopic fractures, fatigue, and rock failure. This plays a dual role facilitating the ease with which abrasion removes material and increasing the rate of production of pluck-able particles. We estimate the `damage potential' of saltating bedload using water discharge time-series, sediment transport models and grain size distribution. To determine the resistance to damage accumulation among different rocks, we measure the evolution of damage in core samples under uniaxial loading using strain energy and inherent flaw theory. Preliminary

  10. A typology of loss and damage perspectives

    Science.gov (United States)

    Boyd, Emily; James, Rachel A.; Jones, Richard G.; Young, Hannah R.; Otto, Friederike E. L.

    2017-10-01

    Loss and Damage (L&D) has been the subject of contentious debate in international climate policy for several decades. Recently, formal mechanisms on L&D have been established, but arguably through unclear language. This ambiguity is politically important, but researchers and practitioners require clearer understandings of L&D. Here we report on the first in-depth empirical study of actor perspectives, including interviews with 38 key stakeholders in research, practice, and policy. We find points of agreement and also important distinctions in terms of: the relationship between L&D and adaptation, the emphasis on avoiding versus addressing L&D, the relevance of anthropogenic climate change, and the role of justice. A typology of four perspectives is identified, with different implications for research priorities and actions to address L&D. This typology enables improved understanding of existing perspectives and so has potential to facilitate more transparent discussion of the options available to address L&D.

  11. 3008 Damage of Reinforced Concrete Frame Structures during the Iran-Qayen (Ardakul) Earthquake of May 10, 1997

    OpenAIRE

    塩原, 等; 小谷, 俊介; Reza, ALAGHEBANDIAN; Hitoshi, SHIOHARA; Shunsuke, OTANI; 東京大学; 東京大学; 東京大学; Depart. of Architecture The University of Tokyo Ph.D. Candidate Member of JCI; Depart. of Architecture The University of Tokyo Assoc. Prof. Dr. of Eng. Member of JCI; Depart. of Architecture The University of Tokyo Prof. Ph.D. Dr. of Eng. Member of JCI

    1998-01-01

    A large number of engineered as well as non-engineered buildings were severely damaged and collapsed during a magnitude 7.1 earthquake in Iran. This paper reports the damage on RJC frame structures and describes their possible causes. It is revealed that most of the R/C framed structures suffered damages due to the lack of seismic resistance design practices and poor reinforcement detailing. Results of nonlinear earthquake response analysis of a typical damaged building showed that the degree...

  12. Measurement of damage in systemic vasculitis: a comparison of the Vasculitis Damage Index with the Combined Damage Assessment Index

    DEFF Research Database (Denmark)

    Suppiah, Ravi; Flossman, Oliver; Mukhtyar, Chetan

    2011-01-01

    To compare the Vasculitis Damage Index (VDI) with the Combined Damage Assessment Index (CDA) as measures of damage from vasculitis.......To compare the Vasculitis Damage Index (VDI) with the Combined Damage Assessment Index (CDA) as measures of damage from vasculitis....

  13. Plumbing the depths of Ligeia: considerations for depth sounding in Titan's hydrocarbon seas.

    Science.gov (United States)

    Arvelo, Juan; Lorenz, Ralph

    2013-12-01

    Saturn's moon Titan is the only satellite in this solar system with a dense atmosphere and hydrocarbon seas. The Titan Mare Explorer (TiME) mission would splashdown a capsule to float for 3 months on Ligeia Mare, a several-hundred-kilometer wide sea near Titan's north pole. Among TiME's scientific goals is the determination of the depth of Ligeia, to be achieved with an acoustic depth sounder. Since Titan's surface temperature is known to vary around 92 K, all instruments must be ruggedized to operate at cryogenic temperatures. This paper's contributions include an approach to infer key acoustic properties of this remote environment and the extraterrestrial environment's influence on the development of a cryogenic depth sounder. Additionally, an approach is formulated to infer the transducer's response, sensitivity, and performance when in situ calibration is impossible or when replicating key environmental conditions is too costly.

  14. Laser induced damage in optical materials: 7th ASTM symposium.

    Science.gov (United States)

    Glass, A J; Guenther, A H

    1976-06-01

    The Seventh ERDA-ASTM-ONR-NBS Symposium on Laser Induced Damage in Optical Materials was held at the National Bureau of Standards in Boulder, Colorado, on 29-31 July 1975. These Symposia are held as part of the activities in ASTM Subcommittee II on Lasers and Laser Materials, which is charged with the responsibilities of formulating standards and test procedures for laser materials, components, and devices. The Chairman of Subcommittee II is Haynes Lee, of Owens-Illinois, Inc. Co-chairmen for the Damage Symposia are Arthur Guenther of the Air Force Weapons Laboratory and Alexander J. Glass of Law-rence Livermore Laboratory. Over 150 attendees at the Symposium heard forty-five papers on topics relating fabrication procedures to laser induced damage in optical materials; on metal mirrors; in ir window materials; the multipulse, wavelength, and pulse length dependence of damage thresholds; damage in dielectric films and at exposed surfaces; as well as theoretical discussions on avalanche ionization and multiphoton processes of importance at shorter wavelengths. Of particular importance were the scaling relations developed from several parametric studies relating fundamental properties (refractive index, surface roughness etc.) to the damage threshold. This year many of the extrinsic influences tending to reduce a materials damage resistance were isolated such that measures of their egregious nature could be quantified. Much still needs to be accomplished to improve processing and fabrication procedures to allow a measurable approach to a materials intrinsic strength to be demonstrated.

  15. Death receptor ligands, in particular TRAIL, to overcome drug resistance

    NARCIS (Netherlands)

    de Jong, S; Timmer, T; Heijenbrok, FJ; de Vries, EGE

    2001-01-01

    The efficacy of chemotherapeutic drugs is hampered by the occurrence of intrinsic and acquired drug resistance. A variety of mechanisms cause drug-resistance. A final common factor, however, is the reduced capacity of drug resistant cells to go into apoptosis following treatment with DNA damaging

  16. Resistance of eastern hardwood stems to fire injury and damage

    Science.gov (United States)

    Kevin T. Smith; Elaine Kennedy Sutherland

    2006-01-01

    This paper reviews the protective features and defensive responses of eastern hardwood species exposed to fire. Trees survive fire through protective features such as thick bark and the induced defenses of compartmentalization. Dissection of trees exposed to prescribed fire in an oak forest in southern Ohio highlights the need to distinguish between bark scorch, stem...

  17. Nanotechnology-based system for damage-resistant concrete pavements.

    Science.gov (United States)

    2012-08-01

    The focus of this study was to explore the use of nanotechnology-based nanofilaments, such as carbon nanotubes (CNTs) and nanofibers (CNFs), as reinforcement for improving the mechanical properties of Portland cement paste and creating multifunctiona...

  18. Electron damage in organic crystals

    International Nuclear Information System (INIS)

    Howitt, D.G.; Thomas, G.

    1977-01-01

    The effects of radiation damage in three crystalline organic materials (l-valine, cytosine, copper phthalocyanine) have been investigated by electron microscopy. The degradation of these materials has been found to be consistent with a gradual collapse of their crystal structures brought about by ionization damage to the comprising molecules. It is inferred that the crystallinity of these materials is destroyed by ionizing radiation because the damaged molecules cannot be incorporated into the framework of their original structures. (author)

  19. Real-time lossless compression of depth streams

    KAUST Repository

    Schneider, Jens

    2017-08-17

    Various examples are provided for lossless compression of data streams. In one example, a Z-lossless (ZLS) compression method includes generating compacted depth information by condensing information of a depth image and a compressed binary representation of the depth image using histogram compaction and decorrelating the compacted depth information to produce bitplane slicing of residuals by spatial prediction. In another example, an apparatus includes imaging circuitry that can capture one or more depth images and processing circuitry that can generate compacted depth information by condensing information of a captured depth image and a compressed binary representation of the captured depth image using histogram compaction; decorrelate the compacted depth information to produce bitplane slicing of residuals by spatial prediction; and generate an output stream based upon the bitplane slicing.

  20. Slab tears and intermediate-depth seismicity

    Science.gov (United States)

    Meighan, Hallie E.; ten Brink, Uri S.; Pulliam, Jay

    2013-01-01

    Active tectonic regions where plate boundaries transition from subduction to strike slip can take several forms, such as triple junctions, acute, and obtuse corners. Well-documented slab tears that are associated with high rates of intermediate-depth seismicity are considered here: Gibraltar arc, the southern and northern ends of the Lesser Antilles arc, and the northern end of Tonga trench. Seismicity at each of these locations occurs, at times, in the form of swarms or clusters, and various authors have proposed that each marks an active locus of tear propagation. The swarms and clusters start at the top of the slab below the asthenospheric wedge and extend 30–60 km vertically downward within the slab. We propose that these swarms and clusters are generated by fluid-related embrittlement of mantle rocks. Focal mechanisms of these swarms generally fit the shear motion that is thought to be associated with the tearing process.

  1. ABDURRAHMAN WAHID, DEPTH ISLAM, AND RELIGIOUS PLURALISM

    Directory of Open Access Journals (Sweden)

    Media Zainul Bahri

    2016-04-01

    Full Text Available This essay elucidates the idea of religious pluralism of Abdurrahman Wahid (1940-2009, a very important figure in the tradition of Indonesian Islam. Wahis’s ideas  of religious pluralism is based on what the so-called “Depth Islam” (DI. DI is different from the usual theological dogmas that only contains concepts and structures. DI  is  not a literal and superficial forms of religion. It is an understanding  that goes beyond the literal texts to look for the principles and spirit of religion in appreciating humanity, diversity and peace.  DI may have arisen because of the long process of religious internalization within Wahid experiences, but it is also a hybrid form, i.e., it is a result of the process of encountering or learning Wahid’s traditions inter-mingling with cultures of the wider world. 

  2. Depth Perception in Cave and Panorama

    DEFF Research Database (Denmark)

    Mullins, Michael; Strojan, Tadeja Zupancic

    2004-01-01

    environments and then locate them and identify their shape on scaled drawings.  Results are presented together with statistical analysis. In a discussion of the results, the paper addresses the two hypothetical assertions ? that depth perception in physical reality and its virtual representations in CAVE......, learning and training in virtual environments; in architectural education; and participatory design processes, in which the dialogue between real and imagined space may take place in virtual . reality environments...... and learning than the Panorama. The results also suggest that knowledge gained in physical contexts is more readily transferred to its virtual simulation, while that gained in virtual experience is not reliably transferred to its equivalent physical context. The paper discusses implications for spatial ability...

  3. Density distributions and depth in flocks

    Science.gov (United States)

    Lewis, J. M.; Turner, M. S.

    2017-12-01

    Recent experimental evidence suggests that interactions in flocks of birds do not involve a characteristic length scale. Bird flocks have also been revealed to have an inhomogeneous density distribution, with the density of birds near the border greater than near the centre. We introduce a strictly metric-free model for collective behaviour that incorporates a distributed motional bias, providing control of the density distribution. A simple version of this model is then able to provide a good fit to published data for the density variation across flocks of Starlings. We find that it is necessary for individuals on the edge of the flock to have an inward motional bias but that birds in the interior of the flock instead must have an outward bias. We discuss the ability of individuals to determine their depth within a flock and show how this might be achieved by relatively simple analysis of their visual environment.

  4. A study on MFL based wire rope damage detection

    Science.gov (United States)

    Park, J.; Kim, J.-W.; Kim, J.; Park, S.

    2017-04-01

    Non-destructive testing on wire rope is in great demand to prevent safety accidents at sites where many heavy equipment using ropes are installed. In this paper, a research on quantification of magnetic flux leakage (MFL) signals were carried out to detect damages on wire rope. First, a simulation study was performed with a steel rod model using a finite element analysis (FEA) program. The leakage signals from the simulation study were obtained and it was compared for parameter: depth of defect. Then, an experiment on same conditions was conducted to verify the results of the simulation. Throughout the results, the MFL signal was quantified and a wire rope damage detection was then confirmed to be feasible. In further study, it is expected that the damage characterization of an entire specimen will be visualized as well.

  5. Antibiotic Resistance

    DEFF Research Database (Denmark)

    Munck, Christian

    of antimicrobial resistance: (1) adaptive mutations and (2) horizontal acquisition of resistance genes from antibiotic gene reservoirs. By studying the geno- and phenotypic changes of E. coli in response to single and drug-pair exposures, I uncover the evolutionary trajectories leading to adaptive resistance. I......Bacteria can avoid extinction during antimicrobial exposure by becoming resistant. They achieve this either via adaptive mutations or horizontally acquired resistance genes. If resistance emerges in clinical relevant species, it can lead to treatment failure and ultimately result in increasing...... morbidity and mortality as well as an increase in the cost of treatment. Understanding how bacteria respond to antibiotic exposure gives the foundations for a rational approach to counteract antimicrobial resistance. In the work presented in this thesis, I explore the two fundamental sources...

  6. Earthquake damage to underground facilities

    Energy Technology Data Exchange (ETDEWEB)

    Pratt, H.R.; Hustrulid, W.A. Stephenson, D.E.

    1978-11-01

    The potential seismic risk for an underground nuclear waste repository will be one of the considerations in evaluating its ultimate location. However, the risk to subsurface facilities cannot be judged by applying intensity ratings derived from the surface effects of an earthquake. A literature review and analysis were performed to document the damage and non-damage due to earthquakes to underground facilities. Damage from earthquakes to tunnels, s, and wells and damage (rock bursts) from mining operations were investigated. Damage from documented nuclear events was also included in the study where applicable. There are very few data on damage in the subsurface due to earthquakes. This fact itself attests to the lessened effect of earthquakes in the subsurface because mines exist in areas where strong earthquakes have done extensive surface damage. More damage is reported in shallow tunnels near the surface than in deep mines. In mines and tunnels, large displacements occur primarily along pre-existing faults and fractures or at the surface entrance to these facilities.Data indicate vertical structures such as wells and shafts are less susceptible to damage than surface facilities. More analysis is required before seismic criteria can be formulated for the siting of a nuclear waste repository.

  7. Earthquake damage to underground facilities

    International Nuclear Information System (INIS)

    Pratt, H.R.; Hustrulid, W.A.; Stephenson, D.E.

    1978-11-01

    The potential seismic risk for an underground nuclear waste repository will be one of the considerations in evaluating its ultimate location. However, the risk to subsurface facilities cannot be judged by applying intensity ratings derived from the surface effects of an earthquake. A literature review and analysis were performed to document the damage and non-damage due to earthquakes to underground facilities. Damage from earthquakes to tunnels, s, and wells and damage (rock bursts) from mining operations were investigated. Damage from documented nuclear events was also included in the study where applicable. There are very few data on damage in the subsurface due to earthquakes. This fact itself attests to the lessened effect of earthquakes in the subsurface because mines exist in areas where strong earthquakes have done extensive surface damage. More damage is reported in shallow tunnels near the surface than in deep mines. In mines and tunnels, large displacements occur primarily along pre-existing faults and fractures or at the surface entrance to these facilities.Data indicate vertical structures such as wells and shafts are less susceptible to damage than surface facilities. More analysis is required before seismic criteria can be formulated for the siting of a nuclear waste repository

  8. Depth Echolocation Learnt by Novice Sighted People.

    Directory of Open Access Journals (Sweden)

    Alessia Tonelli

    Full Text Available Some blind people have developed a unique technique, called echolocation, to orient themselves in unknown environments. More specifically, by self-generating a clicking noise with the tongue, echolocators gain knowledge about the external environment by perceiving more detailed object features. It is not clear to date whether sighted individuals can also develop such an extremely useful technique. To investigate this, here we test the ability of novice sighted participants to perform a depth echolocation task. Moreover, in order to evaluate whether the type of room (anechoic or reverberant and the type of clicking sound (with the tongue or with the hands influences the learning of this technique, we divided the entire sample into four groups. Half of the participants produced the clicking sound with their tongue, the other half with their hands. Half of the participants performed the task in an anechoic chamber, the other half in a reverberant room. Subjects stood in front of five bars, each of a different size, and at five different distances from the subject. The dimension of the bars ensured a constant subtended angle for the five distances considered. The task was to identify the correct distance of the bar. We found that, even by the second session, the participants were able to judge the correct depth of the bar at a rate greater than chance. Improvements in both precision and accuracy were observed in all experimental sessions. More interestingly, we found significantly better performance in the reverberant room than in the anechoic chamber. The type of clicking did not modulate our results. This suggests that the echolocation technique can also be learned by sighted individuals and that room reverberation can influence this learning process. More generally, this study shows that total loss of sight is not a prerequisite for echolocation skills this suggests important potential implications on rehabilitation settings for persons with

  9. Contributions of In-Situ Stress Transient Redistribution to Blasting Excavation Damage Zone of Deep Tunnels

    Science.gov (United States)

    Yan, Peng; Lu, Wen-bo; Chen, Ming; Hu, Ying-guo; Zhou, Chuang-bing; Wu, Xin-xia

    2015-03-01

    With the background of construction of the headrace tunnels with the deepest buried depth in China at present, by means of carefully acoustic velocity detection and analysis of Excavation Damage Zone (EDZ), the contributions to damage zones made by the effect of in situ stress transient redistribution are studied and compared with the extent of damage caused by the explosive load. Also, the numerical simulation was adopted to verify detecting the results. It turned out that the in situ stress transient redistribution during blasting has great influence on the development of EDZ of deep tunnels. The blasting excavation-induced damage zone of deep tunnels can be divided into the inner damage zone and the outer damage zone from the excavation surface into surrounding rocks. Although this damage zone dividing method is similar to the work of Martino and Chandler (2004), the consideration of developing a mechanism of the inner damage zone, especially the contribution of in situ stress transient redistribution, is totally different. The inner damage zone, which accounts for 29-57 % of the total damage zone, is mainly caused by explosive load and in situ stress transient adjustment, while the outer damage zone can be mostly attributed to the static redistribution of in situ stress. Field tests and numerical simulation indicate that the in situ stress transient redistribution effect during blasting contributes about 16-51 % to the inner damage zone in the 2# headrace tunnel of Jinping II Hydropower Station. For general cases, it can be concluded that the in situ stress transient redistribution is one of the main contributors of an excavation damage zone, and damage caused by in situ stress transient redistribution effect may exceed the damage caused by explosion load and become the main inducing factor for damage with the rise of in situ stress levels.

  10. Damage control productivity : an input damage abatement approach

    NARCIS (Netherlands)

    Oude Lansink, A.G.J.M.; Carpentier, A.

    2001-01-01

    This paper compares the value of the marginal product of three different pesticides from different specifications of the production function. The specifications are the output damage abatement specification proposed by Lichtenberg and Zilberman, a general input damage abatement specification and a

  11. Excavation damage and disturbance in crystalline rock - results from experiments and analyses

    International Nuclear Information System (INIS)

    Baeckblom, Goeran

    2008-11-01

    SKB plans to submit the application to site and construct the final repository for spent nuclear fuel in 2010. One important basis for the application is the results of the safety assessments, for which one particular dataset is the axial hydraulic properties along the underground openings used to calculate the transport resistance for radionuclide transport in the event that the canister is impaired. SKB initiated a project (Zuse) to be run over the period 2007-2009 to: - establish the current knowledge base on excavation damage and disturbance with particular focus on the axial hydraulic properties along the underground openings; - provide a basis for the requirements and compliance criteria for the excavation damaged and disturbed zone; - devise methods and instruments to infer or measure the excavation damage and disturbance at different times during the repository construction and operation before closure; - propose demonstration tests for which the methods are used in situ to qualify appropriate data for use in the safety reports. This report presents the results of the first stage of the Zuse project. Previous major experiments and studies in Canada, Finland, Japan, Sweden and Switzerland on spalling, excavation damage and disturbance was compiled and evaluated to provide the SR-Site report with a defendable database on the properties for the excavation damage and disturbance. In preparation for the SR-Site report, a number of sensitivity studies were conducted in which reasonable ranges of values for spalling and damage were selected in combination with an impaired backfill. The report here describes the construction of the repository in eleven steps and for each of these steps, the potential evolution of THMCB (Thermal, Mechanical, Hydraulic and Chemical/ Biological) processes are reviewed. In this work it was found that descriptions of the chemical and microbiological evolution connected with excavation damage and disturbance was lacking. The preliminary

  12. Radiation damage to histones

    International Nuclear Information System (INIS)

    Mee, L.K.; Adelstein, S.J.

    1985-01-01

    The damage to histones irradiated in isolation is being elaborated to aid the identification of the crosslinking sites in radiation-induced DNA-histone adducts. Histones are being examined by amino acid analysis to determine the destruction of residues and by polyacrylamide gel electrophoresis to delineate changes in conformation. For the slightly lysine-rich histone, H2A, a specific attack on selective residues has been established, the aromatic residues, tyrosine and phenylalanine, and the heterocyclic residue, histidine, being significantly destroyed. In addition, a significant increase in aspartic acid was found; this may represent a radiation product from scission of the ring in the histidine residues. The similarity of the effects on residues in nitrous oxide-saturated and nitrogen-saturated solutions suggests that OH . and e/sub aq//sup -/ are equally efficient and selective in their attack. On gel electrophoresis degradation of the histone H2A was found to be greatest for irradiations in nitrous oxide-saturated solutions, suggesting CH . is the most effective radical for producing changes in conformation; O/sub 2//sup -/ was essentially ineffective. Other histones are being examined for changes in amino acid composition, conformation, and for the formation of radiation products

  13. Decision trees with minimum average depth for sorting eight elements

    KAUST Repository

    AbouEisha, Hassan M.

    2015-11-19

    We prove that the minimum average depth of a decision tree for sorting 8 pairwise different elements is equal to 620160/8!. We show also that each decision tree for sorting 8 elements, which has minimum average depth (the number of such trees is approximately equal to 8.548×10^326365), has also minimum depth. Both problems were considered by Knuth (1998). To obtain these results, we use tools based on extensions of dynamic programming which allow us to make sequential optimization of decision trees relative to depth and average depth, and to count the number of decision trees with minimum average depth.

  14. Ribonucleotide triggered DNA damage and RNA-DNA damage responses.

    Science.gov (United States)

    Wallace, Bret D; Williams, R Scott

    2014-01-01

    Research indicates that the transient contamination of DNA with ribonucleotides exceeds all other known types of DNA damage combined. The consequences of ribose incorporation into DNA, and the identity of protein factors operating in this RNA-DNA realm to protect genomic integrity from RNA-triggered events are emerging. Left unrepaired, the presence of ribonucleotides in genomic DNA impacts cellular proliferation and is associated with chromosome instability, gross chromosomal rearrangements, mutagenesis, and production of previously unrecognized forms of ribonucleotide-triggered DNA damage. Here, we highlight recent findings on the nature and structure of DNA damage arising from ribonucleotides in DNA, and the identification of cellular factors acting in an RNA-DNA damage response (RDDR) to counter RNA-triggered DNA damage.

  15. Treatment of anisotropic damage development within a scalar damage formulation

    Science.gov (United States)

    Chan, K. S.; Bodner, S. R.; Munson, D. E.

    This paper is concerned with describing a damage mechanics formulation which provides for non-isotropic effects using a scalar damage variable. An investigation has been in progress for establishing the constitutive behavior of rock salt at long times and low to moderate confining pressures in relation to the possible use of excavated rooms in rock salt formations as repositories for nuclear waste. An important consideration is the effect of damage manifested principally by the formation of shear induced wing cracks which have a stress dependent orientation. The analytical formulation utilizes a scalar damage parameter, but is capable of indicating the non-isotropic dependence of inelastic straining on the stress state and the confining pressure. Also, the equations indicate the possibility of volumetric expansions leading to the onset of tertiary creep and eventually rupture if the damage variable reaches a critical value.

  16. Susceptibility to social pressure following ventromedial prefrontal cortex damage.

    Science.gov (United States)

    Chen, Kuan-Hua; Rusch, Michelle L; Dawson, Jeffrey D; Rizzo, Matthew; Anderson, Steven W

    2015-11-01

    Social pressure influences human behavior including risk taking, but the psychological and neural underpinnings of this process are not well understood. We used the human lesion method to probe the role of ventromedial prefrontal cortex (vmPFC) in resisting adverse social pressure in the presence of risk. Thirty-seven participants (11 with vmPFC damage, 12 with brain damage outside the vmPFC and 14 without brain damage) were tested in driving simulator scenarios requiring left-turn decisions across oncoming traffic with varying time gaps between the oncoming vehicles. Social pressure was applied by a virtual driver who honked aggressively from behind. Participants with vmPFC damage were more likely to select smaller and potentially unsafe gaps under social pressure, while gap selection by the comparison groups did not change under social pressure. Participants with vmPFC damage also showed prolonged elevated skin conductance responses (SCR) under social pressure. Comparison groups showed similar initial elevated SCR, which then declined prior to making left-turn decisions. The findings suggest that the vmPFC plays an important role in resisting explicit and immediately present social pressure with potentially negative consequences. The vmPFC appears to contribute to the regulation of emotional responses and the modulation of decision making to optimize long-term outcomes. © The Author (2015). Published by Oxford University Press. For Permissions, please email: journals.permissions@oup.com.

  17. Depth and Well Type Related to Groundwater Microbiological Contamination

    Directory of Open Access Journals (Sweden)

    Nayara Halimy Maran

    2016-10-01

    Full Text Available Use of groundwater from private wells in households has increased considerably, owing to a better cost/benefit ratio than that of water provided by local utilities for a fee. However, this water is usually untreated, which makes it a vehicle for diseases. Thus, monitoring this water is necessary to ensure its integrity and quality. We aimed to evaluate the physical, chemical, and microbiological parameters of untreated groundwater drawn from different types of wells, and the antimicrobial susceptibility profile of the bacteria isolated from this water. Wellwater samples were collected in two Brazilian cities. Although physical and chemical parameters of the water were suitable for drinking, Escherichia coli was detected in 33% of the samples. E. coli contaminated 65% of dug wells and 10.25% of drilled wells. Many bacteria isolated were resistant to multiple antibacterial agents, including β-lactams. Microbial contamination of this water was related to the well depth, and was more common in dug wells, making this water unfit for human consumption. Consumption of such contaminated and untreated water is a public health concern. Thus, individuals who regularly use such water must be alerted so they may either take preventive measures or connect to the water distribution system operated by local utilities.

  18. Application of petrographic examination techniques to the assessment of fire-damaged concrete and masonry structures

    International Nuclear Information System (INIS)

    Ingham, Jeremy P.

    2009-01-01

    The number of building fires has doubled over the last 50 years. There has never been a greater need for structures to be assessed for fire damage to ensure safety and enable appropriate repairs to be planned. Fortunately, even after a severe fire, concrete and masonry structures are generally capable of being repaired rather than demolished. By allowing direct examination of microcracking and mineralogical changes, petrographic examination has become widely used to determine the depth of fire damage for reinforced concrete elements. Petrographic examination can also be applied to fire-damaged masonry structures built of materials such as stone, brick and mortar. Petrography can ensure accurate detection of damaged geomaterials, which provides cost savings during building repair and increased safety reassurance. This paper comprises a review of the role of petrography in fire damage assessments, drawing on a range of actual fire damage investigations.

  19. Comparison in performance of sediment microbial fuel cells according to depth of embedded anode.

    Science.gov (United States)

    An, Junyeong; Kim, Bongkyu; Nam, Jonghyeon; Ng, How Yong; Chang, In Seop

    2013-01-01

    Five rigid graphite plates were embedded in evenly divided sections of sediment, ranging from 2 cm (A1) to 10 cm (A5) below the top sediment layer. The maximum power and current of the MFCs increased in depth order; however, despite the increase in the internal resistance, the power and current density of the A5 MFC were 2.2 and 3.5 times higher, respectively, than those of the A1 MFC. In addition, the anode open circuit potentials (OCPs) of the sediment microbial fuel cells (SMFCs) became more negative with sediment depth. Based on these results, it could be then concluded that as the anode-embedding depth increases, that the anode environment is thermodynamically and kinetically favorable to anodophiles or electrophiles. Therefore, the anode-embedding depth should be considered an important parameter that determines the performance of SMFCs, and we posit that the anode potential could be one indicator for selecting the anode-embedding depth. Copyright © 2012 Elsevier Ltd. All rights reserved.

  20. Collisions damage assessment of ships and jack-up rigs

    DEFF Research Database (Denmark)

    Zhang, Shengming; Pedersen, P. Terndrup; Ocakli, Hasan

    2015-01-01

    Ship collision with offshore installations is one of the key concerns in design and assess of platforms performance and safety. This paper presents an analysis on collision energy and structural damage in ship and offshore platform collisions for various collision scenarios. The platform or rig...... is treated as either rigid or flexible and its sensitivity on collision energy and structural damage is studied. An application example where an ice-strengthened supply vessel collides against a jack-up rig is analysed and the crushing resistance of the involved thin-walled structures is evaluated....

  1. Scaffolding knowledge integration through curricular depth

    Science.gov (United States)

    Clark, Douglas Burton

    The three interconnected levels of this research characterize how students develop deeper understanding in a complex science topic. The first investigation analyzes the impact of progressively more streamlined versions of the Computer as Learning Partner (CLP) curriculum. This cross-semester investigation analyzes subject matter posttest data for 3000 students who studied one of four versions of the CLP curriculum. The second investigation follows 50 students across their 8th grade CLP semester and into high school. This within-semester analysis maps the knowledge integration of two fairly successful and two less successful students in addition to focusing on the entire cohort. The third investigation analyzes student learning across a novel five-day laboratory/simulation project. Together, these cross-semester, within-semester, and project-level analyses clarify the paths through which students integrate their ideas in response to instruction that emphasizes knowledge integration. To facilitate these analyses, this research develops three new ways to represent connections among student ideas. Summary Tables present accessible overviews of case study students' progress in core topic areas across each interview. Distilled Interview Tables enumerate ideas held at each level of sophistication, displaying trends in sophistication and integration of ideas, clarifying contradictions, and identifying appearance of new ideas. Conceptual Element Maps chart connections and level of integration in further detail, highlighting the paths through which students reorganize and connect the elements within their conceptual ecologies and highlighting areas of strength and weakness. These new representations aid in the identification of appropriate targeted curricular interventions. In addition to the methodological contributions, this work makes theoretical contributions to the conceptual change literature and the depth of coverage literature. Contributions to the conceptual change

  2. Camptothecin resistance

    DEFF Research Database (Denmark)

    Brangi, M; Litman, Thomas; Ciotti, M

    1999-01-01

    The mitoxantrone resistance (MXR) gene encodes a recently characterized ATP-binding cassette half-transporter that confers multidrug resistance. We studied resistance to the camptothecins in two sublines expressing high levels of MXR: S1-M1-80 cells derived from parental S1 colon cancer cells...... and MCF-7 AdVp3,000 isolated from parental MCF-7 breast cancer cells. Both cell lines were 400- to 1,000-fold more resistant to topotecan, 9-amino-20(S)-camptothecin, and the active metabolite of irinotecan, 7-ethyl-10-hydroxycamptothecin (SN-38), than their parental cell lines. The cell lines...... demonstrated much less resistance to camptothecin and to several camptothecin analogues. Reduced accumulation and energy-dependent efflux of topotecan was demonstrated by confocal microscopy. A significant reduction in cleavable complexes in the resistant cells could be observed after SN-38 treatment...

  3. Damage growth in aerospace composites

    CERN Document Server

    2015-01-01

    This book presents novel methods for the simulation of damage evolution in aerospace composites that will assist in predicting damage onset and growth and thus foster less conservative designs which realize the promised economic benefits of composite materials. The presented integrated numerical/experimental methodologies are capable of taking into account the presence of damage and its evolution in composite structures from the early phases of the design (conceptual design) through to the detailed finite element method analysis and verification phase. The book is based on the GARTEUR Research Project AG-32, which ran from 2007 to 2012, and documents the main results of that project. In addition, the state of the art in European projects on damage evolution in composites is reviewed. While the high specific strength and stiffness of composite materials make them suitable for aerospace structures, their sensitivity to damage means that designing with composites is a challenging task. The new approaches describ...

  4. Rand Corporation Mean Monthly Global Snow Depth, Version 1

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set provides monthly snow depth for the entire globe (excluding Africa and South America) from 1950 to 1976. All available monthly snow depth climatologies...

  5. Canadian Meteorological Centre (CMC) Daily Snow Depth Analysis Data

    Data.gov (United States)

    National Aeronautics and Space Administration — This data set consists of Northern Hemisphere snow depth analysis data processed by the Canadian Meteorological Centre (CMC). Snow depth data obtained from surface...

  6. Depth-based Multi-View 3D Video Coding

    DEFF Research Database (Denmark)

    Zamarin, Marco

    -view video. Depth maps are typically used to synthesize the desired output views, and the performance of view synthesis algorithms strongly depends on the accuracy of depth information. In this thesis, novel algorithms for efficient depth map compression in MVD scenarios are proposed, with particular focus...... on edge-preserving solutions. In a proposed scheme, texture-depth correlation is exploited to predict surface shapes in the depth signal. In this way depth coding performance can be improved in terms of both compression gain and edge-preservation. Another solution proposes a new intra coding mode targeted...... to depth blocks featuring arbitrarily-shaped edges. Edge information is encoded exploiting previously coded edge blocks. Integrated in H.264/AVC, the proposed mode allows significant bit rate savings compared with a number of state-of-the-art depth codecs. View synthesis performances are also improved...

  7. Approximate relationship between frequency-dependent skin depth ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Earth System Science; Volume 125; Issue 7. Approximate relationship between frequency-dependent skin depth resolved from geoelectromagnetic pedotransfer function and depth of investigation resolved from geoelectrical measurements: A case study of coastal formation, southern Nigeria.

  8. DNA damage in neurodegenerative diseases

    International Nuclear Information System (INIS)

    Coppedè, Fabio; Migliore, Lucia

    2015-01-01

    Highlights: • Oxidative DNA damage is one of the earliest detectable events in the neurodegenerative process. • The mitochondrial DNA is more vulnerable to oxidative attack than the nuclear DNA. • Cytogenetic damage has been largely documented in Alzheimer's disease patients. • The question of whether DNA damage is cause or consequence of neurodegeneration is still open. • Increasing evidence links DNA damage and repair with epigenetic phenomena. - Abstract: Following the observation of increased oxidative DNA damage in nuclear and mitochondrial DNA extracted from post-mortem brain regions of patients affected by neurodegenerative diseases, the last years of the previous century and the first decade of the present one have been largely dedicated to the search of markers of DNA damage in neuronal samples and peripheral tissues of patients in early, intermediate or late stages of neurodegeneration. Those studies allowed to demonstrate that oxidative DNA damage is one of the earliest detectable events in neurodegeneration, but also revealed cytogenetic damage in neurodegenerative conditions, such as for example a tendency towards chromosome 21 malsegregation in Alzheimer's disease. As it happens for many neurodegenerative risk factors the question of whether DNA damage is cause or consequence of the neurodegenerative process is still open, and probably both is true. The research interest in markers of oxidative stress was shifted, in recent years, towards the search of epigenetic biomarkers of neurodegenerative disorders, following the accumulating evidence of a substantial contribution of epigenetic mechanisms to learning, memory processes, behavioural disorders and neurodegeneration. Increasing evidence is however linking DNA damage and repair with epigenetic phenomena, thereby opening the way to a very attractive and timely research topic in neurodegenerative diseases. We will address those issues in the context of Alzheimer's disease

  9. DNA damage in neurodegenerative diseases

    Energy Technology Data Exchange (ETDEWEB)

    Coppedè, Fabio, E-mail: fabio.coppede@med.unipi.it; Migliore, Lucia, E-mail: lucia.migliore@med.unipi.it

    2015-06-15

    Highlights: • Oxidative DNA damage is one of the earliest detectable events in the neurodegenerative process. • The mitochondrial DNA is more vulnerable to oxidative attack than the nuclear DNA. • Cytogenetic damage has been largely documented in Alzheimer's disease patients. • The question of whether DNA damage is cause or consequence of neurodegeneration is still open. • Increasing evidence links DNA damage and repair with epigenetic phenomena. - Abstract: Following the observation of increased oxidative DNA damage in nuclear and mitochondrial DNA extracted from post-mortem brain regions of patients affected by neurodegenerative diseases, the last years of the previous century and the first decade of the present one have been largely dedicated to the search of markers of DNA damage in neuronal samples and peripheral tissues of patients in early, intermediate or late stages of neurodegeneration. Those studies allowed to demonstrate that oxidative DNA damage is one of the earliest detectable events in neurodegeneration, but also revealed cytogenetic damage in neurodegenerative conditions, such as for example a tendency towards chromosome 21 malsegregation in Alzheimer's disease. As it happens for many neurodegenerative risk factors the question of whether DNA damage is cause or consequence of the neurodegenerative process is still open, and probably both is true. The research interest in markers of oxidative stress was shifted, in recent years, towards the search of epigenetic biomarkers of neurodegenerative disorders, following the accumulating evidence of a substantial contribution of epigenetic mechanisms to learning, memory processes, behavioural disorders and neurodegeneration. Increasing evidence is however linking DNA damage and repair with epigenetic phenomena, thereby opening the way to a very attractive and timely research topic in neurodegenerative diseases. We will address those issues in the context of Alzheimer's disease

  10. Excavation damage and disturbance in crystalline rock - results from experiments and analyses

    Energy Technology Data Exchange (ETDEWEB)

    Baeckblom, Goeran (Conrox AB, Stockholm (Sweden))

    2008-11-15

    SKB plans to submit the application to site and construct the final repository for spent nuclear fuel in 2010. One important basis for the application is the results of the safety assessments, for which one particular dataset is the axial hydraulic properties along the underground openings used to calculate the transport resistance for radionuclide transport in the event that the canister is impaired. SKB initiated a project (Zuse) to be run over the period 2007-2009 to: - establish the current knowledge base on excavation damage and disturbance with particular focus on the axial hydraulic properties along the underground openings; - provide a basis for the requirements and compliance criteria for the excavation damaged and disturbed zone; - devise methods and instruments to infer or measure the excavation damage and disturbance at different times during the repository construction and operation before closure; - propose demonstration tests for which the methods are used in situ to qualify appropriate data for use in the safety reports. This report presents the results of the first stage of the Zuse project. Previous major experiments and studies in Canada, Finland, Japan, Sweden and Switzerland on spalling, excavation damage and disturbance was compiled and evaluated to provide the SR-Site report with a defendable database on the properties for the excavation damage and disturbance. In preparation for the SR-Site report, a number of sensitivity studies were conducted in which reasonable ranges of values for spalling and damage were selected in combination with an impaired backfill. The report here describes the construction of the repository in eleven steps and for each of these steps, the potential evolution of THMCB (Thermal, Mechanical, Hydraulic and Chemical/ Biological) processes are reviewed. In this work it was found that descriptions of the chemical and microbiological evolution connected with excavation damage and disturbance was lacking. The preliminary

  11. Cryptococcus neoformans-induced macrophage lysosome damage crucially contributes to fungal virulence.

    Science.gov (United States)

    Davis, Michael J; Eastman, Alison J; Qiu, Yafeng; Gregorka, Brian; Kozel, Thomas R; Osterholzer, John J; Curtis, Jeffrey L; Swanson, Joel A; Olszewski, Michal A

    2015-03-01

    Upon ingestion by macrophages, Cryptococcus neoformans can survive and replicate intracellularly unless the macrophages become classically activated. The mechanism enabling intracellular replication is not fully understood; neither are the mechanisms that allow classical activation to counteract replication. C. neoformans-induced lysosome damage was observed in infected murine bone marrow-derived macrophages, increased with time, and required yeast viability. To demonstrate lysosome damage in the infected host, we developed a novel flow cytometric method for measuring lysosome damage. Increased lysosome damage was found in C. neoformans-containing lung cells compared with C. neoformans-free cells. Among C. neoformans-containing myeloid cells, recently recruited cells displayed lower damage than resident cells, consistent with the protective role of recruited macrophages. The magnitude of lysosome damage correlated with increased C. neoformans replication. Experimental induction of lysosome damage increased C. neoformans replication. Activation of macrophages with IFN-γ abolished macrophage lysosome damage and enabled increased killing of C. neoformans. We conclude that induction of lysosome damage is an important C. neoformans survival strategy and that classical activation of host macrophages counters replication by preventing damage. Thus, therapeutic strategies that decrease lysosomal damage, or increase resistance to such damage, could be valuable in treating cryptococcal infections. Copyright © 2015 by The American Association of Immunologists, Inc.

  12. Use of grafting to prevent Hypsipyla grandella (Zeller) (Lepidoptera: Pyralidae) damage to new world Meliaceae species.

    Science.gov (United States)

    Perez, Julian; Eigenbrode, Sanford D; Hilje, Luko; Tripepi, Robert R; Aguilar, Maria E; Mesen, Francisco

    2010-01-01

    The susceptible species Cedrela odorata and Swietenia macrophylla to attack by Hypsipyla grandella (Zeller) larvae were grafted onto the resistant species Khaya senegalensis and Toona ciliata. Six-month-old grafted plants were then compared to their reciprocal grafts and to both intact (non-grafted) and autografted plants for damage due to H. grandella larvae and for their effects on larval performance. Two experiments were conducted: one in which the apical bud of the main plant shoot was inoculated with H. grandella eggs, and the other in which the bud was inoculated with third instars. Damage in each experiment was assessed by the number of frass piles, number and length of tunnels, number of damaged leaves, and damage to the apical bud. Larval performance was evaluated in terms of time to reach pupation and pupal weight and length. In both experiments, plant damage differed significantly among treatments (P < 0.03). Resistant rootstocks conferred resistance to susceptible scions. In both experiments, grafting by itself, regardless of the rootstock and scion combination, also reduced damage caused by H. grandella larvae. Scions of autografted susceptible species had similar resistance to susceptible scions grafted on resistant rootstocks. Few larvae reached pupation, and their pupal weight and length were similar.

  13. Evaluating methods for controlling depth perception in stereoscopic cinematography

    Science.gov (United States)

    Sun, Geng; Holliman, Nick

    2009-02-01

    Existing stereoscopic imaging algorithms can create static stereoscopic images with perceived depth control function to ensure a compelling 3D viewing experience without visual discomfort. However, current algorithms do not normally support standard Cinematic Storytelling techniques. These techniques, such as object movement, camera motion, and zooming, can result in dynamic scene depth change within and between a series of frames (shots) in stereoscopic cinematography. In this study, we empirically evaluate the following three types of stereoscopic imaging approaches that aim to address this problem. (1) Real-Eye Configuration: set camera separation equal to the nominal human eye interpupillary distance. The perceived depth on the display is identical to the scene depth without any distortion. (2) Mapping Algorithm: map the scene depth to a predefined range on the display to avoid excessive perceived depth. A new method that dynamically adjusts the depth mapping from scene space to display space is presented in addition to an existing fixed depth mapping method. (3) Depth of Field Simulation: apply Depth of Field (DOF) blur effect to stereoscopic images. Only objects that are inside the DOF are viewed in full sharpness. Objects that are far away from the focus plane are blurred. We performed a human-based trial using the ITU-R BT.500-11 Recommendation to compare the depth quality of stereoscopic video sequences generated by the above-mentioned imaging methods. Our results indicate that viewers' practical 3D viewing volumes are different for individual stereoscopic displays and viewers can cope with much larger perceived depth range in viewing stereoscopic cinematography in comparison to static stereoscopic images. Our new dynamic depth mapping method does have an advantage over the fixed depth mapping method in controlling stereo depth perception. The DOF blur effect does not provide the expected improvement for perceived depth quality control in 3D cinematography

  14. Hyperspectral aerosol optical depths from TCAP flights

    Energy Technology Data Exchange (ETDEWEB)

    Shinozuka, Yohei [NASA Ames Research Center (ARC), Moffett Field, Mountain View, CA (United States); Bay Area Environmental REsearch Institute; Johnson, Roy R [NASA Ames Research Center (ARC), Moffett Field, Mountain View, CA (United States); Flynn, Connor J [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Russell, Philip B [NASA Ames Research Center (ARC), Moffett Field, Mountain View, CA (United States); Schmid, Beat [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-06-01

    4STAR (Spectrometer for Sky-Scanning, Sun-Tracking Atmospheric Research), a hyperspectral airborne sunphotometer, acquired aerosol optical depths (AOD) at 1 Hz during all July 2012 flights of the Two Column Aerosol Project (TCAP). Root-mean-square differences from AERONET ground-based observations were 0.01 at wavelengths between 500-1020 nm, 0.02 at 380 and 1640 nm and 0.03 at 440 nm in four clear-sky fly-over events, and similar in ground side-by-side comparisons. Changes in the above-aircraft AOD across 3- km-deep spirals were typically consistent with integrals of coincident in situ (on DOE Gulfstream 1 with 4STAR) and lidar (on NASA B200) extinction measurements within 0.01, 0.03, 0.01, 0.02, 0.02, 0.02 at 355, 450, 532, 550, 700, 1064 nm, respectively, despite atmospheric variations and combined measurement uncertainties. Finer vertical differentials of the 4STAR measurements matched the in situ ambient extinction profile within 14% for one homogeneous column. For the AOD observed between 350-1660 nm, excluding strong

  15. The variable-depth mobile gammadensitometer (GMPV)

    International Nuclear Information System (INIS)

    Gourdon, J.L.; Davy, M.; Bisson, D.

    1991-01-01

    The continuous control of the density of wearing courses has been common practice in France for nearly twenty years. The instrument used for this purpose, called PSM (Petit Sabot Mobile; the Small Mobile Shoe), consists of a diffusion nucleo-densitometer carried on a mini-tractor. The unit has had to be completely replaced since this equipment is no longer on the market. The new instrument, known as the GMPV, has the following advantages. The depth of measurement is adjustable, so that thin wearing courses can be controlled. The accuracy and reproducibility of measurements are in the neighbourhood of 1% and 0.5% respectively, for a duration of 100 seconds. Handling is easier, thanks to infra-red remote steering of the measuring carriage from the driver's seat, and to a compatible micro-PC making it possible to gather, display, edit and store 200 kilometres of density values per hour. The GMPV is designed for intensive use in strict accordance with safety standards. It is due to be put into normal service in 1991 [fr

  16. Hyperspectral Aerosol Optical Depths from TCAP Flights

    Energy Technology Data Exchange (ETDEWEB)

    Shinozuka, Yohei; Johnson, Roy R.; Flynn, Connor J.; Russell, P. B.; Schmid, Beat; Redemann, Jens; Dunagan, Stephen; Kluzek, Celine D.; Hubbe, John M.; Segal-Rosenheimer, Michal; Livingston, J. M.; Eck, T.; Wagener, Richard; Gregory, L.; Chand, Duli; Berg, Larry K.; Rogers, Ray; Ferrare, R. A.; Hair, John; Hostetler, Chris A.; Burton, S. P.

    2013-11-13

    4STAR (Spectrometer for Sky-Scanning, Sun-Tracking Atmospheric Research), the world’s first hyperspectral airborne tracking sunphotometer, acquired aerosol optical depths (AOD) at 1 Hz during all July 2012 flights of the Two Column Aerosol Project (TCAP). Root-mean square differences from AERONET ground-based observations were 0.01 at wavelengths between 500-1020 nm, 0.02 at 380 and 1640 nm and 0.03 at 440 nm in four clear-sky fly-over events, and similar in ground side-by-side comparisons. Changes in the above-aircraft AOD across 3-km-deep spirals were typically consistent with integrals of coincident in situ (on DOE Gulfstream 1 with 4STAR) and lidar (on NASA B200) extinction measurements within 0.01, 0.03, 0.01, 0.02, 0.02, 0.02 at 355, 450, 532, 550, 700, 1064 nm, respectively, despite atmospheric variations and combined measurement uncertainties. Finer vertical differentials of the 4STAR measurements matched the in situ ambient extinction profile within 14% for one homogeneous column. For the AOD observed between 350-1660 nm, excluding strong water vapor and oxygen absorption bands, estimated uncertainties were ~0.01 and dominated by (then) unpredictable throughput changes, up to +/-0.8%, of the fiber optic rotary joint. The favorable intercomparisons herald 4STAR’s spatially-resolved high-frequency hyperspectral products as a reliable tool for climate studies and satellite validation.

  17. Investigating the Fundamentals of Molecular Depth Profiling Using Strong-field Photoionization of Sputtered Neutrals.

    Science.gov (United States)

    Willingham, D; Brenes, D A; Winograd, N; Wucher, A

    2011-01-01

    Molecular depth profiles of model organic thin films were performed using a 40 keV C 60 + cluster ion source in concert with TOF-SIMS. Strong-field photoionization of intact neutral molecules sputtered by 40 keV C 60 + primary ions was used to analyze changes in the chemical environment of the guanine thin films as a function of ion fluence. Direct comparison of the secondary ion and neutral components of the molecular depth profiles yields valuable information about chemical damage accumulation as well as changes in the molecular ionization probability. An analytical protocol based on the erosion dynamics model is developed and evaluated using guanine and trehalose molecular secondary ion signals with and without comparable laser photoionization data.

  18. Mineralogical Variation of Chelyabinsk with Depth from the Surface of the Parent Meteoroid

    Science.gov (United States)

    Yoshida, S.; Mikouchi, T.; Nagao, K.; Haba, M. K.; Hasegawa, H.; Komatsu, M.; Zolensky, M. E.

    2014-01-01

    The Chelyabinsk meteorite, which passed over the Chelyabinsk Oblast, Russia on Feb. 15th, 2013, brought serious damage by the shock wave and airburst. The diameter of the parent meteoroid is estimated to be approximately 20 m in diameter [1]. It was reported that the impact by this meteorite shower was 4,000 times as large as the TNT explosive and this was the largest airburst on Earth since the asteroid impact in Tunguska, Russia in 1908. The mineralogy and geochemical study of the recovered samples shows that Chelyabinsk is an LL5 chondrite [1]. In this study we analyzed several fragments of Chelyabinsk whose noble gas compositions have been measured and depths from the surface of the parent meteoroid were estimated [2]. We examined how mineralogical characteristics change with depth from the surface. This kind of study has never been performed and thus may be able to offer significant information about the evolution of meteorite parent bodies.

  19. Prediction model for carbonation depth of concrete subjected to freezing-thawing cycles

    Science.gov (United States)

    Xiao, Qian Hui; Li, Qiang; Guan, Xiao; Xian Zou, Ying

    2018-03-01

    Through the indoor simulation test of the concrete durability under the coupling effect of freezing-thawing and carbonation, the variation regularity of concrete neutralization depth under freezing-thawing and carbonation was obtained. Based on concrete carbonation mechanism, the relationship between the air diffusion coefficient and porosity in concrete was analyzed and the calculation method of porosity in Portland cement concrete and fly ash cement concrete was investigated, considering the influence of the freezing-thawing damage on the concrete diffusion coefficient. Finally, a prediction model of carbonation depth of concrete under freezing-thawing circumstance was established. The results obtained using this prediction model agreed well with the experimental test results, and provided a theoretical reference and basis for the concrete durability analysis under multi-factor environments.

  20. Probability distribution of pitting corrosion depth and rate in underground pipelines: A Monte Carlo study

    Energy Technology Data Exchange (ETDEWEB)

    Caleyo, F. [Departamento de Ingenieria Metalurgica, ESIQIE, IPN, UPALM Edif. 7, Zacatenco, 07738 Mexico, D.F. (Mexico)], E-mail: fcaleyo@gmail.com; Velazquez, J.C. [Departamento de Ingenieria Metalurgica, ESIQIE, IPN, UPALM Edif. 7, Zacatenco, 07738 Mexico, D.F. (Mexico); Valor, A. [Facultad de Fisica, Universidad de La Habana, San Lazaro y L, Vedado, 10400, La Habana (Cuba); Hallen, J.M. [Departamento de Ingenieria Metalurgica, ESIQIE, IPN, UPALM Edif. 7, Zacatenco, 07738 Mexico, D.F. (Mexico)

    2009-09-15

    The probability distributions of external-corrosion pit depth and pit growth rate were investigated in underground pipelines using Monte Carlo simulations. The study combines a predictive pit growth model developed by the authors with the observed distributions of the model variables in a range of soils. Depending on the pipeline age, any of the three maximal extreme value distributions, i.e. Weibull, Frechet or Gumbel, can arise as the best fit to the pitting depth and rate data. The Frechet distribution best fits the corrosion data for long exposure periods. This can be explained by considering the long-term stabilization of the diffusion-controlled pit growth. The findings of the study provide reliability analysts with accurate information regarding the stochastic characteristics of the pitting damage in underground pipelines.

  1. Advanced carrier depth profiling on Si and Ge with micro four-point probe

    DEFF Research Database (Denmark)

    Clarysse, Trudo; Eyben, Pierre; Parmentier, Brigitte

    2008-01-01

    In order to reach the ITRS goals for future complementary metal-oxide semiconductor technologies, there is a growing need for the accurate extraction of ultrashallow electrically active dopant (carrier) profiles. In this work, it will be illustrated that this need can be met by the micro four-point...... probe (M4PP) tool. M4PP sheet resistance measurements taken along beveled Si and Ge blanket shallow structures will be investigated. From the differential sheet resistance changes, the underlying carrier profile can be reconstructed without the need to rely on a complicated contact modeling, i.e., M4PP...... carrier profiling is an absolute carrier depth profiling technique. On Si, it is found that the more sensitive a structure is to carrier spilling along the bevel, the better the M4PP system performs relative to conventional spreading resistance probe (SRP) due to its much lower probe pressure...

  2. Clinical Management of HIV Drug Resistance

    Science.gov (United States)

    Cortez, Karoll J.; Maldarelli, Frank

    2011-01-01

    Combination antiretroviral therapy for HIV-1 infection has resulted in profound reductions in viremia and is associated with marked improvements in morbidity and mortality. Therapy is not curative, however, and prolonged therapy is complicated by drug toxicity and the emergence of drug resistance. Management of clinical drug resistance requires in depth evaluation, and includes extensive history, physical examination and laboratory studies. Appropriate use of resistance testing provides valuable information useful in constructing regimens for treatment-experienced individuals with viremia during therapy. This review outlines the emergence of drug resistance in vivo, and describes clinical evaluation and therapeutic options of the individual with rebound viremia during therapy. PMID:21994737

  3. Forecasted Flood Depth Grids Providing Early Situational Awareness to FEMA during the 2017 Atlantic Hurricane Season

    Science.gov (United States)

    Jones, M.; Longenecker, H. E., III

    2017-12-01

    The 2017 hurricane season brought the unprecedented landfall of three Category 4 hurricanes (Harvey, Irma and Maria). FEMA is responsible for coordinating the federal response and recovery efforts for large disasters such as these. FEMA depends on timely and accurate depth grids to estimate hazard exposure, model damage assessments, plan flight paths for imagery acquisition, and prioritize response efforts. In order to produce riverine or coastal depth grids based on observed flooding, the methodology requires peak crest water levels at stream gauges, tide gauges, high water marks, and best-available elevation data. Because peak crest data isn't available until the apex of a flooding event and high water marks may take up to several weeks for field teams to collect for a large-scale flooding event, final observed depth grids are not available to FEMA until several days after a flood has begun to subside. Within the last decade NOAA's National Weather Service (NWS) has implemented the Advanced Hydrologic Prediction Service (AHPS), a web-based suite of accurate forecast products that provide hydrograph forecasts at over 3,500 stream gauge locations across the United States. These forecasts have been newly implemented into an automated depth grid script tool, using predicted instead of observed water levels, allowing FEMA access to flood hazard information up to 3 days prior to a flooding event. Water depths are calculated from the AHPS predicted flood stages and are interpolated at 100m spacing along NHD hydrolines within the basin of interest. A water surface elevation raster is generated from these water depths using an Inverse Distance Weighted interpolation. Then, elevation (USGS NED 30m) is subtracted from the water surface elevation raster so that the remaining values represent the depth of predicted flooding above the ground surface. This automated process requires minimal user input and produced forecasted depth grids that were comparable to post

  4. 46 CFR 28.400 - Radar and depth sounding devices.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Radar and depth sounding devices. 28.400 Section 28.400... Operate With More Than 16 Individuals on Board § 28.400 Radar and depth sounding devices. (a) Each vessel... the operating station. (b) Each vessel must be fitted with a suitable echo depth sounding device. ...

  5. A depth-dependent formula for shallow water propagation

    NARCIS (Netherlands)

    Sertlek, H.O.; Ainslie, M.A.

    2014-01-01

    In shallow water propagation, the sound field depends on the proximity of the receiver to the sea surface, the seabed, the source depth, and the complementary source depth. While normal mode theory can predict this depth dependence, it can be computationally intensive. In this work, an analytical

  6. Modeling Root Depth Development with time under some Crop and ...

    African Journals Online (AJOL)

    Five empirical models for the prediction of root depth developed with time under four combinations of crop and tillage management systems have been developed by the method of polynomial regression. Root depth predictions by a general model were severally correlated with root depth predictions by the ...

  7. 21 CFR 888.4300 - Depth gauge for clinical use.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Depth gauge for clinical use. 888.4300 Section 888...) MEDICAL DEVICES ORTHOPEDIC DEVICES Surgical Devices § 888.4300 Depth gauge for clinical use. (a) Identification. A depth gauge for clinical use is a measuring device intended for various medical purposes, such...

  8. Depth-Dependent Halos : Illustrative Rendering of Dense Line Data

    NARCIS (Netherlands)

    Everts, Maarten H.; Bekker, Henk; Roerdink, Jos B.T.M.; Isenberg, Tobias

    2009-01-01

    We present a technique for the illustrative rendering of 3D line data at interactive frame rates. We create depth-dependent halos around lines to emphasize tight line bundles while less structured lines are de-emphasized. Moreover, the depth-dependent halos combined with depth cueing via line width

  9. Borehole depth and regolith aquifer hydraulic characteristics of ...

    African Journals Online (AJOL)

    In this study, the performance of regolith aquifers derived from the different bedrock types was examined using information on depth of borehole, depth to the static water level, yield of borehole and drawdown in 259 boreholes covering the different bedrock types. Results show that mean depth of wells varies from about 37 ...

  10. Computations Of Critical Depth In Rivers With Flood Plains | Okoli ...

    African Journals Online (AJOL)

    Critical flows may occur at more than one depth in rivers with flood plains. The possibility of multiple critical depths affects the water-surface profile calculations. Presently available algorithms determine only one of the critical depths which may lead to large errors. It is the purpose of this paper to present an analytical ...

  11. Depth anomalies in the Arabian Basin, NW Indian Ocean

    Digital Repository Service at National Institute of Oceanography (India)

    Ajay, K.K.; Chaubey, A.K.

    as the difference between the observed depth to oceanic basement (corrected for sediment load) and the calculated depth to oceanic basement of the same age. The results indicate an anomalous depth to basement of oceanic crust in the Arabian Basin in the age bracket...

  12. Effects of Sowing Media and Sowing Depth on Germination and ...

    African Journals Online (AJOL)

    This study examines the effect of sowing media and sowing depth on the germination and growth of Lecanodiscus cupanoides (Planch.Ex Benth). The germination of L. cupanoides seed was significantly affected by sowing depth and sowing medium at p=0.05. The result of various sowing media and sowing depth showed ...

  13. Model for Sulfate Diffusion Depth in Concrete under Complex Aggressive Environments and Its Experimental Verification

    Directory of Open Access Journals (Sweden)

    Yingwu Zhou

    2015-01-01

    Full Text Available Sulfate attack is one of the most important factors that lead to the performance deterioration of concrete materials. The progress of the sulfate diffusion depth in concrete is an important index that quantitatively characterizes the rate of concrete damage, cracking, and spalling due to sulfate attacks. The progress of the diffusion depth of concrete to sulfate attack is systematically investigated in this paper by both theoretical and experimental study. A newly time-varying model of the diffusion depth is developed, which has comprehensively considered a mass of parameter of complex environments for the first time. On this basis, a method is further proposed for effectively predicting the residual life of in-service concrete structures subject to sulfate attack. Integrating the data from the self-designed high-temperature dry-wet accelerated corrosion test and a large amount of experimental data reported in the existing literatures, the effectiveness and accuracy of the time-varying model of the diffusion depth by sulfates are finally verified.

  14. Effect of the depth base along the vertical on the electrical parameters of a vertical parallel silicon solar cell in open and short circuit

    Directory of Open Access Journals (Sweden)

    Gokhan Sahin

    2018-03-01

    Full Text Available This article presented a modeling study of effect of the depth base initiating on vertical parallel silicon solar cell’s photovoltaic conversion efficiency. After the resolution of the continuity equation of excess minority carriers, we calculated the electrical parameters such as the photocurrent density, the photovoltage, series resistance and shunt resistances, diffusion capacitance, electric power, fill factor and the photovoltaic conversion efficiency. We determined the maximum electric power, the operating point of the solar cell and photovoltaic conversion efficiency according to the depth z in the base. We showed that the photocurrent density decreases with the depth z. The photovoltage decreased when the depth base increases. Series and shunt resistances were deduced from electrical model and were influenced and the applied the depth base. The capacity decreased with the depth z of the base. We had studied the influence of the variation of the depth z on the electrical parameters in the base. Keywords: Depth base, Conversion efficiency, Electrical parameters, Open circuit, Short circuit

  15. Stability Study on Steel Structural Columns with Initial Blast Damage under High Temperatures

    Science.gov (United States)

    Baoxin, Qi; Yan, Shi; Li, Peng

    2018-03-01

    Blast may bring light-weight steel columns with initial damages, resulting in lowering its critical fire-resistance temperature whose reduced amplitude is relevant to the form and degree of the damages. Finite element analysis software ANSYS was used in the paper to analyze the issue of the fire-resistance temperature of the column with the blast damages, and the coupling method for heat and structure was applied during the simulation. The emphasis was laid on parametric factors of axial compression ratio, the form and the degree of the initial damages, as well as the confined condition at the ends of the columns. The numerical results showed that the fire-resistance temperature will lower as increasing of the axial compression ratio, the form and the degree of the initial damages and it will be also affected by the restraint conditions at the ends of the columns. The critical stress formula with initial bending damage under elevated temperature was set up under flexural small deformation condition, then the stability coefficient was determined and the method for evaluating the limit temperature of the column was put forward. The theoretical result was also compared with that of the finite element method (FEM). The results both showed that the stability capacity for the damaged columns was dramatically reduced as increasing the temperature and the initial damage level.

  16. Drug Resistance in Cancer: An Overview

    Science.gov (United States)

    Housman, Genevieve; Byler, Shannon; Heerboth, Sarah; Lapinska, Karolina; Longacre, Mckenna; Snyder, Nicole; Sarkar, Sibaji

    2014-01-01

    Cancers have the ability to develop resistance to traditional therapies, and the increasing prevalence of these drug resistant cancers necessitates further research and treatment development. This paper outlines the current knowledge of mechanisms that promote or enable drug resistance, such as drug inactivation, drug target alteration, drug efflux, DNA damage repair, cell death inhibition, and the epithelial-mesenchymal transition, as well as how inherent tumor cell heterogeneity plays a role in drug resistance. It also describes the epigenetic modifications that can induce drug resistance and considers how such epigenetic factors may contribute to the development of cancer progenitor cells, which are not killed by conventional cancer therapies. Lastly, this review concludes with a discussion on the best treatment options for existing drug resistant cancers, ways to prevent the formation of drug resistant cancers and cancer progenitor cells, and future directions of study. PMID:25198391

  17. Spatially continuous interpolation of water stage and water depths using the Everglades depth estimation network (EDEN)

    Science.gov (United States)

    Pearlstine, Leonard; Higer, Aaron; Palaseanu, Monica; Fujisaki, Ikuko; Mazzotti, Frank

    2007-01-01

    The Everglades Depth Estimation Network (EDEN) is an integrated network of real-time water-level monitoring, ground-elevation modeling, and water-surface modeling that provides scientists and managers with current (2000-present), online water-stage and water-depth information for the entire freshwater portion of the Greater Everglades. Continuous daily spatial interpolations of the EDEN network stage data are presented on a 400-square-meter grid spacing. EDEN offers a consistent and documented dataset that can be used by scientists and managers to (1) guide large-scale field operations, (2) integrate hydrologic and ecological responses, and (3) support biological and ecological assessments that measure ecosystem responses to the implementation of the Comprehensive Everglades Restoration Plan (CERP) The target users are biologists and ecologists examining trophic level responses to hydrodynamic changes in the Everglades.

  18. Statistical modelling of compression and fatigue damage of unidirectional fiber reinforced composites

    DEFF Research Database (Denmark)

    Mishnaevsky, Leon; Brøndsted, Povl

    2009-01-01

    A statistical computational model of strength and damage of unidirectional carbon fiber reinforced composites under compressive and cyclic compressive loading is presented in this paper. The model is developed on the basis of the Budiansky–Fleck fiber kinking condition, continuum damage mechanics...... concept and the Monte-Carlo method. The effects of fiber misalignment variability, fiber clustering, load sharing rules on the damage in composite are studied numerically. It is demonstrated that the clustering of fibers has a negative effect of the damage resistance of a composite. Further, the static...

  19. Comparative flood damage model assessment: towards a European approach

    Science.gov (United States)

    Jongman, B.; Kreibich, H.; Apel, H.; Barredo, J. I.; Bates, P. D.; Feyen, L.; Gericke, A.; Neal, J.; Aerts, J. C. J. H.; Ward, P. J.

    2012-12-01

    There is a wide variety of flood damage models in use internationally, differing substantially in their approaches and economic estimates. Since these models are being used more and more as a basis for investment and planning decisions on an increasingly large scale, there is a need to reduce the uncertainties involved and develop a harmonised European approach, in particular with respect to the EU Flood Risks Directive. In this paper we present a qualitative and quantitative assessment of seven flood damage models, using two case studies of past flood events in Germany and the United Kingdom. The qualitative analysis shows that modelling approaches vary strongly, and that current methodologies for estimating infrastructural damage are not as well developed as methodologies for the estimation of damage to buildings. The quantitative results show that the model outcomes are very sensitive to uncertainty in both vulnerability (i.e. depth-damage functions) and exposure (i.e. asset values), whereby the first has a larger effect than the latter. We conclude that care needs to be taken when using aggregated land use data for flood risk assessment, and that it is essential to adjust asset values to the regional economic situation and property characteristics. We call for the development of a flexible but consistent European framework that applies best practice from existing models while providing room for including necessary regional adjustments.

  20. Temperate Ice Depth-Sounding Radar

    Science.gov (United States)

    Jara-Olivares, V. A.; Player, K.; Rodriguez-Morales, F.; Gogineni, P.

    2008-12-01

    Glaciers in several parts of the world are reported to be retreating and thinning rapidly over the last decade. Radar instruments can be used to provide a wealth of information regarding the internal and basal conditions of large and small ice masses. These instruments typically operate in the VHF and UHF regions of the electromagnetic spectrum. For temperate-ice sounding, however, the high water content produces scattering and attenuation in propagating radar waves at VHF and UHF frequencies, which significantly reduce the penetration depths. Radars operating in the HF band are better suited for systematic surveys of the thickness and sub-glacial topography of temperate-ice regions. We are developing a dual-frequency Temperate-Ice-Depth Sounding Radar (TIDSoR) that can penetrate through water pockets, thus providing more accurate measurements of temperate ice properties such as thickness and basal conditions. The radar is a light-weight, low power consumption portable system for surface-based observations in mountainous terrain or aerial surveys. TIDSoR operates at two different center frequencies: 7.7 MHz and 14 MHz, with a maximum output peak power of 20 W. The transmit waveform is a digitally generated linear frequency-modulated chirp with 1 MHz bandwidth. The radar can be installed on aircrafts such as the CReSIS UAV [1], DCH-6 (Twin Otter), or P-3 Orion for aerial surveys, where it could be supported by the airplane power system. For surface based experiments, TIDSoR can operate in a backpack configuration powered by a compact battery system. The system can also be installed on a sled towed by a motorized vehicle, in which case the power supply can be replaced by a diesel generator. The radar consists of three functional blocks: the digital section, the radio-frequency (RF) section, and the antenna, and is designed to weigh less than 2 kg, excluding the power supply. The digital section generates the transmit waveforms as well as timing and control signals