WorldWideScience

Sample records for resinosa infusions encapsulated

  1. Effect of high-pressure homogenization on the physical and antioxidant properties of Quercus resinosa infusions encapsulated by spray-drying.

    Science.gov (United States)

    Rocha-Guzmán, Nuria Elizabeth; Gallegos-Infante, José Alberto; González-Laredo, Rubén Francisco; Harte, Federico; Medina-Torres, Luis; Ochoa-Martínez, Luz Araceli; Soto-García, Marcela

    2010-06-01

    Quercus resinosa leaves are used in northern Mexico as a refreshing beverage rich in polyphenolic compounds. These leaves show astringency and hence need taste masking for incorporating in a food product. They also interact with many other food components and are not very stable to food processing environments, thus it is important to protect them and a common way is by encapsulation. In the present study the use of encapsulation by spray-drying of Quercus resinosa leaves infusions was evaluated. Q. resinosa leaves were collected, air dried, and milled prior to infusion preparation. Lactose-sodium caseinate blends at 3 different proportions (11 : 4%, 9 : 6%, and 7 : 8%) were dispersed with a constant amount of lyophilized infusion (0.075%) and processed under high-pressure homogenization (0, 100, 200, 300 MPa). Total phenolic content, DPPH kinetic analysis, deoxy-D-ribose oxidation inhibition, rheological evaluation, and particle size analysis were performed to evaluate the obtained capsules. High antioxidant activity was shown by capsules despite their very low concentration when inhibiting deoxy-D-ribose oxidation. Chain breaking rate was related to polyphenolic concentration in capsules. Using lactose-caseinate blends produces capsules of submicron to nanometer size that retain the good antioxidant capacities of original infusions.

  2. Direct intratumoral infusion of liposome encapsulated rhenium radionuclides for cancer therapy: Effects of nonuniform intratumoral dose distribution

    International Nuclear Information System (INIS)

    Hrycushko, Brian A.; Li Shihong; Goins, Beth; Otto, Randal A.; Bao, Ande

    2011-01-01

    Purpose: Focused radiation therapy by direct intratumoral infusion of lipid nanoparticle (liposome)-carried beta-emitting radionuclides has shown promising results in animal model studies; however, little is known about the impact the intratumoral liposomal radionuclide distribution may have on tumor control. The primary objective of this work was to investigate the effects the intratumoral absorbed dose distributions from this cancer therapy modality have on tumor control and treatment planning by combining dosimetric and radiobiological modeling with in vivo imaging data. Methods: 99m Tc-encapsulated liposomes were intratumorally infused with a single injection location to human head and neck squamous cell carcinoma xenografts in nude rats. High resolution in vivo planar imaging was performed at various time points for quantifying intratumoral retention following infusion. The intratumoral liposomal radioactivity distribution was obtained from 1 mm resolution pinhole collimator SPECT imaging coregistered with CT imaging of excised tumors at 20 h postinfusion. Coregistered images were used for intratumoral dosimetric and radiobiological modeling at a voxel level following extrapolation to the therapeutic analogs, 186 Re/ 188 Re liposomes. Effective uniform dose (EUD) and tumor control probability (TCP) were used to assess therapy effectiveness and possible methods of improving upon tumor control with this radiation therapy modality. Results: Dosimetric analysis showed that average tumor absorbed doses of 8.6 Gy/MBq (318.2 Gy/mCi) and 5.7 Gy/MBq (209.1 Gy/mCi) could be delivered with this protocol of radiation delivery for 186 Re/ 188 Re liposomes, respectively, and 37-92 MBq (1-2.5 mCi)/g tumor administered activity; however, large intratumoral absorbed dose heterogeneity, as seen in dose-volume histograms, resulted in insignificant values of EUD and TCP for achieving tumor control. It is indicated that the use of liposomes encapsulating radionuclides with higher

  3. Coumarin and alkaloids of Rauia resinosa (Rutaceae)

    International Nuclear Information System (INIS)

    Albarici, Tatiane Regina; Vieira, Paulo Cezar; Fernandes, Joao Batista; Silva, Maria Fatima das Gracas Fernandes da; Pirani, Jose Rubens

    2010-01-01

    The genus Rauia, that is poorly chemically studied, belongs to the Rutaceae family. This family has been known to contain a large variety of secondary metabolites. Our phytochemical investigation of the stem and leaves of Rauia resinosa has led to the identification of the structurally related coumarins: murralongin (1), murrangatin (2), munomicrolin (3), murrangatin diacetate (4), umbelliferone (5), rauianin (6) and one novel coumarin: 3-ethylrauianin (7); the alkaloids: N-methyl-4-methoxy-2-quinolone (8), mirtopsine (9), dictamine (10), g-fagarine (11), skimmianine (12), Z-dimethylrhoifolinate (13), zantodioline (14), zantobungeanine (15), veprissine (16), one novel alkaloid 7-hydroxy-8-methoxy-N-methylflindersine (17) and 8-hydroxy-N-methylflindersine (18) that is described as a natural product for the first time, and a mixture of steroids: as sitosterol and stigmasterol. (author)

  4. Coumarin and alkaloids of Rauia resinosa (Rutaceae); Cumarinas e alcaloides de Rauia resinosa (Rutaceae)

    Energy Technology Data Exchange (ETDEWEB)

    Albarici, Tatiane Regina; Vieira, Paulo Cezar; Fernandes, Joao Batista; Silva, Maria Fatima das Gracas Fernandes da, E-mail: paulo@dq.ufscar.b [Universidade Federal de Sao Carlos (UFSCAR), SP (Brazil). Dept. de Quimica; Pirani, Jose Rubens [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Biociencias. Dept. de Botanica

    2010-07-01

    The genus Rauia, that is poorly chemically studied, belongs to the Rutaceae family. This family has been known to contain a large variety of secondary metabolites. Our phytochemical investigation of the stem and leaves of Rauia resinosa has led to the identification of the structurally related coumarins: murralongin (1), murrangatin (2), munomicrolin (3), murrangatin diacetate (4), umbelliferone (5), rauianin (6) and one novel coumarin: 3-ethylrauianin (7); the alkaloids: N-methyl-4-methoxy-2-quinolone (8), mirtopsine (9), dictamine (10), g-fagarine (11), skimmianine (12), Z-dimethylrhoifolinate (13), zantodioline (14), zantobungeanine (15), veprissine (16), one novel alkaloid 7-hydroxy-8-methoxy-N-methylflindersine (17) and 8-hydroxy-N-methylflindersine (18) that is described as a natural product for the first time, and a mixture of steroids: as sitosterol and stigmasterol. (author)

  5. Effect of plantation density on kraft pulp production from red pine (Pinus resinosa Ait.)

    Science.gov (United States)

    J.Y. Zhu; G.C. Myers

    2006-01-01

    Red pine (Pinus resinosa Ait.) butt logs from 38 year old research plots were used to study the effect of plantation stand density on kraft pulp production. Results indicate that plantation stand density can affect pulp yield, unrefined pulp mean fibre length, and the response of pulp fibre length to pulp refining. However, the effect of plantation stand density on...

  6. Effects of plantation density on wood density and anatomical properties of red pine (Pinus resinosa Ait.)

    Science.gov (United States)

    J. Y. Zhu; C. Tim Scott; Karen L. Scallon; Gary C. Myers

    2007-01-01

    This study demonstrated that average ring width (or average annual radial growth rate) is a reliable parameter to quantify the effects of tree plantation density (growth suppression) on wood density and tracheid anatomical properties. The average ring width successfully correlated wood density and tracheid anatomical properties of red pines (Pinus resinosa Ait.) from a...

  7. Infusion cisternography

    International Nuclear Information System (INIS)

    Magnaes, B.; Rootwelt, K.; Sjaastad, O.

    1976-01-01

    A source of error in cerebrospinal fluid (CSF) infusion tests is leakage at the dural puncture site. The addition of a bolus of radionuclide to the infusion fluid was helpful in detecting the existence of leakage as shown by increased infusion pressure in six of eight patients studied with and without scintigraphic evidence of leakage. Comparison of CSF dynamics in 26 patients studied by infusion cisternography and conventional cisternography showed similar patterns, suggesting no alteration of CSF dynamics by the artificial CSF infusion. Combining the two tests, therefore, resulted in simple identification of the leakage and saved the patient time and discomfort

  8. Os conceitos de eletricidade vítrea e eletricidade resinosa segundo Du Fay

    OpenAIRE

    Boss,Sérgio Luiz Bragatto; Caluzi,João José

    2007-01-01

    Na década de trinta do século XVIII, Charles François De Cisternay Du Fay enunciou dois princípios gerais que, segundo ele, regiam os fenômenos da eletricidade. O objetivo deste trabalho é discutir as propostas de Du Fay e sua interpretação posterior. Estruturamos o artigo em três partes. Inicialmente, faremos uma breve biografia de Du Fay para, em seguida, discutirmos sua proposta da eletricidade vítrea e eletricidade resinosa. Na terceira parte apresentamos a tradução de uma carta de Du Fay...

  9. Influence of repeated prescribed fire on tree growth and mortality in Pinus resinosa forests, northern Minnesota

    Science.gov (United States)

    Bottero, Alessandra; D'Amato, Anthony W.; Palik, Brian J.; Kern, Christel C.; Bradford, John B.; Scherer, Sawyer S.

    2017-01-01

    Prescribed fire is widely used for ecological restoration and fuel reduction in fire-dependent ecosystems, most of which are also prone to drought. Despite the importance of drought in fire-adapted forests, little is known about cumulative effects of repeated prescribed burning on tree growth and related response to drought. Using dendrochronological data in red pine (Pinus resinosa Ait.)-dominated forests in northern Minnesota, USA, we examined growth responses before and after understory prescribed fires between 1960 and 1970, to assess whether repeated burning influences growth responses of overstory trees and vulnerability of overstory tree growth to drought. We found no difference in tree-level growth vulnerability to drought, expressed as growth resistance, resilience, and recovery, between areas receiving prescribed fire treatments and untreated forests. Annual mortality rates during the period of active burning were also low (less than 2%) in all treatments. These findings indicate that prescribed fire can be effectively integrated into management plans and climate change adaptation strategies for red pine forest ecosystems without significant short- or long-term negative consequences for growth or mortality rates of overstory trees.

  10. Carbon stocks across a chronosequence of thinned and unmanaged red pine (Pinus resinosa) stands.

    Science.gov (United States)

    Powers, Matthew D; Kolka, Randall K; Bradford, John B; Palik, Brian J; Fraver, Shawn; Jurgensen, Martin F

    2012-06-01

    Forests function as a major global C sink, and forest management strategies that maximize C stocks offer one possible means of mitigating the impacts of increasing anthropogenic CO2 emissions. We studied the effects of thinning, a common management technique in many forest types, on age-related trends in C stocks using a chronosequence of thinned and unmanaged red pine (Pinus resinosa) stands ranging from 9 to 306 years old. Live tree C stocks increased with age to a maximum near the middle of the chronosequence in unmanaged stands, and increased across the entire chronosequence in thinned stands. C in live understory vegetation and C in the mineral soil each declined rapidly with age in young stands but changed relatively little in middle-aged to older stands regardless of management. Forest floor C stocks increased with age in unmanaged stands, but forest floor C decreased with age after the onset of thinning around age 40 in thinned stands. Deadwood C was highly variable, but decreased with age in thinned stands. Total ecosystem C increased with stand age until approaching an asymptote around age 150. The increase in total ecosystem C was paralleled by an age-related increase in total aboveground C, but relatively little change in total belowground C. Thinning had surprisingly little impact on total ecosystem C stocks, but it did modestly alter age-related trends in total ecosystem C allocation between aboveground and belowground pools. In addition to characterizing the subtle differences in C dynamics between thinned and unmanaged stands, these results suggest that C accrual in red pine stands continues well beyond the 60-100 year management rotations typical for this system. Management plans that incorporate longer rotations and thinning in some stands could play an important role in maximizing C stocks in red pine forests while meeting other objectives including timber extraction, biodiversity conservation, restoration, and fuel reduction goals.

  11. Carbon stocks across a chronosequence of thinned and unmanaged red pine (Pinus resinosa) stands

    Science.gov (United States)

    Powers, Matthew D.; Kolka, Randall K.; Bradford, John B.; Palik, Brian J.; Fraver, Shawn; Jurgensen, Martin F.

    2012-01-01

    Forests function as a major global C sink, and forest management strategies that maximize C stocks offer one possible means of mitigating the impacts of increasing anthropogenic CO2 emissions. We studied the effects of thinning, a common management technique in many forest types, on age-related trends in C stocks using a chronosequence of thinned and unmanaged red pine (Pinus resinosa) stands ranging from 9 to 306 years old. Live tree C stocks increased with age to a maximum near the middle of the chronosequence in unmanaged stands, and increased across the entire chronosequence in thinned stands. C in live understory vegetation and C in the mineral soil each declined rapidly with age in young stands but changed relatively little in middle-aged to older stands regardless of management. Forest floor C stocks increased with age in unmanaged stands, but forest floor C decreased with age after the onset of thinning around age 40 in thinned stands. Deadwood C was highly variable, but decreased with age in thinned stands. Total ecosystem C increased with stand age until approaching an asymptote around age 150. The increase in total ecosystem C was paralleled by an age-related increase in total aboveground C, but relatively little change in total belowground C. Thinning had surprisingly little impact on total ecosystem C stocks, but it did modestly alter age-related trends in total ecosystem C allocation between aboveground and belowground pools. In addition to characterizing the subtle differences in C dynamics between thinned and unmanaged stands, these results suggest that C accrual in red pine stands continues well beyond the 60–100 year management rotations typical for this system. Management plans that incorporate longer rotations and thinning in some stands could play an important role in maximizing C stocks in red pine forests while meeting other objectives including timber extraction, biodiversity conservation, restoration, and fuel reduction goals.

  12. Use of DNA sequencing to detect pathogenic, saprotrophic, and stain fungi in sapwood of declining red pine (Pinus resinosa) in the Upper Midwest

    Science.gov (United States)

    M.T. Banik; D.L. Lindner; J. Juzwik; J.A. Glaeser

    2013-01-01

    An inexpensive kit was developed to collect wood samples for molecular detection of pathogenic, saprotrophic and stain fungi in declining Pinus resinosa in the Upper Midwest. The kit contained materials for "clean" collection of sapwood drill shavings, which were then subjected to PCR of the rDNA ITS region with fungal-specific primers,...

  13. Seasonal variations in red pine (Pinus resinosa) and jack pine (Pinus banksiana) foliar physio-chemistry and their potential influence on stand-scale wildland fire behavior

    Science.gov (United States)

    Matt Jolly; John Hintz; Rodman L. Linn; Rachael C. Kropp; Elliot T. Conrad; Russell A. Parsons; Judith Winterkamp

    2016-01-01

    The 'Spring Dip' in conifer live foliar moisture content (LFMC) has been well documented but the actual drivers of these variations have not been fully investigated. Here we span this knowledge gap by measuring LFMC, foliar chemistry, foliar density and foliar flammability on new and old foliage for an entire year from both Pinus resinosa (red pine) and Pinus...

  14. Managing succession in conifer plantations: converting young red pine (Pinus resinosa Ait.) plantations to native forest types by thinning and underplantiing

    Science.gov (United States)

    William C. Parker; Ken A. Elliott; Daniel C. Dey; Eric Boysen; Steven G. Newmaster

    2001-01-01

    The effects of thinning on growth and survival of white pine (Pinus strobus L.), white ash (Fraxinus americana L.), and red oak (Quercus rubra L.), and understory plant diversity were examined in a young red pine (Pinus resinosa Ait.) plantation. Five years after thinning, seedling diameter,...

  15. Using ring width correlations to study the effects of plantation density on wood density and anatomical properties of red pine (Pinus resinosa Ait.)

    Science.gov (United States)

    J. Y. Zhu; C. T. Scott; K. L. Scallon; G. C. Myers

    2006-01-01

    This study demonstrated that average ring width (or average annual radial growth rate) is a reliable parameter to quantify the effects of tree plantation ndensity (growth suppression) on wood density and tracheid anatomical properties. The average ring width successfully correlated wood density and tracheid anatomical properties of red pines (Pinus resinosa Ait.) from...

  16. POLYETHYLENE ENCAPSULATION

    International Nuclear Information System (INIS)

    Kalb, P.

    2001-01-01

    Polyethylene microencapsulation physically homogenizes and incorporates mixed waste particles within a molten polymer matrix, forming a solidified final waste form upon cooling. Each individual particle of waste is embedded within the polymer block and is surrounded by a durable, leach-resistant coating. The process has been successfully applied for the treatment of a broad range of mixed wastes, including evaporator concentrate salts, soil, sludges, incinerator ash, off-gas blowdown solutions, decontamination solutions, molten salt oxidation process residuals, ion exchange resins, granular activated carbon, shredded dry active waste, spill clean-up residuals, depleted uranium powders, and failed grout waste forms. For waste streams containing high concentrations of soluble toxic metal contaminants, additives can be used to further reduce leachability, thus improving waste loadings while meeting or exceeding regulatory disposal criteria. In this configuration, contaminants are both chemically stabilized and physically solidified, making the process a true stabilization/solidification (S/S) technology. Unlike conventional hydraulic cement grouts or thermosetting polymers, thermoplastic polymers such as polyethylene require no chemical. reaction for solidification. Thus, a stable, solid, final waste form product is assured on cooling. Variations in waste chemistry over time do not affect processing parameters and do not require reformulation of the recipe. Incorporation of waste particles within the polymer matrix serves as an aggregate and improves the mechanical strength and integrity of the waste form. The compressive strength of polyethylene microencapsulated waste forms varies based on the type and quantity of waste encapsulated, but is typically between 7 and 17.2 MPa (1000 and 2500 psi), well above the minimum strength of 0.4 MPa (160 psi) recommended by the U.S. Nuclear Regulatory Commission (NRC) for low-level radioactive waste forms in support of 10 CFR 61

  17. Encapsulation of radioactive waste

    International Nuclear Information System (INIS)

    Pordes, O.; Plows, J.P.

    1980-01-01

    A method is described for encapsulating a particular radioactive waste which consists of suspending the waste in a viscous liquid encapsulating material, of synthetic resin monomers or prepolymers, and setting the encapsulating material by addition or condensation polymerization to form a solid material in which the waste is dispersed. (author)

  18. Encapsulation by Janus spheroids

    OpenAIRE

    Li, Wei; Liu, Ya; Brett, Genevieve; Gunton, James D.

    2011-01-01

    The micro/nano encapsulation technology has acquired considerable attention in the fields of drug delivery, biomaterial engineering, and materials science. Based on recent advances in chemical particle synthesis, we propose a primitive model of an encapsulation system produced by the self-assembly of Janus oblate spheroids, particles with oblate spheroidal bodies and two hemi-surfaces coded with dissimilar chemical properties. Using Monte Carlo simulation, we investigate the encapsulation sys...

  19. Encapsulation plant at Forsmark

    Energy Technology Data Exchange (ETDEWEB)

    Nystroem, Anders

    2007-08-15

    SKB has already carried out a preliminary study of an encapsulation plant detached from Clab (Central interim storage for spent fuels). This stand-alone encapsulation plant was named FRINK and its assumed siting was the above-ground portion of the final repository, irrespective of the repository's location. The report previously presented was produced in cooperation with BNFL Engineering Ltd in Manchester and the fuel reception technical solution was examined by Gesellschaft fuer Nuklear-Service mbH (GNS) in Hannover and by Societe Generale pour les Techniques Nouvelles (SGN) in Paris. This report is an update of the earlier preliminary study report and is based on the assumption that the encapsulation plant and also the final repository will be sited in the Forsmark area. SKB's main alternative for siting the encapsulation plant is next to Clab. Planning of this facility is ongoing and technical solutions from the planning work have been incorporated in this report. An encapsulation plant placed in proximity to any final repository in Forsmark forms part of the alternative presentation in the application for permission to construct and operate an installation at Clab. The main technical difference between the planned encapsulation plant at Clab and an encapsulation plant at a final repository at Forsmark is how the fuel is managed and prepared before actual encapsulation. Fuel reception at the encapsulation plant in Forsmark would be dry, i.e. there would be no water-filled pools at the facility. Clab is used for verificatory fuel measurements, sorting and drying of the fuel before transport to Forsmark. This means that Clab will require a measure of rebuilding and supplementary equipment. In purely technical terms, the prospects for building an encapsulation plant sited at Forsmark are good. A description of the advantages and drawbacks of siting the encapsulation plant at Clab as opposed to any final repository at Forsmark is presented in a separate

  20. Continuous-infusion adriamycin

    International Nuclear Information System (INIS)

    Benjamin, R.S.; Chawla, S.P.; Ewer, M.S.; Hortobagyi, G.N.

    1986-01-01

    This chapter discusses the diminished cardiotoxicity as well as diminished nausea and vomiting with continuous infusions of adriamycin to patients undergoing radiation therapy, particularly with infusions of 48 hours or longer, and best with 96-hour infusions, the longest duration that has been studied systematically. In breast cancer, data show that more adriamycin is better, but only for a selected subgroup of patients: those with complete remission. The diminished cardiotoxicity makes the use of adriamycin more attractive in the adjuvant situation, where increased safety will decrease the chances of long-term complications and make retreatment easy for cured patients who develop second malignancies

  1. Review of encapsulation technologies

    International Nuclear Information System (INIS)

    Shaulis, L.

    1996-09-01

    The use of encapsulation technology to produce a compliant waste form is an outgrowth from existing polymer industry technology and applications. During the past 12 years, the Department of Energy (DOE) has been researching the use of this technology to treat mixed wastes (i.e., containing hazardous and radioactive wastes). The two primary encapsulation techniques are microencapsulation and macroencapsulation. Microencapsulation is the thorough mixing of a binding agent with a powdered waste, such as incinerator ash. Macroencapsulation coats the surface of bulk wastes, such as lead debris. Cement, modified cement, and polyethylene are the binding agents which have been researched the most. Cement and modified cement have been the most commonly used binding agents to date. However, recent research conducted by DOE laboratories have shown that polyethylene is more durable and cost effective than cements. The compressive strength, leachability, resistance to chemical degradation, etc., of polyethylene is significantly greater than that of cement and modified cement. Because higher waste loads can be used with polyethylene encapsulant, the total cost of polyethylene encapsulation is significantly less costly than cement treatment. The only research lacking in the assessment of polyethylene encapsulation treatment for mixed wastes is pilot and full-scale testing with actual waste materials. To date, only simulated wastes have been tested. The Rocky Flats Environmental Technology Site had planned to conduct pilot studies using actual wastes during 1996. This experiment should provide similar results to the previous tests that used simulated wastes. If this hypothesis is validated as anticipated, it will be clear that polyethylene encapsulation should be pursued by DOE to produce compliant waste forms

  2. Structure and development of old-growth, unmanaged second-growth, and extended rotation Pinus resinosa forests in Minnesota, USA

    Science.gov (United States)

    Silver, Emily J.; D'Amato, Anthony W.; Fraver, Shawn; Palik, Brian J.; Bradford, John B.

    2013-01-01

    The structure and developmental dynamics of old-growth forests often serve as important baselines for restoration prescriptions aimed at promoting more complex structural conditions in managed forest landscapes. Nonetheless, long-term information on natural patterns of development is rare for many commercially important and ecologically widespread forest types. Moreover, the effectiveness of approaches recommended for restoring old-growth structural conditions to managed forests, such as the application of extended rotation forestry, has been little studied. This study uses several long-term datasets from old growth, extended rotation, and unmanaged second growth Pinus resinosa (red pine) forests in northern Minnesota, USA, to quantify the range of variation in structural conditions for this forest type and to evaluate the effectiveness of extended rotation forestry at promoting the development of late-successional structural conditions. Long-term tree population data from permanent plots for one of the old-growth stands and the extended rotation stands (87 and 61 years, respectively) also allowed for an examination of the long-term structural dynamics of these systems. Old-growth forests were more structurally complex than unmanaged second-growth and extended rotation red pine stands, due in large part to the significantly higher volumes of coarse woody debris (70.7 vs. 11.5 and 4.7 m3/ha, respectively) and higher snag basal area (6.9 vs. 2.9 and 0.5 m2/ha, respectively). In addition, old-growth forests, although red pine-dominated, contained a greater abundance of other species, including Pinus strobus, Abies balsamea, and Picea glauca relative to the other stand types examined. These differences between stand types largely reflect historic gap-scale disturbances within the old-growth systems and their corresponding structural and compositional legacies. Nonetheless, extended rotation thinning treatments, by accelerating advancement to larger tree diameter

  3. Continuous radioisotope infusion

    International Nuclear Information System (INIS)

    Soederborg, B.; Asaba, H.; Gunnarsson, B.; Jekell, K.; Kiibus, A.; Sandqvist, S.

    1978-01-01

    Continuous infusion of a radioactive marker was used instead of a conventional bolus injection to improve haemodynamic studies. Tc-99m was infused into the blood circulation at a constant rate for 100-300 seconds and the activity in the target structure was measured by a gamma camera with a computer system or by a single detector. The concentration of the marker increased linearly at the same rate throughout the circulating system. Due to variations in transport time from infusion site to different parts of the system the rise of activity occurred at different times. A theory for the calculations was presented and consequently confirmed in a model study. Blood flow patterns in artificial kidneys and alterations in renal blood flow induced by angiotensin were studied. The results are presented as time-function curves or as computer images. This technique can be used to evaluate distributions and alterations of flow in separate parts of a complex circulating system. (author)

  4. Transport of encapsulated nuclear fuels

    International Nuclear Information System (INIS)

    Broman, Ulrika; Dybeck, Peter; Ekendahl, Ann-Mari

    2005-12-01

    The transport system for encapsulated fuel is described, including a preliminary drawing of a transport container. In the report, the encapsulation plant is assumed to be located to Oskarshamn, and the repository to Oskarshamn or Forsmark

  5. Subcutaneous encapsulated fat necrosis

    DEFF Research Database (Denmark)

    Aydin, Dogu; Berg, Jais O

    2016-01-01

    We have described subcutaneous encapsulated fat necrosis, which is benign, usually asymptomatic and underreported. Images have only been published on two earlier occasions, in which the necrotic nodules appear "pearly" than the cloudy yellow surface in present case. The presented image may help f...

  6. Encapsulation Efficiency, Oscillatory Rheometry

    Directory of Open Access Journals (Sweden)

    Z. Mohammad Hassani

    2014-01-01

    Full Text Available Nanoliposomes are one of the most important polar lipid-based nanocarriers which can be used for encapsulation of both hydrophilic and hydrophobic active compounds. In this research, nanoliposomes based on lecithin-polyethylene glycol-gamma oryzanol were prepared by using a modified thermal method. Only one melting peak in DSC curve of gamma oryzanol bearing liposomes was observed which could be attributed to co-crystallization of both compounds. The addition of gamma oryzanol, caused to reduce the melting point of 5% (w/v lecithin-based liposome from 207°C to 163.2°C. At high level of lecithin, increasing of liposome particle size (storage at 4°C for two months was more obvious and particle size increased from 61 and 113 to 283 and 384 nanometers, respectively. The encapsulation efficiency of gamma oryzanol increased from 60% to 84.3% with increasing lecithin content. The encapsulation stability of oryzanol in liposome was determined at different concentrations of lecithin 3, 5, 10, 20% (w/v and different storage times (1, 7, 30 and 60 days. In all concentrations, the encapsulation stability slightly decreased during 30 days storage. The scanning electron microscopy (SEM images showed relatively spherical to elliptic particles which indicated to low extent of particles coalescence. The oscillatory rheometry showed that the loss modulus of liposomes were higher than storage modulus and more liquid-like behavior than solid-like behavior. The samples storage at 25°C for one month, showed higher viscoelastic parameters than those having been stored at 4°C which were attributed to higher membrane fluidity at 25°C and their final coalescence.Nanoliposomes are one of the most important polar lipid based nanocarriers which can be used for encapsulation of both hydrophilic and hydrophobic active compounds. In this research, nanoliposomes based on lecithin-polyethylene glycol-gamma oryzanol were prepared by using modified thermal method. Only one

  7. Encapsulating spent nuclear fuel

    International Nuclear Information System (INIS)

    Fleischer, L.R.; Gunasekaran, M.

    1979-01-01

    A system is described for encapsulating spent nuclear fuel discharged from nuclear reactors in the form of rods or multi-rod assemblies. The rods are completely and contiguously enclosed in concrete in which metallic fibres are incorporated to increase thermal conductivity and polymers to decrease fluid permeability. This technique provides the advantage of acceptable long-term stability for storage over the conventional underwater storage method. Examples are given of suitable concrete compositions. (UK)

  8. Encapsulation of a model compound in pectin delays its release from a biobased polymeric material

    Science.gov (United States)

    A model compound was encapsulated in pectin and then extruded with thermoplastic starch to form a composite. The intended product was a food-contact tray made of biobased polymers infused with an anti-microbial agent; however, caffeine was used as the model compound in the preliminary work. The mode...

  9. Intravenous lidocaine infusion.

    Science.gov (United States)

    Soto, G; Naranjo González, M; Calero, F

    2018-02-26

    Systemic lidocaine used in continuous infusion during the peri-operative period has analgesic, anti-hyperalgesic, as well as anti-inflammatory properties. This makes it capable of reducing the use of opioids and inhalational anaesthetics, and the early return of bowel function, and patient hospital stay. The aim of this narrative review was to highlight the pharmacology and indications for clinical application, along with new and interesting research areas. The clinical applications of peri-operative lidocaine infusion have been reviewed in several recent systematic reviews and meta-analyses in patients undergoing open and laparoscopic abdominal procedures, ambulatory procedures, and other types of surgery. Peri-operative lidocaine infusion may be a useful analgesic adjunct in enhanced recovery protocols. Potential benefits of intravenous lidocaine in chronic post-surgical pain, post-operative cognitive dysfunction, and cancer recurrence are under investigation. Due to its immunomodulation properties over surgical stress, current evidence suggests that intravenous lidocaine could be used in the context of multimodal analgesia. Copyright © 2018 Sociedad Española de Anestesiología, Reanimación y Terapéutica del Dolor. Publicado por Elsevier España, S.L.U. All rights reserved.

  10. Swedish encapsulation station review

    International Nuclear Information System (INIS)

    Andersson, Sven Olof; Brunzell, P.; Heibel, R.; McCarthy, J.; Pennington, C.; Rusch, C.; Varley, G.

    1998-06-01

    In the Encapsulation Station (ES) Review performed by NAC International, a number of different areas have been studied. The main objectives with the review have been to: Perform an independent review of the cost estimates for the ES presented in SKB's document 'Plan 1996'. This has been made through comparisons between the ES and BNFL's Waste Encapsulation Plant (WEP) at Sellafield as well as with the CLAB facility. Review the location of the ES (at the CLAB site or at the final repository) and its interaction with other parts of the Swedish system for spent fuel management. Review the logistics and plant capacity of the ES. Identify important safety aspects of the ES as a basis for future licensing activities. Based on NAC International's experience of casks for transport and storage of spent fuel, review the basic design of the copper/steel canister and the transport cask. This review insides design, manufacturing, handling and licensing aspects. Perform an overall comparison between the ES project and the CLAB project with the objective to identify major project risks and discuss their mitigation

  11. Swedish encapsulation station review

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Sven Olof; Brunzell, P.; Heibel, R.; McCarthy, J.; Pennington, C.; Rusch, C.; Varley, G. [NAC International, Zuerich (Switzerland)

    1998-06-01

    In the Encapsulation Station (ES) Review performed by NAC International, a number of different areas have been studied. The main objectives with the review have been to: Perform an independent review of the cost estimates for the ES presented in SKB`s document `Plan 1996`. This has been made through comparisons between the ES and BNFL`s Waste Encapsulation Plant (WEP) at Sellafield as well as with the CLAB facility. Review the location of the ES (at the CLAB site or at the final repository) and its interaction with other parts of the Swedish system for spent fuel management. Review the logistics and plant capacity of the ES. Identify important safety aspects of the ES as a basis for future licensing activities. Based on NAC International`s experience of casks for transport and storage of spent fuel, review the basic design of the copper/steel canister and the transport cask. This review insides design, manufacturing, handling and licensing aspects. Perform an overall comparison between the ES project and the CLAB project with the objective to identify major project risks and discuss their mitigation 19 refs, 9 figs, 35 tabs

  12. Micro-Encapsulation of Probiotics

    Science.gov (United States)

    Meiners, Jean-Antoine

    Micro-encapsulation is defined as the technology for packaging with the help of protective membranes particles of finely ground solids, droplets of liquids or gaseous materials in small capsules that release their contents at controlled rates over prolonged periods of time under the influences of specific conditions (Boh, 2007). The material encapsulating the core is referred to as coating or shell.

  13. Encapsulated scintillation detector

    International Nuclear Information System (INIS)

    Toepke, I.L.

    1982-01-01

    A scintillation detector crystal is encapsulated in a hermetically sealed housing having a glass window. The window may be mounted in a ring by a compression seal formed during cooling of the ring and window after heating. The window may be chemically bonded to the ring with or without a compression seal. The ring is welded to the housing along thin weld flanges to reduce the amount of weld heat which must be applied. A thin section is provided to resist the flow of welding heat to the seal between the ring and the window thereby forming a thermal barrier. The thin section may be provided by a groove cut partially through the wall of the ring. A layer of PTFE between the tubular body and the crystal minimizes friction created by thermal expansion. Spring washers urge the crystal towards the window. (author)

  14. Palisaded encapsulated neuroma

    Directory of Open Access Journals (Sweden)

    Adesh S Manchanda

    2015-01-01

    Full Text Available Palisaded encapsulated neuroma (PEN is a benign cutaneous or mucosal neural tumor which, usually, presents as a solitary, firm, asymptomatic, papule or nodule showing striking predilection for the face. It occurs commonly in middle age, and there is no sex predilection. Oral PEN are not common, and these lesions must be distinguished from other peripheral nerve sheath tumors such as the neurofibroma, neurilemma (schwannoma, and traumatic neuroma. The major challenge in dealing with lesions of PEN is to avoid the misdiagnosis of neural tumors that may be associated with systemic syndromes such as neurofibromatosis and multiple endocrine neoplasia syndrome type 2B. Here, we present a case of benign PEN of the gingiva in the left anterior mandibular region, laying importance on immunohistochemical staining in diagnosing such lesions.

  15. Infusion's greenfield subsidiary in Poland

    NARCIS (Netherlands)

    Williams, C.; van Eerde, W.; The, D.

    2012-01-01

    The president of Infusion Development Corporation was reviewing the progress of the new subsidiary the company had set up 15 months earlier in Krakow, Poland. The purpose of the subsidiary was to work with other Infusion offices around the world to provide innovative software development services to

  16. OSR encapsulation basis -- 100-KW

    International Nuclear Information System (INIS)

    Meichle, R.H.

    1995-01-01

    The purpose of this report is to provide the basis for a change in the Operations Safety Requirement (OSR) encapsulated fuel storage requirements in the 105 KW fuel storage basin which will permit the handling and storing of encapsulated fuel in canisters which no longer have a water-free space in the top of the canister. The scope of this report is limited to providing the change from the perspective of the safety envelope (bases) of the Safety Analysis Report (SAR) and Operations Safety Requirements (OSR). It does not change the encapsulation process itself

  17. Sclerosing Encapsulating Peritonitis; Review

    Directory of Open Access Journals (Sweden)

    Norman O. Machado

    2016-05-01

    Full Text Available Sclerosing encapsulating peritonitis (SEP is a rare chronic inflammatory condition of the peritoneum with an unknown aetiology. Also known as abdominal cocoon, the condition occurs when loops of the bowel are encased within the peritoneal cavity by a membrane, leading to intestinal obstruction. Due to its rarity and nonspecific clinical features, it is often misdiagnosed. The condition presents with recurrent episodes of small bowel obstruction and can be idiopathic or secondary; the latter is associated with predisposing factors such as peritoneal dialysis or abdominal tuberculosis. In the early stages, patients can be managed conservatively; however, surgical intervention is necessary for those with advanced stage intestinal obstruction. A literature review revealed 118 cases of SEP; the mean age of these patients was 39 years and 68.0% were male. The predominant presentation was abdominal pain (72.0%, distension (44.9% or a mass (30.5%. Almost all of the patients underwent surgical excision (99.2% without postoperative complications (88.1%.

  18. Encapsulated subdural empyema

    International Nuclear Information System (INIS)

    Tokunaga, Yoshiharu; Inoue, Masaru; Ishizaka, Hiroaki; Koga, Hiroaki; Kawano, Teruaki; Mori, Kazuo

    1985-01-01

    A case of encapsulated subdural empyema was reported. This 1.5-year-old boy was admitted with the increasing confusion and convulsion. Eight months prior to admission, he had craniotomy for traumatic acute epidural hematoma on the left side. Following a coagulation of the middle meningeal artery which was the bleeding source, the dura was opened but no cortical damage was noted at that time. The computed tomographic (CT) scan on admission revealed a large subdural collection with a thin enhancing rim on the left side. Emergency craniotomy revealed a collection of subdural pus, which was irrigated and a catheter was put for continuous drainage. Postoperatively, the patient did well, however, following removal of the catheter, three weeks after the first operation, the subdural empyema was reexpanded with a very thick enhancing rim on CT scan. Ultrasonography also clearly demonstrated the formation of the thick membranes. The large craniotomy was performed and empyema with the outer and inner memberanes of 8mm thick was totally excised. Post-operative CT scan did not show any enhancing rim, indicating that enchancement was caused by newly formed vessels within the membranes per se. This findings are totally different from those observed in the brain abscess in which ring enhancement on CT continues months to years following so-called extracapsular excision of abscess. In the brain abscess, surrounding glial tissue with plenty neovascularization is left intact, even after the operation. (author)

  19. Encapsulation process for diffraction gratings.

    Science.gov (United States)

    Ratzsch, Stephan; Kley, Ernst-Bernhard; Tünnermann, Andreas; Szeghalmi, Adriana

    2015-07-13

    Encapsulation of grating structures facilitates an improvement of the optical functionality and/or adds mechanical stability to the fragile structure. Here, we introduce novel encapsulation process of nanoscale patterns based on atomic layer deposition and micro structuring. The overall size of the encapsulated structured surface area is only restricted by the size of the available microstructuring and coating devices; thus, overcoming inherent limitations of existing bonding processes concerning cleanliness, roughness, and curvature of the components. Finally, the process is demonstrated for a transmission grating. The encapsulated grating has 97.5% transmission efficiency in the -1st diffraction order for TM-polarized light, and is being limited by the experimental grating parameters as confirmed by rigorous coupled wave analysis.

  20. Encapsulated microsensors for reservoir interrogation

    Energy Technology Data Exchange (ETDEWEB)

    Scott, Eddie Elmer; Aines, Roger D.; Spadaccini, Christopher M.

    2016-03-08

    In one general embodiment, a system includes at least one microsensor configured to detect one or more conditions of a fluidic medium of a reservoir; and a receptacle, wherein the receptacle encapsulates the at least one microsensor. In another general embodiment, a method include injecting the encapsulated at least one microsensor as recited above into a fluidic medium of a reservoir; and detecting one or more conditions of the fluidic medium of the reservoir.

  1. Hypoglycaemia secondary to labetalol infusion.

    Science.gov (United States)

    Immanni, Sudhir; Khan, Ehtesham Izhar; Staunton, Michael

    2011-05-01

    A 42-year-old multigravida with severe pre-eclampsia had an emergency caesarean section under spinal anaesthesia. Peri-operatively, her arterial pressure was controlled with oral methyldopa and an intravenous infusion of labetalol. Postoperatively, in the Intensive Care Unit, she had recurrent episodes of hypoglycaemia which required treatment with intravenous glucose. These episodes resolved when the labetalol infusion was stopped. Clinicians should be aware of the potential of labetalol to cause hypoglycaemia.

  2. Encapsulation of polymer photovoltaic prototypes

    DEFF Research Database (Denmark)

    Krebs, Frederik C

    2006-01-01

    A simple and efficient method for the encapsulation of polymer and organic photovoltaic prototypes is presented. The method employs device preparation on glass substrates with subsequent sealing using glass fiber reinforced thermosetting epoxy (prepreg) against a back plate. The method allows...

  3. Encapsulated Curcumin for Transdermal Administration

    African Journals Online (AJOL)

    Purpose: To develop a proniosomal carrier system of curcumin for transdermal delivery. Methods: Proniosomes of curcumin were prepared by encapsulation of the drug in a mixture of Span 80, cholesterol and diethyl ether by ether injection method, and then investigated as a transdermal drug delivery system (TDDS).

  4. Device for encapsulating radioactive materials

    International Nuclear Information System (INIS)

    Suthanthiran, K.

    1994-01-01

    A capsule for encapsulating radioactive material for radiation treatment comprising two or more interfitting sleeves, wherein each sleeve comprises a closed bottom portion having a circumferential wall extending therefrom, and an open end located opposite the bottom portion. The sleeves are constructed to fit over one another to thereby establish an effectively sealed capsule container. 3 figs

  5. Reactants encapsulation and Maillard Reaction

    NARCIS (Netherlands)

    Troise, A.D.; Fogliano, V.

    2013-01-01

    In the last decades many efforts have been addressed to the control of Maillard Reaction products in different foods with the aim to promote the formation of compounds having the desired color and flavor and to reduce the concentration of several potential toxic molecules. Encapsulation, already

  6. Technology of mammalian cell encapsulation

    NARCIS (Netherlands)

    Uludag, H; De Vos, P; Tresco, PA

    2000-01-01

    Entrapment of mammalian cells in physical membranes has been practiced since the early 1950s when it was originally introduced as a basic research tool. The method has since been developed based on the promise of its therapeutic usefulness in tissue transplantation. Encapsulation physically isolates

  7. Infusion of radionuclides throughout pregnancy

    International Nuclear Information System (INIS)

    Mountford-Lister, P.G.; Lambert, B.E.; Milner, A.C.; Kang, X.Z.

    1992-01-01

    This work is part of a long-term study to examine the cancer incidence in the offspring of mice exposed to 239 Pu or 147 Pm throughout pregnancy. The need to model the human intake scenario and the possibility of a critical period during uterine development necessitates constant availability of radionuclides throughout pregnancy. Various methods (multiple daily injections, infusion by external cannula and infusion by indwelling osmotic pump) have been examined and osmotic infusion pumps chosen. These pumps result in a near-constant blood concentration for up to 21 days. Part of the study is the estimation of dose to the critical haemopoietic tissues of the pup from a knowledge of the radionuclide distribution and kinetics. At present the distribution has been followed from birth to 180 days. Activity in the suckling pups at 7 days old is around 1 percent of the infused activity, though most of this is accounted for by the contents of the stomach and gastrointestinal tract. The liver and femur account for around 0.025 percent and 0.012 percent respectively per pup. Activity increases in both liver and femur during lactation after which both concentration and activity fall with time. Long-term studies with the pups of dams exposed to a range of 239 Pu concentrations between 0-70 kBq/kg are underway. Correlation of average organ dose with tumour incidence will be determined at completion of the life-span study. (Author) 39 refs., 5 tabs., 6 figs

  8. Attenuation of dermal toxicity of doxorubicin by liposome encapsulation.

    Science.gov (United States)

    Forssen, E A; Tökes, Z A

    1983-05-01

    The severe tissue damage which occurs when doxorubicin (Dxn) is extravasated during infusion has been attenuated by encapsulating the drug in anionic liposomes. Mice were injected intradermally with either 0.05 or 0.10 mg of Dxn in the free or liposome-entrapped form. At both dose levels, the animals receiving free drug developed dermal lesions at a higher frequency and of a greater severity than did those animals receiving Dxn-liposomes. Determination of tissue-associated fluorescence indicated that free Dxn was removed from the area of the dermal injection more rapidly than was the liposome-entrapped drug. The data suggest that the dermal toxicity of Dxn may be determined more by its mode of disposition than by the absolute amount of drug in tissue. Similar observation was made earlier for the Dxn-induced chronic cardiotoxicity.

  9. The possible nomenclature of encapsulated products.

    Science.gov (United States)

    Wani, Touseef Ahmed; Masoodi, Farooq Ahmad; Wani, Idrees Ahmed

    2017-11-01

    The field of encapsulation is being explored widely and new information is not uncommon. However, the basic principles remain the same. Highlighting the importance of the variables in encapsulated products could help improve them for different applications. A separate nomenclature for encapsulated products would not only highlight important variables for producing better encapsulated products but might be helpful from their marketing point-of-view. Nomenclature of encapsulated products has potential in the production, properties, applications, economy, etc. of the final product. It could also help the general public understand more about what they are purchasing, and choose between options claiming the same or similar properties. The nomenclature proposed here is based on four variables (size, wall material, active ingredients and techniques for developing the encapsulated product) employed in the preparation of encapsulated products for different applications. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. Encapsulant materials and associated devices

    Energy Technology Data Exchange (ETDEWEB)

    Kempe, Michael D [Littleton, CO; Thapa, Prem [Lima, OH

    2011-03-08

    Compositions suitable for use as encapsulants are described. The inventive compositions include a high molecular weight polymeric material, a curing agent, an inorganic compound, and a coupling agent. Optional elements include adhesion promoting agents, colorants, antioxidants, and UV absorbers. The compositions have desirable diffusivity properties, making them suitable for use in devices in which a substantial blocking of moisture ingress is desired, such as photovoltaic (PV) modules.

  11. Encapsulant materials and associated devices

    Energy Technology Data Exchange (ETDEWEB)

    Kempe, Michael D [Littleton, CO; Thapa, Prem [Lima, OH

    2012-05-22

    Compositions suitable for use as encapsulants are described. The inventive compositions include a high molecular weight polymeric material, a curing agent, an inorganic compound, and a coupling agent. Optional elements include adhesion promoting agents, colorants, antioxidants, and UV absorbers. The compositions have desirable diffusivity properties, making them suitable for use in devices in which a substantial blocking of moisture ingress is desired, such as photovoltaic (PV) modules.

  12. Zeolite encapsulation of H2

    International Nuclear Information System (INIS)

    Cooper, S.; Lakner, J.F.

    1982-08-01

    Experiments with H 2 have shown that it is possible to encapsulate gases in the structure of certain molecular sieves. This method may offer a better means of temporarily storing and disposing of tritium over some others presently in use. The method may also prove safer, and may enable isotope separation, and removal of 3 He. Initial experiments were performed with H 2 to screen potential candidates for use with tritium

  13. 21 CFR 880.5725 - Infusion pump.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Infusion pump. 880.5725 Section 880.5725 Food and... Infusion pump. (a) Identification. An infusion pump is a device used in a health care facility to pump fluids into a patient in a controlled manner. The device may use a piston pump, a roller pump, or a...

  14. Perspective of metal encapsulation of waste

    International Nuclear Information System (INIS)

    Jardine, L.J.; Steindler, M.J.

    1978-01-01

    A conceptual flow sheet is presented for encapsulating solid, stabilized calcine (e.g., supercalcine) in a solid lead alloy, using existing or developing technologies. Unresolved and potential problem areas of the flow sheet are outlined and suggestions are made as how metal encapsulation might be applied to other solid wastes from the fuel cycle. It is concluded that metal encapsulation is a technique applicable to many forms of solid wastes and is likely to meet future waste isolation criteria and regulations

  15. 85Kr storage by zeolite encapsulation

    International Nuclear Information System (INIS)

    Brown, R.A.; Hoza, M.; Knecht, D.A.

    1976-01-01

    The technology of 85 Kr storage by zeolite encapsulation is described. The prcess of encapsulation takes place at high temperatures and pressures, and involves the activated diffusion of krypton into zeolite cages. Experimental results for krypton encapsulation in various zeolites are reviewed and discussed. Activated diffusion parameters determined by measuring krypton leakage rates from zeolites at high temperatures and low pressures are used to estimate leakage rates of 85 Kr during long-term storage. The potential safety benefits are determined for krypton-85 storage by encapsulation in sodalite. Requirements for pilot-scale and process-scale development are discussed briefly

  16. Preliminary investigation of cryopreservation by encapsulation ...

    African Journals Online (AJOL)

    Protocorm-like bodies (PLBs) of Brassidium Shooting Star, a new commercial ornamental orchid hybrid, were cryopreserved by an encapsulation-dehydration technique. The effects of PLB size, various sucrose concentrations in preculture media and sodium alginate concentration for encapsulation were the main ...

  17. Limonene encapsulation in freeze dried gellan systems.

    Science.gov (United States)

    Evageliou, Vasiliki; Saliari, Dimitra

    2017-05-15

    The encapsulation of limonene in freeze-dried gellan systems was investigated. Surface and encapsulated limonene content was determined by measurement of the absorbance at 252nm. Gellan matrices were both gels and solutions. For a standard gellan concentration (0.5wt%) gelation was induced by potassium or calcium chloride. Furthermore, gellan solutions of varying concentrations (0.25-1wt%) were also studied. Limonene was added at two different concentrations (1 and 2mL/100g sample). Gellan gels encapsulated greater amounts of limonene than solutions. Among all gellan gels, the KCl gels had the greater encapsulated limonene content. However, when the concentration of limonene was doubled in these KCl gels, the encapsulated limonene decreased. The surface limonene content was significant, especially for gellan solutions. The experimental conditions and not the mechanical properties of the matrices were the dominant factor in the interpretation of the observed results. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. General-purpose infusion pumps.

    Science.gov (United States)

    1998-01-01

    General-purpose infusion pumps deliver liquid medications to patients through intravenous or epidural routes at specified flows. They are most often used in hospitals and alternative care settings (e.g., physician' offices, patients' homes) when liquid medications need to be administered with greater accuracy or at higher flows than can be provided through a manually adjusted gravity administration set. In this Update of our February 1997 Evaluation of infusion pumps (Health Devices 26[2]), we tested 3 additional pumps from 3 suppliers. We also rated and ranked them in comparison with the 16 units from the February 1997 study that are still being produced. With a few exceptions, we tested the new pumps against the same criteria and using the same test methods as those in the previous Evaluation. However, for this Update, the focus of our findings has broadened: although we continue to place strong emphasis on the pumps' protection against gravity free-flow, we also give significant weight to their overall safety, performance, and human factors design. As a result, our ratings and rankings scheme has changed, affecting the rankings of some of the previously evaluated units. Of the 19 currently available units that have been evaluated to date, we rated 13 units Acceptable, with 5 of those units ranked above the other 8. A further 5 units were rated Conditionally Acceptable; we consider them Acceptable if they are used with the available free-flow protection. And 1 unit had performance problems that caused us to rate it Unacceptable (this unit has been recalled by its supplier; see the inset on page 162). As always, we caution readers not to base selection and purchasing decisions on our conclusions alone, but on a thorough understanding of the issues behind those conclusions, which can be gained by reading this Evaluation in its entirety and carefully reviewing the February 1997 issue.

  19. The History of Target-Controlled Infusion

    NARCIS (Netherlands)

    Struys, Michel M. R. F.; De Smet, Tom; Glen, John (Iain) B.; Vereecke, Hugo E. M.; Absalom, Anthony R.; Schnider, Thomas W.

    Target-controlled infusion (TCI) is a technique of infusing IV drugs to achieve a user-defined predicted (target) drug concentration in a specific body compartment or tissue of interest. In this review, we describe the pharmacokinetic principles of TCI, the development of TCI systems, and technical

  20. The Infusion Approach to Teacher Development.

    Science.gov (United States)

    Kowalski, Ellen M.

    1995-01-01

    The underlying premise of infusion is that information about individuals with disabilities must be more systematically integrated throughout an entire curriculum. This article describes the infusion approach to teacher development, explaining three central premises, providing sample program applications for each premise, and discussing brain…

  1. Intravenous drugs infusion safety through smart pumps

    Directory of Open Access Journals (Sweden)

    C. Gómez-Baraza

    2014-07-01

    Full Text Available Objective: To analyze the role of smart infusion pumps in reducing errors related with the administration of intravenous medications. Method: Retrospective, observational study analyzing the implementation of a system with smart intravenous infusion pumps (Hospira MedNetTM and the role of the safety system for the detection of errors during the administration of drugs, sera, and blood. We included infusions administered at the day-care hospitals of hematology, oncology, rheumatology, and oncopediatrics. We analyzed adherence to the safety system, the number of programming errors detected, the commonly implicated drugs in these errors, and improvement actions. Results: During the study period, 120 smart pumps were implemented and data on 70,028 infusions were gathered. The rate of adherence to the safety program was 62.30% in hematology (6,887 infusions, 60,30% in oncology (28,127 infusions, 46,50% in rheumatology (1,950 infusions and 1.8% in oncopediatrics (139 infusions. 3,481 out of the established limits programming alerts were generated by the pumps: 2,716 of relative limit and 765 of absolute limit. En 807 infusions (2.17%, errors that could have had consequences for the patients could be prevented. These findings allowed implementing a series of strategies aimed at minimizing these errors in the future. Conclusions: The Hospira MedNetTM system detects deviations from the established protocols of intravenous infusion, preventing in this way potential adverse events for the patients. It also allows establishing correction measures and implementing the improvement strategies.

  2. Microencapsulation techniques, factors influencing encapsulation efficiency.

    Science.gov (United States)

    Jyothi, N Venkata Naga; Prasanna, P Muthu; Sakarkar, Suhas Narayan; Prabha, K Surya; Ramaiah, P Seetha; Srawan, G Y

    2010-05-01

    Microencapsulation is one of the quality preservation techniques of sensitive substances and a method for production of materials with new valuable properties. Microencapsulation is a process of enclosing micron-sized particles in a polymeric shell. There are different techniques available for the encapsulation of drug entities. The encapsulation efficiency of the microparticle or microsphere or microcapsule depends upon different factors like concentration of the polymer, solubility of polymer in solvent, rate of solvent removal, solubility of organic solvent in water, etc. The present article provides a literature review of different microencapsulation techniques and different factors influencing the encapsulation efficiency of the microencapsulation technique.

  3. Strontium-rubidium infusion pump with in-line dosimetry

    International Nuclear Information System (INIS)

    Barker, S.L.; Loberg, M.D.

    1986-01-01

    A strontium-rubidium infusion system is described which consists of: (a) means for generating rubidium 82 in a solution which can be infused into a patient; (b) means for infusing the solution into a patient; (c) means for measuring the radioactivity present in the solution as it is infused into the patient; and (d) means for controlling the means for infusing in response to the amount of radioactivity which has been infused into the patient

  4. Lipid encapsulated phenolic compounds by fluidization

    Science.gov (United States)

    Phenolic compounds exhibit antioxidant and antimicrobial activities with applications as functional food and feed additives. Ferulic acid, a phenolic compound present in grain crops and lignocellulose biomass, was encapsulated with saturated triglycerides using a laboratory fluidizer. Stability of t...

  5. Encapsulation process sterilizes and preserves surgical instruments

    Science.gov (United States)

    Montgomery, L. C.; Morelli, F. A.

    1964-01-01

    Ethylene oxide is blended with an organic polymer to form a sterile material for encapsulating surgical instruments. The material does not bond to metal and can be easily removed when the instruments are needed.

  6. The effect of glucagon on infusion cholangiography

    International Nuclear Information System (INIS)

    Evans, A.F.; Whitehouse, G.H.

    1979-01-01

    An assessment has been made of the effects of glucagon on biliary tract opacification during intravenous cholangiography. Two series of infusion cholangiograms were obtained at two investigating centres designated A and B. In series A, 41 patients had ioglycamide infusions at a rate of 0.2833 g min -1 over 1 h. In series B, 31 patients had ioglycamide infusions at a rate of 0.3886 g min -1 over 30 min. Radiographs were taken in both series immediately at the end of the infusion, 10 min later and 30 min after the infusion. Two mg of intravenous glucagon was injected into alternate cases in both series A and B immediately after the first radiograph was taken at the completion of the ioglycamide infusion. Two observers in each series then assessed the radiographic opacification of the biliary system without prior knowledge of which patients had received the glucagon. Delineation of the biliary system was considered better in both series in those patients who received glucagon when compared with the controls. Gallbladder opacification was definitely increased in series A in those receiving glucagon, and a similar tendency was shown in series B. The amount of contrast in the upper intestine was increased in series A in the glucagon group, but not in series B. It is concluded that glucagon improves visualisation of the biliary tract, especially the gallbladder at infusion cholangiography. (author)

  7. Pharmacokinetics and toxicology of continuously infused nitroimidazoles

    International Nuclear Information System (INIS)

    Eifel, P.J.; Brown, J.M.

    1984-01-01

    The pharmacokinetics and toxicology of misonidazole (MISO) and SR-2508 given by continuous intraperitoneal infusion were studied in female C 3 H mice. The survival (time to death) of animals receiving continuous infusions of SR-2508 and MISO was compared and related to plasma concentration, rate of infusion and total amount of drug delivered. Brain and plasma concentrations were determined by HPLC. For SR-2508, plasma concentration was directly proportional to the infusion rate. However, as the infusion rate of MISO was doubled, the plasma concentration of MISO increased approximately 6-fold, reflecting a substantial increase in the apparent half-life. The brain/plasma concentration ratio in animals infused for up to 6 days with SR-2508 remained constant, at approximately 0.09. At plasma concentrations of 0.08-1.5 mM, animals receiving SR-2508 survived approximately 3 times as long as animals exposed to a comparable plasma concentration of MISO. Even at the lowest infusion rates employed in this study, the survival of mice receiving SR-2508 was much shorter than would have been predicted if the toxicity of these two drugs were solely related to the integral brain exposure. The low brain/plasma concentration ratio of SR-2508 was maintained throughout long continuous exposures

  8. Infliximab-Related Infusion Reactions: Systematic Review

    Science.gov (United States)

    Ron, Yulia; Kivity, Shmuel; Ben-Horin, Shomron; Israeli, Eran; Fraser, Gerald M.; Dotan, Iris; Chowers, Yehuda; Confino-Cohen, Ronit; Weiss, Batia

    2015-01-01

    Objective: Administration of infliximab is associated with a well-recognised risk of infusion reactions. Lack of a mechanism-based rationale for their prevention, and absence of adequate and well-controlled studies, has led to the use of diverse empirical administration protocols. The aim of this study is to perform a systematic review of the evidence behind the strategies for preventing infusion reactions to infliximab, and for controlling the reactions once they occur. Methods: We conducted extensive search of electronic databases of MEDLINE [PubMed] for reports that communicate various aspects of infusion reactions to infliximab in IBD patients. Results: We examined full texts of 105 potentially eligible articles. No randomised controlled trials that pre-defined infusion reaction as a primary outcome were found. Three RCTs evaluated infusion reactions as a secondary outcome; another four RCTs included infusion reactions in the safety evaluation analysis; and 62 additional studies focused on various aspects of mechanism/s, risk, primary and secondary preventive measures, and management algorithms. Seven studies were added by a manual search of reference lists of the relevant articles. A total of 76 original studies were included in quantitative analysis of the existing strategies. Conclusions: There is still paucity of systematic and controlled data on the risk, prevention, and management of infusion reactions to infliximab. We present working algorithms based on systematic and extensive review of the available data. More randomised controlled trials are needed in order to investigate the efficacy of the proposed preventive and management algorithms. PMID:26092578

  9. Sclerosing encapsulating peritonitis: a case report

    Energy Technology Data Exchange (ETDEWEB)

    Candido, Paula de Castro Menezes; Werner, Andrea de Freitas; Pereira, Izabela Machado Flores; Matos, Breno Assuncao; Pfeilsticker, Rudolf Moreira; Silva Filho, Raul, E-mail: paulacmcandido@yahoo.com.br [Hospital Felicio Rocho, Belo Horizonte, MG (Brazil)

    2015-01-15

    Sclerosing encapsulating peritonitis, a rare cause of bowel obstruction, was described as a complication associated with peritoneal dialysis which is much feared because of its severity. The authors report a case where radiological findings in association with clinical symptoms have allowed for a noninvasive diagnosis of sclerosing encapsulating peritonitis, emphasizing the high sensitivity and specificity of computed tomography to demonstrate the characteristic findings of such a condition. (author)

  10. Encapsulated Thermoelectric Modules for Advanced Thermoelectric Systems

    Science.gov (United States)

    Kambe, Mitsuru; Jinushi, Takahiro; Ishijima, Zenzo

    2014-06-01

    An encapsulated thermoelectric (TE) module consists of a vacuum-tight stainless-steel container in which an SiGe or BiTe TE module is encapsulated. This construction enables maximum performance and durability because: the thermal expansion mismatch between the hot and cold sides of the container can be accommodated by a sliding sheet in the container; the TE module inside is always kept in a vacuum environment, therefore no oxidation can occur; and the pressure difference between the inside and outside of the container reduces thermal contact resistance inside the container. Our encapsulated SiGe module features higher operating temperature—up to 650°C for both hot and cold sides. Other high-temperature modules and conventional BiTe modules, including both-sides and one-side skeleton types, have been encapsulated. Several variants of the encapsulated module are available. Encapsulated thermoelectric modules with integrated coolers contain cooling panels through which water can pass. If the module hot side is heated by a radiating heat source (radiation coupling) or convection of a hot gas or fluid (convection coupling), no pressing force on the module is necessary. It therefore features minimum contact resistance with the cooling duct, because no pressure is applied, maximum TE power, and minimum installation cost. Another, larger, variant is a quadruple flexible container in which four modules (each of maximum size 40 mm × 40 mm) are encapsulated. These encapsulated modules were used in a powder metallurgy furnace and were in use for more than 3000 h. Application to cryogenic temperatures simulating the liquid nitrogen gas vaporizer has been also attempted.

  11. Thrombolytic treatment for acute ischemic cerebral stroke: intraarterial urokinase infusion vs. intravenous heparin and urokinase infusion

    International Nuclear Information System (INIS)

    Ko, Gi Young; Suh, Dae Chul; Lee, Jae Hong; Kim, Jun Hyoung; Choi, Choong Gon; Lee, Ho Kyu; Lee, Myoung Chong

    1996-01-01

    To evaluate the efficacy and limitation of intra-arterial urokinase (IAUK) infusion for treatment of acute cerebral stroke. Twenty-seven acute cerebral stroke patients treated with IAUK infusion within six hours of stroke onset were reviewed. All patients showed normal initial brain findings on CT. In 21 patients, urokinase(5-15 x 10 5 IU) was administered through a microcatheter placed into or proximal to occluded segment. Mechanical disruption of thrombus by guidewire was performed in 17 patients. Angiographic and clinical responses and complications after IAUK infusion, were evaluated and the results were compared with those of intravenous heparin(N=19) and urokinase infusion(N=19). Complete or partial angiographic recanalization of occluded segment was found in 18 patients (67%), and neurologic improvement was followed in 14 patients(52%). The degree of improvement on the stroke scale score after IAUK infusion was statistically more significant(p<0.05) than that shown after intravenous heparin and urokinase infusion. Complications after IAUK infusion were large(15%) and small amount intracerebral hemorrhage(15%), contrast leakage into brain parenchyma(11%), and gastrointestinal bleeding(4%). Between the IAVK and the intravenous urokinase infusion group, differences in extent and types of complications were statistically insignificant, but were significantly higher in those two groups than in the intravenous heparin infusion group. IAUK infusion may be effective for the treatment of acute cerebral stroke

  12. Carbon Nanotube Infused Launch Vehicle Structures

    Data.gov (United States)

    National Aeronautics and Space Administration — For the past 5 years Orbital ATK has been investing in, prototyping, and testing carbon nanotube infused composite structures to evaluate their impact on launch...

  13. Cytokine production induced by non-encapsulated and encapsulated Porphyromonas gingivalis strains

    NARCIS (Netherlands)

    Kunnen, A.; Dekker, D.C.; van Pampus, M.G.; Harmsen, H.J.; Aarnoudse, J.G.; Abbas, F.; Faas, M.M.

    2012-01-01

    Objective: Although the exact reason is not known, encapsulated gram-negative Porphyromonas gingivalis strains are more virulent than non-encapsulated strains. Since difference in virulence properties may be due to difference in cytokine production following recognition of the bacteria or their

  14. Infusion Antihypoxants in Children with Critical Conditions

    Directory of Open Access Journals (Sweden)

    Yu. S. Aleksandrovich

    2014-01-01

    Full Text Available Hypoxia and mitochondrial damage are a key component of the pathogenesis and tanatogenesis of a critical condition, suggesting the need for its prevention and maximally rapid elimination. Objective: to analyze the efficacy and safety of infusion antihypoxants used in critically ill children from the results of researches. Materials and methods. Available investigations dealing with infusion therapy in children and papers on the use of infusion antihypoxants in adults in 2005 to 2013 were sought in the medical databases PubMed and Cochrane Library with their free availability and analyzed. Results. The analysis included 70 trials. The pathophysiology and pathobiochemistry of hypoxia in critically ill children are given; the current principles of its correction by infusion therapy are considered in detail. Particular emphasis is placed on trials evaluating the efficacy and safety of succinic acid solutions in children. Main indications for and contraindications to their use are demonstrated. Conclusion. The use of Krebs cycle substrate-based infusion antihypoxants (malate, succinate is an effective and promising procedure for the intensive therapy and correction of hypoxia in both adults and children with critical conditions. Considering the fact that papers on the use of infusion antihypoxants in children are scanty, there is a need for further investigations. 

  15. Encapsulation of noble gas in zeolites

    International Nuclear Information System (INIS)

    Dorea, A.

    1987-04-01

    The noble gases neon, argon, krypton and xenon were encapsulated hydrothermally as pure gases as well as in the form of mixtures in type A zeolite of various cationic compositions. As opposed to the starting material the encapsulates are X-ray amorphous and posess a very small specific surface area. Irrespective of the thermal pretreatment of the zeolites the optimal loading occured within a certain temperature window. The amount of gas trapped was essentially a function of the fixation pressure. Within the pressure range 50-2200 bar the obtained loading was independent from the type of noble gas. When mixtures of noble gases were encapsulated a small enrichment of the heavier noble gas, caused by kinetic and thermodynamic effects, was observed. The thermal stability of the encapsulates was found to be very high. Even at temperatures as high as 750 0 C a recrystallization to anorthite was only observed after practically all the trapped gas had been released. Experiments destined to clarify the mechanism of gas leckage at temperatures below 750 0 C suggest a diffusion controlled mechanism described by a √t law. Even at loadings of 45 ml/(STP) Kr/g the leckage predicted under conditions as expected during longterm storage of Kr-85 is extremely small. Kinetic data demonstrate that the gas is not trapped in the form of agglomerates but rather exists homogeneously distributed within the encapsulate. This result is substantiated by electron beam microanalysis. (orig./RB) [de

  16. Encapsulation of Natural Polyphenolic Compounds; a Review

    Directory of Open Access Journals (Sweden)

    Florence Edwards-Lévy

    2011-11-01

    Full Text Available Natural polyphenols are valuable compounds possessing scavenging properties towards radical oxygen species, and complexing properties towards proteins. These abilities make polyphenols interesting for the treatment of various diseases like inflammation or cancer, but also for anti-ageing purposes in cosmetic formulations, or for nutraceutical applications. Unfortunately, these properties are also responsible for a lack in long-term stability, making these natural compounds very sensitive to light and heat. Moreover, polyphenols often present a poor biodisponibility mainly due to low water solubility. Lastly, many of these molecules possess a very astringent and bitter taste, which limits their use in food or in oral medications. To circumvent these drawbacks, delivery systems have been developed, and among them, encapsulation would appear to be a promising approach. Many encapsulation methods are described in the literature, among which some have been successfully applied to plant polyphenols. In this review, after a general presentation of the large chemical family of plant polyphenols and of their main chemical and biological properties, encapsulation processes applied to polyphenols are classified into physical, physico-chemical, chemical methods, and other connected stabilization methods. After a brief description of each encapsulation process, their applications to polyphenol encapsulation for pharmaceutical, food or cosmetological purposes are presented.

  17. A remote drip infusion monitoring system employing Bluetooth.

    Science.gov (United States)

    Amano, Hikaru; Ogawa, Hidekuni; Maki, Hiromichi; Tsukamoto, Sosuke; Yonezawa, Yoshiharu; Caldwell, W Morton

    2012-01-01

    We have developed a remote drip infusion monitoring system for use in hospitals. The system consists of several infusion monitoring devices and a central monitor. The infusion monitoring device employing a Bluetooth module can detect the drip infusion rate and an empty infusion solution bag, and then these data are sent to the central monitor placed at the nurses' station via the Bluetooth. The central monitor receives the data from several infusion monitoring devices and then displays graphically them. Therefore, the developed system can monitor intensively the drip infusion situation of the several patients at the nurses' station.

  18. Subcutaneous insulin infusion: change in basal infusion rate has no immediate effect on insulin absorption rate

    International Nuclear Information System (INIS)

    Hildebrandt, P.; Birch, K.; Jensen, B.M.; Kuehl, C.

    1986-01-01

    Eight insulin-dependent diabetic patients were simultaneously given subcutaneous infusions (1.12 IU/h each) of 125 I-labeled Actrapid insulin in each side of the abdominal wall. After 24 h of infusion, the size of the infused insulin depots was measured by external counting for 5 h. The basal infusion rate was then doubled in one side and halved in the other for the next 4 h. Finally, 1.12 IU/h of insulin was given in both sides of the abdominal wall for an additional 3 h. The changes in the size of the depots were measured, and the absorption rates for each hour were calculated. During the first 5 h of infusion, the depot size was almost constant (approximately 5 IU) with an absorption rate that equaled the infusion rate. Doubling the infusion rate led to a significant increase in depot size, but the absorption rate remained unchanged for the first 3 h, and only thereafter was a significant increase seen. When the infusion rate was reduced to the initial 1.12 IU/h, the absorption rate remained elevated during the next 3 h. Correspondingly, when the infusion rate was decreased, the depot size also decreased, but the absorption rate remained unchanged for the first 3 h. The results show that a change in the basal insulin infusion rate does not lead to any immediate change in the insulin absorption rate. This should be considered when planning an insulin-infusion program that includes alteration(s) in the basal-rate setting

  19. Degradation of Silicone Encapsulants in CPV Optics

    Energy Technology Data Exchange (ETDEWEB)

    Cai, Can; Miller, David C.; Tappan, Ian A.; Dauskardt, Reinhold H.

    2016-11-21

    High efficiency multijunction solar cells in terrestrial concentrator photovoltaic (CPV) modules are becoming an increasingly cost effective and viable option in utility scale power generation. As with other utility scale photovoltaics, CPV modules need to guarantee operational lifetimes of at least 25 years. The reliability of optical elements in CPV modules poses a unique materials challenge due to the increased UV irradiance and enhanced temperature cycling associated with concentrated solar flux. The polymeric and thin film materials used in the optical elements are especially susceptible to UV damage, diurnal temperature cycling and active chemical species from the environment. We used fracture mechanics approaches to study the degradation modes including: the adhesion between the encapsulant and the cell or secondary optical element; and the cohesion of the encapsulant itself. Understanding the underlying mechanisms of materials degradation under elevated stress conditions is critical for commercialization of CPV technology and can offer unique insights into degradation modes in similar encapsulants used in other photovoltaic modules.

  20. Suppression of intrinsic roughness in encapsulated graphene

    DEFF Research Database (Denmark)

    Thomsen, Joachim Dahl; Gunst, Tue; Gregersen, Søren Schou

    2017-01-01

    Roughness in graphene is known to contribute to scattering effects which lower carrier mobility. Encapsulating graphene in hexagonal boron nitride (hBN) leads to a significant reduction in roughness and has become the de facto standard method for producing high-quality graphene devices. We have...... fabricated graphene samples encapsulated by hBN that are suspended over apertures in a substrate and used noncontact electron diffraction measurements in a transmission electron microscope to measure the roughness of encapsulated graphene inside such structures. We furthermore compare the roughness...... of these samples to suspended bare graphene and suspended graphene on hBN. The suspended heterostructures display a root mean square (rms) roughness down to 12 pm, considerably less than that previously reported for both suspended graphene and graphene on any substrate and identical within experimental error...

  1. Protein Encapsulation via Polypeptide Complex Coacervation

    Energy Technology Data Exchange (ETDEWEB)

    Black, Katie A.; Priftis, Dimitrios; Perry, Sarah L.; Yip, Jeremy; Byun, William Y.; Tirrell, Matthew

    2014-10-21

    Proteins have gained increasing success as therapeutic agents; however, challenges exist in effective and efficient delivery. In this work, we present a simple and versatile method for encapsulating proteins via complex coacervation with oppositely charged polypeptides, poly(L-lysine) (PLys) and poly(D/L-glutamic acid) (PGlu). A model protein system, bovine serum albumin (BSA), was incorporated efficiently into coacervate droplets via electrostatic interaction up to a maximum loading of one BSA per PLys/PGlu pair and could be released under conditions of decreasing pH. Additionally, encapsulation within complex coacervates did not alter the secondary structure of the protein. Lastly the complex coacervate system was shown to be biocompatible and interact well with cells in vitro. A simple, modular system for encapsulation such as the one presented here may be useful in a range of drug delivery applications.

  2. Nondestructive Assay Options for Spent Fuel Encapsulation

    Energy Technology Data Exchange (ETDEWEB)

    Tobin, Stephen J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jansson, Peter [Uppsala Univ. (Sweden)

    2014-10-02

    This report describes the role that nondestructive assay (NDA) techniques and systems of NDA techniques may have in the context of an encapsulation and deep geological repository. The potential NDA needs of an encapsulation and repository facility include safeguards, heat content, and criticality. Some discussion of the facility needs is given, with the majority of the report concentrating on the capability and characteristics of individual NDA instruments and techniques currently available or under development. Particular emphasis is given to how the NDA techniques can be used to determine the heat production of an assembly, as well as meet the dual safeguards needs of 1) determining the declared parameters of initial enrichment, burn-up, and cooling time and 2) detecting defects (total, partial, and bias). The report concludes with the recommendation of three integrated systems that might meet the combined NDA needs of the encapsulation/repository facility.

  3. Suitability of cement encapsulated ILW for transport

    International Nuclear Information System (INIS)

    Fitzpatrick, J.

    1989-01-01

    ILW arising during the reprocessing of nuclear fuel is to be encapsulated in cement in nominal 500-litre drums. It is important that the waste package produced can be safely transported to a deep repository. Preliminary assessments of the performances of waste packages during transport for a number of the ILW streams to be generated at Sellafield have been carried out. The results show that the proposed encapsulation process produces a waste package which can be transported to an acceptable standard of safety and which does not prejudice any aspects of transport. (author)

  4. Epoxy Foam Encapsulants: Processing and Dielectric Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Linda Domeier; Marion Hunter

    1999-01-01

    The dielectric performance of epoxy foams was investigated to determine if such materials might provide advantages over more standard polyurethane foams in the encapsulation of electronic assemblies. Comparisons of the dielectric characteristics of epoxy and urethane encapsulant foams found no significant differences between the two resin types and no significant difference between as-molded and machined foams. This study specifically evaluated the formulation and processing of epoxy foams using simple methylhydrosiloxanes as the flowing agent and compared the dielectric performance of those to urethane foams of similar density.

  5. Encapsulation of Probiotics: Proper Selection of the Probiotic Strain and the Influence of Encapsulation Technology and Materials on the Viability of Encapsulated Microorganisms.

    Science.gov (United States)

    Šipailienė, Aušra; Petraitytė, Sigita

    2018-03-01

    Probiotic encapsulation is an entire system that not only involves but also depends on many factors. Elements such as the encapsulation method itself, materials, environmental conditions, and last, but not least, the strain; all play an important role in the encapsulation process. The current paper focuses on the right selection of probiotics, the various stress factors that impact the survival capacity of probiotics during and after encapsulation, and the rational selection of appropriate protection strategies to overcome these factors and achieve the highest possible encapsulation efficiency under optimal conditions. This review discusses the effects of temperature, moisture content, and water activity as well as pH, oxygen, and pressure on the viabilities of microorganisms. The effect of the surface and structure of the capsules on the encapsulated microorganisms and the impact of the materials used for the encapsulation are discussed as well. Last, but not least, the importance of choosing the right bacteria is reviewed.

  6. Home infusion: overcoming the barriers to entry.

    Science.gov (United States)

    Franklin, David M

    2010-01-01

    The field of pharmacy service is evolving rapidly, as is the delivery of healthcare in general. From patients with infectious diseases dying because there was nothing available to fight the infections, to the involvement of an episodic-based model of care with patients traversing inpatient- and outpatient-based delivery systems, to the new frontier of chronic care and with supports such as the one by the Centers for Disease Control that hospital-acquired infections are killing about 100,000 Americans every year, the home infusion business has become a major alternative to in-hospital treatment. This article discusses the barriers to entry into the home infusion business and assists in the evaluation of a home infusion reimbursement organization.

  7. Design of Infusion Schemes for Neuroreceptor Imaging

    DEFF Research Database (Denmark)

    Feng, Ling; Svarer, Claus; Madsen, Karine

    2016-01-01

    for bolus infusion (BI) or programmed infusion (PI) experiments. Steady-state quantitative measurements can be made with one short scan and venous blood samples. The GABAA receptor ligand [(11)C]Flumazenil (FMZ) was chosen for this purpose, as it lacks a suitable reference region. Methods. Five bolus [(11)C...... state was attained within 40 min, which was 8 min earlier than the optimal BI (B/I ratio = 55 min). Conclusions. The system can design both BI and PI schemes to attain steady state rapidly. For example, subjects can be [(11)C]FMZ-PET scanned after 40 min of tracer infusion for 40 min with venous...

  8. Forearm metabolism during infusion of adrenaline

    DEFF Research Database (Denmark)

    Simonsen, L; Stefl, B; Bülow, J

    2000-01-01

    Human skeletal muscle metabolism is often investigated by measurements of substrate fluxes across the forearm. To evaluate whether the two forearms give the same metabolic information, nine healthy subjects were studied in the fasted state and during infusion of adrenaline. Both arms were...... catheterized in a cubital vein in the retrograde direction. A femoral artery was catheterized for blood sampling, and a femoral vein for infusion of adrenaline. Forearm blood flow was measured by venous occlusion strain-gauge plethysmography. Forearm subcutaneous adipose tissue blood flow was measured...... by the local 133Xe washout method. Metabolic fluxes were calculated as the product of forearm blood flow and a-v differences of metabolite concentrations. After baseline measurements, adrenaline was infused at a rate of 0.3 nmol kg-1 min-1. No difference in the metabolic information obtained in the fasting...

  9. Plastic molds reduce cost of encapsulating electric cable connectors

    Science.gov (United States)

    Knott, D.

    1964-01-01

    Resin casting of the aluminum master pattern forms a plastic mold for encapsulating a cable connector. An elastomer is injected into the mold and cured. The mold is disassembled leaving an elastomeric encapsulation around the connector.

  10. Electrospun Phospholipid Fibers as Micro-Encapsulation and Antioxidant Matrices

    DEFF Research Database (Denmark)

    Shekarforoush, Elhamalsadat; Mendes, Ana Carina Loureiro; Baj, Vanessa

    2017-01-01

    Electrospun phospholipid (asolectin) microfibers were investigated as antioxidants and encapsulation matrices for curcumin and vanillin. These phospholipid microfibers exhibited antioxidant properties which increased after the encapsulation of both curcumin and vanillin. The total antioxidant cap...

  11. Treatment of Diabetes with Encapsulated Islets

    NARCIS (Netherlands)

    de Vos, Paul; Spasojevic, Milica; Faas, Marijke M.; Pedraz, JL; Orive, G

    2010-01-01

    Cell encapsulation has been proposed for the treatment of a wide variety of diseases since it allows for transplantation of cells in the absence of undesired immunosuppression. The technology has been proposed to be a solution for the treatment of diabetes since it potentially allows a mandatory

  12. Factors influencing insulin secretion from encapsulated islets

    NARCIS (Netherlands)

    de Haan, BJ; Faas, MM; de Vos, P

    2003-01-01

    Adequate regulation of glucose levels by a microencapsulated pancreatic islet graft requires a minute-to-minute regulation of blood glucose. To design such a transplant, it is mandatory to have sufficient insight in factors influencing the kinetics of insulin secretion by encapsulated islets. The

  13. A problem encapsulated Б role of CT

    African Journals Online (AJOL)

    2010-03-15

    Mar 15, 2010 ... 1Department of Radiology, National Organ Transplant Program, Central Hospital, Tripoli, Libya;. 2Department of Surgery, Central Hospital, AlFatah University of Medical Sciences, Tripoli, Libya. Sclerosing encapsulating peritonitis (SEP) is a rare but serious complication of abdominal surgery, recurrent.

  14. Encapsulation of thermal energy storage media

    Energy Technology Data Exchange (ETDEWEB)

    Dhau, Jaspreet; Goswami, Dharendra; Jotshi, Chand K.; Stefanakos, Elias K.

    2017-09-19

    In one embodiment, a phase change material is encapsulated by forming a phase change material pellet, coating the pellet with flexible material, heating the coated pellet to melt the phase change material, wherein the phase change materials expands and air within the pellet diffuses out through the flexible material, and cooling the coated pellet to solidify the phase change material.

  15. Encapsulation, the Curriculum, and Third World Countries.

    Science.gov (United States)

    Jarchow, Elaine M.; Dhawan, Gita

    1982-01-01

    The global desire to educate the whole person is validated by interviews with Third World faculty and students concerning curriculums in India, Cameroon and Kenya to determine whether encapsulation--a partial and distorted image of external reality--is present and affects studies in their countries. (Author/CM)

  16. Stability of lipid encapsulated ferulic acid particles

    Science.gov (United States)

    Encapsulation of bioactive compounds by a solid lipid matrix provides stability and a mechanism for controlled release in formulated products. Phenolic compounds exhibit antioxidant and antimicrobial activities and have applications as functional food and feed additives. Ferulic acid, a common pheno...

  17. Stability of lipid encapsulated phenolic acid particles

    Science.gov (United States)

    Phenolic compounds such as ferulic acid and p-coumaric acids are potential bioactive additives for use in animal feeds to replace current antioxidants and antimicrobial compounds. These compounds are ubiquitous in plants and may be obtained from commodity grain crops and waste biomass. Encapsulation...

  18. Bioactive Compounds And Encapsulation Of Yanang ( Tiliacora ...

    African Journals Online (AJOL)

    Furthermore, this paper reports the design of the experimental method for optimization of Yanang encapsulation using three independent variables: the ratio of core material (Yanang), to wall material (gum Arabic), gum Arabic concentration and inlet temperature of spray drying on bioactive compounds stability. The stability ...

  19. Anisotropic silica mesostructures for DNA encapsulation

    Indian Academy of Sciences (India)

    ca nanostructures for DNA encapsulation studies and observed a loading capacity of ∼8 μg mg−1 of the sample. On functionalizing the pores of silica with amine group, the amount of DNA loaded on the rods decreases which is due to a reduction in the pore size upon grafting of amine groups. Keywords. Surfactant; reverse ...

  20. Anisotropic silica mesostructures for DNA encapsulation

    Indian Academy of Sciences (India)

    The encapsulation of biomolecules in inert meso or nanostructures is an important step towards controlling drug delivery agents. Mesoporous silica nanoparticles (MSN) are of immense importance owing to their high surface area, large pore size, uniform particle size and chemical inertness. Reverse micellar method with ...

  1. Nutritional management of encapsulating peritoneal sclerosis with ...

    African Journals Online (AJOL)

    Saspen Case Study: Nutritional management of encapsulating peritoneal sclerosis with intradialytic parenteral nutrition. 2014;27(1). S Afr J Clin Nutr. Kriel J, BSc(Dietetics); Clinical Dietitian; Esau N, MSc(Dietetics), Clinical Dietitian. Tygerberg Academic Hospital; Department of Health. Correspondence: Janine Kriel, e-mail: ...

  2. Suppression of intrinsic roughness in encapsulated graphene

    Science.gov (United States)

    Thomsen, Joachim Dahl; Gunst, Tue; Gregersen, Søren Schou; Gammelgaard, Lene; Jessen, Bjarke Sørensen; Mackenzie, David M. A.; Watanabe, Kenji; Taniguchi, Takashi; Bøggild, Peter; Booth, Timothy J.

    2017-07-01

    Roughness in graphene is known to contribute to scattering effects which lower carrier mobility. Encapsulating graphene in hexagonal boron nitride (hBN) leads to a significant reduction in roughness and has become the de facto standard method for producing high-quality graphene devices. We have fabricated graphene samples encapsulated by hBN that are suspended over apertures in a substrate and used noncontact electron diffraction measurements in a transmission electron microscope to measure the roughness of encapsulated graphene inside such structures. We furthermore compare the roughness of these samples to suspended bare graphene and suspended graphene on hBN. The suspended heterostructures display a root mean square (rms) roughness down to 12 pm, considerably less than that previously reported for both suspended graphene and graphene on any substrate and identical within experimental error to the rms vibrational amplitudes of carbon atoms in bulk graphite. Our first-principles calculations of the phonon bands in graphene/hBN heterostructures show that the flexural acoustic phonon mode is localized predominantly in the hBN layer. Consequently, the flexural displacement of the atoms in the graphene layer is strongly suppressed when it is supported by hBN, and this effect increases when graphene is fully encapsulated.

  3. Oil encapsulation techniques using alginate as encapsulating agent: applications and drawbacks.

    Science.gov (United States)

    Martins, Evandro; Poncelet, Denis; Rodrigues, Ramila Cristiane; Renard, Denis

    2017-12-01

    Oils are used in agriculture, nutrition, food and cosmetics; however, these substances are oxidisable and may readily lose their properties. To reduce their degradation or to mask certain undesirable aspects, one strategy consists in encapsulating the oil in inert structures (capsules). The capsules are classified according to the morphology, the number of cores and size, can be produced by several techniques: jet-cutting, vibrating jet, spray-drying, dispersion and milli-microfluidic. Among the polymers used as a membrane in the capsules, alginates are used in oil encapsulation because of their high gelling capacity, biocompatibility and low toxicity. In the presence of calcium ions, the alginate macromolecules crosslink to form a three-dimensional network called hydrogel. The oil encapsulation using alginate as encapsulating material can be carried out using technologies based on the external, internal or inverse gelation mechanisms. These capsules can found applications in areas as cosmetics, textile, foods and veterinary, for example.

  4. Costs of Providing Infusion Therapy for Rheumatoid Arthritis in a Hospital-based Infusion Center Setting.

    Science.gov (United States)

    Schmier, Jordana; Ogden, Kristine; Nickman, Nancy; Halpern, Michael T; Cifaldi, Mary; Ganguli, Arijit; Bao, Yanjun; Garg, Vishvas

    2017-08-01

    Many hospital-based infusion centers treat patients with rheumatoid arthritis (RA) with intravenous biologic agents, yet may have a limited understanding of the overall costs of infusion in this setting. The purposes of this study were to conduct a microcosting analysis from a hospital perspective and to develop a model using an activity-based costing approach for estimating costs associated with the provision of hospital-based infusion services (preparation, administration, and follow-up) in the United States for maintenance treatment of moderate to severe RA. A spreadsheet-based model was developed. Inputs included hourly wages, time spent providing care, supply/overhead costs, laboratory testing, infusion center size, and practice pattern information. Base-case values were derived from data from surveys, published studies, standard cost sources, and expert opinion. Costs are presented in year-2017 US dollars. The base case modeled a hospital infusion center serving patients with RA treated with abatacept, tocilizumab, infliximab, or rituximab. Estimated overall costs of infusions per patient per year were $36,663 (rituximab), $36,821 (tocilizumab), $44,973 (infliximab), and $46,532 (abatacept). Of all therapies, the biologic agents represented the greatest share of overall costs, ranging from 87% to $91% of overall costs per year. Excluding infusion drug costs, labor accounted for 53% to 57% of infusion costs. Biologic agents represented the highest single cost associated with RA infusion care; however, personnel, supplies, and overhead costs also contributed substantially to overall costs (8%-16%). This model may provide a helpful and adaptable framework for use by hospitals in informing decision making about services offered and their associated financial implications. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

  5. Effect of steel and teflon infusion catheters on subcutaneous adipose tissue blood flow and infusion counter pressure in humans

    DEFF Research Database (Denmark)

    Højbjerre, Lise; Skov-Jensen, Camilla; Kaastrup, Peter

    2009-01-01

    BACKGROUND: Subcutaneous tissue is an important target for drug deposition or infusion. A local trauma may induce alterations in local microcirculation and diffusion barriers with consequences for drug bioavailability. We examined the influence of infusion catheters' wear time on local...... microcirculation and infusion counter pressure. METHODS: One steel catheter and one Teflon (Dupont, Wilmington, DE) catheter were inserted in subcutaneous, abdominal adipose tissue (SCAAT) in 10 healthy, lean men. The catheters were infused with isotonic saline at a rate of 10 microL/h for 48 h. Another steel...... catheter and a Teflon catheter were inserted contralateral to the previous catheters after 48 h. The infusion counter pressure was measured during a basal infusion rate followed by a bolus infusion. The measurements during a basal rate infusion were repeated after the bolus infusion. Adipose tissue blood...

  6. Artificial tissue sensitized with encapsulated methylene blue encapsulated by silica nanoparticles in photodynamic therapy.

    Science.gov (United States)

    Makhadmeh, Ghaseb Naser; Abdul Aziz, Azlan; Abdul Razak, Khairunisak

    2016-08-01

    The synthesis of methylene blue (MB) encapsulated in silica nanoparticles (SiNPs) as an application for photodynamic therapy is reported in this study. Semi-rigid tissues with optical properties similar to that of human tissues were used as sample materials to determine the applicability of MB encapsulated in SiNPs. The changes in optical properties of the tissue treated with encapsulated MB under light exposure (Intensity at 664 nm ∼11.9 mW/cm(2)) were observed. The optimal exposure time required for naked MB and MB-SiNP to destroy red blood cells (RBCs) in the artificial tissue was also determined. The comparative analysis between the results of applying naked MB and MB encapsulated in SiNPs in the treatment of artificial tissue confirmed that the encapsulated MB is 62 percent higher in efficacy than naked MB. The results established the applicability of MB encapsulated in SiNP on artificial tissue and possible application on human tissue.

  7. Routine saline infusion sonohysterography prior to assisted ...

    African Journals Online (AJOL)

    53.85%), 8 (30.77%) and 4 (15.38%) respectively. The average duration of the procedure was 6 minutes with a range of 4-9 minutes. Saline infusion sonohysterography is a reliable, cost effective and safe diagnostic tool in the evaluation of the ...

  8. Forearm metabolism during infusion of adrenaline

    DEFF Research Database (Denmark)

    Simonsen, L; Stefl, B; Bülow, J

    2000-01-01

    Human skeletal muscle metabolism is often investigated by measurements of substrate fluxes across the forearm. To evaluate whether the two forearms give the same metabolic information, nine healthy subjects were studied in the fasted state and during infusion of adrenaline. Both arms were cathete...

  9. Comparison of infusion pumps calibration methods

    Science.gov (United States)

    Batista, Elsa; Godinho, Isabel; do Céu Ferreira, Maria; Furtado, Andreia; Lucas, Peter; Silva, Claudia

    2017-12-01

    Nowadays, several types of infusion pump are commonly used for drug delivery, such as syringe pumps and peristaltic pumps. These instruments present different measuring features and capacities according to their use and therapeutic application. In order to ensure the metrological traceability of these flow and volume measuring equipment, it is necessary to use suitable calibration methods and standards. Two different calibration methods can be used to determine the flow error of infusion pumps. One is the gravimetric method, considered as a primary method, commonly used by National Metrology Institutes. The other calibration method, a secondary method, relies on an infusion device analyser (IDA) and is typically used by hospital maintenance offices. The suitability of the IDA calibration method was assessed by testing several infusion instruments at different flow rates using the gravimetric method. In addition, a measurement comparison between Portuguese Accredited Laboratories and hospital maintenance offices was performed under the coordination of the Portuguese Institute for Quality, the National Metrology Institute. The obtained results were directly related to the used calibration method and are presented in this paper. This work has been developed in the framework of the EURAMET projects EMRP MeDD and EMPIR 15SIP03.

  10. Effect of intravenous dexmedetomidine infusion on some ...

    African Journals Online (AJOL)

    Background: This study was designed to evaluate the effect of intravenous dexmedetomidine infusion in patients undergoing major abdominal surgery on stress response markers as plasma interleukin-6, cortisol and blood glucose level. It also assessed its effect on recovery profile and postoperative pain. Methods: Thirty ...

  11. Acoustically excited encapsulated microbubbles and mitigation of biofouling

    KAUST Repository

    Qamar, Adnan

    2017-08-31

    Provided herein is a universally applicable biofouling mitigation technology using acoustically excited encapsulated microbubbles that disrupt biofilm or biofilm formation. For example, a method of reducing biofilm formation or removing biofilm in a membrane filtration system is provided in which a feed solution comprising encapsulated microbubbles is provided to the membrane under conditions that allow the encapsulated microbubbles to embed in a biofilm. Sonication of the embedded, encapsulated microbubbles disrupts the biofilm. Thus, provided herein is a membrane filtration system for performing the methods and encapsulated microbubbles specifically selected for binding to extracellular polymeric substances (EFS) in a biofilm.

  12. Bronchial arterial infusion versus bronchial combined pulmonary arterial infusion for pulmonary metastatic tumors

    International Nuclear Information System (INIS)

    Dong Sheng; Dong Weihua; Jia Ningyang; Zhang Dianbo; Xiao Xiangsheng

    2008-01-01

    Objective: To evaluate the pulmonary metastatic tumor response to different ways of transcatheter arterial infusion. Methods: Thirty-five patients with pulmonary metastatic tumors were randomized divided into two groups: 15 patients with 49 lesions treated with bronchial arterial infusion (BAI) and 20 patients with 65 lesions treated with bronchial arterial infusion (BM)combined with pulmonary arterial infusion (PAI). The therapeutic response was assessed by the WHO evaluation criteria. Results: The total effective rate(CR + PR) of BAI was 65.3% (32/49), PAI + BAI was 61.5%(40/65) showing no statistical difference. The median survival time of BAI was 9 mo, BAI + PAI was 11.5 mo, demonstrating no statistical significance. Conclusions: BAI should be the primary treatment for pulmonary metastatic tumor. (authors)

  13. Effects of dexmedetomidine infusion during spinal anesthesia on ...

    African Journals Online (AJOL)

    Effects of dexmedetomidine infusion during spinal anesthesia on hemodynamics and sedation. ... Libyan Journal of Medicine ... evaluated the effects of intravenous dexmedetomidine during spinal anesthesia on hemodynamics, respiratory rate, oxygen saturation, sedpain, and compared them with those of saline infusion.

  14. Thin film Encapsulations of Flexible Organic Light Emitting Diodes

    Directory of Open Access Journals (Sweden)

    Tsai Fa-Ta

    2016-01-01

    Full Text Available Various encapsulated films for flexible organic light emitting diodes (OLEDs were studied in this work, where gas barrier layers including inorganic Al2O3 thin films prepared by atomic layer deposition, organic Parylene C thin films prepared by chemical vapor deposition, and their combination were considered. The transmittance and water vapor transmission rate of the various organic and inorgabic encapsulated films were tested. The effects of the encapsulated films on the luminance and current density of the OLEDs were discussed, and the life time experiments of the OLEDs with these encapsulated films were also conducted. The results showed that the transmittance are acceptable even the PET substrate were coated two Al2O3 and Parylene C layers. The results also indicated the WVTR of the PET substrate improved by coating the barrier layers. In the encapsulation performance, it indicates the OLED with Al2O3 /PET, 1 pair/PET, and 2 pairs/PET presents similarly higher luminance than the other two cases. Although the 1 pair/PET encapsulation behaves a litter better luminance than the 2 pairs/PET encapsulation, the 2 pairs/PET encapsulation has much better life time. The OLED with 2 pairs/PET encapsulation behaves near double life time to the 1 pair encapsulation, and four times to none encapsulation.

  15. Hybrid chip-on-board LED module with patterned encapsulation

    Energy Technology Data Exchange (ETDEWEB)

    Soer, Wouter Anthon; Helbing, Rene; Huang, Guan

    2018-02-27

    Different wavelength conversion materials, or different concentrations of a wavelength conversion material are used to encapsulate the light emitting elements of different colors of a hybrid light emitting module. In an embodiment of this invention, second light emitting elements (170) of a particular color are encapsulated with a transparent second encapsulant (120;420;520), while first light emitting elements (160) of a different color are encapsulated with a wavelength conversion first encapsulant (110;410;510). In another embodiment of this invention, a particular second set of second and third light emitting elements (170,580) of different colors is encapsulated with a different encapsulant than another first set of first light emitting elements (160).

  16. Design documentation: Krypton encapsulation preconceptual design

    International Nuclear Information System (INIS)

    Knecht, D.A.

    1994-10-01

    US EPA regulations limit the release of Krypton-85 to the environment from commercial facilities after January 1, 1983. In order to comply with these regulations, Krypton-85, which would be released during reprocessing of commercial nuclear fuel, must be collected and stored. Technology currently exists for separation of krypton from other inert gases, and for its storage as a compressed gas in steel cylinders. The requirements, which would be imposed for 100-year storage of Krypton-85, have led to development of processes for encapsulation of krypton within a stable solid matrix. The objective of this effort was to provide preconceptual engineering designs, technical evaluations, and life cycle costing data for comparison of two alternate candidate processes for encapsulation of Krypton-85. This report has been prepared by The Ralph M. Parsons Company for the US Department of Energy

  17. Encapsulation of high temperature thermoelectric modules

    Energy Technology Data Exchange (ETDEWEB)

    Salvador, James R.; Sakamoto, Jeffrey; Park, Youngsam

    2017-07-11

    A method of encapsulating a thermoelectric device and its associated thermoelectric elements in an inert atmosphere and a thermoelectric device fabricated by such method are described. These thermoelectric devices may be intended for use under conditions which would otherwise promote oxidation of the thermoelectric elements. The capsule is formed by securing a suitably-sized thin-walled strip of oxidation-resistant metal to the ceramic substrates which support the thermoelectric elements. The thin-walled metal strip is positioned to enclose the edges of the thermoelectric device and is secured to the substrates using gap-filling materials. The strip, substrates and gap-filling materials cooperatively encapsulate the thermoelectric elements and exclude oxygen and water vapor from atmospheric air so that the elements may be maintained in an inert, non-oxidizing environment.

  18. Design documentation: Krypton encapsulation preconceptual design

    Energy Technology Data Exchange (ETDEWEB)

    Knecht, D.A. [Idaho National Engineering Lab., Idaho Falls, ID (United States)

    1994-10-01

    US EPA regulations limit the release of Krypton-85 to the environment from commercial facilities after January 1, 1983. In order to comply with these regulations, Krypton-85, which would be released during reprocessing of commercial nuclear fuel, must be collected and stored. Technology currently exists for separation of krypton from other inert gases, and for its storage as a compressed gas in steel cylinders. The requirements, which would be imposed for 100-year storage of Krypton-85, have led to development of processes for encapsulation of krypton within a stable solid matrix. The objective of this effort was to provide preconceptual engineering designs, technical evaluations, and life cycle costing data for comparison of two alternate candidate processes for encapsulation of Krypton-85. This report has been prepared by The Ralph M. Parsons Company for the US Department of Energy.

  19. Hanford waste encapsulation: strontium and cesium

    International Nuclear Information System (INIS)

    Jackson, R.R.

    1976-06-01

    The strontium and cesium fractions separated from high radiation level wastes at Hanford are converted to the solid strontium fluoride and cesium chloride salts, doubly encapsulated, and stored underwater in the Waste Encapsulation and Storage Facility (WESF). A capsule contains approximately 70,000 Ci of 137 Cs or 70,000 to 140,000 Ci of 90 Sr. Materials for fabrication of process equipment and capsules must withstand a combination of corrosive chemicals, high radiation dosages and frequently, elevated temperatures. The two metals selected for capsules, Hastelloy C-276 for strontium fluoride and 316-L stainless steel for cesium chloride, are adequate for prolonged containment. Additional materials studies are being done both for licensing strontium fluoride as source material and for second generation process equipment

  20. Concrete encapsulation for spent nuclear fuel storage

    International Nuclear Information System (INIS)

    Fleischer, L.R.; Gunasekaran, M.

    1981-01-01

    Concrete systems, mixtures and methods for encapsulating and storing spent nuclear fuel. Fuel discharged from nuclear reactors in the form of rods or multi-rod assemblies is completely and contiguously enclosed in concrete having incorporated therein metallic fibers to increase thermal conductivity and polymers to decrease fluid permeability. The metallic fibers and the polymers can be distributed in a single concrete layer, or separate contiguous layers can be utilized for the conductivity and impermeability characteristics

  1. Encapsulating peritonitis: computed tomography and surgical correlation

    Energy Technology Data Exchange (ETDEWEB)

    Kadow, Juliana Santos; Fingerhut, Carla Jeronimo Peres; Fernandes, Vinicius de Barros; Coradazzi, Klaus Rizk Stuhr; Silva, Lucas Marciel Soares; Penachim, Thiago Jose, E-mail: vinicius.barros.fernandes@gmail.com [Pontificia Universidade Catolica de Campinas (PUC-Campinas), Campinas, SP (Brazil). Hospital e Maternidade Celso Pierro

    2014-07-15

    Sclerosing encapsulating peritonitis is a rare and frequently severe entity characterized by total or partial involvement of small bowel loops by a membrane of fibrous tissue. The disease presents with nonspecific clinical features of intestinal obstruction, requiring precise imaging diagnosis to guide the treatment. The present report emphasizes the importance of computed tomography in the diagnosis of this condition and its confirmation by surgical correlation. (author)

  2. Development of nanostructures for encapsulation of vitamins

    OpenAIRE

    Azevedo, Maria Alexandra

    2013-01-01

    Dissertação de mestrado em Bioengenharia Vitamins are sensitive and unstable when exposed to inappropriate temperature, oxygen, light and humidity conditions. For the food industry it is important to reduce some of these limitations and being with nanosystems arise a promising solution. This work aims at the development of nanosystems for the encapsulation of riboflavin (watersoluble) and α-tocopherol (liposoluble) using biopolymer and their further characterization. For enc...

  3. 75 FR 21641 - Infusion Pumps; Public Meeting; Request for Comments

    Science.gov (United States)

    2010-04-26

    ...] Infusion Pumps; Public Meeting; Request for Comments AGENCY: Food and Drug Administration, HHS. ACTION... announcing a public meeting regarding external infusion pumps. The purpose of the meeting is to inform the public about current problems associated with external infusion pump use, to help the agency identify...

  4. Continuous infusion of chemotherapy: focus on 5-fluorouracil and fluorodeoxyuridine

    NARCIS (Netherlands)

    Poorter, R. L.; Bakker, P. J.; Veenhof, C. H.

    1998-01-01

    Continuous infusion of chemotherapy is one of the developments to try to improve the treatment of metastatic cancer. There is a sound theoretical rationale to deliver cytotoxic drugs as a continuous infusion. Furthermore, the development of reliable venous access devices and portable infusion pumps

  5. Micelle-encapsulated fullerenes in aqueous electrolytes

    Energy Technology Data Exchange (ETDEWEB)

    Ala-Kleme, T., E-mail: timo.ala-kleme@utu.fi [Department of Chemistry, University of Turku, 20014 Turku (Finland); Maeki, A.; Maeki, R.; Kopperoinen, A.; Heikkinen, M.; Haapakka, K. [Department of Chemistry, University of Turku, 20014 Turku (Finland)

    2013-03-15

    Different micellar particles Mi(M{sup +}) (Mi=Triton X-100, Triton N-101 R, Triton CF-10, Brij-35, M{sup +}=Na{sup +}, K{sup +}, Cs{sup +}) have been prepared in different aqueous H{sub 3}BO{sub 3}/MOH background electrolytes. It has been observed that these particles can be used to disperse the highly hydrophobic spherical [60]fullerene (1) and ellipsoidal [70]fullerene (2). This dispersion is realised as either micelle-encapsulated monomers Mi(M{sup +})1{sub m} and Mi(M{sup +})2{sub m} or water-soluble micelle-bound aggregates Mi(M{sup +})1{sub agg} and Mi(M{sup +})2{sub agg}, where especially the hydration degree and polyoxyethylene (POE) thickness of the micellar particle seems to play a role of vital importance. Further, the encapsulation microenvironment of 1{sub m} was found to depend strongly on the selected monovalent electrolyte cation, i.e., the encapsulated 1{sub m} is accommodated in the more hydrophobic microenvironment the higher the cationic solvation number is. - Highlights: Black-Right-Pointing-Pointer Different micellar particles is used to disperse [60]fullerene and [70]fullerene. Black-Right-Pointing-Pointer Fullerene monomers or aggregates are dispersed encaging or bounding by micelles. Black-Right-Pointing-Pointer Effective facts are hydration degree and polyoxyethylene thickness of micelle.

  6. Ultrasonographic findings of sclerosing encapsulating peritonitis

    Energy Technology Data Exchange (ETDEWEB)

    Han, Jong Kyu; Lee, Hae Kyung; Moon, Chul; Hong, Hyun Sook; Kwon, Kwi Hyang; Choi, Deuk Lin [Soonchunhyangi University College of Medicine, Seoul (Korea, Republic of)

    2001-03-15

    To evaluate the ultrasonographic findings of the patients with sclerosing encapsulating peritonitis (SEP). Thirteen patients with surgically confirmed sclerosing encapsulating peritonitis were involved in this study. Because of intestinal obstruction, all patients had received operations. Among 13 patients, 12 cases had continuous ambulatory peritoneal dialysis (CAPD) for 2 months-12 years and 4 months from (mean; 6 years and 10 months), owing to chronic renal failure and one patient had an operation due to variceal bleeding caused by liver cirrhosis. On ultrasonographic examination, all patients showed loculated ascites which were large (n=7) or small (n=6) in amount with multiple separations. The small bowel loops were tethered posteriorly perisaltic movement and covered with the thick membrane. The ultrasonographic of findings of sclerosing encapsulating peritonitis were posteriorly tethered small bowels covered with a thick membrane and loculated ascites with multiple septa. Ultrasonographic examination can detect the thin membrane covering the small bowel loops in the early phase of the disease, therefore ultrasonography would be a helpful modality to diagnose SEP early.

  7. An audit of hospital based outpatient infusions and a pilot program of community-based monoclonal antibody infusions.

    LENUS (Irish Health Repository)

    Doran, J-P

    2012-02-01

    INTRODUCTION: Infliximab, a chimeric monoclonal antibody to tumour necrosis factor alpha, is administered as an intravenous infusion requiring a costly hospital day case or inpatient admission. METHODS: An audit of all current therapies given by intravenous infusions in an outpatient setting in St Vincent\\'s University Hospital (SVUH) was undertaken. Furthermore, in conjunction with TCP homecare, we established in a general practise health clinic, the first Irish community infusion centre for the administration of infliximab in August 2006. RESULTS: All outpatient departments indicated that they would favour a centralized hospital infusion unit. There were no adverse events and the mean global satisfaction improved in the community infliximab infusion pilot programme of seven patients. CONCLUSION: This study suggests efficiencies in providing centralized infusion facilities, while the community based infusion of infliximab is feasible and safe in this small cohort and identifies the community infusion unit as a viable and cost efficient alternative for administration of infliximab.

  8. Micro-Encapsulated Phase Change Materials: A Review of Encapsulation, Safety and Thermal Characteristics

    Directory of Open Access Journals (Sweden)

    Ahmed Hassan

    2016-10-01

    Full Text Available Phase change materials (PCMs have been identified as potential candidates for building energy optimization by increasing the thermal mass of buildings. The increased thermal mass results in a drop in the cooling/heating loads, thus decreasing the energy demand in buildings. However, direct incorporation of PCMs into building elements undermines their structural performance, thereby posing a challenge for building integrity. In order to retain/improve building structural performance, as well as improving energy performance, micro-encapsulated PCMs are integrated into building materials. The integration of microencapsulation PCMs into building materials solves the PCM leakage problem and assures a good bond with building materials to achieve better structural performance. The aim of this article is to identify the optimum micro-encapsulation methods and materials for improving the energy, structural and safety performance of buildings. The article reviews the characteristics of micro-encapsulated PCMs relevant to building integration, focusing on safety rating, structural implications, and energy performance. The article uncovers the optimum combinations of the shell (encapsulant and core (PCM materials along with encapsulation methods by evaluating their merits and demerits.

  9. Hollow Carbon Nanofiber-Encapsulated Sulfur Cathodes for High Specific Capacity Rechargeable Lithium Batteries

    KAUST Repository

    Zheng, Guangyuan

    2011-10-12

    Sulfur has a high specific capacity of 1673 mAh/g as lithium battery cathodes, but its rapid capacity fading due to polysulfides dissolution presents a significant challenge for practical applications. Here we report a hollow carbon nanofiber-encapsulated sulfur cathode for effective trapping of polysulfides and demonstrate experimentally high specific capacity and excellent electrochemical cycling of the cells. The hollow carbon nanofiber arrays were fabricated using anodic aluminum oxide (AAO) templates, through thermal carbonization of polystyrene. The AAO template also facilitates sulfur infusion into the hollow fibers and prevents sulfur from coating onto the exterior carbon wall. The high aspect ratio of the carbon nanofibers provides an ideal structure for trapping polysulfides, and the thin carbon wall allows rapid transport of lithium ions. The small dimension of these nanofibers provides a large surface area per unit mass for Li2S deposition during cycling and reduces pulverization of electrode materials due to volumetric expansion. A high specific capacity of about 730 mAh/g was observed at C/5 rate after 150 cycles of charge/discharge. The introduction of LiNO3 additive to the electrolyte was shown to improve the Coulombic efficiency to over 99% at C/5. The results show that the hollow carbon nanofiber-encapsulated sulfur structure could be a promising cathode design for rechargeable Li/S batteries with high specific energy. © 2011 American Chemical Society.

  10. Anaphylaxis after intravenous infusion of dexketoprofen trometamol

    Directory of Open Access Journals (Sweden)

    Sertac Guler

    2016-09-01

    Full Text Available Dexketoprofen trometamol (DT, a nonsteroidal anti-inflammatory drug, is a highly water-soluble salt and active enantiomer of rac-ketoprofen. Its parenteral form is commonly used for acute pain management in emergency departments of our country. Side effects such as diarrhea, indigestion, nausea, stomach pain, and vomiting may be seen after the use of DT. Anaphylactic shock (AS secondary to infusion of DT is very rare and, to our knowledge, it is the first case report describing this side effect. This case report was presented to emphasize that AS may be seen after the use of DT. Keywords: Anaphylactic shock, Dexketoprofen trometamol, Intravenous infusion (MeSH database

  11. Software Engineering Technology Infusion Within NASA

    Science.gov (United States)

    Zelkowitz, Marvin V.

    1996-01-01

    Abstract technology transfer is of crucial concern to both government and industry today. In this paper, several software engineering technologies used within NASA are studied, and the mechanisms, schedules, and efforts at transferring these technologies are investigated. The goals of this study are: 1) to understand the difference between technology transfer (the adoption of a new method by large segments of an industry) as an industry-wide phenomenon and the adoption of a new technology by an individual organization (called technology infusion); and 2) to see if software engineering technology transfer differs from other engineering disciplines. While there is great interest today in developing technology transfer models for industry, it is the technology infusion process that actually causes changes in the current state of the practice.

  12. Superselective arterial infusion and concomitant radiotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Homma, Akihiro; Suzuki, Fumiyuki; Inuyama, Yukio; Fukuda, Satoshi [Hokkaido Univ., Sapporo (Japan). School of Medicine

    2003-05-01

    Superselective arterial infusion for patients with advanced head and neck cancer has been increasingly applied in Japan. We analyzed our experiences and evaluated the efficacy and safety of this treatment. Through October 1999 to March 2002, 29 patients, ranging in age between 33 and 71 years (median 52 years), received superselective intra-arterial infusion therapy of cisplatin (100-120 mg/m{sup 2}/week) with simultaneous intravenous infusion of thiosulfate for neutralizing cisplatin toxicity, and conventional concomitant extrabeam radiotherapy (65 Gy/26 f/6.5 weeks). Four patients were diagnosed with stage III and 25 with stage IV. Thirteen patients were considered contraindicated for surgery, and the other 16 patients rejected radical surgery. Primary tumor sites included paranasal sinus (11 patients), hypopharynx (7), oropharynx (6), oral cavity (4), and parotid gland (1). During the median follow-up period of 20 months, there was no apparent recurrence in 14 (48.3%) of 29 patients. Eleven (37.9%) patients died of disease, and three (10.3%) were alive with disease. In twenty-one patients (72.4%) the primary lesions were well-controlled. Acute toxic effects were moderate, and severe toxic events occurred in four cases, namely, methicillin-resistant staphylococcus aureus (MRSA) pneumonia, sepsis, tetraplasia, and osteoradionecrosis. We confirmed the effectiveness and safety of superselective arterial infusion and concomitant radiotherapy. Furthermore, we must establish the optimal procedures and schedule, as well as the indications for this treatment. This treatment protocol may improve the prognosis of patients with unresectable disease and patients rejecting surgical treatment. Further study in this particular area is needed. (author)

  13. Superselective arterial infusion and concomitant radiotherapy

    International Nuclear Information System (INIS)

    Homma, Akihiro; Suzuki, Fumiyuki; Inuyama, Yukio; Fukuda, Satoshi

    2003-01-01

    Superselective arterial infusion for patients with advanced head and neck cancer has been increasingly applied in Japan. We analyzed our experiences and evaluated the efficacy and safety of this treatment. Through October 1999 to March 2002, 29 patients, ranging in age between 33 and 71 years (median 52 years), received superselective intra-arterial infusion therapy of cisplatin (100-120 mg/m 2 /week) with simultaneous intravenous infusion of thiosulfate for neutralizing cisplatin toxicity, and conventional concomitant extrabeam radiotherapy (65 Gy/26 f/6.5 weeks). Four patients were diagnosed with stage III and 25 with stage IV. Thirteen patients were considered contraindicated for surgery, and the other 16 patients rejected radical surgery. Primary tumor sites included paranasal sinus (11 patients), hypopharynx (7), oropharynx (6), oral cavity (4), and parotid gland (1). During the median follow-up period of 20 months, there was no apparent recurrence in 14 (48.3%) of 29 patients. Eleven (37.9%) patients died of disease, and three (10.3%) were alive with disease. In twenty-one patients (72.4%) the primary lesions were well-controlled. Acute toxic effects were moderate, and severe toxic events occurred in four cases, namely, methicillin-resistant staphylococcus aureus (MRSA) pneumonia, sepsis, tetraplasia, and osteoradionecrosis. We confirmed the effectiveness and safety of superselective arterial infusion and concomitant radiotherapy. Furthermore, we must establish the optimal procedures and schedule, as well as the indications for this treatment. This treatment protocol may improve the prognosis of patients with unresectable disease and patients rejecting surgical treatment. Further study in this particular area is needed. (author)

  14. Scavenged body heat powered infusion pump

    International Nuclear Information System (INIS)

    Bell, Alexander; Ehringer, William D; McNamara, Shamus

    2013-01-01

    An infusion pump powered by body heat is investigated in this paper, with the goal of addressing the needs of dermal wound healing. The infusion pump incorporates a Knudsen gas pump, a type of thermally driven pump, to pneumatic push the pharmaceutical agent from a reservoir. Two designs are considered: an integrated pump and reservoir, and a design with cascaded pump and reservoir. Thermal models are developed for both pumps, and the simulations agree well with the experimental results. The integrated pump and reservoir design uses hydrophobic materials to prevent a flow from occurring unless the infusion pump is placed on a human body. Flow rates in the µL min −1 range for the integrated pump and reservoir, and approximately 70 µL min −1 for the cascaded pump were obtained. The dynamic behavior of the cascaded pump is described based on the thermal models. Multiple copies of the cascaded pump are easily made in series or parallel, to increase either the pressure or the flow rate. The flow rate of multiple pumps in series does not change, and the pressure of multiple pumps in parallel does not change. (paper)

  15. A rare case of zolendronate infusion complication leading to glaucoma filtration surgery

    Directory of Open Access Journals (Sweden)

    Khan A

    2011-08-01

    Full Text Available A Khan1, G Lascaratos1, T Rane-Malcolm2, R Sanders21Princess Alexandra Eye Pavilion, Edinburgh, 2Department of Ophthalmology, Queen Margaret Hospital, Dunfermline, Fife, UKAbstract: Zolendronic acid is a nitrogenous biphosphonate commonly used as an intravenous infusion for the management of Paget’s disease, osteoporosis, and hypercalcemia of malignancy. We report a rare and challenging complication of zolendronate infusion: unilateral acute anterior uveitis followed by persistently raised intraocular pressure despite being on four different classes of antiglaucoma medication. The challenge was that the patient required topical steroid to treat her uveitis in the background of known glaucoma with corresponding steroid response. She eventually underwent a left phacotrabeculectomy augmented with 5-fluorouracil. Four weeks postoperatively she developed an encapsulated bleb and underwent needling with 5-fluorouracil. This case highlights the importance of having a high index of suspicion for anterior uveitis in patients with a red and painful eye after initiating biphosphonate therapy. Caution should also be exercised when prescribing biphosponates to glaucoma patients.Keywords: biphosponates, anterior uveitis, intraocular pressure

  16. Effect of Insulin Infusion on Liver Protein Synthesis during Hemodialysis

    DEFF Research Database (Denmark)

    Reinhard, Mark; Frystyk, Jan; Jespersen, Bente

    2011-01-01

    Background Hemodialysis (HD) is a catabolic procedure that may contribute to the high frequency of protein-energy wasting among patients receiving maintenance HD. The present study investigated the additional effect of glucose and glucose-insulin infusion on liver protein synthesis during HD...... compared with a meal alone. Methods In a randomized cross-over study with three arms, 11 non-diabetic HD patients were assigned to receive a conventional HD session with either: • no treatment (NT) • IV infusion of glucose (G) • IV infusion of glucose-insulin (GI) During infusions blood glucose levels were...... maintained at 8.0-10.0 mmol/L by additional glucose infusion. Glucose and glucose-insulin infusions were commenced 2 h prior to HD and continued throughout the HD session. Fasting blood samples were collected at baseline before infusion and followed by the only meal allowed during the study. Results Blood...

  17. Infusion MR arteriography during hepatic arterial infusion chemotherapy. Evaluation of clinical usefulness

    International Nuclear Information System (INIS)

    Uchino, Minako; Takizawa, Kenji

    2003-01-01

    We developed a new method of infusion MR arteriography (IMRA) via an implantable port system using an infusion pump for the evaluation of drug distribution during hepatic arterial infusion chemotherapy. The purposes of this study were to optimize the method and evaluate its clinical usefulness. We used 3D-T1 turbo field echo (TFE) as the most suitable sequence for IMRA according to the results of a phantom model experiment. We examined 33 cases of liver cancer that had been treated by arterial infusion chemotherapy via the port system. The following investigations were performed: degree of tumor enhancement, intra- and extra- hepatic perfusion abnormality, and related toxicity. The evaluation of images was performed separately by two radiologists. IMRA provided good images of contrast enhancement, to reveal the perfusion patterns. The treatment response rate in the tumor group with well enhancement was higher than that of the group with poor enhancement (p<0.0001). Extrahepatic perfusion was well visualized and was correlated with toxicity (p<0.0001). IMRA is a useful method to evaluate drug perfusion for the optimization of arterial infusion chemotherapy. (author)

  18. Encapsulation of hazardous wastes into agglomerates

    International Nuclear Information System (INIS)

    Guloy, A.

    1992-01-01

    The objective of this study was to investigate the feasibility of using the cementitious properties and agglomeration characteristics of coal conversion byproducts to encapsulate and immobilize hazardous waste materials. The intention was to establish an economical way of co-utilization and co-disposal of wastes. In addition, it may aid in the eradication of air pollution problems associated with the fine-powdery nature of fly ash. Encapsulation into agglomerates is a novel approach of treating toxic waste. Although encapsulation itself is not a new concept, existing methods employ high-cost resins that render them economically unfeasible. In this investigation, the toxic waste was contained in a concrete-like matrix whereby fly ash and other cementitious waste materials were utilized. The method incorporates the principles of solidification, stabilization and agglomeration. Another aspect of the study is the evaluation of the agglomeration as possible lightweight aggregates. Since fly ash is commercially used as an aggregate, it would be interesting to study the effect of incorporating toxic wastes in the strength development of the granules. In the investigation, the fly ash self-cementation process was applied to electroplating sludges as the toxic waste. The process hoped to provide a basis for delisting of the waste as hazardous and, thereby greatly minimize the cost of its disposal. Owing to the stringent regulatory requirements for hauling and disposal of hazardous waste, the cost of disposal is significant. The current practice for disposal is solidifying the waste with portland cement and dumping the hardened material in the landfill where the cost varies between $700--950/ton. Partially replacing portland cement with fly ash in concrete has proven beneficial, therefore applying the same principles in the treatment of toxic waste looked very promising

  19. Thermoresponsive latexes for fragrance encapsulation and release.

    Science.gov (United States)

    Popadyuk, N; Popadyuk, A; Kohut, A; Voronov, A

    2016-04-01

    To synthesize cross-linked latex particles protecting the encapsulated fragrance at ambient temperatures and facilitating the release of cargo at the temperature of the surface of the skin that varies in different regions of the body between 33.5 and 36.9°C. Poly(stearyl acrylate) (PSA), a polymer with long crystallizable alkyl side chains (undergoes order-disorder transitions at 45°C), was chosen as the main component of the polymer particles. As a result, new thermoresponsive polymer particles for fragrance encapsulation were synthesized and characterized, including assessing the performance of particles in triggered release by elevated temperature. To obtain network domains of various crystallinity, stearyl acrylate was copolymerized with dipropylene glycol acrylate caprylate (DGAC) (comonomer) in the presence of a dipropylene glycol diacrylate sebacate (cross-linker) using the miniemulsion process. Comonomers and a cross-linker were mixed directly in a fragrance during polymerization. Fragrance release was evaluated at 25, 31, 35 and 39°C to demonstrate a new material potential in personal/health care skin-related applications. Particles protect the fragrance from evaporation at 25°C. The fragrance release rate gradually increases at 31, 35 and 39°C. Two slopes were found on release plots. The first slope corresponds to a rapid fragrance release. The second slope indicates a subsequent reduction in the release rate. Crystalline-to-amorphous transition of PSA triggers the release of fragrances from cross-linked latex particles at elevated temperatures. The presence of the encapsulated fragrance, as well as the inclusion of amorphous fragments in the polymer network, reduces the particle crystallinity and enhances the release. Release profiles can be tuned by temperature and controlled by the amount of loaded fragrance and the ratio of comonomers in the feed mixture. © 2015 Society of Cosmetic Scientists and the Société Française de Cosmétologie.

  20. Analysis of Double-encapsulated Fuel Rods

    Energy Technology Data Exchange (ETDEWEB)

    Hales, Jason Dean [Idaho National Laboratory; Medvedev, Pavel G [Idaho National Laboratory; Novascone, Stephen Rhead [Idaho National Laboratory; Perez, Danielle Marie [Idaho National Laboratory; Williamson, Richard L [Idaho National Laboratory

    2014-09-01

    In an LWR fuel rod, the cladding encapsulates the fuel, contains fission products, and transfers heat directly to the water coolant. In some situations, it may be advantageous to separate the cladding from the coolant through use of a secondary cladding or capsule. This may be done to increase confidence that the fuel or fission products will not mix with the coolant, to provide a mechanism for controlling the rod temperature, or to place multiple experimental rodlets within a single housing. With an axisymmetric assumption, it is possible to derive closed-form expressions for the temperature profile in a fuel rod using radially-constant thermal conductivity in the fuel. This is true for both a traditional fuel-cladding rod and a double-encapsulated fuel (fuel, cladding, capsule) configuration. Likewise, it is possible to employ a fuel performance code to analyse both a traditional and a double-encapsulated fuel. In the case of the latter, two sets of gap heat transfer conditions must be imposed. In this work, we review the equations associated with radial heat transfer in a cylindrical system, present analytic and computational results for a postulated power and gas mixture history for IFA-744, and describe the analysis of the AFC-2A, 2B metallic fuel alloy experiments at the Advanced Test Reactor, including the effect of a release of fission products into the cladding-capsule gap. The computational results for these two cases were obtained using BISON, a fuel performance code under development at Idaho National Laboratory.

  1. Hydrogels for in situ encapsulation of biomimetic membrane arrays

    DEFF Research Database (Denmark)

    Ibragimova, Sania; Jensen, Karin Bagger Stibius; Szewczykowski, Piotr Przemyslaw

    2012-01-01

    Hydrogels are hydrophilic, porous polymer networks that can absorb up to thousands of times their own weight in water. They have many potential applications, one of which is the encapsulation of freestanding black lipid membranes (BLMs) for novel separation technologies or biosensor applications....... membranes retained their integrity and functionality after encapsulation with hydrogel. Our results show that hydrogel encapsulation is a potential means to provide stability for biomimetic devices based on functional proteins reconstituted in biomimetic membrane arrays....

  2. Investigations into encapsulation of intermediate level wastes containing organic components

    International Nuclear Information System (INIS)

    Palmer, J.

    1988-01-01

    A product evaluation programme was set up to investigate the properties of a variety of matrix-waste formulations prior to their encapsulation. The waste/matrix forms were defined and characterised and waste pretreatments studied. Potential encapsulation matrices were investigated for their suitability for individual waste streams. The physical, chemical and thermal properties, radiation stability and leaching behaviour of the formulations were studied. Operational and design limits for the encapsulation plant were defined. (U.K.)

  3. Spin transport studies in encapsulated CVD graphene

    Science.gov (United States)

    Avsar, Ahmet; You Tan, Jun; Ho, Yuda; Koon, Gavin; Oezyilmaz, Barbaros

    2013-03-01

    Spin transport studies in exfoliated graphene on SiO2/Si substrates have shown spin relaxation times that are orders of magnitude shorter than the theoretical predictions. Similar to the charge transport case, the underlying substrate is expected to be the limiting factor. The recent work Zomer, P. J. et al. shows that spin transport over lengths up to 20um is possible in high mobility exfoliated graphene devices on boron nitride (BN) substrates. Here we discuss our initial attempts to repeat such spin transport experiments with CVD graphene on BN substrates. The effect of encapsulation of such devices with an extra BN layer will be also discussed.

  4. Method of encapsulating waste radioactive material

    International Nuclear Information System (INIS)

    Forrester, J.A.; Rootham, M.W.

    1982-01-01

    When encapsulating radioactive waste including radioactive liquid having a retardant therein which retards the setting of cements by preventing hydration at cement particles in the mix, the liquid is mixed with ordinary Portland cement and subjected, in a high shear mixer, to long term shear far in excess of that needed to form ordinary grout. The controlled utilization of the retardants plus shear produces a thixotropic paste with extreme moldability which will not bleed, and finally sets more rapidly than can be expected with normal cement mixtures forming a very strong product. (author)

  5. Computed tomography appearances of sclerosing encapsulating peritonitis

    Energy Technology Data Exchange (ETDEWEB)

    George, C. [Department of Radiology, Hull Royal Infirmary, Hull (United Kingdom)]. E-mail: cheriangeorge@hotmail.com; Al-Zwae, K. [Department of Radiology, Hull Royal Infirmary, Hull (United Kingdom); Nair, S. [Department of Radiology, Hull Royal Infirmary, Hull (United Kingdom); Cast, J.E.I. [Department of Radiology, Hull Royal Infirmary, Hull (United Kingdom)

    2007-08-15

    Sclerosing encapsulating peritonitis (SEP) is a serious complication of peritoneal dialysis (PD) characterized by thickened peritoneal membranes, which lead to decreased ultra-filtration and intestinal obstruction. Its early clinical features are nonspecific, and it is often diagnosed late following laparotomy and peritoneal biopsy, when the patient develops small bowel obstruction, which can be a life-threatening complication. However, this is changing with increasing awareness of computed tomography (CT) findings in SEP. CT can yield an early, non-invasive diagnosis that may improve patient outcome. We present a review of the CT appearances of SEP.

  6. Stabilization and encapsulation of magnetite nanoparticles

    Science.gov (United States)

    Kawni, Issmat Al; Garcia, Ricardo; Youssef, Sami; Abboud, Maher; Podlecki, Jean; Habchi, Roland

    2016-12-01

    The goal is to stabilize magnetite nanoparticles (NPs) in order to prepare them for encapsulation and to obtain a core-shell structure. Magnetite NPs were obtained by a co-precipitation method and then treated with different stabilizing agents in order to get a full dispersion in an aqueous medium. The dispersed particles were then coated with silica using a TEOS solution. The samples were characterized by Raman spectroscopy, TEM, EDX analysis, and FTIR measurements. The particles are the basis of a core-shell structure where a potential polymer or drug could be anchored on the surface.

  7. Encapsulation of testosterone by chitosan nanoparticles.

    Science.gov (United States)

    Chanphai, P; Tajmir-Riahi, H A

    2017-05-01

    The loading of testosterone by chitosan nanoparticles was investigated, using multiple spectroscopic methods, thermodynamic analysis, TEM images and modeling. Thermodynamic parameters showed testosterone-chitosan bindings occur mainly via H-bonding and van der Waals contacts. As polymer size increased more stable steroid-chitosan conjugates formed and hydrophobic contact was also observed. The loading efficacy of testosterone-nanocarrier was 40-55% and increased as chitosan size increased. Testosterone encapsulation markedly alters chitosan morphology. Chitosan nanoparticles are capable of transporting testosterone in vitro. Copyright © 2017 Elsevier B.V. All rights reserved.

  8. Process for the encapsulation of radioactive wastes

    International Nuclear Information System (INIS)

    Pordes, O.; Plows, J.P.; Hill, M.L.

    1980-01-01

    Radioactive waste material, particularly radioactive ion exchange resin in the wet condition, is encapsulated in a polyurethane by dispersing the waste in an aqueous emulsion of an organic polyol, a polyisocyanate and an hydraulic cement and allowing the emulsion to set to form a monolithic block. If desired the emulsion may also contain additional filler e.g. sand or aggregate to increase the density of the final product. Preferred polyurethanes are those made from a polyester polyol and an organic diisocyanate, particularly hexamethylene diisocyanate. (author)

  9. Encapsulation of high temperature molten salts

    Science.gov (United States)

    Oxley, James D.; Mathur, Anoop Kumar

    2017-05-16

    The present disclosure relates to a method of encapsulating microcapsules containing relatively high temperature phase change materials and the microcapsules so produced. The microcapsules are coated with an inorganic binder, film former and an inorganic filler. The microcapsules may include a sacrificial layer that is disposed between the particle and the coating. The microcapsules may also include an inner coating layer, sacrificial layer and outer coating layer. The microcapsules are particularly useful for thermal energy storage in connection with, e.g., heat collected from concentrating solar collectors.

  10. Noninvasive encapsulated fiber optic probes for interferometric measurement

    Science.gov (United States)

    Zboril, O.; Cubik, J.; Kepak, S.; Nedoma, J.; Fajkus, M.; Zavodny, P.; Vasinek, V.

    2017-10-01

    This article focuses on the sensitivity of encapsulated interferometric probes. These probes are used mainly for BioMed and security applications. Fiber-optic sensors are interesting for these applications, as they are resistant to electromagnetic interference (EMI) and that also do not affect the surrounding medical and security equipment. Using a loop of the optical fiber with is not a suitable for these measurements. The optical fiber should be fixed to one position, and should not significantly bend. For these reasons, the optical fiber is encapsulated. Furthermore, it is necessary that the encapsulated measuring probes were flexible, inert, water resistant and not toxic. Fiber-optic sensors shouldn't be magnetically active, so they can be used for example, in magnetic resonance environments (MR). Probes meeting these requirements can be widely used in health care and security applications. Encapsulation of interferometric measuring arm brings changes in susceptibility of measurements in comparison with the optical fiber without encapsulation. To evaluate the properties of the encapsulated probes, series of probes made from different materials for encapsulation was generated, using two types of optical fibers with various degrees of protection. Comparison of the sensitivity of different encapsulated probes was performed using a series of measurements at various frequencies. The measurement results are statistically compared in the article and commented. Given the desired properties polydimethylsiloxane (PDMS) polymer has been proven the most interesting encapsulating material for further research.

  11. Photovoltaic module encapsulation design and materials selection. Volume II

    Energy Technology Data Exchange (ETDEWEB)

    Cuddihy, E.

    1984-06-01

    This is Volume II of Photovoltaic Module Encapsulation Design and Materials Selection: a periodically updated handbook of encapsulation technology, developed with the support of the Flat-Plate Solar Array Project (FSA), managed for the Department of Energy (DOE) by the Jet Propulsion Laboratory. Volume II describes FSA encapsulation technology developed between June 1, 1982, and January 1, 1984. Emphasis during this period shifted from materials development to demonstration of reliability and durability in an outdoor environment; the updated information in this volume reflects the developing technology base related to both reliability and encapsulation process improvements.

  12. Cryopreservation of 'Nabali' olive (Olea europea l.) somatic embryos by encapsulation-dehydration and encapsulation-vitrification.

    Science.gov (United States)

    Shibli, R A; Al-Juboory, K H

    2000-01-01

    Olive (Olea europea L.) somatic embryos were successfully cryopreserved using encapsulation-dehydration and encapsulation-vitrification. In the encapsulation-dehydration procedure, a maximum of 48% embryo survival was obtained when bead moisture content was decreased to 21.1% after 4 h dehydration. Preculture of embryos for 4 d in medium containing 0.75 to 1.25 M sucrose produced higher (40 to 34 %, respectively) regrowth after cryopreservation using encapsulation-dehydration procedure. Dehydration of beads for 3 h in PVS2 ensured higher survival (64%) of encapsulated-vitrified and cryopreserved (EVN) somatic embryos. Thermal treatment of embryogenic callus for 1 d at 30 degree C was very effective to increase survival of encapsulated-dehydrated and cryopreserved (EDN) (58%) and EVN (68%) embryos. Plantlets produced from control and cryopreserved embryos were phenotypically similar.

  13. Endothelial Cell Toxicity of Vancomycin Infusion Combined with Other Antibiotics

    Science.gov (United States)

    Drouet, Maryline; Chai, Feng; Barthélémy, Christine; Lebuffe, Gilles; Debaene, Bertrand; Odou, Pascal

    2015-01-01

    French guidelines recommend central intravenous (i.v.) infusion for high concentrations of vancomycin, but peripheral intravenous (p.i.v.) infusion is often preferred in intensive care units. Vancomycin infusion has been implicated in cases of phlebitis, with endothelial toxicity depending on the drug concentration and the duration of the infusion. Vancomycin is frequently infused in combination with other i.v. antibiotics through the same administrative Y site, but the local toxicity of such combinations has been poorly evaluated. Such an assessment could improve vancomycin infusion procedures in hospitals. Human umbilical vein endothelial cells (HUVEC) were challenged with clinical doses of vancomycin over 24 h with or without other i.v. antibiotics. Cell death was measured with the alamarBlue test. We observed an excess cellular death rate without any synergistic effect but dependent on the numbers of combined infusions when vancomycin and erythromycin or gentamicin were infused through the same Y site. Incompatibility between vancomycin and piperacillin-tazobactam was not observed in our study, and rinsing the cells between the two antibiotic infusions did not reduce endothelial toxicity. No endothelial toxicity of imipenem-cilastatin was observed when combined with vancomycin. p.i.v. vancomycin infusion in combination with other medications requires new recommendations to prevent phlebitis, including limiting coinfusion on the same line, reducing the infusion rate, and choosing an intermittent infusion method. Further studies need to be carried out to explore other drug combinations in long-term vancomycin p.i.v. therapy so as to gain insight into the mechanisms of drug incompatibility under multidrug infusion conditions. PMID:26055373

  14. Viscous effects in liquid encapsulated liquid bridges

    International Nuclear Information System (INIS)

    Johnson, Duane T.

    2002-01-01

    An analytical derivation of the surface deflections and the streamfunctions for the flow inside a liquid encapsulated liquid bridge has been derived using an asymptotic expansion about a small capillary number. The model assumes an initially flat and cylindrical interface under the assumption that the densities of both fluids are equal. To simplify the analysis, the top and bottom walls are assumed to be stress-free and the Reynolds number is assumed to be negligible. Flow is generated either by a moving outer wall (shear-driven flow) or by applying a temperature difference across the top and bottom walls (Marangoni-driven flow). The resulting equations show that for the shear-driven flow, as the viscosity ratio increases, the surface deflections increase monotonically. For the Marangoni-driven flow there exist values of the viscosity ratio where the surface deflections reach a minimum and then switch signs. This investigation shows that it may be possible in more realistic systems to use an outer encapsulating liquid of the proper viscosity ratio to stabilize the liquid-liquid interface during float zone crystal growth

  15. Stabilization of reactive species by supramolecular encapsulation.

    Science.gov (United States)

    Galan, Albano; Ballester, Pablo

    2016-03-21

    Molecular containers have attracted the interest of supramolecular chemists since the early beginnings of the field. Cavitands' inner cavities were quickly exploited by Cram and Warmuth to construct covalent containers able to stabilize and assist the characterization of short-lived reactive species such as cyclobutadiene or o-benzyne. Since then, more complex molecular architectures have been prepared able to store and isolate a myriad of fleeting species (i.e. organometallic compounds, cationic species, radical initiators…). In this review we cover selected examples of the stabilization of reactive species by encapsulation in molecular containers from the first reports of covalent containers described by Cram et al. to the most recent examples of containers with self-assembled structure (metal coordination cages and hydrogen bonded capsules). Finally, we briefly review examples reported by Rebek et al. in which elusive reaction intermediates could be detected in the inner cavities of self-folding resorcin[4]arene cavitands by the formation of covalent host-guest complexes. The utilization of encapsulated reactive species in catalysis or synthesis is not covered.

  16. Anaphylaxis after intravenous infusion of dexketoprofen trometamol.

    Science.gov (United States)

    Guler, Sertac; Ertok, Ilyas; Sahin, Nurdan Yilmaz; Ramadan, Hayri; Katirci, Yavuz

    2016-09-01

    Dexketoprofen trometamol (DT), a nonsteroidal anti-inflammatory drug, is a highly water-soluble salt and active enantiomer of rac-ketoprofen. Its parenteral form is commonly used for acute pain management in emergency departments of our country. Side effects such as diarrhea, indigestion, nausea, stomach pain, and vomiting may be seen after the use of DT. Anaphylactic shock (AS) secondary to infusion of DT is very rare and, to our knowledge, it is the first case report describing this side effect. This case report was presented to emphasize that AS may be seen after the use of DT.

  17. Developing a System for Integraded Automatic Control of Mutiple Infusion Pumps : The Multiplex infusion system

    NARCIS (Netherlands)

    Doesburg, Frank

    2013-01-01

    Most errors in ICUs are related to intravenous (IV) therapy. Previous studies suggested that hard to operate infusion pumps and the high cognitive workload for ICU nurses contribute to these errors. Conventional IV therapy requires separate lumens for incompatible IV drugs. This often requires the

  18. Tolerance to continuous intrathecal baclofen infusion can be reversed by pulsatile bolus infusion

    NARCIS (Netherlands)

    Heetla, H. W.; Staal, M. J.; van Laar, T.

    Study design: Pilot study. Objective: To study the effect of pulsatile bolus infusion of intrathecal baclofen (ITB) on daily ITB dose, in patients showing dose increases, probably due to tolerance. Setting: Department of neurology and neurosurgery, University Medical Center Groningen, the

  19. Drag reduction using slippery liquid infused surfaces

    Science.gov (United States)

    Hultmark, Marcus; Stone, Howard; Smits, Alexander; Jacobi, Ian; Samaha, Mohamed; Wexler, Jason; Shang, Jessica; Rosenberg, Brian; Hellström, Leo; Fan, Yuyang

    2013-11-01

    A new method for passive drag reduction is introduced. A surface treatment inspired by the Nepenthes pitcher plant, previously developed by Wong et al. (2011), is utilized and its design parameters are studied for increased drag reduction and durability. Nano- and micro-structured surfaces infused with a lubricant allow for mobility within the lubricant itself when the surface is exposed to flow. The mobility causes slip at the fluid-fluid interface, which drastically reduces the viscous friction. These new surfaces are fundamentally different from the more conventional superhydrophobic surfaces previously used in drag reduction studies, which rely on a gas-liquid interface. The main advantage of the liquid infused surfaces over the conventional surfaces is that the lubricant adheres more strongly to the surface, decreasing the risk of failure when exposed to turbulence and other high-shear flows. We have shown that these surfaces can reduce viscous drag up to 20% in both Taylor-Couette flow and in a parallel plate rheometer. Supported under ONR Grants N00014-12-1-0875 and N00014-12-1-0962 (program manager Ki-Han Kim).

  20. Drop friction on liquid-infused surfaces

    Science.gov (United States)

    Gas, Armelle; Keiser, Ludovic; Clanet, Christophe; Quere, David

    2017-11-01

    Trapping a thin liquid film in the roughness of a textured material creates a surface that is partially solid and partially liquid, referred to as a lubricant-impregnated surface. Those surfaces have recently raised a great interest for their promising industrial applications. Indeed, they proved to drastically reduce adhesion of a broad range of liquids, leading to enhanced mobility, and strong anti-biofouling, anti-icing and anti-fogging properties. In our talk we discuss the nature of the friction generated as a drop glides on a textured material infused by another liquid. Different regimes are observed, depending on the viscosities of both liquids. While a viscous drop is simply opposed by a Stokes-type friction, the force opposing a drop moving on a viscous substrate becomes non-linear in velocity. A liquid on an infused material is surrounded by a meniscus, and this specific feature is proposed to be responsible for the special observed frictions, on both adhesive and nonadhesive substrates.

  1. The interpretation of encapsulating anaphors in Spanish and their functions

    DEFF Research Database (Denmark)

    Dam, Lotte

    2014-01-01

    Encapsulating anaphors differ from other types of anaphor by having one or more situations - not an entity - as its referent. The main aim of the article is to propose a hypothesis for how anaphoric encapsulation is resolved. The hypothesis builds on the cognitive linguistic theory of instruction...

  2. Biodegradation Potential of Oil-based Drill Cuttings Encapsulated ...

    African Journals Online (AJOL)

    Michael Horsfall

    equally divided into 5 plastic containers. Cement encapsulated oil-based drill cuttings were prepared by ... Into each of the plastic containers containing the soil sample, one slab each of the cement encapsulated drill cuttings was ..... Estimating biodegradable municipal solid waste diversion from landfill. Phase 1 Review of ...

  3. Spin transport in fully hexagonal boron nitride encapsulated graphene

    NARCIS (Netherlands)

    Gurram, M.; Omar, S.; Zihlmann, S.; Makk, P.; Schoenenberger, C.; van Wees, B. J.

    2016-01-01

    We study fully hexagonal boron nitride (hBN) encapsulated graphene spin valve devices at room temperature. The device consists of a graphene channel encapsulated between two crystalline hBN flakes: thick-hBN flake as a bottom gate dielectric substrate which masks the charge impurities from SiO2/Si

  4. Photovoltaic-module encapsulation design and materials selection: Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    Cuddihy, E.; Carroll, W.; Coulbert, C.; Gupta, A.; Liang, R.

    1982-06-01

    Encapsulation-material system requirements, material-selection criteria, and the status and properties of encapsulation materials and processes available to the module manufacturer are presented in detail. Technical and economic goals established for photovoltaic modules and encapsulation systems and their status are described for material suppliers to assist them in assessing the suitability of materials in their product lines and the potential of new-material products. A comprehensive discussion of available encapsulation technology and data is presented to facilitate design and material selection for silicon flat-plate photovoltaic modules, using the best materials available and processes optimized for specific power applications and geographic sites. A basis is provided for specifying the operational and environmental loads that encapsulation material systems must resist. Potential deployment sites for which cost effectiveness may be achieved at a module price much greater than $0.70/W/sub p/, are also considered; data on higher-cost encapsulant materials and processes that may be in use and other material candidates that may be justified for special application are discussed. Described are encapsulation-system functional requirements and candidate design concepts and materials that have been identified and analyzed as having the best potential to meet the cost and performance goals for the Flat-Plate Solar Array Project. The available data on encapsulant material properties, fabrication processing, and module life and durability characteristics are presented.

  5. Characterization studies of lower and non-TDI polyurethane encapsulants

    International Nuclear Information System (INIS)

    Wilson, M.H.

    1993-09-01

    Polyurethane prepolymers containing toluene diisocyanate (TDI) are used within the Nuclear Weapons complex for many adhesive and encapsulation applications. As part of a program for minimizing hazards to workers and the environment, TDI will be eliminated. This report presents evaluation of alternative encapsulants

  6. Considerations for successful transplantation of encapsulated pancreatic islets

    NARCIS (Netherlands)

    de Vos, P; Hamel, AF; Tatarkiewicz, K

    Encapsulation of pancreatic islets allows for transplantion in the absence of immunosuppression. The technology is based on the principle that transplanted tissue is protected for the host immune system by an artificial membrane. Encapsulation offers a solution to the shortage of donors in clinical

  7. Accelerated ripening of Kashar cheese with encapsulated protease ...

    African Journals Online (AJOL)

    In this study, protease enzymes were encapsulated in Κ-carragenan, gellan and sodium alginate using emulsion and extrusion techniques and were then added in cheese milk together with rennet. The effects of the encapsulating material and ripening period on the chemical, textural and sensory characteristics of Kashar ...

  8. Comparative assessment of plasmid DNA delivery by encapsulation ...

    African Journals Online (AJOL)

    Purpose: To compare the gene delivery effectiveness of plasmid DNA (pDNA) encapsulated within poly (D,L-lactide-co-glycolide) (PLGA) nanoparticles with that adsorbed on PLGA nanoparticles. Methods: PLGA nanoparticles were prepared using solvent-evaporation method. To encapsulate pDNA within the particles, ...

  9. Mechanical Robustness and Hermeticity Monitoring for MEMS Thin Film Encapsulation

    NARCIS (Netherlands)

    Santagata, F.

    2011-01-01

    Many Micro-Electro-Mechanical-Systems (MEMS) require encapsulation, to prevent delicate sensor structures being exposed to external perturbations such as dust, humidity, touching, and gas pressure. An upcoming and cost-effective way of encapsulation is zero-level packaging or thin-film

  10. Primary Amyloidosis Presenting as Small Bowel Encapsulation

    Directory of Open Access Journals (Sweden)

    Jennifer Jones

    2004-01-01

    Full Text Available Amyloidosis is a pathological process which encompasses a spectrum of diseases that result from extracellular deposition of pathological fibrillar proteins. Clinical presentations vary depending on the organs involved. There is no documented case of amyloidosis presenting as small bowel encapsulation. A previously healthy 62-year-old man developed a small bowel obstruction in 1997. At surgery, a peculiar membrane encasing his entire small bowel was discovered. This appeared to have no vascularity and was removed without difficulty, exposing a grossly normal bowel. Histopathology revealed thick bands of collagen overlying the peritoneal surface, which was congo red positive and showed apple green birefringence. The findings were consistent with encapsulating peritonitis due to amyloidosis. There was no history or symptoms of any chronic inflammatory condition and he became symptom-free postoperatively. An abdominal fat pad biopsy failed to demonstrate amyloidosis. Endoscopic duodenal biopsies revealed classical primary amyloidosis. Quantitative immunoglobulins, lactate dehydrogenase, C3, C4 and beta-2 microglobulin were normal. Protein electrophoresis identified monoclonal paraprotein, immunoglobulin G lambda 3.7 g/L. Bone marrow biopsy and aspirate revealed only a mild plasmacytosis (5% to 10%. Echocardiogram and skeletal survey were normal. He had mild proteinuria. Complete blood count, C-reactive protein, calcium, albumin and total protein were normal. No specific therapy was instituted. In January of 1998 the patient remained asymptomatic with no gastrointestinal, cardiovascular or constitutional symptoms. He had developed nephrotic range proteinuria (3.95 g/24 h, microalbuminuria, hypoalbuminemia and a renal biopsy consistent with renal amyloidosis. In 1999 there was an increase in the monoclonal paraprotein (6.2 g/L. The remaining investigations were normal except for an echocardiogram which showed left ventricular hypertrophy but a normal

  11. Clinical applications of continuous infusion chemotherapy ahd concomitant radiation therapy

    International Nuclear Information System (INIS)

    Rosenthal, C.J.; Rotman, M.

    1986-01-01

    This book presents information on the following topics: theoretical basis and clinical applications of 5-FU as a radiosensitizer; treatment of hepatic metastases from gastro intestingal primaries with split course radiation therapy; combined modality therapy with 5-FU, Mitomycin-C and radiation therapy for sqamous cell cancers; treatment of bladder carcinoma with concomitant infusion chemotherapy and irradiation; a treatment of invasiv bladder cancer by the XRT/5FU protocol; concomitant radiation therapy and doxorubicin by continuous infusion in advanced malignancies; cis platin by continuous infusion with concurrent radiation therapy in malignant tumors; combination of radiation with concomitant continuous adriamycin infusion in a patient with partially excised pleomorphic soft tissue sarcoma of the lower extremeity; treatment of recurrent carcinoma of the paranasal sinuses using concomitant infusion cis-platinum and radiation therapy; hepatic artery infusion for hepatic metastases in combination with hepatic resection and hepatic radiation; study of simultaneous radiation therapy, continuous infusion, 5FU and bolus mitomycin-C; cancer of the esophagus; continuous infusion VP-16, bolus cis-platinum and simultaneous radiation therapy as salvage therapy in small cell bronchogenic carcinoma; and concomitant radiation, mitomycin-C and 5-FU infusion in gastro intestinal cancer

  12. Pulsatile versus steady infusions for hepatic artery chemotherapy

    International Nuclear Information System (INIS)

    Kim, E.E.; Haynie, T.P.; Wright, K.C.; Chaynsangavej, C.; Gianturco, C.; Lamki, L.; Wallace, S.

    1984-01-01

    Hepatic artery chemotherapy for unresectable liver tumors requires an even distribution of the drugs in the tumor or vascular bed. This cannot be determined angiographically because the drugs are infused at a much lower rate than the contrast media. It is easy, however, to determine the quality of the perfusion by injecting a small volume of Tc-99m MAA in one of the side ports while chemotherapeutic agent is being infused at the same rate. Usually this shows a uniform, satisfactory distribution of isotope. Occasionally, however, some areas fail to receive Tc-99m in spite of what appears to be a good position of the catheter tip. Since ''streaming'' of the infused drugs has been blamed for their uneven distribution, the authors decided to compare the usual steady flow infusions with infusions made pulsatile by the addition of a pulsing device (Gianturco Pump) attached to the infusion tubing. Eighty-three patients were studied with steady as well as pulsatile infusions. In 16 of these patients the perfusion pattern was definitely changed by the pulsatile infusion. In one patient the pulsatile mode resulted in an unwanted gastric perfusion. In 5 patients the distribution was improved in one hepatic lobe and in 10 patients it was improved in both lobes. These results show that hepatic artery perfusions can occasionally be improved by pulsing the infusate. However, pulsing can produce the unwanted perfusion of extra-hepatic areas

  13. Swelling and infusion of tea in tea bags.

    Science.gov (United States)

    Yadav, Geeta U; Joshi, Bhushan S; Patwardhan, Ashwin W; Singh, Gurmeet

    2017-07-01

    The present study deals with swelling and infusion kinetics of tea granules in tea bags. The swelling and infusion kinetics of tea bags differing in tea loading and tea bag shapes were compared with loose tea. Increment in temperature and dipping frequency of tea bag in hot water increased the infusion kinetics of tea bags. Reduction in particle size enhanced the swelling and infusion kinetics of tea in a tea bag. The effects of tea particle size, tea bag dipping rate, loading of tea granules in tea bag and tea bag shapes on infusion kinetics were investigated. Increase in tea loading in tea bags resulted in reduced infusion kinetics. Double chambered tea bag showed the highest swelling (30%) and infusion kinetics (8.30% Gallic acid equivalence) while single chambered tea bags showed the lowest kinetics, amongst the various bags studied. The swelling and infusion kinetics of loose tea was always faster and higher than that of tea bags. It was found that overall effect of percentage filling of tea granules and height of tea bed in a tea bag affects tea infusion kinetics the most. Weibull model was found to be in good agreement with the swelling data.

  14. Determination of 24-hour insulin infusion pattern by an artificial endocrine pancreas for intravenous insulin infusion with a miniature pump

    DEFF Research Database (Denmark)

    Kølendorf, K; Christiansen, J S; Bojsen, J

    1981-01-01

    UNLABELLED: Intravenous insulin infusion with a glucose controlled insulin infusion system (GCIIS) is known to restore glucose homeostasis. A simpler approach to improve blood glucose regulation is preprogrammed intravenous insulin infusion with portable pumps without sensor-mediated feedback. We...... report a study designed to evaluate whether the preprogrammed insulin infusion pattern to be used in the miniature insulin infusion pump (MIIP) could be optimized by concomitant employment of the GCIIS for blood glucose control. Six juvenile-onset insulin-dependent diabetics (mean age 31 yrs) were...... studied. Mean blood glucose (MBG) was 6.2 mmol/l +/- 0.5 (SD) during glucose controlled infusion and 5.3 +/- 0.6 during the combined MIIP + GCIIS-day. The insulin requirements calculated from the s.c. regimen (56 U +/- 10 SD) were identical to the GCIIS-measured (51 U +/- 14) and to the amounts delivered...

  15. Assessment of implantable infusion pumps for continuous infusion of human insulin in rats: potential for group housing

    DEFF Research Database (Denmark)

    Jensen, Vivi Flou Hjorth; Molck, Anne-Marie; Martensson, Martin

    2017-01-01

    compound in these studies, and a comparator model of persistent exposure by HI infusion from external pumps has recently been developed to support toxicological evaluation of long-acting insulin analogues. However, this model requires single housing of the animals. Developing an insulin-infusion model...... which allows group housing would therefore greatly improve animal welfare. The aim of the present study was to investigate the suitability of implantable infusion pumps for HI infusion in group-housed rats. Group housing of rats implanted with a battery-driven pump proved to be possible. Intravenous...... infusion of HI lowered blood glucose levels persistently for two weeks, providing a comparator model for use in two-week repeated-dose toxicity studies with new long-acting insulin analogues, which allows group housing, and thereby increasing animal welfare compared with an external infusion model....

  16. Method of producing zeolite encapsulated nanoparticles

    DEFF Research Database (Denmark)

    2015-01-01

    The invention therefore relates to a method for producing zeolite, zeolite-like or zeotype encapsulated metal nanoparticles, the method comprises the steps of: 1) Adding one or more metal precursors to a silica or alumina source; 2) Reducing the one or more metal precursors to form metal...... nanoparticles on the surface of the silica or alumina source; 3) Passing a gaseous hydrocarbon, alkyl alcohol or alkyl ether over the silica or alumina supported metal nanoparticles to form a carbon template coated zeolite, zeolite-like or zeotype precursor composition; 4a) Adding a structure directing agent...... to the carbon template coated zeolite, zeolite-like or zeotype precursor composition thereby creating a zeolite, zeolite-like or zeotype gel composition; 4b) Crystallising the zeolite, zeolite-like or zeotype gel composition by subjecting said composition to a hydrothermal treatment; 5) Removing the carbon...

  17. Leaching behavior of polyethylene encapsulated nitrate waste

    International Nuclear Information System (INIS)

    Fuhrmann, M.; Kalb, P.D.

    1996-01-01

    The leaching behavior of sodium nitrate salts (simulating wastes from the Hanford single-shell tanks) encapsulated in polyethylene was investigated. These wastes are sufficiently radioactive that they may be self-heating. Laboratory scale waste forms prepared for leach tests were mixtures of NaNO 3 and low-density polyethylene, with nominal salt loadings of 50, 60 and 70 wt%. In this study the authors determined: (1) leach rates of NaNO 3 /polyethylene waste forms at several waste loadings; (2) leach rates at temperatures as high as 70 C which is the maximum projected temperature of this self-heating waste; and (3) leaching mechanism of NaNO 3 /polyethylene waste forms and predicted releases. The Accelerated Leach Test (ALT) used for this study was recently developed at Brookhaven National Laboratory (BNL). It is particularly well suited for this application since it was designed to be run at elevated temperatures

  18. Encapsulated liquid sorbents for carbon dioxide capture.

    Science.gov (United States)

    Vericella, John J; Baker, Sarah E; Stolaroff, Joshuah K; Duoss, Eric B; Hardin, James O; Lewicki, James; Glogowski, Elizabeth; Floyd, William C; Valdez, Carlos A; Smith, William L; Satcher, Joe H; Bourcier, William L; Spadaccini, Christopher M; Lewis, Jennifer A; Aines, Roger D

    2015-02-05

    Drawbacks of current carbon dioxide capture methods include corrosivity, evaporative losses and fouling. Separating the capture solvent from infrastructure and effluent gases via microencapsulation provides possible solutions to these issues. Here we report carbon capture materials that may enable low-cost and energy-efficient capture of carbon dioxide from flue gas. Polymer microcapsules composed of liquid carbonate cores and highly permeable silicone shells are produced by microfluidic assembly. This motif couples the capacity and selectivity of liquid sorbents with high surface area to facilitate rapid and controlled carbon dioxide uptake and release over repeated cycles. While mass transport across the capsule shell is slightly lower relative to neat liquid sorbents, the surface area enhancement gained via encapsulation provides an order-of-magnitude increase in carbon dioxide absorption rates for a given sorbent mass. The microcapsules are stable under typical industrial operating conditions and may be used in supported packing and fluidized beds for large-scale carbon capture.

  19. Encapsulating Urban Traffic Rhythms into Road Networks

    Science.gov (United States)

    Wang, Junjie; Wei, Dong; He, Kun; Gong, Hang; Wang, Pu

    2014-01-01

    Using road GIS (geographical information systems) data and travel demand data for two U.S. urban areas, the dynamical driver sources of each road segment were located. A method to target road clusters closely related to urban traffic congestion was then developed to improve road network efficiency. The targeted road clusters show different spatial distributions at different times of a day, indicating that our method can encapsulate dynamical travel demand information into the road networks. As a proof of concept, when we lowered the speed limit or increased the capacity of road segments in the targeted road clusters, we found that both the number of congested roads and extra travel time were effectively reduced. In addition, the proposed modeling framework provided new insights on the optimization of transport efficiency in any infrastructure network with a specific supply and demand distribution. PMID:24553203

  20. Encapsulated magnetite particles for biomedical application

    CERN Document Server

    Landfester, K

    2003-01-01

    The process of miniemulsification allows the generation of small, homogeneous, and stable droplets containing monomer or polymer precursors and magnetite which are then transferred by polymer reactions to the final polymer latexes, keeping their particular identity without serious exchange kinetics involved. It is shown that the miniemulsion process can excellently be used for the formulation of polymer-coated magnetic nanoparticles which can further be used for biomedical applications. The use of high shear, appropriate surfactants, and the addition of a hydrophobe in order to suppress the influence of Ostwald ripening are key factors for the formation of the small and stable droplets in miniemulsion and will be discussed. Two different approaches based on miniemulsion processes for the encapsulation of magnetite into polymer particles will be presented in detail.

  1. Materials Testing for PV Module Encapsulation

    Energy Technology Data Exchange (ETDEWEB)

    Jorgensen, G.; Terwilliger, K.; Glick, S.; Pern, J.; McMahon, T.

    2003-05-01

    Important physical properties of materials used in PV module packaging are presented. High-moisture-barrier, high-resistivity, adhesion-promoting coatings on polyethyl-ene terephthalate (PET) films have been fabricated and characterized for use in PV module application and com-pared to standard polymer backsheet materials. Ethylene vinyl acetate (EVA) and an encapsulant replacement for EVA are studied for their water vapor transmission rate (WVTR) and adhesion properties. WVTR, at test conditions up to 85C/100% relative humidity (RH), and adhesion val-ues are measured before and after filtered xenon arc lamp ultraviolet (UV) exposure and damp heat exposure at 85C/85% RH. Water ingress is quantified by weight gain and embedded humidity sensors.

  2. Encapsulation and Nano-Encapsulation of Papain Active Sites to Enhance Radiolityc Stability and Decrease Toxicity

    International Nuclear Information System (INIS)

    Lugão, A.B.; Varca, G.H.C.; Mathor, M.B.; Santos Lopes, P.; Rogero, M.S.S.; Rogero, J.R.

    2010-01-01

    Papain is used as an ingredient in various enzymatic debridement preparations. Those paste-like preparations are based on water solution and usually are sterilized by radiation. As a consequence, there is a major decrease in papain activity. Papain containing preparations are used in chronic wounds treatment in order to clean and remove the necrotic tissue. However FDA (2008) is taking an action against such products due to severe adverse events reported in patients submitted to papain treatments. Thus, the main goal of this proposal is to develop encapsulated papain containing membranes based on hydrogels and silicone rubber in an attempt to achieve a controllable distribution of size and delivery profile, a toxicity reduction and provide stability towards radiation processing through molecular encapsulation with β-cyclodextrin, which may also provide protection to the enzyme against radiation induced radiolysis. (author)

  3. PROGRESS IN CLINICAL ENCAPSULATED ISLET XENOTRANSPLANTATION

    Science.gov (United States)

    Cooper, David K.C.; Matsumoto, Shinichi; Abalovich, Adrian; Itoh, Takeshi; Mourad, Nizar I.; Gianello, Pierre R; Wolf, Eckhard; Cozzi, Emanuele

    2016-01-01

    At the 2015 combined congress of the CTS, IPITA, and IXA, a symposium was held to discuss recent progress in pig islet xenotransplantation. The presentations focused on 5 major topics – (i) the results of 2 recent clinical trials of encapsulated pig islet transplantation, (ii) the inflammatory response to encapsulated pig islets, (iii) methods to improve the secretion of insulin by pig islets, (iv) genetic modifications to the islet-source pigs aimed to protect the islets from the primate immune and/or inflammatory responses, and (v) regulatory aspects of clinical pig islet xenotransplantation. Trials of microencapsulated porcine islet transplantation to treat unstable type 1 diabetic patients have been associated with encouraging preliminary results. Further advances to improve efficacy may include (i) transplantation into a site other than the peritoneal cavity, which might result in better access to blood, oxygen, and nutrients; (ii) the development of a more biocompatible capsule and/or the minimization of a foreign body reaction; (iii) pig genetic modification to induce a greater secretion of insulin by the islets, and/or to reduce the immune response to islets released from damaged capsules; and (iv) reduction of the inflammatory response to the capsules/islets by improvements in the structure of the capsules and/or in genetic-engineering of the pigs and/or in some form of drug therapy. Ethical and regulatory frameworks for islet xenotransplantation are already available in several countries, and there is now a wider international perception of the importance of developing an internationally-harmonized ethical and regulatory framework. PMID:27482959

  4. Ketamine Infusions for Treatment Refractory Headache.

    Science.gov (United States)

    Pomeroy, Jared L; Marmura, Michael J; Nahas, Stephanie J; Viscusi, Eugene R

    2017-02-01

    Management of chronic migraine (CM) or new daily persistent headache (NDPH) in those who require aggressive outpatient and inpatient treatment is challenging. Ketamine has been suggested as a new treatment for this intractable population. This is a retrospective review of 77 patients who underwent administration of intravenous, subanesthetic ketamine for CM or NDPH. All patients had previously failed aggressive outpatient and inpatient treatments. Records were reviewed for patients treated between January 2006 and December 2014. The mean headache pain rating using a 0-10 pain scale was an average of 7.1 at admission and 3.8 on discharge (P ketamine well. A number of adverse events were observed, but very few were serious. Subanesthetic ketamine infusions may be beneficial in individuals with CM or NDPH who have failed other aggressive treatments. Controlled trials may confirm this, and further studies may be useful in elucidating more robust benefit in a less refractory patient population. © 2016 American Headache Society.

  5. The half-life of infusion fluids

    Science.gov (United States)

    Hahn, Robert G.; Lyons, Gordon

    2016-01-01

    An understanding of the half-life (T1/2) of infused fluids can help prevent iatrogenic problems such as volume overload and postoperative interstitial oedema. Simulations show that a prolongation of the T1/2 for crystalloid fluid increases the plasma volume and promotes accumulation of fluid in the interstitial fluid space. The T1/2 for crystalloids is usually 20 to 40 min in conscious humans but might extend to 80 min or longer in the presence of preoperative stress, dehydration, blood loss of The longest T1/2 measured amounts to between 3 and 8 h and occurs during surgery and general anaesthesia with mechanical ventilation. This situation lasts as long as the anaesthesia. The mechanisms for the long T1/2 are only partly understood, but involve adrenergic receptors and increased renin and aldosterone release. In contrast, the T1/2 during the postoperative period is usually short, about 15 to 20 min, at least in response to new fluid. The commonly used colloid fluids have an intravascular persistence T1/2 of 2 to 3 h, which is shortened by inflammation. The fact that the elimination T1/2 of the infused macromolecules is 2 to 6 times longer shows that they also reside outside the bloodstream. With a colloid, fluid volume is eliminated in line with its intravascular persistence, but there is insufficient data to know if this is the same in the clinical setting. PMID:27058509

  6. 21 CFR 870.1800 - Withdrawal-infusion pump.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Withdrawal-infusion pump. 870.1800 Section 870.1800 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED... pump. (a) Identification. A withdrawal-infusion pump is a device designed to inject accurately drugs...

  7. Effect of serotonin infusions on the mean plasma concentrations of ...

    African Journals Online (AJOL)

    Milk samples were assayed for protein, fat and lactose constituents. The daily amounts of milk were determined throughout the experiment. Infusions of 1 ng 5HT did not change the plasma concentrations of the T3, T4 and GH throughout the experiment period. Infusions of 4 and 8 ng 5HT significantly (p<0.01) increased the ...

  8. 21 CFR 526.88 - Amoxicillin trihydrate for intramammary infusion.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Amoxicillin trihydrate for intramammary infusion... Amoxicillin trihydrate for intramammary infusion. (a) Specifications. Each single dose syringe contains amoxicillin trihydrate equivalent to 62.5 milligrams of amoxicillin. (b) Sponsor. See No. 000061 in § 510.600...

  9. Effect of perioperative insulin infusion on surgical morbidity and mortality

    DEFF Research Database (Denmark)

    Gandhi, Gunjan Y; Murad, M Hassan; Flynn, Errol David

    2008-01-01

    To conduct a systematic review and meta-analysis of randomized controlled trials (RCTs) to evaluate the effect of perioperative insulin infusion on outcomes important to patients.......To conduct a systematic review and meta-analysis of randomized controlled trials (RCTs) to evaluate the effect of perioperative insulin infusion on outcomes important to patients....

  10. Perisciatic infusion of ropivacaine and analgesia after hallux valgus repair

    DEFF Research Database (Denmark)

    Zaric, D; Jørgensen, B G; Laigaard, F

    2010-01-01

    Moderate to severe pain after hallux valgus repair can be successfully treated with a continuous popliteal sciatic nerve block in ambulatory patients. Different anesthesiologists use various infusion rates for this purpose. The aim of this study was to compare the analgesic efficacy of two infusion...

  11. Haemolytic anaemia as a complication to intravenous immunoglobulin infusion

    DEFF Research Database (Denmark)

    Markvardsen, Lars Høj; Harbo, Thomas; Christiansen, Ingelise

    performed before and two weeks after infusion of IVIg. Following treatment blood haemoglobin declined from 8.6±0.8 to 8.1±1.3mmol/l, p... naive patients are susceptible to develop haemolysis. Haemolytic anaemia is a severe side effect that seems to be more frequent after immunoglobulin infusions than previously recognized....

  12. Differential effects of insulin injections and insulin infusions on levels ...

    African Journals Online (AJOL)

    Studies have shown that while injections of insulin cause an increase in fat mass, infusions of insulin increase fat mass. The aim of this paper was to test the hypothesis that if an increase in glycogen is an indicator of an impending increase in adipose mass, then insulin infusions should not increase glycogen, while insulin ...

  13. Inhibition of endogenous lactate turnover with lactate infusion in humans

    International Nuclear Information System (INIS)

    Searle, G.L.; Feingold, K.R.; Hsu, F.S.; Clark, O.H.; Gertz, E.W.; Stanley, W.C.

    1989-01-01

    The extent to which lactate infusion may inhibit endogenous lactate production, though previously considered, has never been critically assessed. To examine this proposition, single injection tracer methodology (U- 14 C Lactate) has been used for the estimation of lactate kinetics in 12 human subjects under basal conditions and with the infusion of sodium lactate. The basal rate of lactate turnover was measured on a day before the study with lactate infusion, and averaged 63.7 + 5.5 mg/kg/h. Six of these individuals received a stable lactate infusion at an approximate rate of 160 mg/kg/h, while the remaining six individuals were infused at the approximate rate of 100 mg/kg/h. It has been found that stable lactate infused at rates approximating 160 mg/kg/h consistently produced a complete inhibition of endogenous lactate production. Infusion of lactate at 100 mg/kg/h caused a lesser and more variable inhibition of endogenous lactate production (12% to 64%). In conclusion, lactate infusion significantly inhibits endogenous lactate production

  14. Standard concentration infusions in paediatric intensive care: the clinical approach.

    Science.gov (United States)

    Perkins, Joanne; Aguado-Lorenzo, Virginia; Arenas-Lopez, Sara

    2017-05-01

    The use of standard concentrations of intravenous infusions has been advocated by international organisations to increase intravenous medication safety in paediatric and neonatal critical care. However, there is no guidance on how to identify and implement these infusions leading to great interunit variability. To identify the most appropriate clinical concentrations required by our paediatric intensive care unit (PICU) population with regard to accuracy of delivery and overall fluid allowance. Firstly a matrix was used to balance the concentration, dose and infusion volume (weight range 1.5-50 kg). Results were further refined considering: patient fluid allowance based on fluid volume targets, infusion pump accuracy and challenging each infusion against clinical scenarios requiring administration of multiple drug infusions found in PICU. Consideration was given to the standard concentrations routinely used in adults, in order to assess whether alignment with paediatrics was possible for some of the concentrations proposed. Finally a risk assessment of the infusions was conducted using the NPSA 20 tool. Twenty-five drugs identified as the most commonly used intravenous infusions in the unit. For the majority of the medicines, three weight bands of standard concentrations were necessary to cover the children's weight ranges and kept within predefined fluid requirements and accuracy of delivery. This work shows a patient focused systematic approach for defining and evaluating standardised concentrations in intensive care children. © 2016 Royal Pharmaceutical Society.

  15. ArtsIN: Arts Integration and Infusion Framework

    Science.gov (United States)

    Hartle, Lynn C.; Pinciotti, Patricia; Gorton, Rebecca L.

    2015-01-01

    Teaching to meet the diverse learning needs of twenty-first century, global learners can be challenging, yet a growing body of research points to the proved successes of arts-infused and integrated curricula, especially for building capacity for learning and motivation. This article presents the ArtsIN: Arts Integration and Infusion framework, a…

  16. Relationship between encapsulation barrier performance and organic solar cell lifetime

    Science.gov (United States)

    Cros, Stéphane; Guillerez, Stéphane; de Bettignies, Rémi; Lemaître, Noëlla; Bailly, Severine; Maisse, Pascal

    2008-08-01

    This article describes a method to have a better knowledge of barrier performances needed for encapsulating materials, particularly in the case of organic solar cells devices. We have developed a high sensitivity permeameter which enables simultaneous measurements of water and oxygen permeation. Various polymers and inorganic coatings on polymer substrates have been measured. Experimental barrier parameters have been plotted considering the steady and transient states of permeation curves and compared to theoretical values. In addition, we have performed ageing experiments on encapsulated organic solar cells to establish a barrier requirement directly related to the device. Finally, we have performed such experiments using different cathode materials and encapsulating materials.

  17. Early mechanism of action of arterially infused ethanol: an experimental study on the influence of infusion speed

    International Nuclear Information System (INIS)

    Han, Joon Koo

    1988-01-01

    Abdominal aortography and histopathologic examination after absolute ethanol infusion at fast (0.4cc/sec) and slow speed (0.04cc/sec) were performed on 16 rats (2 controls. 7 fast infusion group. 7 slow infusion group). Angiographic and histopathologic findings were correlated and the findings of slow and fast infusion groups were studied. The results are as follows: 1. Histopathologic findings of the fast infusion group revealed wide area of glomerular and tubular collapses, obliteration of the free space between the Bowmann's capsule and glomerulus, sloughing and loss of the endothelium, fresh thrombi attached to the wall, and cleavage of the muscle layer of the arteries. 2. Angiographic findings of the fast infusion group revealed luminal irregularity, early obstruction of the aorta and the renal arteries, and delayed circulation time. 3. Histopathologic findings of the slow infusion group revealed degenerated, coalesced red blood cell packed in the glomeruli, focal areas of severe glomerular and tubular damage on relatively normal background, endothelial and muscular damage of the arteries. 4. Angiographic findings of the slow infusion group revealed focal perfusion defect of the kidney, delayed circulation time, and mild luminal irregularity, but there was no obstruction of the major arteries. 5. In conclusion, author believes that endothelial damage and thrombus formation from the damaged vessel wall, as well as direct cytotoxicity and in situ emboli formation play a significant role in the embolic effect of absolute ethanol.

  18. Plastic encapsulated, dye sensitised photovoltaic cells

    Energy Technology Data Exchange (ETDEWEB)

    Potter, R.J.; Otley, L.C.; Durrant, J.R.; Haque, S.; Xu, C. [Imperial College of Science, Technology and Medicine, London (United Kingdom); Holmes, A.B.; Park, T.; Schulte, N. [Cambridge Univ. (United Kingdom)

    2004-07-01

    The report presents the results of a collaborative project that aimed to demonstrate the technical feasibility of a plastic-encapsulated, solid state, dye-sensitised solar cell (DSSC) with an energy conversion efficiency (ECE) of at least 3%. DSSCs offer a possible 'step change' in photovoltaic technology resulting in lower costs compared with existing technologies. The project involved a series of eight main tasks: the development of first and second generation HTM electrolytes; the development of polymer-supported electrolytes; the development of low temperature electrode coating procedures; dye development; cell assembly and testing; component integration; and overall process development. A wide range of innovative HTMs have been synthesised, including materials incorporating both hole-transporting and ion-chelating functional groups. The ruthenium-based dye, N3, remained the preferred sensitising component. The project has produced a system that can routinely achieve over 5% ECE at 0.1 Sun illumination on 1 cm{sup 2} cells using polymer-supported electrolytes.

  19. Modeling Encapsulated Microbubble Dynamics at High Pressure Amplitudes

    Science.gov (United States)

    Heyse, Jan F.; Bose, Sanjeeb; Iaccarino, Gianluca

    2017-11-01

    Encapsulated microbubbles are commonly used in ultrasound contrast imaging and are of growing interest in therapeutic applications where local cavitation creates temporary perforations in cell membranes allowing for enhanced drug delivery. Clinically used microbubbles are encapsulated by a shell commonly consisting of protein, polymer, or phospholipid; the response of these bubbles to externally imposed ultrasound waves is sensitive to the compressibility of the encapsulating shell. Existing models approximate the shell compressibility via an effective surface tension (Marmottant et al. 2005). We present simulations of microbubbles subjected to high amplitude ultrasound waves (on the order of 106 Pa) and compare the results with the experimental measurements of Helfield et al. (2016). Analysis of critical points (corresponding to maximum and minimum expansion) in the governing Rayleigh-Plesset equation is used to make estimates of the parameters used to characterize the effective surface tension of the encapsulating shell. Stanford Graduate Fellowship.

  20. Encapsulating peritoneal sclerosis: experience of a tertiary referral center.

    LENUS (Irish Health Repository)

    Phelan, P J

    2010-05-01

    Encapsulating peritoneal sclerosis (EPS) is arguably the most serious complication of chronic peritoneal dialysis (PD) therapy with extremely high mortality rates. We aimed to establish the rates of EPS and factors associated with its development in a single center.

  1. K Basins fuel encapsulation and storage hazard categorization

    International Nuclear Information System (INIS)

    Porten, D.R.

    1994-12-01

    This document establishes the initial hazard categorization for K-Basin fuel encapsulation and storage in the 100 K Area of the Hanford site. The Hazard Categorization for K-Basins addresses the potential for release of radioactive and non-radioactive hazardous material located in the K-Basins and their supporting facilities. The Hazard Categorization covers the hazards associated with normal K-Basin fuel storage and handling operations, fuel encapsulation, sludge encapsulation, and canister clean-up and disposal. The criteria categorizes a facility based on total curies per radionuclide located in the facility. Tables 5-3 and 5-4 display the results in section 5.0. In accordance with DOE-STD-1027 and the analysis provided in section 5.0, the K East Basin fuel encapsulation and storage activity and the K West Basin storage are classified as a open-quotes Category 2close quotes Facility

  2. Performance of Deacetyled Glucomannan as Iron Encapsulation Excipient

    Directory of Open Access Journals (Sweden)

    Wardhani Dyah H.

    2018-01-01

    Full Text Available Encapsulation protects iron from degradation or oxidation possibilities due to its encapsulation material. Glucomannan (GM is a neutral polysaccharide consist of D-mannose and D-glucose connected with β-1,4 linkage. Deactylation transforms solubility of glucomannan as well as its gel structure. These properties support for excipient application. The aim of this work was to determine performance of deacetylated glucomannan as iron matrix. Deacetylation was conducted heterogeneously. Deacetylation did not change the backbone of GM. Higher alkali concentration has better ability to encapsulate iron. Extended deacetylation time and alkali concentration affect insignificantly on the performance of encapsulation to protect iron from oxidation. The release of iron from the matrix influences by deacetylation degree.

  3. Can uranyl complexes encapsulate to carbon nanotubes? A ...

    Indian Academy of Sciences (India)

    K SRINIVASU

    novel nanomaterials for nuclear waste management processes. Keywords. Carbon nanotubes; density functional theory; uranyl encapsulation; uranyl functionalization. 1. Introduction. Presently, the energy demands are exponentially increas- ing, thus alternative energy resources such as nuclear energy are unavoidable ...

  4. Encapsulating probiotics with an interpolymer complex in supercritical carbon dioxide

    CSIR Research Space (South Africa)

    Moolman, FS

    2006-01-01

    Full Text Available Traditional encapsulation methods in fortified foods and drug delivery applications present difficulties for ‘actives’, such as probiotics, sensitive to exposure to water, solvents, heat or oxygen, where ‘active’ refers to a material, chemical...

  5. A quantitative method for photovoltaic encapsulation system optimization

    Science.gov (United States)

    Garcia, A., III; Minning, C. P.; Cuddihy, E. F.

    1981-01-01

    It is pointed out that the design of encapsulation systems for flat plate photovoltaic modules requires the fulfillment of conflicting design requirements. An investigation was conducted with the objective to find an approach which will make it possible to determine a system with optimum characteristics. The results of the thermal, optical, structural, and electrical isolation analyses performed in the investigation indicate the major factors in the design of terrestrial photovoltaic modules. For defect-free materials, minimum encapsulation thicknesses are determined primarily by structural considerations. Cell temperature is not strongly affected by encapsulant thickness or thermal conductivity. The emissivity of module surfaces exerts a significant influence on cell temperature. Encapsulants should be elastomeric, and ribs are required on substrate modules. Aluminum is unsuitable as a substrate material. Antireflection coating is required on cell surfaces.

  6. Methodology for Evaluating Encapsulated Beneficial Uses of Coal Combustion Residuals

    Science.gov (United States)

    The primary purpose of this document is to present an evaluation methodology developed by the EPA for making determinations about environmental releases from encapsulated products containing coal combustion residuals.

  7. The improved stability of enzyme encapsulated in biomimetic titania particles

    International Nuclear Information System (INIS)

    Jiang Yanjun; Sun Qianyun; Jiang Zhongyi; Zhang Lei; Li Jian; Li Lin; Sun Xiaohui

    2009-01-01

    This study demonstrates a novel biomimetic approach for the entrapment of yeast alcohol dehydrogenase (YADH) within titania nanoparticles to improve its stability. Protamine was as the template and catalyst for the condensation of titanium (IV) bis(ammonium lactato) dihydroxide (Ti-BALDH) into titania nanoparticles in which YADH was trapped. The as-prepared titania/protamine/YADH composites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), dynamic light scattering (DLS), X-ray powder diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The mechanism of YADH encapsulation was tentatively proposed from a series of experimental results. The preliminary investigation showed that encapsulated YADH could retain most of its initial activity. Compared to free YADH, encapsulated YADH exhibited significantly improved thermal, pH and recycling stability. After 5 weeks storage, no substantial loss of catalytic activity for encapsulated YADH was observed

  8. Waste encapsulation and storage facility function analysis report

    International Nuclear Information System (INIS)

    Lund, D.P.

    1995-09-01

    The document contains the functions, function definitions, function interfaces, function interface definitions, Input Computer Automated Manufacturing Definition (IDEFO) diagrams, and a function hierarchy chart that describe what needs to be performed to deactivate Waste Encapsulation and Storage Facility (WESF)

  9. Accelerated UV Test Methods for Encapsulants of Photovoltaic Modules: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Kempe, M. D.

    2008-05-01

    This paper asserts that materials used for PV encapsulation must be evaluated for their ability to transmit light and to maintain mechanical integrity for extended periods of time under long term UV exposure.

  10. Net Shape Rapid Manufacturing Using Nano Encapsulated Powders, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — This Phase II program is developing NET Shape components from Encapsulated Powders. Significant advances in Phase I for various materials and in net shape processing...

  11. Electrospun Phospholipid Fibers as Micro-Encapsulation and Antioxidant Matrices.

    Science.gov (United States)

    Shekarforoush, Elhamalsadat; Mendes, Ana C; Baj, Vanessa; Beeren, Sophie R; Chronakis, Ioannis S

    2017-10-17

    Electrospun phospholipid (asolectin) microfibers were investigated as antioxidants and encapsulation matrices for curcumin and vanillin. These phospholipid microfibers exhibited antioxidant properties which increased after the encapsulation of both curcumin and vanillin. The total antioxidant capacity (TAC) and the total phenolic content (TPC) of curcumin/phospholipid and vanillin/phospholipid microfibers remained stable over time at different temperatures (refrigerated, ambient) and pressures (vacuum, ambient). ¹H-NMR confirmed the chemical stability of both encapsulated curcumin and vanillin within phospholipid fibers. Release studies in aqueous media revealed that the phenolic bioactives were released mainly due to swelling of the phospholipid fiber matrix over time. The above studies confirm the efficacy of electrospun phospholipid microfibers as encapsulation and antioxidant systems.

  12. Electrospun Phospholipid Fibers as Micro-Encapsulation and Antioxidant Matrices

    Directory of Open Access Journals (Sweden)

    Elhamalsadat Shekarforoush

    2017-10-01

    Full Text Available Electrospun phospholipid (asolectin microfibers were investigated as antioxidants and encapsulation matrices for curcumin and vanillin. These phospholipid microfibers exhibited antioxidant properties which increased after the encapsulation of both curcumin and vanillin. The total antioxidant capacity (TAC and the total phenolic content (TPC of curcumin/phospholipid and vanillin/phospholipid microfibers remained stable over time at different temperatures (refrigerated, ambient and pressures (vacuum, ambient. 1H-NMR confirmed the chemical stability of both encapsulated curcumin and vanillin within phospholipid fibers. Release studies in aqueous media revealed that the phenolic bioactives were released mainly due to swelling of the phospholipid fiber matrix over time. The above studies confirm the efficacy of electrospun phospholipid microfibers as encapsulation and antioxidant systems.

  13. Introducing lattice strain to graphene encapsulated in hBN

    Science.gov (United States)

    Tomori, Hikari; Hiraide, Rineka; Ootuka, Youiti; Watanabe, Kenji; Taniguchi, Takashi; Kanda, Akinobu

    Due to the characteristic lattice structure, lattice strain in graphene produces an effective gauge field. Theories tell that by controlling spatial variation of lattice strain, one can tailor the electronic state and transport properties of graphene. For example, under uniaxial local strain, graphene exhibits a transport gap at low energies, which is attractive for a graphene application to field effect devices. Here, we develop a method for encapsulating a strained graphene film in hexagonal boron-nitride (hBN). It is known that the graphene carrier mobility is significantly improved by the encapsulation of graphene in hBN, which has never been applied to strained graphene. We encapsulate graphene in hBN using the van der Waals assembly method. Strain is induced by sandwiching a graphene film between patterned hBN sheets. Spatial variation of strain is confirmed with micro Raman spectroscopy. Transport measurement of encapsulated strained graphene is in progress.

  14. Advancing medication infusion safety through the clinical integration of technology.

    Science.gov (United States)

    Gerhart, Donald; O'Shea, Kristen; Muller, Sharon

    2013-01-01

    Adverse drug events resulting from errors in prescribing or administering medications are preventable. Within a hospital system, numerous technologies are employed to address the common sources of medication error, including the use of electronic medical records, physician order entry, smart infusion pumps, and barcode medication administration systems. Infusion safety is inherently risky because of the high-risk medications administered and the lack of integration among the stand-alone systems in most institutions. Intravenous clinical integration (IVCI) is a technology that connects electronic medical records, physician order entry, smart infusion pumps, and barcode medication administration systems. It combines the safety features of an automatically programmed infusion pump (drug, concentration, infusion rate, and patient weight, all auto-programmed into the device) with software that provides visibility to real-time clinical infusion data. Our article describes the characteristics of IVCI at WellSpan Health and its impact on patient safety. The integrated infusion system has the capability of reducing medication errors, improving patient care, reducing in-facility costs, and supporting asset management. It can enhance continuous quality improvement efforts and efficiency of clinical work flow. After implementing IVCI, the institution realized a safer patient environment and a more streamlined work flow for pharmacy and nursing.

  15. Intraarterial infusion chemotherapy for the treatment of metastatic liver cancer

    International Nuclear Information System (INIS)

    Arai, Yasuaki; Kido, Choichiro

    1987-01-01

    Some techniques of the most recent interventional radiology are very useful for the treatment of metastatic liver cancer and changing the style of hepatic infusion chemotherapy. This report shows our latest results and methods of hepatic infusion chemotherapy for metastatic liver cancer. 1. For the catheter placement, a new catheterization route via the left subclavian artery into the hepatic artery was developed and performed in 132 cases. Superselective catheterization succeeded in 123 cases (93.2 %). This procedure is less invasive than laparotomy and less troublesome than other percutaneous routes. 2. For useful infusion system, an implantable injection port ''Reservoir'' was developed and it was used in 87 cases. This method makes arterial infusion chemotherapy easy, and imploves their quality of life. 3. To acquire adequate drug delivery, arterial redistribution by steel coils was done, and 109 arteries in 80 cases were occluded. This method is very useful to make multiple hepatic artery single and it is important to avoid gasroduodenal complications. 4. Now, using these techniques, the phase II study of 5FU, ADM, MMC combined hepatic infusion in patients with non-resectable metastatic liver cancer is done. Up to this time, such a phase study on arterial infusion chemotherapy was difficult because of technical problems, but these new techniques make it possible. In conclusion, these new methods change the style and conception of hepatic infusion, and these make much progress on the treatment of patients with metastatic liver cancer. (author)

  16. Dysprosium Acetylacetonato Single-Molecule Magnet Encapsulated in Carbon Nanotubes

    Directory of Open Access Journals (Sweden)

    Ryo Nakanishi

    2016-12-01

    Full Text Available Dy single-molecule magnets (SMMs, which have several potential uses in a variety of applications, such as quantum computing, were encapsulated in multi-walled carbon nanotubes (MWCNTs by using a capillary method. Encapsulation was confirmed by using transmission electron microscopy (TEM. In alternating current magnetic measurements, the magnetic susceptibilities of the Dy acetylacetonato complexes showed clear frequency dependence even inside the MWCNTs, meaning that this hybrid can be used as magnetic materials in devices.

  17. Lead macro-encapsulation conceptual and experimental studies

    International Nuclear Information System (INIS)

    Orebaugh, E.G.

    1993-01-01

    Macro-encapsulation, the regulatory treatment for radioactively contaminated lead (mixed) waste has been conceptually and experimentally evaluated for practical application. Epoxy encapsulants molded around lead billets have proven to be exceptionally rugged, easily applied, have high radiation and chemical stability, and minimize required process equipment and production of secondary wastes. This technology can now be considered developed, and can be applied as discussed in this report

  18. Infusion of innovative technologies for mission operations

    Science.gov (United States)

    Donati, Alessandro

    2010-11-01

    The Advanced Mission Concepts and Technologies Office (Mission Technologies Office, MTO for short) at the European Space Operations Centre (ESOC) of ESA is entrusted with research and development of innovative mission operations concepts systems and provides operations support to special projects. Visions of future missions and requests for improvements from currently flying missions are the two major sources of inspiration to conceptualize innovative or improved mission operations processes. They include monitoring and diagnostics, planning and scheduling, resource management and optimization. The newly identified operations concepts are then proved by means of prototypes, built with embedded, enabling technology and deployed as shadow applications in mission operations for an extended validation phase. The technology so far exploited includes informatics, artificial intelligence and operational research branches. Recent outstanding results include artificial intelligence planning and scheduling applications for Mars Express, advanced integrated space weather monitoring system for the Integral space telescope and a suite of growing client applications for MUST (Mission Utilities Support Tools). The research, development and validation activities at the Mission technologies office are performed together with a network of research institutes across Europe. The objective is narrowing the gap between enabling and innovative technology and space mission operations. The paper first addresses samples of technology infusion cases with their lessons learnt. The second part is focused on the process and the methodology used at the Mission technologies office to fulfill its objectives.

  19. Sliding Friction on Liquid-Infused Surfaces

    Science.gov (United States)

    Rashed, Ziad; Habibi, Mohammad; Boreyko, Jonathan

    2017-11-01

    Slippery porous liquid-infused surfaces (SLIPS) are well-known for their ability to stably minimize the hysteresis of a wide variety of liquids. However, whether SLIPS could also reduce the sliding friction of solid objects has not been given much consideration. Here, we measure the friction force associated with dragging an aluminum cube across an array of ordered silicon micropillars impregnated with silicone oil. The solid fraction of the micropillars was either 0.025 or 0.25, while the viscosity of the silicone oil was 10, 100, or 1,000 cSt. Non-intuitively, it was observed that the sliding friction decreased with increasing lubricant viscosity or increasing solid fraction. These findings suggest that the key parameter is therefore the hydraulic resistance of the alleys between the micropillars, which should be as large as possible to minimize lateral oil drainage from underneath the sliding body. This would indicate that scaling down to nano-roughness would be optimal for minimizing the sliding friction, which was confirmed by additional experiments on a disordered nanostructured substrate.

  20. Encapsulation and delivery of food ingredients using starch based systems.

    Science.gov (United States)

    Zhu, Fan

    2017-08-15

    Functional ingredients can be encapsulated by various wall materials for controlled release in food and digestion systems. Starch, as one of the most abundant natural carbohydrate polymers, is non-allergenic, GRAS, and cheap. There has been increasing interest of using starch in native and modified forms to encapsulate food ingredients such as flavours, lipids, polyphenols, carotenoids, vitamins, enzymes, and probiotics. Starches from various botanical sources in granular or amorphous forms are modified by chemical, physical, and/or enzymatic means to obtain the desired properties for targeted encapsulation. Other wall materials are also employed in combination with starch to facilitate some types of encapsulation. Various methods of crafting the starch-based encapsulation such as electrospinning, spray drying, antisolvent, amylose inclusion complexation, and nano-emulsification are introduced in this mini-review. The physicochemical and structural properties of the particles are described. The encapsulation systems can positively influence the controlled release of food ingredients in food and nutritional applications. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Biodegradable polycaprolactone (PCL) nanosphere encapsulating superoxide dismutase and catalase enzymes.

    Science.gov (United States)

    Singh, Sushant; Singh, Abhay Narayan; Verma, Anil; Dubey, Vikash Kumar

    2013-12-01

    Biodegradable polycaprolactone (PCL) nanosphere encapsulating superoxide dismutase (SOD) and catalase (CAT) were successfully synthesized using double emulsion (w/o/w) solvent evaporation technique. Characterization of the nanosphere using dynamic light scattering, field emission scanning electron microscope, and Fourier transform infrared spectroscopy revealed a spherical-shaped nanosphere in a size range of 812 ± 64 nm with moderate protein encapsulation efficiency of 55.42 ± 3.7 % and high in vitro protein release. Human skin HaCat cells were used for analyzing antioxidative properties of SOD- and CAT-encapsulated PCL nanospheres. Oxidative stress condition in HaCat cells was optimized with exposure to hydrogen peroxide (H2O2; 1 mM) as external stress factor and verified through reactive oxygen species (ROS) analysis using H2DCFDA dye. PCL nanosphere encapsulating SOD and CAT together indicated better antioxidative defense against H2O2-induced oxidative stress in human skin HaCat cells in comparison to PCL encapsulating either SOD or CAT alone as well as against direct supplement of SOD and CAT protein solution. Increase in HaCat cells SOD and CAT activities after treatment hints toward uptake of PCL nanosphere into the human skin HaCat cells. The result signifies the role of PCL-encapsulating SOD and CAT nanosphere in alleviating oxidative stress.

  2. Critical factors affecting cell encapsulation in superporous hydrogels

    International Nuclear Information System (INIS)

    Desai, Esha S; Tang, Mary Y; Gemeinhart, Richard A; Ross, Amy E

    2012-01-01

    We recently showed that superporous hydrogel (SPH) scaffolds promote long-term stem cell viability and cell driven mineralization when cells were seeded within the pores of pre-fabricated SPH scaffolds. The possibility of cell encapsulation within the SPH matrix during its fabrication was further explored in this study. The impact of each chemical component used in SPH fabrication and each step of the fabrication process on cell viability was systematically examined. Ammonium persulfate, an initiator, and sodium bicarbonate, the gas-generating compound, were the two components having significant toxicity toward encapsulated cells at the concentrations necessary for SPH fabrication. Cell survival rates were 55.7% ± 19.3% and 88.8% ± 9.4% after 10 min exposure to ammonium persulfate and sodium bicarbonate solutions, respectively. In addition, solution pH change via the addition of sodium bicarbonate had significant toxicity toward encapsulated cells with cell survival of only 50.3% ± 2.5%. Despite toxicity of chemical components and the SPH fabrication method, cells still exhibited significant overall survival rates within SPHs of 81.2% ± 6.8% and 67.0% ± 0.9%, respectively, 48 and 72 h after encapsulation. This method of cell encapsulation holds promise for use in vitro and in vivo as a scaffold material for both hydrogel matrix encapsulation and cell seeding within the pores. (paper)

  3. Air encapsulation. I. Measurement in a field soil

    International Nuclear Information System (INIS)

    Fayer, M.J.; Hillel, D.

    1986-01-01

    Encapsulated air is an important component of shallow water table fluctuations. Their objective was to measure the quantity and persistence of encapsulated air in a field setting. Using sprinkling rates of either 3.5 x 10 -6 or 3.8 x 10 -5 m s -1 , they brought the water table in a field soil from a depth of 1.5 m to the surface on several occasions. Moisture contents during and after sprinkling were monitored with a neutron probe. Twice following sprinkling, the water table was maintained at the surface for more than 20 d, during which time they continued to monitor moisture contents. With the water table at the surface, differences between the porosity and the measured moisture content were attributed to encapsulated air. Encapsulated air contents ranged from 1.1 to 6.3% of the bulk soil volume, depending on the rate of sprinkling, soil depth, and initial soil moisture content. During ponding, encapsulated air persisted at the 0.3-m depth for up to 28 d. The results indicate that encapsulated air is measurable in a field situation and that its quantity and persistence should be considered in analyzing the results of similar field experiments. 16 references

  4. Sendai virosomal infusion of an adeno-associated virus-derived construct containing neuropeptide Y into primary rat brain cultures.

    Science.gov (United States)

    Wu, P; de Fiebre, C M; Millard, W J; Elmstrom, K; Gao, Y; Meyer, E M

    1995-05-05

    A novel neuronal gene-delivery system was investigated in primary neuron-enriched cultures with respect to driving the expression of neuropeptide Y (NPY). This delivery system consists of an adeno-associated virus-derived (AAV) plasmid, pJDT95npy, encapsulated in reconstituted Sendai virosomes. pJDT95npy contains full length rat NPY cDNA inserted downstream from the P40 promoter in a cap-gene deleted AAV-derived construct. The rep-sequences under control of the P5 and P19 promoters are intact. Virosomally encapsulated pJDT95npy drove the expression of NPY mRNAs, predominantly by P40. Total cellular NPY immunoreactivity and release in the presence of depolarization increased following pJDT95npy-transfection. Neither empty virosomes nor virosomes containing pJDT95 affected NPY mRNA expression or immunoreactivity. This study demonstrates that an AAV-derived plasmid can drive exogenous gene expression in intact neurons after infusion by Sendai virosomes.

  5. The Tolerability and Efficacy of Rapid Infliximab Infusions in Patients with Inflammatory Bowel Disease.

    Science.gov (United States)

    Qazi, Taha; Shah, Bhavesh; El-Dib, Mohammed; Farraye, Francis A

    2016-02-01

    Few studies have assessed the loss of efficacy or patient and caregiver satisfaction with rapid infliximab infusions. The aim of this study is to assess the tolerability, loss of efficacy and to describe the impact on resource utilization and patient satisfaction in rapid infliximab infusions. Subjects with inflammatory bowel disease receiving rapid infliximab infusions were included in the study. Subjects received maintenance infusions from June 2011 to June 2013. Incidence of adverse reactions and the total number of rapid infliximab infusions were recorded. Efficacy was compared to published studies evaluating the long-term efficacy of infliximab infusions. Patient satisfaction was addressed through a survey following the implementation of the rapid infusion protocol. Seventy-five subjects with IBD were included in the study. Five hundred and twenty-two rapid infliximab infusions were provided to patients. There were no acute or delayed infusion reactions. Ten subjects (13 %) required either a dose escalation or interval adjustment between infliximab infusions. A majority of patients reported increased satisfaction with 1-h infliximab infusions, and 97 % of surveyed patients opted to continue rapid infusions. The rapid infliximab infusion protocol increased infusion unit efficiency by increasing capacity by 15 %. Cost savings in the elimination of nursing time translated to approximately $108,150 savings at our institution. Rapid infliximab infusions do not appear to increase the risk of loss of response compared to historical studies of long-term infliximab efficiency. A rapid infliximab infusion protocol improved efficiency in our infusion unit and increased patient and nursing satisfaction.

  6. [Adjustment of unstable diabetics with a simple insulin infusion program].

    Science.gov (United States)

    Morell, B; Blatter, G; Froesch, E R

    1978-11-18

    In view of the importance of knowing exactly how much insulin is required by diabetics who are difficult to control with subcutaneous insulin, an insulin infusion program has been tried in such patients. The apparatus, which was produced by Siemens as a prototype, works according to the following simple and flexible principle: During the day a basal rate of insulin is continuously infused. During the three main meals an additional rectangular insulin infusion is initiated by turning a knob. After an hour the apparatus switches automatically back to the basal ratio. We have used this machine in 13 patients who are fully mobile. 11 of them showed an almost ideal blood sugar profile after 4 days. After switching back to subcutaneous insulin 8 of these 11 patients did better than before but not as well as on the insulin infusion program.

  7. Infusing Personal Responsibility into the Curriculum and Cocurriculum: Campus Examples

    Science.gov (United States)

    O'Neill, Nancy

    2013-01-01

    This chapter highlights good practices and lessons learned for infusing personal responsibility--striving for excellence, cultivating academic integrity, and developing competence in ethical and moral reasoning and action--as outcomes of college.

  8. Resin Infusion Rigidized Inflatable Concept Development and Demonstration

    Data.gov (United States)

    National Aeronautics and Space Administration — A novel concept utilizing resin infusion to rigidize inflatable structures was developed at JSC ES. This ICA project intends to complete manufacturing of a prototype...

  9. Resin Infusion Rigidized Inflatable Concept Development and Demonstration Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Utilizing resin infusion to rigidize an inflatable structure and form fiber-reinforced composites on-orbit is a novel concept that builds on current NASA technology...

  10. Osmotic Drying and Nutrient Infusion of Fruits and Vegetables

    National Research Council Canada - National Science Library

    Cohen, Joseph

    1999-01-01

    .... Initially, six commercial fruit products were chosen for long-term storage. Two representative products, mango-flavored apple cubes and cherries, were then prepared with infused vitamins and minerals...

  11. Peripheral IV Insulin Infusion Infiltration Presenting as "Insulin Resistance".

    Science.gov (United States)

    Kim, Tiffany Y; Woeber, Kenneth A; MacMaster, Heidimarie Windham; Rushakoff, Robert J

    2016-11-01

    We present the case of a 66-year-old woman who developed hypoglycemia following the prolonged infiltration of a high dose continuous peripheral IV insulin infusion. Case report. PubMed was searched for relevant literature on exogenous hyperinsulinemic hypoglycemia. The patient was postlung transplantation and was receiving high doses of glucocorticoids. Despite increasing the peripheral IV insulin rate, hyperglycemia persisted. We discovered that the IV insulin infusion line infiltrated, resulting in a large subcutaneous insulin depot, estimated to be 450 units of regular insulin. She subsequently experienced prolonged hypoglycemia that was managed with concentrated dextrose containing fluids. In our literature search, there were no similar case reports. The literature on insulin overdose, usually from suicide attempts, can help guide the management of iatrogenic hyperinsulinemic hypoglycemia. Important management considerations include anticipated duration of hypoglycemia, supplemental glucose, fluid management, and electrolyte monitoring. Peripheral IV insulin infusion infiltration should be considered when patients do not respond to increasing rates of insulin infusion.

  12. Attribute based selection of thermoplastic resin for vacuum infusion process

    DEFF Research Database (Denmark)

    Prabhakaran, R.T. Durai; Lystrup, Aage; Løgstrup Andersen, Tom

    2011-01-01

    The composite industry looks toward a new material system (resins) based on thermoplastic polymers for the vacuum infusion process, similar to the infusion process using thermosetting polymers. A large number of thermoplastics are available in the market with a variety of properties suitable...... for different engineering applications, and few of those are available in a not yet polymerised form suitable for resin infusion. The proper selection of a new resin system among these thermoplastic polymers is a concern for manufactures in the current scenario and a special mathematical tool would...... be beneficial. In this paper, the authors introduce a new decision making tool for resin selection based on significant attributes. This article provides a broad overview of suitable thermoplastic material systems for vacuum infusion process available in today’s market. An illustrative example—resin selection...

  13. Vacuum Infusion of Low-Cost Aerospce Composites

    National Research Council Canada - National Science Library

    Labordus, Maarten

    2002-01-01

    This report results from a contract tasking TNO Industrie as follows: A mold system will be designed in which the hydrostatic pressure can be measured in the resin during the vacuum infusion process...

  14. Accidental intravenous infusion of air: a concise review.

    Science.gov (United States)

    Wilkins, Robert G; Unverdorben, Martin

    2012-01-01

    The unintended intravenous infusion of small volumes of air is common in clinical practice. International Electrotechnical Commission guidelines for infusion pumps permit infusion of up to 1 mL in 15 minutes and discount bubbles smaller than 50 μL. A review of the literature, however, suggests that these limits may be too generous. Neonates and patients with right-to-left cardiac shunts (eg, patent foramen ovale [PFO]) are at risk from lower volumes. Because PFO is prevalent in 20% to 27% of healthy adults and generally asymptomatic, all patients are at risk from small air bubbles, although clinically significant air embolism from intravenous infusion is rare. Attention to good clinical practice and use of an inline air filter should be considered to reduce any risk.

  15. Infusing Social Responsibility into the Curriculum and Cocurriculum: Campus Examples

    Science.gov (United States)

    Reason, Robert D.

    2013-01-01

    This chapter highlights good practices and lessons learned for infusing social responsibility--contributing to the larger community and taking seriously the perspectives of others--as outcomes of college.

  16. Caffeine in teas: levels, transference to infusion and estimated intake

    OpenAIRE

    TFOUNI, Silvia Amelia Verdiani; CAMARA, Maíra Marcuci; KAMIKATA, Kamille; GOMES, Fernanda Moralez Leme; FURLANI, Regina Prado Zanes

    2018-01-01

    Abstract Caffeine is naturally present in several foods, being one of the most consumed dietary ingredients in the world; however, excessive intake may cause health concerns. This study evaluated caffeine levels in teas and their infusions, the transference rate during brewing, and estimated caffeine intake from tea infusion. Brands and batches of 4 types of teas were analyzed for caffeine content by high performance liquid chromatography with a diode array detector. Mate tea was the one that...

  17. Infusing Software Engineering Technology into Practice at NASA

    Science.gov (United States)

    Pressburger, Thomas; Feather, Martin S.; Hinchey, Michael; Markosia, Lawrence

    2006-01-01

    We present an ongoing effort of the NASA Software Engineering Initiative to encourage the use of advanced software engineering technology on NASA projects. Technology infusion is in general a difficult process yet this effort seems to have found a modest approach that is successful for some types of technologies. We outline the process and describe the experience of the technology infusions that occurred over a two year period. We also present some lessons from the experiences.

  18. A formulation to encapsulate nootkatone for tick control.

    Science.gov (United States)

    Behle, Robert W; Flor-Weiler, Lina B; Bharadwaj, Anuja; Stafford, Kirby C

    2011-11-01

    Nootkatone is a component of grapefruit oil that is toxic to the disease-vectoring tick, Ixodes scapularis Say, but unfortunately causes phytotoxicity to treated plants and has a short residual activity due to volatility. We prepared a lignin-encapsulated nootkatone formulation to compare with a previously used emulsifiable formulation for volatility, plant phytotoxicity, and toxicity to unfed nymphs of I. scapularis. Volatility of nootkatone was measured directly by trapping nootkatone vapor in a closed system and indirectly by measuring nootkatone residue on treated filter paper after exposure to simulated sunlight (Xenon). After 24 h in the closed system, traps collected only 15% of the nootkatone applied as the encapsulated formulation compared with 40% applied as the emulsifiable formulation. After a 1-h light exposure, the encapsulated formulation retained 92% of the nootkatone concentration compared with only 26% retained by the emulsifiable formulation. For plant phytotoxicity, cabbage, Brassica oleracea L., leaves treated with the encapsulated formulation expressed less necrosis, retaining greater leaf weight compared with leaves treated with the emusifiable formulation. The nootkatone in the emulsifiable formulation was absorbed by cabbage and oat, Avena sativa L., plants (41 and 60% recovered 2 h after application, respectively), as opposed to 100% recovery from the plants treated with encapsulated nootkatone. Using a treated vial technique, encapsulated nootkatone was significantly more toxic to I. scapularis nymphs (LC50 = 20 ng/cm2) compared with toxicity of the emulsifiable formulation (LC50 = 35 ng/cm2). Thus, the encapsulation of nootkatone improved toxicity for tick control, reduced nootkatone volatility, and reduced plant phytotoxicity.

  19. CRYOPRESERVATION EFFECTS ON RECOMBINANT MYOBLASTS ENCAPSULATED IN ADHESIVE ALGINATE HYDROGELS

    Science.gov (United States)

    Ahmad, Hajira F.; Sambanis, Athanassios

    2013-01-01

    Cell encapsulation in hydrogels is widely used in tissue engineering applications, including encapsulation of islets or other insulin-secreting cells in pancreatic substitutes. Use of adhesive, bio-functionalized hydrogels is receiving increasing attention, as cell-matrix interactions in 3-D can be important for various cell processes. With pancreatic substitutes, studies have indicated benefits of 3-D adhesion on the viability and/or function of insulin-secreting cells. As long-term storage of microencapsulated cells is critical for their clinical translation, cryopreservation of cells in hydrogels is actively being investigated. Previous studies have examined the cryopreservation response of cells encapsulated in non-adhesive hydrogels using conventional freezing and/or vitrification (ice-free cryopreservation), however, none have systematically compared the two cryopreservation methods with cells encapsulated within an adhesive 3-D environment. The latter would be significant, as evidence suggests adhesion influences cellular response to cryopreservation. Thus, the objective of this study was to determine the response to conventional freezing and vitrification of insulin-secreting cells encapsulated in an adhesive biomimetic hydrogel. Recombinant insulin-secreting C2C12 myoblasts were encapsulated in oxidized RGD-alginate and cultured 1 or 4 days post-encapsulation, cryopreserved, and assessed up to 3 days post-warming for metabolic activity and insulin secretion, and one day post-warming for cell morphology. Besides certain transient differences of the vitrified group relative to the Fresh control, both conventional freezing and vitrification maintained metabolism, secretion and morphology of the recombinant C2C12 cells. Thus, due to a simpler procedure and slightly superior results, conventional freezing is recommended over vitrification for the cryopreservation of C2C12 cells in oxidized RGD-modified alginate. PMID:23499987

  20. In vitro confirmation of the quantitative differentiation of liposomal encapsulated and non-encapsulated prednisolone (phosphate) tissue concentrations by murine phosphatases

    NARCIS (Netherlands)

    Smits, Evelien A W; Soetekouw, José A; Vromans, Herman

    The quantitative differentiation of liposomal encapsulated and non-encapsulated drug tissue concentrations is desirable, since the efficacy and toxicity are only related to the level of non-encapsulated drug. However, such separate concentration profiles in tissues have still not been reported due

  1. A new drip infusion monitoring system - biomed 2010.

    Science.gov (United States)

    Ogawa, Hidekuni; Yonezawa, Yoshiharu; Maki, Hiromichi; Hahn, Allen W; Caldwell, W Morton

    2010-01-01

    A new drip infusion solution monitoring system has been developed for hospital and care facility use. The system detects and counts the fall of each drip chamber drop of fluid. Two non-contacting copper foil electrodes are used; one wrapped around the infusion supply polyvinyl-chloride tube under the solution bag and another around the drip chamber, forming two capacitors. Drip infusion fluids have electrical conductivity, so the capacitors are a series-connected electrical impedance. A thirty kHz sine wave is applied to the infusion tube electrode and the capacity-coupled signal on the drip chamber electrode is the transducer output. When an infusion fluid drop is forming, its diameter, and therefore drip chamber capacitance, are increasing, causing change in the output signal. When the drop reaches sufficient diameter to fall, the drip chamber capacitance decreases, which briefly returns the output signal to baseline. Therefore, the growth, fall, and drip rate of each drop of fluid can be detected from the output signal waveform. The system also has advantages of being insensitive to ambient light type and intensity, and detects when the infusion bag is empty.

  2. Lipolytic response to glucose infusion in human subjects

    International Nuclear Information System (INIS)

    Wolfe, R.R.; Peters, E.J.

    1987-01-01

    The authors have determined the effect of various rates of glucose infusion on the rates of release of glycerol (R/sub a/ glycerol), free fatty acids (R/sub a/ FFA), and on energy metabolism in normal human volunteers. Plasma kinetics were determined with use of the stable isotopic tracers D-5-glycerol and [1- 13 C]palmitate, and energy metabolism was determined by indirect calorimetry. The effect of glucose infusion on R/sub a/ glycerol and R/sub a/ FFA was dose-dependent. At 4 mg x kg -1 x min -1 , both R/sub a/ glycerol and R/sub a/ FFA were suppressed; at 8 mg x kg -1 x min -1 , R/sub a/ FFA was even more depressed, but R/sub a/ glycerol was similar to the value during the 4 mg x kg -1 x min -1 infusion. At all infusion rates tested, the amount of potential energy available from the sum of the glucose infusion and endogenously mobilized fat was always greater than when no glucose was infused. Glucose decreased fat mobilization by both inhibiting lipolysis and stimulating reesterification, thus causing a significant increase in triglyceride-fatty acid substrate cycling within the adipose tissue. Plasma insulin was determined by radioimmunoassay

  3. Tracer studies with aortic infusion result in improper tracer distribution

    International Nuclear Information System (INIS)

    Wisneski, J.A.; Brooks, G.A.; Neese, R.A.; Stanley, W.C.; Morris, D.L.; Gertz, E.W.

    1986-01-01

    It has been suggested that lactate turnover can be accurately assessed by infusing radioactive lactate tracer into the aorta and sampling blood in the vena cava. However, there may be streaming of newly infused tracer in the aorta, resulting in a nonuniform arterial specific activity (SA). Furthermore vena caval blood may not be representative of mixed venous blood. The authors examined this problem in 7 anesthetized dogs with sampling catheters in the pulmonary (PA), carotid (CA), and femoral (FA) arteries, and the superior (SVC) and inferior (IVC) vena cavi. [1- 14 C]lactate was continuously infused into the left ventricle through a catheter introduced through the femoral artery. The same SA (dpm/μmol) was found in the CA and FA, indicating adequate mixing of newly infused tracer with trace. Three dogs showed differences between SVC, IVC and PA, suggesting a mixed venous sample can not be obtained from the VC. When the catheter was moved into the aorta, wide differences in SA appeared between the CA and FA, clearly reflecting streaming of tracer. These differences also appeared in the SVC and IVC. In conclusion, adequate mixing does not occur between tracer and trace in arterial blood with aortic infusion. Further, VC sampling will not give a consistent mixed venous SA. Therefore, for practical reasons, aortic tracer infusion with vena caval sampling will lead to erroneous turnover values

  4. Propofol Infusion Syndrome in Adults: A Clinical Update

    Directory of Open Access Journals (Sweden)

    Aibek E. Mirrakhimov

    2015-01-01

    Full Text Available Propofol infusion syndrome is a rare but extremely dangerous complication of propofol administration. Certain risk factors for the development of propofol infusion syndrome are described, such as appropriate propofol doses and durations of administration, carbohydrate depletion, severe illness, and concomitant administration of catecholamines and glucocorticosteroids. The pathophysiology of this condition includes impairment of mitochondrial beta-oxidation of fatty acids, disruption of the electron transport chain, and blockage of beta-adrenoreceptors and cardiac calcium channels. The disease commonly presents as an otherwise unexplained high anion gap metabolic acidosis, rhabdomyolysis, hyperkalemia, acute kidney injury, elevated liver enzymes, and cardiac dysfunction. Management of overt propofol infusion syndrome requires immediate discontinuation of propofol infusion and supportive management, including hemodialysis, hemodynamic support, and extracorporeal membrane oxygenation in refractory cases. However, we must emphasize that given the high mortality of propofol infusion syndrome, the best management is prevention. Clinicians should consider alternative sedative regimes to prolonged propofol infusions and remain within recommended maximal dose limits.

  5. Encapsulation and Nano-Encapsulation of Papain Active Sites to Enhance Radiolityc Stability and Decrease Toxicity

    International Nuclear Information System (INIS)

    Lugão, A.B.; Varca, G.H.C.; Paiffer, F.; Mathor, M.B.; Lopes, P.S.; Rogero, S.; Rogero, J.R.

    2009-01-01

    Papain is used as an ingredient in various enzymatic debridement preparations. Those paste-like preparations are based on water solution and usually are sterilized by radiation. As a consequence, there is a major decrease in papain activity. Papain containing preparations are used in chronic wounds treatment in order to clean and remove the necrotic tissue. However FDA (2008) is taking an action against such products due to severe adverse events reported in patients which were submitted to papain treatments. Thus, the main goal of this proposal is to develop encapsulated papain containing membranes based on hydrogels and silicone rubber in an attempt to achieve a controllable distribution of size and delivery profile, a toxicity reduction and provide stability towards radiation processing through nanoencapsulation with cyclodextrins, which may also provide protection to the enzyme against radiation induced radiolysis. (author)

  6. Intravenous lidocaine infusion--a new treatment of chronic painful diabetic neuropathy?

    DEFF Research Database (Denmark)

    Kastrup, J; Petersen, P; Dejgård, A

    1987-01-01

    after lidocaine infusion compared to after saline infusion (P less than 0.05 and P less than 0.02, respectively). The duration of the individual effect ranged from 3 to 21 days. Lidocaine infusion had no effect on the objective measurements of neuropathy. Intravenous lidocaine infusion seems to be a new...

  7. Time factor of BSH from intravenous infusion to neutron irradiation for BNCT in patients with glioblastoma

    International Nuclear Information System (INIS)

    Kageji, T.; Nagahiro, S.; Kitamura, K.; Nakagawa, Y.; Hatanaka, H.; Haritz, D.; Grochulla, F.; Haselsberger, K.; Gabel, D.

    2000-01-01

    The present report evaluates the time factor of BSH from infusion to irradiation in patients with glioblastoma as a cooperative study in Europe and Japan. For BNCT with BSH after intravenous infusion, this work confirms that the planned neutron irradiation after intravenous BSH infusion appears to be optimal around 12-19 hours after the infusion. (author)

  8. Infusion of hypertonic saline before elective hysterectomy: effects on cytokines and stress hormones

    DEFF Research Database (Denmark)

    Kolsen-Petersen, J A; Bendtzen, K; Tonnesen, E

    2008-01-01

    Infusion of hypertonic saline provides early haemodynamic benefits and may affect the immune system. It is unknown if infusion of hypertonic saline affects plasma cytokines and stress hormones after surgery.......Infusion of hypertonic saline provides early haemodynamic benefits and may affect the immune system. It is unknown if infusion of hypertonic saline affects plasma cytokines and stress hormones after surgery....

  9. Recent trends and applications of encapsulating materials for probiotic stability.

    Science.gov (United States)

    Riaz, Qurat Ul Ain; Masud, Tariq

    2013-01-01

    The importance of probiotics and their live delivery in the gastrointestinal tract has gained much importance in the recent past. Many reports have indicated that there is poor viability of probiotic bacteria in dairy based products, both fermented and non-fermented, and also in the human gastro-intestinal system is questionable. In this case, microencapsulation is the most significant emerging and efficient technology that is being used for the preservation of probiotics against adverse environmental conditions. Apart from different techniques of microencapsulation, various types of encapsulating materials are also used for the process, namely, alginate, chitosan, carrageenan, gums (locust bean, gellan gum, xanthan gum, etc.), gelatin, whey protein, starch, and compression coating. Each one of the encapsulating materials has its own unique characteristics of capsule formation and provision of shape, appearance, and strength to microbeads. The type of encapsulating material also influences the viability of probiotics during storage, processing, and in the gastrointestinal tract. The effectiveness of any material depends not upon its capsule forming capability, strength, and enhancing viability but also on its cheapness, availability, and biocompatibility. So, added convenience and reduced packaging costs may also be used to offset the cost of encapsulating one or more ingredients. Encapsulated forms of ingredients provide a longer shelf life for the product.

  10. Encapsulation plant preliminary design, phase 2. Repository connected facility

    International Nuclear Information System (INIS)

    Kukkola, T.

    2006-12-01

    The disposal facility of the spent nuclear fuel will be located in Olkiluoto. The encapsulation plant is a part of the disposal facility. In this report, an independent encapsulation plant is located above the underground repository. In the encapsulation plant, the spent fuel is received and treated for disposal. In the fuel handling cell, the spent fuel assemblies are unloaded from the spent fuel transport casks and loaded into the disposal canisters. The gas atmosphere of the disposal canister is changed, the bolted inner canister lid is closed, and the electron beam welding method is used to close the lid of the outer copper canister. The disposal canisters are cleaned and transferred into the buffer store after the machining and inspection of the copper lid welds. From the buffer store, the disposal canisters are transferred into the repository spaces by help of the canister lift. All needed stages of operation are to be performed safely without any activity releases or remarkable personnel doses. The bentonite block interim storage is associated with the encapsulation plant. The bentonite blocks are made from bentonite powder. The bentonite blocks are used as buffer material around the disposal canister in the deposition hole. The average production rate of the encapsulation plant is 40 canisters per year. The nominal maximum production capacity is 100 canisters per year in one shift operation. (orig.)

  11. Production of Methanol from Methane by EncapsulatedMethylosinus sporium.

    Science.gov (United States)

    Patel, Sanjay K S; Jeong, Jae-Hoon; Mehariya, Sanjeet; Otari, Sachin V; Madan, Bharat; Haw, Jung Rim; Lee, Jung-Kul; Zhang, Liaoyuan; Kim, In-Won

    2016-12-28

    Massive reserves of methane (CH₄) remain unexplored as a feedstock for the production of liquid fuels and chemicals, mainly because of the lack of economically suitable and sustainable strategies for selective oxidation of CH₄ to methanol. The present study demonstrates the bioconversion of CH₄ to methanol mediated by Type I methanotrophs, such as Methylomicrobium album and Methylomicrobium alcaliphilum . Furthermore, immobilization of a Type II methanotroph, Methylosinus sporium , was carried out using different encapsulation methods, employing sodium-alginate (Na-alginate) and silica gel. The encapsulated cells demonstrated higher stability for methanol production. The optimal pH, temperature, and agitation rate were determined to be pH 7.0, 30°C, and 175 rpm, respectively, using inoculum (1.5 mg of dry cell mass/ml) and 20% of CH₄ as a feed. Under these conditions, maximum methanol production (3.43 and 3.73 mM) by the encapsulated cells was recorded. Even after six cycles of reuse, the Na-alginate and silica gel encapsulated cells retained 61.8% and 51.6% of their initial efficiency for methanol production, respectively, in comparison with the efficiency of 11.5% observed in the case of free cells. These results suggest that encapsulation of methanotrophs is a promising approach to improve the stability of methanol production.

  12. The interaction of encapsulated pharmaceutical drugs with a silica matrix.

    Science.gov (United States)

    Morais, Everton C; Correa, Gabriel G; Brambilla, Rodrigo; Radtke, Claudio; Baibich, Ione Maluf; dos Santos, João Henrique Z

    2013-03-01

    A series of seven drugs, namely, fluoxetine, gentamicin, lidocaine, morphine, nifedipine, paracetamol and tetracycline, were encapsulated. The encapsulated systems were characterized using a series of complementary techniques: Fourier-transform infrared spectroscopy (FT-IR), diffusive reflectance spectroscopy in the UV-vis region (DRS) and X-ray photoelectron spectroscopy (XPS). According to the DRS spectra, most of the encapsulated systems showed a band shift of the maximum absorption when compared with the corresponding bare pharmaceutical. Additionally, after encapsulation, the drugs exhibited infrared band shifts toward higher wavenumbers, which in turn provided insight into potential sites for interaction with the silica framework. The amine group showed a band shift in the spectra of almost all the drugs (except nifedipine and tetracycline). This finding indicates the possibility of a hydrogen bonding interaction between the drug and the silica via electron donation from the amine group to the silica framework. XPS confirmed this interaction between the pharmaceuticals and the silica through the amine group. A correlation was observed between the textural characteristics of the solids and the spectroscopic data, suggesting that the amine groups from the pharmaceuticals were more perturbed upon encapsulation. Copyright © 2012 Elsevier B.V. All rights reserved.

  13. Islet and Stem Cell Encapsulation for Clinical Transplantation

    Science.gov (United States)

    Krishnan, Rahul; Alexander, Michael; Robles, Lourdes; Foster 3rd, Clarence E.; Lakey, Jonathan R.T.

    2014-01-01

    Over the last decade, improvements in islet isolation techniques have made islet transplantation an option for a certain subset of patients with long-standing diabetes. Although islet transplants have shown improved graft function, adequate function beyond the second year has not yet been demonstrated, and patients still require immunosuppression to prevent rejection. Since allogeneic islet transplants have experienced some success, the next step is to improve graft function while eliminating the need for systemic immunosuppressive therapy. Biomaterial encapsulation offers a strategy to avoid the need for toxic immunosuppression while increasing the chances of graft function and survival. Encapsulation entails coating cells or tissue in a semipermeable biocompatible material that allows for the passage of nutrients, oxygen, and hormones while blocking immune cells and regulatory substances from recognizing and destroying the cell, thus avoiding the need for systemic immunosuppressive therapy. Despite advances in encapsulation technology, these developments have not yet been meaningfully translated into clinical islet transplantation, for which several factors are to blame, including graft hypoxia, host inflammatory response, fibrosis, improper choice of biomaterial type, lack of standard guidelines, and post-transplantation device failure. Several new approaches, such as the use of porcine islets, stem cells, development of prevascularized implants, islet nanocoating, and multilayer encapsulation, continue to generate intense scientific interest in this rapidly expanding field. This review provides a comprehensive update on islet and stem cell encapsulation as a treatment modality in type 1 diabetes, including a historical outlook as well as current and future research avenues. PMID:25148368

  14. Solubility, photostability and antifungal activity of phenylpropanoids encapsulated in cyclodextrins.

    Science.gov (United States)

    Kfoury, Miriana; Lounès-Hadj Sahraoui, Anissa; Bourdon, Natacha; Laruelle, Frédéric; Fontaine, Joël; Auezova, Lizette; Greige-Gerges, Hélène; Fourmentin, Sophie

    2016-04-01

    Effects of the encapsulation in cyclodextrins (CDs) on the solubility, photostability and antifungal activities of some phenylpropanoids (PPs) were investigated. Solubility experiments were carried out to evaluate the effect of CDs on PPs aqueous solubility. Loading capacities and encapsulation efficiencies of freeze-dried inclusion complexes were determined. Moreover, photostability assays for both inclusion complexes in solution and solid state were performed. Finally, two of the most widespread phytopathogenic fungi, Fusarium oxysporum and Botrytis cinerea, were chosen to examine the antifungal activity of free and encapsulated PPs. Results showed that encapsulation in CDs significantly increased the solubility and photostability of studied PPs (by 2 to 17-fold and 2 to 44-fold, respectively). Free PPs revealed remarkable antifungal properties with isoeugenol showing the lowest half-maximal inhibitory concentration (IC50) values of mycelium growth and spore germination inhibition. Encapsulated PPs, despite their reduced antifungal activity, could be helpful to solve drawbacks such as solubility and stability. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Nutritional value of micro-encapsulated fish oils in rats

    DEFF Research Database (Denmark)

    Rosenquist, Annemette; Hølmer, Gunhild Kofoed

    1996-01-01

    The nutritional value of a micro-encapsulated fish oil product has been investigated. Three groups of 10 male Wistar rats each were fed dietscontaining 20% (w/w) of fat, and only the type and form of the fat added was different. In the test groups 5% (w/w) of fish oil either as such or in amicro......-encapsulated form was incorporated in the diets. The remaining fat was lard supplemented with corn oil to a dietary content of linoleic acid at10% (w/w). The control group received lard and corn oil only. A mixture similar to the dry matter in the micro-encapsulated product was alsoadded to the diets not containing...... of vitamin E in plasma while the content of vitamin E in the liver was unchanged. Overall, fishoil and micro-encapsulated fish oil resulted in the same fatty acid pattern in the major lipid classes and the same concentrations of liver and plasmalipids. Furthermore, supplementation of fish oil or micro-encapsulated...

  16. Development of an automated encapsulation system. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Gllaher, J.B.

    1977-07-01

    Early development failures in two types of high voltage electronic assemblies pointed out the inadequacies of the current encapsulation process. Voids in the mass encapsulant resulted in the destruction of the units during electrical testing in vacuum. An automated material processing system was conceived after a literature search and after new equipment with increased capabilities was observed in operation at GE's Neutron Devices Department in Florida. A prototype machine was designed and fabricated at Bendix implementing this concept. Environmental controls and new capabilities were incorporated to provide the complete process control necessary to assure void-free encapsulation of densely packaged electronic products. Machine performance was extensively evaluated to assure that all existing material specifications and quality control provisions would be met. Measurements of various material and machine characteristics showed that the operation not only is superior to the one presently being used but also provides the required additional capabilities. Material processing was also simplified which in turn made the encapsulation process more economical. In most cases, a 25 percent decrease in encapsulation costs can be anticipated.

  17. Impact of normal saline infusion on postoperative metabolic acidosis.

    Science.gov (United States)

    Mann, Christian; Held, Ulrike; Herzog, Susanne; Baenziger, Oskar

    2009-11-01

    Standard base excess (SBE) is an important parameter for guiding fluid management in postoperative metabolic acidosis. However, individual SBE components, notably the chloride effect (Cl(eff)), provide valuable additional information. Cl(eff) is the deviation of the strong ion difference (SID) from normal caused by chloride loss or increase and represents the effect on SBE of an abnormal chloride-sodium ratio. Many centers use normal saline (NS) for intravascular volume therapy. In this study, we examined the impact of NS infusion on SBE and its chloride-driven component (Cl(eff)) in postoperative children. The study was conducted in 119 children who underwent post-heart surgery in a Swiss pediatric intensive care unit. The 72-h postoperative course was divided into six observation periods, during which NS input and its impact on SBE and Cl(eff) were measured per period in each patient, and the results compared between patients infused and not infused with NS during each period. Normal saline was infused in 168/625 observation periods if indicated by volume deficit. Postoperative metabolic acidosis and the acidifying Cl(eff) were aggravated in the first 12 postoperative hours. Over the 72 h, NS infusion simultaneously lowered SBE by -0.06 mm x ml(-1) x kg(-1) body weight infused and Cl(eff) by -0.07 mm. Implementing serial Cl(eff) assessment could improve postoperative management by disclosing or excluding hyperchloremia as a cause of acidosis undetectable from SBE alone. Calculating the chloride-driven acidifying side effect of NS infusion using Cl(eff) improves the interpretation of SBE values and can optimize fluid management in postoperative metabolic acidosis.

  18. Continuous intravenous infusions of bromodeoxyuridine as a clinical radiosensitizer

    International Nuclear Information System (INIS)

    Kinsella, T.J.; Mitchell, J.B.; Russo, A.; Aiken, M.; Morstyn, G.; Hsu, S.M.; Rowland, J.; Glatstein, E.

    1984-01-01

    Twelve patients were treated with continuous intravenous (24-hour) infusions of bromodeoxyuridine (BUdR) at 650 or 1000 mg/m2/d for up to two weeks. Myelosuppression, especially thrombocytopenia, was the major systemic toxicity and limited the infusion period to nine to 14 days. However, bone marrow recovery occurred within seven to ten days, allowing for a second infusion in most patients. Local toxicity (within the radiation field) was minimal, with the exception of one of four patients, who underwent abdominal irradiation. Pharmacology studies revealed a steady-state arterial plasma level of 6 x 10(-7) mol/L and 1 x 10(-6) mol/L during infusion of 650 and 1000 mg/m2/d, respectively. In vivo BUdR uptake into normal bone marrow was evaluated in two patients by comparison of preinfusion and postinfusion in vitro radiation survival curves of marrow CFUc with enhancement ratios (D0-pre/D0-post) of 1.8 (with 650 mg/m2/d) and 2.5 (with 1000 mg/m2/d). In vivo BUdR incorporation into normal skin and tumor cells using an anti-BUdR monoclonal antibody and immunohistochemistry was demonstrated in biopsies from three patients revealing substantially less cellular incorporation into normal skin (less than 10%) compared with tumor (up to 50% to 70%). The authors conclude that local and systemic toxicity of continuous infusion of BUdR at 1000 mg/m2/d for approximately two weeks is tolerable. The observed normal tissue toxicity is comparable with previous clinical experience with intermittent (12 hours every day for two weeks) infusions of BUdR. Theoretically, a constant infusion should allow for greater incorporation of BUdR into cycling tumor cells and thus, for further enhancement of radiosensitization

  19. Postoperative analgesia in TKA: ropivacaine continuous intraarticular infusion.

    Science.gov (United States)

    Gómez-Cardero, Primitivo; Rodríguez-Merchán, E Carlos

    2010-05-01

    Postoperative pain control is a challenge in patients undergoing TKA due to side effects and technical limitations of current analgesic approaches. Local anesthetic infiltration through continuous infusion pumps has been shown to reduce postoperative pain in previous studies. We assessed the effectiveness of intraarticular ropivacaine infusions in reducing pain and postoperative opioid use after TKA and determined whether such infusions accelerate functional recovery of the patient and reduce length of hospital stay. In a randomized, prospective, double-blind study, two groups were assigned: Group A (n = 25) underwent continuous intraarticular infusion with 300 mL ropivacaine 0.2% at a speed of 5 mL/hour through an elastomeric infusion pump and Group B (n = 25) had an elastomeric pump insertion with 300 mL saline solution at an infusion speed of 5 mL/hour. All patients had the same prosthesis model implanted. Parameters analyzed over the first 3 days, at discharge, and 1 month later included postoperative pain, joint function, opioid use, and length of hospital stay. All patients in Group A showed a decrease in pain intensity measured by a visual analog scale and opioid use in the first 3 days. Mean length of hospital stay was also reduced in Group A (5.72 days) compared to Group B (7.32 days). There were no device-related complications. Use of an infusion pump is effective in treating pain after TKA, reducing postoperative pain and opioid use. It also improves immediate functionality and patient comfort, reducing the mean length of hospital stay, without increasing the risk of complications. Level I, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

  20. Infusion Nursing: An Evidence-Based Approach - Third edition Alexander Mary Infusion Nursing: An Evidence-Based Approach - Third edition 625pp Elsevier 9781416064107 1416064109 [Formula: see text].

    Science.gov (United States)

    2010-11-03

    This book considers all aspects of infusion therapy and provides a solid evidence base. Its 30 chapters are well organised into six sections covering physiological considerations, infusion therapies and nursing practice.

  1. Efficient Asymmetric Index Encapsulation Scheme for Anonymous Content Centric Networking

    Directory of Open Access Journals (Sweden)

    Rong Ma

    2017-01-01

    Full Text Available Content Centric Networking (CCN is an effective communication paradigm that well matches the features of wireless environments. To be considered a viable candidate in the emerging wireless networks, despite the clear benefits of location-independent security, CCN must at least have parity with existing solutions for confidential and anonymous communication. This paper designs a new cryptographic scheme, called Asymmetric Index Encapsulation (AIE, that enables the router to test whether an encapsulated header matches the token without learning anything else about both of them. We suggest using the AIE as the core protocol of anonymous Content Centric Networking. A construction of AIE which strikes a balance between efficiency and security is given. The scheme is proved to be secure based on the DBDH assumption in the random oracle with tight reduction, while the encapsulated header and the token in our system consist of only three elements.

  2. Degradation of Silicone Encapsulants in CPV Optics: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Miller, David C.; Tappan, Ian A.; Cai, Can; Dauskardt, Reinhold H.

    2016-07-01

    High efficiency multijunction solar cells in terrestrial concentrator photovoltaic (CPV) modules are becoming an increasingly cost effective and viable option in utility scale power generation. As with other utility scale photovoltaics, CPV modules need to guarantee operational lifetimes of at least 25 years. The reliability of optical elements in CPV modules poses a unique materials challenge due to the increased UV irradiance and enhanced temperature cycling associated with concentrated solar flux. The polymeric and thin film materials used in the optical elements are especially susceptible to UV damage, diurnal temperature cycling and active chemical species from the environment. We used fracture mechanics approaches to study the degradation modes including: the adhesion between the encapsulant and the cell or secondary optical element; and the cohesion of the encapsulant itself. Understanding the underlying mechanisms of materials degradation under elevated stress conditions is critical for commercialization of CPV technology and can offer unique insights into degradation modes in similar encapsulants used in other photovoltaic modules.

  3. Charge transfer in conjugated oligomers encapsulated into carbon nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Almadori, Y.; Alvarez, L.; Michel, T.; Le Parc, R.; Bantignies, J.L.; Hermet, P.; Sauvajol, J.L. [Laboratoire Charles Coulomb UMR 5521, Universite Montpellier 2, 34095 Montpellier (France); Laboratoire Charles Coulomb UMR 5521, CNRS, 34095 Montpellier (France); Arenal, R. [Laboratoire d' Etude des Microstructures, CNRS-ONERA, 92322 Chatillon (France); Laboratorio de Microscopias Avanzadas, Instituto de Nanociencia de Aragon, U. Zaragoza, 50018 Zaragoza (Spain); Babaa, R. [Laboratoire de Chimie des Surfaces et Interfaces, CEA, IRAMIS, SPCSI, 91191 Gif-sur-Yvette Cedex (France); Chemical Engineering Department, University of Technology PETRONAS, UTP, Ipoh-Perak (Malaysia); Jouselme, B.; Palacin, S. [Laboratoire de Chimie des Surfaces et Interfaces, CEA, IRAMIS, SPCSI, 91191 Gif-sur-Yvette Cedex (France)

    2011-11-15

    This study deals with a hybrid system consisting in quaterthiophene derivative encapsulated inside single-walled and multi-walled carbon nanotubes. Investigations of the encapsulation step are performed by transmission electron microscopy. Raman spectroscopy data point out different behaviors depending on the laser excitation energy with respect to the optical absorption of quaterthiophene. At low excitation energy (far from the oligomer resonance window) there is no significant modification of the Raman spectra before and after encapsulation. By contrast, at high excitation energy (close to the oligomer resonance window), Raman spectra exhibit a G-band shift together with an important RBM intensity loss, suggesting a significant charge transfer between the inserted molecule and the host nanotubes. Those results suggest a photo induced process leading to a significant charge transfer. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  4. Enzyme encapsulated hollow silica nanospheres for intracellular biocatalysis.

    Science.gov (United States)

    Chang, Feng-Peng; Hung, Yann; Chang, Jen-Hsuan; Lin, Chen-Han; Mou, Chung-Yuan

    2014-05-14

    Hollow silica nanospheres (HSN) with low densities, large interior spaces and permeable silica shells are suitable for loading enzymes in the cavity to carry out intracellular biocatalysis. The porous shell can protect the encapsulated enzymes against proteolysis and attenuate immunological response. We developed a microemulsion-templating method for confining horseradish peroxidase (HRP) in the cavity of HSN. This simple one-pot enzyme encapsulation method allows entrapping of the enzyme, which retains high catalytic activity. Compared with HRP supported on solid silica spheres, HRP@HSN with thin porous silica shells displayed better enzyme activity. The small HRP@HSN (∼50 nm in diameter), giving satisfactory catalytic activity, can act as an intracellular catalyst for the oxidation of the prodrug indole-3-acetic acid to produce toxic free radicals for killing cancer cells. We envision this kind of hollow nanosystem could encapsulate multiple enzymes or other synergistic drugs and function as therapeutic nanoreactors.

  5. Encapsulation of bacteria and viruses in electrospun nanofibres

    International Nuclear Information System (INIS)

    Salalha, W; Kuhn, J; Dror, Y; Zussman, E

    2006-01-01

    Bacteria and viruses were encapsulated in electrospun polymer nanofibres. The bacteria and viruses were suspended in a solution of poly(vinyl alcohol) (PVA) in water and subjected to an electrostatic field of the order of 1 kV cm -1 . Encapsulated bacteria in this work (Escherichia coli, Staphylococcus albus) and bacterial viruses (T7, T4, λ) managed to survive the electrospinning process while maintaining their viability at fairly high levels. Subsequently the bacteria and viruses remain viable during three months at -20 and -55 deg. C without a further decrease in number. The present results demonstrate the potential of the electrospinning process for the encapsulation and immobilization of living biological material

  6. Encapsulation method for atom probe tomography analysis of nanoparticles.

    Science.gov (United States)

    Larson, D J; Giddings, A D; Wu, Y; Verheijen, M A; Prosa, T J; Roozeboom, F; Rice, K P; Kessels, W M M; Geiser, B P; Kelly, T F

    2015-12-01

    Open-space nanomaterials are a widespread class of technologically important materials that are generally incompatible with analysis by atom probe tomography (APT) due to issues with specimen preparation, field evaporation and data reconstruction. The feasibility of encapsulating such non-compact matter in a matrix to enable APT measurements is investigated using nanoparticles as an example. Simulations of field evaporation of a void, and the resulting artifacts in ion trajectory, underpin the requirement that no voids remain after encapsulation. The approach is demonstrated by encapsulating Pt nanoparticles in an ZnO:Al matrix created by atomic layer deposition, a growth technique which offers very high surface coverage and conformality. APT measurements of the Pt nanoparticles are correlated with transmission electron microscopy images and numerical simulations in order to evaluate the accuracy of the APT reconstruction. Copyright © 2015 Elsevier B.V. All rights reserved.

  7. Polymeric nanoparticles encapsulating white tea extract for nutraceutical application.

    Science.gov (United States)

    Sanna, Vanna; Lubinu, Giuseppe; Madau, Pierluigi; Pala, Nicolino; Nurra, Salvatore; Mariani, Alberto; Sechi, Mario

    2015-02-25

    With the aim to obtain controlled release and to preserve the antioxidant activity of the polyphenols, nanoencapsulation of white tea extract into polymeric nanoparticles (NPs) based on poly(ε-caprolactone) (PCL) and alginate was successfully performed. NPs were prepared by nanoprecipitation method and were characterized in terms of morphology and chemical properties. Total polyphenols and catechins contents before and after encapsulation were determined. Moreover, in vitro release profiles of encapsulated polyphenols from NPs were investigated in simulated gastrointestinal fluids. The antioxidant activity and stability of encapsulated extract were further evaluated. Interestingly, NPs released 20% of the polyphenols in simulated gastric medium, and 80% after 5 h at pH 7.4, showing a good capacity to control the polyphenols delivery. Furthermore, DPPH(•) assay confirmed that white tea extract retained its antioxidant activity and NPs protected tea polyphenols from degradation, thus opening new perspectives for the exploitation of white tea extract-loaded NPs for nutraceutical applications.

  8. Properties of probiotics and encapsulated probiotics in food.

    Science.gov (United States)

    Ozyurt, V Hazal; Ötles, Semih

    2014-01-01

    Probiotics are microorganisms which confer health benefits upon application in sufficiently-high viable cell amounts. Probiotics are typically members of Lactobacillus and Bifidobacterium species commonly associated with human gastrointestinal tracts. In the recent past, there has been a rising interest in producing functional foods containing encapsulated probiotic bacteria. Recent studies have been reported using dairy products like cheese, yogurt and ice cream as food carrier, and non-dairy products like meat, fruits, cereals, chocolate, etc. However, the industrial sector contains only few encapsulated probiotic products. Probiotics have been developed by several companies in a capsule or a tablet form. The review compiles probiotics, encapsulation technology and cell life in the food matrices.

  9. Stable Fe nanomagnets encapsulated inside vertically-aligned carbon nanotubes.

    Science.gov (United States)

    Bondino, Federica; Magnano, Elena; Ciancio, Regina; Castellarin Cudia, Carla; Barla, Alessandro; Carlino, Elvio; Yakhou-Harris, Flora; Rupesinghe, Nalin; Cepek, Cinzia

    2017-12-06

    Well-defined sized (5-10 nm) metallic iron nanoparticles (NPs) with body-centered cubic structure encapsulated inside the tip of millimeter-long vertically aligned carbon nanotubes (VACNTs) of uniform length have been investigated with high-resolution transmission electron microscopy and soft X-ray spectroscopy techniques. Surface-sensitive and chemically-selective measurements have been used to evaluate the magnetic properties of the encapsulated NPs. The encapsulated Fe NPs display magnetic remanence up to room temperature, low coercivity, high chemical stability and no significant anisotropy. Our surface-sensitive measurements combined with the specific morphology of the studied VACNTs allow us to pinpoint the contribution of the surface oxidized or hydroxidized iron catalysts present at the VACNT-substrate interface.

  10. Evaluation of Encapsulated Inhibitor for Autonomous Corrosion Protection

    Science.gov (United States)

    Johnsey, M. N.; Li, W.; Buhrow, J. W.; Calle, L. M.; Pearman, B. P.; Zhang, X.

    2015-01-01

    This work concerns the development of smart coating technologies based on microencapsulation for the autonomous control of corrosion. Microencapsulation allows the incorporation of corrosion inhibitors into coating which provides protection through corrosion-controlled release of these inhibitors.One critical aspect of a corrosion protective smart coating is the selection of corrosion inhibitor for encapsulation and comparison of the inhibitor function before and after encapsulation. For this purpose, a systematic approach is being used to evaluate free and encapsulated corrosion inhibitors by salt immersion. Visual, optical microscope, and Scanning Electron Microscope (with low-angle backscatter electron detector) are used to evaluate these inhibitors. It has been found that the combination of different characterization tools provide an effective method for evaluation of early stage localized corrosion and the effectiveness of corrosion inhibitors.

  11. Encapsulation of health-promoting ingredients: applications in foodstuffs.

    Science.gov (United States)

    Tolve, Roberta; Galgano, Fernanda; Caruso, Marisa Carmela; Tchuenbou-Magaia, Fideline Laure; Condelli, Nicola; Favati, Fabio; Zhang, Zhibing

    2016-12-01

    Many nutritional experts and food scientists are interested in developing functional foods containing bioactive agents and many of these health-promoting ingredients may benefit from nano/micro-encapsulation technology. Encapsulation has been proven useful to improve the physical and the chemical stability of bioactive agents, as well as their bioavailability and efficacy, enabling their incorporation into a wide range of formulations aimed to functional food production. There are several reviews concerning nano/micro-encapsulation techniques, but none are focused on the incorporation of the bioactive agents into food matrices. The aim of this paper was to investigate the development of microencapsulated food, taking into account the different bioactive ingredients, the variety of processes, techniques and coating materials that can be used for this purpose.

  12. Enhanced structural stability of DNA origami nanostructures by graphene encapsulation

    International Nuclear Information System (INIS)

    Matković, Aleksandar; Vasić, Borislav; Pešić, Jelena; Gajić, Radoš; Prinz, Julia; Bald, Ilko; Milosavljević, Aleksandar R

    2016-01-01

    We demonstrate that a single-layer graphene replicates the shape of DNA origami nanostructures very well. It can be employed as a protective layer for the enhancement of structural stability of DNA origami nanostructures. Using the AFM based manipulation, we show that the normal force required to damage graphene encapsulated DNA origami nanostructures is over an order of magnitude greater than for the unprotected ones. In addition, we show that graphene encapsulation offers protection to the DNA origami nanostructures against prolonged exposure to deionized water, and multiple immersions. Through these results we demonstrate that graphene encapsulated DNA origami nanostructures are strong enough to sustain various solution phase processing, lithography and transfer steps, thus extending the limits of DNA-mediated bottom-up fabrication. (paper)

  13. Stability of lactobacilli encapsulated in various microbial polymers.

    Science.gov (United States)

    Jiménez-Pranteda, María Luján; Poncelet, Denis; Náder-Macías, María Elena; Arcos, Antonio; Aguilera, Margarita; Monteoliva-Sánchez, Mercedes; Ramos-Cormenzana, Alberto

    2012-02-01

    Various microbial polymers, namely xanthan gum, gellan gum, pullulan gum and jamilan, were tested as a suitable encapsulating material for Lactobacillus plantarum CRL 1815 and Lactobacillus rhamnosus ATCC 53103. Resulting capsules were also studied for their pH and simulated gastrointestinal conditions tolerance. The morphology of the microcapsules was studied using scanning electron microscopy. pH tolerance was tested at pH 2.0, 3.5, 5.0 and 6.5 over a 6h incubation period. Simulated gastrointestinal conditions were assayed with simulated gastric and pancreatic juices and simulated bile over a 24h incubation period. Suspensions of probiotic organisms were used as a control. The results from encapsulation with microbial polymers indicate that mixtures of 1% xanthan gum with 0.75% gellan gum and 1% jamilan with 1% gellan gum were the most suitable for microencapsulation. Results for the pH tolerance tests showed no improvement in the viability of cells in relation to the control, except for pH 2.0 where lactobacilli encapsulated in xanthan:gellan gum (1%:0.75%) prolonged their viability by 6h exposure. Xanthan:gellan gum (1%:0.75%) was the most effective of the encapsulating materials tested in protecting L. plantarum and L. rhamnosus against simulated bile, improving its viability in 1-2 logCFU when compared with control. The results of this study suggest that microbial polymers are an interesting source of encapsulating material that should be taken into account for prospective studies of probiotic encapsulation for oral delivery applications. Copyright © 2011 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  14. Tuning the conductance of carbon nanotubes with encapsulated molecules

    International Nuclear Information System (INIS)

    Meunier, Vincent; Sumpter, Bobby G

    2007-01-01

    It was recently shown that a molecule encapsulated inside a carbon nanotube can be used to devise a novel type of non-volatile memory element. At the heart of the mechanism for storing and reading information is the new concept of a molecular gate where the molecule acts as a passive gate that hinders the flow of electrons for a given position relative to the nanotube host. By systematically exploring the effects of encapsulation of an acceptor molecule in a series of carbon nanotubes, we show that the reliability of the memory mechanism is very sensitive to the interaction between the nanotube host and the molecule guest

  15. Multiple encapsulation of LANL waste using polymers. Final report

    International Nuclear Information System (INIS)

    Schwartz, R.L.

    1994-01-01

    Polymer encapsulation of lead shielding/blasting grit (surrogate) mixed waste was optimized at bench scale using melamine formaldehyde, polyurethane, and butadiene thermosetting polymers. Three pellet-based intermediate waste forms, and a final waste form, were prepared, each providing an additional level of integrity. Encapsulated waste integrity was measured by chemical and physical techniques. Compliance was established using the Toxicity Characteristic Leaching Procedure. Equipment appropriate to pilot-scale demonstration of program techniques was investigated. A preliminary equipment list and layout, and process block flow diagram were prepared

  16. Oxidation of Bioethanol using Zeolite-Encapsulated Gold Nanoparticles

    DEFF Research Database (Denmark)

    Mielby, Jerrik Jørgen; Abildstrøm, Jacob Oskar; Wang, Feng

    2014-01-01

    With the ongoing developments in biomass conversion, the oxidation of bioethanol to acetaldehyde may become a favorable and green alternative to the preparation from ethylene. Here, a simple and effective method to encapsulate gold nanoparticles in zeolite silicalite-1 is reported and their high...... zeolite crystals comprise a broad range of mesopores and contain up to several hundred gold nanoparticles with a diameter of 2-3nm that are distributed inside the zeolites rather than on the outer surface. The encapsulated nanoparticles have good stability and result in 50% conversion of ethanol with 98...

  17. Oxidation of Bioethanol using Zeolite-Encapsulated Gold Nanoparticles

    DEFF Research Database (Denmark)

    Mielby, Jerrik Jørgen; Abildstrøm, Jacob Oskar; Wang, Feng

    2014-01-01

    With the ongoing developments in biomass conversion, the oxidation of bioethanol to acetaldehyde may become a favorable and green alternative to the preparation from ethylene. Here, a simple and effective method to encapsulate gold nanoparticles in zeolite silicalite‐1 is reported and their high...... zeolite crystals comprise a broad range of mesopores and contain up to several hundred gold nanoparticles with a diameter of 2–3 nm that are distributed inside the zeolites rather than on the outer surface. The encapsulated nanoparticles have good stability and result in 50 % conversion of ethanol with 98...

  18. Multiple encapsulation of LANL waste using polymers. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Schwartz, R.L.

    1994-08-12

    Polymer encapsulation of lead shielding/blasting grit (surrogate) mixed waste was optimized at bench scale using melamine formaldehyde, polyurethane, and butadiene thermosetting polymers. Three pellet-based intermediate waste forms, and a final waste form, were prepared, each providing an additional level of integrity. Encapsulated waste integrity was measured by chemical and physical techniques. Compliance was established using the Toxicity Characteristic Leaching Procedure. Equipment appropriate to pilot-scale demonstration of program techniques was investigated. A preliminary equipment list and layout, and process block flow diagram were prepared.

  19. Exergy analysis of encapsulation of photochromic dye by spray drying

    Science.gov (United States)

    Çay, A.; Akçakoca Kumbasar, E. P.; Morsunbul, S.

    2017-10-01

    Application of exergy analysis methodology for encapsulation of photochromic dyes by spray drying was presented. Spray drying system was investigated considering two subsystems, the heater and the dryer sections. Exergy models for each subsystem were proposed and exergy destruction rate and exergy efficiency of each subsystem and the whole system were computed. Energy and exergy efficiency of the system were calculated to be 5.28% and 3.40%, respectively. It was found that 90% of the total exergy inlet was destroyed during encapsulation by spray drying and the exergy destruction of the heater was found to be higher.

  20. Continuous propofol infusion in 142 critically ill children.

    Science.gov (United States)

    Cornfield, David N; Tegtmeyer, Ken; Nelson, Michael D; Milla, Carlos E; Sweeney, Michael

    2002-12-01

    In recent years, continuous intravenous propofol infusion has been widely used in pediatric intensive care units. Several case reports have raised concerns about its safety. The objective of this study was to report our experience with continuous intravenous propofol in consecutive patients during an 18-month period. The study design was a retrospective review of a case series. Case was defined as a critically ill child who was treated with continuous intravenous propofol. The attending physician staff agreed to prescribe propofol via continuous intravenous infusion at a dose not to exceed 50 microg/kg/min. The protocol allowed for each patient to receive an additional intravenous bolus of propofol at a dose of 1 mg/kg no more than once per hour. The study entailed data collection from consecutive patients who were prescribed a continuous infusion of propofol in either the pediatric intensive care unit or bone marrow transplant unit. Data from 142 patients were analyzed. Each patient enrolled was adequately sedated. Administration of propofol via continuous intravenous infusion was not associated with metabolic acidosis or hemodynamic compromise. No patient in the study group was inadvertently extubated or had a central venous catheter accidentally discontinued. Propofol can be safely and effectively used to provide sedation to critically ill infants and children. We speculate that continuous infusion of propofol for extended periods of time should not exceed 67 microg/kg/min.

  1. Symptomatic Tarlov Cysts: Surgical Treatment by Subcutaneous Infusion Port.

    Science.gov (United States)

    Huang, Ying; Zhu, Tong; Lin, Hongyi; Li, Jing; Zeng, Tao; Lin, Jian

    2018-05-01

    The treatment of Tarlov cysts is challenging and difficult. The objective of our study was to describe the security and efficacy of the subcutaneous infusion port for drainage of symptomatic Tarlov cysts. The authors executed a retrospective review of data from 5 symptomatic Tarlov cysts patients who were treated using a subcutaneous infusion port from June 2014 to July 2017. Numerical Rating Scale scores and the Japanese Orthopedic Association scores of back pain were analyzed. Complications and adverse effects on postoperative days 1, 7, 14, and 28 were also analyzed. The mean follow-up was 12.6 months. Five adults (3 females and 2 males) who had been symptomatic received a subcutaneous infusion port. After treatment, all patients experienced pain relief and pain alleviation lasted from 1 day to 3 years without complications and adverse effects. A subcutaneous infusion port is a useful treatment option for symptomatic Tarlov cysts. When the patients' symptoms returned and the cysts repressurized, we quickly and simply drained the cysts by using the infusion port. Copyright © 2018 Elsevier Inc. All rights reserved.

  2. Effects of adenosine infusion into renal interstitium on renal hemodynamics

    International Nuclear Information System (INIS)

    Pawlowska, D.; Granger, J.P.; Knox, F.G.

    1987-01-01

    This study was designed to investigate the hemodynamic effects of exogenous adenosine in the interstitium of the rat kidney. Adenosine or its analogues were infused into the renal interstitium by means of chronically implanted capsules. In fusion of adenosine decreased glomerular filtration rate (GFR) from 0.81 +/- 0.06 to 0.37 +/- 0.06 ml/min while having no effect on renal blood flow (RBF). The metabolically stable analogue, 2-chloradenosine (2-ClAdo), decreased GFR from 0.73 +/- 0.07 to 021 +/- 0.06 ml/min. Interstitial infusion of theophylline, an adenosine receptor antagonist, completely abolished the effects of adenosine and 2-ClAdo on GFR. The distribution of adenosine, when infused into the renal interstitium, was determined using radiolabeled 5'-(N-ethyl)-carboxamidoadenosine (NECA), a metabolically stable adenosine agonist. After continuous infusion, [ 3 H]NECA was distributed throughout the kidney. The effects of NECA to reduce GFR were similar to those of adenosine and 2-ClAdo. They conclude that increased levels of adenosine in the renal interstitium markedly decrease GFR without affecting RBF in steady-state conditions. The marked effects of adenosine agonists during their infusion into the renal interstitium and the complete blockade of these effects by theophylline suggest an extracellular action of adenosine

  3. Effect of Intravenous Infusion Solutions on Bioelectrical Impedance Spectroscopy.

    Science.gov (United States)

    Yap, Jason; Rafii, Mahroukh; Azcue, Maria; Pencharz, Paul

    2017-05-01

    Bioelectrical impedance (BIA) is often used to measure body fluid spaces and thereby body composition. However, in acute animal studies, we found that impedance was driven by the saline content of intravenous (IV) fluids and not by the volume. The aim of the study was to investigate the effect of 3 different fluids acutely administered on the change in impedance, specifically resistance (R). Nine healthy adults participated in 3 treatment (0.9% saline, 5% dextrose, and a mixture of 0.3% saline + 3.3% dextrose) experiments on nonconsecutive days. They all received 1 L of one of the treatments intravenously over a 1-hour period. Repeated BIA measurements were performed prior to IV infusion and then every 5 minutes for the 1-hour infusion period, plus 3 more measurements up to 15 minutes after the completion of the infusion. The change in R in the 0.9% saline infusion experiment was significantly lower than that of the glucose and mixture treatment ( P Bioelectrical impedance spectroscopy and BIA measure salt rather than the volume changes over the infusion period. Hence, in patients receiving IV fluids, BIA of any kind (single frequency or multifrequency) cannot be used to measure body fluid spaces or body composition.

  4. Analog experiment of transarterial catheter hyperthermic infusion in vitro

    International Nuclear Information System (INIS)

    Fan Shufeng Li Zheng; Gu Weizhong; Ru Fuming

    2006-01-01

    Objective: To investigate the factors related to the heating effect by transarterial catheter hyperthermic infusion with the evaluation of the feasibility in controlling the tumor temperature. Methods: Infusing 55-68 degree C liquid at the speed of 10-40 ml/min through 6F, 5F or 3F catheter with different length respectively under the similar clinical condition. The liquid temperature at the terminal exit of the catheter was measured with a digital thermometer. The factors related to the liquid temperature at the exit of the catheter were analyzed by multiple regression analysis. Results: The infusion temperature , rate and the catheter length were the main related factors to the liquid temperature at the exit of the catheter as the condition similar in clinical use. When 60-65 degree C liquid was infused at the rate of 20-40 ml/min through 5F catheter with length of 80 cm, the mean and 95% confident interval of the liquid temperature at the catheter exit were (47.55±0.44) degree C and 44.61-48.49 degree C respectively. Conclusions: The liquid temperature at the exit of infusion catheter can be regulated and controlled through adjusting the liquid perfusion temperature and speed. (authors)

  5. Preventing mussel adhesion using lubricant-infused materials

    Science.gov (United States)

    Amini, Shahrouz; Kolle, Stefan; Petrone, Luigi; Ahanotu, Onyemaechi; Sunny, Steffi; Sutanto, Clarinda N.; Hoon, Shawn; Cohen, Lucas; Weaver, James C.; Aizenberg, Joanna; Vogel, Nicolas; Miserez, Ali

    2017-08-01

    Mussels are opportunistic macrofouling organisms that can attach to most immersed solid surfaces, leading to serious economic and ecological consequences for the maritime and aquaculture industries. We demonstrate that lubricant-infused coatings exhibit very low preferential mussel attachment and ultralow adhesive strengths under both controlled laboratory conditions and in marine field studies. Detailed investigations across multiple length scales—from the molecular-scale characterization of deposited adhesive proteins to nanoscale contact mechanics to macroscale live observations—suggest that lubricant infusion considerably reduces fouling by deceiving the mechanosensing ability of mussels, deterring secretion of adhesive threads, and decreasing the molecular work of adhesion. Our study demonstrates that lubricant infusion represents an effective strategy to mitigate marine biofouling and provides insights into the physical mechanisms underlying adhesion prevention.

  6. Investigating Delays in Updates to Infusion Pump Drug Limit Libraries

    Science.gov (United States)

    DeLaurentis, Poching C.; Hsu, Kang-Yu; De la Armenta, Ana Isabel Hoz; Bitan, Yuval

    2016-01-01

    Interoperability is a major challenge in current healthcare systems. It brings big hope for data exchange, but also raises some concern about patient safety. We study the wireless updating of modern infusion pumps and demonstrate the possible flaws in this process. Through analyzing data on drug limit libraries (DLL) versions in one hospital we could identify the delays in distributing DLL updates and the impact these delays might have on patient safety. We found that 31% of all started infusions had used outdated DLL versions, and 22.6% of all alerts were triggered by outdated DLLs. These findings suggest that clinical and operational stakeholders in healthcare systems must address the unreliable interoperability of medical technologies such as seen on infusion pumps. The impact of information inconsistency across healthcare systems might result in use error which would impair patient safety. PMID:28269844

  7. Intracranial hemodynamics during intravenous infusion of glyceryl trinitrate

    DEFF Research Database (Denmark)

    Iversen, Helle Klingenberg; Holm, Søren; Friberg, L

    2008-01-01

    The mechanisms of glyceryl trinitrate (GTN)-induced headache are not fully elucidated. In this study we administered GTN 0.5 microg/kg/min i.v. for 20 min in six healthy volunteers. Before, during and 60 min after the infusion, we investigated regional cerebral blood flow (rCBF), cerebral blood...... volume (CBV), both estimated with SPECT, and blood flow velocity (BFV) in the middle cerebral artery (MCA), measured with transcranial Doppler. Headache was scored on a numerical verbal rating (0-10) scale. rCBF was unchanged, CBV was slightly increased (13%) during GTN infusion, whereas BFV decreased...... both during (20%) and 60 min (15%) after GTN. Headache was short-lived and maximal during infusion. This discrepancy of time-effect curves for the effect of GTN on headache and dilatation of MCA indicates that MCA is most likely not the primary source of pain in GTN-induced headache. The time...

  8. Antioxidant activity of organic extracts from aqueous infusions of sage.

    Science.gov (United States)

    Matsingou, Triantafillia Christina; Petrakis, Nicolaos; Kapsokefalou, Maria; Salifoglou, Athanasios

    2003-11-05

    The antioxidant activity of aqueous infusions of sage emerges from specific components present in that herb. In an attempt to investigate the chemical nature and properties of these components, four organic solvent extracts from aqueous infusions of sage were examined. HPLC analyses of these extracts led to the separation of a number of components, of which four were identified and quantified through the use of standard compounds of known chromatographic HPLC profiles. These compounds are the diterpenes carnosic acid, carnosol, and rosmanol and the hydroxycinnamic acid caffeic acid. The antioxidant activity and polyphenol content were determined in the four organic solvent extracts and the left-over aqueous fraction. Both polyphenolic and nonpolyphenolic substances present in the extracts arise as significant contributors to the observed antioxidant activity of the derived extracts and thus sage itself. In this sense, they reflect the antioxidant potential of the aqueous infusions of sage toward reactive oxygen species generated through variable mechanisms of iron-promoted oxidative processes.

  9. Radioprotection of the digestive tract by intravenous infusion of vasopressin

    Energy Technology Data Exchange (ETDEWEB)

    Juillard, G.J.F.; Peter, H.H.; Weisenburger, T.H.; Tesler, A.S.; Langdon, E.A.; Barenfus, M.; Lagasse, L.D.; Watring, W.E.; Smith, M.L.

    1975-09-01

    The effect of venous infusions of vasopressin during fractionated abdominal radiation exposures was evaluated in four pairs of dogs. In each pair, the control dog was given venous infusion of saline during irradiation. The results were analyzed from clinical observation, autopsy findings, and pathological examination. It appears that venous infusion of vasopressin has a definite and reproducible effect of radioprotection on the gastrointestinal tract, the dose modifying factor (DMF) being 1.5. Radiation therapy of the gynecologic malignancies would be one major application since the radiosensitivity of the intestinal tract is often a limiting factor in delivering high doses to the tumor, and further investigations are being done to study the effects of vasopressin on the radiosensitivity of malignant tumors.

  10. Determination of selected microelements in polish herbs and their infusions

    Energy Technology Data Exchange (ETDEWEB)

    Kalny, Piotr [Medical University of Warsaw, Department of Drugs Analysis, Banacha 1, 02-091 Warsaw (Poland); Fijalek, Zbigniew [Medical University of Warsaw, Department of Drugs Analysis, Banacha 1, 02-091 Warsaw (Poland); National Medicines Institute, Department of Pharmaceutical Chemistry, Chelmska 30/34, 00-725 Warsaw (Poland); Daszczuk, Anna [Medical University of Warsaw, Department of Drugs Analysis, Banacha 1, 02-091 Warsaw (Poland); Ostapczuk, Peter [Research Center of Juelich, Department of Safety and Radiation Protection, Leo-Brand Str. 1, D-52425 Juelich (Germany)]. E-mail: p.ostapczuk@fz-juelich.de

    2007-08-01

    Ba, Cd, Cr, Cu, Fe, Ni, Pb and Zn were determined in birch leaves (Folium Betulae), dandelion roots (Radix Taraxacae), hawthorn blossom (Inflorescentia Crataegi) and their infusions by graphite furnace atomic absorption spectrometry (GFAAS) after microwave digestion of plant samples. Infusions were made from herbs according to prescription for patients, provided by the producer of medicine on the package. The results obtained were compared with daily requirements for each element. Results show high content of cadmium in the medicinal plants analyzed. The highest level in infusions was observed for Ni and Zn (over 90% of the total element concentration for Ni and in most cases over 50% for Zn), and the lowest for Cd and Pb. The calculated daily intake of majority of the analyzed elements was very low (under 1% of daily requirements)

  11. Composition of antioxidants and amino acids in Stevia leaf infusions.

    Science.gov (United States)

    Periche, Angela; Koutsidis, Georgios; Escriche, Isabel

    2014-03-01

    Stevia, a non-caloric natural sweetener with beneficial properties and considerable antioxidants and amino acids, is increasingly consumed as an infusion. This work evaluates the influence of the conditions (temperature: 50, 70 or 90 °C and time: 1, 5, 20 or 40 min) applied to obtain Stevia infusions, on antioxidants (total phenols, flavonoids and antioxidant activity) and amino acids. The total concentration of the eleven amino acids found was 11.70 mg/g in dried leaves and from 6.84 to 9.11 mg/g per gram of Stevia in infusions. However, infusions showed higher levels of certain amino acids (alanine, asparagine, leucine and proline), and greater values of the three antioxidant parameters in comparison with dry leaves. Temperature had more influence (minimum values at 50 °C and maximum at 90 °C) than time in the case of antioxidants. At 90 °C there were no important increases in the extraction of antioxidant compounds after 5 min; each gram of Stevia had 117 mg trolox (total antioxidant activity), 90 mg gallic acid (total phenols) and 56 mg catechin equivalents (flavonoids). Varying the temperature and time conditions no notable differences were observed in the concentrations of the majority of amino acids. However, the infusion treatment at 90 °C for 5 min was the best, as it gave the highest yield of 8 of the 11 amino acids. Therefore, with respect to the compounds analyzed in this study, the best way to obtain Stevia leaf infusions is the same as the domestic process, almost boiling water for a short time.

  12. Supercritical CO2 interpolymer complex encapsulation improves heat stability of probiotic bifidobacteria

    CSIR Research Space (South Africa)

    Thantsha, MS

    2014-02-01

    Full Text Available the duration of the product's shelf life, various methods have been employed, among which encapsulation has received much interest. In line with exploitation of encapsulation for protection of probiotics against adverse conditions, we have previously...

  13. 40 CFR 180.1107 - Delta endotoxin of Bacillus thuringiensis variety kurstaki encapsulated into killed Pseudomonas...

    Science.gov (United States)

    2010-07-01

    ... thuringiensis variety kurstaki encapsulated into killed Pseudomonas fluorescens; exemption from the requirement... killed Pseudomonas fluorescens; exemption from the requirement of a tolerance. The delta endotoxin of Bacillus thuringiensis variety kurstaki encapsulated into killed Pseudomonas fluorescens is exempt from the...

  14. Management of encapsulating peritoneal sclerosis: a guideline on optimal and uniform treatment

    NARCIS (Netherlands)

    Habib, S. M.; Betjes, M. G. H.; Fieren, M. W. J. A.; Boeschoten, E. W.; Abrahams, A. C.; Boer, W. H.; Struijk, D. G.; Ruger, W.; Krikke, C.; Westerhuis, R.; de Sévaux, R. G. L.; van der Sande, F. M.; Gaasbeek, A.; Korte, M. R.; Steyerberg, E.; Lingsma, H.

    2011-01-01

    Encapsulating peritoneal sclerosis (EPS) represents a rare complication of long-term peritoneal dialysis (PD). It is characterised by diffuse peritoneal membrane fibrosis, progressive intestinal encapsulation and the clinical spectrum of intestinal obstruction. The pathogenesis is as yet not well

  15. Management of encapsulating peritoneal sclerosis : a guideline on optimal and uniform treatment

    NARCIS (Netherlands)

    Habib, S. M.; Betjes, M. G. H.; Fieren, M. W. J. A.; Boeschoten, E. W.; Abrahams, A. C.; Boer, W. H.; Struijk, D. G.; Ruger, W.; Krikke, C.; Westerhuis, R.; de Sevaux, R. G. L.; van der Sande, F. M.; Gaasbeek, A.; Korte, M. R.

    2011-01-01

    Encapsulating peritoneal sclerosis (EPS) represents a rare complication of long-term peritoneal dialysis (PD). It is characterised by diffuse peritoneal membrane fibrosis, progressive intestinal encapsulation and the clinical spectrum of intestinal obstruction. The pathogenesis is as yet not well

  16. Encapsulation method for atom probe tomography analysis of nanoparticles

    NARCIS (Netherlands)

    Larson, D.J.; Giddings, A.D.; Wub, Y.; Verheijen, M.A.; Prosa, T.J.; Roozeboom, F.; Rice, K.P.; Kessels, W.M.M.; Geiser, B.P.; Kelly, T.F.

    2015-01-01

    Open-space nanomaterials are a widespread class of technologically important materials that are generally incompatible with analysis by atom probe tomography (APT) due to issues with specimen preparation, field evaporation and data reconstruction. The feasibility of encapsulating such non-compact

  17. Biodegradation Potential of Oil-based Drill Cuttings Encapsulated ...

    African Journals Online (AJOL)

    Biodegradation potential of slabs made from oil-based drill cuttings encapsulated with cement in a soil environment has been experimentally investigated. Results of soil analyses show that physico-chemical and biological characteristics of the soil environment as; pH (5.6 – 3.9), temperature (27.7 – 39.5 oC), redox ...

  18. Co-encapsulation of tamoxifen and quercetin in polymeric nanoparticles

    DEFF Research Database (Denmark)

    Jain, Amit K; Thanki, Kaushik; Jain, Sanyog

    2013-01-01

    , and no measurable hepatotoxicity or oxidative stress was observed when measured as a function of respective biochemical markers in contrast to free drug(s) and their combinations. In a nutshell, the co-encapsulation strategy with PLGA-NPs could be a promising approach in improving oral delivery of Tmx and QT...... for cancer therapy....

  19. Process and system to encapsulate spent nuclear fuel

    International Nuclear Information System (INIS)

    Gunasekaran, Muthian; Fleischer, L.R.

    1980-01-01

    System for encapsulating spent nuclear fuel containing active fission matter and comprised in a metal casing, where concrete covers this casing in a contiguous, uniform and complete manner. It is characterized in that this concrete contains metal fibres to raise the thermal conductivity and polymers for increasing impermeability and that convection facilities are provided for cooling the outer surface of the concrete [fr

  20. Encapsulation of Essential Oils of Piper Nigrum and Monodora ...

    African Journals Online (AJOL)

    The essential oils of these plant materials were extracted using hydro-distillation method. The essential oil yield for was 2.40% while that of was 2.90%. The prepared gum Arabic was used to encapsulate the essential oils of the said plant materials ( and ) at an optimum in-feed concentration and to achieve maximum ...

  1. Preparation and in vitro evaluation of amoxicillin encapsulated in ...

    African Journals Online (AJOL)

    Purpose: To optimize and characterize amoxicillin encapsulated in mucoadhesive alginate-coated chitosan microparticles for the treatment of gastric and duodenal ulcers caused by Helicobacter pylori. Methods: Eighteen batches of various ratios of chitosan, sodium alginate and calcium chloride were prepared by ...

  2. Encapsulation of Capacitive Micromachined Ultrasonic Transducers Using Viscoelastic Polymer

    Science.gov (United States)

    Lin, Der-Song; Zhuang, Xuefeng; Wong, Serena H.; Kupnik, Mario; Khuri-Yakub, Butrus Thomas

    2010-01-01

    The packaging of a medical imaging or therapeutic ultrasound transducer should provide protective insulation while maintaining high performance. For a capacitive micromachined ultrasonic transducer (CMUT), an ideal encapsulation coating would therefore require a limited and predictable change on the static operation point and the dynamic performance, while insulating the high dc and dc actuation voltages from the environment. To fulfill these requirements, viscoelastic materials, such as polydimethylsiloxane (PDMS), were investigated for an encapsulation material. In addition, PDMS, with a glass-transition temperature below room temperature, provides a low Young's modulus that preserves the static behavior; at higher frequencies for ultrasonic operation, this material becomes stiffer and acoustically matches to water. In this paper, we demonstrate the modeling and implementation of the viscoelastic polymer as the encapsulation material. We introduce a finite element model (FEM) that addresses viscoelasticity. This enables us to correctly calculate both the static operation point and the dynamic behavior of the CMUT. CMUTs designed for medical imaging and therapeutic ultrasound were fabricated and encapsulated. Static and dynamic measurements were used to verify the FEM and show excellent agreement. This paper will help in the design process for optimizing the static and the dynamic behavior of viscoelastic-polymer-coated CMUTs. PMID:21170294

  3. Laboratory test of source encapsulation for decreasing PCB concentrations

    DEFF Research Database (Denmark)

    Kolarik, Barbara; Andersen, Helle Vibeke; Markowicz, Pawel

    2016-01-01

    This study investigates the effect of encapsulation of tertiary PCB sources with PERMASORB™ Adsorber Wallpaper and the surface emissions trap (cTrap) on indoor air concentration of PCBs and on the PCB content in the source. The 40 weeks long laboratory investigation shows reduction of the air con...

  4. Encapsulation of proteins into tunable and giant mesocage alumina.

    Science.gov (United States)

    El-Safty, Sherif A; Shenashen, Mohamed A; Ismael, Moahmed; Khairy, Mohamed

    2012-07-07

    Protein bioadsorption has rapidly attracted attention partially because of the promising advances in diagnostic assays, sensors, separations, and gene technology. Tunable and giant mesocage alumina cavities (5 nm to 20 nm) show capability in size-selective encapsulation and diffusivity of large proteins into interior pores.

  5. Biocatalysis with Sol-Gel Encapsulated Acid Phosphatase

    Science.gov (United States)

    Kulkarni, Suhasini; Tran, Vu; Ho, Maggie K.-M.; Phan, Chieu; Chin, Elizabeth; Wemmer, Zeke; Sommerhalter, Monika

    2010-01-01

    This experiment was performed in an upper-level undergraduate biochemistry laboratory course. Students learned how to immobilize an enzyme in a sol-gel matrix and how to perform and evaluate enzyme-activity measurements. The enzyme acid phosphatase (APase) from wheat germ was encapsulated in sol-gel beads that were prepared from the precursor…

  6. Nutritional value of micro-encapsulated fish oils in rats

    DEFF Research Database (Denmark)

    Rosenquist, Annemette; Hølmer, Gunhild Kofoed

    1996-01-01

    The nutritional value of a micro-encapsulated fish oil product has been investigated. Three groups of 10 male Wistar rats each were fed dietscontaining 20% (w/w) of fat, and only the type and form of the fat added was different. In the test groups 5% (w/w) of fish oil either as such or in amicro...

  7. Synthesis of carbon-encapsulated metal nanoparticles from wood char

    Science.gov (United States)

    Yicheng Du; Chuji Wang; Hossein Toghiani; Zhiyong Cai; Xiaojian Liu; Jilei Zhang; Qiangu Yan

    2010-01-01

    Carbon-encapsulated metal nanoparticles were synthesized by thermal treatment of wood char, with or without transition metal ions pre-impregnated, at 900ºC to 1,100ºC. Nanoparticles with concentric multilayer shells were observed. The nanoparticles were analyzed by scanning electron microscopy, transmission electron microscopy (TEM), X-ray diffraction...

  8. A problem encapsulated - role of CT | Mishra | Libyan Journal of ...

    African Journals Online (AJOL)

    Sclerosing encapsulating peritonitis (SEP) is a rare but serious complication of abdominal surgery, recurrent peritonitis, and continuous ambulatory peritoneal dialysis with a high morbidity and mortality. The etiology of this condition is largely unknown. Diagnosis is usually established at laparotomy in patients with recurrent ...

  9. Truly Nonionic Polymer Shells for the Encapsulation of Living Cells

    Science.gov (United States)

    2011-07-04

    successfully been encapsulated using LbL assembly include stem cells, bacteria , bacteria spores, pancreatic islets, and plate- lets.[49–54] The use...cerevisiae YPH501 diploid yeast strain expressing yEGFP (yeast-enhanced GFP) were used for this study.[39] Cells were cultured in synthetic minimal medium

  10. Encapsulation pilot plant of radioactive wastes in thermosetting resins

    International Nuclear Information System (INIS)

    1982-01-01

    The thermosetting resins (polyesters, epoxides) are used to encapsulate the low and intermediate - level radioactive wastes. The testing program concerning the drums produced by the pilot plant of the Chooz nuclear power plant is described. The installation operating is examined while thinking of the industrial application. The production costs are then evaluated

  11. Hepatitis Virus Capsid Polymorph Stability Depends on Encapsulated Cargo Size

    NARCIS (Netherlands)

    He, L.; Porterfield, Z.; van der Schoot, P. P. A. M.|info:eu-repo/dai/nl/102140618; Zlotnick, A.; Dragnea, B.

    2013-01-01

    Protein cages providing a controlled environment to encapsulated cargo are a ubiquitous presence in any biological system. Well-known examples are capsids, the regular protein shells of viruses, which protect and deliver the viral genome. Since some virus capsids can be loaded with nongenomic

  12. Preparation and characterization of graphene oxide encapsulated gold nanoparticles.

    Science.gov (United States)

    Yun, Yong Ju; Song, Ki-Bong

    2013-11-01

    We present a simple approach for the fabrication of graphene oxide-encapsulated gold nanoparticles using graphene oxide sheet-wrapping via electrostatic self-assembly. By mixing bovine serum albumin molecule-functionalized gold nanoparticles with graphene oxide dispersion, positively charged bovine serum albumin/gold nanoparticles easily assembled with negatively charged graphene oxide sheets through electrostatic interaction. Transmittance electron microscopy, scanning electron microscopy, atomic force microscopy, and Raman spectroscopy were used to confirm the encapsulation of graphene oxide on gold nanoparticles. Interestingly, graphene oxide sheets wrapping mainly occurs along the main body of single or a few gold nanoparticles. Additionally, by measuring the ultraviolet-visible spectroscopy spectrum, we found that the surface plasmon resonances band of the graphene oxide-encapsulated gold nanoparticles was found to become red-shifted compared to that of pristine gold nanoparticles, whereas similar to that of bovine serum albumin-coated gold nanoparticles. These results indicating that most of graphene oxide-encapsulated gold nanoparticles have good monodispersity and spherical shape. These resulting materials may potentially serve as a platform for plasmon resonance electron transfer spectroscopy or a probe for low level biosensing.

  13. Effect of encapsulation technology on organic light emitting diode lifetime

    Science.gov (United States)

    Zhong, Jian; Gao, Zhuo; Gao, Juan; Dai, Ke; Chen, Jiule

    2012-03-01

    A kind of green organic light-emitting diodes (OLED) was prepared via vacuum thermal evaporation, of which the multilayer structure was indium-tin oxide (ITO)/copper-phthalocyanine (CuPc) (200 Å)/ N,N'-bis(1-naphthyl)- N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine ( α-NPD) (600 Å)/ N'-diphenyl- N,N'-tris(8-hydroxyquinoline) aluminium (Alq3) (400 Å):10-(2-benzothiazolyl)-1,1,7,7-tetramethyl-2,3,6,7-tetrahydro-1 H,5 H,11 H-(l)benzopyropyrano(6,7,8- i, j)quinolizin-11-one (C545T) (2%)/Alq3 (200 Å)/LiF (10 Å)/Al (1000 Å). And we used both traditional glass encapsulation and thin film encapsulation (TFE) technologies to protect the device, reducing impact of vapor and oxygen. Organic film offered an excellent surface morphology, while inorganic film was nearly a perfect barrier to vapor and oxygen. Both of them constituted the encapsulation unit of TFE. According to the results of acceleration life test, the operation lifetime of device using TFE was 22% less than that of device using traditional glass cap encapsulation. So, the technology of TFE should be optimized further, and the quality of TFE needs a great improvement. There is a long way to go and a lot of hard work before realizing flexible display with OLED, but the dream will be true one day.

  14. Biomedical applications of ferulic acid encapsulated electrospun nanofibers.

    Science.gov (United States)

    Vashisth, Priya; Kumar, Naresh; Sharma, Mohit; Pruthi, Vikas

    2015-12-01

    Ferulic acid is a ubiquitous phytochemical that holds enormous therapeutic potential but has not gained much consideration in biomedical sector due to its less bioavailability, poor aqueous solubility and physiochemical instability. In present investigation, the shortcomings associated with agro-waste derived ferulic acid were addressed by encapsulating it in electrospun nanofibrous matrix of poly (d,l-lactide-co-glycolide)/polyethylene oxide. Fluorescent microscopic analysis revealed that ferulic acid predominantly resides in the core of PLGA/PEO nanofibers. The average diameters of the PLGA/PEO and ferulic acid encapsulated PLGA/PEO nanofibers were recorded as 125 ± 65.5 nm and 150 ± 79.0 nm, respectively. The physiochemical properties of fabricated nanofibers are elucidated by IR, DSC and NMR studies. Free radical scavenging activity of fabricated nanofibers were estimated using di(phenyl)-(2,4,6-trinitrophenyl)iminoazanium (DPPH) assay. 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay confirmed the cytotoxicity of ferulic acid encapsulated nanofibers against hepatocellular carcinoma (HepG2) cells. These ferulic acid encapsulated nanofibers could be potentially explored for therapeutic usage in biomedical sector.

  15. Methanation of CO2 over Zeolite-Encapsulated Nickel Nanoparticles

    DEFF Research Database (Denmark)

    Goodarzi, Farnoosh; Kang, Liqun; Wang, Feng Ryan

    2018-01-01

    Efficient methanation of CO2 relies on the development of more selective and stable heterogeneous catalysts. Here we present a simple and effective method to encapsulate Ni nanoparticles in zeolite silicalite-1. In this method, the zeolite is modified by selective desilication, which creates intr...... Ni h-1. The encapsulated Ni nanoparticles show no change in activity or selectivity after 50 h of operation, although post-catalysis characteri-sation reveals some particle migration.......Efficient methanation of CO2 relies on the development of more selective and stable heterogeneous catalysts. Here we present a simple and effective method to encapsulate Ni nanoparticles in zeolite silicalite-1. In this method, the zeolite is modified by selective desilication, which creates intra......-particle voids and mesopores that facilitate the formation of small and well-dispersed nanoparticles upon impregnation and reduction. TEM and XPS analysis confirm that a significant part of the Ni nanoparticles are situated inside the zeolite rather than on the outer surface. The encapsulation results...

  16. Photostability effect of silica nanoparticles encapsulated fluorescence dye

    Science.gov (United States)

    Ahmad, Atiqah; Zakaria, Nor Dyana; Razak, Khairunisak Abdul

    2017-12-01

    Fluorescence dyes are based on small organic molecules have become of interest in chemical biology and widely used for cell and intracellular imaging. However, fluorescence dyes have limitations such as photo bleaching, poor photochemical stability and has a short Stokes shift. It is less valuable for long-term cell tracking strategies and has very short lifetime. In order to overcome the problems, dye-incorporated nanomaterials become of interest. Nanomaterials encapsulation provides a protection layer around the fluorescence dye which improves the stability of fluorescence dye. In this study, silica nanoparticles encapsulated with 1,1%-dioctadecyl-3,3,3%,3%-tetramethylindocarbocyanine perchlorate (Dil) was successfully synthesised by using micelle entrapment method to investigate the effect of encapsulation of nanoparticles towards the properties of fluorescent dye. The synthesised nanoparticles (SiDil) was characterised by particle size analyser, Transmission Electron Microscopy (TEM), UV-Vis spectrometer and Fluorescent spectrometer. Observation using TEM showed spherical shape of nanoparticles with 53 nm diameter. Monodispersed and well nanoparticles distribution was confirmed by low polydispersity index of 0.063 obtained by particle size analyser. Furthermore, the photoluminescence properties of the SiDil were evaluated and compared with bare Dil dye. Both SiDil and bare Dil was radiated under 200 W of Halogen lamp for 60 minutes and the absorbance intensity was measured using UV-Vis spectrometer. The result showed more stable absorbance intensity for SiDil compared to bare Dil dye, which indicated that Si nanoparticles encapsulation improved the photostability property.

  17. Degradation of thermally-cured silicone encapsulant under terrestrial UV

    Energy Technology Data Exchange (ETDEWEB)

    Cai, Can; Miller, David C.; Tappan, Ian A.; Dauskardt, Reinhold H.

    2016-12-01

    Concentrator photovoltaic (CPV) modules operate in extreme conditions, including enhanced solar flux, elevated operating temperature, and frequent thermal cycling. Coupled with active environmental species such as oxygen and moisture, the operating conditions pose a unique materials challenge for guaranteeing operational lifetimes of greater than 25 years. Specifically, the encapsulants used in the optical elements are susceptible to environmental degradation during operation. For example, the interfaces must remain in contact to prevent optical attenuation and thermal runaway. We developed fracture mechanics based metrologies to characterize the adhesion of the silicone encapsulant and its adjacent surfaces, as well as the cohesion of the encapsulant. Further, we studied the effects of weathering on adhesion using an outdoor concentrator operating in excess of 1100 times the AM1.5 direct irradiance and in indoor environmental chambers with broadband ultraviolet (UV) irradiation combined with controlled temperature and humidity. We observed a sharp initial increase in adhesion energy followed by a gradual decrease in adhesion as a result of both outdoor concentrator exposure and indoor UV weathering. We characterized changes in mechanical properties and chemical structures using XPS, FTIR, and DMA to understand the fundamental connection between mechanical strength and the degradation of the silicone encapsulant. We developed physics based models to explain the change in adhesion and to predict operational lifetimes of the materials and their interfaces.

  18. Next-generation ionomer encapsulants for thin film technology

    Science.gov (United States)

    Czyzewicz, Robin; Smith, C. Anthony

    2011-09-01

    The characteristic properties of newly developed ionomer-based encapsulants are highlighted along with an in-depth analysis of moisture ingress, electrical and mechanical properties. The mechanical properties of these encapsulants with their high stiffness and strength have been found to allow the use of thinner glass and a possible shift from tempered to annealed glass. Lower-cost mounting options may be explored through full-module stress/deflection measurement capability and competencies developed in world-class finite-element modeling of system parameters. The superior electrical and moisture properties may allow modules to be produced without the use of an additional edge seal. These new materials have improved melt flow properties when compared to other encapsulant families such as EVA or PVB. This allows for faster processing which reduces production cost by shortening the lamination cycle. During the lamination process the sheets show excellent dimensional stability and low shrinkage behavior; and there is no need for curing, thus energy costs are lower due to lower lamination temperature. As advancement of technology proceeds across the entire PV industry, next generation ionomer encapsulants have been developed to keep up with the pace.

  19. Encapsulation of antitumor drug methotrexate in liposome vesicles

    International Nuclear Information System (INIS)

    Xu Bo; Sun Qixun; Zhang Nianbao; Xie Binghua; Zhang Jiong

    1990-01-01

    Liposome vesicles containing antitumor drug methotrexate (MTX) were prepared. MTX was labelled by the tritium ion beam method. After purification by TLC, the specific radioactivity of 3 H-MTX was 1.19 GBq/mmol with radiochemical purity orver 95%. Under various forming conditions of liposome vesicles, the efficiency of encapsulation was 21-53%

  20. Modelling the Energetics of Encapsulation of Atoms and Atomic ...

    Indian Academy of Sciences (India)

    user

    2015-07-04

    July 4, 2015. Mid-year Meeting of Indian Academy of Sciences. 2. Encapsulation of atoms, clusters and molecules into carbon nanotubes: Why is it important? Carbon Nanotubes. (Discovery in 1991). Sumio Iijima. Animation Courtesy: Dr. Maruyama's CNT site. R. 0. Large aspect ratios. Precisely defined nanometer sized ...

  1. VESICLE-ENCAPSULATED CORTICOSTEROIDS FOR THE TREATMENT OF CANCER

    NARCIS (Netherlands)

    Schiffelers, Raymond M.; Metselaar, J.M.; Molema, Grietje; Storm, Gerrit

    2004-01-01

    The invention relates to the use of a composition comprising a corticosteroid encapsulated in a vesicle for the manufacture of a medicament for treating cancer, such as the use of a composition comprising a corticosteroid and liposomes, the liposomes comprising a non-charged vesicle-forming lipid,

  2. Vesicle-encapsulated corticosteroids for the treatment of cancer

    NARCIS (Netherlands)

    Schiffelers, Raymond M.; Metselaar, J.M.; Molema, Grietje; Storm, Gerrit

    2005-01-01

    The invention relates to the use of a composition comprising a corticosteroid encapsulated in a vesicle for the manufacture of a medicament for treating cancer, such as the use of a composition comprising a corticosteroid and liposomes, the liposomes comprising a non-charged vesicle-forming lipid

  3. Multiple renal anomalies associated with encapsulated swellings of ...

    African Journals Online (AJOL)

    The current observation reports the occurrence of the left renal anomalies and encapsulated swellings involving the left sciatic nerve in a 47 years old male cadaver. Renal anomalies consisted of left double kidney, left bifid ureter and double arterial supply to the left kidney. The double kidney consisted of the two upper and ...

  4. Ordered phases of encapsulated diamondoids into carbon nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Legoas, S B [Departamento de Fisica, CCT, Universidade Federal de Roraima, 69304-000, Boa Vista, Roraima (Brazil); Dos Santos, R P B; Troche, K S; Galvao, D S [Instituto de Fisica ' Gleb Wataghin' , Universidade Estadual de Campinas, 13083-970, Campinas, Sao Paulo (Brazil); Coluci, V R, E-mail: paupitz@ifi.unicamp.br [Faculdade de Tecnologia, Universidade Estadual de Campinas, 13484-332, Limeira, Sao Paulo (Brazil)

    2011-08-05

    Diamondoids are hydrogen-terminated nanosized diamond fragments that are present in petroleum crude oil at low concentrations. These fragments are found as oligomers of the smallest diamondoid, adamantane (C{sub 10}H{sub 16}). Due to their small size, diamondoids can be encapsulated into carbon nanotubes to form linear arrangements. We have investigated the encapsulation of diamondoids into single walled carbon nanotubes with diameters between 1.0 and 2.2 nm using fully atomistic simulations. We performed classical molecular dynamics and energy minimizations calculations to determine the most stable configurations. We observed molecular ordered phases (e.g. double, triple, 4- and 5-stranded helices) for the encapsulation of adamantane, diamantane, and dihydroxy diamantane. Our results also indicate that the functionalization of diamantane with hydroxyl groups can lead to an improvement on the molecular packing factor when compared to non-functionalized compounds. Comparisons to hard-sphere models revealed differences, especially when more asymmetrical diamondoids were considered. For larger diamondoids (i.e., adamantane tetramers), we have not observed long-range ordering but only a tendency to form incomplete helical structures. Our calculations predict that thermally stable (at least up to room temperature) complex ordered phases of diamondoids can be formed through encapsulation into carbon nanotubes.

  5. Characterization of Epoxy Composites Reinforced with Wax Encapsulated Microcrystalline Cellulose

    Directory of Open Access Journals (Sweden)

    Yuanfeng Pan

    2016-11-01

    Full Text Available The effect of paraffin wax encapsulated microcrystalline cellulose (EMC particles on the mechanical and physical properties of EMC/epoxy composites were investigated. It was demonstrated that the compatibility between cellulose and epoxy resin could be maintained due to partial encapsulation resulting in an improvement in epoxy composite mechanical properties. This work was unique because it was possible to improve the physical and mechanical properties of the EMC/epoxy composites while encapsulating the microcrystalline cellulose (MCC for a more homogeneous dispersion. The addition of EMC could increase the stiffness of epoxy composites, especially when the composites were wet. The 1% EMC loading with a 1:2 ratio of wax:MCC demonstrated the best reinforcement for both dry and wet properties. The decomposition temperature of epoxy was preserved up to a 5% EMC loading and for different wax:MCC ratios. An increase in wax encapsulated cellulose loading did increase water absorption but overall this absorption was still low (<1% for all composites.

  6. Radiation resistance of microorganisms on unsterilized infusion sets

    DEFF Research Database (Denmark)

    Christensen, E. Ahrensburg; Kristensen, H.; Hoborn, J.

    1991-01-01

    Three different methods were used for detecting and isolating microorganisms with high radiation resistance from the microbial contamination on infusion sets prior to sterilization. By all three methods, microorganisms with a radiation resistance high enough to be a critical factor in a steriliza......Three different methods were used for detecting and isolating microorganisms with high radiation resistance from the microbial contamination on infusion sets prior to sterilization. By all three methods, microorganisms with a radiation resistance high enough to be a critical factor...

  7. Studies of irradiation sterilization for single infusion device

    International Nuclear Information System (INIS)

    Chen Ruyan; Wang Keqin; Lu Zongmeng; Xiao Fenyuan; Xie Meizhi

    1988-05-01

    In practice of irradiation sterilization for single infusion device, object bacteria were selected and then their radiosensitivity were tested on the basis of practical production and irradiation environment. In view of the cylinder source and the static irradiation form, the dose rate of irradiation field and the dose distribution and uniformity in product box were measured in order to control sterilization quality. Through the measurements of material properties for irradiated infusion device and the test of causing rabbit fever as well as the survey of clinical practice, it was verified that the irradiation apparatus, the irradiation process and the product material etc. can satisfy the demands of sterilixzation and praction

  8. Effects of different encapsulation agents and drying process on stability of betalains extract

    OpenAIRE

    Ravichandran, Kavitha; Palaniraj, Ravichandran; Saw, Nay Min Min Thaw; Gabr, Ahmed M. M.; Ahmed, Abdelrahman R.; Knorr, Dietrich; Smetanska, Iryna

    2012-01-01

    Red beet plants are rich in betalains that can be used as food natural colorants. Betalains were extracted from red beet and encapsulated with different carrier agents and freeze or spray dried. Effect of different encapsulating agents as maltodextrin, guar gum, gum Arabic, pectin and xanthan gum with different concentration (as encapsulating agents) were studied on the betalain stability. Encapsulated betalains with xanthan gum with maltodextrin showed about 65 % more recovery than the contr...

  9. Imaging features of encapsulating peritoneal sclerosis in continuous ambulatory peritoneal dialysis patients.

    LENUS (Irish Health Repository)

    Ti, Joanna P

    2010-07-01

    OBJECTIVE: The purpose of this article is to present the spectrum of radiologic findings of encapsulating peritoneal sclerosis in patients undergoing continuous ambulatory peritoneal dialysis (CAPD). CONCLUSION: Although a rare diagnosis, encapsulating peritoneal sclerosis in patients undergoing CAPD has a high morbidity and mortality. Diagnosis is often delayed because clinical features are insidious and nonspecific. Radiologic imaging may be helpful in the early diagnosis of encapsulating peritoneal sclerosis and in facilitating timely intervention for CAPD patients with encapsulating peritoneal sclerosis.

  10. Selection of High Strength Encapsulant for MEMS Devices Undergoing High Pressure Packaging

    OpenAIRE

    Hamzah, A.A.; Husaini, Y.; Majlis, B.Y.; Ahmad, I.

    2007-01-01

    Submitted on behalf of EDA Publishing Association (http://irevues.inist.fr/EDA-Publishing); International audience; Deflection behavior of several encapsulant materials under uniform pressure was studied to determine the best encapsulant for MEMS device. Encapsulation is needed to protect movable parts of MEMS devices during high pressure transfer molded packaging process. The selected encapsulant material has to have surface deflection of less than 5 ?m under 100 atm vertical loading. Deflec...

  11. Delivery interaction between co-infused medications: an in vitro modeling study of microinfusion.

    Science.gov (United States)

    Tsao, Amy C; Lovich, Mark A; Parker, Michael J; Zheng, Hui; Peterfreund, Robert A

    2013-01-01

    To test the hypothesis that steady-state drug delivery by continuous infusion is predictably affected by a second drug infusion in the same lumen. Clinicians commonly administer two drugs by continuous infusion through one central venous catheter lumen (co-infusion). To limit fluid delivery, low flow rate carriers transport concentrated drug solutions; a method called microinfusion. How microinfusion delivery of one drug is affected by a second drug infusion has not been explored. Two water-soluble dyes, tartrazine and erioglaucine, infused at 3 ml · h(-1), modeled drug delivery through a four stopcock linear manifold and catheter lumen. A pump drove a carrier fluid (10 ml · h(-1)). After tartrazine reached steady-state delivery, erioglaucine entered downstream or upstream of the tartrazine infusion. Quantitative spectrophotometry measured dye delivery. Starting erioglaucine's infusion upstream of tartrazine's entry caused a transient tartrazine bolus (duration 10 min, peak drug delivery 20% higher than target levels). Starting erioglaucine's infusion downstream produced a similar amplitude, briefer, bolus. Stopping the erioglaucine infusion caused a transient reduction in tartrazine delivery. Measured delivery profiles were comparable to prediction models. We confirmed the hypothesis that delivery of one infused drug is transiently affected by starting or stopping a second drug infusion in the same line. The magnitude of the changes can be estimated quantitatively. The clinical impact depends on the drugs being co-infused and patient sensitivity, but could be clinically important; the findings have safety implications for infused medication delivery to critically ill or anesthetized children. We recommend minimizing infusion system dead volumes, connecting the most essential infusion(s) to the main fluid pathway as close as possible to the patient, and recognizing the potential for unintended alterations in delivery when multiple drugs co-infuse. © 2012

  12. An experimental study on the influence of infusion speed on the early mechanism of embolic effect of arterially infused absolute Ethanol in the rat

    International Nuclear Information System (INIS)

    Han, Joon Koo; Kim, Woo Ho; Lee, Byung Hee; Park, Kil Sun; Park, Jae Hyung; Kim, Chu Wan; Han, Man Chung

    1990-01-01

    In order to clarify the early mechanism of action of the tissue necrosis induced by intraarterially infused absolute ethanol, abdominal aortography and histopathologic examination after absolute ethanol infusion into aorta at fast (0.4ml/sec) and slow speed (0.04ml/sec) were performed on 22 rats (2 controls, 7 in fast infusion group, 7 in slow infusion group, 3 in fast and 3 in slow infusion groups during aorta compression, respectively). Histopathologic features under the light and scanning electron microscope were correlated with the angiographic findings within 30 minutes after ethanol infusion. The results are as follows : 1. In fast infusion group, histopathologic examination of the kidney showed severe glomerular and tubular damage. Extensive damage on endothelial and medial layer was noted in arteries, and fresh thrombi originated from the damaged arterial wall were seen. 2. Angiographic findings in the fast infusion group were luminal irregularity and early obstruction of large arteries. And circulation time was prolonged. 3. In slow infusion group, histopathologic examination of the kidney showed focal area of severe glomerular and tubular damage on relatively normal background. Endothelial and muscular damage was noted in arteries, but the degree of the damage was less severe than that of the fast infusion group. 4. Angiographic findings in the slow infusion group were focal perfusion defect of the kidney, delayed circulation time, and mild luminal irregularity, but obstruction of the major arteries was not seen

  13. Examination of an optical transmittance test for photovoltaic encapsulation materials

    Energy Technology Data Exchange (ETDEWEB)

    Miller, David C.; Bengoechea, Jaione; Bokria, Jayesh G.; Köhl, Michael; Powell, Nick E.; Smith, Michael E.; White, Michael D.; Wilson, Helen Rose; Wohlgemuth, John H.; Dhere, Neelkanth G.; Wohlgemuth, John H.; Lynn, Kevin W.

    2013-09-24

    The optical transmittance of encapsulation materials is a key characteristic for their use in photovoltaic (PV) modules. Changes in transmittance with time in the field affect module performance, which may impact product warranties. Transmittance is important in product development, module manufacturing, and field power production (both immediate and long-term). Therefore, an international standard (IEC 62788-1-4) has recently been proposed by the Encapsulation Task-Group within the Working Group 2 (WG2) of the International Electrotechnical Commission (IEC) Technical Committee 82 (TC82) for the quantification of the optical performance of PV encapsulation materials. Existing standards, such as ASTM E903, are general and more appropriately applied to concentrated solar power than to PV. Starting from the optical transmittance measurement, the solar-weighted transmittance of photon irradiance, yellowness index (which may be used in aging studies to assess durability), and ultraviolet (UV) cut-off wavelength may all be determined using the proposed standard. The details of the proposed test are described. The results of a round-robin experiment (for five materials) conducted at seven laboratories to validate the test procedure using representative materials are also presented. For example, the Encapsulation Group actively explored the measurement requirements (wavelength range and resolution), the requirements for the spectrophotometer (including the integrating sphere and instrument accessories, such as a depolarizer), specimen requirements (choice of glass-superstrate and -substrate), and data analysis (relative to the light that may be used in the PV application). The round-robin experiment identified both intra- and inter-laboratory instrument precision and bias for five encapsulation materials (encompassing a range of transmittance and haze-formation characteristics).

  14. Encapsulation and handling of spent nuclear fuel for final disposal

    International Nuclear Information System (INIS)

    Loennerberg, B.; Larker, H.; Ageskog, L.

    1983-05-01

    The handling and embedding of those metal parts which arrive to the encapsulation station with the fuel is described. For the encapsulation of fuel two alternatives are presented, both with copper canisters but with filling of lead and copper powder respectively. The sealing method in the first case is electron beam welding, in the second case hot isostatic pressing. This has given the headline of the two chapters describing the methods: Welded copper canister and Pressed copper canister. Chapter 1, Welded copper canister, presents the handling of the fuel when it arrives to the encapsulation station, where it is first placed in a buffer pool. From this pool the fuel is transferred to the encapsulation process and thereby separated from fuel boxes and boron glass rod bundles, which are transported together with the fuel. The encapsulation process comprises charging into a copper canister, filling with molten lead, electron beam welding of the lid and final inspection. The transport to and handling in the final repository are described up to the deposition and sealing in the deposition hole. Handling of fuel residues is treated in one of the sections. In chapter 2, Pressed copper canister, only those parts of the handling, which differ from chapter 1 are described. The hot isostatic pressing process is given in the first sections. The handling includes drying, charging into the canister, filling with copper powder, seal lid application and hot isostatic pressing before the final inspection and deposition. In the third chapter, BWR boxes in concrete moulds, the handling of the metal parts, separated from the fuel, are dealt with. After being lifted from the buffer pool they are inserted in a concrete mould, the mould is filled with concrete, covered with a lid and after hardening transferred to its own repository. The deposition in this repository is described. (author)

  15. A chemically stable PVD multilayer encapsulation for lithium microbatteries

    International Nuclear Information System (INIS)

    Ribeiro, J F; Sousa, R; Cunha, D J; Vieira, E M F; Goncalves, L M; Silva, M M; Dupont, L

    2015-01-01

    A multilayer physical vapour deposition (PVD) thin-film encapsulation method for lithium microbatteries is presented. Lithium microbatteries with a lithium cobalt oxide (LiCoO 2 ) cathode, a lithium phosphorous oxynitride (LiPON) electrolyte and a metallic lithium anode are under development, using PVD deposition techniques. Metallic lithium film is still the most common anode on this battery technology; however, it presents a huge challenge in terms of material encapsulation (lithium reacts with almost any materials deposited on top and almost instantly begins oxidizing in contact with atmosphere). To prove the encapsulation concept and perform all the experiments, lithium films were deposited by thermal evaporation technique on top of a glass substrate, with previously patterned Al/Ti contacts. Three distinct materials, in a multilayer combination, were tested to prevent lithium from reacting with protection materials and atmosphere. These multilayer films were deposited by RF sputtering and were composed of lithium phosphorous oxide (LiPO), LiPON and silicon nitride (Si 3 N 4 ). To complete the long-term encapsulation after breaking the vacuum, an epoxy was applied on top of the PVD multilayer. In order to evaluate oxidation state of lithium films, the lithium resistance was measured in a four probe setup (cancelling wires/contact resistances) and resistivity calculated, considering physical dimensions. A lithium resistivity of 0.16 Ω μm was maintained for more than a week. This PVD multilayer exonerates the use of chemical vapour deposition (CVD), glove-box chambers and sample manipulation between them, significantly reducing the fabrication cost, since battery and its encapsulation are fabricated in the same PVD chamber. (paper)

  16. A chemically stable PVD multilayer encapsulation for lithium microbatteries

    Science.gov (United States)

    Ribeiro, J. F.; Sousa, R.; Cunha, D. J.; Vieira, E. M. F.; Silva, M. M.; Dupont, L.; Goncalves, L. M.

    2015-10-01

    A multilayer physical vapour deposition (PVD) thin-film encapsulation method for lithium microbatteries is presented. Lithium microbatteries with a lithium cobalt oxide (LiCoO2) cathode, a lithium phosphorous oxynitride (LiPON) electrolyte and a metallic lithium anode are under development, using PVD deposition techniques. Metallic lithium film is still the most common anode on this battery technology; however, it presents a huge challenge in terms of material encapsulation (lithium reacts with almost any materials deposited on top and almost instantly begins oxidizing in contact with atmosphere). To prove the encapsulation concept and perform all the experiments, lithium films were deposited by thermal evaporation technique on top of a glass substrate, with previously patterned Al/Ti contacts. Three distinct materials, in a multilayer combination, were tested to prevent lithium from reacting with protection materials and atmosphere. These multilayer films were deposited by RF sputtering and were composed of lithium phosphorous oxide (LiPO), LiPON and silicon nitride (Si3N4). To complete the long-term encapsulation after breaking the vacuum, an epoxy was applied on top of the PVD multilayer. In order to evaluate oxidation state of lithium films, the lithium resistance was measured in a four probe setup (cancelling wires/contact resistances) and resistivity calculated, considering physical dimensions. A lithium resistivity of 0.16 Ω μm was maintained for more than a week. This PVD multilayer exonerates the use of chemical vapour deposition (CVD), glove-box chambers and sample manipulation between them, significantly reducing the fabrication cost, since battery and its encapsulation are fabricated in the same PVD chamber.

  17. Infusing Adlerian Theory into an Introductory Marriage and Family Course.

    Science.gov (United States)

    LaFountain, Rebecca M.; Mustaine, Beverly L.

    1998-01-01

    Important contributions of "Individual Psychology" to marriage and family counseling are examined. Through "open forum family counseling," a framework is provided for infusing these ideas into training family practitioners. Key concepts, assessment techniques, strategies to help individuals understand their own family of…

  18. Fluoride in black and green tea ( Camellia sinensis ) infusions in ...

    African Journals Online (AJOL)

    The fluoride contents in the infusions of 21 commercially available Ethiopian and imported black and green tea brands; in leaf and bag forms was determined by a fluoride ion-selective electrode method. Of the samples analyzed twelve were products from Ethiopia and the remaining nine were imported tea brands.

  19. Physical and chemical properties of selected beef muscles infused ...

    African Journals Online (AJOL)

    In the present investigation, the biceps femoris (BF, silverside), rectus femoris muscle (RF), semitendinosus muscle (ST, eye of the silverside), supraspinatus muscle (SS, scotch fillet) and longissimus et lumborum muscles from the left side of beef carcasses were infused, 3 d post mortem, with a blend consisting of various ...

  20. Development of a Multidisciplinary Middle School Mathematics Infusion Model

    Science.gov (United States)

    Russo, Maria; Hecht, Deborah; Burghardt, M. David; Hacker, Michael; Saxman, Laura

    2011-01-01

    The National Science Foundation (NSF) funded project "Mathematics, Science, and Technology Partnership" (MSTP) developed a multidisciplinary instructional model for connecting mathematics to science, technology and engineering content areas at the middle school level. Specifically, the model infused mathematics into middle school curriculum…

  1. Duodenal infusion of donor feces for recurrent Clostridium difficile

    NARCIS (Netherlands)

    van Nood, Els; Vrieze, Anne; Nieuwdorp, Max; Fuentes, Susana; Zoetendal, Erwin G.; de Vos, Willem M.; Visser, Caroline E.; Kuijper, Ed J.; Bartelsman, Joep F. W. M.; Tijssen, Jan G. P.; Speelman, Peter; Dijkgraaf, Marcel G. W.; Keller, Josbert J.

    2013-01-01

    Recurrent Clostridium difficile infection is difficult to treat, and failure rates for antibiotic therapy are high. We studied the effect of duodenal infusion of donor feces in patients with recurrent C. difficile infection. We randomly assigned patients to receive one of three therapies: an initial

  2. [Diuretic activity of the infusion of flowers from Lavandula officinalis].

    Science.gov (United States)

    Elhajili, M; Baddouri, K; Elkabbaj, S; Meiouat, F; Settaf, A

    2001-01-01

    The diuretic activity of an infusion of Lavandula officinalis was studied in the Wistar rat. Thus, the kinetics of hydroelectrolytic elimination in response to the oral administration of an infusion of pharmaceutical lavender flowers were measured in the rats. Experiments were completed under similar conditions using a synthetic pharmacological diuretic, Diamox. The aqueous extract of this aromatic plant accelerated the elimination of the water overload. At the peak of the diuretic response, urinary osmolarity was significantly less than that of controls (111+/-14 vs. 195+/-11 mosmol x kg(-1)). Sodium excretion was moderate following administration of the infusion when compared to the synthetic diuretic. The stability of the aldosterone concentrations in the plasma and the absence of correlation with plasma sodium concentrations, coupled with the observed clearance of the free water (0.055+/-0.007 vs. 0.045+/-0.012 mL x min(-1)) show that the increase in diuresis and the moderate increase in sodium excretion are of tubular origin. The result of the phytochemical analysis of hexane extracts in the infusion and in urine indicated that four or five chemical factors may be involved in the diuretic effect of lavender.

  3. The effects of incisional bupivacaine infusions on postoperative ...

    African Journals Online (AJOL)

    Background: The aim of this study was to determine opioid requirements and pain intensity scores in patients after a total abdominal hysterectomy (TAH) administered with a bupivacaine infusion for a 30-hour period, and then to compare the data with that of a control group. Method: This was a prospective, parallel, ...

  4. Effects of Psidium guajava Leaf Infusion on Streptococci viridans

    Directory of Open Access Journals (Sweden)

    Hing Yi Chen

    2016-09-01

    Full Text Available Background: Dental caries is recognized as the most important oral burden. It is caused by the formation of lactate acid formed through reaction of bacteria and carbohydrates. Streptococci viridans has been proven as the primary etiologic agents for dental caries. Low accessibility in oral care services leads the Indonesian community to use plants in order to prevent dental caries. One of those plants is Psidium guajava (pink guava. The leaves were suggested to have antimicrobial effects on some gram-positive bacteria. When the organism is resistant to specific substance tested on media, a circular/inhibition zone around a disc containing antimicrobial substance was formed. The purpose of this study was to identify the presence of inhibition zones by infusion of Psidium guajava leaf on Streptococci viridians in vitro. Methods: This laboratory experiment was carried out in September to October 2014 at the Microbiology Laboratory, Faculty of Medicine, Universitas Padjadjaran. Infusions of Psidium guajava leaf were made into four different concentrations (10%, 25%, 50% and 100%, respectively and the identification of inhibition zones on Streptococci viridans obtained from the laboratory was tested using modified disk diffusion test. Distilled water acted as negative control. The results were then interpreted after 24 hours of incubation. Every procedure was repeated three times. Results: All four concentrations of Psidium guajava leaf infusions have formed inhibition zones on the media, with the highest concentration (100% producing largest average diameter. Conclusions: The infusion of Psidium guajava leaf produces inhibition zones on Streptococci virdans in vitro.

  5. Infusing Creativity into Eastern Classrooms: Evaluations from Student Perspectives

    Science.gov (United States)

    Cheng, Vivian M. Y.

    2011-01-01

    Infusing creativity elements into regular classroom was an important movement in recent Asian educational reforms. A large-scale research study was conducted in Hong Kong to explore the possibilities, outcomes and difficulties of this kind of curriculum change from students' perspectives. Based mainly on Western creativity literature, this study…

  6. Nitrogen retention response to the abomasal infusion of amino acids ...

    African Journals Online (AJOL)

    The nitrogen (N) retention response to the abomasal infusion of amino acids in South African Mutton Merino ram lambs fed a standard finishing diet was investigated. The basal diet consisted of (g/kg air dry weight): 300 lucerne, 80 wheat straw, 561.5 maize meal, 35 molasses meal, 10 urea, 5 salt, 7.5 ammonium chloride, ...

  7. Effect of insulin pump infusion on comprehensive stress state of ...

    African Journals Online (AJOL)

    Purpose: To assess changes in the comprehensive stress state of patients with diabetic ketoacidosis. (DKA) following treatment with insulin infusion pump. Methods: A total of 240 patients suffering from DKA who received treatment at The First Affiliated. Hospital of Zhengzhou University from Feb. 2011 to Feb. 2014 were ...

  8. Improving Middle School Students' Science Literacy through Reading Infusion

    Science.gov (United States)

    Fang, Zhihui; Wei, Youhua

    2010-01-01

    Despite recent calls for border crossing between reading and science, few studies have examined the impact of reading infusion in the science curriculum on students' science literacy. In this quasi-experimental study, the authors investigated the effects of an inquiry-based science curriculum that integrated explicit reading strategy instruction…

  9. Doing Business with China: Curriculum Internationalisation through an Infusion Method

    Science.gov (United States)

    Jin, Byoungho; Swinney, Jane; Cao, Huantian; Muske, Glenn; Nam, Jinhee; Kang, Ji Hye

    2011-01-01

    The US apparel and textiles industry operates within an interdependent global system, necessitating workforces competent for day-to-day operations. The US workforce lacks preparedness in working globally; this study tests an infusion method of curriculum internationalisation to enhance students' global understanding. Four cognitive and…

  10. Complications of continuous intraperitoneal insulin infusion with an implantable pump

    NARCIS (Netherlands)

    van Dijk, Peter R; Logtenberg, Susan J. J.; Groenier, Klaas H; Haveman, Jan Willem; Kleefstra, Nanno; Bilo, Henk J. G.

    2012-01-01

    AIM: To monitor the course of continuous intraperitoneal insulin infusion (CIPII) and to gain more insight into possible complications. METHODS: A retrospective, longitudinal observational cohort study in patients with type 1 diabetes mellitus (T1DM) was performed. Only patients with "brittle" T1DM

  11. Online feedback-controlled renal constant infusion clearances in rats.

    Science.gov (United States)

    Schock-Kusch, Daniel; Shulhevich, Yury; Xie, Qing; Hesser, Juergen; Stsepankou, Dzmitry; Neudecker, Sabine; Friedemann, Jochen; Koenig, Stefan; Heinrich, Ralf; Hoecklin, Friederike; Pill, Johannes; Gretz, Norbert

    2012-08-01

    Constant infusion clearance techniques using exogenous renal markers are considered the gold standard for assessing the glomerular filtration rate. Here we describe a constant infusion clearance method in rats allowing the real-time monitoring of steady-state conditions using an automated closed-loop approach based on the transcutaneous measurement of the renal marker FITC-sinistrin. In order to optimize parameters to reach steady-state conditions as fast as possible, a Matlab-based simulation tool was established. Based on this, a real-time feedback-regulated approach for constant infusion clearance monitoring was developed. This was validated by determining hourly FITC-sinistrin plasma concentrations and the glomerular filtration rate in healthy and unilaterally nephrectomized rats. The transcutaneously assessed FITC-sinistrin fluorescence signal was found to reflect the plasma concentration. Our method allows the precise determination of the onset of steady-state marker concentration. Moreover, the steady state can be monitored and controlled in real time for several hours. This procedure is simple to perform since no urine samples and only one blood sample are required. Thus, we developed a real-time feedback-based system for optimal regulation and monitoring of a constant infusion clearance technique.

  12. Infusion and diffusion of African scientific information into Open ...

    African Journals Online (AJOL)

    The paper examines the importance of knowledge as a prerequisite for sustainable development which is contingent on information, its value and ability to be produced, used, reused, and shared. The paper explains the opportunities of Open Access Initiatives (OA) as a tool for infusing and diffusing African scientific ...

  13. A naturalistic glyceryl trinitrate infusion migraine model in the rat

    DEFF Research Database (Denmark)

    Ramachandran, Roshni; Bhatt, Deepak Kumar; Ploug, Kenneth Beri

    2012-01-01

    Glyceryl trinitrate (GTN) infusion is a reliable method to provoke migraine-like headaches in humans. Previous studies have simulated this human model in anaesthetized or in awake rodents using GTN doses 10,000 times higher than used in humans. The relevance of such toxicological doses to migraine...

  14. Prostacyclin infusion may prevent secondary damage in pericontusional brain tissue

    DEFF Research Database (Denmark)

    Reinstrup, Peter; Nordström, Carl-Henrik

    2011-01-01

    Prostacyclin is a potent vasodilator, inhibitor of leukocyte adhesion, and platelet aggregation, and has been suggested as therapy for cerebral ischemia. A case of focal traumatic brain lesion that was monitored using intracerebral microdialysis, and bedside analysis and display is reported here........ When biochemical signs of cerebral ischemia progressed, i.v. infusion of prostacyclin was started....

  15. Enzymuria in neonates receiving continuous intravenous infusion of gentamicin

    DEFF Research Database (Denmark)

    Colding, H; Brygge, K; Brendstrup, L

    1992-01-01

    with non-treatment periods in the same newborn infant (33 infants). The same tendency applied to AAP. Newborn infants receiving continuous intravenous infusion of gentamicin were not found to be at greater risk of nephrotoxicity than those receiving intermittent gentamicin treatment, using NAG and AAP...

  16. Continuous intraperitoneal insulin infusion in patients with 'brittle' diabetes

    DEFF Research Database (Denmark)

    DeVries, J H; Eskes, S A; Snoek, Frank J

    2002-01-01

    AIMS: To evaluate the effects of continuous intraperitoneal insulin infusion (CIPII) using implantable pumps on glycaemic control and duration of hospital stay in poorly controlled 'brittle' Dutch diabetes patients, and to assess their current quality of life. METHODS: Thirty-three patients were...

  17. Continuous infusion of vancomycin : Effective, efficient and safe

    NARCIS (Netherlands)

    Van Maarseveen, E.; Touw, D.; Bouma, A.; Van Zanten, A.

    Aims: Vancomycin is an antibiotic which is used in (suspected or proven) bacteriaemia, peritonitis or osteomyelitis with grampositive micro-organisms. Currently in most Dutch hospitals vancomycin is administered as an intermittent infusion. As the killing of vancomycin is dependent of the AUC/MIC

  18. Cardiovascular effects of intravenous ghrelin infusion in healthy young men

    DEFF Research Database (Denmark)

    Vestergaard, Esben Thyssen; Andersen, Niels Holmark; Hansen, Troels Krarup

    2007-01-01

    Ghrelin infusion improves cardiac function in patients suffering from cardiac failure, and bolus administration of ghrelin increases cardiac output in healthy subjects. The cardiovascular effects of more continuous intravenous ghrelin exposure remain to be studied. We therefore studied the cardio......Ghrelin infusion improves cardiac function in patients suffering from cardiac failure, and bolus administration of ghrelin increases cardiac output in healthy subjects. The cardiovascular effects of more continuous intravenous ghrelin exposure remain to be studied. We therefore studied...... the cardiovascular effects of a constant infusion of human ghrelin at a rate of 5 pmol/kg per minute for 180 min. Fifteen healthy, young (aged 23.2 ± 0.5 yr), normal-weight (23.0 ± 0.4 kg/m2) men volunteered in a randomized double-blind, placebo-controlled crossover study. With the subjects remaining fasting, peak...... myocardial systolic velocity S′, tissue tracking TT, left ventricular ejection fraction EF, and endothelium-dependent flow-mediated vasodilatation were measured. Ghrelin infusion increased S′ 9% (P = 0.002) and TT 10% (P

  19. Anaphylactic shock and cardiac arrest caused by thiamine infusion

    DEFF Research Database (Denmark)

    Juel, Jacob; Pareek, Manan; Langfrits, Christian Sigvald

    2013-01-01

    intoxication and developed cardiac arrest due to anaphylactic shock following intravenous thiamine infusion. The patient was successfully resuscitated after 15 min and repeated epinephrine administrations. He was discharged in good health after 14 days. This case report emphasises both the importance...

  20. Residues and contaminants in tea and tea infusions: a review.

    Science.gov (United States)

    Abd El-Aty, A M; Choi, Jeong-Heui; Rahman, Md Musfiqur; Kim, Sung-Woo; Tosun, Alev; Shim, Jae-Han

    2014-01-01

    Consumers are very aware of contaminants that could pose potential health hazards. Most people drink tea as an infusion (adding hot water); however, in some countries, including India, China and Egypt, tea is drunk as a decoction (tea and water are boiled together). An infusion usually brings the soluble ingredients into solution, whereas a decoction brings all soluble and non-soluble constituents together. Therefore, a cup of tea may contain various kinds of contaminants. This review focuses on green and black tea because they are most commonly consumed. The target was to examine the transfer rate of contaminants - pesticides, environmental pollutants, mycotoxins, microorganisms, toxic heavy metals, radioactive isotopes (radionuclides) and plant growth regulators - from tea to infusion/brewing, factors contributing to the transfer potential and contaminants degradation, and residues in or on the spent leaves. It is concluded that most contaminants leaching into tea infusion are not detected or are detected at a level lower than the regulatory limits. However, the traditional practice of over-boiling tea leaves should be discouraged as there may be a chance for more transfer of contaminants from the tea to the brew.

  1. Impact of Curriculum Infusion on College Students' Drinking Behaviors

    Science.gov (United States)

    White, Sabina; Park, Yong Sue; Cordero, Elizabeth Diane

    2010-01-01

    Objective: A posttest-only experimental design was used to examine the effectiveness of curriculum infusion (CI) in reducing alcohol consumption and associated negative consequences among college students. Methods: Faculty teaching 2 identical courses during the same quarter were recruited; both classes were randomly assigned to either a treatment…

  2. Caffeine in teas: levels, transference to infusion and estimated intake

    Directory of Open Access Journals (Sweden)

    Silvia Amelia Verdiani TFOUNI

    2018-01-01

    Full Text Available Abstract Caffeine is naturally present in several foods, being one of the most consumed dietary ingredients in the world; however, excessive intake may cause health concerns. This study evaluated caffeine levels in teas and their infusions, the transference rate during brewing, and estimated caffeine intake from tea infusion. Brands and batches of 4 types of teas were analyzed for caffeine content by high performance liquid chromatography with a diode array detector. Mate tea was the one that presented lowest levels (6.1 to 13.2 mg/g while Camellia sinensis teas were from 14.3 to 34.8 mg/g. There were statistical differences between different types, brands and batches. Caffeine levels in infusions followed the same pattern of the leaves, with mate tea presenting lowest levels. Caffeine percentage of transference from leaves to infusion varied from 51.5 to 85.2%. Caffeine intake was estimated to be up to 191.4 mg/day. Tea may be considered an important source of caffeine intake for heavy tea drinkers.

  3. l~hrombotic thrombocytic purpura plasma infusion or exchange?

    African Journals Online (AJOL)

    1991-02-02

    Feb 2, 1991 ... ple infusion (J.P. Hester - unpublished observation) has been advocated. In view of these contrasting points of view, recommendations for treatment are clearly in need of criti- cal review. Starting with a high index of clinical suspicion, the first step in management is to confirm the diagnosis using labora-.

  4. Liquid-Infused Smooth Surface for Improved Condensation Heat Transfer.

    Science.gov (United States)

    Tsuchiya, Hirotaka; Tenjimbayashi, Mizuki; Moriya, Takeo; Yoshikawa, Ryohei; Sasaki, Kaichi; Togasawa, Ryo; Yamazaki, Taku; Manabe, Kengo; Shiratori, Seimei

    2017-09-12

    Control of vapor condensation properties is a promising approach to manage a crucial part of energy infrastructure conditions. Heat transfer by vapor condensation on superhydrophobic coatings has garnered attention, because dropwise condensation on superhydrophobic surfaces with rough structures leads to favorable heat-transfer performance. However, pinned condensed water droplets within the rough structure and a high thermodynamic energy barrier for nucleation of superhydrophobic surfaces limit their heat-transfer increase. Recently, slippery liquid-infused surfaces (SLIPS) have been investigated, because of their high water sliding ability and surface smoothness originating from the liquid layer. However, even on SLIPS, condensed water droplets are eventually pinned to degrade their heat-transfer properties after extended use, because the rough base layer is exposed as infused liquid is lost. Herein, we report a liquid-infused smooth surface named "SPLASH" (surface with π electron interaction liquid adsorption, smoothness, and hydrophobicity) to overcome the problems derived from the rough structures in previous approaches to obtain stable, high heat-transfer performance. The SPLASH displayed a maximum condensation heat-transfer coefficient that was 175% higher than that of an uncoated substrate. The SPLASH also showed higher heat-transfer performance and more stable dropwise condensation than superhydrophobic surfaces and SLIPS from the viewpoints of condensed water droplet mobility and the thermodynamic energy barrier for nucleation. The effects of liquid-infused surface roughness and liquid viscosity on condensation heat transfer were investigated to compare heat-transfer performance. This research will aid industrial applications using vapor condensation.

  5. Using Cross-Curricular Ideas to Infuse Paralympic Sport

    Science.gov (United States)

    Tepfer, Amanda T. S.; Lieberman, Lauren J.

    2012-01-01

    The Paralympic Games are the second largest sport event in the world. They occur two weeks after the Olympic Games in the same geographic location and sport venues. Despite the Paralympic Games' longevity, many Americans do not even know they exist. One way to meaningfully share information about this event with people of all ages is to infuse a…

  6. The effects of lactose infusion on the pathological manifestations of ...

    African Journals Online (AJOL)

    Except for 4 control calves, 8 calves were experimentally infected using 11 x 106 T. vivax Trypanosomes, intravenously, as a source of neuraminidase. At the peak of parasitaemia, lactose was intravenously infused at the rate of 0.5g kg-1 body weight into 4 of the infected calves, to inhibit the binding of desialylated ...

  7. Arts-Infused Learning in Middle Level Classrooms

    Science.gov (United States)

    Lorimer, Maureen Reilly

    2011-01-01

    To address arts education disparities in middle level schools, this paper explores evidence that infusing the visual and performing arts into language arts, math, science, and history/social studies courses is a pedagogical approach that meets the developmental needs of early adolescents and fosters a relevant, challenging, integrative, and…

  8. Anti-inflammatory and acute toxicity evaluation of aqueous infusion ...

    African Journals Online (AJOL)

    Background: Marrubium deserti de Noé, which is locally known as “Merriouet saharaui”, is widely used in Algeria as a traditional treatment of many ailments. In this study, the anti-inflammatory and acute toxicity of the aqueous infusion extract from aerial parts of Marrubium deserti were investigated. Meanwhile, acute oral ...

  9. Infusing Multicultural Literature into Teacher Education Programs: Three Instructional Approaches

    Science.gov (United States)

    Howlett, Kristina M.; Bowles, Freddie A.; Lincoln, Felicia

    2017-01-01

    Today's classrooms in the United States reflect the growing diversity of the changing world. In order to prepare high-quality multicultural educators, the authors of this article, three teacher educators at a large, mid-south, research-one university, collaborated to share successful strategies to infuse multicultural literature into the three…

  10. Effect of insulin pump infusion on comprehensive stress state of ...

    African Journals Online (AJOL)

    Purpose: To assess changes in the comprehensive stress state of patients with diabetic ketoacidosis (DKA) following treatment with insulin infusion pump. Methods: A total of 240 patients suffering from DKA who received treatment at The First Affiliated Hospital of Zhengzhou University from Feb. 2011 to Feb. 2014 were ...

  11. Correlation of antioxidant activity of dried berry infusions with the ...

    African Journals Online (AJOL)

    Antioxidant activity was measured by ferric reducing ability of plasma (FRAP) assay in seven types of infusions prepared from commercial dried berry fruit products: Rosa canina, Vaccinium vitis-idaea, Hiphophae rhamnoides, Hibiscus sabdariffa and three fruit mixtures. Total polyphenols (TP), total anthocyanins and the ...

  12. Infusing Quantitative Approaches throughout the Biological Sciences Curriculum

    Science.gov (United States)

    Thompson, Katerina V.; Cooke, Todd J.; Fagan, William F.; Gulick, Denny; Levy, Doron; Nelson, Kären C.; Redish, Edward F.; Smith, Robert F.; Presson, Joelle

    2013-01-01

    A major curriculum redesign effort at the University of Maryland is infusing all levels of our undergraduate biological sciences curriculum with increased emphasis on interdisciplinary connections and quantitative approaches. The curriculum development efforts have largely been guided by recommendations in the National Research Council's "Bio…

  13. Nitrogen retention response to the abomasal infusion of amino acids

    African Journals Online (AJOL)

    HESTER LINDE

    , 91.5 lysine, 146.9 methionine,. 105.6 phenylalanine, 133.8 threonine and 118.7 valine. The mixture was infused at levels of (g/d): 0.00, 38.27,. 51.02 or 63.78. Glycine was used to balance the various mixtures on an iso-nitrogenous basis.

  14. Continuous subcutaneous insulin infusion in neonatal diabetes mellitus.

    Science.gov (United States)

    Wintergerst, Kupper A; Hargadon, Susan; Hsiang, Helen Y

    2004-12-01

    A 1.2-kg premature baby boy with severe intrauterine growth retardation developed diabetes on d 2 of life. The computed tomography scan of the pancreas failed to show the tail, indicating agenesis of the dorsal anlage. Continuous subcutaneous insulin infusion (CSII) had been used for the subsequent 26 months. Complications, such as hypoglycemia, were minimal.

  15. Infusing Peaceful Heroes into the Communication Arts Curriculum.

    Science.gov (United States)

    Shatles, Diane

    This four-part paper presents aspects of a curriculum developed to counter the violent image of heroes in the media by presenting children with role models of men and women who are peacemakers. The paper's first section presents an overview and rationale of the program, stating that: (1) it is an infusion curriculum (not requiring additional…

  16. Curriculum Infusion as College Student Mental Health Promotion Strategy

    Science.gov (United States)

    Mitchell, Sharon L.; Darrow, Sherri A.; Haggerty, Melinda; Neill, Thomas; Carvalho, Amana; Uschold, Carissa

    2012-01-01

    This article describes efforts to increase faculty involvement in suicide prevention and mental health promotion via curriculum infusion. The participants were faculty, staff, and 659 students enrolled in classes of a large eastern university from Fall 2007-Spring 2011. Counselors, health educators, and medical providers recruited faculty from a…

  17. Use of acidifiers and herb-acidifier combinations with encapsulated and non-encapsulated intestinal microflora, intestinal histological and serum characteristics in broiler

    Science.gov (United States)

    Natsir, Muhammad Halim; Hartutik, Sjofjan, Osfar; Widodo, Eko; Widyastuti, Eny Sri

    2017-05-01

    The objective of this experiment was to evaluate the use of acidifier and herb-acidifier combinations on intestinal microflora, intestinal histology and serum characteristics of broilers at 35 days of age when fed a diet supplemented with natural acidifier (lactic acid and citric acid), and herb-acidifier combinations (natural acidifier and herbs (garlic and Phyllanthus niruri L.) encapsulated and non-encapsulated. Here, 192 (Lohmann) broiler chicks were fed a negative control diet, positive control diet (tetracycline), 1.2% acidifier non-encapsulated (ANE), 1.2% acidifier encapsulated (AE), 1.2% herb-acidifier combination non-encapsulated (CNE), or 1.2% herb-acidifier combination encapsulated (CE). The variables measured were the total colony of lactic acid bacteria, Escherichia coli and Salmonella sp., intestinal histological characteristics (crypt depth, villi number, villi length, and viscosity) and serum (total protein, serum albumin, and serum globulin). Results showed that during the 35-d growth period, there were significant differences (Plactic acid bacteria and a decrease in the total colony of Escherichia coli and Salmonella sp., along with increasing intestinal histological characteristics (crypt depth, villi number, villi length, and viscosity) and total proteins in the serum, as well as significant effects (P<0.05) on intestinal pH and serum albumin. It is concluded that the use acidifiers or herb-acidifier combinations in encapsulation performed better than without encapsulation. Therefore using 1.2% of encapsulated combinations of herb-acidifiers in broiler diet is recommended.

  18. Stability Comparison of Free and Encapsulated Lactobacilus casei ATCC 393 in Yoghurt for Long Time Storage

    Directory of Open Access Journals (Sweden)

    Oana Lelia POP

    2016-11-01

    Full Text Available An innovative method of L. casei ATCC 393 encapsulation has been reported in the present study using pectin combined with alginate. The aim of this study was to investigate the effect of encapsulation on the survival of L. casei ATCC 393 in yoghurt during long time storage, free or encapsulated in alginate and alginate pectin microspheres, and influence over yoghurt properties, particularly acidification. Over 35 days of storage in yoghurt, the encapsulated probiotic cells proved a higher viability compared with free probiotic cells. An even higher viability and stability was observed for the samples where pectin was used. Pectin acts as prebiotic during encapsulation of L. casei ATCC 393.

  19. Comparison of the intracoronary continuous infusion method using a microcatheter and the intravenous continuous adenosine infusion method for inducing maximal hyperemia for fractional flow reserve measurement.

    Science.gov (United States)

    Yoon, Myeong-Ho; Tahk, Seung-Jea; Yang, Hyoung-Mo; Park, Jin-Sun; Zheng, Mingri; Lim, Hong-Seok; Choi, Byoung-Joo; Choi, So-Yeon; Choi, Un-Jung; Hwang, Joung-Won; Kang, Soo-Jin; Hwang, Gyo-Seung; Shin, Joon-Han

    2009-06-01

    Inducing stable maximal coronary hyperemia is essential for measurement of fractional flow reserve (FFR). We evaluated the efficacy of the intracoronary (IC) continuous adenosine infusion method via a microcatheter for inducing maximal coronary hyperemia. In 43 patients with 44 intermediate coronary lesions, FFR was measured consecutively by IC bolus adenosine injection (48-80 microg in left coronary artery, 36-60 microg in the right coronary artery) and a standard intravenous (IV) adenosine infusion (140 microg x min(-1) x kg(-1)). After completion of the IV infusion method, the tip of an IC microcatheter (Progreat Microcatheter System, Terumo, Japan) was positioned at the coronary ostium, and FFR was measured with increasing IC continuous adenosine infusion rates from 60 to 360 microg/min via the microcatheter. Fractional flow reserve decreased with increasing IC adenosine infusion rates, and no further decrease was observed after 300 microg/min. All patients were well tolerated during the procedures. Fractional flow reserves measured by IC adenosine infusion with 180, 240, 300, and 360 microg/min were significantly lower than those by IV infusion (P < .05). Intracoronary infusion at 180, 240, 300, and 360 microg/min was able to shorten the times to induction of optimal and steady-stable hyperemia compared to IV infusion (P < .05). Functional significances were changed in 5 lesions by IC infusion at 240 to 360 microg/min but not by IV infusion. The results of this study suggest that an IC adenosine continuous infusion method via a microcatheter is safe and effective in inducing steady-state hyperemia and more potent and quicker in inducing optimal hyperemia than the standard IV infusion method.

  20. Study of Cisatracurium and Sufentanil Consumption Using a Closed Loop Computer Control Infusion System

    Science.gov (United States)

    2013-02-06

    The Intraoperative Effect of Dexmedetomidine on Cisatracurium Infusion Consumption and Its Recovery Index.; Effect of Dexmedetomidine on Sufentanil Consumption.; Quantitative Analysis of Cisatracurium Infusion Requirements, Sufentanil Consumption and Recovery Index in Different Age Groups.

  1. Effect of glucose infusion on endurance performance after beta-adrenoceptor blocker administration

    NARCIS (Netherlands)

    van Baak, M.A.; Mooij, J.M.

    1994-01-01

    Effect of glucose infusion on endurance performance after beta-adrenoceptor blocker administration. Van Baak MA, Mooij JM. Department of Human Biology, University of Limburg, Maastricht, The Netherlands. To investigate the effect of glucose (Glc) infusion on endurance performance after

  2. [A Case of HPN, In Which QOL Improvement Was Achieved by Combining Continuous Infusion with Once-Weekly Intermittent Infusion - Contribution of Pharmacists to Health Promotion among Home Patients Receiving Infusion Therapy].

    Science.gov (United States)

    Takeda, Namihiro; Hamana, Tomoko; Oka, Toyoka; Hirohara, Masayoshi; Kushida, Kazuki

    2016-12-01

    Patients receiving parenteral nutrition at home have the following two options: 24-h continuous or intermittent infusion. To date, for patients with impaired glucose tolerance and/or other metabolic disorders or for those with decreased cardiac/ pulmonary/renal function, it is desirable to opt for continuous infusion to minimize the variance in the body's metabolic rate as much as possible. Furthermore, it should be noted that continuous infusion evokes a stronger feeling among patients of being constrained because it restricts their everyday activities. This case witnesses collaborations among the patient's doctor, dispensary's pharmacy, and patient's family. Because ofthe use ofintermittent infusion more or less once per week in addition to continuous infusion, significant improvement in quality of life was achieved, and the patient was able to enjoy taking a short trip. To assist a home patient receiving infusion therapy, it is essential that the pharmacist be equipped with skills to manage risks associated with infusion therapy and have knowledge about insurance to cover incidents concerning infusion fluids or medical materials. It will certainly depend on the degree ofindependence ofpatients and the level ofcare their families can provide; however, should we manage to use a similar medical procedure in at least a few cases in the future, we may be able to contribute to "joie de vivre" in home patients receiving infusion therapy.

  3. Nanoparticles in Porous Microparticles Prepared by Supercritical Infusion and Pressure Quench Technology for Sustained Delivery of Bevacizumab

    Science.gov (United States)

    K.Yandrapu, Sarath; Upadhyay, Arun K.; Petrash, J. Mark; Kompella, Uday B.

    2014-01-01

    Nanoparticles in porous microparticles (NPinPMP), a novel delivery system for sustained delivery of protein drugs, was developed using supercritical infusion and pressure quench technology, which does not expose proteins to organic solvents or sonication. The delivery system design is based on the ability of supercritical carbon dioxide (SC CO2) to expand poly(lactic-co-glycolic) acid (PLGA) matrix but not polylactic acid (PLA) matrix. The technology was applied to bevacizumab, a protein drug administered once a month intravitreally to treat wet age related macular degeneration. Bevacizumab coated PLA nanoparticles were encapsulated into porosifying PLGA microparticles by exposing the mixture to SC CO2. After SC CO2 exposure, the size of PLGA microparticles increased by 6.9 fold. Confocal and scanning electron microscopy studies demonstrated the expansion and porosification of PLGA microparticles and infusion of PLA nanoparticles inside PLGA microparticles. In vitro release of bevacizumab from NPinPMP was sustained for 4 months. Size exclusion chromatography, fluorescence spectroscopy, circular dichroism spectroscopy, SDS-PAGE, and ELISA studies indicated that the released bevacizumab maintained its monomeric form, conformation, and activity. Further, in vivo delivery of bevacizumab from NPinPMP was evaluated using noninvasive fluorophotometry after intravitreal administration of Alexa Flour 488 conjugated bevacizumab in either solution or NPinPMP in a rat model. Unlike the vitreal signal from Alexa-bevacizumab solution, which reached baseline at 2 weeks, release of Alexa-bevacizumab from NPinPMP could be detected for 2 months. Thus, NPinPMP is a novel sustained release system for protein drugs to reduce frequency of protein injections in the therapy of back of the eye diseases. PMID:24131101

  4. High voltage photo-switch package module having encapsulation with profiled metallized concavities

    Science.gov (United States)

    Sullivan, James S; Sanders, David M; Hawkins, Steven A; Sampayan, Stephen A

    2015-05-05

    A photo-conductive switch package module having a photo-conductive substrate or wafer with opposing electrode-interface surfaces metalized with first metallic layers formed thereon, and encapsulated with a dielectric encapsulation material such as for example epoxy. The first metallic layers are exposed through the encapsulation via encapsulation concavities which have a known contour profile, such as a Rogowski edge profile. Second metallic layers are then formed to line the concavities and come in contact with the first metal layer, to form profiled and metalized encapsulation concavities which mitigate enhancement points at the edges of electrodes matingly seated in the concavities. One or more optical waveguides may also be bonded to the substrate for coupling light into the photo-conductive wafer, with the encapsulation also encapsulating the waveguides.

  5. Issues deserve attention in encapsulating probiotics: Critical review of existing literature.

    Science.gov (United States)

    Chen, Jun; Wang, Qi; Liu, Cheng-Mei; Gong, Joshua

    2017-04-13

    Probiotic bacteria are being increasingly added to food for developing products with health-promoting properties. However, the efficacy of probiotics in commercial products is often questioned due to the loss of their viability during shelf storage and in human gastrointestinal tracts. Encapsulation of probiotics has been expected to provide protection to probiotics, but not many commercial products contain encapsulated and viable probiotic cells owing to various reasons. To promote the development and application of encapsulation technologies, this paper has critically reviewed previous publications with a focus on the areas where studies have fallen short, including insufficient consideration of structural effects of encapsulating material, general defects in encapsulating methods and issues in evaluation methodologies and risk assessments for application. Corresponding key issues that require further studies are highlighted. Some emerging trends in the field, such as current treads in encapsulating material and recently advanced encapsulation techniques, have also been discussed.

  6. The incidence and management of infusion reactions to infliximab: a large center experience.

    Science.gov (United States)

    Cheifetz, Adam; Smedley, Michelle; Martin, Sara; Reiter, Monica; Leone, Grace; Mayer, Lloyd; Plevy, Scott

    2003-06-01

    To assess the incidence and management of infusion reactions to infliximab, a chimeric monoclonal antibody that targets human tumor necrosis factor-alpha, in patients with Crohn's disease treated at a large infusion center. A total of 165 consecutive patients who received 479 infliximab infusions in the Division of Clinical Immunology Infusion Center at Mount Sinai Medical Center from July, 1998 to January, 2001 were evaluated. Specific treatment protocols for initial and subsequent acute infusion reactions were followed and the outcomes documented. The overall incidence of infusion reactions to infliximab was 6.1% (29 of 479) of infusions, affecting 9.7% (16 of 165) of patients. Mild, moderate, or severe acute reactions occurred in 3.1% (15 of 479), 1.2% (six of 479), and 1.0% (five of 479) of infliximab infusions, respectively. Use of treatment protocols resulted in rapid resolution of all acute reactions to infliximab. With the prophylaxis protocol, all patients who experienced an initial mild or moderate acute reaction were able to receive additional infusions. Four patients experienced a total of five severe acute reactions. Three patients were retreated: two patients had no further problems, whereas one patient had a second severe acute reaction that rapidly resolved with treatment. Suggesting that acute infusion reactions are not type I hypersensitivity reactions, in 11 patients who experienced 14 acute infusion reactions, serum tryptase levels were normal. Delayed infusion reactions occurred in 0.6% (three of 479) of infusions. Infliximab infusions were accompanied by acute reactions in approximately 5% of infusions. These reactions did not seem to be true IgE-mediated type I hypersensitivity events. Using appropriate treatment protocols, these reactions were effectively treated and prevented upon retreatment in nearly all patients. Delayed reactions were rare, occurring in <1% of infusions.

  7. Using miniature osmotic infusion pumps to maintain tritiated thymidine exposure to cells in culture

    International Nuclear Information System (INIS)

    Neely, J.E.; Hake, D.A.

    1982-01-01

    To provide a constant level of tracer doses of tritiated thymidine to cultured cells during continuous infusion, miniature osmotic infusion pumps were used to provide replacement thymidine. By determining the loss of isotope from the media during nonreplacement, the rate of constant infusion replacement to maintain thymidine levels was calculated. The replacement rates were similar for the three cell lines examined and allowed a standard osmotic pump infusion

  8. A new infusion sustainer that stabilizes perfusion during sutureless 25-gauge vitrectomy.

    Science.gov (United States)

    Hattori, Takayuki; Shimada, Hiroyuki; Nakashizuka, Hiroyuki; Mori, Ryusaburo; Mizutani, Yoshihiro; Yuzawa, Mitsuko

    2010-12-01

    To stabilize perfusion during sutureless 25-gauge (25G) vitrectomy, we designed an infusion sustainer and examined its usefulness. A reusable infusion sustainer was constructed by soldering a piece of metal wire to a metal paper clip and curling the two ends of the wire. For use, the sustainer was clipped onto the lip retractor, and the infusion line and chandelier fiber were passed through the wire loops. 25G vitrectomy was conducted in three porcine eyes, with insertion of a tonometer to monitor intraocular pressure (IOP). The relation between infusion port direction and IOP was examined. In a clinical study, 30 eyes that underwent 25G vitrectomy using the infusion sustainer and 30 eyes without using the infusion sustainer were compared for IOP maintenance and complications. In the porcine eye, after angled incision, the infusion tip was pointing toward the basal vitreous on the anterior side of the eyeball. Under these conditions, vitreous resection was accompanied by IOP lowering. When the infusion tip was moved so as to be directed toward the central vitreous, IOP was maintained. In the clinical study, among the eyes undergoing vitrectomy without the infusion sustainer, IOP decreased during operation in 30 eyes, and infusion fluid or air flowed into the anterior chamber in four eyes. In the 30 eyes in which the sustainer was used, no IOP lowering and no infusion fluid or air flow into the anterior chamber were detected, due to stabilization of the infusion port. Use of the infusion sustainer orients the infusion port toward the central vitreous, stabilizes IOP and prevents flow of infusion fluid or air into the anterior chamber. This infusion sustainer is useful to perform sutureless 25G vitrectomy safely.

  9. Hydrogen-bonded encapsulation complexes in protic solvents.

    Science.gov (United States)

    Amaya, Toru; Rebek, Julius

    2004-11-03

    We describe here the behavior of the hydrogen-bonded capsule 1.1 and its complexes in protic solvents. The kinetics and thermodynamics of the encapsulation process were determined through conventional (1)H NMR methods. The enthalpies and entropies of encapsulation are both positive, indicating a process that liberates solvent molecules. The rates of dissociation-association of the capsule were comparable to the rates for the in-out exchange of large guests, which suggests that guest exchange occurs by complete dissociation of the capsule in protic solvents. The stability of the hydrogen-bonded capsule 1.1 toward protic solvents depends strongly on the guests, with the best guest being dimethylstilbene 8. The results establish guidelines for the properties of capsules that could be accessed in water.

  10. Polyethylene encapsulation full-scale technology demonstration. Final report

    International Nuclear Information System (INIS)

    Kalb, P.D.; Lageraaen, P.R.

    1994-10-01

    A full-scale integrated technology demonstration of a polyethylene encapsulation process, sponsored by the US Department of Energy (DOE) Office of Technology Development (OTD), was conducted at the Environmental ampersand Waste Technology Center at Brookhaven National Laboratory (BNL.) in September 1994. As part of the Polymer Solidification National Effort, polyethylene encapsulation has been developed and tested at BNL as an alternative solidification technology for improved, cost-effective treatment of low-level radioactive (LLW), hazardous and mixed wastes. A fully equipped production-scale system, capable of processing 900 kg/hr (2000 lb/hr), has been installed at BNL. The demonstration covered all facets of the integrated processing system including pre-treatment of aqueous wastes, precise feed metering, extrusion processing, on-line quality control monitoring, and process control

  11. Encapsulation of astaxanthin-rich Xanthophyllomyces dendrorhous for antioxidant delivery.

    Science.gov (United States)

    Lee, Ji-Soo; Park, Sun-Ah; Chung, Donghwa; Lee, Hyeon Gyu

    2011-10-01

    Calcium alginate gel (CAG) beads were used to entrap the antioxidant astaxanthin-rich Xanthophyllomyces dendrorhous (ASX) by ionic gelation. ASX-CAG bead entrapment efficiency and release behavior, as influenced by alginate and CaCl(2) concentration and hardening time, were investigated. The optimized bead preparation conditions that gave rise to an efficient ASX release pattern were 1.5% alginate, 50mM CaCl(2), and a 5min hardening time. The antioxidant activity of non-encapsulated ASX was maintained for 4 days and then sharply decreased, whereas encapsulated ASX was maintained for 6 days. These results revealed that physical entrapment of ASX within CAG beads could be an effective technique for protecting the antioxidant activity of ASX from lipid peroxidation. Copyright © 2011 Elsevier B.V. All rights reserved.

  12. Nanoscale encapsulation: the structure of cations in hydrophobic microporous aluminosilicates

    International Nuclear Information System (INIS)

    Wasserman, S.R.; Yuchs, S.E.; Giaquinta, D.; Soderholm, L.; Song, Kang.

    1996-01-01

    Hydrophobic microporous aluminosilicates, created by organic surface modification of inherently hydrophilic materials such as zeolites and clays, are currently being investigated as storage media for hazardous cations. Use of organic monolayers to modify the surface of an aluminosilicate after introducing an ion into the zeolite/clay reduces the interaction of water with the material. Resulting systems are about 20 times more resistant to leaching of stored ion. XAS spectra from the encapsulated ion demonstrate that byproducts from the organic modifier can complex with the stored cation. This complexation can result in a decreased affinity of the cation for the aluminosilicate matrix. Changing the organic modifier eliminates this problem. XAS spectra also indicate that the reactivity and speciation of the encapsulated ion may change upon application of the hydrophobic layer

  13. Preparation of encapsulated proteins dissolved in low viscosity fluids

    International Nuclear Information System (INIS)

    Ehrhardt, Mark R.; Flynn, Peter F.; Wand, A. Joshua

    1999-01-01

    The majority of proteins are too large to be comprehensively examined by solution NMR methods, primarily because they tumble too slowly in solution. One potential approach to making the NMR relaxation properties of large proteins amenable to modern solution NMR techniques is to encapsulate them in a reverse micelle which is dissolved in a low viscosity fluid. Unfortunately, promising low viscosity fluids such as the short chain alkanes, supercritical carbon dioxide, and various halocarbon refrigerants all require the application of significant pressure to be kept liquefied at room temperature. Here we describe the design and use of a simple cost effective NMR tube suitable for the preparation of solutions of proteins encapsulated in reverse micelles dissolved in such fluids

  14. Characterization of Encapsulated Corrosion Inhibitors for Environmentally Friendly Smart Coatings

    Science.gov (United States)

    Pearman, Benjamin Pieter; Li, Wenyan; Buhrow, Jerry; Zhang, Xuejun; Surma, Jan; Fitzpatrick, Lilly; Montgomery, Eliza; Calle, Luz Marina

    2014-01-01

    Research efforts are under way to replace current corrosion inhibitors with more environmentally friendly alternatives. However, problems with corrosion inhibition efficiency, coating compatibility and solubility have hindered the use of many of these materials as simple pigment additives.This paper will present technical details on how the Corrosion Technology Lab at NASAs Kennedy Space Center (KSC) has addressed these issues by encapsulating environmentally friendly inhibitors into organic and inorganic microparticles and microcapsules. The synthetic process for polymer particles was characterized and post-synthesis analysis was performed to determine the interactions between the inhibitors and the encapsulation material. The pH-controlled release of inhibitors from various particle formulations in aqueous base was monitored and compared to both electrochemical and salt immersion accelerated corrosion experiment. Furthermore, synergistic corrosion inhibition effects observed during the corrosion testing of several inhibitor combinations will be presented.

  15. Cellulase immobilization on magnetic nanoparticles encapsulated in polymer nanospheres.

    Science.gov (United States)

    Lima, Janaina S; Araújo, Pedro H H; Sayer, Claudia; Souza, Antonio A U; Viegas, Alexandre C; de Oliveira, Débora

    2017-04-01

    Immobilization of cellulases on magnetic nanoparticles, especially magnetite nanoparticles, has been the main approach studied to make this enzyme, economically and industrially, more attractive. However, magnetite nanoparticles tend to agglomerate, are very reactive and easily oxidized in air, which has strong impact on their useful life. Thus, it is very important to provide proper surface coating to avoid the mentioned problems. This study aimed to investigate the immobilization of cellulase on magnetic nanoparticles encapsulated in polymeric nanospheres. The support was characterized in terms of morphology, average diameter, magnetic behavior and thermal decomposition analyses. The polymer nanospheres containing encapsulated magnetic nanoparticles showed superparamagnetic behavior and intensity average diameter about 150 nm. Immobilized cellulase exhibited broader temperature stability than in the free form and great reusability capacity, 69% of the initial enzyme activity was maintained after eight cycles of use. The magnetic support showed potential for cellulase immobilization and allowed fast and easy biocatalyst recovery through a single magnet.

  16. Nanotechnology Applied to Bio-Encapsulation of Pesticides.

    Science.gov (United States)

    Grillo, Renato; Abhilash, Purushothaman Chirakkuzhyil; Fraceto, Leonardo Fernandes

    2016-01-01

    In recent years, many efforts have been made towards the application of nanotechnology in sustainable food production. In this context, the bio-encapsulation process has taken prominence in particular as an ecofriendly method for pest control while reducing the pesticide load in the environment considerably. By taking into consideration, here we are presenting an overview regarding the prospects for the development of nanoencapsulated pesticides in sustainable agriculture and highlight some challenges to be addressed in order to develop efficient nano-carrier systems that may arise as an alternative for conventional pesticide application. However, much research has to be done in this area in order to develop safe and promising pesticide delivery systems for increasing global food production by enhancing the selectivity, specificity and longevity of the encapsulated pesticides while reducing the negative environmental impacts to ecosystem and human beings.

  17. Some thermal analysis aspects of metal encapsulated waste

    International Nuclear Information System (INIS)

    Jardine, L.J.; Steindler, M.J.

    1978-01-01

    This paper is to summarize two waste management schemes: (1) packaging for extended storage of LWR spent fuel assemblies, with the capability for simple conversion either to terminal storage if a ''throwaway'' fuel cycle is ultimately adopted or to a form that can be reprocessed and (2) packaging for the terminal storage of solidified high-level wastes when the reprocessing of spent fuel is initiated. Only concepts utilizing metals or metal alloys to encapsulate either spent fuel or solidified high-level waste forms have been considered. Conceptual process flow sheets have been constructed to allow potential advantages and disadvantages of encapsulation alternatives to be identified in comparison with more conventional reference processes. Identification is also made of uncertainties of the analysis due to a lack of fundamental data required to perform evaluations. 3 tables

  18. Wetting and free surface flow modeling for potting and encapsulation.

    Energy Technology Data Exchange (ETDEWEB)

    Brooks, Carlton, F.; Brooks, Michael J. (Los Alamos National Laboratory, Los Alamos, NM); Graham, Alan Lyman (Los Alamos National Laboratory, Los Alamos, NM); Noble, David F. (David Frederick) (.; )); Notz, Patrick K.; Hopkins, Matthew Morgan; Castaneda, Jaime N.; Mahoney, Leo James (Kansas City Plant, Kansas City, MO); Baer, Thomas A.; Berchtold, Kathryn (Los Alamos National Laboratory, Los Alamos, NM); Adolf, Douglas Brian; Wilkes, Edward Dean; Rao, Rekha Ranjana; Givler, Richard C.; Sun, Amy Cha-Tien; Cote, Raymond O.; Mondy, Lisa Ann; Grillet, Anne Mary; Kraynik, Andrew Michael

    2007-06-01

    As part of an effort to reduce costs and improve quality control in encapsulation and potting processes the Technology Initiative Project ''Defect Free Manufacturing and Assembly'' has completed a computational modeling study of flows representative of those seen in these processes. Flow solutions are obtained using a coupled, finite-element-based, numerical method based on the GOMA/ARIA suite of Sandia flow solvers. The evolution of the free surface is solved with an advanced level set algorithm. This approach incorporates novel methods for representing surface tension and wetting forces that affect the evolution of the free surface. In addition, two commercially available codes, ProCAST and MOLDFLOW, are also used on geometries representing encapsulation processes at the Kansas City Plant. Visual observations of the flow in several geometries are recorded in the laboratory and compared to the models. Wetting properties for the materials in these experiments are measured using a unique flowthrough goniometer.

  19. In situ encapsulation of liquids by means of crystallization

    Science.gov (United States)

    Hartwig, Anne; Ulrich, Joachim

    2017-07-01

    The in situ encapsulation process is due to its few process steps an innovative and cost effective alternative to common encapsulation techniques. It combines the well-known processes of pastillation and crystallization. This concept is proven with case studies of three xylitol capsules which vary in composition and size. It could be shown that the knowledge concerning the solubility of the components is essential to determine the suitable production conditions. The application of seed crystals and the temperatures during the process have major effects on the capsules quality. A fast crystallization of the capsules results in an instable shell. However, with increasing layer thickness of the shell, the crushing force that needs to be applied to break the capsules is increasing as well. But the stability which is related to the capsules size is decreasing with increasing diameter, even though layer thickness and crushing force are increasing, too.

  20. Measure Guideline: Buried and/or Encapsulated Ducts

    Energy Technology Data Exchange (ETDEWEB)

    Shapiro, C. [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States); Zoeller, W. [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States); Mantha, P. [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States)

    2013-08-01

    Buried and/or encapsulated ducts (BEDs) are a class of advanced, energy-efficiency strategies intended to address the significant ductwork thermal losses associated with ducts installed in unconditioned attics. BEDs are ducts installed in unconditioned attics that are covered in loose-fill insulation and/or encapsulated in closed cell polyurethane spray foam insulation. This Measure Guideline covers the technical aspects of BEDs as well as the advantages, disadvantages, and risks of BEDs compared to other alternative strategies. This guideline also provides detailed guidance on installation of BEDs strategies in new and existing homes through step-by-step installation procedures. Some of the procedures presented here, however, require specialized equipment or expertise. In addition, some alterations to duct systems may require a specialized license.

  1. Micropillar arrays enabling single microbial cell encapsulation in hydrogels.

    Science.gov (United States)

    Park, Kyun Joo; Lee, Kyoung G; Seok, Seunghwan; Choi, Bong Gill; Lee, Moon-Keun; Park, Tae Jung; Park, Jung Youn; Kim, Do Hyun; Lee, Seok Jae

    2014-06-07

    Single microbial cell encapsulation in hydrogels is an important task to find valuable biological resources for human welfare. The conventional microfluidic designs are mainly targeted only for highly dispersed spherical bioparticles. Advanced structures should be taken into consideration for handling such aggregated and non-spherical microorganisms. Here, to address the challenge, we propose a new type of cylindrical-shaped micropillar array in a microfluidic device for enhancing the dispersion of cell clusters and the isolation of individual cells into individual micro-hydrogels for potential practical applications. The incorporated micropillars act as a sieve for the breaking of Escherichia coli (E. coli) clusters into single cells in a polymer mixture. Furthermore, the combination of hydrodynamic forces and a flow-focusing technique will improve the probability of encapsulation of a single cell into each hydrogel with a broad range of cell concentrations. This proposed strategy and device would be a useful platform for genetically modified microorganisms for practical applications.

  2. Inorganic Substrates and Encapsulation Layers for Transient Electronics

    Science.gov (United States)

    2014-07-01

    transistors and diodes [5, 11, 12]. Solar cells , mechanical energy harvesters, strain and temperature sensors, photodetectors and other devices are...addition to PECVD based multiple layers, atomic layer deposition ( ALD ) provides a complementary strategy to reduce effects arising from defects. A...double layer of PECVD SiO2 (or PECVD Si3N4) and ALD SiO2 provides effective means of encapsulation, even with thin layers (Figure 1a, right

  3. Tuning the Electrical Conductivity of Nanotube-Encapsulated Metallocene Wires

    Science.gov (United States)

    García-Suárez, Víctor M.; Ferrer, Jaime; Lambert, Colin J.

    2006-03-01

    We analyze a new family of carbon nanotube-based molecular wires, formed by encapsulating metallocene molecules inside the nanotubes. Our simulations, which are based on a combination of nonequilibrium Green function techniques and density functional theory, indicate that these wires can be engineered to exhibit desirable magnetotransport effects for use in spintronics devices. The proposed structures should also be resilient to room-temperature fluctuations, and are expected to have a high yield.

  4. Low and medium activity solid wastes processing and encapsulation

    International Nuclear Information System (INIS)

    Taillard, D.; Claes, J.; Hennart, D.

    1983-01-01

    This work, carried out under contract with the European Atomic Energy Community, describes the techniques in use for waste management. The activity of low and medium activity solid wastes is from few curies to few tens of curies per cubic meter, they are produced by nuclear facilities and are often complex mixtures. Radioactive wastes are characterized and processing and conditioning are described. Leaching, stability, mechanical resistance and radiolysis of encapsulated wastes are examined. Handling, storage and disposal are treated

  5. Impact of osmotic dehydration on the encapsulated apices survival ...

    African Journals Online (AJOL)

    L-1 activated charcoal) prior to encapsulation in alginate (3%) beads with calcium chloride (1.32M). Then, the apices were exposed to osmotic dehydration with two concentrations of sucrose (0.75M and 1.25M) at two durations (24h and 40h) before their culture in M2 medium (MS + 2mg.L-1 BAP, 100?g.L-1 d'ANA and 2g.

  6. Waste Encapsulation and Storage Facility interim operational safety requirements

    CERN Document Server

    Covey, L I

    2000-01-01

    The Interim Operational Safety Requirements (IOSRs) for the Waste Encapsulation and Storage Facility (WESF) define acceptable conditions, safe boundaries, bases thereof, and management or administrative controls required to ensure safe operation during receipt and inspection of cesium and strontium capsules from private irradiators; decontamination of the capsules and equipment; surveillance of the stored capsules; and maintenance activities. Controls required for public safety, significant defense-in-depth, significant worker safety, and for maintaining radiological consequences below risk evaluation guidelines (EGs) are included.

  7. Encapsulation of Gold Nanoparticles in a DNA Origami Cage

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Zhao; Jacovetty, Erica L.; Liu, Yan; Yan, Hao

    2011-01-21

    A critical challenge in nanoparticle (NP) surface functionalization is to label the NP surface with a single copy of a functional group or to display multiple, unique molecules on the NP surface with control of the orientation and intermolecular distance. This challenge was addressed with the construction of a spatially addressable, self-assembling DNA origami nanocage that encapsulates gold nanoparticles and interrupts its surface symmetry

  8. A simple method to ensure homogeneous drug distribution during intrarenal infusion

    DEFF Research Database (Denmark)

    Postnov, Dmitry D; Salomonsson, Max; Sorensen, Charlotte M

    2017-01-01

    Intrarenal drug infusion plays an important role in renal experimental research. Laminar flow of the blood can cause streaming and inhomogeneous intrarenal distribution of infused drugs. We suggest a simple method to achieve a homogeneous intravascular distribution of drugs infused into the renal...

  9. 21 CFR 880.5965 - Subcutaneous, implanted, intravascular infusion port and catheter.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Subcutaneous, implanted, intravascular infusion... Hospital and Personal Use Therapeutic Devices § 880.5965 Subcutaneous, implanted, intravascular infusion port and catheter. (a) Identification. A subcutaneous, implanted, intravascular infusion port and...

  10. 21 CFR 880.2420 - Electronic monitor for gravity flow infusion systems.

    Science.gov (United States)

    2010-04-01

    ... monitor the amount of fluid being infused into a patient. The device consists of an electronic transducer... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Electronic monitor for gravity flow infusion... and Personal Use Monitoring Devices § 880.2420 Electronic monitor for gravity flow infusion systems...

  11. Haemolysis following rapid experimental red blood cell transfusion--an evaluation of two infusion pumps

    DEFF Research Database (Denmark)

    Hansen, Tom Giedsing; Sprogøe-Jakobsen, U; Pedersen, C M

    1998-01-01

    The vast majority of infusion pumps used for rapid transfusion of large amounts of blood have never been properly examined regarding their influence on the quality of the red blood cells (RBCs) infused. In this study, we evaluated the effect of two different infusion pumps on the degree of RBC de...

  12. Polymeric microcapsules with light responsive properties for encapsulation and release.

    Science.gov (United States)

    Bédard, Matthieu F; De Geest, Bruno G; Skirtach, Andre G; Möhwald, Helmuth; Sukhorukov, Gleb B

    2010-07-12

    This review is dedicated to recent developments on the topic of light sensitive polymer-based microcapsules. The microcapsules discussed are constructed using the layer-by-layer self-assembly method, which consists in absorbing oppositely charged polyelectrolytes onto charged sacrificial particles. Microcapsules display a broad spectrum of qualities over other existing microdelivery systems such as high stability, longevity, versatile construction and a variety of methods to encapsulate and release substances. Release and encapsulation of materials by light is a particularly interesting topic. Microcapsules can be made sensitive to light by incorporation of light sensitive polymers, functional dyes and metal nanoparticles. Optically active substances can be inserted into the shell during their assembly as a polymer complex or following the shell preparation. Ultraviolet-addressable microcapsules were shown to allow for remote encapsulation and release of materials. Visible- and infrared- addressable microcapsules offer a large array of release strategies for capsules, from destructive to highly sensitive reversible approaches. Besides the Introduction and Conclusions, this review contains in four sections reviewing the effects of light 1) on polymer-based microcapsules, 2) microcapsules containing metal nanoparticles and 3) functional dyes, as well as a fourth section that revisits the implications of light addressable polymeric microcapsules as a microdelivery system for biological applications. Copyright 2009. Published by Elsevier B.V.

  13. Encapsulation of sorbitan ester-based organogels in alginate microparticles.

    Science.gov (United States)

    Sagiri, Sai S; Pal, Kunal; Basak, Piyali; Rana, Usman Ali; Shakir, Imran; Anis, Arfat

    2014-10-01

    Leaching of the internal apolar phase from the biopolymeric microparticles during storage is a great concern as it undoes the beneficial effects of encapsulation. In this paper, a novel formulation was prepared by encapsulating the sunflower oil-based organogels in alginate microparticles. Salicylic acid and metronidazole were used as the model drugs. The microparticles were prepared by double emulsion methodology. Physico-chemical characterization of the microparticles was done by microscopy, FTIR, XRD, and DSC studies. Oil leaching studies, biocompatibility, mucoadhesivity, in vitro drug release, and the antimicrobial efficiency of the microparticles were also performed. The microparticles were found to be spherical in shape. Gelation of the sunflower oil prevented leaching of the internal phase from the microparticles. Release of drugs from the microparticles followed Fickian kinetics and non-Fickian kinetics in gastric and intestinal environments, respectively. Microparticles showed good antimicrobial activity against both Gram-positive (Bacillus subtilis) and Gram-negative (Escherichia coli) bacteria. The results suggested that the developed formulations hold promise to carry oils without leakage of the internal phase. Encapsulation of organogels within the microparticles has improved the drug entrapment efficiency and improved characteristics for controlled delivery applications.

  14. Encapsulation of aluminium in geopolymers produced from metakaolin

    Science.gov (United States)

    Kuenzel, C.; Neville, T. P.; Omakowski, T.; Vandeperre, L.; Boccaccini, A. R.; Bensted, J.; Simons, S. J. R.; Cheeseman, C. R.

    2014-04-01

    Magnox swarf contaminated with trace levels of Al metal is an important UK legacy waste originated from the fuel rod cladding system used in Magnox nuclear power stations. Composite cements made from Portland cement and blast furnace slag form a potential encapsulation matrix. However the high pH of this system causes the Al metal to corrode causing durability issues. Geopolymers derived from metakaolin are being investigated as an alternative encapsulation matrix for Magnox swarf waste and the corrosion kinetics and surface interactions of Al with metakaolin geopolymer are reported in this paper. It is shown that the pH of the geopolymer paste can be controlled by the selection of metakaolin and the sodium silicate solution used to form the geopolymer. A decrease in pH of the activation solution reduces corrosion of the Al metal and increases the stability of bayerite and gibbsite layers formed on the Al surface. The bayerite and gibbsite act as a passivation layer which inhibits further corrosion and mitigates H2 generation. The research shows that optimised metakaolin geopolymers have potential to be used to encapsulate legacy Magnox swarf wastes.

  15. Enhanced catalytic activity of lipase encapsulated in PCL nanofibers.

    Science.gov (United States)

    Song, Jie; Kahveci, Derya; Chen, Menglin; Guo, Zheng; Xie, Erqing; Xu, Xuebing; Besenbacher, Flemming; Dong, Mingdong

    2012-04-10

    Use of biocatalysis for industrial synthetic chemistry is on the verge of significant growth. Enzyme immobilization as an effective strategy for improving the enzyme activity has emerged from developments especially in nanoscience and nanotechnology. Here, lipase from Burkholderia cepacia (LBC), as an example of the luxuriant enzymes, was successfully encapsulated in polycaprolactone (PCL) nanofibers, proven by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Evaluated in both organic and aqueous medium, the activation factor of the encapsulated enzymes in the hydrolysis reaction was generally higher than that in the transesterification reaction. Enhanced catalytic activities were found when 5-20 w/w % of LBC was loaded. The effect of different solvents pretreatment on the activity of immobilized LBC was also investigated. The highest activation factor was found up to 14 for the sample containing acetone-treated LBC/PCL (10 w/w %). The encapsulated lipase reserved 50% of its original activity after the 10th run in the transesterification reaction in hexane medium. The mechanism of activation of lipase catalytic ability based on active PCL nanofiberous matrix is proposed. © 2012 American Chemical Society

  16. Atomically Precise Nanocluster Assemblies Encapsulating Plasmonic Gold Nanorods.

    Science.gov (United States)

    Chakraborty, Amrita; Fernandez, Ann Candice; Som, Anirban; Mondal, Biswajit; Natarajan, Ganapati; Paramasivam, Ganesan; Lahtinen, Tanja; Häkkinen, Hannu; Nonappa, Nonappa; Pradeep, Thalappil

    2018-04-01

    We present the self-assembled structures of atomically precise, ligand-protected noble metal nanoclusters leading to encapsulation of plasmonic gold nanorods (GNRs). Unlike highly sophisticated DNA nanotechnology, our approach demonstrates a strategically simple hydrogen bonding-directed self-assembly of nanoclusters leading to octahedral nanocrystals encapsulating GNRs. Specifically, we use the p-mercaptobenzoic acid (pMBA) protected atomically precise nanocluster, Na4[Ag44(pMBA)30] and pMBA functionalized GNRs. High resolution transmission and scanning transmission electron tomographic reconstructions suggest that the geometry of the GNR surface is responsible for directing the assembly of silver nanoclusters via H-bonding leading to octahedral symmetry. Further, use of water dispersible gold nanoclusters, Au~250(pMBA)n and Au102(pMBA)44 also formed layered shells encapsulating GNRs. Such cluster assemblies on colloidal particles present a new category of precision hybrids with diverse possibilities. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Encapsulation of aluminium in geopolymers produced from metakaolin

    Energy Technology Data Exchange (ETDEWEB)

    Kuenzel, C. [Department of Civil and Environmental Engineering, Imperial College London (United Kingdom); Centre for Advanced Structural Ceramics, Department of Materials, Imperial College London (United Kingdom); Neville, T.P. [Centre for CO_2 Technology, Department of Chemical Engineering, University College London (United Kingdom); Omakowski, T. [Flowcrete, Group Ltd., Cheshire (United Kingdom); Vandeperre, L. [Centre for Advanced Structural Ceramics, Department of Materials, Imperial College London (United Kingdom); Boccaccini, A.R. [Institute of Biomaterials, University of Erlangen-Nuremberg (Germany); Bensted, J.; Simons, S.J.R. [Centre for CO_2 Technology, Department of Chemical Engineering, University College London (United Kingdom); Cheeseman, C.R., E-mail: c.cheeseman@imperial.ac.uk [Department of Civil and Environmental Engineering, Imperial College London (United Kingdom)

    2014-04-01

    Magnox swarf contaminated with trace levels of Al metal is an important UK legacy waste originated from the fuel rod cladding system used in Magnox nuclear power stations. Composite cements made from Portland cement and blast furnace slag form a potential encapsulation matrix. However the high pH of this system causes the Al metal to corrode causing durability issues. Geopolymers derived from metakaolin are being investigated as an alternative encapsulation matrix for Magnox swarf waste and the corrosion kinetics and surface interactions of Al with metakaolin geopolymer are reported in this paper. It is shown that the pH of the geopolymer paste can be controlled by the selection of metakaolin and the sodium silicate solution used to form the geopolymer. A decrease in pH of the activation solution reduces corrosion of the Al metal and increases the stability of bayerite and gibbsite layers formed on the Al surface. The bayerite and gibbsite act as a passivation layer which inhibits further corrosion and mitigates H{sub 2} generation. The research shows that optimised metakaolin geopolymers have potential to be used to encapsulate legacy Magnox swarf wastes.

  18. Encapsulation of Perovskite Solar Cells for High Humidity Conditions.

    Science.gov (United States)

    Dong, Qi; Liu, Fangzhou; Wong, Man Kwong; Tam, Ho Won; Djurišić, Aleksandra B; Ng, Annie; Surya, Charles; Chan, Wai Kin; Ng, Alan Man Ching

    2016-09-22

    We examined different encapsulation strategies for perovskite solar cells by testing the device stability under continuous illumination, elevated temperature (85 °C) and ambient humidity of 65 %. The effects of the use of different epoxies, protective layers and the presence of desiccant were investigated. The best stability (retention of ∼80 % of initial efficiency on average after 48 h) was obtained for devices protected by a SiO 2 film and encapsulated with a UV-curable epoxy including a desiccant sheet. However, the stability of ZnO-based cells encapsulated by the same method was found to be inferior to that of TiO 2 -based cells. Finally, outdoor performance tests were performed for TiO 2 -based cells (30-90 % ambient humidity). All the stability tests were performed following the established international summit on organic photovoltaic stability (ISOS) protocols for organic solar cell testing (ISOS-L2 and ISOS-O1). © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Biological applications of zinc imidazole framework through protein encapsulation

    Science.gov (United States)

    Kumar, Pawan; Bansal, Vasudha; Paul, A. K.; Bharadwaj, Lalit M.; Deep, Akash; Kim, Ki-Hyun

    2016-10-01

    The robustness of biomolecules is always a significant challenge in the application of biostorage in biotechnology or pharmaceutical research. To learn more about biostorage in porous materials, we investigated the feasibility of using zeolite imidazolate framework (ZIF-8) with respect to protein encapsulation. Here, bovine serum albumin (BSA) was selected as a model protein for encapsulation with the synthesis of ZIF-8 using water as a media. ZIF-8 exhibited excellent protein adsorption capacity through successive adsorption of free BSA with the formation of hollow crystals. The loading of protein in ZIF-8 crystals is affected by the molecular weight due to diffusion-limited permeation inside the crystals and also by the affinity of the protein to the pendent group on the ZIF-8 surface. The polar nature of BSA not only supported adsorption on the solid surface, but also enhanced the affinity of crystal spheres through weak coordination interactions with the ZIF-8 framework. The novel approach tested in this study was therefore successful in achieving protein encapsulation with porous, biocompatible, and decomposable microcrystalline ZIF-8. The presence of both BSA and FITC-BSA in ZIF-8 was confirmed consistently by spectroscopy as well as optical and electron microscopy.

  20. Biological applications of zinc imidazole framework through protein encapsulation

    Directory of Open Access Journals (Sweden)

    Pawan Kumar

    2015-12-01

    Full Text Available Abstract The robustness of biomolecules is always a significant challenge in the application of biostorage in biotechnology or pharmaceutical research. To learn more about biostorage in porous materials, we investigated the feasibility of using zeolite imidazolate framework (ZIF-8 with respect to protein encapsulation. Here, bovine serum albumin (BSA was selected as a model protein for encapsulation with the synthesis of ZIF-8 using water as a media. ZIF-8 exhibited excellent protein adsorption capacity through successive adsorption of free BSA with the formation of hollow crystals. The loading of protein in ZIF-8 crystals is affected by the molecular weight due to diffusion-limited permeation inside the crystals and also by the affinity of the protein to the pendent group on the ZIF-8 surface. The polar nature of BSA not only supported adsorption on the solid surface, but also enhanced the affinity of crystal spheres through weak coordination interactions with the ZIF-8 framework. The novel approach tested in this study was therefore successful in achieving protein encapsulation with porous, biocompatible, and decomposable microcrystalline ZIF-8. The presence of both BSA and FITC–BSA in ZIF-8 was confirmed consistently by spectroscopy as well as optical and electron microscopy.

  1. Cellular Silica Encapsulation for Development of Robust Cell Based Biosensors

    Science.gov (United States)

    Johnston, Robert; Rogelj, Snezna; Harper, Jason; Tartis, Michaelann

    2014-03-01

    In order to detect chemical and biological threats both on the battlefield and in civilian life, development of portable, robust detection systems capable of real-time identification of the chemical and biological agents are needed. Living cell-based sensors have proven effective as sensitive, specific, near real-time detectors; however, living cell-based sensors require frequent cell replenishment due to cell sensitivity to the ex-vivo environment, which limits sensor stability. Incorporation of living cells within a biocompatible matrix that provides mechanical protection and maintains access to the external environment may facilitate the development of long-term stable cell-based biosensors. We are exploring the use of a novel Chemical Vapor into Liquid (CViL) deposition process for whole cell encapsulation in silica. In CViL, the high vapor pressure of common silica alkoxides is utilized to deliver silica into an aqueous medium, creating a silica sol. Mixing of cells with the resulting silica sol facilitates encapsulation of cells in silica while minimizing cell contact with the cytotoxic products of silica generating reactions. Using fluorescence microscopy analysis with multiple silica specific markers, encapsulation of multiple eukaryotic cell types (Saccharomyces cerevisiae, Jurkat, HeLa, and U87 cells) with CViL generated silica is shown, providing a foundation for development of long -term stable cell-based biosensors with diverse sensing capabilities.

  2. Nootkatone encapsulation by cyclodextrins: Effect on water solubility and photostability.

    Science.gov (United States)

    Kfoury, Miriana; Landy, David; Ruellan, Steven; Auezova, Lizette; Greige-Gerges, Hélène; Fourmentin, Sophie

    2017-12-01

    Nootkatone (NO) is a sesquiterpenoid volatile flavor, used in foods, cosmetics and pharmaceuticals, possessing also insect repellent activity. Its application is limited because of its low aqueous solubility and stability; this could be resolved by encapsulation in cyclodextrins (CDs). This study evaluated the encapsulation of NO by CDs using phase solubility studies, Isothermal Titration Calorimetry, Nuclear Magnetic Resonance spectroscopy and molecular modeling. Solid CD/NO inclusion complex was prepared and characterized for encapsulation efficiency and loading capacity using UV-Visible. Thermal properties were investigated by thermogravimetric-differential thermal analysis and release studies were performed using multiple headspace extraction. Formation constants (K f ) proved the formation of stable inclusion complexes. NO aqueous solubility, photo- and thermal stability were enhanced and the release could be insured from solid complex in aqueous solution. This suggests that CDs are promising carrier to improve NO properties and, consequently, to enlarge its use in foods, cosmetics, pharmaceuticals and agrochemicals preparations. Copyright © 2016 Elsevier Ltd. All rights reserved.

  3. Islet transplantation in rodents: do encapsulated islets really work?

    Directory of Open Access Journals (Sweden)

    Yngrid Ellyn Dias Maciel de Souza

    2011-06-01

    Full Text Available CONTEXT: Diabetes mellitus type I affects around 240 million people in the world and only in the USA 7.8% of the population. It has been estimated that the costs of its complications account for 5% to 10% of the total healthcare spending around the world. According to World Health Organization, 300 million people are expected to develop diabetes mellitus by the year 2025. The pancreatic islet transplantation is expected to be less invasive than a pancreas transplant, which is currently the most commonly used approach. OBJECTIVES: To compare the encapsulated and free islet transplantation in rodents looking at sites of islet implantation, number of injected islets, viability and immunosuppression. METHODS: A literature search was conducted using MEDLINE/PUBMED and SCIELO with terms about islet transplantation in the rodent from 2000 to 2010. We found 2,636 articles but only 56 articles from 2000 to 2010 were selected. RESULTS: In these 56 articles used, 34% were encapsulated and 66% were nonencapsulated islets. Analyzing both types of islets transplantation, the majority of the encapsulated islets were implanted into the peritoneal cavity and the nonencapsulated islets into the liver, through the portal vein. In addition, the great advantage of the peritoneal cavity as the site of islet transplantation is its blood supply. Both vascular endothelial cells and vascular endothelial growth factor were used to stimulate angiogenesis of the islet grafts, increasing the vascularization rapidly after implantation. It also has been proven that there is influence of the capsules, since the larger the capsule more chances there are of central necrosis. In some articles, the use of immunosuppression demonstrated to increase the life expectancy of the graft. CONCLUSION: While significant progress has been made in the islets transplantation field, many obstacles remain to be overcome. Microencapsulation provides a means to transplant islets without

  4. Assistance algorithm of nursing for amiodarone intravenous infusion

    Directory of Open Access Journals (Sweden)

    Francimar Tinoco de Oliveira

    2014-12-01

    Full Text Available This study aimed at identifying scientific publication on phlebitis caused by amiodarone and proposes a nursing care algorithm for interventions in intravenous amiodarone administration grounded in the Infusion Nursing Society and the Center for Disease Control and Prevention. It is a descriptive study mediated by integrative review in MedLine, LILACS, IBECS, BDENF, Cochrane Library and Scielo bases, published from 2006 to 2013. The sample consisted of nine articles. The evidence pointed the incidence of phlebitis due to the infusion of amiodarone and the need to control this event. The algorithm proposed shows the materials to be used and the procedure of drug administration in order to minimize injury. Besides subsidizing the development of future studies, this algorithm also promotes the incorporation of the best recommendation for the interventionist clinical practice.

  5. Phytochemicals and bioactivity in wild German and Roman chamomiles infusions

    OpenAIRE

    Guimarães, Rafaela; Barros, Lillian; Calhelha, Ricardo C.; Carvalho, Ana Maria; Queiroz, Maria João R.P.; Ferreira, Isabel C.F.R.

    2013-01-01

    Natural matrices represent a rich source of biologically active compounds and are an example of molecular diversity, with recognized potential in drug discovery. In the present work, the infusions of Matricaria recutita L. (German chamomile) and Chamaemelum nobile L. (Roman chamomile) were submitted to an analysis of phenolic compounds and evaluation of bioactivity. Phenolic compounds were characterized by reversed-phase high performance liquid chromatography coupled to diode a...

  6. Liquid infused porous surfaces for mineral fouling mitigation.

    Science.gov (United States)

    Charpentier, Thibaut V J; Neville, Anne; Baudin, Sophie; Smith, Margaret J; Euvrard, Myriam; Bell, Ashley; Wang, Chun; Barker, Richard

    2015-04-15

    Prevention of mineral fouling, known as scale, is a long-standing problem in a wide variety of industrial applications, such as oil production, water treatment, and many others. The build-up of inorganic scale such as calcium carbonate on surfaces and facilities is undesirable as it can result in safety risks and associated flow assurance issues. To date the overwhelming amount of research has mainly focused on chemical inhibition of scale bulk precipitation and little attention has been paid to deposition onto surfaces. The development of novel more environmentally-friendly strategies to control mineral fouling will most probably necessitate a multifunctional approach including surface engineering. In this study, we demonstrate that liquid infused porous surfaces provide an appealing strategy for surface modification to reduce mineral scale deposition. Microporous polypyrrole (PPy) coatings were fabricated onto stainless steel substrates by electrodeposition in potentiostatic mode. Subsequent infusion of low surface energy lubricants (fluorinated oil Fluorinert FC-70 and ionic liquid 1-Butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMIm)) into the porous coatings results in liquid-repellent slippery surfaces. To assess their ability to reduce surface scaling the coatings were subjected to a calcium carbonate scaling environment and the scale on the surface was quantified using Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES). PPy surfaces infused with BMIm (and Fluorinert to a lesser extent) exhibit remarkable antifouling properties with the calcium carbonate deposition reduced by 18 times in comparison to untreated stainless steel. These scaling tests suggest a correlation between the stability of the liquid infused surfaces in artificial brines and fouling reduction efficiency. The current work shows the great potential of such novel coatings for the management of mineral scale fouling. Copyright © 2014 Elsevier Inc. All rights

  7. [Unusual intimal and endocardial damage following suicidal infusion of thiobutabarbital].

    Science.gov (United States)

    Lieske, K; Püschel, K; Schmoldt, A

    1987-01-01

    A suicide is reported that was carried out by i.v. infusion of thiobutabarbital. The most impressive findings were macroscopical alterations in the venous endothelium, the endocardium of the right atrium and ventricle, and the endothelium of the pulmonary artery. The same local cytotoxic side effects could be reproduced in animal experiments. The lesions are most striking after circulatory stagnation in the agonal and supravital period when highly concentrated thiobarbiturates come into contact with the endothelium.

  8. Hospital selection of home infusion therapy companies as preferred providers.

    Science.gov (United States)

    Rich, D S; Ayers, N

    1992-07-01

    The process by which a hospital selected home infusion therapy providers is described. Administrators at a 379-bed teaching hospital decided to attempt to reduce the high mean length of stay by expanding the use of home infusion therapy. Direct diversification into this field by the hospital was not feasible, so it was decided to establish contractual agreements with providers. A task force was appointed to evaluate and choose vendors in the area and to increase the number of patient referrals. The task force examined reports on past experience with providers, price lists, the range and level of services offered, and the amount of free care given and visited the companies' facilities. The group designated three providers as preferred and two as unacceptable. The number of patients referred increased from 21 during the 12 months before the task force was convened to 46 in the first 9 months afterward, for a saving of 2198 patients days. After one year the task force met again to consider company requests for evaluation or reevaluation, establish a plan for publicizing the benefits of home infusion therapy, and replace the site visits with a requirement for accreditation by the Joint Commission. After two years, the task force developed provider-evaluation criteria to streamline the process and reflect the experience gained. The responsibility for reviewing providers was transferred to the P&T committee. When a direct venture into home infusion therapy is not fiscally desirable, contracting for services can still offer the advantages of reduced length of stay and decreased drug expenses.

  9. Use of propofol infusion in alcohol withdrawal-induced refractory delirium tremens

    DEFF Research Database (Denmark)

    Lorentzen, Kristian; Lauritsen, Anne Øberg; Bendtsen, Asger Ole

    2014-01-01

    in case reports. We aimed to evaluate the treatment of delirium tremens with propofol infusion for 48 h. MATERIAL AND METHODS: This study was a single-centre retrospective cohort analysis of 15 patient journals covering the period from May 2012 to September 2013. RESULTS: Five women and ten men were...... and mechanically ventilated in the intensive care unit. The mean propofol infusion rate was 4.22 mg/kg/h. Thirteen patients received supplemental infusion of opioids, whereas seven required concomitant vasopressor infusion. Once propofol infusion was discontinued after 48 h, 12 patients had a long awakening...

  10. Improving the sweet aftertaste of green tea infusion with tannase.

    Science.gov (United States)

    Zhang, Ying-Na; Yin, Jun-Feng; Chen, Jian-Xin; Wang, Fang; Du, Qi-Zhen; Jiang, Yong-Wen; Xu, Yong-Quan

    2016-02-01

    The present study aims to improve the sweet aftertaste and overall acceptability of green tea infusion by hydrolyzing (-)-epigallocatechin gallate (EGCG) and (-)-epicatechin gallate (ECG) with tannase. The results showed that the intensity of the sweet aftertaste and the score of overall acceptability of the green tea infusion significantly increased with the extension of the hydrolyzing treatment. (-)-Epigallocatechin (EGC) and (-)-epicatechin (EC) were found to be the main contributors for the sweet aftertaste, based on a trial compatibility with EGCG, ECG, EGC, and EC monomers, and a synergistic action between EGC and EC to sweet aftertaste was observed. A 2.5:1 (EGC/EC) ratio with a total concentration of 3.5 mmol/L gave the most satisfying sweet aftertaste, and the astringency significantly inhibited the development of the sweet aftertaste. These results can help us to produce a tea beverage with excellent sweet aftertaste by hydrolyzing the green tea infusion with tannase. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Metabolic acidosis, rhabdomyolysis, and cardiovascular collapse after prolonged propofol infusion.

    Science.gov (United States)

    Cannon, M L; Glazier, S S; Bauman, L A

    2001-12-01

    The authors present the hospital course of a 13-year-old girl with a closed head injury who received a prolonged infusion of propofol for sedation and, subsequently, died as a result of severe metabolic acidosis, rhabdomyolysis, and cardiovascular collapse. The patient had been treated for 4 days at a referring hospital for a severe closed head injury sustained in a fall from a bicycle. During treatment for elevations of intracranial pressure, she received a continuous propofol infusion (100 microg/kg/min). The patient began to exhibit severe high anion gap/low lactate metabolic acidosis, and was transferred to the pediatric intensive care unit at the authors' institution. On arrival there, the patient's Glasgow Coma Scale score was 3 and this remained unchanged during her brief stay. The severe metabolic acidosis was unresponsive to maximum therapy. Acute renal failure ensued as a result of rhabdomyolysis, and myocardial dysfunction with bizarre, wide QRS complexes developed without hyperkalemia. The patient died of myocardial collapse with severe metabolic acidosis and multisystem organ failure (involving renal, hepatic, and cardiac systems) approximately 15 hours after admission to the authors' institution. This patient represents another case of severe metabolic acidosis, rhabdomyolysis, and cardiovascular collapse observed after a prolonged propofol infusion in a pediatric patient. The authors suggest selection of other pharmacological agents for long-term sedation in pediatric patients.

  12. Mentoring and Argumentation in a Game-Infused Science Curriculum

    Science.gov (United States)

    Gould, Deena L.; Parekh, Priyanka

    2017-11-01

    Engaging in argumentation from evidence is challenging for most middle school students. We report the design of a media-based mentoring system to support middle school students in engaging in argumentation in the context of a game-infused science curriculum. Our design emphasizes learners apprenticing with college student mentors around the socio-scientific inquiry of a designed video game. We report the results of a mixed-methods study examining the use of this media-based mentoring system with students ages 11 through 14. We observed that the discourse of groups of students that engaged with the game-infused science curriculum while interacting with college student mentors via a social media platform demonstrated statistically significant higher ratings of cognitive, epistemic, and social aspects of argumentation than groups of students that engaged with the social media platform and game-infused science curriculum without mentors. We further explored the differences between the Discourses of the mentored and non-mentored groups. This analysis showed that students in the mentored groups were invited, guided, and socialized into roles of greater agency than students in the non-mentored groups. This increased agency might explain why mentored groups demonstrated higher levels of scientific argumentation than non-mentored groups. Based on our analyses, we argue that media-based mentoring may be designed around a video game to support middle school students in engaging in argumentation from evidence.

  13. Use of continuous infusion pumps during radiation treatment.

    Science.gov (United States)

    Bak, Kate; Gutierrez, Eric; Lockhart, Elizabeth; Sharpe, Michael; Green, Esther; Costa, Sarah; Hertz, Sherrie; Kaizer, Leonard; Whitton, Anthtony; Warde, Padraig

    2013-03-01

    Despite increasing chemoradiotherapy treatment, there is a paucity of information regarding the effects of radiation exposure on ambulatory infusion pumps used to deliver chemotherapy or other essential medications. The aim of this overview is to present the available evidence on this subject, heighten awareness within the clinical community, provide considerations for minimizing possible negative effects on patient care, and encourage the monitoring of infusion devices after exposure to radiation or electromagnetic interference. Published literature was systematically searched using MEDLINE and EMBASE; gray literature was searched using Google and an environmental scan of relevant Web sites. A multidisciplinary working group reviewed the compiled evidence, and a draft of the document was sent to health professionals from various disciplines for an external review. Four reports and three manufacturer device alerts were identified that suggest a risk of pump malfunction as a result of radiation exposure. The estimated cumulative dose at which pump failure has been reported ranges from 28.5 to 42 Gy; however, additional clinical investigations should be undertaken. Pump relocation, pump shielding, and assessment of the pump after radiation exposure are most commonly suggested to minimize pump malfunction related to radiation exposure. A list of additional considerations is offered for those developing institution specific policies and procedures based on the available evidence and expert consensus. The varied and unpredictable results of radiation exposure on infusion devices suggest that additional testing should be carried out to determine the limits of dose exposure and to raise awareness around this patient safety issue.

  14. Statistical agglomeration: peak summarization for direct infusion lipidomics.

    Science.gov (United States)

    Smith, Rob; Anthonymuthu, Tamil S; Ventura, Dan; Prince, John T

    2013-10-01

    Quantification of lipids is a primary goal in lipidomics. In direct infusion/injection (or shotgun) lipidomics, accurate downstream identification and quantitation requires accurate summarization of repetitive peak measurements. Imprecise peak summarization multiplies downstream error by propagating into species identification and intensity estimation. To our knowledge, this is the first analysis of direct infusion peak summarization in the literature. We present two novel peak summarization algorithms for direct infusion samples and compare them with an off-machine ad hoc summarization algorithm as well as with the propriety Xcalibur algorithm. Our statistical agglomeration algorithm reduces peakwise error by 38% mass/charge (m/z) and 44% (intensity) compared with the ad hoc method over three datasets. Pointwise error is reduced by 23% (m/z). Compared with Xcalibur, our statistical agglomeration algorithm produces 68% less m/z error and 51% less intensity error on average on two comparable datasets. The source code for Statistical Agglomeration and the datasets used are freely available for non-commercial purposes at https://github.com/optimusmoose/statistical_agglomeration. Modified Bin Aggolmeration is freely available in MSpire, an open source mass spectrometry package at https://github.com/princelab/mspire/.

  15. Comparative Evaluation of Biofunctional Compounds Content from Different Herbal Infusions

    Directory of Open Access Journals (Sweden)

    Anca C. Fărcaş

    2015-11-01

    Full Text Available Tea is the most important non-alcoholic beverage in the world being appreciated for its stimulant properties and health benefits. The aim of the present study was to evaluate the content in caffeine, phenolic compounds, flavonoids, as well as the antioxidant activity of five different herbal infusion samples in oder to compare the amount of these bioactive compounds from traditional Romanian medicinal plants and Chinese tea plants. Green tea, black tea, linden (lime tea, mint, and St. John's wort were chosen as materials for the preparation of infusion and laboratory analyses. The caffeine was extracted with dichloromethane and then was quantified by measuring the absorbance of the extract at 260 nm. The quantification of total phenolic compounds was achieved by Folin-Ciocalteu method, while the flavonoid content was determined using a chromogenic system of NaNO2-(Al(NO33-NaOH based on spectrophotometric method. The antioxidant capacity of each tea sample was assessed by evaluating their radical scavenging  activity on DPPH radical. The largest content in antioxidant compounds was found in green, but also in the mint infusion sample, while black tea has registered the highest caffeine content. Following the results obtained it can be stated that all the analysed samples contain remarkable amounts of biologically active compounds essential for the human body healt.

  16. [Husk of Venezuelan cocoa as raw material of infusions].

    Science.gov (United States)

    Sangronis, Elba; José Soto, María; Valero, Yolmar; Buscema, Ignacio

    2014-06-01

    In the cocoa bean industry, some by-products go underutilized. Some of these components could provide other innovative products, and such is the case with the husk of the cocoa bean. Previous studies have attributed the husk with a high antioxidant capacity, which added to its relative low cost, makes it an attractive ingredient for the production of infusions. However, prior to promoting it as such, its quality needs to be guaranteed. This study evaluated the chemical composition of the husk of cocoa, its microbiologic quality and other parameters in order to be considered raw material in the preparation of infusions. The cocoa was cultivated in two different states in Venezuela. Moisture, protein, fat, ash, carbohydrates, microbiologic quality and ochratoxin A as well antioxidant properties, content of foreign matter, insoluble ash in HCL and aqueous extract were evaluated in the husk of cocoa seeds. Applied methods were in compliance with national and international norms. Significant differences were determined between the samples through the ANOVA application. A low level in moisture content, but high in ash, along with a microbiologic quality that met the norm, and an absence of ochratoxin A were observed in the totality of the analyzed samples. Low levels of foreign matter, the high value of its aqueous extract and high phenolic compounds content with antioxidant activity allow for the recommendation of the husk of cocoa as raw material for the preparation of infusions.

  17. [Stump pain relieved by continuous intravenous ketamine infusion therapy].

    Science.gov (United States)

    Mizuno, J; Sugimoto, S; Ohmori, T; Itadera, E; Ichikawa, N; Machida, K

    2001-07-01

    We experienced a case of stump pain relieved by continuous intravenous ketamine infusion therapy. A 59-year-old male had his left first through fourth toes amputated because a giant iron plate at work fell on his left foot fifteen years ago. Thereafter he had refractory spontaneous burning pain and night pain on his stump. On examination, we found his left foot skin hard, lustrous, and with sweating disturbance, allodynia and hyperpathia. As intravenous administrations of ketamine 10 mg and thiamylal 50 mg were positive as a drug challenge test, we performed intravenous ketamine infusion at 1 mg.kg-1.hr-1 for 1 hour and a half. After this treatment, his visual analogue scale (VAS) improved dramatically to 0 mm, and night pain, allodynia and hyperpathia disappeared for three days. Thereafter stump pain was relieved to the level of VAS 20 mm. Therefore we diagnosed his stump pain as central pain of neuropathic origin. We suspect that continuous intravenous infusion of ketamine, a noncompetitive blocker of N-methyl-D-aspartic acid receptor, might be an effective and useful alternative treatment in a patient with refractory stump pain.

  18. Mentoring and Argumentation in a Game-Infused Science Curriculum

    Science.gov (United States)

    Gould, Deena L.; Parekh, Priyanka

    2018-04-01

    Engaging in argumentation from evidence is challenging for most middle school students. We report the design of a media-based mentoring system to support middle school students in engaging in argumentation in the context of a game-infused science curriculum. Our design emphasizes learners apprenticing with college student mentors around the socio-scientific inquiry of a designed video game. We report the results of a mixed-methods study examining the use of this media-based mentoring system with students ages 11 through 14. We observed that the discourse of groups of students that engaged with the game-infused science curriculum while interacting with college student mentors via a social media platform demonstrated statistically significant higher ratings of cognitive, epistemic, and social aspects of argumentation than groups of students that engaged with the social media platform and game-infused science curriculum without mentors. We further explored the differences between the Discourses of the mentored and non-mentored groups. This analysis showed that students in the mentored groups were invited, guided, and socialized into roles of greater agency than students in the non-mentored groups. This increased agency might explain why mentored groups demonstrated higher levels of scientific argumentation than non-mentored groups. Based on our analyses, we argue that media-based mentoring may be designed around a video game to support middle school students in engaging in argumentation from evidence.

  19. Infusion pressure and pain during microneedle injection into skin of human subjects

    Science.gov (United States)

    Gupta, Jyoti; Park, Sohyun; Bondy, Brian; Felner, Eric I.; Prausnitz, Mark R.

    2011-01-01

    Infusion into skin using hollow microneedles offers an attractive alternative to hypodermic needle injections. However, the fluid mechanics and pain associated with injection into skin using a microneedle have not been studied in detail before. Here, we report on the effect of microneedle insertion depth into skin, partial needle retraction, fluid infusion flow rate and the co-administration of hyaluronidase on infusion pressure during microneedle-based saline infusion, as well as on associated pain in human subjects. Infusion of up to a few hundred microliters of fluid required pressures of a few hundred mmHg, caused little to no pain, and showed weak dependence on infusion parameters. Infusion of larger volumes up to 1 mL required pressures up to a few thousand mmHg, but still usually caused little pain. In general, injection of larger volumes of fluid required larger pressures and application of larger pressures cause more pain, although other experimental parameters also played a significant role. Among the intradermal microneedle groups, microneedle length had little effect; microneedle retraction lowered infusion pressure but increased pain; lower flow rate reduced infusion pressure and kept pain low; and use of hyaluronidase also lowered infusion pressure and kept pain low. We conclude that microneedles offer a simple method to infuse fluid into the skin that can be carried out with little to no pain. PMID:21684001

  20. Rapid vascular glucose uptake via enzyme-assisted subcutaneous infusion: enzyme-assisted subcutaneous infusion access study.

    Science.gov (United States)

    Soremekun, Olanrewaju A; Shear, Melissa L; Patel, Sagar; Kim, Gina J; Biddinger, Paul D; Parry, Blair A; Yialamas, Maria A; Thomas, Stephen H

    2009-11-01

    Enzyme-assisted subcutaneous infusion (EASI), with subcutaneous human recombinant hyaluronidase pretreatment, may offer an alternative to standard intravenous (IV) access. This study's objectives were to assess paramedic (Emergency Medical Technician-Paramedic [EMTP])-placed EASI access in volunteers to determine (1) feasibility of EMTP EASI access placement; (2) subject/EMTP ratings of placement ease, discomfort, and overall EASI vs IV preference; and (3) speed of intravascular uptake of EASI infusate. Twenty adults underwent 20-gauge IV placement by 4 EMTPs, receiving a 250-mL maximal-rate IV bolus of normal saline. Next, each subject received in the other arm a 20-gauge EASI access line (with 1-mL injection of 150 U of human recombinant hyaluronidase), through which was infused 250 mL D5NS (1 g glucose was labeled with stable tracer 13C). Blood draws enabled gas chromatography/mass spectrometry (GC/MS) assessment of 13C-glucose uptake. Intravenous access and EASI access were compared for time parameters and subject/EMTP ratings. Data were analyzed with median and interquartile range, Kruskal-Wallis testing, Fisher exact test, and regression (GC/MS data). Intravenous access and EASI access were successful in all 20 subjects. Compared with EASI access (all placed in EMTPs rated EASI easier to place than IV; pain ratings were similar for IV and EASI. The GC/MS showed intravascular uptake at all time points. Enzyme-assisted subcutaneous infusion is faster and easier to initiate than IV access; intravascular absorption of EASI-administered fluids begins within minutes.

  1. Mixing in the human carotid artery during carotid drug infusion studied with PET

    International Nuclear Information System (INIS)

    Junck, L.; Koeppe, R.A.; Greenberg, H.S.

    1989-01-01

    The safety and efficacy of drug infusion into the carotid artery require adequate mixing of the infused solution with carotid blood. Using positron emission tomography (PET), we studied the mixing of solutions infused into the human carotid artery in seven patients by analyzing the distribution of [15O]H2O infused into the carotid artery and by vein. At four infusion rates ranging from 0.5 to 10 ml/min, the variability in distribution averaged 16.5-17.8% among the pixels in a large volume of interest, without dependence on the infusion rate. The overall correlation between [15O]H2O influx with arterial infusion and [15O]H2O influx with venous injection was 0.78-0.82 at the four infusion rates, with no trend toward higher correlations at the faster infusion rates. The distribution into the anterior, middle, and posterior cerebral artery territories differed from distribution throughout the entire carotid territory by an average of 6.2-9.6% at the four infusion rates, with no trend toward smaller differences at the faster infusion rates. Infusions performed into a vinyl tube simulating the carotid artery indicated that at 0.5 ml/min, the velocity of fluid exiting the catheter makes no apparent contribution to mixing. We conclude that with infusions at the carotid bifurcation, mixing in the human carotid artery is complete or nearly complete over a wide range of infusion rates. The mixing appears to result from the patterns of blood flow within the artery, and not from jet effects at the catheter tip

  2. Encapsulation of phytosterols and phytosterol esters in liposomes made with soy phospholipids by high pressure homogenization.

    Science.gov (United States)

    Wang, Fan C; Acevedo, Nuria; Marangoni, Alejandro G

    2017-11-15

    Phytosterols and phytosterol esters were encapsulated within large unilamellar liposomes prepared with soy phospholipids using a microfluidizer. The average particle diameter of these liposomal vesicles increased with increasing amounts of encapsulated phytosterols, especially with increasing free sterol content. The phytosterol content, liposomal particle size, and phytosterol encapsulation efficiency started to plateau when liposomes were prepared with MOPS buffer dispersions that contained 50 mg ml -1 soy phospholipid and more than 4% phytosterol blend, suggesting the saturation of phytosterol encapsulation. We proposed an encapsulation mechanism of free sterols and phytosterol esters in liposomes, where free sterols were mainly encapsulated within the lumen of these liposomes as crystals, and sterol esters and some free sterols were incorporated within the phospholipid bilayer of the liposomal membrane. The results from this work could provide the pharmaceutical and nutraceutical industries a practical method to produce loaded liposomes using inexpensive phospholipid mixtures for the delivery of bioactive ingredients.

  3. Novel encapsulation systems and processes for overcoming the challenges of polypharmacy.

    Science.gov (United States)

    Orlu-Gul, Mine; Topcu, Ahmet Alptekin; Shams, Talayeh; Mahalingam, Suntharavathanan; Edirisinghe, Mohan

    2014-10-01

    The encapsulation process has been studied to develop smart drug delivery systems for decades. In particular, micro-encapsulation and nano-encapsulation approaches have gained wide interest in the development of particulate drug delivery and achieved progress in specialties such as nano-medicine. Encapsulation technologies have evolved through various platforms including emulsion solvent evaporation, spray drying and polymer conjugation. Among current encapsulation methods, electrohydrodynamic and microfluidic processes stand out by enabling the making of formulations with uniform shape and nanoscale size. Pressurized gyration is a new method of combining rotation and controlled pressure to produce encapsulated structures of various morphologies. In this review we address key developments in electrohydrodynamic, microfluidic, their combined and new approaches as well as their potential to obtain combined therapies with desired drug release profiles. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. Formulation, stabilisation and encapsulation of bacteriophage for phage therapy.

    Science.gov (United States)

    Malik, Danish J; Sokolov, Ilya J; Vinner, Gurinder K; Mancuso, Francesco; Cinquerrui, Salvatore; Vladisavljevic, Goran T; Clokie, Martha R J; Garton, Natalie J; Stapley, Andrew G F; Kirpichnikova, Anna

    2017-11-01

    Against a backdrop of global antibiotic resistance and increasing awareness of the importance of the human microbiota, there has been resurgent interest in the potential use of bacteriophages for therapeutic purposes, known as phage therapy. A number of phage therapy phase I and II clinical trials have concluded, and shown phages don't present significant adverse safety concerns. These clinical trials used simple phage suspensions without any formulation and phage stability was of secondary concern. Phages have a limited stability in solution, and undergo a significant drop in phage titre during processing and storage which is unacceptable if phages are to become regulated pharmaceuticals, where stable dosage and well defined pharmacokinetics and pharmacodynamics are de rigueur. Animal studies have shown that the efficacy of phage therapy outcomes depend on the phage concentration (i.e. the dose) delivered at the site of infection, and their ability to target and kill bacteria, arresting bacterial growth and clearing the infection. In addition, in vitro and animal studies have shown the importance of using phage cocktails rather than single phage preparations to achieve better therapy outcomes. The in vivo reduction of phage concentration due to interactions with host antibodies or other clearance mechanisms may necessitate repeated dosing of phages, or sustained release approaches. Modelling of phage-bacterium population dynamics reinforces these points. Surprisingly little attention has been devoted to the effect of formulation on phage therapy outcomes, given the need for phage cocktails, where each phage within a cocktail may require significantly different formulation to retain a high enough infective dose. This review firstly looks at the clinical needs and challenges (informed through a review of key animal studies evaluating phage therapy) associated with treatment of acute and chronic infections and the drivers for phage encapsulation. An important driver

  5. Pulsed EPR characterization of encapsulated atomic hydrogen in octasilsesquioxane cages.

    Science.gov (United States)

    Mitrikas, George

    2012-03-21

    Hydrogen atoms encapsulated in molecular cages are potential candidates for quantum computing applications. They provide the simplest two-spin system where the 1s electron spin, S = 1/2, is hyperfine-coupled to the proton nuclear spin, I = 1/2, with a large isotropic hyperfine coupling (A = 1420.40575 MHz for a free atom). While hydrogen atoms can be trapped in many matrices at cryogenic temperatures, it has been found that they are exceptionally stable in octasilsesquioxane cages even at room temperature [Sasamori et al., Science, 1994, 256, 1691]. Here we present a detailed spin-lattice and spin-spin relaxation study of atomic hydrogen encapsulated in Si(8)O(12)(OSiMe(2)H)(8) using X-band pulsed EPR spectroscopy. The spin-lattice relaxation times T(1) range between 1.2 s at 20 K and 41.8 μs at room temperature. The temperature dependence of the relaxation rate shows that for T 100 K a thermally activated process with activation energy E(a) = 753 K (523 cm(-1)) prevails. The phase memory time T(M) = 13.9 μs remains practically constant between 200 and 300 K and is determined by nuclear spin diffusion. At lower temperatures T(M) decreases by an order of magnitude and exhibits two minima at T = 140 K and T = 60 K. The temperature dependence of T(M) between 20 and 200 K is attributed to dynamic processes that average inequivalent hyperfine couplings, e.g. rotation of the methyl groups of the cage organic substituents. The hyperfine couplings of the encapsulated proton and the cage (29)Si nuclei are obtained through numerical simulations of field-swept FID-detected EPR spectra and HYSCORE experiments, respectively. The results are discussed in terms of existing phenomenological models based on the spherical harmonic oscillator and compared to those of endohedral fullerenes.

  6. Supercritical CO2: a ‘green’ route for the encapsulation of drugs

    CSIR Research Space (South Africa)

    Labuschagne, Philip W

    2010-09-01

    Full Text Available such as caffeine, essential oils, antioxidants, omega-3 fats and spices can be extracted3. Solubility of CO2 in various polymers allows for impregnation with small molecules, such as dyes and antioxidants, as well as preparing polymer foams at temperatures well.... By applying a CSIR-patented encapsulation technology inside a supercritical CO2 reactor (Figure 2), it was possible to encapsulate probiotics without loss of activity. In addition, encapsulation successfully enhanced both shelf-life and gastric transit...

  7. Process engineering of high voltage alginate encapsulation of mesenchymal stem cells

    Energy Technology Data Exchange (ETDEWEB)

    Gryshkov, Oleksandr, E-mail: gryshkov@imp.uni-hannover.de [Institute for Multiphase Processes, Leibniz University Hannover, D-30167 Hannover (Germany); Pogozhykh, Denys, E-mail: pogozhykh@imp.uni-hannover.de [Institute for Multiphase Processes, Leibniz University Hannover, D-30167 Hannover (Germany); Zernetsch, Holger, E-mail: zernetsch@imp.uni-hannover.de [Institute for Multiphase Processes, Leibniz University Hannover, D-30167 Hannover (Germany); Hofmann, Nicola, E-mail: hofmann@imp.uni-hannover.de [Institute for Multiphase Processes, Leibniz University Hannover, D-30167 Hannover (Germany); Mueller, Thomas, E-mail: mueller.thomas@mh-hannover.de [Institute for Transfusion Medicine, Medical School Hannover, D-30625 Hannover (Germany); Glasmacher, Birgit, E-mail: glasmacher@imp.uni-hannover.de [Institute for Multiphase Processes, Leibniz University Hannover, D-30167 Hannover (Germany)

    2014-03-01

    Encapsulation of stem cells in alginate beads is promising as a sophisticated drug delivery system in treatment of a wide range of acute and chronic diseases. However, common use of air flow encapsulation of cells in alginate beads fails to produce beads with narrow size distribution, intact spherical structure and controllable sizes that can be scaled up. Here we show that high voltage encapsulation (≥ 15 kV) can be used to reproducibly generate spherical alginate beads (200–400 μm) with narrow size distribution (± 5–7%) in a controlled manner under optimized process parameters. Flow rate of alginate solution ranged from 0.5 to 10 ml/h allowed producing alginate beads with a size of 320 and 350 μm respectively, suggesting that this approach can be scaled up. Moreover, we found that applied voltages (15–25 kV) did not alter the viability and proliferation of encapsulated mesenchymal stem cells post-encapsulation and cryopreservation as compared to air flow. We are the first who employed a comparative analysis of electro-spraying and air flow encapsulation to study the effect of high voltage on alginate encapsulated cells. This report provides background in application of high voltage to encapsulate living cells for further medical purposes. Long-term comparison and work on alginate–cell interaction within these structures will be forthcoming. - Highlights: • High voltage alginate encapsulation of mesenchymal stem cells (MSCs) was designed. • Reproducible and spherical alginate beads were generated via high voltage. • Air flow encapsulation was utilized as a comparative approach to high voltage. • High voltage did not alter the viability and proliferation of encapsulated MSCs. • High voltage encapsulation can be scaled up and applied in cell-based therapy.

  8. High Throughput Single-cell and Multiple-cell Micro-encapsulation

    OpenAIRE

    Lagus, Todd P.; Edd, Jon F.

    2012-01-01

    Microfluidic encapsulation methods have been previously utilized to capture cells in picoliter-scale aqueous, monodisperse drops, providing confinement from a bulk fluid environment with applications in high throughput screening, cytometry, and mass spectrometry. We describe a method to not only encapsulate single cells, but to repeatedly capture a set number of cells (here we demonstrate one- and two-cell encapsulation) to study both isolation and the interactions between cells in groups of ...

  9. Associations between bolus infusion of hydrocortisone, glycemic variability and insulin infusion rate variability in critically Ill patients under moderate glycemic control

    NARCIS (Netherlands)

    van Hooijdonk, Roosmarijn T. M.; Binnekade, Jan M.; Bos, Lieuwe D. J.; Horn, Janneke; Juffermans, Nicole P.; Abu-Hanna, Ameen; Schultz, Marcus J.

    2015-01-01

    We retrospectively studied associations between bolus infusion of hydrocortisone and variability of the blood glucose level and changes in insulin rates in intensive care unit (ICU) patients. 'Glycemic variability' and 'insulin infusion rate variability' were calculated from and expressed as the

  10. Encapsulated lipomas of the tongue in benign symmetric lipomatosis.

    Science.gov (United States)

    Ettl, Tobias; Gaumann, Andreas; Ehrenberg, Ramin; Reichert, Torsten E; Driemel, Oliver

    2009-05-01

    Benign symmetric lipomatosis (Madelung disease) is a rare disorder of unknown etiology characterized by diffuse growth of unencapsulated lipomas predominantly in the head, neck and shoulder region. Involvement of the tongue has been previously described in only five cases. A 49-year-old man with alcoholic liver cirrhosis presented with an 11-year history of benign symmetric lipomatosis complaining of increasing dysphagia, dysarthria and hoarseness. Clinical intraoral examination revealed asymmetric, globular, firm, circumscribed masses on both borders of the tongue. During surgery, the masses seemed encapsulated from surrounding muscles and could easily be extirpated. However, "satellite fat cells" became obvious, which might give rise to the development of new lipomas.

  11. Poly (DADMAC) encapsulation in PES microcapsules utilizing gamma radiation

    International Nuclear Information System (INIS)

    Francis, Sanju; Varshney, Lalit; Tirumalesh, Keesari; Sabharwal, Sunil

    2009-01-01

    In this communication, a method for encapsulation of a polymeric resin using radiation technology is reported. The quaternary ammonium resin, polydiallyldimethylammonium chloride (PDADMAC) was incorporated in the core of a preformed hollow polyethersulfone microcapsule, using radiation technology, for the extraction of anions from aqueous solutions. The idea was to introduce the monomer into the porous microcapsules and initiate polymerization by radiation to trap the polymer formed inside the capsule. The resultant capsule was able to take up and exchange some anions (F - , Cl - , Br - , NO 3 2- and SO 4 2- ) at relatively low concentrations

  12. Core-shell hydrogel microcapsules for improved islets encapsulation.

    Science.gov (United States)

    Ma, Minglin; Chiu, Alan; Sahay, Gaurav; Doloff, Joshua C; Dholakia, Nimit; Thakrar, Raj; Cohen, Joshua; Vegas, Arturo; Chen, Delai; Bratlie, Kaitlin M; Dang, Tram; York, Roger L; Hollister-Lock, Jennifer; Weir, Gordon C; Anderson, Daniel G

    2013-05-01

    Islets microencapsulation holds great promise to treat type 1 diabetes. Currently used alginate microcapsules often have islets protruding outside capsules, leading to inadequate immuno-protection. A novel design of microcapsules with core-shell structures using a two-fluid co-axial electro-jetting is reported. Improved encapsulation and diabetes correction is achieved in a single step by simply confining the islets in the core region of the capsules. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Promising design options for the encapsulated nuclear heat source reactor

    Energy Technology Data Exchange (ETDEWEB)

    Conway, L.; Carelli, M.D.; Dzodzo, M. [Westinghouse Science and Technology, Pittsburgh, PA (United States); Hossain, Q.; Brown, N.W. [Lawrence Livermore National Lab., CA (United States); Wade, D.C.; Sienick, J.J. [Argonne National Lab., IL (United States); Greenspan, E.; Kastenberg, W.E.; Saphier, D. [University of California Dept of Nuclear Engineering, Berkeley, CA (United States)

    2001-07-01

    Promising design options for the Encapsulated Nuclear Heat Source (ENHS) liquid-metal cooled fast reactor were identified during the first year of the DOE NERI program sponsored feasibility study. Many opportunities for incorporation of innovations in design and fabrication were identified. Three of the innovations are hereby described: a novel IHX (intermediate heat exchanger) made of a relatively small number of rectangular channels, an ENHS module design featuring 100% natural circulation, and a novel conceptual design of core support and fuelling. As a result of the first year study the ENHS concept appears more practical and more promising than perceived at the outset of this study. (authors)

  14. Cementing a wellbore using cementing material encapsulated in a shell

    Energy Technology Data Exchange (ETDEWEB)

    Aines, Roger D.; Bourcier, William L.; Duoss, Eric B.; Spadaccini, Christopher M.; Cowan, Kenneth Michael

    2016-08-16

    A system for cementing a wellbore penetrating an earth formation into which a pipe extends. A cement material is positioned in the space between the wellbore and the pipe by circulated capsules containing the cement material through the pipe into the space between the wellbore and the pipe. The capsules contain the cementing material encapsulated in a shell. The capsules are added to a fluid and the fluid with capsules is circulated through the pipe into the space between the wellbore and the pipe. The shell is breached once the capsules contain the cementing material are in position in the space between the wellbore and the pipe.

  15. Cementing a wellbore using cementing material encapsulated in a shell

    Energy Technology Data Exchange (ETDEWEB)

    Aines, Roger D.; Bourcier, William L.; Duoss, Eric B.; Floyd, III, William C.; Spadaccini, Christopher M.; Vericella, John J.; Cowan, Kenneth Michael

    2017-03-14

    A system for cementing a wellbore penetrating an earth formation into which a pipe extends. A cement material is positioned in the space between the wellbore and the pipe by circulated capsules containing the cement material through the pipe into the space between the wellbore and the pipe. The capsules contain the cementing material encapsulated in a shell. The capsules are added to a fluid and the fluid with capsules is circulated through the pipe into the space between the wellbore and the pipe. The shell is breached once the capsules contain the cementing material are in position in the space between the wellbore and the pipe.

  16. Promising design options for the encapsulated nuclear heat source reactor

    International Nuclear Information System (INIS)

    Conway, L.; Carelli, M.D.; Dzodzo, M.; Hossain, Q.; Brown, N.W.; Wade, D.C.; Sienick, J.J.; Greenspan, E.; Kastenberg, W.E.; Saphier, D.

    2001-01-01

    Promising design options for the Encapsulated Nuclear Heat Source (ENHS) liquid-metal cooled fast reactor were identified during the first year of the DOE NERI program sponsored feasibility study. Many opportunities for incorporation of innovations in design and fabrication were identified. Three of the innovations are hereby described: a novel IHX (intermediate heat exchanger) made of a relatively small number of rectangular channels, an ENHS module design featuring 100% natural circulation, and a novel conceptual design of core support and fuelling. As a result of the first year study the ENHS concept appears more practical and more promising than perceived at the outset of this study. (authors)

  17. Accelerated Infliximab Infusion: Safety, Factors Predicting Adverse Events, Patients' Satisfaction and Cost Analysis. A Cohort Study in IBD Patients.

    Science.gov (United States)

    Mazzuoli, S; Tricarico, D; Demma, F; Furneri, G; Guglielmi, F W

    2016-01-01

    Standard Infliximab infusion consists of a 2-hour intravenous administration. Recently, Infliximab shortened infusion has been included in the Infliximab label as possible maintenance regimen for patients tolerating Infliximab induction therapy. To verify if accelerated 1-hour Infliximab infusions are as safe as standard administrations, in patients with Inflammatory Bowel Disease. Seventy-four patients treated between September 2008 and November 2014 were evaluated. Patients were eligible for 1-hour infusion if they had no history of infusion reactions during the previous 2-hour infusions. Twenty-three patients received 2-hour infusions, 16 patients received 1-hour infusions, 35 patients received 2-hour infusions followed by 1-hour infusions. A total of 1,123 Infliximab infusions were administered. The proportion of patients experiencing infusion reaction was: 4% over the 1-hour infusions and 9% over the 2-hour (P = 0.318). Adverse reaction/infusion rate was 0.55% over the 1-hour infusions and 0.66% over the 2-hour (P = 0.835). In the logistic model, accelerated infusion was the only statistically significant predictor of infusion reaction risk reduction (-90%; P = 0.024). Mean satisfaction was 8/10 (±0.84) with 1-hour regimen and 6/10 (±0.56) with 2-hour infusions (P = 0.000). The mean total cost was reduced by 47% with the 1-hour regimen (133.54€ and 250.86€ for 1-hour and 2-hour infusions, respectively). Accelerated Infliximab infusion does not increase the acute infusion reaction incidence. In patients with inflammatory bowel disease, the 1-hour regimen should be preferred to 2-hour protocol also due to positive effects on indirect costs and patient's satisfaction.

  18. Develop silicone encapsulation systems for terrestrial silicon solar arrays. Final report

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-12-01

    This work resulted in two basic accomplishments. The first was the identification of DOW CORNING Q1-2577 as a suitable encapsulant material for use in cost effective encapsulation systems. The second was the preparation of a silicon-acrylic cover material containing a durable ultraviolet screening agent for the protection of photo-oxidatively sensitive polymers. The most expeditious method of fabrication is one in which the encapsulant material performs the combined function of adhesive, pottant, and outer cover. The costs of the encapsulant can be minimized by using it as a thin conformal coating. One encapsulation system using silicones was identified which provided protection to photovoltaic cells and survived the JPL qualification tests. This encapsulation system uses DOW CORNING Q1-2577, a conformal coating from Dow Corning, as the combined adhesive, pottant and cover material. The lowest cost encapsulation system using Q1-2577 had Super Dorlux as the substrate structural member. The overall material cost of this encapsulation system is 0.74 cents/ft/sup 2/ (1980 dollars) based on current material prices, which could decrease with increased production of Q1-2577. Subsequent to identifying the best silicone encapsulation system, a silicone acrylic cover material containing a durable ultraviolet screening agent was prepared and its effectiveness in protecting photo-oxidatively sensitive polymers was demonstrated.

  19. Micro-Encapsulation of non-aqueous solvents for energy-efficient carbon capture

    Energy Technology Data Exchange (ETDEWEB)

    Stolaroff, Joshua K; Ye, Congwang; Oakdale, James [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Baker, Sarah; Nugyen, Du; Smith, William; Aines, Roger

    2016-11-14

    Here, we demonstrate micro-encapsulation of several promising designer solvents: an IL, PCIL, and CO2BOL. We develop custom polymers that cure by UV light in the presence of each solvent while maintaining high CO2 permeability. We use several new process strategies to accommodate the viscosity and phase changes. We then measure and compare the CO2 absorption rate and capacity as well as the multi-cycle performance of the encapsulated solvents. These results are compared with previous work on encapsulated sodium carbonate solution. The prospects for designer solvents to reduce the cost of post-combustion capture and the implications for process design with encapsulated solvents are discussed.

  20. Clinical assessment of first pass radionuclide ventriculography after dipyridamole infusion in patients with coronary artery disease

    International Nuclear Information System (INIS)

    Kanaya, Tohru; Tono-oka, Ichiro; Satoh, Satoshi; Yamaguchi, Yoshiko; Hoshi, Hikaru; Ikeda, Kozue; Tsuiki, Kai; Yasui, Shoji; Komatani, Akio

    1986-01-01

    First pass radionuclide ventriculography (RNV) was performed after dipyridamole (D) infusion in 33 patients with coronary artery disease (CAD) and 15 normal volunteers. RNV findings after D infusion were compared with those of conventional exercise RNV and body surface ECG mapping (MAP). For patients with multiple vessel disease, left ventricular ejection fraction (LVEF) was significantly lower after D infusion than at rest. Wall motion abnormality (WMA) sites induced by D infusion were well coincident with those induced by exercise. Pressure rate product at exercise was significantly higher than that after D infusion, suggesting the different mechanism of the occurrence of WMA after D infusion and at exercise. The incidence of ischemic reaction tended to be higher after D infusion than at exercise in 25 patients with CAD. There was negative correlation between ST depression on MAP after D infusion and LVEF on RNV after D infusion. This RNV after D infusion can be used as a supplement tool to conventional exercise RNV in the evaluation of the degree of coronary artery lesions and preserved left ventricular function. (Namekawa, K.)

  1. Continuous versus Intermittent Infusions of Ceftazidime for Treating Exacerbation of Cystic Fibrosis▿

    Science.gov (United States)

    Hubert, Dominique; Le Roux, Evelyne; Lavrut, Thibaud; Wallaert, Benoit; Scheid, Philippe; Manach, Dominique; Grenet, Dominique; Sermet-Gaudelus, Isabelle; Ramel, Sophie; Cracowski, Claire; Sardet, Anne; Wizla, Nathalie; Deneuville, Eric; Garraffo, Rodolphe

    2009-01-01

    The present multicenter, randomized crossover study compared the safety and efficacy of continuous infusion with those of short infusions of ceftazidime in patients with cystic fibrosis. Patients with chronic Pseudomonas aeruginosa colonization received two successive courses of intravenous tobramycin and ceftazidime (200 mg/kg of body weight/day) for pulmonary exacerbation administered as thrice-daily short infusions or as a continuous infusion. The primary endpoint was the variation in the forced expiratory volume in 1 s (FEV1) during the course of antibiotic treatment. Sixty-nine of the 70 patients enrolled in the study received at least one course of antibiotic treatment. The improvement in FEV1 at the end of therapy was not statistically different between the two treatment procedures (+7.6% after continuous infusion and +5.5% after short infusions) but was better after continuous ceftazidime treatment in patients harboring resistant isolates (P < 0.05). The interval between the course of antibiotic treatments was longer after the continuous infusion than after the short infusion of ceftazidime (P = 0.04). The mean serum ceftazidime concentration during the continuous infusion was 56.2 ± 23.2 μg/ml; the mean peak and trough concentrations during the short infusions were 216.3 ± 71.5 and 12.1 ± 8.7 μg/ml, respectively. The susceptibility profiles of the P. aeruginosa isolates remained unchanged and were similar for both regimens. Quality-of-life scores were similar whatever the treatment procedure, but 82% of the patients preferred the continuous-infusion regimen. Adverse events were not significantly different between the two regimens. In conclusion, the continuous infusion of ceftazidime did not increase its toxicity and appeared to be as efficient as short infusions in patients with cystic fibrosis as a whole, but it gave better results in patients harboring resistant isolates of P. aeruginosa. PMID:19528265

  2. DEVELOPMENT OF DOMESTIC INFUSION DRUGS BASED ON PARACETAMOL

    Directory of Open Access Journals (Sweden)

    Almakaeva L.G.

    2016-06-01

    Full Text Available The intravenous form of paracetamol compared with oral more reliably supports effective drug concentration in blood plasma that promotes a higher therapeutic effect. Recent studies have confirmed that the use of the intravenous form of paracetamol to deal with postoperative pain multimodal analgesia modes results in reducing the frequency and quantity of opioids administered , and, as a consequence, its associated side effects. The drug Paracetamol , infusion solution 10 mg / ml to 100 ml glass bottles is a drug - generic . His qualitative and quantitative composition is developed from the study of literature data about the drug - similar to " Perfalhan , 10 mg / ml solution for infusion in 100 mL " company Bristol - Myers Squibb, France and experimental work. The aim of our study is development and support of the national composition of the infusion of the drug on the basis of paracetamol, selection of excipients that provide stability of the active substances. Materials and methods. The object of the study was the substance of paracetamol manufactured by Zhejiang Kangle Pharmaceutical Co. , Ltd, China. During the work conducted qualitative and quantitative monitoring sample preparation for indicators of stability: pH content of the active ingredient , transparency, color, impurities , contamination by the methods described in the SFU [and nor- ral documentation to the drug . One potential factor of instability is the effect of paracetamol oxygen, due to the presence in the molecule of paracetamol and -NH possibility of oxidation. Results and Discussion. Paracetamol is derived atsetamina . Substance acetylation are p - aminophenol with acetic anhydride . Saturated aqueous solution has a pH of paracetamol - ment about 6 . Paracetamol is a crystalline white powder , sparingly soluble in water, soluble in 96% alcohol, very slightly soluble in metilenhloride . . Active substance enters in comparison drug in the concentration of 10 mg/ml. Stable

  3. Process Optimization of Bismaleimide (BMI) Resin Infused Carbon Fiber Composite

    Science.gov (United States)

    Ehrlich, Joshua W.; Tate, LaNetra C.; Cox, Sarah B.; Taylor, Brian J.; Wright, M. Clara; Faughnan, Patrick D.; Batterson, Lawrence M.; Caraccio, Anne J.; Sampson, Jeffery W.

    2013-01-01

    Engineers today are presented with the opportunity to design and build the next generation of space vehicles out of the lightest, strongest, and most durable materials available. Composites offer excellent structural characteristics and outstanding reliability in many forms that will be utilized in future aerospace applications including the Commercial Crew and Cargo Program and the Orion space capsule. NASA's Composites for Exploration (CoEx) project researches the various methods of manufacturing composite materials of different fiber characteristics while using proven infusion methods of different resin compositions. Development and testing on these different material combinations will provide engineers the opportunity to produce optimal material compounds for multidisciplinary applications. Through the CoEx project, engineers pursue the opportunity to research and develop repair patch procedures for damaged spacecraft. Working in conjunction with Raptor Resins Inc., NASA engineers are utilizing high flow liquid infusion molding practices to manufacture high-temperature composite parts comprised of intermediate modulus 7 (IM7) carbon fiber material. IM7 is a continuous, high-tensile strength composite with outstanding structural qualities such as high shear strength, tensile strength and modulus as well as excellent corrosion, creep, and fatigue resistance. IM7 carbon fiber, combined with existing thermoset and thermoplastic resin systems, can provide improvements in material strength reinforcement and deformation-resistant properties for high-temperature applications. Void analysis of the different layups of the IM7 material discovered the largest total void composition within the [ +45 , 90 , 90 , -45 ] composite panel. Tensile and compressional testing proved the highest mechanical strength was found in the [0 4] layup. This paper further investigates the infusion procedure of a low-cost/high-performance BMI resin into an IM7 carbon fiber material and the

  4. Is pomegranate peels infusion effective for disinfection of toothbrushes?

    Directory of Open Access Journals (Sweden)

    Priscila Lima de Luna FREIRE

    Full Text Available Abstract Introduction Methods of decontamination or sanitization of toothbrushes have been questioned. Objective This study assessed the effectiveness of pomegranate peels infusion as a disinfectant of toothbrushes against Streptococcus mutans. Material and method A sample of 16 schoolchildren aged between 7 and 9 years performed brushing 5 days/week, with a careful brushing once a day. After each day of brushing, the toothbrushes were washed and sprayed with one disinfectant solution. This procedure was repeated for 4 weeks using one of the different solutions per week: distilled water (G1; negative control, pomegranate (Punica granatum Linn peels infusion (G2, 1% sodium hypochlorite (G3 and 0.12% chlorhexidine digluconate (G4. After the fifth day, toothbrushes were collected for laboratory analysis. Toothbrushes heads were subjected to agitation in saline dilution of 10–1, 10–2,10–3, and 25 μL of each dilution were seeded in mitis salivarius agar culture medium for S. mutans colony-forming unit (CFU counting. One calibrated examiner (Kappa = 0.91 performed the CFU (mL–1 × 104 counts. Kruskal-Wallis and Dunn Multiple Comparison tests were used at a significance level of 5%. Result G1 presented the highest number of CFU (3.9 ± 8.4, followed by G2 (3.2 ± 4.0. No S. mutans growth was observed in G3 and G4. There was no statistically significant difference between G1 and G2 and between G3 and G4 (p>0.05. Conclusion Pomegranate infusion was completely ineffective for the disinfection of toothbrushes against S. mutans when compared with 1% sodium hypochlorite and 0.12% chlorhexidine digluconate solutions.

  5. Intensive intravenous infusion of insulin in diabetic cats.

    Science.gov (United States)

    Hafner, M; Dietiker-Moretti, S; Kaufmann, K; Mueller, C; Lutz, T A; Reusch, C E; Zini, E

    2014-01-01

    Remission occurs in 10-50% of cats with diabetes mellitus (DM). It is assumed that intensive treatment improves β-cell function and increases remission rates. Initial intravenous infusion of insulin that achieves tight glycemic control decreases subsequent insulin requirements and increases remission rate in diabetic cats. Thirty cats with newly diagnosed DM. Prospective study. Cats were randomly assigned to one of 2 groups. Cats in group 1 (n = 15) received intravenous infusion of insulin with the goal of maintaining blood glucose concentrations at 90-180 mg/dL, for 6 days. Cats in group 2 (n = 15) received subcutaneous injections of insulin glargine (cats ≤4 kg: 0.5-1.0 IU, q12h; >4 kg 1.5-2.0 IU, q12h), for 6 days. Thereafter, all cats were treated with subcutaneous injections of insulin glargine and followed up for 6 months. Cats were considered in remission when euglycemia occurred for ≥4 weeks without the administration of insulin. Nonparametric tests were used for statistical analysis. In groups 1 and 2, remission was achieved in 10/15 and in 7/14 cats (P = .46), and good metabolic control was achieved in 3/5 and in 1/7 cats (P = .22), respectively. Overall, good metabolic control or remission occurred in 13/15 cats of group 1 and in 8/14 cats of group 2. In group 1, the median insulin dosage given during the 6-month follow-up was significantly lower than in group 2 (group 1: 0.32 IU/kg/day, group 2: 0.51 IU/kg/day; P = .013). Initial intravenous infusion of insulin for tight glycemic control in cats with DM decreases insulin requirements during the subsequent 6 months. Copyright © 2014 by the American College of Veterinary Internal Medicine.

  6. Carotid artery mixing with diastole-phased pulsed drug infusion

    International Nuclear Information System (INIS)

    Saris, S.C.; Shook, D.R.; Blasberg, R.G.; Dedrick, R.L.; Doppman, J.L.; Bankiewicz, K.S.; Blacklock, J.B.; Oldfield, E.H.

    1987-01-01

    Focal injury to the brain or retina is a frequent complication of drug delivery to the internal carotid artery (ICA) and may be due to poor mixing of the drug with blood at the infusion site. Rhesus monkeys were studied to determine whether phased drug delivery during diastole from a modified pulsatile angiographic injector would improve drug mixing in vivo. A radiolabeled flow tracer, carbon-14-iodoantipyrine ( 14 C-IAP), was injected into the ICA of three monkeys in 80-msec pulses, each ending at least 50 msec before the end of local diastole. Local isotope concentration in the brain was determined by quantitative autoradiography. The ratio of highest to lowest concentration was 1.86 +/- 0.26 (mean +/- standard deviation) in the frontoparietal cortex, 1.65 +/- 0.42 in the frontoparietal white matter, 1.89 +/- 0.28 in the temporal cortex, and 1.39 +/- 0.17 in the basal ganglia. These results were similar to recordings in three control animals that received intravenous 14 C-IAP to demonstrate complete drug mixing (1.37 +/- 0.12, 1.41 +/- 0.11, 1.70 +/- 0.08, 1.22 +/- 0.24, respectively), and contrasted to findings in five animals which received continuous intracarotid infusions to demonstrate standard ICA drug delivery (4.54 +/- 2.07, 2.94 +/- 1.45, 5.43 +/- 3.57, 3.60 +/- 2.90, respectively). Pulsed intra-arterial infusion during diastole provides a technically simple method for improving intravascular drug mixing, and results in drug delivery to tissue capillaries that is proportional to blood flow

  7. Liposome encapsulated albumin-paclitaxel nanoparticle for enhanced antitumor efficacy.

    Science.gov (United States)

    Ruttala, Hima Bindu; Ko, Young Tag

    2015-03-01

    Albumin nanoparticles have been explored as a promising delivery system for various therapeutic agents. One limitation of such formulations is their poor colloidal stability in vivo. Present study aimed at enhancing the chemotherapeutic potential of paclitaxel by improving the colloidal stability and pharmacokinetic properties of albumin-paclitaxel nanoparticles (APNs) such as Abraxane®. This was accomplished by encapsulating the preformed APNs into PEGylated liposomal bilayer by thin-film hydration/extrusion technique. The resulting liposome-encapsulated albumin-paclitaxel hybrid nanoparticles (L-APNs) were nanosized (~200 nm) with uniform spherical dimensions. The successful incorporation of albumin-paclitaxel nanoparticle (NP) in liposome was confirmed by size exclusion chromatography analysis. Such hybrid NP showed an excellent colloidal stability even at 100-fold dilutions, overcoming the critical drawback associated with simple albumin-paclitaxel NP system. L-APNs further showed higher cytotoxic activity towards B16F10 and MCF-7 cells than APN; this effect was characterized by arrest at the G2/M phase and a higher prevalence of apoptotic subG1 cells. Finally, pharmacokinetic and biodistribution studies in tumor mice demonstrated that L-APNs showed a significantly enhanced plasma half-life, and preferential accumulation in the tumor. Taken together, the data indicate that L-APNs can be promising therapeutic vehicles for enhanced delivery of PTX to tumor sites.

  8. On-chip Magnetic Separation and Cell Encapsulation in Droplets

    Science.gov (United States)

    Chen, A.; Byvank, T.; Bharde, A.; Miller, B. L.; Chalmers, J. J.; Sooryakumar, R.; Chang, W.-J.; Bashir, R.

    2012-02-01

    The demand for high-throughput single cell assays is gaining importance because of the heterogeneity of many cell suspensions, even after significant initial sorting. These suspensions may display cell-to-cell variability at the gene expression level that could impact single cell functional genomics, cancer, stem-cell research and drug screening. The on-chip monitoring of individual cells in an isolated environment could prevent cross-contamination, provide high recovery yield and ability to study biological traits at a single cell level These advantages of on-chip biological experiments contrast to conventional methods, which require bulk samples that provide only averaged information on cell metabolism. We report on a device that integrates microfluidic technology with a magnetic tweezers array to combine the functionality of separation and encapsulation of objects such as immunomagnetically labeled cells or magnetic beads into pico-liter droplets on the same chip. The ability to control the separation throughput that is independent of the hydrodynamic droplet generation rate allows the encapsulation efficiency to be optimized. The device can potentially be integrated with on-chip labeling and/or bio-detection to become a powerful single-cell analysis device.

  9. Preparation of carboxymethyl cellulose based microgels for cell encapsulation

    Directory of Open Access Journals (Sweden)

    Y. Ke

    2014-11-01

    Full Text Available Biocompatible and biodegradable carboxymethyl cellulose (CMC has been modified with 4-hydroxybenzylamine (CMC-Ph in order to prepare CMC-based microgels through the horseradish peroxidise/hydrogen peroxide enzymatic reaction. CMC-Ph was identified as a blend, and the amount of the grafted 4-hydroxybenzylamine per 100 units of CMC was between 17 and 23 according to the molecular weight of CMC. Through a special designed co-flowing microfluidic device, CMC-Ph microgels were prepared with the radius from 100 to 500 μm via adjusting the flow rates of the disperse phase and the continuous phase, respectively. The chondrocytic cell line ATDC5 was encapsulated in the CMC-Ph microgels. The cell-laden microgels were cultured for up to 40 days, illustrating the biocompatibility of CMC-Ph and the microfluidic approach through the enzymatic crosslinking reaction primarily. CMC-Ph showed a great promise to encapsulate the cells for further fabrication of the injectable scaffolds.

  10. Polyethylene encapsulation of simulated blowdown waste for SEG treatability study

    International Nuclear Information System (INIS)

    Kalb, P.D.

    1993-01-01

    The Environmental and Waste Technology Center is a participating subcontractor in the Scientific Ecology Group (SEG) Treatability Study for Westinghouse Savannah River Co.'s Blowdown Waste. This waste will be generated at the Consolidated Incinerator Facility (CIF) and will consist of the neutralized aqueous scrubber solution from the incinerator. Since the facility is designed to burn low-level radioactive, hazardous, and mixed wastes, the blowdown waste will likely be a mixed waste. Polyethylene encapsulation is an improved treatment method that has been developed at BNL over the last 10 years. Polyethylene is an inert, thermoplastic polymer with a melt temperature of 120 C. The BNL process is a modification of standard plastics extrusion technology that has been utilized successfully by the plastics industry for over 50 years. Polyethylene binder and dry waste material are fed through separate calibrated feeders to the extruder, where the materials are thoroughly mixed, heated to a molten condition, and then extruded into a suitable mold. A monolithic solid waste form results on cooling. The objective of the Phase 1 screening effort was to prepare test specimens of CIF surrogate waste encapsulated in polyethylene for leach testing using EPA's Toxicity Characteristic Leaching Procedure (TCLP). BNL received aqueous CIF surrogate from SEG, pretreated the stimulant for processing, and fabricated TCLP test specimens for analysis at an independent laboratory. Laboratory and processing procedures are described in this letter report

  11. Surface encapsulation process for managing low-level radioactive wastes

    International Nuclear Information System (INIS)

    Unger, S.L.; Telles, R.W.

    1986-01-01

    Current processes for low-level radioactive waste (LLRW) stabilization involve mixing contaminants with a fixative such as cement, asphalt, polyethylene, or vinyl monomers, and subsequently curing the mixtures in containers. These methods give rise to processing difficulties and yield products lacking performance to assure long-term LLRW immobilization. Mixing of LLRW into fixatives is impeded by viscous media and the curing reaction is inhibited by LLRW constituents. Product performance is affected by corrosion of the containers which ultimately expose the cured mixtures to environmental stresses. This process, termed the ''Surface Encapsulation Process,'' circumvents these problems. A thermosetting fixative is employed that mixes readily with LLRW and is highly insensitive to inhibition in curing. The agglomerated mixtures are further stabilized by encapsulation with seamless jackets of corrosion resistant plastic, such as polyethylene. In laboratory-scale investigations, feasibility of the technique was demonstrated for managing a broad spectrum of LLRW simulants including ion-exchange resins, beads, and glasses, and sodium salts. Products tested to date meet all relevant NRC and DOT regulations governing waste fixation. The high waste loadings of the products, use of commodity resins, and processing simplicity indicated our process would provide high performance LLRW stabilization at costs that are competitive to those for processes employing state-of-the-art fixatives. An economic analysis based on managing LLRW generated by commercial power plants (≅1,000 MeW) substantiates the competitive process costs advantages

  12. Feasibility of metallurgical waste encapsulation in a clay formed matrix

    International Nuclear Information System (INIS)

    Juhnevica, I; Kucinska, J; Sardiko, A; Mezinskis, G

    2011-01-01

    As a result of Joint Stock Company 'Liepajas Metalurgs' production process there are produced certain quantity of substances that are harmful for environment and have to be encapsulated into stable structures. Company's target is modification of these substances into products that form stable compounds in order to avoid metal release in environment. Geopolymers can be synthesized from many materials with a high concentration of aluminosilicates such as metakaolin or fly ash. Heavy metal immobilization in geopolymeric structures is not thought to be caused by physical encapsulation alone, but also through adsorption of the metal ions into the geopolymer structure and possibly even bonding of the metal ions into the structure. All samples have been analyzed with X-Ray, FTIR spectroscopy; chemical analysis and compressive strength tests have been performed. Chemical analysis of geopolymeric samples shows that the main component leached from samples during the boiling in water is Na 2 O that can be explained by more alkaline components nature – Na 2 SiO 3 , NaOH, and SO 3 . Fe 2 O 3 and ZnO are not detected in water extracts at all samples.

  13. Encapsulation of Aloe Vera and Its Effect During Yogur Incubation

    Directory of Open Access Journals (Sweden)

    Ricardo Adolfo Parra Huertas

    2014-11-01

    Full Text Available The yogurt is milk derivative highly consumed around the world,as well as aloe vera. Both have reports tocontribute to human health. The purpose of this research is to determine the effect of the addition of capsules with aloe vera during the incubation of yogurt. Aloeverawas encapsulated in alginate at two different concentrations, 1% and 2%,addingthe capsules from the moment of incubation and comparing the effect of the addition of capsules withthe non-addition of them. For these samples were determined: pH, acidity, syneresis, lactic acid bacteria count, sensory evaluation and proximate analysis. The results indicated that for the three treatments pH values and acid behaved similarly to each characteristic of the yogurt during incubation. The lactic acid bacteria count indicated that treatment with capsules containing 2% sodium alginate had higher counts. Sensorially, three treatments had a favorable acceptability; proximate analysis had favorable values . In conclusion,the tests showed the viability of encapsulated aloe vera in the manufacture of yogurt during incubation time without being affected by the concentration of sodium alginate.

  14. Encapsulant Adhesion to Surface Metallization on Photovoltaic Cells

    Energy Technology Data Exchange (ETDEWEB)

    Tracy, Jared; Bosco, Nick; Dauskardt, Reinhold

    2017-11-01

    Delamination of encapsulant materials from PV cell surfaces often appears to originate at regions with metallization. Using a fracture mechanics based metrology, the adhesion of ethylene vinyl acetate (EVA) encapsulant to screen-printed silver metallization was evaluated. At room temperature, the fracture energy Gc [J/m2] of the EVA/silver interface (952 J/m2) was ~70% lower than that of the EVA/antireflective (AR) coating (>2900 J/m2) and ~60% lower than that of the EVA to the surface of cell (2265 J/m2). After only 300 h of damp heat aging, the adhesion energy of the silver interface dropped to and plateaued at ~50-60 J/m2 while that of the EVA/AR coating and EVA/cell remained mostly unchanged. Elemental surface analysis showed that the EVA separates from the silver in a purely adhesive manner, indicating that bonds at the interface were likely displaced in the presence of humidity and chemical byproducts at elevated temperature, which in part accounts for the propensity of metalized surfaces to delaminate in the field.

  15. Effect of nano-encapsulation on photophysical properties of ICG

    Science.gov (United States)

    Gupta, Sharad; Thenkondar, Kumar; Mehta, Hardik; Bahmani, Baharak; Vullev, Valentine; Anvari, Bahman

    2011-03-01

    Indocyanine green (ICG) is an FDA-approved infrared chromophore used for various biomedical applications such as cardiac and hepatic function evaluation, and ophthalmic angiography. Despite its clinical applications, freely dissolved ICG binds non-specifically to various plasma proteins resulting in changes in its near infrared (NIR) emission properties and rapid elimination from the vasculature. To overcome these shortcomings, we have encapsulated ICG within polymeric nano-constructs composed of poly allylamine hydrochloride (PAH) cross-linked with di-sodium hydrogen phosphate (Na2HPO4). To optimize the photophysical properties of nano-encapsulated ICG (NE-ICG) for clinical imaging applications, we report measurements of fluorescent quantum yield (φ) of NE-ICG. Specifically, we constructed capsules of three different diameters (~130, ~240, and ~450 nm). Our preliminary results indicate that NE-ICG shows less quantum yield compared to freely-dissolved ICG. We determined that the 240 nm diameter capsule to have the highest φ and 450 nm diameter capsules to have the least φ at room temperature.

  16. Technological Challenges for Spray Chilling Encapsulation of Functional Food Ingredients

    Directory of Open Access Journals (Sweden)

    Carmen Sílvia Favaro-Trindade

    2013-01-01

    Full Text Available Spray chilling technology (also known as spray cooling and spray congealing technology has been widely studied and used in the pharmaceutical field. In the food industry, this technique is gaining interest and can become useful because functional food formulations can be developed. Spray chilling is a fat-based system, which involves the addition of the component of interest to a molten lipid carrier, and the resulting mixture is fed through an atomiser nozzle. When the nebulised material is put into contact with the environment, which is cooled below the melting point of the matrix material, the vehicle solidifies (due to heat exchange between the molten material and cold air, and solid lipid microparticles are formed at the same time. This technology is fat based, and lipid carriers, such as wax and oil (e.g. palm oil, beeswax, cocoa butter, and kernel oil can be used. This encapsulation technique can potentially change the functionality, reduce the hygroscopicity, mask taste or odour, change solubility, and provide physical protection in addition to allowing the controlled release of these ingredients. This low-cost technology is relatively simple to apply and scale up, and it does not require the use of organic solvents and the application of high temperatures in the process. Therefore, spray chilling encapsulation may facilitate the development and production of functional and enriched foods as it may solve some technological problems associated with the use of certain ingredients, such as those that have high reactivity and low stability.

  17. Thermoplastic encapsulation of waste surrogates by high-shear mixing

    International Nuclear Information System (INIS)

    Lageraaen, P.R.; Kalb, P.D.; Patel, B.R.

    1995-12-01

    Brookhaven National Laboratory (BNL) has developed a robust, extrusion-based polyethylene encapsulation process applicable to a wide range of solid and aqueous low-level radioactive, hazardous and mixed wastes. However, due to the broad range of physical and chemical properties of waste materials, pretreatment of these wastes is often required to make them amenable to processing with polyethylene. As part of the scope of work identified in FY95 open-quotes Removal and Encapsulation of Heavy Metals from Ground Water,close quotes EPA SERDP No. 387, that specifies a review of potential thermoplastic processing techniques, and in order to investigate possible pretreatment alternatives, BNL conducted a vendor test of the Draiswerke Gelimat (thermokinetic) mixer on April 25, 1995 at their test facility in Mahwah, NJ. The Gelimat is a batch operated, high-shear, high-intensity fluxing mixer that is often used for mixing various materials and specifically in the plastics industry for compounding additives such as stabilizers and/or colorants with polymers

  18. Cisplatin encapsulated nanoparticle as a therapeutic agent for anticancer treatment

    Science.gov (United States)

    Eka Putra, Gusti Ngurah Putu; Huang, Leaf; Hsu, Yih-Chih

    2016-03-01

    The knowledge of manipulating size of biomaterials encapsulated drug into nano-scale particles has been researched and developed in treating cancer. Cancer is the second worldwide cause of death, therefore it is critical to treat cancers challenging with therapeutic modality of various mechanisms. Our preliminary investigation has studied cisplatin encapsulated into lipid-based nanoparticle and examined the therapeutic effect on xenografted animal model. We used mice with tumor volume ranging from 195 to 214 mm3 and then few mice were grouped into three groups including: control (PBS), lipid platinum chloride (LPC) nanoparticles and CDDP (cis-diamminedichloroplatinum(II) at dose of 3mg cisplatin /kg body weight. The effect of the treatment was observed for 12 days post-injection. It showed that LPC NPs demonstrated a better therapeutic effect compared to CDDP at same 3mg cisplatin/kg drug dose of tumor size reduction, 96.6% and 11.1% respectively. In addition, mouse body weight loss of LPC, CDDP and PBS treated group are 12.1%, 24.3% and 1.4%. It means that by compared to CDDP group, LPC group demonstrated less side effect as not much reduction of body weight have found. Our findings have shown to be a potential modality to further investigate as a feasible cancer therapy modality.

  19. Self-assembled rosette nanotubes encapsulate and slowly release dexamethasone

    Directory of Open Access Journals (Sweden)

    Chen Y

    2011-05-01

    Full Text Available Yupeng Chen1,2, Shang Song2, Zhimin Yan3, Hicham Fenniri3, Thomas J Webster2,41Department of Chemistry, Brown University, Providence, RI, USA; 2School of Engineering, Brown University, Providence, RI, USA; 3National Institute for Nanotechnology and Department of Chemistry, University of Alberta, Edmonton, Alberta, Canada; 4Department of Orthopedics, Brown University, Providence, RI, USAAbstract: Rosette nanotubes (RNTs are novel, self-assembled, biomimetic, synthetic drug delivery materials suitable for numerous medical applications. Because of their amphiphilic character and hollow architecture, RNTs can be used to encapsulate and deliver hydrophobic drugs otherwise difficult to deliver in biological systems. Another advantage of using RNTs for drug delivery is their biocompatibility, low cytotoxicity, and their ability to engender a favorable, biologically-inspired environment for cell adhesion and growth. In this study, a method to incorporate dexamethasone (DEX, an inflammatory and a bone growth promoting steroid into RNTs was developed. The drug-loaded RNTs were characterized using diffusion ordered nuclear magnetic resonance spectroscopy (DOSY NMR and UV-Vis spectroscopy. Results showed for the first time that DEX can be easily and quickly encapsulated into RNTs and released to promote osteoblast (bone-forming cell functions over long periods of time. As a result, RNTs are presented as a novel material for the targeted delivery of hydrophobic drugs otherwise difficult to deliver.Keywords: nanotubes, drug delivery, self-assembly, physiological conditions

  20. Radiosensitizing Silica Nanoparticles Encapsulating Docetaxel for Treatment of Prostate Cancer.

    Science.gov (United States)

    Belz, Jodi; Castilla-Ojo, Noelle; Sridhar, Srinivas; Kumar, Rajiv

    2017-01-01

    The applications of nanoparticles in oncology include enhanced drug delivery, efficient tumor targeting, treatment monitoring, and diagnostics. The "theranostic properties" associated with nanoparticles have shown enhanced delivery of chemotherapeutic drugs with superior imaging capabilities and minimal toxicities. In conventional chemotherapy, only a fraction of the administered drug reaches the tumor site or cancer cells. For successful translation of these formulations, it is imperative to evaluate the design and properties of these nanoparticles. Here, we describe the design of ultra-small silica nanoparticles to encapsulate a radiosensitizing drug for combined chemoradiation therapy. The small size of nanoparticles allows for better dispersion and uptake of the drug within the highly vascularized tumor tissue. Silica nanoparticles are synthesized using an oil-in-water microemulsion method. The microemulsion method provides a robust synthetic route in which the inner hydrophobic core is used to encapsulate chemotherapy drug, docetaxel while the outer hydrophilic region provides dispersibility of the synthesized nanoparticles in an aqueous environment. Docetaxel is commonly used for treatment of resistant or metastatic prostate cancer, and is known to have radiosensitizing properties. Here, we describe a systematic approach for synthesizing these theranostic nanoparticles for application in prostate cancer.

  1. Liposome encapsulated luteolin showed enhanced antitumor efficacy to colorectal carcinoma

    Science.gov (United States)

    Wu, Guixia; Li, Jing; Yue, Jinqiao; Zhang, Shuying; Yunusi, Kurexi

    2018-01-01

    Luteolin is a falconoid compound that is present in various types of plants and possesses remarkable potential as a chemopreventive agent. However, the poor aqueous solubility of luteolin limits its clinical application. In the present study, an approach towards chemoprevention was explored using liposomes to deliver luteolin, and the antitumor efficacy was investigated in colorectal carcinoma. The present findings demonstrated that luteolin was efficiently encapsulated into liposomes with an encapsulation efficiency as high as 90%. The particle size of the liposomal luteolin (Lipo-Lut) and ζ-potential were optimized. In vitro studies demonstrated that, Lipo-Lut had a significant inhibitory effect on the growth on the CT26 colorectal carcinoma cell line compared with free luteolin (Free-Lut). The in vivo study indicated that Lipo-Lut could achieve superior antitumor effects against CT26 tumor compared with luteolin alone. The present results suggested that liposome delivery of luteolin improved solubility, bioavailability and may have potential applications in chemoprevention in clinical settings. PMID:29207088

  2. Stabilization of Tetanus Toxoid Encapsulated in PLGA Microspheres

    Science.gov (United States)

    Jiang, Wenlei; Schwendeman, Steven P.

    2014-01-01

    Delivery of vaccine antigens from controlled-release poly(lactic/glycolic acid) (PLGA) microspheres is a novel approach to reduce the number of antigen doses required for protection against infection. A major impediment to developing single-shot vaccines is encapsulated antigen instability during months of exposure to physiological conditions. For example, efforts to control neonatal tetanus in developing countries with a single-dose TT vaccine have been plagued by poor stability of the 150 kDa formaldehyde-detoxified protein antigen, tetanus toxoid (TT) in PLGA microspheres. We examined the denatured states of PLGA-encapsulated TT, revealing two primary TT instability mechanisms: 1) protein aggregation mediated by formaldehyde and 2) acid-induced protein unfolding and epitope damage. Further, we systemically identified excipients which can efficiently inhibit TT aggregation and retain TT antigenicity under simulated deleterious conditions, i.e., elevated temperature and humidity. By employing these novel additives in the PLGA system, we report the slow and continuous release of high doses of TT for one month with retained antigen stability during bioerosion of PLGA. PMID:18710256

  3. Measure Guideline: Buried and/or Encapsulated Ducts

    Energy Technology Data Exchange (ETDEWEB)

    Shapiro, C.; Zoeller, W.; Mantha, P.

    2013-08-01

    Buried and/or encapsulated ducts (BEDs) are a class of advanced, energy-efficiency strategies intended to address the significant ductwork thermal losses associated with ducts installed in unconditioned attics. BEDs are ducts installed in unconditioned attics that are covered in loose-fill insulation and/or encapsulated in closed cell polyurethane spray foam insulation. This Measure Guideline covers the technical aspects of BEDs as well as the advantages, disadvantages, and risks of BEDs compared to other alternative strategies. This guideline also provides detailed guidance on installation of BEDs strategies in new and existing homes through step-by-step installation procedures. This Building America Measure Guideline synthesizes previously published research on BEDs and provides practical information to builders, contractors, homeowners, policy analysts, building professions, and building scientists. Some of the procedures presented here, however, require specialized equipment or expertise. In addition, some alterations to duct systems may require a specialized license. Persons implementing duct system improvements should not go beyond their expertise or qualifications. This guideline provides valuable information for a building industry that has struggled to address ductwork thermal losses in new and existing homes. As building codes strengthen requirements for duct air sealing and insulation, flexibility is needed to address energy efficiency goals. While ductwork in conditioned spaces has been promoted as the panacea for addressing ductwork thermal losses, BEDs installations approach - and sometimes exceed - the performance of ductwork in conditioned spaces.

  4. Chitosan microbeads for encapsulation of thyme (Thymus serpyllum L.) polyphenols.

    Science.gov (United States)

    Trifković, Kata T; Milašinović, Nikola Z; Djordjević, Verica B; Krušić, Melina T Kalagasidis; Knežević-Jugović, Zorica D; Nedović, Viktor A; Bugarski, Branko M

    2014-10-13

    In this work chitosan microbeads were prepared by emulsion technique and loaded with thyme polyphenols by diffusion from an external aqueous solution of Thymus serpyllum L. The effects of concentrations of chitosan (1.5-3% (w/v)) and GA (glutaraldehyde) (0.1-0.4% (v/v)), as a crosslinking agent on the main properties of microbeads were assessed. The obtained microgel beads from ∼ 220 to ∼ 790 μm in diameter were exposed to controlled drying process at air (at 37 °C) after which they contracted to irregular shapes (∼ 70-230 μm). The loading of dried microbeads with polyphenols was achieved by swelling in the acidic medium. The swelling rate of microbeads decreased with the increase in GA concentration. Upon this rehydration, thyme polyphenols were effectively encapsulated (active load of 66-114 mg GAE g(beads)(-1)) and the microbeads recovered a spherical shape. Both, the increase in the amount of the crosslinking agent and the presence of polyphenols, contributed to a more pronounced surface roughness of microbeads. The release of encapsulated polyphenols in simulated gastrointestinal fluids was prolonged to 3h. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. GOLD NANOPARTICLES ENCAPSULATED IN A POLYMERIC MATRIX OF SODIUM ALGINATE

    Directory of Open Access Journals (Sweden)

    Oana Lelia POP

    2016-11-01

    Full Text Available Plasmonic nanoparticles can be used as building blocks for the design of multifunctional systems based on polymeric capsules. The use of functionalised particles in therapeutics and imaging and understanding their effect on the cell functions are among the current challenges in nanobiotechnology and nanomedicine. The aim of the study was to manufacture and characterize polymeric microstructures by encapsulating plasmonic gold nanoparticles in biocompatible matrix of sodium alginate. The gold nanoparticles were obtained by reduction of tetracluoroauric acid with sodium citrate. To characterize the microcapsules, UV-Vis and FTIR spectroscopy, optical and confocal microscopy experiments were performed. In vitro cytotoxicity tests on HFL-1 cells were also performed. The capsules have spherical shape and 120 μm diameter. The presence of encapsulated gold nanoparticles is also shown by confocal microscopy. In vitro tests show that the microcapsules are not cytotoxic upon 24 h of cells exposure to microcapsules concentrations ranging from 2.5 to 25 capsules per cell. The obtained microcapsules of sodium alginate loaded with plasmonic gold nanoparticles could potentially be considered as release systems for biologically relevant molecules.

  6. Dome shaped micro-laser encapsulated in a flexible film

    International Nuclear Information System (INIS)

    Ioppolo, T; Manzo, M

    2014-01-01

    In this paper, we demonstrated multimode laser emission from a dome shaped micro-scale resonator encapsulated in a flexible polymer film. The resonator with a radius of ∼60 microns was made of Norland Blocking Adhesive (NBA 107) doped with a solution of rhodamine 6G and ethanol. The dome was encapsulated in a flexible polymeric film made of polydymethylsiloxane (PDMS) with a thickness of 1 mm. The micro-scale laser was optically pumped using a frequency doubled Q-switch Nd:YAG laser with pulse repetition of 10 Hz and pulse duration of 9 ns. Experiments were carried out to investigate the lasing properties of this laser structure. The pumping threshold for multimode laser emission was below 100 µJ cm −2 . The average optical quality factor for all observed laser modes was of the order of 10 4 . Using a fluence of 315.8 µJ cm −2 it was observed that the intensity of the laser emission dropped by 62% after 5 min of operation. These results showed that these solid state flexible lasers are easy to fabricate and can be integrated into novel flexible photonic devices and novel photonic sensors. (paper)

  7. Filling a niche market: administering drugs by injection or infusion.

    Science.gov (United States)

    Kaldy, Joanne

    2015-05-01

    There is greater incentive than ever to keep individuals requiring injectable or infusion therapy in the nursing facility-and not transfer them to a hospital-to receive those services. There is a demand for pharmacists with the skills, knowledge, and training to provide these services. To make that possible, pharmacies and pharmacists with the proper equipment, supplies, knowledge, training, and expertise are needed to work closely with physicians and nurses to provide sterile, properly compounded products and ensure that drugs are administered appropriately and in the right doses. These pharmacists also can work with facilities and practitioners to assess, improve, and document quality.

  8. Innovative core material produced by infusion process using hemp fibres

    Science.gov (United States)

    Boccarusso, L.; Carrino, L.; Durante, M.; Formisano, A.; Langella, A.; Minutolo, F. Memola Capece

    2016-10-01

    This paper investigates the mechanical properties in term of compression, tensile, flexural and shear strength of a new hemp core based on woven fabric. The hemp core is manufactured by means an innovative vacuum infusion process in which the input both of epoxy resin and of air was allowed. In addition, a comparison among this and others more known materials used as core in sandwich structures was carried out. The results showed that the core under investigation has higher mechanical properties, without shear and indentation failure during the tests on the respective sandwich structures.

  9. Adverse events with continuous doxapram infusion against late postoperative hypoxaemia

    DEFF Research Database (Denmark)

    Rosenberg, J; Kristensen, P A; Pedersen, M H

    1996-01-01

    OBJECTIVE: A randomized double-blind controlled trial of doxapram versus placebo against late postoperative hypoxaemia was planned to include 40 patients (2 x 20). RESULTS: After inclusion of 18 patients a serious adverse event was encountered with development of a brain stem infarction in a 90-y...... promising, further studies on the effect of continuous nocturnal postoperative doxapram infusion on levels of arterial oxygen saturation should be postponed until more knowledge about the pharmacokinetics of doxapram in this particular clinical situation has been gathered....

  10. The Case for Infusing Quantitative Literacy into Introductory Geoscience Courses

    Directory of Open Access Journals (Sweden)

    Jennifer M. Wenner

    2009-01-01

    Full Text Available We present the case for introductory geoscience courses as model venues for increasing the quantitative literacy (QL of large numbers of the college-educated population. The geosciences provide meaningful context for a number of fundamental mathematical concepts that are revisited several times in a single course. Using some best practices from the mathematics education community surrounding problem solving, calculus reform, pre-college mathematics and five geoscience/math workshops, geoscience and mathematics faculty have identified five pedagogical ideas to increase the QL of the students who populate introductory geoscience courses. These five ideas include techniques such as: place mathematical concepts in context, use multiple representations, use technology appropriately, work in groups, and do multiple-day, in-depth problems that place quantitative skills in multiple contexts. We discuss the pedagogical underpinnings of these five ideas and illustrate some ways that the geosciences represent ideal places to use these techniques. However, the inclusion of QL in introductory courses is often met with resistance at all levels. Faculty who wish to include quantitative content must use creative means to break down barriers of public perception of geoscience as qualitative, administrative worry that enrollments will drop and faculty resistance to change. Novel ways to infuse QL into geoscience classrooms include use of web-based resources, shadow courses, setting clear expectations, and promoting quantitative geoscience to the general public. In order to help faculty increase the QL of geoscience students, a community-built faculty-centered web resource (Teaching Quantitative Skills in the Geosciences houses multiple examples that implement the five best practices of QL throughout the geoscience curriculum. We direct faculty to three portions of the web resource: Teaching Quantitative Literacy, QL activities, and the 2006 workshop website

  11. RNA sequencing of trigeminal ganglia in Rattus Norvegicus after glyceryl trinitrate infusion with relevance to migraine

    DEFF Research Database (Denmark)

    Pedersen, Sara Hougaard; Sørensen, Lasse Maretty; Ramachandran, Roshni

    2016-01-01

    INTRODUCTION: Infusion of glyceryl trinitrate (GTN), a donor of nitric oxide, induces immediate headache in humans that in migraineurs is followed by a delayed migraine attack. In order to achieve increased knowledge of mechanisms activated during GTN-infusion this present study aims to investigate...... transcriptional responses to GTN-infusion in the rat trigeminal ganglia. METHODS: Rats were infused with GTN or vehicle and trigeminal ganglia were isolated either 30 or 90 minutes post infusion. RNA sequencing was used to investigate transcriptomic changes in response to the treatment. Furthermore, we developed...... a novel method for Gene Set Analysis Of Variance (GSANOVA) to identify gene sets associated with transcriptional changes across time. RESULTS: 15 genes displayed significant changes in transcription levels in response to GTN-infusion. Ten of these genes showed either sustained up- or down...

  12. Bioavailability and bioactivity of intravenous vs subcutaneous infusion of growth hormone in GH-deficient patients

    DEFF Research Database (Denmark)

    Laursen, Torben; Møller, Jens; Ørskov, Hans

    1996-01-01

    of the present study was to evaluate the short-term metabolic effects of GH following i.v. and s.c. delivery. DESIGN AND MEASUREMENTS: In a cross-over design 10 GH-deficient patients were randomized to receive GH (0.03 microgram (0.1 mU/kg/min) as a continuous i.v. or s.c. infusion for 39 hours on two different...... by RIA following both s.c. (P infusion (P infusion (P infusion [159.5 +/- 21.8 (s.c.), 185.2 +/- 27.7 (i.v.), P = 0.......001), and a higher ratio was obtained following i.v. infusion (P infusion resulted in significantly lower mean levels of serum NEFA (P

  13. Behaviour of homologous 125I fibrinogen after thrombin and ancrod infusion in rabbits

    International Nuclear Information System (INIS)

    Setter, R.

    1977-01-01

    The behaviour of radioactively labelled fibrinogen after infusion of thrombin or ancrod is investigated. Common factors and differences in the behaviour of fibrinogen after infusion of these two enzymes, which act proteolytically on the fibrinogen, are dealt with. Rabbits received an i.v. injection of homologous 125 I-fibrinogen 3 days before ancrod or thrombin infusion. On the day of the experiments, one group of animals received an ancrod infusion (1.5 U/kg body weight for 30 minutes), the other a thrombin infusion (600 U/kg body weight for 60 minutes). Intravenous ancrod and thrombin infusions lowered the fibrinogen level to 30% or 50% of the initial value due to intravascular coagulation. About 50% of the 125 I fibrinogen was transformed after ancrod exposure into a non-coagulating fraction of fibrinogen derivatives which produces no fibrinolytic decomposition products. (orig./AJ) [de

  14. Fatty liver change as a result of hepatic artery infusion chemotherapy.

    Science.gov (United States)

    Zeiss, J; Merrick, H W; Savolaine, E R; Woldenberg, L S; Kim, K; Schlembach, P J

    1990-04-01

    Direct hepatic arterial infusion of floxuridine (FUDR) (Roche Laboratories, Division of Hoffman-LaRoche Inc., Nutley, NJ, U.S.A.) has been used extensively in the treatment of metastases of colorectal tumors to the liver. The effectiveness of infusion and tolerance of the chemotherapy has been improved utilizing a totally implantable infusion pump delivery system. However, unequal distribution of drug infusion may occur to different parts of the liver parenchyma as demonstrated by hepatic arterial infusion scintigraphy (HAPS). We present a case of such unequal perfusion in which fatty metamorphosis of the liver occurred in the overperfused liver segment after FUDR therapy. The liver parenchymal changes were followed by serial computerized tomography scans and proven by biopsy during a minilaparotomy. Serial HAPS examinations show redirection of subsequent infusion to the opposite liver lobe due to parenchymal damage and vascular sclerosis. The importance of uniform liver perfusion and a rare dose-related effect of FUDR on liver parenchyma are thereby demonstrated.

  15. Digital subtraction angiography of inferior gluteal artery through the infusion catheter of chemotherapy for bladder cancer

    International Nuclear Information System (INIS)

    Ishikawa, Satoru; Noguchi, Ryosuke; Kanoh, Shori; Shimazui, Toru; Uchida, Katsunori; Nemoto, Ryosuke; Koiso, Kenkichi

    1987-01-01

    More than fifty patients of invasive bladder cancer had been treated by selective intra-arterial chemotherapy through the inferior or superior gluteal arteries. The distribution of infused drugs had been evaluated by RI-angiography through a thin arterial infusion catheter. This time we performed digital subtraction angiography (DSA) through an infusion catheter in order to know the precise distribution of infused materials in seven patients with locally advanced bladder cancer. Pharmaco-DSA with norepinephrine was also done in four patients. Satisfactory spatial and contrast resolution were gained in four patients and pharmaco-DSA showed better quality. In our experience DSA through intra-arterial infusion catheter was a useful procedure in the evaluation of distribution of infused drugs. (author)

  16. Superselective intra-arterial cisplatin infusion and concomitant radiotherapy for maxillary sinus cancer

    OpenAIRE

    Homma, A; Sakashita, T; Yoshida, D; Onimaru, R; Tsuchiya, K; Suzuki, F; Yasuda, K; Hatakeyama, H; Furusawa, J; Mizumachi, T; Kano, S; Inamura, N; Taki, S; Shirato, H; Fukuda, S

    2013-01-01

    Background: The purpose of this study was to evaluate the efficacy of superselective cisplatin infusion with concomitant radiotherapy (RADPLAT) for previously untreated patients with the squamous cell carcinoma of maxillary sinus (SCC-MS). Methods: Between 1999 and 2010, 54 patients were given superselective intra-arterial infusions of cisplatin (100-120mgm(-2) per week) with simultaneous intra-venous infusions of thiosulfate to neutralise cisplatin toxicity and conventional radiotherapy (65-...

  17. Establishment of donor Chimerism Using Allogeneic Bone Marrow with AMP Cell Co-infusion

    Science.gov (United States)

    2017-09-01

    AWARD NUMBER: W81XWH-15-1-0234 TITLE: Establishment of donor Chimerism Using Allogeneic Bone Marrow with AMP Cell Co-infusion PRINCIPAL...14/2017 4. TITLE AND SUBTITLE Establishment of donor Chimerism Using Allogeneic Bone Marrow with AMP Cell Co-infusion 5a. CONTRACT NUMBER 5b. GRANT...tolerance induction of all types of allografts. In this study, we investigate whether co-infusion of amnion- derived multipotent progenitor ( AMP ) cells

  18. Rapid Infliximab Infusion in Children with Inflammatory Bowel Disease: A Multicenter North American Experience.

    Science.gov (United States)

    El-Matary, Wael; Dykes, Dana M H; Bauman, Laura; Elkadri, Abdul; Carroll, Matthew W; Izaguirre, Marisa R; deBruyn, Jennifer; Samson, Charles M; Crim, Alisa Muniz; Ali, Sabina; Grossman, Andrew

    2017-12-01

    Infliximab (IFX) infusion may lead to development of anti-IFX antibodies, and subsequent infusion reactions (IRs). The safety of rapid IFX infusion administered over 60 minutes has been under-investigated in children with inflammatory bowel disease. In a multicenter study, the frequency and nature of rapid infusion-associated IRs were examined. The medical records of all consecutive children with inflammatory bowel disease receiving rapid IFX infusions between January 2014 and December 2016 were reviewed. Poisson regression analysis was used to identify possible associated factors with IRs. A total of 4120 rapid infusions for 453 children (median age 16 yrs [interquartile range 13.8-17.8], 289 males, 374 with Crohn's disease) were included. One hundred thirty-five participants (29.8%) received rapid IFX infusion for induction and maintenance while the rest received rapid IFX infusion after a median of 5 (interquartile range 4-9) standard infusions. The median dose of IFX using rapid protocol was 8 mg/kg/infusion (interquartile range 6-10). Two hundred sixty-seven (59%) patients received 1 or more premedications and 161 (35.5%) participants received concomitant immunosuppression. Twenty-one participants (4.6%) had IRs with rapid infusions and 2 participants discontinued IFX because of IRs (0.4%). Antihistamine premedications were associated with less frequent IR (adjusted relative risk = 0.30; 95% confidence interval, 0.14-0.64; P = 0.002). In children with inflammatory bowel disease, rapid IFX infusion administered over 60 minutes is safe and well-tolerated. Antihistamine premedications may reduce frequency of IRs (see Video Abstract, Supplemental Digital Content 1, http://links.lww.com/IBD/B632).

  19. Safety of hematopoietic cell infusion in children with malignant and non-malignant diseases.

    Science.gov (United States)

    Heneghan, Chelsea; Smilow, Elana; Tanhehco, Yvette; Jin, Zhezhen; Cofnas, Paige; Schwartz, Sharon; Patel, Nita; Carberry, Deborah; Silverman, Justin; Huynh, Paul; Hagan, Brittany; Tobin, Kim; Bhatia, Monica; George, Diane; Garvin, James; Satwani, Prakash

    2017-11-01

    HPC infusions have been associated with a variety of adverse events related to either patient or HPC product-related factors. Studies documenting infusion-related AEs in children are limited. We reviewed HPC infusion records in 354 children. Infusion-related adverse events were classified as follows: grade 0-absent, grade I-mild, grade II-moderate, grade III-severe, grade IV-life-threatening, and grade V-death. The percentage of patients with grade 0, I, and II-IV AEs was as follows: 0 = 67%, I = 23.4%, and II-V = 9.6% (one patient had fatal anaphylactic reaction to dimethyl sulfoxide). The incidence of grade II-IV hypertension was 7.1%. There was a higher incidence of AEs with infusion of allogeneic bone marrow versus allogeneic PBSCs (47.4% vs 25.3%, P = .001). Cryopreserved products had a lower incidence of infusion-associated AEs compared with fresh HPC products (24% vs 39.4%, P = .003). Allogeneic HPC infusion volume (>100 mL) was a significant risk factor for infusion-associated AEs (P 10 years who received autologous HPC infusions had higher risk of AEs when compared to patients <10 years (P = .01). Our study demonstrated that despite a high incidence of infusion-associated hypertension, HPC infusion is relatively safe in children. Investigating strategies to optimize management of hypertension in the setting of HPC infusion is warranted. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  20. Application of intravenous infusion therapy in veterinary equine practices and clinics

    OpenAIRE

    Kauer, Simone

    2010-01-01

    The study provides an overview of the historical development, the basic principles of modern infusion therapy and indications for the use of intravenous infusion in horses. Furthermore a questionnaire was designed to establish the frequency and application modalities of infusion therapy for horses as well as the complications and risks includ-ing an assessment of practical relevance. The questionnaire was sent to 400 German veterinarians in clinics and specialised or general practices. 220...