#### Sample records for residue number systems

1. Residue number systems theory and applications

CERN Document Server

Mohan, P V Ananda

2016-01-01

This new and expanded monograph improves upon Mohan's earlier book, Residue Number Systems (Springer, 2002) with a state of the art treatment of the subject. Replete with detailed illustrations and helpful examples, this book covers a host of cutting edge topics such as the core function, the quotient function, new Chinese Remainder theorems, and large integer operations. It also features many significant applications to practical communication systems and cryptography such as FIR filters and elliptic curve cryptography. Starting with a comprehensive introduction to the basics and leading up to current research trends that are not yet widely distributed in other publications, this book will be of interest to both researchers and students alike.

2. Constant-coefficient FIR filters based on residue number system arithmetic

Directory of Open Access Journals (Sweden)

Stamenković Negovan

2012-01-01

Full Text Available In this paper, the design of a Finite Impulse Response (FIR filter based on the residue number system (RNS is presented. We chose to implement it in the (RNS, because the RNS offers high speed and low power dissipation. This architecture is based on the single RNS multiplier-accumulator (MAC unit. The three moduli set {2n+1,2n,2n-1}, which avoids 2n+1 modulus, is used to design FIR filter. A numerical example illustrates the principles of residue encoding, residue arithmetic, and residue decoding for FIR filters.

3. Low-power implementation of polyphase filters in Quadratic Residue Number System

DEFF Research Database (Denmark)

Cardarilli, Gian Carlo; Re, Andrea Del; Nannarelli, Alberto

2004-01-01

The aim of this work is the reduction of the power dissipated in digital filters, while maintaining the timing unchanged. A polyphase filter bank in the Quadratic Residue Number System (QRNS) has been implemented and then compared, in terms of performance, area, and power dissipation...... to the implementation of a polyphase filter bank in the traditional two's complement system (TCS). The resulting implementations, designed to have the same clock rates, show that the QRNS filter is smaller and consumes less power than the TCS one....

4. A new VLSI complex integer multiplier which uses a quadratic-polynomial residue system with Fermat numbers

Science.gov (United States)

Shyu, H. C.; Reed, I. S.; Truong, T. K.; Hsu, I. S.; Chang, J. J.

1987-01-01

A quadratic-polynomial Fermat residue number system (QFNS) has been used to compute complex integer multiplications. The advantage of such a QFNS is that a complex integer multiplication requires only two integer multiplications. In this article, a new type Fermat number multiplier is developed which eliminates the initialization condition of the previous method. It is shown that the new complex multiplier can be implemented on a single VLSI chip. Such a chip is designed and fabricated in CMOS-Pw technology.

5. FPGA Implementation of Uniform Random Number based on Residue Method

Directory of Open Access Journals (Sweden)

Zulfikar .

2014-04-01

Full Text Available This paper presents the implementation and comparisons of uniform random number on Field Programable Gate Array (FPGA. Uniform random numbers are generated based on residue method. The circuit of generating uniform random number is presented in general view. The circuit is constructed from a multiplexer, a multiplier, buffers and some basic gates. FPGA implementation of the designed circuit has been done into various Xilinx chips. Simulation results are viewed clearly in the paper. Random numbers are generated based on different parameters. Comparisons upon occupied area and maximum frequency from different Xilinx chip are examined. Virtex 7 is the fastest chip and Virtex 4 is the best choice in terms of occupied area. Finally, Uniform random numbers have been generated successfully on FPGA using residue method.Keywords: FPGA implementation, random number, uniform random number, residue method, Xilinx chips

6. Hawaiian Number Systems.

Science.gov (United States)

Hughes, Barnabas

1982-01-01

The history of Hawaiian number systems is examined, and answers to questions regarding Hawaiian number words, including their origin and factors that influenced their development, are covered. A brief guide for pronouncing Hawaiian words is also provided. (MP)

7. The number system

CERN Document Server

Thurston, H A

2007-01-01

The teaching of mathematics has undergone extensive changes in approach, with a shift in emphasis from rote memorization to acquiring an understanding of the logical foundations and methodology of problem solving. This book offers guidance in that direction, exploring arithmetic's underlying concepts and their logical development.This volume's great merit lies in its wealth of explanatory material, designed to promote an informal and intuitive understanding of the rigorous logical approach to the number system. The first part explains and comments on axioms and definitions, making their subseq

8. Embedded systems design with special arithmetic and number systems

CERN Document Server

Sousa, Leonel; Chang, Chip-Hong

2017-01-01

This book introduces readers to alternative approaches to designing efficient embedded systems using unconventional number systems. The authors describe various systems that can be used for designing efficient embedded and application-specific processors, such as Residue Number System, Logarithmic Number System, Redundant Binary Number System Double-Base Number System, Decimal Floating Point Number System and Continuous Valued Number System. Readers will learn the strategies and trade-offs of using unconventional number systems in application-specific processors and be able to apply and design appropriate arithmetic operations from these number systems to boost the performance of digital systems. • Serves as a single-source reference to designing embedded systems with unconventional number systems • Covers theory as well as implementation on application-specific processors • Explains mathematical concepts in a manner accessible to readers with diverse backgrounds.

9. Generic GPCR residue numbers - aligning topology maps while minding the gaps

DEFF Research Database (Denmark)

Isberg, Vignir; de Graaf, Chris; Bortolato, Andrea

2015-01-01

structures for classes B, C, and F now call for a community consensus in residue numbering within and across these classes. Furthermore, the structural era has uncovered helix bulges and constrictions that offset the generic residue numbers. The use of generic residue numbers depends on convenient access...... by pharmacologists, chemists, and structural biologists. We review the generic residue numbering schemes for each GPCR class, as well as a complementary structure-based scheme, and provide illustrative examples and GPCR database (GPCRDB) web tools to number any receptor sequence or structure....

10. Sustainable System for Residual Hazards Management

International Nuclear Information System (INIS)

Kevin M. Kostelnik; James H. Clarke; Jerry L. Harbour

2004-01-01

Hazardous, radioactive and other toxic substances have routinely been generated and subsequently disposed of in the shallow subsurface throughout the world. Many of today's waste management techniques do not eliminate the problem, but rather only concentrate or contain the hazardous contaminants. Residual hazards result from the presence of hazardous and/or contaminated material that remains on-site following active operations or the completion of remedial actions. Residual hazards pose continued risk to humans and the environment and represent a significant and chronic problem that require continuous long-term management (i.e. >1000 years). To protect human health and safeguard the natural environment, a sustainable system is required for the proper management of residual hazards. A sustainable system for the management of residual hazards will require the integration of engineered, institutional and land-use controls to isolate residual contaminants and thus minimize the associated hazards. Engineered controls are physical modifications to the natural setting and ecosystem, including the site, facility, and/or the residual materials themselves, in order to reduce or eliminate the potential for exposure to contaminants of concern (COCs). Institutional controls are processes, instruments, and mechanisms designed to influence human behavior and activity. System failure can involve hazardous material escaping from the confinement because of system degradation (i.e., chronic or acute degradation) or by external intrusion of the biosphere into the contaminated material because of the loss of institutional control. An ongoing analysis of contemporary and historic sites suggests that the significance of the loss of institutional controls is a critical pathway because decisions made during the operations/remedial action phase, as well as decisions made throughout the residual hazards management period, are key to the long-term success of the prescribed system. In fact

11. Cancellative Residuated Lattices Arising on 2-Generated Submonoids of Natural Numbers

Czech Academy of Sciences Publication Activity Database

Horčík, Rostislav

2010-01-01

Roč. 63, 2-3 (2010), s. 261-274 ISSN 0002-5240 R&D Projects: GA AV ČR KJB100300701 Institutional research plan: CEZ:AV0Z10300504 Keywords : residuated lattice * cancellative commutative residuated lattice * subvariety lattice * submonoid of natural numbers Subject RIV: BA - General Mathematics Impact factor: 0.479, year: 2010

12. CAREM-25: Residual heat removal system

International Nuclear Information System (INIS)

Arvia, Roberto P.; Coppari, Norberto R.; Gomez de Soler, Susana M.; Ramilo, Lucia B.

2000-01-01

The objective of this work was the definition and consolidation of the residual heat removal system for the CAREM 25 reactor. The function of this system is cool down the primary circuit, removing the core decay heat from hot stand-by to cold shutdown and during refueling. In addition, this system heats the primary water from the cold shutdown condition to hot stand-by condition during the reactor start up previous to criticality. The system has been designed according to the requirements of the standards: ANSI/ANS 51.1 'Nuclear safety criteria for the design of stationary PWR plants'; ANSI/ANS 58.11 'Design criteria for safe shutdown following selected design basis events in light water reactors' and ANSI/ANS 58.9 'Single failure criteria for light water reactor safety-related fluid systems'. The suggested design fulfills the required functions and design criteria standards. (author)

13. The magic of a number system

DEFF Research Database (Denmark)

Elmasry, Amr Ahmed Abd Elmoneim; Jensen, Claus; Katajainen, Jyrki

2010-01-01

We introduce a new number system that supports increments with a constant number of digit changes. We also give a simple method that extends any number system supporting increments to support decrements using the same number of digit changes. In the new number system the weight of the ith digit i...

14. Children's mappings between number words and the approximate number system.

Science.gov (United States)

Odic, Darko; Le Corre, Mathieu; Halberda, Justin

2015-05-01

15. Residual energy applications program systems analysis report

Energy Technology Data Exchange (ETDEWEB)

Yngve, P.W.

1980-10-01

Current DOE plans call for building an Energy Applied Systems Test (EAST) Facility at the Savannah River Plant in close proximity to the 140 to 150/sup 0/F waste heat from one of several operating nuclear reactors. The waste water flow from each reactor, approximately 165,000 gpm, provides a unique opportunity to test the performance and operating characteristics of large-scale waste heat power generation and heat pump system concepts. This report provides a preliminary description of the potential end-use market, parametric data on heat pump and the power generation system technology, a preliminary listing of EAST Facility requirements, and an example of an integrated industrial park utilizing the technology to maximize economic pay back. The parametric heat pump analysis concluded that dual-fluid Rankine cycle heat pumps with capacities as high as 400 x 10/sup 6/ Btu/h, can utilize large sources of low temperature residual heat to provide 300/sup 0/F saturatd steam for an industrial park. The before tax return on investment for this concept is 36.2%. The analysis also concluded that smaller modular heat pumps could fulfill the same objective while sacrificing only a moderate rate of return. The parametric power generation analysis concluded that multi-pressure Rankine cycle systems not only are superior to single pressure systems, but can also be developed for large systems (approx. = 17 MW/sub e/). This same technology is applicable to smaller systems at the sacrifice of higher investment per unit output.

16. Number Systems. Popular Lectures in Mathematics.

Science.gov (United States)

Fomin, S. V.

The origin, properties, and applications of various number systems are discussed. Among the 15 topics discussed are: tests for divisibility, the binary system, the game of Nim, computers, and infinite number representations. (MK)

17. The Decimal Number System and Young Children

Science.gov (United States)

Harrison, John

2006-01-01

In this article, the author believes that a visual image of the number system is helpful to everyone, especially children, in understanding what is, after all, an abstract idea. The simplest model is the number line, a row of equally spaced numbers, starting at zero. This illustrates the continuous progression of the natural numbers, moving to the…

18. Moire interferometry and hole drilling system for residual stress measurement

Science.gov (United States)

Ya, Min; Dai, Fulong; Lu, Jian

2003-04-01

A combined system of four beams moire interferometer and incremental hole-driling machine was designed and applied for residual stress measurement. Two typical experiments were done using this system: non-uniform in-depth residual stress measurement of an ultrasonic shot-peening Aluminum plate; non-uniform in-plane residual stress measurement of an elastic-plastic Aluminum bent beam. Experiments results show good accordant with other measurement results and theory analysis results.

19. Bio-electrospraying and droplet-based microfluidics: control of cell numbers within living residues

Energy Technology Data Exchange (ETDEWEB)

Hong Jongin; DeMello, Andrew J [Nanostructured Materials and Devices Group, Department of Chemistry, Imperial College London, Exhibition Road, London SW7 2AZ (United Kingdom); Jayasinghe, Suwan N, E-mail: a.demello@imperial.ac.u, E-mail: s.jayasinghe@ucl.ac.u [BioPhysics Group, Department of Mechanical Engineering, University College London, Torrington Place, London WC1E 7JE (United Kingdom)

2010-04-15

Bio-electrospraying (BES) has demonstrated great promise as a rapidly evolving strategy for tissue engineering and regenerative biology/medicine. Since its discovery in 2005, many studies have confirmed that cells (immortalized, primary and stem cells) and whole organisms (Danio rerio, Xenopus tropicalis, Caenorhabditis elegans to Drosophila) remain viable post-bio-electrospraying. Although this bio-protocol has achieved much, it suffers from one crucial problem, namely the ability to precisely control the number of cells within droplets and or encapsulations. If overcome, BES has the potential to become a high-efficiency biotechnique for controlled cell encapsulation, a technique most useful for a wide range of applications in biology and medicine ranging from the forming of three-dimensional cultures to an approach for treating diseases such as type I diabetes. In this communication, we address this issue by demonstrating the coupling of BES with droplet-based microfluidics for controlling live cell numbers within droplets and residues. (communication)

20. Effect of crop residue management and cropping system on pearl ...

African Journals Online (AJOL)

Retaining crop residues in the field and using legume-based crop rotations have been suggested as ways to simultaneously increase yields per unit area and replenish soil nutrients. The objective of this study was to investigate the influence of two cropping systems and three crop residue management practices on grain ...

1. Development of an NPP residual lifetime evaluation system

International Nuclear Information System (INIS)

Regano, M.; Ibanez, M.; Hevia, F.

1993-01-01

Various reasons have given rise to the need for residual life management of Spain's nuclear power plants which lead to the a project for the development of a residual lifetime evaluation system managed by UNESA and supported by the owner groups. This project is described. 1 fig

2. Coset Group Construction of Multidimensional Number Systems

Directory of Open Access Journals (Sweden)

Horia I. Petrache

2014-07-01

Full Text Available Extensions of real numbers in more than two dimensions, in particular quaternions and octonions, are finding applications in physics due to the fact that they naturally capture symmetries of physical systems. However, in the conventional mathematical construction of complex and multicomplex numbers multiplication rules are postulated instead of being derived from a general principle. A more transparent and systematic approach is proposed here based on the concept of coset product from group theory. It is shown that extensions of real numbers in two or more dimensions follow naturally from the closure property of finite coset groups adding insight into the utility of multidimensional number systems in describing symmetries in nature.

3. Complex Binary Number System Algorithms and Circuits

CERN Document Server

Jamil, Tariq

2013-01-01

This book is a compilation of the entire research work on the topic of Complex Binary Number System (CBNS) carried out by the author as the principal investigator and members of his research groups at various universities during the years 1992-2012. Pursuant to these efforts spanning several years, the realization of CBNS as a viable alternative to represent complex numbers in an 'all-in-one' binary number format has become possible and efforts are underway to build computer hardware based on this unique number system. It is hoped that this work will be of interest to anyone involved in computer arithmetic and digital logic design and kindle renewed enthusiasm among the engineers working in the areas of digital signal and image processing for developing newer and efficient algorithms and techniques incorporating CBNS.

4. Biogas systems for sisal and other agro-industrial residues

Energy Technology Data Exchange (ETDEWEB)

Jungersen, G. [Danish Technological Inst., Section for Biotechnology, Taastrup (Denmark)

1997-12-31

Most of the East-African agro-industries are generating very large quantities of organic residues from production and processing of different crops. In the East-African Region the most important of these crops are: Sisal, Sugar, Coffee, Cashew nuts and Pineapple. In other 3. world countries, Palm oil and Cassava (Tapioca starch) processing are main producers of organic waste products. Moreover, large quantities of organic residues are generated from other food processing activities like breweries, consumption of bananas etc. The following pages give examples of setups and system designs of anaerobic treatment systems for some of the residues mentioned above. When considering anaerobic treatment of sisal residues, which constitutes the main agro-industrial biomass resource in Tanzania, two major issues should be considered: Optimal reactor set-up and performance; And optionally, potential methods for pre-treatment of fibre fraction in order to increase the methane yield. The sisal liquid residues are degraded very fast and efficiently in UASB systems. At COD loading rates less than 11 kg COD/m{sup 3} x day, the reduction in organic matter is more than 90% and methane yields obtained are between 373 and 377 ml CH{sub 4}/g COD reduced. The treatment of sisal solid residues in CSTR systems has been examined both at mesophilic (37 deg. C) and thermophilic temperatures (55 deg. C.). (EG)

5. Systems for harvesting and handling cotton plant residue

Energy Technology Data Exchange (ETDEWEB)

Coates, W. [Univ. of Arizona, Tucson, AZ (United States)

1993-12-31

In the warmer regions of the United States, cotton plant residue must be buried to prevent it from serving as an overwintering site for insect pests such as the pink bollworm. Most of the field operations used to bury the residue are high energy consumers and tend to degrade soil structure, thereby increasing the potential for erosion. The residue is of little value as a soil amendment and consequently is considered a negative value biomass. A commercial system to harvest cotton plant residue would be of both economic and environmental benefit to cotton producers. Research has been underway at the University of Arizona since the spring of 1991 to develop a commercially viable system for harvesting cotton plant residue. Equipment durability, degree of densification, energy required, cleanliness of the harvested material, and ease of product handling and transport are some of the performance variables which have been measured. Two systems have proven superior. In both, the plants are pulled from the ground using an implement developed specifically for the purpose. In one system, the stalks are baled using a large round baler, while in the other the stalks are chopped with a forage harvester, and then made into packages using a cotton module maker. Field capacities, energy requirements, package density and durability, and ease of handling with commercially available equipment have been measured for both systems. Selection of an optimum system for a specific operation depends upon end use of the product, and upon equipment availability.

6. Persistent organochlorine pesticide residues in freshwater systems ...

African Journals Online (AJOL)

, heptachlor and endosulfan were determined in water and sediment samples of freshwater systems in the Eastern Cape Province of South Africa that receive runoff from agricultural lands and effluents from industries. The organochlorine ...

7. Valve arrangement for a nuclear plant residual heat removal system

International Nuclear Information System (INIS)

Fidler, G.L.; Hill, R.A.; Carrera, J.P.

1978-01-01

Disclosed is an improved valve arrangement for a two-train Residual Heat Removal System (RHRS) of a nuclear reactor plant which ensures operational integrity of the system under single failure circumstances including loss of one of two electrical power sources

8. A Defense of an Amodal Number System

Directory of Open Access Journals (Sweden)

Abel Wajnerman Paz

2018-04-01

Full Text Available It has been argued that the approximate number system (ANS constitutes a problem for the grounded approach to cognition because it implies that some conceptual tasks are performed by non-perceptual systems. The ANS is considered non-perceptual mainly because it processes stimuli from different modalities. Jones (2015 has recently argued that this system has many features (such as being modular which are characteristic of sensory systems. Additionally, he affirms that traditional sensory systems also process inputs from different modalities. This suggests that the ANS is a perceptual system and therefore it is not problematic for the grounded view. In this paper, I defend the amodal approach to the ANS against these two arguments. In the first place, perceptual systems do not possess the properties attributed to the ANS and therefore these properties do not imply that the ANS is perceptual. In the second place, I will propose that a sensory system only needs to be dedicated to process modality-specific information, which is consistent with responding to inputs from different modalities. I argue that the cross-modal responses exhibited by traditional sensory systems are consistent with modality-specific information whereas some responses exhibited by the ANS are not.

9. On conditional residual lifetime and conditional inactivity time of k-out-of-n systems

International Nuclear Information System (INIS)

Tavangar, Mahdi; Bairamov, Ismihan

2015-01-01

In designing structures of technical systems, the reliability engineers often deal with the reliability analysis of coherent systems. Coherent system has monotone structure function and all components of the system are relevant. This paper considers some particular models of coherent systems having identical components with independent lifetimes. The main purpose of the paper is to study conditional residual lifetime of coherent system, given that at a fixed time certain number of components have failed but still there are some functioning components. Different aging and stochastic properties of variables connected with the conditional residual lifetimes of the coherent systems are obtained. An expression for the parent distribution in terms of conditional mean residual lifetime is provided. The similar result is obtained for the conditional mean inactivity time of the failed components of coherent system. The conditional mean inactivity time of failed components presents an interest in many engineering applications where the reliability of system structure is important for designing and constructing of systems. Some illustrative examples with given particular distributions are also presented. - Highlights: • Comparisons of conditional residual lifetime of k-out-of-n systems are derived. • The behavior of the coherent system is explored for IHR distributions. • The parent distribution is expressed in terms of conditional MRL and MIT. • Some illustrative examples are given to clarify the results of the paper.

10. Health condition and residual life of deteriorating technical systems

Energy Technology Data Exchange (ETDEWEB)

Reinertsen, Rune

1997-12-31

Many offshore installations in the Norwegian Sector of the North Sea approach the end of their useful life. The same is true of many power plants and technical systems in general. This thesis describes the theory and improves the methods for the determination of the health condition and residual life of technical systems. Rather than developing new methods it discusses new ways of using existing statistical methods. The main contributions are: (1) A survey of the literature of diagnosis, prediction and life extension for deteriorating technical systems, (2) A discussion of some consequences of selecting the wrong life model, (3) A description of problems related to the determination of mean residual life of non-repairable technical systems, (4) Presentation of the concept of technical health to describe the soundness of a system exposed to failure mechanisms, (5) A model for predicting the technical health and residual life of a corroding system, (6) Recommends requirements and methods for using expert knowledge in safety and reliability analysis, (7) A general inspection strategy for system fault diagnosis by using Shannon entropy, (8) Points out weaknesses and strengths of risk measures used in the offshore industry today. 237 refs., 23 figs., 6 tabs.

11. Characteristic of oil palm residue for energy conversion system

International Nuclear Information System (INIS)

Muharnif; Zainal, Z.A.

2006-01-01

Malaysia is the major producer of palm oil in the world. It produces 8.5 tones per year (8.5 x 10 6 ty -1 ) of palm oil from 38.6 x 10 6 ty - 1 of fresh fruit bunches. Palm oil production generates large amounts of process residue such as fiber (5.4 x 10 6 ty - 1 ), shell (2.3 x 10 6 ty - 1 ), and empty fruit bunches (8.8 x 10 6 ty - 1 ). A large fraction of the fiber and much of the shell are used as fuel to generate process steam and electricity. The appropriate energy conversion system depends on the characteristic of the oil palm residue. In this paper, a description of characteristic of the oil palm residue is presented. The types of the energy conversion system presented are stoker type combustor and gasified. The paper focuses on the pulverized biomass material and the use of fluidized bed gasified. In the fluidized bed gasified, the palm shell and fiber has to be pulverized before feeding into gasified. For downdraft gasified and furnace, the palm shell and fiber can be used directly into the reactor for energy conversion. The heating value, burning characteristic, ash and moisture content of the oil palm residue are other parameters of the study

12. Clustering-driven residue filter for profile measurement system.

Science.gov (United States)

Jiang, Jun; Cheng, Jun; Zhou, Ying; Chen, Guang

2011-02-01

The profile measurement system is widely used in industrial quality control, and phase unwrapping (PU) is a key technique. An algorithm-driven PU is often used to reduce the impact of noise-induced residues to retrieve the most reliable solution. However, measuring speed is lowered due to the searching of optimal integration paths or correcting of phase gradients. From the viewpoint of the rapidity of the system, this paper characterizes the noise-induced residues, and it proposes a clustering-driven residue filter based on a set of directional windows. The proposed procedure makes the wrapped phases included in the filtering window have more similar values, and it groups the correct and noisy phases into individual clusters along the local fringe direction adaptively. It is effective for the tightly packed fringes, and it converts the algorithm-driven PU to the residue-filtering-driven one. This improves the operating speed of the 3D reconstruction significantly. The tests performed on simulated and real projected fringes confirm the validity of our approach.

13. Residual HCRF rotation relative to the inertial coordinate system

Science.gov (United States)

Bobylev, V. V.

2015-03-01

VLBI measurements of the absolute proper motions of 23 radio stars have been collected from published data. These are stars with maser emission, or very young stars, or asymptotic-giant-branch stars. By comparing these measurements with the stellar proper motions from the optical catalogs of the Hipparcos Celestial Reference Frame (HCRF), we have found the components of the residual rotation vector of this frame relative to the inertial coordinate system: ( ω x , ω y , ω z ) = (-0.39, -0.51, -1.25) ± (0.58, 0.57, 0.56) mas yr-1. Based on all the available data, we have determined new values of the components of the residual rotation vector for the optical realization of the HCRF relative to the inertial coordinate system: ( ω x , ω y , ω z ) = (-0.15, +0.24,-0.53) ± (0.11, 0.10, 0.13) mas yr-1.

14. Residual life estimation of electrical insulation system for rotating equipment

International Nuclear Information System (INIS)

Vashishtha, Y.D.; Gupta, A.K.; Bhattacharyya, A.K.; Verma, A.K.

1994-01-01

Residual life assessment gains significance towards the end of designed life for granting plant life extensions and resource planning for costly equipment replacement. A critical review of all the diagnostic techniques presently used to assess either health of insulation system or to infer qualitatively the remaining life for rotating machines is presented. However more emphasis is required on developing quantitative methods. This paper also formulates the experimental plan for progressively censored ageing tests, measurement of partial discharge parameters, micro-structural study for delamination and electrical tree growth and measurement of electrical breakdown strength. Partial discharge (PD) patterns, electrical tree growth and time to failure data shall be taken as training set for the neural network learning which can be useful to predict residual life with only one candidate parameter i.e. PD patterns. (author). 9 refs

15. System Study: Residual Heat Removal 1998–2013

Energy Technology Data Exchange (ETDEWEB)

Schroeder, John Alton [Idaho National Lab. (INL), Idaho Falls, ID (United States). Risk Assessment and Management Services Dept.

2015-02-01

This report presents an unreliability evaluation of the residual heat removal (RHR) system in two modes of operation (low-pressure injection in response to a large loss-of-coolant accident and post-trip shutdown-cooling) at 104 U.S. commercial nuclear power plants. Demand, run hours, and failure data from fiscal year 1998 through 2013 for selected components were obtained from the Institute of Nuclear Power Operations (INPO) Consolidated Events Database (ICES). The unreliability results are trended for the most recent 10-year period while yearly estimates for system unreliability are provided for the entire active period. No statistically significant trends were identified in the RHR results.

16. New capillary number definition for displacement of residual nonwetting phase in natural fractures

NARCIS (Netherlands)

Alquaimi, B.; Rossen, W.R.

2017-01-01

We propose a new capillary number for flow in fractures starting with a force balance on a trapped ganglion in a fracture. The new definition is validated with laboratory experiments using five distinctive model fractures. Capillary desaturation curves were generated experimentally using

17. Minimizing Residual Pressure within a Windowless Gas Target System - JENSA

Science.gov (United States)

Gomez, Orlando; Browne, Justin; Kontos, Antonios; Montes, Fernando; Jensa Collaboration

2015-04-01

Nuclear reactions between light gases and radioactive isotope beams are essential to address open questions in nuclear structure and astrophysics. Pure light gas targets are critical for the measurements of proton- and alpha-induced reactions. J _ et E _ xperiments in N _ uclear S _ tructure and A _ strophysics (JENSA) is the world's most dense (~ 1019 atoms/cm2) windowless gas target system. Most of the gas flow is localized; however, escaping gas creates a pressure gradient which degrades experimental measurements and contaminates the beam line. JENSA contains a differential pumping system to maintain a vacuum. The previous design configuration was not optimized for experiments (pressure measurements 70 cm downstream from the jet were ~ 10-3 torr; optimal is less than 10-4 torr). We have altered the current differential pumping system to minimize the residual pressure profile. Several configurations of two gas-receiving catchers were tested, and the most efficient ones identified using Enhanced Pirani and Cold Cathode gauges. We have determined the 30 mm outer and 20 mm inner gas-receiving cones minimize JENSA central chamber pressure to 200 millitorr at 16,000 torr of discharge pressure. Altering the tubing configuration has additionally lowered the pressure 70 cm downstream to 10-5 torr. The new residual pressure allows operation of JENSA with planned expansion of a recoil mass separator SECAR.

18. A Small Number of Residues Can Determine if Linker Histones Are Bound On or Off Dyad in the Chromatosome.

Science.gov (United States)

Zhou, Bing-Rui; Feng, Hanqiao; Ghirlando, Rodolfo; Li, Shipeng; Schwieters, Charles D; Bai, Yawen

2016-10-09

19. Attaching Meaning to the Number Words: Contributions of the Object Tracking and Approximate Number Systems

Science.gov (United States)

vanMarle, Kristy; Chu, Felicia W.; Mou, Yi; Seok, Jin H.; Rouder, Jeffrey; Geary, David C.

2018-01-01

Children's understanding of the quantities represented by number words (i.e., cardinality) is a surprisingly protracted but foundational step in their learning of formal mathematics. The development of cardinal knowledge is related to one or two core, inherent systems--the approximate number system (ANS) and the object tracking system (OTS)--but…

20. System Study: Residual Heat Removal 1998-2014

Energy Technology Data Exchange (ETDEWEB)

Schroeder, John Alton [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-12-01

This report presents an unreliability evaluation of the residual heat removal (RHR) system in two modes of operation (low-pressure injection in response to a large loss-of-coolant accident and post-trip shutdown-cooling) at 104 U.S. commercial nuclear power plants. Demand, run hours, and failure data from fiscal year 1998 through 2014 for selected components were obtained from the Institute of Nuclear Power Operations (INPO) Consolidated Events Database (ICES). The unreliability results are trended for the most recent 10 year period, while yearly estimates for system unreliability are provided for the entire active period. No statistically significant increasing trends were identified in the RHR results. A highly statistically significant decreasing trend was observed for the RHR injection mode start-only unreliability. Statistically significant decreasing trends were observed for RHR shutdown cooling mode start-only unreliability and RHR shutdown cooling model 24-hour unreliability.

1. Detection of Chern numbers and entanglement in topological multi-component systems through subsystem winding numbers

NARCIS (Netherlands)

J. Lisle, de; De, S.; Alba, E.; Bullivant, A.; Garcia-Ripoll, J.J.; Lahtinen, V.; Pachos, J.K.

2014-01-01

Topological invariants, such as the Chern number, characterize topological phases of matter. Here we provide a method to detect Chern numbers in systems with two distinct species of fermion, such as spins, orbitals or several atomic states. We analytically show that the Chern number can be

2. Attaching meaning to the number words: contributions of the object tracking and approximate number systems

OpenAIRE

vanMarle, K; Chu, FW; Mou, Y; Seok, JH; Rouder, J; Geary, DC

2018-01-01

Children's understanding of the quantities represented by number words (i.e., cardinality) is a surprisingly protracted but foundational step in their learning of formal mathematics. The development of cardinal knowledge is related to one or two core, inherent systems - the approximate number system (ANS) and the object tracking system (OTS) - but whether these systems act alone, in concert, or antagonistically is debated. Longitudinal assessments of 198 preschool children on OTS, ANS, and ca...

3. Strictly-regular number system and data structures

DEFF Research Database (Denmark)

Elmasry, Amr Ahmed Abd Elmoneim; Jensen, Claus; Katajainen, Jyrki

2010-01-01

We introduce a new number system that we call the strictly-regular system, which efficiently supports the operations: digit-increment, digit-decrement, cut, concatenate, and add. Compared to other number systems, the strictly-regular system has distinguishable properties. It is superior to the re...

4. Financial cost-benefit analysis of investment possibilities in district heating system on wood residues

Directory of Open Access Journals (Sweden)

Stošić Ivan

2017-01-01

Full Text Available The purpose of this research is to provide feasibility analysis of a long-term sustainable development concept for district heating based on wood residues. In this paper, the experimental study has been conducted starting from the data collected by field researches in municipality of Trstenik (town in Serbia with district heating system currently based on heavy fuel oil and lignite. Using the method of Financial Cost-Benefit Analysis, this study evaluates financial efficiency of investment in district heating plant based on wood residues and energy savings in district heating system. Findings show that such investment could be profitable from the financial point of view: Net Present Value of investment is positive, Financial Rate of Return is high (30.69%, and the pay-back period is relatively favourable (7 years. Moreover, the presented SWOT indicates that there are realistic prospects of implementation of district heating based on wood residues. However, this does not mean everything will go smoothly and easily, keeping in mind a number of challenges that each new concept of district heating contains immanently. Nevertheless, the results of this research could provide useful inputs for the decision makers when selecting appropriate models for improving performance of municipal district heating systems.

5. Plant Residual Management in different Crop Rotations System on Potato Tuber Yield Loss Affected by Wireworms

Directory of Open Access Journals (Sweden)

2016-07-01

Full Text Available Introduction: Selection a proper crop rotation based on environmental conservation rules is a key factor for increasing long term productivity. On the other hand, the major problem in reaching agricultural sustainability is lack of soil organic matter. Recently, a new viewpoint has emerged based on efficient use of inputs, environmental protection, ecological economy, food supply and security. Crop rotation cannot supply and restore plant needed nutrients, so gradually the productivity of rotation system tends to be decreased. Returning the plant residues to the soil helps to increase its organic matter and fertility in long-term period. Wireworms are multi host pests and we can see them in wheat and barley too. The logic way for their control is agronomic practices like as crop rotation. Wireworms’ population and damages are increased with using grasses and small seed gramineas in mild winters, variation in cropping pattern, reduced chemical control, and cover crops in winter. In return soil cultivation, crop rotation, planting date, fertilizing, irrigation and field health are the examples for the effective factors in reducing wireworms’ damage. Materials and Methods: In order to study the effect of crop rotations, residue management and yield damage because of wireworms’ population in soil, this experiment was conducted using four rotation systems for five years in Jolgeh- Rokh agricultural research station. Crop rotations were included, 1 Wheat monoculture for the whole period (WWWWW, 2 Wheat- wheat- wheat- canola- wheat (WWWCW, 3 Wheat- sugar beet- wheat- potato- wheat (WSWPW, 4 Wheat- maize- wheat- potato- wheat (WMWPW as main plots and three levels of returning crop residues to soil (returning 0, 50 and 100% produced crop residues to soil were allocated as sub plots. This experiment was designed as split plot based on RCBD design with three replications. After ending each rotation treatment, the field was sowed with potato cv. Agria

6. Number of residual thermotolerant coliforms on plants and in soil when using reclaimed domestic wastewater for irrigation.

Science.gov (United States)

Khamkure, Sasirot; Cervantes, Edmundo Peña; Zermeño González, Alejandro; Cervantes, Rubén López; Melo, Prócoro Gamero; Ramírez, Homero

2013-01-01

The reclamation of domestic wastewater for irrigation is one alternative approach to solve the water scarcity crisis, but it is essential to control the microbiological quality of wastewater used for irrigation. The removal of thermotolerant coliforms, also known as faecal coliforms (FC), from treated domestic wastewater by intermittent media infiltration (IMI) in column was studied. The columns were filled with natural filter media (soil, soil/charcoal and zinc-modified zeolite, Zeo-Zn), and wastewater, IMI-treated wastewater and disinfected wastewater were compared. The numbers of residual FC on Swiss chard (Beta vulgaris) and in agricultural soil were determined over a 4-month period. The column using Zeo-Zn had a higher FC removal efficiency (2.98 log) than columns with other filter media and disinfection (1.87-2.57 log) due to the bactericidal properties of Zn(2+). The treatment of wastewater using Zeo-Zn and disinfection both decreased the accumulation of FC on plants and in soil to approximately 1-20 MPN/g dry matter. IMI-treated wastewater using the column with Zeo-Zn was suitable for unrestricted agricultural use, complied with Mexican regulations (as did disinfected wastewater) and had a low risk of FC contamination of plants and soil.

7. A Chain Perspective on Large-scale Number Systems

NARCIS (Netherlands)

Grijpink, J.H.A.M.

2012-01-01

As large-scale number systems gain significance in social and economic life (electronic communication, remote electronic authentication), the correct functioning and the integrity of public number systems take on crucial importance. They are needed to uniquely indicate people, objects or phenomena

8. Calcium and Magnesium Released from Residues in an Integrated Crop-Livestock System under Different Grazing Intensities

Directory of Open Access Journals (Sweden)

Joice Mari Assmann

Full Text Available ABSTRACT Under integrated crop-livestock production systems (ICLS, plant and animal residues are important nutrient stocks for plant growth. Grazing management, by affecting the numbers of both plants and animals and the quality of residues, will influence nutrient release rates. The objective of this study was to evaluate the impact of grazing intensity on Ca and Mg release from pasture, dung, and soybean residues in a long-term no-till integrated soybean-cattle system. The experiment was established in May 2001 in a Latossolo Vermelho Distroférrico (Rhodic Hapludox. Treatments were a gradient of grazing intensity, determined by managing a black oat + Italian ryegrass pasture at 10, 20, 30, and 40 cm grazing height and no-grazing (NG, followed by soybean cropping. Ca and Mg release rates were determined in two entire cycles (2009/11. Moderate grazing (20 and 30 cm sward height led to greater Ca and Mg release rates from pasture and dung residues, with low average half-life values (13 and 3 days for Ca and 16 and 6 days for Mg for pasture and dung, respectively. Grazing compared with NG resulted in greater Ca and Mg release from pasture and dung residues. Grazing intensity did not affect Ca and Mg release rates or amounts from soybean residues, but Ca and Mg release rates were greater from soybean leaves than from stems. Although moderate grazing intensities produce higher quality residues and higher calcium and magnesium release rates, a higher total nutrient amount is released by light grazing intensity and no-grazing, determined by higher residue production. Grazing intensity is, then, important for nutrient dynamics in the soil-plant-animal continuum.

9. Assessment of procurement systems for unutilized logging residues ...

African Journals Online (AJOL)

The results showed that coarse logging residues can be available as firewood in traditional utilization manner, but a thin material is left in the forest because of high collection and extraction costs. However, it was found that the increasing demand for forest biomass as a bioenergy resource encouraged the use of logging ...

10. Investigation of passive residual heat removal system for VVERs: Effects of finned type heat exchanger tubes

International Nuclear Information System (INIS)

Ayhan, Hüseyin; Sökmen, Cemal Niyazi

2016-01-01

Highlights: • Performance of passive residual heat removal system (PRHRS) of VVER type nuclear power plants is investigated. • Unit heat exchanger of PRHRS is designed to reject 4 MW heat amount from reactor via steam generator. • This study shows that decay heat can be rejected by 16 heat exchangers of PRHRS without any operator actions. - Abstract: After nuclear reactor shutdown, decay heat generation continues in the reactor core and it has the possibility to cause a severe accident. This residual heat has to be removed from the core sufficiently. In Water-Water Energetic Reactors (WWER) or VVERs, passive residual heat removal system is designed to remove decay heat after reactor shutdown. This system does not need any power operation, since ambient air is used as the cooling fluid in heat exchanger. The steam that is generated in the steam generators due to the heat released in the reactor core condenses and rejects its heat to the ambient air within this heat exchanger. The condensed liquid is returned back to the steam generator. The motion of the cooling medium occurs due to natural circulation. In the presented study, the original geometric design of passive residual heat removal system of VVER type nuclear power plants is introduced. The performance of this system is investigated. In the previous study, geometric design parameters for this system was determined for plain tubes of heat exchanger. Heat exchanger tubes were positioned as a helical in the previous study. With the knowledge of enhancing heat transfer using finned surfaces, geometrical design is modified in presented study. Circular type fin structures (having rectangular cross-section) are added to the outer surface of heat exchanger tubes. In the present heat exchanger model, tubes are positioned as a staggered bank. As the fin parameters, fin thickness, fin radius and total fin number are investigated in this study. Results are compared with the one obtained with plane tube (in tube

11. 41 CFR 101-1.109 - Numbering in FPMR System.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Numbering in FPMR System. 101-1.109 Section 101-1.109 Public Contracts and Property Management Federal Property Management Regulations System FEDERAL PROPERTY MANAGEMENT REGULATIONS GENERAL 1-INTRODUCTION 1.1-Regulation System § 101...

12. 41 CFR 115-1.109 - Numbering in FPMR system.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Numbering in FPMR system. 115-1.109 Section 115-1.109 Public Contracts and Property Management Federal Property Management Regulations System (Continued) ENVIRONMENTAL PROTECTION AGENCY 1-INTRODUCTION 1.1-Regulation System § 115-1...

13. Determination of crop residues and the physical and mechanical properties of soil in different tillage systems

Directory of Open Access Journals (Sweden)

2016-04-01

Full Text Available Introduction: Monitoring and management of soil quality is crucial for sustaining soil function in ecosystem. Tillage is one of the management operations that drastically affect soil physical quality. Conservation tillage methods are one of the efficient solutions in agriculture to reduce the soil erosion, air pollution, energy consumption, and the costs, if there is a proper management on the crop residues. One of the serious problems in agriculture is soil erosion which is rapidly increased in the recent decades as the intensity of tillage increases. This phenomenon occurs more in sloping lands or in the fields which are lacking from crop residues and organic materials. The conservation tillage has an important role in minimizing soil erosion and developing the quality of soil. Hence, it has attracted the attention of more researchers and farmers in the recent years. Materials and Methods: In this study, the effect of different tillage methods has been investigated on the crop residues, mechanical resistance of soil, and the stability of aggregates. This research was performed on the agricultural fields of Urmia University, located in Nazloo zone in 2012. Wheat and barley were planted in these fields, consecutively. The soil texture of these fields was loamy clay and the factorial experiments were done in a completely randomized block design. In this study, effect of three tillage systems including tillage with moldboard (conventional tillage, tillage with disk plow (reduced tillage, chisel plow (minimum tillage and control treatment on some soil physical properties was investigated. Depth is second factor that was investigated in three levels including 0-60, 60-140, and 140-200 mm. Moreover, the effect of different percentages of crop residues on the rolling resistance of non-driving wheels was studied in a soil bin. The contents of crop residues have been measured by using the linear transects and image processing methods. In the linear

14. Suitability of the charm HVS and a microbiological multiplate system for detection of residues in raw milk at EU maximum residue levels

NARCIS (Netherlands)

Nouws, J.F.M.; Egmond, van H.; Loeffen, G.; Schouten, J.; Keukens, H.; Smulders, I.; Stegeman, H.

1999-01-01

In this paper we assessed the suitability of the Charm HVS and a newly developed microbiological multiplate system as post-screening tests to confirm the presence of residues in raw milk at or near the maximum permissible residue level (MRL). The multiplate system is composed of Bacillus

15. New Strategies for Teaching Properties of Number Systems

Science.gov (United States)

Creswell, John L.; Wiscamb, Margaret

1970-01-01

Presents techniques and materials for instruction at secondary school and upper elementary grades in mathematical concepts of number systems structure. Grouping is used as a simple algebraic system to illustrate structure. Closure, inverse, identity, commutative and associative properties are examines relative to manipulation of geometric figureS.…

16. The number processing and calculation system: evidence from cognitive neuropsychology.

Science.gov (United States)

Salguero-Alcañiz, M P; Alameda-Bailén, J R

2015-04-01

Cognitive neuropsychology focuses on the concepts of dissociation and double dissociation. The performance of number processing and calculation tasks by patients with acquired brain injury can be used to characterise the way in which the healthy cognitive system manipulates number symbols and quantities. The objective of this study is to determine the components of the numerical processing and calculation system. Participants consisted of 6 patients with acquired brain injuries in different cerebral localisations. We used Batería de evaluación del procesamiento numérico y el cálculo, a battery assessing number processing and calculation. Data was analysed using the difference in proportions test. Quantitative numerical knowledge is independent from number transcoding, qualitative numerical knowledge, and calculation. Recodification is independent from qualitative numerical knowledge and calculation. Quantitative numerical knowledge and calculation are also independent functions. The number processing and calculation system comprises at least 4 components that operate independently: quantitative numerical knowledge, number transcoding, qualitative numerical knowledge, and calculation. Therefore, each one may be damaged selectively without affecting the functioning of another. According to the main models of number processing and calculation, each component has different characteristics and cerebral localisations. Copyright © 2013 Sociedad Española de Neurología. Published by Elsevier Espana. All rights reserved.

17. Residue-based Coordinated Selection and Parameter Design of Multiple Power System Stabilizers (PSSs)

DEFF Research Database (Denmark)

Su, Chi; Hu, Weihao; Fang, Jiakun

2013-01-01

Residue method is a commonly used approach to design the parameters of a power system stabilizer (PSS). In this paper, a residue identification method is adopted to obtain the system residues for different input-output pairs, using the system identification toolbox in MATLAB with the measurement...... as the test system is built in DIgSIELNT PowerFactory 14.0, in which the proposed coordination method is validated by time domain simulations and modal analysis....... data from time domain simulations. Then a coordinated approach for multiple PSS selection and parameter design based on residue method is proposed and realized in MATLAB m-files. Particle swarm optimization (PSO) is adopted in the coordination process. The IEEE 39-bus New England system model...

18. Towards Formulation of a Complex Binary Number System

Directory of Open Access Journals (Sweden)

Tariq Jamil

2002-06-01

Full Text Available For years complex numbers have been treated as distant relatives of real numbers despite their widespread applications in the fields of electrical and computer engineering. These days computer operations involving complex numbers are most commonly performed by applying divide-and-conquer technique whereby each complex number is separated into its real and imaginary parts, operations are carried out on each group of real and imaginary components, and then the final result of the operation is obtained by accumulating the individual results of the real and imaginary components. This technique forsakes the advantages of using complex numbers in computer arithmetic and there exists a need, at least for some problems, to treat a complex number as one unit and to carry out all operations in this form. In this paper, we have analyzed and proposed a (–1–j-base binary number system for complex numbers. We have discussed the arithmetic operations of two such binary numbers and outlined work which is currently underway in this area of computer arithmetic.

19. Automatic Number Plate Recognition System for IPhone Devices

Directory of Open Access Journals (Sweden)

Călin Enăchescu

2013-06-01

Full Text Available This paper presents a system for automatic number plate recognition, implemented for devices running the iOS operating system. The methods used for number plate recognition are based on existing methods, but optimized for devices with low hardware resources. To solve the task of automatic number plate recognition we have divided it into the following subtasks: image acquisition, localization of the number plate position on the image and character detection. The first subtask is performed by the camera of an iPhone, the second one is done using image pre-processing methods and template matching. For the character recognition we are using a feed-forward artificial neural network. Each of these methods is presented along with its results.

20. A novel simplified numbering system for dental burs

Directory of Open Access Journals (Sweden)

Hemamalathi Senthil

2008-01-01

Full Text Available A universally accepted standardization is of great value for any material or equipment that is used globally. A single number or name should represent the particular material or instrument throughout the world. Since the dental burs are used worldwide, a single standard numbering system, which gives a unique specification for each bur in any part of the world, is mandatory. Though the existing systems have tried to attain this goal, they have their own advantages and limitations that are explained in detail in this article. So, the idea of proposing a novel system is to formulate a simple way of mentioning each bur with its dimension and composition without the need for memorizing the numbers.

1. Unique Fiber Optic Sensor System for Residual Stress Measurement on Graphite Composites

National Research Council Canada - National Science Library

Bullock, D

1995-01-01

.... Measurement of this strain through the thickness of a composite is not a trivial task. Foster-Miller has developed the basis for a residual strain measurement system utilizing embedded fiber optic Bragg grating technology...

2. The redshift number density evolution of Mg II absorption systems

International Nuclear Information System (INIS)

Chen Zhi-Fu

2013-01-01

We make use of the recent large sample of 17 042 Mg II absorption systems from Quider et al. to analyze the evolution of the redshift number density. Regardless of the strength of the absorption line, we find that the evolution of the redshift number density can be clearly distinguished into three different phases. In the intermediate redshift epoch (0.6 ≲ z ≲ 1.6), the evolution of the redshift number density is consistent with the non-evolution curve, however, the non-evolution curve over-predicts the values of the redshift number density in the early (z ≲ 0.6) and late (z ≳ 1.6) epochs. Based on the invariant cross-section of the absorber, the lack of evolution in the redshift number density compared to the non-evolution curve implies the galaxy number density does not evolve during the middle epoch. The flat evolution of the redshift number density tends to correspond to a shallow evolution in the galaxy merger rate during the late epoch, and the steep decrease of the redshift number density might be ascribed to the small mass of halos during the early epoch.

3. Calculating residual flows through a multiple-inlet system: the conundrum of the tidal period

Science.gov (United States)

Duran-Matute, Matias; Gerkema, Theo

2015-11-01

The concept of residual, i.e., tidally-averaged, flows through a multiple inlet system is reappraised. The evaluation of the residual through-flow depends on the time interval over which is integrated, in other words, on how one defines the tidal period. It is demonstrated that this definition is ambiguous and that different definitions (based on, e.g., high waters, slack tides, etc.) yield very different results for the residual, also in terms of their long-term statistical properties (median and standard deviation). A basin-wide applicable method of defining the tidal period, in terms of enclosed water volume, is analyzed. We compare the different methods on the basis of high-resolution model results for the Western Dutch Wadden Sea. The multitude of tidal constituents together with wind variability creates broad distributions for the residuals, with standard deviations much larger than the mean or median residual flows.

4. Geodesics in hypercomplex number systems. Application to commutative quaternions

Energy Technology Data Exchange (ETDEWEB)

Catoni, Francesco; Zampetti, Paolo [ENEA, Centro Ricerche Casaccia, Rome (Italy). Dipt. Energia; Cannata, Roberto [ENEA, Centro Ricerche Casaccia, Rome (Italy). Funzione Centrale INFO; Bordoni, Luciana [ENEA, Centro Ricerche Casaccia, Rome (Italy). Funzione Centrale Studi

1997-10-01

The functions of hypercomplex variable can be related to the physical fields. Following the Einsteins ideas, by which the Theory of General Relativity was developed, they want to verify if a generalisation is possible, in order to described the motion of a body in a gravitational field, by the geodesics in spaces deformed by functional transformations of hypercomplex variables. These number systems introduce new space symmetries. This paper is just a first step in the more extended study. As a first application they consider the commutative quaternions system that may be considered as a composition of complex and hyperbolic numbers. By using in this system the same functional transformations valid for the two dimensional case, elliptical geodesics are obtained, with the eccentricity related to the angle between the orbit plane and a reference plane. These geodesics do not describe the Kepler orbits, but they show a space anisotropy that might be related to planet orbits of the solar system.

5. Geodesics in hypercomplex number systems. Application to commutative quaternions

International Nuclear Information System (INIS)

Catoni, Francesco; Zampetti, Paolo; Cannata, Roberto; Bordoni, Luciana

1997-10-01

The functions of hypercomplex variable can be related to the physical fields. Following the Einstein's ideas, by which the Theory of General Relativity was developed, they want to verify if a generalisation is possible, in order to described the motion of a body in a gravitational field, by the geodesics in spaces ''deformed'' by functional transformations of hypercomplex variables. These number systems introduce new space symmetries. This paper is just a first step in the more extended study. As a first application they consider the ''commutative quaternions'' system that may be considered as a composition of complex and hyperbolic numbers. By using in this system the same functional transformations valid for the two dimensional case, elliptical geodesics are obtained, with the eccentricity related to the angle between the orbit plane and a reference plane. These geodesics do not describe the Kepler orbits, but they show a space anisotropy that might be related to planet orbits of the solar system

6. Z Number Based Fuzzy Inference System for Dynamic Plant Control

Directory of Open Access Journals (Sweden)

Rahib H. Abiyev

2016-01-01

Full Text Available Frequently the reliabilities of the linguistic values of the variables in the rule base are becoming important in the modeling of fuzzy systems. Taking into consideration the reliability degree of the fuzzy values of variables of the rules the design of inference mechanism acquires importance. For this purpose, Z number based fuzzy rules that include constraint and reliability degrees of information are constructed. Fuzzy rule interpolation is presented for designing of an inference engine of fuzzy rule-based system. The mathematical background of the fuzzy inference system based on interpolative mechanism is developed. Based on interpolative inference process Z number based fuzzy controller for control of dynamic plant has been designed. The transient response characteristic of designed controller is compared with the transient response characteristic of the conventional fuzzy controller. The obtained comparative results demonstrate the suitability of designed system in control of dynamic plants.

7. Auditory signal design for automatic number plate recognition system

NARCIS (Netherlands)

Heydra, C.G.; Jansen, R.J.; Van Egmond, R.

2014-01-01

This paper focuses on the design of an auditory signal for the Automatic Number Plate Recognition system of Dutch national police. The auditory signal is designed to alert police officers of suspicious cars in their proximity, communicating priority level and location of the suspicious car and

8. Dynamics of number systems computation with arbitrary precision

CERN Document Server

Kurka, Petr

2016-01-01

This book is a source of valuable and useful information on the topics of dynamics of number systems and scientific computation with arbitrary precision. It is addressed to scholars, scientists and engineers, and graduate students. The treatment is elementary and self-contained with relevance both for theory and applications. The basic prerequisite of the book is linear algebra and matrix calculus. .

9. A Residual Approach for Balanced Truncation Model Reduction (BTMR of Compartmental Systems

Directory of Open Access Journals (Sweden)

William La Cruz

2014-05-01

Full Text Available This paper presents a residual approach of the square root balanced truncation algorithm for model order reduction of continuous, linear and time-invariante compartmental systems. Specifically, the new approach uses a residual method to approximate the controllability and observability gramians, whose resolution is an essential step of the square root balanced truncation algorithm, that requires a great computational cost. Numerical experiences are included to highlight the efficacy of the proposed approach.

10. NES++: number system for encryption based privacy preserving speaker verification

Science.gov (United States)

Xu, Lei; Feng, Tao; Zhao, Xi; Shi, Weidong

2014-05-01

As speech based operation becomes a main hand-free interaction solution between human and mobile devices (i.e., smartphones, Google Glass), privacy preserving speaker verification receives much attention nowadays. Privacy preserving speaker verification can be achieved through many different ways, such as fuzzy vault and encryption. Encryption based solutions are promising as cryptography is based on solid mathematic foundations and the security properties can be easily analyzed in a well established framework. Most current asymmetric encryption schemes work on finite algebraic structures, such as finite group and finite fields. However, the encryption scheme for privacy preserving speaker verification must handle floating point numbers. This gap must be filled to make the overall scheme practical. In this paper, we propose a number system that meets the requirements of both speaker verification and the encryption scheme used in the process. It also supports addition homomorphic property of Pailliers encryption, which is crucial for privacy preserving speaker verification. As asymmetric encryption is expensive, we propose a method of packing several numbers into one plain-text and the computation overhead is greatly reduced. To evaluate the performance of this method, we implement Pailliers encryption scheme over proposed number system and the packing technique. Our findings show that the proposed solution can fulfill the gap between speaker verification and encryption scheme very well, and the packing technique improves the overall performance. Furthermore, our solution is a building block of encryption based privacy preserving speaker verification, the privacy protection and accuracy rate are not affected.

11. Brain systems involved in arithmetic with positive versus negative numbers.

Science.gov (United States)

Gullick, Margaret M; Wolford, George

2014-02-01

Positive number arithmetic is based on combining and separating sets of items, with systematic differences in brain activity in specific regions depending on operation. In contrast, arithmetic with negative numbers involves manipulating abstract values worth less than zero, possibly involving different operation-activity relationships in these regions. Use of procedural arithmetic knowledge, including transformative rules like "minus a negative is plus a positive," may also differ by operand sign. Here, we examined whether the activity evoked in negative number arithmetic was similar to that seen in positive problems, using region of interest analyses (ROIs) to examine a specific set of brain regions. Negative-operand problems demonstrated a positive-like effect of operation in the inferior parietal lobule with more activity for subtraction than addition, as well as increased activity across operation. Interestingly, while positive-operand problems demonstrated the expected addition > subtraction activity difference in the angular gyrus, negative problems showed a reversed effect, with relatively more activity for subtraction than addition. Negative subtraction problems may be understood after translation to addition via rule, thereby invoking more addition-like activity. Whole-brain analyses showed increased right caudate activity for negative-operand problems across operation, indicating a possible overall increase in usage of procedural rules. Arithmetic with negative numbers may thus shows some operation-activity relationships similar to positive numbers, but may also be affected by strategy. This study examines the flexibility of the mental number system by exploring to what degree the processing of an applied usage of a difficult, abstract mathematical concept is similar to that for positive numbers. Copyright © 2012 Wiley Periodicals, Inc.

12. On the moment system and a flexible Prandtl number

Science.gov (United States)

2014-02-01

The Maxwell-Boltzmann moment system can be seen as a particular case of a mathematically more general moment system proposed by Machado.1 These last moments, of which a suggested continuous distribution and an integral generating form are presented here for some orders, are used in this paper to theoretically show (one of) their usefulness: A flexible Prandtl number can be obtained in both the Boltzmann equation and in the lattice Boltzmann equation with a conventional single relaxation time Bhatnagar-Gross-Krook (BGK) collision model.

13. Cellular bases of radiation-induced residual insufficiency in the haematopoietic system

International Nuclear Information System (INIS)

Wangenheim, K.H. v.; Peterson, H.P.; Feinendegen, L.E.

1984-01-01

Following radiation exposure, man's survival and further well-being largely depends on the degree of damage to his heamatopietic system. Stem cells are particualarly sensitive to radiation. Over and beyond acute radiation damge, residual radiation damage is of significance since it reduces the performance of the haematopietic system and enhances the risk of leukaemia. Knowledge concerning cellular bases may be important for preventive and therapeutic measures. The measurement method presented is based on the fact that stem cells from transfused bone marrow will settle in the spleen of highly irradiated mice and be able to reconstruct the haematopietic system. Initally individual colonies can be observed which originate from a single stem cell and the proliferation of its descendants. Counting these colonies will give the number of stem cells. The reduction of the proliferation factor measured in the stem-cell quality test apparently is not due to a shift in the age structure of the stem cell compartment but to a damage which is located within a more or less substantial proportion of the stem cells themselves. This damage is the cause of stem cell descendant growth retarded on an average. It is probable that recovery observed after irradiation is brought about by less-damaged or undamaged stem cells replacing damaged ones. Initial results point to the fact that this replacement can be influenced by treatment after irradiation. (orig./MG) [de

14. Construction of a risk assessment system for chemical residues in agricultural products.

Science.gov (United States)

Choi, Shinai; Hong, Jiyeon; Lee, Dayeon; Paik, Minkyoung

2014-01-01

Continuous monitoring of chemical residues in agricultural and food products has been performed by various government bodies in South Korea. These bodies have made attempts to systematically manage this information by creating a monitoring database system as well as a system based on these data with which to assess the health risk of chemical residues in agricultural products. Meanwhile, a database system is being constructed consisting of information about monitoring and, following this, a demand for convenience has led to the need for an evaluation tool to be constructed with the data processing system. Also, in order to create a systematic and effective tool for the risk assessment of chemical residues in foods and agricultural products, various evaluation models are being developed, both domestically and abroad. Overseas, systems such as Dietary Exposure Evaluation Model: Food Commodity Intake Database and Cumulative and Aggregate Risk Evaluation System are being used; these use the US Environmental Protection Agency as a focus, while the EU has developed Pesticide Residue Intake Model for assessments of pesticide exposure through food intake. Following this, the National Academy of Agricultural Science (NAAS) created the Agricultural Products Risk Assessment System (APRAS) which supports the use and storage of monitoring information and risk assessments. APRAS efficiently manages the monitoring data produced by NAAS and creates an extraction feature included in the database system. Also, the database system in APRAS consists of a monitoring database system held by the NAAS and food consumption database system. Food consumption data is based on Korea National Health and Nutrition Examination Survey. This system is aimed at exposure and risk assessments for chemical residues in agricultural products with regards to different exposure scenarios.

15. Dynamic Systems with a Finite Degrees of Freedom Number

Directory of Open Access Journals (Sweden)

2014-06-01

Full Text Available Taking as a starting point the law of conservation of the total energy of the system, and introducing two basic state functions - the Lagrangian and the Rayleigh function, the general form of the equation of motion for any dynamic system with a finite number of degrees of freedom is derived. The theory is illustrated by considering the rotating - type electromechanical energy converter with six degrees of freedom being the model of all essentially important types of DC and AC machines, including rotating power amplifiers, induction - and synchronous type motors - all of them discussed from both, the steady-state and the transient point of view. In the next part of the paper there is described a simple electric circuit with its model characterized by the holonomic constraints of the velocity-type. Finally, there is presented the kinematics and dynamics of the interesting mechanical system - the gyroscope placed on the rotating Earth.

16. A method to evaluate residual phase error for polar formatted synthetic aperture radar systems

Science.gov (United States)

Musgrove, Cameron; Naething, Richard

2013-05-01

Synthetic aperture radar systems that use the polar format algorithm are subject to a focused scene size limit inherent to the polar format algorithm. The classic focused scene size limit is determined from the dominant residual range phase error term. Given the many sources of phase error in a synthetic aperture radar, a system designer is interested in how much phase error results from the assumptions made with the polar format algorithm. Autofocus algorithms have limits to the amount and type of phase error that can be corrected. Current methods correct only one or a few terms of the residual phase error. A system designer needs to be able to evaluate the contribution of the residual or uncorrected phase error terms to determine the new focused scene size limit. This paper describes a method to estimate the complete residual phase error, not just one or a few of the dominant residual terms. This method is demonstrated with polar format image formation, but is equally applicable to other image formation algorithms. A benefit for the system designer is that additional correction terms can be added or deleted from the analysis as necessary to evaluate the resulting effect upon image quality.

17. Residual tree damage during selection cuts using two skidding systems in the Missouri Ozarks

Science.gov (United States)

Robert L. Ficklin; John P. Dwyer; Bruce E. Cutter; Tom Draper

1997-01-01

Today, there is an interest in using alternative silvicultural systems like selection and two-aged management, because the public finds these systems more acceptable than clearcutting. However, repeated entries into forest stands to remove timber increase the risk of residual stand damage. Harvest techniques are desirable that (1) reduce the risk of stand damage and (2...

18. 78 FR 6732 - Changes to Standard Numbering System, Vessel Identification System, and Boating Accident Report...

Science.gov (United States)

2013-01-31

... SECURITY Coast Guard 33 CFR Parts 173, 174, 181, and 187 RIN 1625-AB45 Changes to Standard Numbering System, Vessel Identification System, and Boating Accident Report Database AGENCY: Coast Guard, DHS. ACTION: Rule... Numbering System, Vessel Identification System, and Boating Accident Report Database rule became effective...

19. On the Number of Mather Measures of Lagrangian Systems

Science.gov (United States)

Bernard, Patrick

2010-09-01

In 1996, Ricardo Ricardo Mañé discovered that Mather measures are in fact the minimizers of a “universal” infinite dimensional linear programming problem. This fundamental result has many applications, of which one of the most important is to the estimates of the generic number of Mather measures. Mañé obtained the first estimation of that sort by using finite dimensional approximations. Recently, we were able, with Gonzalo Contreras, to use this method of finite dimensional approximation in order to solve a conjecture of John Mather concerning the generic number of Mather measures for families of Lagrangian systems. In the present paper we obtain finer results in that direction by applying directly some classical tools of convex analysis to the infinite dimensional problem. We use a notion of countably rectifiable sets of finite codimension in Banach (and Frechet) spaces which may deserve independent interest.

20. Residual generation with unknown input observer for linear systems in the presence of unmatched uncertainties

International Nuclear Information System (INIS)

2014-01-01

In this paper, we deal with residual vector generation for fault detection problems in linear systems via unknown input observer (UIO) when the so-called observer matching condition is not satisfied. Based on the relative degree between unknown input and output, a vector of the auxiliary output is introduced so that the observer matching condition is satisfied with respect to the vector. Auxiliary outputs are related to the derivatives of measured signals. However, differentiation leads to excessive amplification of measurement noise. A dynamically equivalent configuration of linear systems is developed using successive integrations to avoid differentiation. As such, auxiliary outputs are constructed without differentiation. Then, the equivalent dynamic system and its corresponding auxiliary outputs are used to generate the residual vector via an exponentially converging UIO. Fault detection in the generated residual vector is also investigated. Finally, the effectiveness of the proposed method is shown via numerical simulation.

1. Choice of harmonic number for the ISABELLE accelerating rf system

International Nuclear Information System (INIS)

Pedersen, F.

1977-01-01

Originally, h = 2 was chosen for the accelerating rf system to avoid growth of coupled bunch mode longitudinal instabilities. The ability to operate ISABELLE in a bunched mode and maintaining six interaction points plus the compatibility with the boxcar transfer scheme suggested for transfer from an eventual future accumulator ring has made it desirable to choose a different harmonic number, namely h = 3. It is shown in the following that the impedance threshold for these instabilities is higher than the impedance limit required during stacking to obtain design performance. The threshold is independent of the harmonic number, so the choice of h is free from an instability point of view, as long as we are below this threshold. For h = 3, the required peak voltage to produce the same acceptance and acceleration rate as the h = 2 system is 35 kV compared to 30 kV for the h = 2 system. The total stored energy in the h = 3 cavities will be less than in h = 2 cavities, so the cost is roughly unchanged. For the above mentioned reasons it is strongly recommended to choose h = 3

2. Thermal Hydraulic Analysis of a Passive Residual Heat Removal System for an Integral Pressurized Water Reactor

Directory of Open Access Journals (Sweden)

Junli Gou

2009-01-01

Full Text Available A theoretical investigation on the thermal hydraulic characteristics of a new type of passive residual heat removal system (PRHRS, which is connected to the reactor coolant system via the secondary side of the steam generator, for an integral pressurized water reactor is presented in this paper. Three-interknited natural circulation loops are adopted by this PRHRS to remove the residual heat of the reactor core after a reactor trip. Based on the one-dimensional model and a simulation code (SCPRHRS, the transient behaviors of the PRHRS as well as the effects of the height difference between the steam generator and the heat exchanger and the heat transfer area of the heat exchanger are studied in detail. Through the calculation analysis, it is found that the calculated parameter variation trends are reasonable. The higher height difference between the steam generator and the residual heat exchanger and the larger heat transfer area of the residual heat exchanger are favorable to the passive residual heat removal system.

3. Crop residues as raw materials for biorefinery systems - A LCA case study

International Nuclear Information System (INIS)

Cherubini, Francesco; Ulgiati, Sergio

2010-01-01

Our strong dependence on fossil fuels results from the intensive use and consumption of petroleum derivatives which, combined with diminishing oil resources, causes environmental and political concerns. The utilization of agricultural residues as raw materials in a biorefinery is a promising alternative to fossil resources for production of energy carriers and chemicals, thus mitigating climate change and enhancing energy security. This paper focuses on a biorefinery concept which produces bioethanol, bioenergy and biochemicals from two types of agricultural residues, corn stover and wheat straw. These biorefinery systems are investigated using a Life Cycle Assessment (LCA) approach, which takes into account all the input and output flows occurring along the production chain. This approach can be applied to almost all the other patterns that convert lignocellulosic residues into bioenergy and biochemicals. The analysis elaborates on land use change aspects, i.e. the effects of crop residue removal (like decrease in grain yields, change in soil N 2 O emissions and decrease of soil organic carbon). The biorefinery systems are compared with the respective fossil reference systems producing the same amount of products/services from fossils instead of biomass. Since climate change mitigation and energy security are the two most important driving forces for biorefinery development, the assessment focuses on greenhouse gas (GHG) emissions and cumulative primary energy demand, but other environmental categories are evaluated as well. Results show that the use of crop residues in a biorefinery saves GHG emissions and reduces fossil energy demand. For instance, GHG emissions are reduced by about 50% and more than 80% of non-renewable energy is saved. Land use change effects have a strong influence in the final GHG balance (about 50%), and their uncertainty is discussed in a sensitivity analysis. Concerning the investigation of the other impact categories, biorefinery systems

4. Arithmetic Training Does Not Improve Approximate Number System Acuity

Directory of Open Access Journals (Sweden)

Marcus Lindskog

2016-10-01

Full Text Available The Approximate Number System (ANS is thought to support non-symbolic representations of numerical magnitudes in humans. Recently much debate has focused on the causal direction for an observed relation between ANS acuity and arithmetic fluency. Here we investigate if arithmetic training can improve ANS acuity. We show with an experimental training study consisting of six 45-minute training sessions that although feedback during arithmetic training improves arithmetic performance substantially, it does not influence ANS acuity. Hence, we find no support for a causal link where symbolic arithmetic training influences the ANS acuity. Further, although short-term number memory is likely involved in arithmetic tasks we did not find that short-term memory capacity for numbers, measured by a digit-span test, was effected by arithmetic training. This suggests that the improvement in arithmetic fluency may have occurred independent of short-term memory efficiency, but rather due to long-term memory processes and/or mental calculation strategy development. The theoretical implications of these findings are discussed.

5. Arithmetic Training Does Not Improve Approximate Number System Acuity.

Science.gov (United States)

Lindskog, Marcus; Winman, Anders; Poom, Leo

2016-01-01

The approximate number system (ANS) is thought to support non-symbolic representations of numerical magnitudes in humans. Recently much debate has focused on the causal direction for an observed relation between ANS acuity and arithmetic fluency. Here we investigate if arithmetic training can improve ANS acuity. We show with an experimental training study consisting of six 45-min training sessions that although feedback during arithmetic training improves arithmetic performance substantially, it does not influence ANS acuity. Hence, we find no support for a causal link where symbolic arithmetic training influences ANS acuity. Further, although short-term number memory is likely involved in arithmetic tasks we did not find that short-term memory capacity for numbers, measured by a digit-span test, was effected by arithmetic training. This suggests that the improvement in arithmetic fluency may have occurred independent of short-term memory efficiency, but rather due to long-term memory processes and/or mental calculation strategy development. The theoretical implications of these findings are discussed.

6. The One-carbon Carrier Methylofuran from Methylobacterium extorquens AM1 Contains a Large Number of α- and γ-Linked Glutamic Acid Residues*

Science.gov (United States)

Hemmann, Jethro L.; Saurel, Olivier; Ochsner, Andrea M.; Stodden, Barbara K.; Kiefer, Patrick; Milon, Alain; Vorholt, Julia A.

2016-01-01

Methylobacterium extorquens AM1 uses dedicated cofactors for one-carbon unit conversion. Based on the sequence identities of enzymes and activity determinations, a methanofuran analog was proposed to be involved in formaldehyde oxidation in Alphaproteobacteria. Here, we report the structure of the cofactor, which we termed methylofuran. Using an in vitro enzyme assay and LC-MS, methylofuran was identified in cell extracts and further purified. From the exact mass and MS-MS fragmentation pattern, the structure of the cofactor was determined to consist of a polyglutamic acid side chain linked to a core structure similar to the one present in archaeal methanofuran variants. NMR analyses showed that the core structure contains a furan ring. However, instead of the tyramine moiety that is present in methanofuran cofactors, a tyrosine residue is present in methylofuran, which was further confirmed by MS through the incorporation of a 13C-labeled precursor. Methylofuran was present as a mixture of different species with varying numbers of glutamic acid residues in the side chain ranging from 12 to 24. Notably, the glutamic acid residues were not solely γ-linked, as is the case for all known methanofurans, but were identified by NMR as a mixture of α- and γ-linked amino acids. Considering the unusual peptide chain, the elucidation of the structure presented here sets the basis for further research on this cofactor, which is probably the largest cofactor known so far. PMID:26895963

7. Residual Mammographic Microcalcifications and Enhancing Lesions on MRI After Neoadjuvant Systemic Chemotherapy for Locally Advanced Breast Cancer: Correlation with Histopathologic Residual Tumor Size.

Science.gov (United States)

Kim, Young-Seon; Chang, Jung Min; Moon, Hyeong-Gon; Lee, Joongyub; Shin, Sung Ui; Moon, Woo Kyung

2016-04-01

To evaluate the accuracy of residual microcalcifications on mammogram (MG) in predicting the extent of the residual tumor after neoadjuvant systemic treatment (NST) in patients with locally advanced breast cancer and to evaluate factors affecting the accuracy of MG microcalcifications using magnetic resonance imaging (MRI) as a reference. The patients who underwent NST and showed suspicious microcalcifications on MG comprised our study population. Clinicopathologic and imaging (MG, MRI) findings were investigated. Agreement between image findings and pathology was assessed and factors affecting the discrepancy were analyzed. Among 207 patients, 196 had residual invasive ductal carcinoma or ductal carcinoma-in-situ (mean size, 3.78 cm). The overall agreement of residual microcalcifications on MG predicting residual tumor extents was lower than MRI in all tumor subtypes (intraclass correlation coefficient [ICC] = 0.368 and 0.723, p microcalcifications and pathology was highest in HR(+)/HER2(+) tumors and lowest in the triple-negative tumors (ICC = 0.417 and 0.205, respectively). Multivariate linear regression analysis revealed that a size discrepancy between microcalcifications and histopathology was correlated with molecular subtype (p = 0.005). In HR(+)/HER2(-) and triple-negative subtypes, the mean extents of residual microcalcification were smaller than residual cancer, and overestimation of tumor extent was more frequent in HR(+)/HER2(+) and HR(-)/HER2(+) tumors. The extent of microcalcifications on MG after NST showed an overall lower correlation with the extent of the pathologic residual tumor than enhancing lesions on MRI. The accuracy of residual tumor evaluation after NST with MG and MRI is affected by their molecular subtype.

8. Thermal treatment system of hazardous residuals in three heating zones based on a microprocessor

International Nuclear Information System (INIS)

Luna H, C.L.

1997-01-01

Thermal treatment system consists of a high power electric oven of three heating zones where each zone works up to 1200 Centigrades; it has the capacity of rising the central zone temperature up to 1000 Centigrades in 58 minutes approximately. This configuration of three zones could be programmed to different temperatures and they will be digitally controlled by a control microprocessor, which has been controlled by its own assembler language, in function of the PID control. There are also other important controls based on this microprocessor, as a signal amplification, starting and shutdown of high power step relays, activation and deactivation of both analogic/digital and digital/analogic convertors, port activation and basic data storage of the system. Two main characteristics were looked for this oven design; the first was the possibility of controlling the three zone temperature and the second was to reduce the rising and stabilization operation time and its digitized control. The principal function of the three zone oven is to accelerate the degradation of hazardous residuals by an oxidation instead combustion, through relatively high temperatures (minimum 800 Centigrades and maximum 1200 Centigrades); this process reduces the ash and volatile particulate production. The hazardous residuals will be pumped into the degradation system and after atomized through a packaged column; this step will avoid the direct contact of the residuals with the oven cores. These features make this system as closed process, which means that the residuals can not leak to the working area, reducing the exposure risk to the personnel. This three step oven system is the first stage of the complete hazardous residuals degradation system; after this, the flow will go into a cold plasma region where the process is completed, making a closed system. (Author)

9. 76 FR 51038 - Guidance for Industry on Residual Drug in Transdermal and Related Drug Delivery Systems...

Science.gov (United States)

2011-08-17

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-D-0246] Guidance for Industry on Residual Drug in Transdermal and Related Drug Delivery Systems; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and Drug Administration (FDA...

10. Aging assessment of Residual Heat Removal systems in Boiling Water Reactors

International Nuclear Information System (INIS)

Lofaro, R.J.; Aggarwal, S.

1992-01-01

The effects of aging on Residual Heat Removal systems in Boiling Water Reactors have been studied as part of the Nuclear Plant Aging Research Program. The aging phenomena has been characterized by analyzing operating experience from various national data bases. In addition, actual plant data was obtained to supplement and validate the data base findings

11. Design of A District Heating System Including The Upgrading of Residual Industrial Waste Heat

NARCIS (Netherlands)

Falcao, P.W.; Mesbah, A.; Suherman, M.V.; Wennekes, S.

2005-01-01

This study was aimed to evaluate the feasibility of using a waste heat stream from DSM for a District Heating System. A conceptual design was carried out with emphasis on the unit for upgrading the residual waste heat. Having reviewed heat pump technology, mechanical heat pump was found to be the

12. Financial performance of a mobile pyrolysis system used to produce biochar from sawmill residues

Science.gov (United States)

Dongyeob Kim; Nathaniel McLean Anderson; Woodam Chung

2015-01-01

Primary wood products manufacturers generate significant amounts of woody biomass residues that can be used as feedstocks for distributed-scale thermochemical conversion systems that produce valuable bioenergy and bioproducts. However, private investment in these technologies is driven primarily by financial performance, which is often unknown for new technologies with...

13. Unavailability of the residual system heat removal of Angra 1 by Bayesian networks considering dependent failures

International Nuclear Information System (INIS)

Gomes, Many R.S.; Melo, Paulo F.F.F. e

2015-01-01

This work models by Bayesian networks the residual heat removal system (SRCR) of Angra I nuclear power plant, using fault tree mapping for systematically identifying all possible modes of occurrence caused by a large loss of coolant accident (large LOCA). The focus is on dependent events, such as the bridge system structure of the residual heat removal system and the occurrence of common-cause failures. We used the Netica™ tool kit, Norsys Software Corporation and Python 2.7.5 for modeling Bayesian networks and Microsoft Excel for modeling fault trees. Working with dependent events using Bayesian networks is similar to the solutions proposed by other models, beyond simple understanding and ease of application and modification throughout the analysis. The results obtained for the unavailability of the system were satisfactory, showing that in most cases the system will be available to mitigate the effects of an accident as described above. (author)

14. The association between higher education and approximate number system acuity.

Science.gov (United States)

Lindskog, Marcus; Winman, Anders; Juslin, Peter

2014-01-01

Humans are equipped with an approximate number system (ANS) supporting non-symbolic numerosity representation. Studies indicate a relationship between ANS-precision (acuity) and math achievement. Whether the ANS is a prerequisite for learning mathematics or if mathematics education enhances the ANS remains an open question. We investigated the association between higher education and ANS acuity with university students majoring in subjects with varying amounts of mathematics (mathematics, business, and humanities), measured either early (First year) or late (Third year) in their studies. The results suggested a non-significant trend where students taking more mathematics had better ANS acuity and a significant improvement in ANS acuity as a function of study length that was mainly confined to the business students. The results provide partial support for the hypothesis that education in mathematics can enhance the ANS acuity.

15. The Association Between Higher Education and Approximate Number System Acuity

Directory of Open Access Journals (Sweden)

Marcus eLindskog

2014-05-01

Full Text Available Humans are equipped with an Approximate Number System (ANS supporting non-symbolic numerosity representation. Studies indicate a relationship between ANS-precision (acuity and math achievement. Whether the ANS is a prerequisite for learning mathematics or if mathematics education enhances the ANS remains an open question. We investigated the association between higher education and ANS acuity with university students majoring in subjects with varying amounts of mathematics (mathematics, business, and humanities, measured either early (1th year or late (3rd year in their studies. The results suggested a non-significant trend where students taking more mathematics had better ANS acuity and a significant improvement in ANS acuity as a function of study length that was mainly confined to the business students. The results provide partial support for the hypothesis that education in mathematics can enhance the ANS acuity.

16. 48 CFR 52.204-6 - Data Universal Numbering System (DUNS) Number.

Science.gov (United States)

2010-10-01

... business name. (ii) Tradestyle, doing business, or other name by which your entity is commonly recognized... started. (vii) Number of employees at your location. (viii) Chief executive officer/key manager. (ix) Line of business (industry). (x) Company Headquarters name and address (reporting relationship within your...

17. Significant Inter-Test Reliability Across Approximate Number System Assessments

Directory of Open Access Journals (Sweden)

Nicholas Kurshan Dewind

2016-03-01

Full Text Available The approximate number system (ANS is the hypothesized cognitive mechanism that allows adults, infants, and animals to enumerate large sets of items approximately. Researchers usually assess the ANS by having subjects compare two sets and indicate which is larger. Accuracy or Weber fraction is taken as an index of the acuity of the system. However, as Clayton et al., (2015 have highlighted, the stimulus parameters used when assessing the ANS vary widely. In particular, the numerical ratio between the pairs, and the way in which non-numerical features are varied often differ radically between studies. Recently, Clayton et al. (2015 found that accuracy measures derived from two commonly used stimulus sets are not significantly correlated. They argue that a lack of inter-test reliability threatens the validity of the ANS construct. Here we apply a recently developed modeling technique to the same data set. The model, by explicitly accounting for the effect of numerical ratio and non-numerical features, produces dependent measures that are less perturbed by stimulus protocol. Contrary to their conclusion we find a significant correlation in Weber fraction across the two stimulus sets. Nevertheless, in agreement with Clayton et al., we find that different protocols do indeed induce differences in numerical acuity and the degree of influence of non-numerical stimulus features. These findings highlight the need for a systematic investigation of how protocol idiosyncrasies affect ANS assessments.

18. Significant Inter-Test Reliability across Approximate Number System Assessments.

Science.gov (United States)

DeWind, Nicholas K; Brannon, Elizabeth M

2016-01-01

The approximate number system (ANS) is the hypothesized cognitive mechanism that allows adults, infants, and animals to enumerate large sets of items approximately. Researchers usually assess the ANS by having subjects compare two sets and indicate which is larger. Accuracy or Weber fraction is taken as an index of the acuity of the system. However, as Clayton et al. (2015) have highlighted, the stimulus parameters used when assessing the ANS vary widely. In particular, the numerical ratio between the pairs, and the way in which non-numerical features are varied often differ radically between studies. Recently, Clayton et al. (2015) found that accuracy measures derived from two commonly used stimulus sets are not significantly correlated. They argue that a lack of inter-test reliability threatens the validity of the ANS construct. Here we apply a recently developed modeling technique to the same data set. The model, by explicitly accounting for the effect of numerical ratio and non-numerical features, produces dependent measures that are less perturbed by stimulus protocol. Contrary to their conclusion we find a significant correlation in Weber fraction across the two stimulus sets. Nevertheless, in agreement with Clayton et al. (2015) we find that different protocols do indeed induce differences in numerical acuity and the degree of influence of non-numerical stimulus features. These findings highlight the need for a systematic investigation of how protocol idiosyncrasies affect ANS assessments.

19. Asymptotic Solutions of Time-Space Fractional Coupled Systems by Residual Power Series Method

Directory of Open Access Journals (Sweden)

Wenjin Li

2017-01-01

Full Text Available This paper focuses on the asymptotic solutions to time-space fractional coupled systems, where the fractional derivative and integral are described in the sense of Caputo derivative and Riemann-Liouville integral. We introduce the Residual Power Series (for short RPS method to construct the desired asymptotic solutions. Furthermore, we apply this method to some time-space fractional coupled systems. The simplicity and efficiency of RPS method are shown by the application.

20. Comparison of finishing and polishing systems for residual resin removal after debonding

Directory of Open Access Journals (Sweden)

Çaöry Ulusoy

2009-06-01

Full Text Available OBJECTIVE : The aim of this study was to evaluate (1 the effectiveness of one-step polishers on the surface morphology of enamel using scanning electron microscope (SEM and compare their effects with conventional systems for residual adhesive removal; and (2 the time spent to remove resin remnants. MATERIAL AND METHODS: Metal brackets were bonded to the buccal surface of 80 freshly extracted human premolar teeth and received the same resin-removal methods to evaluate the time spent to remove resin remnants (n=10. The brackets were debonded and residual adhesive was removed using different systems. Fourty-five premolars, including the control group with intact enamel (n=5, were examined by SEM. RESULTS: 30-blade tungsten carbide burs were the least time-consuming procedure. The best system in SEM study was the PoGo micro-polishers followed by Super-Snap Rainbow system. CONCLUSIONS: The effect of polishing systems on residual resin removal was dependent on the characteristics of the instruments in each system.

1. Calculation of residual electricity mixes when accounting for the EECS (European Electricity Certificate System) - The need for a harmonised system

International Nuclear Information System (INIS)

Raadal, H. L.; Nyland, C. A.; Hanssen, O. J.

2009-01-01

According to the Electricity Directive, suppliers of electricity must disclose their electricity portfolio with regards to energy source and environmental impact. This paper gives some examples of disclosure systems and residual electricity mixes in Norway, Sweden and Finland, compared to an approach based on a common regional disclosure. Disclosures based on the E-TRACK standard are presented, as well as the variation in CO 2 emissions from different residual mixes. The results from this study clearly show that there is a need for a harmonised, transparent and reliable system for the accounting of electricity disclosure in Europe. (author)

2. Training the approximate number system improves math proficiency.

Science.gov (United States)

Park, Joonkoo; Brannon, Elizabeth M

2013-10-01

Humans and nonhuman animals share an approximate number system (ANS) that permits estimation and rough calculation of quantities without symbols. Recent studies show a correlation between the acuity of the ANS and performance in symbolic math throughout development and into adulthood, which suggests that the ANS may serve as a cognitive foundation for the uniquely human capacity for symbolic math. Such a proposition leads to the untested prediction that training aimed at improving ANS performance will transfer to improvement in symbolic-math ability. In the two experiments reported here, we showed that ANS training on approximate addition and subtraction of arrays of dots selectively improved symbolic addition and subtraction. This finding strongly supports the hypothesis that complex math skills are fundamentally linked to rudimentary preverbal quantitative abilities and provides the first direct evidence that the ANS and symbolic math may be causally related. It also raises the possibility that interventions aimed at the ANS could benefit children and adults who struggle with math.

3. Entrance C - New Automatic Number Plate Recognition System

CERN Multimedia

2013-01-01

Entrance C (Satigny) is now equipped with a latest-generation Automatic Number Plate Recognition (ANPR) system and a fast-action road gate.   During the month of August, Entrance C will be continuously open from 7.00 a.m. to 7.00 p.m. (working days only). The security guards will open the gate as usual from 7.00 a.m. to 9.00 a.m. and from 5.00 p.m. to 7.00 p.m. For the rest of the working day (9.00 a.m. to 5.00 p.m.) the gate will operate automatically. Please observe the following points:       Stop at the STOP sign on the ground     Position yourself next to the card reader for optimal recognition     Motorcyclists must use their CERN card     Cyclists may not activate the gate and should use the bicycle turnstile     Keep a safe distance from the vehicle in front of you   If access is denied, please check that your vehicle regist...

4. Electrophysiological evidence for the involvement of the approximate number system in preschoolers' processing of spoken number words.

Science.gov (United States)

Pinhas, Michal; Donohue, Sarah E; Woldorff, Marty G; Brannon, Elizabeth M

2014-09-01

Little is known about the neural underpinnings of number word comprehension in young children. Here we investigated the neural processing of these words during the crucial developmental window in which children learn their meanings and asked whether such processing relies on the Approximate Number System. ERPs were recorded as 3- to 5-year-old children heard the words one, two, three, or six while looking at pictures of 1, 2, 3, or 6 objects. The auditory number word was incongruent with the number of visual objects on half the trials and congruent on the other half. Children's number word comprehension predicted their ERP incongruency effects. Specifically, children with the least number word knowledge did not show any ERP incongruency effects, whereas those with intermediate and high number word knowledge showed an enhanced, negative polarity incongruency response (N(inc)) over centroparietal sites from 200 to 500 msec after the number word onset. This negativity was followed by an enhanced, positive polarity incongruency effect (P(inc)) that emerged bilaterally over parietal sites at about 700 msec. Moreover, children with the most number word knowledge showed ratio dependence in the P(inc) (larger for greater compared with smaller numerical mismatches), a hallmark of the Approximate Number System. Importantly, a similar modulation of the P(inc) from 700 to 800 msec was found in children with intermediate number word knowledge. These results provide the first neural correlates of spoken number word comprehension in preschoolers and are consistent with the view that children map number words onto approximate number representations before they fully master the verbal count list.

5. Pesticide residue assessment in three selected agricultural production systems in the Choluteca River Basin of Honduras

International Nuclear Information System (INIS)

1999-01-01

There is a basic lack of information about the presence of pesticide residues in the environment in Central America. Over the period of February 1995 to June 1997, river, well, lagoon and spring water samples, as well as soil, fish tissue, lagoon bed sediments and some foodstuffs were taken from the greater Cholutecan River Basin of Honduras and analyzed for pesticide residues. These were collected at three separate sites (La Lima, Zamorano and Choluteca), each characterized by differing agricultural production systems. The main pesticide residues found in soil samples were dieldrin and p,p'-DDT, while river water samples were found to have detectable levels of heptachlor, endosulfan and chlorpyrifos, with lagoon and well water also being shown to contain heptachlor. These pesticides detected were in more than 20% of the samples assessed. In river water samples more pesticide residues at higher concentrations were found to be associated with areas of more intensive agricultural production. The fewest pesticides with lowest concentrations were found in the small subwatershed associated with traditional agricultural production. Although the pesticides found in the soils at the three sites were generally similar they tended to be higher in the southern part of the Cholutecan watershed, followed by the central zone, with the lowest concentrations being found in the more traditional production zone. In lagoon and well water samples more pesticides, but mostly in lower concentrations were detected at the traditional production site than at the others. Ten pesticide compounds were detected in fish tissue, mainly organochlorines, some of which were also found in lagoon sediments. In terms of food products, almost no pesticides were detected in vegetables, but the kidney adipose tissue taken from slaughtered cows was shown to have a tendency to contain some organochlorines. Spring water in the traditional agricultural production zone contained three organochlorine compounds

6. Vision-Inspection System for Residue Monitoring of Ready-Mixed Concrete Trucks

Directory of Open Access Journals (Sweden)

Deok-Seok Seo

2015-01-01

Full Text Available The objective of this study is to propose a vision-inspection system that improves the quality management for ready-mixed concrete (RMC. The proposed system can serve as an alternative to the current visual inspection method for the detection of residues in agitator drum of RMC truck. To propose the system, concept development and the system-level design should be executed. The design considerations of the system are derived from the hardware properties of RMC truck and the conditions of RMC factory, and then 6 major components of the system are selected in the stage of system level design. The prototype of system was applied to a real RMC plant and tested for verification of its utility and efficiency. It is expected that the proposed system can be employed as a practical means to increase the efficiency of quality management for RMC.

7. Hydrothermal carbonization of biomass residues: mass spectrometric characterization for ecological effects in the soil-plant system.

Science.gov (United States)

Jandl, Gerald; Eckhardt, Kai-Uwe; Bargmann, Inge; Kücke, Martin; Greef, Jörg-Michael; Knicker, Heike; Leinweber, Peter

2013-01-01

Hydrochars, technically manufactured by hydrothermal carbonization (HTC) of biomass residues, are recently tested in high numbers for their suitability as feedstock for bioenergy production, the bioproduct industry, and as long-term carbon storage in soil, but ecological effects in the soil-plant system are not sufficiently known. Therefore, we investigated the influence of different biomass residues and process duration on the molecular composition of hydrochars, and how hydrochar addition to soils affected the germination of spring barley ( L.) seeds. Samples from biomass residues and the corresponding hydrochars were analyzed by pyrolysis-field ionization mass spectrometry (Py-FIMS) and gaseous emissions from the germination experiments with different soil-hydrochar mixtures by gas chromatography/mass spectrometry (GC/MS). The molecular-level characterization of various hydrochars by Py-FIMS clearly showed that the kind of biomass residue influenced the chemical composition of the corresponding hydrochars more strongly than the process duration. In addition to various detected possible toxic substances, two independent mass spectrometric methods (Py-FIMS and GC/MS) indicated long C-chain aliphatic compounds which are typically degraded to the C-unit ethylene that can evoke phytotoxic effects in high concentrations. This showed for the first time possible chemical compounds to explain toxic effects of hydrochars on plant growth. It is concluded that the HTC process did not result in a consistent product with defined chemical composition. Furthermore, possible toxic effects urgently need to be investigated for each individual hydrochar to assess effects on the soil organic matter composition and the soil biota before hydrochar applications as an amendment on agricultural soils. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

8. Automatic Gamma-Scanning System for Measurement of Residual Heat in Spent Nuclear Fuel

International Nuclear Information System (INIS)

Osifo, Otasowie

2007-03-01

In Sweden, spent nuclear fuel will be encapsulated and placed in a deep geological repository. In this procedure, reliable and accurate spent fuel data such as discharge burnup, cooling time and residual heat must be available. The gamma scanning method was proposed in earlier work as a fast and reliable method for the experimental determination of such spent fuel data. This thesis is focused on the recent achievements in the development of a pilot gamma scanning system and its application in measuring spent fuel residual heat. The achievements include the development of dedicated spectroscopic data-acquisition and analysis software and the use of a specially designed calorimeter for calibrating the gamma scanning system. The pilot system is described, including an evaluation of the performance of the spectrum analysis software. Also described are the gamma-scanning measurements on 31 spent PWR fuel assemblies performed using the pilot system. The results obtained for the determination of residual heat are presented, showing an agreement of (2-3) % with both calorimetric and calculated data. In addition, the ability to verify declared data such as discharge burnup and cooling time is demonstrated

9. Soil and crop residue CO2-C emission under tillage systems in sugarcane-producing areas of southern Brazil

Directory of Open Access Journals (Sweden)

Luís Gustavo Teixeira

2013-10-01

Full Text Available Appropriate management of agricultural crop residues could result in increases on soil organic carbon (SOC and help to mitigate gas effect. To distinguish the contributions of SOC and sugarcane (Saccharum spp. residues to the short-term CO2-C loss, we studied the influence of several tillage systems: heavy offset disk harrow (HO, chisel plow (CP, rotary tiller (RT, and sugarcane mill tiller (SM in 2008, and CP, RT, SM, moldboard (MP, and subsoiler (SUB in 2009, with and without sugarcane residues relative to no-till (NT in the sugarcane producing region of Brazil. Soil CO2-C emissions were measured daily for two weeks after tillage using portable soil respiration systems. Daily CO2-C emissions declined after tillage regardless of tillage system. In 2008, total CO2-C from SOC and/or residue decomposition was greater for RT and lowest for CP. In 2009, emission was greatest for MP and CP with residues, and smallest for NT. SOC and residue contributed 47 % and 41 %, respectively, to total CO2-C emissions. Regarding the estimated emissions from sugarcane residue and SOC decomposition within the measurement period, CO2-C factor was similar to sugarcane residue and soil organic carbon decomposition, depending on the tillage system applied. Our approach may define new emission factors that are associated to tillage operations on bare or sugarcane-residue-covered soils to estimate the total carbon loss.

10. Systemic therapy with oncolytic myxoma virus cures established residual multiple myeloma in mice

Directory of Open Access Journals (Sweden)

Eric Bartee

2016-01-01

Full Text Available Multiple myeloma is an incurable malignancy of plasma B-cells. Traditional chemotherapeutic regimes often induce initial tumor regression; however, virtually all patients eventually succumb to relapse caused by either reintroduction of disease during autologous transplant or expansion of chemotherapy resistant minimal residual disease. It has been previously demonstrated that an oncolytic virus known as myxoma can completely prevent myeloma relapse caused by reintroduction of malignant cells during autologous transplant. The ability of this virus to treat established residual disease in vivo, however, remained unknown. Here we demonstrate that intravenous administration of myxoma virus into mice bearing disseminated myeloma results in the elimination of 70–90% of malignant cells within 24 hours. This rapid debulking was dependent on direct contact of myxoma virus with residual myeloma and did not occur through destruction of the hematopoietic bone marrow niche. Importantly, systemic myxoma therapy also induced potent antimyeloma CD8+ T cell responses which localized to the bone marrow and were capable of completely eradicating established myeloma in some animals. These results demonstrate that oncolytic myxoma virus is not only effective at preventing relapse caused by reinfusion of tumor cells during stem cell transplant, but is also potentially curative for patients bearing established minimal residual disease.

11. 75 FR 49869 - Changes to Standard Numbering System, Vessel Identification System, and Boating Accident Report...

Science.gov (United States)

2010-08-16

... SECURITY Coast Guard 33 CFR Parts 173, 174, 181, and 187 RIN 1625-AB45 Changes to Standard Numbering System, Vessel Identification System, and Boating Accident Report Database AGENCY: Coast Guard, DHS. ACTION..., Vessel Identification System, and Boating Accident Report Database. DATES: Comments and related material...

12. Tradeoffs in Crop Residue Utilization in Mixed Crop-Livestock Systems and Implications for Conservation Agriculture and Sustainable Land Management

OpenAIRE

Jaleta, Moti; Kassie, Menale; Shiferaw, Bekele A.

2012-01-01

Crop residue use for soil mulch and animal feed are the two major competing purposes and the basic source of fundamental challenge in conservation agriculture (CA) where residue retention on farm plots is one of the three CA principles. Using survey data from Kenya and applying bivariate ordered Probit and bivariate Tobit models, this paper analyzes the tradeoffs in maize residue use as soil mulch and livestock feed in mixed farming systems. Results show that both the proportion and quantity ...

13. Nuclear reactor equipped with a flooding tank and a residual heat removal and emergency cooling system

International Nuclear Information System (INIS)

Schabert, H.P.; Winkler, F.

1975-01-01

A description is given of a nuclear reactor such as a pressurized-water reactor or the like which is equipped with a flooding tank and a residual heat removal and emergency cooling system. The flooding tank is arranged within the containment shell at an elevation above the upper edge of the reactor core and contains a liquid for flooding the reactor core in the event of a loss of coolant

14. Failure Modes and Effects Analysis (FMEA) of the Residual Heat Removal System

International Nuclear Information System (INIS)

Eggleston, F.T.

1976-01-01

The Residual Heat Removal System (RHRS) transfer heat from the Reactor Coolant System (RCS) to the reactor plant Component Cooling System (CCS) to reduce the temperature of the RCS at a controlled rate during the second part of normal plant cooldown and maintains the desired temperature until the plant is restarted. By the use of an analytic tool, the Failure Modes and Effects Analysis, it is shown that the RHRS, because of its redundant two train design, is able to accommodate any credible component single failure with the only effect being an extension in the required cooldown time, thus demonstrating the reliability of the RHRS to perform its intended function

15. Energy Dependence of Measured CT Numbers on Substituted Materials Used for CT Number Calibration of Radiotherapy Treatment Planning Systems.

Directory of Open Access Journals (Sweden)

Reza Mahmoudi

Full Text Available For accurate dose calculations, it is necessary to provide a correct relationship between the CT numbers and electron density in radiotherapy treatment planning systems (TPSs. The purpose of this study was to investigate the energy dependence of measured CT numbers on substituted materials used for CT number calibration of radiotherapy TPSs and the resulting errors in the treatment planning calculation doses.In this study, we designed a cylindrical water phantom with different materials used as tissue equivalent materials for the simulation of tissues and obtaining the related CT numbers. For evaluating the effect of CT number variations of substituted materials due to energy changing of scanner (kVp on the dose calculation of TPS, the slices of the scanned phantom at three kVp's were imported into the desired TPSs (MIRS and CorePLAN. Dose calculations were performed on two TPSs.The mean absolute percentage differences between the CT numbers of CT scanner and two treatment planning systems for all the samples were 3.22%±2.57% for CorePLAN and 2.88%±2.11% for MIRS. It was also found that the maximum absolute percentage difference between all of the calculated doses from each photon beam of linac (6 and 15 MV at three kVp's was less than 1.2%.The present study revealed that, for the materials with effective low atomic number, the mean CT number increased with increasing energy, which was opposite for the materials with an effective high atomic number. We concluded that the tissue substitute materials had a different behavior in the energy ranges from 80 to 130 kVp. So, it is necessary to consider the energy dependence of the substitute materials used for the measurement or calibration of CT number for radiotherapy treatment planning systems.

16. Pesticide residues in apples grown under a conventional and integrated pest management system.

Science.gov (United States)

2009-06-01

This paper describes method validation for determination of more than 40 pesticides in apples using a GC technique. Target compounds belonged to the organochlorine, organophosphorus, carbamates, pyrethroids, triazoles, dicarboximides and strobilurins groups, among others. Sample preparation consisted of acetone extraction and subsequent cleanup/concentration by SPE with a polymer-based sorbent. Single quadrupole GC-MS operating in SIM mode and electron impact ionization was used for identification and quantification of the pesticides. Average recoveries for analytes ranged between 70 and 110% at three fortification levels - 0.01, 0.1 and 0.2 mg kg(-1). Relative standard deviations were lower than 20% for all tested compounds. Calculated limits of detection and limits of quantification were below 0.01 mg kg(-1), which were sufficiently low compared to the maximum residue levels (MRLs) established by European legislation. The proposed method was applied for determination of pesticide residue in four selected apple varieties after harvesting. Whole and processed fruits (peel and peeled fruits) were analyzed from different treatment systems: two conventional, one based on integrated pest management (IPM) and two variants based on organic production (controls). Higher levels of pesticide residues were found in apple fruits under conventional conditions. Fenitrothion and chlorpyrifos residues were detected frequently in apple peel at concentrations up to 0.45 and 0.77 mg kg(-1), respectively. The levels found in the whole fruits of the same samples were much lower than in peel and below the respective MRLs (0.5 mg kg(-1) for both pesticides). Measurable residues of triadimenol only, up to 0.05 mg kg(-1), concentrated in the peel, were found in the apples from IPM.

17. Improvement of the Raman detection system for pesticide residues on/in fruits and vegetables

Science.gov (United States)

Li, Yan; Peng, Yankun; Zhai, Chen; Chao, Kuanglin; Qin, Jianwei

2017-05-01

Pesticide residue is one of the major challenges to fruits safety, while the traditional detection methods of pesticide residue on fruits and vegetables can't afford the demand of rapid detection in actual production because of timeconsuming. Thus rapid identification and detection methods for pesticide residue are urgently needed at present. While most Raman detection systems in the market are spot detection systems, which limits the range of application. In the study, our lab develops a Raman detection system to achieve area-scan thorough the self-developed spot detection Raman system with a control software and two devices. In the system, the scanning area is composed of many scanning spots, which means every spot needs to be detected and more time will be taken than area-scan Raman system. But lower detection limit will be achieved in this method. And some detection device is needed towards fruits and vegetables in different shape. Two detection devices are developed to detect spherical fruits and leaf vegetables. During the detection, the device will make spherical fruit rotate along its axis of symmetry, and leaf vegetables will be pressed in the test surface smoothly. The detection probe will be set to keep a proper distance to the surface of fruits and vegetables. It should make sure the laser shins on the surface of spherical fruit vertically. And two software are used to detect spherical fruits and leaf vegetables will be integrated to one, which make the operator easier to switch. Accordingly two detection devices for spherical fruits and leaf vegetables will also be portable devices to make it easier to change. In the study, a new way is developed to achieve area-scan result by spot-scan Raman detection system.

18. The precision of mapping between number words and the approximate number system predicts children's formal math abilities.

Science.gov (United States)

Libertus, Melissa E; Odic, Darko; Feigenson, Lisa; Halberda, Justin

2016-10-01

Children can represent number in at least two ways: by using their non-verbal, intuitive approximate number system (ANS) and by using words and symbols to count and represent numbers exactly. Furthermore, by the time they are 5years old, children can map between the ANS and number words, as evidenced by their ability to verbally estimate numbers of items without counting. How does the quality of the mapping between approximate and exact numbers relate to children's math abilities? The role of the ANS-number word mapping in math competence remains controversial for at least two reasons. First, previous work has not examined the relation between verbal estimation and distinct subtypes of math abilities. Second, previous work has not addressed how distinct components of verbal estimation-mapping accuracy and variability-might each relate to math performance. Here, we addressed these gaps by measuring individual differences in ANS precision, verbal number estimation, and formal and informal math abilities in 5- to 7-year-old children. We found that verbal estimation variability, but not estimation accuracy, predicted formal math abilities, even when controlling for age, expressive vocabulary, and ANS precision, and that it mediated the link between ANS precision and overall math ability. These findings suggest that variability in the ANS-number word mapping may be especially important for formal math abilities. Copyright © 2016 Elsevier Inc. All rights reserved.

19. The Precision of Mapping Between Number Words and the Approximate Number System Predicts Children’s Formal Math Abilities

Science.gov (United States)

Libertus, Melissa E.; Odic, Darko; Feigenson, Lisa; Halberda, Justin

2016-01-01

Children can represent number in at least two ways: by using their non-verbal, intuitive Approximate Number System (ANS), and by using words and symbols to count and represent numbers exactly. Further, by the time they are five years old, children can map between the ANS and number words, as evidenced by their ability to verbally estimate numbers of items without counting. How does the quality of the mapping between approximate and exact numbers relate to children’s math abilities? The role of the ANS-number word mapping in math competence remains controversial for at least two reasons. First, previous work has not examined the relation between verbal estimation and distinct subtypes of math abilities. Second, previous work has not addressed how distinct components of verbal estimation – mapping accuracy and variability – might each relate to math performance. Here, we address these gaps by measuring individual differences in ANS precision, verbal number estimation, and formal and informal math abilities in 5- to 7-year-old children. We found that verbal estimation variability, but not estimation accuracy, predicted formal math abilities even when controlling for age, expressive vocabulary, and ANS precision, and that it mediated the link between ANS precision and overall math ability. These findings suggest that variability in the ANS-number word mapping may be especially important for formal math abilities. PMID:27348475

20. Assessment of direct exposure and leaching risk from PAHs in roadway and stormwater system residuals.

Science.gov (United States)

Azah, Edmund; Kim, Hwidong; Townsend, Timothy

2017-12-31

Wastes generated from municipal cleaning activities such as street sweeping, ditch cleaning, stormwater pond maintenance, and catch basin sediment removal require appropriate management. Beneficial use of these types of waste is a good alternative to landfilling; however, there are genuine concerns about possible soil and groundwater contamination by pollutants such as polycyclic aromatic hydrocarbons (PAHs). This study assessed the potential risks associated with beneficial use of roadway and stormwater system residuals collected from 14 cities across the state of Florida, USA. Total and leachable concentrations of 16 priority PAHs in the residual samples were measured and compared to appropriate risk-based regulatory threshold values. The bioaccessibility of the PAHs found in the waste streams was also determined using in vitro gastrointestinal leaching test. Of the PAHs studied, benzo [a] pyrene measured concentrations were above appropriate risk-based regulatory threshold values for soil and groundwater, while all other detected PAHs measured concentrations were below. Benzo [a] pyrene concentration (mg/kg) in street sweepings was 1.2 times higher than residential threshold values and 6 times lower than industrial threshold values. The in vitro study found PAH bioaccessibility to range from 1.7% to 49% in six roadway and stormwater system residual samples. Copyright © 2017 Elsevier B.V. All rights reserved.

1. A productivity and cost comparison of two systems for producing biomass fuel from roadside forest treatment residues

Science.gov (United States)

Nathaniel Anderson; Woodam Chung; Dan Loeffler; John Greg Jones

2012-01-01

Forest operations generate large quantities of forest biomass residues that can be used for production of bioenergy and bioproducts. However, a significant portion of recoverable residues are inaccessible to large chip vans, making use financially infeasible. New production systems must be developed to increase productivity and reduce costs to facilitate use of these...

2. Residue and soil carbon sequestration in relation to crop yield as affected by irrigation, tillage, cropping system and nitrogen fertilization

Science.gov (United States)

Information on management practices is needed to increase surface residue and soil C sequestration to obtain farm C credit. The effects of irrigation, tillage, cropping system, and N fertilization were evaluated on the amount of crop biomass (stems and leaves) returned to the soil, surface residue C...

3. Spatial decision support system to evaluate crop residue energy potential by anaerobic digestion.

Science.gov (United States)

Escalante, Humberto; Castro, Liliana; Gauthier-Maradei, Paola; Rodríguez De La Vega, Reynel

2016-11-01

Implementing anaerobic digestion (AD) in energy production from crop residues requires development of decision tools to assess its feasibility and sustainability. A spatial decision support system (SDSS) was constructed to assist decision makers to select appropriate feedstock according to biomethanation potential, identify the most suitable location for biogas facilities, determine optimum plant capacity and supply chain, and evaluate associated risks and costs. SDSS involves a spatially explicit analysis, fuzzy multi-criteria analysis, and statistical and optimization models. The tool was validated on seven crop residues located in Santander, Colombia. For example, fique bagasse generates about 0.21millionm(3)CH4year(-1) (0.329m(3)CH4kg(-1) volatile solids) with a minimum profitable plant of about 2000tonyear(-1) and an internal rate of return of 10.5%. SDSS can be applied to evaluate other biomass resources, availability periods, and co-digestion potential. Copyright © 2016. Published by Elsevier Ltd.

4. Adaptive Control of Non-Minimum Phase Modal Systems Using Residual Mode Filters2. Parts 1 and 2

Science.gov (United States)

Balas, Mark J.; Frost, Susan

2011-01-01

Many dynamic systems containing a large number of modes can benefit from adaptive control techniques, which are well suited to applications that have unknown parameters and poorly known operating conditions. In this paper, we focus on a direct adaptive control approach that has been extended to handle adaptive rejection of persistent disturbances. We extend this adaptive control theory to accommodate problematic modal subsystems of a plant that inhibit the adaptive controller by causing the open-loop plant to be non-minimum phase. We will modify the adaptive controller with a Residual Mode Filter (RMF) to compensate for problematic modal subsystems, thereby allowing the system to satisfy the requirements for the adaptive controller to have guaranteed convergence and bounded gains. This paper will be divided into two parts. Here in Part I we will review the basic adaptive control approach and introduce the primary ideas. In Part II, we will present the RMF methodology and complete the proofs of all our results. Also, we will apply the above theoretical results to a simple flexible structure example to illustrate the behavior with and without the residual mode filter.

5. Study on grey theoretical model of passive residual heat removal system

International Nuclear Information System (INIS)

Zhou Tao; Yang Ruichang; Su, G.H.; Jia Dounan; Sugiyama, K.

2004-01-01

Natural Circulation Passive Residual Heat Removal System is treated as a Grey System by taking into account of its complexity and uncertainty of effect for factors each other. The magnitude and degree of some factors are confirmed by grey incidence analysis method; The one-one relationship of some variables is built by GM (1, 1) model; The relationship between key factor and other effect factors is built (1, 4) model. Grey model shows its more advantage of precision through comparing with multivariate model. (author)

6. Solution of a System of Linear Equations with Fuzzy Numbers

Czech Academy of Sciences Publication Activity Database

Horčík, Rostislav

2008-01-01

Roč. 159, č. 14 (2008), s. 1788-1810 ISSN 0165-0114 R&D Projects: GA AV ČR KJB100300502 Institutional research plan: CEZ:AV0Z10300504 Keywords : fuzzy number * fuzzy interval * interval analysis * fuzzy arithmetic * fuzzy class theory * united solution set Subject RIV: BA - General Mathematics Impact factor: 1.833, year: 2008

7. Residual currents in a multiple-inlet system and the conundrum of the tidal period

Science.gov (United States)

Duran-Matute, Matias; Gerkema, Theo

2015-04-01

In multiple-inlet systems, one may find that, on average, flood dominates in some inlets, while ebb dominates in others. In that case, there is a residual flow through the system, i.e. there is a net flow if one integrates over a tidal period. Conceptually, this seems straightforward. However, to measure such a residual flow presents several difficulties. First, one needs to cover the entire cross-sections of all the inlets over a year or longer to take into account the variability due to wind. Second, the residual flow is usually much smaller than the tidal prisms and hence more uncertain in view of error bars. Third, the duration of 'the' tidal period when calculating a tidally averaged flow is not well defined. Should one take the time between alternate slack tides, or between consecutive high (or low) waters, or other options? There appears to be a fundamental ambiguity in the duration of the tidal period; here we discuss its origins. The problem of defining the tidal period seems to have received little attention in the literature, or perhaps it has not been perceived as a problem at all. One reason for this neglect may be that the focus in tidal analysis is often on the (main) individual tidal constituents, whose periods are well-defined. Indeed, the harmonic method developed by Kelvin exploits this fact, making it possible to predict high and low waters precisely by adding up the different constituents after their amplitudes and phases have been determined empirically for the location in question. The period between subsequent high (or low) waters is then simply an outcome of this method. Another reason for neglecting this problem may be that the main interest was in computing a representative quantity such as the yearly average residual flow through the inlets. For such quantities, the definition of the tidal period is not as relevant since one integrates over a much longer period. Recently, however, it has been shown, for the Western Dutch Wadden Sea, that

8. Control system of an anaerobia reactor used in the treatment of the Industrial residual waters

International Nuclear Information System (INIS)

Duque, Mauricio; Giraldo, Eugenio; Bello Frank

1995-01-01

The technology of the anaerobia digestion, has had a wide acceptance in the Colombian means for the treatment of industrial residual waters, especially for the economic advantages that it present and the good purification results. The technology of the anaerobia digestion for the treatment of residual waters, is based in the conversion of the organic matter present in the polluted waters, in methane and carbon dioxide. These two gases are removed of the reactor by means of special structures of gathering. Microorganisms that are sensitive to the changes of the pH mediate the conversion of the organic matter to CH4 and CO2. Therefore, the control on the pH is necessary for a correct behavior of the reactor. At the moment many industries are implementing plans of contamination control, that involve treatment of residual waters for means anaerobia. The present investigation is part of a wide work program in the technology of the anaerobia digestion. It is looked for to develop a monitored system and automatic control of reactors discharge anaerobia appraises, in a combined effort among the departments of Civil and Electric Engineering of the Andes University

9. A High-Frequency Eddy Current Inspection System and Its Application to the Residual Stress Characterization

International Nuclear Information System (INIS)

Nakagawa, N.; Lee, C.; Shen, Y.

2006-01-01

This paper reports on an on-going project toward developing electromagnetic residual-stress characterization method. Specifically, we present recent work on an eddy current technique and model-based inversion method, specific to nickel-based superalloys. In our approach, we treat residual stress measurements essentially as a 'layer-substrate' problem (a shot-peened layer on an alloy substrate), to which the swept-frequency EC technique is applicable. To this end, a high-sensitivity eddy current system with operating frequency up to 50MHz has been recently developed and validated. We present a description of our instrumentation that includes proprietary probes fabricated by the PCB technology, and laboratory-grade instruments under software control. The paper also describes the experimental procedure for performance studies, supported by preliminary data that distinguish clearly between surfaces before and after shot-peening for nickel-based alloys. In addition, we present forward and inverse model validations which will determine their reliability in the subsequent use in model-based residual stress profile inversion

10. Ball milled bauxite residue as a reinforcing filler in phosphate-based intumescent system

Directory of Open Access Journals (Sweden)

2018-01-01

Full Text Available Bauxite residue (BR is an alumina refinery waste with a global disposal problem. Of the 120 MT generated annually, only 3 MT is disposed via utilization. One of the significant challenges to sustainable utilization has been found to be the cost of processing. In this work, using ball milling, we achieved material modification of bauxite residue. Spectrometric imaging with FESEM showed the transformation from an aggregate structure to nano, platy particulates, leading to particle size homogeneity. BET analysis showed surface area was increased by 23%, while pH was reduced from 10.8 to 9.1 due to collapsing of the hydroxyl surface by the fracturing action of the ball mill. Incorporation of this into a phosphate-based fire retardant, intumescent formulation led to improved material dispersion and the formation of reinforcing heat shielding char nodules. XRD revealed the formation of ceramic metal phosphates which acted as an additional heat sink to the intumescent system, thereby reducing char oxidation and heat transfer to the substrate. Steel substrate temperature from a Bunsen burner test reduced by 33%. Therefore, ball milling can serve as a simple, low-cost processing route for the reuse of bauxite residue in intumescent composites.

11. Using Acid Number as a Leading Indicator of Refrigeration and Air Conditioning System Performance

Energy Technology Data Exchange (ETDEWEB)

Dennis Cartlidge; Hans Schellhase

2003-07-31

This report summarizes a literature review to assess the acidity characteristics of the older mineral oil and newer polyolester (POE) refrigeration systems as well as to evaluate acid measuring techniques used in other non-aqueous systems which may be applicable for refrigeration systems. Failure in the older chlorofluorocarbon/hydrochlorofluorocarbon (CFC/HCFC) / mineral oil systems was primarily due to thermal degradation of the refrigerant which resulted in the formation of hydrochloric and hydrofluoric acids. These are strong mineral acids, which can, over time, severely corrode the system metals and lead to the formation of copper plating on iron surfaces. The oil lubricants used in the older systems were relatively stable and were not prone to hydrolytic degradation due to the low solubility of water in oil. The refrigerants in the newer hydrofluorocarbon (HFC)/POE systems are much more thermally stable than the older CFC/HCFC refrigerants and mineral acid formation is negligible. However, acidity is produced in the new systems by hydrolytic decomposition of the POE lubricants with water to produce the parent organic acids and alcohols used to prepare the POE. The individual acids can therefore vary but they are generally C5 to C9 carboxylic acids. Organic acids are much weaker and far less corrosive to metals than the mineral acids from the older systems but they can, over long time periods, react with metals to form carboxylic metal salts. The salts tend to accumulate in narrow areas such as capillary tubes, particularly if residual hydrocarbon processing chemicals are present in the system, which can lead to plugging. The rate of acid production from POEs varies on a number of factors including chemical structure, moisture levels, temperature, acid concentration and metals. The hydrolysis rate of reaction can be reduced by using driers to reduce the free water concentration and by using scavenging chemicals which react with the system acids. Total acid

12. Design Status of the Capillary Brine Residual in Containment Water Recovery System

Science.gov (United States)

Sargusingh, Miriam J.; Callahan, Michael R.; Garison, John; Houng, Benjamin; Weislogel, Mark M.

2016-01-01

One of the goals of the AES Life Support System (LSS) Project is to achieve 98% water loop closure for long duration human exploration missions beyond low Earth orbit. To meet this objective, the AES LSS Project is developing technologies to recover water from wastewater brine; highly concentrated waste products generated from a primary water recovery system. The state of the art system used aboard the International Space Station (ISS) has the potential to recover up to 85% water from unine wastewater, leaving a significant amounts of water in the waste brine, the recovery of which is critical technology gap that must be filled in order to enable long duration human exploration. Recovering water from the urine wastewater brine is complicated by the concentration of solids as water is removed from the brine, and the concentration of the corrosive, toxic chemicals used to stabilize the urine which fouls and degrades water processing hardware, and poses a hazard to operators and crew. Brine Residual in Containment (BRIC) is focused on solids management through a process of "in-place" drying - the drying of brines within the container used for final disposal. Application of in-place drying has the potential to improve the safety and reliability of the system by reducing the exposure to curew and hardware to the problematic brine residual. Through a collaboration between the NASA Johnson Space Center and Portland Status University, a novel water recovery system was developed that utilizes containment geometry to support passive capillary flow and static phase separation allowing free surface evaporation to take place in a microgravity environment. A notional design for an ISS demonstration system was developed. This paper describes the testing performed to characterize the performance of the system as well as the status of the system level design.

13. Periodic response of nonlinear dynamical system with large number ...

In this paper, a methodology based on shooting technique and Newmark's time integration scheme is proposed for predicting the periodic responses of nonlinear systems directly from solution of second order equations of motion without transforming to double ﬁrst order equations. The proposed methodology is quite ...

14. Periodic response of nonlinear dynamical system with large number ...

Abstract. In this paper, a methodology based on shooting technique and New- mark's time integration scheme is proposed for predicting the periodic responses of nonlinear systems directly from solution of second order equations of motion without transforming to double first order equations. The proposed methodology.

15. Assessment of the advantages of a residual heat removal system inside the reactor pressure vessel

Energy Technology Data Exchange (ETDEWEB)

Gautier, G.M. [Commissariat a lEnergie Atomique, Saint-Paul-Lez-Durance (France)

1995-09-01

In the framework of research on diversified means for removing residual heat from pressurized water reactors, the CEA is studying a passive system called RRP (Refroidissement du Reacteur au Primaire, or primary circuit cooling system). This system consists of integrated heat-exchangers and a layout of the internal structures so as to obtain convection from the primary circuit inside the vessel, whatever the state of the loops. This system is operational for all primary circuit temperatures and pressures, as well as for a wide range of conditions: such as independent from the state of the loops, low volume of water in the primary circuit, compatibility with either a passive or an active operation mode, and compatibility with any other decay heat removal systems. This paper presents an evaluation of the performance of the RRP system in the event of a small primary circuit break in a totally passive operation mode without the intervention of any another system. The results of this evaluation show the potential interest of such a system: a clear increase of the time-delay for the implementation of a low pressure safety injection system and no need for the use of a high pressure safety injection system.

16. Design Status of the Capillary Brine Residual in Containment Water Recovery System

Science.gov (United States)

Callahan, Michael R.; Sargusingh, Miriam

2016-01-01

One of the goals of the AES Life Support System (LSS) Project is to achieve 98% water loop closure for long duration human exploration missions beyond low Earth orbit. To meet this objective, the AES LSS Project is developing technologies to recover water from wastewater brine; highly concentrated waste products generated from a primary water recovery system. The state of the art system used aboard the International Space Station (ISS) has the potential to recover up to 85% water from unine wastewater, leaving a significant amounts of water in the waste brine, the recovery of which is a critical technology gap that must be filled in order to enable long duration human exploration. Recovering water from the urine wastewater brine is complicated by the concentration of solids as water is removed from the brine, and the concentration of the corrosive, toxic chemicals used to stabilize the urine which fouls and degrades water processing hardware, and poses a hazard to operators and crew. Brine Residual in Containment (BRIC) is focused on solids management through a process of "in-place" drying - the drying of brines within the container used for final disposal. Application of in-place drying has the potential to improve the safety and reliability of the system by reducing the exposure to crew and hardware to the problematic brine residual. Through a collaboration between the NASA Johnson Space Center and Portland Status University, a novel water recovery system was developed that utilizes containment geometry to support passive capillary flow and static phase separation allowing free surface evaporation to take place in a microgravity environment. A notional design for an ISS demonstration system was developed. This paper describes the concept for the system level design.

17. A photoelastic measurement system for residual stress analysis in scintillating crystals by conoscopic imaging

Science.gov (United States)

Montalto, L.; Paone, N.; Scalise, L.; Rinaldi, D.

2015-06-01

The assessment of the stress state of scintillating crystals is an important issue for producers as well as users of such materials, because residual stress may arise during growth process. In this paper, a measurement system, based on the use of a photoelastic, conoscopic optical setup, is proposed for the assessment of stress state in scintillating crystals. Local stress values can be measured on the crystal in order to observe their spatial distribution. With the proposed system, it is possible to vary the dimensions of the inspected measurement volume. It has been validated with reference to a known stress state induced in a birefringent crystal sample and it has been tested for the case of loaded and unloaded samples, showing sub-millimetric spatial resolution and stress uncertainty ≤0.25 MPa. The proposed measurement system is a valid method for the inspection of scintillating crystals required by producers and users of such materials.

18. Systemic Associations with Residual Subretinal Fluid after Ranibizumab in Diabetic Macular Edema

Directory of Open Access Journals (Sweden)

Meng-Ju Tsai

2017-01-01

Full Text Available Purpose. To investigate the impact of systemic diseases on the occurrence of subretinal fluid (SRF in diabetic macular edema (DME and prognostic factors for residual SRF following three consecutive monthly intravitreal ranibizumab. Methods. Ninety-seven eyes from 68 patients with DME who completed 3 consecutive monthly injections of ranibizumab were enrolled. Systemic parameters mainly included chronic kidney disease (CKD, hypertension, HbA1c, and insulin dependence. Renal parameters for CKD were serum creatinine, estimated glomerular filtration rate (eGFR, and serum albumin. Ocular factors were baseline central macular thickness (CMT, severity of diabetic retinopathy (DR, and status of panretinal photocoagulation (PRP. Results. Chronic kidney disease had significant correlation with baseline SRF (R=0.397, p<0.001 after partial correlation with adjustment for age and DR severity. As for CKD, lower serum albumin, but not eGFR or serum creatinine, was associated with baseline presence of SRF (p=0.026, p=0.08 and p=0.53, resp., after adjustment for age and DR severity. Overall, lower eGFR and lower HbA1c values, contrary to popular belief, predicted the presence of residual SRF following intravitreal injections (p=0.016 and p<0.001, resp.. Conclusions. Tight sugar control and poorer baseline kidney function may slow the resorption of SRF after anti-VEGF injections in patients with DME in the short term.

19. Florfenicol residues in rainbow trout after oral dosing in recirculating and flow-through culture systems.

Science.gov (United States)

Meinertz, J R; Hess, K R; Bernardy, J A; Gaikowski, M P; Whitsel, M; Endris, R G

2014-12-01

Aquaflor is a feed premix for fish containing the broad spectrum antibacterial agent florfenicol (FFC) incorporated at a ratio of 50% (w/w). To enhance the effectiveness of FFC for salmonids infected with certain isolates of Flavobacterium psychrophilum causing cold water disease, the FFC dose must be increased from the standard 10 mg·kg⁻¹ body weight (BW)·d⁻¹ for 10 consecutive days. A residue depletion study was conducted to determine whether FFC residues remaining in the fillet tissue after treating fish at an increased dose would be safe for human consumption. Groups of Rainbow Trout Oncorhynchus mykiss (total n = 144; weight range, 126-617 g) were treated with FFC at 20 mg·kg⁻¹ BW·d⁻¹ for 10 d in a flow-through system (FTS) and a recirculating aquaculture system (RAS) each with a water temperature of ∼13°C. The two-tank RAS included a nontreated tank containing 77 fish. Fish were taken from each tank (treated tank, n = 16; nontreated tank, n = 8) at 6, 12, 24, 48, 72, 120, 240, 360, and 480 h posttreatment. Florfenicol amine (FFA) concentrations (the FFC marker residue) in skin-on fillets from treated fish were greatest at 12 h posttreatment (11.58 μg/g) in the RAS and were greatest at 6 h posttreatment (11.09 μg/g) in the FTS. The half-lives for FFA in skin-on fillets from the RAS and FTS were 20.3 and 19.7 h, respectively. Assimilation of FFC residues in the fillets of nontreated fish sharing the RAS with FFC-treated fish was minimal. Florfenicol water concentrations peaked in the RAS-treated tank and nontreated tanks at 10 h (453 μg/L) and 11 h (442 μg/L) posttreatment, respectively. Monitoring of nitrite concentrations throughout the study indicated the nitrogen oxidation efficiency of the RAS biofilter was minimally impacted by the FFC treatment.

20. Florfenicol residues in Rainbow Trout after oral dosing in recirculating and flow-through culture systems

Science.gov (United States)

Meinertz, Jeffery R.; Hess, Karina R.; Bernady, Jeffry A.; Gaikowski, M. P.; Whitsel, Melissa; Endris, R. G.

2014-01-01

Aquaflor is a feed premix for fish containing the broad spectrum antibacterial agent florfenicol (FFC) incorporated at a ratio of 50% (w/w). To enhance the effectiveness of FFC for salmonids infected with certain isolates of Flavobacterium psychrophilum causing coldwater disease, the FFC dose must be increased from the standard 10 mg·kg−1 body weight (BW)·d−1 for 10 consecutive days. A residue depletion study was conducted to determine whether FFC residues remaining in the fillet tissue after treating fish at an increased dose would be safe for human consumption. Groups of Rainbow Trout Oncorhynchus mykiss (total n = 144; weight range, 126–617 g) were treated with FFC at 20 mg·kg−1 BW·d−1 for 10 d in a flow-through system (FTS) and a recirculating aquaculture system (RAS) each with a water temperature of ∼13°C. The two-tank RAS included a nontreated tank containing 77 fish. Fish were taken from each tank (treated tank, n = 16; nontreated tank, n = 8) at 6, 12, 24, 48, 72, 120, 240, 360, and 480 h posttreatment. Florfenicol amine (FFA) concentrations (the FFC marker residue) in skin-on fillets from treated fish were greatest at 12 h posttreatment (11.58 μg/g) in the RAS and were greatest at 6 h posttreatment (11.09 μg/g) in the FTS. The half-lives for FFA in skin-on fillets from the RAS and FTS were 20.3 and 19.7 h, respectively. Assimilation of FFC residues in the fillets of nontreated fish sharing the RAS with FFC-treated fish was minimal. Florfenicol water concentrations peaked in the RAS-treated tank and nontreated tanks at 10 h (453 μg/L) and 11 h (442 μg/L) posttreatment, respectively. Monitoring of nitrite concentrations throughout the study indicated the nitrogen oxidation efficiency of the RAS biofilter was minimally impacted by the FFC treatment.

1. Developing an Integrated Model Framework for the Assessment of Sustainable Agricultural Residue Removal Limits for Bioenergy Systems

Energy Technology Data Exchange (ETDEWEB)

David Muth, Jr.; Jared Abodeely; Richard Nelson; Douglas McCorkle; Joshua Koch; Kenneth Bryden

2011-08-01

Agricultural residues have significant potential as a feedstock for bioenergy production, but removing these residues can have negative impacts on soil health. Models and datasets that can support decisions about sustainable agricultural residue removal are available; however, no tools currently exist capable of simultaneously addressing all environmental factors that can limit availability of residue. The VE-Suite model integration framework has been used to couple a set of environmental process models to support agricultural residue removal decisions. The RUSLE2, WEPS, and Soil Conditioning Index models have been integrated. A disparate set of databases providing the soils, climate, and management practice data required to run these models have also been integrated. The integrated system has been demonstrated for two example cases. First, an assessment using high spatial fidelity crop yield data has been run for a single farm. This analysis shows the significant variance in sustainably accessible residue across a single farm and crop year. A second example is an aggregate assessment of agricultural residues available in the state of Iowa. This implementation of the integrated systems model demonstrates the capability to run a vast range of scenarios required to represent a large geographic region.

2. Role of Hot Water System Design on Factors Influential to Pathogen Regrowth: Temperature, Chlorine Residual, Hydrogen Evolution, and Sediment.

Science.gov (United States)

Brazeau, Randi H; Edwards, Marc A

2013-10-01

Residential water heating is linked to growth of pathogens in premise plumbing, which is the primary source of waterborne disease in the United States. Temperature and disinfectant residual are critical factors controlling increased concentration of pathogens, but understanding of how each factor varies in different water heater configurations is lacking. A direct comparative study of electric water heater systems was conducted to evaluate temporal variations in temperature and water quality parameters including dissolved oxygen levels, hydrogen evolution, total and soluble metal concentrations, and disinfectant decay. Recirculation tanks had much greater volumes of water at temperature ranges with potential for increased pathogen growth when set at 49°C compared with standard tank systems without recirculation. In contrast, when set at the higher end of acceptable ranges (i.e., 60°C), this relationship was reversed and recirculation systems had less volume of water at risk for pathogen growth compared with conventional systems. Recirculation tanks also tended to have much lower levels of disinfectant residual (standard systems had 40-600% higher residual), 4-6 times as much hydrogen, and 3-20 times more sediment compared with standard tanks without recirculation. On demand tankless systems had very small volumes of water at risk and relatively high levels of disinfectant residual. Recirculation systems may have distinct advantages in controlling pathogens via thermal disinfection if set at 60°C, but these systems have lower levels of disinfectant residual and greater volumes at risk if set at lower temperatures.

3. Application of DIALIFE system for residual life time assessment on nuclear power plants

International Nuclear Information System (INIS)

Vincour, D.

2003-01-01

Instrumentation and Control Systems (I and C), Monitoring and Diagnostic Systems (MDS), Special Temporary Measurement (STM) and Chemical and Laboratory Parameters System enable to obtain detailed information about actual service conditions of power plant components. Thermocouples and strain gauges are used for local measuring near the critical spots of components. The saved data from these systems serve as input data to methods for evaluation in DIALIFE system. A systematic evaluation of experience, safety influence, and design were used for the selection of the critical spots subjected to a degradation. Critical spots are mostly damaged places and consequently determine residual lifetime of whole structure. If critical spots of structure are known, then they have to be included in monitoring the whole structure lifetime. The rapid stress determination on the base of continually measured values by Diagnostic and Monitoring systems is shown. The artificial neural network, prepared stress databases and analytical equation can be used for stress determination for the next assessment using mechanisms of degradation. The experiences from creating database of DIALIFE, selection, acquiring and processing of measured data from various systems of NPP are discussed. Few examples of assessment, opinions and experiences of DIALIFE users are presented. Results from assessment on the base of design transients and measured conditions are shown

4. Residual basins

International Nuclear Information System (INIS)

D'Elboux, C.V.; Paiva, I.B.

1980-01-01

Exploration for uranium carried out over a major portion of the Rio Grande do Sul Shield has revealed a number of small residual basins developed along glacially eroded channels of pre-Permian age. Mineralization of uranium occurs in two distinct sedimentary units. The lower unit consists of rhythmites overlain by a sequence of black shales, siltstones and coal seams, while the upper one is dominated by sandstones of probable fluvial origin. (Author) [pt

5. A Hypergraph and Arithmetic Residue-based Probabilistic Neural Network for classification in Intrusion Detection Systems.

Science.gov (United States)

Raman, M R Gauthama; Somu, Nivethitha; Kirthivasan, Kannan; Sriram, V S Shankar

2017-08-01

Over the past few decades, the design of an intelligent Intrusion Detection System (IDS) remains an open challenge to the research community. Continuous efforts by the researchers have resulted in the development of several learning models based on Artificial Neural Network (ANN) to improve the performance of the IDSs. However, there exists a tradeoff with respect to the stability of ANN architecture and the detection rate for less frequent attacks. This paper presents a novel approach based on Helly property of Hypergraph and Arithmetic Residue-based Probabilistic Neural Network (HG AR-PNN) to address the classification problem in IDS. The Helly property of Hypergraph was exploited for the identification of the optimal feature subset and the arithmetic residue of the optimal feature subset was used to train the PNN. The performance of HG AR-PNN was evaluated using KDD CUP 1999 intrusion dataset. Experimental results prove the dominance of HG AR-PNN classifier over the existing classifiers with respect to the stability and improved detection rate for less frequent attacks. Copyright © 2017 Elsevier Ltd. All rights reserved.

6. Compared cycling in a soil-plant system of pea and barley residue nitrogen

DEFF Research Database (Denmark)

Jensen, E.S.

1996-01-01

the 1-3 year period, residual organic labelled N from different residues declined at similar rates, mean decay constant: 0.18 yr(-1). After 3 years, 45% of the barley and on average 32% of the pea residue N were present as soil organic N. The proportion of residue N remaining in the soil after 3 years...... of decomposition was most strongly correlated with the total and soluble N concentrations in the residue. The ratio (% inorganic N derived from residues):(% organic N derived from residues) was used as a measure of the rate residue N stabilization. From initial values of 3-7 the ratios declined to on average 1...... and 35% of the pea residue N were unaccounted for. Since these apparent losses are comparable to almost twice the amounts of pea and barley residue N taken up by the perennial ryegrass crop, there seems to be a potential for improved crop residue management in order to conserve nutrients in the soil...

7. Residual deposits (residual soil)

International Nuclear Information System (INIS)

Khasanov, A.Kh.

1988-01-01

Residual soil deposits is accumulation of new formate ore minerals on the earth surface, arise as a result of chemical decomposition of rocks. As is well known, at the hyper genes zone under the influence of different factors (water, carbonic acid, organic acids, oxygen, microorganism activity) passes chemical weathering of rocks. Residual soil deposits forming depends from complex of geologic and climatic factors and also from composition and physical and chemical properties of initial rocks

8. Development project for a residual life evaluation system in LWR NPPs

International Nuclear Information System (INIS)

Hervia, F.; Francia, L.

1995-01-01

Economic and safety factors have stimulated the interest of Spanish NPPs towards the optimisation of NPP Residual Life Management, and consequently the need to have access to tools to support such management. This requirement has been the subject of a project, the main objectives of which are the identification of the most significant ageing factors in NPPs and their corresponding parameters, and the development of an associated integrated monitoring system. Work on the project was started by UNESA in September 1992 and is partly financed from PIE funds. This paper gives a general description of the objectives and activities of Phase 1, the Definition of the Core Project, which is nearing completion, and Phase 2, the Application of the Integrated System in a Pilot Plant. Phase 1 has confirmed the technical feasibility of the system and its suitability as a tool for the continuous evaluation of the plant condition. Furthermore, it has raised issues of great interest to NPPs. The results and conclusions of Phase 1 are currently being used to define the most suitable scope for the development and implementation of the system in the pilot plant (Phase 2), so that all the main functions of the system are tested without incurring unnecessary costs

9. Anaerobic degradation of inedible crop residues produced in a Controlled Ecological Life Support System

Science.gov (United States)

Schwingel, W. R.; Sager, J. C.

1996-01-01

An anaerobic reactor seeded with organisms from an anaerobic lagoon was used to study the degradation of inedible crop residues from potato and wheat crops grown in a closed environment. Conversion of this biomass into other products was also evaluated. Degradation of wheat volatile solids was about 25% where that of potato was about 50%. The main product of the anaerobic fermentation of both crops was acetic acid with smaller quantities of propionate and butyrate produced. Nitrate, known to be high in concentration in inedible potato and wheat biomass grown hydroponically, was converted to ammonia in the anaerobic reactor. Both volatile fatty acid and ammonia production may have implications in a crop production system.

10. Sensory-integration system rather than approximate number system underlies numerosity processing: A critical review.

Science.gov (United States)

Gebuis, Titia; Cohen Kadosh, Roi; Gevers, Wim

2016-11-01

It is widely accepted that human and nonhuman species possess a specialized system to process large approximate numerosities. The theory of an evolutionarily ancient approximate number system (ANS) has received converging support from developmental studies, comparative experiments, neuroimaging, and computational modelling, and it is one of the most dominant and influential theories in numerical cognition. The existence of an ANS system is significant, as it is believed to be the building block of numerical development in general. The acuity of the ANS is related to future arithmetic achievements, and intervention strategies therefore aim to improve the ANS. Here we critically review current evidence supporting the existence of an ANS. We show that important shortcomings and confounds exist in the empirical studies on human and non-human animals as well as the logic used to build computational models that support the ANS theory. We conclude that rather than taking the ANS theory for granted, a more comprehensive explanation might be provided by a sensory-integration system that compares or estimates large approximate numerosities by integrating the different sensory cues comprising number stimuli. Crown Copyright © 2016. Published by Elsevier B.V. All rights reserved.

11. High-throughput mosquito and fly bioassay system for natural and artificial substrates treated with residual insecticides.

Science.gov (United States)

Aldridge, Robert L; Wynn, W Wayne; Britch, Seth C; Allan, Sandra A; Walker, Todd W; Geden, Christopher J; Hogsette, Jerome A; Linthicum, Kenneth J

2013-03-01

A high-throughput bioassay system to evaluate the efficacy of residual pesticides against mosquitoes and muscid flies with minimal insect handling was developed. The system consisted of 4 components made of readily available materials: 1) a CO2 anaesthetizing chamber, 2) a specialized aspirator, 3) a cylindrical flat-bottomed glass bioassay chamber assembly, and 4) a customized rack.

12. Passive residual energy utilization system in thermal cycles on water-cooled power reactors

International Nuclear Information System (INIS)

Placco, Guilherme M.; Guimaraes, Lamartine N.F.; Santos, Rubens S. dos

2013-01-01

This work presents a concept of a residual energy utilization in nuclear plants thermal cycles. After taking notice of the causes of the Fukushima nuclear plant accident, an idea arose to adapt a passive thermal circuit as part of the ECCS (Emergency Core Cooling System). One of the research topics of IEAv (Institute for Advanced Studies), as part of the heat conversion of a space nuclear power system is a passive multi fluid turbine. One of the main characteristics of this device is its passive capability of staying inert and be brought to power at moments notice. During the first experiments and testing of this passive device, it became clear that any small amount of gas flow would generate power. Given that in the first stages of the Fukushima accident and even during the whole event there was plenty availability of steam flow that would be the proper condition to make the proposed system to work. This system starts in case of failure of the ECCS, including loss of site power, loss of diesel generators and loss of the battery power. This system does not requires electricity to run and will work with bleed steam. It will generate enough power to supply the plant safety system avoiding overheating of the reactor core produced by the decay heat. This passive system uses a modified Tesla type turbine. With the tests conducted until now, it is possible to ensure that the operation of this new turbine in a thermal cycle is very satisfactory and it performs as expected. (author)

13. Passive residual energy utilization system in thermal cycles on water-cooled power reactors

Energy Technology Data Exchange (ETDEWEB)

Placco, Guilherme M.; Guimaraes, Lamartine N.F., E-mail: placco@ieav.cta.br, E-mail: guimarae@ieav.cta.br [Instituto de Estudos Avancados (IEAV/DCTA) Sao Jose dos Campos, SP (Brazil); Santos, Rubens S. dos, E-mail: rsantos@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN -RJ), Rio de Janeiro, RJ (Brazil)

2013-07-01

This work presents a concept of a residual energy utilization in nuclear plants thermal cycles. After taking notice of the causes of the Fukushima nuclear plant accident, an idea arose to adapt a passive thermal circuit as part of the ECCS (Emergency Core Cooling System). One of the research topics of IEAv (Institute for Advanced Studies), as part of the heat conversion of a space nuclear power system is a passive multi fluid turbine. One of the main characteristics of this device is its passive capability of staying inert and be brought to power at moments notice. During the first experiments and testing of this passive device, it became clear that any small amount of gas flow would generate power. Given that in the first stages of the Fukushima accident and even during the whole event there was plenty availability of steam flow that would be the proper condition to make the proposed system to work. This system starts in case of failure of the ECCS, including loss of site power, loss of diesel generators and loss of the battery power. This system does not requires electricity to run and will work with bleed steam. It will generate enough power to supply the plant safety system avoiding overheating of the reactor core produced by the decay heat. This passive system uses a modified Tesla type turbine. With the tests conducted until now, it is possible to ensure that the operation of this new turbine in a thermal cycle is very satisfactory and it performs as expected. (author)

14. One Language, Two Number-Word Systems and Many Problems: Numerical Cognition in the Czech Language

Science.gov (United States)

Pixner, S.; Zuber, J.; Hermanova, V.; Kaufmann, L.; Nuerk, H.-C.; Moeller, K.

2011-01-01

Comparing numerical performance between different languages does not only mean comparing different number-word systems, but also implies a comparison of differences regarding culture or educational systems. The Czech language provides the remarkable opportunity to disentangle this confound as there exist two different number-word systems within…

15. The Relationship between Non-Verbal Systems of Number and Counting Development: A Neural Signatures Approach

Science.gov (United States)

Hyde, Daniel C.; Simon, Charline E.; Berteletti, Ilaria; Mou, Yi

2017-01-01

Two non-verbal cognitive systems, an approximate number system (ANS) for extracting the numerosity of a set and a parallel individuation (PI) system for distinguishing between individual items, are hypothesized to be foundational to symbolic number and mathematics abilities. However, the exact role of each remains unclear and highly debated. Here…

16. Assessing microbiological water quality in drinking water distribution systems with disinfectant residual using flow cytometry.

Science.gov (United States)

Gillespie, Simon; Lipphaus, Patrick; Green, James; Parsons, Simon; Weir, Paul; Juskowiak, Kes; Jefferson, Bruce; Jarvis, Peter; Nocker, Andreas

2014-11-15

Flow cytometry (FCM) as a diagnostic tool for enumeration and characterization of microorganisms is rapidly gaining popularity and is increasingly applied in the water industry. In this study we applied the method to obtain a better understanding of total and intact cell concentrations in three different drinking water distribution systems (one using chlorine and two using chloramines as secondary disinfectants). Chloramine tended to result in lower proportions of intact cells than chlorine over a wider residual range, in agreement with existing knowledge that chloramine suppresses regrowth more efficiently. For chlorinated systems, free chlorine concentrations above 0.5 mg L(-1) were found to be associated with relatively low proportions of intact cells, whereas lower disinfectant levels could result in substantially higher percentages of intact cells. The threshold for chlorinated systems is in good agreement with guidelines from the World Health Organization. The fact that the vast majority of samples failing the regulatory coliform standard also showed elevated proportions of intact cells suggests that this parameter might be useful for evaluating risk of failure. Another interesting parameter for judging the microbiological status of water, the biological regrowth potential, greatly varied among different finished waters providing potential help for investment decisions. For its measurement, a simple method was introduced that can easily be performed by water utilities with FCM capability. Copyright © 2014 Elsevier Ltd. All rights reserved.

17. Bioenergy for District Bioheating System (DBS) from eucalyptus residues in a European coal-producing region

International Nuclear Information System (INIS)

Paredes-Sánchez, José P.; López-Ochoa, Luis M.; López-González, Luis M.; Xiberta-Bernat, Jorge

2016-01-01

Highlights: • The paper introduces a combined method to evaluate bioenergy. • Forest biomass needs to be studied as a fuel supplier and carbon sink. • The forests under study produce about 28 kt dry and 0.15 Mt CO 2 per year. • Examined a District Bioheating System (DBS) with the available biomass. - Abstract: Since forest biomass can substitute for CO 2 -emitting fossil fuels in the energy sector, forest management can greatly affect the global carbon cycle. Eucalyptus globulus has adapted very well in the coal region of the Principality of Asturias (Northwestern Spain) and has become highly regarded as a valuable raw material for the pulp and paper industry. In the present work, the Eucalyptus globulus is studied as a key natural energy source in order to improve existing methods and develop new ways of optimizing the evaluation and use of both forest biomass and woody residue in energy systems, in accordance with sustainable forestry industry safety and environmental requirements. The feasibility of utilizing forest biomass instead of natural gas in a District Bioheating System (DBS) has been examined based on an analysis of its economical and environmental impacts.

18. Deposition behavior of residual aluminum in drinking water distribution system: Effect of aluminum speciation.

Science.gov (United States)

Zhang, Yue; Shi, Baoyou; Zhao, Yuanyuan; Yan, Mingquan; Lytle, Darren A; Wang, Dongsheng

2016-04-01

Finished drinking water usually contains some residual aluminum. The deposition of residual aluminum in distribution systems and potential release back to the drinking water could significantly influence the water quality at consumer taps. A preliminary analysis of aluminum content in cast iron pipe corrosion scales and loose deposits demonstrated that aluminum deposition on distribution pipe surfaces could be excessive for water treated by aluminum coagulants including polyaluminum chloride (PACl). In this work, the deposition features of different aluminum species in PACl were investigated by simulated coil-pipe test, batch reactor test and quartz crystal microbalance with dissipation monitoring. The deposition amount of non-polymeric aluminum species was the least, and its deposition layer was soft and hydrated, which indicated the possible formation of amorphous Al(OH)3. Al13 had the highest deposition tendency, and the deposition layer was rigid and much less hydrated, which indicated that the deposited aluminum might possess regular structure and self-aggregation of Al13 could be the main deposition mechanism. While for Al30, its deposition was relatively slower and deposited aluminum amount was relatively less compared with Al13. However, the total deposited mass of Al30 was much higher than that of Al13, which was attributed to the deposition of particulate aluminum matters with much higher hydration state. Compared with stationary condition, stirring could significantly enhance the deposition process, while the effect of pH on deposition was relatively weak in the near neutral range of 6.7 to 8.7. Copyright © 2015. Published by Elsevier B.V.

19. Concept Design of a Gravity Core Cooling Tank as a Passive Residual Heat Removal System for a Research Reactor

International Nuclear Information System (INIS)

Lee, Kwonyeong; Chi, Daeyoung; Kim, Seong Hoon; Seo, Kyoungwoo; Yoon, Juhyeon

2014-01-01

A core downward flow is considered to use a plate type fuel because it is benefit to install the fuel in the core. If a flow inversion from a downward to upward flow in the core by a natural circulation is introduced within a high heat flux region of residual heat, the fuel fails instantly due to zero flow. Therefore, the core downward flow should be sufficiently maintained until the residual heat is in a low heat flux region. In a small power research reactor, inertia generated by a flywheel of the PCP can maintain a downward flow shortly and resolve the problem of a flow inversion. However, a high power research reactor more than 10 MW should have an additional method to have a longer downward flow until a low heat flux. Usually, other research reactors have selected an active residual heat removal system as a safety class. But, an active safety system is difficult to design and expensive to construct. A Gravity Core Cooling Tank (GCCT) beside the reactor pool with a Residual Heat Removal Pipe connecting two pools was developed and designed preliminarily as a passive residual heat removal system for an open-pool type research reactor. It is very simple to design and cheap to construct. Additionally, a non-safety, but active residual heat removal system is applied with the GCCT. It is a Pool Water Cooling and Purification System. It can improve the usability of the research reactor by removing the thermal waves, and purify the reactor pool, the Primary Cooling System, and the GCCT. Moreover, it can reduce the pool top radiation level

20. One language, two number-word systems and many problems: numerical cognition in the Czech language.

Science.gov (United States)

Pixner, S; Zuber, J; Heřmanová, V; Kaufmann, L; Nuerk, H-C; Moeller, K

2011-01-01

1. A process for treatment of residues from dry/semidry APC systems at municipal solid waste incinerators. Final report

Energy Technology Data Exchange (ETDEWEB)

Hjelmar, O. [VKI, Hoersholm (Denmark)] Holland, D. [FLS miljoe a/s, Valby (Denmark)] Poulsen, B. [KARA, Roskilde (Denmark)

1997-08-01

The main objective of the project has been to establish and test a process for treatment of residues from the semidry (and dry) lime injection based APC processes at MSWIs, which will ensure that the residues can be managed in an environmentally safe manner. In pursuit of this goal, the following activities have been carried out: Performance of pilot scale extractions (approximately 50 kg of residue per batch) at the KARA MSWI in Roskilde of semidry APC system residues in order to establish and optimize process conditions. The optimization includes consideration of the possibilities for subsequent treatment/stabilization of the extracted solid phase as well as the possibility of treatment and safe discharge/utilization of the extract; Performance of chemical characterization, hydrogeochemical model calculations and experimental work in order to improve the understanding of the mechanisms and factors which for several contaminants control the equilibrium between the solid and liquid phases, both in the short and the long germ, and to use this information to obtain an environmentally acceptable method for stabilization/treatment of the extracted residues while at the same time minimizing the necessary amount of additives; production of treated residues and performance of leaching tests on these to assess and demonstrate the effectiveness of the entire process (extraction + stabilization/treatment); Evaluation of the technical, economical and environmental consequences of full scale implementation of the process. (EG) EFP-94. 19 refs.

2. Residual thermal stress simulation in three-dimensional molar crown systems: a finite element analysis.

Science.gov (United States)

Bonfante, Estevam A; Rafferty, Brian T; Silva, Nelson R F A; Hanan, Jay C; Rekow, Elizabeth Dianne; Thompson, Van P; Coelho, Paulo G

2012-10-01

To simulate coefficient of thermal expansion (CTE)-generated stress fields in monolithic metal and ceramic crowns, and CTE mismatch stresses between metal, alumina, or zirconia cores and veneer layered crowns when cooled from high temperature processing. A 3D computer-aided design model of a mandibular first molar crown was generated. Tooth preparation comprised reduction of proximal walls by 1.5 mm and of occlusal surfaces by 2.0 mm. Crown systems were monolithic (all-porcelain, alumina, metal, or zirconia) or subdivided into a core (metallic, zirconia, or alumina) and a porcelain veneer layer. The model was thermally loaded from 900°C to 25°C. A finite element mesh of three nodes per edge and a first/last node interval ratio of 1 was used, resulting in approximately 60,000 elements for both solids. Regions and values of maximum principal stress at the core and veneer layers were determined through 3D graphs and software output. The metal-porcelain and zirconia-porcelain systems showed compressive fields within the veneer cusp bulk, whereas alumina-porcelain presented tensile fields. At the core/veneer interface, compressive fields were observed for the metal-porcelain system, slightly tensile for the zirconia-porcelain, and higher tensile stress magnitudes for the alumina-porcelain. Increasingly compressive stresses were observed for the metal, alumina, zirconia, and all-porcelain monolithic systems. Variations in residual thermal stress levels were observed between bilayered and single-material systems due to the interaction between crown configuration and material properties. © 2012 by the American College of Prosthodontists.

3. Block quasi-minimal residual iterations for non-Hermitian linear systems

Energy Technology Data Exchange (ETDEWEB)

Freund, R.W. [AT& T Bell Labs., Murray Hill, NJ (United States)

1994-12-31

Many applications require the solution of multiple linear systems that have the same coefficient matrix, but differ only in their right-hand sides. Instead of applying an iterative method to each of these systems individually, it is usually more efficient to employ a block version of the method that generates blocks of iterates for all the systems simultaneously. An example of such an iteration is the block conjugate gradient algorithm, which was first studied by Underwood and OLeary. On parallel architectures, block versions of conjugate gradient-type methods are attractive even for the solution of single linear systems, since they have fewer synchronization points than the standard versions of these algorithms. In this talk, the author presents a block version of Freund and Nachtigals quasi-minimal residual (QMR) method for the iterative solution of non-Hermitian linear systems. He describes two different implementations of the block-QMR method, one based on a block version of the three-term Lanczos algorithm and one based on coupled two-term block recurrences. In both cases, the underlying block-Lanczos process still allows arbitrary normalizations of the vectors within each block, and the author discusses different normalization strategies. To maintain linear independence within each block, it is usually necessary to reduce the block size in the course of the iteration, and the author describes a deflation technique for performing this reduction. He also present some convergence results, and reports results of numerical experiments with the block-QMR method. Finally, the author discusses possible block versions of transpose-free Lanczos-based iterations such as the TFQMR method.

4. Productivity and cost analysis of a mobile pyrolysis system deployed to convert mill residues into biochar

Science.gov (United States)

Woodam Chung; Dongyeob Kim; Nathaniel Anderson

2012-01-01

Forest and mill residues are a promising source of biomass feedstock for the production of bioenergy, biofuels and bioproducts. However, high costs of transportation and handling of feedstock often make utilization of forest residues, such as logging slash, financially unviable. As a result, these materials are often considered waste and left on site to decompose or...

5. Calibration of a portable cost-effective chemical residue detection system with adaptive neural net control

Science.gov (United States)

Tripp, Alan C.; Walker, James C.

2003-07-01

The Sensory Research Institute at the Florida State University has quantitatively characterized a chemical residue detection system with adaptive neural net data processing. Two separate configurations, "Stormy" and "Gaea", were trained by exposure to decreasing amounts of n-amyl acetate from chemical emitters randomly distributed among a collection of non-emitters. The concentration of chemical in the sampled air stream was controlled precisely. The detection threshold for "Stormy" was 1.14 ppt; that for "Gaea" was 1.9 ppt. Cycle time for sampling and chemical analysis of each sample port was on the order of seconds. Possible effects on the sensors of environmental factors such as ambient humidity, temperature, and air velocity were not considered. Besides processing individual air sample data, the neural nets can sense concentration gradients and track to chemical source. The adaptive neural nets are accessed by a voice recognition system and are capable of point testing or free-ranging search. The service life of the detectors, the neural net processors, and auxiliary packaging is approximately 8 years under normal field use. Maintenance requires a good quality kibble and an occasional romp in the park.

6. Determination of oxytetracycline residues in matrixes from a freshwater recirculating aquaculture system.

Science.gov (United States)

Carson, Mary C; Bullock, Graham; Bebak-Williams, Julie

2002-01-01

This paper describes related procedures to determine the amount of oxytetracycline (OTC) present in trout tissue (muscle with skin attached), biofilter sand, sediment, and tank water from a recirculating aquaculture system. OTC was extracted from the matrixes by different techniques, depending on complexity of the matrix and desired OTC detection level in that matrix. Listed in order of increasing complexity, OTC was extracted from tank water by dilution with acidic buffer containing ethylenediaminetetraacetic acid (EDTA); from biofilter sand by shaking with 0.1 N HCl; from sediment by homogenization and shaking with buffer/EDTA; and from ground trout by homogenization and shaking with buffer/EDTA (twice), with further cleanup and concentration of the extract on a polymeric solid-phase extraction cartridge. The 4 procedures all used the same reversed-phase gradient chromatography on a polymeric column with UV detection at 350 nm. The lower limit of detection (estimated) and upper limit of validation for each of these 4 matrixes were 0.04-4.0 microg/g (ppm; trout), 0.03-20 ppm (biofilter sand), 1-6000 ppm (sediment), and 0.003-10 ppm (water). Recoveries ranged from 82 to 108%, with relative standard deviation <20% over the applicable concentration ranges. These procedures were used to monitor OTC residues resulting from medicated feed administered to rainbow trout in a recirculating aquaculture system.

7. Model based fault detection and diagnosis using structured residual approach in a multi-input multi-output system

Directory of Open Access Journals (Sweden)

Asokan A.

2007-01-01

Full Text Available Fault detection and isolation (FDI is a task to deduce from observed variable of the system if any component is faulty, to locate the faulty components and also to estimate the fault magnitude present in the system. This paper provides a systematic method of fault diagnosis to detect leak in the three-tank process. The proposed scheme makes use of structured residual approach for detection, isolation and estimation of faults acting on the process [1]. This technique includes residual generation and residual evaluation. A literature review showed that the conventional fault diagnosis methods like the ordinary Chisquare (ψ2 test method, generalized likelihood ratio test have limitations such as the "false alarm" problem. From the results it is inferred that the proposed FDI scheme diagnoses better when compared to other conventional methods.

8. Does the Approximate Number System Serve as a Foundation for Symbolic Mathematics?

Science.gov (United States)

Szkudlarek, Emily; Brannon, Elizabeth M.

2017-01-01

In this article we first review evidence for the approximate number system (ANS), an evolutionarily ancient and developmentally conservative cognitive mechanism for representing number without language. We then critically review five different lines of support for the proposal that symbolic representations of number build upon the ANS, and discuss…

9. 78 FR 18346 - Federal Acquisition Regulation; Submission for OMB Review; Use of Data Universal Numbering System...

Science.gov (United States)

2013-03-26

... Information Collection 9000- 0145, Use of Data Universal Numbering System (DUNS) as Primary Contractor... Information Collection 9000-0145, Use of Data Universal Numbering System (DUNS) as Primary Contractor... data sources; completing and reviewing the response; and transmitting or disclosing information. The...

10. 77 FR 56212 - Federal Acquisition Regulation; Information Collection; Use of Data Universal Numbering System...

Science.gov (United States)

2012-09-12

... Regulation; Information Collection; Use of Data Universal Numbering System (DUNS) as Primary Contractor... November 13, 2012. ADDRESSES: Submit comments identified by Information Collection 9000- 0145, Use of data... Information Collection 9000-0145, Use of Data Universal Numbering System (DUNS) as Primary Contractor...

11. Number-phase entropic uncertainty relations and Wigner functions for solvable quantum systems with discrete spectra

Energy Technology Data Exchange (ETDEWEB)

Honarasa, G.R., E-mail: honarasa@sutech.ac.i [Atomic and Molecular Group, Faculty of Physics, Yazd University, Yazd (Iran, Islamic Republic of); Tavassoly, M.K., E-mail: mktavassoly@yazduni.ac.i [Atomic and Molecular Group, Faculty of Physics, Yazd University, Yazd (Iran, Islamic Republic of); Hatami, M., E-mail: mhatami@yazduni.ac.i [Atomic and Molecular Group, Faculty of Physics, Yazd University, Yazd (Iran, Islamic Republic of)

2009-10-19

In this Letter, the 'number-phase entropic uncertainty relation' and the 'number-phase Wigner function' of generalized coherent states associated to a few solvable quantum systems with non-degenerate spectra are studied. We also investigate time evolution of 'number-phase entropic uncertainty' and 'Wigner function' of the considered physical systems with the help of temporally stable Gazeau-Klauder coherent states.

12. A systems dynamics approach for supporting regional decisions on the energetic use of regional biomass residues.

Science.gov (United States)

Szarka, Nora; Wolfbauer, Jürgen; Bezama, Alberto

2018-02-01

This article presents the definition, building, calibration and application of a system dynamics simulation model to quantify the present and future comparative advantages and disadvantages of using forest and agricultural residual biomass for energetic purpose through different processes and technologies, on a regional basis. A dynamic structure of the agricultural and forestry biomass process activities (i.e. production, transport, conversion and consumption) based on regional time-series data was built, implemented into and calibrated within a dynamic simulation tool (Vensim software) within a Hungarian county. Besides the agriculture and forestry sectors, the model includes data about demography, economy, environment and land use, among others. For carrying out the assessment, realistic scenarios of future biomass processes and of biomass use were formulated, characterised by quantitative sustainable development indicators and simulated within the dynamic model. The results prove that the introduced model supports decision making of biomass utilisation in a regional scale, through comparing and analysing quantitative changes of economic, social and environment indicators, which characterise a sustainable regional development. The model therefore allows analyses and evaluation of not only partial prosperous or adverse characteristics of biomass processes and use, but also to relate regional components and their development over time. The developed dynamic tool is therefore a powerful method to model complex systems, such as a regional energy system, considering the framework of the regional preferences stated by the regional stakeholders. It can thus provide useful decision support, especially when used as a priority-based screening of potential regional development programmes in the energy field.

13. Engineering applications of fpgas chaotic systems, artificial neural networks, random number generators, and secure communication systems

CERN Document Server

Tlelo-Cuautle, Esteban; de la Fraga, Luis Gerardo

2016-01-01

This book offers readers a clear guide to implementing engineering applications with FPGAs, from the mathematical description to the hardware synthesis, including discussion of VHDL programming and co-simulation issues. Coverage includes FPGA realizations such as: chaos generators that are described from their mathematical models; artificial neural networks (ANNs) to predict chaotic time series, for which a discussion of different ANN topologies is included, with different learning techniques and activation functions; random number generators (RNGs) that are realized using different chaos generators, and discussions of their maximum Lyapunov exponent values and entropies. Finally, optimized chaotic oscillators are synchronized and realized to implement a secure communication system that processes black and white and grey-scale images. In each application, readers will find VHDL programming guidelines and computer arithmetic issues, along with co-simulation examples with Active-HDL and Simulink. Readers will b...

14. 75 FR 45640 - Draft Guidance for Industry on Residual Drug in Transdermal and Related Drug Delivery Systems...

Science.gov (United States)

2010-08-03

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-D-0246] Draft Guidance for Industry on Residual Drug in Transdermal and Related Drug Delivery Systems; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and Drug...

15. Field evaluations of residual pesticide applications and misting system on militarily relevant materials against medically important mosquitoes in Thailand

Science.gov (United States)

A key strategy to reduce insect-borne disease is to reduce contact between disease vectors and hosts. In the current study, residual pesticide application and misting system were applied on militarily relevant materials and evaluated against medically important mosquitoes. Field evaluations were car...

16. The MARS15-based FermiCORD code system for calculation of the accelerator-induced residual dose

Science.gov (United States)

Grebe, A.; Leveling, A.; Lu, T.; Mokhov, N.; Pronskikh, V.

2018-01-01

The FermiCORD code system, a set of codes based on MARS15 that calculates the accelerator-induced residual doses at experimental facilities of arbitrary configurations, has been developed. FermiCORD is written in C++ as an add-on to Fortran-based MARS15. The FermiCORD algorithm consists of two stages: 1) simulation of residual doses on contact with the surfaces surrounding the studied location and of radionuclide inventories in the structures surrounding those locations using MARS15, and 2) simulation of the emission of the nuclear decay γ-quanta by the residuals in the activated structures and scoring the prompt doses of these γ-quanta at arbitrary distances from those structures. The FermiCORD code system has been benchmarked against similar algorithms based on other code systems and against experimental data from the CERF facility at CERN, and FermiCORD showed reasonable agreement with these. The code system has been applied for calculation of the residual dose of the target station for the Mu2e experiment and the results have been compared to approximate dosimetric approaches.

17. On the Generation of a Robust Residual for Closed-loopControl systems that Exhibit Sensor Faults

DEFF Research Database (Denmark)

2007-01-01

This paper presents a novel design methodology, based on shaping the system frequency response, for the generation of an appropriate residual signal that is sensitive to sensor faults in the presence of model uncertainty and exogenous unknown (unmeasured) disturbances. An integrated feedback cont...

18. The MARS15-based FermiCORD code system for calculation of the accelerator-induced residual dose

Energy Technology Data Exchange (ETDEWEB)

Grebe, A.; Leveling, A.; Lu, T.; Mokhov, N.; Pronskikh, V.

2018-01-01

The FermiCORD code system, a set of codes based on MARS15 that calculates the accelerator-induced residual doses at experimental facilities of arbitrary configurations, has been developed. FermiCORD is written in C++ as an add-on to Fortran-based MARS15. The FermiCORD algorithm consists of two stages: 1) simulation of residual doses on contact with the surfaces surrounding the studied location and of radionuclide inventories in the structures surrounding those locations using MARS15, and 2) simulation of the emission of the nuclear decay gamma-quanta by the residuals in the activated structures and scoring the prompt doses of these gamma-quanta at arbitrary distances from those structures. The FermiCORD code system has been benchmarked against similar algorithms based on other code systems and showed a good agreement. The code system has been applied for calculation of the residual dose of the target station for the Mu2e experiment and the results have been compared to approximate dosimetric approaches.

19. Investigating the Composite Step Biconjugate A-Orthogonal Residual Method for Non-Hermitian Dense Linear Systems in Electromagnetics

NARCIS (Netherlands)

Jing, Yan-Fei; Huang, Ting-Zhu; Carpentieri, Bruno; Duan, Yong

An interesting stabilizing variant of the biconjugate A-orthogonal residual (BiCOR) method is investigated for solving dense complex non-Hermitian systems of linear equations arising from the Galerlcin discretization of surface integral equations in electromagnetics. The novel variant is naturally

20. Linking Energy- and Land-Use Systems: Energy Potentials and Environmental Risks of Using Agricultural Residues in Tanzania

Directory of Open Access Journals (Sweden)

Julia C. Terrapon-Pfaff

2012-02-01

Full Text Available This paper attempts to assess whether renewable energy self-sufficiency can be achieved in the crop production and processing sector in Tanzania and if this could be accomplished in an environmentally sustainable manner. In order to answer these questions the theoretical energy potential of process residues from commercially produced agricultural crops in Tanzania is evaluated. Furthermore, a set of sustainability indicators with focus on environmental criteria is applied to identify risks and opportunities of using these residues for energy generation. In particular, the positive and negative effects on the land-use-system (soil fertility, water use and quality, biodiversity, etc. are evaluated. The results show that energy generation with certain agricultural process residues could not only improve and secure the energy supply but could also improve the sustainability of current land-use practices.

1. Spin distribution of evaporation residues formed in complete and incomplete fusion in 16O+154Sm system

Directory of Open Access Journals (Sweden)

D. Singh

2017-11-01

Full Text Available Spin distributions for several evaporation residues populated in the 16O+154Sm system have been measured at projectile energy ≈ 6.2 MeV/A by using the charged particle–γ-coincidence technique. The measured spin distributions of the evaporation residues populated through incomplete fusion associated with ‘fast’ α and 2α-emission channels are found to be entirely different from fusion–evaporation channels. It is observed that the mean input angular momentum for the evaporation residues formed in incomplete fusion channel is relatively higher than that observed for evaporation residues in complete fusion channels. The feeding intensity profile of evaporation residues populated through complete fusion and incomplete fusion have also been studied. The incomplete fusion channels are found to have narrow range feeding only for high spin states, while complete fusion channels are strongly fed over a broad spin range and widely populated. Comparison of present results with earlier data suggests that the mean input angular momentum values are relatively smaller for spherical target than that of deformed target using the same projectile and incident energy highlighting the role of target deformation in incomplete fusion dynamics.

2. Analysis of plastic residues in maple sap and syrup collected from tubing systems sanitized with isopropyl alcohol

Directory of Open Access Journals (Sweden)

Luc Lagacé

2017-05-01

Full Text Available A plastic tubing system operated under vacuum is usually used to collect sap from maple trees during spring time to produce maple syrup. This system is commonly sanitized with isopropyl alcohol (IPA to remove microbial contamination colonizing the system during the sugar season. Questions have been raised whether IPA would contribute to the leaching of plastic residues in maple sap and syrup coming from sanitized systems. First, an extraction experiment was performed in the lab on commercial plastic tubing materials that were submitted to IPA under harsh conditions. The results of the GC-MS analysis revealed the presence of many compounds that served has target for further tests. Secondly, tests were done on early and mid-season maple sap and syrup coming from many sugarbushes using IPA or not to determine potential concentrations of plastic residues. Results obtained from sap and syrup samples showed that no quantifiable (< 1–75 μg/L concentration of any plastic molecules tested was determined in all samples coming from IPA treated or not treated systems. However, some samples of first sap run used as a rinse solution to be discarded before the season start and that were coming from non sanitized or IPA sanitized systems, showed quantifiable concentrations of chemical residue such as ultraviolet protector (octabenzone. These results show that IPA can be safely used to sanitize maple sap collection system in regards to the leaching of plastic residues in maple sap and syrup and reinforced the need to thoroughly rinse the tubing system at the beginning of the season for both sanitized and non sanitized systems.

3. Analysis of a systematic search-based algorithm for determining protein backbone structure from a minimum number of residual dipolar couplings.

Science.gov (United States)

Wang, Lincong; Donald, Bruce Randall

2004-01-01

We have developed an ab initio algorithm for determining a protein backbone structure using global orientational restraints on internuclear vectors derived from residual dipolar couplings (RDCs) measured in one or two different aligning media by solution nuclear magnetic resonance (NMR) spectroscopy [14, 15]. Specifically, the conformation and global orientations of individual secondary structure elements are computed, independently, by an exact solution, systematic search-based minimization algorithm using only 2 RDCs per residue. The systematic search is built upon a quartic equation for computing, exactly and in constant time, the directions of an internuclear vector from RDCs, and linear or quadratic equations for computing the sines and cosines of backbone dihedral (phi, psi) angles from two vectors in consecutive peptide planes. In contrast to heuristic search such as simulated annealing (SA) or Monte-Carlo (MC) used by other NMR structure determination algorithms, our minimization algorithm can be analyzed rigorously in terms of expected algorithmic complexity and the coordinate precision of the protein structure as a function of error in the input data. The algorithm has been successfully applied to compute the backbone structures of three proteins using real NMR data.

4. Coupling-matrix approach to the Chern number calculation in disordered systems

International Nuclear Information System (INIS)

Zhang Yi-Fu; Ju Yan; Sheng Li; Shen Rui; Xing Ding-Yu; Yang Yun-You; Sheng Dong-Ning

2013-01-01

The Chern number is often used to distinguish different topological phases of matter in two-dimensional electron systems. A fast and efficient coupling-matrix method is designed to calculate the Chern number in finite crystalline and disordered systems. To show its effectiveness, we apply the approach to the Haldane model and the lattice Hofstadter model, and obtain the correct quantized Chern numbers. The disorder-induced topological phase transition is well reproduced, when the disorder strength is increased beyond the critical value. We expect the method to be widely applicable to the study of topological quantum numbers. (rapid communication)

5. The Faculty of Language Integrates the Two Core Systems of Number.

Science.gov (United States)

Hiraiwa, Ken

2017-01-01

Only humans possess the faculty of language that allows an infinite array of hierarchically structured expressions (Hauser et al., 2002; Berwick and Chomsky, 2015). Similarly, humans have a capacity for infinite natural numbers, while all other species seem to lack such a capacity (Gelman and Gallistel, 1978; Dehaene, 1997). Thus, the origin of this numerical capacity and its relation to language have been of much interdisciplinary interest in developmental and behavioral psychology, cognitive neuroscience, and linguistics (Dehaene, 1997; Hauser et al., 2002; Pica et al., 2004). Hauser et al. (2002) and Chomsky (2008) hypothesize that a recursive generative operation that is central to the computational system of language (called Merge ) can give rise to the successor function in a set-theoretic fashion, from which capacities for discretely infinite natural numbers may be derived. However, a careful look at two domains in language, grammatical number and numerals, reveals no trace of the successor function. Following behavioral and neuropsychological evidence that there are two core systems of number cognition innately available, a core system of representation of large, approximate numerical magnitudes and a core system of precise representation of distinct small numbers (Feigenson et al., 2004), I argue that grammatical number reflects the core system of precise representation of distinct small numbers alone. In contrast, numeral systems arise from integrating the pre-existing two core systems of number and the human language faculty. To the extent that my arguments are correct, linguistic representations of number, grammatical number, and numerals do not incorporate anything like the successor function.

6. Nitrógeno residual y lixiviado del fertilizante en el sistema suelo-planta-zeolitas Residual and leached nitrogen in soil plant zeolite systems

Directory of Open Access Journals (Sweden)

Gabriela Civeira

2011-12-01

-1 zeolite + 200 kg N ha-1, NZ2: 200 kg ha-1 zeolite + 200 kg N ha-1. At the maize silking (R1 stage, soil samples were taken to determine the residual N (NO3-N and N-NH4 and plant samples were obtained to measure dry matter (DM and N absorbed by the plant. The N use efficiency (NUE was also evaluated in each treatment. Finally, a forced leaching was applied in all treatments. The results showed that the application of N fertilizer with lower rates of zeolites (NZ1 significantly increased the N absorbed by maize, dry matter and NUE compared to the N treatment. These results can be explained by the favourable effect of the zeolites on nitrogen mineralization and soil water retention. The higher absorbed N levels in NZ1 corresponded with a significant residual N decrease compared to the N treatment while the leached N remained the same. Nevertheless, when the applied zeolites rate was higher (NZ2, the absorbed N by maize was similar to the N treatment while the leached N increased significantly compared to the N and NZ1 treatments, thus showing a late release of N to the soil solution. These results suggest that the synchronization between the pattern of N release from the soil-fertilizer-zeolite system and the N absorption by maize depended on the zeolite rate. While in NZ1 such synchronization improved the performance of the nitrogen fertilizer, in the NZ2 treatment the retained N by the zeolites was not available to maize, being detected as leached N at the end of the experiment.

7. I-TNT: PHONE NUMBER EXPANSION AND TRANSLATION SYSTEM FOR MANAGING INTERCONNECTIVITY ADDRESSING IN SIP PEERING

Directory of Open Access Journals (Sweden)

A. A. KHUDHER

2015-02-01

Full Text Available Voice over IP (VoIP subscribers is growing vastly in the recent years due to the ever increase in smartphones, 3G, WiFi, etc. This growth leads the VoIP service providers to peer with each other through Session Initiation Protocol (SIP peering for low/free cost of voice communication. Naturally, this growth is not without challenges, especially in phone addressing. This paper proposes an I-TNT (Infrastructure-Phone Number Translation numbering system to expand the range of the existing E.164 numbers and mapping between private and public number at the edge of the signalling path. As a result, I-TNT numbering system is successfully implemented and able to allocate the expanded phone numbers to end-users in one service provider.

8. Effect of Tillage Systems with Corn Residue on Grain Yield of Rapeseed in Moghan Region

Directory of Open Access Journals (Sweden)

2014-09-01

Full Text Available This study carried out to evaluate the effect of different tillage systems on rapeseed yield (hayola 401 planted in corn residues. This experiment was done in Moghan region with clay soils during 2009-2012. Different seedbed preparation methods include MT: moldboard + disk tillage (conventional tillage was included, SCT: Stem Crusher + chisel + disk tandem harrow, STT: Stem Crusher + double-disc, CT: chisel + disk tillage and DD: two heavy disks. The experiment was conducted in a randomized complete block design with four replications. The results showed that soil bulk density in the 0-10 cm layer was not significant in different tillage treatments, but it was significantly higher than the conventional tillage in 10-20 cm depth. However, penetration resistance in 10-30 cm under DD was significantly higher than other treatments, but it was not significant in 0-10 cm layer among all tillage treatments. Thus, Comparison of the soil bulk density, penetration resistance, and plant establishment showed that the reduced tillage in canola seedbed preparation was effective. Besides, the surveys indicated that there was a significant different between MWD after primary and secondary tillage. The mean diameter weighted under SCT and DD, were 1.19 and 1.24 cm, respectively had the best status. The highest value and the worst status of this parameter observed for MT which was 1.92 cm. The highest rate of grain yield obtained by application of treatment SCT, and it was 2563.8 kg ha-1, The SCT treatment can be recommended as an effective canola bed preparation due to its significant saving in time and cost after corn harvesting.

9. Fertilizer nitrogen recovery efficiencies in crop production systems of China with and without consideration of the residual effect of nitrogen

International Nuclear Information System (INIS)

Yan, Xiaoyuan; Ti, Chaopu; Zhu, Zhaoliang; Vitousek, Peter; Chen, Deli; Leip, Adrian; Cai, Zucong

2014-01-01

China is the world’s largest consumer of synthetic nitrogen (N), where very low rates of fertilizer N recovery in crops have been reported, raising discussion around whether fertilizer N use can be significantly reduced without yield penalties. However, using recovery rates as indicator ignores a possible residual effect of fertilizer N—a factor often unknown at large scales. Such residual effect might store N in the soil increasing N availability for subsequent crops. The objectives of the present study were therefore to quantify the residual effect of fertilizer N in China and to obtain more realistic rates of the accumulative fertilizer N recovery efficiency (RE) in crop production systems of China. Long-term spatially-extensive data on crop production, fertilizer N and other N inputs to croplands in China were used to analyze the relationship between crop N uptake and fertilizer N input (or total N input), and to estimate the amount of residual fertilizer N. Measurement results of cropland soil N content in two time periods were obtained to compare the change in the soil N pool. At the provincial scale, it was found that there is a linear relationship between crop N uptake and fertilizer N input or total N input. With the increase in fertilizer N input, annual direct fertilizer N RE decreased and was indeed low (below 30% in recent years), while its residual effect increased continuously, to the point that 40–68% of applied fertilizer was used for crop production sooner or later. The residual effect was evidenced by a buildup of soil N and a large difference between nitrogen use efficiencies of long-term and short-term experiments. (paper)

10. How Planting Density Affects Number and Yield of Potato Minitubers in a Commercial Glasshouse Production System

NARCIS (Netherlands)

Veeken, van der A.J.H.; Lommen, W.J.M.

2009-01-01

Commercial potato minituber production systems aim at high tuber numbers per plant. This study investigated by which mechanisms planting density (25.0, 62.5 and 145.8 plants/m2) of in vitro derived plantlets affected minituber yield and minituber number per plantlet. Lowering planting density

11. Three-dimensional pseudo-random number generator for implementing in hybrid computer systems

International Nuclear Information System (INIS)

Ivanov, M.A.; Vasil'ev, N.P.; Voronin, A.V.; Kravtsov, M.Yu.; Maksutov, A.A.; Spiridonov, A.A.; Khudyakova, V.I.; Chugunkov, I.V.

2012-01-01

The algorithm for generating pseudo-random numbers oriented to implementation by using hybrid computer systems is considered. The proposed solution is characterized by a high degree of parallel computing [ru

12. Quantifying the residual volume transport through a multiple-inlet system in response to wind forcing: The case of the western Dutch Wadden Sea

NARCIS (Netherlands)

Duran-Matute, M.; Gerkema, T.; Sassi, M.

2016-01-01

In multiple-inlet coastal systems like the western Dutch Wadden Sea, the tides (and their interaction with the bathymetry), the fresh water discharge, and the wind drive a residual flow through the system. In the current paper, we study the effect of the wind on the residual volume transport through

13. Why Build Dewey Numbers? The Remediation of the Dewey Decimal Classification System

Directory of Open Access Journals (Sweden)

Tore Brattli

2012-10-01

Full Text Available Correct Dewey classification is demanding and time consuming. Many of the challenges with the Dewey system are related to locating and interpreting notes (i.e. classification guidelines, and number building. Today’s Dewey structure is a result of more than 100 years of optimizing a comprehensive classification system to the printed book medium. In order to limit the system into a “manageable” size, facets and facet-like subjects are represented only once and instead referred to from relevant classes for number building. A similar technique is used to reduce the number of notes. With the remediation of Dewey from printed to computer media, space is not limited and there is no need to compress the classification system. Number building can be eliminated, and all relevant notes attached to each class. Despite the fact that the system now has been available in electronic form for almost 20 years, it is still largely a copy of the printed version. This article first investigates how the Dewey system may be presented for users without number building, in order to make it more immediate and user-friendly. We first analyze the Dewey structure, and then look at different representations of the structure suited for computer media. Finally, some ideas for a new presentation without number building are proposed.

14. Nutrient retention capabilities of Nile tilapia ( Oreochromis niloticus) fed bio-regenerative life support system (BLSS) waste residues

Science.gov (United States)

Gonzales, John M.; Brown, Paul B.

Nile tilapia were evaluated as a bio-regenerative sub-process for reducing solid waste potentially encountered in bio-regenerative life support systems. Ten juvenile Nile tilapia (mean weight = 2.05 g) were stocked into triplicate aquaria and fed one of seven experimental diets consisting of vegetable, bacterial, or food waste for a period of seven weeks. Weight gain (g), specific growth rate (mg/d), and daily consumption (g) was significantly higher ( p diet (37.99 and 68.54, respectively) followed by fish fed the wheat bran/wheat germ diet (23.19 and 63.67, respectively). Nitrogen, sulfur, and crude protein retention was significantly higher ( p diet (23.68, 21.89, and 23.68, respectively). A general loss of minerals was observed among all groups. Strong associations were observed between crude lipid retention and sulfur retention ( r2 = 0.94), crude lipid retention and carbon retention ( r2 = 0.92), WG and fiber content of dietary treatments ( r2 = 0.92), WG and carbon retention and ( r2 = 0.88), WG and lysine content of waste residues ( r2 = 0.86), crude protein retention and carbon retention ( r2 = 0.84), sulfur retention and crude protein retention ( r2 = 0.84), and total sulfur amino acid (TSAA) content of residues and WG ( r2 = 0.81). Weaker associations existed between WG and crude lipid retention ( r2 = 0.77), crude fiber content and carbon retention ( r2 = 0.76), and WG and methionine content of waste residues ( r2 = 0.75). Additional research is needed to improve the nutritional quality of fibrous residues as a means to improve tilapia's ability to utilize these residues as a food source in bio-regenerative support systems.

15. Evaluation of certain crop residues for carbohydrate and protein fractions by cornell net carbohydrate and protein system

Directory of Open Access Journals (Sweden)

Venkateswarulu Swarna

2015-06-01

Full Text Available Four locally available crop residues viz., jowar stover (JS, maize stover (MS, red gram straw (RGS and black gram straw (BGS were evaluated for carbohydrate and protein fractions using Cornell Net Carbohydrate and Protein (CNCP system. Lignin (% NDF was higher in legume straws as compared to cereal stovers while Non-structural carbohydrates (NSC (% DM followed the reverse trend. The carbohydrate fractions A and B1 were higher in BGS while B2 was higher in MS as compared to other crop residues. The unavailable cell wall fraction (C was higher in legume straws when compared to cereal stovers. Among protein fractions, B1 was higher in legume straws when compared to cereal stovers while B2 was higher in cereal stovers as compared to legume straws. Fraction B3 largely, bypass protein was highest in MS as compared to other crop residues. Acid detergent insoluble crude protein (ADICP (% CP or unavailable protein fraction C was lowest in MS and highest in BGS. It is concluded that MS is superior in nutritional value for feeding ruminants as compared to other crop residues.

16. Harvest time residues of pendimethalin and oxyfluorfen in vegetables and soil in sugarcane-based intercropping systems.

Science.gov (United States)

Kaur, Navneet; Bhullar, Makhan S

2015-05-01

Terminal residues of pendimethalin and oxyfluorfen applied in autumn sugarcane- and vegetables-based intercropping systems were analyzed in peas (Pisum sativum), cabbage (Brassica oleracea), garlic (Allium sativum), gobhi sarson (Brassica napus), and raya (Brassica juncea). The study was conducted in winter season in 2010-2011 and in 2011-2012 at Ludhiana, India. Pendimethalin at 0.56 kg and 0.75 kg ha(-1) was applied immediately after sowing of gobhi sarson, raya, peas, garlic, and 2 days before transplanting of cabbage seedlings. Oxyfluorfen at 0.17 kg and 0.23 kg ha(-1) was applied immediately after sowing of peas and garlic and 2 days before transplanting of cabbage seedlings intercropped in autumn sugarcane. Representative samples of these vegetables were collected at 75, 90, 100, and 165 days after application of herbicides and analyzed by high-performance liquid chromatograph (HPLC) with diode array detector for residues. The residue level of pendimethalin and oxyfluorfen in mature vegetables was found to be below the limit of quantification which is 0.05 mg kg(-1) for both the herbicides. The soil samples were collected at 0, 7, 15, 30, 45, and 60 days after the application of their herbicides. The residues of herbicides in soil samples were found to be below the detectability limit of 0.05 mg kg(-1) after 60 days in case of pendimethalin and after 45 days in case of oxyfluorfen.

17. On creating macroscopically identical granular systems with different numbers of particles

Science.gov (United States)

van der Meer, Devaraj; Rivas, Nicolas

2015-11-01

One of the fundamental differences between granular and molecular hydrodynamics is the enormous difference in the total number of constituents. The small number of particles implies that the role of fluctuations in granular dynamics is of paramount importance. To obtain more insight in these fluctuations, we investigate to what extent it is possible to create identical granular hydrodynamic states with different number of particles. A definition is given of macroscopically equivalent systems, and the dependency of the conservation equations on the particle size is studied. We show that, in certain cases, and by appropriately scaling the microscopic variables, we are able to compare systems with significantly different number of particles that present the same macroscopic phenomenology. We apply these scalings in simulations of a vertically vibrated system, namely the density inverted granular Leidenfrost state and its transition to a buoyancy-driven convective state.

18. REST: a computer system for estimating logging residue by using the line-intersect method

Science.gov (United States)

A. Jeff Martin

1975-01-01

A computer program was designed to accept logging-residue measurements obtained by line-intersect sampling and transform them into summaries useful for the land manager. The features of the program, along with inputs and outputs, are briefly described, with a note on machine compatibility.

19. Formation of residual NAPL in three-phase systems: Experiments and numerical simulations

NARCIS (Netherlands)

Hofstee, C.; Oostrom, M.

2002-01-01

The formation of residual, discontinuous nonaqueous phase liquids (NAPLs) in the vadose zone is a process that is not well understood. The simulators have conveniently implemented the Leverett concept (Leverett and Lewis, 1941) which states that in a water-wet porous media, when fluid wettabilities

20. Behaviour of phenyl-urea type herbicides and related chemical residues in soil-plant systems

International Nuclear Information System (INIS)

Suess, A.; Eben, C.

1975-01-01

Uniformly 14 C-labelled aniline derivatives were used to indicate the degradation of phenyl-urea type herbicides. The results suggested cleavage of the benzene ring when present as a soil residue, cleavage apparently being reduced by increased chlorination of the ring. (author)

1. Scalar position in cochlear implant surgery and outcome in residual hearing and the vestibular system.

Science.gov (United States)

Nordfalk, Karl Fredrik; Rasmussen, Kjell; Hopp, Einar; Greisiger, Ralf; Jablonski, Greg Eigner

2014-02-01

To evaluate the effect of the intracochlear electrode position on the residual hearing and VNG- and cVEMP responses. Prospective pilot study. Thirteen adult patients who underwent unilateral cochlear implant surgery were examined with high-resolution rotational tomography after cochlear implantation. All subjects were also tested with VNG, and 12 of the subjects were tested with cVEMP and audiometry before and after surgery. We found that although the electrode was originally planned to be positioned inside the scala tympani, only 8 of 13 had full insertion into the scala tympani. Loss of cVEMP response occurred to the same extent in the group with full scala tympani positioning and the group with scala vestibuli involvement. There was a non-significant difference in the loss of caloric response and residual hearing between the two groups. Interscalar dislocation of the electrode inside the cochlea was observed in two patients. A higher loss of residual hearing could be seen in the group with electrode dislocation between the scalae. Our findings indicate that intracochlear electrode dislocation is a possible cause to loss of residual hearing during cochlear implantation but cannot be the sole cause of postoperative vestibular loss.

2. Design of a Content Addressable Memory-based Parallel Processor implementing (−1+j)-based Binary Number System

OpenAIRE

Tariq Jamil

2014-01-01

Contrary to the traditional base 2 binary number system, used in today’s computers, in which a complex number is represented by two separate binary entities, one for the real part and one for the imaginary part, Complex Binary Number System (CBNS), a binary number system with base (−1+j), is used to represent a given complex number in single binary string format. In this paper, CBNS is reviewed and arithmetic algorithms for this number system are presented. The design of ...

3. Role of Hot Water System Design on Factors Influential to Pathogen Regrowth: Temperature, Chlorine Residual, Hydrogen Evolution, and Sediment

OpenAIRE

Brazeau, Randi H.; Edwards, Marc A.

2013-01-01

Residential water heating is linked to growth of pathogens in premise plumbing, which is the primary source of waterborne disease in the United States. Temperature and disinfectant residual are critical factors controlling increased concentration of pathogens, but understanding of how each factor varies in different water heater configurations is lacking. A direct comparative study of electric water heater systems was conducted to evaluate temporal variations in temperature and water quality ...

4. On the Maximum Number of Periodical Solutions of a Class of Autonomous Systems

International Nuclear Information System (INIS)

Raeva, M.

2008-01-01

The autonomous systems are investigated on a certain condition, assuming the existence of inner resonances. Nonlinear parts are polynomials of a certain class. The present article is a continuation of the last one, which was published by American Institute of Physics, New York in 2007. We are interested both in the existence and the number of periodical trajectories of the system with initial conditions.

5. Determining the number of kanbans for dynamic production systems: An integrated methodology

Directory of Open Access Journals (Sweden)

Özlem Uzun Araz

2016-08-01

Full Text Available Just-in-time (JIT is a management philosophy that reduces the inventory levels and eliminates manufacturing wastes by producing only the right quantity at the right time. A kanban system is one of the key elements of JIT philosophy. Kanbans are used to authorize production and to control movement of materials in JIT systems. In Kanban systems, the efficiency of the manufacturing system depends on several factors such as number of kanbans, container size etc. Hence, determining the number of kanbans is a critical decision in Kanban systems. The aim of this study is to develop a methodology that can be used in order to determine the number of kanbans in a dynamic production environment. In this methodology, the changes in system state is monitored in real time manner, and the number of the kanbans are dynamically re-arranged. The proposed methodology integrates simulation, neural networks and Mamdani type fuzzy inference system. The methodology is modelled in simulation environment and applied on a hypothetic production system. We also performed several comparisons for different control policies to show the effectiveness of the proposed methodology.

6. Power Assigning Method for Increasing the Number of Users in Time-spreading Optical CDMA Systems

Science.gov (United States)

Salehi, Mohammad Reza; Abiri, Ebrahim; Kazemi, Keyvan; Dezfouli, Mehran

2011-04-01

In this paper, a method for increasing the number of supportable users in a time-spreading Optical code division multiple access (OCDMA) system is proposed. In the presented technique, a unique codeword is assigned to a couple of users instead of just one. Different optical powers are employed for such users in order to distinguish them from each other. Other methods use the frequency or the polarization of the optical signals as an additional coding dimension to increase the number of codewords and hence the number of users in the network. It is proposed to employ nonlinear optical regenerators for separating optical pulses with different powers. A comprehensive design algorithm for such regenerators is presented. In order to evaluate the performance of the designed regenerators a TS-OCDMA system is simulated using OptiSystem software. Results indicate an error free transmission in the system employing the proposed technique.

7. A Traveller Information System: Minimisation of the Number of Graphs’ Nodes Involved When Processing Route Requests

Directory of Open Access Journals (Sweden)

Bendaoud Zakaria

2014-12-01

Full Text Available The number of people using public transport is continuously increasing. Transport companies want to fulfil travellers’ expectations wherever possible. However, the great number of public transport companies operating in the same area can sometimes confuse travellers as to which route they should take and how to obtain the information relative to their journey. In this paper we suggest integrating several traveller information systems from different companies into the same multimodal information system, offering companies the choice not to share their data. This encourages them to join the system. Additionally, we have minimised the number of nodes involved when processing travellers’ requests in order to simplify the calculation process. To put our plan into action, we have opted for a multi-agent system coupled with the Voronoi decomposition for managing the network.

8. Symbolic Number Comparison Is Not Processed by the Analog Number System: Different Symbolic and Non-symbolic Numerical Distance and Size Effects.

Science.gov (United States)

Krajcsi, Attila; Lengyel, Gábor; Kojouharova, Petia

2018-01-01

HIGHLIGHTS We test whether symbolic number comparison is handled by an analog noisy system.Analog system model has systematic biases in describing symbolic number comparison.This suggests that symbolic and non-symbolic numbers are processed by different systems. Dominant numerical cognition models suppose that both symbolic and non-symbolic numbers are processed by the Analog Number System (ANS) working according to Weber's law. It was proposed that in a number comparison task the numerical distance and size effects reflect a ratio-based performance which is the sign of the ANS activation. However, increasing number of findings and alternative models propose that symbolic and non-symbolic numbers might be processed by different representations. Importantly, alternative explanations may offer similar predictions to the ANS prediction, therefore, former evidence usually utilizing only the goodness of fit of the ANS prediction is not sufficient to support the ANS account. To test the ANS model more rigorously, a more extensive test is offered here. Several properties of the ANS predictions for the error rates, reaction times, and diffusion model drift rates were systematically analyzed in both non-symbolic dot comparison and symbolic Indo-Arabic comparison tasks. It was consistently found that while the ANS model's prediction is relatively good for the non-symbolic dot comparison, its prediction is poorer and systematically biased for the symbolic Indo-Arabic comparison. We conclude that only non-symbolic comparison is supported by the ANS, and symbolic number comparisons are processed by other representation.

9. Carbon balance and crop residue management in dynamic equilibrium under a no-till system in Campos Gerais

Directory of Open Access Journals (Sweden)

2012-11-01

Full Text Available The adoption of no-tillage systems (NT and the maintenance of crop residues on the soil surface result in the long-term increase of carbon (C in the system, promoting C sequestration and reducing C-CO2 emissions to the atmosphere. The purpose of this study was to evaluate the C sequestration rate and the minimum amount of crop residues required to maintain the dynamic C equilibrium (dC/dt = 0 of two soils (Typic Hapludox with different textural classes. The experiment was arranged in a 2 x 2 x 2 randomized block factorial design. The following factors were analyzed: (a two soil types: Typic Hapludox (Oxisol with medium texture (LVTM and Oxisol with clay texture (LVTA, (b two sampling layers (0-5 and 5-20 cm, and (c two sampling periods (P1 - October 2007; P2 - September 2008. Samples were collected from fields under a long-term (20 years NT system with the following crop rotations: wheat/soybean/black oat + vetch/maize (LVTM and wheat/maize/black oat + vetch/soybean (LVTA. The annual C sequestration rates were 0.83 and 0.76 Mg ha-1 for LVTM and LVTA, respectively. The estimates of the minimum amount of crop residues required to maintain a dynamic equilibrium (dC/dt = 0 were 7.13 and 6.53 Mg ha-1 year-1 for LVTM and LVTA, respectively. The C conversion rate in both studied soils was lower than that reported in other studies in the region, resulting in a greater amount of crop residues left on the soil surface.

10. A Chaotic System with an Infinite Number of Equilibrium Points: Dynamics, Horseshoe, and Synchronization

Directory of Open Access Journals (Sweden)

Viet-Thanh Pham

2016-01-01

Full Text Available Discovering systems with hidden attractors is a challenging topic which has received considerable interest of the scientific community recently. This work introduces a new chaotic system having hidden chaotic attractors with an infinite number of equilibrium points. We have studied dynamical properties of such special system via equilibrium analysis, bifurcation diagram, and maximal Lyapunov exponents. In order to confirm the system’s chaotic behavior, the findings of topological horseshoes for the system are presented. In addition, the possibility of synchronization of two new chaotic systems with infinite equilibria is investigated by using adaptive control.

11. Evaluation of an Anaerobic Digestion System for Processing CELSS Crop Residues for Resource Recovery

Science.gov (United States)

Strayer, R. F.; Finger, B. W.; Alazraki, M. P.

1997-01-01

Three bioreactors, connected in series, were used to process CELSS potato residues for recovery of resources. The first stage was an anaerobic digestor (8 L working volume; cow rumen contents inoculum; fed-batch; 8 day retention time; feed rate 25 gdw/day) that converted 33% of feed (dry weight loss) to CO2 and "volatile fatty acids" (vfa, 83:8:8 mmolar ratio acetic:propionic:butyric). High nitrate-N in the potato residue feed was absent in the anaerobic effluent, with a high portion converted to NH4(+)-N and the remainder unaccounted and probably lost to denitrification and NH4(+) volatilization. Liquid anaerobic effluent was fed to an aerobic, yeast biomass production vessel (2 L volume; Candida ingens inoculum; batch [pellicle] growth; 2 day retention time) where the VFAs and some NH4(+)-N were converted into yeast biomass. Yeast yields accounted for up to 8% of potato residue fed into the anaerobic bioreactor. The third bioreactor (0.5 L liquid working volume; commercial nitrifier inoculum; packed-bed biofilm; continuous yeast effluent feed; recirculating; constant volume; 2 day hydraulic retention time) was used to convert successfully the remaining NH4(+)-N into nitrate-N (preferred form of N for CELSS crop production) and to remove the remaining degradable soluble organic carbon. Effluents from the last two stages were used for partial replenishment of minerals for hydroponic potato production.

12. Quantum dynamics for classical systems with applications of the number operator

CERN Document Server

Bagarello, Fabio

2013-01-01

Mathematics is increasingly applied to classical problems in finance, biology, economics, and elsewhere. Quantum Dynamics for Classical Systems describes how quantum tools—the number operator in particular—can be used to create dynamical systems in which the variables are operator-valued functions and whose results explain the presented model. The book presents mathematical results and their applications to concrete systems and discusses the methods used, results obtained, and techniques developed for the proofs of the results. The central ideas of number operators are illuminated while avoiding excessive technicalities that are unnecessary for understanding and learning the various mathematical applications. The presented dynamical systems address a variety of contexts and offer clear analyses and explanations of concluded results. Additional features in Quantum Dynamics for Classical Systems include: Applications across diverse fields including stock markets and population migration as well as a uniqu...

13. Effect of Residual Stresses and Prediction of Possible Failure Mechanisms on Thermal Barrier Coating System by Finite Element Method

Science.gov (United States)

Ranjbar-Far, M.; Absi, J.; Mariaux, G.; Shahidi, S.

2010-09-01

This work is focused on the effect of the residual stresses resulting from the coating process and thermal cycling on the failure mechanisms within the thermal barrier coating (TBC) system. To reach this objective, we studied the effect of the substrate preheating and cooling rate on the coating process conditions. A new thermomechanical finite element model (FEM) considering a nonhomogeneous temperature distribution has been developed. In the results, we observed a critical stress corresponding to a low substrate temperature and high cooling rate during spraying of the top-coat material. Moreover, the analysis of the stress distribution after service shows that more critical stresses are obtained in the case where residual stresses are taken into account.

14. Residual gas analysis

International Nuclear Information System (INIS)

Berecz, I.

1982-01-01

Determination of the residual gas composition in vacuum systems by a special mass spectrometric method was presented. The quadrupole mass spectrometer (QMS) and its application in thin film technology was discussed. Results, partial pressure versus time curves as well as the line spectra of the residual gases in case of the vaporization of a Ti-Pd-Au alloy were demonstrated together with the possible construction schemes of QMS residual gas analysers. (Sz.J.)

15. Analysis of plastic residues in maple sap and syrup collected from tubing systems sanitized with isopropyl alcohol.

Science.gov (United States)

Lagacé, Luc; Charron, Carmen; Sadiki, Mustapha

2017-05-01

A plastic tubing system operated under vacuum is usually used to collect sap from maple trees during spring time to produce maple syrup. This system is commonly sanitized with isopropyl alcohol (IPA) to remove microbial contamination colonizing the system during the sugar season. Questions have been raised whether IPA would contribute to the leaching of plastic residues in maple sap and syrup coming from sanitized systems. First, an extraction experiment was performed in the lab on commercial plastic tubing materials that were submitted to IPA under harsh conditions. The results of the GC-MS analysis revealed the presence of many compounds that served has target for further tests. Secondly, tests were done on early and mid-season maple sap and syrup coming from many sugarbushes using IPA or not to determine potential concentrations of plastic residues. Results obtained from sap and syrup samples showed that no quantifiable (syrup and reinforced the need to thoroughly rinse the tubing system at the beginning of the season for both sanitized and non sanitized systems.

16. Adaptive synchronization of fractional Lorenz systems using a reduced number of control signals and parameters

International Nuclear Information System (INIS)

Aguila-Camacho, Norelys; Duarte-Mermoud, Manuel A.; Delgado-Aguilera, Efredy

2016-01-01

This paper analyzes the synchronization of two fractional Lorenz systems in two cases: the first one considering fractional Lorenz systems with unknown parameters, and the second one considering known upper bounds on some of the fractional Lorenz systems parameters. The proposed control strategies use a reduced number of control signals and control parameters, employing mild assumptions. The stability of the synchronization errors is analytically demonstrated in all cases, and the convergence to zero of the synchronization errors is analytically proved in the case when the upper bounds on some system parameters are assumed to be known. Simulation studies are presented, which allows verifying the effectiveness of the proposed control strategies.

17. Research on the optimal dynamical systems of three-dimensional Navier-Stokes equations based on weighted residual

Science.gov (United States)

Peng, NaiFu; Guan, Hui; Wu, ChuiJie

2016-04-01

In this paper, the theory of constructing optimal dynamical systems based on weighted residual presented by Wu & Sha is applied to three-dimensional Navier-Stokes equations, and the optimal dynamical system modeling equations are derived. Then the multiscale global optimization method based on coarse graining analysis is presented, by which a set of approximate global optimal bases is directly obtained from Navier-Stokes equations and the construction of optimal dynamical systems is realized. The optimal bases show good properties, such as showing the physical properties of complex flows and the turbulent vortex structures, being intrinsic to real physical problem and dynamical systems, and having scaling symmetry in mathematics, etc.. In conclusion, using fewer terms of optimal bases will approach the exact solutions of Navier-Stokes equations, and the dynamical systems based on them show the most optimal behavior.

18. Novel in vitro systems for prediction of veterinary drug residues in ovine milk and dairy products.

Science.gov (United States)

González-Lobato, L; Real, R; Herrero, D; de la Fuente, A; Prieto, J G; Marqués, M M; Alvarez, A I; Merino, G

2014-01-01

A new in vitro tool was developed for the identification of veterinary substrates of the main drug transporter in the mammary gland. These drugs have a much higher chance of being concentrated into ovine milk and thus should be detectable in dairy products. Complementarily, a cell model for the identification of compounds that can inhibit the secretion of drugs into ovine milk, and thus reduce milk residues, was also generated. The ATP-binding cassette transporter G2 (ABCG2) is responsible for the concentration of its substrates into milk. The need to predict potential drug residues in ruminant milk has prompted the development of in vitro cell models over-expressing ABCG2 for these species to detect veterinary drugs that interact with this transporter. Using these models, several substrates for bovine and caprine ABCG2 have been found, and differences in activity between species have been reported. However, despite being of great toxicological relevance, no suitable in vitro model to predict substrates of ovine ABCG2 was available. New MDCKII and MEF3.8 cell models over-expressing ovine ABCG2 were generated for the identification of substrates and inhibitors of ovine ABCG2. Five widely used veterinary antibiotics (marbofloxacin, orbifloxacin, sarafloxacin, danofloxacin and difloxacin) were discovered as new substrates of ovine ABCG2. These results were confirmed for the bovine transporter and its Y581S variant using previously generated cell models. In addition, the avermectin doramectin was described as a new inhibitor of ruminant ABCG2. This new rapid assay to identify veterinary drugs that can be concentrated into ovine milk will potentially improve detection and monitoring of veterinary drug residues in ovine milk and dairy products.

19. Development of gasification and melting system for energy recovery from automobile shredder residue

International Nuclear Information System (INIS)

Jung, Hae Young; Seo, Yong Chil; Cho, Sung Jin; Lee, Jang Su; Lee, Ki Bae; Jeong, Dae Woon; Kim, Woo Hyun; Roh, Seon Ah; Min, Tai Jin

2010-01-01

As one of the efforts to increase recycling rate of end of life vehicles enforcing by the governmental regulation, automobile shredder residue (ASR) was considered to treat by a thermal method with converting waste to energy. Gasification and melting experimental processes of lab (1 kg/ hour) and pilot (5 ton/ day) scale were installed. ASR collected from a domestic shredding company was experimented at a lab-scale and pilot-scale gasification and melting process which is similar to the shaft type gasification melting furnace. The characteristics of syngas, tar and residue (slag) generated from a conversion process (gasification and melting) were analyzed to provide the information to further utilize them as fuel and recyclable materials in scaled up plants. A series of experiments have been conducted with various air equivalent ratios (ERs), and syngas compositions, carbon conversion efficiency, heating value of syngas, yield and characteristics of slag were analyzed. Finally, slags generated from the process were recycled with various alternative technologies. In summary, energy conversion technology of ASR with the least production of residue by gasification and slag utilization has been developed. The main components in product gas were H 2 , CO, CH 4 and CO 2 ; and concentrations of C 2 H 4 and C 2 H 6 were less. This can be used as clean fuel gas whose heating value ranged from 2.5 to 14.0 MJ/ m 3 . Most of slag generated from the process can further be fabricated to valuable and usable products. Such combined technology would result in achieving almost zero waste release from ELVs. (author)

20. Application of Ultrasound in a Closed System: Optimum Condition for Antioxidants Extraction of Blackberry (Rubus fructicosus) Residues.

Science.gov (United States)

Zafra-Rojas, Quinatzin Y; Cruz-Cansino, Nelly S; Quintero-Lira, Aurora; Gómez-Aldapa, Carlos A; Alanís-García, Ernesto; Cervantes-Elizarrarás, Alicia; Güemes-Vera, Norma; Ramírez-Moreno, Esther

2016-07-21

Blackberry processing generates up to 20% of residues composed mainly of peel, seeds and pulp that are abundant in flavonoids. The objective of this study was to optimize the ultrasound conditions, in a closed system, for antioxidants extraction, using the response surface methodology. Blackberry (Rubus fructicosus) residues were analyzed for total phenolics, total anthocyanins, and antioxidant activity by ABTS and DPPH. The selected independent variables were ultrasound amplitude (X₁: 80%-90%) and extraction time (X₂: 10-15 min), and results were compared with conventional extraction methods. The optimal conditions for antioxidants extraction were 91% amplitude for 15 min. The results for total phenolic content and anthocyanins and antioxidant activity by ABTS and DPPH were of 1201.23 mg gallic acid equivalent (GAE)/100 g dry weight basis (dw); 379.12 mg/100 g·dw; 6318.98 µmol Trolox equivalent (TE)/100 g·dw and 9617.22 µmol TE/100 g·dw, respectively. Compared to solvent extraction methods (water and ethanol), ultrasound achieved higher extraction of all compounds except for anthocyanins. The results obtained demonstrated that ultrasound is an alternative to improve extraction yield of antioxidants from fruit residues such as blackberry.

1. Application of Ultrasound in a Closed System: Optimum Condition for Antioxidants Extraction of Blackberry (Rubus fructicosus Residues

Directory of Open Access Journals (Sweden)

Quinatzin Y. Zafra-Rojas

2016-07-01

Full Text Available Blackberry processing generates up to 20% of residues composed mainly of peel, seeds and pulp that are abundant in flavonoids. The objective of this study was to optimize the ultrasound conditions, in a closed system, for antioxidants extraction, using the response surface methodology. Blackberry (Rubus fructicosus residues were analyzed for total phenolics, total anthocyanins, and antioxidant activity by ABTS and DPPH. The selected independent variables were ultrasound amplitude (X1: 80%–90% and extraction time (X2: 10–15 min, and results were compared with conventional extraction methods. The optimal conditions for antioxidants extraction were 91% amplitude for 15 min. The results for total phenolic content and anthocyanins and antioxidant activity by ABTS and DPPH were of 1201.23 mg gallic acid equivalent (GAE/100 g dry weight basis (dw; 379.12 mg/100 g·dw; 6318.98 µmol Trolox equivalent (TE/100 g·dw and 9617.22 µmol TE/100 g·dw, respectively. Compared to solvent extraction methods (water and ethanol, ultrasound achieved higher extraction of all compounds except for anthocyanins. The results obtained demonstrated that ultrasound is an alternative to improve extraction yield of antioxidants from fruit residues such as blackberry.

2. Crop residue management in arable cropping systems under a temperate climate. Part 2: Soil physical properties and crop production. A review

Directory of Open Access Journals (Sweden)

Hiel, MP.

2016-01-01

Full Text Available Introduction. Residues of previous crops provide a valuable amount of organic matter that can be used either to restore soil fertility or for external use. A better understanding of the impact of crop residue management on the soil-water-plant system is needed in order to manage agricultural land sustainably. This review focuses on soil physical aspects related to crop residue management, and specifically on the link between soil structure and hydraulic properties and its impact on crop production. Literature. Conservation practices, including crop residue retention and non-conventional tillage, can enhance soil health by improving aggregate stability. In this case, water infiltration is facilitated, resulting in an increase in plant water availability. Conservation practices, however, do not systematically lead to higher water availability for the plant. The influence of crop residue management on crop production is still unclear; in some cases, crop production is enhanced by residue retention, but in others crop residues can reduce crop yield. Conclusions. In this review we discuss the diverse and contrasting effects of crop residue management on soil physical properties and crop production under a temperate climate. The review highlights the importance of environmental factors such as soil type and local climatic conditions, highlighting the need to perform field studies on crop residue management and relate them to specific pedo-climatic contexts.

3. The role of numeracy and approximate number system acuity in predicting value and probability distortion.

Science.gov (United States)

Patalano, Andrea L; Saltiel, Jason R; Machlin, Laura; Barth, Hilary

2015-12-01

It is well documented that individuals distort outcome values and probabilities when making choices from descriptions, and there is evidence of systematic individual differences in distortion. In the present study, we investigated the relationship between individual differences in such distortions and two measures of numerical competence, numeracy and approximate number system (ANS) acuity. Participants indicated certainty equivalents for a series of simple monetary gambles, and data were used to estimate individual-level value and probability distortion, using a cumulative prospect theory framework. We found moderately strong negative correlations between numeracy and value and probability distortion, but only weak and non-statistically reliable correlations between ANS acuity and distortions. We conclude that low numeracy contributes to number distortion in decision making, but that approximate number system acuity might not underlie this relationship.

4. Four Complete Datatype Defining Rewrite Systems for an Abstract Datatype of Natural Numbers

NARCIS (Netherlands)

Bergstra, J.A.

2014-01-01

Natural numbers with zero, one, successor, addition and multiplication, constitute a classic example of an abstract datatype amenable for equational initial algebra specification. Datatype defining rewrite systems provide a specification which at the same time is a complete, that is confluent and

5. Number of solutions of systems of homogeneous polynomial equations over finite fields

DEFF Research Database (Denmark)

2017-01-01

We consider the problem of determining the maximum number of common zeros in a projective space over a finite field for a system of linearly independent multivariate homogeneous polynomials defined over that field. There is an elaborate conjecture of Tsfasman and Boguslavsky that predicts the max...

6. Choosing the number of readout systems of a photoelectric angle converter

Energy Technology Data Exchange (ETDEWEB)

Latyev, S.M.; Mitrofanov, S.S. [Institute of Precision Mechanics and Optics, St. Petersburg (Russian Federation)

1994-09-01

This paper discusses certain errors of photoelectric angle converters whose effect can be lessened by making the best choice of the number of readout systems and of their definite mutual placement. Recommendations are given for compensating the systematic and random errors of a converter. 4 refs.

7. Choosing the number of readout systems of a photoelectric angle converter

Science.gov (United States)

Latyev, S. M.; Mitrofanov, S. S.

1994-09-01

This paper discusses certain errors of photoelectric angle converters whose effect can be lessened by making the best choice of the number of readout systems and of their definite mutual placement. Recommendations are given for compensating the systematic and random errors of a converter.

8. Operability test report for rotary mode core sampling system number 3

International Nuclear Information System (INIS)

Corbett, J.E.

1996-01-01

This report documents the successful completion of operability testing for the Rotary Mode Core Sampling (RMCS) system number-sign 3. The Report includes the test procedure (WHC-SD-WM-OTP-174), exception resolutions, data sheets, and a test report summary

9. The Nonlinear Relations of the Approximate Number System and Mathematical Language to Early Mathematics Development

Science.gov (United States)

Purpura, David J.; Logan, Jessica A. R.

2015-01-01

Both mathematical language and the approximate number system (ANS) have been identified as strong predictors of early mathematics performance. Yet, these relations may be different depending on a child's developmental level. The purpose of this study was to evaluate the relations between these domains across different levels of ability.…

10. Teaching of Real Numbers by Using the Archimedes-Cantor Approach and Computer Algebra Systems

Science.gov (United States)

Vorob'ev, Evgenii M.

2015-01-01

Computer technologies and especially computer algebra systems (CAS) allow students to overcome some of the difficulties they encounter in the study of real numbers. The teaching of calculus can be considerably more effective with the use of CAS provided the didactics of the discipline makes it possible to reveal the full computational potential of…

11. Quadratic residues and non-residues selected topics

CERN Document Server

Wright, Steve

2016-01-01

This book offers an account of the classical theory of quadratic residues and non-residues with the goal of using that theory as a lens through which to view the development of some of the fundamental methods employed in modern elementary, algebraic, and analytic number theory. The first three chapters present some basic facts and the history of quadratic residues and non-residues and discuss various proofs of the Law of Quadratic Reciprosity in depth, with an emphasis on the six proofs that Gauss published. The remaining seven chapters explore some interesting applications of the Law of Quadratic Reciprocity, prove some results concerning the distribution and arithmetic structure of quadratic residues and non-residues, provide a detailed proof of Dirichlet’s Class-Number Formula, and discuss the question of whether quadratic residues are randomly distributed. The text is a valuable resource for graduate and advanced undergraduate students as well as for mathematicians interested in number theory.

12. Detection of antibiotic residues in bovine milk by a voltammetric electronic tongue system

International Nuclear Information System (INIS)

Wei Zhenbo; Wang Jun

2011-01-01

A voltammetric electronic tongue (VE-tongue) was developed to detect antibiotic residues in bovine milk. Six antibiotics (Chloramphenicol, Erythromycin, Kanamycin sulfate, Neomycin sulfate, Streptomycin sulfate and Tetracycline HCl) spiked at four different concentration levels (0.5, 1, 1.5 and 2 maximum residue limits (MRLs)) were classified based on VE-tongue by two pattern recognition methods: principal component analysis (PCA) and discriminant function analysis (DFA). The VE-tongue was composed of five working electrodes (gold, silver, platinum, palladium, and titanium) positioned in a standard three-electrode configuration. The Multi-frequency large amplitude pulse voltammetry (MLAPV) which consisted of four segments (1 Hz, 10 Hz, 100 Hz and 1000 Hz) was applied as potential waveform. The six antibiotics at the MRLs could not be separated from bovine milk completely by PCA, but all the samples were demarcated clearly by DFA. Three regression models: Principal Component Regression Analysis (PCR), Partial Least Squares Regression (PLSR), and Least Squares-Support Vector Machines (LS-SVM) were used for concentrations of antibiotics prediction. All the regression models performed well, and PCR had the most stable results.

13. Detection of antibiotic residues in bovine milk by a voltammetric electronic tongue system

Energy Technology Data Exchange (ETDEWEB)

Wei Zhenbo [Zhejiang University, Department of Bio-Systems Engineering, 268 Kaixuan Road, Hangzhou, Zhejiang 310029 (China); Wang Jun, E-mail: jwang@zju.edu.cn [Zhejiang University, Department of Bio-Systems Engineering, 268 Kaixuan Road, Hangzhou, Zhejiang 310029 (China)

2011-05-23

A voltammetric electronic tongue (VE-tongue) was developed to detect antibiotic residues in bovine milk. Six antibiotics (Chloramphenicol, Erythromycin, Kanamycin sulfate, Neomycin sulfate, Streptomycin sulfate and Tetracycline HCl) spiked at four different concentration levels (0.5, 1, 1.5 and 2 maximum residue limits (MRLs)) were classified based on VE-tongue by two pattern recognition methods: principal component analysis (PCA) and discriminant function analysis (DFA). The VE-tongue was composed of five working electrodes (gold, silver, platinum, palladium, and titanium) positioned in a standard three-electrode configuration. The Multi-frequency large amplitude pulse voltammetry (MLAPV) which consisted of four segments (1 Hz, 10 Hz, 100 Hz and 1000 Hz) was applied as potential waveform. The six antibiotics at the MRLs could not be separated from bovine milk completely by PCA, but all the samples were demarcated clearly by DFA. Three regression models: Principal Component Regression Analysis (PCR), Partial Least Squares Regression (PLSR), and Least Squares-Support Vector Machines (LS-SVM) were used for concentrations of antibiotics prediction. All the regression models performed well, and PCR had the most stable results.

14. Residuation theory

CERN Document Server

Blyth, T S; Sneddon, I N; Stark, M

1972-01-01

Residuation Theory aims to contribute to literature in the field of ordered algebraic structures, especially on the subject of residual mappings. The book is divided into three chapters. Chapter 1 focuses on ordered sets; directed sets; semilattices; lattices; and complete lattices. Chapter 2 tackles Baer rings; Baer semigroups; Foulis semigroups; residual mappings; the notion of involution; and Boolean algebras. Chapter 3 covers residuated groupoids and semigroups; group homomorphic and isotone homomorphic Boolean images of ordered semigroups; Dubreil-Jacotin and Brouwer semigroups; and loli

15. Symbolic Number Comparison Is Not Processed by the Analog Number System: Different Symbolic and Non-symbolic Numerical Distance and Size Effects

Directory of Open Access Journals (Sweden)

Attila Krajcsi

2018-02-01

Full Text Available HIGHLIGHTSWe test whether symbolic number comparison is handled by an analog noisy system.Analog system model has systematic biases in describing symbolic number comparison.This suggests that symbolic and non-symbolic numbers are processed by different systems.Dominant numerical cognition models suppose that both symbolic and non-symbolic numbers are processed by the Analog Number System (ANS working according to Weber's law. It was proposed that in a number comparison task the numerical distance and size effects reflect a ratio-based performance which is the sign of the ANS activation. However, increasing number of findings and alternative models propose that symbolic and non-symbolic numbers might be processed by different representations. Importantly, alternative explanations may offer similar predictions to the ANS prediction, therefore, former evidence usually utilizing only the goodness of fit of the ANS prediction is not sufficient to support the ANS account. To test the ANS model more rigorously, a more extensive test is offered here. Several properties of the ANS predictions for the error rates, reaction times, and diffusion model drift rates were systematically analyzed in both non-symbolic dot comparison and symbolic Indo-Arabic comparison tasks. It was consistently found that while the ANS model's prediction is relatively good for the non-symbolic dot comparison, its prediction is poorer and systematically biased for the symbolic Indo-Arabic comparison. We conclude that only non-symbolic comparison is supported by the ANS, and symbolic number comparisons are processed by other representation.

16. Computational Analysis of Igbo Numerals in a Number-to-text Conversion System

Directory of Open Access Journals (Sweden)

Olufemi Deborah NINAN

2017-12-01

Full Text Available System for converting Arabic numerals to their textual equivalence is an important tool in Natural Language processing (NLP especially in high-level speech processing and machine translation. Such system is scarcely available for most African languages including the Igbo language. This translation system is essential as Igbo language is one of the three major Nigerian languages feared to be among the endangered African languages. The system was designed using sequence as well as activity diagram and implemented using the python programming language and PyQt. The qualitative evaluation was done by administering questionnaires to selected native Igbo speakers and experts to provide preferred representation of some random numbers. The responses were compared with the output of the system. The result of the qualitative evaluation showed that the system was able to generate correct and accurate representations for Arabic numbers between 1-1000 in Igbo language being the scope of this study. The resulting system can serve as an effective teaching and learning tool of the Igbo language.

17. Qualification of a Method to Calculate the Irrecoverable Pressure Loss in High Reynolds Number Piping Systems

Energy Technology Data Exchange (ETDEWEB)

Sigg, K. C.; Coffield, R. D.

2002-09-01

High Reynolds number test data has recently been reported for both single and multiple piping elbow design configurations at earlier ASME Fluid Engineering Division conferences. The data of these studies ranged up to a Reynolds number of 42 x 10[sup]6 which is significantly greater than that used to establish design correlations before the data was available. Many of the accepted design correlations, based on the lower Reynolds number data, date back as much as fifty years. The new data shows that these earlier correlations are extremely conservative for high Reynolds number applications. Based on the recent high Reynolds number information a new recommended method has been developed for calculating irrecoverable pressure loses in piping systems for design considerations such as establishing pump sizing requirements. This paper describes the recommended design approach and additional testing that has been performed as part of the qualification of the method. This qualification testing determined the irrecoverable pressure loss of a piping configuration that would typify a limiting piping section in a complicated piping network, i.e., multiple, tightly coupled, out-of-plane elbows in series under high Reynolds number flow conditions. The overall pressure loss measurements were then compared to predictions, which used the new methodology to assure that conservative estimates for the pressure loss (of the type used for pump sizing) were obtained. The recommended design methodology, the qualification testing and the comparison between the predictions and the test data are presented. A major conclusion of this study is that the recommended method for calculating irrecoverable pressure loss in piping systems is conservative yet significantly lower than predicted by early design correlations that were based on the extrapolation of low Reynolds number test data.

18. Qualification of a Method to Calculate the Irrecoverable Pressure Loss in High Reynolds Number Piping Systems

International Nuclear Information System (INIS)

Sigg, K. C.; Coffield, R. D.

2002-01-01

High Reynolds number test data has recently been reported for both single and multiple piping elbow design configurations at earlier ASME Fluid Engineering Division conferences. The data of these studies ranged up to a Reynolds number of 42 x 10[sup]6 which is significantly greater than that used to establish design correlations before the data was available. Many of the accepted design correlations, based on the lower Reynolds number data, date back as much as fifty years. The new data shows that these earlier correlations are extremely conservative for high Reynolds number applications. Based on the recent high Reynolds number information a new recommended method has been developed for calculating irrecoverable pressure loses in piping systems for design considerations such as establishing pump sizing requirements. This paper describes the recommended design approach and additional testing that has been performed as part of the qualification of the method. This qualification testing determined the irrecoverable pressure loss of a piping configuration that would typify a limiting piping section in a complicated piping network, i.e., multiple, tightly coupled, out-of-plane elbows in series under high Reynolds number flow conditions. The overall pressure loss measurements were then compared to predictions, which used the new methodology to assure that conservative estimates for the pressure loss (of the type used for pump sizing) were obtained. The recommended design methodology, the qualification testing and the comparison between the predictions and the test data are presented. A major conclusion of this study is that the recommended method for calculating irrecoverable pressure loss in piping systems is conservative yet significantly lower than predicted by early design correlations that were based on the extrapolation of low Reynolds number test data

19. High-mode-number ballooning modes in a heliotron/torsatron system: 2, Stability

Energy Technology Data Exchange (ETDEWEB)

Nakajima, N.

1996-05-01

In heliotron/torsantron systems that have a large Shafranov shift, the local magnetic shear is found to have no stabilizing effect on high-mode-number ballooning modes at the outer side of the torus, even in the region where the global shear is stellarator-like in nature. The disappearance of this stabilization, in combination with the compression of the flux surfaces at the outer side of the torus, leads at relatively low values of the plasma pressure to significant modifications of the stabilizing effect due to magnetic field-line bending on high-mode-number ballooning modes-specifically, that the field-line bending stabilization can be remarkably suppressed or enhanced. In an equilibrium that is slightly Mercier-unstable or completely Mercier-stable due to peaked pressure profiles, such as those used in standaxd stability calculations or observed in experiments on the Compact Helical System, high-mode-number ballooning modes are destabilized due to these modified stability effects, with their eigenfunctions highly localized along the field line. Highly localized mode structures such as these cause the ballooning mode eigenvalues {omega} {sup 2} to have a strong field line dependence through the strong dependence of the local magnetic curvature, such that the level surfaces of {omega} {sup 2} ({psi}, {theta} {sub k}, {alpha}), (<0) become spheroids in ({theta} {sub k}, {alpha}) space, where {psi} labels flux surfaces and {theta} {sub k} is the radial wavenumber. Because the spheroidal level surfaces for unstable eigenvalues are surrounded by level surfaces for stable eigenvalues of high-mode-number toroidal Alfven eigenmodes, those high-mode-number ballooning modes never lead to low-mode-number modes. In configuration space, these high- mode-number modes are localized in a single toroidal pitch of the helical coils, and hence they may experience substantial stabilization due to finite Larmor radius effects.

20. Simulation of the loss of residual heat removal system of an integral test facility using French computer code CATHARE

International Nuclear Information System (INIS)

Troshko, A.A.; Hassan, Y.A.

1997-01-01

Thermal hydraulic CATHARE V1.3U code has been used to simulate an International Standard Problem (ISP38) experiment conducted at BETHSY Integral Test Facility located in Grenoble, France. This experiment dealt with simulation of the loss of Residual Heat Removal System (RHRS) during midloop operation. Overall, the code's prediction and experimental data were found to be in a reasonable qualitative agreement. However, the code underestimated the time of the core uncover and the actuation of the gravity feed injection. It was found that the code's model of the upward tee junction needs to be refined for the low pressure ranges

1. Simulation of fuzzy dynamical systems using the LU-representation of fuzzy numbers

International Nuclear Information System (INIS)

Stefanini, Luciano; Sorini, Laerte; Guerra, Maria Letizia

2006-01-01

We suggest the use of the parametric LU-representation of the fuzzy numbers, introduced in Gear and Sintofene [Gear Ml, Sintofene L. Approximate fuzzy arithmetic operations using monotonic interpolations. Fuzzy Sets Syst 2005;150:5-33] and improved in Sintofene et al. [Stefanini L, Sorini L, Guerra ML. Parametric representations of fuzzy numbers and applications. Working Paper Series EMS, 95, University of Urbino, 2004], in the simulation of fuzzy dynamical systems or fuzzy iterated maps. We show the computational advantages of the LU-representation in extending some well known standard maps to the fuzzy context, allowing the simulation by the Zadeh's extension principle in the general case of fuzzy parameters

2. A GC-system for the analysis of residual geothermal gases

Science.gov (United States)

Sheppard, D.S.; Truesdell, A.H.

1985-01-01

The gases evolved from geothermal fields, after condensation of H2O, CO2, H2S and NH3 in caustic solution, contain He, H2, Ar, O2, N2, CH4 and higher hydrocarbons. The analysis for the major components in these residual gas mixtures can be achieved by use of two simple gas chromatographs in parallel, and using 5A?? molecular sieve. The separation of He and H2 to baseline is achieved by using low temperatures (30??C) coupled with a relatively long column; and the difficult separation of Ar and O2 is achieved by use of a cryogenically cooled column. The use of switching valves to backflush and bypass columns ensures that a minimum time for analysis can be achieved whilst retaining baseline separations of the He/H2 and Ar/O2 pairs. ?? 1985 Friedr. Vieweg & Sohn Verlagsgesellschaft mbH.

3. Channel Model Optimization with Reflection Residual Component for Indoor MIMO-VLC System

Science.gov (United States)

Chen, Yong; Li, Tengfei; Liu, Huanlin; Li, Yichao

2017-12-01

A fast channel modeling method is studied to solve the problem of reflection channel gain for multiple input multiple output-visible light communications (MIMO-VLC) in the paper. For reducing the computational complexity when associating with the reflection times, no more than 3 reflections are taken into consideration in VLC. We think that higher order reflection link consists of corresponding many times line of sight link and firstly present reflection residual component to characterize higher reflection (more than 2 reflections). We perform computer simulation results for point-to-point channel impulse response, receiving optical power and receiving signal to noise ratio. Based on theoretical analysis and simulation results, the proposed method can effectively reduce the computational complexity of higher order reflection in channel modeling.

4. Content Of 2,4-D-14C Herbicide Residue In Water And Soil Of Irrigated Rice Field System

International Nuclear Information System (INIS)

Chairul, Sofnie M.; Djabir, Elida; Magdalena, Nelly

2000-01-01

The investigation of 2,4-D exp.-14C herbicide residue in water and soil of irrigated rice field system was carried out. Rice plant and weeds (Monochoria vaginalis Burn. F. Presl) were planted in 101 buckets using two kinds of soil condition, I.e. normal soil and 30 % above normal compact soil. After one week planting, the plants were sprayed with 1 u Ci of 2,4-D exp.-14C and 0,4 mg non labeled 2,4-D. The herbicide residue content was determined 0, 2, 4, 8 and 10 weeks after spraying with 2,4-D herbicide. The analysis was done using Combustion Biological Oxidizer merk Harvey ox-400, and counted with Liquid Scintillation Counter merk Beckman model LS-1801. The results indicates that the herbicide contents in water and soil decrease from the first spraying with herbicide until harvest herbicide Residue content in water after harvest was 0.87 x 10 exp.-6 ppm for soil normal condition, and 0.59 x 10 exp.-6 pm for the soil 30 % up normal condition, while herbicide content in soil was 1.54 x 10 exp.-6 ppm for soil normal condition and 1.48 x 10 exp.-6 ppm for soil 30 % up normal. 2,4-D herbicide residue content in rice after harvest was 0.27 x 10 exp.-6 ppm for normal soil condition and 0.25 x 10 exp.-6 ppm for the soil 30 % up normal. 2,4-D herbicide residue content in roots and leaves of weeds after harvest were respectively 0.29 x 10 exp.-6 ppm and 0.18 x 10 exp.-6 for normal soil condition, while for 30 % up normal soil were 0.25 x 10 exp.-5 ppm and 0.63 x 10 exp.-7 ppm. This result indicates that there is no effect pollution to surrounding area, because the herbicide content is still bellow the allowed detection limit, 0.05 ppm

5. The approximate number system and its relation to early math achievement: evidence from the preschool years.

Science.gov (United States)

Bonny, Justin W; Lourenco, Stella F

2013-03-01

Humans rely on two main systems of quantification; one is nonsymbolic and involves approximate number representations (known as the approximate number system or ANS), and the other is symbolic and allows for exact calculations of number. Despite the pervasiveness of the ANS across development, recent studies with adolescents and school-aged children point to individual differences in the precision of these representations that, importantly, have been shown to relate to symbolic math competence even after controlling for general aspects of intelligence. Such findings suggest that the ANS, which humans share with nonhuman animals, interfaces specifically with a uniquely human system of formal mathematics. Other findings, however, point to a less straightforward picture, leaving open questions about the nature and ontogenetic origins of the relation between these two systems. Testing children across the preschool period, we found that ANS precision correlated with early math achievement but, critically, that this relation was nonlinear. More specifically, the correlation between ANS precision and math competence was stronger for children with lower math scores than for children with higher math scores. Taken together, our findings suggest that early-developing connections between the ANS and mathematics may be fundamentally discontinuous. Possible mechanisms underlying such nonlinearity are discussed. Copyright © 2012 Elsevier Inc. All rights reserved.

6. Development of Portable Automatic Number Plate Recognition System on Android Mobile Phone

Science.gov (United States)

Mutholib, Abdul; Gunawan, Teddy S.; Chebil, Jalel; Kartiwi, Mira

2013-12-01

The Automatic Number Plate Recognition (ANPR) System has performed as the main role in various access control and security, such as: tracking of stolen vehicles, traffic violations (speed trap) and parking management system. In this paper, the portable ANPR implemented on android mobile phone is presented. The main challenges in mobile application are including higher coding efficiency, reduced computational complexity, and improved flexibility. Significance efforts are being explored to find suitable and adaptive algorithm for implementation of ANPR on mobile phone. ANPR system for mobile phone need to be optimize due to its limited CPU and memory resources, its ability for geo-tagging image captured using GPS coordinates and its ability to access online database to store the vehicle's information. In this paper, the design of portable ANPR on android mobile phone will be described as follows. First, the graphical user interface (GUI) for capturing image using built-in camera was developed to acquire vehicle plate number in Malaysia. Second, the preprocessing of raw image was done using contrast enhancement. Next, character segmentation using fixed pitch and an optical character recognition (OCR) using neural network were utilized to extract texts and numbers. Both character segmentation and OCR were using Tesseract library from Google Inc. The proposed portable ANPR algorithm was implemented and simulated using Android SDK on a computer. Based on the experimental results, the proposed system can effectively recognize the license plate number at 90.86%. The required processing time to recognize a license plate is only 2 seconds on average. The result is consider good in comparison with the results obtained from previous system that was processed in a desktop PC with the range of result from 91.59% to 98% recognition rate and 0.284 second to 1.5 seconds recognition time.

7. Tillage and residue management effect on soil properties, crop performance and energy relations in greengram (Vigna radiata L. under maize-based cropping systems

Directory of Open Access Journals (Sweden)

J.R. Meena

2015-12-01

Full Text Available Effect of tillage and crop residue management on soil properties, crop performance, energy relations and economics in greengram (Vigna radiata L. was evaluated under four maize-based cropping systems in an Inceptisol of Delhi, India. Soil bulk density, hydraulic conductivity and aggregation at 0–15 cm layer were significantly affected both by tillage and cropping systems, while zero tillage significantly increased the soil organic carbon content. Yields of greengram were significantly higher in maize–chickpea and maize–mustard systems, more so with residue addition. When no residue was added, conventional tillage required 20% higher energy inputs than the zero tillage, while the residue addition increased the energy output in both tillage practices. Maize–wheat–greengram cropping system involved the maximum energy requirement and the cost of production. However, the largest net return was obtained from the maize–chickpea–greengram system under the conventional tillage with residue incorporation. Although zero tillage resulted in better aggregation, C content and N availability in soil, and reduced the energy inputs, cultivation of summer greengram appeared to be profitable under conventional tillage system with residue incorporation.

8. A stochastic logical system approach to model and optimal control of cyclic variation of residual gas fraction in combustion engines

International Nuclear Information System (INIS)

Wu, Yuhu; Kumar, Madan; Shen, Tielong

2016-01-01

Highlights: • An in-cylinder pressure based measuring method for the RGF is derived. • A stochastic logical dynamical model is proposed to represent the transient behavior of the RGF. • The receding horizon controller is designed to reduce the variance of the RGF. • The effectiveness of the proposed model and control approach is validated by the experimental evidence. - Abstract: In four stroke internal combustion engines, residual gas from the previous cycle is an important factor influencing the combustion quality of the current cycle, and the residual gas fraction (RGF) is a popular index to monitor the influence of residual gas. This paper investigates the cycle-to-cycle transient behavior of the RGF in the view of systems theory and proposes a multi-valued logic-based control strategy for attenuation of RGF fluctuation. First, an in-cylinder pressure sensor-based method for measuring the RGF is provided by following the physics of the in-cylinder transient state of four-stroke internal combustion engines. Then, the stochastic property of the RGF is examined based on statistical data obtained by conducting experiments on a full-scale gasoline engine test bench. Based on the observation of the examination, a stochastic logical transient model is proposed to represent the cycle-to-cycle transient behavior of the RGF, and with the model an optimal feedback control law, which targets on rejection of the RGF fluctuation, is derived in the framework of stochastic logical system theory. Finally, experimental results are demonstrated to show the effectiveness of the proposed model and the control strategy.

9. Innovative bioelectrochemical-anaerobic-digestion integrated system for ammonia recovery and bioenergy production from ammonia-rich residues

DEFF Research Database (Denmark)

Zhang, Yifeng; Angelidaki, Irini

2015-01-01

Ammonia (NH4+/NH3) inhibition during anaerobic digestion process is one of the most frequent problems existing in biogas plants, resulting in unstable process and reduced biogas production. In this study, we developed a novel hybrid system, consisted of a submersed microbial resource recovery cell...... (SMRC) and a continuous stirred tank reactor (CSTR), to prevent ammonia toxicity during anaerobic digestion by in-situ ammonia recovery and electricity production (Figure 1). In batch experiment, the ammonia concentration in the CSTR decreased from 6 to 0.7 g-N/L with an average recovery rate of 0.18 g...... of ammonia recovery on the microbial community composition in the integrated system. Results clearly indicate the great potential of the SMRC-CSTR-coupled system for efficient and cost-effective ammonia recovery, energy production and treatment of ammonia-rich residues....

10. Adaptive vector quantization in SVD MIMO system backward link with limited number of active sub channels

Directory of Open Access Journals (Sweden)

Ivaniš Predrag

2004-01-01

Full Text Available This paper presents combination of Channel Optimized Vector Quantization based on LBG algorithm and sub channel power allocation for MIMO systems with Singular Value Decomposition and limited number of active sub channels. Proposed algorithm is designed to enable maximal throughput with bit error rate bellow some tar- get level in case of backward channel capacity limitation. Presence of errors effect in backward channel is also considered.

11. A method for solving fully fuzzy linear system with trapezoidal fuzzy numbers

Directory of Open Access Journals (Sweden)

A. Kumar

2010-03-01

Full Text Available Different methods have been proposed for finding the non-negative solution of fully fuzzy linear system (FFLS i.e. fuzzy linear system with fuzzy coefficients involving fuzzy variables. To the best of our knowledge, there is no method in the literature for finding the non-negative solution of a FFLS without any restriction on the coefficient matrix. In this paper a new computational method is proposed to solve FFLS without any restriction on the coefficient matrix by representing all the parameters as trapezoidal fuzzy numbers.

12. ARCHITECTURE OF PLANETARY SYSTEMS BASED ON KEPLER DATA: NUMBER OF PLANETS AND COPLANARITY

International Nuclear Information System (INIS)

Fang, Julia; Margot, Jean-Luc

2012-01-01

We investigated the underlying architecture of planetary systems by deriving the distribution of planet multiplicity (number of planets) and the distribution of orbital inclinations based on the sample of planet candidates discovered by the Kepler mission. The scope of our study included solar-like stars and planets with orbital periods less than 200 days and with radii between 1.5 and 30 Earth radii, and was based on Kepler planet candidates detected during Quarters 1-6. We created models of planetary systems with different distributions of planet multiplicity and inclinations, simulated observations of these systems by Kepler, and compared the properties of the transits of detectable objects to actual Kepler planet detections. Specifically, we compared with both the Kepler sample's transit numbers and normalized transit duration ratios in order to determine each model's goodness of fit. We did not include any constraints from radial velocity surveys. Based on our best-fit models, 75%-80% of planetary systems have one or two planets with orbital periods less than 200 days. In addition, over 85% of planets have orbital inclinations less than 3° (relative to a common reference plane). This high degree of coplanarity is comparable to that seen in our solar system. These results have implications for planet formation and evolution theories. Low inclinations are consistent with planets forming in a protoplanetary disk, followed by evolution without significant and lasting perturbations from other bodies capable of increasing inclinations.

13. Catalyst systems in the production of biodiesel from residual oil; Sistemas cataliticos na producao de biodiesel por meio de oleo residual

Energy Technology Data Exchange (ETDEWEB)

Souza, Carlos Alexandre de [Universidade Federal de Itajuba (UNIFEI), MG (Brazil)

2006-07-01

The vegetable oils and fat animals appear like an alternative for substitution the diesel oil in ignition engines for compression. Submitting the oil on transesterification reaction, we obtain a fuel with same characteristics as diesel, called biodiesel. Generally, 85 per cent of biodiesel cost is from the oil production. Through transesterification vegetable oil can be transformed in a mixture of esters of fatty acids. The residual oil from frying has been used as a possibility of raw materials of biodiesel, due to its easy acquisition and the viability of not being discarded as waste. (author)

14. Impact testing of the residual limb: System response to changes in prosthetic stiffness.

Science.gov (United States)

Boutwell, Erin; Stine, Rebecca; Gard, Steven

2016-01-01

Currently, it is unknown whether changing prosthetic limb stiffness affects the total limb stiffness and influences the shock absorption of an individual with transtibial amputation. The hypotheses tested within this study are that a decrease in longitudinal prosthetic stiffness will produce (1) a reduced total limb stiffness, and (2) reduced magnitude of peak impact forces and increased time delay to peak force. Fourteen subjects with a transtibial amputation participated in this study. Prosthetic stiffness was modified by means of a shock-absorbing pylon that provides reduced longitudinal stiffness through compression of a helical spring within the pylon. A sudden loading evaluation device was built to examine changes in limb loading mechanics during a sudden impact event. No significant change was found in the peak force magnitude or timing of the peak force between prosthetic limb stiffness conditions. Total limb stiffness estimates ranged from 14.9 to 17.9 kN/m but were not significantly different between conditions. Thus, the prosthetic-side total limb stiffness was unaffected by changes in prosthetic limb stiffness. The insensitivity of the total limb stiffness to prosthetic stiffness may be explained by the mechanical characteristics (i.e., stiffness and damping) of the anatomical tissue within the residual limb.

15. Analysis of 10 systemic pesticide residues in various baby foods using liquid chromatography-tandem mass spectrometry.

Science.gov (United States)

Yang, Angel; Abd El-Aty, A M; Park, Jong-Hyouk; Goudah, Ayman; Rahman, Md Musfiqur; Do, Jung-Ah; Choi, Ok-Ja; Shim, Jae-Han

2014-06-01

Ten systemic pesticides, comprising methomyl, thiamethoxam, acetamiprid, carbofuran, fosthiazate, metalaxyl, azoxystrobin, diethofencarb, propiconazole, and difenoconazole, were detected in 13 baby foods (cereals, boiled potatoes, fruit and milk) using QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) for sample preparation and liquid chromatography tandem mass spectrometry for analysis. The matrix-matched calibration curves showed good linearity with determination coefficients (R(2) ) >0.992. The limits of detection and quantitation were 0.0015-0.003 and 0.005-0.01 mg/kg, respectively. The mean recoveries of three different concentrations ranged from 69.2 to 127.1% with relative standard deviations market, and none of the samples were found to contain pesticide residues. This method is suitable for the identification and quantification of systemic pesticides with matrix-matched standards in various baby foods. Copyright © 2013 John Wiley & Sons, Ltd.

16. Interface stress in socket/residual limb with transtibial prosthetic suspension systems during locomotion on slopes and stairs.

Science.gov (United States)

Eshraghi, Arezoo; Abu Osman, Noor Azuan; Gholizadeh, Hossien; Ali, Sadeeq; Abas, Wan Abu Bakar Wan

2015-01-01

This study aimed to compare the effects of different suspension methods on the interface stress inside the prosthetic sockets of transtibial amputees when negotiating ramps and stairs. Three transtibial prostheses, with a pin/lock system, a Seal-In system, and a magnetic suspension system, were created for the participants in a prospective study. Interface stress was measured as the peak pressure by using the F-socket transducers during stairs and ramp negotiation. Twelve individuals with transtibial amputation managed to complete the experiments. During the stair ascent and descent, the greatest peak pressure was observed in the prosthesis with the Seal-In system. The magnetic prosthetic suspension system caused significantly different peak pressure at the anterior proximal region compared with the pin/lock (P = 0.022) and Seal-In (P = 0.001) during the stair ascent. It was also observed during the stair descent and ramp negotiation. The prostheses exhibited varying pressure profiles during the stair and ramp ascent. The prostheses with the pin/lock and magnetic suspension systems exhibited lower peak pressures compared with the Seal-In system. The intrasystem pressure distribution at the anterior and posterior regions of the residual limb was fairly homogenous during the stair and ramp ascent and descent. Nevertheless, the intrasystem pressure mapping revealed a significant difference among the suspension types, particularly at the anterior and posterior sensor sites.

17. An evidential approach to problem solving when a large number of knowledge systems is available

Science.gov (United States)

Dekorvin, Andre

1989-01-01

Some recent problems are no longer formulated in terms of imprecise facts, missing data or inadequate measuring devices. Instead, questions pertaining to knowledge and information itself arise and can be phrased independently of any particular area of knowledge. The problem considered in the present work is how to model a problem solver that is trying to find the answer to some query. The problem solver has access to a large number of knowledge systems that specialize in diverse features. In this context, feature means an indicator of what the possibilities for the answer are. The knowledge systems should not be accessed more than once, in order to have truly independent sources of information. Moreover, these systems are allowed to run in parallel. Since access might be expensive, it is necessary to construct a management policy for accessing these knowledge systems. To help in the access policy, some control knowledge systems are available. Control knowledge systems have knowledge about the performance parameters status of the knowledge systems. In order to carry out the double goal of estimating what units to access and to answer the given query, diverse pieces of evidence must be fused. The Dempster-Shafer Theory of Evidence is used to pool the knowledge bases.

18. FM-to-AM modulations induced by a weak residual reflection stack of sine-modulated pulses in inertial confinement fusion laser systems

Science.gov (United States)

Huang, Xiaoxia; Deng, Xuewei; Zhou, Wei; Hu, Dongxia; Guo, Huaiwen; Wang, Yuancheng; Zhao, Bowang; Zhong, Wei; Deng, Wu

2018-02-01

We report on frequency to amplitude modulation (FM-to-AM) conversion induced by a weak residual reflection stack of sine-modulated pulses in a complex laser system. Theoretical and experimental investigations reveal that when weak residual reflected pulses stack on the main pulse, the spectral intensity changes in the stacked region, which then converts to obvious AM. This kind of FM-to-AM effect often occurs in the tail of the pulse and cannot be eliminated by common compensation methods, which even enhance the modulation depth. Furthermore, the actual intensity modulation frequency and depth induced by the residual reflection stack are much higher and deeper than observed on the oscilloscope, which is harmful for safe operation of the laser facility and the driving power balance during inertial confinement fusion. To eliminate this kind of FM-to-AM effect, any possible on-axis and near-axis residual reflection in laser systems must be avoided.

19. [Awareness survey of Healthcare Number System pros and cons according to medical doctors in Japan].

Science.gov (United States)

Takahashi, Yoshimitsu; Uryuhara, Yoko; Inoue, Machiko; Okamoto, Shigeru; Kashihara, Hidenori; Kito, Kumiko; Shinohara, Keiko; Mandai, Marie; Morioka, Miho; Tanaka, Shiro; Kawakami, Koji; Nakayama, Takeo

2015-01-01

After bills to launch the Social Security and Tax Number System were enacted in 2013, health and political officials have considered the Healthcare Number System (the System). However, little is known about doctors' awareness and concerns about the System. This study aimed to measure how many doctors disagree with the System, examine the doctors' characteristics, and analyze the benefits and harms of the System that they identified. A cross-sectional survey was conducted of doctors via the Internet. The participants were selected from a convenience sample of a panel of doctors based on stratified sampling including four groups: working at a hospital and harms were analyzed using qualitative content analysis. There were 562 respondents (68%). By group, 16/143 (11%), 25/138 (18%), 31/132 (23%), and 43/149 (29%) doctors, respectively, thought that the System was unnecessary. The variables that correlated with the main outcome were age (per 5 years; odds ratio [95% confidence interval], 1.14 [1.01-1.29]) and type of medical facility (working at a clinic; 1.99 [1.30-3.08]). The doctors identified that unifying information could decrease administrative duties, facilitate inter-facility collaboration, and prevent inappropriate medical consultations. This could result in decreased healthcare costs and personalized healthcare. However, the doctors also identified that integrating information and dealing with big data could increase information leakage and information management, cause over-monitoring of doctors, and enable the inappropriate use of integrated information. This could result in deteriorating healthcare. Since some information should not be integrated, the System raises ethical considerations about privacy. Among the doctors surveyed here, 10-30% thought the System was unnecessary. These respondents tended to be older and work at a clinic. The System could decrease the cost of healthcare and enable personalized healthcare but could also increase information

20. Evaluation of dose due to the liberation of the radioactive content present in systems of final disposal of radioactive residues

International Nuclear Information System (INIS)

2006-01-01

1. Application of remote sensing and geographical information system for generation of runoff curve number

Science.gov (United States)

Meshram, S. Gajbhiye; Sharma, S. K.; Tignath, S.

2017-07-01

Watershed is an ideal unit for planning and management of land and water resources (Gajbhiye et al., IEEE international conference on advances in technology and engineering (ICATE), Bombay, vol 1, issue 9, pp 23-25, 2013a; Gajbhiye et al., Appl Water Sci 4(1):51-61, 2014a; Gajbhiye et al., J Geol Soc India (SCI-IF 0.596) 84(2):192-196, 2014b). This study aims to generate the curve number, using remote sensing and geographical information system (GIS) and the effect of slope on curve number values. The study was carried out in Kanhaiya Nala watershed located in Satna district of Madhya Pradesh. Soil map, Land Use/Land cover and slope map were generated in GIS Environment. The CN parameter values corresponding to various soil, land cover, and land management conditions were selected from Natural Resource Conservation Service (NRCS) standard table. Curve number (CN) is an index developed by the NRCS, to represent the potential for storm water runoff within a drainage area. The CN for a drainage basin is estimated using a combination of land use, soil, and antecedent soil moisture condition (AMC). In present study effect of slope on CN values were determined. The result showed that the CN unadjusted value are higher in comparison to CN adjusted with slope. Remote sensing and GIS is very reliable technique for the preparation of most of the input data required by the SCS curve number model.

2. Extending birthday paradox theory to estimate the number of tags in RFID systems.

Directory of Open Access Journals (Sweden)

Masoud Shakiba

Full Text Available The main objective of Radio Frequency Identification systems is to provide fast identification for tagged objects. However, there is always a chance of collision, when tags transmit their data to the reader simultaneously. Collision is a time-consuming event that reduces the performance of RFID systems. Consequently, several anti-collision algorithms have been proposed in the literature. Dynamic Framed Slotted ALOHA (DFSA is one of the most popular of these algorithms. DFSA dynamically modifies the frame size based on the number of tags. Since the real number of tags is unknown, it needs to be estimated. Therefore, an accurate tag estimation method has an important role in increasing the efficiency and overall performance of the tag identification process. In this paper, we propose a novel estimation technique for DFSA anti-collision algorithms that applies birthday paradox theory to estimate the number of tags accurately. The analytical discussion and simulation results prove that the proposed method increases the accuracy of tag estimation and, consequently, outperforms previous schemes.

3. Extending birthday paradox theory to estimate the number of tags in RFID systems.

Science.gov (United States)

Shakiba, Masoud; Singh, Mandeep Jit; Sundararajan, Elankovan; Zavvari, Azam; Islam, Mohammad Tariqul

2014-01-01

The main objective of Radio Frequency Identification systems is to provide fast identification for tagged objects. However, there is always a chance of collision, when tags transmit their data to the reader simultaneously. Collision is a time-consuming event that reduces the performance of RFID systems. Consequently, several anti-collision algorithms have been proposed in the literature. Dynamic Framed Slotted ALOHA (DFSA) is one of the most popular of these algorithms. DFSA dynamically modifies the frame size based on the number of tags. Since the real number of tags is unknown, it needs to be estimated. Therefore, an accurate tag estimation method has an important role in increasing the efficiency and overall performance of the tag identification process. In this paper, we propose a novel estimation technique for DFSA anti-collision algorithms that applies birthday paradox theory to estimate the number of tags accurately. The analytical discussion and simulation results prove that the proposed method increases the accuracy of tag estimation and, consequently, outperforms previous schemes.

4. Malleability of the approximate number system: effects of feedback and training

Directory of Open Access Journals (Sweden)

Nicholas Kurshan DeWind

2012-04-01

Full Text Available Prior research demonstrates that animals and humans share an approximate number system (ANS, characterized by ratio dependence and that the precision of this system increases substantially over human development. The goal of the present research was to investigate the malleability of the ANS (as measured by weber fraction in adult subjects in response to feedback and to explore the relationship between ANS acuity and acuity on another magnitude comparison task. We tested each of 20 subjects over six 1-hour sessions. The main findings were that a weber fractions rapidly decreased when trial-by-trial feedback was introduced in the second session and remained stable over continued training, b weber fractions remained steady when trial-by-trial feedback was removed in session six, c weber fractions from the number comparison task were positively correlated with weber fractions from a line length comparison task, d improvement in weber fractions in response to feedback for the number task did not transfer to the line length task, e finally, the precision of the ANS was positively correlated with math, but not verbal, SAT or GRE scores. Potential neural correlates of the perceptual information and decision processes are considered, and predictions regarding the neural correlates of ANS malleability are discussed.

5. GAMSOURCE - WRS system module number 38474 for calculating gamma-ray sources produced by neutron capture

International Nuclear Information System (INIS)

Grimstone, M.J.

1978-06-01

The WRS Modular Programming System has been developed as a means by which programmes may be more efficiently constructed, maintained and modified. In this system a module is a self-contained unit typically composed of one or more Fortran routines, and a programme is constructed from a number of such modules. This report describes one WRS module, the function of which is to calculate the source strength of gamma-rays arising from neutron capture in a system represented in one-dimensional geometry. The information given in this manual is of use both to the programmer wishing to incorporate the module in a programme, and to the user of such a programme. (author)

6. REMTWO - WRS system module number 299 for calculating the removal flux in a slab shield

International Nuclear Information System (INIS)

Grimstone, M.J.

1978-06-01

The WRS Modular Programming System has been developed as a means by which programmes may be more efficiently constructed, maintained and modified. In this system a module is a self-contained unit typically composed of one or more Fortran routines, and a programme is constructed from a number of such modules. This report describes one WRS module, the function of which is to calculate the uncollided flux due to a distributed source in a one-dimensional plane geometry system. A method is used in which the flux is approximated by the sum of diffusion equation solutions. The information given in this manual is of use both to the programmer wishing to incorporate the module in a programme, and to the user of such a programme. (author)

7. Copy number ratios determined by two digital polymerase chain reaction systems in genetically modified grains

Science.gov (United States)

Pérez Urquiza, M.; Acatzi Silva, A. I.

2014-02-01

Three certified reference materials produced from powdered seeds to measure the copy number ratio sequences of p35S/hmgA in maize containing MON 810 event, p35S/Le1 in soybeans containing GTS 40-3-2 event and DREB1A/acc1 in wheat were produced according to the ISO Guides 34 and 35. In this paper, we report digital polymerase chain reaction (dPCR) protocols, performance parameters and results of copy number ratio content of genetically modified organisms (GMOs) in these materials using two new dPCR systems to detect and quantify molecular deoxyribonucleic acid: the BioMark® (Fluidigm) and the OpenArray® (Life Technologies) systems. These technologies were implemented at the National Institute of Metrology in Mexico (CENAM) and in the Reference Center for GMO Detection from the Ministry of Agriculture (CNRDOGM), respectively. The main advantage of this technique against the more-used quantitative polymerase chain reaction (qPCR) is that it generates an absolute number of target molecules in the sample, without reference to standards or an endogenous control, which is very useful when not much information is available for new developments or there are no standard reference materials in the market as in the wheat case presented, or when it was not possible to test the purity of seeds as in the maize case presented here. Both systems reported enhanced productivity, increased reliability and reduced instrument footprint. In this paper, the performance parameters and uncertainty of measurement obtained with both systems are presented and compared.

8. Criminal Justice System of Children in The Law Number 11 of 2012 (Restorative Justice

Directory of Open Access Journals (Sweden)

Ansori Ansori

2014-01-01

Full Text Available The future of the children will determine the future of the nation. The increasing problem of juvenile delinquency in this globalization and information technology era, requires the state to give more attention to the child's future. Application of the criminal justice system for children in Indonesia is as stipulated in Law Number 3 of 1997 potentially detrimental to the child's interests. In practice, the judicial system had many problems, among them is a violation of the rights of children, such as: physical and psychological violence, as well as deprivation of the right to education and welfare. It happened because the juvenile justice system is against to national and international regulations on the protection of children’s rights. Besides that, theory of punishment for the juvenile delinquency still refers to the concept of retribution for the crimes. This concept is not very useful for the development of the child, so the concept need to be repaired with the concept of restorative justice. With this concept, the criminal justice system for the juvenile delinquency, leads to the restoration of the state and the settlement pattern, involving the perpetrator, the victim, their families and engage with the community. This is done with consideration for the protection of children against the law. Whereas in line with this spirit of the restorative justice, it gives birth to the Law No. 11 of 2012 on The Criminal Justice System of Children. How To Cite: Ansori, A. (2014. Criminal Justice System of Children in The Law Number 11 of 2012 (Restorative Justice. Rechtsidee, 1(1, 11-26. doi:http://dx.doi.org/10.21070/jihr.v1i1.95

9. Numbers of simultaneous turnovers calculated from anesthesia or operating room information management system data.

Science.gov (United States)

Dexter, Franklin; Marcon, Eric; Aker, John; Epstein, Richard H

2009-09-01

More personnel are needed to turn over operating rooms (ORs) promptly when there are more simultaneous turnovers. Anesthesia and/or OR information management system data can be analyzed statistically to quantify simultaneous turnovers to evaluate whether to add an additional turnover team. Data collected for each case at a six OR facility were room, date of surgery, time of patient entry into the OR, and time of patient exit from the OR. The number of simultaneous turnovers was calculated for each 1 min of 122 4-wk periods. Our end point was the reduction in the daily minutes of simultaneous turnovers exceeding the number of teams caused by the addition of a team. Increasing from two turnover teams to three teams reduced the mean daily minutes of simultaneous turnovers exceeding the numbers of teams by 19 min. The ratio of 19 min to 8 h valued the time of extra personnel as 4.0% of the time of OR staff, surgeons, and anesthesia providers. Validity was suggested by other methods of analyses also suggesting staffing for three simultaneous turnovers. Discrete-event simulation showed that the reduction in daily minutes of turnover times from the addition of a team would likely match or exceed the reduction in the daily minutes of simultaneous turnovers exceeding the numbers of teams. Confidence intervals for daily minutes of turnover times achieved by increasing from two to three teams were calculated using successive 4-wk periods. The distribution was sufficiently close to normal that accurate confidence intervals could be calculated using Student's t distribution (Lilliefors' test P = 0.58). Analysis generally should use 13 4-wk periods as increasing the number of periods from 6 to 13 significantly reduced the coefficient of variation of the averages but not increasing the number of periods from 6 to 9 or from 9 to 13. The number of simultaneous turnovers can be calculated for each 1 min over 1 yr. The reduction in the daily minutes of simultaneous turnovers

10. [A clinical study of the number processing system: decimal size effects on reading numbers in patients with left parieto-occipital gliomas].

Science.gov (United States)

Gasparini, F M; Cohen, L; Lopes, M; Denvil, D; Capelle, L; Duffau, H; Van Effenterre, R

2005-04-01

An increasing number of studies are focusing on the anatomo-functional organisation of number processing and some cognitive models have been recently developed. Nevertheless, relationships between areas implicated in number processing, and language areas and circuits remain unclear. Recently, Dehaene and Cohen, in their "triple-code model of number processing", (Dehaene and Cohen, 1995) distinguished two alternative number representation and processing systems: one depending on verbal processes, the other representing a quantity manipulation. According to this model, the retrieval of "arithmetical facts" (AF), learned by rote at school and memorised in a verbal form (such as the multiplication table or simple addition problems) can be considered as a verbal automatism; conversely, subtraction problems, which require mental manipulation of the quantities, represent an abstract, semantic elaboration: "Actual Calculation" (AC). The anatomical correlate of the retrieval of AF (depending on automatic verbal associations) seems to correspond to the left-hemispheric perisylvian areas, while impairment of the actual calculation (AC) depends on the intraparietal region, particularly in the left dominant hemisphere. The present study describes the neuropsychological assessment of three patients, tested after surgery for left parieto-occipital tumors. Two of them were affected by an anaplasic glioma, the third by a low-grade glioma. The cognitive evaluation included: words of Rey, numeral (directed and reversed) span, reading of "simple" numbers (from 1 to 10) and of "complex" numbers (many decimals), writing (dictation) and reading a standard text, finger denomination and right-left distinction. All patients showed language disturbances, dysgraphia and severe dyslexia. In reading numbers, we identified two types of errors: lexical and syntactic. "Lexical errors" consisted in a wrong choice among words in the number's lexicon. For instance, all patients made errors in reading

11. Changes in the organ procurement system in South Korea: effects on brain-dead donor numbers.

Science.gov (United States)

Lee, S D; Kim, J H

2009-11-01

In Korea, the Organ Transplantation Act came into effect in 2000, establishing the Korean Network for Organ Sharing (KONOS) with centralized authority for organ procurement as well as for approval of donors and recipients to ensure fair organ allocation. However, the number of brain-dead donors decreased sharply, and the organ allocation system proved inefficient. The government revised the Organ Transplantation Act in August 2002, introducing an incentive system. If a transplantation hospital formed a Committee for Brain Death Evaluation and a Hospital Organ Procurement Organization, it could receive a kidney from a brain dead-donor as an incentive to foster organ procurement regardless of the KONOS wait list. The government also launched a pilot brain-dead donor registry program to strengthen Hospital Organ Procurement Organization activity. If local hospitals collaborated with specialized hospitals in organ procurement, local hospitals obtained financial incentives. But because the organ shortage problem has not been resolved, the government has proposed four initiatives: first, broadening the incentive system, which makes it possible to give each specialized hospital a choice of one of eight organs from each donor as an incentive; second, development of an Independent Organ Procurement Organization; third introduction of an opt-out system; and last, improvement of the Committee for Brain Death Evaluation system. It is uncertain which initiatives will be adopted, but changes in organ procurement systems are nonetheless considered a key to solve the organ shortage problem in Korea.

12. ENTROPY PRODUCTION IN COLLISIONLESS SYSTEMS. II. ARBITRARY PHASE-SPACE OCCUPATION NUMBERS

International Nuclear Information System (INIS)

Barnes, Eric I.; Williams, Liliya L. R.

2012-01-01

We present an analysis of two thermodynamic techniques for determining equilibria of self-gravitating systems. One is the Lynden-Bell (LB) entropy maximization analysis that introduced violent relaxation. Since we do not use the Stirling approximation, which is invalid at small occupation numbers, our systems have finite mass, unlike LB's isothermal spheres. (Instead of Stirling, we utilize a very accurate smooth approximation for ln x!.) The second analysis extends entropy production extremization to self-gravitating systems, also without the use of the Stirling approximation. In addition to the LB statistical family characterized by the exclusion principle in phase space, and designed to treat collisionless systems, we also apply the two approaches to the Maxwell-Boltzmann (MB) families, which have no exclusion principle and hence represent collisional systems. We implicitly assume that all of the phase space is equally accessible. We derive entropy production expressions for both families and give the extremum conditions for entropy production. Surprisingly, our analysis indicates that extremizing entropy production rate results in systems that have maximum entropy, in both LB and MB statistics. In other words, both thermodynamic approaches lead to the same equilibrium structures.

13. Residue processing

Energy Technology Data Exchange (ETDEWEB)

Gieg, W.; Rank, V.

1942-10-15

In the first stage of coal hydrogenation, the liquid phase, light and heavy oils were produced; the latter containing the nonliquefied parts of the coal, the coal ash, and the catalyst substances. It was the problem of residue processing to extract from these so-called let-down oils that which could be used as pasting oils for the coal. The object was to obtain a maximum oil extraction and a complete removal of the solids, because of the latter were returned to the process they would needlessly burden the reaction space. Separation of solids in residue processing could be accomplished by filtration, centrifugation, extraction, distillation, or low-temperature carbonization (L.T.C.). Filtration or centrifugation was most suitable since a maximum oil yield could be expected from it, since only a small portion of the let-down oil contained in the filtration or centrifugation residue had to be thermally treated. The most satisfactory centrifuge at this time was the Laval, which delivered liquid centrifuge residue and centrifuge oil continuously. By comparison, the semi-continuous centrifuges delivered plastic residues which were difficult to handle. Various apparatus such as the spiral screw kiln and the ball kiln were used for low-temperature carbonization of centrifuge residues. Both were based on the idea of carbonization in thin layers. Efforts were also being made to produce electrode carbon and briquette binder as by-products of the liquid coal phase.

14. High reliability flow system - an assessment of pump reliability and optimisation of the number of pumps

International Nuclear Information System (INIS)

Butterfield, J.M.

1981-01-01

A system is considered where a number of pumps operate in parallel. Normally, all pumps operate, driven by main motors fed from the grid. Each pump has a pony motor fed from an individual battery supply. Each pony motor is normally running, but not engaged to the pump shaft. On demand, e.g. failure of grid supplies, each pony motor is designed to clutch-in automatically when the pump speed falls to a specified value. The probability of all the pony motors failing to clutch-in on demand must be demonstrated with 95% confidence to be less than 10 -8 per demand. This assessment considers how the required reliability of pony motor drives might be demonstrated in practice and the implications on choice of the number of pumps at the design stage. The assessment recognises that not only must the system prove to be extremely reliable, but that demonstration that reliability is adequate must be done during plant commissioning, with practical limits on the amount of testing performed. It is concluded that a minimum of eight pony motors should be provided, eight pumps each with one pony motor (preferred) or five pumps each with two independent pony motors. A minimum of two diverse pony motor systems should be provided. (author)

15. Experimental and analytical studies on the passive residual heat removal system for the advanced integral type reactor

International Nuclear Information System (INIS)

Park, Hyun-Sik; Choi, Ki-Yong; Cho, Seok; Park, Choon-Kyung; Lee, Sung-Jae; Song, Chul-Hwa; Chung, Moon-Ki

2004-01-01

An experiment on the thermal-hydraulic characteristics of the passive residual heat removal system (PRHRS) for an advanced integral type reactor, SMART-P, has been performed, and its experimental results have been analyzed using a best-estimated system analysis code, MARS. The experiment is performed to investigate the performance of the passive residual heat removal system using the high temperature and high pressure thermal-hydraulic test facility (VISTA) which simulates the SMART-P. The natural circulation performance of the PRHRS, the heat transfer characteristics of the PRHRS heat exchangers and the emergency cooldown tank (ECT), and the thermal-hydraulic behavior of the primary loop are investigated. The experimental results show that the coolant flows steadily in the PRHRS loop and the heat transfer through the PRHRS heat exchanger in the emergency cooldown tank is sufficient enough to enable a natural circulation of the coolant. Analysis on a typical PRHRS test has been carried out using the MARS code. The overall trends of the calculated flow rate, pressure, temperature, and heat transfer rate in the PRHRS are similar to the experimental data. There is good agreement between the experimental data and the calculated one for the fluid temperature in the PRHRS steam line. However, the calculated fluid temperature in the PRHRS condensate line is higher, the calculated coolant outlet temperature is lower, and the heat transfer rate through the PRHRS heat exchanger is lower than the experimental data. It seems that it is due to an insufficient heat transfer modeling in the pool such as the emergency cooldown tank in the MARS calculation. (author)

16. Quality Assurance Objectives for Nondestructive Assay with the Residues Segmented Gamma Scan Assay System at the Plutonium Finishing Plant (PFP)

International Nuclear Information System (INIS)

WESTSIK, G.A.

2001-01-01

The PFP facility utilizes a Segmented Gamma Scanner Assay System (SGSAS) to perform assays on cans of ash for WIPP characterization measurements. This report documents the conformance of SGSAS to the precision and accuracy radioassay QAOs, and reports the minimum detectable concentration (MDC). The QAO measurement runs supplied in this document were for a billet can geometry. The billet cans containing stabilized residues will be loaded into pipe overpack containers (POC) for shipment to WIPP. The measurements were performed in March, 2001 following a system reconfiguration which occurred on October 27, 2000. The actual system recalibration was performed in March 2001. The new calibration will be used for all assay data collected after October 27, 2000. No parameter changes have been made and the system has been in measurement control during this period of time. The WIPP-WAC defines four nominal test levels for NDA, which are in alpha curies and grams of weapons grade (WG) Pu. Due to intended utilization of the SGSAS system for the materials mentioned above, it is presently only being qualified for the two highest QAO ranges. The sources used for the QAO measurement are the WPP NDA Performance Demonstration Project working reference materials. This report documents the analysis of test data for the SGSAS system at the nominal 10 gram and 160 gram levels. The MDC was determined using a billet can filled with diatomaceous earth but no plutonium present. Since the system is not being qualified for TRU vs low-level waste (LLW) sorting the MDC will primarily provide verification that the detection level for the system is well below the QAO ranges for which the system is being qualified. The MDC reflects the best sensitivity for a particular assay system and specific assay conditions (i.e. count time, sample configuration) when no added radioactivity is present. As such, no radioactive sources were required for the MDC determination. As with the accuracy and precision

17. Red worm behavior (Eisenia spp. in vermicomposting systems of organic residues

Directory of Open Access Journals (Sweden)

2012-08-01

Full Text Available This work evaluates the behavior of the vermicomposting red worm (Eisenia spp. in two environments (greenhouse and unsheltered and with two solid organic substrates (cow manure=CM and kitchen waste=KW in the zone of Carmen Pampa, Nor Yungas Province, Department of La Paz – Bolivia, using a factorial design with two factors and three repetitions (ANOVA analysis. The largest number of cocoons was found in the greenhouse treatment, with 64 in CM and 41 in KW. Cocoon viability was also greatest in the greenhouse treatment, at 100% for CM and 96% for KW. Similarly, the greatest number of worms hatched from cocoons was in the greenhouse treatment, with 2 immature worms for CM and 3.5 for KW, and the greatest number of immature worms was registered in the greenhouse treatment with 123 individuals in CM and 16 in KW. The lowest mortality rate due to environment was in the greenhouse treatment, with 3.90% mortality with CM and 88.64% with KW. The greatest number of mature worms (with clitella was in the unsheltered treatment, with 15 in CM and 21 in KW. The greatest biomass of immature worms was found in the greenhouse treatment, with 1.41 g of worms for CM and 0.185 g for KW; however, the greatest biomass of mature worms was in the KW treatment, with 7.98 g for the greenhouse treatment and 6.93 g for the unsheltered treatment. The phytotoxicity from CM vermicompost in the two environments was lowest, exhibiting a 66.6% rate of germination, and the opposite was true for KW, which was the most toxic in both environments. Macronutrient content in vermicompost obtained was: nitrogen at 2.45% and 2.31%, phosphorus at 500 mg kg-1 and 220 mg kg-1 and potassium at 27.43 and 2.76 cmol(+ kg-1 of dry substrate in KW and CM respectively.

18. An environmental assessment of electricity production from slaughterhouse residues. Linking urban, industrial and waste management systems

International Nuclear Information System (INIS)

Santagata, R.; Ripa, M.; Ulgiati, S.

2017-01-01

Highlights: • Animal by-products use for electricity generation is investigated as a case-study. • Different methodological approaches to deal with by-products are explored in LCA. • Adopting a holistic perspective is crucial to achieve a circular economy framework. - Abstract: The food processing industry continues to grow, generating large amount of organically rich waste flows per year: these processors face significant economic and environmental pressures for appropriate conversion and disposal of these waste flows. Solid waste disposal problems, mostly in highly urbanized environments, energy shortages (primarily oil) and/or high petroleum prices, as well as environmental issues such as the shrinking landfill capacity, can all be addressed by converting waste material into useful and saleable products. This paper brings to the attention a possible strategy in order to meet the general EU directives concerning the residues utilization and percentage contribution for the total energy consumption by 2020, by evaluating the use of animal by-products (category 3, as defined in the directive 2002/1774/EC) for energy purposes. Slaughterhouse waste represents an important potential source of renewable energy: on average, 40–50% of a live animal is waste, with a potential energy content close to diesel fuel. Treatment of animal waste from slaughterhouse and the subsequent conversion to electricity is investigated as a case study in the Campania Region (Italy): the animal waste undergoes a rendering process, to separate a protein-rich fraction useful for animal meal production and a fat-rich fraction, to be combusted in a diesel engine for power and heat generation (CHP). An environmental assessment of the entire process is performed by means of LCA, providing a quantitative understanding of the plant processing. The study aims to understand to what extent electricity production from animal fat is environmentally sound and if there are steps and/or components

19. Photon-number-resolving SSPDs with system detection efficiency over 50% at telecom range

Science.gov (United States)

Zolotov, P.; Divochiy, A.; Vakhtomin, Yu.; Moshkova, M.; Morozov, P.; Seleznev, V.; Smirnov, K.

2018-02-01

We used technology of making high-efficiency superconducting single-photon detectors as a basis for improvement of photon-number-resolving devices. By adding optical cavity and using an improved NbN superconducting film, we enhanced previously reported system detection efficiency at telecom range for such detectors. Our results show that implementation of optical cavity helps to develop four-section device with quantum efficiency over 50% at 1.55 µm. Performed experimental studies of detecting multi-photon optical pulses showed irregularities over defining multi-photon through single-photon quantum efficiency.

20. Scope of Various Random Number Generators in ant System Approach for TSP

Science.gov (United States)

Sen, S. K.; Shaykhian, Gholam Ali

2007-01-01

Experimented on heuristic, based on an ant system approach for traveling salesman problem, are several quasi- and pseudo-random number generators. This experiment is to explore if any particular generator is most desirable. Such an experiment on large samples has the potential to rank the performance of the generators for the foregoing heuristic. This is mainly to seek an answer to the controversial issue "which generator is the best in terms of quality of the result (accuracy) as well as cost of producing the result (time/computational complexity) in a probabilistic/statistical sense."

1. Self-organized criticality in glassy spin systems requires a diverging number of neighbors.

Science.gov (United States)

Andresen, Juan Carlos; Zhu, Zheng; Andrist, Ruben S; Katzgraber, Helmut G; Dobrosavljević, V; Zimanyi, Gergely T

2013-08-30

We investigate the conditions required for general spin systems with frustration and disorder to display self-organized criticality, a property which so far has been established only for the fully connected infinite-range Sherrington-Kirkpatrick Ising spin-glass model [Phys. Rev. Lett. 83, 1034 (1999)]. Here, we study both avalanche and magnetization jump distributions triggered by an external magnetic field, as well as internal field distributions in the short-range Edwards-Anderson Ising spin glass for various space dimensions between 2 and 8, as well as the fixed-connectivity mean-field Viana-Bray model. Our numerical results, obtained on systems of unprecedented size, demonstrate that self-organized criticality is recovered only in the strict limit of a diverging number of neighbors and is not a generic property of spin-glass models in finite space dimensions.

2. Direct residue analysis of systemic insecticides and some of their relevant metabolites in wines by liquid chromatography - mass spectrometry.

Science.gov (United States)

Berset, J D; Mermer, S; Robel, A E; Walton, V M; Chien, M L; Field, J A

2017-07-14

A direct large volume injection (DI-LVI) high performance liquid chromatography - tandem mass spectrometry (HPLC-MS/MS) method was developed and validated for the quantitative determination of 16 systemic insecticides and their main plant metabolites. The assays were conducted on commercial red and white wines made from grapes grown in major wine-producing regions nationally and internationally. Using a 1:20 dilution and an injection volume of 800μL, a limit of quantitation (LOQ) of 1μgL -1 for all analytes was achieved. Matrix-matched standards (MM) were used for accurate quantitation. Imidacloprid (IMI) and methoxyfenozide (MET) were the most frequently detected parent insecticides in the wines reaching concentrations of 1-132μgL -1 . Two important plant metabolites imidacloprid-olefin (IMI-OLE) and spirotetramat-enol (SPT-EN) were found at higher concentrations. In five samples SPT-EN was detected in the mgL -1 range with a maximum concentration of 16.3mgL -1 measured in a conventional white wine sample. Most "organic" wines contained no detectable or low insecticide residues, except for one sample, which showed the highest IMI (14.7μgL -1 ) and IMI-OLE (331μgL -1 ) concentrations. Considering the maximum residue limit (MRL) definition for the different insecticides, three "conventional" wine samples were non-compliant for SPT. This study highlights the importance to determine both parent and metabolite forms of systemic insecticides in the finished product. Copyright © 2017 Elsevier B.V. All rights reserved.

3. MULTI-OBJECTIVE OPTIMAL NUMBER AND LOCATION FOR STEEL OUTRIGGER-BELT TRUSS SYSTEM

Directory of Open Access Journals (Sweden)

MEHDI BABAEI

2017-10-01

Full Text Available During the past two decades, outrigger-belt truss system has been investigated and used in design of tall buildings. Most of the studies focused on the optimization of the system for minimum displacement and some of them proposed the best locations. In this study, however, multi-objective optimization of tall steel frames with belt trusses is investigated to minimize displacement and weight of the structure. For this purpose, structures with 20, 30, 40, and 50 stories are considered as models, based on the suggestions in the literature. The location and number of trusses and cross section of all structural elements are considered as design variables. After sizing of the structure for a specific topology and shape, weight and displacement of the structure are obtained and plotted in a diagram to illustrate trade-off between two objective functions. The results show the optimal Pareto-front solutions for different stories. Smooth trade-off and optimal number of trusses and their locations obtained.

4. Individual differences in algebraic cognition: Relation to the approximate number and semantic memory systems.

Science.gov (United States)

Geary, David C; Hoard, Mary K; Nugent, Lara; Rouder, Jeffrey N

2015-12-01

The relation between performance on measures of algebraic cognition and acuity of the approximate number system (ANS) and memory for addition facts was assessed for 171 ninth graders (92 girls) while controlling for parental education, sex, reading achievement, speed of numeral processing, fluency of symbolic number processing, intelligence, and the central executive component of working memory. The algebraic tasks assessed accuracy in placing x,y pairs in the coordinate plane, speed and accuracy of expression evaluation, and schema memory for algebra equations. ANS acuity was related to accuracy of placements in the coordinate plane and expression evaluation but not to schema memory. Frequency of fact retrieval errors was related to schema memory but not to coordinate plane or expression evaluation accuracy. The results suggest that the ANS may contribute to or be influenced by spatial-numerical and numerical-only quantity judgments in algebraic contexts, whereas difficulties in committing addition facts to long-term memory may presage slow formation of memories for the basic structure of algebra equations. More generally, the results suggest that different brain and cognitive systems are engaged during the learning of different components of algebraic competence while controlling for demographic and domain general abilities. Copyright © 2015 Elsevier Inc. All rights reserved.

5. Hardware random number generator base on monostable multivibrators dedicated for distributed measurement and control systems

Science.gov (United States)

Czernik, Pawel

2013-10-01

The hardware random number generator based on the 74121 monostable multivibrators for applications in cryptographically secure distributed measurement and control systems with asymmetric resources was presented. This device was implemented on the basis of the physical electronic vibration generator in which the circuit is composed of two "loop" 74121 monostable multivibrators, D flip-flop and external clock signal source. The clock signal, witch control D flip-flop was generated by a computer on one of the parallel port pins. There was presented programmed the author's acquisition process of random data from the measuring system to a computer. The presented system was designed, builded and thoroughly tested in the term of cryptographic security in our laboratory, what there is the most important part of this publication. Real cryptographic security was tested based on the author's software and the software environment called RDieHarder. The obtained results was here presented and analyzed in detail with particular reference to the specificity of distributed measurement and control systems with asymmetric resources.

6. Implementation of Minutiae Based Fingerprint Identification System Using Crossing Number Concept

Directory of Open Access Journals (Sweden)

Atul S. CHAUDHARI

2014-01-01

Full Text Available Biometric system is essentially a pattern recognition system which recognizes a person by determining the authenticity of a specific physiological (e.g., fingerprints, face, retina, iris or behavioral (e.g., gait, signature characteristic possessed by that person. Among all the presently employed biometric techniques, fingerprint identification systems have received the most attention due to the long history of fingerprints and its extensive use in forensics. Fingerprint is reliable biometric characteristic as it is unique and persistence. Fingerprint is the pattern of ridges and valleys on the surface of fingertip. However, recognizing fingerprints in poor quality images is still a very complex job, so the fingerprint image must be preprocessed before matching. It is very difficult to extract fingerprint features directly from gray scale fingerprint image. In this paper we have proposed the system which uses minutiae based matching algorithm for fingerprint identification. There are three main phases in proposed algorithm. First phase enhance the input fingerprint image by preprocessing it. The enhanced fingerprint image is converted into thinned binary image and then minutiae are extracted by using Crossing Number Concept in second phase. Third stage compares input fingerprint image (after preprocessing and minutiae extraction with fingerprint images enrolled in database and makes decision whether the input fingerprint is matched with the fingerprint stored in database or not.

7. Case study: Is the 'catch-all-plastics bin' useful in unlocking the hidden resource potential in the residual waste collection system?

Science.gov (United States)

Kranzinger, Lukas; Schopf, Kerstin; Pomberger, Roland; Punesch, Elisabeth

2017-02-01

Austria's performance in the collection of separated waste is adequate. However, the residual waste still contains substantial amounts of recyclable materials - for example, plastics, paper and board, glass and composite packaging. Plastics (lightweight packaging and similar non-packaging materials) are detected at an average mass content of 13% in residual waste. Despite this huge potential, only 3% of the total amount of residual waste (1,687,000 t y -1 ) is recycled. This implies that most of the recyclable materials contained in the residual waste are destined for thermal recovery and are lost for recycling. This pilot project, commissioned by the Land of Lower Austria, applied a holistic approach, unique in Europe, to the Lower Austrian waste management system. It aims to transfer excess quantities of plastic packaging and non-packaging recyclables from the residual waste system to the separately collected waste system by introducing a so-called 'catch-all-plastics bin'. A quantity flow model was constructed and the results showed a realistic increase in the amount of plastics collected of 33.9 wt%. This equals a calculated excess quantity of 19,638 t y -1 . The increased plastics collection resulted in a positive impact on the climate footprint (CO 2 equivalent) in line with the targets of EU Directive 94/62/EG (Circular Economy Package) and its Amendments. The new collection system involves only moderate additional costs.

8. QA Objectives for NDA with the Residues Segmented Gamma Scan Assay System at the Plutonium Finishing Plant (PFP)

International Nuclear Information System (INIS)

WESTSIK, G.A.

2001-01-01

The PFP facility utilizes a Segmented Gamma Scanner Assay System (SGSAS) to perform assays on cans of ash for WIPP characterization measurements. This report documents the conformance of SGSAS to the precision and accuracy radioassay QAOs, and reports the minimum detectable concentration (MDC). The QAO measurement runs supplied in this document were for a billet can geometry. The measurements were performed in August 2000. This document covers assays performed until October 27, 2000. The billet cans containing stabilized residues will be loaded into pipe overpack containers (POC) for shipment to WIPP. The WIPP-WAC defines four nominal test levels for NDA, which are in alpha curies and grams of weapons grade (WG) Pu. Due to intended utilization of the SGSAS system for the materials mentioned above, it is presently only being qualified for the two highest QAO ranges. The sources used for the QAO measurements are plutonium standards, which have been calibrated using calorimetry techniques. This report documents the analysis of test data for the SGSAS system at the nominal 10 gram and 160 gram levels. The MDC was determined using a billet can filled with diatomaceous earth but no plutonium present. Since the system is not being qualified for TRU vs low-level waste (LLW) sorting the MDC will primarily provide verification that the detection level for the system is well below the QAO ranges for which the system is being qualified. The MDC reflects the best sensitivity for a particular assay system and specific assay conditions (i.e. count time, sample configuration) when no added radioactivity is present. As such, no radioactive sources were required for the MDC determination. As with the accuracy and precision QAOs, the MDC is valid for the billet cans

9. Number names and number understanding

DEFF Research Database (Denmark)

Ejersbo, Lisser Rye; Misfeldt, Morten

2014-01-01

through using mathematical names for the numbers such as one-ten-one for 11 and five-ten-six for 56. The project combines the renaming of numbers with supporting the teaching with the new number names. Our hypothesis is that Danish children have more difficulties learning and working with numbers, because...... the Danish number names are more complicated than in other languages. Keywords: A research project in grade 0 and 1th in a Danish school, Base-10 system, two-digit number names, semiotic, cognitive perspectives....

10. MAGIK: a Monte Carlo system for computing induced residual activation dose rates

International Nuclear Information System (INIS)

Barish, J.; Gabriel, T.A.; Alsmiller, R.G. Jr.

1979-08-01

The photon dose rate from the induced activity produced by sustained bombardment of materials by neutrons and charged particles may present a significant radiation hazard. To minimize this hazard, the material configuration must be so designed that the photon dose rate decays to an acceptable level soon after the source beam is turned off. MAGIK calculates the time-independent photon dose rates that result from activities produced by nucleon-nucleus and meson-nucleus collisions over a wide range of energies. The system has been used both for high-energy accelerator studies and for fusion reactor studies. In the MAGIK system the lengthy photon transport calculations are carried out independent of time, and the time dependence is introduced in the final program, thereby permitting study of various operating scenarios with a minimum computing cost

11. Number names and number understanding

DEFF Research Database (Denmark)

Ejersbo, Lisser Rye; Misfeldt, Morten

2014-01-01

This paper concerns the results from the first year of a three-year research project involving the relationship between Danish number names and their corresponding digits in the canonical base 10 system. The project aims to develop a system to help the students’ understanding of the base 10 system...... the Danish number names are more complicated than in other languages. Keywords: A research project in grade 0 and 1th in a Danish school, Base-10 system, two-digit number names, semiotic, cognitive perspectives....

12. Multi-rate cubature Kalman filter based data fusion method with residual compensation to adapt to sampling rate discrepancy in attitude measurement system.

Science.gov (United States)

Guo, Xiaoting; Sun, Changku; Wang, Peng

2017-08-01

This paper investigates the multi-rate inertial and vision data fusion problem in nonlinear attitude measurement systems, where the sampling rate of the inertial sensor is much faster than that of the vision sensor. To fully exploit the high frequency inertial data and obtain favorable fusion results, a multi-rate CKF (Cubature Kalman Filter) algorithm with estimated residual compensation is proposed in order to adapt to the problem of sampling rate discrepancy. During inter-sampling of slow observation data, observation noise can be regarded as infinite. The Kalman gain is unknown and approaches zero. The residual is also unknown. Therefore, the filter estimated state cannot be compensated. To obtain compensation at these moments, state error and residual formulas are modified when compared with the observation data available moments. Self-propagation equation of the state error is established to propagate the quantity from the moments with observation to the moments without observation. Besides, a multiplicative adjustment factor is introduced as Kalman gain, which acts on the residual. Then the filter estimated state can be compensated even when there are no visual observation data. The proposed method is tested and verified in a practical setup. Compared with multi-rate CKF without residual compensation and single-rate CKF, a significant improvement is obtained on attitude measurement by using the proposed multi-rate CKF with inter-sampling residual compensation. The experiment results with superior precision and reliability show the effectiveness of the proposed method.

13. Preschool acuity of the approximate number system correlates with school math ability.

Science.gov (United States)

Libertus, Melissa E; Feigenson, Lisa; Halberda, Justin

2011-11-01

Previous research shows a correlation between individual differences in people's school math abilities and the accuracy with which they rapidly and nonverbally approximate how many items are in a scene. This finding is surprising because the Approximate Number System (ANS) underlying numerical estimation is shared with infants and with non-human animals who never acquire formal mathematics. However, it remains unclear whether the link between individual differences in math ability and the ANS depends on formal mathematics instruction. Earlier studies demonstrating this link tested participants only after they had received many years of mathematics education, or assessed participants' ANS acuity using tasks that required additional symbolic or arithmetic processing similar to that required in standardized math tests. To ask whether the ANS and math ability are linked early in life, we measured the ANS acuity of 200 3- to 5-year-old children using a task that did not also require symbol use or arithmetic calculation. We also measured children's math ability and vocabulary size prior to the onset of formal math instruction. We found that children's ANS acuity correlated with their math ability, even when age and verbal skills were controlled for. These findings provide evidence for a relationship between the primitive sense of number and math ability starting early in life. 2011 Blackwell Publishing Ltd.

14. Differences in the acuity of the Approximate Number System in adults: the effect of mathematical ability.

Science.gov (United States)

Guillaume, Mathieu; Nys, Julie; Mussolin, Christophe; Content, Alain

2013-11-01

15. Design of Finite Word Length Linear-Phase FIR Filters in the Logarithmic Number System Domain

Directory of Open Access Journals (Sweden)

2014-01-01

Full Text Available Logarithmic number system (LNS is an attractive alternative to realize finite-length impulse response filters because of multiplication in the linear domain being only addition in the logarithmic domain. In the literature, linear coefficients are directly replaced by the logarithmic equivalent. In this paper, an approach to directly optimize the finite word length coefficients in the LNS domain is proposed. This branch and bound algorithm is implemented based on LNS integers and several different branching strategies are proposed and evaluated. Optimal coefficients in the minimax sense are obtained and compared with the traditional finite word length representation in the linear domain as well as using rounding. Results show that the proposed method naturally provides smaller approximation error compared to rounding. Furthermore, they provide insights into finite word length properties of FIR filters coefficients in the LNS domain and show that LNS FIR filters typically provide a better approximation error compared to a standard FIR filter.

16. A closed-loop biorefining system to convert organic residues into fuels

Science.gov (United States)

Chen, Rui

This project delivers an energy positive and water neutral, closed-loop biorefining system that converts organic wastes into renewable energy and reduces the overall impacts on the environment. The research consisted of three major stages: The first stage of this project was conducted in an anaerobic co-digestion system. Effects of the ratio of dairy manure-to-food waste as well as operating temperature were tested on the performance of the co-digestion system. Results illustrated an increase in biogas productivity with the increase of supplemental food waste; fiber analysis revealed similar chemical composition (cellulose, hemicellulose and lignin) of final solid digestate regardless their different initial feedstock blends and digestion conditions. The molecular genetic analyses demonstrated that anaerobic methanogenic microorganisms were able to adjust their community assemblage to maximize biogas production and produce homogenized solid digestate. The second stage utilized electrocoagulation (EC) pretreated liquid digestate from previous stage to culture freshwater algae. Kinetics study showed a similar maximum growth rate (0.201-0.207 g TS day-1) in both 2x and 5x dilutions of EC solution; however, the algal growth was inhibited in original EC solution (1x), possibly due to the high ammonia-to-phosphate ratio. Algal community assemblage changed drastically in different dilutions of EC solution after a 9-day culture. The following semi-continuous culture in 2x and 5x EC media established steady biomass productivities and nitrogen removal rates; in addition, both conditions illustrated a phenomenon of phosphorus luxury uptake. Biomass composition analyses showed that algae cultured in medium containing higher nitrogen (2x EC medium) accumulated more protein but less carbohydrate and lipid than the 5x EC medium. The last stage involved hydrolyzing the algal biomass cultured in anaerobic digestion effluent and analyzing the effects of the neutralized algal

17. Residual risk

African Journals Online (AJOL)

ing the residual risk of transmission of HIV by blood transfusion. An epidemiological approach assumed that all HIV infections detected serologically in first-time donors were pre-existing or prevalent infections, and that all infections detected in repeat blood donors were new or incident infections. During 1986 - 1987,0,012%.

18. Rapid enumeration of low numbers of moulds in tea based drinks using an automated system.

Science.gov (United States)

Tanaka, Kouichi; Yamaguchi, Nobuyasu; Baba, Takashi; Amano, Norihide; Nasu, Masao

2011-01-31

Aseptically prepared cold drinks based on tea have become popular worldwide. Contamination of these drinks with harmful microbes is a potential health problem because such drinks are kept free from preservatives to maximize aroma and flavour. Heat-tolerant conidia and ascospores of fungi can survive pasteurization, and need to be detected as quickly as possible. We were able to rapidly and accurately detect low numbers of conidia and ascospores in tea-based drinks using fluorescent staining followed by an automated counting system. Conidia or ascospores were inoculated into green tea and oolong tea, and samples were immediately filtered through nitrocellulose membranes (pore size: 0.8 μm) to concentrate fungal propagules. These were transferred onto potato dextrose agar and incubated for 23 h at 28 °C. Fungi germinating on the membranes were fluorescently stained for 30 min. The stained mycelia were counted selectively within 90s using an automated counting system (MGS-10LD; Chuo Electric Works, Osaka, Japan). Very low numbers (1 CFU/100ml) of conidia or ascospores could be rapidly counted, in contrast to traditional labour intensive techniques. All tested mould strains were detected within 24h while conventional plate counting required 72 h for colony enumeration. Counts of slow-growing fungi (Cladosporium cladosporioides) obtained by automated counting and by conventional plate counting were close (r(2) = 0.986). Our combination of methods enables counting of both fast- and slow-growing fungi, and should be useful for microbiological quality control of tea-based and also other drinks. Copyright © 2011 Elsevier B.V. All rights reserved.

19. Time course of systemic oxidative stress and inflammatory response induced by an acute exposure to Residual Oil Fly Ash

Energy Technology Data Exchange (ETDEWEB)

2014-01-15

It is suggested that systemic oxidative stress and inflammation play a central role in the onset and progression of cardiovascular diseases associated with the exposure to particulate matter (PM). The aim of this work was to evaluate the time changes of systemic markers of oxidative stress and inflammation, after an acute exposure to Residual Oil Fly Ash (ROFA). Female Swiss mice were intranasally instilled with a ROFA suspension (1.0 mg/kg body weight) or saline solution, and plasma levels of oxidative damage markers [thiobarbituric acid reactive substances (TBARSs) and protein carbonyls], antioxidant status [reduced (GSH) and oxidized (GSSG) glutathione, ascorbic acid levels, and superoxide dismutase (SOD) activity], cytokines levels, and intravascular leukocyte activation were evaluated after 1, 3 or 5 h of exposure. Oxidative damage to lipids and decreased GSH/GSSG ratio were observed in ROFA-exposed mice as early as 1 h. Afterwards, increased protein oxidation, decreased ascorbic acid content and SOD activity were found in this group at 3 h. The onset of an adaptive response was observed at 5 h after the ROFA exposure, as indicated by decreased TBARS plasma content and increased SOD activity. The observed increase in oxidative damage to plasma macromolecules, together with systemic antioxidants depletion, may be a consequence of a systemic inflammatory response triggered by the ROFA exposure, since increased TNF-α and IL-6 plasma levels and polymorphonuclear leukocytes activation was found at every evaluated time point. These findings contribute to the understanding of the increase in cardiovascular morbidity and mortality, in association with environmental PM inhalation. - Highlights: • An acute exposure to ROFA triggers the occurrence of systemic oxidative stress. • Changes in plasmatic oxidative stress markers appear as early as 1 h after exposure. • ROFA induces proinflammatory cytokines release and intravascular leukocyte activation. • PMN

20. Farming Systems Research and Livestock Feed Development : the case of a project on feeding of crop residues in India

NARCIS (Netherlands)

Schiere, J.B.; Kiran Singh,; Boer, de A.J.

2000-01-01

Increased use of prime agricultural land for cropping and non-agricultural uses in many tropical countries implies that crop residues become more important as a source of feed for livestock. Traditionally, much research on crop residue feeding was done by focusing on laboratory measurements of feed

1. Weld Residual Stress in Corner Boxing Joints

OpenAIRE

Kazuyoshi, Matsuoka; Tokuharu, Yoshii; Ship Research Institute, Ministry of Transport; Ship Research Institute, Ministry of Transport

1998-01-01

Fatigue damage often occurs in corner boxing welded joints because of stress concentration and residual stress. The hot spot stress approach is applicable to stress concentration. However, the number of suitable methods for estimating residual stress in welded joints is limited. The purpose of this paper is to clarify the residual stress in corner boxing joints. The method of estimating residual stresses based on the inherent stress technique is presented. Residual stress measurements are per...

2. Energy conversion of biomass crops and agroindustrial residues by combined biohydrogen/biomethane system and anaerobic digestion.

Science.gov (United States)

Corneli, Elisa; Dragoni, Federico; Adessi, Alessandra; De Philippis, Roberto; Bonari, Enrico; Ragaglini, Giorgio

2016-07-01

Aim of this study was to evaluate the suitability of ensiled giant reed, ensiled maize, ensiled olive pomace, wheat bran for combined systems (CS: dark fermentation+anaerobic digestion (AD)) producing hydrogen-rich biogas (biohythane), tested in batch under basic operational conditions (mesophilic temperatures, no pH control). Substrates were also analyzed under a single stage AD batch test, in order to investigate the effects of DF on estimated energy recovery (ER) in combined systems. In CS, maize and wheat bran exhibited the highest hydrogen potential (13.8 and 18.9NLkgVS(-1)) and wheat bran the highest methane potential (243.5NLkgVS(-1)). In one-stage AD, giant reed, maize and wheat bran showed the highest methane production (239.5, 267.3 and 260.0NLkgVS(-1)). Butyrate/acetate ratio properly described the dark fermentation, correlating with hydrogen production (r=0.92). Wheat bran proved to be a promising residue for CS in terms of hydrogen/methane potential and ER. Copyright © 2016 Elsevier Ltd. All rights reserved.

3. Evaluation of Spatial Resolution for Heavy Ion CT System Based on the Measurement of Residual Range Distribution With HIMAC

Science.gov (United States)

Muraishi, H.; Nishimura, K.; Abe, S.; Satoh, H.; Hara, S.; Hara, H.; Takahashi, Y.; Mogaki, T.; Kawai, R.; Yokoyama, K.; Yasuda, N.; Tomida, T.; Ohno, Y.; Kanai, T.

2009-10-01

We report experimental results from a heavy ion CT system based on the measurement of residual range distribution using an X-ray intensifying screen and a charged coupled device (CCD) camera system. This technique was first investigated by Zygmanski (2000) for proton beams, and they reported that the spatial resolution was significantly degraded by multiple Coulomb scattering (MCS) effects in the irradiated medium. Experiments were done on the spatial resolution phantom by using helium and carbon beams accelerated up to 120 MeV/u and 230 MeV/u by the Heavy Ion Medical Accelerator in Chiba (HIMAC), installed in the National Institute of Radiological Sciences (NIRS) in Japan, using a high performance intensified CCD (ICCD) camera. We show that the MCS blurring effect can be significantly reduced in the reconstructed image by using a carbon beam with this technique. Our results suggest that heavier particles such as carbon would be more useful if this technique is envisioned as a clinical tool to obtain data that would aid proton and/or heavy ion treatment planning.

4. Targeting glutamate system for novel antipsychotic approaches: relevance for residual psychotic symptoms and treatment resistant schizophrenia.

Science.gov (United States)

de Bartolomeis, Andrea; Sarappa, Chiara; Magara, Salvatore; Iasevoli, Felice

2012-05-05

Antipsychotics are the mainstay of schizophrenia treatment. However, approximately one third of schizophrenic patients do not respond or respond poorly to antipsychotics. Therefore, there is a need for new approaches that can improve schizophrenia treatment significantly. Promising strategies arise from the modulation of glutamatergic system, according to its proposed involvement in schizophrenia pathogenesis. In this review, we critically updated preclinical and clinical data on the modulation of glutamate N-methyl-D-aspartate (NMDA) receptor activity by NMDA-Rs co-agonists, glycine transporters inhibitors, AMPAkines, mGluR5 agonists, NMDA-Rs partial agonists. We focused on: 1) preclinical results in animal models mimicking the pathophysiology of psychosis, mainly believed to be responsible of negative and cognitive symptoms, and predicting antipsychotic-like activity of these compounds; and 2) clinical efficacy in open-label and double-blind trials. Albeit promising preclinical findings for virtually all compounds, clinical efficacy has not been confirmed for D-cycloserine. Contrasting evidence has been reported for glycine and D-serine, that may however have a role as add-on agents. More promising results in humans have been found for glycine transporter inhibitors. AMPAkines appear to be beneficial as pro-cognitive agents, while positive allosteric modulators of mGluR5 have not been tested in humans. Memantine has been proposed in early stages of schizophrenia, as it may counteract the effects of glutamate excitotoxicity correlated to high glutamate levels, slowing the progression of negative symptoms associated to more advanced stages of the illness. Copyright © 2012 Elsevier B.V. All rights reserved.

5. Genetic patterns in European geometrid moths revealed by the Barcode Index Number (BIN system.

Directory of Open Access Journals (Sweden)

Axel Hausmann

Full Text Available BACKGROUND: The geometrid moths of Europe are one of the best investigated insect groups in traditional taxonomy making them an ideal model group to test the accuracy of the Barcode Index Number (BIN system of BOLD (Barcode of Life Datasystems, a method that supports automated, rapid species delineation and identification. METHODOLOGY/PRINCIPAL FINDINGS: This study provides a DNA barcode library for 219 of the 249 European geometrid moth species (88% in five selected subfamilies. The data set includes COI sequences for 2130 specimens. Most species (93% were found to possess diagnostic barcode sequences at the European level while only three species pairs (3% were genetically indistinguishable in areas of sympatry. As a consequence, 97% of the European species we examined were unequivocally discriminated by barcodes within their natural areas of distribution. We found a 1:1 correspondence between BINs and traditionally recognized species for 67% of these species. Another 17% of the species (15 pairs, three triads shared BINs, while specimens from the remaining species (18% were divided among two or more BINs. Five of these species are mixtures, both sharing and splitting BINs. For 82% of the species with two or more BINs, the genetic splits involved allopatric populations, many of which have previously been hypothesized to represent distinct species or subspecies. CONCLUSIONS/SIGNIFICANCE: This study confirms the effectiveness of DNA barcoding as a tool for species identification and illustrates the potential of the BIN system to characterize formal genetic units independently of an existing classification. This suggests the system can be used to efficiently assess the biodiversity of large, poorly known assemblages of organisms. For the moths examined in this study, cases of discordance between traditionally recognized species and BINs arose from several causes including overlooked species, synonymy, and cases where DNA barcodes revealed

6. Elicitin-induced distal systemic resistance in plants is mediated through the protein-protein interactions influenced by selected lysine residues

Directory of Open Access Journals (Sweden)

Hana eUhlíková

2016-02-01

Full Text Available Elicitins are a family of small proteins with sterol-binding activity that are secreted by Phytophthora and Pythium spp. classified as oomycete PAMPs. Although alfa- and beta-elicitins bind with the same affinity to one high affinity binding site on the plasma membrane, beta-elicitins (possessing 6-7 lysine residues are generally 50- to 100-fold more active at inducing distal HR and systemic resistance than the alfa-isoforms (with only 1-3 lysine residues.To examine the role of lysine residues in elicitin biological activity, we employed site-directed mutagenesis to prepare a series of beta-elicitin cryptogein variants with mutations on specific lysine residues. In contrast to direct infiltration of protein into leaves, application to the stem revealed a rough correlation between protein’s charge and biological activity, resulting in protection against Phytophthora parasitica. A detailed analysis of proteins’ movement in plants showed no substantial differences in distribution through phloem indicating differences in consequent apoplastic or symplastic transport. In this process, an important role of homodimer formation together with the ability to form a heterodimer with potential partner represented by endogenous plants LTPs is suggested. Our work demonstrates a key role of selected lysine residues in these interactions and stresses the importance of processes preceding elicitin recognition responsible for induction of distal systemic resistance.

7. Global Uniform Asymptotic Stability of a Class of Switched Linear Systems with an Infinite Number of Subsystems

Directory of Open Access Journals (Sweden)

L. F. Araghi

2014-01-01

Full Text Available Stability of switching systems with an infinite number of subsystems is important in some structure of systems, like fuzzy systems, neural networks, and so forth. Because of the relationship between stability of a set of matrices and switching systems, this paper first studies the stability of a set of matrices, then and the results are applied for stability of switching systems. Some new conditions for globally uniformly asymptotically stability (GUAS of discrete-time switched linear systems with an infinite number of subsystems are proposed. The paper considers some examples and simulation results.

8. Determination of an acceptable assimilable organic carbon (AOC) level for biological stability in water distribution systems with minimized chlorine residual.

Science.gov (United States)

Ohkouchi, Yumiko; Ly, Bich Thuy; Ishikawa, Suguru; Kawano, Yoshihiro; Itoh, Sadahiko

2013-02-01

There is considerable interest in minimizing the chlorine residual in Japan because of increasing complaints about a chlorinous odor in drinking water. However, minimizing the chlorine residual causes the microbiological water quality to deteriorate, and stricter control of biodegradable organics in finished water is thus needed to maintain biological stability during water distribution. In this investigation, an acceptable level of assimilable organic carbon (AOC) for biologically stable water with minimized chlorine residual was determined based on the relationship between AOC, the chlorine residual, and bacterial regrowth. In order to prepare water samples containing lower AOC, the fractions of AOC and biodegradable organic matter (BOM) in tap water samples were reduced by converting into biomass after thermal hydrolysis of BOM at alkaline conditions. The batch-mode incubations at different conditions of AOC and chlorine residual were carried out at 20 °C, and the presence or absence of bacterial regrowth was determined. The determined curve for biologically stable water indicated that the acceptable AOC was 10.9 μg C/L at a minimized chlorine residual (0.05 mg Cl(2)/L). This result indicated that AOC removal during current water treatment processes in Japan should be significantly enhanced prior to minimization of the chlorine residual in water distribution.

9. An analysis of the loss of residual heat removal system event for pressurized what reactor at reduced inventory operation

International Nuclear Information System (INIS)

Han, Kee Soo; Song, Jin Ho

1995-01-01

The loss of Residual Heat Removal System(RHRS) event during reduced inventory operation for the Korean Standard Nuclear Power Plants(KSNPPs) is simulated by RELAP5/MOD3 and RELAP5/MOD3.1. Two cases are considered; Base case for an intact Reactor Coolant System(RCS)with no vent and a vent case for an open system. Comparative simulations of base case are performed by RELAP5/MOD3 and RELAP5/MOD3.1 computer codes. The results of two simulations are generally in good qualitative and quantitative agreement. However since the results of RELAP5/MOD3 simulation reveals the deficiency of RELAP5/MOD3 wall heat model, the RELAP5/MOD3.1 computer code is used for the simulation of the vent case. The analysis results of base case show that two steam generators are insufficient to remove decay heat at one day after shutdown, where the RCS is closed. The RCS pressure increased continuously and reached the RCS temporary boundaries design pressure of 0.24 MP a around 4,000 seconds. In the vent case with a flow capacity equivalent to three times the capacity of Pressurizer safety Valve(PSV), it is shown that the RCS pressure does not reach 0.24 Mpa and core uncovery does not occur until 10,000 seconds. The detailed discussions on the results of this study suggest the feasibility of RELAP5/MOD3.1 as an analysis tool for the simulation of the loss of RHRS event at reduced inventory operation. The results of this study also provided insight for the determination of proper vent capacity. 17 figs., 6 tabs., 7 refs. (Author)

10. System for the chemical professing and evaluation gives the residual thickness the gives detecting for gives appearances LR115 type 2

International Nuclear Information System (INIS)

Carrazana Gonzalez, J.A.; Tomas Zerquera, J.; Prendes Alonso, M.

1998-01-01

In this work the system is described built in the CPHR for the homogeneous chemical processing gives detecting gives nuclear appearances. A new developed method is exposed, based on the application gives the technique optical densitometry, for the precise estimate gives the residual thickness, gives detecting, gives nuclear appearances LR115 type 2 after the process gives chemical engraving

11. A DNA-based registry for all animal species: the barcode index number (BIN system.

Directory of Open Access Journals (Sweden)

Sujeevan Ratnasingham

Full Text Available Because many animal species are undescribed, and because the identification of known species is often difficult, interim taxonomic nomenclature has often been used in biodiversity analysis. By assigning individuals to presumptive species, called operational taxonomic units (OTUs, these systems speed investigations into the patterning of biodiversity and enable studies that would otherwise be impossible. Although OTUs have conventionally been separated through their morphological divergence, DNA-based delineations are not only feasible, but have important advantages. OTU designation can be automated, data can be readily archived, and results can be easily compared among investigations. This study exploits these attributes to develop a persistent, species-level taxonomic registry for the animal kingdom based on the analysis of patterns of nucleotide variation in the barcode region of the cytochrome c oxidase I (COI gene. It begins by examining the correspondence between groups of specimens identified to a species through prior taxonomic work and those inferred from the analysis of COI sequence variation using one new (RESL and four established (ABGD, CROP, GMYC, jMOTU algorithms. It subsequently describes the implementation, and structural attributes of the Barcode Index Number (BIN system. Aside from a pragmatic role in biodiversity assessments, BINs will aid revisionary taxonomy by flagging possible cases of synonymy, and by collating geographical information, descriptive metadata, and images for specimens that are likely to belong to the same species, even if it is undescribed. More than 274,000 BIN web pages are now available, creating a biodiversity resource that is positioned for rapid growth.

12. Changing the precision of preschoolers' approximate number system representations changes their symbolic math performance.

Science.gov (United States)

Wang, Jinjing Jenny; Odic, Darko; Halberda, Justin; Feigenson, Lisa

2016-07-01

13. Changing the precision of preschoolers’ approximate number system representations changes their symbolic math performance

Science.gov (United States)

Wang, Jinjing (Jenny); Odic, Darko; Halberda, Justin; Feigenson, Lisa

2016-01-01

14. The contribution of general cognitive abilities and approximate number system to early mathematics.

Science.gov (United States)

Passolunghi, Maria Chiara; Cargnelutti, Elisa; Pastore, Massimiliano

2014-12-01

Math learning is a complex process that entails a wide range of cognitive abilities to be fulfilled. There is sufficient evidence that both general and specific cognitive skills assume a fundamental role, despite the absence of shared consensus about the relative extent of their involvement. Moreover, regarding general abilities, there is no agreement about the recruitment of the different memory components or of intelligence. In relation to specific factors, great debate subsists regarding the role of the approximate number system (ANS). Starting from these considerations, we wanted to conduct a wide assessment of memory components and ANS, by controlling for the effects associated with intelligence and also exploring possible relationships between all precursors. To achieve this purpose, a sample of 157 children was tested at both beginning and end of their Grade 1. Both general (memory and intelligence) and specific (ANS) precursors were evaluated by a wide battery of tests and put in relation to concurrent and subsequent math skills. Memory was explored in passive and active aspects involving both verbal and visuo-spatial components. Path analysis results demonstrated that memory, and especially the more active processes, and intelligence were the strongest precursors in both assessment times. ANS had a milder role which lost significance by the end of the school year. Memory and ANS seemed to influence early mathematics almost independently. Both general and specific precursors seemed to have a crucial role in early math competences, despite the lower involvement of ANS. © 2014 The British Psychological Society.

15. Application of Fuzzy Logic Inference System, Interval Numbers and Mapping Operator for Determination of Risk Level

Directory of Open Access Journals (Sweden)

Mohsen Omidvar

2015-12-01

Full Text Available Background & objective: Due to the features such as intuitive graphical appearance, ease of perception and straightforward applicability, risk matrix has become as one of the most used risk assessment tools. On the other hand, features such as the lack of precision in the classification of risk index, as well as subjective computational process, has limited its use. In order to solve this problem, in the current study we used fuzzy logic inference systems and mathematical operators (interval numbers and mapping operator. Methods: In this study, first 10 risk scenarios in the excavation and piping process were selected, then the outcome of the risk assessment were studied using four types of matrix including traditional (ORM, displaced cells (RCM , extended (ERM and fuzzy (FRM risk matrixes. Results: The results showed that the use of FRM and ERM matrix have prority, due to the high level of " Risk Tie Density" (RTD and "Risk Level Density" (RLD in the ORM and RCM matrix, as well as more accurate results presented in FRM and ERM, in risk assessment. While, FRM matrix provides more reliable results due to the application of fuzzy membership functions. Conclusion: Using new mathematical issues such as fuzzy sets and arithmetic and mapping operators for risk assessment could improve the accuracy of risk matrix and increase the reliability of the risk assessment results, when the accurate data are not available, or its data are avaliable in a limit range.

16. Assessing the Approximate Number System: no relation between numerical comparison and estimation tasks.

Science.gov (United States)

Guillaume, Mathieu; Gevers, Wim; Content, Alain

2016-03-01

Whether our general numerical skills and the mathematical knowledge that we acquire at school are entwined is a debated issue, which many researchers are still striving to investigate. The findings reported in the literature are actually inconsistent; some studies emphasized the existence of a relationship between the acuity of the Approximate Number System (ANS) and arithmetic competence, while some others did not observe any significant correlation. One potential explanation of the discrepancy might stem from the evaluation of the ANS itself. In the present study, we correlated two measures used to index ANS acuity with arithmetic performance. These measures were the Weber fraction (w), computed from a numerical comparison task and the coefficient of variation (CV), computed from a numerical estimation task. Arithmetic performance correlated with estimation CV but not with comparison w. We further investigated the meaning of this result by taking the relationship between w and CV into account. We expected a tight relation as both these measures are believed to assess ANS acuity. Crucially, however, w and CV did not correlate with each other. Moreover, the value of w was modulated by the congruity of the relation between numerical magnitude and non-numerical visual cues, potentially accounting for the lack of correlation between the measures. Our findings thus challenge the overuse of w to assess ANS acuity and more generally put into question the relevance of correlating this measure with arithmetic without any deeper understanding of what they are really indexing.

17. The nonlinear relations of the approximate number system and mathematical language to early mathematics development.

Science.gov (United States)

Purpura, David J; Logan, Jessica A R

2015-12-01

Both mathematical language and the approximate number system (ANS) have been identified as strong predictors of early mathematics performance. Yet, these relations may be different depending on a child's developmental level. The purpose of this study was to evaluate the relations between these domains across different levels of ability. Participants included 114 children who were assessed in the fall and spring of preschool on a battery of academic and cognitive tasks. Children were 3.12 to 5.26 years old (M = 4.18, SD = .58) and 53.6% were girls. Both mixed-effect and quantile regressions were conducted. The mixed-effect regressions indicated that mathematical language, but not the ANS, nor other cognitive domains, predicted mathematics performance. However, the quantile regression analyses revealed a more nuanced relation among domains. Specifically, it was found that mathematical language and the ANS predicted mathematical performance at different points on the ability continuum. These dual nonlinear relations indicate that different mechanisms may enhance mathematical acquisition dependent on children's developmental abilities. (c) 2015 APA, all rights reserved).

18. Mobile lidar system for measurement of water vapor mixing ratio and ozone number density

Science.gov (United States)

Whiteman, D.

1988-01-01

The Water Vapor Lidar was modified and extended to make differential absorption measurements of ozone. Water vapor measurements make use of a weak molecular scattering process known as Raman scattering. It is characterized by a shift in wavelength of the scattered beam of light relative to the incident one. Some of the energy of the incident photon is converted to vibrational or rotational energy within the molecule leaving the scattered photon shifted to a slightly longer wavelength. When performing water vapor measurements, profiles are acquired of water vapor mixing ratio from near the ground to beyond 7 km every 2 minutes. By forming a color composite image of the individual profiles, the spatial and temporal evolution of water vapor is visible with vertical resolution of 75 to 150m and temporal resolution of 2 minutes. The ozone lidar is intended for use as a cross calibration facility for other stationary ozone lidar systems. The ozone measurement employs the technique known as differential absorption. The backscattered laser radiation from two different wavelengths is measured. Successful measurements of 308 nm returns were made from 80 km with an averaging period of 6 hours. Using these data and a standard atmosphere density curve, an ozone number density profile was made which agrees very well with the standard ozone curve between 20 and 40 km.

19. Weighted spiking neural P systems with structural plasticity working in sequential mode based on maximum spike number

Science.gov (United States)

Sun, Mingming; Qu, Jianhua

2017-10-01

Spiking neural P systems (SNP systems, in short) are a group of parallel and distributed computing devices inspired by the function and structure of spiking neurons. Recently, a new variant of SNP systems, called SNP systems with structural plasticity (SNPSP systems, in short) was proposed. In SNPSP systems, neuron can use plasticity ru les to create and delete synapses. In this work, we consider many restrictions sequentiality on SNPSP systems: (1) neuron with the maximum number of spikes is chosen to fire; (2) we use the weighted synapses. Specifically, we investigate the computational power of weighted SNPSP systems working in the sequential mode based on maximum spike number (WSNPSPM systems, in short) and we proved that SNPSP systems with these new restrictions are universal as generating devices.

20. Collimator system for the stabilization of the dynamical residual-gas pressure in the heavy-ion synchrotron SIS18; Kollimatorsystem zur Stabilisierung des dynamischen Restgasdruckes im Schwerionensynchrotron SIS18

Energy Technology Data Exchange (ETDEWEB)

Omet, Carsten

2009-01-15

In order to achieve higher beam intensities of heavy ion beams in ring accelerators, low charge state ions can be used. By lowering the charge state, the space charge limit is shifted to higher particle numbers and stripping losses can be avoided. During test operation of the SIS18 at GSI with high intensity low charge state heavy ion beams, strong intensity dependent beam losses have been observed. It was found that these beam losses are originated to a large extent by the change of charge state of the circulating ions during collisions with residual gas atoms. The resulting deviation of m/q relative to the reference ion leads, in combination with dispersive elements in the ion optic lattice, to a modified trajectory, followed by the loss of the ion on the beam pipe. At the impact position, loosely bound residual gas molecules are released by ion stimulated desorption which increases the residual gas pressure locally. This pressure rise itself enhances the charge exchange rate, which can develop into a self amplifying process of pressure rise and subsequent beam loss. A method for the stabilization of the dynamic residual gas pressure is the use of special catcher systems, which minimize the production of desorption gases and remove them by strong pumping. Therefore, the pressure on the beam axis should remain as stable as possible. Other processes, e.g. Coulomb scattering of the beam ions by residual gas particles and unavoidable systematic beam losses can increase the gas pressure additionally. The pressure in the accelerator is further subjected to ionization of the residual gas atoms themselves, thermal out gassing of the beam pipes, insertions and pumps. In this work, a detailed numerical model of the interplay between the residual gas pressure dynamics in the accelerator, possible stabilization measures, e.g. by catchers and the resulting beam life time has been developed. The forecasted beam life times and pressures are verified by machine experiments, as

1. Number-average size model for geological systems and its application in economic geology

Directory of Open Access Journals (Sweden)

Q. F. Wang

2011-07-01

Full Text Available Various natural objects follow a number-size relationship in the fractal domain. In such relationship, the accumulative number of the objects beyond a given size shows a power-law relationship with the size. Yet in most cases, we also need to know the relationship between the accumulative number of the objects and their average size. A generalized number-size model and a number-average size model are constructed in this paper. In the number-average size model, the accumulative number shows a power-law relationship with the average size when the given size is much less than the maximum size of the objects. When the fractal dimension Ds of the number-size model is smaller than 1, the fractal dimension Ds of the number-average size model is almost equal to 1; and when Ds > 1, the Dm is approximately equal to Ds. In mineral deposits, according to the number-average size model, the ore tonnage may show a fractal relationship with the grade, as the cutoff changes for a single ore deposit. This is demonstrated by a study of the relationship between tonnage and grade in the Reshuitang epithermal hot-spring gold deposit, China.

2. Theoretical Study on Synchronous Characterization of Surface and Interfacial Mechanical Properties of Thin-Film/Substrate Systems with Residual Stress Based on Pressure Blister Test Technique

Directory of Open Access Journals (Sweden)

Zhi-xin Yang

2018-01-01

Full Text Available In this study, based on the pressure blister test technique, a theoretical study on the synchronous characterization of surface and interfacial mechanical properties of thin-film/substrate systems with residual stress was presented, where the problem of axisymmetric deformation of a blistering film with initial stress was analytically solved and its closed-form solution was presented. The expressions to determine Poisson’s ratios, Young’s modulus, and residual stress of surface thin films were derived; the work done by the applied external load and the elastic energy stored in the blistering thin film were analyzed in detail and their expressions were derived; and the interfacial adhesion energy released per unit delamination area of thin-film/substrate (i.e., energy release rate was finally presented. The synchronous characterization technique presented here has theoretically made a big step forward, due to the consideration for the residual stress in surface thin films.

3. Number Guessing

Science.gov (United States)

Sezin, Fatin

2009-01-01

It is instructive and interesting to find hidden numbers by using different positional numeration systems. Most of the present guessing techniques use the binary system expressed as less-than, greater-than or present-absent type information. This article describes how, by employing four cards having integers 1-64 written in different colours, one…

4. Development of an on-site measurement method for residual stress in primary system piping of nuclear power plants

International Nuclear Information System (INIS)

Maekawa, Akira; Takahashi, Shigeru; Fujiwara, Masaharu

2014-01-01

In residual stress measurement for large-scale pipes and vessels in high radiation areas and highly contaminated areas of nuclear plants, it is difficult to bring the radioactivated pipes and vessels out of the areas as they are. If they can brought out, it is very burdensome to handle them for the measurement. Development of an on-site measurement method of residual stress which can be quickly applied and has sufficient measurement accuracy is desirable. In this study, a new method combining an electric discharge skim-cut method with a microscopic strain measurement method using markers was proposed to realize the on-site residual stress measurement on pipes in high radiation areas and highly contaminated areas. In the electric discharge skim-cut method, a boat-type sample is skimmed out of a pipe outer/inner surface using electric discharge machining and released residual stress is measured. The on-site measurement of residual stress by the method can be done using a small, portable electric discharge machine. In the microscopic strain measurement method using markers, the residual stress is estimated by microscopic measurement of the distance between markers after the stress release. The combination of both methods can evaluate the residual stress with the same accuracy as conventional methods offer and it can achieve reduction of radiation exposure in the measurement because the work is done simply and rapidly. In this study, the applicability of the electric discharge skim-cut method was investigated because the applicability of the microscopic strain measurement method using markers was confirmed previously. The experimental examination clarified the applicable conditions for the residual stress measurement with the same accuracy as the conventional methods. Furthermore, the electric discharge machining conditions using pure water as the machining liquid was found to eliminate the amount of liquid radioactive waste completely. (author)

5. Global Analysis of Type Three Secretion System and Quorum Sensing Inhibition of Pseudomonas savastanoi by Polyphenols Extracts from Vegetable Residues.

Directory of Open Access Journals (Sweden)

Carola Biancalani

Full Text Available Protection of plants against bacterial diseases still mainly relies on the use of chemical pesticides, which in Europe correspond essentially to copper-based compounds. However, recently plant diseases control is oriented towards a rational use of molecules and extracts, generally with natural origin, with lower intrinsic toxicity and a reduced negative environmental impact. In this work, polyphenolic extracts from vegetable no food/feed residues of typical Mediterranean crops, as Olea europaea, Cynara scolymus, and Vitis vinifera were obtained and their inhibitory activity on the Type Three Secretion System (TTSS and the Quorum Sensing (QS of the Gram-negative phytopathogenic bacterium Pseudomonas savastanoi pv. nerii strain Psn23 was assessed. Extract from green tea (Camellia sinensis was used as a positive control. Collectively, the data obtained through gfp-promoter fusion system and real-time PCR show that all the polyphenolic extracts here studied have a high inhibitory activity on both the TTSS and QS of Psn23, without any depressing effect on bacterial viability. Extracts from green tea and grape seeds were shown to be the most active. Such activity was confirmed in planta by a strong reduction in the ability of Psn23 to develop hyperplastic galls on explants from adult oleander plants, as well as to elicit hypersensitive response on tobacco. By using a newly developed Congo red assay and an ELISA test, we demonstrated that the TTSS-targeted activity of these polyphenolic extracts also affects the TTSS pilus assembly. In consideration of the potential application of polyphenolic extracts in plant protection, the absence of any toxicity of these polyphenolic compounds was also assessed. A widely and evolutionary conserved molecular target such as Ca2+-ATPase, essential for the survival of any living organism, was used for the toxicity assessment.

6. Number density measurements on analytical discharge systems: application of ''hook'' spectroscopy

International Nuclear Information System (INIS)

Majidi, V.; Hsu, W.; Coleman, D.M.

1988-01-01

Various methods for determining atomic, ionic and electron number densities are reviewed. Time- and spatially-resolved number densities of sodium atoms in the post discharge environment of a high voltage spark are then quantitatively determined using the anomalous dispersion hook method. Number densities are calculated from hook separation near the Na D-lines. Lateral profiles are subsequently transformed to the radial domain using a derivative free Abel inversion process. Advantages, limitations, and practical ramification of the hook method are discussed. (author)

7. Properties making a chaotic system a good Pseudo Random Number Generator

OpenAIRE

Falcioni, Massimo; Palatella, Luigi; Pigolotti, Simone; Vulpiani, Angelo

2005-01-01

We discuss two properties making a deterministic algorithm suitable to generate a pseudo random sequence of numbers: high value of Kolmogorov-Sinai entropy and high-dimensionality. We propose the multi dimensional Anosov symplectic (cat) map as a Pseudo Random Number Generator. We show what chaotic features of this map are useful for generating Pseudo Random Numbers and investigate numerically which of them survive in the discrete version of the map. Testing and comparisons with other generat...

8. Validation of the flux number as scaling parameter for top-spray fluidised bed systems

DEFF Research Database (Denmark)

Hede, Peter Dybdahl; Bach, P.; Jensen, Anker Degn

2008-01-01

was tested in the preferred range of 3.5-4.5 as well as with a value of 4.7 in a total of 24 experiments. The agglomeration tendency was observed to decrease with increasing flux number on an overall basis, but coating conditions with flux number values below 4.5 resulted in a complete collapse of the bed....... Coating conditions with flux number values of 4.5 and 4.7 were however successful in terms of agglomeration tendency and match of particle size fractions, but indicated in addition a strong influence of nozzle pressure. The present paper suggests even narrower boundaries for the flux number compared...

9. Investigation of relation between singular points and number of limit cycles for a rotor-AMBs system

International Nuclear Information System (INIS)

Li, J.; Tian, Y.; Zhang, W.

2009-01-01

The relation between singular points and the number of limit cycles is investigated for a rotor-active magnetic bearings system with time-varying stiffness and single-degree-of-freedom. The averaged equation of the system is a perturbed polynomial Hamiltonian system of degree 5. The dynamic characteristics of the unperturbed system are first analyzed for a certain parameter group. The number of limit cycles and their configurations of the perturbed system under eight different parametric groups are obtained and the influence of eight control conditions on the number of limit cycles is studied. The results obtained here will play an important leading role in the study of the properties of nonlinear dynamics and control of the rotor-active magnetic bearings system with time-varying stiffness.

10. Examination of egg number and egg weight variables and their effects on daily management in aviary systems for laying hens

NARCIS (Netherlands)

Lokhorst, C.; Keen, A.

1995-01-01

1. Characteristics of egg numbers and mean egg weight were examined for their usefulness in the daily management of aviary systems for laying hens. 2. A number of 3238 brown Isabrown/Warren hens were housed in 1 compartment, a separated part of the house where the hens could move around freely, of a

11. A Multilayer Secure Biomedical Data Management System for Remotely Managing a Very Large Number of Diverse Personal Healthcare Devices

Directory of Open Access Journals (Sweden)

KeeHyun Park

2015-01-01

Full Text Available In this paper, a multilayer secure biomedical data management system for managing a very large number of diverse personal health devices is proposed. The system has the following characteristics: the system supports international standard communication protocols to achieve interoperability. The system is integrated in the sense that both a PHD communication system and a remote PHD management system work together as a single system. Finally, the system proposed in this paper provides user/message authentication processes to securely transmit biomedical data measured by PHDs based on the concept of a biomedical signature. Some experiments, including the stress test, have been conducted to show that the system proposed/constructed in this study performs very well even when a very large number of PHDs are used. For a stress test, up to 1,200 threads are made to represent the same number of PHD agents. The loss ratio of the ISO/IEEE 11073 messages in the normal system is as high as 14% when 1,200 PHD agents are connected. On the other hand, no message loss occurs in the multilayered system proposed in this study, which demonstrates the superiority of the multilayered system to the normal system with regard to heavy traffic.

12. Parity generator and parity checker in the modified trinary number system using savart plate and spatial light modulator

Science.gov (United States)

Ghosh, Amal K.

2010-09-01

The parity generators and the checkers are the most important circuits in communication systems. With the development of multi-valued logic (MVL), the proposed system with parity generators and checkers is the most required using the recently developed optoelectronic technology in the modified trinary number (MTN) system. This system also meets up the tremendous needs of speeds by exploiting the savart plates and spatial light modulators (SLM) in the optical tree architecture (OTA).

13. RESIDUAL RISK ASSESSMENTS - RESIDUAL RISK ...

Science.gov (United States)

This source category previously subjected to a technology-based standard will be examined to determine if health or ecological risks are significant enough to warrant further regulation for Coke Ovens. These assesments utilize existing models and data bases to examine the multi-media and multi-pollutant impacts of air toxics emissions on human health and the environment. Details on the assessment process and methodologies can be found in EPA's Residual Risk Report to Congress issued in March of 1999 (see web site). To assess the health risks imposed by air toxics emissions from Coke Ovens to determine if control technology standards previously established are adequately protecting public health.

14. Management of NORM Residues

International Nuclear Information System (INIS)

2013-06-01

The IAEA attaches great importance to the dissemination of information that can assist Member States in the development, implementation, maintenance and continuous improvement of systems, programmes and activities that support the nuclear fuel cycle and nuclear applications, and that address the legacy of past practices and accidents. However, radioactive residues are found not only in nuclear fuel cycle activities, but also in a range of other industrial activities, including: - Mining and milling of metalliferous and non-metallic ores; - Production of non-nuclear fuels, including coal, oil and gas; - Extraction and purification of water (e.g. in the generation of geothermal energy, as drinking and industrial process water; in paper and pulp manufacturing processes); - Production of industrial minerals, including phosphate, clay and building materials; - Use of radionuclides, such as thorium, for properties other than their radioactivity. Naturally occurring radioactive material (NORM) may lead to exposures at some stage of these processes and in the use or reuse of products, residues or wastes. Several IAEA publications address NORM issues with a special focus on some of the more relevant industrial operations. This publication attempts to provide guidance on managing residues arising from different NORM type industries, and on pertinent residue management strategies and technologies, to help Member States gain perspectives on the management of NORM residues

15. Regular Functions with Values in Ternary Number System on the Complex Clifford Analysis

Directory of Open Access Journals (Sweden)

Ji Eun Kim

2013-01-01

Full Text Available We define a new modified basis i^ which is an association of two bases, e1 and e2. We give an expression of the form z=x0+ i ^z0-, where x0 is a real number and z0- is a complex number on three-dimensional real skew field. And we research the properties of regular functions with values in ternary field and reduced quaternions by Clifford analysis.

16. Residual limb wounds or ulcers heal in transtibial amputees using an active suction socket system. A randomized controlled study.

Science.gov (United States)

Traballesi, M; Delussu, A S; Fusco, A; Iosa, M; Averna, T; Pellegrini, R; Brunelli, S

2012-12-01

The factors that determine successful rehabilitation after lower limb amputation have been widely investigated in the literature, but little attention has been paid to the type of prosthesis and clinical state of the residual limb, particularly the presence of open ulcers. The aim of this study was to investigate the effects of a vacuum-assisted socket system (VASS) in a sample of trans-tibial amputees with wounds or ulcers on the stump and to evaluate prosthesis use as a primary outcome. Secondary outcome measures were mobility with the prosthesis, pain associated with prosthesis use, and wound/ulcer healing. Randomized controlled study. Inpatient. Twenty dysvascular transtibial amputees suffering from ulcers due to prosthesis use or delayed wound healing post-amputation were enrolled. Participants were separated into two groups: the experimental group was trained to use a VASS prosthesis in the presence of open ulcers/wounds on the stump; and the control group was trained to use a standard suction socket system prosthesis following ulcers/wounds healing. At the end of the 12-week rehabilitation program, all VASS users were able to walk independently with their prosthesis as reflected by a median Locomotor Capability Index (LCI) value of 42, whereas only five participants in the control group were able to walk independently with a median LCI value of 21. At the two-month follow-up, the participants used their VASS prostheses for 62 hours a week (median; range: 0-91), which was significantly longer than the control group using the standard prosthesis for 5 hours per week (range: 0-56, p=0.003). At the six-month follow-up, the difference between VASS-users (80, range: 0-112 hours a weeks) and control-users (59, range: 0-91) was no longer significant (p=0.191). Despite more intense use of the prosthesis, pain and wound healing did not significantly differ between the two groups. These results showed that the VASS prosthesis allowed early fitting with prompt

17. Expert Systems: Concepts and Applications. Advances in Library Information Technology, Issue Number 1.

Science.gov (United States)

Fenly, Charles; Harris, Howard

The Processing Services department of the Library of Congress initiated a project to learn about expert systems technology and to examine potential applications of expert systems to functions in their department, e.g., acquisitions, cataloging, and serials control. (An expert system is defined as an artificial intelligence computer program which…

18. Spatial variability of residual nitrate-nitrogen under two tillage systems in central Iowa: A composite three-dimensional resistant and exploratory approach

Science.gov (United States)

Mohanty, B. P.; Kanwar, R. S.

1994-02-01

Soil nitrate-nitrogen (NO3-N) data arranged on a three-dimensional grid were analyzed to compare tillage effect on the spatial distribution of residual NO3-N in the soil profile of agricultural plots drained by subsurface tiles. A three-dimensional median-based resistant (to outlier(s)) approach was developed to polish the spatially located data on soil NO3-N affected by directional trends (nonstationarity in the mean) in three major directions (row, column, and depth) and along the horizontal diagonal directions of the grid. Effect of preferential or nonpreferential path of transport of NO3-N in the vertical direction defined as sample hole effect was also removed to make the data trend-free across holes. Composite three-dimensional semivariogram models (along horizontal and vertical directions) were used to describe the spatial structure of residual soil nitrate distribution. Two plots in the same field, one under each tillage system (conventional tillage and no tillage), were studied. In each plot, soil samples were collected at five depths (30, 60, 90, 120, and 150 cm) from 35 sites (holes) arranged on a 7×5 regular grid of 7.6×7.6 m. In the conventional tillage plot, residual NO3-N concentrations decreased gradually to a depth of 90 cm and increased beyond this depth. The coefficient of variation, however, became gradually smaller, showing more uniform distribution for greater depths. In the no-tillage plot, trends were similar to those in the conventional tillage system, but were spatially more stable across the profile. Structural analyses indicated that under conventional tillage, the semivariogram of residual soil nitrate distribution was linear in the horizontal and vertical directions. In contrast, the semivariograms for no-tillage showed nugget-type behavior, indicating a lack of spatial structure in the residual soil nitrate.

19. Pole-placement Predictive Functional Control for under-damped systems with real numbers algebra.

Science.gov (United States)

Zabet, K; Rossiter, J A; Haber, R; Abdullah, M

2017-11-01

This paper presents the new algorithm of PP-PFC (Pole-placement Predictive Functional Control) for stable, linear under-damped higher-order processes. It is shown that while conventional PFC aims to get first-order exponential behavior, this is not always straightforward with significant under-damped modes and hence a pole-placement PFC algorithm is proposed which can be tuned more precisely to achieve the desired dynamics, but exploits complex number algebra and linear combinations in order to deliver guarantees of stability and performance. Nevertheless, practical implementation is easier by avoiding complex number algebra and hence a modified formulation of the PP-PFC algorithm is also presented which utilises just real numbers while retaining the key attributes of simple algebra, coding and tuning. The potential advantages are demonstrated with numerical examples and real-time control of a laboratory plant. Copyright © 2017 ISA. All rights reserved.

20. Functional requirements for the Automated Transportation Management System: TTP number: RL 439002

Energy Technology Data Exchange (ETDEWEB)

Portsmouth, J.H. [Westinghouse Hanford Co., Richland, WA (United States)

1992-12-31

This requirements analysis, documents Department of Energy (DOE) transportation management procedures for the purpose of providing a clear and mutual understanding between users and designers of the proposed Automated Transportation Management System (ATMS). It is imperative that one understand precisely how DOE currently performs traffic management tasks; only then can an integrated system be proposed that successfully satisfies the major requirements of transportation managers and other system users. Accordingly, this report describes the current workings of DOE transportation organizations and then proposes a new system which represents a synthesis of procedures (both current and desired) which forms the basis for further systems development activities.

1. Residual nilpotence and residual solubility of groups

International Nuclear Information System (INIS)

Mikhailov, R V

2005-01-01

The properties of the residual nilpotence and the residual solubility of groups are studied. The main objects under investigation are the class of residually nilpotent groups such that each central extension of these groups is also residually nilpotent and the class of residually soluble groups such that each Abelian extension of these groups is residually soluble. Various examples of groups not belonging to these classes are constructed by homological methods and methods of the theory of modules over group rings. Several applications of the theory under consideration are presented and problems concerning the residual nilpotence of one-relator groups are considered.

2. Systemic mazindol reduces food intake in rats via suppression of meal size and meal number.

Science.gov (United States)

Wellman, P J

2008-07-01

The aim of the present study was to determine the impact of the appetite suppressant mazindol on meal pattern in rats. Meal patterns were monitored in adult male rats after mazindol dosing during the first three hours of the dark cycle using automated feeding chambers (BioDAQ). Mazindol (0, 0.25, 1.25 and 2.5 mg/kg, IP) produced a dose-dependent hypophagia and hypodipsia. Meal size and meal number were significantly suppressed by mazindol. The meal pattern findings indicate that mazindol inhibits eating in the rat via a suppression of both meal size and meal number.

3. N - Fixation of Soybean and Residual Effect from N - Fixation of Soybean to Rice Yield in Rice - Soybean Cropping System Using N - 15 Technique

International Nuclear Information System (INIS)

Yathaputanon, C.; Chaiwannakupt, P.; Prasartsrisuparb, J; Arayangul, T.

1998-01-01

A field experiment was conducted for long term rice-soybean cropping system at Chiang Mai Field Crop Research Center, to estimate nitrogen fixation of soybean and residual benefit of the soybean stover to a following rice crop. Nitrogen fixation was estimated in the soybean using 15 N dilution technique and non nodulated groundnut as a standard crop. To estimate the residual nitrogen benefit to the rice crop was calculated by nitrogen-15 yield of rice where the soybean stover was either removed or returned. In the first year soybean fixed 48.42% of their nitrogen which producing 50.31 KgN/ha. Residual effect of soybean stover returned was 36.72% of nitrogen in rice which equal 50.62 KgN/ha. come from the soybean returned (stover plus root and nodule under the ground where the soybean stover was returned). The residual nitrogen-15 in the second year was too low to detect. No nitrogen fertilizer applied to the following rice plot where the soybean stover was returned, grain dry matter yield were up to 12% (1 st year) and 27% (2 nd year) grater than in the plots where the soybean stover was removed produce the highest grain dry matter yield which were higher 14 - 29% than the plots where the soybean stover was removed

4. Inversion tillage, high residue covers, and different herbicide regimes for palmer amaranth control in liberty link systems

Science.gov (United States)

Glyphosate-resistant Palmer amaranth is adversely affecting cotton production in the Southeast US. A field experiment was established in fall 2008 at the E.V. Smith Research Center, Field Crops Unit near Shorter, AL, to investigate the role of inversion tillage, high residue cover crops, and differ...

5. Long-term C-CO2 emissions and carbon crop residue mineralization in an oxisol under different tillage and crop rotation systems

Directory of Open Access Journals (Sweden)

Ben-Hur Costa de Campos

2011-06-01

Full Text Available Soil C-CO2 emissions are sensitive indicators of management system impacts on soil organic matter (SOM. The main soil C-CO2 sources at the soil-plant interface are the decomposition of crop residues, SOM turnover, and respiration of roots and soil biota. The objectives of this study were to evaluate the impacts of tillage and cropping systems on long-term soil C-CO2 emissions and their relationship with carbon (C mineralization of crop residues. A long-term experiment was conducted in a Red Oxisol in Cruz Alta, RS, Brazil, with subtropical climate Cfa (Köppen classification, mean annual precipitation of 1,774 mm and mean annual temperature of 19.2 ºC. Treatments consisted of two tillage systems: (a conventional tillage (CT and (b no tillage (NT in combination with three cropping systems: (a R0- monoculture system (soybean/wheat, (b R1- winter crop rotation (soybean/wheat/soybean/black oat, and (c R2- intensive crop rotation (soybean/ black oat/soybean/black oat + common vetch/maize/oilseed radish/wheat. The soil C-CO2 efflux was measured every 14 days for two years (48 measurements, by trapping the CO2 in an alkaline solution. The soil gravimetric moisture in the 0-0.05 m layer was determined concomitantly with the C-CO2 efflux measurements. The crop residue C mineralization was evaluated with the mesh-bag method, with sampling 14, 28, 56, 84, 112, and 140 days after the beginning of the evaluation period for C measurements. Four C conservation indexes were used to assess the relation between C-CO2 efflux and soil C stock and its compartments. The crop residue C mineralization fit an exponential model in time. For black oat, wheat and maize residues, C mineralization was higher in CT than NT, while for soybean it was similar. Soil moisture was higher in NT than CT, mainly in the second year of evaluation. There was no difference in tillage systems for annual average C-CO2 emissions, but in some individual evaluations, differences between

6. Criterion for the selection of a system of treatment of residues and their application to the wine of the alcoholic industry

International Nuclear Information System (INIS)

Caicedo M, Luis Alfonso; Fonseca, Jose Joaquin; Rodriguez, Gerardo

1996-01-01

The selection of a system of residues treatment should follow the criterion of the process denominated BATEA (better available and feasible technical and economical process). Because their application is difficult for not having objective parameters of evaluation, a method is presented that classifies the evaluation criterions in general and specific. For the quantification of these aspects factors like FQO are used, FCI, FTR, FD and the factor of applicability of the treatment (FAT). The method applied to the wine; allows concluding that it is the evaporation the best treatment system for this process, while other systems are not developed or it increases the recompensing rate

7. A Comparative Study of Information-Based Source Number Estimation Methods and Experimental Validations on Mechanical Systems

Directory of Open Access Journals (Sweden)

Wei Cheng

2014-04-01

Full Text Available This paper investigates one eigenvalue decomposition-based source number estimation method, and three information-based source number estimation methods, namely the Akaike Information Criterion (AIC, Minimum Description Length (MDL and Bayesian Information Criterion (BIC, and improves BIC as Improved BIC (IBIC to make it more efficient and easier for calculation. The performances of the abovementioned source number estimation methods are studied comparatively with numerical case studies, which contain a linear superposition case and a both linear superposition and nonlinear modulation mixing case. A test bed with three sound sources is constructed to test the performances of these methods on mechanical systems, and source separation is carried out to validate the effectiveness of the experimental studies. This work can benefit model order selection, complexity analysis of a system, and applications of source separation to mechanical systems for condition monitoring and fault diagnosis purposes.

8. Discrete Fourier transformation processor based on complex radix (−1 + j number system

Directory of Open Access Journals (Sweden)

2017-02-01

Full Text Available Complex radix (−1 + j allows the arithmetic operations of complex numbers to be done without treating the divide and conquer rules, which offers the significant speed improvement of complex numbers computation circuitry. Design and hardware implementation of complex radix (−1 + j converter has been introduced in this paper. Extensive simulation results have been incorporated and an application of this converter towards the implementation of discrete Fourier transformation (DFT processor has been presented. The functionality of the DFT processor have been verified in Xilinx ISE design suite version 14.7 and performance parameters like propagation delay and dynamic switching power consumption have been calculated by Virtuoso platform in Cadence. The proposed DFT processor has been implemented through conversion, multiplication and addition. The performance parameter matrix in terms of delay and power consumption offered a significant improvement over other traditional implementation of DFT processor.

9. Number pronunciation in a multilingual environment and implications for an ASR system

CSIR Research Space (South Africa)

Molapo, R

2014-11-01

Full Text Available languages each with its own variation of accents and dialects. Although speakers may be classified under a certain language group, their geographic location within the country could heavily influence how they pronounce certain words. In addition... more like their dialect. This process takes a significant amount of time and the words may go through a number of transformations to reach a level of acceptance. Words that do not go through this morphological process are used without being changed...

10. Factors that Influence the Number of Students Enrolled in Higher Education Systems in Romania

Directory of Open Access Journals (Sweden)

2014-06-01

Full Text Available The present article begins with a short analysis of the scientific literature, represented by theoretical and methodological aspects regarding the regression analysis. Then, it continues with the description of the data used for analysis and econometric model construction. The present paper also presents the adjusting and forecasting curve for the data analysed, as well as the final conclusions. The general conclusion is that in the following period the number of students will increase constantly.

11. Comparison of Number of Waves Surfed and Duration Using Global Positioning System and Inertial Sensors

OpenAIRE

J. Madureira; R. Lagido; I. Sousa

2015-01-01

Surf is an increasingly popular sport and its performance evaluation is often qualitative. This work aims at using a smartphone to collect and analyze the GPS and inertial sensors data in order to obtain quantitative metrics of the surfing performance. Two approaches are compared for detection of wave rides, computing the number of waves rode in a surfing session, the starting time of each wave and its duration. The first approach is based on computing the velocity from the Global Positioning...

12. The Chinese number naming system and its impact on the arithmetic performance of pre-schoolers in Hong Kong

Science.gov (United States)

Ng, Sharon Sui Ngan

2012-06-01

Asian children, including Chinese children, perform better than their English-speaking peers in cross-national mathematics studies. This superior Asian performance is attributed to several factors including cultural beliefs, educational systems and practices, and the Chinese number naming system. Given the limited empirical evidence on pre-school mathematics learning in Chinese societies, the outcomes of Western studies are often borrowed and adopted in curriculum planning in Asian schools. The study reported in this paper investigated the performance of Hong Kong Chinese pre-school children based on Western studies involving English-speaking children, and examined the relationship between the Chinese number naming system and children's performance in number and operation concepts. Data were collected from 299 pre-school children aged between 3 and 5 years. The learning sequence of the children in mastering number and operation concepts was established using the Rasch Model. This study provides empirical evidence for the feasibility of borrowing lists of mathematics concepts from studies of English-speaking children to serve as a reference for school-based curriculum planning in a Chinese-speaking context. However, it is not enough to establish the relationship between children's performance and the Chinese number naming system. Classroom instruction and cultural beliefs in mathematics learning are also important in explaining children's performance.

13. Dependence of Error Level on the Number of Probes in Over-the-Air Multiprobe Test Systems

Directory of Open Access Journals (Sweden)

Afroza Khatun

2012-01-01

Full Text Available Development of MIMO over-the-air (OTA test methodology is ongoing. Several test methods have been proposed. Anechoic chamber-based multiple-probe technique is one promising candidate for MIMO-OTA testing. The required number of probes for synthesizing the desired fields inside the multiprobe system is an important issue as it has a large impact on the cost of the test system. In this paper, we review the existing investigations on this important topic and end up presenting rules for the required number of probes as a function of the test zone size in wavelengths for certain chosen uncertainty levels of the field synthesis.

14. Mandibular implant-supported overdentures: attachment systems, and number and locations of implants--Part I.

Science.gov (United States)

2015-01-01

The use of dental implants in replacing missing teeth is an integral part of restorative dental treatment. Use of conventional complete dentures is associated with several problems such as lack of denture stability, support and retention. However, when mandibular complete dentures were used with two or more implants, an improvement in the patients' psychological and social well-being could be seen. There is general consensus that removable implant-supported overdentures (RISOs) with two implants should be considered as the first-choice standard of care for an edentulous mandible. This treatment option necessitates the use of attachment systems that connect the complete denture to the implant. Nevertheless, each attachment system has its inherent advantages and disadvantages, which should be considered when choosing a system. The first part of this article provides an overview on options available to restore the mandibular edentulous arch with dental implants. Different types of attachment systems, their features and drawbacks are also reviewed.

15. Power Take-off System for Marine Renewable Devices, CRADA Number CRD-14-566

Energy Technology Data Exchange (ETDEWEB)

Muljadi, Eduard [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-09-13

Ocean Renewable Power Company (ORPC) proposes a project to develop and test innovative second-generation power take-off (PTO) components for the U.S. Department of Energy's 2013 FOA: Marine and Hydrokinetic System Performance Advancement, Topic Area 2 (Project). Innovative PTO components will include new and improved designs for bearings, couplings and a subsea electrical generator. Specific project objectives include the following: (1) Develop components for an advanced PTO suitable for MHK devices; (2) Bench test these components; (3) Assess the component and system performance benefits; (4) Perform a system integration study to integrate these components into an ORPC hydrokinetic turbine. National Renewable Energy Laboratory (NREL) will participate on the ORPC lead team to review design of the generator and will provide guidance on the design. Based on inputs from the project team, NREL will also provide an economic analysis of the impacts of the proposed system performance advancements.

16. Extending Birthday Paradox Theory to Estimate the Number of Tags in RFID Systems

OpenAIRE

Shakiba, Masoud; Singh, Mandeep Jit; Sundararajan, Elankovan; Zavvari, Azam; Islam, Mohammad Tariqul

2014-01-01

The main objective of Radio Frequency Identification systems is to provide fast identification for tagged objects. However, there is always a chance of collision, when tags transmit their data to the reader simultaneously. Collision is a time-consuming event that reduces the performance of RFID systems. Consequently, several anti-collision algorithms have been proposed in the literature. Dynamic Framed Slotted ALOHA (DFSA) is one of the most popular of these algorithms. DFSA dynamically modif...

17. Study of passive residual heat removal system of a modular small PWR reactor; Estudo do sistema passivo de remoção de calor residual de um reator PWR pequeno modular

Energy Technology Data Exchange (ETDEWEB)

Araujo, Nathália N., E-mail: nathalianunes@poli.ufrj.br [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Departamento de Engenharia Nuclear; Faccini, José L.H., E-mail: faccini@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Su, Jian, E-mail: sujian@lasme.coppe.ufrj.br [Coordenacao de Pos-Graduacao e Pesquisa de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear

2017-07-01

This paper presents a study on the passive residual heat removal system (PRHRS) of a small modular nuclear reactor (SMR) of 75MW. More advanced nuclear reactors, such as generation III + and IV, have passive safety systems that automatically go into action in order to prevent accidents. The purpose of the PRHRS is to transfer the decay heat from the reactor's nuclear fuel, keeping the core cooled after the plant has shut down. It starts operating in the event of fall of power supply to the nuclear station, or in the event of an unavailability of the steam generator water supply system. Removal of decay heat from the core of the reactor is accomplished by the flow of the primary refrigerant by natural circulation through heat exchangers located in a pool filled with water located above the core. The natural circulation is caused by the density gradient between the reactor core and the pool. A thermal and comparative analysis of the PRHRS was performed consisting of the resolution of the mass conservation equations, amount of movement and energy and using incompressible fluid approximations with the Boussinesq approximation. Calculations were performed with the aid of Mathematica software. A design of the heat exchanger and the cooling water tank was done so that the core of the reactor remained cooled for 72 hours using only the PRHRS.

18. Selective conversion of cellulose in corncob residue to levulinic acid in an aluminum trichloride-sodium chloride system.

Science.gov (United States)

Li, Jianmei; Jiang, Zhicheng; Hu, Libin; Hu, Changwei

2014-09-01

Increased energy consumption and environmental concerns have driven efforts to produce chemicals from renewable biomass with high selectivity. Here, the selective conversion of cellulose in corncob residue, a process waste from the production of xylose, to levulinic acid was carried out using AlCl3 as catalyst and NaCl as promoter by a hydrothermal method at relatively low temperature. A levulinic acid yield of 46.8 mol% was obtained, and the total selectivity to levulinic acid with formic acid was beyond 90%. NaCl selectively promoted the dissolution of cellulose from corncob residue, and significantly improved the yield and selectivity to levulinic acid by inhibiting lactic acid formation in the subsequent dehydration process. Owing to the salt effect of NaCl, the obtained levulinic acid could be efficiently extracted to tetrahydrofuran from aqueous solution. The aqueous solution with AlCl3 and NaCl could be recycled 4 times. Because of the limited conversion of lignin, this process allows for the production of levulinic acid with high selectivity directly from corncob residue in a simple separation process. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

19. Resolution of U (VI)-ethanol-pyridine residual system; Resolucao do sistema residuario U (VI)-etanol-piridina

Energy Technology Data Exchange (ETDEWEB)

Ferreira, Joao Coutinho; Lainetti, Paulo E.O.; Carvalho, Fatima Maria S. de; Abrao, Alcidio [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil). Centro de Quimica e Meio Ambiente]. E-mail: jcferrei@ipen.br; lainetti@ipen.br; fatimamc@ipen.br; aabrao@ipen.br

2005-07-01

As a consequence of the quantitative analysis of uranium in uranyl sulfate and uranyl nitrate, by the Dibenzoylmetano-pyridine method, a volume of residual solution containing both reagents and ethanol was accumulated during several years. The concentration of uranium in this waste is quite low but even so its value does not allow its disposal to the environment. On the other hand it was confirmed that the separation of uranium by conventional precipitation or solvent extraction practice was not reliable. In the present work it is reported the separation of pyridine and ethanol by distillation, contained now in two fractions. Ethanol was distilled first, practically without pyridine. At the final of the distillation a residue containing the uranium was removed from the distillation flask, dried at 70 deg C and kept for its recovery. The pyridine was saved and will be destroyed by the molten salt technique. This process has being developed at IPEN and allows the complete decomposition of the organic residues to CO{sub 2} and H{sub 2}O. (author)

20. An evaluation of the residual toxicity and chemistry of a sodium hydroxide-based ballast water treatment system for freshwater ships

Science.gov (United States)

Elskus, Adria; Ingersoll, Christopher G.; Kemble, Nile E.; Echols, Kathy R.; Brumbaugh, William G.; Henquinet, Jeffrey; Watten, Barnaby J.

2015-01-01

Nonnative organisms in the ballast water of freshwater ships must be killed to prevent the spread of invasive species. The ideal ballast water treatment system (BWTS) would kill 100% of ballast water organisms with minimal residual toxicity to organisms in receiving waters. In the present study, the residual toxicity and chemistry of a BWTS was evaluated. Sodium hydroxide was added to elevate pH to >11.5 to kill ballast water organisms, then reduced to pH water under an air atmosphere (pH drifted to ≥9) or a 2.5% CO2 atmosphere (pH 7.5–8.2), then transferred to control water for 5 d to assess potential delayed toxicity. Chemical concentrations in the BWTS water met vessel discharge guidelines with the exception of concentrations of copper. There was little to no residual toxicity to cladocerans or fish, but the BWTS water was toxic to amphipods. Maintaining a neutral pH and diluting BWTS water by 50% eliminated toxicity to the amphipods. The toxicity of BWTS water would likely be minimal because of rapid dilution in the receiving water, with subsurface release likely preventing pH rise. This BWTS has the potential to become a viable method for treating ballast water released into freshwater systems.

1. An evaluation of the residual toxicity and chemistry of a sodium hydroxide-based ballast water treatment system for freshwater ships.

Science.gov (United States)

Elskus, Adria A; Ingersoll, Christopher G; Kemble, Nile E; Echols, Kathy R; Brumbaugh, William G; Henquinet, Jeffrey W; Watten, Barnaby J

2015-06-01

Nonnative organisms in the ballast water of freshwater ships must be killed to prevent the spread of invasive species. The ideal ballast water treatment system (BWTS) would kill 100% of ballast water organisms with minimal residual toxicity to organisms in receiving waters. In the present study, the residual toxicity and chemistry of a BWTS was evaluated. Sodium hydroxide was added to elevate pH to >11.5 to kill ballast water organisms, then reduced to pH pH drifted to ≥9) or a 2.5% CO2 atmosphere (pH 7.5-8.2), then transferred to control water for 5 d to assess potential delayed toxicity. Chemical concentrations in the BWTS water met vessel discharge guidelines with the exception of concentrations of copper. There was little to no residual toxicity to cladocerans or fish, but the BWTS water was toxic to amphipods. Maintaining a neutral pH and diluting BWTS water by 50% eliminated toxicity to the amphipods. The toxicity of BWTS water would likely be minimal because of rapid dilution in the receiving water, with subsurface release likely preventing pH rise. This BWTS has the potential to become a viable method for treating ballast water released into freshwater systems. © 2015 SETAC.

2. Alternate switching between MFC and MEC for H2O2 synthesis and residual removal in Bioelectro-Fenton system

DEFF Research Database (Denmark)

Zhang, Yifeng; Angelidaki, Irini

2016-01-01

Sustainable H2O2 supply and elimination of residual H2O2 are two key challenges to the Fenton processes treating recalcitrant contaminants. In this study, an innovative Bioelectro-Fenton system capable of alternate switching between microbial electrolysis cell (MEC) and microbial fuel cell (MFC......) mode of operation was developed to meet the challenges. In the MEC mode, H2O2 was electrochemically produced which reacts with Fenton’s reagent (Fe II) to form hydroxyradical. The residual H2O2 (unused H2O2) is removed as electron acceptor by switching the system to MFC mode. Complete decolorization...... and mineralization of 50 mg L-1 methylene blue (MB) was achieved in the MEC mode with apparent first order rate constants of 0.43 and 0.22 h-1, respectively. After switching to the MFC mode, residual H2O2 of 180 mg L-1 was removed at a removal rate of 4.61 mg L-1 h-1 while generating a maximum current density of 0...

3. Stresses and residual stresses optical measurements systems evaluation; Avaliacao de sistemas opticos de medicao de tensoes e tensoes residuais em dutos

Energy Technology Data Exchange (ETDEWEB)

Peixoto Filho, Flavio Tito; Goncalves Junior, Armando Albertazzi [Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil). Lab. de Metrologia e Automatizacao (LABMETRO)

2004-07-01

There is always a constant concern about the pipelines' integrity. An important control parameter is the level of total mechanical stresses acting over the pipeline. However, the loading and residual stresses acting on a pipeline are not measured in the field as much as necessary. Technical difficulties and the high cost of the nowadays techniques and the hostile measurement conditions are the main reason for that. An alternative method has been developed at the Universidade Federal de Santa Catarina (UFSC) since 1992. A new optical measurement device is used to measure strains, mechanical stresses and residual stresses acting over the structure. A metrological and functional evaluation of this system is the main focus of this paper. (author)

4. Combined local and systemic bleomycin administration in electrochemotherapy to reduce the number of treatment sessions

Directory of Open Access Journals (Sweden)

Maglietti Felipe

2016-03-01

Full Text Available Electrochemotherapy (ECT, a medical treatment widely used in human patients for tumor treatment, increases bleomycin toxicity by 1000 fold in the treated area with an objective response rate of around 80%. Despite its high response rate, there are still 20% of cases in which the patients are not responding. This could be ascribed to the fact that bleomycin, when administered systemically, is not reaching the whole tumor mass properly because of the characteristics of tumor vascularization, in which case local administration could cover areas that are unreachable by systemic administration.

5. Analysis of the Integral Response of CAREM Reactor and the Residual Heat Removal System During a Failure of the Steam Generators Feed Water System

International Nuclear Information System (INIS)

Gimenez, Marcelo; Zanocco, Pablo; Schlamp, Miguel

2000-01-01

A global analysis of the behavior of Carem-25 Reactor and Residual Heat Removal System (RHRS) to mitigate a loss of heat sink accident is done in the present work.The proposed RHRS removes 2 MW of power and is duplicated to fulfill the redundancy criteria.It consists of two condensers with two tubes in a parallel array.Each tube has 2 S CH 160 TP 347 SS and 2 m 2 of area.The RHRS design requierements (for this accidental sequence) are: Short-term: primary circuit pressure must remain below the safety valves opening set point and the condensers must not flood in order to avoid instabilities. Long-term: reach hot-shutdown condition (primary circuit pressure below 2.3 MPa) at least before 48 hrs. Short-term reactor behavior is simulated using RELAP5 with a detail nodalization of the primary circuit and RHRS.Long term performance is simulated with a simple and conservative model, assuming a saturated primary circuit. This condition is expected during RHRS operation

6. Arbitrary number of limit cycles for planar discontinuous piecewise linear differential systems with two zones

Directory of Open Access Journals (Sweden)

Denis de Carvalho Braga

2015-09-01

Full Text Available For any given positive integer $n$ we show the existence of a class of discontinuous piecewise linear differential systems with two zones in the plane having exactly $n$ hyperbolic limit cycles. Moreover, all the points on the separation boundary between the two zones are of sewing type, except the origin which is the only equilibrium point.

7. Maximizing the number of satisfied subscribers in Pub/Sub systems under capacity constraints

NARCIS (Netherlands)

Setty, V.J.; Kreitz, G; Urdaneta, G; Vitenberg, R; van Steen, M.R.

2014-01-01

Publish/subscribe (pub/sub) is a popular communication paradigm in the design of large-scale distributed systems. A provider of a pub/sub service (whether centralized, peer-assisted, or based on a federated organization of cooperatively managed servers) commonly faces a fundamental challenge: given

8. Assessment of the Knowledge of the Decimal Number System Exhibited by Students with Down Syndrome

Science.gov (United States)

Noda, Aurelia; Bruno, Alicia

2017-01-01

This paper presents an assessment of the understanding of the decimal numeral system in students with Down Syndrome (DS). We followed a methodology based on a descriptive case study involving six students with DS. We used a framework of four constructs (counting, grouping, partitioning and numerical relationships) and five levels of thinking for…

9. Pseudorandom numbers: evolutionary models in image processing, biology, and nonlinear dynamic systems

Science.gov (United States)

Yaroslavsky, Leonid P.

1996-11-01

We show that one can treat pseudo-random generators, evolutionary models of texture images, iterative local adaptive filters for image restoration and enhancement and growth models in biology and material sciences in a unified way as special cases of dynamic systems with a nonlinear feedback.

10. A Plan to Optimize the Management of Weld ID SSN Numbering System for Nuclear Power Plants in Korea

Energy Technology Data Exchange (ETDEWEB)

Yoo, Hyun Ju; Cho, Chan Hee; Kim, Jin Hoi [KHNP, Daejeon (Korea, Republic of); Park, Dong Min [ANSCO, Daejeon (Korea, Republic of)

2016-05-15

Summary Sheet Number(SSN) in the current LTP is an ID which means a weldment in a nuclear power plant. However, the SSN ID, which is unique on in a nuclear power plant, is not unique one if the weldments of entire nuclear power plant in Korea are treated in one system. Therefore, it is hard to manage the data during life time using the existing SSN ID system. It is also hard to configure the characteristics of weldment in mind because IDs implying Alloy600 and overlay weld do not exist in the existing SSN ID System. An optimized SSN numbering system managing weldments for the life time is introduced in this paper. Moreover, it is explained how to manage the SSN numbering system in the computer program system, too. The problem, which the weld is not harmoniously managed, would be solved provided adapting the new SSN ID introduced in this paper. A weld is managed during its life time from creation to extinction. The inquiry of inspection history of a concerned weld and the reference of statistics would be performed easily and rightly because the concerned weld can be accessed from anywhere connected to KHNP network such as KHNP headquater, plants and CRI.

11. On the Required Number of Antennas in a Point-to-Point Large-but-Finite MIMO System

KAUST Repository

Makki, Behrooz

2015-11-12

In this paper, we investigate the performance of the point-to-point multiple-input-multiple-output (MIMO) systems in the presence of a large but finite numbers of antennas at the transmitters and/or receivers. Considering the cases with and without hybrid automatic repeat request (HARQ) feedback, we determine the minimum numbers of the transmit/receive antennas which are required to satisfy different outage probability constraints. We study the effect of the spatial correlation between the antennas on the system performance. Also, the required number of antennas are obtained for different fading conditions. Our results show that different outage requirements can be satisfied with relatively few transmit/receive antennas. © 2015 IEEE.

12. Locomotion at Low Reynolds Number: Dynamics in Newtonian and Non-Newtonian Systems with Biomedical Applications

Science.gov (United States)

Gagnon, David A.

Swimming microorganisms such as bacteria, spermatozoa, algae, and nematodes are critical to ubiquitous biological phenomena such as disease and infection, ecosystem dynamics, and mammalian fertilization. While there has been much scientific and practical interest in studying these swimmers in Newtonian (water-like) fluids, there are fewer systematic experimental studies on swimming through non-Newtonian (non-water-like) fluids with biologically-relevant mechanical properties. These organisms commonly swim through viscoelastic, structured, or shear-rate-dependent fluids, such as blood, mucus, and living tissues. Furthermore, the small length scales of these organisms dictate that their motion is dominated by viscous forces and inertia is negligible. Using rheology, microscopy, particle tracking, and image processing techniques, we examine the interaction of low Reynolds number swimmers and non-Newtonian fluids including viscoelastic, locally-anisotropic, and shear-thinning fluids. We then apply our understanding of locomotion to the study of the genetic disease Spinal Muscular Atrophy.

13. Changes in total cell numbers of the basal ganglia in patients with multiple system atrophy - A stereological study

DEFF Research Database (Denmark)

Salvesen, Lisette; Ullerup, Birgitte H; Sunay, Fatma B

2014-01-01

Total numbers of neurons, oligodendrocytes, astrocytes, and microglia in the basal ganglia and red nucleus were estimated in brains from 11 patients with multiple system atrophy (MSA) and 11 age- and gender-matched control subjects with unbiased stereological methods. Compared to the control...

14. DETERMINING THE PREFERENCE OF GSM OPERATORS IN TURKEY WITH FUZZY TOPSIS AFTER MOBILE NUMBER PORTABILITY SYSTEM APPLICATION

Directory of Open Access Journals (Sweden)

Nihal ERGİNEL

2010-12-01

Full Text Available Mobile number portability systems is a system that can allow portability of GSM (Global System for Mobile Communications number from another operator without changing GSM number. There are several criteria to select the GSM operators by customer after this system is legal in Turkey. The main purpose of this study is to determine the market sharing in the future of GSM operators by expressing the weighting grades of selection criteria and the relationship between criteria and alternatives that include uncertainty as fuzzy triangular numbers. In this study, the selection criteria of GSM operators are defined form literature and views of customer and weighted with linguistic variables by working group. Avea, Turkcell and Vodafone that active in Turkey are graded with linguistic variables to each criterion. Analyzing linguistic variables as qualitative variables and using graded linguistic variables in a specified interval are required fuzzy multi-criteria decision making methods. Expected market sharing of GSM operators is determined by using fuzzy TOPSIS method.

15. Automatic prediction of catalytic residues by modeling residue structural neighborhood

Directory of Open Access Journals (Sweden)

Passerini Andrea

2010-03-01

Full Text Available Abstract Background Prediction of catalytic residues is a major step in characterizing the function of enzymes. In its simpler formulation, the problem can be cast into a binary classification task at the residue level, by predicting whether the residue is directly involved in the catalytic process. The task is quite hard also when structural information is available, due to the rather wide range of roles a functional residue can play and to the large imbalance between the number of catalytic and non-catalytic residues. Results We developed an effective representation of structural information by modeling spherical regions around candidate residues, and extracting statistics on the properties of their content such as physico-chemical properties, atomic density, flexibility, presence of water molecules. We trained an SVM classifier combining our features with sequence-based information and previously developed 3D features, and compared its performance with the most recent state-of-the-art approaches on different benchmark datasets. We further analyzed the discriminant power of the information provided by the presence of heterogens in the residue neighborhood. Conclusions Our structure-based method achieves consistent improvements on all tested datasets over both sequence-based and structure-based state-of-the-art approaches. Structural neighborhood information is shown to be responsible for such results, and predicting the presence of nearby heterogens seems to be a promising direction for further improvements.

16. Power generation systems for NOx reduction. CRADA final report for CRADA Number Y-1292-0111

Energy Technology Data Exchange (ETDEWEB)

Adams, D.J. [Lockheed Martin Energy Research Corp., Oak Ridge, TN (United States); Berenyi, S.G. [General Motors Corp., Indianapolis, IN (United States). Allison Gas Turbine Div.

1996-04-30

The Cooperative Research and Development Agreement (CRADA) No. Y1292-0111, between Allison Gas Turbine Division of General Motors Corporation and Lockheed Martin Energy Systems, under contract to the US Department of Energy, is entitled Power Generation Systems for NOx Reduction. The objective of this effort was to design, develop, and demonstrate an integrated turbine genset suitable for high efficiency power generation requirements. The result of this effort would have been prototype generator hardware including controllers for testing and evaluation by Allison Gas Turbine Division. The generator would have been coupled to a suitably sized and configured gas turbine engine, which would operate on a laboratory load bank. This effort leads to extensive knowledge and design capability in the most efficient and high power density generator design for mobile power generation and potentially to commercialization of these advanced technologies.

17. Concepts. The Journal of Defense Systems Aquisition Management. Autumn 1980. Volume 3. Number 4.

Science.gov (United States)

1980-01-01

Subsystem Managers are only beginning to realize that their most important assets are 8. Robert A. Sutermeister , People and Productivity (New York...weapon systems, as many development programs were stretched out because of a lack of funds to support production and fielding. The resulting "bow wave" of...reality of continually decreasing manpower resources. This means we must reverse the trend in this nation of decreasing productivity and look more

18. W-026 acceptance test plan plant control system software (submittal {number_sign} 216)

Energy Technology Data Exchange (ETDEWEB)

Watson, T.L., Fluor Daniel Hanford

1997-02-14

Acceptance Testing of the WRAP 1 Plant Control System software will be conducted throughout the construction of WRAP 1 with final testing on the glovebox software being completed in December 1996. The software tests will be broken out into five sections; one for each of the four Local Control Units and one for the supervisory software modules. The acceptance test report will contain completed copies of the software tests along with the applicable test log and completed Exception Test Reports.

19. Distribution of residues and primitive roots

quadratic residues and non-residues cases using some refinement of van der Warden's the- orem in combinatorial number theory. Therefore, in his proof, the constant p0(N) depends on the van der Warden number, which is very difficult to calculate for all N. For instance, recently, Luca and Thangadurai [8] proved that for all ...

20. Determining the optimal number of Kanban in multi-products supply chain system

Science.gov (United States)

Widyadana, G. A.; Wee, H. M.; Chang, Jer-Yuan

2010-02-01

Kanban, a key element of just-in-time system, is a re-order card or signboard giving instruction or triggering the pull system to manufacture or supply a component based on actual usage of material. There are two types of Kanban: production Kanban and withdrawal Kanban. This study uses optimal and meta-heuristic methods to determine the Kanban quantity and withdrawal lot sizes in a supply chain system. Although the mix integer programming method gives an optimal solution, it is not time efficient. For this reason, the meta-heuristic methods are suggested. In this study, a genetic algorithm (GA) and a hybrid of genetic algorithm and simulated annealing (GASA) are used. The study compares the performance of GA and GASA with that of the optimal method using MIP. The given problems show that both GA and GASA result in a near optimal solution, and they outdo the optimal method in term of run time. In addition, the GASA heuristic method gives a better performance than the GA heuristic method.

1. The effect of polycrystalline rod insertion in a low Prandtl number melt for continuous Czochralski system

Science.gov (United States)

Nam, Phil-Ouk; Son, Seung-Suk; Yi, Kyung-Woo

2010-04-01

The increased wafer size results in greater instabilities and complexities within the silicon melt, and melt flow control through the application of magnetic fields is not adequate to stabilize the melt. Therefore, continuous Czochralski systems are being studied as a solution to these issues, with higher productivity and no change in size. The purpose of this study is to observe the effects of polycrystalline rod insertion on the melt for a continuous Czochralski system. In order to observe flow patterns within the melt both broadly and specifically, we employ experimentation on a model system in tandem with numerical simulation. The rod insertion do not significantly affect near the crystal edge. In the melt height from 0.14 to 0.09 m, an asymmetric temperature distributions arise when the crystal rotation is counterclockwise direction (-15 rpm) and the crucible rotation is clockwise direction (3 rpm). The axis-symmetrical temperature distribution is formed at lower melt heights (0.08 and 0.07 m). When the melt height is 0.07 m, the axis-symmetric temperature distribution is maintained even after the rod insertion.

2. Integrated computer-enhanced remote viewing system. Quarterly report Number 5, October 1993--December 1993

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-02-22

The Interactive, Computer-Enhanced, Remote Viewing System (ICERVS) is a system designed to provide a reliable geometric description of a robotic task space in a fashion that enables robotic remediation to be carried out more efficiently and economically that with present systems. The key elements are a faithful way to store empirical data and a friendly user interface that provides an operator with timely access to all that is known about a scene. ICERVS will help an operator to analyze a scene and generate additional geometric data for automating significant portions of the remediation activity. Features that enable this include the following: storage and display of empirical sensor data; ability to update segments of the geometric description of the task space; side-by-side comparisons of a live TV scene and a computer generated view of the same scene; ability to create and display computer models of perceived objects in the task space, together with textual comments, and easy export of data to robotic world models for robot guidance.

3. Effect of disinfectant residual on the interaction between bacterial growth and assimilable organic carbon in a drinking water distribution system.

Science.gov (United States)

Li, Weiying; Zhang, Junpeng; Wang, Feng; Qian, Lin; Zhou, Yanyan; Qi, Wanqi; Chen, Jiping

2018-03-09

Public health is threatened by deteriorated water quality due to bacterial regrowth and uncontrolled growth-related problems in drinking water distribution systems (DWDSs). To investigate the scope of this problem, a two-year field study was conducted in south China. The amount of assimilable organic carbon (AOC), total cell concentrations (TCC), and intact cell concentrations (ICC) of water samples were determined by flow cytometry. The results indicated that ICC was significantly correlated to AOC concentration when the chlorine concentration was less than 0.15 mg/L, and ICC was lower at chlorine concentrations greater than 0.15 mg/L, suggesting that free chlorine level had effect on AOC and ICC. To further analyze the effect of disinfectant on AOC and bacterial growth, we designed an orthogonal experiment with different dosages of two commonly used disinfectants, chlorine and chloramine. The results demonstrated that high concentrations of free chlorine (＞0.15 mg/L) and chloramine (＞0.4 mg/L) were associated with relatively low proportions of intact cells and cultivable bacteria. Compared with chlorine, chloramine tended to cause lower AOC level and intact cells, likely because the chlorinated disinfection byproducts (DBPs) were more easily absorbed by bacteria than the chloraminated DBPs. Based on the statistical analysis of 240 water samples, ICC was limited when AOC concentration was less than 135 μg/L, while temperature and the number of small-size particles showed positive effects on ICC (P＜0.05). We conclude that the use of chloramine and controlling particle numbers should be suitable strategies to limit bacterial regrowth. Copyright © 2018 Elsevier Ltd. All rights reserved.

4. The ladder operator normal ordering problem for quantum confined systems and the generalization of the Stirling and Bell numbers

International Nuclear Information System (INIS)

Aleixo, A N F; Balantekin, A B

2010-01-01

We solve the normal ordering problem for the ladder operators B-hat + and B-hat - for strings in the form (B-hat + r B-hat - s ) n for supersymmetric and shape-invariant potential systems, with r, s and n positive integers. We provide exact and explicit expressions for their normal form N{(B-hat + r B-hat - s ) n }, where N{...} all B-hat - are at the right side, and find that the solution involves an expansion coefficients sequence which, for r, s > 1, corresponds to the generalization, for any shape-invariant potential system, of the classical Stirling and Bell numbers. We show that these numbers are obtained for families of polynomials generated with parameters related to the forms of the supersymmetric partner potentials. We apply the general formalism to Poeschl-Teller, Morse, Scarf and self-similar potential systems.

5. The alchemy of jargon: etymologies of urologic neologisms. number 6: the language of the urogenital system.

Science.gov (United States)

Shelfer, Lochlan

2009-11-01

As the scientific community is increasingly severed from the study of linguistics, the underlying significance of their common technical words is becoming blurred. This article will focus on the genesis of terminology of the urogenital system. These notes will give a detailed background of the history of technical terms, including how they came into being, whence they were derived, and how they impacted the scientific community through the ages. In this installment, following terms are analyzed: Penis, Ampulla, Vas Deferens, Epididymis, Gonad, and Bladder. This analysis of the history and significance of scientific terms common to the urological community works towards a fortification of their power by offering a reminder of their origins.

6. W-026 acceptance test plan plant control system hardware (submittal {number_sign} 216)

Energy Technology Data Exchange (ETDEWEB)

Watson, T.L., Fluor Daniel Hanford

1997-02-14

Acceptance Testing of the WRAP 1 Plant Control System Hardware will be conducted throughout the construction of WRAP I with the final testing on the Process Area hardware being completed in November 1996. The hardware tests will be broken out by the following functional areas; Local Control Units, Operator Control Stations in the WRAP Control Room, DMS Server, PCS Server, Operator Interface Units, printers, DNS terminals, WRAP Local Area Network/Communications, and bar code equipment. This document will contain completed copies of each of the hardware tests along with the applicable test logs and completed test exception reports.

7. Cycling of grain legume residue nitrogen

DEFF Research Database (Denmark)

Jensen, E.S.

1995-01-01

Symbiotic nitrogen fixation by legumes is the main input of nitrogen in ecological agriculture. The cycling of N-15-labelled mature pea (Pisum sativum L.) residues was studied during three years in small field plots and lysimeters. The residual organic labelled N declined rapidly during the initial...... management methods in order to conserve grain legume residue N sources within the soil-plant system....

8. Waste Retrieval Sluicing System Campaign Number 3 Solids Volume Transferred Calculation

International Nuclear Information System (INIS)

CAROTHERS, K.G.

1999-01-01

Waste Retrieval Sluicing System (WRSS) operations at tank 241-C-106 began on Wednesday, November 18, 1998. The purpose of this system is to retrieve and transfer the high-heat sludge from the tank for storage in double-shell tank 241-AY-102, thereby resolving the high-heat safety issue for the tank, and to demonstrate modernized past-practice retrieval technology for single-shell tank waste. Performance Agreement (PA) TWR 1.2.2, C-106 Sluicing, was established by the Department of Energy, Office of River Protection (ORP) for achieving completion of sluicing retrieval of waste from tank 241-C-106 by September 30, 1999. This level of sludge removal is defined in the PA as either removal of approximately 72 inches of sludge or removal of 172,000 gallons of sludge (approximately 62 inches) and less than 6,000 gallons (approximately 2 inches) of sludge removal per 12 hour sluice batch for three consecutive batches. Preliminary calculations of the volume of tank 241-C-106 sludge removed as of September 29, 1999 were provided to ORP documenting completion of PA TWR 1.2.2 (Allen 1999a). The purpose of this calculation is to document the final sludge volume removed from tank 241-C-106 up through September 30, 1999. Additionally, the results of an extra batch completed October 6, 1999 is included to show the total volume of sludge removed through the end of WRSS operations. The calculation of the sludge volume transferred from the tank is guided by engineering procedure HNF-SD-WM-PROC-021, Section 15.0,Rev. 3, sub-section 4.4, ''Calculation of Sludge Transferred.''

9. Comparison of aerobically-treated and untreated crop residue as a source of recycled nutrients in a recirculating hydroponic system

Science.gov (United States)

Mackowiak, C. L.; Garland, J. L.; Strayer, R. F.; Finger, B. W.; Wheeler, R. M.

1996-01-01

This study compared the growth of potato plants on nutrients recycled from inedible potato biomass. Plants were grown for 105 days in recirculating, thin-film hydroponic systems containing four separate nutrient solution treatments: (1) modified half-strength Hoagland's (control), 2) liquid effluent from a bioreactor containing inedible potato biomass, 3) filtered (0.2 micrometer) effluent, and 4) the water soluble fraction of inedible potato biomass (leachate). Approximately 50% of the total nutrient requirement in treatments 2-4 were provided (recycled) from the potato biomass. Leachate had an inhibitory effect on leaf conductance, photosynthetic rate, and growth (50% reduction in plant height and 60% reduction in tuber yield). Plants grown on bioreactor effluent (filtered or unfiltered) were similar to the control plants. These results indicated that rapidly degraded, water soluble organic material contained in the inedible biomass, i.e., material in leachate, brought about phytotoxicity in the hydroponic culture of potato. Recalcitrant, water soluble organic material accumulated in all nutrient recycling treatments (650% increase after 105 days), but no increase in rhizosphere microbial numbers was observed.

10. SREM - WRS system module number 3348 for calculating the removal flux due to point, line or disc sources

International Nuclear Information System (INIS)

Grimstone, M.J.

1978-06-01

The WRS Modular Programming System has been developed as a means by which programmes may be more efficiently constructed, maintained and modified. In this system a module is a self-contained unit typically composed of one or more Fortran routines, and a programme is constructed from a number of such modules. This report describes one WRS module, the function of which is to calculate the uncollided flux and first-collision source from a disc source in a slab geometry system, a line source at the centre of a cylindrical system or a point source at the centre of a spherical system. The information given in this manual is of use both to the programmer wishing to incorporate the module in a programme, and to the user of such a programme. (author)

11. Sports teams as complex adaptive systems: manipulating player numbers shapes behaviours during football small-sided games.

Science.gov (United States)

Silva, Pedro; Vilar, Luís; Davids, Keith; Araújo, Duarte; Garganta, Júlio

2016-01-01

Small-sided and conditioned games (SSCGs) in sport have been modelled as complex adaptive systems. Research has shown that the relative space per player (RSP) formulated in SSCGs can impact on emergent tactical behaviours. In this study we adopted a systems orientation to analyse how different RSP values, obtained through manipulations of player numbers, influenced four measures of interpersonal coordination observed during performance in SSCGs. For this purpose we calculated positional data (GPS 15 Hz) from ten U-15 football players performing in three SSCGs varying in player numbers (3v3, 4v4 and 5v5). Key measures of SSCG system behaviours included values of (1) players' dispersion, (2) teams' separateness, (3) coupling strength and time delays between participants' emerging movements, respectively. Results showed that values of participants' dispersion increased, but the teams' separateness remained identical across treatments. Coupling strength and time delay also showed consistent values across SSCGs. These results exemplified how complex adaptive systems, like football teams, can harness inherent degeneracy to maintain similar team spatial-temporal relations with opponents through changes in inter-individual coordination modes (i.e., players' dispersion). The results imply that different team behaviours might emerge at different ratios of field dimension/player numbers. Therefore, sport pedagogists should carefully evaluate the effects of changing RSP in SSCGs as a way of promoting increased or decreased pressure on players.

12. High-Reynolds Number Active Blowing Semi-Span Force Measurement System Development

Science.gov (United States)

Lynn, Keith C.; Rhew, Ray D.; Acheson, Michael J.; Jones, Gregory S.; Milholen, William E.; Goodliff, Scott L.

2012-01-01

Recent wind-tunnel tests at the NASA Langley Research Center National Transonic Facility utilized high-pressure bellows to route air to the model for evaluating aircraft circulation control. The introduction of these bellows within the Sidewall Model Support System significantly impacted the performance of the external sidewall mounted semi-span balance. As a result of this impact on the semi-span balance measurement performance, it became apparent that a new capability needed to be built into the National Transonic Facility s infrastructure to allow for performing pressure tare calibrations on the balance in order to properly characterize its performance under the influence of static bellows pressure tare loads and bellows thermal effects. The objective of this study was to design both mechanical calibration hardware and an experimental calibration design that can be employed at the facility in order to efficiently and precisely perform the necessary loadings in order to characterize the semi-span balance under the influence of multiple calibration factors (balance forces/moments and bellows pressure/temperature). Using statistical design of experiments, an experimental design was developed allowing for strategically characterizing the behavior of the semi-span balance for use in circulation control and propulsion-type flow control testing at the National Transonic Facility.

13. Review on the Influences of Bagging Treatment on Pesticide Residue in Fruits

Directory of Open Access Journals (Sweden)

ZHAO Xiao-yun

2018-02-01

Full Text Available At present, bagging technology has been widely applicated in fruit cultivation. Impact of bagging treatment on the pesticide residues have different results. On the basis of existing achievements, this paper systematically analyzed the influence of different bagging treatments on pesticide residues:such as different ways of applying pesticide, pesticide concentration, number of applying pesticide; bagging materials, bagged layer; the type of pesticide(systemic pesticide, nonendoscopic pesticide; different portions of the fruit, crop varieties and so on. The way of applying pesticide had great impact on pesticide residue, pesticide application after bagging could largely reduce the pesticide residue, and pesticide application before bagging could increase pesticide residues; The four factors including pesticide appliacation dosage, the type of pesticides and fruit portion and fruit varieties on the effects of pesticide residues, had interaction each other. The pesticide applying several times, bagging could significantly reduce pesticide residues and control within the security level. Different bagging materials could reduce pesticide residues, but the impact on pesticide residues had no significant difference. More bagging layers caused less pesticide residues.

14. A Low-Power Two-Digit Multi-dimensional Logarithmic Number System Filterbank Architecture for a Digital Hearing Aid

Directory of Open Access Journals (Sweden)

William Miller

2005-11-01

Full Text Available This paper addresses the implementation of a filterbank for digital hearing aids using a multi-dimensional logarithmic number system (MDLNS. The MDLNS, which has similar properties to the classical logarithmic number system (LNS, provides more degrees of freedom than the LNS by virtue of having two, or more, orthogonal bases and the ability to use multiple MDLNS components or digits. The logarithmic properties of the MDLNS also allow for reduced complexity multiplication and large dynamic range, and a multiple-digit MDLNS provides a considerable reduction in hardware complexity compared to a conventional LNS approach. We discuss an improved design for a two-digit 2D MDLNS filterbank implementation which reduces power and area by over two times compared to the original design.

15. Residual β-cell function and the insulin-like growth factor system in Danish children and adolescents with type 1 diabetes

DEFF Research Database (Denmark)

Sorensen, Jesper S; Birkebaek, Niels H; Bjerre, Mette

2015-01-01

CONTEXT: C-peptide-positive adults with type 1 diabetes (T1D) have higher circulating total and free IGF-1 and lower IGF binding protein 1 (IGFBP-1) than C-peptide-negative patients. Whether this is also the case in children remains unknown. OBJECTIVE: The objective of the study was to examine...... the IGF system in children/adolescents with and without residual β-cell function (RBF). DESIGN AND PATIENTS: This was a cross-sectional study containing 136 prepubertal (hereof 15 RBF positive) and 206 pubertal (hereof 42 RBF positive) children/adolescents with T1D for 3-6 years as well as 40 prepubertal...

16. Operations and Maintenance Manual for Expanded Bioventing System, Site SS-41, Former Building Number 93 (Fuel Pumping Station Number 3), Charleston Air Force Base, Charleston, South Carolina

National Research Council Canada - National Science Library

1997-01-01

This Operations and Maintenance (O&M) Manual has been created as a guide for monitoring and maintaining the performance of the expanded bioventing blower systems and vent well plumbing at Site SS-41 (Former Building...

17. The effect of ceramic thickness and number of firings on the color of two all-ceramic systems.

Science.gov (United States)

Ozturk, Ozge; Uludag, Bulent; Usumez, Aslihan; Sahin, Volkan; Celik, Gozde

2008-08-01

All-ceramic restorations have been advocated for superior esthetics, and various materials have been used to improve ceramic core strength, but there is a lack of information on how color is affected by different core substructures and fabrication procedures. The purpose of this study was to evaluate the effects of various dentin ceramic thicknesses and repeated firings on the color of lithium disilicate glass-ceramic (IPS e.max Press) and zirconium-oxide (DC-Zirkon) all-ceramic systems. Thirty disc-shaped specimens, 4 mm in diameter with a 1-mm core thickness, and 0.5-, 1-, or 1.5-mm dentin ceramic thicknesses, were made from each of 2 ceramic systems (n=10). Repeated firings (3, 5, 7, or 9) were performed, and the color of the specimens was compared with the color after the initial firing. Color differences among ceramic specimens were measured using a spectrophotometer (VITA Easyshade), and data were expressed in CIELAB system coordinates. Repeated measures ANOVA was used to analyze the data (number of firings, ceramic composition, and ceramic thickness) for significant differences. The Tukey HSD test and paired 2-tailed tests were used to perform multiple comparisons (alpha=.05). L*a*b* values of the ceramic systems were affected by the number of firings (3, 5, 7, or 9 firings) (PL*a*b* values between the number of firings and ceramic composition (PL*a*b* color data as the number of firings increased, which resulted in perceptual color changes in L*a*b* color parameters.

18. Non-Stationary Single-Channel Queuing System Features Research in Context of Number of Served Queries

Directory of Open Access Journals (Sweden)

Porshnev Sergey

2017-01-01

Full Text Available This work devoted to researching of mathematical model of non-stationary queuing system (NQS. Arrival rate in studied NQS λ(t is similar to rate which observed in practice in a real access control system of objects of mass events. Dependence of number of serviced requests from time was calculated. It is proven that the ratio value of served requests at the beginning of event to all served requests described by a deterministic function, depending on the average service rate μ¯$\\bar \\mu$ and the maximum value of the arrival rate function λ(t.

19. Relation between Hagberg-Perten falling number and acidity of wheat flour according to storage and agricultural systems

Directory of Open Access Journals (Sweden)

Petrenko Vasyl

2015-01-01

Full Text Available Wheat flour samples from three agricultural systems and two storage modes were evaluated and compared in dynamics of their titratable acidity and Falling number by Hagberg-Perten method during one year storage and their interaction. The obtained results indicate strong relationships between increasing acidity and lowering α-amylase activity using samples after biological, ecological agriculture systems and dry storage mode (without temperature control. On the other hand, intensive agriculture and cool storing (T +6±2ºS provided independent change in those indices and better technological properties for the end of the storage period.

20. Derivation of the low Mach number diphasic system. Numerical simulation in mono-dimensional geometry; Derivation du systeme diphasique bas Mach. Simulation numerique en geometrie monodimensionnelle

Energy Technology Data Exchange (ETDEWEB)

Dellacherie, St

2004-07-01

This work deals with the derivation of a diphasic low Mach number model obtained through a Mach number asymptotic expansion applied to the compressible diphasic Navier Stokes system, expansion which filters out the acoustic waves. This approach is inspired from the work of Andrew Majda giving the equations of low Mach number combustion for thin flame and for perfect gases. When the equations of state verify some thermodynamic hypothesis, we show that the low Mach number diphasic system predicts in a good way the dilatation or the compression of a bubble and has equilibrium convergence properties. Then, we propose an entropic and convergent Lagrangian scheme in mono-dimensional geometry when the fluids are perfect gases and we propose a first approach in Eulerian variables where the interface between the two fluids is captured with a level set technique. (author)

1. Shifts from specialised to generalised pollination systems in Miconieae (Melastomataceae) and their relation with anther morphology and seed number.

Science.gov (United States)

Brito, V L G; Fendrich, T G; Smidt, E C; Varassin, I G; Goldenberg, R

2016-07-01

Most species in Melastomataceae have poricidal anthers related to specialised bee buzz-pollination, while some have anthers with large openings associated to non-bee pollination systems. We tracked the evolution of anther morphology and seed number on the Miconieae phylogenetic tree to understand the evolutionary shifts in such pollination systems. Anther morphometric data and seed number were recorded for 54 taxa. Pollinators (bees, flies, wasps) were recorded for 20 available species. Ancestral state reconstruction was made using Maximum Likelihood from nrITS sequences. We used phylogenetic eigenvector regressions to estimate phylogenetic signal and the adaptive component for these traits. Species pollinated by bees or bees and wasps tend to have smaller pores and fruits with more seeds. Species pollinated by flies or flies and bees and/or wasps tend to have larger pores and fruits with less seeds. Independent evolution occurred three times for anthers with large pores and twice for fruits with few seeds. We detected a phylogenetic signal in both traits, and negative correlated evolution between them. In actinomorphic small-flowered Miconieae, changes in anther morphology can be related to generalisation in the pollination system incorporating flies and wasps as pollinators and lessening the importance of buzzing bees in such process. Differences in pollen removal and deposition may explain differences in anther morphology and seed number in Miconieae. © 2016 German Botanical Society and The Royal Botanical Society of the Netherlands.

2. A systematic review of gyrase mutations associated with fluoroquinolone-resistant Mycobacterium tuberculosis and a proposed gyrase numbering system

Science.gov (United States)

Maruri, Fernanda; Sterling, Timothy R.; Kaiga, Anne W.; Blackman, Amondrea; van der Heijden, Yuri F.; Mayer, Claudine; Cambau, Emmanuelle; Aubry, Alexandra

2012-01-01

Fluoroquinolone resistance in Mycobacterium tuberculosis has become increasingly important. A review of mutations in DNA gyrase, the fluoroquinolone target, is needed to improve the molecular detection of resistance. We performed a systematic review of studies reporting mutations in DNA gyrase genes in clinical M. tuberculosis isolates. From 42 studies that met inclusion criteria, 1220 fluoroquinolone-resistant M. tuberculosis isolates underwent sequencing of the quinolone resistance-determining region (QRDR) of gyrA; 780 (64%) had mutations. The QRDR of gyrB was sequenced in 534 resistant isolates; 17 (3%) had mutations. Mutations at gyrA codons 90, 91 or 94 were present in 654/1220 (54%) resistant isolates. Four different GyrB numbering systems were reported, resulting in mutation location discrepancies. We propose a consensus numbering system. Most fluoroquinolone-resistant M. tuberculosis isolates had mutations in DNA gyrase, but a substantial proportion did not. The proposed consensus numbering system can improve molecular detection of resistance and identification of novel mutations. PMID:22279180

3. Robust flow-batch coulometric/biamperometric titration system: determination of bromine index and bromine number of petrochemicals.

Science.gov (United States)

Pasquini, Celio; de Aquino, Emerson Vidal; das Virgens Reboucas, Marcio; Gonzaga, Fabiano Barbieri

2007-09-26

A flow-batch system was constructed and evaluated to perform coulometric titrations with biamperometric end point detection. The flow section of the system is employed for sampling by injecting a sample volume (50-300 microL) in a flow injection-like system. About 1.5 mL of a suitable carrier solution is delivered by a peristaltic pump in order to quantitatively transfer the sample to the system titration cell (2.0 mL total inner volume). The carrier contains the coulometric precursor for the titrant species. The cell contains two pairs of platinum electrodes used for coulometric generation of reagent and biamperometric detection and is actively stirred. The titrant species is generated and the titration is performed by the usual batch procedure with the excess of titrant being detected by biamperometry following the analysis of the titration curve. System operation is computer controlled and all operations are automated, including titration curve analysis and cell cleaning after the titration is ended. The system is characterized by its robustness because its operation does not depend on flow rates, and the work using coulometric methods which generate gases at the counter-electrode is not troublesome. The flow-batch system has been evaluated for determination of bromine index and bromine number (relative to the total reactive olefin content) in petrochemicals according to an ASTM procedure. Typical precision (R.S.D.) is between 0.5 and 6% for different petrochemicals whose bromine number/index vary from 1000 to 10mg of bromine per 100g of sample, respectively. Recoveries for standard additions are between 92 and 123% for 10mg of Br(2) per 100g increments and 98 to 101% for 100mg per 100g increments. Accuracy of the proposed system was evaluated against results obtained by the standard ASTM with no significant difference detected at 95% confidence level.

4. Coupled dynamics of a viscoelastically supported infinite string and a number of discrete mechanical systems moving with uniform speed

Science.gov (United States)

Roy, Soumyajit; Chakraborty, G.; DasGupta, Anirvan

2018-02-01

The mutual interaction between a number of multi degrees of freedom mechanical systems moving with uniform speed along an infinite taut string supported by a viscoelastic layer has been studied using the substructure synthesis method when base excitations of a common frequency are given to the mechanical systems. The mobility or impedance matrices of the string have been calculated analytically by Fourier transform method as well as wave propagation technique. The above matrices are used to calculate the response of the discrete mechanical systems. Special attention is paid to the contact forces between the discrete and the continuous systems which are estimated by numerical simulation. The effects of phase difference, the distance between the systems and different base excitation amplitudes on the collective behaviour of the mechanical systems are also studied. The present study has relevance to the coupled dynamic problem of more than one railway pantographs and an overhead catenary system where the pantographs are modelled as discrete systems and the catenary is modelled as a taut string supported by continuous viscoelastic layer.

5. SU-E-I-79: Effect of Number of Pinholes in Onboard Robotic Multi-Pinhole SPECT System

International Nuclear Information System (INIS)

Touch, M; Bowsher, J; Yan, S; Yin, F

2014-01-01

Purpose: To study the effect of number of pinholes for a novel Single Photon Emission Computed Tomography (SPECT) system for onboard molecular and functional imaging. Methods: Comparison studies were performed using simulation for the 49-pinhole SPECT system and a series of reductions in number of pinholes. Trajectories about the breast of a supine patient were considered. Minimum distances, radii of rotation (RORs), were determined by requirements to fully view the region of interest (ROI) and to avoid collision between the detector and the patient. Reductions in RORs translate into improvements in sensitivity. Starting from the 49-pinhole system, pinholes were removed pod by pod. The furthest two end pods in the Sup-Inf direction were removed first for their higher likelihood of alleviating the collision avoidance criteria. After iterating through different combinations of pinhole pods, and selecting three combinations, the corresponding RORs were used to analytically calculate sensitivities. Results: Based on the Methods procedure, 3 combination of pods removal were identified: 1) Superior peripheral pod 2) Inferior peripheral pod 3) both pods. RORs were reduced at only one multi-pinhole stop. Analytic calculation showed that sensitivities were reduced from 0.032 for the 49-pinhole system to 0.028 for 42-pinhole and to 0.023 for 39-pinhole system respectively. The sensitivity per pinhole detector was approximately the same for all three cases. Conclusion: For the trajectories considered, only minimal improvements in RORs were identified by removing pinhole pods. Consequently, sensitivities decreased in proportion to the number of pinholes. Studies of other anatomical sites are needed to determine if in some cases sensitivity per pinhole can be improved by removing some pinholes. PHS/NIH/NCI grant R21-CA156390-01A1

6. Evaluation of a treatment system type septic tank - filter anaerobic of upward flow for the residual waters of the ecological benefit of the coffee

International Nuclear Information System (INIS)

Sanchez C, Jose Alejandro

1997-01-01

Colombia is the first country in the production of soft coffee in the world. The benefit for humid way it makes that this quality of coffee is obtained; however, the high consumption of water in the process and the later discharge to the superficial or underground sources, they have generated an environmental problem of great magnitude. Also, the sources of water that they have been contaminated with the discharges of the liquid waste that come from benefit of coffee they present, among other, serious inconveniences to be used as supplying sources of drinkable water. In time of crop, the coffee areas and their superficial sources of water usually register high indexes of contamination like consequence of the discharges of residual waters that come from the benefit of the coffee. In the Departments of Quindio, Valle, Caldas, Antioquia, etc., they have been come executing investigations of the residuals treatment that are derived of the pulp removal of the coffee (via humid), for anaerobic methods with satisfactory results. This project had the collaboration of the Departmental Committee of Coffee of Antioquia and the Environmental Engineering of the Antioquia University and it is formulated toward the evaluation of a Anaerobic filter of Ascendant flow, FAFA, preceded of a septic tank (biological sedimentation), as a treatment system of the coffee residual waters, with a waste native of a ecological benefit area. The obtained results were satisfactory although the generated waste is very intermittent and in times that are not of coffee crop it doesn't take place; what hinders more the application of biological systems for its treatment

7. An Innovative Passive Residual Heat Removal System of an Open-Pool Type Research Reactor with Pump Flywheel and Gravity Core Cooling Tank

Directory of Open Access Journals (Sweden)

Kwon-Yeong Lee

2015-01-01

Full Text Available In an open-pool type research reactor, the primary cooling system can be designed to have a downward flow inside the core during normal operation because of the plate type fuel geometry. There is a flow inversion inside the core from the downward flow by the inertia force of the primary coolant to the upward flow by the natural circulation when the pump is turned off. To delay the flow inversion time, an innovative passive system with pump flywheel and GCCT is developed to remove the residual heat. Before the primary cooling pump starts up, the water level of the GCCT is the same as that of the reactor pool. During the primary cooling pump operation, the water in the GCCT is moved into the reactor pool because of the pump suction head. After the pump stops, the potential head generates a downward flow inside the core by moving the water from the reactor pool to the GCCT and removes the residual heat. When the water levels of the two pools are the same again, the core flow has an inversion of the flow direction, and natural circulation is developed through the flap valves.

8. Acid decomposition and thiourea leaching of silver from hazardous jarosite residues: Effect of some cations on the stability of the thiourea system.

Science.gov (United States)

Calla-Choque, D; Nava-Alonso, F; Fuentes-Aceituno, J C

2016-11-05

The recovery of silver from hazardous jarosite residues was studied employing thiourea as leaching agent at acid pH and 90°C. The stability of the thiourea in synthetic solutions was evaluated in the presence of some cations that can be present in this leaching system: cupric and ferric ions as oxidant species, and zinc, lead and iron as divalent ions. Two silver leaching methods were studied: the simultaneous jarosite decomposition-silver leaching, and the jarosite decomposition followed by the silver leaching. The study with synthetic solutions demonstrated that cupric and ferric ions have a negative effect on thiourea stability due to their oxidant properties. The effect of cupric ions is more significant than the effect of ferric ions; other studied cations (Fe(2+), Zn(2+), Pb(2+)) had no effect on the stability of thiourea. When the decomposition of jarosite and the silver leaching are carried out simultaneously, 70% of the silver can be recovered. When the acid decomposition was performed at pH 0.5 followed by the leaching step at pH 1, total silver recovery increased up to 90%. The zinc is completely dissolved with any of these processes while the lead is practically insoluble with these systems producing a lead-rich residue. Copyright © 2016 Elsevier B.V. All rights reserved.

9. Effect of Inspection Policies and Residual Value of Collected Used Products: A Mathematical Model and Genetic Algorithm for a Closed-Loop Green Manufacturing System

Directory of Open Access Journals (Sweden)

Byung Duk Song

2017-09-01

Full Text Available In the green manufacturing system that pursues the reuse of used products, the residual value of collected used products (CUP hugely affects a variety of managerial decisions to construct profitable and environmental remanufacturing plans. This paper deals with a closed-loop green manufacturing system for companies which perform both manufacturing with raw materials and remanufacturing with collected used products (CUP. The amount of CUP is assumed as a function of buy-back cost while the quality level of CUP, which means the residual value, follows a known distribution. In addition, the remanufacturing cost can differ according to the quality of the CUP. Moreover, nowadays companies are subject to existing environment-related laws such as Extended Producer Responsibility (EPR. Therefore, a company should collect more used products than its obligatory take-back quota or face fines from the government for not meeting its quota. Through the development of mathematical models, two kinds of inspection policies are examined to validate the efficiency of two different operation processes. To find a managerial solution, a genetic algorithm is proposed and tested with numerical examples.

10. DIFFUSION - WRS system module number 7539 for solving a set of multigroup diffusion equations in one dimension

International Nuclear Information System (INIS)

Grimstone, M.J.

1978-06-01

The WRS Modular Programming System has been developed as a means by which programmes may be more efficiently constructed, maintained and modified. In this system a module is a self-contained unit typically composed of one or more Fortran routines, and a programme is constructed from a number of such modules. This report describes one WRS module, the function of which is to solve a set of multigroup diffusion equations for a system represented in one-dimensional plane, cylindrical or spherical geometry. The information given in this manual is of use both to the programmer wishing to incorporate the module in a programme, and to the user of such a programme. (author)

11. Basis for Selection of a Residual Waste Retrieval System for Gunite and Associated Tank W-9 at the Oak Ridge National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Lewis, B.E

2000-10-23

Waste retrieval and transfer operations at the Gunite{trademark} and Associated Tanks (GAATs) Remediation Project have been successfully accomplished using the Tank Waste Retrieval System. This system is composed of the Modified Light-Duty Utility Arm, Houdini Vehicle, Waste Dislodging and Conveyance System, Hose Management Arm, and Sludge Conditioning System. GAAT W-9 has been used as a waste-consolidation and batch-transfer tank during the retrieval of sludges and supernatants from the seven Gunite tanks in the North and South tank farms at Oak Ridge National Laboratory. Tank W-9 was used as a staging tank for the transfers to the Melton Valley Storage Tanks (MVSTs). A total of 18 waste transfers from W-9 occurred between May 25, 1999, and March 30, 2000. Most of these transfers were accomplished using the PulsAir Mixer to mobilize and mix the slurry and a submersible retrieval-transfer pump to transfer the slurry through the Sludge Conditioning System and the {approx}1-mile long, 2-in.-diam waste-transfer line to the MVSTs. The transfers from W-9 have consisted of low-solids-content slurries with solids contents ranging from {approx}2.8 to 6.8 mg/L. Of the initial {approx}88,000 gal of wet sludge estimated in the GAATs, a total of {approx}60,451 gal have been transferred to the MVSTs via tank W-9 as of March 30, 2000. Once the waste-consolidation operations and transfers from W-9 to the MVSTs are completed, the remaining material in W-9 will be mobilized and transferred to the active waste system, Bethel Valley Evaporator Service Tank W-23. Tank W-23 will serve as a batch tank for the final waste transfers from tank W-9 to the MVSTs. This report provides a summary of the requirements and recommendations for the final waste retrieval system for tank W-9, a compilation of the sample analysis data for the sludge in W-9, and brief descriptions of the various waste-retrieval system concepts that were considered for this task. The recommended residual waste retrieval

12. Fundamentals of number theory

CERN Document Server

LeVeque, William J

1996-01-01

This excellent textbook introduces the basics of number theory, incorporating the language of abstract algebra. A knowledge of such algebraic concepts as group, ring, field, and domain is not assumed, however; all terms are defined and examples are given - making the book self-contained in this respect.The author begins with an introductory chapter on number theory and its early history. Subsequent chapters deal with unique factorization and the GCD, quadratic residues, number-theoretic functions and the distribution of primes, sums of squares, quadratic equations and quadratic fields, diopha

13. Genomic Microarray in Intellectual Disability: The Usefulness of Existing Systems in the Interpretation of Copy Number Variation.

Science.gov (United States)

Ben Khelifa, Hela; Soyah, Najla; Labalme, Audrey; Guilbert, Helene; Sanlaville, Damien; Saad, Ali; Mougou-Zerelli, Soumaya

2017-06-01

Whole genome array technology is an essential tool for the detection of a large number of copy number variants (CNVs) in patients with ID and/or multiple congenital anomalies. However, the clinical significance of some microimbalances is not known. In this article, we succeeded to detect seven new variations of unknown significance (dup12p13.33, dup2p16.3, dupXq13.2, del12q24.33, dup16p13.11, trip4q22.1, and dup9p21.3), one CNV classified as known pathogenic syndrome (del22q13.31-q33), and one CNV classified as potentially pathogenic (del11q24.3). We emphasize the role of comparative genomic hybridization arrays in the investigation of intellectual disability and evaluate the usefulness of existing systems in the interpretation of CNVs.

14. Thermal Analysis of a Thermal Energy Storage Unit to Enhance a Workshop Heating System Driven by Industrial Residual Water

Directory of Open Access Journals (Sweden)

Wenqiang Sun

2017-02-01

Full Text Available Various energy sources can be used for room heating, among which waste heat utilization has significantly improved in recent years. However, the majority of applicable waste heat resources are high-grade or stable thermal energy, while the low-grade or unstable waste heat resources, especially low-temperature industrial residual water (IRW, are insufficiently used. A thermal energy storage (TES unit with paraffin wax as a phase change material (PCM is designed to solve this problem in a pharmaceutical plant. The mathematical models are developed to simulate the heat storage and release processes of the TES unit. The crucial parameters in the recurrence formulae are determined: the phase change temperature range of the paraffin wax used is 47 to 56 °C, and the latent heat is 171.4 kJ/kg. Several thermal behaviors, such as the changes of melting radius, solidification radius, and fluid temperature, are simulated. In addition, the amount of heat transferred, the heat transfer rate, and the heat storage efficiency are discussed. It is presented that the medicine production unit could save 10.25% of energy consumption in the investigated application.

15. Peritoneal transport rate, systemic inflammation, and residual renal function determine peritoneal protein clearance in continuous ambulatory peritoneal dialysis patients.

Science.gov (United States)

Tang, Yi; Zhong, Hui; Diao, Yongshu; Qin, Min; Zhou, Xueli

2014-11-01

Peritoneal protein clearance (Pcl) is related to the mortality of patients on continuous ambulatory peritoneal dialysis (CAPD) as well as technique failure. In this prospective observational study, we aimed to investigate factors associated with the level of Pcl. We prospectively enrolled 344 prevalent CAPD patients. A standard peritoneal equilibrium test was conducted for each patient. Baseline demographics, biochemistry, and Pcl were recorded. The average Pcl of the patients was 97.40 ± 54.14 mL/day. Peritoneal transport level, serum high-sensitivity C-reactive protein (hsCRP), and residual glomerular filtration rate (rGFR) were independently related to Pcl. The standard β values were 0.53, 0.17, and -0.10, respectively. Moreover, compared with non-diabetic patients, diabetic patients had a non-significantly higher level of Pcl (104.90 ± 48.65 vs. 96.15 ± 54.97 mL/day; P = 0.06). Continuous ambulatory peritoneal dialysis patients lose a high amount of protein through the peritoneum each day. The Pcl value is positively related to the level of peritoneal transport and hsCRP and negatively related to the rGFR.

16. A constant-volume rapid exhaust dilution system for motor vehicle particulate matter number and mass measurements.

Science.gov (United States)

Maricq, M Matti; Chase, Richard E; Xu, Ning; Podsiadlik, Diane H

2003-10-01

An improved version of the constant volume sampling (CVS) methodology that overcomes a number of obstacles that exist with the current CVS dilution tunnel system used in most diesel and gasoline vehicle emissions test facilities is presented. The key feature of the new sampling system is the introduction of dilution air immediately at the vehicle tailpipe. In the present implementation, this is done concentrically through a cylindrical air filter. Elimination of the transfer hose conventionally used to connect the tailpipe to the dilution tunnel significantly reduces the hydrocarbon and particulate matter (PM) storage release artifacts that can lead to wildly incorrect particle number counts and to erroneous filter-collected PM mass. It provides accurate representations of particle size distributions for diesel vehicles by avoiding the particle coagulation that occurs in the transfer hose. Furthermore, it removes the variable delay time that otherwise exists between the time that emissions exit the tailpipe and when they are detected in the dilution tunnel. The performance of the improved CVS system is examined with respect to diesel, gasoline, and compressed natural gas vehicles.

17. Review on the Influences of Bagging Treatment on Pesticide Residue in Fruits

OpenAIRE

ZHAO Xiao-yun; XIE De-fang

2018-01-01

At present, bagging technology has been widely applicated in fruit cultivation. Impact of bagging treatment on the pesticide residues have different results. On the basis of existing achievements, this paper systematically analyzed the influence of different bagging treatments on pesticide residues:such as different ways of applying pesticide, pesticide concentration, number of applying pesticide; bagging materials, bagged layer; the type of pesticide(systemic pesticide, nonendoscopic pestici...

18. A proposed number system for the 107 cortical areas of Economo and Koskinas, and Brodmann area correlations.

Science.gov (United States)

Triarhou, Lazaros C

2007-01-01

In their Atlas of Cytoarchitectonics of the Adult Human Cerebral Cortex, Economo and Koskinas defined 54 'ground,' 76 'variant,' and 107 'modification' areas. The 107 modifications are topographically distributed as 35 frontal, 13 superior limbic, 6 insular, 18 parietal, 7 occipital, 14 temporal and 14 inferior limbic (or hippocampal). One way to make the Economo-Koskinas system more practical is to encode the complex symbol notations of the 107 cortical areas with numbers EK 1 through EK 107. The present study does that, and it further correlates Economo-Koskinas areas with Brodmann areas, based on an overview of the classical and modern neurohistological literature. Copyright (c) 2007 S. Karger AG, Basel.

19. Influence of Housing System and Number of Transported Animals on Transport-induced Mortality in Slaughter Pigs

Directory of Open Access Journals (Sweden)

Eva Voslářová

2010-01-01

Full Text Available The study monitored the effect of the housing system and the number of animals transported together on transport-induced mortality of slaughter pigs in the Czech Republic in the period from 2004 to 2008. Concerning the type of housing during the fattening, the lowest mortality rate during the subsequent transport to slaughter houses was detected among pigs fattened on solid floor (0.047% and on deep bedding (0.084%. The highest mortality during transport was detected among pigs fattened on fully or partially slatted floor (0.139%, a significant difference (p p < 0.01 compared to the load sizes of up to 40 animals.

20. Sistemas de colheita e manejo da palhada de cana-de-açúcar Harvest systems and residue management of sugarcane

Directory of Open Access Journals (Sweden)

Zigomar Menezes de Souza

2005-03-01

1. [Chemical residues and contaminants in food of animal origin in Brazil: history, legislation and actions of sanitary surveillance and other regulatory systems].

Science.gov (United States)

Spisso, Bernardete Ferraz; Nóbrega, Armi Wanderley de; Marques, Marlice Aparecida Sípoli

2009-01-01

Food safety became a relevant subject due to the increasing search for a better way of life and consciousness of the consumers to stand on one's rights to acquire healthy products. The use of substances in animals destined for human consumption requires from pharmacokinetics to residue depletion studies, with the establishment of limitative values so that do not constitute a risk to health. Beyond the substances used deliberately, others coming from environment contamination or contamination of feeding stuffs consumed by these animals may reach human through the diet. The aims of this paper are to collect and discuss the main federal acts covering chemical residues and contaminants in food of animal origin in Brazil, besides those on measures to control veterinary medicinal products and additives for use in animal nutrition. The chronological presentation of the legal basis intends to facilitate the interpretation of the acts inside respective political and economics scenarios. The actions proposed from the different agents involved into the regulatory systems are discussed from the public health point of view.

2. Safety analysis of increase in heat removal from reactor coolant system with inadvertent operation of passive residual heat removal at no-load conditions

Directory of Open Access Journals (Sweden)

Ge Shao

2015-06-01

Full Text Available The advanced passive pressurized water reactor (PWR is being constructed in China and the passive residual heat removal (PRHR system was designed to remove the decay heat. During accident scenarios with increase of heat removal from the primary coolant system, the actuation of the PRHR will enhance the cooldown of the primary coolant system. There is a risk of power excursion during the cooldown of the primary coolant system. Therefore, it is necessary to analyze the thermal hydraulic behavior of the reactor coolant system (RCS at this condition. The advanced passive PWR model, including major components in the RCS, is built by SCDAP/RELAP5 code. The thermal hydraulic behavior of the core is studied for two typical accident sequences with PRHR actuation to investigate the core cooling capability with conservative assumptions, a main steam line break (MSLB event and inadvertent opening of a steam generator (SG safety valve event. The results show that the core is ultimately shut down by the boric acid solution delivered by Core Makeup Tank (CMT injections. The effects of CMT boric acid concentration and the activation delay time on accident consequences are analyzed for MSLB, which shows that there is no consequential damage to the fuel or reactor coolant system in the selected conditions.

3. Optimization of the Coverage and Accuracy of an Indoor Positioning System with a Variable Number of Sensors

Science.gov (United States)

Domingo-Perez, Francisco; Lazaro-Galilea, Jose Luis; Bravo, Ignacio; Gardel, Alfredo; Rodriguez, David

2016-01-01

This paper focuses on optimal sensor deployment for indoor localization with a multi-objective evolutionary algorithm. Our goal is to obtain an algorithm to deploy sensors taking the number of sensors, accuracy and coverage into account. Contrary to most works in the literature, we consider the presence of obstacles in the region of interest (ROI) that can cause occlusions between the target and some sensors. In addition, we aim to obtain all of the Pareto optimal solutions regarding the number of sensors, coverage and accuracy. To deal with a variable number of sensors, we add speciation and structural mutations to the well-known non-dominated sorting genetic algorithm (NSGA-II). Speciation allows one to keep the evolution of sensor sets under control and to apply genetic operators to them so that they compete with other sets of the same size. We show some case studies of the sensor placement of an infrared range-difference indoor positioning system with a fairly complex model of the error of the measurements. The results obtained by our algorithm are compared to sensor placement patterns obtained with random deployment to highlight the relevance of using such a deployment algorithm. PMID:27338414

4. Detection of Gunshot Residues Using Mass Spectrometry

Directory of Open Access Journals (Sweden)

Regina Verena Taudte

2014-01-01

Full Text Available In recent years, forensic scientists have become increasingly interested in the detection and interpretation of organic gunshot residues (OGSR due to the increasing use of lead- and heavy metal-free ammunition. This has also been prompted by the identification of gunshot residue- (GSR- like particles in environmental and occupational samples. Various techniques have been investigated for their ability to detect OGSR. Mass spectrometry (MS coupled to a chromatographic system is a powerful tool due to its high selectivity and sensitivity. Further, modern MS instruments can detect and identify a number of explosives and additives which may require different ionization techniques. Finally, MS has been applied to the analysis of both OGSR and inorganic gunshot residue (IGSR, although the “gold standard” for analysis is scanning electron microscopy with energy dispersive X-ray microscopy (SEM-EDX. This review presents an overview of the technical attributes of currently available MS and ionization techniques and their reported applications to GSR analysis.

5. Bioenergy from sisal residues

Energy Technology Data Exchange (ETDEWEB)

Jungersen, G. [Dansk Teknologisk Inst. (Denmark); Kivaisi, A.; Rubindamayugi, M. [Univ. of Dar es Salaam (Tanzania, United Republic of)

1998-05-01

The main objectives of this report are: To analyse the bioenergy potential of the Tanzanian agro-industries, with special emphasis on the Sisal industry, the largest producer of agro-industrial residues in Tanzania; and to upgrade the human capacity and research potential of the Applied Microbiology Unit at the University of Dar es Salaam, in order to ensure a scientific and technological support for future operation and implementation of biogas facilities and anaerobic water treatment systems. The experimental work on sisal residues contains the following issues: Optimal reactor set-up and performance; Pre-treatment methods for treatment of fibre fraction in order to increase the methane yield; Evaluation of the requirement for nutrient addition; Evaluation of the potential for bioethanol production from sisal bulbs. The processing of sisal leaves into dry fibres (decortication) has traditionally been done by the wet processing method, which consumes considerable quantities of water and produces large quantities of waste water. The Tanzania Sisal Authority (TSA) is now developing a dry decortication method, which consumes less water and produces a waste product with 12-15% TS, which is feasible for treatment in CSTR systems (Continously Stirred Tank Reactors). (EG)

6. Experimental verification on the integrity and performance of the passive residual heat removal system for a SMART design with VISTA-ITL

International Nuclear Information System (INIS)

Min, Byung-Yeon; Park, Hyun-Sik; Shin, Yong-Chul; Yi, Sung-Jae

2014-01-01

Highlights: • Performance of the passive residual heat removal system. • Thermal–hydraulic behavior during the steady state operation of the PRHRS. • Natural circulation flow rate. • Small-break loss of coolant accident. - Abstract: The purpose of this paper is to verify the integrity and performance of the passive residual heat removal system (PRHRS) for the SMART design during a steady state condition. The system’s overall thermal–hydraulic behavior during the steady state operation of the PRHRS of the SMART reactor was simulated using the VISTA-ITL, a small-scale integral effect test loop for the SMART design. The PRHRS is operated properly when the reactor is shutdown considering all the operating conditions of the SMART plant. The steady-state PRHRS performance tests are divided into three conditions of 100% scaled power, 20% scaled power, and hot standby condition. The experimental results show that PRHRS’s integrity and performance are proper for these three conditions. The steady state condition was well operated to satisfy the initial test conditions presented in the test requirement, and its boundary condition was properly simulated. The natural circulation flow rate in the primary system was about 10.0%, 10.6%, and 10.6% for 100% scaled power, 20% scaled power, and hot standby condition, respectively. The PRHRS’s natural circulation flow was formed as much as 10.1%, 11.7% and 9.1% for 100% scaled power, 20% scaled power and hot standby condition of its nominal value in the early stage of the PRHRS operation, respectively

7. Recent results of measurements of evaporation residue excitation functions for 19F+194,196,198Pt and 16,18O+198Pt systems with HYRA spectrometer at IUAC

Science.gov (United States)

Behera, B. R.

2015-01-01

In this talk results of the evaporation residue (ER) cross sections for the 19F+194,196,198Pt (forming compound nuclei 213,215,217Fr) and 16,18O+198Pt (forming compound nuclei 214,216Rn) systems measured at Hybrid Recoil mass Analyzer (HYRA) spectrometer installed at the Pelletron+LINAC accelerator facility of the Inter University Accelerator Center (IUAC), New Delhi are reported. The survival probabilities of 215Fr and 217Fr with neutron numbers N = 126 are found to be lower than the survival probabilities of 215Fr and 217Fr with neutron numbers N = 128 and 130 respectively. Statistical model analysis of the ER cross sections show that an excitation energy dependent scaling factor of the finite-range rotating liquid drop model fission barrier is necessary to fit the experimental data. For the case of 214,216Rn, the experimental ER cross sections are compared with the predictions from the statistical model calculations of compound nuclear decay where Kramer's fission width is used. The strength of nuclear dissipation is treated as a free parameter in the calculations to fit the experimental data.

8. Recent results of measurements of evaporation residue excitation functions for 19F+194,196,198Pt and 16,18O+198Pt systems with HYRA spectrometer at IUAC

Directory of Open Access Journals (Sweden)

Behera B.R.

2015-01-01

Full Text Available In this talk results of the evaporation residue (ER cross sections for the 19F+194,196,198Pt (forming compound nuclei 213,215,217Fr and 16,18O+198Pt (forming compound nuclei 214,216Rn systems measured at Hybrid Recoil mass Analyzer (HYRA spectrometer installed at the Pelletron+LINAC accelerator facility of the Inter University Accelerator Center (IUAC, New Delhi are reported. The survival probabilities of 215Fr and 217Fr with neutron numbers N = 126 are found to be lower than the survival probabilities of 215Fr and 217Fr with neutron numbers N = 128 and 130 respectively. Statistical model analysis of the ER cross sections show that an excitation energy dependent scaling factor of the finite-range rotating liquid drop model fission barrier is necessary to fit the experimental data. For the case of 214,216Rn, the experimental ER cross sections are compared with the predictions from the statistical model calculations of compound nuclear decay where Kramer’s fission width is used. The strength of nuclear dissipation is treated as a free parameter in the calculations to fit the experimental data.

9. Imbalances in the German public health system - numbers of state-certified occupational physicians and relation to socioeconomic data.

Science.gov (United States)

Gyo, Christoph; Boll, Michael; Brüggmann, Dörthe; Klingelhöfer, Doris; Quarcoo, David; Groneberg, David A

2016-01-01

State-certified occupational physicians who work as civil servants in the Federal Republic of Germany are key players in the German Public Health system. They control i.e. the legal compliance in occupational health and participate in the occupational disease procedures. Despite the role model function of the German Public health system for many developing countries, this area of Public health is debated to have been hampered in the past years by a disregard concerning structural developments. Different databases were screened for occupational health benchmarks. Obtained data were compared to socioeconomic data and indices were calculated. The overall numbers of State-certified occupational physicians decreased in Germany between 1992 and 2012 from 136 to 86 (63 %). On the single state level, the ratios of State-certified occupational physicians per 1 Mio. working population ranged from 8 for the state of Saarland to 0.8 for the state of North Rhine Westphalia. A general difference was found for old versus new German states. Also, large differences were present for the ratios of State-certified occupational physicians per 10 6 employees towards public debt per capita (€) and the ratios of State-certified occupational physicians per Gross Domestic Product (GDP) in the 16 German states in 2012. In striking contrast to the WHO document on the Occupational safety and health (OSH) system that states in its executive summary that the human and institutional capacities of the German occupational health system are very strong in both quantity and quality, we here show extreme imbalances present at the single state levels that developed over the past 20 years. With a regard to the increasing complexity of the economic system a reversal of this trend should be demanded.

Energy Technology Data Exchange (ETDEWEB)

Pihl, Josh A [ORNL; West, Brian H [ORNL; Toops, Todd J [ORNL; Adelman, Brad [Navistar; Derybowski, Edward [Navistar

2011-10-01

Navistar and ORNL established this CRADA to develop diesel engine aftertreatment configurations and control strategies that could meet emissions regulations while maintaining or improving vehicle efficiency. The early years of the project focused on reducing the fuel penalty associated with lean NOx trap (LNT), also known as NOx adsorber catalyst regeneration and desulfation. While Navistar pursued engine-based (in-cylinder) approaches to LNT regeneration, complementary experiments at ORNL focused on in-exhaust fuel injection. ORNL developed a PC-based controller for transient electronic control of EGR valve position, intake throttle position, and actuation of fuel injectors in the exhaust system of a Navistar engine installed at Oak Ridge. Aftertreatment systems consisting of different diesel oxidation catalysts (DOCs) in conjunction with a diesel particle filter and LNT were evaluated under quasi-steady-state conditions. Hydrocarbon (HC) species were measured at multiple locations in the exhaust system with Gas chromatograph mass spectrometry (GC-MS) and Fourier transform infrared (FTIR) spectroscopy. Under full-load, rated speed conditions, injection of fuel upstream of the DOC reduced the fuel penalty for a given level of NOx reduction by 10-20%. GC-MS showed that fuel compounds were 'cracked' into smaller hydrocarbon species over the DOC, particularly light alkenes. GC-MS analysis of HC species entering and exiting the LNT showed high utilization of light alkenes, followed by mono-aromatics; branched alkanes passed through the LNT largely unreacted. Follow-on experiments at a 'road load' condition were conducted, revealing that the NOx reduction was better without the DOC at lower temperatures. The improved performance was attributed to the large swings in the NOx adsorber core temperature. Split-injection experiments were conducted with ultra-low sulfur diesel fuel and three pure HC compounds: 1-pentene, toluene, and iso-octane. The pure

11. Sagan numbers

OpenAIRE

Mendonça, J. Ricardo G.

2012-01-01

We define a new class of numbers based on the first occurrence of certain patterns of zeros and ones in the expansion of irracional numbers in a given basis and call them Sagan numbers, since they were first mentioned, in a special case, by the North-american astronomer Carl E. Sagan in his science-fiction novel "Contact." Sagan numbers hold connections with a wealth of mathematical ideas. We describe some properties of the newly defined numbers and indicate directions for further amusement.

12. Fibonacci numbers

CERN Document Server

Vorob'ev, Nikolai Nikolaevich

2011-01-01

Fibonacci numbers date back to an 800-year-old problem concerning the number of offspring born in a single year to a pair of rabbits. This book offers the solution and explores the occurrence of Fibonacci numbers in number theory, continued fractions, and geometry. A discussion of the ""golden section"" rectangle, in which the lengths of the sides can be expressed as a ration of two successive Fibonacci numbers, draws upon attempts by ancient and medieval thinkers to base aesthetic and philosophical principles on the beauty of these figures. Recreational readers as well as students and teacher

13. Copy Number Variations in Amyotrophic Lateral Sclerosis: Piecing the Mosaic Tiles Together through a Systems Biology Approach.

Science.gov (United States)

Morello, Giovanna; Guarnaccia, Maria; Spampinato, Antonio Gianmaria; La Cognata, Valentina; D'Agata, Velia; Cavallaro, Sebastiano

2018-02-01

Amyotrophic lateral sclerosis (ALS) is a devastating and still untreatable motor neuron disease. Despite the molecular mechanisms underlying ALS pathogenesis that are still far from being understood, several studies have suggested the importance of a genetic contribution in both familial and sporadic forms of the disease. In addition to single-nucleotide polymorphisms (SNPs), which account for only a limited number of ALS cases, a consistent number of common and rare copy number variations (CNVs) have been associated to ALS. Most of the CNV-based association studies use a traditional candidate-gene approach that is inadequate for uncovering the genetic architectures of complex traits like ALS. The emergent paradigm of "systems biology" may offer a new perspective to better interpret the wide spectrum of CNVs in ALS, enabling the characterization of the complex network of gene products underlying ALS pathogenesis. In this review, we will explore the landscape of CNVs in ALS, putting specific emphasis on the functional impact of common CNV regions and genes consistently associated with increased risk of developing disease. In addition, we will discuss the potential contribution of multiple rare CNVs in ALS pathogenesis, focusing our attention on the complex mechanisms by which these proteins might impact, individually or in combination, the genetic susceptibility of ALS. The comprehensive detection and functional characterization of common and rare candidate risk CNVs in ALS susceptibility may bring new pieces into the intricate mosaic of ALS pathogenesis, providing interesting and important implications for a more precise molecular biomarker-assisted diagnosis and more effective and personalized treatments.

14. Soil carbon storage and stratification under different tillage/residue-management practices in double rice cropping system

NARCIS (Netherlands)

Chen, Z.; Zhang, H.; dikgwatlhe, S.B.; Xue, J.; Qiu, K.; Tang, H.; Chen, F.

2015-01-01

The importance of soil organic carbon (SOC) sequestration in agricultural soils as climate-change-mitigating strategy has become an area of focus by the scientific community in relation to soil management. This study was conducted to determine the temporal effect of different tillage systems and

15. Identification of Respiratory Syncytial Virus Nonstructural Protein 2 Residues Essential for Exploitation of the Host Ubiquitin System and Inhibition of Innate Immune Responses.

Science.gov (United States)

Whelan, Jillian N; Tran, Kim C; van Rossum, Damian B; Teng, Michael N

2016-07-15

Respiratory syncytial virus (RSV) is a leading cause of lower respiratory tract infection in young children worldwide. The RSV nonstructural protein 2 (NS2) is a multifunctional protein that primarily acts to antagonize the innate immune system by targeting STAT2 for proteasomal degradation. We investigated the structural determinants of NS2 important for interaction with the host ubiquitin system to degrade STAT2 during infection. We found that NS2 expression enhances ubiquitination of host proteins. Bioinformatics analysis provided a platform for identification of specific residues that limit NS2-induced ubiquitination. Combinations of multiple mutations displayed an additive effect on reducing NS2-induced ubiquitination. Using a reverse genetics system, we generated recombinant RSV (rRSV) containing NS2 ubiquitin mutations, which maintained their effect on ubiquitin expression during infection. Interestingly, STAT2 degradation activity was ablated in the NS2 ubiquitin mutant rRSV. In addition, NS2 ubiquitin mutations decreased rRSV replication, indicating a correlation between NS2's ubiquitin function and antagonism of innate immune signaling to enhance viral replication. Our approach of targeting NS2 residues required for NS2 inhibition of immune responses provides a mechanism for attenuating RSV for vaccine development. RSV has been circulating globally for more than 60 years, causing severe respiratory disease in pediatric, elderly, and immunocompromised populations. Production of a safe, effective vaccine against RSV is a public health priority. The NS2 protein is an effective target for prevention and treatment of RSV due to its antagonistic activity against the innate immune system. However, NS2-deleted RSV vaccine candidates rendered RSV overattenuated or poorly immunogenic. Alternatively, we can modify essential NS2 structural features to marginally limit viral growth while maintaining immune responses, providing the necessary balance between

16. Electrode–electrolyte interface stability in solid state electrolyte systems: influence of coating thickness under varying residual stresses

Directory of Open Access Journals (Sweden)

Claas Hüter

2017-08-01

Full Text Available We introduce a model of electrode–electrolyte interfacial growth which focuses on theeffect of thin coating layers on the interfacial stability in prestressed systems. We take into accounttransport resulting from deposition from the electrolyte, from capillarity driven surface diffusion, andfrom changes of the chemical potential due to the elastic energy associated with the interface profile.As model system, we use metallic lithium as electrode, LLZO as electrolyte and Al2O3 as a thin filminterlayer, which is a highly relevant interfacial system in state of the art all-solid-electrolyte batteries.We consider the stability of the electrode-coating-electrolyte interface depending on the thickness ofthe thin film interlayer and the magnitude of the elastic prestresses. Our central approach is a linearstability analysis based on the mass conservation at the planar interface, employing approximationswhich are appropriate for solid state electrolytes (SSEs like LLZ, a thin Li metal electrode and a thincoating layer with a thickness in the range of nanometres.

17. Eulerian numbers

CERN Document Server

Petersen, T Kyle

2015-01-01

This text presents the Eulerian numbers in the context of modern enumerative, algebraic, and geometric combinatorics. The book first studies Eulerian numbers from a purely combinatorial point of view, then embarks on a tour of how these numbers arise in the study of hyperplane arrangements, polytopes, and simplicial complexes. Some topics include a thorough discussion of gamma-nonnegativity and real-rootedness for Eulerian polynomials, as well as the weak order and the shard intersection order of the symmetric group. The book also includes a parallel story of Catalan combinatorics, wherein the Eulerian numbers are replaced with Narayana numbers. Again there is a progression from combinatorics to geometry, including discussion of the associahedron and the lattice of noncrossing partitions. The final chapters discuss how both the Eulerian and Narayana numbers have analogues in any finite Coxeter group, with many of the same enumerative and geometric properties. There are four supplemental chapters throughout, ...

18. Contribution of the study of a nuclear reactor accident: residual power aspects and thermodynamic of U-UO2 and UO2-ZrO2 systems

International Nuclear Information System (INIS)

Baichi, Mehdi

2001-01-01

This work is a contribution to the study of early delocalization and fission product releases during the formation of corium coming from a nuclear reactor accident. The first part deals with an analysis of corium cooling. The contribution to the power of each corium element has been calculated with time. The main elements are represented but the addition of Pu, Mo and Nb has been proposed. The last release experimental data taken into account result in a loss of residual power of 25% exclusive of corium between the emergency stop and ten days. The second part deals with the early delocalization observed during Vercors experiments. A critical selection on the U-UO 2 and UO 2 -ZrO 2 systems has been carried out. In order to complete the small and inconsistent data, thermodynamic activity measurements have been performed by mass spectrometry. The UO 2 activity on UO 2 -ZrO 2 presents a positive deviation from ideality at 2200 K and approximates ideality at 2400 K. All the data have been used for optimizing the systems with Thermo-Calc. This work has allowed to calculate the ternary systems and to define the required approach to analyze the metallic phase and corium oxides densities. (author) [fr

19. Comparison of long-term stability of containment systems for residues and wastes contaminated with naturally occurring radionuclides at an arid site and two humid sites

International Nuclear Information System (INIS)

Winters, M.; Merry-Libby, P.; Hinchman, R.

1985-01-01

The long-term stability of near-surface containment systems designed for the management of radioactive wastes and residues contaminated with naturally occurring radionuclides are compared at the three different sites. The containment designs are: (1) a diked 8.9-m high mound, including a 3.2-m layered cap at a site (humid) near Lewiston, New York, (2) a 6.8-m-high mound, including a similar 3.2-m cap at a site (humid) near Oak Ridge, Tennessee, and (3) 4.8-m deep trenches with 3.0-m backfilled caps at a site (arid) near Hanford, Washington. Geological, hydrological, and biological factors affecting the long-term (1000-year) integrity of the containment systems at each site are examined, including: erosion, flooding, drought, wildfire, slope and cover failure, plant root penetration, burrowing animals, other soil-forming processes, and land-use changes. For the containment designs evaluated, releases of radon-222 at the arid site are predicted to be several orders of magnitude higher than at the two humid sites - upon initial burial and at 1000 years (after severe erosion). Transfer of wastes containing naturally occurring radionuclides from a humid to an arid environment offers little or no advantage relative to long-term stability of the containment system and has a definite disadvantage in terms of gaseous radioactive releases. 26 references, 3 figures, 4 tables

20. Machine Arithmetic in Residual Classes,

Science.gov (United States)

1981-04-03

rsmainder/residue, as this ascape /-nsues from thp determination of system. It can be. zaalizpd ;n the presence of th- arithmetic urit, which wor~s in thz sys...modules Nj. Page 417. Proof. Proof ascaps /ensues directly from the theorem of Gauss. Actually/really, since according to condition (py, qj)-=-. then

1. Improved catalyst materials and emission control systems. CRADA final report for CRADA Number ORNL 92-0115

Energy Technology Data Exchange (ETDEWEB)

Kenik, E.A.; More, K.L.; Domingo, N.; Storey, J.M. [Oak Ridge National Lab., TN (United States); LaBarge, W.; Beckmeyer, R.F.; Theis, J.R. [Delphi Automotive Systems, Flint, MI (United States)

1996-09-01

The overall goal of this CRADA was the improvement of performance and/or development of alternate systems for conventional fuel, flex-fuel, and alternate fuel vehicles in order to meet stringent future emission standards. The objectives had three major thrusts: (1) the characterization of the structural and chemical evolution of the precious metals and washcoat during aging under bench flow reactor, engine dynamometer, and vehicle conditions; (2) the correlation of measured catalyst performance and degradation over time with details of microstructural changes under bench flow reactor and engine dynamometer conditions; and (3) the simulation and testing of an in-cylinder catalyst system to determine the effect on emissions of a single-cylinder engine. Catalyst formulations for both gasoline and natural gas applications were studied. The emission testing and structural characterization were performed on alternate formulations and processing variables in order to evaluate the relative conversion efficiency, lifetime, and stability. The aging parameters were correlated with the evolving structure and properties of the tested catalytic converters. A major portion of the second thrust area was the construction and validation of both the bench flow reactor and engine dynamometer test facility and the identification of deactivation/regeneration mechanisms associated with alternative fuels relative to those for conventional fuel. A number of microstructural changes were identified that could contribute to the deactivation of the catalyst during aging. The stability of several catalyst formulations and alternate processing procedures relative to these microstructural changes and changes in conversion efficiency and lifetime were studied.

2. Study of the Atucha I nuclear power plant's residual heat removal system unavailability through the fault tree analysis and common cause failures

International Nuclear Information System (INIS)

1991-06-01

The present essay offers a comprehensive research of the Atucha I nuclear power plant's residual heat removal system unavailability, including Fault Tree Analysis and Common Cause Failures (CCF) treatment. The study is developed within the Event Tree perspective that considers the loss of external electrical power of the initiating event. The event was constructed by the Safety Evaluations Division of the Ezeiza Atomic Center in Argentina. According to the Event Tree, the research includes system demand during plant operation with 132 KV and emergency generation (Diesel motor generators). The system unavailability assessment is approached in two different ways: a) Considering independent failures only. b) Taking into account the existence of Common Cause Events, and modeling dependent failures. The Fault Tree quantification is played using the AIEA PSAPACK Code. The assessment data base is compiled from plant specific records and generic data bases like TECDOC 478. After Fault Tree model logic development, some general procedures used in common cause failures treating are applied to pick up another set of solutions. The results of the study are: a) Four Fault Trees have been developed to model the abovementioned system: 132 KV and emergency generation, both including and excluding CCF. b) The following unavailability values were obtained: 132 KV independent failures only: 7 10 -4 . Emergency generation independent failures only: 1.53 10 -2 . 132 KV dependent and independent failures: 3.6 10 -3 . Emergency generation dependent and independent failures: 1.74 10 -2 . The major conclusions obtained from the precedent results are: a) When using 132 KV system configuration, minimal cut sets involving common cause failures represents 81%from total system unavailability. b) The dependent failures treatment is an important task to be considered in safety assessments in order to reach more realistic values. (Author) [es

3. Crop residues and agro-industrial by-products used in traditional ...

African Journals Online (AJOL)

The crop residues were grouped under cereal crop residues (3), root crop residues (5), legume crop residues (3), and fruit crop residues (3). All the sampled respondents kept livestock and depend on the natural pasture as the main source of feed for their animals. The mean stock number per farmer in this study was 14.0 ...

4. Combinatorial construction of toric residues

OpenAIRE

Khetan, Amit; Soprounov, Ivan

2004-01-01

The toric residue is a map depending on n+1 semi-ample divisors on a complete toric variety of dimension n. It appears in a variety of contexts such as sparse polynomial systems, mirror symmetry, and GKZ hypergeometric functions. In this paper we investigate the problem of finding an explicit element whose toric residue is equal to one. Such an element is shown to exist if and only if the associated polytopes are essential. We reduce the problem to finding a collection of partitions of the la...

5. The effects of composting on the nutritional composition of fibrous bio-regenerative life support systems (BLSS) plant waste residues and its impact on the growth of Nile tilapia ( Oreochromis niloticus)

Science.gov (United States)

Gonzales, John M.; Lowry, Brett A.; Brown, Paul B.; Beyl, Caula A.; Nyochemberg, Leopold

2009-04-01

Utilization of bio-regenerative life support systems (BLSS) plant waste residues as a nutritional source by Nile tilapia ( Oreochromis niloticus) has proven problematic as a result of high concentrations of fibrous compounds in the plant waste residues. Nutritional improvement of plant waste residues by composting with the oyster mushroom ( Pleurotus ostreatus), and the effects on growth and nutrient utilization of Nile tilapia fed such residues were evaluated. Five Nile tilapia (mean weight = 70.9 ± 3.1 g) were stocked in triplicate aquaria and fed one of two experimental diets, cowpea (CP) and composted cowpea (CCP), twice daily for a period of 8 weeks. Composting of cowpea residue resulted in reduced concentrations of nitrogen-free extract, hemi-cellulose and trypsin inhibitor activity, though trypsin inhibitor activity remained high. Composting did not reduce crude fiber, lignin, or cellulose concentrations in the diet. No significant differences ( P tilapia fed CP and CCP. These results suggest that P. ostreatus is not a suitable candidate for culture in conjunction with the culture of Nile tilapia. Additional work is needed to determine what, if any, benefit can be obtained from incorporating composted residue as feed for Nile tilapia.

6. Risk-Based Approach to Developing National Residue Sampling Plan

OpenAIRE

Scientific Committee of the Food Safety Authority of Ireland

2014-01-01

A ranking system for veterinary medicinal products and medicated feed additives has been developed as a tool to be applied in a risk-based approach to the residue testing programme for foods of animal origin in the National Residue Control Plan. In the context of food sampling and residue testing for the National Residue Control Plan, there is firstly, the risk to human health from residues of chemical substances in food and secondly, the issue of non-compliance with regulations relating ...

7. Transfinite Numbers

Transfinite Numbers. What is Infinity? S M Srivastava. In a series of revolutionary articles written during the last quarter of the nineteenth century, the great Ger- man mathematician Georg Cantor removed the age-old mistrust of infinity and created an exceptionally beau- tiful and useful theory of transfinite numbers. This is.

8. Usefulness of ultrasound elastography in reducing the number of Breast Imaging Reporting and Data System category 3 lesions on ultrasonography

Energy Technology Data Exchange (ETDEWEB)

Cho, Nariya; Lim, Ji He; Moon, Woo Kyung [Dept. of Radiology, Seoul National University Hospital, Seoul National University College of Medicine, Seoul (Korea, Republic of)

2014-04-15

9. Usefulness of ultrasound elastography in reducing the number of Breast Imaging Reporting and Data System category 3 lesions on ultrasonography

Science.gov (United States)

2014-01-01

10. A critical analysis of computational protein design with sparse residue interaction graphs.

Science.gov (United States)

Jain, Swati; Jou, Jonathan D; Georgiev, Ivelin S; Donald, Bruce R

2017-03-01

Protein design algorithms enumerate a combinatorial number of candidate structures to compute the Global Minimum Energy Conformation (GMEC). To efficiently find the GMEC, protein design algorithms must methodically reduce the conformational search space. By applying distance and energy cutoffs, the protein system to be designed can thus be represented using a sparse residue interaction graph, where the number of interacting residue pairs is less than all pairs of mutable residues, and the corresponding GMEC is called the sparse GMEC. However, ignoring some pairwise residue interactions can lead to a change in the energy, conformation, or sequence of the sparse GMEC vs. the original or the full GMEC. Despite the widespread use of sparse residue interaction graphs in protein design, the above mentioned effects of their use have not been previously analyzed. To analyze the costs and benefits of designing with sparse residue interaction graphs, we computed the GMECs for 136 different protein design problems both with and without distance and energy cutoffs, and compared their energies, conformations, and sequences. Our analysis shows that the differences between the GMECs depend critically on whether or not the design includes core, boundary, or surface residues. Moreover, neglecting long-range interactions can alter local interactions and introduce large sequence differences, both of which can result in significant structural and functional changes. Designs on proteins with experimentally measured thermostability show it is beneficial to compute both the full and the sparse GMEC accurately and efficiently. To this end, we show that a provable, ensemble-based algorithm can efficiently compute both GMECs by enumerating a small number of conformations, usually fewer than 1000. This provides a novel way to combine sparse residue interaction graphs with provable, ensemble-based algorithms to reap the benefits of sparse residue interaction graphs while avoiding their

11. Influence of liming on residual soil respiration and chemical properties in a tropical no-tillage system

Directory of Open Access Journals (Sweden)

2012-02-01

Full Text Available Because of the climate changes occurring across the planet, especially global warming, the different forms of agricultural soil use have attracted researchers´ attention. Changes in soil management may influence soil respiration and, consequently, C sequestration. The objectives of this study were to evaluate the long-term influence of liming on soil respiration and correlate it with soil chemical properties after two years of liming in a no-tillage system. A randomized complete block design was used with six replications. The experimental treatments consisted of four lime rates and a control treatment without lime. Two years after liming, soil CO2 emission was measured and the soil sampled (layers 0-5, 5-10, 10-20, and 20-30 cm. The P, Ca2+ e Mg2+ soil contents and pH and base saturation were determined. CO2 emission from soil limed at the recommended rate was 24.1 % higher, and at twice the recommended rate, 47.4 % higher than from unlimed soil. Liming improved the chemical properties, and the linear increase in soil respiration rate correlated positively with the P, Ca2+ and Mg2+ soil contents, pH and base saturation, and negatively with H + Al and Al3+ contents. The correlation coefficient between soil respiration rate and chemical properties was highest in the 10-20 cm layer.

12. Establishment of a novel immunoassay system for rapid detection of 2,4-dichlorophenoxyacetic acid residues based on magnetic-fluorescent probes

Directory of Open Access Journals (Sweden)

WANG Yuanfeng

2014-12-01

Full Text Available A novel immunoassay system based on magnetic-fluorescent probes was established to detect 2.4-dichlorophenoxyacetic acid (2,4-D residue in liquid system in food and agricultural products.The composites of anti-2,4-D antibody bound to Fe3O4@SiO2-NH2 was employed as the solid phase as well as magnetic probe.The composites composed of 2,4-D-OVA labeled with CdTe@SiO2-NH2 as the fluorescent probe was used to produce fluorescent signal.2,4-D and its fluorescent probe competed binding the antibody on the surface of the magnetic probe.The optimization of 2,4-D-OVA dosage,coupling PH and reaction time in preparing the fluorescent probe were investigated.It showed that in the synthesis of fluorescent probe 8.2 was the optimal pH,70 min was the optimal coupling time,500 μL amount of 2,4-D-OVA.The standard curve was obtained with the concentration of 2,4-D and the maximum fluorescence intensity.The detection limit of the assay was gotten and it was 3.55×10-8.One reaction step and one washing step were needed.The assay significantly shortened the testing time and amplified the detection signal compared with classic ELISA.

13. Effect of immune system stimulation and divergent selection for residual feed intake on digestive capacity of the small intestine in growing pigs.

Science.gov (United States)

Rakhshandeh, A; Dekkers, J C M; Kerr, B J; Weber, T E; English, J; Gabler, N K

2012-12-01

Little is known of the consequences of divergent selection for residual feed intake (RFI) on intestinal digestion capacity, particularly during immune system stimulation (ISS). Our objective was to evaluate the impact of ISS and divergent selection for RFI on apparent ileal digestibility (AID) and apparent fecal digestibility (AFD) of nutrients and intestinal nutrient active transport and barrier function. Twenty-eight gilts (63 ± 4 kg BW) from low RFI (LRFI; n = 14) and high RFI (HRFI; n = 14) Yorkshire lines were randomly selected from the Iowa State University RFI herd. Following adaptation, 8 pigs in each line were injected intramuscularly and every 48 h for 7 d with increasing amounts of Escherichia coli lipopolysaccharide (ISS+). Remaining pigs were injected with saline (ISS-). Pigs were then euthanized and ileal digesta was collected for measuring AID of nutrients. Fecal samples were collected on a daily basis and pooled for measuring AFD of nutrients. A segment of ileum was used to measure nutrient transport and transepithelial resistance (TER) and/or barrier integrity by Ussing chambers. No effects of line or its interaction with ISS on AID of CP (N × 6.25) and OM, TER, and active nutrients transport were observed. However, ISS decreased (P digestive capacity of growing pigs during ISS. Immune system stimulation affects both AID and AFD of dietary CP.

14. Sediment transport patterns in the San Francisco Bay Coastal System from cross-validation of bedform asymmetry and modeled residual flux

Science.gov (United States)

Barnard, Patrick L.; Erikson, Li H.; Elias, Edwin P.L.; Dartnell, Peter; Barnard, P.L.; Jaffee, B.E.; Schoellhamer, D.H.

2013-01-01

The morphology of ~ 45,000 bedforms from 13 multibeam bathymetry surveys was used as a proxy for identifying net bedload sediment transport directions and pathways throughout the San Francisco Bay estuary and adjacent outer coast. The spatially-averaged shape asymmetry of the bedforms reveals distinct pathways of ebb and flood transport. Additionally, the region-wide, ebb-oriented asymmetry of 5% suggests net seaward-directed transport within the estuarine-coastal system, with significant seaward asymmetry at the mouth of San Francisco Bay (11%), through the northern reaches of the Bay (7–8%), and among the largest bedforms (21% for λ > 50 m). This general indication for the net transport of sand to the open coast strongly suggests that anthropogenic removal of sediment from the estuary, particularly along clearly defined seaward transport pathways, will limit the supply of sand to chronically eroding, open-coast beaches. The bedform asymmetry measurements significantly agree (up to ~ 76%) with modeled annual residual transport directions derived from a hydrodynamically-calibrated numerical model, and the orientation of adjacent, flow-sculpted seafloor features such as mega-flute structures, providing a comprehensive validation of the technique. The methods described in this paper to determine well-defined, cross-validated sediment transport pathways can be applied to estuarine-coastal systems globally where bedforms are present. The results can inform and improve regional sediment management practices to more efficiently utilize often limited sediment resources and mitigate current and future sediment supply-related impacts.

15. Number theory

CERN Document Server

Andrews, George E

1994-01-01

Although mathematics majors are usually conversant with number theory by the time they have completed a course in abstract algebra, other undergraduates, especially those in education and the liberal arts, often need a more basic introduction to the topic.In this book the author solves the problem of maintaining the interest of students at both levels by offering a combinatorial approach to elementary number theory. In studying number theory from such a perspective, mathematics majors are spared repetition and provided with new insights, while other students benefit from the consequent simpl

16. Electrodialytic remediation of air pollution control residues

DEFF Research Database (Denmark)

Jensen, Pernille Erland

Air pollution control (APC) residue from municipal solid waste incineration (MSWI) consists of the fly ash, and, in dry and semi-dry systems, also the reaction products from the flue gas cleaning process. APC residue is considered a hazardous waste due to its high alkalinity, high content of salts...

17. Residuals Management and Water Pollution Control Planning.

Science.gov (United States)

Environmental Protection Agency, Washington, DC. Office of Public Affairs.

This pamphlet addresses the problems associated with residuals and water quality especially as it relates to the National Water Pollution Control Program. The types of residuals and appropriate management systems are discussed. Additionally, one section is devoted to the role of citizen participation in developing management programs. (CS)

18. Revised risk priority number in failure mode and effects analysis model from the perspective of healthcare system

Directory of Open Access Journals (Sweden)

Fatemeh Rezaei

2018-01-01

Full Text Available Background: Methodology of Failure Mode and Effects Analysis (FMEA is known as an important risk assessment tool and accreditation requirement by many organizations. For prioritizing failures, the index of “risk priority number (RPN” is used, especially for its ease and subjective evaluations of occurrence, the severity and the detectability of each failure. In this study, we have tried to apply FMEA model more compatible with health-care systems by redefining RPN index to be closer to reality. Methods: We used a quantitative and qualitative approach in this research. In the qualitative domain, focused groups discussion was used to collect data. A quantitative approach was used to calculate RPN score. Results: We have studied patient's journey in surgery ward from holding area to the operating room. The highest priority failures determined based on (1 defining inclusion criteria as severity of incident (clinical effect, claim consequence, waste of time and financial loss, occurrence of incident (time - unit occurrence and degree of exposure to risk and preventability (degree of preventability and defensive barriers then, (2 risks priority criteria quantified by using RPN index (361 for the highest rate failure. The ability of improved RPN scores reassessed by root cause analysis showed some variations. Conclusions: We concluded that standard criteria should be developed inconsistent with clinical linguistic and special scientific fields. Therefore, cooperation and partnership of technical and clinical groups are necessary to modify these models.

19. Nice numbers

CERN Document Server

Barnes, John

2016-01-01

In this intriguing book, John Barnes takes us on a journey through aspects of numbers much as he took us on a geometrical journey in Gems of Geometry. Similarly originating from a series of lectures for adult students at Reading and Oxford University, this book touches a variety of amusing and fascinating topics regarding numbers and their uses both ancient and modern. The author intrigues and challenges his audience with both fundamental number topics such as prime numbers and cryptography, and themes of daily needs and pleasures such as counting one's assets, keeping track of time, and enjoying music. Puzzles and exercises at the end of each lecture offer additional inspiration, and numerous illustrations accompany the reader. Furthermore, a number of appendices provides in-depth insights into diverse topics such as Pascal’s triangle, the Rubik cube, Mersenne’s curious keyboards, and many others. A theme running through is the thought of what is our favourite number. Written in an engaging and witty sty...

20. Método de número mais provável para avaliação de grupos fisiológicos de microrganismos em digestão anaeróbia de água residuária de mandioca / Most probable number method for microorganism physiologic group's evaluation in anaerobic digestion of cassava wastewater

Directory of Open Access Journals (Sweden)

Maria Magdalena Ferreira Ribas

2009-12-01

1. Probing organic residues on Martian regolith simulants using a long-wave infrared Laser-induced breakdown spectroscopy linear array detection system

Science.gov (United States)

Prasad, Narasimha S.; Yang, Clayton S.-C.; Jin, Feng; Jia, Ken; Brown, EiEi; Hömmerich, Uwe; Jia, Yingqing; Trivedi, Sudhir; Wijewarnasuriya, Priyalal; Decuir, Eric; Samuels, Alan C.

2016-09-01

Recently, a mercury-cadmium-telluride (MCT) linear array detection system that is capable of rapidly capturing ( 1-5 second) a broad spectrum of atomic and molecular laser-induced breakdown spectroscopy (LIBS) emissions in the longwave infrarμed region (LWIR, 5.6 to 10 μm) has been developed. Similar to the conventional Ultraviolet (UV)-Visible (Vis) LIBS, a broad band emission spectrum of condensed phase samples covering the entire 5.6 to 10 μm region can be acquired from just a single laser-induced micro-plasma or averaging a few single laser-induced micro-plasmas. This setup has enabled probing samples "as is" without the need for extensive sample preparation and also offers the possibility of a simultaneous UV-Vis and LWIR LIBS measurement. A Martian regolith simulant (JSC Mars-1A) was studied with this novel Vis + LWIR LIBS array system. A broad SiO2 vibrational emission feature around 9.5 μm and multiple strong emission features between 6.5 to 8 μm can be clearly identified. The 6.5 to 8 μm features are possibly from biological impurities of the simulant. JSC Mars-1A samples with organic methyl salicylate (MeS, wintergreen oil) and Dimethyl methyl-phosphonate (DMMP) residues were also probed using the LWIR LIBS array system. Both molecular spectral signature around 6.5 μm and 9.5 μm of Martian regolith simulant and MeS and DMMP molecular signature emissions, such as Aromatic CC stretching band at 7.5 μm, C-CH3O asymmetric deformation at 7.6 μm, and P=O stretching band at 7.9 μm, are clearly observed from the LIBS emission spectra in the LWIR region.

Energy Technology Data Exchange (ETDEWEB)

Hawthorne, S.B.; Timpe, R.C.; Hartman, J.H. [and others

1994-02-01

This report addresses three subtasks related to the Resource Characterization and Residuals Remediation program: (1) sulfur forms in coal and their thermal transformations, (2) data resource evaluation and integration using GIS (Geographic Information Systems), and (3) supplementary research related to the Rocky Mountain 1 (RM1) UCG (Underground Coal Gasification) test program.

3. Genome-wide association and systems genetic analyses of residual feed intake, daily feed consumption, backfat and weight gain in pigs

DEFF Research Database (Denmark)

Do, Duy Ngoc; Ostersen, Tage; Strathe, Anders Bjerring

2014-01-01

Feed efficiency is one of the major components determining costs of animal production. Residual feed intake (RFI) is defined as the difference between the observed and the expected feed intake given a certain production. Residual feed intake 1 (RFI1) was calculated based on regression of individual...... daily feed intake (DFI) on initial test weight and average daily gain. Residual feed intake 2 (RFI2) was as RFI1 except it was also regressed with respect to backfat (BF). It has been shown to be a sensitive and accurate measure for feed efficiency in livestock but knowledge of the genomic regions...

4. Funny Numbers

Directory of Open Access Journals (Sweden)

Theodore M. Porter

2012-12-01

Full Text Available The struggle over cure rate measures in nineteenth-century asylums provides an exemplary instance of how, when used for official assessments of institutions, these numbers become sites of contestation. The evasion of goals and corruption of measures tends to make these numbers “funny” in the sense of becoming dis-honest, while the mismatch between boring, technical appearances and cunning backstage manipulations supplies dark humor. The dangers are evident in recent efforts to decentralize the functions of governments and corporations using incen-tives based on quantified targets.

5. Residual stress measurement for injection molded components

Directory of Open Access Journals (Sweden)

2016-07-01

Full Text Available Residual stress induced during manufacturing of injection molded components such as polymethyl methacrylate (PMMA affects the mechanical and optical properties of these components. These residual stresses can be visualized and quantified by measuring their birefringence. In this paper, a low birefringence polariscope (LBP is used to measure the whole-field residual stress distribution of these injection molded specimens. Detailed analytical and experimental study is conducted to quantify the residual stress measurement in these materials. A commercial birefringence measurement system was used to validate the results obtained to our measurement system. This study can help in material diagnosis for quality and manufacturing purpose and be useful for understanding of residual stress in imaging or other applications.

6. Application of Computer Algebra Systems to the Construction of the Collocations and Least Residuals Method for Solving the 3D Navier–Stokes Equations

Directory of Open Access Journals (Sweden)

V. P. Shapeev

2014-01-01

Full Text Available The method of collocations and least residuals (CLR, which was proposed previously for the numerical solution of two-dimensional Navier–Stokes equations governing the stationary flows of a viscous incompressible fluid, is extended here for the three-dimensional case. The solution is sought in the implemented version of the method in the form of an expansion in the basis solenoidal functions. At all stages of the CLR method construction, a computer algebra system (CAS is applied for the derivation and verification of the formulas of the method and for their translation into arithmetic operators of the Fortran language. For accelerating the convergence of iterations a sufficiently universal algorithm is proposed, which is simple in its implementation and is based on the use of the Krylov’s subspaces. The obtained computational formulas of the CLR method were verified on the exact analytic solution of a test problem. Comparisons with the published numerical results of solving the benchmark problem of the 3D driven cubic cavity flow show that the accuracy of the results obtained by the CLR method corresponds to the known high-accuracy solutions.

7. Numerical Analysis of Loss of Residual Heal Removal System (RHRS) during Mid-Loop Operation for Hanul NPP Units 1 and 2

International Nuclear Information System (INIS)

Kim, Sook Kwan; Park, Seong Gyu; Han, Sang Koo

2016-01-01

As a part of supporting LPSD (Low Power and Shutdown) PSA (Probabilistic Safety Assessment) of Hanul NPP units 1 and 2, numerical analysis for a loss of RHRS (Residual Heat Removal system) during midloop operation was performed using RELAP5/MOD3.3 code. The one of main purpose of thermal hydraulic analysis for PSA work is to estimate times allowable for operation actions in each accident. A loss of RHRS during mid-loop operation may cause more significant results than during RCS full condition due to reduced RCS inventory. In order to perform this kind of analysis, it is particularly important to establish a steady state of mid-loop operational initial condition. Mid-loop operation corresponds to POS(Plant Operational State) 5 and 11 in the category of LPSD PSA at Hanul NPP units 1 and 2. RELAP5/MOD3.3 code was used to predict behaviors of RCS and fuels for the case of loss of RHRS during mid-loop operation at Hanul NPP units 1 and 2. The initial state of mid-loop operational condition was established by proper control of charging and letdown flow. Considering existing similar analysis results for this kind of accident, it can be concluded that RELAP5 code well predicts reasonably the behavior of RCS for loss of RHRS during mid-loop operation in Hanul NPP units 1 and 2. Thus the method developed in the analysis can be applied reasonably to support LPSD PSA

8. Agricultural pesticide residues

International Nuclear Information System (INIS)

Fuehr, F.

1984-01-01

The utilization of tracer techniques in the study of agricultural pesticide residues is reviewed under the following headings: lysimeter experiments, micro-ecosystems, translocation in soil, degradation of pesticides in soil, biological availability of soil-applied substances, bound residues in the soil, use of macro- and microautography, double and triple labelling, use of tracer labelling in animal experiments. (U.K.)

9. Transfinite Numbers

this is a characteristic difference between finite and infinite sets and created an immensely useful branch of mathematics based on this idea which had a great impact on the whole of mathe- matics. For example, the question of what is a number (finite or infinite) is almost a philosophical one. However Cantor's work turned it ...

10. Transfinite Numbers

Home; Journals; Resonance – Journal of Science Education; Volume 2; Issue 3. Transfinite Numbers - What is Infinity? S M Srivastava. General Article Volume 2 Issue 3 March 1997 pp 58-68. Fulltext. Click here to view fulltext PDF. Permanent link: https://www.ias.ac.in/article/fulltext/reso/002/03/0058-0068 ...

11. The Cauchy method of residues

CERN Document Server

Mitrinović, Dragoslav S

1993-01-01

Volume 1, i. e. the monograph The Cauchy Method of Residues - Theory and Applications published by D. Reidel Publishing Company in 1984 is the only book that covers all known applications of the calculus of residues. They range from the theory of equations, theory of numbers, matrix analysis, evaluation of real definite integrals, summation of finite and infinite series, expansions of functions into infinite series and products, ordinary and partial differential equations, mathematical and theoretical physics, to the calculus of finite differences and difference equations. The appearance of Volume 1 was acknowledged by the mathematical community. Favourable reviews and many private communications encouraged the authors to continue their work, the result being the present book, Volume 2, a sequel to Volume 1. We mention that Volume 1 is a revised, extended and updated translation of the book Cauchyjev raeun ostataka sa primenama published in Serbian by Nau~na knjiga, Belgrade in 1978, whereas the greater part ...

12. A new model for Assessment and Optimization of Number of Spare Transformers and their Locations in Distribution Systems

Directory of Open Access Journals (Sweden)

M Sedaghati

2015-12-01

Full Text Available In this paper, a new model has been presented to determine the number of spare transformers and their locations for distribution stations. The number of spare transformers must be so that they need minimum investment. Furthermore, they must be sufficient for replacing with transformers that have been damaged. For this reason, in this paper a new purpose function has been presented to maximize profit in distribution company’s budgeting and planning. For determining the number of spares that must be available in a stock room, this paper considers the number of spares and transformer’s fault at the same time. The number of spare transformers is determined so that at least one spare transformer will be available for replacing with the failed transformers. This paper considers time required for purchasing or repairing a failed transformer to determine the number of required spare transformers. Furthermore, whatever the number of spare equipment are increased, cost of maintenance will be increased, so an economic comparison must be done between reduced costs from reducing of outage time and increased costs from spare transformers existence.

13. Tracing N, K, Mg and Ca released from decomposing biomass to new tree growth. Part I: A model system simulating harvest residue decomposition on conventionally harvested clearfell sites

Energy Technology Data Exchange (ETDEWEB)

Weatherall, A. [Macaulay Institute, Craigiebuckler, Aberdeen AB15 8QH (United Kingdom)]. E-mail: aweatherall@uclan.ac.uk; Proe, M.F. [Macaulay Institute, Craigiebuckler, Aberdeen AB15 8QH (United Kingdom); Craig, J. [Macaulay Institute, Craigiebuckler, Aberdeen AB15 8QH (United Kingdom); Cameron, A.D. [School of Biological Sciences, University of Aberdeen, Cruickshank Building, St. Machar Drive AB24 3UU (United Kingdom); McKay, H.M. [Policy and Practice Division, Forestry Commission, 231 Corstorphine Road, Edinburgh EH12 7AT (United Kingdom); Midwood, A.J. [Macaulay Institute, Craigiebuckler, Aberdeen AB15 8QH (United Kingdom)

2006-12-15

It is necessary to assess the effects of removing nutrient-rich harvest residues (brash) from clearfell sites because there is a growing market for this brash as bioenergy. The aim of this study was to use stable isotope techniques in a model system to trace nutrients released by decomposing brash. Labelled biomass was obtained by growing Sitka spruce (Picea sitchensis (Bong.) Carr.) seedlings with a generous or poor nutrient supply containing elevated {sup 15}N, {sup 41}K, {sup 26}Mg, and {sup 44}Ca. This biomass was used in two subsequent studies. In this study (Part I of II), the above-ground biomass was harvested and placed on soil in a pot containing a newly planted seedling. Soils from two forests, Ae and Teindland, of contrasting nutritional status were used. A full destructive harvest was undertaken after one growing season. Enriched {sup 15}N, {sup 41}K, {sup 26}Mg, and {sup 44}Ca were recovered in the new seedlings. The percentage contribution from labelled biomass to new tree growth was small, but discernible. The N contribution from labelled biomass to new trees was greater in Ae soil, but the base cation contribution was greater in Teindland soil. Results are discussed with reference to the initial nutrient concentrations of each soil. The elevated {sup 15}N, {sup 41}K, {sup 26}Mg and {sup 44}Ca in new seedlings indicate that nutrients in brash can make a direct contribution to new tree growth. The success of this model system will provide guidance for the application of similar techniques in field experiments.

14. Comparing the life cycle costs of using harvest residue as feedstock for small- and large-scale bioenergy systems (part II)

International Nuclear Information System (INIS)

Cleary, Julian; Wolf, Derek P.; Caspersen, John P.

2015-01-01

In part II of our two-part study, we estimate the nominal electricity generation and GHG (greenhouse gas) mitigation costs of using harvest residue from a hardwood forest in Ontario, Canada to fuel (1) a small-scale (250 kW e ) combined heat and power wood chip gasification unit and (2) a large-scale (211 MW e ) coal-fired generating station retrofitted to combust wood pellets. Under favorable operational and regulatory conditions, generation costs are similar: 14.1 and 14.9 cents per kWh (c/kWh) for the small- and large-scale facilities, respectively. However, GHG mitigation costs are considerably higher for the large-scale system: $159/tonne of CO 2 eq., compared to$111 for the small-scale counterpart. Generation costs increase substantially under existing conditions, reaching: (1) 25.5 c/kWh for the small-scale system, due to a regulation mandating the continual presence of an operating engineer; and (2) 22.5 c/kWh for the large-scale system due to insufficient biomass supply, which reduces plant capacity factor from 34% to 8%. Limited inflation adjustment (50%) of feed-in tariff rates boosts these costs by 7% to 11%. Results indicate that policy generalizations based on scale require careful consideration of the range of operational/regulatory conditions in the jurisdiction of interest. Further, if GHG mitigation is prioritized, small-scale systems may be more cost-effective. - Highlights: • Generation costs for two forest bioenergy systems of different scales are estimated. • Nominal electricity costs are 14.1–28.3 cents/kWh for the small-scale plant. • Nominal electricity costs are 14.9–24.2 cents/kWh for the large-scale plant. • GHG mitigation costs from displacing coal and LPG are $111-$281/tonne of CO 2 eq. • High sensitivity to cap. factor (large-scale) and labor requirements (small-scale)

15. Pesticide Residues and Bees – A Risk Assessment

Science.gov (United States)

Sanchez-Bayo, Francisco; Goka, Koichi

2014-01-01

Bees are essential pollinators of many plants in natural ecosystems and agricultural crops alike. In recent years the decline and disappearance of bee species in the wild and the collapse of honey bee colonies have concerned ecologists and apiculturalists, who search for causes and solutions to this problem. Whilst biological factors such as viral diseases, mite and parasite infections are undoubtedly involved, it is also evident that pesticides applied to agricultural crops have a negative impact on bees. Most risk assessments have focused on direct acute exposure of bees to agrochemicals from spray drift. However, the large number of pesticide residues found in pollen and honey demand a thorough evaluation of all residual compounds so as to identify those of highest risk to bees. Using data from recent residue surveys and toxicity of pesticides to honey and bumble bees, a comprehensive evaluation of risks under current exposure conditions is presented here. Standard risk assessments are complemented with new approaches that take into account time-cumulative effects over time, especially with dietary exposures. Whilst overall risks appear to be low, our analysis indicates that residues of pyrethroid and neonicotinoid insecticides pose the highest risk by contact exposure of bees with contaminated pollen. However, the synergism of ergosterol inhibiting fungicides with those two classes of insecticides results in much higher risks in spite of the low prevalence of their combined residues. Risks by ingestion of contaminated pollen and honey are of some concern for systemic insecticides, particularly imidacloprid and thiamethoxam, chlorpyrifos and the mixtures of cyhalothrin and ergosterol inhibiting fungicides. More attention should be paid to specific residue mixtures that may result in synergistic toxicity to bees. PMID:24718419

16. Pesticide residues and bees--a risk assessment.

Directory of Open Access Journals (Sweden)

Francisco Sanchez-Bayo

Full Text Available Bees are essential pollinators of many plants in natural ecosystems and agricultural crops alike. In recent years the decline and disappearance of bee species in the wild and the collapse of honey bee colonies have concerned ecologists and apiculturalists, who search for causes and solutions to this problem. Whilst biological factors such as viral diseases, mite and parasite infections are undoubtedly involved, it is also evident that pesticides applied to agricultural crops have a negative impact on bees. Most risk assessments have focused on direct acute exposure of bees to agrochemicals from spray drift. However, the large number of pesticide residues found in pollen and honey demand a thorough evaluation of all residual compounds so as to identify those of highest risk to bees. Using data from recent residue surveys and toxicity of pesticides to honey and bumble bees, a comprehensive evaluation of risks under current exposure conditions is presented here. Standard risk assessments are complemented with new approaches that take into account time-cumulative effects over time, especially with dietary exposures. Whilst overall risks appear to be low, our analysis indicates that residues of pyrethroid and neonicotinoid insecticides pose the highest risk by contact exposure of bees with contaminated pollen. However, the synergism of ergosterol inhibiting fungicides with those two classes of insecticides results in much higher risks in spite of the low prevalence of their combined residues. Risks by ingestion of contaminated pollen and honey are of some concern for systemic insecticides, particularly imidacloprid and thiamethoxam, chlorpyrifos and the mixtures of cyhalothrin and ergosterol inhibiting fungicides. More attention should be paid to specific residue mixtures that may result in synergistic toxicity to bees.

17. ERIC Abstracts: A Collection of ERIC Document Resumes on Systems Approaches in Education. ERIC Abstracts Series, Number Eight.

Science.gov (United States)

American Association of School Administrators, Washington, DC.

ERIC abstracts on systems approaches in education, announced in RIE through January 1970, are compiled. The key terms used in compiling this collection are "systems approach,""systems analysis,""critical path method," and "systems concepts." The following information is presented for each document: author, title, place of publication, publisher,…

18. Managing woodwaste: Yield from residue

Energy Technology Data Exchange (ETDEWEB)

Nielson, E. [LNS Services, Inc., North Vancouver, British Columbia (Canada); Rayner, S. [Pacific Waste Energy Inc., Burnaby, British Columbia (Canada)

1993-12-31

Historically, the majority of sawmill waste has been burned or buried for the sole purpose of disposal. In most jurisdictions, environmental legislation will prohibit, or render uneconomic, these practices. Many reports have been prepared to describe the forest industrys residue and its environmental effect; although these help those looking for industry-wide or regional solutions, such as electricity generation, they have limited value for the mill manager, who has the on-hands responsibility for generation and disposal of the waste. If the mill manager can evaluate waste streams and break them down into their usable components, he can find niche market solutions for portions of the plant residue and redirect waste to poor/no-return, rather than disposal-cost, end uses. In the modern mill, residue is collected at the individual machine centre by waste conveyors that combine and mix sawdust, shavings, bark, etc. and send the result to the hog-fuel pile. The mill waste system should be analyzed to determine the measures that can improve the quality of residues and determine the volumes of any particular category before the mixing, mentioned above, occurs. After this analysis, the mill may find a niche market for a portion of its woodwaste.

19. Use of an electronic activity detection system to characterize estrus activity in crossbred beef heifers differing in follicle number

Science.gov (United States)

Increased numbers of antral follicles have been associated with decreased calving day, increased fertility, increased serum estradiol concentrations, increased serum progesterone concentrations, and increased estrus behavior in cattle. In addition, cows with increased fertility have been shown to h...

20. Work Breakdown Structure and Plant/Equipment Designation System Numbering Scheme for the High Temperature Gas- Cooled Reactor (HTGR) Component Test Capability (CTC)

International Nuclear Information System (INIS)

Bryan, Jeffery D.

2009-01-01

This white paper investigates the potential integration of the CTC work breakdown structure numbering scheme with a plant/equipment numbering system (PNS), or alternatively referred to in industry as a reference designation system (RDS). Ideally, the goal of such integration would be a single, common referencing system for the life cycle of the CTC that supports all the various processes (e.g., information, execution, and control) that necessitate plant and equipment numbers be assigned. This white paper focuses on discovering the full scope of Idaho National Laboratory (INL) processes to which this goal might be applied as well as the factors likely to affect decisions about implementation. Later, a procedure for assigning these numbers will be developed using this white paper as a starting point and that reflects the resolved scope and outcome of associated decisions.

1. Handling of Solid Residues

International Nuclear Information System (INIS)

Medina Bermudez, Clara Ines

1999-01-01

The topic of solid residues is specifically of great interest and concern for the authorities, institutions and community that identify in them a true threat against the human health and the atmosphere in the related with the aesthetic deterioration of the urban centers and of the natural landscape; in the proliferation of vectorial transmitters of illnesses and the effect on the biodiversity. Inside the wide spectrum of topics that they keep relationship with the environmental protection, the inadequate handling of solid residues and residues dangerous squatter an important line in the definition of political and practical environmentally sustainable. The industrial development and the population's growth have originated a continuous increase in the production of solid residues; of equal it forms, their composition day after day is more heterogeneous. The base for the good handling includes the appropriate intervention of the different stages of an integral administration of residues, which include the separation in the source, the gathering, the handling, the use, treatment, final disposition and the institutional organization of the administration. The topic of the dangerous residues generates more expectation. These residues understand from those of pathogen type that are generated in the establishments of health that of hospital attention, until those of combustible, inflammable type, explosive, radio-active, volatile, corrosive, reagent or toxic, associated to numerous industrial processes, common in our countries in development

2. Experimental findings on thermal use of residues and biofuels in circulating fluidized bed combustion systems; Experimentelle Ergebnisse zur thermischen Nutzung von Rest- und Biobrennstoffen in zirkulierenden Wirbelschichtfeuerungen

Energy Technology Data Exchange (ETDEWEB)

Bernstein, W.; Brunne, T.; Girndt, H. [Technische Univ. Dresden (Germany); Albrecht, J. [Lurgi Lentjes Babcock, Frankfurt am Main (Germany); Youssef, M. [Minia Univ. (Egypt)

1996-12-31

The energy Engineering Institute of Dresden Technical University investigated the combustion and emission characteristics of a number of combustion systems, including a circulating fluidized bed system with a capacity of 0.3 MW{sub th}. Egypts sugar cane industry produces large volumes of bagasse. The conbustion and emission characteristics of this biofuel in a circulating fludized bed combustion systems were investigated in a joint research project of the University of Minia and Dresden Technical University. (orig.) [Deutsch] Am Institut fuer Energietechnik der TU Dresden wird das Verbrennungs- und Emissionsverhalten verschiedenster Brennstoffe in unterschiedlichen Feuerungssystemen untersucht. Neben anderen Pilotanlagen steht eine zirkulierende Wirbelschichtfeuerung (ZWFS) mit einer Leistung von 0.3 MW{sub th} zur Verfuegung. In der Zuckerrohrindustrie Aegyptens fallen grosse Mengen von Bagasse an. In einer gemeinsamen Forschungsarbeit zwischen der Universitaet Minia und der TU Dresden sollte das Verbrennungs- und Emissionsverhalten dieses Biobrennstoffes in einer ZWSF untersucht werden. (orig)

3. Classical theory of algebraic numbers

CERN Document Server

Ribenboim, Paulo

2001-01-01

Gauss created the theory of binary quadratic forms in "Disquisitiones Arithmeticae" and Kummer invented ideals and the theory of cyclotomic fields in his attempt to prove Fermat's Last Theorem These were the starting points for the theory of algebraic numbers, developed in the classical papers of Dedekind, Dirichlet, Eisenstein, Hermite and many others This theory, enriched with more recent contributions, is of basic importance in the study of diophantine equations and arithmetic algebraic geometry, including methods in cryptography This book has a clear and thorough exposition of the classical theory of algebraic numbers, and contains a large number of exercises as well as worked out numerical examples The Introduction is a recapitulation of results about principal ideal domains, unique factorization domains and commutative fields Part One is devoted to residue classes and quadratic residues In Part Two one finds the study of algebraic integers, ideals, units, class numbers, the theory of decomposition, iner...

4. Communication report regarding the incident on the residual heat removal system at the nuclear power plant of Civaux May 12, 1998

International Nuclear Information System (INIS)

1999-01-01

The RRA (Residual Heat Removal System) of unit I had a leak of 280 m 3 while the reactor was shutdown for a period of 5 days, for normal start up tests. The leak was caused by a crack in a weld on a pipe of 25 cm in diameter. The liquid was completely contained within the Reactor Building containment; absolutely nothing leaked outside of the Reactor Building. This incident was classified level 2 on the INES scale. The Communication Immediately following the Incident showed that the efforts towards transparency were rewarding. A few months after the incident, hindsight helps, we can say that the media management of the RRA incident on, May 12th was in the image of its technical management, that is to say well mastered, and outside of the incident itself close to perfect. Obviously, the work we did during crisis exercises reaped its rewards. What is missing to advance to the next level? Maybe a bit of psychology, to attempt to surmise what a leak of radioactive water could represent in the public's eyes as well as the Media's who ignore the 'safety culture' (back-up trains etc.) and who still have fresh in their memories the Chernobyl accident. The vital Experience Feedback we collected and that of the Nuclear Industry since it exists incident after incident, even if immeasurable progress has been made (Civaux is a good example) our technical culture remains a hinderence towards a good estimation of the emotional level that such an incident can cause. Otherwise said, we still have progress to make on measuring the impact of an incident, not on the technical consequences nor the seriousness, but on the psychological impact it may have on the public. Beyond the crisis, this incident also showed how essential it is to dare talking about incidents and Safety Culture before intervening. The intimate enemy of Nuclear Energy is above all the relative ignorance in which the population finds itself. We still have work to do

5. [Effects of nitrogen management on maize nitrogen utilization and residual nitrate nitrogen in soil under maize/soybean and maize/sweet potato relay strip intercropping systems].

Science.gov (United States)

Wang, Xiao-Chun; Yang, Wen-Yu; Deng, Xiao-Yan; Zhang, Qun; Yong, Tai-Wen; Liu, Wei-Guo; Yang, Feng; Mao, Shu-Ming

2014-10-01

A large amount of nitrogen (N) fertilizers poured into the fields severely pollute the environment. Reasonable application of N fertilizer has always been the research hotpot. The effects of N management on maize N utilization and residual nitrate N in soil under maize/soybean and maize/ sweet potato relay strip intercropping systems were reported in a field experiment in southwest China. It was found that maize N accumulation, N harvest index, N absorption efficiency, N contribution proportion after the anthesis stage in maize/soybean relay strip intercropping were increased by 6.1%, 5.4%, 4.3%, and 15.1% than under maize/sweet potato with an increase of 22.6% for maize yield after sustainable growing of maize/soybean intercropping system. Nitrate N accumulation in the 0-60 cm soil layer was 12.9% higher under maize/soybean intercropping than under maize/sweet potato intercropping. However, nitrate N concentration in the 60-120 cm soil layer when intercropped with soybean decreased by 10.3% than when intercropped with sweet potato, indicating a decrease of N leaching loss. Increasing of N application rate enhanced N accumulation of maize and decreased N use efficiency and significantly increased nitrate concentration in the soil profile except in the 60-100 cm soil layer, where no significant difference was observed with nitrogen application rate at 0 to 270 kg · hm(-2). Further application of N fertilizer significantly enhanced nitrate leaching loss. Postponing N application increased nitrate accumulation in the 60-100 cm soil layer. The results suggested that N application rates and ratio of base to top dressing had different influences on maize N concentration and nitrate N between maize/soybean and maize/sweet potato intercropping. Maize N concentration in the late growing stage, N harvest index and N use efficiency under maize/soybean intercropping increased (with N application rate at 180-270 kg · hm(-2) and ratio of base to top dressing = 3:2:5) and

6. Asymptotic numbers: Pt.1

International Nuclear Information System (INIS)

Todorov, T.D.

1980-01-01

The set of asymptotic numbers A as a system of generalized numbers including the system of real numbers R, as well as infinitely small (infinitesimals) and infinitely large numbers, is introduced. The detailed algebraic properties of A, which are unusual as compared with the known algebraic structures, are studied. It is proved that the set of asymptotic numbers A cannot be isomorphically embedded as a subspace in any group, ring or field, but some particular subsets of asymptotic numbers are shown to be groups, rings, and fields. The algebraic operation, additive and multiplicative forms, and the algebraic properties are constructed in an appropriate way. It is shown that the asymptotic numbers give rise to a new type of generalized functions quite analogous to the distributions of Schwartz allowing, however, the operation multiplication. A possible application of these functions to quantum theory is discussed

Science.gov (United States)

Fuchs-Buder, T; Schmartz, D

2017-06-01

Even small degrees of residual neuromuscular blockade, i. e. a train-of-four (TOF) ratio >0.6, may lead to clinically relevant consequences for the patient. Especially upper airway integrity and the ability to swallow may still be markedly impaired. Moreover, increasing evidence suggests that residual neuromuscular blockade may affect postoperative outcome of patients. The incidence of these small degrees of residual blockade is relatively high and may persist for more than 90 min after a single intubating dose of an intermediately acting neuromuscular blocking agent, such as rocuronium and atracurium. Both neuromuscular monitoring and pharmacological reversal are key elements for the prevention of postoperative residual blockade.

8. TENORM: Wastewater Treatment Residuals

Science.gov (United States)

Water and wastes which have been discharged into municipal sewers are treated at wastewater treatment plants. These may contain trace amounts of both man-made and naturally occurring radionuclides which can accumulate in the treatment plant and residuals.

9. Residuation in orthomodular lattices

Directory of Open Access Journals (Sweden)

Chajda Ivan

2017-04-01

Full Text Available We show that every idempotent weakly divisible residuated lattice satisfying the double negation law can be transformed into an orthomodular lattice. The converse holds if adjointness is replaced by conditional adjointness. Moreover, we show that every positive right residuated lattice satisfying the double negation law and two further simple identities can be converted into an orthomodular lattice. In this case, also the converse statement is true and the corresponence is nearly one-to-one.

10. Residual Liquefaction under Standing Waves

DEFF Research Database (Denmark)

Kirca, V.S. Ozgur; Sumer, B. Mutlu; Fredsøe, Jørgen

2012-01-01

This paper summarizes the results of an experimental study which deals with the residual liquefaction of seabed under standing waves. It is shown that the seabed liquefaction under standing waves, although qualitatively similar, exhibits features different from that caused by progressive waves....... The experimental results show that the buildup of pore-water pressure and the resulting liquefaction first starts at the nodal section and spreads towards the antinodal section. The number of waves to cause liquefaction at the nodal section appears to be equal to that experienced in progressive waves for the same...

11. Copy-number variation of housekeeping gene rpl13a in rat strains selected for nervous system excitability

Czech Academy of Sciences Publication Activity Database

Kalendar, R.; Belyayev, Alexander; Zachepilo, T.; Vaido, A.; Maidanyuk, D.; Schulman, A. H.; Dyuzhikova, N.

2017-01-01

Roč. 33, JUN 2017 (2017), s. 11-15 ISSN 0890-8508 Institutional support: RVO:67985939 Keywords : copy number variation (CNV) * quantitative real-time multicolor multiplex * PCR (qmPCR) Subject RIV: EB - Genetics ; Molecular Biology OBOR OECD: Cell biology Impact factor: 1.403, year: 2016

12. Characterization of Hospital Residuals

International Nuclear Information System (INIS)

Blanco Meza, A.; Bonilla Jimenez, S.

1997-01-01

The main objective of this investigation is the characterization of the solid residuals. A description of the handling of the liquid and gassy waste generated in hospitals is also given, identifying the source where they originate. To achieve the proposed objective the work was divided in three stages: The first one was the planning and the coordination with each hospital center, in this way, to determine the schedule of gathering of the waste can be possible. In the second stage a fieldwork was made; it consisted in gathering the quantitative and qualitative information of the general state of the handling of residuals. In the third and last stage, the information previously obtained was organized to express the results as the production rate per day by bed, generation of solid residuals for sampled services, type of solid residuals and density of the same ones. With the obtained results, approaches are settled down to either determine design parameters for final disposition whether for incineration, trituration, sanitary filler or recycling of some materials, and storage politics of the solid residuals that allow to determine the gathering frequency. The study concludes that it is necessary to improve the conditions of the residuals handling in some aspects, to provide the cleaning personnel of the equipment for gathering disposition and of security, minimum to carry out this work efficiently, and to maintain a control of all the dangerous waste, like sharp or polluted materials. In this way, an appreciable reduction is guaranteed in the impact on the atmosphere. (Author) [es

13. Speaking two languages with different number naming systems: What implications for magnitude judgments in bilinguals at different stages of language acquisition?

Science.gov (United States)

Van Rinsveld, Amandine; Schiltz, Christine; Landerl, Karin; Brunner, Martin; Ugen, Sonja

2016-08-01

Differences between languages in terms of number naming systems may lead to performance differences in number processing. The current study focused on differences concerning the order of decades and units in two-digit number words (i.e., unit-decade order in German but decade-unit order in French) and how they affect number magnitude judgments. Participants performed basic numerical tasks, namely two-digit number magnitude judgments, and we used the compatibility effect (Nuerk et al. in Cognition 82(1):B25-B33, 2001) as a hallmark of language influence on numbers. In the first part we aimed to understand the influence of language on compatibility effects in adults coming from German or French monolingual and German-French bilingual groups (Experiment 1). The second part examined how this language influence develops at different stages of language acquisition in individuals with increasing bilingual proficiency (Experiment 2). Language systematically influenced magnitude judgments such that: (a) The spoken language(s) modulated magnitude judgments presented as Arabic digits, and (b) bilinguals' progressive language mastery impacted magnitude judgments presented as number words. Taken together, the current results suggest that the order of decades and units in verbal numbers may qualitatively influence magnitude judgments in bilinguals and monolinguals, providing new insights into how number processing can be influenced by language(s).

14. Numbers, sequences and series

CERN Document Server

Hirst, Keith

1994-01-01

Number and geometry are the foundations upon which mathematics has been built over some 3000 years. This book is concerned with the logical foundations of number systems from integers to complex numbers. The author has chosen to develop the ideas by illustrating the techniques used throughout mathematics rather than using a self-contained logical treatise. The idea of proof has been emphasised, as has the illustration of concepts from a graphical, numerical and algebraic point of view. Having laid the foundations of the number system, the author has then turned to the analysis of infinite proc

15. Framing Early Childhood Development: Strategic Communications and Public Preferences. Building State Early Childhood Comprehensive Systems Series. Number 7

Science.gov (United States)

Gilliam, Franklin D., Jr.; Bales, Susan Nall

2004-01-01

Maternal and child health practitioners often approach systemic change in a very practical manner: fostering a collaborative vision, engaging critical stakeholders, working with policymakers on reform, and bringing the data and experience to inform the process. Systems are often maintained at a status quo due to deep, ingrained structures,…

16. Efficient particle filtering through residual nudging

KAUST Repository

Luo, Xiaodong

2013-05-15

We introduce an auxiliary technique, called residual nudging, to the particle filter to enhance its performance in cases where it performs poorly. The main idea of residual nudging is to monitor and, if necessary, adjust the residual norm of a state estimate in the observation space so that it does not exceed a pre-specified threshold. We suggest a rule to choose the pre-specified threshold, and construct a state estimate accordingly to achieve this objective. Numerical experiments suggest that introducing residual nudging to a particle filter may (substantially) improve its performance, in terms of filter accuracy and/or stability against divergence, especially when the particle filter is implemented with a relatively small number of particles. © 2013 Royal Meteorological Society.

17. A novel alignment repulsion algorithm for flocking of multi-agent systems based on the number of neighbours per agent

Science.gov (United States)

Kahani, R.; Sedigh, A. K.; Mahjani, M. Gh.

2015-12-01

In this paper, an energy-based control methodology is proposed to satisfy the Reynolds three rules in a flock of multiple agents. First, a control law is provided that is directly derived from the passivity theorem. In the next step, the Number of Neighbours Alignment/Repulsion algorithm is introduced for a flock of agents which loses the cohesion ability and uniformly joint connectivity condition. With this method, each agent tries to follow the agents which escape its neighbourhood by considering the velocity of escape time and number of neighbours. It is mathematically proved that the motion of multiple agents converges to a rigid and uncrowded flock if the group is jointly connected just for an instant. Moreover, the conditions for collision avoidance are guaranteed during the entire process. Finally, simulation results are presented to show the effectiveness of the proposed methodology.

18. Final safety evaluation report related to the certification of the System 80+ design: Docket Number 52-002. Supplement 1

International Nuclear Information System (INIS)

1997-05-01

This report supplements the final safety evaluation report (FSER) for the System 80+ standard design. The FSER was issued by the US Nuclear Regulatory Commission (NRC) staff as NUREG-1462 in August 1994 to document the NRC staff's review of the System 80+ design. The System 80+ design was submitted by Asea Brown Boveri-Combustion Engineering (ABB-CE), in accordance with the procedures of Subpart B to Part 52 of Title 10 of the Code of Federal Regulations. This supplement documents the NRC staff's review of the changes to the System 80+ design documentation since the issuance of the FSER. ABB-CE made these changes as a result of its review of the System 80+ design details. The NRC staff concludes that the changes to the System 80+ design documentation are acceptable, and that ABB-CE's application for design certification meets the requirements of Subpart B to 10 CFR Part 52 that are applicable and technically relevant to the System 80+ design

19. Residual micro-stress distributions in heat-pressed ceramic on zirconia and porcelain-fused to metal systems: Analysis by FIB-DIC ring-core method and correlation with fracture toughness.

Science.gov (United States)

Sebastiani, M; Massimi, F; Merlati, G; Bemporad, E

2015-11-01

The production of fixed partial dentures (FPDs) induces complex residual stress profiles, due to both the thermal expansion coefficient mismatch between the veneering ceramic and the framework and to the thermal gradients occurring during the final cooling. Detailed knowledge of residual stress distributions in the veneering ceramics is important to understand the interface phenomena with the framework and the consequences of the different firing systems. The first objective of this study was to analyse the residual stress distribution in heat-pressed ceramic on zirconia core with micrometer spatial resolution, with also a focus on the stress at the interface versus porcelain-fused-to-metal samples. The second purpose was to correlate the residual stress with the fracture toughness. The micron-scale focused ion beam (FIB) ring-core method was used to map the residual stress over the cross-sections of the veneering ceramics. The methodology is based on FIB micro-milling of annular trenches, combined with high-resolution in situ scanning electron microscope (SEM) imaging, a full field strain analysis by digital image correlation (DIC) and numerical models for residual stress calculation. Fracture toughness was evaluated by using high load Vickers indentation and hardness/modulus were measured by nanoindentation testing also across the interfaces. Both prosthetic systems showed a compressive stress at the ceramic surface on a micron-scale. The stress profile for porcelain fused to metal (PFM) showed a transition to tensile stress at the half of the layer, whilst the stress in proximity of the interface was more compressive in both the cases. Residual stress on a micron scale are higher in magnitude than the corresponding macro-scale values reported in the literature, due to the stress relaxation given, at larger scales, by micro-voids and cracks. The stress field was directly correlated with the indentation fracture toughness, which was higher in those areas where the

20. [Situation analysis and standard formulation of pesticide residues in traditional Chinese medicines].

Science.gov (United States)

Yang, Wan-Zhen; Kang, Chuan-Zhi; Ji, Rui-Feng; Zhou, L I; Wang, Sheng; Li, Zhen-Hao; Ma, Zhong-Hua; Guo, Lan-Ping

2017-06-01

Chinese Pharmacopoeia provides nine pesticide Maximum Residual Limits(MRLs) of traditional Chinese medicines(TCMs), The number of pesticides used in production are far more than those listed in pharmacopoeia. The lack of the standards make it's hard to reflect the real situation of pesticide residues in TCMs correctly. The paper is aimed to analyze the data of pesticide residues in TCMs from 7 089 items in 140 reports, and judging the exceedance rate of pesticides in TCMs using the MRLs of European pharmacopoeia，which is widely accepted in many countries. The results show that：①Pesticide residues in 18 kinds of TCMs are higher than MRLs，while in 137 kinds are below MRLs, such as Atractylodis Macrocephalae Rhizoma, Menthae Haplocalycis Herba and Fritillariae Thunbergii Bulbus. The average exceedance rate of all TCMs is 1.72%. The average exceedance rates of organochlorine, organophosphorus and pyrethroid are 2.26%, 1.51%, 0.37%，respectively. ②The average exceedance rate of pesticides is 2.00%, and the exceedance rate is more than 5%, accounting for 8.33%, the exceedance rate is between 1%-5%, accounting for 18.75%. the exceedance rate is between 0%-1%, accounting for 18.75%. The remaining 29 kinds of pesticides were not exceeded, accounting for 60.42%.Some reports like Greenpeace's organization exaggerated the pesticide residues in TCMs.But the pesticide residue question is still worthy of attention, so we proposed to amend the Chinese Pharmacopoeia pesticide residues standards, to increase the pesticide species of traditional Chinese medicine in production on the basis of retaining the existing types of pesticide residues, to strengthen the system research of pesticide residues in TCMs, providing a basis for making standard and promoting import and export trade in TCMs. Copyright© by the Chinese Pharmaceutical Association.