WorldWideScience

Sample records for resilient modulus test

  1. Resilient modulus characteristics of soil subgrade with geopolymer additive in peat

    Science.gov (United States)

    Zain, Nasuhi; Hadiwardoyo, Sigit Pranowo; Rahayu, Wiwik

    2017-06-01

    Resilient modulus characteristics of peat soil are generally very low with high potential of deformation and low bearing capacity. The efforts to improve the peat subgrade resilient modulus characteristics is required, one among them is by adding the geopolymer additive. Geopolymer was made as an alternative to replace portland cement binder in the concrete mix in order to promote environmentally friendly, low shrinkage value, low creep value, and fire resistant material. The use of geopolymer to improve the mechanical properties of peat as a road construction subgrade, hence it becomes important to identify the effect of geopolymer addition on the resilient modulus characteristics of peat soil. This study investigated the addition of 0% - 20% geopolymer content on peat soil derived from Ogan Komering Ilir, South Sumatera Province. Resilient modulus measurement was performed by using cyclic triaxial test to determine the resilience modulus model as a function of deviator stresses and radial stresses. The test results showed that an increase in radial stresses did not necessarily lead to an increase in modulus resilient, and on the contrary, an increase in deviator stresses led to a decrease in modulus resilient. The addition of geopolymer in peat soil provided an insignificant effect on the increase of resilient modulus value.

  2. Determination of resilient modulus values for typical plastic soils in Wisconsin.

    Science.gov (United States)

    2011-09-01

    "The objectives of this research are to establish a resilient modulus test results database and to develop : correlations for estimating the resilient modulus of Wisconsin fine-grained soils from basic soil properties. A : laboratory testing program ...

  3. Resilient modulus of black cotton soil

    Directory of Open Access Journals (Sweden)

    K.H. Mamatha

    2017-03-01

    Full Text Available Resilient modulus (MR values of pavement layers are the basic input parameters for the design of pavements with multiple layers in the current mechanistic empirical pavement design guidelines. As the laboratory determination of resilient modulus is costly, time consuming and cumbersome, several empirical models are developed for the prediction of resilient modulus for different regions of the world based on the database of resilient modulus values of local soils. For use of these relationships there is a need to verify the suitability of these models for local conditions. Expansive clay called black cotton soil (BC soil is found in several parts of India and is characterized by low strength and high compressibility. This soil shows swell – shrink behaviour upon wetting and drying and are problematic. The BC soil shows collapse behaviour on soaking and therefore the strength of the soil needs to be improved. Additive stabilization is found to be very effective in stabilizing black cotton soils and generally lime is used to improve the strength and durability of the black cotton soil. In this paper, the results of repeated load tests on black cotton soil samples for the determination of MR under soaked and unsoaked conditions at a relative compaction levels of 100% and 95% of both standard and modified proctor conditions are reported. The results indicate that the black cotton soil fails to meet the density requirement of the subgrade soil and shows collapse behaviour under soaked condition. To overcome this, lime is added as an additive to improve the strength of black cotton soil and repeated load tests were performed as per AASHTO T 307 - 99 for MR determination. The results have shown that the samples are stable under modified proctor condition with MR values ranging from 36 MPa to 388 MPa for a lime content of 2.5% and curing period ranging from 7 to 28 days. Also, it is observed that, the CBR based resilient modulus is not in agreement

  4. Resilient modulus for unbound granular materials and subgrade soils in Egypt

    Directory of Open Access Journals (Sweden)

    Mousa Rabah

    2017-01-01

    Full Text Available Mechanistic Empirical (ME pavement design methods started to gain attention especially the last couple of years in Egypt and the Middle East. One of the challenges facing the spread of these methods in Egypt is lack of advanced properties of local soil and asphalt, which are needed as input data in ME design. Resilient modulus (Mr for example is an important engineering property that expresses the elastic behavior of soil/unbound granular materials (UGMs under cyclic traffic loading for ME design. In order to overcome the scarcity of the resilient modulus data for soil/UGMs in Egypt, a comprehensive laboratory testing program was conducted to measure resilient modulus of typical UGMs and subgrade soils typically used in pavement construction in Egypt. The factors that affect the resilient modulus of soil/UGMs were reviewed, studied and discussed. Finally, the prediction accuracy of the most well-known Mr Prediction models for the locally investigated materials was investigated.

  5. Resilient modulus prediction of soft low-plasticity Piedmont residual soil using dynamic cone penetrometer

    Directory of Open Access Journals (Sweden)

    S. Hamed Mousavi

    2018-04-01

    Full Text Available Dynamic cone penetrometer (DCP has been used for decades to estimate the shear strength and stiffness properties of the subgrade soils. There are several empirical correlations in the literature to predict the resilient modulus values at only a specific stress state from DCP data, corresponding to the predefined thicknesses of pavement layers (a 50 mm asphalt wearing course, a 100 mm asphalt binder course and a 200 mm aggregate base course. In this study, field-measured DCP data were utilized to estimate the resilient modulus of low-plasticity subgrade Piedmont residual soil. Piedmont residual soils are in-place weathered soils from igneous and metamorphic rocks, as opposed to transported or compacted soils. Hence the existing empirical correlations might not be applicable for these soils. An experimental program was conducted incorporating field DCP and laboratory resilient modulus tests on “undisturbed” soil specimens. The DCP tests were carried out at various locations in four test sections to evaluate subgrade stiffness variation laterally and with depth. Laboratory resilient modulus test results were analyzed in the context of the mechanistic-empirical pavement design guide (MEPDG recommended universal constitutive model. A new approach for predicting the resilient modulus from DCP by estimating MEPDG constitutive model coefficients (k1, k2 and k3 was developed through statistical analyses. The new model is capable of not only taking into account the in situ soil condition on the basis of field measurements, but also representing the resilient modulus at any stress state which addresses a limitation with existing empirical DCP models and its applicability for a specific case. Validation of the model is demonstrated by using data that were not used for model development, as well as data reported in the literature. Keywords: Dynamic cone penetrometer (DCP, Resilient modulus, Mechanistic-empirical pavement design guide (MEPDG, Residual

  6. Resilient Modulus Characterization of Alaskan Granular Base Materials

    Science.gov (United States)

    2010-08-01

    Resilient modulus (MR) of base course material is an important material input for : pavement design. In Alaska, due to distinctiveness of local climate, material source, : fines content and groundwater level, resilient properties of D-1 granular base...

  7. Design values of resilient modulus of stabilized and non-stabilized base.

    Science.gov (United States)

    2010-10-01

    The primary objective of this research study is to determine design value ranges for typical base materials, as allowed by LADOTD specifications, through laboratory tests with respect to resilient modulus and other parameters used by pavement design ...

  8. Effect of Treated Coconut Shell and Fiber on the Resilient Modulus of Double-layer Porous Asphalt at Different Aging

    Science.gov (United States)

    Ting, T. L.; Ramadhansyah, P. J.; Norhidayah, A. H.; Yaacob, H.; Hainin, M. R.; Ibrahim, M. H. Wan; Jayanti, D. S.; Abdullahi, A. M.

    2018-04-01

    Coconut shell (CS) and coconut fiber (CF) are new waste products that have been of growing interest recently in the highway asphalt pavement industry. This study investigated the effect of CS and CF on the resilient modulus of double-layer porous asphalt (DLPA). CS aggregate 5 mm in size was substituted for the DLPA at 5%, 10%, and 15% by weight, while CF was added to the asphalt at 0.3% and 0.5% by weight. Before mixing with other aggregates, the CS and CF were treated with 5%wt Sodium hydroxide (NaOH) to reduce their water absorption ability. The samples were prepared via the Marshall method. The result shows that DLPA with 10% CS aggregate has better resilient modulus under 25 °C for unaged and aged samples compared with the other substitution percentages. However, the sample with CF has a lower resilient modulus because the amount of CF has increased. In general, the substitution of 10% CS provided better resilient modulus among the other percentages.

  9. An Evaluation of the Resilient Modulus and Permanent Deformation of Unbound Mixtures of Granular Materials and Rubber Particles from Scrap Tyres to Be Used in Subballast Layers

    Energy Technology Data Exchange (ETDEWEB)

    Hidalgo Sgnes, C.

    2016-07-01

    Over the last years rubber from scrap tyres has been reused in different civil works such as road embankments and railway platforms due to its resilient properties, low degradation and vibration attenuation. Unfortunately, this issue is still scarce. For instance, in Spain about 175.000 tonnes of scrap tyres were collected in 2014, of which only 0.6% were reused in civil works. Aiming to contribute to the reutilisation of large quantities of this waste material, this paper focuses on the analysis of unbound mixtures of granular materials with different percentages of rubber particles to be used as subballast layers. Mixtures are tested under cyclic triaxial tests so as to obtain their resilient modulus and evaluate their permanent deformations. It is found that as the rubber content increases, the resilient modulus decreases and the permanent deformation increases. Taking into account the usual loads transmitted to the subballast layer, the optimum rubber content that does not compromise the behaviour of the mixture is set in a range between 2.5% and 5% in terms of weight. (Author)

  10. The Development of Mathematical Prediction Model to Predict Resilient Modulus for Natural Soil Stabilized by Pofa-Opc Additive for the Use in Unpaved Road Design

    Science.gov (United States)

    Gamil, Y. M. R.; Bakar, I. H.

    2016-07-01

    Resilient Modulus (Mr) is considered one of the most important parameters in the design of road structure. This paper describes the development of the mathematical model to predict resilient modulus of organic soil stabilized by the mix of Palm Oil Fuel Ash - Ordinary Portland Cement (POFA-OPC) soil stabilization additives. It aims to optimize the use of the use of POFA in soil stabilization. The optimization models enable to eliminate the arbitrary selection and its associated disadvantages in determination of the optimum additive proportion. The model was developed based on Scheffe regression theory. The mix proportions of the samples in the experiment were adopted from similar studies reported in the literature Twenty five samples were designed, prepared and then characterized for each mix proportion based on the MR in 28 days curing. The results are used to develop the mathematical prediction model. The model was statistically analyzed and verified for its adequacy and validity using F-test.

  11. Standardizing lightweight deflectometer modulus measurements for compaction quality assurance : research summary.

    Science.gov (United States)

    2017-09-01

    The mechanistic-empirical pavement design method requires the elastic resilient modulus as the key input for characterization of geomaterials. Current density-based QA procedures do not measure resilient modulus. Additionally, the density-based metho...

  12. Módulo de resiliência de um solo arenoso e de suas misturas com alcatrão fracionado e cal Resilient modulus of a sandy soil and its mixtures with fractioned tar and lime

    Directory of Open Access Journals (Sweden)

    Giovani Levi Sant'Anna

    2003-08-01

    Full Text Available O conhecimento do módulo de resiliência dos solos de subleito e dos materiais que compõem as camadas de pavimentos rodoviários é obrigatório para uma análise eficiente de seu comportamento estrutural como um todo. Devido à importância dos materiais granulares como constituintes de camadas de pavimentos rodoviários flexíveis, tem-se evidenciado maior interesse em abordar a sua resposta resiliente e de misturas estabilizadas quimicamente obtidas a partir destes, procurando conhecer o seu comportamento mecânico, sob a ação de cargas repetidas, quando constituintes do pavimento de estradas florestais. Buscou-se, com a realização deste trabalho, identificar o módulo de resiliência de um solo arenoso comum na região de Viçosa-MG, em seu estado natural e quando estabilizado com cal e alcatrão, e propor correlações empíricas entre este e outros parâmetros geotécnicos de fácil obtenção em laboratório.Understanding the resilient modulus (M R of the sub-grade soils and materials composing the layers of road pavements is crucial for an efficient analysis of their structural behavior as a whole. Due to the importance of the granular materials as layers of flexible road pavements, it has been a practice to determine their resilient response and that of their chemically stabilized mixtures in order to understand their mechanical behavior under repeated loads when used as layers of forest road pavement. This work was conducted to identify the geotechnical and resilient properties of a sandy soil in the county of Viçosa-MG, in its natural state and after stabilization with lime and tar and to propose empirical correlations between the resilient modulus of these materials and geotechnical parameters easily determined from laboratory testing data.

  13. Determination of elastic modulus of ceramics using ultrasonic testing

    Science.gov (United States)

    Sasmita, Firmansyah; Wibisono, Gatot; Judawisastra, Hermawan; Priambodo, Toni Agung

    2018-04-01

    Elastic modulus is important material property on structural ceramics application. However, bending test as a common method for determining this property require particular specimen preparation. Furthermore, elastic modulus of ceramics could vary because it depends on porosity content. For structural ceramics industry, such as ceramic tiles, this property is very important. This drives the development of new method to improve effectivity or verification method as well. In this research, ultrasonic testing was conducted to determine elastic modulus of soda lime glass and ceramic tiles. The experiment parameter was frequency of probe (1, 2, 4 MHz). Characterization of density and porosity were also done for analysis. Results from ultrasonic testing were compared with elastic modulus resulted from bending test. Elastic modulus of soda-lime glass based on ultrasonic testing showed excellent result with error 2.69% for 2 MHz probe relative to bending test result. Testing on red and white ceramic tiles were still contained error up to 41% and 158%, respectively. The results for red ceramic tile showed trend that 1 MHz probe gave better accuracy in determining elastic modulus. However, testing on white ceramic tile showed different trend. It was due to the presence of porosity and near field effect.

  14. Asphalt mix characterization using dynamic modulus and APA testing.

    Science.gov (United States)

    2005-11-01

    final report summarizes two research efforts related to asphalt mix characterization: dynamic modulus and Asphalt Pavement Analyzer testing. One phase of the research consisted of a laboratory-based evaluation of dynamic modulus of Oregon dense-grade...

  15. Influence of the Testing Gage Length on the Strength, Young's Modulus and Weibull Modulus of Carbon Fibres and Glass Fibres

    Directory of Open Access Journals (Sweden)

    Luiz Claudio Pardini

    2002-10-01

    Full Text Available Carbon fibres and glass fibres are reinforcements for advanced composites and the fiber strength is the most influential factor on the strength of the composites. They are essentially brittle and fail with very little reduction in cross section. Composites made with these fibres are characterized by a high strength/density ratio and their properties are intrisically related to their microstructure, i.e., amount and orientation of the fibres, surface treatment, among other factors. Processing parameters have an important role in the fibre mechanical behaviour (strength and modulus. Cracks, voids and impurities in the case of glass fibres and fibrillar misalignments in the case of carbon fibres are created during processing. Such inhomogeneities give rise to an appreciable scatter in properties. The most used statistical tool that deals with this characteristic variability in properties is the Weibull distribution. The present work investigates the influence of the testing gage length on the strength, Young's modulus and Weibull modulus of carbon fibres and glass fibres. The Young's modulus is calculated by two methods: (i ASTM D 3379M, and (ii interaction between testing equipment/specimen The first method resulted in a Young modulus of 183 GPa for carbon fibre, and 76 GPa for glass fibre. The second method gave a Young modulus of 250 GPa for carbon fibre and 50 GPa for glass fibre. These differences revelead differences on how the interaction specimen/testing machine can interfere in the Young modulus calculations. Weibull modulus can be a tool to evaluate the fibre's homogeneity in terms of properties and it is a good quality control parameter during processing. In the range of specimen gage length tested the Weibull modulus for carbon fibre is ~ 3.30 and for glass fibres is ~ 5.65, which indicates that for the batch of fibres tested, the glass fibre is more uniform in properties.

  16. Effect of moisture content and dry unit weight on the resilient modulus of subgrade soils predicted by cone penetration test.

    Science.gov (United States)

    2002-06-01

    The objective of this study was to investigate the effect of moisture content and dry unit weight on the resilient characteristics of subgrade soil predicted by the cone penetration test. An experimental program was conducted in which cone penetratio...

  17. Influence of freeze-thaw cycling on the resilient modulues of PFBC materials

    Energy Technology Data Exchange (ETDEWEB)

    Wolfe, W.E.; Butalia, T.S.; Meek, B.L. [Ohio State University, Columbus, OH (United States). Dept. of Civil and Environmental Engineering and Geodetic Science

    1999-01-01

    The dynamic stress-strain characteristics of a Pressurized Fluidized Bed Combustion (PFBC) material, before and after freeze and thaw cycling, were studied to evaluate its suitability as a substitute for conventional road construction materials in the design of flexible pavement systems. Samples compacted in the laboratory at two different moisture contents (optimum and 8% above optimum) were cyclically load tested after being allowed to cure for various duration. The results of the cyclic tests are presented in terms of the Resilient Modulus, which is a measure of the elastic property of the soil supporting the roadway. The modulus of the samples compacted near the optimum moisture content compared satisfactorily with data available for conventional materials. Samples compacted at moisture contents higher than the optimum exhibited a significant reduction in a resilient modulus values after freeze-thaw cycling. This comparing indicates that properly compacted PFBC holds good promise as a subgrade material in the construction of low traffic volume roads. 13 refs., 5 figs., 1 tab.

  18. Deflection of resilient materials for reduction of floor impact sound.

    Science.gov (United States)

    Lee, Jung-Yoon; Kim, Jong-Mun

    2014-01-01

    Recently, many residents living in apartment buildings in Korea have been bothered by noise coming from the houses above. In order to reduce noise pollution, communities are increasingly imposing bylaws, including the limitation of floor impact sound, minimum thickness of floors, and floor soundproofing solutions. This research effort focused specifically on the deflection of resilient materials in the floor sound insulation systems of apartment houses. The experimental program involved conducting twenty-seven material tests and ten sound insulation floating concrete floor specimens. Two main parameters were considered in the experimental investigation: the seven types of resilient materials and the location of the loading point. The structural behavior of sound insulation floor floating was predicted using the Winkler method. The experimental and analytical results indicated that the cracking strength of the floating concrete floor significantly increased with increasing the tangent modulus of resilient material. The deflection of the floating concrete floor loaded at the side of the specimen was much greater than that of the floating concrete floor loaded at the center of the specimen. The Winkler model considering the effect of modulus of resilient materials was able to accurately predict the cracking strength of the floating concrete floor.

  19. Use of the laboratory tests of soil modulus in modelling pile behaviour

    Science.gov (United States)

    Dyka, Ireneusz

    2012-10-01

    This article deals with the question of theoretical description of behaviour of a single pile rested in a layered soil medium. Particular attention is paid to soil modulus which is used in calculation method for pile load-settlement curve. A brief analysis of the results obtained by laboratory tests to assess soil modulus and its nonlinear variability has been presented. The results of tests have been used in triaxial apparatus and resonant column/torsional shear device. There have also been presented the results of load-settlement calculation for a single pile under axial load with implementation of different models of soil modulus degradation. On this basis, possibilities of using particular kinds of laboratory tests in calculation procedure of foundation settlement have been presented as well as further developments of them.

  20. Developing the elastic modulus measurement of asphalt concrete using the compressive strength test

    Science.gov (United States)

    Setiawan, Arief; Suparma, Latif Budi; Mulyono, Agus Taufik

    2017-11-01

    Elastic modulus is a fundamental property of an asphalt mixture. An analytical method of the elastic modulus is needed to determine the thickness of flexible pavement. It has a role as one of the input values on a stress-strain analysis in the finite element method. The aim of this study was to develop the measurement of the elastic modulus by using compressive strength testing. This research used a set of specimen mold tool and Delta Dimensi software to record strain changes occurring in the proving ring of compression machine and the specimens. The elastic modulus of the five types of aggregate gradation and 2 types of asphalt were measured at optimum asphalt content. Asphalt Cement 60/70 and Elastomer Modified Asphalt (EMA) were used as a binder. Manufacturing success indicators of the specimens used void-in-the-mix (VIM) 3-5 % criteria. The success rate of the specimen manufacturing was more than 76%. Thus, the procedure and the compressive strength test equipment could be used for the measurement of the elastic modulus. The aggregate gradation and asphalt types significantly affected the elastic modulus of the asphalt concrete.

  1. Size dependent elastic modulus and mechanical resilience of dental enamel.

    Science.gov (United States)

    O'Brien, Simona; Shaw, Jeremy; Zhao, Xiaoli; Abbott, Paul V; Munroe, Paul; Xu, Jiang; Habibi, Daryoush; Xie, Zonghan

    2014-03-21

    Human tooth enamel exhibits a unique microstructure able to sustain repeated mechanical loading during dental function. Although notable advances have been made towards understanding the mechanical characteristics of enamel, challenges remain in the testing and interpretation of its mechanical properties. For example, enamel was often tested under dry conditions, significantly different from its native environment. In addition, constant load, rather than indentation depth, has been used when mapping the mechanical properties of enamel. In this work, tooth specimens are prepared under hydrated conditions and their stiffnesses are measured by depth control across the thickness of enamel. Crystal arrangement is postulated, among other factors, to be responsible for the size dependent indentation modulus of enamel. Supported by a simple structure model, effective crystal orientation angle is calculated and found to facilitate shear sliding in enamel under mechanical contact. In doing so, the stress build-up is eased and structural integrity is maintained. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. Characterizing resilient behavior of naturally occurring bituminous sands for road construction

    CSIR Research Space (South Africa)

    Anochie-Boateng, Joseph

    2010-11-01

    Full Text Available large capacity haul trucks and shovels. This paper focuses on determining in laboratory the resilient behavior of three oil sand materials with bitumen contents of 8.5, 13.3, and 14.5% by weight. The resilient modulus MR properties were obtained using a...

  3. Fatigue testing of wood composites for aerogenerator blades. Pt. 11: Assessment of fatigue damage accumulation using a fatigue modulus approach

    Energy Technology Data Exchange (ETDEWEB)

    Hacker, C L; Ansell, M P [Bath Univ. (United Kingdom)

    1996-12-31

    Stress-strain hysteresis loops have been captured during fatigue tests performed at R=10 (compression-compression) and R=0.1 (tension-tension) on Khaya epoxy wood composites. A fatigue modulus approach, proposed by Hwang and Han in 1989, has been applied to the data and a relationship established between the initial change in fatigue modulus and fatigue life. By following changes in fatigue modulus during the first 100 test cycles it is possible to predict the life of the sample allowing rapid evaluation of the fatigue performance of wood composites. Fatigue modulus values have also been calculated for hysteresis loops captured during complex load - time history tests. Similar trends in change in fatigue modulus suggest that this approach could be used in complex loading conditions to evaluate fatigue damage accumulation and predict fatigue life. (Author)

  4. A note on the applied tearing modulus (Tsub(J)sup(app)) in ductile instability testing and analysis

    International Nuclear Information System (INIS)

    Saka, Masumi; Takahashi, Hideaki; Abe, Hiroyuki; Ando, Kotoji.

    1984-01-01

    In the evaluation of the soundness of the structures made of high toughness materials, it is a very important problem to clarify by what dynamic condition the transition from the stable propagation of ductile cracks to ductile unstable breaking is controlled. As a criterion for ductile unstable breaking, Paris et al. proposed that an applied tearing modulus is not smaller than a material tearing modulus, based on J-integral. In order to make highly reliable forecast on the starting point of ductile unstable breaking, it is necessary to sufficiently examine the features of an applied tearing modulus. In this study, referring to the test results of the ductile unstable breaking of ITCT test pieces of A508 steel for reactor pressure vessels, the features of the changing tendency of an applied tearing modulus accompanying crack development and the cause of these features were examined in detail. Moreover, the errors in the theoretical forecast of J-integral and the amount of crack development at the start of ductile unstable breaking in relation to the above features were examined. The test pieces and the experimental method, the method of analysis, the experimental results, the features of an applied tearing modulus and the accuracy of forecast are reported. (Kako, I.)

  5. Investigation of test methods for measuring compressive strength and modulus of two-dimensional carbon-carbon composites

    Science.gov (United States)

    Ohlhorst, Craig W.; Sawyer, James Wayne; Yamaki, Y. Robert

    1989-01-01

    An experimental evaluation has been conducted to ascertain the the usefulness of two techniques for measuring in-plane compressive failure strength and modulus in coated and uncoated carbon-carbon composites. The techniques involved testing specimens with potted ends as well as testing them in a novel clamping fixture; specimen shape, length, gage width, and thickness were the test parameters investigated for both coated and uncoated 0/90 deg and +/-45 deg laminates. It is found that specimen shape does not have a significant effect on the measured compressive properties. The potting of specimen ends results in slightly higher measured compressive strengths than those obtained with the new clamping fixture. Comparable modulus values are obtained by both techniques.

  6. The study of stiffness modulus values for AC-WC pavement

    Science.gov (United States)

    Lubis, AS; Muis, Z. A.; Iskandar, T. D.

    2018-02-01

    One of the parameters of the asphalt mixture in order for the strength and durability to be achieved as required is the stress-and-strain showing the stiffness of a material. Stiffness modulus is a very necessary factor that will affect the performance of asphalt pavements. If the stiffness modulus value decreases there will be a cause of aging asphalt pavement crack easily when receiving a heavy load. The high stiffness modulus asphalt concrete causes more stiff and resistant to bending. The stiffness modulus value of an asphalt mixture material can be obtained from the theoretical (indirect methods) and laboratory test results (direct methods). For the indirect methods used Brown & Brunton method, and Shell Bitumen method; while for the direct methods used the UMATTA tool. This study aims to determine stiffness modulus values for AC-WC pavement. The tests were conducted in laboratory that used 3 methods, i.e. Brown & Brunton Method, Shell Bitumen Method and Marshall Test as a substitute tool for the UMATTA tool. Hotmix asphalt made from type AC-WC with pen 60/70 using a mixture of optimum bitumen content was 5.84% with a standard temperature variation was 60°C and several variations of temperature that were 30, 40, 50, 70 and 80°C. The stiffness modulus value results obtained from Brown & Brunton Method, Shell Bitumen Method and Marshall Test which were 1374,93 Mpa, 235,45 Mpa dan 254,96 Mpa. The stiffness modulus value decreases with increasing temperature of the concrete asphalt. The stiffness modulus value from the Bitumen Shell method and the Marshall Test has a relatively similar value.The stiffness modulus value from the Brown & Brunton method is greater than the Bitumen Shell method and the Marshall Test, but can not measure the stiffness modulus value at temperature above 80°C.

  7. Tube suction test for evaluating durability of cementitiously stabilized soils.

    Science.gov (United States)

    2011-06-01

    In a comprehensive laboratory study, different tests namely, unconfined compressive strength (UCS) at the end of freeze-thaw/wet-dry (F-T/W-D) cycles, resilient modulus (Mr) at the end of F-T/W-D cycles, vacuum saturation, tube suction, and moisture ...

  8. Tube suction test for evaluating durability of cementitiously stabilized soils.

    Science.gov (United States)

    2011-06-01

    In a comprehensive laboratory study, different tests namely, unconfined compressive strength (UCS) at the end of freeze-thaw/wet-dry (FT/ : W-D) cycles, resilient modulus (Mr) at the end of F-T/W-D cycles, vacuum saturation, tube suction, and moistur...

  9. Mechanical Components from Highly Recoverable, Low Apparent Modulus Materials

    Science.gov (United States)

    Padula, Santo, II (Inventor); Noebe, Ronald D. (Inventor); Stanford, Malcolm K. (Inventor); DellaCorte, Christopher (Inventor)

    2015-01-01

    A material for use as a mechanical component is formed of a superelastic intermetallic material having a low apparent modulus and a high hardness. The superelastic intermetallic material is conditioned to be dimensionally stable, devoid of any shape memory effect and have a stable superelastic response without irrecoverable deformation while exhibiting strains of at least 3%. The method of conditioning the superelastic intermetallic material is described. Another embodiment relates to lightweight materials known as ordered intermetallics that perform well in sliding wear applications using conventional liquid lubricants and are therefore suitable for resilient, high performance mechanical components such as gears and bearings.

  10. Elastic Composite, Reinforced Lightweight Concrete as a Type of Resilient Composite Systems

    OpenAIRE

    Esmaeili, Kamyar

    2015-01-01

    . A kind of "Elastic Composite, Reinforced Lightweight Concrete (ECRLC)" with the mentioned specifics is a type of "Resilient Composite Systems (RCS)" in which, contrary to the basic geometrical assumption of flexure theory in Solid Mechanics, "the strain changes in the beam height during bending" is typically "Non-linear". . Through employing this integrated structure, with significant high strain capability and modulus of resilience in bending, we could constructively achieve high bearing c...

  11. Hopefulness predicts resilience after hereditary colorectal cancer genetic testing: a prospective outcome trajectories study.

    Science.gov (United States)

    Ho, Samuel M Y; Ho, Judy W C; Bonanno, George A; Chu, Annie T W; Chan, Emily M S

    2010-06-11

    Genetic testing for hereditary colorectal cancer (HCRC) had significant psychological consequences for test recipients. This prospective longitudinal study investigated the factors that predict psychological resilience in adults undergoing genetic testing for HCRC. A longitudinal study was carried out from April 2003 to August 2006 on Hong Kong Chinese HCRC family members who were recruited and offered genetic testing by the Hereditary Gastrointestinal Cancer Registry to determine psychological outcomes after genetic testing. Self-completed questionnaires were administered immediately before (pre-disclosure baseline) and 2 weeks, 4 months and 1 year after result disclosure. Using validated psychological inventories, the cognitive style of hope was measured at baseline, and the psychological distress of depression and anxiety was measured at all time points. Of the 76 participating subjects, 71 individuals (43 men and 28 women; mean age 38.9 +/- 9.2 years) from nine FAP and 24 HNPCC families completed the study, including 39 mutated gene carriers. Four patterns of outcome trajectories were created using established norms for the specified outcome measures of depression and anxiety. These included chronic dysfunction (13% and 8.7%), recovery (0% and 4.3%), delayed dysfunction (13% and 15.9%) and resilience (76.8% and 66.7%). Two logistic regression analyses were conducted using hope at baseline to predict resilience, with depression and anxiety employed as outcome indicators. Because of the small number of participants, the chronic dysfunction and delayed dysfunction groups were combined into a non-resilient group for comparison with the resilient group in all subsequent analysis. Because of low frequencies, participants exhibiting a recovery trajectory (n = 3 for anxiety and n = 0 for depression) were excluded from further analysis. Both regression equations were significant. Baseline hope was a significant predictor of a resilience outcome trajectory for depression

  12. Stiffness, resilience, compressibility

    Energy Technology Data Exchange (ETDEWEB)

    Leu, Bogdan M. [Argonne National Laboratory, Advanced Photon Source (United States); Sage, J. Timothy, E-mail: jtsage@neu.edu [Northeastern University, Department of Physics and Center for Interdisciplinary Research on Complex Systems (United States)

    2016-12-15

    The flexibility of a protein is an important component of its functionality. We use nuclear resonance vibrational spectroscopy (NRVS) to quantify the flexibility of the heme iron environment in the electron-carrying protein cytochrome c by measuring the stiffness and the resilience. These quantities are sensitive to structural differences between the active sites of different proteins, as illustrated by a comparative analysis with myoglobin. The elasticity of the entire protein, on the other hand, can be probed quantitatively from NRVS and high energy-resolution inelastic X-ray scattering (IXS) measurements, an approach that we used to extract the bulk modulus of cytochrome c.

  13. Laboratory Performance Evaluation of High Modulus Asphalt Concrete Modified with Different Additives

    Directory of Open Access Journals (Sweden)

    Peng Li

    2017-01-01

    Full Text Available The objective of this study is to evaluate comprehensive performance of high modulus asphalt concrete (HMAC and propose common values for establishing evaluation system. Three gradations with different modifiers were conducted to study the high and low temperature performance, shearing behavior, and water stability. The laboratory tests for HMAC included static and dynamic modulus tests, rutting test, uniaxial penetration test, bending test, and immersion Marshall test. Dynamic modulus test results showed that modifier can improve the static modulus and the improvements were remarkable at higher temperature. Moreover, modulus of HMAC-20 was better than those of HMAC-16 and HMAC-25. The results of performance test indicated that HMAC has good performance to resist high temperature rutting, and the resistances of the HMAC-20 and HMAC-25 against rutting were better than that of HMAC-16. Then, the common values of dynamic stability were recommended. Furthermore, common values of HMAC performance were established based on pavement performance tests.

  14. Hopefulness predicts resilience after hereditary colorectal cancer genetic testing: a prospective outcome trajectories study

    Directory of Open Access Journals (Sweden)

    Chu Annie TW

    2010-06-01

    Full Text Available Abstract Background - Genetic testing for hereditary colorectal cancer (HCRC had significant psychological consequences for test recipients. This prospective longitudinal study investigated the factors that predict psychological resilience in adults undergoing genetic testing for HCRC. Methods - A longitudinal study was carried out from April 2003 to August 2006 on Hong Kong Chinese HCRC family members who were recruited and offered genetic testing by the Hereditary Gastrointestinal Cancer Registry to determine psychological outcomes after genetic testing. Self-completed questionnaires were administered immediately before (pre-disclosure baseline and 2 weeks, 4 months and 1 year after result disclosure. Using validated psychological inventories, the cognitive style of hope was measured at baseline, and the psychological distress of depression and anxiety was measured at all time points. Results - Of the 76 participating subjects, 71 individuals (43 men and 28 women; mean age 38.9 ± 9.2 years from nine FAP and 24 HNPCC families completed the study, including 39 mutated gene carriers. Four patterns of outcome trajectories were created using established norms for the specified outcome measures of depression and anxiety. These included chronic dysfunction (13% and 8.7%, recovery (0% and 4.3%, delayed dysfunction (13% and 15.9% and resilience (76.8% and 66.7%. Two logistic regression analyses were conducted using hope at baseline to predict resilience, with depression and anxiety employed as outcome indicators. Because of the small number of participants, the chronic dysfunction and delayed dysfunction groups were combined into a non-resilient group for comparison with the resilient group in all subsequent analysis. Because of low frequencies, participants exhibiting a recovery trajectory (n = 3 for anxiety and n = 0 for depression were excluded from further analysis. Both regression equations were significant. Baseline hope was a significant

  15. Perceived stress and resilience in Alzheimer's disease caregivers: testing moderation and mediation models of social support.

    Science.gov (United States)

    Wilks, Scott E; Croom, Beth

    2008-05-01

    The study examined whether social support functioned as a protective, resilience factor among Alzheimer's disease (AD) caregivers. Moderation and mediation models were used to test social support amid stress and resilience. A cross-sectional analysis of self-reported data was conducted. Measures of demographics, perceived stress, family support, friend support, overall social support, and resilience were administered to caregiver attendees (N=229) of two AD caregiver conferences. Hierarchical regression analysis showed the compounded impact of predictors on resilience. Odds ratios generated probability of high resilience given high stress and social supports. Social support moderation and mediation were tested via distinct series of regression equations. Path analyses illustrated effects on the models for significant moderation and/or mediation. Stress negatively influenced and accounted for most variation in resilience. Social support positively influenced resilience, and caregivers with high family support had the highest probability of elevated resilience. Moderation was observed among all support factors. No social support fulfilled the complete mediation criteria. Evidence of social support as a protective, moderating factor yields implications for health care practitioners who deliver services to assist AD caregivers, particularly the promotion of identification and utilization of supportive familial and peer relations.

  16. Use of coal fly ash and other waste products in soil stabilization and road construction-including non-destructive testing of roadways.

    Science.gov (United States)

    2012-02-01

    An extensive laboratory testing program was performed on subgrade soils stabilized using fly ash and lime kiln dust. The laboratory : program included measurements of: compaction curves, small strain elastic moduli, resilient modulus (Mr), Briaud Com...

  17. Use of coal fly ash and other waste products in soil stabilization and road construction including non-destructive testing of roadways.

    Science.gov (United States)

    2012-06-01

    An extensive laboratory testing program was performed on subgrade soils stabilized using fly ash and : lime kiln dust. The laboratory program included measurements of: compaction curves, small strain elastic moduli, : resilient modulus (Mr), Briaud C...

  18. Mechanical Researches on Young's Modulus of SCS Nanostructures

    Directory of Open Access Journals (Sweden)

    Qinhua Jin

    2009-01-01

    Full Text Available Nanostructures of SingleCrystalSilicon (SCS with superior electrical, mechanical, thermal, and optical properties are emerging in the development of novel nanodevices. Mechanical properties especially Young's modulus are essential in developing and utilizing such nanodevices. In this paper, experimental researches including bending tests, resonance tests, and tensile tests on Young' s modulus of nanoscaled SCS are reviewed, and their results are compared. It was found that the values of E measured by different testing methods cannot match to each other. As the differences cannot be explained as experimental errors, it should be understood by taking surface effect into account. With a simplified model, we qualitatively explained the difference in E value measured by tensile test and by resonance test for Si nanobeams.

  19. Bikini Atoll coral biodiversity resilience five decades after nuclear testing

    International Nuclear Information System (INIS)

    Richards, Zoe T.; Beger, Maria; Pinca, Silvia; Wallace, Carden C.

    2008-01-01

    Five decades after a series of nuclear tests began, we provide evidence that 70% of the Bikini Atoll zooxanthellate coral assemblage is resilient to large-scale anthropogenic disturbance. Species composition in 2002 was assessed and compared to that seen prior to nuclear testing. A total of 183 scleractinian coral species was recorded, compared to 126 species recorded in the previous study (excluding synonomies, 148 including synonomies). We found that 42 coral species may be locally extinct at Bikini. Fourteen of these losses may be pseudo-losses due to inconsistent taxonomy between the two studies or insufficient sampling in the second study, however 28 species appear to represent genuine losses. Of these losses, 16 species are obligate lagoonal specialists and 12 have wider habitat compatibility. Twelve species are recorded from Bikini for the first time. We suggest the highly diverse Rongelap Atoll to the east of Bikini may have contributed larval propagules to facilitate the partial resilience of coral biodiversity in the absence of additional anthropogenic threats

  20. Bikini Atoll coral biodiversity resilience five decades after nuclear testing

    Energy Technology Data Exchange (ETDEWEB)

    Richards, Zoe T. [Museum of Tropical Queensland, Flinders St, Townsville, QLD 4810 (Australia) and Australian Research Council Centre of Excellence for Coral Reef Studies, James Cook University, Townsville, QLD 4811 (Australia) and School of Marine and Tropical Biology, James Cook University, Townsville QLD 4811 (Australia); NRAS - Marshall Islands: Natural Resource Assessment Surveys (Australia)], E-mail: zoe.richards@jcu.edu.au; Beger, Maria [Ecology Centre and Commonwealth Research Facility for Applied Environmental Decision Analysis, University of Queensland, St Lucia, QLD 4072 (Australia); NRAS - Marshall Islands: Natural Resource Assessment Surveys (Australia); Pinca, Silvia [College of the Marshall Islands, Majuro, Marshall Islands, NRAS - Marshall Islands: Natural Resource Assessment Surveys (Australia); Wallace, Carden C. [Museum of Tropical Queensland, Flinders St, Townsville, QLD 4810 (Australia)

    2008-03-15

    Five decades after a series of nuclear tests began, we provide evidence that 70% of the Bikini Atoll zooxanthellate coral assemblage is resilient to large-scale anthropogenic disturbance. Species composition in 2002 was assessed and compared to that seen prior to nuclear testing. A total of 183 scleractinian coral species was recorded, compared to 126 species recorded in the previous study (excluding synonomies, 148 including synonomies). We found that 42 coral species may be locally extinct at Bikini. Fourteen of these losses may be pseudo-losses due to inconsistent taxonomy between the two studies or insufficient sampling in the second study, however 28 species appear to represent genuine losses. Of these losses, 16 species are obligate lagoonal specialists and 12 have wider habitat compatibility. Twelve species are recorded from Bikini for the first time. We suggest the highly diverse Rongelap Atoll to the east of Bikini may have contributed larval propagules to facilitate the partial resilience of coral biodiversity in the absence of additional anthropogenic threats.

  1. A small punch test technique for characterizing the elastic modulus and fracture behavior of PMMA bone cement used in total joint replacement.

    Science.gov (United States)

    Giddings, V L; Kurtz, S M; Jewett, C W; Foulds, J R; Edidin, A A

    2001-07-01

    Polymethylmethacrylate (PMMA) bone cement is used in total joint replacements to anchor implants to the underlying bone. Establishing and maintaining the integrity of bone cement is thus of critical importance to the long-term outcome of joint replacement surgery. The goal of the present study was to evaluate the suitability of a novel testing technique, the small punch or miniaturized disk bend test, to characterize the elastic modulus and fracture behavior of PMMA. We investigated the hypothesis that the crack initiation behavior of PMMA during the small punch test was sensitive to the test temperature. Miniature disk-shaped specimens, 0.5 mm thick and 6.4 mm in diameter, were prepared from PMMA and Simplex-P bone cement according to manufacturers' instructions. Testing was conducted at ambient and body temperatures, and the effect of test temperature on the elastic modulus and fracture behavior was statistically evaluated using analysis of variance. For both PMMA materials, the test temperature had a significant effect on elastic modulus and crack initiation behavior. At body temperature, the specimens exhibited "ductile" crack initiation, whereas at room temperature "brittle" crack initiation was observed. The small punch test was found to be a sensitive and repeatable test method for evaluating the mechanical behavior of PMMA. In light of the results of this study, future small punch testing should be conducted at body temperature.

  2. Enhancing the performance of model-based elastography by incorporating additional a priori information in the modulus image reconstruction process

    International Nuclear Information System (INIS)

    Doyley, Marvin M; Srinivasan, Seshadri; Dimidenko, Eugene; Soni, Nirmal; Ophir, Jonathan

    2006-01-01

    Model-based elastography is fraught with problems owing to the ill-posed nature of the inverse elasticity problem. To overcome this limitation, we have recently developed a novel inversion scheme that incorporates a priori information concerning the mechanical properties of the underlying tissue structures, and the variance incurred during displacement estimation in the modulus image reconstruction process. The information was procured by employing standard strain imaging methodology, and introduced in the reconstruction process through the generalized Tikhonov approach. In this paper, we report the results of experiments conducted on gelatin phantoms to evaluate the performance of modulus elastograms computed with the generalized Tikhonov (GTK) estimation criterion relative to those computed by employing the un-weighted least-squares estimation criterion, the weighted least-squares estimation criterion and the standard Tikhonov method (i.e., the generalized Tikhonov method with no modulus prior). The results indicate that modulus elastograms computed with the generalized Tikhonov approach had superior elastographic contrast discrimination and contrast recovery. In addition, image reconstruction was more resilient to structural decorrelation noise when additional constraints were imposed on the reconstruction process through the GTK method

  3. Experimental Young's modulus calculations

    International Nuclear Information System (INIS)

    Chen, Y.; Jayakumar, R.; Yu, K.

    1994-01-01

    Coil is a very important magnet component. The turn location and the coil size impact both mechanical and magnetic behavior of the magnet. The Young's modulus plays a significant role in determining the coil location and size. Therefore, Young's modulus study is essential in predicting both the analytical and practical magnet behavior. To determine the coil Young's modulus, an experiment has been conducted to measure azimuthal sizes of a half quadrant QSE101 inner coil under different loading. All measurements are made at four different positions along an 8-inch long inner coil. Each measurement is repeated three times to determine the reproducibility of the experiment. To ensure the reliability of this experiment, the same measurement is performed twice with a open-quotes dummy coil,close quotes which is made of G10 and has the same dimension and similar azimuthal Young's modulus as the inner coil. The difference between the G10 azimuthal Young's modulus calculated from the experiments and its known value from the manufacturer will be compared. Much effort has been extended in analyzing the experimental data to obtain a more reliable Young's modulus. Analysis methods include the error analysis method and the least square method

  4. Demonstration and field trial of a resilient hybrid NG-PON test-bed

    Science.gov (United States)

    Prat, Josep; Polo, Victor; Schrenk, Bernhard; Lazaro, Jose A.; Bonada, Francesc; Lopez, Eduardo T.; Omella, Mireia; Saliou, Fabienne; Le, Quang T.; Chanclou, Philippe; Leino, Dmitri; Soila, Risto; Spirou, Spiros; Costa, Liliana; Teixeira, Antonio; Tosi-Beleffi, Giorgio M.; Klonidis, Dimitrios; Tomkos, Ioannis

    2014-10-01

    A multi-layer next generation PON prototype has been built and tested, to show the feasibility of extended hybrid DWDM/TDM-XGPON FTTH networks with resilient optically-integrated ring-trees architecture, supporting broadband multimedia services. It constitutes a transparent common platform for the coexistence of multiple operators sharing the optical infrastructure of the central metro ring, passively combining the access and the metropolitan network sections. It features 32 wavelength connections at 10 Gbps, up to 1000 users distributed in 16 independent resilient sub-PONs over 100 km. This paper summarizes the network operation, demonstration and field trial results.

  5. Psychological Trait Resilience Within Ecological Systems Theory: The Resilient Systems Scales.

    Science.gov (United States)

    Maltby, John; Day, Liz; Flowe, Heather D; Vostanis, Panos; Chivers, Sally

    2017-07-14

    This project describes the development of the Resilient Systems Scales, created to address conceptual and methodological ambiguities in assessing the ecological systems model of resilience. Across a number of samples (total N = 986), our findings suggest that the Resilient Systems Scales show equivalence to a previously reported assessment (Maltby, Day, & Hall, 2015 ) in demonstrating the same factor structure, adequate intercorrelation between the 2 measures of resilience, and equivalent associations with personality and well-being. The findings also suggest that the Resilient Systems Scales demonstrate adequate test-retest reliability, compare well with other extant measures of resilience in predicting well-being, and map, to varying degrees, onto positive expression of several cognitive, social, and emotional traits. The findings suggest that the new measure can be used alongside existing measures of resilience, or singly, to assess positive life outcomes within psychology research.

  6. A framework for assessing health system resilience in an economic crisis: Ireland as a test case.

    Science.gov (United States)

    Thomas, Steve; Keegan, Conor; Barry, Sarah; Layte, Richard; Jowett, Matt; Normand, Charles

    2013-10-30

    The financial crisis that hit the global economy in 2007 was unprecedented in the post war era. In general the crisis has created a difficult environment for health systems globally. The purpose of this paper is to develop a framework for assessing the resilience of health systems in terms of how they have adjusted to economic crisis. Resilience can be understood as the capacity of a system to absorb change but continue to retain essentially the same identity and function. The Irish health system is used as a case study to assess the usefulness of this framework. The authors identify three forms of resilience: financial, adaptive and transformatory. Indicators of performance are presented to allow for testing of the framework and measurement of system performance. Both quantitative and qualitative methods were used to yield data for the Irish case study. Quantitative data were collected from government documents and sources to understand the depth of the recession and the different dimensions of the response. Semi-structured interviews were conducted with key decision makers to understand the reasons for decisions made. In the Irish case there is mixed evidence on resilience. Health funding was initially protected but was then followed by deep cuts as the crisis deepened. There is strong evidence for adaptive resilience, with the health system showing efficiency gains from the recession. Nevertheless, easy efficiencies have been made and continued austerity will mean cuts in entitlements and services. The prospects for building and maintaining transformatory resilience are unsure. While the direction of reform is clear, and has been preserved to date, it is not certain whether it will remain manageable given continued austerity, some loss of sovereignty and capacity limitations. The three aspects of resilience proved a useful categorisation of performance measurement though there is overlap between them. Transformatory resilience may be more difficult to assess

  7. The evaluation of Young's modulus and residual stress of Cu films by NiFe/Cu bilayer film microbridge tests

    International Nuclear Information System (INIS)

    Zhou Zhimin; Zhou Yong; Cao Ying; Ding Wen; Mao Haiping

    2008-01-01

    This paper proposes a method to estimate the thickness limit for single-layer microbridge tests and also the thickness limit of one film on another film with known thickness for bilayer microbridge tests. To evaluate the mechanical properties of the Cu film, which could not be measured by single-layer microbridge tests, the NiFe single-layer film and NiFe/Cu bilayer film on silicon substrate are fabricated onto the microbridge by the MEMS technique. A load–deflection experiment is conducted upon the ceramic shaft adhered to the microbridge center by means of the XP nanoindenter system. From single-layer microbridge theory, Young's modulus and the residual stress of the NiFe film are deduced to be 192.74 ± 8.10 GPa and 287.75 ± 16.18 MPa, respectively. The data are introduced into bilayer microbridge theory and Young's modulus and the residual stress of the copper film are calculated to be 118.71 ± 6.54 GPa and 41.34 ± 4.42 MPa, respectively. The experimental results correspond well with those of nanoindentation

  8. Modular correction method of bending elastic modulus based on sliding behavior of contact point

    International Nuclear Information System (INIS)

    Ma, Zhichao; Zhao, Hongwei; Zhang, Qixun; Liu, Changyi

    2015-01-01

    During the three-point bending test, the sliding behavior of the contact point between the specimen and supports was observed, the sliding behavior was verified to affect the measurements of both deflection and span length, which directly affect the calculation of the bending elastic modulus. Based on the Hertz formula to calculate the elastic contact deformation and the theoretical calculation of the sliding behavior of the contact point, a theoretical model to precisely describe the deflection and span length as a function of bending load was established. Moreover, a modular correction method of bending elastic modulus was proposed, via the comparison between the corrected elastic modulus of three materials (H63 copper–zinc alloy, AZ31B magnesium alloy and 2026 aluminum alloy) and the standard modulus obtained from standard uniaxial tensile tests, the universal feasibility of the proposed correction method was verified. Also, the ratio of corrected to raw elastic modulus presented a monotonically decreasing tendency as the raw elastic modulus of materials increased. (technical note)

  9. The Effect of Annealing on the Elastic Modulus of Orthodontic Wires

    Science.gov (United States)

    Higginbottom, Kyle

    Introduction: Nickel Titanium orthodontic wires are currently used in orthodontic treatment due to their heat activated properties and their delivery of constant force. The objective of this study was to determine the effect of annealing on the elastic modulus of Nickel Titanium, Stainless Steel and Beta-titanium (TMA) wires. Different points along the wire were tested in order to determine how far from the annealed ends the elastic modulus of the wires was affected. Methods: Eighty (80) orthodontic wires consisting of 4 equal groups (SS/TMA/Classic NitinolRTM/Super Elastic NitinolRTM) were used as the specimens for this study. All wires were measured and marked at 5mm measurements, and cut into 33.00mm sections. The wires were heated with a butane torch until the first 13.00mm of the wires were red hot. Load deflection tests using an InstronRTM universal testing machine were run at 5mm distances from the end of the wire that had been annealed. The change in elastic modulus was then determined. Results: There was a significant difference (F = 533.001, p = 0.0005) in the change in elastic modulus for the four distances. There was also a significant difference (F = 57.571, p = 0.0005) in the change in elastic modulus for the four wire types. There was a significant interaction (F = 19.601, p = 0.005) between wire type and distance, however this interaction negated the differences between the wires. Conclusion: 1) There are significant differences in the changes in elastic modulus between the areas of the wires within the annealed section and those areas 5mm and 10mm away from the annealed section. The change in elastic modulus within the annealed section was significantly greater at 8 mm than it was at 13mm, and this was significantly greater than 18mm and 23mm (5mm and 10mm beyond the annealed section). However, there was no statistical difference in the change in elastic modulus between 5mm and 10mm away from the annealed section (18mm and 23mm respectively). 2

  10. Resilience in Aging Mice.

    Science.gov (United States)

    Kirkland, James L; Stout, Michael B; Sierra, Felipe

    2016-11-01

    Recently discovered interventions that target fundamental aging mechanisms have been shown to increase life span in mice and other species, and in some cases, these same manipulations have been shown to enhance health span and alleviate multiple age-related diseases and conditions. Aging is generally associated with decreases in resilience, the capacity to respond to or recover from clinically relevant stresses such as surgery, infections, or vascular events. We hypothesize that the age-related increase in susceptibility to those diseases and conditions is driven by or associated with the decrease in resilience. Thus, a test for resilience at middle age or even earlier could represent a surrogate approach to test the hypothesis that an intervention delays the process of aging itself. For this, animal models to test resilience accurately and predictably are needed. In addition, interventions that increase resilience might lead to treatments aimed at enhancing recovery following acute illnesses, or preventing poor outcomes from medical interventions in older, prefrail subjects. At a meeting of basic researchers and clinicians engaged in research on mechanisms of aging and care of the elderly, the merits and drawbacks of investigating effects of interventions on resilience in mice were considered. Available and potential stressors for assessing physiological resilience as well as the notion of developing a limited battery of such stressors and how to rank them were discussed. Relevant ranking parameters included value in assessing general health (as opposed to focusing on a single physiological system), ease of use, cost, reproducibility, clinical relevance, and feasibility of being repeated in the same animal longitudinally. During the discussions it became clear that, while this is an important area, very little is known or established. Much more research is needed in the near future to develop appropriate tests of resilience in animal models within an aging context

  11. Predicting Health Resilience in Pediatric Type 1 Diabetes: A Test of the Resilience Model Framework.

    Science.gov (United States)

    Rohan, Jennifer M; Huang, Bin; Pendley, Jennifer Shroff; Delamater, Alan; Dolan, Lawrence; Reeves, Grafton; Drotar, Dennis

    2015-10-01

    This research examined whether individual and family-level factors during the transition from late childhood to early adolescence protected individuals from an increased risk of poor glycemic control across time, which is a predictor of future diabetes-related complications (i.e., health resilience). This longitudinal, multisite study included 239 patients with type 1 diabetes and their caregivers. Glycemic control was based on hemoglobin A1c. Individual and family-level factors included: demographic variables, youth behavioral regulation, adherence (frequency of blood glucose monitoring), diabetes self-management, level of parental support for diabetes autonomy, level of youth mastery and responsibility for diabetes management, and diabetes-related family conflict. Longitudinal mixed-effects logistic regression indicated that testing blood glucose more frequently, better self-management, and less diabetes-related family conflict were indicators of health resilience. Multiple individual and family-level factors predicted risk for future health complications. Future research should develop interventions targeting specific individual and family-level factors to sustain glycemic control within recommended targets, which reduces the risk of developing future health complications during the transition to adolescence and adulthood. © The Author 2015. Published by Oxford University Press on behalf of the Society of Pediatric Psychology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  12. Investigation of statistical relationship between dynamic modulus and thermal strength of asphalt concrete

    International Nuclear Information System (INIS)

    Qadir, A.; Gular, M.

    2011-01-01

    Dynamic modulus is a performance indicator for asphalt concrete and is used to qualify asphalt mixtures based on stress-strain characteristics under repeated loading. Moreover, the low temperature cracking of asphalt concrete mixes are measured in terms of fracture strength and fracture temperature. Dynamic modulus test was selected as one of the simple performance tests in the AASHTO 2002 guidelines to rate mixtures according to permanent deformation performance. However, AASHTO 2002 guidelines is silent in relating dynamic modulus values to low temperature cracking, probably because of weak correlations reported between these two properties. The present study investigates the relation between these two properties under the influence of aggregate type and mix gradation. Mixtures were prepared with two types of aggregate and gradations, while maintaining the binder type and air voids constant. The mixtures were later tested for dynamic modulus and fracture strength using thermal stress restrained specimen test (TSRST). Results indicate that there exists a fair correlation between the thermal fracture strength and stiffness at a selected test temperature and frequency level. These correlations are highly dependent upon the type of aggregate and mix gradation. (author)

  13. Variation of the Young's modulus with plastic strain applying to elastoplastic software

    International Nuclear Information System (INIS)

    Morestin, F.; Boivin, M.

    1993-01-01

    Work hardening of steel involves modifications of the elastic properties of the material, for instance, an increase of its yield stress. It may be also the cause of an appreciable decrease of the Young's modulus. This property decreases as plastic strain increases. Experiments with a microcomputer controlled tensile test machine indicated that diminution could reach more than 10% of the initial value, after only 5% of plastic strain. In spite of this fact, lots of elastoplastic softwares don't combine the decrease of the Young's modulus with plastification though it may involve obvious differences among results. As an application we have developed a software which computes the deformation of steel sheet in press forming, after springback. This software takes into account the decrease of the Young's modulus and its results are very close to experimental values. Quite arbitrarily, we noticed a recovery of the Young's modulus of plastified specimens after few days but not for all steels tested. (author)

  14. Hopefulness predicts resilience after hereditary colorectal cancer genetic testing: a prospective outcome trajectories study

    OpenAIRE

    Chu Annie TW; Bonanno George A; Ho Judy WC; Ho Samuel MY; Chan Emily MS

    2010-01-01

    Abstract Background - Genetic testing for hereditary colorectal cancer (HCRC) had significant psychological consequences for test recipients. This prospective longitudinal study investigated the factors that predict psychological resilience in adults undergoing genetic testing for HCRC. Methods - A longitudinal study was carried out from April 2003 to August 2006 on Hong Kong Chinese HCRC family members who were recruited and offered genetic testing by the Hereditary Gastrointestinal Cancer R...

  15. Sources of organisational resiliency during the Thailand floods of 2011: a test of the bonding and bridging hypotheses.

    Science.gov (United States)

    Andrew, Simon; Arlikatti, Sudha; Siebeneck, Laura; Pongponrat, Kannapa; Jaikampan, Kraiwuth

    2016-01-01

    Based on the Institutional Collective Action framework, this research tests the impact of two competing hypotheses--bonding and bridging--on enhancing organisational resiliency. The bonding hypothesis posits that organisational resiliency can be achieved if an organisation works closely with others, whereas the bridging hypothesis argues that such a structure places considerable stress on an organisation and advocates for an organisation to position itself as a central actor to gain access to novel resources from a diverse set of entities to achieve resiliency. The paper analyses data gathered from semi-structured interviews with 44 public, private, and non-profit organisations serving communities affected by the Great Floods of 2011 in the Thai capital, Bangkok (urban), and in Pathum Thani (suburban) and Ayutthaya (rural) provinces. The findings suggest that: organisational resiliency was associated with the bridging effect; organisations in the rural province were more resilient than those in the suburban and urban centres; and private and non-governmental organisations generally were more resilient than public sector organisations. The findings highlight the importance of fostering multi-sector partnerships to enhance organisational resiliency for disaster response. © 2016 The Author(s). Disasters © Overseas Development Institute, 2016.

  16. Change and anisotropy of elastic modulus in sheet metals due to plastic deformation

    Science.gov (United States)

    Ishitsuka, Yuki; Arikawa, Shuichi; Yoneyama, Satoru

    2015-03-01

    In this study, the effect of the plastic deformation on the microscopic structure and the anisotropy of the elastic modulus in the cold-rolled steel sheet (SPCC) is investigated. Various uniaxial plastic strains (0%, 2.5%, 5%, 7.5%, and 10%) are applied to the annealed SPCC plates, then, the specimens for the tensile tests are cut out from them. The elastic moduli in the longitudinal direction and the transverse direction to the direction that are pre-strained are measured by the tensile tests. Cyclic tests are performed to investigate the effects of the internal friction caused by the movable dislocations in the elastic deformation. Also, the movable dislocations are quantified by the boundary tracking for TEM micrographs. In addition, the behaviors of the change of the elastic modulus in the solutionized and thermal aged aluminum alloy (A5052) are measured to investigate the effect on the movable dislocations with the amount of the depositions. As a result in SPCC, the elastic moduli of the 0° and 90° directions decrease more than 10% as 10% prestrain applied. On the other hand, the elastic modulus shows the recovery behavior after the strain aging and the annealing. The movable dislocation and the internal friction show a tendency to increase as the plastic strain increases. The marked anisotropy is not observed in the elastic modulus and the internal friction. The elastic modulus in A5052 with many and few depositions decreases similarly by the plastic deformation. From the above, the movable dislocations affect the elastic modulus strongly without depending on the deposition amount. Moreover, the elastic modulus recovers after the plastic deformation by reducing the effects of them with the strain aging and the heat treatment.

  17. A Prediction Method of Tensile Young's Modulus of Concrete at Early Age

    Directory of Open Access Journals (Sweden)

    Isamu Yoshitake

    2012-01-01

    Full Text Available Knowledge of the tensile Young's modulus of concrete at early ages is important for estimating the risk of cracking due to restrained shrinkage and thermal contraction. However, most often, the tensile modulus is considered equal to the compressive modulus and is estimated empirically based on the measurements of compressive strength. To evaluate the validity of this approach, the tensile Young's moduli of 6 concrete and mortar mixtures are measured using a direct tension test. The results show that the tensile moduli are approximately 1.0–1.3-times larger than the compressive moduli within the material's first week of age. To enable a direct estimation of the tensile modulus of concrete, a simple three-phase composite model is developed based on random distributions of coarse aggregate, mortar, and air void phases. The model predictions show good agreement with experimental measurements of tensile modulus at early age.

  18. Measuring resilience in integrated planning

    DEFF Research Database (Denmark)

    Apneseth, K.; Wahl, A. M.; Hollnagel, E.

    2013-01-01

    This chapter demonstrates how a Resilience Analysis Grid (RAG) can be used to profile the performance of a company in terms of the four abilities that characterize a resilient organization. It describes the development of a new, RAG-based tool founded on Resilience Engineering principles that can...... be used to assess an organization's resilience. The tool was tested in a case study involving a company in the offshore oil and gas industry. The company had decided to adopt an Integrated Operations (IO) approach to operations and maintenance planning and the tool was used to evaluate the impact...... of the Integrated Planning (IPL) process on its resilience....

  19. Young's Modulus of Single-Crystal Fullerene C Nanotubes

    Directory of Open Access Journals (Sweden)

    Tokushi Kizuka

    2012-01-01

    Full Text Available We performed bending tests on single-crystal nanotubes composed of fullerene C70 molecules by in situ transmission electron microscopy with measurements of loading forces by an optical deflection method. The nanotubes with the outer diameters of 270–470 nm were bent using simple-beam and cantilever-beam loading by the piezomanipulation of silicon nanotips. Young's modulus of the nanotubes increased from 61 GPa to 110 GPa as the outer diameter decreased from 470 nm to 270 nm. Young's modulus was estimated to be 66% of that of single-crystal C60 nanotubes of the same outer diameter.

  20. Flexural strength and modulus of elasticity of different types of resin-based composites.

    Science.gov (United States)

    Rodrigues Junior, Sinval Adalberto; Zanchi, Cesar Henrique; Carvalho, Rodrigo Varella de; Demarco, Flávio Fernando

    2007-01-01

    The aim of the study was to test whether the filler composition of resin composites influences their flexural strength and modulus of elasticity. Flexural strength and modulus of elasticity were obtained through a three-point bending test. Twelve bar shaped specimens of 5 commercially available composites--Supreme (3M/ESPE), a universal nanofilled composite; Esthet-X (Dentsply), Z-250 (3M/ESPE), Charisma (Heraeus Kulzer), universal hybrid composites; and Helio Fill (Vigodent), a microfine composite--were confectioned according to the ISO 4049/2000 specifications. The test was performed after a 7-days storage time using a universal test machine with a crosshead speed of 1 mm/min. The filler weight content was determined by the ashing technique. The data obtained on the mechanical properties were submitted to ANOVA and Tukey test (p elasticity results were observed among the universal hybrid composites. The nanofilled composite presented intermediary results. Within the limitations of this in vitro study, it could be concluded that the filler content significantly interfered in the flexural strength and modulus of elasticity of the composites tested.

  1. Assessing Resilience in Students Who Are Deaf or Blind: Supplementing Standardized Achievement Testing

    Science.gov (United States)

    Butler, Michelle A.; Katayama, Andrew D.; Schindling, Casey; Dials, Katherine

    2018-01-01

    Although testing accommodations for standardized assessments are available for students with disabilities, interpretation remains challenging. The authors explored resilience to see if it could contribute to the interpretation of academic success for students who are deaf or hard of hearing or blind or have low vision. High school students (30…

  2. Influence of grain size distribution on dynamic shear modulus of sands

    Directory of Open Access Journals (Sweden)

    Dyka Ireneusz

    2017-11-01

    Full Text Available The paper presents the results of laboratory tests, that verify the correlation between the grain-size characteristics of non-cohesive soils and the value of the dynamic shear modulus. The problem is a continuation of the research performed at the Institute of Soil Mechanics and Rock Mechanics in Karlsruhe, by T. Wichtmann and T. Triantafyllidis, who derived the extension of the applicability of the Hardin’s equation describing the explicite dependence between the grain size distribution of sands and the values of dynamic shear modulus. For this purpose, piezo-ceramic bender elements generating elastic waves were used to investigate the mechanical properties of the specimens with artificially generated particle distribution. The obtained results confirmed the hypothesis that grain size distribution of non-cohesive soils has a significant influence on the dynamic shear modulus, but at the same time they have shown that obtaining unambiguous results from bender element tests is a difficult task in practical applications.

  3. Performance of asphalt mixture incorporating recycled waste

    Science.gov (United States)

    Hamid, Nor Baizura; Abdullah, Mohd Ezree; Sanik, Mohd Erwan; Mokhtar, Mardiha; Kaamin, Masiri; Raduan, Rasyidah; Ramli, Mohd Zakwan

    2017-12-01

    Nowadays, the amount of premix waste was increased every year, especially at the batching plants. Normally, the waste materials will be discarded without doing any innovative and effective research about those materials. This situation has become one of the global concerns due to the increasing number of premix waste produced every year. Therefore, the aim of this study is to evaluate the performance of hot mix asphalt (HMA) using premix waste on improving asphalt mixture fatigue behaviour. The method used in this study was Superpave mix design method. The sample conducted in this study were 0%, 10%, 20%, 30%, and 100% of premix waste respectively. For a binder test, the laboratory test conducted were penetration test, softening test and thin film oven test while for the performance test were resilient modulus test and indirect tensile fatigue test. From the laboratory test, the resilient modulus test was conducted with two different temperature which was 25°C and 40°C. The result from that test was 20% of premix waste had higher resilient modulus at that two different temperatures compared to another samples. From that test also shown that the sample at the lower temperature which was 25°C has higher resilient modulus compared to the temperature of 40°C. Indirect tensile fatigue test showed that the 30% of premix waste sample was suitable for the modified asphalt mixture with referring to the maximum deformation and strain for comparison control, 10%,20%, and 100% of premix waste samples. So, it can be concluded that premix waste inhibits great potential as road construction material and suitable for repeated traffic loading.

  4. The instantaneous shear modulus in the shoving model

    DEFF Research Database (Denmark)

    Dyre, J. C.; Wang, W. H.

    2012-01-01

    We point out that the instantaneous shear modulus G∞ of the shoving model for the non-Arrhenius temperature dependence of viscous liquids’ relaxation time is the experimentally accessible highfrequency plateau modulus, not the idealized instantaneous affine shear modulus that cannot be measured....... Data for a large selection of metallic glasses are compared to three different versions of the shoving model. The original shear-modulus based version shows a slight correlation to the Poisson ratio, which is eliminated by the energy-landscape formulation of the model in which the bulk modulus plays...

  5. Modulus D-term inflation

    Science.gov (United States)

    Kadota, Kenji; Kobayashi, Tatsuo; Saga, Ikumi; Sumita, Keigo

    2018-04-01

    We propose a new model of single-field D-term inflation in supergravity, where the inflation is driven by a single modulus field which transforms non-linearly under the U(1) gauge symmetry. One of the notable features of our modulus D-term inflation scenario is that the global U(1) remains unbroken in the vacuum and hence our model is not plagued by the cosmic string problem which can exclude most of the conventional D-term inflation models proposed so far due to the CMB observations.

  6. Hardness and Elastic Modulus of Titanium Nitride Coatings Prepared by Pirac Method

    Science.gov (United States)

    Wu, Siyuan; Wu, Shoujun; Zhang, Guoyun; Zhang, Weiguo

    In the present work, hardness and elastic modulus of a titanium nitride coatings prepared on Ti6Al4V by powder immersion reaction-assisted coating (PIRAC) are tested and comparatively studied with a physical vapor deposition (PVD) TiN coating. Surface hardness of the PIRAC coatings is about 11GPa, much lower than that of PVD coating of 22GPa. The hardness distribution profile from surface to substrate of the PVD coatings is steeply decreased from ˜22GPa to ˜4.5GPa of the Ti6Al4V substrate. The PIRAC coatings show a gradually decreasing hardness distribution profile. Elastic modulus of the PVD coating is about 426GPa. The PIRAC coatings show adjustable elastic modulus. Elastic modulus of the PIRAC coatings prepared at 750∘C for 24h and that at 800∘C for 8h is about 234 and 293GPa, respectively.

  7. Young’s modulus of multi-layer microcantilevers

    Directory of Open Access Journals (Sweden)

    Zhikang Deng

    2017-12-01

    Full Text Available A theoretical model for calculating the Young’s modulus of multi-layer microcantilevers with a coating is proposed, and validated by a three-dimensional (3D finite element (FE model using ANSYS parametric design language (APDL and atomic force microscopy (AFM characterization. Compared with typical theoretical models (Rayleigh-Ritz model, Euler-Bernoulli (E-B beam model and spring mass model, the proposed theoretical model can obtain Young’s modulus of multi-layer microcantilevers more precisely. Also, the influences of coating’s geometric dimensions on Young’s modulus and resonant frequency of microcantilevers are discussed. The thickness of coating has a great influence on Young’s modulus and resonant frequency of multi-layer microcantilevers, and the coating should be considered to calculate Young’s modulus more precisely, especially when fairly thicker coating is employed.

  8. The Communities Advancing Resilience Toolkit (CART): an intervention to build community resilience to disasters.

    Science.gov (United States)

    Pfefferbaum, Rose L; Pfefferbaum, Betty; Van Horn, Richard L; Klomp, Richard W; Norris, Fran H; Reissman, Dori B

    2013-01-01

    Community resilience has emerged as a construct to support and foster healthy individual, family, and community adaptation to mass casualty incidents. The Communities Advancing Resilience Toolkit (CART) is a publicly available theory-based and evidence-informed community intervention designed to enhance community resilience by bringing stakeholders together to address community issues in a process that includes assessment, feedback, planning, and action. Tools include a field-tested community resilience survey and other assessment and analytical instruments. The CART process encourages public engagement in problem solving and the development and use of local assets to address community needs. CART recognizes 4 interrelated domains that contribute to community resilience: connection and caring, resources, transformative potential, and disaster management. The primary value of CART is its contribution to community participation, communication, self-awareness, cooperation, and critical reflection and its ability to stimulate analysis, collaboration, skill building, resource sharing, and purposeful action.

  9. Resilience Thinking: Integrating Resilience, Adaptability and Transformability

    Directory of Open Access Journals (Sweden)

    Carl Folke

    2010-12-01

    Full Text Available Resilience thinking addresses the dynamics and development of complex social-ecological systems (SES. Three aspects are central: resilience, adaptability and transformability. These aspects interrelate across multiple scales. Resilience in this context is the capacity of a SES to continually change and adapt yet remain within critical thresholds. Adaptability is part of resilience. It represents the capacity to adjust responses to changing external drivers and internal processes and thereby allow for development along the current trajectory (stability domain. Transformability is the capacity to cross thresholds into new development trajectories. Transformational change at smaller scales enables resilience at larger scales. The capacity to transform at smaller scales draws on resilience from multiple scales, making use of crises as windows of opportunity for novelty and innovation, and recombining sources of experience and knowledge to navigate social-ecological transitions. Society must seriously consider ways to foster resilience of smaller more manageable SESs that contribute to Earth System resilience and to explore options for deliberate transformation of SESs that threaten Earth System resilience.

  10. Can Resilience Thinking Inform Resilience Investments? Learning from Resilience Principles for Disaster Risk Reduction

    Directory of Open Access Journals (Sweden)

    Margot Hill Clarvis

    2015-07-01

    Full Text Available As the human and financial costs of natural disasters rise and state finances continue to deplete, increasing attention is being placed on the role of the private sector to support disaster and climate resilience. However, not only is there a recognised lack of private finance to fill this gap, but international institutional and financing bodies tend to prioritise specific reactive response over preparedness and general resilience building. This paper utilises the central tenets of resilience thinking that have emerged from scholarship on social-ecological system resilience as a lens through which to assess investing in disaster risk reduction (DRR for resilience. It draws on an established framework of resilience principles and examples of resilience investments to explore how resilience principles can actually inform decisions around DRR and resilience investing. It proposes some key lessons for diversifying sources of finance in order to, in turn, enhance “financial resilience”. In doing so, it suggests a series of questions to align investments with resilience building, and to better balance the achievement of the resilience principles with financial requirements such as financial diversification and replicability. It argues for a critical look to be taken at how resilience principles, which focus on longer-term systems perspectives, could complement the focus in DRR on critical and immediate stresses.

  11. Influence of the cementitious paste composition on the E-modulus and heat of hydration evolutions

    International Nuclear Information System (INIS)

    Maia, Lino; Azenha, Miguel; Faria, Rui; Figueiras, Joaquim

    2011-01-01

    E-modulus and heat of hydration are features of cement-based materials that follow a rapid rate of change at early ages. This paper analyses the influence of the composition of cementitious pastes on these features by using two methods: (i) a novel technique for continuously monitoring the E-modulus of cement-based materials, based on evaluating the first resonant frequency of a composite beam containing the material under testing, and (ii) an isothermal calorimeter to determine the released heat of hydration. Seventeen mixes are tested, encompassing pastes with five w/c ratios, as well as different contents of limestone filler, fly ash, silica fume and metakaolin. The results permit the comparison of the E-modulus and heat of hydration sensitivities to mix composition changes, and to check possible relations between these features. This work also helps to establish the technique (i) as a non-destructive method for monitoring the E-modulus evolution in cement-based materials since casting.

  12. Diamond-like carbon coatings enhance the hardness and resilience of bearing surfaces for use in joint arthroplasty.

    Science.gov (United States)

    Roy, M E; Whiteside, L A; Xu, J; Katerberg, B J

    2010-04-01

    The purpose of this study was to evaluate the potential of a hard diamond-like carbon (DLC) coating to enhance the hardness and resilience of a bearing surface in joint replacement. The greater hardness of a magnesium-stabilized zirconium (Mg-PSZ) substrate was expected to provide a harder coating-substrate composite microhardness than the cobalt-chromium alloy (CoCr) also used in arthroplasty. Three femoral heads of each type (CoCr, Mg-PSZ, DLC-CoCr and DLC-Mg-PSZ) were examined. Baseline (non-coated) and composite coating/substrate hardness was measured by Vickers microhardness tests, while nanoindentation tests measured the hardness and elastic modulus of the DLC coating independent of the Mg-PSZ and CoCr substrates. Non-coated Mg-PSZ heads were considerably harder than non-coated CoCr heads, while DLC coating greatly increased the microhardness of the CoCr and Mg-PSZ substrates. On the nanoscale the non-coated heads were much harder than on the microscale, with CoCr exhibiting twice as much plastic deformation as Mg-PSZ. The mechanical properties of the DLC coatings were not significantly different for both the CoCr and Mg-PSZ substrates, producing similar moduli of resilience and plastic resistance ratios. DLC coatings greatly increased hardness on both the micro and nano levels and significantly improved resilience and resistance to plastic deformation compared with non-coated heads. Because Mg-PSZ allows less plastic deformation than CoCr and provides a greater composite microhardness, DLC-Mg-PSZ will likely be more durable for use as a bearing surface in vivo. Copyright 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  13. Theoretical modeling developed to evaluate the hardness and reduced modulus for the C/a-Si composite film using nanoindentation tests

    International Nuclear Information System (INIS)

    Han, C.-F.; Lin, J.-F.; Chung, C.-K.; Wu, B.-H.

    2008-01-01

    A general mechanical model, which is composed of the mechanical models employed to describe the contact behaviors and deformations arising in all layers (including the substrate), is successfully developed in the present study for multilayer specimens in order to evaluate the contact projected area by a theoretical model, and thus the hardness and reduced modulus, using nanoindentation tests. The governing differential equations for the depth solutions of the indenter tip formed at all layers of the specimen under their contact load are developed individually. The influence of the material properties of the substrate on a multilayer specimen's hardness and reduced modulus at various indentation depths can thus be evaluated. Transition and pop-in occurred at depths near, but still before, the C (top layer)/a-Si (buffer layer) interface and the a-Si/Si (substrate) interface, respectively. Using the present analysis, the depths corresponding to the transition and pop-in behaviors can be predicted effectively

  14. Evaluating elastic modulus and strength of hard coatings by relative method

    International Nuclear Information System (INIS)

    Bao, Y.W.; Zhou, Y.C.; Bu, X.X.; Qiu, Y.

    2007-01-01

    A simple approach named relative method is developed for determining the elastic modulus and strength of hard coatings. Analytical relationship among the moduli of the film, the substrate, and the film/substrate system was derived based on bending model, from which the elastic modulus of the coating can be determined uniquely via the measured moduli of the samples before and after coating. Furthermore, the relationship between the strength of the films and the bending strength of the coated sample is derived, thus both the modulus and the strength of coating can be evaluated via traditional tests on coated samples. Mathematic expressions of those calculations were derived, respectively for rectangular beam samples with three types of coating configurations: single face coating, sandwich coating and around coating. Experimental results using various brittle coatings demonstrated the validity and convenience of this method

  15. Evaluating elastic modulus and strength of hard coatings by relative method

    Energy Technology Data Exchange (ETDEWEB)

    Bao, Y.W. [Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016 (China); China Building Materials Academy, Beijing 100024 (China)], E-mail: ywbao@imr.ac.cn; Zhou, Y.C. [Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016 (China); Bu, X.X. [China Building Materials Academy, Beijing 100024 (China); Qiu, Y. [China Building Materials Academy, Beijing 100024 (China)

    2007-06-15

    A simple approach named relative method is developed for determining the elastic modulus and strength of hard coatings. Analytical relationship among the moduli of the film, the substrate, and the film/substrate system was derived based on bending model, from which the elastic modulus of the coating can be determined uniquely via the measured moduli of the samples before and after coating. Furthermore, the relationship between the strength of the films and the bending strength of the coated sample is derived, thus both the modulus and the strength of coating can be evaluated via traditional tests on coated samples. Mathematic expressions of those calculations were derived, respectively for rectangular beam samples with three types of coating configurations: single face coating, sandwich coating and around coating. Experimental results using various brittle coatings demonstrated the validity and convenience of this method.

  16. Development of a multi-dimensional measure of resilience in adolescents: the Adolescent Resilience Questionnaire

    Directory of Open Access Journals (Sweden)

    Buzwell Simone

    2011-10-01

    Full Text Available Abstract Background The concept of resilience has captured the imagination of researchers and policy makers over the past two decades. However, despite the ever growing body of resilience research, there is a paucity of relevant, comprehensive measurement tools. In this article, the development of a theoretically based, comprehensive multi-dimensional measure of resilience in adolescents is described. Methods Extensive literature review and focus groups with young people living with chronic illness informed the conceptual development of scales and items. Two sequential rounds of factor and scale analyses were undertaken to revise the conceptually developed scales using data collected from young people living with a chronic illness and a general population sample. Results The revised Adolescent Resilience Questionnaire comprises 93 items and 12 scales measuring resilience factors in the domains of self, family, peer, school and community. All scales have acceptable alpha coefficients. Revised scales closely reflect conceptually developed scales. Conclusions It is proposed that, with further psychometric testing, this new measure of resilience will provide researchers and clinicians with a comprehensive and developmentally appropriate instrument to measure a young person's capacity to achieve positive outcomes despite life stressors.

  17. Resilience versus "Resilient Individual": What Exactly Do We Study?

    Directory of Open Access Journals (Sweden)

    Jan Sebastian Novotný

    2014-07-01

    Full Text Available The nature and definition of resilience, despite the extensive 40 years of research, is still unclear. Currently is resilience seen as a personality trait, sum of the traits/factors, result of adaptation, or as a process. The concept of resilience as personality traits is usually tied to uni-dimensional or "simplex" theories of resistance as Hardiness, Sense of Control, Ego-Resiliency, Self-efficacy, Sense of Coherence, or specific personality traits. Multidimensional concepts see resilience as a complex of personality and social (environmental factors that work in interaction, complement or replace each other, and, in aggregate, create a comprehensive picture of resilience. The concept of resilience as the result of adaptation examines resilience in terms of the presence/absence of adverse/pathological manifestations, consequences and outcomes in relation to the earlier effect of stressful, risky or otherwise unfavorable situations. Finally, the concept of resilience as the process examines individual's response to risk factors or wounds that are present in the environment. Resilience is thus a process consisting of interactions between individual characteristics and the environment. Most experts and a large part of resilience research is based on the first three concepts that however explore how "resilient" the individual is rather than resilience itself, since they are based on "diagnosing" or at best dimensional, at worse dichotomous rating of the individual's resilience (within personality trait approach, or on the evaluation of the presence/absence of factors/source of resilience, thereby they are still holding the "diagnostic" approach (within multidimensional approach. Only the examination of processes, such as the ongoing interaction between these risk factors, resilience factors, outcomes (expressions of personality, behavior, presence of problems, etc. and other variables allows us to understand resilience (the true nature of how

  18. Developing Mathematical Resilience of Prospective Math Teachers

    Science.gov (United States)

    Ariyanto, L.; Herman, T.; Sumarmo, U.; Suryadi, D.

    2017-09-01

    Prospective math teachers need to develop positive adaptive attitudes toward mathematics that will enable them to continue learning despite having to deal with obstacles and difficulties. This research focuses on the resilience improvement of the prospective mathematic teachers after being treated using problem-based learning based on their basic knowledge on mathematic and their overall knowledge on math. This research used only one group for pre-test and post-test. The result of this research shows that there is improvement on prospective teachers’ resilience after they were given treatment using problem-based learning. One of the factors causing the resilience improvement of the prospective mathematic teachers is the instructions on students’ work sheet. In the instructions, stud ents were asked to write difficulties in solving math problems as well as write down the solution they take to overcome them. This research can be used as a reference for other researchers who want to do the same research related on students’ resiliency o n math and or math lecturers to improve the resilience of prospective teachers to be resilient teachers on math in the future.

  19. Thermal compression modulus of polarized neutron matter

    International Nuclear Information System (INIS)

    Abd-Alla, M.

    1990-05-01

    We applied the equation of state for pure polarized neutron matter at finite temperature, calculated previously, to calculate the compression modulus. The compression modulus of pure neutron matter at zero temperature is very large and reflects the stiffness of the equation of state. It has a little temperature dependence. Introducing the spin excess parameter in the equation of state calculations is important because it has a significant effect on the compression modulus. (author). 25 refs, 2 tabs

  20. Identifying resilient and non-resilient middle-adolescents in a ...

    African Journals Online (AJOL)

    The aim in this study was to develop a way of identifying resilient and non- resilient middle adolescents in a formerly black-only urban residential (township) school, in order to ultimately support the development of learners' resilience under stressful circumstances. A Resilience Scale was developed to screen for resilient ...

  1. Building from a conceptual model of the resilience process during ageing, towards the Groningen Aging Resilience Inventory.

    Science.gov (United States)

    van Abbema, Renske; Bielderman, Annemiek; De Greef, Mathieu; Hobbelen, Hans; Krijnen, Wim; van der Schans, Cees

    2015-09-01

    To develop and psychometrically test the Groningen Ageing Resilience Inventory. Ageing is a process that is often accompanied by functional limitation, disabilities and losses. Instead of focusing on these negative events of ageing, there are opportunities in focusing on adaptation mechanisms, like resilience, that are helpful to cope with those adversities. Cross-sectional study. The study was conducted from 2011-2012. First, a conceptual model of resilience during the ageing process was constructed. Next, items were formulated that made up a comprehensive template questionnaire reflecting the model. Finally, a cross-sectional study was performed to evaluate the construct validity and internal consistency of this template 16-item questionnaire. Participants (N = 229) with a mean age of 71·5 years, completed the template 16-item Groningen Ageing Resilience Inventory, and performance based tests and psychological questionnaires. Exploratory factor analysis resulted in a two factor solution of internal and external resources of resilience. Three items did not discriminate well between the two factors and were deleted, remaining a final 13-item questionnaire that shows evidence of good internal consistency. The direction and magnitude of the correlations with other measures support the construct validity. The Groningen Ageing Resilience Inventory is a useful instrument that can help nurses, other healthcare workers, researchers and providers of informal care to identify the internal and external resources of resilience in individuals and groups. In a multidisciplinary biopsychosocial approach this knowledge provides tools for empowering older patients in performing health promoting behaviors and self-care tasks. © 2015 John Wiley & Sons Ltd.

  2. Developing a workplace resilience instrument.

    Science.gov (United States)

    Mallak, Larry A; Yildiz, Mustafa

    2016-05-27

    Resilience benefits from the use of protective factors, as opposed to risk factors, which are associated with vulnerability. Considerable research and instrument development has been conducted in clinical settings for patients. The need existed for an instrument to be developed in a workplace setting to measure resilience of employees. This study developed and tested a resilience instrument for employees in the workplace. The research instrument was distributed to executives and nurses working in the United States in hospital settings. Five-hundred-forty completed and usable responses were obtained. The instrument contained an inventory of workplace resilience, a job stress questionnaire, and relevant demographics. The resilience items were written based on previous work by the lead author and inspired by Weick's [1] sense-making theory. A four-factor model yielded an instrument having psychometric properties showing good model fit. Twenty items were retained for the resulting Workplace Resilience Instrument (WRI). Parallel analysis was conducted with successive iterations of exploratory and confirmatory factor analyses. Respondents were classified based on their employment with either a rural or an urban hospital. Executives had significantly higher WRI scores than nurses, controlling for gender. WRI scores were positively and significantly correlated with years of experience and the Brief Job Stress Questionnaire. An instrument to measure individual resilience in the workplace (WRI) was developed. The WRI's four factors identify dimensions of workplace resilience for use in subsequent investigations: Active Problem-Solving, Team Efficacy, Confident Sense-Making, and Bricolage.

  3. Calculation of wear (f.i. wear modulus) in the plastic cup of a hip joint prosthesis

    NARCIS (Netherlands)

    Ligterink, D.J.

    1975-01-01

    The wear equation is applied to the wear process in a hip joint prosthesis and a wear modulus is defined. The sliding distance, wear modulus, wear volume, wear area, contact angle and the maximum normal stress were calculated and the theoretical calculations applied to test results. During the wear

  4. Determination of elastic modulus and residual stress of plasma-sprayed tungsten coating on steel substrate

    Science.gov (United States)

    You, J. H.; Höschen, T.; Lindig, S.

    2006-01-01

    Plasma-sprayed tungsten, which is a candidate material for the first wall armour, shows a porous, heterogeneous microstructure. Due to its characteristic morphology, the properties are significantly different from those of its dense bulk material. Measurements of the elastic modulus of this coating have not been reported in the literature. In this work Young's modulus of highly porous plasma-sprayed tungsten coatings deposited on steel (F82H) substrates was measured. For the fabrication of the coating system the vacuum plasma-spray process was applied. Measurements were performed by means of three-point and four-point bending tests. The obtained modulus values ranged from 53 to 57 GPa. These values could be confirmed by the test result of a detached coating strip, which was 54 GPa. The applied methods produced consistent results regardless of testing configurations and specimen sizes. The errors were less than 1%. Residual stress of the coating was also estimated.

  5. Determination of elastic modulus and residual stress of plasma-sprayed tungsten coating on steel substrate

    International Nuclear Information System (INIS)

    You, J.H.; Hoeschen, T.; Lindig, S.

    2006-01-01

    Plasma-sprayed tungsten, which is a candidate material for the first wall armour, shows a porous, heterogeneous microstructure. Due to its characteristic morphology, the properties are significantly different from those of its dense bulk material. Measurements of the elastic modulus of this coating have not been reported in the literature. In this work Young's modulus of highly porous plasma-sprayed tungsten coatings deposited on steel (F82H) substrates was measured. For the fabrication of the coating system the vacuum plasma-spray process was applied. Measurements were performed by means of three-point and four-point bending tests. The obtained modulus values ranged from 53 to 57 GPa. These values could be confirmed by the test result of a detached coating strip, which was 54 GPa. The applied methods produced consistent results regardless of testing configurations and specimen sizes. The errors were less than 1%. Residual stress of the coating was also estimated

  6. Resilience Thinking: Integrating Resilience, Adaptability and Transformability

    NARCIS (Netherlands)

    Folke, C.; Carpenter, S.R.; Walker, B.; Scheffer, M.; Chapin, T.; Rockstrom, J.

    2010-01-01

    Resilience thinking addresses the dynamics and development of complex social-ecological systems (SES). Three aspects are central: resilience, adaptability and transformability. These aspects interrelate across multiple scales. Resilience in this context is the capacity of a SES to continually change

  7. Constructing Resilience: The Wellington Studio

    Directory of Open Access Journals (Sweden)

    Penny Allan

    2014-08-01

    Full Text Available This paper describes the results of a design studio on climate change at Victoria University of Wellington (VUW, New Zealand, in 2007. It discusses the processes and outcomes of the studio and the subsequent testing of student work against a resilience model developed by Canadian ecologist CS Holling (1973, 1998; Walker et al, 2004 to create a framework for the design of resilient cities.

  8. Diagnostic procedure on brake pad assembly based on Young's modulus estimation

    International Nuclear Information System (INIS)

    Chiariotti, P; Santolini, C; Tomasini, E P; Martarelli, M

    2013-01-01

    Quality control of brake pads is an important issue, since the pad is a key component of the braking system. Typical damage of a brake pad assembly is the pad–backing plate detachment that affects and modifies the mechanical properties of the whole system. The most sensitive parameter to the damage is the effective Young's modulus, since the damage induces a decrease of the pad assembly stiffness and therefore of its effective Young's modulus: indeed its variation could be used for diagnostic purposes. The effective Young's modulus can be estimated from the first bending resonance frequency identified from the frequency response function measured on the pad assembly. Two kinds of excitation methods, i.e. conventional impulse excitation and magnetic actuation, will be presented and two different measurement sensors, e.g. laser Doppler vibrometer and microphone, analyzed. The robustness of the effective Young's modulus as a diagnostic feature will be demonstrated in comparison to the first bending resonance frequency, which is more sensitive to geometrical dimensions. Variability in the sample dimension, in fact, will induce a variation of the resonance frequency which could be mistaken for damage. The diagnostic approach has been applied to a set of undamaged and damaged pad assemblies showing good performance in terms of damage identification. The environmental temperature can be an important interfering input for the diagnostic procedure, since it influences the effective Young's modulus of the assembly. For that reason, a test at different temperatures in the range between 15 °C and 30 °C has been performed, evidencing that damage identification technique is efficient at any temperature. The robustness of the Young's modulus as a diagnostic feature with respect to damping is also presented. (paper)

  9. Dynamic modulus of nanosilica modified porous asphalt

    Science.gov (United States)

    Arshad, A. K.; Masri, K. A.; Ahmad, J.; Samsudin, M. S.

    2017-11-01

    Porous asphalt (PA) is a flexible pavement layer with high interconnected air void contents and constructed using open-graded aggregates. Due to high temperature environment and increased traffic volume in Malaysia, PA may have deficiencies particularly in rutting and stiffness of the mix. A possible way to improve these deficiencies is to improve the asphalt binder used. Binder is normally modified using polymer materials to improve its properties. However, nanotechnology presently is being gradually used for asphalt modification. Nanosilica (NS), a byproduct of rice husk and palm oil fuel ash is used as additive in this study. The aim of this study is to enhance the rutting resistance and stiffness performance of PA using NS. This study focused on the performance of PA in terms of dynamic modulus with the addition of NS modified binder to produce better and more durable PA. From the result of Dynamic SPT Test, it shows that the addition of NS was capable in enhancing the stiffness and rutting resistance of PA. The addition of NS also increase the dynamic modulus value of PA by 50%.

  10. A quantitative method for assessing resilience of interdependent infrastructures

    International Nuclear Information System (INIS)

    Nan, Cen; Sansavini, Giovanni

    2017-01-01

    The importance of understanding system resilience and identifying ways to enhance it, especially for interdependent infrastructures our daily life depends on, has been recognized not only by academics, but also by the corporate and public sectors. During recent years, several methods and frameworks have been proposed and developed to explore applicable techniques to assess and analyze system resilience in a comprehensive way. However, they are often tailored to specific disruptive hazards/events, or fail to properly include all the phases such as absorption, adaptation, and recovery. In this paper, a quantitative method for the assessment of the system resilience is proposed. The method consists of two components: an integrated metric for system resilience quantification and a hybrid modeling approach for representing the failure behavior of infrastructure systems. The feasibility and applicability of the proposed method are tested using an electric power supply system as the exemplary infrastructure. Simulation results highlight that the method proves effective in designing, engineering and improving the resilience of infrastructures. Finally, system resilience is proposed as a proxy to quantify the coupling strength between interdependent infrastructures. - Highlights: • A method for quantifying resilience of interdependent infrastructures is proposed. • It combines multi-layer hybrid modeling and a time-dependent resilience metric. • The feasibility of the proposed method is tested on the electric power supply system. • The method provides insights to decision-makers for strengthening system resilience. • Resilience capabilities can be used to engineer interdependencies between subsystems.

  11. Influence of substrate modulus on gecko adhesion

    Science.gov (United States)

    Klittich, Mena R.; Wilson, Michael C.; Bernard, Craig; Rodrigo, Rochelle M.; Keith, Austin J.; Niewiarowski, Peter H.; Dhinojwala, Ali

    2017-03-01

    The gecko adhesion system fascinates biologists and materials scientists alike for its strong, reversible, glue-free, dry adhesion. Understanding the adhesion system’s performance on various surfaces can give clues as to gecko behaviour, as well as towards designing synthetic adhesive mimics. Geckos encounter a variety of surfaces in their natural habitats; tropical geckos, such as Gekko gecko, encounter hard, rough tree trunks as well as soft, flexible leaves. While gecko adhesion on hard surfaces has been extensively studied, little work has been done on soft surfaces. Here, we investigate for the first time the influence of macroscale and nanoscale substrate modulus on whole animal adhesion on two different substrates (cellulose acetate and polydimethylsiloxane) in air and find that across 5 orders of magnitude in macroscale modulus, there is no change in adhesion. On the nanoscale, however, gecko adhesion is shown to depend on substrate modulus. This suggests that low surface-layer modulus may inhibit the gecko adhesion system, independent of other influencing factors such as macroscale composite modulus and surface energy. Understanding the limits of gecko adhesion is vital for clarifying adhesive mechanisms and in the design of synthetic adhesives for soft substrates (including for biomedical applications and wearable electronics).

  12. Proposal of Design Formulae for Equivalent Elasticity of Masonry Structures Made with Bricks of Low Modulus

    Directory of Open Access Journals (Sweden)

    Muhammad Ridwan

    2017-01-01

    Full Text Available Bricks of low elastic modulus are occasionally used in some developing countries, such as Indonesia and India. Most of the previous research efforts focused on masonry structures built with bricks of considerably high elastic modulus. The objective of this study is to quantify the equivalent elastic modulus of lower-stiffness masonry structures, when the mortar has a higher modulus of elasticity than the bricks, by employing finite element (FE simulations and adopting the homogenization technique. The reported numerical simulations adopted the two-dimensional representative volume elements (RVEs using quadrilateral elements with four nodes. The equivalent elastic moduli of composite elements with various bricks and mortar were quantified. The numerically estimated equivalent elastic moduli from the FE simulations were verified using previously established test data. Hence, a new simplified formula for the calculation of the equivalent modulus of elasticity of such masonry structures is proposed in the present study.

  13. Non-toxic invert analog glass compositions of high modulus

    Science.gov (United States)

    Bacon, J. F. (Inventor)

    1974-01-01

    Glass compositions having a Young's modulus of at least 15 million psi are described. They and a specific modulus of at least 110 million inches consist essentially of, in mols, 15 to 40% SiO2, 6 to 15% Li2O, 24 to 45% of at least two bivalent oxides selected from the group consisting of Ca, NzO, MgO and CuO; 13 to 39% of at least two trivalent oxides selected from the group consisting of Al2O3, Fe2O3, B2O3, La2O3, and Y2O3 and up to 15% of one or more tetravelent oxides selected from the group consisting of ZrO2, TiO2 and CeO2. The high modulus, low density glass compositions contain no toxic elements. The composition, glass density, Young's modulus, and specific modulus for 28 representative glasses are presented. The fiber modulus of five glasses are given.

  14. Resilience thinking: integrating resilience, adaptability and transformability

    Science.gov (United States)

    Carl Folke; Stephen R. Carpenter; Brian Walker; Marten Scheffer; Terry Chapin; Johan. Rockstrom

    2010-01-01

    Resilience thinking addresses the dynamics and development of complex social-ecological systems (SES). Three aspects are central: resilience, adaptability and transformability. These aspects interrelate across multiple scales. Resilience in this context is the capacity of a SES to continually change and adapt yet remain within critical thresholds. Adaptability is part...

  15. Modelling of the Elasticity Modulus for Rock Using Genetic Expression Programming

    Directory of Open Access Journals (Sweden)

    Umit Atici

    2016-01-01

    Full Text Available In rock engineering projects, statically determined parameters are more reflective of actual load conditions than dynamic parameters. This study reports a new and efficient approach to the formulation of the static modulus of elasticity Es applying gene expression programming (GEP with nondestructive testing (NDT methods. The results obtained using GEP are compared with the results of multivariable linear regression analysis (MRA, univariate nonlinear regression analysis (URA, and the dynamic elasticity modulus (Ed. The GEP model was found to produce the most accurate calculation of Es. The proposed approach is a simple, nondestructive, and practical way to determine Es for anisotropic and heterogeneous rocks.

  16. A high-damping magnetorheological elastomer with bi-directional magnetic-control modulus for potential application in seismology

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Miao, E-mail: yumiao@cqu.edu.cn; Qi, Song; Fu, Jie; Zhu, Mi [Key Lab for Optoelectronic Technology and Systems, Ministry of Education, College of Optoelectronic Engineering, Chongqing University, Chongqing 400044 (China)

    2015-09-14

    A high-damping magnetorheological elastomer (MRE) with bi-directional magnetic-control modulus is developed. This MRE was synthesized by filling NdFeB particles into polyurethane (PU)/ epoxy (EP) interpenetrating network (IPN) structure. The anisotropic samples were prepared in a permanent magnetic field and magnetized in an electromagnetic field of 1 T. Dynamic mechanical responses of the MRE to applied magnetic fields are investigated through magneto-rheometer, and morphology of MREs is observed via scanning electron microscope (SEM). Test result indicates that when the test field orientation is parallel to that of the sample's magnetization, the shear modulus of sample increases. On the other hand, when the orientation is opposite to that of the sample's magnetization, shear modulus decreases. In addition, this PU/EP IPN matrix based MRE has a high-damping property, with high loss factor and can be controlled by applying magnetic field. It is expected that the high damping property and the ability of bi-directional magnetic-control modulus of this MRE offer promising advantages in seismologic application.

  17. Variable modulus cellular structures using pneumatic artificial muscles

    Science.gov (United States)

    Pontecorvo, Michael E.; Niemiec, Robert J.; Gandhi, Farhan S.

    2014-04-01

    This paper presents a novel variable modulus cellular structure based on a hexagonal unit cell with pneumatic artificial muscle (PAM) inclusions. The cell considered is pin-jointed, loaded in the horizontal direction, with three PAMs (one vertical PAM and two horizontal PAMs) oriented in an "H" configuration between the vertices of the cell. A method for calculation of the hexagonal cell modulus is introduced, as is an expression for the balance of tensile forces between the horizontal and vertical PAMs. An aluminum hexagonal unit cell is fabricated and simulation of the hexagonal cell with PAM inclusions is then compared to experimental measurement of the unit cell modulus in the horizontal direction with all three muscles pressurized to the same value over a pressure range up to 758 kPa. A change in cell modulus by a factor of 1.33 and a corresponding change in cell angle of 0.41° are demonstrated experimentally. A design study via simulation predicts that differential pressurization of the PAMs up to 2068 kPa can change the cell modulus in the horizontal direction by a factor of 6.83 with a change in cell angle of only 2.75°. Both experiment and simulation show that this concept provides a way to decouple the length change of a PAM from the change in modulus to create a structural unit cell whose in-plane modulus in a given direction can be tuned based on the orientation of PAMs within the cell and the pressure supplied to the individual muscles.

  18. From resilience thinking to Resilience Planning: Lessons from practice.

    Science.gov (United States)

    Sellberg, M M; Ryan, P; Borgström, S T; Norström, A V; Peterson, G D

    2018-07-01

    Resilience thinking has frequently been proposed as an alternative to conventional natural resource management, but there are few studies of its applications in real-world settings. To address this gap, we synthesized experiences from practitioners that have applied a resilience thinking approach to strategic planning, called Resilience Planning, in regional natural resource management organizations in Australia. This case represents one of the most extensive and long-term applications of resilience thinking in the world today. We conducted semi-structured interviews with Resilience Planning practitioners from nine organizations and reviewed strategic planning documents to investigate: 1) the key contributions of the approach to their existing strategic planning, and 2) what enabled and hindered the practitioners in applying and embedding the new approach in their organizations. Our results reveal that Resilience Planning contributed to developing a social-ecological systems perspective, more adaptive and collaborative approaches to planning, and that it clarified management goals of desirable resource conditions. Applying Resilience Planning required translating resilience thinking to practice in each unique circumstance, while simultaneously creating support among staff, and engaging external actors. Embedding Resilience Planning within organizations implied starting and maintaining longer-term change processes that required sustained multi-level organizational support. We conclude by identifying four lessons for successfully applying and embedding resilience practice in an organization: 1) to connect internal "entrepreneurs" to "interpreters" and "networkers" who work across organizations, 2) to assess the opportunity context for resilience practice, 3) to ensure that resilience practice is a learning process that engages internal and external actors, and 4) to develop reflective strategies for managing complexity and uncertainty. Copyright © 2018 The Authors

  19. A new multidimensional measure of personal resilience and its use: Chinese nurse resilience, organizational socialization and career success.

    Science.gov (United States)

    Wei, Wei; Taormina, Robert J

    2014-12-01

    This study refined the concept of resilience and developed four valid and reliable subscales to measure resilience, namely, Determination, Endurance, Adaptability and Recuperability. The study also assessed their hypothesized relationships with six antecedent variables (worry, physiological needs satisfaction, organizational socialization, conscientiousness, future orientation and Chinese values) and with one outcome variable (nurses' career success). The four new 10-item subscale measures of personal resilience were constructed based on their operational definitions and tested for their validity and reliability. All items were included in a questionnaire completed by 244 full-time nurses at two hospitals in China. All four measures demonstrated concurrent validity and had high reliabilities (from 0.74 to 0.78). The hypothesized correlations with the personality and organizational variables were statistically significant and in the predicted directions. Regression analyses confirmed these relationships, which explained 25-32% of the variance for the four resilience facets and 27% of the variance for the nurses' career success. The results provided strong evidence that organizational socialization facilitates resilience, that resilience engenders career success and that identifying the four resilience facets permits a more complete understanding of personal resilience, which could benefit nurses, help nurse administrators with their work and also help in treating patients. © 2014 John Wiley & Sons Ltd.

  20. Resilience through adaptation.

    Directory of Open Access Journals (Sweden)

    Guus A Ten Broeke

    Full Text Available Adaptation of agents through learning or evolution is an important component of the resilience of Complex Adaptive Systems (CAS. Without adaptation, the flexibility of such systems to cope with outside pressures would be much lower. To study the capabilities of CAS to adapt, social simulations with agent-based models (ABMs provide a helpful tool. However, the value of ABMs for studying adaptation depends on the availability of methodologies for sensitivity analysis that can quantify resilience and adaptation in ABMs. In this paper we propose a sensitivity analysis methodology that is based on comparing time-dependent probability density functions of output of ABMs with and without agent adaptation. The differences between the probability density functions are quantified by the so-called earth-mover's distance. We use this sensitivity analysis methodology to quantify the probability of occurrence of critical transitions and other long-term effects of agent adaptation. To test the potential of this new approach, it is used to analyse the resilience of an ABM of adaptive agents competing for a common-pool resource. Adaptation is shown to contribute positively to the resilience of this ABM. If adaptation proceeds sufficiently fast, it may delay or avert the collapse of this system.

  1. Resilience through adaptation.

    Science.gov (United States)

    Ten Broeke, Guus A; van Voorn, George A K; Ligtenberg, Arend; Molenaar, Jaap

    2017-01-01

    Adaptation of agents through learning or evolution is an important component of the resilience of Complex Adaptive Systems (CAS). Without adaptation, the flexibility of such systems to cope with outside pressures would be much lower. To study the capabilities of CAS to adapt, social simulations with agent-based models (ABMs) provide a helpful tool. However, the value of ABMs for studying adaptation depends on the availability of methodologies for sensitivity analysis that can quantify resilience and adaptation in ABMs. In this paper we propose a sensitivity analysis methodology that is based on comparing time-dependent probability density functions of output of ABMs with and without agent adaptation. The differences between the probability density functions are quantified by the so-called earth-mover's distance. We use this sensitivity analysis methodology to quantify the probability of occurrence of critical transitions and other long-term effects of agent adaptation. To test the potential of this new approach, it is used to analyse the resilience of an ABM of adaptive agents competing for a common-pool resource. Adaptation is shown to contribute positively to the resilience of this ABM. If adaptation proceeds sufficiently fast, it may delay or avert the collapse of this system.

  2. Characterizing bulk modulus of fine-grained subgrade soils under large capacity construction equipment

    CSIR Research Space (South Africa)

    Anochie-Boateng, Joseph

    2011-07-01

    Full Text Available laboratory testing program were used to determine bulk modulus at varying hydrostatic stress states, and moisture states chosen at optimum moisture content, 3% below and 3% above the optimum. The test results are analyzed, and used to develop regression...

  3. A model of psychological resilience for the Netherlands Armed Forces

    NARCIS (Netherlands)

    Kamphuis, W.; Venrooij, W.; Berg, C. van den

    2012-01-01

    In the current study, a model of psychological resilience was developed for the Netherlands Armed Forces and a number of important relations were tested using a longitudinal design. The model of resilience was based on a systematic literature review of resilience in high-risk professions and

  4. Pseudo-variables method to calculate HMA relaxation modulus through low-temperature induced stress and strain

    International Nuclear Information System (INIS)

    Canestrari, Francesco; Stimilli, Arianna; Bahia, Hussain U.; Virgili, Amedeo

    2015-01-01

    Highlights: • Proposal of a new method to analyze low-temperature cracking of bituminous mixtures. • Reliability of the relaxation modulus master curve modeling through Prony series. • Suitability of the pseudo-variables approach for a close form solution. - Abstract: Thermal cracking is a critical failure mode for asphalt pavements. Relaxation modulus is the major viscoelastic property that controls the development of thermally induced tensile stresses. Therefore, accurate determination of the relaxation modulus is fundamental for designing long lasting pavements. This paper proposes a reliable analytical solution for constructing the relaxation modulus master curve by measuring stress and strain thermally induced in asphalt mixtures. The solution, based on Boltzmann’s Superposition Principle and pseudo-variables concepts, accounts for time and temperature dependency of bituminous materials modulus, avoiding complex integral transformations. The applicability of the solution is demonstrated by testing a reference mixture using the Asphalt Thermal Cracking Analyzer (ATCA) device. By applying thermal loadings on restrained and unrestrained asphalt beams, ATCA allows the determination of several parameters, but is still unable to provide reliable estimations of relaxation properties. Without them the measurements from ATCA cannot be used in modeling of pavement behavior. Thus, the proposed solution successfully integrates ATCA experimental data. The same methodology can be applied to all test methods that concurrently measure stress and strain. The statistical parameters used to evaluate the goodness of fit show optimum correlation between theoretical and experimental results, demonstrating the accuracy of this mathematical approach

  5. Understanding Resilience

    Directory of Open Access Journals (Sweden)

    Gang eWu

    2013-02-01

    Full Text Available Resilience is the ability to adapt successfully in the face of stress and adversity. Stressful life events, trauma and chronic adversity can have a substantial impact on brain function and structure, and can result in the development of PTSD, depression and other psychiatric disorders. However, most individuals do not develop such illnesses after experiencing stressful life events, and are thus thought to be resilient. Resilience as successful adaptation relies on effective responses to environmental challenges and ultimate resistance to the deleterious effects of stress, therefore a greater understanding of the factors that promote such effects is of great relevance. This review focuses on recent findings regarding genetic, epigenetic, developmental, psychosocial and neurochemical factors that are considered essential contributors to the development of resilience. Neural circuits and pathways involved in mediating resilience are also discussed. The growing understanding of resilience factors will hopefully lead to the development of new pharmacological and psychological interventions for enhancing resilience and mitigating the untoward consequences.

  6. The Evaluation of the Initial Shear Modulus of Selected Cohesive Soils

    Science.gov (United States)

    Gabryś, Katarzyna; Szymański, Alojzy

    2015-06-01

    The paper concerns the evaluation of the initial stiffness of selected cohesive soils based on laboratory tests. The research materials used in this study were clayey soils taken from the area of the road embankment No. WD-18, on the 464th km of the S2 express-way, Konotopa-Airport route, Warsaw. The initial stiffness is represented here by the shear modulus (Gmax) determined during resonant column tests. In the article, a number of literature empirical formulas for defining initial value of the shear modulus of soils being examined were adopted from the literature in order to analyze the data set. However, a large discrepancy between laboratory test results and the values of Gmax calculated from empirical relationships resulted in the rejection of these proposals. They are inaccurate and do not allow for an exact evaluation of soil stiffness for selected cohesive soils. Hence, the authors proposed their own empirical formula that enables the evaluation of the test soils' Gmax in an easy and uncomplicated way. This unique formula describes mathematically the effect of certain soil parameters, namely mean effective stress ( p') and void ratio (e), on the initial soil stiffness.

  7. Influence of Selected Factors on the Relationship between the Dynamic Elastic Modulus and Compressive Strength of Concrete.

    Science.gov (United States)

    Jurowski, Krystian; Grzeszczyk, Stefania

    2018-03-22

    In this paper, the relationship between the static and dynamic elastic modulus of concrete and the relationship between the static elastic modulus and compressive strength of concrete have been formulated. These relationships are based on investigations of different types of concrete and take into account the type and amount of aggregate and binder used. The dynamic elastic modulus of concrete was tested using impulse excitation of vibration and the modal analysis method. This method could be used as a non-destructive way of estimating the compressive strength of concrete.

  8. Influence of Selected Factors on the Relationship between the Dynamic Elastic Modulus and Compressive Strength of Concrete

    Science.gov (United States)

    Jurowski, Krystian; Grzeszczyk, Stefania

    2018-01-01

    In this paper, the relationship between the static and dynamic elastic modulus of concrete and the relationship between the static elastic modulus and compressive strength of concrete have been formulated. These relationships are based on investigations of different types of concrete and take into account the type and amount of aggregate and binder used. The dynamic elastic modulus of concrete was tested using impulse excitation of vibration and the modal analysis method. This method could be used as a non-destructive way of estimating the compressive strength of concrete. PMID:29565830

  9. Structure and Young modulus of age hardening elinvar 45NKhT

    International Nuclear Information System (INIS)

    Baraz, V.R.; Strizhak, V.A.; Tsykin, D.N.

    1996-01-01

    The influence of quenching and ageing on structural features and Young modulus of precipitation hardening elinvar alloy 45 NKhT is under study. It is shown that the quenched alloy possesses a decreased elastic modulus which value drops with a quenching temperature increase. The ally ageing results in restoration of elastic modulus. The temperature range of Young modulus stability is shown to be independent of heat treatment conditions. The anomalies of elastic modulus in quenched alloy are conditioned by structural and magnetoelastic factors. The mechanisms of continuous and discontinuous precipitation mechanism has no effect on efficiency of Young modulus restoration. 13 refs., 6 figs

  10. The variation in elastic modulus throughout the compression of foam materials

    International Nuclear Information System (INIS)

    Sun, Yongle; Amirrasouli, B.; Razavi, S.B.; Li, Q.M.; Lowe, T.; Withers, P.J.

    2016-01-01

    We present a comprehensive experimental study of the variation in apparent unloading elastic modulus of polymer (largely elastic), aluminium (largely plastic) and fibre-reinforced cement (quasi-brittle) closed-cell foams throughout uniaxial compression. The results show a characteristic “zero-yield-stress” response and thereafter a rapid increase in unloading modulus during the supposedly “elastic” regime of the compressive stress–strain curve. The unloading modulus then falls with strain due to the localised cell-wall yielding or failure in the pre-collapse stage and the progressive cell crushing in the plateau stage, before rising sharply during the densification stage which is associated with global cell crushing and foam compaction. A finite element model based on the actual 3D cell structure of the aluminium foam imaged by X-ray computed tomography (CT) predicts an approximately linear fall of elastic modulus from zero strain until a band of collapsed cells forms. It shows that the subsequent gradual decrease in modulus is caused by the progressive collapse of cells. The elastic modulus rises sharply after the densification initiation strain has been reached. However, the elastic modulus is still well below that of the constituent material even when the “fully” dense state is approached. This work highlights the fact that the unloading elastic modulus varies throughout compression and challenges the idea that a constant elastic modulus can be applied in a homogenised foam model. It is suggested that the most representative value of elastic modulus may be obtained by extrapolating the measured unloading modulus to zero strain.

  11. Caregiver Resiliency.

    Science.gov (United States)

    Siebert, Al

    2002-01-01

    This article argues that school counselors cannot teach and preach resilient behavior if they are not models of resiliency themselves. Examines why some people come through challenging times more emotionally intact than others and suggests some tips for increasing one's resilience potential. (GCP)

  12. Resilience in Wives of persons with Alcoholism: An Indian exploration.

    Science.gov (United States)

    Johnson, Pradeep R; Britto, Carl; Sudevan, Kevin Jude; Bosco, Ashish; Sreedaran, Priya; Ashok, Mysore V

    2018-01-01

    Mental health has currently shifted focus from "deficit" to strength-based approaches such as Resilience. Coping styles and personality factors have been well studied in Wives of persons with Alcoholism (WopA) but not Resilience. Alcohol dependence in spouse is seen as an adversity. To evaluate Resilience in the WopA and explore its relationship with marital quality and clinical variables of Alcohol Dependence in their husbands. A cross-sectional study in a tertiary care hospital in Bangalore, Karnataka. WopA (n=34) between 25-55 years, were assessed for Resilience using Resilience Scale for Adults (RSA), while marital quality was assessed using Marital Quality Scale (MQS). The Severity of Alcohol Dependence, Age of onset of Initiation, Age of onset of Problem Drinking, and Age of onset of Dependence were evaluated in their husbands. Independent sample t -test, Chi-square test, and Pearson's correlation were used. Majority of the WopA (82%) scored low on the RSA. Low Resilience (LR) WopA scored significantly lower on all factors of RSA except the perception of future; in comparison to High Resilience (HR) WopA. Additionally, the LR WopA reported significantly poorer marital quality. Most WopA had low Resilience. LR WopA also had significantly poor marital quality. These findings need to be studied further in a larger population with culturally appropriate scales. The low scoring Resilience factors amongst WopA may be utilized in strength-based psychotherapeutic approaches. There is a need to improve the understanding of Resilience and its assessment in this population.

  13. Introduction of fracture resistance to the design and evaluation of open graded friction courses in Florida : final report, July 2009.

    Science.gov (United States)

    2009-07-01

    A dog-bone direct tension test (DBDT) to accurately determine tensile properties of asphalt concrete, : including OGFC, was conceived, developed and validated. Resilient modulus, creep, and strength tests : were performed at multiple temperatures on ...

  14. Resilience in a reborn nation: Validation of the Lithuanian Resilience Scale for Adults (RSA).

    Science.gov (United States)

    Hilbig, Jan; Viliūnienė, Rima; Friborg, Oddgeir; Pakalniškienė, Vilmantė; Danilevičiūtė, Vita

    2015-07-01

    Resilience, as an ability to withstand or rebound from crisis or adversity, is becoming an increasingly significant concept in health promotion and well-being. Individuals exhibiting resilience use skills or resources flexibly to solve situational demands. The Resilience Scale for Adults (RSA) may be used to assess protective resources, and the aim of the present study was to validate the Lithuanian translation. The translated RSA was administered to a clinical (n=125) and a non clinical sample (n=499) to examine the discriminant validity of the RSA items with a confirmatory factor analysis, the internal consistency as well as construct validity by correlating it with the Quick Psycho-Affective Symptoms Scan (QPASS). The internal consistency, the test-retest stability and the factor structure were replicated as adequate, thus indicating good psychometric properties and support of discriminant validity. Females reported more resilience resources for the domains of social competence, family cohesion and social resources compared to men. The RSA subscales correlated negatively with the QPASS scores, and patients reported significantly less resilience resources than non-patients, thus indicating construct validity. Valid psychometric tools for research purposes and routine every-day use are urgently needed in Lithuania, a young nation still under numerous challenges due to social, economic and political transitions. The RSA represents a reliable and valid tool for assessing protective factors. Assessing resilience factors may extend the understanding of factors relevant for mental health problems as well as treatment prognosis beyond the capabilities of mere symptom oriented approaches. Copyright © 2015 Elsevier Inc. All rights reserved.

  15. Young Modulus of Crystalline Polyethylene from ab Initio Molecular Dynamics

    NARCIS (Netherlands)

    Hageman, J.C.L.; Meier, Robert J.; Heinemann, M.; Groot, R.A. de

    1997-01-01

    The Young modulus for crystalline polyethylene is calculated using ab initio molecular dynamics based on density functional theory in the local density approximation (DFT-LDA). This modulus, which can be seen as the ultimate value for the Young modulus of polyethylene fibers, is found to be 334 GPa.

  16. Measuring resilience after spinal cord injury: Development, validation and psychometric characteristics of the SCI-QOL Resilience item bank and short form.

    Science.gov (United States)

    Victorson, David; Tulsky, David S; Kisala, Pamela A; Kalpakjian, Claire Z; Weiland, Brian; Choi, Seung W

    2015-05-01

    To describe the development and psychometric properties of the Spinal Cord Injury--Quality of Life (SCI-QOL) Resilience item bank and short form. Using a mixed-methods design, we developed and tested a resilience item bank through the use of focus groups with individuals with SCI and clinicians with expertise in SCI, cognitive interviews, and item-response theory based analytic approaches, including tests of model fit and differential item functioning (DIF). We tested a 32-item pool at several medical institutions across the United States, including the University of Michigan, Kessler Foundation, the Rehabilitation Institute of Chicago, the University of Washington, Craig Hospital and the James J. Peters/Bronx Department of Veterans Affairs medical center. A total of 717 individuals with SCI completed the Resilience items. A unidimensional model was observed (CFI=0.968; RMSEA=0.074) and measurement precision was good (theta range between -3.1 and 0.9). Ten items were flagged for DIF, however, after examination of effect sizes we found this to be negligible with little practical impact on score estimates. The final calibrated item bank resulted in 21 retained items. This study indicates that the SCI-QOL Resilience item bank represents a psychometrically robust measurement tool. Short form items are also suggested and computer adaptive tests are available.

  17. Resilience - A Concept

    Science.gov (United States)

    2016-04-05

    the assessment of the health of a network or system. The hypothesis is: resiliency is meaningful in the context of holistic assessments of... health , holistic , Resiliency Tier, Resiliency Tier Matrix, State of Resiliency 295Defense ARJ, July 2015, Vol. 22 No. 3 : 294–324 296 Defense ARJ, July...upon who is speaking. Taking this one step further, consider resiliency as a concept that provides a holistic view of a system or capability, just

  18. Multigene Genetic Programming for Estimation of Elastic Modulus of Concrete

    Directory of Open Access Journals (Sweden)

    Alireza Mohammadi Bayazidi

    2014-01-01

    Full Text Available This paper presents a new multigene genetic programming (MGGP approach for estimation of elastic modulus of concrete. The MGGP technique models the elastic modulus behavior by integrating the capabilities of standard genetic programming and classical regression. The main aim is to derive precise relationships between the tangent elastic moduli of normal and high strength concrete and the corresponding compressive strength values. Another important contribution of this study is to develop a generalized prediction model for the elastic moduli of both normal and high strength concrete. Numerous concrete compressive strength test results are obtained from the literature to develop the models. A comprehensive comparative study is conducted to verify the performance of the models. The proposed models perform superior to the existing traditional models, as well as those derived using other powerful soft computing tools.

  19. H.264/AVC error resilience tools suitable for 3G mobile video services

    Institute of Scientific and Technical Information of China (English)

    LIU Lin; YE Xiu-zi; ZHANG San-yuan; ZHANG Yin

    2005-01-01

    The emergence of third generation mobile system (3G) makes video transmission in wireless environment possible,and the latest 3GPP/3GPP2 standards require 3G terminals support H.264/AVC. Due to high packet loss rate in wireless environment, error resilience for 3G terminals is necessary. Moreover, because of the hardware restrictions, 3G mobile terminals support only part of H.264/AVC error resilience tool. This paper analyzes various error resilience tools and their functions, and presents 2 error resilience strategies for 3G mobile streaming video services and mobile conversational services. Performances of the proposed error resilience strategies were tested using off-line common test conditions. Experiments showed that the proposed error resilience strategies can yield reasonably satisfactory results.

  20. Temperature dependence of Young's modulus of silica refractories

    Czech Academy of Sciences Publication Activity Database

    Gregorová, E.; Černý, Martin; Pabst, W.; Esposito, L.; Zanelli, C.; Hamáček, J.; Kutzendorfer, J.

    2015-01-01

    Roč. 41, č. 1 (2015), s. 1129-1138 ISSN 0272-8842 Institutional support: RVO:67985891 Keywords : mechanical properties * elastic modulus (Young's modulus ) * SiO2 * Silica brick materials (cristobalite, tridymite) Subject RIV: JH - Ceramics, Fire-Resistant Materials and Glass Impact factor: 2.758, year: 2015

  1. Systemic resilience model

    International Nuclear Information System (INIS)

    Lundberg, Jonas; Johansson, Björn JE

    2015-01-01

    It has been realized that resilience as a concept involves several contradictory definitions, both for instance resilience as agile adjustment and as robust resistance to situations. Our analysis of resilience concepts and models suggest that beyond simplistic definitions, it is possible to draw up a systemic resilience model (SyRes) that maintains these opposing characteristics without contradiction. We outline six functions in a systemic model, drawing primarily on resilience engineering, and disaster response: anticipation, monitoring, response, recovery, learning, and self-monitoring. The model consists of four areas: Event-based constraints, Functional Dependencies, Adaptive Capacity and Strategy. The paper describes dependencies between constraints, functions and strategies. We argue that models such as SyRes should be useful both for envisioning new resilience methods and metrics, as well as for engineering and evaluating resilient systems. - Highlights: • The SyRes model resolves contradictions between previous resilience definitions. • SyRes is a core model for envisioning and evaluating resilience metrics and models. • SyRes describes six functions in a systemic model. • They are anticipation, monitoring, response, recovery, learning, self-monitoring. • The model describes dependencies between constraints, functions and strategies

  2. Soil behavior under earthquake loading conditions. In situ impulse test for determination of shear modulus for seismic response analyses. Progress report

    International Nuclear Information System (INIS)

    1974-06-01

    Progress is reported in the determination of the best methods of evaluation and prediction of soil behavior of potential nuclear power plant sites under seismic loading conditions. Results are reported of combined experimental and analytical studies undertaken to continue development of an in situ impulse test for determination of the soil shear modulus. Emphasis of the field work was directed toward making the field measurements at frequent depth intervals and at shear strains in the strong motion earthquake range. Emphasis of the analytical work was aimed toward supporting the field effort through processing and evaluation of the experimental test results combined with additional calculations required to gain insight into data interpretation and the in situ test setup itself. Continuing studies to evaluate free field soil behavior under earthquake loading conditions are discussed. (U.S.)

  3. Promoting Resiliency in Adolescent Girls through Adventure Programming

    Science.gov (United States)

    Whittington, Anja; Aspelmeier, Jeffery E.; Budbill, Nadine W.

    2016-01-01

    This study examined whether participation in an adventure program increased the resiliency of adolescent girls. Eighty-seven girls who participated in Dirt Divas, a non-profit, adventure program, completed the Resiliency Scale for Children and Adolescents® before and after their experience. Means-comparison tests for within-subjects designs were…

  4. A Fiber-Coupled Self-Mixing Laser Diode for the Measurement of Young’s Modulus

    Directory of Open Access Journals (Sweden)

    Ke Lin

    2016-06-01

    Full Text Available This paper presents the design of a fiber-coupled self-mixing laser diode (SMLD for non-contact and non-destructive measurement of Young’s modulus. By the presented measuring system, the Young’s modulus of aluminum 6061 and brass are measured as 70.0 GPa and 116.7 GPa, respectively, showing a good agreement within the standards in the literature and yielding a much smaller deviation and a higher repeatability compared with traditional tensile testing. Its fiber-coupled characteristics make the system quite easy to be installed in many application cases.

  5. Assessment of dynamic modulus of high density polypropylene waste fiber reinforcement in asphalt concrete

    Directory of Open Access Journals (Sweden)

    Hassan S. OTUOZE

    2015-12-01

    Full Text Available Traditional asphalt tests like Hveem and Marshall tests are at best mere characterization than effective test of pavement field performance because of complex viscoelastic behavior of asphalt. Mechanical properties otherwise called simple performance tests (SPT are performance criteria of asphalt. Dynamic modulus among other SPT’s like permanent deformation, fatigue cracking, thermal cracking, moisture susceptibility, shear and friction properties; determines stress-strain to time-temperature relationships that imparts on strength, service life and durability. The test followed the recommendations of NCHRP 1-37a (2004 and mixes were prepared using 0, 0.5, 1.0 and 1.5% HDPP contents. The parameters tested for dynamic modulus, /E*/, are stiffness, recoverable strain (ε, and phase angle (ξ. Time – temperature superposition (TTS called master curve was fitted using sigmoidal curve to interpolate the parameters beyond measured data set so as to observe the viscoelastic behavior outside the physical properties. The performance of 0.5% HDPP asphalt is better enhanced than the conventional asphalt to improve upon strength, service and durability.

  6. On Young's modulus of multi-walled carbon nanotubes

    Indian Academy of Sciences (India)

    WINTEC

    load transfer in nanocomposites. In the present work, CNT/Al ... calculations. The theoretical modulus of the graphene sheet is supposed to be 1060 GPa (Harris 2004). The reason why multi-walled nanotubes have a modulus > 1060 GPa (that of graphene sheet) is currently not understood. However, in the present paper, ...

  7. Use of an ultrasonic device for the determination of elastic modulus of dentin.

    Science.gov (United States)

    Miyazaki, Masashi; Inage, Hirohiko; Onose, Hideo

    2002-03-01

    The mechanical properties of dentin substrate are one of the important factors in determining bond strength of dentin bonding systems. The purpose of this study was to determine the elastic modulus of dentin substrate with the use of an ultrasonic device. The dentin disks of about 1 mm thickness were obtaining from freshly extracted human third molars, and the dentin disk was shaped in a rectangular form with a line diamond point. The size and weight of each specimen was measured to calculate the density of the specimen. The ultrasonic equipment employed in this study was composed of a Pulser-Receiver (Model 5900PR, Panametrics), transducers (V155, V156, Panametrics) and an oscilloscope. The measured two-way transit time through the dentin disk was divided by two to account for the down-and-back travel path, and then multiplied by the velocity of sound in the test material. Measuring the longitudinal and share wave sound velocity determine elastic modulus. The mean elastic modulus of horizontally sectioned specimens was 21.8 GPa and 18.5 GPa for the vertically sectioned specimens, and a significant difference was found between the two groups. The ultrasonic method used in this study shows considerable promise for determination of the elastic modulus of the tooth substrate.

  8. Resilient leadership and the organizational culture of resilience: construct validation.

    Science.gov (United States)

    Everly, George S; Smith, Kenneth J; Lobo, Rachel

    2013-01-01

    Political, economic, and social unrest and uncertainty seem replete throughout the world. Within the United States, political vitriol and economic volatility have led to severe economic restrictions. Both government and private sector organizations are being asked to do more with less. The specter of dramatic changes in healthcare creates a condition of uncertainty affecting budget allocations and hiring practices. If ever there was a time when a "resilient culture" was needed, it is now. In this paper we shall discuss the application of "tipping point" theory (Gladwell, 2000) operationalized through a special form of leadership: "resilient leadership" (Everly, Strouse, Everly, 2010). Resilient leadership is consistent with Gladwells "Law of the Few" and strives to create an organizational culture of resilience by implementing an initial change within no more than 20% of an organization's workforce. It is expected that such a minority, if chosen correctly, will "tip" the rest of the organization toward enhanced resilience, ideally creating a self-sustaining culture of resilience. This paper reports on the empirical foundations and construct validation of "resilient leadership".

  9. Resilience

    Science.gov (United States)

    Resilience is an important framework for understanding and managing complex systems of people and nature that are subject to abrupt and nonlinear change. The idea of ecological resilience was slow to gain acceptance in the scientific community, taking thirty years to become widel...

  10. Relationships Between Stress, Negative Emotions, Resilience, and Smoking: Testing a Moderated Mediation Model.

    Science.gov (United States)

    Wang, Yan; Chen, Xinguang; Gong, Jie; Yan, Yaqiong

    2016-01-01

    More effective tobacco prevention and cessation programs require in-depth understanding of the mechanism by which multiple factors interact with each other to affect smoking behaviors. Stress has long been recognized as a risk factor for smoking. However, the underlying mediation and moderation mechanisms are far from clear. The purpose of this study was to examine the role of negative emotions in mediating the link between stress and smoking and whether this indirect link was modified by resilience. Survey data were collected using audio computer-assisted self-interview (ACASI) from a large random sample of urban residents (n = 1249, mean age = 35.1, 45.3% male) in Wuhan, China. Perceived stress, negative emotions (anxiety, depression), resilience were measured with reliable instruments also validated in China. Self-reported smoking was validated with exhaled carbon monoxide. Mediation analysis indicated that two negative emotions fully mediated the link between stress and intensity of smoking (assessed by number of cigarettes smoked per day, effect =.082 for anxiety and.083 for depression) and nicotine dependence (assessed by DSM-IV standard, effect =.134 for anxiety and.207 for depression). Moderated mediation analysis demonstrated that the mediation effects of negative emotions were negatively associated with resilience. Results suggest resilience interacts with stress and negative emotions to affect the risk of tobacco use and nicotine dependence among Chinese adults. Further research with longitudinal data is needed to verify the findings of this study and to estimate the effect size of resilience in tobacco intervention and cessation programs.

  11. Mechanical evaluation of quad-helix appliance made of low-nickel stainless steel wire.

    Science.gov (United States)

    dos Santos, Rogério Lacerda; Pithon, Matheus Melo

    2013-01-01

    The objective of this study was to test the hypothesis that there is no difference between stainless steel and low-nickel stainless steel wires as regards mechanical behavior. Force, resilience, and elastic modulus produced by Quad-helix appliances made of 0.032-inch and 0.036-inch wires were evaluated. Sixty Quad-helix appliances were made, thirty for each type of alloy, being fifteen for each wire thickness, 0.032-in and 0.036-in. All the archwires were submitted to mechanical compression test using an EMIC DL-10000 machine simulating activations of 4, 6, 9, and 12 mm. Analysis of variance (ANOVA) with multiple comparisons and Tukey's test were used (p nickel stainless steel alloy had force, resilience, and elastic modulus similar to those made of stainless steel alloy.

  12. Developing the resilience typology

    DEFF Research Database (Denmark)

    Simonsen, Daniel Morten

    2013-01-01

    There is a growing interest in resilience in internal crisis management and crisis communication. How an organization can build up resilience as a response to organisational crisis, at a time when the amount of crises seem only to increase, is more relevant than ever before. Nevertheless resilience...... is often perceived in the literature as something certain organisations have by definition, without further reflection on what it is that creates this resiliency. This article explores what it is that creates organisational resilience, and in view of the different understandings of the resilience...... phenomenon, develops a typology of resilience. Furthermore the resilience phenomenon is discussed against the definition of a crisis as a cosmological episode, and implications for future research is discussed and summarized....

  13. Comparison of Elastic Modulus and Compressive Strength of Ariadent and Harvard Polycarboxylate Cement and Vitremer Resin Modified Glass Ionomer

    Directory of Open Access Journals (Sweden)

    Ahmadian Khoshemehr Leila

    2009-09-01

    Full Text Available Background: Luting agents are used to attach indirect restoration into or on the tooth. Poor mechanical properties of cement may be a cause of fracture of this layer and lead to caries and restoration removal. The purpose of this study was to compare the elastic modulus and compressive strength of Ariadent (A Poly and Harvard polycarboxylate (H Poly cements and Vitremer resin modified glass ionomer (RGl.Materials & Methods: In this experimental study 15 specimens were prepared form each experimental cement in Laboratory of Tehran Oil Refining Company. The cylindrical specimens were compressed in Instron machine after 24 hours. Elastic modulus and compressive strength were calculated from stress/strain curve of each specimen. One way ANOVA and Tukey tests were used for statistical analysis and P values<0.05 were considered to be statistically significant.Results: The mean elastic modulus and mean compressive strength were 2.2 GPa and 87.8MPa in H poly, 2.4 GPa and 56.5 MPa in A Poly, and 0.8GPa and 105.6 MPa in RGI, respectively. Statistical analysis showed that compressive strength and elastic modulus of both polycarboxylate cements were significantly different from hybrid ionomer (P<0.05, but the difference between elastic modulus of two types of polycarboxilate cements was not statistically significant. Compressive strength of two polycarboxilate cements were significantly different (P<0.05. Conclusion: An ideal lutting agent must have the best mechanical properties. Between the tested luttins RGl cement had the lowest elastic modulus and the highest compressive strength, but the A poly cement had the highest elastic modulus and the lowest compressive strength. Therefore none of them was the best.

  14. Frequency-dependent complex modulus of the uterus: preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Kiss, Miklos Z [Department of Medical Physics, University of Wisconsin, Madison, WI 53706 (United States); Hobson, Maritza A [Department of Medical Physics, University of Wisconsin, Madison, WI 53706 (United States); Varghese, Tomy [Department of Medical Physics, University of Wisconsin, Madison, WI 53706 (United States); Harter, Josephine [Department of Surgical Pathology, University of Wisconsin, Madison, WI 53706 (United States); Kliewer, Mark A [Department of Radiology, University of Wisconsin, Madison, WI 53706 (United States); Hartenbach, Ellen M [Department of Obstetrics and Gynecology, University of Wisconsin, Madison, WI 53706 (United States); Zagzebski, James A [Department of Medical Physics, University of Wisconsin, Madison, WI 53706 (United States)

    2006-08-07

    The frequency-dependent complex moduli of human uterine tissue have been characterized. Quantification of the modulus is required for developing uterine ultrasound elastography as a viable imaging modality for diagnosing and monitoring causes for abnormal uterine bleeding and enlargement, as well assessing the integrity of uterine and cervical tissue. The complex modulus was measured in samples from hysterectomies of 24 patients ranging in age from 31 to 79 years. Measurements were done under small compressions of either 1 or 2%, at low pre-compression values (either 1 or 2%), and over a frequency range of 0.1-100 Hz. Modulus values of cervical tissue monotonically increased from approximately 30-90 kPa over the frequency range. Normal uterine tissue possessed modulus values over the same range, while leiomyomas, or uterine fibroids, exhibited values ranging from approximately 60-220 kPa.

  15. Frequency-dependent complex modulus of the uterus: preliminary results

    International Nuclear Information System (INIS)

    Kiss, Miklos Z; Hobson, Maritza A; Varghese, Tomy; Harter, Josephine; Kliewer, Mark A; Hartenbach, Ellen M; Zagzebski, James A

    2006-01-01

    The frequency-dependent complex moduli of human uterine tissue have been characterized. Quantification of the modulus is required for developing uterine ultrasound elastography as a viable imaging modality for diagnosing and monitoring causes for abnormal uterine bleeding and enlargement, as well assessing the integrity of uterine and cervical tissue. The complex modulus was measured in samples from hysterectomies of 24 patients ranging in age from 31 to 79 years. Measurements were done under small compressions of either 1 or 2%, at low pre-compression values (either 1 or 2%), and over a frequency range of 0.1-100 Hz. Modulus values of cervical tissue monotonically increased from approximately 30-90 kPa over the frequency range. Normal uterine tissue possessed modulus values over the same range, while leiomyomas, or uterine fibroids, exhibited values ranging from approximately 60-220 kPa

  16. An enhanced method to determine the Young’s modulus of technical single fibres by means of high resolution digital image correlation

    Science.gov (United States)

    Huether, Jonas; Rupp, Peter; Kohlschreiber, Ina; André Weidenmann, Kay

    2018-04-01

    To obtain mechanical tensile properties of materials it is customary to equip the specimen directly with a device to measure strain and Young’s modulus correctly and only within the measuring length defined by the standards. Whereas a variety of tools such as extensometers, strain gauges and optical systems are available for specimens on coupon level, no market-ready tools to measure strains of single fibres during single fibre tensile tests are available. Although there is a standard for single fibre testing, the procedures described there are only capable of measuring strains of the whole testing setup rather than the strain of the fibre. Without a direct strain measurement on the specimen, the compliance of the test rig itself influences the determination of the Young’s modulus. This work aims to fill this gap by establishing an enhanced method to measure strains directly on the tested fibre and thus provide accurate values for Young’s modulus. It is demonstrated that by applying and then optically tracking fluorescing polymeric beads on single glass fibres, Young’s modulus is determined directly and with high repeatability, without a need to measure at different measuring lengths or compensating for the system compliance. Employing this method to glass fibres, a Young’s modulus of approximately 82.5 GPa was determined, which is in the range of values obtained by applying a conventional procedure. This enhanced measuring technology achieves high accuracy and repeatability while reducing scatter of the data. It was demonstrated that the fluorescing beads do not affect the fibre properties.

  17. Plant Responses to Extreme Climatic Events: A Field Test of Resilience Capacity at the Southern Range Edge

    Science.gov (United States)

    Herrero, Asier; Zamora, Regino

    2014-01-01

    The expected and already observed increment in frequency of extreme climatic events may result in severe vegetation shifts. However, stabilizing mechanisms promoting community resilience can buffer the lasting impact of extreme events. The present work analyzes the resilience of a Mediterranean mountain ecosystem after an extreme drought in 2005, examining shoot-growth and needle-length resistance and resilience of dominant tree and shrub species (Pinus sylvestris vs Juniperus communis, and P. nigra vs J. oxycedrus) in two contrasting altitudinal ranges. Recorded high vegetative-resilience values indicate great tolerance to extreme droughts for the dominant species of pine-juniper woodlands. Observed tolerance could act as a stabilizing mechanism in rear range edges, such as the Mediterranean basin, where extreme events are predicted to be more detrimental and recurrent. However, resistance and resilience components vary across species, sites, and ontogenetic states: adult Pinus showed higher growth resistance than did adult Juniperus; saplings displayed higher recovery rates than did conspecific adults; and P. nigra saplings displayed higher resilience than did P. sylvestris saplings where the two species coexist. P. nigra and J. oxycedrus saplings at high and low elevations, respectively, were the most resilient at all the locations studied. Under recurrent extreme droughts, these species-specific differences in resistance and resilience could promote changes in vegetation structure and composition, even in areas with high tolerance to dry conditions. PMID:24489971

  18. Plant responses to extreme climatic events: a field test of resilience capacity at the southern range edge.

    Directory of Open Access Journals (Sweden)

    Asier Herrero

    Full Text Available The expected and already observed increment in frequency of extreme climatic events may result in severe vegetation shifts. However, stabilizing mechanisms promoting community resilience can buffer the lasting impact of extreme events. The present work analyzes the resilience of a Mediterranean mountain ecosystem after an extreme drought in 2005, examining shoot-growth and needle-length resistance and resilience of dominant tree and shrub species (Pinus sylvestris vs Juniperus communis, and P. nigra vs J. oxycedrus in two contrasting altitudinal ranges. Recorded high vegetative-resilience values indicate great tolerance to extreme droughts for the dominant species of pine-juniper woodlands. Observed tolerance could act as a stabilizing mechanism in rear range edges, such as the Mediterranean basin, where extreme events are predicted to be more detrimental and recurrent. However, resistance and resilience components vary across species, sites, and ontogenetic states: adult Pinus showed higher growth resistance than did adult Juniperus; saplings displayed higher recovery rates than did conspecific adults; and P. nigra saplings displayed higher resilience than did P. sylvestris saplings where the two species coexist. P. nigra and J. oxycedrus saplings at high and low elevations, respectively, were the most resilient at all the locations studied. Under recurrent extreme droughts, these species-specific differences in resistance and resilience could promote changes in vegetation structure and composition, even in areas with high tolerance to dry conditions.

  19. 'Resilience thinking' in transport planning

    OpenAIRE

    Wang, JYT

    2015-01-01

    Resilience has been discussed in ecology for over forty years. While some aspects of resilience have received attention in transport planning, there is no unified definition of resilience in transportation. To define resilience in transportation, I trace back to the origin of resilience in ecology with a view of revealing the essence of resilience thinking and its relevance to transport planning. Based on the fundamental concepts of engineering resilience and ecological resilience, I define "...

  20. Enhancement and prediction of modulus of elasticity of palm kernel shell concrete

    International Nuclear Information System (INIS)

    Alengaram, U. Johnson; Mahmud, Hilmi; Jumaat, Mohd Zamin

    2011-01-01

    Research highlights: → Micro-pores of size 16-24 μm were found on the outer surface of palm kernel shell. → Infilling of pores by mineral admixtures was evident. → Sand content influenced both modulus of elasticity and compressive strength. → Proposed equation predicts modulus of elasticity within ±1.5 kN/mm 2 of test results. -- Abstract: This paper presents results of an investigation conducted to enhance and predict the modulus of elasticity (MOE) of palm kernel shell concrete (PKSC). Scanning electron microscopic (SEM) analysis on palm kernel shell (PKS) was conducted. Further, the effect of varying sand and PKS contents and mineral admixtures (silica fume and fly ash) on compressive strength and MOE was investigated. The variables include water-to-binder (w/b) and sand-to-cement (s/c) ratios. Nine concrete mixes were prepared, and tests on static and dynamic moduli of elasticity and compressive strength were conducted. The SEM result showed presence of large number of micro-pores on PKS. The mineral admixtures uniformly filled the micro-pores on the outer surface of PKS. Further, the increase in sand content coupled with reduction in PKS content enhanced the compressive strength and static MOE: The highest MOE recorded in this investigation, 11 kN/mm 2 , was twice that previously published. Moreover, the proposed equation based on CEB/FIP code formula appears to predict the MOE close to the experimental values.

  1. Four concepts for resilience and the implications for the future of resilience engineering

    International Nuclear Information System (INIS)

    Woods, David D.

    2015-01-01

    The concept of system resilience is important and popular—in fact, hyper-popular over the last few years. Clarifying the technical meanings and foundations of the concept of resilience would appear to be necessary. Proposals for defining resilience are flourishing as well. This paper organizes the different technical approaches to the question of what is resilience and how to engineer it in complex adaptive systems. This paper groups the different uses of the label ‘resilience’ around four basic concepts: (1) resilience as rebound from trauma and return to equilibrium; (2) resilience as a synonym for robustness; (3) resilience as the opposite of brittleness, i.e., as graceful extensibility when surprise challenges boundaries; (4) resilience as network architectures that can sustain the ability to adapt to future surprises as conditions evolve. - Highlights: • There continues to be a wide diversity of definitions of the label resilience. • Research progress points to 4 basic concepts underneath diverse uses of. • Each of the four core concepts defines different research agendas. • The 4 concepts provide guides on how to engineer resilience for safety

  2. Conceptualizing Resilience

    Directory of Open Access Journals (Sweden)

    Thomas A. Birkland

    2016-12-01

    Full Text Available This commentary provides an overview of the idea of resilience, and acknowledges the challenges of defining and applying the idea in practice. The article summarizes a way of looking at resilience called a “resilience delta”, that takes into account both the shock done to a community by a disaster and the capacity of that community to rebound from that shock to return to its prior functionality. I show how different features of the community can create resilience, and consider how the developed and developing world addresses resilience. I also consider the role of focusing events in gaining attention to events and promoting change. I note that, while focusing events are considered by many in the disaster studies field to be major drivers of policy change in the United States disaster policy, most disasters have little effect on the overall doctrine of shared responsibilities between the national and subnational governments.

  3. IMPACT OF THERMAL FATIGUE ON YOUNG’S MODULUS OF EPOXY ADHESIVES

    Directory of Open Access Journals (Sweden)

    Mariusz Kłonica

    2015-11-01

    Full Text Available The following paper presents a comparative analysis of two epoxy-based adhesives: Hysol 9466 and Hysol 3421, prior to and after thermal shock testing. The tests focused on determining Young’s modulus. Epoxy-based materials are among the most widespread adhesive materials used as universal structural adhesives. The prepared epoxy samples (Hysol 9466 and Hysol 3421 were subjected to thermal shock cycling tests, according to a specified programme, in a thermal shock testing chamber, at a temperature range –40 °C to +60 °C and in the number of 200 cycles. Conclusions from the tests are presented at the final stage of the paper.

  4. In vivo performance of a reduced-modulus bone cement

    Science.gov (United States)

    Forehand, Brett Ramsey

    Total joint replacement has become one of the most common procedures in the area of orthopedics and is often the solution in patients with diseased or injured hip joints. Component loosening is a significant problem and is primarily caused by bone resorption at the bone-cement interface in cemented implants. It is our hypothesis that localized shear stresses are responsible for the resorption. It was previously shown analytically that local stresses at the interface could be reduced by using a cement of lower modulus. A new reduced modulus cement, polybutyl methylmethacrylate (PBMMA), was developed to test the hypothesis. PBMMA was formulated to exist as polybutyl methacrylate filler in a polymethyl methacrylate matrix. The success of PBMMA cement is based largely on the fact that the polybutyl component of the cement will be in the rubbery state at body temperature. In vitro characterization of the cement was undertaken previously and demonstrated a modulus of approximately one-eighth that of conventional bone cement, polymethyl methacrylate (PMMA) and increased fracture toughness. The purpose of this experiment was to perform an in vivo comparison of the two cements. A sheep model was selected. Total hip arthroplasty was performed on 50 ewes using either PBMMA or PMMA. Radiographs were taken at 6 month intervals. At one year, the contralateral femur of each sheep was implanted so that each animal served as its own control, and the animals were sacrificed. The stiffness of the bone-cement interface of the femoral component within the femur was assessed by applying a torque to the femoral component and demonstrated a significant difference in loosening between the cements when the specimens were tested in external rotation (p sheep had a greater amount of loosening for each subject, 59% versus 4% for standard PMMA. A radiographic analysis demonstrated more signs of loosening in the PMMA series of subjects. A brief histological examination showed similar bony

  5. Young's modulus of individual ZnO nanowires

    International Nuclear Information System (INIS)

    Jiang, Dayong; Tian, Chunguang; Liu, Qingfei; Zhao, Man; Qin, Jieming; Hou, Jianhua; Gao, Shang; Liang, Qingcheng; Zhao, Jianxun

    2014-01-01

    We used a contact-mode atomic force microscopy (AFM) to study the mechanical properties of an individual ZnO nanowire in the open air. It is noteworthy that the Young's modulus can be determined by an AFM tip compressing a single nanowire on a rigid substrate, which can bring more repeatability and accuracy for the measurements. In particular, the calculated radial Young's modulus of ZnO nanowires is consistent with the data of ZnO bulks and thin films. We also present the Young's modulus with different diameters, and all these are discussed deeply

  6. Integrated Approach to a Resilient City: Associating Social, Environmental and Infrastructure Resilience in its Whole

    Directory of Open Access Journals (Sweden)

    Birutė PITRĖNAITĖ-ŽILĖNIENĖ

    2014-12-01

    Full Text Available Rising complexity, numbers and severity of natural and manmade disasters enhance the importance of reducing vulnerability, or on contrary – increasing resilience, of different kind of systems, including those of social, engineering (infrastructure, and environmental (ecological nature. The goal of this research is to explore urban resilience as an integral system of social, environmental, and engineering resilience. This report analyses the concepts of each kind of resilience and identifies key factors influencing social, ecological, and infrastructure resilience discussing how these factors relate within urban systems. The achievement of resilience of urban and regional systems happens through the interaction of the different elements (social, psychological, physical, structural, and environmental, etc.; therefore, resilient city could be determined by synergy of resilient society, resilient infrastructure and resilient environment of the given area. Based on literature analysis, the current research provides some insights on conceptual framework for assessment of complex urban systems in terms of resilience. To be able to evaluate resilience and define effective measures for prevention and risk mitigation, and thereby strengthen resilience, we propose to develop an e-platform, joining risk parameters’ Monitoring Systems, which feed with data Resiliency Index calculation domain. Both these elements result in Multirisk Platform, which could serve for awareness and shared decision making for resilient people in resilient city.

  7. Quantifying resilience for resilience engineering of socio technical systems

    OpenAIRE

    Häring, Ivo; Ebenhöch, Stefan; Stolz, Alexander

    2016-01-01

    Resilience engineering can be defined to comprise originally technical, engineering and natural science approaches to improve the resilience and sustainability of socio technical cyber-physical systems of various complexities with respect to disruptive events. It is argued how this emerging interdisciplinary technical and societal science approach may contribute to civil and societal security research. In this context, the article lists expected benefits of quantifying resilience. Along the r...

  8. Indentation modulus and hardness of viscoelastic thin films by atomic force microscopy: A case study

    International Nuclear Information System (INIS)

    Passeri, D.; Bettucci, A.; Biagioni, A.; Rossi, M.; Alippi, A.; Tamburri, E.; Lucci, M.; Davoli, I.; Berezina, S.

    2009-01-01

    We propose a nanoindentation technique based on atomic force microscopy (AFM) that allows one to deduce both indentation modulus and hardness of viscoelastic materials from the force versus penetration depth dependence, obtained by recording the AFM cantilever deflection as a function of the sample vertical displacement when the tip is pressed against (loading phase) and then removed from (unloading phase) the surface of the sample. Reliable quantitative measurements of both indentation modulus and hardness of the investigated sample are obtained by calibrating the technique through a set of different polymeric samples, used as reference materials, whose mechanical properties have been previously determined by standard indentation tests. By analyzing the dependence of the cantilever deflection versus time, the proposed technique allows one to evaluate and correct the effect of viscoelastic properties of the investigated materials, by adapting a post-experiment data processing procedure well-established for standard depth sensing indentation tests. The technique is described in the case of the measurement of indentation modulus and hardness of a thin film of poly(3,4-ethylenedioxythiophene) doped with poly(4-styrenesulfonate), deposited by chronoamperometry on an indium tin oxide (ITO) substrate.

  9. Indentation modulus and hardness of viscoelastic thin films by atomic force microscopy: A case study

    Energy Technology Data Exchange (ETDEWEB)

    Passeri, D., E-mail: daniele.passeri@uniroma1.it [Dipartimento di Energetica, Universita di Roma ' La Sapienza' , Via A. Scarpa 16, 00161 Roma (Italy); Bettucci, A.; Biagioni, A.; Rossi, M.; Alippi, A. [Dipartimento di Energetica, Universita di Roma ' La Sapienza' , Via A. Scarpa 16, 00161 Roma (Italy); Tamburri, E. [Dipartimento di Scienze e Tecnologie Chimiche, Universita di Roma ' Tor Vergata' , Via della Ricerca Scientifica, 00133 Roma (Italy); Lucci, M.; Davoli, I. [Dipartimento di Fisica, Universita di Roma ' Tor Vergata' , Via della Ricerca Scientifica, 00133 Roma (Italy); Berezina, S. [Department of Physics, University of Zilina, 01026, Univerzitna 1 Zilina (Slovakia)

    2009-11-15

    We propose a nanoindentation technique based on atomic force microscopy (AFM) that allows one to deduce both indentation modulus and hardness of viscoelastic materials from the force versus penetration depth dependence, obtained by recording the AFM cantilever deflection as a function of the sample vertical displacement when the tip is pressed against (loading phase) and then removed from (unloading phase) the surface of the sample. Reliable quantitative measurements of both indentation modulus and hardness of the investigated sample are obtained by calibrating the technique through a set of different polymeric samples, used as reference materials, whose mechanical properties have been previously determined by standard indentation tests. By analyzing the dependence of the cantilever deflection versus time, the proposed technique allows one to evaluate and correct the effect of viscoelastic properties of the investigated materials, by adapting a post-experiment data processing procedure well-established for standard depth sensing indentation tests. The technique is described in the case of the measurement of indentation modulus and hardness of a thin film of poly(3,4-ethylenedioxythiophene) doped with poly(4-styrenesulfonate), deposited by chronoamperometry on an indium tin oxide (ITO) substrate.

  10. Resilience: Theory and Application.

    Energy Technology Data Exchange (ETDEWEB)

    Carlson, J.L.; Haffenden, R.A.; Bassett, G.W.; Buehring, W.A.; Collins, M.J., III; Folga, S.M.; Petit, F.D.; Phillips, J.A.; Verner, D.R.; Whitfield, R.G. (Decision and Information Sciences)

    2012-02-03

    There is strong agreement among policymakers, practitioners, and academic researchers that the concept of resilience must play a major role in assessing the extent to which various entities - critical infrastructure owners and operators, communities, regions, and the Nation - are prepared to respond to and recover from the full range of threats they face. Despite this agreement, consensus regarding important issues, such as how resilience should be defined, assessed, and measured, is lacking. The analysis presented here is part of a broader research effort to develop and implement assessments of resilience at the asset/facility and community/regional levels. The literature contains various definitions of resilience. Some studies have defined resilience as the ability of an entity to recover, or 'bounce back,' from the adverse effects of a natural or manmade threat. Such a definition assumes that actions taken prior to the occurrence of an adverse event - actions typically associated with resistance and anticipation - are not properly included as determinants of resilience. Other analyses, in contrast, include one or more of these actions in their definitions. To accommodate these different definitions, we recognize a subset of resistance- and anticipation-related actions that are taken based on the assumption that an adverse event is going to occur. Such actions are in the domain of resilience because they reduce both the immediate and longer-term adverse consequences that result from an adverse event. Recognizing resistance- and anticipation-related actions that take the adverse event as a given accommodates the set of resilience-related actions in a clear-cut manner. With these considerations in mind, resilience can be defined as: 'the ability of an entity - e.g., asset, organization, community, region - to anticipate, resist, absorb, respond to, adapt to, and recover from a disturbance.' Because critical infrastructure resilience is important

  11. Resiliency as a component importance measure in network reliability

    International Nuclear Information System (INIS)

    Whitson, John C.; Ramirez-Marquez, Jose Emmanuel

    2009-01-01

    This paper seeks to define the concept of resiliency as a component importance measure related to network reliability. Resiliency can be defined as a composite of: (1) the ability of a network to provide service despite external failures and (2) the time to restore service when in the presence of such failures. Although, Resiliency has been extensively studied in different research areas, this paper will study the specific aspects of quantifiable network resiliency when the network is experiencing potential catastrophic failures from external events and/or influences, and when it is not known a priori which specific components within the network will fail. A formal definition for Category I resiliency is proposed and a step-by-step approach based on Monte-Carlo simulation to calculate it is defined. To illustrate the approach, two-terminal networks with varying degrees of redundancy, have been considered. The results obtained for test networks show that this new quantifiable concept of resiliency provides insight into the performance and topology of the network. Future use for this work could include methods for safeguarding critical network components and optimizing the use of redundancy as a technique to improve network resiliency.

  12. Resilience among refugees: a case of Zimbabwean refugee children ...

    African Journals Online (AJOL)

    Refugee learners face traumatising post-migration experiences in South Africa. Their resilience is tested in all spheres – communities which they settle, schools they go to and places they try to get social services. The purpose of this study is to explore post-migration experiences which gave rise to resilience among ...

  13. Framing resilience: social uncertainty in designing urban climate resilience

    OpenAIRE

    Wardekker, J.A.

    2016-01-01

    Building urban resilience to climate change and other challenges will be essential for maintaining thriving cities into the future. Resilience has become very popular in both research on and practice of climate adaptation. However, people have different interpretations of what it means: what resilience-building contributes to, what the problems, causes and solutions are, and what trade-offs, side-effects and other normative choices are acceptable. These different ways of ‘framing’ climate res...

  14. Regional variation in wood modulus of elasticity (stiffness) and modulus of rupture (strength) of planted loblolly pine in the United States

    Science.gov (United States)

    Antony Finto; Lewis Jordan; Laurence R. Schimleck; Alexander Clark; Ray A. Souter; Richard F. Daniels

    2011-01-01

    Modulus of elasticity (MOE), modulus of rupture (MOR), and specific gravity (SG) are important properties for determining the end-use and value of a piece of lumber. This study addressed the variation in MOE, MOR, and SG with physiographic region, tree height, and wood type. Properties were measured from two static bending samples (dimensions 25.4 mm × 25.4 mm × 406.4...

  15. The influence of daily stress and resilience on successful ageing.

    Science.gov (United States)

    Byun, J; Jung, D

    2016-09-01

    The aim of this study was to identify the effects of daily stress and resilience on successful ageing among community-dwelling older adults. Ageing can be a positive experience if there is good adaptation to ageing processes. Positive ageing needs to be a basis of nursing care, health promotion and education within community settings. Data were collected in March and April of 2014 from 262 older adults living in Seoul and Jeju, South Korea. We used a four-part survey consisting of demographic data, daily stress, resilience and successful ageing scales, in total 91 items. Data were analysed using descriptive statistics, t-test, one-way ANOVA, Tukey HSD test, Pearson's correlation coefficient and hierarchical multiple regression analysis to identify the influence of variables on successful ageing. Successful ageing had a significant negative correlation with daily stress and a positive correlation with resilience. Daily stress had a negative correlation with resilience. Findings of hierarchical multiple regression analysis indicated that resilience and subjective economic status had an effect on successful ageing. Furthermore, these variables accounted for 41.6% of the variance in successful ageing. Data were collected in only two cities of Korea based on convenience sampling. The findings of the study suggest that daily stress and resilience have a statistically significant relationship with successful ageing. Furthermore, resilience is an important influential factor and a much-needed personal characteristic for one's successful ageing. Nurses can advocate joining with health and social policy makers to implement policies on healthy ageing, including evaluation of stress, education programmes and implementation of self-help groups to enhance resilience in older people. © 2016 International Council of Nurses.

  16. Relationship Between Resilience and Quality of Life in Diabetics

    International Nuclear Information System (INIS)

    Nawaz, A.; Malik, J. A.; Batool, A.

    2014-01-01

    Objective: To determine the relationship between resilience and quality of life of diabetes patients controlling the effect of personal level (i.e., gender, age, and income) and disease-specific (i.e., duration of disease, and current glucose level) demographics. Study Design: Analytical study. Place and Duration of Study: Outpatient Departments of various hospitals in Islamabad and Rawalpindi, from October to November 2012. Methodology: Patients diagnosed with diabetes taking treatment in an outdoor patients facility were included. Patients with a major diabetes complications causing or coexistent with a physical disability, medical condition or psychiatric comorbidity were excluded. Informed consent was taken from patients before administration of questionnaires. The patients were asked to respond to a demographic sheet, State-Trait resilience inventory, and WHO-Quality of Life BREF. Statistical testing was conducting using bivariate correlation, Mann-Whitney U-test, and multiple linear regression analysis for moderation testing. Results: There were 242 patients including (n=108, 44% females; and n=134, 56% males) aged 17 - 85 years with mean of 44.56 +- 16.56 years. Trait resilience predicted all aspects of quality of life of diabetic patients (b range = 0.30 to 0.42, p < .01) and explained 17% variance in physical functioning, 29% in psychological functioning, 17% in environmental functioning, 30% in social dimension, and 29% in overall quality of life. Duration of diabetes moderated effect of state resilience on all aspects of quality of life (b interaction range = 0.20 to 0.26, p < .05) and explained an additional 4% variance in physical functioning, 5% in psychological functioning, 3% in environmental functioning, 5% in social dimension, and 4% in overall quality of life of diabetics. Conclusion: Trait resilience has unconditional positive effect on all aspect of quality of life. Long standing diabetics may benefit from intervention addressing state

  17. Estimation of Elastic Modulus of Intact Rocks by Artificial Neural Network

    Science.gov (United States)

    Ocak, Ibrahim; Seker, Sadi Evren

    2012-11-01

    The modulus of elasticity of intact rock ( E i) is an important rock property that is used as an input parameter in the design stage of engineering projects such as dams, slopes, foundations, tunnel constructions and mining excavations. However, it is sometimes difficult to determine the modulus of elasticity in laboratory tests because high-quality cores are required. For this reason, various methods for predicting E i have been popular research topics in recently published literature. In this study, the relationships between the uniaxial compressive strength, unit weight ( γ) and E i for different types of rocks were analyzed, employing an artificial neural network and 195 data obtained from laboratory tests carried out on cores obtained from drilling holes within the area of three metro lines in Istanbul, Turkey. Software was developed in Java language using Weka class libraries for the study. To determine the prediction capacity of the proposed technique, the root-mean-square error and the root relative squared error indices were calculated as 0.191 and 92.587, respectively. Both coefficients indicate that the prediction capacity of the study is high for practical use.

  18. Determination of elastic modulus in nickel alloy from ultrasonic ...

    Indian Academy of Sciences (India)

    als scientists, and solid-state theorists; they connect to tech- nological, structural economics and safety, to various mate- rials phenomena and to their fundamental interatomic forces. (Ledbetter 1983). In any material which is a multiphase alloy, the elastic modulus is determined by the modulus of the indi- vidual phases and ...

  19. Development of a framework for resilience measurement: Suggestion of fuzzy Resilience Grade (RG) and fuzzy Resilience Early Warning Grade (REWG).

    Science.gov (United States)

    Omidvar, Mohsen; Mazloumi, Adel; Mohammad Fam, Iraj; Nirumand, Fereshteh

    2017-01-01

    Resilience engineering (RE) can be an alternative technique to the traditional risk assessment and management techniques, to predict and manage safety conditions of modern socio-technical organizations. While traditional risk management approaches are retrospective and highlight error calculation and computation of malfunction possibilities, resilience engineering seeks ways to improve capacity at all levels of organizations in order to build strong yet flexible processes. Considering the resilience potential measurement as a concern in complex working systems, the aim of this study was to quantify the resilience by the help of fuzzy sets and Multi-Criteria Decision-Making (MCDM) techniques. In this paper, we adopted the fuzzy analytic hierarchy process (FAHP) method to measure resilience in a gas refinery plant. A resilience assessment framework containing six indicators, each with its own sub-indicators, was constructed. Then, the fuzzy weights of the indicators and the sub-indicators were derived from pair-wise comparisons conducted by experts. The fuzzy evaluating vectors of the indicators and the sub-indicators computed according to the initial assessment data. Finally, the Comprehensive Resilience Index (CoRI), Resilience Grade (RG), and Resilience Early Warning Grade (REWG) were established. To demonstrate the applicability of the proposed method, an illustrative example in a gas refinery complex (an instance of socio-technical systems) was provided. CoRI of the refinery ranked as "III". In addition, for the six main indicators, RG and REWG ranked as "III" and "NEWZ", respectively, except for C3, in which RG ranked as "II", and REWG ranked as "OEWZ". The results revealed the engineering practicability and usefulness of the proposed method in resilience evaluation of socio-technical systems.

  20. A comparative study on the elastic modulus of polyvinyl alcohol sponge using different stress-strain definitions.

    Science.gov (United States)

    Karimi, Alireza; Navidbakhsh, Mahdi; Alizadeh, Mansour; Razaghi, Reza

    2014-10-01

    There have been different stress-strain definitions to measure the elastic modulus of spongy materials, especially polyvinyl alcohol (PVA) sponge. However, there is no agreement as to which stress-strain definition should be implemented. This study was aimed to show how different results are given by the various definitions of stress-strain used, and to recommend a specific definition when testing spongy materials. A fabricated PVA sponge was subjected to a series of tensile tests in order to measure its mechanical properties. Three stress definitions (second Piola-Kichhoff stress, engineering stress, and true stress) and four strain definitions (Almansi-Hamel strain, Green-St. Venant strain, engineering strain, and true strain) were used to determine the elastic modulus. The results revealed that the Almansi-Hamel strain definition exhibited the highest non-linear stress-strain relation and, as a result, may overestimate the elastic modulus at different stress definitions (second Piola-Kichhoff stress, engineering stress, and true stress). The Green-St. Venant strain definition failed to address the non-linear stress-strain relation using different definitions of stress and invoked an underestimation of the elastic modulus values. Engineering stress and strain definitions were only valid for small strains and displacements, which make them impractical when analyzing spongy materials. The results showed that the effect of varying the stress definition on the maximum stress measurements was significant but not when calculating the elastic modulus. It is important to consider which stress-strain definition is employed when characterizing the mechanical properties of spongy materials. Although the true stress-true strain definition exhibits a non-linear relation, we favor it in spongy materials mechanics as it gives more accurate measurements of the material's response using the instantaneous values.

  1. Flood Resilient Systems and their Application for Flood Resilient Planning

    Science.gov (United States)

    Manojlovic, N.; Gabalda, V.; Antanaskovic, D.; Gershovich, I.; Pasche, E.

    2012-04-01

    Following the paradigm shift in flood management from traditional to more integrated approaches, and considering the uncertainties of future development due to drivers such as climate change, one of the main emerging tasks of flood managers becomes the development of (flood) resilient cities. It can be achieved by application of non-structural - flood resilience measures, summarised in the 4As: assistance, alleviation, awareness and avoidance (FIAC, 2007). As a part of this strategy, the key aspect of development of resilient cities - resilient built environment can be reached by efficient application of Flood Resilience Technology (FReT) and its meaningful combination into flood resilient systems (FRS). FRS are given as [an interconnecting network of FReT which facilitates resilience (including both restorative and adaptive capacity) to flooding, addressing physical and social systems and considering different flood typologies] (SMARTeST, http://www.floodresilience.eu/). Applying the system approach (e.g. Zevenbergen, 2008), FRS can be developed at different scales from the building to the city level. Still, a matter of research is a method to define and systematise different FRS crossing those scales. Further, the decision on which resilient system is to be applied for the given conditions and given scale is a complex task, calling for utilisation of decision support tools. This process of decision-making should follow the steps of flood risk assessment (1) and development of a flood resilience plan (2) (Manojlovic et al, 2009). The key problem in (2) is how to match the input parameters that describe physical&social system and flood typology to the appropriate flood resilient system. Additionally, an open issue is how to integrate the advances in FReT and findings on its efficiency into decision support tools. This paper presents a way to define, systematise and make decisions on FRS at different scales of an urban system developed within the 7th FP Project

  2. Low modulus Ti–Nb–Hf alloy for biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    González, M., E-mail: Marta.Gonzalez.Colominas@upc.edu [Department of Materials Science and Metallurgy, Universitat Politècnica de Catalunya (UPC), Avda. Diagonal 647, 08028 Barcelona (Spain); Materials Science, Elisava Escola Superior de Disseny i Enginyeria de Barcelona, La Rambla 30-32, 08002 Barcelona (Spain); Peña, J. [Department of Materials Science and Metallurgy, Universitat Politècnica de Catalunya (UPC), Avda. Diagonal 647, 08028 Barcelona (Spain); Materials Science, Elisava Escola Superior de Disseny i Enginyeria de Barcelona, La Rambla 30-32, 08002 Barcelona (Spain); Gil, F.J.; Manero, J.M. [Department of Materials Science and Metallurgy, Universitat Politècnica de Catalunya (UPC), Avda. Diagonal 647, 08028 Barcelona (Spain); Ciber-BBN (Spain)

    2014-09-01

    β-Type titanium alloys with a low elastic modulus are a potential strategy to reduce stress shielding effect and to enhance bone remodeling in implants used to substitute failed hard tissue. For biomaterial application, investigation on the mechanical behavior, the corrosion resistance and the cell response is required. The new Ti25Nb16Hf alloy was studied before and after 95% cold rolling (95% C.R.). The mechanical properties were determined by tensile testing and its corrosion behavior was analyzed by potentiostatic equipment in Hank's solution at 37 °C. The cell response was studied by means of cytotoxicity evaluation, cell adhesion and proliferation measurements. The stress–strain curves showed the lowest elastic modulus (42 GPa) in the cold worked alloy and high tensile strength, similar to that of Ti6Al4V. The new alloy exhibited better corrosion resistance in terms of open circuit potential (E{sub OCP}), but was similar in terms of corrosion current density (i{sub CORR}) compared to Ti grade II. Cytotoxicity studies revealed that the chemical composition of the alloy does not induce cytotoxic activity. Cell studies in the new alloy showed a lower adhesion and a higher proliferation compared to Ti grade II presenting, therefore, mechanical features similar to those of human cortical bone and, simultaneously, a good cell response. - Highlights: • Presents low elastic modulus and high strength and elastic deformability. • Exhibits good biocompatibility in terms of cytotoxicity and cell response. • Corrosion resistance of this alloy is good, similar to that of Ti grade II. • Potential candidate for implants used to substitute failed hard tissue.

  3. The influence of resin flexural modulus on the magnitude of ceramic strengthening.

    LENUS (Irish Health Repository)

    Fleming, Garry J P

    2012-07-01

    The aim was to determine the magnitude of ceramic resin-strengthening with resin-based materials with varying flexural moduli using a regression technique to assess the theoretical strengthening at a \\'zero\\' resin-coating thickness. The hypothesis tested was that experimentally, increasing resin flexural modulus results in increased resin-strengthening observed at a theoretical \\'zero\\' resin-coating thickness.

  4. Resilience Indicator Summaries and Resilience Scores CNMI JPEG Maps

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Maps of relative classifications (low to high) for six resilience indicators and two anthropogenic stressors and a map of final relative resilience scores for 78...

  5. Resilience Indicator Summaries and Resilience Scores CNMI Excel database

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Maps of relative classifications (low to high) for six resilience indicators and two anthropogenic stressors and a map of final relative resilience scores for 78...

  6. The temperature dependence of the isothermal bulk modulus at 1 bar pressure

    International Nuclear Information System (INIS)

    Garai, J.; Laugier, A.

    2007-01-01

    It is well established that the product of the volume coefficient of thermal expansion and the bulk modulus is nearly constant at temperatures higher than the Debye temperature. Using this approximation allows predicting the values of the bulk modulus. The derived analytical solution for the temperature dependence of the isothermal bulk modulus has been applied to ten substances. The good correlations to the experiments indicate that the expression may be useful for substances for which bulk modulus data are lacking

  7. Resilience amid Academic Stress: The Moderating Impact of Social Support among Social Work Students

    Directory of Open Access Journals (Sweden)

    Scott E. Wilks

    2008-12-01

    Full Text Available Purpose: The purpose of this study was to examine the relationship between academic stress and perceived resilience among social work students, and to identify social support as a protective factor of resilience on this relationship. A conceptual model of moderation was used to test the role of social support as protective. Methods: The sample consisted of 314 social work students (BSW=144; MSW=170 from three accredited schools/programs in the southern United States. Voluntary survey data were collected on demographics and constructs of academic stress, family support, friend support, and resilience. Hierarchical regression analysis was conducted to show the composite impact of demographic and model factors on the resilience outcome. Moderation was tested using a traditional regression series as guidelines of moderation with continuous variables. Path analyses illustrated main effects and moderation in the study’s conceptual model. Results: The sample reported moderate levels of academic stress and social support, and a fairly high level of resilience. Academic stress negatively related to social support and resilience. Social support positively influenced resilience. Academic stress accounted for the most variation in resilience scores. Friend support significantly moderated the negative relationship between academic stress and resilience. Conclusion: The current study demonstrated the likelihood that friend support plays a protective role with resilience amid an environment of academic stress. Implications for social work faculty and internship agency practitioners are discussed.

  8. A Measure of Team Resilience: Developing the Resilience at Work Team Scale.

    Science.gov (United States)

    McEwen, Kathryn; Boyd, Carolyn M

    2018-03-01

    This study develops, and initial evaluates, a new measure of team-based resilience for use in research and practice. We conducted preliminary analyses, based on a cross-sectional sample of 344 employees nested within 31 teams. Seven dimensions were identified through exploratory and confirmatory factor analyses. The measure had high reliability and significant discrimination to indicate the presence of a unique team-based aspect of resilience that contributed to higher work engagement and higher self-rated team performance, over and above the effects of individual resilience. Multilevel analyses showed that team, but not individual, resilience predicted self-rated team performance. Practice implications include a need to focus on collective as well as individual behaviors in resilience-building. The measure provides a diagnostic instrument for teams and a scale to evaluate organizational interventions and research the relationship of resilience to other constructs.

  9. Validation of a Measure of Family Resilience among Iraq and Afghanistan Veterans.

    Science.gov (United States)

    Finley, Erin P; Pugh, Mary Jo; Palmer, Raymond F

    2016-01-01

    Although interactions within veterans' families may support or inhibit resilient coping to stress and trauma across the deployment cycle, research on family resilience has been hampered by the lack of a brief assessment. Using a three-stage mixed-method study, we developed and conducted preliminary validation of a measure of family resilience tailored for Iraq and Afghanistan veterans (IAV), the Family Resilience Scale for Veterans (FRS-V) , which was field-tested using a survey of 151 IAV. Our findings indicate the resulting 6-item measure shows strong initial reliability and validity and support the application of existing models of family resilience in this population.

  10. Physical disease and resilient outcomes: a systematic review of resilience definitions and study methods.

    Science.gov (United States)

    Johnston, Marjorie C; Porteous, Terry; Crilly, Michael A; Burton, Christopher D; Elliott, Alison; Iversen, Lisa; McArdle, Karen; Murray, Alison; Phillips, Louise H; Black, Corri

    2015-01-01

    Findings from physical disease resilience research may be used to develop approaches to reduce the burden of disease. However, there is no consensus on the definition and measurement of resilience in the context of physical disease. The aim was to summarize the range of definitions of physical disease resilience and the approaches taken to study it in studies examining physical disease and its relationship to resilient outcomes. Electronic databases were searched from inception to March 2013 for studies in which physical disease was assessed for its association with resilient outcomes. Article screening, data extraction, and quality assessment were carried out independently by 2 reviewers, with disagreements being resolved by a third reviewer. The results were combined using a narrative technique. Of 2280 articles, 12 met the inclusion criteria. Of these studies, 1 was of high quality, 9 were of moderate quality, and 2 were low quality. The common findings were that resilience involves maintaining healthy levels of functioning following adversity and that it is a dynamic process not a personality trait. Studies either assessed resilience based on observed outcomes or via resilience measurement scales. They either considered physical disease as an adversity leading to resilience or as a variable modifying the relationship between adversity and resilience. This work begins building consensus as to the approach to take when defining and measuring physical disease resilience. Resilience should be considered as a dynamic process that varies across the life-course and across different domains, therefore the choice of a resilience measure should reflect this. Copyright © 2015 The Academy of Psychosomatic Medicine. Published by Elsevier Inc. All rights reserved.

  11. Mapping Resilience

    DEFF Research Database (Denmark)

    Carruth, Susan

    2015-01-01

    by planners when aiming to construct resilient energy plans. It concludes that a graphical language has the potential to be a significant tool, flexibly facilitating cross-disciplinary communication and decision-making, while emphasising that its role is to support imaginative, resilient planning rather than...... the relationship between resilience and energy planning, suggesting that planning in, and with, time is a core necessity in this domain. It then reviews four examples of graphically mapping with time, highlighting some of the key challenges, before tentatively proposing a graphical language to be employed...

  12. Conceptualizing community resilience to natural hazards - the emBRACE framework

    Science.gov (United States)

    Kruse, Sylvia; Abeling, Thomas; Deeming, Hugh; Fordham, Maureen; Forrester, John; Jülich, Sebastian; Nuray Karanci, A.; Kuhlicke, Christian; Pelling, Mark; Pedoth, Lydia; Schneiderbauer, Stefan

    2017-12-01

    The level of community is considered to be vital for building disaster resilience. Yet, community resilience as a scientific concept often remains vaguely defined and lacks the guiding characteristics necessary for analysing and enhancing resilience on the ground. The emBRACE framework of community resilience presented in this paper provides a heuristic analytical tool for understanding, explaining and measuring community resilience to natural hazards. It was developed in an iterative process building on existing scholarly debates, on empirical case study work in five countries and on participatory consultation with community stakeholders where the framework was applied and ground-tested in different contexts and for different hazard types. The framework conceptualizes resilience across three core domains: (i) resources and capacities, (ii) actions and (iii) learning. These three domains are conceptualized as intrinsically conjoined within a whole. Community resilience is influenced by these integral elements as well as by extra-community forces comprising disaster risk governance and thus laws, policies and responsibilities on the one hand and on the other, the general societal context, natural and human-made disturbances and system change over time. The framework is a graphically rendered heuristic, which through application can assist in guiding the assessment of community resilience in a systematic way and identifying key drivers and barriers of resilience that affect any particular hazard-exposed community.

  13. Teaching Resilience: A Narrative Inquiry into the Importance of Teacher Resilience

    Science.gov (United States)

    Vance, Angela; Pendergast, Donna; Garvis, Susanne

    2015-01-01

    This study set out to explore how high school teachers perceive their resilience as they teach a scripted social and emotional learning program to students with the goal of promoting the resilience skills of the students in their pastoral care classes. In this emerging field of research on teacher resilience, there is a paucity of research…

  14. Rights for resilience: food sovereignty, power, and resilience in development practice

    Directory of Open Access Journals (Sweden)

    Marygold Walsh-Dilley

    2016-03-01

    Full Text Available Even as resilience thinking becomes evermore popular as part of strategic programming among development and humanitarian organizations, uncertainty about how to define, operationalize, measure, and evaluate resilience for development goals prevails. As a result, many organizations and institutions have undertaken individual, collective, and simultaneous efforts toward clarification and definition. This has opened up a unique opportunity for a rethinking of development practices. The emergent consensus about what resilience means within development practice will have important consequences both for development practitioners and the communities in which they work. Incorporating resilience thinking into development practice has the potential to radically transform this arena in favor of social and environmental justice, but it could also flounder as a way to dress old ideas in new clothes or, at worst, to further exploit, disempower, and marginalize the world's most vulnerable populations. We seek to make an intervention into the definitional debates surrounding resilience that supports the former and helps prevent the latter. We argue that resilience thinking as it has been developed in social-ecological systems and allied literatures has a lot in common with the concept of food sovereignty and that paying attention to some of the lessons and claims of food sovereignty movements could contribute toward building a consensus around resilience that supports social and environmental justice. In particular, the food sovereignty movement relies on a strategy that elevates rights. We suggest that a rights-based approach to resilience-oriented development practice could contribute to its application in just and equitable ways.

  15. Gender, violence and resilience among Ugandan adolescents.

    Science.gov (United States)

    Namy, Sophie; Carlson, Catherine; Norcini Pala, Andrea; Faris, Devin; Knight, Louise; Allen, Elizabeth; Devries, Karen; Naker, Dipak

    2017-08-01

    Resilience, commonly understood as the ability to maintain adaptive functioning in the face of adversity, has emerged as a salient entry point in the field of positive youth development. This study makes a unique contribution by exploring dimensions of resilience among adolescents in Uganda, examining associations between violence from different perpetrators and resilience, and testing whether sex moderates these relationships. Analyses are based on data from 3706 primary school students. Exploratory factor analysis (EFA) identified five factors underlying the construct of resilience: Emotional Support; Family Connectedness; School Connectedness; Social Assets; and Psychological Assets. We used regression analysis to investigate associations between these dependent variables, background characteristics, and experiences of violence (including exposure to intimate partner violence against female caregivers). Results reflect a complex relationship between violence and resilience, with patterns varying by perpetrator (e.g., teacher, peers, caregivers) and some evidence that the sex of the student moderates these dynamics. Overall, there is a consistently negative relationship between all violence measures and Psychological Assets. In addition, teacher violence is associated with lower resilience across factors and both caregiver violence and exposure to IPV are consistently associated with decreased Family Connectedness. These findings suggest that adolescents experiencing (and exposed to) violence from adults may be particularly vulnerable to internalizing and/or externalizing behaviors and withdrawal from the family. Findings point to preventing violence from teachers complemented with enhancing family relationships as promising avenues for resilience-strengthening interventions, and also emphasize the need to consider gendered strategies to ensure girls and boys benefit equally. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  16. Can reliable values of Young's modulus be deduced from Fisher's (1971) spinning lens measurements?

    Science.gov (United States)

    Burd, H J; Wilde, G S; Judge, S J

    2006-04-01

    The current textbook view of the causes of presbyopia rests very largely on a series of experiments reported by R.F. Fisher some three decades ago, and in particular on the values of lens Young's modulus inferred from the deformation caused by spinning excised lenses about their optical axis (Fisher 1971) We studied the extent to which inferred values of Young's modulus are influenced by assumptions inherent in the mathematical procedures used by Fisher to interpret the test and we investigated several alternative interpretation methods. The results suggest that modelling assumptions inherent in Fisher's original method may have led to systematic errors in the determination of the Young's modulus of the cortex and nucleus. Fisher's conclusion that the cortex is stiffer than the nucleus, particularly in middle age, may be an artefact associated with these systematic errors. Moreover, none of the models we explored are able to account for Fisher's claim that the removal of the capsule has only a modest effect on the deformations induced in the spinning lens.

  17. Evaluation of linear polymerization shrinkage, flexural strength and modulus of elasticity of dental composites

    Directory of Open Access Journals (Sweden)

    Gabriela Queiroz de Melo Monteiro

    2010-03-01

    Full Text Available Linear polymerization shrinkage (LPS, flexural strength (FS and modulus of elasticity (ME of 7 dental composites (Filtek Z350™, Filtek Z250™/3M ESPE; Grandio™, Polofil Supra™/VOCO; TPH Spectrum™, TPH3™, Esthet-X™/Denstply were measured. For the measurement of LPS, composites were applied to a cylindrical metallic mold and polymerized (n = 8. The gap formed at the resin/mold interface was observed using scanning electron microscopy (1500×. For FS and ME, specimens were prepared according to the ISO 4049 specifications (n = 10. Statistical analysis of the data was performed with one-way ANOVA and the Tukey test. TPH Spectrum presented significantly higher LPS values (29.45 µm. Grandio had significantly higher mean values for FS (141.07 MPa and ME (13.91 GPa. The relationship between modulus of elasticity and polymerization shrinkage is the main challenge for maintenance of the adhesive interface, thus composites presenting high shrinkage values, associated with a high modulus of elasticity tend to disrupt the adhesive interface under polymerization.

  18. Determination of young's modulus of PZT-influence of cantilever orientation

    NARCIS (Netherlands)

    Nazeer, H.; Woldering, L.A.; Abelmann, Leon; Elwenspoek, Michael Curt

    Calculation of the resonance frequency of cantilevers fabricated from an elastically anisotropic material requires the use of an effective Young’s modulus. In this paper a technique to determine the appropriate effective Young’s modulus for arbitrary cantilever geometries is introduced. This

  19. Resilience in disaster research

    DEFF Research Database (Denmark)

    Dahlberg, Rasmus; Johannessen-Henry, Christine Tind; Raju, Emmanuel

    2015-01-01

    This paper explores the concept of resilience in disaster management settings in modern society. The diversity and relatedness of ‘resilience’ as a concept and as a process are reflected in its presentation through three ‘versions’: (i) pastoral care and the role of the church for victims...... of disaster trauma, (ii) federal policy and the US Critical Infrastructure Plan, and (iii) the building of resilient communities for disaster risk reduction practices. The three versions aim to offer characteristic expressions of resilience, as increasingly evident in current disaster literature....... In presenting resilience through the lens of these three versions, the article highlights the complexity in using resilience as an all-encompassing word. The article also suggests the need for understanding the nexuses between risk, vulnerability, and policy for the future of resilience discourse....

  20. An overdue alignment of risk and resilience? A conceptual contribution to community resilience.

    Science.gov (United States)

    Mochizuki, Junko; Keating, Adriana; Liu, Wei; Hochrainer-Stigler, Stefan; Mechler, Reinhard

    2018-04-01

    A systematic review of literature on community resilience measurement published between 2005 and 2014 revealed that the profound lack of clarity on risk and resilience is one of the main reasons why confusion about terms such as adaptive capacity, resilience, and vulnerability persists, despite the effort spared to operationalise these concepts. Resilience is measured in isolation in some cases, where a shock is perceived to arise external to the system of interest. Problematically, this contradicts the way in which the climate change and disaster communities perceive risk as manifesting itself endogenously as a function of exposure, hazard, and vulnerability. The common conceptualisation of resilience as predominantly positive is problematic as well when, in reality, many undesirable properties of a system are resilient. Consequently, this paper presents an integrative framework that highlights the interactions between risk drivers and coping, adaptive, and transformative capacities, providing an improved conceptual basis for resilience measurement. © 2018 The Author(s). Disasters © Overseas Development Institute, 2018.

  1. Young's Modulus of Wurtzite and Zinc Blende InP Nanowires.

    Science.gov (United States)

    Dunaevskiy, Mikhail; Geydt, Pavel; Lähderanta, Erkki; Alekseev, Prokhor; Haggrén, Tuomas; Kakko, Joona-Pekko; Jiang, Hua; Lipsanen, Harri

    2017-06-14

    The Young's modulus of thin conical InP nanowires with either wurtzite or mixed "zinc blende/wurtzite" structures was measured. It has been shown that the value of Young's modulus obtained for wurtzite InP nanowires (E [0001] = 130 ± 30 GPa) was similar to the theoretically predicted value for the wurtzite InP material (E [0001] = 120 ± 10 GPa). The Young's modulus of mixed "zinc blende/wurtzite" InP nanowires (E [111] = 65 ± 10 GPa) appeared to be 40% less than the theoretically predicted value for the zinc blende InP material (E [111] = 110 GPa). An advanced method for measuring the Young's modulus of thin and flexible nanostructures is proposed. It consists of measuring the flexibility (the inverse of stiffness) profiles 1/k(x) by the scanning probe microscopy with precise control of loading force in nanonewton range followed by simulations.

  2. Organizational culture of a psychiatric hospital and resilience of nursing workers.

    Science.gov (United States)

    Rocha, Fernanda Ludmilla Rossi; Gaioli, Cheila Cristina Leonardo de Oliveira; Camelo, Silvia Helena Henriques; Mininel, Vivian Aline; Vegro, Thamiris Cavazzani

    2016-01-01

    to analyze the organizational culture of a psychiatric hospital and identify the capacity of resilience of nursing workers. quantitative research. For data collection, were used the Brazilian Instrument for Evaluation of Organizational Culture (IBACO - Instrumento Brasileiro para Avaliação da Cultura Organizacional) and the Resilience Scale (RS). participants reported the existence of centralization of power and devaluation of workers, despite recognizing the existence of collaboration at work and practices for improving interpersonal relations. In relation to the capacity of resilience, 50% of workers showed high level, and 42.9% a medium level of resilience. The correlation tests revealed negative values between the IBACO and RS domains, indicating that the lower the appreciation of individuals in the institution, the greater their capacity of resilience. the organizational values reflect the work organization model in the institution that devalues the workers' needs and requires greater capacity of resilience.

  3. Evaluating The Performance of Asphalt Concrete Mixes by Utilizing Carbon Black as Asphalt Modifier

    Directory of Open Access Journals (Sweden)

    Aliaa Faleh Al.ani

    2018-02-01

    Full Text Available Carbon black produced from several factories in Iraq is expected to provide a reinforcing agent for asphalt paving materials. Carbon black has many characteristics that distinguish  it from conventional mineral fillers, as well as their different function in pavement mixtures. Theory and exercise advanced  in the inclusive utilize of carbon black as a reinforcing agent for rubber has led to concept of asphalt reinforcement. The very fine particles of micro filler added in different contents will be dispersed in asphalt cement improving the mechanical properties of asphalt concrete mixes. In this Four percentages rates were utilized; 0, 3, 6, and 9 percent adding to asphalt grade (60-70. Mixes of asphalt concrete were destined at their optimum asphalt content (OAC then experienced to assess their engineering characteristics that contain moisture of damage, permanent deformation, modulus of resilient and characteristics of fatigue. These characteristics have been assessed utilizing indirect tensile strength, uniaxial repeated loading and repeated flexural beam tests. Mixtures improved with carbon black were existed to have amended permanent deformation and fatigue characteristics, else exhibited high resilient modulus and lower moisture susceptibility. Result showed that a rate changed from 3 to 9 percent has shown an increase in resilient modulus for increment of carbon black and modulus of resilient for mixes with 9 percent carbon black was 1.4 times that for mixes with 0 percent carbon black. The altering of carbon black from a range (3-9 percent has modified the fatigue property of the asphalt concrete mixes as determined by flexural test, Significantly, to modify the asphalt concrete manner taken the  percent of carbon black 6, and to produce the mixes more durable , higher resistance to distresses by adding the local knowledge.

  4. Calculating tissue shear modulus and pressure by 2D log-elastographic methods

    International Nuclear Information System (INIS)

    McLaughlin, Joyce R; Zhang, Ning; Manduca, Armando

    2010-01-01

    Shear modulus imaging, often called elastography, enables detection and characterization of tissue abnormalities. In this paper the data are two displacement components obtained from successive MR or ultrasound data sets acquired while the tissue is excited mechanically. A 2D plane strain elastic model is assumed to govern the 2D displacement, u. The shear modulus, μ, is unknown and whether or not the first Lamé parameter, λ, is known the pressure p = λ∇ . u which is present in the plane strain model cannot be measured and is unreliably computed from measured data and can be shown to be an order one quantity in the units kPa. So here we present a 2D log-elastographic inverse algorithm that (1) simultaneously reconstructs the shear modulus, μ, and p, which together satisfy a first-order partial differential equation system, with the goal of imaging μ; (2) controls potential exponential growth in the numerical error and (3) reliably reconstructs the quantity p in the inverse algorithm as compared to the same quantity computed with a forward algorithm. This work generalizes the log-elastographic algorithm in Lin et al (2009 Inverse Problems 25) which uses one displacement component, is derived assuming that the component satisfies the wave equation and is tested on synthetic data computed with the wave equation model. The 2D log-elastographic algorithm is tested on 2D synthetic data and 2D in vivo data from Mayo Clinic. We also exhibit examples to show that the 2D log-elastographic algorithm improves the quality of the recovered images as compared to the log-elastographic and direct inversion algorithms

  5. Data replicating the factor structure and reliability of commonly used measures of resilience: The Connor–Davidson Resilience Scale, Resilience Scale, and Scale of Protective Factors

    Directory of Open Access Journals (Sweden)

    A.N. Madewell

    2016-09-01

    Full Text Available The data presented in this article are related to the article entitled “Assessing Resilience in Emerging Adulthood: The Resilience Scale (RS, Connor Davidson Resilience Scale (CD-RISC, and Scale of Protective Factors (SPF” (Madewell and Ponce-Garcia, 2016 [1]. The data were collected from a sample of 451 college students from three universities located in the Southwestern region of the United States: 374 from a large public university and 67 from two smaller regional universities. The data from the three universities did not significantly differ in terms of demographics. The data represent participant responses on six measurements to include the Resilience Scale-25 (RS-25, Resilience Scale-14 (RS-14, Connor Davidson Resilience Scale-25 (CD-RISC-25, Connor Davidson Resilience Scale-10 (CD-RISC-10, Scale of Protective Factors-24 (SPF-24, and the Life Stressor Checklist Revised (LSC-R. Keywords: Scale of Protective Factors, Resilience Scale, Connor–Davidson Resilience Scale, Emerging adulthood, Confirmatory factor analysis

  6. Multifractal resilience and viability

    Science.gov (United States)

    Tchiguirinskaia, I.; Schertzer, D. J. M.

    2017-12-01

    The term resilience has become extremely fashionable and there had been many attempts to provide operational definition and in fact metrics going beyond a set of more or less ad-hoc indicators. The viability theory (Aubin and Saint-Pierre, 2011) have been used to give a rather precise mathematical definition of resilience (Deffuant and Gilbert, 2011). However, it does not grasp the multiscale nature of resilience that is rather fundamental as particularly stressed by Folke et al (2010). In this communication, we first recall a preliminary attempt (Tchiguirinskaia et al., 2014) to define multifractal resilience with the help of the maximal probable singularity. Then we extend this multifractal approach to the capture basin of the viability, therefore the resilient basin. Aubin, J P, A. Bayen, and P Saint-Pierre (2011). Viability Theory. New Directions. Springer, Berlin,. Deffuant, G. and Gilbert, N. (eds) (2011) Viability and Resilience of Complex Systems. Springer Berlin.Folke, C., S R Carpenter, B Walker, M Sheffer, T Chapin, and J Rockstroem (2010). Resilience thinking: integrating re- silience, adaptability and transformability. Ecology and So- ciety, 14(4):20, Tchiguirinskaia,I., D. Schertzer, , A. Giangola-Murzyn and T. C. Hoang (2014). Multiscale resilience metrics to assess flood. Proceedings of ICCSA 2014, Normandie University, Le Havre, France -.

  7. Framing resilience: social uncertainty in designing urban climate resilience

    NARCIS (Netherlands)

    Wardekker, J.A.

    2016-01-01

    Building urban resilience to climate change and other challenges will be essential for maintaining thriving cities into the future. Resilience has become very popular in both research on and practice of climate adaptation. However, people have different interpretations of what it means: what

  8. Elastic modulus of tree frog adhesive toe pads.

    Science.gov (United States)

    Barnes, W Jon P; Goodwyn, Pablo J Perez; Nokhbatolfoghahai, Mohsen; Gorb, Stanislav N

    2011-10-01

    Previous work using an atomic force microscope in nanoindenter mode indicated that the outer, 10- to 15-μm thick, keratinised layer of tree frog toe pads has a modulus of elasticity equivalent to silicone rubber (5-15 MPa) (Scholz et al. 2009), but gave no information on the physical properties of deeper structures. In this study, micro-indentation is used to measure the stiffness of whole toe pads of the tree frog, Litoria caerulea. We show here that tree frog toe pads are amongst the softest of biological structures (effective elastic modulus 4-25 kPa), and that they exhibit a gradient of stiffness, being stiffest on the outside. This stiffness gradient results from the presence of a dense network of capillaries lying beneath the pad epidermis, which probably has a shock absorbing function. Additionally, we compare the physical properties (elastic modulus, work of adhesion, pull-off force) of the toe pads of immature and adult frogs.

  9. Refining Trait Resilience: Identifying Engineering, Ecological, and Adaptive Facets from Extant Measures of Resilience

    Science.gov (United States)

    Maltby, John; Day, Liz; Hall, Sophie

    2015-01-01

    The current paper presents a new measure of trait resilience derived from three common mechanisms identified in ecological theory: Engineering, Ecological and Adaptive (EEA) resilience. Exploratory and confirmatory factor analyses of five existing resilience scales suggest that the three trait resilience facets emerge, and can be reduced to a 12-item scale. The conceptualization and value of EEA resilience within the wider trait and well-being psychology is illustrated in terms of differing relationships with adaptive expressions of the traits of the five-factor personality model and the contribution to well-being after controlling for personality and coping, or over time. The current findings suggest that EEA resilience is a useful and parsimonious model and measure of trait resilience that can readily be placed within wider trait psychology and that is found to contribute to individual well-being. PMID:26132197

  10. A Whole Community Approach toward Child and Youth Resilience Promotion: A Review of Resilience Literature.

    Science.gov (United States)

    Khanlou, Nazilla; Wray, Ron

    2014-01-01

    A literature review of child and youth resilience with a focus on: definitions and factors of resilience; relationships between resilience, mental health and social outcomes; evidence for resilience promoting interventions; and implications for reducing health inequities. To conduct the review, the first two following steps were conducted iteratively and informed the third step: 1) Review of published peer-review literature since 2000; and 2) Review of grey literature; and 3) Quasi-realist synthesis of evidence. Evidence from three perspectives were examined: i) whether interventions can improve 'resilience' for vulnerable children and youth; ii) whether there is a differential effect among different populations; and, iii) whether there is evidence that resilience interventions 'close the gap' on health and social outcome measures. Definitions of resilience vary as do perspectives on it. We argue for a hybrid approach that recognizes the value of combining multiple theoretical perspectives, epistemologies (positivistic and constructivist/interpretive/critical) in studying resilience. Resilience is: a) a process (rather than a single event), b) a continuum (rather than a binary outcome), and c) likely a global concept with specific dimensions. Individual, family and social environmental factors influence resilience. A social determinants perspective on resilience and mental health is emphasized. Programs and interventions to promoting resilience should be complimentary to public health measures addressing the social determinants of health. A whole community approach to resilience is suggested as a step toward closing the public health policy gap. Local initiatives that stimulate a local transformation process are needed. Recognition of each child's or youth's intersections of gender, lifestage, family resources within the context of their identity markers fits with a localized approach to resilience promotion and, at the same time, requires recognition of the

  11. Assessing Resilience in Stressed Watersheds

    Directory of Open Access Journals (Sweden)

    Kristine T. Nemec

    2014-03-01

    Full Text Available Although several frameworks for assessing the resilience of social-ecological systems (SESs have been developed, some practitioners may not have sufficient time and information to conduct extensive resilience assessments. We have presented a simplified approach to resilience assessment that reviews the scientific, historical, and social literature to rate the resilience of an SES with respect to nine resilience properties: ecological variability, diversity, modularity, acknowledgement of slow variables, tight feedbacks, social capital, innovation, overlap in governance, and ecosystem services. We evaluated the effects of two large-scale projects, the construction of a major dam and the implementation of an ecosystem recovery program, on the resilience of the central Platte River SES (Nebraska, United States. We used this case study to identify the strengths and weaknesses of applying a simplified approach to resilience assessment. Although social resilience has increased steadily since the predam period for the central Platte River SES, ecological resilience was greatly reduced in the postdam period as compared to the predam and ecosystem recovery program time periods.

  12. Psychobiological Assessment and Enhancement of Team Cohesion and Psychological Resilience in ROTC Cadets Using a Virtual-Reality Team Cohesion Test

    Science.gov (United States)

    2016-06-01

    Using a Virtual - Reality Team Cohesion Test PRINCIPAL INVESTIGATOR: Josh Woolley MD/PhD CONTRACTING ORGANIZATION: NORTHERN CALIFORNIA INSTITUTE SAN...Team Cohesion and Psychological Resilience in ROTC Cadets Using a Virtual - Reality Team Cohesion Test 5b. GRANT NUMBER W81XWH-15-1-0042 5c. PROGRAM...targets while flying a virtual air vehicle. No individual has access to all the necessary information or controls, so operating as a team is crucial

  13. The elastic modulus of alumina-zirconia composite using through transmission ultrasonics

    International Nuclear Information System (INIS)

    Tan, K.S.; Hing, P.

    1996-01-01

    The elastic modulus of unstabilized Al 2 O 3 -ZrO 2 composites is determined from ultrasonic velocities and density measurements. The dynamic elastic modulus and the density of the green unstabilized Al 2 O 3 -ZrO 2 follow the rule of mixture. However, the elastic modulus and density of the sintered Al 2 O 3 -ZrO 2 do not follow the rule of mixture. The elastic modulus and diametrical compressive fracture stress of the Al 2 O 3 can be enhanced by (1) a high green (before sintering) compacting pressure and (2) addition of about 3wt% unstabilized ZrO 2 at a sintering time of two hours at 1550 degC. The ZrO 2 is found to improve the bulk density of the composite by a reduction in the porosity. This improves the elastic modulus and the diametrical compressive fracture stress. The thermal expansion on cooling with > 25wt% ZrO 2 in the Al 2 O 3 matrix has also been established. (author)

  14. Family Resilience in the Military

    Science.gov (United States)

    Meadows, Sarah O.; Beckett, Megan K.; Bowling, Kirby; Golinelli, Daniela; Fisher, Michael P.; Martin, Laurie T.; Meredith, Lisa S.; Osilla, Karen Chan

    2016-01-01

    Abstract Military life presents a variety of challenges to military families, including frequent separations and relocations as well as the risks that service members face during deployment; however, many families successfully navigate these challenges. Despite a recent emphasis on family resilience, the U.S. Department of Defense (DoD) does not have a standard and universally accepted definition of family resilience. A standard definition is a necessary for DoD to more effectively assess its efforts to sustain and improve family resilience. RAND authors reviewed the literature on family resilience and, in this study, recommend a definition that could be used DoD-wide. The authors also reviewed DoD policies related to family resilience, reviewed models that describe family resilience and identified key family resilience factors, and developed several recommendations for how family-resilience programs and policies could be managed across DoD. PMID:28083409

  15. Resilience of the IMS system

    DEFF Research Database (Denmark)

    Kamyod, Chayapol; Nielsen, Rasmus Hjorth; Prasad, Neeli R.

    2014-01-01

    The paper focuses on end-to-end resilience analysis of the IMS based network through the principal resilience parameters by using OPNET. The resilience behaviours of communication across multiple IMS domains are investigated at different communication scenarios and compared with previous state......-of-the-art. Moreover, the resilience effects when adding a redundancy of the S-CSCF unit are examined. The results disclose interesting resilience behaviours for long distance communications....

  16. Effect of Waste Plastic as Bitumen Modified in Asphalt Mixture

    Directory of Open Access Journals (Sweden)

    Abdullah Mohd Ezree

    2017-01-01

    Full Text Available The objectives of this study are to investigate the engineering properties of the asphalt mixtures containing waste plastic at different percentages i.e. 4%, 6%, 8%, and 10% by weight of bitumen. The experimental tests performed in the study were stability, tensile strength, resilient modulus and dynamic creep test. Results showed that the mixture with 4% plastic has the highest stability (184kN. However, the stability slightly decreases with the increase of plastic additive. On the other hand, the highest tensile strength among the modified asphaltic concrete is 1049kPa (8% plastic added. The modified asphalt mixture with 8% plastic has the highest resilient modulus, which is 3422 MPa (25°C and 494Mpa (40°C. Where the highest creep modulus recorded is 73.30Mpa at 8% plastic added. It can be concluded that the addition of 8% plastic gave the highest value properties of asphalt mixture. Finally, it can be said that 8% plastic is the optimum value adding.

  17. The Dark Side of Resilience and Burnout: A Moderation-Mediation Model.

    Directory of Open Access Journals (Sweden)

    Luke Treglown

    Full Text Available This study tested whether specific dark-side traits may be beneficial in manifesting and maintaining Resilience, whilst others are vulnerability factors for Burnout. Four hundred and fifty-one (50 female ambulance personnel completed three questionnaires as a part of a selection and development assessment. The study utilised the Hogan Development survey as a measure of dark side personality, the Copenhagen Burnout Inventory to assess work-related burnout, and the Resilience Scale- 14 to measure resilience levels. Those high on Excitable and Cautious but low on Bold and Reserved were linked to an increased vulnerability to Burnout. Also those high on Bold and Diligent yet low on the Excitable, Cautious, and Imaginative scales were more resilient. Structural Equation Modelling revealed that resilience plays both a mediating and moderating role on personality and burnout. Theoretical implications suggest future research assessing the predictive capacity of psychological variables on burnout should account the indirect effect of resilience.

  18. The Dark Side of Resilience and Burnout: A Moderation-Mediation Model.

    Science.gov (United States)

    Treglown, Luke; Palaiou, Kat; Zarola, Anthony; Furnham, Adrian

    2016-01-01

    This study tested whether specific dark-side traits may be beneficial in manifesting and maintaining Resilience, whilst others are vulnerability factors for Burnout. Four hundred and fifty-one (50 female) ambulance personnel completed three questionnaires as a part of a selection and development assessment. The study utilised the Hogan Development survey as a measure of dark side personality, the Copenhagen Burnout Inventory to assess work-related burnout, and the Resilience Scale- 14 to measure resilience levels. Those high on Excitable and Cautious but low on Bold and Reserved were linked to an increased vulnerability to Burnout. Also those high on Bold and Diligent yet low on the Excitable, Cautious, and Imaginative scales were more resilient. Structural Equation Modelling revealed that resilience plays both a mediating and moderating role on personality and burnout. Theoretical implications suggest future research assessing the predictive capacity of psychological variables on burnout should account the indirect effect of resilience.

  19. Effect of young’s modulus on springback for low, medium and high carbon steels during cold drawing of seamless tubes

    Science.gov (United States)

    Karanjule, D. B.; Bhamare, S. S.; Rao, T. H.

    2018-04-01

    Cold drawing is widely used deformation process for seamless tube manufacturing. Springback is one of the major problem faced in tube drawing. Springback is due to the elastic energy stored in the tubes during forming process. It is found that this springback depends upon Young’s modulus of the material. This paper reports mechanical testing of three grades of steels viz. low carbon steel, medium carbon steel and high carbon steel to measure their Young’s modulus and corresponding springback. The results shows that there is 10-20 % variation in the Young’s modulus and inverse proportion between the springback and Young’s modulus. More the percentage of carbon, more the strength, less the value of Young’s modulus and more will springback. The study further leads to identify optimum die semi angle of 15 degree, land width of 10 mm and drawing speed of 8, 6 and 4 m/min for least springback in all the three grades respectively and die semi angle as a most dominant factor causing springback.

  20. FOAMED CEMENT COMPOSITES: DETECTION OF THE MODULUS OF ELASTICITY USING DIC ANALYSIS AND COMPARISON WITH OTHER METHODS

    Directory of Open Access Journals (Sweden)

    Jakub Ďureje

    2017-11-01

    Full Text Available A modulus of elasticity was determined for eight differently foamed cement paste samples. Samples were loaded in the laboratory by a hydraulic press. The force acting on the sample was read directly from the laboratory press. Digital Image Correlation (DIC analysis were used to draw deformations. Before loading pressure test was applied a random contrast pattern to the samples. Samples were captured by the camera in a one-second interval during the loading pressure test. The images were edited in the Adobe Photoshop Lightroom and then evaluated using Ncorr software. The result is a vertical and horizontal shift field. On the basis of the results obtained, it was possible to calculate the modulus of elasticity of each sample.

  1. Mechanical properties of resin-ceramic CAD/CAM restorative materials.

    Science.gov (United States)

    Awada, Abdallah; Nathanson, Dan

    2015-10-01

    The recent development of polymer-based computer-aided design and computer-aided manufactured (CAD/CAM) milling blocks and the limited availability of independent studies on these materials make it pertinent to evaluate their properties and identify potential strengths and limitations. The purpose of this in vitro study was to determine and compare mechanical properties (flexural strength, flexural modulus, modulus of resilience) and compare the margin edge quality of recently introduced polymer-based CAD/CAM materials with some of their commercially available composite resin and ceramic counterparts. The materials studied were Lava Ultimate Restorative (LVU; 3M ESPE), Enamic (ENA; Vita Zahnfabrik), Cerasmart (CES; GC Dental Products), IPS Empress CAD (EMP; Ivoclar Vivadent AG), Vitablocs Mark II (VM2; Vita Zahnfabrik), and Paradigm MZ100 Block (MZ1; 3M ESPE). Polished 4×1×13.5 mm bars (n=25) were prepared from standard-sized milling blocks of each tested material. The bars were subjected to a 3-point flexural test on a 10-mm span with a crosshead speed of 0.5 mm/min. In addition, 42 conventional monolithic crowns (7 per material) were milled. Margin edge quality was observed by means of macrophotography and optical microscopy, providing a qualitative visual assessment and a measurement of existing roughness. The results were analyzed by ANOVA followed by the Tukey HSD test (α=.05). The mean flexural strength of the tested materials ranged from 105 ±9 MPa (VM2) to 219 ±20 MPa (CES). The mean flexural modulus ranged from 8 ±0.25 GPa (CES) to 32 ±1.9 GPa (EMP). The mean modulus of resilience ranged from 0.21 ±0.02 MPa (VM2) to 3.07 ±0.45 MPa (CES). The qualitative assessment of margin edge roughness revealed visible differences among the tested materials, with mean roughness measurements ranging from 60 ±16 μm (CES) to 190 ±15 μm (EMP). The material factor had a significant effect on the mean flexural strength (Pmaterials tested in this study exhibited

  2. Resilience: Building immunity in psychiatry

    Science.gov (United States)

    Shastri, Priyvadan Chandrakant

    2013-01-01

    The challenges in our personal, professional, financial, and emotional world are on rise, more so in developing countries and people will be longing for mental wellness for achieving complete health in their life. Resilience stands for one's capacity to recover from extremes of trauma and stress. Resilience in a person reflects a dynamic union of factors that encourages positive adaptation despite exposure to adverse life experiences. One needs to have a three-dimensional construct for understanding resilience as a state (what is it and how does one identify it?), a condition (what can be done about it?), and a practice (how does one get there?). Evaluating the level of resilience requires the measurement of internal (personal) and external (environmental) factors, taking into account that family and social environment variables of resilience play very important roles in an individual's resilience. Protection factors seem to be more important in the development of resilience than risk factors. Resilience is a process that lasts a lifetime, with periods of acquisition and maintenance, and reduction and loss for assessment. Overall, currently available data on resilience suggest the presence of a neurobiological substrate, based largely on genetics, which correlates with personality traits, some of which are configured via social learning. The major questions about resilience revolve around properly defining the concept, identifying the factors involved in its development and recognizing whether it is actually possible to immunize mental health against adversities. In the clinical field, it may be possible to identify predisposing factors or risk factors for psychopathologies and to develop new intervention strategies, both preventive and therapeutic, based on the concept of resilience. The preferred environments for application of resilience are health, education, and social policy and the right approach in integrating; it can be developed only with more research

  3. Resilience in nurses: an integrative review.

    Science.gov (United States)

    Hart, Patricia L; Brannan, Jane D; De Chesnay, Mary

    2014-09-01

    To describe nursing research that has been conducted to understand the phenomenon of resilience in nurses. Resilience is the ability to bounce back or cope successfully despite adverse circumstances. Nurses deal with modern-day problems that affect their abilities to remain resilient. Nursing administrators/managers need to look for solutions not only to recruit nurses, but to become knowledgeable about how to support and retain nurses. A comprehensive search was undertaken for nursing research conducted between 1990 and 2011. Key search terms were nurse, resilience, resiliency and resilient. Whittemore and Knafl's integrative approach was used to conduct the methodological review. Challenging workplaces, psychological emptiness, diminishing inner balance and a sense of dissonance are contributing factors for resilience. Examples of intrapersonal characteristics include hope, self-efficacy and coping. Cognitive reframing, toughening up, grounding connections, work-life balance and reconciliation are resilience building strategies. This review provides information about the concept of resilience. Becoming aware of contributing factors to the need for resilience and successful strategies to build resilience can help in recruiting and retaining nurses. Understanding the concept of resilience can assist in providing support and developing programmes to help nurses become and stay resilient. © 2012 John Wiley & Sons Ltd.

  4. Resilience in shock and swim stress models of depression

    Directory of Open Access Journals (Sweden)

    Robert Charles Drugan

    2013-02-01

    Full Text Available Experimental models of depression often entail exposing a rodent to a stressor and subsequently characterizing changes in learning and anhedonia, which may reflect symptoms of human depression. Importantly, not all people and not all laboratory rats exposed to stressors develop depressed behavior; these resilient individuals are the focus of our review. Herein we describe research from the learned helplessness and intermittent swim stress models of depression in which rats that were allowed to cope with the stressor appear to be behaviorally and neurochemically similar to rats that were not allowed to cope yet appeared resilient in behavioral tests. For example, rats exposed to inescapable tailshock, but do not develop learned helplessness, exhibit altered sensitivity to the behavioral effects of GABAA receptor antagonists and reduced in vitro benzodiazepine receptor ligand binding. This pattern suggested that resilience might involve activation of an endogenous benzodiazepine-like compound, possibly an allostatic modulator of the GABAA receptor like allopregnanolone. From the intermittent swim stress model, we have observed in resilient rats protection from stressor-induced glucocorticoid increases and immune activation. In order to identify the neural mediators of these correlates of resilience, non-invasive measures are needed to predict the resilient or vulnerable phenotype prior to analysis of neural endpoints. To this end, we found that ultrasonic vocalizations (USVs appear to predict the resilient phenotype in the intermittent swim stress paradigm. We propose that combining non-invasive predictive measures, such as USVs with biological endpoint measures, will facilitate future research into the neural correlates of resilience.

  5. Towards resilient cities. Comparing approaches/strategies

    Directory of Open Access Journals (Sweden)

    Angela Colucci

    2012-07-01

    Full Text Available The term “resilience” is used in many disciplines with different meanings. We will adopt the ecological concept of resilience, which epitomises the capacity of a system to adapt itself in response to the action of a force, achieving a state of equilibrium different from the original (White, 2011. Since the end of the last century, with a significant increase over the last few years, resilience has featured as key concept in many technical, political papers and documents, and appears in many researches. Of all this recent and varied range of literature, our focus is on those texts that combine resilience with strategies, processes and models for resilient cities, communities and regions. Starting from the resilience strategies developed as response for risks mitigation, the paper thus explores other approaches and experiences on cities resilience that have been conducted: the aim is to compare and identify innovation in the planning process towards risks mitigation. In this paper we present a summary of the initial survey stage of our research, with three main aims: understanding the approaches to resilience developed so far and identifying which aspects these approaches share (or not;understanding which strategies are being proposed for resilient regions, cities or social-ecological systems;understanding whether proposed resilience strategies involve innovations in urban and regional development disciplines. The aim is to understand whether the proposed concept of resilience, or rather strategies, constitute progress and contribute to innovation in the areas of urban planning and design in relation to risk mitigation. Three main families of literature have been identified from the recent literature promoting resilience as a key strategy. The first aim of the research is to understand which particular concept and which aspects of resilience are used, which resilience strategies are proposed, how the term ‘city’ is defined and interpreted

  6. Focusing the Meaning(s of Resilience: Resilience as a Descriptive Concept and a Boundary Object

    Directory of Open Access Journals (Sweden)

    Fridolin Simon. Brand

    2007-06-01

    Full Text Available This article reviews the variety of definitions proposed for "resilience" within sustainability science and suggests a typology according to the specific degree of normativity. There is a tension between the original descriptive concept of resilience first defined in ecological science and a more recent, vague, and malleable notion of resilience used as an approach or boundary object by different scientific disciplines. Even though increased conceptual vagueness can be valuable to foster communication across disciplines and between science and practice, both conceptual clarity and practical relevance of the concept of resilience are critically in danger. The fundamental question is what conceptual structure we want resilience to have. This article argues that a clearly specified, descriptive concept of resilience is critical in providing a counterbalance to the use of resilience as a vague boundary object. A clear descriptive concept provides the basis for operationalization and application of resilience within ecological science.

  7. Conceptualizing community resilience to natural hazards – the emBRACE framework

    Directory of Open Access Journals (Sweden)

    S. Kruse

    2017-12-01

    Full Text Available The level of community is considered to be vital for building disaster resilience. Yet, community resilience as a scientific concept often remains vaguely defined and lacks the guiding characteristics necessary for analysing and enhancing resilience on the ground. The emBRACE framework of community resilience presented in this paper provides a heuristic analytical tool for understanding, explaining and measuring community resilience to natural hazards. It was developed in an iterative process building on existing scholarly debates, on empirical case study work in five countries and on participatory consultation with community stakeholders where the framework was applied and ground-tested in different contexts and for different hazard types. The framework conceptualizes resilience across three core domains: (i resources and capacities, (ii actions and (iii learning. These three domains are conceptualized as intrinsically conjoined within a whole. Community resilience is influenced by these integral elements as well as by extra-community forces comprising disaster risk governance and thus laws, policies and responsibilities on the one hand and on the other, the general societal context, natural and human-made disturbances and system change over time. The framework is a graphically rendered heuristic, which through application can assist in guiding the assessment of community resilience in a systematic way and identifying key drivers and barriers of resilience that affect any particular hazard-exposed community.

  8. Understanding individual resilience in the workplace: the international collaboration of workforce resilience model.

    Science.gov (United States)

    Rees, Clare S; Breen, Lauren J; Cusack, Lynette; Hegney, Desley

    2015-01-01

    When not managed effectively, high levels of workplace stress can lead to several negative personal and performance outcomes. Some professional groups work in highly stressful settings and are therefore particularly at risk of conditions such as anxiety, depression, secondary traumatic stress, and burnout. However, some individuals are less affected by workplace stress and the associated negative outcomes. Such individuals have been described as "resilient." A number of studies have found relationships between levels of individual resilience and specific negative outcomes such as burnout and compassion fatigue. However, because psychological resilience is a multi-dimensional construct it is necessary to more clearly delineate it from other related and overlapping constructs. The creation of a testable theoretical model of individual workforce resilience, which includes both stable traits (e.g., neuroticism) as well as more malleable intrapersonal factors (e.g., coping style), enables information to be derived that can eventually inform interventions aimed at enhancing individual resilience in the workplace. The purpose of this paper is to introduce a new theoretical model of individual workforce resilience that includes several intrapersonal constructs known to be central in the appraisal of and response to stressors and that also overlap with the construct of psychological resilience. We propose a model in which psychological resilience is hypothesized to mediate the relationship between neuroticism, mindfulness, self-efficacy, coping, and psychological adjustment.

  9. Resilience As A Mediator Between Affect, Coping Styles, Support and Life Satisfaction

    Directory of Open Access Journals (Sweden)

    Ozlem Kelle

    2018-06-01

    Full Text Available As humans, we are always targets of many positive and negative life events in which we would show differences in dealing with those events. In this study, the aim was to investigate how individuals react to stressful situations through the concept of resilience. Therefore it was aimed to test the role of individual characteristics of affect and coping styles in addition to receiving support from family and social environment on resilience. The role of resilience in life satisfaction was also investigated. A survey was used including demographic questions, ego resilience scale, positive and negative affect scale, stress coping styles inventory, and satisfaction with life scale. Target of the study was individuals who were over 18 years of age and 403 participants were reached through snowball sampling. Seventy six percent of the participants were female (n=310 and 24% of them were male (n=93. Hypothesized model was tested by using path analysis. Study results showed that positive affect, optimistic coping style and confident coping style were significant predictors of resilience as individual characteristics in addition to receiving social support. Resilience was found as a significant predictor of life satisfaction. Moreover, resilience was also found as a significant mediator of the relationships between positive affect, optimistic coping, confident coping styles, receiving social support and life satisfaction. Importance of the study in the field of psychology and suggestions for future research were also discussed with relevant literature.

  10. Compressive Strength and Modulus of Elasticity of Concrete with Cubed Waste Tire Rubbers as Coarse Aggregates

    Science.gov (United States)

    Haryanto, Y.; Hermanto, N. I. S.; Pamudji, G.; Wardana, K. P.

    2017-11-01

    One feasible solution to overcome the issue of tire disposal waste is the use of waste tire rubber to replace aggregate in concrete. We have conducted an experimental investigation on the effect of rubber tire waste aggregate in cuboid form on the compressive strength and modulus of elasticity of concrete. The test was performed on 72 cylindrical specimens with the height of 300 mm and diameter of 150 mm. We found that the workability of concrete with waste tire rubber aggregate has increased. The concrete density with waste tire rubber aggregate was decreased, and so was the compressive strength. The decrease of compressive strength is up to 64.34%. If the content of waste tire rubber aggregate is more than 40%, then the resulting concrete cannot be categorized as structural concrete. The modulus of elasticity decreased to 59.77%. The theoretical equation developed to determine the modulus of elasticity of concrete with rubber tire waste aggregate has an accuracy of 84.27%.

  11. Resilience and (in)security

    DEFF Research Database (Denmark)

    dunn cavelty, myriam; Kaufmann, Mareile; Kristensen, Kristian Søby

    2015-01-01

    , and redefine relations of security and insecurity. We show the increased attention – scholarly as well as political – given to resilience in recent times and provide a review of the state of critical security studies literature on resilience. We argue that to advance this discussion, resilience needs...

  12. Resilience Management System And Development Of Resilience Capability On Site Workers

    OpenAIRE

    Komatsubara, Akinori

    2013-01-01

    When we consider the safety of socio-technical or safety critical systems, discussions from three layers are required; safety strategy, safety management and safety activity. In this study, development of resilience safety from the three layers is discussed. For the safety management layer, this study proposes resilience management system (RMS) as the style of safety management system (SMS) for resilience safety approach. Two cases at Japanese companies to enhance attitude and non-technical s...

  13. Determination of Young's Modulus of Graphene by Raman Spectroscopy

    Science.gov (United States)

    Lee, Jae-Ung; Yoon, Duhee; Cheong, Hyeonsik

    2012-02-01

    The mechanical properties of graphene are interesting research subjects because its Young's modulus and strength are extremely high. Values of ˜1 TPa for the Young's modulus have been reported [Lee et al. Science, 321, 385 (2008), Koenig et al. Nat. Nanotech. 6, 543 (2011)]. We made a graphene sample on a SiO2/Si substrate with closed-bottom holes by mechanical exfoliation. A pressure difference across the graphene membrane was applied by putting the sample in a vacuum chamber. This pressure difference makes the graphene membrane bulge upward like a balloon. By measuring the shifts of the Raman G and 2D bands, we estimated the amount of strain on the graphene membrane. By comparing the strain estimated from the Raman measurements with numerical simulations based on the finite element method, we obtained the Young's modulus of graphene.

  14. Degrees of Resilience: Profiling Psychological Resilience and Prospective Academic Achievement in University Inductees

    Science.gov (United States)

    Allan, John F.; McKenna, Jim; Dominey, Susan

    2014-01-01

    University inductees may be increasingly vulnerable to stressors during transition into higher education (HE), requiring psychological resilience to achieve academic success. This study aimed to profile inductees' resilience and to investigate links to prospective end of year academic outcomes. Scores for resilience were based on a validated…

  15. A Study on Accelerated Thermal Aging of High Modulus Carbon/Epoxy Composite Material

    Directory of Open Access Journals (Sweden)

    Ju Min Kyung

    2015-01-01

    Full Text Available Composite materials have been used increasingly for various space applications due to the favorable characteristic of high modulus to density ratio and potential for near-zero coefficient of thermal expansion. In composite system, depending on the orientation of fibers, strength and stiffness can be changed so that the optimum structure can be accomplished. This is because the coefficient of thermal expansion (CTE of carbon fibers is negative. For spacecraft and orbiting space structure, which are thermally cycled by moving through the earth' shadow for at least 5 years, it is necessary to investigate the change of properties of the material over time. In this study, thermal aging of epoxy matrix/high modulus carbon fiber composite materials are accelerated to predict the long term creep property. Specimens are tested at various temperatures of 100~140°C with dynamic mechanical analysis to obtain creep compliances that are functions of time and temperature. Using Time Temperature Superposition method, creep compliance curves at each temperature are shifted to the reference temperature by shift factor and a master curve is generated at the reference temperature. This information is useful to predict the long term thermal aging of high modulus composite material for spacecraft application.

  16. Temperature Effects on Adhesive Bond Strengths and Modulus for Commonly Used Spacecraft Structural Adhesives

    Science.gov (United States)

    Ojeda, Cassandra E.; Oakes, Eric J.; Hill, Jennifer R.; Aldi, Dominic; Forsberg, Gustaf A.

    2011-01-01

    A study was performed to observe how changes in temperature and substrate material affected the strength and modulus of an adhesive bondline. Seven different adhesives commonly used in aerospace bonded structures were tested. Aluminum, titanium and Invar adherends were cleaned and primed, then bonded using the manufacturer's recommendations. Following surface preparation, the coupons were bonded with the adhesives. The single lap shear coupons were then pull tested per ASTM D 1002 Standard Test Method for Apparent Shear Strength of Single- Lap-Joint over a temperature range from -150 deg C up to +150 deg C. The ultimate strength was calculated and the resulting data were converted into B-basis design allowables. Average and Bbasis results were compared. Results obtained using aluminum adherends are reported. The effects of using different adherend materials and temperature were also studied and will be reported in a subsequent paper. Dynamic Mechanical Analysis (DMA) was used to study variations in adhesive modulus with temperature. This work resulted in a highly useful database for comparing adhesive performance over a wide range of temperatures, and has facilitated selection of the appropriate adhesive for spacecraft structure applications.

  17. Performance Evaluation of Hot Mix Asphalt with Different Proportions of RAP Content

    Science.gov (United States)

    Kamil Arshad, Ahmad; Awang, Haryati; Shaffie, Ekarizan; Hashim, Wardati; Rahman, Zanariah Abd

    2018-03-01

    Reclaimed Asphalt Pavement (RAP) is old asphalt pavement that has been removed from a road by milling or full depth removal. The use of RAP in hot mix asphalt (HMA) eliminates the need to dispose old asphalt pavements and conserves asphalt binders and aggregates, resulting in significant cost savings and benefits to society. This paper presents a study on HMA with different RAP proportions carried out to evaluate the volumetric properties and performance of asphalt mixes containing different proportions of RAP. Marshall Mix Design Method was used to produce control mix (0% RAP) and asphalt mixes containing 15% RAP, 25% RAP and 35% RAP in accordance with Specifications for Road Works of Public Works Department, Malaysia for AC14 dense graded asphalt gradation. Volumetric analysis was performed to ensure that the result is compliance with specification requirements. The resilient modulus test was performed to measure the stiffness of the mixes while the Modified Lottman test was conducted to evaluate the moisture susceptibility of these mixes. The Hamburg wheel tracking test was used to evaluate the rutting performance of these mixes. The results obtained showed that there were no substantial difference in Marshall Properties, moisture susceptibility, resilient modulus and rutting resistance between asphalt mixes with RAP and the control mix. The test results indicated that recycled mixes performed as good as the performance of conventional HMA in terms of moisture susceptibility and resilient modulus. It is recommended that further research be carried out for asphalt mixes containing more than 35% RAP material.

  18. Performance Evaluation of Hot Mix Asphalt with Different Proportions of RAP Content

    Directory of Open Access Journals (Sweden)

    Kamil Arshad Ahmad

    2018-01-01

    Full Text Available Reclaimed Asphalt Pavement (RAP is old asphalt pavement that has been removed from a road by milling or full depth removal. The use of RAP in hot mix asphalt (HMA eliminates the need to dispose old asphalt pavements and conserves asphalt binders and aggregates, resulting in significant cost savings and benefits to society. This paper presents a study on HMA with different RAP proportions carried out to evaluate the volumetric properties and performance of asphalt mixes containing different proportions of RAP. Marshall Mix Design Method was used to produce control mix (0% RAP and asphalt mixes containing 15% RAP, 25% RAP and 35% RAP in accordance with Specifications for Road Works of Public Works Department, Malaysia for AC14 dense graded asphalt gradation. Volumetric analysis was performed to ensure that the result is compliance with specification requirements. The resilient modulus test was performed to measure the stiffness of the mixes while the Modified Lottman test was conducted to evaluate the moisture susceptibility of these mixes. The Hamburg wheel tracking test was used to evaluate the rutting performance of these mixes. The results obtained showed that there were no substantial difference in Marshall Properties, moisture susceptibility, resilient modulus and rutting resistance between asphalt mixes with RAP and the control mix. The test results indicated that recycled mixes performed as good as the performance of conventional HMA in terms of moisture susceptibility and resilient modulus. It is recommended that further research be carried out for asphalt mixes containing more than 35% RAP material.

  19. Foundations of resilience thinking.

    Science.gov (United States)

    Curtin, Charles G; Parker, Jessica P

    2014-08-01

    Through 3 broad and interconnected streams of thought, resilience thinking has influenced the science of ecology and natural resource management by generating new multidisciplinary approaches to environmental problem solving. Resilience science, adaptive management (AM), and ecological policy design (EPD) contributed to an internationally unified paradigm built around the realization that change is inevitable and that science and management must approach the world with this assumption, rather than one of stability. Resilience thinking treats actions as experiments to be learned from, rather than intellectual propositions to be defended or mistakes to be ignored. It asks what is novel and innovative and strives to capture the overall behavior of a system, rather than seeking static, precise outcomes from discrete action steps. Understanding the foundations of resilience thinking is an important building block for developing more holistic and adaptive approaches to conservation. We conducted a comprehensive review of the history of resilience thinking because resilience thinking provides a working context upon which more effective, synergistic, and systems-based conservation action can be taken in light of rapid and unpredictable change. Together, resilience science, AM, and EPD bridge the gaps between systems analysis, ecology, and resource management to provide an interdisciplinary approach to solving wicked problems. © 2014 Society for Conservation Biology.

  20. Midwives׳ experiences of workplace resilience.

    Science.gov (United States)

    Hunter, Billie; Warren, Lucie

    2014-08-01

    many UK midwives experience workplace adversity resulting from a national shortage of midwives, rise in birth rate and increased numbers of women entering pregnancy with complex care needs. Research evidence suggests that workplace pressures, and the emotional demands of the job, may increase midwives׳ experience of stress and contribute to low morale, sickness and attrition. Much less is known about midwives who demonstrate resilience in the face of adversity. Resilience has been investigated in studies of other health and social care workers, but there is a gap in knowledge regarding midwives׳ experiences. to explore clinical midwives׳ understanding and experience of professional resilience and to identify the personal, professional and contextual factors considered to contribute to or act as barriers to resilience. an exploratory qualitative descriptive study. In Stage One, a closed online professional discussion group was conducted over a one month period. Midwives discussed workplace adversity and their resilient responses to this. In Stage Two, the data were discussed with an Expert Panel with representatives from midwifery workforce and resilience research, in order to enhance data interpretation and refine the concept modelling. the online discussion group was hosted by the Royal College of Midwives, UK online professional networking hub: 'Communities'. 11 practising midwives with 15 or more years of 'hands on clinical experience', and who self-identified as being resilient, took part in the online discussion group. thematic analysis of the data identified four themes: challenges to resilience, managing and coping, self-awareness and building resilience. The participants identified 'critical moments' in their careers when midwives were especially vulnerable to workplace adversity. Resilience was seen as a learned process which was facilitated by a range of coping strategies, including accessing support and developing self-awareness and protection of self

  1. Resilience among Military Youth

    Science.gov (United States)

    Easterbrooks, M. Ann; Ginsburg, Kenneth; Lerner, Richard M.

    2013-01-01

    In this article, the authors present their approach to understanding resilience among military connected young people, and they discuss some of the gaps in their knowledge. They begin by defining resilience, and then present a theoretical model of how young people demonstrate resilient functioning. Next they consider some of the research on…

  2. MSY from catch and resilience

    DEFF Research Database (Denmark)

    Jørgensen, Ole A; Chrysafi, Anna

    A simple Schaefer model was tested on the Greenland halibut stock offshore in NAFO SA 0 and 1. The minimum data required for this model is a catch time series and a measure of the resilience of the species. Other input parameters that had to be guessed were the carrying capacity, the biomass...

  3. Investigating the Relationships Among Resilience, Social Anxiety, and Procrastination in a Sample of College Students.

    Science.gov (United States)

    Ko, Chen-Yi Amy; Chang, Yuhsuan

    2018-01-01

    This study investigated the relationships among resilience, social anxiety, and procrastination in a sample of college students. Specifically, structural equation modeling analyses were applied to examine the effect of resilience on procrastination and to test the mediating effect of social anxiety. The results of this study suggested that social anxiety partially mediated the relationship between resilience and procrastination. Students with higher levels of resilience reported a lower frequency of procrastination behavior, and resilience had an indirect effect on procrastination through social anxiety. The results of this study clarify the current knowledge of the mixed results on resilience and procrastination behaviors and offer practical learning strategies and psychological interventions.

  4. Determining shear modulus of thin wood composite materials using a cantilever beam vibration method

    Science.gov (United States)

    Cheng Guan; Houjiang Zhang; John F. Hunt; Haicheng Yan

    2016-01-01

    Shear modulus (G) of thin wood composite materials is one of several important indicators that characterizes mechanical properties. However, there is not an easy method to obtain this value. This study presents the use of a newly developed cantilever beam free vibration test apparatus to detect in-plane G of thin wood composite...

  5. Analysis of Beams with Transversal Gradations of the Young's Modulus and Variable Depths by the Meshless Method

    Directory of Open Access Journals (Sweden)

    Sátor Ladislav

    2014-03-01

    Full Text Available A numerical analysis based on the meshless local Petrov- Galerkin (MLPG method is proposed for a functionally graded material FGM (FGMfunctionally graded material beam. The planar bending of the beam is considered with a transversal gradation of Young's modulus and a variable depth of the beam. The collocation formulation is constructed from the equilibrium equations for the mechanical fields. Dirac's delta function is employed as a test function in the derivation of a strong formulation. The Moving Least Squares (MLS approximation technique is applied for an approximation of the spatial variations of all the physical quantities. An investigation of the accuracy, the convergence of the accuracy, the computational efficiency and the effect of the level of the gradation of Young's modulus on the behaviour of coupled mechanical fields is presented in various boundary value problems for a rectangular beam with a functionally graded Young's modulus.

  6. Determination of Rock Mass Modulus Using the Plate Loading Method at Yucca Mountain, Nevada

    International Nuclear Information System (INIS)

    Finley, R.E.; George, J.T.; Riggins, M.

    1999-01-01

    A suite of plate loading tests has recently been conducted by Sandia National Laboratories at the Exploratory Studies Facility at Yucca Mountain, Nevada. Fielding of these in situ tests as well as other approaches undertaken for the determination of rock mass modulus are described. The various methodologies are evaluated and their data compared. Calculation by existing empirical methods and numerical modeling are compared to each other as well as to field data

  7. Building from a conceptual model of the resilience process during ageing, towards the Groningen Aging Resilience Inventory

    NARCIS (Netherlands)

    van Abbema, Renske; Bielderman, Annemiek; De Greef, Mathieu; Hobbelen, Hans; Krijnen, Wim; van der Schans, Cees

    Aim. To develop and psychometrically test the Groningen Ageing Resilience Inventory. Background. Ageing is a process that is often accompanied by functional limitation, disabilities and losses. Instead of focusing on these negative events of ageing, there are opportunities in focusing on adaptation

  8. Emotion Regulation Ability and Resilience in a Sample of Adolescents from a Suburban Area

    Directory of Open Access Journals (Sweden)

    José M. Mestre

    2017-11-01

    Full Text Available Earlier research has identified a remarkable number of related factors to resilience during adolescence. Historically, theoretical treatments of resilience have been focused almost exclusively on psychosocial levels of analysis to derive explanatory models. However, there is insufficient understanding of the role of emotion regulation explaining competent functioning despite the experience of adversity (resilience, especially during adolescence. This study explores the relationship between both, emotional regulation abilities and strategies, and resilience in a sample of adolescents from suburbs high-schools (Jerez de la Frontera, Spain. The study also examines how using different emotional regulation strategies may help the development of resilience levels at this stage. Participants of the study were 164 adolescents ranging from 13 to 16 years old (M = 13.98; SD = 0.66. Emotion regulation was measured using the Cognitive Emotional Regulation Questionnaire (CERQ, Garnefski et al., 2001, and sections D and H of Mayer-Salovey-Caruso Emotional Intelligence Test, a performance test (Emotion Regulation Ability sections, MSCEIT, Spanish version, Mayer et al., 2003. Resilience was evaluated with ERE (Educative Resilience Scale for children and adolescents, Saavedra and Castro, 2009. Verbal Intelligence (Yuste, 1997 and personality traits (Cattell and Cattell, 1986 were assessed as two independent variables. Results supported the idea that emotion regulation ability (MSCEIT, D and H sections, Extremera et al., 2006 is a significant predictor of adolescents' resilience. Moreover, cognitive regulation strategies, such as positive reappraisal, predicted perceived resilience among students. Sociability (A factor of HSPQ, sociability also correlated with resilience levels. Hence, these results are promising, implying that emotion regulation ability may act as a helpful tool preventing adolescents from irrational risky behaviors, commonly assumed at this

  9. Geometrical modulus of a casting and its influence on solidification process

    Directory of Open Access Journals (Sweden)

    F. Havlicek

    2011-10-01

    Full Text Available Object: The work analyses the importance of the known criterion for evaluating the controlled solidification of castings, so called geometrical modulus defined by N. Chvorinov as the first one. Geometrical modulus influences the solidification process. The modulus has such specificity that during the process of casting formation it is not a constant but its initial value decreases with the solidification progress because the remaining melt volume can decrease faster than its cooling surface.Methodology: The modulus is determined by a simple calculation from the ratio of the casting volume after pouring the metal in the mould to the cooled mould surface. The solidified metal volume and the cooled surface too are changed during solidification. That calculation is much more complicated. Results were checked up experimentally by measuring the temperatures in the cross-section of heavy steel castings during cooling them.Results: The given experimental results have completed the original theoretical calculations by Chvorinov and recent researches done with use of numerical calculations. The contribution explains how the geometrical modulus together with the thermal process in the casting causes the higher solidification rate in the axial part of the casting cross-section and shortening of solidification time. Practical implications: Change of the geometrical modulus negatively affects the casting internal quality. Melt feeding by capillary filtration in the dendritic network in the casting central part decreases and in such a way the shrinkage porosity volume increases. State of stress character in the casting is changed too and it increases.

  10. Ultrasound estimation and FE analysis of elastic modulus of Kelvin foam

    International Nuclear Information System (INIS)

    Kim, Nohyu; Yang, Seung Yong

    2016-01-01

    The elastic modulus of a 3D-printed Kelvin foam plate is investigated by measuring the acoustic wave velocity of 1 MHz ultrasound. An isotropic tetrakaidecahedron foam with 3 mm unit cell is designed and printed layer upon layer to fabricate a Kelvin foam plate of 14 mm thickness with a 3D CAD/printer using ABS plastic. The Kelvin foam plate is completely filled with paraffin wax for impedance matching, so that the acoustic wave may propagate through the porous foam plate. The acoustic wave velocity of the foam plate is measured using the time-of-flight (TOF) method and is used to calculate the elastic modulus of the Kelvin foam plate based on acousto-elasticity. Finite element method (FEM) and micromechanics is applied to the Kelvin foam plate to calculate the theoretical elastic modulus using a non-isotropic tetrakaidecahedron model. The predicted elastic modulus of the Kelvin foam plate from FEM and micromechanics model is similar, which is only 3-4% of the bulk material. The experimental value of the elastic modulus from the ultrasonic method is approximately twice as that of the numerical and theoretical methods because of the flexural deformation of the cell edges neglected in the ultrasonic method

  11. Ultrasound estimation and FE analysis of elastic modulus of Kelvin foam

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Nohyu; Yang, Seung Yong [School of Mechatronics Engineering, Korea University of Technology and Education, Cheonan (Korea, Republic of)

    2016-02-15

    The elastic modulus of a 3D-printed Kelvin foam plate is investigated by measuring the acoustic wave velocity of 1 MHz ultrasound. An isotropic tetrakaidecahedron foam with 3 mm unit cell is designed and printed layer upon layer to fabricate a Kelvin foam plate of 14 mm thickness with a 3D CAD/printer using ABS plastic. The Kelvin foam plate is completely filled with paraffin wax for impedance matching, so that the acoustic wave may propagate through the porous foam plate. The acoustic wave velocity of the foam plate is measured using the time-of-flight (TOF) method and is used to calculate the elastic modulus of the Kelvin foam plate based on acousto-elasticity. Finite element method (FEM) and micromechanics is applied to the Kelvin foam plate to calculate the theoretical elastic modulus using a non-isotropic tetrakaidecahedron model. The predicted elastic modulus of the Kelvin foam plate from FEM and micromechanics model is similar, which is only 3-4% of the bulk material. The experimental value of the elastic modulus from the ultrasonic method is approximately twice as that of the numerical and theoretical methods because of the flexural deformation of the cell edges neglected in the ultrasonic method.

  12. The Resilient Schools Consortium (RiSC): Linking Climate Literacy, Resilience Thinking and Service Learning

    Science.gov (United States)

    Branco, B. F.; Fano, E.; Adams, J.; Shon, L.; Zimmermann, A.; Sioux, H.; Gillis, A.

    2017-12-01

    Public schools and youth voices are largely absent from climate resilience planning and projects in New York City. Additionally, research shows that U.S. science teachers' understanding of climate science is lacking, hence there is not only an urgent need to train and support teachers on both the science and pedagogy of climate change, but to link climate literacy, resilience thinking and service learning in K-12 education. However, research on participation of students and teachers in authentic, civic-oriented experiences points to increased engagement and learning outcomes in science. The Resilient Schools Consortium (RiSC) Project will address all these needs through an afterschool program in six coastal Brooklyn schools that engages teachers and urban youth (grades 6-12), in school and community climate resilience assessment and project design. The RiSC climate curriculum, co-designed by New York City school teachers with Brooklyn College, the National Wildlife Federation, New York Sea Grant and the Science and Resilience Institute at Jamaica Bay, will begin by helping students to understand the difference between climate and weather. The curriculum makes extensive use of existing resources such as NOAA's Digital Coast and the Coastal Resilience Mapping Portal. Through a series of four modules over two school years, the six RiSC teams will; 1. explore and understand the human-induced drivers of climate change and, particularly, the significant climate and extreme weather related risks to their schools and surrounding communities; 2. complete a climate vulnerability assessment within the school and the community that is aligned to OneNYC - the city's resilience planning document; 3. design and execute a school-based resilience project; and 4. propose resilience guidelines for NYC Department of Education schools. At the end of each school year, the six RiSC teams will convene a RiSC summit with city officials and resilience practitioners to share ideas and

  13. A decreased subchondral trabecular bone tissue elastic modulus is associated with pre-arthritic cartilage damage

    DEFF Research Database (Denmark)

    Day, J; Ding, Ming; van der Linden, JC

    2001-01-01

    determined using a combination of finite element models and mechanical testing. The bone tissue modulus was reduced by 60% in the medial condyle of the cases with cartilage damage compared to the control specimens. Neither the presence of cartilage damage nor the anatomic site (medial vs. lateral) affected...

  14. Assessing resilience in adolescence: the Spanish adaptation of the Adolescent Resilience Questionnaire.

    Science.gov (United States)

    Guilera, Georgina; Pereda, Noemí; Paños, Ana; Abad, Judit

    2015-07-11

    The concept and assessment of resilience have attracted considerable attention in recent years, but none of the instruments developed to measure resilience in adolescents have been adapted to the Spanish context. The Adolescent Resilience Questionnaire (ARQ) provides a comprehensive and multidimensional assessment of the resources associated with resilience in adolescents. This study analyzes the psychometric properties of the ARQ. Participants included a community sample of 1101 Spanish adolescents (53.5 % boys) aged 12-17 years (M = 14.51; SD = 1.755). Results confirm the factor structure based on 12 scales. Internal consistency was generally adequate (between .60 and .84), although the unacceptable coefficient for the Empathy/Tolerance scale (α = .38) means that this scale needs to be revised for the Spanish context. Relationships between ARQ scales and psychopathology were in the expected direction and magnitude. Some gender differences were observed, with higher scores for boys on Confidence and Negative cognition. The Spanish version of the ARQ can help to identify personal characteristics associated with resilience and signs of positive engagement with family, peers, school, and the community. It can identify those adolescents most likely to show resilience in response to adversity, as well as those who may be vulnerable under situations of stress.

  15. Examining Young's modulus for wood

    International Nuclear Information System (INIS)

    Perkalskis, Benjamin S; Freeman, J Reuben; Suhov, Alexander

    2004-01-01

    Symmetry considerations, dimensional analysis and simple approximations are used to derive a formula for Young's modulus of a simple anisotropic system, a straight-layer wood bar whose fibre axis makes an angle with respect to the bar's longitudinal axis. Agreement between the derived formula and experiment (carried out in far from ideal conditions) is within 10%. Improvements and extensions are suggested for this undergraduate physics experiment

  16. Temperature, Frequency and Young’s Modulus of a Wineglass

    Directory of Open Access Journals (Sweden)

    Amitta Miller

    2015-01-01

    Full Text Available A crystal soda-lime wineglass, heated to temperatures ranging from 25 °C to 150 °C, was tapped and the frequency recorded. It was shown that the relative change in the frequency at different temperatures can be used to determine the effect of temperature on Young’s Modulus of the glass. This simple method of tapping a wineglass is proposed as an effective way of determining the relative effect of temperature on Young’ Modulus of glass.

  17. Resilience Design Patterns: A Structured Approach to Resilience at Extreme Scale

    International Nuclear Information System (INIS)

    Engelmann, Christian; Hukerikar, Saurabh

    2017-01-01

    Reliability is a serious concern for future extreme-scale high-performance computing (HPC) systems. Projections based on the current generation of HPC systems and technology roadmaps suggest the prevalence of very high fault rates in future systems. While the HPC community has developed various resilience solutions, application-level techniques as well as system-based solutions, the solution space remains fragmented. There are no formal methods and metrics to integrate the various HPC resilience techniques into composite solutions, nor are there methods to holistically evaluate the adequacy and efficacy of such solutions in terms of their protection coverage, and their performance \\& power efficiency characteristics. Additionally, few of the current approaches are portable to newer architectures and software environments that will be deployed on future systems. In this paper, we develop a structured approach to the design, evaluation and optimization of HPC resilience using the concept of design patterns. A design pattern is a general repeatable solution to a commonly occurring problem. We identify the problems caused by various types of faults, errors and failures in HPC systems and the techniques used to deal with these events. Each well-known solution that addresses a specific HPC resilience challenge is described in the form of a pattern. We develop a complete catalog of such resilience design patterns, which may be used by system architects, system software and tools developers, application programmers, as well as users and operators as essential building blocks when designing and deploying resilience solutions. We also develop a design framework that enhances a designer's understanding the opportunities for integrating multiple patterns across layers of the system stack and the important constraints during implementation of the individual patterns. It is also useful for defining mechanisms and interfaces to coordinate flexible fault management across

  18. Thickness dependence of nanofilm elastic modulus

    Czech Academy of Sciences Publication Activity Database

    Fedorchenko, Alexander I.; Wang, A. B.; Cheng, H.H.

    2009-01-01

    Roč. 94, č. 15 (2009), s. 152111-152113 ISSN 0003-6951 Institutional research plan: CEZ:AV0Z20760514 Keywords : nanofilm * elastic modulus * thickness dependence Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.554, year: 2009 http://link.aip.org/link/?APPLAB/94/152111/1

  19. Resilient Rotterdam. Climate change as a challenge. Report of a workshop

    International Nuclear Information System (INIS)

    Wardekker, J.A.; De Jong, A.; Van der Sluijs, J.P.

    2008-12-01

    The objective of the study of the resilience of Rotterdam (the Netherlands) with regard to climate change is twofold: 1) to obtain insight in the concepts resilience and uncertainty; to gain insight in how a resilience oriented approach deals with uncertainties about the future; and (2) putting the resilience oriented approach into operation in a case: the area outside the dike of Rotterdam, the Netherlands, which is designated for new buildings. The objective of the workshop was manifold: Making a small inventory of problems that could arise in the area outside the dike of Rotterdam caused by climate change; thinking about working out the 'resilience approach' in concrete options for climate change adaptation in this area; making an inventory of knowledge questions that come from the people that are involved in the design of the area; applying, testing and assessing a number of 'frame-based methods' for structural thinking about such issues [nl

  20. Estimation of Bulk modulus and microhardness of tetrahedral semiconductors

    International Nuclear Information System (INIS)

    Gorai, Sanjay Kumar

    2012-01-01

    A general empirical formula was found for calculating of bulk modulus (B) and microhardness (H) from electronegativity and principal quantum number of II-VI, III-V semiconductors. Constant C1, appearing the in the expression of bulk modulus and constants C2 and C3, appearing in the expression of microhardness and the exponent M have following values respectively The numerical values of C1,C2, C3 and M are respectively 206.6, 8.234, 1.291, -1.10 for II-VI 72.4, 31.87, 7.592, -0.95 for III-V semiconductors. Both electro-negativity and principal quantum number can effectively reflect on the chemical bonding behaviour of constituent atoms in these semiconductors. The calculated values of bulk modulus and microhardness are in good agreement with the reported values in the literature. Present study helps in designing novel semiconductor materials, and to further explore the mechanical properties of these semiconductors.

  1. RF design and tests on a broadband, high-power coaxial quadrature hybrid applicable to ITER ICRF transmission line system for load-resilient operations

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hae Jin, E-mail: haejin@nfri.re.kr [National Fusion Research Institute, Daejeon (Korea, Republic of); Wang, Son Jong; Park, Byoung Ho; Kwak, Jong-Gu [National Fusion Research Institute, Daejeon (Korea, Republic of); Hillairet, Julien [CEA/IRFM, Saint-lez-Durance (France); Choi, Jin Joo [Kwangwoon University, Seoul (Korea, Republic of)

    2015-10-15

    Highlights: • Amplitude balanced 3 dB coaxial hybrid splitter has been designed and rf tested. • The proposed hybrid is applicable to ITER ICRF transmission line for load resilience. • Two-section, broadband coaxial hybrid can be tunable by changing dielectric insulator. - Abstract: RF design and network analyzer tests of broadband, amplitude-balanced coaxial hybrid junctions are presented. We have designed two 3 dB hybrid splitters with 9 and 12 in. coaxial transmission lines applicable to ITER ICRF for load-resilient operations using ANSYS HFSS. Amplitude-balanced broadband responses were obtained with the combination of impedance reductions of longitudinal and transverse branches in unequal proportion, length change of 50 Ω lines and diameter change of high impedance lines connected transversely to the T-section of the hybrid splitter, respectively. We have fabricated and RF tested the 9 in. coaxial hybrid coupler. We obtained an excellent coupling flatness of −3.2 ± 0.2 dB, phase difference of 4 degrees and return loss of 16 dB in 40–55 MHz. The measured data of 9 in. hybrid splitter is highly consistent with HFSS simulations. We found that the proposed 3 dB hybrid splitter can be tunable with amplitude-balanced, broadband response by changing dielectric insulators to keep the inner and outer conductors of coaxial line apart. The proposed 3 dB hybrid splitter can be utilized for load-resilient operations in a wide range of antenna load variations due to mode transitions or edge localized modes (ELMs) in fusion plasmas.

  2. RF design and tests on a broadband, high-power coaxial quadrature hybrid applicable to ITER ICRF transmission line system for load-resilient operations

    International Nuclear Information System (INIS)

    Kim, Hae Jin; Wang, Son Jong; Park, Byoung Ho; Kwak, Jong-Gu; Hillairet, Julien; Choi, Jin Joo

    2015-01-01

    Highlights: • Amplitude balanced 3 dB coaxial hybrid splitter has been designed and rf tested. • The proposed hybrid is applicable to ITER ICRF transmission line for load resilience. • Two-section, broadband coaxial hybrid can be tunable by changing dielectric insulator. - Abstract: RF design and network analyzer tests of broadband, amplitude-balanced coaxial hybrid junctions are presented. We have designed two 3 dB hybrid splitters with 9 and 12 in. coaxial transmission lines applicable to ITER ICRF for load-resilient operations using ANSYS HFSS. Amplitude-balanced broadband responses were obtained with the combination of impedance reductions of longitudinal and transverse branches in unequal proportion, length change of 50 Ω lines and diameter change of high impedance lines connected transversely to the T-section of the hybrid splitter, respectively. We have fabricated and RF tested the 9 in. coaxial hybrid coupler. We obtained an excellent coupling flatness of −3.2 ± 0.2 dB, phase difference of 4 degrees and return loss of 16 dB in 40–55 MHz. The measured data of 9 in. hybrid splitter is highly consistent with HFSS simulations. We found that the proposed 3 dB hybrid splitter can be tunable with amplitude-balanced, broadband response by changing dielectric insulators to keep the inner and outer conductors of coaxial line apart. The proposed 3 dB hybrid splitter can be utilized for load-resilient operations in a wide range of antenna load variations due to mode transitions or edge localized modes (ELMs) in fusion plasmas.

  3. Zoogeomorphology and resilience theory

    Science.gov (United States)

    Butler, David R.; Anzah, Faisal; Goff, Paepin D.; Villa, Jennifer

    2018-03-01

    Zoogeomorphology, the study of animals as geomorphic agents, has been largely overlooked in the context of resilience theory and biogeomorphic systems. In this paper, examples are provided of the interactions between external landscape disturbances and zoogeomorphological agents. We describe cases in which naturally occurring zoogeomorphological agents occupy a landscape, and examine whether those zoogeomorphic agents provide resilience to a landscape or instead serve as a landscape stress capable of inducing a phase-state shift. Several cases are described whereby the presence of exotic (introduced) zoogeomorphic agents overwhelms a landscape and induce collapse. The impact of climate change on species with zoogeomorphological importance is discussed in the context of resilience of a landscape. We conclude with a summary diagram illustrating the relationships existing between zoogeomorphic impacts and landscape resilience in the context of our case studies, and speculate about the future of the study of zoogeomorphology in the framework of resilience theory.

  4. A two-crown finite element technique for the determination of tearing modulus

    International Nuclear Information System (INIS)

    Suo, X.Z.; Combescure, A.

    1989-01-01

    The importance of approach to the subject of crack instability for the design of structures containing cracks has increased considerably over the last few years. The tearing modulus theory recently enunciated by Paris and co-workers has emerged as one of the leading criterions for stable crack growth and for instability, and the estimation of T termed Tearing modulus in the theory has since been extensively investigated theoretically as well as experimentally. Analytical methods exist for calculating the tearing modulus of various crack configurations in simple-shaped structures under certain loading conditions. However, for arbitrary structures under general loading, more sophisticated calculation techniques are required. Extending the virtual crack extension method introduced independently by Hellen and Parks, a new numerical approach for calculating the tearing modulus is presented hereafter and put in a form suitable for the instability analysis of structures containing one single crack or several interacting cracks. As it is well-known that the calculation of the energy release rate in elasticity by the virtual crack extension method is related to a stiffness derivative to which only a small region around the crack tip has a contribution, the technique described in the paper shows that it would be reasonable to evaluate the tearing modulus, or rather, the second derivative of potential energy with respect to the crack length, by means of two stiffness derivative calculations in two crowns around the crack tip. In particular, when one crown is strictly included in another one, computation is largely curtailed at this point with some saving of computer time, but a very accurate value of tearing modulus is obtained. As an interesting consequence, an another expression of the tearing modulus is carried out. In Section 4: the classical tearing modulus is proved to be precisely equivalent to a line integral which is independent of integration path. Numerical example

  5. Tiered Approach to Resilience Assessment.

    Science.gov (United States)

    Linkov, Igor; Fox-Lent, Cate; Read, Laura; Allen, Craig R; Arnott, James C; Bellini, Emanuele; Coaffee, Jon; Florin, Marie-Valentine; Hatfield, Kirk; Hyde, Iain; Hynes, William; Jovanovic, Aleksandar; Kasperson, Roger; Katzenberger, John; Keys, Patrick W; Lambert, James H; Moss, Richard; Murdoch, Peter S; Palma-Oliveira, Jose; Pulwarty, Roger S; Sands, Dale; Thomas, Edward A; Tye, Mari R; Woods, David

    2018-04-25

    Regulatory agencies have long adopted a three-tier framework for risk assessment. We build on this structure to propose a tiered approach for resilience assessment that can be integrated into the existing regulatory processes. Comprehensive approaches to assessing resilience at appropriate and operational scales, reconciling analytical complexity as needed with stakeholder needs and resources available, and ultimately creating actionable recommendations to enhance resilience are still lacking. Our proposed framework consists of tiers by which analysts can select resilience assessment and decision support tools to inform associated management actions relative to the scope and urgency of the risk and the capacity of resource managers to improve system resilience. The resilience management framework proposed is not intended to supplant either risk management or the many existing efforts of resilience quantification method development, but instead provide a guide to selecting tools that are appropriate for the given analytic need. The goal of this tiered approach is to intentionally parallel the tiered approach used in regulatory contexts so that resilience assessment might be more easily and quickly integrated into existing structures and with existing policies. Published 2018. This article is a U.S. government work and is in the public domain in the USA.

  6. Young's modulus of defective graphene sheet from intrinsic thermal vibrations

    International Nuclear Information System (INIS)

    Thomas, Siby; Mrudul, M S; Ajith, K M; Valsakumar, M C

    2016-01-01

    Classical molecular dynamics simulations have been performed to establish a relation between thermally excited ripples and Young's modulus of defective graphene sheet within a range of temperatures. The presence of the out-of-plane intrinsic ripples stabilizes the graphene membranes and the mechanical stability is analyzed by means of thermal mean square vibration amplitude in the long wavelength regime. We observed that the presence of vacancy and Stone-Wales (SW) defects reduces the Young's modulus of graphene sheets. Graphene sheet with vacancy defects possess superior Young's modulus to that of a sheet with Stone-Wales defects. The obtained room temperature Young's modulus of pristine and defective graphene sheet is ∼ 1 TPa, which is comparable to the results of earlier experimental and atomistic simulation studies. (paper)

  7. Reframing Resilience: Pilot Evaluation of a Program to Promote Resilience in Marginalized Older Adults

    Science.gov (United States)

    Fullen, Matthew C.; Gorby, Sean R.

    2016-01-01

    Resilience has been described as a paradigm for aging that is more inclusive than models that focus on physiological and functional abilities. We evaluated a novel program, Resilient Aging, designed to influence marginalized older adults' perceptions of their resilience, self-efficacy, and wellness. The multiweek group program incorporated an…

  8. Short cellulosic fiber/starch acetate composites — micromechanical modeling of Young’s modulus

    DEFF Research Database (Denmark)

    Madsen, Bo; Joffe, Roberts; Peltola, Heidi

    2011-01-01

    This study is presented to predict the Young’s modulus of injection-molded short cellulosic fiber/plasticized starch acetate composites with variable fiber and plasticizer content. A modified rule of mixtures model is applied where the effect of porosity is included, and where the fiber weight...... (density and Young’s modulus). The measured Young’s modulus of the composites varies in the range 1.1—8.3 GPa, and this is well predicted by the model calculations. A property diagram is presented to be used for the tailor-making of composites with Young’s modulus in the range 0.2—10 GPa....

  9. On the common modulus attack into the LUC4,6 cryptosystem

    Science.gov (United States)

    Wong, Tze Jin; Said, Mohd Rushdan Md; Othman, Mohamed; Koo, Lee Feng

    2015-05-01

    The LUC4,6 cryptosystem is a system analogy with RSA cryptosystem and extended from LUC and LUC3 cryptosystems. The process of encryption and decryption are derived from the fourth order linear recurrence sequence and based on Lucas function. This paper reports an investigation into the common modulus attack on the LUC4,6 cryptosystem. In general, the common modulus attack will be succeeded if the sender sends the plaintext to two users used same RSA-modulus and both of encryption keys of them are relatively prime to each other. However, based on the characteristics of high order Lucas sequence, the LUC4,6 cryptosystem is unattackable

  10. Resilience linked to personality dimensions, alexithymia and affective symptoms in motor functional neurological disorders.

    Science.gov (United States)

    Jalilianhasanpour, Rozita; Williams, Benjamin; Gilman, Isabelle; Burke, Matthew J; Glass, Sean; Fricchione, Gregory L; Keshavan, Matcheri S; LaFrance, W Curt; Perez, David L

    2018-04-01

    Reduced resilience, a construct associated with maladaptive stress coping and a predisposing vulnerability for Functional Neurological Disorders (FND), has been under-studied compared to other neuropsychiatric factors in FND. This prospective case-control study investigated self-reported resilience in patients with FND compared to controls and examined relationships between resilience and affective symptoms, personality traits, alexithymia, health status and adverse life event burden. 50 individuals with motor FND and 47 healthy controls participated. A univariate test followed by a logistic regression analysis investigated group-level differences in Connor-Davidson Resilience Scale (CD-RISC) scores. For within-group analyses performed separately in patients with FND and controls, univariate screening tests followed by multivariate linear regression analyses examined factors associated with self-reported resilience. Adjusting for age, gender, education status, ethnicity and lifetime adverse event burden, patients with FND reported reduced resilience compared to controls. Within-group analyses in patients with FND showed that individual-differences in mental health, extraversion, conscientiousness, and openness positively correlated with CD-RISC scores; post-traumatic stress disorder symptom severity, depression, anxiety, alexithymia and neuroticism scores negatively correlated with CD-RISC scores. Extraversion independently predicted resilience scores in patients with FND. In control subjects, univariate associations were appreciated between CD-RISC scores and gender, personality traits, anxiety, alexithymia and physical health; conscientiousness independently predicted resilience in controls. Patients with FND reported reduced resilience, and CD-RISC scores covaried with other important predisposing vulnerabilities for the development of FND. Future research should investigate if the CD-RISC is predictive of clinical outcomes in patients with FND. Copyright

  11. Bisphosphonate treatment affects trabecular bone apparent modulus through micro-architecture rather than matrix properties

    DEFF Research Database (Denmark)

    Ding, Ming

    2004-01-01

    and trabecular architecture independently. Conventional histomorphometry and microdamage data were obtained from the second and third lumbar vertebrae of the same dogs [Bone 28 (2001) 524]. Bisphosphonate treatment resulted in an increased apparent Young's modulus, decreased bone turnover, increased calcified...... matrix density, and increased microdamage. We could not detect any change in the effective Young's modulus of the calcified matrix in the bisphosphonate treated groups. The observed increase in apparent Young's modulus was due to increased bone mass and altered trabecular architecture rather than changes...... in the calcified matrix modulus. We hypothesize that the expected increase in the Young's modulus of the calcified matrix due to the increased calcified matrix density was counteracted by the accumulation of microdamage. Udgivelsesdato: 2004 May...

  12. Characterization of multilayer nitride coatings by electron microscopy and modulus mapping

    International Nuclear Information System (INIS)

    Pemmasani, Sai Pramod; Rajulapati, Koteswararao V.; Ramakrishna, M.; Valleti, Krishna; Gundakaram, Ravi C.; Joshi, Shrikant V.

    2013-01-01

    This paper discusses multi-scale characterization of physical vapour deposited multilayer nitride coatings using a combination of electron microscopy and modulus mapping. Multilayer coatings with a triple layer structure based on TiAlN and nanocomposite nitrides with a nano-multilayered architecture were deposited by Cathodic arc deposition and detailed microstructural studies were carried out employing Energy Dispersive Spectroscopy, Electron Backscattered Diffraction, Focused Ion Beam and Cross sectional Transmission Electron Microscopy in order to identify the different phases and to study microstructural features of the various layers formed as a result of the deposition process. Modulus mapping was also performed to study the effect of varying composition on the moduli of the nano-multilayers within the triple layer coating by using a Scanning Probe Microscopy based technique. To the best of our knowledge, this is the first attempt on modulus mapping of cathodic arc deposited nitride multilayer coatings. This work demonstrates the application of Scanning Probe Microscopy based modulus mapping and electron microscopy for the study of coating properties and their relation to composition and microstructure. - Highlights: • Microstructure of a triple layer nitride coating studied at multiple length scales. • Phases identified by EDS, EBSD and SAED (TEM). • Nanolayered, nanocomposite structure of the coating studied using FIB and TEM. • Modulus mapping identified moduli variation even in a nani-multilayer architecture

  13. The effect of compressive stress on the Young's modulus of unirradiated and irradiated nuclear graphites

    International Nuclear Information System (INIS)

    Oku, T.; Usui, T.; Ero, M.; Fukuda, Y.

    1977-01-01

    The Young's moduli of unirradiated and high temperature (800 to 1000 0 C) irradiated graphites for HTGR were measured by the ultrasonic method in the direction of applied compressive stress during and after stressing. The Young's moduli of all the tested graphites decreased with increasing compressive stress both during and after stressing. In order to investigate the reason for the decrease in Young's modulus by applying compressive stress, the mercury pore diameter distributions of a part of the unirradiated and irradiated specimens were measured. The change in pore distribution is believed to be associated with structural changes produced by irradiation and compressive stressing. The residual strain, after removing the compressive stress, showed a good correlation with the decrease in Young's modulus caused by the compressive stress. The decrease in Young's modulus by applying compressive stress was considered to be due to the increase in the mobile dislocation density and the growth or formation of cracks. The results suggest, however, that the mechanism giving the larger contribution depends on the brand of graphite, and in anisotropic graphite it depends on the direction of applied stress and the irradiation conditions. (author)

  14. A Six-Week Resistance Training Program Does Not Change Shear Modulus of the Triceps Brachii.

    Science.gov (United States)

    Akagi, Ryota; Shikiba, Tomofumi; Tanaka, Jun; Takahashi, Hideyuki

    2016-08-01

    We investigated the effect of a 6-week resistance training program on the shear modulus of the triceps brachii (TB). Twenty-three young men were randomly assigned to either the training (n = 13) or control group (n = 10). Before and after conducting the resistance training program, the shear modulus of the long head of the TB was measured at the point 70% along the length of the upper arm from the acromial process of the scapula to the lateral epicondyle of the humerus using shear wave ultrasound elastography. Muscle thickness of the long head of the TB was also determined at the same site by ultrasonography used during both tests. A resistance exercise was performed 3 days a week for 6 weeks using a dumbbell mass-adjusted to 80% of the 1-repetition maximum (1RM). The training effect on the muscle thickness and 1RM was significant. Nevertheless, the muscle shear modulus was not significantly changed after the training program. From the perspective of muscle mechanical properties, the present results indicate that significant adaptation must occur to make the TB more resistant to subsequent damaging bouts during the 6-week training program to target the TB.

  15. Determination of Lubricant Bulk Modulus in Metal Forming by Means of a Simple Laboratory Test and Inverse FEM Analysis

    DEFF Research Database (Denmark)

    Hafis, S. M.; Christiansen, P.; Martins, P. A. F.

    2016-01-01

    The influence of workpiece surface topography on friction, lubrication and final surface equality in metal forming operations is well known and has been pointed out by many researchers.This is especially the case when liquid lubricants are applied in situations, where increased surface roughness ...... couples lubricant flow with plastic deformation of the metal directly. Results show that the proposed procedure allows determining an approximate bulk modulus for the lubricant.......The influence of workpiece surface topography on friction, lubrication and final surface equality in metal forming operations is well known and has been pointed out by many researchers.This is especially the case when liquid lubricants are applied in situations, where increased surface roughness...... facilitates the lubricant entrainment, pressurization and possible escape by micro-plasto-hydrodynamic lubrication. In order to model these mechanisms an important lubricant propertyd esignated as the bulk modulus is needed for characterizing the compressibility of the lubricant. The present paper describes...

  16. Characterization of the Young's modulus and residual stresses for a sputtered silicon oxynitride film using micro-structures

    International Nuclear Information System (INIS)

    Dong, Jian; Du, Ping; Zhang, Xin

    2013-01-01

    Silicon oxynitride (SiON) is an important material to fabricate micro-electro-mechanical system (MEMS) devices due to its composition-dependent tunability in electronic and mechanical properties. In this work, the SiON film with 41.45% silicon, 32.77% oxygen and 25.78% nitrogen content was deposited by RF magnetron sputtering. Two types of optimized micro-structures including micro-cantilevers and micro-rotating-fingers were designed and fabricated using MEMS surface micromachining technology. The micro-cantilever bending tests were conducted using a nanoindenter to characterize the Young's modulus of the SiON film. Owing to the elimination of the residual stress effect on the micro-cantilever structure, higher accuracy in the Young's modulus was achieved from this technique. With the information of Young's modulus of the film, the residual stresses were characterized from the deflection of the micro-rotating-fingers. This structure was able to locally measure a large range of tensile or compressive residual stresses in a thin film with sufficient sensitivities. The results showed that the Young's modulus of the SiON film was 122 GPa and the residual stresses of the SiON film were 327 MPa in the crystallographic orientation of the wafer and 334 MPa in the direction perpendicular to the crystallographic orientation, both in compression. This work presents a comprehensive methodology to measure the Young's modulus and residual stresses of a thin film with improved accuracy, which is promising for applications in mechanical characterization of MEMS devices. - Highlight: • We measured the Young's modulus and residual stress of SiON film by microstructure. • Micro cantilever structure improved the Young's modulus' measurement accuracy. • We explored the reason for the deviations of residual stress value of SiON film

  17. Influence of various factors on the Young modulus of metals

    International Nuclear Information System (INIS)

    Drapkin, B.M.

    1980-01-01

    The equivalence of temperature and pressure effects in the elastic area on the Young modulus of different metals (Ni, Mo, W, Na, Fe and ets.) is established on the basis of the analysis of literature and calculated data. It is shown that the value of the change in the Young modulus of the alloy is connected with mutual arrangement of alloy components in the periodic system of elements

  18. Performance of Hot Mix Asphalt Mixture Incorporating Kenaf Fibre

    Science.gov (United States)

    Hainin, M. R.; Idham, M. K.; Yaro, N. S. A.; Hussein, S. O. A. E.; Warid, M. N. M.; Mohamed, A.; Naqibah, S. N.; Ramadhansyah, P. J.

    2018-04-01

    Kenaf fibre has been recognised to increase the strength of concrete, but its application in asphalt concrete is still unanswered. This research investigated the performance of Hot Mix Asphalt (HMA) incorporated with different percentages of kenaf fibre (0.1 %, 0.2% and 0.3% by weight of dry aggregate) in term of resilient modulus, rutting performance using Asphalt Pavement analyser (APA) and moisture damage using the Modified Lottman test (AASHTO-T283). The fibre was interweaved to a diameter of about 5-10 mm and length of 30 mm which is three times the nominal maximum aggregate size used in the mix. Asphaltic mixtures of asphalt concrete (AC) 10 were prepared and compacted using Marshall compactor which were subsequently tested to evaluate the resilient modulus and moisture susceptibility. Twelve cylindrical specimens (150mm diameter) from AC10, two control samples with two modified ones for each percentage of kenaf fibres compacted using Gyratory compactor were used for rutting test using APA. The laboratory results reveal that the addition of kenaf fibres slightly reduce the resilient modulus of the mixes and that asphaltic mix with 0.3% kenaf fibre can mitigate both rutting and moisture damage which makes the pavement more sustain to the loads applied even in the presence of water. 0.3% kenaf fibre content is considered to be the optimal content which had the least rut depth and the highest TSR of 81.07%. Based on grid analysis, addition of 0.3% kenaf fibre in asphaltic concrete was recommended in modifying the samples.

  19. Effect of single-particle magnetostriction on the shear modulus of compliant magnetoactive elastomers

    Science.gov (United States)

    Kalita, Viktor M.; Snarskii, Andrei A.; Shamonin, Mikhail; Zorinets, Denis

    2017-03-01

    The influence of an external magnetic field on the static shear strain and the effective shear modulus of a magnetoactive elastomer (MAE) is studied theoretically in the framework of a recently introduced approach to the single-particle magnetostriction mechanism [V. M. Kalita et al., Phys. Rev. E 93, 062503 (2016), 10.1103/PhysRevE.93.062503]. The planar problem of magnetostriction in an MAE with magnetically soft inclusions in the form of a thin disk (platelet) having the magnetic anisotropy in the plane of this disk is solved analytically. An external magnetic field acts with torques on magnetic filler particles, creates mechanical stresses in the vicinity of inclusions, induces shear strain, and increases the effective shear modulus of these composite materials. It is shown that the largest effect of the magnetic field on the effective shear modulus should be expected in MAEs with soft elastomer matrices, where the shear modulus of the matrix is less than the magnetic anisotropy constant of inclusions. It is derived that the effective shear modulus is nonlinearly dependent on the external magnetic field and approaches the saturation value in magnetic fields exceeding the field of particle anisotropy. It is shown that model calculations of the effective shear modulus correspond to a phenomenological definition of effective elastic moduli and magnetoelastic coupling constants. The obtained theoretical results compare well with known experimental data. Determination of effective elastic coefficients in MAEs and their dependence on magnetic field is discussed. The concentration dependence of the effective shear modulus at higher filler concentrations has been estimated using the method of Padé approximants, which predicts that both the absolute and relative changes of the magnetic-field-dependent effective shear modulus will significantly increase with the growing concentration of filler particles.

  20. Reliability and validity of the korean version of the connor-davidson resilience scale.

    Science.gov (United States)

    Baek, Hyun-Sook; Lee, Kyoung-Uk; Joo, Eun-Jeong; Lee, Mi-Young; Choi, Kyeong-Sook

    2010-06-01

    The Connor-Davidson Resilience Scale (CD-RISC) measures various aspects of psychological resilience in patients with posttraumatic stress disorder (PTSD) and other psychiatric ailments. This study sought to assess the reliability and validity of the Korean version of the Connor-Davidson Resilience Scale (K-CD-RISC). In total, 576 participants were enrolled (497 females and 79 males), including hospital nurses, university students, and firefighters. Subjects were evaluated using the K-CD-RISC, the Beck Depression Inventory (BDI), the Impact of Event Scale-Revised (IES-R), the Rosenberg Self-Esteem Scale (RSES), and the Perceived Stress Scale (PSS). Test-retest reliability and internal consistency were examined as a measure of reliability, and convergent validity and factor analysis were also performed to evaluate validity. Cronbach's alpha coefficient and test-retest reliability were 0.93 and 0.93, respectively. The total score on the K-CD-RISC was positively correlated with the RSES (r=0.56, preliability and validity for measurement of resilience among Korean subjects.

  1. Children's resilience and trauma-specific cognitive behavioral therapy: Comparing resilience as an outcome, a trait, and a process.

    Science.gov (United States)

    Happer, Kaitlin; Brown, Elissa J; Sharma-Patel, Komal

    2017-11-01

    Resilience, which is associated with relatively positive outcomes following negative life experiences, is an important research target in the field of child maltreatment (Luthar et al., 2000). The extant literature contains multiple conceptualizations of resilience, which hinders development in research and clinical utility. Three models emerge from the literature: resilience as an immediate outcome (i.e., behavioral or symptom response), resilience as a trait, and resilience as a dynamic process. The current study compared these models in youth undergoing trauma-specific cognitive behavioral therapy. Results provide the most support for resilience as a process, in which increase in resilience preceded associated decrease in posttraumatic stress and depressive symptoms. There was partial support for resilience conceptualized as an outcome, and minimal support for resilience as a trait. Results of the models are compared and discussed in the context of existing literature and in light of potential clinical implications for maltreated youth seeking treatment. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Modelling and Enhancement of Organizational Resilience Potential in Process Industry SMEs

    Directory of Open Access Journals (Sweden)

    Slavko Arsovski

    2015-12-01

    Full Text Available The business environment is rapidly changing and puts pressure on enterprises to find effective ways to survive and develop. Since it is almost impossible to identify the multitude of complex conditions and business risks, an organization has to build its resilience in order to be able to overcome issues and achieve long term sustainability. This paper contributes by establishing a two-step model for assessment and enhancement of organizational resilience potential oriented towards Small and Medium Enterprises (SMEs in the process industry. Using a dynamic modelling technique and statistical tools, a sample of 120 SMEs in Serbia has been developed as a testing base, and one randomly selected enterprise was used for model testing and verification. Uncertainties regarding the relative importance of organizational resilience potential factors (ORPFs and their value at each level of business are described by pre-defined linguistic expressions. The calculation of the relative importance of ORPFs for each business level is stated as a fuzzy group decision making problem. First, the weighted ORPFs’ values and resilience potential at each business level are determined. In the second step, near optimal enhancement of ORPFs’ values is achieved by applying a genetic algorithm (GA.

  3. Determining the complex modulus of alginate irreversible hydrocolloid dental material.

    Science.gov (United States)

    King, Shalinie; See, Howard; Thomas, Graham; Swain, Michael

    2008-11-01

    The aim of the study is to investigate the visco-elastic response of an alginate irreversible hydrocolloid dental impression material during setting. A novel squeeze film Micro-Fourier Rheometer (MFR, GBC Scientific Equipment, Australia) was used to determine the complex modulus of an alginate irreversible hydrocolloid dental impression material (Algident, ISO 1563 Class A Type 1, Dentalfarm Australia Pty. Ltd.) during setting after mixing. Data was collected every 30s for 10 min in one study and every 10 min for a total of 60 min in another study. A high level of repeatability was observed. The results indicate that the MFR is capable of recording the complex shear modulus of alginate irreversible hydrocolloid for 60 min from the start of mixing and to simultaneously report the changing visco-elastic parameters at all frequencies between 1 Hz and 100 Hz. The storage modulus shows a dramatic increase to 370% of its starting value after 6 min and then reduces to 55% after 60 min. The loss modulus increases to a maximum of 175% of its starting value after 10 min and then reduces to 94% after 60 min. The MFR enables the changes in the complex modulus through the complete setting process to be followed. It is anticipated this approach may provide a better method to compare the visco-elastic properties of impression materials and assist with identification of optimum types for different clinical requirements. The high stiffness of the instrument and the use of band-limited pseudo-random noise as the input signal are the main advantages of this technique over conventional rheometers for determining the changes in alginate visco-elasticity.

  4. Resiliência e maus-tratos à criança Resilience and child abuse

    Directory of Open Access Journals (Sweden)

    Maria de Fátima Pinheiro da Silva Junqueira

    2003-02-01

    Full Text Available O artigo propõe discutir o conceito de resiliência a partir de uma revisão crítica. Foram priorizados textos produzidos por órgãos que têm um papel direcionador no campo da saúde da criança e do adolescente (OPAS - Organização Pan-Americana da Saúde; ASBRA - Associação Brasileira de Adolescência. Discute-se as principais definições de resiliência. São debatidas as contribuições e limitações das leituras vigentes. Debate-se ainda, as possibilidades conceituais e operativas da resiliência frente às situações de maus-tratos contra criança e adolescente, tomando o exemplo do abuso sexual intrafamiliar. Conclui-se que o conceito de resiliência apresenta polarizações em torno de certos eixos: "adaptação/superação", "inato/adquirido", "permanente/circunstancial". Contudo, ele aponta para um ponto comum: a singularidade e a delicadeza das relações microssociais de promoção em saúde.The article discusses the resilience concept from a critical review. It prioritizes texts produced by organizations with leading roles in the field of child and adolescent health (PAHO, Pan-American Health Organization; ASBRA, the Brazilian Association for Adolescence. The main definitions of resilience are discussed, along with a debate on the contributions and limitations of the current literature. Furthermore, the conceptual and operative possibilities of resilience when confronted with child abuse are discussed, specifically using intra-familial sexual abuse as an example. The authors conclude that the concept of resilience presents polarization around certain axes: "adaptation/overcoming process", "innate/acquired", "permanent/circumstantial". However, they all point to a common ground: the singularity and delicacy of micro-social health-promoting relationships.

  5. Assessing the outcomes of school-based partnership resilience ...

    African Journals Online (AJOL)

    Through a concurrent mixed-methods research design interpreted through a ... resilience in relation to educational psychology-rural school intervention. ... The data analysis techniques consist of descriptive statistics and t-tests on the sampled ...

  6. The Resilient Brain

    Science.gov (United States)

    Brendtro, Larry K.; Longhurst, James E.

    2005-01-01

    Brain research opens new frontiers in working with children and youth experiencing conflict in school and community. Blending this knowledge with resilience science offers a roadmap for reclaiming those identified as "at risk." This article applies findings from resilience research and recent brain research to identify strategies for reaching…

  7. Warrior Resilience Training in Operation Iraqi Freedom: combining rational emotive behavior therapy, resiliency, and positive psychology.

    Science.gov (United States)

    Jarrett, Thomas

    2008-01-01

    Warrior Resilience Training (WRT) is an educational class designed to enhance Warrior resilience, thriving, and posttraumatic growth for Soldiers deployed in Operation Iraqi Freedom. Warrior Resilience Training uses rational emotive behavior therapy (REBT), Army leadership principles, and positive psychology as a vehicle for students to apply resilient philosophies derived from Army Warrior Ethos, Stoic philosophy, and the survivor and resiliency literature. Students in WRT are trained to focus upon virtue, character, and emotional self-regulation by constructing and maintaining a personal resiliency philosophy that emphasizes critical thinking, rationality, virtue, and Warrior Ethos. The author, an Army licensed clinical social worker, executive coach, REBT doctoral fellow, and former Special Forces noncommissioned officer, describes his initial experience teaching WRT during Operation Iraqi Freedom to combat medics and Soldiers from 2005 to 2006, and his experience as a leader of a combat stress control prevention team currently in Iraq offering mobile WRT classes in-theater. Warrior Resilience Training rationale, curriculum, variants (like Warrior Family Resilience Training), and feedback are included, with suggestions as to how behavioral health providers and combat stress control teams might better integrate their services with leaders, chaplains, and commands to better market combat stress resiliency, reduce barriers to care, and promote force preservation. Informal analysis of class feedback from 1168 respondents regarding WRT reception and utilization is examined.

  8. The Relationship Between Psychological Resilience and Life Satisfaction of University Academic Staff

    Directory of Open Access Journals (Sweden)

    Gamze ÜLKER TÜMLÜ

    2013-12-01

    Full Text Available The aim of this study is to examine the relationship between academic staff psychological resilience and life satisfaction. The research is a descriptive study in relational survey model. The study group includes 94 faculty members chosen randomly in 2011-2012 academic years in Kastamonu University. As a data collection instruments, life satisfaction scale developed by Diener et al in 1985, adapted to Turkish by Köker in 1991 and Connor and Davidson Resilience Scale/CD-RISC developed by Connor and Davidson in 2003, adapted to Turkish by Karaırmak in 2010, were used. In the study correlation method was used in order to determine the relationship between resilience and life satisfaction, regression analysis was used in order to determine whether the resilience predict life satisfaction. In addition, Mann-Whitney U and Kruskal-Wallis H tests were used in the analysis of resilience in terms of age, gender, marital status, degree, years of service and years of service at the university in the study. When the outcomes were evaluated, a significant, positive relationship was found between life satisfaction and resilience. The psychological resilience predicts life satisfaction in a meaningful way and resilience explains 7% of the total variance about life satisfaction. In addition, resilience levels of the university academic staff does not differ meaningfully from the gender, age, marital status, degree, years of service and years of service at university.

  9. Access and Resilience: Analyzing the Construction of Social Resilience to the Threat of Water Scarcity

    Directory of Open Access Journals (Sweden)

    Ruth Langridge

    2006-12-01

    Full Text Available Resilience is a vital attribute that characterizes a system's capacity to cope with stress. Researchers have examined the measurement of resilience in ecosystems and in social-ecological systems, and the comparative vulnerability of social groups. Our paper refocuses attention on the processes and relations that create social resilience. Our central proposition is that the creation of social resilience is linked to a community's ability to access critical resources. We explore this proposition through an analysis of how community resilience to the stress of water scarcity is influenced by historically contingent mechanisms to gain, control, and maintain access to water. Access is defined broadly as the ability of a community to actually benefit from a resource, and includes a wider range of relations than those derived from property rights alone. We provide a framework for assessing the construction of social resilience and use it to examine, first, the different processes and relations that enabled four communities in northern California to acquire access to water, and second, how access contributed to their differential levels of resilience to potential water scarcity. Legal water rights are extremely difficult to alter, and given the variety of mechanisms that can generate access, our study suggests that strengthening and diversifying a range of structural and relational mechanisms to access water can enhance a community's resilience to water scarcity.

  10. Young's modulus of a copper-stabilized niobium-titanium superconductive wire

    International Nuclear Information System (INIS)

    Ledbetter, H.M.; Moulder, J.C.; Austin, M.W.

    1980-01-01

    Young's modulus was determined for a 0.6-mm-dia niobium-titanium superconductive wire. Two methods were used: continuous-wave-resonance and laser-pulse-excitation. Young's moduli were also determined for the components - copper and Nb-Ti - in both wire and bulk forms. Some mechanical-deformation effects on Young's modulus were also measured. From the component' elastic moduli, that of the composite was predicted accurately by a simple rule-of-mixtures relationship

  11. How Resilience Works.

    Science.gov (United States)

    Coutu, Diane L.

    2002-01-01

    Looks at coping skills that carry people through life and why some have them and others do not. Suggests that resilience is a reflex, a way of facing and understanding the world, and that resilient people and companies face reality with staunchness, make meaning out of hardship, and improvise. (JOW)

  12. Formal aspects of resilience

    Directory of Open Access Journals (Sweden)

    Diana-Maria Drigă

    2015-12-01

    Full Text Available The concept of resilience has represented during the recent years a leading concern both in Romania, within the European Union and worldwide. Specialists in economics, management, finance, legal sciences, political sciences, sociology, psychology, grant a particular interest to this concept. Multidisciplinary research of resilience has materialized throughout the time in multiple conceptualizations and theorizing, but without being a consensus between specialists in terms of content, specificity and scope. Through this paper it is intended to clarify the concept of resilience, achieving an exploration of the evolution of this concept in ecological, social and economic environment. At the same time, the paper presents aspects of feedback mechanisms and proposes a formalization of resilience using the logic and mathematical analysis.

  13. Understanding Individual Resilience in the Workplace: The International Collaboration of Workforce Resilience (ICWR Model

    Directory of Open Access Journals (Sweden)

    Clare Samantha Rees

    2015-02-01

    Full Text Available When not managed effectively, high levels of workplace stress can lead to several negative personal and performance outcomes. Some professional groups work in highly stressful settings and are therefore particularly at risk of conditions such as anxiety, depression, secondary traumatic stress and burnout. However, some individuals are less affected by workplace stress and the associated negative outcomes. Such individuals have been described as ‘resilient’. A number of studies have found relationships between levels of individual resilience and specific negative outcomes such as burnout and compassion fatigue. However, because psychological resilience is a multi-dimensional construct it is necessary to more clearly delineate it from other related and overlapping constructs. The creation of a testable theoretical model of individual workforce resilience, which includes both stable traits (e.g. neuroticism as well as more malleable intrapersonal factors (e.g. coping style, enables information to be derived that can eventually inform interventions aimed at enhancing individual resilience in the workplace. The purpose of this paper is to introduce a new theoretical model of individual workforce resilience that includes several intrapersonal constructs known to be central in the appraisal of and response to stressors and that also overlap with the construct of psychological resilience. We propose a model in which psychological resilience is hypothesised to mediate the relationship between neuroticism, mindfulness, self-efficacy, coping and psychological adjustment.

  14. Structural relaxation monitored by instantaneous shear modulus

    DEFF Research Database (Denmark)

    Olsen, Niels Boye; Dyre, Jeppe; Christensen, Tage Emil

    1998-01-01

    time definition based on a recently proposed expression for the relaxation time, where G [infinity] reflects the fictive temperature. All parameters entering the reduced time were determined from independent measurements of the frequency-dependent shear modulus of the equilibrium liquid....

  15. Introduction 'Governance for Drought Resilience'

    NARCIS (Netherlands)

    Bressers, Nanny; Bressers, Johannes T.A.; Larrue, Corinne; Bressers, Hans; Bressers, Nanny; Larrue, Corinne

    2016-01-01

    This book is about governance for drought resilience. But that simple sentence alone might rouse several questions. Because what do we mean with drought, and how does that relate to water scarcity? And what do we mean with resilience, and why is resilience needed for tackling drought? And how does

  16. Resiliency against stress among athletes

    Directory of Open Access Journals (Sweden)

    Kamila Litwic-Kaminska

    2015-10-01

    Full Text Available Background The aim of this paper is to describe the results of a study concerning the relationship between resiliency and appraisal of a stressful situation, anxiety reactions and undertaken methods of coping among sportsmen. Participants and procedure The research concerned 192 competitors who actively train in one of the Olympic disciplines – individual or team. We used the following instruments: Resiliency Assessment Scale (SPP-25; Stress Appraisal Questionnaire A/B; Reactions to Competition Questionnaire; Coping Inventory for Stressful Situations (CISS; Sport Stress Coping Strategies Questionnaire (SR3S, self-constructed. Results Athletes most frequently apply positive types of stress appraisal, and they cope with stress through a task-oriented style during competitions. There is a relationship between the level of resiliency and the analysed aspects of the process of stress. The higher the resiliency, the more positive is the appraisal of a stressful situation and the more task-oriented are the strategies applied. Similarly, in everyday situations resilient sportspeople positively appraise difficult situations and undertake mostly task-oriented strategies. Resiliency is connected with less frequently experiencing reactions in the form of anxiety. Conclusions The obtained results, similarly to previous research, suggest that resiliency is connected with experiencing positive emotions. It causes more frequent appraisal of stressful situations as a challenge. More resilient people also choose more effective and situation-appropriate coping strategies. Therefore they are more resistant to stress.

  17. Effective elastic modulus of isolated gecko setal arrays.

    Science.gov (United States)

    Autumn, K; Majidi, C; Groff, R E; Dittmore, A; Fearing, R

    2006-09-01

    Conventional pressure sensitive adhesives (PSAs) are fabricated from soft viscoelastic materials that satisfy Dahlquist's criterion for tack with a Young's modulus (E) of 100 kPa or less at room temperature and 1 Hz. In contrast, the adhesive on the toes of geckos is made of beta-keratin, a stiff material with E at least four orders of magnitude greater than the upper limit of Dahlquist's criterion. Therefore, one would not expect a beta-keratin structure to function as a PSA by deforming readily to make intimate molecular contact with a variety of surface profiles. However, since the gecko adhesive is a microstructure in the form of an array of millions of high aspect ratio shafts (setae), the effective elastic modulus (E(eff)) is much lower than E of bulk beta-keratin. In the first test of the E(eff) of a gecko setal adhesive, we measured the forces resulting from deformation of isolated arrays of tokay gecko (Gekko gecko) setae during vertical compression, and during tangential compression at angles of +45 degrees and -45 degrees . We tested the hypothesis that E(eff) of gecko setae falls within Dahlquist's criterion for tack, and evaluated the validity of a model of setae as cantilever beams. Highly linear forces of deformation under all compression conditions support the cantilever model. E(eff) of setal arrays during vertical and +45 degrees compression (along the natural path of drag of the setae) were 83+/-4.0 kPa and 86+/-4.4 kPa (means +/- s.e.m.), respectively. Consistent with the predictions of the cantilever model, setae became significantly stiffer when compressed against the natural path of drag: E(eff) during -45 degrees compression was 110+/-4.7 kPa. Unlike synthetic PSAs, setal arrays act as Hookean elastic solids; setal arrays function as a bed of springs with a directional stiffness, assisting alignment of the adhesive spatular tips with the contact surface during shear loading.

  18. Natural asphalt modified binders used for high stiffness modulus asphalt concrete

    Science.gov (United States)

    Bilski, Marcin; Słowik, Mieczysław

    2018-05-01

    This paper presents a set of test results supporting the possibility of replacing, in Polish climate conditions, hard road 20/30 penetration grade bitumen used in the binder course and/or base course made of high stiffness modulus asphalt concrete with binders comprising of 35/50 or 50/70 penetration grade bitumens and additives in the form of natural Gilsonite or Trinidad Epuré asphalts. For the purpose of comparing the properties of the discussed asphalt binders, values of the Performance Grade have been determined according to the American Superpave system criteria.

  19. Communal resilience: the Lebanese case

    Directory of Open Access Journals (Sweden)

    Eric BOUTIN

    2015-07-01

    Full Text Available In a turbulent and aggressive environment, organizations are subject to external events. They are sometimes destabilized and can disappear. This context explains the multiplication of works studying resilience of human organizations. Resilience is then defined as the ability of the organization studied to face an external shock.This paper proposes a state of the art of resilience concept and considers the interests of the transposition of the concept to the field of a territorial community. A case study will lead us to apply the concept of resilience to the Lebanese nation.

  20. Practical Leakage-Resilient Symmetric Cryptography

    DEFF Research Database (Denmark)

    Faust, Sebastian; Pietrzak, Krzysztof; Schipper, Joachim

    2012-01-01

    Leakage resilient cryptography attempts to incorporate side-channel leakage into the black-box security model and designs cryptographic schemes that are provably secure within it. Informally, a scheme is leakage-resilient if it remains secure even if an adversary learns a bounded amount of arbitr......Leakage resilient cryptography attempts to incorporate side-channel leakage into the black-box security model and designs cryptographic schemes that are provably secure within it. Informally, a scheme is leakage-resilient if it remains secure even if an adversary learns a bounded amount...

  1. Community Resilience to Militant Islamism: Who and What?: An Explorative Study of Resilience in Three Danish Communities

    DEFF Research Database (Denmark)

    Dalgaard-Nielsen, Anja; Schack, Patrick

    2016-01-01

    of resilience to militant Islamism in three Danish communities. It shows how families and trust-based networks, including local government, are the major sources of resilience, but also how punitive national policies and discourses work at cross purposes with resilience-building by reducing local actors......Building community resilience to violent extremism increasingly figures as a goal in national security strategies and debates. The exact meaning of resilience remains unclear, complicating an informed discussion of whom and what to support. This article presents findings from an explorative study...

  2. [Evaluation of depressive symptoms and resilience in patients on pharmacotherapeutic follow-up].

    Science.gov (United States)

    Gomes, N C; Abrão, P H O; Fernandes, M R; Beijo, L A; Marques, L A M

    This study aimed to carry out the pharmacotherapeutic follow-up of patients with depression and to assess its impact on the resilience of the patients. Patients were followed-up for 8 months. The pharmacist evaluated depressive symptoms, resilience, and the need for pharmaceutical intervention. The measurement tools used were the Dader method, PHQ-9, and a resilience scale. Data were analysed using BioStat 5.0 software and the performing of the Wilcoxon and Pearson correlation tests. There was a reduction in the rate of depressive symptoms from 12.9 to 5.2 (P<.0001), and an increase in the resilience score from 112.4 to 149.0 (P<.0001). Pharmaceutical interventions were made to resolve the drug related problems in the form of oral communication between pharmacist-patient or pharmacist-patient-doctor. The pharmaceutical care was effective in decreasing depression and contributed to the increased resilience of patients. Copyright © 2017 SECA. Publicado por Elsevier España, S.L.U. All rights reserved.

  3. Room temperature Young's modulus, shear modulus, Poisson's ratio and hardness of PbTe-PbS thermoelectric materials

    Energy Technology Data Exchange (ETDEWEB)

    Ni, Jennifer E [Chemical Engineering and Materials Science Department, Michigan State University, East Lansing, MI 48824 (United States); Case, Eldon D., E-mail: casee@egr.msu.edu [Chemical Engineering and Materials Science Department, Michigan State University, East Lansing, MI 48824 (United States); Khabir, Kristen N; Stewart, Ryan C [Chemical Engineering and Materials Science Department, Michigan State University, East Lansing, MI 48824 (United States); Wu, Chun-I; Hogan, Timothy P [Electrical and Computer Engineering Department, Michigan State University, East Lansing, MI 48824 (United States); Timm, Edward J [Mechanical Engineering Department, Michigan State University, East Lansing, MI 48824 (United States); Girard, Steven N; Kanatzidis, Mercouri G [Department of Chemistry, Northwestern University, Evanston, IL (United States)

    2010-06-15

    Two-phase PbTe-PbS materials, in which PbS is a nanostructured phase, are promising thermoelectric materials for the direct conversion of heat energy into electricity. In this study, a Vickers indentation mean hardness of 1.18 {+-} 0.09 GPa was measured for hot pressed specimens Pb{sub 0.95}Sn{sub 0.05}Te-PbS 8% while the mean hardness of cast specimens was 0.68 {+-} 0.07 GPa. The mean fracture toughness of the not pressed specimens was estimated as 0.35 {+-} 0.04 MPa m{sup 1/2} via Vickers indentation. Resonant Ultrasound Spectroscopy (RUS) measurements on hot pressed specimens gave mean values of Young's modulus, shear modulus and Poisson's ratio of 53.1 GPa, 21.4 GPa and 0.245, respectively while for the cast specimens the Young's and shear moduli were about 10% lower than for the hot pressed, with a mean value of Poisson's ratio of 0.245. The differences between the hardness and elastic moduli values for the cast and hot pressed specimens are discussed.

  4. Aligning Organizational Pathologies and Organizational Resilience Indicators

    Directory of Open Access Journals (Sweden)

    Manuel Morales Allende

    2017-07-01

    Full Text Available Developing resilient individuals, organizations and communities is a hot topic in the research agenda in Management, Ecology, Psychology or Engineering. Despite the number of works that focus on resilience is increasing, there is not completely agreed definition of resilience, neither an entirely formal and accepted framework. The cause may be the spread of research among different fields. In this paper, we focus on the study of organizational resilience with the aim of improving the level of resilience in organizations. We review the relation between viable and resilient organizations and their common properties. Based on these common properties, we defend the application of the Viable System Model (VSM to design resilient organizations. We also identify the organizational pathologies defined applying the VSM through resilience indicators. We conclude that an organization with any organizational pathology is not likely to be resilient because it does not fulfill the requirements of viable organizations.

  5. Young modulus and internal friction of a fiber-reinforced composite

    International Nuclear Information System (INIS)

    Ledbetter, H.M.; Lei, M.; Austin, M.W.

    1986-01-01

    By a kilohertz-frequency resonance method we determined the Young modulus and internal friction of a uniaxially fiber-reinforced composite. The composite comprised glass fibers in an epoxy-resin matrix. We studied three fiber contents: 0, 41, and 49 vol %. The Young modulus fit a linear rule of mixture. The internal friction fit a classical free-damped-oscillator model where one assumes a linear rule of mixture for three quantities: mass, force constant, and mechanical-resistance constant

  6. Resilience Design Patterns - A Structured Approach to Resilience at Extreme Scale (version 1.1)

    Energy Technology Data Exchange (ETDEWEB)

    Hukerikar, Saurabh [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Engelmann, Christian [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-12-01

    Reliability is a serious concern for future extreme-scale high-performance computing (HPC) systems. Projections based on the current generation of HPC systems and technology roadmaps suggest the prevalence of very high fault rates in future systems. The errors resulting from these faults will propagate and generate various kinds of failures, which may result in outcomes ranging from result corruptions to catastrophic application crashes. Therefore the resilience challenge for extreme-scale HPC systems requires management of various hardware and software technologies that are capable of handling a broad set of fault models at accelerated fault rates. Also, due to practical limits on power consumption in HPC systems future systems are likely to embrace innovative architectures, increasing the levels of hardware and software complexities. As a result the techniques that seek to improve resilience must navigate the complex trade-off space between resilience and the overheads to power consumption and performance. While the HPC community has developed various resilience solutions, application-level techniques as well as system-based solutions, the solution space of HPC resilience techniques remains fragmented. There are no formal methods and metrics to investigate and evaluate resilience holistically in HPC systems that consider impact scope, handling coverage, and performance & power efficiency across the system stack. Additionally, few of the current approaches are portable to newer architectures and software environments that will be deployed on future systems. In this document, we develop a structured approach to the management of HPC resilience using the concept of resilience-based design patterns. A design pattern is a general repeatable solution to a commonly occurring problem. We identify the commonly occurring problems and solutions used to deal with faults, errors and failures in HPC systems. Each established solution is described in the form of a pattern that

  7. Adolescent stress and symptoms of anxiety and depression: Resilience explains and differentiates the relationships.

    Science.gov (United States)

    Anyan, Frederick; Hjemdal, Odin

    2016-10-01

    Some adolescents exhibit resilience even in the face of high levels of stress exposure. Despite this relationship, studies that investigate explanations for how resilience interacts with risk to produce particular outcomes and why this is so are lacking. The effect of resilience across the relationship between stress and symptoms of anxiety and stress and symptoms of depression was tested to provide explanations for how resilience interacts with stress and symptoms of anxiety, and depression. In a cross-sectional survey, 533 Ghanaian adolescents aged 13-17 years (M=15.25, SD=1.52), comprising 290 girls and 237 boys completed the Resilience Scale for Adolescents, Adolescent Stress Questionnaire, Spielberger State Anxiety Inventory, and Short Mood Feeling Questionnaire. Mediation and moderation analyses were conducted. The results indicated that resilience partially mediated the relationship between stress, and symptoms of anxiety, and depression. Effects of stress were negatively associated with resilience, and positively associated with symptoms of anxiety and depression. In a differential moderator effect, resilience moderated the relationship between stress and symptoms of depression but not stress and symptoms of anxiety. Although the findings in this study are novel, they do not answer questions about protective mechanisms or processes. Evidence that resilience did not have the same effect across stress, and symptoms of anxiety and depression may support resilience as a dynamic process model. Access to different levels of resilience shows that enhancing resilience while minimizing stress may improve psychiatric health in adolescents' general population. Copyright © 2016 Elsevier B.V. All rights reserved.

  8. Building Inner Resilience

    Science.gov (United States)

    Lantieri, Linda

    2008-01-01

    The capacity to be in control of one's thoughts, emotions, and physiology can form an internal safety net preparing children to face the challenges and opportunities of life. This is the goal of the Inner Resilience Program in the New York City Schools. Teachers in the Inner Resilience Program's intervention are exposed to calming and focusing…

  9. E-modulus evolution and its relation to solids formation of pastes from commercial cements

    International Nuclear Information System (INIS)

    Maia, Lino; Azenha, Miguel; Geiker, Mette; Figueiras, Joaquim

    2012-01-01

    Models for early age E-modulus evolution of cement pastes are available in the literature, but their validation is limited. This paper provides correlated measurements of early age evolution of E-modulus and hydration of pastes from five commercial cements differing in limestone content. A recently developed methodology allowed continuous monitoring of E-modulus from the time of casting. The methodology is a variant of classic resonant frequency methods, which are based on determination of the first resonant frequency of a composite beam containing the material. The hydration kinetics — and thus the rate of formation of solids — was determined using chemical shrinkage measurements. For the cements studied similar relationships between E-modulus and chemical shrinkage were observed for comparable water-to-binder ratio. For commercial cements it is suggested to model the E-modulus evolution based on the amount of binder reacted, instead of the degree of hydration.

  10. Beyond Negative Pain-Related Psychological Factors: Resilience Is Related to Lower Pain Affect in Healthy Adults.

    Science.gov (United States)

    Hemington, Kasey S; Cheng, Joshua C; Bosma, Rachael L; Rogachov, Anton; Kim, Junseok A; Davis, Karen D

    2017-09-01

    Resilience, a characteristic that enhances adaptation in response to stressful events, is a positive psychological factor that can predict and modulate health outcomes. However, resilience is rarely considered in pain research. Conversely, negative psychological factors (eg, anxiety, depression) are known to be related to the affective dimension of pain. It is critical to understand all potential psychological drivers of pain affect, a prominent component of chronic pain. We tested the hypothesis that higher resilience is associated with lower pain affect, above and beyond the predictive value of negative psychological factors. Healthy adults underwent psychophysical testing to acquire ratings of heat pain intensity and unpleasantness and completed the Resilience Scale, the State-Trait Anxiety Inventory (trait form), Beck Depression Inventory, Pain Catastrophizing Scale, and the Pain Vigilance and Attention Questionnaire. Multiple regression modeling (n = 68) showed resilience to be a negatively associated with pain affect (unpleasantness). Furthermore, in individuals with higher anxiety scores, resilience was protective against higher pain affect. This highlights the importance of resilience, a positive psychological factor, in the affective dimension of pain. This study is the first to assess a positive psychological factor and experimental pain affect, and has the potential to improve prediction of and treatment strategies for clinical pain. We report that resilience, a positive psychological factor, interacts with anxiety and is associated with heat pain affect (unpleasantness) in healthy individuals. Resilience may provide predictive value of chronic pain affect and treatment outcomes, and could be a target for behavioral therapy. Copyright © 2017 American Pain Society. Published by Elsevier Inc. All rights reserved.

  11. Estadiamento e grau de resiliência do sobrevivente ao câncer de mama Staging and resilience degree in breast cancer survivors

    Directory of Open Access Journals (Sweden)

    Niviane Genz

    2016-10-01

    Full Text Available Objetivo: Investigar o grau de resiliência e de estadiamento frente aos fatores sociodemográficos dos sobreviventes ao câncer de mama em acompanhamento em um serviço de oncologia. Métodos: Estudo quantitativo, amostra de 112 sobreviventes ao câncer de mama. Foram selecionadas variáveis sociodemográficas, estadiamento clínico, tempo de sobrevida e escala de resiliência. Análise no epi-info 6.04 e teste exato de fischer. Aprovação do Comitê de Ética da Faculdade de Enfermagem da UFPel  nº 31/2009. Resultados: média de idade de 46,2 anos, 60,71% estadiamento II, 81,25% eram brancas, 40,18% com escolaridade entre 5-8 anos, 52,68% casados, 73,32% viveu em zona urbana, 41,96% apresentou alta resiliência e 48,21% mantinha-se em acompanhamento entre 1-3 anos. Conclusão: O estadiamento não está associado ao grau de resiliência, mas sim à idade e tempo de sobrevida confirmando os achados em outros estudos.

  12. Resilience in patients with psychotic disorder.

    Science.gov (United States)

    Bozikas, V; Parlapani, E

    2016-01-01

    The recovery movement differentiated clinical, which is related to disorder's symptoms, from personal recovery, which is outlined by a subjectively defined wellness state, characterised by hope and self-management. Schizophrenia research has long focused on risk factors and symptoms. The recovery movement triggered a focus shift from psychopathology towards better adjustment and growth despite living with schizophrenia. The recovery movement flourished parallel with positive psychology, the scientific study of ordinary human strengths and virtues investigating human motives and potentials. Understanding of human strengths could contribute to prevention or lessening of psychiatric disorders' devastating consequences, since optimism, sense of personal control and many other positive processes promote psychological health. Lately, the concepts of positive psychology have been implemented in schizophrenia research. Positive self-appraisals moderated suicidal ideation, even when patients experienced high levels of hopelessness.1 Additionally, among other factors, better self-images, internal locus of control (i.e. the perception that events in one's life relate to one's actions) and emphasis on personal efforts predicted a more favourable outcome in functioning of unmedicated patients.2 The concept of "resilience" is closely related to positive psychology. The American Psychological Association defines resilience as ''the process of adapting well in the face of adversity, trauma, threats or significant sources of stress''. The concept of resilience includes rebound from adversity.3 Determinants of resilience include biological, psychological, social and cultural factors that interact in a complex manner. The major manifestations of personal resilience are social competence, problem solving, autonomy and sense of purpose.5 Personality strengths that relate to resilience include high self-esteem, extroversion and optimism. Internal assets and personal competencies

  13. The Holistic Integrity Test (HIT - quantified resilience analysis

    Directory of Open Access Journals (Sweden)

    Dobson Mike

    2016-01-01

    Full Text Available The Holistic Integrity Test (HIT - Quantified Resilience Analysis. Rising sea levels and wider climate change mean we face an increasing risk from flooding and other natural hazards. Tough economic times make it difficult to economically justify or afford the desired level of engineered risk reduction. Add to this significant uncertainty from a range of future predictions, constantly updated with new science. We therefore need to understand not just how to reduce the risk, but what could happen should above design standard events occur. In flood terms this includes not only the direct impacts (damage and loss of life, but the wider cascade impacts to infrastructure systems and the longer term impacts on the economy and society. However, understanding the “what if” is only the first part of the equation; a range of improvement measures to mitigate such effects need to be identified and implemented. These measures should consider reducing the risk, lessening the consequences, aiding the response, and speeding up the recovery. However, they need to be objectively assessed through quantitative analysis, which underpins them technically and economically. Without such analysis, it cannot be predicted how measures will perform if the extreme events occur. It is also vital to consider all possible hazards as measures for one hazard may hinder the response to another. The Holistic Integrity Test (HIT, uses quantitative system analysis and “HITs” the site, its infrastructure, contained dangers and wider regional system to determine how it copes with a range of severe shock events, Before, During and After the event, whilst also accounting for uncertainty (as illustrated in figure 1. First explained at the TINCE 2014 Nuclear Conference in Paris, it was explained in terms of a Nuclear Facility needing to analyse the site in response to post Fukushima needs; the hit is however universally applicable. The HIT has three key risk reduction goals: The

  14. Emotional Intelligence and resilience in mental health professionals caring for patients with serious mental illness.

    Science.gov (United States)

    Frajo-Apor, Beatrice; Pardeller, Silvia; Kemmler, Georg; Hofer, Alex

    2016-09-01

    Emotional Intelligence (EI) and resilience may be considered as prerequisites for mental health professionals caring for patients with serious mental illness (SMI), since they are often exposed to severe emotional stress during daily work. Accordingly, this cross-sectional study assessed both EI and resilience and their interrelationship in 61 individuals belonging to an assertive outreach team for patients suffering from SMI compared 61 control subjects without healthcare-related working conditions. EI was assessed by means of the German version of the Mayer-Salovey-Caruso-Emotional-Intelligence Test (MSCEIT), resilience was assessed using the German version of the Resilience Scale. Both groups showed an average level of EI in all categories of the MSCEIT and indicated high levels of resilience. They did not differ significantly from each other, neither in terms of EI nor resilience. Correlation analysis revealed a positive association between EI and resilience, albeit small in magnitude. Our results suggest that mental health professionals are not more resilient and therefore not more 'protected' from stressors than the general population. Though this finding warrants cautious interpretation, the positive correlation between EI and resilience suggests that EI may be a potential target for education and training in order to strengthen resilience even in healthy individuals and vice versa.

  15. A comparison of elastic-plastic and variable modulus-cracking constitutive models for prestressed concrete reactor vessels

    International Nuclear Information System (INIS)

    Anderson, C.A.; Smith, P.D.

    1979-01-01

    Numerical prediction of the behavior of prestressed concrete reactor vessels (PCRVs) under static, dynamic and long term loadings is complicated by the currently ill-defined behavior of concrete under stress and the three-dimensional nature of PCRVs. Which constitutive model most closely approximates the behavior of concrete in PCRVs under load has not yet been decided. Many equations for accurately modeling the three-dimensional behavior of PCRVs tax the capability of a most up-to-date computing system. The main purpose of this paper is to compare the characteristics of two constitutive models which have been proposed for concrete, variable modulus cracking model and elastic-plastic model. Moreover, the behavior of typical concrete structures was compared, the materials of which obey these constitutive laws. The response to internal pressure of PCRV structure, the constitutive models for concrete, the test problems using a thick-walled concrete ring and a rectangular concrete plate, and the analysis of an axisymmetric concrete pressure vessel PV-26 using the variable modulus cracking model of the ADINA code are explained. The variable modulus cracking model can predict the behavior of reinforced concrete structures well into the range of nonlinear behavior. (Kako, I.)

  16. Performance of asphaltic concrete incorporating styrene butadiene rubber subjected to varying aging condition

    Science.gov (United States)

    Salah, Faisal Mohammed; Jaya, Ramadhansyah Putra; Mohamed, Azman; Hassan, Norhidayah Abdul; Rosni, Nurul Najihah Mad; Mohamed, Abdullahi Ali; Agussabti

    2017-12-01

    The influence of styrene butadiene rubber (SBR) on asphaltic concrete properties at different aging conditions was presented in this study. These aging conditions were named as un-aged, short-term, and long-term aging. The conventional asphalt binder of penetration grade 60/70 was used in this work. Four different levels of SBR addition were employed (i.e., 0 %, 1 %, 3 %, and 5 % by binder weight). Asphalt concrete mixes were prepared at selected optimum asphalt content (5 %). The performance was evaluated based on Marshall Stability, resilient modulus, and dynamic creep tests. Results indicated the improving stability and permanent deformation characteristics that the mixes modified with SBR polymer have under aging conditions. The result also showed that the stability, resilient modulus, and dynamic creep tests have the highest rates compared to the short-term aging and un-aged samples. Thus, the use of 5 % SBR can produce more durable asphalt concrete mixtures with better serviceability.

  17. Deformation Behavior of Recycled Concrete Aggregate during Cyclic and Dynamic Loading Laboratory Tests

    Directory of Open Access Journals (Sweden)

    Wojciech Sas

    2016-09-01

    Full Text Available Recycled concrete aggregate (RCA is a relatively new construction material, whose applications can replace natural aggregates. To do so, extensive studies on its mechanical behavior and deformation characteristics are still necessary. RCA is currently used as a subbase material in the construction of roads, which are subject to high settlements due to traffic loading. The deformation characteristics of RCA must, therefore, be established to find the possible fatigue and damage behavior for this new material. In this article, a series of triaxial cyclic loading and resonant column tests is used to characterize fatigue in RCA as a function of applied deviator stress after long-term cyclic loading. A description of the shakedown phenomenon occurring in the RCA and calculations of its resilient modulus (Mr as a function of fatigue are also presented. Test result analysis with the stress-life method on the Wohler S-N diagram shows the RCA behavior in accordance with the Basquin law.

  18. [The resilience and health status of primary caregivers of schizophrenia patients].

    Science.gov (United States)

    Fan, Ya-Chi; Chen, Mei-Bih; Lin, Kuan-Chia; Bai, Ya-Mei; Wei, Shiow-Jing

    2014-12-01

    Resilience has been shown to have a positive effect on health status. However, little research has been conducted on the impact of resilience on the health of primary caregivers of schizophrenia patients. This study investigated the correlations between resilience and the health status of caregivers of schizophrenia patients. A cross-sectional, descriptive research design was used. Data collection was conducted using a set of questionnaires that included a demographic datasheet, the SOC-13 (Sense of Coherence), the DASS-21 (Depression Anxiety Stress Scales), and the SF-36 (short form). Seventy caregivers of schizophrenia patients were enrolled as participants at the psychiatric inpatient department of a medical center. SPSS 17.0 and SAS.9.2 statistical software packages were used to conduct descriptive analysis, the Sobel test, and Tobit model analysis. (1) The mean QOL (quality of life) scale score was 67.46 (SD = 17.74). Nearly one-fifth (18.6%) of caregivers were classified in the low to high depression range; 17.1% were classified in the low to high anxiety level; and 10% were classified in low to high stress level. (2) Duration of the caring period correlated negatively with caregiver QOL; having a concomitant disease significantly impacted QOL and resilience; and number of patient hospitalization days correlated negatively with level of caregiver anxiety. (3) The numbers of incidents of patient violence and patient suicide attempts correlated negatively with caregiver resilience and QOL. (4) Resilience was a mediator between care-giver demographic data and QOL. (5) Caregiver resilience was a predictor of QOL, depression, anxiety, and stress. The findings of the present study increase our understanding of the impact of resilience on the health status of caregivers of schizophrenia patients. The authors hope these finding may be referenced in the development of resilience-based nursing caring models in the future.

  19. Assessment of longitudinal modulus of elasticity in structural elements of Pinus Caribaea timber beams

    Directory of Open Access Journals (Sweden)

    André Luis Christoforo

    2012-05-01

    Full Text Available The current standard NBR 7190/1997 (Project of Timber Structures makes no reference to tests for determining the stiffness and strength in parts of structural lumber; restricting the analysis to bodies-of-tests with small dimensions and without defects. This paper presents an alternative method to determine the longitudinal modulus of elasticity in timber beams, based on the Finite Element Method, as well as the Inverse Analysis Method with an optimization technique. Results show that the methodology proposed by the Brazilian standard can also be applied to pieces of structural dimensions.

  20. The impact of resilience and subsequent stressful life events on MDD and GAD.

    Science.gov (United States)

    Sheerin, Christina M; Lind, Mackenzie J; Brown, Emily A; Gardner, Charles O; Kendler, Kenneth S; Amstadter, Ananda B

    2018-02-01

    There remains a dearth of research examining the "buffering" effect of resilience, wherein resilience at one point in time would be expected to protect an individual against development of psychopathology following future adverse life events. Using longitudinal data from an epidemiological twin sample (N = 7463), this study tested whether resilience would act as a buffer for stressful life events (SLEs) against risk for major depressive disorder (MDD) and generalized anxiety disorder (GAD). Resilience, demographics, and psychopathology were measured at Time 1 and recent SLEs and current MDD and GAD were measured at Time 2. Final models, controlling for demographic covariates and Time 1 diagnosis, examined the impact of Time 1 resilience, recent SLEs, their interaction, and a three-way interaction adding sex on MDD and GAD. The pattern of findings was the same for MDD and GAD, wherein main effects and two-way interactions of resilience and SLEs were significant, such that greater resilience was protective even in the context of high numbers of past-year SLEs. The three-way interaction was not significant, suggesting that the relationship between SLEs and resilience on psychopathology was the same for both men and women. Findings support the conceptualization of resilience as a buffer against the impact of future life stressors on common internalizing psychopathology. Longitudinal designs and trajectory-based studies that include recurring measures of SLEs could inform conceptualizations of resilience in the context of ongoing adversity and aid in developing interventions aimed at fostering healthy adaptation in the face of stressors. © 2017 Wiley Periodicals, Inc.

  1. Nano-fillers to tune Young’s modulus of silicone matrix

    International Nuclear Information System (INIS)

    Xia Lijin; Xu Zhonghua; Sun Leming; Caveney, Patrick M.; Zhang Mingjun

    2013-01-01

    In this study, we investigated nanoparticles, nanofibers, and nanoclays for their filler effects on tuning the Young’s modulus of silicone matrix, a material with broad in vivo applications. Nano-fillers with different shapes, sizes, and surface properties were added into silicone matrix, and then their filler effects were evaluated through experimental studies. It was found that spherical nanoparticles could clearly improve Young’s modulus of the silicone matrix, while nanoclays and carbon nanofibers had limited effects. Smaller spherical nanoparticles were better in performance compared to larger nanoparticles. In addition, enhanced distribution of the nanoparticles in the matrix has been observed to improve the filler effect. In order to minimize toxicity of the nanoparticles for in vivo applications, spherical nanoparticles coated with amine, acid, or hydroxide groups were also investigated, but they were found only to diminish the filler effect of nanoparticles. This study demonstrated that spherical nanoparticles could serve as fillers to tune Young’s modulus of silicone matrix for potential applications in medicine.

  2. A Regev-Type Fully Homomorphic Encryption Scheme Using Modulus Switching

    Science.gov (United States)

    Chen, Zhigang; Wang, Jian; Song, Xinxia

    2014-01-01

    A critical challenge in a fully homomorphic encryption (FHE) scheme is to manage noise. Modulus switching technique is currently the most efficient noise management technique. When using the modulus switching technique to design and implement a FHE scheme, how to choose concrete parameters is an important step, but to our best knowledge, this step has drawn very little attention to the existing FHE researches in the literature. The contributions of this paper are twofold. On one hand, we propose a function of the lower bound of dimension value in the switching techniques depending on the LWE specific security levels. On the other hand, as a case study, we modify the Brakerski FHE scheme (in Crypto 2012) by using the modulus switching technique. We recommend concrete parameter values of our proposed scheme and provide security analysis. Our result shows that the modified FHE scheme is more efficient than the original Brakerski scheme in the same security level. PMID:25093212

  3. The Australian Natural Disaster Resilience Index

    Science.gov (United States)

    Thoms, Martin

    2016-04-01

    The Australian Natural Disaster Resilience Index Martin Thoms, Melissa Parsons, Phil Morley Bushfire and Natural Hazards Cooperative Research Centre, Geography and Planning, University of New England, Armidale NSW 2351, Australia. Natural hazard management policy directions in Australia - and indeed internationally - are increasingly being aligned to ideas of resilience. Resilience to natural hazards is the ability of individuals and communities to cope with disturbance and adversity and to maintain adaptive behaviour. Operationalizing the measurement and assessment of disaster resilience is often undertaken using a composite index, but this exercise is yet to be undertaken in Australia. The Australian Natural Disaster Resilience Index is a top-down, national scale assessment of the resilience of communities to natural hazards. Resilience is assessed based on two sets of capacities: coping and adaptive capacities. Coping capacity relates to the factors influencing the ability of a community to prepare for, absorb and recover from a natural hazard event. Adaptive capacity relates to the arrangements and processes that enable adjustment through learning, adaptation and transformation. Indicators are derived under themes of social character, economic capital, infrastructure and planning, emergency services, community capital, information and engagement and governance/leadership/policy, using existing data sets (e.g. census data) or evaluation of policy and procedure (e.g. disaster management planning). A composite index of disaster resilience is then computed for each spatial division, giving national scale coverage. The results of the Australian Natural Disaster Resilience Index will be reported in a State of Disaster Resilience report, due in 2018. The index is co-designed with emergency service agencies, and will support policy development, planning, community engagement and emergency management.

  4. A simple model for calculating the bulk modulus of the mixed ionic ...

    Indian Academy of Sciences (India)

    thermophysical properties, viz., bulk modulus, molecular force constant, reststrahlen fre- quency and Debye temperature using the three-body potential model. The calculated bulk modulus, from the TBPM model, for the pure end members (NH4Cl and NH4Br) are in agreement with the experimental values, as shown in ...

  5. [Perspectives on resilience : trait or aptitude ?

    Science.gov (United States)

    Rolin, H; Fossion, P; Kotsou, I; Leys, C

    2018-01-01

    In this paper, we discuss various issues related to the concept of resilience, which is conventionally defined as a dynamic process allowing for a positive adaptation in a context of significant adversity. First, we try to draw the reader's attention to the importance of the concept of resilience in terms of public health. Second, we address the difficulty of measuring resilience in a relevant and operational manner. Third, we then address the question of whether resilience can be conceived only in the context of a confrontation with trauma, or whether its application can be relevant to the everyday nontraumatic adversity. In this regard, we introduce and define another coping strategy which is the Sense of Coherence (SOC). Fourth, we discuss the nature of resilience, that is to say, whether it should be considered as a personality trait or as an aptitude. We try to show that this problem arises from the difficulty to specify the emotional processes involved in resilience. Finally, we propose future research perspectives that should allow us to better understand the concept of resilience.

  6. Resilience in women with autoimmune rheumatic diseases.

    Science.gov (United States)

    Rojas, Manuel; Rodriguez, Yhojan; Pacheco, Yovana; Zapata, Elizabeth; Monsalve, Diana M; Mantilla, Rubén D; Rodríguez-Jimenez, Monica; Ramírez-Santana, Carolina; Molano-González, Nicolás; Anaya, Juan-Manuel

    2017-12-28

    To evaluate the relationship between resilience and clinical outcomes in patients with autoimmune rheumatic diseases. Focus groups, individual interviews, and chart reviews were done to collect data on 188 women with autoimmune rheumatic diseases, namely rheumatoid arthritis (n=51), systemic lupus erythematosus (n=70), systemic sclerosis (n=35), and Sjögren's syndrome (n=32). Demographic, clinical, and laboratory variables were assessed including disease activity by patient reported outcomes. Resilience was evaluated by using the Brief Resilience Scale. Bivariate, multiple linear regression, and classification and regression trees were used to analyse data. Resilience was influenced by age, duration of disease, and socioeconomic status. Lower resilience scores were observed in younger patients (50years) had higher resilience scores regardless of socioeconomic status. There was no influence of disease activity on resilience. A particular behaviour was observed in systemic sclerosis in which patients with high socioeconomic status and regular physical activity had higher resilience scores. Resilience in patients with autoimmune rheumatic diseases is a continuum process influenced by age and socioeconomic status. The ways in which these variables along with exercise influence resilience deserve further investigation. Copyright © 2017 Société française de rhumatologie. Published by Elsevier SAS. All rights reserved.

  7. Resilience in Utility Technologies

    Science.gov (United States)

    Seaton, Roger

    The following sections are included: * Scope of paper * Preamble * Background to the case-study projects * Source projects * Resilience * Case study 1: Electricity generation * Context * Model * Case study 2: Water recycling * Context * Model * Case study 3: Ecotechnology and water treatment * Context * The problem of classification: Finding a classificatory solution * Application of the new taxonomy to water treatment * Concluding comments and questions * Conclusions * Questions and issues * Purposive or Purposeful? * Resilience: Flexibility and adaptivity? * Resilience: With respect of what? * Risk, uncertainty, surprise, emergence - What sort of shock, and who says so? * Co-evolutionary friction * References

  8. Effect Assessment the Impact of Filler Types on the Input Design Parameter of Flexible Pavements

    Directory of Open Access Journals (Sweden)

    Sahar S. Neham

    2017-08-01

    Full Text Available To meet the requirements of flexible pavements (safety, economy, limited the stresses on the natural subgrade and a smooth ride, good quality material of surface course must be used so to prevent pavement distresses caused by the different types of loadings (structural and environmental loadings, while the resilient modulus is important input data when flexible pavement was designed, it is selected to show its effect by different types of mineral filler as a partial replacement. In this paving mix, to improve the quality of the mix material and to represent the effect of these replacements materials on the elastic characterization by measuring the resilient modulus of hot mix asphalt (HMA: Fly Ash (FA, Ordinary Portland Cement (OPC, Hydrated Lime (HL and Silica Fume (SF are used as a partial percent of filler (Limestone Dust (LSD replacement, where these materials are locally available including (40-50 penetration grade asphalt binder. To achieve the goal of study; asphalt concrete mixes are prepared at their optimum asphalt content using Marshall Method of mix design. Four replacement percent’s were used; 0, 1.5, 3.0 and 4.5 percent by total weight of aggregate for each filler types. According to ASTM D4123 criteria (Resilient Modulus was tested by UTM¬25. Mixes modified with (FA, (OPC, (HL and (SF were found to have average improvement in the value of Resilient Modulus by (13.37, 9.63, 11.14, 24.00 % at 1.5 percent of filler replacement and by (24.54, 16.63, 18.73, 38.31 % at 3.0 percent of filler replacement also the percent of improvement is: (39.55, 26.36, 29.82, 58.30 at 4.5percent of filler replacement sequentially.

  9. Intervention studies to foster resilience - A systematic review and proposal for a resilience framework in future intervention studies.

    Science.gov (United States)

    Chmitorz, A; Kunzler, A; Helmreich, I; Tüscher, O; Kalisch, R; Kubiak, T; Wessa, M; Lieb, K

    2018-02-01

    Psychological resilience refers to the phenomenon that many people are able to adapt to the challenges of life and maintain mental health despite exposure to adversity. This has stimulated research on training programs to foster psychological resilience. We evaluated concepts, methods and designs of 43 randomized controlled trials published between 1979 and 2014 which assessed the efficacy of such training programs and propose standards for future intervention research based on recent developments in the field. We found that concepts, methods and designs in current resilience intervention studies are of limited use to properly assess efficacy of interventions to foster resilience. Major problems are the use of definitions of resilience as trait or a composite of resilience factors, the use of unsuited assessment instruments, and inappropriate study designs. To overcome these challenges, we propose 1) an outcome-oriented definition of resilience, 2) an outcome-oriented assessment of resilience as change in mental health in relation to stressor load, and 3) methodological standards for suitable study designs of future intervention studies. Our proposals may contribute to an improved quality of resilience intervention studies and may stimulate further progress in this growing research field. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  10. Resilience definitions, theory, and challenges: interdisciplinary perspectives.

    Science.gov (United States)

    Southwick, Steven M; Bonanno, George A; Masten, Ann S; Panter-Brick, Catherine; Yehuda, Rachel

    2014-01-01

    In this paper, inspired by the plenary panel at the 2013 meeting of the International Society for Traumatic Stress Studies, Dr. Steven Southwick (chair) and multidisciplinary panelists Drs. George Bonanno, Ann Masten, Catherine Panter-Brick, and Rachel Yehuda tackle some of the most pressing current questions in the field of resilience research including: (1) how do we define resilience, (2) what are the most important determinants of resilience, (3) how are new technologies informing the science of resilience, and (4) what are the most effective ways to enhance resilience? These multidisciplinary experts provide insight into these difficult questions, and although each of the panelists had a slightly different definition of resilience, most of the proposed definitions included a concept of healthy, adaptive, or integrated positive functioning over the passage of time in the aftermath of adversity. The panelists agreed that resilience is a complex construct and it may be defined differently in the context of individuals, families, organizations, societies, and cultures. With regard to the determinants of resilience, there was a consensus that the empirical study of this construct needs to be approached from a multiple level of analysis perspective that includes genetic, epigenetic, developmental, demographic, cultural, economic, and social variables. The empirical study of determinates of resilience will inform efforts made at fostering resilience, with the recognition that resilience may be enhanced on numerous levels (e.g., individual, family, community, culture).

  11. Resilience definitions, theory, and challenges: interdisciplinary perspectives

    Science.gov (United States)

    Southwick, Steven M.; Bonanno, George A.; Masten, Ann S.; Panter-Brick, Catherine; Yehuda, Rachel

    2014-01-01

    In this paper, inspired by the plenary panel at the 2013 meeting of the International Society for Traumatic Stress Studies, Dr. Steven Southwick (chair) and multidisciplinary panelists Drs. George Bonanno, Ann Masten, Catherine Panter-Brick, and Rachel Yehuda tackle some of the most pressing current questions in the field of resilience research including: (1) how do we define resilience, (2) what are the most important determinants of resilience, (3) how are new technologies informing the science of resilience, and (4) what are the most effective ways to enhance resilience? These multidisciplinary experts provide insight into these difficult questions, and although each of the panelists had a slightly different definition of resilience, most of the proposed definitions included a concept of healthy, adaptive, or integrated positive functioning over the passage of time in the aftermath of adversity. The panelists agreed that resilience is a complex construct and it may be defined differently in the context of individuals, families, organizations, societies, and cultures. With regard to the determinants of resilience, there was a consensus that the empirical study of this construct needs to be approached from a multiple level of analysis perspective that includes genetic, epigenetic, developmental, demographic, cultural, economic, and social variables. The empirical study of determinates of resilience will inform efforts made at fostering resilience, with the recognition that resilience may be enhanced on numerous levels (e.g., individual, family, community, culture). PMID:25317257

  12. Transdisciplinary application of the cross-scale resilience model

    Science.gov (United States)

    Sundstrom, Shana M.; Angeler, David G.; Garmestani, Ahjond S.; Garcia, Jorge H.; Allen, Craig R.

    2014-01-01

    The cross-scale resilience model was developed in ecology to explain the emergence of resilience from the distribution of ecological functions within and across scales, and as a tool to assess resilience. We propose that the model and the underlying discontinuity hypothesis are relevant to other complex adaptive systems, and can be used to identify and track changes in system parameters related to resilience. We explain the theory behind the cross-scale resilience model, review the cases where it has been applied to non-ecological systems, and discuss some examples of social-ecological, archaeological/ anthropological, and economic systems where a cross-scale resilience analysis could add a quantitative dimension to our current understanding of system dynamics and resilience. We argue that the scaling and diversity parameters suitable for a resilience analysis of ecological systems are appropriate for a broad suite of systems where non-normative quantitative assessments of resilience are desired. Our planet is currently characterized by fast environmental and social change, and the cross-scale resilience model has the potential to quantify resilience across many types of complex adaptive systems.

  13. The Measurement and Role of Ecological Resilience Systems Theory Across Domain-Specific Outcomes: The Domain-Specific Resilient Systems Scales.

    Science.gov (United States)

    Maltby, John; Day, Liz; Hall, Sophie S; Chivers, Sally

    2017-10-01

    Research suggests that trait resilience may be best understood within an ecological resilient systems theory, comprising engineering, ecological, and adaptive capacity resilience. However, there is no evidence as to how this theory translates to specific life domains. Data from two samples (the United States, n = 1,278; the United Kingdom, n = 211) facilitated five studies that introduce the Domain-Specific Resilient Systems Scales for assessing ecological resilient systems theory within work, health, marriage, friendships, and education. The Domain-Specific Resilient Systems Scales are found to predict unique variance in job satisfaction, lower job burnout, quality-of-life following illness, marriage commitment, and educational engagement, while controlling for factors including sex, age, personality, cognitive ability, and trait resilience. The findings also suggest a distinction between the three resilience dimensions in terms of the types of systems to which they contribute. Engineering resilience may contribute most to life domains where an established system needs to be maintained, for example, one's health. Ecological resilience may contribute most to life domains where the system needs sustainability in terms of present and future goal orientation, for example, one's work. Adaptive Capacity may contribute most to life domains where the system needs to be retained, preventing it from reaching a crisis state, for example, work burnout.

  14. Maximisation of the ratio of microhardness to the Young's modulus of Ti-12Mo-13Nb alloy through microstructure changes.

    Science.gov (United States)

    Gabriel, Sinara B; de Almeida, Luiz H; Nunes, Carlos A; Dille, Jean; Soares, Glória A

    2013-08-01

    Alloys for orthopaedic and dentistry applications require high mechanical strength and a low Young's modulus to avoid stress shielding. Metastable β titanium alloys appear to fulfil these requirements. This study investigated the correlation of phases precipitated in a Ti-12Mo-13Nb alloy with changes in hardness and the Young's modulus. The alloy was produced by arc melting under an argon atmosphere, after which, it was heat treated and cold forged. Two different routes of heat treatment were employed. Phase transformations were studied by employing X-ray diffraction and transmission electron microscopy. Property characterisation was based on Vickers microhardness tests and Young's modulus measurements. The highest ratio of microhardness to the Young's modulus was obtained using thermomechanical treatment, which consists of heating at 1000°C for 24h, water quenching, cold forging to reduce 80% of the area, and ageing at 500°C for 24h, where the final microstructure consisted of an α phase dispersed in a β matrix. The α phase appeared in two different forms: as fine lamellas (with 240±100 nm length) and massive particles of 200-500 nm size. Copyright © 2013 Elsevier B.V. All rights reserved.

  15. Influence of wood moisture content on the modulus of elasticity in compression parallel to the grain

    Directory of Open Access Journals (Sweden)

    Diogo Aparecido Lopes Silva

    2012-04-01

    Full Text Available Brazilian Standard ABNT NBR7190:1997 for timber structures design, adopts a first degree equation to describe the influence of wood moisture content. Periodically, when necessary, the referred standard is revised in order to analyze inconsistencies and to adopt considerations according new realities verified. So, the present paper aims to examine the adequacy of its equation which corrects to 12% of moisture the values of rigidity properties obtained on experimental tests. To quantify the moisture influence on modulus of elasticity, it was applied tests of compression parallel to the grain for six specimens of different strength classes, considering nominal moisture of 12; 20; 25; 30%. As results, modulus of elasticity in the moisture range 25-30% showed statistically equivalents, and was obtained a first degree equation to correlate the studied variables which leads to statically equivalent estimations when compared with results by ABNT NBR7190:1997 equation. However, it was indicated to maintain the current expression for the next text of the referred document review, without prejudice to statistical significance of the estimates.

  16. Efficacy of a self-help manual in increasing resilience in carers of adults with depression in Thailand.

    Science.gov (United States)

    McCann, Terence V; Songprakun, Wallapa; Stephenson, John

    2016-02-01

    Caring for a person with a mental illness can have adverse effects on caregivers; however, little is known about how best to help such caregivers. The aim of the present study was to examine the efficacy of a cognitive behaviour therapy-guided self-help manual in increasing resilience in caregivers of individuals with depression, in comparison to caregivers who receive routine support only. A randomized, controlled trial was conducted, following CONSORT guidelines, with 54 caregivers allocated to parallel intervention (self-help manual) (n = 27) or control (standard support) (n = 27) groups. Resilience was assessed at baseline, post-test (week 8), and follow up (week 12). Intention-to-treat analyses were undertaken. Repeated-measures ANOVA indicated a significant difference in resilience scores between the three time points, showing a large effect. Pairwise comparisons between intervention and control groups indicated resilience to be significantly different between baseline and post-test, and between baseline and follow up, but not between post-test and follow up. Overall, the intervention group showed a slightly greater increase in resilience over time than the control group; however, the time-group interaction was not significant. Guided self-help is helpful in improving caregivers' resilience and could be used as an adjunct to the limited support provided to carers by mental health nurses and other clinicians. © 2016 Australian College of Mental Health Nurses Inc.

  17. Network Skewness Measures Resilience in Lake Ecosystems

    Science.gov (United States)

    Langdon, P. G.; Wang, R.; Dearing, J.; Zhang, E.; Doncaster, P.; Yang, X.; Yang, H.; Dong, X.; Hu, Z.; Xu, M.; Yanjie, Z.; Shen, J.

    2017-12-01

    Changes in ecosystem resilience defy straightforward quantification from biodiversity metrics, which ignore influences of community structure. Naturally self-organized network structures show positive skewness in the distribution of node connections. Here we test for skewness reduction in lake diatom communities facing anthropogenic stressors, across a network of 273 lakes in China containing 452 diatom species. Species connections show positively skewed distributions in little-impacted lakes, switching to negative skewness in lakes associated with human settlement, surrounding land-use change, and higher phosphorus concentration. Dated sediment cores reveal a down-shifting of network skewness as human impacts intensify, and reversal with recovery from disturbance. The appearance and degree of negative skew presents a new diagnostic for quantifying system resilience and impacts from exogenous forcing on ecosystem communities.

  18. The Resiliency Scale for Young Adults

    Science.gov (United States)

    Prince-Embury, Sandra; Saklofske, Donald H.; Nordstokke, David W.

    2017-01-01

    The Resiliency Scale for Young Adults (RSYA) is presented as an upward extension of the Resiliency Scales for Children and Adolescents (RSCA). The RSYA is based on the "three-factor model of personal resiliency" including "mastery," "relatedness," and "emotional reactivity." Several stages of scale…

  19. Metrics for energy resilience

    International Nuclear Information System (INIS)

    Roege, Paul E.; Collier, Zachary A.; Mancillas, James; McDonagh, John A.; Linkov, Igor

    2014-01-01

    Energy lies at the backbone of any advanced society and constitutes an essential prerequisite for economic growth, social order and national defense. However there is an Achilles heel to today's energy and technology relationship; namely a precarious intimacy between energy and the fiscal, social, and technical systems it supports. Recently, widespread and persistent disruptions in energy systems have highlighted the extent of this dependence and the vulnerability of increasingly optimized systems to changing conditions. Resilience is an emerging concept that offers to reconcile considerations of performance under dynamic environments and across multiple time frames by supplementing traditionally static system performance measures to consider behaviors under changing conditions and complex interactions among physical, information and human domains. This paper identifies metrics useful to implement guidance for energy-related planning, design, investment, and operation. Recommendations are presented using a matrix format to provide a structured and comprehensive framework of metrics relevant to a system's energy resilience. The study synthesizes previously proposed metrics and emergent resilience literature to provide a multi-dimensional model intended for use by leaders and practitioners as they transform our energy posture from one of stasis and reaction to one that is proactive and which fosters sustainable growth. - Highlights: • Resilience is the ability of a system to recover from adversity. • There is a need for methods to quantify and measure system resilience. • We developed a matrix-based approach to generate energy resilience metrics. • These metrics can be used in energy planning, system design, and operations

  20. Memory Resilience to Alzheimer's Genetic Risk: Sex Effects in Predictor Profiles.

    Science.gov (United States)

    McDermott, Kirstie L; McFall, G Peggy; Andrews, Shea J; Anstey, Kaarin J; Dixon, Roger A

    2017-10-01

    Apolipoprotein E (APOE) ɛ4 and Clusterin (CLU) C alleles are risk factors for Alzheimer's disease (AD) and episodic memory (EM) decline. Memory resilience occurs when genetically at-risk adults perform at high and sustained levels. We investigated whether (a) memory resilience to AD genetic risk is predicted by biological and other risk markers and (b) the prediction profiles vary by sex and AD risk variant. Using a longitudinal sample of nondemented adults (n = 642, aged 53-95) we focused on memory resilience (over 9 years) to 2 AD risk variants (APOE, CLU). Growth mixture models classified resilience. Random forest analysis, stratified by sex, tested the predictive importance of 22 nongenetic risk factors from 5 domains (n = 24-112). For both sexes, younger age, higher education, stronger grip, and everyday novel cognitive activity predicted memory resilience. For women, 9 factors from functional, health, mobility, and lifestyle domains were also predictive. For men, only fewer depressive symptoms was an additional important predictor. The prediction profiles were similar for APOE and CLU. Although several factors predicted resilience in both sexes, a greater number applied only to women. Sex-specific mechanisms and intervention targets are implied. © The Author 2016. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  1. Simultaneous estimation of Poisson's ratio and Young's modulus using a single indentation: a finite element study

    International Nuclear Information System (INIS)

    Zheng, Y P; Choi, A P C; Ling, H Y; Huang, Y P

    2009-01-01

    Indentation is commonly used to determine the mechanical properties of different kinds of biological tissues and engineering materials. With the force–deformation data obtained from an indentation test, Young's modulus of the tissue can be calculated using a linear elastic indentation model with a known Poisson's ratio. A novel method for simultaneous estimation of Young's modulus and Poisson's ratio of the tissue using a single indentation was proposed in this study. Finite element (FE) analysis using 3D models was first used to establish the relationship between Poisson's ratio and the deformation-dependent indentation stiffness for different aspect ratios (indentor radius/tissue original thickness) in the indentation test. From the FE results, it was found that the deformation-dependent indentation stiffness linearly increased with the deformation. Poisson's ratio could be extracted based on the deformation-dependent indentation stiffness obtained from the force–deformation data. Young's modulus was then further calculated with the estimated Poisson's ratio. The feasibility of this method was demonstrated in virtue of using the indentation models with different material properties in the FE analysis. The numerical results showed that the percentage errors of the estimated Poisson's ratios and the corresponding Young's moduli ranged from −1.7% to −3.2% and 3.0% to 7.2%, respectively, with the aspect ratio (indentor radius/tissue thickness) larger than 1. It is expected that this novel method can be potentially used for quantitative assessment of various kinds of engineering materials and biological tissues, such as articular cartilage

  2. A global analysis approach for investigating structural resilience in urban drainage systems.

    Science.gov (United States)

    Mugume, Seith N; Gomez, Diego E; Fu, Guangtao; Farmani, Raziyeh; Butler, David

    2015-09-15

    Building resilience in urban drainage systems requires consideration of a wide range of threats that contribute to urban flooding. Existing hydraulic reliability based approaches have focused on quantifying functional failure caused by extreme rainfall or increase in dry weather flows that lead to hydraulic overloading of the system. Such approaches however, do not fully explore the full system failure scenario space due to exclusion of crucial threats such as equipment malfunction, pipe collapse and blockage that can also lead to urban flooding. In this research, a new analytical approach based on global resilience analysis is investigated and applied to systematically evaluate the performance of an urban drainage system when subjected to a wide range of structural failure scenarios resulting from random cumulative link failure. Link failure envelopes, which represent the resulting loss of system functionality (impacts) are determined by computing the upper and lower limits of the simulation results for total flood volume (failure magnitude) and average flood duration (failure duration) at each link failure level. A new resilience index that combines the failure magnitude and duration into a single metric is applied to quantify system residual functionality at each considered link failure level. With this approach, resilience has been tested and characterised for an existing urban drainage system in Kampala city, Uganda. In addition, the effectiveness of potential adaptation strategies in enhancing its resilience to cumulative link failure has been tested. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

  3. Effective Elastic Modulus of Structured Adhesives: From Biology to Biomimetics

    Directory of Open Access Journals (Sweden)

    Xin Wang

    2017-06-01

    Full Text Available Micro- and nano-hierarchical structures (lamellae, setae, branches, and spatulae on the toe pads of many animals play key roles for generating strong but reversible adhesion for locomotion. The hierarchical structure possesses significantly reduced, effective elastic modulus (Eeff, as compared to the inherent elastic modulus (Einh of the corresponding biological material (and therefore contributes to a better compliance with the counterpart surface. Learning from nature, three types of hierarchical structures (namely self-similar pillar structure, lamella–pillar hybrid structure, and porous structure have been developed and investigated.

  4. Comparison of static and dynamic resilience for a multipurpose reservoir operation

    Science.gov (United States)

    Simonovic, Slobodan P.; Arunkumar, R.

    2016-11-01

    Reliability, resilience, and vulnerability are the traditional risk measures used to assess the performance of a reservoir system. Among these measures, resilience is used to assess the ability of a reservoir system to recover from a failure event. However, the time-independent static resilience does not consider the system characteristics, interaction of various individual components and does not provide much insight into reservoir performance from the beginning of the failure event until the full performance recovery. Knowledge of dynamic reservoir behavior under the disturbance offers opportunities for proactive and/or reactive adaptive response that can be selected to maximize reservoir resilience. A novel measure is required to provide insight into the dynamics of reservoir performance based on the reservoir system characteristics and its adaptive capacity. The reservoir system characteristics include, among others, reservoir storage curve, reservoir inflow, reservoir outflow capacity, and reservoir operating rules. The reservoir adaptive capacity can be expressed using various impacts of reservoir performance under the disturbance (like reservoir release for meeting a particular demand, socioeconomic consequences of reservoir performance, or resulting environmental state of the river upstream and downstream from the reservoir). Another way of expressing reservoir adaptive capacity to a disturbing event may include aggregated measures like reservoir robustness, redundancy, resourcefulness, and rapidity. A novel measure that combines reservoir performance and its adaptive capacity is proposed in this paper and named "dynamic resilience." The paper also proposes a generic simulation methodology for quantifying reservoir resilience as a function of time. The proposed resilience measure is applied to a single multipurpose reservoir operation and tested for a set of failure scenarios. The dynamic behavior of reservoir resilience is captured using the system

  5. Data Qualification and Data Summary Report: Intact Rock Properties Data on Poisson's Ratio and Young's Modulus

    International Nuclear Information System (INIS)

    Cikanek, E.M.; Safley, L.E.; Grant, T.A.

    2003-01-01

    This report reviews all potentially available Yucca Mountain Project (YMP) data in the Technical Data Management System and compiles all relevant qualified data, including data qualified by this report, on elastic properties, Poisson's ratio and Young's modulus, into a single summary Data Tracking Number (DTN) MO0304DQRIRPPR.002. Since DTN MO0304DQRIRPPR.002 was compiled from both qualified and unqualified sources, this report qualifies the DTN in accordance with AP-SIII.2Q. This report also summarizes the individual test results in MO0304DQRIRPPR.002 and provides summary values using descriptive statistics for Poisson's ratio and Young's modulus in a Reference Information Base Data Item. This report found that test conditions such as temperature, saturation, and sample size could influence test results. The largest influence, however, is the lithologic variation within the tuffs themselves. Even though the summary DTN divided the results by lithostratigrahic units within each formation, there was still substantial variation in elastic properties within individual units. This variation was attributed primarily to the presence or absence of lithophysae, fractures, alteration, pumice fragments, and other lithic clasts within the test specimens as well as changes in porosity within the units. As a secondary cause, substantial variations can also be attributed to test conditions such as the type of test (static or dynamic), size of the test specimen, degree of saturation, temperature, and strain rate conditions. This variation is characteristic of the tuffs and the testing methods, and should be considered when using the data summarized in this report

  6. What do you mean, 'resilient geomorphic systems'?

    Science.gov (United States)

    Thoms, M. C.; Piégay, H.; Parsons, M.

    2018-03-01

    Resilience thinking has many parallels in the study of geomorphology. Similarities and intersections exist between the scientific discipline of geomorphology and the scientific concept of resilience. Many of the core themes fundamental to geomorphology are closely related to the key themes of resilience. Applications of resilience thinking in the study of natural and human systems have expanded, based on the fundamental premise that ecosystems, economies, and societies must be managed as linked social-ecological systems. Despite geomorphology and resilience sharing core themes, appreciation is limited of the history and development of geomorphology as a field of scientific endeavor by many in the field of resilience, as well as a limited awareness of the foundations of the former in the more recent emergence of resilience. This potentially limits applications of resilience concepts to the study of geomorphology. In this manuscript we provide a collective examination of geomorphology and resilience as a means to conceptually advance both areas of study, as well as to further cement the relevance and importance of not only understanding the complexities of geomorphic systems in an emerging world of interdisciplinary challenges but also the importance of viewing humans as an intrinsic component of geomorphic systems rather than just an external driver. The application of the concepts of hierarchy and scale, fundamental tenets of the study of geomorphic systems, provide a means to overcome contemporary scale-limited approaches within resilience studies. Resilience offers a framework for geomorphology to expand its application into the broader social-ecological domain.

  7. Chromium effect on the Young modulus and thermoelastic coefficient of elinvars

    International Nuclear Information System (INIS)

    Sazykina, A.V.; Khomenko, O.A.

    1976-01-01

    The effect was studied of thermal and thermal-mechanical treatment upon the elastic modules and its temperature coefficient in iron-nickel Elinvars with different chromium contents (from 0 to 6.7%). It has been shown that doping with chromium results in an increase in the modulus of elasticity of Elinvars after hardening. The elastic modulus of alloys containing no chromium increases after a cold plastic deformation (drawing), whereas that of chromous Elinvars decreases upon such a treatment. It has been established that the elastic modulus of hardened and cold drawn after hardening Elinvars increases upon ageing. An increase in chromium content in iron-nickel Elinvars reduces the effect of the temperature of ageing upon the thermoelastic coefficient during the usual heat treatment and the thermalmechanical treatment and lowers its sensitivity to the influence of an external magnetic field [ru

  8. Determination of the longitudinal modulus of elasticity in structural sawn wooden beams by the least squares method

    Directory of Open Access Journals (Sweden)

    André Luis Christoforo

    2012-12-01

    Full Text Available This paper proposes an alternative method of calculation based on the Least Squares Method to determine the longitudinal modulus of elasticity in structural-sized wooden beams. The developed equations require knowledge of three points of displacements, allowing greater reliability on the dependent variable when using the static four-point bending test. Using the Jatobá (Hymenaea sp wood in the study, the methodology proposed here was used in combination with a simplified one, requiring knowledge of displacement only at the midpoint of the beam in order to compare the results among them. Results show statistical equivalence between the models, indicating a good approximation of the simplified model for calculating the modulus of elasticity in wooden structural bending here evaluated.

  9. Evaluation of Fatigue Life of CRM-Reinforced SMA and Its Relationship to Dynamic Stiffness

    Directory of Open Access Journals (Sweden)

    Nuha Salim Mashaan

    2014-01-01

    Full Text Available Fatigue cracking is an essential problem of asphalt concrete that contributes to pavement damage. Although stone matrix asphalt (SMA has significantly provided resistance to rutting failure, its resistance to fatigue failure is yet to be fully addressed. The aim of this study is to evaluate the effect of crumb rubber modifier (CRM on stiffness and fatigue properties of SMA mixtures at optimum binder content, using four different modification levels, namely, 6%, 8%, 10%, and 12% CRM by weight of the bitumen. The testing undertaken on the asphalt mix comprises the dynamic stiffness (indirect tensile test, dynamic creep (repeated load creep, and fatigue test (indirect tensile fatigue test at temperature of 25°C. The indirect tensile fatigue test was conducted at three different stress levels (200, 300, and 400 kPa. Experimental results indicate that CRM-reinforced SMA mixtures exhibit significantly higher fatigue life compared to the mixtures without CRM. Further, higher correlation coefficient was obtained between the fatigue life and resilient modulus as compared to permanent strain; thus resilient modulus might be a more reliable indicator in evaluating the fatigue life of asphalt mixture.

  10. Evaluation of fatigue life of CRM-reinforced SMA and its relationship to dynamic stiffness.

    Science.gov (United States)

    Mashaan, Nuha Salim; Karim, Mohamed Rehan; Abdel Aziz, Mahrez; Ibrahim, Mohd Rasdan; Katman, Herda Yati; Koting, Suhana

    2014-01-01

    Fatigue cracking is an essential problem of asphalt concrete that contributes to pavement damage. Although stone matrix asphalt (SMA) has significantly provided resistance to rutting failure, its resistance to fatigue failure is yet to be fully addressed. The aim of this study is to evaluate the effect of crumb rubber modifier (CRM) on stiffness and fatigue properties of SMA mixtures at optimum binder content, using four different modification levels, namely, 6%, 8%, 10%, and 12% CRM by weight of the bitumen. The testing undertaken on the asphalt mix comprises the dynamic stiffness (indirect tensile test), dynamic creep (repeated load creep), and fatigue test (indirect tensile fatigue test) at temperature of 25°C. The indirect tensile fatigue test was conducted at three different stress levels (200, 300, and 400 kPa). Experimental results indicate that CRM-reinforced SMA mixtures exhibit significantly higher fatigue life compared to the mixtures without CRM. Further, higher correlation coefficient was obtained between the fatigue life and resilient modulus as compared to permanent strain; thus resilient modulus might be a more reliable indicator in evaluating the fatigue life of asphalt mixture.

  11. Regional employment growth, shocks and regional industrial resilience

    DEFF Research Database (Denmark)

    Holm, Jacob Rubæk; Østergaard, Christian Richter

    2013-01-01

    The resilience of regional industries to economic shocks has gained a lot of attention in evolutionary economic geography recently. This paper uses a novel quantitative approach to investigate the regional industrial resilience of the Danish ICT sector to the shock following the burst of the dot......-com bubble. It is shown that regions characterised by small and young ICT service companies were more adaptable and grew more than others, while diversity and urbanisation increased the sensitivity to the business cycle after the shock. Different types of resilient regions are found: adaptively resilient......, rigidly resilient, entrepreneurially resilient and non-resilient regions....

  12. The Impact of Resilience on Role Stressors and Burnout in Elementary and Secondary Teachers

    Science.gov (United States)

    Richards, K. Andrew; Levesque-Bristol, Chantal; Templin, Thomas J.; Graber, Kim C.

    2016-01-01

    The role of a teacher is becoming increasingly complex, and it is more important than ever that teachers develop resilience to overcome stress and burnout. A conceptual framework to explain the ability of resilience to decrease role stress and burnout was developed and tested. Participants included 415 teachers (174 elementary, 241 secondary) who…

  13. Resilience | Science Inventory | US EPA

    Science.gov (United States)

    Resilience is an important framework for understanding and managing complex systems of people and nature that are subject to abrupt and nonlinear change. The idea of ecological resilience was slow to gain acceptance in the scientific community, taking thirty years to become widely accepted (Gunderson 2000, cited under Original Definition). Currently, the concept is commonplace in academics, management, and policy. Although the idea has quantitative roots in the ecological sciences and was proposed as a measurable quality of ecosystems, the broad use of resilience led to an expansion of definitions and applications. Holling’s original definition, presented in 1973 (Holling 1973, cited under Original Definition), was simply the amount of disturbance that a system can withstand before it shifts into an alternative stability domain. Ecological resilience, therefore, emphasizes that the dynamics of complex systems are nonlinear, meaning that these systems can transition, often abruptly, between dynamic states with substantially different structures, functions, and processes. The transition of ecological systems from one state to another frequently has important repercussions for humans. Recent definitions are more normative and qualitative, especially in the social sciences, and a competing definition, that of engineering resilience, is still often used. Resilience is an emergent phenomenon of complex systems, which means it cannot be deduced from the behavior of t

  14. Measuring county resilience after the 2008 Wenchuan earthquake

    Science.gov (United States)

    Li, X.; Lam, N.; Qiang, Y.; Li, K.; Yin, L.; Liu, S.; Zheng, W.

    2015-01-01

    The catastrophic earthquake in 2008 has caused serious damage to Wenchuan County and the surrounding area in China. In recent years, great attention has been paid to the resilience of the affected area. This study applied a new framework, the Resilience Inference Measurement (RIM) model, to quantify and validate the community resilience of 105 counties in the affected area. The RIM model uses cluster analysis to classify counties into four resilience levels according to the exposure, damage, and recovery conditions, and then applies discriminant analysis to quantify the influence of socioeconomic characteristics on the county resilience. The analysis results show that counties located right at the epicenter had the lowest resilience, but counties immediately adjacent to the epicenter had the highest resilience capacities. Counties that were farther away from the epicenter returned to normal resiliency. The socioeconomic variables, including sex ratio, per capita GDP, percent of ethnic minority, and medical facilities, were identified as the most influential socio-economic characteristics on resilience. This study provides useful information to improve county resilience to earthquakes and support decision-making for sustainable development.

  15. Lack of Resilience Is Related to Stress-Related Sleep Reactivity, Hyperarousal, and Emotion Dysregulation in Insomnia Disorder.

    Science.gov (United States)

    Palagini, Laura; Moretto, Umberto; Novi, Martina; Masci, Isabella; Caruso, Danila; Drake, Christopher L; Riemann, Dieter

    2018-05-15

    According to the diathesis-stress model of insomnia, insomnia may develop in vulnerable individuals in response to stress. Resilience is a psychobiological factor that determines an individual's capacity to adapt successfully to stressful events and low resilience increases vulnerability for development of mental disorders. The aim was to explore resilience in subjects with insomnia and its relationship with the factors that contribute to its development and perpetuation. The study consisted of 58 subjects with Insomnia Disorder according to the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition and 38 good sleepers. Resilience Scale for Adults (RSA), Ford Insomnia Response to Stress Test (FIRST), Pre-sleep Arousal Scale (PSAS), and Difficulties in Emotion Regulation Scale (DERS) were administered while taking into account psychiatric symptoms. Differences in means between groups were assessed using t test or Mann-Whitney U /Wilcoxon test. Linear/multivariable regression analyses and mediation analyses were performed. Subjects with insomnia (24 females, mean age 49 ± 2.1 years) had lower RSA and higher FIRST, DERS, and PSAS scores than good sleepers (22 females, mean age 47.2 ± 1.2 years). After controlling for anxiety/depressive symptoms, low resilience correlated with high stress-related sleep reactivity ( P = .004), pre-sleep cognitive hyperarousal ( P = .01) and emotion dysregulation ( P = .01). Emotion dysregulation mediated the relationship between low resilience and cognitive hyperarousal (Z = 2.06, P = .03). Subjects with insomnia showed low resilience, which was related to high stress-related sleep reactivity, emotional dysregulation, and hyperarousal. If resilience helps to minimize the extent of pathogenesis in the developmental process, an early identification of vulnerable candidates should be useful for preventing insomnia development and maintenance. A commentary on this article appears in this issue on page 709. © 2018 American

  16. Interrogating resilience in health systems development.

    Science.gov (United States)

    van de Pas, Remco; Ashour, Majdi; Kapilashrami, Anuj; Fustukian, Suzanne

    2017-11-01

    The Fourth Global Symposium on Health Systems Research was themed around 'Resilient and responsive health systems for a changing world.' This commentary is the outcome of a panel discussion at the symposium in which the resilience discourse and its use in health systems development was critically interrogated. The 2014-15 Ebola outbreak in West-Africa added momentum for the wider adoption of resilient health systems as a crucial element to prepare for and effectively respond to crisis. The growing salience of resilience in development and health systems debates can be attributed in part to development actors and philanthropies such as the Rockefeller Foundation. Three concerns regarding the application of resilience to health systems development are discussed: (1) the resilience narrative overrules certain democratic procedures and priority setting in public health agendas by 'claiming' an exceptional policy space; (2) resilience compels accepting and maintaining the status quo and excludes alternative imaginations of just and equitable health systems including the socio-political struggles required to attain those; and (3) an empirical case study from Gaza makes the case that resilience and vulnerability are symbiotic with each other rather than providing a solution for developing a strong health system. In conclusion, if the normative aim of health policies is to build sustainable, universally accessible, health systems then resilience is not the answer. The current threats that health systems face demand us to imagine beyond and explore possibilities for global solidarity and justice in health. © The Author 2017. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  17. Arithmetic convergent sequence space defined by modulus function

    Directory of Open Access Journals (Sweden)

    Taja Yaying

    2019-10-01

    Full Text Available The aim of this article is to introduce the sequence spaces $AC(f$ and $AS(f$ using arithmetic convergence and modulus function, and study algebraic and topological properties of this space, and certain inclusion results.

  18. Minimization of complementary energy to predict shear modulus of laminates with intralaminar cracks

    International Nuclear Information System (INIS)

    Giannadakis, K; Varna, J

    2012-01-01

    The most common damage mode and the one examined in this work is the formation of intralaminar cracks in layers of laminates. These cracks can occur when the composite structure is subjected to mechanical and/or thermal loading and eventually lead to degradation of thermo-elastic properties. In the present work, the shear modulus reduction due to cracking is studied. Mathematical models exist in literature for the simple case of cross-ply laminates. The in-plane shear modulus of a damaged laminate is only considered in a few studies. In the current work, the shear modulus reduction in cross-plies will be analysed based on the principle of minimization of complementary energy. Hashin investigated the in-plane shear modulus reduction of cross-ply laminates with cracks in inside 90-layer using this variational approach and assuming that the in-plane shear stress in layers does not depend on the thickness coordinate. In the present study, a more detailed and accurate approach for stress estimation is followed using shape functions for this dependence with parameters obtained by minimization. The results for complementary energy are then compared with the respective from literature and finally an expression for shear modulus degradation is derived.

  19. Effect of curing light emission spectrum on the nanohardness and elastic modulus of two bulk-fill resin composites.

    Science.gov (United States)

    Issa, Yaser; Watts, David C; Boyd, Daniel; Price, Richard B

    2016-04-01

    To determine the nanohardness and elastic moduli of two bulk-fill resin based composites (RBCs) at increasing depths from the surface and increasing distances laterally from the center after light curing. Two bulk-fill dental RBCs: Tetric EvoCeram Bulk Fill (TECBF) and Filtek Bulk Fill Flowable (FBFF) were light cured in a metal mold with a 6mm diameter and a 10mm long semi-circular notch. The RBCs were photo-polymerized for 10s using a light emitting diode (LED) Bluephase Style curing light, with the original light probe that lacked the homogenizer. This light has two blue light and one violet light LED emitters. By changing the probe orientation over the mold, the light output from only two LEDs reached the RBC. Measurements were made using: (i) the light from one violet and one blue LED, and (ii) the light from the two blue LEDs. Five specimens of each RBC were made using each LED orientation (total 20 specimens). Specimens were then stored in the dark at 37°C for 24h. Fifty indents were made using an Agilent G200 nanoindentor down to 4mm from the surface and 2.5mm right and left of the centerline. The results were analyzed (alpha=0.05) using multiple paired-sample t-tests, ANOVA, Bonferroni post-hoc tests, and Pearson correlations. The elastic modulus and nanohardness varied according to the depth and the distance from the centerline. For TECBF, no significant difference was found between the spatial variations in the elastic modulus or hardness values when violet-blue or blue-blue LEDs were used. For FBFF, the elastic modulus and nanohardness on the side exposed to the violet emitter were significantly less than the side exposed to the blue emitter. A strong correlation between nanohardness and elastic modulus was found in all groups (r(2)=0.9512-0.9712). Resin polymerization was not uniform throughout the RBC. The nanohardness and elastic modulus across two RBC materials were found to decline differently according to the orientation of the violet and blue

  20. Social Innovation Systems for Building Resilient Communities

    Directory of Open Access Journals (Sweden)

    Donagh Horgan

    2018-02-01

    Full Text Available Social innovation—while not a new practice in itself—has re-emerged since the global financial crisis in 2008 as an approach to solving our collective intractable global challenges. Despite its renewed popularity, there is no common definition for the phenomenon, not least in the context of its application when planning the built environment or civic infrastructures. This paper seeks to position the practice of social innovation as a means for holistic collaboration between disciplines to develop sustainable social ecologies and systems that provide for resilient communities. It tests a hypothesis that social innovation develops over phases (feedback loops—that of the network, framework and architecture phase—to design for social, environmental and economic resilience. It looks to theories emerging in other subject areas like sociology and technology, that can inform its application in a planning context, such as Actor-Network and Adaptive Complexity theories. It explores the mechanisms that provide for resilience through action research and engagement with a number of international case studies and scenarios. Lastly, the paper identifies further avenues of research pertaining to networks, frameworks and architectures to develop models of best practice for inclusive, sustainable and iterative community development.

  1. Healthy ageing, resilience and wellbeing.

    Science.gov (United States)

    Cosco, T D; Howse, K; Brayne, C

    2017-12-01

    The extension of life does not appear to be slowing, representing a great achievement for mankind as well as a challenge for ageing populations. As we move towards an increasingly older population we will need to find novel ways for individuals to make the best of the challenges they face, as the likelihood of encountering some form of adversity increases with age. Resilience theories share a common idea that individuals who manage to navigate adversity and maintain high levels of functioning demonstrate resilience. Traditional models of healthy ageing suggest that having a high level of functioning across a number of domains is a requirement. The addition of adversity to the healthy ageing model via resilience makes this concept much more accessible and more amenable to the ageing population. Through asset-based approaches, such as the invoking of individual, social and environmental resources, it is hoped that greater resilience can be fostered at a population level. Interventions aimed at fostering greater resilience may take many forms; however, there is great potential to increase social and environmental resources through public policy interventions. The wellbeing of the individual must be the focus of these efforts; quality of life is an integral component to the enjoyment of additional years and should not be overlooked. Therefore, it will become increasingly important to use resilience as a public health concept and to intervene through policy to foster greater resilience by increasing resources available to older people. Fostering wellbeing in the face of increasing adversity has significant implications for ageing individuals and society as a whole.

  2. Resilient behavior characterization of geomaterials for pavement design

    CSIR Research Space (South Africa)

    Anochie-Boateng, Joseph

    2010-08-01

    Full Text Available in the laboratory on the subgrade samples to obtain MR and CBR data to develop the empirical models. The results suggest that constitutive models obtained directly from laboratory test data would be more appropriate to characterize the resilient behavior of subgrade...

  3. High modulus invert analog glass compositions containing beryllia

    Science.gov (United States)

    Bacon, J. F. (Inventor)

    1974-01-01

    Glass compositions having a Young's modulus of at least 15 million psi and a specific modulus of at least 110 million inches consisting essentially of, in mols, 10-45% SiO2, 2-15% Li2O, 3-34% BeO, 12-36% of at least one bivalent oxide selected from the group consisting of CaO, ZnO, MgO and CuO, 10-39% of at least one trivalent oxide selected from the group consisting of Al2O3, B2O3, La2O3, Y2O3 and the mixed rare earth oxides, the total number of said bivalent and trivalent oxides being at least three, and up to 10% of a tetravalent oxide selected from the group consisting of ZrO2, TiO2 and CeO2.

  4. Regional Employment Growth, Shocks and Regional Industrial Resilience

    DEFF Research Database (Denmark)

    Holm, J.R.; Østergaard, Christian Richter

    2015-01-01

    The resilience of regional industries to economic shocks has gained a lot of attention in evolutionary economic geography recently. This paper uses a novel quantitative approach to investigate the regional industrial resilience of the Danish information and communication technology (ICT) sector...... to the shock following the burst of the dot.com bubble. It is shown that regions characterized by small and young ICT service companies were more adaptable and grew more than others, while diversity and urbanization increased the sensitivity to the business cycle after the shock. Different types of resilient...... regions are found: adaptively resilient, rigidly resilient, entrepreneurially resilient and non-resilient regions....

  5. Meaning in life, resilience, and psychological well-being among children affected by parental HIV.

    Science.gov (United States)

    Du, Hongfei; Li, Xiaoming; Chi, Peilian; Zhao, Junfeng; Zhao, Guoxiang

    2017-11-01

    Meaning in life has been posited to improve psychological well-being. People facing adversities can reduce psychological distress through pursuing a sense of purpose in life. However, the effectiveness of meaning in life in promoting psychological well-being has been found varied, and what factors may affect the function of meaning in life remain unclear. In this paper, the authors suggest that resilience, the positive adaptation during or following significant adversity, can strengthen the protective effects of meaning in life on psychological well-being. To test this hypothesis, we analyzed data from a sample of 518 vulnerable children of parents living with HIV about their meaning in life, resilience, depression, and loneliness. Results showed that resilience moderated the relationship between meaning in life and depression, and between meaning in life and loneliness. Meaning in life was associated with lower levels of depression and loneliness among children high in resilience, in comparison to children low in resilience. Future interventions targeting meaning in life and well-being should consider children's resilience, which can allow for better individualization of the treatment.

  6. Measurements of the Young's modulus of hydroxide catalysis bonds, and the effect on thermal noise in ground-based gravitational wave detectors

    Science.gov (United States)

    Phelps, Margot; van Veggel, Anna-Maria; Hough, James; Messenger, Chris; Hughes, David; Cunningham, William; Haughian, Karen; Rowan, Sheila

    2018-05-01

    With the outstanding results from the detection and observation of gravitational waves from coalescing black holes and neutron star inspirals, it is essential that pathways to further improve the sensitivities of the LIGO and VIRGO detectors are explored. There are a number of factors that potentially limit the sensitivities of the detectors. One such factor is thermal noise, a component of which results from the mechanical loss in the bond material between the silica fibre suspensions and the test mass mirrors. To calculate its magnitude, the Young's modulus of the bond material has to be known with reasonable accuracy. In this paper we present a new combination of ultrasonic technology and Bayesian analysis to measure the Young's modulus of hydroxide catalysis bonds between fused silica substrates. Using this novel technique, we measure the bond Young's modulus to be 18.5 ±2.32.0 GPa . We show that by applying this value to thermal noise models of bonded test masses with suitable attachment geometries, a reduction in suspension thermal noise consistent with an overall design sensitivity improvement allows a factor of 5 increase in event rate to be achieved.

  7. Temporal Changes in Community Resilience to Drought Hazard

    Science.gov (United States)

    Mihunov, V.

    2017-12-01

    The threat of droughts and their associated impacts on the landscape and human communities have long been recognized. While considerable research on the climatological aspect of droughts has been conducted, studies on the resilience of human communities to the effects of drought remain limited. Understanding how different communities respond to and recover from the drought hazard, i.e. their community resilience, should inform the development of better strategies to cope with the hazard. This research assesses community resilience to drought hazard in South-Central U.S. and captures the temporal changes of community resilience in the region facing the climate change. First, the study applies the Resilience Inference Measurement (RIM) framework using the existing drought incidence, crop damage, socio-economic and food-water-energy nexus variables, which allows to assign county-level resilience scores in the study region and derive variables contributing to the resilience. Second, it captures the temporal changes in community resilience by using the model extracted from the RIM study and socio-economic data from several consecutive time periods. The resilience measurement study should help understand the complex process underlying communities' response to the drought impacts. The results identify gaps in resilience planning and help the improvement of the community resilience to the droughts of increasing frequency and intensity.

  8. Assessment of Characteristic Function Modulus of Vibroacoustic Signal Given a Limit State Parameter of Diagnosed Equipment

    Science.gov (United States)

    Kostyukov, V. N.; Naumenko, A. P.; Kudryavtseva, I. S.

    2018-01-01

    Improvement of distinguishing criteria, determining defects of machinery and mechanisms, by vibroacoustic signals is a recent problem for technical diagnostics. The work objective is assessment of instantaneous values by methods of statistical decision making theory and risk of regulatory values of characteristic function modulus. The modulus of the characteristic function is determined given a fixed parameter of the characteristic function. It is possible to determine the limits of the modulus, which correspond to different machine’s condition. The data of the modulus values are used as diagnostic features in the vibration diagnostics and monitoring systems. Using such static decision-making methods as: minimum number of wrong decisions, maximum likelihood, minimax, Neumann-Pearson characteristic function modulus limits are determined, separating conditions of a diagnosed object.

  9. Sociotechnical Resilience: A Preliminary Concept.

    Science.gov (United States)

    Amir, Sulfikar; Kant, Vivek

    2018-01-01

    This article presents the concept of sociotechnical resilience by employing an interdisciplinary perspective derived from the fields of science and technology studies, human factors, safety science, organizational studies, and systems engineering. Highlighting the hybrid nature of sociotechnical systems, we identify three main constituents that characterize sociotechnical resilience: informational relations, sociomaterial structures, and anticipatory practices. Further, we frame sociotechnical resilience as undergirded by the notion of transformability with an emphasis on intentional activities, focusing on the ability of sociotechnical systems to shift from one form to another in the aftermath of shock and disturbance. We propose that the triad of relations, structures, and practices are fundamental aspects required to comprehend the resilience of sociotechnical systems during times of crisis. © 2017 Society for Risk Analysis.

  10. Consequence of reduced necrotic bone elastic modulus in a Perthes' hip

    DEFF Research Database (Denmark)

    Salmingo, Remel A.; Skytte, Tina Lercke; Mikkelsen, Lars Pilgaard

    Introduction Perthes is a destructive hip joint disorder characterized as a malformation of the femoral head which affects young children. Several studies have shown the change of mechanical properties of the femoral head in Perthes’ disease. However, the consequence of the changes in bone...... mechanical properties in a Perthes’ hip is not well established. Due to the material differences, changes in bone mechanical properties might lead to localization of stress and deformation. Thus, the objective of this study was to investigate the effects of reduced elastic modulus of necrotic bone...... weight) was applied on the top of the femoral head. The distal part of the femur was fixed. The same Poisson’s ratio 0.3 was set for the femoral and necrotic bone. The elastic modulus (E) of femoral bone was 500 MPa. To investigate the effects of reduced elastic modulus, the necrotic bone E was reduced...

  11. Resilience and Coping After Hospital Mergers.

    Science.gov (United States)

    Russo, Cynthia; Calo, Oriana; Harrison, Georgia; Mahoney, Kathleen; Zavotsky, Kathleen Evanovich

    The aim of this study was to explore the relationship between resilience and coping in frontline nurses working in a healthcare system that has recently undergone a merger. Hospital mergers are common in the current healthcare environment. Mergers can provide hospital nurses the opportunity to use and develop positive coping strategies to help remain resilient during times of change. An anonymous-survey, quantitative, exploratory, descriptive study design was used. Data were obtained from an electronic survey that was made available to all nurses working in a 3-hospital system located in the northeast. Overall, the results showed that, when nurses reported using positive coping strategies, they report higher levels of resilience. The levels of resilience also varied from campus to campus. The campus that has been through 2 recent mergers reported the highest levels of resilience. This study suggests that, during times of change in the workplace, if nurses are encouraged to use positive coping strategies, they may have higher levels of resilience. This changing environment provides the clinical nurse specialists/clinical nurse educators the opportunity to foster and support frontline nurses in the use of healthy coping strategies and to help improve and maintain a high level of resilience, which is critical in today's healthcare environment.

  12. Resilience in IMS

    DEFF Research Database (Denmark)

    Kamyod, Chayapol; Nielsen, Rasmus Hjorth; Prasad, Neeli R.

    2012-01-01

    ) and supporting always on services. Therefore, not only Quality of Service (QoS) but also resilience is required. In this paper, we attempt to evaluate and analyze end-to-end reliability of the IMS system using a model proposed as a combination of Reliability Block Diagram (RBD) and Markov Reward Models (MRMs......Reliability evaluation of systems has been widely researched for improving system resilience especially in designing processes of a complex system. The convergence of different access networks is possible via IP Multimedia Subsystem (IMS) for development toward Next Generation Networks (NGNs......). The resilience of the IMS architecture is studied by applying 1:1 redundancy at different communication scenarios between end users within and across communication domains. The model analysis provides useful reliability characteristics of the system and can be further applied for system design processes....

  13. Multidimensional approach to complex system resilience analysis

    International Nuclear Information System (INIS)

    Gama Dessavre, Dante; Ramirez-Marquez, Jose E.; Barker, Kash

    2016-01-01

    Recent works have attempted to formally define a general metric for quantifying resilience for complex systems as a relationship of performance of the systems against time. The technical content in the proposed work introduces a new model that allows, for the first time, to compare the system resilience among systems (or different modifications to a system), by introducing a new dimension to system resilience models, called stress, to mimic the definition of resilience in material science. The applicability and usefulness of the model is shown with a new heat map visualization proposed in this work, and it is applied to a simulated network resilience case to exemplify its potential benefits. - Highlights: • We analyzed two of the main current metrics of resilience. • We create a new model that relates events with the effects they have. • We develop a novel heat map visualization to compare system resilience. • We showed the model and visualization usefulness in a simulated case.

  14. Resilience Design Patterns - A Structured Approach to Resilience at Extreme Scale (version 1.0)

    Energy Technology Data Exchange (ETDEWEB)

    Hukerikar, Saurabh [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Engelmann, Christian [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-10-01

    Reliability is a serious concern for future extreme-scale high-performance computing (HPC) systems. Projections based on the current generation of HPC systems and technology roadmaps suggest that very high fault rates in future systems. The errors resulting from these faults will propagate and generate various kinds of failures, which may result in outcomes ranging from result corruptions to catastrophic application crashes. Practical limits on power consumption in HPC systems will require future systems to embrace innovative architectures, increasing the levels of hardware and software complexities. The resilience challenge for extreme-scale HPC systems requires management of various hardware and software technologies that are capable of handling a broad set of fault models at accelerated fault rates. These techniques must seek to improve resilience at reasonable overheads to power consumption and performance. While the HPC community has developed various solutions, application-level as well as system-based solutions, the solution space of HPC resilience techniques remains fragmented. There are no formal methods and metrics to investigate and evaluate resilience holistically in HPC systems that consider impact scope, handling coverage, and performance & power eciency across the system stack. Additionally, few of the current approaches are portable to newer architectures and software ecosystems, which are expected to be deployed on future systems. In this document, we develop a structured approach to the management of HPC resilience based on the concept of resilience-based design patterns. A design pattern is a general repeatable solution to a commonly occurring problem. We identify the commonly occurring problems and solutions used to deal with faults, errors and failures in HPC systems. The catalog of resilience design patterns provides designers with reusable design elements. We define a design framework that enhances our understanding of the important

  15. Increased Resilience is Associated with Positive Treatment Outcomes for Veterans with Comorbid PTSD and Substance Use Disorders.

    Science.gov (United States)

    McGuire, Adam P; Mota, Natalie P; Sippel, Lauren M; Connolly, Kevin M; Lyons, Judith A

    2018-04-18

    Resilience has been associated with less severe psychiatric symptomatology and better treatment outcomes among individuals with posttraumatic stress disorder (PTSD) and substance use disorders. However, it remains unknown whether resilience increases during psychotherapy within the comorbid PTSD and substance use disorder population with unique features of dual diagnosis, including trauma cue-related cravings. We tested whether veterans seeking psychotherapy for comorbid PTSD and substance use disorder reported increased resilience from pre- to posttreatment. We also tested whether increased resilience was associated with greater decreases in posttreatment PTSD and substance use disorder symptoms. Participants were 29 male veterans (M age = 49.07 years, SD = 11.24 years) receiving six-week residential day treatment including cognitive processing therapy for PTSD and cognitive behavioral therapy for substance use disorder. Resilience, PTSD symptoms, and trauma cue-related cravings were assessed at pre- and posttreatment. Veterans reported a large, significant increase in resilience posttreatment (M diff = 14.24, t = -4.22, p resilience were significantly associated with fewer PTSD symptoms (β = -0.37, p = .049, sr = -.36) and trauma-cued cravings (β = -0.39, p = .006, sr = -.38) posttreatment when controlling for pretreatment scores and baseline depressive symptoms. Results suggest that evidence-based psychotherapy for comorbid PTSD and substance use disorder may facilitate strength-based psychological growth, which may further promote sustained recovery.

  16. Promoting resilience among nursing students in clinical education.

    Science.gov (United States)

    Thomas, Lisa Jean; Asselin, Marilyn

    2018-01-01

    Resilience is the ability to overcome adversity and grow stronger from the experience. Increased resilience has been shown to positively impact nurses in practice. With this knowledge, recommendations to incorporate resilience training into nursing education have been made. Research, integrative reviews and a theoretical model of resilience in nursing students are explored in this paper. The authors posit that facilitating resilience is important in the setting of clinical education. Through incorporating resilience training in the clinical setting, educators can better prepare students for challenges in their educational environment and ultimately for nursing practice. Specific strategies for clinical educators to incorporate resilience training are suggested. Strategies are organized into three categories, support, education and reflection. The position of facilitating resilience in clinical education may open a discussion for future educational practices. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Distributed Energy Planning for Climate Resilience

    Energy Technology Data Exchange (ETDEWEB)

    Stout, Sherry R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Hotchkiss, Elizabeth L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Day, Megan H [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Lee, Nathan [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Holm, Alison [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2018-05-01

    At various levels of government across the United States and globally climate resilient solutions are being adopted and implemented. Solutions vary based on predicted hazards, community context, priorities, complexity, and available resources. Lessons are being learned through the implementation process, which can be replicated regardless of level or type of government entity carrying out the resiliency planning. Through a number of analyses and technical support across the world, NREL has learned key lessons related to resilience planning associated with power generation and water distribution. Distributed energy generation is a large factor in building resilience with clean energy technologies and solutions. The technical and policy solutions associated with distributed energy implementation for resilience fall into a few major categories, including spatial diversification, microgrids, water-energy nexus, policy, and redundancy.

  18. Particle size dependence of the Young's modulus of filled polymers: 1. Preliminary experiments

    NARCIS (Netherlands)

    Vollenberg, P.H.T.; Heikens, D.

    1989-01-01

    Experimental results are reported from which it appears that in the case of polymer filled with silane-treated glass beads the Young's modulus is, in accordance with present theory, independent of the particle size of the filler. However, if pure glass beads are used as filler, the Young's modulus

  19. Elastic Modulus Measurement of ORNL ATF FeCrAl Alloys

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, Zachary T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Terrani, Kurt A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Yamamoto, Yukinori [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-10-01

    Elastic modulus and Poisson’s ratio for a number of wrought FeCrAl alloys, intended for accident tolerant fuel cladding application, are determined via resonant ultrasonic spectroscopy. The results are reported as a function of temperature from room temperature to 850°C. The wrought alloys were in the fully annealed and unirradiated state. The elastic modulus for the wrought FeCrAl alloys is at least twice that of Zr-based alloys over the temperature range of this study. The Poisson’s ratio of the alloys was 0.28 on average and increased very slightly with increasing temperature.

  20. Team Resilience Training in the Workplace: E-Learning Adaptation, Measurement Model, and Two Pilot Studies.

    Science.gov (United States)

    Bennett, Joel B; Neeper, Michael; Linde, Brittany D; Lucas, Gale M; Simone, Lindsay

    2018-05-02

    The majority of resilience interventions focus on the individual. Workplace resilience is a growing field of research. Given the ever-increasing interconnectedness in businesses, teamwork is a guarantee. There is also growing recognition that resilience functions at the team level. The objective of our work was to address three shortcomings in the study of workplace resilience interventions: lack of interventions focusing on group-level or team resilience, the need for brief interventions, and the need for more theoretical precision in intervention studies. The authors took an established evidence-based program (Team Resilience) and modified it based on these needs. A working model for brief intervention evaluation distinguishes outcomes that are proximal (perceptions that the program improved resilience) and distal (dispositional resilience). A total of 7 hypotheses tested the model and program efficacy. Two samples (n=118 and n=181) of engineering firms received the Web-based training and provided immediate reactions in a posttest-only design. The second sample also included a control condition (n=201). The findings support the model and program efficacy. For example, workplace resilience was greater in the intervention group than in the control group. Other findings suggest social dissemination effects, equal outcomes for employees at different stress levels, and greater benefit for females. This preliminary research provides evidence for the capabilities of e-learning modules to effectively promote workplace resilience and a working model of team resilience. ©Joel B Bennett, Michael Neeper, Brittany D Linde, Gale M Lucas, Lindsay Simone. Originally published in JMIR Mental Health (http://mental.jmir.org), 02.05.2018.

  1. Caregiver Burden Among Caregivers of Individuals With Severe Mental Illness: Testing the Moderation and Mediation Models of Resilience.

    Science.gov (United States)

    Mulud, Zamzaliza Abdul; McCarthy, Geraldine

    2017-02-01

    The association between the socio-demographic characteristics of caregivers, such as gender and caregiver burden, is well documented; however, the process underlying this relationship is poorly understood. Based on the stress process model, we designed a cross-sectional study to examine the mediating and moderating effect of resilience on the relationship between gender and caregiver burden. Caregivers of individuals with severe mental illness (n=201) were recruited in two psychiatric outpatient clinics in Malaysia. The relationship between the gender of the caregiver and caregiver burden was mediated by resilience, thus supporting the stress process model. The findings from the present research contribute to the growing evidence of the interaction between socio-demographic variables of caregivers and resilience, and caregiver burden. Copyright © 2016 Elsevier Inc. All rights reserved.

  2. Effect of bulk modulus on deformation of the brain under rotational accelerations

    Science.gov (United States)

    Ganpule, S.; Daphalapurkar, N. P.; Cetingul, M. P.; Ramesh, K. T.

    2018-01-01

    Traumatic brain injury such as that developed as a consequence of blast is a complex injury with a broad range of symptoms and disabilities. Computational models of brain biomechanics hold promise for illuminating the mechanics of traumatic brain injury and for developing preventive devices. However, reliable material parameters are needed for models to be predictive. Unfortunately, the properties of human brain tissue are difficult to measure, and the bulk modulus of brain tissue in particular is not well characterized. Thus, a wide range of bulk modulus values are used in computational models of brain biomechanics, spanning up to three orders of magnitude in the differences between values. However, the sensitivity of these variations on computational predictions is not known. In this work, we study the sensitivity of a 3D computational human head model to various bulk modulus values. A subject-specific human head model was constructed from T1-weighted MRI images at 2-mm3 voxel resolution. Diffusion tensor imaging provided data on spatial distribution and orientation of axonal fiber bundles for modeling white matter anisotropy. Non-injurious, full-field brain deformations in a human volunteer were used to assess the simulated predictions. The comparison suggests that a bulk modulus value on the order of GPa gives the best agreement with experimentally measured in vivo deformations in the human brain. Further, simulations of injurious loading suggest that bulk modulus values on the order of GPa provide the closest match with the clinical findings in terms of predicated injured regions and extent of injury.

  3. Shear elastic modulus of magnetic gels with random distribution of magnetizable particles

    Science.gov (United States)

    Iskakova, L. Yu; Zubarev, A. Yu

    2017-04-01

    Magnetic gels present new type of composite materials with rich set of uniquie physical properties, which find active applications in many industrial and bio-medical technologies. We present results of mathematically strict theoretical study of elastic modulus of these systems with randomly distributed magnetizable particles in an elastic medium. The results show that an external magnetic field can pronouncedly increase the shear modulus of these composites.

  4. Shear modulus and damping ratio of natural rubber containing carbon nanotubes

    Science.gov (United States)

    Ismail, R.; Ibrahim, A.; Rusop, M.; Adnan, A.

    2018-05-01

    This paper presents the results of an investigation into the potential application of Natural rubber (NR) containing Carbon Nanotubes (CNTs) by measuring its shear modulus and damping ratio. Four different types of rubber specimens which fabricated with different MWCNT loadings: 0 wt% (pure natural rubber), 1 wt%, 3 wt%, and 5 wt%. It is observed that the shear modulus and damping ratio of CNTs filled rubber composites are remarkably higher than that of raw rubber indicating the inherent reinforcing potential of CNTs.

  5. Use of Modulus Mapping Technique to Investigate Cross-sectional Material Properties of Extracted Single Human Trabeculae

    Czech Academy of Sciences Publication Activity Database

    Jiroušek, Ondřej; Kytýř, Daniel; Zlámal, Petr; Doktor, Tomáš; Šepitka, J.; Lukeš, J.

    2012-01-01

    Roč. 106, č. 3 (2012), s. 442-445 ISSN 0009-2770 R&D Projects: GA ČR(CZ) GAP105/10/2305 Institutional support: RVO:68378297 Keywords : modulus mapping * trabecular bone * nanoindentation * micromechanical testing Subject RIV: JJ - Other Materials Impact factor: 0.453, year: 2012 http://www.chemicke-listy.cz/common/content-issue_s3-volume_106-year_2012.html

  6. Determination of young's modulus of PZT and CO80Ni20 thin films by means of micromachined cantilevers

    NARCIS (Netherlands)

    Nazeer, H.; Abelmann, Leon; Tas, Niels Roelof; van Honschoten, J.W.; Siekman, Martin Herman; Elwenspoek, Michael Curt

    2009-01-01

    This paper presents a technique to determine the Young’s modulus and residual stress of thin films using a simple micromachined silicon cantilever as the test structure. An analytical relation was developed based on the shift in resonance frequency caused by the addition of a thin film on the

  7. How Do Communities Use a Participatory Public Health Approach to Build Resilience? The Los Angeles County Community Disaster Resilience Project.

    Science.gov (United States)

    Bromley, Elizabeth; Eisenman, David P; Magana, Aizita; Williams, Malcolm; Kim, Biblia; McCreary, Michael; Chandra, Anita; Wells, Kenneth B

    2017-10-21

    Community resilience is a key concept in the National Health Security Strategy that emphasizes development of multi-sector partnerships and equity through community engagement. Here, we describe the advancement of CR principles through community participatory methods in the Los Angeles County Community Disaster Resilience (LACCDR) initiative. LACCDR, an initiative led by the Los Angeles County Department of Public Health with academic partners, randomized 16 community coalitions to implement either an Enhanced Standard Preparedness or Community Resilience approach over 24 months. Facilitated by a public health nurse or community educator, coalitions comprised government agencies, community-focused organizations and community members. We used thematic analysis of data from focus groups ( n = 5) and interviews ( n = 6 coalition members; n = 16 facilitators) to compare coalitions' strategies for operationalizing community resilience levers of change (engagement, partnership, self-sufficiency, education). We find that strategies that included bidirectional learning helped coalitions understand and adopt resilience principles. Strategies that operationalized community resilience levers in mutually reinforcing ways (e.g., disseminating information while strengthening partnerships) also secured commitment to resilience principles. We review additional challenges and successes in achieving cross-sector collaboration and engaging at-risk groups in the resilience versus preparedness coalitions. The LACCDR example can inform strategies for uptake and implementation of community resilience and uptake of the resilience concept and methods.

  8. How Do Communities Use a Participatory Public Health Approach to Build Resilience? The Los Angeles County Community Disaster Resilience Project

    Directory of Open Access Journals (Sweden)

    Elizabeth Bromley

    2017-10-01

    Full Text Available Community resilience is a key concept in the National Health Security Strategy that emphasizes development of multi-sector partnerships and equity through community engagement. Here, we describe the advancement of CR principles through community participatory methods in the Los Angeles County Community Disaster Resilience (LACCDR initiative. LACCDR, an initiative led by the Los Angeles County Department of Public Health with academic partners, randomized 16 community coalitions to implement either an Enhanced Standard Preparedness or Community Resilience approach over 24 months. Facilitated by a public health nurse or community educator, coalitions comprised government agencies, community-focused organizations and community members. We used thematic analysis of data from focus groups (n = 5 and interviews (n = 6 coalition members; n = 16 facilitators to compare coalitions’ strategies for operationalizing community resilience levers of change (engagement, partnership, self-sufficiency, education. We find that strategies that included bidirectional learning helped coalitions understand and adopt resilience principles. Strategies that operationalized community resilience levers in mutually reinforcing ways (e.g., disseminating information while strengthening partnerships also secured commitment to resilience principles. We review additional challenges and successes in achieving cross-sector collaboration and engaging at-risk groups in the resilience versus preparedness coalitions. The LACCDR example can inform strategies for uptake and implementation of community resilience and uptake of the resilience concept and methods.

  9. Elastic modulus and fracture of boron carbide

    International Nuclear Information System (INIS)

    Hollenberg, G.W.; Walther, G.

    1978-12-01

    The elastic modulus of hot-pressed boron carbide with 1 to 15% porosity was measured at room temperature. K/sub IC/ values were determined for the same porosity range at 500 0 C by the double torsion technique. The critical stress intensity factor of boron carbide with 8% porosity was evaluated from 25 to 1200 0 C

  10. The Resilience-Enabling Value of African Folktales: The Read-Me-To-Resilience Intervention

    Science.gov (United States)

    Theron, Linda; Cockcroft, Kate; Wood, Lesley

    2017-01-01

    Resilience, or the process of adjusting well to adversity, draws on personal and social ecological resources (i.e., caregiving and community supports). Previous research--conducted mostly in the Global North--has shown that bibliotherapy offers a way to support children in identifying and utilizing resilience-enabling resources. In so doing,…

  11. Economic resilience lessons from the ShakeOut earthquake scenario

    Science.gov (United States)

    Wein, A.; Rose, A.

    2011-01-01

    Following a damaging earthquake, “business interruption” (BI)—reduced production of goods and services—begins and continues long after the ground shaking stops. Economic resilience reduces BI losses by making the best use of the resources available at a given point in time (static resilience) or by speeding recovery through repair and reconstruction (dynamic resilience), in contrast to mitigation that prevents damage in the first place. Economic resilience is an important concept to incorporate into economic loss modeling and in recovery and contingency planning. Economic resilience framework includes the applicability of resilience strategies to production inputs and output, demand- and supply-side effects, inherent and adaptive abilities, and levels of the economy. We use our resilience framework to organize and share strategies that enhance economic resilience, identify overlooked resilience strategies, and present evidence and structure of resilience strategies for economic loss modelers. Numerous resilience strategies are compiled from stakeholder discussions about the ShakeOut Scenario (Jones et. al. 2008). Modeled results of ShakeOut BI sector losses reveal variable effectiveness of resilience strategies for lengthy disruptions caused by fire-damaged buildings and water service outages. Resilience is a complement to mitigation and may, in fact, have cost and all-hazards advantages.

  12. Device to measure elastic modulus of superconducting windings

    CERN Multimedia

    CERN PhotoLab

    1979-01-01

    This device was made to measure elastic modulus of the Po dipole superconducting coils. More elaborated devices, but based on the same concept, were later used to measure the apparent elastic moduli of the LHC superconducting magnet coils. See also 7903547X, 7901386.

  13. Measuring Resilience in the Adolescent Population: A Succinct Tool for Outpatient Adolescent Health.

    Science.gov (United States)

    Barger, Jordan; Vitale, Patty; Gaughan, John P; Feldman-Winter, Lori

    2017-10-01

    To create a valid tool to measure adolescent resilience, and to determine if this tool correlates with current participation in risk behaviors and prior adverse childhood events. One hundred adolescents were recruited from primary care clinics in New Jersey for this cross-sectional study. A "7Cs tool" was developed to measure resilience using the 7Cs model of resilience. All participants completed the 7Cs tool, the Adverse Childhood Events Survey, and the Health Survey for Adolescents to identify current risk behaviors. Demographic and background data were also collected. To assess the validity of the 7Cs tool, Cronbach alpha, principal factor analysis, Spearman coefficients, and sensitivity analyses were conducted. The χ 2 test and ORs were used to determine if any relationships exist between resilience and prior adverse childhood events and risk taking behaviors. Participants ranged from 13 to 21 years old (65% female). Internal consistency was established using Cronbach alpha (0.7). Lower resilience correlated with higher adverse childhood events (P = .008) and Health Survey for Adolescents scores (P resilience was associated with increased problems in school (OR 2.6; P = .021), drug use (OR 4.0; P = .004), violent behavior (OR 3.7; P = .002), recent depression (OR 5.0; P resilience was associated with participation in exercise (P = .001) and activities (P = .01). The 7Cs tool is an internally validated tool that may be used to screen adolescent resilience and guide pediatricians' counseling against risk behaviors. Further studies will evaluate resilience-building interventions based on results from this study. Copyright © 2017 Elsevier Inc. All rights reserved.

  14. The Resilience Assessment Framework: a common indicator for land management?

    Science.gov (United States)

    Cowie, Annette; Metternicht, Graciela; O'Connell, Deborah

    2015-04-01

    applicable to all agro-ecosystems, and that involvement of stakeholders is critical to discerning the critical variables to be assessed, the proposed framework uses an iterative participatory approach to characterise the system, considering also interactions across and within scales; identify the controlling variables, and assess proximity to thresholds, and adaptive capacity. The framework consists of four elements: Element A: System description; Element B Assessing the system; Element C Adaptive governance and management; Element D Participatory process. Element D is intended as a cross-cutting element, applying across Elements A to C, although Elements A and B can be applied as a desktop activity in a preliminary assessment. The results of the assessment are synthesised in "Resilience action indicators", that summarise the state of the system with respect to the need to adapt or transform. The presentation will summarise the framework and the responses of expert reviewers who identified strengths of the approach, and challenges for implementation, particularly at program and national scales. The presentation will emphasise the conceptual basis for the approach, and the role of scientists in testing, refining and operationalizing the approach.

  15. Effectiveness of Positive Group Psychotherapy on Resiliency, Happiness and General Health on Women with a Substance Dependence Spouses

    Directory of Open Access Journals (Sweden)

    F sohrabi

    2016-03-01

    Full Text Available The aim of this study was to evaluate the effectiveness of positive group psychotherapy on resiliency, happiness and general health in Women with substance dependent spouse. The research design was quasi - experimental with pre-test, post-test and one-month follow - up with the control group. The sample was comprised of women whom their spouse were referred to addiction clinic. Twenty - four women were selected and randomly assigned to experimental and control groups. Both groups were assessed by Davidson Resilience Scale, Peterson happiness directions questionnaires and General Health Questionnaire (GHQ. Positive group psychotherapy was conducted on the experimental group for 14 sessions, each session lasting 90- minutes. The data was analyzed with ANCOVA. The findings indicated that the mean scores of post-test in the experimental groups on resilience, happiness, and public health, was significantly higher than the mean scores of post-test in control group. Benferroni test was indicating the stable effect of therapy. According to the findings, it can be said that group positive psychotherapy was effective in promoting resiliency, happiness, and general health of women with the dependent drug spouses.

  16. Determining a membrane's shear modulus, independent of its area-dilatation modulus, via capsule flow in a converging micro-capillary.

    Science.gov (United States)

    Dimitrakopoulos, P; Kuriakose, S

    2015-04-14

    Determination of the elastic properties of the membrane of artificial capsules is essential for the better design of the various devices that are utilized in their engineering and biomedical applications. However this task is complicated owing to the combined effects of the shear and area-dilatation moduli on the capsule deformation. Based on computational investigation, we propose a new methodology to determine a membrane's shear modulus, independent of its area-dilatation modulus, by flowing strain-hardening capsules in a converging micro-capillary of comparable size under Stokes flow conditions, and comparing the experimental measurements of the capsule elongation overshooting with computational data. The capsule prestress, if any, can also be determined with the same methodology. The elongation overshooting is practically independent of the viscosity ratio for low and moderate viscosity ratios, and thus a wide range of capsule fluids can be employed. Our proposed experimental device can be readily produced via glass fabrication while owing to the continuous flow in the micro-capillary, the characterization of a large number of artificial capsules is possible.

  17. Resilience of primary healthcare professionals: a systematic review.

    Science.gov (United States)

    Robertson, Helen D; Elliott, Alison M; Burton, Christopher; Iversen, Lisa; Murchie, Peter; Porteous, Terry; Matheson, Catriona

    2016-06-01

    Modern demands and challenges among healthcare professionals can be particularly stressful and resilience is increasingly necessary to maintain an effective, adaptable, and sustainable workforce. However, definitions of, and associations with, resilience have not been examined within the primary care context. To examine definitions and measures of resilience, identify characteristics and components, and synthesise current evidence about resilience in primary healthcare professionals. A systematic review was undertaken to identify studies relating to the primary care setting. Ovid(®), Embase(®), CINAHL, PsycINFO, and Scopus databases were searched in December 2014. Text selections and data extraction were conducted by paired reviewers working independently. Data were extracted on health professional resilience definitions and associated factors. Thirteen studies met the inclusion criteria: eight were quantitative, four qualitative, and one was an intervention study. Resilience, although multifaceted, was commonly defined as involving positive adaptation to adversity. Interactions were identified between personal growth and accomplishment in resilient physicians. Resilience, high persistence, high self-directedness, and low avoidance of challenges were strongly correlated; resilience had significant associations with traits supporting high function levels associated with demanding health professional roles. Current resilience measures do not allow for these different aspects in the primary care context. Health professional resilience is multifaceted, combining discrete personal traits alongside personal, social, and workplace features. A measure for health professional resilience should be developed and validated that may be used in future quantitative research to measure the effect of an intervention to promote it. © British Journal of General Practice 2016.

  18. Resilience concepts in psychiatry demonstrated with bipolar disorder.

    Science.gov (United States)

    Angeler, David G; Allen, Craig R; Persson, Maj-Liz

    2018-02-09

    The term resilience describes stress-response patterns of subjects across scientific disciplines. In ecology, advances have been made to clearly distinguish resilience definitions based on underlying mechanistic assumptions. Engineering resilience (rebound) is used for describing the ability of subjects to recover from adverse conditions (disturbances), and is the rate of recovery. In contrast, the ecological resilience definition considers a systemic change: when complex systems (including humans) respond to disturbances by reorganizing into a new regime (stable state) where structural and functional aspects have fundamentally changed relative to the prior regime. In this context, resilience is an emergent property of complex systems. We argue that both resilience definitions and uses are appropriate in psychology and psychiatry, but although the differences are subtle, the implications and uses are profoundly different. We borrow from the field of ecology to discuss resilience concepts in the mental health sciences. In psychology and psychiatry, the prevailing view of resilience is adaptation to, coping with, and recovery (engineering resilience) from adverse social and environmental conditions. Ecological resilience may be useful for describing vulnerability, onset, and the irreversibility patterns of mental disorders. We discuss this in the context of bipolar disorder. Rebound, adaptation, and coping are processes that are subsumed within the broader systemic organization of humans, from which ecological resilience emanates. Discerning resilience concepts in psychology and psychiatry has potential for a mechanistically appropriate contextualization of mental disorders at large. This might contribute to a refinement of theory and contextualize clinical practice within the broader systemic functioning of mental illnesses.

  19. Clinical correlates of resilience factors in geriatric depression.

    Science.gov (United States)

    Laird, Kelsey T; Lavretsky, Helen; Paholpak, Pattharee; Vlasova, Roza M; Roman, Michael; St Cyr, Natalie; Siddarth, Prabha

    2018-01-16

    Traditional perspectives conceptualize resilience as a trait and depression as resulting from resilience deficiency. However, research indicates that resilience varies substantially even among adults who are clinically depressed, as well as across the lifespan of an individual. Few studies have investigated resilience in depression, and even fewer have examined resilience in depressed older adults. Three hundred thirty-seven adults ≥60 years with major depressive disorder completed the Connor-Davidson Resilience Scale (CD-RISC) and measures of mental health, quality of life (QOL), and medical comorbidity. Exploratory factor analysis was used to explore the factor structure of the CD-RISC. Correlations and general linear models were used to examine associations between resilience and other variables. The rotated component matrix indicated a four-factor model. Sorting of items by highest factor loading revealed constructs associated with (1) grit, (2) active coping self-efficacy, (3) accommodative coping self-efficacy, and (4) spirituality. Resilience was significantly correlated with increased age, lower cognitive functioning, greater cerebrovascular risk, and greater medical comorbidity. Resilience was negatively associated with mental health symptoms (depression, apathy, and anxiety) and positively associated with QOL. The final optimal model identified less depression, less apathy, greater medical comorbidity, higher QOL, and minority (non-White) race as factors that significantly explained variability in resilience. Resilience was significantly associated with a range of mental health constructs in a sample of older adults with depression. Future clinical trials and dismantling studies may help determine whether interventions targeting grit, active coping, accommodative coping, and spirituality can increase resilience and help prevent and treat depression in older adults.

  20. Resilience of primary healthcare professionals: a systematic review

    Science.gov (United States)

    Robertson, Helen D; Elliott, Alison M; Burton, Christopher; Iversen, Lisa; Murchie, Peter; Porteous, Terry; Matheson, Catriona

    2016-01-01

    Background Modern demands and challenges among healthcare professionals can be particularly stressful and resilience is increasingly necessary to maintain an effective, adaptable, and sustainable workforce. However, definitions of, and associations with, resilience have not been examined within the primary care context. Aim To examine definitions and measures of resilience, identify characteristics and components, and synthesise current evidence about resilience in primary healthcare professionals. Design and setting A systematic review was undertaken to identify studies relating to the primary care setting. Method Ovid®, Embase®, CINAHL, PsycINFO, and Scopus databases were searched in December 2014. Text selections and data extraction were conducted by paired reviewers working independently. Data were extracted on health professional resilience definitions and associated factors. Results Thirteen studies met the inclusion criteria: eight were quantitative, four qualitative, and one was an intervention study. Resilience, although multifaceted, was commonly defined as involving positive adaptation to adversity. Interactions were identified between personal growth and accomplishment in resilient physicians. Resilience, high persistence, high self-directedness, and low avoidance of challenges were strongly correlated; resilience had significant associations with traits supporting high function levels associated with demanding health professional roles. Current resilience measures do not allow for these different aspects in the primary care context. Conclusion Health professional resilience is multifaceted, combining discrete personal traits alongside personal, social, and workplace features. A measure for health professional resilience should be developed and validated that may be used in future quantitative research to measure the effect of an intervention to promote it. PMID:27162208

  1. Effect of time of sintering of a castable with andalusite aggregates in the rupture modulus and elastic modulus

    International Nuclear Information System (INIS)

    Oliveira, M.R.; Garcia, G.C.R.; Claudinei, S.; Ribeiro, S.

    2011-01-01

    The studied castable contain andalusite aggregates, and when sintered in temperatures above 1280 deg C, transformed into mullite improving the properties of concrete due to its low expansion and thermal conductivity, creep resistance and thermal shock. The refractory was homogenized in a mixer with 5.5% m/m of water and poured into a metal mold resulting in prismatic bars. After curing for 48 hours, were sintered at 1450 ° C for 0 h, 1 h, 2.5 h and 10 h with heating and cooling rates of 2 ° C / min. The results of elastic modules were, respectively, in GPa: 25.75±1.75, 37.79±0.36, 39.03±1.97 and 54.47±4.01, and rupture, MPa: 8.40±0.78, 11.94±0.68, 10.91±0.91 and 11,34±1.16, showing the increase in elastic modulus for longer times and for times exceeding one hour, no significant changes in results of the modulus of rupture , stabilizing the change of this refractory's properties after the first hour of sintering. (author)

  2. Resilience engineering and the built environment

    DEFF Research Database (Denmark)

    Hollnagel, Erik

    2014-01-01

    important to understand the range of conditions about why and how the system functions in the desired' mode as well as unwanted' modes. Resilience is the capacity to sustain operations under both expected and unexpected conditions. The unexpected conditions are not only threats but also opportunities.......The possible relations between resilience engineering and built environments are explored. Resilience engineering has been concerned with the safe and efficient functioning of large and small industrial systems. These may be described as built systems or artefacts. The resilience engineering...... approach argues that if the performance of systems is to be resilient, then they must be able to respond, monitor, learn and anticipate. The last ability in particular means that they must be able to consider themselves vis-a-vis their environment, i.e. be sentient and reflective systems. In practice...

  3. Alzheimer's aggression: influences on caregiver coping and resilience.

    Science.gov (United States)

    Wilks, Scott E; Little, Kristina G; Gough, Heather R; Spurlock, Wanda J

    2011-04-01

    This study assessed impact of Alzheimer's patients' aggressive behavior (AD aggression) on caregiver coping strategies (task-, emotion-, and avoidance-focused) and caregiver resilience, and examined whether coping strategy moderated the AD aggression-caregiver resilience relationship. Informal caregivers across Louisiana (N = 419) completed surveys with measures of demographics, AD aggression, caregiver coping strategies, and caregiver resilience. Task-focused coping positively related to resilience. Aggression negatively predicted caregiver resilience. Emotion- and avoidance-focused coping strategies separately interacted with aggression and increased its negative relationship to caregiver resilience. Task-focused coping showed no moderation. Implications for social work professionals are discussed.

  4. Mechanical properties of concrete with SAP. Part II: Modulus of elasticity

    DEFF Research Database (Denmark)

    Hasholt, Marianne Tange; Jespersen, Morten H. Seneka; Jensen, Ole Mejlhede

    2010-01-01

    In this study, focus is on the modulus of elasticity for concrete with superabsorbent polymers (SAP). The results show that based on composite theory it is possible to establish a model, which predicts overall concrete elasticity. The model assumes a three phase material of aggregate, cement paste......, and air with volume fractions of the three phases as well as elastic properties of paste and aggregates as input parameters. Addition of SAP changes the E-modulus, because it both has an influence on properties of the cement paste and on the volume of air voids. Here, the E-modulus is an example...... a more or less empirical relation. The results show that when introducing SAP, models of a more empirical nature can be misleading (and e.g. relations stated in codes are often of this empirical nature). The reason is twofold: First, the empirical models often have a general problem with the effect...

  5. Building Resilience through Humor.

    Science.gov (United States)

    Berg, Debra Vande; Van Brockern, Steve

    1995-01-01

    Research on resilience suggests that a sense of humor helps to stress-proof children in conflict. Reports on a workshop for educators and youth workers convened to explore ways humor is being used to foster positive development and resilience with troubled youth. Describes applications of humor front-line professionals report as useful in their…

  6. The influence of resilience on mental health: The role of general well-being.

    Science.gov (United States)

    Gao, Tingting; Ding, Xinna; Chai, Jingxin; Zhang, Zhao; Zhang, Han; Kong, Yixi; Mei, Songli

    2017-06-01

    Nurses are suffering from increasing stress, and nursing is recognized as one of the most stressful job. Their mental health problems are serious and worthy of attention. The purpose of this study was to explore the relationship between resilience and mental health and general well-being among nurses. A cross-sectional survey was conducted in 2014, using a self-reported questionnaire. Participants were asked to complete the measure of resilience, mental health, and general well-being. The method of randomly cluster sampling was used to select nurses as participants. A survey of 365 nurses was conducted to test the hypothesized model. This study showed that resilience, mental health, and general well-being correlated with each other. General well-being was an effective predictor of resilience and mental health, whereas it both can moderate and mediate the relationship. Strategies to increase nurses' general well-being could enhance their resilience and reduce mental health problems. It is important to improve the mental health of nurses and maintain the professional values that ensure career sustainability. © 2017 John Wiley & Sons Australia, Ltd.

  7. A resilience markers framework for small teams

    Energy Technology Data Exchange (ETDEWEB)

    Furniss, Dominic, E-mail: d.furniss@ucl.ac.u [UCL Interaction Centre, University College London, Gower Street, London WC1E 6BT (United Kingdom); Back, Jonathan; Blandford, Ann [UCL Interaction Centre, University College London, Gower Street, London WC1E 6BT (United Kingdom); Hildebrandt, Michael; Broberg, Helena [OECD Halden Reactor Project, PO Box 173, 1751 Halden (Norway)

    2011-01-15

    Processes that enable an effective response to unexpected events and vulnerabilities that lie outside the scope of formal procedures can be described as being resilient. There are many such descriptions of resilience within and across different domains. Comparison and generalisation is difficult because resilience is not a component of a system and should be understood as an emergent property. Here we provide a framework for reasoning about resilience that requires representation of the level of analysis (from the individual to operational), a traceable link from abstract theory to specific observations, resilience mechanisms, and contextual factors. This moves forward an agenda to systematically observe concrete manifestations of resilience within and across domains. We illustrate the application of the framework by considering a case study of the performance of nuclear power plant (NPP) operators in an experimental scenario. This paper focuses on the small team level of analysis. The framework presented here provides the basis for developing concrete measures for improving the resilience of organisations through training, system design, and organisational learning.

  8. A resilience markers framework for small teams

    International Nuclear Information System (INIS)

    Furniss, Dominic; Back, Jonathan; Blandford, Ann; Hildebrandt, Michael; Broberg, Helena

    2011-01-01

    Processes that enable an effective response to unexpected events and vulnerabilities that lie outside the scope of formal procedures can be described as being resilient. There are many such descriptions of resilience within and across different domains. Comparison and generalisation is difficult because resilience is not a component of a system and should be understood as an emergent property. Here we provide a framework for reasoning about resilience that requires representation of the level of analysis (from the individual to operational), a traceable link from abstract theory to specific observations, resilience mechanisms, and contextual factors. This moves forward an agenda to systematically observe concrete manifestations of resilience within and across domains. We illustrate the application of the framework by considering a case study of the performance of nuclear power plant (NPP) operators in an experimental scenario. This paper focuses on the small team level of analysis. The framework presented here provides the basis for developing concrete measures for improving the resilience of organisations through training, system design, and organisational learning.

  9. Systems Measures of Water Distribution System Resilience

    Energy Technology Data Exchange (ETDEWEB)

    Klise, Katherine A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Murray, Regan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Walker, La Tonya Nicole [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-01-01

    Resilience is a concept that is being used increasingly to refer to the capacity of infrastructure systems to be prepared for and able to respond effectively and rapidly to hazardous events. In Section 2 of this report, drinking water hazards, resilience literature, and available resilience tools are presented. Broader definitions, attributes and methods for measuring resilience are presented in Section 3. In Section 4, quantitative systems performance measures for water distribution systems are presented. Finally, in Section 5, the performance measures and their relevance to measuring the resilience of water systems to hazards is discussed along with needed improvements to water distribution system modeling tools.

  10. Whole Community Resilience: Engaging Multiple Sectors with the Coastal Community Resilience Index and the Climate and Resilience Community of Practice in the Gulf of Mexico

    Science.gov (United States)

    Sempier, T.

    2017-12-01

    Communicating risk due to flooding, sea level rise, storm surge, and other natural hazards is a complex task when attempting to build resilience in coastal communities. There are a number of challenges related to preparing for, responding to, and recovering from coastal storms. Successful resilience planning must include a wide range of sectors including, but not limited to local government, business, non-profit, religious, academia, and healthcare. Years of experience working with communities in the Gulf of Mexico has helped create a process that is both inclusive and effective at bringing the right people to the table and gaining momentum towards resilience efforts. The Coastal Community Resilience Index (CRI), a self-assessment for community leaders, has been implemented in 54 Gulf communities with funding that provides small grant awards to help communities take action to address gaps and vulnerabilities identified in the assessment process. To maintain momentum with resilience actions, the Gulf Climate and Resilience Community of Practice (CoP) encourages local municipality participants to share lessons learned and best practices from their implementation projects in an annual symposium. Recently, both graduate and undergraduate students have been exposed to the CRI and CoP as avenues to work through solutions to complex problems at the local level. In addition, a new generation of high school students has been introduced to the CRI. Their engagement in the process is building a more informed citizenry that will take on the leadership and decision-making roles in the future. Investing in multiple age groups and sectors through the CRI and CoP is building capacity for whole community resilience in the Gulf of Mexico. This presentation will focus on methods that have been successful in the Gulf of Mexico for creating effective change in local municipalities towards resilience actions. Discussion will include decision support tools for engaging local

  11. A quantitative framework for assessing ecological resilience

    Science.gov (United States)

    Quantitative approaches to measure and assess resilience are needed to bridge gaps between science, policy, and management. In this paper, we suggest a quantitative framework for assessing ecological resilience. Ecological resilience as an emergent ecosystem phenomenon can be de...

  12. Resilient Renewable Energy Microgrids

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Katherine H [National Renewable Energy Laboratory (NREL), Golden, CO (United States); DiOrio, Nicholas A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Butt, Robert S [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Cutler, Dylan S [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Richards, Allison [Unaffiliated

    2017-11-14

    This presentation for the Cable-Tec Expo 2017 offers information about how renewable microgrids can be used to increase resiliency. It includes information about why renewable energy battery diesel hybrids microgrids should be considered for backup power, how to estimate economic savings of microgrids, quantifying the resiliency gain of microgrids, and where renewable microgrids will be successful.

  13. The Near-IR TRGB Magnitude and Distance Modulus to NGC 185

    Directory of Open Access Journals (Sweden)

    Y.-J. Sohn

    2008-09-01

    Full Text Available We determined values of distance modulus to nearby dwarf galaxy NGC 185 from the Tip of Red-Giant Branch (TRGB method. Apparent magnitudes of the TRGB are estimated from the near-infrared JHK luminosity functions (LFs of the resolved giant branch stars. Theoretical absolute magnitudes of the TRGB in near-infrared bands have been extracted from the Yonsei-Yale isochrones. The observed apparent and theoretical absolute magnitudes of the TRGB provide values of distance modulus to NGC 185 as (m - M.

  14. Vehicle Armor Structure and Testing for Future Combat System

    Science.gov (United States)

    2013-06-03

    D6641 measures the in-plane compressive strength, compressive modulus and in-plane Poisson ratio of fiber reinforced polymer matrix composite...compressive strength, compressive modulus, and in-plane Poisson ratio of fiber reinforced polymer matrix composite materials. In this test, one...compressive modulus and in-plane Poisson ratio of fiber reinforced polymer matrix composite materials. In this test, one fiber orientation is vertical

  15. Achieving enhanced organisational resilience by improved management of risk: Summary of research into the principles of resilience and the practices of resilient organisations.

    Science.gov (United States)

    Hopkin, Paul

    There have been many high-profile incidents in recent times that have affected both individual organisations and large parts of society. In response to these disasters and their consequences, there has been increasing focus on the concept of 'resilience'. Airmic worked with Cranfield School of Management to investigate the features of resilient organisations and whether common characteristics could be identified. The research summarised in this paper discovered five principles that increase an organisation's level of resilence. The paper also reports on the actions taken by organisations to embed these resilience principles into four main business enablers. These business enablers in combination represent the business model of the organisation. The overall conclusion of the research was that, in order to achieve a state of enhanced resilience, organisations need to be aware of risks and threats they face and then combine the actions required to be 'risk compliant' with the ability to be 'risk responsive'.

  16. Social ecology of resilience and Sumud of Palestinians.

    Science.gov (United States)

    Marie, Mohammad; Hannigan, Ben; Jones, Aled

    2018-01-01

    The aim of this article is to provide an overview of theoretical perspectives and practical research knowledge in relation to 'resilience', the resilience of Palestinians in particular and the related concept of 'Sumud'. 'Sumud' is a Palestinian idea that is interwoven with ideas of personal and collective resilience and steadfastness. It is also a socio-political concept and refers to ways of surviving in the context of occupation, chronic adversity, lack of resources and limited infrastructure. The concept of 'resilience' has deep roots, going back at least to the 10th century when Arabic scholars suggested strategies to cope with life adversity. In Europe, research into resilience extends back to the 1800s. The understanding of resilience has developed over four overlapping waves. These focus on individual traits, protective factors, ecological assets and (in the current wave) social ecological factors. The current wave of resilience research focuses on the contribution of cultural contextualisation and is an approach that is discussed in this article, which draws on Arabic and English language literature located through a search of multiple databases (CINAHL, British Nursing Index, ASSIA, MEDLINE, PsycINFO and EMBASE). Findings suggest that 'Sumud' is linked to the surrounding cultural context and can be thought of as an innovative, social ecological, approach to promoting resilience. We show that resilience is a prerequisite to 'Sumud', meaning that the individual has to be resilient in order to stay and not to leave their place, position or community. We close by pressing the case for studies which investigate resilience especially in underdeveloped countries such as Palestine (occupied Palestinian territories), and which reveal how resilience is embedded in pre-existing cultural contexts.

  17. Building Ecological and Community Resilience and Measuring Success of the Department of Interior Hurricane Sandy Resilience Projects

    Science.gov (United States)

    Taylor, S. M.; Worman, S. L.; Bennett, R.; Bassow, A.

    2017-12-01

    The Department of the Interior (DOI) partnered with the National Fish and Wildlife Foundation (NFWF) to administer an external funding competition to support coastal resilience projects in the region affected by Hurricane Sandy. The projects complement the DOI Bureau-led projects, but are led by state and local governments, universities, non-profits, community groups, tribes, and other non-Federal entities. In total, the Hurricane Sandy Resilience Program invested over $750 million in approximately 180 projects to repair damage and improve the resilience of habitats, communities and infrastructure to future storms and sea level rise. Project activities include waterway connection and opening, living shoreline, marsh restoration, community resilience planning, data/mapping/modeling, and beach and dune restoration. DOI and NFWF initiated a resilience assessment in 2015 to evaluate the impact of this investment. The assessment began by clarifying the program's resilience goals and the development of ecological and socio-economic metrics across the project activities. Using these metrics, the evaluation is assessing the ecological and community outcomes, cost effectiveness of activities, improved scientific understanding, and temporal and spatial scaling of benefits across resilience activities. Recognizing the unique opportunity afforded by the scale and distribution of projects, NFWF and DOI have invested in monitoring through 2024 to better understand how these projects perform over time. This presentation will describe the evaluation questions, approach, long-term monitoring, online metrics portal, and findings to date.

  18. Social-ecological resilience and geomorphic systems

    Science.gov (United States)

    Chaffin, Brian C.; Scown, Murray

    2018-03-01

    Governance of coupled social-ecological systems (SESs) and the underlying geomorphic processes that structure and alter Earth's surface is a key challenge for global sustainability amid the increasing uncertainty and change that defines the Anthropocene. Social-ecological resilience as a concept of scientific inquiry has contributed to new understandings of the dynamics of change in SESs, increasing our ability to contextualize and implement governance in these systems. Often, however, the importance of geomorphic change and geomorphological knowledge is somewhat missing from processes employed to inform SES governance. In this contribution, we argue that geomorphology and social-ecological resilience research should be integrated to improve governance toward sustainability. We first provide definitions of engineering, ecological, community, and social-ecological resilience and then explore the use of these concepts within and alongside geomorphology in the literature. While ecological studies often consider geomorphology as an important factor influencing the resilience of ecosystems and geomorphological studies often consider the engineering resilience of geomorphic systems of interest, very few studies define and employ a social-ecological resilience framing and explicitly link the concept to geomorphic systems. We present five key concepts-scale, feedbacks, state or regime, thresholds and regime shifts, and humans as part of the system-which we believe can help explicitly link important aspects of social-ecological resilience inquiry and geomorphological inquiry in order to strengthen the impact of both lines of research. Finally, we discuss how these five concepts might be used to integrate social-ecological resilience and geomorphology to better understand change in, and inform governance of, SESs. To compound these dynamics of resilience, complex systems are nested and cross-scale interactions from smaller and larger scales relative to the system of interest

  19. Developing a community-based flood resilience measurement standard

    Science.gov (United States)

    Keating, Adriana; Szoenyi, Michael; Chaplowe, Scott; McQuistan, Colin; Campbell, Karen

    2015-04-01

    Given the increased attention to resilience-strengthening in international humanitarian and development work, there has been concurrent interest in its measurement and the overall accountability of "resilience strengthening" initiatives. The literature is reaching beyond the polemic of defining resilience to its measurement. Similarly, donors are increasingly expecting organizations to go beyond claiming resilience programing to measuring and showing it. However, key questions must be asked, in particular "Resilience of whom and to what?". There is no one-size-fits-all solution. The approach to measuring resilience is dependent on the audience and the purpose of the measurement exercise. Deriving a resilience measurement system needs to be based on the question it seeks to answer and needs to be specific. This session highlights key lessons from the Zurich Flood Resilience Alliance approach to develop a flood resilience measurement standard to measure and assess the impact of community based flood resilience interventions, and to inform decision-making to enhance the effectiveness of these interventions. We draw on experience in methodology development to-date, together with lessons from application in two case study sites in Latin America. Attention will be given to the use of a consistent measurement methodology for community resilience to floods over time and place; challenges to measuring a complex and dynamic phenomenon such as community resilience; methodological implications of measuring community resilience versus impact on and contribution to this goal; and using measurement and tools such as cost-benefit analysis to prioritize and inform strategic decision making for resilience interventions. The measurement tool follows the five categories of the Sustainable Livelihoods Framework and the 4Rs of complex adaptive systems - robustness, rapidity, redundancy and resourcefulness -5C-4R. A recent white paper by the Zurich Flood Resilience Alliance traces the

  20. Psychometric validation of the French version of the Connor-Davidson Resilience Scale.

    Science.gov (United States)

    Guihard, G; Deumier, L; Alliot-Licht, B; Bouton-Kelly, L; Michaut, C; Quilliot, F

    2018-02-01

    Resilience defines the ability to face adversity with positive outcomes. Different scales, including the 25-item Connor-Davidson Resilience Scale (CDRISC), have been elaborated in order to evaluate resilience among various populations. The evaluation of resilience in French populations was impossible until CDRISC was translated into French. In the present work, we aim to validate a French version of CDRISC (f-CDRISC). The survey was conducted at Nantes University. Both dental and medical students were eligible. The factor structure of f-CDRISC was determined and its replicability was tested on two sub-samples by exploratory factor analysis (EFA) and parallel analysis (PA). A third student sample was used for confirmatory factorial analysis (CFA). We collected 1210 responses. Four items did not reach acceptance thresholds for reliability and were discarded from the f-CDRISC. EFA and PA of the remaining 21 items highlighted a replicable 3-factor structure that was further confirmed by CFA. Resilience factors included "tolerance to negative affects", "tenacity" and "self-confidence". All factors displayed acceptable to good internal consistency. They were characterized by positive medium to strong correlations with the overall f-CDRISC Scale. Significant positive correlations were also observed between the resilience factors. The present work constitutes the first study devoted to a French adaptation of the CDRISC questionnaire. We present evidence showing that the f-CDRISC is a reliable tool for resilience evaluation in French speaking populations. Copyright © 2017 L'Encéphale, Paris. Published by Elsevier Masson SAS. All rights reserved.

  1. Assessment instruments of urban resilience

    Directory of Open Access Journals (Sweden)

    Giovanna Saporiti

    2012-07-01

    Full Text Available The objective of this work is to highlight the aspects related to the resilient capacity of a neoecosistema. Clarifying what does it means to speak about a resilient neoecosistema and which are the specific characters that make him capable of change and adaptation when facing an environmental, social or economic threat, it will be possible to understand the efficacy related to the model of urban development. From the individuation of perturbing factors of this capacity, it will be possible to generate a panel of the resilient capacity linked to three different ambits that represent the three characteristic elements of natural ecosystems: its physic structure, the persons and the interaction processes between them so we would be able to make explicit the specific characters of resilience distinguished from those of sustainability and urban quality.  

  2. Priority Queues Resilient to Memory Faults

    DEFF Research Database (Denmark)

    Jørgensen, Allan Grønlund; Moruz, Gabriel; Mølhave, Thomas

    2007-01-01

    In the faulty-memory RAM model, the content of memory cells can get corrupted at any time during the execution of an algorithm, and a constant number of uncorruptible registers are available. A resilient data structure in this model works correctly on the set of uncorrupted values. In this paper we...... introduce a resilient priority queue. The deletemin operation of a resilient priority queue returns either the minimum uncorrupted element or some corrupted element. Our resilient priority queue uses $O(n)$ space to store $n$ elements. Both insert and deletemin operations are performed in $O(\\log n......+\\delta)$ time amortized, where $\\delta$ is the maximum amount of corruptions tolerated. Our priority queue matches the performance of classical optimal priority queues in the RAM model when the number of corruptions tolerated is $O(\\log n)$. We prove matching worst case lower bounds for resilient priority...

  3. RESILIENCE AND ENTERPRISE ARCHITECTURE IN SMES

    Directory of Open Access Journals (Sweden)

    Rui Gomes

    2015-12-01

    Full Text Available Considering that SMEs need to embrace the drivers of resilience and that a well-defined and readily available Enterprise Architecture (EA supports enterprise integration by enabling the common view of business processes, data and systems across the enterprise and its partners, we can say that EA is one of the tracks making resilience predictable and it should support and collaborate with other resilience tracks. However, the EA frameworks do not give relevance to the activities that contribute most to business resilience, so this paper aims to clarify the dimensions and the activities related to the development of an EA and the touching points with other enterprise wide processes in order to guarantee that resilience requirements are met in SMEs. For this I propose an approach of ecological adaptation, and four architectures: business, organizational, information, and technological, although this paper only presents the Business and Organizational Architectures.

  4. Priority Queues Resilient to Memory Faults

    DEFF Research Database (Denmark)

    Jørgensen, Allan Grønlund; Moruz, Gabriel; Mølhave, Thomas

    2007-01-01

    In the faulty-memory RAM model, the content of memory cells can get corrupted at any time during the execution of an algorithm, and a constant number of uncorruptible registers are available. A resilient data structure in this model works correctly on the set of uncorrupted values. In this paper we...... introduce a resilient priority queue. The deletemin operation of a resilient priority queue returns either the minimum uncorrupted element or some corrupted element. Our resilient priority queue uses $O(n)$ space to store $n$ elements. Both insert and deletemin operations are performed in $O(\\log n...... queues storing only structural information in the uncorruptible registers between operations....

  5. Resilience to Surprises through Communicative Planning

    Directory of Open Access Journals (Sweden)

    Bruce Evan. Goldstein

    2009-12-01

    Full Text Available Resilience thinkers share an interest in collaborative deliberation with communicative planners, who aim to accommodate different forms of knowledge and styles of reasoning to promote social learning and yield creative and equitable agreements. Members of both fields attended a symposium at Virginia Tech in late 2008, where communicative planners considered how social-ecological resilience informed new possibilities for planning practice beyond disaster mitigation and response. In turn, communicative planners offered resilience scholars ideas about how collaboration could accomplish more than enhance rational decision making of the commons. Through these exchanges, the symposium fostered ideas about collaborative governance and the critical role of expertise in fostering communicative resilience.

  6. Cationic agent contrast-enhanced computed tomography imaging of cartilage correlates with the compressive modulus and coefficient of friction.

    Science.gov (United States)

    Lakin, B A; Grasso, D J; Shah, S S; Stewart, R C; Bansal, P N; Freedman, J D; Grinstaff, M W; Snyder, B D

    2013-01-01

    The aim of this study is to evaluate whether contrast-enhanced computed tomography (CECT) attenuation, using a cationic contrast agent (CA4+), correlates with the equilibrium compressive modulus (E) and coefficient of friction (μ) of ex vivo bovine articular cartilage. Correlations between CECT attenuation and E (Group 1, n = 12) and μ (Group 2, n = 10) were determined using 7 mm diameter bovine osteochondral plugs from the stifle joints of six freshly slaughtered, skeletally mature cows. The equilibrium compressive modulus was measured using a four-step, unconfined, compressive stress-relaxation test, and the coefficients of friction were determined from a torsional friction test. Following mechanical testing, samples were immersed in CA4+, imaged using μCT, rinsed, and analyzed for glycosaminoglycan (GAG) content using the 1,9-dimethylmethylene blue (DMMB) assay. The CECT attenuation was positively correlated with the GAG content of bovine cartilage (R(2) = 0.87, P coefficients of friction: CECT vs μ(static) (R(2) = 0.71, P = 0.002), CECT vs μ(static_equilibrium) (R(2) = 0.79, P coefficient of friction. Copyright © 2012 Osteoarthritis Research Society International. Published by Elsevier Ltd. All rights reserved.

  7. Social-ecological resilience and law

    Science.gov (United States)

    Garmestani, Ahjond S.; Allen, Craig R.

    2014-01-01

    Environmental law envisions ecological systems as existing in an equilibrium state, reinforcing a rigid legal framework unable to absorb rapid environmental changes and innovations in sustainability. For the past four decades, “resilience theory,” which embraces uncertainty and nonlinear dynamics in complex adaptive systems, has provided a robust, invaluable foundation for sound environmental management. Reforming American law to incorporate this knowledge is the key to sustainability. This volume features top legal and resilience scholars speaking on resilience theory and its legal applications to climate change, biodiversity, national parks, and water law.

  8. Resilience in ecotoxicology: Toward a multiple equilibrium concept.

    Science.gov (United States)

    Bundschuh, Mirco; Schulz, Ralf; Schäfer, Ralf B; Allen, Craig R; Angeler, David G

    2017-10-01

    The term resilience describes stress-response patterns across scientific disciplines. In ecology, advances have been made to clearly define resilience based on underlying mechanistic assumptions. Engineering resilience (rebound) is used to describe the ability of organisms to recover from adverse conditions (disturbances), which is termed the rate of recovery. By contrast, the ecological resilience definition considers a systemic change, that is, when ecosystems reorganize into a new regime following disturbance. Under this new regime, structural and functional aspects change considerably relative to the previous regime, without recovery. In this context, resilience is an emergent property of complex systems. In the present study, we argue that both definitions and uses are appropriate in ecotoxicology, and although the differences are subtle, the implications and uses are profoundly different. We discuss resilience concepts in ecotoxicology, where the prevailing view of resilience is engineering resilience from chemical stress. Ecological resilience may also be useful for describing systemic ecological changes because of chemical stress. We present quantitative methods that allow ecotoxicologists and risk managers to assess whether an ecosystem faces an impending regime shift or whether it has already undergone such a shift. We contend that engineering and ecological resilience help to distinguish ecotoxicological responses to chemical stressors mechanistically and thus have implications for theory, policy, and application. Environ Toxicol Chem 2017;36:2574-2580. © 2017 SETAC. © 2017 SETAC.

  9. A New Resilience Measure for Supply Chain Networks

    Directory of Open Access Journals (Sweden)

    Ruiying Li

    2017-01-01

    Full Text Available Currently, supply chain networks can span the whole world, and any disruption of these networks may cause economic losses, decreases in sales and unsustainable supplies. Resilience, the ability of the system to withstand disruption and return to a normal state quickly, has become a new challenge during the supply chain network design. This paper defines a new resilience measure as the ratio of the integral of the normalized system performance within its maximum allowable recovery time after the disruption to the integral of the performance in the normal state. Using the maximum allowable recovery time of the system as the time interval under consideration, this measure allows the resilience of different systems to be compared on the same relative scale, and be used under both scenarios that the system can or cannot restore in the given time. Two specific resilience measures, the resilience based on the amount of product delivered and the resilience based on the average delivery distance, are provided for supply chain networks. To estimate the resilience of a given supply chain network, a resilience simulation method is proposed based on the Monte Carlo method. A four-layered hierarchial mobile phone supply chain network is used to illustrate the resilience quantification process and show how network structure affects the resilience of supply chain networks.

  10. Young's modulus of elasticity of Schlemm's canal endothelial cells.

    Science.gov (United States)

    Zeng, Dehong; Juzkiw, Taras; Read, A Thomas; Chan, Darren W-H; Glucksberg, Matthew R; Ethier, C Ross; Johnson, Mark

    2010-02-01

    Schlemm's canal (SC) endothelial cells are likely important in the physiology and pathophysiology of the aqueous drainage system of the eye, particularly in glaucoma. The mechanical stiffness of these cells determines, in part, the extent to which they can support a pressure gradient and thus can be used to place limits on the flow resistance that this layer can generate in the eye. However, little is known about the biomechanical properties of SC endothelial cells. Our goal in this study was to estimate the effective Young's modulus of elasticity of normal SC cells. To do so, we combined magnetic pulling cytometry of isolated cultured human SC cells with finite element modeling of the mechanical response of the cell to traction forces applied by adherent beads. Preliminary work showed that the immersion angles of beads attached to the SC cells had a major influence on bead response; therefore, we also measured bead immersion angle by confocal microscopy, using an empirical technique to correct for axial distortion of the confocal images. Our results showed that the upper bound for the effective Young's modulus of elasticity of the cultured SC cells examined in this study, in central, non-nuclear regions, ranged between 1,007 and 3,053 Pa, which is similar to, although somewhat larger than values that have been measured for other endothelial cell types. We compared these values to estimates of the modulus of primate SC cells in vivo, based on images of these cells under pressure loading, and found good agreement at low intraocular pressure (8-15 mm Hg). However, increasing intraocular pressure (22-30 mm Hg) appeared to cause a significant increase in the modulus of these cells. These moduli can be used to estimate the extent to which SC cells deform in response to the pressure drop across the inner wall endothelium and thereby estimate the extent to which they can generate outflow resistance.

  11. Influence of dynamic strain ageing on tensile strain energy of type 316L(N) austenitic stainless steel

    International Nuclear Information System (INIS)

    Isaac Samuel, B.; Choudhary, B.K.; Bhanu Sankara Rao, K.

    2010-01-01

    Tensile tests were conducted on type 316 L(N) stainless steel over a wide temperature range of 300-1123 K employing strain rates ranging from 3.16 X 10 -5 to 3.16 X 10 -3/s . The variation of strain energy in terms of modulus of resilience and modulus of toughness over the wide range of temperatures and strain rates were examined. The variation in modulus of resilience with temperature and strain rate did not show the signatures of dynamic strain ageing (DSA). However, the modulus of toughness exhibited a plateau at the intermediate temperatures of 523-1023 K. Further, the distribution of energy absorbed till necking and energy absorbed from necking till fracture were found to characterise the deformation and damage processes, respectively, and exhibited anomalous variations in the temperature range 523-823 K and 823-1023 K, respectively. In addition to the observed manifestations of DSA such as serrated load-elongation curve, peaks/plateaus in flow stress, ultimate tensile strength and work hardening rate, negative strain rate sensitivity and ductility minima, the observed anomalous variations in modulus of toughness at intermediate temperatures (523-1023 K) can be regarded as yet another key manifestation of DSA. At temperatures above 1023 K, a sharp decrease in the modulus of toughness and also in the strain energies up to necking and from necking to fracture observed, with increasing temperature and decreasing strain rate, reveal the onset of dynamic recovery leading to early cross slip and climb processes. (author)

  12. Resilient mounting systems in buildings

    NARCIS (Netherlands)

    Breeuwer, R.; Tukker, J.C.

    1976-01-01

    The basic elements of resilient mounting systems are described and various measures for quantifying the effect of such systems defined. Using electrical analogue circuits, the calculation of these measures is illustrated. With special reference to resilient mounting systems in buildings, under

  13. Neurite extension and neuronal differentiation of human induced pluripotent stem cell derived neural stem cells on polyethylene glycol hydrogels containing a continuous Young's Modulus gradient.

    Science.gov (United States)

    Mosley, Matthew C; Lim, Hyun Ju; Chen, Jing; Yang, Yueh-Hsun; Li, Shenglan; Liu, Ying; Smith Callahan, Laura A

    2017-03-01

    Mechanotransduction in neural cells involves multiple signaling pathways that are not fully understood. Differences in lineage and maturation state are suggested causes for conflicting reports on neural cell mechanosensitivity. To optimize matrices for use in stem cell therapy treatments transplanting human induced pluripotent stem cell derived neural stem cells (hNSC) into lesions after spinal cord injury, the effects of Young's Modulus changes on hNSC behavior must be understood. The present study utilizes polyethylene glycol hydrogels containing a continuous gradient in Young's modulus to examine changes in the Young's Modulus of the culture substrate on hNSC neurite extension and neural differentiation. Changes in the Young's Modulus of the polyethylene glycol hydrogels was found to affect neurite extension and cellular organization on the matrices. hNSC cultured on 907 Pa hydrogels were found to extend longer neurites than hNSC cultured on other tested Young's Moduli hydrogels. The gene expression of β tubulin III and microtubule-associated protein 2 in hNSC was affected by changes in the Young's Modulus of the hydrogel. The combinatory method approach used in the present study demonstrates that hNSC are mechanosensitive and the matrix Young's Modulus should be a design consideration for hNSC transplant applications. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 824-833, 2017. © 2016 Wiley Periodicals, Inc.

  14. Application of diffusion barriers to high modulus fibers

    Science.gov (United States)

    Veltri, R. D.; Douglas, F. C.; Paradis, E. L.; Galasso, F. S.

    1977-01-01

    Barrier layers were coated onto high-modulus fibers, and nickel and titanium layers were overcoated as simulated matrix materials. The objective was to coat the high-strength fibers with unreactive selected materials without degrading the fibers. The fibers were tungsten, niobium, and single-crystal sapphire, while the materials used as barrier coating layers were Al2O3, Y2O3, TiC, ZrC, WC with 14% Co, and HfO2. An ion-plating technique was used to coat the fibers. The fibers were subjected to high-temperature heat treatments to evaluate the effectiveness of the barrier layer in preventing fiber-metal interactions. Results indicate that Al2O3, Y2O3, and HfO2 can be used as barrier layers to minimize the nickel-tungsten interaction. Further investigation, including thermal cycling tests at 1090 C, revealed that HfO2 is probably the best of the three.

  15. Study of General health, resiliency, and defense mechanisms in patients with migraine headache

    Directory of Open Access Journals (Sweden)

    Alireza Aghayusefi

    2013-06-01

    Full Text Available Background: Migraine is a neurological disease that the etiology, several factors affect its onset or its exacerbation. One of the factors affecting disease is psychological factors such as defense mechanisms, resiliency, and general health. This study assessed the relationship between general health, resiliency, and general defense mechanisms, and also predicts the general health of people with migraine headaches that have a high resiliency and use mature defense mechanisms. Material and Methods: 50 women with migraine headache in the city of Bushehr using defense mechanisms, resiliency, and general health questionnaires were studied. For statistical analysis, Pearson correlation and multiple regression tests were used by SPSS 17 software. Results: The results showed that most of the defense mechanisms of migraine sufferers are Immature and Neuroticism. There is significant negative correlation between the deterioration of general health and resiliency as well as the mature defense mechanism (p=0/003, and also there is a significant positive correlation between this deterioration with neuroticism (p=0/040 and immature defense mechanisms (p=0/041. On the other hand there is significant negative correlation between resiliencies with immature (p=0/009 and neuroticism defense mechanisms (p=0/04, and also with mature defense mechanism has a significant positive correlation (p=0/003. Also, as more people use the mature defense mechanism, their deterioration of general health will be reduced, but this relationship will be stronger with the presence of resiliency. So migraine people use the mature defense mechanisms with high resiliency will have more favorable general health (less deterioration of general health. Conclusion: This study showed that migraine patients use the mature defense mechanisms with high resiliency will have more favorable general health (less deterioration of general health.

  16. Dynamic determination of modulus of elasticity of full-size wood composite panels using a vibration method

    Science.gov (United States)

    Cheng Guan; Houjiang Zhang; Lujing Zhou; Xiping Wang

    2015-01-01

    A vibration testing method based on free vibration theory in a ‘‘free–free” support condition was investigated for evaluating the modulus of elasticity (MOE) of full-size wood composite panels (WCPs). Vibration experiments were conducted on three types of WCPs (medium density fibreboard, particleboard, and plywood) to determine the dynamic MOE of the panels. Static...

  17. A comprehensive approach to assess operational resilience

    NARCIS (Netherlands)

    Stolker, R.J.M.; Karydas, D.M.; Rouvroye, J.L.; Hollnagel, E.; Pieri, F.

    2008-01-01

    This paper presents a first attempt to apply Multi-Attribute Utility Theory (MAUT) to the concept of resilience. The focus of this paper is measuring the management performance of operational resilience in an organization. Operational resilience refers to the ability of an organization to prevent

  18. Validation of the Resilience Scale for Adolescents in Norwegian adolescents 13-18 years.

    Science.gov (United States)

    Moksnes, Unni K; Haugan, Gørill

    2018-03-01

    Resilience is seen as a vital resource for coping and mental health in adolescents. However, there is no universally accepted theory or definition of resilience, leading to considerable challenges regarding how to operationalise and measure this construct. The study aimed at providing further knowledge of the psychometric properties (dimensionality, construct validity and internal consistency) of the 28-item version of the Resilience Scale for Adolescents (READ) in N = 1183 Norwegian adolescents, 13-18 years old. Dimensionality of READ was tested using confirmatory factor analysis (CFA). Convergent validity and reliability were tested using Pearson's correlation analysis, Cronbach's alpha and composite reliability. The CFA supported a modified, 20-item, five-factor structure with high reliability, supporting the dimensionality and internal consistency of the instrument. Convergent validity was confirmed where all factors correlated in expected directions with measures of sense of coherence, self-esteem, stress and depression. The psychometric properties of the READ need to be further evaluated in adolescents; however, the results indicate that a modified 20-item version of READ is adequate for assessing resilience in the present sample of Norwegian adolescents. © 2017 Nordic College of Caring Science.

  19. Elastic modulus, thermal expansion, and specific heat at a phase transition

    International Nuclear Information System (INIS)

    Testardi, L.R.

    1975-01-01

    The interrelation of the elastic modulus, thermal-expansion coefficient, and specific heat of a transformed phase relative to the untransformed phase is calculated assuming a particular but useful form of the thermodynamic potential. For second-order phase transitions where this potential applies, measurements of modulus, expansion, and specific heat can yield the general (longitudinal as well as shear) first- and second-order stress (or strain) dependences of the transition temperature and of the order parameter at absolute zero. An exemplary application to one type of phase transition is given

  20. Prioritizing key resilience indicators to support coral reef management in a changing climate.

    Science.gov (United States)

    McClanahan, Tim R; Donner, Simon D; Maynard, Jeffrey A; MacNeil, M Aaron; Graham, Nicholas A J; Maina, Joseph; Baker, Andrew C; Alemu I, Jahson B; Beger, Maria; Campbell, Stuart J; Darling, Emily S; Eakin, C Mark; Heron, Scott F; Jupiter, Stacy D; Lundquist, Carolyn J; McLeod, Elizabeth; Mumby, Peter J; Paddack, Michelle J; Selig, Elizabeth R; van Woesik, Robert

    2012-01-01

    Managing coral reefs for resilience to climate change is a popular concept but has been difficult to implement because the empirical scientific evidence has either not been evaluated or is sometimes unsupportive of theory, which leads to uncertainty when considering methods and identifying priority reefs. We asked experts and reviewed the scientific literature for guidance on the multiple physical and biological factors that affect the ability of coral reefs to resist and recover from climate disturbance. Eleven key factors to inform decisions based on scaling scientific evidence and the achievability of quantifying the factors were identified. Factors important to resistance and recovery, which are important components of resilience, were not strongly related, and should be assessed independently. The abundance of resistant (heat-tolerant) coral species and past temperature variability were perceived to provide the greatest resistance to climate change, while coral recruitment rates, and macroalgae abundance were most influential in the recovery process. Based on the 11 key factors, we tested an evidence-based framework for climate change resilience in an Indonesian marine protected area. The results suggest our evidence-weighted framework improved upon existing un-weighted methods in terms of characterizing resilience and distinguishing priority sites. The evaluation supports the concept that, despite high ecological complexity, relatively few strong variables can be important in influencing ecosystem dynamics. This is the first rigorous assessment of factors promoting coral reef resilience based on their perceived importance, empirical evidence, and feasibility of measurement. There were few differences between scientists' perceptions of factor importance and the scientific evidence found in journal publications but more before and after impact studies will be required to fully test the validity of all the factors. The methods here will increase the feasibility

  1. Lateral Earth Pressure at Rest and Shear Modulus Measurements on Hanford Sludge Simulants

    Energy Technology Data Exchange (ETDEWEB)

    Wells, Beric E.; Jenks, Jeromy WJ; Boeringa, Gregory K.; Bauman, Nathan N.; Guzman, Anthony D.; Arduino, P.; Keller, P. J.

    2010-09-30

    This report describes the equipment, techniques, and results of lateral earth pressure at rest and shear modulus measurements on kaolin clay as well as two chemical sludge simulants. The testing was performed in support of the problem of hydrogen gas retention and release encountered in the double- shell tanks (DSTs) at the Hanford Site near Richland, Washington. Wastes from single-shell tanks (SSTs) are being transferred to double-shell tanks (DSTs) for safety reasons (some SSTs are leaking or are in danger of leaking), but the available DST space is limited.

  2. Primary school teachers' resilience and their readiness for enhancing children's resilience

    OpenAIRE

    Bon, Barbara

    2017-01-01

    Resilience is an important trait, which enables people to successfully recover from difficulties and stress. For teachers, resilience is of vital importance, as it offers different ways and solutions to successfully cope with difficult and stressful situations they face on a daily basis. The way teachers experience and react to stress often affects their pupils, who are under a lot of stress as well. Teachers could help and teach them how to cope with stressful situations by spending some sch...

  3. Aluminum oxide from trimethylaluminum and water by atomic layer deposition: The temperature dependence of residual stress, elastic modulus, hardness and adhesion

    International Nuclear Information System (INIS)

    Ylivaara, Oili M.E.; Liu, Xuwen; Kilpi, Lauri; Lyytinen, Jussi; Schneider, Dieter; Laitinen, Mikko; Julin, Jaakko; Ali, Saima; Sintonen, Sakari; Berdova, Maria; Haimi, Eero; Sajavaara, Timo; Ronkainen, Helena; Lipsanen, Harri

    2014-01-01

    Use of atomic layer deposition (ALD) in microelectromechanical systems (MEMS) has increased as ALD enables conformal growth on 3-dimensional structures at relatively low temperatures. For MEMS device design and fabrication, the understanding of stress and mechanical properties such as elastic modulus, hardness and adhesion of thin film is crucial. In this work a comprehensive characterization of the stress, elastic modulus, hardness and adhesion of ALD aluminum oxide (Al 2 O 3 ) films grown at 110–300 °C from trimethylaluminum and water is presented. Film stress was analyzed by wafer curvature measurements, elastic modulus by nanoindentation and surface-acoustic wave measurements, hardness by nanoindentation and adhesion by microscratch test and scanning nanowear. The films were also analyzed by ellipsometry, optical reflectometry, X-ray reflectivity and time-of-flight elastic recoil detection for refractive index, thickness, density and impurities. The ALD Al 2 O 3 films were under tensile stress in the scale of hundreds of MPa. The magnitude of the stress decreased strongly with increasing ALD temperature. The stress was stable during storage in air. Elastic modulus and hardness of ALD Al 2 O 3 saturated to a fairly constant value for growth at 150 to 300 °C, while ALD at 110 °C gave softer films with lower modulus. ALD Al 2 O 3 films adhered strongly on cleaned silicon with SiO x termination. - Highlights: • The residual stress of Al 2 O 3 was tensile and stable during the storage in air. • Elastic modulus of Al 2 O 3 saturated to at 170 GPa for films grown at 150 to 300 °C. • At 110 °C Al 2 O 3 films were softer with high residual hydrogen and lower density. • The Al 2 O 3 adhered strongly on the SiO x -terminated silicon

  4. Tendon material properties vary and are interdependent among turkey hindlimb muscles.

    Science.gov (United States)

    Matson, Andrew; Konow, Nicolai; Miller, Samuel; Konow, Pernille P; Roberts, Thomas J

    2012-10-15

    The material properties of a tendon affect its ability to store and return elastic energy, resist damage, provide mechanical feedback and amplify or attenuate muscle power. While the structural properties of a tendon are known to respond to a variety of stimuli, the extent to which material properties vary among individual muscles remains unclear. We studied the tendons of six different muscles in the hindlimb of Eastern wild turkeys to determine whether there was variation in elastic modulus, ultimate tensile strength and resilience. A hydraulic testing machine was used to measure tendon force during quasi-static lengthening, and a stress-strain curve was constructed. There was substantial variation in tendon material properties among different muscles. Average elastic modulus differed significantly between some tendons, and values for the six different tendons varied nearly twofold, from 829±140 to 1479±106 MPa. Tendons were stretched to failure, and the stress at failure, or ultimate tensile stress, was taken as a lower-limit estimate of tendon strength. Breaking tests for four of the tendons revealed significant variation in ultimate tensile stress, ranging from 66.83±14.34 to 112.37±9.39 MPa. Resilience, or the fraction of energy returned in cyclic length changes was generally high, and one of the four tendons tested was significantly different in resilience from the other tendons (range: 90.65±0.83 to 94.02±0.71%). An analysis of correlation between material properties revealed a positive relationship between ultimate tensile strength and elastic modulus (r(2)=0.79). Specifically, stiffer tendons were stronger, and we suggest that this correlation results from a constrained value of breaking strain, which did not vary significantly among tendons. This finding suggests an interdependence of material properties that may have a structural basis and may explain some adaptive responses observed in studies of tendon plasticity.

  5. How Robust is Your System Resilience?

    Science.gov (United States)

    Homayounfar, M.; Muneepeerakul, R.

    2017-12-01

    Robustness and resilience are concepts in system thinking that have grown in importance and popularity. For many complex social-ecological systems, however, robustness and resilience are difficult to quantify and the connections and trade-offs between them difficult to study. Most studies have either focused on qualitative approaches to discuss their connections or considered only one of them under particular classes of disturbances. In this study, we present an analytical framework to address the linkage between robustness and resilience more systematically. Our analysis is based on a stylized dynamical model that operationalizes a widely used concept framework for social-ecological systems. The model enables us to rigorously define robustness and resilience and consequently investigate their connections. The results reveal the tradeoffs among performance, robustness, and resilience. They also show how the nature of the such tradeoffs varies with the choices of certain policies (e.g., taxation and investment in public infrastructure), internal stresses and external disturbances.

  6. A Two-Step Methodology to Study the Influence of Aggregation/Agglomeration of Nanoparticles on Young's Modulus of Polymer Nanocomposites

    Science.gov (United States)

    Ma, Xinyue; Zare, Yasser; Rhee, Kyong Yop

    2017-12-01

    A two-step technique based on micromechanical models is suggested to determine the influence of aggregated/agglomerated nanoparticles on Young's modulus of polymer nanocomposites. The nanocomposite is assumed to include nanoparticle aggregation/agglomeration and effective matrix phases. This method is examined for different samples, and the effects of important parameters on the modulus are investigated. Moreover, the highest and the lowest levels of predicted modulus are calculated based on the current methodology. The suggested technique can correctly predict Young's modulus for the samples assuming the aggregation/agglomeration of nanoparticles. Additionally, the aggregation/agglomeration of nanoparticles decreases Young's modulus of polymer nanocomposites. It is demonstrated that the high modulus of nanoparticles is not sufficient to obtain a high modulus in nanocomposites, and the surface chemistry of components should be adjusted to prevent aggregation/agglomeration and to disperse nano-sized particles in the polymer matrix.

  7. Depression and Resilience in Breast Cancer Patients

    Directory of Open Access Journals (Sweden)

    Gordana Ristevska-Dimitrоvska

    2015-11-01

    CONCLUSION: This study shows that patients who are less depressed have higher levels of resilience and that psychological resilience may independently contribute to lower levels of depression among breast cancer patients. The level of psychological resilience may be a protective factor for depression and psychological distress.

  8. Risk Behavior and Personal Resiliency in Adolescents

    Science.gov (United States)

    Prince-Embury, Sandra

    2015-01-01

    This study explores the relationship between self-reported risk behaviors and personal resiliency in adolescents; specifically whether youth with higher personal resiliency report less frequent risk behaviors than those with lower personal resiliency. Self-reported risk behavior is surveyed by the "Adolescent Risk Behavior Inventory"…

  9. Is there room for resilience? A scoping review and critique of substance use literature and its utilization of the concept of resilience.

    Science.gov (United States)

    Rudzinski, Katherine; McDonough, Peggy; Gartner, Rosemary; Strike, Carol

    2017-09-15

    Research in the area of illicit substance use remains preoccupied with describing and analyzing the risks of people who use drugs (PWUD), however more recently there has been a drive to use a strengths-based or resilience approach as an alternative to investigating drug use. This leads us to ask: what can be known about PWUD from the point of view of resilience? The objective of this scoping review is to analyze how the concept of resilience is defined, operationalized, and applied in substance use research. Popular health, social science, psychology, and inter-disciplinary databases namely: SCOPUS, PUBMED, PsycINFO, and Sociological Abstracts were searched. Studies were selected if they used the concept of resilience and if substance use was a key variable under investigation. A total of 77 studies were identified which provided a definition of resilience, or attempted to operationalize (e.g., via scales) the concept of resilience in some manner. Data were charted and sorted using key terms and fundamental aspects of resilience. The majority of studies focus on youth and their resistance to, or engagement in, substance use. There is also a small but growing area of research that examines recovery from substance addiction as a form of resilience. Very few studies were found that thoroughly investigated resilience among PWUD. Consistently throughout the literature drug use is presented as a 'risk factor' jeopardizing one's ability to be resilient, or drug use is seen as a 'maladaptive coping strategy', purporting one's lack of resilience. Currently, substance use research provides a substantial amount of information about the internal strengths that can assist in resisting future drug use; however there is less information about the external resources that play a role, especially for adults. Though popular, outcome-based conceptualizations of resilience are often static, concealing the potential for developing resilience over time or as conditions change. Studies of

  10. Evaluating multicast resilience in carrier ethernet

    DEFF Research Database (Denmark)

    Ruepp, Sarah Renée; Wessing, Henrik; Zhang, Jiang

    2010-01-01

    This paper gives an overview of the Carrier Ethernet technology with specific focus on resilience. In particular, we show how multicast traffic, which is essential for IPTV can be protected. We detail the ackground for resilience mechanisms and their control and e present Carrier Ethernet...... resilience methods for linear nd ring networks. By simulation we show that the vailability of a multicast connection can be significantly increased by applying protection methods....

  11. Incorporating Resilience into Dynamic Social Models

    Science.gov (United States)

    2016-07-20

    form contains classified information, stamp classification level on the top and bottom of this page. 17. LIMITATION OF ABSTRACT. This block must be...resilience as a multi- level resilience and study their resilience at individual, family and society levels . However, having more than one level on a...4] U. Fischbacher, S. Gächter, and E. Fehr, “Are People Conditionally Cooperative ? Evidence from a Public Goods Experiment,” Econ . Lett., vol

  12. The politics of vulnerability and resilience

    Directory of Open Access Journals (Sweden)

    Georg Frerks

    2011-12-01

    Full Text Available Much conceptual confusion exists over the concepts of vulnerability and (social resilience, reinforced by the different paradigms (the article identifies four and disciplinary traditions underlying their use. While since the 1980s the social construction of "vulnerability" as a driver for disaster received considerable attention, in recent years we have seen increased attention to people's capacities and resilience. The currently popular "complexity" approach to risk moreover appears to offer ways of breaking through entrenched vulnerabilities. Resilience however is also a political project which, we argue, also has its dark, conservative overtones and overlooks structural sources of vulnerability that continue to affect hazard-prone actors. We may therefore need to conceive resilience as the potential for social transformation after disaster.Existe muita confusão conceitual em torno dos conceitos de vulnerabilidade e resiliência (social, reforçada pela diferença de paradigmas (este artigo identifica quarto e tradições disciplinares subjacentes à sua utilização. Enquanto desde os anos 80 a construção social de "vulnerabilidade" como condutor para desastres recebeu atenção considerável, nos últimos anos temos visto maior atenção às capacidades e resiliência das pessoas. Atualmente popular, a abordagem da "complexidade" do risco, além disso, parece oferecer maneiras transformadoras através das vulnerabilidades enraizadas. No entanto, defendemos que a resiliência é um projeto político que também tem seus sombrios sobretons conservadores e omite fontes estruturais de vulnerabilidade que continuam a afetar os atores propensos ao risco. Podemos, portanto, precisar conceber a resiliência como potencial para transformação social depois de desastres.

  13. Multiphase composites with extremal bulk modulus

    DEFF Research Database (Denmark)

    Gibiansky, L. V.; Sigmund, Ole

    2000-01-01

    are described. Most of our new results are related to the two-dimensional problem. A numerical topology optimization procedure that solves the inverse homogenization problem is adopted and used to look for two-dimensional three-phase composites with a maximal effective bulk modulus. For the combination...... isotropic three-dimensional three-phase composites with cylindrical inclusions of arbitrary cross-sections (plane strain problem) or transversely isotropic thin plates (plane stress or bending of plates problems). (C) 2000 Elsevier Science Ltd. All rights reserved....

  14. Toward quantifying metrics for rail-system resilience : Identification and analysis of performance weak resilience signals

    NARCIS (Netherlands)

    Regt, A. de; Siegel, A.W.; Schraagen, J.M.C.

    2016-01-01

    This paper aims to enhance tangibility of the resilience engineering concept by facilitating understanding and operationalization of weak resilience signals (WRSs) in the rail sector. Within complex socio-technical systems, accidents can be seen as unwanted outcomes emerging from uncontrolled

  15. Does resilient mean eco-inefficient?

    DEFF Research Database (Denmark)

    Pizzol, Massimo

    as long-term perfomance. Resilience is not explicitly taken into account within life cycle assessment (LCA). LCA determines the eco-efficiency of product systems, i.e. the ratio between the function provided by the product and its impact on the environment. The question is whether a product system which...... structure is improved or designed to be more resilient will not only be more inefficient, but also eco-inefficient, when studied by means of LCA. In this work a two steps approach is proposed to study resilience of product systems: 1) assessment of disturbance conditions and their inclusion within the scope......, because the redundant connections between elements of a system make it less efficient but also more flexible and adaptable and allow to perform a function even if some connections are interrupted or missing. Balancing between resilience and efficiency seems to be the key for sustainability intended...

  16. Literature Review of Concepts: Psychological Resiliency

    National Research Council Canada - National Science Library

    Wald, Jaye; Taylor, Steven; Asmundson, Gordon J; Jang, Kerry L; Stapleton, Jennifer

    2006-01-01

    ...; and resiliency measures, their development and validation. Existing definitions implicate resiliency with the ability to adapt and successfully cope with adversity, life stressors, and traumatic events...

  17. E-modulus evolution and its relation to solids formation of pastes from commercial cements

    DEFF Research Database (Denmark)

    Maia, Lino; Azenha, Miguel; Geiker, Mette

    2012-01-01

    Models for early age E-modulus evolution of cement pastes are available in the literature, but their validation is limited. This paper provides correlated measurements of early age evolution of E-modulus and hydration of pastes from five commercial cements differing in limestone content. A recently...

  18. Synthesis of Trigeneration Systems: Sensitivity Analyses and Resilience

    Directory of Open Access Journals (Sweden)

    Monica Carvalho

    2013-01-01

    Full Text Available This paper presents sensitivity and resilience analyses for a trigeneration system designed for a hospital. The following information is utilized to formulate an integer linear programming model: (1 energy service demands of the hospital, (2 technical and economical characteristics of the potential technologies for installation, (3 prices of the available utilities interchanged, and (4 financial parameters of the project. The solution of the model, minimizing the annual total cost, provides the optimal configuration of the system (technologies installed and number of pieces of equipment and the optimal operation mode (operational load of equipment, interchange of utilities with the environment, convenience of wasting cogenerated heat, etc. at each temporal interval defining the demand. The broad range of technical, economic, and institutional uncertainties throughout the life cycle of energy supply systems for buildings makes it necessary to delve more deeply into the fundamental properties of resilient systems: feasibility, flexibility and robustness. The resilience of the obtained solution is tested by varying, within reasonable limits, selected parameters: energy demand, amortization and maintenance factor, natural gas price, self-consumption of electricity, and time-of-delivery feed-in tariffs.

  19. Standardizing lightweight deflectometer modulus measurements for compaction quality assurance

    Science.gov (United States)

    2017-09-01

    To evaluate the compaction of unbound geomaterials under unsaturated conditions and replace the conventional methods with a practical modulus-based specification using LWD, this study examined three different LWDs, the Zorn ZFG 3000 LWD, Dynatest 303...

  20. Measures of emergency preparedness contributing to nursing home resilience.

    Science.gov (United States)

    Lane, Sandi J; McGrady, Elizabeth

    2017-12-13

    Resilience approaches have been successfully applied in crisis management, disaster response, and high reliability organizations and have the potential to enhance existing systems of nursing home disaster preparedness. This study's purpose was to determine how the Center for Medicare and Medicaid Services (CMS) "Emergency Preparedness Checklist Recommended Tool for Effective Health Care Facility Planning" contributes to organizational resilience by identifying the benchmark resilience items addressed by the CMS Emergency Preparedness Checklist and items not addressed by the CMS Emergency Preparedness Checklist, and to recommend tools and processes to improve resilience for nursing homes. The CMS Emergency Preparedness Checklist items were compared to the Resilience Benchmark Tool items; similar items were considered matches. Resilience Benchmark Tool items with no CMS Emergency Preparedness Checklist item matches were considered breaches in nursing home resilience. The findings suggest that the CMS Emergency Preparedness Checklist can be used to measure some aspects of resilience, however, there were many resilience factors not addressed. For nursing homes to prepare and respond to crisis situations, organizations need to embrace a culture that promotes individual resilience-related competencies that when aggregated enable the organization to improve its resiliency. Social workers have the skills and experience to facilitate this change.

  1. Nurse leader resilience: career defining moments.

    Science.gov (United States)

    Cline, Susan

    2015-01-01

    Resilience is an essential component of effective nursing leadership. It is defined as the ability to survive and thrive in the face of adversity. Resilience can be developed and internalized as a measure to improve retention and reduce burnout. Nurse leaders at all levels should develop these competencies to survive and thrive in an increasingly complex health care environment. Building positive relationships, maintaining positivity, developing emotional insight, creating work-life balance, and reflecting on successes and challenges are effective strategies for resilience building. Nurse leaders have a professional obligation to develop resilience in themselves, the teams they supervise, and the organization as a whole. Additional benefits include reduced turnover, reduced cost, and improved quality outcomes through organizational mindfulness.

  2. Special issue on Resilience and (in)security

    DEFF Research Database (Denmark)

    Kristensen, Kristian Søby

    , and redefine relations of security and insecurity. We show the increased attention – scholarly as well as political – given to resilience in recent times and provide a review of the state of critical security studies literature on resilience. We argue that to advance this discussion, resilience needs...

  3. The effect of gamma ray irradiation on PAN-based intermediate modulus carbon fibers

    International Nuclear Information System (INIS)

    Li, Bin; Feng, Yi; Qian, Gang; Zhang, Jingcheng; Zhuang, Zhong; Wang, Xianping

    2013-01-01

    Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM) were conducted on PAN-based intermediate modulus carbon fibers to investigate the structure and surface hydrophilicity of the carbon fibers before and after gamma irradiation. Two methods were used to determine Young’s modulus of the carbon fibers. The results show that gamma ray irradiation improved the degree of graphitization and introduced compressive stress into carbon fiber surface. Gamma ray also improved the carbon fiber surface hydrophilicity through increasing the value of O/C and enhancing the quantity of oxygen functional groups on carbon fibers. No distinct morphology change was observed after gamma ray irradiation. The Young’s modulus of the fibers increased with increasing irradiation dose

  4. Resilient children of injection drug users.

    Science.gov (United States)

    Pilowsky, Daniel J; Zybert, Patricia A; Vlahov, David

    2004-11-01

    To examine associations between resilience in children of injection drug users and children's coping strategies, parenting stress, and children's social support. Injection drug-using parents (n=91) and their children aged 6 to 11 (n=117) were recruited in Baltimore (1997-1999). Resilience was defined as scoring in the lowest quartile of the Child Behavior Checklist total psychopathology score. Coping strategies used by resilient and nonresilient children, the extent and types of social support that they received, and the level of parenting stress reported by their parents were compared and contrasted. Rates of depressive, anxiety, and disruptive behavior disorders were 15.4%, 22.2%, and 21.4%, respectively, for the entire sample. Compared with the nonresilient, resilient children were less likely to use two avoidance coping strategies (internalizing [p=.002] and externalizing [p=.017]). The level of actual support received by resilient and nonresilient children did not differ significantly (p=.202). Perceived support was greater among resilient children (as reported by their parents; p parents reported lower parenting stress (p=.042). A significant proportion of children of injection drug users are in need of clinical care. Interventions to help children of substance-abusing parents modify their coping style merit exploration.

  5. Why resilience is unappealing to social science: Theoretical and empirical investigations of the scientific use of resilience

    Science.gov (United States)

    Olsson, Lennart; Jerneck, Anne; Thoren, Henrik; Persson, Johannes; O’Byrne, David

    2015-01-01

    Resilience is often promoted as a boundary concept to integrate the social and natural dimensions of sustainability. However, it is a troubled dialogue from which social scientists may feel detached. To explain this, we first scrutinize the meanings, attributes, and uses of resilience in ecology and elsewhere to construct a typology of definitions. Second, we analyze core concepts and principles in resilience theory that cause disciplinary tensions between the social and natural sciences (system ontology, system boundary, equilibria and thresholds, feedback mechanisms, self-organization, and function). Third, we provide empirical evidence of the asymmetry in the use of resilience theory in ecology and environmental sciences compared to five relevant social science disciplines. Fourth, we contrast the unification ambition in resilience theory with methodological pluralism. Throughout, we develop the argument that incommensurability and unification constrain the interdisciplinary dialogue, whereas pluralism drawing on core social scientific concepts would better facilitate integrated sustainability research. PMID:26601176

  6. A methodological approach to studying resilience mechanisms: demonstration of utility in age and Alzheimer's disease-related brain pathology.

    Science.gov (United States)

    Wolf, Dominik; Fischer, Florian Udo; Fellgiebel, Andreas

    2018-05-01

    The present work aims at providing a methodological approach for the investigation of resilience factors and mechanisms in normal aging, Alzheimer's disease (AD) and other neurodegenerative disorders. By expanding and re-conceptualizing traditional regression approaches, we propose an approach that not only aims at identifying potential resilience factors but also allows for a differentiation between general and dynamic resilience factors in terms of their association with pathology. Dynamic resilience factors are characterized by an increasing relevance with increasing levels of pathology, while the relevance of general resilience factors is independent of the amount of pathology. Utility of the approach is demonstrated in age and AD-related brain pathology by investigating widely accepted resilience factors, including education and brain volume. Moreover, the approach is used to test hippocampal volume as potential resilience factor. Education and brain volume could be identified as general resilience factors against age and AD-related pathology. Beyond that, analyses highlighted that hippocampal volume may not only be disease target but also serve as a potential resilience factor in age and AD-related pathology, particularly at higher levels of tau-pathology (i.e. dynamic resilience factor). Given its unspecific and superordinate nature the approach is suitable for the investigation of a wide range of potential resilience factors in normal aging, AD and other neurodegenerative disorders. Consequently, it may find a wide application and thereby promote the comparability between studies.

  7. Estimate of K-functionals and modulus of smoothness constructed ...

    Indian Academy of Sciences (India)

    2016-08-26

    functional and a modulus of smoothness for the Dunkl transform on Rd. Author Affiliations. M El Hamma1 R Daher1. Department of Mathematics, Faculty of Sciences Aïn Chock, University of Hassan II, Casablanca, Morocco. Dates.

  8. Teaching Resiliency Theory to Substance Abuse Counselors

    Science.gov (United States)

    Ward, Kelly

    2003-01-01

    Resiliency is the ability to cope in the face of adversity. One protective factor that promotes resiliency in substance-abusing dysfunctional families is family rituals and traditions. Social workers and substance abuse counselors can teach family members how to instill resiliency in their families and themselves through rituals and traditions. To…

  9. Resilience and Complexity

    DEFF Research Database (Denmark)

    Dahlberg, Rasmus

    2015-01-01

    This paper explores two key concepts: resilience and complexity. The first is understood as an emergent property of the latter, and their inter-relatedness is discussed using a three tier approach. First, by exploring the discourse of each concept, next, by analyzing underlying relationships and...... robust. Robustness is a property of simple or complicated systems characterized by predictable behavior, enabling the system to bounce back to its normal state following a perturbation. Resilience, however, is an emergent property of complex adaptive systems. It is suggested that this distinction...

  10. Multi-Sited Resilience

    DEFF Research Database (Denmark)

    Olwig, Mette Fog

    2012-01-01

    with natural disasters and climate change. In a globalized world, however, it is hard to discern what is “local” as global organizations play an increasingly visible and powerful role. This paper will argue that local understandings and practices of resilience cannot be disentangled from global understandings...... flooding in northern Ghana, this paper examines the mutual construction of “local” and “global” notions and practices of resilience through multi-sited processes. It is based on interviews and participant observation in multiple sites at the “local,” “regional” and “global” levels....

  11. SUPPLY CHAIN RESILIENCE ANALYSIS: A BRAZILIAN AUTOMOTIVE CASE

    Directory of Open Access Journals (Sweden)

    Luiz Felipe Scavarda

    2015-04-01

    Full Text Available Supply chain (SC resilience and flexibility are important research topics receiving growing attention. However, the academic literature needs empirical studies on SC resilience capable of investigating the inter-organizational components of flexibility along different tiers. Therefore, this paper analyzes the main lack of flexibilities in three Brazilian automotive SCs that limit their resilience and therefore their capacity to better support and meet the demand changes in the marketplace. A multi-tier case study approach is adopted. Research findings identify lack of flexibilities in different tiers that inhibit the SC resilience as well as manufacturing and SC flexibilities that build SC resilience. The findings also highlight that the same SC may have the flexibility to be resilient for one of its products but not for another product, what sheds new lights on the academic literature. Finally, flexible SCs should be designed to increase SC resilience to cope with mishaps as significant demand changes.

  12. Development of resilience evaluation method for nuclear power plants. Part 3. Study of evaluation method and applicability of resilience index

    International Nuclear Information System (INIS)

    Suzuki, Masaaki; Demachi, Kazuyuki; Miyano, Hiroshi

    2017-01-01

    We have developed a new index, called the resilience index, that evaluates the dynamic stability of the system safety of a nuclear power plant during a severe accident by considering the ability to recover system safety functions that have become lost in the situation. In this paper, a detailed evaluation procedure for the resilience index is described. The system safety of a pressurized water reactor plant during a severe accident is then assessed according to the resilience index in order to discuss the applicability of the index. We find that the resilience index successfully represents management capability and, therefore, the resilience capability of a nuclear power plant. (author)

  13. Development of resilience evaluation method for nuclear power plants. Part 3. Study on evaluation method and applicability of resilience index

    International Nuclear Information System (INIS)

    Suzuki, Masaaki; Demachi, Kazuyuki; Murakami, Kenta

    2016-01-01

    We have developed a new index, called the resilience index, that evaluates the dynamic stability of the system safety of a nuclear power plant during a severe accident by considering the ability to recover system safety functions that have become lost in the situation. In this paper, a detailed evaluation procedure for the resilience index is described. The system safety of a PWR plant during a severe accident is then assessed according to the resilience index in order to discuss the applicability of the index. We find that the resilience index successfully represents management capability and, therefore, the resilience capability of a nuclear power plant. (author)

  14. A resilience approach can improve anadromous fish restoration

    Science.gov (United States)

    Waldman, John R.; Wilson, Karen A.; Mather, Martha E.; Snyder, Noah P.

    2016-01-01

    Most anadromous fish populations remain at low levels or are in decline despite substantial investments in restoration. We explore whether a resilience perspective (i.e., a different paradigm for understanding populations, communities, and ecosystems) is a viable alternative framework for anadromous fish restoration. Many life history traits have allowed anadromous fish to thrive in unimpacted ecosystems but have become contemporary curses as anthropogenic effects increase. This contradiction creates a significant conservation challenge but also makes these fish excellent candidates for a resilience approach. A resilience approach recognizes the need to maintain life history, population, and habitat characteristics that increase the ability of a population to withstand and recover from multiple disturbances. To evaluate whether a resilience approach represents a viable strategy for anadromous fish restoration, we review four issues: (1) how resilience theory can inform anadromous fish restoration, (2) how a resilience-based approach is fundamentally different than extant anadromous fish restoration strategies, (3) ecological characteristics that historically benefited anadromous fish persistence, and (4) examples of how human impacts harm anadromous fish and how a resilience approach might produce more successful outcomes. We close by suggesting new research and restoration directions for implementation of a resilience-based approach.

  15. [Resilience: an interdisciplinary approach to concept and findings].

    Science.gov (United States)

    Korn, Lena

    2012-01-01

    First, the concept of the term "resilience" is introduced and summarized as an adaptive, dynamic "buffering process" of children's mental power of resistance against biological, psychological and psychosocial development risks. Subsequently, based on a critical discussion of the current research findings, protective factors are presented, which is followed by an approach to the concept of resilience from interdisciplinary perspectives. The latest findings from developmental neurobiology show that genetic as well as environmental factors have their important share in the development of resilience. This builds a bridge to the consideration of resilience with regard to attachment theory. Accordingly secure attachment could be seen as a condition for a resilient conduct of life. In this context, the concept of "earned security" is additionally taken into account. Furthermore, the relevance of resilience for the field of pedagogics is shortly and critically considered. With reference to a psychoanalytic approach to the concept of resilience self-regulation, internal integrity, mentalization and self-reflection are elaborated on, as well as the similarity to the psychoanalytic concept of ego strength. In conclusion, a critical discussion of the concept of resilience and its benefits as well as potential risks related to it is presented.

  16. Resilia cyber resilience best practices

    CERN Document Server

    , AXELOS

    2015-01-01

    RESILIA™ Cyber Resilience Best Practices offers a practical approach to cyber resilience, reflecting the need to detect and recover from incidents, and not rely on prevention alone. It uses the ITIL® framework, which provides a proven approach to the provision of services that align to business outcomes.

  17. Environmental Variability in the Florida Keys: Impacts on Coral Reef Resilience and Health

    Science.gov (United States)

    Soto, I. M.; Muller-Karger, F. E.

    2005-12-01

    Environmental variability contributes to both mass mortality and resilience in tropical coral reef communities. We assess variations in sea surface temperature (SST) and ocean color in the Florida Keys using satellite imagery, and provide insight into how this variability is associated with locations of resilient coral communities (those unaffected by or able to recover from major events). The project tests the hypothesis that areas with historically low environmental variability promote lower levels of coral reef resilience. Time series of SST from the Advanced Very High Resolution Radiometer (AVHRR) sensors and ocean color derived quantities (e.g., turbidity and chlorophyll) from the Sea-viewing Wide Field of View Sensor (SeaWiFS) are being constructed over the entire Florida Keys region for a period of twelve and nine years, respectively. These data will be compared with historical coral cover data derived from Landsat imagery (1984-2002). Improved understanding of the causes of coral reef decline or resilience will help protect and manage these natural treasures.

  18. A Methodology to Define Flood Resilience

    Science.gov (United States)

    Tourbier, J.

    2012-04-01

    Flood resilience has become an internationally used term with an ever-increasing number of entries on the Internet. The SMARTeST Project is looking at approaches to flood resilience through case studies at cities in various countries, including Washington D.C. in the United States. In light of U.S. experiences a methodology is being proposed by the author that is intended to meet ecologic, spatial, structural, social, disaster relief and flood risk aspects. It concludes that: "Flood resilience combines (1) spatial, (2) structural, (3) social, and (4) risk management levels of flood preparedness." Flood resilience should incorporate all four levels, but not necessarily with equal emphasis. Stakeholders can assign priorities within different flood resilience levels and the considerations they contain, dividing 100% emphasis into four levels. This evaluation would be applied to planned and completed projects, considering existing conditions, goals and concepts. We have long known that the "road to market" for the implementation of flood resilience is linked to capacity building of stakeholders. It is a multidisciplinary enterprise, involving the integration of all the above aspects into the decision-making process. Traditional flood management has largely been influenced by what in the UK has been called "Silo Thinking", involving constituent organizations that are responsible for different elements, and are interested only in their defined part of the system. This barrier to innovation also has been called the "entrapment effect". Flood resilience is being defined as (1) SPATIAL FLOOD RESILIENCE implying the management of land by floodplain zoning, urban greening and management to reduce storm runoff through depression storage and by practicing Sustainable Urban Drainage (SUD's), Best Management Practices (BMP's, or Low Impact Development (LID). Ecologic processes and cultural elements are included. (2) STRUCTURAL FLOOD RESILIENCE referring to permanent flood defense

  19. Reliable measurement of elastic modulus of cells by nanoindentation in an atomic force microscope

    KAUST Repository

    Zhou, Zhoulong; Ngan, Alfonso H W; Tang, Bin; Wang, Anxun

    2012-01-01

    The elastic modulus of an oral cancer cell line UM1 is investigated by nanoindentation in an atomic force microscope with a flat-ended tip. The commonly used Hertzian method gives apparent elastic modulus which increases with the loading rate, indicating strong effects of viscoelasticity. On the contrary, a rate-jump method developed for viscoelastic materials gives elastic modulus values which are independent of the rate-jump magnitude. The results show that the rate-jump method can be used as a standard protocol for measuring elastic stiffness of living cells, since the measured values are intrinsic properties of the cells. © 2011 Elsevier Ltd.

  20. Reliable measurement of elastic modulus of cells by nanoindentation in an atomic force microscope

    KAUST Repository

    Zhou, Zhoulong

    2012-04-01

    The elastic modulus of an oral cancer cell line UM1 is investigated by nanoindentation in an atomic force microscope with a flat-ended tip. The commonly used Hertzian method gives apparent elastic modulus which increases with the loading rate, indicating strong effects of viscoelasticity. On the contrary, a rate-jump method developed for viscoelastic materials gives elastic modulus values which are independent of the rate-jump magnitude. The results show that the rate-jump method can be used as a standard protocol for measuring elastic stiffness of living cells, since the measured values are intrinsic properties of the cells. © 2011 Elsevier Ltd.

  1. Modulus stabilization in a non-flat warped braneworld scenario

    Energy Technology Data Exchange (ETDEWEB)

    Banerjee, Indrani [S.N. Bose National Centre for Basic Sciences, Department of Astrophysics and Cosmology, Kolkata (India); SenGupta, Soumitra [Indian Association for the Cultivation of Science, Department of Theoretical Physics, Kolkata (India)

    2017-05-15

    The stability of the modular field in a warped brane world scenario has been a subject of interest for a long time. Goldberger and Wise (GW) proposed a mechanism to achieve this by invoking a massive scalar field in the bulk space-time neglecting the back-reaction. In this work, we examine the possibility of stabilizing the modulus without bringing about any external scalar field. We show that instead of flat 3-branes as considered in Randall-Sundrum (RS) warped braneworld model, if one considers a more generalized version of warped geometry with de Sitter 3-brane, then the brane vacuum energy automatically leads to a modulus potential with a metastable minimum. Our result further reveals that in this scenario the gauge hierarchy problem can also be resolved for an appropriate choice of the brane's cosmological constant. (orig.)

  2. What we know and do not know about organizational resilience

    Directory of Open Access Journals (Sweden)

    Cristina Ruiz-Martin

    2018-01-01

    Full Text Available We present a literature review about organizational resilience, with the goal of identifying how organizational resilience is conceptualized and assessed. The two research questions that drive the review are: (1 how is organizational resilience conceptualized? and (2 how is organizational resilience assessed? We answer the first question by analysing organizational resilience definitions and the attributes or characteristics that contribute to develop resilient organizations. We answer the second question by reviewing articles that focus on tools or methods to measure organizational resilience. Although there are three different ways to define organizational resilience, we found common ideas in the definitions. We also found that organizational resilience is considered a property, ability or capability that can be improved over time. However, we did not find consensus about the elements that contribute to improving the level of organizational resilience and how to assess it. Based on the results of the review, we propose a conceptualization of organizational resilience that integrates the three views found in the literature. We also propose a four-level Maturity Model for Organizational Resilience – MMOR. Using this model, the organization can be in one of the following levels based on its ability and capacity to handle disruptive events: fragile, robust, resilient or antifragile.

  3. Clarifying Resilience in the Context of Homeland Security

    Science.gov (United States)

    2013-03-01

    Resilience Is a Complex Adaptive System of Systems ( CASoS ) ....60 4. Resilience Is Experienced and Demonstrated in Different Ways ..60 5. Resilience Is...The inclusion of a resilience module into existing homeland security training programs broadens the practitioner’s knowledge base from a basic level...psychology offer several considerations for the homeland security practitioner. The first consideration maintains that a de -emphasis on the

  4. From academic to applied: Operationalising resilience in river systems

    Science.gov (United States)

    Parsons, Melissa; Thoms, Martin C.

    2018-03-01

    The concept of resilience acknowledges the ability of societies to live and develop with dynamic environments. Given the recognition of the need to prepare for anticipated and unanticipated shocks, applications of resilience are increasing as the guiding principle of public policy and programs in areas such as disaster management, urban planning, natural resource management, and climate change adaptation. River science is an area in which the adoption of resilience is increasing, leading to the proposition that resilience may become a guiding principle of river policy and programs. Debate about the role of resilience in rivers is part of the scientific method, but disciplinary disunity about the ways to approach resilience application in policy and programs may leave river science out of the policy process. We propose six elements that need to be considered in the design and implementation of resilience-based river policy and programs: rivers as social-ecological systems; the science-policy interface; principles, capacities, and characteristics of resilience; cogeneration of knowledge; adaptive management; and the state of the science of resilience.

  5. Can Law Foster Social-Ecological Resilience?

    Directory of Open Access Journals (Sweden)

    Ahjond S. Garmestani

    2013-06-01

    Full Text Available Law plays an essential role in shaping natural resource and environmental policy, but unfortunately, many environmental laws were developed around the prevailing scientific understanding that there was a "balance of nature" that could be managed and sustained. This view assumes that natural resource managers have the capacity to predict the behavior of ecological systems, know what its important functional components are, and successfully predict the outcome of management interventions. This paper takes on this problem by summarizing and synthesizing the contributions to this Special Feature (Law and Social-Ecological Resilience, Part I: Contributions from Resilience 2011, focusing on the interaction of law and social-ecological resilience, and then offering recommendations for the integration of law and social-ecological resilience.

  6. When Violence Can Appear With Different Male Partners: Identification of Resilient and Non-resilient Women in the European Union

    Directory of Open Access Journals (Sweden)

    Juan Herrero

    2018-06-01

    Full Text Available Introduction: Little scholarly attention has been paid to the analysis of the history of intimate partner violence (IPV against women with different male partners and how it could be related to levels of IPV with the current male partner. From this point of view, been a victim of IPV could increase the vulnerability of women and, therefore, exert a negative influence on the selection of partners over time, thus increasing the odds of potentially mating with abusive male partners. Alternatively, for some women victims of IPV in previous relationships, there may be additional resources that reduce their vulnerability to victimization by new partners.Methodology: The present study analyzes levels of IPV in different partners of 2376 heterosexual women from the 28 countries of the European Union living together as a couple who had previously lived with a different male partner.Analysis/Discussion: Multilevel regression results indicated that resilient women were younger, more satisfied with household income, and were involved in shorter relationships. As for their previous levels of victimization, they scored lower on child abuse and non-partner adult victimization. Also, their levels of victimization from previous partners were the same as those of the non-resilient women, with the exception of physical IPV victimization where resilient women scored higher than non-resilient women. Resilient women also informed the interviewer to have ended the abusive relationship because of the violence to a greater extent than non-resilient women and seemed to suffer fewer psychological difficulties due to previous violent relationships. Finally, countries scoring higher on human development index (HDI showed a larger proportion of resilient women.Conclusion: Resilient women are mostly characterized by fewer psychological difficulties and lower frequency of adverse situations (in childhood or in adulthood when compared to non-resilient women. Although resilient

  7. Connecting Jacobi elliptic functions with different modulus parameters

    Indian Academy of Sciences (India)

    found in the literature do not involve any change in the modulus parameter m. For ... Here, the right-hand side contains the sum of two terms with arguments separated ...... able thing is that, it is precisely these sums for which Landen formulas, mentioned above ... ematical sciences (Springer-Verlag, New York, 1989) vol. 80.

  8. Inferring the relative resilience of alternative states

    Science.gov (United States)

    Angeler, David G.; Allen, Craig R.; Rojo, Carmen; Alvarez-Cobelas, Miguel; Rodrigo, Maria A.; Sanchez-Carrillo, Salvador

    2013-01-01

    Ecological systems may occur in alternative states that differ in ecological structures, functions and processes. Resilience is the measure of disturbance an ecological system can absorb before changing states. However, how the intrinsic structures and processes of systems that characterize their states affects their resilience remains unclear. We analyzed time series of phytoplankton communities at three sites in a floodplain in central Spain to assess the dominant frequencies or “temporal scales” in community dynamics and compared the patterns between a wet and a dry alternative state. The identified frequencies and cross-scale structures are expected to arise from positive feedbacks that are thought to reinforce processes in alternative states of ecological systems and regulate emergent phenomena such as resilience. Our analyses show a higher species richness and diversity but lower evenness in the dry state. Time series modeling revealed a decrease in the importance of short-term variability in the communities, suggesting that community dynamics slowed down in the dry relative to the wet state. The number of temporal scales at which community dynamics manifested, and the explanatory power of time series models, was lower in the dry state. The higher diversity, reduced number of temporal scales and the lower explanatory power of time series models suggest that species dynamics tended to be more stochastic in the dry state. From a resilience perspective our results highlight a paradox: increasing species richness may not necessarily enhance resilience. The loss of cross-scale structure (i.e. the lower number of temporal scales) in community dynamics across sites suggests that resilience erodes during drought. Phytoplankton communities in the dry state are therefore likely less resilient than in the wet state. Our case study demonstrates the potential of time series modeling to assess attributes that mediate resilience. The approach is useful for assessing

  9. Mental resilience, perceived immune functioning, and health

    Directory of Open Access Journals (Sweden)

    Van Schrojenstein Lantman M

    2017-03-01

    Full Text Available Marith Van Schrojenstein Lantman,1 Marlou Mackus,1 Leila S Otten,1 Deborah de Kruijff,1 Aurora JAE van de Loo,1,2 Aletta D Kraneveld,1,2 Johan Garssen,1,3 Joris C Verster1,2,4 1Division of Pharmacology, Utrecht University, Utrecht, the Netherlands; 2Institute for Risk Assessment Sciences, Utrecht University, Utrecht, the Netherlands; 3Nutricia Research, Utrecht, the Netherlands; 4Centre for Human Psychopharmacology, Swinburne University, Melbourne, Australia Background: Mental resilience can be seen as a trait that enables an individual to recover from stress and to face the next stressor with optimism. People with resilient traits are considered to have a better mental and physical health. However, there are limited data available assessing the relationship between resilient individuals and their perspective of their health and immune status. Therefore, this study was conducted to examine the relationship between mental resilience, perceived health, and perceived immune status. Methods: A total of 779 participants recruited at Utrecht University completed a questionnaire consisting of demographic characteristics, the brief resilience scale for the assessment of mental resilience, the immune function questionnaire (IFQ, and questions regarding their perceived health and immune status. Results: When correcting for gender, age, height, weight, smoker status, amount of cigarettes smoked per week, alcohol consumption status, amount of drinks consumed per week, drug use, and frequency of past year drug use, mental resilience was significantly correlated with perceived health (r=0.233, p=0.0001, perceived immune functioning (r=0.124, p=0.002, and IFQ score (r=−0.185, p=0.0001. Conclusion: A significant, albeit modest, relationship was found between mental resilience and perceived immune functioning and health. Keywords: mental resilience, immune functioning, health, vitality, quality of life

  10. The International Resilience Research Project.

    Science.gov (United States)

    Grotberg, Edith H.

    Resilience is defined as "the human capacity to face, overcome, and be strengthened by experiences of adversity." This study used an Eriksonian developmental model to examine parents', caregivers', and children's resilience-promotion in children up to 12 years of age. Age and gender differences and cultural/ethnic similarities and…

  11. Defining resilience: A preliminary integrative literature review

    Science.gov (United States)

    Wilt, Bonnie; Long, Suzanna K.; Shoberg, Thomas G.

    2016-01-01

    The term “resilience” is ubiquitous in technical literature; it appears in numerous forms, such as resilience, resiliency, or resilient, and each use may have a different definition depending on the interpretation of the writer. This creates difficulties in understanding what is meant by ‘resilience’ in any given use case, especially in discussions of interdisciplinary research. To better understand this problem, this research constructs a preliminary integrative literature review to map different definitions, applications and calculation methods of resilience invoked within critical infrastructure applications. The preliminary review uses a State-of-the-Art Matrix (SAM) analysis to characterize differences in definition across disciplines and between regions. Qualifying the various usages of resilience will produce a greater precision in the literature and a deeper insight into types of data required for its evaluation, particularly with respect to critical infrastructure calculations and how such data may be analyzed. Results from this SAM analysis will create a framework of key concepts as part of the most common applications for “resilient critical infrastructure” modeling.

  12. Building Psychological Health: The Services’ Perspectives on Resilience

    Science.gov (United States)

    2011-01-24

    program; medical supported • Doctrine signed Dec 2010 • Training: > 200,000 trained to date • 8 courses on Navy eLearning • Formal curriculum delivered...Address future concerns and build psychological resiliency 10 Reserve Resilience Initiatives 2011 MHS Conference NSW Resilience Enterprise  Resilience

  13. Ulysses' Return: Resilient Male Leaders Still at the Helm

    Science.gov (United States)

    McClellan, Rhonda; Christman, Dana; Fairbanks, Anthony

    2008-01-01

    This study examined resilient men in higher education administration, educational leadership programs to determine how they identified components of their resiliency, how they described events that demonstrated their resiliency, and how they prescribed ways in which preparation programs can foster resiliency in students. Using masculinity…

  14. Personal resilience and coping Part II: Identifying resilience and coping among U.S. military service members and veterans with implications for work.

    Science.gov (United States)

    Rice, Valerie; Liu, Baoxia

    2016-05-27

    U.S. military personnel face challenging situations including frequent deployments, family separations, and exposure to war. Identifying coping strategies used by the most resilient service members and veterans could positively influence military resiliency training programs. The purposes of this paper are to investigate the relationship between coping and resilience among U.S. military active service members and veterans, to identify the coping strategies used by those considered most resilient, and to discuss coping and resilience as they relate to the workplace. U.S. military active service members and veterans (N = 191) completed a demographic survey and two self-report questionnaires: The 14-Item Resilience Scale [1] and the Brief COPE [2]. Active duty service members had higher resilience scores than veterans (p  0.05). Active service members' resilience was predicted by their use of positive reframing and less use of self-blame as coping strategies, accounting for 52.3% of the variance (R2 = 0.523, F(2, 60) = 32.92, p = 0.000). Veterans' resilience was predicted by longer time-in-service, greater use of humor, and less use of self-blame as coping strategies, explaining 44.8% of the variance (R2 = 0.448, F(3, 116) = 31.408, p = 0.000). This research identifies the positive coping strategies, and least-used negative coping strategies, of the U.S. service members and veterans in our study population with higher resilience scores. Incorporating this information into military- or veteran-based resilience training is likely to increase training effectiveness.

  15. The influence of personal characteristics on the resilience of operating room nurses: a predictor study.

    Science.gov (United States)

    Gillespie, Brigid M; Chaboyer, Wendy; Wallis, Marianne

    2009-07-01

    Resilience in the workplace has been described as a means of facilitating adaptation in stressful environments, and therefore has application in nursing contexts. However, little research has examined how personal characteristics such as age, nursing experience and education contribute to resilience in clinical environments such as the operating room (OR). First to identify the level of resilience, and second, investigate whether age, experience and education contribute to resilience in an Australian sample of OR nurses. A predictive survey design was used. A random sample of 1430 nurses who were members of the Australian College of Operating Room Nurses association were surveyed. The survey included the 25-item Connor-Davidson Resilience Scale, and demographic questions. A standard regression model tested the hypothesis that age, years of OR experience and education contributed to resilience in OR nurses. A total of 735 (51.4%) completed, usable surveys were returned. Pearson's correlations demonstrated modest but statistically significant associations between age (presilience. In the multiple regression model, only years of OR experience predicted resilience (presilience. In OR nurses, resilience appears to be predicted by other attributes and is not necessarily dependent on an individual's personal characteristics. Thus, recruitment to the OR should not be based on the conventional notion that an older nursing workforce will have greater longevity and hence be more stable. If younger, less experienced nurses are adequately supported, they may thrive in the OR environment.

  16. Water Infrastructure and Resiliency Finance Center

    Science.gov (United States)

    The Water Infrastructure and Resiliency Finance Center serves as a resource to communities to improve their wastewater, drinking water and stormwater systems, particularly through innovative financing and increased resiliency to climate change.

  17. Resilience of family caregivers of elderly with Alzheimer

    OpenAIRE

    Carlene Souza Silva Manzini; Francisco Assis Carvalho Vale

    2016-01-01

    Resilience is the capacity that people have to cope positively with adversities. A cross-sectional, quantitative study, that aimed to assess factors associated with the resilience of family caregivers of elderly with Alzheimer’s disease. Sixty-six caregivers composed the sample, who were accompanied in a neurology ambulatory. Most caregivers presented moderate resilience. Linear regression showed that some factors interfered with caregivers’ resilience, being those: overload, the increment of...

  18. Conceptualizing and Operationalizing Social Resilience within Commercial Fisheries in Northern Australia

    Directory of Open Access Journals (Sweden)

    Nadine A. Marshall

    2007-06-01

    Full Text Available How can we tell whether resource-dependent people are socially resilient to institutional change? This question is becoming increasingly important as demand for natural resources escalates, requiring resource managers to implement policies that are increasingly restrictive on resource users. Yet policy changes are frequently made without a good understanding of the likely social and economic consequences. Knowledge of the resilience of resource users to changes in resource-use policies can assist in the design and implementation of policies that minimize the impacts on people while maximizing the sustainability of ecosystem goods and services. Despite the appeal of resilience as a framework for sustaining human-environment relations, there has been a distinct lack of explicit application of the concept by natural-resource managers. In response, we build on general resilience theory to develop a conceptual model of social resilience for resource-dependent users. We test and refine the operational virtues of the model using the commercial fishing industry in North Queensland. Detailed surveys of individual resource users provide data on historic response, expected well-being, and capacity as a basis for assessing resilience. We find that the response of fishers to generic yet anticipated change events is determined by four key characteristics: (1 perception of risk associated with change; (2 perception of the ability to plan, learn, and reorganize; (3 perception of the ability to cope; and (4 level of interest in change. These responses represent relative measures of the likely response of resource users to prospective changes in resource policy that affect the way in which the resource is used or accessed.

  19. Sensitive determination of the Young's modulus of thin films by polymeric microcantilevers

    DEFF Research Database (Denmark)

    Colombi, Paolo; Bergese, Paolo; Bontempi, Elza

    2013-01-01

    A method for the highly sensitive determination of the Young's modulus of TiO2 thin films exploiting the resonant frequency shift of a SU-8 polymer microcantilever (MC) is presented. Amorphous TiO2 films with different thickness ranging from 10 to 125 nm were grown at low temperature (90 °C......) with subnanometer thickness resolution on SU-8 MC arrays by means of atomic layer deposition. The resonant frequencies of the MCs were measured before and after coating and the elastic moduli of the films were determined by a theoretical model developed for this purpose. The Young's modulus of thicker TiO2 films...... (>75 nm) was estimated to be about 110 GPa, this value being consistent with the value of amorphous TiO2. On the other hand we observed a marked decrease of the Young's modulus for TiO2 films with a thickness below 50 nm. This behavior was found not to be related to a decrease of the film mass density...

  20. Increasing Accuracy of Tissue Shear Modulus Reconstruction Using Ultrasonic Strain Tensor Measurement

    Science.gov (United States)

    Sumi, C.

    Previously, we developed three displacement vector measurement methods, i.e., the multidimensional cross-spectrum phase gradient method (MCSPGM), the multidimensional autocorrelation method (MAM), and the multidimensional Doppler method (MDM). To increase the accuracies and stabilities of lateral and elevational displacement measurements, we also developed spatially variant, displacement component-dependent regularization. In particular, the regularization of only the lateral/elevational displacements is advantageous for the lateral unmodulated case. The demonstrated measurements of the displacement vector distributions in experiments using an inhomogeneous shear modulus agar phantom confirm that displacement-component-dependent regularization enables more stable shear modulus reconstruction. In this report, we also review our developed lateral modulation methods that use Parabolic functions, Hanning windows, and Gaussian functions in the apodization function and the optimized apodization function that realizes the designed point spread function (PSF). The modulations significantly increase the accuracy of the strain tensor measurement and shear modulus reconstruction (demonstrated using an agar phantom).

  1. Objectification of Modulus Elasticity of Foam Concrete Poroflow 17-5 on the Subbase Layer

    Directory of Open Access Journals (Sweden)

    Hájek Matej

    2016-05-01

    Full Text Available Principles of sustainable development create the need to develop new building materials. Foam concrete is a type of lightweight concrete that has many advantages compared to conventional building materials, for example low density and thermal insulation characteristics. With current development level, any negatively influencing material features are constantly eliminated as well. This paper is dealing with substitution of hydraulically bound mixtures by cement foam concrete Poroflow 17-5. The executed assessment is according to the methodology of assessing the existing asphalt pavements in Slovak Republic. The ex post calculation was used to estimate modulus range for Poroflow 17-5 based on the results of static load tests conducted using the Testing Experiment Equipment.

  2. Durability of base courses with mineral-cement-emulsion mixes (MCEM)

    Science.gov (United States)

    Kukiełka, J.; Sybilski, D.

    2018-05-01

    Base courses with mineral-cement-emulsion mixes (MCEM) have been the subject of research, surveys and development of e.g. new requirements included in the Guidelines of 2014 [15]. In this paper the results of sample test and survey of road sections, assessment of transverse cracks and load-bearing capacity with FWD after 13 years of exploitation are presented. On the MCEM samples the following tests were carried out: resilient modulus using NAT, complex stiffness modulus (E*), phase shift angle at various temperatures and loading frequencies thereby obtaining master curves, fatigue life and low-temperature resistance by identifying the tensile stress restrained (TSRST) which allowed for general assessment of constructed base courses.

  3. Resilience from coastal protection.

    Science.gov (United States)

    Ewing, Lesley C

    2015-10-28

    Coastal areas are important residential, commercial and industrial areas; but coastal hazards can pose significant threats to these areas. Shoreline/coastal protection elements, both built structures such as breakwaters, seawalls and revetments, as well as natural features such as beaches, reefs and wetlands, are regular features of a coastal community and are important for community safety and development. These protection structures provide a range of resilience to coastal communities. During and after disasters, they help to minimize damages and support recovery; during non-disaster times, the values from shoreline elements shift from the narrow focus on protection. Most coastal communities have limited land and resources and few can dedicate scarce resources solely for protection. Values from shore protection can and should expand to include environmental, economic and social/cultural values. This paper discusses the key aspects of shoreline protection that influence effective community resilience and protection from disasters. This paper also presents ways that the economic, environmental and social/cultural values of shore protection can be evaluated and quantified. It presents the Coastal Community Hazard Protection Resilience (CCHPR) Index for evaluating the resilience capacity to coastal communities from various protection schemes and demonstrates the use of this Index for an urban beach in San Francisco, CA, USA. © 2015 The Author(s).

  4. Teacher Resilience: Theorizing Resilience and Poverty

    Science.gov (United States)

    Ebersöhn, Liesel

    2014-01-01

    In this article, I hope to provide some novel insights into teacher resilience and poverty on the basis of ten-year long-term ethnographic participatory reflection and action data obtained from teachers (n?=?87) in rural (n?=?6) and urban (n?=?8) schools (n?=?14, high schools?=?4, primary schools?=?10) in three South African provinces. In…

  5. The role of self–esteem and passion in determining resilience in athletes: an application of structural equation modelling

    Directory of Open Access Journals (Sweden)

    Nazmi BAYKÖSE

    2017-12-01

    Full Text Available Aim: The aim of this study was to investigate the role of self-esteem and passion in determining resilience in athletes. Material and Methods: 105 females (Xage=19.50±1.45 and 132 males (Xage=21.27±2.76 totally 237 (Xage=20.49±2.44 university athletes voluntarily participated in this study. “Personal Information Form”, “Sport Passion scale”, “Rosenberg Self-Esteem Scale” and “Brief Resilience Scale” were administered to athletes. Descriptive analysis and “Structural Equation Modelling (SEM” was used to test the relationships among resilience with self-esteem, obsessive and harmony passion level in athletes. According to the research results, concerned findings are listed below. Results: According to results of modelling which was conducted by structural equation modelling (SEM using AMOS, regression coefficient were 0.58 (p<0.001 for resilience and self-esteem, 0.56 (p<0.001 for resilience and harmony passion, -0.34 (p<0.001 for resilience and obsessive passion. Conclusion: In conclusion, there was a significant positive relationship among resilience, self-esteem and harmony passion. Furthermore, in conclusion, there was a significant negative relationship between resilience and obsessive passion.

  6. Resilience and Higher Order Thinking

    Directory of Open Access Journals (Sweden)

    Ioan Fazey

    2010-09-01

    Full Text Available To appreciate, understand, and tackle chronic global social and environmental problems, greater appreciation of the importance of higher order thinking is required. Such thinking includes personal epistemological beliefs (PEBs, i.e., the beliefs people hold about the nature of knowledge and how something is known. These beliefs have profound implications for the way individuals relate to each other and the world, such as how people understand complex social-ecological systems. Resilience thinking is an approach to environmental stewardship that includes a number of interrelated concepts and has strong foundations in systemic ways of thinking. This paper (1 summarizes a review of educational psychology literature on PEBs, (2 explains why resilience thinking has potential to facilitate development of more sophisticated PEBs, (3 describes an example of a module designed to teach resilience thinking to undergraduate students in ways conducive to influencing PEBs, and (4 discusses a pilot study that evaluates the module's impact. Theoretical and preliminary evidence from the pilot evaluation suggests that resilience thinking which is underpinned by systems thinking has considerable potential to influence the development of more sophisticated PEBs. To be effective, however, careful consideration of how resilience thinking is taught is required. Finding ways to encourage students to take greater responsibility for their own learning and ensuring close alignment between assessment and desired learning outcomes are particularly important.

  7. Water Resilience

    Science.gov (United States)

    The Drinking Water and Wastewater Resiliency site provides tools and resources for drinking water and wastewater utilities in the full spectrum of emergency management which includes prevention, mitigation, preparedness, response and recovery.

  8. Elastic Modulus at High Frequency of Polymerically Stabilized Suspensions

    NARCIS (Netherlands)

    Nommensen, P.A.; Duits, Michael H.G.; van den Ende, Henricus T.M.; Mellema, J.

    2000-01-01

    The elastic moduli of polymerically stabilized suspensions consisting of colloidal silica particles coated with endgrafted PDMS (Mn = 80 000) in heptane, were measured as a function of concentration. And the elastic modulus at high frequency G'.. was quantitatively described by model calculations

  9. Quantifying resilience

    Science.gov (United States)

    Allen, Craig R.; Angeler, David G.

    2016-01-01

    The biosphere is under unprecedented pressure, reflected in rapid changes in our global ecological, social, technological and economic systems. In many cases, ecological and social systems can adapt to these changes over time, but when a critical threshold is surpassed, a system under stress can undergo catastrophic change and reorganize into a different state. The concept of resilience, introduced more than 40 years ago in the ecological sciences, captures the behaviour of systems that can occur in alternative states. The original definition of resilience forwarded by Holling (1973) is still the most useful. It defines resilience as the amount of disturbance that a system can withstand before it shifts into an alternative stable state. The idea of alternative stable states has clear and profound implications for ecological management. Coral reefs, for example, are high-diversity systems that provide key ecosystem services such as fisheries and coastal protection. Human impacts are causing significant, ongoing reef degradation, and many reefs have shifted from coral- to algal-dominated states in response to anthropogenic pressures such as elevated water temperatures and overfishing. Understanding and differentiating between the factors that help maintain reefs in coral-dominated states vs. those that facilitate a shift to an undesired algal-dominated state is a critical step towards sound management and conservation of these, and other, important social–ecological systems.

  10. Morphological brain measures of cortico-limbic inhibition related to resilience.

    Science.gov (United States)

    Gupta, Arpana; Love, Aubrey; Kilpatrick, Lisa A; Labus, Jennifer S; Bhatt, Ravi; Chang, Lin; Tillisch, Kirsten; Naliboff, Bruce; Mayer, Emeran A

    2017-09-01

    Resilience is the ability to adequately adapt and respond to homeostatic perturbations. Although resilience has been associated with positive health outcomes, the neuro-biological basis of resilience is poorly understood. The aim of the study was to identify associations between regional brain morphology and trait resilience with a focus on resilience-related morphological differences in brain regions involved in cortico-limbic inhibition. The relationship between resilience and measures of affect were also investigated. Forty-eight healthy subjects completed structural MRI scans. Self-reported resilience was measured using the Connor and Davidson Resilience Scale. Segmentation and regional parcellation of images was performed to yield a total of 165 regions. Gray matter volume (GMV), cortical thickness, surface area, and mean curvature were calculated for each region. Regression models were used to identify associations between morphology of regions belonging to executive control and emotional arousal brain networks and trait resilience (total and subscales) while controlling for age, sex, and total GMV. Correlations were also conducted between resilience scores and affect scores. Significant associations were found between GM changes in hypothesized brain regions (subparietal sulcus, intraparietal sulcus, amygdala, anterior mid cingulate cortex, and subgenual cingulate cortex) and resilience scores. There were significant positive correlations between resilience and positive affect and negative correlations with negative affect. Resilience was associated with brain morphology of regions involved in cognitive and affective processes related to cortico-limbic inhibition. Brain signatures associated with resilience may be a biomarker of vulnerability to disease. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  11. A practical method for estimating maximum shear modulus of cemented sands using unconfined compressive strength

    Science.gov (United States)

    Choo, Hyunwook; Nam, Hongyeop; Lee, Woojin

    2017-12-01

    The composition of naturally cemented deposits is very complicated; thus, estimating the maximum shear modulus (Gmax, or shear modulus at very small strains) of cemented sands using the previous empirical formulas is very difficult. The purpose of this experimental investigation is to evaluate the effects of particle size and cement type on the Gmax and unconfined compressive strength (qucs) of cemented sands, with the ultimate goal of estimating Gmax of cemented sands using qucs. Two sands were artificially cemented using Portland cement or gypsum under varying cement contents (2%-9%) and relative densities (30%-80%). Unconfined compression tests and bender element tests were performed, and the results from previous studies of two cemented sands were incorporated in this study. The results of this study demonstrate that the effect of particle size on the qucs and Gmax of four cemented sands is insignificant, and the variation of qucs and Gmax can be captured by the ratio between volume of void and volume of cement. qucs and Gmax of sand cemented with Portland cement are greater than those of sand cemented with gypsum. However, the relationship between qucs and Gmax of the cemented sand is not affected by the void ratio, cement type and cement content, revealing that Gmax of the complex naturally cemented soils with unknown in-situ void ratio, cement type and cement content can be estimated using qucs.

  12. Designing a spatial decision-support system to improve urban resilience to floods

    Science.gov (United States)

    Heinzlef, Charlotte; Ganz, François; Becue, Vincent; Serre, Damien

    2017-04-01

    increase of these observatories (Dolique, 2013), observatories which are focused on different fields as, risk observation (PACA regional risks observatory), environmental observation (Environmental virtual observatory), ecological observation (National ecological observatory), etc. Usually, an observatory focuses either on a scale (generally national or regional) or on a fact (risks, environment, energy, economy, etc) Our objective is to develop an observatory tested on the territory of Avignon, to design a tool for analyzing resilience according to indicators which would measure technical resilience (urban and suburban networks), urban resilience (buildings and critical infrastructures) and social resilience (knowledge of risk, memory of the disaster, perception of vulnerability). Our tool would be designed with the help of our socio-economic partner which is the city of Avignon, and would provide a clearer picture of the resilience for managers and inhabitants. It would be participatory and social insofar as, following the assessment of the existing resilience thanks to the indicators, it would be make the territory more resilient thanks to expert advices and participatory workshops for the inhabitants and managers.

  13. Urban flooding and Resilience: concepts and needs

    Science.gov (United States)

    Gourbesville, Ph.

    2012-04-01

    During the recent years, a growing interest for resilience has been expressed in the natural disaster mitigation area and especially in the flood related events. The European Union, under the Seventh Framework Programme (FP7), has initiated several research initiatives in order to explore this concept especially for the urban environments. Under urban resilience is underlined the ability of system potentially exposed to hazard to resist, respond, recover and reflect up to stage which is enough to preserve level of functioning and structure. Urban system can be resilient to lot of different hazards. Urban resilience is defined as the degree to which cities are able to tolerate some disturbance before reorganizing around a new set of structures and processes (Holling 1973, De Bruijn 2005). The United Nation's International strategy for Disaster Reductions has defined resilience as "the capacity of a system, community or society potentially exposed to hazards to adapt, by resisting or changing in order to reach and maintain an acceptable level of functioning and structure. This is determined by the degree to which the social system is capable of organizing itself to increase this capacity for learning from past disasters for better future protection and to improve risk reduction measures."(UN/ISDR 2004). According to that, system should be able to accept the hazard and be able to recover up to condition that provides acceptable operational level of city structure and population during and after hazard event. Main elements of urban system are built environment and population. Physical characteristic of built environment and social characteristic of population have to be examined in order to evaluate resilience. Therefore presenting methodology for assessing flood resilience in urban areas has to be one of the focal points for the exposed cities. Strategies under flood management planning related to resilience of urban systems are usually regarding controlling runoff

  14. Resilience Attributes of Social-Ecological Systems: Framing Metrics for Management

    Directory of Open Access Journals (Sweden)

    David A. Kerner

    2014-12-01

    Full Text Available If resilience theory is to be of practical value for policy makers and resource managers, the theory must be translated into sensible decision-support tools. We present herein a set of resilience attributes, developed to characterize human-managed systems, that helps system stakeholders to make practical use of resilience concepts in tangible applications. In order to build and maintain resilience, these stakeholders must be able to understand what qualities or attributes enhance—or detract from—a system’s resilience. We describe standardized resilience terms that can be incorporated into resource management plans and decision-support tools to derive metrics that help managers assess the current resilience status of their systems, make rational resource allocation decisions, and track progress toward meeting goals. Our intention is to provide an approachable set of terms for both specialists and non-specialists alike to apply to programs that would benefit from a resilience perspective. These resilience terms can facilitate the modeling of resilience behavior within systems, as well as support those lacking access to sophisticated models. Our goal is to enable policy makers and resource managers to put resilience theory to work in the real world.

  15. Study on Size-Dependent Young’s Modulus of a Silicon Nano beam by Molecular Dynamics Simulation

    International Nuclear Information System (INIS)

    Yu, H.; Sun, C.; Zhang, W.W.; Lei, S.Y.; Huang, K.A.

    2013-01-01

    Young’s modulus of a silicon nano beam with a rectangular cross-section is studied by molecular dynamics method. Dynamic simulations are performed for doubly clamped silicon nano beams with lengths ranging from 4.888 to 12.491 nm and cross-sections ranging from 1.22 nm ×1.22 nm to 3.39 nm × 3.39 nm. The results show that Young’s moduli of such small silicon nano beams are much higher than the value of Young’s modulus for bulk silicon. Moreover, the resonant frequency and Young’s modulus of the Si nano beam are strongly dependent not only on the size of the nano beam but also on surface effects. Young’s modulus increases significantly with the decreasing of the thickness of the silicon nano beam. This result qualitatively agrees with one of the conclusions based on a semi continuum model, in which the surface relaxation and the surface tension were taken into consideration. The impacts of the surface reconstruction with (2 ×1) dimmers on the resonant frequency and Young’s modulus are studied in this paper too. It is shown that the surface reconstruction makes the silicon nano beam stiffer than the one without the surface reconstruction, resulting in a higher resonant frequency and a larger Young’s modulus

  16. The Contribution of Individual Psychological Resilience in Determining the Professional Quality of Life of Australian Nurses

    Directory of Open Access Journals (Sweden)

    Desley G Hegney

    2015-10-01

    Full Text Available Research Topic: The aim of this study was to determine the relative contribution of trait negative affect and individual psychological resilience in explaining the professional quality of life of nurses. In particular, we sought to test whether resilience would mediate the relationship between trait negative affect and compassion satisfaction.Methods: One thousand, seven hundred and forty-three Australian nurses from the public, private and aged care sectors completed an online Qaltrics survey. The survey collected demographic data as well as measures of depression, anxiety and stress, trait negative affect, resilience and professional quality of life. Results: Significant positive relationships were observed between anxiety, depression and stress, trait negative affectivity, burnout and secondary traumatic stress (compassion fatigue. Significant negative relationships were observed between each of the aforementioned variables and resilience and compassion satisfaction. Results of mediated regression analysis indicated that resilience partially mediates the relationship between trait negative affect and compassion satisfaction. Conclusions: Results confirm the importance of both trait negative affect and resilience in explaining positive aspects of professional quality of life. Importantly, resilience was confirmed as a key variable impacting levels of compassion satisfaction and thus a potentially important variable to target in interventions aimed at improving nurse’s professional quality of life.

  17. Estimation of the Young’s modulus of cellulose Iß by MM3 and quantum mechanics

    Science.gov (United States)

    Young’s modulus provides a measure of the resistance to deformation of an elastic material. In this study, modulus estimations for models of cellulose Iß relied on calculations performed with molecular mechanics (MM) and quantum mechanics (QM) programs. MM computations used the second generation emp...

  18. Resilience: Enhancing Well-Being through the Positive Cognitive Triad

    Science.gov (United States)

    Mak, Winnie W. S.; Ng, Ivy S. W.; Wong, Celia C. Y.

    2011-01-01

    The present study tested whether the relationships among resilience, life satisfaction, and depression could be explained by positive views toward the self, the world, and the future (positive cognitive triad). Structural equation modeling and mediation analyses were conducted based on 1,419 college students in Hong Kong. The model of positive…

  19. Phenomenology of mixed modulus-anomaly mediation in fluxed string compactifications and brane models

    International Nuclear Information System (INIS)

    Choi, Kiwoon; Jeong, Kwang-Sik; Okumura, Ken-ichi

    2005-01-01

    In some string compactifications, for instance the recently proposed KKLT set-up, light moduli are stabilized by nonperturbative effects at supersymmetric AdS vacuum which is lifted to a dS vacuum by supersymmetry breaking uplifting potential. In such models, soft supersymmetry breaking terms are determined by a specific mixed modulus-anomaly mediation in which the two mediations typically give comparable contributions to soft parameters. Similar pattern of soft terms can arise also in brane models to stabilize the radion by nonperturbative effects. We examine some phenomenological consequences of this mixed modulus-anomaly mediation, including the pattern of low energy sparticle spectrum and the possibility of electroweak symmetry breaking. It is noted that adding the anomaly-mediated contributions at M GUT amounts to replacing the messenger scale of the modulus mediation by a mirage messenger scale (m 3/2 /M Pl ) α/2 M GUT where α = m 3/2 /[M 0 ln (M Pl /m 3/2 )] for M 0 denoting the modulus-mediated contribution to the gaugino mass at M GUT . The minimal KKLT set-up predicts α = 1. As a consequence, for α = O(1), the model can lead to a highly distinctive pattern of sparticle masses at TeV scale, particularly when α = 2

  20. Noninvasive Vascular Displacement Estimation for Relative Elastic Modulus Reconstruction in Transversal Imaging Planes

    Directory of Open Access Journals (Sweden)

    Chris L. de Korte

    2013-03-01

    Full Text Available Atherosclerotic plaque rupture can initiate stroke or myocardial infarction. Lipid-rich plaques with thin fibrous caps have a higher risk to rupture than fibrotic plaques. Elastic moduli differ for lipid-rich and fibrous tissue and can be reconstructed using tissue displacements estimated from intravascular ultrasound radiofrequency (RF data acquisitions. This study investigated if modulus reconstruction is possible for noninvasive RF acquisitions of vessels in transverse imaging planes using an iterative 2D cross-correlation based displacement estimation algorithm. Furthermore, since it is known that displacements can be improved by compounding of displacements estimated at various beam steering angles, we compared the performance of the modulus reconstruction with and without compounding. For the comparison, simulated and experimental RF data were generated of various vessel-mimicking phantoms. Reconstruction errors were less than 10%, which seems adequate for distinguishing lipid-rich from fibrous tissue. Compounding outperformed single-angle reconstruction: the interquartile range of the reconstructed moduli for the various homogeneous phantom layers was approximately two times smaller. Additionally, the estimated lateral displacements were a factor of 2–3 better matched to the displacements corresponding to the reconstructed modulus distribution. Thus, noninvasive elastic modulus reconstruction is possible for transverse vessel cross sections using this cross-correlation method and is more accurate with compounding.