WorldWideScience

Sample records for resistance au cisaillement

  1. Mise au point du rheometre a cisaillement annulaire pour l'etude de rheologie d'un mastic bitumineux avec verre incorpore =

    Science.gov (United States)

    El Mansouri, Souleimane

    Dans le domaine viscoelastique lineaire (VEL, domaine des petites deformations), le comportement thermomecanique du bitume et du mastic bitumineux (melange uniforme de bitume et de fillers) a ete caracterise au Laboratoire des Chaussees et Materiaux Bitumineux (LCMB) de l'Ecole de technologie superieure (ETS) avec l'appui de nos partenaires externes : la Societe des Alcools du Quebec (SAQ) et Eco Entreprises Quebec (EEQ). Les proprietes rheologiques des bitumes et des mastics ont ete mesurees grâce a un nouvel outil d'investigation appele, Rheometre a Cisaillement Annulaire (RCA), sous differentes conditions de chargement. Cet appareil permet non seulement de solliciter des eprouvettes de tailles importantes par rapport a celles utilisees lors des essais classiques, mais aussi d'effectuer des essais en conditions quasi-homogenes, ce qui permet de donner acces a la loi de comportement des materiaux. Les essais sont realises sur une large gamme de temperatures et de frequences (de -15 °C a 45°C et de 0,03Hz a 10 Hz). Cette etude a ete menee principalement pour comparer le comportement d'un bitume avec celui d'un mastic bitumineux dans le domaine des petites deformations. neanmoins, dans une seconde perspective, on s'interesse a l'influence des fillers de verre de post-consommation sur le comportement d'un mastic a faibles niveaux de deformations en comparant l'evolution des modules complexes de cisaillements (G*) d'un mastic avec fillers de verre et un mastic avec fillers conventionnels (calcaire). Enfin, le modele analogique 2S2P1D est utilise pour simuler le comportement viscoelastique lineaire des bitumes et des mastics bitumineux testes lors de la campagne experimentale.

  2. Comportement expérimental aux cisaillements roulant et de voile de ...

    African Journals Online (AJOL)

    dans le sens de la longueur du panneau (L) et pour moitié dans le sens perpendiculaire ou transversal (T) en utilisant deux dispositifs ... Le sens de la découpe influe peu sur la résistance au cisaillement laquelle montre une augmentation avec .... L'objectif de ce travail est de déterminer la résistance aux cisaillements ...

  3. Electrical resistivity of liquid Ag-Au alloy

    International Nuclear Information System (INIS)

    Anis Alam, M.; Tomak, M.

    1983-01-01

    Calculations of the dependence of the electrical resistivity in liquid Ag-Au binary alloy on composition are reported. The structure of the binary alloy is described as a hard-sphere system. A one-parameter local pseudopotential, which incorporates s-d hybridization effects phenomenologically, is employed in the resistivity calculation. A reasonable agreement with experimental trend is observed. (author)

  4. Comportement expérimental aux cisaillements roulant et de voile de ...

    African Journals Online (AJOL)

    136. 1. INTRODUCTION. Considéré comme un matériau renouvelable et .... dissipation d'énergie élevées. C'est pour cette raison que les ..... 0,62. 0,85. Tableau 5 : Valeurs moyennes de l'énergie de rupture W en cisaillement voile. Energie de rupture. (Joules). Milieu anhydre. (0,7%). Milieu ambiant. (8,8%). Milieu humide.

  5. Resistance aux antibiotiques des bacteries isolees en 2009 au ...

    African Journals Online (AJOL)

    Objectif : Contribuer à la surveillance de la résistance bactérienne aux antibiotiques au Togo en étudiant la résistance aux antibiotiques des bactéries. Méthode Il s'agit d'une étude descriptive transversale portant sur les comptes rendus des antibiogrammes réalisés du 1er janvier au 31 décembre 2009 au Laboratoire de ...

  6. Temperature dependence of residual electrical resistivity of Cu-Au in pseudopotential approximation

    International Nuclear Information System (INIS)

    Khwaja, F.A.; Ahmed, I.; Shaukat, A.

    1986-08-01

    The problem of temperature dependence of residual electrical resistivity of Cu-Au system is re-examined in the light of static distortion and thermal vibration of the lattice along with the short-range-order of atoms above critical temperature. The extended version of Ziman's formula for resistivity obtained yields a unified version for the calculation of resistivity in pseudopotential approximation. The temperature dependence of the quantity Δρ/ρ in this framework for Cu-Au system is found to be in better agreement with the experimental data as compared to previous calculation. (author)

  7. Effect of High Pressure on Resistance in Au(dmit)2 LB Films

    Science.gov (United States)

    Miura, Y. F.; Hasegawa, H.; Torizuka, K.; Uwatoko, Y.

    2017-11-01

    The high pressure effect on resistance of the LB film of ditetradecyldimethylammonium-Au(dmit)2 [2C14N+Me2-Au(dmit)2] salt has been investigated; the measurements were performed down to 0.8 K and pressures up to 1.03 GPa using a clamptype pressure cell. The resistance gradually decreases with increasing pressure reaching a 57% smaller value at 1.03 GPa compared to the ambient one. The resistance increases with decreasing temperature for three different conditions of the measurement: at 0 GPa and under pressure (clamped at 0.80 GPa and 1.03 GPa) in the temperature range of 18‑295 K. Over the whole temperature range, the higher the pressure is, the lower the sheet resistance is, indicating that the application of pressure is effective to reduce the sheet resistance. Although we have already reported the magnetic anomaly suggesting the Meissner state in the LB film below 3.9 K, no resistance drop is observed even if the resistance was measured down to 0.8 K.

  8. Investigation of series resistance and surface states in Au/n - GaP structures

    International Nuclear Information System (INIS)

    Kiymaz, A.; Onal, B.; Ozer, M.; Acar, S.

    2009-01-01

    The variation in series resistance and surface state density of Au/n - GaP Schottky diodes have been systematically investigated at room temperature by using capacitance-voltage C-V and conductance-voltage G/w-V measurements techniques. The C-V and G/w-V characteristics of these devices were investigated by considering series resistance effects in a wide frequency range. It is shown that the capacitance of the Au/n - GaP Schottky diode decreases with increasing frequency. It is assumed that the surface states were responsible for this behaviour. The distribution profile of Rs-V gives a peak in the depletion region at low frequencies and disappears with increasing frequencies

  9. Controllable resistive switching in Au/Nb:SrTiO3 microscopic Schottky junctions

    Science.gov (United States)

    Wang, Yuhang; Shi, Xiaolan; Zhao, Kehan; Xie, Guanlin; Huang, Siyu; Zhang, Liuwan

    2016-02-01

    The reversible resistive switching effect at oxide interface shows promising applications in information storage and artificial intelligence. However, the microscopic switching mechanism is still elusive due to the difficulty of direct observation of the electrical and chemical behavior at the buried interface, which becomes a major barrier to design reliable, scalable, and reproducible devices. Here we used a gold-coated AFM tip as a removable electrode to investigate the resistive switching effect in a microscopic Au/Nb:SrTiO3 Schottky junction. We found that unlike the inhomogeneous random resistive switching in the macroscopic Schottky junctions, the high and low resistance states can be reversibly switched in a controllable way on the Nb-doped SrTiO3 surface by the conductive tip. The switching between the high and low resistance states in vacuum is accompanied by the reversible shift of the surface Fermi level. We indicate that the transfer of the interface oxygen ion in a double-well potential is responsible for the resistive switching in both macroscopic and microscopic Schottky junctions. Our findings provide a guide to optimize the key performance parameters of a resistive switching device such as operation voltage, switching speed, on/off ratio, and state retention time by proper electrode selection and fabrication strategy.

  10. Improvement of the wear resistance of electroplated Au-Ni coatings by Zr ion bombardment of Ni-B sublayer

    International Nuclear Information System (INIS)

    Lyazgin, Alexander; Shugurov, Artur; Sergeev, Viktor; Neufeld, Vasily; Panin, Alexey; Shesterikov, Evgeny

    2015-01-01

    The effect of bombardment of the Ni-B sublayer by Zr ion beams on the surface morphology and tribomechanical properties of Au-Ni coatings was investigated. It was found that the treatment has no significant effect on the surface roughness and grain size of the Au-Ni coatings, while it provides essential reducing of their friction coefficient and improvement of wear resistance. It is shown that increased wear resistance of these coatings was caused by their strain hardening resulted from localization of plastic strain. The optimal Zr fluence were determined that provide the maximum reduction of linear wear of the coatings

  11. Renewable energy sources: resistance to change; Energies renouvelables: les resistances au changement

    Energy Technology Data Exchange (ETDEWEB)

    Dubreuil, Th.; Audrain-Demey, G.; Attal, J.Ph.; Lormeteau, B. [Nantes Univ., Droit de l' Environnement et du Developpement Durable, 44 (France)

    2011-10-15

    This paper is the summary of a conference day organised by the students of the 'environment and sustainable development law' Master of Nantes university (France). This interdisciplinary meeting brought together professionals of renewable energy industries who could testify about the resistance of both politicians and the public opinion against the energy transition towards renewable sources. Legal, political, sociological and cultural considerations are put forward to explain this resistance. The French specificity, with an over-representation of nuclear energy, a constraining legal framework for renewable energies, a regional opposition to renewable energy projects (NIMBY syndrome), and a lack of trust in the political class and in its representatives are as many factors that have contributed to build this French 'cultural exception'. (J.S.)

  12. Sulfuration resistance of five experimental Ag-Pd-Au-Cu alloys with low Pd content of 10 or 12%.

    Science.gov (United States)

    Saitoh, Setsuo; Araki, Yoshima; Taira, Masayuki

    2006-06-01

    Commercial Ag-based alloy (46Ag-20Pd-12Au-20Cu alloy) is widely used in Japan as a casting alloy. As opposed to the commercial composition, we prepared five experimental Ag-based alloys with reduced Pd content of 10 or 12%, increased Au content of 20 to 30%, and reduced Cu content of 12 to 20%. We then evaluated their sulfuration resistance by analyzing cast specimen surfaces dipped in 0.1% Na2S solution with SEM/EPMA, TF-XRD, and XPS. It became evident that all alloys were susceptible to sulfuration in the segregated Ag-rich Pd-poor phases. The degree and speed of sulfuration, however, differed among the six alloys examined. In particular, one experimental alloy (46Ag-10Pd-30Au-12Cu) possessed a sulfuration resistance equal or superior to that of commercial Ag-based alloy, while the other four experimental alloys were inferior in sulfuration resistance. Based on the results of this study, we concluded that our newly developed 46Ag-10Pd-30Au-12Cu alloy could be employed as a new sulfuration-resistant Ag-based casting alloy--which is especially useful if the price of Pd is skyrocketing again.

  13. PdAgAu alloy with high resistance to corrosion by H2S

    Energy Technology Data Exchange (ETDEWEB)

    Braun, Fernando [Inst. de Investigaciones en Catalisis y Petroquimica, Santa Fe (Argentina); Miller, James B. [Carnegie Mellon Univ., Pittsburgh, PA (United States). Dept. of Chemical Engineering; National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Gellman, Andrew J. [Carnegie Mellon Univ., Pittsburgh, PA (United States). Dept. of Chemical Engineering; National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Tarditi, Ana M. [Inst. de Investigaciones en Catalisis y Petroquimica, Santa Fe (Argentina); Fleutot, Benoit [Carnegie Mellon Univ., Pittsburgh, PA (United States). Dept. of Chemical Engineering; Kondratyuk, Petro [Carnegie Mellon Univ., Pittsburgh, PA (United States). Dept. of Chemical Engineering; National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Cornaglia, Laura M. [Inst. de Investigaciones en Catalisis y Petroquimica, Santa Fe (Argentina)

    2012-12-01

    PdAgAu alloy films were prepared on porous stainless steel supports by sequential electroless deposition. Two specific compositions, Pd83Ag2Au15 and Pd74Ag14Au12, were studied for their sulfur tolerance. The alloys and a reference Pd foil were exposed to 1000 H2S /H2 at 623 K for periods of 3 and 30 hours. The microstructure, morphology and bulk composition of both nonexposed and H2S-exposed samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). XRD and SEM analysis revealed time-dependent growth of a bulk Pd{sub 4}S phase on the Pd foil during H2S exposure. In contrast, the PdAgAu ternary alloys displayed the same FCC structure before and after H2S exposure. In agreement with the XRD and SEM results, sulfur was not detected in the bulk of either ternary alloy samples by EDS, even after 30 hours of H2S exposure. X-ray photoelectron spectroscopy (XPS) depth profiles were acquired for both PdAgAu alloys after 3 and 30 hours of exposure to characterize sulfur contamination near their surfaces. Very low S 2p and S 2s XPS signals were observed at the top-surfaces of the PdAgAu alloys, and those signals disappeared before the etch depth reached ~ 10 nm, even for samples exposed to H2S for 30 hours. The depth profile analyses also revealed silver and gold segregation to the surface of the alloys; preferential location of Au on the alloys surface may be related to their resistance to bulk sulfide formation. In preliminary tests, a PdAgAu alloy membrane displayed higher initial H{sub 2} permeability than a similarly prepared pure Pd sample and, consistent with resistance to bulk sulfide formation, lower permeability loss in H2S than pure Pd.

  14. Fatigue resistance of cast occlusal rests using Co-Cr and Ag-Pd-Cu-Au alloys.

    Science.gov (United States)

    Gapido, Cynthia G; Kobayashi, Hiroshi; Miyakawa, Osamu; Kohno, Shoji

    2003-09-01

    Fatigue failure in a removable partial denture framework includes fracture of the occlusal rest at the rest-minor connector angle. This in vitro study evaluated the fatigue resistance of 0.8-mm-thick occlusal rests cast with Co-Cr and Ag-Pd-Cu-Au alloys. The specimen consisted of occlusal rest (0.8 x 2.0 x 10 mm), vertical minor connector (0.9 x 2.0 x 5.0 mm), and denture base connector (1.5 x 5.0 x 25 mm). Twenty-five specimens each were cast with Co-Cr and Ag-Pd-Cu-Au alloys. From each group, 5 specimens were subjected to a load-deflection test conducted to determine the amount of deflection to be used in fatigue test. The fatigue test was performed such that the occlusal rest component was deflected by displacing the denture base component in a tissueward direction. Predetermined denture base displacement values of 0.25 and 0.49 mm for Co-Cr and Ag-Pd-Cu-Au specimens, respectively, were repeated at a rate of 500 cycles/min by use of a displacement-controlled fatigue testing machine, until occlusal rest failure occurred or a preset limit of 2 million cycles was achieved. The survival rates of the occlusal rests were calculated assuming a chewing cycle of 2 x 10(5) per year. Scanning electron microscopy (SEM) photographs were made to examine the fracture surfaces and to identify casting defects. The relationship between fatigue cycles and number of casting defects was determined by Spearman rank correlation analysis (PAg-Pd-Cu-Au specimens fractured. After 3 years of simulated clinical use, only 50% of the Ag-Pd-Cu-Au occlusal rests survived. Statistical analysis showed that the fatigue cycles and number of casting defects were inversely related (PAg-Pd-Cu Au fatigue fracture surface consisted of smooth propagation and dimpled and smooth final fracture areas. This study suggests that cast Co-Cr rests are more rigid and fatigue resistant than Ag-Pd-Cu-Au rests. The fatigue resistance of 0.8-mm-thick occlusal rests may be adequate if cast with Co-Cr alloy. An

  15. The effect of the electron irradiation on the series resistance of Au/Ni/6H-SiC and Au/Ni/4H-SiC Schottky contacts

    International Nuclear Information System (INIS)

    Cinar, Kuebra; Coskun, C.; Aydogan, S.; Asil, Hatice; Guer, Emre

    2010-01-01

    The effect of electron irradiation on Au/Ni/6H-SiC and Au/Ni/4H-SiC Schottky contacts has been studied by current voltage (I-V) characterization at room temperature. The diodes have been subjected to the electron irradiation at various energies (6, 12 and 15 MeV) and influence of the electron irradiation on the diode parameters such as barrier height, ideality factor, and series resistance has been studied. Cheung functions, Norde model and conductance method have been used to determine the diode parameters. The ideality factor of the diodes is greater than unity indicating activation of some other current transport mechanism(s). The series resistances of the diodes increase by increasing electron energy. The reverse current increases for the Au/Ni/6H-SiC diode after each electron irradiation experiment, while decreasing trend is observed for Au/Ni/4H-SiC diode. Decrease in the barrier height of Au/Ni/4H-SiC diode is observed and mainly attributed to the increase of the reverse current, while the decrease of the forward current is caused by increase in series resistance, for high electron irradiation energies.

  16. The effect of the electron irradiation on the series resistance of Au/Ni/6H-SiC and Au/Ni/4H-SiC Schottky contacts

    Energy Technology Data Exchange (ETDEWEB)

    Cinar, Kuebra [Department of Physics, Faculty of Sciences, Atatuerk University, 25240 Erzurum (Turkey); Coskun, C., E-mail: ccoskun@atauni.edu.t [Department of Physics, Faculty of Sciences, Atatuerk University, 25240 Erzurum (Turkey); Aydogan, S.; Asil, Hatice; Guer, Emre [Department of Physics, Faculty of Sciences, Atatuerk University, 25240 Erzurum (Turkey)

    2010-03-15

    The effect of electron irradiation on Au/Ni/6H-SiC and Au/Ni/4H-SiC Schottky contacts has been studied by current voltage (I-V) characterization at room temperature. The diodes have been subjected to the electron irradiation at various energies (6, 12 and 15 MeV) and influence of the electron irradiation on the diode parameters such as barrier height, ideality factor, and series resistance has been studied. Cheung functions, Norde model and conductance method have been used to determine the diode parameters. The ideality factor of the diodes is greater than unity indicating activation of some other current transport mechanism(s). The series resistances of the diodes increase by increasing electron energy. The reverse current increases for the Au/Ni/6H-SiC diode after each electron irradiation experiment, while decreasing trend is observed for Au/Ni/4H-SiC diode. Decrease in the barrier height of Au/Ni/4H-SiC diode is observed and mainly attributed to the increase of the reverse current, while the decrease of the forward current is caused by increase in series resistance, for high electron irradiation energies.

  17. influence de la phosphatation au zinc sur la resistance a la co

    African Journals Online (AJOL)

    AKA Boko Mathieu

    de trois micromètres. Cette constatation se manifeste également lors du comportement anodique. Mots-clés:Phosphatation au zinc, corrosion, acier XC N10, milieu marin (NaCl 3%). ... sa préparation : ce sont en général des traitements thermiques qui provoquent ... phénomène d'oxydation à froid bien connu « la rouille » ;.

  18. Dispersion de charges agglomérées dans une matrice polymère sous l'action d'un champ de cisaillement

    OpenAIRE

    Collin , Véronique; Roux , Céline; Navard , Patrick; Peuvrel-Disdier , Edith

    2009-01-01

    International audience; Une cellule contra-rotative transparente couplée à un microscope optique a été utilisée pour étudier les mécanismes de dispersion d'une charge agglomérée dans une matrice soumise à un cisaillement. Le comportement d'un noir de carbone et de deux silices de précipitation dans une matrice élastomère commune est comparé. Différents mécanismes de dispersion sont observés en fonction des caractéristiques de la charge. L'origine de ces différences de comportement mécanique e...

  19. Contact resistance and stability study for Au, Ti, Hf and Ni contacts on thin-film Mg2Si

    KAUST Repository

    Zhang, Bo

    2016-12-28

    We present a detailed study of post-deposition annealing effects on contact resistance of Au, Ti, Hf and Ni electrodes on Mg2Si thin films. Thin-film Mg2Si and metal contacts were deposited using magnetron sputtering. Various post-annealing temperatures were studied to determine the thermal stability of each contact metal. The specific contact resistivity (SCR) was determined using the Cross Bridge Kelvin Resistor (CBKR) method. Ni contacts exhibits the best thermal stability, maintaining stability up to 400 °C, with a SCR of approximately 10−2 Ω-cm2 after annealing. The increased SCR after high temperature annealing is correlated with the formation of a Mg-Si-Ni mixture identified by cross-sectional scanning transmission electron microscopy (STEM) characterization, X-ray diffraction characterization (XRD) and other elemental analyses. The formation of this Mg-Si-Ni mixture is attributed to Ni diffusion and its reaction with the Mg2Si film.

  20. Multilevel resistance switching effect in Au/La2/3Ba1/3MnO3/Pt heterostructure manipulated by external fields

    Science.gov (United States)

    Wen, Jiahong; Zhao, Xiaoyu; Li, Qian; Zhang, Sheng; Wang, Dunhui; Du, Youwei

    2018-04-01

    Multilevel resistance switching (RS) effect has attracted more and more attention due to its promising potential for the increase of storage density in memory devices. In this work, the transport properties are investigated in an Au/La2/3Ba1/3MnO3 (LBMO)/Pt heterostructure. Taking advantage of the strong interplay among the spin, charge, orbital and lattice of LBMO, the Au/LBMO/Pt device can exhibit bipolar RS effect and magnetoresistance effect simultaneously. Under the coaction of electric field and magnetic field, four different resistance states are achieved in this device. These resistance states show excellent repeatability and retentivity and can be switched between any two states, which suggest the potential applications in the multilevel RS memory devices with enhanced storage density.

  1. Effects of Au and Pd Additions on Joint Strength, Electrical Resistivity, and Ion-Migration Tolerance in Low-Temperature Sintering Bonding Using Ag2O Paste

    Science.gov (United States)

    Ito, Takeyasu; Ogura, Tomo; Hirose, Akio

    2012-09-01

    A new bonding process using an Ag2O paste consisting of Ag2O particles mixed with a triethylene glycol reducing agent has been proposed as an alternative joining approach for microsoldering in electronics assembly, which currently uses Pb-rich, high-temperature solders. Ag nanoparticles were formed at approximately 130°C to 160°C through a reduction process, sintered to one another immediately, and bonded to a metal substrate. An Au-coated Cu specimen was successfully bonded using the Ag2O paste. The resulting joint exhibited superior strength compared with joints fabricated using conventional Pb-rich solders. To improve ion-migration tolerance, the Ag2O paste was mixed with Au and Pd microparticles to form sintered Ag-Au and Ag-Pd layers, respectively. The additions of Au and Pd improved the ion-migration tolerance of the joint. Regarding the mechanical properties of the joints, addition of secondary Au and Pd both resulted in decreased joint strength. To match the joint strength of conventional Pb-10Sn solder, the mixing ratios of Au and Pd were estimated to be limited to 16 vol.% and 7 vol.%, respectively. The electrical resistivities of the sintered layers consisting of 16 vol.% Au and 7 vol.% Pd were lower than that of Pb-10Sn solder. Thus, the additive fractions of Au and Pd to the Ag2O paste should be less than 16 vol.% and 7 vol.%, respectively, to avoid compromising the mechanical and electrical properties of the sintered layer relative to those of contemporary Pb-10Sn solder. Following the addition of Au and Pd to the paste, the ion-migration tolerances of the sintered layers were approximately 3 and 2 times higher than that of pure Ag, respectively. Thus, the addition of Au was found to improve the ion-migration tolerance of the sintered Ag layer more effectively and with less sacrifice of the mechanical and electrical properties of the sintered layer than the addition of Pd.

  2. Treatment outcomes for patients with multidrug-resistant tuberculosis in post-earthquake Port-au-Prince, Haiti.

    Science.gov (United States)

    Charles, Macarthur; Vilbrun, Stalz Charles; Koenig, Serena P; Hashiguchi, Lauren M; Mabou, Marie Marcelle; Ocheretina, Oksana; Pape, Jean W

    2014-10-01

    We report outcomes and 12-month survival for the first cohort of patients to undergo multidrug-resistant tuberculosis (MDR-TB) treatment after the earthquake in Haiti. From March 3, 2010 to March 28, 2013, 110 patients initiated treatment of laboratory-confirmed MDR-TB at the Groupe Haïtien d'Etude du Sarcome de Kaposi et des Infections Opportunistes (GHESKIO) Center in Port-au-Prince, Haiti. Twenty-seven patients (25%) were human immunodeficiency virus (HIV)-positive. As of October 31, 2013, 95 (86%) patients were either cured or alive on treatment, 4 (4%) patients defaulted, and 11 (10%) patients died. Culture conversion occurred by 30 days in 14 (13%) patients, 60 days in 49 (45%) patients, and 90 days in 81 (74%) patients. The probabilities of survival to 12 months were 96% (95% confidence interval [95% CI] = 89-99) and 85% (95% CI = 64-94) for HIV-negative and -positive patients, respectively. Despite adverse conditions, outcomes for patients with MDR-TB are highly encouraging. Major efforts are underway to scale up community directly observed therapy and expand care to other regions of Haiti. © The American Society of Tropical Medicine and Hygiene.

  3. Fabrication of Au nanoparticle/double-walled carbon nanotube film/TiO{sub 2} nanotube array/Ti heterojunctions with low resistance state for broadband photodetectors

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Yan [School of Mathematics and Physics, Mianyang Teachers’ College (Mianyang Normal University), Mianyang 621000 (China); Zhang, Guowei; Dong, Zhanmin [Department of Physics and State Key Lab of Low-Dimensional Quantum Physics, Tsinghua University, Beijing100084 (China); Wei, Jinquan [Key Laboratory for Advanced Materials Processing Technology of Education Ministry, School of Materials Science and Engineering, Tsinghua University, Beijing100084 (China); Zhu, Jia-Lin [Department of Physics and State Key Lab of Low-Dimensional Quantum Physics, Tsinghua University, Beijing100084 (China); Sun, Jia-Lin, E-mail: jlsun@tsinghua.edu.cn [Department of Physics and State Key Lab of Low-Dimensional Quantum Physics, Tsinghua University, Beijing100084 (China); Collaborative Innovation Center of Quantum Matter, Beijing (China)

    2017-03-01

    A broadband photodetector based on Au nanoparticle/double-walled carbon nanotube film/TiO{sub 2} nanotube array /Ti multilayer heterojunction structures has been fabricated. A pre-electroforming process at a voltage bias of 35 V was used to switch the photodetector from a high resistance state to a low resistance state. At a voltage bias of 1 V under 532-nm laser illumination in air, the photoresponsivity of the device reached 15.41 mA W{sup −1}, which is enhanced by approximately 1.91 times when compared with that of device before deposition of Au nanoparticles. In addition, in a vacuum under a voltage bias of 1 V, the photoresponsivity of the device reached 23.29 mA W{sup −1} and 6.85 mA W{sup −1} at 532 nm and 1064 nm, respectively. The surface plasmon polaritons of the Au nanoparticles allowed extension of the sensitivity of the photosensitive regions into the mid-infrared range. The experimental results show that the device photoresponsivity reached 2.26 mA W{sup −1} at a voltage bias of 1 V under 10.6-µm laser illumination in air.

  4. Effect of heat treatment on impact resistance of AU5GT and AS7G06 aluminum alloys

    Energy Technology Data Exchange (ETDEWEB)

    Muzamil, Muhammad; Akhtar, Maaz; Samiuddin, Muhammad; Mehdi, Murtuza [NED University of Engineering and Technology, Karachi (Pakistan)

    2016-10-15

    Impact strength is one of the major mechanical properties that a material should possess in order to absorb sudden changes in the load intensity. The objective of current study is to compare the impact strength of two material (AU5GT and AS7G06), which are used in different structural applications. Almost no work is available which compares the impact strength of selected grade alloys along with different heat treatment cycles. Specimens are heat treated first as per designed cycles, later impact testing is performed. Charpy impact test is conducted in accordance with ASTM E23-12 standard method on three samples with and without heat treatment for each cycle. Solutionizing on samples is done at constant time and temperature to achieve homogenization. Later, aging is conducted at different temperatures ranging from 100-200°C (different intervals) at constant time to find the effect of precipitation hardness that actually increases the strength. Sample hardness is determined using Vickers micro hardness testing machine for each heat treatment cycle. Charpy test results provided the impact energy that is used to determine the strength before fracture. Heat treated samples have showed increase in impact strength for AS7G06 aluminum alloy while AU5GT shows very little change. This is because of growing the precipitation with respect to temperature, which resulted in more hard regions across grains. Hardness also shows an increasing relationship, as expected. Fracture surfaces are analyzed on stereo microscopy and Scanning electron microscopy (SEM) to find the final mode of fracture, that is brittle, ductile or transitional (combination of both brittle and ductile)

  5. Alteration hydrothermale et deformation ductile des roches volcaniques acides associees au gisement sulfure de draa sfar (Jebilet Centrales, Maroc

    Directory of Open Access Journals (Sweden)

    Zinbi, Y.

    2005-12-01

    Full Text Available The volcanics and volcanoclastic rocks of Draa Sfar (Central Jebilet, Moroccan hercynian belt are affected by ductile stress and hydrothermal alteration accompanied by a weak degree of metamorphism (greenschist facies. Some N-S oriented shearing zones, affect locally these formations while being the site of an important hydrothermal activity. The consequences of these transformations from a non to slightly- deformed rhyodacite, show that through these ductile shearing zones: (1 the mineralogical assemblage of hydrothermal alteration is essentially formed by chlorite, sericite, quartz and magnetite; (2 the gradual increase of the alteration indexes is accompanied by the destruction of the phenocrists and the recrystallization of the matrix by phyllosilicates and quartz; (3 the progressive transfer of material is more intense in the more deformed zones where the values of Ti, Al and Zr remain constant. These shearing zones played a very important role in the circulation of fluids and the transformation of the rhyodacite of Draa Sfar.Les roches volcaniques et volcanoclastiques de Draa Sfar (Jebilet centrales, Maroc hercynien sont affectées par une déformation ductile accompagnée d’un métamorphisme de faible degré (faciès schistes verts et d’une altération hydrothermale. Des zones de cisaillement de direction N-S, ont affecté localement ces formations tout en étant vecteurs d’une importante activité hydrothermale. Le suivi de ces transformations à partir de la rhyodacite non ou peu déformée, montre qu’à travers ces zones de cisaillements ductiles : (1 l’assemblage minéralogique d’altération hydrothermale est formé essentiellement de chlorite, de séricite, de quartz et de magnétite ; (2 l’augmentation graduelle des indices d’altération s’exprime par la destruction des phénocristaux au profit d’une matrice recristallisée en phyllosilicates et quartz ; (3 le transfert progressif de la matière est plus intense

  6. Women's Occupational Health: Resisting When We Can: Santé des femmes au travail: mobiliser quand c'est encore possible.

    Science.gov (United States)

    Riel, Jessica; Saint-Charles, Johanne; Messing, Karen

    2017-11-01

    The continuing worldwide struggle for decent working conditions is under intense economic, social, and political pressures. Women are particularly affected by these pressures because of their still-tenuous position in the service sector, in lowprestige, low-paid occupations. In addition, their occupational health issues are often overlooked or minimized. Nevertheless, women continue to struggle, as individuals and collectively. This issue describes a number of instances where women in the Québec labor movement have attempted to reconcile equality concerns with protecting their own health. There are successes, failures, and puzzles. Résumé La lutte mondiale pour des conditions de travail décentes subit d'intenses pressions économiques, sociales et politiques. Les femmes sont particulièrement touchées par ces pressions à cause de leur situation encore fragile dans le secteur des services, dans des professions de faible prestige et salaire. De plus, leurs besoins en santé au travail sont souvent minimisés ou ignorés. Toutefois, les femmes continuent à résister, individuellement et collectivement. Ce numéro décrit un certain nombre d'exemples où des travailleuses militantes ont tenté de concilier leurs revendications d'égalité et d'accès au travail avec leur besoin de protéger leur santé.

  7. 3D inversion of magnetic and electrical resistivity-induced polarization data for an epithermal Au-Ag and underlying porphyry deposit: A case study from British Columbia, Canada

    Science.gov (United States)

    Abbassi, B.; Huebert, J.; Liu, L.; Lee, B.; Cheng, L.; Richards, J. P.; Unsworth, M. J.; Oldenburg, D.

    2013-12-01

    The Newton property is an epithermal Au-Ag deposit containing precious metals in association with disseminated sulfide minerals such as pyrite. This type of deposit often shows variable geological patterns, so it is important to find fast and cost-efficient methods for their exploration. Aeromagnetic surveys and ground electrical resistivity-induced polarization methods were applied over the Newton property. From preliminary 3D inversion of ZTEM and aeromagnetic data, and joint 3D inversion of electrical resistivity-induced polarization data, we show that low-resistivity and high-chargeability regions are signatures of disseminated sulfide mineralization. Potassic alteration, characterized by hydrothermal biotite (now mostly chloritized) and magnetite is also present locally, and may be related to underlying porphyry-type mineralization. This type of alteration can be identified from its magnetic signature, but the occurrence of other magnetic formations in the deposit area made interpretations of magnetic data difficult. We show that filtering geological noises related to background magnetic anomalies is an essential step in focusing on potassic alteration zones. We used electrical resistivity and induced polarization chargeability models to remove the signals of barren magnetic zones to focus on the susceptibilities pertaining to deep potassic alterations. In order to test the credibility of these interpretations, extensive petrophysical measurements (magnetic susceptibility, electrical resistivity, and gamma ray spectra) were collected on drill-core samples. We show that potassic alteration can also be characterized accurately from high levels of potassium to thorium ratio (K/Th) in gamma ray spectrometric measurements, and that this correlation is stronger than the magnetic signal (likely because hydrothermal magnetite is variable in abundance). Therefore, we focused on magnetic susceptibility values correlated with high K/Th ratios in order to reduce the

  8. Resistance varietale de la luzerne au nematode des tiges Ditylenchus dipsaci (Kuhn) Filipjev. Test d'evaluation et application en selection

    OpenAIRE

    Leclercq, D.; Caubel, G.

    1991-01-01

    La résistance variétale à Ditylenchus dipsaci chez la luzerne est évaluée par un test de dépistage au stade plantule, fondé sur la caractérisation des symptômes exprimés après l’inoculation artificielle. La méthode employée présente certains facteurs de variabilité qui ont été étudiés. Ainsi, les symptômes à rechercher ont été précisés, les effets notateur et date de notation déterminés. Il n’a pas été décelé de «pathotypes» de nématodes se multipliant sur les génotypes habituellement rés...

  9. Au pair trajectories

    DEFF Research Database (Denmark)

    Dalgas, Karina Märcher

    2015-01-01

    Since 2000, thousands of young Filipino migrants have come to Denmark as au pairs. Officially, they are there to “broaden their cultural horizons” by living temporarily with a Danish host family, but they also conduct domestic labor in exchange for food and money, which allows them to send...... of their Danish host families. Based on their migratory status as au pairs, these young migrants must therefore negotiate the different moral and contractual rights and obligations that characterize the local and transnational family ties in which they are engaged. This study of Filipina au pair migration through...... pair-sending families in the Philippines, this dissertation examines the long-term trajectories of these young Filipinas. It shows how the au pairs’ local and transnational family relations develop over time and greatly influence their life trajectories. A focal point of the study is how au pairs...

  10. Properties of transparent and conductive Al:ZnO/Au/Al:ZnO multilayers on flexible PET substrates

    International Nuclear Information System (INIS)

    Dimopoulos, T.; Bauch, M.; Wibowo, R.A.; Bansal, N.; Hamid, R.; Auer, M.; Jäger, M.; List-Kratochvil, E.J.W.

    2015-01-01

    Highlights: • Transparent, low resistive AZO/Au/AZO layers were sputtered on PET substrates. • AZO/Au/AZO has higher figure of merit than ITO for specific Au thicknesses. • The resistance of AZO/Au/AZO is stable against repetitive substrate bending. • AZO/Au/AZO electrode performance is comparable to ITO in light emitting diodes. - Abstract: We investigate the structural, electrical and optical properties of transparent electrodes, consisting of Al-doped ZnO (AZO) and ultrathin Au layers, sputtered on polyethylene terephthalate (PET). These electrodes are relevant for optoelectronic devices and thin film photovoltaics. When deposited on AZO, Au films as thin as 3 nm form electrically conductive, meandering structures, whereas uniform Au films are obtained from a thickness of 5 nm. The sheet resistance decreases with Au thickness, reaching 7 Ω for 11 nm-thick Au. AZO/Au/AZO trilayers combine lowest resistance with highest transparency, while their resistance stability against bending fatigue is superior to the Sn-doped In 2 O 3 (ITO) electrode. The figure of merit of AZO/Au/AZO is larger than of ITO for Au thickness equal to or larger than 9 nm. To demonstrate the applicability of the AZO/Au/AZO transparent electrode, simple organic light emitting diodes were fabricated and tested in comparison to PET/ITO standard substrates

  11. Study and simulation of the resistance of floccules to shear breakage in a centrifuge; Etude et modelisation de la destruction d`agregats de colloides par les contraintes de cisaillement creees dans un separateur centrifuge

    Energy Technology Data Exchange (ETDEWEB)

    Touron, E.

    1995-09-29

    In France, spent fuels are in most cases reprocessed. The aim of the reprocessing is to separate the recyclable fissile materials (uranium, plutonium for instance) of radioactive wastes. The industrial process used until now is the Purex (Plutonium Uranium Refining by EXtraction) process. The two main first steps of this process are nowadays industrially completely controlled. Nevertheless, it exists several secondary operations which can interfere with the good unfolding of this process main steps as for instance, the clarification of the dissolution liquors. The aim of this work is then to improve particularly the separation efficiency between small particles and the associated dissolution liquors. The experimental study of the flow inside the rotor shows complex hydrodynamics arising from turbulence and secondary flows. This turbulent flow is likely to be capable of re-suspending small and flow density particles. The use of flocculants is a way of improving separation efficiencies. In gravity sedimentation, flocculants are frequently used to improve settling of fine particles, by causing them to aggregate behaving as if they were larger. Under slight turbulence, the flocs, which may be fragile, remain intact. In centrifugal sedimentation, shear rates are high and may result in complete floc breakup. Choice of the correct flocculant, proper dosage and right conditioning time result in strong, compact flocs so that flocculants can be used successfully. A diminution of the centrifugal shield from nominal conditions results in a diminution of shear breakage (in the feed zone) so that a total recover of solids may be obtained.(author). 122 refs., 95 figs., 28 tabs.

  12. On the Frequency and Voltage-Dependent Profiles of the Surface States and Series Resistance of Au/ZnO/n-Si Structures in a Wide Range of Frequency and Voltage

    Science.gov (United States)

    Nikravan, Afsoun; Badali, Yosef; Altındal, Şemsettin; Uslu, İbrahim; Orak, İkram

    2017-10-01

    In order to interpret the electrical characteristics of fabricated Au/ZnO/n-Si structures as a function of frequency and voltage well, their capacitance-voltage ( C- V) and conductance-voltage ( G/ ω- V) measurements were carried out in a wide range of frequencies (0.7 kHz-2 MHz) and voltages (± 6 V) by 50 mV steps at room temperature. Both the C- V and G/ ω- V plots have reverse, depletion, and accumulation regions such as a metal-insulator/oxide semiconductor (MIS or MOS) structures. The values of doped-donor atoms ( N D), Fermi energy level ( E F), barrier height (ΦB), and series resistance ( R s) of the structure were obtained as a function of frequency and voltage. While the value of N D decreases with increasing frequency almost as exponentially, the value of depletion width ( W D) increases. The values of C and G/ ω increase with decreasing frequency because the surface states ( N ss) are able to follow the alternating current (AC) signal, resulting in excess capacitance ( C ex) and conductance ( G ex/ ω), which depends on their relaxation time and the frequency of the AC signal. The voltage-dependent profiles of N ss were obtained from both the high-low frequency capacitance and Hill-Colleman methods. The other important parameter R s of the structure was also obtained from the Nicollian and Brews methods as a function of voltage.

  13. Au-Rh and Au-Pd nanocatalysts supported on rutile titania nanorods: structure and chemical stability.

    Science.gov (United States)

    Konuspayeva, Zere; Afanasiev, Pavel; Nguyen, Thanh-Son; Di Felice, Luca; Morfin, Franck; Nguyen, Nhat-Tai; Nelayah, Jaysen; Ricolleau, Christian; Li, Z Y; Yuan, Jun; Berhault, Gilles; Piccolo, Laurent

    2015-11-14

    Au, Rh, Pd, Au-Rh and Au-Pd nanoparticles (NPs) were synthesized by colloidal chemical reduction and immobilized on hydrothermally-prepared rutile titania nanorods. The catalysts were characterized by aberration-corrected TEM/STEM, XPS, and FTIR, and were evaluated in the hydrogenation of tetralin in the presence of H2S. Oxidizing and reducing thermal treatments were employed to remove the polyvinyl alcohol (PVA) surfactant. Reduction in H2 at 350 °C was found efficient for removing the PVA while preserving the size (ca. 3 nm), shape and bimetallic nature of the NPs. While Au-Pd NPs are alloyed at the atomic scale, Au-Rh NPs contain randomly distributed single-phase domains. Calcination-reduction of Au-Rh NPs mostly leads to separated Au and Rh NPs, while pre-reduction generates a well-defined segregated structure with Rh located at the interface between Au and TiO2 and possibly present around the NPs as a thin overlayer. Both the titania support and gold increase the resistance of Rh and Pd to oxidation. Furthermore, although detrimental to tetralin hydrogenation initial activity, gold stabilizes the NPs against surface sulfidation in the presence of 50 ppm H2S, leading to increased catalytic performances of the Au-Rh and Au-Pd systems as compared to their Rh and Pd counterparts.

  14. Electron diffraction on amorphous and crystalline AuAl2 , AuGa2 and AuIn2 thin films

    International Nuclear Information System (INIS)

    Bohorquez, A.

    1991-01-01

    Experimental (in situ) measurements of electron diffraction and resistivity of amorphous and crystalline AuAl 2 , AuGa 2 and AuIn 2 thin films were performed. Thin films were produced by quench condensation. Interference and atomic distribution functions were analyzed assuming the same short range order for the three systems in the amorphous phase. The experimental results do not agree with this assumption, giving evidence that the short range order is not the same for the three amorphous systems. Further discussion of interference and atomic distribution functions shows a more evident tendency in amorphous AuIn 2 where short order of AuIn 2 and In can be inferred. (Author)

  15. @AuAg nanostructures

    Science.gov (United States)

    Singh, Rina; Soni, R. K.

    2014-09-01

    Bimetallic and trimetallic nanoparticles have attracted significant attention in recent times due to their enhanced electrochemical and catalytic properties compared to monometallic nanoparticles. The numerical calculations using Mie theory has been carried out for three-layered metal nanoshell dielectric-metal-metal (DMM) system consisting of a particle with a dielectric core (Al@Al2O3), a middle metal Ag (Au) layer and an outer metal Au (Ag) shell. The results have been interpreted using plasmon hybridization theory. We have also prepared Al@Al2O3@Ag@Au and Al@Al2O3@AgAu triple-layered core-shell or alloy nanostructure by two-step laser ablation method and compared with calculated results. The synthesis involves temporal separations of Al, Ag, and Au deposition for step-by-step formation of triple-layered core-shell structure. To form Al@Ag nanoparticles, we ablated silver for 40 min in aluminium nanoparticle colloidal solution. As aluminium oxidizes easily in water to form alumina, the resulting structure is core-shell Al@Al2O3. The Al@Al2O3 particle acts as a seed for the incoming energetic silver particles for multilayered Al@Al2O3@Ag nanoparticles is formed. The silver target was then replaced by gold target and ablation was carried out for different ablation time using different laser energy for generation of Al@Al2O3@Ag@Au core-shell or Al@Al2O3@AgAu alloy. The formation of core-shell and alloy nanostructure was confirmed by UV-visible spectroscopy. The absorption spectra show shift in plasmon resonance peak of silver to gold in the range 400-520 nm with increasing ablation time suggesting formation of Ag-Au alloy in the presence of alumina particles in the solution.

  16. Spin-glass, antiferromagnetism and Kondo behavior in Ce2Au1 ...

    Indian Academy of Sciences (India)

    report high pressure electrical resistivity of Ce2AuSi3, ac susceptibility (χ) and magnetoresistance of various alloys of this solid solution in order to gain better knowledge of the magnetism of these alloys. High pressure resistivity behavior is consistent with the proposal that Ce2AuSi3 lies at the left-hand side of the maximum ...

  17. High-temperature stability of Au/Pd/Cu and Au/Pd(P)/Cu surface finishes

    Science.gov (United States)

    Ho, C. E.; Hsieh, W. Z.; Lee, P. T.; Huang, Y. H.; Kuo, T. T.

    2018-03-01

    Thermal reliability of Au/Pd/Cu and Au/Pd(4-6 wt.% P)/Cu trilayers in the isothermal annealing at 180 °C were investigated by X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (TOF-SIMS), and transmission electron microscopy (TEM). The pure Pd film possessed a nanocrystalline structure with numerous grain boundaries, thereby facilitating the interdiffusion between Au and Cu. Out-diffusion of Cu through Pd and Au grain boundaries yielded a significant amount of Cu oxides (CuO and Cu2O) over the Au surface and gave rise to void formation in the Cu film. By contrast, the Pd(P) film was amorphous and served as a good diffusion barrier against Cu diffusion. The results of this study indicated that amorphous Pd(P) possessed better oxidation resistance and thermal reliability than crystalline Pd.

  18. Catalytic activity of Au nanoparticles

    DEFF Research Database (Denmark)

    Larsen, Britt Hvolbæk; Janssens, Ton V.W.; Clausen, Bjerne

    2007-01-01

    Au is usually viewed as an inert metal, but surprisingly it has been found that Au nanoparticles less than 3–5 nm in diameter are catalytically active for several chemical reactions. We discuss the origin of this effect, focusing on the way in which the chemical activity of Au may change with par......Au is usually viewed as an inert metal, but surprisingly it has been found that Au nanoparticles less than 3–5 nm in diameter are catalytically active for several chemical reactions. We discuss the origin of this effect, focusing on the way in which the chemical activity of Au may change...

  19. Preparation of 198Au free from 199Au

    International Nuclear Information System (INIS)

    Capgras, A.

    1967-01-01

    The necessity of obtaining 198 Au free from 199 Au has led us to carry out irradiations using cadmium. The spectra obtained using irradiated detectors with or without cadmium have confirmed the validity of the method. Under the same irradiation conditions the ratio 199 Au/ 198 Au in the first case is of the order of 8 per cent; in the second case this ratio is less than 0.1 per cent. (author) [fr

  20. Intensity (a.u)

    Indian Academy of Sciences (India)

    Administrator

    Supplementary Information. Fig. S1. Powder X-ray diffraction pattern (Cu Kα) for AlPO-5: (a) as prepared, (b) calcined and (c) simulated [Ref. 27]. 10. 20. 30. 40. 50. Intensity (a.u) b c a. 2θ ...

  1. Au pairs on Facebook

    DEFF Research Database (Denmark)

    Dalgas, Karina Märcher

    2016-01-01

    that engagement with Facebook as a methodological tool can be useful in research among migrants in highly politicised fields. Pointing to a discursive construction of Filipina au pairs as victims of labour exploitation, the article shows how fieldwork on Facebook enables the exploration of the ways in which...

  2. Magnetic susceptibilities of liquid Cr-Au, Mn-Au and Fe-Au alloys

    Energy Technology Data Exchange (ETDEWEB)

    Ohno, S.; Shimakura, H. [Niigata University of Pharmacy and Applied Life Sciences, Higashijima, Akiha-ku, Niigata 956-8603 (Japan); Tahara, S. [Faculty of Science, University of the Ryukyus, Nishihara-cho, Okinawa 903-0213 (Japan); Okada, T. [Niigata College of Technology, Kamishin’eicho, Nishi-ku, Niigata 950-2076 (Japan)

    2015-08-17

    The magnetic susceptibility of liquid Cr-Au, Mn-Au, Fe-Au and Cu-Au alloys was investigated as a function of temperature and composition. Liquid Cr{sub 1-c}Au{sub c} with 0.5 ≤ c and Mn{sub 1-c}Au{sub c} with 0.3≤c obeyed the Curie-Weiss law with regard to their dependence of χ on temperature. The magnetic susceptibilities of liquid Fe-Au alloys also exhibited Curie-Weiss behavior with a reasonable value for the effective number of Bohr magneton. On the Au-rich side, the composition dependence of χ for liquid TM-Au (TM=Cr, Mn, Fe) alloys increased rapidly with increasing TM content, respectively. Additionally, the composition dependences of χ for liquid Cr-Au, Mn-Au, and Fe-Au alloys had maxima at compositions of 50 at% Cr, 70 at% Mn, and 85 at% Fe, respectively. We compared the composition dependences of χ{sub 3d} due to 3d electrons for liquid binary TM-M (M=Au, Al, Si, Sb), and investigated the relationship between χ{sub 3d} and E{sub F} in liquid binary TM-M alloys at a composition of 50 at% TM.

  3. Comportement au dégel des sols silteux Thaw Behavior in Silty Soils

    Directory of Open Access Journals (Sweden)

    Montarges R.

    2006-11-01

    Full Text Available Les problèmes géotechniques relatifs à l'offshore arctique concernent essentiellement le tassement et la dégradation mécanique des sols au dégel. Dans la perspective d'évaluation de l'importance de ces problèmes l'IFP, avec le concours du Laboratoire de Glaciologie et Géophysique de l'environnement, a entrepris en 1986-87, une étude méthodologique des sols au dégel. Deux sols silteux (un silt sableux et un silt argileux, de comportement au gel très différent, ont été utilisés pour cette étude préliminaire. L'interprétation des résultats obtenus, dans les domaines de la structure des sols gelés et de l'évolution de leurs caractéristiques mécaniques (tassement et résistance au cisaillement, montre l'influence prédominante de la présence des minéraux argileux. Les résultats de cette étude préliminaire sont brièvement examinés en terme d'application aux problèmes d'exploitation pétrolière en zones arctiques. La poursuite de l'expérimentation apparaît nécessaire notamment pour évaluer correctement l'incidence du comportement au dégel des sols sur la subsidence associée aux risques d'instabilité des conduites rigides ou flexibles. Geotechnical problems related to offshore arctic activities mainly concern the settling and mechanical degradation of soils as the result of thawing. In the outlook for assessing the importance of such problems, IFP, with the assistance of the Laboratoire de Glaciologie et Géophysique de l'Environnement, began methodological research in 1986-1987 on the effect of thawing on soils. Two silty soils (one sandy silt and one clayey silt having very different thaw behaviors were used for this preliminary study. The interpretation of the results obtained in the fields of frozen soil structure and the evolution of their mechanical properties (settling and shear strength shows the predominant influence of the presence of clayey minerals. The results of this preliminary study are examined

  4. Influence du cisaillement macroscopique sur la propagation d'une fissure située à l'interface d'un revêtement céramique et d'un substrat métallique

    OpenAIRE

    Sapardanis, Hélène; Maurel, Vincent; Köster, Alain; Borit, François; Duvinage, Steve; Guipont, Vincent

    2015-01-01

    International audience; Les dépôts des revêtements projetés sont le plus souvent réalisés à chaud (jet plasma, faisceau d'électron...) ou avec des échauffements locaux importants au cours du dépôt (cold spray). Lors de l'utilisation des pièces, la température étant généralement différente de la température de dépôt, l'écart de coefficients de dilatation thermique entre les couches du système conduit à un état de ...

  5. Les technolectes au Maroc

    OpenAIRE

    Messaoudi, Leila

    2017-01-01

    Cette réflexion sur les technolectes au Maroc émane d’un ensemble de travaux menés sur le terrain et conduit à une synthèse permettant de dégager le fonctionnement général et les tendances d’évolution. Nous commencerons par rappeler les traits définitoires du technolecte. Nous aborderons ensuite se : modes de réalisation, en illustrant par des échantillons de corpus recueillis au Maroc. Définition de « technolecte » Par « technolecte », nous entendons l’ensemble des usages lexicaux et discurs...

  6. Le CRDI au Cambodge

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le CRDI a été l'un des premiers bailleurs de fonds à établir des relations avec le Cambodge au début des années 1990, alors que le pays progres- sait vers la paix. Depuis, le Centre aide à reconstruire le Cambodge, qui se remet du régime inhumain des Khmers rouges et de décennies de conflits régionaux. Un État ...

  7. Le CRDI au Vietnam

    International Development Research Centre (IDRC) Digital Library (Canada)

    des agriculteurs trouvent des solutions de rechange à la culture du tabac. □ des responsables de politiques agissent pour réduire la pauvreté. Soutien accordé par le CRDI depuis 1991. 111 activités d'une valeur de 30 millions cad. CRDI. Le CRDI au Vietnam centre de recherches pour le développement international ...

  8. Mise au point

    African Journals Online (AJOL)

    7 mai 2012 ... cervico-thoracique confirme l'existence d'un goitre plon- geant aux dépens du lobe droit restant à 15 mm de la crosse aortique associé à un processus expansif tissulai- ... DU CANCER DIFFERENCIE DE LA ThYROIDE. R. BEN M'hAMED et al. Journal ORL N°26 .ai:Mise au point 07/05/12 09:45 page54 ...

  9. Le CRDI au Ghana

    International Development Research Centre (IDRC) Digital Library (Canada)

    pour prévenir le paludisme, des études ayant démontré que leur utilisation pouvait réduire considérablement la mortalité infantile. Les chercheurs ont également suggéré aux gouvernements différents moyens pour inciter les gens à acheter les moustiquaires et à les utiliser correctement. Les TI au service de la démocratie.

  10. Mise au point

    African Journals Online (AJOL)

    31 mai 2013 ... volumineuse tuméfaction sus claviculaire. Cette masse intéressant toute la partie latérale droite du cou et le quart supérieur du thorax était indolore, mobile par rapport au plan profond et rénitente mesurant 22 cm sur 26 cm de diamètre. On notait la présence de lacis veineux. ailleurs, les poumons étaient ...

  11. Le CRDI au Maroc

    International Development Research Centre (IDRC) Digital Library (Canada)

    démocratiques. Au Maroc, le Centre d'études et de recherches en sciences sociales analyse ce que pourrait être la réaction du gouverne- ment aux pressions exercées par la population en vue d'un changement sur le plan politique. Rabat. Casablanca. Marrakech. Tan-Tan. Bou Arfa. Zagora. Oujda. Tanger. Fès. ALGÉRIE.

  12. Mise au point

    African Journals Online (AJOL)

    et traité à temps, le risque de complications et de morbidité peut être écarté. Les auteurs rapportent 2 cas de kystes de la vallécule. La tomodensitométrie a confirmé la présence d'une formation kystique prenant origine au niveau de la val- lécule. Une laryngoscopie directe a été faite pour les 2 patients sous anesthésie ...

  13. Fabrication of Au-Pd Core-shell Nanoparticles using Au Thin-Film Dewetting at High Temperature and Chemical Synthesis Methods

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Min-Gyu; Lee, Hye-Jung; Oh, Yong-Jun [Hanbat National Univ., Daejeon (Korea, Republic of)

    2016-07-15

    Au-Pd bimetallic nanoparticles (NPs) have received a lot of attention in the fields of catalysts and hydrogen sensors. In this study, Au-Pd core-shell NP arrays were successfully fabricated using two steps: formation of the ordered array of Au NPs cores via solid-state dewetting of a Au thin film on a topographic silica substrate, and Pd shell formation via chemical synthesis using two different surfactants (CTAB and CTAC). Using the CTAB surfactant in particular, a 2-D composite structure comprised of an ordered array of Au-Pd NPs, with smaller Pd NPs on the nanoscopic gaps between the Au-Pd NPs, could be formed. This structure is expected to have potential application in resistance-base hydrogen sensors.

  14. Mise au point

    African Journals Online (AJOL)

    tomie est replacé et fixé par des fils d'acier, krönlein lais- sait ce fragment pédiculé au fascia temporalis afin d'évi- ter la dépression de la fosse temporale due à la désinser- tion du muscle temporal [20] ; dans notre série, après reconstitution du cadre, le muscle temporal est suturé à son point d'insertion. pour les tumeurs ...

  15. Migration malienne au Cameroun

    OpenAIRE

    Cisse, Pierre

    2013-01-01

    L’attractivité économique du Cameroun à partir des années quatre-vingt a drainé une population d’émigrés maliens. S’appuyant sur un système efficace de réseaux de parenté, la communauté malienne du Cameroun assure sa propre pérennité. En offrant systématiquement un emploi au membre nouvellement venu, elle s’annexe des pans entiers de l’économie camerounaise. Ce faisant, à Yaoundé ou à Douala, elle se met aussi à dos une population autochtone concurrente.

  16. Mise au point

    African Journals Online (AJOL)

    31 mai 2013 ... L'attitude théra- peutique dépend du type de la laryngocèle. en effet, le traitement endoscopique au laser CO2 a gagné beaucoup d'intérêt ces dernières années. MATÉRIEL ET MÉTHOdES. Il s'agit d'une étude rétrospective portant sur 9 patients porteurs d'une laryngocèle colligés sur une période de 14.

  17. Le paludisme au Mexique

    International Development Research Centre (IDRC) Digital Library (Canada)

    Nancy Minogue

    Le paludisme est depuis longtemps un important problème de santé publique au Mexique, où les conditions qui prévalent ... C'est dans les régions côtières que le problème a persisté le plus longtemps, les mesures ... recherche sur l'écologie des moustiques a permis d'en découvrir les raisons. « Les moustiques ne se ...

  18. Quantum interference effects in nanostructured Au

    CERN Document Server

    Pratumpong, P; Evans, S D; Johnson, S; Howson, M A

    2002-01-01

    We present results on the magnetoresistance and temperature dependence of the resistivity for nanostructured Au produced by chemical means. The magnetoresistance was typical of highly disordered metals exhibiting quantum interference effects. We fitted the data and were able to determine the spin-orbit scattering relaxation time to be 10 sup - sup 1 sup 2 s and we found the inelastic scattering time at 10 K to be 10 sup - sup 1 sup 1 s. The inelastic scattering rate varied as T sup 3 between 4 and 20 K, which is typical for electron-phonon scattering in disordered metals.

  19. Effects of TiO2 sol on the microstructure and properties of Au-Co coatings

    Science.gov (United States)

    Tay, See Leng; van Vliet, Jowin; Wang, Yuxin; Hou, Fengyan; Xiong, Chao; Gao, Wei

    2017-07-01

    Gold (Au) coatings are widely used for electrical contacts in devices, decoration and jewelry. However, the relatively low hardness and poor wear resistance of pure Au coatings lead to a short service life and limit their application. Ni is frequently used as an alloying element to enhance the hardness but it lowers the conductivity of Au coatings. In this research, Co was co-deposited as an alloying element with Au to improve its mechanical properties while maintaining conductivity. TiO2 sol in different concentrations was added to the Au-Co plating bath to further enhance the coating strength. Systematic studies including surface morphology, hardness, wear resistance and electrical conductivity have been carried out. Key results from nanoindentation tests demonstrated that the hardness of Au-Co-TiO2 composite coating was increased by 30% when compared to a pure Au-Co coating, while the electrical conductivity has been kept at the same level.

  20. Charged particle density distributions in Au+ Au collisions at ...

    Indian Academy of Sciences (India)

    Charged particle pseudorapidity distributions have been measured in Au + Au collisions using the BRAHMS detector at RHIC. The results are presented as a function of the collision centrality and the center of mass energy. They are compared to the predictions of different parton scattering models and the important role of ...

  1. Charged particle density distributions in Au + Au collisions at ...

    Indian Academy of Sciences (India)

    Charged particle pseudorapidity distributions have been measured in Au + Au collisions using the BRAHMS detector at RHIC. The results are presented as a function of the collision centrality and the center of mass energy. They are compared to the predictions of different parton scattering models and the important role of ...

  2. (Au/PANA/PVAc) nanofibers as a novel composite matrix for albumin and streptavidin immobilization

    Energy Technology Data Exchange (ETDEWEB)

    Golshaei, Rana [University of Kashan, Institute of Nano Science and Nano Technology, Kashan, P.O. Box 87317-51167, Islamic Republic of Iran (Iran, Islamic Republic of); Guler, Zeliha [Istanbul Technical University, Nanoscience and Nanoengineering, Maslak, Istanbul 34469 (Turkey); Sarac, Sezai A., E-mail: sarac@itu.edu.tr [Istanbul Technical University, Nanoscience and Nanoengineering, Maslak, Istanbul 34469 (Turkey); Istanbul Technical University, Department of Chemistry and Polymer Science and Technology, Maslak, Istanbul 34469 (Turkey)

    2016-03-01

    A novel electrospun nanofiber mat (Au/PANA/PVAc) consists of (Gold/Poly Anthranilic acid) (Au/PANA) core/shell nanostructures as a support material for protein immobilization that was developed and characterized by electrochemical impedance spectroscopy. In the core/shells, PANA served carboxyl groups (− COOH) for covalent protein immobilization and Au enhanced the electrochemical properties by acting as tiny conduction centers to facilitate electron transfer. Covalent immobilization of albumin and streptavidin as model proteins onto the (Au/PANA/PVAc) nanofibers was carried out by using 1-ethyl-3-(dimethyl-aminopropyl) carbodiimide hydrochloride (EDC)/N-hydroxyl succinimide (NHS) activation. PVAc nanofibers were compared with Au/PANA/PVAc nanofibers before and after protein immobilization. The successful covalent binding of both albumin and streptavidin onto (Au/PANA/PVAc) nanofibers was confirmed by FTIR-ATR, Electron Microscopy/Energy-Dispersive X-ray Spectroscopy SEM/EDX and Electrochemical impedance spectroscopy (EIS). The nanofibers became resistive due to protein immobilization and the higher charge transfer resistance was observed after higher amount of protein was immobilized. - Highlights: • Au/PANA/PVAc nanofibers with (COOH) groups as a suitable supports for covalent immobilization of proteins. • Increasing of the resistivity of the nanofibers after immobilization of the proteins. • Activation of Au/PANA/PVAc nanofibers by using EDC/NHS.

  3. Transverse expansion in 197 Au + 197 Au collisions at RHIC

    International Nuclear Information System (INIS)

    Cheng, Y.; Liu, F.; Liu, K.; Schweda, K.; Xu, N.

    2003-01-01

    Using the RQMD model, transverse momentum distributions and particle ratios are studied for 197 Au + 197 Au collisions at √s NN = 200 GeV. In particular, they present results on the mean transverse momentum of charged pions, charged kaons, protons and anti-protons and compare with experimental measurements. They discuss an approach to study early partonic collectivity in high energy nuclear collisions

  4. Centrality dependence of antiproton production in Au+Au collisions

    Energy Technology Data Exchange (ETDEWEB)

    Beavis, D.; Bennett, M.J.; Carroll, J.B.; Chiba, J.; Chikanian, A.; Crawford, H.; Cronqvist, M.; Dardenne, Y.; Debbe, R.; Doke, T.; Engelage, J.; Greiner, L.; Hallman, T.J.; Hayano, R.S.; Heckman, H.H.; Kashiwagi, T.; Kikuchi, J.; Kumar, S.; Kuo, C.; Lindstrom, P.J.; Mitchell, J.W.; Nagamiya, S.; Nagle, J.L.; Pope, J.K.; Stankus, P.; Tanaka, K.H.; Welsh, R.C.; Zhan, W. [Brookhaven National Laboratory, Upton, New York (United States)]|[A.W. Wright Nuclear Structure Laboratory, Yale University, New Haven, Connecticut (United States)]|[University of California at Los Angeles, Los Angeles California (United States)]|[National Laboratory for High Energy Physics (KEK), Tsukuba (Japan)]|[University of California Space Sciences Laboratory, Berkeley California (United States)]|[Waseda University, Tokyo (Japan)]|[University of Tokyo, Tokyo (Japan)]|[Lawrence Berkeley Laboratory, Berkeley California (United States)]|[Universities Space Sciences Research Association/Goddard Space Flight Center, Greenbelt, Maryland (United States)]|[Nevis Laboratory, Columbia University, Irvington, New York (United States)]|[Johns Hopkins University, Baltimore, Maryland (United States); (E878 Collaboration)

    1995-11-13

    We have measured the yields of antiprotons in Au+Au interactions in the rapidity range 1.2{lt}{ital y}{lt}2.8 as a function of centrality using a beam line spectrometer. The shapes of the invariant multiplicity distributions at {ital p}{sub {ital t}}=0 are used to explore the dynamics of antiproton production and annihilation. {copyright} {ital 1995} {ital The} {ital American} {ital Physical} {ital Society}.

  5. Face au risque

    CERN Document Server

    Grosse, Christian; November, Valérie

    2007-01-01

    Ce volume collectif sur le risque inaugure la collection L'ÉQUINOXE. Ancré dans l'histoire pour mesurer les continuités et les ruptures, il illustre la manière dont les sciences humaines évaluent et mesurent les enjeux collectifs du risque sur les plans politiques, scientifiques, énergétiques, juridiques et éthiques. Puisse-t-il nourrir la réflexion sur la culture et la prévention du risque. Ses formes épidémiques, écologiques, sociales, terroristes et militaires nourrissent les peurs actuelles, structurent les projets sécuritaires et constituent - sans doute - les défis majeurs à notre modernité. Dans la foulée de la richesse scientifique d'Equinoxe, L'ÉQUINOXE hérite de son esprit en prenant à son tour le pari de contribuer - non sans risque - à enrichir en Suisse romande et ailleurs le champ éditorial des sciences humaines dont notre société a besoin pour forger ses repères. Après Face au risque suivra cet automne Du sens des Lumières. (MICHEL PORRET Professeur Ordinaire à la F...

  6. Whole Genome Sequencing Investigation of a Tuberculosis Outbreak in Port-au-Prince, Haiti Caused by a Strain with a "Low-Level" rpoB Mutation L511P - Insights into a Mechanism of Resistance Escalation.

    Directory of Open Access Journals (Sweden)

    Oksana Ocheretina

    Full Text Available The World Health Organization recommends diagnosing Multidrug-Resistant Tuberculosis (MDR-TB in high burden countries by detection of mutations in Rifampin (RIF Resistance Determining Region of Mycobacterium tuberculosis rpoB gene with rapid molecular tests GeneXpert MTB/RIF and Hain MTBDRplus. Such mutations are found in >95% of Mycobacterium tuberculosis strains resistant to RIF by conventional culture-based drug susceptibility testing (DST. However routine diagnostic screening with molecular tests uncovered specific "low level" rpoB mutations conferring resistance to RIF below the critical concentration of 1 μg/ml in some phenotypically susceptible strains. Cases with discrepant phenotypic (susceptible and genotypic (resistant results for resistance to RIF account for at least 10% of resistant diagnoses by molecular tests and urgently require new guidelines to inform therapeutic decision making. Eight strains with a "low level" rpoB mutation L511P were isolated by GHESKIO laboratory between 2008 and 2012 from 6 HIV-negative and 2 HIV-positive patients during routine molecular testing. Five isolates with a single L511P mutation and two isolates with double mutation L511P&M515T had MICs for RIF between 0.125 and 0.5 μg/ml and tested susceptible in culture-based DST. The eighth isolate carried a double mutation L511P&D516C and was phenotypically resistant to RIF. All eight strains shared the same spoligotype SIT 53 commonly found in Haiti but classic epidemiological investigation failed to uncover direct contacts between the patients. Whole Genome Sequencing (WGS revealed that L511P cluster isolates resulted from a clonal expansion of an ancestral strain resistant to Isoniazid and to a very low level of RIF. Under the selective pressure of RIF-based therapy the strain acquired mutation in the M306 codon of embB followed by secondary mutations in rpoB and escalation of resistance level. This scenario highlights the importance of subcritical

  7. Patterned microstructures formed with MeV Au implantation in Si(1 0 0)

    International Nuclear Information System (INIS)

    Rout, Bibhudutta; Greco, Richard R.; Zachry, Daniel P.; Dymnikov, Alexander D.; Glass, Gary A.

    2006-01-01

    Energetic (MeV) Au implantation in Si(1 0 0) (n-type) through masked micropatterns has been used to create layers resistant to KOH wet etching. Microscale patterns were produced in PMMA and SU(8) resist coatings on the silicon substrates using P-beam writing and developed. The silicon substrates were subsequently exposed using 1.5 MeV Au 3+ ions with fluences as high as 1 x 10 16 ions/cm 2 and additional patterns were exposed using copper scanning electron microscope calibration grids as masks on the silicon substrates. When wet etched with KOH microstructures were created in the silicon due to the resistance to KOH etching cause by the Au implantation. The process of combining the fabrication of masked patterns with P-beam writing with broad beam Au implantation through the masks can be a promising, cost-effective process for nanostructure engineering with Si

  8. Extraction of Source Images in Au+Au and d+Au collisions at RHIC

    International Nuclear Information System (INIS)

    Chung, P.; Taranenko, A.; Lacey, R.; Holzmann, W.; Alexander, J.; Issah, M.

    2005-01-01

    The PHENIX Collaboration has performed a systematic study of two-pion correlations in Au+Au and d+Au collisions at RHIC (s=200AGeV). The correlations have been analyzed using the Imaging technique of Brown and Danielewicz to extract the two-pion source functions as a function of mT and centrality. The source images are characterised by a short-range Gaussian-like core and a long-range exponential-like tail with a characteristic radius about 3 times that of the Gaussian core. The mT and centrality dependence of the source parameters indicate that the two structures are intricately related

  9. Le CRDI au Sri Lanka

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le CRDI appuie la recherche au Sri. Lanka depuis 1973. Il s'est d'abord concentré sur l'amélioration des pratiques agricoles. Par exemple, grâce à la mise au point d'un système de rizi - culture permettant d'exploiter les pluies de mousson, les riziculteurs ont triplé leurs rendements en quatre ans. Ils ont été nombreux à ...

  10. Comparative study of anchoring groups for molecular electronics: structure and conductance of Au-S-Au and Au-NH2-Au junctions

    DEFF Research Database (Denmark)

    Kristensen, Iben Sig; Mowbray, Duncan; Thygesen, Kristian Sommer

    2008-01-01

    of identifying and comparing the intrinsic properties of two commonly used anchoring groups, namely thiol and amine groups, we have calculated the atomic structure and conductance traces of different Au-S-Au and Au-NH2-Au nanojunctions using density functional theory (DFT). Whereas NH2 shows a strong structural...

  11. L’apprentissage au cern

    CERN Multimedia

    2007-01-01

    pour les professions d’électronicien(ne) et de laborantin(e) en physique L’apprentissage au CERN est régi par les lois, règlements et contrats en vigueur dans le canton de Genève. En cas de réussite à l’examen de fin d’apprentissage, les apprentis obtiennent le Certificat fédéral de capacité suisse (CFC). 6 places au total sont ouvertes au recrutement pour les deux professions. L’apprentissage dure 4 ans. Minima requis pour faire acte de candidature : avoir au moins 15 ans et moins de 21 ans à la date de début de l’apprentissage ; avoir terminé la scolarité obligatoire, au minimum 9e du Cycle d’orientation genevois (3e en France) ; être ressortissant d’un pays membre du CERN (Allemagne, Autriche, Belgique, Bulgarie, Danemark, Espagne, Finlande, France, Grèce, Hongrie, Italie, Norvège, Pays-Bas, Pologne, Portugal, Royaume-Uni, République tchèque, République slovaque , Suède, Suisse) ; pour les résidents en Suisse : être ressortissant su...

  12. Studies of Au/SAMs/PEDOT-PSS/Au tunnel junctions

    Science.gov (United States)

    Sun, Nan; Lieberman, Marya; Ruggiero, Steven

    2008-03-01

    We report on tunneling through thin organic films. Junctions of the form: Au/SAMs/Polymer/Au were prepared on electronic-grade Si substrates with Self-Assembled Monolayers (SAMs) including octanedithiol (HS-C8H16-SH) and mercaptohexadecanoic (HS-C15H30-COOH). A transitional conducting polymer film PEDOT-PSS was spun on to the SAMs layer, and junctions were completed with a gold film. X-ray photoelectron spectroscopy (XPS) was employed to monitor the quality of the SAMs films. The electron tunneling properties including dI/dV and d^2I/dV^2 versus bias for the SAMs are discussed.

  13. Mechanism of H2O-Induced Conductance Changes in AuCl4-Functionalized CNTs

    KAUST Repository

    Murat, Altynbek

    2015-04-30

    We employ ab initio self-interaction corrected density functional theory combined with the nonequilibrium Green\\'s function method to study the electronic and quantum transport properties of carbon nanotubes (CNTs) functionalized with AuCl4 molecules. In particular, we investigate the electronic structure and characterize the conductance for different concentrations and configurations of randomly distributed AuCl4 molecules with and without the adsorption of H2O. We thus propose a mechanism that explains the origin of the recently observed resistivity changes of AuCl4-functionalized CNTs upon H2O adsorption. We find that water adsorption shifts the highest occupied Cl and Au states down in energy and thereby reduces the scattering of the electrons around the Fermi energy, hence enhancing the conductivity. Our results help in the development of highly sensitive nanoscale H2O vapor sensors based on AuCl4-functionalized CNTs. © 2015 American Chemical Society.

  14. Chiral magnetic effect search in p+Au, d+Au and Au+Au collisions at RHIC

    Science.gov (United States)

    Zhao, Jie

    2018-01-01

    Metastable domains of fluctuating topological charges can change the chirality of quarks and induce local parity violation in quantum chromodynamics. This can lead to observable charge separation along the direction of the strong magnetic field produced by spectator protons in relativistic heavy-ion collisions, a phenomenon called the chiral magnetic effect (CME). A major background source for CME measurements using the charge-dependent azimuthal correlator (Δϒ) is the intrinsic particle correlations (such as resonance decays) coupled with the azimuthal elliptical anisotropy (v2). In heavy-ion collisions, the magnetic field direction and event plane angle are correlated, thus the CME and the v2-induced background are entangled. In this report, we present two studies from STAR to shed further lights on the background issue. (1) The Δϒ should be all background in small system p+Au and d+Au collisions, because the event plane angles are dominated by geometry fluctuations uncorrelated to the magnetic field direction. However, significant Δϒ is observed, comparable to the peripheral Au+Au data, suggesting a background dominance in the latter, and likely also in the mid-central Au+Au collisions where the multiplicity and v2 scaled correlator is similar. (2) A new approach is devised to study Δϒ as a function of the particle pair invariant mass (minv) to identify the resonance backgrounds and hence to extract the possible CME signal. Signal is consistent with zero within uncertainties at high minv. Signal at low minv, extracted from a two-component model assuming smooth mass dependence, is consistent with zero within uncertainties.

  15. Author Details

    African Journals Online (AJOL)

    Etude des paramètres de compressibilité et de cisaillement de l'argile-sableuse de la région de Douala au Cameroun Details PDF · Vol 3, No 2 (2003) - Articles Effet du remaniement par décompression de L'échantillon sur la résistance au cisaillement de l'argile-sableuse jaunatre de Ndogbong dans la région de Douala ...

  16. Hadron production in Au-Au collisions at RHIC

    International Nuclear Information System (INIS)

    Braun-Munzinger, P.; Magestro, D.; Redlich, K.; Wroclaw Univ.; Stachel, J.

    2001-05-01

    We present an analysis of particle production yields measured in central Au-Au collisions at RHIC in the framework of the statistical thermal model. We demonstrate that the model extrapolated from previous analyses at SPS and AGS energy is in good agreement with the available experimental data at √(s) = 130 GeV implying a high degree of chemical equilibration. Performing a χ 2 fit to the data, the range of thermal parameters at chemical freezeout is determined. At present, the best agreement of the model and the data is obtained with the baryon chemical potential μ B ≅ 51 ± 6 MeV and temperature T ≅ 175 ± 7 MeV. More ratios, such as multistrange baryon to meson, would be required to further constrain the chemical freezeout conditions. Extrapolating thermal parameters to higher energy, the predictions of the model for particle production in Au-Au reactions at √(s) = 200 GeV are also given. (orig.)

  17. Level lifetimes of Au52+ in Au plasma

    International Nuclear Information System (INIS)

    Liu Bo; Zhu Zhiyan; Jiang Gang; Zhu Zhenghe

    2003-01-01

    Based on the extended relativistic multiconfiguration Dirac-Fock theory, the level lifetimes, level widths and wavelengths of Au 52+ have been calculated using the General-purpose Relativistic Atomic Structure Program. The wavelengths obtained are in good agreement with the experimental data available. The relationship between the level lifetimes and the level widths satisfies the Heisenberg uncertainty principle

  18. Study on the failure temperature of Ti/Pt/Au and Pt5Si2-Ti/Pt/Au metallization systems

    Science.gov (United States)

    Zhang, Jie; Han, Jianqiang; Yin, Yijun; Dong, Lizhen; Niu, Wenju

    2017-09-01

    The Ti/Pt/Au metallization system has an advantage of resisting KOH or TMAH solution etching. To form a good ohmic contact, the Ti/Pt/Au metallization system must be alloyed at 400 °C. However, the process temperatures of typical MEMS packaging technologies, such as anodic bonding, glass solder bonding and eutectic bonding, generally exceed 400 °C. It is puzzling if the Ti/Pt/Au system is destroyed during the subsequent packaging process. In the present work, the resistance of doped polysilicon resistors contacted by the Ti/Pt/Au metallization system that have undergone different temperatures and time are measured. The experimental results show that the ohmic contacts will be destroyed if heated to 500 °C. But if a 20 nm Pt film is sputtered on heavily doped polysilicon and alloyed at 700 °C before sputtering Ti/Pt/Au films, the Pt5Si2-Ti/Pt/Au metallization system has a higher service temperature of 500 °C, which exceeds process temperatures of most typical MEMS packaging technologies. Project supported by the National Natural Science Foundation of China (No. 61376114).

  19. Thermoelectric properties of currently available Au/Pt thermocouples related to the valid reference function

    Directory of Open Access Journals (Sweden)

    Edler F.

    2015-01-01

    Full Text Available Au/Pt thermocouples are considered to be an alternative to High Temperature Standard Platinum Resistance Thermometers (HTSPRTs for realizing temperatures according to the International Temperature Scale of 1990 (ITS-90 in the temperature range between aluminium (660.323 °C and silver (961.78 °C. The original aim of this work was to develop and to validate a new reference function for Au/Pt thermocouples which reflects the properties of presently commercially available Au and Pt wires. The thermoelectric properties of 16 Au/Pt thermocouples constructed at different National Metrological Institutes by using wires from different suppliers and 4 commercially available Au/Pt thermocouples were investigated. Most of them exhibit significant deviations from the current reference function of Au/Pt thermocouples caused by the poor performance of the Au-wires available. Thermoelectric homogeneity was investigated by measuring immersion profiles during freezes at the freezing point of silver and in liquid baths. The thermoelectric inhomogeneities were found to be one order of magnitude larger than those of Au/Pt thermocouples of the Standard Reference Material® (SRM® 1749. The improvement of the annealing procedure of the gold wires is a key process to achieve thermoelectric homogeneities in the order of only about (2–3 mK, sufficient to replace the impracticable HTSPRTs as interpolation instruments of the ITS-90. Comparison measurements of some of the Au/Pt thermocouples against a HTSPRT and an absolutely calibrated radiation thermometer were performed and exhibit agreements within the expanded measurement uncertainties. It has been found that the current reference function of Au/Pt thermocouples reflects adequately the thermoelectric properties of currently available Au/Pt thermocouples.

  20. Enhanced electrocatalytic performance for isopropanol oxidation on Pd-Au nanoparticles dispersed on poly(p-phenylene) prepared from biphenyl

    International Nuclear Information System (INIS)

    Zhou Weiqiang; Wang Chuanyi; Xu Jingkun; Du Yukou; Yang Ping

    2010-01-01

    Poly(p-phenylene) (PPP) films with good electrochemical activity and good thermal stability were synthesized by a low-potential electrochemical polymerization of biphenyl in pure boron trifluoride diethyl etherate. As-formed PPP film was firstly used as a catalyst support. Pd-Au nanoparticles were successfully electro-deposited on PPP films (namely, Pd-Au/PPP) and used for the electrooxidation of isopropanol in alkaline media. The Pd-Au/PPP composite catalyst shows a high electrochemical active surface area in the hydrogen adsorption potential region. The results for isopropanol oxidation indicate that Pd-Au/PPP have higher catalytic activity and stronger poisoning-resistance than the Pd-Au deposited on the bare electrode. Furthermore, the role of PPP in the composite catalyst and supplemental effect are discussed. The present study evidences that Pd-Au/PPP is a promising choice as a composite catalyst for isopropanol electrooxidation in alkaline medium.

  1. Stretchable Characteristics of Thin Au Film on Polydimethylsiloxane Substrate with Parylene Intermediate Layer for Stretchable Electronic Packaging

    Science.gov (United States)

    Park, Donghyun; Shin, Soo Jin; Oh, Tae Sung

    2018-01-01

    Thin Au films with thickness of 150 nm could be reversibly stretched up to 30% elongation on polydimethylsiloxane (PDMS) substrate with 150-nm-thick Parylene C deposited as intermediate layer instead of a Cr adhesion layer. Prestretching of the Parylene-deposited PDMS was effective to suppress the resistance increase of Au films during their tensile elongation. While the resistance change rate Δ R/ R 0 of the Au film at 30% elongation was 11 without prestretching of the Parylene-deposited PDMS, it was substantially suppressed to 0.4 with 30% prestretching of the Parylene-deposited PDMS.

  2. Filipino au pairs on the move

    DEFF Research Database (Denmark)

    Dalgas, Karina Märcher

    2016-01-01

    Most Filipina au pairs in Denmark send remittances back home, and for many, au pairing forms part of longer-term migration trajectories. This article explores how Filipina au pairs try to carve out a future for themselves abroad. It shows that they navigate within tight webs of financial interdep...

  3. [Studies on Au-Ag-Pd-Cu alloys. (Part 2) Some properties on alloys containing 30 wt% Au (author's transl)].

    Science.gov (United States)

    Okazaki, K

    1980-04-01

    In the previous paper, the author reported 30 wt% Au was more favourable content in Au-Ag-Pd-Cu quaternary dental alloys. In this paper, the experiment was carried out to find suitable Pd and Cu content in 30 wt% Au-Ag-Pd-Cu alloy. Pd and Cu content was changed from 5 wt% to 25 wt% and from 10 wt% to 20 wt% respectively. Ag content was balanced, and no other metals was added. Range of solidification temperature, tensile strength, elongation, hardness, corrosion resistivity and castability were tested. Results were as follows. 1) In these alloys, liquidus points were in the range of 880 degree C approximately 140 degree C, but in the majority of alloys, liquidus points were under 1100 degree C. Range of solidification temperature was more narrow in 20 wt% Cu than other Cu content. 2) The tensile strength and elongation of swaged specimens increased as Pd content increased, but in case of cast specimens, mechanical properties were the highest at 15 approximately 20 wt% Pd. The Vicker's hardness was in the range of 116 to 235. 3) The corrosion test in 0.1% Na2S solution indicated that the corrosion resistance was increased with Pd content and alloys contained more than 20 wt% Pd showed good resistance to corrosion. 4) The castability was affected by the Pd content and much decreased between 15 wt% Pd and 20 wt% Pd, but the castability of these alloys is twice as good as the alloys on the market. From these results, it seemed that the alloys containing 15 approximately 20 wt% Pd and 15 approximately 25 wt% Cu were more favourable composition to 30 wt% Au-Ag-Pd-Cu alloys.

  4. Structural design of flexible Au electrode to enable shape memory polymer for electrical actuation

    Science.gov (United States)

    Lu, Haibao; Lei, Ming; Zhao, Chao; Xu, Ben; Leng, Jinsong; Fu, Y. Q.

    2015-04-01

    An effective resistive Joule heating approach was conducted to improve the electrical actuation and shape-recovery performance of a shape memory polymer (SMP) nanocomposite. Two types of gold (Au) film patterns were deposited to be used as electrodes to drive thermal-responsive SMPs and achieve a uniform temperature distribution during electro-activated shape recovery. Furthermore, the sensing capability of the Au electrode to both mechanical and thermal stimuli applied to the SMP nanocomposite was experimentally investigated and theoretically analyzed. It was found that the change in the electrical resistance of the Au electrode could be used as an indication of shape-recovery performance. The linear response of the electrical resistance to strain was identified mainly due to the opening/closing of microcracks and their propagations in the Au electrodes during out-of-plane deformations. With an increment of thermomechanical bending cycles, the electrical resistance was increased exponentially, but it returned back to the original reading when the SMP nanocomposite returned back to its permanent shape. Finally, the flexible Au electrode enabled the actuation of the SMP nanocomposite under an electric voltage of 13.4 V, with an improved shape-recovery performance and temperature distribution.

  5. d + Au hadron correlation measurements at PHENIX

    Energy Technology Data Exchange (ETDEWEB)

    Sickles, Anne M., E-mail: anne@bnl.gov

    2014-06-15

    In these proceedings, we discuss recent results from d + Au collisions in PHENIX ridge related measurements and their possible hydrodynamic origin. We present the v{sub 2} at midrapidity and measurements of the pseudorapidity dependence of the ridge, distinguishing between the d-going and Au-going directions. We investigate the possible geometrical origin by comparing v{sub 2} in d + Au to that in p + Pb, Au + Au and Pb + Pb collisions. Future plans to clarify the role of geometry in small collision systems at RHIC are discussed.

  6. Decay spectroscopy of $^{178}$Au

    CERN Document Server

    Whitmore, B

    In this thesis, the neutron-deficient nucleus $^{178}$Au is investigated through decay spectroscopy. Si and HPGe detectors were used to analyse the decay radiation of $^{178}$Au and its daughter nuclei. Previous studies have been unable to distinguish decay radiation from different isomeric states of this nucleus. This thesis represents the first time such isomeric discrimination has been achieved, and presents tentative spin assignments of both the ground state and an isomer. The neutron-deficient gold isotopes are an area of interest for the study of shape coexistence. This is the phenomenon exhibited by nuclei able to exist at a number of close lying energy minima, each reflecting a distinct type of deformation. It is hoped that studies such as this can help identify the evolution of nuclear deformation in this region of the nuclear chart.

  7. L’apprentissage au CERN

    CERN Document Server

    Staff Association

    2016-01-01

    En 1961, sur la base du constat que l’évolution du marché du travail nécessitait un besoin croissant de personnel qualifié, le 1er accord entre la République et canton de Genève et le CERN fut signé. Cet accord avait notamment pour objet la formation professionnelle de jeunes électroniciens et techniciens de laboratoires en physique. Le CERN, acteur local économique d’importance, soulignait par cet accord sa volonté de participer au développement économique et social local. Le 1er apprenti arriva au CERN en 1965. En 1971, le centre d’apprentissage fut créé ; il accueille aujourd’hui plus d’une vingtaine d’apprentis au total, à raison d’environ six nouveaux apprentis chaque année. Cet apprentissage est dédié aux jeunes âgés e...

  8. How Does Amino Acid Ligand Modulate Au Core Structure and Characteristics in Peptide Coated Au Nanocluster?

    Science.gov (United States)

    Li, Nan; Li, Xu; Zhao, Hongkang; Zhao, Lina

    2018-03-01

    The atomic structures and the corresponding physicochemical properties of peptide coated Au nanoclusters determine their distinctive biological targeting applications. To learn the modulation of amino acid ligand on the atomic structure and electronic characteristics of coated Au core is the fundamental knowledge for peptide coated Au nanocluster design and construction. Based on our recent coated Au nanocluster configuration study (Nanoscale, 2016, 8, 11454), we built the typically simplified Au13(Cys-Au-Cys) system to more clearly learn the basic modulation information of amino acid ligand on Au core by the density functional theory (DFT) calculations. There are two isomers as ligand adjacent bonding (Iso1) and diagonal bonding (Iso2) to Au13 cores. The geometry optimizations indicate the adjacent bonding Iso1 is more stable than Iso2. More important, the Au13 core of Iso1 distorts much more significantly than that of Iso2 by Cys-Au-Cys bonding through the root-mean-square deviation (RMSD) analysis, which modulate their electronic characteristics in different ways. In addition, the frontier molecular orbital results of Au13(Cys-Au-Cys) isomers confirm that the Au cores mainly determine the blue shifts of Au13(Cys-Au-Cys) systems versus the original Au13 core in their UV-visible absorption spectrum studies. The configuration of Au13 core performs deformation under Cys-Au-Cys ligand modulation to reach new stability with distinct atomic structure and electronic properties, which could be the theory basis for peptide coated AuNCs design and construction.

  9. Reaction mechanisms for the CO oxidation on Au/CeO(2) catalysts: activity of substitutional Au(3+)/Au(+) cations and deactivation of supported Au(+) adatoms.

    Science.gov (United States)

    Camellone, Matteo Farnesi; Fabris, Stefano

    2009-08-05

    Density functional theory calculations that account for the on-site Coulomb interaction via a Hubbard term (DFT+U) reveal the mechanisms for the oxidation of CO catalyzed by isolated Au atoms as well as small clusters in Au/CeO(2) catalysts. Ceria (111) surfaces containing positively charged Au ions, either as supported Au(+) adatoms or as substitutional Au(3+) ions, are shown to activate molecular CO and to catalyze its oxidation to CO(2). In the case of supported single Au(+) adatoms, the limiting rate for the CO oxidation is determined by the adsorbate spillover from the adatom to the oxide support. The reaction then proceeds with the CO oxidation via lattice oxygen and O vacancy formation. These vacancies are shown to readily attract the supported Au(+) adatoms and to turn them into negatively charged Au(delta-) adspecies that deactivate the catalyst, preventing further CO adsorption. Au(3+) ions dispersed into the ceria lattice as substitutional point defects can instead sustain a full catalytic cycle consisting of three individual steps maintaining their activity along the reaction process: Au cations in Au(x)Ce(1-x)O(2) systems promote multiple oxidations of CO without any activation energy via formation of surface O vacancies. Molecular oxygen adsorbs at these vacancies and forms O adspecies that then catalyze the oxidation of molecular CO, closing the catalytic cycle and recovering the stoichiometric Au(x)Ce(1-x)O(2) system. The interplay between the reversible Ce(4+)/Ce(3+) and Au(3+)/Au(+) reductions underpins the high catalytic activity of dispersed Au atoms into the ceria substrate. It is shown that the positive oxidation state of the substitutional Au ions is retained along the catalytic cycle, thus preventing the deactivation of Au(x)Ce(1-x)O(2) catalysts in operation conditions. Finally, although a single Au(+) adatom bound to an O vacancy is shown to deactivate during CO oxidation, the calculations predict that the reactivity of gold nanoparticles

  10. Ballistic Electron Emission Microscopy (BEEM) of Au/Pr{sub 2}O{sub 3}/Si structures; Ballistische Elektronen Emissions Mikroskopie (BEEM) an Au/Si und Au/Pr{sub 2}O{sub 3}/Si-Strukturen

    Energy Technology Data Exchange (ETDEWEB)

    Mauch, I.

    2007-05-15

    This thesis describes Ballistic Electron Emission Microscopy (BEEM) measurements of Au/Si(111) and Au/Pr{sub 2}O{sub 3}/Si(111) structures. This technique is based on Scanning Tunnelling Microscopy (STM). It measures the ballistic transport of hot electrons through parts of the sample and across an interface, which provides a potential barrier. One part of this work was to modify the BEEM apparatus and to implement a lock in method, which modulates the tunnel current with a small frequency. In this way it is possible to study samples with very low resistance (as low as 30 k{omega}), which widely enlarges the number of samples which are appropriate for BEEM measurement at room temperature. Both types of samples studied in this thesis had low resistance and were therefore studied using the lock in method. For the classical BEEM system Au/Si(111), we observed a pronounced dependence of the sample resistance of Au/Si(111)-7 x 7 on the preparation temperature. We developed a model for the resistance of thermal prepared Au/Si(111)-7 x 7 samples. The model identifies that the low resistance is due to the surface conductivity of the reconstructed silicon surface. If the surface is prepared at a lower temperature (but still high enough that the surface is cleaned and the silicon dioxide desorbed) rough areas remain on the surface, which reduce the surface conductivity. For BEEM measurements flat areas of the sample surface are selected. The low temperature prepared samples we were able to obtain BEEM spectra as well as images at room temperature using the lock in method. The sesquioxide of praseodymium (Pr{sub 2}O{sub 3}) is currently discussed as a possible candidate for a gate oxide in semiconductor devices, since it has some of the required material properties such as a high dielectric constant, low leakage current and epitaxial growth on Si(100). We have for the first time performed BEEM measurement of praseodymium oxide. Despite a low resistance of the structures we

  11. Fabricating a Homogeneously Alloyed AuAg Shell on Au Nanorods to Achieve Strong, Stable, and Tunable Surface Plasmon Resonances

    KAUST Repository

    Huang, Jianfeng

    2015-08-13

    Colloidal metal nanocrystals with strong, stable, and tunable localized surface plasmon resonances (SPRs) can be useful in a corrosive environment for many applications including field-enhanced spectroscopies, plasmon-mediated catalysis, etc. Here, a new synthetic strategy is reported that enables the epitaxial growth of a homogeneously alloyed AuAg shell on Au nanorod seeds, circumventing the phase segregation of Au and Ag encountered in conventional synthesis. The resulting core–shell structured bimetallic nanorods (AuNR@AuAg) have well-mixed Au and Ag atoms in their shell without discernible domains. This degree of mixing allows AuNR@AuAg to combine the high stability of Au with the superior plasmonic activity of Ag, thus outperforming seemingly similar nanostructures with monometallic shells (e.g., Ag-coated Au NRs (AuNR@Ag) and Au-coated Au NRs (AuNR@Au)). AuNR@AuAg is comparable to AuNR@Ag in plasmonic activity, but that it is markedly more stable toward oxidative treatment. Specifically, AuNR@AuAg and AuNR@Ag exhibit similarly strong signals in surface-enhanced Raman spectroscopy that are some 30-fold higher than that of AuNR@Au. When incubated with a H2O2 solution (0.5 m), the plasmonic activity of AuNR@Ag immediately and severely decayed, whereas AuNR@AuAg retained its activity intact. Moreover, the longitudinal SPR frequency of AuNR@AuAg can be tuned throughout the red wavelengths (≈620–690 nm) by controlling the thickness of the AuAg alloy shell. The synthetic strategy is versatile to fabricate AuAg alloyed shells on different shaped Au, with prospects for new possibilities in the synthesis and application of plasmonic nanocrystals.

  12. Transport characteristics in Au/pentacene/Au diodes

    Science.gov (United States)

    Hayashi, Toshiaki; Naka, Akiyoshi; Hiroki, Masanobu; Yokota, Tomoyuki; Someya, Takao; Fujiwara, Akira

    2018-03-01

    We have used scanning and transmission electron microscopes (SEM and TEM) to study the structure of a pentacene thin film grown on a Au layer with and shown that it consists of randomly oriented amorphous pentacene clusters. We have also investigated the transport properties of amorphous pentacene in a metal-semiconductor-metal (MSM) diode structure and shown that the current is logarithmically proportional to the square root of the applied voltage, which indicates that transport occurs as the result of hopping between localized sites randomly distributed in space and energy.

  13. Monolithic Au/CeO2 nanorod framework catalyst prepared by dealloying for low-temperature CO oxidation

    Science.gov (United States)

    Zhang, Xiaolong; Duan, Dong; Li, Guijing; Feng, Wenjie; Yang, Sen; Sun, Zhanbo

    2018-03-01

    Monolithic Au/CeO2 nanorod frameworks (NFs) with porous structure were prepared by dealloying melt-spun Al89.7Ce10Au0.3 ribbons. After calcination in O2, a 3D Au/CeO2 NF catalyst with large surface area was obtained and used for low-temperature CO oxidation. The small Au clusters/nanoparticles (NPs) were in situ supported and highly dispersed on the nanorod surface, creating many nanoscale contact interfaces. XPS results demonstrated that high-concentration oxygen vacancy and Au δ+/Au0 co-existed in the calcined sample. The Au/CeO2 nanorod catalyst calcined at 400 °C exhibited much higher catalytic activity for CO oxidation compared with the dealloyed sample and bare CeO2 nanorods. Moreover, its complete reaction temperature was as low as 91 °C. The designed Au/CeO2 NF catalyst not only possessed extreme sintering resistance but also exhibited high performance owing to the enhanced interaction between the Au clusters/NPs and CeO2 nanorod during calcination.

  14. Becoming independent through au pair migration

    DEFF Research Database (Denmark)

    Dalgas, Karina Märcher

    2015-01-01

    . This article argues that, despite this critique, au pairing does play an important formative role for young Filipinas because it opens up for experiences abroad that enable them to be recognised as independent adults in Philippine society. Rather than autonomy, however, au pairs define their independence......Over the past decade, growing numbers of young Filipinas have entered Denmark on the au pair scheme. While its official aim is to broaden the cultural horizons of youth, researchers generally view Filipina au pairing as a form of labour migration using au pairs as inexpensive domestic workers...... in terms of their capacity to assume responsibility for others, thereby achieving a position of social respect. Based on ethnographic fieldwork in Denmark and the Philippines, this article explores how young Filipinas use the social, economic, and cultural resources they gain from their au pair stay abroad...

  15. L’olivier au Maroc

    OpenAIRE

    El Mouhtadi Issam; Agouzzal Mohamed; Guy François

    2014-01-01

    L’olivier est une culture traditionnelle sur le pourtour de la Méditerranée. Il est donc naturel de trouver cet arbre au Maroc où il est présent depuis des siècles. Cultivé surtout traditionnellement jusqu’à ses dernières années, il fait l’objet maintenant d’un plan de valorisation très ambitieux pour non seulement garder le Royaume à son niveau actuel (2e producteur mondial pour l’olive de conserve et 6e pour l’huile d’olive) mais pour conq...

  16. Toxicity assessment of ZnO-decorated Au nanoparticles in the Mediterranean clam Ruditapes decussatus.

    Science.gov (United States)

    Sellami, Badreddine; Mezni, Amine; Khazri, Abdelhafidh; Bouzidi, Imen; Saidani, Wiem; Sheehan, David; Beyrem, Hamouda

    2017-07-01

    The synthesis of hybrid nanomaterials has greatly increased in recent years due to their special physical and chemical properties. However, information regarding the environmental toxicity associated with these chemicals is limited, in particular in the aquatic environment. In the present study, an experiment was performed in which the marine bivalve (Ruditapes decussatus) was exposed for 14days to 2 concentrations of zinc oxide-decorated Au nanoparticles (Au-ZnONPs: Au-ZnONP50=50μg/L; Au-ZnONP100=100μg/L). The stability and resistance of Au-ZnONPs in the natural seawater were assessed by combining transmission electron microscopy and dynamic light scattering. Inductively coupled plasma-atomic emission spectroscopy revealed uptake of these nanoparticles within clams and their ability to induce metallic deregulation. The results obtained indicate that Au-ZnONPs induce biochemical and histological alterations within either the digestive gland or gill tissues at high concentration. This was deduced from the significant increase in H 2 O 2 level, superoxide dismutase and catalase activities and malondialdehyde content. Furthermore, the toxicity of Au-ZnO nanoparticles was linked with the increase of intracellular iron and calcium levels in both tissues. Histological alterations in gill and digestive gland were more pronounced with Au-ZnONP100 and this is likely related to oxidative mechanisms. Gill and digestive gland are differentially sensitive to Au-ZnONPs if the exposure concentration is higher than 50μg/L. In conclusion, the parameters considered here could constitute reliable biomarkers for evaluation of hybrid nanoparticles toxicity in environmental model organisms. In addition, based on the results obtained, gill and digestive gland of R. decussatus could be proposed as models to detect harmful effects of hybrid nanoparticles. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. A highly crystalline single Au wire network as a high temperature transparent heater.

    Science.gov (United States)

    Rao, K D M; Kulkarni, Giridhar U

    2014-06-07

    A transparent conductor which can generate high temperatures finds important applications in optoelectronics. In this article, a wire network made of Au on quartz is shown to serve as an effective high temperature transparent heater. The heater has been fabricated by depositing Au onto a cracked sacrificial template. The highly interconnected Au wire network thus formed exhibited a transmittance of ∼87% in a wide spectral range with a sheet resistance of 5.4 Ω □(-1). By passing current through the network, it could be joule heated to ∼600 °C within a few seconds. The extraordinary thermal performance and stability owe much to the seamless junctions present in the wire network. Furthermore, the wire network gets self-annealed through joule heating as seen from its increased crystallinity. Interestingly, both transmittance and sheet resistance improved following annealing to 92% and 3.2 Ω □(-1), respectively.

  18. Predicted Habitat Suitability for Montipora Corals in the Au'au Channel Region

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This raster denotes predicted habitat suitability for Montipora in the Au'au Channel region. Maximum Entropy (MaxEnt) modeling software was used to create this...

  19. Predicted Habitat Suitability for All Mesophotic Corals in the Au'au Channel Region

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This raster denotes predicted habitat suitability for all mesophotic corals in the Au'au Channel region. Maximum Entropy (MaxEnt) modeling software was used to...

  20. Predicted Habitat Suitability for Leptoseris in the Au'au Channel Region

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This raster denotes predicted habitat suitability for Leptoseris in the Au'au Channel region. Maximum Entropy (MaxEnt) modeling software was used to create this...

  1. Predicted Habitat Suitability for Porites in the Au'au Channel Region

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This raster denotes predicted habitat suitability for Porites in the Au'au Channel region. Maximum Entropy (MaxEnt) modeling software was used to create this...

  2. Predicted Habitat Suitability for Leptoseris Corals in the Au'au Channel Region

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This raster denotes predicted habitat suitability for Leptoseris in the Au'au Channel region. Maximum Entropy (MaxEnt) modeling software was used to create this...

  3. Synthesis of nir-sensitive Au-Au{sub 2}S nanocolloids for drug delivery

    Energy Technology Data Exchange (ETDEWEB)

    Ren, L.; Chow, G.M

    2003-01-15

    Near IR (NIR) sensitive Au-Au{sub 2}S nanocolloids were prepared by mixing HAuCl{sub 4} and Na{sub 2}S in aqueous solutions. An anti-tumor drug, cis-platin, was adsorbed onto Au-Au{sub 2}S nanoparticle surface via the 11-mercaptoundecanoic acid (MUA) layers. The results show that the degree of adsorption of cis-platin onto Au-Au{sub 2}S nanoparticles was controlled by the solution pH value, and the drug release was sensitive to near-infrared irradiation. The cis-platin-loaded Au-Au{sub 2}S nanocolloids can be potentially applied as NIR activated drug delivery carrier.

  4. High breakdown voltage Au/Pt/GaN Schottky diodes

    International Nuclear Information System (INIS)

    Dang, G. T.; Zhang, A. P.; Mshewa, M. M.; Ren, F.; Chyi, J.-I.; Lee, C.-M.; Chuo, C. C.; Chi, G. C.; Han, J.; Chu, S. N. G.

    2000-01-01

    Au/Pt/GaN Schottky diode rectifiers were fabricated with reverse breakdown voltage (V RB ) up to 550 V on vertically depleting structures and >2000 V on lateral devices. The figure-of-merit (V RB ) 2 /R ON , where R ON is the on-state resistance, had values between 4.2 and 4.8 MW cm -2 . The reverse leakage currents and forward on-voltages were still somewhat higher than the theoretical minimum values, but were comparable to SiC Schottky rectifiers reported in the literature. These devices show promise for use in ultrahigh-power switches. (c) 2000 American Vacuum Society

  5. Low temperature fabrication and doping concentration analysis of Au/Sb ohmic contacts to n-type Si

    Directory of Open Access Journals (Sweden)

    J. Q. Liu

    2015-11-01

    Full Text Available This paper investigates low temperature ohmic contact formation of Au/Sb to n-type Si substrates through AuSb/NiCr/Au metal stacks. Liquid epitaxy growth is utilized to incorporate Sb dopants into Si substrate in AuSi melt. The best specific contact resistivity achieved is 0.003 Ω ⋅ cm2 at 425 oC. Scanning electron microscopy (SEM reveals inverted pyramidal crater regions at the metal/semiconductor interface, indicating that AuSi alloying efficiently occurs at such sites. Secondary ion mass spectroscopy (SIMS shows that Sb atoms are successfully incorporated into Si as doping impurities during the anneal process, and the Sb doping concentration at the contact interface is found to be higher than the solid solubility limit in a Si crystal. This ohmic contacts formation method is suitable for semiconductor fabrication processes with limited thermal budget, such as post CMOS integration of MEMS.

  6. High quality ZnS/Au/ZnS transparent conductive tri-layer films deposited by pulsed laser deposition

    Science.gov (United States)

    Wang, Caifeng; Li, Qingshan; Wang, Jisuo; Zhang, Lichun; Zhao, Fengzhou; Dong, Fangying

    2016-07-01

    ZnS/Au/ZnS tri-layer films were deposited on quartz glass substrates by pulsed laser deposition. The influence of Au layer thickness on optical and electrical properties of the tri-layer ZnS/Au/ZnS was studied. X-ray diffractometer (XRD) and scanning electron microscope were employed to characterize the crystalline structure and surface morphology of the tri-layer films. Hall measurements, ultraviolet and visible spectrophotometer, four-point probe were used to explore the optoelectronic properties of the ZnS/Au/ZnS. The increase of Au layer thickness resulted in the decreased resistivity, the increased carrier concentration, and the declined transmittance in the visible light region.

  7. Low temperature fabrication and doping concentration analysis of Au/Sb ohmic contacts to n-type Si

    Energy Technology Data Exchange (ETDEWEB)

    Liu, J. Q.; Wang, C.; Zhu, T.; Wu, W. J. [MOE Key Laboratory of Fundamental Physical Quantities Measurement, School of Physics, Huazhong University of Science and Technology, Wuhan 430074 (China); Fan, J.; Tu, L. C., E-mail: tlc@hust.edu.cn [MOE Key Laboratory of Fundamental Physical Quantities Measurement, School of Physics, Huazhong University of Science and Technology, Wuhan 430074 (China); Institute of Geophysics, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2015-11-15

    This paper investigates low temperature ohmic contact formation of Au/Sb to n-type Si substrates through AuSb/NiCr/Au metal stacks. Liquid epitaxy growth is utilized to incorporate Sb dopants into Si substrate in AuSi melt. The best specific contact resistivity achieved is 0.003 Ω ⋅ cm{sup 2} at 425 {sup o}C. Scanning electron microscopy (SEM) reveals inverted pyramidal crater regions at the metal/semiconductor interface, indicating that AuSi alloying efficiently occurs at such sites. Secondary ion mass spectroscopy (SIMS) shows that Sb atoms are successfully incorporated into Si as doping impurities during the anneal process, and the Sb doping concentration at the contact interface is found to be higher than the solid solubility limit in a Si crystal. This ohmic contacts formation method is suitable for semiconductor fabrication processes with limited thermal budget, such as post CMOS integration of MEMS.

  8. Mise au point d'un vaccin en vue de l'éradication de la ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    -faire d'instituts de recherche établis au Kenya, en ce qui a trait aux maladies et aux soins à prodiguer aux bêtes malades. La recherche pourrait avoir ... IDRC and DHSC partner to fight antimicrobial resistance in animals. IDRC and the United ...

  9. Spin-glass, antiferromagnetism and Kondo behavior in Ce 2 Au Co ...

    Indian Academy of Sciences (India)

    ) and magnetoresistance of various alloys of this solid solution in order to gain better knowledge of the magnetism of these alloys. High pressure resistivity behavior is consistent with the proposal that Ce2AuSi3 lies at the left-hand side of the ...

  10. Spin-glass, antiferromagnetism and Kondo behavior in Ce 2 Au 1- ...

    Indian Academy of Sciences (India)

    ) and magnetoresistance of various alloys of this solid solution in order to gain better knowledge of the magnetism of these alloys. High pressure resistivity behavior is consistent with the proposal that Ce2AuSi3 lies at the left-hand side of the ...

  11. Femmes, migration et droits au Mali et au Sénégal | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Cette subvention permet au Groupe de recherche sur les femmes et les lois au Sénégal (GREFELS) de lever ces insuffisances. Les chercheurs vont analyser des stratégies migratoires des jeunes filles et des femmes dans les deux pays, étudier les conditions de travail des travailleuses domestiques au Sénégal, ...

  12. L’olivier au Maroc

    Directory of Open Access Journals (Sweden)

    El Mouhtadi Issam

    2014-03-01

    Full Text Available L’olivier est une culture traditionnelle sur le pourtour de la Méditerranée. Il est donc naturel de trouver cet arbre au Maroc où il est présent depuis des siècles. Cultivé surtout traditionnellement jusqu’à ses dernières années, il fait l’objet maintenant d’un plan de valorisation très ambitieux pour non seulement garder le Royaume à son niveau actuel (2e producteur mondial pour l’olive de conserve et 6e pour l’huile d’olive mais pour conquérir de nouveaux marchés au niveau mondial et profiter ainsi de l’engouement que connaît cette huile reconnue pour ses bienfaits. Le plan national « Maroc Vert » permet ainsi, grâce à des subventions conséquentes, non seulement de renouveler les vergers existant avec la variété traditionnelle picholine du Maroc, mais également la plantation de nouvelles variétés en super-intensif dans le but d’industrialiser au maximum de nouveaux vergers. Il en est de même pour la transformation des olives en huile de bonne qualité avec la mise en place d’unités de trituration modernes qui doivent supplanter à terme la multitude de « maâsra » et réduire ainsi l’impact environnemental dû aux margines. L’olive ne sera plus dans l’avenir que représentée par son huile et ses formes comestibles, mais les résidus de son extraction seront valorisés soit sous forme de combustible élaboré pour le grignon, soit sous forme d’une base de chimie verte pour les sous-produits du raffinage. D’autres applications sont actuellement à l’étude, car le Maroc à compris, comme tous les autres grands pays producteurs, que l’olive était un nouveau gisement de richesses.

  13. Electrical investigation of the Au/n{sup +}–GaAs and Au/n-porous GaAs structures

    Energy Technology Data Exchange (ETDEWEB)

    Saghrouni, H.; Hannachi, R. [Université de Sousse. Laboratoire Energie-Matériaux. Equipe de recherche caractérisations optoélectronique et spectroscopique des matériaux et nanomatériaux pour les télécommunications et capteurs, ISITCOM, 4011 Hammam Sousse (Tunisia); Jomni, S. [Laboratoire Matériaux, Organization et Propriétés, Faculté des Sciences de Tunis (Tunisia); Beji, L., E-mail: lotbej_fr@yahoo.fr [Université de Sousse. Laboratoire Energie-Matériaux. Equipe de recherche caractérisations optoélectronique et spectroscopique des matériaux et nanomatériaux pour les télécommunications et capteurs, ISITCOM, 4011 Hammam Sousse (Tunisia)

    2013-08-01

    The electrical properties of Au/n{sup +}–GaAs and Au/n-porous GaAs metal–semiconductor structures were investigated using room temperature current–voltage I(V) and capacitance–voltage C(V) measurements. The electrical parameters of these structures such as ideality factor, barrier height potential, series resistance have been calculated. The obtained parameters of Au/n-porous GaAs structure were discussed and compared to those of Au/n{sup +}–GaAs structure. The series resistances and ideality factors of the two structures were seen to have approximately the same values. Furthermore, the shunt resistance and the barrier height potential values for the Au/n-porous GaAs structure were found to be different than the ones of Au/n{sup +}–GaAs structure. Furthermore the two structures showed a non-ideal I(V) behavior with an ideality factor greater than unity. Such non ideal behavior was suggested to be due to the existence of high density of trap and the forward I(V) characteristics which were governed by space charge limited conductivity, characterized by single and exponential trapping levels in both structures (SCLC). A model based upon TFE tunneling of carriers at reverse current was used to explain the non-saturation of reverse current of the structures. The high frequency C(V) characteristics of the structure reveal the presence of an anomalous behavior at the forward bias. Though the capacitance reaches a peak, it remarkably decreases with an increasing bias voltage suggested by the presence of interface states. Furthermore, the energy distribution of interface density in the structures was determined by the forward bias C(V) measurement as well as using ideality factor and barrier height potential values obtained from forward bias I(V) and reverse bias C{sup −2}(V) characteristics, respectively. An estimated energy band diagram for the Au/n{sup +}–GaAs and Au/n-porous GaAs structures are presented.

  14. 22 CFR 62.31 - Au pairs.

    Science.gov (United States)

    2010-04-01

    ... programs under which foreign nationals are afforded the opportunity to live with an American host family and participate directly in the home life of the host family. All au pair participants provide child care services to the host family and attend a U.S. post-secondary educational institution. Au pair...

  15. Study of Au+Au relativistic collisions with the Fopi-Phase I detector; Etude des collisions relativistes Au+Au avec le detecteur Fopi-Phase I

    Energy Technology Data Exchange (ETDEWEB)

    Dupieux, P.

    1995-01-01

    Au+Au relativistic collisions, in a 100-1000 MeV energy domain per nucleon, are described. Experiments have been carried out with the SIS accelerator at GSI/Darmstadt. Data are analysed with the FOPI-phase I detector. These data are compared with IQMD model (Isospin Quantum Molecular Dynamics) Predictions. (S.G). 80 refs., 77 figs., 5 tabs.

  16. AU-EU “Strategic Partnership”

    DEFF Research Database (Denmark)

    Rodt, Annemarie Peen; Okeke, Jide

    2013-01-01

    This article appraises strategic partnership between the African Union (AU) and European Union (EU). It examines the context and nature of AU and EU security relations and explores the conditions under which partnership has a positive impact in this regard. This includes an evaluation...

  17. Travailler avec Windows 7 au CERN (FR)

    CERN Multimedia

    CERN. Geneva

    2010-01-01

    Vue d'ensemble des nouveaux concepts et des changements dans l'interface utilisateur survenus dans Windows 7 depuis les versions antérieures de Windows (XP ou Vista). La mise à disposition de Windows 7 au CERN et son intégration dans l’infrastructure de Windows au CERN seront présentées.

  18. English for au pairs the au pair's guide to learning English

    CERN Document Server

    Curtis, Lucy

    2014-01-01

    English for Au Pairs has interlinked stories about a group of au pairs new to England. Marta, an 18-year-old from Poland arrives in the UK to work as an au pair. Throughout her year-long stay she has many different experiences - some bad, some good - but with the support of her host family she finds new friends and improves her English. English for Au Pairs offers insight into the joys and difficulties of being an au pair while at the same time reinforcing English language learning through grammar explanations and exercises.

  19. Evidence for Bioavailability of Au Nanoparticles from Soil and Biodistribution within Earthworms (Eisenia fetida)

    Energy Technology Data Exchange (ETDEWEB)

    J Unrine; S Hunyadi; O Tsyusko; W Rao; A Shoults-Wilson; P Bertsch

    2011-12-31

    Because Au nanoparticles (NPs) are resistant to oxidative dissolution and are easily detected, they have been used as stable probes for the behavior of nanomaterials within biological systems. Previous studies provide somewhat limited evidence for bioavailability of Au NPs in food webs, because the spatial distribution within tissues and the speciation of Au was not determined. In this study, we provide multiple lines of evidence, including orthogonal microspectroscopic techniques, as well as evidence from biological responses, that Au NPs are bioavailable from soil to a model detritivore (Eisenia fetida). We also present limited evidence that Au NPs may cause adverse effects on earthworm reproduction. This is perhaps the first study to demonstrate that Au NPs can be taken up by detritivores from soil and distributed among tissues. We found that primary particle size (20 or 55 nm) did not consistently influence accumulated concentrations on a mass concentration basis; however, on a particle number basis the 20 nm particles were more bioavailable. Differences in bioavailability between the treatments may have been explained by aggregation behavior in pore water. The results suggest that nanoparticles present in soil from activities such as biosolids application have the potential to enter terrestrial food webs.

  20. Surface Reconstruction for Preparation of Plasmonic Au/TiO₂ Nanoparticle with Perfect Hetero Interface and Improved Photocatalytic Capacity.

    Science.gov (United States)

    Yuan, Guoqiu; Ping, Chen; Zhao, Qin; Cao, Min; Jin, Yonglong; Ge, Cunwang

    2018-07-01

    The photocatalytic activity of plasmonic Au/TiO2 nanoparticles (NPs) is dependent on distances between Au and TiO2. The preparation of plasmonic NPs is still a challenge because of an inherent lattice mismatch on heterogeneous interfaces. The combination between Au and TiO2 NPs often exhibits physical adsorption, which affect block the electron transferring process by photo-induction from TiO2 to Au NPs and weaken the photocatalytic activity. In this work an approach for preparing plasmonic Au/TiO2 NPs with perfect hetero-interface was proposed based on reconstruction of anatase TiO2 with (101) surface and in-situ reduction of Au NPs. Under UV-irradiation, anatase TiO2 NPs with a high percentage of (001) facets in formaldehyde solution undergo photochemical reactions to reconstruct the (101) surface of TiO2 and simultaneously allow polyformaldehyde to absorb on the same surface. Thus, Au(OH)-4 ions could be adsorbed on the (101) surfaces of TiO2 through electrostatic adsorption and reduced to form nano-Au in situ after recrystallization at 180 °C. The high-resolution transmission electron microscopy (HRTEM) images showed clear nanoscale lattice transition on heterogeneous interfaces of Au/TiO2 NPs. The surface structure of TiO2 NPs and the growth mechanism of Au/TiO2 NPs were evaluated with HRTEM, X-ray photoelectron spectra (XPS) and Fourier transform infrared spectroscopy (FTIR). It was demonstrated that the as-prepared plasmonic Au/TiO2 NPs had higher photocatalytic activity and corrosion resistance in comparison with primary TiO2 NPs by photo-electrochemical measurements. The reinforcing mechanism could be interpreted with Mott-Schottky analysis in terms of quantum mechanics. Our study implied that the reconstruction based synthesis may open up more opportunities to obtain lattice-mismatch nanomaterials for photocatalysis.

  1. Des fluides au grand fleuve

    OpenAIRE

    Arrago-Boruah, Émilie

    2016-01-01

    À Guwahati, capitale de l’Assam, le fleuve Brahmapoutre s’inscrit depuis quelques décennies dans le paysage urbain comme un élément essentiellement esthétique. Avant cela, il a été le théâtre de multiples affrontements, comme avec les Moghols au xviie siècle, puis la voie d’acheminement préférée de l’East India Company pour exporter les richesses de la région jusqu’à Calcutta. Pour retracer cette évolution, la lecture d’un texte ancien en sanskrit permet d’établir une comparaison entre le fle...

  2. Gas-phase experiments on Au(III) photochemistry.

    Science.gov (United States)

    Marcum, Jesse C; Kaufman, Sydney H; Weber, J Mathias

    2011-04-14

    Irradiation of AuCl(4)(-) and AuCl(2)(OH)(2)(-) in the gas-phase using ultraviolet light (220-415 nm) leads to their dissociation. Observed fragment ions for AuCl(4)(-) are AuCl(3)(-) and AuCl(2)(-) and for AuCl(2)(OH)(2)(-) are AuCl(2)(-) and AuClOH(-). All fragment channels correspond to photoreduction of the gold atom to either Au(II) or Au(I) depending on the number of neutral ligands lost. Fragment branching ratios of AuCl(4)(-) are observed to be highly energy dependent and can be explained by comparison of the experimental data to calculated threshold energies obtained using density functional theory. The main observed spectral features are attributed to ligand-to-metal charge transfer transitions. These results are discussed in the context of the molecular-level mechanisms of Au(III) photochemistry.

  3. Magnetic depth profiling of Fe/Au multilayer using neutron ...

    Indian Academy of Sciences (India)

    Au multilayer sample for characterizing the layer structure and magnetic moment density profile. Fe/Au multilayer shows strong spin-dependent scattering at interfaces, making it a prospective GMR material. Fe/Au multilayer with bilayer ...

  4. Au/Ti resistors used for Nb/Pb-alloy Josephson junctions. I. Electrical stability

    International Nuclear Information System (INIS)

    Murakami, M.; Alessandrini, E.I.; Kim, K.K.

    1984-01-01

    Bilayered Au/Ti films are very attractive for use as resistor materials of experimental Nb/Pb-alloy Josephson junction devices. In order to predict the electrical stability of the Au/Ti resistors during storage at room temperature, changes in microstructure and electrical resistivity of Ti and Au/Ti films during isothermal annealing at temperatures ranging from 298--473 K were studied using transmission electron microscopy, x-ray diffraction, and electrical measurements. Growth of Ti grains during annealing was observed in these films. The activation energy for the grain growth was determined to be 1.51 eV. Decreases in the sheet resistance measured at 4.2 K were observed at the early stages of isothermal annealing. By analyzing the annealing temperature dependence of rates of resistance changes, the activation energy of 1.49 eV was obtained. This energy value is very close to that obtained for the grain growth and, therefore, one of the main causes in the resistance decrease is believed to be due to the growth of Ti grains. Based on the present results, a model to predict the electrical resistance change for the Au/Ti films during storage at room temperature was established. The model predicted that change in the resistance can be significantly reduced by preannealing the resistors at an elevated temperature. The prediction was supported by the experiment and an excellent quantitative agreement between measured resistance values and those predicted by the model was obtained. Based on this model, the change was predicted to be -1.5% after about 3 years at room temperature, if the resistors were preannealed at 353 K for 10 h. This resistor stability is satisfactory for designing logic and memory circuits of Josephson devices, and it can be increased simply by preannealing for longer times at 353 K

  5. THE PHENOMENON OF RESISTANCE TO CHANGE: THE NATURE, TYPES AND FORMS

    OpenAIRE

    N. M. Kobzeva

    2013-01-01

    The article describes the essence of the phenomenon of resistance to change. The au-thor's definition of «resistance to change» is given. The existing approaches to the study of resistance to change are analyzed. Causes of resistance to change in organiza-tions are described. Generalizing classification of resistance to change is proposed.

  6. Controlled Synthesis of Au@AgAu Yolk-Shell Cuboctahedra with Well-Defined Facets.

    Science.gov (United States)

    Londono-Calderon, Alejandra; Bahena, Daniel; Yacaman, Miguel J

    2016-08-02

    The synthesis of Au@AgAu yolk-shell cuboctahedra nanoparticles formed by galvanic replacement in a seed-mediated method is described. Initially, single-crystal Au seeds are used for the formation of Au@Ag core-shell nanocubes, which serve as the template material for the deposition of an external Au layer. The well-controlled synthesis yields the formation of cuboctahedra nanoparticles with smooth inner and outer Au/Ag surfaces. The deposition/oxidation process is described to understand the formation of cuboctahedra and octahedra nanoparticles. The Au core maintains the initial morphology of the seed and remains static at the center of the yolk-shell because of residual Ag. Structural analysis of the shell indicates intrinsic stacking faults (SFs) near the surface. Energy dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) compositional analysis show an Au-Ag nonordered alloy forming the shell. The three-dimensional structure of the nanoparticles presented open facets on the [111] as observed by electron tomography SIRT reconstruction over a stack of high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) images. The geometrical model was validated by analyzing the direction of streaks in coherent nanobeam diffraction (NBD). The catalytic activity was evaluated using a model reaction based on the reduction of 4-nitrophenol (4-NTP) by NaBH4 in the presence of Au@AgAu yolk-shell nanoparticles.

  7. Synthesis of ultrathin face-centered-cubic Au@Pt and Au@Pd core-shell nanoplates from hexagonal-close-packed Au square sheets

    KAUST Repository

    Fan, Zhanxi

    2015-03-17

    The synthesis of ultrathin face-centered-cubic (fcc) Au@Pt rhombic nanoplates is reported through the epitaxial growth of Pt on hexagonal-close-packed (hcp) Au square sheets (AuSSs). The Pt-layer growth results in a hcp-to-fcc phase transformation of the AuSSs under ambient conditions. Interestingly, the obtained fcc Au@Pt rhombic nanoplates demonstrate a unique (101)f orientation with the same atomic arrangement extending from the Au core to the Pt shell. Importantly, this method can be extended to the epitaxial growth of Pd on hcp AuSSs, resulting in the unprecedented formation of fcc Au@Pd rhombic nanoplates with (101)f orientation. Additionally, a small amount of fcc (100)f-oriented Au@Pt and Au@Pd square nanoplates are obtained with the Au@Pt and Au@Pd rhombic nanoplates, respectively. We believe that these findings will shed new light on the synthesis of novel noble bimetallic nanostructures. Phase change: Ultrathin Au@Pt and Au@Pd core-shell nanoplates were prepared from Au square sheets. A phase transformation from hexagonal close-packed (hcp) to face-centered cubic (fcc) is observed upon coating the hcp Au square sheets with Pt or Pd under ambient conditions. The prepared fcc Au@Pt and Au@Pd rhombic nanoplates demonstrate unique (101)f orientation (picture shows a typical fcc Au@Pt rhombic nanoplate). © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Et pourquoi pas au CERN ?

    CERN Multimedia

    Staff Association

    2015-01-01

    Télétravail ou travail à distance, aménagement des horaires de travail et autres évolutions favorables à un meilleur équilibre vie privée et vie professionnelle sont adoptés par nombre d’entreprises et d’organisations !   Rendu possible grâce au développement de nouvelles technologies dont Internet, le travail à distance séduit de plus en plus de personnels, ainsi que de plus en plus de sociétés qui y trouvent des avantages en matière de gestion de l’espace, de sécurité (moins de trajets domicile-entreprise), de développement durable (moins de pollution), de motivation et de bien-être de leurs personnels. Les horaires aménagés, voire les « core-hours1 », sont également des pratiques de plus e...

  9. Substrate effects on the analysis of biomolecular layers using Au+, Au3+ and C60+ bombardments

    International Nuclear Information System (INIS)

    Kordys, Jeanette; Fletcher, John S.; Lockyer, Nicholas P.; Vickerman, John C.

    2008-01-01

    Effects of platinum silicon, graphite and PET substrates on the secondary ion yield of sub-monolayer and multilayer samples of Cyclosporin A following 20 keV Au + , Au 3 + and C 60 + impacts have been investigated. The obtained results of sub-monolayer samples show that platinum enhances the yield of the pseudo-molecular ion following Au + and Au 3 + impacts due to the high density of the substrate that enables the energy of the primary ions to be deposited near the surface. C 60 + impacts on sub-monolayer samples are less effective, but there is an enhancement on PET substrates. Impacts of 20 keV Au + and Au 3 + are not very efficient on multilayer samples. 20 keV C 60 + impacts enhance the yields significantly, especially for the relatively high molecular weight [M+H] + ion.

  10. Intense fluorescence of Au 20

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Chongqi; Harbich, Wolfgang; Sementa, Luca; Ghiringhelli, Luca; Apra, Edoardo; Stener, Mauro; Fortunelli, Alessandro; Brune, Harald

    2017-08-21

    Ligand-protected Au clusters are non-bleaching fluorescence markers in bio- and medical applications. We show that their fluorescence is an intrinsic property of the Au cluster itself. We find a very intense and sharp fluorescence peak located at λ =739.2 nm (1.68 eV) for Au20 clusters in a Ne matrix held at 6 K. The fluorescence reflects the HOMO-LUMO diabatic bandgap of the cluster. The cluster shows a very rich absorption fine structure reminiscent of well defined molecule-like quantum levels. These levels are resolved since Au20 has only one stable isomer (tetrahedral), therefore our sample is mono-disperse in cluster size and conformation. Density-functional theory (DFT) and time-dependent DFT calculations clarify the nature of optical absorptionand predict both main absorption peaks and intrinsic fluorescence in good agreement with experiment.

  11. Study of Ag and Au Nanoparticles Synthesized by Arc Discharge in Deionized Water

    Directory of Open Access Journals (Sweden)

    Der-Chi Tien

    2010-01-01

    Full Text Available The paper presents a study of Ag and Au nanofluids synthesized by the arc discharge method (ADM in deionized water. The metallic Ag nanoparticle (Ag0 and ionic Ag (Ag+ have played an important role in the battle against germs which are becoming more drug-resistant every year. Our study indicates that Ag nanoparticle suspension (SNPS fabricated by using ADM without added surfactants exclusively contains the metallic Ag nanoparticle and ionic Ag. Besides that, the ADM in deionized water has also been employed for the fabrication process of Au nanoparticles. The experimental results indicate that the prepared Ag nanoparticles can react with the dissolved H2CO3 in deionized water, leading to the formation of Ag2CO3. Significantly different to Ag, the prepared Au nanoparticles with their surfaces bonded by oxygen are suspended in deionized water by the formation of hydrogen bonded with the neighboring water molecules.

  12. Radiation Tolerance Evaluation of the Ti/Au Bilayer TES Microcalorimeter

    Science.gov (United States)

    Ishisaki, Y.; Enokijima, Y.; Ezoe, Y.; Ohashi, T.; Akamatsu, H.; Yamamoto, R.; Takei, Y.; Mitsuda, K.; Yamasaki, N. Y.; Yamada, S.

    2014-08-01

    We have developed Ti/Au bilayer transition-edge sensor (TES) microcalorimeters for future X-ray astrophysical satellite missions such as DIOS. One possible concern on the space use of TES microcalorimeters is its radiation tolerance. We have evaluated the performance of a Ti/Au bilayer (30/40 nm thick) TES microcalorimeter with 1.5 m thick Au absorber, before and after irradiation of 150 MeV proton beam with a total dose of 10 krad, corresponding to 10 years in the low Earth orbit. No significant changes on transition temperature, sensitivity, normal resistance, and critical current were observed. The energy resolution for 5.9 keV X-rays was 5.6 0.3 eV (FWHM) after the irradiation, which was slightly worse than 5.1 0.3 eV before the irradiation. We consider that our TES has sufficient radiation tolerance in orbit.

  13. Amélioration de la nutrition au Cambodge au moyen de l ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Amélioration de la nutrition au Cambodge au moyen de l'aquaculture et des jardins potagers domestiques (FCRSAI). Si l'on produit au Cambodge suffisamment de riz pour nourrir la population, la sous-alimentation maternelle et infantile y demeure quand même élevée en raison de la faible diversification des cultures et du ...

  14. Prévention de la violence chez les jeunes au Guatemala, au ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Prévention de la violence chez les jeunes au Guatemala, au Honduras et au Salvador. La violence chez les jeunes, que ceux-ci en soient victimes ou responsables, est l'un des problèmes les plus importants en Amérique centrale. Ce projet de recherche servira à évaluer les stratégies actuelles de prévention de la violence ...

  15. Proton channeling in Au at low energies

    International Nuclear Information System (INIS)

    Valdes, J.E.; Vargas, P.

    1996-01-01

    The electronic energy loss for low velocity protons channeled in the direction single crystal Au is calculated. The spatial distribution of valence electronic density in Au is calculated using Tight Binding Linear Muffin Tin Method. The proton trajectories are determined by numerical integration of the classical motion equation, and the energy loss is evaluated using the calculated valence electronic density in the friction term. The results allow to describe qualitatively the non linear behavior of energy loss with ion velocity observed experimentally. (author)

  16. Accidents Vasculaires Cerebraux (AVC) au Centre Hospitalier ...

    African Journals Online (AJOL)

    But: décrire les aspects épidémiologiques et évolutifs des AVC au CHU Kara. Méthodologie: Il s'est agi d'une étude prospective transversale monocentrique de cas d'AVC colligés du 1er juillet 2014 au 31 décembre 2015 dans le service de neurologie du CHU- KARA. Résultats: Cent soixante-quatre (164) patients ont ...

  17. Unravelling Thiol’s Role in Directing Asymmetric Growth of Au Nanorod–Au Nanoparticle Dimers

    KAUST Repository

    Huang, Jianfeng

    2015-12-15

    Asymmetric nanocrystals have practical significance in nanotechnologies but present fundamental synthetic challenges. Thiol ligands have proven effective in breaking the symmetric growth of metallic nanocrystals but their exact roles in the synthesis remain elusive. Here, we synthesized an unprecedented Au nanorod-Au nanoparticle (AuNR-AuNP) dimer structure with the assistance of a thiol ligand. On the basis of our experimental observations, we unraveled for the first time that the thiol could cause an inhomogeneous distribution of surface strains on the seed crystals as well as a modulated reduction rate of metal precursors, which jointly induced the asymmetric growth of monometallic dimers. © 2015 American Chemical Society.

  18. Apprentissages techniques : L'apprentissage au CERN

    CERN Multimedia

    2004-01-01

    APPRENTISSAGES TECHNIQUES GESTION ET DEVELOPPEMENT DU PERSONNEL HR/PMD L'APPRENTISSAGE AU CERN pour les professions d'électronicien(ne) et de laborantin(e) en physique L'apprentissage au CERN est régi par les lois, règlements et contrats en vigueur dans le Canton de Genève. En cas de réussite à l'examen de fin d'apprentissage, les apprentis obtiennent le Certificat Fédéral de Capacité Suisse (CFC). 7 places au total sont ouvertes au recrutement pour les deux professions. L'apprentissage dure 4 ans. Minima requis pour faire acte de candidature : • avoir au moins 15 ans et moins de 21 ans à la date de début de l'apprentissage • avoir terminé la scolarité obligatoire, au minimum 9ème du Cycle d'orientation genevois (3ème en France) • être ressortissant d'un pays membre du CERN (Allemagne, Autriche, Belgiqu...

  19. Corrosion Protection of Al/Au/ZnO Anode for Hybrid Cell Application.

    Science.gov (United States)

    Slaughter, Gymama; Stevens, Brian

    2015-11-16

    Effective protection of power sources from corrosion is critical in the development of abiotic fuel cells, biofuel cells, hybrid cells and biobateries for implantable bioelectronics. Corrosion of these bioelectronic devices result in device inability to generate bioelectricity. In this paper Al/Au/ZnO was considered as a possible anodic substrate for the development of a hybrid cell. The protective abilities of corrosive resistant aluminum hydroxide and zinc phosphite composite films formed on the surface of Al/Au/ZnO anode in various electrolyte environments were examined by electrochemical methods. The presence of phosphate buffer and physiological saline (NaCl) buffer allows for the formation of aluminum hyrdroxide and zinc phosphite composite films on the surface of the Al/Au/ZnO anode that prevent further corrosion of the anode. The highly protective films formed on the Al/Au/ZnO anode during energy harvesting in a physiological saline environment resulted in 98.5% corrosion protective efficiency, thereby demonstrating that the formation of aluminum hydroxide and zinc phosphite composite films are effective in the prevention of anode corrosion during energy harvesting. A cell assembly consisting of the Al/Au/ZnO anode and platinum cathode resulted in an open circuit voltage of 1.03 V. A maximum power density of 955.3 mW/ cm² in physiological saline buffer at a cell voltage and current density of 345 mV and 2.89 mA/ cm², respectively.

  20. Enhancement on field emission characteristics of pulsed laser deposited diamondlike carbon films using Au precoatings

    International Nuclear Information System (INIS)

    Chuang, F.Y.; Sun, C.Y.; Cheng, H.F.; Lin, I.N.

    1997-01-01

    Using Au precoatings has been observed to significantly enhance the field emission properties of diamondlike carbon (DLC) films deposited on Si substrates. The electron emission can be turned on at a low field as 7 V/μm and a large emission current density as 2000 μA/cm 2 can be obtained at 20 V/μm applied field. However, preannealing the Au-coated Si substrates at 500 degree C for 30 min is necessary to achieve such a performance. Microscopic examination on surface and cross-sectional morphologies of the DLC/Au/Si films using atomic force microscopy and scanning electron microscopy, respectively, in conjunction with the elemental depth profile examination of these films using secondary ion mass spectroscopy, indicated that substantial interdiffusion between DLC, Au, and Si layers has occurred. Such kind of reaction is proposed to lower the resistance for electrons to transport across the interfaces and, thereafter, enhances the field emission properties of the DLC/Au/Si films. copyright 1997 American Institute of Physics

  1. 100-MeV proton beam intensity measurement by Au activation analysis using {sup 197}Au(p, pn){sup 196}Au and {sup 197}Au(p, p3n){sup 194}Au reactions

    Energy Technology Data Exchange (ETDEWEB)

    Mokhtari Oranj, Leila [Division of Advanced Nuclear Engineering, POSTECH, Pohang 37673 (Korea, Republic of); Jung, Nam-Suk; Oh, Joo-Hee [Pohang Accelerator Laboratory, POSTECH, Pohang 37673 (Korea, Republic of); Lee, Hee-Seock, E-mail: lee@postech.ac.kr [Pohang Accelerator Laboratory, POSTECH, Pohang 37673 (Korea, Republic of)

    2016-05-15

    The proton beam intensity of a 100-MeV proton linac at the Korea Multi-purpose Accelerator Complex (KOMAC) was measured by an Au activation analysis using {sup 197}Au(p, pn){sup 196}Au and {sup 197}Au(p, p3n){sup 194}Au reactions to determine the accuracy and precision of beam intensity measurement using Gafchromic film dosimetry method. The target, irradiated by 100-MeV protons, was arranged in a stack consisting of Au, Al foils and Pb plates. The yields of produced radio-nuclei in Au foils were obtained by gamma-ray spectroscopy. The FLUKA code was employed to calculate the energy spectrum of protons onto the front surface of Au foils located at three different depth points of the target and also to investigate the condition of incident beam on the target. A good agreement was found between the beam intensity measurements using the activation analysis method at three different depth points of the target. An excellent agreement was also observed between the beam intensity measurements using the Au activation analysis method and the dosimetry method using Gafchromic film.

  2. Effect of pH on film structure and electrical property of PMMA–Au composite particles prepared by redox transmetalation

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Hong-Mao; Lin, Kuan-Ju [Department of Materials Science and Engineering, National Chung Hsing University, Taichung 402, Taiwan (China); Yu, Yi-Hsiuan; Ho, Chan-Yuan; Wei, Ming-Hsiung [Chemical System Research Division, Chung-Shan Institute of Science and Technology, Long-Tan, Tao-Yuan 325, Taiwan (China); Lu, Fu-Hsing [Department of Materials Science and Engineering, National Chung Hsing University, Taichung 402, Taiwan (China); Tseng, Wenjea J., E-mail: wenjea@dragon.nchu.edu.tw [Department of Materials Science and Engineering, National Chung Hsing University, Taichung 402, Taiwan (China)

    2014-01-15

    Surface-selective deposition of gold (Au) on electroless plated poly(methyl methacrylate)–nickel (PMMA–Ni) beads was prepared chemically by a facile redox-transmetalation route in which the Ni atoms on the PMMA surface were reacted with Au precursors, i.e., chloroauric acid (HAuCl{sub 4}), in water to form predominately core-shell PMMA–Au composite particles without the need of reducing agent. The Ni layer acted as a sacrificial template to facilitate the selective transmetalation deposition of a metallic Au film. When pH of the precursor solution was adjusted from 6 to 9, morphology of the Au film changed from a uniform particulate film consisting of assemblies of Au nanoparticles, to densely packed, continuous film with platelet Au crystals, and finally to isolated Au islands on the PMMA surface with a raspberry-like core–shell morphology. Uniformly dense Au coating with a thickness of about 200 nm was formed on the PMMA beads at pH of 7 to 8, which gave rise to an electrical resistivity as low as 3 × 10{sup −2} Ω cm.

  3. Plasmonic enhancement of the performance of dye-sensitized solar cell by core-shell AuNRs@SiO2 in composite photoanode

    Science.gov (United States)

    Bai, Lihua; Li, Meiya; Guo, Kaimo; Luoshan, Mengdai; Mehnane, Hadja Fatima; Pei, Ling; Pan, Muchen; Liao, Lei; Zhao, Xingzhong

    2014-12-01

    A series of dye-sensitized solar cells (DSSCs) with differing amounts of Au nanorods (AuNRs) (coated with a SiO2 layer as a core-shell AuNR@SiO2 (AuNRS)) composited photoanodes are prepared. The influences of different amounts of AuNRSs on the performance of the composite photoanodes and DSSCs are investigated. Studies revealed that, by increasing the amount of AuNRSs, the intensity of the light absorption spectra of the photoanodes is gradually increased while the dye absorbed is reduced. The short-circuit current density (Jsc), open-circuit voltage (Voc) and photoelectric conversion efficiency (η) increased gradually first and then decreased with the increase of AuNRSs, while the charge transfer resistance R2 and the dark current showed an opposite change trend. The optimal properties were obtained in the 2.0 wt% AuNRSs doped DSSC, with a maximum Jsc of 15.88 mA cm-2, a highest Voc of 730 mV and a best η of 7.21%, giving 20.8%, 38 mV and 23.0% higher than those of the conventional pure TiO2-based DSSC, respectively. The significant improvements in the properties of the optimal DSSC are attributed to the increase of the light coupling and thus the light absorption of the dye due to the localized surface plasmon resonance of the AuNRSs.

  4. Effect of pH on film structure and electrical property of PMMA–Au composite particles prepared by redox transmetalation

    International Nuclear Information System (INIS)

    Wu, Hong-Mao; Lin, Kuan-Ju; Yu, Yi-Hsiuan; Ho, Chan-Yuan; Wei, Ming-Hsiung; Lu, Fu-Hsing; Tseng, Wenjea J.

    2014-01-01

    Surface-selective deposition of gold (Au) on electroless plated poly(methyl methacrylate)–nickel (PMMA–Ni) beads was prepared chemically by a facile redox-transmetalation route in which the Ni atoms on the PMMA surface were reacted with Au precursors, i.e., chloroauric acid (HAuCl 4 ), in water to form predominately core-shell PMMA–Au composite particles without the need of reducing agent. The Ni layer acted as a sacrificial template to facilitate the selective transmetalation deposition of a metallic Au film. When pH of the precursor solution was adjusted from 6 to 9, morphology of the Au film changed from a uniform particulate film consisting of assemblies of Au nanoparticles, to densely packed, continuous film with platelet Au crystals, and finally to isolated Au islands on the PMMA surface with a raspberry-like core–shell morphology. Uniformly dense Au coating with a thickness of about 200 nm was formed on the PMMA beads at pH of 7 to 8, which gave rise to an electrical resistivity as low as 3 × 10 −2 Ω cm.

  5. Photoelectric properties of ZnS/Au/ZnS transparent conductive tri-layer films

    Science.gov (United States)

    Wang, Caifeng; Hu, Bo

    2017-09-01

    ZnS/Au/ZnS tri-layer films are deposited on quartz glass by pulsed laser deposition (PLD) at room temperature, and have been annealed in air at different temperatures. The effect of annealing temperature on the optical and electrical properties of ZnS/Au/ZnS tri-layer films is investigated. X-ray diffraction (XRD) patterns show that the increase in annealing temperature improves the crystallinity of the structures. Scanning electron microscope (SEM) images of the samples show that the particle size becomes larger as the annealing temperature increases. Moreover, with the increase of annealing temperature, sheet resistance of the tri-layer films decreases initially, and increases further by increasing the annealing temperature to 300 °C. High quality ZnS/Au/ZnS tri-layer films with the sheet resistance of 27 Ω/sq and the maximum optical transmittance of 86.2% in the visible light region (400-800 nm) are obtained when the sample is annealed at 200 °C. The figure of merit is calculated to evaluate the performance of ZnS/Au/ZnS tri-layer films.

  6. Effect of Au Precursor and Support on the Catalytic Activity of the Nano-Au-Catalysts for Propane Complete Oxidation

    Directory of Open Access Journals (Sweden)

    Arshid M. Ali

    2015-01-01

    Full Text Available Catalytic activity of nano-Au-catalyst(s for the complete propane oxidation was investigated. The results showed that the nature of both Au precursor and support strongly influences catalytic activity of the Au-catalyst(s for the propane oxidation. Oxidation state, size, and dispersion of Au nanoparticles in the Au-catalysts, surface area, crystallinity, phase structure, and redox property of the support are the key aspects for the complete propane oxidation. Among the studied Au-catalysts, the AuHAuCl4-Ce catalyst is found to be the most active catalyst.

  7. Toward hybrid Au nanorods @ M (Au, Ag, Pd and Pt) core-shell heterostructures for ultrasensitive SERS probes

    Science.gov (United States)

    Xie, Xiaobin; Gao, Guanhui; Kang, Shendong; Lei, Yanhua; Pan, Zhengyin; Shibayama, Tamaki; Cai, Lintao

    2017-06-01

    Being able to precisely control the morphologies of noble metallic nanostructures is of essential significance for promoting the surface-enhanced Raman scattering (SERS) effect. Herein, we demonstrate an overgrowth strategy for synthesizing Au @ M (M = Au, Ag, Pd, Pt) core-shell heterogeneous nanocrystals with an orientated structural evolution and highly improved properties by using Au nanorods as seeds. With the same reaction condition system applied, we obtain four well-designed heterostructures with diverse shapes, including Au concave nanocuboids (Au CNs), Au @ Ag crystalizing face central cube nanopeanuts, Au @ Pd porous nanocuboids and Au @ Pt nanotrepangs. Subsequently, the exact overgrowth mechanism of the above heterostructural building blocks is further analysed via the systematic optimiziation of a series of fabrications. Remarkably, the well-defined Au CNs and Au @ Ag nanopeanuts both exhibit highly promoted SERS activity. We expect to be able to supply a facile strategy for the fabrication of multimetallic heterogeneous nanostructures, exploring the high SERS effect and catalytic activities.

  8. An oscillator based on a single Au nanocluster

    Science.gov (United States)

    Gorshkov, O. N.; Filatov, D. O.; Antonov, D. A.; Antonov, I. N.; Shenina, M. E.; Pavlov, D. A.

    2017-01-01

    Metal nanoclusters embedded into the ultrathin dielectric films attracted much attention in recent years due to their unusual electronic, optical, etc., properties differing from those of the bulk metals essentially and, hence, to the prospects of their applications in novel nanoelectronic, single electronic, non-volatile memory, etc., devices. Here, we report on the experimental observation of the electrical oscillations in an oscillating loop connected to a contact of a conductive probe of an Atomic Force Microscope to a tunnel-transparent ( ˜6.5 nm thick) yttria stabilized zirconia film with embedded Au nanoclusters on the Si substrate. The oscillations were attributed to the negative differential resistance of the probe-to-sample contact originating from the resonant electron tunnelling between the probe and the Si substrate via the quantum confined electron energy levels in small ( ≈2.5 nm in diameter) Au nanoclusters. This observation demonstrates the prospects of building an oscillator nanoelectronic device based on an individual nanometer-sized metal nanocluster.

  9. Short-chained oligo(ethylene oxide)-functionalized gold nanoparticles: realization of significant protein resistance.

    Science.gov (United States)

    Riley, Kathryn R; Sims, Christopher M; Wood, Imani T; Vanderah, David J; Walker, Marlon L

    2018-01-01

    Protein corona formed on nanomaterial surfaces play an important role in the bioavailability and cellular uptake of nanomaterials. Modification of surfaces with oligoethylene glycols (OEG) are a common way to improve the resistivity of nanomaterials to protein adsorption. Short-chain ethylene oxide (EO) oligomers have been shown to improve the protein resistance of planar Au surfaces. We describe the application of these EO oligomers for improved protein resistance of 30 nm spherical gold nanoparticles (AuNPs). Functionalized AuNPs were characterized using UV-Vis spectroscopy, dynamic light scattering (DLS), and zeta potential measurements. Capillary electrophoresis (CE) was used for separation and quantitation of AuNPs and AuNP-protein mixtures. Specifically, nonequilibrium capillary electrophoresis of equilibrium mixtures (NECEEM) was employed for the determination of equilibrium and rate constants for binding between citrate-stabilized AuNPs and two model proteins, lysozyme and fibrinogen. Semi-quantitative CE analysis was carried out for mixtures of EO-functionalized AuNPs and proteins, and results demonstrated a 2.5-fold to 10-fold increase in protein binding resistance to lysozyme depending on the AuNP surface functionalization and a 15-fold increase in protein binding resistance to fibrinogen for both EO oligomers examined in this study. Graphical abstract Using capillary electrophoresis, the addition of short-chained oligo(ethylene oxide) ligands to gold nanoparticles was shown to improve protein binding resistance up to 15-fold.

  10. Multistep production of eta and hard pi(0) mesons in subthreshold Au-Au collisions

    NARCIS (Netherlands)

    Appenheimer, M; Averbeck, R; Charbonnier, Y; Diaz, J; Doppenschmidt, A; Hejny, [No Value; Hlavac, S; Holzmann, R; Kugler, A; Lohner, H; Marin, A; Metag, [No Value; Novotny, R; Ostendorf, RW; Pleskac, R; Schubert, A; Schutz, Y; Simon, RS; Stratmann, R; Stroher, H; Tlusty, P; Vogt, PH; Wagner, [No Value; Weiss, J; Wilschut, HW; Wissmann, F; Wolf, M

    1998-01-01

    The neutral pi(o) and eta mesons are studied in Au-197-Au-197 collisions at an incident energy of 800A MeV, substantially below the threshold for eta production in N-N collisions. While the gross pi(o) multiplicity increases almost linearly with the number of participant nucleons, the multiplicities

  11. Stability of gold cages (Au16 and Au17) at finite temperature

    Indian Academy of Sciences (India)

    the pyramid. Both the clusters melt around 780 K, a temperature much below the bulk melting temperature. However, Au19 undergoes a vacancy-assisted melting transition leading to a broad peak in the heat capacity curve whereas Au20 with a symmetric ground state has a well-defined peak in the heat capacity curve. 846.

  12. Charged particle density distributions in Au·Au collisions at ...

    Indian Academy of Sciences (India)

    Charged particle pseudorapidity distributions have been measured in Au·Au collisions using the BRAHMS ... Relativistic heavy-ion collisions; charged hadron production; pseudorapidity distribu- tions; centrality .... the predictions of two different theoretical models: (i) the high density gluon saturation model of Kharzeev and ...

  13. Au/ZnO nanoarchitectures with Au as both supporter and antenna of visible-light

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Tianyu; Chen, Wei; Hua, Yuxiang; Liu, Xiaoheng, E-mail: xhliu@mail.njust.edu.cn

    2017-01-15

    Highlights: • An inversed Au/ZnO nanostructure was fabricated with ZnO loaded onto Au. • The Au/ZnO nanocomposites showed enhanced properties in visible-light photocatalysis. • The SPR effect of Au was considered important for visible-light photocatalysis. - Abstract: In this paper, we fabricate Au/ZnO nanostructure with smaller ZnO nanoparticles loaded onto bigger gold nanoparticles via combining seed-mediated method and sol-gel method. The obtained Au/ZnO nanocomposites exhibit excellent properties in photocatalysis process like methyl orange (MO) degradation and oxidative conversion of methanol into formaldehyde under visible light irradiation. The enhanced properties were ascribed to the surface plasmon resonance (SPR) effect of Au nanoparticles, which could contribute to the separation of photo-excited electrons and holes and facilitate the process of absorbing visible light. This paper contributes to the emergence of multi-functional nanocomposites with possible applications in visible-light driven photocatalysts and makes the Au/ZnO photocatalyst an exceptional choice for practical applications such as environmental purification of organic pollutants in aqueous solution and the synthesis of fine chemicals and intermediates.

  14. Stability of gold cages (Au16 and Au17) at finite temperature

    Indian Academy of Sciences (India)

    2015-11-27

    Nov 27, 2015 ... We have employed ab initio molecular dynamics to investigate the stability of the smallest gold cages, namely Au16 and Au17, at finite temperatures. First, we obtain the ground state structure along with at least 50 distinct isomers for both the clusters. This is followed by the finite temperature simulations of ...

  15. Charged particle density distributions in Au·Au collisions at ...

    Indian Academy of Sciences (India)

    FOUAD RAMI, for the BRAHMS Collaboration. Institut de Recherches Subatomiques, IN2P3-CNRS, Université Louis Pasteur, Strasbourg, France. Abstract. Charged particle pseudorapidity distributions have been measured in Au·Au collisions using the BRAHMS detector at RHIC. The results are presented as a function of ...

  16. Influence of Au Nanoparticle Shape on Au@Cu2O Heterostructures

    Directory of Open Access Journals (Sweden)

    Jie Zhu

    2015-01-01

    Full Text Available Synthesis of metal-semiconductor heterostructures may allow the combination of function of the corresponding components and/or the enhanced performance resulting from the interactions between all the components. In this paper, Au@Cu2O core-shell heterostructures are prepared by a seed-growth method, using different-shaped Au nanocrystals as the seeds such as nanorods, octahedra, decahedra, dots, and nanocubes. The results revealed that the final structure of Au@Cu2O was greatly influenced by the shape of the seeds used. Exposure of Cu2O{111} and Cu2O{001} favored when the overgrowth happened on Au{111} and Au{001} surface, respectively. The size of the product can also be tuned by the amount of the seeds. The results reported here provide a thinking clue to modulate the shape and size of core-shell nanocrystals, which is useful in developing new materials with desired performance.

  17. Excitation functions for 197Au (d, p)198Au, 197Au(d, 2n)197mHg, 197Au(d, 2n)197Hg and 197Au(d, p2n)196Au

    International Nuclear Information System (INIS)

    Long Xianguan; Peng Xiufeng; He Fuqing

    1987-01-01

    By using activation method and stack-foil technique, the excitation functions for d + 197 Au reaction in 6.6-13.1 MeV energy range are measured. The measured values are compared with previous results and theoretical calculations

  18. Microwave surface resistance of bulk YBa2Cu3O6+x material

    Science.gov (United States)

    Fathy, A.; Kalokitis, D.; Belohoubek, E.; Sundar, H. G. K.; Safari, A.

    1988-10-01

    Superconducting Y-Ba-Cu-O samples were prepared by conventional solid-state reaction. The microwave surface resistance of 1:2:3 compound superconductor material was measured in a special disk resonator structure at 10 GHz. At liquid-nitrogen temperatures the microwave surface resistance is comparable to that of Au. At lower temperature (~10 K) the surface resistance is an order of magnitude lower than that of Au at the same temperature.

  19. Synthesis and characterization in AuCu–Si nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Novelo, T.E., E-mail: tenovelo@hotmail.com [Centro de Investigación en Materiales Avanzados, S.C., Laboratorio Nacional de Nanotecnología, Av. Miguel de Cervantes 120, Complejo Industrial Chihuahua, 31109 Chihuahua, Chihuahua Mexico (Mexico); Amézaga-Madrid, P. [Centro de Investigación en Materiales Avanzados, S.C., Laboratorio Nacional de Nanotecnología, Av. Miguel de Cervantes 120, Complejo Industrial Chihuahua, 31109 Chihuahua, Chihuahua Mexico (Mexico); Maldonado, R.D. [Universidad Anáhuac-Mayab, Carretera Mérida-Progreso Km. 15.5 A.P. 96-Cordemex, CP. 97310 Mérida, Yucatán Mexico (Mexico); Oliva, A.I. [Centro de Investigación y de Estudios Avanzados el IPN Unidad Mérida, Departamento de Física Aplicada, Km 6 Antigua Carretera a Progreso, A.P. 73-Cordemex, 97310 Mérida, Yucatán Mexico (Mexico); Alonzo-Medina, G.M. [Universidad Anáhuac-Mayab, Carretera Mérida-Progreso Km. 15.5 A.P. 96-Cordemex, CP. 97310 Mérida, Yucatán Mexico (Mexico)

    2015-03-15

    Au/Cu bilayers with different Au:Cu concentrations (25:75, 50:50 and 75:25 at.%) were deposited on Si(100) substrates by thermal evaporation. The thicknesses of all Au/Cu bilayers were 150 nm. The alloys were prepared by thermal diffusion into a vacuum oven with argon atmosphere at 690 K during 1 h. X-ray diffraction analysis revealed different phases of AuCu and CuSi alloys in the samples after annealing process. CuSi alloys were mainly obtained for 25:75 at.% samples, meanwhile the AuCuII phase dominates for samples prepared with 50:50 at.%. Additionally, the Au:Cu alloys with 75:25 at.%, produce Au{sub 2}Cu{sub 3} and Au{sub 3}Cu phases. The formed alloys were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS) to study the morphology and the elemental concentration of the formed alloys. - Highlights: • AuCu/Si alloy thin films were prepared by thermal diffusion. • Alloys prepared with 50 at.% of Au produce the AuCuII phase. • Alloys prepared with 75 at.% of Au produce Au{sub 3}Cu and Au{sub 2}Cu{sub 3} phases. • All alloys present diffusion of Si and Cu through the CuSi alloy formation.

  20. Synthesis and characterization in AuCu–Si nanostructures

    International Nuclear Information System (INIS)

    Novelo, T.E.; Amézaga-Madrid, P.; Maldonado, R.D.; Oliva, A.I.; Alonzo-Medina, G.M.

    2015-01-01

    Au/Cu bilayers with different Au:Cu concentrations (25:75, 50:50 and 75:25 at.%) were deposited on Si(100) substrates by thermal evaporation. The thicknesses of all Au/Cu bilayers were 150 nm. The alloys were prepared by thermal diffusion into a vacuum oven with argon atmosphere at 690 K during 1 h. X-ray diffraction analysis revealed different phases of AuCu and CuSi alloys in the samples after annealing process. CuSi alloys were mainly obtained for 25:75 at.% samples, meanwhile the AuCuII phase dominates for samples prepared with 50:50 at.%. Additionally, the Au:Cu alloys with 75:25 at.%, produce Au 2 Cu 3 and Au 3 Cu phases. The formed alloys were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM) and energy dispersive spectroscopy (EDS) to study the morphology and the elemental concentration of the formed alloys. - Highlights: • AuCu/Si alloy thin films were prepared by thermal diffusion. • Alloys prepared with 50 at.% of Au produce the AuCuII phase. • Alloys prepared with 75 at.% of Au produce Au 3 Cu and Au 2 Cu 3 phases. • All alloys present diffusion of Si and Cu through the CuSi alloy formation

  1. Au nanoparticles films used in biological sensing

    Energy Technology Data Exchange (ETDEWEB)

    Rosales Perez, M; Delgado Macuil, R; Rojas Lopez, M; Gayou, V L [Centro de Investigacion en BiotecnologIa Aplicada del IPN, Tepetitla Tlaxcala Mexico C.P. 90700 (Mexico); Sanchez Ramirez, J F, E-mail: mrosalespe@ipn.m [CICATA Legaria Instituto Politecnico Nacional, Mexico Distrito Federal (Mexico)

    2009-05-01

    Lactobacillus para paracasei are used commonly as functional food and probiotic substances. In this work Au nanoparticles self-assembled films were used for Lactobacillus para paracasei determination at five different concentrations. Functionalized substrates were immersed in a colloidal solution for one and a half hour at room temperature and dried at room temperature during four hours. After that, drops of Lactobacillus para paracasei in aqueous solution were put into the Au nanoparticles film and let dry at room temperature for another two hours. Infrared spectroscopy in attenuated total reflectance sampling mode was used to observe generation peaks due to substrate silanization, enhancement of Si-O band intensity due to the Au colloids added to silanized substrate and also to observe the enhancement of Lactobacillus para paracasei infrared intensity of the characteristic frequencies at 1650, 1534 and 1450 cm{sup -1} due to surface enhancement infrared absorption.

  2. Antiproton distributions in Au+nucleus collisions

    Energy Technology Data Exchange (ETDEWEB)

    Beavis, D.; Debbe, R. [Brookhaven National Laboratory, Upton, New York (United States); Bennett, M.J.; Chikanian, A.; Kumar, B.S.; Nagle, J.L.; Pope, J.K. [Yale University, A.W. Wright Nuclear Structure Laboratory, New Haven, Connecticut (United States); Carroll, J.B.; Hallman, T.J. [University of California at Los Angeles, Los Angeles, California (United States); Chiba, J.; Tanaka, K.H. [National Laboratory for High Energy Physics (KEK), Tsukuba (Japan); Crawford, H.J.; Cronqvist, M.; Dardenne, Y.; Engelage, J.; Greiner, L.; Kuo, C. [University of California Space Sciences Laboratory, Berkeley, California (United States); Doke, T.; Kashiwagi, T.; Kikuchi, J. [Waseda University, Tokyo (Japan); Hayano, R.S. [University of Tokyo, Tokyo (Japan); Heckman, H.H.; Lindstrom, P.J. [Lawrence Berkeley Laboratory, Berkeley, California (United States); Mitchell, J.W. [Universities Space Sciences Research Association/Goddard Space Flight Center, Greenbelt, Maryland (United States); Nagamiya, S.; Stankus, P.; Zhan, W. [Nevis Laboratory, Columbia University, Irvington, New York (United States); Welsh, R.C. [Johns Hopkins University, Baltimore, Maryland (United States)

    1997-09-01

    Experiment E878 at the BNL-AGS has measured the invariant cross sections of antiprotons produced near p{sub t}=0 in interactions of 10.8 GeV/c Au beams with targets of Al, Cu, and Au. The data were measured for a wide range of centralities and rapidities using a focusing beamline spectrometer and a high-rate centrality detector. We compare our data with the predictions of simple models and sophisticated transport models to explore the physics of antiproton production and annihilation. {copyright} {ital 1997} {ital The American Physical Society}

  3. Total structure determination of thiolate-protected Au38 nanoparticles.

    Science.gov (United States)

    Qian, Huifeng; Eckenhoff, William T; Zhu, Yan; Pintauer, Tomislav; Jin, Rongchao

    2010-06-23

    We report the total structure of Au(38)(SC(2)H(4)Ph)(24) nanoparticles determined by single crystal X-ray crystallography. This nanoparticle is based upon a face-fused Au(23) biicosahedral core, which is further capped by three monomeric Au(SR)(2) staples at the waist of the Au(23) rod and six dimeric staples with three on the top icosahedron and other three on the bottom icosahedron. The six Au(2)(SR)(3) staples are arranged in a staggered configuration, and the Au(38)S(24) framework has a C(3) rotation axis.

  4. On the Stark broadening in the Au I and Au II spectra from a helium plasma

    Science.gov (United States)

    Djeniže, S.

    2009-03-01

    The Stark FWHM (Full-Width at Half of the Maximal line intensity, W) of 5 neutral and 26 singly ionized gold (Au I and Au II, respectively) spectral lines have been measured in laboratory helium plasma at approximately 16,600 K electron temperature and 7.4 × 10 22 m - 3 electron density. Five Au I and ten Au II W values are reported for the first time. The Au II W values are compared with recent theoretical data, calculated based on a modified semi-empirical approach, and also with existing experimental W values. Our normalized Stark widths are six times higher than those measured in a laser-produced plasma. Possible explanation of this is recommended here. An agreement (within the accuracy of the experiment and uncertainties of the theoretical approach used) with the recently calculated W data was found in the 6p-7s Au II transition. The calculated hyperfine splitting for the five Au II lines in the 6s-6p transition is also presented. At the stated helium plasma conditions, Stark broadening has been found to be the dominant mechanism in the Au I and Au II line shape formation. A modified version of the linear low-pressure pulsed arc was used as a plasma source operated in helium, with gold atoms as impurities evaporated from the thin gold cylindrical plates located in the homogeneous part of the discharge, providing conditions free of self-absorption. This plasma source ensures good conditions for generation of excited gold ions due to Penning and charge exchange effects.

  5. Characterization of self-assembled electrodes based on Au-Pt nanoparticles for PEMFC application

    Energy Technology Data Exchange (ETDEWEB)

    Valenzuela, E. [Politecnica Univ. de Chiapas, Tuxtla Gutierrez, Chiapas (Mexico). Energia y Sustentabilidad; Sebastian, P.J. [Politecnica Univ. de Chiapas, Chiapas (Mexico). Energia y Sustentabilidad; Centro de Investigacion en Energia, UNAM, Morelos (Mexico); Gamboa, S.A. [Centro de Investigacion en Energia, UNAM, Morelos (Mexico); Pal, U. [Inst. de Fisica, Universidad Autonoma de Puebla Univ., Puebla (Mexico). Inst. de Fisica; Gonzalez, I. [Autonoma Metropolitana Univ. (Mexico). Dept. de Quimica

    2008-07-01

    This paper reported on a study in which membrane electrode assemblies (MEAs) were fabricated by depositing Au, Pt and AuPt nanoparticles on Nafion 115 membrane for use in a proton exchange membrane fuel cell (PEMFC). A Rotating Disc Electrode (RDE) was used to measure the nanoparticle catalyst activity. After deposition of the nanoparticles on the membrane, the surface was studied by Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS). The membrane proton conduction process was studied by Electrochemical Impedance Spectroscopy (EIS) with the 4 probe technique. The MEAs fabricated with Nafion/Metal membranes were evaluated in a PEMFC under standard conditions. Colloidal solutions were used to prepare self-assembled electrodes with nanoparticles deposited on Nafion membrane. The particles deposited on Nafion showed good stability and had homogeneous distribution along the membrane surface. The impedance results revealed an increase in the membrane proton resistance of the self-assembled electrodes compared to unmodified Nafion. The Au-Pt nanoparticles were obtained by chemical reduction. The nanoparticle size in the three systems was about 2 nm. The self-assembled electrodes performed well in standard conditions. The optimum colloidal concentration and immersion time must be determined in order to obtain good catalytic activity and high membrane conductance. The self-assembled Nafion/AuPt had the best open circuit potential (887 mV). The Au and Pt self-assemblies showed a similar performance in terms of maximum power and maximum current density. The performance of the Nafion/Au self-assembly was influenced more by ohmic losses, particularly in the membrane. The maximum power generation was obtained at 0.35 V. The mass transport losses increased after this value, thereby affecting the efficiency of the PEMFC. 2 figs.

  6. Influence of Au Nanoparticle Shape on Au@Cu2O Heterostructures

    OpenAIRE

    Zhu, Jie; Lu, Na; Chen, Wei; Kong, Lina; Yang, Yun; Ma, Dekun; Huang, Shaoming

    2015-01-01

    Synthesis of metal-semiconductor heterostructures may allow the combination of function of the corresponding components and/or the enhanced performance resulting from the interactions between all the components. In this paper, Au@Cu2O core-shell heterostructures are prepared by a seed-growth method, using different-shaped Au nanocrystals as the seeds such as nanorods, octahedra, decahedra, dots, and nanocubes. The results revealed that the final structure of Au@Cu2O was greatly influenced by ...

  7. Characterizing Weak-Link Effects in Mo/Au Transition-Edge Sensors

    Science.gov (United States)

    Smith, Stephen

    2011-01-01

    We are developing Mo/Au bilayer transition-edge sensors (TESs) for applications in X-ray astronomy. Critical current measurements on these TESs show they act as weak superconducting links exhibiting oscillatory, Fraunhofer-like, behavior with applied magnetic field. In this contribution we investigate the implications of this behavior for TES detectors, under operational bias conditions. This includes characterizing the logarithmic resistance sensitivity with temperature, (alpha, and current, beta, as a function of applied magnetic field and bias point within the resistive transition. Results show that these important device parameters exhibit similar oscillatory behavior with applied magnetic field, which in turn affects the signal responsivity, noise and energy resolution.

  8. A novel Au SINE sequence found in a gymnosperm.

    Science.gov (United States)

    Yagi, Eiki; Akita, Toru; Kawahara, Taihachi

    2011-01-01

    Although many SINE families have been identified in the animal kingdom, only a few SINE families have been identified in plants, and their distribution is somewhat limited. The Au SINE (Au) has been found discontinuously in basal angiosperms, monocots, and eudicots. In this study, we examined the presence of the Au in gymnosperms and ferns by PCR using internal primers for Au. As a result, we found Au in a gymnosperm species, Ephedra ciliata. Therefore, Au was supposed to be present in the common ancestor of angiosperms and gymnosperms. The Au in E. ciliate was 15 bp shorter than the consensus sequence, which is similar to the Au SINE found in Glycine. However, the 3'end of the Au found in E. ciliate was more similar to the 3'end of the Medicago-type Au than that of the Glycine-type Au. A phylogenetic tree indicated that the Au sequence from E. ciliate is more closely related to the sequence found in Glycine than that found in Medicago/Lotus. These results indicated that Au were present in both angiosperms and gymnosperms.

  9. Demonstration of Improved Charge Transfer in Graphene/Au Nanorods Plasmonic Hybrids Stabilized by Benzyl Thiol Linkers

    Directory of Open Access Journals (Sweden)

    Giuseppe Valerio Bianco

    2016-01-01

    Full Text Available Hybrids based on graphene decorated with plasmonic gold (Au nanostructures are being investigated as possible materials combination to add to graphene functionalities of tunable plasmon resonance and enhanced absorption at selected wavelength in the visible-near-infrared region of the spectrum. Here, we report a solution drop-casting approach for fabricating stable hybrids based on chemical vapor deposition (CVD graphene and Au nanorods, which are able to activate effective charge transfer from graphene. We demonstrate that CVD graphene functionalization by benzyl thiol (BZT provides the linker to strong anchoring, via S-Au bonds, Au nanorods to graphene. Optical measurements by spectroscopic ellipsometry give evidence of the introduction of plasmon resonances at 1.85 and 2.25 eV in the Au nanorods/BZT/graphene hybrids, which enable surface enhanced Raman scattering (SERS detection. Furthermore, an effective electron transfer from graphene to Au nanorods, resulting in an enhancement of p-type doping of graphene with a consequent decrease of its sheet resistance, is probed by Raman spectroscopy and corroborated by electrical measurements.

  10. Au thin films deposited on SnO2:In and glass: Substrate effects on the optical and electrical properties

    International Nuclear Information System (INIS)

    Lansaker, P.C.; Gunnarsson, K.; Roos, A.; Niklasson, G.A.; Granqvist, C.G.

    2011-01-01

    We report on a detailed study on the optical and electrical properties of Au films made by sputter deposition onto glass substrates with and without transparent and electrically conducting layers of SnO 2 :In. The Au films had thicknesses up to 10.7 nm and hence spanned the range for thin film growth from discrete islands, via large scale coalescence and formation of a meandering conducting network, to the formation of a more or less 'holey' film. Scanning electron microscopy and atomic force microscopy demonstrated that the SnO 2 :In films were considerably rougher than the glass itself, and this roughness influenced the Au film formation so that large scale coalescence set in at a somewhat larger thickness for films on SnO 2 :In than on glass. Measurements of spectral optical transmittance and reflectance and of electrical resistance gave a fully consistent picture that could be reconciled with impeded Au film formation on the SnO 2 :In layer; this led to pronounced 'plateaus' in the near infrared optical spectra for Au films on SnO 2 :In and a concomitant change from such two-layer films having a lower resistance than the single gold film at thicknesses below large scale coalescence to the opposite behavior for larger film thicknesses. Our work highlights the importance of the substrate roughness for transparent conductors comprising coinage metal films backed by wide band gap transparent conducting oxides.

  11. Didaktik des außerschulischen Lernens

    CERN Document Server

    Sauerborn, Petra

    2012-01-01

    Kernprobleme schulischer Bildung sind die zunehmenden Verluste an Realitäts- und Praxisbezug sowie die einseitige Betonung der fachwissenschaftlichen Kenntnisse. In jüngster Zeit werden insbesondere moderne didaktisch-methodische Konzepte näher diskutiert und praktiziert. So finden sich etwa die Stichwörter Handlungsorientierter Unterricht und Offener Unterricht in der fachdidaktischen Diskussion wieder. Eine wesentlich aktuellere Form stellt das außerschulische Lernen dar. Ein modernes pädagogisches Verständnis sieht den Unterricht heute nicht mehr als ausschließliche Tätigkeit des Lehrers an, sondern als Aktivität der Lernenden. Außerschulisches Lernen beschreibt die originale Begegnung im Unterricht außerhalb des Klassenzimmers. An außerschulischen Lernorten findet eine unmittelbare AuseinanderSetzung des Lernenden mit seiner räumlichen Umgebung statt. Charakteristisch sind hierbei vor allem die aktive(Mit-)Gestaltung sowie die eigenständige Wahrnehmung mehrperspektivischer Bildungsinhalte d...

  12. Melamine structures on the Au(111) surface

    NARCIS (Netherlands)

    Silly, Fabien; Shaw, Adam Q.; Castell, Martin R.; Briggs, G. A. D.; Mura, Manuela; Martsinovich, Natalia; Kantorovich, Lev

    2008-01-01

    We report on a joint experimental and theoretical study of the ordered structures of melamine molecules formed on the Au(111)-(22 x root 3) surface. Scanning tunneling microscopy (STM) images taken under UHV conditions reveal two distinct monolayers one of which has never been reported before on

  13. Surface structure of AU3Cu(001)

    DEFF Research Database (Denmark)

    Eckstein, G.A.; Maupai, S.; Dakkouri, A.S.

    1999-01-01

    The surface morphology, composition, and structure of Au3Cu(001) as determined by scanning tunneling microscopy and surface x-ray diffraction are presented. Atomic resolution STM images reveal distinctive geometric features. The analysis of the surface x-ray diffraction data provides clear evidence...... for the surface structure. [S0163-1829(99)04535-X]....

  14. ( Vigna subterranea (L.) Verdcourt) au Burkina Faso

    African Journals Online (AJOL)

    Aperçu de la culture du voandzou ( Vigna subterranea (L.) Verdcourt) au Burkina Faso: enjeux et perspectives d'amélioration de sa productivité. ... Foliar diseases and insects in stock are major biotic constraints. Producers retain the seed in cans tightly closed. The average cycle of cultivated varieties is 90 days. The favorite ...

  15. Au-nano-delci in njihova uporaba

    OpenAIRE

    Rudolf, Rebeka; Zorko, Lidija; Anžel, Ivan

    2012-01-01

    Razvoj tehnik za sintezo Au-nano delcev z določeno velikostjo, obliko in sestavo je izziv in pomembno področje raziskav v nanotehnologiji. Zlati nanodelci so namreč atraktivni zaradi potencialne uporabe v elektrokemiji in medicini, kot tudi za proizvodnjo različnih nano-naprav.

  16. HYPERTENSION AU COURS DE LA GROSSESSE: Aspects ...

    African Journals Online (AJOL)

    hypertension soit une prévalence de 8,2%. Cette pathologie survient dans notre .... consultations prénatales ou le post-partum. Sur le plan clinique, la ... des patientes étaient au terme de leur grossesse alors que 22.11%, avaient un âge ...

  17. Irrigation et intensification de la production agricole au Sahel ...

    African Journals Online (AJOL)

    Irrigation et intensification de la production agricole au Sahel : perceptions paysannes sur la double riziculture et les variétés de riz utilisées sur les aménagements hydro - agricoles au Niger.

  18. Molecules on vicinal Au surfaces studied by scanning tunnelling microscopy

    International Nuclear Information System (INIS)

    Kroeger, J; Neel, N; Jensen, H; Berndt, R; Rurali, R; Lorente, N

    2006-01-01

    Using low-temperature scanning tunnelling microscopy and spectroscopy we investigated the adsorption characteristics of 3,4,9,10-perylenetetracarboxylic-dianhydride and fullerenes on Au(788), Au(433), and Au(778). On Au(788) and Au(778), 3,4,9,10-perylenetetracarboxylic-dianhydride exhibits three coexisting superstructures, which do not reflect the periodicity of the hosting substrate. The adsorption on Au(433) leads to the formation of molecule chains along the step edges after annealing the sample. Fullerene molecules on Au(788) arrange in a mesh of islands, which extends over several hundreds of nanometres with an extraordinarily high periodicity. A combination of fullerene adsorption and annealing leads to facetting of Au(433) and the formation of extraordinarily long fullerene stripes

  19. Three-particle correlations from parton cascades in Au+Au collisions

    International Nuclear Information System (INIS)

    Ma, G.L.; Ma, Y.G.; Zhang, S.; Cai, X.Z.; Chen, J.H.; He, Z.J.; Huang, H.Z.; Long, J.L.; Shen, W.Q.; Shi, X.H.; Zhong, C.; Zuo, J.X.

    2007-01-01

    We present a study of three-particle correlations among a trigger particle and two associated particles in Au+Au collisions at s NN =200 GeV using a multi-phase transport model (AMPT) with both partonic and hadronic interactions. We found that three-particle correlation densities in different angular directions with respect to the triggered particle ('center', 'cone', 'deflected', 'near' and 'near-away') increase with the number of participants. The ratio of 'deflected' to 'cone' density approaches to 1.0 with the increasing of number of participants, which indicates that partonic Mach-like shock waves can be produced by strong parton cascades in central Au+Au collisions

  20. Au@polymer core-shell nanoparticles for simultaneously enhancing efficiency and ambient stability of organic optoelectronic devices.

    Science.gov (United States)

    Kim, Taesu; Kang, Hyunbum; Jeong, Seonju; Kang, Dong Jin; Lee, Changyeon; Lee, Chun-Ho; Seo, Min-Kyo; Lee, Jung-Yong; Kim, Bumjoon J

    2014-10-08

    In this paper, we report and discuss our successful synthesis of monodispersed, polystyrene-coated gold core-shell nanoparticles (Au@PS NPs) for use in highly efficient, air-stable, organic light-emitting diodes (OLEDs) and organic photovoltaics (OPVs). These core-shell NPs retain the dual functions of (1) the plasmonic effect of the Au core and (2) the stability and solvent resistance of the cross-linked PS shell. The monodispersed Au@PS NPs were incorporated into a poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) film that was located between the ITO substrate and the emitting layer (or active layer) in the devices. The incorporation of the Au@PS NPs provided remarkable improvements in the performances of both OLEDs and OPVs, which benefitted from the plasmonic effect of the Au@PS NPs. The OLED device with the Au@PS NPs achieved an enhancement of the current efficiency that was 42% greater than that of the control device. In addition, the power conversion efficiency was increased from 7.6% to 8.4% in PTB7:PC71BM-based OPVs when the Au@PS NPs were embedded. Direct evidence of the plasmonic effect on optical enhancement of the device was provided by near-field scanning optical microscopy measurements. More importantly, the Au@PS NPs induced a remarkable and simultaneous improvement in the stabilities of the OLED and OPV devices by reducing the acidic and hygroscopic properties of the PEDOT:PSS layer.

  1. Parameter Comparison for Low-Noise MoAu TES Bolometers

    Science.gov (United States)

    Benford, D. J.; Moseley, S. H.; Staguhn, J. G.; Allen, C. A.; Chervenak, J. A.; Stevenson, T. R.; Hsieh, W.

    2003-01-01

    We describe a comparative investigation of the parameters of MoAu-bilayer Transition Edge Sensor (TES) bolometers designed for infrared detectors. A set of devices with variations in geometry were fabricated at the NASA/GSFC detector development facility. These detectors have different bilayer aspect ratios (providing differing normal state resistances and current densities), and have varieties of normal metal regions to study the effects of geometry on noise. These normal metal regions are oriented either parallel to or transverse to the direction of current flow, or both. The lowest noise detectors are found to have normal metal regions oriented transversely. For about a dozen different devices, we have measured a large set of parameters by means of a suite of tests. These include complex impedance measurements to derive time constants; IV curves to determine resistance and power; thermal conductance measurements; noise measurements as a function of device resistance; and &rect resistance vs. temperature measurements .

  2. Strangeness production in Au+Au collisions at the AGS: recent results from E917

    International Nuclear Information System (INIS)

    Chang, W.-C.; Back, B.B.; Betts, R.R.; Britt, H.C.; Chang, W.C.; Gillitzer, A.; Henning, W.F.; Hofman, D.J.; Holzman, B.; Nanal, V.; Wuosmaa, A.H.

    1999-01-01

    Strangeness production in Au+Au collisions has been measured via the yields of K + , K - at 6, 8 AGeV and of bar Λ at 10.8 AGeV beam kinetic energy in experiment E917. By varying the collision centrally and beam energy, a systematic search for indications of new phenomena and in-medium effects under high baryon density is undertaken

  3. Bonheur et progrès : mesurer le bien-être au Bhoutan et au Canada ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    31 janv. 2011 ... Mesurer le bien-être. Au Bhoutan, ce tableau de bord porte un nom plein de charme. C'est le bonheur national brut (BNB). Le royaume est-himalayen, bouddhiste, compte environ 800 000 sujets. Enclavé entre les deux pays les plus populeux de la planète, il vient de mettre fin au long isolement qu'il s'était ...

  4. Results from experiment E917 for Au + Au collisions at the AGS.

    Energy Technology Data Exchange (ETDEWEB)

    Back, B. B.; Betts, R. R.; Chang, J.; Chang, W. C.; E917 Collaboration; Gillitzer, A.; Henning, W. F.; Hofman, D. J.; Nanal, V.; Wuosmaa, A. H.

    1999-08-04

    The effects of baryon stopping and its resulting energy deposition on the dynamics of Au + Au collisions at 6, 8 and 10.8 GeV/nucleon are explored with recent results from the AGS experiment E917. Current analyses of stopping, collective flow signals and HBT parameters are presented. Strangeness and anti-baryon production is examined using the yields of anti-lambdas and anti-protons.

  5. A first look at Au·Au collisions at RHIC energies using the PHOBOS ...

    Indian Academy of Sciences (India)

    A first look at Au·Au collisions at RHIC energies using the PHOBOS detector. BIRGER BACK1, for the PHOBOS Collaboration. M D Baker2, D S Barton2, R R Betts6, R Bindel7, A Budzanowski3, W Busza4,. A Carroll2, J Corbo2, M P Decowski4, E Garcia6, N George1, K Gulbrandsen4, S Gushue2,. C Halliwell6, J Hamblen8, ...

  6. Comparative toxicity study of Ag, Au, and Ag-Au bimetallic nanoparticles on Daphnia magna.

    Science.gov (United States)

    Li, Ting; Albee, Brian; Alemayehu, Matti; Diaz, Rocio; Ingham, Leigha; Kamal, Shawn; Rodriguez, Maritza; Bishnoi, Sandra Whaley

    2010-09-01

    A comparative assessment of the 48-h acute toxicity of aqueous nanoparticles synthesized using the same methodology, including Au, Ag, and Ag-Au bimetallic nanoparticles, was conducted to determine their ecological effect in freshwater environments through the use of Daphnia magna, using their mortality as a toxicological endpoint. D. magna are one of the standard organisms used for ecotoxicity studies due to their sensitivity to chemical toxicants. Particle suspensions used in toxicity testing were well-characterized through a combination of absorbance measurements, atomic force or electron microscopy, flame atomic absorption spectrometry, and dynamic light scattering to determine composition, aggregation state, and particle size. The toxicity of all nanoparticles tested was found to be dose and composition dependent. The concentration of Au nanoparticles that killed 50% of the test organisms (LC(50)) ranged from 65-75 mg/L. In addition, three different sized Ag nanoparticles (diameters = 36, 52, and 66 nm) were studied to analyze the toxicological effects of particle size on D. magna; however, it was found that toxicity was not a function of size and ranged from 3-4 μg/L for all three sets of Ag nanoparticles tested. This was possibly due to the large degree of aggregation when these nanoparticles were suspended in standard synthetic freshwater. Moreover, the LC(50) values for Ag-Au bimetallic nanoparticles were found to be between that of Ag and Au but much closer to that of Ag. The bimetallic particles containing 80% Ag and 20% Au were found to have a significantly lower toxicity to Daphnia (LC(50) of 15 μg/L) compared to Ag nanoparticles, while the toxicity of the nanoparticles containing 20% Ag and 80% Au was greater than expected at 12 μg/L. The comparison results confirm that Ag nanoparticles were much more toxic than Au nanoparticles, and that the introduction of gold into silver nanoparticles may lower their environmental impact by lowering the amount

  7. Des institutions au service de villes sûres et inclusives au Venezuela

    International Development Research Centre (IDRC) Digital Library (Canada)

    Caracas, au Venezuela, est l'une des villes les plus violentes au monde; il s'y commet 122 homicides par tranche de 100 000 habitants. Selon les experts en violence urbaine, les inégalités sociales et la disparité des revenus sont étroitement liées à l'ampleur de la violence, mais cette théorie ne tient pas dans le cas ...

  8. Relégation au village

    Directory of Open Access Journals (Sweden)

    Nicolas Renahy

    2010-12-01

    Full Text Available Les thèses de l’individualisation des sociétés occidentales, ou de l’exclusion de ceux qui resteraient en marge d’une vaste classe moyenne aux modes de vie homogénéisés, ont sans doute permis de sortir d’une grille de lecture rigide héritée du marxisme. Mais elles résistent aujourd’hui mal aux faits et sont vivement contredites par le renouvellement des études sur les inégalités sociales pensées en termes de stratification. Enquêtant la population ouvrière d’un village industriel de Bourgogne au cours des années 1990, l’auteur a pu mesurer tout autant la force socialisatrice continue du groupe ouvrier sur sa jeunesse que le lent processus de délitement de ses cadres de références, longtemps stabilisés autour d’une mono-industrie métallurgique, provoquant une crise dans la reproduction de ce monde ouvrier. C’est cette crise de reproduction qui est évoquée ici. Dans un premier temps sont explicitées les formes passées de la présence industrielle au village, qui n’a jamais été celle d’un bastion de la grande industrie – la population locale n’est pas structurellement différenciée de celle de son environnement rural immédiat. L’exemple d’une lignée familiale d’artisans montre pour finir l’étroit maillage entre usine et structures sociales plus classiquement rurales, favorisant la constitution d’un capital d’autochtonie, déclinaison populaire du capital social.Relegation to the villageArguments demonstrating the individualisation of western societies, or the exclusion of those who stay on the margins of a vast middle class homogeneous life style, have no doubt allowed the move away from the rigid interpretations inherited from Marxism. However, these arguments resist today in spite of the facts and they are even keenly contradicted by the renewal of stratification studies on social inequalities. Analyzing the working population of an industrial village in Bourgogne during the

  9. The effect of Au amount on size uniformity of self-assembled Au nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Chen, S-H; Wang, D-C; Chen, G-Y; Chen, K-Y [Graduate School of Engineering Science and Technology, National Yunlin University of Science and Technology, Taiwan (China)

    2008-03-15

    The self-assembled fabrication of nanostructure, a dreaming approach in the area of fabrication engineering, is the ultimate goal of this research. A finding was proved through previous research that the size of the self-assembled gold nanoparticles could be controlled with the mole ratio between AuCl{sub 4}{sup -} and thiol. In this study, the moles of Au were fixed, only the moles of thiol were adjusted. Five different mole ratios of Au/S with their effect on size uniformity were investigated. The mole ratios were 1:1/16, 1:1/8, 1:1, 1:8, 1:16, respectively. The size distributions of the gold nanoparticles were analyzed by Mac-View analysis software. HR-TEM was used to derive images of self-assembled gold nanoparticles. The result reached was also the higher the mole ratio between AuCl{sub 4}{sup -} and thiol the bigger the self-assembled gold nanoparticles. Under the condition of moles of Au fixed, the most homogeneous nanoparticles in size distribution derived with the mole ratio of 1:1/8 between AuCl{sub 4}{sup -} and thiol. The obtained nanoparticles could be used, for example, in uniform surface nanofabrication, leading to the fabrication of ordered array of quantum dots.

  10. Programmation religieuse au Moyen-Orient : analyse du contenu de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Intégration des militants islamistes au processus politique : Hamas palestinien. La victoire éclatante du Hamas aux élections de janvier 2006 porte à s'interroger sur l'intégration des militants islamistes au système politique palestinien. Voir davantageIntégration des militants islamistes au processus politique : Hamas ...

  11. A reagentless amperometric immunosensor based on nano-au and ...

    African Journals Online (AJOL)

    Jane

    2011-08-01

    Aug 1, 2011 ... In this paper, carboxyl-ferrocene (Fc-COOH) was explored to label alphafetoprotein antibody (anti-AFP), which was then mixed with AU nanoparticles (nano-Au) and multi-walled carbon nanotubes (MWCNTs) dispersed by chitosan (CS) to form the nano-Au/MWCNTs/anti-AFP-Fc chitosan composite.

  12. Magnetic depth profiling of Fe/Au multilayer using neutron ...

    Indian Academy of Sciences (India)

    We present unpolarized and polarized neutron reflectometry data on Fe/Au multilayer sample for characterizing the layer structure and magnetic moment density profile. Fe/Au multilayer shows strong spin-dependent scattering at interfaces, making it a prospective GMR material. Fe/Au multilayer with bilayer thickness of 130 ...

  13. Viscoelastic nature of Au nanoparticle–PDMS nanocomposite gels

    Indian Academy of Sciences (India)

    A stable gel of Au nanoparticles in polydimethylsiloxane (PDMS) nanocomposite is prepared by employing the curing agent of PDMS elastomer as a reducing agent for the formation of Au nanoparticles by an in-situ process. The viscoelastic nature of these gels is very sensitive to the Au nanoparticle loading and the ...

  14. Preparation and use of 195m Au-containing liquid

    International Nuclear Information System (INIS)

    Panek, K.J.

    1983-01-01

    A 195m Au-containing liquid is prepared by adsorbing 195m-Hg on an adsorption agent and then eluting the daughter radioisotope 195m-Au. A radioisotope generator and the adsorption agent to be used in preparation of 195m Au-containing liquids are also claimed

  15. The point-defect of carbon nanotubes anchoring Au nanoparticles

    DEFF Research Database (Denmark)

    Lv, Y. A.; Cui, Y. H.; Li, X. N.

    2010-01-01

    between Au clusters and CNTs by means of density functional theory calculations. Both experimental and theoretical studies show that point defects are the anchoring sites of Au nanoparticles. The mechanisms of enhanced bond between Au and CNTs via the point defects are explained by the analysis of density...

  16. A reagentless amperometric immunosensor based on nano-au and ...

    African Journals Online (AJOL)

    In this paper, carboxyl-ferrocene (Fc-COOH) was explored to label alphafetoprotein antibody (anti-AFP), which was then mixed with AU nanoparticles (nano-Au) and multi-walled carbon nanotubes (MWCNTs) dispersed by chitosan (CS) to form the nano-Au/MWCNTs/anti-AFP-Fc chitosan composite. After that, the composite ...

  17. The point-defect of carbon nanotubes anchoring Au nanoparticles

    DEFF Research Database (Denmark)

    Lv, Y. A.; Cui, Y. H.; Li, X. N.

    2010-01-01

    The understanding of the interaction between Au and carbon nanotubes (CNTs) is very important since Au/CNTs composites have wide applications in many fields. In this study, we investigated the dispersion of Au nanoparticles on the CNTs by transmission electron microscopy and the bonding mechanism...

  18. Jet-Hadron Correlations in √sNN =200 GeV p +p and Central Au +Au Collisions

    Science.gov (United States)

    Adamczyk, L.; Adkins, J. K.; Agakishiev, G.; Aggarwal, M. M.; Ahammed, Z.; Alekseev, I.; Alford, J.; Anson, C. D.; Aparin, A.; Arkhipkin, D.; Aschenauer, E. C.; Averichev, G. S.; Banerjee, A.; Beavis, D. R.; Bellwied, R.; Bhasin, A.; Bhati, A. K.; Bhattarai, P.; Bichsel, H.; Bielcik, J.; Bielcikova, J.; Bland, L. C.; Bordyuzhin, I. G.; Borowski, W.; Bouchet, J.; Brandin, A. V.; Brovko, S. G.; Bültmann, S.; Bunzarov, I.; Burton, T. P.; Butterworth, J.; Caines, H.; Calderón de la Barca Sánchez, M.; Cebra, D.; Cendejas, R.; Cervantes, M. C.; Chaloupka, P.; Chang, Z.; Chattopadhyay, S.; Chen, H. F.; Chen, J. H.; Chen, L.; Cheng, J.; Cherney, M.; Chikanian, A.; Christie, W.; Chwastowski, J.; Codrington, M. J. M.; Contin, G.; Cramer, J. G.; Crawford, H. J.; Cui, X.; Das, S.; Davila Leyva, A.; De Silva, L. C.; Debbe, R. R.; Dedovich, T. G.; Deng, J.; Derevschikov, A. A.; Derradi de Souza, R.; Dhamija, S.; di Ruzza, B.; Didenko, L.; Dilks, C.; Ding, F.; Djawotho, P.; Dong, X.; Drachenberg, J. L.; Draper, J. E.; Du, C. M.; Dunkelberger, L. E.; Dunlop, J. C.; Efimov, L. G.; Engelage, J.; Engle, K. S.; Eppley, G.; Eun, L.; Evdokimov, O.; Eyser, O.; Fatemi, R.; Fazio, S.; Fedorisin, J.; Filip, P.; Finch, E.; Fisyak, Y.; Flores, C. E.; Gagliardi, C. A.; Gangadharan, D. R.; Garand, D.; Geurts, F.; Gibson, A.; Girard, M.; Gliske, S.; Greiner, L.; Grosnick, D.; Gunarathne, D. S.; Guo, Y.; Gupta, A.; Gupta, S.; Guryn, W.; Haag, B.; Hamed, A.; Han, L.-X.; Haque, R.; Harris, J. W.; Heppelmann, S.; Hirsch, A.; Hoffmann, G. W.; Hofman, D. J.; Horvat, S.; Huang, B.; Huang, H. Z.; Huang, X.; Huck, P.; Humanic, T. J.; Igo, G.; Jacobs, W. W.; Jang, H.; Judd, E. G.; Kabana, S.; Kalinkin, D.; Kang, K.; Kauder, K.; Ke, H. W.; Keane, D.; Kechechyan, A.; Kesich, A.; Khan, Z. H.; Kikola, D. P.; Kisel, I.; Kisiel, A.; Koetke, D. D.; Kollegger, T.; Konzer, J.; Koralt, I.; Kotchenda, L.; Kraishan, A. F.; Kravtsov, P.; Krueger, K.; Kulakov, I.; Kumar, L.; Kycia, R. A.; Lamont, M. A. C.; Landgraf, J. M.; Landry, K. D.; Lauret, J.; Lebedev, A.; Lednicky, R.; Lee, J. H.; LeVine, M. J.; Li, C.; Li, W.; Li, X.; Li, X.; Li, Y.; Li, Z. M.; Lisa, M. A.; Liu, F.; Ljubicic, T.; Llope, W. J.; Lomnitz, M.; Longacre, R. S.; Luo, X.; Ma, G. L.; Ma, Y. G.; Madagodagettige Don, D. M. M. D.; Mahapatra, D. P.; Majka, R.; Margetis, S.; Markert, C.; Masui, H.; Matis, H. S.; McDonald, D.; McShane, T. S.; Minaev, N. G.; Mioduszewski, S.; Mohanty, B.; Mondal, M. M.; Morozov, D. A.; Mustafa, M. K.; Nandi, B. K.; Nasim, Md.; Nayak, T. K.; Nelson, J. M.; Nigmatkulov, G.; Nogach, L. V.; Noh, S. Y.; Novak, J.; Nurushev, S. B.; Odyniec, G.; Ogawa, A.; Oh, K.; Ohlson, A.; Okorokov, V.; Oldag, E. W.; Olvitt, D. L., Jr.; Pachr, M.; Page, B. S.; Pal, S. K.; Pan, Y. X.; Pandit, Y.; Panebratsev, Y.; Pawlak, T.; Pawlik, B.; Pei, H.; Perkins, C.; Peryt, W.; Pile, P.; Planinic, M.; Pluta, J.; Poljak, N.; Porter, J.; Poskanzer, A. M.; Pruthi, N. K.; Przybycien, M.; Pujahari, P. R.; Putschke, J.; Qiu, H.; Quintero, A.; Ramachandran, S.; Raniwala, R.; Raniwala, S.; Ray, R. L.; Riley, C. K.; Ritter, H. G.; Roberts, J. B.; Rogachevskiy, O. V.; Romero, J. L.; Ross, J. F.; Roy, A.; Ruan, L.; Rusnak, J.; Rusnakova, O.; Sahoo, N. R.; Sahu, P. K.; Sakrejda, I.; Salur, S.; Sandweiss, J.; Sangaline, E.; Sarkar, A.; Schambach, J.; Scharenberg, R. P.; Schmah, A. M.; Schmidke, W. B.; Schmitz, N.; Seger, J.; Seyboth, P.; Shah, N.; Shahaliev, E.; Shanmuganathan, P. V.; Shao, M.; Sharma, B.; Shen, W. Q.; Shi, S. S.; Shou, Q. Y.; Sichtermann, E. P.; Singaraju, R. N.; Skoby, M. J.; Smirnov, D.; Smirnov, N.; Solanki, D.; Sorensen, P.; Spinka, H. M.; Srivastava, B.; Stanislaus, T. D. S.; Stevens, J. R.; Stock, R.; Strikhanov, M.; Stringfellow, B.; Sumbera, M.; Sun, X.; Sun, X. M.; Sun, Y.; Sun, Z.; Surrow, B.; Svirida, D. N.; Symons, T. J. M.; Szelezniak, M. A.; Takahashi, J.; Tang, A. H.; Tang, Z.; Tarnowsky, T.; Thomas, J. H.; Timmins, A. R.; Tlusty, D.; Tokarev, M.; Trentalange, S.; Tribble, R. E.; Tribedy, P.; Trzeciak, B. A.; Tsai, O. D.; Turnau, J.; Ullrich, T.; Underwood, D. G.; Van Buren, G.; van Nieuwenhuizen, G.; Vandenbroucke, M.; Vanfossen, J. A.; Varma, R.; Vasconcelos, G. M. S.; Vasiliev, A. N.; Vertesi, R.; Videbæk, F.; Viyogi, Y. P.; Vokal, S.; Vossen, A.; Wada, M.; Wang, F.; Wang, G.; Wang, H.; Wang, J. S.; Wang, X. L.; Wang, Y.; Wang, Y.; Webb, G.; Webb, J. C.; Westfall, G. D.; Wieman, H.; Wissink, S. W.; Witt, R.; Wu, Y. F.; Xiao, Z.; Xie, W.; Xin, K.; Xu, H.; Xu, J.; Xu, N.; Xu, Q. H.; Xu, Y.; Xu, Z.; Yan, W.; Yang, C.; Yang, Y.; Yang, Y.; Ye, Z.; Yepes, P.; Yi, L.; Yip, K.; Yoo, I.-K.; Yu, N.; Zawisza, Y.; Zbroszczyk, H.; Zha, W.; Zhang, J. B.; Zhang, J. L.; Zhang, S.; Zhang, X. P.; Zhang, Y.; Zhang, Z. P.; Zhao, F.; Zhao, J.; Zhong, C.; Zhu, X.; Zhu, Y. H.; Zoulkarneeva, Y.; Zyzak, M.; STAR Collaboration

    2014-03-01

    Azimuthal angular correlations of charged hadrons with respect to the axis of a reconstructed (trigger) jet in Au +Au and p +p collisions at √sNN =200 GeV in STAR are presented. The trigger jet population in Au +Au collisions is biased toward jets that have not interacted with the medium, allowing easier matching of jet energies between Au +Au and p +p collisions while enhancing medium effects on the recoil jet. The associated hadron yield of the recoil jet is significantly suppressed at high transverse momentum (pTassoc) and enhanced at low pTassoc in 0%-20% central Au +Au collisions compared to p +p collisions, which is indicative of medium-induced parton energy loss in ultrarelativistic heavy-ion collisions.

  19. Anomalous Hall effect in Fe/Au multilayers

    KAUST Repository

    Zhang, Q.

    2016-07-22

    To understand the interfacial scattering effect on the anomalous Hall effect (AHE), we prepared multilayers of (Fe(36/n)nm/Au(12/n)nm)n using an e-beam evaporator. This structure design allowed us to investigate the effect of interfacial scattering on the AHE, while keeping the samples\\' thickness and composition unchanged. We measured the (magneto)transport properties of the samples in a wide temperature range (10–310 K) with magnetic fields up to 50 kOe. We found that the scaling between the anomalous Hall resistivity (ρAHE) and longitudinal resistivity (ρxx) can be roughly described by ρAHE∼ργxx with γ=2.65±0.10 and 1.90 ± 0.04 for samples from n=1 to n=4 and samples from n=4 to n=12, respectively. Our quantitative analysis results showed that the interfacial scattering suppresses the contribution of the intrinsic mechanism and gives rise to a side-jump contribution.

  20. Characterization and Modeling I(V of the Gate Schottky Structures HEMTs Ni/Au/AlInN/GaN

    Directory of Open Access Journals (Sweden)

    N. Benyahya

    2014-05-01

    Full Text Available In this paper, we have studied the Schottky contact of Ni/Au/AlInN/GaN HEMTs. The current–voltage Igs (Vgs of Ni/Au/AlInN/GaN structures were investigated at room temperature. The electrical parameters such as ideality factor (2.3, barrier height (0.72 eV and series resistance (33 W were evaluated from I(V data, the threshold voltage (-2.42 V, the 2D gas density (1.35 ´ 1013 cm-2 and barrier height (0.94 eV were evaluated from C(V data.

  1. The characteristics and performance of electroless nickel and immersion Au plated aluminum alloy bipolar plates in polymer electrolyte membrane fuel cells

    Science.gov (United States)

    Tsai, Sung-Ying; Bai, Ching-Yuan; Lin, Chien-Hung; Shi, Gia-Nan; Hou, Kung-Hsu; Liu, Yih-Ming; Ger, Ming-Der

    2012-09-01

    Cheap, lightweight, and malleable Al-alloy 5052 is suggested as alternative materials of graphite bipolar plates (BPPs) in proton exchange membrane fuel cells (PEMFCs). This work presents the first research in producing Au/Ni-P multilayer coatings on Al-alloy BPPs using an electroless Ni-P along with immersion gold techniques. The modified Al-alloy BPPs are investigated to evaluate the coating structure, corrosion resistance, interfacial contact resistance, electrochemical impedance of single cells, and single cell performance. The results indicate that the Al-alloy BPPs with Au/Ni-P coatings, in which Ni-P is prepared at pH 4.5, reveal the lowest contact resistance and the best corrosion resistance (Icorr = 8.43 × 10-6 A cm-2) in a 0.5 M H2SO4 + 2 ppm HF solution among all of the modified specimens. The electrochemical impedance of the Au/Ni-P coating after long-term operation is 9.1 mΩ. In addition, the power density of the single cells assembled with the Au/Ni-P/Al-alloy BPPs is 0.84 W cm-2 measured at a cell voltage of 0.7 V, comparable to that with graphite BPPs (0.80 W cm-2), in the test conditions of this study. We find that the Au/Ni-P multilayer coating is very appropriate for modifying Al-ally BPPs in PEMFC systems.

  2. In-situ STM study of phosphate adsorption on Cu(111), Au(111) and Cu/Au(111) electrodes

    DEFF Research Database (Denmark)

    Schlaup, Christian; Horch, Sebastian

    2013-01-01

    The interaction of Cu(111), Au(111) and Cu-covered Au(111) electrodes with a neutral phosphate buffer solution has been studied by means of cyclic voltammetry (CV) and in situ electrochemical scanning tunneling microscopy (EC-STM). Under low potential conditions, both the Cu(111) and the Au(111...

  3. Di-hadron correlations with identified leading hadrons in 200 GeV Au + Au and d + Au collisions at STAR

    Energy Technology Data Exchange (ETDEWEB)

    Adamczyk, L; Adkins, JK; Agakishiev, G; Aggarwal, MM; Ahammed, Z; Alekseev, I; Aparin, A; Arkhipkin, D; Aschenauer, EC; Averichev, GS; Bai, X; Bairathi, V; Banerjee, A; Bellwied, R; Bhasin, A; Bhati, AK; Bhattarai, P; Bielcik, J; Bielcikova, J; Bland, LC; Bordyuzhin, IG; Bouchet, J; Brandenburg, D; Brandin, AV; Bunzarov, I; Butterworth, J; Caines, H; Calderón de la Barca Sánchez, M; Campbell, JM; Cebra, D; Cervantes, MC; Chakaberia, I; Chaloupka, P; Chang, Z; Chattopadhyay, S; Chen, X; Chen, JH; Cheng, J; Cherney, M; Christie, W; Contin, G; Crawford, HJ; Das, S; De Silva, LC; Debbe, RR; Dedovich, TG; Deng, J; Derevschikov, AA; di Ruzza, B; Didenko, L; Dilks, C; Dong, X; Drachenberg, JL; Draper, JE; Du, CM; Dunkelberger, LE; Dunlop, JC; Efimov, LG; Engelage, J; Eppley, G; Esha, R; Evdokimov, O; Eyser, O; Fatemi, R; Fazio, S; Federic, P; Fedorisin, J; Feng, Z; Filip, P; Fisyak, Y; Flores, CE; Fulek, L; Gagliardi, CA; Garand, D; Geurts, F; Gibson, A; Girard, M; Greiner, L; Grosnick, D; Gunarathne, DS; Guo, Y; Gupta, S; Gupta, A; Guryn, W; Hamad, A; Hamed, A; Haque, R; Harris, JW; He, L; Heppelmann, S; Heppelmann, S; Hirsch, A; Hoffmann, GW; Hofman, DJ; Horvat, S; Huang, T; Huang, B; Huang, HZ; Huang, X; Huck, P

    2015-10-23

    The STAR Collaboration presents for the first time two-dimensional di-hadron correlations with identified leading hadrons in 200 GeV central Au + Au and minimum-bias d + Au collisions to explore hadronization mechanisms in the quark gluon plasma. The enhancement of the jet-like yield for leading pions in Au + Au data with respect to the d + Au reference and the absence of such an enhancement for leading non-pions (protons and kaons) are discussed within the context of a quark recombination scenario. The correlated yield at large angles, specifically in the ridge region, is found to be significantly higher for leading non-pions than pions. The consistencies of the constituent quark scaling, azimuthal harmonic model and a mini-jet modification model description of the data are tested, providing further constraints on hadronization.

  4. Di-hadron correlations with identified leading hadrons in 200 GeV Au+Au and d+Au collisions at STAR

    Directory of Open Access Journals (Sweden)

    L. Adamczyk

    2015-12-01

    Full Text Available The STAR Collaboration presents for the first time two-dimensional di-hadron correlations with identified leading hadrons in 200 GeV central Au+Au and minimum-bias d+Au collisions to explore hadronization mechanisms in the quark gluon plasma. The enhancement of the jet-like yield for leading pions in Au+Au data with respect to the d+Au reference and the absence of such an enhancement for leading non-pions (protons and kaons are discussed within the context of a quark recombination scenario. The correlated yield at large angles, specifically in the ridge region, is found to be significantly higher for leading non-pions than pions. The consistencies of the constituent quark scaling, azimuthal harmonic model and a mini-jet modification model description of the data are tested, providing further constraints on hadronization.

  5. Di-hadron correlations with identified leading hadrons in 200 GeV Au + Au and d + Au collisions at STAR

    Science.gov (United States)

    Adamczyk, L.; Adkins, J. K.; Agakishiev, G.; Aggarwal, M. M.; Ahammed, Z.; Alekseev, I.; Aparin, A.; Arkhipkin, D.; Aschenauer, E. C.; Averichev, G. S.; Bai, X.; Bairathi, V.; Banerjee, A.; Bellwied, R.; Bhasin, A.; Bhati, A. K.; Bhattarai, P.; Bielcik, J.; Bielcikova, J.; Bland, L. C.; Bordyuzhin, I. G.; Bouchet, J.; Brandenburg, D.; Brandin, A. V.; Bunzarov, I.; Butterworth, J.; Caines, H.; Calderón de la Barca Sánchez, M.; Campbell, J. M.; Cebra, D.; Cervantes, M. C.; Chakaberia, I.; Chaloupka, P.; Chang, Z.; Chattopadhyay, S.; Chen, X.; Chen, J. H.; Cheng, J.; Cherney, M.; Christie, W.; Contin, G.; Crawford, H. J.; Das, S.; De Silva, L. C.; Debbe, R. R.; Dedovich, T. G.; Deng, J.; Derevschikov, A. A.; di Ruzza, B.; Didenko, L.; Dilks, C.; Dong, X.; Drachenberg, J. L.; Draper, J. E.; Du, C. M.; Dunkelberger, L. E.; Dunlop, J. C.; Efimov, L. G.; Engelage, J.; Eppley, G.; Esha, R.; Evdokimov, O.; Eyser, O.; Fatemi, R.; Fazio, S.; Federic, P.; Fedorisin, J.; Feng, Z.; Filip, P.; Fisyak, Y.; Flores, C. E.; Fulek, L.; Gagliardi, C. A.; Garand, D.; Geurts, F.; Gibson, A.; Girard, M.; Greiner, L.; Grosnick, D.; Gunarathne, D. S.; Guo, Y.; Gupta, S.; Gupta, A.; Guryn, W.; Hamad, A.; Hamed, A.; Haque, R.; Harris, J. W.; He, L.; Heppelmann, S.; Heppelmann, S.; Hirsch, A.; Hoffmann, G. W.; Hofman, D. J.; Horvat, S.; Huang, T.; Huang, B.; Huang, H. Z.; Huang, X.; Huck, P.; Humanic, T. J.; Igo, G.; Jacobs, W. W.; Jang, H.; Jia, J.; Jiang, K.; Judd, E. G.; Kabana, S.; Kalinkin, D.; Kang, K.; Kauder, K.; Ke, H. W.; Keane, D.; Kechechyan, A.; Khan, Z. H.; Kikoła, D. P.; Kisiel, A.; Kochenda, L.; Koetke, D. D.; Kosarzewski, L. K.; Kraishan, A. F.; Kravtsov, P.; Krueger, K.; Kumar, L.; Lamont, M. A. C.; Landgraf, J. M.; Landry, K. D.; Lauret, J.; Lebedev, A.; Lednicky, R.; Lee, J. H.; Li, X.; Li, W.; Li, Z. M.; Li, Y.; Li, C.; Li, X.; Lisa, M. A.; Liu, F.; Ljubicic, T.; Llope, W. J.; Lomnitz, M.; Longacre, R. S.; Luo, X.; Ma, G. L.; Ma, Y. G.; Ma, R.; Ma, L.; Magdy, N.; Majka, R.; Manion, A.; Margetis, S.; Markert, C.; Masui, H.; Matis, H. S.; McDonald, D.; Meehan, K.; Mei, J. C.; Minaev, N. G.; Mioduszewski, S.; Mishra, D.; Mohanty, B.; Mondal, M. M.; Morozov, D. A.; Mustafa, M. K.; Nandi, B. K.; Nasim, Md.; Nayak, T. K.; Nigmatkulov, G.; Niida, T.; Nogach, L. V.; Noh, S. Y.; Novak, J.; Nurushev, S. B.; Odyniec, G.; Ogawa, A.; Oh, K.; Okorokov, V.; Olvitt, D.; Page, B. S.; Pak, R.; Pan, Y. X.; Pandit, Y.; Panebratsev, Y.; Pawlik, B.; Pei, H.; Perkins, C.; Peterson, A.; Pile, P.; Pluta, J.; Poniatowska, K.; Porter, J.; Posik, M.; Poskanzer, A. M.; Pruthi, N. K.; Putschke, J.; Qiu, H.; Quintero, A.; Ramachandran, S.; Raniwala, R.; Raniwala, S.; Ray, R. L.; Ritter, H. G.; Roberts, J. B.; Rogachevskiy, O. V.; Romero, J. L.; Roy, A.; Ruan, L.; Rusnak, J.; Rusnakova, O.; Sahoo, N. R.; Sahu, P. K.; Sakrejda, I.; Salur, S.; Sandweiss, J.; Sarkar, A.; Schambach, J.; Scharenberg, R. P.; Schmah, A. M.; Schmidke, W. B.; Schmitz, N.; Seger, J.; Seyboth, P.; Shah, N.; Shahaliev, E.; Shanmuganathan, P. V.; Shao, M.; Sharma, B.; Sharma, M. K.; Shen, W. Q.; Shi, S. S.; Shou, Q. Y.; Sichtermann, E. P.; Sikora, R.; Simko, M.; Singha, S.; Skoby, M. J.; Smirnov, N.; Smirnov, D.; Song, L.; Sorensen, P.; Spinka, H. M.; Srivastava, B.; Stanislaus, T. D. S.; Stepanov, M.; Strikhanov, M.; Stringfellow, B.; Sumbera, M.; Summa, B.; Sun, Y.; Sun, Z.; Sun, X. M.; Sun, X.; Surrow, B.; Svirida, D. N.; Szelezniak, M. A.; Tang, A. H.; Tang, Z.; Tarnowsky, T.; Tawfik, A.; Thomas, J. H.; Timmins, A. R.; Tlusty, D.; Todoroki, T.; Tokarev, M.; Trentalange, S.; Tribble, R. E.; Tribedy, P.; Tripathy, S. K.; Tsai, O. D.; Ullrich, T.; Underwood, D. G.; Upsal, I.; Van Buren, G.; van Nieuwenhuizen, G.; Vandenbroucke, M.; Varma, R.; Vasiliev, A. N.; Vertesi, R.; Videbæk, F.; Viyogi, Y. P.; Vokal, S.; Voloshin, S. A.; Vossen, A.; Wang, J. S.; Wang, F.; Wang, H.; Wang, G.; Wang, Y.; Wang, Y.; Webb, G.; Webb, J. C.; Wen, L.; Westfall, G. D.; Wieman, H.; Wissink, S. W.; Witt, R.; Wu, Y. F.; Wu; Xiao, Z. G.; Xie, W.; Xin, K.; Xu, H.; Xu, Z.; Xu, Q. H.; Xu, Y. F.; Xu, N.; Yang, S.; Yang, Y.; Yang, Q.; Yang, Y.; Yang, C.; Yang, Y.; Ye, Z.; Ye, Z.; Yepes, P.; Yi, L.; Yip, K.; Yoo, I.-K.; Yu, N.; Zbroszczyk, H.; Zha, W.; Zhang, Y.; Zhang, Z.; Zhang, J. B.; Zhang, J.; Zhang, X. P.; Zhang, S.; Zhang, J.; Zhao, J.; Zhong, C.; Zhou, L.; Zhu, X.; Zoulkarneeva, Y.

    2015-12-01

    The STAR Collaboration presents for the first time two-dimensional di-hadron correlations with identified leading hadrons in 200 GeV central Au + Au and minimum-bias d + Au collisions to explore hadronization mechanisms in the quark gluon plasma. The enhancement of the jet-like yield for leading pions in Au + Au data with respect to the d + Au reference and the absence of such an enhancement for leading non-pions (protons and kaons) are discussed within the context of a quark recombination scenario. The correlated yield at large angles, specifically in the ridge region, is found to be significantly higher for leading non-pions than pions. The consistencies of the constituent quark scaling, azimuthal harmonic model and a mini-jet modification model description of the data are tested, providing further constraints on hadronization.

  6. On Ni/Au Alloyed Contacts to Mg-Doped GaN

    Science.gov (United States)

    Sarkar, Biplab; Reddy, Pramod; Klump, Andrew; Kaess, Felix; Rounds, Robert; Kirste, Ronny; Mita, Seiji; Kohn, Erhard; Collazo, Ramon; Sitar, Zlatko

    2018-01-01

    Ni/Au contacts to p-GaN were studied as a function of free hole concentration in GaN using planar transmission line measurement structures. All contacts showed a nonlinear behavior, which became stronger for lower doping concentrations. Electrical and structural analysis indicated that the current conduction between the contact and the p-GaN was through localized nano-sized clusters. Thus, the non-linear contact behavior can be well explained using the alloyed contact model. Two contributions to the contact resistance were identified: the spreading resistance in the semiconductor developed by the current crowding around the electrically active clusters, and diode-type behavior at the interface of the electrically active clusters with the semiconductor. Hence, the equivalent Ni/Au contact model consists of a diode and a resistor in series for each active cluster. The reduced barrier height observed in the measurements is thought to be generated by the extraction of Ga from the crystalline surface and localized formation of the Au:Ga phase. The alloyed contact analyses presented in this work are in good agreement with some of the commonly observed behavior of similar contacts described in the literature.

  7. "Dealloying" Phase Separation during Growth of Au on Ni(110)

    DEFF Research Database (Denmark)

    Nielsen, L. Pleth; Besenbacher, Flemming; Stensgaard, I.

    1995-01-01

    Combined scanning tunneling microscopy and ion-scattering studies have revealed a new "dealloying" phase transition during the growth of Au on Ni(110). The Au atoms, which initially alloy into the Ni(110) surface, phase separate into a vacancy-stabilized Au dimer-trimer chain structure at Au...... coverages larger than 0.4 monolayer. Using the effective-medium theory, we show that the resulting structure as well as the physical mechanism responsible for the phase transition are closely related to the surface stress induced by the substituted Au....

  8. [Hyp-Au-Sn9(Hyp)3-Au-Sn9(Hyp)3-Au-Hyp]-: the longest intermetalloid chain compound of tin.

    Science.gov (United States)

    Binder, Mareike; Schrenk, Claudio; Block, Theresa; Pöttgen, Rainer; Schnepf, Andreas

    2017-10-12

    The reaction of the metalloid tin cluster [Sn 10 (Hyp) 4 ] 2- with (Ph 3 P)Au-SHyp (Hyp = Si(SiMe 3 ) 3 ) gave an intermetalloid cluster [Au 3 Sn 18 (Hyp) 8 ] - 1, which is the longest intermetalloid chain compound of tin to date. 1 shows a structural resemblance to binary AuSn phases, which is expected for intermetalloid clusters.

  9. Au Based Nanocomposites Towards Plasmonic Applications

    Science.gov (United States)

    Panniello, A.; Curri, M. L.; Placido, T.; Reboud, V.; Kehagias, N.; Sotomayor Torres, C. M.; Mecerreyes, D.; Agostiano, A.; Striccoli, M.

    2010-06-01

    Incorporation of nano-sized metals in polymers can transfer their unique features to the host matrix, providing nanocomposite materials with improved optical, electric, magnetic and mechanical properties. In this work, colloidal Au nanorods have been incorporated into PMMA based random co-polymer, properly functionalized with amino groups and the optical and morphological properties of the resulting nanocomposite have been investigated by spectroscopic and AFM measurements. Au nanorods have demonstrated to preserve the plasmon absorption and to retain morphological features upon the incorporation, thus making the final metal modified polymer composite exploitable for the fabrication of plasmonic devices. The prepared nanocomposites have been then patterned by Nano Imprint Lithography technique in order to demonstrate the viability of the materials towards optical applications.

  10. Sens au travail et management du travail

    OpenAIRE

    Frémeaux, Sandrine

    2014-01-01

    Se définissant comme une activité qui a un but (Brief et Nord, 1990), le travail répond au besoin humain de donner sens (Maslow, 1964). D’un côté, les sujets cherchent davantage aujourd’hui à donner sens à leur travail (Clot, 2008), celui-ci devenant l’objet d’une demande nouvelle de réalisation de soi. D’un autre côté, les entreprises tendent à se focaliser sur les évolutions externes liées à la financiarisation de l’économie et à la mondialisation et à perdre de vue le sens au travail. Et m...

  11. Anomalies hematologiques au cours des accidents vasculaires ...

    African Journals Online (AJOL)

    Introduction: En Côte d'Ivoire, les accidents vasculaires cérébraux (AVC) sont de plus en plus fréquents. Les anomalies biochimiques sont décrites au cours de ces pathologies. Cependant une composante hématologique est de plus en plus évoquée. L'objectif de cette étude a été de rapporter les anomalies ...

  12. Le CRDI au Népal

    International Development Research Centre (IDRC) Digital Library (Canada)

    Les chercheurs ont aidé les agriculteurs de Kulekhani à adopter la pisciculture en cage. CRDI. Centre De reCherChes pour le Développement internAtionAl. Le CRDI au Népal. Grâce à l'appui du CRDI. □ les collectivités s'adaptent aux changements climatiques. □ les agriculteurs de l'Himalaya améliorent leurs moyens.

  13. La cardiomyopathie dilatee au centre hospitalier Universitaire ...

    African Journals Online (AJOL)

    But : Afin d'améliorer la prise en charge, d'éviter l'évolution rapide vers une insuffisance cardiaque réfractaire au traitement, nous avons entrepris cette étude en milieu hospitalier. Méthode : il s'est agi d'une étude rétrospective et descriptive dans le service de cardiologie du Centre Hospitalier Universitaire Tokoin de Lomé.

  14. Synthesis of Pd-Au bimetallic nanocrystals via controlled overgrowth.

    Science.gov (United States)

    Lim, Byungkwon; Kobayashi, Hirokazu; Yu, Taekyung; Wang, Jinguo; Kim, Moon J; Li, Zhi-Yuan; Rycenga, Matthew; Xia, Younan

    2010-03-03

    This paper describes the synthesis of Pd-Au bimetallic nanocrystals with controlled morphologies via a one-step seeded-growth method. Two different reducing agents, namely, L-ascorbic acid and citric acid, were utilized for the reduction of HAuCl(4) in an aqueous solution to control the overgrowth of Au on cubic Pd seeds. When L-ascorbic acid was used as the reducing agent, conformal overgrowth of Au on the Pd nanocubes led to the formation of Pd-Au nanocrystals with a core-shell structure. On the contrary, localized overgrowth of Au was observed when citric acid was used as the reducing agent, producing Pd-Au bimetallic dimers. Through this morphological control, we were able to tune the localized surface plasmon resonance peaks of Pd-Au bimetallic nanostructures in the visible region.

  15. Near-infrared-responsive, superparamagnetic Au@Co nanochains

    Directory of Open Access Journals (Sweden)

    Varadee Vittur

    2017-08-01

    Full Text Available This manuscript describes a new type of nanomaterial, namely superparamagnetic Au@Co nanochains with optical extinctions in the near infrared (NIR. The Au@Co nanochains were synthesized via a one-pot galvanic replacement route involving a redox-transmetalation process in aqueous medium, where Au salt was reduced to form Au shells on Co seed templates, affording hollow Au@Co nanochains. The Au shells serve not only as a protective coating for the Co nanochain cores, but also to give rise to the optical properties of these unique nanostructures. Importantly, these bifunctional, magneto-optical Au@Co nanochains combine the advantages of nanophotonics (extinction at ca. 900 nm and nanomagnetism (superparamagnetism and provide a potentially useful new nanoarchitecture for biomedical or catalytic applications that can benefit from both activation by light and manipulation using an external magnetic field.

  16. Au-nanoparticles grafted on plasma treated PE

    International Nuclear Information System (INIS)

    Svorcik, V.; Chaloupka, A.; Rezanka, P.; Slepicka, P.; Kolska, Z.; Kasalkova, N.; Hubacek, T.; Siegel, J.

    2010-01-01

    Polyethylene (PE) surface was treated with Ar plasma. Activated surface was grafted from methanol solution of 1,2-ethanedithiol. Then the sample was immersed into freshly prepared colloid solution of Au-nanoparticles. Finally Au layer was sputtered on the samples. Properties of the modified PE were studied using various methods: AFM, EPR, RBS and nanoindentation. It was shown that the plasma treatment results in degradation of polymer chain (AFM) and creation of free radicals by EPR. After grafting with dithiol, the concentration of free radicals declines. The presence of Au and S in the surface layer after the coating with Au-nanoparticles was proved by RBS. Plasma treatment changes PE surface morphology and increases surface roughness, too. Another significant change in surface morphology and roughness was observed after deposition of Au-nanoparticles. Nanoindentation measurements show that the grafting with Au-nanoparticles increases adhesion of subsequently sputtered Au layer.

  17. Tuning the collective switching behavior of azobenzene/Au hybrid materials: flexible versus rigid azobenzene backbones and Au(111) surfaces versus curved Au nanoparticles.

    Science.gov (United States)

    Liu, Chunyan; Zheng, Dong; Hu, Weigang; Zhu, Qiang; Tian, Ziqi; Zhao, Jun; Zhu, Yan; Ma, Jing

    2017-11-09

    The combination of photo-responsive azobenzene (AB) and biocompatible Au nanomaterials possesses potential applications in diverse fields such as biosensing and thermotherapy. To explore the influence of azobenzene moieties and Au substrates on the collective switching behavior, two different azobenzene derivatives (rigid biphenyl-controlled versus flexible alkoxyl chain-linked) and three different Au substrates (a planar Au(111) surface, curved Au 102 (SR) 44 and Au 25 (SR) 18 clusters) were chosen to form six Au@AB combinations. A reactive molecular dynamics (RMD) model considering both the torsion and inversion path was implemented to simulate the collective photo-induced cis-to-trans switching process of AB monolayers on Au substrates. The major driving force for isomerization is demonstrated to be the torsion of the C-N[double bond, length as m-dash]N-C dihedral angle, in addition to the minor contribution from an inversion pathway. The isomerization process can be divided into the preliminary conformation switching stage and the later relaxation stage, in which a gradual self-organization is observed for 40 ps. The Au substrate affects the packing structure of the AB monolayer, while the choice of different kinds of ABs tunes the intermolecular interaction in the monolayer. Flexible alkoxyl-linked F-AB may achieve much faster conversion on Au clusters than on the surface. For rigid biphenyl-based R-AB anchored on Au nanoparticles (AuNPs), a competitive torsion between the biphenyl and C-N[double bond, length as m-dash]N-C dihedral may delay the C-N[double bond, length as m-dash]N-C dihedral torsion and the following isomerization process. After the R-AB molecules were anchored on the Au(111) surface, the strong π-π stacking between biphenyl units accelerates the collective isomerization process. A curvature-dependent effect is observed for R-AB SAMs on different-sized substrates. The cooperation between functional AB monolayers and the Au substrate

  18. Molecular dynamics simulation of joining process of Ag-Au nanowires and mechanical properties of the hybrid nanojoint

    Directory of Open Access Journals (Sweden)

    Su Ding

    2015-05-01

    Full Text Available The nanojoining process of Ag-Au hybrid nanowires at 800K was comprehensively studied by virtue of molecular dynamics (MD simulation. Three kinds of configurations including end-to-end, T-like and X-like were built in the simulation aiming to understand the nanojoining mechanism. The detailed dynamic evolution of atoms, crystal structure transformation and defects development during the nanojoining processes were performed. The results indicate that there are two stages in the nanojoining process of Ag-Au nanowires which are atom diffusion and new bonds formation. Temperature is a key parameter affecting both stages ascribed to the energy supply and the optimum temperature for Ag-Au nanojoint with diameter of 4.08 nm has been discussed. The mechanical properties of the nanojoint were examined with simulation of tensile test on the end-to-end joint. It was revealed that the nanojoint was strong enough to resist fracture at the joining area.

  19. MoO3–Au composite interfacial layer for high efficiency and air-stable organic solar cells

    DEFF Research Database (Denmark)

    Pan, Hongbin; Zuo, Lijian; Fu, Weifei

    2013-01-01

    Efficient and stable polymer bulk-heterojunction solar cells based on regioregular poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester (P3HT:PC61BM) blend active layer have been fabricated with a MoO3–Au co-evaporation composite film as the anode interfacial layer (AIL). The optical...... resistance and thus improving the fill factor and efficiency of the devices. Additionally, the air stability of devices with different AILs (MoO3–Au composite, MoO3 and PEDOT:PSS) were studied and it was found that the MoO3–Au composite layer remarkably improved the stability of the solar cells with shelf...

  20. Cathode-Control Alloying at an Au-ZnSe Nanowire Contact via in Situ Joule Heating

    International Nuclear Information System (INIS)

    Zeng Ya-Ping; Qu Bai-Hua; Yu Hong-Chun; Wang Yan-Guo

    2012-01-01

    Controllable interfacial alloying is achieved at a Au-ZnSe nanowire (M-S) contact via in situ Joule heating inside transmission electron microscopy (TEM). TEM inspection reveals that the Au electrode is locally molten at the M-S contact and the tip of the ZnSe nanowire is covered by the Au melting. Experimental evidences confirm that the alloying at the reversely biased M-S contact is due to the high resistance of the Schottky barrier at this M-S contact, coincident to cathode-control mode. Consequently, in situ Joule heating can be an effective method to improve the performance of nanoelectronics based on a metal-semiconductor-metal nanostructure. (cross-disciplinary physics and related areas of science and technology)

  1. Resistance-resistant antibiotics.

    Science.gov (United States)

    Oldfield, Eric; Feng, Xinxin

    2014-12-01

    New antibiotics are needed because drug resistance is increasing while the introduction of new antibiotics is decreasing. We discuss here six possible approaches to develop 'resistance-resistant' antibiotics. First, multitarget inhibitors in which a single compound inhibits more than one target may be easier to develop than conventional combination therapies with two new drugs. Second, inhibiting multiple targets in the same metabolic pathway is expected to be an effective strategy owing to synergy. Third, discovering multiple-target inhibitors should be possible by using sequential virtual screening. Fourth, repurposing existing drugs can lead to combinations of multitarget therapeutics. Fifth, targets need not be proteins. Sixth, inhibiting virulence factor formation and boosting innate immunity may also lead to decreased susceptibility to resistance. Although it is not possible to eliminate resistance, the approaches reviewed here offer several possibilities for reducing the effects of mutations and, in some cases, suggest that sensitivity to existing antibiotics may be restored in otherwise drug-resistant organisms. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. Functionalized Au@Ag-Au nanoparticles as an optical and SERS dual probe for lateral flow sensing.

    Science.gov (United States)

    Bai, Tingting; Wang, Meng; Cao, Min; Zhang, Juan; Zhang, Kangzhen; Zhou, Ping; Liu, Zhengxia; Liu, Ying; Guo, Zhirui; Lu, Xiang

    2018-02-14

    Lateral flow assay strips (LFASs) with Au nanoparticles (NPs) have been widely used as a probe for biomarkers in point-of-care testing; however, there still remain challenges in detection sensitivity and quantitative analysis. In this study, we developed a surface-enhanced Raman scattering (SERS)-based LFAS for quantitative analysis of a biomarker in the low concentration range. Moreover, apart from conventional Au NPs, three other types of citrate-capped Au-Ag bimetallic NPs: Au core with Ag shell NPs (Au@Ag NPs), rattle-like Au core in Ag-Au shell NPs (Au@Ag-Au NPs) and Ag-Au NPs were prepared and functionalized, and their solution-based SERS activities were comprehensively studied by experimental measurement and theoretical analysis. The results clearly indicated that the citrate-capped Au@Ag-Au NPs exhibited the highest SERS activity among the probes tested. Au@Ag-Au NPs were used as both optical and SERS probes in a SERS-based LFAS. In the presence of the analyte at high concentrations, a purple color appeared in the test zone. Highly sensitive and quantitative analysis was realized by measurement of SERS signals from the test lines. One of the most specific markers for cardiac injury, cardiac troponin I (cTnI), was chosen as the detection model. The detection limit of the SERS-based LFAS for cardiac troponin I was 0.09 ng/mL, lowered by nearly 50 times compared with visual results, and could be further lowered by optimization. These results demonstrated that the SERS-based LFAS using citrate-capped Au@Ag-Au NPs as probes can be a powerful tool for highly sensitive and quantitative detection of biomarkers. Graphical abstract A surface-enhanced Raman scattering (SERS)-based lateral flow assay strip using rattle-like Au core in Ag-Au shell (Au@Ag-Au) nanoparticles as probes was developed for quantitative analysis of a biomarker, with a detection limit nearly 50 times lower than that of visual assessment. C control line, T test line.

  3. A photoresponsive Au25 nanocluster protected by azobenzene derivative thiolates

    Science.gov (United States)

    Negishi, Yuichi; Kamimura, Ukyo; Ide, Mao; Hirayama, Michiyo

    2012-06-01

    An Au25 cluster protected by azobenzene derivative thiolates (S-Az) ([Au25(S-Az)18]-) was synthesized with the aim of producing a photoresponsive Au25 cluster. The matrix-assisted laser desorption/ionization mass spectrum of the product revealed that [Au25(S-Az)18]- was synthesized in high purity. Optical absorption spectra of [Au25(S-Az)18]- obtained before and after photoirradiation suggest that the azobenzenes in the ligands of Au25(S-Az)18 isomerize with an efficiency of nearly 100%, both from the trans to cis conformation and from the cis to trans conformation. Furthermore, the redox potential and optical absorption of Au25(S-Az)18 were found to change reversibly due to photoisomerization of azobenzenes.An Au25 cluster protected by azobenzene derivative thiolates (S-Az) ([Au25(S-Az)18]-) was synthesized with the aim of producing a photoresponsive Au25 cluster. The matrix-assisted laser desorption/ionization mass spectrum of the product revealed that [Au25(S-Az)18]- was synthesized in high purity. Optical absorption spectra of [Au25(S-Az)18]- obtained before and after photoirradiation suggest that the azobenzenes in the ligands of Au25(S-Az)18 isomerize with an efficiency of nearly 100%, both from the trans to cis conformation and from the cis to trans conformation. Furthermore, the redox potential and optical absorption of Au25(S-Az)18 were found to change reversibly due to photoisomerization of azobenzenes. Electronic supplementary information (ESI) available: Details of the experimental procedure and characterization of the products. See DOI: 10.1039/c2nr30830d

  4. Giant magnetoresistive properties of FexAu100-x alloys produced by mechanical alloying

    International Nuclear Information System (INIS)

    Socolovsky, L.M.; Sanchez, F.H.; Shingu, P.H.

    2001-01-01

    The Fe x Au 100- x alloys were produced for the first time by mechanical alloying. Resistance of samples with iron concentrations of x=15, 20, 25, and 30 at% were measured at 77 K under an applied field of 14 kOe. A maximum in magnetoresistive ratio (Δρ/ρ) of 3.5% was obtained for Fe 25 Au 75 . Samples were annealed in order to enhance magnetoresistive properties. These samples exhibit larger ratios, primarily due to the elimination of defects. X-ray diffraction Moessbauer spectroscopy and magnetoresistance measurements were performed, in order to correlate bulk and hyperfine magnetic properties with crystalline structure. X-ray diffractograms show an FCC structure, with no evidence for a BCC one

  5. Optimizing the planar structure of (1 1 1) Au/Co/Au trilayers

    International Nuclear Information System (INIS)

    Kumah, D P; Cebollada, A; Clavero, C; Garcia-MartIn, J M; Skuza, J R; Lukaszew, R A; Clarke, R

    2007-01-01

    Au/Co/Au trilayers are interesting for a range of applications which exploit their unusual optical and electronic transport behaviour in a magnetic field. Here we present a comprehensive structural and morphological study of a series of trilayers with 0-7 nm Co layer thickness fabricated on glass by ultrahigh vacuum vapour deposition. We use a combination of in situ electron diffraction, atomic force microscopy and x-ray scattering to determine the optimum deposition conditions for highly textured, flat and continuous layered structures. The 16 nm Au-on-glass buffer layer, deposited at ambient temperature, is found to develop a smooth (1 1 1) texture on annealing at 350 deg. C for 10 min. Subsequent growth of the Co layer at 150 deg. C produces a (1 1 1) textured film with lateral grain size of ∼150 nm in the 7 nm-thick Co layer. A simultaneous in-plane and out-of-plane Co lattice expansion is observed for the thinnest Co layers, converging to bulk values for the thickest films. The roughness of the Co layer is similar to that of the Au buffer layer, indicative of conformal growth. The 6 nm Au capping layer smoothens the trilayer surface, resulting in a surface roughness independent of the Co layer thickness

  6. Optimizing the planar structure of (1 1 1) Au/Co/Au trilayers

    Energy Technology Data Exchange (ETDEWEB)

    Kumah, D P [Applied Physics Program and FOCUS Center, University of Michigan, 450 Church St., Ann Arbor, MI 48109-1040 (United States); Cebollada, A [Applied Physics Program and FOCUS Center, University of Michigan, 450 Church St., Ann Arbor, MI 48109-1040 (United States); Clavero, C [Instituto de Microelectronica de Madrid-IMM (CNM-CSIC), Isaac Newton 8-PTM, 28760 Tres Cantos, Madrid (Spain); Garcia-MartIn, J M [Instituto de Microelectronica de Madrid-IMM (CNM-CSIC), Isaac Newton 8-PTM, 28760 Tres Cantos, Madrid (Spain); Skuza, J R [Physics and Astronomy Department, University of Toledo, 2801 W. Bancroft St., Mailstop 111, Toledo, OH 43606 (United States); Lukaszew, R A [Physics and Astronomy Department, University of Toledo, 2801 W. Bancroft St., Mailstop 111, Toledo, OH 43606 (United States); Clarke, R [Applied Physics Program and FOCUS Center, University of Michigan, 450 Church St., Ann Arbor, MI 48109-1040 (United States)

    2007-05-07

    Au/Co/Au trilayers are interesting for a range of applications which exploit their unusual optical and electronic transport behaviour in a magnetic field. Here we present a comprehensive structural and morphological study of a series of trilayers with 0-7 nm Co layer thickness fabricated on glass by ultrahigh vacuum vapour deposition. We use a combination of in situ electron diffraction, atomic force microscopy and x-ray scattering to determine the optimum deposition conditions for highly textured, flat and continuous layered structures. The 16 nm Au-on-glass buffer layer, deposited at ambient temperature, is found to develop a smooth (1 1 1) texture on annealing at 350 deg. C for 10 min. Subsequent growth of the Co layer at 150 deg. C produces a (1 1 1) textured film with lateral grain size of {approx}150 nm in the 7 nm-thick Co layer. A simultaneous in-plane and out-of-plane Co lattice expansion is observed for the thinnest Co layers, converging to bulk values for the thickest films. The roughness of the Co layer is similar to that of the Au buffer layer, indicative of conformal growth. The 6 nm Au capping layer smoothens the trilayer surface, resulting in a surface roughness independent of the Co layer thickness.

  7. Stability Studies of a New Design Au/Pt Thermocouple Without a Strain Relieving Coil

    Science.gov (United States)

    Jahan, Ferdouse; Ballico, Mark

    2007-12-01

    The performance of a simple, new design Au/Pt thermocouple developed by NMIA is assessed. This thermocouple is proposed as a more accurate replacement, over the temperature range from 0 to 1,000°C, for the commonly used Type R and S industrial transfer standards, in a robust form familiar to industrial calibration laboratories. Due to the significantly different thermal expansions of the Au and Pt thermoelements, reported designs of the Au/Pt thermocouple incorporate a strain-relieving coil or bridge at the thermocouple junction. As the strain relieving coil is mechanically delicate, these thermocouples are usually mounted in a protective quartz tube assembly, like a standard platinum resistance thermometer (SPRT). Although providing uncertainties at the mK level, they are more delicate than the commonly used Type R and S thermocouples. A new and simple design of the Au/Pt thermocouple was developed in which the differential thermal expansion between Au and Pt is accommodated in the thermocouple leads, facilitated by a special head design. The resulting thermocouple has the appearance and robustness of the traditional Type R and S thermocouples, while retaining stability better than 10 mK up to 961°C. Three thermocouples of this design were calibrated at fixed points and by comparison to SPRTs in a stirred salt bath. In order to assess possible impurity migration, strain effects, and mechanical robustness, sequences of heat treatment up to a total of 500 h together with over 50 thermal cycles from 900°C to ambient were performed. The effect of these treatments on the calibration was assessed, demonstrating the sensors to be robust and stable to better than 10 mK. The effects on the measured inhomogeneity of the thermocouple were assessed using the NMIA thermocouple scanning bath.

  8. [Studies on Au-Ag-Pd-Cu alloys. (Part 3) Effects of additional elements to Au-Ag-Pd-Cu alloys (author's transl)].

    Science.gov (United States)

    Okazaki, K

    1981-01-01

    In the previous papers, the author pointed out that alloys containing 30 wt% Au, 15-25 wt% Pd and Cu were more favourable for Au-Ag-Pd-Cu quarternary dental alloys. In this paper, the experiments were carried out to find the effects of additional elements and so, Pt, Ir, Os, W, Mo, Cr, Mn, Co, Zn, In, Sn and Si were added to 30 wt% Au-30 wt% Ag-20 wt% Pd-20 wt% Cu alloys ranging 0.1 wt% to 2.0 wt% respectively. Then, tensile strength, elongation, hardness, corrosion resistivity and porosity ratio were tested on these specimen. Results were as follows. 1) The addition of 0.2 wt% Ir, 0.2 wt% Os and 1.0 wt% Co were comparatively effective for the fineness of grain sizes, elongation and tensile strength. 2) The addition of 0.2 wt% W, 1.0 wt% Mo and 0.2 wt% Si showed respectively bad effect for porosities or mechanical properties. 3) The addition of 1.0 wt% Cr, 2.0 wt% Mn, 1.0 wt% Co, 2.0 wt% Zn and 2.0 wt% In were good for the decrease of porosities respectively and showed that the porosity ratio was lower than 0.2%. 4) The additions of 2.0 wt% Zn-1.0 wt% Pt-0.5 wt% Co to Au-Ag-Pd-Cu alloy was especially good and showed 80 kg/mm2 of tensile strength, 5.1% of elongation, 249 of Vicker's hardness number and 0.4% of porosity ratio.

  9. Efficient CH3NH3PbI3 perovskite/fullerene planar heterojunction hybrid solar cells with oxidized Ni/Au/Cu transparent electrode

    Science.gov (United States)

    Lai, Wei-Chih; Lin, Kun-Wei; Guo, Tzung-Fang; Chen, Peter; Liao, Yuan-Yu

    2018-02-01

    We demonstrated the performance of inverted CH3NH3PbI3 perovskite-based solar cells (SCs) with a thermally oxidized nickel/gold/copper (Ni/Au/Cu) trilayer transparent electrode. Oxidized Ni/Au/Cu is a high transparent layer and has less resistance than the oxidized Ni/Au layer. Like the oxidized Ni/Au layer, oxidized Ni and Cu in oxidized Ni/Au/Cu could perform as a hole transport layer of the perovskite-based SCs. It leads to improved perovskite SC performance on an open circuit voltage of 1.01 V, a short circuit current density of 14.36 mA/cm2, a fill factor of 76.7%, and a power conversion efficiency (η%) of 11.1%. The η% of perovskite SCs with oxidized Ni (10 nm)/Au (6 nm)/Cu (1 nm) improved by approximately 10% compared with that of perovskite SCs with oxidized Ni/Au.

  10. Charge transport through O-deficient Au-MgO-Au junctions

    KAUST Repository

    Fadlallah, M. M.

    2009-12-29

    Metal-oxide heterostructures have been attracting considerable attention in recent years due to various technological applications. We present results of electronic structure and transport calculations for the Au-MgO-Au (metal-insulator-metal) heterostructure based on density-functional theory and the nonequilibrium Green’s functions method. The dependence of the conductance of the heterostructure on the thickness of the MgO interlayer and the interface spacing is studied. In addition, we address the effects of O vacancies. We observe deviations from an exponentially suppressed conductance with growing interlayer thickness caused by Au-O chemical bonds. Electronic states tracing back to O vacancies can increase the conductance. Furthermore, this effect can be enhanced by enlarging the interface spacing as the vacancy induced Mg states are shifted toward the Fermi energy.

  11. Nuclear Stopping in Central Au+Au Collisions at RHIC Energies

    Directory of Open Access Journals (Sweden)

    Ying Yuan

    2014-01-01

    Full Text Available Nuclear stopping in central Au+Au collisions at relativistic heavy-ion collider (RHIC energies is studied in the framework of a cascade mode and the modified ultrarelativistic quantum molecular dynamics (UrQMD transport model. In the modified mode, the mean field potentials of both formed and “preformed” hadrons (from string fragmentation are considered. It is found that the nuclear stopping is increasingly influenced by the mean-field potentials in the projectile and target regions with the increase of the reaction energy. In the central region, the calculations of the cascade model considering the modifying factor can describe the experimental data of the PHOBOS collaboration.

  12. D and $^{3}He$ production in $\\sqrt{s}$ = 130 GeV Au + Au collisions

    CERN Document Server

    Adler, C; Allgower, C; Amonett, J; Anderson, B D; Anderson, M; Averichev, G S; Balewski, J T; Barannikova, O Yu; Barnby, L S; Baudot, J; Bekele, S; Belaga, V V; Bellwied, R; Berger, J; Bichsel, H; Bland, L C; Blyth, C O; Bonner, B E; Boucham, A; Brandin, A B; Cadman, R V; Caines, H; Calderón de la Barca-Sanchez, M; Cardenas, A; Carroll, J; Castillo, J; Castro, M; Cebra, D; Chattopadhyay, S; Chen, M L; Chen, Y; Chernenko, S P; Cherney, M; Chikanian, A; Choi, B; Christie, W; Cormier, T M; Cramer, J G; Crawford, H J; De Mello, M; Deng, W S; Derevshchikov, A A; Didenko, L; Draper, J E; Dunin, V B; Dunlop, J C; Eckardt, V; Efimov, L G; Emelianov, V; Engelage, J; Eppley, G; Erazmus, B; Fachini, P; Faine, V; Finch, E; Fisyak, Yu; Flierl, D; Foley, Kenneth J; Fu, J; Gagunashvili, N D; Gans, J; Gaudichet, L; Germain, M; Geurts, F J M; Ghazikhanian, V; Grabski, J; Grachov, O A; Greiner, D E; Grigoriev, V; Guedon, M; Guschin, E; Hallman, T J; Hardtke, D; Harris, J W; Heffner, M; Heppelmann, S; Herston, T; Hippolyte, B; Hirsch, A; Hjort, E; Hoffmann, G W; Horsley, M; Huang, H Z; Humanic, T J; Hümmler, H; Igo, G; Ishihara, A; Ivanshin, Yu I; Jacobs, P; Jacobs, W W; Janik, M; Johnson, I; Jones, P G; Judd, E; Kaneta, M; Kaplan, M; Keane, D; Kisiel, A; Klay, J L; Klein, S R; Klyachko, A A; Konstantinov, A S; Kotchenda, L; Kovalenko, A D; Krämer, M; Kravtsov, P; Krüger, K; Kuhn, C; Kulikov, A V; Kunde, G J; Kunz, C L; Kutuev, R K; Kuznetsov, A A; Lakehal-Ayat, L; Lamas-Valverde, J; Lamont, M A C; Landgraf, J M; Lange, S; Lansdell, C P; Lasiuk, B; Laue, F; Lebedev, A; LeCompte, T J; Lednicky, R; Leontiev, V M; Le Vine, M J; Li, Q; Lindenbaum, S J; Lisa, M A; Ljubicic, T; Llope, W J; Lo Curto, G; Long, H; Longacre, R S; López-Noriega, M; Love, W A; Lynn, D; Majka, R; Margetis, S; Martin, L; Marx, J; Matis, H S; Matulenko, Yu A; McShane, T S; Meissner, F; Melnik, Yu M; Meshchanin, A P; Messer, M; Miller, M L; Milosevich, Z; Minaev, N G; Mitchell, J; Moiseenko, V A; Moltz, D; Moore, C F; Morozov, V; De Moura, M M; Munhoz, M G; Mutchler, G S; Nelson, J M; Nevski, P; Nikitin, V A; Nogach, L V; Norman, B; Nurushev, S B; Odyniec, Grazyna Janina; Ogawa, A; Okorokov, V; Oldenburg, M; Oson, D; Paic, G; Pandey, S U; Panebratsev, Yu A; Panitkin, S Y; Pavlinov, A I; Pawlak, T; Perevozchikov, V; Peryt, W; Petrov, V A; Platner, E D; Pluta, J; Porile, N; Porter, J; Poskanzer, A M; Potrebenikova, E V; Prindle, D J; Pruneau, C A; Radomski, S; Rai, G; Ravel, O; Ray, R L; Razin, S V; Reichhold, D M; Reid, J G; Retière, F; Ridiger, A; Ritter, H G; Roberts, J B; Rogachevski, O V; Romero, J L; Roy, C; Russ, D; Rykov, V L; Sakrejda, I; Sandweiss, J; Saulys, A C; Savin, I; Schambach, J; Scharenberg, R P; Schmitz, N; Schröder, L S; Schüttauf, A; Schweda, K; Seger, J E; Seliverstov, D M; Seyboth, P; Shahaliev, E; Shestermanov, K E; Shimansky, S S; Shvetcov, V S; Skoro, G P; Smirnov, N; Snellings, R; Sowinski, J; Spinka, H M; Srivastava, B; Stephenson, E J; Stock, Reinhard; Stolpovsky, A; Strikhanov, M N; Stringfellow, B C; Struck, C; Suaide, A A P; Sugarbaker, E R; Suire, C; Sumbera, M; Symons, T J M; Szanto de Toledo, A; Szarwas, P; Takahashi, J; Tang, A H; Thomas, J H; Tikhomirov, V; Trainor, T A; Trentalange, S; Tokarev, M; Tonjes, M B; Trofimov, V; Tsai, O; Turner, K; Ullrich, T S; Underwood, D G; Van Buren, G; Van der Molen, A; Vanyashin, A V; Vasilevski, I M; Vasilev, A N; Vigdor, S E; Voloshin, S A; Wang, F; Ward, H; Watson, J W; Wells, R; Wenaus, T J; Westfall, G D; Whitten, C; Wieman, H H; Willson, R; Wissink, S W; Witt, R; Xu, N; Xu, Z; Yakutin, A E; Yamamoto, E; Yang, J; Yepes, P; Yokosawa, A; Yurevich, V I; Zanevsky, Yu V; Zborovský, I; Zhang, H; Zhang, W M; Zoulkarneev, R; Zubarev, A N; 10.1103/PhysRevLett.87.262301

    2001-01-01

    The first measurements of light antinucleus production in Au + Au collisions at the Relativistic Heavy-Ion Collider are reported. The observed production rates for d and /sup 3/He are much larger than in lower energy nucleus-nucleus collisions. A coalescence model analysis of the yields indicates that there is little or no increase in the antinucleon freeze-out volume compared to collisions at CERN SPS energy. These analyses also indicate that the 3He freeze-out volume is smaller than the d freeze-out volume. (22 refs).

  13. Gold nanoparticle (AuNPs) and gold nanopore (AuNPore) catalysts in organic synthesis.

    Science.gov (United States)

    Takale, Balaram S; Bao, Ming; Yamamoto, Yoshinori

    2014-04-07

    Organic synthesis using gold has gained tremendous attention in last few years, especially heterogeneous gold catalysis based on gold nanoparticles has made its place in almost all organic reactions, because of the robust and green nature of gold catalysts. In this context, gold nanopore (AuNPore) with a 3D metal framework is giving a new dimension to heterogeneous gold catalysts. Interestingly, AuNPore chemistry is proving better than gold nanoparticles based chemistry. In this review, along with recent advances, major discoveries in heterogeneous gold catalysis are discussed.

  14. Balance functions from Au+Au, d+Au, and p+p collisions at root s(NN)=200 GeV

    Czech Academy of Sciences Publication Activity Database

    Aggarwal, M. M.; Ahammed, Z.; Alakhverdyants, A. V.; Alekseev, I.; Alford, J.; Anderson, B.D.; Arkhipkin, D.; Averichev, G. S.; Balewski, J.; Barnby, L. S.; Baumgart, S.; Beavis, D.R.; Bellwied, R.; Betancourt, M.J.; Betts, R. R.; Bhasin, A.; Bhati, A.K.; Bichsel, H.; Bielčík, Jaroslav; Bielčíková, Jana; Biritz, B.; Bland, L.C.; Bonner, B.E.; Bouchet, J.; Braidot, E.; Brandin, A.V.; Bridgeman, A.; Bruna, E.; Bueltmann, S.; Bunzarov, I.; Burton, T. P.; Cai, X.Z.; Caines, H.; Sanchez, M.C.D.; Catu, O.; Cebra, D.; Cendejas, R.; Cervantes, M.C.; Chajecki, Z.; Chaloupka, Petr; Chattopadhyay, S.; Chen, H.F.; Chen, J.H.; Chen, J.Y.; Cheng, J.; Cherney, M.; Chikanian, A.; Choi, K.E.; Christie, W.; Chung, P.; Clarke, R.F.; Codrington, M.J.M.; Corliss, R.; Cramer, J. G.; Crawford, H. J.; Das, D.; Dash, S.; Leyva, A.D.; De Silva, L.C.; Debbe, R.R.; Dedovich, T. G.; Derevschikov, A.A.; de Souza, R.D.; Didenko, L.; Djawotho, P.; Dogra, S.M.; Dong, X.; Drachenberg, J.L.; Draper, J. E.; Dunlop, J.C.; Mazumdar, M.R.D.; Efimov, L.G.; Elhalhuli, E.; Elnimr, M.; Engelage, J.; Eppley, G.; Erazmus, B.; Estienne, M.; Eun, L.; Evdokimov, O.; Fachini, P.; Fatemi, R.; Fedorisin, J.; Fersch, R.G.; Filip, P.; Finch, E.; Fine, V.; Fisyak, Y.; Gagliardi, C. A.; Gangaharan, D.R.; Ganti, M. S.; Garcia-Solis, E.J.; Geromitsos, A.; Geurts, F.; Ghazikhanian, V.; Ghosh, P.; Gorbunov, Y.N.; Gordon, A.; Grebenyuk, O.; Grosnick, D.; Guertin, S.M.; Gupta, A.; Gupta, N.; Guryn, W.; Haag, B.; Hamed, A.; Han, L.X.; Harris, J.W.; Hays-Wehle, J.P.; Heinz, M.; Heppelmann, S.; Hirsch, A.; Hjort, E.; Hoffmann, A.M.; Hoffmann, G.W.; Hofman, D.J.; Horner, M.J.; Huang, B.; Huang, H.Z.; Humanic, T.J.; Huo, L.; Igo, G.; Jacobs, P.; Jacobs, W.W.; Jena, C.; Jin, F.; Jones, C.L.; Jones, P.G.; Joseph, J.; Judd, E.G.; Kabana, S.; Kajimoto, K.; Kang, K.; Kapitán, Jan; Kauder, K.; Keane, D.; Kechechyan, A.; Kettler, D.; Kikola, D.P.; Kiryluk, J.; Kisiel, A.; Klein, S.R.; Knospe, A.G.; Kocoloski, A.; Koetke, D.D.; Kollegger, T.; Konzer, J.; Koralt, I.; Koroleva, L.; Korsch, W.; Kotchenda, L.; Kushpil, Vasilij; Kravtsov, P.; Krueger, K.; Krus, M.; Kumar, L.; Kurnadi, P.; Lamont, M.A.C.; Landgraf, J.M.; LaPointe, S. (ed.); Lauret, J.; Lebedev, A.; Lednický, Richard; Lee, Ch.; Lee, J.H.; Leight, W.; LeVine, M.J.; Li, C.; Li, L.; Li, N.; Li, W.; Li, X.; Li, Y.; Li, Z.M.; Lin, G.; Lindenbaum, S.J.; Lisa, M.A.; Liu, F.; Liu, H.; Liu, J.; Ljubicic, T.; Llope, W.J.; Longacre, R.S.; Love, W.A.; Lu, Y.; Luo, X.; Ma, G.L.; Ma, Y.G.; Mahapatra, D. P.; Majka, R.; Mall, O.I.; Mangotra, L.K.; Manweiler, R.; Margetis, S.; Markert, C.; Masui, H.; Matis, H.S.; Matulenko, Yu.A.; McDonald, D.; McShane, T.S.; Meschanin, A.; Milner, R.; Minaev, N.G.; Mioduszewski, S.; Mischke, A.; Mitrovski, M.K.; Mohanty, B.; Mondal, M.M.; Morozov, B.; Morozov, D.A.; Munhoz, M. G.; Nandi, B.K.; Nattrass, C.; Nayak, T. K.; Nelson, J.M.; Netrakanti, P.K.; Ng, M.J.; Nogach, L.V.; Nurushev, S.B.; Odyniec, G.; Ogawa, A.; Okorokov, V.; Oldag, E.W.; Olson, D.; Pachr, M.; Page, B.S.; Pal, S.K.; Pandit, Y.; Panebratsev, Yu.; Pawlak, T.; Peitzmann, T.; Perevoztchikov, V.; Perkins, C.; Peryt, W.; Phatak, S.C.; Pile, P.; Planinic, M.; Ploskon, M.A.; Pluta, J.; Plyku, D.; Poljak, N.; Poskanzer, A.M.; Potukuchi, B.V.K.S.; Powell, C.B.; Prindle, D.; Pruneau, C.; Pruthi, N.K.; Pujahari, P.R.; Putschke, J.; Raniwala, R.; Raniwala, S.; Ray, R.L.; Redwine, R.; Reed, R.; Ritter, H.G.; Roberts, J.B.; Rogachevskiy, O.V.; Romero, J.L.; Rose, A.; Roy, C.; Ruan, L.; Sahoo, R.; Sakai, S.; Sakrejda, I.; Sakuma, T.; Salur, S.; Sandweiss, J.; Sangaline, E.; Schambach, J.; Scharenberg, R.P.; Schmitz, N.; Schuster, T.R.; Seele, J.; Seger, J.; Selyuzhenkov, I.; Seyboth, P.; Shahaliev, E.; Shao, M.; Sharma, M.; Shi, S.S.; Sichtermann, E.P.; Simon, F.; Singaraju, R.N.; Skoby, M.J.; Smirnov, N.; Sorensen, P.; Sowinski, J.; Spinka, H.M.; Srivastava, B.; Stanislaus, T.D.S.; Staszak, D.; Stevens, J.R.; Stock, R.; Strikhanov, M.; Stringfellow, B.; Suaide, A. A. P.; Suarez, M.C.; Subba, N.L.; Šumbera, Michal; Sun, X.M.; Sun, Y.; Sun, Z.; Surrow, B.; Svirida, D.N.; Symons, T.J.M.; de Toledo, A. S.; Takahashi, J.; Tang, A.H.; Tang, Z.; Tarini, L.H.; Tarnowsky, T.; Thein, D.; Thomas, J.H.; Tian, J.; Timmins, A.R.; Timoshenko, S.; Tlustý, David; Tokarev, M. V.; Trainor, T.A.; Tram, V.N.; Trentalange, S.; Tribble, R. E.; Tsai, O.D.; Ulery, J.; Ullrich, T.; Underwood, D.G.; Van Buren, G.; van Leeuwen, M.; van Nieuwenhuizen, G.; Vanfossen, J.A.; Varma, R.; Vasconcelos, G.M.S.; Vasiliev, A. N.; Videbaek, F.; Viyogi, Y. P.; Vokal, S.; Voloshin, S.A.; Wada, M.; Walker, M.; Wang, F.; Wang, G.; Wang, H.; Wang, J.S.; Wang, Q.; Wang, X.L.; Wang, Y.; Webb, G.; Westfall, G.D.; Whitten, C.; Wieman, H.; Wissink, S.W.; Witt, R.; Wu, Y.F.; Xie, W.; Xu, N.; Xu, Q.H.; Xu, W.; Xu, Y.; Xu, Z.; Xue, L.; Yang, Y.; Yepes, P.; Yip, K.; Yoo, I.K.; Yue, Q.; Zawisza, M.; Zbroszczyk, H.; Zhan, W.; Zhang, J.B.; Zhang, S.; Zhang, W.M.; Zhang, X.P.; Zhang, Y.; Zhang, Z.P.; Zhao, J.; Zhong, C.; Zhou, J.; Zhou, W.; Zhu, X.; Zhu, Y.H.; Zoulkarneev, R.; Zoulkarneeva, Y.

    2010-01-01

    Roč. 82, č. 2 (2010), 024905/1-024905/16 ISSN 0556-2813 Institutional research plan: CEZ:AV0Z10480505; CEZ:AV0Z10100502 Keywords : HEAVY-ION COLLISIONS * AU-AU COLLISIONS * TIME PROJECTION CHAMBER Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 3.416, year: 2010

  15. Azimuthal di-hadron correlations in d plus Au and Au plus Au collisions at root s(NN)=200 GeV measured at the STAR detector

    Czech Academy of Sciences Publication Activity Database

    Aggarwal, M. M.; Ahammed, Z.; Alakhverdyants, A. V.; Alekseev, I.; Alford, J.; Anderson, B.D.; Arkhipkin, D.; Averichev, G. S.; Balewski, J.; Barnby, L. S.; Baumgart, S.; Beavis, D.R.; Bellwied, R.; Betancourt, M.J.; Betts, R. R.; Bhasin, A.; Bhati, A.K.; Bichsel, H.; Bielčík, Jaroslav; Bielčíková, Jana; Biritz, B.; Bland, L.C.; Bonner, B.E.; Bouchet, J.; Braidot, E.; Brandin, A.V.; Bridgeman, A.; Bruna, E.; Bueltmann, S.; Bunzarov, I.; Burton, T. P.; Cai, X.Z.; Caines, H.; Sanchez, M.C.D.; Catu, O.; Cebra, D.; Cendejas, R.; Cervantes, M.C.; Chajecki, Z.; Chaloupka, Petr; Chattopadhyay, S.; Chen, H.F.; Chen, J.H.; Chen, J.Y.; Cheng, J.; Cherney, M.; Chikanian, A.; Choi, K.E.; Christie, W.; Chung, P.; Clarke, R.F.; Codrington, M.J.M.; Corliss, R.; Cramer, J. G.; Crawford, H. J.; Das, D.; Dash, S.; Leyva, A.D.; De Silva, L.C.; Debbe, R.R.; Dedovich, T. G.; Derevschikov, A.A.; de Souza, R.D.; Didenko, L.; Djawotho, P.; Dogra, S.M.; Dong, X.; Drachenberg, J.L.; Draper, J. E.; Dunlop, J.C.; Mazumdar, M.R.D.; Efimov, L.G.; Elhalhuli, E.; Elnimr, M.; Engelage, J.; Eppley, G.; Erazmus, B.; Estienne, M.; Eun, L.; Evdokimov, O.; Fachini, P.; Fatemi, R.; Fedorisin, J.; Fersch, R.G.; Filip, P.; Finch, E.; Fine, V.; Fisyak, Y.; Gagliardi, C. A.; Gangaharan, D.R.; Ganti, M. S.; Garcia-Solis, E.J.; Geromitsos, A.; Geurts, F.; Ghazikhanian, V.; Ghosh, P.; Gorbunov, Y.N.; Gordon, A.; Grebenyuk, O.; Grosnick, D.; Guertin, S.M.; Gupta, A.; Gupta, N.; Guryn, W.; Haag, B.; Hamed, A.; Han, L.X.; Harris, J.W.; Hays-Wehle, J.P.; Heinz, M.; Heppelmann, S.; Hirsch, A.; Hjort, E.; Hoffmann, A.M.; Hoffmann, G.W.; Hofman, D.J.; Horner, M.J.; Huang, B.; Huang, H.Z.; Humanic, T.J.; Huo, L.; Igo, G.; Jacobs, P.; Jacobs, W.W.; Jena, C.; Jin, F.; Jones, C.L.; Jones, P.G.; Joseph, J.; Judd, E.G.; Kabana, S.; Kajimoto, K.; Kang, K.; Kapitán, Jan; Kauder, K.; Keane, D.; Kechechyan, A.; Kettler, D.; Kikola, D.P.; Kiryluk, J.; Kisiel, A.; Klein, S.R.; Knospe, A.G.; Kocoloski, A.; Koetke, D.D.; Kollegger, T.; Konzer, J.; Koralt, I.; Koroleva, L.; Korsch, W.; Kotchenda, L.; Kushpil, Vasilij; Kravtsov, P.; Krueger, K.; Krus, M.; Kumar, L.; Kurnadi, P.; Lamont, M.A.C.; Landgraf, J.M.; LaPointe, S. (ed.); Lauret, J.; Lebedev, A.; Lednický, Richard; Lee, Ch.; Lee, J.H.; Leight, W.; LeVine, M.J.; Li, C.; Li, L.; Li, N.; Li, W.; Li, X.; Li, Y.; Li, Z.M.; Lin, G.; Lindenbaum, S.J.; Lisa, M.A.; Liu, F.; Liu, H.; Liu, J.; Ljubicic, T.; Llope, W.J.; Longacre, R.S.; Love, W.A.; Lu, Y.; Luo, X.; Ma, G.L.; Ma, Y.G.; Mahapatra, D. P.; Majka, R.; Mall, O.I.; Mangotra, L.K.; Manweiler, R.; Margetis, S.; Markert, C.; Masui, H.; Matis, H.S.; Matulenko, Yu.A.; McDonald, D.; McShane, T.S.; Meschanin, A.; Milner, R.; Minaev, N.G.; Mioduszewski, S.; Mischke, A.; Mitrovski, M.K.; Mohanty, B.; Mondal, M.M.; Morozov, B.; Morozov, D.A.; Munhoz, M. G.; Nandi, B.K.; Nattrass, C.; Nayak, T. K.; Nelson, J.M.; Netrakanti, P.K.; Ng, M.J.; Nogach, L.V.; Nurushev, S.B.; Odyniec, G.; Ogawa, A.; Okorokov, V.; Oldag, E.W.; Olson, D.; Pachr, M.; Page, B.S.; Pal, S.K.; Pandit, Y.; Panebratsev, Yu.; Pawlak, T.; Peitzmann, T.; Perevoztchikov, V.; Perkins, C.; Peryt, W.; Phatak, S.C.; Pile, P.; Planinic, M.; Ploskon, M.A.; Pluta, J.; Plyku, D.; Poljak, N.; Poskanzer, A.M.; Potukuchi, B.V.K.S.; Powell, C.B.; Prindle, D.; Pruneau, C.; Pruthi, N.K.; Pujahari, P.R.; Putschke, J.; Raniwala, R.; Raniwala, S.; Ray, R.L.; Redwine, R.; Reed, R.; Ritter, H.G.; Roberts, J.B.; Rogachevskiy, O.V.; Romero, J.L.; Rose, A.; Roy, C.; Ruan, L.; Sahoo, R.; Sakai, S.; Sakrejda, I.; Sakuma, T.; Salur, S.; Sandweiss, J.; Sangaline, E.; Schambach, J.; Scharenberg, R.P.; Schmitz, N.; Schuster, T.R.; Seele, J.; Seger, J.; Selyuzhenkov, I.; Seyboth, P.; Shahaliev, E.; Shao, M.; Sharma, M.; Shi, S.S.; Sichtermann, E.P.; Simon, F.; Singaraju, R.N.; Skoby, M.J.; Smirnov, N.; Sorensen, P.; Sowinski, J.; Spinka, H.M.; Srivastava, B.; Stanislaus, T.D.S.; Staszak, D.; Stevens, J.R.; Stock, R.; Strikhanov, M.; Stringfellow, B.; Suaide, A. A. P.; Suarez, M.C.; Subba, N.L.; Šumbera, Michal; Sun, X.M.; Sun, Y.; Sun, Z.; Surrow, B.; Svirida, D.N.; Symons, T.J.M.; de Toledo, A. S.; Takahashi, J.; Tang, A.H.; Tang, Z.; Tarini, L.H.; Tarnowsky, T.; Thein, D.; Thomas, J.H.; Tian, J.; Timmins, A.R.; Timoshenko, S.; Tlustý, David; Tokarev, M. V.; Trainor, T.A.; Tram, V.N.; Trentalange, S.; Tribble, R. E.; Tsai, O.D.; Ulery, J.; Ullrich, T.; Underwood, D.G.; Van Buren, G.; van Leeuwen, M.; van Nieuwenhuizen, G.; Vanfossen, J.A.; Varma, R.; Vasconcelos, G.M.S.; Vasiliev, A. N.; Videbaek, F.; Viyogi, Y. P.; Vokal, S.; Voloshin, S.A.; Wada, M.; Walker, M.; Wang, F.; Wang, G.; Wang, H.; Wang, J.S.; Wang, Q.; Wang, X.L.; Wang, Y.; Webb, G.; Westfall, G.D.; Whitten, C.; Wieman, H.; Wissink, S.W.; Witt, R.; Wu, Y.F.; Xie, W.; Xu, N.; Xu, Q.H.; Xu, W.; Xu, Y.; Xu, Z.; Xue, L.; Yang, Y.; Yepes, P.; Yip, K.; Yoo, I.K.; Yue, Q.; Zawisza, M.; Zbroszczyk, H.; Zhan, W.; Zhang, J.B.; Zhang, S.; Zhang, W.M.; Zhang, X.P.; Zhang, Y.; Zhang, Z.P.; Zhao, J.; Zhong, C.; Zhou, J.; Zhou, W.; Zhu, X.; Zhu, Y.H.; Zoulkarneev, R.; Zoulkarneeva, Y.

    2010-01-01

    Roč. 82, č. 2 (2010), 024912/1-024912/14 ISSN 0556-2813 Institutional research plan: CEZ:AV0Z10480505; CEZ:AV0Z10100502 Keywords : AU+AU COLLISIONS * RADIATION * PLASMA Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 3.416, year: 2010

  16. Lateral spreading of Au contacts on InP

    Science.gov (United States)

    Fatemi, Navid S.; Weizer, Victor G.

    1990-01-01

    The contact spreading phenomenon observed when small area Au contacts on InP are annealed at temperatures above about 400 C was investigated. It was found that the rapid lateral expansion of the contact metallization which consumes large quantities of InP during growth is closely related to the third stage in the series of solid state reactions that occur between InP and Au, i.e., to the Au3In-to-Au9In4 transition. Detailed descriptions are presented of both the spreading process and the Au3In-to-Au9In4 transition along with arguments that the two processes are manifestations of the same basic phenomenon.

  17. Reconfigurable c-Si/Au hybrid nanoantenna

    Science.gov (United States)

    Chebykin, A. V.; Zalogina, A. S.; Zuev, D. A.; Makarov, S. V.

    2017-09-01

    We have performed numerical optimization of hybrid c-Si/Au nanoantenna's geometry to improve efficiency of NV-centers radiation. We have shown that Purcell factor at the wavelength 635 nm can be as much as 4550 for point light emitter placed in the gap between gold spherical nanoparticle and truncated silicon nanocone. We have demonstrated that electric field enhancement can reach a value of 12.9 at the wavelength of NV-center pumping, 532 nm. Our results can be useful for the development of more efficient sources of single photons based on NV-centers in nanodiamonds.

  18. Que faisons-nous au CERN ?

    CERN Multimedia

    1999-01-01

    Le CERN a pour vocation la science pure, l'étude des questions les plus fondamentales de la nature:Qu'est-ce que la matière ?D'ou vient-elle ? Comment s'agglomère-t-elle en formes complexes comme les étoiles, les planètes et les êtres humains ? Au CERN, les collisions de particules servent à sonder le coeur de la matière et les chercheurs du Laboratoire étudient ces millions de collisions de particules afin de trouver des réponses à ces questions.

  19. Aspects scanographiques des accidents vasculaires cerebraux au ...

    African Journals Online (AJOL)

    Objectif : évaluer la place de la TDM dans les AVC Méthodologie : étude rétrospective réalisée au CHU Campus de Lomé à partir de 314 compte-rendus sur une période de 36 mois. Faisaient partir de l'étude les patients ayant bénéficié d'un examen tomodensitométrique pour un déficit neurologique hémicorporel ...

  20. Irrigation et information climatique au Burkina Faso (CARA) | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Amélioration de la gouvernance de l'eau et de l'adaptation aux changements climatiques au Cambodge. Le lac Tonlé Sap, au Cambodge, est le plus grand lac d'eau douce en Asie du Sud-Est. Voir davantageAmélioration de la gouvernance de l'eau et de l'adaptation aux changements climatiques au Cambodge ...

  1. Acteurs et strategies face aux nouveaux defis securitaires au Benin ...

    African Journals Online (AJOL)

    De même, de nouveaux acteurs dont la communauté des chasseurs au centre et au nord du Bénin, les adeptes du ''Zangbéto'' au sud, les ONG et autres sont nés avec leurs stratégies. Mots clés: acteurs, stratégies, sécurité, développement. English Abstract. Although the security constitute the essential condition for all ...

  2. Conjugated electrical properties of Au nanoparticle–polyaniline network

    Science.gov (United States)

    Usami, Yuki; Otsuka, Yoichi; Naitoh, Yasuhisa; Matsumoto, Takuya

    2017-12-01

    We investigated the electrical properties of a two-dimensional (2D) network consisting of multiple Au nanoparticles (AuNPs) and self-doped polyaniline sulfonate (SPAN). Nonlinear current–voltage (I–V) characteristics with wide variations were observed in the networks. The temperature dependence of the I–V characteristics exhibited a short localization length, suggesting conjugated electronic properties of the AuNP–SPAN network. This result provides a new direction for network-based molecular electronic devices.

  3. Functional gold nanoclusters as antimicrobial agents for antibiotic-resistant bacteria.

    Science.gov (United States)

    Chen, Wei-Yu; Lin, Ju-Yu; Chen, Wei-Jen; Luo, Liyang; Wei-Guang Diau, Eric; Chen, Yu-Chie

    2010-07-01

    Our aim was to demonstrate that lysozyme-directed generation of gold nanoclusters (Au NCs) are potential antimicrobial agents for antibiotic-resistant bacteria and broad labeling agents for pathogenic bacteria. Lysozyme is an enzyme that is capable of hydrolyzing the cell walls of bacteria. In this study, we demonstrated the generation of functional Au NCs by using lysozyme as the sequester and the reducing agent for Au precursors at 40 degrees C. In addition, to shorten the reaction time, the reaction was conducted under microwave irradiation within a short period of time for the first time. The bioactivity of the lysozyme on the Au NCs was retained. Therefore, the as-prepared lysozyme-Au NCs with desirable fluorescence feature were successfully employed to be broad-band labeling agents for pathogenic bacteria. Furthermore, we also demonstrated that the lysozyme-Au NCs can be used to effectively inhibit the cell growth of notorious antibiotic-resistant bacteria, including pan-drug-resistant Acinetobacter baumannii and vancomycin-resistant Enterococcus faecalis. The potential of employing the lysozyme-Au NCs for bacterial labeling and as antimicrobial agents is expected.

  4. Stability of gold cages (Au16 and Au17) at finite temperature

    Indian Academy of Sciences (India)

    a promising chemical catalyst [4–6]. Owing to such potential applications, a large amount of experimental [7–11] and theoretical [12–20] work probing structural and electronic properties of Au clusters has been reported. These reports reveal that the ground state (GS) geometries of gold clusters with sizes up to a few tens of ...

  5. Magnetic holes in the solar wind between 0.3 AU and 17 AU

    Directory of Open Access Journals (Sweden)

    K. Sperveslage

    2000-01-01

    Full Text Available Magnetic holes (MHs are depressions of the magnetic field magnitude. Turner et al. (1977 identified the first MHs in the solar wind and determined an occurrence rate of 1.5 MHs/d. Winterhalter et al. (1994 developed an automatic identification criterion to search for MHs in Ulysses data in the solar wind between 1 AU and 5.4 AU. We adopt their criterion to expand the search to the heliocentric distances down to 0.3 AU using data from Helios 1 and 2 and up to 17 AU using data from Voyager 2. We relate our observations to two theoretical approaches which describe the so-called linear MHs in which the magnetic vector varies in magnitude rather than direction. Therefore we focus on such linear MHs with a directional change less than 10º. With our observations of about 850 MHs we present the following results: Approximately 30% of all the identified MHs are linear. The maximum angle between the initial magnetic field vector and any vector inside the MH is 20º in average and shows a weak relation to the depth of the MHs. The angle between the initial magnetic field and the minimum variance direction of those structures is large and very probably close to 90º. The MHs are placed in a high β environment even though the average solar wind shows a smaller β. The widths decrease from about 50 proton inertial length in a region between 0.3 AU and 0.4 AU heliocentric distance to about 15 proton inertial length at distances larger than 10 AU. This quantity is correlated with the β of the MH environments with respect to the heliocentric distance. There is a clear preference for the occurrence of depressions instead of compressions. We discuss these results with regard to the main theories of MHs, the mirror instability and the alternative soliton approach. Although our observational results are more consistent with the soliton theory we favour a combination of both. MHs might be the remnants of initial mirror mode structures which can be described as

  6. Preparations for p-Au run in 2015

    Energy Technology Data Exchange (ETDEWEB)

    Liu, C. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.

    2014-12-31

    The p-Au particle collision is a unique category of collision runs. This is resulted from the different charge mass ratio of the proton and fully stripped Au ion (1 vs.79/197). The p-Au run requires a special acceleration ramp, and movement of a number of beam components as required by the beam trajectories. The DX magnets will be moved for the first time in the history of RHIC. In this note, the planning and preparations for p-Au run will be presented.

  7. Structural and optical studies of Au doped titanium oxide films

    Energy Technology Data Exchange (ETDEWEB)

    Alves, E., E-mail: ealves@itn.pt [Instituto Tecnologico e Nuclear (ITN), 2686-953 Sacavem (Portugal); Centro de Fisica Nuclear da Universidade de Lisboa, Av. Gama Pinto, 21649-003 Lisboa (Portugal); Franco, N.; Barradas, N.P. [Instituto Tecnologico e Nuclear (ITN), 2686-953 Sacavem (Portugal); Centro de Fisica Nuclear da Universidade de Lisboa, Av. Gama Pinto, 21649-003 Lisboa (Portugal); Nunes, B. [Instituto Tecnologico e Nuclear (ITN), 2686-953 Sacavem (Portugal); Lopes, J. [Instituto Superior de Engenharia de Lisboa (Portugal); Cavaleiro, A. [SEC-CEMUC - Universidade de Coimbra, Dept. Eng. Mecanica, Polo II, 3030-788 Coimbra (Portugal); Torrell, M.; Cunha, L.; Vaz, F. [Centro de Fisica, Universidade do Minho, 4800-058 Guimaraes (Portugal)

    2012-02-01

    Thin films of TiO{sub 2} were doped with Au by ion implantation and in situ during the deposition. The films were grown by reactive magnetron sputtering and deposited in silicon and glass substrates at a temperature around 150 Degree-Sign C. The undoped films were implanted with Au fluences in the range of 5 Multiplication-Sign 10{sup 15} Au/cm{sup 2}-1 Multiplication-Sign 10{sup 17} Au/cm{sup 2} with a energy of 150 keV. At a fluence of 5 Multiplication-Sign 10{sup 16} Au/cm{sup 2} the formation of Au nanoclusters in the films is observed during the implantation at room temperature. The clustering process starts to occur during the implantation where XRD estimates the presence of 3-5 nm precipitates. After annealing in a reducing atmosphere, the small precipitates coalesce into larger ones following an Ostwald ripening mechanism. In situ XRD studies reveal that Au atoms start to coalesce at 350 Degree-Sign C, reaching the precipitates dimensions larger than 40 nm at 600 Degree-Sign C. Annealing above 700 Degree-Sign C promotes drastic changes in the Au profile of in situ doped films with the formation of two Au rich regions at the interface and surface respectively. The optical properties reveal the presence of a broad band centered at 550 nm related to the plasmon resonance of gold particles visible in AFM maps.

  8. Structural and optical studies of Au doped titanium oxide films

    International Nuclear Information System (INIS)

    Alves, E.; Franco, N.; Barradas, N.P.; Nunes, B.; Lopes, J.; Cavaleiro, A.; Torrell, M.; Cunha, L.; Vaz, F.

    2012-01-01

    Thin films of TiO 2 were doped with Au by ion implantation and in situ during the deposition. The films were grown by reactive magnetron sputtering and deposited in silicon and glass substrates at a temperature around 150 °C. The undoped films were implanted with Au fluences in the range of 5 × 10 15 Au/cm 2 –1 × 10 17 Au/cm 2 with a energy of 150 keV. At a fluence of 5 × 10 16 Au/cm 2 the formation of Au nanoclusters in the films is observed during the implantation at room temperature. The clustering process starts to occur during the implantation where XRD estimates the presence of 3–5 nm precipitates. After annealing in a reducing atmosphere, the small precipitates coalesce into larger ones following an Ostwald ripening mechanism. In situ XRD studies reveal that Au atoms start to coalesce at 350 °C, reaching the precipitates dimensions larger than 40 nm at 600 °C. Annealing above 700 °C promotes drastic changes in the Au profile of in situ doped films with the formation of two Au rich regions at the interface and surface respectively. The optical properties reveal the presence of a broad band centered at 550 nm related to the plasmon resonance of gold particles visible in AFM maps.

  9. Envenimation scorpionique chez l'enfant au centre hospitalier ...

    African Journals Online (AJOL)

    Le scorpion jaune était plus incriminé dans 56,8% des cas, contre 13,6% pour le scorpion noir. A l'admission 0,5% des malades ont été classé au grade I ; 8,6% au grade II et 30,9% au grade III. On a observé 9,9% de décès. Au total, les envenimations scorpioniques sont très fréquentes dans la région d'Agadez, et sont ...

  10. Low contact resistance in epitaxial graphene devices for quantum metrology

    Energy Technology Data Exchange (ETDEWEB)

    Yager, Tom, E-mail: yager@chalmers.se, E-mail: ywpark@snu.ac.kr; Lartsev, Arseniy; Lara-Avila, Samuel; Kubatkin, Sergey [Department of Microtechnology and Nanoscience, Chalmers University of Technology Göteborg, S-412 96 (Sweden); Cedergren, Karin [School of Physics, University of New South Wales, Sydney, NSW-2052 (Australia); Yakimova, Rositsa [Department of Physics, Chemistry and Biology (IFM), Linköping University Linköping, S-581 83 (Sweden); Panchal, Vishal; Kazakova, Olga [National Physical Laboratory, Teddington, TW11 0LW (United Kingdom); Tzalenchuk, Alexander [National Physical Laboratory, Teddington, TW11 0LW (United Kingdom); Department of Physics, Royal Holloway, University of London, Egham, TW20 0EX (United Kingdom); Kim, Kyung Ho; Park, Yung Woo, E-mail: yager@chalmers.se, E-mail: ywpark@snu.ac.kr [Department of Physics and Astronomy, Seoul National University, Seoul 151-747 (Korea, Republic of)

    2015-08-15

    We investigate Ti/Au contacts to monolayer epitaxial graphene on SiC (0001) for applications in quantum resistance metrology. Using three-terminal measurements in the quantum Hall regime we observed variations in contact resistances ranging from a minimal value of 0.6 Ω up to 11 kΩ. We identify a major source of high-resistance contacts to be due bilayer graphene interruptions to the quantum Hall current, whilst discarding the effects of interface cleanliness and contact geometry for our fabricated devices. Moreover, we experimentally demonstrate methods to improve the reproducibility of low resistance contacts (<10 Ω) suitable for high precision quantum resistance metrology.

  11. Low contact resistance in epitaxial graphene devices for quantum metrology

    Directory of Open Access Journals (Sweden)

    Tom Yager

    2015-08-01

    Full Text Available We investigate Ti/Au contacts to monolayer epitaxial graphene on SiC (0001 for applications in quantum resistance metrology. Using three-terminal measurements in the quantum Hall regime we observed variations in contact resistances ranging from a minimal value of 0.6 Ω up to 11 kΩ. We identify a major source of high-resistance contacts to be due bilayer graphene interruptions to the quantum Hall current, whilst discarding the effects of interface cleanliness and contact geometry for our fabricated devices. Moreover, we experimentally demonstrate methods to improve the reproducibility of low resistance contacts (<10 Ω suitable for high precision quantum resistance metrology.

  12. Observation of D0 Meson Nuclear Modifications in Au +Au Collisions at √sNN =200 GeV

    Science.gov (United States)

    Adamczyk, L.; Adkins, J. K.; Agakishiev, G.; Aggarwal, M. M.; Ahammed, Z.; Alekseev, I.; Alford, J.; Anson, C. D.; Aparin, A.; Arkhipkin, D.; Aschenauer, E. C.; Averichev, G. S.; Banerjee, A.; Beavis, D. R.; Bellwied, R.; Bhasin, A.; Bhati, A. K.; Bhattarai, P.; Bichsel, H.; Bielcik, J.; Bielcikova, J.; Bland, L. C.; Bordyuzhin, I. G.; Borowski, W.; Bouchet, J.; Brandin, A. V.; Brovko, S. G.; Bültmann, S.; Bunzarov, I.; Burton, T. P.; Butterworth, J.; Caines, H.; Calderón de la Barca Sánchez, M.; Cebra, D.; Cendejas, R.; Cervantes, M. C.; Chaloupka, P.; Chang, Z.; Chattopadhyay, S.; Chen, H. F.; Chen, J. H.; Chen, L.; Cheng, J.; Cherney, M.; Chikanian, A.; Christie, W.; Chwastowski, J.; Codrington, M. J. M.; Contin, G.; Cramer, J. G.; Crawford, H. J.; Cui, X.; Das, S.; Davila Leyva, A.; De Silva, L. C.; Debbe, R. R.; Dedovich, T. G.; Deng, J.; Derevschikov, A. A.; Derradi de Souza, R.; Dhamija, S.; di Ruzza, B.; Didenko, L.; Dilks, C.; Ding, F.; Djawotho, P.; Dong, X.; Drachenberg, J. L.; Draper, J. E.; Du, C. M.; Dunkelberger, L. E.; Dunlop, J. C.; Efimov, L. G.; Engelage, J.; Engle, K. S.; Eppley, G.; Eun, L.; Evdokimov, O.; Eyser, O.; Fatemi, R.; Fazio, S.; Fedorisin, J.; Filip, P.; Finch, E.; Fisyak, Y.; Flores, C. E.; Gagliardi, C. A.; Gangadharan, D. R.; Garand, D.; Geurts, F.; Gibson, A.; Girard, M.; Gliske, S.; Greiner, L.; Grosnick, D.; Gunarathne, D. S.; Guo, Y.; Gupta, A.; Gupta, S.; Guryn, W.; Haag, B.; Hamed, A.; Han, L.-X.; Haque, R.; Harris, J. W.; Heppelmann, S.; Hirsch, A.; Hoffmann, G. W.; Hofman, D. J.; Horvat, S.; Huang, B.; Huang, H. Z.; Huang, X.; Huck, P.; Humanic, T. J.; Igo, G.; Jacobs, W. W.; Jang, H.; Judd, E. G.; Kabana, S.; Kalinkin, D.; Kang, K.; Kauder, K.; Ke, H. W.; Keane, D.; Kechechyan, A.; Kesich, A.; Khan, Z. H.; Kikola, D. P.; Kisel, I.; Kisiel, A.; Koetke, D. D.; Kollegger, T.; Konzer, J.; Koralt, I.; Kotchenda, L.; Kraishan, A. F.; Kravtsov, P.; Krueger, K.; Kulakov, I.; Kumar, L.; Kycia, R. A.; Lamont, M. A. C.; Landgraf, J. M.; Landry, K. D.; Lauret, J.; Lebedev, A.; Lednicky, R.; Lee, J. H.; LeVine, M. J.; Li, C.; Li, W.; Li, X.; Li, X.; Li, Y.; Li, Z. M.; Lisa, M. A.; Liu, F.; Ljubicic, T.; Llope, W. J.; Lomnitz, M.; Longacre, R. S.; Luo, X.; Ma, G. L.; Ma, Y. G.; Madagodagettige Don, D. M. M. D.; Mahapatra, D. P.; Majka, R.; Margetis, S.; Markert, C.; Masui, H.; Matis, H. S.; McDonald, D.; McShane, T. S.; Minaev, N. G.; Mioduszewski, S.; Mohanty, B.; Mondal, M. M.; Morozov, D. A.; Mustafa, M. K.; Nandi, B. K.; Nasim, Md.; Nayak, T. K.; Nelson, J. M.; Nigmatkulov, G.; Nogach, L. V.; Noh, S. Y.; Novak, J.; Nurushev, S. B.; Odyniec, G.; Ogawa, A.; Oh, K.; Ohlson, A.; Okorokov, V.; Oldag, E. W.; Olvitt, D. L.; Pachr, M.; Page, B. S.; Pal, S. K.; Pan, Y. X.; Pandit, Y.; Panebratsev, Y.; Pawlak, T.; Pawlik, B.; Pei, H.; Perkins, C.; Peryt, W.; Pile, P.; Planinic, M.; Pluta, J.; Poljak, N.; Porter, J.; Poskanzer, A. M.; Pruthi, N. K.; Przybycien, M.; Pujahari, P. R.; Putschke, J.; Qiu, H.; Quintero, A.; Ramachandran, S.; Raniwala, R.; Raniwala, S.; Ray, R. L.; Riley, C. K.; Ritter, H. G.; Roberts, J. B.; Rogachevskiy, O. V.; Romero, J. L.; Ross, J. F.; Roy, A.; Ruan, L.; Rusnak, J.; Rusnakova, O.; Sahoo, N. R.; Sahu, P. K.; Sakrejda, I.; Salur, S.; Sandweiss, J.; Sangaline, E.; Sarkar, A.; Schambach, J.; Scharenberg, R. P.; Schmah, A. M.; Schmidke, W. B.; Schmitz, N.; Seger, J.; Seyboth, P.; Shah, N.; Shahaliev, E.; Shanmuganathan, P. V.; Shao, M.; Sharma, B.; Shen, W. Q.; Shi, S. S.; Shou, Q. Y.; Sichtermann, E. P.; Singaraju, R. N.; Skoby, M. J.; Smirnov, D.; Smirnov, N.; Solanki, D.; Sorensen, P.; Spinka, H. M.; Srivastava, B.; Stanislaus, T. D. S.; Stevens, J. R.; Stock, R.; Strikhanov, M.; Stringfellow, B.; Sumbera, M.; Sun, X.; Sun, X. M.; Sun, Y.; Sun, Z.; Surrow, B.; Svirida, D. N.; Symons, T. J. M.; Szelezniak, M. A.; Takahashi, J.; Tang, A. H.; Tang, Z.; Tarnowsky, T.; Thomas, J. H.; Timmins, A. R.; Tlusty, D.; Tokarev, M.; Trentalange, S.; Tribble, R. E.; Tribedy, P.; Trzeciak, B. A.; Tsai, O. D.; Turnau, J.; Ullrich, T.; Underwood, D. G.; Van Buren, G.; van Nieuwenhuizen, G.; Vandenbroucke, M.; Vanfossen, J. A.; Varma, R.; Vasconcelos, G. M. S.; Vasiliev, A. N.; Vertesi, R.; Videbæk, F.; Viyogi, Y. P.; Vokal, S.; Vossen, A.; Wada, M.; Wang, F.; Wang, G.; Wang, H.; Wang, J. S.; Wang, X. L.; Wang, Y.; Wang, Y.; Webb, G.; Webb, J. C.; Westfall, G. D.; Wieman, H.; Wissink, S. W.; Witt, R.; Wu, Y. F.; Xiao, Z.; Xie, W.; Xin, K.; Xu, H.; Xu, J.; Xu, N.; Xu, Q. H.; Xu, Y.; Xu, Z.; Yan, W.; Yang, C.; Yang, Y.; Yang, Y.; Ye, Z.; Yepes, P.; Yi, L.; Yip, K.; Yoo, I.-K.; Yu, N.; Zawisza, Y.; Zbroszczyk, H.; Zha, W.; Zhang, J. B.; Zhang, J. L.; Zhang, S.; Zhang, X. P.; Zhang, Y.; Zhang, Z. P.; Zhao, F.; Zhao, J.; Zhong, C.; Zhu, X.; Zhu, Y. H.; Zoulkarneeva, Y.; Zyzak, M.; STAR Collaboration

    2014-10-01

    We report the first measurement of charmed-hadron (D0) production via the hadronic decay channel (D0→K-+π+) in Au +Au collisions at √sNN =200 GeV with the STAR experiment. The charm production cross section per nucleon-nucleon collision at midrapidity scales with the number of binary collisions, Nbin, from p +p to central Au +Au collisions. The D0 meson yields in central Au +Au collisions are strongly suppressed compared to those in p+p scaled by Nbin, for transverse momenta pT>3 GeV /c, demonstrating significant energy loss of charm quarks in the hot and dense medium. An enhancement at intermediate pT is also observed. Model calculations including strong charm-medium interactions and coalescence hadronization describe our measurements.

  13. Temperature dependence of spin-orbit torques in Cu-Au alloys

    KAUST Repository

    Wen, Yan

    2017-03-07

    We investigated current driven spin-orbit torques in Cu40Au60/Ni80Fe20/Ti layered structures with in-plane magnetization. We have demonstrated a reliable and convenient method to separate dampinglike torque and fieldlike torque by using the second harmonic technique. It is found that the dampinglike torque and fieldlike torque depend on temperature very differently. Dampinglike torque increases with temperature, while fieldlike torque decreases with temperature, which are different from results obtained previously in other material systems. We observed a nearly linear dependence between the spin Hall angle and longitudinal resistivity, suggesting that skew scattering may be the dominant mechanism of spin-orbit torques.

  14. Electrical characterization of Au/ZnO thin film Schottky diode on silicon substrate

    Directory of Open Access Journals (Sweden)

    Lintu Rajan

    2016-09-01

    Full Text Available An array of Gold (Au schottky contacts have been deposited on RF Sputtered nanocrystalline Zinc Oxide thin film. A systematic analysis on the electrical parameters of the Schottky diode with the help of current–voltage (I–V and capacitance-voltage (C–V measurements has been done, which confirmed its excellent rectifying characteristics. To incorporate the influence of series resistance in the determination of Schottky diode parameters (barrier height, ideality factor and saturation current, Cheung's method along with thermionic emission model has also used. The discrepancy in the value of barrier height determined from C–V characteristics throws light into the presence of interface states.

  15. Mesomorphic Lamella Rolling of Au in Vacuum

    Directory of Open Access Journals (Sweden)

    Chen Shuei-Yuan

    2009-01-01

    Full Text Available Abstract Lamellar nanocondensates in partial epitaxy with larger-sized multiply twinned particles (MTPs or alternatively in the form of multiple-walled tubes (MWTs having nothing to do with MTP were produced by the very energetic pulse laser ablation of Au target in vacuum under specified power density and pulses. Transmission electron microscopic observations revealed (111-motif diffraction and low-angle scattering. They correspond to layer interspacing (0.241–0.192 nm and the nearest neighbor distance (ca. 0.74–0.55 nm of atom clusters within the layer, respectively, for the lamella, which shows interspacing contraction with decreasing particle size under the influence of surface stress and rolls up upon electron irradiation. The uncapped MWT has nearly concentric amorphous layers interspaced by 0.458–0.335 nm depending on dislocation distribution and becomes spherical onions for surface-area reduction upon electron dosage. Analogous to graphene-derived tubular materials, the lamella-derived MWT of Au could have pentagon–hexagon pair at its zig-zag junction and useful optoelectronic properties worthy of exploration.

  16. Approche historiographique des pratiques sportives au Cameroun

    Directory of Open Access Journals (Sweden)

    Biwole M. Claude Emmanuel Abolo

    2016-01-01

    En 50 ans d'indépendance, le sport camerounais a beaucoup évolué. De 11 en 1970, les fédérations sportives sont passées à plus de 40 aujourd'hui et les titres, trophées et médailles ne se comptent plus depuis lors. Le Cameroun est devenu progressivement une nation où le sport compte et où l'exploit sportif n'est plus méprisé, rejeté, voire vilipendé. Hier assimilés à des brutes épaisses, les sportifs sont aujourd'hui admirés et adulés. Finie l'image négative de marginaux qui leur collait au corps : finis les sous-entendus ridicules où ils étaient classés au bas de l'échelle sociale, juste bons pour bander les muscles et réaliser des performances. C'est cela la plus grande victoire du sport camerounais en 50 ans d'existence. Il a réussi à faire l'unanimité et les performances des sportifs devenues pour toute la nation un modèle, une référence et un réel motif de fierté.

  17. Apprentissage administratif : L'apprentissage au CERN

    CERN Multimedia

    2004-01-01

    APPRENTISSAGE ADMINISTRATIF FORMATION ET DEVELOPPEMENT HR/PMD/RCC L'APPRENTISSAGE AU CERN pour les professions d'employé(e) de commerce et d'assistant(e) en information documentaire L'apprentissage au CERN est régi par les lois, règlements et contrats en vigueur dans le Canton de Genève. En cas de réussite à l'examen de fin d'apprentissage, les apprentis obtiennent le Certificat Fédéral de Capacité Suisse (CFC). 1 place est offerte pour la formation d'employé(e) de commerce 2 places sont offertes pour la formation d'assistant(e) en information documentaire L'apprentissage dure 3 ans. Minima requis pour faire acte de candidature : • avoir terminé la scolarité obligatoire • être ressortissant d'un pays membre du CERN (Allemagne, Autriche, Belgique, Bulgarie, Danemark, Espagne,Finlande, France, Grèce, Hongrie, Italie, Norvège...

  18. Microstructural evolution of Au/TiO{sub 2} nanocomposite films: The influence of Au concentration and thermal annealing

    Energy Technology Data Exchange (ETDEWEB)

    Borges, J., E-mail: joelborges@fisica.uminho.pt [Instituto Pedro Nunes, Laboratório de Ensaios, Desgaste e Materiais, Rua Pedro Nunes, 3030-199 Coimbra (Portugal); SEG-CEMUC, Mechanical Engineering Department, University of Coimbra, 3030-788 Coimbra (Portugal); Centro/Departamento de Física, Universidade do Minho, Campus de Gualtar, 4710-057 Braga (Portugal); Kubart, T.; Kumar, S.; Leifer, K. [Solid-State Electronics, Department of Engineering Sciences, Uppsala University, P.O. Box 534, Uppsala SE-751 21 (Sweden); Rodrigues, M.S. [Instituto Pedro Nunes, Laboratório de Ensaios, Desgaste e Materiais, Rua Pedro Nunes, 3030-199 Coimbra (Portugal); Centro/Departamento de Física, Universidade do Minho, Campus de Gualtar, 4710-057 Braga (Portugal); Duarte, N.; Martins, B.; Dias, J.P. [Instituto Pedro Nunes, Laboratório de Ensaios, Desgaste e Materiais, Rua Pedro Nunes, 3030-199 Coimbra (Portugal); Cavaleiro, A. [SEG-CEMUC, Mechanical Engineering Department, University of Coimbra, 3030-788 Coimbra (Portugal); Vaz, F. [SEG-CEMUC, Mechanical Engineering Department, University of Coimbra, 3030-788 Coimbra (Portugal); Centro/Departamento de Física, Universidade do Minho, Campus de Gualtar, 4710-057 Braga (Portugal)

    2015-04-01

    Nanocomposite thin films consisting of a dielectric matrix, such as titanium oxide (TiO{sub 2}), with embedded gold (Au) nanoparticles were prepared and will be analysed and discussed in detail in the present work. The evolution of morphological and structural features was studied for a wide range of Au concentrations and for annealing treatments in air, for temperatures ranging from 200 to 800 °C. Major findings revealed that for low Au atomic concentrations (at.%), there are only traces of clustering, and just for relatively high annealing temperatures, T ≥ 500 °C. Furthermore, the number of Au nanoparticles is extremely low, even for the highest annealing temperature, T = 800 °C. It is noteworthy that the TiO{sub 2} matrix also crystallizes in the anatase phase for annealing temperatures above 300 °C. For intermediate Au contents (5 at.% ≤ C{sub Au} ≤ 15 at.%), the formation of gold nanoclusters was much more evident, beginning at lower annealing temperatures (T ≥ 200 °C) with sizes ranging from 2 to 25 nm as the temperature increased. A change in the matrix crystallization from anatase to rutile was also observed in this intermediate range of compositions. For the highest Au concentrations (> 20 at.%), the films tended to form relatively larger clusters, with sizes above 20 nm (for T ≥ 400 °C). It is demonstrated that the structural and morphological characteristics of the films are strongly affected by the annealing temperature, as well as by the particular amounts, size and distribution of the Au nanoparticles dispersed in the TiO{sub 2} matrix. - Highlights: • Au:TiO{sub 2} films were produced by magnetron sputtering and post-deposition annealing. • The Au concentration in the films increases with the Au pellet area. • Annealing induced microstructural changes in the films. • The nanoparticle size evolution with temperature depends on the Au concentration.

  19. Hollow Au@Pd and Au@Pt core-shell nanoparticles as electrocatalysts for ethanol oxidation reactions

    KAUST Repository

    Song, Hyon Min

    2012-09-27

    Hybrid alloys among gold, palladium and platinum become a new category of catalysts primarily due to their enhanced catalytic effects. Enhancement means not only their effectiveness, but also their uniqueness as catalysts for the reactions that individual metals may not catalyze. Here, preparation of hollow Au@Pd and Au@Pt core-shell nanoparticles (NPs) and their use as electrocatalysts are reported. Galvanic displacement with Ag NPs is used to obtain hollow NPs, and higher reduction potential of Au compared to Ag, Pd, and Pt helps to produce hollow Au cores first, followed by Pd or Pt shell growth. Continuous and highly crystalline shell growth was observed in Au@Pd core-shell NPs, but the sporadic and porous-like structure was observed in Au@Pt core-shell NPs. Along with hollow core-shell NPs, hollow porous Pt and hollow Au NPs are also prepared from Ag seed NPs. Twin boundaries which are typically observed in large size (>20 nm) Au NPs were not observed in hollow Au NPs. This absence is believed to be due to the role of the hollows, which significantly reduce the strain energy of edges where the two lattice planes meet. In ethanol oxidation reactions in alkaline medium, hollow Au@Pd core-shell NPs show highest current density in forward scan. Hollow Au@Pt core-shell NPs maintain better catalytic activities than metallic Pt, which is thought to be due to the better crystallinity of Pt shells as well as the alloy effect of Au cores. © 2012 The Royal Society of Chemistry.

  20. Electrical properties of Au/CdZnTe/Au detectors grown by the boron oxide encapsulated Vertical Bridgman technique

    Energy Technology Data Exchange (ETDEWEB)

    Turturici, A.A. [Dipartimento di Fisica e Chimica, Università di Palermo, Viale delle Scienze, Edificio 18, Palermo 90128 (Italy); Abbene, L., E-mail: leonardo.abbene@unipa.it [Dipartimento di Fisica e Chimica, Università di Palermo, Viale delle Scienze, Edificio 18, Palermo 90128 (Italy); Gerardi, G. [Dipartimento di Fisica e Chimica, Università di Palermo, Viale delle Scienze, Edificio 18, Palermo 90128 (Italy); Benassi, G. [due2lab s.r.l., Via Paolo Borsellino 2, Scandiano, 42019 Reggio Emilia (Italy); Bettelli, M.; Calestani, D. [IMEM/CNR, Parco Area delle Scienze 37/A, Parma 43100 (Italy); Zambelli, N. [due2lab s.r.l., Via Paolo Borsellino 2, Scandiano, 42019 Reggio Emilia (Italy); Raso, G. [Dipartimento di Fisica e Chimica, Università di Palermo, Viale delle Scienze, Edificio 18, Palermo 90128 (Italy); Zappettini, A. [IMEM/CNR, Parco Area delle Scienze 37/A, Parma 43100 (Italy); Principato, F. [Dipartimento di Fisica e Chimica, Università di Palermo, Viale delle Scienze, Edificio 18, Palermo 90128 (Italy)

    2016-09-11

    In this work we report on the results of electrical characterization of new CdZnTe detectors grown by the Boron oxide encapsulated Vertical Bridgman technique (B-VB), currently produced at IMEM-CNR (Parma, Italy). The detectors, with gold electroless contacts, have different thicknesses (1 and 2.5 mm) and the same electrode layout, characterized by a central anode surrounded by a guard-ring electrode. Investigations on the charge transport mechanisms and the electrical contact properties, through the modeling of the measured current–voltage (I–V) curves, were performed. Generally, the detectors are characterized by low leakage currents at high bias voltages even at room temperature: 34 nA/cm{sup 2} (T=25 °C) at 10,000 V/cm, making them very attractive for high flux X-ray measurements, where high bias voltage operation is required. The Au/CdZnTe barrier heights of the devices were estimated by using the interfacial layer-thermionic-diffusion (ITD) model in the reverse bias voltage range. Comparisons with CdZnTe detectors, grown by Traveling Heater Method (THM) and characterized by the same electrode layout, deposition technique and resistivity, were also performed.

  1. Impedimetric Aptasensor for Ochratoxin A Determination Based on Au Nanoparticles Stabilized with Hyper-Branched Polymer

    Directory of Open Access Journals (Sweden)

    Gennady Evtugyn

    2013-11-01

    Full Text Available An impedimetric aptasensor for ochratoxin A (OTA detection has been developed on the base of a gold electrode covered with a new modifier consisting of electropolymerized Neutral Red and a mixture of Au nanoparticles suspended in the dendrimeric polymer Botlorn H30®. Thiolated aptamer specific to OTA was covalently attached to Au nanoparticles via Au-S bonding. The interaction of the aptamer with OTA induced the conformational switch of the aptamer from linear to guanine quadruplex form followed by consolidation of the surface layer and an increase of the charge transfer resistance. The aptasensor makes it possible to detect from 0.1 to 100 nM of OTA (limit of detection: 0.02 nM in the presence of at least 50 fold excess of ochratoxin B. The applicability of the aptasensor for real sample assay was confirmed by testing spiked beer samples. The recovery of 2 nM OTA was found to be 70% for light beer and 78% for dark beer.

  2. Characterization of self-assembled electrodes based on Au-Pt nanoparticles for PEMFC application

    Energy Technology Data Exchange (ETDEWEB)

    Valenzuela, E. [Univ. Politecnica de Chiapas (Mexico). Energia y Sustentabilidad; Sebastian, P.J.; Gamboa, S.A.; Joseph, S. [Univ. Nacional Autonoma de Mexico, Morelos (Mexico). Centrode Investigacion en Energia; Pal, U. [Univ. Autonoma de Puebla, Pue (Mexico). Inst. de Fisica; Gonzalez, I. [Univ. Autonoma Metropolitana, Mexico City (Mexico). Dept. de Quimica

    2010-07-01

    This paper described the synthesis and characterization of gold (Au), platinum (Pt) and Au-Pt nanoparticles impregnated on a Nafion membrane in a proton exchange membrane fuel cell (PEMFC). The aim of the study was to fabricate the membrane electrode assembly (MEA) by depositing the nanoparticles on the membrane using an immersion technique. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) were used to study the deposition process. Electrochemical impedance spectroscopy (EIS) was used to study the membrane proton conduction process. An elemental mapping analysis was performed in order to study the location of the Au and Pt in the self-assemblies. Results of the study showed that the particles deposited on the Nafion had good stability and a homogenous distribution along the membrane surface. The particles showed a direct relation in size and location with the hydrophilic and hydrophobic distribution phases of the membrane. The main membrane resistance was located between the membrane and the electrolyte. The self-assembled electrodes demonstrated a good performance at standard conditions. 33 refs., 4 tabs., 11 figs.

  3. Au doping effect on the electrical and magnetic properties of Fe3O4 nanoparticles

    Science.gov (United States)

    Mahmood, Asif; Ramay, Shahid Mahmood; Al-Zaghayer, Yousef S.; Alhazaa, A. N.; Al Masary, Waheed A.; Atiq, Shahid

    2015-12-01

    Impurities free ferromagnetic Fe3O4 was prepared via sol-gel auto-combustion method and then gold was doped with various concentrations 1, 3 and 5 wt.% using conventional deposition-precipitation method. All samples of Fe3O4 with/without Au doping were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM). The room temperature magnetic hysteresis loops of all the samples were measured using a physical property measuring system (PPMS), and the results showed a ferromagnetic behavior at room temperature. The results obtained confirmed the fabrication of magnetite-gold composite nanoparticles. The results showed that the resistance and the magnetic behavior of the samples decrease sharply with the increase of Au concentration indicating semiconducting behavior. The saturation magnetization (Ms) of the bare Fe3O4 sample (94.72 emu/g) is much higher than that (66.78 emu/g) of the 5 wt.% Au-doped Fe3O4 sample.

  4. Controlled synthesis of PbS-Au nanostar-nanoparticle heterodimers and cap-like Au nanoparticles

    Science.gov (United States)

    Zhao, Nana; Li, Lianshan; Huang, Teng; Qi, Limin

    2010-11-01

    Uniform PbS-Au nanostar-nanoparticle heterodimers consisting of one Au nanoparticle grown on one horn of a well-defined six-horn PbS nanostar were prepared using the PbS nanostars as growth substrates for the selective deposition of Au nanoparticles. The size of the Au nanoparticles on the horns of the PbS nanostars could be readily adjusted by changing the PbS concentration for the deposition of Au nanoparticles. An optimum cetyltrimethylammonium bromide concentration and temperature were essential for the selective deposition of uniform Au nanoparticles on single horns of the PbS nanostars. Unusual PbS-Au nanoframe-nanoparticle heterodimers were obtained by etching the PbS-Au nanostar-nanoparticle heterodimers with oxalic acid while novel cap-like Au nanoparticles were obtained by etching with hydrochloric acid. The obtained heterodimeric nanostructures and cap-like nanoparticles are promising candidates for anisotropic nanoscale building blocks for the controllable assembly of useful, complex architectures.

  5. Gate Tunable Transport in Graphene/MoS2/(Cr/Au Vertical Field-Effect Transistors

    Directory of Open Access Journals (Sweden)

    Ghazanfar Nazir

    2017-12-01

    Full Text Available Two-dimensional materials based vertical field-effect transistors have been widely studied due to their useful applications in industry. In the present study, we fabricate graphene/MoS2/(Cr/Au vertical transistor based on the mechanical exfoliation and dry transfer method. Since the bottom electrode was made of monolayer graphene (Gr, the electrical transport in our Gr/MoS2/(Cr/Au vertical transistors can be significantly modified by using back-gate voltage. Schottky barrier height at the interface between Gr and MoS2 can be modified by back-gate voltage and the current bias. Vertical resistance (Rvert of a Gr/MoS2/(Cr/Au transistor is compared with planar resistance (Rplanar of a conventional lateral MoS2 field-effect transistor. We have also studied electrical properties for various thicknesses of MoS2 channels in both vertical and lateral transistors. As the thickness of MoS2 increases, Rvert increases, but Rplanar decreases. The increase of Rvert in the thicker MoS2 film is attributed to the interlayer resistance in the vertical direction. However, Rplanar shows a lower value for a thicker MoS2 film because of an excess of charge carriers available in upper layers connected directly to source/drain contacts that limits the conduction through layers closed to source/drain electrodes. Hence, interlayer resistance associated with these layers contributes to planer resistance in contrast to vertical devices in which all layers contribute interlayer resistance.

  6. Ultra-low contact resistance in graphene devices at the Dirac point

    Science.gov (United States)

    Anzi, Luca; Mansouri, Aida; Pedrinazzi, Paolo; Guerriero, Erica; Fiocco, Marco; Pesquera, Amaia; Centeno, Alba; Zurutuza, Amaia; Behnam, Ashkan; Carrion, Enrique A.; Pop, Eric; Sordan, Roman

    2018-04-01

    Contact resistance is one of the main factors limiting performance of short-channel graphene field-effect transistors (GFETs), preventing their use in low-voltage applications. Here we investigated the contact resistance between graphene grown by chemical vapor deposition (CVD) and different metals, and found that etching holes in graphene below the contacts consistently reduced the contact resistance, down to 23 Ω \\cdot μ m with Au contacts. This low contact resistance was obtained at the Dirac point of graphene, in contrast to previous studies where the lowest contact resistance was obtained at the highest carrier density in graphene (here 200 Ω \\cdot μ m was obtained under such conditions). The ‘holey’ Au contacts were implemented in GFETs which exhibited an average transconductance of 940 S m-1 at a drain bias of only 0.8 V and gate length of 500 nm, which out-perform GFETs with conventional Au contacts.

  7. Viscoelastic nature of Au nanoparticle–PDMS nanocomposite gels

    Indian Academy of Sciences (India)

    Even a very low Au content of 0.09 wt% is sufficient enough to bring in the transition from sponge state to gel state at room temperature. ... gel properties can have direct influence on the processability of Au nanoparticle–PDMS nanocomposite gels, with interesting implications in electronic, optical and microfluidic devices.

  8. Microstructural evolution of eutectic Au-Sn solder joints

    Energy Technology Data Exchange (ETDEWEB)

    Song, Ho Geon [Univ. of California, Berkeley, CA (United States)

    2002-05-01

    Current trends toward miniaturization and the use of lead(Pb)-free solder in electronic packaging present new problems in the reliability of solder joints. This study was performed in order to understand the microstructure and microstructural evolution of small volumes of nominally eutectic Au-Sn solder joints (80Au-20Sn by weight), which gives insight into properties and reliability.

  9. Interfacial microstructures and kinetics of Au/SnAgCu

    International Nuclear Information System (INIS)

    Lee, Teck Kheng; Zhang, Sam; Wong, C.C.; Tan, A.C.; Hadikusuma, Davin

    2006-01-01

    The gold/lead-free solder system, or Au/SnAgCu is a potential flip chip interconnect solutions for fine-pitch applications. This paper studies the interfacial microstructures and initial isothermal solid-liquid interdiffusion kinetics during the first 3 s of bonding at 230-290 deg. C. As revealed by Scanning Electron Microscopy (SEM), different morphologies of AuSn, AuSn 2 and AuSn 4 are observed under different bonding conditions. The initial Au-Sn solid/liquid interdiffusion kinetics is discussed with respect to its microstructures. The rate of Au consumption is used as a measure of the rate of intermetallic compound (IMC) formation. The fitted power law relationship reveals kinetically that Au consumption follows the Arrhenius relationship with a time exponent of 0.5. Isothermal aging at temperatures between 125 deg. C and 165 deg. C gives rise to activation energies and the rate of Au consumption in solid-liquid interdiffusion to be two orders of magnitude faster than solid interdiffusion

  10. Soutien au Conseil arabe des sciences sociales | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ce projet fournira un soutien institutionnel au nouveau Conseil arabe des sciences sociales (CASS) afin qu'il puisse réaliser un vaste programme de recherche. Le financement appuiera l'organisme en ce qui concerne sa mission, à savoir constituer un solide réseau de chercheurs en sciences sociales au Moyen-Orient et ...

  11. Acquisitions massives de terres au Kenya - accroissement des ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Acquisitions massives de terres au Kenya - accroissement des bienfaits pour les collectivités et meilleure reddition de comptes. L'aménagement efficace des terres s'inscrit au coeur même de Vision 2030, la stratégie de planification nationale du Kenya. L'agriculture, l'exploitation des ressources naturelles et le ...

  12. Facile Growth of Multi-twined Au Nanostructures

    Indian Academy of Sciences (India)

    We describe a facile growth of chain-like Au nanostructures and their spontaneous transformation to multi-twined nanostructure using a mild reducing agent bisphenol A (BPA). The growth Au nanostructures involves the chemical reduction of HAuCl4 by BPA in the presence of cetyltrimethylammonium bromide (CTAB) as ...

  13. Lessons learned from AU PSO-missions in Africa

    DEFF Research Database (Denmark)

    Mandrup, Thomas

    The paper deals with the lessons learned from AU's PSO since 2002, and what that entails for the design of future PSO.......The paper deals with the lessons learned from AU's PSO since 2002, and what that entails for the design of future PSO....

  14. The Type II supernovae 2006V and 2006au

    DEFF Research Database (Denmark)

    Taddia, F.; Stritzinger, M. D.; Sollerman, J.

    2012-01-01

    curve evolution similar to that of SN 1987A. At the earliest epochs, SN 2006au also displays an initial dip which we interpret as the signature of the adiabatic cooling phase that ensues shock break-out. SNe 2006V and 2006au are both found to be bluer, hotter and brighter than SN 1987A. Spectra of SNe...

  15. Facile Growth of Multi-twined Au Nanostructures

    Indian Academy of Sciences (India)

    Abstract. We describe a facile growth of chain-like Au nanostructures and their spontaneous transforma- tion to multi-twined nanostructure using a mild reducing agent bisphenol A (BPA). The growth Au nanostruc- tures involves the chemical reduction of HAuCl4 by BPA in the presence of cetyltrimethylammonium bromide.

  16. CO oxidation on Alsbnd Au nano-composite systems

    Science.gov (United States)

    Rajesh, C.; Majumder, C.

    2018-03-01

    Using first principles method we report the CO oxidation behaviour of Alsbnd Au nano-composites in three different size ranges: Al6Au8, Al13Au42 and a periodic slab of Alsbnd Au(1 1 1) surface. The clusters prefer enclosed structures with alternating arrangement of Al and Au atoms, maximising Auδ-sbnd Alδ+ bonds. Charge distribution analysis suggests the charge transfer from Al to Au atoms, corroborated by the red shift in the density of states spectrum. Further, CO oxidation on these nano-composite systems was investigated through both Eley - Rideal and Langmuir Hinshelwood mechanism. While, these clusters interact with O2 non-dissociatively with an elongation of the Osbnd O bond, further interaction with CO led to formation of CO2 spontaneously. On contrary, the CO2 evolution by co-adsorption of O2 and CO molecules has a transition state barrier. On the basis of the results it is inferred that nano-composite material of Alsbnd Au shows significant promise toward effective oxidative catalysis.

  17. Gouvernance et gestion des ressources communes au Vietnam ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Gouvernance et gestion des ressources communes au Vietnam. La subvention permettra au Collège d'agriculture et de foresterie de l'Université de Huê de se pencher sur des questions reliées à la gestion des ressources communes et à la pauvreté dans ... New funding opportunity for gender equality and climate change.

  18. Synthesis and crystal structure of a new Cu3Au-type ternary phase in the Au-In-Pd system: distribution of atoms over crystallographic positions.

    Science.gov (United States)

    Ptashkina, Evgeniya A; Kabanova, Elizaveta G; Tursina, Anna I; Yatsenko, Alexandr V; Kuznetsov, Victor N

    2018-03-01

    A new Cu 3 Au-type ternary phase (τ phase) is found in the AuPd-rich part of the Au-In-Pd system. It has a broad homogeneity range based on extensive (Pd,Au) and (In,Au) replacement, with the composition varying between Au 17.7 In 25.3 Pd 57.0 and Au 50.8 In 16.2 Pd 33.0 . The occupancies of the crystallographic positions were studied by single-crystal X-ray diffraction for three samples of different composition. The sites with m-3m symmetry are occupied by atoms with a smaller scattering power than the atoms located on 4/mmm sites. Two extreme structure models were refined. Within the first, the occupation type changes from (Au,In,Pd) 3 (Pd,In) to (Au,Pd) 3 (In,Pd,Au) with an increase in the Au gross content. For the second model, the occupation type (Au,In,Pd) 3 (Pd,Au) remains essentially unchanged for all Au concentrations. Although the diffraction data do not allow the choice of one of these models, the latter model, where Au substitutes In on 4/mmm sites, seems to be preferable, since it agrees with the fact that the homogeneity range of the τ phase is inclined to the Au corner and provides the same occupation type for all the studied samples of different compositions.

  19. Largely enhanced photocatalytic activity of Au/XS2/Au (X = Re, Mo) antenna-reactor hybrids: charge and energy transfer.

    Science.gov (United States)

    Chen, Kai; Ding, Si-Jing; Luo, Zhi-Jun; Pan, Gui-Ming; Wang, Jia-Hong; Liu, Jia; Zhou, Li; Wang, Qu-Quan

    2018-02-22

    An antenna-reactor hybrid coupling plasmonic antenna with catalytic nanoparticles is a new strategy to optimize photocatalytic activity. Herein, we have rationally proposed a Au/XS 2 /Au (X = Re, Mo) antenna reactor, which has a large Au core as the antenna and small satellite Au nanoparticles as the reactor separated by an ultrathin two-dimensional transition-metal dichalcogenide XS 2 shell (∼2.6 nm). Due to efficient charge transfer across the XS 2 shell as well as energy transfer via coupling of the Au antenna and Au reactor, the photocatalytic activity has been largely enhanced: Au/ReS 2 /Au exhibits a 3.59-fold enhancement, whereas Au/MoS 2 /Au exhibits a 2.66-fold enhancement as compared to that of the sum of the three individual components. The different enhancement in the Au/ReS 2 /Au and Au/MoS 2 /Au antenna-reactor hybrid is related to the competition and cooperation of charge and energy transfer. These results indicate the great potential of the Au/XS 2 /Au antenna-reactor hybrid for the development of highly efficient plasmonic photocatalysts.

  20. and Au nanoparticles for SERS applications

    Directory of Open Access Journals (Sweden)

    Fazio Enza

    2018-01-01

    Full Text Available The morphological and optical properties of noble metal nanoparticles prepared by picosecond laser generated plasmas in water were investigated. First, the ablation efficiency was maximized searching the optimal focusing conditions. The nanoparticle size, measured by Scanning Transmission Electron Microscopy, strongly depends on the laser fluence, keeping fixed the other deposition parameters such as the target to scanner objective distance and laser repetition frequency. STEM images indicate narrow gradients of NP sizes. Hence the optimization of ablation parameters favours a fine tuning of nanoparticles. UV-Visible spectroscopy helped to determine the appropriate laser wavelength to resonantly excite the localized surface plasmon to carry out Surface Enhanced Raman Scattering (SERS measurements. The SERS activity of Ag and Au substrates, obtained spraying the colloids synthesized in water, was tested using crystal violet as a probe molecule. The good SERS performance, observed at excitation wavelength 785 nm, is attributed to aggregation phenomena of nanoparticles sprayed on the support.

  1. La Physique au LHC - Partie I

    CERN Multimedia

    CERN. Geneva

    2004-01-01

    Le LHC devrait permettre l'observation du boson de Higgs et pouvoir lever le voile sur l'un des scénarios de nouvelle physique présentés dans la cours précédent. Ce cours détaillera les perspectives de physique au LHC (découvertes possibles et mesures de précision) ainsi que les méthodes et difficultés expérimentales. L'accent sera mis sur les problèmes liés à la brisure de la symétrie electrofaible. Les possibilités de développement futur à plus haute luminosité et/ou énergie seront également discutées.

  2. Panorama du roman policier au Mexique

    OpenAIRE

    Lara-Alengrin, Alba

    2013-01-01

    Malgré sa diffusion depuis les années quarante par des collections de poche autochtones, le roman policier fut longtemps, au Mexique, un genre méprisé par la critique et les écrivains. Paco Ignacio Taibo II est le premier écrivain mexicain a légitimer et valoriser le genre policier, en particulier le roman noir, qui connaît simultanément un regain d’intérêt critique et commercial. Ce changement de perception vis-à-vis du roman noir s’accompagne de la création d’un nouveau terme pour le qualif...

  3. Jounin Nicolas, Chantier interdit au public

    Directory of Open Access Journals (Sweden)

    Williams Nuytens

    2011-09-01

    Full Text Available Le travail de Nicolas Jounin s’appuie sur des enquêtes de terrain réalisées dans la première moitié des années 2000, en France, dans le monde du bâtiment, sur des chantiers et autour de ceux-ci. Il paraît pour la première fois en 2008 et se présente comme un récit d’observations participantes (tandis que l’auteur aura usé d’autres techniques de recherche au cours de sa thèse de doctorat. Cette option de publier essentiellement une version dynamique du terrain, qui se retrouve dans six des hu...

  4. Interface stress in Au/Ni multilayers

    DEFF Research Database (Denmark)

    Schweitz, K.O.; Böttiger, J.; Chevallier, J.

    2000-01-01

    The effect of intermixing on the apparent interface stress is studied in -textured dc-magnetron sputtered Au/Ni multilayers by use of two methods commonly used for determining interface stress. The method using profilometry and in-plane x-ray diffraction does not take intermixing...... into account and yields an apparent interface stress of -8.46 +/- 0.99 J m(-2). However, observed discrepancies between model calculations and measured high-angle x-ray diffractograms indicate intermixing, and by use of the profilometry and sin(2) psi method the real interface stress value of -2.69 +/- 0.43 J...... m(-2) is found. This method also reveals a significant and systematic change of the stress-free lattice parameter of both constituents as a function of modulation period which is shown to account for the difference between the two findings. The method using in-plane diffraction is thus shown...

  5. Milieux propices au Coffea canephora en Martinique

    OpenAIRE

    Claude, Jean-Philippe

    2018-01-01

    Pionnière pour la culture du café dans la Caraïbe dès 1720, connue pour son légendaire café Arabica, la Martinique n’a plus aucune filière caféière depuis le XIXe siècle. Afin de relancer la culture, un système d'information géographique (SIG) avait été élaboré pour effectuer un zonage pédoclimatique et retrouver les milieux propices au Coffea arabica. Le zonage a abouti à une impossibilité de production pour le futur d’un café Arabica d’excellence, les précipitations représentant un facteur ...

  6. Synthesis, characterization and SERS activity of Au-Ag nanorods

    Science.gov (United States)

    Philip, Daizy; Gopchandran, K. G.; Unni, C.; Nissamudeen, K. M.

    2008-09-01

    The formation mechanism and morphology of Au-Ag bimetallic colloidal nanoparticles depend on the composition. Ag coated Au colloidal nanoparticles have been prepared by deposition of Ag through chemical reduction on performed Au colloid. The composition of the Au 100- x-Ag x particles was varied from x = 0 to 50. The obtained colloids were characterized by UV-vis spectroscopy and transmission electron microscopy (TEM). The Au 80-Ag 20 colloid consists of alloy nanorods with dimension of 25 nm × 100 nm. The activity of these nanorods in surface enhanced Raman spectroscopy (SERS) was checked by using sodium salicylate as an adsorbate probe. Intense SERS bands are observed indicating its usefulness as a SERS substrate in near infrared (NIR) laser excitation.

  7. Spin-polarized ballistic conduction through correlated Au-NiMnSb-Au heterostructures

    KAUST Repository

    Morari, C.

    2017-11-20

    We examine the ballistic conduction through Au-NiMnSb-Au heterostructures consisting of up to four units of the half-metallic NiMnSb in the scattering region, using density functional theory (DFT) methods. For a single NiMnSb unit the transmission function displays a spin polarization of around 50% in a window of 1eV centered around the Fermi level. By increasing the number of layers, an almost complete spin polarization of the transmission is obtained in this energy range. Supplementing the DFT calculations with local electronic interactions, of Hubbard-type on the Mn sites, leads to a hybridization between the interface and many-body states. The significant reduction of the spin polarization seen in the density of states is not apparent in the spin polarization of the conduction electron transmission, which suggests that the hybridized interface and many-body induced states are localized.

  8. Deep sub-threshold ϕ production in Au+Au collisions

    Science.gov (United States)

    Adamczewski-Musch, J.; Arnold, O.; Behnke, C.; Belounnas, A.; Belyaev, A.; Berger-Chen, J. C.; Biernat, J.; Blanco, A.; Blume, C.; Böhmer, M.; Bordalo, P.; Chernenko, S.; Chlad, L.; Deveaux, C.; Dreyer, J.; Dybczak, A.; Epple, E.; Fabbietti, L.; Fateev, O.; Filip, P.; Fonte, P.; Franco, C.; Friese, J.; Fröhlich, I.; Galatyuk, T.; Garzón, J. A.; Gernhäuser, R.; Golubeva, M.; Greifenhagen, R.; Guber, F.; Gumberidze, M.; Harabasz, S.; Heinz, T.; Hennino, T.; Hlavac, S.; Höhne, C.; Holzmann, R.; Ierusalimov, A.; Ivashkin, A.; Kämpfer, B.; Karavicheva, T.; Kardan, B.; Koenig, I.; Koenig, W.; Kolb, B. W.; Korcyl, G.; Kornakov, G.; Kotte, R.; Kühn, W.; Kugler, A.; Kunz, T.; Kurepin, A.; Kurilkin, A.; Kurilkin, P.; Ladygin, V.; Lalik, R.; Lapidus, K.; Lebedev, A.; Lopes, L.; Lorenz, M.; Mahmoud, T.; Maier, L.; Mangiarotti, A.; Markert, J.; Maurus, S.; Metag, V.; Michel, J.; Mihaylov, D. M.; Morozov, S.; Müntz, C.; Münzer, R.; Naumann, L.; Nowakowski, K. N.; Palka, M.; Parpottas, Y.; Pechenov, V.; Pechenova, O.; Petukhov, O.; Pietraszko, J.; Przygoda, W.; Ramos, S.; Ramstein, B.; Reshetin, A.; Rodriguez-Ramos, P.; Rosier, P.; Rost, A.; Sadovsky, A.; Salabura, P.; Scheib, T.; Schuldes, H.; Schwab, E.; Scozzi, F.; Seck, F.; Sellheim, P.; Siebenson, J.; Silva, L.; Sobolev, Yu. G.; Spataro, S.; Ströbele, H.; Stroth, J.; Strzempek, P.; Sturm, C.; Svoboda, O.; Szala, M.; Tlusty, P.; Traxler, M.; Tsertos, H.; Usenko, E.; Wagner, V.; Wendisch, C.; Wiebusch, M. G.; Wirth, J.; Zanevsky, Y.; Zumbruch, P.; Hades Collaboration

    2018-03-01

    We present data on charged kaons (K±) and ϕ mesons in Au(1.23A GeV)+Au collisions. It is the first simultaneous measurement of K- and ϕ mesons in central heavy-ion collisions below a kinetic beam energy of 10A GeV. The ϕ /K- multiplicity ratio is found to be surprisingly high with a value of 0.52 ± 0.16 and shows no dependence on the centrality of the collision. Consequently, the different slopes of the K+ and K- transverse-mass spectra can be explained solely by feed-down, which substantially softens the spectra of K- mesons. Hence, in contrast to the commonly adapted argumentation in literature, the different slopes do not necessarily imply diverging freeze-out temperatures of K+ and K- mesons caused by different couplings to baryons.

  9. Azimuthal Anisotropy in U +U and Au +Au Collisions at RHIC

    Science.gov (United States)

    Adamczyk, L.; Adkins, J. K.; Agakishiev, G.; Aggarwal, M. M.; Ahammed, Z.; Alekseev, I.; Alford, J.; Aparin, A.; Arkhipkin, D.; Aschenauer, E. C.; Averichev, G. S.; Banerjee, A.; Bellwied, R.; Bhasin, A.; Bhati, A. K.; Bhattarai, P.; Bielcik, J.; Bielcikova, J.; Bland, L. C.; Bordyuzhin, I. G.; Bouchet, J.; Brandin, A. V.; Bunzarov, I.; Burton, T. P.; Butterworth, J.; Caines, H.; Calderón de la Barca Sánchez, M.; Campbell, J. M.; Cebra, D.; Cervantes, M. C.; Chakaberia, I.; Chaloupka, P.; Chang, Z.; Chattopadhyay, S.; Chen, J. H.; Chen, X.; Cheng, J.; Cherney, M.; Christie, W.; Contin, G.; Crawford, H. J.; Das, S.; De Silva, L. C.; Debbe, R. R.; Dedovich, T. G.; Deng, J.; Derevschikov, A. A.; di Ruzza, B.; Didenko, L.; Dilks, C.; Dong, X.; Drachenberg, J. L.; Draper, J. E.; Du, C. M.; Dunkelberger, L. E.; Dunlop, J. C.; Efimov, L. G.; Engelage, J.; Eppley, G.; Esha, R.; Evdokimov, O.; Eyser, O.; Fatemi, R.; Fazio, S.; Federic, P.; Fedorisin, J.; Feng, Z.; Filip, P.; Fisyak, Y.; Flores, C. E.; Fulek, L.; Gagliardi, C. A.; Garand, D.; Geurts, F.; Gibson, A.; Girard, M.; Greiner, L.; Grosnick, D.; Gunarathne, D. S.; Guo, Y.; Gupta, S.; Gupta, A.; Guryn, W.; Hamad, A.; Hamed, A.; Haque, R.; Harris, J. W.; He, L.; Heppelmann, S.; Heppelmann, S.; Hirsch, A.; Hoffmann, G. W.; Hofman, D. J.; Horvat, S.; Huang, H. Z.; Huang, B.; Huang, X.; Huck, P.; Humanic, T. J.; Igo, G.; Jacobs, W. W.; Jang, H.; Jiang, K.; Judd, E. G.; Kabana, S.; Kalinkin, D.; Kang, K.; Kauder, K.; Ke, H. W.; Keane, D.; Kechechyan, A.; Khan, Z. H.; Kikola, D. P.; Kisel, I.; Kisiel, A.; Koetke, D. D.; Kollegger, T.; Kosarzewski, L. K.; Kotchenda, L.; Kraishan, A. F.; Kravtsov, P.; Krueger, K.; Kulakov, I.; Kumar, L.; Kycia, R. A.; Lamont, M. A. C.; Landgraf, J. M.; Landry, K. D.; Lauret, J.; Lebedev, A.; Lednicky, R.; Lee, J. H.; Li, W.; Li, Y.; Li, C.; Li, Z. M.; Li, X.; Li, X.; Lisa, M. A.; Liu, F.; Ljubicic, T.; Llope, W. J.; Lomnitz, M.; Longacre, R. S.; Luo, X.; Ma, L.; Ma, R.; Ma, Y. G.; Ma, G. L.; Magdy, N.; Majka, R.; Manion, A.; Margetis, S.; Markert, C.; Masui, H.; Matis, H. S.; McDonald, D.; Meehan, K.; Minaev, N. G.; Mioduszewski, S.; Mohanty, B.; Mondal, M. M.; Morozov, D. A.; Mustafa, M. K.; Nandi, B. K.; Nasim, Md.; Nayak, T. K.; Nigmatkulov, G.; Nogach, L. V.; Noh, S. Y.; Novak, J.; Nurushev, S. B.; Odyniec, G.; Ogawa, A.; Oh, K.; Okorokov, V.; Olvitt, D. L.; Page, B. S.; Pak, R.; Pan, Y. X.; Pandit, Y.; Panebratsev, Y.; Pawlik, B.; Pei, H.; Perkins, C.; Peterson, A.; Pile, P.; Planinic, M.; Pluta, J.; Poljak, N.; Poniatowska, K.; Porter, J.; Posik, M.; Poskanzer, A. M.; Pruthi, N. K.; Putschke, J.; Qiu, H.; Quintero, A.; Ramachandran, S.; Raniwala, S.; Raniwala, R.; Ray, R. L.; Ritter, H. G.; Roberts, J. B.; Rogachevskiy, O. V.; Romero, J. L.; Roy, A.; Ruan, L.; Rusnak, J.; Rusnakova, O.; Sahoo, N. R.; Sahu, P. K.; Sakrejda, I.; Salur, S.; Sandweiss, J.; Sarkar, A.; Schambach, J.; Scharenberg, R. P.; Schmah, A. M.; Schmidke, W. B.; Schmitz, N.; Seger, J.; Seyboth, P.; Shah, N.; Shahaliev, E.; Shanmuganathan, P. V.; Shao, M.; Sharma, B.; Sharma, M. K.; Shen, W. Q.; Shi, S. S.; Shou, Q. Y.; Sichtermann, E. P.; Sikora, R.; Simko, M.; Skoby, M. J.; Smirnov, D.; Smirnov, N.; Song, L.; Sorensen, P.; Spinka, H. M.; Srivastava, B.; Stanislaus, T. D. S.; Stepanov, M.; Stock, R.; Strikhanov, M.; Stringfellow, B.; Sumbera, M.; Summa, B. J.; Sun, X.; Sun, X. M.; Sun, Z.; Sun, Y.; Surrow, B.; Svirida, D. N.; Szelezniak, M. A.; Tang, Z.; Tang, A. H.; Tarnowsky, T.; Tawfik, A. N.; Thomas, J. H.; Timmins, A. R.; Tlusty, D.; Tokarev, M.; Trentalange, S.; Tribble, R. E.; Tribedy, P.; Tripathy, S. K.; Trzeciak, B. A.; Tsai, O. D.; Ullrich, T.; Underwood, D. G.; Upsal, I.; Van Buren, G.; van Nieuwenhuizen, G.; Vandenbroucke, M.; Varma, R.; Vasiliev, A. N.; Vertesi, R.; Videbaek, F.; Viyogi, Y. P.; Vokal, S.; Voloshin, S. A.; Vossen, A.; Wang, F.; Wang, Y.; Wang, H.; Wang, J. S.; Wang, Y.; Wang, G.; Webb, G.; Webb, J. C.; Wen, L.; Westfall, G. D.; Wieman, H.; Wissink, S. W.; Witt, R.; Wu, Y. F.; Xiao, Z.; Xie, W.; Xin, K.; Xu, Y. F.; Xu, N.; Xu, Z.; Xu, Q. H.; Xu, H.; Yang, Y.; Yang, Y.; Yang, C.; Yang, S.; Yang, Q.; Ye, Z.; Yepes, P.; Yi, L.; Yip, K.; Yoo, I.-K.; Yu, N.; Zbroszczyk, H.; Zha, W.; Zhang, X. P.; Zhang, J. B.; Zhang, J.; Zhang, Z.; Zhang, S.; Zhang, Y.; Zhang, J. L.; Zhao, F.; Zhao, J.; Zhong, C.; Zhou, L.; Zhu, X.; Zoulkarneeva, Y.; Zyzak, M.; STAR Collaboration

    2015-11-01

    Collisions between prolate uranium nuclei are used to study how particle production and azimuthal anisotropies depend on initial geometry in heavy-ion collisions. We report the two- and four-particle cumulants, v2{2 } and v2{4 }, for charged hadrons from U +U collisions at √{sNN }=193 GeV and Au +Au collisions at √{sNN}=200 GeV . Nearly fully overlapping collisions are selected based on the energy deposited by spectators in zero degree calorimeters (ZDCs). Within this sample, the observed dependence of v2{2 } on multiplicity demonstrates that ZDC information combined with multiplicity can preferentially select different overlap configurations in U +U collisions. We also show that v2 vs multiplicity can be better described by models, such as gluon saturation or quark participant models, that eliminate the dependence of the multiplicity on the number of binary nucleon-nucleon collisions.

  10. On Productions of Net-Baryons in Central Au-Au Collisions at RHIC Energies

    Directory of Open Access Journals (Sweden)

    Ya-Hui Chen

    2015-01-01

    Full Text Available The transverse momentum and rapidity distributions of net-baryons (baryons minus antibaryons produced in central gold-gold (Au-Au collisions at 62.4 and 200 GeV are analyzed in the framework of a multisource thermal model. Each source in the model is described by the Tsallis statistics to extract the effective temperature and entropy index from the transverse momentum distribution. The two parameters are used as input to describe the rapidity distribution and to extract the rapidity shift and contribution ratio. Then, the four types of parameters are used to structure some scatter plots of the considered particles in some three-dimensional (3D spaces at the stage of kinetic freeze-out, which are expected to show different characteristics for different particles and processes. The related methodology can be used in the analyses of particle production and event holography, which are useful for us to better understand the interacting mechanisms.

  11. Collective effects in Au(100-800 AMeV) + Au semi-central collisions

    International Nuclear Information System (INIS)

    Crochet, P.

    1996-01-01

    The present work has been carried out in the framework of the experimental program of the FOPI collaboration. It is devoted to a systematic study of the different forms of collective expansion of nuclear matter in semi-central Au+Au collisions at incident energies ranging from 100 AMeV to 800 AMeV. The aim is to investigate the influence of compressional effects, momentum dependence of the nuclear interaction and nucleon-nucleon cross section on the observed phenomena. Important changes in the reaction mechanisms are evidenced, in particular at low incident energies where one observes, on the one hand, a transition from an enhanced in-plane emission to a preferential out-of-plane emission pattern and, on the other hand, a strong reduction of the directed in-plane component. Experimental results are compared to the predictions of the Quantum Molecular Dynamics (QMD) model for different parametrizations of the nuclear interaction. (author)

  12. Biosynthesis of Au, Ag and Au-Ag nanoparticles using edible mushroom extract

    Science.gov (United States)

    Philip, Daizy

    2009-07-01

    Integration of green chemistry principles to nanotechnology is one of the key issues in nanoscience research. There is growing need to develop environmentally benign metal nanoparticle synthesis process that do not use toxic chemicals in the synthesis protocols to avoid adverse effects in medical applications. Here, it is a report on extracellular synthesis method for the preparation of Au, Ag and Au-Ag nanoparticles in water, using the extract of Volvariella volvacea, a naturally occurring edible mushroom, as reducing and protecting agents. Gold nanoparticles of different sizes (20-150 nm) and shapes from triangular nanoprisms to nearly spherical and hexagonal are obtained by this novel method. The size and shape of gold nanoparticles are also found to depend on temperature of the extract. The silver nanoparticles are spherical with size ˜15 nm. There is increased productivity of nanoparticles as shown by sharp and intense surface plasmon resonance bands for the nanoparticles prepared using an excess of the extract. The Au-Ag nanoparticles prepared by co-reduction has only one plasmon band due to alloying of the constituents. All the synthesized nanoparticles are found to be photoluminescent and are highly crystalline as shown by SAED and XRD patterns with fcc phase oriented along the (1 1 1) plane. FTIR measurements were carried out to identify the possible biomolecules responsible for capping and efficient stabilization of the nanoparticles. It is found that Au nanoparticles are bound to proteins through free amino groups and silver nanoparticles through the carboxylate group of the amino acid residues. The position and intensity of the emission band is found to depend on composition of the nanoparticles indicating the possible use in therapeutic applications.

  13. Au Kenya, des oiseaux nuisent à une culture adaptée au climat ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    23 août 2013 ... KITUI, Kenya (Thomson Reuters Foundation) – Le gadam, une variété de sorgho à croissance rapide résistante à la sécheresse, a été introduit au Kenya comme solution d'adaptation aux changements climatiques. Or, il se trouve que le gadam comporte un inconvénient imprévu : les oiseaux sauvages ...

  14. Les Modalites Evolutives Du Zona Au Cours De L\\'infection A Vih Au ...

    African Journals Online (AJOL)

    Introduction et But Peu d\\'informations sont disponibles sur les complications du zona et la prise en charge globale de cette maladie chez les patients VIH-positifs dans les pays d\\'Afrique sub Saharienne à l\\'instar du Cameroun. Le taux de séroprévalence du VIH dans la population adulte générale au Cameroun à été ...

  15. Retinopathie au cours des avc au chu Sylvanus Olympio de Lome ...

    African Journals Online (AJOL)

    ophtalmoscopie directe a été réalisé. Les signes ont été analysés suivant la classification de la rétinopathie hypertensive de Keith et Wagener. Résultats : Les signes retrouvés au fond d'oeil sont ceux d'une rétinopathie HTA suivant répartis comme suit ...

  16. Devenir De l'azote de L'engrais enrichi au n applique au tournesol ...

    African Journals Online (AJOL)

    L'utilisation de I' azote de I' engrais par la culture de toumesol a ete appreciee par Ia determination du coefficient d'utilisation apparent (CUA) estime par Ia methode de difference et du coefficient d'utilisation reel (CUR) estime par Ia methode isotopique. 80 kg N ha-1 a 4.87% d'atomes en exces de 15N ont ete appliques au ...

  17. Autopistas: AU-1 25 de Mayo y AU-6 Perito Moreno

    Directory of Open Access Journals (Sweden)

    Editorial, Equipo

    1981-02-01

    Full Text Available Highways AU-1 and AU-6, approximately 17 km. long, were constructed for the purpose of solving the serious traffic problems in Buenos Aires, a city of nine million inhabitants and an evergrowing number of cars. A computer program was created for the design based on the geometric shape of the highway and the position of the supports. Using this, all elements composing the structure were calculated and the framework was sized. This programme made it possible to complete a stretch of 150 metres per week. The very rapid construction was carried out through self-supporting arches made of metallic beams held in place by brackets. The brackets were fitted in specially designed grooves in the major supports of the highway.

    Las autopistas AU-1 y AU-6, con una longitud aproximada de 17 km, se realizaron con objeto de resolver el grave problema de infraestructura vial del Municipio de Buenos Aires, ciudad de nueve millones de habitantes y con un parque de vehículos en rápido crecimiento. Para el proyecto se creó un programa de ordenador con el que, partiendo de la definición geométrica de la autopista y de la posición de las pilas, se calculan todos los elementos que componen la estructura y se dimensionan las armaduras. Este programa permitió proyectar un tramo (150 m por semana. La construcción, a un ritmo muy rápido, se llevó a cabo mediante cimbras autoportantes compuestas por vigas metálicas apoyadas sobre ménsulas, las cuales a su vez apoyan en unos nichos dejados en las pilas.

  18. Ohmic Contacts on Diamond by R. F. Sputtering and Ti-Au Metallization

    Science.gov (United States)

    Wang, Y. Y.; Zhen, C. M.; Yan, Z. J.; Guo, Q. F.; Chen, G. H.

    Low resistance ohmic contacts were fabricated on diamond films. A high boron concentration (~1020cm-3) was obtained on the surface by ion implantation. The initial film of Ti (20nm) followed by Au (100nm) was deposited by r. f. sputtering. I-V measurements showed that the as-deposited contacts were ohmic. Upon annealing, the ohmic characteristics of the contacts were improved significantly. The specific contacts resistivity decreased from 6.2 × 10-3 to 1.2 × 10-6Ωcm2 as a result of post-deposition annealing. The X-ray photoelectron spectroscopy analysis indicated the formation of titanium carbide at the Ti/diamond interface in the as-deposited and annealed states. A low oxygen concentration was observed.

  19. Cationic AuIII versus AuI : Catalyst-Controlled Divergent Reactivity of Alkyne-Tethered Lactams.

    Science.gov (United States)

    Alcaide, Benito; Almendros, Pedro; Cembellín, Sara; Fernández, Israel; Martínez Del Campo, Teresa

    2017-03-02

    Switchable reactivity through cationic gold-based catalyst control built on the oxidation state, namely cationic Au III versus Au I , has been achieved in the direct functionalization of 2-azetidinone-tethered alkynyl indoles. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Lateral etching of core-shell Au@Metal nanorods to metal-tipped au nanorods with improved catalytic activity.

    Science.gov (United States)

    Guo, Xia; Zhang, Qiao; Sun, Yanghui; Zhao, Qing; Yang, Jian

    2012-02-28

    Selective growth/etching of hybrid materials is very important for the rational synthesis of hierarchical structures and precise modulation of their physical properties. Here, the lateral etching of the core-shell Au@Ag nanorods is achieved by FeCl(3) at room temperature, producing a number of dumbbell-like Ag-tipped Au nanorods. This selective etching at the side of the core-shell nanorods is attributed to the increased reactivity of the side facets, due to less surface passivation of cetyltrimethylammonium bromide. The similar synthetic strategy has also been demonstrated to be successful for the Pd-tipped Au nanorods that have not been reported before, indicating the great potential of this selective etching. The Ag-tipped Au nanorods are examined as a catalyst for the reduction of p-nitrophenol at room temperature. The Ag-tipped Au nanorods exhibit a higher catalytic activity than Au nanorods and core-shell Au@Ag nanorods, which could be attributed to the electronic effect and the unique structure in the Ag-tipped Au nanorods.

  1. Measurements of higher order flow harmonics in Au + Au collisions at √ sNN=200 GeV

    Czech Academy of Sciences Publication Activity Database

    Adare, A.; Afanasiev, S.; Aidala, C.; Mikeš, P.; Růžička, Pavel; Tomášek, Lukáš; Vrba, Václav

    2011-01-01

    Roč. 107, č. 25 (2011), "252301-1"-"252301-7" ISSN 0031-9007 Institutional research plan: CEZ:AV0Z10100502 Keywords : PHENIX detector * Au + Au collisions * nuclear collisions * flow harmonics Subject RIV: BF - Elementary Particles and High Energy Physics Impact factor: 7.370, year: 2011

  2. Direct virtual photon production in Au plus Au collisions at root s(NN)=200 GeV STAR Collaboration

    Czech Academy of Sciences Publication Activity Database

    Adamczyk, L.; Bielčík, J.; Bielčíková, Jana; Chaloupka, P.; Federič, Pavol; Federičová, P.; Harlenderová, A.; Kocmánek, Martin; Kvapil, J.; Lidrych, J.; Rusňák, Jan; Rusňáková, O.; Šaur, Miroslav; Šimko, Miroslav; Šumbera, Michal; Trzeciak, B. A.

    2017-01-01

    Roč. 770, JUL (2017), s. 451-458 ISSN 0370-2693 R&D Projects: GA MŠk LG15001; GA MŠk LM2015054 Institutional support: RVO:61389005 Keywords : STAR collaboration * transverse mementum * Au Au collisions Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders OBOR OECD: Nuclear physics Impact factor: 4.807, year: 2016

  3. Gold surfaces and nanoparticles are protected by Au(0)-thiyl species and are destroyed when Au(I)-thiolates form

    DEFF Research Database (Denmark)

    Reimers, Jeffrey R.; Ford, Michael J.; Halder, Arnab

    2016-01-01

    The synthetic chemistry and spectroscopy of sulfur-protected gold surfaces and nanoparticles is analyzed, indicating that the electronic structure of the interface is Au(0)-thiyl, with Au(I)-thiolates identified as high-energy excited surface states. Density-functional theory indicates that it is...

  4. Au@AuPt nanoparticles embedded in B-doped graphene: A superior electrocatalyst for determination of rutin

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Xianlan; Yang, Guangming; Feng, Shaoping; Shi, Ling; Huang, Zhaolong [School of Science, Honghe University (China); Key Laboratory of Natural Pharamaceutical & Chemical Biology of Yunnan Province Mengzi, Yunnan 661100 (China); Pan, Haibo [Fujian Key Lab of Medical Instrument & Pharmaceutical Technology, Yishan Campus, Fuzhou University, Fuzhou, Fujian 350002 (China); Liu, Wei, E-mail: liuwei4728@126.com [School of Science, Honghe University (China); Key Laboratory of Natural Pharamaceutical & Chemical Biology of Yunnan Province Mengzi, Yunnan 661100 (China)

    2017-04-30

    Highlights: • The formation of B-doped graphene (BG) with high content of a total B species use hydrothermal method with B{sub 2}O{sub 3} as reducing agent and boron source. • BG was exfoliated into monolayer nanosheet impregnated by Au@AuPt NPs because B atom creates a net positive charge to facilitate NPs adsorption. • The dispersed carboxyl units of BG can form hydrogen bonding with the phenolic hydroxyl groups of rutin, making more rutin participate in reaction. • Au@AuPt NPs can form charge accumulation or valence change on prominent part of the surface, improving the catalytic effect to rutin. • More electroactive sites were generated by doping B atoms into graphene structures, which act as multidimensional electron transport pathways. - Abstract: A hydrothermal approach was used to prepare B-doped graphene with B{sub 2}O{sub 3} as reductant and boron source. Results reveal that the boron atoms have been successfully embedded into graphene with a high content of a total B species (2.85 at.%). Then, B-doped graphene was exfoliated further into monolayer nanosheet by impregnating Au@AuPt core-shell nanoparticles (Au@AuPt NPs) because boron atom creates a net positive charge, which facilitates Au@AuPt NPs adsorption to form Au@AuPt NPs/B-doped graphene hybrid nanocatalysts. After that, the Au@AuPt NPs/B-doped hybrid suspension was dropped on glassy carbon electrode for sensing rutin. In this way, the dispersed carboxyl units of B-doped graphene can form hydrogen bonding with the phenolic hydroxyl groups of rutin, making rutin enrich easily on modified electrode surface to enhance the electrochemical response. At the same time, its electrochemical mechanism on the modified electrode was elucidated using cyclic voltammetry. It was found that its electrochemical behavior on modified electrode surface was a surface-controlled quasi-reversible process, and the charge transfer coefficient (α) and electron transfer number (n) were 0.296 and 2, respectively

  5. Antimicrobial Resistance

    Science.gov (United States)

    ... least 10 countries (Australia, Austria, Canada, France, Japan, Norway, Slovenia, South Africa, Sweden and the United Kingdom ... plan Global report on surveillance Country situation analysis Policy to combat antimicrobial resistance More on antimicrobial resistance ...

  6. Influence of Cu, Au and Ag on structural and surface properties of bioactive coatings based on titanium.

    Science.gov (United States)

    Wojcieszak, D; Mazur, M; Kalisz, M; Grobelny, M

    2017-02-01

    In this work influence of copper, silver and gold additives on structural and surface properties of biologically active thin films based on titanium have been described. Coatings were prepared by magnetron sputtering method. During each process metallic discs (targets) - Ti and the additive (Cu, Ag or Au) were co-sputtered in argon atmosphere. Structural investigation of as-deposited coatings was performed with the aid of XRD and SEM/EDS method. It was found that all prepared thin films were homogenous. Addition of Cu, Ag and Au resulted in nanocrystalline structure. Moreover, influence of these additives on hardness and antibacterial activity of titanium coatings was also studied. Ti-Cu, Ti-Ag and Ti-Au films had lower hardness as-compared to Ti. According to AAS results the difference of their activity was related to the ion migration process. It was found that Ti-Ag and Ti-Au coatings had biocidal effect related to direct contact of their surface with microorganisms. In the case of Ti-Cu antimicrobial activity had direct and indirect nature due to efficient ion migration process from the film surface to the surrounding environment. Functional features of coatings such as wettability and corrosion resistance were also examined and included in the comprehensive analysis. Copyright © 2016 Elsevier B.V. All rights reserved.

  7. Enhanced middle-infrared light transmission through Au/SiO(x)N(y)/Au aperture arrays.

    Science.gov (United States)

    Xiao, Gongli; Yao, Xiang; Ji, Xinming; Zhou, Jia; Bao, Zongming; Huang, Yiping

    2011-12-01

    The enhanced middle-infrared light transmission through Au/SiO(x)N(y)/Au aperture arrays by changing the refractive index and the thickness of a dielectric layer was studied experimentally. The results indicated that the transmission spectra was highly dependent on the refractive index and the thickness of SiO(x)N(y). We found that the transmission peaks redshifted regularly along with the refractive index from 1.6 to 1.8, owing to the role of surface plasmon polaritons (SPP) coupling in the Au/SiO(x)N(y)/Au cascaded metallic structure. Simultaneously, a higher transmission efficiency and narrower transmission peak was obtained in Au/SiO2.1N0.3/Au cascaded metallic structure with small refractive index (1.6) than in Au/SiO0.6N1/Au cascaded metallic structure with large refractive index (1.8). When the thickness of SiO(x)N(y) changes from 0.2 to 0.4 microm, the shape of transmission spectra exhibits a large change. It was found that a higher transmission efficiency and narrower transmission peak was obtained in Au/SiO(x)N(y)/Au cascaded metallic structure with a thin dielectric film (0.2 microm), with the increase of SiO(x)N(y) film's thickness, the transmission peak gradually widened and disappeared finally. This effect is useful in applications of biochemical sensing and tunable integrated plasmonic devices in the middle-infrared region.

  8. Electron transfer at the contact between Al electrode and gold nanoparticles of polymer: Nanoparticle resistive switching devices studied by alternating current impedance spectroscopy

    International Nuclear Information System (INIS)

    Ouyang, Jianyong

    2013-01-01

    Electron transfer at the contact between an Al electrode and Au nanoparticles of polymer:nanoparticle devices is studied by ac impedance spectroscopy. The devices have a polystyrene layer embedded with Au nanoparticles capped with conjugated 2-naphthalenethiol sandwiched between Al and MoO 3 /Al electrodes, and they exhibit electrode-sensitive resistive switches. The devices in the pristine or high resistance state have high capacitance. The capacitance decreases after the devices switch to a low resistance state by a voltage scan. The change in the capacitance is attributed to the voltage-induced change on the electronic structure of the contact between the Al electrode and Au nanoparticles

  9. Drug Resistance

    Science.gov (United States)

    ... infected with a drug-resistant strain of HIV. Drug-resistance testing results are used to decide which HIV medicines to include in a person’s first HIV regimen. After treatment is started, drug-resistance testing is repeated if ...

  10. SORPTION OF Au(III BY Saccharomyces cerevisiae BIOMASS

    Directory of Open Access Journals (Sweden)

    Amaria Amaria

    2010-07-01

    Full Text Available Au(III sorption by S. cerevisiae biomass extracted from beer waste industry was investigated. Experimentally, the sorption was conducted in batch method. This research involved five steps: 1 identification the functional groups present in the S. cerevisiae biomass by infrared spectroscopic technique, 2 determination of optimum pH, 3 determination of the sorption capacity and energy, 4 determination of the sorption type by conducting desorption of sorbed Au(III using specific eluents having different desorption capacity such as H2O (van der Waals, KNO3 (ion exchange, HNO3 (hydrogen bond, and tiourea (coordination bond, 5 determination of effective eluents in Au(III desorption by partial desorption of sorbed Au(III using thiourea, NaCN and KI. The remaining Au(III concentrations in filtrate were analyzed using Atomic Absorption Spectrophotometer. The results showed that: 1 Functional groups of S. cerevisiae biomass that involved in the sorption processes were hydroxyl (-OH, carboxylate (-COO- and amine (-NH2, 2 maximum sorption was occurred at pH 4, equal to 98.19% of total sorption, 3 The sorption capacity of biomass was 133.33 mg/g (6.7682E-04 mol/g and was involved sorption energy 23.03 kJ mol-1, 4 Sorption type was dominated by coordination bond, 5 NaCN was effective eluent to strip Au(III close to 100%.   Keywords: sorption, desorption, S. cerevisiae biomass, Au(III

  11. Theoretical studies of acrolein hydrogenation on Au20 nanoparticle

    Science.gov (United States)

    Li, Zhe; Chen, Zhao-Xu; He, Xiang; Kang, Guo-Jun

    2010-05-01

    Gold nanoparticles play a key role in catalytic processes. We investigated the kinetics of stepwise hydrogenation of acrolein on Au20 cluster model and compared with that on Au(110) surface. The rate-limiting step barrier of CC reduction is about 0.5 eV higher than that of CO hydrogenation on Au(110) surface. On Au20 nanoparticle, however, the energy barrier of the rate-determining step for CC hydrogenation turns out to be slightly lower than the value for the CO reduction. The selectivity difference on the two substrate models are attributed to different adsorption modes of acrolein: via the CC on Au20, compared to through both CC and CO on Au(110). The preference switch implies that the predicted selectivity of competitive hydrogenation depends on substrate model sensitively, and particles with more low-coordinated Au atoms than flat surfaces are favorable for CC hydrogenation, which is in agreement with experimental result.

  12. Elastographie et retournement temporel des ondes de cisaillement : application à l'imagerie des solides mous

    OpenAIRE

    Brum, Javier

    2012-01-01

    The interaction between wave and matter has long been studied in Physics. In particular, regarding medical applications, wave propagation through the human body resulted in several imaging modalities, each of which uses a specific type of wave linked to a given physical property. The elasticity of soft biological tissues is directly linked to its shear wave speed. Thus, in Elastography, shear waves are tracked for non-invasive assessment of the mechanical properties of soft tissues. In this c...

  13. Facile synthesis of Ag nanocubes and Au nanocages.

    Science.gov (United States)

    Skrabalak, Sara E; Au, Leslie; Li, Xingde; Xia, Younan

    2007-01-01

    This protocol describes a method for the synthesis of Ag nanocubes and their subsequent conversion into Au nanocages via the galvanic replacement reaction. The Ag nanocubes are prepared by a rapid (reaction time nanocubes. With this method, Ag nanocubes can be prepared and isolated for use within approximately 3 h. The Ag nanocubes can then serve as sacrificial templates for the preparation of Au nanocages, with a method for their preparation also described herein. The procedure for Au nanocage preparation and isolation requires approximately 5 h.

  14. Insuffisance renale et infection au vih : Aspects epidemiologique ...

    African Journals Online (AJOL)

    But : Déterminer le profil épidémiologique, clinique et évolutif des personnes séropositives au VIH (PVVIH) présentant une insuffisance rénale (IR) hospitalisées en réanimation médicale au CHU Tokoin de Lomé. Méthodologie : Il s'est agit d'une étude rétrospective concernant les patients séropositives au VIH présentant ...

  15. Chirurgie endoscopique de l'appareil urinaire au CHU Sylvanus ...

    African Journals Online (AJOL)

    Le but de cette étude étant de souligner les insuffisances et les points forts de cette technique au plan national puis d'accroître cette spécificité chirurgicale très bénéfique, au plan économie et de durée de séjour réduit pour la prise en charge des patients, malgré le système d'entretien énorme sans cesse croissant au plan ...

  16. Sensitized mass change detection using Au nanoporous electrode for biosensing

    Science.gov (United States)

    Asai, Naoto; Terasawa, Hideaki; Shimizu, Tomohiro; Shingubara, Shoso; Ito, Takeshi

    2017-06-01

    Nanostructured Au was obtained on an electrode of a quartz crystal microbalance (QCM) chip by anodization in an oxalic acid solution. The effective surface area was expanded by these nanostructures and evaluated by electrochemical measurement, scanning electron microscopy (SEM), and atomic force microscopy (AFM). Several morphologies, such as a nanosphere and a spongy structure, were observed under various anodic conditions. We demonstrated that a QCM chip with an anodized Au electrode was effective in biosensing because of its large surface area. The frequency shift corresponding to an antigen-antibody reaction improved on a Au nanosphere electrode compared with a flat surface electrode and spongy structure.

  17. Structural, electronic and magnetic properties of Au-based monolayer derivatives in honeycomb structure

    Energy Technology Data Exchange (ETDEWEB)

    Kapoor, Pooja, E-mail: pupooja16@gmail.com; Sharma, Munish; Ahluwalia, P. K. [Physics Department, Himachal Pradesh University, Shimla, Himachal Pradesh, India 171005 (India); Kumar, Ashok [Centre for Physical Sciences, School of Basic and Applied Sciences, Central University of Punjab, Bathinda, India, 151001 (India)

    2016-05-23

    We present electronic properties of atomic layer of Au, Au{sub 2}-N, Au{sub 2}-O and Au{sub 2}-F in graphene-like structure within the framework of density functional theory (DFT). The lattice constant of derived monolayers are found to be higher than the pristine Au monolayer. Au monolayer is metallic in nature with quantum ballistic conductance calculated as 4G{sub 0}. Similarly, Au{sub 2}-N and Au{sub 2}-F monolayers show 4G{sub 0} and 2G{sub 0} quantum conductance respectively while semiconducting nature with calculated band gap of 0.28 eV has been observed for Au{sub 2}-O monolayer. Most interestingly, half metalicity has been predicted for Au{sub 2}-N and Au{sub 2}-F monolayers. Our findings may have importance for the application of these monolayers in nanoelectronic and spintronics.

  18. Acceptor-compensated charge transport and surface chemical reactions in Au-implanted SnO₂ nanowires.

    Science.gov (United States)

    Katoch, Akash; Sun, Gun-Joo; Choi, Sun-Woo; Hishita, Shunichi; Kulish, Vadym V; Wu, Ping; Kim, Sang Sub

    2014-04-09

    A new deep acceptor state is identified by density functional theory calculations, and physically activated by an Au ion implantation technique to overcome the high energy barriers. And an acceptor-compensated charge transport mechanism that controls the chemical sensing performance of Au-implanted SnO2 nanowires is established. Subsequently, an equation of electrical resistance is set up as a function of the thermal vibrations, structural defects (Au implantation), surface chemistry (1 ppm NO2), and solute concentration. We show that the electrical resistivity is affected predominantly not by the thermal vibrations, structural defects, or solid solution, but the surface chemistry, which is the source of the improved chemical sensing. The response and recovery time of chemical sensing is respectively interpreted from the transport behaviors of major and minor semiconductor carriers. This acceptor-compensated charge transport mechanism provides novel insights not only for sensor development but also for research in charge and chemical dynamics of nano-semiconductors.

  19. Antibiotic Resistance

    DEFF Research Database (Denmark)

    Munck, Christian

    of antimicrobial resistance: (1) adaptive mutations and (2) horizontal acquisition of resistance genes from antibiotic gene reservoirs. By studying the geno- and phenotypic changes of E. coli in response to single and drug-pair exposures, I uncover the evolutionary trajectories leading to adaptive resistance. I......Bacteria can avoid extinction during antimicrobial exposure by becoming resistant. They achieve this either via adaptive mutations or horizontally acquired resistance genes. If resistance emerges in clinical relevant species, it can lead to treatment failure and ultimately result in increasing...... morbidity and mortality as well as an increase in the cost of treatment. Understanding how bacteria respond to antibiotic exposure gives the foundations for a rational approach to counteract antimicrobial resistance. In the work presented in this thesis, I explore the two fundamental sources...

  20. Magnetically separable nanocatalyst with Fe3O4 core and polydopamine-sandwiched-Au-nanocrystals shell.

    Science.gov (United States)

    Zhang, Jianfeng; Fang, Qunling; Duan, Jinyu; Xu, Hongmei; Xu, Hua-Jian; Xuan, Shouhu

    2018-03-16

    This work reports a novel Fe3O4@polydopamine-Au-polydopamine core/shell nanocomposite towards magnetically separable nanocatalyst. Because the polydopamine (PDA) layers sandwiched Au nanocrystals were prepared by a layer-by-layer method, the content of Au could be controlled by varying the Au shell number (such as burger-like Fe3O4@PDA/Au/PDA/Au/PDA). The Fe3O4@PDA/Au/PDA exhibited excellent catalytic activity on reducing the p-Nitrophenol since the substrate could penetrate the PDA shell. Owing to the protection of PDA shell, the Fe3O4@PDA/Au/PDA presented higher cyclability than the Fe3O4@PDA/Au. The activity of Fe3O4@PDA/Au/PDA maintained 95% after 7 cycles, while Fe3O4@PDA/Au was only 61%. The detailed cycling catalytic mechanism was investigated and it was found that the catalytic rate of Fe3O4@PDA/Au/PDA/Au/PDA was faster than Fe3O4@PDA/Au/PDA due to the higher Au content. Interestingly, this method could be extended for other magnetic nanocomposites with two different kinds of noble metal nanocrystals integrated within one particle, such as Fe3O4@PDA/Au/PDA/Ag/PDA and Fe3O4@PDA/Au/PDA/Pd/PDA.

  1. Evaluation of the Olympus AU-510 analyser.

    Science.gov (United States)

    Farré, C; Velasco, J; Ramón, F

    1991-01-01

    The selective multitest Olympus AU-510 analyser was evaluated according to the recommendations of the Comision de Instrumentacion de la Sociedad Española de Quimica Clinica and the European Committee for Clinical Laboratory Standards. The evaluation was carried out in two stages: an examination of the analytical units and then an evaluation in routine work conditions. The operational characteristics of the system were also studied.THE FIRST STAGE INCLUDED A PHOTOMETRIC STUDY: dependent on the absorbance, the inaccuracy varies between +0.5% to -0.6% at 405 nm and from -5.6% to 10.6% at 340 nm; the imprecision ranges between -0.22% and 0.56% at 405 nm and between 0.09% and 2.74% at 340 nm. Linearity was acceptable, apart from a very low absorbance for NADH at 340 nm; and the imprecision of the serum sample pipetter was satisfactory.TWELVE SERUM ANALYTES WERE STUDIED UNDER ROUTINE CONDITIONS: glucose, urea urate, cholesterol, triglycerides, total bilirubin, creatinine, phosphate, iron, aspartate aminotransferase, alanine aminotransferase and gamma-glutamyl transferase.The within-run imprecision (CV%) ranged from 0.67% for phosphate to 2.89% for iron and the between-run imprecision from 0.97% for total bilirubin to 7.06% for iron. There was no carryover in a study of the serum sample pipetter. Carry-over studies with the reagent and sample pipetters shows some cross contamination in the iron assay.

  2. A simple approach for facile synthesis of Ag, anisotropic Au and bimetallic (Ag/Au) nanoparticles using cruciferous vegetable extracts

    International Nuclear Information System (INIS)

    Jacob, Jasmine; Mukherjee, Tulsi; Kapoor, Sudhir

    2012-01-01

    We present a simple and straightforward approach for the synthesis and stabilization of relatively monodisperse Ag, Au and bimetallic (Ag/Au) nanoparticles by using cruciferous vegetable (green/red) extracts by simply adjusting the pH environment in the aqueous medium. The vegetable extracts act both as reducing and capping agents. The monometallic and bimetallic nanoparticles of Ag and Au so obtained were characterized by UV–visible spectroscopy, X-ray diffraction (XRD), dynamic light scattering (DLS) and transmission electron microscopy (TEM). It is shown that red cabbage extract can be used for the preparation of anisotropic Au nanoparticles. The formation of Au anisotropic nanoparticles was found to depend on a number of environmental factors, such as the pH of the reaction medium, reaction time, and initial reactant concentrations. Additionally, it is shown that these extract-stabilized Au and Ag nanoparticles can be used as a seed for preparation of bimetallic Au/Ag nanoparticles. For bimetallic alloy nanoparticles the absorption peak was observed between the two maxima of the corresponding metallic particles. The surface plasmon absorption maxima for bimetallic nanoparticles changed linearly with increasing Au mole ratio content in various alloy compositions. It has been shown that the formation of hollow Au spheres depends on the experimental conditions. - Graphical abstract: TEM image of gold nanoparticles at pH 3.27 formed by red cabbage extract. Highlights: ► First report on the reactivity of the extracts toward metal ions using a spectrophotometric technique. ► Red cabbage extract has better reducing properties than green cabbage extract. ► Red cabbage extract can reduce metal ions at any pH. ► Reduction of metal ions can have important consequences in the study of soil chemistry.

  3. A simple approach for facile synthesis of Ag, anisotropic Au and bimetallic (Ag/Au) nanoparticles using cruciferous vegetable extracts

    Energy Technology Data Exchange (ETDEWEB)

    Jacob, Jasmine; Mukherjee, Tulsi; Kapoor, Sudhir, E-mail: sudhirk@barc.gov.in

    2012-10-01

    We present a simple and straightforward approach for the synthesis and stabilization of relatively monodisperse Ag, Au and bimetallic (Ag/Au) nanoparticles by using cruciferous vegetable (green/red) extracts by simply adjusting the pH environment in the aqueous medium. The vegetable extracts act both as reducing and capping agents. The monometallic and bimetallic nanoparticles of Ag and Au so obtained were characterized by UV-visible spectroscopy, X-ray diffraction (XRD), dynamic light scattering (DLS) and transmission electron microscopy (TEM). It is shown that red cabbage extract can be used for the preparation of anisotropic Au nanoparticles. The formation of Au anisotropic nanoparticles was found to depend on a number of environmental factors, such as the pH of the reaction medium, reaction time, and initial reactant concentrations. Additionally, it is shown that these extract-stabilized Au and Ag nanoparticles can be used as a seed for preparation of bimetallic Au/Ag nanoparticles. For bimetallic alloy nanoparticles the absorption peak was observed between the two maxima of the corresponding metallic particles. The surface plasmon absorption maxima for bimetallic nanoparticles changed linearly with increasing Au mole ratio content in various alloy compositions. It has been shown that the formation of hollow Au spheres depends on the experimental conditions. - Graphical abstract: TEM image of gold nanoparticles at pH 3.27 formed by red cabbage extract. Highlights: Black-Right-Pointing-Pointer First report on the reactivity of the extracts toward metal ions using a spectrophotometric technique. Black-Right-Pointing-Pointer Red cabbage extract has better reducing properties than green cabbage extract. Black-Right-Pointing-Pointer Red cabbage extract can reduce metal ions at any pH. Black-Right-Pointing-Pointer Reduction of metal ions can have important consequences in the study of soil chemistry.

  4. Electrical properties of Au/perylene-monoimide/p-Si Schottky diode

    International Nuclear Information System (INIS)

    Yüksel, Ö.F.; Tuğluoğlu, N.; Gülveren, B.; Şafak, H.; Kuş, M.

    2013-01-01

    Graphical abstract: In this work, we have fabricated an Au/perylene-monoimide (PMI)/p-Si Schottky barrier diode. An emphasis is placed on how electrical and interface characteristics like current–voltage (I–V) variation, ideality factor (n), barrier height (Φ B ) and series resistance (R s ) of Au/PMI/p-Si diode structure change with the temperatures between 100 and 300 K. The temperature dependence of barrier height shows that the Schottky barrier height is inhomogeneous in nature at the interface. Such inhomogeneous behavior was explained on the basis of thermionic emission mechanism by assuming the existence of a Gaussian distribution of barrier heights. -- Highlights: •An Au/perylene-monoimide (PMI)/p-Si Schottky diode having an organic interlayer has been fabricated. •I–V characteristics have been investigated over a wide temperature range 100–300 K. •C–V measurements have been analyzed at room temperature. -- Abstract: In this work, we have fabricated an Au/perylene-monoimide (PMI)/p-Si Schottky barrier diode. We have investigated how electrical and interface characteristics like current–voltage characteristics (I–V), ideality factor (n), barrier height (Φ B ) and series resistance (R s ) of diode change with temperature over a wide range of 100–300 K. Detailed analysis on the electrical properties of structure is performed by assuming the standard thermionic emission (TE) model. Possible mechanisms such as image force lowering, generation–recombination processes and interface states which cause deviations of n values from the unity have been discussed. Cheung–Cheung method is also employed to analysis the current–voltage characteristics and a good agreement is observed between the results. It is shown that the electronic properties of Schottky diode are very sensitive to the modification of perylene-monoimide (PMI) interlayer organic material and also to the temperature. The ideality factor was found to decrease and the barrier

  5. Appui au réseautage et au renforcement des télécentres ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    D'autres activités sont également prévues, notamment de l'encadrement sur le terrain, des ateliers de formation en gestion, des blogues et un site Web proposant tout un éventail de ressources au réseau de télécentres. Le projet doit préparer la création d'un solide regroupement, la Fédération des télécentres du Mali ...

  6. Au cœur des services : les larmes au travail

    OpenAIRE

    Soares, Angelo

    2014-01-01

    Nous avons cru pendant longtemps qu’il était possible de laisser nos émotions à la porte des organisations. Cela simplifie excessivement la complexité et l’hétérogénéité du travail et, par conséquent, on finit par sous-estimer les effets du travail sur la santé. Notre objectif est de comprendre une forme particulière de l’expression des émotions des travailleuses et travailleurs : les larmes au travail. Pour comprendre cette question, nous utilisons une approche qualitative avec les travaille...

  7. Mise au point d'un test in vitro de comportement au sel de quatre ...

    African Journals Online (AJOL)

    L'utilisation d'un porte-greffe résistant à ces conditions apparaît la solution la plus adaptée. Objectifs : Cette étude est la comparaison de comportement de génotypes d'agrumes, en termes de résistance à la salinité in vitro au niveau des cals et des cellules cultivées parallèlement sur milieu liquide et solide. Méthodologie ...

  8. Appui au réseautage et au renforcement des télécentres ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ces derniers auront par ailleurs accès à des outils qui favoriseront les échanges au sujet des problèmes et des défis des télécentres, soit une ligne téléphonique gratuite, dite " ligne verte ", un système de courrier électronique, Yahoo, MSN Messenger, des clavardoirs et un télécopieur. D'autres activités sont également ...

  9. Heterostructured Au/Pd-M (M = Au, Pd, Pt) nanoparticles with compartmentalized composition, morphology, and electrocatalytic activity

    Science.gov (United States)

    Lutz, Patrick S.; Bae, In-Tae; Maye, Mathew M.

    2015-09-01

    The synthesis, processing, and galvanic exchange of three heterostructured nanoparticle systems is described. The surface accessibility and redox potential of a Au/Pd-Ag dumbbell nanoparticle, where a Au/Pd core/shell region, and a silver region make up the domains, was used to prepare the new nanostructures with controlled composition, morphology, and microstructure. Results indicate that the silver domain was particularly susceptible to galvanic displacement, and was exchanged to Au/Pd-M (M = Au, Pd, Pt). Interestingly, the dumbbell morphology remained after exchange, and the silver region was transformed to hollow, parachute, or concentric domains respectively. The morphology and microstructure change was visualized via TEM and HRTEM, and the composition changes were probed via STEM-EDS imaging and XPS. The electrocatalytic activity of the Au/Pd-M towards methanol oxidation was studied, with results indicating that the Au/Pd-Pt nanoparticles had high activity attributed to the porous nature of the platinum domains.The synthesis, processing, and galvanic exchange of three heterostructured nanoparticle systems is described. The surface accessibility and redox potential of a Au/Pd-Ag dumbbell nanoparticle, where a Au/Pd core/shell region, and a silver region make up the domains, was used to prepare the new nanostructures with controlled composition, morphology, and microstructure. Results indicate that the silver domain was particularly susceptible to galvanic displacement, and was exchanged to Au/Pd-M (M = Au, Pd, Pt). Interestingly, the dumbbell morphology remained after exchange, and the silver region was transformed to hollow, parachute, or concentric domains respectively. The morphology and microstructure change was visualized via TEM and HRTEM, and the composition changes were probed via STEM-EDS imaging and XPS. The electrocatalytic activity of the Au/Pd-M towards methanol oxidation was studied, with results indicating that the Au/Pd-Pt nanoparticles had

  10. Evidence for the Diffusion of Au Atoms into the Te UPD Layer Formed on a Au(111) Substrate

    OpenAIRE

    Kawamura, Hiroyuki; Takahasi, Masamitu; Hojo, Nobuhiko; Miyake, Masao; Murase, Kuniaki; Tamura, Kazuhisa; Uosaki, Kohei; Awakura, Yasuhiro; Mizuki, Jun'ichiro; Matsubara, Eiichiro

    2002-01-01

    The structure of a Te layer formed on a Au(111) substrate by underpotential deposition (UPD) in an electrolytic solution has been studied using in situ surface X-ray diffraction technique. The measurements were carried out for a series of samples which were kept at UPD potential for 4 to 59 h. The results revealed that the Te UPD layer is unstable. The top layer is analyzed to consist of the UPD Te atoms and Au atoms which diffuse from the Au(111) substrate. Also, the Te UPD layer does not ha...

  11. Assembling Bare Au Nanoparticles at Positively Charged Templates

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Wenjie; Zhang, Honghu; Kuzmenko, Ivan; Mallapragada, Surya; Vaknin, David

    2016-05-26

    In-situ X-ray reflectivity (XRR) and grazing incidence X-ray small-angle scattering (GISAXS) reveal that unfunctionalized (bare) gold nanoparticles (AuNP) spontaneously adsorb to a cationic lipid template formed by a Langmuir monolayer of DPTAP (1,2-dihexadecanoyl-3-trimethylammonium-propane) at vapor/aqueous interfaces. Analysis of the XRR yields the electron density profile across the chargedinterfaces along the surface normal showing the AuNPs assemble with vertical thickness comparable to the particle size. The GISAXS analysis indicates that the adsorbed mono-particle layer exhibits shortrange in-plane correlations. By contrast, single-stranded DNA-functionalized AuNPs, while attracted to the positively charged surface (more efficiently with the addition of salt to the solution), display less in-plane regular packing compared to bare AuNPs.

  12. Adaptation dans les zones cruciales au regard des changements ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    ) vise à accroître la résilience des populations pauvres dans trois « zones cruciales » au regard des changements climatiques : les bassins hydrographiques, les deltas et les régions semi-arides.

  13. Coexistence of multiple conformations in cysteamine monolayers on Au(111)

    DEFF Research Database (Denmark)

    Zhang, Jingdong; Bilic, A; Reimers, JR

    2005-01-01

    The structural organization, catalytic function, and electronic properties of cysteamine monolayers on Au(111) have been addressed comprehensively by voltammetry, in situ scanning tunneling microscopy (STM) in anaerobic environment, and a priori molecular dynamics (MD) simulation and STM image si...

  14. Particularites des accidents vasculaires cerebraux au Togo et en ...

    African Journals Online (AJOL)

    Particularites des accidents vasculaires cerebraux au Togo et en Afrique noire. M Belo, AAK Balogou, E Goeh-Akue, N Sognigbe, V kumako, M Djibril, KM Guinhouya, K Apetse, D Kombate, S Kinvi, KE Grunitzky ...

  15. Prolonged reorganization of thiol-capped Au nanoparticles layered structures

    Directory of Open Access Journals (Sweden)

    Sarathi Kundu

    2013-09-01

    Full Text Available Prolonged reorganization behaviour of mono-, di-, tri- and multi-layer films of Au nanoparticles prepared by Langmuir-Blodgett method on hydrophobic Si(001 substrates have been studied by using X-ray scattering techniques. Out-of-plane study shows that although at the initial stage the reorganization occurs through the compaction of the films keeping the layered structure unchanged but finally all layered structures modify to monolayer structure. Due to this reorganization the Au density increases within the nanometer thick films. In-plane study shows that inside the reorganized films Au nanoparticles are distributed randomly and the particle size modifies as the metallic core of Au nanoparticles coalesces.

  16. Fe magnetic impurity effect in Au atomic sized conductor

    Energy Technology Data Exchange (ETDEWEB)

    Ienaga, Koichiro; Inagaki, Yuji; Kawae, Tatsuya [Department of Applied Quantum Physics, Kyushu University, Moto-oka, Fukuoka 819-0395 (Japan); Tsujii, Hiroyuki, E-mail: te208276@s.kyushu-u.ac.j [Department of Education, Kanazawa University, Kanazawa, 920-1192 (Japan)

    2010-01-01

    We have studied the electrical conductance in Au nanowire containing 0.07 at.%Fe ions (AuFe nanowire) with mechanically controllable break junction technique to investigate the magnetic impurity effects in the atomic-sized conductance. At room temperature, we observe not only conductance steps at the integer multiples of G{sub 0} = 2e{sup 2}/h, but also steps deviating from them in AuFe nanowire. Moreover, these features persist down to T = 4.2 K. The scattering between the conduction electrons and Fe magnetic ions may lift the spin degeneracy of the transmission probability, which is responsible for the deviation. Zero bias anomaly is observed in the AuFe nanowire with the contact diameter larger than {approx}3 nm in the current-voltage (I-V) measurements at T = 4.2 K, which may be caused by Kondo effect.

  17. Ordered Au Nanodisk and Nanohole Arrays: Fabrication and Applications

    KAUST Repository

    Zheng, Yue Bing

    2010-01-01

    We have utilized nanosphere lithography (NSL) to fabricate ordered Au nanodisk and nanohole arrays on substrates and have studied the localized surface plasmon resonance (LSPR) of the arrays. Through these investigations, we demonstrate that the angle- dependent behavior of the LSPR in the Au nanodisk arrays enables real-time observation of exciton-plasmon couplings. In addition, we show that the NSL-fabricated Au nanohole arrays can be applied as templates for patterning micro-/nanoparticles under capillary force. The unique structural and plasmonic characteristics of the Au nanodisk and nano- hole arrays, as well as the low-cost and high-throughput NSL-based nanofabrication technique, render these arrays excellent platforms for numerous engineering applications. © 2010 by ASME.

  18. Writing and reading antiferromagnetic Mn2Au by Néel spin-orbit torques and large anisotropic magnetoresistance.

    Science.gov (United States)

    Bodnar, S Yu; Šmejkal, L; Turek, I; Jungwirth, T; Gomonay, O; Sinova, J; Sapozhnik, A A; Elmers, H-J; Kläui, M; Jourdan, M

    2018-01-24

    Using antiferromagnets as active elements in spintronics requires the ability to manipulate and read-out the Néel vector orientation. Here we demonstrate for Mn 2 Au, a good conductor with a high ordering temperature suitable for applications, reproducible switching using current pulse generated bulk spin-orbit torques and read-out by magnetoresistance measurements. Reversible and consistent changes of the longitudinal resistance and planar Hall voltage of star-patterned epitaxial Mn 2 Au(001) thin films were generated by pulse current densities of ≃10 7  A/cm 2 . The symmetry of the torques agrees with theoretical predictions and a large read-out magnetoresistance effect of more than ≃6% is reproduced by ab initio transport calculations.

  19. La cholecystite alithiasique, une manifestation inhabituelle au cours ...

    African Journals Online (AJOL)

    Le patient a été traité par corticoïdes et inhibiteur de la pompe à protons avec amelioration des douleurs sans recours à la chirurgie. L'atteinte digestive au cours du purpura rhumatoïde peut siéger tout au long du tractus digestif. la cholécystite alithiasique est rare et elle est exceptionnellement révélatrice . Le recours à une ...

  20. Diastereoselective Au-Catalyzed Allene Cycloisomerizations to Highly Substituted Cyclopentenes.

    Science.gov (United States)

    Reeves, Ryan D; Phelps, Alicia M; Raimbach, William A T; Schomaker, Jennifer M

    2017-07-07

    Site- and regiocontrolled Au-catalyzed allene carbocyclizations furnish highly substituted cyclopentenes in >1:1 dr. Significant substitution on the substrate is tolerated, with potential to install five contiguous stereocenters after alkene functionalization. Major challenges include identifying a Au/Cu catalyst that controls both the relative rates of allene epimerization/cyclization and the facial selectivity in addition of a metal enolate to the allene. Experiments to achieve stereodivergent cyclizations and transform key cyclopentenes into useful synthetic building blocks are described.

  1. Stress au travail chez les enseignants: approches diagnostique et ...

    African Journals Online (AJOL)

    Des contraintes psychologiques élevées (57,1%), une faible latitude de décision (52,2%) et un faible soutien social (65,0%) sont fortement associés au stress au travail (p respectivement 0,04 ; <0,0001 et 0,0004). L'expérience professionnelle de moins 19 ans était associée à des contraintes psychologiques élevées (72 ...

  2. Chiffrer le travail des femmes au Vietnam | CRDI - Centre de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    31 juil. 2017 ... En mai, un atelier tenu à Hanoi a mis en lumière la question de la double charge de travail au Vietnam, où elle est particulièrement sérieuse en ... L'Institut du travail et des affaires sociales, du ministère du Travail, des Invalides de guerre et des Affaires sociales du Vietnam, a effectué l'étude au Vietnam.

  3. Opportunistes du VIH/SIDA en milieu hospitalier neurologique au ...

    African Journals Online (AJOL)

    Introduction La morbi-mortalité au cours du VIH/sida est souvent liée à des infections opportunistes (IO) neurologiques. L'objectif de cette étude est de déterminer en milieu hospitalier neurologique au Togo, les principales IO et celles qui sont liées à un fort taux de létalité. Méthodes Il s'agissait d'une étude descriptive ...

  4. Programmation religieuse au Moyen-Orient : analyse du contenu de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Depuis dix ans, la télévision contribue beaucoup au façonnement des attitudes au Moyen-Orient. Dans un contexte de gouvernements autoritaires, d'instabilité politique, de guerre et d'interventions militaires étrangères récurrentes, la télévision a permis la diffusion d'opinions et de points de vue qui, autrement, auraient ...

  5. Soutien institutionnel au Centre for Population and Environmental ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Le Centre for Population and Environmental Development (CPED), établi au Nigeria, est un organisme indépendant à but non lucratif qui a été constitué officiellement en 1998. Il se consacre à la recherche-action sur la réduction de la pauvreté et le développement durable au Nigeria en général et dans la région du delta ...

  6. EST Table: AU311143 [KAIKOcDNA[Archive

    Lifescience Database Archive (English)

    Full Text Available AU311143 TT1-27 11/12/09 GO hit GO:0000785(chromatin)|GO:0003682(chromatin binding)...|GO:0005634(nucleus)|GO:0006333(chromatin assembly or disassembly) 10/09/28 n.h 10/08/28 n.h 10/08/27 n.h 10/09/10 n.h 10/09/10 n.h 10/09/10 n.h AU311143 L7 ...

  7. La nouvelle politique concernant le salaire minimum au Myanmar ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    20 avr. 2016 ... Au cours de la dernière décennie, le marché du travail asiatique a été marqué par des augmentations du salaire minimum. Alors que la Chine et le Vietnam ont augmenté leur salaire minimum au cours des 10 dernières années, le Bangladesh et le Cambodge ont adopté un salaire minimum dans les deux ...

  8. Relance de l'aquaculture au Sri Lanka

    International Development Research Centre (IDRC) Digital Library (Canada)

    cas de risque et de mettre au point des systèmes de dépuration (c'est-à-dire de purification au moyen d'eau de mer stérilisée). Un élément primordial du projet de recherche consiste à protéger la population contre les contaminants (aussi bien naturels que d'origine anthropique). Pour que les collectivités puissent exploiter ...

  9. L'entrepreneuriat au Canada dans le contexte mondial | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    13 mai 2016 ... Également selon le rapport, au Canada, les immigrants de première génération se lancent en affaires dans une proportion plus élevée que le reste de la population, et les femmes participent davantage à l'activité entrepreneuriale que dans les autres pays du G7. En outre, au Canada, contrairement à ce ...

  10. Programmes de nutrition au sein des centres de sante ...

    African Journals Online (AJOL)

    Au Mali, l'incidence de l'anémie ferriprive au cours de la grossesse est élevée. Pour contribuer à la réduction de cette anémie, un projet visant à renforcer les connaissances des professionnels de la santé en nutrition périnatale et sensibiliser les femmes enceintes pour une bonne supplémentation en fer/folate a été initié ...

  11. Habitat et environnement urbain au Viêt-nam

    International Development Research Centre (IDRC) Digital Library (Canada)

    La pollution peut être identifiée à trois sources : les rejets industriels, les rejets des hôpitaux et les rejets domestiques. ...... et la malnutrition n'a pas été au-delà du maintien et du respect de la sécurité publique et de l'ordre social à rencontre des pauvres qui travaillent comme porteurs aux stations de bus et au marché.

  12. On the mechanisms of cation injection in conducting bridge memories: The case of HfO2 in contact with noble metal anodes (Au, Cu, Ag)

    International Nuclear Information System (INIS)

    Saadi, M.; Gonon, P.; Vallée, C.; Mannequin, C.; Bsiesy, A.; Grampeix, H.; Jalaguier, E.; Jomni, F.

    2016-01-01

    Resistance switching is studied in HfO 2 as a function of the anode metal (Au, Cu, and Ag) in view of its application to resistive memories (resistive random access memories, RRAM). Current-voltage (I-V) and current-time (I-t) characteristics are presented. For Au anodes, resistance transition is controlled by oxygen vacancies (oxygen-based resistive random access memory, OxRRAM). For Ag anodes, resistance switching is governed by cation injection (Conducting Bridge random access memory, CBRAM). Cu anodes lead to an intermediate case. I-t experiments are shown to be a valuable tool to distinguish between OxRRAM and CBRAM behaviors. A model is proposed to explain the high-to-low resistance transition in CBRAMs. The model is based on the theory of low-temperature oxidation of metals (Cabrera-Mott theory). Upon electron injection, oxygen vacancies and oxygen ions are generated in the oxide. Oxygen ions are drifted to the anode, and an interfacial oxide is formed at the HfO 2 /anode interface. If oxygen ion mobility is low in the interfacial oxide, a negative space charge builds-up at the HfO 2 /oxide interface. This negative space charge is the source of a strong electric field across the interfacial oxide thickness, which pulls out cations from the anode (CBRAM case). Inversely, if oxygen ions migration through the interfacial oxide is important (or if the anode does not oxidize such as Au), bulk oxygen vacancies govern resistance transition (OxRRAM case).

  13. Au70S20(PPh3)12: an intermediate sized metalloid gold cluster stabilized by the Au4S4 ring motif and Au-PPh3 groups.

    Science.gov (United States)

    Kenzler, Sebastian; Schrenk, Claudio; Frojd, Andrew R; Häkkinen, Hannu; Clayborne, Andre Z; Schnepf, Andreas

    2018-01-02

    Reducing (Ph 3 P)AuSC(SiMe 3 ) 3 with l-Selectride® gives the medium-sized metalloid gold cluster Au 70 S 20 (PPh 3 ) 12 . Computational studies show that the phosphine bound Au-atoms not only stabilize the electronic structure of Au 70 S 20 (PPh 3 ) 12 , but also behave as electron acceptors leading to auride-like gold atoms on the exterior.

  14. Camptothecin resistance

    DEFF Research Database (Denmark)

    Brangi, M; Litman, Thomas; Ciotti, M

    1999-01-01

    The mitoxantrone resistance (MXR) gene encodes a recently characterized ATP-binding cassette half-transporter that confers multidrug resistance. We studied resistance to the camptothecins in two sublines expressing high levels of MXR: S1-M1-80 cells derived from parental S1 colon cancer cells...... and MCF-7 AdVp3,000 isolated from parental MCF-7 breast cancer cells. Both cell lines were 400- to 1,000-fold more resistant to topotecan, 9-amino-20(S)-camptothecin, and the active metabolite of irinotecan, 7-ethyl-10-hydroxycamptothecin (SN-38), than their parental cell lines. The cell lines...... demonstrated much less resistance to camptothecin and to several camptothecin analogues. Reduced accumulation and energy-dependent efflux of topotecan was demonstrated by confocal microscopy. A significant reduction in cleavable complexes in the resistant cells could be observed after SN-38 treatment...

  15. Biosupported Bimetallic Pd Au Nanocatalysts for Dechlorination of Environmental Contaminants

    Energy Technology Data Exchange (ETDEWEB)

    De Corte, S.; Fitts, J.; Hennebel, T.; Sabbe, T.; Bliznuk, V.; Verschuere, S.; van der Lelie, D.; Verstraete, W.; Boon, N.

    2011-08-30

    Biologically produced monometallic palladium nanoparticles (bio-Pd) have been shown to catalyze the dehalogenation of environmental contaminants, but fail to efficiently catalyze the degradation of other important recalcitrant halogenated compounds. This study represents the first report of biologically produced bimetallic Pd/Au nanoparticle catalysts. The obtained catalysts were tested for the dechlorination of diclofenac and trichloroethylene. When aqueous bivalent Pd(II) and trivalent Au(III) ions were both added to concentrations of 50 mg L{sup -1} and reduced simultaneously by Shewanella oneidensis in the presence of H{sub 2}, the resulting cell-associated bimetallic nanoparticles (bio-Pd/Au) were able to dehalogenate 78% of the initially added diclofenac after 24 h; in comparison, no dehalogenation was observed using monometallic bio-Pd or bio-Au. Other catalyst-synthesis strategies did not show improved dehalogenation of TCE and diclofenac compared with bio-Pd. Synchrotron-based X-ray diffraction, (scanning) transmission electron microscopy and energy dispersive X-ray spectroscopy indicated that the simultaneous reduction of Pd and Au supported on cells of S. oneidensis resulted in the formation of a unique bimetallic crystalline structure. This study demonstrates that the catalytic activity and functionality of possibly environmentally more benign biosupported Pd-catalysts can be improved by coprecipitation with Au.

  16. Molecular chains and carpets of sexithiophenes on Au(111)

    Science.gov (United States)

    Glowatzki, H.; Duhm, S.; Braun, K.-F.; Rabe, J. P.; Koch, N.

    2007-09-01

    The two organic molecular materials α -sexithiophene (6T) and α,ω -dihexylsexithiophene (DH6T) adsorbed on Au(111) in the (sub)monolayer range were investigated by scanning tunneling microscopy (STM) in order to explore the effect of alkyl substitution on the self-assembly at surfaces. Metal substrate step edges are identified as preferred nucleation sites for 6T, while stable nucleus formation for DH6T occurs at kinks of the Au(111) herringbone reconstruction. At low coverage, 6T forms continuous chains of single-molecular width along Au step edges, involving molecular conformation changes by rotations around C-C bonds of neighboring thiophene units. In contrast, DH6T exhibits no ordered structures in the submonolayer range. At monolayer coverage, substantially different structures were observed for the two molecules. 6T forms rows of molecules with parallel long molecular axes, whereas DH6T forms lines along these axes, where the conjugated cores are embedded in a matrix of hexyl chains. Because of different preferred nucleation sites, 6T forms a continuous molecular carpet on extended Au(111) terraces, whereas DH6T resembles a patchworklike carpet as domain boundaries are induced by the Au(111) herringbone surface structure, leading to reduced domain sizes. Alkylation of 6T thus drastically changes the adsorption behavior and the resulting layer structure on the Au surface. These results should be valuable for developing new directed self-assembly schemes on prepatterned surfaces.

  17. Synthesis of bio-inspired Ag–Au nanocomposite and its anti-biofilm ...

    Indian Academy of Sciences (India)

    Efficiency of AuNPs, AgNPs and Ag–Au nanocomposite was tested for their antibacterial activ- ity against Pseudomonas aeruginosa NCIM 2948. The Ag–Au nanocomposite exhibits enhanced antimicrobial activ- ity over its monometallic ... Silver and gold nanoparticles (Ag and AuNPs) are the most important nanomaterials ...

  18. Sites of Au atoms in Sn crystals as determined by channeling

    International Nuclear Information System (INIS)

    Miller, J.W.; Gemmell, D.S.; Holland, R.E.; Poizat, J.C.; Worthington, J.N.; Loess, R.E.

    1974-01-01

    The position of Au atoms diffused into Sn monocrystals has been studied by channeling and backscattering of 2.5-MeV Ne ions. For equilibrium conditions at 217 0 C, Au atoms are found almost entirely in substitutional positions, so that the unusually fast diffusion of Au in Sn most likely arises from a small fraction of Au atoms migrating interstitially

  19. Alloying Au surface with Pd reduces the intrinsic activity in catalyzing CO oxidation

    KAUST Repository

    Qian, Kun

    2016-03-30

    © 2016. Various Au-Pd/SiO2 catalysts with a fixed Au loading but different Au:Pd molar ratios were prepared via deposition-precipitation method followed by H2 reduction. The structures were characterized and the catalytic activities in CO oxidation were evaluated. The formation of Au-Pd alloy particles was identified. The Au-Pd alloy particles exhibit enhanced dispersions on SiO2 than Au particles. Charge transfer from Pd to Au within Au-Pd alloy particles. Isolated Pd atoms dominate the surface of Au-Pd alloy particles with large Au:Pd molar ratios while contiguous Pd atoms dominate the surface of Au-Pd alloy particles with small Au:Pd molar ratios. Few synergetic effect of Au-Pd alloy occurs on catalyzing CO oxidation under employed reaction conditions. Alloying Au with Pd reduces the intrinsic activity in catalyzing CO oxidation, and contiguous Pd atoms on the Au-Pd alloy particles are capable of catalyzing CO oxidation while isolated Pd atoms are not. These results advance the fundamental understandings of Au-Pd alloy surfaces in catalyzing CO oxidation.

  20. Study on antibacterial activity of chemically synthesized PANI-Ag-Au nanocomposite

    Energy Technology Data Exchange (ETDEWEB)

    Boomi, Pandi [Department of Industrial Chemistry, School of Chemical Sciences, Alagappa University, Karaikudi 630 003, Tamil Nadu (India); Prabu, Halliah Gurumallesh, E-mail: hgprabu2010@gmail.com [Department of Industrial Chemistry, School of Chemical Sciences, Alagappa University, Karaikudi 630 003, Tamil Nadu (India); Manisankar, Paramasivam [Department of Industrial Chemistry, School of Chemical Sciences, Alagappa University, Karaikudi 630 003, Tamil Nadu (India); Ravikumar, Sundaram [Department of Oceanography and Coastal Area Studies, School of Marine Sciences, Alagappa University, Thondi Campus 623 409, Tamil Nadu (India)

    2014-05-01

    Graphical abstract: - Highlights: • New method of synthesizing PANI-Ag-Au nanocomposite. • Surface Plasmon resonance and formation of composite at nano level were analyzed. • HR-TEM study revealed uniform distribution of nanoparticles. • PANI-Ag-Au nanocomposite exhibited good antibacterial activity. - Abstract: Pristine polyaniline (PANI), PANI-Ag, PANI-Au and PANI-Ag-Au nanocomposites have been successfully synthesized by chemical oxidative polymerization method using aniline as monomer, ammonium persulphate as oxidant and metal (Ag, Au and Ag-Au) colloids. UV-Vis analysis exhibited surface Plasmon resonances of Ag, Au, Ag-Au nanoparticles. FT-IR spectra revealed the shift in peak position of N-H stretching. X-ray diffraction (XRD) results confirm the presence of Ag, Au and Au-Ag nanoparticles. HR-TEM images show nanosizes of Ag, Au, Ag-Au and the incorporation of such nanoparticles into the PANI matrix. Pristine PANI, PANI-Ag, PANI-Au and PANI-Ag-Au nanocomposites were tested for antibacterial activity by agar well diffusion method. PANI-Ag-Au nanocomposite exhibited higher antibacterial activity against both gram-positive [Streptococcus sp. (MTCC 890), Staphylococcus sp. (MTCC 96)] and gram-negative bacteria [Escherichia coli (MTCC 1671) and Klebsiella sp. (MTCC 7407)] when compared with PANI-Ag nanocomposite, PANI-Au nanocomposite and pristine PANI. The novelty of this study is the polymer-bimetal synthesis and its antibacterial potential.

  1. Fragment production and collective motion in central Au+Au collisions

    International Nuclear Information System (INIS)

    Fan Zhiguo.

    1992-05-01

    The light charged particles (Z=1,2) and intermediate mass fragments (3 ≤ Z ≤ 15) emitted within the forward cone θ ≤ 30deg in Au+Au collisions at 150 A.MeV beam energy have been measured at SIS-Darmstadt, using the phase I set-up of the 4π detector. The central collisions have been selected by a cut on the total charged-particle multiplicity and a cut on the 'transverse momentum directivity' D, a vector sum of the transverse momenta of the measured charge particles. For the events of the central collisions, large transverse momenta are observed especially for clusters (Z≥3), and the multiplicity of intermediate mass fragments in the acceptance of our setup is about 4. The calculations of a statistical model, a modified version of FREESCO, are compared to the experimental results. A reasonably good agreement has been found between the calculations and the experimental data for the fragment productions and corresponding velocity distributions. The separation of collective and thermal motion for the emitted fragments has been attained. (orig.)

  2. Probing Au nanoparticle uptake by enzyme following the digestion of a starch-Au-nanoparticle composite.

    Science.gov (United States)

    Deka, Jashmini; Paul, Anumita; Ramesh, A; Chattopadhyay, Arun

    2008-09-16

    In this letter, we report on the digestion of starch, when present as a composite with Au nanoparticles (NPs), by alpha-amylase. It has been observed that the rate of digestion of free starch and that in the composite were identical. Also, the well-established iodine test could be carried out to investigate the kinetics in the presence of Au NPs. The investigations revealed that following the digestion of starch in the composite the NPs were released and subsequently attached to the enzyme only and not to the degraded products of starch. Also, the enzyme attached to NPs, following digestion, retained its catalytic activity. The particle sizes of the NPs were not affected in the process because no agglomeration was observed. Experimental observations indicated the possibility of oriented attachment of alpha-amylase to the NPs in comparison to amyloglucosidase, another digestive enzyme. Finally, we observed a change in the surface plasmon resonance (SPR) of the NPs following the digestion of starch in the composite, and thus we could demonstrate that the SPR of the NPs could be used as a direct probe for monitoring the digestion of the composite by the enzyme.

  3. Influence of Bottom Quark Jet Quenching on Single ElectronTomography of Au+Au

    Energy Technology Data Exchange (ETDEWEB)

    Djordjevic, Magdalena; Gyulassy, Miklos; Vogt, Ramona; Wicks, Simon

    2005-07-12

    High transverse momentum single (non-photonic) electrons are shown to be sensitive to the stopping power of both bottom, b, and charm, c, quarks in AA collisions. We apply the DGLV theory of radiative energy loss to predict c and b quark jet quenching and compare the FONLL and PYTHIA heavy flavor fragmentation and decay schemes. We show that single electrons in the p{sub T} = 5-10 GeV range are dominated by the decay of b quarks rather than the more strongly quenched c quarks in Au+Au collisions at {radical}s = 200 AGeV. The smaller b quark energy loss, even for extreme opacities with gluon rapidity densities up to 3500, is predicted to limit the nuclear modification factor, R{sub AA}, of single electrons to the range R{sub AA} {approx} 0.5-0.6, in contrast to previous predictions of R{sub AA} {le} 0.2-0.3 based on taking only c quark jet fragmentation into account.

  4. Au-Pt-Au nanoraspberry structures used for mercury ion detection

    Science.gov (United States)

    Huang, Jiang-Hao; Huang, Shuai; Wen, Xiaoyan; Li, Min; Lu, Haifei

    2017-12-01

    Detection of Hg2+ with high sensitivity is of great significance in the biochemical sensing field. Quantitative of Hg2+ was realized based on the influence of Hg2+ on the UV-vis absorption performance of Au-Pt-Au core-shell nanoraspberry (APA)-rhodamine-6G (R6G) structure. First, APA sol was added into R6G indicator solution and the UV-vis absorption signal intensity of R6G was evidently promoted. The signal intensity monotonously increased as more APA sol was added. However, when HgCl2 solution was introduced, the signal intensity declined. A linear relationship between Hg2+ concentration and signal intensity at 527 nm was revealed, based on which quantitative determination of Hg2+ could be realized. Hg2+ detection sensitivity was measured to be 0.031 a.u./M with a limit of detection of 10-7 M and the response time was 20 s. A high Hg2+ detection selectivity over Cu2+, Na+, Li+, and K+ was demonstrated. Due to its simplicity and high sensitivity, the proposed method could find an extensive application prospect in the Hg2+ detection field.

  5. Beam energy dependence of d and d ‾ production in Au+Au collisions at RHIC

    Science.gov (United States)

    Yu, Ning; STAR Collaboration

    2017-11-01

    The binding energy of light nuclei is small compared to the temperature of the system created in heavy-ion collisions. Consequently, the yields of light nuclei can be used to probe the freeze-out properties, such as correlation volume and local baryon density of the medium created in high-energy nuclear collisions. In this paper, we report the results of deuteron and anti-deuteron production in Au+Au collision at √{sNN} = 7.7, 11.5, 14.5, 19.6, 27, 39, 62.4, and 200 GeV, measured by STAR at RHIC. The collision energy, centrality and transverse momentum dependence of the coalescence parameter B2 for deuteron and anti-deuteron production are discussed. We find the values of B2 for anti-deuterons are systematically lower than those for deuterons indicating the correlation volume of anti-baryon are larger than that of baryon. In addition, the values of B2 are found to vary with collision energy and show a broad minimum around √{sNN} = 20GeV, implying a change of the equation of state of the medium in these collisions.

  6. RHIC PERFORMANCE DURING THE FY10 200 GeV Au+Au HEAVY ION RUN

    International Nuclear Information System (INIS)

    Brown, K.A.; Ahrens, L.; Bai, M.; Beebe-Wang, J.; Blaskiewicz, M.; Brennan, J.; Bruno, D.; Carlson, C.; Connolly, R.; de Maria, R.; D'Ottavio, T.; Drees, A.; Fischer, W.; Fu, W.; Gardner, C.; Gassner, D.; Glenn, J.W.; Hao, Y.; Harvey, M.; Hayes, T.; Hoff, L.; Huang, H.; Laster, J.; Lee, R.; Litvinenko, V.; Luo, Y.; MacKay, W.; Marr, G.; Marusic, A.; Mernick, K.; Michnoff, R.; Minty, M.; Montag, C.; Morris, J.; Nemesure, S.; Oerter, B.; Pilat, F.; Ptitsyn, V.; Robert-Demolaize, G.; Roser, T.; Russo, T.; Sampson, P.; Sandberg, J.; Satogata, T.; Severino, F.; Schoefer, V.; Schultheiss, C.; Smith, K.; Steski, D.; Tepikian, S.; Theisen, C.; Thieberger, P.; Trbojevic, D.; Tsoupas, N.; Tuozzolo, J.; Wang, G.; Wilinski, M.; Zaltsman, A.; Zeno, K.; Zhang, S.Y.

    2010-01-01

    Since the last successful RHIC Au+Au run in 2007 (Run-7), the RHIC experiments have made numerous detector improvements and upgrades. In order to benefit from the enhanced detector capabilities and to increase the yield of rare events in the acquired heavy ion data a significant increase in luminosity is essential. In Run-7 RHIC achieved an average store luminosity of = 12 x 10 26 cm -2 s -1 by operating with 103 bunches (out of 111 possible), and by squeezing to β* = 0.85 m. This year, Run-10, we achieved = 20 x 10 26 cm -2 s -1 , which put us an order of magnitude above the RHIC design luminosity. To reach these luminosity levels we decreased β* to 0.75 m, operated with 111 bunches per ring, and reduced longitudinal and transverse emittances by means of bunched-beam stochastic cooling. In addition we introduced a lattice to suppress intra-beam scattering (IBS) in both RHIC rings, upgraded the RF control system, and separated transition crossing times in the two rings. We present an overview of the changes and the results of Run-10 performance.

  7. RHIC PERFORMANCE DURING THE FY10 200 GeV Au+Au HEAVY ION RUN

    Energy Technology Data Exchange (ETDEWEB)

    Brown, K.A.; Ahrens, L.; Bai, M.; Beebe-Wang, J.; Blaskiewicz, M.; Brennan, J.; Bruno, D.; Carlson, C.; Connolly, R.; de Maria, R.; D’Ottavio, T.; Drees, A.; Fischer, W.; Fu, W.; Gardner, C.; Gassner, D.; Glenn, J.W.; Hao, Y.; Harvey, M.; Hayes, T.; Hoff, L.; Huang, H.; Laster, J.; Lee, R.; Litvinenko, V.; Luo, Y.; MacKay, W.; Marr, G.; Marusic, A.; Mernick, K.; Michnoff, R.; Minty, M.; Montag, C.; Morris, J.; Nemesure, S.; Oerter, B.; Pilat, F.; Ptitsyn, V.; Robert-Demolaize, G.; Roser, T.; Russo, T.; Sampson, P.; Sandberg, J.; Satogata, T.; Severino, F.; Schoefer, V.; Schultheiss, C.; Smith, K.; Steski, D.; Tepikian, S.; Theisen, C.; Thieberger, P.; Trbojevic, D.; Tsoupas, N.; Tuozzolo, J.; Wang, G.; Wilinski, M.; Zaltsman, A.; Zeno, K.; Zhang, S.Y.

    2010-05-23

    Since the last successful RHIC Au+Au run in 2007 (Run-7), the RHIC experiments have made numerous detector improvements and upgrades. In order to benefit from the enhanced detector capabilities and to increase the yield of rare events in the acquired heavy ion data a significant increase in luminosity is essential. In Run-7 RHIC achieved an average store luminosity of = 12 x 10{sup 26} cm{sup -2} s{sup -1} by operating with 103 bunches (out of 111 possible), and by squeezing to {beta}* = 0.85 m. This year, Run-10, we achieved = 20 x 10{sup 26} cm{sup -2} s{sup -1}, which put us an order of magnitude above the RHIC design luminosity. To reach these luminosity levels we decreased {beta}* to 0.75 m, operated with 111 bunches per ring, and reduced longitudinal and transverse emittances by means of bunched-beam stochastic cooling. In addition we introduced a lattice to suppress intra-beam scattering (IBS) in both RHIC rings, upgraded the RF control system, and separated transition crossing times in the two rings. We present an overview of the changes and the results of Run-10 performance.

  8. Azimuthal Anisotropy in U+U and Au+Au Collisions at RHIC.

    Science.gov (United States)

    Adamczyk, L; Adkins, J K; Agakishiev, G; Aggarwal, M M; Ahammed, Z; Alekseev, I; Alford, J; Aparin, A; Arkhipkin, D; Aschenauer, E C; Averichev, G S; Banerjee, A; Bellwied, R; Bhasin, A; Bhati, A K; Bhattarai, P; Bielcik, J; Bielcikova, J; Bland, L C; Bordyuzhin, I G; Bouchet, J; Brandin, A V; Bunzarov, I; Burton, T P; Butterworth, J; Caines, H; Calderón de la Barca Sánchez, M; Campbell, J M; Cebra, D; Cervantes, M C; Chakaberia, I; Chaloupka, P; Chang, Z; Chattopadhyay, S; Chen, J H; Chen, X; Cheng, J; Cherney, M; Christie, W; Contin, G; Crawford, H J; Das, S; De Silva, L C; Debbe, R R; Dedovich, T G; Deng, J; Derevschikov, A A; di Ruzza, B; Didenko, L; Dilks, C; Dong, X; Drachenberg, J L; Draper, J E; Du, C M; Dunkelberger, L E; Dunlop, J C; Efimov, L G; Engelage, J; Eppley, G; Esha, R; Evdokimov, O; Eyser, O; Fatemi, R; Fazio, S; Federic, P; Fedorisin, J; Feng, Z; Filip, P; Fisyak, Y; Flores, C E; Fulek, L; Gagliardi, C A; Garand, D; Geurts, F; Gibson, A; Girard, M; Greiner, L; Grosnick, D; Gunarathne, D S; Guo, Y; Gupta, S; Gupta, A; Guryn, W; Hamad, A; Hamed, A; Haque, R; Harris, J W; He, L; Heppelmann, S; Heppelmann, S; Hirsch, A; Hoffmann, G W; Hofman, D J; Horvat, S; Huang, H Z; Huang, B; Huang, X; Huck, P; Humanic, T J; Igo, G; Jacobs, W W; Jang, H; Jiang, K; Judd, E G; Kabana, S; Kalinkin, D; Kang, K; Kauder, K; Ke, H W; Keane, D; Kechechyan, A; Khan, Z H; Kikola, D P; Kisel, I; Kisiel, A; Koetke, D D; Kollegger, T; Kosarzewski, L K; Kotchenda, L; Kraishan, A F; Kravtsov, P; Krueger, K; Kulakov, I; Kumar, L; Kycia, R A; Lamont, M A C; Landgraf, J M; Landry, K D; Lauret, J; Lebedev, A; Lednicky, R; Lee, J H; Li, W; Li, Y; Li, C; Li, Z M; Li, X; Li, X; Lisa, M A; Liu, F; Ljubicic, T; Llope, W J; Lomnitz, M; Longacre, R S; Luo, X; Ma, L; Ma, R; Ma, Y G; Ma, G L; Magdy, N; Majka, R; Manion, A; Margetis, S; Markert, C; Masui, H; Matis, H S; McDonald, D; Meehan, K; Minaev, N G; Mioduszewski, S; Mohanty, B; Mondal, M M; Morozov, D A; Mustafa, M K; Nandi, B K; Nasim, Md; Nayak, T K; Nigmatkulov, G; Nogach, L V; Noh, S Y; Novak, J; Nurushev, S B; Odyniec, G; Ogawa, A; Oh, K; Okorokov, V; Olvitt, D L; Page, B S; Pak, R; Pan, Y X; Pandit, Y; Panebratsev, Y; Pawlik, B; Pei, H; Perkins, C; Peterson, A; Pile, P; Planinic, M; Pluta, J; Poljak, N; Poniatowska, K; Porter, J; Posik, M; Poskanzer, A M; Pruthi, N K; Putschke, J; Qiu, H; Quintero, A; Ramachandran, S; Raniwala, S; Raniwala, R; Ray, R L; Ritter, H G; Roberts, J B; Rogachevskiy, O V; Romero, J L; Roy, A; Ruan, L; Rusnak, J; Rusnakova, O; Sahoo, N R; Sahu, P K; Sakrejda, I; Salur, S; Sandweiss, J; Sarkar, A; Schambach, J; Scharenberg, R P; Schmah, A M; Schmidke, W B; Schmitz, N; Seger, J; Seyboth, P; Shah, N; Shahaliev, E; Shanmuganathan, P V; Shao, M; Sharma, B; Sharma, M K; Shen, W Q; Shi, S S; Shou, Q Y; Sichtermann, E P; Sikora, R; Simko, M; Skoby, M J; Smirnov, D; Smirnov, N; Song, L; Sorensen, P; Spinka, H M; Srivastava, B; Stanislaus, T D S; Stepanov, M; Stock, R; Strikhanov, M; Stringfellow, B; Sumbera, M; Summa, B J; Sun, X; Sun, X M; Sun, Z; Sun, Y; Surrow, B; Svirida, D N; Szelezniak, M A; Tang, Z; Tang, A H; Tarnowsky, T; Tawfik, A N; Thomas, J H; Timmins, A R; Tlusty, D; Tokarev, M; Trentalange, S; Tribble, R E; Tribedy, P; Tripathy, S K; Trzeciak, B A; Tsai, O D; Ullrich, T; Underwood, D G; Upsal, I; Van Buren, G; van Nieuwenhuizen, G; Vandenbroucke, M; Varma, R; Vasiliev, A N; Vertesi, R; Videbaek, F; Viyogi, Y P; Vokal, S; Voloshin, S A; Vossen, A; Wang, F; Wang, Y; Wang, H; Wang, J S; Wang, Y; Wang, G; Webb, G; Webb, J C; Wen, L; Westfall, G D; Wieman, H; Wissink, S W; Witt, R; Wu, Y F; Xiao, Z; Xie, W; Xin, K; Xu, Y F; Xu, N; Xu, Z; Xu, Q H; Xu, H; Yang, Y; Yang, Y; Yang, C; Yang, S; Yang, Q; Ye, Z; Yepes, P; Yi, L; Yip, K; Yoo, I-K; Yu, N; Zbroszczyk, H; Zha, W; Zhang, X P; Zhang, J B; Zhang, J; Zhang, Z; Zhang, S; Zhang, Y; Zhang, J L; Zhao, F; Zhao, J; Zhong, C; Zhou, L; Zhu, X; Zoulkarneeva, Y; Zyzak, M

    2015-11-27

    Collisions between prolate uranium nuclei are used to study how particle production and azimuthal anisotropies depend on initial geometry in heavy-ion collisions. We report the two- and four-particle cumulants, v_{2}{2} and v_{2}{4}, for charged hadrons from U+U collisions at sqrt[s_{NN}]=193  GeV and Au+Au collisions at sqrt[s_{NN}]=200  GeV. Nearly fully overlapping collisions are selected based on the energy deposited by spectators in zero degree calorimeters (ZDCs). Within this sample, the observed dependence of v_{2}{2} on multiplicity demonstrates that ZDC information combined with multiplicity can preferentially select different overlap configurations in U+U collisions. We also show that v_{2} vs multiplicity can be better described by models, such as gluon saturation or quark participant models, that eliminate the dependence of the multiplicity on the number of binary nucleon-nucleon collisions.

  9. Beam Energy Dependence of the Third Harmonic of Azimuthal Correlations in Au +Au Collisions at RHIC

    Science.gov (United States)

    Adamczyk, L.; Adkins, J. K.; Agakishiev, G.; Aggarwal, M. M.; Ahammed, Z.; Alekseev, I.; Aparin, A.; Arkhipkin, D.; Aschenauer, E. C.; Attri, A.; Averichev, G. S.; Bai, X.; Bairathi, V.; Bellwied, R.; Bhasin, A.; Bhati, A. K.; Bhattarai, P.; Bielcik, J.; Bielcikova, J.; Bland, L. C.; Bordyuzhin, I. G.; Bouchet, J.; Brandenburg, J. D.; Brandin, A. V.; Bunzarov, I.; Butterworth, J.; Caines, H.; Calderón de la Barca Sánchez, M.; Campbell, J. M.; Cebra, D.; Chakaberia, I.; Chaloupka, P.; Chang, Z.; Chatterjee, A.; Chattopadhyay, S.; Chen, J. H.; Chen, X.; Cheng, J.; Cherney, M.; Christie, W.; Contin, G.; Crawford, H. J.; Das, S.; De Silva, L. C.; Debbe, R. R.; Dedovich, T. G.; Deng, J.; Derevschikov, A. A.; di Ruzza, B.; Didenko, L.; Dilks, C.; Dong, X.; Drachenberg, J. L.; Draper, J. E.; Du, C. M.; Dunkelberger, L. E.; Dunlop, J. C.; Efimov, L. G.; Engelage, J.; Eppley, G.; Esha, R.; Evdokimov, O.; Eyser, O.; Fatemi, R.; Fazio, S.; Federic, P.; Fedorisin, J.; Feng, Z.; Filip, P.; Fisyak, Y.; Flores, C. E.; Fulek, L.; Gagliardi, C. A.; Garand, D.; Geurts, F.; Gibson, A.; Girard, M.; Greiner, L.; Grosnick, D.; Gunarathne, D. S.; Guo, Y.; Gupta, S.; Gupta, A.; Guryn, W.; Hamad, A. I.; Hamed, A.; Haque, R.; Harris, J. W.; He, L.; Heppelmann, S.; Heppelmann, S.; Hirsch, A.; Hoffmann, G. W.; Horvat, S.; Huang, T.; Huang, X.; Huang, B.; Huang, H. Z.; Huck, P.; Humanic, T. J.; Igo, G.; Jacobs, W. W.; Jang, H.; Jentsch, A.; Jia, J.; Jiang, K.; Judd, E. G.; Kabana, S.; Kalinkin, D.; Kang, K.; Kauder, K.; Ke, H. W.; Keane, D.; Kechechyan, A.; Khan, Z. H.; Kikoła, D. P.; Kisel, I.; Kisiel, A.; Kochenda, L.; Koetke, D. D.; Kosarzewski, L. K.; Kraishan, A. F.; Kravtsov, P.; Krueger, K.; Kumar, L.; Lamont, M. A. C.; Landgraf, J. M.; Landry, K. D.; Lauret, J.; Lebedev, A.; Lednicky, R.; Lee, J. H.; Li, X.; Li, C.; Li, X.; Li, Y.; Li, W.; Lin, T.; Lisa, M. A.; Liu, F.; Ljubicic, T.; Llope, W. J.; Lomnitz, M.; Longacre, R. S.; Luo, X.; Ma, R.; Ma, G. L.; Ma, Y. G.; Ma, L.; Magdy, N.; Majka, R.; Manion, A.; Margetis, S.; Markert, C.; Matis, H. S.; McDonald, D.; McKinzie, S.; Meehan, K.; Mei, J. C.; Minaev, N. G.; Mioduszewski, S.; Mishra, D.; Mohanty, B.; Mondal, M. M.; Morozov, D. A.; Mustafa, M. K.; Nandi, B. K.; Nasim, Md.; Nayak, T. K.; Nigmatkulov, G.; Niida, T.; Nogach, L. V.; Noh, S. Y.; Novak, J.; Nurushev, S. B.; Odyniec, G.; Ogawa, A.; Oh, K.; Okorokov, V. A.; Olvitt, D.; Page, B. S.; Pak, R.; Pan, Y. X.; Pandit, Y.; Panebratsev, Y.; Pawlik, B.; Pei, H.; Perkins, C.; Pile, P.; Pluta, J.; Poniatowska, K.; Porter, J.; Posik, M.; Poskanzer, A. M.; Pruthi, N. K.; Putschke, J.; Qiu, H.; Quintero, A.; Ramachandran, S.; Raniwala, S.; Raniwala, R.; Ray, R. L.; Ritter, H. G.; Roberts, J. B.; Rogachevskiy, O. V.; Romero, J. L.; Ruan, L.; Rusnak, J.; Rusnakova, O.; Sahoo, N. R.; Sahu, P. K.; Sakrejda, I.; Salur, S.; Sandweiss, J.; Sarkar, A.; Schambach, J.; Scharenberg, R. P.; Schmah, A. M.; Schmidke, W. B.; Schmitz, N.; Seger, J.; Seyboth, P.; Shah, N.; Shahaliev, E.; Shanmuganathan, P. V.; Shao, M.; Sharma, A.; Sharma, B.; Sharma, M. K.; Shen, W. Q.; Shi, Z.; Shi, S. S.; Shou, Q. Y.; Sichtermann, E. P.; Sikora, R.; Simko, M.; Singha, S.; Skoby, M. J.; Smirnov, N.; Smirnov, D.; Solyst, W.; Song, L.; Sorensen, P.; Spinka, H. M.; Srivastava, B.; Stanislaus, T. D. S.; Stepanov, M.; Stock, R.; Strikhanov, M.; Stringfellow, B.; Sumbera, M.; Summa, B.; Sun, Z.; Sun, X. M.; Sun, Y.; Surrow, B.; Svirida, D. N.; Tang, Z.; Tang, A. H.; Tarnowsky, T.; Tawfik, A.; Thäder, J.; Thomas, J. H.; Timmins, A. R.; Tlusty, D.; Todoroki, T.; Tokarev, M.; Trentalange, S.; Tribble, R. E.; Tribedy, P.; Tripathy, S. K.; Tsai, O. D.; Ullrich, T.; Underwood, D. G.; Upsal, I.; Van Buren, G.; van Nieuwenhuizen, G.; Vandenbroucke, M.; Varma, R.; Vasiliev, A. N.; Vertesi, R.; Videbæk, F.; Vokal, S.; Voloshin, S. A.; Vossen, A.; Wang, F.; Wang, G.; Wang, J. S.; Wang, H.; Wang, Y.; Wang, Y.; Webb, G.; Webb, J. C.; Wen, L.; Westfall, G. D.; Wieman, H.; Wissink, S. W.; Witt, R.; Wu, Y.; Xiao, Z. G.; Xie, W.; Xie, G.; Xin, K.; Xu, Y. F.; Xu, Q. H.; Xu, N.; Xu, H.; Xu, Z.; Xu, J.; Yang, S.; Yang, Y.; Yang, Y.; Yang, C.; Yang, Y.; Yang, Q.; Ye, Z.; Ye, Z.; Yepes, P.; Yi, L.; Yip, K.; Yoo, I.-K.; Yu, N.; Zbroszczyk, H.; Zha, W.; Zhang, X. P.; Zhang, Y.; Zhang, J.; Zhang, J.; Zhang, S.; Zhang, S.; Zhang, Z.; Zhang, J. B.; Zhao, J.; Zhong, C.; Zhou, L.; Zhu, X.; Zoulkarneeva, Y.; Zyzak, M.; STAR Collaboration

    2016-03-01

    We present results from a harmonic decomposition of two-particle azimuthal correlations measured with the STAR detector in Au +Au collisions for energies ranging from √{sN N }=7.7 to 200 GeV. The third harmonic v32{2 }=⟨cos 3 (ϕ1-ϕ2)⟩ , where ϕ1-ϕ2 is the angular difference in azimuth, is studied as a function of the pseudorapidity difference between particle pairs Δ η =η1-η2 . Nonzero v32{2 } is directly related to the previously observed large-Δ η narrow-Δ ϕ ridge correlations and has been shown in models to be sensitive to the existence of a low viscosity quark gluon plasma phase. For sufficiently central collisions, v32{2 } persist down to an energy of 7.7 GeV, suggesting that quark gluon plasma may be created even in these low energy collisions. In peripheral collisions at these low energies, however, v32{2 } is consistent with zero. When scaled by the pseudorapidity density of charged-particle multiplicity per participating nucleon pair, v32{2 } for central collisions shows a minimum near √{sN N }=20 GeV .

  10. Phospholipid Encapsulated AuNR@Ag/Au Nanosphere SERS Tags with Environmental Stimulus Responsive Signal Property.

    Science.gov (United States)

    Su, Xueming; Wang, Yunqing; Wang, Wenhai; Sun, Kaoxiang; Chen, Lingxin

    2016-04-27

    Surface-enhanced Raman scattering (SERS) tags draw much attention due to the ultrasensitivity and multiplex labeling capability. Recently, a new kind of SERS tags was rationally designed by encapsulating metal nanoparticles with phospholipid bilayers, showing great potential in theranostics. The lipid bilayer coating confers biocompatibility and versatility to changing surface chemistry of the tag; however, its "soft" feature may influence SERS signal stability, which is rarely investigated. Herein, we prepared phospholipid-coated AuNR@Ag/Au nanosphere SERS tags by using three different kinds of Raman reporters, i.e., thio-containing 4-nitrothiophenol (NT), nitrogen-containing hydrophobic chromophore cyanine 7 monoacid (Cy7), and alkyl chain-chromophore conjugate 1,1'-dioctadecyl-3,3,3',3'-tetramethylindodicarbocyanine (DiD). It was found that signal responses were different upon additional stimulation which the tags may encounter in theranostic applications including the presence of detergent Triton X-100, lipid membrane, and photothermal treatment. Living-cell imaging also showed signal changing distinction. The different SERS signal performances were attributed to the different Raman reporter releasing behaviors from the tags. This work revealed that Raman reporter structure determined signal stability of lipid-coated SERS tags, providing guidance for the design of stimulus responsive tags. Moreover, it also implied the potential of SERS technique for real time drug release study of lipid based nanomedicine.

  11. Functional gold nanoparticle-based antibacterial agents for nosocomial and antibiotic-resistant bacteria.

    Science.gov (United States)

    Kuo, Yen-Ling; Wang, Sin-Ge; Wu, Ching-Yi; Lee, Kai-Chieh; Jao, Chan-Jung; Chou, Shiu-Huey; Chen, Yu-Chie

    2016-10-01

    Medical treatments for bacterial-infections have become challenging because of the emergence of antibiotic-resistant bacterial strains. Thus, new therapeutics and antibiotics must be developed. Arginine and tryptophan can target negatively-charged bacteria and penetrate bacterial cell membrane, respectively. Synthetic-peptides containing arginine, tryptophan and cysteine termini, in other words, (DVFLG)2REEW4C and (DVFLG)2REEW2C, as starting materials were mixed with aqueous tetrachloroauric acid to generate peptide-immobilized gold nanoparticles (i.e., [DVFLG]2REEW4C-AuNPs and [DVFLG]2REEW2C-AuNPs) through one-pot reactions. The peptide immobilized AuNPs exhibit targeting capacity and antibacterial activity. Furthermore, (DVFLG)2REEW4C-AuNPs immobilized with a higher number of tryptophan molecules possess more effective antibacterial capacity than (DVFLG)2REEW2C-AuNPs. Nevertheless, they are not harmful for animal cells. The feasibility of using the peptide-AuNPs to inhibit the cell growth of bacterium-infected macrophages was demonstrated. These results suggested that the proposed antibacterial AuNPs are effective antibacterial agents for Staphylococci, Enterococci and antibiotic-resistant bacterial strains. [Formula: see text].

  12. Collective flow measurements with HADES in Au+Au collisions at 1.23A GeV

    Science.gov (United States)

    Kardan, Behruz; Hades Collaboration

    2017-11-01

    HADES has a large acceptance combined with a good mass-resolution and therefore allows the study of dielectron and hadron production in heavy-ion collisions with unprecedented precision. With the statistics of seven billion Au-Au collisions at 1.23A GeV recorded in 2012, the investigation of higher-order flow harmonics is possible. At the BEVALAC and SIS18 directed and elliptic flow has been measured for pions, charged kaons, protons, neutrons and fragments, but higher-order harmonics have not yet been studied. They provide additional important information on the properties of the dense hadronic medium produced in heavy-ion collisions. We present here a high-statistics, multidifferential measurement of v1 and v2 for protons in Au+Au collisions at 1.23A GeV.

  13. Structure and Mobility of Metal Clusters in MOFs: Au, Pd, and AuPd Clusters in MOF-74

    DEFF Research Database (Denmark)

    Vilhelmsen, Lasse; Walton, Krista S.; Sholl, David S.

    2012-01-01

    Understanding the adsorption and mobility of metal–organic framework (MOF)-supported metal nanoclusters is critical to the development of these catalytic materials. We present the first theoretical investigation of Au-, Pd-, and AuPd-supported clusters in a MOF, namely MOF-74. We combine density...... functional theory (DFT) calculations with a genetic algorithm (GA) to reliably predict the structure of the adsorbed clusters. This approach allows comparison of hundreds of adsorbed configurations for each cluster. From the investigation of Au8, Pd8, and Au4Pd4 we find that the organic part of the MOF...... is just as important for nanocluster adsorption as open Zn or Mg metal sites. Using the large number of clusters generated by the GA, we developed a systematic method for predicting the mobility of adsorbed clusters. Through the investigation of diffusion paths a relationship between the cluster...

  14. Wetting - Dewetting Transitions of Au/Ni Bilayer Films

    Science.gov (United States)

    Cen, Xi

    Thin films deposited at low temperatures are often kinetically constrained and will dewet the underlying substrate when annealed. Solid state dewetting is driven by the minimization of the total free energy of thin film-substrate interface and free surface, and mostly occurs through surface diffusion. Dewetting is a serious concern in microelectronics reliability. However, it can also be utilized for the self-assembly of nanostructures with potentials in storage, catalysis, or transistors. Therefore, a fundamental understanding of the dewetting behavior of thin metal films is critical for improving the thermal stability of microelectronics and controlling the order of self-assembled nanostructures. Mechanisms for dewetting of single layer films have been studied extensively. However little work has been reported on multilayer or alloyed thin films. In the thesis, the solid state dewetting of Au/Ni bilayer films deposited on SiO2/Si substrates was investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and aberration corrected scanning TEM (STEM). Ex-situ SEM and TEM studies were performed with in-situ TEM heating characterization to identify the mechanisms during the dewetting process of Au/Ni bilayer films. The solid state dewetting of Au/Ni bilayer films from SiO2/Si substrates exhibits both homogeneous and localized dewetting of Ni and long-edge retraction for Au under isothermal annealing condition. The top Au layer retracts up to 1 mm from the edge of the substrate wafer to reduce the energetically unfavored Au/Ni interface. In contrast, Ni dewets and agglomerates locally due to its limited diffusivity compared to Au. Film morphology and local chemical composition varies significantly across hundreds of microns along the direction normal to the retracting edge. Besides long range edge receding, localized dewetting shows significant changes in film morphology and chemical distribution. Both Au and Ni shows texturing. Despite

  15. In vitro study on the corrosion behavior of three commercial Ag-Pd-Cu-Au alloys in Ringer's and 0.1%Na2S solutions.

    Science.gov (United States)

    Endo, K; Araki, Y; Kawashima, I; Yamane, Y; Ohno, H; Matsuda, K

    1989-12-01

    The corrosion resistance of three commercial Ag-Pd-Cu-Au alloys was estimated in Ringer's and 0.1% Na2S solutions by electrochemical techniques and surface analyses. In Ringer's solution, the three alloys showed high corrosion resistance and there was no significant difference in the anodic polarization characteristics of the three alloys. In the 0.1% Na2S solution, the Alloy A which had the lowest noble metal content (Au + Pd) exhibited the highest anodic reactivity with the largest amount of corrosion product on the alloy surface. It was determined that the Ag-rich phase of Ag-Pd-Cu-Au alloy was preferentially attacked to form Ag2S corrosion product. The polarization resistance data showed that the corrosion rate for Alloy A in 0.1% Na2S solution was determined to be 500 times higher than that in Ringer's solution. The corrosion rate of the alloy in the freely corroded condition can be estimated quantitatively and precisely by measuring the polarization resistance.

  16. Flexible nonvolatile memory devices based on Au/PMMA nanocomposites deposited on PEDOT:PSS/Ag nanowire hybrid electrodes

    International Nuclear Information System (INIS)

    Sung, Sihyun; Kim, Tae Whan

    2017-01-01

    Highlights: • Flexible nonvolatile memory (NVM) devices fabricated utilizing Au nanoparticles (AuNPs) embedded in a PMMA layer were fabricated. • The insertion of the PEDOT:PSS layer enhanced the surface uniformity of the AgNW bottom electrode, resulting in improved device performances. • Current-voltage curves for the Al/PMMA:AuNP/PEDOT:PSS/AgNW/PET devices showed clockwise current hysteresis behaviors. • ON/OFF ratio of 1 × 10 3 was maintained for retention times longer than 1 × 10 4 s. • Memory characteristics of the NVM devices before and after bending were similar. - Abstract: Flexible nonvolatile memory (NVM) devices fabricated utilizing Au nanoparticles (AuNPs) embedded in a poly(methylmethacrylate) (PMMA) layer were fabricated on a silver nanowire (AgNW) or a poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/AgNW coated on poly(ethylene terephthalate) (PET) substrates. The transmittance and the sheet resistance of the PEDOT:PSS/AgNW hybrid layer were approximately 89% and 50 Ω/sq, respectively, which were comparable to the values for commercial indium-tin-oxide (ITO) electrodes. Current-voltage curves for the Al/PMMA:AuNP/PEDOT:PSS/AgNW/PET devices at 300 K showed clockwise current hysteresis behaviors due to the existence of the AuNPs. The endurance number of ON/OFF switching for the NVM devices was above 30 cycles. An ON/OFF ratio of 1 × 10 3 was maintained for retention times longer than 1 × 10 4 s. The maximum memory margins of the NVM devices before and after bending were approximately 3.4 × 10 3 and 1.4 × 10 3 , respectively. The retention times of the devices before and after bending remained same 1 × 10 4 s. The memory margin and the stability of flexible NVMs fabricated on AgNW electrodes were enhanced due to the embedded PEDOT:PSS buffer layer.

  17. Flexible nonvolatile memory devices based on Au/PMMA nanocomposites deposited on PEDOT:PSS/Ag nanowire hybrid electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Sung, Sihyun; Kim, Tae Whan, E-mail: twk@hanyang.ac.kr

    2017-07-31

    Highlights: • Flexible nonvolatile memory (NVM) devices fabricated utilizing Au nanoparticles (AuNPs) embedded in a PMMA layer were fabricated. • The insertion of the PEDOT:PSS layer enhanced the surface uniformity of the AgNW bottom electrode, resulting in improved device performances. • Current-voltage curves for the Al/PMMA:AuNP/PEDOT:PSS/AgNW/PET devices showed clockwise current hysteresis behaviors. • ON/OFF ratio of 1 × 10{sup 3} was maintained for retention times longer than 1 × 10{sup 4} s. • Memory characteristics of the NVM devices before and after bending were similar. - Abstract: Flexible nonvolatile memory (NVM) devices fabricated utilizing Au nanoparticles (AuNPs) embedded in a poly(methylmethacrylate) (PMMA) layer were fabricated on a silver nanowire (AgNW) or a poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/AgNW coated on poly(ethylene terephthalate) (PET) substrates. The transmittance and the sheet resistance of the PEDOT:PSS/AgNW hybrid layer were approximately 89% and 50 Ω/sq, respectively, which were comparable to the values for commercial indium-tin-oxide (ITO) electrodes. Current-voltage curves for the Al/PMMA:AuNP/PEDOT:PSS/AgNW/PET devices at 300 K showed clockwise current hysteresis behaviors due to the existence of the AuNPs. The endurance number of ON/OFF switching for the NVM devices was above 30 cycles. An ON/OFF ratio of 1 × 10{sup 3} was maintained for retention times longer than 1 × 10{sup 4} s. The maximum memory margins of the NVM devices before and after bending were approximately 3.4 × 10{sup 3} and 1.4 × 10{sup 3}, respectively. The retention times of the devices before and after bending remained same 1 × 10{sup 4} s. The memory margin and the stability of flexible NVMs fabricated on AgNW electrodes were enhanced due to the embedded PEDOT:PSS buffer layer.

  18. Partonic flow and ϕ-meson production in Au+Au collisions at VsNN=200 = GeV

    NARCIS (Netherlands)

    Bai, Y.; Benedosso, F.; Botje, M.A.J.; Grebenyuk, O.; Mischke, A.; Peitzmann, T.; Russcher, M.J.; Snellings, R.J.M.; van der Kolk, N.

    2007-01-01

    We present first measurements of the ϕ-meson elliptic flow (v2(pT)) and high-statistics pT distributions for different centralities from √sNN=200  GeV Au+Au collisions at RHIC. In minimum bias collisions the v2 of the ϕ meson is consistent with the trend observed for mesons. The ratio of the yields

  19. Λ Λ Correlation Function in Au +Au Collisions at √{sN N }=200 GeV

    Science.gov (United States)

    Adamczyk, L.; Adkins, J. K.; Agakishiev, G.; Aggarwal, M. M.; Ahammed, Z.; Alekseev, I.; Alford, J.; Anson, C. D.; Aparin, A.; Arkhipkin, D.; Aschenauer, E. C.; Averichev, G. S.; Banerjee, A.; Beavis, D. R.; Bellwied, R.; Bhasin, A.; Bhati, A. K.; Bhattarai, P.; Bichsel, H.; Bielcik, J.; Bielcikova, J.; Bland, L. C.; Bordyuzhin, I. G.; Borowski, W.; Bouchet, J.; Brandin, A. V.; Brovko, S. G.; Bültmann, S.; Bunzarov, I.; Burton, T. P.; Butterworth, J.; Caines, H.; Calderón de la Barca Sánchez, M.; Campbell, J. M.; Cebra, D.; Cendejas, R.; Cervantes, M. C.; Chaloupka, P.; Chang, Z.; Chattopadhyay, S.; Chen, H. F.; Chen, J. H.; Chen, L.; Cheng, J.; Cherney, M.; Chikanian, A.; Christie, W.; Chwastowski, J.; Codrington, M. J. M.; Contin, G.; Cramer, J. G.; Crawford, H. J.; Cui, X.; Das, S.; Davila Leyva, A.; De Silva, L. C.; Debbe, R. R.; Dedovich, T. G.; Deng, J.; Derevschikov, A. A.; Derradi de Souza, R.; di Ruzza, B.; Didenko, L.; Dilks, C.; Ding, F.; Djawotho, P.; Dong, X.; Drachenberg, J. L.; Draper, J. E.; Du, C. M.; Dunkelberger, L. E.; Dunlop, J. C.; Efimov, L. G.; Engelage, J.; Engle, K. S.; Eppley, G.; Eun, L.; Evdokimov, O.; Eyser, O.; Fatemi, R.; Fazio, S.; Fedorisin, J.; Filip, P.; Fisyak, Y.; Flores, C. E.; Gagliardi, C. A.; Gangadharan, D. R.; Garand, D.; Geurts, F.; Gibson, A.; Girard, M.; Gliske, S.; Greiner, L.; Grosnick, D.; Gunarathne, D. S.; Guo, Y.; Gupta, A.; Gupta, S.; Guryn, W.; Haag, B.; Hamed, A.; Han, L.-X.; Haque, R.; Harris, J. W.; Heppelmann, S.; Hirsch, A.; Hoffmann, G. W.; Hofman, D. J.; Horvat, S.; Huang, B.; Huang, H. Z.; Huang, X.; Huck, P.; Humanic, T. J.; Igo, G.; Jacobs, W. W.; Jang, H.; Judd, E. G.; Kabana, S.; Kalinkin, D.; Kang, K.; Kauder, K.; Ke, H. W.; Keane, D.; Kechechyan, A.; Kesich, A.; Khan, Z. H.; Kikola, D. P.; Kisel, I.; Kisiel, A.; Koetke, D. D.; Kollegger, T.; Konzer, J.; Koralt, I.; Kosarzewski, L. K.; Kotchenda, L.; Kraishan, A. F.; Kravtsov, P.; Krueger, K.; Kulakov, I.; Kumar, L.; Kycia, R. A.; Lamont, M. A. C.; Landgraf, J. M.; Landry, K. D.; Lauret, J.; Lebedev, A.; Lednicky, R.; Lee, J. H.; Li, C.; Li, W.; Li, X.; Li, X.; Li, Y.; Li, Z. M.; Lisa, M. A.; Liu, F.; Ljubicic, T.; Llope, W. J.; Lomnitz, M.; Longacre, R. S.; Luo, X.; Ma, G. L.; Ma, Y. G.; Mahapatra, D. P.; Majka, R.; Margetis, S.; Markert, C.; Masui, H.; Matis, H. S.; McDonald, D.; McShane, T. S.; Minaev, N. G.; Mioduszewski, S.; Mohanty, B.; Mondal, M. M.; Morozov, D. A.; Mustafa, M. K.; Nandi, B. K.; Nasim, Md.; Nayak, T. K.; Nelson, J. M.; Nigmatkulov, G.; Nogach, L. V.; Noh, S. Y.; Novak, J.; Nurushev, S. B.; Odyniec, G.; Ogawa, A.; Oh, K.; Ohlson, A.; Okorokov, V.; Oldag, E. W.; Olvitt, D. L.; Page, B. S.; Pan, Y. X.; Pandit, Y.; Panebratsev, Y.; Pawlak, T.; Pawlik, B.; Pei, H.; Perkins, C.; Pile, P.; Planinic, M.; Pluta, J.; Poljak, N.; Poniatowska, K.; Porter, J.; Poskanzer, A. M.; Pruthi, N. K.; Przybycien, M.; Putschke, J.; Qiu, H.; Quintero, A.; Ramachandran, S.; Raniwala, R.; Raniwala, S.; Ray, R. L.; Riley, C. K.; Ritter, H. G.; Roberts, J. B.; Rogachevskiy, O. V.; Romero, J. L.; Ross, J. F.; Roy, A.; Ruan, L.; Rusnak, J.; Rusnakova, O.; Sahoo, N. R.; Sahu, P. K.; Sakrejda, I.; Salur, S.; Sandweiss, J.; Sangaline, E.; Sarkar, A.; Schambach, J.; Scharenberg, R. P.; Schmah, A. M.; Schmidke, W. B.; Schmitz, N.; Seger, J.; Seyboth, P.; Shah, N.; Shahaliev, E.; Shanmuganathan, P. V.; Shao, M.; Sharma, B.; Shen, W. Q.; Shi, S. S.; Shou, Q. Y.; Sichtermann, E. P.; Simko, M.; Skoby, M. J.; Smirnov, D.; Smirnov, N.; Solanki, D.; Sorensen, P.; Spinka, H. M.; Srivastava, B.; Stanislaus, T. D. S.; Stevens, J. R.; Stock, R.; Strikhanov, M.; Stringfellow, B.; Sumbera, M.; Sun, X.; Sun, X. M.; Sun, Y.; Sun, Z.; Surrow, B.; Svirida, D. N.; Symons, T. J. M.; Szelezniak, M. A.; Takahashi, J.; Tang, A. H.; Tang, Z.; Tarnowsky, T.; Thomas, J. H.; Timmins, A. R.; Tlusty, D.; Tokarev, M.; Trentalange, S.; Tribble, R. E.; Tribedy, P.; Trzeciak, B. A.; Tsai, O. D.; Turnau, J.; Ullrich, T.; Underwood, D. G.; Van Buren, G.; van Nieuwenhuizen, G.; Vandenbroucke, M.; Vanfossen, J. A.; Varma, R.; Vasconcelos, G. M. S.; Vasiliev, A. N.; Vertesi, R.; Videbæk, F.; Viyogi, Y. P.; Vokal, S.; Vossen, A.; Wada, M.; Wang, F.; Wang, G.; Wang, H.; Wang, J. S.; Wang, X. L.; Wang, Y.; Wang, Y.; Webb, G.; Webb, J. C.; Westfall, G. D.; Wieman, H.; Wissink, S. W.; Witt, R.; Wu, Y. F.; Xiao, Z.; Xie, W.; Xin, K.; Xu, H.; Xu, J.; Xu, N.; Xu, Q. H.; Xu, Y.; Xu, Z.; Yan, W.; Yang, C.; Yang, Y.; Yang, Y.; Ye, Z.; Yepes, P.; Yi, L.; Yip, K.; Yoo, I.-K.; Yu, N.; Zbroszczyk, H.; Zha, W.; Zhang, J. B.; Zhang, J. L.; Zhang, S.; Zhang, X. P.; Zhang, Y.; Zhang, Z. P.; Zhao, F.; Zhao, J.; Zhong, C.; Zhu, X.; Zhu, Y. H.; Zoulkarneeva, Y.; Zyzak, M.; STAR Collaboration

    2015-01-01

    We present Λ Λ correlation measurements in heavy-ion collisions for Au +Au collisions at √{sN N }=200 GeV using the STAR experiment at the Relativistic Heavy-Ion Collider. The Lednický-Lyuboshitz analytical model has been used to fit the data to obtain a source size, a scattering length and an effective range. Implications of the measurement of the Λ Λ correlation function and interaction parameters for dihyperon searches are discussed.

  20. Facile Synthesis of Au Nanocube-CdS Core-Shell Nanocomposites with Enhanced Photocatalytic Activity

    Science.gov (United States)

    Liu, Xiao-Li; Liang, Shan; Li, Min; Yu, Xue-Feng; Zhou, Li; Wang, Qu-Qua

    2014-06-01

    Au nanocube-CdS core-shell nanocomposites are prepared by using a one-pot method in aqueous phase with cetyltrimethylammonium bromide as the surfactant. The extinction properties and photocatalytic activity of Au-CdS nanocomposites are investigated. Compared with the pure Au nanocubes, the Au-CdS nanocomposites exhibit enhanced extinction intensity. Compared with CdS nanoparticles, the Au-CdS nanocomposites exhibit improved photocatalytic activity. Furthermore, the photocatalytic efficiency is even better with the increase in the core size of the Au-CdS nanocomposites. Typically, the photocatalytic efficiency of the Au-CdS with 62 nm sized Au nanocubes is about two times higher than that of the pure CdS. It is believed that the Au-CdS nanocomposites may find potential applications in environmental fields, and this synthesis method can be extended to prepare a wide variety of functional composites with Au cores.

  1. In vitro corrosion of dental Au-based casting alloys in polyvinylpyrrolidone-iodine solution.

    Science.gov (United States)

    Takasusuki, Norio; Ida, Yusuke; Hirose, Yukito; Ochi, Morio; Endo, Kazuhiko

    2013-01-01

    The corrosion and tarnish behaviors of two Au-based casting alloys (ISO type 1 and type 4 Au alloys) and their constituent pure metals, Au, Ag, Cu, Pt, and Pd in a polyvinylpyrrolidone-iodine solution were examined. The two Au alloys actively corroded, and the main anodic reaction for both was dissolution of Au as AuI₂(-). The amount of Au released from the ISO type 1 Au alloy was significantly larger than that from the ISO type 4 Au alloy (Palloy exhibited higher susceptibility to tarnishing than the type 4 alloy. The corrosion forms of the two Au alloys were found to be completely different, i.e., the type 1 alloy exhibited the corrosion attack over the entire exposed surface with a little irregularity whereas the type 4 alloy exhibited typical intergranular corrosion, which was caused by local cells produced by segregation of Pd and Pt.

  2. Au(n)Hg(m) clusters: mercury aurides, gold amalgams, or van der Waals aggregates?

    Science.gov (United States)

    Zaleski-Ejgierd, Patryk; Pyykkö, Pekka

    2009-11-12

    The class of bimetallic clusters, Au(n)M(m) (M = Zn, Cd, Hg), is calculated at the ab initio level using the DFT, RI-MP2, and CCSD(T) methods. For the triatomic Au2M (M = Zn, Cd), the auride-type linear Au-M-Au structures are preferred; for Au2Hg, the linear Au-Au-Hg "amalgam" is preferred. The mixed cation [HgAuHg]+, an analog of the known solid-state species Hg32+, is predicted. For larger Au(n)Hg(m) clusters, the results are similar to the isoelectronic Au(n)M- anions. Several local minima and transition states are identified. All are found to be planar.

  3. Pion, kaon, proton and anti-proton transverse momentum distributions from p+p and d+Au collisions at √SNN = 200 GeV

    International Nuclear Information System (INIS)

    Adams, J.; Adler, C.; Aggarwal, M.M.; Ahammed, Z.; Amonett, J.; Anderson, B.D.; Anderson, M; Arkhipkin, D.; Averichev, G.S.; Badyal, S.K.; Balewski, J.; Barannikova, O.; Barnby, L.S.; Baudot, J.; Bekele, S.; Belaga, V.V.; Bellwied, R.; Berger, J.; Bezverkhny, B.I.; Bhardwaj, S.; Bhaskar, P.; Bhati, A.K.; Bichsel, H.; Billmeier, A.; Bland, L.C.; Blyth, C.O.; Bonner, B.E.; Botje, M.; Boucham, A.; Brandin, A.; Bravar, A.; Cadman, R.V.; Cai, X.Z.; Caines, H.; Calderon de la Barca Sanchez, M.; Carroll, J.; Castillo, J.; Castro, M.; Cebra, D.; Chaloupka, P.; Chattopadhyay, S.; Chen, H.F.; Chen, Y.; Chernenko, S.P.; Cherney, M.; Chikanian, A.; Choi, B.; Christie, W.; Coffin, J.P.; Cormier, T.M.; Cramer, J.G.; Crawford, H.J.; Das, D.; Das, S.; Derevschikov, A.A.; Didenko, L.; Dietel, T.; Dong, X.; Draper, J.E.; Du, F.; Dubey, A.K.; Dunin, V.B.; Dunlop, J.C.; Dutta Majumdar, M.R.; Eckardt, V.; Efimov, L.G.; Emelianov, V.; Engelage, J.; Eppley, G.; Erazmus, B.; Estienne, M.; Fachini, P.; Faine, V.; Faivre, J.; Fatemi, R.; Filimonov, K.; Filip, P.; Finch, E.; Fisyak, Y.; Flierl, D.; Foley, K.J.; Fu, J.; Gagliardi, C.A.; Ganti, M.S.; Gutierrez, T.D.; Gagunashvili, N.; Gans, J.; Gaudichet, L.; Germain, M.; Geurts, F.; Ghazikhanian, V.; Ghosh, P.; Gonzalez, J.E.; Grachov, O.; Grigoriev, V.; Cronstal, S.; Grosnick, D.; Guedon, M.; Guertin, S.M.; Gupta, A.; Gushin, E.; Hallman, T.J.; Hardtke, D.; Harris, J.W.; Heinz, M.; Henry, T.W.; Heppelmann, S.; Herston, T.; Hippolyte, B.; Hirsch, A.; Hjort, E.; Hoffmann, G.W.; Horsley, M.; Huang, H.Z.; Huang, S.L.; Humanic, T.J.; Igo, G.; Ishihara, A.; Jacobs, P.; Jacobs, W.W.; Janik, M.; Johnson, I.; Jones, P.G.; Judd, E.G.; Kabana, S.; Kaneta, M.; Kaplan, M.; Keane, D.; Kiryluk, J.; Kisiel, A.; Klay, J.; Klein, S.R.; Klyachko, A.; Koetke, D.D.; Kollegger, T.; Konstantinov, A.S.; Kopytine, S.M.; Kotchenda, L.; Kovalenko, A.D.; Kramer, M.; Kravtsov, P.; Krueger, K.; Kuhn, C.; Kulikov, A.I.; Kumar, A.

    2003-01-01

    Identified mid-rapidity particle spectra of π ± , K ± , and p((bar p)) from 200 GeV p+p and d+Au collisions are reported. A time-of-flight detector based on multi-gap resistive plate chamber technology is used for particle identification. The particle-species dependence of the Cronin effect is observed to be significantly smaller than that at lower energies. The ratio of the nuclear modification factor (R dAu ) between (p+ (bar p)) and charged hadrons (h) in the transverse momentum range 1.2 T < 3.0 GeV/c is measured to be 1.19 ± 0.05(stat) ± 0.03(syst) in minimum-bias collisions and shows little centrality dependence. The yield ratio of (p + (bar p))/h in minimum-bias d+Au collisions is found to be a factor of 2 lower than that in Au+Au collisions, indicating that the Cronin effect alone is not enough to account for the relative baryon enhancement observed in heavy ion collisions at RHIC

  4. Self-assembly of mono- and bidentate oligoarylene thiols onto polycrystalline Au.

    Science.gov (United States)

    Casalini, S; Berto, M; Leonardi, F; Operamolla, A; Bortolotti, C A; Borsari, M; Sun, W; Di Felice, R; Corni, S; Albonetti, C; Hassan Omar, O; Farinola, G M; Biscarini, F

    2013-10-29

    Four thiolated oligoarylene molecules (i) 4-methoxy-terphenyl-4″-methanethiol (MTM), (ii) 4-methoxy-terphenyl-3″,5″-dimethanethiol (MTD), (iii) 4-nitro-terphenyl-4″-methanethiol (NTM), and (iv) 4-nitro-terphenyl-3″,5″-dimethanethiol (NTD) were synthesized and self-assembled as monolayers (SAMs) on polycrystalline Au electrodes of organic field-effect transistors (OFETs). SAMs were characterized by contact angle and AC/DC electrochemical measurements, whereas atomic force microscopy was used for imaging the pentacene films grown on the coated electrodes. The electrical properties of functionalized OFETs, the electrochemical SAMs features and the morphology of pentacene films were correlated to the molecular organization of the thiolated oligoarylenes on Au, as calculated by means of the density functional theory. This multi-methodological approach allows us to associate the systematic replacement of the SAM anchoring head group (viz. methanethiol and dimethanethiol) and/or terminal tail group (viz. nitro-, -NO2, and methoxy, -OCH3) with the change of the electrical features. The dimethanethiol head group endows SAMs with higher resistive features along with higher surface tensions compared with methanethiol. Furthermore, the different number of thiolated heads affects the kinetics of Au passivation as well as the pentacene morphology. On the other hand, the nitro group confers further distinctive properties, such as the positive shift of both threshold and critical voltages of OFETs with respect to the methoxy one. The latter experimental evidence arise from its electron-withdrawing capability, which has been verified by both DFT calculations and DC electrochemical measurements.

  5. Ultrasonic friction power during thermosonic Au and Cu ball bonding

    International Nuclear Information System (INIS)

    Shah, A; Mayer, M; Zhou, Y; Qin, I; Huynh, C; Meyer, M

    2010-01-01

    The ultrasonic friction power during thermosonic ball bonding with Au and Cu wires, both 25 μm in diameter, is derived with an improved method from experimental measurements during the bonding process. Experimental data include the current delivered to the ultrasonic transducer and the tangential force measured using piezoresistive microsensors integrated close to the Al bonding pad. The improvement results from a new, more accurate method to derive the mechanical compliance of the ultrasonic system. The method employs a bond process modification in which the ultrasonic current is ramped up sequentially in three steps. In the first two steps, the ultrasonic current is set to levels that are too low to cause sliding. The bonding takes place during the third step, when the current is ramped up to the optimum value required for making good quality bonds. The ultrasonic compliance values are derived from the first two steps and are 8.2 ± 0.5 μm N -1 and 7.7 ± 0.5 μm N -1 for the Au and Cu processes, respectively. These values are determined within an average error estimate of ±6%, substantially lower than the ±10% estimated with a previously reported method. The ultrasonic compliance in the case of Au is 6% higher due to the lower elastic modulus of Au compared with that of Cu. Typical maximum values of relative sliding amplitude of ultrasonic friction at the interface are 655 nm and 766 nm for the Au and Cu processes. These values are 81% of the free-air vibration amplitude of the bonding capillary tip for the respective ultrasonic current settings. Due to bond growth, which damps relative motion between the ball and the pad, the final relative amplitude at the bond interface is reduced to 4% of the equivalent free-air amplitude. Even though the maximum value of relative amplitude is 17% higher in the Cu process compared with the Au process, the average total interfacial sliding is 519 μm in the Cu process, which is 31% lower than that in the Au process (759

  6. Au crystal growth on natural occurring Au-Ag aggregate elucidated by means of precession electron diffraction (PED)

    Science.gov (United States)

    Roqué Rosell, Josep; Portillo Serra, Joaquim; Aiglsperger, Thomas; Plana-Ruiz, Sergi; Trifonov, Trifon; Proenza, Joaquín A.

    2018-02-01

    In the present work, a lamella from an Au-Ag aggregate found in Ni-laterites has been examined using Transmission Electron Microscope to produce a series of Precision Electron Diffraction (PED) patterns. The analysis of the structural data obtained, coupled with Energy Dispersive X-ray microanalysis, made it possible to determine the orientation of twinned native gold growing on the Au-Ag aggregate. The native Au crystal domains are found to have grown at the outermost part of the aggregate whereas the inner core of the aggregate is an Au-Ag alloy (∼4 wt% Ag). The submicron structural study of the natural occurring Au aggregate points to the mobilization and precipitation of gold in laterites and provides insights on Au aggregates development at supergene conditions. This manuscript demonstrates the great potential of electron crystallographic analysis, and in particular, PED to study submicron structural features of micron sized mineral aggregates by using the example of a gold grain found in a Ni-laterite deposits.

  7. Amperometric Immunosensor for Carbofuran Detection Based on MWCNTs/GS-PEI-Au and AuNPs-Antibody Conjugate

    Directory of Open Access Journals (Sweden)

    Xiangyou Wang

    2013-04-01

    Full Text Available In this paper, an amperometric immunosensor for the detection of carbofuran was developed. Firstly, multiwall carbon nanotubes (MWCNTs and graphene sheets-ethyleneimine polymer-Au (GS-PEI-Au nanocomposites were modified onto the surface of a glass carbon electrode (GCE via self-assembly. The nanocomposites can increase the surface area of the GCE to capture a large amount of antibody, as well as produce a synergistic effect in the electrochemical performance. Then the modified electrode was coated with gold nanoparticles-antibody conjugate (AuNPs-Ab and blocked with BSA. The monoclonal antibody against carbofuran was covalently immobilized on the AuNPs with glutathione as a spacer arm. The morphologies of the GS-PEI-Au nanocomposites and the fabrication process of the immunosensor were characterized by X-ray diffraction (XRD, ultraviolet and visible absorption spectroscopy (UV-vis and scanning electron microscopy (SEM, respectively. Under optimal conditions, the immunosensor showed a wide linear range, from 0.5 to 500 ng/mL, with a detection limit of 0.03 ng/mL (S/N = 3. The as-constructed immunosensor exhibited notable performance features such as high specificity, good reproducibility, acceptable stability and regeneration performance. The results are mainly due to the excellent properties of MWCNTs, GS-PEI-Au nanocomposites and the covalent immobilization of Ab with free hapten binding sites for further immunoreaction. It provides a new avenue for amperometric immunosensor fabrication.

  8. Enhanced absorption in Au nanoparticles/a-Si:H/c-Si heterojunction solar cells exploiting Au surface plasmon resonance

    Energy Technology Data Exchange (ETDEWEB)

    Losurdo, Maria; Giangregorio, Maria M.; Bianco, Giuseppe V.; Sacchetti, Alberto; Capezzuto, Pio; Bruno, Giovanni [Institute of Inorganic Methodologies and of Plasmas, IMIP-CNR, via Orabona 4, 70126 Bari (Italy)

    2009-10-15

    Au nanoparticles (NPs)/(n-type)a-Si:H/(p-type)c-Si heterojunctions have been deposited combining plasma-enhanced chemical-vapour deposition (PECVD) with Au sputtering. We demonstrate that a density of {proportional_to}1.3 x 10{sup 11} cm{sup -2} of Au nanoparticles with an approximately 20 nm diameter deposited onto (n-type)a-Si:H/(p-type)c-Si heterojunctions enhance performance exploiting the improved absorption of light by the surface plasmon resonance of Au NPs. In particular, Au NPs/(n-type)a-Si:H/(p-type)c-Si show an enhancement of 20% in the short-circuit current, J{sub SC}, 25% in the power output, P{sub max} and 3% in the fill factor, FF, compared to heterojunctions without Au NPs. Structures have been characterized by spectroscopic ellipsometry, atomic force microscopy and current-voltage (I-V) measurements to correlate the plasmon resonance-induced enhanced absorption of light with photovoltaic performance. (author)

  9. Jet-hadron correlations in √[s(NN)]=200  GeV p+p and central Au+Au collisions.

    Science.gov (United States)

    Adamczyk, L; Adkins, J K; Agakishiev, G; Aggarwal, M M; Ahammed, Z; Alekseev, I; Alford, J; Anson, C D; Aparin, A; Arkhipkin, D; Aschenauer, E C; Averichev, G S; Banerjee, A; Beavis, D R; Bellwied, R; Bhasin, A; Bhati, A K; Bhattarai, P; Bichsel, H; Bielcik, J; Bielcikova, J; Bland, L C; Bordyuzhin, I G; Borowski, W; Bouchet, J; Brandin, A V; Brovko, S G; Bültmann, S; Bunzarov, I; Burton, T P; Butterworth, J; Caines, H; Calderón de la Barca Sánchez, M; Cebra, D; Cendejas, R; Cervantes, M C; Chaloupka, P; Chang, Z; Chattopadhyay, S; Chen, H F; Chen, J H; Chen, L; Cheng, J; Cherney, M; Chikanian, A; Christie, W; Chwastowski, J; Codrington, M J M; Contin, G; Cramer, J G; Crawford, H J; Cui, X; Das, S; Davila Leyva, A; De Silva, L C; Debbe, R R; Dedovich, T G; Deng, J; Derevschikov, A A; Derradi de Souza, R; Dhamija, S; di Ruzza, B; Didenko, L; Dilks, C; Ding, F; Djawotho, P; Dong, X; Drachenberg, J L; Draper, J E; Du, C M; Dunkelberger, L E; Dunlop, J C; Efimov, L G; Engelage, J; Engle, K S; Eppley, G; Eun, L; Evdokimov, O; Eyser, O; Fatemi, R; Fazio, S; Fedorisin, J; Filip, P; Finch, E; Fisyak, Y; Flores, C E; Gagliardi, C A; Gangadharan, D R; Garand, D; Geurts, F; Gibson, A; Girard, M; Gliske, S; Greiner, L; Grosnick, D; Gunarathne, D S; Guo, Y; Gupta, A; Gupta, S; Guryn, W; Haag, B; Hamed, A; Han, L-X; Haque, R; Harris, J W; Heppelmann, S; Hirsch, A; Hoffmann, G W; Hofman, D J; Horvat, S; Huang, B; Huang, H Z; Huang, X; Huck, P; Humanic, T J; Igo, G; Jacobs, W W; Jang, H; Judd, E G; Kabana, S; Kalinkin, D; Kang, K; Kauder, K; Ke, H W; Keane, D; Kechechyan, A; Kesich, A; Khan, Z H; Kikola, D P; Kisel, I; Kisiel, A; Koetke, D D; Kollegger, T; Konzer, J; Koralt, I; Kotchenda, L; Kraishan, A F; Kravtsov, P; Krueger, K; Kulakov, I; Kumar, L; Kycia, R A; Lamont, M A C; Landgraf, J M; Landry, K D; Lauret, J; Lebedev, A; Lednicky, R; Lee, J H; LeVine, M J; Li, C; Li, W; Li, X; Li, X; Li, Y; Li, Z M; Lisa, M A; Liu, F; Ljubicic, T; Llope, W J; Lomnitz, M; Longacre, R S; Luo, X; Ma, G L; Ma, Y G; Madagodagettige Don, D M M D; Mahapatra, D P; Majka, R; Margetis, S; Markert, C; Masui, H; Matis, H S; McDonald, D; McShane, T S; Minaev, N G; Mioduszewski, S; Mohanty, B; Mondal, M M; Morozov, D A; Mustafa, M K; Nandi, B K; Nasim, Md; Nayak, T K; Nelson, J M; Nigmatkulov, G; Nogach, L V; Noh, S Y; Novak, J; Nurushev, S B; Odyniec, G; Ogawa, A; Oh, K; Ohlson, A; Okorokov, V; Oldag, E W; Olvitt, D L; Pachr, M; Page, B S; Pal, S K; Pan, Y X; Pandit, Y; Panebratsev, Y; Pawlak, T; Pawlik, B; Pei, H; Perkins, C; Peryt, W; Pile, P; Planinic, M; Pluta, J; Poljak, N; Porter, J; Poskanzer, A M; Pruthi, N K; Przybycien, M; Pujahari, P R; Putschke, J; Qiu, H; Quintero, A; Ramachandran, S; Raniwala, R; Raniwala, S; Ray, R L; Riley, C K; Ritter, H G; Roberts, J B; Rogachevskiy, O V; Romero, J L; Ross, J F; Roy, A; Ruan, L; Rusnak, J; Rusnakova, O; Sahoo, N R; Sahu, P K; Sakrejda, I; Salur, S; Sandweiss, J; Sangaline, E; Sarkar, A; Schambach, J; Scharenberg, R P; Schmah, A M; Schmidke, W B; Schmitz, N; Seger, J; Seyboth, P; Shah, N; Shahaliev, E; Shanmuganathan, P V; Shao, M; Sharma, B; Shen, W Q; Shi, S S; Shou, Q Y; Sichtermann, E P; Singaraju, R N; Skoby, M J; Smirnov, D; Smirnov, N; Solanki, D; Sorensen, P; Spinka, H M; Srivastava, B; Stanislaus, T D S; Stevens, J R; Stock, R; Strikhanov, M; Stringfellow, B; Sumbera, M; Sun, X; Sun, X M; Sun, Y; Sun, Z; Surrow, B; Svirida, D N; Symons, T J M; Szelezniak, M A; Takahashi, J; Tang, A H; Tang, Z; Tarnowsky, T; Thomas, J H; Timmins, A R; Tlusty, D; Tokarev, M; Trentalange, S; Tribble, R E; Tribedy, P; Trzeciak, B A; Tsai, O D; Turnau, J; Ullrich, T; Underwood, D G; Van Buren, G; van Nieuwenhuizen, G; Vandenbroucke, M; Vanfossen, J A; Varma, R; Vasconcelos, G M S; Vasiliev, A N; Vertesi, R; Videbæk, F; Viyogi, Y P; Vokal, S; Vossen, A; Wada, M; Wang, F; Wang, G; Wang, H; Wang, J S; Wang, X L; Wang, Y; Wang, Y; Webb, G; Webb, J C; Westfall, G D; Wieman, H; Wissink, S W; Witt, R; Wu, Y F; Xiao, Z; Xie, W; Xin, K; Xu, H; Xu, J; Xu, N; Xu, Q H; Xu, Y; Xu, Z; Yan, W; Yang, C; Yang, Y; Yang, Y; Ye, Z; Yepes, P; Yi, L; Yip, K; Yoo, I-K; Yu, N; Zawisza, Y; Zbroszczyk, H; Zha, W; Zhang, J B; Zhang, J L; Zhang, S; Zhang, X P; Zhang, Y; Zhang, Z P; Zhao, F; Zhao, J; Zhong, C; Zhu, X; Zhu, Y H; Zoulkarneeva, Y; Zyzak, M

    2014-03-28

    Azimuthal angular correlations of charged hadrons with respect to the axis of a reconstructed (trigger) jet in Au+Au and p+p collisions at √[s(NN)]=200  GeV in STAR are presented. The trigger jet population in Au+Au collisions is biased toward jets that have not interacted with the medium, allowing easier matching of jet energies between Au+Au and p+p collisions while enhancing medium effects on the recoil jet. The associated hadron yield of the recoil jet is significantly suppressed at high transverse momentum (pTassoc) and enhanced at low pTassoc in 0%-20% central Au+Au collisions compared to p+p collisions, which is indicative of medium-induced parton energy loss in ultrarelativistic heavy-ion collisions.

  10. Resistant Hypertension.

    Science.gov (United States)

    Doroszko, Adrian; Janus, Agnieszka; Szahidewicz-Krupska, Ewa; Mazur, Grzegorz; Derkacz, Arkadiusz

    2016-01-01

    Resistant hypertension is a severe medical condition which is estimated to appear in 9-18% of hypertensive patients. Due to higher cardiovascular risk, this disorder requires special diagnosis and treatment. The heterogeneous etiology, risk factors and comorbidities of resistant hypertension stand in need of sophisticated evaluation to confirm the diagnosis and select the best therapeutic options, which should consider lifestyle modifications as well as pharmacological and interventional treatment. After having excluded pseudohypertension, inappropriate blood pressure measurement and control as well as the white coat effect, suspicion of resistant hypertension requires an analysis of drugs which the hypertensive patient is treated with. According to one definition - ineffective treatment with 3 or more antihypertensive drugs including diuretics makes it possible to diagnose resistant hypertension. A multidrug therapy including angiotensin - converting enzyme inhibitors, angiotensin II receptor blockers, beta blockers, diuretics, long-acting calcium channel blockers and mineralocorticoid receptor antagonists has been demonstrated to be effective in resistant hypertension treatment. Nevertheless, optional, innovative therapies, e.g. a renal denervation or baroreflex activation, may create a novel pathway of blood pressure lowering procedures. The right diagnosis of this disease needs to eliminate the secondary causes of resistant hypertension e.g. obstructive sleep apnea, atherosclerosis and renal or hormonal disorders. This paper briefly summarizes the identification of the causes of resistant hypertension and therapeutic strategies, which may contribute to the proper diagnosis and an improvement of the long term management of resistant hypertension.

  11. Managing Resistance.

    Science.gov (United States)

    Maag, John W.

    2000-01-01

    This article presents some considerations and ideas for managing students' resistance. They are organized around four topics: the impact of context on behavior, the importance of being comprehensive and nonrestrictive in behavior, the adaptive function of resistant behavior, and the benefit of joining children in their frame of reference.…

  12. Evaluation of cross sections for 197Au(n,3n) and 197Au(n,4n) reactions from threshold to 50 MeV

    International Nuclear Information System (INIS)

    Yu Baosheng; Shen Qingbiao; Cai Dunjiu

    1994-01-01

    The measured data of cross sections for 197 Au(n,3n) and 197 Au(n,4n) reactions were collected and analysed. The theoretical calculations of above mentioned reactions were carried out to predict the data in higher energy region. The sets of cross sections for 197 Au(n,3n) and 197 Au(n,4n) reactions from threshold to 50 MeV were recommended on the basis of the experimental and calculated data. (2 figs)

  13. Nuclear modification factors of phi mesons in d+Au, Cu+Cu and Au+Au collisions at sqrt(S_NN)=200 GeV

    Czech Academy of Sciences Publication Activity Database

    Adare, A.; Afanasiev, S.; Aidala, C.; Mašek, L.; Mikeš, P.; Růžička, Pavel; Tomášek, Lukáš; Vrba, Václav

    2011-01-01

    Roč. 83, č. 2 (2011), "024909-1"-"024909-10" ISSN 0556-2813 R&D Projects: GA MŠk LA08015 Institutional research plan: CEZ:AV0Z10100502 Keywords : PHENIX experiment * d+AU collisions Subject RIV: BF - Elementary Particles and High Energy Physics Impact factor: 3.308, year: 2011

  14. Characterization of the Resistance and Force of a Carbon Nanotube/Metal Side Contact by Nanomanipulation

    OpenAIRE

    Yu, Ning; Nakajima, Masahiro; Shi, Qing; Yang, Zhan; Wang, Huaping; Sun, Lining; Huang, Qiang; Fukuda, Toshio

    2017-01-01

    A high contact resistance restricts the application of carbon nanotubes (CNTs) in fabrication of field-effect transistors (FETs). Thus, it is important to decrease the contact resistance and investigate the critical influence factors such as the contact length and contact force. This study uses nanomanipulation to characterize both the resistance and the force at a CNT/Au side-contact interface inside a scanning electron microscopy (SEM). Two-terminal CNT manipulation methods, and models for ...

  15. Hydrothermal Cation Exchange Enabled Gradual Evolution of Au@ZnS–AgAuS Yolk–Shell Nanocrystals and Their Visible Light Photocatalytic Applications

    Science.gov (United States)

    Feng, Jingwen; Liu, Jia; Cheng, Xiaoyan; Liu, Jiajia; Xu, Meng

    2017-01-01

    Abstract Yolk–shell hybrid nanoparticles with noble metal core and programmed semiconductor shell composition may exhibit synergistic effects and tunable catalytic properties. In this work, the hydrothermal cation exchange synthesis of Au@ZnS–AgAuS yolk–shell nanocrystals (Y–S NCs) with well‐fabricated void size, grain‐boundary‐architectured ZnS–AgAuS shell and in situ generated Au cocatalyst are demonstrated. Starting from the novel cavity‐free Au@AgAuS core‐shell NCs, via aqueous cation exchange reaction with Zn2+, the gradual evolution with produced Au@ZnS–AgAuS Y–S NCs can be achieved successfully. This unprecedented evolution can be reasonably explained by cation exchange initialized chemical etching of Au core, followed by the diffusion through the shell to be AgAuS and then ZnS. By hydrothermal treatment provided optimal redox environment, Au ions in shell were partially reduced to be Au NCs on the surface. The UV–vis absorption spectra evolution and visible light photocatalytic performances, including improved photodegradation behavior and photocatalytic hydrogen evolution activity, have demonstrated their potential applications. This new one‐pot way to get diverse heterointerfaces for better photoinduced electron/hole separation synergistically can be anticipated for more kinds of photocatalytic organic synthesis. PMID:29375968

  16. Hydrothermal Cation Exchange Enabled Gradual Evolution of Au@ZnS-AgAuS Yolk-Shell Nanocrystals and Their Visible Light Photocatalytic Applications.

    Science.gov (United States)

    Feng, Jingwen; Liu, Jia; Cheng, Xiaoyan; Liu, Jiajia; Xu, Meng; Zhang, Jiatao

    2018-01-01

    Yolk-shell hybrid nanoparticles with noble metal core and programmed semiconductor shell composition may exhibit synergistic effects and tunable catalytic properties. In this work, the hydrothermal cation exchange synthesis of Au@ZnS-AgAuS yolk-shell nanocrystals (Y-S NCs) with well-fabricated void size, grain-boundary-architectured ZnS-AgAuS shell and in situ generated Au cocatalyst are demonstrated. Starting from the novel cavity-free Au@AgAuS core-shell NCs, via aqueous cation exchange reaction with Zn 2+ , the gradual evolution with produced Au@ZnS-AgAuS Y-S NCs can be achieved successfully. This unprecedented evolution can be reasonably explained by cation exchange initialized chemical etching of Au core, followed by the diffusion through the shell to be AgAuS and then ZnS. By hydrothermal treatment provided optimal redox environment, Au ions in shell were partially reduced to be Au NCs on the surface. The UV-vis absorption spectra evolution and visible light photocatalytic performances, including improved photodegradation behavior and photocatalytic hydrogen evolution activity, have demonstrated their potential applications. This new one-pot way to get diverse heterointerfaces for better photoinduced electron/hole separation synergistically can be anticipated for more kinds of photocatalytic organic synthesis.

  17. Au3+/Au0 Supported on Chromium(III Terephthalate Metal Organic Framework (MIL-101 as an Efficient Heterogeneous Catalystfor Three-Component Coupling Synthesis of Propargylamines

    Directory of Open Access Journals (Sweden)

    Lili Liu

    2017-01-01

    Full Text Available Post-synthesis modification is a useful method for the functionalization of metal–organic frameworks (MOFs. A novel catalyst Au@MIL-101-ED-SA (ED = ethylenediamine, SA = salicylaldehyde, containing coexisting Au3+ ions and Au0 nanoparticles, was prepared successfully by post-synthesis modification with ethylenediamine, salicylaldehyde and gold. Gold nanoparticles supported on MIL-101 (Au@MIL-101 were prepared successfully by the impregnation method. Au@MIL-101-ED-SA and Au@MIL-101 were characterized by N2 adsorption–desorption, X-ray diffraction, infrared spectroscopy, thermogravimetric analysis, X-ray photoelectron spectroscopy, and inductively coupled plasma-optical emission spectrometry. Au@MIL-101-ED-SA and Au@MIL-101 were applied as environmentally friendly catalysts in the three-component coupling reaction of aldehydes, amines, and alkynes for the preparation of diverse propargylamines. Au@MIL-101-ED-SA contained a fraction of cationic gold (Au3+/Au0 = 0.9 and showed higher catalytic activity than Au@MIL-101, which was prepared by the impregnation method. Furthermore, the reactions were performed under heterogeneous conditions and the novel catalyst was successfully recycled for four consecutive runs.

  18. Structure investigation of organic molecules on Au(111) surfaces; Strukturuntersuchung organischer Molekuele auf Au(111)-Oberflaechen

    Energy Technology Data Exchange (ETDEWEB)

    Kazempoor, Michel

    2009-02-02

    The present work covers two topics namely the coadsorption of formic acid and water on Au(111) and the structure of biphenylalkanthiole SAMs on Au(111) surfaces. The coadsorption of formic acid and water on Au(111) surfaces has been investigated by means of vibrational and photoelectron spectroscopy (HREELS, XPS). Formic acid adsorbs at 90 K molecularly with vibrational modes characteristic for flat lying zig-zag chains in the mono- and multilayer regime, like in solid formic acid. The structure of the flat lying formic acid chains was determined by low energy electron diffraction (LEED) as a (2r3 x r19) unit cell. Annealing results in a complete desorption at 190 K. Sequential adsorption of formic acid and water at 90 K shows no significant chemical interaction. Upon annealing the coadsorbed layer to 140 K a hydrogenbonded cyclic complex of formic acid with one water molecule could be identified using isotopically labelled adsorbates. Upon further annealing this complex decomposes leaving molecularly adsorbed formic acid on the surface at 160 K, accompanied by a proton exchange between formic acid and water. The influence of the alkane spacer chain length on the structure of biphenylalkanethiols on Au(111) surfaces was investigated as well. A systematic study was done on BPn-SAMs deposited from the gas phase. For every chain length a structure was found by LEED. Furthermore the influence of temperature on the structure was investigated in the range from room temperature up to about 400 K. To obviate influences from different preparation methods BP3 and BP4 was deposited from gas phase and from solution. No LEED spots were observed on BP4 SAMs deposited from solution. For BP3 an influence of the preparation could be excluded. For all BPn-SAMs a good agreement between LEED and STM data's was found. Nevertheless different unit cells were determined by LEED and STM consistent structures could be suggested considering the unit cell size given by LEED and the

  19. Drowned reefs and antecedent karst topography, Au'au channel, S.E. Hawaiian Islands

    Science.gov (United States)

    Grigg, R.W.; Grossman, E.E.; Earle, S.A.; Gittings, S.R.; Lott, D.; McDonough, J.

    2002-01-01

    During the last glacial maximum (LGM), about 21,000 years ago, the Hawaiian Islands of Maui, Lanai, and Molokai were interconnected by limestone bridges, creating a super-island known as Maui-Nui. Approximately 120 m of sea-level rise during the Holocene Transgression flooded, and then drowned, these bridges separating the islands by inter-island channels. A new multibeam high-resolution bathymetric survey of the channels between the islands, coupled with observations and video-transects utilizing DeepWorker-2000 submersibles, has revealed the existence of numerous drowned reef features including concentric solution basins, solution ridges (rims), sand and sediment plains, and conical-shaped reef pinnacles. The concentric basins contain flat lagoon-like bottoms that are rimmed by steep-sided limestone walls. Undercut notches rim the basins at several depths, marking either sea-level still stands or paleo-lake levels. All of the solution basins shallower than 120 m were subaerial at the LGM, and at one stage or another may have been shallow shoreline lakes. Today, about 70 drowned reef pinnacles are scattered across the Maui-Lanai underwater bridge and all are situated in wave-sheltered positions. Most drowned during the interval between 14,000 and 10,000 years ago when sea-level rise averaged 15 mm/year. Virtually all of the surficial topography in the Au'au Channel today is a product of karst processes accentuated by marginal reef growth during the Holocene. Both the submerged basins and the drowned reefs represent an archive of sea-level and climate history in Hawaii during the late Quaternary.

  20. L'APPRENTISSAGE AU CERN - French version only

    CERN Multimedia

    2003-01-01

    APPRENTISSAGES TECHNIQUES FORMATION ET DEVELOPPEMENT HR/TD/AP L'APPRENTISSAGE AU CERN pour les professions d'électronicien(ne) et de laborantin(e) en physique L'apprentissage au CERN est régi par les lois, règlements et contrats en vigueur dans le Canton de Genève. En cas de réussite à l'examen de fin d'apprentissage, les apprentis obtiennent le Certificat Fédéral de Capacité Suisse (CFC). 7 places au total sont ouvertes au recrutement pour les deux professions. L'apprentissage dure 4 ans. Minima requis pour faire acte de candidature : - avoir terminé la scolarité obligatoire - être ressortissant d'un pays membre du CERN (Allemagne, Autriche, Belgique, Bulgarie, Danemark, Espagne, Finlande, France, Grèce, Hongrie, Italie, Norvège, Pays-Bas, Pologne, Portugal, République slovaque, République tchèque, Royaume-Uni, Suède, Suisse) - avoir au moins 15 ans et moins de 21 ans à la date de début de l'apprentissage - avoir un niveau scolaire correspondant à la 9ème générale ou moderne...

  1. Electronic and magnetic properties of MnAu nanoparticles

    International Nuclear Information System (INIS)

    Masrour, R.; Hlil, E.K.; Hamedoun, M.; Benyoussef, A.; Mounkachi, O; El moussaoui, H.

    2014-01-01

    Self-consistent ab initio calculations, based on DFT (Density Functional Theory) approach and using FLAPW (Full potential Linear Augmented Plane Wave) method, are performed to investigate both electronic and magnetic properties of the MnAu nanoparticles. Polarized spin is included in calculations within the framework of the antiferromagnetic. The Mn magnetic moments where considered to be along c axes. Obtained data from ab initio calculations are used as input for the high temperature series expansions (HTSEs) calculations to compute other magnetic parameters. The zero-field high temperature static susceptibility series of the magnetic moment (m) and nearest-neighbour Heisenberg and XY models on a MnAu nanoparticles is thoroughly analyzed by means of a power series coherent anomaly method (CAM) for different nanoparticles. The exchanges interactions between the magnetic atoms are obtained for MnAu nanoparticles. - Highlights: • The electronic properties of the MnAu nanoparticles are studied using the DFT and FLAPW. • Magnetic moment is computed. • The ab initio calculations are used as input for HTSEs to compute other magnetic parameters. • The exchanges interactions and blocking temperature are obtained for MnAu nanoparticles

  2. Exotic high activity surface patterns in PtAu nanoclusters

    KAUST Repository

    Mokkath, Junais Habeeb

    2013-05-09

    The structure and chemical ordering of PtAu nanoclusters of 79, 135, and 201 atoms are studied via a combination of a basin hopping atom-exchange technique (to locate the lowest energy homotops at fixed composition), a symmetry orbit technique (to find the high symmetry isomers), and density functional theory local reoptimization (for determining the most stable homotop). The interatomic interactions between Pt and Au are derived from the empirical Gupta potential. The lowest energy structures show a marked tendency toward PtcoreAushell chemical ordering by enrichment of the more cohesive Pt in the core region and of Au in the shell region. We observe a preferential segregation of Pt atoms to (111) facets and Au atoms to (100) facets of the truncated octahedron cluster motif. Exotic surface patterns are obtained particularly for Pt-rich compositions, where Pt atoms are being surrounded by Au atoms. These surface arrangements boost the catalytic activity by creating a large number of active sites. © 2013 American Chemical Society.

  3. DNA origami/gold nanorod hybrid nanostructures for the circumvention of drug resistance.

    Science.gov (United States)

    Song, Linlin; Jiang, Qiao; Liu, Jianbing; Li, Na; Liu, Qing; Dai, Luru; Gao, Yuan; Liu, Weili; Liu, Dongsheng; Ding, Baoquan

    2017-06-14

    We herein demonstrate that DNA origami can work as a multifunctional platform integrating a chemotherapeutic drug (doxorubicin), gold nanorods and a tumour-specific aptamer MUC-1, to realize the effective circumvention of drug resistance. Doxorubicin (DOX) was loaded efficiently onto DNA origami through base pair intercalation and surface-modified gold nanorods (AuNRs) were assembled onto the DNA origami through DNA hybridization. Due to the active targeting effect of the assembled aptamers, the multifunctional nanostructures achieved increased cellular internalization of DOX and AuNRs. Upon near-infrared (NIR) laser irradiation, the P-glycoprotein (multidrug resistance pump) expression of multidrug resistant MCF-7 (MCF-7/ADR) cells was down-regulated, achieving the synergistically chemotherapeutic (DOX) and photothermal (AuNRs) effects.

  4. Si Incorporation in InP Nanowires Grown by Au-Assisted Molecular Beam Epitaxy

    Directory of Open Access Journals (Sweden)

    Lorenzo Rigutti

    2009-01-01

    Full Text Available We report on the growth, structural characterization, and conductivity studies of Si-doped InP nanowires grown by Au-assisted molecular beam epitaxy. It is shown that Si doping reduces the mean diffusion length of adatoms on the lateral nanowire surface and consequently reduces the nanowire growth rate and promotes lateral growth. A resistivity as low as 5.1±0.3×10−5 Ω⋅cm is measured for highly doped nanowires. Two dopant incorporation mechanisms are discussed: incorporation via catalyst particle and direct incorporation on the nanowire sidewalls. The first mechanism is shown to be less efficient than the second one, resulting in inhomogeneous radial dopant distribution.

  5. Hot-electron effect in PdAu thin-film resistors with attached cooling fins

    International Nuclear Information System (INIS)

    Pleikies, J; Flokstra, J; Usenko, O; Frossati, G; Stolz, R; Fritzsch, L

    2009-01-01

    The sensitivity of superconducting electronics operated in the sub-Kelvin temperature range is usually limited by the hot-electron effect. Here, an increased thermal resistance due to a weakened electron-phonon coupling leads to a higher temperature of the electrons in the thin-film shunt resistors of the Josephson junctions. Cooling fins can be attached to weaken this effect. We characterized different configurations of resistors in PdAu with or without attached cooling fins by dissipating power and determining the effective electron temperature. This was done by directly measuring the Johnson noise with a SQUID amplifier. The results are compared to theory and numerical calculations on the electronic heat transport. The latter turns out to be a useful tool for the optimization of the thermal design of superconducting electronics.

  6. Characterization of Mo/Au Transition-Edge Sensors with Different Geometric Configurations

    Science.gov (United States)

    Smith, S. J.; Adams, J. S.; Bandler, S. R.; Busch, S. E.; Chervenak, J. A.; Eckart, M. E.; Finkbeiner, F. M.; Kelley, R. L.; Kilbourne, C. A.; Lee, S. J.; Porst, J.-P.; Porter, F. S.; Sadleir, J. E.

    2014-08-01

    Mo/Au transition-edge sensors exhibit weak-link behavior in the measured temperature, and field, dependence of the critical current . This is a consequence of the longitudinal proximitization between the Nb electrical bias contacts and the bilayer. Understanding how weak-link superconductivity impacts the resistive transition and the detector energy resolution is of great interest. In this contribution we present studies of for three devices that have different geometries of metallic depositions on top of the sensor used for noise mitigation and X-ray absorption. Results show that these features change the measured compared to the previously seen measurements on devices without additional deposition layers. Measurements of the small signal transition parameters and also reveal differences between designs that impact the measured response to X-rays and energy resolution.

  7. Cascade defect production and irradiation enhanced diffusion in Cu3Au

    International Nuclear Information System (INIS)

    Kirk, M.A.; Funk, L.L.

    1986-03-01

    By using the ordering alloy Cu 3 Au and measuring resistivity changes during and following fast-neutron irradiations at IPNS, we have studied cascade defect production and irradiation enhanced diffusion between 10 and 460 0 K. Ordering and disordering rates were measured as functions of irradiation temperature, neutron dose, neutron dose rate, time following cessation of flux, and step annealing. Free and clustered vacancy production was observed. The temperature dependence of the production of total migrating vacancy concentrations was determined. Vacancy sink production was linear with neutron dose and is compared with recent transmission electron microscopy experiments on the production of dislocation loops in this alloy. Time dependent and quasi-steady state vacancy concentrations were measured and compared with solutions of reaction rate equations for irradiation enhanced diffusion. The influence of recombination of vacancies with interstitials is observed at low sink concentrations (low neutron doses)

  8. Reusable urine glucose sensor based on functionalized graphene oxide conjugated Au electrode with protective layers

    Directory of Open Access Journals (Sweden)

    Hye Youn Kim

    2014-09-01

    Full Text Available An electrochemical based system with multiple layers coated on a functionalized graphene oxide Au electrode was developed to measure glucose concentration in urine in a more stable way. Two types of gold printed circuit boards were fabricated and graphene oxide was immobilized on their surface by chemical adsorption. Multiple layers, composed of a couple of polymers, were uniformly coated on the surface electrode. This device exhibited higher electrochemical responses against glucose, a greater resistivity in the presence of interferential substances in urine, and durable stabilities for longer periods of time than conventional units. The efficiency in current level according to the order and ratio of solution was evaluated during the immobilization of the layer. The fabricated electrodes were then also evaluated using hyperglycemic clinical samples and compared with the patterns of blood glucose measured with commercially available glucose meters. Our findings show that not only was their pattern similar but this similarity is well correlated.

  9. Electrical and humidity characterization of m-NA doped Au/PVA nanocomposites.

    Science.gov (United States)

    Fuke, Madhavi V; Adhyapak, P V; Mulik, U P; Amalnerkar, D P; Aiyer, R C

    2009-04-30

    The Meta-Nitroaniline (m-NA) doped (by varying weight percentage (wt. %)) gold/polyvinyl alcohol (Au/PVA) nanocomposites were synthesized using gold salt and hydrazine hydrate (HH) by in situ process. The composite was coated on ceramic rods having two end electrodes by drop casting method for studying their electrical behavior at different relative humidity (RH) levels, ranging from 4 to 95% RH at room temperature. The optimized wt. % was used to prepare coatings of various thicknesses (20-40 microm) of the films. As the humidity decreases, the resistance increases. The low humidity sensing characteristic can be tailored by varying wt. % of m-NA and thicknesses of the nanocomposite films. The resistive-humidity sensor shows two regions of sensitivity having highest sensitivity for lower RH. The sensor response and recovery time is about 6-10s and 52 s respectively. The dynamic range of variation of the resistance allows a promising use of the films as a humidity sensor. The material was characterized by X-ray diffraction (XRD) and impedance spectroscopy at 60% RH.

  10. Structural and electrical properties of an Au film system deposited on silicone oil surfaces

    CERN Document Server

    Yang Bo; Jin Jin Sheng; Ye Quan Lin; Lao Yan Feng; Jiao Zheng Kuan; Ye Gao Xiang

    2002-01-01

    An Au thin film system, deposited on silicone oil surfaces by the thermal deposition method, has been fabricated and its structure as well as electrical properties has been studied. A web-shaped characteristic surface morphology of the films is observed. The dc sheet resistance R of the metal films on the liquid surfaces is measured during and after deposition in situ by the four-probe method. The time dependence of the sheet resistance can be explained in terms of the film growth mechanism on the oil surface. The anomalous I-V characteristics of the film system can be interpreted as a competition among the local Joule heating, hopping and tunnelling effects. It is found that the dc third-harmonic coefficient B sub 0 and the zero-power resistance R sub 0 satisfy the power-law relation B sub 0 propor to R sub 0 sup 2 sup + sup w and the exponent w is close to zero. This result indicates that the hopping and tunnelling effects in the samples are much stronger than those of the other film systems. We also find I...

  11. Au rendez-vous allemand (1

    Directory of Open Access Journals (Sweden)

    Agnès Bouvier

    2010-12-01

    Full Text Available Comment traduire, transporter un monde dans un autre, et y faire croire ? La solution de Flaubert pour Salammbô a été d’investir cette difficulté en se plaçant du côté des discours et récits de l’Antiquité, depuis les Anciens et avec eux, retrouvant la parole de l’autre à partir d’une attitude « sympathique » au savoir recueilli. Cette attitude est conforme aux injonctions contemporaines de la « nouvelle école » critique et historique venue d’Allemagne où la pensée de Herder, relayée par Renan, occupe de ce point de vue une place centrale. L’Histoire de la poésie des Hébreux de Herder, paru en 1783, est traduit en français en 1845. Il s’agit d’un ouvrage fondateur de la critique allemande en ce qu’il aborde le texte sacré dans sa dimension exclusivement textuelle. Son titre même est une invitation à envisager la Bible du point de vue de l’art, c’est-à-dire du côté de ses effets : l’exégèse biblique selon Herder doit passer par le déplacement du lieu critique et le développement chez le lecteur moderne d’une sensibilité esthétique identique à celle du lecteur original.How can you translate or transpose one world into another and make it believable?  Flaubert’s solution for Salammbô was to adopt the point of view of Antiquity.  Going back to Antiquity’s speeches and tales, from and with the Classics and our knowledge of them, he chose a sympathetic stance.  This attitude is in line with contemporary admonitions of the “new” critical and historical school that came from Germany where Herder’s thought, passed on by Renan, had a central role.  Herder’s History of Hebrew Poetry, published in 1783, was translated in 1845.  It is a seminal text of German criticism in that it approaches the sacred text in an exclusively textual dimension.  Even the title of his book is an invitation to consider the Bible from the point of view of art, that is, for its effects.

  12. etude de la résistance au flétrissement bactérien de lignées inter

    African Journals Online (AJOL)

    Administrator

    4p. Mew, T. W., Vera Cruz, C. M. and Reyes, R. C.. 1992. Interaction of Xanthomonas campestris pv. oryzae and a resistance Rice Cultivar. Phytopathology 72: 786-789. Ouedraogo, S. L. Somda, I. Boro, F. et Seré, Y. 2004 Détection et caractérisation des bactéries phytopathogènes transmises par les semences du riz au ...

  13. Hydrogen evolution on Au(111) covered with submonolayers of Pd

    DEFF Research Database (Denmark)

    Björketun, Mårten; Karlberg, Gustav; Rossmeisl, Jan

    2011-01-01

    A theoretical investigation of electrochemical hydrogen evolution on Au(111) covered with submonolayers of Pd is presented. The size and shape of monoatomically high Pd islands formed on the Au(111) surface are determined using Monte Carlo simulations, for Pd coverages varying from 0.02 to 0.95 ML....... The energetics of adsorption and desorption of hydrogen on/from different types of sites on the Pd-Au(111) surface are assessed by means of density functional theory calculations combined with thermodynamic modeling. Based on the density functional and Monte Carlo data, the hydrogen evolution activity...... is evaluated with a micro-kinetic model. The analysis reproduces measured Pd-coverage-dependent activities for Pd submonolayers exceeding similar to 0.15 ML and enables the relative contributions from different types of electrocatalytically active sites to be determined. Finally, the implications of surface...

  14. Triptycene-terminated thiolate and selenolate monolayers on Au(111

    Directory of Open Access Journals (Sweden)

    Jinxuan Liu

    2017-04-01

    Full Text Available To study the implications of highly space-demanding organic moieties on the properties of self-assembled monolayers (SAMs, triptycyl thiolates and selenolates with and without methylene spacers on Au(111 surfaces were comprehensively studied using ultra-high vacuum infrared reflection absorption spectroscopy, X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy and thermal desorption spectroscopy. Due to packing effects, the molecules in all monolayers are substantially tilted. In the presence of a methylene spacer the tilt is slightly less pronounced. The selenolate monolayers exhibit smaller defect densities and therefore are more densely packed than their thiolate analogues. The Se–Au binding energy in the investigated SAMs was found to be higher than the S–Au binding energy.

  15. Growth model of Au films on Ru(001)

    International Nuclear Information System (INIS)

    Canessa, E.; Calmetta, A.

    1992-06-01

    In an attempt to find generic features on the fractal growth of Au films deposited on Ru(001), a simple simulation model based on irreversible diffusion-limited aggregation (DLA) is discussed. Highly irregular two-dimensional dentritic islands of Au particles that gradually grow on a larger host lattice of Ru particles and have fractal dimension d f approx. 1.70 each, are generated via a multiple had-hoc version of the DLA algorithm for single aggregates. Annealing effects on the islands morphology are reproduced assuming different sticking probabilities at nearest-neighbour lattice sites of Au films on Ru(001). Using simulation data, islands growth are described in analogy to diffusion-limited, precipitate growth with soft impingement of precipities. This leads to analyse thin film island growth kinetics in such fractal systems and to predict a main peak in scattering intensity patterns due to interisland interference. (author). 12 refs, 4 figs

  16. Controlled electrodeposition of Au monolayer film on ionic liquid

    Science.gov (United States)

    Ma, Qiang; Pang, Liuqing; Li, Man; Zhang, Yunxia; Ren, Xianpei; Liu, Shengzhong Frank

    2016-05-01

    Gold (Au) nanoparticles have been attractive for centuries for their vibrant appearance enhanced by their interaction with sunlight. Nowadays, there have been tremendous research efforts to develop them for high-tech applications including therapeutic agents, sensors, organic photovoltaics, medical applications, electronics and catalysis. However, there remains to be a challenge to fabricate a monolayer Au coating with complete coverage in controlled fashion. Here we present a facile method to deposit a uniform Au monolayer (ML) film on the [BMIM][PF6] ionic liquid substrate using an electrochemical deposition process. It demonstrates that it is feasible to prepare a solid phase coating on the liquid-based substrate. Moreover, the thickness of the monolayer coating can be controlled to a layer-by-layer accuracy.

  17. Antimicrobial Resistance

    Science.gov (United States)

    ... life-threatening infections – to a last resort treatment (carbapenem antibiotics) has spread to all regions of the ... unit patients. In some countries, because of resistance, carbapenem antibiotics do not work in more than half ...

  18. Final Technical Report: First Principles Investigations for the Ensemble Effects of PdAu and PtAu Bimetallic Nanocatalysts

    Energy Technology Data Exchange (ETDEWEB)

    Ruqian Wu

    2012-05-18

    Bimetallic surfaces with tunable chemical properties have attracted broad attention in recent years due to their ample potential for heterogeneous catalysis applications. The local chemical properties of constituents are strongly altered from their parent metals by 'ligand effect', a term encompassing the influences of charge transfer, orbital rehybridization and lattice strain. In comparison to the aforementioned, the 'ensemble effect' associated with particular arrangements of the active constituents have received much less attention, despite their notable importance towards the determination of reactivity and selectivity of bimetallic catalysts. We performed theoretical studies for understanding the ensemble effects on bimetallic catalysis: (i) simulations for the formation of different ensembles on PdAu and PtAu nanoclusters; (ii) studies of the size, shape, and substrate dependence of their electronic properties; and (iii) simulations for model reactions such as CO oxidation, methanol, ethylene and water dehydrogenation on PdAu and PtAu nanoclusters. In close collaboration with leading experimental groups, our theoretical research elucidated the fundamentals of Au based bimetallic nanocatalysts.

  19. A redox-switchable Au8-cluster sensor.

    Science.gov (United States)

    Wu, Te-Haw; Hsu, Yu-Yen; Lin, Shu-Yi

    2012-07-09

    The proof of concept of a simple sensing platform based on the fluorescence of a gold cluster consisting of eight atoms, which is easily manipulated by reduction and oxidation of a specific molecule in the absence of chemical linkers, is demonstrated. Without using any coupling reagents to arrange the distance of the donor-acceptor pair, the fluorescence of the Au(8) -cluster is immediately switched off in the presence of 2-pyridinethiol (2-PyT) quencher. Through an upward-curving Stern-Volmer plot, the system shows complex fluorescence quenching with a combination of static and dynamic quenching processes. To analyze the static quenching constant (V) by a "sphere of action" model, the collisional encounter between the Au(8) -cluster and 2-PyT presents a quenching radius (r) ≈5.8 nm, which is larger than the sum of the radii of the Au(8) -cluster and 2-PyT. This implies that fluorescence quenching can occur even though the Au(8) -cluster and 2-PyT are not very close to each other. The quenching pathway may be derived from a photoinduced electron-transfer process of the encounter pair between the Au(8) -cluster (as an electron donor) and 2-PyT (as an electron acceptor) to allow efficient fluorescence quenching in the absence of coupling reagents. Interestingly, the fluorescence is restored by oxidation of 2-PyT to form the corresponding disulfide compound and then quenched again after the reduction of the disulfide. This redox-switchable fluorescent Au(8) -cluster platform is a novel discovery, and its utility as a promising sensor for detecting H(2) O(2) -generating enzymatic transformations is demonstrated. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Defect-induced Au precipitation in Fe–Au and Fe–Au–B–N alloys studied by in situ small-angle neutron scattering

    International Nuclear Information System (INIS)

    Zhang, S.; Kohlbrecher, J.; Tichelaar, F.D.; Langelaan, G.; Brück, E.; Zwaag, S. van der; Dijk, N.H. van

    2013-01-01

    Nanoscale Au precipitation in high-purity Fe–Au and Fe–Au–B–N alloys has been studied by in situ small-angle neutron scattering during isothermal aging at 550 °C and complementary ex situ transmission electron microscopy. The high temperature precipitation behavior in samples having received different degrees of cold deformation has been studied to explore the potential self-healing of deformation-induced defects by Au precipitation. It is found that dislocations induced by prior plastic deformation strongly facilitate the formation of Au precipitates, as no significant precipitation is observed for undeformed samples. Defect-induced Au precipitates are formed both at dislocations and along grain boundaries where the defect density is high. The fact that the Au atoms only precipitate on deformation-induced defects demonstrates that solute gold atoms act as efficient self-healing agents in the ferrous matrix. The addition of B and N is found to retard the Au precipitation

  1. Impacts agricoles des sequences seches au cours de la grande ...

    African Journals Online (AJOL)

    La variabilité pluviométrique de ces trois dernières décennies au Bénin est marquée par une diminution du nombre de jours de pluie. Cette diminution entraîne des séquences sèches au coeur de la grande saison pluviométrique et par conséquent influe sur la production agricole de la commune d'Adjohoun. La présente ...

  2. Indigo équitable au Salvador | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    17 janv. 2011 ... Santos Inocente Conce, 48 ans, est originaire de Los Conce. ... la communauté de San Lucas, située à une heure de route au nord-ouest de la capitale du Salvador, qui, au mois d'août dernier, ont procédé à leur première récolte de feuilles d'indigotier effectuée selon des procédés équitables et durables.

  3. Plasmon-polariton modes of dense Au nanowire arrays

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Hongdan; Lemmens, Peter; Wulferding, Dirk; Cetin, Mehmet Fatih [IPKM, TU-BS, Braunschweig (Germany); Tornow, Sabine; Zwicknagl, Gertrud [IMP, TU-BS, Braunschweig (Germany); Krieg, Ulrich; Pfnuer, Herbert [IFP, LU Hannover (Germany); Daum, Winfried; Lilienkamp, Gerhard [IEPT, TU Clausthal (Germany); Schilling, Meinhard [EMG, TU-BS, Braunschweig (Germany)

    2011-07-01

    Using optical absorption and other techniques we study plasmon-polariton modes of dense Au nanowire arrays as function of geometrical parameters and coupling to molecular degrees of freedom. For this instance we electrochemically deposit Au nanowires in porous alumina with well controlled morphology and defect concentration. Transverse and longitudinal modes are observed in the absorption spectra resulting from the anisotropic plasmonic structure. The longitudinal mode shows a blue shift of energy with increasing length of the wires due to the more collective nature of this response. We compare our observations with model calculations and corresponding results on 2D Ag nanowire lattices.

  4. Alignment following Au L$_{3}$ photoionization by synchrotron radiation

    CERN Document Server

    Yamaoka, H; Takahiro, K; Morikawa, T; Ito, S; Mizumaki, M; Semenov, S; Cherepkov, N; Kabachnik, N M; Mukoyama, T; 10.1088/0953-4075/36/19/001

    2003-01-01

    The alignment of Au/sup +/ ions following L/sub 3/ photoionization has been studied using a high-resolution X-ray spectrometer. We observed a small anisotropy for the angular dependence of Au L/sub l/ and L alpha emissions. The alignment parameter A/sub 20/ derived from the experimental results is compared with theoretical calculations by Hartree-Fock approximation and random phase approximation with exchange. The contribution to the alignment of quadruple interaction is discussed. (40 refs).

  5. NEUROMARKETING ET NEUROSCIENCES AU SERVICE DES PUBLICITAIRES : QUESTIONNEMENTS ETHIQUES

    OpenAIRE

    Courbet, Didier

    2010-01-01

    Le neuromarketing et les neurosciences au service des publicitaires soulèvent immanquablement des questions éthiques relatives aux finalités de cette nouvelle discipline mais également aux moyens utilisés. L'objectif de ce papier est donc de discuter certaines de ces questions. La première partie s'intéressera aux principaux débats éthiques entre les personnes adeptes du neuromarketing (les "pro-neuromarketing") et les "anti-neuromarketing". La deuxième partie expliquera qu'au stade actuel de...

  6. Politique commerciale et croissance favorable aux pauvres au Ghana

    International Development Research Centre (IDRC) Digital Library (Canada)

    Un débat d'experts organisé par le CRDI s'attaque au mariage précoce lors du forum sur la condition des femmes à l'ONU. Des chercheurs appuyés par le CRDI parlent de leurs expériences au Comité sur les ONG lors du forum de la Commission de la condition de la femme. Voir davantageUn débat d'experts organisé par ...

  7. Les plantations d' Eucalyptus au Sahel: distribution, importance ...

    African Journals Online (AJOL)

    Grâce à leur plasticité et leur rusticité, les espèces du genre Eucalyptus sont parmi les essences forestières les plus utilisées pour le reboisement en vue de lutter contre la désertification au Sahel. Toutefois, l'expansion rapide de ces espèces originaires d'Australie dans le Sahel, est surtout liée au succès économique de ...

  8. Pratiques manageriales et stress au travail chez les salaries ...

    African Journals Online (AJOL)

    Les données collectées sont traitées au moyen du t de Student. Les résultats font apparaître que les communications strictement formelles supérieur - salariés sont plus porteuses de stress que celles doublées d'affinité. Par ailleurs, le management centré sur les résultats de l'entreprise contribue plus au développement du ...

  9. Surveillance des manifestations adverses post immunisation au Togo

    African Journals Online (AJOL)

    Les données ont été recueillies à l'aide de trois types de questionnaires adressés respectivement aux mères d'enfants âgés de 0 à 11 mois, au chargé de la surveillance épidémiologique et du Programme élargi de = vaccination (PEV), et aux agents vaccinateurs du centre médico-social d'Agoè-Nyivé. Résultats: Au cours ...

  10. Relance de l'aquaculture au Sri Lanka | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    29 avr. 2016 ... Aquaculture au Sri Lanka. L'adoption de l'ostréiculture dans deux collectivités côtières du Sri Lanka a donné lieu aux premières exportations d'huîtres du pays. Au Sri Lanka, le gouvernement a pour objectif de doubler la consommation de poisson par personne, de 11 kilos à 22 kilos par année, d'ici à la fin ...

  11. Dialogue avec les groupes islamistes au Moyen-Orient | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    De plus, les gouvernements européens et nord-américains ont tendance à considérer l'Islam politique comme un phénomène uniformément négatif bien que l'idéologie de certains groupes ait considérablement évolué au cours des dernières décennies. Par exemple, les groupes islamistes en Égypte, en Jordanie, au ...

  12. Dialogue avec les groupes islamistes au Moyen-Orient | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    De plus, les gouvernements européens et nord-américains ont tendance à considérer l'Islam politique comme un phénomène uniformément négatif bien que l'idéologie de certains groupes ait considérablement évolué au cours des dernières décennies. Par exemple, les groupes islamistes en Égypte, en Jordanie, au ...

  13. Rapport annuel au Parlement Loi sur la protection des ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Larocque, Samia

    31 mars 2017 ... ... plainte au sujet de l'administration de la Loi pendant la période visée, aucune enquête n'a été nécessaire. 8. ÉVALUATION DES FACTEURS RELATIFS À LA. VIE PRIVÉE. Le CRDI n'a pas procédé à des év luations des facteurs relatifs à la vie privée au cours de la période visée pa le présent rapport. 4 ...

  14. Light nuclei production in relativistic Au+nucleus collisions

    Energy Technology Data Exchange (ETDEWEB)

    Bennett, M. J. [Yale Univ., A.W. Wright Nuclear Structure Laboratory, New Haven, CT (United States); Pope, J. K. [Yale Univ., A.W. Wright Nuclear Structure Laboratory, New Haven, CT (United States); Beavis, D. [Brookhaven National Lab. (BNL), Upton, NY (United States); Carroll, J. B. [Univ. of California, Los Angeles, CA (United States); Chiba, J. [KEK, Tsukuba (Japan); Chikanian, A. [Yale Univ., A.W. Wright Nuclear Structure Laboratory, New Haven, CT (United States); Crawford, H. J. [Univ. of California, Space Sciences Laboratory, Berkeley, CA (United States); Cronqvist, M. [Univ. of California, Space Sciences Laboratory, Berkeley, CA (United States); Dardenne, Y. [Univ. of California, Space Sciences Laboratory, Berkeley, CA (United States); Kumar, B. S. [Yale Univ., A.W. Wright Nuclear Structure Laboratory, New Haven, CT (United States); Nagle, J. L. [Yale University, A.W. Wright Nuclear Structure Laboratory, New Haven, CT (United States); Debbe, R. [Brookhaven National Lab. (BNL), Upton, NY (United States); Doke, T. [Waseda Univ., Science and Engineering Research Institute, Waseda (Japan); Engelage, J. [Univ. of California, Space Sciences Laboratory, Berkeley, CA (United States); Greiner, L. [Univ. of California, Space Sciences Laboratory, Berkeley, CA (United States); Hayano, R S [University of Tokyo, Tokyo (Japan); Hallman, Timothy J. [Univ. of California, Los Angeles, CA (United States); Heckman, H. H. [E.O. Lawrence Berkeley National Laboratory, Berkeley, CA (United States); Kashiwagi, T. [Waseda Univ., Science and Engineering Research Institute, Waseda (Japan); Kikuchi, J. [Waseda Univ., Science and Engineering Research Institute, Waseda (Japan); Tanaka, K. H. [KEK, Tsukuba (Japan); Kumar, B. S. [Yale Univ., A.W. Wright Nuclear Structure Laboratory, New Haven, CT (United States); Kuo, C. [Univ. of California, Space Sciences Laboratory, Berkeley, CA (United States); Lindstrom, P. J. [E.O. Lawrence Berkeley National Laboratory, Berkeley, CA (United States); Mitchell, J. W. [USRA/Goddard Space Flight Center, Greenbelt, Maryland (United States); Nagamiya, S. [Columbia Univ., Nevis Laboratory, Irvington, NY (United States); Nagle, J. L. [Yale Univ., A.W. Wright Nuclear Structure Laboratory, New Haven, CT (United States); Stankus, P. [Columbia Univ., Nevis Laboratory, Irvington, NY (United States); Tanaka, K. H. [KEK, Tsukuba (Japan); Welsh, R. C. [Johns Hopkins University, Baltimore, MD (United States); Zhan, W. [Columbia Univ., Nevis Laboratory, Irvington, NY (United States)

    1998-08-01

    We have measured the yields of protons and A=2-4 nuclei in collisions between 10.8 A GeV/ c Au beams and targets of Al, Cu, and Au. The data, which cover a broad rapidity range at low transverse momenta, were measured as a function of collision centrality using a focusing beam line spectrometer and a high-rate centrality detector. We investigate the dependence of coalescence parameters on event geometry. The data are compared with the predictions of an RQMD+coalescence model. {copyright} {ital 1998} {ital The American Physical Society}

  15. Catalytically favorable surface patterns in Pt-Au nanoclusters

    KAUST Repository

    Mokkath, Junais Habeeb

    2013-01-01

    Motivated by recent experimental demonstrations of novel PtAu nanoparticles with highly enhanced catalytic properties, we present a systematic theoretical study that explores principal catalytic indicators as a function of the particle size and composition. We find that Pt electronic states in the vicinity of the Fermi level combined with a modified electron distribution in the nanoparticle due to Pt-to-Au charge transfer are the origin of the outstanding catalytic properties. From our model we deduce the catalytically favorable surface patterns that induce ensemble and ligand effects. © The Royal Society of Chemistry 2013.

  16. X-raying the AU Microscopii debris disk

    OpenAIRE

    Schneider, P. C.; Schmitt, J. H. M. M.

    2010-01-01

    AU Mic is a young, nearby X-ray active M-dwarf with an edge-on debris disk. Debris disk are the successors of the gaseous disks usually surrounding pre-main sequence stars which form after the first few Myrs of their host stars' lifetime, when - presumably - also the planet formation takes place. Since X-ray transmission spectroscopy is sensitive to the chemical composition of the absorber, features in the stellar spectrum of AU Mic caused by its debris disk can in principle be detected. The ...

  17. Tuning the chemical activity through PtAu nanoalloying: a first principles study

    KAUST Repository

    Mokkath, Junais Habeeb

    2013-06-21

    The electronic structure and adsorption properties of 1.5 nm sized Pt, Au, and PtAu nanoclusters are studied by density functional theory. We explain the recent experimental finding that 20% Au content in PtAu nanoparticles is optimal to induce a dramatically different catalytic behavior. Our results show that the d-band center together with the density of states at the Fermi energy can be used as an indicator of the chemical activity of PtAu nanoclusters. The most favorable adsorption sites on the cluster surfaces as a function of the Pt/Au ratio are identified using atomic H as a probe.

  18. The coupled geochemistry of Au and As in pyrite from hydrothermal ore deposits

    Science.gov (United States)

    Deditius, Artur P.; Reich, Martin; Kesler, Stephen E.; Utsunomiya, Satoshi; Chryssoulis, Stephen L.; Walshe, John; Ewing, Rodney C.

    2014-09-01

    The ubiquity of Au-bearing arsenian pyrite in hydrothermal ore deposits suggests that the coupled geochemical behaviour of Au and As in this sulfide occurs under a wide range of physico-chemical conditions. Despite significant advances in the last 20 years, fundamental factors controlling Au and As ratios in pyrite from ore deposits remain poorly known. Here we explore these constraints using new and previously published EMPA, LA-ICP-MS, SIMS, and μ-PIXE analyses of As and Au in pyrite from Carlin-type Au, epithermal Au, porphyry Cu, Cu-Au, and orogenic Au deposits, volcanogenic massive sulfide (VHMS), Witwatersrand Au, iron oxide copper gold (IOCG), and coal deposits. Pyrite included in the data compilation formed under temperatures from ∼30 to ∼600 °C and in a wide variety of geological environments. The pyrite Au-As data form a wedge-shaped zone in compositional space, and the fact that most data points plot below the solid solubility limit defined by Reich et al. (2005) indicate that Au1+ is the dominant form of Au in arsenian pyrite and that Au-bearing ore fluids that deposit this sulfide are mostly undersaturated with respect to native Au. The analytical data also show that the solid solubility limit of Au in arsenian pyrite defined by an Au/As ratio of 0.02 is independent of the geochemical environment of pyrite formation and rather depends on the crystal-chemical properties of pyrite and post-depositional alteration. Compilation of Au-As concentrations and formation temperatures for pyrite indicates that Au and As solubility in pyrite is retrograde; Au and As contents decrease as a function of increasing temperature from ∼200 to ∼500 °C. Based on these results, two major Au-As trends for Au-bearing arsenian pyrite from ore deposits are defined. One trend is formed by pyrites from Carlin-type and orogenic Au deposits where compositions are largely controlled by fluid-rock interactions and/or can be highly perturbed by changes in temperature and

  19. Synthesis and enhanced humidity detection response of nanoscale Au-particle-decorated ZnS spheres

    OpenAIRE

    Liang, Yuan-Chang; Liu, Shang-Luen

    2014-01-01

    We successfully prepared Au-nanoparticle-decorated ZnS (ZnS-Au) spheres by sputtering Au ultrathin films on surfaces of hydrothermally synthesized ZnS spheres and subsequently postannealed the samples in a high-vacuum atmosphere. The Au nanoparticles were distributed on ZnS surfaces without substantial aggregation. The Au nanoparticle diameter range was 5 to 10 nm. Structural information showed that the surface of the annealed ZnS-Au spheres became more irregular and rough. A humidity sensor ...

  20. Expedient Syntheses of Neutral and Cationic Au(I)–NHC Complexes

    KAUST Repository

    Veenboer, Richard M. P.

    2017-09-08

    The synthesis and isolation of gold(I) precatalysts often requires the generation of several isolable intermediates as well as numerous purification steps. New protocols for the expedient synthesis of neutral [Au(OH)(NHC)] and [Au(CH2COCH3)(NHC)] species from [AuCl(NHC)] or [AuCl(DMS)] precursors bearing a variety of N-heterocyclic carbene (NHC) ligands are presented. These methods can be employed in a telescoping manner for the synthesis of catalytically relevant [Au(NTf2)(NHC)] and [Au(NHC)(NCCH3)][BF4] complexes. These attractive methods are straightforward and practical leading to various complexes in high isolated yields and purity.

  1. Theoretical study of CO oxidation on cationic, neutral, and anionic AuM dimers (M = Pd and Ag).

    Science.gov (United States)

    Chen, Xuan; Lu, Rui-Feng; Kan, Er-Jun; Liu, Yu-Zhen; Xiao, Chuan-Yun; Deng, Kai-Ming

    2014-06-01

    The CO and O2 adsorption as well as CO oxidation on cationic, neutral, and anionic AuM dimers (M = Pd, Ag) are studied by density functional calculations. Our results show that CO and O2 are adsorbed more stably on AuPd dimers than on AuAg dimers with corresponding charge state. O2 is favorable to be adsorbed on Pd atom in AuPd(+), AuPd and AuPd(-) dimers. CO is adsorbed on Pd in AuPd and AuPd(-), while it is favorable to be adsorbed on Au in AuPd(+). For AuAg dimers, O2 is adsorbed on Ag in AuAg and AuAg(-), and it is adsorbed on Au in AuAg(+). CO is adsorbed on Ag in AuPd(-), while it is adsorbed on Au in AuAg and AuAg(+). The CO oxidation reaction is explored along two possible pathways: path-1 involves CO attacking the initial complexes of AuM dimers and O2, and path-2 is related to O2 interacting with the complexes of AuM dimers and CO. The charge state of AuM dimers has a substantial effect on CO oxidation. The reaction on AuPd(-) prefers path-1, and AuPd(+) mediated reaction proceeds along path-2, while CO oxidation on AuPd is difficult along both paths. For AuAg, both pathways are viable for AuAg(-) mediated reactions, while AuAg and AuAg(+) mediated reactions prefer path-2. Moreover, the energy barriers of CO oxidation on neutral AuAg is comparable with those on AuPd in all charge states while the energy barriers for AuAg(-) and AuAg(+) are considerably lower than those for all AuPd dimmers, indicating the impurity atom also plays a significant role in the catalytic activity. Furthermore, AuAg(-) is proposed to be the most active species due to the lowest barrier involved in the reaction.

  2. Site-specific growth of Au-Pd alloy horns on Au nanorods: A platform for highly sensitive monitoring of catalytic reactions by surface enhancement raman spectroscopy

    KAUST Repository

    Huang, Jianfeng

    2013-06-12

    Surface-enhanced Raman scattering (SERS) is a highly sensitive probe for molecular detection. The aim of this study was to develop an efficient platform for investigating the kinetics of catalytic reactions with SERS. To achieve this, we synthesized a novel Au-Pd bimetallic nanostructure (HIF-AuNR@AuPd) through site-specific epitaxial growth of Au-Pd alloy horns as catalytic sites at the ends of Au nanorods. Using high-resolution electron microscopy and tomography, we successfully reconstructed the complex three-dimensional morphology of HIF-AuNR@AuPd and identified that the horns are bound with high-index {11l} (0.25 < l < 0.43) facets. With an electron beam probe, we visualized the distribution of surface plasmon over the HIF-AuNR@AuPd nanorods, finding that strong longitudinal surface plasmon resonance concentrated at the rod ends. This unique crystal morphology led to the coupling of high catalytic activity with a strong SERS effect at the rod ends, making HIF-AuNR@AuPd an excellent bifunctional platform for in situ monitoring of surface catalytic reactions. Using the hydrogenation of 4-nitrothiophenol as a model reaction, we demonstrated that its first-order reaction kinetics could be accurately determined from this platform. Moreover, we clearly identified the superior catalytic activity of the rod ends relative to that of the rod bodies, owing to the different SERS activities at the two positions. In comparison with other reported Au-Pd bimetallic nanostructures, HIF-AuNR@AuPd offered both higher catalytic activity and greater detection sensitivity. © 2013 American Chemical Society.

  3. Gold chloride clusters with Au(III) and Au(I) probed by FT-ICR mass spectrometry and MP2 theory.

    Science.gov (United States)

    Lemke, Kono H

    2014-05-07

    Microsolvated clusters of gold chloride are probed by electrospray ionization mass spectrometry (ESI-MS) and scalar relativistic electronic structure calculations. Electrospray ionization of aqueous AuCl3 leads to mononuclear clusters of types [AuCl2](+)(H2O)n (n = 0-4), [AuOHCl](+)(H2O)n (n = 0-1) and [AuCl2](+)(HCl)2(H2O)n (n = 0-4). In addition, strong ion signals due to dinuclear [Au2Cl5-xOHx](+)(H2O)n (x = 0-1) are present in ESI mass spectra of aqueous AuCl3, with the abundance of individual dinuclear species controlled by the concentration-dependent variation of the precursor complexes [AuCl2-xOHx](+)(H2O)n and AuCl3. Equilibrium structures, energies and thermodynamic properties of mono- and dinuclear gold clusters have been predicted using MP2 and CCSD(T) theory, and these data have been applied to examine the influence of microsolvation on cluster stability. Specifically, results from CCSD(T) calculations indicate that non-covalently bound ion-neutral complexes Au(+)(Cl2)(H2O)n, with formal Au(I), are the dominant forms of mononuclear gold with n = 0-2, while higher hydrates (n > 2) are covalently bound [AuCl2](+)(H2O)n complexes in which gold exists as Au(III). MP2 calculations show that the lowest energy structure of dinuclear gold is an ion-molecule cluster [Au2Cl(Cl2)2](+) consisting of a single-bridged digold-chloronium ion bound end-on to two dichlorine ligands, with two higher energy isomers, single-bridged [Au2Cl3(Cl2)](+) and double-bridged [Au2Cl5](+) clusters. Finally, AuAu interactions in the singly-bridged clusters [Au2Cl(Cl2)2](+)(H2O)n and [Au2Cl3(Cl2)](+)(H2O)n are examined employing a wide range of computational tools, including natural bond order (NBO) analysis and localized orbital locator (LOL) profiles.

  4. Anisotropic In Situ-Coated AuNPs on Screen-Printed Carbon Surface for Enhanced Prostate-Specific Antigen Impedimetric Aptasensor

    Science.gov (United States)

    Do, Tram T. N.; Van Phi, Toan; Nguy, Tin Phan; Wagner, Patrick; Eersels, Kasper; Vestergaard, Mun'delanji C.; Truong, Lien T. N.

    2017-06-01

    An impedimetric aptasensor has been used to study the effect of charge transfer on the binding of prostate-specific antigen (PSA) to its aptamer. Full understanding of this mechanism will be beneficial to further improve its sensitivity for PSA detection in human semen at physiologically relevant concentrations. Bare gold electrodes (SPAuEs) and gold nanoparticles (AuNPs)-coated screen-printed carbon ink electrodes (AuNPs/SPCEs) were coated with aptamer solution at various concentrations and the sensor response to increasing PSA concentration in buffer solution examined. AuNPs were deposited onto carbon electrodes in 10 cycles. AuNPs/SPCEs were then coated with a self-assembled monolayer (SAM) of 16-mercaptohexadecanoic acid prior to aptamer immobilization at dose of 5 μg mL-1. The results indicate that anisotropic AuNPs/SPCEs outperform bare gold electrodes in terms of decreased amount of aptamer bunches as well as the number of intermediate PSA-aptamer complexes formed on the electrode surface. The key finding is that the fabricated aptasensor is sensitive enough [limit of detection (LoD) 1.95 ng mL-1] for early diagnosis of prostate cancer and displays linear response in the physiologically relevant concentration range (0 ng mL-1 to 10 ng mL-1), as shown by the calibration curve of the relative change in electron transfer resistance (Δ R CT) versus PSA concentration when aptamer/SAM/AuNPs/SPCEs were exposed to buffer containing PSA at different concentrations.

  5. DNA-AuNP networks on cell membranes as a protective barrier to inhibit viral attachment, entry and budding.

    Science.gov (United States)

    Li, Chun Mei; Zheng, Lin Ling; Yang, Xiao Xi; Wan, Xiao Yan; Wu, Wen Bi; Zhen, Shu Jun; Li, Yuan Fang; Luo, Ling Fei; Huang, Cheng Zhi

    2016-01-01

    Viral infections have caused numerous diseases and deaths worldwide. Due to the emergence of new viruses and frequent virus variation, conventional antiviral strategies that directly target viral or cellular proteins are limited because of the specificity, drug resistance and rapid clearance from the human body. Therefore, developing safe and potent antiviral agents with activity against viral infection at multiple points in the viral life cycle remains a major challenge. In this report, we propose a new modality to inhibit viral infection by fabricating DNA conjugated gold nanoparticle (DNA-AuNP) networks on cell membranes as a protective barrier. The DNA-AuNPs networks were found, via a plaque formation assay and viral titers, to have potent antiviral ability and protect host cells from human respiratory syncytial virus (RSV). Confocal immunofluorescence image analysis showed 80 ± 3.8% of viral attachment, 91.1 ± 0.9% of viral entry and 87.9 ± 2.8% of viral budding were inhibited by the DNA-AuNP networks, which were further confirmed by real-time fluorescence imaging of the RSV infection process. The antiviral activity of the networks may be attributed to steric effects, the disruption of membrane glycoproteins and limited fusion of cell membrane bilayers, all of which play important roles in viral infection. Therefore, our results suggest that the DNA-AuNP networks have not only prophylactic effects to inhibit virus attachment and entry, but also therapeutic effects to inhibit viral budding and cell-to-cell spread. More importantly, this proof-of-principle study provides a pathway for the development of a universal, broad-spectrum antiviral therapy. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Low frequency noise in the unstable contact region of Au-to-Au microcontact for microelectromechanical system switches

    International Nuclear Information System (INIS)

    Qiu, Haodong; Wang, Hong; Ke, Feixiang

    2014-01-01

    The noise behavior of Au-to-Au microcontact for microelectromechanical system switches has been experimentally studied in the unstable contact region. The results suggest that the electrical conduction remains nonmetallic at the initial stage during contact formation due to the existence of alien films, and traps in the alien layer located at the contact interface could play an important role in determining the conduction noise. The conduction fluctuation induced by electron trapping-detrapping associated with the hydrocarbon layer is found to be an intrinsic noise source contributing to the low frequency noise in the unstable contact region.

  7. Multidimensional analysis of collective sidewards flow in Au on Au reactions between 100 and 1050 A MeV

    International Nuclear Information System (INIS)

    Wienold, T.; Fan, Z.G.; Hartnack, C.

    1994-11-01

    An excitation function of the Au on Au reaction from 100 to 1050 A MeV was measured using the FOPI-facility at GSI Darmstadt. Nuclear charge (Z≤15) and velocity of the product were detected with full azimuthal acceptance at laboratory angles 1 ≤Θ lab ≤30 . For the first time an analysis is presented which combines the azimuthally asymmetric part of the transverse flow (sidewards flow), stopping and the associated collision geometry. In comparison to microscopic transport model calculations we demonstrate the relevance of this method for the extraction of the nuclear equation of state. (orig.)

  8. Antiproton production in Au + Au collisions at 11.7 A{center_dot}GeV/c

    Energy Technology Data Exchange (ETDEWEB)

    Sako, Hiroyuki [Tokyo Univ. (Japan)

    1997-02-01

    We investigated the dependence of antiproton yields on the number of wounded projectile nucleons (N{sub proj}). The dN/dy/N{sub proj} of antiprotons with the beam energy correction is almost constant from p+A to Si+A collisions, while it decreases in Au+Au collisions to 30-60% of the constant. Next, we have compared dependence of ratios of dN/dy, p-bar/{pi}{sup -}, p/{pi}{sup -}, K{sup -}/{pi}{sup -}, K{sup +}/{pi}{sup -}, and {pi}{sup +}/{pi}{sup -} at 1.2Au+Au collisions. Only the ratio of p-bar/{pi}{sup -} decreases rapidly, while the ratios of p/{pi}{sup -}, K{sup +}/{pi}{sup -}, and K{sup -}/{pi}{sup -} increase, and {pi}{sup +}/{pi}{sup -} stays constant. These observations suggest that in the AGS energy regime, the absorption effect of antiprotons in Au+Au collisions is much stronger than in p+A and Si+A collisions. We have compared the antiproton data with the RQMD model. In RQMD, antiprotons are produced initially from multi-step excitation processes and some of them are absorbed by nucleons with free NN-bar annihilation cross sections. RQMD reproduces overall tendencies of antiproton yields from p+A to Au+Au collisions within 50%. Finally, we explored the relation between baryon densities and antiproton yields in A+A collisions. We used a model in a static participant volume with the RQMD initial production and the absorption length with the free NN-bar annihilation cross section. In the model, only the antiprotons produced around the surface of the participant volume can survive. The model reproduces the scaling of experimental antiproton yields with the 2/3 power of the number of participants. By comparing the model with the experimental data, it is found that the ratio of the mean baryon density to the surface baryon density is 3-4 independent of collision systems. (J.P.N.). 109 refs.

  9. Impedance analysis of oxygen reduction in Au nanoparticles; Analisis por impedancia de la reduccion de oxigeno sobre nanoparticulas de Au

    Energy Technology Data Exchange (ETDEWEB)

    Vazquez-Huerta, G.; Ramos-Sanchez, G. [Cinvestav-IPN, Mexico, D.F. (Mexico)]. E-mail: gervazkez@gmail.com; Antano-Lopez, R. [Centro de Investigacion y Desarrollo Tecnologico en Electroquimica S. C., Pedro Escobedo, Queretaro (Mexico); Solorza-Feria, O. [Cinvestav-IPN, Mexico, D.F. (Mexico)

    2009-09-15

    Nanometric-sized ({approx}5nm) Au particles were synthesized using the chemical reduction of AuCl{sub 3} with NaBH{sub 4}. The Au particles were analyzed with x-ray diffraction (XRD), finding that the particles are highly crystalline, with a face-centered cubic (FCC) structure. The impedance spectrums obtained in 0.5M H{sub 2}SO{sub 4} solution saturated with O{sub 2}, at potentials greater than 0.38 V vs NHE, show one single temperature constant associated with the reduction in O{sub 2} on Au particles, producing hydrogen peroxide (O{sub 2} +2H{sup +} + 2e{sup -} =H{sub 2}O{sub 2}). At potentials less than 0.38 V, a second constant temperature appears associated with a second process, that is, the reduction of H{sub 2}O{sub 2} to H{sub 2}O. [Spanish] Particulas de Au con tamano nanometrico ({approx}5nm) fueron sintetizadas a partir de la reduccion quimica del AuCl{sub 3} con NaBH{sub 4}. Las particulas de Au fueron analizadas con difraccion de rayos X (XRD), se encontro que las particulas son altamente cristalinas, con una estructura cubica centrada en las caras (FCC). Los espectros de impedancia obtenidos en solucion 0.5M H{sub 2}SO{sub 4} saturada con O{sub 2}, a potenciales mayores de 0.38 V vs NHE muestran una sola constante de tiempo, asociada a la reduccion de O{sub 2} sobre las particulas de Au, dando como producto peroxido de hidrogeno (O{sub 2} +2H{sup +} + 2e{sup -} =H{sub 2}O{sub 2}). A potenciales menores de 0.38 V aparece una segunda constante de tiempo, asociada a un segundo proceso, i.e. la reduccion del H{sub 2}O{sub 2} a H{sub 2}O.

  10. Azimuthal anisotropy of charged and identified high pT hadrons in Au+Au collisions at RHIC

    International Nuclear Information System (INIS)

    Filimonov, K.; STAR Collaboration; STAR-RICH Collaboration

    2002-01-01

    We report new results on v 2 (p T ) for Au+Au collisions at √(S NN ) = 200 GeV for charged hadrons, pions, kaons,(anti)protons, K s 0 , and Lambda. The analysis is extended to p T = 12 GeV/c for charged hadrons and p T = 4 GeV/c for identified particles. A comparison of the azimuthal anisotropy of charged hadrons measured at sqrt √(s NN ) 130 and 200 GeV is presented. The p T -dependence of baryon versus meson elliptic flow is discussed

  11. V0 Reconstruction of Strange Hadrons in Au+Au Collisions at 1.23 AGeV with HADES

    International Nuclear Information System (INIS)

    Scheib, T

    2015-01-01

    Preliminary results on the production of weakly decaying strange hadrons are reported for collisions of Au+Au at 1.23 AGeV beam energy studied with the HADES detector at GSI in Darmstadt. At this collision energy all strange particles are created below their elementary threshold. The reconstruction of the investigated particles (i.e. Λ and K 0 s ) via the topology of their charged decay products (V 0 reconstruction) is presented in detail. From the corrected yields of Λ and K 0 s the ratio K 0 S /Λ can be calculated and included into a statistical model fit. (paper)

  12. Longitudinal and transverse flows of protons in 2-8 AxGeV Au-Au collisions

    International Nuclear Information System (INIS)

    Liu, F.H.

    2003-01-01

    Longitudinal and transverse flows extracted from the rapidity and azimuthal distributions of protons produced in Au-Au collisions in the energy range from 2 to 8 AxGeV at the Brookhaven Alternating-Gradient Synchrotron (AGS) are investigated by a simple model. The elliptic and directed flow characteristics extracted from the azimuthal distribution at the AGS energies are described by a simple formula. The Monte Carlo calculated results are compared and found to be in agreement with the experimental data of the E895 Collaboration. (author)

  13. Search for new metastable particles produced in Au+Au collisions at 10.8AGeV/c

    Energy Technology Data Exchange (ETDEWEB)

    Beavis, D. [Brookhaven National Lab. (BNL), Upton, NY (United States); Bennett, M. J. [Yale Univ., A.W. Wright Nuclear Structure Laboratory, New Haven, CT (United States); Carroll, J. B. [Univ. of California, Los Angeles, CA (United States); Chiba, J. [KEK, Tsukuba (Japan); Chikanian, A. [Yale Univ., A.W. Wright Nuclear Structure Laboratory, New Haven, CT (United States); Crawford, H. [Univ. of California Space Science Laboratory, Berkeley, CA (United States); Cronqvist, M. [Univ. of California Space Science Laboratory, Berkeley, CA (United States); Dardenne, Y. [Univ. of California Space Science Laboratory, Berkeley, CA (United States); Debbe, R. [Brookhaven National Lab. (BNL), Upton, NY (United States); Doke, T. [Waseda Univ., Shinjuku (Japan); Engelage, J. [Univ. of California Space Science Laboratory, Berkeley, CA (United States); Greiner, L. [Univ. of California Space Science Laboratory, Berkeley, CA (United States); Hallman, Timothy J. [Univ. of California, Los Angeles, CA (United States); Hayano, R. S. [Univ. of Tokyo (Japan); Heckman, H. H. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Kashiwagi, T. [Waseda Univ., Shinjuku (Japan); Kikuchi, J. [Waseda Univ., Shinjuku (Japan); Kumar, S. [Yale Univ., A.W. Wright Nuclear Structure Laboratory, New Haven, CT (United States); Kuo, C. [Univ. of California Space Science Laboratory, Berkeley, CA (United States); Lindstrom, P. J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Mitchell, J. W. [University Space Research Association/ GSFC, Greenbelt, MD (United States); Nagamiya, S. [Columbia Univ., Nevis Laboratory, Irvington, NY (United States); Nagle, J. L. [Yale Univ., A.W. Wright Nuclear Structure Laboratory, New Haven, CT (United States); Pope, J. K. [Yale Univ., A.W. Wright Nuclear Structure Laboratory, New Haven, CT (United States); Stankus, P. [Columbia Univ., Nevis Laboratory, Irvington, NY (United States); Tanaka, K. H. [KEK, Tsukuba (Japan); Welsh, R. C. [Johns Hopkins Univ., Baltimore, MD (United States); Zhan, W. [Brookhaven National Laboratory, Upton, New York (United States)

    1995-10-01

    We have investigated particle production using a zero degree two-segment focusing beam-line spectrometer, examining 2 x 10¹² Au+Au interactions at a beam momentum of 10.8AGeV/c. We have measured invariant cross sections for protons, various light nuclei (through {ital A}=6), antiprotons, and have set upper limits on the production of heavier nuclei, antideuterons, and strangelets. There is no evidence, within the sensitivity of our measurements, for the formation of new particles having lifetimes >100 ns. copyright 1995 The American Physical Society.

  14. Minimization of contact resistance between metal and polymer by surface doping

    International Nuclear Information System (INIS)

    Mukherjee, A K; Thakur, A K; Takashima, W; Kaneto, K

    2007-01-01

    The technique of surface doping is used to reduce the contact resistance between Au and poly(3-hexylthiophen-2,5-diyl) (P3HT) in Au(bottom)/P3HT/Au(top) sandwich type cells. To implement this technique, dodecyl benzene sulfonic acid (DBSA) is found to be an effective bulky dopant of P3HT as confirmed by four probe conductivity measurements, absorption and photoluminescence spectra. Sandwich cells treated with DBSA showed electrical short due to diffusion of DBSA across the P3HT film in Au(bottom)/DBSA/P3HT/DBSA/Au(top) sandwich cells, which confirms that DBSA is not immobilized at the surface. To restrict DBSA primarily at the surface, an aqueous solution of poly(ethylenedioxy thiophene) stabilized in poly(styrene sulfonic acid) (PEDOT : PSS) is utilized to make an emulsion with DBSA. The application of this emulsion at the top and bottom Au/P3HT interface has resulted in a decrease of contact resistance by nearly four orders of magnitude

  15. Minimization of contact resistance between metal and polymer by surface doping

    Science.gov (United States)

    Mukherjee, A. K.; Thakur, A. K.; Takashima, W.; Kaneto, K.

    2007-03-01

    The technique of surface doping is used to reduce the contact resistance between Au and poly(3-hexylthiophen-2,5-diyl) (P3HT) in Au(bottom)/P3HT/Au(top) sandwich type cells. To implement this technique, dodecyl benzene sulfonic acid (DBSA) is found to be an effective bulky dopant of P3HT as confirmed by four probe conductivity measurements, absorption and photoluminescence spectra. Sandwich cells treated with DBSA showed electrical short due to diffusion of DBSA across the P3HT film in Au(bottom)/DBSA/P3HT/DBSA/Au(top) sandwich cells, which confirms that DBSA is not immobilized at the surface. To restrict DBSA primarily at the surface, an aqueous solution of poly(ethylenedioxy thiophene) stabilized in poly(styrene sulfonic acid) (PEDOT : PSS) is utilized to make an emulsion with DBSA. The application of this emulsion at the top and bottom Au/P3HT interface has resulted in a decrease of contact resistance by nearly four orders of magnitude.

  16. Resident resistance.

    Science.gov (United States)

    Price, J L; Cleary, B

    1999-01-01

    Clearly, faculty must work hard with residents to explore the nature of their resistance to a program's learning and growth opportunities. Initial steps to a deeper, more effective, and longer-lasting change process must be pursued. If resident resistance is mishandled or misunderstood, then learning and professional growth may be sidetracked and the purposes of residency training defeated. Listening to the whole person of the resident and avoiding the trap of getting caught up in merely responding to select resident behaviors that irritate us is critical. Every faculty member in the family practice residency program must recognize resistance as a form of defense that cannot immediately be torn down or taken away. Resident defenses have important purposes to play in stress reduction even if they are not always healthy. Residents, especially interns, use resistance to avoid a deeper and more truthful look at themselves as physicians. A family practice residency program that sees whole persons in their residents and that respects resident defenses will effectively manage the stress and disharmony inherent to the resistant resident.

  17. Tuberculose hépatique nodulaire: complication inhabituelle au ...

    African Journals Online (AJOL)

    -tumorale dont le tableau clinico-biologique et radiologique initial était aspécifique. Il s'agit d'un jeune marocain suivi pour maladie de Wilson et présentant une fièvre au long cours. L'imagerie met en évidence une lésion nodulaire hépatique ...

  18. KISWAHILI AU KIINGEREZA? SIASA NA LUGHA MUAFAKA YA ...

    African Journals Online (AJOL)

    Madhumuni ya makala hii ni kuonyesha kuwa wataalam wenye wajibu wa kushughulikia tatizo la utayari wa Kiswahili katika elimu walishamaliza kazi yao zamani na wakabainisha kuwa, kwa Tanzania, Kiswahili kikitumika mara moja katika mfumo mzima wa elimu badala ya Kiingereza au lugha nyingine, mabadiliko ya ...

  19. Fibres Optiques En Therapie Laser Au Contact Du Tissu

    Science.gov (United States)

    Lenz, P.; Sabben, G.; Lambert, R.; Berger, F.

    1984-03-01

    Les fibres en quartz, non protegees par un courant de gaz et placees au contact du tissu, peuvent etre utilisees pratiquement indefiniment grace a un "autonettoyage" et une "regenera-tion". Elles provoquent des lesions tissulaires semblables a celles obtenues avec les fibres conventionnelles.

  20. Autonomisation des femmes au moyen de lieux de travail humains ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Autonomisation des femmes au moyen de lieux de travail humains : Ateliers de confection en Asie du SudEst. En Asie, les ateliers de confection constituent un secteur d'emplois dominant, néanmoins les conditions dans ces lieux de travail sont parmi les plus rudes dans la région. Dans beaucoup d'ateliers de confection en ...

  1. Consommation des psychotropes en milieu scolaire, au Burkina Faso

    African Journals Online (AJOL)

    Consommation des psychotropes en milieu scolaire, au Burkina Faso : Prévalences et facteurs de risque. L Nikiéma, S Kouanda, I Seck, S Tiendrebéogo, HG Ouédraogo, M Yaméogo, B Méda, B Doulogou, I Guissou, B Sondo ...

  2. Nitrogen mineralization from 'AU Golden' sunn hemp residue

    Science.gov (United States)

    The tropical legume sunn hemp (Crotalaria juncea) cultivar ‘AU Golden’ has the potential to provide substantial amounts of nitrogen (N) to subsequent crops that could reduce recommended application rates of synthetic N fertilizers. Nitrogen fertilization problems via legumes are often due to asynch...

  3. Supporting Table A4 MULLICAN CHARGES (a.u.) and ...

    Indian Academy of Sciences (India)

    Windows User

    1.135621. 64 H. 0.01933. -1.132721. 65 H. -0.259245. -1.126795. Supporting Table A5. MULLICAN CHARGES (a.u.) and ELECTROSTATIC POTENTIAL(a.u.). OF ATOMS OF 1CH4@512-METHANOL. ATOM ID. ATOM TYPE MULLIKAN CHARGES.

  4. ETHANOL OXIDATION OVER AU/TIO2 CATALYSTS

    African Journals Online (AJOL)

    DR. AMINU

    Simultaneously, ethanol oxidation on Au/TiO2 catalyst was followed by dehydration to ethene at 300oC. (characteristic of TiO2) and dehydrogenation to ethanal at high temperature. The pathway which gives ethene as seen on TiO2 remains, but a ...

  5. Au implantation into various types of silicate glasses

    Czech Academy of Sciences Publication Activity Database

    Malinský, Petr; Macková, Anna; Bočan, Jiří; Švecová, B.; Nekvindová, P.

    2009-01-01

    Roč. 267, - (2009), s. 1575-1578 ISSN 0168-583X R&D Projects: GA MŠk(CZ) LC06041 Institutional research plan: CEZ:AV0Z10480505 Keywords : Au+ ion implantation * Glass es * RBS Depth profiling Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 1.156, year: 2009

  6. La topographie au dahomey a la veille des independances ...

    African Journals Online (AJOL)

    La topographie au dahomey a la veille des independances : Organisation et attributions du service de la topographie. ... Exclusively livened up at first by French executives, the topographic Department and the land registry knew in time, the intervention of land surveyors and draftsmen of Dahomey. The proof is that this ...

  7. Les agriculteurs tracent une nouvelle voie au Kenya | CRDI - Centre ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    20 janv. 2014 ... L'équipe est soutenue par le Fonds canadien de recherche sur la sécurité alimentaire internationale (FCRSAI), initiative concertée du CRDI et d'Affaires étrangères, Commerce et Développement Canada. Le FCRSAI supervise 21 projets ... Kenya food security agriculture. Des organismes oeuvrant au ...

  8. Substrate induced ordering of molecular adsorbates on Au(111)

    International Nuclear Information System (INIS)

    Schott, J.H.; White, H.S.; Arana, C.R.

    1992-01-01

    Using scanning tunneling microscopy in dimethylformate, [Ru(bpy) 2 (bpy-(CH 2 ) x -bpy) 2+ ] (x = 4 and 5) monolayers adsorbed on the unreconstructed and √3 x 22 reconstructed surfaces of Au(111) were imaged in this paper. The substrate had a highly ordered pattern on the reconstructed surface, but random spatial distribution on the unreconstructed surface. 17 refs., 3 figs

  9. L'APPRENTISSAGE AU CERN - French version only

    CERN Multimedia

    Roland Gay

    2002-01-01

    APPRENTISSAGES TECHNIQUES FORMATION ET DEVELOPPEMENT HR/TD/AP L'apprentissage au CERN est régi par les lois, règlements et contrats en vigueur dans le Canton de Genève. En cas de réussite à l'examen de fin d'apprentissage, les apprentis obtiennent le Certificat Fédéral de Capacité Suisse (CFC). 7 places au total sont ouvertes au recrutement pour les deux professions. L'apprentissage dure 4 ans. Minima requis pour faire acte de candidature :   avoir terminé la scolarité obligatoire être ressortissant d'un pays membre du CERN (Allemagne, Autriche, Belgique, Bulgarie, Danemark, Espagne, Finlande, France, Grèce, Hongrie, Italie, Norvège, Pays-Bas, Pologne, Portugal, République slovaque, République tchèque, Royaume-Uni, Suède, Suisse) avoir au moins 15 ans et moins de 21 ans à la date de début de ...

  10. Au Cern, premières collisions de protons hier

    CERN Multimedia

    Galeazzi, Juliette

    2009-01-01

    "Hier, les scientifiques du monde entier ont salué le redémarrage du LHC, grand collisionneur de hadrons, au Cern à Genève. Après quatorze mois d'arrêt, à la suite d'une panne, les expériences ont pris et les premières collisions ont eu lieu" (2 pages)

  11. EST Table: AU003957 [KAIKOcDNA[Archive

    Lifescience Database Archive (English)

    Full Text Available AU003957 ws00778 10/09/28 32 %/178 aa ref|NP_001020917.3| reproductive homeobox on ...X chromosome 3 [Rattus norvegicus] gb|AAY58261.1| reproductive homeobox on X chromosome 2 [Rattus norvegicus

  12. Using Dawn to Observe SEP Events Past 2 AU

    Science.gov (United States)

    Villarreal, Michaela; Russell, Christopher T.; Prettyman, Thomas H.

    2017-10-01

    The launch of the STEREO spacecraft provided much insight into the longitudinal and radial distribution of solar energetic particles (SEPs) relative to their origin site. However, almost all of the observations of SEP events have been made exclusively near 1 AU. The Dawn mission, which orbited around Vesta before arriving at Ceres, provides an opportunity to analyze these events at much further distances. Although Dawn's Gamma Ray and Neutron Detector (GRaND) is not optimized for SEP characterization, it is sensitive to protons greater than 4 MeV, making it capable of detecting a solar energetic particle event in its vicinity. Solar energetic particles in this area of the solar system are important as they are believed to cause sputtering at bodies such as Ceres and comets (Villarreal et al., 2017; Wurz et al., 2015). In this study, we use Dawn’s GRaND data from 2011-2015 when Dawn was at distances between 2-3 AU. We compare the SEP events seen by Dawn with particle measurements at 1 AU using STEREO, Wind, and ACE to understand how the SEP events evolved past 1 AU.References: Villarreal, M. N., et al. (2017), The dependence of the Cerean exosphere on solar energetic particle events, Astrophys. J. Lett., 838, L8.Wurz, P. et al. (2015), Solar wind sputtering of dust on the surface of 67P/Churyumov-Gerasimenko, A&A, 583, A22.

  13. Density functional theory investigation of benzenethiol adsorption on Au(111)

    DEFF Research Database (Denmark)

    Nara, Jun; Higai, Shin’ichi; Morikawa, Yoshitada

    2004-01-01

    We have studied the adsorption of benzenethiol molecules on the Au(111) surface by using first principles total energy calculations. A single thiolate molecule is adsorbed at the bridge site slightly shifted toward the fcc-hollow site, and is tilted by 61degrees from the surface normal. As for th...

  14. Connecter l'Afrique, du Cap au Caire

    International Development Research Centre (IDRC) Digital Library (Canada)

    Cathy Egan

    aux gouvernements désireux d'harmoniser leurs règlements sur les satellites, a comblé de graves lacunes au niveau de la recherche et de l'analyse. L'Africa Satellite Atlas du CRDI accompagnait ce rapport. Ce site Web interactif permet de consul- ter, entre autres, les zones de couverture de certains satellites en Afrique.

  15. Transformation Artisanale Des Crevettes ( Penaeus Spp) Au Sud Du ...

    African Journals Online (AJOL)

    Transformation Artisanale Des Crevettes ( Penaeus Spp) Au Sud Du Bénin : Évaluation Des Performances Techniques Des Équipements Et Procédés De Fumage. ... This study aims to evaluate and compare the technical performances of the main important traditional smoking processes in the south of Benin. Therefore ...

  16. Glucose-mediated catalysis of Au nanoparticles in microgels.

    Science.gov (United States)

    Wu, Qingshi; Cheng, Han; Chang, Aiping; Xu, Wenting; Lu, Fan; Wu, Weitai

    2015-11-18

    The catalytic activity of Au nanoparticles in phenylboronic acid-containing polymer microgels can be tuned through the swelling-deswelling transition of the microgels in response to changes in glucose concentration. Upon adding glucose, the model catalytic reduction of hydrophilic 4-nitrophenol is accelerated, while the reduction of relatively more hydrophobic nitrobenzene slows down.

  17. January 2010 Port-au-Prince, Haiti Images

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — According to official estimates, 222,570 people killed, 300,000 injured, 1.3 million displaced, 97,294 houses destroyed and 188,383 damaged in the Port-au-Prince...

  18. Kiswahili nchini Kenya: ukuaji au ukiushi? | Momanyi | Kioo cha Lugha

    African Journals Online (AJOL)

    Makala inahoji kama haya ni maendeleo ya lugha au ni njia mojawapo ya kuidumaza isiweze kuchukua nafasi yake kama lugha ya taifa nchini. Katika sehemu ya mwisho ya makala, yanatolewa mapendekezo ambayo yamekusudiwa kusahihisha hali iliyopo ili kukifanya Kiswahili kama lugha muhimu nchini Kenya, iweze ...

  19. Des liens constructifs au Costa Rica | CRDI - Centre de recherches ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    18 oct. 2017 ... Une femme sur un chantier de construction. Madelaine Artavia Sotela. Madelaine Artavia Sotela a lancé sa propre entreprise de construction, dont la croissance est en partie attribuable au programme de WEConnect International. Alanna Mitchell, Canadian Geographic. WEConnect International jumelle ...

  20. Des liens constructifs au Costa Rica | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Une femme sur un chantier de construction. Madelaine Artavia Sotela. Madelaine Artavia Sotela a lancé sa propre entreprise de construction, dont la croissance est en partie attribuable au programme de WEConnect International. Alanna Mitchell, Canadian Geographic. WEConnect International jumelle des entreprises ...

  1. p-Aminoacetanilide mediated formation of assembly of Au ...

    Indian Academy of Sciences (India)

    Wintec

    The present method allows organization of NPs into linear arrays based on the molecular ... extent assembly of NPs, a systematic organization with controlled ... acetanilide as a mediator. In the earlier work,. 19 acet- anilide was used in the organization of Au NPs of single size (with appropriate distribution of particle sizes).

  2. Cartographie et ordinateur au lycée

    Directory of Open Access Journals (Sweden)

    Thierry HATT

    1987-06-01

    Full Text Available Travail de cartographie automatique et d'analyse de données au lycée, destiné à promouvoir une initiation à la recherche scientifique et à la maîtrise de l'image. Présentation des objectifs, du logiciel SESAM, des productions réalisées.

  3. Des outils novateurs pour lutter contre les maladies chroniques au ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    UNWRA). Les populations rurales du Liban ont, quant à elles, accès au système de santé national, mais n'ont souvent pas accès aux moyens de transport ou autres moyens nécessaires pour se rendre aux points de service.

  4. COMPORTEMENT DE CLONES DE PALMIER A HUILE AU CHAMP ...

    African Journals Online (AJOL)

    AISA

    ABSTRACT. OIL PALM CLONES CLONE BEHAVIOUR WITH RESPECT TO FUNGUS (Fusarium oxysporum f. sp elaeidis) ... about important damages powered to carry along a drop of production from 40 to 70 percent in some plots. .... Tableau 1 : Origine et indices moyens des clones de palmier à huile testés au champ sur.

  5. Synthesis of polyanthranilic acid–Au nanocomposites by emulsion ...

    Indian Academy of Sciences (India)

    Administrator

    recently garnered significant attention because of their unique and synergistic physiochemical property (Mirkin ... posites, special attention has been given to conducting polymers-Au based nanocomposite due its capability in ... overnight for complete polymerization. After 24 h, a blackish brown precipitate was collected by ...

  6. Le commerce des reptiles au Benin | Toudonou | Journal de la ...

    African Journals Online (AJOL)

    Four categories of actor animate these two trade-circuits: pick-ups, collectors, conditioners and consumers. Les reptiles sont diversement exploités dans le monde. Au Bénin et dans de nombreux pays africains, des spécimens entiers ou des organes d'agames, de crocodiles, de geckos, de scinques, de serpents, de tortues ...

  7. Internal Standard Method for the Determination of Au and some ...

    African Journals Online (AJOL)

    Abstract. A method is described for the determination of Au, Pt, Pd, Ru and Rh in a converter matte sample, using inductively coupled plasma optical emission spectrometry (ICP-OES), with Y or Sc as internal standard. The results obtained by this method are discussed and compared with values obtained by an independent ...

  8. Au-Biocompatible metallic nanostructures in metalloprotein electrochemistry and electrocatalysis

    DEFF Research Database (Denmark)

    Jensen, Palle Skovhus; Engelbrekt, Christian; Sørensen, Karsten Holm

    2012-01-01

    Molecular scale metallic nanoparticles coated by molecular monolayers and immobilized on single-crystal Au-electrode surfaces are efficient catalysts in metalloprotein voltammetry. Nanoparticles prepared by a new ‘‘green’’ method also exhibit strong electrocatalysis in both protein electrochemist...... and fuel cell related processes. In this communication we highlight some recent observations and discuss their possible physical origins....

  9. Templated Control of Au nanospheres in Silica Nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Tringe, J W; Vanamu, G; Zaidi, S H

    2007-03-15

    The formation of regularly-spaced metal nanostructures in selectively-placed insulating nanowires is an important step toward realization of a wide range of nano-scale electronic and opto-electronic devices. Here we report templated synthesis of Au nanospheres embedded in silica nanowires, with nanospheres consistently spaced with a period equal to three times their diameter. Under appropriate conditions, nanowires form exclusively on Si nanostructures because of enhanced local oxidation and reduced melting temperatures relative to templates with larger dimensions. We explain the spacing of the nanospheres with a general model based on a vapor-liquid-solid mechanism, in which an Au/Si alloy dendrite remains liquid in the nanotube until a critical Si concentration is achieved locally by silicon oxide-generated nanowire growth. Additional Si oxidation then locally reduces the surface energy of the Au-rich alloy by creating a new surface with minimum area inside of the nanotube. The isolated liquid domain subsequently evolves to become an Au nanosphere, and the process is repeated.

  10. Electronic Structure of Au25 Clusters: Between Discrete and Continuous

    KAUST Repository

    Katsiev, Khabiboulakh

    2016-07-15

    Here, an approach based on synchrotron resonant photoemission is emplyed to explore the transition between quantization and hybridization of the electronic structure in atomically precise ligand-stabilized nanoparticles. While the presence of ligands maintains quantization in Au25 clusters, their removal renders increased hybridization of the electronic states at the vicinity of the Fermi level. These observations are supported by DFT studies.

  11. Irrigation et information climatique au Burkina Faso (CARA) | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Au Burkina Faso, nombre d'agriculteurs ont choisi de recourir à un mélange de techniques agricoles traditionnelles et modernes. Bien que ces ... In the impoverished Bolivian Highlands (Altiplano), changes in local climate are already having significant impacts on infrastructure, land use, production, and livelihoods.

  12. manifestations ophtalmologiques au cours du syndrome d'apert

    African Journals Online (AJOL)

    Il faut insister sur la nécessité d'un bilan ophtalmologique soigneux avant et après la chirurgie. J. TUN ORL - N° 18 JUIN 2007. 47. MANIFESTATIONS OPHTALMOLOGIQUES AU COURS DU SYNDROME D'APERT. Fig. 3 : Champ visuel automatique: scotomes absolus. Fig. 1 : Syndrome d'Apert :exophtalmie. Fig. 2 : Photo ...

  13. Metabolisme du fer chez les drepanocytaires homozygotes au ...

    African Journals Online (AJOL)

    Objectif : Etudier le metabolisme du fer chez les drepanocytaires homozygotes regulierement suivi sans signes cliniques particuliers de carence en fer. Methodes : Etude transversale de janvier a juin 2008 portant sur 61 drepanocytaires homozygotes (35 hommes et 26 femmes) regulierement suivi au CHU-Campus de ...

  14. L'APPRENTISSAGE AU CERN - French version only

    CERN Multimedia

    Roland GAY

    2002-01-01

    APPRENTISSAGES TECHNIQUES FORMATION ET DEVELOPPEMENT HR/TD/AP L'APPRENTISSAGE AU CERN pour les professions d'électronicien(ne) et de laborant(ine) en physique L'apprentissage au CERN est régi par les lois, règlements et contrats en vigueur dans le Canton de Genève. En cas de réussite à l'examen de fin d'apprentissage, les apprentis obtiennent le Certificat Fédéral de Capacité Suisse (CFC). 7 places au total sont ouvertes au recrutement pour les deux professions. L'apprentissage dure 4 ans. Minima requis pour faire acte de candidature :   avoir terminé la scolarité obligatoire être ressortissant d'un pays membre du CERN (Allemagne, Autriche, Belgique, Bulgarie, Danemark, Espagne, Finlande, France, Grèce, Hongrie, Italie, Norvège, Pays-Bas, Pologne, Portugal, République slovaque, République tchèque, Royaume-Uni, Su&a...

  15. Synthesis of polyanthranilic acid–Au nanocomposites by emulsion ...

    Indian Academy of Sciences (India)

    Administrator

    Intensity ratio. (IQ/IB) of the band is also found to be higher in case of nanocomposite and, hence, supports higher oxidized state of polymer (Reddy et al 2008). Redox property of PANA–Au nanocomposites was studied using differential pulse voltammetric technique. Equal amounts of nanocomposite were coated over plati-.

  16. Synthesis of polyanthranilic acid–Au nanocomposites by emulsion ...

    Indian Academy of Sciences (India)

    Polyanthranilic acid (PANA) and polyanthranilic acid–gold (PANA–Au) nanocomposites have been synthesized through emulsion polymerization technique. Use of gold chloride as an oxidant for anthranilic acid not only provides a new route for chemical synthesis of PANA, but also explores a facile method for the formation ...

  17. EST Table: AU003879 [KAIKOcDNA[Archive

    Lifescience Database Archive (English)

    Full Text Available AU003879 ws00697 11/12/09 n.h 10/09/28 39 %/206 aa ref|XP_001867321.1| partner of drosha... [Culex quinquefasciatus] gb|EDS44779.1| partner of drosha [Culex quinquefasciatus] 10/08/28 44 %/152 a

  18. Sécurité alimentaire et changements climatiques au Cambodge ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Sécurité alimentaire et changements climatiques au Cambodge. Le Cambodge est l'un des pays les plus pauvres d'Asie. Quelque 70 % de la population gagne sa vie grâce à l'agriculture. L'insécurité alimentaire, dont souffre un nombre grandissant de personnes, touche particulièrement les populations rurales.

  19. Anticoagulant Resistance

    DEFF Research Database (Denmark)

    Heiberg, Ann-Charlotte

    Although sewer rat control is carried out in more than 80 % of all Danish municipalities, with usage of large amounts of anticoagulant rodenticides, knowledge on anticoagulant resistance among rats living in the sewers is limited. As rat problems in urban areas are believed to be related to sewer...... problems (70-90 % in UK and DK) unawareness of resistance amongst these populations of Brown rats may constitute a future control problem and knowledge on this issue has become crucial. Rats were captured in sewers from seven different locations in the suburban area of Copenhagen. Locations was chosen...... to represent different sewer rat management strategies i) no anticoagulants for approx. 20 years ii) no anticoagulants for the last 5 years and iii) continuous control for many years. Animals were tested for resistance to bromadiolone by Blood-Clotting Response test, as bromadiolone is the most frequently used...

  20. Reducing Resistance

    DEFF Research Database (Denmark)

    Lindell, Johanna

    care may influence decisions on antibiotic use. Based on video-and audio recordings of physician-patient consultations it is investigated how treatment recommendations are presented, can be changed, are forecast and explained, and finally, how they seemingly meet resistance and how this resistance......Antibiotic resistance is a growing public health problem both nationally and internationally, and efficient strategies are needed to reduce unnecessary use. This dissertation presents four research studies, which examine how communication between general practitioners and patients in Danish primary...... is responded to.The first study in the dissertation suggests that treatment recommendations on antibiotics are often done in a way that encourages patient acceptance. In extension of this, the second study of the dissertation examines a case, where acceptance of such a recommendation is changed into a shared...