WorldWideScience

Sample records for resins patent application

  1. Phenolic cation-exchange resin material for recovery of cesium and strontium. [Patent application

    Science.gov (United States)

    Ebra, M.A.; Wallace, R.M.

    1982-05-05

    A phenolic cation exchange resin with a chelating group has been prepared by reacting resorcinol with iminodiacetic acid in the presence of formaldehyde at a molar ratio of about 1:1:6. The material is highly selective for the simultaneous recovery of both cesium and strontium from aqueous alkaline solutions, such as, aqueous alkaline nuclear wate solutions. The organic resins are condensation polymers of resorcinol and formaldehyde with attached chelating groups. The column performance of the resins compares favorably with that of commercially available resins for either cesium or strontium removal. By combining Cs/sup +/ and Sr/sup 2 +/ removal in the same bed, the resins allow significant reduction of the size and complexity of facilities for processing nuclear waste.

  2. Use of 2,5-dimethyl-2,5-hexane diamine as a curing agent for epoxy resins. [Patent application

    Science.gov (United States)

    Rinde, J.A.; Newey, H.A.

    Primary diamines are prepared for use as a curing agent for epoxy resins. These curing agents can be used to form epoxy resin mixtures useful in filament winding and preimpregnated fiber molding and in formulating film adhesives, powder coatings and molding powders. The epoxy mixtures form for such uses a room temperature non-reacting, intermediate stable state which has a latent cross-linking capability.

  3. 37 CFR 1.81 - Drawings required in patent application.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Drawings required in patent..., DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES National Processing Provisions The Drawings § 1.81 Drawings required in patent application. (a) The applicant for a patent is required to furnish...

  4. 37 CFR 1.41 - Applicant for patent.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Applicant for patent. 1.41 Section 1.41 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES National Processing Provisions Who May Apply for A...

  5. 37 CFR 1.14 - Patent applications preserved in confidence.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Patent applications preserved in confidence. 1.14 Section 1.14 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES General Provisions...

  6. 37 CFR 1.215 - Patent application publication.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Patent application publication. 1.215 Section 1.215 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES National Processing Provisions Publication...

  7. Comprehension and application of patent information

    International Nuclear Information System (INIS)

    Lee, Sang Nam

    2004-05-01

    This book gives descriptions of conception of patent information such as the meaning, characteristic, function, investigation and map of patent information, pro-patent period and patent strategy of the business. It also deals with comprehension of patent information like publication of nations, patent document, patent procedure in Korea, patent procedure in Japan, the U.S, and Europe, article and function of patent document, patent information survey such as writing of search keyword, procedure of the survey and search site of other countries, patent analysis and patent map.

  8. Trends in worldwide nanotechnology patent applications: 1991 to 2008

    OpenAIRE

    Dang, Yan; Zhang, Yulei; Fan, Li; Chen, Hsinchun; Roco, Mihail C.

    2009-01-01

    Nanotechnology patent applications published during 1991?2008 have been examined using the ?title?abstract? keyword search on esp@cenet ?worldwide? database. The longitudinal evolution of the number of patent applications, their topics, and their respective patent families have been evaluated for 15 national patent offices covering 98% of the total global activity. The patent offices of the United States (USA), People?s Republic of China (PRC), Japan, and South Korea have published the larges...

  9. Trends in worldwide nanotechnology patent applications: 1991 to 2008

    International Nuclear Information System (INIS)

    Dang Yan; Zhang Yulei; Fan Li; Chen Hsinchun; Roco, Mihail C.

    2010-01-01

    Nanotechnology patent applications published during 1991-2008 have been examined using the 'title-abstract' keyword search on esp-cenet 'worldwide' database. The longitudinal evolution of the number of patent applications, their topics, and their respective patent families have been evaluated for 15 national patent offices covering 98% of the total global activity. The patent offices of the United States (USA), People's Republic of China (PRC), Japan, and South Korea have published the largest number of nanotechnology patent applications, and experienced significant but different growth rates after 2000. In most repositories, the largest numbers of nanotechnology patent applications originated from their own countries/regions, indicating a significant 'home advantage.' The top applicant institutions are from different sectors in different countries (e.g., from industry in the US and Canada patent offices, and from academe or government agencies at the PRC office). As compared to 2000, the year before the establishment of the US National Nanotechnology Initiative (NNI), numerous new invention topics appeared in 2008, in all 15 patent repositories. This is more pronounced in the USA and PRC. Patent families have increased among the 15 patent offices, particularly after 2005. Overlapping patent applications increased from none in 1991 to about 4% in 2000 and to about 27% in 2008. The largest share of equivalent nanotechnology patent applications (1,258) between two repositories was identified between the US and Japan patent offices.

  10. Trends in worldwide nanotechnology patent applications: 1991 to 2008

    Science.gov (United States)

    Dang, Yan; Zhang, Yulei; Fan, Li; Chen, Hsinchun; Roco, Mihail C.

    2010-03-01

    Nanotechnology patent applications published during 1991-2008 have been examined using the "title-abstract" keyword search on esp@cenet "worldwide" database. The longitudinal evolution of the number of patent applications, their topics, and their respective patent families have been evaluated for 15 national patent offices covering 98% of the total global activity. The patent offices of the United States (USA), People's Republic of China (PRC), Japan, and South Korea have published the largest number of nanotechnology patent applications, and experienced significant but different growth rates after 2000. In most repositories, the largest numbers of nanotechnology patent applications originated from their own countries/regions, indicating a significant "home advantage." The top applicant institutions are from different sectors in different countries (e.g., from industry in the US and Canada patent offices, and from academe or government agencies at the PRC office). As compared to 2000, the year before the establishment of the US National Nanotechnology Initiative (NNI), numerous new invention topics appeared in 2008, in all 15 patent repositories. This is more pronounced in the USA and PRC. Patent families have increased among the 15 patent offices, particularly after 2005. Overlapping patent applications increased from none in 1991 to about 4% in 2000 and to about 27% in 2008. The largest share of equivalent nanotechnology patent applications (1,258) between two repositories was identified between the US and Japan patent offices.

  11. Trends in worldwide nanotechnology patent applications: 1991 to 2008

    Energy Technology Data Exchange (ETDEWEB)

    Dang Yan, E-mail: ydang@email.arizona.edu; Zhang Yulei, E-mail: ylzhang@email.arizona.edu; Fan Li, E-mail: fanli@email.arizona.edu; Chen Hsinchun, E-mail: hchen@eller.arizona.ed [University of Arizona, Department of Management Information Systems, Eller College of Management (United States); Roco, Mihail C., E-mail: mroco@nsf.go [National Science Foundation (United States)

    2010-03-15

    Nanotechnology patent applications published during 1991-2008 have been examined using the 'title-abstract' keyword search on esp-cenet 'worldwide' database. The longitudinal evolution of the number of patent applications, their topics, and their respective patent families have been evaluated for 15 national patent offices covering 98% of the total global activity. The patent offices of the United States (USA), People's Republic of China (PRC), Japan, and South Korea have published the largest number of nanotechnology patent applications, and experienced significant but different growth rates after 2000. In most repositories, the largest numbers of nanotechnology patent applications originated from their own countries/regions, indicating a significant 'home advantage.' The top applicant institutions are from different sectors in different countries (e.g., from industry in the US and Canada patent offices, and from academe or government agencies at the PRC office). As compared to 2000, the year before the establishment of the US National Nanotechnology Initiative (NNI), numerous new invention topics appeared in 2008, in all 15 patent repositories. This is more pronounced in the USA and PRC. Patent families have increased among the 15 patent offices, particularly after 2005. Overlapping patent applications increased from none in 1991 to about 4% in 2000 and to about 27% in 2008. The largest share of equivalent nanotechnology patent applications (1,258) between two repositories was identified between the US and Japan patent offices.

  12. 37 CFR 1.5 - Identification of patent, patent application, or patent-related proceeding.

    Science.gov (United States)

    2010-07-01

    ... UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES General Provisions General Information and Correspondence § 1.5 Identification of patent, patent... benefit of the date of deposit with the United States Postal Service. If the returned correspondence is...

  13. The shadow of inequitable conduct in the US patent application.

    Science.gov (United States)

    Chang, Bao-Chi; Wang, Shyh-Jen

    2016-05-03

    Inequitable conduct regarding any single claim can render the entire patent unenforceable and further damage other related patents and applications in the assignee's patent portfolio. The adverse impact of inequitable conduct significantly became a litigation strategy. The US Federal Circuit (CAFC) observed that inequitable conduct as a patent litigation strategy had become a plague and thus tightened the standard for finding inequitable conduct in a case with full court judges. However, under the shadow of previous adverse impact of inequitable conduct, patent applicants may still submit many marginal related references. This study demonstrates that an applicant even prepared an information disclosure statement (IDS) as many as 50 pages. Actually, under the new standard, inequitable conduct would not further produce significant impact in the US patent system. Thus, a patent applicant need not submit marginal references but should distinguish the prior art from the current application, especially for those listed in the IDS, to avoid the novelty rejection.

  14. 25 CFR 152.4 - Application for patent in fee.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Application for patent in fee. 152.4 Section 152.4 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAND AND WATER ISSUANCE OF PATENTS IN FEE, CERTIFICATES OF COMPETENCY, REMOVAL OF RESTRICTIONS, AND SALE OF CERTAIN INDIAN LANDS Issuing Patents in Fee...

  15. Confidential patent application with an example of preparation

    Directory of Open Access Journals (Sweden)

    Obrad T. Čabarkapa

    2013-12-01

    Full Text Available In order that the invention solving a technical problem receives a patent protection, it is necessary to file a patent application. For the protection of confidential inventions which are important for defense and national security, a confidential patent application[1] must be filed. A confidential patent application is an important and complex document, the parts of which are,  in principle, exposed in an established order. For the preparation of patent applications, it is necessary to engage experts with higher education, primarily in the technical field the invention relates to. The contents of the patent application is a basis for examining whether the application meets the requirements for patentability and whether the right to patent protection is achieved. Besides theoretical discussions on patent application, the paper gives a short version of an example of an application regarding a protected confidential invention. Introduction The basic condition for the exercise of patent protection is filing a patent application, the test procedure and, eventually, depending on the test results - the recognition or rejection of the patent. The paper gives a description of all parts of the patent application on an example of a confidential invention already patented. The content of the confidential patent application The confidential patent application for confidential invention protection consists of the following parts: The application for a patent; description of the invention; the claims (indication of what is new and what is required to be protected by patenting; abstract (short summary of the invention  and a draft of the invention (to which the description and the claims are referred. The application for a patent The application for patent is filed on Form P-1 and a request for the petty patent on Form MP-1. The data entered in the file is, for example: the applicant; the lawyer; the name of the invention in Serbian and English; the inventor

  16. Biotechnological Patents Applications of the Deuterium Oxide in Human Health.

    Science.gov (United States)

    da S Mariano, Reysla M; Bila, Wendell C; Trindade, Maria Jaciara F; Lamounier, Joel A; Galdino, Alexsandro S

    2017-01-01

    Deuterium oxide is a molecule that has been used for decades in several studies related to human health. Currently, studies on D2O have mobilized a "Race for Patenting" worldwide. Several patents have been registered from biomedical and technological studies of D2O showing the potential of this stable isotope in industry and health care ecosystems. Most of the patents related to the applications of the deuterium oxide in human health have been summarized in this review. The following patents databases were consulted: European Patent Office (Espacenet), the United States Patent and Trademark Office (USPTO), the United States Latin America Patents (LATIPAT), Patent scope -Search International and National Patent Collections (WIPO), Google Patents and Free Patents Online. With this review, the information was collected on recent publications including 22 patents related to deuterium oxide and its applications in different areas. This review showed that deuterium oxide is a promising component in different areas, including biotechnology, chemistry and medicine. In addition, the knowledge of this compound was covered, reinforcing its importance in the field of biotechnology and human health. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  17. Published patent applications and patents from the promoted R + D area

    International Nuclear Information System (INIS)

    Jaeckel, G.; Zierl, I.

    1977-09-01

    The Ministry for Research and Technology of the Federal Republic of Germany has sponsored technological R + D for industrial innovations since 1969. The following compilation includes the published patent applications and patents from all projects which were sponsored up to and including 1973. (orig.) [de

  18. The problem and solution of enterprise patent application

    International Nuclear Information System (INIS)

    Li Dabo; Yang Xiaoqing

    2010-01-01

    Recently, the situation of Chinese patent application is pleasant, but there are still some hiding disquiets. For the most enterprises, the passion of current patent application may not be derived from the internal motility but mainly derived by the government policy. Because of the shortage of related knowledge on patent, there are still some problems for our enterprises, such as blurring the scope of patent application and failing the organization of the documents of patent application which causing the patent cannot be applied timely. In some cases, the patent cannot obtain the effective protection even if it has been applied and obtained the authorization successfully. For such problems, we should enhance the cooperation between enterprises and agency organizations and build a patent engineer group which should participate in the whole R and D process and can prepare the documents of the patent application effectively and timely. What's more, we should inhibit the phenomena of infringement of patent rights and use 'existing technique' effectively by the methods of document retrieval. (authors)

  19. 37 CFR 1.178 - Original patent; continuing duty of applicant.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Original patent; continuing... Provisions Reissues § 1.178 Original patent; continuing duty of applicant. (a) The application for reissue of... upon reissue of the patent. Until a reissue application is granted, the original patent shall remain in...

  20. Prior art relevant to active beads patent application

    CSIR Research Space (South Africa)

    Moolman, S

    2002-06-01

    Full Text Available -extrusion of shell (gelatin) and core (oral refrigerant or spice condiment) US 4,332,790 Nestlé patent on manufacturing fat microcapsules containing micro-organisms Patents cited by International Search Report on previous application US 5,543,162 Polymeric...

  1. 37 CFR 1.730 - Applicant for extension of patent term; signature requirements.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Applicant for extension of patent term; signature requirements. 1.730 Section 1.730 Patents, Trademarks, and Copyrights UNITED... for extension of patent term; signature requirements. (a) Any application for extension of a patent...

  2. Application of THOR-Technology on resins

    International Nuclear Information System (INIS)

    Lorenzen, J.; Lindberg, M.

    2003-01-01

    The THermal Organic Reduction (THOR) process, developed and patented by studsvik utilises pyrolysis / steam reforming technology. The THOR-process provides a reliable and safe method for treating a wide variety of LLW in a unique, fluidised bed treatment system at moderate temperature. This technology is suitable for processing hazardous, mixed and dry active LLW with appropriate waste feed modifications. Both solid and liquid LLRW and ILRW streams including ion exchange resins, activated carbon (charcoal), graphite, oils, solvents and cleaning solutions with contact radiation levels of up to 4 Sv/hr can be processed. Studsvik has completed over four years of operation at its facility at Erwin, Tennessee, USA. During this period studsvik has processed more than 1,5 thousand tons of radioactive ion exchange bead resins. powdered filter media and active carbon, with a cumulative total radioactivity of about 7 (E+8) MBq. Operations have demonstrated consistent, reliable, robust operating characteristics. Due to the widely varying characteristics of the incoming waste streams various efficiencies and volume reductions have been experienced. Input waste has varied in total inorganic content from 90%. A substantial element of this variability has been the ''soluble salt'' content of the input waste streams. Final reformed residue comprises a non-dispersible, granular solid which is suitable for long-term storage or direct burial in a qualified container. Special containers, THOR-liners, are available from studsvik for the transport of waste from the customer to the Erwin facility and HICs (high integrity containers) for transport of the residues to Barnwell. The paper will give an overview of the last four years of commercial operations processing LLRW from commercial nuclear power plans. (orig.)

  3. Patenting of university and non-university public research organisations in Germany: evidence from patent applications for medical research results.

    Directory of Open Access Journals (Sweden)

    Peter Tinnemann

    Full Text Available BACKGROUND: Patents are one of the most important forms of intellectual property. They grant a time-limited exclusivity on the use of an invention allowing the recuperation of research costs. The use of patents is fiercely debated for medical innovation and especially controversial for publicly funded research, where the patent holder is an institution accountable to public interest. Despite this controversy, for the situation in Germany almost no empirical information exists. The purpose of this study is to examine the amount, types and trends of patent applications for health products submitted by German public research organisations. METHODS/PRINCIPAL FINDINGS: We conducted a systematic search for patent documents using the publicly accessible database search interface of the German Patent and Trademark Office. We defined keywords and search criteria and developed search patterns for the database request. We retrieved documents with application date between 1988 and 2006 and processed the collected data stepwise to compile the most relevant documents in patent families for further analysis. We developed a rationale and present individual steps of a systematic method to request and process patent data from a publicly accessible database. We retrieved and processed 10194 patent documents. Out of these, we identified 1772 relevant patent families, applied for by 193 different universities and non-university public research organisations. 827 (47% of these patent families contained granted patents. The number of patent applications submitted by universities and university-affiliated institutions more than tripled since the introduction of legal reforms in 2002, constituting almost half of all patent applications and accounting for most of the post-reform increase. Patenting of most non-university public research organisations remained stable. CONCLUSIONS: We search, process and analyse patent applications from publicly accessible databases

  4. A patent landscape on application of microorganisms in construction industry.

    Science.gov (United States)

    Dapurkar, Dipti; Telang, Manasi

    2017-07-01

    Construction biotechnology includes research and development of construction materials and processes that make use of various microbes. The present technology landscape gives a perspective on how microbes have been used in construction industry as cement and concrete additives by analyzing patents filed in this technology arena. All patents related to the technology of interest published globally to date have been reviewed. The earliest patent filing in this technology domain was recorded in the year 1958 and the patenting activity reached its peak around mid to late 1990s. The early technology was mainly focused on microbial polysaccharides and other metabolic products as additives. Year 2002 onwards, biomineralization has taken precedence over the other technologies with consistent patent filings indicating a shift in innovation focus. Japan has been the global leader with highest number of patents filed on application of microbes in construction industry. Southeast University, China has topped the patent assignee list with maximum number of filings followed by Kajima Corp. and Shin-Etsu Chemical Co., Ltd. Most patent applications have claimed microbe based bio-products. Construction-related microbial technologies are mainly based on activity of different microorganisms such as urease-producing, acidogenic, halophilic, alkaliphilic, nitrate and iron-reducing bacteria. Sporosarcina pasteurii has been the most widely used microbe for biomineralization.

  5. 76 FR 57720 - Intent To Grant an Exclusive Patent License

    Science.gov (United States)

    2011-09-16

    ... DEPARTMENT OF DEFENSE Department of the Air Force Intent To Grant an Exclusive Patent License... in: U.S. Patent Application No. 12/932,341, filed on February 23, 2011, entitled ``Resin-Based... INFORMATION CONTACT: An exclusive license for the invention described in this patent application will be...

  6. 37 CFR 1.17 - Patent application and reexamination processing fees.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Patent application and reexamination processing fees. 1.17 Section 1.17 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES General Provisions Fees...

  7. 37 CFR 1.770 - Express withdrawal of application for extension of patent term.

    Science.gov (United States)

    2010-07-01

    ... Adjustment and Extension of Patent Term Extension of Patent Term Due to Regulatory Review § 1.770 Express... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Express withdrawal of application for extension of patent term. 1.770 Section 1.770 Patents, Trademarks, and Copyrights UNITED...

  8. 22 CFR 92.72 - Services in connection with patents and patent applications.

    Science.gov (United States)

    2010-04-01

    ... depends on who is making the application, the type of invention, and the circumstances of the case... this section regarding authentication of the authority of a foreign official. A notary or other... United States Patent Office.) (c) Authentication of authority of foreign official—(1) Necessity for...

  9. Trends in genetic patent applications: The commercialization of academic intellectual property

    NARCIS (Netherlands)

    Kers, J.G.; van Burg, J.C.; Stoop, T.; Cornel, M.C.

    2014-01-01

    We studied trends in genetic patent applications in order to identify the trends in the commercialization of research findings in genetics. To define genetic patent applications, the European version (ECLA) of the International Patent Classification (IPC) codes was used. Genetic patent applications

  10. Trends in genetic patent applications: the commercialization of academic intellectual property.

    Science.gov (United States)

    Kers, Jannigje G; Van Burg, Elco; Stoop, Tom; Cornel, Martina C

    2014-10-01

    We studied trends in genetic patent applications in order to identify the trends in the commercialization of research findings in genetics. To define genetic patent applications, the European version (ECLA) of the International Patent Classification (IPC) codes was used. Genetic patent applications data from the PATSTAT database from 1990 until 2009 were analyzed for time trends and regional distribution. Overall, the number of patent applications has been growing. In 2009, 152 000 patent applications were submitted under the Patent Cooperation Treaty (PCT) and within the EP (European Patent) system of the European Patent Office (EPO). The number of genetic patent applications increased until a peak was reached in the year 2000, with >8000 applications, after which it declined by almost 50%. Continents show different patterns over time, with the global peak in 2000 mainly explained by the USA and Europe, while Asia shows a stable number of >1000 per year. Nine countries together account for 98.9% of the total number of genetic patent applications. In The Netherlands, 26.7% of the genetic patent applications originate from public research institutions. After the year 2000, the number of genetic patent applications dropped significantly. Academic leadership and policy as well as patent regulations seem to have an important role in the trend differences. The ongoing investment in genetic research in the past decade is not reflected by an increase of patent applications.

  11. 40 CFR 414.50 - Applicability; description of the thermosetting resins subcategory.

    Science.gov (United States)

    2010-07-01

    ... thermosetting resins subcategory. 414.50 Section 414.50 Protection of Environment ENVIRONMENTAL PROTECTION... Thermosetting Resins § 414.50 Applicability; description of the thermosetting resins subcategory. The provisions... the products classified under SIC 28214 thermosetting resins including those resins and resin groups...

  12. Development and application of high performance resins for crud removal

    International Nuclear Information System (INIS)

    Deguchi, Tatsuya; Izumi, Takeshi; Hagiwara, Masahiro

    1998-01-01

    The development of crud removal technology has started with the finding of the resin aging effect that an old ion exchange resin, aged by long year of use in the condensate demineralizer, had an enhanced crud removal capability. It was confirmed that some physical properties such as specific surface area and water retention capacity were increased due to degradation caused by long year of contact with active oxygens in the condensate water. So, it was speculated that those degradation in the resin matrix enhanced the adsorption of crud particulate onto the resin surface, hence the crud removal capability. Based on this, crud removal resin with greater surface area was first developed. This resin has shown an excellent crud removal efficiency in an actual power plant, and the crud iron concentration in the condensate effluent was drastically reduced by this application. However, the cross-linkage of the cation resin had to be lowered in a delicate manner for that specific purpose, and this has caused higher organic leachables from the resin, and the sulfate level in the reactor was raised accordingly. Our major goals, therefore, has been to develop a crud resin of as little organic leachables as possible with keeping the original crud removal efficiency. It was revealed through the evaluation of the first generation crud resin and its improved version installed in the actual condensate demineralizers that there was a good correlation between crud removal efficiency and organic leaching rate. The bast one among a number of developmental resins has shown the organic leaching rate of 1/10 of that of the original crud resin (ETR-C), and the crud removal efficiency of 90%. So far as we understand, the resin was considered to have the best overall balance between crud removal and leaching characteristics. The result of six month evaluation of this developmental resin, ETR-C3, in one vessel of condensate demineralizer of a power plant will be presented. (J.P.N.)

  13. Analytical applications of resins containing amide and polyamine functional groups

    International Nuclear Information System (INIS)

    Orf, G.M.

    1977-12-01

    A dibutyl amide resin is used for the separation of uranium(VI), thorium(IV), and zirconium(IV) from each other and several other metal ions. Uranium(VI) and thorium(IV) are determined in the presence of large excesses of foreign metal ions and anions. A practical application of the amide resin is studied by determining uranium in low grade uranium ores. The amide resin is also used for the selective concentration of gold(III) from sea water

  14. Analytical applications of resins containing amide and polyamine functional groups

    Energy Technology Data Exchange (ETDEWEB)

    Orf, Gene Michael [Iowa State Univ., Ames, IA (United States)

    1977-12-01

    A dibutyl amide resin is used for the separation of uranium(VI), thorium(IV), and zirconium(IV) from each other and several other metal ions. Uranium(VI) and thorium(IV) are determined in the presence of large excesses of foreign metal ions and anions. A practical application of the amide resin is studied by determining uranium in low grade uranium ores. The amide resin is also used for the selective concentration of gold(III) from sea water.

  15. Ethics in scientific results application: Gene and life forms patenting

    Directory of Open Access Journals (Sweden)

    Konstantinov Kosana

    2010-01-01

    Full Text Available The remarkable development and application of new genetic technologies over the past decades has been accompanied by profound changes in the way in which research is commercialized in the life sciences. As results, new varieties of commercially grown crops with improved or new traits are developed. Many thousands of patents which assert rights over DNA sequences have been granted to researchers across the public and private sector. The effects of many of these patents are extensive, because inventors who assert rights over DNA sequences obtain protection on all uses of the sequences. Extremely valuable to breeders in the national agricultural research system is the ability to genotype their collections to get a clear picture of their diversity and how diversity could be enhanced through sharing and access to global collections. The issue of the eligibility for patenting of DNA sequences needs to be reopened. Patents that assert rights over DNA sequences and their uses are, in some cases, supportable, but in others, should be treated with great caution. Rights over DNA sequences as research tools should be discouraged. That the best way to discourage the award of such patents is by stringent application of the criteria for patenting, particularly utility. A more equitable, ethically - based food and agricultural system must incorporate concern for three accepted global goals: improved well being, protection of the environment and improved public health (particular point food from GMO. To mitigate conflict one of the approach to solve problem is ethical and truthful label of GM food, because consumers have a right to choose whether to eat genetically modified foods or not. Interesting examples and risks as consequences of free availability of genetic resources utilization, its transformation, patenting of 'new' organism and selling it back to the genetic resource owner are presented. Society has obligations to raise levels of nutrition and

  16. Decoding Patent Information Using Patent Maps

    OpenAIRE

    Liu, Chen-Yuan; Yang, James Chingyu

    2008-01-01

    Patent information is a derivative product from the legal patent system. This information, which includes patent applications, patent descriptions, patent gazettes, patent abstracts, and patent data, is prepared in exact compliance with the regulations and specifications of the patent acts. Patent information, different from other published circulating information, is legally well protected. For convenience, this study classifies patent information into bibliographic and numeric data to creat...

  17. 75 FR 30773 - United States Patent Applicant Survey

    Science.gov (United States)

    2010-06-02

    ... comments by any of the following methods: E-mail: [email protected] . Include ``0651- 0052... several years the USPTO has supported an ongoing forecasting program for patent application filings that includes the use of quantitative and qualitative methodologies. Given the importance of accurate...

  18. Analytical applications of resins containing amide and polyamine functional groups

    International Nuclear Information System (INIS)

    Orf, G.M.

    1977-01-01

    Resins are prepared by chemically bonding N,N-dialkylamides and polyamine functional groups to Amberlite XAD-4. These resins are applied to the concentration of metal ions from dilute aqueous solution and the rapid separation of metal ions by high-speed liquid chromatography with continuous on-line detection of the eluent stream. A dibutyl amide resin is used for the separation of uranium(VI), thorium(IV), and zirconium(IV) from each other and several other metal ions. Uranium(VI) and thorium(IV) are determined in the presence of large excesses of foreign metal ions and anions. A practical application of the amide resin is studied by determining uranium in low grade uranium ores. The amide resin is also used for the selective concentration of gold(III) from seawater. A triethylenetetramine resin is used for the separation of copper(II) from equal molar amounts and large excesses of nickel(II), cobalt(II), zinc(II), cadmium(II), iron(III) and aluminum(III). Copper(II), nickel(II), zinc(II), cobalt(II) and cadmium(II) are determined in the presence of large excesses of calcium(II) and magnesium(II). The resin was found to be selective for silver(I) and mercury(II) at low pH values and a rapid separation of equal molar amounts of copper(II) and silver(I) was performed. The resin was also found to have an affinity for anionic metal complexes such as iron(III)-tartrate when the resin is in the hydrogen form. A study of the retention of the anions chromium(III)-tartrate and dichromate at various pH values was performed to better understand the anion exchange properties of the resin. Triethylenetetramine resins were also prepared from polystyrene gel to make a resin with higher capacities for copper

  19. 37 CFR 1.130 - Affidavit or declaration to disqualify commonly owned patent or published application as prior art.

    Science.gov (United States)

    2010-07-01

    ... disqualify commonly owned patent or published application as prior art. 1.130 Section 1.130 Patents... or declaration to disqualify commonly owned patent or published application as prior art. (a) When.... patent or U.S. patent application publication which is not prior art under 35 U.S.C. 102(b), and the...

  20. Technological Monitoring Study Based on Invention Patents of Omeprazoleand Derivatives with Pharmaceutical Applications

    Directory of Open Access Journals (Sweden)

    Leandra Guimarães de Oliveira

    2010-11-01

    Full Text Available The current study intends to present the relevance of omeprazole, esomeprazole, rabeprazole, pantoprazole and lansoprazole by means of the technological foresight study, through invention patent documents from Brazilian applicants as indicators of innovation. The European database of patents (Espacenet, Word Patent Index (DERWENT and the Brazilian Patent Base of INPI were used, combining keywords and International Patent Classifications. The major applicants, countries of publication and claims categories were mapped. The 212 patent requests collected are mainly distributed in Chemistry, Pharmacy and Pharmacology areas. The results obtained revealed that the US was the main country with studies directed to this technological area (59 patent applications and the major applicant was the company Astrazeneca AB. Therefore, we can understand that this is a promising technology that may reflect in an increase of R&D activities and patent applications in this area.

  1. Application conditions for ester cured alkaline phenolic resin sand

    Directory of Open Access Journals (Sweden)

    Ren-he Huang

    2016-07-01

    Full Text Available Five organic esters with different curing speeds: propylene carbonate (i.e. high-speed ester A; 1, 4-butyrolactone; glycerol triacetate (i.e. medium-speed ester B; glycerol diacetate; dibasic ester (DBE (i.e. low-speed ester C, were chosen to react with alkaline phenolic resin to analyze the application conditions of ester cured alkaline phenolic resin. The relationships between the curing performances of the resin (including pH value, gel pH value, gel time of resin solution, heat release rate of the curing reaction and tensile strength of the resin sand and the amount of added organic ester and curing temperature were investigated. The results indicated the following: (1 The optimal added amount of organic ester should be 25wt.%-30wt.% of alkaline phenolic resin and it must be above 20wt.%-50 wt.% of the organic ester hydrolysis amount. (2 High-speed ester A (propylene carbonate has a higher curing speed than 1, 4-butyrolactone, and they were both used as high-speed esters. Glycerol diacetate is not a high-speed ester in alkaline phenolic resin although it was used as a high-speed ester in ester cured sodium silicate sand; glycerol diacetate and glycerol triacetate can be used as medium-speed esters in alkaline phenolic resin. (3 High-speed ester A, medium-speed ester B (glycerol triacetate and low-speed ester C (dibasic ester, i.e., DBE should be used below 15 ìC, 35 ìC and 50 ìC, respectively. High-speed ester A or low-speed ester C should not be used alone but mixed with medium-speed ester B to improve the strength of the resin sand. (4 There should be a suitable solid content (generally 45wt.%-65wt.% of resin, alkali content (generally 10wt.%-15wt.% of resin and viscosity of alkaline phenolic resin (generally 50-300 mPa≤s in the preparation of alkaline phenolic resin. Finally, the technique conditions of alkaline phenolic resin preparation and the application principles of organic ester were discussed.

  2. Recent Advances in Vaccines Against Leishmania Based on Patent Applications.

    Science.gov (United States)

    Thomaz-Soccol, Vanete; Ferreira da Costa, Eduardo Scopel; Karp, Susan Grace; Junior Letti, Luiz Alberto; Soccol, Flavia Thomaz; Soccol, Carlos Ricardo

    2018-01-01

    Leishmaniasis is caused by parasites of the genus Leishmania, and represents a group of chronic diseases with an epidemiological and clinical diversity. The disease is endemic in tropical regions, being found in 98 countries, affecting around 12 million people, with an estimated increase of 1.5 million per year. The present review aims to analyze recent and most important patents regarding development of vaccines to improve immunization against leishmaniasis. For this purpose, the Web of Science - Derwent Innovations Index was consulted. There is also a short description of the licensed vaccines already on the market for commercialization, and a critical opinion on future developments. The data herein presented comprises national and international filings, thus considering the patent's country of origin, and can be used an indicator of a country's technological development regarding a specific field. Several types of vaccines against Leishmania were studied. The main classes comprise: vaccines using live cells (virulent or attenuated); dead cells; containing recombinant protein; using DNA of the parasite. United States (74 patents) leads the ranking of patent applications for vaccines against Leishmania, followed by Brazil (36 patents), which is an endemic region of leishmaniasis with 20,000 human cases of cutaneous leishmaniasis and over 3,000 cases of visceral form. This review showed that there is still a lot of space for development regarding the creation of a feasible, effective vaccine against leishmaniasis. The scientific community appears to be taking steps in the right direction, though. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  3. Current Energy Patents

    International Nuclear Information System (INIS)

    Kelly, R.C.

    1982-01-01

    Current Energy Patents (CEP) provides abstracting and indexing coverage of the international patent literature, including patent applications, that concerns any aspect of energy production, conservation, and utilization

  4. Patent Applications on Representative Sectors of Biotechnology in Brazil: an Analysis of the Last Decade

    Directory of Open Access Journals (Sweden)

    Liliana Machado Mendes

    2013-12-01

    The website of European Patent Office (EPO patent database - Espacenet was used to conduct the survey, and the search strategy fields selected for the patent applications were: (i Priority Number: BR (Brazil, and (ii the International Patent Classification (IPC - C12N, C07K14, and C07H21/04. The patent applications by Brazilian residents, from 2000 to 2010 in the Espacenet for the classifications adopted indicates a total of 396 patent applications in the most representative sectors in biotechnology over the past 10 years. After the Brazilian Innovation Law there is a growth trend line particularly in the years 2007 and 2008. The universities hold 48% of the patent applications in biotechnology, following by Individuals/ Researchers with 20%, Public Research Centers and Private Firms with 15%, and 11% of the total, respectively.

  5. Therapeutic and cosmetic applications of mangiferin: a patent review.

    Science.gov (United States)

    Telang, Manasi; Dhulap, Sivakami; Mandhare, Anita; Hirwani, Rajkumar

    2013-12-01

    Mangiferin, a natural C-glucoside xanthone [2-C-β-D-glucopyranosyl-1, 3, 6, 7-tetrahydroxyxanthone], is abundantly present in young leaves and stem bark of the mango tree. The xanthonoid structure of mangiferin with C-glycosyl linkage and polyhydroxy components contributes to its free radical-scavenging ability, leading to a potent antioxidant effect as well as multiple biological activities. An extensive search was carried out to collect patent information on mangiferin and its derivatives using various patent databases spanning all priority years to date. The patents claiming therapeutic and cosmetic applications of mangiferin and its derivatives were analyzed in detail. The technology areas covered in this article include metabolic disorders, cosmeceuticals, multiple uses of the same compound, miscellaneous uses, infectious diseases, inflammation, cancer and autoimmune disorders, and neurological disorders. Mangiferin has the potential to modulate multiple molecular targets including nuclear factor-kappa B (NF-κB) signaling and cyclooxygenase-2 (COX-2) protein expression. Mangiferin exhibits antioxidant, antidiabetic, antihyperuricemic, antiviral, anticancer and antiinflammatory activities. The molecular structure of mangiferin fulfils the four Lipinski's requisites reported to favor high bioavailability by oral administration. There is no evidence of adverse side effects of mangiferin so far. Mangiferin could thus be a promising candidate for development of a multipotent drug.

  6. Resin-composite blocks for dental CAD/CAM applications.

    Science.gov (United States)

    Ruse, N D; Sadoun, M J

    2014-12-01

    Advances in digital impression technology and manufacturing processes have led to a dramatic paradigm shift in dentistry and to the widespread use of computer-aided design/computer-aided manufacturing (CAD/CAM) in the fabrication of indirect dental restorations. Research and development in materials suitable for CAD/CAM applications are currently the most active field in dental materials. Two classes of materials are used in the production of CAD/CAM restorations: glass-ceramics/ceramics and resin composites. While glass-ceramics/ceramics have overall superior mechanical and esthetic properties, resin-composite materials may offer significant advantages related to their machinability and intra-oral reparability. This review summarizes recent developments in resin-composite materials for CAD/CAM applications, focusing on both commercial and experimental materials. © International & American Associations for Dental Research.

  7. Diphonix trademark Resin: A review of its properties and applications

    International Nuclear Information System (INIS)

    Chiarizia, R.; Horwitz, E.P.; Alexandratos, S.D.

    1995-01-01

    The recently developed Diphonix trademark resin is a new multifunctional chelating ion exchange resin containing seminally substituted diphosphonic acid ligands chemically bonded to a styrene-based polymeric matrix. Diphonix can be regarded as a dual mechanism polymer, with a sulfonic acid cation exchange group allowing for rapid access, mostly non-specific, of ions into the polymeric network, and the diphosphonic acid group responsible for specificity (recognition) for a number of metal cations. The Diphonix resin exhibits an extraordinarily strong affinity for actinides, especially in the tetra- and hexavalent oxidation states. It has potential applications in TRU and mixed waste treatment and characterization, and in the development of new procedures for rapid actinide preconcentration and separation from environmental samples. Metal uptake studies have been extended to alkaline earth cations, to transition and post transition metal species, and to metal sorption from neutral or near neutral solutions. Also the kinetic behavior of the resin has been investigated in detail. Influence of the most commonly occurring matrix constituents (Na, Ca, Al, Fe, hydrofluoric, sulfuric, oxalic and phosphoric acids) on the uptake of actinide ions has been measured. This review paper summarizes the most important results studies on the Diphonix resin and gives an overview of the applications already in existence or under development in the fields of mixed waste treatment, actinide separation procedures, treatment of radwaste from nuclear power plants, and removal of iron from copper electrowinning solutions

  8. 37 CFR 1.31 - Applicant may be represented by one or more patent practitioners or joint inventors.

    Science.gov (United States)

    2010-07-01

    ... PATENT CASES National Processing Provisions Prosecution of Application and Appointment of Attorney Or Agent § 1.31 Applicant may be represented by one or more patent practitioners or joint inventors. An... by one or more patent practitioners or joint inventors. 1.31 Section 1.31 Patents, Trademarks, and...

  9. Application of nanohydrogels in drug delivery systems: recent patents review.

    Science.gov (United States)

    Dalwadi, Chintan; Patel, Gayatri

    2015-01-01

    Nanohydrogel combines the advantages of hydrogel and nano particulate systems. Similar to the hydrogel and macrogel, nanohydrogel can protect the drug and control drug release by stimuli responsive conformation or biodegradable bond into the polymer networks. Nanohydrogel has drawn huge interest due to their potential applications, such as carrier in target-specific controlled drug delivery, absorbents, chemical/biological sensors, and bio-mimetic materials. Similar to the nanoparticles, stimuli responsive nanohydrogel can easily be delivered in the liquid form for parenteral drug delivery application. This review highlights the methods to prepare nanohydrogel based on natural and synthetic polymers for diverse applications in drug delivery. It also encompasses the drug loading and drug release mechanism of the nanohydrogel formulation and patents related to the composition and chemical methods for preparation of nanohydrogel formulation with current status in clinical trials.

  10. Assessment of analytical techniques for characterization of crystalline clopidogrel forms in patent applications

    Directory of Open Access Journals (Sweden)

    Luiz Marcelo Lira

    2014-04-01

    Full Text Available The aim of this study was to evaluate two important aspects of patent applications of crystalline forms of drugs: (i the physicochemical characterization of the crystalline forms; and (ii the procedure for preparing crystals of the blockbuster drug clopidogrel. To this end, searches were conducted using online patent databases. The results showed that: (i the majority of patent applications for clopidogrel crystalline forms failed to comply with proposed Brazilian Patent Office guidelines. This was primarily due to insufficient number of analytical techniques evaluating the crystalline phase. In addition, some patent applications lacked assessment of chemical/crystallography purity; (ii use of more than two analytical techniques is important; and (iii the crystallization procedure for clopidogrel bisulfate form II were irreproducible based on the procedure given in the patent application.

  11. Silicone Resin Applications for Ceramic Precursors and Composites

    Directory of Open Access Journals (Sweden)

    Masaki Narisawa

    2010-06-01

    Full Text Available This article reviews the applications of silicone resins as ceramic precursors. The historical background of silicone synthesis chemistry is introduced to explain the production costs and supply availability of various silicones. Thermal degradation processes of silicones are classified in terms of the main chain structure and cyclic oligomer expulsion process, which determine the resulting ceramic yield and the chemical composition. The high temperature decomposition of Si-O-C beyond 1,400 °C in an inert atmosphere and formation of a protective silica layer on material surfaces beyond 1,200 °C in an oxidative atmosphere are discussed from the viewpoints of the wide chemical composition of the Si-O-C materials. Applications of the resins for binding agents, as starting materials for porous ceramics, matrix sources with impregnation, fiber spinning and ceramic adhesions are introduced. The recent development of the process of filler or cross-linking agent additions to resin compounds is also introduced. Such resin compounds are useful for obtaining thick coatings, MEMS parts and bulk ceramics, which are difficult to obtain by pyrolysis of simple organometallic precursors without additives.

  12. Application of ion exchange resin in floating drug delivery system.

    Science.gov (United States)

    Upadhye, Abhijeet A; Ambike, Anshuman A; Mahadik, Kakasaheb R; Paradkar, Anant

    2008-10-01

    The purpose of this study was to explore the application of low-density ion exchange resin (IER) Tulsion(R) 344, for floating drug delivery system (FDDS), and study the effect of its particle size on rate of complexation, water uptake, drug release, and in situ complex formation. Batch method was used for the preparation of complexes, which were characterized by physical methods. Tablet containing resin with high degree of crosslinking showed buoyancy lag time (BLT) of 5-8 min. Decreasing the particle size of resin showed decrease in water uptake and drug release, with no significant effect on the rate of complexation and in situ complex formation for both preformed complexes (PCs) and physical mixtures (PMs). Thus, low-density and high degree of crosslinking of resin and water uptake may be the governing factor for controlling the initial release of tablet containing PMs but not in situ complex formation. However, further sustained release may be due to in situ complex formation.

  13. Plant biotechnology patents: applications in agriculture and medicine.

    Science.gov (United States)

    Hefferon, Kathleen

    2010-06-01

    Recent advances in agricultural biotechnology have enabled the field of plant biology to move forward in great leaps and bounds. In particular, recent breakthroughs in molecular biology, plant genomics and crop science have brought about a paradigm shift of thought regarding the manner by which plants can be utilized both in agriculture and in medicine. Besides the more well known improvements in agronomic traits of crops such as disease resistance and drought tolerance, plants can now be associated with topics as diverse as biofuel production, phytoremediation, the improvement of nutritional qualities in edible plants, the identification of compounds for medicinal purposes in plants and the use of plants as therapeutic protein production platforms. This diversification of plant science has been accompanied by the great abundance of new patents issued in these fields and, as many of these inventions approach commercial realization, the subsequent increase in agriculturally-based industries. While this review chapter is written primarily for plant scientists who have great interest in the new directions being taken with respect to applications in agricultural biotechnology, those in other disciplines, such as medical researchers, environmental scientists and engineers, may find significant value in reading this article as well. The review attempts to provide an overview of the most recent patents issued for plant biotechnology with respect to both agriculture and medicine. The chapter concludes with the proposal that the combined driving forces of climate change, as well as the ever increasing needs for clean energy and food security will play a pivotal role in leading the direction for applied plant biotechnology research in the future.

  14. Exploration of Global Trend on Biomedical Application of Polyhydroxyalkanoate (PHA): A Patent Survey.

    Science.gov (United States)

    Ponnaiah, Paulraj; Vnoothenei, Nagiah; Chandramohan, Muruganandham; Thevarkattil, Mohamed Javad Pazhayakath

    2018-01-30

    Polyhydroxyalkanoates are bio-based, biodegradable naturally occurring polymers produced by a wide range of organisms, from bacteria to higher mammals. The properties and biocompatibility of PHA make it possible for a wide spectrum of applications. In this context, we analyze the potential applications of PHA in biomedical science by exploring the global trend through the patent survey. The survey suggests that PHA is an attractive candidate in such a way that their applications are widely distributed in the medical industry, drug delivery system, dental material, tissue engineering, packaging material as well as other useful products. In our present study, we explored patents associated with various biomedical applications of polyhydroxyalkanoates. Patent databases of European Patent Office, United States Patent and Trademark Office and World Intellectual Property Organization were mined. We developed an intensive exploration approach to eliminate overlapping patents and sort out significant patents. We demarcated the keywords and search criterions and established search patterns for the database request. We retrieved documents within the recent 6 years, 2010 to 2016 and sort out the collected data stepwise to gather the most appropriate documents in patent families for further scrutiny. By this approach, we retrieved 23,368 patent documents from all the three databases and the patent titles were further analyzed for the relevance of polyhydroxyalkanoates in biomedical applications. This ensued in the documentation of approximately 226 significant patents associated with biomedical applications of polyhydroxyalkanoates and the information was classified into six major groups. Polyhydroxyalkanoates has been patented in such a way that their applications are widely distributed in the medical industry, drug delivery system, dental material, tissue engineering, packaging material as well as other useful products. There are many avenues through which PHA & PHB could be

  15. Patent prosecution strategies for stem cell related applications.

    Science.gov (United States)

    Kumar, Rajeev; Yeh, Jenny J; Fernandez, Dennis; Hansen, Nels

    2007-09-01

    Stem cell research and the intellectual property derived from it, because of its potential to completely transform health care, demand an especially high level of consideration from business and patent prosecution perspectives. As with other revolutionary technologies, ordinary risks are amplified (e.g., litigation), and ordinarily irrelevant considerations may become important (e.g., heightened level of both domestic and foreign legislative risk). In the first part of this article, general strategies for patent prosecutors such as several prosecution considerations and methods for accelerating patent prosecution process are presented. In the second part, patent prosecution challenges of stem cell-related patents and possible solutions are discussed. In the final part, ethical and public policy issues particular to stem cell-related and other biotechnological inventions are summarized.

  16. 76 FR 70651 - Fee for Filing a Patent Application Other Than by the Electronic Filing System

    Science.gov (United States)

    2011-11-15

    ... government; or (3) preempt tribal law. Therefore, a tribal summary impact statement is not required under... 0651-AC64 Fee for Filing a Patent Application Other Than by the Electronic Filing System AGENCY: United..., that is not filed by electronic means as prescribed by the Director of the United States Patent and...

  17. Reviews on the Japanese Patent Applications Regarding Nickel/Metal Hydride Batteries

    Directory of Open Access Journals (Sweden)

    Taihei Ouchi

    2016-06-01

    Full Text Available The Japanese Patent Applications filed on the topic of nickel/metal hydride (Ni/MH batteries have been reviewed. Patent applications filed by the top nine battery manufacturers (Matsushita, Sanyo, Hitachi Maxell, Yuasa, Toshiba, FDK, Furukawa, Japan Storage, and Shin-kobe, five component suppliers (Tanaka, Mitsui, Santoku, Japan Metals & Chemicals Co. (JMC, and Shin-Etsu, and three research institutes (Industrial Research Institute (ISI, Agency of Industrial Science and Technology (AIST, and Toyota R & D were chosen as the main subjects for this review, based on their production volume and contribution to the field. By reviewing these patent applications, we can have a clear picture of the technology development in the Japanese battery industry. These patent applications also provide insights, know-how, and future directions for engineers and scientists working in the rechargeable battery field.

  18. Application of foresight methods in applications for patents and trademarks in Spain; Aplicacion de metodos de prevision en las solicitudes de patentes y marcas en Espana

    Energy Technology Data Exchange (ETDEWEB)

    Hidalgo Nuchera, A.; Glabaly Marquez, S.

    2011-07-01

    Patent and trademark offices which run according to principles of new management have an inherent need for dependable forecasting data in planning capacity and service levels. The predictive approach adopted for the time series of Spanish patents and trademarks applications (1979-2009) has been the use of different techniques of time series prediction in a short-term time horizon. The methods used can be grouped into two specifics areas: regression models of trends and time series models advanced. The results of this study show that it is possible to model the series of patents and trademarks applications with different models, especially ARIMA, with satisfactory model adjustment and relatively low error. (Author) 33 refs.

  19. Patentability of inventions under the Nigeria's patents and designs act

    African Journals Online (AJOL)

    Patentability of inventions under the Nigeria's patents and designs act: an examination. ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search · USING ... The Nigerian Patent Registry refuses patent applications for Software or ...

  20. A guide of patent map

    International Nuclear Information System (INIS)

    1999-12-01

    This book introduces application and characteristic of patent information, types of patent information data and research of patent information, arrangement of patent information and patent map, analysis of patent information, necessity, writing period arrangement way of patent map, cases of patent map on selection of task of research and development, system of research and development and application, examples of PM such as MAP by year, application, technique, Inventor, and claim point map and computerization like data arrangement of PM patent, collection of analysis range and item analysis of patent, cases and written reports on patent analysis.

  1. A Review on Recent Patents and Applications of Inorganic Material Binding Peptides.

    Science.gov (United States)

    Thota, Veeranjaneyulu; Perry, Carole C

    2017-01-01

    Although the popularity of using combinatorial display techniques for recognising unique peptides having high affinity for inorganic (nano) particles has grown rapidly, there are no systematic reviews showcasing current developments or patents on binding peptides specific to these materials. In this review, we summarize and discuss recent progress in patents on material binding peptides specifically exploring inorganic nano surfaces such as metals, metal oxides, minerals, carbonbased materials, polymer based materials, magnetic materials and semiconductors. We consider both the peptide display strategies used and the exploitation of the identified peptides in the generation of advanced nanomaterials. In order to get a clear picture on the number of patents and literature present to date relevant to inorganic material binding biomolecules and their applications, a thorough online search was conducted using national and worldwide databases. The literature search include standard bibliographic databases while patents included EPO Espacenet, WIPO patent scope, USPTO, Google patent search, Patent lens, etc. along with commercial databases such as Derwent and Patbase. Both English and American spellings were included in the searches. The initial number of patents found related to material binders were 981. After reading and excluding irrelevant patents such as organic binding peptides, works published before 2001, repeated patents, documents not in English etc., 51 highly relevant patents published from 2001 onwards were selected and analysed. These patents were further separated into six categories based on their target inorganic material and combinatorial library used. They include relevant patents on metal, metal oxide or combination binding peptides (19), magnetic and semiconductor binding peptides (8), carbon based (3), mineral (5), polymer (8) and other binders (9). Further, how these material specific binders have been used to synthesize simple to complex bio- or

  2. Spreadsheet Patents

    DEFF Research Database (Denmark)

    Borum, Holger Stadel; Kirkbro, Malthe Ettrup; Sestoft, Peter

    2018-01-01

    This technical report gives a list of US patents and patent applications related to spreadsheet implementation technology. It is intended as a companion to the monograph Spreadsheet Implementation Technology (Peter Sestoft, MIT Press 2014), and substantially extends and updates an appendix from...

  3. [Development strategy of Paris based on combination of domestic patent and current resource application and development].

    Science.gov (United States)

    Zhao, Fei-Ya; Tao, Ai-En; Xia, Cong-Long

    2018-01-01

    Paris is a commonly used traditional Chinese medicine (TCM), and has antitumor, antibacterial, sedative, analgesic and hemostatic effects. It has been used as an ingredient of 81 Chinese patent medicines, with a wide application and large market demand. Based on the data retrieved from state Intellectual Property Office patent database, a comprehensive analysis was made on Paris patents, so as to explore the current features of Paris patents in the aspects of domestic patent output, development trend, technology field distribution, time dimension, technology growth rate and patent applicant, and reveal the development trend of China's Paris industry. In addition, based on the current Paris resource application and development, a sustainable, multi-channel and multi-level industrial development approach was built. According to the results, studies of Paris in China are at the rapid development period, with a good development trend. However, because wild Paris resources tend to be exhausted, the studies for artificial cultivation technology should be strengthened to promote the industrial development. Copyright© by the Chinese Pharmaceutical Association.

  4. Nanotechnology patenting trends through an environmental lens: analysis of materials and applications

    International Nuclear Information System (INIS)

    Leitch, Megan E.; Casman, Elizabeth; Lowry, Gregory V.

    2012-01-01

    Many international groups study environmental health and safety (EHS) concerns surrounding the use of engineered nanomaterials (ENMs). These researchers frequently use the “Project on Emerging Nanotechnologies” (PEN) inventory of nano-enabled consumer products to prioritize types of ENMs to study because estimates of life-cycle ENM releases to the environment can be extrapolated from the database. An alternative “snapshot” of nanomaterials likely to enter commerce can be determined from the patent literature. The goal of this research was to provide an overview of nanotechnology intellectual property trends, complementary to the PEN consumer product database, to help identify potentially “risky” nanomaterials for study by the nano-EHS community. Ten years of nanotechnology patents were examined to determine the types of nano-functional materials being patented, the chemical compositions of the ENMs, and the products in which they are likely to appear. Patenting trends indicated different distributions of nano-enabled products and materials compared to the PEN database. Recent nanotechnology patenting is dominated by electrical and information technology applications rather than the hygienic and anti-fouling applications shown by PEN. There is an increasing emphasis on patenting of nano-scale layers, coatings, and other surface modifications rather than traditional nanoparticles, and there is widespread use of nano-functional semiconductor, ceramic, magnetic, and biological materials that are currently less studied by EHS professionals. These commonly patented products and the nano-functional materials they contain may warrant life-cycle evaluations to determine the potential for environmental exposure and toxicity. The patent and consumer product lists contribute different and complementary insights into the emerging nanotechnology industry and its potential for introducing nanomaterials into the environment.

  5. Nanotechnology patenting trends through an environmental lens: analysis of materials and applications

    Energy Technology Data Exchange (ETDEWEB)

    Leitch, Megan E. [Carnegie Mellon University, Department of Civil and Environmental Engineering, Center for the Environmental Implications of NanoTechnology (CEINT) (United States); Casman, Elizabeth [Carnegie Mellon University, Department of Engineering and Public Policy, Center for the Environmental Implications of NanoTechnology (CEINT) (United States); Lowry, Gregory V., E-mail: glowry@cmu.edu [Carnegie Mellon University, Department of Civil and Environmental Engineering, Center for the Environmental Implications of NanoTechnology (CEINT) (United States)

    2012-12-15

    Many international groups study environmental health and safety (EHS) concerns surrounding the use of engineered nanomaterials (ENMs). These researchers frequently use the 'Project on Emerging Nanotechnologies' (PEN) inventory of nano-enabled consumer products to prioritize types of ENMs to study because estimates of life-cycle ENM releases to the environment can be extrapolated from the database. An alternative 'snapshot' of nanomaterials likely to enter commerce can be determined from the patent literature. The goal of this research was to provide an overview of nanotechnology intellectual property trends, complementary to the PEN consumer product database, to help identify potentially 'risky' nanomaterials for study by the nano-EHS community. Ten years of nanotechnology patents were examined to determine the types of nano-functional materials being patented, the chemical compositions of the ENMs, and the products in which they are likely to appear. Patenting trends indicated different distributions of nano-enabled products and materials compared to the PEN database. Recent nanotechnology patenting is dominated by electrical and information technology applications rather than the hygienic and anti-fouling applications shown by PEN. There is an increasing emphasis on patenting of nano-scale layers, coatings, and other surface modifications rather than traditional nanoparticles, and there is widespread use of nano-functional semiconductor, ceramic, magnetic, and biological materials that are currently less studied by EHS professionals. These commonly patented products and the nano-functional materials they contain may warrant life-cycle evaluations to determine the potential for environmental exposure and toxicity. The patent and consumer product lists contribute different and complementary insights into the emerging nanotechnology industry and its potential for introducing nanomaterials into the environment.

  6. 40 CFR 63.5737 - How do I demonstrate compliance with the resin and gel coat application equipment cleaning...

    Science.gov (United States)

    2010-07-01

    ... the resin and gel coat application equipment cleaning standards? 63.5737 Section 63.5737 Protection of... Pollutants for Boat Manufacturing Standards for Resin and Gel Coat Application Equipment Cleaning Operations § 63.5737 How do I demonstrate compliance with the resin and gel coat application equipment cleaning...

  7. Surface roughness comparison of methacrylate and silorane-based composite resins after 40% hydrogen peroxide application

    Directory of Open Access Journals (Sweden)

    Rori Sasmita

    2018-01-01

    Full Text Available The change of the tooth colour could be restored with bleaching. The tooth bleaching will affects the surface roughness of the composite resins. Recently, the material basis for composite resins has developed, among others are methacrylate-based and silorane based composite resins. The objective of this study was to distinguish the surface roughness value of methacrylate-based composite resin and silorane based composite resins. This research was quasi-experimental. The sample used in this study were methacrylate and silorane based composite resins in discs form, with the size of 6 mm and the thickness of 3 mm, manufactured into 20 specimens and divided into 2 groups. The control group was immersed in the artificial saliva, and the treatment group was applied with 40% hydrogen peroxide. The result of the experiment analyzed using unpaired sample t-test showed significant differences in the average value of the surface roughness after the application of 40% hydrogen peroxide. The average value of methacrylate and silorane based composite resins were 2.744 μm and 3.417 μm, respectively. There was a difference in the surface roughness of methacrylate and silorane based composite resin compounds after the application of 40% hydrogen peroxide. The surface roughness value of the silorane-based composite resin was higher than the methacrylate-based.

  8. The Advanced Aluminum Nitride Synthesis Methods and Its Applications: Patent Review.

    Science.gov (United States)

    Shishkin, Roman A; Elagin, Andrey A; Mayorova, Ekaterina S; Beketov, Askold R

    2016-01-01

    High purity nanosized aluminum nitride synthesis is a current issue for both industry and science. However, there is no up-to-date review considering the major issues and the technical solutions for different methods. This review aims to investigate the advanced methods of aluminum nitride synthesis and its development tendencies. Also the aluminum nitride application patents and prospects for development of the branch have been considered. The patent search on "aluminum nitride synthesis" has been carried out. The research activity has been analyzed. Special attention has been paid to the patenting geography and the leading researchers in aluminum nitride synthesis. Aluminum nitride synthesis methods have been divided into 6 main groups, the most studied approaches are carbothermal reduction (88 patents) and direct nitridation (107 patents). The current issues for each group have been analyzed; the main trends are purification of the final product and nanopowder synthesis. The leading researchers in aluminum nitride synthesis have represented 5 countries, namely: Japan, China, Russia, South Korea and USA. The main aluminum nitride application spheres are electronics (59,1 percent of applications) and new materials manufacturing (30,9 percent). The review deals with the state of the art data in nanosized aluminum nitride synthesis, the major issues and the technical solutions for different synthesis methods. It gives a full understanding of the development tendencies and of the current leaders in the sphere.

  9. Invention note and patent note

    International Nuclear Information System (INIS)

    Chang, Sung Su

    1997-09-01

    This book deals with origin of invention and term related patent and invention, making idea, brain storming, 10 laws of invention skill, attitude of inventors, invention order, making good inventions, patent system, preparation of application, procedure and method of patent, management of patent, patent and trademark office, patent lawyer, copyright, new intellectual property right, industrial property right, trademark, invasion of industrial property right, patent, Judgment, preparation of items, application of industrial property right and effect of inventor and related people.

  10. Ontology-based content analysis of US patent applications from 2001-2010.

    Science.gov (United States)

    Weber, Lutz; Böhme, Timo; Irmer, Matthias

    2013-01-01

    Ontology-based semantic text analysis methods allow to automatically extract knowledge relationships and data from text documents. In this review, we have applied these technologies for the systematic analysis of pharmaceutical patents. Hierarchical concepts from the knowledge domains of chemical compounds, diseases and proteins were used to annotate full-text US patent applications that deal with pharmacological activities of chemical compounds and filed in the years 2001-2010. Compounds claimed in these applications have been classified into their respective compound classes to review the distribution of scaffold types or general compound classes such as natural products in a time-dependent manner. Similarly, the target proteins and claimed utility of the compounds have been classified and the most relevant were extracted. The method presented allows the discovery of the main areas of innovation as well as emerging fields of patenting activities - providing a broad statistical basis for competitor analysis and decision-making efforts.

  11. Manufacturing of a REBCO racetrack coil using thermoplastic resin aiming at Maglev application

    International Nuclear Information System (INIS)

    Mizuno, Katsutoshi; Ogata, Masafumi; Hasegawa, Hitoshi

    2015-01-01

    Highlights: • We propose a novel REBCO coil structure which applies thermoplastic resin. • The thermoplastic resin bonds the coil winding and cooling plates. • The adhesiveness of the resin is strong enough to withstand the thermal stress. • The thermoplastic resin does not cause the degradation because of its high viscosity. • We successfully made a full-scale racetrack REBCO coil with the thermoplastic resin. - Abstract: The REBCO coated conductor is a promising technology for the Maglev application in terms of its high critical temperature. The operating temperature of the on-board magnets can be around 40–50 K with the coated conductor. The REBCO coils are cooled by cryocoolers directly, and hence the thermal design of the REBCO coils significantly changes from that of LTS coils. We have developed a novel REBCO coil structure using thermoplastic resin. The coil is not impregnated and the thermoplastic resin is used to bond the coil winding and the heat transfer members, e.g. copper and aluminum plates. The viscosity of the thermoplastic resin is high enough for the thermoplastic resin not to permeate between the turns in the coil. Therefore, the thermal stress does not occur and the risk of degradation is removed. This paper contains the following three topics. First, the thermal resistance of the thermoplastic resin was measured at cryogenic temperature. Then, a small round REBCO coil was experimentally produced. It has been confirmed that the thermoplastic resin does not cause the degradation and, the adhesion between the coil winding and copper plates withstands the thermal stress. Finally, we successfully produced a full-scale racetrack REBCO coil applying the coil structure with the thermoplastic resin.

  12. Manufacturing of a REBCO racetrack coil using thermoplastic resin aiming at Maglev application

    Energy Technology Data Exchange (ETDEWEB)

    Mizuno, Katsutoshi, E-mail: mizuno.katsutoshi.14@rtri.or.jp; Ogata, Masafumi; Hasegawa, Hitoshi

    2015-11-15

    Highlights: • We propose a novel REBCO coil structure which applies thermoplastic resin. • The thermoplastic resin bonds the coil winding and cooling plates. • The adhesiveness of the resin is strong enough to withstand the thermal stress. • The thermoplastic resin does not cause the degradation because of its high viscosity. • We successfully made a full-scale racetrack REBCO coil with the thermoplastic resin. - Abstract: The REBCO coated conductor is a promising technology for the Maglev application in terms of its high critical temperature. The operating temperature of the on-board magnets can be around 40–50 K with the coated conductor. The REBCO coils are cooled by cryocoolers directly, and hence the thermal design of the REBCO coils significantly changes from that of LTS coils. We have developed a novel REBCO coil structure using thermoplastic resin. The coil is not impregnated and the thermoplastic resin is used to bond the coil winding and the heat transfer members, e.g. copper and aluminum plates. The viscosity of the thermoplastic resin is high enough for the thermoplastic resin not to permeate between the turns in the coil. Therefore, the thermal stress does not occur and the risk of degradation is removed. This paper contains the following three topics. First, the thermal resistance of the thermoplastic resin was measured at cryogenic temperature. Then, a small round REBCO coil was experimentally produced. It has been confirmed that the thermoplastic resin does not cause the degradation and, the adhesion between the coil winding and copper plates withstands the thermal stress. Finally, we successfully produced a full-scale racetrack REBCO coil applying the coil structure with the thermoplastic resin.

  13. 37 CFR 1.221 - Voluntary publication or republication of patent application publication.

    Science.gov (United States)

    2010-07-01

    ... filing system requirements and be accompanied by the publication fee set forth in § 1.18(d) and the..., the Office will not publish the application and will refund the publication fee. (b) The Office will... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Voluntary publication or...

  14. Urea-formaldehyde resins: production, application, and testing

    Science.gov (United States)

    Nuryawan, A.; Risnasari, I.; Sucipto, T.; Heri Iswanto, A.; Rosmala Dewi, R.

    2017-07-01

    Urea-formaldehyde (UF) resin, one of the most important formaldehyde resin adhesives, is a polymeric condensation product of formaldehyde with urea, and being widely used for the manufacture of wood-based composite panels, such as plywood, particleboard, and fiberboard. In spite of its benefits such as fast curing, good performance in the panels (colorless), and lower cost; formaldehyde emission (FE) originated from either UF resin itself or composite products bonded by UF resins is considered a critical drawback as it affects human health particularly in indoor environment. In order to reduce the FE, lowering formaldehyde/urea (F/U) mole ratio in the synthesis of the UF resin was done. In this study, synthesis of UF resins was carried out following the conventional alkaline-acid two-step reaction with a second addition of urea, resulting in F/U mole ratio around 1.0, namely 0.95; 1.05, and 1.15. The UF resins produced were used as binder for particleboard making. The board was manufactured in the laboratory using shaving type particle of Gmelina wood, 8% UF resin based on oven dry particle, and 1% NH4Cl (20%wt) as hardener for the resin. The target of the thickness was 10 mm and the dimension was 25 cm x 25 cm. The resulted particleboard then was evaluated the physical and the mechanical properties by Japanese Industrial Standard (JIS) A 5908 (2003). Further, the resulted particleboard also was used for the mice cage’s wall in order to mimic the real living environment. After four weeks exposure in the cages, the mice then were evaluated their mucous organs as well as their blood. The experiment results were as follows: 1) It was possible to synthesis UF resins with low F/U mole ratio; 2) However, the particleboard bonded UF resins with low F/U mole ratio showed poor properties, particularly on the thickness swelling and modulus of elasticity; 3) There was no significant differences among the mucous organs of the mice after a month exposure FE originated from

  15. Study and application on lean resin converting in uranium mill

    International Nuclear Information System (INIS)

    Zhao Shaoxi; Huang Qijin; Zhu Shuguang; Yi Faqing; Du Wenjie

    2012-01-01

    The field test about sulphuric acid used to convert lean resin was finished. The results indicated sulphuric acid could replace chlorin in lean resin and could be reclaimed to desorption procedure. The consumption of NaCl decreased, the chlorin concentration of tailing decreased too. Both of uranium loss and waste water volume were reduced. The uranium concentration of tailing decreased and energy saving and emission reduction can be achieved. (authors)

  16. The application of PLC automatic control system for resin transfer in pulsed elution

    International Nuclear Information System (INIS)

    Long Maoxiong

    2001-01-01

    An application of Programmable Logic Controller (PLC) in automatic control system for resin transfer in pulsed elution column is described. The design principle as well as hardware and software are also described in detail

  17. Innovation Trends in NAFTA Countries: An Econometric Analysis of Patent Applications

    Directory of Open Access Journals (Sweden)

    José Carlos Rodríguez

    2011-09-01

    Full Text Available This paper analyzes innovation trends in North America Free Trade Agreement (NAFTA countries by means of the number of patent applications during the period 1965 to 2008. Making use of patent data released by the World Intellectual Property Organization (WIPO and the Network for Science and Technology Indicators (Red Iberoamericana de Ciencia y Tecnología, RICYT, we search for presence of multiple structural changes in the patent applications series in Canada, Mexico, and the United States. Such changes may suggest that firms’ innovative activity has been modified in these countries (Mansfield, 1986. Accordingly, it would be expected that the new regulations implemented in these countries in the 1980s and 1990s have influenced their intellectual property regimes through the NAFTA and the Trade-Related Aspects of Intellectual Property Rights (TRIPS agreement. Consequently, the question conducting this research is how the new dispositions affecting intellectual regimes in NAFTA countries have affected innovation activities in these countries. The results achieved in this research confirm the existence of multiple structural changes in the series of patent applications resulting from the new legislation implemented in these countries.

  18. Preliminary study of application of Moringa oleifera resin as polymer electrolyte in DSSC solar cells

    Science.gov (United States)

    Saehana, Sahrul; Darsikin, Muslimin

    2016-04-01

    This study reports the preliminary study of application of Moringa oleifera resin as polymer electrolyte in dye-sensitized solar cell (DSSC). We found that polymer electrolyte membrane was formed by using solution casting methods. It is observed that polymer electrolyte was in elastic form and it is very potential to application as DSSC component. Performance of DSSC which employing Moringa oleifera resin was also observed and photovoltaic effect was found.

  19. Patent Assessment Quality

    DEFF Research Database (Denmark)

    Burke, Paul F.; Reitzig, Markus

    2006-01-01

    The increasing number of patent applications worldwide and the extension of patenting to the areas of software and business methods have triggered a debate on "patent quality". While patent quality may have various dimensions, this paper argues that consistency in the decision making on the side...... of the patent office is one important dimension, particularly in new patenting areas (emerging technologies). In order to understand whether patent offices appear capable of providing consistent assessments of a patent's technological quality in such novel industries from the beginning, we study the concordance...... of the European Patent Office's (EPO's) granting and opoposition decisions for individual patents. We use the historical example of biotech patens filed between 1978 until 1986, the early stage of the industry. Our results indicate that the EPO shows systematically different assessments of technological quality...

  20. Converting STEM Doctoral Dissertations into Patent Applications: A Study of Chemistry, Physics, Mathematics, and Chemical Engineering Dissertations from CIC Institutions

    Science.gov (United States)

    Butkovich, Nancy J.

    2015-01-01

    Doctoral candidates may request short-term embargoes on the release of their dissertations in order to apply for patents. This study examines how often inventions described in dissertations in chemical engineering, chemistry, physics, and mathematics are converted into U.S. patent applications, as well as the relationship between dissertation…

  1. Application of radioactive tracers in upgradation of industrial grade ion exchange resin (Amberlite IRA-400)

    International Nuclear Information System (INIS)

    Lokhande, R.S.; Singare, P.U.

    1998-01-01

    The exchange rates of ion exchange are determined by application of 131 I as a tracer isotope. The exchange study carried out in this investigation deals with understanding the effectiveness of ion exchange resin (in iodide form) Amberlite IRA-400 at different concentrations of potassium iodide solution (electrolyte) with temperature of solution varying from 27-48 degC by keeping amount of ion exchange resin constant (1.0 g). The exchange study is also carried out by varying amount of ion exchange resins, for fixed temperature (27.0 degC) and for fixed concentration of potassium iodide solution (0.005 M). (author)

  2. Study on the Application of Chinese Patent Drug and Chinese Formula of Rabdosia Rubescens

    Science.gov (United States)

    Peng, Mengfan; Liu, Baosong; Mao, Mingsan

    2018-01-01

    Rabdosia rubescens contais many active ingredients such as terpenoids, flavonoids, polysaccharides and organic acids. Modern research has proved that Rabdosia rubescens has the effect of heat-clearing and detoxicating, antibacterial and anticancer, promoting blood circulation to arrest pain and anti-tumor. It is used in the treatment of sore throat, rheumatoid arthritis and various kinds of cancer. The clinical application of Rabdosia rubescens is restricted in the fat-soluble components, and the solubility of water solubility is ignored. The application of prescriptions, Chinese patent drug and food therapy of Rabdosia rubescens are less and fragmented. This paper inquires relevant literature, the application of Rabdosia rubescens in prescription, Chinese patent medicine and food therapy was reviewed, in order to make Rabdosiae rubescens play a greater role in the relevant area. On the basis of make the best use of everything, to promote the innovation and development of Chinese medicine and services to the people in our country.

  3. The application of epoxy resin coating in grounding grid

    Science.gov (United States)

    Hu, Q.; Chen, Z. R.; Xi, L. J.; Wang, X. Y.; Wang, H. F.

    2018-01-01

    Epoxy resin anticorrosion coating is widely used in grounding grid corrosion protection because of its wide range of materials, good antiseptic effect and convenient processing. Based on the latest research progress, four kinds of epoxy anticorrosive coatings are introduced, which are structural modified epoxy coating, inorganic modified epoxy coating, organic modified epoxy coating and polyaniline / epoxy resin composite coating. In this paper, the current research progress of epoxy base coating is analyzed, and prospected the possible development direction of the anti-corrosion coating in the grounding grid, which provides a reference for coating corrosion prevention of grounding materials.

  4. Truth and falsity of patent

    International Nuclear Information System (INIS)

    Park, Gum Jin

    2006-10-01

    This book describes the process of the effect to build the business of patent strongly in difficult situation. The titles of this contents are finally, lawsuit if formed, the task of patent application introduction of tasks of patent negotiation, negotiation with Fujitsu, Mitsubishi, Oki and NEC, amalgamation between LG semiconductor and Hyundai Electronic Industry, life in incorporated company, current condition of application for a patent, the method to process strategy patent, how to make strong patent and effective negotiation strategy for a patent and strategy of patent application.

  5. Textile impregnation with thermoplastic resin - models and application

    NARCIS (Netherlands)

    Loendersloot, Richard; Grouve, Wouter Johannes Bernardus; Lamers, E.A.D.; Wijskamp, Sebastiaan; Kelly, P.A.; Bickerton, S.; Lescher, P.; Govignon, Q.

    2012-01-01

    One of the key issues of the development of cost-effective thermoplastic composites for the aerospace industry is the process quality control. A complete, void free impregnation of the textile reinforcement by the thermoplastic resin is an important measure of the quality of composites. The

  6. Manufacturing of a REBCO racetrack coil using thermoplastic resin aiming at Maglev application

    Science.gov (United States)

    Mizuno, Katsutoshi; Ogata, Masafumi; Hasegawa, Hitoshi

    2015-11-01

    The REBCO coated conductor is a promising technology for the Maglev application in terms of its high critical temperature. The operating temperature of the on-board magnets can be around 40-50 K with the coated conductor. The REBCO coils are cooled by cryocoolers directly, and hence the thermal design of the REBCO coils significantly changes from that of LTS coils. We have developed a novel REBCO coil structure using thermoplastic resin. The coil is not impregnated and the thermoplastic resin is used to bond the coil winding and the heat transfer members, e.g. copper and aluminum plates. The viscosity of the thermoplastic resin is high enough for the thermoplastic resin not to permeate between the turns in the coil. Therefore, the thermal stress does not occur and the risk of degradation is removed. This paper contains the following three topics. First, the thermal resistance of the thermoplastic resin was measured at cryogenic temperature. Then, a small round REBCO coil was experimentally produced. It has been confirmed that the thermoplastic resin does not cause the degradation and, the adhesion between the coil winding and copper plates withstands the thermal stress. Finally, we successfully produced a full-scale racetrack REBCO coil applying the coil structure with the thermoplastic resin.

  7. Technological Monitoring Applied to Survey-Based on Brazilian Patent Applications about PEMFC

    Directory of Open Access Journals (Sweden)

    Deysimar de Souza Carvalho

    2011-06-01

    Full Text Available The present study aims to show the importance of patents as an instrument of technological innovation and to assess the relevance of technology of PEMFC in Brazil by means of the technological monitoring methodology from 1996 to 2005. This study used different Industrial Property Databases (INPI-BR, ESPACENET and DWPI, in order to retrieve the BR applications in each database. Relevant keywords as “fuel cell” were used in combination with specific IPC (H01M8 in order to assess the main applicants, countries, IPCs and technological innovation over time. In Brazil, the country holding more requests in this area is the United States (US with 53,7% of the patent applications, while Brazil (BR accounts for 4,4% of the total requests. It was also observed that the North-American company, UTC Fuel Cells comes on top of the list and that there were no patent applications of Brazilian origin (BR in other countries.

  8. Advancing biotechnology with CRISPR/Cas9: recent applications and patent landscape

    DEFF Research Database (Denmark)

    Ferreira, Raphael; David, Florian; Nielsen, Jens

    2018-01-01

    for manipulating a broad range of living organisms. From the different elucidated types of CRISPR mechanisms, the type II system adapted from Streptococcus pyogenes has been the most exploited as a tool for genome engineering and gene regulation. In this review, we describe the different applications of CRISPR/Cas......9 technology in the industrial biotechnology field. Next, we detail the current status of the patent landscape, highlighting its exploitation through different companies, and conclude with future perspectives of this technology....

  9. Compatibility analysis of 3D printer resin for biological applications

    KAUST Repository

    Sivashankar, Shilpa

    2016-08-30

    The salient features of microfluidics such as reduced cost, handling small sample and reagent volumes and less time required to fabricate the devices has inspired the present work. The incompatibility of three-dimensional printer resins in their native form and the method to improve their compatibility to many biological processes via surface modification are reported. The compatibility of the material to build microfluidic devices was evaluated in three different ways: (i) determining if the ultraviolet (UV) cured resin inhibits the polymerase chain reaction (PCR), i.e. testing devices for PCR compatibility; (ii) observing agglutination complex formed on the surface of the UV cured resin when anti-C-reactive protein (CRP) antibodies and CRP proteins were allowed to agglutinate; and (iii) by culturing human embryonic kidney cell line cells and testing for its attachment and viability. It is shown that only a few among four in its native form could be used for fabrication of microchannels and that had the least effect on biological molecules that could be used for PCR and protein interactions and cells, whereas the others were used after treating the surface. Importance in building lab-on-chip/micrototal analysis systems and organ-on-chip devices is found.

  10. 40 CFR 63.5734 - What standards must I meet for resin and gel coat application equipment cleaning operations?

    Science.gov (United States)

    2010-07-01

    ... and gel coat application equipment cleaning operations? 63.5734 Section 63.5734 Protection of... Pollutants for Boat Manufacturing Standards for Resin and Gel Coat Application Equipment Cleaning Operations § 63.5734 What standards must I meet for resin and gel coat application equipment cleaning operations...

  11. International patent applications for non-injectable naloxone for opioid overdose reversal: Exploratory search and retrieve analysis of the PatentScope database.

    Science.gov (United States)

    McDonald, Rebecca; Danielsson Glende, Øyvind; Dale, Ola; Strang, John

    2018-02-01

    Non-injectable naloxone formulations are being developed for opioid overdose reversal, but only limited data have been published in the peer-reviewed domain. Through examination of a hitherto-unsearched database, we expand public knowledge of non-injectable formulations, tracing their development and novelty, with the aim to describe and compare their pharmacokinetic properties. (i) The PatentScope database of the World Intellectual Property Organization was searched for relevant English-language patent applications; (ii) Pharmacokinetic data were extracted, collated and analysed; (iii) PubMed was searched using Boolean search query '(nasal OR intranasal OR nose OR buccal OR sublingual) AND naloxone AND pharmacokinetics'. Five hundred and twenty-two PatentScope and 56 PubMed records were identified: three published international patent applications and five peer-reviewed papers were eligible. Pharmacokinetic data were available for intranasal, sublingual, and reference routes. Highly concentrated formulations (10-40 mg mL -1 ) had been developed and tested. Sublingual bioavailability was very low (1%; relative to intravenous). Non-concentrated intranasal spray (1 mg mL -1 ; 1 mL per nostril) had low bioavailability (11%). Concentrated intranasal formulations (≥10 mg mL -1 ) had bioavailability of 21-42% (relative to intravenous) and 26-57% (relative to intramuscular), with peak concentrations (dose-adjusted C max  = 0.8-1.7 ng mL -1 ) reached in 19-30 min (t max ). Exploratory analysis identified intranasal bioavailability as associated positively with dose and negatively with volume. We find consistent direction of development of intranasal sprays to high-concentration, low-volume formulations with bioavailability in the 20-60% range. These have potential to deliver a therapeutic dose in 0.1 mL volume. [McDonald R, Danielsson Glende Ø, Dale O, Strang J. International patent applications for non-injectable naloxone for opioid overdose reversal

  12. Modern evaluation of patents

    Science.gov (United States)

    Ignat, V.

    2016-08-01

    The number of patents is not so important as the market value. The market value is especially important for licensing of patents, make-or-buy decisions for technology procurement, corporate finance. Patents can be used as collateral for financing. Patents and credit approvals: without patents only 46% and with patents 54%. The value share of knowledge-based components to industrial products already reached 50% and it is still rising. OECD called these developments under the slogan "knowledge economy”. German Norm-DIN 77100 provides a working method for monetary evaluation of a patent. The value of a patent arises from its use. A patent can be used to protect or to earn licensing revenues. An evaluation expertise is required in areas, such as marketing, finance, R & D and strategic planning. As an indicator of the value of a patent is often used the number of citations. The number of a patent citation refers to its meaning and value. Other indicators would be: size of the patent family, validity of the patent, result of objections against patent application, number and quality of claims. The analysis of 9.000 patents resulted that only 7.2% worth over 10 million euro and 68% below 1 million euro. The cost method: it is considered the cost that would be incurred for the development and patenting of a similar invention. The market method: are used the prices that have been achieved in comparable with recently transactions. The Income method: the potential reward is measured, which can arise from a patent. The evaluation will be in the following areas: legal status, technology, market conditions, finance and strategy. Each question relates to a different parameter of a value.

  13. Characterization of solid UV curable 3D printer resins for biological applications

    KAUST Repository

    Sivashankar, Shilpa

    2016-12-19

    In this paper, we report a simple method to evaluate biocompatibility of solid UV cross-linked resin as a material for microfluidic devices that can be used for biological applications. We evaluated the biocompatibility of the material in two different ways (1) determining if the UV cured resin inhibits the polymerase chain reaction (PCR) and (2) observing agglutination complex formed on the surface of the UV cured resin when anti-CRP antibodies and C- reactive protein (CRP) proteins were allowed to agglutinate. Six different types of 3D printer resins were compared to test the biocompatibility. The study showed that only few among them could be used for fabrication of micro channels and that had least effect on biological molecules that could be used for PCR and protein interactions. Through these studies it is possible to estimate the curing time of various resin and their type of interaction with biomolecules. This study finds importance in on-chip tissue engineering and organ-on-chip applications.

  14. DOE Patents Available for Licensing

    International Nuclear Information System (INIS)

    Stuber, C.

    1981-01-01

    DOE Patents Available for Licensing (DOE PAL) provides abstracting and indexing coverage of the DOE patent literature, including patent applications, that concerns any apsect of energy production, conservation, and utilization. The citations are arranged by subject category. DOE is prepared to grant exclusive or nonexclusive, revocable licenses under DOE-owned US patents and patent applications in accordance with the provisions of 10CFR781

  15. Modification of polysaccharides: Pharmaceutical and tissue engineering applications with commercial utility (patents)

    Energy Technology Data Exchange (ETDEWEB)

    Malviya, Rishabha, E-mail: rishabhamalviya19@gmail.com [Polymer Science Laboratory, Department of Pharmacy, School of Medical & Allied Sciences, Galgotias University, Greator Noida, UP (India); Department of Pharmacy, Uttarkhand Technical University, Dehradun, Uttarkhand (India); Sharma, Pramod Kumar [Polymer Science Laboratory, Department of Pharmacy, School of Medical & Allied Sciences, Galgotias University, Greator Noida, UP (India); Dubey, Susheel Kumar [Siddarth Institute of Pharmacy, Dehradun, Uttarkhand (India)

    2016-11-01

    Polymer modifications open new era for the development of polymers with requisite properties. Use of modified polymers is practically boundless. Different studies focus on biomedical applications of chemically modified polysaccharides. Development and utilization of modified polysaccharides get attention to be used as carrier for pharmaceutical drug delivery as well as tissue engineering scaffolds. Grafted polymer shows better cellular regeneration, signal transmission, diagnostic and imaging material than putative form. This review article aims to discuss various approaches to modify naturally derived polymer and their applications as pharmaceutical drug carrier and as a material for wound dressing and artificial cartilage due to better biophysical cues. Manuscript included various patents based on the applications of modified polymers and techniques used to modify polymers. - Highlights: • Properties of natural polysaccharides can be modulated by modification in their basic backbone. • Polysaccharides can be easily modified using microwave irradiation as compared to conventional closed vessel modification. • Biodegradable and biocompatible nature of modified polymer promotes their use in targeted cellular delivery of pharmaceuticals. • Studies show strong support that biodegradable polymers have ability to modulate cell signaling, cellular attachment, migration, proliferation and differentiation. • Manuscript reveals the fact that various commercial patents have been granted for the use of modified polymer.

  16. Searching bioremediation patents through Cooperative Patent Classification (CPC).

    Science.gov (United States)

    Prasad, Rajendra

    2016-03-01

    Patent classification systems have traditionally evolved independently at each patent jurisdiction to classify patents handled by their examiners to be able to search previous patents while dealing with new patent applications. As patent databases maintained by them went online for free access to public as also for global search of prior art by examiners, the need arose for a common platform and uniform structure of patent databases. The diversity of different classification, however, posed problems of integrating and searching relevant patents across patent jurisdictions. To address this problem of comparability of data from different sources and searching patents, WIPO in the recent past developed what is known as International Patent Classification (IPC) system which most countries readily adopted to code their patents with IPC codes along with their own codes. The Cooperative Patent Classification (CPC) is the latest patent classification system based on IPC/European Classification (ECLA) system, developed by the European Patent Office (EPO) and the United States Patent and Trademark Office (USPTO) which is likely to become a global standard. This paper discusses this new classification system with reference to patents on bioremediation.

  17. Recyclable epoxy resins: An example of green approach for advanced composite applications

    Science.gov (United States)

    Cicala, Gianluca; Rosa, Daniela La; Musarra, Marco; Saccullo, Giuseppe; Banatao, Rey; Pastine, Stefan

    2016-05-01

    Automotive composite applications are increasingly growing due to demand for lightweight structures to comply to the requirements for fuel reduction. HP-RTM is gaining relevance as one of the preferred production technologies for high volume applications. The BMW i3 life module being a notable example of HP-RTM application. The key aspects of HP-RTM are the short injection times (i.e. less than 1min) and the fast curing of the thermoset resins (i.e. less than 10min). The choice of using thermosets poses relevant issues for their limited recycling options. The standard recycling solution is the incineration but, this solution poses some concerns in terms of global environmental impact. Novel solutions are presented in this work based on the use of recyclable epoxy systems. In our work the results of experimentation carried out by our group with cleavable ammines by Connora Technologies and bioepoxy resins by Entropy Resins will be discussed. The multiple uses of recycled matrices obtained treating the recyclable epoxy resins are discussed in the framework of a "cradle" to "crave" approach. Finally, Life Cycle Assessment (LCA) is used to evaluate the environmental benefits of the proposed approach.

  18. Used, Blocking and Sleeping Patents

    DEFF Research Database (Denmark)

    Torrisi, Salvatore; Gambardella, Alfonso; Giuri, Paola

    2016-01-01

    This paper employs data from a large-scale survey (InnoS&T) of inventors in Europe, the USA, and Japan who were listed in patent applications filed at the European Patent Office with priority years between 2003 and 2005. We provide evidence regarding the reasons for patenting and the ways in which...... patents are being utilized. A substantial share of patents is neither used internally nor for market transactions, which confirms the importance of strategic patenting and inefficiency in the management of intellectual property. We investigate different types of unused patents—unused blocking patents...... and sleeping patents. We also examine the association between used and unused patents and their characteristics such as family size, scope, generality and overlapping claims, technology area, type of applicant, and the competitive environment from where these patents originate. We discuss our results...

  19. Modification of polysaccharides: Pharmaceutical and tissue engineering applications with commercial utility (patents).

    Science.gov (United States)

    Malviya, Rishabha; Sharma, Pramod Kumar; Dubey, Susheel Kumar

    2016-11-01

    Polymer modifications open new era for the development of polymers with requisite properties. Use of modified polymers is practically boundless. Different studies focus on biomedical applications of chemically modified polysaccharides. Development and utilization of modified polysaccharides get attention to be used as carrier for pharmaceutical drug delivery as well as tissue engineering scaffolds. Grafted polymer shows better cellular regeneration, signal transmission, diagnostic and imaging material than putative form. This review article aims to discuss various approaches to modify naturally derived polymer and their applications as pharmaceutical drug carrier and as a material for wound dressing and artificial cartilage due to better biophysical cues. Manuscript included various patents based on the applications of modified polymers and techniques used to modify polymers. Copyright © 2016 Elsevier B.V. All rights reserved.

  20. Analysis on the Application and Characteristics of Chinese Patent Medicines Containing Dried Rehmanniae Radix

    Science.gov (United States)

    Guo, Hui; Miao, Yanyan; Miao, mingsan

    2018-01-01

    Dried Rehmanniae Radix has sweet taste, and its drug property is cold.It acts on heart, liver and kidney.It has the effect of clearing heat and cooling blood, nourishing yin and promoting fluid production.The active constituents of dried Rehmanniae Radix are mainly iridoid glycosides, polysaccharides, oligosaccharides and so on.This article sorted and analyzed the application forms, efficacy, applicable symptomsh and the frequency of the use of single traditional Chinese medicine in the Chinese patent medicines containing dried Rehmanniae Radix in the Chinese Pharmacopoeia of 2015. This method provides a train of thought for the further study of the pharmacological constituents of dried Rehmanniae Radix, and supplements the pharmacodynamics of Chinese herbal medicine of dried Rehmanniae Radix. It also provides ideas for the improvement of dried Rehmanniae Radix prescription and the new usage of its old prescription.

  1. Advancing biotechnology with CRISPR/Cas9: recent applications and patent landscape.

    Science.gov (United States)

    Ferreira, Raphael; David, Florian; Nielsen, Jens

    2018-01-24

    Clustered regularly interspaced short palindromic repeats (CRISPR) is poised to become one of the key scientific discoveries of the twenty-first century. Originating from prokaryotic and archaeal immune systems to counter phage invasions, CRISPR-based applications have been tailored for manipulating a broad range of living organisms. From the different elucidated types of CRISPR mechanisms, the type II system adapted from Streptococcus pyogenes has been the most exploited as a tool for genome engineering and gene regulation. In this review, we describe the different applications of CRISPR/Cas9 technology in the industrial biotechnology field. Next, we detail the current status of the patent landscape, highlighting its exploitation through different companies, and conclude with future perspectives of this technology.

  2. New ion exchange resin designs and regeneration procedures yield improved performance for various condensate polishing applications

    International Nuclear Information System (INIS)

    Najmy, S.W.

    2002-01-01

    Condensate polishing is an application with many different design and operational aspects. The past decade has brought new challenges for improved water quality with respect to both soluble and insoluble contaminants. Nonetheless, the endeavors to understand the compositional complexities of the ion exchange resin bead and the convoluted dynamics of ion exchange chemistry and chemical engineering mechanisms occurring within the mixed bed condensate polisher have brought new ideas and expectations for ion exchange resin in deep-bed condensate polishers than ever before. The new products and procedures presented here are a collaboration of a great deal of effort on the part of researchers, consultants, system engineers, station chemists, lab technicians and others. The studies discussed in this paper unequivocally demonstrate the merits of: 1. A specially designed cation resin to achieve greater than 95% insoluble iron removal efficiency, 2. A less-separable mixed resin for improved control of reactor water sulfate in BWR primary cycles, 3. Applying increased levels of regeneration chemicals and retrofitting the service vessels with re-mixing capability to improve the operation of deep-bed condensate polishers in PWR secondary cycles. (authors)

  3. The effect of ultrafast fiber laser application on the bond strength of resin cement to titanium.

    Science.gov (United States)

    Ates, Sabit Melih; Korkmaz, Fatih Mehmet; Caglar, Ipek Satıroglu; Duymus, Zeynep Yeşil; Turgut, Sedanur; Bagis, Elif Arslan

    2017-07-01

    The purpose of this study was to investigate the effect of ultrafast fiber laser treatment on the bond strength between titanium and resin cement. A total of 60 pure titanium discs (15 mm × 2 mm) were divided into six test groups (n = 10) according to the surface treatment used: group (1) control, machining; group (2) grinding with a diamond bur; group (3) ultrafast fiber laser application; group (4) resorbable blast media (RBM) application; group (5) electro-erosion with copper; and group (6) sandblasting. After surface treatments, resin cements were applied to the treated titanium surfaces. Shear bond strength testing of the samples was performed with a universal testing machine after storing in distilled water at 37 °C for 24 h. One-way ANOVA and Tukey's HSD post hoc test were used to analyse the data (P < 0.05). The highest bond strength values were observed in the laser application group, while the lowest values were observed in the grinding group. Sandblasting and laser application resulted in significantly higher bond strengths than control treatment (P < 0.05). Ultrafast fiber laser treatment and sandblasting may improve the bond strength between resin cement and titanium.

  4. Eichrom's ABEC trademark resins: Alkaline radioactive waste treatment, radiopharmaceutical, and potential hydrometallurgical applications

    International Nuclear Information System (INIS)

    Bond, A.H.; Gula, M.J.; Chang, F.; Rogers, R.D.

    1997-01-01

    Eichrom's ABEC trademark resins selectivity extract certain anions from high ionic strength acidic, neutral, or strongly alkaline media, and solute stripping can be accomplished by eluting with water. ABEC resins are stable to pH extreme and radiolysis and operate in high ionic strength and/or alkaline solutions where anion-exchange is often ineffective. Potential applications of the ABEC materials include heavy metal and ReO 4 - separations in hydrometallurgy and purification of perrhenate iodide, and iodate in radiopharmaceutical production. Separation of 99m TcO 4 - from its 99 MoO 4 2- parent and stripping with water or physiological saline solution have been demonstrated for radiopharmaceutical applications. Removal of 99 TcO 4 - and 129 I - from alkaline tank wastes has also been successfully demonstrated. The authors will discuss the scale-up studies, process-scale testing, and market development of this new extraction material

  5. Scientific production and technological production: transforming a scientific paper into patent applications.

    Science.gov (United States)

    Dias, Cleber Gustavo; Almeida, Roberto Barbosa de

    2013-01-01

    Brazil has been presenting in the last years a scientific production well-recognized in the international scenario, in several areas of knowledge, according to the impact of their publications in important events and especially in indexed journals of wide circulation. On the other hand, the country does not seem to be in the same direction regarding to the technological production and wealth creation from the established scientific development, and particularly from the applied research. The present paper covers such issue and discloses the main similarities and differences between a scientific paper and a patent application, in order to contribute to a better understanding of both types of documents and help the researchers to chose and select the results with technological potential, decide what is appropriated for industrial protection, as well as foster new business opportunities for each technology which has been created.

  6. Application of Bibliographic Coupling versus Cited Titles Words in Patent Fuzzy Clustering

    Directory of Open Access Journals (Sweden)

    Anahita Kermani

    2013-03-01

    Full Text Available Attribute selection is one of the steps before patent clustering. Various attributes can be used for clustering. In this study, the effect of using citation and citation title words, respectively, in form of bibliographic coupling and citation title words sharing, were measured and compared with each other, as patent attributes. This study was done in an experimental method, on a collection of 717 US Patent cited in the patents belong to 977/774 subclass of US Patent Classification. Fuzzy C-means was used for patent clustering and extended BCubed precision and extended BCubed recall were used as evaluation measure. The results showed that the clustering produced by bibliographic coupling had better performance than clustering used citation title words and existence of cluster structure were in a wider range of exhaustivity than citation title words.

  7. Strategies for stem cell patent applications in the light of recent court cases.

    Science.gov (United States)

    Eyre, David E; Schlich, George W

    2015-01-01

    Stem cells offer the prospect of treatments for diseases and injuries that are currently beyond medical science. Although development of these potential medical marvels has been dogged by their controversial origin, technological developments and guidance from recent judicial decisions have answered and overcome many of these difficulties. In particular, the European Patent Office, United States Patent and Trademark Office, Japan Patent Office and State Intellectual Property Office of China have published guidelines covering patenting of stem cell technologies in the light of recent decisions. We now see a patent landscape where stem cell technologies and related therapies can, with very few exceptions, be protected via patents, provided the appropriate form of claim wording is used.

  8. Gender diversity, R&D teams and patents: An application to Spanish firms

    OpenAIRE

    Segarra Blasco, Agustí, 1958-; Teruel, Mercedes

    2018-01-01

    Previous results show that gender diversity increases the probability that firms invest in R&D and engage in innovation. This paper explores the relationship between gender diversity of R&D departments and their capacity to patent. Based on the Spanish Community Innovation Survey between 2004 and 2014, we apply a two-step procedure in order to control for endogeneity. Although gender diversity affects OEPM patents negatively, its impact is non-significant for patents with international covera...

  9. Temporary balloon occlusion of the common hepatic artery for administration of yttrium-90 resin microspheres in a patient with patent hepatoenteric collaterals.

    Science.gov (United States)

    Mahvash, Armeen; Zaer, Navid; Shaw, Colette; Chasen, Beth; Avritscher, Rony; Murthy, Ravi

    2012-02-01

    The most common serious complication of yttrium-90 ((90)Y) therapy is gastrointestinal ulceration caused by extrahepatic microsphere dispersion. The authors describe the use of a balloon catheter for temporary occlusion of the common hepatic artery to reverse hepatoenteric flow for lobar administration of resin microspheres when coil embolization of a retroportal artery was impossible. At 9 months after treatment, the patient had no gastrointestinal side effects and showed a partial response. Copyright © 2012 SIR. Published by Elsevier Inc. All rights reserved.

  10. The clinical application and effect evaluation of home-made duct occluder in patent ductus arteriosus

    Energy Technology Data Exchange (ETDEWEB)

    Jijun, Shi; Guohong, Zeng; Zhiwei, Zhang; Huishen, Wang; Mingyang, Qian; Yufen, Li [Guangdong Provincial People' s Hospital, Guangdong Provincial Cardiovascular Inst., Guangzhou (China)

    2003-08-01

    Objective: To evaluate the clinical application and effect of transcatheter closure of patent ductus arteriosus (PDA) by using the home-made Xinjian duct occluder. Methods: From June, 2000 to July, 2002, 182 patients (63 male, 119 female) underwent attempted transcatheter closure of patent ductus arteriosus by using the Xinjian duct occluder at a median age of 5.23 years (range 0.3 to 16) and a median weight of 17.09 kg (range 5 to 50). The mean PDA diameter in the narrowest segment was 4.30 mm (range 1.32 to 9.00). The delivery sheath was 6 to 10 F. The median operation time was 73.31 min (range 45 to 135), and the median fluoroscopy time was 7.09 min (range 2.60 to 26.90). Follow-up evaluation was performed with color flow mapping immediately, at 24 h, 1 month, 3 months, 6 months, 1 year, and 2 years after closure, respectively. Results: The Xinjian device was successfully placed in all 182 cases. Angiography showed immediate closure in 109 patients (59.89%), small residual shunt in 30, and trace shunt in 43. At 24 h, color Doppler revealed complete closure in 163 patients. Only 8 patients still had a residual shunt after 1 month. A residual shunt was observed in 4 at 3 months and 6 months, 2 at 1 year, 1 at 2 years. There were no severe complications. Conclusions: Transcatheter closure of PDA using the home-made Xinjian occluder is a safe and effective method. The Xinjian occluder could replace the imported product in the closure of PDA.

  11. The clinical application and effect evaluation of home-made duct occluder in patent ductus arteriosus

    International Nuclear Information System (INIS)

    Shi Jijun; Zeng Guohong; Zhang Zhiwei; Wang Huishen; Qian Mingyang; Li Yufen

    2003-01-01

    Objective: To evaluate the clinical application and effect of transcatheter closure of patent ductus arteriosus (PDA) by using the home-made Xinjian duct occluder. Methods: From June, 2000 to July, 2002, 182 patients (63 male, 119 female) underwent attempted transcatheter closure of patent ductus arteriosus by using the Xinjian duct occluder at a median age of 5.23 years (range 0.3 to 16) and a median weight of 17.09 kg (range 5 to 50). The mean PDA diameter in the narrowest segment was 4.30 mm (range 1.32 to 9.00). The delivery sheath was 6 to 10 F. The median operation time was 73.31 min (range 45 to 135), and the median fluoroscopy time was 7.09 min (range 2.60 to 26.90). Follow-up evaluation was performed with color flow mapping immediately, at 24 h, 1 month, 3 months, 6 months, 1 year, and 2 years after closure, respectively. Results: The Xinjian device was successfully placed in all 182 cases. Angiography showed immediate closure in 109 patients (59.89%), small residual shunt in 30, and trace shunt in 43. At 24 h, color Doppler revealed complete closure in 163 patients. Only 8 patients still had a residual shunt after 1 month. A residual shunt was observed in 4 at 3 months and 6 months, 2 at 1 year, 1 at 2 years. There were no severe complications. Conclusions: Transcatheter closure of PDA using the home-made Xinjian occluder is a safe and effective method. The Xinjian occluder could replace the imported product in the closure of PDA

  12. Impairment of resin cement application on the bond strength of indirect composite restorations

    Directory of Open Access Journals (Sweden)

    Jovito Adiel SKUPIEN

    2015-01-01

    Full Text Available The aims of this study were to evaluate the effect of immediate and delayed resin cement application on the microtensile bond strength of indirect composite resin restorations and, to evaluate adhesive strategies (for regular resin cement or humidity parameters for self-adhesive resin cement. Forty-five enamel/dentin discs (0.5 mm height and 10 mm of diameter obtained from bovine teeth were divided into nine groups (n = 5. For regular cement, the variation factors were cementation technique at three levels (immediate cementation, 5 or 30 min after adhesive system application; and type of adhesive system at two levels (three- or two-step. For self-adhesive cement, the dentin moisture was the source of variation at three levels (normal, dry, or wet cementation. The specimens were submitted to microtensile bond strength (μTBS testing using a universal testing machine. Data were analyzed by ANOVA, Tukey’s test, and linear regression. Regular cement and three-step etch-and-rinse adhesive system showed the highest values of bond strength (25.21 MPa–30 min of delay. Only for this condition, three-step adhesive showed higher bond strength than the two-step adhesive. Nevertheless, the linear regression showed that irrespective of the strategy, the use of the two-step approach when compared with three-step adhesive system decreased μTBS (p < 0.001. The failure analysis showed predominant adhesive failures for all tested groups. All groups had comparable values of bond strength to bovine dentin when the same materials were used, even in suboptimal clinical conditions.

  13. Can this kind of idea be a patent?

    International Nuclear Information System (INIS)

    Yu, Jae Bok

    2004-08-01

    This book mentions patent such as application, what is patents, patent law, procedure and patent attorney, which includes business idea is patent. Is internet domain name or name-brand? We can make a big money with others idea, the difference among patent, trademark, utility model rights and registration of design, priority system, new weapon in digital period, patent is a knife and a shield, the cost from application to registration, what is hunting of patent information, writing document for patent, patent examination and patent lawyer.

  14. Can this kind of idea be a patent?

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Jae Bok

    2004-08-15

    This book mentions patent such as application, what is patents, patent law, procedure and patent attorney, which includes business idea is patent. Is internet domain name or name-brand? We can make a big money with others idea, the difference among patent, trademark, utility model rights and registration of design, priority system, new weapon in digital period, patent is a knife and a shield, the cost from application to registration, what is hunting of patent information, writing document for patent, patent examination and patent lawyer.

  15. Google Patents: The global patent search engine

    OpenAIRE

    Noruzi, Alireza; Abdekhoda, Mohammadhiwa

    2014-01-01

    Google Patents (www.google.com/patents) includes over 8 million full-text patents. Google Patents works in the same way as the Google search engine. Google Patents is the global patent search engine that lets users search through patents from the USPTO (United States Patent and Trademark Office), EPO (European Patent Office), etc. This study begins with an overview of how to use Google Patent and identifies advanced search techniques not well-documented by Google Patent. It makes several sug...

  16. Patents and nanomedicine.

    Science.gov (United States)

    Bawa, Raj

    2007-06-01

    Big pharma's business model, which relies on a few blockbusters to generate profits, is clearly broken. Patent expiration on numerous blockbusters in recent years is already altering the drug landscape. Drug companies are also facing other challenges that necessitate development and implementation of novel R&D strategies, including those that focus on nanotechnology and miniaturization. Clearly, there is enormous excitement and expectation regarding nanomedicine's potential impact. However, securing valid and defensible patent protection will be critical. Although early forecasts for nanomedicine commercialization are encouraging, there are numerous bottlenecks as well. One of the major hurdles is an emerging thicket of patent claims, resulting primarily from patent proliferation as well as continued issuance of surprisingly broad patents by the US Patent and Trademark Office (PTO). Adding to this confusion is the fact that the US National Nanotechnology Initiative's widely cited definition of nanotechnology is inaccurate and irrelevant from a nanomedicine perspective. It is also the cause of the inadequate patent classification system that was recently unveiled by the PTO. All of this is creating a chaotic, tangled patent landscape in various sectors of nanomedicine where the competing players are unsure of the validity and enforceability of numerous issued patents. If this trend continues, it could stifle competition and limit access to some inventions. Therefore, reforms are urgently needed at the PTO to address problems ranging from poor patent quality and questionable examination practices to inadequate search capabilities, rising attrition, poor employee morale and a skyrocketing patent application backlog. Only a robust patent system will stimulate the development of commercially viable nanomedicine products that can drastically improve a patient's quality of life and reduce healthcare costs.

  17. Micro-shear bond strength of resin cement to dentin after application of desensitizing toothpastes.

    Science.gov (United States)

    Bavbek, Andac Barkin; Goktas, Baris; Cekic-Nagas, Isil; Egilmez, Ferhan; Ergun, Gulfem; Eskitascioglu, Gurcan

    2013-01-01

    The aim of the study was to evaluate the effect of three desensitizing toothpastes on bonding of resin cements to dentin. The occlusal surfaces of 72 maxillary third molars were ground to obtain flat dentin surfaces and then divided into three groups according to three desensitizing toothpastes used: Sensodyne Rapid Relief (GlaxoSmithKline, SmithKline Beecham Ltd., Slough, UK), Signal Sensitive Expert (Unilever Sanayi ve Ticaret Türk A.Ş., Ümraniye, İstanbul, Turkey) and Colgate Sensitive Pro-Relief (Colgate Palmolive, New York, NY). Following bonding of the resin cement (Clearfil™ SA Cement, Kuraray Co, Osaka, Japan) to dentin, the specimens were light cured for 40 s with a LED (Elipar S10, 3M Espe, St. Paul, MN). The strength measurements were accomplished with a micro-shear testing machine (Bisco, Schaumburg, IL) at a cross-head speed of 0.5 mm/min until the failure occurs. Failure modes were examined using a stereomicroscope and scanning electron microscope. The data were analyzed with one-way analysis of variance (ANOVA) and Tukey HSD test (α = 0.05). ANOVA revealed that the application of desensitizing toothpastes had significant effects on bond strength of the resin cement tested to dentin (p < 0.05). Mixed failures were observed in all of the groups. The use of a desensitizing toothpaste before cementation might alter the bond strength of adhesively luted restorations.

  18. 76 FR 72000 - Patent, Trademark & Copyright Acts

    Science.gov (United States)

    2011-11-21

    ... DEPARTMENT OF THE INTERIOR Geological Survey Patent, Trademark & Copyright Acts AGENCY: U.S... Consultants, 1255 Roberts Boulevard NW., Suite 200, Kennesaw, GA 30144, on U.S. Patent Application Serial No. 12/133,666, and a divisional patent application to be filed shortly at the Patent and Trademark...

  19. The process of filing patent applications in the view of ICT inventors

    Energy Technology Data Exchange (ETDEWEB)

    Gimenes, Celso Huerta; Politano, Rodolfo; Andrade, Delvonei Alves de, E-mail: cgimenes@Ipen.br, E-mail: politano@ipen.br, E-mail: delvonei@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    This article analyzed the patent files of the National Commission of Nuclear Energy, CNEN, at the National Institute of Industrial Property - INPI (U.S. Intellectual Property Commission - CIPC). The following institutions were considered: the Institute for Energy and Nuclear Research - IPEN and the Nuclear Technology Development Center. The process of patent requests, under the view of ICT inventors, was verified. From these results, an increase in the register requests was found, with a stable number of inventors. Hence, it is worth highlighting the necessity to strengthen the dissemination of the legislation, as well as to show the advantages the Inventor would have by presenting a curriculum with many patents. (author)

  20. The process of filing patent applications in the view of ICT inventors

    International Nuclear Information System (INIS)

    Gimenes, Celso Huerta; Politano, Rodolfo; Andrade, Delvonei Alves de

    2013-01-01

    This article analyzed the patent files of the National Commission of Nuclear Energy, CNEN, at the National Institute of Industrial Property - INPI (U.S. Intellectual Property Commission - CIPC). The following institutions were considered: the Institute for Energy and Nuclear Research - IPEN and the Nuclear Technology Development Center. The process of patent requests, under the view of ICT inventors, was verified. From these results, an increase in the register requests was found, with a stable number of inventors. Hence, it is worth highlighting the necessity to strengthen the dissemination of the legislation, as well as to show the advantages the Inventor would have by presenting a curriculum with many patents. (author)

  1. Application of resin in pulp technique for ion exchange separation of uranium from alkaline leachate

    International Nuclear Information System (INIS)

    Sreenivas, T.; Rajan, K.; Chakravorty, J.

    2014-01-01

    The hydrometallurgical process for the recovery of uranium from different ores uses ion exchange (IX) technique for the separation of dissolved uranium values. Conventionally, the IX process is carried out on leach solution obtained after the filtration or counter-current decantation of the leach slurries. Amongst the two types of leach pulps generated in uranium ore processing, viz acidic and alkaline, the latter one consists of predominantly fine-size pulps of higher viscosity, thus making the solid-liquid separation an arduous task. Sustained research for improvising the efficiency of various unit operations in the uranium process flowsheet have resulted in advent of new generation resins which are mechanically re-silent, posses higher exchange capacity thereby enabling separation of dissolved uranium ions from the leach pulps directly. Some of the prominent low-grade uranium ore deposits in India are hosted in acid consuming gangue matrix. These ore deposits necessitate fine grinding as well as application of alkaline leaching for the dissolution of uranium values. The leach pulps analyse 500 – 600 mg/l of U3O8 and contain total dissolved solutes (TDS) to the extent of about 50 g/l. Analysis of the characteristics of the leach pulp indicated suitability of resin-in-pulp technique for the separation of uranyl carbonate anions from the leachate. This paper describes the results of the RIP test work on alkaline leach slurry using various commercially available strong base anionic exchange resins. Parametric variation studies were conducted to establish the adsorption isotherm and sorption kinetics followed by elution of loaded uranium. Based on these results semi-continuous experiments on “carousel” mode were carried out. The results indicate superiority of gel type polystyrene based resins grafted with quaternary ammonium ion in comparison to the macro-porous resins. Semi-continuous counter-current extraction and elution tests indicated that about 98% of

  2. 78 FR 72064 - Request for Comments on Methods for Studying the Diversity of Patent Applicants

    Science.gov (United States)

    2013-12-02

    ..., Expert Advisor, Office of Chief Economist, United States Patent and Trademark Office, Mail Stop External..., Office of Chief Economist, by telephone at (571) 272-6900, or by email at [email protected

  3. Environmentally conscious patent histories

    Science.gov (United States)

    Crouch, Dennis D.; Crouch, Henry L.

    2004-02-01

    There is a need for investigators, legislators, and business leaders to understand the magnitude of innovation and discovery in the field of environmentally conscious technologies (ECTs). Knowledge of the "big picture" is important to providing a national and global account of actual environmental stewardship over the last twenty-five years. A recitation of the Environmental Protection Agency (EPA) supported Acts which have been enacted into law reveals one facet of the multifaceted dynamic of environmental consciousness. The popular discussion and debate, as well as partisan lobbying, which created the political forces leading to environmentally conscious legislation is another facet. A third facet is the corporate response to the threats and opportunities predicted by CEO"s and others through environmental scanning. This paper examines changes in environmentally conscious inventive effort by comparing data from United States Patents issued from 1976 through 2003. Patents are useful tool for measuring technological innovation because they are publicly available records of innovative activity. Although not all inventions result in patent applications, the monopoly rights granted on the invention give the inventor a strong incentive to obtain patents on any viable product or process. Among the results, we found a significant increase in patents relating to environmentally conscious products and processes during the period in question. Specifically, a dramatic increase in patent activity was seen for the decade of the 1990"s. Surprisingly, the patenting rate from 2000 to 2003 seems to have stabilized. Additionally public discussion of ECTs appears to have a positive impact on patent filings.

  4. Impact of pH and application time of meta-phosphoric acid on resin-enamel and resin-dentin bonding.

    Science.gov (United States)

    Cardenas, A F M; Siqueira, F S F; Bandeca, M C; Costa, S O; Lemos, M V S; Feitora, V P; Reis, A; Loguercio, A D; Gomes, J C

    2018-02-01

    To evaluate the immediate microshear resin-enamel bond strength (μSBS) and the immediate and 6-month microtensile bond strength (μTBS) and nanoleakage (NL) of the adhesive interface performed by different pHs of 40% meta-phosphoric acid (MPA) were compared with conventional 37% ortho-phosphoric acid (OPA) under different application times. Additionally, the enamel etching patterns were evaluated and the chemical/morphological changes induced by these differents groups were evaluated. One hundred and ninety-eight extracted human molars were randomly assigned into experimental groups according to the combination of independent variables: Acid [37% ortho-phosphoric acid (OPA), 40% meta-phosphoric acid (MPA) at pHs of: 0.5, 1 and 2] and Application Time [7, 15 and 30s]. Enamel-bond specimens were prepared and tested under μSBS. Resin-dentin beams were tested under μTBS tested immediately or after 6-months of water storage. Nanoleakage was evaluated using bonded-beams of each tooth/time-period. Enamel etching pattern and chemical and ultra-morphology analyses were also performed. The μSBS (MPa) data were subjected to a two-way repeated measures ANOVA (Acid vs. Application time). For μTBS, Acid vs application time vs storage time data were subjected to three-way ANOVA and Tukey's test (α = 0.05). MPA pH 0.5 showed μTBS similar to OPA, independently of the application time on enamel (p>0.05) or dentin (p>0.05). OPA provided higher nanoleakage values than MPA (p = 0.003). Significant decreases in TBS and increases in NL were only observed for OPA after 6 months (p = 0.001). An increase in the application time resulted in a more pronounced etching pattern for MPA. Chemical analysis showed that dentin demineralized by MPA depicted peaks of brushite and octacalcium phosphate. MPA exposed less collagen than OPA. However, optimal results for MPA were dependent on pH/application time. The use of 40% meta-phosphoric acid with a pH of 0.5 is an alternative acid

  5. Application of 10% Ascorbic Acid Improves Resin Shear Bond Stregth in Bleached Dentin

    Directory of Open Access Journals (Sweden)

    Kamizar Kamizar

    2014-10-01

    Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 Restoration of the teeth immediately after bleaching with H2O2 35% is contraindicated due to the remnants of free radical that will stay inside dentin for 2-3 weeks which will compromise the adhesiveness of composite resin. Objective: The aim of this study was to evaluate the influence of 10% ascorbic acid on shear bond strength of composite placed on bleached dentin. Methods:Twenty seven samples were divided equally into three groups. Group 1: dentin was etched with 35% phosphoric acid; Group 2: dentin was bleached with 35% H2O2 followed by etching with 35% phosphoric acid; Group 3: dentin was bleached with 35% H2O2, followed by application of 10% ascorbic acid and etched with 35% phosphoric acid. All samples were then stored at 370C for 24 hours. The Universal Testing Machine was used to measure shear bond strength and the results were analyzed with Kruskal Wallis and Mann Whitney test. Results: After nine independent experiments, 10% ascorbic acid application on bleached dentin resulted in highest increased in bond stregth (56.04±11.06MPa compared to Group 2 (29.09±7.63MPa and Group 1 (25.55±2.22MPa and the difference was statistically significant (p<0.05. Conclusion: Application of 10% ascorbic acid to the bleached dentin improved the shear bond strength of resin composite.

  6. Labor Mobility and Patenting Activity

    DEFF Research Database (Denmark)

    Kaiser, Ulrich; Kongsted, Hans Christian; Rønde, Thomas

    We measure the quantitative importance of labor mobility as a vehicle for the transmission of knowledge and skills across firms. For this purpose we create a unique data set that matches all applications of Danish firms at the European Patent Office to linked employer-employee register data...... for the years 1999-2002. The Danish workforce is split into "R&D workers", who hold a bachelor's or a master's degree in a technical field, and "non{R&D workers". We find that mobile R&D workers ("R&D joiners"') contribute more to patenting activity than immobile R&D workers. Furthermore, R&D workers who have...... previously been employed by a patenting firm ("patent exposed workers") have a larger effect on patenting activity than R&D workers without this experience. Patent exposed R&D joiners constitute the most productive group of workers: for firms that patented prior to 1999, one additional worker of this type...

  7. The crush and spray: a patented design for herbicide application with less waste

    Science.gov (United States)

    Cherie LeBlanc Fisher; Adam H. Wiese

    2009-01-01

    The USDA Forest Service recently patented an equipment design to deliver herbicides more efficiently and cost-effectively. Towed by a standard all-terrain vehicle, the Crush and Spray can access out-of-the-way or wet locations. An adjustable roller first knocks down the unwanted plants. A low-set spray boom with wide angle sprayer nozzles then provides precise, close-...

  8. Biomedical applications of yeast- a patent view, part one: yeasts as workhorses for the production of therapeutics and vaccines.

    Science.gov (United States)

    Roohvand, Farzin; Shokri, Mehdi; Abdollahpour-Alitappeh, Meghdad; Ehsani, Parastoo

    2017-08-01

    Yeasts, as Eukaryotes, offer unique features for ease of growth and genetic manipulation possibilities, making it an exceptional microbial host. Areas covered: This review provides general and patent-oriented insights into production of biopharmaceuticals by yeasts. Patents, wherever possible, were correlated to the original or review articles. The review describes applications of major GRAS (generally regarded as safe) yeasts for the production of therapeutic proteins and subunit vaccines; additionally, immunomodulatory properties of yeast cell wall components were reviewed for use of whole yeast cells as a new vaccine platform. The second part of the review will discuss yeast- humanization strategies and innovative applications. Expert opinion: Biomedical applications of yeasts were initiated by utilization of Saccharomyces cerevisiae, for production of leavened (fermented) products, and advanced to serve to produce biopharmaceuticals. Higher biomass production and expression/secretion yields, more similarity of glycosylation patterns to mammals and possibility of host-improvement strategies through application of synthetic biology might enhance selection of Pichia pastoris (instead of S. cerevisiae) as a host for production of biopharmaceutical in future. Immunomodulatory properties of yeast cell wall β-glucans and possibility of intracellular expression of heterologous pathogen/tumor antigens in yeast cells have expanded their application as a new platform, 'Whole Yeast Vaccines'.

  9. Spanish firms patenting in the European office. characteristics compared with non-applicant; Las empresas espanolas que patentan en la oficina Europea. Caracteristicas comparadas con las no solicitantes

    Energy Technology Data Exchange (ETDEWEB)

    Barajas, A.; Huergo, E.; Moreno, L.

    2012-07-01

    The objective of this paper is to provide evidence about the features of Spanish firms applying for patents to the European Patent Office between 1998 and 2008. We compare these firms with a control sample of non-applicants during the same period and focus especially on firms that have been awarded public aid for R and D projects by the Centre for the Development of Industrial Technology. (Author) 14 refs.

  10. Tailored benzoxazines as novel resin systems for printed circuit boards in high temperature e-mobility applications

    International Nuclear Information System (INIS)

    Troeger, K.; Darka, R. Khanpour; Neumeyer, T.; Altstaedt, V.

    2014-01-01

    This study focuses on the development of Bisphenol-F-benzoxazine resins blended with different ratios of a trifunctional epoxy resin suitable as matrix for substrates for high temperature printed circuit board (HT-PCB) applications. With the benzoxazine blends glass transition temperatures of more than 190 °C could be achieved in combination with a coefficient of thermal expansion in thickness direction (z-CTE) of less than 60 ppm/K without adding any fillers. This shows the high potential of the benzoxazine-epoxy blend systems as substrate materials for HT-PCBs. To understand the thermal behavior of the different formulations, the apparent crosslink density was calculated based on data from Dynamic Mechanical Analysis. Laminates in laboratory scale were prepared and characterized to demonstrate the transformation of the neat resin properties into real electronic substrate properties. The produced laminates exhibit a z-CTE below 40 ppm/K

  11. Tailored benzoxazines as novel resin systems for printed circuit boards in high temperature e-mobility applications

    Energy Technology Data Exchange (ETDEWEB)

    Troeger, K., E-mail: altstaedt@uni-bayreuth.de; Darka, R. Khanpour, E-mail: altstaedt@uni-bayreuth.de; Neumeyer, T., E-mail: altstaedt@uni-bayreuth.de; Altstaedt, V., E-mail: altstaedt@uni-bayreuth.de [Polymer Engineering, University of Bayreuth, Germany and Polymer Engineering, Universitaetsstrasse 30, 95447 Bayreuth (Germany)

    2014-05-15

    This study focuses on the development of Bisphenol-F-benzoxazine resins blended with different ratios of a trifunctional epoxy resin suitable as matrix for substrates for high temperature printed circuit board (HT-PCB) applications. With the benzoxazine blends glass transition temperatures of more than 190 °C could be achieved in combination with a coefficient of thermal expansion in thickness direction (z-CTE) of less than 60 ppm/K without adding any fillers. This shows the high potential of the benzoxazine-epoxy blend systems as substrate materials for HT-PCBs. To understand the thermal behavior of the different formulations, the apparent crosslink density was calculated based on data from Dynamic Mechanical Analysis. Laminates in laboratory scale were prepared and characterized to demonstrate the transformation of the neat resin properties into real electronic substrate properties. The produced laminates exhibit a z-CTE below 40 ppm/K.

  12. Research method of nuclear patent information

    International Nuclear Information System (INIS)

    Mo Dan; Gao An'na; Sun Chenglin; Wang Lei; You Xinfeng

    2010-01-01

    When faced with a huge amount of nuclear patent information, the key to effective research include: (1) Choose convenient way to search, quick access to nuclear technology related patents; (2) To overcome the language barrier, analysis the technical content of patent information; (3) Organize the publication date of retrieved patent documents, analysis the status and trends of nuclear technology development; (4) Research the patented technology of main applicants; (5) Always pay attention to the legal status of patent information, free use the invalid patents, at the same time avoid the patent infringement. Summary, patent information is important to obtain the latest technical information source, and the research work of patent information is a comprehensive understanding and mastery way for advanced nuclear technology. (authors)

  13. Application of Some Synthesized Polymeric Composite Resins for Removal of Some Metal Ions

    International Nuclear Information System (INIS)

    El-Zahhhar, A.A.; Abdel-Aziz, H.M.; Siyam, T.

    2005-01-01

    The ion-exchange and sorption characteristic of new polymeric composite resins, prepared by gamma radiation were experimentally studied. The composite resins shows high uptake for Co(II) and Eu(III) ions in aqueous solutions in wide range of ph. The selectivity of the resins to Co (II) or Eu (III) species in the presence of some competing ions and complexing agents (as Na + , Fe 3+ , EDTA Na 2 , etc.) was compared. Various factors that could affect the sorption behaviors of metal ions (Co (II) and Eu (III)) on the prepared polymeric composite resins were studied such as ionic strength, Contact time, volume mass ratio

  14. Fluorine analysis of human dentin surrounding resin composite after fluoride application by μ-PIGE/PIXE analysis

    International Nuclear Information System (INIS)

    Okuyama, Katsushi; Komatsu, Hisanori; Yamamoto, Hiroko; Pereira, Patricia N.R.; Bedran-Russo, Ana K.; Nomachi, Masaharu; Sato, Takahiro; Sano, Hidehiko

    2011-01-01

    The use of fluoride for the prevention of caries is based on the transformation of hydroxylapatite to fluoroapatite in the presence of fluoride ions, thereby strengthening tooth structure. Adhesion of dentin and resin composite (tooth-colored restoration material) requires a dentin bonding system, since resin composite is not able to adhere to dentin directly. Demineralization of dentin by acid etching is an important step in the dentin bonding system, however, demineralization also introduces weaknesses in tooth structure. If the demineralized dentin could be strengthened by the application of fluoride, then the dentin-resin composite bond strength might also improve. To test this hypothesis, the present study evaluated the influence of fluoride applications on the strength of the dentin-resin composite bond by (1) tensile strength testing analyses, (2) SEM analyses of tooth structure, and (3) detection of calcium (Ca) and fluorine (F) distribution patterns by micro proton-induced X-ray emission (μ-PIXE) and micro proton-induced gamma-ray emission (μ-PIGE) analyses conducted at the Takasaki Ion Accelerators for Advanced Radiation Application (TIARA) at the Takasaki Advanced Radiation Research Institute (TARRI). In this study, the dentin in extracted human molars was exposed by grinding and the dentin was etched with 35% phosphoric acid. Fluoride was applied at two concentrations, 0.022% (100 ppm F) and 2.21% (10,000 ppm F) NaF solution, for two time periods, 30 and 60 s, prior to bonding the resin composite with the treated dentin. Controls were prepared in the same manner, but without the fluoride application. Bond strength was measured with a micro-tensile testing unit, and the fluorine and calcium distributions at the interface between dentin and resin composite were detected by μ-PIGE and μ-PIXE analysis, respectively. Results indicate that the 10,000 ppm F applications resulted in higher bond strengths than observed in either the 100 ppm F applications or

  15. Fluorine analysis of human dentin surrounding resin composite after fluoride application by μ-PIGE/PIXE analysis

    Science.gov (United States)

    Okuyama, Katsushi; Komatsu, Hisanori; Yamamoto, Hiroko; Pereira, Patricia N. R.; Bedran-Russo, Ana K.; Nomachi, Masaharu; Sato, Takahiro; Sano, Hidehiko

    2011-10-01

    The use of fluoride for the prevention of caries is based on the transformation of hydroxylapatite to fluoroapatite in the presence of fluoride ions, thereby strengthening tooth structure. Adhesion of dentin and resin composite (tooth-colored restoration material) requires a dentin bonding system, since resin composite is not able to adhere to dentin directly. Demineralization of dentin by acid etching is an important step in the dentin bonding system, however, demineralization also introduces weaknesses in tooth structure. If the demineralized dentin could be strengthened by the application of fluoride, then the dentin-resin composite bond strength might also improve. To test this hypothesis, the present study evaluated the influence of fluoride applications on the strength of the dentin-resin composite bond by (1) tensile strength testing analyses, (2) SEM analyses of tooth structure, and (3) detection of calcium (Ca) and fluorine (F) distribution patterns by micro proton-induced X-ray emission (μ-PIXE) and micro proton-induced gamma-ray emission (μ-PIGE) analyses conducted at the Takasaki Ion Accelerators for Advanced Radiation Application (TIARA) at the Takasaki Advanced Radiation Research Institute (TARRI). In this study, the dentin in extracted human molars was exposed by grinding and the dentin was etched with 35% phosphoric acid. Fluoride was applied at two concentrations, 0.022% (100 ppm F) and 2.21% (10,000 ppm F) NaF solution, for two time periods, 30 and 60 s, prior to bonding the resin composite with the treated dentin. Controls were prepared in the same manner, but without the fluoride application. Bond strength was measured with a micro-tensile testing unit, and the fluorine and calcium distributions at the interface between dentin and resin composite were detected by μ-PIGE and μ-PIXE analysis, respectively. Results indicate that the 10,000 ppm F applications resulted in higher bond strengths than observed in either the 100 ppm F applications or

  16. Fluorine analysis of human dentin surrounding resin composite after fluoride application by {mu}-PIGE/PIXE analysis

    Energy Technology Data Exchange (ETDEWEB)

    Okuyama, Katsushi, E-mail: katsu@den.hokudai.ac.jp [Graduate School of Dental Medicine, Hokkaido University, Department of Restorative Dentistry, Kita-13, Nishi-7, Kita-ku, Hokkaido, Sapporo 060-8586 (Japan) and School of Dentistry, University of North Carolina, Department of Operative Dentistry, 302 Brauer, CB 7450, Chapel Hill, NC 27599-7450 (United States); Komatsu, Hisanori [Graduate School of Dental Medicine, Hokkaido University, Department of Restorative Dentistry, Kita-13, Nishi-7, Kita-ku, Hokkaido, Sapporo 060-8586 (Japan); Yamamoto, Hiroko [Graduate School of Dentistry, Osaka University, 1-8 Yamada-Oka, Osaka, Suita 565-0871 (Japan); Pereira, Patricia N.R. [School of Dentistry, University of North Carolina, Department of Operative Dentistry, 302 Brauer, CB 7450, Chapel Hill, NC 27599-7450 (United States); Bedran-Russo, Ana K. [University of Illinois at Chicago, College of Dentistry, Department of Restorative Dentistry, 801 S. Paulina St., Chicago, IL 60612 (United States); Nomachi, Masaharu [Graduate School of Science, Osaka University, 1-1 Machikaneyama, Osaka, Toyonaka 560-0043 (Japan); Sato, Takahiro [TARRI, JAEA, Advanced Radiation Technology, 1233 Watanuki-machi, Gunma, Takasaki 370-1292 (Japan); Sano, Hidehiko [Graduate School of Dental Medicine, Hokkaido University, Department of Restorative Dentistry, Kita-13, Nishi-7, Kita-ku, Hokkaido, Sapporo 060-8586 (Japan)

    2011-10-15

    The use of fluoride for the prevention of caries is based on the transformation of hydroxylapatite to fluoroapatite in the presence of fluoride ions, thereby strengthening tooth structure. Adhesion of dentin and resin composite (tooth-colored restoration material) requires a dentin bonding system, since resin composite is not able to adhere to dentin directly. Demineralization of dentin by acid etching is an important step in the dentin bonding system, however, demineralization also introduces weaknesses in tooth structure. If the demineralized dentin could be strengthened by the application of fluoride, then the dentin-resin composite bond strength might also improve. To test this hypothesis, the present study evaluated the influence of fluoride applications on the strength of the dentin-resin composite bond by (1) tensile strength testing analyses, (2) SEM analyses of tooth structure, and (3) detection of calcium (Ca) and fluorine (F) distribution patterns by micro proton-induced X-ray emission ({mu}-PIXE) and micro proton-induced gamma-ray emission ({mu}-PIGE) analyses conducted at the Takasaki Ion Accelerators for Advanced Radiation Application (TIARA) at the Takasaki Advanced Radiation Research Institute (TARRI). In this study, the dentin in extracted human molars was exposed by grinding and the dentin was etched with 35% phosphoric acid. Fluoride was applied at two concentrations, 0.022% (100 ppm F) and 2.21% (10,000 ppm F) NaF solution, for two time periods, 30 and 60 s, prior to bonding the resin composite with the treated dentin. Controls were prepared in the same manner, but without the fluoride application. Bond strength was measured with a micro-tensile testing unit, and the fluorine and calcium distributions at the interface between dentin and resin composite were detected by {mu}-PIGE and {mu}-PIXE analysis, respectively. Results indicate that the 10,000 ppm F applications resulted in higher bond strengths than observed in either the 100 ppm F

  17. Essentials of the successful drafting of invention applications on nuclear technology in the view of patent examination

    International Nuclear Information System (INIS)

    Zhai Chenyang

    2010-01-01

    Up to now, there has been a comparatively low ratio of domestic authorization in terms of invention applications in the field of nuclear technology. In this paper, the main reasons according to my experience in the patent examination are revealed in the following three aspects: (1) there is a lack of novelty or inventive step; (2) the scope of some claims is not clearly defined; (3) the description is improperly drafting. Common problems are shown and analyzed. Suggestion for avoiding the problems and corresponding solutions are given. (author)

  18. Will Governmental Incentives in Developing Countries Support Companies to Innovate More? Evidences from Skin Care Patent Applications in Brazil

    Directory of Open Access Journals (Sweden)

    Ivan Domicio da Silva Souza

    2014-09-01

    Full Text Available Recent Brazilian Governments have provided incentives to support domestic innovation; however, some claim that the country has set conflicting policies towards innovation, industrial property and biodiversity exploitation. After an analysis of patent applications filled in the Brazilian National Institute of Industrial Property, we observed that current governmental measures have not performed as expected, at least in the skin care industry. Throughout the paper we discuss plausible reasons why this sector has not managed to innovate more, reasons that may affect other businesses as well. This case is exemplary to developing economies that have implemented or are in the process of renewing their innovation policies.

  19. Patent business guide in a domestic and foreign countries

    International Nuclear Information System (INIS)

    2009-09-01

    This book explains general things on industrial property right, which includes description of industrial property right, types, qualification for application of patent, application guide, on-line application, useful procedure of application, writing methods and samples for application of patents such as design patent and trademarks patent, writing skill and examples for registration, writing ways and examples related examination and writing tips and samples on international application of patent.

  20. Transferring diffractive optics from research to commercial applications: Part I - progress in the patent landscape

    Science.gov (United States)

    Brunner, Robert

    2013-12-01

    In the last 20 years, diffractive optics experienced a strong research interest and was in the center of many development projects in applied optics. To offer a side view for optical engineers, here, we discuss selected, business-related aspects of the current status of the transfer process to bring diffractive optics into commercial products. The contribution is divided into two parts. Here, in part I, we focus on the patent landscape of diffractive optics with a closer look on the temporal development and the distribution over main players. As an important result, currently, new strong patent activities are observed especially in the context of imaging systems. In the second part, the business volumes of selected market segments are discussed.

  1. Grant Patents on Animals? An Ethical and Legal Battle Looms.

    Science.gov (United States)

    Wheeler, David L.

    1987-01-01

    Rulings on applications for animal patents being considered by the U.S. Patent and Trademark Office could profoundly influence university patent and research income. Many animal-rights advocates have expressed philosophical objections to genetic engineering of animals. (MLW)

  2. Clinical application of removable partial dentures using thermoplastic resin. Part II: Material properties and clinical features of non-metal clasp dentures.

    Science.gov (United States)

    Fueki, Kenji; Ohkubo, Chikahiro; Yatabe, Masaru; Arakawa, Ichiro; Arita, Masahiro; Ino, Satoshi; Kanamori, Toshikazu; Kawai, Yasuhiko; Kawara, Misao; Komiyama, Osamu; Suzuki, Tetsuya; Nagata, Kazuhiro; Hosoki, Maki; Masumi, Shin-ichi; Yamauchi, Mutsuo; Aita, Hideki; Ono, Takahiro; Kondo, Hisatomo; Tamaki, Katsushi; Matsuka, Yoshizo; Tsukasaki, Hiroaki; Fujisawa, Masanori; Baba, Kazuyoshi; Koyano, Kiyoshi; Yatani, Hirofumi

    2014-04-01

    This position paper reviews physical and mechanical properties of thermoplastic resin used for non-metal clasp dentures, and describes feature of each thermoplastic resin in clinical application of non-metal clasp dentures and complications based on clinical experience of expert panels. Since products of thermoplastic resin have great variability in physical and mechanical properties, clinicians should utilize them with careful consideration of the specific properties of each product. In general, thermoplastic resin has lower color-stability and higher risk for fracture than polymethyl methacrylate. Additionally, the surface of thermoplastic resin becomes roughened more easily than polymethyl methacrylate. Studies related to material properties of thermoplastic resin, treatment efficacy and follow-up are insufficient to provide definitive conclusions at this time. Therefore, this position paper should be revised based on future studies and a clinical guideline should be provided. Copyright © 2014 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  3. Patent applications for using DNA technologies to authenticate medicinal herbal material

    Directory of Open Access Journals (Sweden)

    Chan Albert

    2009-11-01

    Full Text Available Abstract Herbal medicines are used in many countries for maintaining health and treating diseases. Their efficacy depends on the use of the correct materials, and life-threatening poisoning may occur if toxic adulterants or substitutes are administered instead. Identification of a medicinal material at the DNA level provides an objective and powerful tool for quality control. Extraction of high-quality DNA is the first crucial step in DNA authentication, followed by a battery of DNA techniques including whole genome fingerprinting, DNA sequencing and DNA microarray to establish the identity of the material. New or improved technologies have been developed and valuable data have been collected and compiled for DNA authentication. Some of these technologies and data are patentable. This article provides an overview of some recent patents that cover the extraction of DNA from medicinal materials, the amplification of DNA using improved reaction conditions, the generation of DNA sequences and fingerprints, and the development of high-throughput authentication methods. It also briefly explains why these patents have been granted.

  4. Influence of power density and primer application on polymerization of dual-cured resin cements monitored by ultrasonic measurement.

    Science.gov (United States)

    Takubo, Chikako; Yasuda, Genta; Murayama, Ryosuke; Ogura, Yukari; Tonegawa, Motoka; Kurokawa, Hiroyasu; Miyazaki, Masashi

    2010-08-01

    We used ultrasonic measurements to monitor the influence of power density and primer application on the polymerization reaction of dual-cured resin cements. The ultrasonic equipment comprised a pulser-receiver, transducers, and an oscilloscope. Resin cements were mixed and inserted into a transparent mould, and specimens were placed on the sample stage, onto which the primer, if used, was also applied. Power densities of 0 (no irradiation), 200, or 600 mW cm(-2) were used for curing. The transit time through the cement disk was divided by the specimen thickness to obtain the longitudinal sound velocity. When resin cements were light-irradiated, each curve displayed an initial plateau of approximately 1,500 m s(-1), which rapidly increased to a second plateau of 2,300-2,900 m s(-1). The rate of sound velocity increase was retarded when the cements were light-irradiated at lower power densities, and increased when the primer was applied. The polymerization behaviour of dual-cured resin cements was therefore shown to be affected by the power density of the curing unit and the application of self-etching primer. (c) 2010 The Authors. Journal compilation (c) 2010 Eur J Oral Sci.

  5. Applications of Blue Light-curing Acrylic Resin to Forensic Sample Preparation and Microtomy.

    Science.gov (United States)

    Groves, Ethan; Palenik, Christopher S

    2016-03-01

    This study discusses the results of an evaluation of a one-part blue light-curing acrylic resin for embedding trace evidence prior to the preparation of thin sections with a microtome. Through a comparison to several epoxy resins, the physical properties relevant to both trace evidence examination and analytical microscopy in general, including as viscosity, clarity, color, hardness, and cure speed, were explored. Finally, thin sections from paint samples embedded in this acrylic resin were evaluated to determine if, through smearing or impregnation, the resin contributed to the infrared spectra. The results of this study show that blue light-curing acrylic resins provide the desired properties of an embedding medium, generate high-quality thin sections, and can significantly simplify the preparation of paint chips, fibers and a multitude of other types of microscopic samples in the forensic trace evidence laboratory. © 2015 American Academy of Forensic Sciences.

  6. Patent office governance and patent system quality

    OpenAIRE

    PICARD, Pierre M.; VAN POTTELSBERGHE DE LA POTTERIE, Bruno

    2011-01-01

    The present paper discusses the role of quality in patent systems from the perspective of patent offices' behavior and organization. After documenting original stylized facts, the paper presents a model in which patent offices set patent fees and the quality level of their examination processes. Various objectives of patent offices' governors are considered. We show that the quality of the patent system is maximal for the patent offices that maximises either the social welfare or its own prof...

  7. Phenolic resin-based porous carbons for adsorption and energy storage applications

    Science.gov (United States)

    Wickramaratne, Nilantha P.

    The main objective of this dissertation research is to develop phenolic resin based carbon materials for range of applications by soft-templating and Stober-like synthesis strategies. Applications Studied in this dissertation are adsorption of CO2, bio-molecular and heavy metal ions, and energy storage devices. Based on that, our goal is to design carbon materials with desired pore structure, high surface area, graphitic domains, incorporated metal nanoparticles, and specific organic groups and heteroatoms. In this dissertation the organic-organic self-assembly of phenolic resins and triblock copolymers under acidic conditions will be used to obtain mesoporous carbons/carbon composites and Stober-like synthesis involving phenolic resins under basic condition will be used to prepare polymer/carbon particles and their composites. The structure of this dissertation consists of an introductory chapter (Chapter 1) discussing the general synthesis of carbon materials, particularly the soft-templating strategy and Stober-like carbon synthesis. Also, Chapter 1 includes a brief outline of applications namely adsorption of CO2, biomolecule and heavy metal ions, and supercapacitors. Chapter 2 discusses the techniques used for characterization of the carbon materials studied. This chapter starts with nitrogen adsorption analysis, which is used to measure the specific surface area, pore volume, distribution of pore sizes, and pore width. In addition to nitrogen adsorption, powder X-ray diffraction (XRD), transmission electron microscopy (TEM), high resolution thermogravimetric analysis (HR-TGA), cyclic voltammetry (CV) and CHNS elemental analysis (EA) are mentioned too. Chapter 3 is focused on carbon materials for CO2 adsorption. There are different types of porous solid materials such as silicate, MOFs, carbons, and zeolites studied for CO2 adsorption. However, the carbon based materials are considered to be the best candidates for CO 2 adsorption to the industrial point of

  8. Examining the Impact of Family Management on Patent Applications for German Industrial Firms

    Directory of Open Access Journals (Sweden)

    Wolfgang Burr

    2015-08-01

    Full Text Available Elaborating the innovation behavior of family-owned businesses, prior research primary focused on the impact of ownership structure on innovation. However, surprisingly little attention has been given to understand the role of family management in this context. Our study contributes to literature closing this research gap. Using the number of applied patents as proxy for R&D outcome, our findings show that family management affects R&D output negatively. The empirical results of the study are in line with expectations drawn from agency and stewardship perspectives supposing substantial differences in research and development strategies of family and non-family managers.

  9. Characterization and Application of Urea-Formaldehyde-Furfural Co-condensed Resins as Wood Adhesives

    Directory of Open Access Journals (Sweden)

    Jizhi Zhang

    2014-08-01

    Full Text Available Furfural, as an organic compound derived from biomass materials, was used to partially substitute for formaldehyde in the synthesis of UF resin. Urea-formaldehyde-furfural co-condensed (UFFR resins with different substitute ratios of furfural to formaldehyde (FR/F were prepared. The effects of the FR/F substitute ratio on the performances of UFFR resins were investigated. Matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF-MS and Fourier transform infrared spectroscopy (FT-IR were applied to characterize the chemical structures of UFFR resins. Plywood bonded by these resins was manufactured, and its bond strength and formaldehyde emission were measured. The results showed that the substitution of furfural in place of formaldehyde could reduce the free formaldehyde content effectively at the expense of prolongation of the curing time. The spectra of MALDI-TOF and FTIR confirmed the co-condensation of urea-formaldehyde-furfural both in uncured and cured resins. Plywood prepared under optimized parameters could yield high bond strength and low formaldehyde emission, which were 0.84 MPa and 0.23 ppm, respectively. The optimized parameters were as follows: a FR/F substitute ratio of 1/3; 1% (NH42S2O8 as the curing agent; and a hot pressing temperature of 130 °C. Hence, it is feasible to substitute partially formaldehyde by furfural to prepare UFFR resins as wood adhesives for plywood.

  10. Application of nanotechnology in the treatment and diagnosis of gastrointestinal cancers: review of recent patents.

    Science.gov (United States)

    Prados, Jose; Melguizo, Consolacion; Perazzoli, Gloria; Cabeza, Laura; Carrasco, Esther; Oliver, Jaime; Jiménez-Luna, Cristina; Leiva, Maria C; Ortiz, Raúl; Álvarez, Pablo J; Aranega, Antonia

    2014-01-01

    Gastrointestinal cancers remain one of the main causes of death in developed countries. The main obstacles to combating these diseases are the limitations of current diagnostic techniques and the low stability, availability, and/or specificity of pharmacological treatment. In recent years, nanotechnology has revolutionized many fields of medicine, including oncology. The association of chemotherapeutic agents with nanoparticles offers improvement in the solubility and stability of antitumor agents, avoidance of drug degradation, and reductions in therapeutic dose and toxicity, increasing drug levels in tumor tissue and decreasing them in healthy tissue. The use of specific molecules that drive nanoparticles to the tumor tissue represents a major advance in therapeutic specificity. In addition, the use of nanotechnology in contrast agents has yielded improvements in the diagnosis and the follow-up of tumors. These nanotechnologies have all been applied in gastrointestinal cancer treatment, first in vitro, and subsequently in vivo, with promising results reported in some clinical trials. A large number of patents have been generated by nanotechnology research over recent years. The objective of this paper is to review patents on the clinical use of nanoparticles for gastrointestinal cancer diagnosis and therapy and to offer an overview of the impact of nanotechnology on the management of this disease.

  11. Surface roughness of composite resin veneer after application of herbal and non-herbal toothpaste

    Science.gov (United States)

    Nuraini, S.; Herda, E.; Irawan, B.

    2017-08-01

    The aim of this study was to find out the surface roughness of composite resin veneer after brushing. In this study, 24 specimens of composite resin veneer are divided into three subgroups: brushed without toothpaste, brushed with non-herbal toothpaste, and brushed with herbal toothpaste. Brushing was performed for one set of 5,000 strokes and continued for a second set of 5,000 strokes. Roughness of composite resin veneer was determined using a Surface Roughness Tester. The results were statistically analyzed using Kruskal-Wallis nonparametric test and Post Hoc Mann-Whitney. The results indicate that the highest difference among the Ra values occurred within the subgroup that was brushed with the herbal toothpaste. In conclusion, the herbal toothpaste produced a rougher surface on composite resin veneer compared to non-herbal toothpaste.

  12. Synthesis, characterization and applications of a new cation exchanger tamarind sulphonic acid (TSA) resin.

    Science.gov (United States)

    Singh, A V; Sharma, Naresh Kumar; Rathore, Abhay S

    2012-01-01

    A new composite cation exchanger, tamarind sulphonic acid (TSA) resin has been synthesized. The chemically modified TSA ion exchange resin has been used for the removal and preconcentration of Zn2+, Cd2+, Fe2+, Co2+ and Cu2+ ions in aqueous solution and effluent from the Laxmi steel plant in Jodhpur, India. This type of composite represents a new class of hybrid ion exchangers with good ion exchange capacity, stability, reproducibility and selectivity for toxic metal ions found in effluent from the steel industry. The characterization of the resin was carried out by determining the ion-exchange capacity, elemental analysis, pH titration, Fourier transform infrared spectra and thermal analysis. The distribution coefficients (K(d)) of toxic metal ions were determined in a reference aqueous solution and the steel plant effluent at different pH values; the absorbency of different metal ions on the TSA resin was studied for up to 10 cycles. The adsorption of different metal ions on TSA resin follows the order: Co2+ > Cu2+ > Zn2+ > Fe2+ > Cd2+. The ion exchange capacity of TSA resin is 2.87%.

  13. Application of Resin in Pulp Technique for Ion Exchange Separation of Uranium from Alkaline Leachate

    International Nuclear Information System (INIS)

    Sreenivas, T.; Rajan, K.C.; Chakravartty, J.K.

    2014-01-01

    Conclusions: • Resin-in-pulp technique was applied for purification and enrichment of uranium values from a finely ground uranium ore leach slurry of alkaline nature using strong base anion exchange resin (size 500 - 675μm). • The chemical composition of the solution phase of the alkaline leach slurry (pH 9.5) was consisting of about 40 g/L of total dissolved solutes (TDS) predominantly with Na_2CO_3 and NaHCO_3 and minor levels of Na_2SO_4. The uranium content was only 730 mg/L and d50 of solids was 34μm. • Amongst the various commercially available resins studied PFA 4740 and 4783 having quaternary ammonium ion on polystyrene crosslink with divibyl benzez (DVB) gave best performance. The maximum loading capacity achieved in the RIP studies was about 60-65 g of U_3O_8/L of wet settled resin amounting to 98% of loading. This has necessitated 4 stages of counter-current extraction with overall contact time of 100 minutes at a resin to leach slurry volume ratio of about 1:50. Practically the entire uranium values loaded on the resin were eluted using NaCl. • The RIP process was found quite efficient for uranium bearing alkaline leach slurries.

  14. The backlog issue in patents: A look at the European case

    NARCIS (Netherlands)

    Rodriguez, V.

    2010-01-01

    Backlogs can be caused by an increase in the number of patent applications and patent size. A large number of patents granted could be explained by patent examiners' bonuses, legal and cultural contexts, claim forms, the geographical origin of patents, a firm's experience in patenting, the number of

  15. Are biosimilars patentable?

    Science.gov (United States)

    Rolfe, Damian; Parker, Jayson; Morgan, Max

    2016-08-01

    This paper explores whether, and under what circumstances, a biosimilar approved in the United States under the Biologics Price Competition and Innovation Act (hereafter 'BPCIA') can be patented. The possibility that a biosimilar product could have meaningful patent protection arises from specific requirements for biosimilarity under the BPCIA, which account for the fact that manufacturing processes of biologics are inherently imprecise. The requirements for biosimilar approval may provide sufficient leeway to a biosimilar applicant to patent structural or formulation differences that provide non-clinical but business-relevant advantages over the reference molecule, such as improved shelf-life or ease of manufacture, without compromising clinical biosimilarity. Examination of the BPCIA and related Acts, Food and Drug Administration (FDA) guidance papers, case law, patent database searching, and relevant scholarly articles. Legislative and regulatory requirements for the approval of a biosimilar under the BPCIA are focused on clinical results and allow a degree of leeway for differences to exist between a biosimilar's structure and non-clinical components and those of the biosimilar's reference molecule. This leeway can be exploited to provide the biosimilar with potentially patentable business-relevant advantages over its reference product while maintaining clinical biosimilarity to the reference product.

  16. NON DESTRUCTIVE APPLICATION OF RADIOACTIVE TRACER TECHNIQUE FOR CHARACTERIZATION OF INDUSTRIAL GRADE ANION EXCHANGE RESINS INDION GS-300 AND INDION-860

    Directory of Open Access Journals (Sweden)

    P.U. SINGARE

    2014-02-01

    Full Text Available The paper deals with the application of radio isotopic non-destructive technique in the characterization of two industrial grade anion exchange resins Indion GS-300 and Indion-860. For the characterization of the two resins, 131I and 82Br were used as tracer isotopes to trace the kinetics of iodide and bromide ion-isotopic exchange reactions. It was observed that the values of specific reaction rate (min−1, amount of iodide ion exchanged (mmol, initial rate of iodide ion exchange (mmol/min and log Kd were calculated as 0.328, 0.577, 0.189 and 19.7 respectively for Indion GS-300 resin, which was higher than the respective values of 0.180, 0.386, 0.070 and 17.0 calculated for Indion-860 resins when measured under identical experimental conditions. Also at a constant temperature of 40.0 °C, as the concentration of labeled iodide ion solution increases 0.001 M to 0.004 M, the percentage of iodide ions exchanged increases from 75.16 % to 78.36 % for Indion GS-300 resins, which was higher than the increases from 49.65 % to 52.36 % compared to that obtained for Indion-860 resins. The overall results indicate that under identical experimental conditions, Indion GS-300 resins show superior performance over Indion-860 resins.

  17. Non Destructive Application of Radioactive Tracer Technique for Characterization of Industrial Grade Anion Exchange Resins Indio GS-300 and Indion-860

    International Nuclear Information System (INIS)

    Singare, P. U.

    2014-01-01

    The paper deals with the application of radio isotopic non-destructive technique in the characterization of two industrial grade anion exchange resins Indion GS-300 and Indion-860. For the characterization of the two resins, 131 I and 82 Br were used as tracer isotopes to trace the kinetics of iodide and bromide ion-isotopic exchange reactions. It was observed that the values of specific reaction rate (min -1 ), amount of iodide ion exchanged (mmol), initial rate of iodide ion exchange (mmol/min) and log K d were calculated as 0.328, 0.577, 0.189 and 19.7 respectively for Indion GS-300 resin, which was higher than the respective values of 0.180, 0.386, 0.070 and 17.0 calculated for Indion-860 resins when measured under identical experimental conditions. Also at a constant temperature of 40.0 .deg. C, as the concentration of labeled iodide ion solution increases 0.001 M to 0.004 M, the percentage of iodide ions exchanged increases from 75.16 % to 78.36 % for Indion GS-300 resins, which was higher than the increases from 49.65 % to 52.36 % compared to that obtained for Indion-860 resins. The overall results indicate that under identical experimental conditions, Indion GS-300 resins show superior performance over Indion-860 resins

  18. Application of Cardio-O-Fix occluders for transcatheter closure of patent ductus arteriosus and interatrial communications: Preliminary experience.

    Science.gov (United States)

    Białkowski, Jacek; Szkutnik, Małgorzata; Fiszer, Roland; Głowacki, Jan; Banaszak, Paweł; Zembala, Marian

    2010-01-01

    Transcatheter treatment has become the method of choice for treating many heart defects. Recently, Cardio-O-Fix occluder (COF) - a new, self-expandable nitinol wire-mesh device very similar to the Amplatzer device - has been introduced into clinical practice. To the best of our knowledge, this is the first publication related to its application. Five patients aged from six months to 69 years were included in the study: two with atrial septal defect (ASD), one with patent foramen ovale (PFO) after cryptogenic stroke, and two with patent ductus arteriosus (PDA). These latter two comprised one six month old infant with co-existent hypertrophied cardiomyopathy, and a 53 year-old woman with recanalized PDA after previous ligation. All were treated percutaneously with COF. There was no preliminary patient selection. The only limitation was the size of the devices in our possession (16 and 22 mm ASD COF, 25 PFO COF, 4/6 and 6/8 PDA COF). The implantation technique was the same as previously described for Amplatzer occluders. All procedures were finished successfully with complete closure of the shunt. No complications were observed during a six month follow-up. In the child with PDA, we observed decrease of gradient from 80 to 60 mm Hg in hypertrophied left ventricular outflow tract, although a small protrusion of PDA-COF device was noted in the descending aorta (8 mm Hg gradient in ECHO). In the patient with recanalized PDA, the procedure was performed after arterio-venous loop creation. Mean fluoroscopy time was 4.4 (range from 1.6 to 11) minutes. Our preliminary experience indicates that the application of Cardio-O-Fix devices is safe and effective.

  19. 75 FR 15419 - Notice of Intent To Grant Exclusive License of U.S. Patent Application No. 12/432,842 Filed April...

    Science.gov (United States)

    2010-03-29

    ... Exclusive License of U.S. Patent Application No. 12/432,842 Filed April 30, 2009 Entitled: ``A Soil Stabilization Soil Comprising Same, and a Method of Stabilizing Soil'' AGENCY: Department of the Army, U.S. Army... climates with sandy, gravelly soils where emulsions and hydraulic cements will not effectively cure. If...

  20. 75 FR 54330 - Intent To Grant an Exclusive Field of Use License of a U.S. Government-Owned Patent Application

    Science.gov (United States)

    2010-09-07

    ... DEPARTMENT OF DEFENSE Department of the Army Intent To Grant an Exclusive Field of Use License of a U.S. Government-Owned Patent Application AGENCY: Department of the Army, DoD. ACTION: Notice... intent to grant an exclusive, revocable license for the field of use in the research reagent market to...

  1. 75 FR 39668 - Intent To Grant a Field of Use Exclusive License of a U.S. Government-Owned Patent Application

    Science.gov (United States)

    2010-07-12

    ... DEPARTMENT OF DEFENSE Department of the Army Intent To Grant a Field of Use Exclusive License of a U.S. Government-Owned Patent Application AGENCY: Department of the Army, DoD. ACTION: Notice... intent to grant a field of use exclusive, revocable license for the field of shigella vaccine development...

  2. [Application of individual light-curing resin tray as edge plastic material in complete denture modulo].

    Science.gov (United States)

    Chai, Mei; Tang, Xuyan; Liang, Guangku

    2015-12-01

    To investigate clinical effect of individual light-curing resin tray as edge plastic material in complete denture modulo.
 A total of 30 patients with poor condition for alveolar ridge of mandible were chosen individual tray with individual light-curing resin tray for material edge shaping or traditional individual impression tray for edge shaping cream to produce complete denture. The operability, questionnaire about denture retention, comfort, mucosal cases and chewing function in the process of shaping the edge were investigated three months later after wearing dentures.
 There was no significant difference in retention, comfort, mucosa and the chewing function between the two mandibular denture impression methods. However, the patients with individual light-curing resin tray as edge shaping material felt better in the process than that in the patients with die-cream as the edge shaping material (P<0.05). Furthermore, the manipulation with individual light-curing resin tray as edge shaping material is easy for doctor.
 Although the clinical effect of Individual light-curing resin tray material as the edge shaping material is equal to that of impression cream, it saves time and human resource. Moreover, it is more acceptable for the patients and thus it can be spread in clinics.

  3. A novel application of resin in pulp in the metallurgical industry

    International Nuclear Information System (INIS)

    Fleming, C.A.; Cromberge, G.

    1985-01-01

    The results are presented of several small-scale pilot-plant investigations that demonstrate the feasibility of a resin-in-pulp process for the combined extraction of gold and uranium. Both metals are leached into an aqueous solution as anionic complexes, and, under appropriate conditions, both metal anions can be stabilized in the same solution and extracted from that solution by anion-exchange resins. Three different lead materials containing gold and uranium were tested, and several configurations for leaching and the resin-in-pulp process were examined so that the efficiency of extraction of the process could be demonsrated. The results of the various pilot-plant investigations are discussed with particular emphasis on the deportment of gold and uranium during the leaching extraction, and elution steps

  4. Characterization of solid UV curable 3D printer resins for biological applications

    KAUST Repository

    Sivashankar, Shilpa; Agambayev, Sumeyra; Buttner, Ulrich; Salama, Khaled N.

    2016-01-01

    to agglutinate. Six different types of 3D printer resins were compared to test the biocompatibility. The study showed that only few among them could be used for fabrication of micro channels and that had least effect on biological molecules that could be used

  5. 48 CFR 31.205-30 - Patent costs.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Patent costs. 31.205-30....205-30 Patent costs. (a) The following patent costs are allowable to the extent that they are incurred... patent application where title or royalty-free license is to be conveyed to the Government. (b) General...

  6. Resin impregnation process for producing a resin-fiber composite

    Science.gov (United States)

    Palmer, Raymond J. (Inventor); Moore, William E. (Inventor)

    1994-01-01

    Process for vacuum impregnation of a dry fiber reinforcement with a curable resin to produce a resin-fiber composite, by drawing a vacuum to permit flow of curable liquid resin into and through a fiber reinforcement to impregnate same and curing the resin-impregnated fiber reinforcement at a sufficient temperature and pressure to effect final curing. Both vacuum and positive pressure, e.g. autoclave pressure, are applied to the dry fiber reinforcement prior to application of heat and prior to any resin flow to compact the dry fiber reinforcement, and produce a resin-fiber composite of reduced weight, thickness and resin content, and improved mechanical properties. Preferably both a vacuum and positive pressure, e.g. autoclave pressure, are also applied during final curing.

  7. Recent patents on flavonoids.

    Science.gov (United States)

    Mamta, Gokhale; Bansal, Y K; Sandhu, S S

    2013-12-01

    Flavonoids are substances which are widely distributed in the plant kingdom. They occur in considerable quantities in common food products, spices and beverages. Interest of researchers has been greatly enhanced towards therapeutic potential of flavonoids in last some years. This review summarizes important patents pertaining to recent biotechnological techniques applied for the production, analysis of biosynthetic pathways, effects and applications of different flavonoids. For systematic studies investigations which have been published in the form of patents, are classified in different sectors like biosynthesis, medical application, antimicrobial activity, alteration of flower color, industrial application, cosmetics, food and plant tissue culture. A number of activities have been observed in each sector with vast area of research on flavonoids.

  8. US photovoltaic patents: 1991--1993

    Energy Technology Data Exchange (ETDEWEB)

    Pohle, L

    1995-03-01

    This document contains US patents on terrestrial photovoltaic (PV) power applications, including systems, components, and materials as well as manufacturing and support functions. The patent entries in this document were issued from 1991 to 1993. The entries were located by searching USPA, the database of the US Patent Office. The final search retrieved all patents under the class ``Batteries, Thermoelectric and Photoelectric`` and the subclasses ``Photoelectric,`` ``Testing,`` and ``Applications.`` The search also located patents that contained the words ``photovoltaic(s)`` or ``solar cell(s)`` and their derivatives. After the initial list was compiled, most of the patents on the following subjects were excluded: space photovoltaic technology, use of the photovoltaic effect for detectors, and subjects only peripherally concerned with photovoltaic. Some patents on these three subjects were included when ft appeared that those inventions might be of use in terrestrial PV power technologies.

  9. The Patentability of Stem Cells in Australia.

    Science.gov (United States)

    Petering, Jenny; Cowin, Prue

    2015-07-01

    The potential therapeutic applications of stem cells are unlimited. However, the ongoing political and social debate surrounding the intellectual property and patenting considerations of stem cell research has led to the implementation of strict legislative regulations. In Australia the patent landscape surrounding stem cells has evolved considerably over the past 20 years. The Australian Patents Act 1990 includes a specific exclusion to the patentability of human beings and of biological processes for their generation. However, this exclusion has received no judicial consideration to date, and so its scope and potential impact on stem cell patents is unclear. Copyright © 2015 Cold Spring Harbor Laboratory Press; all rights reserved.

  10. US patent interferences vs. international first-to-file patent systems, and current GATT problems

    International Nuclear Information System (INIS)

    Parkhurst, R.W.; Serbinowski, P.A.

    1991-01-01

    Simultaneous superconductivity research activities by different entities have resulted in numerous US patent applications, some of which may claim identical inventions and thus likely will be involved in interference proceedings in the US Patent and Trademark Office to determine which inventors are entitled to priority of invention and the resulting US patent. The determination in an interference proceeding of what inventors were the first-to-invent a patentable invention is contrasted with the patent systems in the rest of the world where the first inventor to file his patent application automatically gains priority. This issue and other aspects of US patent law are the subjects of criticism of US patent law and practice in the current Uruguay round of talks on the General Agreement on Trade and Tariffs (GATT). Interesting aspects of each of these subjects will be discussed

  11. Discrimination against foreigners in the patent system : evidence from standard-essential patents

    NARCIS (Netherlands)

    de Rassenfosse, G.; Raiteri, E.; Bekkers, R.N.A.

    This paper tests for traces of discrimination against foreign firms in the patent prosecution process. It focuses on the case of China and looks specifically at patent applications declared as essential to a technological standard. The choice of standard-essential patents (SEPs) is particularly

  12. Discrimination in the patent system: evidence from standard-essential patents

    NARCIS (Netherlands)

    de Rassenfosse, G.; Raiteri, E.; Bekkers, R.N.A.

    2017-01-01

    This paper tests for traces of discrimination against foreigners in the patent prosecution process. It focuses on the case of China and looks specifically at patent applications declared as essential to a technological standard, so called standard-essential patents. The identification strategy

  13. Use of Patent Applications as a Tool for Technology Development Prospection on the Ethanol Production Chain from Lignocellulosic Biomasses in Brazil

    Directory of Open Access Journals (Sweden)

    Luiz André Felizardo Silva Schlittler

    2012-09-01

    Full Text Available The growing concerns regarding the future of global energy supplies have encouraged R&D in alternative sources to complement the global energy matrix. Brazil has earned notoriety as one of the largest producers of ethanol and biomass. This has aroused other countries’ interest in Brazil’s capabilities. However, the technologies for converting biomass into ethanol are not sufficiently mature, and have been developed in a decentralized manner. The lignocellulosic ethanol technologies can be divided into the following three groups: pretreatment, enzymes and ethanol production. One of the most efficient methods for mapping such technologies is through patent applications because the applications provide important information on trends in long-term technological development. Among all the patent applications deposited in the Brazilian database, pretreatment technologies were the most exploited followed by enzymes and ethanol production. The large number of documents from USA and European countries efforts the importance of Brazil in this technological scenario.

  14. Patent first, ask questions later: morality and biotechnology in patent law.

    Science.gov (United States)

    Bagley, Margo A

    2003-12-01

    This Article explores the U.S. "patent first, ask questions later" approach to determining what subject matter should receive patent protection. Under this approach, the U.S. Patent and Trademark Office (USPTO or the Agency) issues patents on "anything under the sun made by man," and to the extent a patent's subject matter is sufficiently controversial, Congress acts retrospectively in assessing whether patents should issue on such interventions. This practice has important ramifications for morally controversial biotechnology patents specifically, and for American society generally. For many years a judicially created "moral utility" doctrine served as a type of gatekeeper of patent subject matter eligibility. The doctrine allowed both the USTPO and courts to deny patents on morally controversial subject matter under the fiction that such inventions were not "useful." The gate, however, is currently untended. A combination of the demise of the moral utility doctrine, along with expansive judicial interpretations of the scope of patent-eligible subject matter, has resulted in virtually no basis on which the USTPO or courts can deny patent protection to morally controversial, but otherwise patentable, subject matter. This is so despite position statements by the Agency to the contrary. Biotechnology is an area in which many morally controversial inventions are generated. Congress has been in react-mode following the issuance of a stream of morally controversial biotech patents, including patents on transgenic animals, surgical methods, and methods of cloning humans. With no statutory limits on patent eligibility, and with myriad concerns complicating congressional action following a patent's issuance, it is not Congress, the representative of the people, determining patent eligibility. Instead, it is patent applicants, scientific inventors, who are deciding matters of high public policy through the contents of the applications they file with the USTPO. This Article

  15. To succeed with invention and patent which are my own idea

    International Nuclear Information System (INIS)

    Yu, Jae Bok

    1999-07-01

    This book introduces how to invent through various way such as successful story about the effect to invent, conception like everyone can be a inventor and this is invention. This book also explains all of process of patent such as application of patent, patent in Korea, Japan, the U.S and other countries, what is patent information, how to hunt patent, intellectual property right, priority system, international patent application is possible in Korea, other common sense on patent application, patent as a great power and questions and answers on patent.

  16. 78 FR 2960 - Request for Comments on Preparation of Patent Applications

    Science.gov (United States)

    2013-01-15

    ... seeking public comment on advantages and disadvantages of applicants employing the following practices... comments on advantages and disadvantages of applicants employing the following practices when preparing... the specification and/or claims, particularly for inventions related to certain technologies, such as...

  17. Mixture Design and Its Application in Cement Solidification for Spent Resin

    International Nuclear Information System (INIS)

    Gan, Xueying; Lin, Meiqing; Chen, Hui

    1994-01-01

    The study is aimed to assess the usefulness of the mixture design for spent resin immobilization in cement. Although a considerable amount of research has been carried out to determine the limits for the composition of an acceptable resin-cement mixture, no efficient experimental strategy exists that explores the full properties of waste form against composition relationship. In order to gain an overall view, this report introduces the method of mixture design and mixture analysis, and describes the design of experiment of the 5-component mixture with the constraint conditions. The mathematic models of 28-day compressive strength varying with the ingredients are fitted, and the main effect and interaction effect of two ingredients are identified quantitatively along with the graphical interpretation using the response trace plot and contour plots

  18. Do water based resins find their use in radiation cure applications?

    International Nuclear Information System (INIS)

    Ravijst, J.-P.

    1995-01-01

    There is an increasing demand for UV/EB formulation without monomers. Water dilutable oligomers offer one approach to formulations of this type. Several ways to use water as a primary means of reducing oligomer viscosities are reviewed. A number of new water dilutable acrylate resins were prepared having different functionalities and properties. Depending on the structure, viscosity decreases significantly by adding water. Good reactivity, solvent and water resistance were achieved after curing

  19. Engineering study for the treatment of spent ion exchange resin resulting from nuclear process applications

    International Nuclear Information System (INIS)

    Place, B.G.

    1990-09-01

    This document is an engineering study of spent ion exchange resin treatment processes with the purpose of identifying one or more suitable treatment technologies. Classifications of waste considered include all classes of low-level waste (LLW), mixed LLW, transuranic (TRU) waste, and mixed TRU waste. A total of 29 process alternatives have been evaluated. Evaluation parameters have included economic parameters (both total life-cycle costs and capital costs), demonstrated operability, environmental permitting, operational availability, waste volume reduction, programmatic consistency, and multiple utilization. The results of this study suggest that there are a number of alternative process configurations that are suitable for the treatment of spent ion exchange resin. The determinative evaluation parameters were economic variables (total life-cycle cost or capital cost) and waste volume reduction. Immobilization processes are generally poor in volume reduction. Thermal volume reduction processes tend to have high capital costs. There are immobilization processes and thermal volume reduction processes that can treat all classifications of spent ion exchange resin likely to be encountered. 40 refs., 19 figs., 17 tabs

  20. A Database of EPO-Patenting Firms in Denmark

    DEFF Research Database (Denmark)

    Nielsen, Anders Østergaard

    1998-01-01

    The first section gives a brief introduction of the basic stages to be observed by the patent applicant from idea to the patent is granted. Section two presents three examples of how patents are registered in the online patent database INPADOC. Section three accounts for the initial analysis...... of the existing patent stock issued to firms with domicile in Denmark. Sections four and five report the basic characteristics of the EPO-patent sample and the procedures for linking the patent statistics to accounting data at the firm level, and finally they present the basic properties of the resulting database...

  1. Patent Law for Computer Scientists

    Science.gov (United States)

    Closa, Daniel; Gardiner, Alex; Giemsa, Falk; Machek, Jörg

    More than five centuries ago the first patent statute was passed by the Venetian senate. It already had most of the features of modern patent law, recognizing the public interest in innovation and granting exclusive right in exchange for a full disclosure. Some 350 years later the industrial revolution led to globalisation. The wish to protect intellectual property on a more international level evolved and supranational treaties were negotiated. Patent laws are still different in many countries, however, and inventors are sometimes at a loss to understand which basic requirements should be satisfied if an invention is to be granted a patent. This is particularly true for inventions implemented on a computer. While roughly a third of all applications (and granted patents) relate, in one way or another, to a computer, applications where the innovation mainly resides in software or in a business method are treated differently by the major patent offices. The procedures at the USPTO, JPO and EPO and, in particular, the differences in the treatment of applications centring on software are briefly explained. In later sections of this book, a wealth of examples will be presented. The methodology behind the treatment of these examples is explained.

  2. Application of a weak base anion exchange resin for recovery of uranium at Uravan, Colorado, U.S.A

    International Nuclear Information System (INIS)

    Gardner, N.E.; Kunin, R.

    1976-01-01

    Resin ion-exchange technology has been used to recover uranium at the Uravan, Colorado plant for over 18 years; however, since the end of U.S. Atomic Energy Commission purchase of U 3 O 8 concentrate in 1970, it has become necessary to develop techniques for upgrading the product to meet the more stringent specifications of private sales. The standard gel type quaternary ammonium anion exchange resin had been used previously. The development of the tertiary amine anion exchange resin, Amberlite XE-299, led to an experimental program of laboratory and pilot plant work to evaluate the resin on actual plant solutions. General information on ion-exchange resin structure and chemistry is discussed. Summary data of specific test work on loading the resin, various elution schemes, resin regeneration and product purity from the pilot plant tests and comments on actual plant operation using Amberlite XE-299 resin are presented. (author)

  3. How patent experts create patent breadth

    DEFF Research Database (Denmark)

    Beukel, Karin

    2014-01-01

    Science as an input to patented inventions is a fundamental of economic growth. However, our understanding of how science is transformed into patents is limited. In the present paper I seek to fill this gap by examining the micro-foundations of science-patent transformations. Using an inductive......, grounded theory approach to study the transformation of 12 scientific discoveries into patents I recast the relationship between science and patents: I show it as a particular process that affects patent breadth. Exploiting surplus patent breadth depends on the processes of abstraction and cognitive...... variety, which can be mobilized by patenting experts. The theory is tested using a recently published algebraic interpretive method for examining causal relationships in small-N studies....

  4. How patent experts create patent breadth

    DEFF Research Database (Denmark)

    Beukel, Karin

    2018-01-01

    Science as an input to patented inventions is a fundamental of economic growth. However, our understanding of how science is transformed into patents is limited. In the present paper I seek to fill this gap by examining the micro-foundations of science-patent transformations. Using an inductive......, grounded theory approach to study the transformation of 12 scientific discoveries into patents I recast the relationship between science and patents: I show it as a particular process that affects patent breadth. Exploiting surplus patent breadth depends on the processes of abstraction and cognitive...... variety, which can be mobilized by patenting experts. The theory is tested using a recently published algebraic interpretive method for examining causal relationships in small-N studies....

  5. Development of palm oil-based UV-curable epoxy acrylate and urethane acrylate resins for wood coating application

    International Nuclear Information System (INIS)

    Tajau, Rida; Mahmood, Mohd Hilmi; Salleh, Mek Zah; Salleh, Nik Ghazali Nik; Ibrahim, Mohammad Izzat; Yunus, Nurulhuda Mohd

    2014-01-01

    The trend of using renewable sources such as palm oil as raw material in radiation curing is growing due to the demand from the market to produce a more environmental friendly product. In this study, the radiation curable process was done using epoxy acrylate and urethane acrylate resins which are known as epoxidised palm olein acrylate (EPOLA) and palm oil based urethane acrylate (POBUA), respectively. The purpose of the study was to investigate curing properties and the application of this UV-curable palm oil resins for wood coating. Furthermore, the properties of palm oil based coatings are compared with the petrochemical-based compound such as ebecryl (EB) i.e. EB264 and EB830. From the experiment done, the resins from petrochemical-based compounds resulted higher degree of crosslinking (up to 80%) than the palm oil based compounds (up to 70%), where the different is around 10-15%. The hardness property from this two type coatings can reached until 50% at the lower percentage of the oligomer. However, the coatings from petrochemical-based have a high scratch resistance as it can withstand at least up to 3.0 Newtons (N) compared to the palm oil-based compounds which are difficult to withstand the load up to 1.0 N. Finally, the test on the rubber wood substrate showed that the coatings containing benzophenone photoinitiator give higher adhesion property and their also showed a higher glosiness property on the glass substrate compared to the coatings containing irgacure-819 photoinitiator. This study showed that the palm oil coatings can be a suitable for the replacement of petrochemicals compound for wood coating. The palm oil coatings can be more competitive in the market if the problems of using high percentage palm oil oligomer can be overcome as the palm oil price is cheap enough

  6. Development of palm oil-based UV-curable epoxy acrylate and urethane acrylate resins for wood coating application

    International Nuclear Information System (INIS)

    Rida Tajau; Nurulhuda Mohd Yunus; Mohd Hilmi Mahmood; Mek Zah Salleh; Nik Ghazali Nik Salleh

    2013-01-01

    Full-text: The trend of using renewable sources such as palm oil as raw material in radiation curing is growing due to the demand from the market to produce a more environmental friendly product. In this study, the radiation curable process was done using epoxy acrylate and urethane acrylate resins which are known as epoxidized palm olein acrylate (EPOLA) and palm oil based urethane acrylate (POBUA), respectively. The purpose of the study was to investigate curing properties and the application of this UV-curable palm oil resins for wood coating. Furthermore, the properties of palm oil based coatings are compared with the petrochemical-based compound such as ebecryl (EB) for example EB264 and EB830. From the experiment done, the resins from petrochemical-based compounds resulted higher degree of crosslinking (up to 80 %) than the palm oil based compounds (up to 70 %), where the different is around 10-15 %. The hardness property from this two type coatings can reached until 50 % at the lower percentage of the oligomer. However, the coatings from petrochemical-based have a high scratch resistance as it can withstand at least up to 3.0 Newton's (N) compared to the palm oil-based compounds which are difficult to withstand the load up to 1.0 N. Finally, the test on the rubber wood substrate showed that the coatings containing benzophenone photo initiator give higher adhesion property and their also showed a higher glossiness property on the glass substrate compared to the coatings containing irgacure-819 photo initiator. This study showed that the palm oil coatings can be a suitable for the replacement of petrochemicals compound for wood coating. The palm oil coatings can be more competitive in the market if the problems of using high percentage palm oil oligomer can be overcome as the palm oil price is cheap enough. (author)

  7. Development of palm oil-based UV-curable epoxy acrylate and urethane acrylate resins for wood coating application

    Energy Technology Data Exchange (ETDEWEB)

    Tajau, Rida; Mahmood, Mohd Hilmi; Salleh, Mek Zah; Salleh, Nik Ghazali Nik [Radiation Processing Technology Division, Malaysian Nuclear Agency (Nuclear Malaysia), Bangi, 43000 Kajang, Selangor (Malaysia); Ibrahim, Mohammad Izzat [Faculty of Science, University of Malaya (UM), 50603 Kuala Lumpur (Malaysia); Yunus, Nurulhuda Mohd [Faculty of Science and Technology, National University Malaysia (UKM), 43600 Bangi, Selangor (Malaysia)

    2014-02-12

    The trend of using renewable sources such as palm oil as raw material in radiation curing is growing due to the demand from the market to produce a more environmental friendly product. In this study, the radiation curable process was done using epoxy acrylate and urethane acrylate resins which are known as epoxidised palm olein acrylate (EPOLA) and palm oil based urethane acrylate (POBUA), respectively. The purpose of the study was to investigate curing properties and the application of this UV-curable palm oil resins for wood coating. Furthermore, the properties of palm oil based coatings are compared with the petrochemical-based compound such as ebecryl (EB) i.e. EB264 and EB830. From the experiment done, the resins from petrochemical-based compounds resulted higher degree of crosslinking (up to 80%) than the palm oil based compounds (up to 70%), where the different is around 10-15%. The hardness property from this two type coatings can reached until 50% at the lower percentage of the oligomer. However, the coatings from petrochemical-based have a high scratch resistance as it can withstand at least up to 3.0 Newtons (N) compared to the palm oil-based compounds which are difficult to withstand the load up to 1.0 N. Finally, the test on the rubber wood substrate showed that the coatings containing benzophenone photoinitiator give higher adhesion property and their also showed a higher glosiness property on the glass substrate compared to the coatings containing irgacure-819 photoinitiator. This study showed that the palm oil coatings can be a suitable for the replacement of petrochemicals compound for wood coating. The palm oil coatings can be more competitive in the market if the problems of using high percentage palm oil oligomer can be overcome as the palm oil price is cheap enough.

  8. Improved magnetic encoding device and method for making the same. [Patent application

    Science.gov (United States)

    Fox, R.J.

    A magnetic encoding device and method for making the same are provided for use as magnetic storage media in identification control applications that give output signals from a reader that are of shorter duration and substantially greater magnitude than those of the prior art. Magnetic encoding elements are produced by uniformly bending wire or strip stock of a magnetic material longitudinally about a common radius to exceed the elastic limit of the material and subsequently mounting the material so that it is restrained in an unbent position on a substrate of nonmagnetic material. The elements are spot weld attached to a substrate to form a binary coded array of elements according to a desired binary code. The coded substrate may be enclosed in a plastic laminate structure. Such devices may be used for security badges, key cards, and the like and may have many other applications. 7 figures.

  9. Microwave and thermal curing of an epoxy resin for microelectronic applications

    Energy Technology Data Exchange (ETDEWEB)

    Johnston, K. [Institute of Chemical Sciences, School of Engineering and Physical Sciences, Heriot-Watt University, Edinburgh EH14 4AS (United Kingdom); Pavuluri, S.K.; Leonard, M.T.; Desmulliez, M.P.Y. [MIcroSystems Engineering Centre (MISEC), Institute of Signals, Sensors and Systems, School of Engineering and Physical Sciences, Heriot-Watt University, Edinburgh EH14 4AS (United Kingdom); Arrighi, V., E-mail: v.arrighi@hw.ac.uk [Institute of Chemical Sciences, School of Engineering and Physical Sciences, Heriot-Watt University, Edinburgh EH14 4AS (United Kingdom)

    2015-09-20

    Graphical abstract: - Highlights: • Thermal and microwave curing of a commercial epoxy resin EO1080 are compared. • Microwave curing increases cure rate and does not adversely affect properties. • The curing of EO1080 is generally autocatalytic but deviates at high conversion. • Microwave radiation has a more complex effect on curing kinetics. - Abstract: Microwave curing of thermosetting polymers has a number of advantages to natural or thermal oven curing and is considered a cost-effective alternative. Here we present a detailed study of a commercially available epoxy resin, EO1080. Samples that are thermally cured are compared to curing using a recently developed modular microwave processing system. For commercial purposes it is crucial to demonstrate that microwave curing does not adversely affect the thermal and chemical properties of the material. Therefore, the kinetics of cure and various post cure properties of the resin are investigated. Attenuated Total Reflectance Fourier-Transform Infrared (ATR-FTIR) analysis shows no significant difference between the conventionally and microwave cured samples. Differential scanning calorimetry (DSC) is used to monitor the kinetics of the curing reaction, as well as determine the thermal and ageing properties of the material. As expected, the rate of curing is higher when using microwave energy and we attempt to quantify differences compared to conventional thermal curing. No change in glass transition temperature (T{sub g}) is observed. For the first time, enthalpy relaxation measurements performed on conventional and microwave cured samples are reported and these indicate similar ageing properties at any given temperature under T{sub g}.

  10. Development of a novel resin with antimicrobial properties for dental application

    Directory of Open Access Journals (Sweden)

    Denise Tornavoi de CASTRO

    2014-10-01

    Full Text Available The adhesion of biofilm on dental prostheses is a prerequisite for the occurrence of oral diseases. Objective: To assess the antimicrobial activity and the mechanical properties of an acrylic resin embedded with nanostructured silver vanadate (β-AgVO3. Material and Methods: The minimum inhibitory concentration (MIC of β-AgVO3 was studied in relation to the species Staphylococcus aureus ATCC 25923, Streptococcus mutans ATCC 25175, Pseudomonas aeruginosa ATCC 27853, and Candida albicans ATCC 10231. The halo zone of inhibition method was performed in triplicate to determine the inhibitory effect of the modified self-curing acrylic resin Dencor Lay - Clássico®. The surface hardness and compressive strength were examined. The specimens were prepared according to the percentage of β-AgVO3 (0%-control, 0.5%, 1%, 2.5%, 5%, and 10%, with a sample size of 9x2 mm for surface hardness and antimicrobial activity tests, and 8x4 mm for the compression test. The values of the microbiologic analysis were compared and evaluated using the Kruskal-Wallis test (α=0.05; the mechanical analysis used the Shapiro-Wilk's tests, Levene's test, ANOVA (one-way, and Tukey's test (α=0.05. Results: The addition of 10% β-AgVO3 promoted antimicrobial activity against all strains. The antimicrobial effect was observed at a minimum concentration of 1% for P. aeruginosa, 2.5% for S. aureus, 5% for C. albicans, and 10% for S. mutans. Surface hardness and compressive strength increased significantly with the addition of 0.5% β-AgVO3 (p0.05. Conclusions: The incorporation of β-AgVO3 has the potential to promote antimicrobial activity in the acrylic resin. At reduced rates, it improves the mechanical properties, and, at higher rates, it does not promote changes in the control.

  11. Microwave and thermal curing of an epoxy resin for microelectronic applications

    International Nuclear Information System (INIS)

    Johnston, K.; Pavuluri, S.K.; Leonard, M.T.; Desmulliez, M.P.Y.; Arrighi, V.

    2015-01-01

    Graphical abstract: - Highlights: • Thermal and microwave curing of a commercial epoxy resin EO1080 are compared. • Microwave curing increases cure rate and does not adversely affect properties. • The curing of EO1080 is generally autocatalytic but deviates at high conversion. • Microwave radiation has a more complex effect on curing kinetics. - Abstract: Microwave curing of thermosetting polymers has a number of advantages to natural or thermal oven curing and is considered a cost-effective alternative. Here we present a detailed study of a commercially available epoxy resin, EO1080. Samples that are thermally cured are compared to curing using a recently developed modular microwave processing system. For commercial purposes it is crucial to demonstrate that microwave curing does not adversely affect the thermal and chemical properties of the material. Therefore, the kinetics of cure and various post cure properties of the resin are investigated. Attenuated Total Reflectance Fourier-Transform Infrared (ATR-FTIR) analysis shows no significant difference between the conventionally and microwave cured samples. Differential scanning calorimetry (DSC) is used to monitor the kinetics of the curing reaction, as well as determine the thermal and ageing properties of the material. As expected, the rate of curing is higher when using microwave energy and we attempt to quantify differences compared to conventional thermal curing. No change in glass transition temperature (T g ) is observed. For the first time, enthalpy relaxation measurements performed on conventional and microwave cured samples are reported and these indicate similar ageing properties at any given temperature under T g

  12. Synthesis of multi-walled carbon nanotubes and their application in resin based nanocomposites

    International Nuclear Information System (INIS)

    Ahmad, Shahid Nisar; Hakeem, Saira; Alvi, Rashid Ahmed; Farooq, Khawar; Farooq, Naveed; Yasmin, Farida; Saeed, Sadaf

    2013-01-01

    Multi-walled carbon nanotubes (MWCNTs) were synthesized by catalytic decomposition of hydrocarbon gas using chemical vapor deposition method. Synthesis was done at different growth temperatures and catalyst ratios. These MWCNTs were dispersed in epoxy resin (E-51) and their effect on mechanical strength of epoxy nanocomposites was studied. Increase in the mechanical strength of epoxy was observed with the addition of CNTs. The surface characterization was done by using optical microscope and scanning electron microscope (SEM). Mechanical properties were determined by the general tensile strength testing method.

  13. Metal-doped organic foam and method of making same. [Patent application

    Science.gov (United States)

    Rinde, J.A.

    Organic foams having a low density and very small cell size and method for producing same in either a metal-loaded or unloaded (nonmetal loaded) form are described. Metal-doped foams are produced by soaking a polymer gel in an aqueous solution of desired metal salt, soaking the gel successively in a solvent series of decreasing polarity to remove water from the gel and replace it with a solvent of lower polarity with each successive solvent in the series being miscible with the solvents on each side and being saturated with the desired metal salt, and removing the last of the solvents from the gel to produce the desired metal-doped foam having desired density cell size, and metal loading. The unloaded or metal-doped foams can be utilized in a variety of applications requiring low density, small cell size foam. For example, rubidium-doped foam made in accordance with the invention has utility in special applications, such as in x-ray lasers.

  14. Pre-empted Patents, Infringed Patents and Firms’ Participation in Markets for Technology

    DEFF Research Database (Denmark)

    Grimpe, Christoph; Hussinger, Katrin

    2014-01-01

    In recent years, firms have increasingly contributed to and been confronted with a patent landscape characterized by numerous but marginal inventions, overlapping claims and patent fences. As a result, firms risk their patent applications to be pre-empted or to be infringed upon by rivals. While...... patents on firms’ engagement in in- and cross-licensing. Based on a sample of more than 1100 German manufacturing firms our results show that firms engage in in-licensing as a reaction to pre-empted patents and in cross-licensing if their protected IP was infringed upon. However, these effects vary...

  15. The ethics of patenting human embryonic stem cells.

    Science.gov (United States)

    Chapman, Audrey R

    2009-09-01

    Just as human embryonic stem cell research has generated controversy about the uses of human embryos for research and therapeutic applications, human embryonic stem cell patents raise fundamental ethical issues. The United States Patent and Trademark Office has granted foundational patents, including a composition of matter (or product) patent to the Wisconsin Alumni Research Foundation (WARF), the University of Wisconsin-Madison's intellectual property office. In contrast, the European Patent Office rejected the same WARF patent application for ethical reasons. This article assesses the appropriateness of these patents placing the discussion in the context of the deontological and consequentialist ethical issues related to human embryonic stem cell patenting. It advocates for a patent system that explicitly takes ethical factors into account and explores options for new types of intellectual property arrangements consistent with ethical concerns.

  16. A study of fuel cell patenting activity in Canada

    International Nuclear Information System (INIS)

    Lee, B.Y.; Sajewycz, M.

    2004-01-01

    'Full text:' A patent application is generally filed shortly after completion of research and development; therefore, patent filing statistics provide insight into the state of innovation of a technology. A study has been conducted on fuel cell patenting activity in Canada. This study examines fuel cell patenting trends between 1989-2003 and specific activity in 2001, identifies the major players in the Canadian fuel cell industry, and examines the patent landscape by fuel cell technology. Our results show that historically, Canadians have been leaders at home and abroad in fuel cell innovation. However, Canadians have recently fallen behind in protecting their patent rights at home, and now rank fourth behind German, American and Japanese fuel cell patent filers in the Canadian patent office. However, our data also shows that a significant number of new Canadian entities have emerged and have been very active filing new patent applications. These new entities as well as established Canadian companies are examined in detail. (author)

  17. Device for detecting the specific gravity of a liquid. [Patent application

    Science.gov (United States)

    Derouin, C.R.; Kerwin, W.J.; McCormick, J.B.; Bobbett, R.E.

    1980-11-18

    A device for detecting the specific gravity of a liquid and a device for detecting the state of charge of a liquid phase electrolyte battery are described. In one embodiment of the present invention, a change in the critical angle of total internal reflection is utilized to determine the index of refraction of the liquid to be measured. It is shown that the index of refraction of the liquid is a function of the specific gravity of the liquid. In applications for measuring the state of charge of a battery, the specific gravity is proportional to the state of charge of the battery. A change in intensity of rays intersecting an interface surface indicates the critical angle which is a direct indication of the specific gravity of the liquid and the state of charge of a battery. In another embodiment, a light beam is projected through a transparent medium and then through a portion of the liquid to be measured. A change in refraction due to a change in the index of refraction of the liquid produces a deflection of the beam which is measured by a detector. The magnitude of deflection of the beam is directly proportional to the specific gravity of the liquid and the state of charge of a battery.

  18. 78 FR 70294 - Intent To Grant an Exclusive Patent License

    Science.gov (United States)

    2013-11-25

    ... DEPARTMENT OF DEFENSE Department of the Air Force Intent To Grant an Exclusive Patent License... interest the Air Force has in: U.S. Provisional Patent Application No. 61/354,522, filed on June 14, 2010... Anish Tuteja et al.; U.S. Non-provisional Patent Application No. 13/159,950, filed on June 14, 2011...

  19. 77 FR 48130 - Prospective Grant of Exclusive Patent License

    Science.gov (United States)

    2012-08-13

    ... Exclusive Patent License AGENCY: National Institute of Standards and Technology, Commerce. ACTION: Notice of prospective grant of exclusive patent license. SUMMARY: This is a notice in accordance with 35 U.S.C. 209(e... Provisional Application for Patent Application No. 61,638,362 titled ``Flow Cytometer Systems and Associated...

  20. Patents in INIS

    International Nuclear Information System (INIS)

    Scheel, H.; Breitfeld, B.

    1983-01-01

    Proceeding from the INIS rules for collecting, characterizing, and making available patent documents, results of an analysis are presented, which concern timeliness, origin, and classification of patents according to the INIS subject categories and the International Patent Classification. GDR's capabilities for SDI services and retrospective searches are outlined taking into account patents. For a selected subject area (IPC G21) the coverage of patents announced by INIS was found to be about 30%

  1. Robust synthesis of epoxy resin-filled microcapsules for application to self-healing materials.

    Science.gov (United States)

    Bolimowski, Patryk A; Bond, Ian P; Wass, Duncan F

    2016-02-28

    Mechanically and thermally robust microcapsules containing diglycidyl ether bisphenol A-based epoxy resin and a high-boiling-point organic solvent were synthesized in high yield using in situ polymerization of urea and formaldehyde in an oil-in-water emulsion. Microcapsules were characterized in terms of their size and size distribution, shell surface morphology and thermal resistance to the curing cycles of commercially used epoxy polymers. The size distribution of the capsules and characteristics such as shell thickness can be controlled by the specific parameters of microencapsulation, including concentrations of reagents, stirrer speed and sonication. Selected microcapsules, and separated core and shell materials, were analysed using thermogravimetric analysis and differential scanning calorimetry. It is demonstrated that capsules lose minimal 2.5 wt% at temperatures no higher than 120°C. These microcapsules can be applied to self-healing carbon fibre composite structural materials, with preliminary results showing promising performance. © 2016 The Author(s).

  2. Bond Strength of Resin Composite to Dentin with Different Adhesive Systems: Influence of Relative Humidity and Application Time.

    Science.gov (United States)

    Amsler, Fabienne; Peutzfeldt, Anne; Lussi, Adrian; Flury, Simon

    2015-06-01

    To investigate the influence of relative humidity and application time on bond strength to dentin of different classes of adhesive systems. A total of 360 extracted human molars were ground to mid-coronal dentin. The dentin specimens were treated with one of six adhesive systems (Syntac Classic, OptiBond FL, Clearfil SE Bond, AdheSE, Xeno Select, or Scotchbond Universal), and resin composite (Filtek Z250) was applied to the treated dentin surface under four experimental conditions (45% relative humidity/application time according to manufacturers' instructions; 45% relative humidity/reduced application time; 85% relative humidity/application time according to manufacturers' instructions; 85% relative humidity/reduced application time). After storage (37°C, 100% humidity, 24 h), shear bond strength (SBS) was measured and data analyzed with nonparametric ANOVA followed by Kruskal-Wallis tests and Mann-Whitney U-tests with Bonferroni-Holm correction for multiple testing (level of significance: α = 0.05). Increased relative humidity and reduced application time had no effect on SBS for Clearfil SE Bond and Scotchbond Universal (p = 1.00). For Syntac Classic, OptiBond FL, AdheSE, and Xeno Select there was no effect on SBS of reduced application time of the adhesive system (p ≥ 0.403). However, increased relative humidity significantly reduced SBS for Syntac Classic, OptiBond FL, and Xeno Select irrespective of application time (p ≤ 0.003), whereas for AdheSE, increased relative humidity significantly reduced SBS at recommended application time only (p = 0.002). Generally, increased relative humidity had a detrimental effect on SBS to dentin, but reduced application time had no effect.

  3. Digital pathology: A systematic evaluation of the patent landscape

    Directory of Open Access Journals (Sweden)

    Ioan C. Cucoranu

    2014-01-01

    Full Text Available Introduction: Digital pathology is a relatively new field. Inventors of technology in this field typically file for patents to protect their intellectual property. An understanding of the patent landscape is crucial for companies wishing to secure patent protection and market dominance for their products. To our knowledge, there has been no prior systematic review of patents related to digital pathology. Therefore, the aim of this study was to systematically identify and evaluate United States patents and patent applications related to digital pathology. Materials and Methods: Issued patents and patent applications related to digital pathology published in the United States Patent and Trademark Office (USPTO database (www.uspto.gov (through January 2014 were searched using the Google Patents search engine (Google Inc., Mountain View, California, USA. Keywords and phrases related to digital pathology, whole-slide imaging (WSI, image analysis, and telepathology were used to query the USPTO database. Data were downloaded and analyzed using the Papers application (Mekentosj BV, Aalsmeer, Netherlands. Results: A total of 588 United States patents that pertain to digital pathology were identified. In addition, 228 patent applications were identified, including 155 that were pending, 65 abandoned, and eight rejected. Of the 588 patents granted, 348 (59.18% were specific to pathology, while 240 (40.82% included more general patents also usable outside of pathology. There were 70 (21.12% patents specific to pathology and 57 (23.75% more general patents that had expired. Over 120 unique entities (individual inventors, academic institutions, and private companies applied for pathology specific patents. Patents dealt largely with telepathology and image analysis. WSI related patents addressed image acquisition (scanning and focus, quality (z-stacks, management (storage, retrieval, and transmission of WSI files, and viewing (graphical user interface (GUI

  4. Digital pathology: A systematic evaluation of the patent landscape.

    Science.gov (United States)

    Cucoranu, Ioan C; Parwani, Anil V; Vepa, Suryanarayana; Weinstein, Ronald S; Pantanowitz, Liron

    2014-01-01

    Digital pathology is a relatively new field. Inventors of technology in this field typically file for patents to protect their intellectual property. An understanding of the patent landscape is crucial for companies wishing to secure patent protection and market dominance for their products. To our knowledge, there has been no prior systematic review of patents related to digital pathology. Therefore, the aim of this study was to systematically identify and evaluate United States patents and patent applications related to digital pathology. Issued patents and patent applications related to digital pathology published in the United States Patent and Trademark Office (USPTO) database (www.uspto.gov) (through January 2014) were searched using the Google Patents search engine (Google Inc., Mountain View, California, USA). Keywords and phrases related to digital pathology, whole-slide imaging (WSI), image analysis, and telepathology were used to query the USPTO database. Data were downloaded and analyzed using the Papers application (Mekentosj BV, Aalsmeer, Netherlands). A total of 588 United States patents that pertain to digital pathology were identified. In addition, 228 patent applications were identified, including 155 that were pending, 65 abandoned, and eight rejected. Of the 588 patents granted, 348 (59.18%) were specific to pathology, while 240 (40.82%) included more general patents also usable outside of pathology. There were 70 (21.12%) patents specific to pathology and 57 (23.75%) more general patents that had expired. Over 120 unique entities (individual inventors, academic institutions, and private companies) applied for pathology specific patents. Patents dealt largely with telepathology and image analysis. WSI related patents addressed image acquisition (scanning and focus), quality (z-stacks), management (storage, retrieval, and transmission of WSI files), and viewing (graphical user interface (GUI), workflow, slide navigation and remote control). An

  5. The differences of saliva pH before and after application of Bis-GMA resin based-pit and fissure sealant

    Directory of Open Access Journals (Sweden)

    Ayub Irmadani Anwar

    2016-06-01

    Full Text Available Pit and fissure sealant applications is one way to prevent caries. One of the effective ingredient as a pit and fissure sealant is a Bis-GMA resin. One of the active components  of  Bis-GMA  resin  is  sodium  fluoride,  which is capable  of releasing fluoride ions to the tooth surface and able to improve the repair and remineralization process through the replacement  of  calcium and phosphate ions found in saliva to increase the pH of saliva. This study was to determine the effect of pit and fissure sealant applications made from Bis-GMA resin to pH of saliva in children aged 6-12 years. The study design is pre and post test with control group design. Saliva samples were derived from 15 pediatric patients has met the criteria. The pH of saliva were taken before and after the application of pit and fissure sealant made from Bis-GMA and measured with pH meter. This study used a non-parametric test, the Wilcoxon Signed Rank test. The results of this study are also supported by the results of statistical tests showed p-: 0.005 (p<0.05 value, which means that there are significant differences in pH of saliva before and after the application of pit and fissure sealant made from Bis-GMA resin.

  6. 台灣地區專利指標應用之書目計量學研究 Bibliometrics Analysis of Patent Indicators’ Application in Taiwan

    Directory of Open Access Journals (Sweden)

    Chun-Chi Liang

    2009-09-01

    Full Text Available 十五年來專利指標研究文獻逐年成長,但是,至今尚無相關文獻對 專利指標進行系統性與全面性的了解。因此,本研究整理分析台灣 地區專利指標之研究與實證現況之文獻,期做為後續專利指標修訂、 研究與應用之參考。本研究利用專家常用關鍵字群進行檢索,再經 由文獻分析與內容分析方法,進行專利指標相關研究文獻之統計, 比較文獻歷年概況、學門與產業或企業類別之專利指標使用。本研 究結論為:(1專利指標使用多元,且研究者常使用多個專利組合指 標;(2台灣地區專利指標相關研究文獻量仍有成長空間;(3台灣地 區進行專利指標相關主要研究團隊有七組;(4學界使用專利指標與 財務績效連結並不明顯;(5國立大學在政府研究資訊系統獲得較多 的計畫支持;(6專利指標實證研究對象產業符合政府高科技政策規 劃;(7以書目計量學的方法來分析專利資訊是目前較具可信度做法; 過去台灣地區專利指標使用大都屬於單一產業實證,本研究為台灣 地區首次針對專利指標相關文獻進行統計,可供後續興趣研究者ㄧ 窺專利指標研究發展的脈絡。The past 15 years (1995-2009 witnessed an annual growth of the literature on patent indicators. However, no research was done to examine the patent indicators systematically and comprehensively. This paper reviewed the literature and current application of patent indicators in Taiwan to provide references for the future revision, application, and studies. The researchers first searched the literature using the expert keywords group; then studied the key literature by content analysis, such as using statistics to compare the publications and the application of patent indicators in industries. The findings are as follows: (1 The ways that patent indicators have been used are various and researchers usually combine multiple indicators to

  7. US Photovoltaic Patents, 1988--1990

    Energy Technology Data Exchange (ETDEWEB)

    1991-12-01

    This document contains US patents on terrestrial photovoltaic (PV) power applications, including systems, components, and materials, as well as manufacturing and support functions. The patent entries in this document were issued from 1988 through 1990. The entries were located by searching USPA, the data base of the US Patent Office. The final search retrieved all patents under the class ``Batteries, Thermoelectric and Photoelectric`` and the subclasses ``Photoelectric,`` ``Testing,`` and ``Applications.`` The search also located patents that contained the words ``photovoltaic(s)`` or ``solar cell(s)`` and their derivatives. A manual search of the patents in the Solar Energy Research Institute (SERI) patent file augmented the data base search. After the initial list was compiled, most of the patents on the following subjects were excluded: space photovoltaic technology, use of the photovoltaic effect for detectors and subjects only peripherally concerned with photovoltaics. Some patents on these three subjects were included when it appeared that those inventions might be of use in terrestrial PV power technologies.

  8. US Photovoltaic Patents, 1988--1990

    Energy Technology Data Exchange (ETDEWEB)

    1991-12-01

    This document contains US patents on terrestrial photovoltaic (PV) power applications, including systems, components, and materials, as well as manufacturing and support functions. The patent entries in this document were issued from 1988 through 1990. The entries were located by searching USPA, the data base of the US Patent Office. The final search retrieved all patents under the class Batteries, Thermoelectric and Photoelectric'' and the subclasses Photoelectric,'' Testing,'' and Applications.'' The search also located patents that contained the words photovoltaic(s)'' or solar cell(s)'' and their derivatives. A manual search of the patents in the Solar Energy Research Institute (SERI) patent file augmented the data base search. After the initial list was compiled, most of the patents on the following subjects were excluded: space photovoltaic technology, use of the photovoltaic effect for detectors and subjects only peripherally concerned with photovoltaics. Some patents on these three subjects were included when it appeared that those inventions might be of use in terrestrial PV power technologies.

  9. Analysis of Patent Databases Using VxInsight

    Energy Technology Data Exchange (ETDEWEB)

    BOYACK,KEVIN W.; WYLIE,BRIAN N.; DAVIDSON,GEORGE S.; JOHNSON,DAVID K.

    2000-12-12

    We present the application of a new knowledge visualization tool, VxInsight, to the mapping and analysis of patent databases. Patent data are mined and placed in a database, relationships between the patents are identified, primarily using the citation and classification structures, then the patents are clustered using a proprietary force-directed placement algorithm. Related patents cluster together to produce a 3-D landscape view of the tens of thousands of patents. The user can navigate the landscape by zooming into or out of regions of interest. Querying the underlying database places a colored marker on each patent matching the query. Automatically generated labels, showing landscape content, update continually upon zooming. Optionally, citation links between patents may be shown on the landscape. The combination of these features enables powerful analyses of patent databases.

  10. Intellectual Property Strategies of Multinational Companies Patenting in China

    DEFF Research Database (Denmark)

    Wolfram, Pierre; Schuster, Gerd; Brem, Alexander

    2014-01-01

    While global intellectual property trends show a stable rate of worldwide patent applications during the last five years, patent applications in emerging economies strongly increased within the same period. Unless the increasing number of applications in emerging economies, the indigenous legal...... archetypes of the world’s largest patent applicants using the case of China as an empirical context. Using Questel’s professional patent search application Orbit, we build a unique data set of the world’s top patent applicants combining data from the World Intellectual Property Organization and the State...... Intellectual Property Office of China comprising data of about 620.000 patents. Referring to the study of Keupp et al. (2012), we extend previous qualitative studies on patenting strategy archetypes by adding quantitative evidence from a data set of the world’s largest intellectual property owners. Model based...

  11. Argonne National Laboratory patent portfolio

    International Nuclear Information System (INIS)

    Huguelet, B.C.

    1976-01-01

    This booklet contains the abstracts of all active U. S. patents on technology items that originated at ANL, the applicability of which is not limited to nuclear reactors. Also listed are the titles of all ANL-originated nuclear-related U. S. patents that are still in force. Selected technology items for which patent applications have been filed and are available for licensing are included in several categories. Categories included in this booklet are as follows: atmospheric and earth sciences; biological and medical sciences; chemistry and chemical engineering; cryogenics and superconductivity; electronics and electrical engineering; energy conversion; measurements and controls; methods and devices; materials and fabrication; physics, accelerators and fusion; and selected nuclear-related technology

  12. DOE patents available for licensing: a bibliography

    International Nuclear Information System (INIS)

    Thoeming, G.H.

    1982-06-01

    Abstracts and indexes are provided for 1344 DOE patents or patent applications concerning any aspect of energy production, conservation, and utilization. The entries are arranged by subject category as shown in the table of contents. The bibliography covers the period from January 1974 through December 1980

  13. Effect of chlorhexidine application on the bond strength of resin core to axial dentin in endodontic cavity

    Directory of Open Access Journals (Sweden)

    Yun-Hee Kim

    2012-11-01

    Full Text Available Objectives This study evaluated the influence of chlorhexidine (CHX on the microtensile bonds strength (µTBS of resin core with two adhesive systems to dentin in endodontic cavities. Materials and Methods Flat dentinal surfaces in 40 molar endodontic cavities were treated with self-etch adhesive system, Contax (DMG and total-etch adhesive system, Adper Single Bond 2 (3M ESPE after the following surface treatments: (1 Priming only (Contax, (2 CHX for 15 sec + rinsing + priming (Contax, (3 Etching with priming (Adper Single Bond 2, (4 Etching + CHX for 15 sec + rinsing + priming (Adper Single Bond 2. Resin composite build-ups were made with LuxaCore (DMG using a bulk method and polymerized for 40 sec. For each condition, half of specimens were submitted to µTBS after 24 hr storage and half of them were submitted to thermocycling of 10,000 cycles between 5℃ and 55℃ before testing. The data were analyzed using ANOVA and independent t-test at a significance level of 95%. Results CHX pre-treatment did not affect the bond strength of specimens tested at the immediate testing period, regardless of dentin surface treatments. However, after 10,000 thermocycling, all groups showed reduced bond strength. The amount of reduction was greater in groups without CHX treatments than groups with CHX treatment. These characteristics were the same in both self-etch adhesive system and total-etch adhesive system. Conclusions 2% CHX application for 15 sec proved to alleviate the decrease of bond strength of dentin bonding systems. No significant difference was shown in µTBS between total-etching system and self-etching system.

  14. SIMPLE METHOD TO PRODUCE NANOPOROUS CARBON FOR VARIOUS APPLICATIONS BY PYROLYSIS OF SPECIALLY SYNTHESIZED PHENOLIC RESIN

    Directory of Open Access Journals (Sweden)

    Imam Prasetyo

    2013-08-01

    Full Text Available Nanoporous carbon materials, a unique and useful material, have been widely used in many technologies such as separation processes, catalysis, energy storage, gas storage, energy conversion, etc. due to its high specific surface area and tunable porosity. In this research, nanoporous carbons were prepared using simple and innovative approach based on structural array of phenolic resin polymer without activation during carbonization process. The effect of phenolic reactant type and composition on pore structure and carbon surface morphologies was studied. Nanoporous carbon derived from resorcinol formaldehyde (RF and from resorcinol phenol formaldehyde (RPF polymers was suitable for electrode material supercapacitor and CO2 capture medium. RF-derived and RPF-derived carbons provide electrode material supercapacitor with specific capacitance up to 246 F/g, whereas carbonized RPF exhibited CO2 uptake of 10.63 mmol/g (at 3.5 MPa 298 K. Nanoporous carbon derived from resorcinol para-tert-butyl phenol formaldehyde (RTBPF polymer exhibited attractive characteristics as methane storage media with methane uptake capacity as high as 8.98 mmol/g (at 3.5 MPa 298 K.

  15. Merger of waste of lead in polyester resin for application of protection barriers

    International Nuclear Information System (INIS)

    Barros, Frieda Saicla; Paredes, Ramon Siguifredo Cortes

    2010-01-01

    This paper's main objective is the use of powdered lead waste obtained from the recycling of batteries embedded in polyester resin to be used as a protective barrier in environments subject to radiation. The aim is to enable a more economical procedure which is faster and more practical for use in walls where it is necessary to use protective barrier. This justification is reinforced having in sight the use of byproducts generated by industries, recycling them and using them as components in the development of barriers against ionizing radiation. In this study, we observed the morphological and physical-chemical properties of isolated and associated materials and performance analysis of the composite with respect to the attenuation properties for gamma rays, by means of experimental tests. For mixtures with 40% of waste lead, value referenced in mass, we obtained satisfactory results on the screen. Thus, we were able to combine the good performance of the composite with the reduction of environmental liabilities, in view of the recycling process of lead. (author)

  16. Resin composites

    DEFF Research Database (Denmark)

    Benetti, Ana Raquel; Peutzfeldt, Anne; Lussi, Adrian

    2014-01-01

    OBJECTIVE: To investigate how the modulus of elasticity of resin composites influences marginal quality in restorations submitted to thermocyclic and mechanical loading. METHODS: Charisma, Filtek Supreme XTE and Grandio were selected as they were found to possess different moduli of elasticity...... of resin composite (p=0.81) on the quality of dentine margins was observed, before or after loading. Deterioration of all margins was evident after loading (p....008). CONCLUSIONS: The resin composite with the highest modulus of elasticity resulted in the highest number of gap-free enamel margins but with an increased incidence of paramarginal enamel fractures. CLINICAL SIGNIFICANCE: The results from this study suggest that the marginal quality of restorations can...

  17. Litigation-proof patents: avoiding the most common patent mistakes

    National Research Council Canada - National Science Library

    Goldstein, Larry M

    2014-01-01

    "Litigation-Proof Patents: Avoiding the Most Common Patent Mistakes explains the principles of excellent patents, presents the ten most common errors in patents, and details a step-by-step method for avoiding these common errors...

  18. Effect of sonic application mode on the resin-dentin bond strength and dentin permeability of self-etching systems.

    Science.gov (United States)

    Mena-Serrano, Alexandra; Costa, Thays Regina Ferreira da; Patzlaff, Rafael Tiago; Loguercio, Alessandro Dourado; Reis, Alessandra

    2014-10-01

    To compare manual and sonic adhesive application modes in terms of the permeability and microtensile bond strength of a self-etching adhesive applied in the one-step or two-step protocol. Self-etching All Bond SE (Bisco) was applied as a one- or a two-step adhesive under manual or sonic vibration modes on flat occlusal dentin surfaces of 64 human molars. Half of the teeth were used to measure the hydraulic conductance of dentin at 200 cm H₂O hydrostatic pressure for 5 min immediately after the adhesive application. In the other half, composite buildups (Opallis) were constructed incrementally to create resin-dentin sticks with a cross-sectional area of 0.8 mm² to be tested in tension (0.5 mm/min) immediately after restoration placement. Data were analyzed using a two-way ANOVA and Tukey's test (α = 0.05). The fluid conductance of dentin was significantly reduced by the sonic vibration mode for both adhesives, but no effect on the bond strength values was observed for either adhesive. The sonic application mode at an oscillating frequency of 170 Hz can reduce the fluid conductance of the one- and two-step All Bond SE adhesive when applied on dentin.

  19. Should There Be an Obligation of Disclosure of Origin of Genetic Resources in Patent Applications? – Learning Lessons from Developing Countries

    Directory of Open Access Journals (Sweden)

    Graeme Laurie

    2005-06-01

    Full Text Available In the lead-up to two meetings in June 2005 which will address the question of whether there should be an obligation of disclosure of origin of genetic resources in patent applications, this paper uses the on-going international policy debate in this area as a platform both to make some specific observations about this particular issue, and to offer some comments on the broader question which it raises of how the intellectual property world integrates with other legal and ethical regimes.

  20. Herbal drug patenting in India: IP potential.

    Science.gov (United States)

    Sahoo, Niharika; Manchikanti, Padmavati; Dey, Satya Hari

    2011-09-01

    Herbal drugs are gaining worldwide prominence due to their distinct advantages. Developing countries have started exploring the ethnopharmacological approach of drug discovery and have begun to file patents on herbal drugs. The expansion of R&D in Indian herbal research organizations and presence of manufacturing units at non-Indian sites is an indication of the capability to develop new products and processes. The present study attempts to identify innovations in the Indian herbal drug sector by analyzing the patenting trends in India, US and EU. Based on key word and IPC based search at the IPO, USPTO, Esp@cenet and WIPO databases, patent applications and grant in herbal drugs by Indian applicants/assignees was collected for the last ten years (from 1st January 2001 to 31st October 2010). From this collection patents related to human therapeutic use only were selected. Analysis was performed to identify filing trends, major applicants/assignees, disease area and major plant species used for various treatments. There is a gradual increase in patent filing through the years. In India, individual inventors have maximum applications and grants. CSIR, among research organizations and Hindustan Unilever, Avesthagen, Piramal Life Science, Sahajanand Biotech and Indus Biotech among the companies have the maximum granted patents in India, US and EU respectively. Diabetes, cancer and inflammatory disorders are the major areas for patenting in India and abroad. Recent patents are on new herbal formulations for treatment of AIDS, hepatitis, skin disorders and gastrointestinal disorders. A majority of the herbal patents applications and grants in India are with individual inventors. Claim analysis indicates that these patents include novel multi-herb compositions with synergistic action. Indian research organizations are more active than companies in filing for patents. CSIR has maximum numbers of applications not only in India but also in the US and EU. Patents by research

  1. Clinical application of removable partial dentures using thermoplastic resin-part I: definition and indication of non-metal clasp dentures.

    Science.gov (United States)

    Fueki, Kenji; Ohkubo, Chikahiro; Yatabe, Masaru; Arakawa, Ichiro; Arita, Masahiro; Ino, Satoshi; Kanamori, Toshikazu; Kawai, Yasuhiko; Kawara, Misao; Komiyama, Osamu; Suzuki, Tetsuya; Nagata, Kazuhiro; Hosoki, Maki; Masumi, Shin-Ichi; Yamauchi, Mutsuo; Aita, Hideki; Ono, Takahiro; Kondo, Hisatomo; Tamaki, Katsushi; Matsuka, Yoshizo; Tsukasaki, Hiroaki; Fujisawa, Masanori; Baba, Kazuyoshi; Koyano, Kiyoshi; Yatani, Hirofumi

    2014-01-01

    This position paper proposes a definition and naming standard for removable partial dentures (RPDs) using thermoplastic resin, and presents a guideline for clinical application. A panel of 14 experts having broad experience with clinical application of RPDs using thermoplastic resin was selected from members of the Japan Prosthodontic Society. At a meeting of the panel, "non-metal clasp denture" was referred as the generic name of RPDs with retentive elements (resin clasps) made of thermoplastic resin. The panel classified non-metal clasp dentures into two types: one with a flexible structure that lacks a metal framework and the other having a rigid structure that includes a metal framework. According to current prosthetic principles, flexible non-metal clasp dentures are not recommended as definitive dentures, except for limited cases such as patients with a metal allergy. Rigid non-metal clasp dentures are recommended in cases where patients will not accept metal clasps for esthetic reasons. Non-metal clasp dentures should follow the same design principles as conventional RPDs using metal clasps. Copyright © 2013 Japan Prosthodontic Society. Published by Elsevier Ltd. All rights reserved.

  2. Patents - Superconductor materials, processes and devices

    International Nuclear Information System (INIS)

    Test, A.

    1987-01-01

    A patent is a grant by a country to an inventor or his assignee of the right to exclude others for a limited period of time from making, using or selling the patented invention within its territory. It is reported that basic patents have been filed by IBM and the University of Houston to protect a broad range of warm superconducting materials or compounds. It is believed that other researchers are seeking patents to protect related or improved materials, processes and apparatus. Because of the importance of this field and to speed up the patent process, the United States Patent Office is giving, upon request, special expedited status to these patent applications. A survey of Japanese companies shows that more than 1500 patents have been applied for in Japan relating to superconducting materials, compositions, apparatus using superconductors and improvements. It appears that the goal of the Japanese companies is to obtain a patent position in Japan so that they can trade with companies wishing to do business in Japan for rights in other parts of the world

  3. Characterization of ion exchange resins for nuclear power plants: Application and validation of a dedicated model

    International Nuclear Information System (INIS)

    Mabrouk, A.

    2012-01-01

    In pressurized water reactor, ion exchange resins (IER) are used in systems purification. In this thesis, a qualitative study has been performed to predict the behavior of IER while used in nuclear plants conditions. Then, we searched to characterize the IER behavior in column through a quantitative study using analytical solutions. But these solutions worked only for particular cases. In order to find a general solution, we used a new numerical solution: OPTIPUR. To validate this general solution and get a better understanding of the kinetic in column, we performed an experimental study to characterize the resistance to mass transfer in column and to study the sensibility on the parameters influencing this phenomenon. This study is based on the characterization of the initial leakage (initial pollutant concentration at the column outlet). We tested numerous parameters on the initial leakage. We understood the importance of the superficial velocity and indeed of the hydrodynamic conditions on the initial leakage. These numerous results about initial leakage were modeled with an empirical correlation of Dwivedi and Upadhyay in order to validate it. Then, we modeled our results with the two options of OPTIPUR software: option Mass Transfer Coefficient (MTC) and Nernst-Planck (NP). These options encircle experimental results. The MTC option of OPTIPUR gives lower results while those obtained with the NP option are higher than the experimental results. We observed also that only the NP option was valid for a ternary exchange. We proposed solutions to get a better fit with the results obtained with OPTIPUR. We performed other simulations to check the prediction abilities of the software for longer experiments (until the IER saturation). The tendencies were those expected. The OPTIPUR software showed is accuracy and robustness to study column kinetic. (author)

  4. Essential patents in industry standards : the case of UMTS

    NARCIS (Netherlands)

    Bekkers, R.N.A.; Bongard, R.; Nuvolari, A.

    2009-01-01

    We study the determinants of essential patents in industry standards. In particular, we assess the role of two main factors: the significance of the technological solution contained in the patent and the involvement of the applicant of the patent in the standardization process. To this end, we

  5. 77 FR 38771 - Prospective Grant of Exclusive Patent License

    Science.gov (United States)

    2012-06-29

    ... Exclusive Patent License AGENCY: National Institute of Standards and Technology, Department of Commerce. ACTION: Notice of prospective grant of exclusive patent license. SUMMARY: This is a notice in accordance... embodied in U.S. Patent Application No. 13/346,999 titled ``Chirped-Pulse Terahertz Spectroscopy for...

  6. 77 FR 40345 - Intent to Grant an Exclusive Patent License

    Science.gov (United States)

    2012-07-09

    ... DEPARTMENT OF DEFENSE Department of the Air Force Intent to Grant an Exclusive Patent License... William V. Stoecker, Hernan F. Gomez, Jonathan A. Green, and David L. McGlasson; U.S. Patent Number 7,927... David L. McGlasson; U.S. Patent Application Number Serial No. 12/756,875, filed on April 8, 2010...

  7. 77 FR 65673 - Prospective Grant of Exclusive Patent License

    Science.gov (United States)

    2012-10-30

    ... Exclusive Patent License AGENCY: National Institute of Standards and Technology, Commerce. ACTION: Notice of prospective grant of exclusive patent license. SUMMARY: This is a notice in accordance with 35 U.S.C. 209(e.... Patent Application No. 61/625,511 titled ``UV-Assisted Alcohol Sensing with Zinc Oxide Functionalized...

  8. Patents for Soldiers

    Science.gov (United States)

    2016-06-10

    PATENTS FOR SOLDIERS A thesis presented to the Faculty of the U.S. Army Command and General Staff College in partial fulfillment...COVERED (From - To) AUG 2015 – JUNE 2016 4. TITLE AND SUBTITLE Patents for Soldiers 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM...protection of an innovative idea; that is, a patent . A Soldier’s pursuit of patents provides the Army with tangible and intangible benefits. There are on

  9. Uniform interpretation of european patent law with a special view on the creation of a common patent court

    NARCIS (Netherlands)

    Luginbühl, SL

    2009-01-01

    The European Patent Convention (EPC) provides for a common application and examination procedure for European patents. Therefore, European patents are granted on the basis of uniform European law which is applied and interpreted by the EPO, as well as by a great number of national judges and members

  10. 75 FR 34749 - Determination of Regulatory Review Period for Purposes of Patent Extension; BYSTOLIC; U.S. Patent...

    Science.gov (United States)

    2010-06-18

    ... and FDA-2008-E-0267] Determination of Regulatory Review Period for Purposes of Patent Extension; BYSTOLIC; U.S. Patent Nos. 5,759,580 and 6,545,040 AGENCY: Food and Drug Administration, HHS. ACTION... determination because of the submission of applications to the Director of Patents and Trademarks, Department of...

  11. Study of nanostructured clay's application in photoactivated restorative resins, used in dentistry

    International Nuclear Information System (INIS)

    Campos, Luiza Melo de Paiva

    2012-01-01

    The problem caused by polymerization shrinkage is critical, because the resin must remain closely in the tooth cavity while gaining rigidity and decrease its dimensions. Forcing the restorative material to distance or to separate the walls of the cavity, the resulting disruption would lead to microleakage, responsible for other problems such as secondary caries, postoperative soreness and may even cause pulpal changes. This process induces the volumetric change of the compound, given by the union of radicals in the formation of the macromolecule (polymer), causing a decrease in volume. This study aimed to develop new experimental composites through the addition of nano components clay minerals in a polymer matrix-based BisGMA / TEGDMA, to evaluate the possibility of a different dimensional behavior during the polymerization. Were used in this study, experimental composites added nanoparticle clay MMT Cloisite 10A (at concentrations of 50, 55, 60, 65 and 70 wt%) and Cloisite 30B (at concentrations of 50, 55, 60 and 65 wt%), which were then compared with the performance of the experimental composites added with micro-particles of silanized silica hybrid Aerosil OX-50 (at concentrations of 50, 60, 65 and 70 wt%). Was used the methods of characterization: Scanning Electron Microscopy (SEM), Thermal-Mechanical Analysis (TMA), Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), Absorption Spectroscopy in the Region of the Infrared (FTIR), X-ray Diffraction (XRD), Micro Hardness Knoop, Holographic Interferometry Technique (HIT), Digital Holography (DH), Correlation Image (CI) and Thermography. It was observed that the experimental composites with nanoparticles added clay Cloisite 10A and Cloisite 30B, performed better on tests that measured the polymerization shrinkage (TMA, HIT/HD/IC) and the micro hardness (Knoop), in relation to composites added with Silica Aerosil OX-50. These results may be related to the interaction polymer/clay and the nano

  12. Radiotracer application for characterization of nuclear grade anion exchange resins Tulsion A-23 and Dowex SBR LC

    International Nuclear Information System (INIS)

    Singare, P.U.

    2015-01-01

    Radio isotopic tracer technique as one of the versatile nondestructive technique is employed to evaluate the performance of nuclear grade anion exchange resins Tulsion A-23 and Dowex SBR LC. The evaluation was made on the basis of ion-isotopic exchange reaction kinetics by using 131 I and 82 Br radioactive tracer isotopes. It was observed that for both the resins, the values of specific reaction rate (min -1 ), amount of ion exchanged (mmol) and initial rate of ion exchange (mmol/min) were calculated to be lower for bromide ion-isotopic exchange reaction than that for iodide ion-isotopic exchange reaction. It was observed that for iodide ion-isotopic exchange reaction under identical experimental conditions of 30.0 C, 1.000 g of ion exchange resins and 0.001 mol/L labeled iodide ion solution, the values of specific reaction rate (min -1 ), amount of iodide ion exchanged (mmol), initial rate of iodide ion exchange (mmol/min) and log K d were calculated as 0.377, 0.212, 0.080 and 15.5 respectively for Dowex SBR LC resin, which was higher than 0.215, 0.144, 0.031 and 14.1 respectively as that obtained for Tulsion A23 resins. Also at a constant temperature of 30.0 C, as the concentration of labeled iodide ion solution increases from 0.001 mol/L to 0.004 mol/L, the percentage of iodide ions exchanged increases from 84.75 % to 90.20 % for Dowex SBR LC resins which was higher than increases from 57.66 % to 62.38 % obtained for Tulsion A23 resins. The identical trend was observed for the two resins during bromide ion-isotopic exchange reaction. The overall results indicate superior performance of Dowex SBR LC over Tulsion A23 resins under identical experimental conditions.

  13. The effect of continuous application of MDP-containing primer and luting resin cement on bond strength to tribochemical silica-coated Y-TZP.

    Science.gov (United States)

    Lim, Myung-Jin; Yu, Mi-Kyung; Lee, Kwang-Won

    2018-05-01

    This study investigated the effect of continuous application of 10-methacryloyloxydecyldihydrogen phosphate (MDP)-containing primer and luting resin cement on bond strength to tribochemical silica-coated yttria-stabilized tetragonal zirconia polycrystal (Y-TZP). Forty bovine teeth and Y-TZP specimens were prepared. The dentin specimens were embedded in molds, with one side of the dentin exposed for cementation with the zirconia specimen. The Y-TZP specimen was prepared in the form of a cylinder with a diameter of 3 mm and a height of 10 mm. The bonding surface of the Y-TZP specimen was sandblasted with silica-coated aluminium oxide particles. The forty tribochemical silica-coated Y-TZP specimens were cemented to the bovine dentin (4 groups; n = 10) with either an MDP-free primer or an MDP-containing primer and either an MDP-free resin cement or an MDP-containing resin cement. After a shear bond strength (SBS) test, the data were analyzed using 1-way analysis of variance and the Tukey test (α = 0.05). The group with MDP-free primer and resin cement showed significantly lower SBS values than the MDP-containing groups ( p Y-TZP was the best choice among the alternatives tested in this study.

  14. The resin-in-pulp process and its application to ores from Brosses ''BRS 10''; Le procede resin in pulp et son application aux minerais des Brosses ''BRS 10''

    Energy Technology Data Exchange (ETDEWEB)

    Kremer, M

    1959-03-01

    The resin-in-pulp process is a technical variant of the recovery process of uranium in dilute solution by means of ion exchanger resins. An anion resin, XE 123, of a well-defined grain size is placed in direct contact with the pulp produced by sulfuric acid attack on ore with a low uranium content. This process is of particular value in the treatment of pulps that cannot be filtered or decanted, such as those obtained with ore from Brosses. The preparation of the pulp, the elution of the uranium, and its fixation, as well as the various factors encountered in these operations, are discussed. (author) [French] Le procede ''resin in pulp'' est une variante technique du procede de recuperation de l'uranium en solution diluee par les resines echangeuses d'ions. Une resine anionique, la 'XE 123' a granulometrie bien determinee, est mise en contact direct avec la pulpe provenant de l'attaque a l'acide sulfurique d'un minerai d'uranium a faible teneur. Ce procede est particulierement interessant dans le cas de pulpes infiltrables ou indecantables, telles que celles obtenues dans l'attaque du minerai des Brosses. La preparation de la pulpe, la fixation et l'elution de l'uranium, ainsi que les facteurs intervenant dans ces diverses operations sont etudies dans le present rapport. (auteur)

  15. Patent border wars: defining the boundary between scientific discoveries and patentable inventions.

    Science.gov (United States)

    Holman, Christopher M

    2007-12-01

    Drawing an appropriate boundary between unpatentable natural phenomena and patentable inventions is crucial in preventing the patent laws from unduly restricting access to fundamental scientific discoveries. Some would argue that, particularly in the U.S., patents are being issued that purport to claim a novel product or process but that, in effect, encompass any practical application of a fundamental biological principle. Examples include gene patents, which Congress is considering banning, and patents relating to biological correlations and pathways, such as the patents at issue in the headline-grabbing LabCorp v. Metabolite and Ariad v. Eli Lilly litigations. In view of the mounting concern, it seems likely that Congress and/or the courts will address the issue, and perhaps substantially shift the boundary.

  16. Quinoxaline derivatives: a patent review (2006--present).

    Science.gov (United States)

    González, Mercedes; Cerecetto, Hugo

    2012-11-01

    Quinoxaline scaffold is included in a large number of therapeutic agents because of its physicochemical properties that make the difference between them and the carbono analogue, naphthalene. This review of patented products presents the quinoxaline heterocycle as part of the structural patent claims from a medicinal chemistry perspective. We centred our discussion in the various drug patent applications of the quinoxaline and its derivatives. The applications are based firstly in the specific enzyme target with very low development in the disease treatment. Only for cancer and antimicrobial agents they were specifically determined but little is mentioned in order to insight in the last development activities.

  17. Patenting Nanomedicine in Europe:

    DEFF Research Database (Denmark)

    Nordberg, Ana

    Patenting Nanomedicine in Europe: Applying the ‘medical methods exception’ to emerging technologies is based on the authors PhD dissertation, defended in March 2014, at the University of Copenhagen. The book debates restrictions on the patentability of medical methods in European Patent Law....... The main question addressed is whether it is viable and advisable the reinterpretation, reformulation or replacement of Article 53 (c) EPC – a provision restricting the patenting of medical methods. The subject is approached by reference to emerging technologies, and using nanomedicine innovation...... as example and point of departure. Nanotechnology inventions blur the lines between patentable subject matter and what may fall under the exception from patentability. It is a good example of how in recent years, emerging technologies have been challenging the patent system and exposing the need for re...

  18. Formation of carbon nanosheets via simultaneous activation and catalytic carbonization of macroporous anion-exchange resin for supercapacitors application.

    Science.gov (United States)

    Peng, Hui; Ma, Guofu; Sun, Kanjun; Mu, Jingjing; Zhang, Zhe; Lei, Ziqiang

    2014-12-10

    Two-dimensional mesoporous carbon nanosheets (CNSs) have been prepared via simultaneous activation and catalytic carbonization route using macroporous anion-exchange resin (AER) as carbon precursor and ZnCl2 and FeCl3 as activating agent and catalyst, respectively. The iron catalyst in the skeleton of the AER may lead to carburization to form a sheetlike structure during the carbonization process. The obtained CNSs have a large number of mesopores, a maximum specific surface area of 1764.9 m(2) g(-1), and large pore volume of 1.38 cm(3) g(-1). As an electrode material for supercapacitors application, the CNSs electrode possesses a large specific capacitance of 283 F g(-1) at 0.5 A g(-1) and excellent rate capability (64% retention ratio even at 50 A g(-1)) in 6 mol L(-1) KOH. Furthermore, CNSs symmetric supercapacitor exhibits specific energies of 17.2 W h kg(-1) at a power density of 224 W kg(-1) operated in the voltage range of 0-1.8 V in 0.5 mol L(-1) Na2SO4 aqueous electrolyte, and outstanding cyclability (retains about 96% initial capacitance after 5000 cycles).

  19. Internet: A place for patent retrieval

    African Journals Online (AJOL)

    GRACE

    2006-05-16

    May 16, 2006 ... Key words: Biotechnology, intellectual property rights, Patents, Internet application. INTRODUCTION. The principle objective of biotechnology is to produce ... Finland. France. Germany. Greek. Georgian. Hong Kong. Hungarian. Irsish. Italian. Japan. Korean. Luxemberg. Lithuania. Malaysian. Moldova.

  20. Nanotechnology patents in the automotive industry (a quantitative & qualitative analysis).

    Science.gov (United States)

    Prasad, Raghavendra; Bandyopadhyay, Tapas K

    2014-01-01

    The aim of the article is to present a trend in patent filings for application of nanotechnology to the automobile sector across the world, using the keyword-based patent search. Overviews of the patents related to nano technology in the automobile industry have been provided. The current work has started from the worldwide patent search to find the patents on nanotechnology in the automobile industry and classify the patents according to the various parts of an automobile to which they are related and the solutions which they are providing. In the next step various graphs have been produced to get an insight into various trends. In next step, analysis of patents in various classifications, have been performed. The trends shown in graphs provide the quantitative analysis whereas; the qualitative analysis has been done in another section. The classifications of patents based on the solution they provide have been performed by reading the claims, titles, abstract and full texts separately. Patentability of nano technology inventions have been discussed in a view to give an idea of requirements and statutory bars to the patentability of nanotechnology inventions. Another objective of the current work is to suggest appropriate framework for the companies regarding use of nano technology in the automobile industry and a suggestive strategy for patenting of the inventions related to the same. For example, US Patent, with patent number US2008-019426A1 discusses the invention related to Lubricant composition. This patent has been studied and classified to fall under classification of automobile parts. After studying this patent, it is deduced that, the problem of friction in engine is being solved by this patent. One classification is the "automobile part" based while other is the basis of "problem being solved". Hence, two classifications, namely reduction in friction and engine were created. Similarly, after studying all the patents, a similar matrix has been created.

  1. Application of nanoemulsions in the regeneration of adsorbent polymeric resins; Emprego de nanoemulsoes na regeneracao de resinas polimericas adsorvedoras

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Josane A.; Queiros, Yure G.C.; Vieira, Helida V.P.; Lucas, Elizabete F.; Mansur, Claudia R.E. [Universidade Federal do Rio de Janeiro (IMA/UFRJ), RJ (Brazil). Inst. de Macromoleculas. Lab. de Macromoleculas e Coloides na Industria de Petroleo], e-mails: josaneacosta@yahoo.com.br, yuregomes@ima.ufrj.br, elucas@ima.ufrj.br, celias@ima.ufrj.br

    2011-07-01

    In this work, the solbrax/water/polyoxyethylene nanoemulsions were produced under high pressure homogenizer (HPH). These systems presented droplets diameter ranging between 7 to 30 nm. The nanoemulsions were used in regeneration of a polymeric resin, which has been used in treatment of oily water. This resin was contaminated with different kinds of oils. The nanoemulsions presented high cleaning efficiency, above of 90% and its performance was higher than equivalent micellar systems. (author)

  2. Fluorinated epoxy resins with high glass transition temperatures

    Science.gov (United States)

    Griffith, James R.

    1991-01-01

    Easily processed liquid resins of low dielectric constants and high glass transition temperatures are useful for the manufacture of certain composite electronic boards. That combination of properties is difficult to acquire when dielectric constants are below 2.5, glass transition temperatures are above 200 C and processability is of conventional practicality. A recently issued patent (US 4,981,941 of 1 Jan. 1991) teaches practical materials and is the culmination of 23 years of research and effort and 15 patents owned by the Navy in the field of fluorinated resins of several classes. In addition to high fluorine content, practical utility was emphasized.

  3. Biogenic glutamic acid-based resin: Its synthesis and application in the removal of cobalt(II)

    International Nuclear Information System (INIS)

    Jamiu, Zakariyah A.; Saleh, Tawfik A.; Ali, Shaikh A.

    2017-01-01

    Highlights: • A novel resin embedded with metal chelating glutamic acid was synthesized. • The biogenic amino acid residues imparted remarkable efficacy to remove Co(II). • The resin showed excellent ability to remove various metals from wastewater. - Abstract: Inexpensive biogenic glutamic acid has been utilized to synthesize a cross-linked dianionic polyelectrolyte (CDAP) containing metal chelating ligands. Cycloterpolymerization, using azoisobutyronitrile as an initiator, of N,N-diallylglutamic acid hydrochloride, sulfur dioxide and a cross-linker afforded a pH-responsive cross-linked polyzwitterionic acid (CPZA) which upon basification with NaOH was converted into CDAP. The new resin, characterized by a multitude of spectroscopic techniques as well as Scanning Electron Microscopy (SEM) and Brunauer–Emmett–Teller (BET) analyses, was evaluated for the removal of Co(II) as a model case under different conditions. The adsorption capacity of 137 mg g"−"1 does indeed make the resin as one of the most effective sorbents in recent times. The resin leverages its cheap natural source and ease of regeneration in combination with its high and fast uptake capacities to offer a great promise for wastewater treatment. The resin has demonstrated remarkable efficiency in removing toxic metal ions including arsenic from a wastewater sample.

  4. Biogenic glutamic acid-based resin: Its synthesis and application in the removal of cobalt(II)

    Energy Technology Data Exchange (ETDEWEB)

    Jamiu, Zakariyah A.; Saleh, Tawfik A.; Ali, Shaikh A., E-mail: shaikh@kfupm.edu.sa

    2017-04-05

    Highlights: • A novel resin embedded with metal chelating glutamic acid was synthesized. • The biogenic amino acid residues imparted remarkable efficacy to remove Co(II). • The resin showed excellent ability to remove various metals from wastewater. - Abstract: Inexpensive biogenic glutamic acid has been utilized to synthesize a cross-linked dianionic polyelectrolyte (CDAP) containing metal chelating ligands. Cycloterpolymerization, using azoisobutyronitrile as an initiator, of N,N-diallylglutamic acid hydrochloride, sulfur dioxide and a cross-linker afforded a pH-responsive cross-linked polyzwitterionic acid (CPZA) which upon basification with NaOH was converted into CDAP. The new resin, characterized by a multitude of spectroscopic techniques as well as Scanning Electron Microscopy (SEM) and Brunauer–Emmett–Teller (BET) analyses, was evaluated for the removal of Co(II) as a model case under different conditions. The adsorption capacity of 137 mg g{sup −1} does indeed make the resin as one of the most effective sorbents in recent times. The resin leverages its cheap natural source and ease of regeneration in combination with its high and fast uptake capacities to offer a great promise for wastewater treatment. The resin has demonstrated remarkable efficiency in removing toxic metal ions including arsenic from a wastewater sample.

  5. Patent protection and licensing in microfluidics.

    Science.gov (United States)

    Yetisen, Ali K; Volpatti, Lisa R

    2014-07-07

    Microfluidic devices offer control over low-volume samples in order to achieve high-throughput analysis, and reduce turnaround time and costs. Their efficient commercialisation has implications for biomedical sciences, veterinary medicine, environmental monitoring and industrial applications. In particular, market diffusion of microfluidic laboratory and point-of-care diagnostic devices can contribute to the improvement of global health. In their commercialisation, consultancy and patent protection are essential elements that complement academic publishing. The awareness of knowledge transfer strategies can help academics to create value for their research. The aim of this article is to provide a guidance to (1) overview the terminology in patent law, (2) elucidate the process of filing a patent in the US, EU, Japan and internationally, (3) discuss strategies to licence a patent, and (4) explain tactics to defend a patent in a potential infringement. Awareness of the patent law and rights allows obtaining optimised, valid and valuable patents, while accelerating implementation to market route. Striking a balance between academic publishing, consultancy to industry and patent protection can increase commercial potential, enhance economic growth and create social impact.

  6. 37 CFR 1.18 - Patent post allowance (including issue) fees.

    Science.gov (United States)

    2010-07-01

    ... entity $1,190.00 (d) Publication fee $300.00. (e) For filing an application for patent term adjustment... (including issue) fees. 1.18 Section 1.18 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES General Provisions Fees...

  7. To succeed using patent and invention which are brillant idea

    International Nuclear Information System (INIS)

    Yu, Jae Bok

    1999-07-01

    This book deals with what invention is, how we can be a inventor, how we apply inventions to intellectual property office, and other useful advice and lesson on patent. These are the titles of each part : trouble stories on success to invent, everybody can be a inventor, this is a invention. There is a problem when the idea is same or similar, preceding patent, where does it hide? database on patent, patent information, Let's go to Korean intellectual property office, patient application which we misses in our dream, and instructions of patent including various sides.

  8. Annotated chemical patent corpus: a gold standard for text mining.

    Directory of Open Access Journals (Sweden)

    Saber A Akhondi

    Full Text Available Exploring the chemical and biological space covered by patent applications is crucial in early-stage medicinal chemistry activities. Patent analysis can provide understanding of compound prior art, novelty checking, validation of biological assays, and identification of new starting points for chemical exploration. Extracting chemical and biological entities from patents through manual extraction by expert curators can take substantial amount of time and resources. Text mining methods can help to ease this process. To validate the performance of such methods, a manually annotated patent corpus is essential. In this study we have produced a large gold standard chemical patent corpus. We developed annotation guidelines and selected 200 full patents from the World Intellectual Property Organization, United States Patent and Trademark Office, and European Patent Office. The patents were pre-annotated automatically and made available to four independent annotator groups each consisting of two to ten annotators. The annotators marked chemicals in different subclasses, diseases, targets, and modes of action. Spelling mistakes and spurious line break due to optical character recognition errors were also annotated. A subset of 47 patents was annotated by at least three annotator groups, from which harmonized annotations and inter-annotator agreement scores were derived. One group annotated the full set. The patent corpus includes 400,125 annotations for the full set and 36,537 annotations for the harmonized set. All patents and annotated entities are publicly available at www.biosemantics.org.

  9. Evaluation of Brazilian biotechnology patent activity from 1975 to 2010.

    Science.gov (United States)

    Dias, F; Delfim, F; Drummond, I; Carmo, A O; Barroca, T M; Horta, C C; Kalapothakis, E

    2012-08-01

    The analysis of patent activity is one methodology used for technological monitoring. In this paper, the activity of biotechnology-related patents in Brazil were analyzed through 30 International Patent Classification (IPC) codes published by the Organization for Economic Cooperation and Development (OECD). We developed a program to analyse the dynamics of the major patent applicants, countries and IPC codes extracted from the Brazilian Patent Office (INPI) database. We also identified Brazilian patent applicants who tried to expand protection abroad via the Patent Cooperation Treaty (PCT). We had access to all patents published online at the INPI from 1975 to July 2010, including 9,791 biotechnology patent applications in Brazil, and 163 PCTs published online at World Intellectual Property Organization (WIPO) from 1997 to December 2010. To our knowledge, there are no other online reports of biotechnology patents previous to the years analyzed here. Most of the biotechnology patents filed in the INPI (10.9%) concerned measuring or testing processes involving nucleic acids. The second and third places belonged to patents involving agro-technologies (recombinant DNA technology for plant cells and new flowering plants, i.e. angiosperms, or processes for obtaining them, and reproduction of flowering plants by tissue culture techniques). The majority of patents (87.2%) were filed by nonresidents, with USA being responsible for 51.7% of all biotechnology patents deposited in Brazil. Analyzing the resident applicants per region, we found a hub in the southeast region of Brazil. Among the resident applicants for biotechnology patents filed in the INPI, 43.5% were from São Paulo, 18.3% were from Rio de Janeiro, and 9.7% were from Minas Gerais. Pfizer, Novartis, and Sanofi were the largest applicants in Brazil, with 339, 288, and 245 biotechnology patents filed, respectively. For residents, the largest applicant was the governmental institution FIOCRUZ (Oswaldo Cruz

  10. The patent activity of the Czech R

    Directory of Open Access Journals (Sweden)

    Kučera Zdeněk

    2016-12-01

    Full Text Available An effective knowledge transfer between research institutions and industry is a significant bottleneck in the national innovation system. CR adopted in recent years a series of systemic measures aimed to stimulate the orientation of the R&D organizations towards the generation of knowledge directly applicable in the innovation process and more generally to improve the collaboration of the R&D establishment with the industry. In the majority of programs supporting the applied research patents and industrial designs and utility models are among the anticipated results. The Methodology of the evaluation of R&D organizations implemented in the second half of the last decade brought financial bonuses for the creation of the results in the category of industrial property. Despite of this stimulus CR lags behind the technologically advanced EU countries in the patent activities. The topic of this article is a comparison of the protection of the industrial property rights in the Czech higher education institutions and governmental R&D institutions with selected EU countries. We make use of a couple of quantitative indicators to assess the quality and the technological and the commercial potential of the produced industrial property. Despite a dynamic growth of the patent applications in the CR the number of patent applications relative to the country size is far below the EU-15 average. The Czech research organizations contribute to a higher extent to the number of patent applications then do the analogous institutions in EU-15 countries where the majority of patent applications come from the industrial sphere. The Czech research organizations mainly limit the patent rights to the Czech Republic whereas in the EU-15 countries the opposite is preponderant and only a small fraction of patent applications remains limited to the national environment. Thus the majority of the Czech patents created by research organizations cannot be commercialized on the

  11. Performance of Patenting Firms

    DEFF Research Database (Denmark)

    Madsen, Erik Strøjer; Smith, Valdemar; Nielsen, Anders Østergaard

    2000-01-01

    Most countries focus on industries with high technology and the governments grant subsidies to innovating firms. However, there has been remarkable few studies of the performance of innovative firms or industries. This study examines the performance of patent active firms compared to the non-patenting...... firms within the manufacturing sector in Denmark. Performance is measured both by growth in employment as well as in the return on equity and profit share in turnover. The results suggest that differences in performance of patenting and non-patenting firms are very small, which questions the political...

  12. Performance evaluation of anion exchange resins Purolite NRW-5050 and Duolite A-611 by application of radioisotopic techniques

    International Nuclear Information System (INIS)

    Singare, P.U.

    2014-01-01

    Radioanalytical techniques using 131 I and 82 Br as tracer isotopes were applied to study the kinetics of iodide and bromide ion-isotopic exchange reactions taking place between the external labeled ionic solution and the resin surface. The results indicate low values of specific reaction rate (min -1 ), amount of ion exchanged (mmol) and initial rate of ion exchange (mmol/min) for bromide ion-isotopic exchange reaction as compared to that obtained for iodide ion-isotopic exchange reaction. It was observed that for iodide ion-isotopic exchange reaction performed at 35.0 C, 1 000 g of ion exchange resins and 0.002 mol/L labeled iodide ion solution, the values of specific reaction rate (min -1 ), amount of iodide ion exchanged (mmol), initial rate of iodide ion exchange (mmol/min) and log K d were 0.340, 0.394, 0.134 and 20.2 respectively for Purolite NRW-5050 resin, which was higher than the respective values of 0.216, 0.290, 0.063 and 18.2 as that obtained by using Duolite A-611. The results of present investigation indicate that during the two ion-isotopic exchange reactions, for both the resins, there exists a strong positive linear correlation between amount of ions exchanged and concentration of ionic solution; and strong negative correlation between amount of ions exchanged and temperature of exchanging medium. From the results it appears that as compared to Duolite A-611 resins, Purolite NRW-5050 resins shows superior performance under identical experimental conditions.

  13. Chemometrics applications in biotechnology processes: predicting column integrity and impurity clearance during reuse of chromatography resin.

    Science.gov (United States)

    Rathore, Anurag S; Mittal, Shachi; Lute, Scott; Brorson, Kurt

    2012-01-01

    Separation media, in particular chromatography media, is typically one of the major contributors to the cost of goods for production of a biotechnology therapeutic. To be cost-effective, it is industry practice that media be reused over several cycles before being discarded. The traditional approach for estimating the number of cycles a particular media can be reused for involves performing laboratory scale experiments that monitor column performance and carryover. This dataset is then used to predict the number of cycles the media can be used at manufacturing scale (concurrent validation). Although, well accepted and widely practiced, there are challenges associated with extrapolating the laboratory scale data to manufacturing scale due to differences that may exist across scales. Factors that may be different include: level of impurities in the feed material, lot to lot variability in feedstock impurities, design of the column housing unit with respect to cleanability, and homogeneity of the column packing. In view of these challenges, there is a need for approaches that may be able to predict column underperformance at the manufacturing scale over the product lifecycle. In case such an underperformance is predicted, the operators can unpack and repack the chromatography column beforehand and thus avoid batch loss. Chemometrics offers one such solution. In this article, we present an application of chemometrics toward the analysis of a set of chromatography profiles with the intention of predicting the various events of column underperformance including the backpressure buildup and inefficient deoxyribonucleic acid clearance. Copyright © 2012 American Institute of Chemical Engineers (AIChE).

  14. Analytical characterization of a loading resin containing chlorophosphonazo I and its application to the enrichment of trace uranium

    International Nuclear Information System (INIS)

    Tang Fulong; Mao Xueqin

    1986-01-01

    A loading resin containing chlorophosphonazo I was prepared. The analytical properties of this resin for uranium were studied by the batch and column methods. In case EDTA is used as a masking agent, this method can be successfully applied to the separation and enrichment of trace uranium in wastewater from mining. The uranium adsorbed can be eluted with 1.5N HCl, and determined using the arsenazo III at pH 2 by spectrophotometry. The result obtained agrees well with that of the conventional method

  15. EDF specifications on nuclear grade resins

    International Nuclear Information System (INIS)

    Mascarenhas, Darren; Gressier, Frederic; Taunier, Stephane; Le-Calvar, Marc; Ranchoux, Gilles; Marteau, Herve; Labed, Veronique

    2012-09-01

    Ion exchange resins are widely used across EDF, especially within the nuclear division for the purification of water. Important applications include primary circuit, secondary circuit and effluent treatment, which require high quality nuclear grade resins to retain the dissolved species, some of which may be radioactive. There is a need for more and more efficient purification in order to decrease worker dose during maintenance but also to decrease volumes of radioactive resin waste. Resin performance is subject to several forms of degradation, including physical, chemical, thermal and radioactive, therefore appropriate resin properties have to be selected to reduce such effects. Work has been done with research institutes, manufacturers and on EDF sites to select these properties, create specifications and to continuously improve on these specifications. An interesting example of research regarding resin performance is the resin degradation under irradiation. Resins used in the CVCS circuit of EDF nuclear power plants are subject to irradiation over their lifetime. A study was carried out on the effects of total integrated doses of 0.1, 1 and 10 MGy on typically used EDF mixed bed resins in a 'mini-CVCS' apparatus to simultaneously test actual primary circuit fluid. The tests confirmed that the resins still perform efficiently after a typical CVCS radiation dose. Certain resins also need additional specifications in order to maintain the integrity of the particular circuits they are used in. Recently, EDF has updated its requirements on these high purity nuclear grade resins, produced generic doctrines for all products and materials used on site which include resins of all grades, and as a result have also updated a guide on recommended resin usage for the French fleet of reactors. An overview of the evolutions will be presented. (authors)

  16. Data anonymization patent landscape

    Directory of Open Access Journals (Sweden)

    Mirjana Pejić Bach

    2017-01-01

    Full Text Available The omnipresent, unstoppable increase in digital data has led to a greater understanding of the importance of data privacy. Different approaches are used to implement data privacy. The goal of this paper is to develop a data anonymization patent landscape, by determining the following: (i the trend in data anonymization patenting, (ii the type of technical content protected in data anonymization, (iii the organizations and countries most active in patenting data anonymization know-how; and (iv the topics emerging most often in patent titles. Patents from the PatSeer database relating to data anonymization from 2001 to 2015 were analyzed. We used the longitudinal approach in combination with text mining techniques to develop a data anonymization patent landscape. The results indicated the following. The number of single patent families is growing with a high increase after 2010, thus indicating a positive trend in the area of patenting data anonymization solutions. The majority of patenting activities relate to the G Physics section. Organizations from the USA and Japan assigned the majority of patents related to data anonymization. The results of text mining indicate that the most often used word in titles of data anonymization patents are “anonym*, “method”, “data” and “system”. Several additional words that indicated the most frequent topics related to data anonymization were: “equipment”, “software”, “protection”, “identification”, or “encryption”, and specific topics such as “community”, “medical”, or “service”.

  17. Effects of blood contamination on resin-resin bond strength.

    Science.gov (United States)

    Eiriksson, Sigurdur O; Pereira, Patricia N R; Swift, Edward J; Heymann, Harald O; Sigurdsson, Asgeir

    2004-02-01

    Incremental placement and curing of resin composites has been recommended. However, this requires longer operating time, and therefore, increased risk of contamination. The purpose of this study was to evaluate the effects of blood contamination on microtensile bond strengths (microTBS) between resin interfaces and to determine the best decontamination method to re-establish the original resin-resin bond strength. The top surfaces of 64, 4-mm composite blocks (Z-250, Renew, APX, Pertac II) were untreated as the control, or were treated as follows: blood applied and dried on the surface (Treatment 1), blood applied, rinsed, dried (Treatment 2), blood applied, rinsed, and an adhesive applied (Single Bond, One-Step, Clearfil SE, Prompt L-Pop) (Treatment 3). Fresh composite was applied and light-cured in 2-mm increments. After 24 h storage in water, the specimens were sectioned into 0.7-mm thick slabs, trimmed to a cross-sectional area of 1 mm(2), and loaded to failure at a crosshead speed of 1 mm/min using an Instron universal testing machine. Data were analyzed using two-way ANOVA and Fisher's PLSD test (pcontamination resulted in resin-resin bond strengths of only 1.0-13.1 MPa. Rinsing raised bond strengths to over 40 MPa for each material. Use of an adhesive further increased bond strengths except for Pertac II. Rinsing blood from contaminated surfaces increases the resin-resin bond strength significantly and the application of an appropriate adhesive increases the bond strength to control levels.

  18. 76 FR 82279 - Electronic Delivery of Search Results From the United States Patent and Trademark Office to the...

    Science.gov (United States)

    2011-12-30

    ...] Electronic Delivery of Search Results From the United States Patent and Trademark Office to the European... United States Patent and Trademark Office (USPTO) has recently begun electronic delivery of search... the search results from a previously filed patent application to which the European patent application...

  19. Caries-preventive effect of a one-time application of composite resin and glass ionomer sealants after 5 years.

    NARCIS (Netherlands)

    Beiruti, N.; Frencken, J.E.F.M.; Hof, M.A. van 't; Taifour, D.; Palenstein Helderman, W.H. van

    2006-01-01

    The aim of the present trial was to (1) compare the caries-preventive effect of glass ionomer sealants, placed according to the atraumatic restorative treatment (ART) procedure, with composite resin sealants over time and (2) investigate the caries-preventive effect after complete disappearance of

  20. Novel silica-based ion exchange resin

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    Eichrom`s highly successful Diphonixo resin resembles a conventional ion exchange resin in its use of sulfonic acid ligands on a styrene- divinylbenzene matrix. Diphonix resin exhibits rapid exchange kinetics that allow economical operation of ion exchange systems. Unlike conventional resins, Diphonix resin contains chelating ligands that are diphosphonic acid groups that recognize and remove the targeted metals and reject the more common elements such as sodium, calcium and magnesium. This latter property makes Diphonix ideal for many industrial scale applications, including those involving waste treatment. For treatment of low-level, transuranic (TRU) and high- level radioactive wastes, Diphonix`s polystyrene backbone hinders its application due to radiolytic stability of the carbon-hydrogen bonds and lack of compatibility with expected vitrification schemes. Polystyrene-based Diphonix is approximately 60% carbon- hydrogen. In response to an identified need within the Department of Energy for a resin with the positive attributes of Diphonix that also exhibits greater radiolytic stability and final waste form compatibility, Eichrom has successfully developed a new, silica-based resin version of Diphonix. Target application for this new resin is for use in environmental restoration and waste management situations involving the processing of low-level, transuranic and high-level radioactive wastes. The resin can also be used for processing liquid mixed waste (waste that contains low level radioactivity and hazardous constituents) including mixed wastes contaminated with organic compounds. Silica-based Diphonix is only 10% carbon-hydrogen, with the bulk of the matrix silica.

  1. Immobilization of spent resin with epoxy resin

    International Nuclear Information System (INIS)

    Gultom, O.; Suryanto; Sayogo; Ramdan

    1997-01-01

    immobilization of spent resin using epoxy resin has been conducted. The spent resin was mixtured with epoxy resin in variation of concentration, i.e., 30, 40, 50, 60, 70 weight percent of spent resin. The mixture were pour into the plastic tube, with a diameter of 40 mm and height of 40 mm. The density, compressive strength and leaching rate were respectively measured by quanta chrome, paul weber apparatus and gamma spectrometer. The results showed that the increasing of waste concentration would be decreased the compressive strength, and increased density by immobilized waste. The leaching rate of 137 Cs from waste product was not detected in experiment (author)

  2. Patent documentation - comparison of two MT strategies

    DEFF Research Database (Denmark)

    Offersgaard, Lene; Povlsen, Claus

    2007-01-01

    This paper focuses on two matters: A comparison of how two different MT strategies manage translating the text type of patent documentation and a survey of what is needed to transform a MT research prototype system to a translation application for patent texts. The two MT strategies is represented....... The distinctive text type of patents pose special demands for machine translation and these aspects are discussed based on linguistic observations with focus on the users point of view. Two main demands are automatic pre processing of the documents and implementation of a module which in a flexible and user......-friendly manner offers the opportunity to extend the lexical coverage of the system. These demands and the comparison of the two MT strategies are discussed on the basis of proofread patents....

  3. 75 FR 54116 - Notice of Intent To Grant Partially Exclusive License of the United States Patent Application No...

    Science.gov (United States)

    2010-09-03

    ... coatings, side dressing, lawn application and starter ground cover) and applications in the fields of soil... announcement. ADDRESSES: United States Army Engineer Research and Development Center, Attn: CEERD-OT (Ms. Bea...

  4. [INDENA SPA company's patent portfolio of Ginkgo biloba preparation].

    Science.gov (United States)

    Wang, Nan; Guo, Kai; Cheng, Xin-min; Liu, Wei

    2015-10-01

    INDENA SPA Company in Italy is a multi-national company that produces and sells plant extracts. Based on its own re- search advantages in the field of Ginkgo biloba preparation, the company protects its own products market effectively through building patent portfolio around the patents of its opponent. Based on the multi-angle analysis for patent portfolio of G. biloba preparation from the aspects of application time, legal status, technical development route, and patent portfolio layout, this article provides technical reference on research and development of G. biloba preparation, and the author suggest that Chinese applicants learn techniques and layout experiences of other patents fully to enhance the level of research and patent protection level.

  5. Japan's patent issues relating to life science therapeutic inventions.

    Science.gov (United States)

    Tessensohn, John A

    2014-09-01

    Japan has made 'innovation in science and technology' as one of its central pillars to ensure high growth in its next stage of economic development and its life sciences market which hosts regenerative medicine was proclaimed to be 'the best market in the world right now.' Although life science therapeutic inventions are patentable subject matter under Japanese patent law, there are nuanced obviousness and enablement challenges under Japanese patent law that can be surmounted in view of some encouraging Japanese court developments in fostering a pro-patent applicant environment in the life sciences therapeutic patent field. Nevertheless, great care must be taken when drafting and prosecuting such patent applications in the world's second most important life sciences therapeutic market.

  6. Development of AlGaN-based deep-ultraviolet (DUV) LEDs focusing on the fluorine resin encapsulation and the prospect of the practical applications

    Science.gov (United States)

    Hirano, Akira; Nagasawa, Yosuke; Ippommatsu, Masamichi; Aosaki, Ko; Honda, Yoshio; Amano, Hiroshi; Akasaki, Isamu

    2016-09-01

    AlGaN-based LEDs are expected to be useful for sterilization, deodorization, photochemical applications such as UV curing and UV printing, medical applications such as phototherapy, and sensing. Today, it has become clear that efficient AlGaN-based LED dies are producible between 355 and 250 nm with an external quantum efficiency (EQE) of 3% on flat sapphire. These dies were realized on flat sapphire without using a special technique, i.e., reduction in threading dislocation density or light extraction enhancement techniques such as the use of a photonic crystal or a patterned sapphire substrate. Despite the limited light extraction efficiency of about 8% owing to light absorption at a thick p-GaN contact layer, high EQEs of approximately 6% has been reproducible between 300 and 280 nm without using special techniques. Moreover, an EQE of 3.9% has been shown at 271 nm, despite the smaller current injection efficiency (CIE). The high EQEs are thought to correspond to the high internal quantum efficiency (IQE), indicating a small room for improving IQE. Accordingly, resin encapsulation on a simple submount is strongly desired. Recently, we have succeeded in demonstrating fluorine resin encapsulation on a ceramic sheet (chip-on-board, COB) that is massproducible. Furthermore, the molecular structure of a resin with a durability of more than 10,000 h is explained in this paper from the photochemical viewpoint. Thus, the key technologies of AlGaN-based DUV-LEDs having an EQE of 10% within a reasonable production cost have been established. The achieved efficiency makes AlGaN-based DUVLEDs comparable to high-pressure mercury lamps.

  7. Identification and Analysis of Technology Emergence Using Patent Classification

    Science.gov (United States)

    2014-01-01

    and legal time and capital. The desired payoff for this investment is monopolistic control of a section of the technology space, allowed by present...the claims of their application based on either the prior art cited by the patent examiner or economic reali- ties surrounding the markets for...have been developed, the claims of the patents have been tuned and tested at the respective patent office, and market -driven commercial realities may

  8. How Important are Noncorporate Patents?

    DEFF Research Database (Denmark)

    Schneider, Cédric

    2011-01-01

    This article analyses the innovative performances of noncorporate inventors using patent citations data from the European Patent Office. The results show that inventions patented outside an established corporate framework are on average less ‘important’ than corporate patents, but with large...... variations across technology classes. Patents applied for by independent inventors, start-ups and corporate firms are of comparable ‘quality’ in emerging technologies. The results also highlight that in these fields noncorporate patents are more ‘radical’ than corporate patents....

  9. 37 CFR 1.137 - Revival of abandoned application, terminated or limited reexamination prosecution, or lapsed patent.

    Science.gov (United States)

    2010-07-01

    ... petition may be filed pursuant to this paragraph to revive an abandoned application, a reexamination... unintentional, a petition may be filed pursuant to this paragraph to revive an abandoned application, a... fee. (d) Terminal disclaimer. (1) Any petition to revive pursuant to this section in a design...

  10. Patent Ductus Arteriosus

    Science.gov (United States)

    ... With Patent Ductus Arteriosus Figure A shows the interior of a normal heart and normal blood flow. ... PDA may shrink and go away. However, some children need treatment to close their PDAs. Some children ...

  11. Development of radiation-curable resin based on natural rubber

    Energy Technology Data Exchange (ETDEWEB)

    Mohd, Dahlan; Harun, Abdul Ghani [Nuclear Energy Unit, Bangi, Selangor (Malaysia)

    1994-12-31

    A new radiation curable resin based on natural rubber has been developed. The resin was based on the reaction between low molecular weight epoxidised natural rubber and acrylic acid. When formulated with reactive monomers and photoinitiator, it solidified upon irradiation with UV light. The resin may find applications in coating for cellulosic-based substrates and pressure-sensitive adhesive.

  12. Development of radiation-curable resin based on natural rubber

    International Nuclear Information System (INIS)

    Dahlan Mohd; Abdul Ghani Harun

    1993-01-01

    A new radiation curable resin based on natural rubber has been developed. The resin was based on the reaction between low molecular weight epoxidised natural rubber and acrylic acid. When formulated with reactive monomers and photoinitiator, it solidified upon irradiation with UV light. The resin may find applications in coating for cellulosic-based substrates and pressure-sensitive adhesive

  13. Patent protection strategies

    Directory of Open Access Journals (Sweden)

    Himanshu Gupta

    2010-01-01

    Full Text Available It is widely recognized that the pharmaceutical industry faces serious financial challenges. Large numbers of blockbuster drugs are losing patent protection and going generic. The pipeline of new drugs is too sparse to fill the gap and generate a platform for future growth. Moreover, many of the new products are biologics with much narrower target patient populations and comparatively higher prices relative to traditional pharmaceuticals. So now the time has come for pharmaceutical scientists to have a better understanding of patent fundamentals. This need is illustrated by analyses of key scientific and legal issues that arose during recent patent infringement cases involving Prozac, Prilosec, and Buspar. Facing this scenario, the pharmaceutical industry has moved to accelerate drug development process and to adopt at the same time different strategies to extend the life time of the patent monopoly to provide the economic incentives and utilizing it for drug discovery and development. This review covers the need of patent protection and various strategies to extend the patent.

  14. Patenting Nanomedicine in Europe

    DEFF Research Database (Denmark)

    Nordberg, Ana

    This work addresses the question of determining whether reinterpretation, reformulation or replacement of article 53 (c) of the European Patent Convention is viable and advisable. It does so by reference to novel or resurfacing interpretative concerns connected with emerging technologies exemplif......This work addresses the question of determining whether reinterpretation, reformulation or replacement of article 53 (c) of the European Patent Convention is viable and advisable. It does so by reference to novel or resurfacing interpretative concerns connected with emerging technologies...... exemplified by nanomedicine, while considering known interpretative issues and traditional objections to this provision. The debate concerning the patentability of ‘medical methods’ is multi-layered and complex. The ‘medical methods exception’ is a public policy mechanism, intended to introduce flexibility...... in the patent system in order to allow for the protection of core ethical values of society. Nanotechnology inventions blur the lines between patentable subject matter and what may fall under the exception from patentability. It is a good example of how in recent years, emerging technologies have been...

  15. 75 FR 32418 - Notice of Intent To Grant Partially Exclusive License of the United States Patent Application No...

    Science.gov (United States)

    2010-06-08

    ...-1076. FOR FURTHER INFORMATION CONTACT: Ms. Bea Shahin (217) 373-7234, FAX (217) 373-7210, e-mail: Bea.S... applications to achieve increased soil strength, reduced air transport, and decreased soil erosion. During...

  16. The lifespan of semiconductor patents by assignee and patent characteristics

    Directory of Open Access Journals (Sweden)

    Chang Shu-Hao

    2017-01-01

    Full Text Available Evaluating the values of patents is critical for both managers and investors. Patent maintenance time is an ideal proxy indicator for evaluating commercial patent value. This study investigated the survival rates of patents in the semiconductor industry by using a survival analysis and incorporated a predictive model for patent maintenance times. The technical characteristics of the patents, the assignee factors, and the statuses of the patents were used as the predictive factors for patent maintenance time. The results revealed a small entity size and the number of assignees are the risk factors that increase the likelihood of the maintenance time of a patent decreasing. The litigation status of a patent and the number of its international patent classifications, claims, forward citations, and assignments were determined to be the protection factors that raise the likelihood of its maintenance time extending. Additionally, substantial differences were noted between small entities and nonsmall entities and between being litigated and not in their effects on the survival rates of patents. This study examined the factors that affect the survival rates of patents and provides a reference for the managers and investors of intellectual property rights to use when assessing technical and commercial patent values.

  17. Measuring patent quality and national technological capacity in cross-country comparison

    OpenAIRE

    Boeing, Philipp; Müller, Elisabeth

    2016-01-01

    China recently surpassed the USA as the greatest global source of patent applications. However, without internationally comparable measures of patent quality it remains questionable whether China's patent expansion constitutes the rise of a new technological superpower. Our novel quality index is based on citations from international search reports and provides internationally comparable, quality-adjusted figures for applications made under the Patent Cooperation Treaty (PCT). We show that Ch...

  18. What is the Destiny of Patents of Brazilian Universities?

    Directory of Open Access Journals (Sweden)

    André Luiz de Souza Querido

    2011-03-01

    Full Text Available The power of patent is expressed when the innovative product or process goes to market, and the exclusive right that patent ensures generates the market power, and the holder possibility to obtain competitive advantage over competitors. Thus, it becomes compelling the discussions on the universities need for transformation of patent applications efforts into granted patents, which could be negotiated with a higher degree of juridical certainty and, consequently, higher value added. To establish an Index of Patents Granting, and understand the importance of Technological Innovation Nuclei for the increase of this index, it was developed a survey on the number of patents granted to Brazilian universities and evaluated the structure of Technological Innovation Nuclei of these universities. From the survey on the granting cases, it was verified that the universities presenting, among other characteristics, better structured Technological Innovation Nuclei stood out.

  19. The Battle for Patent Rights in Plant Biotechnology

    DEFF Research Database (Denmark)

    Schneider, Cédric

    2011-01-01

    This paper describes and analyzes the occurrence and extent of oppositions initiated against plant biotechnology patents granted by the European Patent Office (EPO). The opposition mechanism is a legal procedure that allows any third party to challenge the validity of patents awarded by the EPO....... Results indicate that the opposition rate is far greater in plant biotechnology than in other emerging industries. Consistent with theoretical predictions, the empirical findings suggest that opposed patents are disproportionately those that score high on features that proxy for their “value” or “quality......”. In contrast to previous findings, however, the results show that large-volume applicants are more likely to be opposed. Because the boundaries of plant biotech patents are ill-defined, large patent portfolios do not promote cooperative behavior such as licensing or settlements. The analysis rejects...

  20. Test Collections for Patent-to-Patent Retrieval and Patent Map Generation in NTCIR-4 Workshop

    OpenAIRE

    Fujii, Atsushi; Iwayama, Makoto; Kando, Noriko

    2004-01-01

    This paper describes the Patent Retrieval Task in the Fourth NTCIR Workshop, and the test collections produced in this task. We perform the invalidity search task, in which each participant group searches a patent collection for the patents that can invalidate the demand in an existing claim. We also perform the automatic patent map generation task, in which the patents associated with a specific topic are organized in a multi-dimensional matrix.

  1. Strategic management and utilization of patents

    International Nuclear Information System (INIS)

    Kim, Gyeong Go; Yun, Gwon Jun

    1993-11-01

    This book deals with why does management of patents need?, system of management of patents with function and site of management of patents and system and composition, what does management of patents department do?, task like technical development, management regulation, patent information, management of patents in small business with technical development of small business, how does business manage the patents in real, introduction of management of patents in the U.S, Europe, Japan, and Korea, and management of patents as strategic management.

  2. Bond strength of resin-resin interfaces contaminated with saliva and submitted to different surface treatments

    Directory of Open Access Journals (Sweden)

    Adilson Yoshio Furuse

    2007-12-01

    Full Text Available The purpose of this study was to investigate the effect of different surface treatments on shear bond strength of saliva-contaminated resin-resin interfaces. Flat resin surfaces were fabricated. In the control group, no contamination or surface treatment was performed. The resin surfaces of the experimental groups were contaminated with saliva and air-dried, and then submitted to: (G1 rinsing with water and drying; (G2 application of an adhesive system; (G3 rinsing and drying, abrasion with finishing disks, etching and application of adhesive system; (G4 rinsing and drying, etching, application of silane and adhesive system. Resin cylinders were placed over the treated surfaces. The specimens were stored in water or ethanol. Shear bond strength tests were performed and the mode of failure was evaluated. Data were submitted to two-way ANOVA and Dunnett T3 test. Contamination of resin-resin interfaces with saliva significantly reduced shear strength, especially after prolonged storage (p<0.05. Similar values to the original bond strength were obtained after abrasion and application of adhesive (G3 or etching and application of silane and adhesive (G4. If contamination occurs, a surface treatment is required to guarantee an adequate interaction between the resin increments.

  3. Annotated chemical patent corpus: A gold standard for text mining

    NARCIS (Netherlands)

    S.A. Akhondi (Saber); A.G. Klenner (Alexander G.); C. Tyrchan (Christian); A.K. Manchala (Anil K.); K. Boppana (Kiran); D. Lowe (Daniel); M. Zimmermann (Marc); S.A.R.P. Jagarlapudi (Sarma A. R. P.); R. Sayle (Roger); J.A. Kors (Jan); C. Muresan (Cornelia)

    2014-01-01

    textabstractExploring the chemical and biological space covered by patent applications is crucial in early-stage medicinal chemistry activities. Patent analysis can provide understanding of compound prior art, novelty checking, validation of biological assays, and identification of new starting

  4. Patenting human genes: Chinese academic articles' portrayal of gene patents.

    Science.gov (United States)

    Du, Li

    2018-04-24

    The patenting of human genes has been the subject of debate for decades. While China has gradually come to play an important role in the global genomics-based testing and treatment market, little is known about Chinese scholars' perspectives on patent protection for human genes. A content analysis of academic literature was conducted to identify Chinese scholars' concerns regarding gene patents, including benefits and risks of patenting human genes, attitudes that researchers hold towards gene patenting, and any legal and policy recommendations offered for the gene patent regime in China. 57.2% of articles were written by law professors, but scholars from health sciences, liberal arts, and ethics also participated in discussions on gene patent issues. While discussions of benefits and risks were relatively balanced in the articles, 63.5% of the articles favored gene patenting in general and, of the articles (n = 41) that explored gene patents in the Chinese context, 90.2% supported patent protections for human genes in China. The patentability of human genes was discussed in 33 articles, and 75.8% of these articles reached the conclusion that human genes are patentable. Chinese scholars view the patent regime as an important legal tool to protect the interests of inventors and inventions as well as the genetic resources of China. As such, many scholars support a gene patent system in China. These attitudes towards gene patents remain unchanged following the court ruling in the Myriad case in 2013, but arguments have been raised about the scope of gene patents, in particular that the increasing numbers of gene patents may negatively impact public health in China.

  5. Bacillus sp. PS35 Lipase-Immobilization on Styrene-Divinyl Benzene Resin and Application in Fatty Acid Methyl Ester Synthesis.

    Science.gov (United States)

    Palanisamy, Kanmani; Kuppamuthu, Kumaresan; Jeyaseelan, Aravind

    2015-09-01

    Lipase is an enzyme with immense application potential. Ester synthesis by lipase catalysis in organic media is an area of key industrial relevance. Enzymatic preparations with traits that cater to the needs of this function are hence being intensely researched. The objectives of the study were to immobilize the lipase from Bacillus sp. PS35 by cross-linking and adsorption onto styrene-divinyl benzene (Sty-Dvb) hydrophobic resin and to comparatively characterize the free and immobilized lipase preparations. The work also aimed to apply the immobilized lipase for catalysing the fatty acid methyl ester (FAME) synthesis from palm oil and optimize the process parameters for maximizing the yield. In this study, the purified lipase from Bacillus sp. PS35 was immobilized by adsorption onto styrene-divinyl benzene hydrophobic resin with gluteraldehyde cross-linking. The immobilized enzyme showed better pH and temperature stabilities than the free lipase. Organic solvent stability was also enhanced, with the relative activity in the presence of methanol being shifted from 53% to 81%, thereby facilitating the enzyme's application in fatty acid methyl ester synthesis. It exhibited remarkable storage stability over a 30-day period and after 20 repetitive uses. Cross-linking also reduced enzyme leakage by 49%. The immobilized lipase was then applied for biodiesel production from palm oil. Methanol and oil molar ratio of 5:1, three step methanol additions, and an incubation temperature of 50°C were established to be the ideal conditions favoring the transesterification reaction, resulting in 97% methyl ester yield. These promising results offer scope for further investigation and process scale up, permitting the enzyme's commercial application in a practically feasible and economically agreeable manner.

  6. Electrodialytic decontamination of spent ion exchange resins

    International Nuclear Information System (INIS)

    Nott, B.R.

    1982-01-01

    Development of a novel electrodialytic decontamination process for the selective removal of radioactive Cs from spent ion exchange resins containing large amounts of Li is described. The process involves passage of a dc electric current through a bed of the spent ion exchange resin in a specially designed electrodialytic cell. The radiocesium so removed from a volume of the spent resin is concentrated onto a much smaller volume of a Cs selective sorbent to achieve a significant radioactive waste volume reduction. Technical feasibility of the electrodialytic resin decontamination process has been demonstrated on a bench scale with a batch of simulated spent ion exchange resin and using potassium cobalt ferrocyanide as the Cs selective sorbent. A volume reduction factor between 10 and 17 has been estimated. The process appears to be economically attractive. Improvements in process economics can be expected from optimization of the process. Other possible applications of the EDRD process have been identified

  7. Technology Trends Analysis Using Patent Landscaping

    Directory of Open Access Journals (Sweden)

    Sergey Vsevolodovich Kortov

    2017-09-01

    Full Text Available The article is devoted to the analysis and the choice of the priorities in technology development and, particularly, to the use of patent landscaping as a tool for the study of technology trends. Currently, patent activity indicators are often used for technology foresight and for competitive intelligence as well. Nevertheless, causal relationship between these indicators, on the one hand, and strategic and tactical decisions in the sphere of technological development on meso- and microeconomic level, on the other hand, are not adequately investigated to solve practical tasks. The goal of the work is to systemize the challenges of technology trends analysis, which could be effectively solved on the base of patent landscape analysis. The article analyses the patent landscaping methodology and tools, as well as their use for evaluating the current competitive environment and technology foresight. The authors formulated the generalized classification for the criteria of promising technologies for a selected region. To assess the compliance of a technology with these criteria, we propose a system of corresponding indicators of patenting activity. Using the proposed methodology, we have analysed the patent landscape to select promising technologies for the Sverdlovsk region. The research confirmed the hypothesis of the patent landscapes performance in evaluating such technology indicators as stages of the life cycle stage, universality (applicability in different industries, pace of worldwide development, innovations and science availability in the region and potential possibilities for scientific collaboration with international research institutions and universities. The results of the research may be useful to the wide audience, including representatives small and medium enterprises, large companies and regional authorities for the tasks concerned with the technology trends analysis and technology strategy design

  8. Do patents impede the provision of genetic tests in Australia?

    Science.gov (United States)

    Nicol, Dianne; Liddicoat, John

    2013-06-01

    Health policy and law reform agencies lack a sound evidence base of the impacts of patents on innovation and access to healthcare to assist them in their deliberations. This paper reports the results of a survey of managers of Australian genetic testing laboratories that asked a series of questions relating to the tests they perform, whether they pay to access patented inventions and whether they have received notifications from patent holders about patents associated with particular tests. Some diagnostics facilities are exposed to patent costs, but they are all located in the private sector. No public hospitals reported paying licence fees or royalties beyond those included in the price of commercial test kits. Some respondents reported having received enforcement notices from patent holders, but almost all related to the widely known breast cancer-associated patents. Respondents were also asked for their views on the most effective mechanisms to protect their ability to provide genetic tests now and in the future. Going to the media, paying licence fees, ignoring patent rights and relying on the government to take action were widely seen as most effective. Litigation and applications for compulsory licences were seen as some of the least effective mechanisms. These results provide an evidence base for development of health policy and law reform. What is known about the topic? The impact of patents on the delivery of genetic testing services remains unclear in Australia. What does this paper add? The survey reported in this paper suggests that, aside from well-known enforcement actions relating to the breast cancer associated patents, there is little evidence that providers of genetic testing services are being exposed to aggressive patent-enforcement practices. What are the implications for practitioners? Although patent-enforcement actions may increase in the future, a range of strategies are available to providers of testing services to protect them against

  9. Manufacturing of REBCO coils strongly bonded to cooling members with epoxy resin aimed at its application to Maglev

    International Nuclear Information System (INIS)

    Mizuno, Katsutoshi; Ogata, Masafumi; Hasegawa, Hitoshi

    2014-01-01

    Highlights: • Paraffin has a risk of losing thermal coupling during cooling down. • We propose an epoxy impregnated REBCO coil co-wound with PTFE tape. • The coil is tightly bonded to cooling members by epoxy resin without the degradation. • We made a REBCO racetrack coil with the same outer dimension as the Maglev magnet. - Abstract: The REBCO coated conductor has been attracted attention because of its high current density in the presence of high magnetic field. If the coated conductor is applied to Maglev, the operational temperature of the on-board magnets will be over 40 K and energy consumption of cryocoolers will be reduced. That high operational temperature also means the absence of liquid helium. Therefore, reliable thermal coupling is desirable for cooling the coils. We propose an epoxy impregnated REBCO coil co-wound with PTFE tape. While the PTFE tape prevents the performance degradation of the coil, the epoxy resin bonds the coil to cooling members. We carried out three experiments to confirm that the coil structure which we propose has robust thermal coupling without the degradation. First, thermal resistances of paraffin and epoxy were measured varying the temperature from room temperature to 10 K. The measurement result indicates that paraffin has a risk of losing thermal coupling during cooling down. In another experiment, PTFE (polytetrafluoroethylene) tape insulator prevented performance degradation of a small epoxy impregnated REBCO coil, while another REBCO coil with polyimide tape showed clear performance degradation. Finally, we produced a racetrack REBCO coil with the same outer dimension as a Maglev on-board magnet coil. Although the racetrack coil was installed in a GFRP coil case and tightly bonded to the case by epoxy impregnation, any performance degradation was not observed

  10. Manufacturing of REBCO coils strongly bonded to cooling members with epoxy resin aimed at its application to Maglev

    Energy Technology Data Exchange (ETDEWEB)

    Mizuno, Katsutoshi, E-mail: mizuno.katsutoshi.14@rtri.or.jp; Ogata, Masafumi; Hasegawa, Hitoshi

    2014-11-15

    Highlights: • Paraffin has a risk of losing thermal coupling during cooling down. • We propose an epoxy impregnated REBCO coil co-wound with PTFE tape. • The coil is tightly bonded to cooling members by epoxy resin without the degradation. • We made a REBCO racetrack coil with the same outer dimension as the Maglev magnet. - Abstract: The REBCO coated conductor has been attracted attention because of its high current density in the presence of high magnetic field. If the coated conductor is applied to Maglev, the operational temperature of the on-board magnets will be over 40 K and energy consumption of cryocoolers will be reduced. That high operational temperature also means the absence of liquid helium. Therefore, reliable thermal coupling is desirable for cooling the coils. We propose an epoxy impregnated REBCO coil co-wound with PTFE tape. While the PTFE tape prevents the performance degradation of the coil, the epoxy resin bonds the coil to cooling members. We carried out three experiments to confirm that the coil structure which we propose has robust thermal coupling without the degradation. First, thermal resistances of paraffin and epoxy were measured varying the temperature from room temperature to 10 K. The measurement result indicates that paraffin has a risk of losing thermal coupling during cooling down. In another experiment, PTFE (polytetrafluoroethylene) tape insulator prevented performance degradation of a small epoxy impregnated REBCO coil, while another REBCO coil with polyimide tape showed clear performance degradation. Finally, we produced a racetrack REBCO coil with the same outer dimension as a Maglev on-board magnet coil. Although the racetrack coil was installed in a GFRP coil case and tightly bonded to the case by epoxy impregnation, any performance degradation was not observed.

  11. Emission and Mechanical Evaluations of Vinyl-Ester Resin Systems

    National Research Council Canada - National Science Library

    Sands, James

    2003-01-01

    Vinyl-ester resins (VE) are frequently used in liquid molding of composite materials for several applications including naval and army structures, commercial boat manufacturing, and building construction...

  12. Obstacles to prior art searching by the trilateral patent offices: empirical evidence from International Search Reports.

    Science.gov (United States)

    Wada, Tetsuo

    Despite many empirical studies having been carried out on examiner patent citations, few have scrutinized the obstacles to prior art searching when adding patent citations during patent prosecution at patent offices. This analysis takes advantage of the longitudinal gap between an International Search Report (ISR) as required by the Patent Cooperation Treaty (PCT) and subsequent national examination procedures. We investigate whether several kinds of distance actually affect the probability that prior art is detected at the time of an ISR; this occurs much earlier than in national phase examinations. Based on triadic PCT applications between 2002 and 2005 for the trilateral patent offices (the European Patent Office, the US Patent and Trademark Office, and the Japan Patent Office) and their family-level citations made by the trilateral offices, we find evidence that geographical distance negatively affects the probability of capture of prior patents in an ISR. In addition, the technological complexity of an application negatively affects the probability of capture, whereas the volume of forward citations of prior art affects it positively. These results demonstrate the presence of obstacles to searching at patent offices, and suggest ways to design work sharing by patent offices, such that the duplication of search costs arises only when patent office search horizons overlap.

  13. Patent Races and Market Value

    DEFF Research Database (Denmark)

    Czarnitzki, Dirk; Hussinger, Katrin; Leten, Bart

    Patent races are models of strategic interactions between firms competing to develop an invention. The winning firm secures a patent, protecting the invention from imitation. This paper tests the assumption made about the reward structure in patent races, both in discrete and complex industries. We...... identify patent race winners using detailed information from the patent examination reports at the European Patent Office (EPO). Estimates of a market value equation featuring large, R&D-intensive U.S., European and Japanese firms, show that if firms win patent races, their market value increases...... significantly. We further show that the gain in market value is significantly larger for patent race winners in discrete industries than for firms in complex industries....

  14. Analysis of the BEV Technology Progress of America, Europe, Japan and Korea Based on Patent Map

    Science.gov (United States)

    Yurong, Huang; Yuanyuan, Hou; Jingyan, Zhou; Ru, Liu

    2018-02-01

    The paper analyzed the Battery Electric Vehicle patent application trend, major country distribution, main technology layout and patentee of America, Europe, Japan and Korea based on patent information from 2006 to 2016 by using patent map method, and visualized the Battery Electric Vehicle technology progress conditions of the four countries and regions in the last decade.

  15. Evaluation of ferrocyanide anion exchange resins regarding the uptake of Cs+ ions and their regeneration

    International Nuclear Information System (INIS)

    Won, Hui Jun; Mooon, Jei Kwon; Jung, Chong Hun; Chung, Won Yang

    2008-01-01

    Ferrocyanide-anion exchange resin was prepared and the prepared ion exchange resins were tested on the ability to uptake Cs + ion. The prepared ion exchange resins were resin-KCoFC, resin-KNiFC, and resin-KCuFC. The three tested ion exchange resins showed ion exchange selectivity on the Cs + ion of the surrogate soil decontamination solution, and resin- KCoFC showed the best Cs + ion uptake capability among the tested ion exchange resins. The ion exchange behaviors were explained well by the modified Dubinin-Polanyi equation. A regeneration feasibility study of the spent ion exchange resins was also performed by the successive application of hydrogen peroxide and hydrazine. The desorption of the Cs + ion from the ion exchange resin satisfied the electroneutrality condition in the oxidation step; the desorption of the Fe 2+ ion in the reduction step could also be reduced by adding the K + ion

  16. Savannah River Site Patented Technologies Summaries

    Energy Technology Data Exchange (ETDEWEB)

    Rabold, D.E.

    1995-07-18

    This information represents SRS`s contribution of the DOE technology information network, an internet service coordinated out of Los Alamos. The information provided is strictly DOE-SR-titled and-issued patented technologies including environmental remediation, robotics, sensors, materials science, biomedical applications, hydrogen, and consumer products.

  17. Effect of the economic crisis on the production of immunology patents managed through the Patent Cooperation Treaty agreement from 2004-2011.

    Science.gov (United States)

    Campos, Elena; Campos, Adolfo

    2015-07-01

    To determine the evolution of patents in immunology, as a result of research and innovation in the years 2004-2011. The search for patents published internationally in immunology was made by using the SCOPUSTM database. SCOPUS gives information about over 23 million patents. The extracted data from patents were: inventors and applicants; their nationalities; sections, classes and subclasses of the International Patent Classification. 89 countries. Data have been obtained from the database SCOPUS. It has been used for the international patent classification. Patents by country, Productive sectors, Productive areas. A total of 17,281 patents were applied for immunology during 2004-2011 of which 16,811 were from 30 Organisation for Economic Cooperation and Development countries, and 5326 from 28 countries in the European Union. These patents were granted in 89 countries and 13,699 of them were submitted by researchers from only one country. Private entities applied for 62.45% of all patents, universities 17.48%, hospitals 3.40% and public research organisations and private applicants applied for the rest. The university that made more applications was the University of California with 315 and the company was Genentech Inc. (US) with 302. The reduction in the number of applications of international patents in all disciplines of science also affected the area of immunology. Collaboration in immunology between universities, companies and hospitals is hard because their interests are different. It is shown in patent applications that the majority of patents in immunology are applied for by only one entity. Patents in immunology are developed, mainly, in aspects such as medical preparations, peptides, mutation or genetic engineering, therapeutic activity of chemical compounds and analysing materials by determining their chemical or physical properties.

  18. The fallacy of Software Patents

    CERN Multimedia

    CERN. Geneva

    2015-01-01

    Software patents are usually used as argument for innovation but do they really promote innovation? Who really benefits from software patents? This talk attempts to show the problems with software patents and how they can actually harm innovation having little value for software users and our society in general.

  19. Patent Searching for Librarians and Inventors.

    Science.gov (United States)

    Wherry, Timothy Lee

    Information on patents is provided for librarians and laypersons requiring an understanding of the system and the processes involved. Chapter 1 discusses successful patents; terms and concepts; patent types; copyright; trademark; requirements; patent examiners; patent pending; expiration; patentee and assignee; and reissued patents. Chapter 2…

  20. Patent pools: Intellectual property rights and competition.

    NARCIS (Netherlands)

    Rodriguez, V.F.

    2010-01-01

    Patent pools do not correct all problems associated with patent thickets. In this respect, patent pools might not stop the outsider problem from striking pools. Moreover, patent pools can be expensive to negotiate, can exclude patent holders with smaller numbers of patents or enable a group of major

  1. Patent urachus repair - slideshow

    Science.gov (United States)

    ... Drugs & Supplements Videos & Tools About MedlinePlus Show Search Search MedlinePlus GO GO About MedlinePlus Site Map FAQs Customer Support Health Topics Drugs & Supplements Videos & Tools Español You Are Here: Home → Medical Encyclopedia → Patent urachus repair - series—Normal anatomy URL of this ...

  2. Patent ductus arteriosus

    Science.gov (United States)

    ... Drugs & Supplements Videos & Tools About MedlinePlus Show Search Search MedlinePlus GO GO About MedlinePlus Site Map FAQs Customer Support Health Topics Drugs & Supplements Videos & Tools Español You Are Here: Home → Medical Encyclopedia → Patent ductus arteriosus URL of this page: //medlineplus.gov/ ...

  3. Patent urachus repair

    Science.gov (United States)

    ... Drugs & Supplements Videos & Tools About MedlinePlus Show Search Search MedlinePlus GO GO About MedlinePlus Site Map FAQs Customer Support Health Topics Drugs & Supplements Videos & Tools Español You Are Here: Home → Medical Encyclopedia → Patent urachus repair URL of this page: //medlineplus.gov/ ...

  4. Expedited patent examination for green inventions: Developing countries' policy choices

    International Nuclear Information System (INIS)

    Lu, Bingbin

    2013-01-01

    Innovation in green technology is important. Patent rights can provide incentives for green technology research and development. Expedited patent examination for green inventions has emerged as a policy instrument to provide such incentives. Developing countries were never opposed to patents for green technologies. China and Brazil have led the way by offering expedited examinations for green patent applications. More developing countries are expected to follow. Expedited examination for green technologies is consistent with the intellectual property system objectives and is justified by the clear social benefit from green technologies. Introducing such expedited programs in developing countries has sufficient advantages. Existing models of expedited programs for green technologies are analyzed to generalize key issues and to discern suitable policy choices for developing countries. When introducing such programs, a balanced definition for green technology is preferred; a special classification requirement is premature and is not recommended; a pre-examination search requirement is generally recommended to balance patent office workloads, and a green patent database is recommended. - Highlights: • There is no north–south divide in promoting green technologies. • Earlier issuance of green patents has its great social benefit. • Green patent application should receive expedited examination. • Developing countries should introduce such expedited programs. • A suitable approach for developing countries is searched and recommended

  5. METRICS DEVELOPMENT FOR PATENTS.

    Science.gov (United States)

    Veiga, Daniela Francescato; Ferreira, Lydia Masako

    2015-01-01

    To develop a proposal for metrics for patents to be applied in assessing the postgraduate programs of Medicine III - Capes. From the reading and analysis of the 2013 area documents of all the 48 areas of Capes, a proposal for metrics for patents was developed to be applied in Medicine III programs. Except for the areas Biotechnology, Food Science, Biological Sciences III, Physical Education, Engineering I, III and IV and Interdisciplinary, most areas do not adopt a scoring system for patents. The proposal developed was based on the criteria of Biotechnology, with adaptations. In general, it will be valued, in ascending order, the deposit, the granting and licensing/production. It will also be assigned higher scores to patents registered abroad and whenever there is a participation of students. This proposal can be applied to the item Intellectual Production of the evaluation form, in subsection Technical Production/Patents. The percentage of 10% for academic programs and 40% for Masters Professionals should be maintained. The program will be scored as Very Good when it reaches 400 points or over; Good, between 200 and 399 points; Regular, between 71 and 199 points; Weak up to 70 points; Insufficient, no punctuation. Desenvolver uma proposta de métricas para patentes a serem aplicadas na avaliação dos Programas de Pós-Graduação da Área Medicina III - Capes. A partir da leitura e análise dos documentos de área de 2013 de todas as 48 Áreas da Capes, desenvolveu-se uma proposta de métricas para patentes, a ser aplicada na avaliação dos programas da área. Constatou-se que, com exceção das áreas Biotecnologia, Ciência de Alimentos, Ciências Biológicas III, Educação Física, Engenharias I, III e IV e Interdisciplinar, a maioria não adota sistema de pontuação para patentes. A proposta desenvolvida baseou-se nos critérios da Biotecnologia, com adaptações. De uma forma geral, foi valorizado, em ordem crescente, o depósito, a concessão e o

  6. Decoding gene patents in Australia.

    Science.gov (United States)

    Denley, Adam; Cherry, James

    2014-10-03

    Patents directed to naturally occurring genetic material, such as DNA, RNA, chromosomes, and genes, in an isolated or purified form have been granted in Australia for many years. This review provides scientists with a summary of the gene patent debate from an Australian perspective and specifically reviews how the various levels of the legal system as they apply to patents-the Australian Patent Office, Australian courts, and Australian government-have dealt with the issue of whether genetic material is proper subject matter for a patent. Copyright © 2015 Cold Spring Harbor Laboratory Press; all rights reserved.

  7. Are the Brookhill-Wilk patents impediments to market growth in cybersurgery?

    Science.gov (United States)

    McLean, T R; Torrance, A W

    2008-03-01

    In the past, many surgeons could practise their craft with little or no knowledge of patent law. But in the world of robotic and computerized surgery, this is increasingly a myopic approach, because the principle means of protecting high-tech surgical instruments is through the application of patent law. The issue is: does the Brookhill-Wilk patent, which covers the performance of remote robotic surgery, impede the growth of cybersurgery? Review of the Brookhill-Wilk patent and relevant law. Patent law, which first took its form in the Middle Ages, attempts to balance the rewarding of innovation with the stifling of market growth. Using US patent law as a model, it would appear that the Brookhill-Wilk patent, a particular example of a medical process patent, could inhibit the growth of cybersurgery, as potential sums of money could be demanded by the patent holder from anyone who practises cybersurgery. However, two recent US Supreme Court cases appear to have seriously undermined the validity of a number of medical process patents, including the Brookhill-Wilk patent. Based on recent changes in patent law, it is not expected that Brookhill-Wilk patent will hinder the growth of cybersurgery.

  8. In-situ fabrication of halloysite nanotubes/silica nano hybrid and its application in unsaturated polyester resin

    Science.gov (United States)

    Lin, Jing; Zhong, Bangchao; Jia, Zhixin; Hu, Dechao; Ding, Yong; Luo, Yuanfang; Jia, Demin

    2017-06-01

    Silica nanoparticles was in-situ grown on the surface of halloysite nanotubes (HNTs) by a facile one-step approach to prepare a unique nano-structured hybrid (HNTs-g-Silica). The structure, morphology and composition of HNTs-g-Silica were investigated. It was confirmed that silica nanoparticles with the diameter of 10-20 nm were chemically grafted through Sisbnd O bonds and uniformly dispersed onto the surface of HNTs, leading to the formation of nano-protrusions on the nanotube surface. Due to the significantly improved interface strength between HNTs-g-Silica and polymer matrix, HNTs-g-Silica effectively toughened unsaturated polyester resin (UPE) and endowed UPE with superior thermal stability compared to HNTs. Based on the unique hybrid architecture and the improved properties of UPE nanocomposites, it is envisioned that HNTs-g-Silica may be a promising filler for more high performance and functional polymers composites and the fabrication method may have implications in the synthesis of nano hybrid materials.

  9. Preparation of wheat straw based superabsorbent resins and their applications as adsorbents for ammonium and phosphate removal.

    Science.gov (United States)

    Liu, Jia; Su, Yuan; Li, Qian; Yue, Qinyan; Gao, Baoyu

    2013-09-01

    A novel wheat straw cellulose-g-poly (potassium acrylate)/polyvinyl alcohol (WSC-g-PKA/PVA) semi-interpenetrating polymer networks (semi-IPNs) superabsorbent resin (SAR) was prepared by graft copolymerization. The structure and performance of the WSC-g-PKA/PVA semi-IPNs SAR was studied and compared with those of wheat straw cellulose-g-poly (potassium acrylate) (WSC-g-PKA) SAR. The effects of various experimental parameters such as solution pH, concentration, contact time and ion strength on NH4(+) and PO4(3-) removal from solutions were investigated. Equilibrium isotherm data of adsorption of both NH4(+) and PO4(3-) were well fitted to the Freundlich model. Kinetic analysis showed that the pseudo-second-order kinetic model was more suitable for describing the whole adsorption process of NH4(+) and PO4(3-) on SARs. Overall, WSC-g-PKA/PVA semi-IPNs SAR showed better properties in comparison with WSC-g-PKA SAR and it could be considered as one efficient material for the removal and recovery of nitrogen and phosphorus with the agronomic reuse as a fertilizer. Copyright © 2013 Elsevier Ltd. All rights reserved.

  10. Manufacturing of REBCO coils strongly bonded to cooling members with epoxy resin aimed at its application to Maglev

    Science.gov (United States)

    Mizuno, Katsutoshi; Ogata, Masafumi; Hasegawa, Hitoshi

    2014-11-01

    The REBCO coated conductor has been attracted attention because of its high current density in the presence of high magnetic field. If the coated conductor is applied to Maglev, the operational temperature of the on-board magnets will be over 40 K and energy consumption of cryocoolers will be reduced. That high operational temperature also means the absence of liquid helium. Therefore, reliable thermal coupling is desirable for cooling the coils. We propose an epoxy impregnated REBCO coil co-wound with PTFE tape. While the PTFE tape prevents the performance degradation of the coil, the epoxy resin bonds the coil to cooling members. We carried out three experiments to confirm that the coil structure which we propose has robust thermal coupling without the degradation. First, thermal resistances of paraffin and epoxy were measured varying the temperature from room temperature to 10 K. The measurement result indicates that paraffin has a risk of losing thermal coupling during cooling down. In another experiment, PTFE (polytetrafluoroethylene) tape insulator prevented performance degradation of a small epoxy impregnated REBCO coil, while another REBCO coil with polyimide tape showed clear performance degradation. Finally, we produced a racetrack REBCO coil with the same outer dimension as a Maglev on-board magnet coil. Although the racetrack coil was installed in a GFRP coil case and tightly bonded to the case by epoxy impregnation, any performance degradation was not observed.

  11. [Application of single-retainer all-ceramic resin-bonded fixed partial denture in replacing single anterior tooth].

    Science.gov (United States)

    Lili, Yang; Debiao, Du; Ruoyu, Ning; Deying, Chen; Junling, Wu

    2017-08-01

    Objective In this study, we aimed to evaluate the clinical effect of single-retainer all-ceramic resin-bonded fixed partial denture (RBFPD) on the single anterior tooth loss patients. Methods A total of 20 single-retainer all-ceramic RBFPD
were fabricated and evaluated in a two-year follow-up observation. The restorations were examined on the basis of the American Public Health Association (APHA) criteria. Results A total of 20 single-retainer all-ceramic RBFPD achieved class A evaluation after a six-month follow-up observation. One single-retainer all-ceramic RBFPD was classified as class B for secondary caries after a one-year follow-up observation. After a two-year follow-up observation, one single-retainer all-ceramic RBFPD was classified as class B because of secondary caries, and one single-retainer all-ceramic RBFPD was classified as class B because of fracture. Conclusion Single-retainer all-ceramic RBFPD is a promising and optional method in replacing single anterior tooth.

  12. Optimal patent policies: A survey

    DEFF Research Database (Denmark)

    Poulsen, Odile

    2002-01-01

    This paper surveys some of the patent literature, in particular, it focuses on optimal patent policies. We compare two situations. The first where the government only has a single policy tool to design the optimal patent policy, namely the optimal patent length. In the second situation......, the government uses two policy tools, the optimal breadth and length. We show that theoretical models give very different answers to what is the optimal patent policy. In particular, we show that the optimal patent policy depends among othet things on the price elasticity of demand, the intersectoral elasticity...... of research outputs as well as the degree of compettition in the R&D sector. The actual law on intellectual property, which advocates a unique patent length of 20 years is in general not supported by theoretical models....

  13. Patenting Human Genes in Europe

    DEFF Research Database (Denmark)

    Minssen, Timo

    2017-01-01

    In accordance with the concept of the book and the assigned scope of the contribution, this chapter describes the European law with respect to the patent-eligibility of isolated DNA sequences. This chapter will further include a brief comparison with recent developments from the US and Australia....... It will, however, not focus on the important debates regarding the patent-eligibility of other biological material, diagnostic methods patents (as data aggregators) or abstract ideas which will be addressed by other contributions. Moreover, the analysis will merely concentrate on patent-eligibility. Other...... patentability requirement will only be briefly touched upon in the discussion part. The paper starts out in section 1.5.2 by discussing the patent-eligibility of isolated human DNA sequences on the European national level and under the Biotechnology Directive. Then the patent-eligibility of isolated human DNA...

  14. Lovely but dangerous: The impact of patent citations on patent duration

    OpenAIRE

    Maurseth, Per Botolf

    2001-01-01

    - What is the impact of patent citations on patent renewal behaviour? Patent citations are commonly used as an indicator of technology spillovers. For cited patents therefore, patent citations have a potentially ambiguous impact. On the one hand, patent citations may indicate a scientific breakthrough, a high value of the cited patent and therefore a long survival period. On the other hand, patent citations may indicate competing innovations that render the cited patent obsolete. By discri...

  15. Analysis of Taiwan patents for the medicinal mushroom "Niu-Chang- Chih".

    Science.gov (United States)

    Chen, Yu-Fen; Lu, Wen-Ling; Wu, Ming-Der; Yuan, Gwo-Fang

    2013-04-01

    "Niu-Chang-Chih" (Antrodia cinnanomea) is a medicinal mushroom that has only been collected from the aromatic tree, Cinnamomum kanehirai, which is native to Taiwan. A total of 105 Taiwan patent applications and patents for "Niu-Chang-Chih" were collected and analyzed. Patent applications and granted patents claiming newly identified functional components from "Niu-Chang-Chih," biologically pure cultures of the mushroom strain, and cultivation of "Niu-Chang-Chih" were examined. Several applications and patents claim identified active compounds from "Niu-Chang- Chih," which provide better patent protection. These newly identified functional compounds include cyclohexanones, maleic and succinic acid derivatives, labdane diterpenoids, and benzenoids. Newly identified functional proteins include a glutathione-dependent formaldehyde dehydrogenase (GFD), a glycoprotein named ACA1, and a laccase. Newly identified functional polysaccharides include ACP1, ACP2, and ACP3. The number of patents for newly identified compounds and their uses are expected to continue growing.

  16. Polyvinyl chloride resin

    International Nuclear Information System (INIS)

    Kim, Hong Jae

    1976-06-01

    This book contains polyvinyl chloride resin industry with present condition such as plastic industry and polyvinyl chloride in the world and Japan, manufacture of polyvinyl chloride resin ; suspension polymerization and solution polymerization, extruding, injection process, hollow molding vinyl record, vacuum forming, polymer powders process, vinyl chloride varnish, vinyl chloride latex, safety and construction on vinyl chloride. Each chapter has descriptions on of process and kinds of polyvinyl chloride resin.

  17. Patent Blocking and Infringement and their Effects on Firms?

    DEFF Research Database (Denmark)

    Grimpe, Christoph; Hussinger, Katrin

    In recent years, firms have increasingly contributed to and been confronted with a patent landscape characterized by numerous but marginal inventions, overlapping claims and patent fences. As a result, firms risk to be blocked in their patent applications or to be infringed upon by rivals. While...... both aspects constitute major challenges for the appropriation of returns to inventive activity, extant literature suggests that participation in the market for technology might actually resolve or at least alleviate these problems. In this paper, we investigate the effect of patent blocking...... and infringement on firms’ engagement in in- and cross-licensing. Based on a sample of more than 1000 German manufacturing firms our results show that firms engage in in-licensing as a reaction to patent blocking and in both in- and cross-licensing if their protected IP was infringed upon. However, these effects...

  18. Photopolymerizable silicone monomers, oligomers, and resins

    International Nuclear Information System (INIS)

    Jacobine, A.F.; Nakos, S.T.

    1992-01-01

    The purpose of this chapter is to acquaint the general photopolymer researcher with the historical development of the chemistry and technology of photopolymerizable silicone monomers, fluids, and resins. The current status of research in these areas is assessed. The focus of this chapter is not only on the polymer chemistry and application of this technology, but also on important aspects of the synthetic chemistry involved in the preparation of UV-curable silicone monomers, oligomers, and resins. 236 refs., 6 tabs

  19. Cycloaliphatic epoxide resins for cationic UV - cure

    International Nuclear Information System (INIS)

    Verschueren, K.; Balwant Kaur

    1999-01-01

    This paper introduces the cyclo - aliphatic epoxide resins used for the various applications of radiation curing and their comparison with acrylate chemistry. Radiation curable coatings and inks are pre - dominantly based on acrylate chemistry but over the last few years, cationic chemistry has emerged successfully with the unique properties inherent with cyclo - aliphatic epoxide ring structures. Wide variety of cationic resins and diluents, the formulation techniques to achieve the desired properties greatly contributes to the advancement of UV - curing technology

  20. An investigation of the applicability of the new ion exchange resin, Reillex{trademark}-HPQ, in ATW separations. Milestone 4, Final report

    Energy Technology Data Exchange (ETDEWEB)

    Ashley, K.R.; Ball, J.; Grissom, M.; Williamson, M.; Cobb, S.; Young, D.; Wu, Yen-Yuan J.

    1993-09-07

    The investigations with the anion exchange resin Reillex{trademark}-HPQ is continuing along several different paths. The topics of current investigations that are reported here are: The sorption behavior of chromium(VI) on Reillex{trademark}-HPQ from nitric acid solutions and from sodium hydroxide/sodium nitrate solutions; sorption behavior of F{sup {minus}} on Reillex{trademark}-HPQ resin in acidic sodium nitrate solution; sorption behavior of Cl{sup {minus}} on Reillex{trademark}-HPQ resin in acidic sodium nitrate solution; sorption behavior of Br{sup {minus}} on Reillex{trademark}-HPQ resin in acidic sodium nitrate solution; and the Honors thesis by one of the students is attached as Appendix II (on ion exchange properties of a new macroperous resin using bromide as the model ion in aqueous nitrate solutions).

  1. Design of Epoxy based Resin Composites for Automotive Applications: A Case Study on IC Engine Valve Guide

    Science.gov (United States)

    Sidhu, J. S.; Lathkar, G. S.; Sharma, S. B.

    2018-01-01

    The present attempt in this project is to reduce the vibrations, temperature due to friction, noise and weight of I C engine valve guide by replacing conventional metal valve guide with composite valve guide. Composite materials have been used in automotive components because of their properties such as low weight, high specific stiffness, corrosion resistance, ability to produce complex shapes, high specific strength and good impact energy absorption etc. The Internal combustion engine valve guides are the parts that support the valves in the cylinder head, besides this it keeps lubricating oil from getting sucked into the combustion chamber past the intake valve stem, it keeps exhaust gases from getting into the crankcase past the exhaust valve stem and it also keeps the valve face in perfect alignment with the valve seat. A valve guide test rig is indigenously fabricated. Valve guides are manufactured using the developed composite material (Resin ARL-136, Hardener AH-126 and 4 vol% WS2), on a CNC lathe. The performance of the developed composite guide under varied conditions of speeds, that is, fixed change in rpm and modulated changes in rpm is assessed. Noise, temperature and vibrations are measured. The experimental data revealed that contribution of composite guide in respect of acceleration, velocity and displacement components of vibration is not substantial. A substantial reduction in noise levels is seen. As far as temperature rise due to friction is concerned maximum components fail at elevated temperatures, with composite guides the temperature generated due to friction at higher speeds is less, a considerable weight reduction is also observed.

  2. Study on Exothermic Oxidation of Acrylonitrile-butadiene-styrene (ABS Resin Powder with Application to ABS Processing Safety

    Directory of Open Access Journals (Sweden)

    Jenq-Renn Chen

    2010-08-01

    Full Text Available Oxidative degradation of commercial grade ABS (Acrylonitrile-butadiene-styrene resin powders was studied by thermal analysis. The instabilities of ABS containing different polybutadiene (PB contents with respect to temperature were studied by Differential Scanning Calorimeter (DSC. Thermograms of isothermal test and dynamic scanning were performed. Three exothermic peaks were observed and related to auto-oxidation, degradation and oxidative decomposition, respectively. Onset temperature of the auto-oxidation was determined to be around 193 °C. However, threshold temperature of oxidation was found to be as low as 140 °C by DSC isothermal testing. Another scan of the powder after degeneration in air showed an onset temperature of 127 °C. Reactive hazards of ABS powders were verified to be the exothermic oxidation of unsaturated PB domains, not the SAN (poly(styrene-acrylonitrile matrix. Heat of oxidation was first determined to be 2,800 ± 40 J per gram of ABS or 4,720 ± 20 J per gram of PB. Thermal hazards of processing ABS powder are assessed by adiabatic temperature rise at process conditions. IR spectroscopy associated with heat of oxidation verified the oxidative mechanism, and these evidences excluded the heat source from the degradation of SAN. A specially prepared powder of ABS without adding anti-oxidant was analyzed by DSC for comparing the exothermic behaviors. Exothermic onset temperatures were determined to be 120 °C and 80 °C by dynamic scanning and isothermal test, respectively. The assessment successfully explained fires and explosions in an ABS powder dryer and an ABS extruder.

  3. How Patent Function Integration with R&D Influence the Value of Patents

    DEFF Research Database (Denmark)

    Beukel, Karin; Valentin, Finn

    Patent strategies are endogenous to firm appropriability. However, to what extent does firm’s R&D teams’ engagement with patent experts influence the value of patents? We estimate the relationship between firm’s R&D use of patent functions on patent value in Biotech firms. Controlling...... for characteristics of scientific team, firm effects, and other patent value indicators, we find that having a firm specific (in-house) internal patent function is a driver of patent value. In addition, we find that the way in which patent functions create patent value differs dependent on whether the firm has...... internal patent function or not. In-house patent functions create value through narrow patents, whereas, firms with no in-house patent function create valuable patents by the use of broader scoped patents. Our results point to a strong effect of firm specific patent functions, but also explain how firms...

  4. Science of invention patent

    International Nuclear Information System (INIS)

    Park, Yeong Taek; Park, Su Dong

    1999-02-01

    This book tells science of invention patent about new way of invention and creative solution for problems, basic conception of TRIZ, resolution of physical contradictory and technical contradictory, development of system and types of evolution, change of thinking for solving the problems, analysis of structure for problem solution, problem solution using scientific phenomenon and effect, use of standard solution and algorithm of creative problem solution.

  5. Do Military Personnel Patent

    Science.gov (United States)

    2016-12-01

    following questions: In what fields are military personnel most likely to patent, and how do demographics, such as age, race, and gender , along with...technologies, which have transformed how the United States wages war. DARPA continues to develop new technologies and capabilities for the U.S. military today...build the European navies so it instead decided to utilize an innovative ship design to exploit a gap specific to the British Royal Navy. The six

  6. Safety evaluation of cation-exchange resins

    International Nuclear Information System (INIS)

    Kalkwarf, D.R.

    1977-08-01

    Results are presented of a study to evaluate whether sufficient information is available to establish conservative limits for the safe use of cation-exchange resins in separating radionuclides and, if not, to recommend what new data should be acquired. The study was also an attempt to identify in-line analytical techniques for the evaluation of resin degradation during radionuclide processing. The report is based upon a review of the published literature and upon discussions with many people engaged in the use of these resins. It was concluded that the chief hazard in the use of cation-exchange resins for separating radionuclides is a thermal explosion if nitric acid or other strong oxidants are present in the process solution. Thermal explosions can be avoided by limiting process parameters so that the rates of heat and gas generation in the system do not exceed the rates for their transfer to the surroundings. Such parameters include temperature, oxidant concentration, the amounts of possible catalysts, the radiation dose absorbed by the resin and the diameter of the resin column. Current information is not sufficient to define safe upper limits for these parameters. They can be evaluated, however, from equations derived from the Frank-Kamenetskii theory of thermal explosions provided the heat capacities, thermal conductivities and rates of heat evolution in the relevant resin-oxidant mixtures are known. It is recommended that such measurements be made and the appropriate limits be evaluated. A list of additional safety precautions are also presented to aid in the application of these limits and to provide additional margins of safety. In-line evaluation of resin degradation to assess its safety hazard is considered impractical. Rather, it is recommended that the resin be removed from use before it has received the limiting radiation dose, evaluated as described above

  7. PATENT ANALYSIS: A LOOK AT THE INNOVATIVE NATURE OF PLANT-BASED COSMETICS

    Directory of Open Access Journals (Sweden)

    Francine C. S. César

    Full Text Available The use of plants have become a important trend in cosmetic market, with a crescent number of patent applications. Despite various herbal-based ingredients have been described in scientific literature, most of them are restricted to patent databases. In this work we analyze the innovative use of plants and its derivatives in cosmetic technologies, based on patent analysis. The investigation was conducted using Derwent World Patents Index (Thomson Reuters Scientific, USA from 1995 to 2015. The search was carried out to evaluate the number of patent deposits, the patent depositors profiles, the countries with most patent applications, the International Patent Classification (IPC and the main plant families using in cosmetics. Patent analysis revealed an increase number of applications involving cosmetic containing plants components, with a higher number of deposits related to anti-ageing and whitening skin treatment. Fabaceae, Asteraceae, Rosaceae, Lamiaceae, Poaceae, Rutaceae, Lilliacae and Apiaceae were the key plant families used in cosmetic formulations for skin care treatment. Comparison between scientific and technological data pointed out divergences between patents deposits and aid-based scientific reports. The use of patent analysis in combination with scientific data opens up wider aspects of knowledge and enables a better rationalization of innovative works.

  8. Study and application of new chelating resin to recovery uranium from in-situ leach solution with high content saline chloride ion

    International Nuclear Information System (INIS)

    Zhang Jianguo; Qiu Yueshuang; Feng Yu; Deng Huidong; Zhao Chaoya

    2014-01-01

    Research on the adsorption and elution property of D814 chelating resin was carried out aiming at the difficult separation of uranium from high content saline chloride ion in situ leach liquor and the adsorption mechanism is also discussed. Influence factors such as contact time, pH value, Ca"2"+, Mg"2"+ and Cl"- concentration etc. to the resin adsorption were studied. Experimental results show that adsorption rate is lowly which need 6h to arrive at the adsorption equilibrium. The resin adsorption uranium pH in the solution is from l.33 to 9. When total salinity is over 20 g/L, calcium ion, and magnesium ion is about 3 g/L, there are no big influence on resin adsorption capacity. The resin has good chloride ion resistance. When chloride ion is over 60 g/L, it is no influence on resin adsorption uranium. Column experiment results indicate that ratio of saturation volume to break-through point volume is l.82, resin saturation uranium capacity is 40.5 mg. U/_g_(_∓_)_R. When elution volume bed number is 23, the eluted solution uranium concentration is below 80 mg/L. The elution rate of the uranium is 96.2%. (authors)

  9. Patent filing strategies: perspectives from the Cooperation Council for the Arab States of the Gulf.

    Science.gov (United States)

    Koshy, Nevin Jacob

    2016-07-01

    The protection and enforcement of intellectual property rights has become one of the most contentious issues in global commerce. Much of the traditional growth and development of countries in the Middle East over the past 30 years or so has come from oil and gas revenues. The main areas that have been covered in this article are: synopsis of patenting system in each country, the Cooperation Council for the Arab States of the Gulf patent filing system, patentability subject matter, prosecution of patent application, opposition and/or invalidation action(s) and issues that need to be resolved for an effective patent regime.

  10. Research on Technology Innovation of China's NEV Industry Based on Patent Analysis

    DEFF Research Database (Denmark)

    Wang, Jingyu; Liu, Yingqi; Kokko, Ari

    2016-01-01

    Purpose/Significance: The development of Chinas new energy vehicle(NEV) industry is concerned by both the government and enterprises. Method/Process: Based on the patent data, this paper conducts a deep analysis on the technology innovation of Chinas NEV industry from three perspectives- the year...... distribution of the patent, the distribution of the patent applicants and the distribution of patent technology area. Then, the paper makes further correlation analysis on the NEV industry chain and the patent data. Result/Conclusion: In general,the paper comprehensively reflects the whole picture of Chinas...... NEV industry technology innovation and gives some ideas for its further development....

  11. Como pesquisar o perfil patentário de um fármaco: o caso Efavirenz How to determine the patent profile of a drug: a case study of Efavirenz

    Directory of Open Access Journals (Sweden)

    Jaqueline Mendes Soares

    2010-01-01

    Full Text Available The importance of the patent system for researchers, especially in chemistry and related areas, is undeniable. In this context, this work aims at guiding the search in major search engines of patents, in order to map the patents related to a specific chemical compound and identify the material that each patent document protects. In this case study, it was performed a search for the drug efavirenz to demonstrate how to conduct a literature search in patents databases and to map patent applications at national and international levels.

  12. Decoding Gene Patents in Australia

    OpenAIRE

    Denley, Adam; Cherry, James

    2015-01-01

    Patents directed to naturally occurring genetic material, such as DNA, RNA, chromosomes, and genes, in an isolated or purified form have been granted in Australia for many years. This review provides scientists with a summary of the gene patent debate from an Australian perspective and specifically reviews how the various levels of the legal system as they apply to patents—the Australian Patent Office, Australian courts, and Australian government—have dealt with the issue of whether genetic m...

  13. Patents: Recent Trends and Puzzles

    OpenAIRE

    Zvi Griliches

    1989-01-01

    This paper reviews the historical data on patenting in the United States with special reference to the last 20 years and their potential relation, if any, to the recent productivity slowdown. Two Points are made: Patents are not a "constant-yardstick" indicator of either inventive input or output. Moreover, they are "produced" by a governmental agency which goes through its own budgetary and inefficiency cycles. The paper shows that the appearance of an absolute decline in patenting in the 19...

  14. Flowable Resin Composites: A Systematic Review and Clinical Considerations

    Science.gov (United States)

    Rodrigues, Jean C.

    2015-01-01

    Background Little is known about flowable composite materials. Most literature mentions conventional composite materials at large, giving minimal emphasis to flowables in particular. This paper briefly gives an in depth insight to the multiple facets of this versatile material. Aim To exclusively review the most salient features of flowable composite materials in comparison to conventional composites and to give clinicians a detailed understanding of the advantages, drawbacks, indications and contraindications based on composition and physical/mechanical properties. Methodology Data Sources: A thorough literature search from the year 1996 up to January 2015 was done on PubMed Central, The Cochrane Library, Science Direct, Wiley Online Library, and Google Scholar. Grey literature (pending patents, technical reports etc.) was also screened. The search terms used were “dental flowable resin composites”. Search Strategy After omitting the duplicates/repetitions, a total of 491 full text articles were assessed. As including all articles were out of the scope of this paper. Only relevant articles that fulfilled the reviewer’s objectives {mentioning indications, contraindications, applications, assessment of physical/mechanical/biological properties (in vitro/ in vivo /ex vivo)} were considered. A total of 92 full text articles were selected. Conclusion Flowable composites exhibit a variable composition and consequently variable mechanical/ physical properties. Clinicians must be aware of this aspect to make a proper material selection based on specific properties and indications of each material relevant to a particular clinical situation. PMID:26266238

  15. Scope of claim coverage in patents of fufang Chinese herbal drugs: Substitution of ingredients

    Directory of Open Access Journals (Sweden)

    Tian Jiaher

    2011-08-01

    Full Text Available Abstract Herbal ingredients in a Chinese fufang prescription are often replaced by one or several other herbal combinations. As there have been very few Chinese herbal patent infringement cases, it is still unclear how the Doctrine of Equivalents should be applied to determine the scope of 'equivalents' in Chinese fufang prescriptions. Case law principles from cases in other technical areas such as chemical patents and biological drug patents can be borrowed to ascertain a precise scope of a fufang patent. This article summarizes and discusses several chemical and biopharmaceutical patent cases. In cases where a certain herbal ingredient is substituted by another herb or a combination of herbs, accused infringers are likely to relate herbal drug patents to chemical drug patents with strict interpretation whereas patent owners may take advantage of the liberal application of Doctrine of Equivalence in biopharmaceutical patents by analogizing the complex nature of herbal drugs with biological drugs. Therefore, consideration should be given to the purpose of an ingredient in a patent, the qualities when combined with the other ingredients and the intended function. The scope of equivalents also depends on the stage of the prior art. Moreover, it is desirable to disclose any potential substitutes when drafting the application. Claims should be drafted in such a way that all foreseeable modifications are encompassed for the protection of the patent owner's intellectual property.

  16. Increase of porosity by combining semi-carbonization and KOH activation of formaldehyde resins to prepare high surface area carbons for supercapacitor applications

    Science.gov (United States)

    Heimböckel, Ruben; Kraas, Sebastian; Hoffmann, Frank; Fröba, Michael

    2018-01-01

    A series of porous carbon samples were prepared by combining a semi-carbonization process of acidic polymerized phenol-formaldehyde resins and a following chemical activation with KOH used in different ratios to increase specific surface area, micropore content and pore sizes of the carbons which is favourable for supercapacitor applications. Samples were characterized by nitrogen physisorption, powder X-ray diffraction, Raman spectroscopy and scanning electron microscopy. The results show that the amount of KOH, combined with the semi-carbonization step had a remarkable effect on the specific surface area (up to SBET: 3595 m2 g-1 and SDFT: 2551 m2 g-1), pore volume (0.60-2.62 cm3 g-1) and pore sizes (up to 3.5 nm). The carbons were tested as electrode materials for electrochemical double layer capacitors (EDLC) in a two electrode setup with tetraethylammonium tetrafluoroborate in acetonitrile as electrolyte. The prepared carbon material with the largest surface area, pore volume and pore sizes exhibits a high specific capacitance of 145.1 F g-1 at a current density of 1 A g-1. With a high specific energy of 31 W h kg-1 at a power density of 33028 W kg-1 and a short time relaxation constant of 0.29 s, the carbon showed high power capability as an EDLC electrode material.

  17. The role of patent and non-patent databases in patent research in universities

    Science.gov (United States)

    Tolstaya, A. M.; Suslina, I. V.; Tolstaya, P. M.

    2017-01-01

    This studies deal with the description and systematization of the popular patent retrieval resources. The importance of the non-patent information when conducting patent research for the intellectual property created in educational and scientific activity of the university is highlighted. The differences in the patent and non-patent information are found out. Based on the databases` analysis the authors conducted the patent research on "Wireless endoscopic capsules" (development of the NRNU MEPhI). This study can be used to facilitate the university work on the new product development in order to improve the efficiency of the process of the commercialization of the intellectual activity results, including the entering the international market.

  18. Application of neutron activation techniques and x-ray energy dispersion spectrometry, in analysis of metallic traces adsorbed by chelex-100 resin

    International Nuclear Information System (INIS)

    Fernandes, Jair C.; Amaral, Angela M.; Magalhaes, Jesus C.; Pereira, Jose S.J.; Silva, Juliana B. da; Auler, Lucia M.L.A.

    2000-01-01

    In this work, the authors have investigated optimal conditions of adsorption for several ion metallic groups (cations of heavy metals and transition metals, oxyanions metallics and metalloids and cations of rare earths), as traces (ppb), withdrawn and in mixture of groups, by chelex-100 resin. The experiments have been developed by bath techniques in ammonium acetate tamponade solution 40 mM pH 5,52 content 0,5 g of chelex-100 resin. After magnetic agitation for two hours, resins were dried and submitted to X-ray energy dispersion spectrometry, x-ray fluorescence spectrometry and neutron activation analysis. The results have demonstrated that chelex-100 resin adsorb quantitatively transition element groups and rare earth groups in two cases (withdrawn and simultaneously adsorption)

  19. Physico-chemical study of the thermal degradation of ions exchange resins of nuclear origin: research of conditions to limit the pollution transfer, application to electric cables

    International Nuclear Information System (INIS)

    Antonetti, P.

    1999-01-01

    The ions exchange resins are one solid form of radioactive wastes. They are found mainly during the demineralization operations of the water from reactors cooling systems. This study aims to determine the conditions of a thermal processing leading to the production of a smaller residue, containing the whole activity. A protocol is proposed and validated on resins allowing a decrease of the volume of 63% for 99,93% of the activity. (A.L.B.)

  20. Identification of the Key Fields and Their Key Technical Points of Oncology by Patent Analysis.

    Science.gov (United States)

    Zhang, Ting; Chen, Juan; Jia, Xiaofeng

    2015-01-01

    This paper aims to identify the key fields and their key technical points of oncology by patent analysis. Patents of oncology applied from 2006 to 2012 were searched in the Thomson Innovation database. The key fields and their key technical points were determined by analyzing the Derwent Classification (DC) and the International Patent Classification (IPC), respectively. Patent applications in the top ten DC occupied 80% of all the patent applications of oncology, which were the ten fields of oncology to be analyzed. The number of patent applications in these ten fields of oncology was standardized based on patent applications of oncology from 2006 to 2012. For each field, standardization was conducted separately for each of the seven years (2006-2012) and the mean of the seven standardized values was calculated to reflect the relative amount of patent applications in that field; meanwhile, regression analysis using time (year) and the standardized values of patent applications in seven years (2006-2012) was conducted so as to evaluate the trend of patent applications in each field. Two-dimensional quadrant analysis, together with the professional knowledge of oncology, was taken into consideration in determining the key fields of oncology. The fields located in the quadrant with high relative amount or increasing trend of patent applications are identified as key ones. By using the same method, the key technical points in each key field were identified. Altogether 116,820 patents of oncology applied from 2006 to 2012 were retrieved, and four key fields with twenty-nine key technical points were identified, including "natural products and polymers" with nine key technical points, "fermentation industry" with twelve ones, "electrical medical equipment" with four ones, and "diagnosis, surgery" with four ones. The results of this study could provide guidance on the development direction of oncology, and also help researchers broaden innovative ideas and discover new

  1. Handling sticky resin by stingless bees (Hymenoptera, Apidae

    Directory of Open Access Journals (Sweden)

    Markus Gastauer

    2011-06-01

    Full Text Available For their nest defense, stingless bees (Meliponini collect plant resins which they stick on intruders like ants or cleptobiotic robber bees causing their immobilization. The aim of this article is to identify all parts of stingless bee workers contacting these sticky resins. Of special interest are those body parts with anti-adhesive properties to resin, where it can be removed without residues. For that, extensive behavioral observations during foraging flight, handling and application of the resin have been carried out. When handling the resin, all tarsi touch the resin while walking above it. For transportation from plants to the nest during foraging flight, the resin is packed to the corbicula via tarsi and basitarsi of front and middle legs. Once stuck to the resin or after the corbicula had been unloaded, the bee's legs have to be cleaned thoroughly. Only the tips of the mandibles, that form, cut and apply the sticky resin, seem to have at least temporarily resin-rejecting properties.

  2. Ethical limitations in patenting biotechnological inventions.

    Science.gov (United States)

    Lugagnani, V

    1999-01-01

    In order to connect ethical considerations with practical limits to patentability, the moral judgement should possibly move from the exploitation of the invention to the nature and/or objectives of Research and Development (R&D) projects which have produced it: in other words, it appears quite reasonable and logical that Society is not rewarding unethical R&D activities by granting intellectual property rights. As far as biotechnology R&D is concerned, ethical guidance can be derived from the 1996 Council of EuropeOs OConvention for the protection of human rights and dignity of the human being with regard to the application of biology and medicineO, whose Chapter V - Scientific research - provides guidelines on: i. protection of persons undergoing research (e.g. informed consent); ii. protection of persons not able to consent to research; iii. research on embryos in vitro. As far as the specific point of patenting biotechnology inventions is concerned, the four exclusions prescribed by Directive 98/44/EC (i.e. human cloning, human germ-line gene therapy, use of human embryos for commercial purposes, unjustified animal suffering for medical purposes) are all we have in Europe in terms of ethical guidance to patentability. In Italy, in particular, we certainly need far more comprehensive legislation, expressing SocietyOs demand to provide ethical control of modern biotechnology. However it is quite difficult to claim that ethical concerns are being raised by currently awarded biotechnology patents related to living organisms and material thereof; they largely deal with the results of genomic R&D, purposely and usefully oriented toward improving health-care and agri-food processes, products and services. ONo patents on lifeOO can be an appealing slogan of militants against modern biotechnology, but it is far too much of an over-simplified abstraction to become the Eleventh Commandment our Society.

  3. Global Perspective for Protecting Intellectual Property - Patenting in USA and Poland

    Science.gov (United States)

    Grebski, Michalene Eva; Wolniak, Radosław

    2018-06-01

    Paper addresses the different methods for protecting intellectual property in modern knowledge-based economies. The focus of the paper is a comparison between the procedures for applying for patents in Poland and the United States. The comparison has been made from the perspective of the cost of obtaining and maintaining a patent in Poland, the United States and some other countries. The comparison has also been made from the perspective of the procedures for applying for a patent in different countries based on the Patent Cooperation Treaty. The paper also includes a comparison of the time needed for processing the patent application. Low cost provisional twelve-month patent pending protection available in the United States is also being discussed. The paper also provides some guidance and recommendations for conducting a patent search in order to validate the originality of the invention.

  4. Annotating patents with Medline MeSH codes via citation mapping.

    Science.gov (United States)

    Griffin, Thomas D; Boyer, Stephen K; Councill, Isaac G

    2010-01-01

    Both patents and Medline are important document collections for discovering new relationships between chemicals and biology, searching for prior art for patent applications and retrieving background knowledge for current research activities. Finding relevance to a topic within patents is often made difficult by poor categorization, badly written descriptions, and even intentional obfuscation. Unlike patents, the Medline corpus has Medical Subject Heading (MeSH) keywords manually added to their articles, giving a medically relevant taxonomy to the 18 million article abstracts. Our work attempts to accurately recognize the citations made in patents to Medline-indexed articles, linking them to their corresponding PubMed ID and exploiting the associated MeSH to enhance patent search by annotating the referencing patents with their Medline citations' MeSH codes. The techniques, system features, and benefits are explained.

  5. Biphenyl liquid crystalline epoxy resin as a low-shrinkage resin-based dental restorative nanocomposite.

    Science.gov (United States)

    Hsu, Sheng-Hao; Chen, Rung-Shu; Chang, Yuan-Ling; Chen, Min-Huey; Cheng, Kuo-Chung; Su, Wei-Fang

    2012-11-01

    Low-shrinkage resin-based photocurable liquid crystalline epoxy nanocomposite has been investigated with regard to its application as a dental restoration material. The nanocomposite consists of an organic matrix and an inorganic reinforcing filler. The organic matrix is made of liquid crystalline biphenyl epoxy resin (BP), an epoxy resin consisting of cyclohexylmethyl-3,4-epoxycyclohexanecarboxylate (ECH), the photoinitiator 4-octylphenyl phenyliodonium hexafluoroantimonate and the photosensitizer champhorquinone. The inorganic filler is silica nanoparticles (∼70-100 nm). The nanoparticles were modified by an epoxy silane of γ-glycidoxypropyltrimethoxysilane to be compatible with the organic matrix and to chemically bond with the organic matrix after photo curing. By incorporating the BP liquid crystalline (LC) epoxy resin into conventional ECH epoxy resin, the nanocomposite has improved hardness, flexural modulus, water absorption and coefficient of thermal expansion. Although the incorporation of silica filler may dilute the reinforcing effect of crystalline BP, a high silica filler content (∼42 vol.%) was found to increase the physical and chemical properties of the nanocomposite due to the formation of unique microstructures. The microstructure of nanoparticle embedded layers was observed in the nanocomposite using scanning and transmission electron microscopy. This unique microstructure indicates that the crystalline BP and nanoparticles support each other and result in outstanding mechanical properties. The crystalline BP in the LC epoxy resin-based nanocomposite was partially melted during exothermic photopolymerization, and the resin expanded via an order-to-disorder transition. Thus, the post-gelation shrinkage of the LC epoxy resin-based nanocomposite is greatly reduced, ∼50.6% less than in commercialized methacrylate resin-based composites. This LC epoxy nanocomposite demonstrates good physical and chemical properties and good biocompatibility

  6. The Academic Advantage: Gender Disparities in Patenting

    OpenAIRE

    Sugimoto, Cassidy R.; Ni, Chaoqun; West, Jevin D.; Larivi?re, Vincent

    2015-01-01

    We analyzed gender disparities in patenting by country, technological area, and type of assignee using the 4.6 million utility patents issued between 1976 and 2013 by the United States Patent and Trade Office (USPTO). Our analyses of fractionalized inventorships demonstrate that women's rate of patenting has increased from 2.7% of total patenting activity to 10.8% over the nearly 40-year period. Our results show that, in every technological area, female patenting is proportionally more likely...

  7. Wacky Patents Meet Economic Indicators

    DEFF Research Database (Denmark)

    Czarnitzki, Dirk; Hussinger, Katrin; Schneider, Cédric

    2011-01-01

    We investigate whether standard indicators can distinguish between “wacky” patents and a control group. Forward citations are good predictors of importance. However, “wacky” patents have higher originality, generality and citation lags, suggesting that these indicators should be interpreted...

  8. Online Patent Searching: The Realities.

    Science.gov (United States)

    Kaback, Stuart M.

    1983-01-01

    Considers patent subject searching capabilities of major online databases, noting patent claims, "deep-indexed" files, test searches, retrieval of related references, multi-database searching, improvements needed in indexing of chemical structures, full text searching, improvements needed in handling numerical data, and augmenting a…

  9. Pesticides and the Patent Bargain

    NARCIS (Netherlands)

    Timmermann, C.A.

    2015-01-01

    In order to enlarge the pool of knowledge available in the public domain, temporary exclusive rights (i.e. patents) are granted to innovators who are willing to fully disclose the information needed to reproduce their invention. After the 20-year patent protection period elapses, society should be

  10. Osteoclast differentiation inhibitors: a patent review (2008 - 2012).

    Science.gov (United States)

    Kim, Seong Hwan; Moon, Seong-Hee

    2013-12-01

    Mononuclear macrophage/monocyte-lineage hematopoietic precursors differentiate into multinucleated osteoclasts. Abnormally increased numbers and/or overactivation of osteoclasts can lead to bone loss. Therefore, pharmaceutical inhibition of osteoclast differentiation is one therapeutic strategy for mitigating the occurrence of bone loss-associated disorders and related fractures. This review surveys the patents and patent applications from 2008 to 2012 that are related to inventions of therapeutics and/or methods for inhibiting osteoclast differentiation. Over the past 20 years, the identification and validation of signaling molecules involved in osteoclast differentiation has led to a better understanding of the molecular mechanism, and to the development of new therapeutic agents for treating bone loss-associated disorders. Since 2008, 34 WO patents or patent applications have been filed that relate to inventions of therapeutics and/or methods for chemical-based, natural product-based, or biological-based inhibitors of osteoclast differentiation. Here, analysis of these patents and patent applications is presented, and summarize the disclosed osteoclast differentiation-inhibiting target molecules. This report can support further advances in the development of anti-osteoclastogenic therapeutics for bone loss-associated disorders, including osteoporosis, rheumatoid arthritis, Paget's disease, periodontal disease, osteosarcoma, and cancer bone metastasis.

  11. Sequestration Resins for Accelerating Removal of Radioactive Contaminants

    International Nuclear Information System (INIS)

    Frattini, Paul-L.; Wells, Daniel-M.; Garcia, Susan-E.; Richard, Kohlmann; Asay, Roger; Yengoyan, Leon

    2012-09-01

    The Electric Power Research Institute (EPRI) is developing sequestration resins that can be used in the treatment of nuclear plant water streams for the enhanced removal of ionic cobalt. EPRI is focusing on three key areas of success: 1. Plant safety. The resins that are synthesized must be fully tested to determine that no leachable species or decomposition products (in the event of a resin bed failure) would be introduced to the plant. 2. Acceptable system performance. The resins are currently being synthesized in a powdered form for use in the reactor water clean-up and fuel pool clean-up systems that utilize pre-coatable filter elements. The resins must have effective flocking behavior; uniform application over the underlay resin and efficient removal from the septa elements after use. Bead type resins are also under development. 3. Enhanced cobalt removal. The resins are expected to out-perform the currently used ion exchange resins in the removal of ionic cobalt. During nuclear plant maintenance or refueling outages, current ion exchange resins may require several days to reduce concentrations of cobalt (for example, radio-cobalt 60 Co and 58 Co) and other activated corrosion products to safe levels in reactor coolant streams. This performance limitation often delays key maintenance activities. EPRI's resins are expected to provide at least a three-fold increase in removal capacity in light water reactor coolants. These resins also offer the potential for higher overall removal efficiencies reducing occupational exposures and waste management costs. This paper addresses issues from the range of novel resin development for radio-cobalt removal from synthesis at the bench-top level through scale-up to demonstration of use in an actual operating nuclear power plant. (authors)

  12. 78 FR 16474 - Extension of the Period for Comments on the Enhancement of Quality of Software-Related Patents

    Science.gov (United States)

    2013-03-15

    ...] Extension of the Period for Comments on the Enhancement of Quality of Software-Related Patents AGENCY... announcing the formation of a partnership with the software community to enhance the quality of software... quality of software-related patents and the preparation of software-related patent applications including...

  13. Electron bombardment cross-linking of coating materials. Pt.2. Analysis of patent literature on formulating radiation-hardenable binders

    International Nuclear Information System (INIS)

    Mileo, J.-C.

    1976-01-01

    The process of drying paints and varnishes by electron irradiation is analyzed from the chemical standpoint. A review is made of the different methods of producing radiation hardenable resins that have resulted in abundant patent literature. These resins are classified according to the nature of the reactive unsaturations they contain: unsaturations of the maleic ester type; simple (meth)acrylic esters and amides; β-hydroxyl (meth)acrylic esters, their (un)saturated esters and other derivatives; siloxanes; maleimides; allylic unsaturations; saturated resins [fr

  14. Patent Administration by Office Computer - A Case at Mazda Motor Corporation

    Science.gov (United States)

    Kimura, Ikuo; Nakamura, Shinji

    The needs of patent administration have been diversified reflecting R&D activities under the severe competition of technical development, and business has been increased in quantity year after year as seen in patent application. Under these circumstances it is necessary to develop business mechanization which assists manual operation as much as possible to enforce the patent administration. Introducing office computer (CPU 512 KB, external memory 128 MB) for exclusive use in this purpose, Patent Department of Mazda Motor Corporation has been constructing database of patent administration centered around patent application by their own company, and utilizes it for automatic preparation of business forms, preparation of various statistical materials, and real-time reference to the application procedures.

  15. An Approach for R&D Partner Selection in Alliances between Large Companies, and Small and Medium Enterprises (SMEs: Application of Bayesian Network and Patent Analysis

    Directory of Open Access Journals (Sweden)

    Keeeun Lee

    2016-01-01

    Full Text Available The enhanced R&D cooperative efforts between large firms and small and medium-sized enterprises (SMEs have been emphasized to perform innovation projects and succeed in deploying profitable businesses. In order to promote such win-win alliances, it is necessary to consider the capabilities of large firms and SMEs, respectively. Thus, this paper proposes a new approach of partner selection when a large firm assesses SMEs as potential candidates for R&D collaboration. The first step of the suggested approach is to define the necessary technology for a firm by referring to a structured technology roadmap, which is a useful technique in the partner selection from the perspectives of a large firm. Second, a list of appropriate SME candidates is generated by patent information. Finally, a Bayesian network model is formulated to select an SME as an R&D collaboration partner which fits in the industry and the large firm by utilizing a bibliography with United States patents. This paper applies the proposed approach to the semiconductor industry and selects potential R&D partners for a large firm. This paper will explain how to use the model as a systematic and analytic approach for creating effective partnerships between large firms and SMEs.

  16. Patent arterial duct

    Directory of Open Access Journals (Sweden)

    Martin Robin P

    2009-07-01

    Full Text Available Abstract Patent arterial duct (PAD is a congenital heart abnormality defined as persistent patency in term infants older than three months. Isolated PAD is found in around 1 in 2000 full term infants. A higher prevalence is found in preterm infants, especially those with low birth weight. The female to male ratio is 2:1. Most patients are asymptomatic when the duct is small. With a moderate-to-large duct, a characteristic continuous heart murmur (loudest in the left upper chest or infraclavicular area is typical. The precordium may be hyperactive and peripheral pulses are bounding with a wide pulse pressure. Tachycardia, exertional dyspnoea, laboured breathing, fatigue or poor growth are common. Large shunts may lead to failure to thrive, recurrent infection of the upper respiratory tract and congestive heart failure. In the majority of cases of PAD there is no identifiable cause. Persistence of the duct is associated with chromosomal aberrations, asphyxia at birth, birth at high altitude and congenital rubella. Occasional cases are associated with specific genetic defects (trisomy 21 and 18, and the Rubinstein-Taybi and CHARGE syndromes. Familial occurrence of PAD is uncommon and the usual mechanism of inheritance is considered to be polygenic with a recurrence risk of 3%. Rare families with isolated PAD have been described in which the mode of inheritance appears to be dominant or recessive. Familial incidence of PAD has also been linked to Char syndrome, familial thoracic aortic aneurysm/dissection associated with patent arterial duct, and familial patent arterial duct and bicuspid aortic valve associated with hand abnormalities. Diagnosis is based on clinical examination and confirmed with transthoracic echocardiography. Assessment of ductal blood flow can be made using colour flow mapping and pulsed wave Doppler. Antenatal diagnosis is not possible, as PAD is a normal structure during antenatal life. Conditions with signs and symptoms of

  17. Chemical tools: epoxic resins; Herramientas quimicas: resinas epoxidicas

    Energy Technology Data Exchange (ETDEWEB)

    Paz, S.; Pazos, M.; Prendes, P.

    1998-10-01

    Epoxy resins are very useful products for different applications in different fields. Due to the fact that they are a highly versatile products they can be considered as chemical tools. However the epoxy resins must be correctly formulated in order to obtain the final properties. In this article an easy and reliable method to optimise the energy formulation is presented. (Author)

  18. Resin-Bonded Bridges in vitro and in vivo

    NARCIS (Netherlands)

    Veen, Johannes Hilbrandt van der

    1988-01-01

    In this thesis in vitro and in vivo studies on the clinical application of resin-bonded bridges are described and discussed. The development of different types of resin-bonded bridges is described in chapter 1. The bridges are often made by boding a cast metal retainer fitted with and artificial

  19. Deposition of SiOx thin films on Y-TZP by reactive magnetron sputtering: influence of plasma parameters on the adhesion properties between Y-TZP and resin cement for application in dental prosthesis

    Directory of Open Access Journals (Sweden)

    José Renato Calvacanti de Queiroz

    2011-01-01

    Full Text Available In this paper SiOx thin films were deposited on Y-TZP ceramics by reactive magnetron sputtering technique in order to improve the adhesion properties between Y-TZP and resin cement for applications in dental prosthesis. For fixed cathode voltage, target current, working pressure and target-to-substrate distance, SiOx thin films were deposited at different oxygen concentrations in the Ar+O2 plasma forming gas. After deposition processes, SiOx thin films were characterized by profilometry, energy dispersive spectroscopy (EDS, optical microscopy and scanning electron microscopy (SEM. Adhesion properties between Y-TZP and resin cement were evaluated by shear testing. Results indicate that films deposited at 20%O2 increased the bond strength to (32.8 ± 5.4 MPa. This value has not been achieved by traditional methods.

  20. Experimental Characterization and Modelization of Ion Exchange Kinetics for a Carboxylic Resin in Infinite Solution Volume Conditions. Application to Monovalent-Trivalent Cations Exchange

    Energy Technology Data Exchange (ETDEWEB)

    Picart, S.; Mokhtari, H.; Jobelin, I. [CEA Marcoule, Nucl Energy Div, RadioChem and Proc Dept, Actinides Chem and Convers Lab, F-30207 Bagnols Sur Ceze (France); Ramiere, I. [Fuel Simulat Lab, Fuel Study Dept, F-13108 St Paul Les Durance (France)

    2010-07-01

    This study is devoted to the characterization of ion exchange inside a microsphere of carboxylic resin. It aims at describing the kinetics of this exchange reaction which is known to be controlled by interdiffusion in the particle. The fractional attainment of equilibrium function of time depends on the concentration of the cations in the resin which can be modelled by the Nernst-Planck equation. A powerful approach for the numerical resolution of this equation is introduced in this paper. This modeling is based on the work of Helfferich but involves an implicit numerical scheme which reduces the computational cost. Knowing the diffusion coefficients of the cations in the resin and the radius of the spherical exchanger, the kinetics can be hence completely determined. When those diffusion parameters are missing, they can be deduced by fitting experimental data of fractional attainment of equilibrium. An efficient optimization tool coupled with the implicit resolution has been developed for this purpose. A monovalent/trivalent cation exchange had been experimentally characterized for a carboxylic resin. Diffusion coefficients and concentration profiles in the resin were then deduced through this new model. (authors)

  1. Experimental Characterization and Modelization of Ion Exchange Kinetics for a Carboxylic Resin in Infinite Solution Volume Conditions. Application to Monovalent-Trivalent Cations Exchange

    International Nuclear Information System (INIS)

    Picart, S.; Mokhtari, H.; Jobelin, I.; Ramiere, I.

    2010-01-01

    This study is devoted to the characterization of ion exchange inside a microsphere of carboxylic resin. It aims at describing the kinetics of this exchange reaction which is known to be controlled by interdiffusion in the particle. The fractional attainment of equilibrium function of time depends on the concentration of the cations in the resin which can be modelled by the Nernst-Planck equation. A powerful approach for the numerical resolution of this equation is introduced in this paper. This modeling is based on the work of Helfferich but involves an implicit numerical scheme which reduces the computational cost. Knowing the diffusion coefficients of the cations in the resin and the radius of the spherical exchanger, the kinetics can be hence completely determined. When those diffusion parameters are missing, they can be deduced by fitting experimental data of fractional attainment of equilibrium. An efficient optimization tool coupled with the implicit resolution has been developed for this purpose. A monovalent/trivalent cation exchange had been experimentally characterized for a carboxylic resin. Diffusion coefficients and concentration profiles in the resin were then deduced through this new model. (authors)

  2. The patentability of living organisms between science, law and ethics.

    Science.gov (United States)

    Frati, L; Foà, R; Frati, P

    1999-01-01

    The approval on May 1998 of the European Union (EU) directive on the legal protection of biotechnological inventions has aligned Europe to the international trend about the patenting of biotechnologies. Many questions are still unresolved, i.e. the differences between the article 53b of the European Patent Convention (EPC), which prohibits patenting of plants and animal varieties, whereas the directive states that Oinvention whose object are plants or animals may be patented if the practicability of the invention is not technically confined to a particular plant or animal varietyO (article 12). Again, the interpretation of plants or animal species specificity and that on the threatening public order and morality (which inhibits patenting) may have doubtful interpretations, according to the different EU States morality and law (e.g. Denmark does not admit patentability of transgenic animals). Despite difficulties, biotechnology Research and Development for applications to medicine, veterinary sciences, agriculture and foods is continuously growing. Bioethical independent evaluations of the applications of biotechnologies and of their side-effects (risk for biodiversity of plants and animals, safety of procedures to save mankind, respect of human dignity and of fundamental human rights, etc.) are mandatory to link the interests of science and industrial productions together with those of mankind. This is the original meaning given by van Potter to the word bioethics, as a bridge to the future.

  3. Microhardness of resin composite materials light-cured through fiber reinforced composite.

    NARCIS (Netherlands)

    Fennis, W.M.M.; Ray, N.J.; Creugers, N.H.J.; Kreulen, C.M.

    2009-01-01

    OBJECTIVES: To compare polymerization efficiency of resin composite basing materials when light-cured through resin composite and fiber reinforced composite (FRC) by testing microhardness. METHODS: Simulated indirect restorations were prepared by application of resin composite (Clearfil AP-X) or FRC

  4. Economic Justification of Patents and Exceptions to Patentability

    DEFF Research Database (Denmark)

    Nordberg, Ana

    2012-01-01

    The present article is the conclusion of a review of economic justifications for patent rights conducted with the objective of determining whether such arguments are per se capable of sustaining the existence of a different patentability regime for inventions of methods for treatment and diagnostic...... methods (art.53 (c) European Patent Convention). It starts by exploring the normative background and summarily describes the different types of claims allowed under the current legal framework and their differences. The following sections will describe and apply the main economic arguments sustaining...... patent rights inventions of methods for treatment and diagnostic methods. These reasoning will be later confronted with contra-arguments. This piece will finalize with the formulation of conclusions extracted from the previous debate, inter-alia that economic reasoning does not per se sustain...

  5. Technology Clusters Exploration for Patent Portfolio through Patent Abstract Analysis

    Directory of Open Access Journals (Sweden)

    Gabjo Kim

    2016-12-01

    Full Text Available This study explores technology clusters through patent analysis. The aim of exploring technology clusters is to grasp competitors’ levels of sustainable research and development (R&D and establish a sustainable strategy for entering an industry. To achieve this, we first grouped the patent documents with similar technologies by applying affinity propagation (AP clustering, which is effective while grouping large amounts of data. Next, in order to define the technology clusters, we adopted the term frequency-inverse document frequency (TF-IDF weight, which lists the terms in order of importance. We collected the patent data of Korean electric car companies from the United States Patent and Trademark Office (USPTO to verify our proposed methodology. As a result, our proposed methodology presents more detailed information on the Korean electric car industry than previous studies.

  6. Patent protection for microbial technologies.

    Science.gov (United States)

    Sherkow, Jacob S

    2017-11-01

    Microbial technologies often serve as the basis of fundamental research tools in molecular biology. These present a variety of ethical, legal and social issues concerning their patenting. This commentary presents several case studies of these issues across three major microbiological tools: CRISPR, viral vectors and antimicrobial resistance drugs. It concludes that the development of these technologies-both scientifically and commercially-depend, in part, on the patent regime available for each, and researchers' willingness to enforce those patents against others. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  7. Patenting Biotechnological Inventions in Europe

    Directory of Open Access Journals (Sweden)

    Peter Raspor

    2002-01-01

    Full Text Available The patent system has been able to provide the protection for the achievements of different technologies and in that way it has supported further development and growth of the industry where those achievements were implemented. Modern technologies like information technology and biotechnology with genetic engineering that appeared in the 70s have overgrown the frames of the existing patent system because of their exponential development during the last thirty years. Industry that invests a huge amount of money in these technologies, especially in the field of biotechnology, where the results are very uncertain, has started to claim changes in the patent system.

  8. A review of the development of resins for use in hydrometallurgy

    International Nuclear Information System (INIS)

    Green, B.R.

    1985-01-01

    Commercial resins, including cation exchangers, anion exchangers, and complexing resins, that may be suitable for use in the extraction of metals are reviewed. Areas where further research is required are considered, and potential applications that are of particular interest to the Council for Mineral Technology (Mintek), involving the recovery of uranium, gold, and the base metals, are described. Commercial resins and experimental resins developed at Mintek are evaluated, and the results are reviewed

  9. Developing a Systematic Patent Search Training Program

    Science.gov (United States)

    Zhang, Li

    2009-01-01

    This study aims to develop a systematic patent training program using patent analysis and citation analysis techniques applied to patents held by the University of Saskatchewan. The results indicate that the target audience will be researchers in life sciences, and aggregated patent database searching and advanced search techniques should be…

  10. 78 FR 31885 - Patent Term Extension

    Science.gov (United States)

    2013-05-28

    ... DEPARTMENT OF COMMERCE Patent and Trademark Office Patent Term Extension ACTION: Proposed collection; comment request. SUMMARY: The United States Patent and Trademark Office (USPTO), as part of its... States Patent and Trademark Office, P.O. Box 1450, Alexandria, VA 22313-1450. Federal Rulemaking Portal...

  11. 78 FR 7759 - Patent Cooperation Treaty

    Science.gov (United States)

    2013-02-04

    ... DEPARTMENT OF COMMERCE Patent and Trademark Office Patent Cooperation Treaty ACTION: Proposed collection; comment request. SUMMARY: The United States Patent and Trademark Office (USPTO), as part of its... States Patent and Trademark Office, P.O. Box 1450, Alexandria, VA 22313-1450. Federal Rulemaking Portal...

  12. 75 FR 20561 - Patent Term Extension

    Science.gov (United States)

    2010-04-20

    ... DEPARTMENT OF COMMERCE Patent and Trademark Office Patent Term Extension ACTION: Proposed collection; comment request. SUMMARY: The United States Patent and Trademark Office (USPTO), as part of its... Officer, Office of the Chief Information Officer, United States Patent and Trademark Office, P.O. Box 1450...

  13. Monitoring innovation in electrochemical energy storage technologies: A patent-based approach

    International Nuclear Information System (INIS)

    Mueller, Simon C.; Sandner, Philipp G.; Welpe, Isabell M.

    2015-01-01

    Highlights: • Grid effects of intermittent sources show increasing need for decentralized storage. • Novel patent classification is applied to monitor competing technologies. • Up-to-date geographical, organizational, and qualitative insight is given. • Redox flow patenting shows strong growth, lithium also strong absolute numbers. • Revealed patents allow the expectation of improved modules in the future. - Abstract: Due to the suitability to balance the intermittency in decentralized systems with renewable sources, electrochemical energy storage possibilities have been analyzed in several studies, all highlighting the need for improvements in relevant techno-economic parameters. Particularly a reduction in the costs per cycle is much needed, which could either come from innovation in more cost-efficient manufacturing methods, a higher endurance of charge/discharge sequences or higher capacities. Looking at patent applications as a metric allows us to determine whether the necessary technological progress is indeed occurring, as the mandatory publication of the underlying inventions provides access to otherwise hidden R and D activities. Our paper contributes to the literature with a compilation of technological classes related to important battery types in the novel Cooperative Patent Classification (CPC), which can be used to identify relevant patent applications of the competing technologies. Using the worldwide patent statistical database (PATSTAT), we find that promising technologies have been showing increasing patent counts in recent years. For example, the number of patent applications related to regenerative fuel cells (e.g. redox flow batteries) doubled from 2009 to 2011. Nevertheless, the volume of patent filings in technologies related to lithium remains unchallenged. Patent applications in this area are still growing, which indicates that the introduction of improved modules will continue. Using citation analysis, we have identified

  14. Effect of Resin Coating and Chlorhexidine on Microleakage of Two Resin Cements after Storage

    Directory of Open Access Journals (Sweden)

    F. Shafie

    2010-03-01

    Full Text Available Objective: Evaluating the effect of resin coating and chlorhexidine on microleakage of two resin cements after water storage.Materials and Methods: Standardized class V cavities were prepared on facial and lingual surfaces of one hundred twenty intact human molars with gingival margins placed 1mm below the cemento-enamel junction. Indirect composite inlays were fabricated and thespecimens were randomly assigned into 6 groups. In Groups 1 to 4, inlays were cemented with Panavia F2.0 cement. G1: according to the manufacturer’s instruction. G2: with light cured resin on the ED primer. G3: chlorhexidine application before priming. G4: withchlorhexidine application before priming and light cured resin on primer. G5: inlays were cemented with Nexus 2 resin cement. G6: chlorhexidine application after etching. Each group was divided into two subgroups based on the 24-hour and 6-month water storagetime. After preparation for microleakage test, the teeth were sectioned and evaluated at both margins under a 20×stereomicroscope. Dye penetration was scored using 0-3 criteria.The data was analyzed using Kruskal-Wallis and complementary Dunn tests.Results: There was significantly less leakage in G2 and G4 than the Panavia F2.0 control group at gingival margins after 6 months (P<0.05. There was no significant differences in leakage between G1 and G3 at both margins after 24 hours and 6 months storage. After 6months, G6 revealed significantly less leakage than G5 at gingival margins (P=0.033. In general, gingival margins showed more leakage than occlusal margins.Conclusion: Additionally, resin coating in self-etch (Panavia F2.0 and chlorhexidine application in etch-rinse (Nexus resin cement reduced microleakage at gingival margins after storage.

  15. The academic advantage: gender disparities in patenting.

    Science.gov (United States)

    Sugimoto, Cassidy R; Ni, Chaoqun; West, Jevin D; Larivière, Vincent

    2015-01-01

    We analyzed gender disparities in patenting by country, technological area, and type of assignee using the 4.6 million utility patents issued between 1976 and 2013 by the United States Patent and Trade Office (USPTO). Our analyses of fractionalized inventorships demonstrate that women's rate of patenting has increased from 2.7% of total patenting activity to 10.8% over the nearly 40-year period. Our results show that, in every technological area, female patenting is proportionally more likely to occur in academic institutions than in corporate or government environments. However, women's patents have a lower technological impact than that of men, and that gap is wider in the case of academic patents. We also provide evidence that patents to which women--and in particular academic women--contributed are associated with a higher number of International Patent Classification (IPC) codes and co-inventors than men. The policy implications of these disparities and academic setting advantages are discussed.

  16. Religious coalition opposes gene patents.

    Science.gov (United States)

    James, J S

    1995-05-19

    The biotechnology industry is concerned about a coalition of mainstream religious leaders, working with Jeremy Rifkin of the Foundation of Economic Trends, who oppose the patenting of human and animal life forms, body parts, and genes. The coalition called a press conference on May 18 to ask the government to prohibit the current patenting practices for genetic engineering. The biotechnology industry argues that patents indicate that a company's research tool has significant value, and encourages capitalists to invest their dollars in the development of new treatments for diseases. They also argue that the 29 biotech drugs that are on the market have been developed as a result of patents on genes. Although most business leaders are united in opposing restrictions, many scientists are divided, citing both religious and scientific reasons.

  17. Why Is Hard To Patent An Invention?

    Directory of Open Access Journals (Sweden)

    2007-01-01

    Full Text Available When employed by a company, in almost all the cases a new employee has to sign an agreement giving the company exclusive rights to any intellectual property developed as part of their work assignments. This agreement could extend beyond a change of jobs and cause conflict of interests in new employment situations. A patent is a government-granted monopoly given to an inventor as both a reward for the intellectual and financial investment, and a stimulus to innovate. As a monopoly, the patent has legal power to exclude others from exploiting the invention in any way for a period of 20 years from the time the patent application has been filed. A trademark provides instant recognition of a product or company; a service mark provides instant recognition of a service. They both have unlimited lifetime. But the owner must renew or confirm continuous use at the end of five years, and every 10 years thereafter. A trade secret is information keep secret by the owner to give him advantage over competitors. Since it is secret, a trade secret protection has unlimited lifetime.

  18. Characterization of Polyimide Matrix Resins and Prepregs

    Science.gov (United States)

    Maximovich, M. G.; Galeos, R. M.

    1985-01-01

    Graphite/polyimide composite materials are attractive candidates for a wide range of aerospace applications. They have many of the virtues of graphite/epoxies, i.e., high specific strengths and stiffness, and also outstanding thermal/oxidative stability. Yet they are not widely used in the aerospace industry due to problems of procesability. By their nature, modern addition polyimide (PI) resins and prepregs are more complex than epoxies; the key to processing lies in characterizing and understanding the materials. Chemical and rheological characterizations are carried out on several addition polyimide resins and graphite reinforced prepregs, including those based on PMR-15, LARC 160 (AP 22), LARC 160 (Curithane 103) and V378A. The use of a high range torque transducer with a Rheometrics mechanical spectrometer allows rheological data to be generated on prepreg materials as well as neat resins. The use of prepreg samples instead of neat resins eliminates the need for preimidization of the samples and the data correlates well with processing behavior found in the shop. Rheological characterization of the resins and prepregs finds significant differences not readily detected by conventional chemical characterization techniques.

  19. Technological Foresight Based on Citing and Cited Patents of Cellulose with Pharmaceutical Aplications.

    Directory of Open Access Journals (Sweden)

    Deysimar de Souza Carvalho

    2009-12-01

    Full Text Available The present study intends to present the relevance of cellulose by means of the technological foresight study through citing and cited documents from a patent application (WO 9745131 A1 as indicators of innovation. The European database of patents (espacenet was used, combining keywords and IPC. The major applicants, countries of publication and uses were mapped. The patent requests collected are mainly distributed in the area of polymers to medical devices and therapeutic methods that utilize cellulose. The results obtained revealed that the US were the main country with studies directed to this technological area (18 patent applications and the major applicant was the company Micro Therapeutics Inc. Therefore, we can understand that this is a promising technology that may reflect in an increase of R&D activities and in the patent deposits in this area.

  20. Constructing an Intelligent Patent Network Analysis Method

    Directory of Open Access Journals (Sweden)

    Chao-Chan Wu

    2012-11-01

    Full Text Available Patent network analysis, an advanced method of patent analysis, is a useful tool for technology management. This method visually displays all the relationships among the patents and enables the analysts to intuitively comprehend the overview of a set of patents in the field of the technology being studied. Although patent network analysis possesses relative advantages different from traditional methods of patent analysis, it is subject to several crucial limitations. To overcome the drawbacks of the current method, this study proposes a novel patent analysis method, called the intelligent patent network analysis method, to make a visual network with great precision. Based on artificial intelligence techniques, the proposed method provides an automated procedure for searching patent documents, extracting patent keywords, and determining the weight of each patent keyword in order to generate a sophisticated visualization of the patent network. This study proposes a detailed procedure for generating an intelligent patent network that is helpful for improving the efficiency and quality of patent analysis. Furthermore, patents in the field of Carbon Nanotube Backlight Unit (CNT-BLU were analyzed to verify the utility of the proposed method.

  1. Critical parameters for electron beam curing of cationic epoxies and property comparison of electron beam cured cationic epoxies versus thermal cured resins and composites

    International Nuclear Information System (INIS)

    Janke, C.J.; Norris, R.E.; Yarborough, K.; Lopata, V.J.

    1997-01-01

    Electron beam curing of composites is a nonthermal, nonautoclave curing process offering the following advantages compared to conventional thermal curing: substantially reduced manufacturing costs and curing times; improvements in part quality and performance; reduced environmental and health concerns; and improvements in material handling. In 1994 a Cooperative Research and Development Agreement (CRADA), sponsored by the Department of Energy Defense Programs and 10 industrial partners, was established to advance electron beam curing of composites. The CRADA has successfully developed hundreds of new toughened and untoughened resins, offering unlimited formulation and processing flexibility. Several patent applications have been filed for this work. Composites made from these easily processable, low shrinkage material match the performance of thermal cured composites and exhibit: low void contents comparable to autoclave cured composites (less than 1%); superb low water absorption values in the same range as cyanate esters (less than 1%); glass transition temperatures rivaling those of polyimides (greater than 390 C); mechanical properties comparable to high performance, autoclave cured composites; and excellent property retention after cryogenic and thermal cycling. These materials have been used to manufacture many composite parts using various fabrication processes including hand lay-up, tow placement, filament winding, resin transfer molding and vacuum assisted resin transfer molding

  2. Treatment of Simulated Soil Decontamination Waste Solution by Ferrocyanide-Anion Exchange Resin Beads

    Energy Technology Data Exchange (ETDEWEB)

    Won, Hui Jun; Kim, Min Gil; Kim, Gye Nam; Jung, Chung Hun; Park, Jin Ho; Oh, Won Zin [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2005-03-15

    Preparation of ferrocyanide-anion exchange resin and adsorption test of the prepared resin on the Cs{sup -} ion were performed. Adsorption capability of the prepared resin on the Cs{sup -} ion in the simulated citric acid based soil decontamination waste solution was 4 times greater than that of the commercial cation exchange resin. Adsorption equilibrium of the prepared resin on the Cs{sup -} ion reached within 360 minutes. Adsorption capability on the Cs{sup -} ion became to decrease above the necessary Co{sup 2-} ion concentration in the experimental range. Recycling test of the spent ion exchange resin by the successive application of hydrogen peroxide and hydrazine was also performed. It was found that desorption of Cs{sup -} ion from the resin occurred to satisfy the electroneutrality condition without any degradation of the resin.

  3. Effect of surface treatments on the bond strengths of facing composite resins to zirconia copings.

    Science.gov (United States)

    Tsumita, M; Kokubo, Y; Kano, T

    2012-09-01

    The present study evaluated and compared the bond strength between zirconia and facing composite resin using different surface conditioning methods before and after thermocycling. Four primers, three opaque resins, and two facing composite resins were used, and 10 surface treatment procedures were conducted. The bond strength was measured before and after 4,000 cycles of thermocycling. The mean values of each group were statistically analyzed using one-way analysis of variance (ANOVA). The bond strengths of facing composite resins to zirconia after various treatments varied depending on the primers, opaque resins, body resins, and thermocycling. The application of primers and opaque resins to the zirconia surface after sandblasting is expected to yield strong bond strength of the facing composite resin (Estenia CG&B) even after thermocycling.

  4. Patent Analysis of Ferritic/Martensitic Steels for the Fuel Cladding in Sodium-cooled Fast Reactor

    International Nuclear Information System (INIS)

    Baek, Jong Hyuk; Kim, Sung Ho; Kim, Tae Kyu; Kim, Woo Gon; Jang, Jin Sung; Kim, Dae Whan; Han, Chang Hee; Lee, Chan Bock

    2007-09-01

    The Korean, Japanese, U.S. and European patents related to the ferritic/martensitic steels were systematically surveyed to evaluate their patent status, which would be applicable to the fuel cladding materials for the Sodium-cooled Fast Reactor (SFR). From the surveys, totally 38 patents were finally selected for the quantitative and qualitative analysis. Among them, 28 patents (74%) were processed by Japanese companies and Sumitomo Metal industries Ltd. was top-ranked in the number (9) of priority patents. On the basis of these surveys, most patents could be applicable to the fuel cladding materials for SFR and, especially, some useful patents as the cladding were registered by the Russian and the Korean

  5. Patent Analysis of Ferritic/Martensitic Steels for the Fuel Cladding in Sodium-cooled Fast Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Baek, Jong Hyuk; Kim, Sung Ho; Kim, Tae Kyu; Kim, Woo Gon; Jang, Jin Sung; Kim, Dae Whan; Han, Chang Hee; Lee, Chan Bock

    2007-09-15

    The Korean, Japanese, U.S. and European patents related to the ferritic/martensitic steels were systematically surveyed to evaluate their patent status, which would be applicable to the fuel cladding materials for the Sodium-cooled Fast Reactor (SFR). From the surveys, totally 38 patents were finally selected for the quantitative and qualitative analysis. Among them, 28 patents (74%) were processed by Japanese companies and Sumitomo Metal industries Ltd. was top-ranked in the number (9) of priority patents. On the basis of these surveys, most patents could be applicable to the fuel cladding materials for SFR and, especially, some useful patents as the cladding were registered by the Russian and the Korean.

  6. 37 CFR 1.710 - Patents subject to extension of the patent term.

    Science.gov (United States)

    2010-07-01

    ... of Patent Term Extension of Patent Term Due to Regulatory Review § 1.710 Patents subject to extension... primarily manufactured using recombinant DNA, recombinant RNA, hybridoma technology, or other processes...

  7. Collaborative networks and patent production in Andean Community of Nations universities (UCANS, 2005-2015

    Directory of Open Access Journals (Sweden)

    Carlos Enrique Agüero Aguilar

    2017-06-01

    Full Text Available The competitiveness and technological development of a region are measured by the degree of innovation supporting them. The quantity and quality of patents generated and applied in production dynamics serve as an element for evaluation. In this sense, universities play a role as generators and transmitters of knowledge. So it is important to identify the level of their collaboration and the trends in terms of technology application in order to establish future policies for development in this sector. This article identifies the degree of collaboration, types of patents, actors (primary and secondary and dynamics of patents produced at the Andean Community of Nations universities during the period 2005-2015 and present in the European Patent Office database. In conclusion, there is a great disparity between CAN universities regarding patent production, so it is necessary to strengthen the collaborative level among universities in this community. Nevertheless, an increase is seen in the production of patents.

  8. [Application of precursor ion scanning method in rapid screening of illegally added phosphodiesterase-5 inhibitors and their unknown derivatives in Chinese traditional patent medicines and health foods].

    Science.gov (United States)

    Sun, Jing; Cao, Ling; Feng, Youlong; Tan, Li

    2014-11-01

    The compounds with similar structure often have similar pharmacological activities. So it is a trend for illegal addition that new derivatives of effective drugs are synthesized to avoid the statutory test. This bring challenges to crack down on illegal addition behavior, however, modified derivatives usually have similar product ions, which allow for precursor ion scanning. In this work, precursor ion scanning mode of a triple quadrupole mass spectrometer was first applied to screen illegally added drugs in complex matrix such as Chinese traditional patent medicines and healthy foods. Phosphodiesterase-5 inhibitors were used as experimental examples. Through the analysis of the structure and mass spectrum characteristics of the compounds, phosphodiesterase-5 inhibitors were classified, and their common product ions were screened by full scan of product ions of typical compounds. Then high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) method with precursor ion scanning mode was established based on the optimization of MS parameters. The effect of mass parameters and the choice of fragment ions were also studied. The method was applied to determine actual samples and further refined. The results demonstrated that this method can meet the need of rapid screening of unknown derivatives of phosphodiesterase-5 inhibitors in complex matrix, and prevent unknown derivatives undetected. This method shows advantages in sensitivity, specificity and efficiency, and is worth to be further investigated.

  9. Radiation curable epoxy resin

    International Nuclear Information System (INIS)

    Najvar, D.J.

    1978-01-01

    A carboxyl containing polymer is either prepared in the presence of a polyepoxide or reacted with a polyepoxide. The polymer has sufficient acid groups to react with only about 1 to 10 percent of the epoxide (oxirane) groups. The remaining epoxide groups are reacted with an unsaturated monocarboxylic acid such as acrylic or methacrylic acid to form a radiation curable resin

  10. Attribute based selection of thermoplastic resin for vacuum infusion process

    DEFF Research Database (Denmark)

    Prabhakaran, R.T. Durai; Lystrup, Aage; Løgstrup Andersen, Tom

    2011-01-01

    The composite industry looks toward a new material system (resins) based on thermoplastic polymers for the vacuum infusion process, similar to the infusion process using thermosetting polymers. A large number of thermoplastics are available in the market with a variety of properties suitable...... for different engineering applications, and few of those are available in a not yet polymerised form suitable for resin infusion. The proper selection of a new resin system among these thermoplastic polymers is a concern for manufactures in the current scenario and a special mathematical tool would...... be beneficial. In this paper, the authors introduce a new decision making tool for resin selection based on significant attributes. This article provides a broad overview of suitable thermoplastic material systems for vacuum infusion process available in today’s market. An illustrative example—resin selection...

  11. Patents, Inducement Prizes, and Contestant Strategy

    DEFF Research Database (Denmark)

    Davis, Jerome; Davis, Lee N.

    2006-01-01

    Debate over the merits of patents versus inducement prizes has tended to ignore the signaling roles of patents, and totally ignores the impact of patent signaling on prize contests. This paper asks: How does patent signaling affect the strategic choices of firms considering entering prize contests......? First, we consider contests that do not allow patenting, then contests that do. If patenting is not allowed, we argue, patent-holders, both internal and external to the contest, can adversely impact prize contests by claiming prize winner violation of their patents, and suing for damages. The likelihood...... of such challenges being made can deter entry, particularly in contests requiring large sunk costs. Furthermore, the firm's decisionmaking process will discriminate against entering prize contests and favor R&D projects with patentable outcomes. Together, these problems may circumscribe any future wider role...

  12. Ion Exchange Temperature Testing with SRF Resin - 12088

    Energy Technology Data Exchange (ETDEWEB)

    Russell, R.L.; Rinehart, D.E.; Brown, G.N.; Peterson, R.A. [Pacific Northwest National Laboratory, Richland, WA 99352 (United States)

    2012-07-01

    Ion exchange using the Spherical Resorcinol-Formaldehyde (SRF) resin has been selected by the U.S. Department of Energy's Office of River Protection for use in the Pretreatment Facility of the Hanford Tank Waste Treatment and Immobilization Plant (WTP) and for potential application in an at-tank deployment for removing Cs-137. Recent proposed changes to the WTP ion exchange process baseline indicate that higher temperatures (50 deg. C) to alleviate post-filtration precipitation issues prior to reaching the ion exchange columns may be required. Therefore, it is important to understand the behavior of SRF resin performance under the conditions expected with the new equipment and process changes. This research examined the impact of elevated temperature on resin loading and resin degradation during extended solution flow at elevated temperature (45 deg., 50 deg., 55 deg., 60 deg., 65 deg., 75 deg. C). Testing for extended times at elevated temperatures showed that the resin does degrade and loading capacity is reduced at and above 45 deg. C. Above 60 deg. C the resin appears to not load at all. It was observed that the resin disintegrated at 75 deg. C until not much was left and partially disintegrated at 65 deg. C, which caused the column to plug in both tests after ∼336 hours. The results indicate that WTP will lose resin loading capacity if the ion exchange process is performed above 25 deg. C, and the resin will disintegrate above 65 deg. C. Therefore, WTP will have a restricted operating range of temperatures to perform the ion exchange process with this resin. PNNL and WTP are currently evaluating the operating limits of the resin in further detail. Aging in 0.5 M HNO{sub 3} also caused the resin to lose capacity above 25 deg. C and to completely dissolve at 55 deg. C. Again, WTP will have a restricted operating range of temperatures when eluting the resin with nitric acid in order to maintain resin loading capacity and avoid disintegration of the resin

  13. Bituminous solidification, disposal, transport and burial of spent ion-exchange resins. Part of a coordinated programme on treatment of spent ion exchange resins

    International Nuclear Information System (INIS)

    Mozes, G.; Kristof, M.

    1983-07-01

    The project dealing with the incorporation of spent ion-exchange resins into bitumen was performed within the Agency coordinated research programme on treatment of spent ion-exchange resins. Physical and chemical properties of commercial ion-exchange resins, bitumens and bituminized resins were studied. It was shown that bitumen with low oil content and with a softening point of 60-70 deg. C are applicable for the incorporation of resins. The final waste form is allowed to contain maximum 50% resin. The comprehensive study of the biological resistance of B-30 bitumen was performed. That showed that any bacteriological attack can be regarded as generally insignificant. A continuously operating technology was realized on a semi-plant scale. The best operating conditions of this technology were determined. On the basis of the experience gained from the experiments a design of the bituminization plant of 50m 3 dry resin/year treatment capacity was proposed

  14. Patent law for computer scientists steps to protect computer-implemented inventions

    CERN Document Server

    Closa, Daniel; Giemsa, Falk; Machek, Jörg

    2010-01-01

    Written from over 70 years of experience, this overview explains patent laws across Europe, the US and Japan, and teaches readers how to think from a patent examiner's perspective. Over 10 detailed case studies are presented from different computer science applications.

  15. 78 FR 52939 - Prospective Grant of Exclusive Patent License: Use of Scopolamine to Treat Depression

    Science.gov (United States)

    2013-08-27

    ... Exclusive Patent License: Use of Scopolamine to Treat Depression AGENCY: National Institutes of Health, HHS... Application 11/137,114, filed May 25, 2005, titled ``Scopolamine for the Treatment of Depression and Anxiety... ``Scopolamine for the Treatment of Depression and Anxiety'' [HHS Ref. No. E-175-2004/0-EP-03]; 3. German Patent...

  16. 77 FR 26556 - Determination of Regulatory Review Period for Purposes of Patent Extension; EQUIDONE GEL

    Science.gov (United States)

    2012-05-04

    ... of two periods of time: A testing phase and an approval phase. For animal drug products, the testing... Cosmetic Act: July 30, 2010. The applicant claims July 27, 2010, as the date the new animal drug... Patents and Trademarks, Department of Commerce, for the extension of a patent which claims that animal...

  17. DOE patents available for licensing. A bibliography for the period 1966-1974. Supplement 1

    International Nuclear Information System (INIS)

    Thoeming, G.H.

    1983-10-01

    Abstracts and indexes are provided for 510 DOE patents or patent applications concerning any aspect of energy production, conservation, and utilization. The entries are arranged by subject category as shown in the table of contents. The bibliography covers the period from 1966 through 1974

  18. 77 FR 7080 - Changes To Implement Transitional Program for Covered Business Method Patents

    Science.gov (United States)

    2012-02-10

    ... covered business method patent review will be final and nonappealable (see 35 U.S.C. 324(e)). Section 18(a...] discloses the invention more than 1 year before the date of the application for patent in the United States... effective date set forth in section 3(n)(1)) if the disclosure had been made by another before the invention...

  19. Mercuric iodide semiconductor detectors encapsulated in polymeric resin

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Joao F. Trencher; Santos, Robinson A. dos; Ferraz, Caue de M.; Oliveira, Adriano S.; Velo, Alexandre F.; Mesquita, Carlos H. de; Hamada, Margarida M., E-mail: mmhamada@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Disch, Christian; Fiederle, Michael [Albert-Ludwigs Universität Freiburg - UniFreibrug, Freiburg Materials Research Center - FMF, Freiburg (Germany)

    2015-07-01

    The development of new semiconductor radiation detectors always finds many setback factors, such as: high concentration of impurities in the start materials, poor long term stability, the surface oxidation and other difficulties discussed extensively in the literature, that limit their use. In this work was studied, the application of a coating resin on HgI2 detectors, in order to protect the semiconductor crystal reactions from atmospheric gases and to isolate electrically the surface of the crystals. Four polymeric resins were analyzed: Resin 1: 50% - 100%Heptane, 10% - 25% methylcyclohexane, <1% cyclohexane; Resin 2: 25% - 50% ethanol, 25% - 50% acetone, <2,5% ethylacetate; Resin 3: 50% - 100% methylacetate, 5% - 10% n-butylacetate; Resin 4: 50% - 100% ethyl-2-cyanacrylat. The influence of the polymeric resin type used on the spectroscopic performance of the HgI{sub 2} semiconductor detector is, clearly, demonstrated. The better result was found for the detector encapsulated with Resin 3. An increase of up to 26 times at the stability time was observed for the detectors encapsulated compared to that non-encapsulated detector. (author)

  20. Power law distributions of patents as indicators of innovation.

    Directory of Open Access Journals (Sweden)

    Dion R J O'Neale

    Full Text Available The total number of patents produced by a country (or the number of patents produced per capita is often used as an indicator for innovation. Here we present evidence that the distribution of patents amongst applicants within many countries is well-described by power laws with exponents that vary between 1.66 (Japan and 2.37 (Poland. We suggest that this exponent is a useful new metric for studying innovation. Using simulations based on simple preferential attachment-type rules that generate power laws, we find we can explain some of the variation in exponents between countries, with countries that have larger numbers of patents per applicant generally exhibiting smaller exponents in both the simulated and actual data. Similarly we find that the exponents for most countries are inversely correlated with other indicators of innovation, such as research and development intensity or the ubiquity of export baskets. This suggests that in more advanced economies, which tend to have smaller values of the exponent, a greater proportion of the total number of patents are filed by large companies than in less advanced countries.

  1. Isotopic exchange between 232Th and 234Th using ion exchange resins and its application for the radiochemical separation of thorium and europium

    International Nuclear Information System (INIS)

    Sepulveda Munita, C.J.A.; Atalla, L.T.

    1980-01-01

    The determination of thorium via the measurement of 233 Th activity (obtained by irradiating natural thorium with neutrons) may suffer the interference of various radioisotopes which may be also formed during irradiation, if their parent isotopes are present in the sample. Taking into account this possibility, another technique was chosen for the determination of thorium, based on isotopic exchange associated with ionic exchange. Conditions for the isotopic exchange between 234 Th in solution and 232 Th in the resin were optimized. It was verified that the behaviour of 233 Th and 234 Th is the same regarding isotopic exchange with 232 Th. 234 Th was chosen for the experiments since it has a longer half-life (24.1 days) than 233 Th (22.3 min), thus facilitating the performance of the work. As the major objective of this work is to separate thorium and europium isotopes, the behaviour of 152-154 Eu was studied in the same system used for thorium, envisaging a minimum retention of these radioisotopes in the resin. In order to establish the best conditions for separating 234-Th and 152/154-Eu, the following parameters were considered: the thorium concentration in the solution; the hydrochloric acid concentration in solution; the concentration of other elements in solution; the degree of cross-linking of the resin; the flow rate of the solution through the column. The other elements added to the elutant solution were: uranium, molybdenum, lanthanum, europium, ytterbium, bromine, cobalt, barium, manganese, indium, cesium and selenium. Europium was added so to dilute the 152/154-Eu tracer and avoid the retention of the latter in the resin. The other elements were added because they give rise to radioisotopes which interfere in the activation analysis of thorium when 233-Th activity is used and, the separation of these elements from thorium will also be subsequently studied by the method used in the present work. (C.L.B.) [pt

  2. Preparation, characterization, and application of poly(vinyl alcohol)-graft-poly(ethylene glycol) resins: novel polymer matrices for solid-phase synthesis.

    Science.gov (United States)

    Luo, Juntao; Pardin, Christophe; Zhu, X X; Lubell, William D

    2007-01-01

    Spherical crosslinked poly(vinyl alcohol) (PVA) beads with good mechanical stability were prepared by reverse-suspension polymerization, using dimethyl sulfoxide (DMSO) as a cosolvent in an aqueous phase. Poly(ethylene glycol)s with varying chain lengths were grafted onto the PVA beads by anionic polymerization of ethylene oxide. The thermal behavior, morphology, and swelling were evaluated for each of the new polymer matrices. High loading and good swelling in water and organic solvents were characteristic of the PEG-grafted PVA beads. The polymer beads also exhibited good mechanical and chemical stability and were unaffected by treatment with 6 N HCl and with 6 N NaOH. The hydroxyl groups of the PVA-PEG beads were converted into aldehyde, carboxylic acid, and isocyanate functions to provide scavenger resins and were extended by way of a benzyl alcohol in a Wang linker. The transglutaminase substrates dipeptides (Z-Gln-Gly) and heptapeptides (Pro-Asn-Pro-Gln-Leu-Pro-Phe) were synthesized on PVA-PEG_5, PVA-PEG_20, and the Wang linker-derivatized PVA-PEG resins. The cleavage of the peptides from the resins using MeOH/NH3 mixture at different temperatures (0 degrees C and room temp) and 50% TFA/DCM provided, respectively, peptide methyl esters, amides, and acids in good yields and purity as assessed by LC-MS analysis.

  3. Research Funding, Patent Search Training and Technology Transfer: a collaboration

    KAUST Repository

    Tyhurst, Janis

    2016-01-01

    This paper will focus on the collaboration efforts of three different university departments to create, teach and evaluate the benefits of a joint patent training series, as well as the future directions this collaboration will take. KAUST has as one of its goals the diversification of the Saudi economy. There is a strong focus at the university on developing entrepreneurial ideas and commercializing research done. The University Library supports this goal through the provision of electronic resources and introductory patent search training skills. However, the patent training class offered by the University Library is only one step in a process that faculty and students need when starting or taking their research to the next level. In the Fall of 2015, I met with representatives of the two major stakeholders in the patent arena, the office of Sponsored Research (OSR) and the Technology Transfer Office (TTO), to develop a patent training program to meet the needs of researchers. The OSR provides funding to researchers who have demonstrated that their ideas have merit with potential applications, the TTO works with researchers who are at the point of needing IP protection. The resulting discussion led us to collaborate on creating a workshop series that benefit the researcher’s information needs and each of our departments as well. In the first of the series of three 2 hour workshops, the Manager of TTO and the Lead Integrative Specialist from the OSR presented a workshop on an overview of Intellectual Property and the patenting process. These presentations focused on when and how to determine whether research is potentially patentable, why a researcher needs to protect his/her research and how to go about protecting it. The second workshop focused on introductory patent search skills and tools, how to expand a literature search to include the information found in patents, and how this kind of research will improve not only the literature search but the research

  4. Influence of lithium and boron ions on calcium sulfo-aluminate cement hydration: application for the conditioning of boron ion exchange resins

    International Nuclear Information System (INIS)

    Dhoury, Melanie

    2015-01-01

    In pressurized water reactors, a solution of boric acid, the pH of which is controlled by the addition of lithium hydroxide, is injected in the primary circuit. Boron acts as a neutron moderator and helps controlling the fission reactions. The primary coolant is purified by flowing through columns of ion exchange resins. These resins are periodically renewed and constitute a low-level radioactive waste. In addition to radionuclides, they mainly contain borate and lithium ions. They are currently encapsulated in an organic matrix before being stored in a near-surface repository. An evolution of the process is considered, involving the replacement of the organic matrix by a mineral one. In this PhD study, the potential of calcium sulfo-aluminate cements (CSAC) to solidify/stabilize borated resins in the presence of lithium is investigated. These binders have the advantage to form hydrates which can incorporate borate ions in their structure, and their hydration is less retarded than that of Portland cement.An analytical approach is adopted, based on a progressive increase in the complexity of the investigated systems. Hydration of ye-elimite-rich CSAC is thus successively investigated in the presence of (i) lithium salts, (ii) lithium hydroxide and sodium borate, and (iii) lithium hydroxide and borated ion exchange resins. The experimental investigation is supplemented by thermodynamic modelling using a database specially developed for the needs of the study. Lithium ions are shown to accelerate CSAC hydration by decreasing the duration of the period of low thermal activity. The postulated mechanism involves the precipitation of lithium-containing aluminum hydroxide. On the contrary, sodium borate retards CSAC hydration by increasing the duration of the period of low thermal activity. Ulexite, a poorly crystallized mineral containing sodium and borates, transiently precipitates at early age. As long as ulexite is present, dissolution of ye-elimite is strongly slowed

  5. A novel classification method for aid decision of traditional Chinese patent medicines for stroke treatment.

    Science.gov (United States)

    Zhao, Yufeng; Liu, Bo; He, Liyun; Bai, Wenjing; Yu, Xueyun; Cao, Xinyu; Luo, Lin; Rong, Peijing; Zhao, Yuxue; Li, Guozheng; Liu, Baoyan

    2017-09-01

    Traditional Chinese patent medicines are widely used to treat stroke because it has good efficacy in the clinical environment. However, because of the lack of knowledge on traditional Chinese patent medicines, many Western physicians, who are accountable for the majority of clinical prescriptions for such medicine, are confused with the use of traditional Chinese patent medicines. Therefore, the aid-decision method is critical and necessary to help Western physicians rationally use traditional Chinese patent medicines. In this paper, Manifold Ranking is employed to develop the aid-decision model of traditional Chinese patent medicines for stroke treatment. First, 115 stroke patients from three hospitals are recruited in the cross-sectional survey. Simultaneously, traditional Chinese physicians determine the traditional Chinese patent medicines appropriate for each patient. Second, particular indicators are explored to characterize the population feature of traditional Chinese patent medicines for stroke treatment. Moreover, these particular indicators can be easily obtained byWestern physicians and are feasible for widespread clinical application in the future. Third, the aid-decision model of traditional Chinese patent medicines for stroke treatment is constructed based on Manifold Ranking. Experimental results reveal that traditional Chinese patent medicines can be differentiated. Moreover, the proposed model can obtain high accuracy of aid decision.

  6. How drug life-cycle management patent strategies may impact formulary management.

    Science.gov (United States)

    Berger, Jan; Dunn, Jeffrey D; Johnson, Margaret M; Karst, Kurt R; Shear, W Chad

    2016-10-01

    Drug manufacturers may employ various life-cycle management patent strategies, which may impact managed care decision making regarding formulary planning and management strategies when single-source, branded oral pharmaceutical products move to generic status. Passage of the Hatch-Waxman Act enabled more rapid access to generic medications through the abbreviated new drug application process. Patent expirations of small-molecule medications and approvals of generic versions have led to substantial cost savings for health plans, government programs, insurers, pharmacy benefits managers, and their customers. However, considering that the cost of developing a single medication is estimated at $2.6 billion (2013 dollars), pharmaceutical patent protection enables companies to recoup investments, creating an incentive for innovation. Under current law, patent protection holds for 20 years from time of patent filing, although much of this time is spent in product development and regulatory review, leaving an effective remaining patent life of 7 to 10 years at the time of approval. To extend the product life cycle, drug manufacturers may develop variations of originator products and file for patents on isomers, metabolites, prodrugs, new drug formulations (eg, extended-release versions), and fixed-dose combinations. These additional patents and the complexities surrounding the timing of generic availability create challenges for managed care stakeholders attempting to gauge when generics may enter the market. An understanding of pharmaceutical patents and how intellectual property protection may be extended would benefit managed care stakeholders and help inform decisions regarding benefit management.

  7. Patent quality and incentives at the patent office

    NARCIS (Netherlands)

    Schuett, F.

    2013-01-01

    Patent examination is a problem of moral hazard followed by adverse selection: examiners must have incentives to exert effort, but also to truthfully reveal the evidence they find. I develop a theoretical model to study the design of incentives for examiners. The model can explain the puzzling

  8. 48 CFR 1427.201 - Patent and copyright infringement liability.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Patent and copyright... INTERIOR GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patents and Copyrights 1427.201 Patent and copyright infringement liability. ...

  9. 48 CFR 27.201 - Patent and copyright infringement liability.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Patent and copyright... REGULATION GENERAL CONTRACTING REQUIREMENTS PATENTS, DATA, AND COPYRIGHTS Patents and Copyrights 27.201 Patent and copyright infringement liability. ...

  10. Fundamentals of patenting and licensing for scientists and engineers

    National Research Council Canada - National Science Library

    Ma, M. Y. (Matthew Y.)

    2009-01-01

    ... ...28 3.2 Types of Patents...28 3.3 Patent Dates ...29 viiviii Fundamentals of Patenting and Licensing for Scientists and Engineers 3.4 Eligibility of Priority Date ...30 3.5 Patentability ...32...

  11. Embedding in thermosetting resins

    International Nuclear Information System (INIS)

    Buzonniere, A. de

    1985-01-01

    Medium activity waste coming either from nuclear power plants in operation such as evaporator concentrates, spent resins, filter cartridges or the dismantling of installations are embedded in order to obtain a product suitable for long term disposal. Embedding in thermosetting resins (polyester or epoxy) is one among currently used techniques; it is being developed by the CEA (Commissariat a l'Energie Atomique) and Technicatome (subsidiary of CEA and EDF). The process is easy to operate and yields excellent results particularly as far as volume reduction and radioelement containment (cesium particularly) are concerned. The process has already been in operation in four stationary plants for several years. Extension of the process to mobile units has been completed by Technicatome in collaboration with the CEA [fr

  12. Foreign patent documentation and information research

    International Nuclear Information System (INIS)

    Wang Tongsheng; Wu Xianfeng; Liu Jia; Cao Jifen; Song Tianbao; Feng Beiyuan; Zhang Baozhu

    2014-01-01

    Patent documentations are important scientific and technical documentations, which gather legal information, technical information and economic information together. According to WIPO forecasts, making full use of patent documentation can save 40% of research funding and 60% of the study period. Foreign patent documentations are the world's most valuable patent documentations, and many original technologies that have significant influence are first disclosed in foreign patent documentation. Studying and making use of foreign patent documentations can improve our starting point of scientific and technological innovation, and reduce the research investment. This paper analyzes foreign patent documentation and, combining with the actual development of nuclear technology in our country, makes specific recommendations for patent documentation research. (authors)

  13. Effect of firm variables on patent price

    Directory of Open Access Journals (Sweden)

    Shyam Sreekumaran Nair

    2012-03-01

    Full Text Available In this study, using singleton patent auction price data from Ocean Tomo, LLC, we analyse the effect of firm variables on patent price. Patents owned by small firms attract higher price than patents owned by large firms, if they engage in multi-country filings. The patents owned by small firms get cited more than the patents owned by large firms. The patents owned by individual inventors attract a higher price than the patents owned by organisations when multi-country filings are not included. We believe that the lack of resources is preventing individual inventors from engaging in multi-country filings and maximising the revenue from their invention. A larger representative data should be used to replicate the results before generalising it.

  14. International patent analysis of water source heat pump based on orbit database

    Science.gov (United States)

    Li, Na

    2018-02-01

    Using orbit database, this paper analysed the international patents of water source heat pump (WSHP) industry with patent analysis methods such as analysis of publication tendency, geographical distribution, technology leaders and top assignees. It is found that the beginning of the 21st century is a period of rapid growth of the patent application of WSHP. Germany and the United States had done researches and development of WSHP in an early time, but now Japan and China have become important countries of patent applications. China has been developing faster and faster in recent years, but the patents are concentrated in universities and urgent to be transferred. Through an objective analysis, this paper aims to provide appropriate decision references for the development of domestic WSHP industry.

  15. Paramagnetic epoxy resin

    Directory of Open Access Journals (Sweden)

    E. C. Vazquez Barreiro

    2017-01-01

    Full Text Available This work illustrates that macrocycles can be used as crosslinking agents for curing epoxy resins, provided that they have appropriate organic functionalities. As macrocycles can complex metal ions in their structure, this curing reaction allows for the introduction of that metal ion into the resin network. As a result, some characteristic physical properties of the metallomacrocycle could be transferred to the new material. The bisphenol A diglycidyl ether (BADGE, n = 0 and hemin (a protoporphyrin IX containing the Fe(III ion, and an additional chloride ligand have been chosen. The new material has been characterized by differential scanning calorimetry (DSC, thermogravimetric analysis (TGA, Fourier Transform Infrared (FT-IR, Nuclear Magnetic Resonance (NMR, Transmission Electron Microscopy (TEM, and magnetic susceptibility measurements. Fe(III remains in the high-spin state during the curing process and, consequently, the final material exhibits the magnetic characteristics of hemin. The loss of the chlorine atom ligand during the cure of the resin allows that Fe(III can act as Lewis acid, catalyzing the crosslinking reactions. At high BADGE n = 0/hemin ratios, the formation of ether and ester bonds occurs simultaneously during the process.

  16. The Unified Patent Court (UPC), Compulsory Licensing and Competition Law

    DEFF Research Database (Denmark)

    Petersen, Clement Salung; Riis, Thomas; Schovsbo, Jens Hemmingsen

    2014-01-01

    Competition law and rules on compulsory licensing are considered as indispensable instruments to balance patent rights. In this article, we examine the room for using such balancing instruments in the context of the UPC. We analyse whether the balancing instruments will remain applicable...... that the UPC is likely to be less inclined to use them. To redress that problem we suggest that the UPC acknowledges the institutional biases of the court and looks for ways to include other values and interests than the proprietary values and interests of patent law....

  17. International Harmonization of the Patent-awarding Rules

    OpenAIRE

    Kaz Miyagiwa

    2009-01-01

    While the rest of the world issues patents to those who file applications first the U.S. do so to those who can demonstrate to have made inventions first. The U.S. has recently been under pressure to conform to the international rule. In this paper I examine the effect of international harmonization of the patent-awarding rules. In a dynamic two-country model of R&D competition for sequential inventions, I find that harmonization to the first-to-file rule can undermine innovation. This result...

  18. Natural compounds for solar photoprotection: a patent review.

    Science.gov (United States)

    Serafini, Mairim R; Guimarães, Adriana G; Quintans, Jullyana S S; Araújo, Adriano A S; Nunes, Paula S; Quintans-Júnior, Lucindo J

    2015-04-01

    Ultraviolet irradiation has deleterious effects on human skin, including tanning, sunburn, cancer and connective tissue degradation (photoaging). Botanical antioxidants have been shown to be associated with reduced incidence of photocarcinogenesis and photoaging through their photoprotective profile. Here, the authors summarized therapeutic patent applications concerning the employment of medicinal plants on the technological development of a formulation with photoprotective or photoaging application. So, the patent search was conducted in the databases WIPO, Espacenet, USPTO and Derwent, using the keywords - photoaging, photoprotection and the IPC A61K 8/97 (cosmetics or similar cleaning supplies obtained from vegetable origin, for example, plant extracts) and A61K 36/00 (medicinal preparations of undetermined constitution containing material from algae, lichens, fungi or plants, or derivatives thereof, for example, traditional herbal medicines). We found 180 patents, out of which 25 were evaluated using inclusion criteria as application of natural products with photoprotective or photoaging application. We found that some patents related to the cosmetic compositions for improving skin wrinkle and either preventing or reducing the signs of photoaging and sunburn. The cosmetic compositions are manufactured in the form of a lotion, gel, soluble liquid, cream, essence, oil-in-water-type or water-in-oil-type formulation, containing the vegetal extracts as an active ingredient.

  19. 77 FR 71004 - Patents and Inventions; Delegation of Authority

    Science.gov (United States)

    2012-11-28

    ... any actions taken that involve the exercise of the authorities delegated herein prior to the effective... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Patents and... separate delegation. The exercise of this authority must be in accordance with applicable laws, regulations...

  20. 78 FR 4211 - Setting and Adjusting Patent Fees

    Science.gov (United States)

    2013-01-18

    ... Law 112-29, 125 Stat. at 316-17. Section 10 also establishes certain procedural requirements for... optimal patent application inventory. Additionally, the fee schedule in this final rule will advance key... foundation of American economic growth and national competitiveness. Economic growth in advanced economies...

  1. Development of a High-Throughput Ion-Exchange Resin Characterization Workflow.

    Science.gov (United States)

    Liu, Chun; Dermody, Daniel; Harris, Keith; Boomgaard, Thomas; Sweeney, Jeff; Gisch, Daryl; Goltz, Bob

    2017-06-12

    A novel high-throughout (HTR) ion-exchange (IEX) resin workflow has been developed for characterizing ion exchange equilibrium of commercial and experimental IEX resins against a range of different applications where water environment differs from site to site. Because of its much higher throughput, design of experiment (DOE) methodology can be easily applied for studying the effects of multiple factors on resin performance. Two case studies will be presented to illustrate the efficacy of the combined HTR workflow and DOE method. In case study one, a series of anion exchange resins have been screened for selective removal of NO 3 - and NO 2 - in water environments consisting of multiple other anions, varied pH, and ionic strength. The response surface model (RSM) is developed to statistically correlate the resin performance with the water composition and predict the best resin candidate. In case study two, the same HTR workflow and DOE method have been applied for screening different cation exchange resins in terms of the selective removal of Mg 2+ , Ca 2+ , and Ba 2+ from high total dissolved salt (TDS) water. A master DOE model including all of the cation exchange resins is created to predict divalent cation removal by different IEX resins under specific conditions, from which the best resin candidates can be identified. The successful adoption of HTR workflow and DOE method for studying the ion exchange of IEX resins can significantly reduce the resources and time to address industry and application needs.

  2. Increasing the Discovery and Use of Non-Patent Literature (NPL): Scientific Publications in Patent Examination

    OpenAIRE

    F. Loizides; B. Diallo; A. Pollard; A. Mavri

    2017-01-01

    In this work we present findings on non-patent literature use, and specifically scientific publications such as academic articles. We interview patent examiners and observe their prior art searching in order to provide insights into the perceived usage of non-patent literature and produce high level requirements for advancing non-patent literature search tools.

  3. 77 FR 4509 - Patent Public Advisory Committee Public Hearings on the Proposed Patent Fee Schedule

    Science.gov (United States)

    2012-01-30

    ... patent fees. The publication of that Notice will open a comment window through which the public may...-P-2012-0002] Patent Public Advisory Committee Public Hearings on the Proposed Patent Fee Schedule... Trademark Office (USPTO) may set or adjust by rule any patent or trademark fee established, authorized, or...

  4. Exploring gender differences in patenting in Spain

    OpenAIRE

    Elba Mauleón; Cinzia Daraio; Maria Bordons

    2013-01-01

    The under-representation of women in science and technology is a matter of current great concern. Obtaining patent-based indicators by gender is crucial to analyse the situation of women in innovation, identify potential cases of gender inequalities, and support policy measures to promote gender balance. In this article we analyse men and women involvement in Spanish patents applied to the European Patent Office during 1990--2004. At least one female inventor is present in 18% of the patents;...

  5. Beyond Invention: Patent as Knowledge Law

    OpenAIRE

    Madison, Michael

    2017-01-01

    The decision of the Supreme Court of the United States in Bilski v. Kappos, concerning the legal standard for determining patentable subject matter under the American Patent Act, is used as a starting point for a brief review of historical, philosophical, and cultural influences on subject matter questions in both patent and copyright law. The article suggests that patent and copyright law jurisprudence was constructed initially by the Court with explicit attention to the relationship between...

  6. 14 CFR 1260.28 - Patent rights.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Patent rights. 1260.28 Section 1260.28... Provisions § 1260.28 Patent rights. Patent Rights May 2006 As stated at § 1260.136, this award is subject to... “Patent Rights (Small Business Firms and Nonprofit Organizations)” and the following: (a) Where the term...

  7. The patent, object of research in Information Science and Communication

    Directory of Open Access Journals (Sweden)

    Luc Quoniam

    2014-04-01

    Full Text Available In this study are addressed some dimensions of intellectual property, especially patents and their way of making some tangible outcomes of research and development, playing a key role in the field of strategy, involving the returns on investments and exploration rights to certain inventions. However, the general objective of this study is to present aspects of the information available in patent applications and the possibility of using them to transfer technology between countries, organizations, contribute to the research of social responsibility, valuing natural resources and provide access to medicines, once these are aspects little attention in the literature. Considering the patent as an object of study in the humanities and social sciences, is evidenced by the cases cited, the potential contribution to innovation, research and development organizations, regions and countries.

  8. System for removing contaminants from plastic resin

    Science.gov (United States)

    Bohnert, George W.; Hand, Thomas E.; DeLaurentiis, Gary M.

    2010-11-23

    A resin recycling system that produces essentially contaminant-free synthetic resin material in an environmentally safe and economical manner. The system includes receiving the resin in container form. A grinder grinds the containers into resin particles. The particles are exposed to a solvent in one or more solvent wash vessels, the solvent contacting the resin particles and substantially removing contaminants on the resin particles. A separator is used to separate the resin particles and the solvent. The resin particles are then placed in solvent removing element where they are exposed to a solvent removing agent which removes any residual solvent remaining on the resin particles after separation.

  9. 4-META opaque resin--a new resin strongly adhesive to nickel-chromium alloy.

    Science.gov (United States)

    Tanaka, T; Nagata, K; Takeyama, M; Atsuta, M; Nakabayashi, N; Masuhara, E

    1981-09-01

    1) A new adhesive opaque resin containing a reactive monomer, 4-methacryloxy-ethyl trimellitate anhydride (4-META), was prepared, and its application to thermosetting acrylic resin veneer crowns was studied. 2) The 4-META opaque resin was applied to a variety of nickel-chromium dental alloy specimens which had undergone different treatment, and endurance tests were conducted to evaluate the durability of adhesion. 3) Stable adhesion against water penetration was achieved with metal surfaces first etched with HCl and then oxidized with HNO3. A bond strength of 250 kg/cm2 was maintained even after immersion in water at 37 degrees C for 30 wk or at 80 degrees C for ten wk. Furthermore, this value did not decrease even after the specimens were subjected to 500 thermal cycles. 4) The 4-META opaque resin studied can eliminate the necessity for retention devices on metal castings. 5) The smooth 4-META opaque resin should have no adverse effects on gingivae.

  10. Patentability aspects of computational cancer models

    Science.gov (United States)

    Lishchuk, Iryna

    2017-07-01

    Multiscale cancer models, implemented in silico, simulate tumor progression at various spatial and temporal scales. Having the innovative substance and possessing the potential of being applied as decision support tools in clinical practice, patenting and obtaining patent rights in cancer models seems prima facie possible. What legal hurdles the cancer models need to overcome for being patented we inquire from this paper.

  11. 43 CFR 402.10 - Patent.

    Science.gov (United States)

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Patent. 402.10 Section 402.10 Public Lands... LANDS IN FEDERAL RECLAMATION PROJECTS Public Lands § 402.10 Patent. When a purchaser has complied fully... and patent and shall state the statutory authority for such liens. The receipt shall be submitted to...

  12. 48 CFR 970.2703 - Patent rights.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Patent rights. 970.2703 Section 970.2703 Federal Acquisition Regulations System DEPARTMENT OF ENERGY AGENCY SUPPLEMENTARY REGULATIONS DOE MANAGEMENT AND OPERATING CONTRACTS Patents, Data, and Copyrights 970.2703 Patent rights. ...

  13. 48 CFR 35.012 - Patent rights.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Patent rights. 35.012 Section 35.012 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING RESEARCH AND DEVELOPMENT CONTRACTING 35.012 Patent rights. For a discussion of patent rights, see...

  14. 37 CFR 1.705 - Patent term adjustment determination.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Patent term adjustment determination. 1.705 Section 1.705 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES Adjustment and Extension of Patent Term...

  15. Imitation, patent protection and welfare

    NARCIS (Netherlands)

    Mukherjee, A.; Pennings, H.P.G.

    2000-01-01

    Once a new technology has been invented it is shown that the innovator has an incentive to postpone technology adoption when the cost of imitation is high and patent protection is strong. With the possibility of licensing it is shown that licensing oftechnology instead of delaying technology

  16. CLASSICS UNITED STATES PATENT OFFICE

    Indian Academy of Sciences (India)

    IAS Admin

    From the profits, he became a very rich man and was able ... The Schedule referred to in these Letters Patent and making part of the same. TO ALL ... This is the real character and purpose of my invention; and in order to enable others ... kneading, it is rubbed through a hair, silk, or brass-wire sieve, (iron corrodes) and any.

  17. Patents - Overlooked Source of Information

    Czech Academy of Sciences Publication Activity Database

    Matějíček, Jiří; Ilavský, J.

    2004-01-01

    Roč. 13, č. 4 (2004), s. 473-476 ISSN 1059-9630 Institutional research plan: CEZ:AV0Z2043910 Keywords : patent * database * thermal spraying Subject RIV: JK - Corrosion ; Surface Treatment of Materials Impact factor: 1.068, year: 2004

  18. [How much does the backlog on drug patents cost for health in Brazil?

    Science.gov (United States)

    Jannuzzi, Anna Haydée Lanzillotti; Vasconcellos, Alexandre Guimarães

    2017-08-21

    The backlog in processing patent applications in Brazil has persisted since the enactment of Law 9,279/1996, when the country resumed granting patents on drugs. The agencies responsible for granting such patents, namely the Brazilian National Patent and Trademark Office (INPI) and the Brazilian National Health Surveillance Agency (Anvisa) cite technical and administrative reasons for the backlog. However, little research has focused on the economic impacts for health due to the inefficiency of the Brazilian patent system. The current study thus proposes a methodology to estimate the extent to which government procurement of medicines is burdened by the backlog in drug patent applications. According to the results, a total of more than BRL 14 million (USD 4.5 million) is spent unnecessarily per year by the Federal Government on just one antiretroviral drug due to the extension of the respective patent's life. Measures to resolve this situation are urgently needed in the three branches of government. These include hiring more staff for the INPI, analysis of bills of law under review in the two houses of the Brazilian Congress to amend the Industrial Property Law, and ruling on direct class action claims of unconstitutionality to suppress the legal mechanisms that allow extending the life of patents.

  19. Cross-Border Patent Disputes: Unified Patent Court or International Commercial Arbitration?

    OpenAIRE

    Alba Betancourt, Ana

    2016-01-01

    Currently, the enforcement of a patent that is registered in several countries involves the risk of getting different and conflicting decisions from the national courts. In 2013, 25 European countries entered in an agreement that aims to homogenise the patent system by creating the European patent with unitary effect and a Unified Patent Court (UPC). This article focuses on the UPC, which aims to have a single court proceeding for cross-border patent conflicts. Does the UPC system represent a...

  20. Development of new and improved polymer matrix resin systems, phase 1

    Science.gov (United States)

    Hsu, M. S.

    1983-01-01

    Vinystilbazole (vinylstryrylpyridine) and vinylpolystyrulpyridine were prepared for the purpose of modifying bismaleimide composite resins. Cure studies of resins systems were investigated by differential scanning calorimetry. The vinylstyrylpyridine-modified bismaleimide composite resins were found to have lower cure and gel temperatures, and shorter cure times than the corresponding unmodified composite resins. The resin systems were reinforced with commercially avialable satin-weave carbon cloth. Prepregs were fabricated by solvent or hot melt techniques. Thermal stability, flammability, moisture absorption, and mechanical properties of the composites (such as flexural strength, modulus, tensile and short beam shear strength) were determined. Composite laminates showed substantial improvements in both processability and mechanical properties compared to he bismaleimide control systems. The vinylstyrylpyridine modified bismaleimide resins can be used as advanced matrix resins for graphite secondary structures where ease of processing, fireworthiness, and high temperature stability are required for aerospace applications.

  1. Wear of resin composites: Current insights into underlying mechanisms, evaluation methods and influential factors

    Directory of Open Access Journals (Sweden)

    Akimasa Tsujimoto

    2018-05-01

    Full Text Available Summary: The application of resin composites in dentistry has become increasingly widespread due to the increased aesthetic demands of patients, improvements in the formulation of resin composites, and the ability of these materials to bond to tooth structures, together with concerns about dental amalgam fillings. As resistance to wear is an important factor in determining the clinical success of resin composite restoratives, this review article defines what constitutes wear and describes the major underlying phenomena involved in this process. Insights are further included on both in vivo and in vitro tests used to determine the wear resistance of resin composite and the relationships between these tests. The discussion focuses on factors that contribute to the wear of resin composite. Finally, future perspectives are included on both clinical and laboratory tests and on the development of resin composite restorations. Keywords: Resin composites, Wear resistance, Wear testing

  2. Contact allergy to epoxy resin

    DEFF Research Database (Denmark)

    Bangsgaard, Nannie; Thyssen, Jacob Pontoppidan; Menné, Torkil

    2012-01-01

    Background. Epoxy resin monomers are strong skin sensitizers that are widely used in industrial sectors. In Denmark, the law stipulates that workers must undergo a course on safe handling of epoxy resins prior to occupational exposure, but the effectiveness of this initiative is largely unknown...... in an educational programme. Conclusion. The 1% prevalence of epoxy resin contact allergy is equivalent to reports from other countries. The high occurrence of epoxy resin exposure at work, and the limited use of protective measures, indicate that reinforcement of the law is required....

  3. Synthesis and electrical characterization of low-temperature thermal-cured epoxy resin/functionalized silica hybrid-thin films for application as gate dielectrics

    Energy Technology Data Exchange (ETDEWEB)

    Na, Moonkyong, E-mail: nmk@keri.re.kr [HVDC Research Division, Korea Electrotechnology Research Institute, Changwon, 642-120 (Korea, Republic of); System on Chip Chemical Process Research Center, Department of Chemical Engineering, Pohang University of Science and Technology (POSTECH), Pohang, 790-784 (Korea, Republic of); Kang, Young Taec [Creative and Fundamental Research Division, Korea Electrotechnology Research Institute, Changwon, 642-120 (Korea, Republic of); Department of Polymer Science and Engineering, Pusan National University, Busan, 609-735 (Korea, Republic of); Kim, Sang Cheol [HVDC Research Division, Korea Electrotechnology Research Institute, Changwon, 642-120 (Korea, Republic of); Kim, Eun Dong [Creative and Fundamental Research Division, Korea Electrotechnology Research Institute, Changwon, 642-120 (Korea, Republic of)

    2013-07-31

    Thermal-cured hybrid materials were synthesized from homogenous hybrid sols of epoxy resins and organoalkoxysilane-functionalized silica. The chemical structures of raw materials and obtained hybrid materials were characterized using Fourier transform infrared spectroscopy. The thermal resistance of the hybrids was enhanced by hybridization. The interaction between epoxy matrix and the silica particles, which caused hydrogen bonding and van der Waals force was strengthened by organoalkoxysilane. The degradation temperature of the hybrids was improved by approximately 30 °C over that of the parent epoxy material. The hybrid materials were formed into uniformly coated thin films of about 50 nm-thick using a spin coater. An optimum mixing ratio was used to form smooth-surfaced hybrid films. The electrical property of the hybrid film was characterized, and the leakage current was found to be well below 10{sup −6} A cm{sup −2}. - Highlights: • Preparation of thermal-curable hybrid materials using epoxy resin and silica. • The thermal stability was enhanced through hybridization. • The insulation property of hybrid film was investigated as gate dielectrics.

  4. International patenting in ophthalmology: An analysis of its structure and relevance for the development of drugs and diagnostics

    Directory of Open Access Journals (Sweden)

    Hermann AM Mucke

    2008-10-01

    Full Text Available Hermann AM Mucke, Peter Mucke, Eva MuckeHM Pharma Consultancy, Vienna, AustriaAbstract: While investigative ophthalmologists access peer-reviewed journals as part of their daily routine, and while they regularly visit scientific congresses, they rarely peruse patent documents as an information source. Among the reasons for this negligence are the incompatibility of patent search algorithms with those known from journal databases, a legalistic and frequently redundant language, and misconceptions about the nature of the patenting system. Here we present key data and analyses from the ophthalmology module of a patent database system that we are developing to address some of these problems. We show that international patent applications consistently reflect developer interest in the ocular drug and diagnostics field; that they are technically focused lead indicators of developments that frequently feature in peer-reviewed patenting only much later; and that patenting targets are well aligned with the unmet therapeutic needs of populations in industrialized countries. Most applications (74%–78% in years since 2006 are supported with experimental data, and most (on average, 80%–90% faced at least one objection to patentability during their initial stage of examination. In contrast to the peer-reviewed scenery that is highly diverse, the corresponding patenting arena shows a pronounced focus on the United States.Keywords: ophthalmology, eye diseases, iontophoresis, intellectual property, patents as topic, bibliographic databases

  5. Processable polyimide adhesive and matrix composite resin

    Science.gov (United States)

    Pratt, J. Richard (Inventor); St.clair, Terry L. (Inventor); Progar, Donald J. (Inventor)

    1990-01-01

    A high temperature polyimide composition prepared by reacting 4,4'-isophthaloyldiphthalic anhydride with metaphenylenediamine is employed to prepare matrix resins, adhesives, films, coatings, moldings, and laminates, especially those showing enhanced flow with retention of mechanical and adhesive properties. It can be used in the aerospace industry, for example, in joining metals to metals or metals to composite structures. One area of application is in the manufacture of lighter and stronger aircraft and spacecraft structures.

  6. Filed and granted Indian Patents in dentistry from 2005-2009: a critical analysis and review.

    Science.gov (United States)

    Bijle, Mohammed Nadeem Ahmed; Patil, Shankargouda

    2013-01-01

    Patent policies have proved to be extremely important for several countries to develop. India has achieved its global status since 2005; a critical analysis of the patents at IPO will help us to identify the potential, available for patents with Indian Dental Fraternity. The aim of this study is to critically analyze and review Indian Patents in the field of Dentistry from 2005-2009 for evaluation of status of Indian Patents in Dentistry. A total of 110 patents were scrutinized from 2005-2009 available by IPO on www.patentoffice.nic.in. Following which a preliminary data were collected from individual patents and recorded in a record sheet. The data collected were analyzed using SPSS 16.0 software and were subjected to ANOVA test. All patents scrutinized were applied for dental materials (100%). Company applicants (70%) were the maximum followed by the individual applicants (27.2%). A total of 87.3% of patents had enrolled for International Application. Priority country had maximum favor with USA (39.2%) followed by Europe (36.1%). Single inventors (44.5%) were the maximum followed by two inventors (22.7%). Europe (37.3%) had the maximum first inventor, followed by United States of America (30%) and India (10.9%). Individual inventors were maximum in Europe (38.8%) followed by USA (20.4%) and India (16.3%). Contribution from Indian Nationals as inventors for patents in the field of Dentistry is limited, thus reducing the pace of progress and development. Indian inventors in the field of Dentistry have to go a long way to compete with the fellow mates of developed countries like USA and Europe. Continuing Dental Education programs on Intellectual property rights should be conducted on regular basis especially for Dentist's involved in research.

  7. Entrepreneurial patent management in pharmaceutical startups.

    Science.gov (United States)

    Holgersson, Marcus; Phan, Tai; Hedner, Thomas

    2016-07-01

    Startups fill an increasingly important role as innovators in the pharmaceutical industry, and patenting is typically central to their success. This article aims to explore patent management in pharmaceutical startups. The results show that startups need to deal with several challenges related to patenting and an 'entrepreneurial' approach to patent management is called for. Resource constraints, venture capital provision, exits and other conditions and events must be readily considered in the patent management process to build a successful pharmaceutical venture, something that could benefit the pharmaceutical industry as a whole. Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. Patent data mining method and apparatus

    Science.gov (United States)

    Boyack, Kevin W.; Grafe, V. Gerald; Johnson, David K.; Wylie, Brian N.

    2002-01-01

    A method of data mining represents related patents in a multidimensional space. Distance between patents in the multidimensional space corresponds to the extent of relationship between the patents. The relationship between pairings of patents can be expressed based on weighted combinations of several predicates. The user can select portions of the space to perceive. The user also can interact with and control the communication of the space, focusing attention on aspects of the space of most interest. The multidimensional spatial representation allows more ready comprehension of the structure of the relationships among the patents.

  9. Comparative analysis between academic and patent publications based on Fenton Technologies among China, Brazil, and the rest of the world.

    Science.gov (United States)

    de Luna, Airton José; Santos, Douglas Alves

    2017-03-01

    Worldwide, year by year, Fenton's Technologies have been highlighted in both academic and patent scopes, in part due to their proven efficiency as environment-friendly technologies destined to the abatement of organic pollutants, and also by their growing interest to produce industrial applications. Thus, aiming to understand the effective dynamic between two worlds, academy vs patents, the present study performs a comparative analysis about publications on Fenton-based Technologies (FbT). Therefore, in this work, technological foresight techniques were adopted focusing on patent and non-patent databases, employing for this, the Web of Science (WoS) database as a prospecting tool. The main results for the last decade point out to a strong increment of the Fenton's Technologies, as much in R&D as in patent applications in the world. Chinese Universities and firms command the scenario. There is an expressive gap between the academic and patent issues.

  10. ANALYSIS OF VENTING OF A RESIN SLURRY

    Energy Technology Data Exchange (ETDEWEB)

    Laurinat, J.; Hensel, S.

    2012-03-27

    A resin slurry venting analysis was conducted to address safety issues associated with overpressurization of ion exchange columns used in the Purex process at the Savannah River Site (SRS). If flow to these columns were inadvertently interrupted, an exothermic runaway reaction could occur between the ion exchange resin and the nitric acid used in the feed stream. The nitric acid-resin reaction generates significant quantities of noncondensable gases, which would pressurize the column. To prevent the column from rupturing during such events, rupture disks are installed on the column vent lines. The venting analysis models accelerating rate calorimeter (ARC) tests and data from tests that were performed in a vented test vessel with a rupture disk. The tests showed that the pressure inside the test vessel continued to increase after the rupture disk opened, though at a slower rate than prior to the rupture. Calculated maximum discharge rates for the resin venting tests exceeded the measured rates of gas generation, so the vent size was sufficient to relieve the pressure in the test vessel if the vent flow rate was constant. The increase in the vessel pressure is modeled as a transient phenomenon associated with expansion of the resin slurry/gas mixture upon rupture of the disk. It is postulated that the maximum pressure at the end of this expansion is limited by energy minimization to approximately 1.5 times the rupture disk burst pressure. The magnitude of this pressure increase is consistent with the measured pressure transients. The results of this analysis demonstrate the need to allow for a margin between the design pressure and the rupture disk burst pressure in similar applications.

  11. The global role of the European patent office, challenges and skills in the integration process; El papel global de la oficina Europea de Patentes retos y competencias en el proceso de integracion

    Energy Technology Data Exchange (ETDEWEB)

    Battistelli, B.

    2011-07-01

    The European Patent Office is one of the five main in the world. As such, it is involved in numerous initiatives aimed at meeting the challenges posed by the increase in the number of patent applications worldwide. To this end, the EPO co-operates closely with the patent offices in its member states and around the world. These initiatives aim at enhancing efficiency whilst maintaining very high quality standards. (Author) 4 refs.

  12. Studies of world carbon fiber industry from a perspective of patent analysis

    Institute of Scientific and Technical Information of China (English)

    郑佳

    2016-01-01

    Patents are the manifestation of the industry R&D endeavor;therefore, World carbon fiber in-dustry from the perspective of patent analysis is studied .Findings from the analysis show a continual increase of carbon fibers patents since 1969 , and the growth rate began even faster after the year of 2005.Five countries (Japan, China, US, Germany and Korea) took dominant positions in global carbon fibers R&D , and the sum of patents applied in these five countries accounted for 80%of the total patents in the world .Corporations do play an active role in global carbon fibers R&D , and over 60%of patents were applied by corporations .Among them , the top 3 corporations were all from Ja-pan, which had much more patents than the other patent assignees .Furthermore, most corporations were not active in cooperation with others , except Toyota Motor Corp .Global carbon fibers R&D fo-cused on sheet manufacture cloth , core wire layer , heat connect provide and filter activated draw . And there is big difference between Japan and China in the R&D focus .China ’ s corporations have exhibited rapid growth in the number of patent applications in recent years , but there is still a large gap between China and foreign countries in view of global patent layout and influence .By providing the insight into the evolution of global carbon fibers industrial and technological development through the perspective of patent analysis , this study hopes to provide an objective statistic reference for fu-ture policy directions and academic researches .

  13. Analysis of US patents on spacer grids

    International Nuclear Information System (INIS)

    Kim, Hyung Kyu; Song, Kee Nam; Yoon, Kyung Ho; Kang, Hong Seok; Kim, Hyung Kyu; Jeon, Tae Hyun; Oh, Dong Seok; In, Wang Ki; Bang, Jae Keun; Oh, Seung Eun; Seo, Jeong Min; Lee, Jin Seok; Park, Seong Keun

    1997-06-01

    The total of 137 US patents on spacer grids patented from 1968 through 1993 are analyzed and summarized. Database is constituted with designing the appropriate fields by which each patent can be identified. The fields consist of patent number, inventor, assignee, date of patent, title and major foci of the patent. The major foci are again classified by detailed subjects such as the fretting failure and fuel rod support-related, the strength-related, the fabrication-related as for mechanical subjects, while the cooling performance-related and the pressure drop-related as for thermal-hydraulic one. The 92% of the patents analyzed were issued form nuclear companies of USA, France and Germany. Among the patents dealing with mechanical subjects, the fretting failure and fuel rod support-related is more than the pressure drop-related among the patents of thermal-hydraulic subjects. The number of patents issued from Japan ranks just after Germany i.e., the 4th country. It is thought that much concern as well as investment should be increased in this field, the patent of nuclear components. (author). 2 tabs., 5 figs

  14. Analysis of US patents on spacer grids

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyung Kyu; Song, Kee Nam; Yoon, Kyung Ho; Kang, Hong Seok; Kim, Hyung Kyu; Jeon, Tae Hyun; Oh, Dong Seok; In, Wang Ki; Bang, Jae Keun [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Oh, Seung Eun; Seo, Jeong Min; Lee, Jin Seok; Park, Seong Keun [Korea Nuclear Fuel Company, Taejon (Korea, Republic of)

    1997-06-01

    The total of 137 US patents on spacer grids patented from 1968 through 1993 are analyzed and summarized. Database is constituted with designing the appropriate fields by which each patent can be identified. The fields consist of patent number, inventor, assignee, date of patent, title and major foci of the patent. The major foci are again classified by detailed subjects such as the fretting failure and fuel rod support-related, the strength-related, the fabrication-related as for mechanical subjects, while the cooling performance-related and the pressure drop-related as for thermal-hydraulic one. The 92% of the patents analyzed were issued form nuclear companies of USA, France and Germany. Among the patents dealing with mechanical subjects, the fretting failure and fuel rod support-related is more than the pressure drop-related among the patents of thermal-hydraulic subjects. The number of patents issued from Japan ranks just after Germany i.e., the 4th country. It is thought that much concern as well as investment should be increased in this field, the patent of nuclear components. (author). 2 tabs., 5 figs.

  15. Resin regenerating device in condensate desalting system

    International Nuclear Information System (INIS)

    Sato, Yoshiaki; Igarashi, Hiroo; Oosumi, Katsumi; Nishimura, Yusaku; Ebara, Katsuya; Shindo, Norikazu.

    1984-01-01

    Purpose: To improve the accuracy in the separation of anionic and cationic exchange resins. Constitution: Resins transferred from a condensate desalting column are charged in a cationic exchange resin column. The temperature of water for separating and transferring the resins is measured by a temperature detector disposed in a purified water injection line, and water is adjusted to a suitable flow rate for the separation and transfer of the resins by an automatic flow rate control valve, and then is injected. The resins are separated into cationic exchange resins and anionic exchange resins, in which only the anionic exchange resins are transferred, through an anionic exchange transfer line, into an anionic exchange resin column. By controlling the flow rate depending on the temperature of the injected water, the developing rate of the resin layer is made constant to enable separation and transfer of the resins at high accuracy. (Seki, T.)

  16. Idea on patent ; It is high time to stress quality

    International Nuclear Information System (INIS)

    2012-03-01

    This book deals with patent stressing on the quality, which includes from idea to technical business, It's simple to register the computer program, why do patent lawyer appoint the patent attorney's office? construction of patent right range, a good patent and a bad patent, strong patent and weak patent. It doesn't allow for Dus to use as we like, each patent has different value, Let's write technical specifications, advice on talking for invention with a patent attorney's office and what kind of task do intellectual property division do?

  17. 78 FR 46932 - Notice of Intent to Grant Exclusive Patent License; Safe Environment Engineering

    Science.gov (United States)

    2013-08-02

    ..., injury/harm, or damage; the field of use of industrial safety and monitoring to ensure plant and factory.... Patent Application No. 13/ 629,842: Method for Depicting Plume Arrival Times, Navy Case No. 101,728 and...

  18. Connecting NSF funding to patent innovation in nanotechnology (2001-2004)

    International Nuclear Information System (INIS)

    Huang Zan; Chen Hsinchun; Li Xin; Roco, Mihail C.

    2006-01-01

    Nanotechnology research has experienced growth rapid in knowledge and innovations; it also attracted significant public funding in recent years. Several countries have recognized nanotechnology as a critical research domain that promises to revolutionize a wide range of fields of applications. In this paper, we present an analysis of the funding for nanoscale science and engineering (NSE) at the National Science Foundation (NSF) and its implications on technological innovation (number of patents) in this field from 2001 to 2004. Using a combination of basic bibliometric analysis and content visualization tools, we identify growth trends, research topic distribution, and the evolution in NSF funding and commercial patenting activities recorded at the United States Patent Office (USPTO). The patent citations are used to compare the impact of the NSF-funded research on nanotechnology development with research supported by other sources in the United States and abroad. The analysis shows that the NSF-funded researchers and patents authored by them have significantly higher impact based on patent citation measures in the four-year period than other comparison groups. The NSF-authored patent impact is growing faster with the lifetime of a patent, indicating the long-term importance of fundamental research

  19. Properties of the Carboxylate ion exchange resins

    International Nuclear Information System (INIS)

    Allard, Bert; Dario, Maarten; Boren, Hans; Torstenfelt, Boerje; Puigdomenech, Ignasi; Johansson, Claes

    2002-09-01

    Weakly acidic, carboxylic resin has been selected, together with strong base anion resins, for water purification at the Forsmark 1 and 2 reactors. For the strong (but not the weak) ion exchange resin the Nuclear Power Inspectorate has given permission to dispose the spent resins in the SFR 1 (the Final Repository for Radioactive Operational Waste). This report gives a review of the carboxylic resins and comes to the conclusion that the resins are very stable and that there should not exist any risks for increased leaching of radionuclides from SFR 1 if these resins are disposed (compared to the strong resins)

  20. Modeling the Residual Stresses in Reactive Resins-Based Materials: a Case Study of Photo-Sensitive Composites for Dental Applications

    International Nuclear Information System (INIS)

    Grassia, Luigi; D'Amore, Alberto

    2010-01-01

    Residual stresses in reactive resins-based composites are associated to the net volumetric contraction (shrinkage) arising during the cross-linking reactions. Depending on the restoration geometry (the ratio of the free surface area to the volume of the cavity) the frozen-in stresses can be as high as the strength of the dental composites. This is the main reason why the effectiveness and then the durability of restorations with composites remains quite lower than those realized with metal alloys based materials. In this paper we first explore the possibility to circumvent the mathematical complexity arising from the determination of residual stresses in reactive systems three-dimensionally constrained. Then, the results of our modeling approach are applied to a series of commercially available composites showing that almost all samples develop residual stresses such that the restoration undergoes failure as soon as it is realized.

  1. Nano-enabled tribological thin film coatings: global patent scenario.

    Science.gov (United States)

    Sivudu, Kurva S; Mahajan, Yashwant R; Joshi, Shrikant V

    2014-01-01

    The aim of this paper is to present current status and future prospects of nano-enabled tribological thin film coatings based on worldwide patent landscape analysis. The study also presents an overview of technological trends by carrying out state-of-the-art literature analysis, including survey of corporate websites. Nanostructured tribological coatings encompass a wide spectrum of nanoscale microstructures, including nanocrystalline, nanolayered, nano-multilayered, nanocomposite, nanogradient structures or their unique combinations, which are composed of single or multi-component phases. The distinct microstructural features of the coatings impart outstanding tribological properties combined with multifunctional attributes to the coated components. Their unique combination of remarkable properties make them ideal candidates for a wide range of applications in diverse fields such as cutting and metalworking tools, biomedical devices, automotive engine components, wear parts, hard disc drives etc. The patent landscape analysis has revealed that nano-enabled tribological thin film coatings have significant potential for commercial applications in view of the lion's share of corporate industry in patenting activity. The largest patent portfolio is held by Japan followed by USA, Germany, Sweden and China. The prominent players involved in this field are Mitsubishi Materials Corp., Sandvik Aktiebolag, Hitachi Ltd., Sumitomo Electric Industries Ltd., OC Oerlikon Corp., and so on. The outstanding potential of nanostructured thin film tribological coatings is yet to be fully unravelled and, therefore, immense opportunities are available in future for microstructurally engineered novel coatings to enhance their performance and functionality by many folds.

  2. [Acrylic resin removable partial dentures

    NARCIS (Netherlands)

    Baat, C. de; Witter, D.J.; Creugers, N.H.J.

    2011-01-01

    An acrylic resin removable partial denture is distinguished from other types of removable partial dentures by an all-acrylic resin base which is, in principle, solely supported by the edentulous regions of the tooth arch and in the maxilla also by the hard palate. When compared to the other types of

  3. Chemoviscosity modeling for thermosetting resins

    Science.gov (United States)

    Tiwari, S. N.; Hou, T. H.; Bai, J. M.

    1985-01-01

    A chemoviscosity model, which describes viscosity rise profiles accurately under various cure cycles, and correlates viscosity data to the changes of physical properties associated with structural transformations of the thermosetting resin system during cure, was established. Work completed on chemoviscosity modeling for thermosetting resins is reported.

  4. Cure shrinkage in casting resins

    Energy Technology Data Exchange (ETDEWEB)

    Spencer, J. Brock [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-02-01

    A method is described whereby the shrinkage of a casting resin can be determined. Values for the shrinkage of several resin systems in frequent use by Sandia have been measured. A discussion of possible methods for determining the stresses generated by cure shrinkage and thermal contraction is also included.

  5. Information Extraction From Chemical Patents

    Directory of Open Access Journals (Sweden)

    Sandra Bergmann

    2012-01-01

    Full Text Available The development of new chemicals or pharmaceuticals is preceded by an indepth analysis of published patents in this field. This information retrieval is a costly and time inefficient step when done by a human reader, yet it is mandatory for potential success of an investment. The goal of the research project UIMA-HPC is to automate and hence speed-up the process of knowledge mining about patents. Multi-threaded analysis engines, developed according to UIMA (Unstructured Information Management Architecture standards, process texts and images in thousands of documents in parallel. UNICORE (UNiform Interface to COmputing Resources workflow control structures make it possible to dynamically allocate resources for every given task to gain best cpu-time/realtime ratios in an HPC environment.

  6. Phase separated thermotropic layers based on UV cured acrylate resins. Effect of material formulation on overheating protection properties and application in a solar collector

    Energy Technology Data Exchange (ETDEWEB)

    Resch, Katharina [Polymer Competence Center Leoben GmbH, Roseggerstrasse 12, 8700 Leoben (Austria); Wallner, Gernot M. [Institute of Materials Science and Testing of Plastics, University of Leoben, Franz-Josef Strasse 18, 8700 Leoben (Austria); Hausner, Robert [AEE - Institut fuer Nachhaltige Technologien (AEE-INTEC), Feldgasse 19, 8200 Gleisdorf (Austria)

    2009-09-15

    This paper focuses on the effect of material composition on the overheating protection properties of thermotropic systems with fixed domains for solar thermal collectors. Numerous functional layers were prepared by a variation of base resin (polyester-, epoxy- or urethane-acrylate) and of thermotropic additives (non-polar and polar waxes) as well as by additive concentration (5 and 7 wt%). A detailed investigation of optical properties, switching temperature and switching process was performed applying UV/Vis/NIR spectroscopy. Thermal transitions of both the thermotropic layers and the additives used were determined by Differential Scanning Calorimetry (DSC). The capability of the produced thermotropic layers to reduce stagnation temperatures in an all-polymeric flat plate collector was evaluated by theoretical modeling. The thermotropic layers showed a hemispheric solar transmittance between 76% and 87% in clear state. Above the switching threshold this transmittance changed by 1-16% to values between 62% and 85%. The layers exhibited switching temperatures between 33 and 80 C. The transition is fully completed within a temperature frame of 10-25 C. Resin types with higher glass transition temperatures were detected to benefit the reduction of the hemispheric solar transmittance above the switching threshold. This reduction was also found to increase with increasing molecular weight of the non-polar additive types. The comparison of the switching performance with the thermal transitions of the additives revealed a good correlation. Theoretical modeling showed that by the use of selected thermotropic layers in the glazing the maximum absorber temperatures can be limited to temperatures below 130 C. (author)

  7. Comparison of the shear bond strength of self-adhesive resin cements to enamel and dentin with different protocol of application.

    Science.gov (United States)

    Moghaddas, Mohammad Javad; Hossainipour, Zahra; Majidinia, Sara; Ojrati, Najmeh

    2017-08-01

    The aim of the present study was to determine the shear bond strength of self-adhesive resin cements to enamel and dentin with and without surface treatments, and compare them with conventional resin cement as the control group. In this experimental study, buccal and lingual surface of the thirty sound human premolars were polished in order to obtain a flat surface of enamel (E) in buccal, and dentin (D) in lingual. Sixty feldspathic ceramic blocks (2×3×3 mm) were prepared and randomly divided into six groups (n=10). Each block was cemented to the prepared surface (30 enamel and 30 dentin surface) according to different protocol: E1 and D1; RelyX ARC as control group, E2, D2; RelyX Unicem, E3, D3; acid etching +RelyX Unicem. The specimens were termocycled and subjected to shear forces by a universal testing machine at a cross head speed of 0.5 mm/min. The mode of fracture were evaluated by stereomicroscope. Data were analyzed with descriptive statistical methods using SPSS version 15. One-way ANOVA, and post hoc Tukey tests were used to compare bond strengths between the groups with different adhesives at α=0.05. Statistical analysis showed no significant differences within the enamel subgroups, but there were significant differences within the dentinal subgroups, and statistically significant differences were found between the groups D1and D3 (p=0.02). Comparison between similar enamel and dentinal subgroups showed that there was a significant difference just between the subgroups E3 and D3 (p=0.01). Elective etching of enamel did not lead to significant increase in the shear bond strength of RelyX Unicem in comparison to RelyX ARC. On the other hand, elective etching of dentin reduces the bond strength of RelyX Unicem with the dentin.

  8. Chelating ion exchange with macroreticular hydroxamic acid resins

    International Nuclear Information System (INIS)

    Phillips, R.J.

    1980-01-01

    The synthesis, reactions, and analytical applications of hydroxamic acids, including chelating resins with this functional group, are reviewed. A procedure for attaching N-phenyl hydroxamic acid groups to Amberlite XAD-4 is described. The extraction of 20 metal ions from 2 M hydrochloric acid by this resin is discussed. Conditions for the quantitative extraction and back-extraction of 9 ions are reported. Results are compared with work on solvent extraction with N-phenylbenzohydroxamic acid. Procedures for attaching N-methyl and N-unsubstituted hydroxamic acid groups to Amberlite XAD-4 are described. The N-phenyl, N-methyl, and N-unsubstituted hydroxamic acid resins are compared with respect to metal-ion complexation. The scope of applications for hydroxamic acid resins is investigated by studying the extraction of 19 metal ions as a function of pH. The resins are especially suitable for the extraction of zirconium(IV), titanium(IV), and uranium(IV) from strongly acidic solution. Aluminum(III) is separated from calcium and phosphate by extraction at pH 4. The use of the resins for the purification of reagents, concentration of trace constituents, and chromatographic separation is demonstrated

  9. 智能手机触摸屏专利分析%The Analysis of Smartphone Touchscreen Patents

    Institute of Scientific and Technical Information of China (English)

    袁晓东; 谢伟峰

    2014-01-01

    Touchscreen patents are the focuses of the smartphones “patent race”. The patent retrieval and patent analysis can reveal the distribution and competitive advantage of touchscreen patents. This paper uses Derwent Innovation Index to search and analyze smartphone touchscreen patents from aspects such as the application date, patent concentration and patentees. It is found that the touchscreen patent concentration shows an inverted U-shaped curve; touchscreen patent has a trend of being fragmented in recent years;Apple has more ad-vantages in the quality of touchscreen patents.%触摸屏专利是智能手机领域“专利竞赛”的焦点。专利检索和分析能够揭示触摸屏专利的分布状态和竞争优势。利用德温特专利数据库对智能手机触摸屏技术进行专利检索,从申请时间、专利集中度和专利权人等方面进行分析。专利分析显示触摸屏专利集中度呈现倒U型曲线,触摸屏专利近年来具有分散趋势,苹果公司在专利质量方面更具优势。

  10. The Coordination of Independently-Owned Vacuum Tube Patents in the Alleged Early Radio Patent Thicket

    DEFF Research Database (Denmark)

    Howells, John; Ron D, Katznelson

    -examines the legal trajectories and entrepreneurial exploitation of these patents with a focus on vacuum tube technology where Fleming’s diode patent ‘overlapped’ with earlier prior art and, dependent on court decisions, with later commercial implementations of De Forest’s triode patents. We show, by means...... of the relevant historical record, patent claims, litigation records and other relevant law, how the ‘overlapping’ patent rights were resolved by the courts and by the immunity of suppliers to the Government from patent infringement liability. We trace the cross-licensing agreements between the different radio...

  11. The Academic Advantage: Gender Disparities in Patenting

    Science.gov (United States)

    Sugimoto, Cassidy R.; Ni, Chaoqun; West, Jevin D.; Larivière, Vincent

    2015-01-01

    We analyzed gender disparities in patenting by country, technological area, and type of assignee using the 4.6 million utility patents issued between 1976 and 2013 by the United States Patent and Trade Office (USPTO). Our analyses of fractionalized inventorships demonstrate that women’s rate of patenting has increased from 2.7% of total patenting activity to 10.8% over the nearly 40-year period. Our results show that, in every technological area, female patenting is proportionally more likely to occur in academic institutions than in corporate or government environments. However, women’s patents have a lower technological impact than that of men, and that gap is wider in the case of academic patents. We also provide evidence that patents to which women—and in particular academic women—contributed are associated with a higher number of International Patent Classification (IPC) codes and co-inventors than men. The policy implications of these disparities and academic setting advantages are discussed. PMID:26017626

  12. The academic advantage: gender disparities in patenting.

    Directory of Open Access Journals (Sweden)

    Cassidy R Sugimoto

    Full Text Available We analyzed gender disparities in patenting by country, technological area, and type of assignee using the 4.6 million utility patents issued between 1976 and 2013 by the United States Patent and Trade Office (USPTO. Our analyses of fractionalized inventorships demonstrate that women's rate of patenting has increased from 2.7% of total patenting activity to 10.8% over the nearly 40-year period. Our results show that, in every technological area, female patenting is proportionally more likely to occur in academic institutions than in corporate or government environments. However, women's patents have a lower technological impact than that of men, and that gap is wider in the case of academic patents. We also provide evidence that patents to which women--and in particular academic women--contributed are associated with a higher number of International Patent Classification (IPC codes and co-inventors than men. The policy implications of these disparities and academic setting advantages are discussed.

  13. Enhanced DOC removal using anion and cation ion exchange resins.

    Science.gov (United States)

    Arias-Paic, Miguel; Cawley, Kaelin M; Byg, Steve; Rosario-Ortiz, Fernando L

    2016-01-01

    Hardness and DOC removal in a single ion exchange unit operation allows for less infrastructure, is advantageous for process operation and depending on the water source, could enhance anion exchange resin removal of dissolved organic carbon (DOC). Simultaneous application of cationic (Plus) and anionic (MIEX) ion exchange resin in a single contact vessel was tested at pilot and bench scales, under multiple regeneration cycles. Hardness removal correlated with theoretical predictions; where measured hardness was between 88 and 98% of the predicted value. Comparing bench scale DOC removal of solely treating water with MIEX compared to Plus and MIEX treated water showed an enhanced DOC removal, where removal was increased from 0.5 to 1.25 mg/L for the simultaneous resin application compared to solely applying MIEX resin. A full scale MIEX treatment plant (14.5 MGD) reduced raw water DOC from 13.7 mg/L to 4.90 mg/L in the treated effluent at a bed volume (BV) treatment rate of 800, where a parallel operation of a simultaneous MIEX and Plus resin pilot (10 gpm) measured effluent DOC concentrations of no greater than 3.4 mg/L, even at bed volumes of treatment 37.5% greater than the full scale plant. MIEX effluent compared to simultaneous Plus and MIEX effluent resulted in differences in fluorescence intensity that correlated to decreases in DOC concentration. The simultaneous treatment of Plus and MIEX resin produced water with predominantly microbial character, indicating the enhanced DOC removal was principally due to increased removal of terrestrially derived organic matter. The addition of Plus resin to a process train with MIEX resin allows for one treatment process to remove both DOC and hardness, where a single brine waste stream can be sent to sewer at a full-scale plant, completely removing lime chemical addition and sludge waste disposal for precipitative softening processes. Published by Elsevier Ltd.

  14. Relating patenting and peer-review publications: an extended perspective on the vascular health and risk management literature.

    Science.gov (United States)

    Mucke, Hermann A M

    2011-01-01

    This investigation identifies patent applications published under the international Patent Convention Treaty between July 2010 and January 2011 in three significant fields of vascular risk management (arterial hypertension, atherosclerosis, and aneurysms) and investigates whether the inventors have also published peer reviewed papers directly describing their claimed invention. Out of only 48 patent documents that specifically addressed at least one of the above-mentioned fields, 15 had immediate companion papers of which 13 were published earlier than the corresponding patent applications; the majority of these papers were published by noncorporate patentees. Although the majority of patent applications (30 documents) had at least one corporate assignee, 18 came from academic environments. As expected, medical devices dominated in the aneurysm segment while pharmacology dominated hypertension and atherosclerosis. Although information related to hypertension, atherosclerosis, or aneurysms that was claimed in international patent applications reached the public quicker through the corresponding peer review document if one was published, more than two-thirds of the patent applications had no such companion paper in a scientific journal. The patent literature, which is freely available online as full text, offers information to scientists and developers in the fields of vascular risk management that is not available from the peer reviewed literature.

  15. Effect of repair resin type and surface treatment on the repair strength of heat-polymerized denture base resin.

    Science.gov (United States)

    Alkurt, Murat; Yeşil Duymuş, Zeynep; Gundogdu, Mustafa

    2014-01-01

    methacrylate in the heat-polymerized group. A significant difference between the control and abrasion groups (P=.013) was found. The scanning electron microscopy observations showed that the application of surface treatments modified the surface of the denture base resin. The repair procedure with heat-polymerized resin exhibited significantly higher flexural strength than that of the autopolymerized and light-polymerized resins. In addition, the airborne-particle abrasion with aluminum oxide particles of 250-μm particle size improved the flexural strength of the specimens tested. Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

  16. An Overview on Indian Patents on Biotechnology.

    Science.gov (United States)

    Mallick, Anusaya; Chandra Santra, Subhas; Samal, Alok Chandra

    2015-01-01

    The application of biotechnology is a potential tool for mitigating the present and future fooding and clothing demands in developing countries like India. The commercialization of biotechnological products might benefiting the poor`s in developing countries are unlikely to be developed. Biotechnology has the potential to provide a wide range of products and the existing production skills in the industrial, pharmaceuticals and the agricultural sector. Ownership of the intellectual property rights is the key factors in determining the success of any technological invention, which was introduced in the market. It provides the means for technological progress to continue of the industry of the country. The new plans, animal varieties, new methods of treatments, new crops producing food articles as such are the inventions of biotechnology. Biotechnology is the result of the application of human intelligence and knowledge to the biological processes. Most of the tools of biotechnology have been developed, by companies, governments, research in- stitutes and universities in developed nations. These human intellectual efforts deserve protection. India is a developing country with advance biotechnology based segments of pharmaceutical and agricultural industries. The Trade Related Intellectual Property Rights (TRIPS) is not likely to have a significant impact on incentives for innovation creation in the biotechnology sectors. In the recent years, the world has seen the biotechnology sector as one of greatest investment area through the Patent Law and will giving huge profit in future. The Research and Development in the field of biotechnology should be encouraged for explor- ing new tools and improve the biological systems for interest of the common people. Priority should be given to generation, evaluation, protection and effective commercial utilization of tangible products of intellectual property in agriculture and pharmaceuticals. To support the future growth and

  17. Chromatography resin support

    Science.gov (United States)

    Dobos, James G.

    2002-01-01

    An apparatus and method of using an improved chromatography resin support is disclosed. The chromatography support platform is provided by a stainless steel hollow cylinder adapted for being inserted into a chromatography column. An exterior wall of the stainless steel cylinder defines a groove for carrying therein an "O"-ring. The upper surface of the stainless steel column is covered by a fine stainless steel mesh welded to the edges of the stainless steel cylinder. When placed upon a receiving ledge defined within a chromatography column, the "O"-ring provides a fluid tight seal with the inner edge wall of the chromatography cylinder. The stainless steel mesh supports the chromatography matrix and provides a back flushable support which is economical and simple to construct.

  18. [Acrylic resin removable partial dentures].

    Science.gov (United States)

    de Baat, C; Witter, D J; Creugers, N H J

    2011-01-01

    An acrylic resin removable partial denture is distinguished from other types of removable partial dentures by an all-acrylic resin base which is, in principle, solely supported by the edentulous regions of the tooth arch and in the maxilla also by the hard palate. When compared to the other types of removable partial dentures, the acrylic resin removable partial denture has 3 favourable aspects: the economic aspect, its aesthetic quality and the ease with which it can be extended and adjusted. Disadvantages are an increased risk of caries developing, gingivitis, periodontal disease, denture stomatitis, alveolar bone reduction, tooth migration, triggering of the gag reflex and damage to the acrylic resin base. Present-day indications are ofa temporary or palliative nature or are motivated by economic factors. Special varieties of the acrylic resin removable partial denture are the spoon denture, the flexible denture fabricated of non-rigid acrylic resin, and the two-piece sectional denture. Furthermore, acrylic resin removable partial dentures can be supplied with clasps or reinforced by fibers or metal wires.

  19. Alienation from the Objectives of the Patent System: How to Remedy the Situation of Biotechnology Patent.

    Science.gov (United States)

    Jiang, Li

    2018-03-12

    Some fundamental biotechnologies hold unprecedented potential to eradicate many incurable diseases. However, in absence of regulations, the power of patent makes the future use of some important biotechnology in few institution's hands. The excessive patents restrict researcher access to the fundamental technologies. It generates concerns and complaints of deteriorating the public health and social welfare. Furthermore, intellectual curiosities, funding, respect among colleagues etc., rather than patents, are the real motivations driving a major ground-breaking discoveries in biotechnology. These phenomena reveal that some biotechnology patents are alienated from the purpose of patent system. Therefore, it is necessary to take some approaches to stop over-patenting these fundamental biotechnology inventions. This article proposes a model regulatory framework for controlling biotechnology patent alienating from the purpose of patent system.

  20. A fruitful decade from 2005 to 2014 for anthraquinone patents.

    Science.gov (United States)

    Hussain, Hidayat; Al-Harrasi, Ahmed; Al-Rawahi, Ahmed; Green, Ivan R; Csuk, René; Ahmed, Ishtiaq; Shah, Afzah; Abbas, Ghulam; Rehman, Najeeb Ur; Ullah, Riaz

    2015-01-01

    Anthraquinones are aromatic compounds whose structures are related to anthracene (parent structure: 9,10-dioxoanthracene) for which various methods for their synthesis have been developed. In the past decade (2005 - 2014), much work has been done regarding anthraquinone chemistry in order to discover new compounds related to this scaffold as anticancer, antibacterial, antidiabetic, antiviral, anti-HCV, antifibrotic, fungicidal and anti-inflammatory agents. This review covers the patents on therapeutic activities of anthraquinones and their derivatives in the years between 2005 and 2014. A large portion of the therapeutic applications that were reported in international patents will be presented and discussed. Although a large number of patents have been registered over the last decade, this review is focused on important patents related to cancer, inflammation, infectious diseases, diabetic conditions and hepatitis C. The tricyclic planar ring system of anthraquinones displays a wide range of important pharmaceutical properties. By linking active anthraquinone analogs to other important pharmacophores or conjugates such as oximes, N-heterocycles, benzodiazepines or glycosyl ethers, their anticancer potential is enhanced. The ability of anthraquinone analogs to become more prominent as novel pharmaceutical agents may further be enhanced by fusing functionalized heterocyclic rings onto established anthraquinone cores.

  1. Conditioning radioactive wastes by means of thermosetting resins

    International Nuclear Information System (INIS)

    Auboing, G.; Limongi, A.; Thiery, D.

    1976-01-01

    The principle of the conditioning process of low and medium activity wastes by means of thermosetting resins is described. The two major phases of its application, viz: pre-treatment and coating are analysed. Finally as an example, the plant where this conditioning process is put into application (currently in operation at the Nuclear Study Center of Grenoble) is described [fr

  2. 37 CFR 1.314 - Issuance of patent.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Issuance of patent. 1.314 Section 1.314 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES National Processing Provisions Allowance and Issue of...

  3. 37 CFR 11.9 - Limited recognition in patent matters.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Limited recognition in patent matters. 11.9 Section 11.9 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE REPRESENTATION OF OTHERS BEFORE THE UNITED STATES PATENT AND TRADEMARK OFFICE...

  4. 37 CFR 1.315 - Delivery of patent.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Delivery of patent. 1.315 Section 1.315 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE GENERAL RULES OF PRACTICE IN PATENT CASES National Processing Provisions Allowance and Issue of...

  5. Measurements of volatile compound contents in resins using a moisture analyzer.

    Science.gov (United States)

    Hashimoto, Masanori; Nagano, Futami; Endo, Kazuhiko; Ohno, Hiroki

    2010-02-01

    The contents of volatile adhesive compounds, such as water, solvents, and residual unpolymerized monomers, affect the integrity and durability of adhesive bonding. However, there is no method available that can be used to rapidly assess the residual solvent or water contents of adhesive resins. This study examined the effectiveness of a digital moisture analyzer to measure the volatile compound contents of resins. Five self-etching adhesives and seven experimental light-cured resins prepared with different contents (0, 10, and 20% by weight) of water or solvents (acetone and ethanol) were examined in this study. The resins were prepared using different methods (with and without air blast or light-curing) to simulate the clinical conditions of adhesive application. Resin weight changes (% of weight loss) were determined as the residual volatile compound contents, using the moisture analyzer. After the measurements, the resin films were examined using a scanning electron microscope. The weight changes of the resins were found to depend on the amount of water or solvents evaporating from the resin. Water and solvents were evaporated by air blast or light-curing, but some of the water and solvents remained in the cured resin. The moisture analyzer is easy to operate and is a useful instrument for using to measure the residual volatile compound contents of adhesive resin.

  6. Ballistic properties of bidirectional fiber/resin composites

    International Nuclear Information System (INIS)

    Dimeski, Dimko; Spaseska, Dijana

    2004-01-01

    The aim of the research was to make evaluation of the ballistic strength of four different fiber/resin composites intended to be used in manufacturing of ballistic items for personal protection. Research has been performed on glass, ballistic nylon, aramid and HPPE (High Performance Polyethylene) plainly woven fabric based composites. As a matrix system, in all cases, polyvinylbutyral modified phenolic resin was used. For the investigation, areal weight range 2 - 9 kg/m 2 chosen was, which is applicable for personal ballistic protection and the ultimate resin content range 20 - 50 vol.%. Ballistic test of the composites has shown that the best results exhibit HPPE based composites; aramid based composites have been the second best followed by the polyamide based composites. The worst results have been shown by the glass based composites. All composites with lower resin content (20%) have performed much better than their counterparts with higher resin content (50 %).The plot of the ballistic strength (V 50 ) versus areal weight has shown a linear increase of V 50 with the increase of areal weight. The ballistic strength of the composites is highly dependant on the fiber/resin ratio and increases with the increase of the fiber content. (Author)

  7. Marginal adaptation of composite resins under two adhesive techniques.

    Science.gov (United States)

    Dačić, Stefan; Veselinović, Aleksandar M; Mitić, Aleksandar; Nikolić, Marija; Cenić, Milica; Dačić-Simonović, Dragica

    2016-11-01

    In the present research, different adhesive techniques were used to set up fillings with composite resins. After the application of etch and rinse or self etch adhesive technique, marginal adaptation of composite fillings was estimated by the length of margins without gaps, and by the microretention of resin in enamel and dentin. The study material consisted of 40 extracted teeth. Twenty Class V cavities were treated with 35% phosphorous acid and restored after rinsing by Adper Single Bond 2 and Filtek Ultimate-ASB/FU 3M ESPE composite system. The remaining 20 cavities were restored by Adper Easy One-AEO/FU 3M ESPE composite system. Marginal adaptation of composite fillings was examined using a scanning electron microscope (SEM). The etch and rinse adhesive technique showed a significantly higher percentage of margin length without gaps (in enamel: 92.5%, in dentin: 57.3%), compared with the self-etch technique with lower percentage of margin length without gaps, in enamel 70.4% (p resin tugs in interprismatic spaces of enamel, while the dentin microretention was composed of adhesive and hybrid layers with resin tugs in dentin canals. In the second technique, resin tugs were rarely seen and a microgap was dominant along the border of restoration margins. The SEM analysis showed a better marginal adaptation of composite resin to enamel and dentin with better microretention when the etch and rinse adhesive procedure was applied. © 2016 Wiley Periodicals, Inc.

  8. Performance of Patenting Firms in Danish Manufacturing

    DEFF Research Database (Denmark)

    Madsen, Erik Strøjer; Smith, Valdemar; Nielsen, Anders Østergaard

    2000-01-01

    Most countries focus on industries with high technology and the governments grant subsidies to innovating firms. However, there has been remarkable few studies of the performance of innovative firms or industries. This study examines the performance of patent active firms compared to the non-patenting...... firms within the manufacturing sector in Denmark. Performance is measured both by growth in employment as well as in the return on equity and profit share in turnover. The results suggest that differences in performance of patenting and non-patenting firms are very small, which questions the political...

  9. The History of Patenting Genetic Material.

    Science.gov (United States)

    Sherkow, Jacob S; Greely, Henry T

    2015-01-01

    The US Supreme Court's recent decision in Association for Molecular Pathology v. Myriad Genetics, Inc. declared, for the first time, that isolated human genes cannot be patented. Many have wondered how genes were ever the subjects of patents. The answer lies in a nuanced understanding of both legal and scientific history. Since the early twentieth century, "products of nature" were not eligible to be patented unless they were "isolated and purified" from their surrounding environment. As molecular biology advanced, and the capability to isolate genes both physically and by sequence came to fruition, researchers (and patent offices) began to apply patent-law logic to genes themselves. These patents, along with other biological patents, generated substantial social and political criticism. Myriad Genetics, a company with patents on BRCA1 and BRCA2, two genes critical to assessing early-onset breast and ovarian cancer risk, and with a particularly controversial business approach, became the antagonist in an ultimately successful campaign to overturn gene patents in court. Despite Myriad's defeat, some questions concerning the rights to monopolize genetic information remain. The history leading to that defeat may be relevant to these future issues.

  10. Patents and Innovation: Friends or Foes?

    OpenAIRE

    Lévêque, François

    2007-01-01

    Over 2 million patents are currently in force in the EU and in the USA. Do they testify innovation is blockaded for they restrict freedom in research or do they give evidence innovation is flourishing for patent law provides incentives to invent new products and processes? In other terms do patents freeze or spur innovation? The question arises for massive anecdotal evidence shows the patent system may have turned on its head, e.g., USPTO and EPO examiners spend less than 30 hours pe...

  11. Interfacial adhesion improvement in carbon fiber/carbon nanotube reinforced hybrid composites by the application of a reactive hybrid resin initiated by gamma irradiation

    Science.gov (United States)

    Szebényi, G.; Faragó, D.; Lámfalusi, Cs.; Göbl, R.

    2018-04-01

    Interfacial adhesion is a key factor in composite materials. The effective co-working of the reinforcing materials and matrix is essential for the proper load transfer between them, and to achieve the desired reinforcing effect. In case of nanocomposites, especially carbon nanotube (CNT) reinforced nanocomposites the adhesion between the CNTs and the polymer matrix is poor. To improve the interfacial adhesion and exploit the reinforcing effect of these nanoparticles a two step curable epoxy (EP)/vinylester (VE) hybrid resin system was developed where the EP is cured using hardener in the first step, during the composite production, and in the second step the curing of the VE is initiated by gamma irradiation, which also activates the reinforcing materials and the cured matrix component. A total of six carbon fiber reinforced composite systems were compared with neat epoxy and EP/VE hybrid matrices with and without chemical initiator and MWCNT nano-reinforcement. The effect of gamma irradiation was investigated at four absorbed dose levels. According to our three point bending and interlaminar shear test results the adhesion has improved between all constituents of the composite system. It was demonstrated that gamma irradiation has beneficial effect on the static mechanical, especially interlaminar properties of both micro- and nanocomposites in terms of modulus, strength and interlaminar shear strength.

  12. 48 CFR 970.5227-10 - Patent rights-management and operating contracts, nonprofit organization or small business firm...

    Science.gov (United States)

    2010-10-01

    ... exceptional circumstance subject inventions. (3) Treaties and international agreements. Any rights acquired by..., or public use. The Contractor will file patent applications in additional countries or international... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Patent rights-management...

  13. 78 FR 31570 - Prospective Grant of a Start-Up Exclusive Patent License Agreement: Treatment of Graves' Disease...

    Science.gov (United States)

    2013-05-24

    ...-Up Exclusive Patent License Agreement: Treatment of Graves' Disease, Hyperthyroidism and Thyroid... Patent License Agreement may be worldwide and the field of use may be limited to: Treatment of Graves' Disease, hyperthyroidism and thyroid cancer. DATES: Only written comments or applications for a license...

  14. 76 FR 43631 - Revision of the Materiality to Patentability Standard for the Duty To Disclose Information in...

    Science.gov (United States)

    2011-07-21

    ... 0651-AC58 Revision of the Materiality to Patentability Standard for the Duty To Disclose Information in... revise the standard for materiality for the duty to disclose information in patent applications and... revise the materiality standard for the duty to disclose to match the materiality standard, as defined in...

  15. Interactive overlay maps for US Patent (USPTO) data based on International Patent Classifications (IPC)

    NARCIS (Netherlands)

    Leydesdorff, L.; Kushnir, D.; Rafols, I.

    2014-01-01

    We report on the development of an interface to the US Patent and Trademark Office (USPTO) that allows for the mapping of patent portfolios as overlays to basemaps constructed from citation relations among all patents contained in this database during the period 1976-2011. Both the interface and the

  16. Using Patent Classification to Discover Chemical Information in a Free Patent Database: Challenges and Opportunities

    Science.gov (United States)

    Ha¨rtinger, Stefan; Clarke, Nigel

    2016-01-01

    Developing skills for searching the patent literature is an essential element of chemical information literacy programs at the university level. The present article creates awareness of patents as a rich source of chemical information. Patent classification is introduced as a key-component in comprehensive search strategies. The free Espacenet…

  17. 78 FR 51177 - Notice of Intent To Grant Partially Exclusive Patent License; ICAP Patent Brokerage, LLC

    Science.gov (United States)

    2013-08-20

    ... DEPARTMENT OF DEFENSE Department of the Navy Notice of Intent To Grant Partially Exclusive Patent License; ICAP Patent Brokerage, LLC AGENCY: Department of the Navy, DoD. ACTION: Notice. SUMMARY: The Department of the Navy hereby gives notice of its intent to grant to ICAP Patent Brokerage, LLC, a revocable...

  18. 78 FR 72872 - Notice of Intent To Grant Partially Exclusive Patent License; ICAP Patent Brokerage, LLC

    Science.gov (United States)

    2013-12-04

    ... DEPARTMENT OF DEFENSE Department of the Navy Notice of Intent To Grant Partially Exclusive Patent License; ICAP Patent Brokerage, LLC AGENCY: Department of the Navy, DoD. ACTION: Notice. SUMMARY: The Department of the Navy hereby gives notice of its intent to grant to ICAP Patent Brokerage, LLC, a revocable...

  19. The selection of adhesive systems for resin-based luting agents.

    Science.gov (United States)

    Carville, Rebecca; Quinn, Frank

    2008-01-01

    The use of resin-based luting agents is ever expanding with the development of adhesive dentistry. A multitude of different adhesive systems are used with resin-based luting agents, and new products are introduced to the market frequently. Traditional adhesives generally required a multiple step bonding procedure prior to cementing with active resin-based luting materials; however, combined agents offer a simple application procedure. Self-etching 'all-in-one' systems claim that there is no need for the use of a separate adhesive process. The following review addresses the advantages and disadvantages of the available adhesive systems used with resin-based luting agents.

  20. Cork-resin ablative insulation for complex surfaces and method for applying the same

    Science.gov (United States)

    Walker, H. M.; Sharpe, M. H.; Simpson, W. G. (Inventor)

    1980-01-01

    A method of applying cork-resin ablative insulation material to complex curved surfaces is disclosed. The material is prepared by mixing finely divided cork with a B-stage curable thermosetting resin, forming the resulting mixture into a block, B-stage curing the resin-containing block, and slicing the block into sheets. The B-stage cured sheet is shaped to conform to the surface being insulated, and further curing is then performed. Curing of the resins only to B-stage before shaping enables application of sheet material to complex curved surfaces and avoids limitations and disadvantages presented in handling of fully cured sheet material.