WorldWideScience

Sample records for residues seuchenhygienische untersuchungen

  1. Investigations on the inactivation of selected bacteria and viruses during mesophilic and thermophilic anaerobic alkaline cofermentation of biological waste materials, food residues and other animal residues; Seuchenhygienische Untersuchungen zur Inaktivierung ausgewaehlter Bakterien und Viren bei der mesophilen und thermophilen anaeroben alkalischen Faulung von Bio- und Kuechenabfaellen sowie anderen Rest- und Abfallstoffen tierischer Herkunft

    Energy Technology Data Exchange (ETDEWEB)

    Hoferer, M. [Hohenheim Univ., Stuttgart (Germany). Inst. fuer Umwelt- und Tierhygiene sowie Tiermedizin mit Tierklinik

    2001-07-01

    The purpose of this study is to investigate the inactivation kinetics of a number of different bacteria (Salmonella Senftenberg, Escherichia coli O157, Enterococcus faecium) and viruses (Bovine Enterovirus (ECBO), Equine Rhinovirus (ERV), Poliovirus, Bovine Parvovirus (BPV)) during the process of anaerobic cofermentation. Experiments were conducted in a semi-technical biogas plant at the University of Hohenheim. The fermenter was fed with a mixture of slurry from pigs or cattle (75%) and leftovers (25%) and was run under mesophilic (30 C + 35 C) as well as under thermophilic temperature conditions (50 C + 55 C). Volume and filter-sandwich germ-carriers were specifically developed and/or optimised for these analyses. Parallel to the experiments at the University of Hohenheim and under almost identical process conditions, various viruses (African Swine Fever Virus, Pseudorabies Virus, Classical Swine Fever Virus, Foot and Mouth Disease Virus, Swine Vesicular Disease Virus) were examined at the Federal Research Centre for Virus Diseases of Animals in Tuebingen. The results obtained at each research institution are directly compared. (orig.)

  2. Laboratory experiments and analytical investigations on the transfer of organic substances from lignite into ground water and residue lakes during flooding of opencast lignite mines. Final report; Laborexperimente und analytische Untersuchungen ueber den Eintrag braunkohlebuertiger organischer Stoffe in Grundwaesser und Restseegewaesser bei der Flutung von Braunkohletagebauen. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Herzschuh, R.; Frauendorf, H.; Herrmann, D.; Pietzsch, K.

    2000-05-01

    Lignite samples of diffrent lithotypes and composition from opencast mines of Lusatia and the region near Leipzig were submitted to weathering processes in laboratory scale experiments and the transfer of organic matter from lignite into the hydrosphere has been observed. By means of high-performance liquid chromatography/electrospray mass spectrometry used in combination with data from gas chromatography/mass spectrometry numerous lignite-derived aromatic and heteroaromatic (poly-)carboxylic acids as well as aliphatic dicarboxylic acids could be characterized in the aqueous extracts. Investigations on water samples from lignite mining residue lakes cofirm these results. Furthermore, formation of chlororganic compounds like polychlorinated dibenzo-p-dioxine and furans (PCDD/F) and polychlorinated biphenyls (PCB), benzenes (PCBz) and phenols (PCPh) has been investigated on different lignite samples under natural weathering conditions and thermal treatment. (orig.) [German] Braunkohlen verschiedener Lithotypen und Zusammensetzung aus Tagebauen der Lausitz und der Region um Leipzig wurden in Laborexperimenten Verwitterungsprozessen unterzogen und der Uebergang organischer Materie aus der Braunkohle in die Hydrosphaere beobachtet. Mit Hilfe der HPLC-Elektrospray-MS-Untersuchungen in Kombination mit Daten aus GC-MS-Messungen konnten zahlreiche aus der Braunkohle stammende aromatische und heteroaromatische (Poly-)Carbonsaeuren sowie aliphatische Dicarbonsaeuren in den waessrigen Extrakten charakterisiert werden. Untersuchungen an Wasserproben aus bereits gefluteten Tagebaurestseen bestaetigen diese Ergebnisse. Weiterhin wurde die Bildung chlororganischer Verbindungen, wie polychlorierter Dibenzo-p-dioxine und -furane (PCDD/F) sowie polychlorierter Biphenyle (PCB), Benzole (PCBz) und Phenole (PCPh) an unterschiedlichen Braunkohleproben unter natuerlichen Bedingungen und nach thermsicher Behandlung untersucht. (orig.)

  3. Study on singular radon releases from mining residues and the impact on the outdoor radon concentration; Untersuchungen zu singulaeren Radonfreisetzungen aus bergbaulichen Hinterlassenschaften und ihre Auswirkungen auf die Radonkonzentration im Freien

    Energy Technology Data Exchange (ETDEWEB)

    Kahnt, Rene; Martin, Mirko; Pinka, Jana

    2012-03-15

    The G.E.O.S. mbH was assigned by the Bundesamt fuer Strahlenschutz to perform time resolved measurements of the radon release and time and spatial resolved studies on the atmospheric dispersion dependent on the topographic and meteorological conditions in the area of Haiden. The report includes data on the radon release from mining residues at the site Johanngeorgenstadt and measurements in other areas.

  4. Integrated project: Microbiological and physiological studies on the presence of residual concentrations in mineral-oil-contaminated soils after rehabilitation. Final report. Pt. 2; Mikrobiologische und physiologische Untersuchungen zur Frage der Restkonzentration bei der Sanierung mineraloelkontaminierter Boeden. Abschlussbericht. T. 2

    Energy Technology Data Exchange (ETDEWEB)

    Miethe, D.; Riis, V.; Stimming, M.

    1996-01-04

    It has been known for a long time that microorganisms are able to utilise mineral oils. Today various methods are practised which exploit autochthonous microorganisms` ability to utilise mineral oils. The main problem of microbial decomposition of hydrocarbons is that mineral oil residues remain. The aim of the present research project was therefore to determine the limits of the metabolisability of the substrate and find out why residues remain. Mineral oils and residual fractions differ markedly in their decomposability. Intermediate distillates are easily decomposed to a degree of 95-97% by well-adapted consorts. For high-boiling mineral oils (bp>400 C) the degree of decomposition is approx. 60%. Extracts from contaminated sites range from 40 to 60% in their degree of decomposability. The incomplete microbial decomposition of mineral oils is mainly due to their structure. There remain chemically and thermally extremely, inert hydrocarbons (mainly aliphatic and aromatic fused-ring systems) which are either hardly metabolisable or not at all. An important factor in soils or at other contaminated sites is that some of the substrate is not available because it is bound to the matrix thus increasing the proportion of residue. The next task after examining and presenting the causes of incomplete decomposition is to minimise residual mineral oil concentrations remaining after microbial decomposition. Here the use of special surfactants or of auxiliary substrates could point a way. Project applications to this end have already been submitted to the Federal Ministry for Education and Research. (orig.) [Deutsch] Dass Mikroorganismen in der Lage sind, Mineraloele zu verwerten, ist seit langem bekannt. Verfahren, die das Potential autochthoner Mikroorganismen zur Verwertung von Mineraloelen nutzen sind Praxis. Hauptproblem beim mikrobiellen Abbau der Kohlenwasserstoffe ist das Verbleiben von Mineraloelresten. Das Ziel des Forschungsvorhabens war die Ermittlung der Grenzen

  5. Contributions to the workshop `Residual ponds from open pit brown coal mining`; Beitraege zum Workshop ``Braunkohlebergbaurestseen``

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    The contributions to the workshop ``Investigations on flooding in residual ponds from open-pit mining`` deal, inter alia, with the hydrochemical development of flushing waters, the stability of the water quality of residual lakes, especially under the impact of land contamination, the influence of brine receipts by flushed residual lakes, and with the microbiological ecology of residual lakes from mining. Furthermore, geophysical studies for demonstrating paths of flow and for calculating the depth and volume of residual lakes from open-pit mining are discussed. (MSK) [Deutsch] Die Beitraege zu dem Workshop `Untersuchungen zu Flutungen in Tagebaurestseen` befassen sich unter anderem mit der hydrochemischen Entwicklung von Flutungsgewaessern, mit der Qualitaetsstabilitaet von Restseewaessern - insbesonders bei Einwirkung von Altlasten - und mit den Einfluessen von Solezufluessen bei Restseeflutung sowie mit Untersuchungen zur mikrobiologischen Oekologie in Bergbaurestseen. Desweiteren werden geophysikalische Untersuchungen zum Nachweis von Fliesswegen und die Tiefen- und Volumenberechnung eines Tagebaurestlochsees erlaeutert. (MSK)

  6. Contributions to the workshop `Residual ponds from open pit brown coal mining`; Beitraege zum Workshop ``Braunkohlebergbaurestseen``

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    The contributions to the workshop ``Investigations on flooding in residual ponds from open-pit mining`` deal, inter alia, with the hydrochemical development of flushing waters, the stability of the water quality of residual lakes, especially under the impact of land contamination, the influence of brine receipts by flushed residual lakes, and with the microbiological ecology of residual lakes from mining. Furthermore, geophysical studies for demonstrating paths of flow and for calculating the depth and volume of residual lakes from open-pit mining are discussed. (MSK) [Deutsch] Die Beitraege zu dem Workshop `Untersuchungen zu Flutungen in Tagebaurestseen` befassen sich unter anderem mit der hydrochemischen Entwicklung von Flutungsgewaessern, mit der Qualitaetsstabilitaet von Restseewaessern - insbesonders bei Einwirkung von Altlasten - und mit den Einfluessen von Solezufluessen bei Restseeflutung sowie mit Untersuchungen zur mikrobiologischen Oekologie in Bergbaurestseen. Desweiteren werden geophysikalische Untersuchungen zum Nachweis von Fliesswegen und die Tiefen- und Volumenberechnung eines Tagebaurestlochsees erlaeutert. (MSK)

  7. Untersuchungen an Eisen- und Lanthanoidhaltigen Koordinationsclustern mit Triazolat- sowie Semiquinonato-Liganden

    OpenAIRE

    Kriese, Thomas

    2016-01-01

    Magnetische Untersuchungen an Lanthanoiddimeren mit Semiquinonato-Liganden. Gemischtvalente Eisen-Koordinationsclustern. Lanthanoid-Koordinationscluster mit zwölf Lanthanoiden aber mit verschiedenen Clusterladungen.

  8. Untersuchungen über Veronica triloba (Opiz) Kerner in Rheinhessen

    OpenAIRE

    Oesau, Albert

    1981-01-01

    Untersuchungen in den Jahren 1977-1979 ergaben, daß Veronica triloba (Opiz) Kerner, eine Sippe aus dem Veronica hederifolia-Aggregat, in Rheinhessen überraschenderweise weit verbreitet ist und bisher übersehen wurde. Sie siedelt vor allem in Ackerunkraut- und Felsgrus-Gesellschaften sowie lückigen Trockenrasen, ohne eine gesellschaftsspezifische Bindung zu zeigen. Gut ausgeprägte morphologische Merkmale gestatten eine sichere Differenzierung gegenüber den übrigen Sippenvertretern V. hederifol...

  9. Pharmakobotanische Untersuchungen von Lavendelsorten auf dem Plattensee- Plateau

    Directory of Open Access Journals (Sweden)

    Tóth, Frida

    2014-09-01

    Full Text Available Auf dem Hof Dörgicsei Levendula Major GmbH wurden 9 Lavendelsorten (6 Sorten von Lavandula angustifolia und 3 Sorten von Lavandula x intermedia untersucht. Neben den morphologischen und Wachstumseigenschaften wurden auch Frisch- und Trockengewichte bewertet. Quantitative und qualitative Untersuchungen von den Blüten- und Ätherischöldrogen wurden auch durchgeführt. Die statistische Analyse zeigte signifikant höhere Erträge bei den Sorten L. angustifolia ’Essence Purple’ und L. x intermedia ’Edelweiss’. Gehalt und Zusammensetzung von ätherischem Öl war eindeutig bei der Sorte L. angustifolia ’Ellagance Purple’ am günstigsten.

  10. Untersuchungen ausgewählter Nierenkrankheiten beim Frettchen (Mustela putorius f. furo L. 1758)

    OpenAIRE

    Riechert, Maren

    2005-01-01

    Um Häufigkeit, Bedeutung und diätetische Ursachen veränderter Nieren beim Frettchen zu erarbeiten, wurden die Nieren von 63 Heimtieren und 120 Labortieren sonographisch untersucht und Fütterungsanalysen durchgeführt. Anatomische Studien an gesunden Nieren wurden für den Vergleich mit den veränderten Nieren angefertigt. Die Untersuchungen zur Anatomie ergaben für das Frettchen Nieren vom einfachen glatten und einwarzigen Typ. Des Weiteren konnten mithilfe von anatomischen ...

  11. Investigations of pollutant migration using lysimeters; Untersuchungen zur Schadstoff-Migration in Lysimetern

    Energy Technology Data Exchange (ETDEWEB)

    Klotz, D. (ed.)

    2002-07-01

    The third GSF Lysimeter Workshop focused on pollutant migration in underground strata, i.e. the dispersion of water constituents as referred to water transport on the basis of ideal tracer investigations. [German] Der am 29./30.04.2002 stattgefundene Workshop 'Untersuchungen zur Schadstoffmigration in Lysimetern' war der dritte GSF-Lysimeterworkshop nach denen in den Jahren 1998 und 2000 veranstalteten. Nachdem in den Jahren 1998 und 2000 der Wassertransport und die Bestimmung der Sickerwassergeschwindigkeit in Lysimetern im Mittelpunkt standen, war 2002 die Schadstoffmigration im Untergrund der Schwerpunkt der Vortraege und Poster. Unter Migration wird das Ausbreitungsverhalten von Wasserinhalts-(Fremd-, Schad-)Stoffen bezogen auf den Wassertransport, bestimmt mit idealen Tracern, verstanden. (orig.)

  12. Investigation of LPP combustors under elevated pressure conditions; Untersuchungen zu LPP-Flugtriebwerksbrennkammern unter erhoehtem Druck

    Energy Technology Data Exchange (ETDEWEB)

    Fink, R.

    2001-05-01

    The development of new combustor concepts for aero engines to meet future emissions regulations in based on a detailed knowledge of the combustion process and the velocity field. In the presented thesis, non intrusive measurements were performed in a model combustion chamber under almost realistic pressure and temperature conditions. The species OH, NO, unburned hydrocarbons and fuel droplets were detected in 2 dimensions with the Laser Induced Fluorescence (LIF). The velocity field was measured with the Particle Image Velocimetry technique (PIV). [German] Die Weiterentwicklung neuer Brennkammerkonzepte zur Erfuellung zukuenftiger Schadstoffemissionsrichtlinien erfordert genaue Kenntnisse der ablaufenden Verbrennungs- und Stroemungsvorgaenge in der Brennkammer. Bei den in der Arbeit vorgestellten Untersuchungen wurden in einer LPP-Modellbrennkammer unter annaehernd realistischen Eintrittsbedingungen die Spezies OH, NO, unverbrannte Kohlenwasserstoffe sowie noch fluessiger Brennstoff zweidimensional anhand der Laserinduzierten Fluoreszenz (LIF) nachgewiesen. Das Stroemungsfeld wurde mit Hilfe der Particle Image Velocimetry (PIV) gemessen.

  13. Untersuchungen zur Involution der Vagina and Zervix beim Rind post partum unter Berücksichtigung der Zervix als Geburtshindernis

    OpenAIRE

    Wehrend, Axel

    2002-01-01

    Ziel der vorliegenden Arbeit war es die physiologische Involution der Zervix im Vergleich zur Vagina beim Rind während der ersten zehn Tage post partum zu charakterisieren. Weiterhin sollte durch klinische Untersuchungen an Kühen nach Dystokie und einer retrospektiven Datenauswertung von Schwergeburten unterschiedlicher Tierarten der Anteil zervikal bedingter Geburtsstockungen im Interspeziesvergleich analysiert und Einflussfaktoren auf das Auftreten dieser Dystokieform sowie Störungen in der...

  14. Clinically relevant incidental cardiovascular findings in CT examinations; Klinisch relevante kardiovaskulaere Zufallsbefunde bei CT-Untersuchungen

    Energy Technology Data Exchange (ETDEWEB)

    Voigt, P.; Fahnert, J.; Kahn, T.; Surov, A. [Universitaetsklinikum Leipzig, Klinik fuer Diagnostische und Interventionelle Radiologie, Leipzig (Germany); Schramm, D.; Bach, A.G. [Universitaetsklinikum Halle (Saale), Klinik fuer Radiologie, Halle (Germany)

    2017-04-15

    Incidental cardiovascular findings are a frequent phenomenon in computed tomography (CT) examinations. As the result of a dedicated PubMed search this article gives a systemic overview of the current literature on the most important incidental cardiovascular findings, their prevalence and clinical relevance. The majority of incidental cardiovascular findings are of only low clinical relevance; however, highly relevant incidental findings, such as aortic aneurysms, thromboses and thromboembolic events can also occasionally be found, especially in oncology patients. The scans from every CT examination should also be investigated for incidental findings as they can be of decisive importance for the further clinical management of patients, depending on their clinical relevance. (orig.) [German] Inzidentelle kardiovaskulaere Befunde sind ein haeufiges Phaenomen bei CT-Untersuchungen. Mit dieser Arbeit soll nach gezielter PubMed-Recherche ein systematischer Literaturueberblick ueber die wichtigsten kardiovaskulaeren Zufallsbefunde sowie deren Haeufigkeit und klinische Relevanz gegeben werden. Die Mehrzahl der inzidentellen kardiovaskulaeren Befunde sind klinisch nur von untergeordneter Bedeutung, allerdings werden immer wieder auch hochgradig relevante Zufallsbefunde wie beispielsweise Aortenaneurysmata oder - gerade bei onkologischen Patienten - Thrombosen und thrombembolische Ereignisse detektiert. Jede CT-Untersuchung sollte gezielt nach inzidentellen Befunden durchsucht werden, da diese je nach klinischer Relevanz von entscheidender Bedeutung fuer das weitere klinische Management des Patienten sein koennen. (orig.)

  15. PAH analysis in Leipzig allotment soils; Untersuchungen zum Gefaehrdungspotential polycyclischer aromatischer Kohlenwasserstoffe (PAK) in Leipziger Kleingartenboeden

    Energy Technology Data Exchange (ETDEWEB)

    Bittrich, R.; Butze, B.; Mueller, S.; Prawalsky, R.; Stoye, H. [Umwelt-Consult e.V., Leipzig (Germany)

    2000-09-01

    Soils in 29 allotments were analyzed systematically with a view to the following aspects: Concentration ratios of the 16 components analyzed. Occurrence and classification of so-called PAH patterns. Interdependences between PAH patterns and soil features. PAH concentrations and soil-immanent buffer characteristics (humus concentration, pH, clay concentration, sesquioxide concentrations, exchange capacity). [German] Die vorliegende Arbeit konzentriert sich auf die Untersuchung der PAK-Belastung kleingaertnerisch genutzter Boeden. Die hier vorgestellten Ergebnisse resultieren aus Probjekten von Umwelt-Consult e.V. aus den Jahren 1995 bis 1997 im Auftrag der Stadt Leipzig und dem unter fachlicher Begleitung des Referates Geochemie der Abt. Boden/Geochemie vom LfUG gefoerderten Forschungsvorhaben 'Untersuchungen zum Gefaehrdungspotential polycyclischer aromatischer Kohlenwasserstoffe (PAK) in Boeden der Stadt Leipzig'. Hierbei wurden systematisch Boeden in 29 Kleingartenanlagen untersucht. Folgende Fragestellungen sollten beantwortet werden: Stehen die PAK-Konzentrationen der 16 analysierten Einzelkomponenten in bestimmten Groessenverhaeltnissen zueinander? Sind sogenannte PAK-Muster zu erkennen und lassen sich diese klassifizieren? Welche Beziehungen gibt es zwischen PAK-Mustern und Bodenmerkmalen? Korrespondieren die PAK-Konzentrationen (Gesamt-PAK, Einzelkomponenten) im Boden und deren bodenhorizont-bezogene Abfolge mit der Auspraegung bodenimmanenter Puffermerkmale (Humusgehalt, pH-Wert, Tongehalt, Gehalt an Sesquioxiden, Austauschkapazitaet)? (orig.)

  16. Residual stresses

    International Nuclear Information System (INIS)

    Sahotra, I.M.

    2006-01-01

    The principal effect of unloading a material strained into the plastic range is to create a permanent set (plastic deformation), which if restricted somehow, gives rise to a system of self-balancing within the same member or reaction balanced by other members of the structure., known as residual stresses. These stresses stay there as locked-in stresses, in the body or a part of it in the absence of any external loading. Residual stresses are induced during hot-rolling and welding differential cooling, cold-forming and extruding: cold straightening and spot heating, fabrication and forced fitting of components constraining the structure to a particular geometry. The areas which cool more quickly develop residual compressive stresses, while the slower cooling areas develop residual tensile stresses, and a self-balancing or reaction balanced system of residual stresses is formed. The phenomenon of residual stresses is the most challenging in its application in surface modification techniques determining endurance mechanism against fracture and fatigue failures. This paper discusses the mechanism of residual stresses, that how the residual stresses are fanned and what their behavior is under the action of external forces. Such as in the case of a circular bar under limit torque, rectangular beam under limt moment, reclaiming of shafts welds and peening etc. (author)

  17. Logfile-Analysen: Möglichkeiten und Grenzen ihrer Nutzung bei Untersuchungen zur Mensch-Maschine-Interaktion

    Directory of Open Access Journals (Sweden)

    Burkhard Priemer

    2004-06-01

    Full Text Available Die Aufzeichnung der Computernutzung in automatisch generierten elektronischen Protokollen – so genannten Logfiles – entwickelt sich zu einer zunehmend genutzten Erfassungsmethode bei Untersuchungen der Interaktion zwischen Mensch und Computer. Dieser Beitrag bietet einen einführenden Überblick über Verfahren der Logfile-Aufzeichnung und der Analyse der Daten. Neben einer Erläuterung der Begrifflichkeiten werden sowohl Vor- und Nachteile von Logfile-Auswertungen als auch grundlegende Methoden, mathematische Beschreibungen des Nutzerverhaltens und Ansätze der Typisierung von Nutzeraktivitäten dargestellt.

  18. Residual stresses

    International Nuclear Information System (INIS)

    Macherauch, E.

    1978-01-01

    Residual stresses are stresses which exist in a material without the influence of external powers and moments. They come into existence when the volume of a material constantly changes its form as a consequence of mechanical, thermal, and/or chemical processes and is hindered by neighbouring volumes. Bodies with residual stress are in mechanical balance. These residual stresses can be manifested by means of all mechanical interventions disturbing this balance. Acoustical, optical, radiological, and magnetical methods involving material changes caused by residual stress can also serve for determining residual stress. Residual stresses have an ambivalent character. In technical practice, they are feared and liked at the same time. They cause trouble because they can be the cause for unexpected behaviour of construction elements. They are feared since they can cause failure, in the worst case with catastrophical consequences. They are appreciated, on the other hand, because, in many cases, they can contribute to improvements of the material behaviour under certain circumstances. But they are especially liked for their giving convenient and (this is most important) mostly uncontrollable explanations. For only in very few cases we have enough knowledge and possibilities for the objective evaluation of residual stresses. (orig.) [de

  19. Solid residues

    International Nuclear Information System (INIS)

    Mulder, E.; Duin, P.J. van; Grootenboer, G.J.

    1995-01-01

    A summary is presented of the many investigations that have been done on solid residues of atmospheric fluid bed combustion (AFBC). These residues are bed ash, cyclone ash and bag filter ash. Physical and chemical properties are discussed and then the various uses of residues (in fillers, bricks, gravel, and for recovery of aluminium) are summarised. Toxicological properties of fly ash and stack ash are discussed as are risks of pneumoconiosis for workers handling fly ash, and contamination of water by ashes. On the basis of present information it is concluded that risks to public health from exposure to emissions of coal fly ash from AFBC appear small or negligible as are health risk to workers in the coal fly ash processing industry. 35 refs., 5 figs., 12 tabs

  20. Residual basins

    International Nuclear Information System (INIS)

    D'Elboux, C.V.; Paiva, I.B.

    1980-01-01

    Exploration for uranium carried out over a major portion of the Rio Grande do Sul Shield has revealed a number of small residual basins developed along glacially eroded channels of pre-Permian age. Mineralization of uranium occurs in two distinct sedimentary units. The lower unit consists of rhythmites overlain by a sequence of black shales, siltstones and coal seams, while the upper one is dominated by sandstones of probable fluvial origin. (Author) [pt

  1. Feinkartierung von Loss of Heterozygosity-Intervallen auf Chromosom 11p und Untersuchungen zum Expressions- und Methylierungsstatus von FANCF beim Ovarialkarzinom

    OpenAIRE

    Schulze, Kathrin

    2011-01-01

    Um Tumorsuppressorgene beim Ovarialkarzinom zu identifizieren wurde eine Kartierung von LOH-Intervallen der Region 11p15.5 - 11p11.2 mittels 11 Mikrosatellitenmarkern an 47 Ovarialtumorproben vorgenommen. Im Bereich des ST5- und AFM255/KAI1-Locus konnten potentielle Intervalle abgegrenzt werden. Das Fanconi Anämie Gen FANCF wurde für Untersuchungen zum Expressions- und Methylierungsstatus ausgewählt, da dessen Abschaltung mit einem besseren Ansprechen auf Cisplatin bei Ovarialkarzinompatienti...

  2. Residual nilpotence and residual solubility of groups

    International Nuclear Information System (INIS)

    Mikhailov, R V

    2005-01-01

    The properties of the residual nilpotence and the residual solubility of groups are studied. The main objects under investigation are the class of residually nilpotent groups such that each central extension of these groups is also residually nilpotent and the class of residually soluble groups such that each Abelian extension of these groups is residually soluble. Various examples of groups not belonging to these classes are constructed by homological methods and methods of the theory of modules over group rings. Several applications of the theory under consideration are presented and problems concerning the residual nilpotence of one-relator groups are considered.

  3. Studies on agglomeration of colloidal suspensions in an alternating electric field; Untersuchungen zur Agglomeration kolloidaler Suspensionen im elektrischen Wechselfeld

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, M. [Inst. fuer Mechanische Verfahrenstechnik und Mechanik, Univ. Karlsruhe (Germany); Loeffler, F. [Inst. fuer Mechanische Verfahrenstechnik und Mechanik, Univ. Karlsruhe (Germany)

    1996-07-01

    Colloidal solutions contain particles in the {mu}m range whose agglomeration and coagulation is of interest for certain applications. `Electrocoagulation` means that in an electric field droplets or particles in a disperse phase have higher kinetic energy so that the probability of overcoming repulsive forces and of forming bigger aggregates will increase. The electrocoagulation technique is applied for emulsion cracking of water-in-oil systems (desalination and dewatering of petroleum, petroleum cracking) and, in some cases, also for cracking oil-in-water systems. Removal of colloidal solids from aqueous solution during electrochemical waste water treatment is often carried out with the aid of dissolving aluminium or iron electrodes. The authors describe experiments in which the flow of an electric current, which would cause the electrodes to dissolve, was to be prevented. An alternating field was to induce oscillation of the particles, i.e. relative motion of the particles with respect to each other. (orig./SR) [Deutsch] Kolloidale Loesungen enthalten Partikel im {mu}m-Bereich. In manchen Bereichen ist deren Agglomeration bzw. Koagulation von Interesse. Unter dem Begriff der Elektrokoagulation versteht man im allgemeinen das Phaenomen, dass in einem elektrischen Feld Tropfen oder Partikel in einer dispersen Phase eine hoehere kinetische Energie besitzen, und dadurch die Wahrscheinlichkeit zur Ueberwindung von Abstossungskraeften und zur Bildung groesserer Aggregate steigt. Das Verfahren der Elektrokoagulation wird bisher zur Emulsionsspaltung von Wasser/Oel-Systemen (Entsaltzung und Entwaesserung von Erdoel/Erdoelspaltung) und z.T. auch zur Spaltung von Oel/Wasser-Systemen eingesetzt. Zur Entfernung kolloidaler Feststoffe aus waessrigen Loesungen bei der elektrochemischen Aufarbeitung von Abwasser wird haeufig mit sich aufloesenden Aluminium- oder Eisenelektroden gearbeitet. In den im folgenden dargestellten Untersuchungen sollte ein Stromfluss durch die

  4. Toxicology of ozone on the basis of animal and clinical experimental studies; Toxikologie von Ozon auf der Grundlage tier- und klinisch-experimenteller Untersuchungen

    Energy Technology Data Exchange (ETDEWEB)

    Kappus, H. [Humboldt-Universitaet, Berlin (Germany). Virchow-Klinikum

    2000-07-01

    This synopsis focuses on the toxic effects of ozone in humans and animals following inhalation. It is limited to studies that deal exclusively with ozone. These studies are reviewed with respect to action mechanisms underlying ozone-specific toxicity and, where present, dose-effect relationships. Both aspects today are indispensable for any risk assessment. As there have been very many studies on this issue and the number of publications increases every year, the present paper only quotes a few review articles and does not mention original papers unless they are of recent date or offer new information. [German] Diese Uebersicht konzentriert sich auf die toxischen Effekte von Ozon nach Inhalation bei Mensch und Tier. Nur Untersuchungen mit Ozon alleine werden miteinbezogen. Sie werden hauptsaechlich im Zusammenhang mit dem Wirkungsmechanismus der Ozon-bedingten Toxizitaet und, soweit vorhanden, Konzentrations-Wirkungsbeziehungen behandelt. Beide Aspekte sind heute fuer eine Risikoabschaetzung unerlaesslich. Da sehr viele Untersuchungen vorliegen und die Zahl der Veroeffentlichungen jaehrlich ansteigt, sollen hier nur einige neuere Uebersichtsarbeiten zitiert werden und Originalarbeiten nur dann erwaehnt werden, wenn sie neueren Datums sind bzw. zusaetzliche Informationen bringen. (orig.)

  5. Image quality of paper prints compared to film copies in CT investigations; Bildqualitaet von Papierausdrucken zur Befunddokumentation im Vergleich zu Laserfilmen bei MSCT-Untersuchungen

    Energy Technology Data Exchange (ETDEWEB)

    Bley, T.; Burger, D.; Ghanem, N.; Thuerl, C.; Saueressig, U.; Kotter, E.; Langer, M. [Abt. Roentgendiagnostik, Radiologische Klinik, Universitaetsklinikum Freiburg (Germany)

    2002-04-01

    Purpose: Evaluation of image quality of paper prints in routine CT investigations. Method: The image quality of paper prints from 104 CT scans of daily routine investigations was analysed by three observer three observers according to a five-point ranking scale for contrast, grey level, spatial resolution, and subjective confidence in correct evaluation. Each study was rated ''acceptable'' or ''not acceptable for documentation''. Results: In 312 ratings the mean grade for contrast was 2.7, for grey levels 3.2, and for spatial resolution 3.3. Grades ranged from 1 = very good to 5 = insufficient. Subjective confidence in correct evaluation was rated as ''certain'' in 77.4%, ''likely'' in 18.4% and ''impossible to evaluate'' in 4.2% of cases. 93.7% of printed CT images were rated ''acceptable for documentation''. Conclusion: Image quality of paper prints does not reach the quality of laser films concerning its contrast, grey levels, and spatial resolution. Nevertheless, paper prints are acceptable for documentation of findings in most CT investigations. A high confidence in correct evaluation was found. Limitations are found in documentation of small coin lesions of the lung and ischemic lesions of the neurocranium. (orig.) [German] Ziel: Qualitaetsbewertung von Papierausdrucken zur Bilddokumentation von Routine-CT-Untersuchungen. Material und Methoden: Bei 104 Routine-CT-Untersuchungen werteten drei Untersucher (insgesamt 312 Auswertungen) die Bildqualitaet von Papierausdrucken im Vergleich zu Laserfilmen bezueglich Kontrast, Grauwerten und Aufloesung sowie ''persoenlicher Befundsicherheit'' (Skala 1 - 5) aus. Abschliessend wurde entschieden, ob der Papierausdruck fuer die Befunddokumentation ausreiche. Ergebnisse: Mit Bewertungen zwischen 1 fuer ''sehr gut'' und 5 fuer &apos

  6. Investigations of co-combustion of plastics in a coal dust furnace; Untersuchungen zur Mitverbrennung von Kunststoffen in einer Kohlestaubfeuerung

    Energy Technology Data Exchange (ETDEWEB)

    Gerhardt, T.; Spliethoff, H.; Hein, K.R.G. [Stuttgart Univ. (Germany). Inst. fuer Verfahrenstechnik und Dampfkesselwesen (IVD); Christill, M.; Kicherer, A.; Seifert, H. [BASF AG, Verfahrenstechnik-ZET/EH-L544, Ludwigshafen am Rhein (Germany)

    1996-12-31

    In a cooperation project of the Institute of Process Engineering and Power Plant TEchnology (IVD) at the University of Stuttgart and the BASF AG, investigations of co-combustion of plastic material in a coal dust furnace were carried out. The central question of the research work was the ignition and burnout of the particles in dependence of the residence time in the hot part of the furnace. Particle sizes were varied with the aim to define the largest possible particle size in order to minimize the cost of fuel preparation by grinding. On the other hand, tests were made with pure materials and synthetic mixtures of these in order to characterize the influence of different types of plastic. The investigations showed that plastics are suited as fuels for coal dust furnaces, and that the cost of fuel preparation can be reduced to an acceptable level. With polyethylene, which is difficult to ignite, an upper particle size limit of 1.25 to 1.5 mm was reached in the IVD test stand. In industrial applications with a different burner arrangement, even better results may be expected. (orig/AKB) [Deutsch] In einer Zusammenarbeit zwischen dem Institut fuer Verfahrenstechnik und Dampfkesselwesen (IVD) der Universitaet Stuttgart und der BASF AG wurden Versuche zur Coverbrennung von Kunststoffen in einer Kohlenstaubfeuerung durchgefuehrt. Im Mittelpunkt der Untersuchungen standen Zuendung und Abbrand der Kunststoffpartikel in Abhaengigkeit von der Verweilzeit im heissen Bereich der Brennkanner. Variiert wurden hierzu zum einen die Partikelgroessen mit dem Ziel, den Aufbereitungsaufwand durch Zerkleinerung zu minimieren. Zur Charakterisierung der Einfluesse verschiedener Kunststoffarten wurden die Versuche mit unterschiedlichen Reinkunststoffen und synthetischen Mischungen durchgefuehrt. Die Versuche zeigen, dass sich Kunststoffe mit vertretbarem Mahlaufwand in der Staubfeuerung einsetzen lassen. Am Beispiel des Polyethylen, eines der thermogravimetrischen Analyse nach relativ

  7. Investigations of co-combustion of plastics in a coal dust furnace; Untersuchungen zur Mitverbrennung von Kunststoffen in einer Kohlestaubfeuerung

    Energy Technology Data Exchange (ETDEWEB)

    Gerhardt, T; Spliethoff, H; Hein, K R.G. [Stuttgart Univ. (Germany). Inst. fuer Verfahrenstechnik und Dampfkesselwesen (IVD); Christill, M; Kicherer, A; Seifert, H [BASF AG, Verfahrenstechnik-ZET/EH-L544, Ludwigshafen am Rhein (Germany)

    1997-12-31

    In a cooperation project of the Institute of Process Engineering and Power Plant TEchnology (IVD) at the University of Stuttgart and the BASF AG, investigations of co-combustion of plastic material in a coal dust furnace were carried out. The central question of the research work was the ignition and burnout of the particles in dependence of the residence time in the hot part of the furnace. Particle sizes were varied with the aim to define the largest possible particle size in order to minimize the cost of fuel preparation by grinding. On the other hand, tests were made with pure materials and synthetic mixtures of these in order to characterize the influence of different types of plastic. The investigations showed that plastics are suited as fuels for coal dust furnaces, and that the cost of fuel preparation can be reduced to an acceptable level. With polyethylene, which is difficult to ignite, an upper particle size limit of 1.25 to 1.5 mm was reached in the IVD test stand. In industrial applications with a different burner arrangement, even better results may be expected. (orig/AKB) [Deutsch] In einer Zusammenarbeit zwischen dem Institut fuer Verfahrenstechnik und Dampfkesselwesen (IVD) der Universitaet Stuttgart und der BASF AG wurden Versuche zur Coverbrennung von Kunststoffen in einer Kohlenstaubfeuerung durchgefuehrt. Im Mittelpunkt der Untersuchungen standen Zuendung und Abbrand der Kunststoffpartikel in Abhaengigkeit von der Verweilzeit im heissen Bereich der Brennkanner. Variiert wurden hierzu zum einen die Partikelgroessen mit dem Ziel, den Aufbereitungsaufwand durch Zerkleinerung zu minimieren. Zur Charakterisierung der Einfluesse verschiedener Kunststoffarten wurden die Versuche mit unterschiedlichen Reinkunststoffen und synthetischen Mischungen durchgefuehrt. Die Versuche zeigen, dass sich Kunststoffe mit vertretbarem Mahlaufwand in der Staubfeuerung einsetzen lassen. Am Beispiel des Polyethylen, eines der thermogravimetrischen Analyse nach relativ

  8. MRI of the hyaline knee joint cartilage. Animal experimental and clinical studies; MRT des hyalinen Kniegelenkknorpels. Tierexperimentelle und klinische Untersuchungen

    Energy Technology Data Exchange (ETDEWEB)

    Adam, G. [Technische Hochschule Aachen (Germany). Klinik fuer Radiologische Diagnostik; Prescher, A. [Technische Hochschule Aachen (Germany). Inst. fuer Anatomie; Nolte-Ernsting, C. [Technische Hochschule Aachen (Germany). Klinik fuer Radiologische Diagnostik; Buehne, M. [Technische Hochschule Aachen (Germany). Klinik fuer Radiologische Diagnostik; Scherer, K. [Technische Hochschule Aachen (Germany). Inst. fuer Versuchstierkunde; Kuepper, W. [Technische Hochschule Aachen (Germany). Inst. fuer Versuchstierkunde; Guenther, R.W. [Technische Hochschule Aachen (Germany). Klinik fuer Radiologische Diagnostik

    1994-02-01

    The value of MR imaging for the detection of hyaline cartilage lesions using 2-D spin-echo and 3-D gradient-echo imaging was evaluated in an animal experiment in 10 dogs and in a clinical study in 30 patients. MR imaging findings were compared with histopathological and arthroscopy findings, respectively. Using MRI neither grade I nor grade II hyaline cartilage lesions were detectable. In the animal experiments 77% of grade III lesions and all the grade IV lesions were seen. However, in the clinical study only about the half of grade III and IV lesions were detected. 3-D gradient-echo MR imaging was superior to 2-D spin-echo imaging (p<0.001), while 3-D FLASH and 3-D FISP did not differ significantly in the detection rate (p<0.34). 3-D gradient-echo MR imaging seems to be the best method for the delineation of high grade cartilage lesions. However, early stages of cartilage degeneration are invisible even with this imaging modality. (orig.) [Deutsch] Die Wertigkeit der MRT in der Erfassung von Knorpellaesionen mit 2-D-Spin-Echo- und 3-D-Grafienten-Echo-Sequenzen wurde in einer tierexperimentellen Untersuchung an 10 Hunden sowie in einer klinischen Studie an 30 Patienten ueberprueft. Die kernspintomographischen Ergebnisse wurden mit dem pathologisch-anatomischen Befund bzw. der Arthroskopie verglichen. MR-tomographisch konnten weder Grad-I- noch Grad-II-Knorpellaesionen erfasst werden. Die Erkennbarkeitsrate der Grad-III- und -IV-Laesionen lag fuer die tierexperimentellen Untersuchungen bei 77 bzw. 100%, waehrend klinisch nur etwa 50% dieser Veraenderungen erkannt werden konnten. Dabei waren die 3-D-Gradienten-Echo-Sequenzen den 2-D-Spin-Echo-Sequenzen signifikant ueberlegen (p<0,001), waehrend sich die 3-D-Gradienten-Echo-Sequenzen FISP und FLASH nicht voneinander unterschieden (p<0,34). Derzeit muessen die 3-D-Gradienten-Echo-Sequenzen als die beste Methode zur Erfassung hoehergradiger Knorpellaesionen angesehen werden. Fruehe Stadien der Knorpelschaedigung sind

  9. Quantum chemical analysis of binary and ternary ferromagnetic alloys; Quantenchemische Untersuchungen binaerer und ternaerer ferromagnetischer Legierungen

    Energy Technology Data Exchange (ETDEWEB)

    Jacobs, Yasemin Erika Charlotte

    2007-02-23

    In this work the electronic structures, densities of states, chemical bonding, magnetic exchange Parameters and Curie temperatures of binary and ternary ferromagnetic alloys are analyzed. The electronic structure of ferromagnetic MnAl has been calculated using density-functional techniques (TB-LMTO-ASA, FPLAPW) and quantum chemically analyzed by means of the crystal orbital Hamilton population analysis. The crystal structure of the ferromagnetic tetragonal MnAl may be understood to originate from the structure of nonmagnetic cubic MnAl with a CsCl motif through a two-step process. While the nonmagnetic cubic structure is stable against a structural deformation, antibonding Mn-Mn interactions at the Fermi level lead to spin polarization and the onset of magnetism, i.e., a symmetry reduction taking place solely in the electronic degrees of freedom, by that emptying antibonding Mn-Mn states. Residual antibonding Al--Al states can only be removed by a subsequent, energetically smaller structural deformation towards the tetragonal system. As a final result, homonuclear bonding is strengthened and heteronuclear bonding is weakened. Corresponding DFT calculations of the electronic structure as well as the calculation of the chemical bonding and the magnetic exchange interactions have been performed on the basis of LDA and GGA for a series of ferromagnetic full Heusler alloys of general formula Co2MnZ (Z=Ga,Si,Ge,Sn), Rh2MnZ (Z=Ge,Sn,Pb), Ni2MnZ (Z=Ga,In,Sn), Pd2MnZ (Z=Sn,Sb) and Cu2MnZ (Z=Al,In,Sn). The connection between the electronic spectra and the magnetic interactions have been studied. Correlations between the chemical bondings in Heusler alloys derived from COHP analysis and magnetic phenomena are obvious, and different mechanisms leading to spin polarization and ferromagnetism are derived. The band dependence of the exchange parameters, their dependence on volume and valence electron concentration have been thoroughly analyzed within the Green function technique

  10. Biometrische Untersuchungen des Stylopodiums, Zygopodiums und Metapodiums pleistozäner Ursiden im Hinblick auf die Evolution des Höhlenbären und die Klassifizierung des Fundmaterials Einhornhöhle / Harz

    OpenAIRE

    Athen, Kerstin Anja

    2007-01-01

    In der vorliegenden Dissertation "Biometrische Untersuchungen des Stylopodiums, Zygopodiums und Metapodiums pleistozäner Ursiden im Hinblick auf die Evolution des Höhlenbären und die Klassifizierung des Fundmaterials Einhornhöhle / Harz" wurden Daten des oberpliozänen Ursus etruscus, des pleistozänen Ursus deningeri sowie des Ursus spelaeus ausgewertet. Zur Datenerhebung wurden 249 Messgrößen an den Skelettelementen Humerus, Ulna, Radius, Metacarpalia I-V, Femur, Tibia, Fibula und Metatarsali...

  11. Residual gas analysis

    International Nuclear Information System (INIS)

    Berecz, I.

    1982-01-01

    Determination of the residual gas composition in vacuum systems by a special mass spectrometric method was presented. The quadrupole mass spectrometer (QMS) and its application in thin film technology was discussed. Results, partial pressure versus time curves as well as the line spectra of the residual gases in case of the vaporization of a Ti-Pd-Au alloy were demonstrated together with the possible construction schemes of QMS residual gas analysers. (Sz.J.)

  12. Investigations for assessing the health hazards of dichloromethane exposure. Final report; Untersuchungen zur Abschaetzung des gesundheitlichen Risikos infolge Dichlormethanexposition. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Pankow, D. [Halle-Wittenberg Univ., Halle (Germany). Inst. fuer Pharmakologie und Toxikologie

    1994-04-01

    The oxidative CYP2E1-catalyzed dechlorination of dichloremethane (DCM) is a saturable pathway with high affinity and low capacity. In general, due to increasing DCM concentration in the inhaled air COHb values up to 12% are expected, but higher COHb levels were found according to some case reports. It was the aim of this study to characterize the DCM-derived COHb formation and to test effects of DCM on the cardiovascular system using animal models. The results show that a high CYP2E1 activity correlates with enhanced COHb formation. The COHb formation is inhibited and the DCM level in the blood enhanced after simultaneous exposure to DCM and solvents or drugs known as substrates of CYP2E1. Therefore, the risk assessment of DCM exposure must comprimise a possible additional uptake of a substrate or inducer of CYP2E1. Existing PBPK models proved to be an insufficient description in cases of an accidental scenario, a short exposure to very high concentration of DCM. The moderate CO hypoxia following DCM exposure is determined not only by the carboxyhemoglobinemia but also by an inhibition of cytochrome c oxidase activity. Cardiovascular dysfunctions, mainly arrhythmias, are detectable after exposure to relatively high DCM concentration as well as under pathophysiological conditions which per se influenced the cardiovascular system. (orig.) [Deutsch] Die zu CO fuehrende oxydative, CYP2E1-katalysierte Dechlorierung von Dichlormethan (DCM) verfuegt ueber eine hohe Affinitaet bei begrenzter Kapazitaet, es handelt sich um einen saettigbaren Stoffwechselweg. Im allgemeinen werden trotz steigender DCM-Konzentration in der eingeatmeten Luft Werte von 10-12% COHb nicht ueberschritten. Vergiftungsfaelle mit weitaus hoeheren COHb-Spiegeln wurden aber beschrieben. Ziel der tierexperimentellen Untersuchungen war es, die DCM-bedingte COHb-Bildung naeher zu charakterisieren und die Wirkung von DCM auf kardiovaskulaere Funktionen zu pruefen. Die Resultate zeigen, dass es bei

  13. Handling of Solid Residues

    International Nuclear Information System (INIS)

    Medina Bermudez, Clara Ines

    1999-01-01

    The topic of solid residues is specifically of great interest and concern for the authorities, institutions and community that identify in them a true threat against the human health and the atmosphere in the related with the aesthetic deterioration of the urban centers and of the natural landscape; in the proliferation of vectorial transmitters of illnesses and the effect on the biodiversity. Inside the wide spectrum of topics that they keep relationship with the environmental protection, the inadequate handling of solid residues and residues dangerous squatter an important line in the definition of political and practical environmentally sustainable. The industrial development and the population's growth have originated a continuous increase in the production of solid residues; of equal it forms, their composition day after day is more heterogeneous. The base for the good handling includes the appropriate intervention of the different stages of an integral administration of residues, which include the separation in the source, the gathering, the handling, the use, treatment, final disposition and the institutional organization of the administration. The topic of the dangerous residues generates more expectation. These residues understand from those of pathogen type that are generated in the establishments of health that of hospital attention, until those of combustible, inflammable type, explosive, radio-active, volatile, corrosive, reagent or toxic, associated to numerous industrial processes, common in our countries in development

  14. Geochemical investigations into the retention of reactive carbon compounds for toxic heavy metals. Final report; Geochemische Untersuchungen zur Retention von reaktiven Kohlenstoffverbindungen fuer toxische Schwermetalle. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Kupsch, H.; Mansel, A.; Crustewitz, C.

    2003-03-01

    The composition, reactivity and stability of reactive organic carbon compounds adsorbed on geogenic matrices was investigated. The surface deposits of NOM and its dependence on geochemical parameters was investigated in selected geomatrices. The retention of toxic heavy metals on these surface deposits of NOM was investigated in consideration of the presence of hydroxy species and inorganic ligands. The investigations of the reactivity of the NOM species requires analyses of these compounds and of the heavy metals in the ultratracer region. This was possible by means of radiochemical methods that were further developed in the context of this project. Radioactive labeling of identified reactive carbon compounds, e.g. with radioactive iodine, on the one hand, and the use of radioactive Cu, Pb, Hg isotopes on the other hand enabled speciation analyses in the binary systems (heavy metal + geomatrix, heavy metal + reactive carbon compounds, reactive carbon compounds + geomatrix) and especially in the ternary system (heavy metal + geomatrix + reactive carbon compounds) in defined conditions. The special labelling techniques were a precondition for distribution measurements in the near-natural, low concentration range. (orig.) [German] Ziel des Projektes war es, mit der vorhandenen Analytik und Expertise die Zusammensetzung, die Reaktivitaet und die Stabilitaet der auf den geogenen Matrizes sorbierten reaktiven organischen Kohlenstoffverbindungen und die damit verbundenen Stoffumsaetze aufzuklaeren. An ausgewaehlten Geomatrizes wurde die Ausbildung von Oberflaechendepositen des NOM und deren Abhaengigkeit gegenueber geochemischen Parametern untersucht. Unter der Beruecksichtigung der Gegenwart von Hydroxyspezies und anorganischen Liganden wurde die Retention toxischer Schwermetalle an diesen Oberflaechendepositen des NOM untersucht. Die Untersuchungen zur Reaktivitaet der NOM-Spezies setzt eine Analytik dieser Verbindungen und der Schwermetalle im Ultraspurenbereich

  15. Possibilities for exposure reduction in computed tomography examination of acute chest pain; Moeglichkeiten der Dosisreduktion bei CT-Untersuchungen des akuten Thoraxschmerzes

    Energy Technology Data Exchange (ETDEWEB)

    Becker, H.C. [Klinikum der Ludwig-Maximilians-Universitaet Muenchen, Campus Grosshadern, Institut fuer Klinische Radiologie, Muenchen (Germany)

    2012-10-15

    Electrocardiogram-gated (ECG) computed tomography (CT) investigations can be accompanied by high amounts of radiation exposure. This is particularly true for the investigation of patients with unclear and acute chest pain. The common approach in patients with acute chest pain is standard spiral CT of the chest. The chest pain or triple-rule-out CT protocol is a relatively new ECG-gated protocol of the entire chest. This article reviews and discusses different techniques for the CT investigation of patients with acute chest pain. By applying the appropriate scan technique, the radiation exposure for an ECG-gated protocol must not necessarily be higher than a standard chest CT scan Aortic pathologies are far better depicted by ECG-gated scan protocols and depending on the heart rate coronary artery disease can also be detected at the same time. The use of ECG-triggered scans will not support the diagnostics of the pulmonary arteries. However, in unspecific chest pain an ECG-triggered scan protocol can provide information on the differential diagnosis. (orig.) [German] EKG-getriggerte CT-Untersuchungen koennen mit einer relativ hohen Strahlenexposition einhergehen. Dies gilt im besonderen Masse fuer die Untersuchung des gesamten Thorax bei Patienten mit unklarem akutem Thoraxschmerz. Bisher wurden Untersuchungen bei Patienten mit akutem Thoraxschmerz in Spiraltechnik ohne EKG-Triggerung durchgefuehrt. Das ''Chest-pain-'' oder ''Triple-rule-out''-Protokoll ist ein neues EKG-getriggertes Untersuchungsprotokoll des gesamten Thorax. Im vorliegenden Artikel werden verschiedene Techniken zur CT-Untersuchung von Patienten mit akutem Thoraxschmerz vorgestellt und besprochen. Mit der richtigen Untersuchungstechnik muss die Strahlenexposition fuer ein EKG-getriggertes Untersuchungsprotokoll nicht hoeher sein als eine Standarduntersuchung ohne EKG. Mit einem EKG-getriggerten Untersuchungsprotokoll laesst sich die Aorta in Hinblick auf

  16. Characterization of Hospital Residuals

    International Nuclear Information System (INIS)

    Blanco Meza, A.; Bonilla Jimenez, S.

    1997-01-01

    The main objective of this investigation is the characterization of the solid residuals. A description of the handling of the liquid and gassy waste generated in hospitals is also given, identifying the source where they originate. To achieve the proposed objective the work was divided in three stages: The first one was the planning and the coordination with each hospital center, in this way, to determine the schedule of gathering of the waste can be possible. In the second stage a fieldwork was made; it consisted in gathering the quantitative and qualitative information of the general state of the handling of residuals. In the third and last stage, the information previously obtained was organized to express the results as the production rate per day by bed, generation of solid residuals for sampled services, type of solid residuals and density of the same ones. With the obtained results, approaches are settled down to either determine design parameters for final disposition whether for incineration, trituration, sanitary filler or recycling of some materials, and storage politics of the solid residuals that allow to determine the gathering frequency. The study concludes that it is necessary to improve the conditions of the residuals handling in some aspects, to provide the cleaning personnel of the equipment for gathering disposition and of security, minimum to carry out this work efficiently, and to maintain a control of all the dangerous waste, like sharp or polluted materials. In this way, an appreciable reduction is guaranteed in the impact on the atmosphere. (Author) [es

  17. Management of NORM Residues

    International Nuclear Information System (INIS)

    2013-06-01

    The IAEA attaches great importance to the dissemination of information that can assist Member States in the development, implementation, maintenance and continuous improvement of systems, programmes and activities that support the nuclear fuel cycle and nuclear applications, and that address the legacy of past practices and accidents. However, radioactive residues are found not only in nuclear fuel cycle activities, but also in a range of other industrial activities, including: - Mining and milling of metalliferous and non-metallic ores; - Production of non-nuclear fuels, including coal, oil and gas; - Extraction and purification of water (e.g. in the generation of geothermal energy, as drinking and industrial process water; in paper and pulp manufacturing processes); - Production of industrial minerals, including phosphate, clay and building materials; - Use of radionuclides, such as thorium, for properties other than their radioactivity. Naturally occurring radioactive material (NORM) may lead to exposures at some stage of these processes and in the use or reuse of products, residues or wastes. Several IAEA publications address NORM issues with a special focus on some of the more relevant industrial operations. This publication attempts to provide guidance on managing residues arising from different NORM type industries, and on pertinent residue management strategies and technologies, to help Member States gain perspectives on the management of NORM residues

  18. Electron microscopy and phase analysis of biofilms of bacterial cultures from hydrogeothermal water; Elektronenmikroskopische und phasenanalytische Untersuchungen an Biofilm von Bakterienkulturen aus geothermisch genutzten Tiefenwaessern

    Energy Technology Data Exchange (ETDEWEB)

    Koehler, M; Voelsgen, F; Bochning, S [URST Umwelt- und Rohstoff-Technologie, Greifswald (Germany); Kasbohm, J [Greifswald Univ. (Germany). FR Geowissenschaften

    1997-12-01

    In the context of a BMBF-funded project (1994 - 1996), concentrations and behaviour of microorganisms in hydrogeothermal water in Mecklenburg-Vorpommern were investigated. About 50 bacterial strains were isolated and characterized with respect to their cell morphology and relevant physiological properties. A relationship was found between bacterial cells and precipitation products. However, the methods of investigation could not differentiate between biogenic (biochemical) and chemical precipitation products, although the bacterial activity seems to be correlated with the precipitation of organic material. (orig.) [Deutsch] Im Rahmen eines vom BMBF geforderten Projektes (1994 - 1996) wurde das Vorkommen und Verhalten von Mikroorganismen in geothermisch genutzen Tiefenwaessern Mecklenburg-Vorpommerns untersucht. Bisher wurden ca. 50 Bakterienstaemme isoliert und hinsichtlich Zellmorphologie sowie relevanter physiologischer Eigenschaften charakterisiert. Mit den durchgefuehrten Untersuchungen konnte eine unmittelbare Beziehung zwischen Bakterienzellen und Faellungsprodukten nachgewiesen werden. Anhand der verwendeten Untersuchungsmethoden ist jedoch eine eindeutige Differenzierung zwischen biogenen (biochemischen) und rein chemischen Faellungsprodukten nicht moeglich. Offenbar bestehen aber eindeutige Beziehungen zwischen Bakterientaetigkeit und der Ausfaellung organischen Materials. (orig.)

  19. Mineralogical investigations of the role of the clay fraction in geothermal energy use; Mineralogische Untersuchungen zur Rolle der Tonfraktion bei der Gewinnung geothermischer Energie

    Energy Technology Data Exchange (ETDEWEB)

    Althaus, E; Frosch, G [Karlsruhe Univ. (T.H.) (Germany). Mineralogisches Inst.

    1997-12-01

    Authigenic clay minerals strongly influence the quality of geothermal reservoir systems. Their precipitation may drastically change the properties of reservoir sandstones. They interact more strongly with non-equilibrium fluids than most other mineral phases. The most abundant clay minerals in geothermal wells of Northeastern Germany are kaolinite, illite and mixed-layer minerals. Experiments are being carried out to study the dissolution rates of these minerals in NaCl brines at different pH-values. (orig.) [Deutsch] Im Rahmen des BMBF-Projektes `Evaluierung geowissenschaftlicher und wirtschaftlicher Bedingungen fuer die Nutzung hydrogeothermaler Ressourcen` werden am Mineralogischen Institut der Universitaet Karlsruhe (T.H.) Experimente zur Stabilitaet von Tonmineralen in geothermischen Systemen durchgefuehrt. Die Untersuchungen beziehen sich auf Gesteine und Solen, wie sie durch die nordostdeutschen Geothermiebohrungen Neustadt-Glewe, Rheinsberg und Neubrandenburg aufgeschlossen sind. Die Untersuchten Gesteinsproben enstammen der oberen Trias und dem Jura. Die vergleichbaren stratigraphischen Einheiten sind in den Bohrungen in unterschiedlicher Teufe und Maechtigkeit anzutreffen: So finden sich die Contorta-Schichten (Raetkeuper) bei Neustadt-Glewe in ca. 2200 m, bei Rheinsberg in ca. 1680 m und bei Neubrandenburg in ca. 1250 m Tiefe. (orig.)

  20. Investigation of the warm prestress effect by X-ray and microfractographic measurements; Roentgenografische und mikrofraktografische Untersuchungen zum Warmvorbeanspruchungs (WPS) - Effekt

    Energy Technology Data Exchange (ETDEWEB)

    Blumenauer, H.; Eichler, B.; Krempe, M.; Ude, J. [Magdeburg Univ. (Germany). Inst. fuer Werkstofftechnik und Werkstoffpruefung

    1998-11-01

    The work reported was to investigate the changes caused at the crack tip of a specimen with incipient crack and to assess their effects with regard to component fracture. The steels selected for testing are the pressure vessel steels 10MnMoNi5-5 and 17MoV8-4, and the experiments were made with CT-25 specimens. The conclusion drawn from the results obtained is that the WPS effect is due to a stronger energy dissipation in the prestressed area ahead of the crack tip, assisted by intrinsic stress-induced crack closing. (orig./CB) [Deutsch] Das Ziel dieser Arbeit ist es, die durch eine Vorbeanspruchung angerissener Proben hervorgerufenen Veraenderungen an der Rissspitze und ihre Auswirkungen auf das Bruchverhalten zu untersuchen. Die Untersuchungen wurden an den Druckbehaelterstaehlen 10MnMoNi5-5 und 17MoV8-4 durchgefuehrt. Die Versuche wurden an CT-25-Proben durchgefuehrt. Die Autoren kommen zum Schluss, dass der WPS-Effekt mit einer staerkeren Energiedissipation in der vorgeschaedigten Prozesszone vor der Rissspitze, unterstuetzt durch eigenspannungsbedingtes Rissschliessen, erklaert werden kann. (orig./MM)

  1. Working memory in volunteers and schizophrenics using BOLD fMRI; Das Arbeitsgedaechtnis bei Gesunden und bei Schizophrenen: Untersuchungen mit BOLD-fMRT

    Energy Technology Data Exchange (ETDEWEB)

    Giesel, F.L. [Deutsches Krebsforschungszentrum (DKFZ) Heidelberg, Abteilung Radiologie (Germany); Deutsches Krebsforschungszentrum (DKFZ), Abteilung Radiologie, Heidelberg (Germany); Hohmann, N. [Deutsches Krebsforschungszentrum (DKFZ) Heidelberg, Abteilung Radiologie (Germany); Psychiatrische Universitaetsklinik Heidelberg, Sektion Gerontopsychiatrie (Germany); Seidl, U.; Kress, K.R.; Schoenknecht, P.; Schroeder, J. [Psychiatrische Universitaetsklinik Heidelberg, Sektion Gerontopsychiatrie (Germany); Kauczor, H.-U.; Essig, M. [Deutsches Krebsforschungszentrum (DKFZ) Heidelberg, Abteilung Radiologie (Germany)

    2005-02-01

    Functional magnetic resonance imaging uses the blood oxygen level-dependent effect (BOLD MRI) for noninvasive display of cerebral correlatives of cognitive function. The importance for the understanding of physiological and pathological processes is demonstrated by investigations of working memory in schizophrenics and healthy controls. Working memory is involved in processing rather than storage of information and therefore is linked to complex processes such as learning and problem solving. In schizophrenic psychosis, these functions are clearly restricted. Training effects in the working memory task follow an inverse U-shape function, suggesting that cerebral activation reaches a peak before economics of the brain find a more efficient method and activation decreases. (orig.) [German] Die funktionelle Magnetresonanztomographie (fMRT) nutzt den ''blood oxygen level dependent effect'' (BOLD-Effekt) zur nichtinvasiven Darstellung zerebraler Korrelate kognitiver Funktionen. Die Bedeutung dieses Verfahrens fuer das Verstaendnis physiologischer und pathologischer Prozesse wird anhand von Untersuchungen zum Arbeitsgedaechtnis bei Schizophrenen und gesunden Kontrollpersonen verdeutlicht. Das Arbeitsgedaechtnis dient weniger der Speicherung, sondern vielmehr der Verarbeitung von Informationen und ist deshalb in komplexe Prozesse wie Lernen und Problemloesen eingebunden. Im Rahmen schizophrener Psychosen kommt es zu einer deutlichen Einschraenkung dieser Funktionen. Erwartungsgemaess zeigen sich unter Durchfuehrung eines Arbeitsgedaechtnisparadigmas Unterschiede in der zerebralen Aktivitaet, die jedoch bei den Erkrankten unter Therapie prinzipiell reversibel sind. Von Interesse sind auch Trainingseffekte bei Gesunden, wobei eine verminderte Aktivierung nach Training auf eine ''Oekonomisierung'' schliessen laesst. (orig.)

  2. Residual-stress measurements

    Energy Technology Data Exchange (ETDEWEB)

    Ezeilo, A N; Webster, G A [Imperial College, London (United Kingdom); Webster, P J [Salford Univ. (United Kingdom)

    1997-04-01

    Because neutrons can penetrate distances of up to 50 mm in most engineering materials, this makes them unique for establishing residual-stress distributions non-destructively. D1A is particularly suited for through-surface measurements as it does not suffer from instrumental surface aberrations commonly found on multidetector instruments, while D20 is best for fast internal-strain scanning. Two examples for residual-stress measurements in a shot-peened material, and in a weld are presented to demonstrate the attractive features of both instruments. (author).

  3. Designing with residual materials

    NARCIS (Netherlands)

    Walhout, W.; Wever, R.; Blom, E.; Addink-Dölle, L.; Tempelman, E.

    2013-01-01

    Many entrepreneurial businesses have attempted to create value based on the residual material streams of third parties. Based on ‘waste’ materials they designed products, around which they built their company. Such activities have the potential to yield sustainable products. Many of such companies

  4. Alexandru Popa, Untersuchungen zu den römisch-barbarischen Kontakten Östlich der römischen Provinz Dacia Antiquitatis reihe 3 Abhnadlungen zur vor-und frühgeschichte, zur klassichen und provinzial-römischen archäologie und zur geschichte des altertum

    Directory of Open Access Journals (Sweden)

    Vasile Iarmulschi

    2016-06-01

    Full Text Available Review on book - Alexandru Popa, Untersuchungen zu den römisch-barbarischen Kontakten Östlich der römischen Provinz Dacia Antiquitatis reihe 3 Abhnadlungen zur vor-und frühgeschichte, zur klassichen und provinzial-römischen archäologie und zur geschichte des altertum

  5. Evaluation of residue-residue contact predictions in CASP9

    KAUST Repository

    Monastyrskyy, Bohdan; Fidelis, Krzysztof; Tramontano, Anna; Kryshtafovych, Andriy

    2011-01-01

    This work presents the results of the assessment of the intramolecular residue-residue contact predictions submitted to CASP9. The methodology for the assessment does not differ from that used in previous CASPs, with two basic evaluation measures

  6. Sharing Residual Liability

    DEFF Research Database (Denmark)

    Carbonara, Emanuela; Guerra, Alice; Parisi, Francesco

    2016-01-01

    Economic models of tort law evaluate the efficiency of liability rules in terms of care and activity levels. A liability regime is optimal when it creates incentives to maximize the value of risky activities net of accident and precaution costs. The allocation of primary and residual liability...... for policy makers and courts in awarding damages in a large number of real-world accident cases....

  7. DRUCKFLAMM - Investigation on combustion and hot gas cleanup in pulverized coal combustion systems. Final report; DRUCKFLAMM - Untersuchungen zur Verbrennung und Heissgasreinigung bei der Druckkohlenstaubfeuerung. Schlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Hein, K.R.G.; Benoehr, A.; Schuermann, H.; Stroehle, J.; Klaiber, C.; Kuhn, R.; Maier, J.; Schnell, U.; Unterberger, S.

    2001-07-01

    facility of the Technical University of Aachen. (orig.) [German] Die Bestrebungen einer effizienten und schadstoffarmen Energieversorgung fuehrten bei der Kohleverbrennung zur Entwicklung von kohlebasierten Kombikraftwerken, die im Vergleich zum konventionellen Kondensationskraftwerk eine deutliche Anhebung des Nettowirkungsgrades erlauben. Eines der Kombikraftwerkskonzepte auf Kohlebasis stellt die Druckkohlenstaubfeuerung dar, die gegenueber den anderen Konzepten das hoechste Wirkungsgradpotential aufweist. Das Ziel dieses Forschungsvorhabens war die Gewinnung gesicherter Erkenntnisse hinsichtlich des Feuerungsverhaltens von Kohle in einer Druckkohlenstaubfeuerung. Es wurden an einem Druckflugstromreaktor detaillierte Untersuchungen zur Brennstoffumsetzung und zum Partikelverhalten, zur Schadstoffbildung und zum Werkstoffverhalten unter Bedingungen der Druckkohlenstaubfeuerung durchgefuehrt. Im Laufe des Forschungsvorhabens wurden einige neue Messtechniken eingesetzt und teilweise auch angeschafft, wie zum Beispiel ein Zwei- Farb-Pyrometer zur simultanen Erfassung von Partikeloberflaechentemperatur und Partikeldurchmesser von brennenden Brennstoffpartikeln. Parallel zu den experimentellen Untersuchungen wurde an der Erarbeitung neuer Berechnungsmodelle gearbeitet, um eine spaetere Feuerraumsimulation fuer ein verbessertes Scale-Up zu ermoeglichen. Die am Druckflugstromreaktor gewonnenen Ergebnisse zeigen, dass der erhoehte Systemdruck sich auf sehr viele Verbrennungsmechanismen stark auswirkt, so konnte eine schnellere Brennstoffumsetzung und gleichzeitig verminderte Stickoxid- und Alkaligasemission nachgewiesen werden. Die Werkstoffuntersuchungen zeigten, dass die aufgrund der sehr hohen Verbrennungstemperaturen benoetigten Keramikwerkstoffe sehr empfindlich gegenueber Verschlackung und schnellen Temperaturwechseln sind, weshalb hinsichtlich der benoetigten Standzeiten in einer zu realisierenden Druckbrennkammer noch erheblicher Entwicklungsbedarf besteht. Hinsichtlich

  8. Numerical investigations on the influence of wind shear and turbulence on aircraft trailing vortices; Numerische Untersuchungen zum Einfluss von Windscherung und Turbulenz auf Flugzeugwirbelschleppen

    Energy Technology Data Exchange (ETDEWEB)

    Hofbauer, T.

    2003-07-01

    In several aspects, the behaviour of aircraft wake vortices under situations of vertical wind shear is significantly different from non-shear scenarios and its operational real-time forcast is challenging. By means of numerical investigations of idealized scenarios, the influence of wind shear on the lateral and vertical transport of vortices is analysed both, phenomenologically as well as in the scope of a sensitivity study. The results allow for the verification of controversial views and the benchmark of modelling approaches. Case studies of turbulent shear flows focus on the persistence of vortices. A detailed analysis of the flow fields evidence that unequal vortex decay rates can be attributed to the asymmetric distribution of secondary vorticity structures. The results moreover suggest that extended vortex lifespans can be expected under situations of wind shear. The unusual vortex behaviour observed by means of a LIDAR measurement is reproduced by realistic simulations and permits to reveal potential causes. (orig.) [German] Das Wirbelschleppenverhalten unterscheidet sich in Situationen vertikaler Windscherung in mehrfacher Hinsicht signifikant von scherungsfreien Szenarien und stellt eine besondere Herausforderung fuer eine operationelle Echtzeitvorhersage dar. Mittels numerischer Untersuchungen idealisierter Szenarien wird zunaechst der Einfluss von Windscherung auf den lateralen und vertikalen Wirbeltransport sowohl phaenomenologisch als auch quantitativ im Rahmen einer Sensitivitaetsstudie analysiert. Anhand der gewonnenen Ergebnisse werden auseinandergehende Erklaerungsansaetze geprueft und Modellierungsansaetze bewertet. Fallstudien turbulenter Scherstroemungen zur Wirbelpersistenz stellen einen weiteren Schwerpunkt dieser Arbeit dar. Durch die ausfuehrliche Analyse der Stroemungsfelder wird der Nachweis erbracht, dass sich unterschiedliche Zerfallsraten der Wirbel auf die asymmetrische Verteilung von sekundaeren Vorticity-Strukturen zurueckfuehren

  9. Studies on the microbial sulphur cycle in acid ponds in the Niederlausitz mining region in Brandenburg; Untersuchungen zum mikrobiellen Schwefelkreislauf in sauren Tagebau-Restseen der Niederlausitz (Brandenburg)

    Energy Technology Data Exchange (ETDEWEB)

    Meier, J

    2001-07-01

    The water quality of the acid ponds in the Niederlausitz brown coal mining region is characterised by pH values below 3 and high concentrations of dissolved iron (up to 10 mM) and sulphate (up to 30 mM). The development of these ponds is determined by the equilibrium that arises between acidifying and alkalinising processes. Acidity develops through weathering and oxidation of iron sulphides in the mining refuse, whereas alkalinity arises through the reduction of iron (III) and sulphate in the pond sediments, a process associated with the oxidation of organic matter. The purpose of the present study was to examine the influence of sulphate reduction and sulphur oxidation on the neutralising potential of the sediments in acid ponds and to characterise and identify the microorganisms involved in these processes. Comparative explorations were performed in two acid waters, namely ponds 111 and 107, and in a neutral water, namely pond B, in a semi-natural area of the Niederlausitz region. [German] Die Wasserqualitaet der sauren Bergbau-Restseen im Braunkohlerevier der Niederlausitz ist durch pH-Werte unter pH 3 und hohe Konzentrationen an geloestem Eisen (bis zu 10 mM) und Sulfat (bis zu 30 mM) gekennzeichnet. Die Entwicklung der Restseen wird durch das Gleichgewicht von aziditaets- und alkalinitaetsbildenden Prozessen bestimmt. Aziditaet entsteht bei der Verwitterung bzw. der Oxidation der Eisensulfide im Kippmassiv, waehrend Alkalinitaet bei der an die Oxidation organischer Substanz gekoppelte Reduktion von Eisen(III) und Sulfat in den Sedimenten der Seen gebildet wird. In der vorliegenden Arbeit wurde der Einfluss der Sulfratreduktion und der Schwefeloxidation auf das Neutralisierungspotenzial der Sedimente der sauren Restseen untersucht sowie die an diesen Prozessen beteiligten Mikroorganismen charakterisiert und identifiziert. Vergleichende Untersuchungen wurden in zwei sauren, Restsee 111 und 107, und in einem neutralen Gewaesser, Restsee B, im naturnahen Bereich

  10. Machine for compacting solid residues

    International Nuclear Information System (INIS)

    Herzog, J.

    1981-11-01

    Machine for compacting solid residues, particularly bulky radioactive residues, constituted of a horizontally actuated punch and a fixed compression anvil, in which the residues are first compacted horizontally and then vertically. Its salient characteristic is that the punch and the compression anvil have embossments on the compression side and interpenetrating plates in the compression position [fr

  11. Quadratic residues and non-residues selected topics

    CERN Document Server

    Wright, Steve

    2016-01-01

    This book offers an account of the classical theory of quadratic residues and non-residues with the goal of using that theory as a lens through which to view the development of some of the fundamental methods employed in modern elementary, algebraic, and analytic number theory. The first three chapters present some basic facts and the history of quadratic residues and non-residues and discuss various proofs of the Law of Quadratic Reciprosity in depth, with an emphasis on the six proofs that Gauss published. The remaining seven chapters explore some interesting applications of the Law of Quadratic Reciprocity, prove some results concerning the distribution and arithmetic structure of quadratic residues and non-residues, provide a detailed proof of Dirichlet’s Class-Number Formula, and discuss the question of whether quadratic residues are randomly distributed. The text is a valuable resource for graduate and advanced undergraduate students as well as for mathematicians interested in number theory.

  12. Review of preliminary results of the project `Co-cracking of plastics and petroleum residues`; Uebersicht zu den ersten Ergebnissen des Projektes Cocracking von Kunststoffen und Erdoelrueckstand

    Energy Technology Data Exchange (ETDEWEB)

    Uhmann, R; Koepsel, R F; Kuchling, T; Simanjenkov, V [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Energieverfahrenstechnik und Chemieingenieurwesen

    1998-09-01

    Coprocessing of petroleum residues and plastics is a promising technology, although some problems concerning waste plastics must be clarified prior to its implementation. In general, it can be stated that with a careful choice of operating parameter combinations, oil yields will be higher than for thermal treatment of petroleum residues alone (e.g. a 35% yield increase is achieved by adding 25% of plastics, which is a disproportionately high increase). Waste plastics thus become a valuable material for processing. (orig.) [Deutsch] Das untersuchte Coprocessing von VR und Kunststoffen ist ein erfolgversprechender Weg der Kunststoffverwertung und des tiefen Crackens von Erdoelrueckstand. Die Klaerung der mit Altkunststoffen verbundenen Fragen bedarf weiterer Untersuchungen. Allgemein kann festgestellt werden, dass bei entsprechenden Parameterkombinationen bessere Oelausbeuten erzielt werden als bei der thermischen Behandlung von reinem VR. Ein Beispiel dafuer ist in der Abbildung 10 dargestellt. Durch eine 25%-ige Erhoehung der Einsatzstoffmasse durch Kunststoffzugabe wird eine im Vergleich zu reinem VR um ca. 36% hoehere Oelausbeute erzielt, was einer ueberproportionalen Erhoehung entspricht. Altkunststoff wird bei diesem Prozess unter Nutzung des Wasserstoff-potentials von Polymeren zu einem wertvollen Einsatzstoff. (orig.)

  13. Bioenergy from sisal residues

    Energy Technology Data Exchange (ETDEWEB)

    Jungersen, G. [Dansk Teknologisk Inst. (Denmark); Kivaisi, A.; Rubindamayugi, M. [Univ. of Dar es Salaam (Tanzania, United Republic of)

    1998-05-01

    The main objectives of this report are: To analyse the bioenergy potential of the Tanzanian agro-industries, with special emphasis on the Sisal industry, the largest producer of agro-industrial residues in Tanzania; and to upgrade the human capacity and research potential of the Applied Microbiology Unit at the University of Dar es Salaam, in order to ensure a scientific and technological support for future operation and implementation of biogas facilities and anaerobic water treatment systems. The experimental work on sisal residues contains the following issues: Optimal reactor set-up and performance; Pre-treatment methods for treatment of fibre fraction in order to increase the methane yield; Evaluation of the requirement for nutrient addition; Evaluation of the potential for bioethanol production from sisal bulbs. The processing of sisal leaves into dry fibres (decortication) has traditionally been done by the wet processing method, which consumes considerable quantities of water and produces large quantities of waste water. The Tanzania Sisal Authority (TSA) is now developing a dry decortication method, which consumes less water and produces a waste product with 12-15% TS, which is feasible for treatment in CSTR systems (Continously Stirred Tank Reactors). (EG)

  14. Investigations performed on the compost worm Eisenia fetida and selected species of earthworms concerning the intake of HCB and pyrene with the goal of deriving a bioaccumulation test; Untersuchungen zur Aufnahme von HCB und Pyren durch den Kompostwurm Eisenia fetida und ausgewaehlte Regenwurmwildarten. Ableitung eines Bioakkumulationstests

    Energy Technology Data Exchange (ETDEWEB)

    Vespermann, A.; Riepert, F.; Pflugmacher, J. [Biologische Bundesanstalt fuer Land- und Forstwirtschaft, Inst. fuer Oekotoxikologie im Pflanzenschutz, Berlin (Germany)

    2003-07-01

    The man issues of the studies described were the validation of a test design for the assessment of the bioaccumulation potential of environmental pollutants and the applicability of Eisenia fetida as a model-organism and artificial soil (OECD) as a standard test substrate. The test organisms used were E. fetida of our own breeding stock and Allolobophora caliginosa, Allolobophora chlorotica, Allolobophora longa and Lumbricus rubellus sampled from a field site. Test soils used were the artificial soil (OECD) and a BBA field soil. Soils were each contaminated with 10 mg HCB and Pyrene per soil dry-weight. Within the test period of 4 weeks, samples were taken weekly for residue analysis in the worms and soils. Bioaccumulation factors (AF) calculated for E. fetida and the free-living species were in the range of 10-17 (HCB) and 0.9-1.7 (Pyrene) depending on the soil used. By re-calculation of the concentrations in soil to concentrations in soil water, the resulting bioconcentration factors are compared with published BCF values determined from QSAR's of other worm species and fresh water fish. It could be concluded that the existing earthworm tests (OECD 1984, ISO 1998) represent an appropriate design for testing the bioconcentration potential of chemicals in soil. (orig.) [German] Ziel der beschriebenen Untersuchungen war die praktische Ueberpruefung eines Methodenentwurfs zur Erfassung der Bioakkumulation von Umweltchemikalien mit Eisenia fetida, der Eignung von E. fetida als Modellorganismus und des OECD-Kunstbodens als Standardsubstrat. Als Testorganismen wurden aus eigener Zucht der Kompostwurm Eisenia fetida und nach Feldentnahme Allolobophora caliginosa, Allolobophora chlorotica, Allolobophora longa und Lumbricus rubellus eingesetzt. Testboeden waren der OECD-Kunstboden und ein Boden vom Versuchsfeld der BBA in Berlin-Dahlem. Beiden Boeden wurden die Testsubstanzen Hexachlorbenzol und Pyren in einer Konzentration von 10 mg/kg Bodentrockengewicht zugemischt

  15. Air quality III - experiments on emission and sensory perception of olfactory substances from ventilation systems. Final report; Luftqualitaet III - Experimentelle Untersuchungen zur Emission und Wahrnehmung von Geruchsstoffen aus Lueftungsgeraeten. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Fitzner, K.; Boettcher, O.

    2001-08-01

    Room air quality is highly important in Germany as people living here will spend 90 percent of their lives inside rooms. Air quality is defined to a large extent via the nose. This research project, in continuation of AiF 10525, involved investigations of materials and components of space HVAC systems with varying air temperatures, humidities and air flow rates for a subjective assessment of the air quality. The main goals were the definition of laws for identification of odorants and the derivation of laws for calculating pollutant-level-dependent ambient air rates for mechanically ventilated rooms. The experiments showed that both adsorption and desorption had a significant part in the addition of odorangs, causing deviations between theoretical and experimental values of felt air quality. The temperature and the relative humidity had an effect as well. Most measurements were made near the olfactory threshold, so that a number of participants were unable to complete the test. Later investigations will rely on analytical methods in addition to test persons. (orig.) [German] Das Thema der Luftqualitaet in Innenraeumen hat in Deutschland grosse Bedeutung, da sich die Bevoelkerung zu 90 Prozent ihres Lebens in Innenraeumen aufhaelt. Die Behaglichkeit der Atemluft wird in grossem Masse durch die mit der Nase wahrgenommenen Bestandteile der Luft beeinflusst. In Fortsetzung zum Forschungsvorhaben AiF 10525 wurden in diesem Forschungsvorhaben Untersuchungen mit Materialien und Komponenten aus RLT-Anlagen unter Veraenderung von Lufttemperatur, Luftfeuchte und Luftgeschwindigkeit zur subjektiven Beurteilung der Luftqualitaet durchgefuehrt. Die Hauptziele dieser Untersuchungen waren das Auffinden der Gesetzmaessigkeiten zur Wahrnehmung von Geruchsstoffen und das Ableiten von Rechenregeln zur Bestimmung verunreinigungslastabhaengiger Aussenluftraten fuer maschinell belueftete Raeume. Die Versuche zeigten, dass Adsorption und Desorption bei der Addition von Geruchsstoffen

  16. Experimental investigations on inlet flow of ducted turbines. A contribution to turbine intake optimization; Experimentelle Untersuchungen zur Anstroemung von Rohrturbinen. Ein Beitrag zur Optimierung des Turbineneinlaufes

    Energy Technology Data Exchange (ETDEWEB)

    Godde, D. [Technische Univ. Muenchen, Obernach (Germany). Versuchsanstalt fuer Wasserbau und Wasserwirtschaft (Oskar-von-Miller-Institut)

    1994-12-31

    erfuellen, die in allgemeiner Form auch in zahlreichen Veroeffentlichungen formuliert sind. Im Rahmen der vorliegenden Arbeit konzentrieren sich die neuen Untersuchungen auf diesem Gebiet - an einem Modell und an einem Versuchskraftwerk - auf den Trennpfeiler, den Rechen und die anschliessende Verziehung im Einlaufbereich von Rohrturbinen. Die Untersuchungsergebnisse klaeren nun einige Zusammenhaenge, widersprechen teilweise bisherigen Annahmen oder bestaetigen sie und relativieren manche der Anforderungen. Die Ergebnisse sind zwar unter Beachtung der modelleigenen Restriktionen und der Charakteristik der verwendeten Turbine zu werten, besitzen jedoch auf Grund des Untersuchungsumfangs bis zu einem gewissen Grad Allgemeingueltigkeit. (AKF)

  17. Immobilization of acid digestion residue

    International Nuclear Information System (INIS)

    Greenhalgh, W.O.; Allen, C.R.

    1983-01-01

    Acid digestion treatment of nuclear waste is similar to incineration processes and results in the bulk of the waste being reduced in volume and weight to some residual solids termed residue. The residue is composed of various dispersible solid materials and typically contains the resultant radioactivity from the waste. This report describes the immobilization of the residue in portland cement, borosilicate glass, and some other waste forms. Diagrams showing the cement and glass virtification parameters are included in the report as well as process steps and candidate waste product forms. Cement immobilization is simplest and probably least expensive; glass vitrification exhibits the best overall volume reduction ratio

  18. Evaluation of residue-residue contact predictions in CASP9

    KAUST Repository

    Monastyrskyy, Bohdan

    2011-01-01

    This work presents the results of the assessment of the intramolecular residue-residue contact predictions submitted to CASP9. The methodology for the assessment does not differ from that used in previous CASPs, with two basic evaluation measures being the precision in recognizing contacts and the difference between the distribution of distances in the subset of predicted contact pairs versus all pairs of residues in the structure. The emphasis is placed on the prediction of long-range contacts (i.e., contacts between residues separated by at least 24 residues along sequence) in target proteins that cannot be easily modeled by homology. Although there is considerable activity in the field, the current analysis reports no discernable progress since CASP8.

  19. Investigations on ion-beam induced desorption from cryogenic surfaces; Untersuchungen zu ionenstrahlinduzierter Desorption von kryogenen Oberflaechen

    Energy Technology Data Exchange (ETDEWEB)

    Maurer, Christoph

    2017-07-03

    A central component of FAIR, the Facility for Antiproton and Ion Research, will be the superconducting heavy ion synchrotron SIS100, which is supposed to provide reliable, high intensity beams for various applications. Its beam intensity is governed by the space charge limit, while the maximum energy is determined by the machine's magnetic rigidity. That means, ions with higher charge state can be accelerated to a higher energy, but with less intensity. For highest intensity beams, intermediate charge states have to be used instead of high charge state ions. This alleviates the issue of space charge but gives rise to dynamic vacuum effects, which also limit beam intensity: beam particles collide with residual gas particles, which leads to charge exchange and their subsequent loss. Impacting on the chamber wall, these ions release adsorbed gas particles. This process is called desorption and leads to a localized increase in pressure, which in turn causes more charge exchange. After a few rounds of self amplification, this can lead to total beam loss. This ''runaway-desorption'' is typically the main beam intensity limiting process for intermediate charge state (heavy) ion beams. The extent of this phenomenon is governed by two factors: the initial beam intensity and the desorption yield. The latter is examined within the scope of this thesis. Special emphasis is placed on the influence of the target's temperature, since the SIS100 will be a superconducting machine with cryogenic vacuum chamber walls. In order to investigate this topic, an experimental setup has been devised, built at the SIS18 and taken into commission. Based on the experience gained during operation, it has been continuously improved and extended. Another central innovation presented in this thesis is the use of gas dynamics simulations for an improved method of data analysis. Using this technique, environmental conditions like the chamber geometry and the connected

  20. Erosion behaviour of ultrathin carbon layers and hydrogen retention in beryllium; Untersuchungen zur Erosion ultraduenner Kohlenstoffschichten und Wasserstoffrueckhaltung in Beryllium

    Energy Technology Data Exchange (ETDEWEB)

    Reinelt, Matthias

    2008-04-16

    Plasma-wall-interaction plays an important role on the way to technical feasibility of thermonuclear fusion. In this context, the erosion behavior of few nanometer thin amorphous carbon layers on different metallic substrates by energetic deuterium and helium ions is investigated. Several aspects of the interaction are distinguishable by XPS. Ion induced carbide formation is governed by kinematic intermixing of carbon and metal substrate. Several methods of quantification of XPS measurements are developed and discussed. Comparison of results from these methods with NRA measurements show that surface roughness and implantation of particles into the carbon layer and intermixing zone influence the XPS measurements, which are sensitive to parameters such as material density. The retention of 1 keV deuterium ions implanted into single crystalline and cleaned beryllium at room temperature is investigated by temperature programmed desorption (TPD). The residual BeO coverage was 0.2 ML. The retention is 78% at low fluences and saturates above a bombardment with a fluence of 2.10{sup 17} cm{sup -2}. The retained maximum areal density is 2.10{sup 17} cm{sup -2}. Above 900 K, no deuterium is retained in the sample. An onset of self diffusion is observed at this temperature and metallic beryllium from the bulk segregates though thin BeO layers on the surface. From deuterium desorption traces, retention mechanisms are obtained. The measured TPDspectra are modeled by TMAP7 and rate equations to obtain activation energies for the release processes. From these, binding energies for the system Be-D are derived. Up to a implantation fluence of 1.10{sup 17} cm{sup -2}, deuterium is trapped in ion induced defects in the beryllium lattice with binding energies of 1.69 eV and 1.86 eV and release temperatures of 770 K and 840 K, respectively. The occupation of these states shows a different isotope behavior for {sup 1}H and {sup 2}H. The states are filled by diffusion of deuterium at the

  1. Landfilling of waste incineration residues

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund; Astrup, Thomas; Cai, Zuansi

    2002-01-01

    Residues from waste incineration are bottom ashes and air-pollution-control (APC) residues including fly ashes. The leaching of heavy metals and salts from the ashes is substantial and a wide spectrum of leaching tests and corresponding criteria have been introduced to regulate the landfilling...

  2. Statistical inference on residual life

    CERN Document Server

    Jeong, Jong-Hyeon

    2014-01-01

    This is a monograph on the concept of residual life, which is an alternative summary measure of time-to-event data, or survival data. The mean residual life has been used for many years under the name of life expectancy, so it is a natural concept for summarizing survival or reliability data. It is also more interpretable than the popular hazard function, especially for communications between patients and physicians regarding the efficacy of a new drug in the medical field. This book reviews existing statistical methods to infer the residual life distribution. The review and comparison includes existing inference methods for mean and median, or quantile, residual life analysis through medical data examples. The concept of the residual life is also extended to competing risks analysis. The targeted audience includes biostatisticians, graduate students, and PhD (bio)statisticians. Knowledge in survival analysis at an introductory graduate level is advisable prior to reading this book.

  3. Residual stress by repair welds

    International Nuclear Information System (INIS)

    Mochizuki, Masahito; Toyoda, Masao

    2003-01-01

    Residual stress by repair welds is computed using the thermal elastic-plastic analysis with phase-transformation effect. Coupling phenomena of temperature, microstructure, and stress-strain fields are simulated in the finite-element analysis. Weld bond of a plate butt-welded joint is gouged and then deposited by weld metal in repair process. Heat source is synchronously moved with the deposition of the finite-element as the weld deposition. Microstructure is considered by using CCT diagram and the transformation behavior in the repair weld is also simulated. The effects of initial stress, heat input, and weld length on residual stress distribution are studied from the organic results of numerical analysis. Initial residual stress before repair weld has no influence on the residual stress after repair treatment near weld metal, because the initial stress near weld metal releases due to high temperature of repair weld and then stress by repair weld regenerates. Heat input has an effect for residual stress distribution, for not its magnitude but distribution zone. Weld length should be considered reducing the magnitude of residual stress in the edge of weld bead; short bead induces high tensile residual stress. (author)

  4. RESIDUAL RISK ASSESSMENT: ETHYLENE OXIDE ...

    Science.gov (United States)

    This document describes the residual risk assessment for the Ethylene Oxide Commercial Sterilization source category. For stationary sources, section 112 (f) of the Clean Air Act requires EPA to assess risks to human health and the environment following implementation of technology-based control standards. If these technology-based control standards do not provide an ample margin of safety, then EPA is required to promulgate addtional standards. This document describes the methodology and results of the residual risk assessment performed for the Ethylene Oxide Commercial Sterilization source category. The results of this analyiss will assist EPA in determining whether a residual risk rule for this source category is appropriate.

  5. Investigations on the chemical composition of the organic fraction of tropospheric aerosols. Final report; Untersuchungen zur chemischen Zusammensetzung der organischen Komponente des troposphaerischen Aerosols. AFS-Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Hoffmann, T.; Warscheid, B.

    2000-07-01

    ] Obwohl das Wissen um die Bedeutung von luftgetragenen Partikeln fuer die Strahlungsbilanz der Atmosphaere in den letzten Jahren zugenommen hat, sind eine Reihe von wichtigen Aerosolbildungsmechanismen bisher nur unzureichend untersucht worden. Dies gilt insbesondere fuer Aerosole, die aus fluechtigen organischen Vorlaeufern natuerlichen wie auch antrophogenen Ursprungs im Verlauf von troposphaerischen Oxidationsprozessen gebildet werden. Das Vorhaben umfasste daher die Entwicklung massenspektrometrischer Methoden fuer qualitative wie auch fuer quantitative Studien zur chemischen Zusammensetzung von sekundaeren organischen Aerosolen (SOA), insbesondere gebildet aus der Ozonolyse von Monoterpenen (z.B. {alpha}-Pinen, {beta}-Pinen, Sabinen, {delta}{sup 3}-Caren, Limonen). Mit Hilfe eines entwickelten On-line APCI-ITMS-Systems (atmospheric pressure chemical ionisation, APCI) konnte die Bildung von Gas- und Partikelphasenprodukten in Echtzeit (Zeitaufloesung {proportional_to}1 s) als Folge der Monoterpen-Ozonolyse beobachtet werden. Die Nachweisgrenze der Methode liegt bei ca. 100 ppt(v/v) im positiven Ionenmodus. Basierend auf der Entwicklung geeigneter Standardadditionsmethoden erfolgte auch die unmittelbare Quantifizierung ausgewaehlter Oxidationsprodukte in der Gas- und Partikelphase. Mittels isotopenmarkiertem Wasser (H{sub 2}{sup 18}O) wurden darueber hinaus einige zugrundeliegende Reaktionsmechanismen aufgedeckt. Ein weiterer Teil des Projektes konzentrierte sich auf die Charakterisierung insbesondere der schwerfluechtigen Aerosolkomponenten der Monoterpen-Ozonolyse mittels MS/MS-Studien. Diese Studien ergaben, dass eine Reihe von multifunktionellen Carbonsaeureprodukte signifikante Aerosolbestandteile repraesentieren (Dicarbonsaeuren, Oxocarbonsaeuren, Hydroxycarbonsaeuren etc.). Schliesslich ergaben die massenspektrometrischen Untersuchungen deutliche Hinweise auf starke intermolekulare Wechselwirkungen zwischen den einzelnen Produkten (Assoziatbildung). Da ausserdem

  6. Examination of the somatostatin receptor status in non-medullary thyroid cancer; Untersuchungen zum Somatostatinrezeptor-Status bei nicht-medullaeren Schilddruesenkarzinomen

    Energy Technology Data Exchange (ETDEWEB)

    Goerges, R.; Brandt-Mainz, K.; Bockisch, A. [Essen Univ. (Gesamthochschule) (Germany). Klinik und Poliklinik fuer Nuklearmedizin; Kahaly, G. [Mainz Univ. (Germany). Klinik und Poliklinik fuer Medizin - Endokrinologie und Stoffwechselerkrankungen; Mueller-Brand, J.; Maecke, H. [Kantonsspital Basel (Switzerland). Inst. fuer Nuklearmedizin; Walgenbach, S. [Mainz Univ. (Germany). Klinik und Poliklinik fuer Allgemein- und Abdominalchirurgie; Bruns, C. [Praeklinische Forschung Novartis, Basel (Switzerland); Andreas, J. [Universitaetsklinik Mainz (Germany). Klinik und Poliklinik fuer Nuklearmedizin

    1999-06-01

    Aim: Recent in-vitro and in-vivo studies demonstrated a somatostatin receptor expression in some non-medullary thyroid carcinomas. In this study we investigated the somatostatin receptor status for this particular tumor entity in a larger patient group. Subject and methods: We compared 131-iodine with 111-In-pentetreotide scans in 24 patients with metastasizing, non-medullary thyroid cancer. The findings were correlated with other imaging modalities. Additionally, we performed receptor autoradiography in one patient, octreotide therapy in another patient and administration of 90-Y- and 111-In-DOTATOC in 2 consecutive patients. Results: In the 15 patients with papillary or follicular carcinoma, 111-In-pentetreotide was inferior to 131-I in 8/15, equal in 1/15, and superior in 6/15 patients. In 8/9 of the patients with Huerthle cell cacinoma, metastases showed a 111-In-pentetreotide accumulation of various intensity, while 131-iodine scans were negative except for one patient. 111-In-pentetreotide was equal or superior compared to 201-Tl or 99m-Tc-sestamibi, but for the most part inferior in comparison with 18-F-FDG-PET. The findings of 111-In-pentetreotide scintigraphy correlated well with the receptor autoradiography and the accumulation of DOTATOC, but not with the therapeutic effect of `cold` octreotide on the thyroid cancer metastases. Conclusions: Several metastases of papillary and follicular carcinoma, and the majority of Huerthle cell cancer metastases can express somatostatin receptors. 111-In-pentetreotide scintigraphy is a promising tool for localization of metastases especially in Huerthle cell cancer or if PET is not available, and may be useful for selection of possible candidates, if therapeutic effective {beta}-emitting somatostatin analogues will be available for routine application. (orig.) [Deutsch] Ziel: in aktuellen In-vitro und In-vivo-Untersuchungen wurde eine Somatostatinrezeptor-Expression bei einigen nicht

  7. Nitrogen availability of biogas residues

    Energy Technology Data Exchange (ETDEWEB)

    El-Sayed Fouda, Sara

    2011-09-07

    The objectives of this study were to characterize biogas residues either unseparated or separated into a liquid and a solid phase from the fermentation of different substrates with respect to their N and C content. In addition, short and long term effects of the application of these biogas residues on the N availability and N utilization by ryegrass was investigated. It is concluded that unseparated or liquid separated biogas residues provide N at least corresponding to their ammonium content and that after the first fertilizer application the C{sub org}:N{sub org} ratio of the biogas residues was a crucial factor for the N availability. After long term application, the organic N accumulated in the soil leads to an increased release of N.

  8. Vesícula residual

    Directory of Open Access Journals (Sweden)

    Júlio C. U. Coelho

    Full Text Available Our objective is to report three patients with recurrent severe upper abdominal pain secondary to residual gallbladder. All patients had been subjected to cholecystectomy from 1 to 20 years before. The diagnosis was established after several episodes of severe upper abdominal pain by imaging exams: ultrasonography, tomography, or endoscopic retrograde cholangiography. Removal of the residual gallbladder led to complete resolution of symptoms. Partial removal of the gallbladder is a very rare cause of postcholecystectomy symptoms.

  9. Residual number processing in dyscalculia ?

    OpenAIRE

    Cappelletti, Marinella; Price, Cathy J.

    2013-01-01

    Developmental dyscalculia – a congenital learning disability in understanding numerical concepts – is typically associated with parietal lobe abnormality. However, people with dyscalculia often retain some residual numerical abilities, reported in studies that otherwise focused on abnormalities in the dyscalculic brain. Here we took a different perspective by focusing on brain regions that support residual number processing in dyscalculia. All participants accurately performed semantic and ca...

  10. Americium recovery from reduction residues

    Science.gov (United States)

    Conner, W.V.; Proctor, S.G.

    1973-12-25

    A process for separation and recovery of americium values from container or bomb'' reduction residues comprising dissolving the residues in a suitable acid, adjusting the hydrogen ion concentration to a desired level by adding a base, precipitating the americium as americium oxalate by adding oxalic acid, digesting the solution, separating the precipitate, and thereafter calcining the americium oxalate precipitate to form americium oxide. (Official Gazette)

  11. Evaluation of residue-residue contact prediction in CASP10

    KAUST Repository

    Monastyrskyy, Bohdan

    2013-08-31

    We present the results of the assessment of the intramolecular residue-residue contact predictions from 26 prediction groups participating in the 10th round of the CASP experiment. The most recently developed direct coupling analysis methods did not take part in the experiment likely because they require a very deep sequence alignment not available for any of the 114 CASP10 targets. The performance of contact prediction methods was evaluated with the measures used in previous CASPs (i.e., prediction accuracy and the difference between the distribution of the predicted contacts and that of all pairs of residues in the target protein), as well as new measures, such as the Matthews correlation coefficient, the area under the precision-recall curve and the ranks of the first correctly and incorrectly predicted contact. We also evaluated the ability to detect interdomain contacts and tested whether the difficulty of predicting contacts depends upon the protein length and the depth of the family sequence alignment. The analyses were carried out on the target domains for which structural homologs did not exist or were difficult to identify. The evaluation was performed for all types of contacts (short, medium, and long-range), with emphasis placed on long-range contacts, i.e. those involving residues separated by at least 24 residues along the sequence. The assessment suggests that the best CASP10 contact prediction methods perform at approximately the same level, and comparably to those participating in CASP9.

  12. Untersuchungen zur Entwicklung von Satellitengalaxien

    Science.gov (United States)

    Seidel, Björn

    2002-01-01

    Gleichgewichtsmodelle ein- und zweikomponentiger Satellitengalaxien werden erzeugt und die Gezeiteneinwirkungen der als starres äußeres Potential angenommenen Milchstraße auf sie betrachtet. Eine erste Reihe von Simulationen mit anfänglich kugelsymmetrischen einkomponentigen Satelliten zeigt, daß sich nach elliptischer Deformation ein Balken und Schweife ungleicher Länge ausbilden, deren Aussehen sich periodisch ändert. Mithilfe von Vergleichssimulationen wurden folgende Phänomene am Satelliten entdeckt: (1) Hochdichtebereiche in den Schweifen, (2) Niedrigdichtebereiche um den Kern bzw. Balken und (3) ein oft verdeckter Balken. Analysiert wird das Erscheinungsbild in Zeitabhängigkeit. Die Teilchen gehen dem Kern über den Balken verloren und bewegen sich entlang gewisser stets gleich aussehender charakteristischer Strukturen in die Schweife. Nach einer Herleitung allgemeiner Größen des mehrkomponentigen Kingprofils werden drei stabile Standardmodelle zweikomponentiger Satellitengalaxien mit Massenverhältnis 1:10 (baryonische zu dunkle Materie) und unterschiedlicher Verteilung der dunklen und sichtbaren Materie gefunden. Ohne die Allgemeinheit der Ergebnisse zu beeinträchtigen, wurde dabei die Große Magellanische Wolke als Grundlage der Modelle genommen. Nach geeigneter Wahl der Bahn, zu der der Gezeitenradius des verwendeten dreikomponentigen Milchstraßenpotentials sowohl analytisch als auch numerisch berechnet wird, werden Simulationen der Modelle analysiert. Hauptaugenmerk ist das unterschiedliche Verhalten der Komponenten. Hauptergebnisse: (1) Es ist möglich, große Anteile dunkler, jedoch nur geringe sichtbarer Materie abzulösen. Dunkle und sichtbare Materie können unterschiedliche morphologische Strukturen bilden. (2) Je nach Konzentration der Komponenten ist die Eigengravitation der Teilchen mehr oder weniger für das Aussehen bestimmend. (3) Die Kernauflösung des Satelliten findet im Perigalaktikum (PG), sein Zerfall aber erst im Apogalaktikum statt. (4) Die Geschwindigkeitsdispersionen der Komponenten im Kern sind im PG entlang der Sichtlinie kurzzeitig stark erhöht, sie fallen ebenso wie die Dichten und deren Verhältnis mit jedem PG stufenförmig ab; einiges davon sind nur Projektionseffekte. (5) Der radiale Verlauf der Geschwindigkeitsdispersion ist vom Bahnort abhängig er wurde genau untersucht. (6) Der Satellit zerfällt über einen Kreislauf aus Massenverlust, flacher werdendem Potential und kleiner werdendem Gezeitenradius. Equilibrium models of one- and two-component satellite galaxies are created. The tidal influence of the Milky Way, which is modeled as a rigid external potential, is examined. A first set of simulations adopting originally spherically-symmetric, one-component satellites show that after elliptical deformation, a bar and tails of unequal length arise which change their morphology cyclically. By considering comparative simulations, the following phenomena are discovered: (1) High-density regions in the tails, (2) low-density zones around the core or bar, (3) an often concealed bar. The overall morphology as function of time is analysed. The particles are lost from the core via the bar and move along certain morphologically characteristic structures into the tails. After deducing general quantities of the multi-component King model, three stable standard models of two-component satellite galaxies with different distributions of dark and visible matter are found. These models have a mass ratio of 1:10 for baryonic to dark matter. Without restriction to the universality of the results, the Large Magellanic Cloud was taken as basic prototype for these models. To choose the proper orbits, the tidal radius of the three-component model of the potential of the Galaxy is calculated both analytically and numerically. Then the simulations are analysed with the different behaviour of the components being the main focus of interest. Main results: (1) It is possible to detach a large fraction of dark matter but only a small amount of visible matter. Dark and visible matter may form different morphological structures. (2) Depending on the concentrations of the components, self-gravity may be the decisive factor for determining the morphology. (3) The dissolution of the core of the satellite occurs at perigalacticon (PG), but it does not decay before apogalacticon. (4) At PG the core densities of the components, their ratio and the velocity dispersions fall off in steps, the velocity dispersions along the line of sight show a high narrow peak. Some of these effects are just projection effects. (5) The radial dependence of the velocity dispersion is dependent on the orbital position; it is analysed in detail. (6) The satellite decays through a cycle of mass loss, an increasingly shallow potential and decreasing tidal radius.

  13. Residual stresses around Vickers indents

    International Nuclear Information System (INIS)

    Pajares, A.; Guiberteau, F.; Steinbrech, R.W.

    1995-01-01

    The residual stresses generated by Vickers indentation in brittle materials and their changes due to annealing and surface removal were studied in 4 mol% yttria partially stabilized zirconia (4Y-PSZ). Three experimental methods to gain information about the residual stress field were applied: (i) crack profile measurements based on serial sectioning, (ii) controlled crack propagation in post indentation bending tests and (iii) double indentation tests with smaller secondary indents located around a larger primary impression. Three zones of different residual stress behavior are deduced from the experiments. Beneath the impression a crack free spherical zone of high hydrostatic stresses exists. This core zone is followed by a transition regime where indentation cracks develop but still experience hydrostatic stresses. Finally, in an outward third zone, the crack contour is entirely governed by the tensile residual stress intensity (elastically deformed region). Annealing and surface removal reduce this crack driving stress intensity. The specific changes of the residual stresses due to the post indentation treatments are described and discussed in detail for the three zones

  14. Minimization of zirconium chlorinator residues

    International Nuclear Information System (INIS)

    Green, G.K.; Harbuck, D.D.

    1995-01-01

    Zirconium chlorinator residues contain an array of rare earths, scandium, unreacted coke, and radioactive thorium and radium. Because of the radioactivity, the residues must be disposed in special waste containment facilities. As these sites become more congested, and with stricter environmental regulations, disposal of large volumes of wastes may become more difficult. To reduce the mass of disposed material, the US Bureau of Mines (USBM) developed technology to recover rare earths, thorium and radium, and unreacted coke from these residues. This technology employs an HCl leach to solubilize over 99% of the scandium and thorium, and over 90% of the rare earths. The leach liquor is processed through several solvent extraction stages to selectively recover scandium, thorium, and rare earths. The leach residue is further leached with an organic acid to solubilize radium, thus allowing unreacted coke to be recycled to the chlorinator. The thorium and radium waste products, which comprise only 2.1% of the original residue mass, can then be sent to the radioactive waste facility

  15. Actinide recovery from pyrochemical residues

    International Nuclear Information System (INIS)

    Avens, L.R.; Clifton, D.G.; Vigil, A.R.

    1984-01-01

    A new process for recovery of plutonium and americium from pyrochemical waste has been demonstrated. It is based on chloride solution anion exchange at low acidity, which eliminates corrosive HCl fumes. Developmental experiments of the process flowsheet concentrated on molten salt extraction (MSE) residues and gave >95% plutonium and >90% americium recovery. The recovered plutonium contained 6 = from high chloride-low acid solution. Americium and other metals are washed from the ion exchange column with 1N HNO 3 -4.8M NaCl. The plutonium is recovered, after elution, via hydroxide precipitation, while the americium is recovered via NaHCO 3 precipitation. All filtrates from the process are discardable as low-level contaminated waste. Production-scale experiments are now in progress for MSE residues. Flow sheets for actinide recovery from electrorefining and direct oxide reduction residues are presented and discussed

  16. Actinide recovery from pyrochemical residues

    International Nuclear Information System (INIS)

    Avens, L.R.; Clifton, D.G.; Vigil, A.R.

    1985-05-01

    We demonstrated a new process for recovering plutonium and americium from pyrochemical waste. The method is based on chloride solution anion exchange at low acidity, or acidity that eliminates corrosive HCl fumes. Developmental experiments of the process flow chart concentrated on molten salt extraction (MSE) residues and gave >95% plutonium and >90% americium recovery. The recovered plutonium contained 6 2- from high-chloride low-acid solution. Americium and other metals are washed from the ion exchange column with lN HNO 3 -4.8M NaCl. After elution, plutonium is recovered by hydroxide precipitation, and americium is recovered by NaHCO 3 precipitation. All filtrates from the process can be discardable as low-level contaminated waste. Production-scale experiments are in progress for MSE residues. Flow charts for actinide recovery from electro-refining and direct oxide reduction residues are presented and discussed

  17. Coking of residue hydroprocessing catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Gray, M.R.; Zhao, Y.X. [Alberta Univ., Edmonton, AB (Canada). Dept. of Chemical Engineering; McKnight, C.A. [Syncrude Canada Ltd., Edmonton, AB (Canada); Komar, D.A.; Carruthers, J.D. [Cytec Industries Inc., Stamford, CT (United States)

    1997-11-01

    One of the major causes of deactivation of Ni/Mo and Co/Mo sulfide catalysts for hydroprocessing of heavy petroleum and bitumen fractions is coke deposition. The composition and amount of coke deposited on residue hydroprocessing catalysts depends on the composition of the liquid phase of the reactor. In the Athabasca bitumen, the high molecular weight components encourage coke deposition at temperatures of 430 to 440 degrees C and at pressures of 10 to 20 MPa hydrogen pressure. A study was conducted to determine which components in the heavy residual oil fraction were responsible for coking of catalysts. Seven samples of Athabasca vacuum residue were prepared by supercritical fluid extraction with pentane before being placed in the reactor. Carbon content and hydrodesulfurization activity was measured. It was concluded that the deposition of coke depended on the presence of asphaltenes and not on other compositional variables such as content of nitrogen, aromatic carbon or vanadium.

  18. Leaching From Biomass Gasification Residues

    DEFF Research Database (Denmark)

    Allegrini, Elisa; Boldrin, Alessio; Polletini, A.

    2011-01-01

    The aim of the present work is to attain an overall characterization of solid residues from biomass gasification. Besides the determination of chemical and physical properties, the work was focused on the study of leaching behaviour. Compliance and pH-dependence leaching tests coupled with geoche......The aim of the present work is to attain an overall characterization of solid residues from biomass gasification. Besides the determination of chemical and physical properties, the work was focused on the study of leaching behaviour. Compliance and pH-dependence leaching tests coupled...

  19. Carbaryl residues in maize products

    International Nuclear Information System (INIS)

    Zayed, S.M.A.D.; Mansour, S.A.; Mostafa, I.Y.; Hassan, A.

    1976-01-01

    The 14 C-labelled insecticide carbaryl was synthesized from [1- 14 C]-1-naphthol at a specific activity of 3.18mCig -1 . Maize plants were treated with the labelled insecticide under simulated conditions of agricultural practice. Mature plants were harvested and studied for distribution of total residues in untreated grains as popularly roasted and consumed, and in the corn oil and corn germ products. Total residues found under these conditions in the respective products were 0.2, 0.1, 0.45 and 0.16ppm. (author)

  20. Combinatorial construction of toric residues

    OpenAIRE

    Khetan, Amit; Soprounov, Ivan

    2004-01-01

    The toric residue is a map depending on n+1 semi-ample divisors on a complete toric variety of dimension n. It appears in a variety of contexts such as sparse polynomial systems, mirror symmetry, and GKZ hypergeometric functions. In this paper we investigate the problem of finding an explicit element whose toric residue is equal to one. Such an element is shown to exist if and only if the associated polytopes are essential. We reduce the problem to finding a collection of partitions of the la...

  1. Alternatives to crop residues for soil amendment

    OpenAIRE

    Powell, J.M.; Unger, P.W.

    1997-01-01

    Metadata only record In semiarid agroecosystems, crop residues can provide important benefits of soil and water conservation, nutrient cycling, and improved subsequent crop yields. However, there are frequently multiple competing uses for residues, including animal forage, fuel, and construction material. This chapter discusses the various uses of crop residues and examines alternative soil amendments when crop residues cannot be left on the soil.

  2. Residual Structures in Latent Growth Curve Modeling

    Science.gov (United States)

    Grimm, Kevin J.; Widaman, Keith F.

    2010-01-01

    Several alternatives are available for specifying the residual structure in latent growth curve modeling. Two specifications involve uncorrelated residuals and represent the most commonly used residual structures. The first, building on repeated measures analysis of variance and common specifications in multilevel models, forces residual variances…

  3. Computing Decoupled Residuals for Compact Disc Players

    DEFF Research Database (Denmark)

    Odgaard, Peter Fogh; Stoustrup, Jakob; Andersen, Palle

    2006-01-01

    a pair of residuals generated by Compact Disc Player. However, these residuals depend on the performance of position servos in the Compact Disc Player. In other publications of the same authors a pair of decoupled residuals is derived. However, the computation of these alternative residuals has been...

  4. Managing woodwaste: Yield from residue

    Energy Technology Data Exchange (ETDEWEB)

    Nielson, E. [LNS Services, Inc., North Vancouver, British Columbia (Canada); Rayner, S. [Pacific Waste Energy Inc., Burnaby, British Columbia (Canada)

    1993-12-31

    Historically, the majority of sawmill waste has been burned or buried for the sole purpose of disposal. In most jurisdictions, environmental legislation will prohibit, or render uneconomic, these practices. Many reports have been prepared to describe the forest industry`s residue and its environmental effect; although these help those looking for industry-wide or regional solutions, such as electricity generation, they have limited value for the mill manager, who has the on-hands responsibility for generation and disposal of the waste. If the mill manager can evaluate waste streams and break them down into their usable components, he can find niche market solutions for portions of the plant residue and redirect waste to poor/no-return, rather than disposal-cost, end uses. In the modern mill, residue is collected at the individual machine centre by waste conveyors that combine and mix sawdust, shavings, bark, etc. and send the result to the hog-fuel pile. The mill waste system should be analyzed to determine the measures that can improve the quality of residues and determine the volumes of any particular category before the mixing, mentioned above, occurs. After this analysis, the mill may find a niche market for a portion of its woodwaste.

  5. Residual stress in polyethylene pipes

    Czech Academy of Sciences Publication Activity Database

    Poduška, Jan; Hutař, Pavel; Kučera, J.; Frank, A.; Sadílek, J.; Pinter, G.; Náhlík, Luboš

    2016-01-01

    Roč. 54, SEP (2016), s. 288-295 ISSN 0142-9418 R&D Projects: GA MŠk LM2015069; GA MŠk(CZ) LQ1601 Institutional support: RVO:68081723 Keywords : polyethylene pipe * residual stress * ring slitting method * lifetime estimation Subject RIV: JL - Materials Fatigue, Friction Mechanics Impact factor: 2.464, year: 2016

  6. Solow Residuals Without Capital Stocks

    DEFF Research Database (Denmark)

    Burda, Michael C.; Severgnini, Battista

    2014-01-01

    We use synthetic data generated by a prototypical stochastic growth model to assess the accuracy of the Solow residual (Solow, 1957) as a measure of total factor productivity (TFP) growth when the capital stock in use is measured with error. We propose two alternative measurements based on curren...

  7. Solidification process for sludge residue

    International Nuclear Information System (INIS)

    Pearce, K.L.

    1998-01-01

    This report investigates the solidification process used at 100-N Basin to solidify the N Basin sediment and assesses the N Basin process for application to the K Basin sludge residue material. This report also includes a discussion of a solidification process for stabilizing filters. The solidified matrix must be compatible with the Environmental Remediation Disposal Facility acceptance criteria

  8. Leptogenesis and residual CP symmetry

    International Nuclear Information System (INIS)

    Chen, Peng; Ding, Gui-Jun; King, Stephen F.

    2016-01-01

    We discuss flavour dependent leptogenesis in the framework of lepton flavour models based on discrete flavour and CP symmetries applied to the type-I seesaw model. Working in the flavour basis, we analyse the case of two general residual CP symmetries in the neutrino sector, which corresponds to all possible semi-direct models based on a preserved Z 2 in the neutrino sector, together with a CP symmetry, which constrains the PMNS matrix up to a single free parameter which may be fixed by the reactor angle. We systematically study and classify this case for all possible residual CP symmetries, and show that the R-matrix is tightly constrained up to a single free parameter, with only certain forms being consistent with successful leptogenesis, leading to possible connections between leptogenesis and PMNS parameters. The formalism is completely general in the sense that the two residual CP symmetries could result from any high energy discrete flavour theory which respects any CP symmetry. As a simple example, we apply the formalism to a high energy S 4 flavour symmetry with a generalized CP symmetry, broken to two residual CP symmetries in the neutrino sector, recovering familiar results for PMNS predictions, together with new results for flavour dependent leptogenesis.

  9. Radioactive material in residues of health services residues

    International Nuclear Information System (INIS)

    Costa R, A. Jr.; Recio, J.C.

    2006-01-01

    The work presents the operational actions developed by the one organ responsible regulator for the control of the material use radioactive in Brazil. Starting from the appearance of coming radioactive material of hospitals and clinical with services of nuclear medicine, material that that is picked up and transported in specific trucks for the gathering of residuals of hospital origin, and guided one it manufactures of treatment of residuals of services of health, where they suffer radiological monitoring before to guide them for final deposition in sanitary embankment, in the city of Sao Paulo, Brazil. The appearance of this radioactive material exposes a possible one violation of the norms that govern the procedures and practices in that sector in the country. (Author)

  10. Aquisition of age- and sex-dependent patient data for the calculation of annual radiation exposure in nuclear medicine: a German pilot study; Erfassung alters- und geschlechtsbezogener Daten nuklearmedizinischer Untersuchungen zur Berechnung der jaehrlichen Strahlenexposition in der BRD: Eine Pilotstudie

    Energy Technology Data Exchange (ETDEWEB)

    Schnell-Inderst, P.; Hacker, M.; Weiss, M.; Hahn, K. [Klinik und Poliklinik fuer Nuklearmedizin, Klinikum der Univ. Muenchen (Germany); Nosske, D.; Stamm-Meyer, A.; Brix, G. [Bundesamt fuer Strahlenschutz, Inst. fuer Strahlenhygiene, Neuherberg (Germany)

    2004-04-01

    Aim: a pilote study for estimation of radiation exposure due to diagnostic procedures in nuclear medicine using routine data of hospitals and practices in Germany. Methods: hospitals and practices willing to participate in the study supplied data of one year (1997), containing information on patients' identification number, age, sex, type of diagnostic procedure, radiopharmaceutical, administered activity, type of health insurance (private/public), inpatient/outpatient status, and so-called leistungsziffer, which describes the type of medical performances in Germany. The effective dose per examination was calculated according to ICRP 80. Mean, standard deviation, median, 5{sup th} and 95{sup th} percentiles of the effective dose were calculated, stratified by type of organ system and also by sex and age, including patients of {>=} 18 years. Results: 82 039 examinations from patients of 9 hospitals and practices were analyzed. The median (5-95{sup th} percentiles) of the effective dose per examination for all patients was 2.9 mSv (0.4-8.5 mSv); 1.2 examinations per patient and year were performed on average. The three most frequent examinations were bone scans (median 3.4 mSv; 2.9-5.1), thyroid (0.9 mSv; 0.4-2.2) and cardiovascular studies (7.3 mSv; 3.8-20.2). The median effective dose for 18 to 40 years old women was 1.0 mSv (0.4-5.8), for women between 41 and 65 years 2.2 mSv (0.4-7.3) and for women older than 65 years 2.4 mSv (0.5-7.6). The corresponding values for men were 2.6 mSv (0.3-7.6); 3.3 mSv (0.4-9.1), and 3.4 mSv (0.5-8.8). Conclusion: it was possible to gain an accurate determination of radiation exposure of diagnostic procedures in nuclear medicine by routine data. (orig.) [German] Ziel: Pilotstudie zur Ermittlung der Strahlenexposition in Deutschland bei Untersuchungen in der nuklearmedizinischen Diagnostik anhand von Routinedaten aus Kliniken und Praxen. Methoden: Kliniken und Praxen in Deutschland lieferten 1997 routinemaessig erhobene

  11. Theoretical and experimental investigations of an added firing system in cogeneration processes with gas turbines optimizing flame stability and burnout behaviour; Theoretische und experimentelle Untersuchungen einer Zusatzfeuerung in gasturbinengestuetzten KWK-Prozessen fuer eine Optimierung hinsichtlich Flammenstabilitaet und Ausbrandverhalten

    Energy Technology Data Exchange (ETDEWEB)

    Koesters, M.; Kliemt, C.

    2004-07-01

    The effects of the key flow, mixing and ignition parameters on the ignition process was investigated in near-practical conditions. It was found that the ignition energy can be minimized by careful selection of the electrode configuration and positioning near the burner. Further, a criterion was developed for developing characteristic fields and design specifications for gas burners. The FLUENT code can calculate the mixing, flow and turbulence situation of a burner. This, and plus the newly established ignition criterion, can support the development of characteristic fields and help to minimize the experimental expenditure. [German] Der Einfluss der wichtigsten Stroemungs-, Mischungs- und Zuendparameter auf die Zuendung wurde mit Hilfe gezielter experimenteller und theoretischer Untersuchungen unter industrienahen Bedingungen getestet. Hierbei konnte eine gute Uebereinstimmung zwischen den Messungen und Rechnungen erzielt werden. Die Ergebnisse haben gezeigt, dass durch eine geeignete Wahl der Elektrodenkonfiguration und der Elektrodenpositionierung im Brennernahbereich eine Zuendenergieminimierung erreicht werden kann. Gleichzeitig wurde ein Kriterium entwickelt, das zur Erarbeitung von Kennfeldern und Auslegungsvorschriften fuer Gasbrenner genutzt werden kann. Mit Hilfe des kommerziellen CFD-Programms FLUENT kann die Mischungs-, Stroemungs- und Turbulenzsituation eines Brenners numerisch berechnet werden. Mittels dieser Ergebnisse und unter Anwendung des ermittelten Zuendkriteriums kann die Erstellung von Arbeits- und Zuendkennfeldern fuer die Neuentwicklung bzw. Verbesserung von Industriegasbrennern unterstuetzt und somit der experimentelle Aufwand minimiert werden. (orig.)

  12. The Cauchy method of residues

    CERN Document Server

    Mitrinović, Dragoslav S

    1993-01-01

    Volume 1, i. e. the monograph The Cauchy Method of Residues - Theory and Applications published by D. Reidel Publishing Company in 1984 is the only book that covers all known applications of the calculus of residues. They range from the theory of equations, theory of numbers, matrix analysis, evaluation of real definite integrals, summation of finite and infinite series, expansions of functions into infinite series and products, ordinary and partial differential equations, mathematical and theoretical physics, to the calculus of finite differences and difference equations. The appearance of Volume 1 was acknowledged by the mathematical community. Favourable reviews and many private communications encouraged the authors to continue their work, the result being the present book, Volume 2, a sequel to Volume 1. We mention that Volume 1 is a revised, extended and updated translation of the book Cauchyjev raeun ostataka sa primenama published in Serbian by Nau~na knjiga, Belgrade in 1978, whereas the greater part ...

  13. Calcination/dissolution residue treatment

    International Nuclear Information System (INIS)

    Knight, R.C.; Creed, R.F.; Patello, G.K.; Hollenberg, G.W.; Buehler, M.F.; O'Rourke, S.M.; Visnapuu, A.; McLaughlin, D.F.

    1994-09-01

    Currently, high-level wastes are stored underground in steel-lined tanks at the Hanford site. Current plans call for the chemical pretreatment of these wastes before their immobilization in stable glass waste forms. One candidate pretreatment approach, calcination/dissolution, performs an alkaline fusion of the waste and creates a high-level/low-level partition based on the aqueous solubilities of the components of the product calcine. Literature and laboratory studies were conducted with the goal of finding a residue treatment technology that would decrease the quantity of high-level waste glass required following calcination/dissolution waste processing. Four elements, Fe, Ni, Bi, and U, postulated to be present in the high-level residue fraction were identified as being key to the quantity of high-level glass formed. Laboratory tests of the candidate technologies with simulant high-level residues showed reductive roasting followed by carbonyl volatilization to be successful in removing Fe, Ni, and Bi. Subsequent bench-scale tests on residues from calcination/dissolution processing of genuine Hanford Site tank waste showed Fe was separated with radioelement decontamination factors of 70 to 1,000 times with respect to total alpha activity. Thermodynamic analyses of the calcination of five typical Hanford Site tank waste compositions also were performed. The analyses showed sodium hydroxide to be the sole molten component in the waste calcine and emphasized the requirement for waste blending if fluid calcines are to be achieved. Other calcine phases identified in the thermodynamic analysis indicate the significant thermal reconstitution accomplished in calcination

  14. Residue management at Rocky Flats

    International Nuclear Information System (INIS)

    Olencz, J.

    1995-01-01

    Past plutonium production and manufacturing operations conducted at the Rocky Flats Environmental Technology Site (RFETS) produced a variety of plutonium-contaminated by-product materials. Residues are a category of these materials and were categorized as open-quotes materials in-processclose quotes to be recovered due to their inherent plutonium concentrations. In 1989 all RFETS plutonium production and manufacturing operations were curtailed. This report describes the management of plutonium bearing liquid and solid wastes

  15. Residual life management. Maintenance improvement

    International Nuclear Information System (INIS)

    Sainero Garcia, J.; Hevia Ruperez, F.

    1995-01-01

    The terms Residual Life Management, Life Cycle Management and Long-Term Management are synonymous with a concept which aims to establish efficient maintenance for the profitable and safe operation of a power plant for as long as possible. A Residual Life Management programme comprises a number of stages, of which Maintenance Evaluation focuses on how power plant maintenance practices allow the mitigation and control of component ageing. with this objective in mind, a methodology has been developed for the analysis of potential degradative phenomena acting on critical components in terms of normal power plant maintenance practices. This methodology applied to maintenance evaluation enables the setting out of a maintenance programme based on the Life Management concept, and the programme's subsequent up-dating to allow for new techniques and methods. Initial applications have shown that although, in general terms, power plant maintenance is efficient, the way in which Residual Life Management is approached requires changes in maintenance practices. These changes range from modifications to existing inspection and surveillance methods or the establishment of new ones, to the monitoring of trends or the performance of additional studies, the purpose of which is to provide an accurate evaluation of the condition of the installations and the possibility of life extension. (Author)

  16. Investigations of the metabolism of the hormones ethylen, abscisic acid and indol-3-acetic acid in coniferous trees in forest die-back areas of south western Germany; Untersuchungen zum Haushalt der Hormone Ethylen, Abscisinsaeure und Indol-3-essigsaeure in Nadelbaeumen aus Waldschadensgebieten Suedwestdeutschlands

    Energy Technology Data Exchange (ETDEWEB)

    Christmann, A.

    1993-12-31

    The author investigated changes in the hormone metabolism of affected trees; he intended to analyze as many hormones as possible. The investigations were carried out on needles, owing to the fact that the symptoms observed suggested specific disturbances of the needle hormone metabolism. Further, needles are the main point of attack of airborne pollutants. In physiologically healthy trees, the seasonal changes in hormone levels were investigated as a function of different parameters such as forest site, needle age, tree age, and position of sample branches in the tree crown. On this basis, hormone changes resulting from tree disease were characterized for the sample trees. SO{sub 2} and ozone were taken into account in the investigations. It was found that although the development with time of physiological and structural characteristics suggests premature aging of the needles of affected trees, the changes in the hormone metabolism do not correspond to the hormonal control patterns of natural needle aging. SO-2 exposure or a lack of minerals at the forest site are excluded as causes of the observed damage. No conclusive information could be obtained on the effects of ozone. (orig./MG) [Deutsch] Es war ein Ziel dieser Arbeit, nachzuweisen, welche Veraenderungen im Hormonhaushalt erkrankter Baeume vorliegen und dabei moeglichst viele Hormone zu bearbeiten. Die Untersuchungen wurden an Nadeln durchgefuehrt, da die beobachtbaren Symptome fuer eine Stoerung des Hormonhaushaltes vor allem dieser Organe sprachen und sie zudem Hauptangriffsort fuer Luftschadstoffe sind. An physiologisch gesunden Baeumen wurde das Verhalten der einzelnen Hormone im Jahresverlauf in Abhaengigkeit von verschiedenen Einflussgroessen wie Standort, Nadelalter, Baumalter und Position von Probenaesten innerhalb der Baumkrone erarbeitet. Danach wurden die krankheitsbedingten Veraenderungen im Hormonhaushalt der entsprechenden Versuchsbaeume charakterisiert. Die Schadgase SO{sub 2} und Ozon wurden

  17. Characterisation and management of concrete grinding residuals.

    Science.gov (United States)

    Kluge, Matt; Gupta, Nautasha; Watts, Ben; Chadik, Paul A; Ferraro, Christopher; Townsend, Timothy G

    2018-02-01

    Concrete grinding residue is the waste product resulting from the grinding, cutting, and resurfacing of concrete pavement. Potential beneficial applications for concrete grinding residue include use as a soil amendment and as a construction material, including as an additive to Portland cement concrete. Concrete grinding residue exhibits a high pH, and though not hazardous, it is sufficiently elevated that precautions need to be taken around aquatic ecosystems. Best management practices and state regulations focus on reducing the impact on such aquatic environment. Heavy metals are present in concrete grinding residue, but concentrations are of the same magnitude as typically recycled concrete residuals. The chemical composition of concrete grinding residue makes it a useful product for some soil amendment purposes at appropriate land application rates. The presence of unreacted concrete in concrete grinding residue was examined for potential use as partial replacement of cement in new concrete. Testing of Florida concrete grinding residue revealed no dramatic reactivity or improvement in mortar strength.

  18. FINITE ELEMENT MODEL FOR PREDICTING RESIDUAL ...

    African Journals Online (AJOL)

    FINITE ELEMENT MODEL FOR PREDICTING RESIDUAL STRESSES IN ... the transverse residual stress in the x-direction (σx) had a maximum value of 375MPa ... the finite element method are in fair agreement with the experimental results.

  19. Polychlorinated Biphenyls (PCB) Residue Effects Database

    Data.gov (United States)

    U.S. Environmental Protection Agency — The PCB Residue Effects (PCBRes) Database was developed to assist scientists and risk assessors in correlating PCB and dioxin-like compound residues with toxic...

  20. 9 CFR 311.39 - Biological residues.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Biological residues. 311.39 Section... Biological residues. Carcasses, organs, or other parts of carcasses of livestock shall be condemned if it is determined that they are adulterated because of the presence of any biological residues. ...

  1. Cycling of grain legume residue nitrogen

    DEFF Research Database (Denmark)

    Jensen, E.S.

    1995-01-01

    Symbiotic nitrogen fixation by legumes is the main input of nitrogen in ecological agriculture. The cycling of N-15-labelled mature pea (Pisum sativum L.) residues was studied during three years in small field plots and lysimeters. The residual organic labelled N declined rapidly during the initial...... management methods in order to conserve grain legume residue N sources within the soil-plant system....

  2. Neutron residual stress measurements in linepipe

    International Nuclear Information System (INIS)

    Law, Michael; Gnaepel-Herold, Thomas; Luzin, Vladimir; Bowie, Graham

    2006-01-01

    Residual stresses in gas pipelines are generated by manufacturing and construction processes and may affect the subsequent pipe integrity. In the present work, the residual stresses in eight samples of linepipe were measured by neutron diffraction. Residual stresses changed with some coating processes. This has special implications in understanding and mitigating stress corrosion cracking, a major safety and economic problem in some gas pipelines

  3. Natural radioactivity in petroleum residues

    International Nuclear Information System (INIS)

    Gazineu, M.H.P.; Gazineu, M.H.P.; Hazin, C.A.; Hazin, C.A.

    2006-01-01

    The oil extraction and production industry generates several types of solid and liquid wastes. Scales, sludge and water are typical residues that can be found in such facilities and that can be contaminated with Naturally Occurring Radioactive Material (N.O.R.M.). As a result of oil processing, the natural radionuclides can be concentrated in such residues, forming the so called Technologically Enhanced Naturally Occurring Radioactive Material, or T.E.N.O.R.M.. Most of the radionuclides that appear in oil and gas streams belong to the 238 U and 232 Th natural series, besides 40 K. The present work was developed to determine the radionuclide content of scales and sludge generated during oil extraction and production operations. Emphasis was given to the quantification of 226 Ra, 228 Ra and 40 K since these radionuclides,are responsible for most of the external exposure in such facilities. Samples were taken from the P.E.T.R.O.B.R.A.S. unity in the State of Sergipe, in Northeastern Brazil. They were collected directly from the inner surface of water pipes and storage tanks, or from barrels stored in the waste storage area of the E and P unit. The activity concentrations for 226 Ra, 228 Ra and 40 K were determined by using an HP Ge gamma spectrometric system. The results showed concentrations ranging from 42.7 to 2,110.0 kBq/kg for 226 Ra, 40.5 to 1,550.0 kBq/kg for 228 Ra, and 20.6 to 186.6 kBq/kg for 40 K. The results highlight the importance of determining the activity concentration of those radionuclides in oil residues before deciding whether they should be stored or discarded to the environment. (authors)

  4. Residual Liquefaction under Standing Waves

    DEFF Research Database (Denmark)

    Kirca, V.S. Ozgur; Sumer, B. Mutlu; Fredsøe, Jørgen

    2012-01-01

    This paper summarizes the results of an experimental study which deals with the residual liquefaction of seabed under standing waves. It is shown that the seabed liquefaction under standing waves, although qualitatively similar, exhibits features different from that caused by progressive waves....... The experimental results show that the buildup of pore-water pressure and the resulting liquefaction first starts at the nodal section and spreads towards the antinodal section. The number of waves to cause liquefaction at the nodal section appears to be equal to that experienced in progressive waves for the same...

  5. Process to recycle shredder residue

    Science.gov (United States)

    Jody, Bassam J.; Daniels, Edward J.; Bonsignore, Patrick V.

    2001-01-01

    A system and process for recycling shredder residue, in which separating any polyurethane foam materials are first separated. Then separate a fines fraction of less than about 1/4 inch leaving a plastics-rich fraction. Thereafter, the plastics rich fraction is sequentially contacted with a series of solvents beginning with one or more of hexane or an alcohol to remove automotive fluids; acetone to remove ABS; one or more of EDC, THF or a ketone having a boiling point of not greater than about 125.degree. C. to remove PVC; and one or more of xylene or toluene to remove polypropylene and polyethylene. The solvents are recovered and recycled.

  6. Incineration as a treatment option for shredder light fractions (SLF) by a stationary fluidised bed combustion; Untersuchungen zur Verbrennung von Shredderleichtfraktionen in einer stationaeren Wirbelschicht

    Energy Technology Data Exchange (ETDEWEB)

    Hofmann, Gaston

    2011-07-15

    In this paper the suitability of the stationary fluidised bed combustion as a treatment option for shredder light fractions (SLF) is discussed. This SLF, SLF coarse grain and SLF generated in a further mechanical treatment were burned. The results show a strong change in grain size distribution of the bed material during the combustion the SLF and SLF-coarse fractions. The formation of agglomerates significantly impaired the fluidization. The main reason for this effect is the high content of alkali and alkaline earth metals in the SLF. During the incineration of SLF generated by further mechanical treatment the change in grain size distribution declines much more slowly. This results from the separation of hard plastics with higher calcium contents during further mechanical processing. The tests also showed a complete burnout and a significant enrichment of metals in the solid combustion residues (fabric filter ash bed ash, cyclone ash). These residues represent a recycling concentrate, which needs to be open in the future. (orig.)

  7. Investigations on radionuclide release and on the corrosion behaviour of spent fuels from research reactors under disposal conditions. Final report; Untersuchungen zur Radionuklidfreisetzung und zum Korrosionsverhalten von bestrahltem Kernbrennstoff aus Forschungsreaktoren unter Endlagerbeedingungen. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Bruecher, H.; Curtius, H.; Fachinger, J.; Kaiser, G.; Mazeina, L.; Nau, K.

    2003-12-01

    From the present report 'Untersuchungen zur Radionuklidfreisetzung und zum Korrosionsverhalten von bestrahltem Kernbrennstoff aus Forschungsreaktoren unter Endlagerbedingungen' with the code number FKZ 9108 carried out in the time periode 01.06.1998 till 30.11.2001 the following results can be withdrawn: U/Al-RR-fuel elements corroded slowly in granite water (Grimsel-West) at 90 C under anaerobic conditions. For a complete dissolution of the fuel element a time period of 10{sup 3} years is assumed according to present conservative results. In salt brines, especially in magnesium chloride rich brines the corrosion rate is high. Addition of GGG40 (basic material of the fuel element container with iron as main element) had an acceleration effect. A complete dissolution of the fuel is achieved within a couple of months. Under aerobic and under anaerobic conditions the bulk of released radionuclides were fixed by the corrosion products formed (secondary phases). The actinides were mobilised by variation of the ionic strength of the leaching solution. This process can be explained by phase conversion reactions within the secondary phases. Secondary phases formed by corrosion of a non-irradiated U/Al-RR-fuel element, were analysed and hydrotalcites were identified as phase components. This result justifies the assumption, that hydrotalcites are components of the corrosion products from irradiated fuels. To clarify the questions which bindings exist between radionuclides and secondary phases, sorption experiments were performed. The sorption experiments were performed in salt brines and in granite water using repository relevant radionuclides and minerals which are considered to represent thermodynamic final components of the secondary phases. Pu sorbed as cationic species quantitatively and the binding is covalent. In granite water the same behaviour was found for Am. (orig.) [German] Aus dem vorliegenden Bericht 'Untersuchungen zur Radionuklidfreisetzung

  8. Residual Stresses In 3013 Containers

    International Nuclear Information System (INIS)

    Mickalonis, J.; Dunn, K.

    2009-01-01

    The DOE Complex is packaging plutonium-bearing materials for storage and eventual disposition or disposal. The materials are handled according to the DOE-STD-3013 which outlines general requirements for stabilization, packaging and long-term storage. The storage vessels for the plutonium-bearing materials are termed 3013 containers. Stress corrosion cracking has been identified as a potential container degradation mode and this work determined that the residual stresses in the containers are sufficient to support such cracking. Sections of the 3013 outer, inner, and convenience containers, in both the as-fabricated condition and the closure welded condition, were evaluated per ASTM standard G-36. The standard requires exposure to a boiling magnesium chloride solution, which is an aggressive testing solution. Tests in a less aggressive 40% calcium chloride solution were also conducted. These tests were used to reveal the relative stress corrosion cracking susceptibility of the as fabricated 3013 containers. Significant cracking was observed in all containers in areas near welds and transitions in the container diameter. Stress corrosion cracks developed in both the lid and the body of gas tungsten arc welded and laser closure welded containers. The development of stress corrosion cracks in the as-fabricated and in the closure welded container samples demonstrates that the residual stresses in the 3013 containers are sufficient to support stress corrosion cracking if the environmental conditions inside the containers do not preclude the cracking process.

  9. Residual Fragments after Percutaneous Nephrolithotomy

    Directory of Open Access Journals (Sweden)

    Kaan Özdedeli

    2012-09-01

    Full Text Available Clinically insignificant residual fragments (CIRFs are described as asymptomatic, noninfectious and nonobstructive stone fragments (≤4 mm remaining in the urinary system after the last session of any intervention (ESWL, URS or PCNL for urinary stones. Their insignificance is questionable since CIRFs could eventually become significant, as their presence may result in recurrent stone growth and they may cause pain and infection due to urinary obstruction. They may become the source of persistent infections and a significant portion of the patients will have a stone-related event, requiring auxilliary interventions. CT seems to be the ultimate choice of assessment. Although there is no concensus about the timing, recent data suggests that it may be performed one month after the procedure. However, imaging can be done in the immediate postoperative period, if there are no tubes blurring the assessment. There is some evidence indicating that selective medical therapy may have an impact on decreasing stone formation rates. Retrograde intrarenal surgery, with its minimally invasive nature, seems to be the best way to deal with residual fragments.

  10. Residual number processing in dyscalculia.

    Science.gov (United States)

    Cappelletti, Marinella; Price, Cathy J

    2014-01-01

    Developmental dyscalculia - a congenital learning disability in understanding numerical concepts - is typically associated with parietal lobe abnormality. However, people with dyscalculia often retain some residual numerical abilities, reported in studies that otherwise focused on abnormalities in the dyscalculic brain. Here we took a different perspective by focusing on brain regions that support residual number processing in dyscalculia. All participants accurately performed semantic and categorical colour-decision tasks with numerical and non-numerical stimuli, with adults with dyscalculia performing slower than controls in the number semantic tasks only. Structural imaging showed less grey-matter volume in the right parietal cortex in people with dyscalculia relative to controls. Functional MRI showed that accurate number semantic judgements were maintained by parietal and inferior frontal activations that were common to adults with dyscalculia and controls, with higher activation for participants with dyscalculia than controls in the right superior frontal cortex and the left inferior frontal sulcus. Enhanced activation in these frontal areas was driven by people with dyscalculia who made faster rather than slower numerical decisions; however, activation could not be accounted for by response times per se, because it was greater for fast relative to slow dyscalculics but not greater for fast controls relative to slow dyscalculics. In conclusion, our results reveal two frontal brain regions that support efficient number processing in dyscalculia.

  11. Residual number processing in dyscalculia

    Directory of Open Access Journals (Sweden)

    Marinella Cappelletti

    2014-01-01

    Full Text Available Developmental dyscalculia – a congenital learning disability in understanding numerical concepts – is typically associated with parietal lobe abnormality. However, people with dyscalculia often retain some residual numerical abilities, reported in studies that otherwise focused on abnormalities in the dyscalculic brain. Here we took a different perspective by focusing on brain regions that support residual number processing in dyscalculia. All participants accurately performed semantic and categorical colour-decision tasks with numerical and non-numerical stimuli, with adults with dyscalculia performing slower than controls in the number semantic tasks only. Structural imaging showed less grey-matter volume in the right parietal cortex in people with dyscalculia relative to controls. Functional MRI showed that accurate number semantic judgements were maintained by parietal and inferior frontal activations that were common to adults with dyscalculia and controls, with higher activation for participants with dyscalculia than controls in the right superior frontal cortex and the left inferior frontal sulcus. Enhanced activation in these frontal areas was driven by people with dyscalculia who made faster rather than slower numerical decisions; however, activation could not be accounted for by response times per se, because it was greater for fast relative to slow dyscalculics but not greater for fast controls relative to slow dyscalculics. In conclusion, our results reveal two frontal brain regions that support efficient number processing in dyscalculia.

  12. Residual number processing in dyscalculia☆

    Science.gov (United States)

    Cappelletti, Marinella; Price, Cathy J.

    2013-01-01

    Developmental dyscalculia – a congenital learning disability in understanding numerical concepts – is typically associated with parietal lobe abnormality. However, people with dyscalculia often retain some residual numerical abilities, reported in studies that otherwise focused on abnormalities in the dyscalculic brain. Here we took a different perspective by focusing on brain regions that support residual number processing in dyscalculia. All participants accurately performed semantic and categorical colour-decision tasks with numerical and non-numerical stimuli, with adults with dyscalculia performing slower than controls in the number semantic tasks only. Structural imaging showed less grey-matter volume in the right parietal cortex in people with dyscalculia relative to controls. Functional MRI showed that accurate number semantic judgements were maintained by parietal and inferior frontal activations that were common to adults with dyscalculia and controls, with higher activation for participants with dyscalculia than controls in the right superior frontal cortex and the left inferior frontal sulcus. Enhanced activation in these frontal areas was driven by people with dyscalculia who made faster rather than slower numerical decisions; however, activation could not be accounted for by response times per se, because it was greater for fast relative to slow dyscalculics but not greater for fast controls relative to slow dyscalculics. In conclusion, our results reveal two frontal brain regions that support efficient number processing in dyscalculia. PMID:24266008

  13. Wind power project. Investigation of the habitat use of selected native small game species in the vicinity of wind power systems. Final report; Projekt Windkraftanlagen. Untersuchungen zur Raumnutzung ausgewaehlter heimischer Niederwildarten im Bereich von Windkraftanlagen. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Pohlmeyer, K.; Menzel, C.

    2001-04-01

    Acting on behalf of the State Hunting Association of Lower Saxony the Game Research Institute (IWFo) of Hannover Veterinary University carried out a three-year study from April 1998 through March 2001 on the habitat use of selected native small game species in the vicinity of aerogenerators. This final report depicts the animals' preferred places, use of agricultural land, avoidance radius, if any, their activities and exposure to predator pressure. The target species were roe deer, hare, red fox, partridge and carrion crow. The study was carried out in Lower Saxony and Bremen on a total study area of 22.3 km{sup 2}, comprising four areas with running aerogenerators and five control areas without an aerogenerator. All parameters were studied in terms of a comparison between aerogenerator and control areas. The objective was to identify differences in population, use of space and habitat and in behaviour. [German] Am Institut fuer Wildtierforschung an der Tieraerztlichen Hochschule Hannover (IWFo) wurde im Auftrag der Landesjaegerschaft Niedersachsen (LJN) in einer dreijaehrigen Studie von April 1998 bis Maerz 2001 die Raumnutzung ausgewaehlter heimischer Niederwildarten im Bereich von Windkraftanlagen (WKA) untersucht. Im Weiteren wurden Aufenthaltspraeferenzen, Nutzung der landwirtschaftlichen Flaechen, moegliche Naeherungslimits und Aktivitaeten der Wildarten sowie der Beutegreiferdruck dargestellt. Zielarten der Studie waren Rehwild, Feldhase, Rotfuchs, Rebhuhn und Rabenkraehen. Die Untersuchungen wurden in vier Gebieten mit in Betrieb befindlichen WKA sowie in fuenf Referenzgebieten ohne WKA in Niedersachsen und Bremen auf einer Flaeche von insgesamt 22,3 km{sup 2} durchgefuehrt. Alle Parameter wurden vergleichend fuer die WKA- und Referenzgebiete betrachtet. Moegliche Unterschiede im Besatz bzw. Bestand, in Raum- und Habitatnutzung sowie im Verhalten wurden herausgearbeitet. (orig.)

  14. Chemical-physical studies on SO{sub 2} deposition on rock samples and other absorber surfaces; Chemisch-physikalische Untersuchungen zur Deposition von Schwefeldioxid auf Gesteinsproben und anderen Absorberoberflaechen

    Energy Technology Data Exchange (ETDEWEB)

    Wiese, U.

    2000-07-01

    Stone and other surfaces are still corroded by dry-deposited sulphur dioxide, although the present concentration is in the lower ppbv range. In this work experiments were conducted to separate and assign the different resistances during the deposition process at concentrations of SO{sub 2} found in the environment today. To compare surfaces with different reactivities, the varying uptake and the resulting SO{sub 2} concentration over the surface has to be concerned. Therefore a test chamber has been developed that allows the SO{sub 2} concentration to keep constant independent of the SO{sub 2} uptake. Different stones and passive samplers were investigated in this chamber, scanning a wide range of humidity and concentration that has not been studied before. The passive sampler was also studied in a closed wind tunnel with a sulphur dioxide containing atmosphere. It has been found that the deposition velocity is increasing with decreasing SO{sub 2} concentration for all stone types. (orig.) [German] Alle technischen Oberflaechen unterliegen Alterungsprozessen. Atmosphaerische Schadgase wie Schwefeldioxid tragen zur Korrosion dieser Oberflaechen in erheblichem Umfang bei. Auch wenn insbesondere die Konzentration an SO{sub 2} in der Aussenluft in den letzten Jahren in den unteren ppbV-Bereich gesunken ist, so ist der Anteil und die Potenz dieses Gases am Zerfallsprozess von Natursteinen aufgrund seiner guten Wasserloeslichkeit und der Saeurestaerke noch immer sehr hoch. Dennoch finden sich in der Literatur kaum zuverlaessige Daten ueber die Schwefeldioxid-Aufnahme verschiedener Natursteinvarietaeten. Insbesondere mangelt es an systematischen Untersuchungen der verschiedenen, den SO{sub 2}-Depositionsprozess bestimmenden Faktoren. Ziel dieser Arbeit war es, einen wesentlichen Beitrag zur Schliessung dieser Luecken zu leisten. Dazu wurde ein Messsystem zur Untersuchung verschiedenartiger Gesteinsproben im Labor konzipiert und in Betrieb genommen. (orig.)

  15. Multitracer studies for determining seepage water and anion movement in four types of soil using lysimeters with different functions and designs; Multitracer-Untersuchungen zur Bestimmung der Sickerwasser- und Anionenbewegung in vier Bodenformen bei Lysimetern unterschiedlicher Nutzung und Bauart

    Energy Technology Data Exchange (ETDEWEB)

    Knappe, S.; Russow, R. [UFZ - Umweltforschungszentrum Leipzig-Halle GmbH, Bad Lauchstaedt (Germany). Sektion Bodenforschung; Seeger, J. [Lysimeterstation Falkenberg (Germany)

    1999-02-01

    Lysimeter experiments based on the stable isotope tracer technique are a suitable means of examining the complex relationships governing water and material transport processes in the soil. The present paper reports on experiments in which water and nitrate movement was traced directly by means of lysimeters placed at different depths and using deuterium water and [{sup 15}N]N-nitrate for pulse marking. Extensive investigations carried out during the dissection of soil monoliths that had been used for many years in lysimeters offered an opportunity for stable isotope tracer studies aimed at determining seepage water and anion movement in undisturbed soils and, after dismantling the lysimeters, conducting soil analyses to find out more about the fate of nonpercolated tracers at various soil depths. Following other authors, bromide anions were additionally used as conservative tracers. [Deutsch] Zur Untersuchung der komplexen Zusammenhaenge des Wasser- und Stofftransportes im Boden bieten sich Lysimeterversuche unter Nutzung der stabilisotopen Tracertechnik an. In der vorliegenden Arbeit wird zunaechst ueber die direkte Verfolgung der Wasser- und Nitrat-Bewegung in tiefengestaffelten Lysimetern durch Pulsmarkierung mit Deuteriumwasser und [{sup 15}N]Nitrat berichtet. Im Rahmen von umfangreichen Untersuchungen bei der Zerlegung von langjaehrig in Lysimetern genutzten Bodenmonolithen bestand des weiteren die Moeglichkeit, stabilisotope Traceruntersuchungen zur Bestimmung der Sickerwasser- und Anionenbewegung an ungestoerten Boeden durchzufuehren und nach der Zerlegung der Lysimeter ueber entsprechende Analysen des Bodens Aussagen zum Verbleib der nicht perkolierten Tracer in verschiedenen Bodentiefen zu treffen. Zusaetzlich wurde dabei das von anderen Autoren bereits genutzte Bromid-Anion als sogenannter konservativer Tracer eingesetzt. (orig.)

  16. Environmental medicine field studies in the Bitterfeld and Hettstedt districts and in a control district. 1992-1994. Data book; Umweltmedizinische Untersuchungen im Raum Bitterfeld, im Raum Hettstedt und einem Vergleichsgebiet. 1992-1994. Data Book

    Energy Technology Data Exchange (ETDEWEB)

    Heinrich, J; Popescu, M; Wjst, M; Trepka, M J; Cyrys, J; Wichmann, H E

    1995-03-01

    For the purpose of establishing an inventory of environmental medicine data for the eastern Lands of Germany (of the former GDR), field studies have been carried out in the strongly polluted districts of Bitterfeld and Hettstedt and in a low-pollution control district, around Zerbst. The data were intended to reveal the environmental pollution level in various districts and regions, and to indicate regions of priority for immediate research activities to be initiated. The report covers the results compiled in the first project period, in 1992 and 1993. The data presented are for the most part tabulated data taken from the Final Report of the Bitterfeld Study (Heinrich et al.; 1994). Some tables of immunological parameters have been modified. These data are supplemented by data on internal heavy metal concentrations. The data refer to the anamnesis, especially of respiratory tract disease or allergies, complaints and symptoms, lung functional data, allergiologic findings, hematologic data (only of infants and children), immunologic parameters, and heavy metal accumulations. (orig.) [Deutsch] Fuer eine Bestandsaufnahme der umweltmedizinischen Forschung in der DDR, die Herausarbeitung von regionalen Umweltbelastungsschwerpunkten und die Darstellung des akuten Foerderungsbedarfs wurden umweltmedizinische Untersuchungen in den hochbelasteten Regionen Bitterfeld und Hettstedt sowie im gering belasteten Vergleichsgebiet Zerbst durchgefuehrt. Die vorliegende Zusammenstellung bezieht sich auf die Ergebnisse der ersten Untersuchungsetappe in den Jahren 1992/93. Es werden Daten tabellarisch zusammengestellt, die in dem Abschlussbericht der `Bitterfeld-Studie` (Heinrich, et al.; 1994) enthalten sind. Einzelne Tabellen zu immunologischen Parametern wurden modifiziert. Zusaetzlich werden die Daten durch die interne Schwermetallbelastung ergaenzt. So wird Bezug genommen auf die Krankengeschichte, speziell von Atemwegserkrankungen und Allergien, Beschwerden und Symptomen, auf

  17. Engineering geological and hydrogeological invstigations for storage of medium and low-activity nuclear waste at Cernavoda, Romania. Soil stabilisation using the CONSOLID system; Ingenieurgeologische und hydrogeologische Untersuchungen zur Lagerung mittel- und schwachradioaktiver Abfaelle in Cernavoda Rumaenien. Baugrundstabilisierung mit dem CONSOLID-System

    Energy Technology Data Exchange (ETDEWEB)

    Giurgea, V.; Merkler, G.P.; Hoetzl, H.; Hannich, D. [Karlsruhe Univ. (T.H.) (Germany). Lehrstuhl fuer Angewandte Geologie

    1998-12-31

    In Cernavoda/Romania investigations and planning from a low and middle radioactive waste disposal site have been carried out. A multitude of hydrogeological, geological, engineering geological criteria`s and constructional security measures were examined with respect to the strict regulations for such a waste site. This studies and measures are shortly analyzed and discussed in this paper. In accordance with the selection criteria for such a hazardous waste site, several laboratory and `in situ` tests, soil-mechanic studies, numerical modeling and foundation tests for soil stabilization with the CONSOLID-System are presented. (orig.) [Deutsch] Zur Einhaltung der strengen Vorgaben, die bei einem Deponiestandort fuer mittel- und schwachradioaktive Abfaelle gestellt werden, sind in Cernavoda/Rumaenien eine Vielzahl von hydrogeologischen und ingenieurgeologischen Untersuchungen sowie bautechnischen Sicherungsmassnahmen vorgesehen, die im Rahmen dieser Publikation kurz analysiert und diskutiert werden. Im Zusammenhang mit den geologischen und hydrogeologischen Auswahlkriterien des Standortes werden eine Reihe von Labor- und `in situ` Untersuchungen, Modellrechnungen sowie Baugrundstabilisierungsmassnahmen mit dem CONSOLID-System vorgestellt. (orig.)

  18. MORTAR WITH UNSERVICEABLE TIRE RESIDUES

    Directory of Open Access Journals (Sweden)

    J. A. Canova

    2009-01-01

    Full Text Available This study analyzes the effects of unserviceable tire residues on rendering mortar using lime and washed sand at a volumetric proportion of 1:6. The ripened composite was dried in an oven and combined with both cement at a volumetric proportion of 1:1.5:9 and rubber powder in proportional aggregate volumes of 6, 8, 10, and 12%. Water exudation was evaluated in the plastic state. Water absorption by capillarity, fresh shrinkage and mass loss, restrained shrinkage and mass loss, void content, flexural strength, and deformation energy under compression were evaluated in the hardened state. There was an improvement in the water exudation and water absorption by capillarity and drying shrinkage, as well as a reduction of the void content and flexural strength. The product studied significantly aided the water exudation from mortar and, capillary elevation in rendering.

  19. MORTAR WITH UNSERVICEABLE TIRE RESIDUES

    Directory of Open Access Journals (Sweden)

    José Aparecido Canova

    2009-12-01

    Full Text Available This study analyzes the effects of unserviceable tire residues on rendering mortar using lime and washed sand at a volumetric proportion of 1:6. The ripened composite was dried in an oven and combined with both cement at a volumetric proportion of 1:1.5:9 and rubber powder in proportional aggregate volumes of 6, 8, 10, and 12%. Water exudation was evaluated in the plastic state. Water absorption by capillarity, fresh shrinkage and mass loss, restrained shrinkage and mass loss, void content, flexural strength, and deformation energy under compression were evaluated in the hardened state. There was an improvement in the water exudation and water absorption by capillarity and drying shrinkage, as well as a reduction of the void content and flexural strength. The product studied significantly aided the water exudation from mortar and, capillary elevation in rendering.

  20. Upgraded wood residue fuels 1995

    International Nuclear Information System (INIS)

    Vinterbaeck, J.

    1995-01-01

    The Swedish market for upgraded residue fuels, i.e. briquettes, pellets and wood powder, has developed considerably during the nineties. The additional costs for the upgrading processes are regained and create a surplus in other parts of the system, e.g. in the form of higher combustion efficiencies, lower investment costs for burning equipment, lower operation costs and a diminished environmental impact. All these factors put together have resulted in a rapid growth of this part of the energy sector. In 1994 the production was 1.9 TWh, an increase of 37 % compared to the previous year. In the forthcoming heating season 1995/96 the production may reach 4 TWh. 57 refs, 11 figs, 6 tabs

  1. Forest residues in cattle feed

    Directory of Open Access Journals (Sweden)

    João Elzeário Castelo Branco Iapichini

    2012-12-01

    Full Text Available The ruminants are capable of converting low-quality food, when they are complementes with high-energy source. Through the use of regional agricultural residues is possible to conduct more economical production systems, since energetic foods have high cost in animal production. There is very abundant availability of residues in agroforestry activities worldwide, so that if a small fraction of them were used with appropriate technical criteria they could largely meet the needs of existing herds in the world and thus meet the demands of consumption of protein of animal origin. The Southwest Region of São Paulo State has large area occupied by reforestation and wide availability of non-timber forest residues, which may represent more concentrated energetic food for ruminant production. This experiment aimed to evaluate the acceptability of ground pine (20, 30 and 40%, replacing part of the energetic food (corn, present in the composition of the concentrate and was performed at the Experimental Station of Itapetininga - Forest Institute / SMA, in the dry season of 2011. It were used four crossbred steers, mean 18 months old, average body weight of 250 kg, housed in a paddock provided with water ad libitum and covered troughs for supplementation with the experimental diet. The adjustment period of the animals was of 07 days and the measurement of the levels of consumption, physiological changes, acceptability and physiological parameters were observed during the following 25 days. The concentrate supplement was formulated based on corn (76.2%, Soybean Meal (20%, urea (2%, Ammonium sulfate (0.4%, calcite (1.4%, Mineral Core (1% and finely ground Pine Cone, replacing corn. In preparing food, the formulas were prepared to make them isoproteic/energetic, containing the following nutrient levels: 22% Crude Protein (CP and 79% of Total Nutrients (TDN. The animals received the supplement in three steps for each level of cone replaced, being offered in the

  2. Landfill Mining of Shredder Residues

    DEFF Research Database (Denmark)

    Hansen, Jette Bjerre; Hyks, Jiri; Shabeer Ahmed, Nassera

    In Denmark, shredder residues (SR) are classified as hazardous waste and until January 2012 the all SR were landfilled. It is estimated that more than 1.8 million tons of SR have been landfilled in mono cells. This paper describes investigations conducted at two Danish landfills. SR were excavated...... from the landfills and size fractionated in order to recover potential resources such as metal and energy and to reduce the amounts of SR left for re-landfilling. Based on the results it is estimated that 60-70% of the SR excavated could be recovered in terms of materials or energy. Only a fraction...... with particle size less than 5 mm needs to be re-landfilled at least until suitable techniques are available for recovery of materials with small particle sizes....

  3. Residues and duality for projective algebraic varieties

    CERN Document Server

    Kunz, Ernst; Dickenstein, Alicia

    2008-01-01

    This book, which grew out of lectures by E. Kunz for students with a background in algebra and algebraic geometry, develops local and global duality theory in the special case of (possibly singular) algebraic varieties over algebraically closed base fields. It describes duality and residue theorems in terms of K�hler differential forms and their residues. The properties of residues are introduced via local cohomology. Special emphasis is given to the relation between residues to classical results of algebraic geometry and their generalizations. The contribution by A. Dickenstein gives applications of residues and duality to polynomial solutions of constant coefficient partial differential equations and to problems in interpolation and ideal membership. D. A. Cox explains toric residues and relates them to the earlier text. The book is intended as an introduction to more advanced treatments and further applications of the subject, to which numerous bibliographical hints are given.

  4. Using cotton plant residue to produce briquettes

    Energy Technology Data Exchange (ETDEWEB)

    Coates, W. [University of Arizona, Tucson, AZ (United States). Bioresources Research Facility

    2000-07-01

    In Arizona, cotton (Gossypium) plant residue left in the field following harvest must be buried to prevent it from serving as an overwintering site for insects such as the pink bollworm. Most tillage operations employed to incorporate the residue into the soil are energy intensive and often degrade soil structure. Trials showed that cotton plant residue could be incorporated with pecan shells to produce commercially acceptable briquettes. Pecan shell briquettes containing cotton residue rather than waste paper were slightly less durable, when made using equivalent weight mixtures and moisture contents. Proximate and ultimate analyses showed the only difference among briquette samples to be a higher ash content in those made using cotton plant residue. Briquettes made with paper demonstrated longer flame out time, and lower ash percentage, compared to those made with cotton plant residue. (author)

  5. Distribution of residues and primitive roots

    Indian Academy of Sciences (India)

    Replacing the function f by g, we get the required estimate for N(p, N). D. Proof of Theorem 1.1. When p = 7, we clearly see that (1, 2) is a consecutive pair of quadratic residue modulo 7. Assume that p ≥ 11. If 10 is a quadratic residue modulo p, then we have (9, 10) as a consecutive pair of quadratic residues modulo p, ...

  6. Residual analysis for spatial point processes

    DEFF Research Database (Denmark)

    Baddeley, A.; Turner, R.; Møller, Jesper

    We define residuals for point process models fitted to spatial point pattern data, and propose diagnostic plots based on these residuals. The techniques apply to any Gibbs point process model, which may exhibit spatial heterogeneity, interpoint interaction and dependence on spatial covariates. Ou...... or covariate effects. Q-Q plots of the residuals are effective in diagnosing interpoint interaction. Some existing ad hoc statistics of point patterns (quadrat counts, scan statistic, kernel smoothed intensity, Berman's diagnostic) are recovered as special cases....

  7. Carbaryl residues in maize and processed products

    International Nuclear Information System (INIS)

    Qureshi, M.J.; Sattar, A. Jr.; Naqvi, M.H.

    1981-01-01

    Carbaryl residues in two local maize varieties were determined using a colorimetric method. No significant differences were observed for residues of the two varieties which ranged between 12.0 to 13.75 mg/kg in the crude oil, and averaged 1.04 and 0.67 mg/kg in the flour and cake respectively. In whole maize plants, carbaryl residues declined to approximately 2 mg/kg 35 days after treatment. Cooking in aqueous, oil or aqueous-oil media led to 63-83% loss of carbaryl residues, after 30 minutes. (author)

  8. Process for measuring residual stresses

    International Nuclear Information System (INIS)

    Elfinger, F.X.; Peiter, A.; Theiner, W.A.; Stuecker, E.

    1982-01-01

    No single process can at present solve all problems. The complete destructive processes only have a limited field of application, as the component cannot be reused. However, they are essential for the basic determination of stress distributions in the field of research and development. Destructive and non-destructive processes are mainly used if investigations have to be carried out on original components. With increasing component size, the part of destructive tests becomes smaller. The main applications are: quality assurance, testing of manufactured parts and characteristics of components. Among the non-destructive test procedures, X-raying has been developed most. It gives residual stresses on the surface and on surface layers near the edges. Further development is desirable - in assessment - in measuring techniques. Ultrasonic and magnetic crack detection processes are at present mainly used in research and development, and also in quality assurance. Because of the variable depth of penetration and the possibility of automation they are gaining in importance. (orig./RW) [de

  9. Characterization Report on Sand, Slag, and Crucible Residues and on Fluoride Residues

    International Nuclear Information System (INIS)

    Murray, A.M.

    1999-01-01

    This paper reports on the chemical characterization of the sand, slag, and crucible (SS and C) residues and the fluoride residues that may be shipped from the Rocky Flats Environmental Technology Site (RFETS) to Savannah River Site (SRS)

  10. Residuals Management and Water Pollution Control Planning.

    Science.gov (United States)

    Environmental Protection Agency, Washington, DC. Office of Public Affairs.

    This pamphlet addresses the problems associated with residuals and water quality especially as it relates to the National Water Pollution Control Program. The types of residuals and appropriate management systems are discussed. Additionally, one section is devoted to the role of citizen participation in developing management programs. (CS)

  11. Tank 12H residuals sample analysis report

    Energy Technology Data Exchange (ETDEWEB)

    Oji, L. N. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Shine, E. P. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Diprete, D. P. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Coleman, C. J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hay, M. S. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-06-11

    The Savannah River National Laboratory (SRNL) was requested by Savannah River Remediation (SRR) to provide sample preparation and analysis of the Tank 12H final characterization samples to determine the residual tank inventory prior to grouting. Eleven Tank 12H floor and mound residual material samples and three cooling coil scrape samples were collected and delivered to SRNL between May and August of 2014.

  12. Soil water evaporation and crop residues

    Science.gov (United States)

    Crop residues have value when left in the field and also when removed from the field and sold as a commodity. Reducing soil water evaporation (E) is one of the benefits of leaving crop residues in place. E was measured beneath a corn canopy at the soil suface with nearly full coverage by corn stover...

  13. Densification of FL Chains via Residuated Frames

    Czech Academy of Sciences Publication Activity Database

    Baldi, Paolo; Terui, K.

    2016-01-01

    Roč. 75, č. 2 (2016), s. 169-195 ISSN 0002-5240 R&D Projects: GA ČR GAP202/10/1826 Keywords : densifiability * standard completeness * residuated lattices * residuated frames * fuzzy logic Subject RIV: BA - General Mathematics Impact factor: 0.625, year: 2016

  14. Does Bt Corn Really Produce Tougher Residues

    Science.gov (United States)

    Bt corn hybrids produce insecticidal proteins that are derived from a bacterium, Bacillus thuringiensis. There have been concerns that Bt corn hybrids produce residues that are relatively resistant to decomposition. We conducted four experiments that examined the decomposition of corn residues und...

  15. Semantic Tagging with Deep Residual Networks

    NARCIS (Netherlands)

    Bjerva, Johannes; Plank, Barbara; Bos, Johan

    2016-01-01

    We propose a novel semantic tagging task, semtagging, tailored for the purpose of multilingual semantic parsing, and present the first tagger using deep residual networks (ResNets). Our tagger uses both word and character representations and includes a novel residual bypass architecture. We evaluate

  16. Cement production from coal conversion residues

    International Nuclear Information System (INIS)

    Brown, L.D.; Clavenna, L.R.; Eakman, J.M.; Nahas, N.C.

    1981-01-01

    Cement is produced by feeding residue solids containing carbonaceous material and ash constituents obtained from converting a carbonaceous feed material into liquids and/or gases into a cement-making zone and burning the carbon in the residue solids to supply at least a portion of the energy required to convert the solids into cement

  17. Residual stress concerns in containment analysis

    International Nuclear Information System (INIS)

    Costantini, F.; Kulak, R. F.; Pfeiffer, P. A.

    1997-01-01

    The manufacturing of steel containment vessels starts with the forming of flat plates into curved plates. A steel containment structure is made by welding individual plates together to form the sections that make up the complex shaped vessels. The metal forming and welding process leaves residual stresses in the vessel walls. Generally, the effect of metal forming residual stresses can be reduced or virtually eliminated by thermally stress relieving the vesseL In large containment vessels this may not be practical and thus the residual stresses due to manufacturing may become important. The residual stresses could possibly tiect the response of the vessel to internal pressurization. When the level of residual stresses is significant it will affect the vessel's response, for instance the yielding pressure and possibly the failure pressure. The paper will address the effect of metal forming residual stresses on the response of a generic pressure vessel to internal pressurization. A scoping analysis investigated the effect of residual forming stresses on the response of an internally pressurized vessel. A simple model was developed to gain understanding of the mechanics of the problem. Residual stresses due to the welding process were not considered in this investigation

  18. Electrodialytic remediation of air pollution control residues

    DEFF Research Database (Denmark)

    Jensen, Pernille Erland

    Air pollution control (APC) residue from municipal solid waste incineration (MSWI) consists of the fly ash, and, in dry and semi-dry systems, also the reaction products from the flue gas cleaning process. APC residue is considered a hazardous waste due to its high alkalinity, high content of salt...

  19. Residuals and the Residual-Based Statistic for Testing Goodness of Fit of Structural Equation Models

    Science.gov (United States)

    Foldnes, Njal; Foss, Tron; Olsson, Ulf Henning

    2012-01-01

    The residuals obtained from fitting a structural equation model are crucial ingredients in obtaining chi-square goodness-of-fit statistics for the model. The authors present a didactic discussion of the residuals, obtaining a geometrical interpretation by recognizing the residuals as the result of oblique projections. This sheds light on the…

  20. Recipe for residual oil saturation determination

    Energy Technology Data Exchange (ETDEWEB)

    Guillory, A.J.; Kidwell, C.M.

    1979-01-01

    In 1978, Shell Oil Co., in conjunction with the US Department of Energy, conducted a residual oil saturation study in a deep, hot high-pressured Gulf Coast Reservoir. The work was conducted prior to initiation of CO/sub 2/ tertiary recovery pilot. Many problems had to be resolved prior to and during the residual oil saturation determination. The problems confronted are outlined such that the procedure can be used much like a cookbook in designing future studies in similar reservoirs. Primary discussion centers around planning and results of a log-inject-log operation used as a prime method to determine the residual oil saturation. Several independent methods were used to calculate the residual oil saturation in the subject well in an interval between 12,910 ft (3935 m) and 12,020 ft (3938 m). In general, these numbers were in good agreement and indicated a residual oil saturation between 22% and 24%. 10 references.

  1. Harvesting and handling agricultural residues for energy

    Energy Technology Data Exchange (ETDEWEB)

    Jenkins, B.M.; Summer, H.R.

    1986-05-01

    Significant progress in understanding the needs for design of agricultural residue collection and handling systems has been made but additional research is required. Recommendations are made for research to (a) integrate residue collection and handling systems into general agricultural practices through the development of multi-use equipment and total harvest systems; (b) improve methods for routine evaluation of agricultural residue resources, possibly through remote sensing and image processing; (c) analyze biomass properties to obtain detailed data relevant to engineering design and analysis; (d) evaluate long-term environmental, social, and agronomic impacts of residue collection; (e) develop improved equipment with higher capacities to reduce residue collection and handling costs, with emphasis on optimal design of complete systems including collection, transportation, processing, storage, and utilization; and (f) produce standard forms of biomass fuels or products to enhance material handling and expand biomass markets through improved reliability and automatic control of biomass conversion and other utilization systems. 118 references.

  2. Computational prediction of protein hot spot residues.

    Science.gov (United States)

    Morrow, John Kenneth; Zhang, Shuxing

    2012-01-01

    Most biological processes involve multiple proteins interacting with each other. It has been recently discovered that certain residues in these protein-protein interactions, which are called hot spots, contribute more significantly to binding affinity than others. Hot spot residues have unique and diverse energetic properties that make them challenging yet important targets in the modulation of protein-protein complexes. Design of therapeutic agents that interact with hot spot residues has proven to be a valid methodology in disrupting unwanted protein-protein interactions. Using biological methods to determine which residues are hot spots can be costly and time consuming. Recent advances in computational approaches to predict hot spots have incorporated a myriad of features, and have shown increasing predictive successes. Here we review the state of knowledge around protein-protein interactions, hot spots, and give an overview of multiple in silico prediction techniques of hot spot residues.

  3. Computational Prediction of Hot Spot Residues

    Science.gov (United States)

    Morrow, John Kenneth; Zhang, Shuxing

    2013-01-01

    Most biological processes involve multiple proteins interacting with each other. It has been recently discovered that certain residues in these protein-protein interactions, which are called hot spots, contribute more significantly to binding affinity than others. Hot spot residues have unique and diverse energetic properties that make them challenging yet important targets in the modulation of protein-protein complexes. Design of therapeutic agents that interact with hot spot residues has proven to be a valid methodology in disrupting unwanted protein-protein interactions. Using biological methods to determine which residues are hot spots can be costly and time consuming. Recent advances in computational approaches to predict hot spots have incorporated a myriad of features, and have shown increasing predictive successes. Here we review the state of knowledge around protein-protein interactions, hot spots, and give an overview of multiple in silico prediction techniques of hot spot residues. PMID:22316154

  4. Residual stresses in zircaloy welds

    International Nuclear Information System (INIS)

    Santisteban, J. R.; Fernandez, L; Vizcaino, P.; Banchik, A.D.; Samper, R; Martinez, R. L; Almer, J; Motta, A.T.; Colas, K.B; Kerr, M.; Daymond, M.R

    2009-01-01

    Welds in Zirconium-based alloys are susceptible to hydrogen embrittlement, as H enters the material due to dissociation of water. The yield strain for hydride cracking has a complex dependence on H concentration, stress state and texture. The large thermal gradients produced by the applied heat; drastically changes the texture of the material in the heat affected zone, enhancing the susceptibility to delayed hydride cracking. Normally hydrides tend to form as platelets that are parallel to the normal direction, but when welding plates, hydride platelets may form on cooling with their planes parallel to the weld and through the thickness of the plates. If, in addition to this there are significant tensile stresses, the susceptibility of the heat affected zone to delayed hydride cracking will be increased. Here we have measured the macroscopic and microscopic residual stressed that appear after PLASMA welding of two 6mm thick Zircaloy-4 plates. The measurements were based on neutron and synchrotron diffraction experiments performed at the Isis Facility, UK, and at Advanced Photon Source, USA, respectively. The experiments allowed assessing the effect of a post-weld heat treatment consisting of a steady increase in temperature from room temperature to 450oC over a period of 4.5 hours; followed by cooling with an equivalent cooling rate. Peak tensile stresses of (175± 10) MPa along the longitudinal direction were found in the as-welded specimen, which were moderately reduced to (150±10) MPa after the heat-treatment. The parent material showed intergranular stresses of (56±4) MPa, which disappeared on entering the heat-affected zone. In-situ experiments during themal cyclong of the material showed that these intergranular stresses result from the anisotropy of the thermal expansion coefficient of the hexagonal crystal lattice. [es

  5. The use of electron spin resonance spectroscopy for the detection of irradiated shellfish and spices; Elektronenspinresonanz-spektroskopische Untersuchungen zur Identifizierung bestrahlter Krustentiere und Gewuerze: Durchfuehrung eines Ringversuches an Nordseekrabben, Kaisergranat und Paprikapulver

    Energy Technology Data Exchange (ETDEWEB)

    Helle, N. [Inst. fuer Sozialmedizin und Epidemiologie des Bundesgesundheitsamtes, Berlin (Germany); Linke, B. [Inst. fuer Sozialmedizin und Epidemiologie des Bundesgesundheitsamtes, Berlin (Germany); Boegl, K.W. [Inst. fuer Sozialmedizin und Epidemiologie des Bundesgesundheitsamtes, Berlin (Germany); Schreiber, G.A. [Inst. fuer Sozialmedizin und Epidemiologie des Bundesgesundheitsamtes, Berlin (Germany)

    1994-12-31

    nicht laenger aufrechterhalten werden koennen. Einer Aufnahme der ESR-Methode fuer die Identifizierung von Krustentieren und Gewuerzen in die Sammlung der amtlichen Methoden nach Paragraph35LMBG steht nach Meinung der Autoren nichts mehr im Weg. Dennoch bleiben eine Reihe von Forschungsaufgaben im Bereich der beiden hier behandelten Lebensmittelgruppen zu loesen, von denen hier nur einige genannt werden sollen: - Untersuchungen an weiteren Krustentierarten zur Erstellung einer Spektrensammlung, die in der Routinekontrolle verwendet werden kann; - Die Aufklaerung der Struktur der (neben dem CO{sup 2-}-Radikal) bestrahlungsspezifisch gebildeten Radikale; - Untersuchung des Einflusses von Herkunft, Fangzeit und Entwicklungsstadium der Tiere auf die ESR-Spektren; - Untersuchung weiterer Gewuerze; - Aufklaerung des Zusammenhanges von Cellulosegehalt und Radikalkonzentration. (orig./vhe)

  6. Studies on the production of building material grade slag from hazardous-waste incineration plants; Untersuchungen zur Herstellung einer Schlacke mit Baustoffqualitaet aus Sondermuellverbrennungsanlagen

    Energy Technology Data Exchange (ETDEWEB)

    Reich, J.; Herbel, J.D.; Pasel, C. [Duisburg Univ. (Gesamthochschule) (Germany). Fachgebiet Abfalltechnik

    1998-09-01

    In an attempt to restore the competitive power of hazardous-waste incineration within the present legal framework, plant operators have in some cases lowered disposal prices below the break-even point; in this respect there is no further room for improvement. One approach towards a new marketable solution could be to use rotary kilns not only for disposal but also as production plants. This could be achieved by means of input control and loading materials. If, for example, the slag remaining after combustion could be made to meet building material specifications, thus providing a marketable product, then rotary kilns would be able to serve as production plants for a secondary raw material. If it should prove possible in the course of manufacturing campaigns to develop slags from hazardous-waste incineration plants to a marketable product, then operators will thus have complied to the demand of the Law on Recycling and Waste Management for waste avoidance and that of the Emission Control Law for residue recycling. Targeted use of suitable loading materials for quality improvement could enable operators of hazardous-waste incineration plants to secure a new strategic position on the market as building material manufacturers and utilise existing plant capacities. [Deutsch] Um die Sonderabfallverbrennung im Rahmen der rechtlichen Vorgaben wieder konkurrenzfaehig zu machen, haben die Anlagenbetreiber die Entsorgungspreise teilweise unter die Grenze der Kostendeckung zurueckgenommen; hier besteht kein Spielraum mehr. Ein neuer, marktgerechter Ansatz koennte sich dann ergeben, wenn die Drehrohroefen statt als Beseitigungsaggregate durch Inputsteuerung und Zuschlaege eventuell auch als Produktionsanlagen einzusetzen waeren. Wenn z.B. die Schlacke, als Rueckstand aus der Verbrennung, als ein im Baustoffmarkt absetzbares Produkt nach Qualitaetskriterien gezielt hergestellt wuerde, koennte der Drehrohrofen als Produktionsanlage fuer einen Sekundaerrohstoff betrieben werden

  7. Investigations to single and combined effects of organic pollutants (PAH, PCB) and heavy metals (Cd, Cu) on biomass production and soil-plant transfer by cultivation of raw and energy plants. Final report; Bodenoekologische Untersuchungen zur Wirkung und Verteilung von organischen Stoffgruppen (PAK, PCB) in ballungsraumtypischen Oekosystemen. Untersuchungen zu Einzel- und Kombinationswirkungen von organischen Schadstoffen (PAK, PCB) und Schwermetallen (Cd, Cu) auf Biomasseertrag und Boden-Pflanze-Transfer beim Anbau von Rohstoff- und Energiepflanzen. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Metz, R.; Dorn, J.; Sauer, W.

    1997-05-01

    Together with polycyclic aromatic hydrocarbons, polychlorinated biphenyls and heavy metals other elements and compounds as well as nutrients are present in typical contaminated areas like sewage fields. They are found as mixed undisturbed contamination and the transfer of these pollutants into food or forage plants is dangerous for people. So far investigations of ecological effects of these substances are focused mainly on single agents or on some agents of the same chemical group. But in most cases the mixture of different chemical compounds in extremely contaminated fields cause synergistic effects resulting in yield reduction and decrease of microbiological activity. Therefore the aim of the present report is to show combined effects of selected organic pollutants (benzo-a-pyren, 2,2`, 5,5` tetrachlorbiphenyl) and heavy metals (cadmium, copper) on parameters of soil biology, biomass production and pollutant uptake by plants. Resulting changes of cellulose decomposition, CO{sub 2}-release from soil and N-mineralization after separated and combined enrichment of weakly polluted sewage field soil with said pollutants up to concentrations of extremely polluted sewage field soils are presented in this paper. Data of yields and pollutant contents of plants (rye, maize and potatoes) cultivated on experimental soils are summarised and ecotoxicological risks resulting form pollutants and their interactions discussed. (orig.) [Deutsch] Polycyclische aromatische Kohlenwasserstoffe, Polychlorierte Biphenyle und Schwermetalle sind zusammen mit anderen Elementen und Verbindungen u.a. auch mit Naehrstoffen als gemischte gewachsene Kontamination in ballungsraumtypischen Belastungsflaechen (z.B. Rieselfelder) vorhanden und stellen bei einem Transfer in Nahrungs- und Futterpflanzen eine besondere Gefaehrdung fuer den Menschen dar. Bei Untersuchungen hinsichtlich oekosystemarer Konsequenzen dieser Substanzen wurden bisher vor allem Einzelstoffbetrachtungen angestellt bzw. mehrere

  8. Residues from waste incineration. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Astrup, T.; Juul Pedersen, A.; Hyks, J.; Frandsen, F.J.

    2009-08-15

    The overall objective of the project was to improve the understanding of the formation and characteristics of residues from waste incineration. This was done focusing on the importance of the waste input and the operational conditions of the furnace. Data and results obtained from the project have been discussed in this report according to the following three overall parts: i) mass flows and element distribution, ii) flue gas/particle partitioning and corrosion/deposition aspects, and iii) residue leaching. This has been done with the intent of structuring the discussion while tacitly acknowledging that these aspects are interrelated and cannot be separated. Overall, it was found that the waste input composition had significant impact of the characteristics of the generated residues. A similar correlation between operational conditions and residue characteristics could not be observed. Consequently, the project recommend that optimization of residue quality should focus on controlling the waste input composition. The project results showed that including specific waste materials (and thereby also excluding the same materials) may have significant effects on the residue composition, residue leaching, aerosol and deposit formation.It is specifically recommended to minimize Cl in the input waste. Based on the project results, it was found that a significant potential for optimization of waste incineration exist. (author)

  9. Use of ultrasound in petroleum residue upgradation

    Energy Technology Data Exchange (ETDEWEB)

    Sawarkar, A.N.; Pandit, A.B.; Samant, S.D.; Joshi, J.B. [Mumbai Univ., Mumbai (India). Inst. of Chemical Technology

    2009-06-15

    The importance of bottom-of-the barrel upgrading has increased in the current petroleum refining scenario because of the progressively heavier nature of crude oil. Heavy residues contain large concentrations of metals such as vanadium and nickel which foul catalysts and reduce the potential effect of residue fluidized catalytic cracking. This study showed that the cavitational energy induced by ultrasound be be successfully used to upgrade hydrocarbon mixtures. Conventional processes for the upgrading of residual feedstocks, such as thermal cracking and catalytic cracking, were carried out in the temperature range of 400-520 degrees C. Experiments were performed on 2 vacuum residues, Arabian mix vacuum residue (AMVR) and Bombay high vacuum residue (BHVR) and 1 Haldia asphalt (HA). These were subjected to acoustic cavitation for different reaction times from 15 to 120 minutes at ambient temperature and pressure. Two acoustic cavitation devices were compared, namely the ultrasonic bath and ultrasonic horn. In particular, this study compared the ability of these 2 devices to upgrade the petroleum residues to lighter, more value-added products. Different surfactants were used to examine the effect of ultrasound on upgrading the residue when emulsified in water. In order to better understand the reaction mechanism, a kinetic model was developed based on the constituents of the residue. The ultrasonic horn was found to be more effective in bringing about the upgrading than ultrasonic bath. The study also showed that the acoustic cavitation of the aqueous emulsified hydrocarbon mixture could reduce the asphaltenes content to a greater extent than the acoustic cavitation of non-emulsified hydrocarbon mixture. 20 refs., 11 tabs., 17 figs.

  10. Residual stress analysis in thick uranium films

    International Nuclear Information System (INIS)

    Hodge, A.M.; Foreman, R.J.; Gallegos, G.F.

    2005-01-01

    Residual stress analysis was performed on thick, 1-25 μm, depleted uranium (DU) films deposited on an Al substrate by magnetron sputtering. Two distinct characterization techniques were used to measure substrate curvature before and after deposition. Stress evaluation was performed using the Benabdi/Roche equation, which is based on beam theory of a bi-layer material. The residual stress evolution was studied as a function of coating thickness and applied negative bias voltage (0, -200, -300 V). The stresses developed were always compressive; however, increasing the coating thickness and applying a bias voltage presented a trend towards more tensile stresses and thus an overall reduction of residual stresses

  11. Residues in food derived from animals

    International Nuclear Information System (INIS)

    Grossklaus, D.

    1989-01-01

    The first chapter presents a survey of fundamentals and methods of the detection and analysis of residues in food derived from animals, also referring to the resulting health hazards to man, and to the relevant legal provisions. The subsequent chapters have been written by experts of the Federal Health Office, each dealing with particular types of residues such as those of veterinary drugs, additives to animal feeds, pesticide residues, and with environmental pollutants and the contamination of animal products with radionuclides. (MG) With 35 figs., 61 tabs [de

  12. The role of computed tomography in evaluation of a white matter edema during postoperative brain radiation therapy; Beobachtung von Oedemen in der weissen Substanz waehrend postoperativer Hirnbestrahlung. Die Rolle computertomographischer Untersuchungen

    Energy Technology Data Exchange (ETDEWEB)

    Thalacker, U.; Somogyi, A.; Nemeth, G. [Imre-Haynal-Univ. fuer Gesundheitswissenschaften, Strahlentherapeutischer Lehrstuhl, Budapest (Hungary); Liszka, G. [Staatliches Onkologisches Inst., Roentgendiagnostische Abt., Budapest (Hungary)

    1998-01-01

    ./MG) [Deutsch] Ziel unserer Untersuchungen war es festzustellen, inwieweit man ein waehrend einer postoperativen Hirnbestrahlung aufgetretenes Oedem und dessen Verlauf nach Diuretikagabe mit Hilfe von computertomographisch ermittelten HE-Werten (Houndsfield-Einheiten) verfolgen kann. In der ersten Untersuchungsserie wurden bei 75 Patienten (Alter 20 bis 65 Jahren; Patientegruppe 1) mit Zephalalgie die HE-Werte der nativen unveraenderten weissen Substanz bestimmt. In der zweiten Patientengruppe befanden sich 20 Patienten mit operierten Gehirntumoren bei denen von Strahlentherapie und nach 10, 20, 30, 40 und 50 Gy die HE-Werte bestimmt wurden. In der dritten Patientengruppe befanden sich 64 Patienten, die wegen eines Gehirntumors bereits operiert worden waren und nun einer postoperativen Radiatio unterzogen wurden. In der zweiten und dritten Patientengruppe wurden die Bestrahlungen teils mit Telekobalt, teils mit Photonen eines Linearbeschleunigers (6 und 9 MeV) durchgefuehrt. Bei der CT-Untersuchungen kam ein Siemens Somatom CR (125 kV, 450 mAs) mit einer Scan-Zeit von 5 s zur Anwendung. In der ersten Patientengruppe stellten wir keine Werte unter 30 HE in der weissen Substanz fest. Die Werte der zweiten Patientengruppe bewegten sich ohne Diuretikagabe zu Beginn der Bestrahlung zwischen 25 und 29 HE. Bei einem Abfall unter 25 HE traten Dauerkopfschmerz, Schwindel und Querulanz auf. In diesen Faellen wurde die diuretische Behandlung so lange gesteigert, bis wieder Werte von 25 bis 29 HE vorlagen. In derm18itten Patientengruppe stellten wir zu Beginn der Radiatio bei 47 von 64 Patienten Werte von 25 bis 29 HE fest. Obwohl jedem Patienten von Anfang an Furosemid verabreicht wurde, verringerten sich bei 28 Patienten die Werte auf 20 bis 24 HE. Eine Verbesserung konnte mit zusaetzlicher Gabe von Glyzerin per os erreicht werden. Daraufhin pendelten sich die Werte auf 25 bis 29 HE ein. Lediglich in einem Fall fielen die Werte unter 20 HE. Hier war eine zusaetzliche Gabe Mannit

  13. Guidelines for selection and presentation of residue values of pesticides

    NARCIS (Netherlands)

    Velde-Koerts T van der; Hoeven-Arentzen PH van; Ossendorp BC; RIVM-SIR

    2004-01-01

    Pesticide residue assessments are executed to establish legal limits, called Maximum Residue Limits (MRLs). MRLs are derived from the results of these pesticide residue trials, which are performed according to critical Good Agricultural Practice. Only one residue value per residue trial may be

  14. High-resolution seismic studies on geothermal heat extraction from low, permeable rock strata in the city of Hanover using depth-dependent, optimized acquisition parameters; Hochaufloesende seismische Untersuchungen zur Erdwaermegewinnung aus tiefen, permeablen Gesteinsformationen im Stadtgebiet Hannover unter Verwendung von Profilen mit teufenabhaengig optimierten Akquisitionsparametern

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, R. [GGA-Inst. fuer Geowissenschaftliche Gemeinschaftsaufgaben, Hannover (Germany)

    2002-07-01

    The investigations accompanied a demonstration project on geothermal heat production planned by GEOZENTRUM, Hanover, in which geothermal heat will be produced from muschelkalk and mottled sandstone in the area of Hanover/Misburg by means of ''generated geothermal systems'' (GeneSys). This involves detailed seismic exploration of the geological strata of all depth levels. Profile data of the Thoense gas field will be integrated. [German] Die Untersuchungen stehen im Zusammenhang mit dem vom GEOZENTRUM-Hannover geplanten Demonstrationsvorhaben zur Erdwaermegewinnung mittels ''Generierter geothermischer Energie Systeme'' (GeneSys) im Stadtgebiet Hannover/Misburg. Zielhorizonte sind der Muschelkalk und der Buntsandstein. Dazu sollten die geologischen Strukturen im gesamten Teufenbereich detailliert seismisch erkundet werden, wobei neben neuen Messungen auch die vorliegenden Informationen aus bereits gemessenen Profilen des Gasfeldes Thoense einfliessen. (orig.)

  15. Comparative studies on ultrasonic, friction, laser and resistance pressure welding of NiTi shape memory alloys with high-alloy steels. Final report; Vergleichende Untersuchungen zum Ultraschall-, Reib-, Laserstrahl- und Widerstandspressschweissen von NiTi-Shape-Memory-Metall mit hochlegierten Staehlen. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Zuckschwerdt, K.

    2000-04-01

    The suitability of different welding techniques for welding of NiTi shape memory alloys with high-alloy steel (C12CrNi17-7, X5CrNiNb19-9, X20Cr13) was investigated. The quality of the welds was analyzed using mechanical-technological, fractographic, metallographic and electron microscopy analysis. [German] Ziel dieses Forschungsvorhabens ist es, die Eignung der einzelnen Schweissverfahren fuer das Fuegen von NiTi-Formgedaechtnislegierungen mit hochlegiertem Stahl (X12CrNi17-7, X5CrNiNb19-9, X20Cr13) darzustellen und zu beurteilen. Die Qualitaet der Fuegeverbindungen wird mit Hilfe mechanisch-technologischer, fraktographischer, metallographischer und elektronenmikroskopischer Untersuchungen bewertet.

  16. AG Turbo, Turbotech II, project 1.244. Experimental investigations of rotary instabilities in axial compressors and their effects in terms of compressor stability. Final report; AG Turbo, Turbotech II, Vorhaben 1.244. Experimentelle Untersuchungen rotierender Instabilitaeten in Axialverdichtern und ihr Einfluss auf die Verdichterstabilitaet. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Holste, F; Haukap, C; Kameier, F

    2000-07-10

    The physical phenomena of rotary instabilities in industrial compressors and high-pressure aircraft compressors were investigated, which may be a cause of compressor blade fracture. The investigations were carried out by Duesseldorf Technical University on behalf of Rolls-Royce Deutschland GmbH at the new four-stage low-pressure compressor test stand of TU Dresden University. Extensive measurements were made both in the rotary and stationary system in the third compressor stage. Rotary instabilities could be detected by increasing the clearance between the blade tip and compressor wall. Modal analyses yielded a rate of about 30 for 63 blades, i.e. a characteristic wavelength of about twice the length of a blade. So far, an accurate description of the physical mechanism was impossible. Investigations using a Snubber model showed no significant influence on the rotary instabilities. [German] Im Turbotech II Forschungsvorhaben 1.244 wurden die physikalischen Vorgaenge der rotierenden Instabilitaet untersucht, die sowohl in industriellen Verdichtern als auch in Hochdruckverdichtern von Flugtriebwerken auftreten koennen. Diese Instabilitaeten stellen eine zusaetzliche Belastung fuer die Verdichterblaetter dar und koennen damit die Ursache fuer Blattbrueche sein. Im Auftrag von Rolls-Royce Deutschland wurden die Untersuchungen von der Faachhochschule Duesseldorf durchgefuehrt. Testobjekt war der neu aufgebaute vier stufige Niedergeschwindigkeitsverdichter der TU Dresden. In enger Kooperation mit den Vorhaben 1.243 und 1.246 wurden umfangreiche Messungen sowohl im rotierenden als auch im festen System an der dritten Stufe des Verdichters durchgefuehrt. Durch Vergroesserung des Spaltes zwischen Schaufelspitze und Verdichterwandung konnten rotierenden Instabilitaeten nachgewiesen werden. Modenanalysen ergaben Umfangsordnungen von ungefaehr 30 bei einer Blattzahl von 63, wodurch die charakteristische Wellenlaenge etwa zwei Schaufelwellenlaengen entspricht. Eine exakte

  17. Radiation doses from residual radioactivity

    International Nuclear Information System (INIS)

    Okajima, Shunzo; Fujita, Shoichiro; Harley, John H.

    1987-01-01

    requires knowing the location of the person to within about 200 m from the time of the explosion to a few weeks afterwards. This is an effort that might be comparable to the present shielding study for survivors. The sizes of the four exposed groups are relatively small; however, the number has been estimated only for those exposed to fallout in the Nishiyama district of Nagasaki. Okajima listed the population of Nishiyama as about 600 at the time of the bomb. No figures are available for the other three groups. The individual exposures from residual radiation may not be significant compared with the direct radiation at the time of the bomb. On the other hand, individuals with potential exposure from these sources are dubious candidates for inclusion in a cohort that was presumably not exposed. For comparison with organ doses estimated in other parts of this program, the exposure estimates are converted to absorbed dose in tissue. The first conversion of exposure to absorbed dose in air uses the factor rad in air 0.87 x exposure in R. UNSCEAR uses an average combined factor of 0.7 to convert absorbed dose in air to absorbed dose in tissue for the whole body. This factor accounts for the change in material (air to tissue) and for backscatter and the shielding afforded by other tissues of the body. No allowance for shielding by buildings has been included here. The cumulative fallout exposures given above become absorbed doses in tissue of 12 to 24 rad for Nagasaki and 0.6 to 2 rad for Hiroshima. The cumulative exposures from induced radioactivity become absorbed doses in tissue of 18 to 24 rad for Nagasaki and about 50 rad for Hiroshima. (author)

  18. Cyolane residues in milk of lactating goats

    International Nuclear Information System (INIS)

    Zayed, S.M.A.D.; Osman, A.; Fakhr, I.M.I.

    1981-01-01

    Consecutive feeding of lactating goats with 14 C-alkyl labelled cyolane for 5 days at dietary levels 8 and 16 ppm resulted in the appearance of measurable insecticide residues in milk (0.02-0.04 mg/kg). The residue levels were markedly reduced after a withdrawal period of 7 days. Analysis of urine and milk residues showed the presence of similar metabolites in addition to the parent compound. The major part of the residue consisted of mono-, diethyl phosphate and 2 hydrophilic unknown metabolites. The erythrocyte cholinesterase activity was reduced to about 50% after 24 hours whereas the plasma enzyme was only slightly affected. The animals remained symptom-free during the experimental period. (author)

  19. Surgical treatment for residual or recurrent strabismus

    Directory of Open Access Journals (Sweden)

    Tao Wang

    2014-12-01

    Full Text Available Although the surgical treatment is a relatively effective and predictable method for correcting residual or recurrent strabismus, such as posterior fixation sutures, medial rectus marginal myotomy, unilateral or bilateral rectus re-recession and resection, unilateral lateral rectus recession and adjustable suture, no standard protocol is established for the surgical style. Different surgical approaches have been recommended for correcting residual or recurrent strabismus. The choice of the surgical procedure depends on the former operation pattern and the surgical dosages applied on the patients, residual or recurrent angle of deviation and the operator''s preference and experience. This review attempts to outline recent publications and current opinion in the management of residual or recurrent esotropia and exotropia.

  20. Recovery of transuranics from process residues

    International Nuclear Information System (INIS)

    Gray, J.H.; Gray, L.W.

    1987-01-01

    Process residues are generated at both the Rocky Flats Plant (RFP) and the Savannah River Plant (SRP) during aqueous chemical and pyrochemical operations. Frequently, process operations will result in either impure products or produce residues sufficiently contaminated with transuranics to be nondiscardable as waste. Purification and recovery flowsheets for process residues have been developed to generate solutions compatible with subsequent Purex operations and either solid or liquid waste suitable for disposal. The ''scrub alloy'' and the ''anode heel alloy'' are examples of materials generated at RFP which have been processed at SRP using the developed recovery flowsheets. Examples of process residues being generated at SRP for which flowsheets are under development include LECO crucibles and alpha-contaminated hydraulic oil

  1. U.S. Isostatic Residual Gravity Grid

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — isores.bin - standard grid containing isostatic residual gravity map for U.S. Grid interval = 4 km. Projection is Albers (central meridian = 96 degrees West; base...

  2. Management of stormwater facility maintenance residuals

    Science.gov (United States)

    1998-06-01

    Current research on stormwater maintenance residuals has revealed that the source and nature of these materials is extremely variable, that regulation can be ambiguous, and handling can be costly and difficult. From a regulatory perspective, data ind...

  3. Residual stresses in Inconel 718 engine disks

    Directory of Open Access Journals (Sweden)

    Dahan Yoann

    2014-01-01

    Full Text Available Aubert&Duval has developed a methodology to establish a residual stress model for Inconel 718 engine discs. To validate the thermal, mechanical and metallurgical parts of the model, trials on lab specimens with specific geometry were carried out. These trials allow a better understanding of the residual stress distribution and evolution during different processes (quenching, ageing, machining. A comparison between experimental and numerical results reveals the residual stresses model accuracy. Aubert&Duval has also developed a mechanical properties prediction model. Coupled with the residual stress prediction model, Aubert&Duval can now propose improvements to the process of manufacturing in Inconel 718 engine disks. This model enables Aubert&Duval customers and subcontractors to anticipate distortions issues during machining. It could also be usedt to optimise the engine disk life.

  4. [Development of residual voltage testing equipment].

    Science.gov (United States)

    Zeng, Xiaohui; Wu, Mingjun; Cao, Li; He, Jinyi; Deng, Zhensheng

    2014-07-01

    For the existing measurement methods of residual voltage which can't turn the power off at peak voltage exactly and simultaneously display waveforms, a new residual voltage detection method is put forward in this paper. First, the zero point of the power supply is detected with zero cross detection circuit and is inputted to a single-chip microcomputer in the form of pulse signal. Secend, when the zero point delays to the peak voltage, the single-chip microcomputer sends control signal to power off the relay. At last, the waveform of the residual voltage is displayed on a principal computer or oscilloscope. The experimental results show that the device designed in this paper can turn the power off at peak voltage and is able to accurately display the voltage waveform immediately after power off and the standard deviation of the residual voltage is less than 0.2 V at exactly one second and later.

  5. Residual extrapolation operators for efficient wavefield construction

    KAUST Repository

    Alkhalifah, Tariq Ali

    2013-01-01

    and smooth media, the residual implementation based on velocity perturbation optimizes the use of this feature. Most of the other implementations based on the spectral approach are focussed on reducing cost by reducing the number of inverse Fourier transforms

  6. Efficient particle filtering through residual nudging

    KAUST Repository

    Luo, Xiaodong

    2013-05-15

    We introduce an auxiliary technique, called residual nudging, to the particle filter to enhance its performance in cases where it performs poorly. The main idea of residual nudging is to monitor and, if necessary, adjust the residual norm of a state estimate in the observation space so that it does not exceed a pre-specified threshold. We suggest a rule to choose the pre-specified threshold, and construct a state estimate accordingly to achieve this objective. Numerical experiments suggest that introducing residual nudging to a particle filter may (substantially) improve its performance, in terms of filter accuracy and/or stability against divergence, especially when the particle filter is implemented with a relatively small number of particles. © 2013 Royal Meteorological Society.

  7. Handling of wet residues in industry

    DEFF Research Database (Denmark)

    Villanueva, Alejandro

    is fundamental in most disposal routes for clarifying the possibility of treating the residue. The better the characterisation from the start is, the easier the assessment of the feasible disposal alternatives becomes. The decision about the handling/disposal solution for the residue is a trade-off between......, and can depend on factors such as the investment capacity, the relationships with the stakeholders, or the promotion of its environmental profile....

  8. Environmental assessment of incinerator residue utilisation

    OpenAIRE

    Toller, Susanna

    2008-01-01

     In Sweden, utilisation of incinerator residues outside disposal areas is restricted by environmental concerns, as such residues commonly contain greater amounts of potentially toxic trace elements than the natural materials they replace. On the other hand, utilisation can also provide environmental benefits by decreasing the need for landfill and reducing raw material extraction. This thesis provides increased knowledge and proposes better approaches for environmental assessment of incinerat...

  9. Fate and Transport of Colloidal Energetic Residues

    Science.gov (United States)

    2015-07-01

    laser confocal microscopy was developed and evaluated. Spectral imaging has been applied widely for chromosome karyotype analysis (61), as well as...Walsh et al. (2010) (55), who reported that the timeframe for complete disappearance of the residues (based on visual inspection) was shorter than...enhanced disappearance of residues is that the particulates produced by precipitation- driven (or even tidal flooding) weathering lead to faster

  10. Environmental dredging residual generation and management.

    Science.gov (United States)

    Patmont, Clay; LaRosa, Paul; Narayanan, Raghav; Forrest, Casey

    2018-05-01

    The presence and magnitude of sediment contamination remaining in a completed dredge area can often dictate the success of an environmental dredging project. The need to better understand and manage this remaining contamination, referred to as "postdredging residuals," has increasingly been recognized by practitioners and investigators. Based on recent dredging projects with robust characterization programs, it is now understood that the residual contamination layer in the postdredging sediment comprises a mixture of contaminated sediments that originate from throughout the dredge cut. This mixture of contaminated sediments initially exhibits fluid mud properties that can contribute to sediment transport and contamination risk outside of the dredge area. This article reviews robust dredging residual evaluations recently performed in the United States and Canada, including the Hudson River, Lower Fox River, Ashtabula River, and Esquimalt Harbour, along with other projects. These data better inform the understanding of residuals generation, leading to improved models of dredging residual formation to inform remedy evaluation, selection, design, and implementation. Data from these projects confirm that the magnitude of dredging residuals is largely determined by site conditions, primarily in situ sediment fluidity or liquidity as measured by dry bulk density. While the generation of dredging residuals cannot be avoided, residuals can be successfully and efficiently managed through careful development and implementation of site-specific management plans. Integr Environ Assess Manag 2018;14:335-343. © 2018 The Authors. Integrated Environmental Assessment and Management Published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC). © 2018 The Authors. Integrated Environmental Assessment and Management Published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

  11. Protein structure based prediction of catalytic residues.

    Science.gov (United States)

    Fajardo, J Eduardo; Fiser, Andras

    2013-02-22

    Worldwide structural genomics projects continue to release new protein structures at an unprecedented pace, so far nearly 6000, but only about 60% of these proteins have any sort of functional annotation. We explored a range of features that can be used for the prediction of functional residues given a known three-dimensional structure. These features include various centrality measures of nodes in graphs of interacting residues: closeness, betweenness and page-rank centrality. We also analyzed the distance of functional amino acids to the general center of mass (GCM) of the structure, relative solvent accessibility (RSA), and the use of relative entropy as a measure of sequence conservation. From the selected features, neural networks were trained to identify catalytic residues. We found that using distance to the GCM together with amino acid type provide a good discriminant function, when combined independently with sequence conservation. Using an independent test set of 29 annotated protein structures, the method returned 411 of the initial 9262 residues as the most likely to be involved in function. The output 411 residues contain 70 of the annotated 111 catalytic residues. This represents an approximately 14-fold enrichment of catalytic residues on the entire input set (corresponding to a sensitivity of 63% and a precision of 17%), a performance competitive with that of other state-of-the-art methods. We found that several of the graph based measures utilize the same underlying feature of protein structures, which can be simply and more effectively captured with the distance to GCM definition. This also has the added the advantage of simplicity and easy implementation. Meanwhile sequence conservation remains by far the most influential feature in identifying functional residues. We also found that due the rapid changes in size and composition of sequence databases, conservation calculations must be recalibrated for specific reference databases.

  12. Ensemble Kalman filtering with residual nudging

    KAUST Repository

    Luo, X.

    2012-10-03

    Covariance inflation and localisation are two important techniques that are used to improve the performance of the ensemble Kalman filter (EnKF) by (in effect) adjusting the sample covariances of the estimates in the state space. In this work, an additional auxiliary technique, called residual nudging, is proposed to monitor and, if necessary, adjust the residual norms of state estimates in the observation space. In an EnKF with residual nudging, if the residual norm of an analysis is larger than a pre-specified value, then the analysis is replaced by a new one whose residual norm is no larger than a pre-specified value. Otherwise, the analysis is considered as a reasonable estimate and no change is made. A rule for choosing the pre-specified value is suggested. Based on this rule, the corresponding new state estimates are explicitly derived in case of linear observations. Numerical experiments in the 40-dimensional Lorenz 96 model show that introducing residual nudging to an EnKF may improve its accuracy and/or enhance its stability against filter divergence, especially in the small ensemble scenario.

  13. Fluorescence imaging to quantify crop residue cover

    Science.gov (United States)

    Daughtry, C. S. T.; Mcmurtrey, J. E., III; Chappelle, E. W.

    1994-01-01

    Crop residues, the portion of the crop left in the field after harvest, can be an important management factor in controlling soil erosion. Methods to quantify residue cover are needed that are rapid, accurate, and objective. Scenes with known amounts of crop residue were illuminated with long wave ultraviolet (UV) radiation and fluorescence images were recorded with an intensified video camera fitted with a 453 to 488 nm band pass filter. A light colored soil and a dark colored soil were used as background for the weathered soybean stems. Residue cover was determined by counting the proportion of the pixels in the image with fluorescence values greater than a threshold. Soil pixels had the lowest gray levels in the images. The values of the soybean residue pixels spanned nearly the full range of the 8-bit video data. Classification accuracies typically were within 3(absolute units) of measured cover values. Video imaging can provide an intuitive understanding of the fraction of the soil covered by residue.

  14. Ensemble Kalman filtering with residual nudging

    Directory of Open Access Journals (Sweden)

    Xiaodong Luo

    2012-10-01

    Full Text Available Covariance inflation and localisation are two important techniques that are used to improve the performance of the ensemble Kalman filter (EnKF by (in effect adjusting the sample covariances of the estimates in the state space. In this work, an additional auxiliary technique, called residual nudging, is proposed to monitor and, if necessary, adjust the residual norms of state estimates in the observation space. In an EnKF with residual nudging, if the residual norm of an analysis is larger than a pre-specified value, then the analysis is replaced by a new one whose residual norm is no larger than a pre-specified value. Otherwise, the analysis is considered as a reasonable estimate and no change is made. A rule for choosing the pre-specified value is suggested. Based on this rule, the corresponding new state estimates are explicitly derived in case of linear observations. Numerical experiments in the 40-dimensional Lorenz 96 model show that introducing residual nudging to an EnKF may improve its accuracy and/or enhance its stability against filter divergence, especially in the small ensemble scenario.

  15. Detecting organic gunpowder residues from handgun use

    Science.gov (United States)

    MacCrehan, William A.; Ricketts, K. Michelle; Baltzersen, Richard A.; Rowe, Walter F.

    1999-02-01

    The gunpowder residues that remain after the use of handguns or improvised explosive devices pose a challenge for the forensic investigator. Can these residues be reliably linked to a specific gunpowder or ammunition? We investigated the possibility by recovering and measuring the composition of organic additives in smokeless powder and its post-firing residues. By determining gunpowder additives such as nitroglycerin, dinitrotoluene, ethyl- and methylcentralite, and diphenylamine, we hope to identify the type of gunpowder in the residues and perhaps to provide evidence of a match to a sample of unfired powder. The gunpowder additives were extracted using an automated technique, pressurized fluid extraction (PFE). The conditions for the quantitative extraction of the additives using neat and solvent-modified supercritical carbon dioxide were investigated. All of the major gunpowder additives can be determined with baseline resolution using capillary electrophoresis (CE) with a micellar agent and UV absorbance detection. A study of candidate internal standards for use in the CE method is also presented. The PFE/CE technique is used to evaluate a new residue sampling protocol--asking shooters to blow their noses. In addition, an initial investigation of the compositional differences among unfired and post-fired .22 handgun residues is presented.

  16. Disposal of leached residual in heap leaching by neutralization

    International Nuclear Information System (INIS)

    Wang Jingmin

    1993-01-01

    The disposal results of leached residual with lime are described. Using the ratio of residual to lime being 100 : 1 the ideal disposal results were obtained with the effluent of the neutralized residual close to neutral

  17. Assessing the Availability of Wood Residues and Residue Markets in Virginia

    OpenAIRE

    Alderman, Delton R. Jr.

    1998-01-01

    A statewide mail survey of primary and secondary wood product manufacturers was undertaken to quantify the production and consumption of wood residues in Virginia. Two hundred and sixty-six wood product manufacturers responded to the study and they provided information on the production, consumption, markets, income or disposal costs, and disposal methods of wood residues. Hardwood and pine sawmills produce approximately 66 percent of Virginia's wood residues. Virginia's wood product man...

  18. A survey of residual analysis and a new test of residual trend.

    Science.gov (United States)

    McDowell, J J; Calvin, Olivia L; Klapes, Bryan

    2016-05-01

    A survey of residual analysis in behavior-analytic research reveals that existing methods are problematic in one way or another. A new test for residual trends is proposed that avoids the problematic features of the existing methods. It entails fitting cubic polynomials to sets of residuals and comparing their effect sizes to those that would be expected if the sets of residuals were random. To this end, sampling distributions of effect sizes for fits of a cubic polynomial to random data were obtained by generating sets of random standardized residuals of various sizes, n. A cubic polynomial was then fitted to each set of residuals and its effect size was calculated. This yielded a sampling distribution of effect sizes for each n. To test for a residual trend in experimental data, the median effect size of cubic-polynomial fits to sets of experimental residuals can be compared to the median of the corresponding sampling distribution of effect sizes for random residuals using a sign test. An example from the literature, which entailed comparing mathematical and computational models of continuous choice, is used to illustrate the utility of the test. © 2016 Society for the Experimental Analysis of Behavior.

  19. Sustainable System for Residual Hazards Management

    International Nuclear Information System (INIS)

    Kevin M. Kostelnik; James H. Clarke; Jerry L. Harbour

    2004-01-01

    Hazardous, radioactive and other toxic substances have routinely been generated and subsequently disposed of in the shallow subsurface throughout the world. Many of today's waste management techniques do not eliminate the problem, but rather only concentrate or contain the hazardous contaminants. Residual hazards result from the presence of hazardous and/or contaminated material that remains on-site following active operations or the completion of remedial actions. Residual hazards pose continued risk to humans and the environment and represent a significant and chronic problem that require continuous long-term management (i.e. >1000 years). To protect human health and safeguard the natural environment, a sustainable system is required for the proper management of residual hazards. A sustainable system for the management of residual hazards will require the integration of engineered, institutional and land-use controls to isolate residual contaminants and thus minimize the associated hazards. Engineered controls are physical modifications to the natural setting and ecosystem, including the site, facility, and/or the residual materials themselves, in order to reduce or eliminate the potential for exposure to contaminants of concern (COCs). Institutional controls are processes, instruments, and mechanisms designed to influence human behavior and activity. System failure can involve hazardous material escaping from the confinement because of system degradation (i.e., chronic or acute degradation) or by external intrusion of the biosphere into the contaminated material because of the loss of institutional control. An ongoing analysis of contemporary and historic sites suggests that the significance of the loss of institutional controls is a critical pathway because decisions made during the operations/remedial action phase, as well as decisions made throughout the residual hazards management period, are key to the long-term success of the prescribed system. In fact

  20. Investigations of the corrosion behaviour of special heat exchanging materials in sodium acetate trihydrate melt for the application latent heat storage; Untersuchungen des Korrosionsverhaltens ausgewaehlter Waermeaustauscherwerkstoffe in Natriumacetat-Trihydrat-Schmelze fuer den Anwendungsfall Latentwaermespeichersysteme

    Energy Technology Data Exchange (ETDEWEB)

    Brandt, B.; Stimming, U. [ZAE Bayern, Walter-Meissner-Str. 6, 87748 Garching (Germany)

    2004-06-01

    die verstaerkte Nutzung der z. T. unregelmaessig anfallenden regenerativen Energien sowie von Abwaerme. Der besondere Vorteil der Latentwaermespeicherung besteht in der hohen Energiespeicherdichte, die bei ausgewaehlten Speichermaterialien am Schmelzpunkt erreicht werden kann, und die daraus resultierende Platzeinsparung sowie die nahezu konstante Temperatur. Eine wesentliche Aufgabe bei der Entwicklung solcher Speichersysteme ist die Erhoehung der Langzeitstabilitaet, speziell die Korrosionsstabilitaet ausreichend waermeleitfaehiger Metalle, die als Waermeaustauschermaterial verwendet werden. Das Waermeaustauschermaterial hat dabei die Funktion, die Waerme oder Kaelte von einem Waermeuebertragungsmedium, z. B. Wasser, das die Energie von einer externen Quelle aufgenommen hat, auf das Speichermaterial zu uebertragen. Bei den Speichermaterialien hat sich das Natriumacetetat-Trihydrat mit einem Schmelzpunkt von 58 C als besonders vorteilhaft erwiesen. Eine wichtige Aufgabe war daher die Untersuchung des Korrosionsverhaltens und die Ableitung geeigneter Waermeaustauschermaterialien. Im vorliegenden Beitrag werden wichtige Ergebnisse der Untersuchung ausgewaehlter Metalle bei 80 C in Natriumacetat-Trihydrat-Schmelze vorgestellt. Dem analysenreinen Natriumacetat-Trihydrat wurden ausserdem gezielt die korrosionsbeeinflussenden Verunreinigungen Chlorid, Sulfat und Karbonat, die im wesentlich preisguenstigeren Salzhydrat technischer Qualitaet vorkommen koennen, zugesetzt. Darueber hinaus wurde der Zusatz von Grafit (zur Erhoehung der Waermeleitfaehigkeit) sowie der Zutritt von Luft untersucht. Aus den Untersuchungen wurden mehrere, fuer den genannten Anwendungsfall besonders aussichtsreiche Metalle abgeleitet. (Abstract Copyright [2004], Wiley Periodicals, Inc.)

  1. Full scale application of the autotrophic denitrification in trickling filters for treatment of rejection water with high ammonia concentrations from sludge dewatering. Final report; Untersuchungen zur autotrophen Stickstoffentfernung aus ammoniumreichem Filtratwasser der Schlammentwaesserung mit grosstechnischer Realisierung in Tropfkoerpern. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Neumueller, B.; Metzger, J.W.; Pinnekamp, J.

    2003-07-01

    strictly. In a semi-technical anammox-reactor which was operated for several years showed, that the process is very robust. Performance loss is only temporary, if the operating conditions aren't fulfilled. (orig.) [German] Bei kommunalen Klaeranlagen mit anaerober Schlammbehandlung faellt bei der Entwaesserung des stabilisierten Schlammes stark ammoniumhaltiges Prozesswasser an. Die Mitbehandlung dieses Teilstroms aus der Schlammbehandlung in der Hauptstrombiologie der Klaeranlage kann zu einer Erhoehung der Stickstoffbelastung von bis zu 20% fuehren. Eine separate Behandlung von Prozesswaessern kann die Stickstoff-Ablaufwerte verbessern und schafft Reserven in der Hauptstrombiologie. Die autotrophe Denitrifikation nach vorangegangener Teilnitritation in Tropfkoerpern ist ein neuartiges Verfahren zur Behandlung hoch ammoniumhaltiger Abwaesser. Hierzu werden in einem ersten Tropfkoerper etwa 60% des Ammoniums zu Nitrit umgewandelt, wobei die Nitratation gehemmt wird. In einem zweiten geschlossenen Tropfkoerper wird das Ammonium unter anoxischen Bedingungen, mit Nitrit als Elektronenakzeptor, zu molekularem Stickstoff oxidiert. Dieses Verfahren wurde erstmals im grosstechnischen Betrieb auf der Klaeranlage Sindelfingen realisiert. Die Untersuchungen zeigten, dass bereits wenige mg/l Ammoniak im ersten Reaktor ausreichten, um die Nitratation zu hemmen. Da die Nitratation nach einem Anstieg und dem darauffolgenden Abfallen der Ammoniakkonzentration zunahm, fand offensichtlich eine Adaption der Biomasse an die hoeheren Ammoniakgehalte statt. Deshalb sollte die Ammoniakkonzentration moeglichst konstant gehalten und groessere Schwankungen ueber eine laengere Zeit vermieden werden. Nur mit der thermischen Abtoetung der Mikroorganismen und dem erneuten Einfahren des Prozesses konnte nach einer Adaption wieder eine vollstaendige Nitratationshemmung bei geringen Ammoniakkonzentrationen gewaehrleistet werden. Durch die aeusserst geringe Wachstumsrate der Anammoxbakterien nimmt

  2. Study in environmental medicine in the areas of Bitterfeld and Hettstedt and a comparison area, 1995 - 1996. Data Book; Umweltmedizinische Untersuchungen im Raum Bitterfeld, im Raum Hettstedt und einem Vergleichsgebiet 1995-1996. Data Book

    Energy Technology Data Exchange (ETDEWEB)

    Heinrich, J.; Jacob, B.; Hoelscher, B.; Wilde, B.; Wolff, H.; Wjst, M.; Cyrys, J.; Wichmann, H.E. [GSF - Forschungszentrum fuer Umwelt und Gesundheit Neuherberg GmbH, Oberschleissheim (Germany). Inst. fuer Epidemiologie

    1998-10-01

    were determined and heavy-metal analyses carried out. Complete blood tests were done for lead, cadmium and mercury; urine tests were done for arsenic, cadmium and mercury. (orig.) [Deutsch] Die Umweltsituation im industriellen Ballungsgebiet Bitterfeld/Wolfen war in der Vergangenheit durch eine ausserordentlich hohe Belastung der Luft, u.a. mit Staeuben, Schwefeldioxid, Stickoxiden und chlorierten Kohlenwasserstoffen, der Gewaesser und des Bodens gekennzeichnet. Dagegen spielte im Raum Hettstedt die Schwermetallbelastung durch jahrzehntelangen Bergbau und die Emissionen der buntmetallurgischen Industriebetriebe die Hauptrolle. Ziel der vom Umweltbundesamt gefoerderten umweltepidemiologischen Studie ist es, moegliche gesundheitliche Beeintraechtigungen der Bevoelkerung in diesen zwei Belastungsgebieten im Vergleich zu dem wenig belasteten Kontrollterritorium Zerbst zu ermitteln. Diese sollen vor dem Hintergrund der Langzeitwirkung einer hohen Luftbelastung in den Regionen Bitterfeld und Hettstedt quantifiziert werden. Darueber hinaus werden die zeitlichen Veraenderungen der Gesundheitsparameter begleitend zu den laufenden Sanierungsmassnahmen ueber einen Zeitraum von 6 Jahren erfasst, um die Sanierung an den gesundheitlichen Gegebenheiten ausrichten zu koennen. Die Untersuchungen 1995/96 erfolgten wie auch beim 1. Survey im Jahre 1992/93 durch Aerzte und Schwestern in Schulen, Kindergaerten, Gesundheitsaemtern sowie teilweise in einem mit Lungenfunktionsgeraeten ausgestatteten Untersuchungsbus. In allen drei Orten wurde nach den gleichen standardisierten Vorschriften verfahren, wobei die gleichen Geraete und die gleichen Untersucher im Einsatz waren. Durch Befragung der Eltern der Kinder wurden Informationen erhoben zu Erkrankungen und Symptomen, insbesondere zu Atemwegserkrankungen und Allergien, sowie zu soziodemographischen Charakteristika und Merkmalen der haeuslichen Umgebung, welche die interessierenden Zielgroessen mitbeeinflussen koennen. Es wurde die

  3. Pesticide residues in birds and mammals

    Science.gov (United States)

    Stickel, L.F.; Edwards, C.A.

    1973-01-01

    SUMMARY: Residues of organochlorine pesticides and their breakdown products are present in the tissues of essentially all wild birds throughout the world. These chemicals accumulate in fat from a relatively small environmental exposure. DDE and dieldrin are most prevalent. Others, such as heptachlor epoxide, chlordane, endrin, and benzene hexachloride also occur, the quantities and kinds generally reflecting local or regional use. Accumulation may be sufficient to kill animals following applications for pest control. This has occurred in several large-scale programmes in the United States. Mortality has also resulted from unintentional leakage of chemical from commercial establishments. Residues may persist in the environment for many years, exposing successive generations of animals. In general, birds that eat other birds, or fish, have higher residues than those that eat seeds and vegetation. The kinetic processes of absorption, metabolism, storage, and output differ according to both kind of chemical and species of animal. When exposure is low and continuous, a balance between intake and excretion may be achieved. Residues reach a balance at an approximate animal body equilibrium or plateau; the storage is generally proportional to dose. Experiments with chickens show that dieldrin and heptachlor epoxide have the greatest propensity for storage, endrin next, then DDT, then lindane. The storage of DDT was complicated by its metabolism to DDE and DDD, but other studies show that DDE has a much greater propensity for storage than either DDD or DDT. Methoxychlor has little cumulative capacity in birds. Residues in eggs reflect and parallel those in the parent bird during accumulation, equilibrium, and decline when dosage is discontinued. Residues with the greatest propensity for storage are also lost most slowly. Rate of loss of residues can be modified by dietary components and is speeded by weight loss of the animal. Under sublethal conditions of continuous

  4. Disposal of Rocky Flats residues as waste

    International Nuclear Information System (INIS)

    Dustin, D.F.; Sendelweck, V.S.

    1993-01-01

    Work is underway at the Rocky Flats Plant to evaluate alternatives for the removal of a large inventory of plutonium-contaminated residues from the plant. One alternative under consideration is to package the residues as transuranic wastes for ultimate shipment to the Waste Isolation Pilot Plant. Current waste acceptance criteria and transportation regulations require that approximately 1000 cubic yards of residues be repackaged to produce over 20,000 cubic yards of WIPP certified waste. The major regulatory drivers leading to this increase in waste volume are the fissile gram equivalent, surface radiation dose rate, and thermal power limits. In the interest of waste minimization, analyses have been conducted to determine, for each residue type, the controlling criterion leading to the volume increase, the impact of relaxing that criterion on subsequent waste volume, and the means by which rules changes may be implemented. The results of this study have identified the most appropriate changes to be proposed in regulatory requirements in order to minimize the costs of disposing of Rocky Flats residues as transuranic wastes

  5. Reclamation of plutonium from pyrochemical processing residues

    International Nuclear Information System (INIS)

    Gray, L.W.; Gray, J.H.; Holcomb, H.P.; Chostner, D.F.

    1987-04-01

    Savannah River Laboratory (SRL), Savannah River Plant (SRP), and Rocky Flats Plant (RFP) have jointly developed a process to recover plutonium from molten salt extraction residues. These NaCl, KCL, and MgCl 2 residues, which are generated in the pyrochemical extraction of 241 Am from aged plutonium metal, contain up to 25 wt % dissolved plutonium and up to 2 wt % americium. The overall objective was to develop a process to convert these residues to a pure plutonium metal product and discardable waste. To meet this objective a combination of pyrochemical and aqueous unit operations was used. The first step was to scrub the salt residue with a molten metal (aluminum and magnesium) to form a heterogeneous ''scrub alloy'' containing nominally 25 wt % plutonium. This unit operation, performed at RFP, effectively separated the actinides from the bulk of the chloride salts. After packaging in aluminum cans, the ''scrub alloy'' was then dissolved in a nitric acid - hydrofluoric acid - mercuric nitrate solution at SRP. Residual chloride was separated from the dissolver solution by precipitation with Hg 2 (NO 3 ) 2 followed by centrifuging. Plutonium was then separated from the aluminum, americium and magnesium using the Purex solvent extraction system. The 241 Am was diverted to the waste tank farm, but could be recovered if desired

  6. Rare Earth Element Phases in Bauxite Residue

    Directory of Open Access Journals (Sweden)

    Johannes Vind

    2018-02-01

    Full Text Available The purpose of present work was to provide mineralogical insight into the rare earth element (REE phases in bauxite residue to improve REE recovering technologies. Experimental work was performed by electron probe microanalysis with energy dispersive as well as wavelength dispersive spectroscopy and transmission electron microscopy. REEs are found as discrete mineral particles in bauxite residue. Their sizes range from <1 μm to about 40 μm. In bauxite residue, the most abundant REE bearing phases are light REE (LREE ferrotitanates that form a solid solution between the phases with major compositions (REE,Ca,Na(Ti,FeO3 and (Ca,Na(Ti,FeO3. These are secondary phases formed during the Bayer process by an in-situ transformation of the precursor bauxite LREE phases. Compared to natural systems, the indicated solid solution resembles loparite-perovskite series. LREE particles often have a calcium ferrotitanate shell surrounding them that probably hinders their solubility. Minor amount of LREE carbonate and phosphate minerals as well as manganese-associated LREE phases are also present in bauxite residue. Heavy REEs occur in the same form as in bauxites, namely as yttrium phosphates. These results show that the Bayer process has an impact on the initial REE mineralogy contained in bauxite. Bauxite residue as well as selected bauxites are potentially good sources of REEs.

  7. Mobility of organic carbon from incineration residues

    International Nuclear Information System (INIS)

    Ecke, Holger; Svensson, Malin

    2008-01-01

    Dissolved organic carbon (DOC) may affect the transport of pollutants from incineration residues when landfilled or used in geotechnical construction. The leaching of dissolved organic carbon (DOC) from municipal solid waste incineration (MSWI) bottom ash and air pollution control residue (APC) from the incineration of waste wood was investigated. Factors affecting the mobility of DOC were studied in a reduced 2 6-1 experimental design. Controlled factors were treatment with ultrasonic radiation, full carbonation (addition of CO 2 until the pH was stable for 2.5 h), liquid-to-solid (L/S) ratio, pH, leaching temperature and time. Full carbonation, pH and the L/S ratio were the main factors controlling the mobility of DOC in the bottom ash. Approximately 60 weight-% of the total organic carbon (TOC) in the bottom ash was available for leaching in aqueous solutions. The L/S ratio and pH mainly controlled the mobilization of DOC from the APC residue. About 93 weight-% of TOC in the APC residue was, however, not mobilized at all, which might be due to a high content of elemental carbon. Using the European standard EN 13 137 for determination of total organic carbon (TOC) in MSWI residues is inappropriate. The results might be biased due to elemental carbon. It is recommended to develop a TOC method distinguishing between organic and elemental carbon

  8. [Migrants from disposable gloves and residual acrylonitrile].

    Science.gov (United States)

    Wakui, C; Kawamura, Y; Maitani, T

    2001-10-01

    Disposable gloves made from polyvinyl chloride with and without di(2-ethylhexyl) phthalate (PVC-DEHP, PVC-NP), polyethylene (PE), natural rubber (NR) and nitrile-butadiene rubber (NBR) were investigated with respect to evaporation residue, migrated metals, migrants and residual acrylonitrile. The evaporation residue found in n-heptane was 870-1,300 ppm from PVC-DEHP and PVC-NP, which was due to the plasticizers. Most of the PE gloves had low evaporation residue levels and migrants, except for the glove designated as antibacterial, which released copper and zinc into 4% acetic acid. For the NR and NBR gloves, the evaporation residue found in 4% acetic acid was 29-180 ppm. They also released over 10 ppm of calcium and 6 ppm of zinc into 4% acetic acid, and 1.68-8.37 ppm of zinc di-ethyldithiocarbamate and zinc di-n-butyldithiocarbamate used as vulcanization accelerators into n-heptane. The acrylonitrile content was 0.40-0.94 ppm in NBR gloves.

  9. New applications of partial residual methodology

    International Nuclear Information System (INIS)

    Uslu, V.R.

    1999-12-01

    The formulation of a problem of interest in the framework of a statistical analysis starts with collecting the data, choosing a model, making certain assumptions as described in the basic paradigm by Box (1980). This stage is is called model building. Then the estimation stage is in order by pretending as if the formulation of the problem was true to obtain estimates, to make tests and inferences. In the final stage, called diagnostic checking, checking of whether there are some disagreements between the data and the model fitted is done by using diagnostic measures and diagnostic plots. It is well known that statistical methods perform best under the condition that all assumptions related to the methods are satisfied. However it is true that having the ideal case in practice is very difficult. Diagnostics are therefore becoming important so are diagnostic plots because they provide a immediate assessment. Partial residual plots that are the main interest of the present study are playing the major role among the diagnostic plots in multiple regression analysis. In statistical literature it is admitted that partial residual plots are more useful than ordinary residual plots in detecting outliers, nonconstant variance, and especially discovering curvatures. In this study we consider the partial residual methodology in statistical methods rather than multiple regression. We have shown that for the same purpose as in the multiple regression the use of partial residual plots is possible particularly in autoregressive time series models, transfer function models, linear mixed models and ridge regression. (author)

  10. Residual gravimetric method to measure nebulizer output.

    Science.gov (United States)

    Vecellio None, Laurent; Grimbert, Daniel; Bordenave, Joelle; Benoit, Guy; Furet, Yves; Fauroux, Brigitte; Boissinot, Eric; De Monte, Michele; Lemarié, Etienne; Diot, Patrice

    2004-01-01

    The aim of this study was to assess a residual gravimetric method based on weighing dry filters to measure the aerosol output of nebulizers. This residual gravimetric method was compared to assay methods based on spectrophotometric measurement of terbutaline (Bricanyl, Astra Zeneca, France), high-performance liquid chromatography (HPLC) measurement of tobramycin (Tobi, Chiron, U.S.A.), and electrochemical measurements of NaF (as defined by the European standard). Two breath-enhanced jet nebulizers, one standard jet nebulizer, and one ultrasonic nebulizer were tested. Output produced by the residual gravimetric method was calculated by weighing the filters both before and after aerosol collection and by filter drying corrected by the proportion of drug contained in total solute mass. Output produced by the electrochemical, spectrophotometric, and HPLC methods was determined after assaying the drug extraction filter. The results demonstrated a strong correlation between the residual gravimetric method (x axis) and assay methods (y axis) in terms of drug mass output (y = 1.00 x -0.02, r(2) = 0.99, n = 27). We conclude that a residual gravimetric method based on dry filters, when validated for a particular agent, is an accurate way of measuring aerosol output.

  11. Incorporation feasibility of leather residues in bricks

    Energy Technology Data Exchange (ETDEWEB)

    Aguiar, J.B. [Minho Univ. (Portugal). Civil Engineering Dept.; Valente, A.; Pires, M.J. [Inst. of Development and Innovation Technology of Minho, Braga (Portugal); Tavares, T. [Biological Engineering Dept., Univ. of Minho, Braga (Portugal)

    2002-07-01

    The footwear industry has strips of leather as one of its by-products. These leather residues, due to their high chromium content, can be regarded as a threat to the environment, particularly if no care is taken with their disposal. With the incorporation of the residues in ceramic products, after trituration, is possible to neutralise the eventual toxicity of chromium. In a laboratory study we produced prismatic bricks using clay from the region and incorporating 1, 3 and 5% (by mass) of leather residues. This corresponds at about 20, 60 and 100% (by apparent volume). The moulds were filled up with paste and, in order to have some compactness, the ceramic paste was compressed with a spatula. After that, it began the process of drying and burning the bricks. They were tested to flexure, compression and leaching. The results showed that the toxicity of chromium disappeared in the bricks. The mechanical tests showed a decrease in strength for the specimens with leather residue. The compressive strength decreases about 22% for 1% of incorporation of leather residue. However, as bricks were lighter and more porous, we can expect that they are better for thermal isolation. (orig.)

  12. Methods of measuring residual stresses in components

    International Nuclear Information System (INIS)

    Rossini, N.S.; Dassisti, M.; Benyounis, K.Y.; Olabi, A.G.

    2012-01-01

    Highlights: ► Defining the different methods of measuring residual stresses in manufactured components. ► Comprehensive study on the hole drilling, neutron diffraction and other techniques. ► Evaluating advantage and disadvantage of each method. ► Advising the reader with the appropriate method to use. -- Abstract: Residual stresses occur in many manufactured structures and components. Large number of investigations have been carried out to study this phenomenon and its effect on the mechanical characteristics of these components. Over the years, different methods have been developed to measure residual stress for different types of components in order to obtain reliable assessment. The various specific methods have evolved over several decades and their practical applications have greatly benefited from the development of complementary technologies, notably in material cutting, full-field deformation measurement techniques, numerical methods and computing power. These complementary technologies have stimulated advances not only in measurement accuracy and reliability, but also in range of application; much greater detail in residual stresses measurement is now available. This paper aims to classify the different residual stresses measurement methods and to provide an overview of some of the recent advances in this area to help researchers on selecting their techniques among destructive, semi destructive and non-destructive techniques depends on their application and the availabilities of those techniques. For each method scope, physical limitation, advantages and disadvantages are summarized. In the end this paper indicates some promising directions for future developments.

  13. Drug and chemical residues in domestic animals.

    Science.gov (United States)

    Mussman, H C

    1975-02-01

    Given the large number of chemical substances that may find their way into the food supply, a system is needed to monitor their presence. The U. S. Department of Agriculture's Meat and Poultry Inspection Program routinely tests for chemical residues in animals coming to slaughter. Pesticides, heavy metals, growth promotants (hormones and hormonelike agents), and antibiotics are included. Samples are taken statistically so that inferences as to national incidence of residues can be drawn. When a problem is identified, a more selective sampling is designed to help follow up on the initial regulatory action. In testing for pesticides, only DDT and dieldrin are found with any frequency and their levels are decreasing; violative residues of any chlorinated hydrocarbon are generally a result of an industrial accident rather than agricultural usage. Analyses for heavy metals have revealed detectable levels of mercury, lead, and others, but none at levels that are considered a health hazard. Of the hormone or hormonelike substances, only diethylstilbestrol has been a residue problem and its future is uncertain. The most extensive monitoring for veterinary drugs is on the antimicrobials, including sulfonamides, streptomycin, and the tetracycline group of antibiotics that constitute the bulk of the violations; their simultaneous use prophylactically and therapeutically has contributed to the problem in certain cases. A strong, well-designed user education program on proper application of pesticides, chemicals, and veterinary drugs appears to be one method of reducing the incidence of unwanted residues.

  14. 77 FR 24671 - Compliance Guide for Residue Prevention and Agency Testing Policy for Residues

    Science.gov (United States)

    2012-04-25

    ... Hazard Analysis and Critical Control Points (HACCP) inspection system, another important component of the NRP is to provide verification of residue control in HACCP systems. As part of the HACCP regulation... guide, and FSIS finds violative residues, the establishment's HACCP system may be inadequate under 9 CFR...

  15. Improved crop residue cover estimates by coupling spectral indices for residue and moisture

    Science.gov (United States)

    Remote sensing assessment of soil residue cover (fR) and tillage intensity will improve our predictions of the impact of agricultural practices and promote sustainable management. Spectral indices for estimating fR are sensitive to soil and residue water content, therefore, the uncertainty of estima...

  16. Distribution of Penicillin G Residues in Culled Dairy Cow Muscles: Implications for Residue Monitoring

    Science.gov (United States)

    The U.S. Food and Drug Administration sets tolerances for veterinary drug residues in muscle, but does not specify which type of muscle should be analyzed. In order to determine if antibiotic residue levels are dependent on muscle type, 7 culled dairy cows were dosed with Penicillin G (Pen G) from ...

  17. Methyl bromide residues in fumigated cocoa beans

    International Nuclear Information System (INIS)

    Adomako, D.

    1975-01-01

    The 14 C activity in unroasted [ 14 C]-methyl bromide fumigated cocoa beans was used to study the fate and persistence of CH 3 Br in the stored beans. About 70% of the residues occurred in the shells. Unchanged CH 3 Br could not be detected, all the sorbed CH 3 Br having reacted with bean constituents apparently to form 14 C-methylated derivatives and inorganic bromide. No 14 C activity was found in the lipid fraction. Roasting decreased the bound (non-volatile) residues, with corresponding changes in the activities and amounts of free sugars, free and protein amino acids. Roasted nibs and shells showed a two-fold increase in the volatile fraction of the 14 C residue. This fraction may be related to the volatile aroma compounds formed by Maillard-type reactions. (author)

  18. Residual-strength determination in polymetric materials

    Energy Technology Data Exchange (ETDEWEB)

    Christensen, R.M.

    1981-10-01

    Kinetic theory of crack growth is used to predict the residual strength of polymetric materials acted upon by a previous history. Specifically, the kinetic theory is used to characterize the state of growing damage that occurs under a constant-stress (load) state. The load is removed before failure under creep-rupture conditions, and the residual instantaneous strength is determined from the theory by taking account of the damage accumulation under the preceding constant-load history. The rate of change of residual strength is found to be strongest when the duration of the preceding load history is near the ultimate lifetime under that condition. Physical explanations for this effect are given, as are numerical examples. Also, the theoretical prediction is compared with experimental data.

  19. Management of municipal solid waste incineration residues

    International Nuclear Information System (INIS)

    Sabbas, T.; Polettini, A.; Pomi, R.; Astrup, T.; Hjelmar, O.; Mostbauer, P.; Cappai, G.; Magel, G.; Salhofer, S.; Speiser, C.; Heuss-Assbichler, S.; Klein, R.; Lechner, P.

    2003-01-01

    The management of residues from thermal waste treatment is an integral part of waste management systems. The primary goal of managing incineration residues is to prevent any impact on our health or environment caused by unacceptable particulate, gaseous and/or solute emissions. This paper provides insight into the most important measures for putting this requirement into practice. It also offers an overview of the factors and processes affecting these mitigating measures as well as the short- and long-term behavior of residues from thermal waste treatment under different scenarios. General conditions affecting the emission rate of salts and metals are shown as well as factors relevant to mitigating measures or sources of gaseous emissions

  20. Residual strains in girth-welded linepipe

    International Nuclear Information System (INIS)

    MacEwen, S.R.; Holden, T.M.; Powell, B.M.; Lazor, R.B.

    1987-07-01

    High resolution neutron diffraction has been used to measure the axial residual strains in and adjacent to a multipass girth weld in a complete section of 914 mm (36 inches) diameter, 16 mm (5/8 inch) wall, linepipe. The experiments were carried out at the NRU reactor, Chalk River using the L3 triple-axis spectrometer. The through-wall distribution of axial residual strain was measured at 0, 4, 8, 20 and 50 mm from the weld centerline; the axial variation was determined 1, 5, 8, and 13 mm from the inside surface of the pipe wall. The results have been compared with strain gauge measurements on the weld surface and with through-wall residual stress distributions determined using the block-layering and removal technique

  1. Residual-strength determination in polymetric materials

    International Nuclear Information System (INIS)

    Christensen, R.M.

    1981-01-01

    Kinetic theory of crack growth is used to predict the residual strength of polymetric materials acted upon by a previous history. Specifically, the kinetic theory is used to characterize the state of growing damage that occurs under a constant-stress (load) state. The load is removed before failure under creep-rupture conditions, and the residual instantaneous strength is determined from the theory by taking account of the damage accumulation under the preceding constant-load history. The rate of change of residual strength is found to be strongest when the duration of the preceding load history is near the ultimate lifetime under that condition. Physical explanations for this effect are given, as are numerical examples. Also, the theoretical prediction is compared with experimental data

  2. Residual Defect Density in Random Disks Deposits.

    Science.gov (United States)

    Topic, Nikola; Pöschel, Thorsten; Gallas, Jason A C

    2015-08-03

    We investigate the residual distribution of structural defects in very tall packings of disks deposited randomly in large channels. By performing simulations involving the sedimentation of up to 50 × 10(9) particles we find all deposits to consistently show a non-zero residual density of defects obeying a characteristic power-law as a function of the channel width. This remarkable finding corrects the widespread belief that the density of defects should vanish algebraically with growing height. A non-zero residual density of defects implies a type of long-range spatial order in the packing, as opposed to only local ordering. In addition, we find deposits of particles to involve considerably less randomness than generally presumed.

  3. Determination of Pesticide Residues in Cannabis Smoke

    Directory of Open Access Journals (Sweden)

    Nicholas Sullivan

    2013-01-01

    Full Text Available The present study was conducted in order to quantify to what extent cannabis consumers may be exposed to pesticide and other chemical residues through inhaled mainstream cannabis smoke. Three different smoking devices were evaluated in order to provide a generalized data set representative of pesticide exposures possible for medical cannabis users. Three different pesticides, bifenthrin, diazinon, and permethrin, along with the plant growth regulator paclobutrazol, which are readily available to cultivators in commercial products, were investigated in the experiment. Smoke generated from the smoking devices was condensed in tandem chilled gas traps and analyzed with gas chromatography-mass spectrometry (GC-MS. Recoveries of residues were as high as 69.5% depending on the device used and the component investigated, suggesting that the potential of pesticide and chemical residue exposures to cannabis users is substantial and may pose a significant toxicological threat in the absence of adequate regulatory frameworks.

  4. Bioenergy from agricultural residues in Ghana

    DEFF Research Database (Denmark)

    Thomsen, Sune Tjalfe

    and biomethane under Ghanaian conditions. Detailed characterisations of thirteen of the most common agricultural residues in Ghana are presented, enabling estimations of theoretical bioenergy potentials and identifying specific residues for future biorefinery applications. When aiming at residue-based ethanol...... to pursue increased implementation of anaerobic digestion in Ghana, as the first bioenergy option, since anaerobic digestion is more flexible than ethanol production with regard to both feedstock and scale of production. If possible, the available manure and municipal liquid waste should be utilised first....... A novel model for estimating BMP from compositional data of lignocellulosic biomasses is derived. The model is based on a statistical method not previously used in this area of research and the best prediction of BMP is: BMP = 347 xC+H+R – 438 xL + 63 DA , where xC+H+R is the combined content of cellulose...

  5. Mutational properties of amino acid residues: implications for evolvability of phosphorylatable residues

    DEFF Research Database (Denmark)

    Creixell, Pau; Schoof, Erwin M.; Tan, Chris Soon Heng

    2012-01-01

    in terms of their mutational activity. Moreover, we highlight the importance of the genetic code and physico-chemical properties of the amino acid residues as likely causes of these inequalities and uncover serine as a mutational hot spot. Finally, we explore the consequences that these different......; it is typically assumed that all amino acid residues are equally likely to mutate or to result from a mutation. Here, by reconstructing ancestral sequences and computing mutational probabilities for all the amino acid residues, we refute this assumption and show extensive inequalities between different residues...... mutational properties have on phosphorylation site evolution, showing that a higher degree of evolvability exists for phosphorylated threonine and, to a lesser extent, serine in comparison with tyrosine residues. As exemplified by the suppression of serine's mutational activity in phosphorylation sites, our...

  6. Residual generator for cardiovascular anomalies detection

    KAUST Repository

    Belkhatir, Zehor

    2014-06-01

    This paper discusses the possibility of using observer-based approaches for cardiovascular anomalies detection and isolation. We consider a lumped parameter model of the cardiovascular system that can be written in a form of nonlinear state-space representation. We show that residuals that are sensitive to variations in some cardiovascular parameters and to abnormal opening and closure of the valves, can be generated. Since the whole state is not easily available for measurement, we propose to associate the residual generator to a robust extended kalman filter. Numerical results performed on synthetic data are provided.

  7. Lindane residues in fish inhabiting Nigerian rivers

    International Nuclear Information System (INIS)

    Okereke, G.U.; Dje, Y.

    1997-01-01

    Analysis for residues of lindane in fish collected from various rivers close to rice agroecosystems showed that the concentrations of lindane ranged from none detectable to 3.4 mg kg -1 . Fish from rivers where strict regulations prohibits its use had no detectable lindane residues while appreciable amounts of lindane were found in fish were such restriction was not enforced with the variation attributed to the extent of use of lindane in the area of contamination. The investigation confirms that the use of lindane in rice production in Nigeria can cause the contamination of fish in nearby rivers. (author). 16 refs, 2 tab

  8. Fluidised-bed combustion of gasification residue

    Energy Technology Data Exchange (ETDEWEB)

    Korpela, T.; Kudjoi, A.; Hippinen, I.; Heinolainen, A.; Suominen, M.; Lu Yong [Helsinki Univ. of Technology (Finland). Lab of Energy Economics and Power Plant Engineering

    1996-12-01

    Partial gasification processes have been presented as possibilities for future power production. In the processes, the solid materials removed from a gasifier (i.e. fly ash and bed material) contain unburnt fuel and the fuel conversion is increased by burning this gasification residue either in an atmospheric or a pressurised fluidised-bed. In this project, which is a part of European JOULE 2 EXTENSION research programme, the main research objectives are the behaviour of calcium and sulphur compounds in solids and the emissions of sulphur dioxide and nitrogen oxides (NO{sub x} and N{sub 2}O) in pressurised fluidised-bed combustion of gasification residues. (author)

  9. Fate of leptophos residues in milk products

    International Nuclear Information System (INIS)

    Zayed, S.M.A.D.; Mohammed, S.I.

    1981-01-01

    The fate of leptophos residues in various milk products was studied using 14 C-phenyl labelled leptophos. Milk products were prepared from milk fortified with the radioactive insecticide by methods simulating those used in industry. The highest leptophos level was found in butter and the lowest in skim milk and whey. Analysis of the radioactive residues in all products showed the presence of leptophos alone. A trace of the oxon could be detected in whey. The results obtained in this investigation indicated that processing of milk did not affect the nature of leptophos to any appreciable extent. (author)

  10. Residual stress in Ni-W electrodeposits

    DEFF Research Database (Denmark)

    Mizushima, Io; Tang, Peter Torben; Hansen, Hans Nørgaard

    2006-01-01

    In the present work, the residual stress in Ni–W layers electrodeposited from electrolytes based on NiSO4 and Na2WO4, is investigated. Citrate, glycine and triethanolamine were used as complexing agents, enabling complex formation between the nickel ion and tungstate. The results show that the type...... of complexing agent and the current efficiency have an influence on the residual stress. In all cases, an increase in tensile stress in the deposit with time after deposition was observed. Pulse plating could improve the stress level for the electrolyte containing equal amounts of citrate...

  11. Residual radioactivity of treated green diamonds.

    Science.gov (United States)

    Cassette, Philippe; Notari, Franck; Lépy, Marie-Christine; Caplan, Candice; Pierre, Sylvie; Hainschwang, Thomas; Fritsch, Emmanuel

    2017-08-01

    Treated green diamonds can show residual radioactivity, generally due to immersion in radium salts. We report various activity measurements on two radioactive diamonds. The activity was characterized by alpha and gamma ray spectrometry, and the radon emanation was measured by alpha counting of a frozen source. Even when no residual radium contamination can be identified, measurable alpha and high-energy beta emissions could be detected. The potential health impact of radioactive diamonds and their status with regard to the regulatory policy for radioactive products are discussed. Copyright © 2017. Published by Elsevier Ltd.

  12. Residual water treatment for gamma radiation

    International Nuclear Information System (INIS)

    Mendez, L.

    1990-01-01

    The treatment of residual water by means of gamma radiation for its use in agricultural irrigation is evaluated. Measurements of physical, chemical, biological and microbiological contamination indicators were performed. For that, samples from the treatment center of residual water of San Juan de Miraflores were irradiated up to a 52.5 kGy dose. The study concludes that gamma radiation is effective to remove parasites and bacteria, but not for removal of the organic and inorganic matter. (author). 15 refs., 3 tabs., 4 figs

  13. Some problems of residual activity measurements

    International Nuclear Information System (INIS)

    Katrik, P.; Mustafin, E.; Strasik, I.; Pavlovic, M.

    2013-01-01

    As a preparatory work for constructing the Facility for Antiproton and Ion Research (FAIR) at GSI Darmstadt, samples of copper were irradiated by 500 MeV/u 238 U ion beam and investigated by gamma-ray spectroscopy. The nuclides that contribute dominantly to the residual activity have been identified and their contributions have been quantified by two different methods: from the whole-target gamma spectra and by integration of depth-profiles of residual activity of individual nuclides. Results obtained by these two methods are compared and discussed in this paper. (authors)

  14. Color center formation in plutonium electrorefining residues

    International Nuclear Information System (INIS)

    Morris, D.E.; Eller, P.G.; Hobart, D.E.; Eastman, M.P.; McCurry, L.E.

    1989-01-01

    Plutonium electrorefining residues containing Pu(III) in KCl exhibit dramatic reversible, light-induced color changes. Similar color changes were observed in Ln-doped (Ln = La, Nd, Gd, and Lu) and undoped KCl samples which were subjected to intense gamma irradiation. Diffuse reflectance electronic and electron paramagnetic resonance spectroscopies were used to show conclusively that Pu(III) is present in both the bleached and unbleached plutonium-bearing residues and the spectacular color changes are the result of color center formation and alternation by visible light. (orig.)

  15. Residual and Destroyed Accessible Information after Measurements

    Science.gov (United States)

    Han, Rui; Leuchs, Gerd; Grassl, Markus

    2018-04-01

    When quantum states are used to send classical information, the receiver performs a measurement on the signal states. The amount of information extracted is often not optimal due to the receiver's measurement scheme and experimental apparatus. For quantum nondemolition measurements, there is potentially some residual information in the postmeasurement state, while part of the information has been extracted and the rest is destroyed. Here, we propose a framework to characterize a quantum measurement by how much information it extracts and destroys, and how much information it leaves in the residual postmeasurement state. The concept is illustrated for several receivers discriminating coherent states.

  16. Residual dust charges in discharge afterglow

    International Nuclear Information System (INIS)

    Coueedel, L.; Mikikian, M.; Boufendi, L.; Samarian, A. A.

    2006-01-01

    An on-ground measurement of dust-particle residual charges in the afterglow of a dusty plasma was performed in a rf discharge. An upward thermophoretic force was used to balance the gravitational force. It was found that positively charged, negatively charged, and neutral dust particles coexisted for more than 1 min after the discharge was switched off. The mean residual charge for 200-nm-radius particles was measured. The dust particle mean charge is about -5e at a pressure of 1.2 mbar and about -3e at a pressure of 0.4 mbar

  17. Rigid Residue Scan Simulations Systematically Reveal Residue Entropic Roles in Protein Allostery.

    Directory of Open Access Journals (Sweden)

    Robert Kalescky

    2016-04-01

    Full Text Available Intra-protein information is transmitted over distances via allosteric processes. This ubiquitous protein process allows for protein function changes due to ligand binding events. Understanding protein allostery is essential to understanding protein functions. In this study, allostery in the second PDZ domain (PDZ2 in the human PTP1E protein is examined as model system to advance a recently developed rigid residue scan method combining with configurational entropy calculation and principal component analysis. The contributions from individual residues to whole-protein dynamics and allostery were systematically assessed via rigid body simulations of both unbound and ligand-bound states of the protein. The entropic contributions of individual residues to whole-protein dynamics were evaluated based on covariance-based correlation analysis of all simulations. The changes of overall protein entropy when individual residues being held rigid support that the rigidity/flexibility equilibrium in protein structure is governed by the La Châtelier's principle of chemical equilibrium. Key residues of PDZ2 allostery were identified with good agreement with NMR studies of the same protein bound to the same peptide. On the other hand, the change of entropic contribution from each residue upon perturbation revealed intrinsic differences among all the residues. The quasi-harmonic and principal component analyses of simulations without rigid residue perturbation showed a coherent allosteric mode from unbound and bound states, respectively. The projection of simulations with rigid residue perturbation onto coherent allosteric modes demonstrated the intrinsic shifting of ensemble distributions supporting the population-shift theory of protein allostery. Overall, the study presented here provides a robust and systematic approach to estimate the contribution of individual residue internal motion to overall protein dynamics and allostery.

  18. 40 CFR 180.564 - Indoxacarb; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Indoxacarb; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.564 Indoxacarb; tolerances for residues. (a) General. Tolerances are established for residues of...

  19. Management of industrial solid residues; Gerenciamento de residuos solidos industriais

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This chapter gives an overview on the management of industrial solid wastes, approaching the following subjects: classification of industrial solid residues; directives and methodologies for the management of industrial solid residues; instruments for the management of industrial solid residues; handling, packing, storage and transportation; treatment of industrial solid residues; final disposal - landfill for industrial residues; the problem of treatment and final disposer of domestic garbage in Brazil; recycling of the lubricant oils used in brazil; legislation.

  20. Corn residue removal and CO2 emissions

    Science.gov (United States)

    Carbon dioxide (CO2), nitrous oxide (N2O), and methane (CH4) are the primary greenhouse gases (GHG) emitted from the soil due to agricultural activities. In the short-term, increases in CO2 emissions indicate increased soil microbial activity. Soil micro-organisms decompose crop residues and release...

  1. Preliminary characterization of residual biomass from Hibiscus ...

    African Journals Online (AJOL)

    Hibiscus sabdariffa calyces are mainly used for different agro-food and beverages applications. The residual biomass generated contains various useful substances that were extracted and characterized. It contained 23% (w/w) soluble pectic material, a food additive, extracted with hot acidified water (80°C, pH = 1.5) and ...

  2. Residual strength evaluation of concrete structural components ...

    Indian Academy of Sciences (India)

    This paper presents methodologies for residual strength evaluation of concrete structural components using linear elastic and nonlinear fracture mechanics principles. The effect of cohesive forces due to aggregate bridging has been represented mathematically by employing tension softening models. Various tension ...

  3. Residual stresses in plastic random systems

    NARCIS (Netherlands)

    Alava, M.J.; Karttunen, M.E.J.; Niskanen, K.J.

    1995-01-01

    We show that yielding in elastic plastic materials creates residual stresses when local disorder is present. The intensity of these stresses grows with the external stress and degree of initial disorder. The one-dimensional model we employ also yields a discontinuous transition to perfect plasticity

  4. Recent advances in residual stress measurement

    International Nuclear Information System (INIS)

    Withers, P.J.; Turski, M.; Edwards, L.; Bouchard, P.J.; Buttle, D.J.

    2008-01-01

    Until recently residual stresses have been included in structural integrity assessments of nuclear pressure vessels and piping in a very primitive manner due to the lack of reliable residual stress measurement or prediction tools. This situation is changing the capabilities of newly emerging destructive (i.e. the contour method) and non-destructive (i.e. magnetic and high-energy synchrotron X-ray strain mapping) residual stress measurement techniques for evaluating ferritic and austenitic pressure vessel components are contrasted against more well-established methods. These new approaches offer the potential for obtaining area maps of residual stress or strain in welded plants, mock-up components or generic test-pieces. The mapped field may be used directly in structural integrity calculations, or indirectly to validate finite element process/structural models on which safety cases for pressurised nuclear systems are founded. These measurement methods are complementary in terms of application to actual plant, cost effectiveness and measurements in thick sections. In each case an exemplar case study is used to illustrate the method and to highlight its particular capabilities

  5. Geostatistical methods applied to field model residuals

    DEFF Research Database (Denmark)

    Maule, Fox; Mosegaard, K.; Olsen, Nils

    consists of measurement errors and unmodelled signal), and is typically assumed to be uncorrelated and Gaussian distributed. We have applied geostatistical methods to analyse the residuals of the Oersted(09d/04) field model [http://www.dsri.dk/Oersted/Field_models/IGRF_2005_candidates/], which is based...

  6. Vitrification for stability of scrap and residue

    Energy Technology Data Exchange (ETDEWEB)

    Forsberg, C.W. [Oak Ridge National Lab., TN (United States)

    1996-05-01

    A conference breakout discussion was held on the subject of vitrification for stabilization of plutonium scrap and residue. This was one of four such sessions held within the vitrification workshop for participants to discuss specific subjects in further detail. The questions and issues were defined by the participants.

  7. Thermal Adsorption Processing Of Hydrocarbon Residues

    Directory of Open Access Journals (Sweden)

    Sudad H. Al.

    2017-04-01

    Full Text Available The raw materials of secondary catalytic processes must be pre-refined. Among these refining processes are the deasphalting and demetallization including their thermo adsorption or thermo-contact adsorption variety. In oil processing four main processes of thermo-adsorption refining of hydrocarbon residues are used ART Asphalt Residual Treating - residues deasphaltizing 3D Discriminatory Destructive Distillation developed in the US ACT Adsorption-Contact Treatment and ETCC Express Thermo-Contact Cracking developed in Russia. ART and ACT are processes with absorbers of lift type reactor while 3D and ETCC processes are with an adsorbing reactor having ultra-short contact time of the raw material with the adsorbent. In all these processes refining of hydrocarbon residues is achieved by partial Thermo-destructive transformations of hydrocarbons and hetero-atomic compounds with simultaneous adsorption of the formed on the surface of the adsorbents resins asphaltene and carboids as well as metal- sulphur - and nitro-organic compounds. Demetallized and deasphalted light and heavy gas oils or their mixtures are a quality raw material for secondary deepening refining processes catalytic and hydrogenation cracking etc. since they are characterized by low coking ability and low content of organometallic compounds that lead to irreversible deactivation of the catalysts of these deepening processes.

  8. EFFECTS OF MUCUNA ( MUCUNA UTILIS L.) RESIDUE ...

    African Journals Online (AJOL)

    The field experiment was conducted at two locations: University of Agriculture, Abeokuta (UNAAB) and Olowo-Papa (OP) in Ogun state both in Forest-savannah transition zone of Nigeria to investigate the response of three upland rice cultivars (O.sativa) to mucuna residue incorporation and Nitrogen (N) fertilizer and the ...

  9. The measurement of residual stresses in claddings

    International Nuclear Information System (INIS)

    Hofer, G.; Bender, N.

    1978-01-01

    The ring core method, a variation of the hole drilling method for the measurement of biaxial residual stresses, has been extended to measure stresses from depths of about 5 to 25mm. It is now possible to measure the stress profiles of clad material. Examples of measured stress profiles are shown and compared with those obtained with a sectioning technique. (author)

  10. Characterization of residual oils for biodiesel production

    Directory of Open Access Journals (Sweden)

    Edmilson Antonio Canesin

    2014-01-01

    Conclusions: The obtained results suggesting that it is possible to take advantage of these residues for biodiesel production as the obtained products were approved according to the rules established by the National Association of Petroleum (ANP; the bovine samples were the exception regarding moisture and acidity.

  11. Contaminant transport at a waste residue deposit

    DEFF Research Database (Denmark)

    Engesgaard, Peter Knudegaard; Traberg, Rikke

    1996-01-01

    Contaminant transport in an aquifer at an incinerator waste residue deposit in Denmark is simulated. A two-dimensional, geochemical transport code is developed for this purpose and tested by comparison to results from another code, The code is applied to a column experiment and to the field site...

  12. Pemanfaatan Residu Pembakaran Sampah Organik Rumah Tangga

    Directory of Open Access Journals (Sweden)

    Eko Naryono

    2013-09-01

    Full Text Available Pembakaran sampah organik rumah tangga menghasilkan residu padat 25-30% yang terdiri dari abu bawah (BA, abu atas (FA dan kondensat air yang mengandung tar. Abu bawah sebagian besar terdiri dari bahan anorganik seperti Si, Al, Fe, Ca, Mg, K, Na, Cl dan logam berat antara lain Cd, Cr, Cu, Hg, Ni, Pb dan Zn, sedangkan abu atas tersusun dari bahan organik dan anorganik. Bahan organik yang terdapat dalam residu antara lain polycyclic aromatic hydrocarbon (PAH, chloro benzene (CB, polychlorinated biphenyl (PCB, polychlorinated dibenzo-p-dioksin (PCDD dan furan (PCDF. Residu pembakaran biomass perlu diolah atau dimanfaatkan agar tidak mengganggu lingkungan. Salah satu metode pengolahan yang mudah diterapkan dan aman terhadap lingkungan adalah pemadatan dan stabilisasi menggunakan semen atau lempung sebagai binder. Pemanfaatan produk ini dapat digunakan untuk batako atau batu bata. Berdasarkan prediksi, pembakaran sampah kota Malang sebesar 400 ton/hari menghasilkan abu 72 ton/hari. Pemakaian abu sebesar 25% pada pembuatan batako dengan perbandingan semen : pasir : abu sebesar 3,75 : 30 : 1,25 dapat menghasilkan batako setiap hari 366545 buah. Kata kunci : Abu, Batako, Residu, Pemadatan, Sampah organik rumah tangga

  13. Formulation of morning product using food residues

    Directory of Open Access Journals (Sweden)

    Maria do Rosário de Fátima Padilha

    2017-09-01

    Full Text Available In Brazil, there is resistance of the population to the use of stalks, leaves, peels and seeds of vegetables and fruits, leading to trash important parts of the food in good physiological conditions and with the presence of potential nutrients. In this research, a morning product was elaborated using green and dry coconut residue, jerimum and melon seed, crystallized sicilian lemon peel, cashew nut, common rapadura sweet and ginger. The bacteriological tests proved the hygienic-sanitary quality of the product, therefore suitable for consumption, that is, according to RDC 12/2001. It was also observed that the dehydration of all the residues reached the legal levels and accepted by ANVISA that limits in 25% the water content in the dehydrated foods. As for the centesimal composition, it was observed that the elaborated product with residues and other ingredients had a good content of macro nutrients. A use of the type of waste as a new food proposal constitutes an alternative to avoid and reduce: the serious environmental problem caused by the large residual volume generated, and the inadequate places in which they are stored or deposited, aggravating the scenario of food-borne pollutants.

  14. Valorization of Furfural Residue by Hydrothermal Carbonization

    DEFF Research Database (Denmark)

    Yue, Fen; Zhang, Jia; Pedersen, Christian Marcus

    2017-01-01

    Furfural residue (FR) is a low-cost by-product generated in the furfural production from corncobs, which is mainly composed of cellulose and lignin. In this report, hydrothermal carbonization (HTC) of deashed FR was conducted at various reaction temperatures (200, 220 and 240 °C) and reaction times...

  15. Chlorinated pesticide residues in marine sediments

    Digital Repository Service at National Institute of Oceanography (India)

    Sarkar, A.; SenGupta, R.

    of pesticide in contaminated river water into the Bay of Bengal. Con centration ranges of all these pesticide residues detected were, aldrine: 0.02-0.53, gamma BHC: 0.01-0.21, dieldrine: 0.05-0.51, and total DDT: 0.02-0.78, all in mu g g sup(-1) (wet wt)....

  16. Satellite Magnetic Residuals Investigated With Geostatistical Methods

    DEFF Research Database (Denmark)

    Fox Maule, Chaterine; Mosegaard, Klaus; Olsen, Nils

    2005-01-01

    (which consists of measurement errors and unmodeled signal), and is typically assumed to be uncorrelated and Gaussian distributed. We have applied geostatistical methods to analyze the residuals of the Oersted (09d/04) field model (www.dsri.dk/Oersted/Field models/IGRF 2005 candidates/), which is based...

  17. Agrochemicals and Residues Newsletter. No. 6

    International Nuclear Information System (INIS)

    1991-09-01

    This newsletter provides very brief summaries of the current coordinated research programs and of the completed coordinated research program on the study of the biological activity and bioavailability of bound pesticide residues using nuclear techniques (a more complete report will be published in the IAEA Panel Proceedings series). Research in progress at the Agrochemicals Unit of the IAEA Laboratory in Seibersdorf is also described

  18. QA/QC in pesticide residue analysis

    Energy Technology Data Exchange (ETDEWEB)

    Ambrus, A [Agrochemicals Unit, Agency' s Laboratories, Seibersdorf (Austria)

    2002-07-01

    This paper outlines problems related to pesticide residue analysis in a regulatory laboratory that are related to: availability of reference materials, as over 1000 pesticide active ingredients are currently in use and over 400 crops represent a large part of a healthy diet; analysis time; availability of samples in sufficient numbers; uncertainties of the procedures.

  19. QA/QC in pesticide residue analysis

    International Nuclear Information System (INIS)

    Ambrus, A.

    2002-01-01

    This paper outlines problems related to pesticide residue analysis in a regulatory laboratory that are related to: availability of reference materials, as over 1000 pesticide active ingredients are currently in use and over 400 crops represent a large part of a healthy diet; analysis time; availability of samples in sufficient numbers; uncertainties of the procedures

  20. Residual Stress Testing of Outer 3013 Containers

    International Nuclear Information System (INIS)

    Dunn, K.

    2004-01-01

    A Gas Tungsten Arc Welded (GTAW) outer 3013 container and a laser welded outer 3013 container have been tested for residual stresses according to the American Society for Testing Materials (ASTM) Standard G-36-94 [1]. This ASTM standard describes a procedure for conducting stress-corrosion cracking tests in boiling magnesium chloride (MgCl2) solution. Container sections in both the as-fabricated condition as well as the closure welded condition were evaluated. Significantly large residual stresses were observed in the bottom half of the as-fabricated container, a result of the base to can fabrication weld because through wall cracks were observed perpendicular to the weld. This observation indicates that regardless of the closure weld technique, sufficient residual stresses exist in the as-fabricated container to provide the stress necessary for stress corrosion cracking of the container, at the base fabrication weld. Additionally, sufficiently high residual stresses were observed in both the lid and the body of the GTAW as well as the laser closure welded containers. The stresses are oriented perpendicular to the closure weld in both the container lid and the container body. Although the boiling MgCl2 test is not a quantitative test, a comparison of the test results from the closure welds shows that there are noticeably more through wall cracks in the laser closure welded container than in the GTAW closure welded container

  1. Bioaccumulation and distribution of organochlorine residues across ...

    African Journals Online (AJOL)

    Eighteen organochlorine pesticide (OCP) residues were measured in the water, sediment, plankton, benthic invertebrates and fish in various sections of the Lagos Lagoon in 2014 to investigate their bioaccumulation and distribution in the food web. The analysis was done using gas chromatography with an electron capture ...

  2. Proceedings of the 7. biennial residue-to-revenue residual wood conference 2007

    International Nuclear Information System (INIS)

    Raulin, J.

    2007-01-01

    This conference provided information on the highest and best use of residual wood, which is quickly becoming a valuable commodity. Issues concerning forest residues, sawmill wastes, agricultural residues and urban organic materials were discussed along with trends in Canadian surplus mill waste production. The evolving nature and technologies of the biomass business were highlighted with particular focus on how to generate energy and save money through the use of residual wood. Residual wood energy projects and developments in Canada, North America and Europe were outlined along with biomass development in relation to forest fires and insect disturbances. Cogeneration technologies using wood wastes for thermal heat, steam and electricity were also presented, along with transportation fuel technologies for the production of ethanol. It was noted that with the rising cost of energy, the forest industry is seeking energy solutions based on the use of residual wood. The range of economically practical residual wood solutions continues to grow as energy prices increase. The conference was attended by more than 200 delegates from the forest industry, suppliers and government representatives, to discuss policies and procedures currently in place. Industry investment is being stimulated by the potential for biofuels and biochemicals, as well as the co-operation between the forest and energy sectors. The conference featured 23 presentations, of which 12 have been catalogued separately for inclusion in this database. refs., tabs., figs

  3. Antibiotic Residues - A Global Health Hazard

    Directory of Open Access Journals (Sweden)

    Nisha A.R.

    Full Text Available Use of Antibiotic that might result in deposition of residues in meat, milk and eggs must not be permitted in food intended for human consumption. If use of antibiotics is necessary as in prevention and treatment of animal diseases, a withholding period must be observed until the residues are negligible or no longer detected. The use of antibiotics to bring about improved performance in growth and feed efficiency, to synchronize or control of reproductive cycle and breeding performance also often lead to harmful residual effects. Concern over antibiotic residues in food of animal origin occurs in two times; one which produces potential threat to direct toxicity in human, second is whether the low levels of antibiotic exposure would result in alteration of microflora, cause disease and the possible development of resistant strains which cause failure of antibiotic therapy in clinical situations. A withdrawal period is established to safeguard human from exposure of antibiotic added food. The withdrawal time is the time required for the residue of toxicological concern to reach safe concentration as defined by tolerance. It is the interval from the time an animal is removed from medication until permitted time of slaughter. Heavy responsibility is placed on the veterinarian and livestock producer to observe the period for a withdrawal of a drug prior to slaughter to assure that illegal concentration of drug residue in meat, milk and egg do not occur. Use of food additives may improve feed efficiency 17% in beef cattle, 10% in lambs, 15% in poultry and 15% in swine. But their indiscriminate use will produce toxicity in consumers. WHO and FAO establish tolerances for a drug, pesticide or other chemical in the relevant tissues of food producing animals. The tolerance is the tissue concentration below, which a marker residue for the drug or chemical must fall in the target tissue before that animal edible tissues are considered safe for human

  4. Experimentelle Untersuchungen zur sonographischen Frakturdiagnostik im Kinderalter

    OpenAIRE

    Meuser, Stefan Heinrich Peter

    2010-01-01

    Falsch diagnostiziert und nicht korrekt therapiert können Frakturen im Kindesalter zu Wachstumsstörungen und damit verbundenen lebenslangen Problemen führen. Nach einem Trauma ist die klinische Untersuchung und Bestimmung des Schmerzmaximums gerade bei Kindern oft sehr schwierig. So müssen häufig mehrere Röntgenaufnahmen getätigt werden, ehe eine Fraktur sicher diagnostiziert oder ausgeschlossen werden kann. Die hierbei auftretende ionisierende Strahlung geht jedoch besonder...

  5. Untersuchungen zum Potential eines Verbrennungsmotors mit Druckwellenlader

    OpenAIRE

    Binder, Emanuel

    2015-01-01

    Mithilfe der Abgasturboaufladung lässt sich der Kraftstoffverbrauch im Fahrzeugbetrieb durch das Anheben der spezifischen Motorleistung senken. Im Gegensatz zur mechanischen Aufladung verschlechtert sich jedoch mit der Abgasturbolaufladung das Ansprechverhalten. Eine Möglichkeit den Zielkonflikt von Kraftstoffverbrauch und Ansprechverhalten zu lösen ist es, den Abgasturbolader durch einen Druckwellenladers zu ersetzen. Dieser überträgt die Abgasenergie direkt auf die Frischluft in Form von Dr...

  6. Untersuchungen zur Genauigkeit digitaler intraoraler Scans

    OpenAIRE

    Benedickt, Christopher Roland

    2017-01-01

    Ziel der hier vorliegenden In-vitro-Studie war es, zu untersuchen, ob es bei digitalen int-raoralen Scans zu Verzerrungen, Streckungen, Stauchungen, Verdrillungen oder Biegun-gen, kommt. Als Prüfmodell diente ein vollbezahntes Oberkiefermodell aus einer Chrom-Kobalt-Molybdän-Legierung. Auf diesem waren die Zähne 11, 15, 24 und 26 zur Auf-nahme eines Veneers, einer Vollkrone, eines Inlays präpariert, und auf inzisalen bezie-hungsweise okklusalen Mulden der Zähne 13, 23, 17 und 27 waren Metallk...

  7. Elektrophysiologische Untersuchungen an einzelligen marinen Riesenalgen

    OpenAIRE

    Ryser, Christoph

    2002-01-01

    Die kombinierte Mikroperfusions-/Ladungspulstechnik an einzelligen marinen Riesenalgen ermöglicht die getrennte Darstellung der elektrischen Eigenschaften von Plasmalemma und Tonoplast durch gezielte Manipulation des vakuolären und externen Mediums. Dabei kann der für die Physiologie der Zellen wichtige hydrostatische Innendruck (Turgor) ständig kontrolliert werden. Die Applikation eines Ladungspulses resultierte bei Valonia utricularis und Ventricaria ventricosa in einer biphasischen Relaxat...

  8. Residual stresses in microwave sintered Ni/8Y-ZrO{sub 2} and NiCr8020/8Y-ZrO{sub 2} gradient materials; Eigenspannungen in mikrowellengesinterten Ni/8Y-ZrO{sub 2} und NiCr8020/8Y-ZrO{sub 2} Gradientenwerkstoffen

    Energy Technology Data Exchange (ETDEWEB)

    Dantz, D.

    2000-07-01

    The connection between the residual macro- and microstresses and the macro- and micromechanical properties of pressureless microwave-sintered NiCr8020/8Y-ZrO{sub 2}, or Ni/8Y-ZrO{sub 2}, respectively, layered composites with gradient intermediate layers will be analysed by way of experimental methods. Non-destructive residual stress analyses will be done using various diffraction methods. Apart from conventional methods such as the sin{sup 2}{psi} method, or neutron scattering, specific analytical methods will be applied for examining the gradient sintered composites. The residual stress gradients found in the surface regions of specimens will be analysed with the scattering vector method. For examination of residual stress distributions in the core layers of the sintered specimens, an energy-dispersive technique with very high local resolution will be used, applying high-energy synchrotron radiation. The technique permits an analysis of residual stress distributions even in a homogeneous single layer of a gradient composite. In addition, line profile analyses will be made, and optical and electron-microscopical methods will be used for microstructure analyses. (orig./CB) [German] Im Rahmen dieser Arbeit wurde der Zusammenhang zwischen den Makro- und Mikroeigenspannungen und den makro- und mikromechanischen Eigenschaften an drucklos mikrowellengesinterten NiCr8020/8Y-ZrO{sub 2}- bzw. Ni/8Y-ZrO{sub 2}-Schichtverbundsystemen mit gradierter Zwischenschicht mit Hilfe experimenteller Methoden systematisch untersucht. Die Eigenspannungsanalysen erfolgten zerstoerungsfrei mit Hilfe unterschiedlicher Beugungsmethoden. Neben den konventionellen Methoden, wie dem sin{sup 2}{psi}-Verfahren oder auch der Neutronenbeugung, wurden zur Untersuchung der gradiert zusammengesetzten Sinterkoerper spezielle Analyseverfahren eingesetzt. Die im probenoberflaechennahen Bereich vorliegenden Eigenspannungsgradienten wurden mit Hilfe des Streuvektorverfahrens analysiert. Fuer die

  9. Transformation behaviour and residual stresses in welding of new LTT filler materials; Umwandlungsverhalten und Eigenspannungen beim Schweissen neuartiger LTT-Zusatzwerkstoffe

    Energy Technology Data Exchange (ETDEWEB)

    Kromm, Arne

    2011-07-06

    is seen to occur. This is observed for the considered alloys to be particularly pronounced in transverse direction of the weld. By contrast, the residual stress level in longitudinal weld direction is nearly independent of the shrinkage conditions. With the help of residual stress depth gradients it could be established that the additional shrinkage restraint manifests itself in a parallel shift of the residual stress level in the weld metal. Application of energy-dispersive diffraction methods additionally allowed it for the first time to determine residual stresses in the austenitic phase of the LTT alloy which is present parallel to martensite. Results gained under laboratory conditions mostly need to be verified under real fabrication conditions. For this purpose, a component weld test was performed in a special large-scale testing facility. Under structural shrinkage restraint, the load relieving effect of a specific LTT welding filler material could be proven by means of a pronounced stress reduction duringwelding. Overall, evidence was furnished that the concept of Low Transformation Temperature (LTT)alloys is successful and that the proven austenite-martensite transformation exerts a significanteffect on the residual stress level. [German] Die Erkenntnis, dass die Phasenumwandlung bei der Schweisseigenspannungsentstehung hochfester Staehle eine bedeutende Rolle spielt, gibt es bereits seit langer Zeit. Bisher existierten jedoch keine Ansaetze, diesen Effekt praktisch zur Schweisseigenspannungskontrolle zu nutzen. Neuartige Low Transformation Temperature (LTT) Legierungen bieten aufgrund ihrer charakteristischen chemischen Zusammensetzung die Moeglichkeit, hochfeste Staehle auf deren Festigkeitsniveau zu fuegen. Die martensitische Phasenumwandlung soll zudem eine gezielte Einstellung der Schweisseigenspannungen erlauben. Die im Schrifttum vorliegenden Untersuchungen zu diesem Thema sind zwar zahlreich, bieten jedoch nur wenige Erkenntnisse zur Wechselwirkung

  10. Investigations into the formal pathogenesis of quartz-dust-induced tumours of the lungs in rats. Pt. 1. Pneumocyte proliferation and changes in the lung tissue; Untersuchungen zur formalen Pathogenese quarzstaubinduzierter Lungen-Tumoren bei der Ratte. T. 1. Pneumozytenproliferation und Lungenumbau

    Energy Technology Data Exchange (ETDEWEB)

    Friemann, J. [Medizinisches Inst. fuer Umwelthygiene, Univ. Duesseldorf (Germany); Kubitza, R. [Medizinisches Inst. fuer Umwelthygiene, Univ. Duesseldorf (Germany); Weishaupt, C. [Medizinisches Inst. fuer Umwelthygiene, Univ. Duesseldorf (Germany); Varnai, M. [Medizinisches Inst. fuer Umwelthygiene, Univ. Duesseldorf (Germany); Pott, F. [Medizinisches Inst. fuer Umwelthygiene, Univ. Duesseldorf (Germany); Musinski, G. [Medizinisches Inst. fuer Umwelthygiene, Univ. Duesseldorf (Germany)

    1995-12-31

    organisierender Regionen (NOR) durchgefuehrt. Ergaenzend wurden morphometrische Untersuchungen zur Bestimmung des Silikosegrades und zur Quantifizierung der Ausdehnung der Quarzstaub-induzierten bronchioloalveolaeren Hyperplasie durchgefuehrt. Die Untersuchungen fuehrten zusammenfassend zu dem Ergebnis, dass die inhalative und intratracheale Quarzstaubapplikation bei Ratten regelmaessig eine Alveolarproteinose in Kombination mit einer Dosis- und zeitabhaengigen Zunahme der Pneumozytenproliferationsrate induziert. Ferner kommt es regelmaessig zur Ausbildung einer multifokalen adenomatoesen Hyperplasie (bronchiolo-alveolaeren Hyperplasie) des Lungenparenchyms. Die moegliche Bedeutung beider Laesionen fuer die Entstehung experimenteller Quarzstaub-induzierter Lungentumoren wird diskutiert. (orig.)

  11. Stabilization of plutonium bearing residues at Lawrence Livermore National Laboratory

    International Nuclear Information System (INIS)

    Bronson, M.C.; Van Konynenburg, R.A.; Ebbinghaus, B.B.

    1995-01-01

    The US Department of Energy's (US DOE) Lawrence Livermore National Laboratory (LLNL) has plutonium holdings including metal, oxide and residue materials, all of which need stabilization of some type. Residue materials include calcined ash, calcined precipitates, pyrochemical salts, glove box sweepings, metallurgical samples, graphite, and pyrochemical ceramic crucibles. These residues are typical of residues stored throughout the US DOE plutonium sites. The stabilization process selected for each of these residues requires data on chemical impurities, physical attributes, and chemical forms of the plutonium. This paper outlines the characterization and stabilization of LLNL ash residues, pyrochemical salts, and graphite

  12. Isotopic tracer aided studies of fenvalerate residues in stored rice

    International Nuclear Information System (INIS)

    Varca, L.M.; Sanchez, T.E.; Magallona, E.D.

    1990-01-01

    Following application of 14 C-fenvalerate to milled rice and paddy rice at a concentration of 0.33 mg/kg, only insignificant losses were measured after 9 months. Distribution patterns in surface, methanol extractable and bound residues were studied. Paddy rice contained less extractable residues than milled rice, with the major part being found in the husk. Bound residues in both milled and paddy rice decreased also with length of storage; as much as 30% was found as bound residues after nine months. Cooking reduced the insecticide residues in milled rice by 33-40% and residues in paddy rice by 58%. (author). 8 refs, 1 fig., 4 tabs

  13. Electroremediation of air pollution control residues in a continuous reactor

    DEFF Research Database (Denmark)

    Jensen, Pernille Erland; Ferreira, Célia M. D.; Hansen, Henrik K.

    2010-01-01

    Air pollution control (APC) residue from municipal solid waste incineration is considered hazardous waste due to its alkalinity and high content of salts and mobile heavy metals. Various solutions for the handling of APC-residue exist, however most commercial solutions involve landfilling. A demand...... were made with raw residue, water-washed residue, acid washed residue and acid-treated residue with emphasis on reduction of heavy metal mobility. Main results indicate that the reactor successfully removes toxic elements lead, copper, cadmium and zinc from the feed stream, suggesting...

  14. An application of residual current protective device at electrical installation

    International Nuclear Information System (INIS)

    Firman Silitonga

    2008-01-01

    In an electrical installation, a protection for overload and short circuit are always to be installed. In addition to the installation, it is necessary to be installed a protection device for residual current because both the short circuit and the overload device protection will not work for the residual current. The quantity of the residual current must be defined first at any electrical installation to define an appropriate residual current protection so that not every residual current will break the circuit down. This paper will explain a method how to install a residual protection device for 3500 VA or more at TN and TT of earthing system. (author)

  15. On the parametrization of the Δ residue function

    International Nuclear Information System (INIS)

    Vasan, S.S.

    1976-01-01

    The complex residues at the Δ(1236) and Δ(1950) poles in the relevant partial-wave amplitudes provide information on the behaviour of the Δ Regge residue function in the resonance region u>0. Attempts to incorporate this information in parametrizations of the residue by functions that are real on the real u-axis result in residues which have unsatisfactory behaviour in the region u 2 . The choice of complex functions for the trajectory and residue removes this undesirable feature and provides a better representation of the residue in the resonance region, suggesting that complex parametrizations would be better suited to Regge analyses of near-backward scattering. (Auth.)

  16. Sun drying of residual annatto seed powder

    Directory of Open Access Journals (Sweden)

    Dyego da Costa Santos

    2015-01-01

    Full Text Available Residual annatto seeds are waste from bixin extraction in the food, pharmaceutical and cosmetic industries. Most of this by-product is currently discarded; however, the use of these seeds in human foods through the elaboration of powder added to other commercial powders is seen as a viable option. This study aimed at drying of residual annatto powder, with and without the oil layer derived from the industrial extraction of bixin, fitting different mathematical models to experimental data and calculating the effective moisture diffusivity of the samples. Powder containing oil exhibited the shortest drying time, highest drying rate (≈ 5.0 kg kg-1 min-1 and highest effective diffusivity (6.49 × 10-12 m2 s-1. All mathematical models assessed were a suitable representation of the drying kinetics of powders with and without oil, with R2 above 0.99 and root mean square error values lower than 1.0.

  17. Residual effects of hypnotics: an update.

    Science.gov (United States)

    Hindmarch, I

    1991-07-01

    The sedative/hypnotic benzodiazepines introduced worldwide in the early 1960s were acclaimed for their low chemical toxicity and safety in clinical use. A decade later, some researchers and clinicians found that while all the drugs had undoubted potency and efficacy as sleep inducers and maintainers, the trade-off in residual effects (e.g., excessive daytime tiredness, poor concentration, impaired psychomotor performance, lowered mental abilities) was cause for concern. These sequelae not only affected patients' safety and ability to perform daytime tasks, but were also counter-therapeutic; the daytime sleep that was produced interfered with the natural nocturnal sleep. In a recent study, the degree to which patient abilities were impaired was measured by a number of psychomotor tests. Benzodiazepines with a duration of clinical effect of less than 8 to 10 hours produced fewer, less frequent residual effects than those with a measurable activity in excess of the normal nocturnal sleep period.

  18. [Waste over history: perceptions about residues].

    Science.gov (United States)

    Velloso, Marta Pimenta

    2008-01-01

    This article describes how Man, over history, felt about the residues produced by human activity. The text is divided into three parts: In the first part it tells the story of the black plague pandemic during the XIV century, showing how this disease was associated with the residues produced by the human body. In the second part it explains how the first notions of waste were, and still are, related to dirt, disease and death. Finally, in the third part, it describes the first measures of hygiene in the Renaissance and refers to the first public health actions at the beginning of the XX century, starting to combat the agents of infectious diseases and their vectors.

  19. On quadratic residue codes and hyperelliptic curves

    Directory of Open Access Journals (Sweden)

    David Joyner

    2008-01-01

    Full Text Available For an odd prime p and each non-empty subset S⊂GF(p, consider the hyperelliptic curve X S defined by y 2 =f S (x, where f S (x = ∏ a∈S (x-a. Using a connection between binary quadratic residue codes and hyperelliptic curves over GF(p, this paper investigates how coding theory bounds give rise to bounds such as the following example: for all sufficiently large primes p there exists a subset S⊂GF(p for which the bound |X S (GF(p| > 1.39p holds. We also use the quasi-quadratic residue codes defined below to construct an example of a formally self-dual optimal code whose zeta function does not satisfy the ``Riemann hypothesis.''

  20. On locating steganographic payload using residuals

    Science.gov (United States)

    Quach, Tu-Thach

    2011-02-01

    Locating steganographic payload usingWeighted Stego-image (WS) residuals has been proven successful provided a large number of stego images are available. In this paper, we revisit this topic with two goals. First, we argue that it is a promising approach to locate payload by showing that in the ideal scenario where the cover images are available, the expected number of stego images needed to perfectly locate all load-carrying pixels is the logarithm of the payload size. Second, we generalize cover estimation to a maximum likelihood decoding problem and demonstrate that a second-order statistical cover model can be used to compute residuals to locate payload embedded by both LSB replacement and LSB matching steganography.

  1. Persistence of malathion residues in stored wheat

    International Nuclear Information System (INIS)

    Farghaly, M.; Zayed, S.M.A.D.

    1990-01-01

    The persistence of succinate- 14 C-malathion in stored wheat was investigated under local conditions during a storage period of 32 weeks. The insecticide penetrated readily into the seed and up to 16% of the applied dose was found to be bound after 32 weeks in storage. Total terminal residues declined to 9.3 and 21.0 mg/kg from initially applied doses of 12.2 and 24.4 mg/kg respectively. A small percentage of malaoxon was detected only during the early weeks after treatment (3-5%). Malathion was the major constituent of the extractable residues. In addition, seven degradation products were detected and identified. (author). 6 refs, 2 figs, 2 tabs

  2. Alkali activation processes for incinerator residues management.

    Science.gov (United States)

    Lancellotti, Isabella; Ponzoni, Chiara; Barbieri, Luisa; Leonelli, Cristina

    2013-08-01

    Incinerator bottom ash (BA) is produced in large amount worldwide and in Italy, where 5.1 millionstons of municipal solid residues have been incinerated in 2010, corresponding to 1.2-1.5 millionstons of produced bottom ash. This residue has been used in the present study for producing dense geopolymers containing high percentage (50-70 wt%) of ash. The amount of potentially reactive aluminosilicate fraction in the ash has been determined by means of test in NaOH. The final properties of geopolymers prepared with or without taking into account this reactive fraction have been compared. The results showed that due to the presence of both amorphous and crystalline fractions with a different degree of reactivity, the incinerator BA geopolymers exhibit significant differences in terms of Si/Al ratio and microstructure when reactive fraction is considered. Copyright © 2013 Elsevier Ltd. All rights reserved.

  3. Recovering recyclable materials from shredder residue

    Science.gov (United States)

    Jody, Bassam J.; Daniels, Edward J.; Bonsignore, Patrick V.; Brockmeier, Norman F.

    1994-02-01

    Each year, about 11 million tons of metals are recovered in the United States from about 10 million discarded automobiles. The recovered metals account for about 75 percent of the total weight of the discarded vehicles. The balance of the material, known as shredder residue, amounts to about three million tons annually and is currently landfilled. The residue contains a diversity of potentially recyclable materials, including polyurethane foams, iron oxides, and certain thermoplastics. This article discusses a process under development at Argonne National Laboratory to separate and recover the recyclable materials from this waste stream. The process consists essentially of two stages. First, a physical separation is used to recover the foams and the metal oxides, followed by a chemical process to extract certain thermoplastics. The status of the technology and the process economics are reviewed here.

  4. Hydrogenation upgrading of heavy oil residues

    Energy Technology Data Exchange (ETDEWEB)

    Krichko, A.A.; Maloletnev, A.S.; Mazneva, O.A.; Galkina, N.I. [Fossil Fuel Inst., Moscow (Russian Federation). Hydrogenation and Gasification Dept.; Suvorov, U.P.; Khadjiev, S.N. [Inst. Oil and Chemical Synthesis, Moscow (Russian Federation). Hydrogenation of Heavy Residues Dept.

    1997-12-31

    At present time in the world there is no simple and effective technology at low pressure (<15-20 MPa) which could give the opportunity to use oil residues for distillate fractions production. In Russia a process for hydrogenation (up 6 MPa hydrogen pressure) of high boiling point (b.p. >520 C) oil products, including high S, V and Ni contents ones, into distillates, feedstock for catalytic cracking (b.p. 360-520 C) and metal concentrates. The main point of the new process is as follows: the water solution of catalytic additive, for which purpose water soluble metal salts of VI-VIII groups are used, is mixed with heavy oil residues, dispersed and then subjected to additional supercavitation in a special apparatus. (orig.)

  5. Developments in hydroconversion processes for residues

    Energy Technology Data Exchange (ETDEWEB)

    Douwes, C T [Shell Res. B.V.; Wijffels, J B; Van Klinken, J; Van Zijll Langhout, W C

    1979-01-01

    A review of recent developments in hydrotreating processes for demetallization, desulfurization, and conversion to distillate products of residues covers catalyst developments for suppression of coke formation, maximum metals tolerance, and conversion selectivity; the effects of hydrogen pressure and temperature on catalyst deactivation and conversion; basic operating characteristics of conventional fixed-bed trickle-flow reactors, and of onstream catalyst replacement reactors, including the expanded-bed and the moving-bed reactor; a comparison of catalyst bed activity level, dirt tolerance, reactor effectiveness, temperature control, and thermal stability of the expanded-bed and moving-bed reactors; residue upgrading in slurry-bed reactors of dispersed vanadium sulfide catalyst in the oil; design and control features for safety and reliability; and a cost comparison between the indirect hydrotreating route, in which the asphalt fraction is separated prior to hydrotreating, and the as yet incompletely developed direct route.

  6. HDHPLUS/SHP : heavy residue hydroconversion technology

    Energy Technology Data Exchange (ETDEWEB)

    Morel, F. [Axens, Rueil Malmaison (France)

    2009-07-01

    This presentation described an integrated refinery process that achieves nearly full conversion of heavy and refractory residues into ultra high quality and ultra low sulphur transportation fuels with a yield great than 100 volume per cent. The Axens, IFP and Intevep/PDVSA Alliance combined the HDHPLUS vacuum residue slurry technology with Sequential Hydro Processing (SHP) of primary hydrocracked products. Both technologies have undergone extensive testing at a refinery in Puerto La Cruz (RPLC), Venezuela to begin production of 50,000 BPSD in 2012. The demonstration unit at Intevep has been used to investigate production of effluent for the downstream SHP processing. This paper also reviewed the SHP bench unit operations at IFP's Lyon research center in France and disclosed the final product yields and qualities. The test results have shown the expected RPLC deep conversion commercial unit performances and fully secure its design basis. tabs., figs.

  7. Reduction of radiation exposure in PET examinations by data acquisition in the 3D mode; Reduktion der Strahlenexposition bei PET-Untersuchungen durch Datenakquisition im 3D-Modus

    Energy Technology Data Exchange (ETDEWEB)

    Brix, G. [Bundesamt fuer Strahlenschutz, Neuherberg (Germany). Inst. fuer Strahlenhygiene]|[Deutsches Krebsforschungszentrum (DKFZ), Heidelberg (Germany). Forschungsschwerpunkt Radiologische Diagnostik und Therapie; Adam, L.E. [Department of Radiology, Philadelphia, PA (United States). Div. of Nuclear Medicine; Zaers, J.; Trojan, H.; Doll, J. [Deutsches Krebsforschungszentrum (DKFZ), Heidelberg (Germany). Forschungsschwerpunkt Radiologische Diagnostik und Therapie; Bellemann, M.E. [Deutsches Krebsforschungszentrum (DKFZ), Heidelberg (Germany). Forschungsschwerpunkt Radiologische Diagnostik und Therapie]|[Fachhochschule Jena (Germany). Fachbereich Medizintechnik; Nosske, D. [Bundesamt fuer Strahlenschutz, Neuherberg (Germany). Inst. fuer Strahlenhygiene

    1999-04-01

    , auf die abschirmende Wirkung von Septen zwischen den einzelnen Detektorringen (2D-Modus) zu verzichten, so dass auch koinzidente Ereignisse zwischen Detektoren auf weiter entfernt liegenden Ringen erfasst werden koennen (3D-Modus). Ziel der vorliegenden Arbeit war es, das Zaehlratenverhalten eines PET-Scanners der neuesten Generation im 2D- und im 3D-Modus anhand von Phantommessungen zu untersuchen und die sich daraus ergebenden Konsequenzen fuer die Strahlenhygiene bei PET-Untersuchungen mit 2-[F-18]-Fluor-2-Desoxyglukose (F-18-FDG) zu diskutieren. Methoden: Alle Messungen wurden am Ganzkoerper-PET-System ECAT EXACT HR{sup +} durchgefuehrt. Fuer die 2D-Messungen wurde ein Kollimator aus duennen Wolframlamellen in das Gesichtsfeld eingebracht. Das Zaehlratenverhalten des Scanners wurde dem NEMA-Protokoll folgend ueber einen weiten Bereich von F-18-Aktivitaetskonzentrationen untersucht. Darueber hinaus wurden PET-Aufnahmen des EEC-Ganzkoerperphantoms mit verschiedenen Einsaetzen im 2D- und im 3D-Modus jeweils ueber 15 min akquiriert, wobei die F-18-Aktivitaetskonzentrationen bei der 3D-Messung halb so hoch waren wie bei der 2D-Messung. Ergebnisse: Fuer das zylinderfoermige NEMA-Phantom (Durchmesser=19,4 cm, Laenge=19,0 cm) ergab sich im 3D-Modus eine im Vergleich zur 2D-Akquisition etwa fuenffach hoehere Systemsensitivitaet (27,7 statt 5,7 cps/Bq/ml). Die Auswertung der rekonstruierten Aktivitaetsverteilungen des EEC-Phantoms ergab, dass die Qualitaet der aus dem 3D-Projektionsdatensatz berechneten PET-Aufnahmen besser war als die der korrespondierenden 2D-Aufnahmen, obwohl die Aktivitaetskonzentrationen nur halb so hoch waren. Schlussfolgerungen: Durch die Datenakquisition im 3D-Modus kann die zu applizierende Aktivitaetsmenge bei gleichzeitiger Verbesserung der Bildqualitaet erheblich reduziert werden. Fuer Patientenuntersuchungen mit F-18-FDG im Ganzkoerperbereich reicht es unserer Erfahrung nach aus, eine Aktivitaet zwischen 150 und 200 MBq zu applizieren. Dies

  8. Residues leaching from 'Factory of barren ores'

    International Nuclear Information System (INIS)

    Rakhmatov, N.; Khakimov, N.; Nazarov, Kh.M.; Barotov, A.M.

    2012-01-01

    The objective of the present work is safe management of residues from Factory of Barren Ores, their reprocessing, expenditures reduction for remediation of Istiklol city former uranium tailings. For this purpose, some experiences were adopted - Factory of Barren Ores tailing use for filling up the open pit where water with uranium content 3-5 mg/l is located. Factory of Barren Ores waste are passed through heap leaching and have some amount of uranium salts dissolved in water. Thus, we propose to dissolve uranium from Factory of Barren Ores wastes with uranium bearing water flowing out from gallery and filling up the open-pit by radioactive wastes. In so doing, uranium content flowing out from gallery will increase twice, and further, passing them through apricot's shell, as a sorbent, we will clean the water against radionuclides. Residue samples with uranium content 0,015% from Factory of Barren Ores and uranium bearing waters from gallery 1 with uranium content 0,0025 g/l were used for laboratory tests. After which, a slurry was prepared by means of residue mixing with water in ratio of solid and liquid phases (S:L) - 1:2 and 9,7 ml of sulfuric acid (Ρ=1,82) was added which corresponds consumption by H 2 SO 4 176,54 kg/t. For the first test, leaching was carried out during 4 hours at ph=1,6 at room temperature. For the second test, leaching was carried out at 60 d eg C a nd ph=1,6 during 4 hours. Slurry heating and mixing was carried out by means of magnetic mixer. The basic residue leaching indicators are provided in this article.

  9. Environmental assessment of incinerator residue utilisation

    OpenAIRE

    Toller, Susanna; Kärrman, Erik; Gustafsson, Jon Petter; Magnusson, Y.

    2009-01-01

    Incineration ashes may be treated either as a waste to be dumped in landfill, or as a resource that is suit able for re-use. In order to choose the best management scenario, knowledge is needed on the potential environmental impact that may be expected, including not only local, but also regional and global impact. In this study. A life cycle assessment (LCA) based approach Was Outlined for environmental assessment of incinerator residue utilisation, in which leaching of trace elements as wel...

  10. Sedentary behavior and residual-specific mortality

    OpenAIRE

    Paul D. Loprinzi; Meghan K. Edwards; Eveleen Sng; Ovuokerie Addoh

    2016-01-01

    Background: The purpose of this study was to examine the association of accelerometer-assessed sedentary behavior and residual-specific mortality. Methods: Data from the 2003-2006 National Health and Nutrition Examination Survey (NHANES) were used (N = 5536), with follow-up through 2011. Sedentary behavior was objectively measured over 7 days via accelerometry. Results: When expressing sedentary behavior as a 60 min/day increase, the hazard ratio across the models ranged from 1.07-1.40 (P < 0...

  11. Determination of Pesticide Residues in Cannabis Smoke

    OpenAIRE

    Nicholas Sullivan; Sytze Elzinga; Jeffrey C. Raber

    2013-01-01

    The present study was conducted in order to quantify to what extent cannabis consumers may be exposed to pesticide and other chemical residues through inhaled mainstream cannabis smoke. Three different smoking devices were evaluated in order to provide a generalized data set representative of pesticide exposures possible for medical cannabis users. Three different pesticides, bifenthrin, diazinon, and permethrin, along with the plant growth regulator paclobutrazol, which are readily available...

  12. Application of preservatives for residual fuels

    International Nuclear Information System (INIS)

    Gorozpe y Munoz, Tomas

    2000-01-01

    Due to the high costs of the combust oils (fuel oil 6) used in generators of vapor and in other treatments, makes important consider the use of preservatives that improve the operation of the units from the operative point of view and of environmental control. The author enumerates several of the problems of corrosion, of efficiency in the combustion and of thermal efficiency; in a same way it enumerates several useful preservatives, to be used in residual fuel

  13. Elemental quantification of large gunshot residues

    Energy Technology Data Exchange (ETDEWEB)

    Duarte, A. [Ion Implantation Laboratory, Institute of Physics, Federal University of Rio Grande do Sul, Av. Bento Gonçalves 9500, P.O. Box 15051, CEP 91501-970 Porto Alegre, RS (Brazil); Graduate Program on Materials Science, Federal University of Rio Grande do Sul, Av. Bento Gonçalves 9500, CEP 91540-000 Porto Alegre, RS (Brazil); Silva, L.M. [Ion Implantation Laboratory, Institute of Physics, Federal University of Rio Grande do Sul, Av. Bento Gonçalves 9500, P.O. Box 15051, CEP 91501-970 Porto Alegre, RS (Brazil); Graduate Program on Materials Science, Federal University of Rio Grande do Sul, Av. Bento Gonçalves 9500, CEP 91540-000 Porto Alegre, RS (Brazil); Forensic Institute of Porto Alegre, Av. Princesa Isabel 1056, CEP 90230-010 Porto Alegre, RS (Brazil); Souza, C.T. de; Stori, E.M. [Ion Implantation Laboratory, Institute of Physics, Federal University of Rio Grande do Sul, Av. Bento Gonçalves 9500, P.O. Box 15051, CEP 91501-970 Porto Alegre, RS (Brazil); Boufleur, L.A. [Ion Implantation Laboratory, Institute of Physics, Federal University of Rio Grande do Sul, Av. Bento Gonçalves 9500, P.O. Box 15051, CEP 91501-970 Porto Alegre, RS (Brazil); Graduate Program on Materials Science, Federal University of Rio Grande do Sul, Av. Bento Gonçalves 9500, CEP 91540-000 Porto Alegre, RS (Brazil); Amaral, L. [Ion Implantation Laboratory, Institute of Physics, Federal University of Rio Grande do Sul, Av. Bento Gonçalves 9500, P.O. Box 15051, CEP 91501-970 Porto Alegre, RS (Brazil); and others

    2015-04-01

    In the present work we embarked on the evaluation of the Sb/Pb, Ba/Pb and Sb/Ba elemental ratios found in relatively large particles (of the order of 50–150 μm across) ejected in the forward direction when a gun is fired. These particles are commonly referred to as gunshot residues (GSR). The aim of this work is to compare the elemental ratios of the GSR with those found in the primer of pristine cartridges in order to check for possible correlations. To that end, the elemental concentration of gunshot residues and the respective ammunition were investigated through PIXE (Particle-Induced X-ray Emission) and micro-PIXE techniques. The ammunition consisted of a .38 SPL caliber (ogival lead type) charged in a Taurus revolver. Pristine cartridges were taken apart for the PIXE measurements. The shooting sessions were carried out in a restricted area at the Forensic Institute at Porto Alegre. Residues ejected at forward directions were collected on a microporous tape. The PIXE experiments were carried out employing 2.0 MeV proton beams with a beam spot size of 1 mm{sup 2}. For the micro-PIXE experiments, the samples were irradiated with 2.2 MeV proton beams of 2 × 2 μm{sup 2}. The results found for the ratios of Sb/Pb, Ba/Pb and Sb/Ba do not correlate with those stemming from the analysis of the primer.

  14. Thermal inertializing of solid incinerator residues

    International Nuclear Information System (INIS)

    Proelss, J.

    2003-01-01

    Inertialization of residues is a key task of incinerators. Residues of conventional incineration processes may contain high levels of inorganic or organic pollutants and must be treated prior to recycling. the most effective process is thermal treatment above the melting point. This will destroy organic pollutants like dioxins/furans and pathogenic compounds, while the heavy metals will be partly volatilized. The glassy slag obtained as end product is low in heavy metals and more or less resistant to leaching. The The author describes a method for calculating activity coefficients of volatile components of diluted, liquid multicomponent systems. With these data, the data base for thermodynamic description of fluid mixtures was updated, and a set of characteristic data was established for describing transport in an inflatable module. Once the activity coefficients of interesting constituents of the slag are known along with the transport conditions in the volatilization process, it is possible to optimize the thermal treatment of critical ashes and dusts with a view to energy consumption and process control. In two different exemplary process concepts, the energy consumption for residue treatment is estimated. The processes proposed are compared with published process proposals, and their energy consumption is assessed in a comoparative study [de

  15. Residual Stresses and Other Properties of Teardrops

    Energy Technology Data Exchange (ETDEWEB)

    Stroud, Mary Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Veirs, Douglas Kirk [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Berg, John M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hill, Mary Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Rios, Daniel [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Duque, Juan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-07-26

    The Department of Energy’s 3013 Standard for packaging plutonium-bearing materials for storage up to fifty years specifies a minimum of two individually welded, nested containers herein referred to as the 3013 outer and the 3013 inner.1 Stress corrosion cracking (SCC) is a potential failure mechanism for 3013 inner containers.2,3 The bagless transfer container (BTC), a 3013 inner container used by Hanford and Savanna River Site (SRS) made from 304L stainless steel (SS), poses the greatest concern for SCC.4,5 The Surveillance and Monitoring Program (SMP) use stressed metal samples known as teardrops as screening tools in SCC studies to evaluate factors that could result in cracks in the 3013 containers.6,7 This report provides background information on the teardrops used in the Los Alamos National Laboratory (LANL) SMP studies including method of construction, composition and variability. In addition, the report discusses measurements of residual stresses in teardrops and compares the results with residual stresses in BTCs reported previously.4 Factors affecting residual stresses, including teardrop dimensions and surface finish, are also discussed.

  16. Advanced new technologies for residue upgrading

    International Nuclear Information System (INIS)

    Gillis, D.

    1997-01-01

    Viewgraphs summarizing UOP technologies for residue are provided. The upgrading technologies include: (1) Aquaconversion, (2) the Discriminatory Destructive Distillation process (3D), and (3) the RCD uniflex process. The Aquaconversion process is based on catalytic hydrovisbreaking. It makes use of a homogeneous (liquid phase) catalyst. The hydrogen is derived from water. The advantages of this process are improved residue stability and quality at higher conversion levels, high synthetic crude yields, low operational complexity, reduced transportation costs. The 3D process is a unique carbon rejection contaminant removal process which can process whole crudes through viscous residues. FCC type equipment is used. Performance characteristics and advantages of the process were highlighted. The RCD uniflex process makes use of proven fixed bed and ebullated bed technologies in a new process configuration in which the fixed bed system is located upstream of the ebullated bed system. In this process, the catalyst volume increases exponentially with increasing processing severity. Performance characteristics, design features, benefits and development progress to date are described. 1 tab., 21 figs

  17. Elemental quantification of large gunshot residues

    International Nuclear Information System (INIS)

    Duarte, A.; Silva, L.M.; Souza, C.T. de; Stori, E.M.; Boufleur, L.A.; Amaral, L.

    2015-01-01

    In the present work we embarked on the evaluation of the Sb/Pb, Ba/Pb and Sb/Ba elemental ratios found in relatively large particles (of the order of 50–150 μm across) ejected in the forward direction when a gun is fired. These particles are commonly referred to as gunshot residues (GSR). The aim of this work is to compare the elemental ratios of the GSR with those found in the primer of pristine cartridges in order to check for possible correlations. To that end, the elemental concentration of gunshot residues and the respective ammunition were investigated through PIXE (Particle-Induced X-ray Emission) and micro-PIXE techniques. The ammunition consisted of a .38 SPL caliber (ogival lead type) charged in a Taurus revolver. Pristine cartridges were taken apart for the PIXE measurements. The shooting sessions were carried out in a restricted area at the Forensic Institute at Porto Alegre. Residues ejected at forward directions were collected on a microporous tape. The PIXE experiments were carried out employing 2.0 MeV proton beams with a beam spot size of 1 mm 2 . For the micro-PIXE experiments, the samples were irradiated with 2.2 MeV proton beams of 2 × 2 μm 2 . The results found for the ratios of Sb/Pb, Ba/Pb and Sb/Ba do not correlate with those stemming from the analysis of the primer

  18. Residual extrapolation operators for efficient wavefield construction

    KAUST Repository

    Alkhalifah, Tariq Ali

    2013-02-27

    Solving the wave equation using finite-difference approximations allows for fast extrapolation of the wavefield for modelling, imaging and inversion in complex media. It, however, suffers from dispersion and stability-related limitations that might hamper its efficient or proper application to high frequencies. Spectral-based time extrapolation methods tend to mitigate these problems, but at an additional cost to the extrapolation. I investigate the prospective of using a residual formulation of the spectral approach, along with utilizing Shanks transform-based expansions, that adheres to the residual requirements, to improve accuracy and reduce the cost. Utilizing the fact that spectral methods excel (time steps are allowed to be large) in homogeneous and smooth media, the residual implementation based on velocity perturbation optimizes the use of this feature. Most of the other implementations based on the spectral approach are focussed on reducing cost by reducing the number of inverse Fourier transforms required in every step of the spectral-based implementation. The approach here fixes that by improving the accuracy of each, potentially longer, time step.

  19. Residual magnetic field in rotary machines; Campo magnetico residual en maquinas rotatorias

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez V, Esteban A; Apanco R, Marcelino [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2007-07-01

    The residual magnetism is a phenomenon in which the magnetic dipoles of a substance are oriented in a certain degree. On the other hand, when internal forces exist capable of aligning elementary magnetic dipoles of a material, a permanent magnet is obtained. Just as in a conductor or in a material, in the elements of a rotary electrical machine magnetic fields can be induced that produce a residual magnetism or magnetization. In the rotary electrical machines, the magnetization phenomenon causes serious problems, such as the generation of induced currents that propitiate the mechanical wear in bearings, collars, trunnions and inclusive in the shaft, by effects known as pitting, frosting and spark tracks, as well as erroneous readings in vibration and temperature sensors, that in some cases can cause the shut down of the machine. In this article are presented the general concepts on the residual magnetism in rotary electrical machines, the causes that originate it and the problems that arises, as well as the demagnetization of the components that have residual magnetic field. The results obtained by the area of Electrical Equipment of the Instituto de Investigaciones Electricas are revised, during the execution of activities related to the measurement and elimination of the residual magnetic field in rotary electrical machines. [Spanish] El magnetismo residual es un fenomeno en el que los dipolos magneticos de una sustancia se encuentran orientados en un grado determinado. Por otro lado, cuando existen fuerzas internas capaces de alinear los dipolos magneticos elementales de un material, se tiene un iman permanente. Al igual que en un conductor o un material, en los elementos de una maquina electrica rotatoria se pueden inducir campos magneticos que producen un magnetismo residual o magnetizacion. En las maquinas electricas rotatorias, el fenomeno de magnetizacion causa graves problemas, como la generacion de corrientes inducidas que propician el desgaste mecanico

  20. Identification of NAD interacting residues in proteins

    Directory of Open Access Journals (Sweden)

    Raghava Gajendra PS

    2010-03-01

    Full Text Available Abstract Background Small molecular cofactors or ligands play a crucial role in the proper functioning of cells. Accurate annotation of their target proteins and binding sites is required for the complete understanding of reaction mechanisms. Nicotinamide adenine dinucleotide (NAD+ or NAD is one of the most commonly used organic cofactors in living cells, which plays a critical role in cellular metabolism, storage and regulatory processes. In the past, several NAD binding proteins (NADBP have been reported in the literature, which are responsible for a wide-range of activities in the cell. Attempts have been made to derive a rule for the binding of NAD+ to its target proteins. However, so far an efficient model could not be derived due to the time consuming process of structure determination, and limitations of similarity based approaches. Thus a sequence and non-similarity based method is needed to characterize the NAD binding sites to help in the annotation. In this study attempts have been made to predict NAD binding proteins and their interacting residues (NIRs from amino acid sequence using bioinformatics tools. Results We extracted 1556 proteins chains from 555 NAD binding proteins whose structure is available in Protein Data Bank. Then we removed all redundant protein chains and finally obtained 195 non-redundant NAD binding protein chains, where no two chains have more than 40% sequence identity. In this study all models were developed and evaluated using five-fold cross validation technique on the above dataset of 195 NAD binding proteins. While certain type of residues are preferred (e.g. Gly, Tyr, Thr, His in NAD interaction, residues like Ala, Glu, Leu, Lys are not preferred. A support vector machine (SVM based method has been developed using various window lengths of amino acid sequence for predicting NAD interacting residues and obtained maximum Matthew's correlation coefficient (MCC 0.47 with accuracy 74.13% at window length 17

  1. Environmental assessment of incinerator residue utilisation

    Energy Technology Data Exchange (ETDEWEB)

    Toller, Susanna

    2008-10-15

    In Sweden, utilisation of incinerator residues outside disposal areas is restricted by environmental concerns, as such residues commonly contain greater amounts of potentially toxic trace elements than the natural materials they replace. On the other hand, utilisation can also provide environmental benefits by decreasing the need for landfill and reducing raw material extraction. This thesis provides increased knowledge and proposes better approaches for environmental assessment of incinerator residue utilisation, particularly bottom ash from municipal solid waste incineration (MSWI). A life cycle assessment (LCA) based approach was outlined for environmental assessment of incinerator residue utilisation, in which leaching of trace elements as well as other emissions to air and water and the use of resources were regarded as constituting the potential environmental impact from the system studied. Case studies were performed for i) road construction with or without MSWI bottom ash, ii) three management scenarios for MSWI bottom ash and iii) three management scenarios for wood ash. Different types of potential environmental impact predominated in the activities of the system and the scenarios differed in use of resources and energy. Utilising MSWI bottom ash in road construction and recycling of wood ash on forest land saved more natural resources and energy than when these materials were managed according to the other scenarios investigated, including dumping in landfill. There is a potential for trace element leaching regardless of how the ash is managed. Trace element leaching, particularly of copper (Cu), was identified as being relatively important for environmental assessment of MSWI bottom ash utilisation. CuO is suggested as the most important type of Cu-containing mineral in weathered MSWI bottom ash, whereas in the leachate Cu is mainly present in complexes with dissolved organic matter (DOM). The hydrophilic components of the DOM were more important for Cu

  2. Leaching from municipal solid waste incineration residues

    Energy Technology Data Exchange (ETDEWEB)

    Hyks, J.

    2008-02-15

    Leaching of pollutants from Municipal Solid Waste Incineration (MSWI) residues has been investigated combining a range of laboratory leaching experiments with geochemical modeling. Special attention was paid to assessing the applicability of laboratory data for subsequent modeling with respect to presumed full-scale conditions; both sample pretreatment and actual influence of leaching conditions on the results of laboratory experiments were considered. It was shown that sample pretreatment may have large impact on leaching test data. In particular, a significant fraction of Pb was shown mobile during the washing of residues with water. In addition, drying of residues (i.e. slow oxidation) prior to leaching experiments increased the leaching of Cr significantly. Significant differences regarding the leaching behavior of individual elements with respect to (non)equilibrium conditions in column percolation experiments were observed in the study. As a result, three groups of elements were identified based on the predominant leaching control and the influence of (non)equilibrium on the results of the laboratory column experiments: I. Predominantly availability-controlled elements (e.g. Na, K, Cl) II. Solubility-controlled elements (e.g. Ca, S, Si, Al, Ba, and Zn) III. Complexation-controlled elements (e.g. Cu and Ni) With respect to the above groups it was suggested that results of laboratory column experiments can, with consideration, be used to estimate full-scale leaching of elements from Group I and II. However, in order to avoid large underestimations in the assessment of leaching from Group III, it is imperative to describe the time-dependent transport of dissolved organic carbon (DOC) in the tested system or to minimize the physical non-equilibrium during laboratory experiments (e.g. bigger column, slower flow velocity). Forward geochemical modeling was applied to simulate long-term release of elements from a MSWI air-pollution-control residue. Leaching of a

  3. On the Structural Context and Identification of Enzyme Catalytic Residues

    Directory of Open Access Journals (Sweden)

    Yu-Tung Chien

    2013-01-01

    Full Text Available Enzymes play important roles in most of the biological processes. Although only a small fraction of residues are directly involved in catalytic reactions, these catalytic residues are the most crucial parts in enzymes. The study of the fundamental and unique features of catalytic residues benefits the understanding of enzyme functions and catalytic mechanisms. In this work, we analyze the structural context of catalytic residues based on theoretical and experimental structure flexibility. The results show that catalytic residues have distinct structural features and context. Their neighboring residues, whether sequence or structure neighbors within specific range, are usually structurally more rigid than those of noncatalytic residues. The structural context feature is combined with support vector machine to identify catalytic residues from enzyme structure. The prediction results are better or comparable to those of recent structure-based prediction methods.

  4. Utilization of corn residues for production of the polysaccharide schizophyllan

    Science.gov (United States)

    Abundant corn residues include fiber from wet milling operations and distillers' dried grains from dry grind ethanol plants. Biorefineries of the future will utilize such residues for the production of valuable bioproducts, particularly those traditionally produced from fossil fuels. Schizophyllan...

  5. (DDT) and hexachlorohexane (HCH) pesticide residues in foodstuffs ...

    African Journals Online (AJOL)

    Dichloro-diphenyl-trichloro-ethane (DDT) and hexachlorohexane (HCH) pesticide residues in foodstuffs from markets in Ile-Ife, Nigeria. ... International Journal of Biological and Chemical Sciences ... Keywords: Dichlorodiphenyltrichloroethane, hexachlorocyclohexane, pesticide, residue, cowpea grain, yam chip.

  6. A Qualitative Interpretation of Residual Magnetic Anomaly using ...

    African Journals Online (AJOL)

    A Qualitative Interpretation of Residual Magnetic Anomaly using Ground ... The magnetic data was collected using a G816 proton precision magnetometer. ... Analysis of residual anomaly graph reveals the existence of some structural features ...

  7. Effect of routine preoperative fasting on residual gastric volume and ...

    African Journals Online (AJOL)

    2016-02-10

    Feb 10, 2016 ... Key words: Fasting, myomectomy, pH, residual gastric volume. Date of Acceptance: ... gastric volume and acid in patients undergoing myomectomy. Niger J Clin ..... of gastric residual volume: A simulated, controlled study.

  8. Identification of residue pairing in interacting β-strands from a predicted residue contact map.

    Science.gov (United States)

    Mao, Wenzhi; Wang, Tong; Zhang, Wenxuan; Gong, Haipeng

    2018-04-19

    Despite the rapid progress of protein residue contact prediction, predicted residue contact maps frequently contain many errors. However, information of residue pairing in β strands could be extracted from a noisy contact map, due to the presence of characteristic contact patterns in β-β interactions. This information may benefit the tertiary structure prediction of mainly β proteins. In this work, we propose a novel ridge-detection-based β-β contact predictor to identify residue pairing in β strands from any predicted residue contact map. Our algorithm RDb 2 C adopts ridge detection, a well-developed technique in computer image processing, to capture consecutive residue contacts, and then utilizes a novel multi-stage random forest framework to integrate the ridge information and additional features for prediction. Starting from the predicted contact map of CCMpred, RDb 2 C remarkably outperforms all state-of-the-art methods on two conventional test sets of β proteins (BetaSheet916 and BetaSheet1452), and achieves F1-scores of ~ 62% and ~ 76% at the residue level and strand level, respectively. Taking the prediction of the more advanced RaptorX-Contact as input, RDb 2 C achieves impressively higher performance, with F1-scores reaching ~ 76% and ~ 86% at the residue level and strand level, respectively. In a test of structural modeling using the top 1 L predicted contacts as constraints, for 61 mainly β proteins, the average TM-score achieves 0.442 when using the raw RaptorX-Contact prediction, but increases to 0.506 when using the improved prediction by RDb 2 C. Our method can significantly improve the prediction of β-β contacts from any predicted residue contact maps. Prediction results of our algorithm could be directly applied to effectively facilitate the practical structure prediction of mainly β proteins. All source data and codes are available at http://166.111.152.91/Downloads.html or the GitHub address of https://github.com/wzmao/RDb2C .

  9. Mapping allostery through computational glycine scanning and correlation analysis of residue-residue contacts.

    Science.gov (United States)

    Johnson, Quentin R; Lindsay, Richard J; Nellas, Ricky B; Fernandez, Elias J; Shen, Tongye

    2015-02-24

    Understanding allosteric mechanisms is essential for the physical control of molecular switches and downstream cellular responses. However, it is difficult to decode essential allosteric motions in a high-throughput scheme. A general two-pronged approach to performing automatic data reduction of simulation trajectories is presented here. The first step involves coarse-graining and identifying the most dynamic residue-residue contacts. The second step is performing principal component analysis of these contacts and extracting the large-scale collective motions expressed via these residue-residue contacts. We demonstrated the method using a protein complex of nuclear receptors. Using atomistic modeling and simulation, we examined the protein complex and a set of 18 glycine point mutations of residues that constitute the binding pocket of the ligand effector. The important motions that are responsible for the allostery are reported. In contrast to conventional induced-fit and lock-and-key binding mechanisms, a novel "frustrated-fit" binding mechanism of RXR for allosteric control was revealed.

  10. Trends and advances in pesticide residue analysis | Yeboah ...

    African Journals Online (AJOL)

    The nature, origin and the economic significance of pesticide residues are reviewed to underscore the need for countries to develop the ability and capacity to monitor pesticide residues. An overview of pesticide residues analytical procedures is also presented with emphasis on thin layer chromatography (TLC) as an ...

  11. 40 CFR 180.342 - Chlorpyrifos; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Chlorpyrifos; tolerances for residues... § 180.342 Chlorpyrifos; tolerances for residues. (a) General. (1) Tolerances are established for residues of the pesticide chlorpyrifos per se (O,O-diethyl- O-(3,5,6-trichloro-2-pyridyl) phosphorothioate...

  12. 40 CFR 180.106 - Diuron; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Diuron; tolerances for residues. 180... Diuron; tolerances for residues. (a) General. Tolerances are established for the combined residues of the herbicide diuron, 3-(3,4-dichlorophenyl)-1,1-dimethylurea and its metabolites convertible to 3,4...

  13. Focus on agricultural residues: Microstructure of almond hull (abstract)

    Science.gov (United States)

    Agricultural residues have historically been used as animal feed or burned for disposal. These residues, therefore, have little economic value and may end up becoming disposal problems because tighter air quality control measures may limit burning of the residues. Therefore, value-added products mad...

  14. 40 CFR 180.586 - Clothianidin; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Clothianidin; tolerances for residues... § 180.586 Clothianidin; tolerances for residues. (a) General. Tolerances are established for residues of the insecticide clothianidin, including its metabolites and degradates. Compliance with the tolerance...

  15. Carbaryl residues in cottonseed products in the Philippines

    International Nuclear Information System (INIS)

    Pablo, F.E.

    1981-01-01

    Residues of carbaryl in cottonseed products were determined by spectrophotometry. Carbaryl residues in oil and cake were 0.83 and 0.04 mg/kg respectively. Parallel experiments with 14 C-carbaryl gave comparable results. 14 C-carbaryl residues in oil and cake were 0.42 and 0.15 mg/kg respectively. (author)

  16. Development of a SERS aptasensor for detection of medical residues

    DEFF Research Database (Denmark)

    Frøhling, Kasper Bayer

    Low levels of medical residues in environmental, industrial and domestic water systems is a growing concern. The biosensor industry is trying to accomodate the need of sensitive and specific sensor systems capable of ultra-low level detection of medical residues. In this PhD project a surface...... for sensitive and selective capture of medical residues....

  17. Applications of bauxite residue: A mini-review.

    Science.gov (United States)

    Verma, Ajay S; Suri, Narendra M; Kant, Suman

    2017-10-01

    Bauxite residue is the waste generated during alumina production by Bayer's process. The amount of bauxite residue (40-50 wt%) generated depends on the quality of bauxite ore used for the processing. High alkalinity and high caustic content in bauxite residue causes environmental risk for fertile soil and ground water contamination. The caustic (NaOH) content in bauxite residue leads to human health risks, like dermal problems and irritation to eyes. Moreover, disposal of bauxite residue requires a large area; such problems can only be minimised by utilising bauxite residue effectively. For two decades, bauxite residue has been used as a binder in cement industries and filler/reinforcement for composite materials in the automobile industry. Valuable metals and oxides, like alumina (Al 2 O 3 ), titanium oxide (TiO 2 ) and iron oxide Fe 2 O 3 , were extracted from bauxite residue to reduce waste. Bauxite residue was utilised in construction and structure industries to make geopolymers. It was also used in the making of glass-ceramics and a coating material. Recently bauxite residue has been utilised to extract rare earth elements like scandium (Sc), yttrium (Y), lanthanum (La), cerium (Ce), neodymium (Nd) and dysprosium (Dy). In this review article, the mineralogical characteristics of bauxite residue are summarised and current progresses on utilisation of bauxite residue in different fields of science and engineering are presented in detail.

  18. 40 CFR 158.1410 - Residue chemistry data requirements table.

    Science.gov (United States)

    2010-07-01

    ... table. 158.1410 Section 158.1410 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... example, most products used in or near kitchens require residue data for risk assessment purposes even... NR PAIRA 7 Analytical methods 860.1340 Residue analytical methods R R R CR CR Residue of concern 1, 3...

  19. 40 CFR 279.67 - Management of residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Management of residues. 279.67 Section 279.67 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED... for Energy Recovery § 279.67 Management of residues. Burners who generate residues from the storage or...

  20. 40 CFR 279.47 - Management of residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Management of residues. 279.47 Section 279.47 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED... Management of residues. Transporters who generate residues from the storage or transport of used oil must...

  1. 40 CFR 279.59 - Management of residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Management of residues. 279.59 Section 279.59 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES (CONTINUED... Management of residues. Owners and operators who generate residues from the storage, processing, or re...

  2. 40 CFR 180.511 - Buprofezin; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Buprofezin; tolerances for residues... § 180.511 Buprofezin; tolerances for residues. (a) General. Tolerances are established for residues of buprofezin, including its metabolites and degradates in or on the commodities in the table below. Compliance...

  3. Cover crop residue management for optimizing weed control

    NARCIS (Netherlands)

    Kruidhof, H.M.; Bastiaans, L.; Kropff, M.J.

    2009-01-01

    Although residue management seems a key factor in residue-mediated weed suppression, very few studies have systematically compared the influence of different residue management strategies on the establishment of crop and weed species. We evaluated the effect of several methods of pre-treatment and

  4. 40 CFR 721.9635 - Terpene residue distillates.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Terpene residue distillates. 721.9635... Substances § 721.9635 Terpene residue distillates. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as terpene residue distillates (PMN P-96-897...

  5. 12 CFR 23.21 - Estimated residual value.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Estimated residual value. 23.21 Section 23.21...) Leases § 23.21 Estimated residual value. (a) Recovery of investment and costs. A national bank's estimate of the residual value of the property that the bank relies upon to satisfy the requirements of a full...

  6. Logging residues under different stand and harvesting conditions, Rocky Mountains

    Science.gov (United States)

    Robert E. Benson; Cameron M. Johnston

    1976-01-01

    Volume and characteristics of logging residues from 34 harvest areas are presented. Clearcuts and partial cuts logged to conventional utilization levels and to close utilization levels are included. Residue volumes ranged from almost 3, 600 ft3 /acre of wood 3-inches-plus down to about 550 ft3 /acre, depending on treatment. More than 60 percent of the residues were...

  7. Theoretical and experimental investigations of on-board control of combustion air and/or fuel for emission reduction in internal combustion engines. Final report; Durchfuehrung theoretischer und experimenteller Untersuchungen zu den Moeglichkeiten der On-Board-Beeinflussung der Verbrennungsluftzusammensetzung und/oder des Kraftstoffs fuer Verbrennungsmotoren mit dem Ziel der Emissionsminderung. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Velji, A.; Hofmann, U.

    2001-11-01

    Theoretical and experimental investigations were made in order to find the optimal composition of combustion air for simultaneous reduction of NOx and particulate emissions. The effect was found to be in the same order of magnitude as with exhaust recirculation. 'Optimized' air should have an oxygen content of more than 20 percent and a CO2 content of more than 10 percent, with nitrogen more or less accounting for the rest. [German] Ausgehend von der Abgasrueckfuehrung wurde in theoretischen und experimentellen Untersuchungen die optimale Zusammensetzung der Verbrennungsluft zur gleichzeitigen Reduktion der NO{sub x}- und Partikelemission ermittelt. Es konnte gezeigt werden, dass es mit dieser Verbrennungsluft moeglich ist, eine aehnlich hohe NO{sub x}-Reduktion wie bei der Abgasrueckfuehrung zu erzielen, ohne dass die Partikelemission drastisch ansteigt. Die 'optimale' Verbrennungsluft muss einen Sauerstoffgehalt groesser als 20% und einen CO{sub 2}-Gehalt groesser als 10% aufweisen. Der Rest besteht im Wesentlichen aus Stickstoff. (orig.)

  8. Prediction of interface residue based on the features of residue interaction network.

    Science.gov (United States)

    Jiao, Xiong; Ranganathan, Shoba

    2017-11-07

    Protein-protein interaction plays a crucial role in the cellular biological processes. Interface prediction can improve our understanding of the molecular mechanisms of the related processes and functions. In this work, we propose a classification method to recognize the interface residue based on the features of a weighted residue interaction network. The random forest algorithm is used for the prediction and 16 network parameters and the B-factor are acting as the element of the input feature vector. Compared with other similar work, the method is feasible and effective. The relative importance of these features also be analyzed to identify the key feature for the prediction. Some biological meaning of the important feature is explained. The results of this work can be used for the related work about the structure-function relationship analysis via a residue interaction network model. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Alcohol biodiesel from frying oil residues; Biodiesel etilico a partir de oleo de fritura residual

    Energy Technology Data Exchange (ETDEWEB)

    Festa, Brunna Simoes; Marques, Luiz Guilherme da Costa [Universidade Federal do Rio de Janeiro (IVIG/COPPE/UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia. Inst. Virtual Internacional de Mudancas Globais], E-mail: lguilherme@ivig.coppe.ufrj.br

    2010-07-01

    This paper describes the reaction optimization and production of biodiesel through the use of frying residual oil made available by the restaurant placed at the PETROBRAS Research Center (CENPES-RJ), using ethanol, so that to permit the production of sustainable bio diesel. The environmental gains obtained by the utilization of residual oil, avoiding that this oil be released in the nature, and the economic gains coming from the generation and utilization of ethanol allowing the production of biodiesel be an viable alternative. The obtained results during laboratory tests shown that biodiesel produced from the transesterification in alkaline medium, of the frying residual oil collected presented a reaction yield of approximately 80% considering in mass.

  10. Laboratory studies of the properties of in-situ burn residues: chemical composition of residues

    International Nuclear Information System (INIS)

    Trudel, B.K.; Buist, I.A.; Schatzke, D.; Aurand, D.

    1996-01-01

    The chemical composition of the residue from small-scale burns of thick oil slicks was studied. The objective was to describe the changes in chemical composition in oils burning on water and to determine how these changes were influenced by the condition of the burn. Small-scale test burns involved burning 40-cm diameter pools of oil on water. A range of eight oil types including seven crude oils and an automotive diesel were burned. For each oil, slicks of fresh oil of three different thicknesses were tested. Two of the oils were tested before and after weathering. Results showed that the composition of the residue differed greatly from the parent oil. Asphaltenes, high-boiling-point aromatics and resins remained concentrated in the burn residue. The burning of slicks appeared to remove most of the lower-molecular weight aromatic hydrocarbons which included the more toxic and more bioavailable components of the crude oils. 11 refs., 6 tabs

  11. Mapping residual stress by ultrasonic tomography

    International Nuclear Information System (INIS)

    Hildebrand, B.P.; Harrington, T.P.

    1979-01-01

    It is known that internal stress concentrations can give rise to microcracks which then grow when the structure is subjected to external forces. It has also been found that the velocity of sound is altered as it propagates through a region of stress. In this paper a technique called Computer-Assisted Tomography (CAT) is discussed and an application that provides pictures of stress fields is described. The results of both simulated and experimental models used to evaluate the technique are reported. It is concluded that the CAT approach has great potential for locating and mapping residual stress in metals. (author)

  12. Residue number systems theory and applications

    CERN Document Server

    Mohan, P V Ananda

    2016-01-01

    This new and expanded monograph improves upon Mohan's earlier book, Residue Number Systems (Springer, 2002) with a state of the art treatment of the subject. Replete with detailed illustrations and helpful examples, this book covers a host of cutting edge topics such as the core function, the quotient function, new Chinese Remainder theorems, and large integer operations. It also features many significant applications to practical communication systems and cryptography such as FIR filters and elliptic curve cryptography. Starting with a comprehensive introduction to the basics and leading up to current research trends that are not yet widely distributed in other publications, this book will be of interest to both researchers and students alike.

  13. Anaerobic digestion of cider apple residues

    Energy Technology Data Exchange (ETDEWEB)

    Contreras Lopez, A. (E.T.S.I.I., U.N.E.D., Madrid (Spain). Dept. Quimica Applicada a la Ingenieria); Lopez Bobo, R. (E.T.S. Ingeneiros Industriales, Asturias (Spain). Dept. de Energia)

    1992-12-01

    Apple residue from the cider industry is used here for anaerobic fermentation. The effect of retention time and volatile solids concentration on the production of biogas and methane was investigated by using continuously mixed anaerobic fermentors with a working volume of 1 1. The maximum proportions of biogas and methane obtained were 430 1 biogas/kg per day (12 days' retention time and 3% of volatile solids) and 281 1 of methane per day (a retention time of 30 days and 2% of volatile solids), respectively. (author)

  14. Residual radioactive material guidelines: Methodology and applications

    International Nuclear Information System (INIS)

    Yu, C.; Yuan, Y.C.; Zielen, A.J.; Wallo, A. III.

    1989-01-01

    A methodology to calculate residual radioactive material guidelines was developed for the US Department of Energy (DOE). This methodology is coded in a menu-driven computer program, RESRAD, which can be run on IBM or IBM-compatible microcomputers. Seven pathways of exposure are considered: external radiation, inhalation, and ingestion of plant foods, meat, milk, aquatic foods, and water. The RESRAD code has been applied to several DOE sites to calculate soil cleanup guidelines. This experience has shown that the computer code is easy to use and very user-friendly. 3 refs., 8 figs

  15. Iterative Regularization with Minimum-Residual Methods

    DEFF Research Database (Denmark)

    Jensen, Toke Koldborg; Hansen, Per Christian

    2007-01-01

    subspaces. We provide a combination of theory and numerical examples, and our analysis confirms the experience that MINRES and MR-II can work as general regularization methods. We also demonstrate theoretically and experimentally that the same is not true, in general, for GMRES and RRGMRES their success......We study the regularization properties of iterative minimum-residual methods applied to discrete ill-posed problems. In these methods, the projection onto the underlying Krylov subspace acts as a regularizer, and the emphasis of this work is on the role played by the basis vectors of these Krylov...... as regularization methods is highly problem dependent....

  16. Iterative regularization with minimum-residual methods

    DEFF Research Database (Denmark)

    Jensen, Toke Koldborg; Hansen, Per Christian

    2006-01-01

    subspaces. We provide a combination of theory and numerical examples, and our analysis confirms the experience that MINRES and MR-II can work as general regularization methods. We also demonstrate theoretically and experimentally that the same is not true, in general, for GMRES and RRGMRES - their success......We study the regularization properties of iterative minimum-residual methods applied to discrete ill-posed problems. In these methods, the projection onto the underlying Krylov subspace acts as a regularizer, and the emphasis of this work is on the role played by the basis vectors of these Krylov...... as regularization methods is highly problem dependent....

  17. Agricultural Residues and Biomass Energy Crops

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-06-01

    There are many opportunities to leverage agricultural resources on existing lands without interfering with production of food, feed, fiber, or forest products. In the recently developed advanced biomass feedstock commercialization vision, estimates of potentially available biomass supply from agriculture are built upon the U.S. Department of Agriculture’s (USDA’s) Long-Term Forecast, ensuring that existing product demands are met before biomass crops are planted. Dedicated biomass energy crops and agricultural crop residues are abundant, diverse, and widely distributed across the United States. These potential biomass supplies can play an important role in a national biofuels commercialization strategy.

  18. Lifetime and residual strength of materials

    DEFF Research Database (Denmark)

    Nielsen, Lauge Fuglsang

    1997-01-01

    of load amplitude, load average, fractional time under maximum load, and load frequency.The analysis includes prediction of residual strength (re-cycle strength) during the process of load cycling. It is concluded that number of cycles to failure is a very poor design criterion. It is demonstrated how...... the theory developed can be generalized also to consider non-harmonic load variations.Algorithms are presented for design purposes which may be suggested as qualified alternatives to the Palmgren-Miner's methods normally used in fatigue analysis of materials under arbitrary load variations. Prediction...

  19. Residual Stress Induced by Nitriding and Nitrocarburizing

    DEFF Research Database (Denmark)

    Somers, Marcel A.J.

    2005-01-01

    The present chapter is devoted to the various mechanisms involved in the buildup and relief of residual stress in nitrided and nitrocarburized cases. The work presented is an overview of model studies on iron and iron-based alloys. Subdivision is made between the compound (or white) layer......, developing at the surfce and consisting of iron-based (carbo)nitrides, and the diffusion zone underneath, consisting of iron and alloying element nitrides dispersed in af ferritic matrix. Microstructural features are related directly to the origins of stress buildup and stres relief....

  20. Residual supersymmetry of compactified d = 10 supergravity

    International Nuclear Information System (INIS)

    Wit, B. de; Smit, D.J.; Hari Dass, N.D.

    1986-05-01

    The conditions for residual supersymmetry in compactified ten-dimensional supergravity theories are investigated, including the effect of a non-constant 'warp factor'. The analysis is based on on-shell transformation laws which implies that certain linear combinations of classical field equations must be satisfied. The conditions for superysymmetry are, in general, not very restrictive. When, in addition, one assumes the validity of Bianchi identities, two independent contractions of the Einstein equation are implied. These equations exclude d=4 de Sitter space; for compactifications to d=4 Minkowski space they only allow purely metric Ricci-flat field configurations with constant warp factor. (Auth.)

  1. Epimorphisms in Varieties of Residuated Structures

    Czech Academy of Sciences Publication Activity Database

    Bezhanishvili, G.; Moraschini, Tommaso; Raftery, J.G.

    2017-01-01

    Roč. 492, 15 December (2017), s. 185-211 ISSN 0021-8693 R&D Projects: GA ČR GA17-04630S Institutional support: RVO:67985807 Keywords : Epimorphism * Brouwerian algebra * Heyting algebra * Esakia space * Residuated lattice * Sugihara monoid * Substructural logic * Intuitionistic logic * Relevance logic * R-mingle * Beth definability Subject RIV: BA - General Mathematics OBOR OECD: Computer sciences, information science, bioinformathics (hardware development to be 2.2, social aspect to be 5.8) Impact factor: 0.610, year: 2016

  2. Reactivity of Athabasca residue and of its SARA fractions during residue hydroconversion

    Energy Technology Data Exchange (ETDEWEB)

    Verstraete, J.; Danial-Fortain, P.; Gauthier, T.; Merdrignac, I. [IFP-Lyon, Vermaison (France); Budzinski, H. [Bordeaux Univ. (France). ISM-LPTC, UMR CNRS

    2009-07-01

    Residue conversion processes are becoming increasingly important because of the declining market for residual fuel oil and a greater demand for middle distillates. Ebullated-bed hydroconversion is a commercially proven technology for converting heavy feedstocks with high amounts of impurities. The process enables the conversion of atmospheric or vacuum residues at temperatures up to 440 degrees C, and at liquid hourly space velocity (LHSV) conditions in the range of 0.15 to 0.5 per hour. A 540 degrees C conversion of up to 80 weight per cent can be achieved under these conditions. This paper reported on a research study conducted at IFP Lyon in which the residue hydroconversion in a large-scale ebullated bed bench unit was investigated to determine the impact of operating conditions and feed properties on yield and product qualities. Hydrogen was added to the feed in the bench units to keep a high hydrogen partial pressure and favour the catalytic hydroconversion reactions. In a typical test, the reactor was fed with 50 g of feedstock and 0.45 g of crushed equilibrium industrial NiMo catalyst, pressurized hydrogen and quickly heated at the reaction temperature. This paper also discussed the conversion of Athabasca bitumen residue in the large-scale pilot plant and also in the small scale batch reactor. The effect of operating temperature and space velocity was examined. The reactivity of the saturates, aromatics, resins and asphaltenes (SARA) fractions of the bitumen was studied separately in order to better understand the conversion mechanisms and reactivities. The Athabasca bitumen feed and SARA fractions were also analyzed in terms of standard petroleum analysis, SARA fractionation, elemental analysis, size exclusion chromatography (SEC) and 13C NMR. Hydroconversion experiments were conducted in the batch unit at different reaction temperatures and reaction times. A comparison of small-scale batch results with those obtained with the continuous large-scale bench

  3. PENETAPAN RESIDU DAN PERKIRAAN PENETAPAN BATAS MAKSIMUM RESIDU (BMR ORGANOKLORIN PADA SIMPLISIA

    Directory of Open Access Journals (Sweden)

    Ani Isnawati

    2012-10-01

    Full Text Available Penggunaaan bahan obat tradisional (simplisia untuk skala industri dan peningkatan produksi tanaman obat dalam skala besar menjadi tidak ekonomis tanpa pestisida. Disatu sisi penggunaan pestisida dapat menguntungkan yaitu menyebabkan toksis pada hama namun disisi lain toksisitas dapat terjadi juga pada manusia, sehingga residu pestisida dalam tanaman obat yang dikonsumsi dalam jangka panjang akan merugikan kesehatan. Batas maksimum Residu (BMR pestisida dalam simplisia baik di Indonesia maupun di negara lain belum ditetapkan. Sehingga untuk itu untuk mengetahui adanya residu pestisida jenis organoklorin yang telah dilarang penggunaannya melalui Permentan No.434.1/kpts/TP.270/7/2001 dan untuk mengetahui batas keamanannya, maka perlu dilakukan penetapan residu organoklorin dalam simplisia dan menetapkan batas keamanan berdasarkan perhitungan secara teoritis. Pengujian residu dilakukan terhadap golongan pestisida organoklorin pada 4 jenis simplisia (daun wungu (Graptophyllum pictum (L Grifl, daun sambiloto Andrographis paniculata Ness, herba pegagan (Centella  asiatica (L Urban, daun tempuyung (Sonchus arvensis (L yang berasal dari 3 lokasi penanaman, yaitu : perkebunan Tanaman Obat Manako (Jawa Barat, Balai Penelitian Tanaman Obat Tawangmangu (BPTO di Jawa Tengah dan Perkebunan Tanaman Obat Purwodadi (Jawa Timur. Pemeriksaan residu pestisida organoklorin menggunakan kromatografi gas dan perhitungan batas keamanan dihitung dengan adanya nilai ADI (Acceptable daily intake yang telah ditetapkan bersama antara JAO dan WHO serta perkiraan banyaknya konsumsi simplisia. Hasil Pengujian residu pestisida organoklorin diperoleh bahwa simplisia daun Wungu (Tawangmangu mengandung residu lindan dengan kadar 0,24 mg/kg, pegagan (Purwodadi, mengandung lindan 0,36 mg/kg dan aldrin 0,31 mg/kg serta pegagan (Manako mengandung heptaklor 0,15 mg/kg dan op-DDE 0,11 mg/kg. Adapun penghitungan BMR heptaklor dan lindan secara teoritis dengan asumsi rata

  4. Modelling of the Residual Stress State in a new Type of Residual Stress Specimen

    DEFF Research Database (Denmark)

    Jakobsen, Johnny; Andreasen, Jens Henrik

    2014-01-01

    forms the experimental case which is analysed. A FE model of the specimen is used for analysing the curing history and the residual stress build up. The model is validated against experimental strain data which are recorded by a Fibre Brag Grating sensor and good agreement has been achieved.......The paper presents a study on a new type residual stress specimen which is proposed as a simple way to conduct experimental validation for model predictions. A specimen comprising of a steel plate with circular hole embedded into a stack of CSM glass fibre and further infused with an epoxy resin...

  5. Residual stress analysis in BWR pressure vessel attachments

    International Nuclear Information System (INIS)

    Dexter, R.J.; Leung, C.P.; Pont, D.

    1992-06-01

    Residual stresses from welding processes can be the primary driving force for stress corrosion cracking (SCC) in BWR components. Thus, a better understanding of the causes and nature of these residual stresses can help assess and remedy SCC. Numerical welding simulation software, such as SYSWELD, and material property data have been used to quantify residual stresses for application to SCC assessments in BWR components. Furthermore, parametric studies using SYSWELD have revealed which variables significantly affect predicted residual stress. Overall, numerical modeling techniques can be used to evaluate residual stress for SCC assessments of BWR components and to identify and plan future SCC research

  6. Measurement of residual stresses using fracture mechanics weight functions

    International Nuclear Information System (INIS)

    Fan, Y.

    2000-01-01

    A residual stress measurement method has been developed to quantify through-the-thickness residual stresses. Accurate measurement of residual stresses is crucial for many engineering structures. Fabrication processes such as welding and machining generate residual stresses that are difficult to predict. Residual stresses affect the integrity of structures through promoting failures due to brittle fracture, fatigue, stress corrosion cracking, and wear. In this work, the weight function theory of fracture mechanics is used to measure residual stresses. The weight function theory is an important development in computational fracture mechanics. Stress intensity factors for arbitrary stress distribution on the crack faces can be accurately and efficiently computed for predicting crack growth. This paper demonstrates that the weight functions are equally useful in measuring residual stresses. In this method, an artificial crack is created by a thin cut in a structure containing residual stresses. The cut relieves the residual stresses normal to the crack-face and allows the relieved residual stresses to deform the structure. Strain gages placed adjacent to the cut measure the relieved strains corresponding to incrementally increasing depths of the cut. The weight functions of the cracked body relate the measured strains to the residual stresses normal to the cut within the structure. The procedure details, such as numerical integration of the singular functions in applying the weight function method, will be discussed

  7. Measurement of residual stresses using fracture mechanics weight functions

    International Nuclear Information System (INIS)

    Fan, Y.

    2001-01-01

    A residual stress measurement method has been developed to quantify through-the-thickness residual stresses. Accurate measurement of residual stresses is crucial for many engineering structures. Fabrication processes such as welding and machining generate residual stresses that are difficult to predict. Residual stresses affect the integrity of structures through promoting failures due to brittle fracture, fatigue, stress corrosion cracking, and wear. In this work, the weight function theory of fracture mechanics is used to measure residual stresses. The weight function theory is an important development in computational fracture mechanics. Stress intensity factors for arbitrary stress distribution on the crack faces can be accurately and efficiently computed for predicting crack growth. This paper demonstrates that the weight functions are equally useful in measuring residual stresses. In this method, an artificial crack is created by a thin cut in a structure containing residual stresses. The cut relieves the residual stresses normal to the crack-face and allows the relieved residual stresses to deform the structure. Strain gages placed adjacent to the cut measure the relieved strains corresponding to incrementally increasing depths of the cut. The weight functions of the cracked body relate the measured strains to the residual stresses normal to the cut within the structure. The procedure details, such as numerical integration of the singular functions in applying the weight function method, will be discussed. (author)

  8. Improving residue-residue contact prediction via low-rank and sparse decomposition of residue correlation matrix.

    Science.gov (United States)

    Zhang, Haicang; Gao, Yujuan; Deng, Minghua; Wang, Chao; Zhu, Jianwei; Li, Shuai Cheng; Zheng, Wei-Mou; Bu, Dongbo

    2016-03-25

    Strategies for correlation analysis in protein contact prediction often encounter two challenges, namely, the indirect coupling among residues, and the background correlations mainly caused by phylogenetic biases. While various studies have been conducted on how to disentangle indirect coupling, the removal of background correlations still remains unresolved. Here, we present an approach for removing background correlations via low-rank and sparse decomposition (LRS) of a residue correlation matrix. The correlation matrix can be constructed using either local inference strategies (e.g., mutual information, or MI) or global inference strategies (e.g., direct coupling analysis, or DCA). In our approach, a correlation matrix was decomposed into two components, i.e., a low-rank component representing background correlations, and a sparse component representing true correlations. Finally the residue contacts were inferred from the sparse component of correlation matrix. We trained our LRS-based method on the PSICOV dataset, and tested it on both GREMLIN and CASP11 datasets. Our experimental results suggested that LRS significantly improves the contact prediction precision. For example, when equipped with the LRS technique, the prediction precision of MI and mfDCA increased from 0.25 to 0.67 and from 0.58 to 0.70, respectively (Top L/10 predicted contacts, sequence separation: 5 AA, dataset: GREMLIN). In addition, our LRS technique also consistently outperforms the popular denoising technique APC (average product correction), on both local (MI_LRS: 0.67 vs MI_APC: 0.34) and global measures (mfDCA_LRS: 0.70 vs mfDCA_APC: 0.67). Interestingly, we found out that when equipped with our LRS technique, local inference strategies performed in a comparable manner to that of global inference strategies, implying that the application of LRS technique narrowed down the performance gap between local and global inference strategies. Overall, our LRS technique greatly facilitates

  9. Will Incremental Hemodialysis Preserve Residual Function and Improve Patient Survival?

    Science.gov (United States)

    Davenport, Andrew

    2015-01-01

    The progressive loss of residual renal function in peritoneal dialysis patients is associated with increased mortality. It has been suggested that incremental dialysis may help preserve residual renal function and improve patient survival. Residual renal function depends upon both patient related and dialysis associated factors. Maintaining patients in an over-hydrated state may be associated with better preservation of residual renal function but any benefit comes with a significant risk of cardiovascular consequences. Notably, it is only observational studies that have reported an association between dialysis patient survival and residual renal function; causality has not been established for dialysis patient survival. The tenuous connections between residual renal function and outcomes and between incremental hemodialysis and residual renal function should temper our enthusiasm for interventions in this area. PMID:25385441

  10. Eviromental Economic and Technological Residues Management Demands: An Optimization Tool.

    Directory of Open Access Journals (Sweden)

    Marisa Soares Borges

    2012-12-01

    Full Text Available Industrial residues management is a very demanding task since many different goals must be achieved. The combination of different approaches used by people from different stuff is very challenging activity that can misuse the residues potential value and applicability. An interactive WEB base tool, to integrate different sectors and overcome residues management difficulties will be presented. The system must be loaded with all data concerning the residue life cycle, and through data integration and modeling routine will give the best alternative as output. As wider and complete the system data becomes, by information loading from differen t segment, more efficient the residues management becomes. The user friendly tool will encourage the participation of industries, labs and research institutions to obtain qualified information about industrial residues inventory, raw materials recovery, characteristics, treatment and alternative uses, to achieve residues management sustainability.

  11. Pesticide residues in locally available cereals and vegetables

    International Nuclear Information System (INIS)

    Cunanan, S.A.; Santos, F.L.; Bonoan, L.S.

    1976-03-01

    Vegetable samples (pechay, cabbage, lettuce, green beans and tomatoes) bought from public markets in the Metro Manila area were analyzed for pesticide residues using gas chromatography. The samples analyzed in 1968-69 contained high levels of chlorinated pesticides such as DDT, Aldrin, Endrin, and Thiodan, while in the samples analyzed in January 1976, no chlorinated and organophosphate pesticides were detected. Cereal samples (rice, corn and sorghum) were obtained from the National Grains Authority and analyzed for pesticide residues and bromine residues. Total bromine residues was determined by neutron activation analysis. In most of the samples analyzed, the concentrations of pesticide residues were below the tolerance levels set by the FAO/WHO Committee on Pesticide Residues in Foods. An exception was one rice sample from Thailand, the bromine residue content (110ppm) of which exceeds the tolerance level of 50ppm

  12. Minimal Residual Disease in Acute Myeloid Leukemia

    Science.gov (United States)

    Hourigan, Christopher S.; Karp, Judith E.

    2014-01-01

    Technological advances in the laboratory have lead to substantial improvements in clinical decision-making by the use of pre-treatment prognostic risk stratification factors in acute myeloid leukemia (AML). Unfortunately similar progress has not been made in treatment response criteria, with the definition of “complete remission” in AML largely unchanged for over half a century. Several recent clinical trials have demonstrated that higher sensitivity measurements of residual disease burden during or after treatment can be performed, that results are predictive for clinical outcome and can be used to improve outcomes by guiding additional therapeutic intervention to patients in clinical complete remission but at increased relapse risk. We review here these recent trials, the characteristics and challenges of the modalities currently used to detect minimal residual disease (MRD), and outline opportunities to both refine detection and better clinically utilize MRD measurements. MRD measurement is already the standard of care in other myeloid malignancies such as chronic myelogenous leukemia (CML) and acute promyelocytic leukemia (APL). It is our belief that response criteria for non-APL AML should be updated to include assessment for molecular complete remission (mCR) and that recommendations for post-consolidation surveillance should include regular monitoring for molecular relapse as a standard of care. PMID:23799371

  13. Repairing an installation and processing the residues

    International Nuclear Information System (INIS)

    Malet, J.C.; Duverger de Cuy, G.; Sophy, Y.; Cucinotta, A.

    1989-01-01

    After a sodium leak in a locale, producing a fire, the operator's first concern is to repair the plant. Since the residual sodium and the products of combustion are chemically aggressive, the personnel will have to perform this operation in a hostile environment. This paper presents answers which can be given to the three questions which will however rise: When can the intervention begin? How will it be performed? What should be done with the residues of combustion? This document aims at presenting the different solutions to this problem, these solutions being derived from experiments carried out in France either in the Esmeralda Programme, which is managed jointly by CEA and ENEA, or in the other French programmes. As a general rule, the intervention inside the locale can be made much more easier if: it was foreseen right from the beginning of the design (access under the pipes, anchorage for handling, etc.); the incident can have been localised thanks to the monitoring of locales, enabling the video recording of the first instants, that is, as long as visibility does not fall to zero due to the aerosols from the fire. (author)

  14. Residual stress in ceramics and ceramic composites

    International Nuclear Information System (INIS)

    Oden, M.

    1992-01-01

    Residual stresses in Si 3 N 4 and SiC have been measured with X-ray diffraction after grinding and thermal shock. The produced surface stresses are compressive after both treatments. The stresses show a strong dependence on the quenching temperature up to a certain temperature when cracks relax the stresses. The influence of the amount of reinforcing phase on the residual stress state in a Al 2 O 3 /SiC whisker composite was investigated and correlated to a modified Eshelby model. The agreement is excellent. The composite was quenched in liquid He (4K) and the stress state measured after show no relaxation of stresses, indicating elastic behaviour. An in situ strain measurement as a function of temperature conducted on a Al 2 O 3 /SiC whisker composite and a SiC/TiB 2 particle composite show very good agreement with the Eshelby model for the Al 2 O 3 /SiC system but not agreement for the SiC/TiB 2 system. The reason is believed to be stress relaxation during sample preparation. (au) (53 refs., 24 figs., 14 tabs.)

  15. Research items regarding seismic residual risk evaluation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-15

    After learning the Fukushima Dai-ichi NPP severe accidents in 2011, the government investigation committee proposed the effective use of probabilistic safety assessment (PSA), and now it is required to establish new safety rules reflecting the results of probabilistic risk assessment (PRA) and proposed severe accident measures. Since the Seismic Design Guide has been revised on September 19, 2006, JNES has been discussing seismic PRA (Levels 1-3) methods to review licensees' residual risk assessment while preparing seismic PRA models. Meanwhile, new safety standards for light water reactors are to be issued and enforced on July 2013, which require the residual risk of tsunami, in addition to earthquakes, should be lowered as much as possible. The Fukushima accidents raised the problems related to risk assessment, e.g. approaches based on multi-hazard (earthquake and tsunami), multi-unit, multi-site, and equipment's common cause failure. This fiscal year, while performing seismic and/or tsunami PRA to work on these problems, JNES picked up the equipment whose failure greatly contribute to core damage, surveyed accident management measures on those equipment as well as effectiveness to reduce core damage probability. (author)

  16. Residues and world-sheet instantons

    International Nuclear Information System (INIS)

    Beasley, Chris; Witten, Edward

    2003-01-01

    We reconsider the question of which Calabi-Yau compactifications of the heterotic string are stable under world-sheet instanton corrections to the effective space-time superpotential. For instance, compactifications described by (0; 2) linear sigma models are believed to be stable, suggesting a remarkable cancellation among the instanton effects in these theories. Here, we show that this cancellation follows directly from a residue theorem, whose proof relies only upon the right-moving world-sheet supersymmetries and suitable compactness properties of the (0; 2) linear sigma model. Our residue theorem also extends to a new class of 'half-linear' sigma models. Using these half-linear models, we show that heterotic compactifications on the quintic hypersurface in CP 4 for which the gauge bundle pulls back from a bundle on CP 4 are stable. Finally, we apply similar ideas to compute the superpotential contributions from families of membrane instantons in M-theory compactifications on manifolds of G 2 holonomy. (author)

  17. Heating oil, distillates and residuals outlook

    International Nuclear Information System (INIS)

    Ervin, M.J.

    2004-01-01

    M.J. Ervin and Associates offers strategic planning support to the downstream petroleum industry in terms of price market monitoring, market analysis, media commentary and benchmarking of marketing operations. This presentation included graphs depicting supply and demand for heating oil distillates and residuals from the mid 1990s to 2004. It was noted that the long-term decline in residuals demand in the United States and Canada are due to environmental issues, the use of natural gas as an alternative, and the increasing complexity of refineries. Graphs depicting market impacts of refinery utilization and inventory trends showed that middle distillate production will increase at the expense of gasoline production. Middle distillates and gasoline markets will be more sensitive to supply disruptions, resulting in more frequent price spikes. Inventory trends indicate a greater reliance on product imports. The demand for heating fuel has stabilized due to the continued penetration of natural gas in eastern states and provinces. The demand for diesel fuel has growth 1.5 to 2 per cent while the demand for jet fuel has remained relatively flat and depends greatly on the growth of the gross national product (GNP). tabs., figs

  18. Profile Monitors Based on Residual Gas Interaction

    CERN Document Server

    Forck, P; Giacomini, T; Peters, A

    2005-01-01

    The precise determination of transverse beam profiles at high current hadron accelerators has to be performed non-interceptingly. Two methods will be discussed based on the excitation of the residual gas molecules by the beam particles: Firstly, by beam induced fluorescence (BIF) light is emitted from the residual gas molecules and is observed with an image intensified CCD camera. At most laboratories N2 gas is inserted, which has a large cross section for emission in the blue wave length region. Secondly, a larger signal strength is achieved by detecting the ionization products in an Ionization Profile Monitor (IPM). By applying an electric field all ionization products are accelerated toward a spatial resolving Micro-Channel Plate. The signal read-out can either be performed by observing the light from a phosphor screen behind the MCP or electronically by a wire array. Methods to achieve a high spatial resolution and a fast turn-by-turn readout capability are discussed. Even though various approaches at dif...

  19. Herbicide residues in grapes and wine.

    Science.gov (United States)

    Ying, G G; Williams, B

    1999-05-01

    The persistence of several common herbicides from grapes to wine has been studied. Shiraz, Tarrango and Doradillo grapes were separately sprayed with either norflurazon, oxyfluorfen, oxadiazon or trifluralin-persistent herbicides commonly used for weed control in vineyards. The dissipation of the herbicides from the grapes was followed for 28 days following treatment. Results showed that norflurazon was the most persist herbicide although there were detectable residues of all the herbicides on both red and white grapes at the end of the study period. The penetration of herbicides into the flesh of the grapes was found to be significantly greater for white grapes than for red grapes. Small-lot winemaking experiments showed that norflurazon persisted at levels close to the initial concentration through vinification and into the finished wine. The other herbicides degraded, essentially via first-order kinetics, within the period of "first fermentation" and had largely disappeared after 28 days. The use of charcoal together with filter pads, or with diatomaceous earth was shown to be very effective in removing herbicide residues from the wine. A 5% charcoal filter removed more than 96% of the norflurazon persisting in the treated wine.

  20. Lead sorption-desorption from organic residues.

    Science.gov (United States)

    Duarte Zaragoza, Victor M; Carrillo, Rogelio; Gutierrez Castorena, Carmen M

    2011-01-01

    Sorption and desorption are mechanisms involved in the reduction of metal mobility and bioavailability in organic materials. Metal release from substrates is controlled by desorption. The capacity of coffee husk and pulp residues, vermicompost and cow manure to adsorb Pb2+ was evaluated. The mechanisms involved in the sorption process were also studied. Organic materials retained high concentrations of lead (up to 36,000 mg L(-1)); however, the mechanisms of sorption varied according to the characteristics of each material: degree of decomposition, pH, cation exchange capacity and percentage of organic matter. Vermicompost and manure removed 98% of the Pb from solution. Lead precipitated in manure and vermicompost, forming lead oxide (PbO) and lead ferrite (PbFe4O7). Adsorption isotherms did not fit to the typical Freundlich and Langmuir equations. Not only specific and non-specific adsorption was observed, but also precipitation and coprecipitation. Lead desorption from vermicompost and cow manure was less than 2%. For remediation of Pb-polluted sites, the application of vermicompost and manure is recommended in places with alkaline soils because Pb precipitation can be induced, whereas coffee pulp residue is recommended for acidic soils where Pb is adsorbed.

  1. Morphing of geometric composites via residual swelling.

    Science.gov (United States)

    Pezzulla, Matteo; Shillig, Steven A; Nardinocchi, Paola; Holmes, Douglas P

    2015-08-07

    Understanding and controlling the shape of thin, soft objects has been the focus of significant research efforts among physicists, biologists, and engineers in the last decade. These studies aim to utilize advanced materials in novel, adaptive ways such as fabricating smart actuators or mimicking living tissues. Here, we present the controlled growth-like morphing of 2D sheets into 3D shapes by preparing geometric composite structures that deform by residual swelling. The morphing of these geometric composites is dictated by both swelling and geometry, with diffusion controlling the swelling-induced actuation, and geometric confinement dictating the structure's deformed shape. Building on a simple mechanical analog, we present an analytical model that quantitatively describes how the Gaussian and mean curvatures of a thin disk are affected by the interplay among geometry, mechanics, and swelling. This model is in excellent agreement with our experiments and numerics. We show that the dynamics of residual swelling is dictated by a competition between two characteristic diffusive length scales governed by geometry. Our results provide the first 2D analog of Timoshenko's classical formula for the thermal bending of bimetallic beams - our generalization explains how the Gaussian curvature of a 2D geometric composite is affected by geometry and elasticity. The understanding conferred by these results suggests that the controlled shaping of geometric composites may provide a simple complement to traditional manufacturing techniques.

  2. Manual for implementing residual radioactivity guidelines

    International Nuclear Information System (INIS)

    Gilbert, T.L.; Eckerman, K.F.; Hansen, W.R.; Healy, J.W.; Kennedy, W.E.; Napier, B.A.; Solday, J.K.

    1986-01-01

    The US Department of Energy (DOE) has recently issued guidelines for residual radioactivity at Formerly Utilized Sites Remedial Action Program (FUSRAP) and remote Surplus Facilities Management Program (SFMP) sites. A manual for implementing these guidelines has been prepared jointly by four DOE laboratories (ANL, LANL, ORNL, and PNL) and is being issued as a supplement to the guidelines. The manual presents procedures and tables for deriving site-specific guidelines for levels of residual radionuclide concentrations in soil that must not be exceeded if a site is to be released for unrestricted use. Guidance for implementing DOE ALARA policy for remedial actions is also included. The concentration factor method is used in the pathway analysis for deriving soil guidelines. The analysis has been structured in a manner that explicitly identifies all of the factors involved. Tables are provided for dose-conversion factors and pathway factors from which environmental transport factors for each radionuclide and pathway may be calculated. The scenarios used for deriving the environmental transport factors and dose conversion factors, and the manner in which the information provided in the manual is used to derive site-specific soil guidelines will be presented

  3. Low-residue euthanasia of stranded mysticetes.

    Science.gov (United States)

    Harms, Craig A; McLellan, William A; Moore, Michael J; Barco, Susan G; Clarke, Elsburgh O; Thayer, Victoria G; Rowles, Teresa K

    2014-01-01

    Euthanasia of stranded large whales poses logistic, safety, pharmaceutical, delivery, public relations, and disposal challenges. Reasonable arguments may be made for allowing a stranded whale to expire naturally. However, slow cardiovascular collapse from gravitational effects outside of neutral buoyancy, often combined with severely debilitating conditions, motivate humane efforts to end the animal's suffering. The size of the animal and prevailing environmental conditions often pose safety concerns for stranding personnel, which take priority over other considerations. When considering chemical euthanasia, the size of the animal also necessitates large quantities of euthanasia agents. Drug residues are a concern for relay toxicity to scavengers, particularly for pentobarbital-containing euthanasia solutions. Pentobarbital is also an environmental concern because of its stability and long persistence in aquatic environments. We describe a euthanasia technique for stranded mysticetes using readily available, relatively inexpensive, preanesthetic and anesthetic drugs (midazolam, acepromazine, xylazine) followed by saturated KCl delivered via custom-made needles and a low-cost, basic, pressurized canister. This method provides effective euthanasia while moderating personnel exposure to hazardous situations and minimizing drug residues of concern for relay toxicity.

  4. Residual CO2 trapping in Indiana limestone.

    Science.gov (United States)

    El-Maghraby, Rehab M; Blunt, Martin J

    2013-01-02

    We performed core flooding experiments on Indiana limestone using the porous plate method to measure the amount of trapped CO(2) at a temperature of 50 °C and two pressures: 4.2 and 9 MPa. Brine was mixed with CO(2) for equilibration, then the mixture was circulated through a sacrificial core. Porosity and permeability tests conducted before and after 884 h of continuous core flooding confirmed negligible dissolution. A trapping curve for supercritical (sc)CO(2) in Indiana showing the relationship between the initial and residual CO(2) saturations was measured and compared with that of gaseous CO(2). The results were also compared with scCO(2) trapping in Berea sandstone at the same conditions. A scCO(2) residual trapping end point of 23.7% was observed, indicating slightly less trapping of scCO(2) in Indiana carbonates than in Berea sandstone. There is less trapping for gaseous CO(2) (end point of 18.8%). The system appears to be more water-wet under scCO(2) conditions, which is different from the trend observed in Berea; we hypothesize that this is due to the greater concentration of Ca(2+) in brine at higher pressure. Our work indicates that capillary trapping could contribute to the immobilization of CO(2) in carbonate aquifers.

  5. Residual stress characterization of steel TIG welds by neutron diffraction and by residual magnetic stray field mappings

    Science.gov (United States)

    Stegemann, Robert; Cabeza, Sandra; Lyamkin, Viktor; Bruno, Giovanni; Pittner, Andreas; Wimpory, Robert; Boin, Mirko; Kreutzbruck, Marc

    2017-03-01

    The residual stress distribution of tungsten inert gas welded S235JRC+C plates was determined by means of neutron diffraction (ND). Large longitudinal residual stresses with maxima around 600 MPa were found. With these results as reference, the evaluation of residual stress with high spatial resolution GMR (giant magneto resistance) sensors was discussed. The experiments performed indicate a correlation between changes in residual stresses (ND) and the normal component of local residual magnetic stray fields (GMR). Spatial variations in the magnetic field strength perpendicular to the welds are in the order of the magnetic field of the earth.

  6. comparative assessment residual soils in residual soils in parts of e

    African Journals Online (AJOL)

    eobe

    residual soil formed from Zuma rock. The Zuma r is an igneous .... The liquid limit (LL) is the lowest water content above which soil .... where this effect begins to be counteracted by the saturation of the ... retaining walls, tunnel linings and timbering of excavation. .... event of pore pressure build up due to excessive moisture.

  7. Crop residue decomposition, residual soil organic matter and nitrogen mineralization in arable soils with contrasting textures

    NARCIS (Netherlands)

    Matus, F.J.

    1994-01-01

    To evaluate the significance of cropping, soil texture and soil structure for the decomposition of 14C- and 15N-labelled crop residues, a study was conducted in a sand and a

  8. Minimal residual disease in chronic lymphocytic leukaemia.

    Science.gov (United States)

    García Vela, José Antonio; García Marco, José Antonio

    2018-02-23

    Minimal residual disease (MRD) assessment is an important endpoint in the treatment of chronic lymphocytic leukaemia (CLL). It is highly predictive of prolonged progression-free survival (PFS) and overall survival and could be considered a surrogate for PFS in the context of chemoimmunotherapy based treatment. Evaluation of MRD level by flow cytometry or molecular techniques in the era of the new BCR and Bcl-2 targeted inhibitors could identify the most cost-effective and durable treatment sequencing. A therapeutic approach guided by the level of MRD might also determine which patients would benefit from an early stop or consolidation therapy. In this review, we discuss the different MRD methods of analysis, which source of tumour samples must be analysed, the future role of the detection of circulating tumour DNA, and the potential role of MRD negativity in clinical practice in the modern era of CLL therapy. Copyright © 2017 Elsevier España, S.L.U. All rights reserved.

  9. Residual heat removal during accidental situations

    International Nuclear Information System (INIS)

    Depond, M.; Sureau, H.; Tellier, N.

    1983-07-01

    Existing emergency procedures, whose purpose is residual heat removal and a safe recovery are based on sequential analysis and initiating event diagnosis. This approach was found in some cases inappropriate and inefficient, specially in case of out-of-design accidents corresponding to multiple equipment failure or simultaneous human failures. To cope with these situations, a new approach was necessary. Parallel studies performed in France at Framatome (the designer) and Electricity de France (the utility) gave a new method, called NSSS physical states approach. Prior to the implementation of this method which necessitates further studies and developments, some improvements in the existing operating procedures derived from the NSSS physical states have already been achieved: that is the case for the safety injection control and the development of an emergency procedure called ''U1''. This paper will briefly physical states approach and present the ''U1'' procedure. The tools which will be used to chack these methods are also mentioned

  10. [14C]Virginiamycin residues in eggs

    International Nuclear Information System (INIS)

    Corpet, D.E.; Baradat, M.; Bories, G.F.

    1988-01-01

    Laying hens were fed ab libitum a diet supplemented at 40, 10, and 0 mg/kg with [ 14 C]virginiamycin, to determine whether or not virginamycin or its metabolites were transferred to the eggs. About 0.05% of the ingested 14 C dose was recovered in the eggs. Radiolabeled residues expressed in terms of virginiamycin equivalents were found to be 5.1 ng/g in the albumen and 31.8 ng/g in the yolk from hens fed a 10 mg/kg diet. No antibiotic activity could be detected in the eggs. Tentative identifications showed that in the albumen about 17% of the 14 C behaved chromatographically like virginiamycin and 18% was associated to the ovalbumin. In the yolk 31% of the 14 C was associated to proteins, 58% to fatty acids, and 4% to unsaponifiable matter

  11. Gasification characteristics of auto shredder residue

    International Nuclear Information System (INIS)

    Navee, S.; Ramzan, N.

    2011-01-01

    Given the large volume of used tyre waste generated each year it is imperative that suitable re-use and disposal techniques are developed for dealing with this problem; presently these include rethreading, reprocessing for use as safe playground and sports surfaces, use as noise reduction barriers and utilisation as a fuel source. This paper reports on pilot scale studies designed to investigate the suitability of automotive waste for energy recovery via gasification. The study was carried out into auto shredder residue, which is a mixture of three distinct waste streams: tyres, rubber/plastic and general automotive waste. The tests included proximate, ultimate and elemental analysis, TGA, as well as calorific value determinations. In addition, the waste was tested in a desktop gasifier, and analysis was carried out to determine the presence and type of combustible gases. It was concluded that tyre waste and rubber/plastic waste are quite suitable fuels for gasification. (author)

  12. Embrittling effects of residual elements on steels

    International Nuclear Information System (INIS)

    Brear, J.M.; King, B.L.

    1979-01-01

    In a review of work related to reheat cracking in nuclear pressure vessel steels, Dhooge et al referred to work of the authors on the relative embrittling parameter for SA533B steels. The poor agreement when these parameters were applied to creep ductility data for SA508 class 2 lead the reviewers to conclude that the relative importance of impurity elements is a function of base alloy composition. The authors briefly describe some of their more recent work which demonstrates that when various mechanical, and other, effects are taken into consideration, the relative effects of the principal residual elements are similar, despite differing base compositions, and that the embrittling parameters derived correlate well with the data for SA Class 2 steel. (U.K.)

  13. Instructive of chemical residues waste administration

    International Nuclear Information System (INIS)

    Alfaro Vargas, Ariel

    2014-01-01

    An instructive is established for the waste management system of chemical residues generated at the Universidad de Costa Rica, ensuring the collection, separation, transportation, reuse, recycling and final disposal. The laboratory waste management system is conditioned to the volume and type of waste generated. The respective procedures are listed in data sheets according to the corresponding model: avoid, reduce, recycle, treat, delete. The materials are identified as: expired products, materials or damaged products, substances that have lost some of the required characteristics, waste from the regular activities of the lab, unused products that now no longer used because they are considered inadequate. The chemicals reagents or hazardous are transformed into small amounts of derivatives safe products, or less hazardous, to allow for removal or to pick up a spill of these without problem [es

  14. Residual heat removal system diagnostic advisor

    International Nuclear Information System (INIS)

    Tripp, L.

    1991-01-01

    This paper reports on the Residual Heat Removal System (RHRS) Diagnostic Advisor which is an expert system designed to alert the operators to abnormal conditions that exits in the RHRS and offer advice about the cause of the abnormal conditions. The Advisor uses a combination of rule-based and model-based diagnostic techniques to perform its functions. This diagnostic approach leads to a deeper understanding of the RHRS by the Advisor and consequently makes it more robust to unexpected conditions. The main window of the interactive graphic display is a schematic diagram of the RHRS piping system. When a conclusion about a failed component can be reached, the operator can bring up windows that describe the failure mode of the component and a brief explanation about how the Advisor arrived at its conclusion

  15. Residual impairment after lower extremity fracture

    DEFF Research Database (Denmark)

    Faergemann, C; Frandsen, P A; Röck, N D

    1998-01-01

    In a prospective follow-up study of 158 consecutive patients 18 to 64 years old with unilateral lower extremity fracture, our aim was to disclose the impairment and disability 6 months after the injury. The patients were interviewed within 1 week after the trauma, and all patients returned...... the functional status before the injury. Additionally, three major aspects of impairments were measured 6 months after the fractures: range of motion, muscle strength, and pain. Most patients had a significantly higher SIP score 6 months after the fracture(s) than pretraumatically. The mean overall SIP score...... was 2.7 pretraumatically and 8.7 6 months posttraumatically. Major deficits in range of motion was observed, especially in the ankle joint. Additionally, loss of muscle strength was observed in the thigh and calf muscles in one fourth of the patients. Only low levels of residual pain were reported after...

  16. CAREM-25: Residual heat removal system

    International Nuclear Information System (INIS)

    Arvia, Roberto P.; Coppari, Norberto R.; Gomez de Soler, Susana M.; Ramilo, Lucia B.

    2000-01-01

    The objective of this work was the definition and consolidation of the residual heat removal system for the CAREM 25 reactor. The function of this system is cool down the primary circuit, removing the core decay heat from hot stand-by to cold shutdown and during refueling. In addition, this system heats the primary water from the cold shutdown condition to hot stand-by condition during the reactor start up previous to criticality. The system has been designed according to the requirements of the standards: ANSI/ANS 51.1 'Nuclear safety criteria for the design of stationary PWR plants'; ANSI/ANS 58.11 'Design criteria for safe shutdown following selected design basis events in light water reactors' and ANSI/ANS 58.9 'Single failure criteria for light water reactor safety-related fluid systems'. The suggested design fulfills the required functions and design criteria standards. (author)

  17. Minimal residual method stronger than polynomial preconditioning

    Energy Technology Data Exchange (ETDEWEB)

    Faber, V.; Joubert, W.; Knill, E. [Los Alamos National Lab., NM (United States)] [and others

    1994-12-31

    Two popular methods for solving symmetric and nonsymmetric systems of equations are the minimal residual method, implemented by algorithms such as GMRES, and polynomial preconditioning methods. In this study results are given on the convergence rates of these methods for various classes of matrices. It is shown that for some matrices, such as normal matrices, the convergence rates for GMRES and for the optimal polynomial preconditioning are the same, and for other matrices such as the upper triangular Toeplitz matrices, it is at least assured that if one method converges then the other must converge. On the other hand, it is shown that matrices exist for which restarted GMRES always converges but any polynomial preconditioning of corresponding degree makes no progress toward the solution for some initial error. The implications of these results for these and other iterative methods are discussed.

  18. Persistence of pirimiphos methyl residues in stored wheat

    International Nuclear Information System (INIS)

    Zennouche, B.; Bennaceur, M.

    1991-03-01

    The persistence of 14C pirimiphos methyl in stored wheat was investigated under local conditions during a storage period of 6 months. Surface, methanol extractable and bound residues were quantified. There was a gradual increase in the surface residues over the storage period. 27,97% of the applied amount was found in the surface residues and 54,16% in the extractable and bound residues one month after treatment. After 6 months storage, about 17,8% of the total quantity of the applied pirimiphos methyl remained on the surface and about 58,6% was present in the grains (extractable and bound residues). During cooking 10,91% of the extractable and bound residues were lost

  19. Parametrization of the. delta. residue function. [Complex functions

    Energy Technology Data Exchange (ETDEWEB)

    Vasan, S S [Carnegie-Mellon Univ., Pittsburgh, Pa. (USA). Dept. of Physics

    1976-04-19

    The complex residues at the ..delta..(1236) and ..delta..(1950) poles in the relevant partial-wave amplitudes provide information on the behaviour of the ..delta.. Regge residue function in the resonance region u>0. Attempts to incorporate this information in parametrizations of the residue by functions that are real on the real u-axis result in residues which have unsatisfactory behaviour in the region u<1GeV/sup 2/. The choice of complex functions for the trajectory and residue removes this undesirable feature and provides a better representation of the residue in the resonance region, suggesting that complex parametrizations would be better suited to Regge analyses of near-backward scattering.

  20. Residual entanglement and sudden death: A direct connection

    International Nuclear Information System (INIS)

    Oliveira, J.G.G. de; Peixoto de Faria, J.G.; Nemes, M.C.

    2011-01-01

    We explore the results of [V. Coffman, et al., Phys. Rev. A 61 (2000) 052306] derived for general tripartite states in a dynamical context. We study a class of physically motivated tripartite systems. We show that whenever entanglement sudden death occurs in one of the partitions residual entanglement will appear. For fourpartite systems however, the appearance of residual entanglement is not conditioned by sudden death of entanglement. We can only say that if sudden death of entanglement occurs in some partition there will certainly be residual entanglement. -- Highlights: ► For tripartite systems we show there exists residual entanglement if sudden death occurs. ► For fourpartite systems, the residual entanglement is not conditioned by sudden death. ► If sudden death of entanglement occurs there will certainly be residual entanglement.

  1. On root class residuality of HNN-extensions

    International Nuclear Information System (INIS)

    Tieudjo, D.

    2004-08-01

    A sufficient condition or root-class residuality of HNN-extensions with root-class residual base group is proven; namely if G = -1 1Ht = K, φ> is the HNN-extension with base group A, stable letter t and associated subgroups H and K via the isomorphism φ, then G is root-class residual if group A is root-class residual and there exists a homomorphism σ of group G onto some group of a root-class such that σ is one-to-one on H. For the particular case when H = K and σ is the identical map, it is shown that G is root-class residual if and only if A is root-class residual and subgroup H of A is root-class separable. These results are generalized to multiple HNN-extensions. (author)

  2. DNA quantification of basidiomycetous fungi during storage of logging residues

    Directory of Open Access Journals (Sweden)

    Isabella Børja

    2015-04-01

    Full Text Available The demand for bioenergy caused an increased use of logging residues, branches and treetops that were previously left on the ground after harvesting. Residues are stored outdoors in piles and it is unclear to what extent fungi transform this material. Our objective was to quantify the amount of wood degrading fungi during storage using quantitative real-time PCR (qPCR to detect basidiomycetous DNA in logging residues, a novel approach in this field. We found that the qPCR method was accurate in quantifying the fungal DNA during storage. As the moisture content of the piled logging residues decreased during the storage period, the fungal DNA content also decreased. Scots pine residues contained more fungal DNA than residues from Norway spruce. Loose piles had generally more fungal DNA than bundled ones.

  3. The method for measuring residual stress in stainless steel pipes

    International Nuclear Information System (INIS)

    Shimov, Georgy; Rozenbaum, Mikhail; Serebryakov, Alexandr; Serebryakov, Andrey

    2016-01-01

    The main reason of appearance and growth of corrosion damages of the nuclear steam generator heat exchanger tubes is the process of stress-corrosion cracking of metal under the influence of residual tensile stress. Methods used in the production for estimating residual stresses (such as a method of ring samples) allow measuring only the average tangential stress of the pipe wall. The method of ring samples does not allow to assess the level of residual stress in the surface layer of the pipe. This paper describes an experimental method for measuring the residual stresses on the pipe surface by etching a thin surface layer of the metal. The construction and working principle of a trial installation are described. The residual stresses in the wall of the tubes 16 × 1.5 mm (steel AISI 321) for nuclear steam generators is calculated. Keywords: heat exchange pipes, stress corrosion cracking, residual stresses, stress distribution, stress measurement.

  4. Design of specimen for weld residual stress simulation

    International Nuclear Information System (INIS)

    Kim, Jin Weon; Park, Jong Sun; Lee, Kyung Soo

    2008-01-01

    The objective of this study is to design a laboratory specimen for simulating residual stress of circumferential butt welding of pipe. Specimen type and method for residual stress generation were proposed based on the review of prior studies and parametric finite element simulation. To prove the proposed specimen type and loading method, the residual stress was generated using the designed specimen by applying proposed method and was measured. The measured residual stress using X-ray diffraction reasonably agreed with the results of finite element simulation considered in the specimen design. Comparison of residual strains measured at several locations of specimen and given by finite element simulation also showed good agreement. Therefore, it is indicated that the designed specimen can reasonably simulate the residual stress of circumferential butt welding of pipe

  5. Tyrosine residues modification studied by MALDI-TOF mass spectrometry

    International Nuclear Information System (INIS)

    Santrucek, Jiri; Strohalm, Martin; Kadlcik, Vojtech; Hynek, Radovan; Kodicek, Milan

    2004-01-01

    Amino acid residue-specific reactivity in proteins is of great current interest in structural biology as it provides information about solvent accessibility and reactivity of the residue and, consequently, about protein structure and possible interactions. In the work presented tyrosine residues of three model proteins with known spatial structure are modified with two tyrosine-specific reagents: tetranitromethane and iodine. Modified proteins were specifically digested by proteases and the mass of resulting peptide fragments was determined using matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry. Our results show that there are only small differences in the extent of tyrosine residues modification by tetranitromethane and iodine. However, data dealing with accessibility of reactive residues obtained by chemical modifications are not completely identical with those obtained by nuclear magnetic resonance and X-ray crystallography. These interesting discrepancies can be caused by local molecular dynamics and/or by specific chemical structure of the residues surrounding

  6. Chemoselective synthesis of functional homocysteine residues in polypeptides and peptides

    OpenAIRE

    Gharakhanian, EG; Deming, TJ

    2016-01-01

    A methodology was developed for efficient, chemoselective transformation of methionine residues into stable, functional homocysteine derivatives. Methionine residues can undergo highly chemoselective alkylation reactions at low pH to yield stable sulfonium ions, which could then be selectively demethylated to give stable alkyl homocysteine residues. This mild, two-step process is chemoselective, efficient, tolerates many functional groups, and provides a means for creation of new functional b...

  7. Gold processing residue from Jacobina Basin: chemical and physical properties

    OpenAIRE

    Lima, Luiz Rogério Pinho de Andrade; Bernardez, Letícia Alonso; Barbosa, Luís Alberto Dantas

    2007-01-01

    p. 848-852 Gold processing residues or tailings are found in several areas in the Itapicuru River region (Bahia, Brazil), and previous studies indicated significant heavy metals content in the river sediments. The present work focused on an artisanal gold processing residue found in a site from this region. Samples were taken from the processing residue heaps and used to perform a physical and chemical characterization study using X-ray diffraction, scanning electron microscopy, neutron...

  8. Acid transformation of bauxite residue: Conversion of its alkaline characteristics

    OpenAIRE

    Kong, X.; Li, M.; Xue, S.; Hartley, W.; Chen, C.; Wu, C.; Li, X.; Li, Y.

    2016-01-01

    Bauxite residue (BR) is a highly alkaline solid hazardous waste produced from bauxite processing for alumina production. Alkaline transformation appears to reduce the environmental risk of bauxite residue disposal areas (BRDAs) whilst potentially providing opportunities for the sustainable reuse and on-going management of BR. Mineral acids, a novel citric acid and a hybrid combination of acid-gypsum treatments were investigated for their potential to reduce residue pH and total alkalinity and...

  9. Crop residue decomposition in Minnesota biochar amended plots

    OpenAIRE

    S. L. Weyers; K. A. Spokas

    2014-01-01

    Impacts of biochar application at laboratory scales are routinely studied, but impacts of biochar application on decomposition of crop residues at field scales have not been widely addressed. The priming or hindrance of crop residue decomposition could have a cascading impact on soil processes, particularly those influencing nutrient availability. Our objectives were to evaluate biochar effects on field decomposition of crop residue, using plots that were amended with ...

  10. Unburned carbon in combustion residues from mainly solid biofuels

    Energy Technology Data Exchange (ETDEWEB)

    Bjurstroem H; Lind B; Lagerkvist A

    2012-02-15

    Unburned carbon in 21 combustion residues from solid biofuels is investigated using several methods of analysis (a.o. LOI and TOC), as well as micro-Raman spectroscopy. The results are used to discuss the distribution of unburned carbon in the residues from the different combustion plants and its nature (organic or elemental). The consequences of the elemental nature of carbon for environmental properties of the residue are noted

  11. Western Canadian wood residue production and consumption trends

    International Nuclear Information System (INIS)

    McCloy, B.

    2006-01-01

    This presentation considered various trends in western Canadian wood residue production and consumption. Potential markets for wood residue products were also discussed. Trends were reviewed by province for the years 2000-2004. British Columbia (BC) is currently the largest producer of residue in the country, and also retains the largest surpluses of bark, sawdust and shavings. Wood residues in BC are used in pulp and plywood mill production, as well as in the creation of particleboard and MDF. Surplus mill wood residue production in the province has greatly increased due to the Mountain Pine Beetle (MPB) infestation, which has in turn spurred expansion of the BC interior sawmill industry. The infestation has also resulted in a glut of pulp chips. Current wood residue products in Alberta are mostly used in pulp mill combined heat and power (CHP) systems, as well as for wood pellet production and the creation of particleboard and MDF. It was noted that surplus residues are rapidly declining in the province. Saskatchewan's wood residue storage piles are estimated to contain 2,900,000 BDt, while Manitoba surpluses are relatively minor. It was suggested that high natural gas prices have increased the payback on wood energy systems to approximately 2 years. The value of wood residue is now greater than $100/BDt as a substitute for natural gas once the wood energy system has been fully depreciated. Sawmills may now wish to consider equipping themselves to sell wood residue products, as most sawmills only require 20 per cent of their residues for heating purposes. It was concluded that markets for hog fuel wood pellets should be developed in Canada and internationally. Future markets may also develop if natural gas currently used in pulp mill power boilers and lime kilns is replaced with wood residue energy systems. refs., tabs., figs

  12. Longitudinal Analysis of Residual Feed Intake in Mink using Random Regression with Heterogeneous Residual Variance

    DEFF Research Database (Denmark)

    Shirali, Mahmoud; Nielsen, Vivi Hunnicke; Møller, Steen Henrik

    Heritability of residual feed intake (RFI) increased from low to high over the growing period in male and female mink. The lowest heritability for RFI (male: 0.04 ± 0.01 standard deviation (SD); female: 0.05 ± 0.01 SD) was in early and the highest heritability (male: 0.33 ± 0.02; female: 0.34 ± 0.......02 SD) was achieved at the late growth stages. The genetic correlation between different growth stages for RFI showed a high association (0.91 to 0.98) between early and late growing periods. However, phenotypic correlations were lower from 0.29 to 0.50. The residual variances were substantially higher...

  13. Water dynamics clue to key residues in protein folding

    International Nuclear Information System (INIS)

    Gao, Meng; Zhu, Huaiqiu; Yao, Xin-Qiu; She, Zhen-Su

    2010-01-01

    A computational method independent of experimental protein structure information is proposed to recognize key residues in protein folding, from the study of hydration water dynamics. Based on all-atom molecular dynamics simulation, two key residues are recognized with distinct water dynamical behavior in a folding process of the Trp-cage protein. The identified key residues are shown to play an essential role in both 3D structure and hydrophobic-induced collapse. With observations on hydration water dynamics around key residues, a dynamical pathway of folding can be interpreted.

  14. Peptides containing internal residues of pyroglutamic acid: proton NMR characteristics

    International Nuclear Information System (INIS)

    Khan, S.A.

    1986-01-01

    The proton NMR characteristics of internal pyroglutamic acid (Glp; 5-oxoproline) residues in seven tripeptides of the general structure Boc-Xxx-Glp-Yyy-NH 2 were studied. In general, the chemical shifts of several diagnostic protons moved downfield on going from the Glu-containing peptides (Boc-Xxx-Glu-Yyy-NH 2 ) to the corresponding Glp-containing peptides. The C-2 proton of the Xxx residue was shifted by about 1.1 ppm. The N-2 proton of the Yyy residue was shifted by about 0.5 ppm. The C-2 proton of the Glx residue itself was shifted by about 0.5 ppm. One of the Glx C-3 protons was also shifted by about 0.5 ppm, but the other remained essentially unchanged. Finally, the Glx C-4 protons were shifted by about 0.3 ppm. Internal Glu residues are readily converted chemically into internal Glp residues. This conversion also occurs as a side reaction during HP cleavage of the protecting group from Glu(OBzl) residues. The spontaneous fragmentation of serum proteins C3, C4 and λ 2 -macroglobulin under denaturing conditions is probably due to regioselective hydrolysis of an internal Glp residue formed in each of these proteins upon denaturation. These proton NMR characteristics may be useful in establishing the presence of internal Glp residues in synthetic and natural peptides

  15. Energetics of coal substitution by briquettes of agricultural residues

    Energy Technology Data Exchange (ETDEWEB)

    Purohit, Pallav; Tripathi, Arun Kumar; Kandpal, Tara Chandra [Centre for Energy Studies, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110016 (India)

    2006-07-15

    The suitability of using biomass briquettes to substitute coal is debatable, as a substantial amount of energy is required for briquetting of biomass. In the present work, an attempt to evaluate the energetic viability of briquetting of agricultural residues compared with the energy embodied in coal in India has been made. Briquetting of agricultural residues is not found to be an energetically viable option even for locations at a distance of about 1500km from the coal pithead (even if the briquetting unit is located very close to the place of availability of the agricultural residues). A need for transportation of agricultural residues further pushes this critical distance upwards. (author)

  16. Logging and Agricultural Residue Supply Curves for the Pacific Northwest

    Energy Technology Data Exchange (ETDEWEB)

    Kerstetter, James D.; Lyons, John Kim

    2001-01-01

    This report quantified the volume of logging residues at the county level for current timber harvests. The cost of recovering logging residues was determined for skidding, yearding, loading, chipping and transporting the residues. Supply curves were developed for ten candidate conversion sites in the Pacific Northwest Region. Agricultural field residues were also quantified at the county level using five-year average crop yields. Agronomic constraints were applied to arrive at the volumes available for energy use. Collection costs and transportation costs were determined and supply curves generated for thirteen candidate conversion sites.

  17. Optimization of heat-liberating batches for ash residue stabilization

    International Nuclear Information System (INIS)

    Karlina, O.K.; Varlackova, G.A.; Ojovan, M.I.; Tivansky, V.M.; Dmitriev, S.A.

    1999-01-01

    The ash residue obtained after incineration of solid radioactive waste is a dusting poly-dispersed powder like material that contains radioactive nuclides ( 137 Cs, 90 Sr, 239 Pu, hor ( ellipsis)). Specific radioactivity of the ash can be about 10 5 --10 7 Bq/kg. In order to dispose of the ash, residue shall be stabilized by producing a monolith material. The ash residue can be either vitrified or stabilized into a ceramic matrix. For this purpose the ash residue is mixed with fluxing agents followed by melting of obtained composition in the different type melters. As a rule this requires both significant energy consumption and complex melting equipment. A stabilization technology of ash residue was proposed recently by using heat liberating batches-compositions with redox properties. The ash residue is melted due to exothermic chemical reactions in the mixture with heat-liberating batch that occur with considerable release of heat. Stabilization method has three stages: (1) preparation of a mixture of heating batch and ash residue with or without glass forming batch (frit); (2) ignition and combustion of mixed composition; (3) cooling (quenching) of obtained vitreous material. Combustion of mixed composition occurs in the form of propagation of reacting wave. The heat released during exothermic chemical reactions provides melting of ash residue components and production of glass-like phase. The final product consists of a glass like matrix with embedded crystalline inclusions of infusible ash residue components

  18. Predicting the residual life of plant equipment - Why worry

    International Nuclear Information System (INIS)

    Jaske, C.E.

    1985-01-01

    Predicting the residual life of plant equipment that has been in service for 20 to 30 years or more is a major concern of many industries. This paper reviews the reasons for increased concern for residual-life assessment and the general procedures used in performing such assessments. Some examples and case histories illustrating procedures for assessing remaining service life are discussed. Areas where developments are needed to improve the technology for remaining-life estimation are pointed out. Then, some of the critical issues involved in residual-life assessment are identified. Finally, the future role of residual-life prediction is addressed

  19. Evaluation of Residual Stresses using Ring Core Method

    Directory of Open Access Journals (Sweden)

    Holý S.

    2010-06-01

    Full Text Available The method for measuring residual stresses using ring-core method is described. Basic relations are given for residual stress measurement along the specimen depth and simplified method is described for average residual stress estimation in the drilled layer for known principal stress directions. The estimation of calculated coefficients using FEM is described. Comparison of method sensitivity is made with hole-drilling method. The device for method application is described and an example of experiment is introduced. The accuracy of method is discussed. The influence of strain gauge rosette misalignment to the evaluated residual stresses is performed using FEM.

  20. Residual stresses in weld-clad reactor pressure vessel steel

    International Nuclear Information System (INIS)

    Bertram, W.

    1975-01-01

    Cladding of low alloy nuclear reactor pressure vessel steel with austenitic stainless steel introduces in heavy section components high residual stresses which may cause microcrack formation in stress relief heat treatment. In this investigation an attempt is made to contribute to the solution of the stress relief cracking problem by determining quantitatively the magnitude and distribution of the residual stresses after cladding and after subsequent stress relief heat treatment. The distribution of residual stresses was determined on the basis of a combined experimental-mathematical procedure. Heavy section plate specimens of low alloy steel as base material were given an austenitic monolayer-cladding using the techniques of strip electrode and plasma hot wire cladding, respectively. A number of plates was stress relief heat treated. Starting from the cladded surface the thickness of the plates was reduced by subsequent removal of layers of material. The elastic strain reaction to the removal of each layer was measured by strain gauges. From the data obtained the biaxial residual stress distribution was computed as a function of thickness using relations which are derived for this particular case. In summary, lower residual stresses are caused by reduced thickness of the components. As the heat input, is decreased at identical base material thickness, the residual stresses are lowered also. The height of the tensile residual stress peak, however, remains approximataly constant. In stress relief annealed condition the residual stresses in the cladding are in tension; in the base material the residual stresses are negligibly small

  1. Residual stress measurement in 304 stainless steel weld overlay pipes

    International Nuclear Information System (INIS)

    Yen, H.J.; Lin, M.C.C.; Chen, L.J.

    1996-01-01

    Welding overlay repair (WOR) is commonly employed to rebuild piping systems suffering from intergranular stress corrosion cracking (IGSCC). To understand the effects of this repair, it is necessary to investigate the distribution of residual stresses in the welding pipe. The overlay welding technique must induce compressive residual stress at the inner surface of the welded pipe to prevent IGSCC. To understand the bulk residual stress distribution, the stress profile as a function of location within wall is examined. In this study the full destructive residual stress measurement technique -- a cutting and sectioning method -- is used to determine the residual stress distribution. The sample is type 304 stainless steel weld overlay pipe with an outside diameter of 267 mm. A pipe segment is cut from the circular pipe; then a thin layer is removed axially from the inner to the outer surfaces until further sectioning is impractical. The total residual stress is calculated by adding the stress relieved by cutting the section away to the stress relieved by axially sectioning. The axial and hoop residual stresses are compressive at the inner surface of the weld overlay pipe. Compressive stress exists not only at the surface but is also distributed over most of the pipe's cross section. On the one hand, the maximum compressive hoop residual stress appears at the pipe's inner surface. The thermal-mechanical induced crack closure from significant compressive residual stress is discussed. This crack closure can thus prevent IGSCC very effectively

  2. Alkaline pretreatment of Mexican pine residues for bioethanol ...

    African Journals Online (AJOL)

    Alkaline pretreatment of Mexican pine residues for bioethanol production. ... Keywords: Lignocellulosic biomass, alkaline pretreatment, enzymatic hydrolysis, fermentable sugars, fermentation. African Journal of Biotechnology Vol. 12(31), pp.

  3. Analytical and Experimental Study of Residual Stresses in CFRP

    Directory of Open Access Journals (Sweden)

    Chia-Chin Chiang

    2013-01-01

    Full Text Available Fiber Bragg Grating sensors (FBGs have been utilized in various engineering and photoelectric fields because of their good environment tolerance. In this research, residual stresses of carbon fiber reinforced polymer composites (CFRP were studied using both experimental and analytical approach. The FBGs were embedded inside middle layers of CFRP to study the formation of residual stress during curing process. Finite element analysis was performed using ABAQUS software to simulate the CFRP curing process. Both experimental and simulation results showed that the residual stress appeared during cooling process and the residual stresses could be released when the CFRP was machined to a different shape.

  4. By how much can Residual Minimization Accelerate the Convergence of Orthogonal Residual Methods?

    Czech Academy of Sciences Publication Activity Database

    Gutknecht, M. H.; Rozložník, Miroslav

    2001-01-01

    Roč. 27, - (2001), s. 189-213 ISSN 1017-1398 R&D Projects: GA ČR GA201/98/P108 Institutional research plan: AV0Z1030915 Keywords : system of linear algebraic equations * iterative method * Krylov space method * conjugate gradient method * biconjugate gradient method * CG * CGNE * CGNR * CGS * FOM * GMRes * QMR * TFQMR * residual smoothing * MR smoothing * QMR smoothing Subject RIV: BA - General Mathematics Impact factor: 0.438, year: 2001

  5. Studies on image quality, high contrast resolution and dose for the axial skeleton and limbs with a new, dedicated CT system (ISO-C-3D); Untersuchungen zur Bildqualitaet, Hochkontrastaufloesung und Dosis am Stamm- und Gliedmassenskelett mit einem neuen dedizierten CT-System (ISO-C-3D)

    Energy Technology Data Exchange (ETDEWEB)

    Rock, C.; Kotsianos, D.; Linsenmaier, U. [Klinikum der Universitaet Muenchen, Muenchen (Germany). Inst. fuer Klinische Radiologie; Fischer, T. [Klinikum der Universitaet Muenchen, Muenchen (DE). Inst. fuer Klinische Radiologie] (and others)

    2002-02-01

    verwertbare Bildqualitaet; Score 4: hervorragende Bildqualitaet). Zusaetzlich erfolgten Dosismessungen und Hochkontraststudien an einem adaptierten Hochkontrastphantom (Catphan, Phantom Laboratories) im Vergleich zur Niedrigdosis- und Standarddosis-CT. Ergebinsse: Die Untersuchungen kleinerer Gelenke wie Hand-, Sprung-, Ellbogen- und Kniegelenk lieferten eine diagnostische Bildqualitaet (Scoremittelwerte 3-4) bei einer applizierten Dosis im Bereich der einer Niedrigdosis-CT. Dagegen war die Bildqualitaet der Hueftgelenks- und Wirbelsaeulenuntersuchungen trotz Dosiserhoehung um 85% eingeschraenkt (Scorewerte 2-3) und die der Schultergelenksuntersuchungen von schlechter Qualitaet (Score 1). Die Bilddaten der Hochkontraststudien zeigten in der xy-Achse eine der CT vergleichbare Hochkontrastaufloesung (9 LP/cm). Schlussfolgerung: Die vorlaeufigen Ergebnisse zeigen, dass die Bildqualitaet der ISO-C-3D-Untersuchungen von peripheren Gelenken von diagnostischer Qualitaet ist. Am Hueftgelenk und am Stammskelett ist die Bildqualitaet nicht adaequat und erscheint bisher nicht ausreichend zur Frakturdiagnostik. (orig.)

  6. Method of producing pitch (distillation residue)

    Energy Technology Data Exchange (ETDEWEB)

    Stepanenko, M.A.; Belkina, T.V.; Krysin, V.P.

    1979-08-15

    A method is proposed for producing pitch by mixing hard coal pitch with anthracene fraction and thermal treatment of the mixture. The method is distinguished in that in order to increase the quality of the pitch, the anthracene fraction is subjected to thermal treatment at 250-300/sup 0/ for 10-13 hours in the presence of air. This duration of heat treatment allows one to build up in the anthracene fraction up to 20-24% of material which is not soluble and toluene, without the formation of products which are not soluble in quinoline. The fraction prepared in this manner is inserted into the initial pitch in the ratio 1:2 up to 1:9, the mixture is subject to heat treatment at temperature 360-380/sup 0/ and air consumption 7-91/kgX hours until the production of pitch with softening temperature of 85-90/sup 0/. As the initial raw material we used pitch with softening temperature of 60/sup 0/, content of substances which are not soluble in quinoline, 2.0% which are not soluble and toluene 20.6% and coking residue of 49.2%. Example. 80 grams of anthracene fraction is added to 320 grams of pitch. The anthracene fraction is subjected previously to heat treatment at 300/sup 0/ for 13 hours in the presence of air, supplied in the amount of 9 liters per hour. As a result of the heat treatment of the content of materials which are not soluble in toluence in the anthracene fraction is 24.0%, in quinoline it is 0.1%. The ratio of a pitch and thermally treated anthracene fraction in the mixture was 4:l. The produced mixture was subjected to heat treatment at 360/sup 0/ for 1.5 hours with air supply in the amount of 7 liters/ kilograms/hours. Pitch is produced with the following characteristics: softening temperature 88/sup 0/, content of substances which are not soluble in toluene 32.5%, in quinilone, 6.0%, coking residue, 56.7%. The invention can be used in the chemical coking and petrochemical industry.

  7. RESRAD, Residual Radioactive Material Guideline Implementation

    International Nuclear Information System (INIS)

    1998-01-01

    This code system is designed to calculate site-specific residual radioactive material guidelines, and radiation dose and excess cancer risk to an on-site resident (maximally exposed individual). A guideline is a radionuclide concentration or level of radioactivity that is acceptable if a site is to be used without radiological restrictions. Guidelines are expressed as concentrations of residual radionuclides in soil. Soil is unconsolidated earth material, including rubble and debris that may be present. The guidelines are based on the following principles: (1) the total effective dose equivalent should not exceed 100 mrem/yr for all plausible land uses and 30 mrem/yr for current and likely future land uses and (2) doses should be kept as low as reasonably achievable (ALARA). Nine environmental pathways are considered: direct exposure, inhalation of dust and radon, and ingestion of plant foods, meat, milk, aquatic foods, soil, and water. CCC-0552/04: A - Description of program or function: RESRAD-BUILD Version 2.36 is a pathway analysis model designed to evaluate the potential radiological dose incurred by an individual who works or lives in a building contaminated with radioactive material. The radioactive material in the building structure can be released into the indoor air by mechanisms such as diffusion (radon gas), mechanical removal (decontamination activities), or erosion (removable surface contamination). In the June 1998 update, RESRAD was updated to Version 5.82 and RESRAD-BUILD was updated to version 2.36. The following notes highlight new features: RESRAD5.82 (4/30/98): - Allow plot data to be exported to tab-delimited text file - Corrected Installation problem to Windows 3.1 - Corrected plotting problem for soil guidelines RESRAD-BUILD2.36 (4/9/98): - Corrected problem with simultaneously changing number of wall regions and their parameters - Added OK button to uncertainty window - Made sure first uncertainty variable in added on first try See the

  8. Experimental investigations for provision of a data basis for optimization of active surge control. Final report; Experimentelle Untersuchungen zur Bereitstellung einer Datenbasis fuer die Optimierung der aktiven Stabilitaetsverbesserung. Teilverbund-Projekt: Aktive Stabilitaetsverbesserung - Analyseverfahren der Arbeitsgemeinschaft AG Turbo II. Abschlussbericht zum Vorhaben 1.1.4

    Energy Technology Data Exchange (ETDEWEB)

    Seume, J.; Reissner, A.

    2001-07-01

    Presently axial compressors have to run with considerable distance to operation points of high load although usually the best efficiencies can be obtained there. In those areas there is high danger of surge which brings high damaging potential to the compressor. The prediction time to surge presently is very short (<<1s) and depends on the load and rotor rotation of the compressor. The goal of this project is the production of a data basis to investigate stall inception (which is the precursor of surge) and to develop and test better precursory warning algorithms. An extensive set of data as well in stable as in unstable operating points in different load areas was developed which now is ready for use in research, verification and for comparison of forewarning systems. (orig.) [German] Zur Zeit ist es notwendig, Axialverdichter mit deutlichem Abstand von den hoch belasteten Betriebspunkten zu betreiben, obwohl haeufig dort die besten Wirkungsgrade zu erzielen waeren. In diesen Bereichen kann es leicht zu sog. Pumpen kommen, wodurch der Verdichter einem extremen Schaedigungspotential ausgesetzt ist. Die Vorwarnzeiten fuer das Pumpen sind bisher noch sehr kurz. Sie liegen in einem Bereich von deutlich weniger als einer Sekunde (abhaengig von der Belastung und der Drehzahl des Verdichters). Ziel dieser Untersuchungen ist es, eine Datenbasis zu liefern, anhand derer die Entstehungsmechanismen untersucht und moeglichst fruehzeitige Vorwarnalgorithmen entwickelt bzw. erprobt werden koennen. Es wurde eine umfangreiche Datenbasis sowohl an verschiedenen stabilen als auch instabilen Betriebspunkten in unterschiedlichen Lastbereichen erstellt, die nun zur Entwicklung, zur Verifizierung und zum Vergleich von Fruehwarnsystemen zur Verfuegung steht. (orig.)

  9. Determination of Pesticides Residues in Cucumbers Grown in Greenhouse and the Effect of Some Procedures on Their Residues.

    Science.gov (United States)

    Leili, Mostafa; Pirmoghani, Amin; Samadi, Mohammad Taghi; Shokoohi, Reza; Roshanaei, Ghodratollah; Poormohammadi, Ali

    2016-11-01

    The objective of this study was to determine the residual concentrations of ethion and imidacloprid in cucumbers grown in greenhouse. The effect of some simple processing procedures on both ethion and imidacloprid residues were also studied. Ten active greenhouses that produce cucumber were randomly selected. Ethion and imidacloprid as the most widely used pesticides were measured in cucumber samples of studied greenhouses. Moreover, the effect of storing, washing, and peeling as simple processing procedures on both ethion and imidacloprid residues were investigated. One hour after pesticide application; the maximum residue levels (MRLs) of ethion and imidacloprid were higher than that of Codex standard level. One day after pesticide application, the levels of pesticides were decreased about 35 and 31% for ethion and imidacloprid, respectively, which still were higher than the MRL. Washing procedure led to about 51 and 42.5% loss in ethion and imidacloprid residues, respectively. Peeling procedure also led to highest loss of 93.4 and 63.7% in ethion and imidacloprid residues, respectively. The recovery for both target analytes was in the range between 88 and 102%. The residue values in collected samples one hour after pesticides application were higher than standard value. The storing, washing, and peeling procedures lead to the decrease of pesticide residues in greenhouse cucumbers. Among them, the peeling procedure has the greatest impact on residual reduction. Therefore, these procedures can be used as simple and effective processing techniques for reducing and removing pesticides from greenhouse products before their consumption.

  10. Bioethanol production from rice straw residues

    Directory of Open Access Journals (Sweden)

    Elsayed B. Belal

    2013-01-01

    Full Text Available A rice straw -cellulose utilizing mold was isolated from rotted rice straw residues. The efficient rice straw degrading microorganism was identified as Trichoderma reesei. The results showed that different carbon sources in liquid culture such as rice straw, carboxymethyl cellulose, filter paper, sugar cane bagasse, cotton stalk and banana stalk induced T. reesei cellulase production whereas glucose or Potato Dextrose repressed the synthesis of cellulase. T. reesei cellulase was produced by the solid state culture on rice straw medium. The optimal pH and temperature for T. reesei cellulase production were 6 and 25 ºC, respectively. Rice straw exhibited different susceptibilities towards cellulase to their conversion to reducing sugars. The present study showed also that, the general trend of rice straw bioconversion with cellulase was more than the general trend by T. reesei. This enzyme effectively led to enzymatic conversion of acid, alkali and ultrasonic pretreated cellulose from rice straw into glucose, followed by fermentation into ethanol. The combined method of acid pretreatment with ultrasound and subsequent enzyme treatment resulted the highest conversion of lignocellulose in rice straw to sugar and consequently, highest ethanol concentration after 7 days fermentation with S. cerevisae yeast. The ethanol yield in this study was about 10 and 11 g.L-1.

  11. Detecting chlorinated hydrocarbon residues: Rachel Carson's villains.

    Science.gov (United States)

    Travis, Anthony S

    2012-07-01

    In 1962, Rachel Carson's Silent Spring drew the public's attention to the deleterious effects of chlorinated hydrocarbons employed as economic poisons in agriculture. However, she did not discuss how their residues could be routinely identified and quantified. In part, this was because the introduction of instruments for use in environmental analysis had only just begun, and she was probably unaware of their existence. The development of the instrumental methods began in industry, particularly at Dow and Shell, in the mid-1950s. Dow scientists, by combining mass spectrometry with gas chromatography, developed the most powerful technique, then and now, for the separation, quantitation and identification of chlorinated hydrocarbons. Shell scientists were no less innovative, particularly with the application of highly sensitive gas chromatography detectors to trace analysis. The first of these detectors, the electron capture detector, was invented by James Lovelock at the National Institute of Medical Research, North London, at the end of the 1950s. Around the same time, Dale Coulson in the USA developed his microcoulometric detector.

  12. Residual energy applications program systems analysis report

    Energy Technology Data Exchange (ETDEWEB)

    Yngve, P.W.

    1980-10-01

    Current DOE plans call for building an Energy Applied Systems Test (EAST) Facility at the Savannah River Plant in close proximity to the 140 to 150/sup 0/F waste heat from one of several operating nuclear reactors. The waste water flow from each reactor, approximately 165,000 gpm, provides a unique opportunity to test the performance and operating characteristics of large-scale waste heat power generation and heat pump system concepts. This report provides a preliminary description of the potential end-use market, parametric data on heat pump and the power generation system technology, a preliminary listing of EAST Facility requirements, and an example of an integrated industrial park utilizing the technology to maximize economic pay back. The parametric heat pump analysis concluded that dual-fluid Rankine cycle heat pumps with capacities as high as 400 x 10/sup 6/ Btu/h, can utilize large sources of low temperature residual heat to provide 300/sup 0/F saturatd steam for an industrial park. The before tax return on investment for this concept is 36.2%. The analysis also concluded that smaller modular heat pumps could fulfill the same objective while sacrificing only a moderate rate of return. The parametric power generation analysis concluded that multi-pressure Rankine cycle systems not only are superior to single pressure systems, but can also be developed for large systems (approx. = 17 MW/sub e/). This same technology is applicable to smaller systems at the sacrifice of higher investment per unit output.

  13. Determination of pesticide residues in cereal grains

    International Nuclear Information System (INIS)

    Fuzesi, I.; Susan, M.

    2005-01-01

    The applicability of the TLC for determination of pesticide residues in cereal grains was studied using corn, rice and wheat as representative commodities and atrazine, captan, chlorpyrifos, chlortoluron, diazinon, diuron, fenitrothion, metoxuron, prochloraz, triforine as representative compounds. Following the extraction with ethyl acetate the efficiency of extraction was tested with Bio-Rad SX-3 gel, GPC, silica gel, florisil and RP-18 reverse phase silica cartridge. The GPC alone or in combination with silica or florisil cleanup were the most suitable for cleanup of the extracts. The TLC elution characteristics of 131 pesticide active ingredients were tested with eight elution systems. The detectability of the selected compounds was determined with six detection methods including two chemical and four bioassay procedures. In addition to the basic methods, the non-toxic Penicillium cyclopium fungi spore inhibition was introduced and it was found very sensitive for some fungicide compounds. The minimum detectable quantities of the tested compounds ranged from 1 ng to 100 ng. The average recoveries from rice and wheat ranged from 78% to 89%, and the limits of quantitation, LOQ, were between 0.01 and 0.2 mg/kg for the selected ten compounds. (author)

  14. Power generation from residual industrial heat

    International Nuclear Information System (INIS)

    Nguyen, T.Q.; Slawnwhite, J.D.; Boulama, K.Goni

    2010-01-01

    Industrial plants continuously reject large amounts of thermal energy through warm liquid or gaseous effluents during normal operation. These energy losses contribute to an inflation of production costs and also threaten the environment. This paper investigates methods of recovering the residual low grade thermal energy and converting it into higher quality mechanical energy using the thermodynamic Rankine cycle principle. For the temperature range of the available thermal energy, water was shown to be a poor working fluid for the conversion system, thus several potential working fluids, including ammonia, synthetic refrigerants, and organic compounds have been considered as alternatives. A comparative analysis led to the identification of different performance evaluation criteria. For example, the water-based Rankine cycle and, to a lesser extent, the ammonia-based Rankine cycle proved to be interesting when the power generation potential per unit working fluid mass flow rate was considered. On the other hand, Rankine-like cycles using dry hydrocarbon working fluids proved much more interesting in terms of energy conversion efficiency, as well as in terms of the net mechanical power generation potential for a given heat source. All performance indicators were low at low temperatures, and improved as the primary heat source was available at higher temperatures. This paper also discusses the influence of various external and internal operating parameters, such as heat source and heat sink temperatures, turbine and pump isentropic efficiencies and the addition of an internal heat exchanger on the overall performance of the energy recovery and conversion system.

  15. Thermal residual stresses in amorphous thermoplastic polymers

    Science.gov (United States)

    Grassia, Luigi; D'Amore, Alberto

    2010-06-01

    An attempt to calculate the internal stresses in a cylindrically shaped polycarbonate (LEXAN-GE) component, subjected to an arbitrary cooling rate, will be described. The differential volume relaxation arising as a result of the different thermal history suffered by each body point was considered as the primary source of stresses build up [1-3]. A numerical routine was developed accounting for the simultaneous stress and structural relaxation processes and implemented within an Ansys® environment. The volume relaxation kinetics was modeled by coupling the KAHR (Kovacs, Aklonis, Hutchinson, Ramos) phenomenological theory [4] with the linear viscoelastic theory [5-7]. The numerical algorithm translates the specific volume theoretical predictions at each body point as applied non-mechanical loads acting on the component. The viscoelastic functions were obtained from two simple experimental data, namely the linear viscoelastic response in shear and the PVT (pressure volume temperature) behavior. The dimensionless bulk compliance was extracted from PVT data since it coincides with the memory function appearing in the KAHR phenomenological theory [7]. It is showed that the residual stress scales linearly with the logarithm of the Biot's number.

  16. Residual heat removal pump retrofit program

    International Nuclear Information System (INIS)

    Dudiak, J.G.; McKenna, J.M.

    1990-01-01

    Residual Heat Removal (RHR) pumps installed in pressurized water reactor power plants are used to provide the removal of decay heat from the reactor and to provide low head safety injection in the event of loss of coolant in the reactor coolant system. These pumps are subjected to rather severe temperature and pressure transients, therefore, the majority of pumps installed in the RHR service are vertical pumps with a single stage impeller. RHR pumps have traditionally been a significant maintenance item for many utilities. The close-coupled pump design requires disassembly of the casing cover from the lower pump casing while performing these routine maintenance tasks. The casing separation requires the loosening of numerous highly torqued studs. Once the casing is separated, the impeller is dropped from the motor shaft to allow removal of the mechanical seal and casing cover from the motor shaft. Galling of the impeller to the motor shaft is not uncommon. The RHR pump internals are radioactive and the separation of the pump casing to perform routine maintenance exposes the maintenance personnel to high radiation levels. The handling of the impeller also exposes the maintenance personnel to high radiation levels. This paper introduces a design modification developed to convert the close-coupled RHR pumps to a coupled configuration

  17. Investigation of te development of the optimal process of fermentation of grass silage by means of a two-stage process; Untersuchungen zur Entwicklung eines optimalen Verfahrens der Vergaerung von Grassilage durch zweiphasige Prozessfuehrung

    Energy Technology Data Exchange (ETDEWEB)

    Zielonka, S.; Lemmer, A.; Oechsner, H.; Jungbluth, T. [Hohenheim Univ., Stuttgart (Germany). Landesanstalt fuer Landwirtschaftliches Maschinen- und Bauwesen, Baden-Wuerttemberg

    2007-07-01

    At present, mainly biogas plants with liquid manure as basis substrate are operated in the Federal Republic of Germany. Since the introduction of the Renewable Energy Resources Act in the year 2004, regenerating raw materials dominate as co-substrate beside organic residual substances. In the context of the composite material ''Biogas Crops network '', the mono fermentation is examined of grass silage in a two-phase procedure guidance using bioleaching. Thus the turnover rate of the energy stored in the organic mass is to be increased to methane. The focus of the investigations lies on the improvement of the hydrolysis achievement. Despite the high methane formation in the hydrolysis stage, in the thermophilic hydrolysis the highest degree of degradation of oTS and the highest yields of methane are received in the overall system.

  18. Development of an NPP residual lifetime evaluation system

    International Nuclear Information System (INIS)

    Regano, M.; Ibanez, M.; Hevia, F.

    1993-01-01

    Various reasons have given rise to the need for residual life management of Spain's nuclear power plants which lead to the a project for the development of a residual lifetime evaluation system managed by UNESA and supported by the owner groups. This project is described. 1 fig

  19. finite element model for predicting residual stresses in shielded

    African Journals Online (AJOL)

    eobe

    This paper investigates the prediction of residual stresses developed ... steel plates through Finite Element Model simulation and experiments. ... The experimental values as measured by the X-Ray diffractometer were of ... Based on this, it can be concluded that Finite Element .... Comparison of Residual Stresses from X.

  20. Corn residue utilization by livestock in the USA

    Science.gov (United States)

    Corn (Zea mays L.) residue grazing or harvest provides a simple and economical practice to integrate crops and livestock. Limited information is available on how widespread corn residue utilization is practiced by US producers. In 2010, the USDA-ERS surveyed producers from 19 states on corn grain ...

  1. 40 CFR 180.473 - Glufosinate ammonium; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Glufosinate ammonium; tolerances for... § 180.473 Glufosinate ammonium; tolerances for residues. (a) General. Tolerances are established for residues of the herbicide glufosinate-ammonium (butanoic acid, 2-amino-4-(hydroxymethylphosphinyl...

  2. Biofertilizer potential of residual biomass of Akk (alotropis procera (Ait.))

    International Nuclear Information System (INIS)

    Ahmad, N.

    2016-01-01

    The biofertilizer potential of residual biomass, derived from two parts that is flowers and leaves of Akk,was investigated in terms of its applications as a substrate for phyto-beneficial bacterial growth and subsequent inorganic phosphate solubilizing agent. The residual biomass was obtained after the extraction of antioxidants from the leaves and flowers of Akk using different solvent systems. The treatment with residual biomass of Akk (RBA) significantly (p<0.05) enhanced the growth of Enterobacter sp. Fs-11 and Rhizobium sp. E-11 as compared to control (without residual biomass). Maximum microbial growth in terms of optical density (0.92-1.22) was observed for residual biomass sample extracted with aqueous acetone against the control (0.58-0.68). On the other hand, maximum phosphate solubilization (589.27-611.32 mu g mL-1) was recorded for aqueous ethanol extracted residual biomass while the minimum (246.31-382.15 micro g) for aqueous acetone extracted residual biomass against the control (576.65 micro g mL-1). The present study revealed that the tested RBA can be explored as an effective bio-inoculant to supplement synthetic inorganic phosphate fertilizers. However, some appropriate in-vitro assays should be conducted to optimize and standardize the quantity and mesh size of residual biomass prior to use in biofertilizer production as carrier material. (author)

  3. Crop residues for advanced biofuels workshop: A synposis

    Science.gov (United States)

    Crop residues are being harvested for a variety of purposes including their use as livestock feed and to produce advanced biofuels. Crop residue harvesting, by definition, reduces the potential annual carbon input to the soil from aboveground biomass but does not affect input from plant roots. The m...

  4. A logging residue "yield" table for Appalachian hardwoods

    Science.gov (United States)

    A. Jeff Martin

    1976-01-01

    An equation for predicting logging-residue volume per acre for Appalachian hardwoods was developed from data collected on 20 timber sales in national forests in West Virginia and Virginia. The independent variables of type-of-cut, products removed, basal area per acre, and stand age explained 95 percent of the variation in residue volume per acre. A "yield"...

  5. A first look at logging residue characteristics in West Virginia

    Science.gov (United States)

    A. Jeff Martin

    1975-01-01

    In 1973 and 1974, the Forest Products Marketing Laboratory obtained some preliminary information about characteristics of logging residues in West Virginia. Sixteen 1-acre plots were measured in conjunction with a test of the line-intersect sampling method. Findings from the 16 plots showed that hardwood residue volumes ranged from 100 to 1,300 cubic feet per acre,...

  6. 40 CFR 180.434 - Propiconazole; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ...: Commodity Parts per million Cranberry 1.0 Rice, wild, grain 0.5 (d) Indirect or inadvertent residues... 4.5 Pineapple, process residue 7.0 Pistachio 0.1 Rice, bran 15 Rice, grain 7.0 Rice, hulls 20 Rice...

  7. Finite element concept to derive isostatic residual maps

    Indian Academy of Sciences (India)

    A new space-domain operator based on the shape function concept of finite element analysis has been developed to derive the residual maps of the Gorda Plate of western United States. The technique does not require explicit assumptions on isostatic models. Besides delineating the Gorda Plate boundary, the residual ...

  8. Assessment of pesticide residues in tomatoes and watermelons ...

    African Journals Online (AJOL)

    This study investigated the levels of pesticide residues in selected fruits from major markets in Dar es Salaam city. Samples of tomatoes and watermelons were analysed for eighteen organochlorine, organophosphorus and pyrethroid pesticide residues. Extraction was performed using acetone followed by dichloromethane: ...

  9. Nitrous oxide emission from soils amended with crop residues

    NARCIS (Netherlands)

    Velthof, G.L.; Kuikman, P.J.; Oenema, O.

    2002-01-01

    Crop residues incorporated in soil are a potentially important source of nitrous oxide (N2O), though poorly quantified. Here, we report on the N2O emission from 10 crop residues added to a sandy and a clay soil, both with and without additional nitrate (NO3-). In the sandy soil, total nitrous oxide

  10. 27 CFR 20.104 - Residual alcohol in spirit vinegar.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Residual alcohol in spirit vinegar. 20.104 Section 20.104 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Statements of Process Approval Policies § 20.104 Residual alcohol in spirit vinegar. Commercial strength (40...

  11. Corn Residue Use by Livestock in the United States

    Directory of Open Access Journals (Sweden)

    Marty R. Schmer

    2017-01-01

    Full Text Available Corn ( L. residue grazing or harvest provides a simple and economical practice to integrate crops and livestock, but limited information is available on how widespread corn residue utilization is practiced by US producers. In 2010, the USDA Economic Research Service surveyed producers from 19 states on corn grain and residue management practices. Total corn residue grazed or harvested was 4.87 million ha. Approximately 4.06 million ha was grazed by 11.7 million livestock (primarily cattle in 2010. The majority of grazed corn residue occurred in Nebraska (1.91 million ha, Iowa (385,000 ha, South Dakota (361,000 ha, and Kansas (344,000 ha. Average grazing days ranged from 10 to 73 d (mean = 40 d. Corn residue harvests predominantly occurred in the central and northern Corn Belt, with an estimated 2.9 Tg of corn residue harvested across the 19 states. This survey highlights the importance of corn residue for US livestock, particularly in the western Corn Belt.

  12. Bio-oil from Flash Pyrolysis of Agricultural Residues

    DEFF Research Database (Denmark)

    Ibrahim, Norazana

    This thesis describes the production of bio-oils from flash pyrolysis of agricultural residues, using a pyrolysis centrifugal reactor (PCR). By thermal degradation of agricultural residues in the PCR, a liquid oil, char and non-condensable gases are produced. The yield of each fraction...

  13. 40 CFR 180.176 - Mancozeb; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... Asparagus (negligible residue) 0.1 Banana 4.0 Banana, pulp 0.5 Barley, bran 20 Barley, flour 20 Barley..., straw 25 Onion, bulb 0.5 Papaya (whole fruit with no residue present in the edible pulp after the peel...

  14. Evaluation of Some Pesticide Residues in Stored Beans in Jos ...

    African Journals Online (AJOL)

    Qualitative and quantitative analysis were performed by gas chromatography with electron capture and flame ionization. All the 3 samples (100%) contained pesticide residues beyond the allowed beans maximum residue levels (MRLs) of 0.01 mg/kg and 0.2 mg/kg, respectively, for chlorpyrifos and endosulfan. The present ...

  15. 40 CFR 180.151 - Ethylene oxide; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Ethylene oxide; tolerances for... § 180.151 Ethylene oxide; tolerances for residues. (a) General. (1) Tolerances are established for residues of the antimicrobial agent and insecticide ethylene oxide, when used as a postharvest fumigant in...

  16. 40 CFR 180.464 - Dimethenamid; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances...)-acetamide, applied as either the 90:10 or 50:50 S:R isomers, in or on the following food commodities... Pumpkin 0.01 Squash, winter 0.01 (d) Indirect or inadvertent residues. [Reserved] [65 FR 51551, Aug. 24...

  17. 40 CFR 180.303 - Oxamyl; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.303... methyl N,N-dimethyl-N-hydroxy-1-thiooxamimidate calculated as oxamyl in or on the following food..., nonbell 5.0 Pineapple 1 Pineapple, process residue 2.0 Pumpkin 2.0 Soybean, seed 0.1 Spearmint, tops 10.0...

  18. Interpreting residues of petroleum hydrocarbons in wildlife tissues

    International Nuclear Information System (INIS)

    Hall, R.J.; Coon, N.C.

    1988-08-01

    This report is the first publication in the field of environmental-contaminant effects on wildlife to tell the reader how to interpret the results of analytical chemical results. Specifically, the publication describes how to interpret residues of petroleum hydrocarbons in wildlife tissues. Pollutant oil residues in avian species are emphasized

  19. Simulation of Residual Stresses at Holes in Tempered Glass

    DEFF Research Database (Denmark)

    Nielsen, Jens Henrik; Olesen, John Forbes; Poulsen, Peter Noe

    2010-01-01

    This work presents a full 3D numerical study of the residual stresses in tempered (toughened) glass near holes using Narayanaswamy’s model for the tempering process. It is the objective of the paper to elucidate the influence on the minimal residual compressive stresses at holes from variations in...

  20. Assessment of pesticide residues on selected vegetables of Pakistan

    International Nuclear Information System (INIS)

    Khan, M.S.; Shah, M.M.

    2011-01-01

    The present study was conducted to determine the pesticide residues on selected summer vegetables. Five vegetables were grown with three replicates in a split plot randomized complete block design. Pesticides were sprayed on vegetables thrice at regular intervals each after 15 days. At maturity the pesticides residues were extracted from edible and leaf portions using anhydrous sodium sulfate and ethyl acetate while adsorption chromatography technique was used for cleanup. The extracts were subjected to high performance liquid chromatography (HPLC) for separation and analysis of the compounds. Significant differences (p<0.05) were found in the pesticides residues on edible portions whereas highly significant differences (p<0.001) were observed for the leafy portions. The residual level of cypermethrin was highest (16.2 mg kg/sup -1/) in edible portion of bitter gourd, while Lambdacyhalothrin and Mancozeb residues were detected high (4.50 mg kg/sup -1/, 6.26 mg kg/sup -1/) in edible portion of bitter gourd and Cucumber respectively. Cypermethrin residues were high (1.86 mg kg/sup -1/) in Okra leaves. Mancozeb and Lambdacyhalothrin residual level was high (1.23 mg kg/sup -1/, and 0.0002 mg kg/sup -1/) in chili and tomato leaves. Cypermethrin residues were readily detected in edible and leaf portion of the selected vegetables. (author)

  1. Residues and duality for singularity categories of isolated Gorenstein singularities

    OpenAIRE

    Murfet, Daniel

    2009-01-01

    We study Serre duality in the singularity category of an isolated Gorenstein singularity and find an explicit formula for the duality pairing in terms of generalised fractions and residues. For hypersurfaces we recover the residue formula of the string theorists Kapustin and Li. These results are obtained from an explicit construction of complete injective resolutions of maximal Cohen-Macaulay modules.

  2. Forest residues management guidelines for the Pacific Northwest.

    Science.gov (United States)

    John M. Pierovich; Edward H. Clarke; Stewart G. Pickford; Franklin R. Ward

    1975-01-01

    Forest residues often require treatment to meet land management objectives. Guideline statements for managing forest residues are presented to provide direction for achieving these objectives. The latest research information and the best knowledge of experts in various land management disciplines were used to formulate these statements. A unique keying system is...

  3. Screening of antibiotics residues and development a new kit

    International Nuclear Information System (INIS)

    Elkhaoui, Faycel

    2009-01-01

    The first part of the work was to detect antibiotic residues in animal nutriment: chicken, fish, eggs and milk, by methods of screening: First Test and Delvotest. The second part covered the development of a new kit for the detection of antibiotics residues for honey and competitor kit First Test and saving time and money.

  4. 40 CFR 180.444 - Sulfur dioxide; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... § 180.444 Sulfur dioxide; tolerances for residues. A tolerance is established as follows for sulfite residues of the fungicide sulfur dioxide (determined as (SO2)) in or on the following raw agricultural... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Sulfur dioxide; tolerances for...

  5. Residual Stress Analysis Based on Acoustic and Optical Methods

    Directory of Open Access Journals (Sweden)

    Sanichiro Yoshida

    2016-02-01

    Full Text Available Co-application of acoustoelasticity and optical interferometry to residual stress analysis is discussed. The underlying idea is to combine the advantages of both methods. Acoustoelasticity is capable of evaluating a residual stress absolutely but it is a single point measurement. Optical interferometry is able to measure deformation yielding two-dimensional, full-field data, but it is not suitable for absolute evaluation of residual stresses. By theoretically relating the deformation data to residual stresses, and calibrating it with absolute residual stress evaluated at a reference point, it is possible to measure residual stresses quantitatively, nondestructively and two-dimensionally. The feasibility of the idea has been tested with a butt-jointed dissimilar plate specimen. A steel plate 18.5 mm wide, 50 mm long and 3.37 mm thick is braze-jointed to a cemented carbide plate of the same dimension along the 18.5 mm-side. Acoustoelasticity evaluates the elastic modulus at reference points via acoustic velocity measurement. A tensile load is applied to the specimen at a constant pulling rate in a stress range substantially lower than the yield stress. Optical interferometry measures the resulting acceleration field. Based on the theory of harmonic oscillation, the acceleration field is correlated to compressive and tensile residual stresses qualitatively. The acoustic and optical results show reasonable agreement in the compressive and tensile residual stresses, indicating the feasibility of the idea.

  6. Predictive models of forest logging residues of Triplochiton ...

    African Journals Online (AJOL)

    The model developed indicated that logarithmic functions performed better than other form of equation. The findings of this study revealed that there is significant logging residues left to waste in the forest after timber harvest and quantifying this logging residue in terms of biomass model can serve as management tools in ...

  7. Adsorption Property and Mechanism of Oxytetracycline onto Willow Residues

    Directory of Open Access Journals (Sweden)

    Di Wang

    2017-12-01

    Full Text Available To elucidate the adsorption property and the mechanism of plant residues to reduce oxytetracycline (OTC, the adsorption of OTC onto raw willow roots (WR-R, stems (WS-R, leaves (WL-R, and adsorption onto desugared willow roots (WR-D, stems (WS-D, and leaves (WL-D were investigated. The structural characterization was analyzed by scanning electron microscopy, Fourier-transform infrared spectra, and an elemental analyzer. OTC adsorption onto the different tissues of willow residues was compared and correlated with their structures. The adsorption kinetics of OTC onto willow residues was found to follow the pseudo-first-order model. The isothermal adsorption process of OTC onto the different tissues of willow residues followed the Langmuir and Freundlich model and the process was also a spontaneous endothermic reaction, which was mainly physical adsorption. After the willow residues were desugared, the polarity decreased and the aromaticity increased, which explained why the adsorption amounts of the desugared willow residues were higher than those of the unmodified residues. These observations suggest that the raw and modified willow residues have great potential as adsorbents to remove organic pollutants.

  8. 40 CFR 180.337 - Oxytetracycline; tolerance for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Oxytetracycline; tolerance for... § 180.337 Oxytetracycline; tolerance for residues. Tolerances are established for residues of the pesticide oxytetracycline in or on the following raw agricultural commodities: Commodity Parts per million...

  9. Determination of residual stresses in roll compacted titanium strips

    CSIR Research Space (South Africa)

    Mothosi, KL

    2017-01-01

    Full Text Available residual stresses using x-ray diffraction (XRD) surface probing technique. Preliminary results were obtained for the surface residual stress at the center of the titanium strips for the 100 and 325 mesh strips rolled at 0.1 roll gap for 20 and 50 mm set...

  10. Decomposition of rice residue in tropical soils, 2

    International Nuclear Information System (INIS)

    Yoneyama, Tadakatsu; Yoshida, Tomio

    1977-01-01

    The decomposition processes of intact rice residue (leaf blades) in the Maahas soil in the Philippines were investigated. Three sets of beakers simulating both lowland and upland conditions were incubated in the dark at 30 deg. C. One set of beakers had neither rice residue nor fertilizer. Pieces of leaf blades weighing 204 mg (dry weight) were inserted in the second set. Pieces of leaf blades were inserted in the third set, and 200 ppm of fertilizer nitrogen as 15 N-labelled ammonium sulfate was added. The experiment dealt with the nitrogen immobilization by rice residue under lowland and upland conditions. The rice residue which has contained low nitrogen absorbed nitrogen from the soil and from the added fertilizer (ammonium sulfate) during its decomposition under both conditions. Under the lowland condition, the amount of nitrogen immobilized was small during the first week, but became large after 2 or 3 weeks. Under the upland condition, the immobilized nitrogen reached its maximum during the first week, but the amount was not so large as that under the lowland condition. The added fertilizer stimulated the decrease of weight of the rice residue in the early incubation period, but retarded it later under both conditions. The absorption of fertilizer by the rice residue ceased at the early stage of residue decomposition, but the nitrogen content of the residue continued to increase. (Iwakiri, K.)

  11. Nutritional potential of post extraction residues and silage from ...

    African Journals Online (AJOL)

    Nutritional potential of post extraction residues and silage from leaves of five cassava varieties as feed for ruminants. ... Results indicated that processing reduced (P < 0.05) the inherent nutrients of cassava leaf residues produced after the extraction of protein concentrate from cassava leaves with crude protein (CP) content ...

  12. Research Progress on Furfural Residues Recycling : A Literature Review

    NARCIS (Netherlands)

    Dai, Chun'ai; Liu, Bo; Girisuta, B.; Heeres, H.J.

    2010-01-01

    Millions of tons of furfural residues from the furfural industry are produced every year in China. Proper recycling of these residues is highly desirable as it may reduce associated environmental problems and increase the economic viability of the furfural industry. Research progress on furfural

  13. Residual Wage Differences by Gender: Bounding the Estimates.

    Science.gov (United States)

    Sakellariou, Chris N.; Patrinos, Harry A.

    1996-01-01

    Uses data from the 1986 Canadian labor market activity survey file to derive estimates of residual gender wage gap differences. Investigates these estimates' dependence on experimental design and on assumptions about discrimination-free wage structures. Residual differences persist, even after restricting the sample to a group of highly motivated,…

  14. Isolation of residuals using trend surface analysis to magnetic data ...

    African Journals Online (AJOL)

    Polynomial surfaces of various degrees are fitted to a magnetic data of Awo area, southwestern Nigeria with the aim of isolating the residuals of the area associated with mineralogy. The fourth degree surface correlates better with the magnetic map of the study area. The residualized data were obtained by subtracting the ...

  15. 40 CFR 180.130 - Hydrogen Cyanide; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Hydrogen Cyanide; tolerances for... § 180.130 Hydrogen Cyanide; tolerances for residues. (a) General. A tolerance for residues of the insecticide hydrogen cyanide from postharvest fumigation as a result of application of sodium cyanide is...

  16. X-ray measurement of residual stress on bolt threads

    International Nuclear Information System (INIS)

    Hagiwara, Masaya; Nakahara, Kanefumi; Yoshimoto, Isamu.

    1989-01-01

    This study deals with X-ray measurement of residual stress at the local area around the thread root of a bolt. Residual stress in the 0.5 mm x 5 mm area was measured using a method of stepped scanning and parabolic approximation. The conditions of measurement had been determined and evaluated through the preliminary measurement of compressive stress acting on the cylindrical surface. Furthermore, the fatigue strength estimated by applying the residual stress data to the previously presented hypothesis was compared with the experimental results. The main conclusions obtained were as follows: (1) The residual stress in a relatively small area on the cylindrical surface with large curvature can be measured by X-ray using a method of stepped scanning and parabolic approximation; (2) The compressive residual stress measured at the thread root was larger for the bolt manufactured by thread rolling after heat treatment than for one manufactured by thread rolling before heat treatment; (3) The distribution of residual stress along the axial direction from the thread root to the portion under crest did not represent remarkable change in its value; (4) The residual stress of a bolt was somewhat decreased by fatigue loading on the condition of low mean stress; (5) The fatigue strength estimated using residual stress data showed the tendency of experimental results well. (author)

  17. Electrodialytic remediation of air pollution control residues in bench scale

    DEFF Research Database (Denmark)

    Jensen, Pernille Erland; Ferreira, Celia; Hansen, Henrik K.

    2008-01-01

    Air pollution control (APC) residue from municipal solid waste incineration (MSWI) is considered a hazardous waste due to its alkalinity and high content of salts and mobile heavy metals. Various solutions for the handling of APC-residue exist in different regions; however, most commercial soluti...

  18. Evaluation of pesticide residues in fruits and vegetables from Algeria.

    Science.gov (United States)

    Mebdoua, Samira; Lazali, Mohamed; Ounane, Sidi Mohamed; Tellah, Sihem; Nabi, Fahima; Ounane, Ghania

    2017-06-01

    A total of 160 samples of 13 types of fresh fruits and vegetables from domestic production and import were analysed to detect the presence of pesticide residues. Analysis was performed by multi-residual extraction followed by gas chromatography-mass spectrometry. In 42.5% of the tested samples, no residues were found and 12.5% of samples contained pesticide residues above maximum residue limits. Risk assessment for long-term exposure was done for all pesticides detected in this study. Except chlorpyrifos and lambda-cyhalothrin, exposure to pesticides from vegetables and fruits was below 1% of the acceptable daily intake. Short-term exposure assessment revealed that in seven pesticide/commodity combinations, including three pesticides (chlorpyrifos, deltamethrin and lambda-cyhalothrin), the acute reference dose had been exceeded.

  19. Use of demolition residues construction in soil-lime bricks

    International Nuclear Information System (INIS)

    Figueiredo, S.S.; Silva, C.G.; Silva, I.A.; Neves, G.A.

    2011-01-01

    Besides being responsible for several environmental damage caused by its residues, the construction industry is also considered the greatest natural resources consumer. When finely ground, such residues can exhibit cementing properties, which may replace part of the lime used in the manufacture of soil-lime bricks. This study aimed to verify the viability of using demolition residues (DR) in soil-lime bricks without structural function. For this, test specimens were prepared using mixes in a 1:10 ratio of lime:soil and embedding residue in partial replacement of lime in the proportions of 25%, 50% and 75%. The test specimens were submitted to curing periods of 28 and 52 days, then it was determined the compression strength. The results showed that when embedded on moderate percentages, demolition residues construction can be used in the production of soil-lime bricks. (author)

  20. Swelling kinetics of several residues from Shenhua coal extraction

    Energy Technology Data Exchange (ETDEWEB)

    Cao, Mei-xia; Shui, Heng-fu; Wang, Zhi-cai [Anhui University of Technology, Maanshan (China). School of Chemistry and Chemical Engineering

    2008-08-15

    In order to understand the mechanism of swelling and the relation between swelling behavior and solvent extraction, the swelling kinetics of residues from Shenhua coal extracted by CS{sub 2}/NMP with different mixing ratios were studied in different solvents. The result shows that the swelling rates of extraction residues increase along with swelling temperature. The swelling rate in polar solvent NMP is much higher than that in non-polar solvent THN. Solvent extraction has a great effect on the swelling of extraction residues. The swelling activation energy of extraction residues increases and the swelling rate decreases with the increase of extraction yield. The swelling activation energies of extraction residues in NMP and THN are less than 10 kJ/mol, suggesting that the swelling process is controlled by solvent molecular diffusion in coal structure. 22 refs., 2 figs., 7 tabs.

  1. [Residual pleural thickening in tuberculous pleuritis. Associated factors

    Science.gov (United States)

    Ruiz, E; Alegre, J; Alemán, C; Vizcaya, S; Armadans, L; Segura, R M; Andreu, J; Iglesias, D; Fernández de Sevilla, T

    2000-10-01

    To study the factors related to the development of residual pleural thickening in pleural tuberculosis. We studied 39 patients with tuberculous pleural effusion. A chest X-ray was taken of each patient at the end of treatment. The patients' medical histories, pleural fluid findings and diagnostic chest films were evaluated. Residual pleural thickening was defined as thickening that was visibly greater than 2 mm in the lower side portion of the chest film. Residual pleural thickening developed in 26% of patients and was found mainly in men (RR = 3.86). In no patients with Löwenstein-Jensen cultures positive for Mycobacterium tuberculosis did pleural complications develop. Residual pleural thickening is a common complication of tuberculous pleural effusion. Residual pleural thickening in tuberculous pleurisy occurs more often in men and older patients, and in cases in which pleural liquid culture is negative for M. tuberculosis.

  2. Effect of residual stresses on hydrogen permeation in iron

    International Nuclear Information System (INIS)

    Mouanga, M.; Bercot, P.; Takadoum, J.

    2010-01-01

    The effect of residual stresses on electrochemical permeation in iron membrane was investigated. Four thermal and mechanical treatments were chosen to obtain different surface states in relation to the residual stresses. Residual stresses were determined by X-ray diffraction (XRD) using the Macherauch and Mueller method. The results were completed by the microhardness measurements. For all iron membranes, compressive residual stresses were obtained. Electrochemical permeation experiments using a Devanathan and Stachurski cell were employed to determine the hydrogen permeation behaviour of the various iron membranes. The latter was charged with hydrogen by galvanostatic cathodic polarization in 0.1 M NaOH at 25 deg. C. The experimental results revealed that hydrogen permeation rate increases with increasing residual stresses introduced in iron membranes.

  3. Agrochemical residues in rivers sediments, Poas, Costa Rica

    International Nuclear Information System (INIS)

    Masis, Federico; Valdez, Juan; Leon, Sandra; Coto, Tatiana

    2008-01-01

    The organophosphorus and organochlorine agrochemical residues distribution in sediments of 3 rivers located in an ornamental plant production area were analyzed in Poas canton, Alajuela, Costa Rica. The study comprised 8 months in order to assure 3 seasonal episodes: dry, transitional, and rainy seasons. Sediments were taken in 10 sampling stations along the rivers and characterized by a determination of their organic matter and texture. In 7 out of 10 sampling stations pesticide residues were detected in at least 1 of 4 samplings, but quantified only in 4 stations. Agrochemical residues evaluated included 21 organophosphorus and organochlorine pesticides; however, we found residues of only 3 organochlorine pesticides, due their high persistence in the sediment. Residues corresponded to PCNB (80-800 μg.kg -1 ), Endosulfan-β (40-50 μg.kg -1 ), and Endosulfan-α (90 μg.kg -1 ). Chlorothalonil was detected in only one sample. (author) [es

  4. Residue management in the Bolivia-Brazil gas pipeline construction

    International Nuclear Information System (INIS)

    Freitas, Eduardo Lopes; Henrique, Paulo Roberto Pereira; Cantarino, Anderson Americo Alves

    2000-01-01

    The construction of the gas pipeline is a process sequential of assembly phases, where each one of those phases generates residues of the most varied types and amounts, being necessary the forecast of your generation in agreement with the activity that is being executed. During the accomplishment of the works they are generated a lot of times situations where are observed the inadequate disposition of the residues. Those practices, besides the environmental impact that they cause, it can cart in the future, the need of additional investments be proceeded in the recovery of the areas and removal of the residues. This work presents the Program of administration of Residues instituted during the construction of the pipeline Bolivia - Brazil, seeking, on a side to reduce to the minimum the generation of residues and of the other, moths handling guidelines and disposition, in way to minimize the environmental impacts caused by the same ones. (author)

  5. Obtention of ceramic pigments with residue from electroplating

    International Nuclear Information System (INIS)

    Boss, A.; Kniess, C.T.; Aguiar, B.M. de; Prates, P.B.; Milanez, K.

    2011-01-01

    The incorporation of industrial residues in industrial processes opens up new business opportunities and reduces the volume of extraction of raw materials, preserving natural resources, which are limited. An important residue is the mud from galvanic industry, consisting of alkali and transition metals. According to NBR 10004/2004, this residue can be classified as Class I (hazardous), depending on the concentration of metals present in the mud. This paper proposes a method for reusing the residue from electroplating in ceramic pigments. The characterization of residual plating was obtained by chemical analysis, mineralogical analysis and pH measurements. The electroplating waste was incorporated in different percentages on a standard pigment formula of industrial ceramic, consisting mainly of Zn, Fe and Cr. The obtained pigments were applied in ceramic glazes to colorimetric and visual analysis, which showed good results with the addition of up to 15% of industrial waste. (author)

  6. Characterization of solid residues from coal liquefaction processes. Phase I

    Energy Technology Data Exchange (ETDEWEB)

    Potter, J.; McDougall, W.M.; Kybett, B.D.; Neufeld, C.

    1981-01-01

    Various coal liquefaction and beneficiation processes are being investigated by independent research groups sponsored by the Canadian Federal Government. These processes include the co-processing of heavy oils and bitumen with coal, oxygen removal and hydrogenation of coal and supercritical gas extraction of coal. The end products, gaseous and liquid fuels and insoluble organic residues, vary with the experimental conditions. The physical properties and origin of the insoluble residue may influence such factors as degree of conversion, efficiency of the process, and ultimately, gaseous and liquid yields. One of the most suitable methods of assessing the nature of the insoluble residues is the use of petrography. This report deals with petrographic assessment of the coals and residues from various coal conversion processes; attempts were made to characterize the solid phases in the residues; to assess them in a quantitative manner and where possible; to correlate the results with experimental data; and to assess their effects on conversion. (30 refs.)

  7. [Cognitive performance in schizophrenia (paranoid vs residual subtype)].

    Science.gov (United States)

    Dillon, Carol; Taragano, Fernando; Sarasola, Diego; Iturry, Mónica; Serrano, Cecilia; Raczkowski, Amalia; Allegri, Ricardo

    2007-01-01

    Several studies refer to the relationship between schizophrenia and cognitive dysfunctions. The most frequent disturbances accepted are the deficits in the executive, memory and verbal tests. However, there are few comparative data about the cognitive functioning of the different subtypes of schizophrenia. Analyze and compare the neuropsychological disturbances present in patients with paranoid and residual schizophrenia. Eleven patients with paranoid schizophrenia, eleven patients with residual schizophrenia (DSM-IV criteria), and thirty one normal subjects matched by age, educational level, and general cognitive level (Mini Mental State Examination (Folstein, 1975), were assessed with a semistructured psychiatric examination and an extensive neuropsychological battery. Significant differences were found in memory, language, and executive functions when schizophrenics were compared with normal subjects. Differences in similarities were found between paranoid and residual schizophrenics. Residual schizophrenics had more disturbances in neuropsychological tests in comparison with paranoid schizophrenics. Schizophrenics demonstrated disturbances in memory, language, executive functions and attention. Residual schizophrenics had more impairment in neuropsychological tests than paranoid schizophrenics.

  8. Residual stress in spin-cast polyurethane thin films

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Hong; Zhang, Li, E-mail: lizhang@mae.cuhk.edu.hk [Department of Mechanical and Automation Engineering, The Chinese University of Hong Kong, Shatin N.T., Hong Kong (China); Chow Yuk Ho Technology Centre for Innovative Medicine, The Chinese University of Hong Kong, Shatin N.T., Hong Kong (China)

    2015-01-19

    Residual stress is inevitable during spin-casting. Herein, we report a straightforward method to evaluate the residual stress in as-cast polyurethane thin films using area shrinkage measurement of films in floating state, which shows that the residual stress is independent of radial location on the substrate and decreased with decreasing film thickness below a critical value. We demonstrate that the residual stress is developed due to the solvent evaporation after vitrification during spin-casting and the polymer chains in thin films may undergo vitrification at an increased concentration. The buildup of residual stress in spin-cast polymer films provides an insight into the size effects on the nature of polymer thin films.

  9. Residues of tritium-labeled morantel in lactating dairy cattle

    International Nuclear Information System (INIS)

    Lynch, M.J.; Mosher, F.R.; Burnett, D.M.; Newby, T.J.

    1987-01-01

    Residues of morantel and its metabolites were monitored in plasma, urine, and milk of five lactating dairy cattle that received an oral dose of [4,4-pyrimidyl- 3 H 2 ]morantel tartrate at 10 mg/kg. Drug-related radioactivity peaked in plasma at 8 h and in milk by the second milking, postdose, and was 170 and 84 ng/mL, respectively. The fraction of total residues in milk convertible to the marker compound, N-methyl-1,3-propanediamine, was 0.38 on the basis of a comparison of the areas under the curves for total and marker residues. Five days after dosing, 3.9% of the total radioactivity in liver was recovered as tritium water. Total drug-related residues in this target tissue averaged 1.15 μg/g. About half of the drug-related residues in liver was unextractable and was classified by bound

  10. Acephate and buprofezin residues in olives and olive oil.

    Science.gov (United States)

    Cabras, P; Angioni, A; Garau, V L; Pirisi, F M; Cabitza, F; Pala, M

    2000-10-01

    Field trials were carried out to study the persistence of acephate and buprofezin on olives. Two cultivars, pizz'e carroga and pendolino, with very large and small fruits respectively were used. After treatment, no difference was found between the two pesticide deposits on the olives. The disappearance rates, calculated as pseudo first order kinetics, were similar for both pesticides (on average 12 days). Methamidophos, the acephate metabolite, was always present on all olives, and in some pendolino samples it showed higher residues than the maximum residue limit (MRL). During washing, the first step of olive processing, the residue level of both pesticides on the olives did not decrease. After processing of the olives into oil, no residues of acephate or methamidophos were found in the olive oil, while the residues of buprofezin were on average four times higher than on olives.

  11. Residual stress studies of austenitic and ferritic steels

    International Nuclear Information System (INIS)

    Chrenko, R.M.

    1978-01-01

    Residual studies have been made on austenitic and ferritic steels of the types used as structural materials. The residual stress results presented here will include residual stress measurements in the heat-affected zone on butt welded Type 304 stainless steel pipes, and the stresses induced in Type 304 austenitic stainless steel and Type A508 ferritic steel by several surface preparations. Such surface preparation procedures as machining and grinding can induce large directionality effects in the residual stresses determined by X-ray techniques and some typical data will be presented. A brief description is given of the mobile X-ray residual stress apparatus used to obtain most of the data in these studies. (author)

  12. Ceramic laminates with tailored residual stresses

    Directory of Open Access Journals (Sweden)

    Baudín, C.

    2009-12-01

    Full Text Available Severe environments imposed by new technologies demand new materials with better properties and ensured reliability. The intrinsic brittleness of ceramics has forced scientists to look for new materials and processing routes to improve the mechanical behaviour of ceramics in order to allow their use under severe thermomechanical conditions. The laminate approach has allowed the fabrication of a new family of composite materials with strength and reliability superior to those of monolithic ceramics with microstructures similar to those of the constituent layers. The different ceramic laminates developed since the middle 1970´s can be divided in two large groups depending on whether the development of residual stresses between layers is the main design tool. This paper reviews the developments in the control and tailoring of residual stresses in ceramic laminates. The tailoring of the thickness and location of layers in compression can lead to extremely performing structures in terms of strength values and reliability. External layers in compression lead to the strengthening of the structure. When relatively thin and highly compressed layers are located inside the material, threshold strength, crack bifurcation and crack arrest during fracture occur.

    Las severas condiciones de trabajo de las nuevas aplicaciones tecnológicas exigen el uso de materiales con mejores propiedades y alta fiabilidad. La potencialidad de uso de materiales frágiles, como los cerámicos, en estas aplicaciones exige el desarrollo de nuevos materiales y métodos de procesamiento que mejoren su comportamiento mecánico. El concepto de material laminado ha permitido la fabricación de una nueva familia de materiales con tensiones de fractura y fiabilidad superiores a las de materiales monolíticos con microestructuras similares a las de las láminas que conforman el laminado. Los distintos materiales laminados desarrollados desde mediados de los años 70 se pueden

  13. Impact of Corn Residue Removal on Crop and Soil Productivity

    Science.gov (United States)

    Johnson, J. M.; Wilhelm, W. W.; Hatfield, J. L.; Voorhees, W. B.; Linden, D.

    2003-12-01

    Over-reliance on imported fuels, increasing atmospheric levels of greenhouses and sustaining food production for a growing population are three of the most important problems facing society in the mid-term. The US Department of Energy and private enterprise are developing technology necessary to use high cellulose feedstock, such as crop residues, for ethanol production. Based on production levels, corn (Zea mays L.) residue has potential as a biofuel feedstock. Crop residues are a renewable and domestic fuel source, which can reduce the rate of fossil fuel use (both imported and domestic) and provide an additional farm commodity. Crop residues protect the soil from wind and water erosion, provide inputs to form soil organic matter (a critical component determining soil quality) and play a role in nutrient cycling. Crop residues impact radiation balance and energy fluxes and reduce evaporation. Therefore, the benefits of using crop residues as fuel, which removes crop residues from the field, must be balanced against negative environmental impacts (e.g. soil erosion), maintaining soil organic matter levels, and preserving or enhancing productivity. All ramifications of new management practices and crop uses must be explored and evaluated fully before an industry is established. There are limited numbers of long-term studies with soil and crop responses to residue removal that range from negative to negligible. The range of crop and soil responses to crop residue removal was attributed to interactions with climate, management and soil type. Within limits, corn residue can be harvested for ethanol production to provide a renewable, domestic source of energy feedstock that reduces greenhouse gases. Removal rates must vary based on regional yield, climatic conditions and cultural practices. Agronomists are challenged to develop a protocol (tool) for recommending maximum permissible removal rates that ensure sustained soil productivity.

  14. Turning wood residues into wood revenues

    International Nuclear Information System (INIS)

    Graham, R.G.; Kravetz, Don

    1996-01-01

    Ensyn is a profitable commercial company which derives its revenues from the conversion of wood residues into liquid biofuel and chemicals. The technology, Rapid Thermal Processing (RTP (TM) )is based on extremely fast ''cracking'' of biomass which results in light liquid yields exceeding 70% by weight, from wood. Whether producing chemicals or liquid biofuel, the RTP plant is configured identically and operated essentially in the same mode. Chemicals production simply allows economical production to occur at a lower plant capacity, as low as 2 tonnes/day, than is feasible for a dedicated fuel plant (typically greater than 100 tonnes/day). Ensyn has developed the commercialisation of RTP TM from bench to industrial scale in 10 years. A variety of crative funding initiatives in the early years allowed for capital to be raised for R and D without the loss of intellectual property (IP). The transition years of technology demonstration, prior to full commercialisation, were funded by a blend of revenues from venture capital and public sources, and by quickly tapping into a niche market for RTP TM . The utilisation of the technology at the niche market scale opened the doors to the larger fuel and commodity markets. Once, again, both IP and control of the company were maintained during these years. Flexibility, creativity and expertise are necessary to understand the significance of various financing options (private investments, commercial banking and bond issues) and to integrate these options with various renewable energy, recycling and tax incentives. Understanding these options with various renewable energy, recycling and tax incentives is necessary. Understanding both the core and peripheral needs of the customer are essential in successfully advancing a commercial wood energy venture. Ensyn's experience in these areas is the focus of the paper. (Author)

  15. Residual radiation in Hiroshima and Nagasaki

    Energy Technology Data Exchange (ETDEWEB)

    Arakawa, E T

    1962-02-01

    These results show that the fission product fallout and neutron-induced radioactive isotopes can be separated very conveniently by locations in the city, i.e., the fallout occurred in the Koi-Takasu area of Hiroshima and the Nishiyama area of Nagasaki with negligible fallout in the hypocenter area. The activity in the hypocenter areas of both cities can be accounted for as due principally to neutron induced radioactive isotopes. The maximum exposure from fallout in Hiroshima is considered to have been a few r and in Nagasaki approximately 30 r. From one hour to infinite time after the detonations, the maximum possible neutron induced radiation exposure dose at the hypocenter in Hiroshima is estimated to be in the range from 183 r to 24 r, depending upon the method of calculation. Method III, which yileds 24 r appears to be subject to the least number of uncertainties and thus is the most reliable figure. The excellent agreement between these calculations and the measured activities also further supports the soundness of Method III. This method gives 4 r as the infinity dose at the hypocenter in Nagasaki. These values are considered to be of such loss magnitude as to be of negligible consequence. It should also be emphasized that even for the calculation which yields a maximum dose of 183 r, the probability of an individual being exposed to this dose is very small. These facts suggest that after the detonations in Hiroshima and Nagasaki radiation levels were such that very few individuals, if any, received significant amounts of residual radiation from external sources. 17 references, 4 figures, 3 tables.

  16. Environmental assessment of incinerator residue utilisation.

    Science.gov (United States)

    Toller, S; Kärrman, E; Gustafsson, J P; Magnusson, Y

    2009-07-01

    Incineration ashes may be treated either as a waste to be dumped in landfill, or as a resource that is suitable for re-use. In order to choose the best management scenario, knowledge is needed on the potential environmental impact that may be expected, including not only local, but also regional and global impact. In this study, A life cycle assessment (LCA) based approach was outlined for environmental assessment of incinerator residue utilisation, in which leaching of trace elements as well as other emissions to air and water and the use of resources were regarded as constituting the potential environmental impact from the system studied. Case studies were performed for two selected ash types, bottom ash from municipal solid waste incineration (MSWI) and wood fly ash. The MSWI bottom ash was assumed to be suitable for road construction or as drainage material in landfill, whereas the wood fly ash was assumed to be suitable for road construction or as a nutrient resource to be recycled on forest land after biofuel harvesting. Different types of potential environmental impact predominated in the activities of the system and the use of natural resources and the trace element leaching were identified as being relatively important for the scenarios compared. The scenarios differed in use of resources and energy, whereas there is a potential for trace element leaching regardless of how the material is managed. Utilising MSWI bottom ash in road construction and recycling of wood ash on forest land saved more natural resources and energy than when these materials were managed according to the other scenarios investigated, including dumping in landfill.

  17. Utilization of residues from firing with biofuels

    Energy Technology Data Exchange (ETDEWEB)

    Moberg, P O; Nelson, B; Sjoeberg, A

    1983-10-01

    The aim of the project is to analyse various possibilities of using residues from firing with biofuels, to assess the environmental consequences of such use and to prepare proposal and programme for investigations and tests concerning the use and its environmental consequences. Peat fly ashes have been tested in making concrete with promising results. On the other hand it is doubtful if wood ashes can be used, as the lime content is high. Generally can be said that ashes from biofuels are produced by many small combustion plants and that the quality is unequal. It should be possible to use fly ashes as well as bottom ashes from biofuels as borrow material in road works and construction works. Lime and cement are binders used for stabilization of gravel, sand and clay. Coal fly ashes can partly substitute such binders. Ground stabilization is usual in connection with road construction. It is also probable that fly ashes from biofuels can partly be substituted for cement and lime. Higher prices can be obtained for bio ashes used as binders than used as borrow material. Especially wood ashes are considered to be valuable as forest manure. The value roughly estimated by means of comparison to fertilizer is 400 - 800 SEK/ton. Bottom ashes which are an important part of the total ash production have low contents of heavy metals and are thus perhaps suitable for agricultural use. It seems to be possible to substitute fly ashes from biofuel for part of the precipitation chemicals used for reduction of phosphorus and for sludge conditioning at the local water treatment plants. The estimated Swedish production of wood ashes in 1990 could account for 10 per cent of the present production of potash in Europe. There is a need to cover old tailingponds of rests of sulphide ore with an alkaline and dense material. Locally (Dalecarlia) the good properties of fly ashes for this purpose should be utilized.

  18. Residual stress characterization of steel TIG welds by neutron diffraction and by residual magnetic stray field mappings

    Energy Technology Data Exchange (ETDEWEB)

    Stegemann, Robert, E-mail: Robert.Stegemann@bam.de [Bundesanstalt für Materialforschung und -prüfung (BAM), Unter den Eichen 87, 12200 Berlin (Germany); Cabeza, Sandra; Lyamkin, Viktor; Bruno, Giovanni; Pittner, Andreas [Bundesanstalt für Materialforschung und -prüfung (BAM), Unter den Eichen 87, 12200 Berlin (Germany); Wimpory, Robert; Boin, Mirko [HZB Helmholtz-Zentrum Berlin, Hahn-Meitner-Platz 1, 14109 Berlin (Germany); Kreutzbruck, Marc [Bundesanstalt für Materialforschung und -prüfung (BAM), Unter den Eichen 87, 12200 Berlin (Germany); IKT, University of Stuttgart, Pfaffenwaldring 32, 70569 Stuttgart (Germany)

    2017-03-15

    The residual stress distribution of tungsten inert gas welded S235JRC+C plates was determined by means of neutron diffraction (ND). Large longitudinal residual stresses with maxima around 600 MPa were found. With these results as reference, the evaluation of residual stress with high spatial resolution GMR (giant magneto resistance) sensors was discussed. The experiments performed indicate a correlation between changes in residual stresses (ND) and the normal component of local residual magnetic stray fields (GMR). Spatial variations in the magnetic field strength perpendicular to the welds are in the order of the magnetic field of the earth. - Highlights: • Comparison of magnetic microstructure with neutron diffraction stress analysis. • High spatial resolution magnetic stray field images of hypereutectoid TIG welds. • Spatial variations of the stray fields are below the magnetic field of the earth. • GMR spin valve gradiometer arrays adapted for the evaluation of magnetic microstructures. • Magnetic stray fields are closely linked to microstructure of the material.

  19. Residual symptoms and functioning in depression, does the type of residual symptom matter? A post-hoc analysis

    Directory of Open Access Journals (Sweden)

    Romera Irene

    2013-02-01

    Full Text Available Abstract Background The degrees to which residual symptoms in major depressive disorder (MDD adversely affect patient functioning is not known. This post-hoc analysis explored the association between different residual symptoms and patient functioning. Methods Patients with MDD who responded (≥50% on the 17-item Hamilton Rating Scale for Depression; HAMD-17 after 3 months of treatment (624/930 were included. Residual core mood-symptoms (HAMD-17 core symptom subscale ≥1, residual insomnia-symptoms (HAMD-17 sleep subscale ≥1, residual anxiety-symptoms (HAMD-17-anxiety subscale ≥1, residual somatic-symptoms (HAMD-17 Item 13 ≥1, pain (Visual Analogue Scale ≥30, and functioning were assessed after 3 months treatment. A stepwise logistic regression model with normal functioning (Social and Occupational Functioning Assessment Scale ≥80 as the dependent variable was used. Results After 3 months, 59.5% of patients (371/624 achieved normal functioning and 66.0% (412/624 were in remission. Residual symptom prevalence was: core mood symptoms 72%; insomnia 63%; anxiety 78%; and somatic symptoms 41%. Pain reported in 18%. Factors associated with normal functioning were absence of core mood symptoms (odds ratio [OR] 8.7; 95% confidence interval [CI], 4.6–16.7, absence of insomnia symptoms (OR 1.8; 95% CI, 1.2–2.7, episode length (4–24 weeks vs. ≥24 weeks [OR 2.0; 95% CI, 1.1–3.6] and better baseline functioning (OR 1.0; 95% CI, 1.0–1.1. A significant interaction between residual anxiety symptoms and pain was found (p = 0.0080. Conclusions Different residual symptoms are associated to different degrees with patient functioning. To achieve normal functioning, specific residual symptoms domains might be targeted for treatment.

  20. Multi-Residue Analysis of Pesticide Residues in Crude Pollens by UPLC-MS/MS

    Directory of Open Access Journals (Sweden)

    Zhou Tong

    2016-12-01

    Full Text Available A multi-residue method for the determination of 54 pesticide residues in pollens has been developed and validated. The proposed method was applied to the analysis of 48 crude pollen samples collected from eight provinces of China. The recovery of analytes ranged from 60% to 136% with relative standard deviations (RSDs below 30%. Of the 54 targeted compounds, 19 pesticides were detected. The major detection rates of each compound were 77.1% for carbendazim, 58.3% for fenpropathrin, 56.3% for chlorpyrifos, 50.0% for fluvalinate, 31.3% for chlorbenzuron, and 29.2% for triadimefon in crude pollen samples. The maximum values of each pesticide were 4516 ng/g for carbendazim, 162.8 ng/g for fenpropathrin, 176.6 ng/g for chlorpyrifos, 316.2 ng/g for fluvalinate, 437.2 ng/g for chlorbenzuron, 79.00 ng/g for triadimefon, and so on. This study provides basis for the research on the risks to honeybee health.

  1. Residual stress improving method for reactor structural component and residual stress improving device therefor

    Energy Technology Data Exchange (ETDEWEB)

    Enomoto, Kunio; Otaka, Masahiro; Kurosawa, Koichi; Saito, Hideyo; Tsujimura, Hiroshi; Tamai, Yasukata; Urashiro, Keiichi; Mochizuki, Masato

    1996-09-03

    The present invention is applied to a BWR type reactor, in which a high speed jetting flow incorporating cavities is collided against the surface of reactor structural components to form residual compression stresses on the surface layer of the reactor structural components thereby improving the stresses on the surface. Namely, a water jetting means is inserted into the reactor container filled with reactor water. Purified water is pressurized by a pump and introduced to the water jetting means. The purified water jetted from the water jetting means and entraining cavities is abutted against the surface of the reactor structural components. With such procedures, since the purified water is introduced to the water jetting means by the pump, the pump is free from contamination of radioactive materials. As a result, maintenance and inspection for the pump can be facilitated. Further, since the purified water injection flow entraining cavities is abutted against the surface of the reactor structural components being in contact with reactor water, residual compression stresses are exerted on the surface of the reactor structural components. As a result, occurrence of stress corrosion crackings of reactor structural components is suppressed. (I.S.)

  2. Residual stress improving method for reactor structural component and residual stress improving device therefor

    International Nuclear Information System (INIS)

    Enomoto, Kunio; Otaka, Masahiro; Kurosawa, Koichi; Saito, Hideyo; Tsujimura, Hiroshi; Tamai, Yasukata; Urashiro, Keiichi; Mochizuki, Masato.

    1996-01-01

    The present invention is applied to a BWR type reactor, in which a high speed jetting flow incorporating cavities is collided against the surface of reactor structural components to form residual compression stresses on the surface layer of the reactor structural components thereby improving the stresses on the surface. Namely, a water jetting means is inserted into the reactor container filled with reactor water. Purified water is pressurized by a pump and introduced to the water jetting means. The purified water jetted from the water jetting means and entraining cavities is abutted against the surface of the reactor structural components. With such procedures, since the purified water is introduced to the water jetting means by the pump, the pump is free from contamination of radioactive materials. As a result, maintenance and inspection for the pump can be facilitated. Further, since the purified water injection flow entraining cavities is abutted against the surface of the reactor structural components being in contact with reactor water, residual compression stresses are exerted on the surface of the reactor structural components. As a result, occurrence of stress corrosion crackings of reactor structural components is suppressed. (I.S.)

  3. Residues from waste incineration. Final report. Rev. ed.

    Energy Technology Data Exchange (ETDEWEB)

    Astrup, T.; Juul Pedersen, A.; Hyks, J.; Frandsen, F.J.

    2010-04-15

    The overall objective of the project was to improve the understanding of the formation and characteristics of residues from waste incineration. This was done focusing on the importance of the waste input and the operational conditions of the furnace. Data and results obtained from the project have been discussed in this report according to the following three overall parts: i) mass flows and element distribution, ii) flue gas/particle partitioning and corrosion/deposition aspects, and iii) residue leaching. This has been done with the intent of structuring the discussion while tacitly acknowledging that these aspects are interrelated and cannot be separated. Overall, it was found that the waste input composition had significant impact of the characteristics of the generated residues. A similar correlation between operational conditions and residue characteristics could not be observed. Consequently, the project recommend that optimization of residue quality should focus on controlling the waste input composition. The project results showed that including specific waste materials (and thereby also excluding the same materials) may have significant effects on the residue composition, residue leaching, aerosol and deposit formation.It is specifically recommended to minimize Cl in the input waste. Based on the project results, it was found that a significant potential for optimization of waste incineration exist. (Author)

  4. The potential for energy production from crop residues in Zimbabwe

    Energy Technology Data Exchange (ETDEWEB)

    Jingura, R.M.; Matengaifa, R. [School of Engineering Sciences and Technology, Chinhoyi University of Technology, P. Bag 7724, Chinhoyi (Zimbabwe)

    2008-12-15

    There is increasing interest in Zimbabwe in the use of renewable energy sources as a means of meeting the country's energy requirements. Biomass provides 47% of the gross energy consumption in Zimbabwe. Energy can be derived from various forms of biomass using various available conversion technologies. Crop residues constitute a large part of the biomass available from the country's agriculture-based economy. The potential for energy production of crop residues is examined using data such as estimates of the quantities of the residues and their energy content. The major crops considered are maize, sugarcane, cotton, soyabeans, groundnuts, wheat, sorghum, fruits and forestry plantations. Quantities of residues are estimated from crop yields by using conversion coefficients for the various crops. Long-term crop yields data from 1970 to 1999 were used. Total annual residue yields for crops, fruits and forestry plantations are 7.805 Mt, 378 kt and 3.05 Mt, respectively. The crops, fruits and forestry residues have energy potential of 81.5, 4.9 and 44.3 PJ per year, respectively. This represents about 44% of the gross energy consumption in Zimbabwe. The need to balance use of crop residues for both energy purposes and other purposes such as animal feeding and soil fertility improvement is also highlighted. (author)

  5. Investigation of residual stress in laser welding dissimilar materials

    International Nuclear Information System (INIS)

    Mirim, Denilson de Camargo; Oliveira, Rene Ramos de; Berretta, Jose Roberto; Rossi, Wagner de; Lima, Nelson Batista de; Delijaicov, Sergio; Gomes, Diego Oliva

    2010-01-01

    One of the most critical problems found in the different materials welding is the residual stress formation, that happens mainly for the fact of those materials they possess coefficients of thermal expansion and different thermal conductivities. Like this in this work the residual tension was evaluated in the technique of welding laser among the steel low carbon, AISI 1010 and AISI 304. The materials were united for it welds autogenous of top with a laser of continuous Nd:YAG in that they were varied the potency, speed and the focus of the laser stayed constant in relation to surface of the sample. The main objective of the study went identification and to analysis of the residual stress in HAZ on both sides of seem. Um planning factorial of two factors at two levels each it was executed for optimization the combination of the factors potency and speed. The obtained answers were the residual stress in different depths in HAZ. In the surface of the sample measures of residual stress were accomplished by the technique of X-ray diffraction. The hole drilling strain gage method it was applied to measure the residual stress on both sides of the union. The results were analyzed using the variance analysis and the statistical regression based on the different influences of the entrance and combination of the factors in the residual stress generated in that union. The results indicate that the development of models can foresee the answers satisfactorily. (author)

  6. Residual stress analysis in reactor pressure vessel attachments

    International Nuclear Information System (INIS)

    Dexter, R.J.; Pont, D.

    1991-08-01

    Residual stresses in cladding and welded attachments could contribute to the problem of stress-corrosion cracking in boiling-water reactors (BWR). As part of a larger program aimed at quantifying residual stress in BWR components, models that would be applicable for predicting residual stress in BWR components are reviewed and documented. The review includes simple methods of estimating residual stresses as well as advanced finite-element software. In general, simple methods are capable of predicting peak magnitudes of residual stresses but are incapable of adequately characterizing the distribution of residual stresses. Ten groups of researchers using finite-element software are reviewed in detail. For each group, the assumptions of the model, possible simplifications, material property data, and specific applications are discussed. The most accurate results are obtained when a metallurgical simulation is performed, transformation plasticity effects are included, and the heating and cooling parts of the welding thermal cycle are simulated. Two models are identified which can provide these features. The present state of these models and the material property data available in the literature are adequate to quantify residual stress in BWR components

  7. Chemical modifications of therapeutic proteins induced by residual ethylene oxide.

    Science.gov (United States)

    Chen, Louise; Sloey, Christopher; Zhang, Zhongqi; Bondarenko, Pavel V; Kim, Hyojin; Ren, Da; Kanapuram, Sekhar

    2015-02-01

    Ethylene oxide (EtO) is widely used in sterilization of drug product primary containers and medical devices. The impact of residual EtO on protein therapeutics is of significant interest in the biopharmaceutical industry. The potential for EtO to modify individual amino acids in proteins has been previously reported. However, specific identification of EtO adducts in proteins and the effect of residual EtO on the stability of therapeutic proteins has not been reported to date. This paper describes studies of residual EtO with two therapeutic proteins, a PEGylated form of the recombinant human granulocyte colony-stimulating factor (Peg-GCSF) and recombinant human erythropoietin (EPO) formulated with human serum albumin (HSA). Peg-GCSF was filled in an EtO sterilized delivery device and incubated at accelerated stress conditions. Glu-C peptide mapping and LC-MS analyses revealed residual EtO reacted with Peg-GCSF and resulted in EtO modifications at two methionine residues (Met-127 and Met-138). In addition, tryptic peptide mapping and LC-MS analyses revealed residual EtO in plastic vials reacted with HSA in EPO formulation at Met-328 and Cys-34. This paper details the work conducted to understand the effects of residual EtO on the chemical stability of protein therapeutics. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

  8. Manual of Standard Operating Procedures for Veterinary Drug Residue Analysis

    International Nuclear Information System (INIS)

    2016-01-01

    Laboratories are crucial to national veterinary drug residue monitoring programmes. However, one of the main challenges laboratories encounter is obtaining access to relevant methods of analysis. Thus, in addition to training, providing technical advice and transferring technology, the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture has resolved to develop clear and practical manuals to support Member State laboratories. The Coordinated Research Project (CRP) on Development of Radiometric and Allied Analytical Methods to Strengthen Residue Control Programs for Antibiotic and Anthelmintic Veterinary Drug Residues has developed a number of analytical methods as standard operating procedures (SOPs), which are now compiled here. This publication contains SOPs on chromatographic and spectrometric techniques, as well as radioimmunoassay and associated screening techniques, for various anthelmintic and antimicrobial veterinary drug residue analysis. Some analytical method validation protocols are also included. The publication is primarily aimed at food and environmental safety laboratories involved in testing veterinary drug residues, including under organized national residue monitoring programmes. It is expected to enhance laboratory capacity building and competence through the use of radiometric and complementary tools and techniques. The publication is also relevant for applied research on residues of veterinary drugs in food and environmental samples

  9. Radiation effects on residual voltage of polyethylene films

    International Nuclear Information System (INIS)

    Kyokane, Jun; Park, Dae-Hee; Yoshino, Katsumi.

    1986-01-01

    It has recently been pointed out that diagnosis of deterioration in insulating materials for electric cables used in nuclear power plants and outer space (communications satellite in particular) can be effectively performed based on measurements of residual voltage. In the present study, polyethylene films are irradiated with γ-rays or electron beam to examine the changes in residual voltage characteristics. Irradiation of electron beam and γ-rays are carried out to a dose of 0 - 90 Mrad and 0 - 100 Mrad, respectively. Measurements are made of the dependence of residual voltage on applied voltage, electron beam and γ-ray irradiation, annealing temperature and annealing time. Results show that carriers, which are once trapped after being released from the electrode, move within the material after the opening of the circuit to produce resiual voltage. The residual voltage increases with increasing dose of electron beam or γ-ray and levels off at high dose. Residual voltage is increased about several times by either electron beam or γ-rays, but electron beam tends to cause greater residual voltage than γ-ray. Polyethylene films irradiated with electron beam can recover upon annealing. It is concluded from observations made that residual voltage has close relations with defects in molecular structures caused by radiations, particularly the breaking of backbone chains and alteration in superstructures. (Nogami, K.)

  10. Hydrogen bond strengths in phosphorylated and sulfated amino acid residues.

    Directory of Open Access Journals (Sweden)

    Chaya Rapp

    Full Text Available Post-translational modification by the addition of an oxoanion functional group, usually a phosphate group and less commonly a sulfate group, leads to diverse structural and functional consequences in protein systems. Building upon previous studies of the phosphoserine residue (pSer, we address the distinct nature of hydrogen bonding interactions in phosphotyrosine (pTyr and sulfotyrosine (sTyr residues. We derive partial charges for these modified residues and then study them in the context of molecular dynamics simulation of model tripeptides and sulfated protein complexes, potentials of mean force for interacting residue pairs, and a survey of the interactions of modified residues among experimental protein structures. Overall, our findings show that for pTyr, bidentate interactions with Arg are particularly dominant, as has been previously demonstrated for pSer. sTyr interactions with Arg are significantly weaker, even as compared to the same interactions made by the Glu residue. Our work sheds light on the distinct nature of these modified tyrosine residues, and provides a physical-chemical foundation for future studies with the goal of understanding their roles in systems of biological interest.

  11. Distribution of pesticide residues in soil and uncertainty of sampling.

    Science.gov (United States)

    Suszter, Gabriela K; Ambrus, Árpád

    2017-08-03

    Pesticide residues were determined in about 120 soil cores taken randomly from the top 15 cm layer of two sunflower fields about 30 days after preemergence herbicide treatments. Samples were extracted with acetone-ethyl acetate mixture and the residues were determined with GC-TSD. Residues of dimethenamid, pendimethalin, and prometryn ranged from 0.005 to 2.97 mg/kg. Their relative standard deviations (CV) were between 0.66 and 1.13. The relative frequency distributions of residues in soil cores were very similar to those observed in root and tuber vegetables grown in pesticide treated soils. Based on all available information, a typical CV of 1.00 was estimated for pesticide residues in primary soil samples (soil cores). The corresponding expectable relative uncertainty of sampling is 20% when composite samples of size 25 are taken. To obtain a reliable estimate of the average residues in the top 15 cm layer of soil of a field up to 8 independent replicate random samples should be taken. To obtain better estimate of the actual residue level of the sampled filed would be marginal if larger number of samples were taken.

  12. A study on the production of agricultural residues in Italy

    Energy Technology Data Exchange (ETDEWEB)

    Di Blasi, C.; Tanzi, V.; Lanzetta, M. [Universita degli Studi di Napoli Federico II, Dip di Ingegneria Chimica, Napoli (Italy)

    1997-12-01

    The Italian production of agricultural residues has been evaluated with a view to energy recovery through gasification. Two main categories of residues have been identified: the first, (A) is associated with the growing and collection of products with a nutritional value, whereas the second (B) includes the residues associated with the subsequent processing in order to obtain final products for commercialization. Category A, which comprises three further sub-categories: straw (A1); woody residues (A2); and stems and leaves (residues from vegetables, tobacco, sugar beet, (A3)), results in about 16.5 mt yr. The average amount of straw (A1) is 11 mt/yr, of which about 60% is waste to be eliminated. Woody residues (A2) (mainly pruning off-cuts from vineyards and olive groves) are about 3.5 mt/yr (85% unused). Category A3 amounts to about 2 mt/yr (90% unused). Straw is available mainly in the northern part of the country, whereas the other two sub-categories are widely distributed in central and southern regions. The yields of category B are estimated at 4 mt/yr, of which more than 3 mt/yr are waste products from grape and olive processing. Other residues, such as rice, sunflower and soya-bean husks (about 0.65 mt/yr), almond and nut shells and fruit stones (about 0.2 mt/yr), although not widely available on a national scale, can be significant on a local basis. The total amount of unused agricultural residues is about 14.5 mt/yr, which, if completely exploited through gasification, can contribute as much as 7-10% to the current national electricity needs. The regions of Veneto, Puglia, Friuli, Lombardia and Emilia Romagna appear to be good candidates for electricity production, given the significant surface concentration of unused residues (105-55 t km{sup 2}). (author)

  13. Identification of Key Residues for Enzymatic Carboxylate Reduction

    Directory of Open Access Journals (Sweden)

    Holly Stolterfoht

    2018-02-01

    Full Text Available Carboxylate reductases (CARs, E.C. 1.2.1.30 generate aldehydes from their corresponding carboxylic acid with high selectivity. Little is known about the structure of CARs and their catalytically important amino acid residues. The identification of key residues for carboxylate reduction provides a starting point to gain deeper understanding of enzymatic carboxylate reduction. A multiple sequence alignment of CARs with confirmed activity recently identified in our lab and from the literature revealed a fingerprint of conserved amino acids. We studied the function of conserved residues by multiple sequence alignments and mutational replacements of these residues. In this study, single-site alanine variants of Neurospora crassa CAR were investigated to determine the contribution of conserved residues to the function, expressability or stability of the enzyme. The effect of amino acid replacements was investigated by analyzing enzymatic activity of the variants in vivo and in vitro. Supported by molecular modeling, we interpreted that five of these residues are essential for catalytic activity, or substrate and co-substrate binding. We identified amino acid residues having significant impact on CAR activity. Replacement of His 237, Glu 433, Ser 595, Tyr 844, and Lys 848 by Ala abolish CAR activity, indicating their key role in acid reduction. These results may assist in the functional annotation of CAR coding genes in genomic databases. While some other conserved residues decreased activity or had no significant impact, four residues increased the specific activity of NcCAR variants when replaced by alanine. Finally, we showed that NcCAR wild-type and mutants efficiently reduce aliphatic acids.

  14. Investigations on chemical-physical conditioning of ashes from the incineration of sewage sludge to deposit on surface landfill site; Untersuchungen zur Chemisch-Physikalischen Behandlung von Klaerschlammverbrennungsasche zur Ablagerung auf oberirdischen Deponien

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, O.; Becker, A. [Technische Univ. Kaiserslautern (Germany). Fachgebiet Bodenmechanik und Grundbau; Scherer, G. [TERRAG Service und Vertrieb GmbH, Homburg (Germany)

    2007-06-15

    Depositing of ashes from the incineration of sewage sludge on landfill is possible after conditioning or within appropriate boxes. The partial high content of chromate- and dichromate- (chrome VI) concentration in the eluate of these slags can cause some difficulties. Presently, disposal of such slags is accomplished in underground spaces. Taking into account the provisions of national laws, possibility is limited. Therefore investigations on deposing of conditioned slags on surface landfills are of growing importance. The binders added to condition the incineration slags were chosen to assess the chemical change of hexavalent chrome (chrome VI) to indissoluble chrome (chrome III). Cement, SAV-residues as well as fly ash were taken as binders. The investigations presented refer to results on mechanical behaviour of conditioned slags. Emphasis is placed on the time-dependent behaviour of strength as well as on water permeability. Several cylindrical samples made by different compounds were tested within a period of about 112 days. Requirements with respect to strength were met within a few days. Demands on the eluate-criteria need additional investigations. (orig.)

  15. Residual Stress Studies Using the Cairo Fourier Diffractometer Facility

    International Nuclear Information System (INIS)

    Maayouf, R.M.A.; El-Shaer, Y.H.

    2002-01-01

    The present paper deals with residual stress studies using the Cairo Fourier diffractometer facility CFDF. The CFDF is a reverse - time of -flight (RTOF) diffractometer; applies a Fourier chopper. The measurements were performed for copper samples in order to study the residual stress after welding. The maximum modulation of the Fourier chopper during the measurements was 136 khz; leading to a time resolution half-width of about 7 μ s. It has been found from the present measurements that, the resulting diffraction spectra could be successfully used for studying the residual stress; in the wavelength range between 0.7-2.9 A degree at ∼ 0.45 % relative resolution

  16. Comparison of destructive and nondestructive assay of heterogeneous salt residues

    International Nuclear Information System (INIS)

    Fleissner, J.G.; Hume, M.W.

    1986-01-01

    To study problems associated with nondestructive assay (NDA) measurements of molten salt residues, a joint study was conducted by the Rocky Flats Plant, Golden, CO and Mound Laboratories, Miamisburg, OH. Extensive NDA measurements were made on nine containers of molten salt residues by both Rocky Flats and Mound followed by dissolution and solution quantification at Rocky Flats. Results of this study verify that plutonium and americium can be measured in such salt residues by a new gamma-ray spectral analysis technique coupled with calorimetry. Biases with respect to the segmented gamma-scan technique were noted

  17. A manual for implementing residual radioactive material guidelines

    International Nuclear Information System (INIS)

    Gilbert, T.L.; Yu, C.; Yuan, Y.C.; Zielen, A.J.; Jusko, M.J.; Wallo, A. III; Argonne National Lab., IL; Dames and Moore, West Valley, NY; Argonne National Lab., IL; USDOE Assistant Secretary for Nuclear Energy, Washington, DC

    1989-06-01

    This manual presents information for implementing US Department of Energy (DOE) guidelines for residual radioactive material at sites identified by the Formerly Utilized Sites Remedial Action Program (FUSRAP) and the Surplus Facilities Management Program (SFMP). It describes the analysis and models used to derive site-specific guidelines for allowable residual concentrations of radionuclides in soil and the design and use of the RESRAD computer code for calculating guideline values. It also describes procedures for implementing DOE policy for reducing residual radioactivity to levels that are as low as reasonably achievable. 36 refs., 16 figs, 22 tabs

  18. Residual stresses in a cast iron automotive brake disc rotor

    International Nuclear Information System (INIS)

    Ripley, Maurice I.; Kirstein, Oliver

    2006-01-01

    Runout, and consequent juddering and pulsation through the brake pedal, is a multi-million dollar per year warranty problem for car manufacturers. There is some suspicion that the runout can be caused by relaxation of residual casting stresses when the disc is overheated during severe-braking episodes. We report here neutron-diffraction measurements of the levels and distribution of residual strains in a used cast iron brake disc rotor. The difficulties of measuring stresses in grey cast iron are outlined and three-dimensional residual-strain distributions are presented and their possible effects discussed

  19. Manual evaluation of residual curarization using double burst stimulation

    DEFF Research Database (Denmark)

    Drenck, N E; Ueda, N; Olsen, Niels Vidiendal

    1989-01-01

    contractions. Fade in the response results from neuromuscular blockade as with train-of-four stimulation (TOF). The authors compared the sensitivity of DBS and TOF in the detection of residual neuromuscular blockade during clinical anaesthesia. Fifty-two healthy patients undergoing surgery were studied...... with DBS than with TOF, regardless of the TOF ratio level. Absence of fade with TOF implied a 48% chance of considerable residual relaxation as compared with 9% when fade was absent with DBS. The results demonstrate that DBS is more sensitive than TOF in the manual detection of residual neuromuscular...

  20. Nonlinear morphoelastic plates I: Genesis of residual stress

    KAUST Repository

    McMahon, J.

    2011-04-28

    Volumetric growth of an elastic body may give rise to residual stress. Here a rigorous analysis is given of the residual strains and stresses generated by growth in the axisymmetric Kirchhoff plate. Balance equations are derived via the Global Constraint Principle, growth is incorporated via a multiplicative decomposition of the deformation gradient, and the system is closed by a response function. The particular case of a compressible neo-Hookean material is analyzed, and the existence of residually stressed states is established. © SAGE Publications 2011.

  1. Measured residual stresses in overlay pipe weldments removed from service

    International Nuclear Information System (INIS)

    Shack, W.J.

    1985-02-01

    Surface and throughwall residual stresses were measured on an elbow-to-pipe weldment that had been removed from the Hatch-2 reactor about a year after the application of a weld overlay. The results were compared with experimental measurements on three mock-up weldments and with finite-element calculations. The comparison shows that there are significant differences in the form and magnitude of the residual stress distributions. However, even after more than a year of service, the residual stresses over most of the inner surface of the actual plant weldment with an overlay were strongly compressive. 3 refs., 7 figs

  2. Measurement of residual stresses by the moire method

    Science.gov (United States)

    Sciammarella, C. A.; Albertazzi, A., Jr.

    Three different applications of the moire method to the determination of residual stresses and strains are presented. The three applications take advantage of the property of ratings to record the changes of the surface they are printed on. One of the applications deals with thermal residual stresses, another with contact residual stress and the third one is a generalization of the blind hole technique. This last application is based on a computer assisted moire technique and on the generalization of the quasi-heterodyne techniques of fringe pattern analysis.

  3. An Additive-Multiplicative Restricted Mean Residual Life Model

    DEFF Research Database (Denmark)

    Mansourvar, Zahra; Martinussen, Torben; Scheike, Thomas H.

    2016-01-01

    mean residual life model to study the association between the restricted mean residual life function and potential regression covariates in the presence of right censoring. This model extends the proportional mean residual life model using an additive model as its covariate dependent baseline....... For the suggested model, some covariate effects are allowed to be time-varying. To estimate the model parameters, martingale estimating equations are developed, and the large sample properties of the resulting estimators are established. In addition, to assess the adequacy of the model, we investigate a goodness...

  4. Use of residue from paper processing as secondary raw material

    International Nuclear Information System (INIS)

    Ernstbrunner, L.

    1994-01-01

    In recent years, the paper industry has been trying to dispose of paper residues by thermal processes in its own, very expensive, combustion plants. Since 1990, the Wopfing Cement Factory, Austria, has been using paper residues in a process for which a patent has now been applied, in a similar way to the method used for the combustion of car tyres in cement rotary kilns. 30.000 t/yr of paper residue is to be processed in Wopfing cement plant from 1995, coming from PWA Ortmann, which is part of a large German paper concern. (author). 4 schemata

  5. Nonlinear morphoelastic plates I: Genesis of residual stress

    KAUST Repository

    McMahon, J.; Goriely, A.; Tabor, M.

    2011-01-01

    Volumetric growth of an elastic body may give rise to residual stress. Here a rigorous analysis is given of the residual strains and stresses generated by growth in the axisymmetric Kirchhoff plate. Balance equations are derived via the Global Constraint Principle, growth is incorporated via a multiplicative decomposition of the deformation gradient, and the system is closed by a response function. The particular case of a compressible neo-Hookean material is analyzed, and the existence of residually stressed states is established. © SAGE Publications 2011.

  6. Case report of recurrent acute appendicitis in a residual tip.

    LENUS (Irish Health Repository)

    O'Leary, Donal P

    2010-01-01

    INTRODUCTION: Residual appendicitis involving the stump of the appendix has been well described in the literature in the past. CASE REPORT: We report the case of a 43 year old male with acute onset of abdominal pain who had undergone an appendicectomy ten years previously. Ultrasound revealed the presence of an inflamed tubular structure. Subsequent laparotomy and histology confirmed that this structure was an inflamed residual appendiceal tip. CONCLUSION: Residual tip appendicitis has not been reported in the literature previously and should be considered in the differential diagnosis of localised peritonitis in a patient with a history of a previous open appendicectomy.

  7. Washing effects of limonene on pesticide residues in green peppers.

    Science.gov (United States)

    Lu, Hai-Yan; Shen, Yan; Sun, Xing; Zhu, Hong; Liu, Xian-Jin

    2013-09-01

    The presence of pesticide residues in food has caused much concern. The low health risks and environmental impacts of limonene make it a very interesting solvent for use in green chemistry. Washing effects of limonene on pesticide residues of methyl chlorpyrifos, chlorothalonil, chlorpyrifos, fenpropathrin and deltamethrin were investigated in green pepper. Results showed that washing with a low concentration of limonene for 5 min (where LOQ is limit of quantitation) caused 53.67%, limonene for 10 min produced 55.90%, limonene for 5 min was the optimal treatment for elimination of pesticide residues in green pepper, considering effect and treatment time as well as cost. © 2013 Society of Chemical Industry.

  8. Detection of residues antibiotics in food using a microbiological method

    International Nuclear Information System (INIS)

    Ben Ali, Ahmed

    2007-01-01

    Antibiotics are effective therapeutic agents because of their property of selective bacterial toxicity which helps controlling infections. Animals, just like humans, can be treated with antibiotics. This use of antibiotics can lead to the development of resistance. Resistant strains may cause severe infections in humans and animals. In addition, antibiotic residues might represent a problem for human health. Our objective is to develop a microbiological method for the detection of antibiotic residues in poultry(muscle, liver,...). For this purpose, antibiotic sensitive bacteria and selective agar media were used. An inhibition growth zone surrounds each of the food samples containing antibiotic residues after a prescribed incubation time. (Author). 23 refs

  9. Radioactivity of combustion residues from coal-fired power stations

    International Nuclear Information System (INIS)

    Vom Berg, W.; Puch, K.H.

    1996-01-01

    Each year in Germany, about 18 mill. t of combustion residues are produced from the combustion of bituminous coal and lignite. They are utilized to a great extent in the construction industry and in mining. During the combustion of coal, the radio-nuclides remain predominantly in the ash. The radionuclide concentration in lignite ash is within the range of that in natural soil. The combustion residues of bituminous coal contain radio-nuclides of a similar order of magnitude as also can occur in natural rock. The utilization of combustion residues in construction materials makes a negligible contribution to radiation exposure through retention in buildings. (orig.) [de

  10. Ceramic residue for producing cements, method for the production thereof, and cements containing same

    OpenAIRE

    Sánchez de Rojas, María Isabel; Frías, Moisés; Asensio, Eloy; Medina Martínez, César

    2014-01-01

    [EN] The invention relates to a ceramic residue produced from construction and demolition residues, as a puzzolanic component of cements. The invention also relates to a method for producing said ceramic residues and to another method of producing cements using said residues. This type of residue is collected in recycling plants, where it is managed. This invention facilitates a potential commercial launch.

  11. Prediction of residual stress distributions due to surface machining and welding and crack growth simulation under residual stress distribution

    International Nuclear Information System (INIS)

    Ihara, Ryohei; Katsuyama, JInya; Onizawa, Kunio; Hashimoto, Tadafumi; Mikami, Yoshiki; Mochizuki, Masahito

    2011-01-01

    Research highlights: → Residual stress distributions due to welding and machining are evaluated by XRD and FEM. → Residual stress due to machining shows higher tensile stress than welding near the surface. → Crack growth analysis is performed using calculated residual stress. → Crack growth result is affected machining rather than welding. → Machining is an important factor for crack growth. - Abstract: In nuclear power plants, stress corrosion cracking (SCC) has been observed near the weld zone of the core shroud and primary loop recirculation (PLR) pipes made of low-carbon austenitic stainless steel Type 316L. The joining process of pipes usually includes surface machining and welding. Both processes induce residual stresses, and residual stresses are thus important factors in the occurrence and propagation of SCC. In this study, the finite element method (FEM) was used to estimate residual stress distributions generated by butt welding and surface machining. The thermoelastic-plastic analysis was performed for the welding simulation, and the thermo-mechanical coupled analysis based on the Johnson-Cook material model was performed for the surface machining simulation. In addition, a crack growth analysis based on the stress intensity factor (SIF) calculation was performed using the calculated residual stress distributions that are generated by welding and surface machining. The surface machining analysis showed that tensile residual stress due to surface machining only exists approximately 0.2 mm from the machined surface, and the surface residual stress increases with cutting speed. The crack growth analysis showed that the crack depth is affected by both surface machining and welding, and the crack length is more affected by surface machining than by welding.

  12. The nev diffractometer ARES for the analysis of residual stresses

    Czech Academy of Sciences Publication Activity Database

    Staron, P.; Ruhnau, H. U.; Marmotti, M.; Mikula, Pavol; Kampmann, R.

    276/278, - (2000), s. 158-159 ISSN 0921-4526 Institutional research plan: CEZ:AV0Z1048901 Keywords : neutron instruments * residual stress Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.893, year: 2000

  13. Preparing hydraulic cement from oil-shale residue

    Energy Technology Data Exchange (ETDEWEB)

    1921-08-28

    A process for preparation of hydraulic cement from oil-shale residue is characterized in that, as flux is used, rich-in-lime poor-in-sulfur portland-cement clinker, by which the usual gypsum addition, is avoided.

  14. Neutron diffraction measurement of residual stress in NPP construction materials

    International Nuclear Information System (INIS)

    Hinca, R.; Bokuchava, G.

    2000-01-01

    The aim of the investigation is to study the level of residual stresses induced by the surfacing in the weld deposit zone and in the base metal, where considerable thermal gradients are present. Surfacing high-nickel filler on an austenitic base metal is one of techniques in repair of primary collector the primary circuit of nuclear power plant type VVER. The repair technology was developed at Welding Research Institute Bratislava. Measurements of residual stresses in the weld overlay and the base metal are necessary for approving the mechanical analysis and verifying of residual stresses determination on welded material by numerical weld g computer simulation. Investigations of residual stresses are important for developing optimal welding techniques. (authors)

  15. A review of residual stress analysis using thermoelastic techniques

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, A F; Dulieu-Barton, J M; Quinn, S [University of Southampton, School of Engineering Sciences, Highfield, Southampton, SO17 1BJ (United Kingdom); Burguete, R L [Airbus UK Ltd., New Filton House, Filton, Bristol, BS99 7AR (United Kingdom)

    2009-08-01

    Thermoelastic Stress Analysis (TSA) is a full-field technique for experimental stress analysis that is based on infra-red thermography. The technique has proved to be extremely effective for studying elastic stress fields and is now well established. It is based on the measurement of the temperature change that occurs as a result of a stress change. As residual stress is essentially a mean stress it is accepted that the linear form of the TSA relationship cannot be used to evaluate residual stresses. However, there are situations where this linear relationship is not valid or departures in material properties due to manufacturing procedures have enabled evaluations of residual stresses. The purpose of this paper is to review the current status of using a TSA based approach for the evaluation of residual stresses and to provide some examples of where promising results have been obtained.

  16. A review of residual stress analysis using thermoelastic techniques

    International Nuclear Information System (INIS)

    Robinson, A F; Dulieu-Barton, J M; Quinn, S; Burguete, R L

    2009-01-01

    Thermoelastic Stress Analysis (TSA) is a full-field technique for experimental stress analysis that is based on infra-red thermography. The technique has proved to be extremely effective for studying elastic stress fields and is now well established. It is based on the measurement of the temperature change that occurs as a result of a stress change. As residual stress is essentially a mean stress it is accepted that the linear form of the TSA relationship cannot be used to evaluate residual stresses. However, there are situations where this linear relationship is not valid or departures in material properties due to manufacturing procedures have enabled evaluations of residual stresses. The purpose of this paper is to review the current status of using a TSA based approach for the evaluation of residual stresses and to provide some examples of where promising results have been obtained.

  17. Dissipation and residue of bifenthrin in wheat under field conditions.

    Science.gov (United States)

    You, Xiangwei; Jiang, Naiwen; Liu, Fengmao; Liu, Congyun; Wang, Suli

    2013-02-01

    Field trials were carried out to investigate the dissipation and residue levels of bifenthrin in wheat. After extraction with acetonitrile, the samples were cleaned up by dispersive solid-phase extraction and detected by gas chromatography-mass spectrometry. The half-lives of bifenthrin in wheat seedlings ranged from 2.4 to 10.5 days. At harvest time, the terminal residues of bifenthrin were below the maximum residue limit (0.5 mg/kg) set by Codex Alimentarius Committee or European Union in wheat grain, which suggested that the use of this pesticide was safe for humans. However, the relatively high residue levels of bifenthrin in wheat straw should be paid attention to.

  18. Endosulfan residues in fish from the MUDA rice agroecosystem

    International Nuclear Information System (INIS)

    Nashriyah Mat; Sabri Junoh; Nuriati Nurdin

    2002-01-01

    A study was carried out in the recycled and the non-recycled areas of the Muda rice agroecosystem to determine the residue level of endosulfan in rice field fish. Snakehead or haruan (Channa striata), climbing perch or puyu (Anabas testudineus), walking catfish or keli (Clariasspp.) and snakeskin gouramy or sepat siam (Trichogasterpectoralis) were sampled and the tissues analysed using Gas Liquid Chromatography. Endosulfan sulphate metabolite was a ubiquitous residue in all fish at levels ranging from 0.0065 μg/g to 0.9837 μg/g of tissue wet weight whilst α-isomer was detected at a much lower concentration followed by β-isomer. In Channa striata, endosulfan total residue (α+β+sulphate) was accumulated in fish tissues sampled at ACRBD4 (non-recycled) site followed by Blok 14 (recycled) site. Endosulfan residue concentration did not coincide with water recycling practice nor changes in EROD enzyme activity. (Author)

  19. Bioconversion of sago residue into value added products

    African Journals Online (AJOL)

    USER

    2010-04-05

    Apr 5, 2010 ... In Sarawak, East Malaysia, agro-residues from sago starch processing industries are ... conversion to animal food or fuel ethanol (Species. Profiles for Pacific Island ..... serious contamination of the rivers. Based on study by.

  20. Finite Element Residual Stress Analysis of Planetary Gear Tooth

    Directory of Open Access Journals (Sweden)

    Jungang Wang

    2013-01-01

    Full Text Available A method to simulate residual stress field of planetary gear is proposed. In this method, the finite element model of planetary gear is established and divided to tooth zone and profile zone, whose different temperature field is set. The gear's residual stress simulation is realized by the thermal compression stress generated by the temperature difference. Based on the simulation, the finite element model of planetary gear train is established, the dynamic meshing process is simulated, and influence of residual stress on equivalent stress of addendum, pitch circle, and dedendum of internal and external meshing planetary gear tooth profile is analyzed, according to non-linear contact theory, thermodynamic theory, and finite element theory. The results show that the equivalent stresses of planetary gear at both meshing and nonmeshing surface are significantly and differently reduced by residual stress. The study benefits fatigue cracking analysis and dynamic optimization design of planetary gear train.