Sample records for residual switch cost
-
Whitson, Lisa R; Karayanidis, Frini; Fulham, Ross; Provost, Alexander; Michie, Patricia T; Heathcote, Andrew; Hsieh, Shulan
2014-01-01
In task-switching paradigms, performance is better when repeating the same task than when alternating between tasks (switch cost) and when repeating a task alone rather than intermixed with another task (mixing cost). These costs remain even after extensive practice and when task cues enable advanced preparation (residual costs). Moreover, residual reaction time mixing cost has been consistently shown to increase with age. Residual switch and mixing costs modulate the amplitude of the stimulus-locked P3b. This mixing effect is disproportionately larger in older adults who also prepare more for and respond more cautiously on these "mixed" repeat trials (Karayanidis et al., 2011). In this paper, we analyze stimulus-locked and response-locked P3 and lateralized readiness potentials to identify whether residual switch and mixing cost arise from the need to control interference at the level of stimulus processing or response processing. Residual mixing cost was associated with control of stimulus-level interference, whereas residual switch cost was also associated with a delay in response selection. In older adults, the disproportionate increase in mixing cost was associated with greater interference at the level of decision-response mapping and response programming for repeat trials in mixed-task blocks. These findings suggest that older adults strategically recruit greater proactive and reactive control to overcome increased susceptibility to post-stimulus interference. This interpretation is consistent with recruitment of compensatory strategies to compensate for reduced repetition benefit rather than an overall decline on cognitive flexibility.
-
Directory of Open Access Journals (Sweden)
Lisa Rebecca Whitson
2014-04-01
Full Text Available In task-switching paradigms, performance is better when repeating the same task than when alternating between tasks (switch cost and when repeating a task alone rather than intermixed with another task (mixing cost. These costs remain even after extensive practice and when task cues enable advanced preparation (residual costs. Moreover, residual RT mixing cost has been consistently shown to increase with age. Residual switch and mixing costs modulate the amplitude of the stimulus-locked P3b. This mixing effect is disproportionately larger in older adults who also prepare more for and respond more cautiously on these ‘mixed’ repeat trials (Karayanidis et al., 2011. In this study, we examine stimulus-locked and response-locked P3 and lateralized readiness potentials to identify whether residual switch and mixing cost arise from the need to control interference at the level of stimulus processing or response processing. Residual mixing cost was associated with control of stimulus-level interference, whereas residual switch cost was also associated with a delay in response selection. In older adults, the disproportionate increase in mixing cost was associated with greater interference at the level of decision-response mapping and response programming for repeat trials in mixed-task blocks. We argue that, together with evidence of greater proactive control and more cautious responding for these trials, these findings suggest that older adults strategically recruit greater proactive and reactive control to overcome increased susceptibility to post-stimulus interference. This interpretation is consistent with recruitment of compensatory strategies to compensate for reduced repetition benefit rather than an overall decline on cognitive flexibility.
-
Liu, Xiaomei; Li, Shengtao; Zhang, Kanjian
2017-08-01
In this paper, we solve an optimal control problem for a class of time-invariant switched stochastic systems with multi-switching times, where the objective is to minimise a cost functional with different costs defined on the states. In particular, we focus on problems in which a pre-specified sequence of active subsystems is given and the switching times are the only control variables. Based on the calculus of variation, we derive the gradient of the cost functional with respect to the switching times on an especially simple form, which can be directly used in gradient descent algorithms to locate the optimal switching instants. Finally, a numerical example is given, highlighting the validity of the proposed methodology.
-
Sequential Effects in Deduction: Cost of Inference Switch
Milan, Emilio G.; Moreno-Rios, Sergio; Espino, Orlando; Santamaria, Carlos; Gonzalez-Hernandez, Antonio
2010-01-01
The task-switch paradigm has helped psychologists gain insight into the processes involved in changing from one activity to another. The literature has yielded consistent results about switch cost reconfiguration (abrupt offset in regular task-switch vs. gradual reduction in random task-switch; endogenous and exogenous components of switch cost;…
-
Switch on the competition. Causes, consequences and policy implications of consumer switching costs
International Nuclear Information System (INIS)
Pomp, M.; Shestalova, V.; Rangel, L.
2005-09-01
The success or failure of reforms aimed at liberalising markets depends to an important degree on consumer behaviour. If consumers do not base their choices on differences in prices and quality, competition between firms may be weak and the benefits of liberalisation to consumers may be small. One possible reason why consumers may respond only weakly to differences in price and quality is high costs of switching to another firm. This report presents a framework for analysing markets with switching costs and applies the framework in two empirical case studies. The first case study analyses the residential energy market, the second focuses on the market for social health insurance. In both markets, there are indications that switching costs are substantial. The report discusses policy options for reducing switching costs and for alleviating the consequences of switching costs
-
Switch on the competition. Causes, consequences and policy implications of consumer switching costs
Energy Technology Data Exchange (ETDEWEB)
Pomp, M.; Shestalova, V.; Rangel, L.
2005-09-15
The success or failure of reforms aimed at liberalising markets depends to an important degree on consumer behaviour. If consumers do not base their choices on differences in prices and quality, competition between firms may be weak and the benefits of liberalisation to consumers may be small. One possible reason why consumers may respond only weakly to differences in price and quality is high costs of switching to another firm. This report presents a framework for analysing markets with switching costs and applies the framework in two empirical case studies. The first case study analyses the residential energy market, the second focuses on the market for social health insurance. In both markets, there are indications that switching costs are substantial. The report discusses policy options for reducing switching costs and for alleviating the consequences of switching costs.
-
Task switching costs in preschool children and adults.
Peng, Anna; Kirkham, Natasha Z; Mareschal, Denis
2018-08-01
Past research investigating cognitive flexibility has shown that preschool children make many perseverative errors in tasks that require switching between different sets of rules. However, this inflexibility might not necessarily hold with easier tasks. The current study investigated the developmental differences in cognitive flexibility using a task-switching procedure that compared reaction times and accuracy in 4- and 6-year-olds with those in adults. The experiment involved simple target detection tasks and was intentionally designed in a way that the stimulus and response conflicts were minimal together with a long preparation window. Global mixing costs (performance costs when multiple tasks are relevant in a context), and local switch costs (performance costs due to switching to an alternative task) are typically thought to engage endogenous control processes. If this is the case, we should observe developmental differences with both of these costs. Our results show, however, that when the accuracy was good, there were no age differences in cognitive flexibility (i.e., the ability to manage multiple tasks and to switch between tasks) between children and adults. Even though preschool children had slower reaction times and were less accurate, the mixing and switch costs associated with task switching were not reliably larger for preschool children. Preschool children did, however, show more commission errors and greater response repetition effects than adults, which may reflect differences in inhibitory control. Copyright © 2018 Elsevier Inc. All rights reserved.
-
Optoelectronic switch matrix as a look-up table for residue arithmetic.
Macdonald, R I
1987-10-01
The use of optoelectronic matrix switches to perform look-up table functions in residue arithmetic processors is proposed. In this application, switchable detector arrays give the advantage of a greatly reduced requirement for optical sources by comparison with previous optoelectronic residue processors.
-
Adaptability in IT Sourcing: The Impact of Switching Costs
Whitten, Dwayne
IT sourcing decisions are increasingly becoming more strategic than in the past. As this occurs, firms should maintain a strategy of adaptability in order to mitigate the risks inherently associated with sourcing. A major influence on the adaptability of a firm in the short- and long-term are the switching costs associated with moving an activity from one source to another. As switching costs increase, firms may be "locked in" to one source. Firms should therefore work to decrease the switching costs so that they are more able to move an activity from one source to another if the market changes or an outsourcing relationship sours. Three strategies are presented for lowering switching costs which will ultimately help increase adaptability.
-
Verifying different-modality properties for concepts produces switching costs.
Pecher, Diane; Zeelenberg, René; Barsalou, Lawrence W
2003-03-01
According to perceptual symbol systems, sensorimotor simulations underlie the representation of concepts. It follows that sensorimotor phenomena should arise in conceptual processing. Previous studies have shown that switching from one modality to another during perceptual processing incurs a processing cost. If perceptual simulation underlies conceptual processing, then verifying the properties of concepts should exhibit a switching cost as well. For example, verifying a property in the auditory modality (e.g., BLENDER-loud) should be slower after verifying a property in a different modality (e.g., CRANBERRIES-tart) than after verifying a property in the same modality (e.g., LEAVES-rustling). Only words were presented to subjects, and there were no instructions to use imagery. Nevertheless, switching modalities incurred a cost, analogous to the cost of switching modalities in perception. A second experiment showed that this effect was not due to associative priming between properties in the same modality. These results support the hypothesis that perceptual simulation underlies conceptual processing.
-
Task Uncertainty Can Account for Mixing and Switch Costs in Task-Switching
Rennie, Jaime L.
2015-01-01
Cognitive control is required in situations that involve uncertainty or change, such as when resolving conflict, selecting responses and switching tasks. Recently, it has been suggested that cognitive control can be conceptualised as a mechanism which prioritises goal-relevant information to deal with uncertainty. This hypothesis has been supported using a paradigm that requires conflict resolution. In this study, we examine whether cognitive control during task switching is also consistent with this notion. We used information theory to quantify the level of uncertainty in different trial types during a cued task-switching paradigm. We test the hypothesis that differences in uncertainty between task repeat and task switch trials can account for typical behavioural effects in task-switching. Increasing uncertainty was associated with less efficient performance (i.e., slower and less accurate), particularly on switch trials and trials that afford little opportunity for advance preparation. Interestingly, both mixing and switch costs were associated with a common episodic control process. These results support the notion that cognitive control may be conceptualised as an information processor that serves to resolve uncertainty in the environment. PMID:26107646
-
Theory and Evidence of Switching Costs in the Market for College Textbooks
McMahan, Chris
2013-01-01
This dissertation develops and estimates a model of switching costs in the market for college textbooks. First, in a theoretical setting, this paper characterizes the professor's adoption decision, which includes a trade-off between time and course quality. The professor faces a time cost when he switches textbooks. This switching cost leads…
-
Task uncertainty can account for mixing and switch costs in task-switching.
Directory of Open Access Journals (Sweden)
Patrick S Cooper
Full Text Available Cognitive control is required in situations that involve uncertainty or change, such as when resolving conflict, selecting responses and switching tasks. Recently, it has been suggested that cognitive control can be conceptualised as a mechanism which prioritises goal-relevant information to deal with uncertainty. This hypothesis has been supported using a paradigm that requires conflict resolution. In this study, we examine whether cognitive control during task switching is also consistent with this notion. We used information theory to quantify the level of uncertainty in different trial types during a cued task-switching paradigm. We test the hypothesis that differences in uncertainty between task repeat and task switch trials can account for typical behavioural effects in task-switching. Increasing uncertainty was associated with less efficient performance (i.e., slower and less accurate, particularly on switch trials and trials that afford little opportunity for advance preparation. Interestingly, both mixing and switch costs were associated with a common episodic control process. These results support the notion that cognitive control may be conceptualised as an information processor that serves to resolve uncertainty in the environment.
-
Switching benefits and costs in the Irish health insurance market: an analysis of consumer surveys.
Keegan, Conor; Teljeur, Conor; Turner, Brian; Thomas, Steve
2018-05-10
Relatively little analysis has taken place internationally on the consumer-reported benefits and costs to switching insurer in multi-payer health insurance markets. Ideally, consumers should be willing to switch out of consideration for price and quality and switching should be able to take place without incurring significant switching costs. Costs to switching come in many forms and understanding the nature of these costs is necessary if policy interventions to improve market competition are to be successful. This study utilises data from consumer surveys of the Irish health insurance market collected between 2009 and 2013 (N [Formula: see text] 1703) to examine consumer-reported benefits and costs to switching insurer. Probit regression models are specified to examine the relationship between consumer characteristics and reported switching costs, and switching behaviour, respectively. Overall evidence suggests that switchers in the Irish market mainly did so out of consideration for price. Transaction cost was the most common switching cost identified, reported by just under 1 in 7 non-switchers. Psychological switching costs may also be impacting behaviour. Moreover, high-risk individuals were more likely to experience switching costs and this was reflected in actual switching behaviour. A recent information campaign launched by the market regulator may prove beneficial in reducing perceived transaction costs in the market, however, a more focused campaign aimed at high-risk consumers may be necessary to reduce inequalities. Policy-makers should also consider the impact insurer behaviour may have on decision-making.
-
Mediasi dan Pengaruh Switching Cost terhadap Loyalitas Pelanggan
Directory of Open Access Journals (Sweden)
Rina Astini
2008-09-01
Full Text Available Article presents a measurement of the effects of satisfaction and trust in connection with customer loyalty, and a direct and indirect effects of switching cost on customer loyalty. Data were collected from 42 respondents coming from GSM customers. Data was analyzed by using path analysis methods. The study found that satisfaction did not necessarily affect customers’ loyalty. Relationship of customer satisfaction and trust was greatly influenced by perception of customers towards the cost of switching. Level of satisfaction and respondent loyalty average was 69.7% and the average value of customer loyalty was 78.73%. The research result indicates that trust and switching cost jointly influence customer loyalty. Trust is more important than customer satisfaction in influencing customer loyalty, where the trust contains belief towards a brand, which will produce a positive outcome both in the present and in the future. Customer satisfaction does not contain this dimension. It is concluded that GSM operators shall have to focus on trust rather than satisfaction.
-
Directory of Open Access Journals (Sweden)
Michael eReynolds
2016-01-01
Full Text Available One approach used to gain insight into the processes underlying bilingual language comprehension and production examines the costs that arise from switching languages. For unbalanced bilinguals, asymmetric switch costs are reported in speech production, where the switch cost for L1 is larger than the switch cost for L2, whereas, symmetric switch costs are reported in language comprehension tasks, where the cost of switching is the same for L1 and L2. Presently, it is unclear why asymmetric switch costs are observed in speech production, but not in language comprehension. Three experiments are reported that simultaneously examine methodological explanations of task related differences in the switch cost asymmetry and the predictions of three accounts of the switch cost asymmetry in speech production. The results of these experiments suggest that (1 the type of language task (comprehension vs. production determines whether an asymmetric switch cost is observed and (2 at least some of the switch cost asymmetry arises within the language system.
-
Incorrect predictions reduce switch costs.
Kleinsorge, Thomas; Scheil, Juliane
2015-07-01
In three experiments, we combined two sources of conflict within a modified task-switching procedure. The first source of conflict was the one inherent in any task switching situation, namely the conflict between a task set activated by the recent performance of another task and the task set needed to perform the actually relevant task. The second source of conflict was induced by requiring participants to guess aspects of the upcoming task (Exps. 1 & 2: task identity; Exp. 3: position of task precue). In case of an incorrect guess, a conflict accrues between the representation of the guessed task and the actually relevant task. In Experiments 1 and 2, incorrect guesses led to an overall increase of reaction times and error rates, but they reduced task switch costs compared to conditions in which participants predicted the correct task. In Experiment 3, incorrect guesses resulted in faster performance overall and to a selective decrease of reaction times in task switch trials when the cue-target interval was long. We interpret these findings in terms of an enhanced level of controlled processing induced by a combination of two sources of conflict converging upon the same target of cognitive control. Copyright © 2015 Elsevier B.V. All rights reserved.
-
Switching benefits and costs in the Irish health insurance market: an analysis of consumer surveys
KEEGAN, CONOR; Teljeur, Conor; Turner, Brian; THomas, Steve
2018-01-01
PUBLISHED Relatively little analysis has taken place internationally on the consumer-reported benefits and costs to switching insurer in multi-payer health insurance markets. Ideally, consumers should be willing to switch out of consideration for price and quality and switching should be able to take place without incurring significant switching costs. Costs to switching come in many forms and understanding the nature of these costs is necessary if policy interventions to improve market co...
-
Gambi, Chiara; Hartsuiker, Robert J.
2016-01-01
Switching language is costly for bilingual speakers and listeners, suggesting that language control is effortful in both modalities. But are the mechanisms underlying language control similar across modalities? In this study, we attempted to answer this question by testing whether bilingual speakers incur a cost when switching to a different…
-
The costs of switching attentional sets
Dombrowe, I.C.; Donk, M.; Olivers, C.N.L.
2012-01-01
People prioritize those aspects of the visual environment that match their attentional set. In the present study, we investigated whether switching from one attentional set to another is associated with a cost. We asked observers to sequentially saccade toward two color-defined targets, one on the
-
The costs of switching attentional sets
Dombrowe, I.C.; Donk, M.; Olivers, C.N.L.
2011-01-01
People prioritize those aspects of the visual environment that match their attentional set. In the present study, we investigated whether switching from one attentional set to another is associated with a cost. We asked observers to sequentially saccade toward two color-defined targets, one on the
-
Reliability-cost models for the power switching devices of wind power converters
DEFF Research Database (Denmark)
Ma, Ke; Blaabjerg, Frede
2012-01-01
In order to satisfy the growing reliability requirements for the wind power converters with more cost-effective solution, the target of this paper is to establish a new reliability-cost model which can connect the relationship between reliability performances and corresponding semiconductor cost...... temperature mean value Tm and fluctuation amplitude ΔTj of power devices, are presented. With the proposed reliability-cost model, it is possible to enable future reliability-oriented design of the power switching devices for wind power converters, and also an evaluation benchmark for different wind power...... for power switching devices. First the conduction loss, switching loss as well as thermal impedance models of power switching devices (IGBT module) are related to the semiconductor chip number information respectively. Afterwards simplified analytical solutions, which can directly extract the junction...
-
Duijmelinck, Daniëlle M I D; Mosca, Ilaria; van de Ven, Wynand P M M
2015-05-01
Competitive health insurance markets will only enhance cost-containment, efficiency, quality, and consumer responsiveness if all consumers feel free to easily switch insurer. Consumers will switch insurer if their perceived switching benefits outweigh their perceived switching costs. We developed a conceptual framework with potential switching benefits and costs in competitive health insurance markets. Moreover, we used a questionnaire among Dutch consumers (1091 respondents) to empirically examine the relevance of the different switching benefits and costs in consumers' decision to (not) switch insurer. Price, insurers' service quality, insurers' contracted provider network, the benefits of supplementary insurance, and welcome gifts are potential switching benefits. Transaction costs, learning costs, 'benefit loss' costs, uncertainty costs, the costs of (not) switching provider, and sunk costs are potential switching costs. In 2013 most Dutch consumers switched insurer because of (1) price and (2) benefits of supplementary insurance. Nearly half of the non-switchers - and particularly unhealthy consumers - mentioned one of the switching costs as their main reason for not switching. Because unhealthy consumers feel not free to easily switch insurer, insurers have reduced incentives to invest in high-quality care for them. Therefore, policymakers should develop strategies to increase consumer choice. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.
-
Switching Fuzzy Guaranteed Cost Control for Nonlinear Networked Control Systems
Directory of Open Access Journals (Sweden)
Linqin Cai
2014-01-01
Full Text Available This paper deals with the problem of guaranteed cost control for a class of nonlinear networked control systems (NCSs with time-varying delay. A guaranteed cost controller design method is proposed to achieve the desired control performance based on the switched T-S fuzzy model. The switching mechanism is introduced to handle the uncertainties of NCSs. Based on Lyapunov functional approach, some sufficient conditions for the existence of state feedback robust guaranteed cost controller are presented. Simulation results show that the proposed method is effective to guarantee system’s global asymptotic stability and quality of service (QoS.
-
Cost-effective method of manufacturing a 3D MEMS optical switch
Carr, Emily; Zhang, Ping; Keebaugh, Doug; Chau, Kelvin
2009-02-01
growth of data and video transport networks. All-optical switching eliminates the need for optical-electrical conversion offering the ability to switch optical signals transparently: independent of data rates, formats and wavelength. It also provides network operators much needed automation capabilities to create, monitor and protect optical light paths. To further accelerate the market penetration, it is necessary to identify a path to reduce the manufacturing cost significantly as well as enhance the overall system performance, uniformity and reliability. Currently, most MEMS optical switches are assembled through die level flip-chip bonding with either epoxies or solder bumps. This is due to the alignment accuracy requirements of the switch assembly, defect matching of individual die, and cost of the individual components. In this paper, a wafer level assembly approach is reported based on silicon fusion bonding which aims to reduce the packaging time, defect count and cost through volume production. This approach is successfully demonstrated by the integration of two 6-inch wafers: a mirror array wafer and a "snap-guard" wafer, which provides a mechanical structure on top of the micromirror to prevent electrostatic snap-down. The direct silicon-to-silicon bond eliminates the CTEmismatch and stress issues caused by non-silicon bonding agents. Results from a completed integrated switch assembly will be presented, which demonstrates the reliability and uniformity of some key parameters of this MEMS optical switch.
-
Directory of Open Access Journals (Sweden)
Nyhuis Allen W
2009-05-01
Full Text Available Abstract Background Schizophrenia is a severe, chronic, and costly illness that adversely impacts patients' lives and health care payer budgets. Cost comparisons of treatment regimens are, therefore, important to health care payers and researchers. Pre-Post analyses ("mirror-image", where outcomes prior to a medication switch are compared to outcomes post-switch, are commonly used in such research. However, medication changes often occur during a costly crisis event. Patients may relapse, be hospitalized, have a medication change, and then spend a period of time with intense use of costly resources (post-medication switch. While many advantages and disadvantages of Pre-Post methodology have been discussed, issues regarding the attributability of costs incurred around the time of medication switching have not been fully investigated. Methods Medical resource use data, including medications and acute-care services (hospitalizations, partial hospitalizations, emergency department were collected for patients with schizophrenia who switched antipsychotics (n = 105 during a 1-year randomized, naturalistic, antipsychotic cost-effectiveness schizophrenia trial. Within-patient changes in total costs per day were computed during the pre- and post-medication change periods. In addition to the standard Pre-Post analysis comparing costs pre- and post-medication change, we investigated the sensitivity of results to varying assumptions regarding the attributability of acute care service costs occurring just after a medication switch that were likely due to initial medication failure. Results Fifty-six percent of all costs incurred during the first week on the newly initiated antipsychotic were likely due to treatment failure with the previous antipsychotic. Standard analyses suggested an average increase in cost-per-day for each patient of $2.40 after switching medications. However, sensitivity analyses removing costs incurred post-switch that were potentially
-
Coordination and Lock-In: Competition with Switching Costs and Network Effects
Farrell, Joseph; Klemperer, Paul
2006-01-01
Switching costs and network effects bind customers to vendors if products are incompatible, locking customers or even markets in to early choices. Lock-in hinders customers from changing suppliers in response to (predictable or unpredictable) changes in efficiency, and gives vendors lucrative ex post market power—over the same buyer in the case of switching costs (or brand loyalty), or over others with network effects. Firms compete ex ante for this ex post power, using penetration ...
-
Neural Mechanisms Underlying the Cost of Task Switching: An ERP Study
Li, Ling; Wang, Meng; Zhao, Qian-Jing; Fogelson, Noa
2012-01-01
Background When switching from one task to a new one, reaction times are prolonged. This phenomenon is called switch cost (SC). Researchers have recently used several kinds of task-switching paradigms to uncover neural mechanisms underlying the SC. Task-set reconfiguration and passive dissipation of a previously relevant task-set have been reported to contribute to the cost of task switching. Methodology/Principal Findings An unpredictable cued task-switching paradigm was used, during which subjects were instructed to switch between a color and an orientation discrimination task. Electroencephalography (EEG) and behavioral measures were recorded in 14 subjects. Response-stimulus interval (RSI) and cue-stimulus interval (CSI) were manipulated with short and long intervals, respectively. Switch trials delayed reaction times (RTs) and increased error rates compared with repeat trials. The SC of RTs was smaller in the long CSI condition. For cue-locked waveforms, switch trials generated a larger parietal positive event-related potential (ERP), and a larger slow parietal positivity compared with repeat trials in the short and long CSI condition. Neural SC of cue-related ERP positivity was smaller in the long RSI condition. For stimulus-locked waveforms, a larger switch-related central negative ERP component was observed, and the neural SC of the ERP negativity was smaller in the long CSI. Results of standardized low resolution electromagnetic tomography (sLORETA) for both ERP positivity and negativity showed that switch trials evoked larger activation than repeat trials in dorsolateral prefrontal cortex (DLPFC) and posterior parietal cortex (PPC). Conclusions/Significance The results provide evidence that both RSI and CSI modulate the neural activities in the process of task-switching, but that these have a differential role during task-set reconfiguration and passive dissipation of a previously relevant task-set. PMID:22860090
-
Neural mechanisms underlying the cost of task switching: an ERP study.
Directory of Open Access Journals (Sweden)
Ling Li
Full Text Available BACKGROUND: When switching from one task to a new one, reaction times are prolonged. This phenomenon is called switch cost (SC. Researchers have recently used several kinds of task-switching paradigms to uncover neural mechanisms underlying the SC. Task-set reconfiguration and passive dissipation of a previously relevant task-set have been reported to contribute to the cost of task switching. METHODOLOGY/PRINCIPAL FINDINGS: An unpredictable cued task-switching paradigm was used, during which subjects were instructed to switch between a color and an orientation discrimination task. Electroencephalography (EEG and behavioral measures were recorded in 14 subjects. Response-stimulus interval (RSI and cue-stimulus interval (CSI were manipulated with short and long intervals, respectively. Switch trials delayed reaction times (RTs and increased error rates compared with repeat trials. The SC of RTs was smaller in the long CSI condition. For cue-locked waveforms, switch trials generated a larger parietal positive event-related potential (ERP, and a larger slow parietal positivity compared with repeat trials in the short and long CSI condition. Neural SC of cue-related ERP positivity was smaller in the long RSI condition. For stimulus-locked waveforms, a larger switch-related central negative ERP component was observed, and the neural SC of the ERP negativity was smaller in the long CSI. Results of standardized low resolution electromagnetic tomography (sLORETA for both ERP positivity and negativity showed that switch trials evoked larger activation than repeat trials in dorsolateral prefrontal cortex (DLPFC and posterior parietal cortex (PPC. CONCLUSIONS/SIGNIFICANCE: The results provide evidence that both RSI and CSI modulate the neural activities in the process of task-switching, but that these have a differential role during task-set reconfiguration and passive dissipation of a previously relevant task-set.
-
The Effects Of Customer Satisfaction and Switching Costs On Customer Lo yalty In Health Care
Directory of Open Access Journals (Sweden)
Abidin Pişgin
2015-12-01
Full Text Available In recent years, the increasing number of private hospitals and the change in service quality and service requirements offered to patients in our country has led to an increase in competition for patients. Becauseof higher competition in healtcare sector, hospitals change their approach and focus more first on retention and then new patient acquisition. As a result, the relationship between satisfaction, trust, loyalty and switching costs as well as factors that affect these variables gain stratejik importance for hospital managements. Therefore, in this study, the relationship between satisfaction, loyalty and switching costs are investigated for university hospitals. Results show that satisfaction and direct effect of switching costs are important for loyalty. However, moderating effects of switching costs are not too strong.
-
Directory of Open Access Journals (Sweden)
Asmai Ishak
2014-06-01
Full Text Available AbstractThis study is aimed to investigate the role of Switching Costs in mediating the influences of Consumer Satisfaction and Trust on Consumer Loyalty by using Celular phone provider. 120 respondents were selected as sample using convinience sampling method. Structural Equation Modeling (SEM has been used to examine the hypotheses of this research. Findings indicate that all of the hypotheses are supported. In other words, Consumer Satisfaction and Trust influence the Consumer Loyalty both directly and indirectly through Swithcing Costs. These results are consistent with previous findings, and the same time, however, they reveal that Switching Costs does not fully mediate the influence of Consumer Satisfaction and Trust on Consumer Loyalty. The existence of direct influence of Consumer Satisfaction and Trust on Consumer Loyalty shows this evidence. Keywords: Consumer Loyalty, Switching Cost, Consumer Satisfaction and TrustAbstrakPenelitian ini bertujuan untuk meneliti peran Biaya Pengalihan (Switching Cost sebagai mediasi pengaruh Kepuasan Konsumen (Consumer Satisfaction dan Kepercayaan Konsumen (Consumer trust dalam menggunakan jasa penyedia telepon Celular. 120 responden dipilih sebagai sampel, menggunakan metode pengambilan sampel konfinien. Structural Equation Model (SEM telah digunakan untuk menguji hipotesis penelitian ini. Temuan menunjukkan bahwa semua hipotesis didukung. Dengan kata lain, Kepuasan Konsumen dan Kepercayaan Konsumen mempengaruhi Loyalitas Konsumen baik secara langsung maupun tidak langsung melalui Biaya Pengalihan. Hasil ini konsisten dengan temuan sebelumnya. Walaupun penelitian tersebut mengungkapkan bahwa Biaya Pengalihan tidak sepenuhnya memediasi pengaruh Kepuasan Konsumen dan Kepercayaan Konsumen pada Loyalitas Konsumen. Hal ini dibuktikan dengan adanya pengaruh langsung Kepuasan Konsumen dan Kepercayaan Konsumen pada Loyalitas Konsumen.Kata kunci: Loyalitas Konsumen, Switching Cost, Kepuasan Konsumen
-
Co-ordination and Lock-in: Competition with Switching Costs and Network Effects
Joseph Farrell; Paul Klemperer
2006-01-01
Switching costs and network effects bind customers to vendors if products are incompatible, locking customers or even markets in to early choices. Lock-in hinders customers from changing suppliers in response to (predictable or unpredictable) changes in effciency, and gives vendors lucrative ex post market power-over the same buyer in the case of switching costs (or brand loyalty), or over others with network effects. Firms compete ex ante for this ex post power, using penetration pricing, in...
-
DEFF Research Database (Denmark)
Zhang, Yifeng; Angelidaki, Irini
2016-01-01
Sustainable H2O2 supply and elimination of residual H2O2 are two key challenges to the Fenton processes treating recalcitrant contaminants. In this study, an innovative Bioelectro-Fenton system capable of alternate switching between microbial electrolysis cell (MEC) and microbial fuel cell (MFC......) mode of operation was developed to meet the challenges. In the MEC mode, H2O2 was electrochemically produced which reacts with Fenton’s reagent (Fe II) to form hydroxyradical. The residual H2O2 (unused H2O2) is removed as electron acceptor by switching the system to MFC mode. Complete decolorization...
-
Toolsema-Veldman, Linda
2009-01-01
In a vertical differentiation model where both duopolists supply the same two qualities of an otherwise homogeneous product, we derive the critical level of the interfirm switching cost needed to sustain monopoly pricing. In particular, we show how a decrease in the intrafirm switching cost may
-
Costs of switching auditory spatial attention in following conversational turn-taking
Directory of Open Access Journals (Sweden)
Gaven eLin
2015-04-01
Full Text Available Following a multi-talker conversation relies on the ability to rapidly and efficiently shift the focus of spatial attention from one talker to another. The current study investigated the listening costs associated with shifts in spatial attention during conversational turn-taking in 16 normally-hearing listeners using a novel sentence recall task. Three pairs of syntactically fixed but semantically unpredictable matrix sentences, recorded from a single male talker, were presented concurrently through an array of three loudspeakers (directly ahead and +/-30° azimuth. Subjects attended to one spatial location, cued by a tone, and followed the target conversation from one sentence to the next using the call-sign at the beginning of each sentence. Subjects were required to report the last three words of each sentence (speech recall task or answer multiple choice questions related to the target material (speech comprehension task. The reading span test, attention network test, and trail making test were also administered to assess working memory, attentional control, and executive function. There was a 10.7 ± 1.3% decrease in word recall, a pronounced primacy effect, and a rise in masker confusion errors and word omissions when the target switched location between sentences. Switching costs were independent of the location, direction, and angular size of the spatial shift but did appear to be load dependent and only significant for complex questions requiring multiple cognitive operations. Reading span scores were positively correlated with total words recalled, and negatively correlated with switching costs and word omissions. Task switching speed (Trail-B time was also significantly correlated with recall accuracy. Overall, this study highlights i the listening costs associated with shifts in spatial attention and ii the important role of working memory in maintaining goal relevant information and extracting meaning from dynamic multi
-
Willemse-Duijmelinck, Daniëlle M I D; van de Ven, Wynand P M M; Mosca, Ilaria
2017-10-01
Nearly everyone with a supplementary insurance (SI) in the Netherlands takes out the voluntary SI and the mandatory basic insurance (BI) from the same health insurer. Previous studies show that many high-risks perceive SI as a switching cost for BI. Because consumers' current insurer provides them with a guaranteed renewability, SI is a switching cost if insurers apply selective underwriting to new applicants. Several changes in the Dutch health insurance market increased insurers' incentives to counteract adverse selection for SI. Tools to do so are not only selective underwriting, but also risk rating and product differentiation. If all insurers use the latter tools without selective underwriting, SI is not a switching cost for BI. We investigated to what extent insurers used these tools in the periods 2006-2009 and 2014-2015. Only a few insurers applied selective underwriting: in 2015, 86% of insurers used open enrolment for all their SI products, and the other 14% did use open enrolment for their most common SI products. As measured by our indicators, the proportion of insurers applying risk rating or product differentiation did not increase in the periods considered. Due to the fear of reputation loss insurers may have used 'less visible' tools to counteract adverse selection that are indirect forms of risk rating and product differentiation and do not result in switching costs. So, although many high-risks perceive SI as a switching cost, most insurers apply open enrolment for SI. By providing information to high-risks about their switching opportunities, the government could increase consumer choice and thereby insurers' incentives to invest in high-quality care for high-risks. Copyright © 2017 Elsevier B.V. All rights reserved.
-
Yosswanta, Tigrent; Susanto, Michael Triadi; Ervanto, Edwin
2015-01-01
Tujuan penelitian ini adalah untuk mengetahui sejauh mana pengaruh Relationship Marketing dan Switching Cost terhadap Customer Loyalty di Hotel “X” Surabaya. Jenis penelitian yang digunakan adalah kuantitatif kausal yang bertujuan menguji hubungan sebab akibat. Sedangkan teknik pengumpulan data yang digunakan adalah kuesioner. Berdasarkan hasil penelitian yang diperoleh menunjukkan Relationship Marketing berpengaruh positif dan signifikan terhadap Customer Loyalty. Sedangkan, Switching Cost b...
-
Guaranteed cost control of mobile sensor networks with Markov switching topologies.
Zhao, Yuan; Guo, Ge; Ding, Lei
2015-09-01
This paper investigates the consensus seeking problem of mobile sensor networks (MSNs) with random switching topologies. The network communication topologies are composed of a set of directed graphs (or digraph) with a spanning tree. The switching of topologies is governed by a Markov chain. The consensus seeking problem is addressed by introducing a global topology-aware linear quadratic (LQ) cost as the performance measure. By state transformation, the consensus problem is transformed to the stabilization of a Markovian jump system with guaranteed cost. A sufficient condition for global mean-square consensus is derived in the context of stochastic stability analysis of Markovian jump systems. A computational algorithm is given to synchronously calculate both the sub-optimal consensus controller gains and the sub-minimum upper bound of the cost. The effectiveness of the proposed design method is illustrated by three numerical examples. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.
-
Directory of Open Access Journals (Sweden)
Vu Minh Ngo
2017-05-01
Full Text Available Switching cost highlights the way how companies create barriers to proactively prevent customer defection which directly and significantly affects customer loyalty and then companies’ performance. The purpose of this paper is to provide empirical evidences about the impact of switching cost on customer loyalty by examining its mediating and moderating effects on the relationships between service value, customer satisfaction and customer loyalty. Specially, two difference types of switching costs, positive one and negative one, are proposed and tested independently in order to provide more insights about their impacts. The data about switching costs and other constructs are collected from 261 retail banking customers, and analysed using structural equation modelling and moderated path analysis. It is found that positive switching costs increase customer loyalty by partly transforming the effect of service value and customer satisfaction into customer loyalty. While negative switching cost only mediates the service value-loyalty relationship. Moreover, only negative switching cost has significant moderating effect on the satisfaction-loyalty relationships. Finally, the analysis reveals that negative switching cost might also weaken good impacts from positive switching cost on satisfaction-loyalty relationships.
-
Cisneros, J L; Del Rio, R; Palou, J
1998-10-01
The combination of low concentrations of sclerosing solution and the Nd:YAG, Q-switched laser with multiple (quadruple) frequency provides good results in the treatment of telangiectases and reticular varicose veins of the lower extremities, as well as pigmentation that may appear during sclerotherapy. This paper is based on a series of patients with telangiectases and reticular veins who were treated with sclerotherapy and the Nd:YAG, Q-switched laser with quadruple frequency. Patients with telangiectases and reticular veins received two or three treatment sessions with polydocanol and the Nd:YAG, Q-switched laser with quadruple frequency. Then, they were assessed a clinical score corresponding to the level of improvement achieved. Residual hematic pigmentation lesions were also eliminated with the laser. Excellent improvement was evident in 90% of the patients with minimal residual lesions. The combined technique of sclerosing solution and the Nd:YAG laser with multiple frequency is a valid alternative for the elimination of telangiectases and reticular veins of the lower limbs. This technique has several advantages, such as the use of low concentrations of sclerosing solution, high patient acceptance levels due to minimal disturbances, and the fact that local anesthesia is unnecessary. Good results are obtained without complications and minimal residual pigmentation. These mild pigmentation can be treated with the Nd:YAG laser.
-
Jones, Thomas S; Bilton, Adam R; Mak, Lorraine; Sait, Steven M
2015-01-01
Parasitoids face challenges by switching between host species that influence survival and fitness, determine their role in structuring communities, influence species invasions, and affect their importance as biocontrol agents. In the generalist parasitoid, Venturia canescens (Gravenhorst) (Hymenoptera: Ichneumonidae), we investigated the costs in encapsulation, survival, and body size on juveniles when adult parasitoids switched from their original host, Plodia interpunctella (Hübner) (Lepidotera, Pyralidae) to a novel host, Ephestia kuehniella (Zeller) (Lepidoptera, Pyralidae), over multiple generations. Switching had an initial survival cost for juvenile parasitoids in the novel host, but increased survival occurred within two generations. Conversely, mortality in the original host increased. Body size, a proxy for fecundity, also increased with the number of generations in the novel host species, reflecting adaptation or maternal effects due to the larger size of the novel host, and therefore greater resources available to the developing parasitoid. Switching to a novel host appears to have initial costs for a parasitoid, even when the novel host may be better quality, but the costs rapidly diminish. We predict that the net cost of switching to a novel host for parasitoids will be complex and will depend on the initial reduction in fitness from parasitizing a novel host versus local adaptations against parasitoids in the original host.
-
Kray, Jutta
2006-08-11
Adult age differences in task switching and advance preparation were examined by comparing cue-based and memory-based switching conditions. Task switching was assessed by determining two types of costs that occur at the general (mixing costs) and specific (switching costs) level of switching. Advance preparation was investigated by varying the time interval until the next task (short, middle, very long). Results indicated that the implementation of task sets was different for cue-based switching with random task sequences and memory-based switching with predictable task sequences. Switching costs were strongly reduced under cue-based switching conditions, indicating that task-set cues facilitate the retrieval of the next task. Age differences were found for mixing costs and for switching costs only under cue-based conditions in which older adults showed smaller switching costs than younger adults. It is suggested that older adults adopt a less extreme bias between two tasks than younger adults in situations associated with uncertainty. For cue-based switching with random task sequences, older adults are less engaged in a complete reconfiguration of task sets because of the probability of a further task change. Furthermore, the reduction of switching costs was more pronounced for cue- than memory-based switching for short preparation intervals, whereas the reduction of switch costs was more pronounced for memory- than cue-based switching for longer preparation intervals at least for older adults. Together these findings suggest that the implementation of task sets is functionally different for the two types of task-switching conditions.
-
Production rates and costs of cable yarding wood residue from clearcut units
Chris B. LeDoux
1984-01-01
Wood residue is a little used source of fiber, chips, and fuel because harvest costs are largely unknown. This study calculates incremental production rates and costs for yarding and loading logging residue in clearcut old-growth Douglas-fir/western hemlock forests. Harvest operations were observed for two timber sales in western Oregon. Three different cable yarding...
-
Guaranteed Cost Finite-Time Control of Fractional-Order Positive Switched Systems
Directory of Open Access Journals (Sweden)
Leipo Liu
2017-01-01
Full Text Available The problem of guaranteed cost finite-time control of fractional-order positive switched systems (FOPSS is considered in this paper. Firstly, a new cost function is defined. Then, by constructing linear copositive Lyapunov functions and using the average dwell time (ADT approach, a state feedback controller and a static output feedback controller are constructed, respectively, and sufficient conditions are derived to guarantee that the corresponding closed-loop systems are guaranteed cost finite-time stable (GCFTS. Such conditions can be easily solved by linear programming. Finally, two examples are given to illustrate the effectiveness of the proposed method.
-
Modality Switching Cost during Property Verification by 7 Years of Age
Ambrosi, Solene; Kalenine, Solene; Blaye, Agnes; Bonthoux, Francoise
2011-01-01
Recent studies in neuroimagery and cognitive psychology support the view of sensory-motor based knowledge: when processing an object concept, neural systems would re-enact previous experiences with this object. In this experiment, a conceptual switching cost paradigm derived from Pecher, Zeelenberg, and Barsalou (2003, 2004) was used to…
-
Loughlin, Daniel H; Macpherson, Alexander J; Kaufman, Katherine R; Keaveny, Brian N
2017-10-01
A marginal abatement cost curve (MACC) traces out the relationship between the quantity of pollution abated and the marginal cost of abating each additional unit. In the context of air quality management, MACCs are typically developed by sorting control technologies by their relative cost-effectiveness. Other potentially important abatement measures such as renewable electricity, energy efficiency, and fuel switching (RE/EE/FS) are often not incorporated into MACCs, as it is difficult to quantify their costs and abatement potential. In this paper, a U.S. energy system model is used to develop a MACC for nitrogen oxides (NO x ) that incorporates both traditional controls and these additional measures. The MACC is decomposed by sector, and the relative cost-effectiveness of RE/EE/FS and traditional controls are compared. RE/EE/FS are shown to have the potential to increase emission reductions beyond what is possible when applying traditional controls alone. Furthermore, a portion of RE/EE/FS appear to be cost-competitive with traditional controls. Renewable electricity, energy efficiency, and fuel switching can be cost-competitive with traditional air pollutant controls for abating air pollutant emissions. The application of renewable electricity, energy efficiency, and fuel switching is also shown to have the potential to increase emission reductions beyond what is possible when applying traditional controls alone.
-
Orr, Joseph M.; Weissman, Daniel H.
2010-01-01
Bottom-up biases are widely thought to influence task choice in the voluntary task switching paradigm. Definitive support for this hypothesis is lacking, however, because task choice and task performance are usually confounded. We therefore revisited this hypothesis using a paradigm in which task choice and task performance are temporally separated. As predicted, participants tended to choose the task that was primed by bottom-up biases. Moreover, such choices were linked to increased switch costs during subsequent task performance. These findings provide compelling evidence that bottom-up biases influence voluntary task choice. They also suggest that succumbing to such biases reflects a reduction of top-down control that persists to influence upcoming task performance. PMID:21713192
-
Custos de mudança em serviços logísticos Switching costs in logistics service
Directory of Open Access Journals (Sweden)
Philippe Aymard
2009-09-01
Full Text Available Os custos relacionados às dificuldades inerentes à troca de um fornecedor para outro, também chamados de Custos de Mudança, estão presentes em todas as relações entre empresas. No entanto, o tema carece de estudos que analisem a inserção desses custos no processo de decisão de compra de compradores empresariais. O presente estudo explora o tema da troca de fornecedor nas empresas e os Custos de Mudança a ela associados, objetivando identificar a percepção dos gestores sobre os Custos de Mudança e como procuram minimizar estes custos. Uma pesquisa exploratória que coletou dados por meio de entrevistas em profundidade com compradores de serviços logísticos de indústrias químicas e petroquímicas do Estado de São Paulo foi conduzida. Os dados coletados foram analisados e interpretados segundo a técnica de análise de conteúdo. Os resultados mostram que os Custos de Mudança são de naturezas diversas, proporcionando impactos diferentes na decisão de compra. Uma parte destes custos tem caráter subjetivo, sendo, portanto, de difícil quantificação monetária. A pesquisa identificou que a percepção dos Custos de Mudança é afetada por fatores, como satisfação em relação ao serviço prestado pelo fornecedor atual e a complexidade do bem comprado. As empresas buscam evitar estes custos fazendo mudanças graduais e procurando não estabelecer cláusulas de garantias com penalidades monetárias para a quebra de contratos, a menos que existam investimentos específicos da relação em jogo.Switching costs are related to difficulties which emerge when suppliers are changed to new ones, and they exist in all supply chain relationships. Despite the subject importance to the buying decision process, there is not much evidence about how buyers in the business-to-business setting consider them in their working routine. The main proposal here is to present an exploratory discussion on how buyers deal with switching costs and how
-
Guaranteed Cost Finite-Time Control of Discrete-Time Positive Impulsive Switched Systems
Directory of Open Access Journals (Sweden)
Leipo Liu
2018-01-01
Full Text Available This paper considers the guaranteed cost finite-time boundedness of discrete-time positive impulsive switched systems. Firstly, the definition of guaranteed cost finite-time boundedness is introduced. By using the multiple linear copositive Lyapunov function (MLCLF and average dwell time (ADT approach, a state feedback controller is designed and sufficient conditions are obtained to guarantee that the corresponding closed-loop system is guaranteed cost finite-time boundedness (GCFTB. Such conditions can be solved by linear programming. Finally, a numerical example is provided to show the effectiveness of the proposed method.
-
Sensorless control of low-cost single-phase hybrid switched reluctance motor drive
DEFF Research Database (Denmark)
Jakobsen, Uffe; Lu, Kaiyuan; Rasmussen, Peter Omand
2013-01-01
This paper presents a sensorless-controlled, low-cost, low-power, variable-speed drive system suitable for fan and pump applications. The main advantages of this drive system are the low system cost, simple converter structure, and simple but robust sensorless control technique. The drive motor...... is a special Hybrid Switched Reluctance Motor (HSRM). The proposed sensorless control method utilizes beneficially the stator side permanent magnet field and its performance is motor parameter independent. The unique low-cost drive system solution, simple and robust sensorless control features of this drive...
-
Sensorless Control of Low-cost Single-phase Hybrid Switched Reluctance Motor Drive
DEFF Research Database (Denmark)
Jakobsen, Uffe; Lu, Kaiyuan; Rasmussen, Peter Omand
2015-01-01
This paper presents a sensorless-controlled, low-cost, low-power, and variable-speed drive system suitable for fan and pump applications. The main advantages of this drive system are the low system cost, simple converter structure, and simple but robust sensorless control technique. The drive motor...... is a special hybrid switched reluctance motor. The proposed sensorless control method beneficially utilizes the stator side PM field and its performance is motor parameter independent. The unique low-cost drive system solution, simple and robust sensorless control features of this drive system, is demonstrated...
-
Mohamad Dimyati
2015-01-01
The aim of this research was to examine the effects of customer satisfaction towards trust in the brand, switching cost towards trust in the brand, customer satisfaction towards customer retention, switching cost towards customer retention and trust in the brand towards customer retention. A total sample of 120 respondents living in the town of Jember was collected through purposive sampling technique. The model analysis applied was Structural Equation Modeling (SEM). The resul...
-
Directory of Open Access Journals (Sweden)
Amna Riaz
2018-01-01
Full Text Available Microelectromechanical Systems (MEMS are devices made up of several electrical and mechanical components. They consist of mechanical functions (sensing, thermal, inertial and electrical functions (switching, decision making on a single chip made by microfabrication methods. These chips exhibit combined properties of the two functions. The size of system has characteristic dimensions less than 1mm but more than 1μm. The configuration of these components determine the final deliverables of the switch. MEMS can be designed to meet user requirements on any level from microbiological application such as biomedical transducers or tissue engineering, to mechanical systems such as microfluidic diagnoses or chemical fuel cells. The low cost, small mass and minimal power consumption of the MEMS makes it possible to readily integrate to any kind of system in any environment. MEMS are faster, better and cheaper. They offer excellent electrical performances. MEMS working at Radio frequencies are RF MEMS. RF-MEMS switches find huge market in the modern telecommunication networks, biological, automobiles, satellites and defense systems because of their lower power consumptions at relatively higher frequencies and better electrical performances. But the reliability is the major hurdle in the fate of RF MEMS switches. Reliability mainly arises due to the presence of residual stresses, charging current, fatigue and creep and contact degradation. The presence of residual stresses in switches the S-Parameters of the switches are affected badly and the residual stress affects the final planarity of the fabricated structure. Design and simulation of an RF-MEMS switch is proposed considering the residual stresses in both on and off state. The operating frequency band is being optimized and the best possible feasible fabrication technique for the proposed switch design is being analyzed. S-Parameters are calculated and a comparison for the switches with stress and
-
Directory of Open Access Journals (Sweden)
Michele Wilson
2016-03-01
Full Text Available Background: Schizophrenia is associated with high direct healthcare costs due to progression of disease and frequent occurrence of relapses. Aripiprazole once-monthly (AOM has been shown to reduce total psychiatric hospitalizations among patients who switched from oral standard of care (SOC therapy to AOM in a multicenter, open-label, mirror-image study of patients with schizophrenia. Because of the increasing need to improve patient outcomes while containing costs, it is important to understand the impact of AOM treatment initiation on medical costs associated with psychiatric hospitalizations and antipsychotic pharmacy costs. Methods: In the current study, an economic model was developed using data from the AOM mirror-image study to evaluate the psychiatric hospitalization-related medical costs and antipsychotic pharmacy costs during a 6-month period before (retrospective period and after (prospective period the AOM treatment initiation. The economic model evaluated cost-saving potential of AOM among all patients (n=433 as well as a subset of patients with ≥1 prior hospitalization (n=165 who switched from oral SOC to AOM. Unit cost data were obtained from publicly available sources. Results: Both hospitalizations and hospital days were reduced following a switch from oral SOC to AOM. As a result, psychiatric hospitalization-related costs were lower during the prospective period when compared with the retrospective period. Furthermore, the increase in antipsychotic pharmacy costs due to switching from oral SOC to AOM was offset by a reduction in psychiatric hospitalization-related medical costs. Per-patient costs were reduced by $1,046 (USD in the overall population and by $20,353 in a subset of patients who had at least 1 psychiatric hospitalization during the retrospective period. Results were most sensitive to changes in hospitalization costs. Conclusions: AOM is associated with reducing the risk of relapse among patients with
-
Energy information. Status, cost, and need for energy, consumption and fuel switching data
International Nuclear Information System (INIS)
Fultz, Keith O.; Milans, Flora H.; Hale, Richard A.; Weaver, Joanne E.; D'Amico, Nicholas C.
1989-04-01
In 1986, EIA's Manufacturing Energy Consumption Survey collected calendar year 1985 fuel switching and energy consumption information from a sample of manufacturers. Although the construction, agriculture, mining, fishing, and forestry segments of the industrial sector were not surveyed, in 1985 the manufacturing segment accounted for about 75 to 80 percent of the total energy consumed in the industrial sector. The results of the energy consumption segment of the survey were published in November 1988, and the results of the fuel switching segment were published in December 1988. In 1989, EIA will conduct the second triennial survey, collecting energy consumption and fuel switching data for 1988. EIA estimated that the cost of the survey to the U.S. government, consisting of EIA and Census Bureau costs to design and conduct the survey, was about $1.8 million (in 1988 dollars) and that the cost to the manufacturers participating in the survey was more than $4 million (in 1988 dollars). According to EIA's justification to the Office of Management and Budget (OMB) for the survey, most of the potential users of the survey data were federal offices. Officials of seven of the eight federal offices we contacted indicated various uses for the energy consumption data, such as updating the national input-output tables and energy accounts, analyzing the competitiveness of U.S. industries, and doing energy emergency contingency planning. Officials of five of the eight federal offices indicated uses for the fuel switching data and most frequently cited its use for contingency planning for emergencies or supply disruptions. EIA's justification to OMB also identified 17 states as potential users, but officials of the 3 state offices that we contacted told us that the EIA data would not be useful because it cannot be summarized for individual states
-
Directory of Open Access Journals (Sweden)
Raúl López-Benítez
2017-06-01
Full Text Available Many studies have shown the beneficial effect of positive emotions on various cognitive processes, such as creativity and cognitive flexibility. Cheerfulness, understood as an affective predisposition to sense of humor, has been associated with positive emotions. So far, however, no studies have shown the relevance of this dimension in cognitive flexibility processes. The aim of this research was to analyze the relationship between cheerfulness and these processes. To this end, we carried out two studies using a task-switching paradigm. Study 1 aimed at analyzing whether high trait cheerfulness was related to better cognitive flexibility (as measured by reduced task-switching costs, whereas Study 2 aimed at replicating the pattern of data observed in Study 1. The total sample was composed of 139 participants (of which 86 were women selected according to their high versus low scores in trait cheerfulness. In a random way, participants had to judge whether the face presented to them in each trial was that of a man or a woman (gender recognition task or whether it expressed anger or happiness (expressed emotion recognition task. We expected participants with high versus low trait cheerfulness to show a lower task-switching cost (i.e., higher cognitive flexibility. Results did not confirm this hypothesis. However, in both studies, participants with high versus low trait cheerfulness showed a higher facilitation effect when the stimuli attributes were repeated and also when a cue was presented anticipating the demand to perform. We discuss the relevance of these results for a better understanding of cheerfulness.
-
Low-Crosstalk Composite Optical Crosspoint Switches
Pan, Jing-Jong; Liang, Frank
1993-01-01
Composite optical switch includes two elementary optical switches in tandem, plus optical absorbers. Like elementary optical switches, composite optical switches assembled into switch matrix. Performance enhanced by increasing number of elementary switches. Advantage of concept: crosstalk reduced to acceptably low level at moderate cost of doubling number of elementary switches rather than at greater cost of tightening manufacturing tolerances and exerting more-precise control over operating conditions.
-
Logistics cost analysis of rice residues for second generation bioenergy production in Ghana
DEFF Research Database (Denmark)
Vijay Ramamurthi, Pooja; Cristina Fernandes, Maria; Nielsen, Per Sieverts
2014-01-01
This study explores the techno-economic potential of rice residues as a bioenergy resource to meet Ghana’s energy demands. Major rice growing regions of Ghana have 70–90% of residues available for bioenergy production. To ensure cost-effective biomass logistics, a thorough cost analysis was made...... for two bioenergy routes. Logistics costs for a 5MWe straw combustion plant were 39.01, 47.52 and 47.89USD/t for Northern, Ashanti and Volta regions respectively. Logistics cost for a 0.25MWe husk gasification plant (with roundtrip distance 10km) was 2.64USD/t in all regions. Capital cost (66......–72%) contributes significantly to total logistics costs of straw, however for husk logistics, staff (40%) and operation and maintenance costs (46%) dominate. Baling is the major processing logistic cost for straw, contributing to 46–48% of total costs. Scale of straw unit does not have a large impact on logistic...
-
Directory of Open Access Journals (Sweden)
Llibre JM
2013-05-01
Full Text Available Josep M Llibre,1,2 Gloria Cardona,3 José R Santos,2 Angels Andreu,3 Josep O Estrada,4 Jordi Ara,4 Xavier Bonafont,3 Bonaventura Clotet1,21HIV Unit, University Hospital Germans Trias i Pujol, Badalona, Barcelona, Spain; 2Lluita contra la SIDA Foundation, Badalona, Barcelona, Spain; 3Hospital Pharmacy, University Hospital Germans Trias i Pujol, Badalona, Barcelona, Spain; 4Hospital Management, University Hospital Germans Trias i Pujol, Badalona, Barcelona, SpainBackground: The current economic recession in European countries has forced governments to design emergency measures to reduce spending on drugs, including antiretroviral therapy (ART. Switching antiretroviral drugs for others that have the same efficacy and safety profile at a lower cost (cost-reduction measures, CRM could prove to be a valid means of generating savings.Methods: Descriptive study of prospective consensus-based CRM undertaken in 2011 in a Catalonian hospital HIV unit among patients with prolonged plasma HIV-1 RNA <50 copies/mL.Results: During the study period, we made 673 switches (87.5% more than the previous year, of which 378 (56.2% were CRM (16% of all patients treated, leading to a savings of €87,410/month. Switching tenofovir/emtricitabine for abacavir/lamivudine was the most common CRM (129, 31.3%, followed by simplification to boosted protease inhibitor monotherapy (bPImono, 102, 26%. The CRM that generated the greatest saving were switching to bPImono (38%, withdrawal or replacement of raltegravir (24%, switching tenofovir/emtricitabine for abacavir/lamivudine (13%, and switching to nevirapine (5%. Cost savings with CRM were slightly higher than those achieved with medication paid for by clinical trial sponsors (€80,333/month or through discount arrangements (€76,389/month.Conclusion: Proactively switching antiretroviral therapy in selected treated patients with sustained virological suppression can generate significant cost savings in pharmacy spending in
-
Revuelta-Herrero, José Luis; Chamorro-de-Vega, Esther; Rodríguez-González, Carmen Guadalupe; Alonso, Roberto; Herranz-Alonso, Ana; Sanjurjo-Sáez, María
2018-01-01
Evidence about the use of dolutegravir (DTG) and rilpivirine (RPV) as an antiretroviral therapy (ART) in treatment-experienced patients is scarce. To explore the effectiveness, safety, and costs of switching to a DTG plus RPV regimen in this population. This observational, prospective study included all treatment-experienced patients who switched to DTG plus RPV between November 2014 and July 2016. Patients were excluded if resistance mutations to integrase inhibitors or RPV were found. The effectiveness endpoint was the proportion of patients who achieved virological suppression (viral load [VL] 90% increased from 65.6% to 93.8% ( P = 0.004). The annual per-patient ART costs dropped by €665 ( P = 0.265). Switching to DTG plus RPV seems to be an effective and safe strategy. Significant improvements in patients' adherence and costs were achieved.
-
Logistics cost analysis of rice residues for second generation bioenergy production in Ghana.
Vijay Ramamurthi, Pooja; Cristina Fernandes, Maria; Sieverts Nielsen, Per; Pedro Nunes, Clemente
2014-12-01
This study explores the techno-economic potential of rice residues as a bioenergy resource to meet Ghana's energy demands. Major rice growing regions of Ghana have 70-90% of residues available for bioenergy production. To ensure cost-effective biomass logistics, a thorough cost analysis was made for two bioenergy routes. Logistics costs for a 5 MWe straw combustion plant were 39.01, 47.52 and 47.89 USD/t for Northern, Ashanti and Volta regions respectively. Logistics cost for a 0.25 MWe husk gasification plant (with roundtrip distance 10 km) was 2.64 USD/t in all regions. Capital cost (66-72%) contributes significantly to total logistics costs of straw, however for husk logistics, staff (40%) and operation and maintenance costs (46%) dominate. Baling is the major processing logistic cost for straw, contributing to 46-48% of total costs. Scale of straw unit does not have a large impact on logistic costs. Transport distance of husks has considerable impact on logistic costs. Copyright © 2014 Elsevier Ltd. All rights reserved.
-
Cost Methodology for Biomass Feedstocks: Herbaceous Crops and Agricultural Residues
Energy Technology Data Exchange (ETDEWEB)
Turhollow Jr, Anthony F [ORNL; Webb, Erin [ORNL; Sokhansanj, Shahabaddine [ORNL
2009-12-01
This report describes a set of procedures and assumptions used to estimate production and logistics costs of bioenergy feedstocks from herbaceous crops and agricultural residues. The engineering-economic analysis discussed here is based on methodologies developed by the American Society of Agricultural and Biological Engineers (ASABE) and the American Agricultural Economics Association (AAEA). An engineering-economic analysis approach was chosen due to lack of historical cost data for bioenergy feedstocks. Instead, costs are calculated using assumptions for equipment performance, input prices, and yield data derived from equipment manufacturers, research literature, and/or standards. Cost estimates account for fixed and variable costs. Several examples of this costing methodology used to estimate feedstock logistics costs are included at the end of this report.
-
Directory of Open Access Journals (Sweden)
Van Reybroeck Marie
2014-11-01
Full Text Available This study clarifies the impact of switching context between noun and verb number agreement rules in written language production. In Experiment 1, children from grade 3 to 6 were asked to fill in sentences with nouns and verbs in either a switching condition (noun followed by verb or a repeating condition (noun followed by noun. The results showed that third- and fourth-grade children produced more erroneous agreements in the switching condition than in the repeating condition, showing that switching between rules comes at a cost, whereas fifth- and sixth-grade participants’ performance was not affected by the switching context. Based on these findings, Experiment 2 aimed to assess whether a switching treatment offers a greater opportunity to improve the acquisition of grammatical agreement production, as compared to a simple treatment. Teachers from grade 3 gave either a switching treatment (mixed noun and verb exercises or a simple treatment (noun exercises followed by verb exercises. The results show that children learned better from the switching treatment than from the simple treatment. These findings highlight the cost of switching between noun and verb agreement rules during the acquisition of grammatical number agreement and also how grammatical spelling acquisition can be improved at school.
-
Cost of the radioactive residues of nuclear power
International Nuclear Information System (INIS)
1986-06-01
The calculation of cost for the management and final storage of spent nuclear fuel and radioactive waste is presented. The continuing Research and Development activities are judged to render simplified designs. The existing and planned systems and and plans are as follows: - transport system for radioactive residues - central intermediate storage of spent fuel, CLAB - processing of spent fuel - final storing of long-lived waste - final storing of reactor waste and decommissioning waste, SFR. The total future cost of the Swedish waste management is calculated to be 39 billion SEK from 1987 and 60 years onwards. 5.3 billion SEK have been spent up to the year 1986. (G.B.)
-
Single-Phase Hybrid Switched Reluctance Motor for Low-Power Low-Cost Applications
DEFF Research Database (Denmark)
Lu, Kaiyuan; Rasmussen, Peter Omand; Jakobsen, Uffe
2011-01-01
This paper presents a new single-phase, Hybrid Switched Reluctance (HSR) motor for low-cost, low-power, pump or fan drive systems. Its single-phase configuration allows use of a simple converter to reduce the system cost. Cheap ferrite magnets are used and arranged in a special flux concentration...... manner to increase effectively the torque density and efficiency of this machine. The efficiency of this machine is comparable to the efficiency of a traditional permanent magnet machine in the similar power range. The cogging torque, due to the existence of the permanent magnetic field, is beneficially...
-
International Nuclear Information System (INIS)
Nelson, Brian A.
2006-01-01
Limited resources force most smaller fusion energy research experiments to have little or no feedback control of their operational parameters, preventing achievement of their full operational potential. Recent breakthroughs in high-power switching technologies have greatly reduced feedback-controlled power supply costs, primarily those classified as switching power amplifiers. However, inexpensive and flexible controllers for these power supplies have not been developed. A uClinux-based micro-controller (Analog Devices Blackfin BF537) was identified as having the capabilities to form the base of a digital control system for switching power amplifiers. A control algorithm was created, and a Linux character device driver was written to realize the algorithm. The software and algorithm were successfully tested on a switching power amplifier and magnetic field coil using University of Washington (subcontractor) resources
-
Dewi, Maya Trisna
2012-01-01
Penelitian ini bertujuan untuk menganalisis: 1) pengaruh perceived value terhadap customer satisfaction, 2) pengaruh perceived quality terhadap customer satisfaction, 3) pengaruh customer satisfaction terhadap customer loyalty, 4) pengaruh customer satisfaction terhadap switching cost, 5) pengaruh switching cost terhadap customer loyalty. Penelitian ini dilakukan di BRI Cabang Solo Slamet Riyadi dengan menggunakan sampel sebanyak 110 responden. Metode sampel dengan purposive sampling. Hasil ...
-
Control of systems with costs related to switching: applications to air-condition systems
DEFF Research Database (Denmark)
Thybo (Deng), Honglian; Larsen, Lars Finn Sloth; Stoustrup, Jakob
2009-01-01
The objective of this paper is to investigate a low complexity method for controlling systems with binary inputs that have costs related to switching. The control objective for this type of systems is often a trade off between the deviation from the reference and the number of switches (weariness...... energy efficiency etc.). For such systems a steady state solution might never be attained, but rather the optimal behavior might be constituted by a limit cycle. In this paper we consider the problem of finding and controlling the system towards an optimal limit cycle. A low complexity approach giving...
-
Vu Minh Ngo; Drahomíra Pavelková
2017-01-01
Switching cost highlights the way how companies create barriers to proactively prevent customer defection which directly and significantly affects customer loyalty and then companies’ performance. The purpose of this paper is to provide empirical evidences about the impact of switching cost on customer loyalty by examining its mediating and moderating effects on the relationships between service value, customer satisfaction and customer loyalty. Specially, two difference types of switching co...
-
The role of research and development work on the production costs of logging residue chips
International Nuclear Information System (INIS)
Nousiainen, I.
1998-01-01
Purchase of logging residue chips in the early 80s was mainly based on production chains in which the residues were collected with load-carrying tractors at the road-side storage, from which it was chipped or crushed directly into the trailer of a waiting lorry. Six new production chains were developed in the national Bioenergy Research Programme. Three of these are now commercial. Kotimaiset Energiat Pekka Lahti Ky has developed, on the basis of a traditional logging residue production chain, a high-efficiency EVOLUTION intermediate storage chipper, suitable for chipping of logging residues. Oy Logset Ab has developed a new type of lot-chipping chip-harvester, the LOGSET 536C. Nested containers have also been developed for the lot-chipping method. MOHA multi-purpose chipper, in which the chipping and lorry-transportation of chips have been integrated, has also been developed as a part of the research programme. In addition to these, a chipper-container lorry combination, transportation of complete logging residues, and whole- tree skidding have been developed in the project for production of logging residue chips. In the beginning of the 80s the production costs of logging residues at the place of utilization were about 52 FIM/MWh, and the average transportation distance 50 km. In 1992 the production costs, 64 FIM/MWh at the distance of 100 km, was significantly higher than the price of alternative fuels. The lowest production cost level, obtainable by the developed methods is 46 FIM/MWh
-
Energy Technology Data Exchange (ETDEWEB)
Gustavsson, Leif [Ecotechnology, Department of Engineering and Sustainable Development, Mid Sweden University, 83125 Oestersund (Sweden); Linnaeus University, 35195 Vaexjoe (Sweden); Eriksson, Lisa; Sathre, Roger [Ecotechnology, Department of Engineering and Sustainable Development, Mid Sweden University, 83125 Oestersund (Sweden)
2011-01-15
There are many possible systems for recovering, refining, and transporting logging residues for use as fuel. Here we analyse costs, primary energy and CO{sub 2} benefits of various systems for using logging residues locally, nationally or internationally. The recovery systems we consider are a bundle system and a traditional chip system in a Nordic context. We also consider various transport modes and distances, refining the residues into pellets, and replacing different fossil fuels. Compressing of bundles entails costs, but the cost of chipping is greatly reduced if chipping is done on a large scale, providing an overall cost-effective system. The bundle system entails greater primary energy use, but its lower dry-matter losses mean that more biomass per hectare can be extracted from the harvest site. Thus, the potential replacement of fossil fuels per hectare of harvest area is greater with the bundle system than with the chip system. The fuel-cycle reduction of CO{sub 2} emissions per harvest area when logging residues replace fossil fuels depends more on the type of fossil fuel replaced, the logging residues recovery system used and the refining of the residues, than on whether the residues are transported to local, national or international end-users. The mode and distance of the transport system has a minor impact on the CO{sub 2} emission balance. (author)
-
Degli Esposti, Luca; Favalli, Ennio Giulio; Sangiorgi, Diego; Di Turi, Roberta; Farina, Giuseppina; Gambera, Marco; Ravasio, Roberto
2017-01-01
The aim of this analysis was to provide an estimate of drug utilization indicators (persistence, switch rate and drug consumption) on biologics and the corresponding costs (drugs, admissions and specialist care) incurred by the Italian National Health Service in the management of adult patients with rheumatoid arthritis (RA). We conducted an observational retrospective cohort analysis using the administrative databases of three local health units. We considered all patients aged ≥18 years with a diagnosis of RA and at least one biologic drug prescription between January 2010 and December 2012 (recruitment period). Persistence was defined as maintenance over the last 3 months of the follow-up period of the same biological therapy administered at the index date. A switch was defined as the presence of a biological therapy other than that administered at the index date during the last 3 months of the follow-up period. Hospital admissions (with a diagnosis of RA or other RA-related diagnoses), specialist outpatient services, instrumental diagnostics and pharmaceutical consumption were assessed. The drug utilization analysis took into account only biologics with at least 90 patients on treatment at baseline (adalimumab n=144, etanercept n=236 and infliximab n=94). In each year, etanercept showed better persistence with initial treatment than adalimumab or infliximab. Etanercept was characterized by the lowest number of patients increasing the initial drug consumption (2.6%) and by the highest number of patients reducing the initial drug consumption (10.5%). The mean cost of treatment for a patient persisting with the initial treatment was €12,388 (€14,182 for adalimumab, €12,103 for etanercept and €11,002 for infliximab). The treatment costs for patients switching from initial treatment during the first year of follow-up were higher than for patients who did not switch (€12,710 vs. €11,332). Persistence, switch rate and drug consumption seem to directly
-
A new double sided linear switched reluctance motor with low cost
International Nuclear Information System (INIS)
Daldaban, Ferhat; Ustkoyuncu, Nurettin
2006-01-01
This paper presents the realization and design of a new linear switched reluctance motor (LSRM) structure. The new model has double sided configuration and provides high force for many applications with low cost. The characteristics of the LSRM are obtained by using finite element analysis (FEA) and analytical calculations. The results of the FEA and analytical calculations are presented, and compared with experimental results. A high correlation between experimental and analytical results is obtained, which has been demonstrated in the form of inductance versus position versus current
-
Corrosion failure due to flux residues in an electronic add-on device
DEFF Research Database (Denmark)
Jellesen, Morten Stendahl; Minzari, Daniel; Rathinavelu, Umadevi
2010-01-01
of the electrochemical behavior metallic materials (alloys) used in the switch and risk of electrochemical migration (ECM) between the switch components in presence of flux residues was also carried out. Investigations included potentiodynamic polarization measurements on the switch electrodes using a micro......-electrochemical technique, in situ ECM studies, and scanning electron microscopy (SEM). Failure of the switches was found to be either due to the flux residue acting as an nsulating layer or as a corrosion accelerator causing ECM....
-
Navarro, Ana; Saldaña, María T; Pérez, Concepción; Masramón, Xavier; Rejas, Javier
2012-06-01
To analyze the changes in pain severity and associated costs resulting from resource utilization and reduced productivity in patients with gabapentin-refractory peripheral neuropathic pain who switched to pregabalin therapy in primary care settings in Spain. This is a post hoc analysis of a 12-week, multicentre, noninterventional cost-of-illness study. Patients were included in the study if they were over 18 years of age and had a diagnosis of chronic, treatment-refractory peripheral neuropathic pain. The analysis included all pregabalin-naïve patients who had previously shown an inadequate response to gabapentin and switched to pregabalin. Severity of pain before and after treatment with pregabalin, alone or as an add-on therapy, was assessed using the Short-Form McGill Pain Questionnaire (SF-MPQ) and its related visual analogue scale (VA). Healthcare resource utilization, productivity (including lost-workday equivalents [LWDE]), and related costs were assessed at baseline and after pregabalin treatment. A total of 174 patients switched to pregabalin had significant and clinically relevant reductions in pain severity (mean [SD] change on SF-MPQ VA scale, -31.9 [22.1]; P use [in pregabalin add-on group], ancillary tests, and unscheduled medical visits) were observed at the end of trial. Additionally, there were substantial improvements in productivity, including a reduction in the number of LWDE following pregabalin treatment (-18.9 [26.0]; P < 0.0001). These changes correlated with substantial reductions in both direct (-652.9 ± 1622.4 €; P < 0.0001) and indirect healthcare costs (-851.6 [1259.6] €; P < 0.0001). The cost of care in patients with gabapentin-refractory peripheral neuropathic pain appeared to be significantly reduced after switching to pregabalin treatment, alone or in combination with other analgesic drugs, in a real-life setting. © 2011 The Authors. Pain Practice © 2011 World Institute of Pain.
-
Directory of Open Access Journals (Sweden)
Khaled Sadek
2009-10-01
Full Text Available In this paper, the reliability of capacitive shunt RF MEMS switches have been investigated using three dimensional (3D coupled multiphysics finite element (FE analysis. The coupled field analysis involved three consecutive multiphysics interactions. The first interaction is characterized as a two-way sequential electromagnetic (EM-thermal field coupling. The second interaction represented a one-way sequential thermal-structural field coupling. The third interaction portrayed a two-way sequential structural-electrostatic field coupling. An automated substructuring algorithm was utilized to reduce the computational cost of the complicated coupled multiphysics FE analysis. The results of the substructured FE model with coupled field analysis is shown to be in good agreement with the outcome of previously published experimental and numerical studies. The current numerical results indicate that the pull-in voltage and the buckling temperature of the RF switch are functions of the microfabrication residual stress state, the switch operational frequency and the surrounding packaging temperature. Furthermore, the current results point out that by introducing proper mechanical approaches such as corrugated switches and through-holes in the switch membrane, it is possible to achieve reliable pull-in voltages, at various operating temperatures. The performed analysis also shows that by controlling the mean and gradient residual stresses, generated during microfabrication, in conjunction with the proposed mechanical approaches, the power handling capability of RF MEMS switches can be increased, at a wide range of operational frequencies. These design features of RF MEMS switches are of particular importance in applications where a high RF power (frequencies above 10 GHz and large temperature variations are expected, such as in satellites and airplane condition monitoring.
-
Wang, Hsiu-Ling; Huang, Jun-Ying; Howng, Shen-Long
2011-02-01
The reimbursement system changed from fee-for-service to fixed prospective payments in Taiwan, the effect on the physician-patient's relationship is worth being studied. We examined the relationship between patient visit experience, cost perceptions and the two important aspects of quality of care, curing and interpersonal performance, and patients' loyalty to the hospital physicians. A total of 404 patients from an acute care hospital in Taiwan, Kaohsiung Medical University Hospital (KMUH), were investigated using a self-administered mailing survey. All measures including patient loyalty (PL), curing service quality (CSQ), interpersonal service quality (ISQ), visit experience (VE) and perceived switching costs (PSC), were adapted and modified from existing scales. Our results showed that the physician's CSQ and ISQ positively affected patients' loyalty to KMUH. The interaction between the main effects of service quality, patients' VE and three types of switching visit costs, yielded additional insights into the importance of service quality for patient retention. The CSQ of physicians becomes a more important determinant of loyalty than ISQ as patients' VE increases. The importance of CSQ and ISQ increases in relation to PL as the perceived procedural and relational costs of changing care providers increases. Neither CSQ nor ISQ has a reduced relationship with PL as the perceived financial costs of switching hospitals increase. Our study indicates that the impact of CSQ and ISQ on loyalty varies according to the perceived visit costs of changing hospitals and the patients' VE.
-
When Language Switching has No Apparent Cost: Lexical Access in Sentence Context
Gullifer, Jason W.; Kroll, Judith F.; Dussias, Paola E.
2013-01-01
We report two experiments that investigate the effects of sentence context on bilingual lexical access in Spanish and English. Highly proficient Spanish-English bilinguals read sentences in Spanish and English that included a marked word to be named. The word was either a cognate with similar orthography and/or phonology in the two languages, or a matched non-cognate control. Sentences appeared in one language alone (i.e., Spanish or English) and target words were not predictable on the basis of the preceding semantic context. In Experiment 1, we mixed the language of the sentence within a block such that sentences appeared in an alternating run in Spanish or in English. These conditions partly resemble normally occurring inter-sentential code-switching. In these mixed-language sequences, cognates were named faster than non-cognates in both languages. There were no effects of switching the language of the sentence. In Experiment 2, with Spanish-English bilinguals matched closely to those who participated in the first experiment, we blocked the language of the sentences to encourage language-specific processes. The results were virtually identical to those of the mixed-language experiment. In both cases, target cognates were named faster than non-cognates, and the magnitude of the effect did not change according to the broader context. Taken together, the results support the predictions of the Bilingual Interactive Activation + Model (Dijkstra and van Heuven, 2002) in demonstrating that bilingual lexical access is language non-selective even under conditions in which language-specific cues should enable selective processing. They also demonstrate that, in contrast to lexical switching from one language to the other, inter-sentential code-switching of the sort in which bilinguals frequently engage, imposes no significant costs to lexical processing. PMID:23750141
-
When language switching has no apparent cost: Lexical access in sentence context
Directory of Open Access Journals (Sweden)
Jason W. Gullifer
2013-05-01
Full Text Available We report two experiments that investigate the effects of sentence context on bilingual lexical access in Spanish and English. Highly proficient Spanish-English bilinguals read sentences in Spanish and English that included a marked word to be named. The word was either a cognate with similar orthography and/or phonology in the two languages, or a matched non-cognate control. Sentences appeared in one language alone (i.e., Spanish or English and target words were not predictable on the basis of the preceding semantic context. In Experiment 1, we mixed the language of the sentence within a block such that sentences appeared in an alternating run in Spanish or in English. These conditions partly resemble normally occurring inter-sentential code-switching. In these mixed language sequences, cognates were named faster than non-cognates in both languages. There were no effects of switching the language of the sentence. In Experiment 2, with Spanish-English bilinguals matched closely to those who participated in the first experiment, we blocked the language of the sentences to encourage language-specific processes. The results were virtually identical to those of the mixed language experiment. In both cases, target cognates were named faster than non-cognates, and the magnitude of the effect did not change according to the broader context. Taken together, the results support the predictions of the Bilingual Interactive Activation + Model (Dijkstra & Van Heuven, 2002 in demonstrating that bilingual lexical access is language nonselective even under conditions in which language-specific cues should enable selective processing. They also demonstrate that, in contrast to lexical switching from one language to the other, inter-sentential code-switching of the sort in which bilinguals frequently engage, imposes no significant costs to lexical processing.
-
Elements of magnetic switching
International Nuclear Information System (INIS)
Aaland, K.
1983-01-01
This chapter describes magnetic switching as a method of connecting a capacitor bank (source) to a load; reviews several successful applications of magnetic switching, and discusses switching transformers, limitations and future possibilities. Some of the inflexibility and especially the high cost of magnetic materials may be overcome with the availability of the new splash cooled ribbons (Metglas). Experience has shown that magnetics works despite shock, radiation or noise interferences
-
Directory of Open Access Journals (Sweden)
W. Michael Griffin
2014-02-01
Full Text Available Fossil fuels comprise 93% of Malaysia’s electricity generation and account for 36% of the country’s 2010 Greenhouse Gas (GHG emissions. The government has targeted the installation of 330 MW of biomass electricity generation capacity by 2015 to avoid 1.3 Mt of CO2 emissions annually and offset some emissions due to increased coal use. One biomass option is to co-fire with coal, which can result in reduced GHG emissions, coal use, and costs of electricity. A linear optimization cost model was developed using seven types of biomass residues for Peninsular Malaysia. Results suggest that about 12 Mt/year of residues are available annually, of which oil-palm residues contribute 77%, and rice and logging residues comprise 17%. While minimizing the cost of biomass and biomass residue transport, co-firing at four existing coal plants in Peninsular Malaysia could meet the 330 MW biomass electricity target and reduce costs by about $24 million per year compared to coal use alone and reduces GHG emissions by 1.9 Mt of CO2. Maximizing emissions reduction for biomass co-firing results in 17 Mt of CO2 reductions at a cost of $23/t of CO2 reduced.
-
Directory of Open Access Journals (Sweden)
Farzana Quoquab
2016-02-01
Full Text Available The objective of this study is to examine the effects of consumer innovativeness, service quality, service switching costs and service satisfaction on service loyalty among mobile phone service users. A cross sectional survey was employed which yielded 535 responses. Structural equation modelling using the AMOS version 2.0 was utilized to test study the hypotheses. Test results reveal that service satisfaction, service switching costs and service quality are the three antecedents that directly influence service loyalty. However, consumer innovativeness does not have any direct effect on service loyalty. Moreover, service satisfaction is found to be a partial mediator between ‘service quality’ and ‘service loyalty’. Findings from this study will develop insights to enable policy-makers, managers and marketers to better strategize and effectively implement loyalty programs and prevent their customers from switching. This will enhance value creation for both their users and for the industry.
-
O'Brien, Lisa; Shaffer, Nathan; Sangrujee, Nalinee; Abimbola, Taiwo O
2014-03-01
To estimate the incremental cost over 5 years of a policy switch from the Option B to the Option B+ protocol for the prevention of mother-to-child transmission (PMTCT) of the human immunodeficiency virus (HIV). Data from cost studies and other published sources were used to determine the cost, per woman and per cohort (1000 breastfeeding and 1000 non-breastfeeding women), of switching from Option B (maternal triple antiretroviral [ARV] regimen during pregnancy and breastfeeding plus daily nevirapine for the infant for 6 weeks) to Option B+ (maternal triple ARV regimen initiated during pregnancy and continued for life). The variables used to model the different scenarios were maternal CD4+ T lymphocyte (CD4+ cell) count (350-500 versus > 500 cells/µl), rate of decline in CD4+ cells (average, rapid, slow), breastfeeding status (yes, no) and breastfeeding duration (12, 18 or 24 months). For women with CD4+ cell counts of 350-500 cells/µl, the incremental cost per 1000 women was 157,345 United States dollars (US$) for breastfeeding women and US$ 92,813 for non-breastfeeding women. For women with CD4+ cell counts > 500 cells/µl, the incremental cost per 1000 women ranged from US$ 363,443 to US$ 484,591 for breastfeeding women and was US$ 605,739 for non-breastfeeding women. From a cost perspective, a policy switch from Option B to Option B+ is feasible in PMTCT programme settings where resources are currently being allocated to Option B.
-
Directory of Open Access Journals (Sweden)
Laura Steenbergen
2017-10-01
Full Text Available The prevalence of weight problems is increasing worldwide. There is growing evidence that high body mass index (BMI is associated with frontal lobe dysfunction and deficits in cognitive control. The present study aims to clarify the association between weight status and the degree of impairment in cognitive flexibility, i.e., the ability to efficiently switch from one task to another, by disentangling the preparatory and residual domains of task switching. Twenty-six normal weight (BMI < 25, five males and twenty-six overweight (BMI ≥ 25, seven males university students performed a task-switching paradigm that provides a relatively well-established diagnostic measure of proactive vs. reactive control with regard to cognitive flexibility. Compared to individuals with a BMI lower than 25, overweight (i.e., ≥25 was associated with increased switching costs in the reactive switching condition (i.e., when preparation time is short, representing reduced cognitive flexibility in the preparatory domain. In addition, the overweight group reported significantly more depression and binge eating symptoms, although still indicating minimal depression. No between-group differences were found with regard to self-reported autism spectrum symptoms, impulsiveness, state- and trait anxiety, and cognitive reactivity to depression. The present findings are consistent with and extend previous literature showing that elevated BMI in young, otherwise healthy individuals is associated with significantly more switching costs due to inefficiency in the retrieval, implementation, and maintenance of task sets, indicating less efficient cognitive control functioning.
-
The Optimal Pricing of Computer Software and Other Products with High Switching Costs
Pekka Ahtiala
2004-01-01
The paper studies the determinants of the optimum prices of computer programs and their upgrades. It is based on the notion that because of the human capital invested in the use of a computer program by its user, this product has high switching costs, and on the finding that pirates are responsible for generating over 80 per cent of new software sales. A model to maximize the present value of the program to the program house is constructed to determine the optimal prices of initial programs a...
-
Directory of Open Access Journals (Sweden)
Degli Esposti L
2016-12-01
Full Text Available Luca Degli Esposti,1 Ennio Giulio Favalli,2 Diego Sangiorgi,1 Roberta Di Turi,3 Giuseppina Farina,4 Marco Gambera,5 Roberto Ravasio,6 1CliCon S.r.l. – Health, Economics & Outcomes Research, Ravenna, 2Department of Rheumatology, Istituto Ortopedico Gaetano Pini, Milan, 3Local Pharmaceutical and Supplementary Assistance Unit, Roma Local Health Authority D, Rome, 4Internal Management Control Unit – Pharmaceutical Spending Control Sector, Caserta Local Health Authority, Caserta, 5Local Pharmaceutical Service, Bergamo Local Health Authority, Bergamo, 6Health Publishing & Services Srl, Milan, Italy Objectives: The aim of this analysis was to provide an estimate of drug utilization indicators (persistence, switch rate and drug consumption on biologics and the corresponding costs (drugs, admissions and specialist care incurred by the Italian National Health Service in the management of adult patients with rheumatoid arthritis (RA.Methods: We conducted an observational retrospective cohort analysis using the administrative databases of three local health units. We considered all patients aged ≥18 years with a diagnosis of RA and at least one biologic drug prescription between January 2010 and December 2012 (recruitment period. Persistence was defined as maintenance over the last 3 months of the follow-up period of the same biological therapy administered at the index date. A switch was defined as the presence of a biological therapy other than that administered at the index date during the last 3 months of the follow-up period. Hospital admissions (with a diagnosis of RA or other RA-related diagnoses, specialist outpatient services, instrumental diagnostics and pharmaceutical consumption were assessed.Results: The drug utilization analysis took into account only biologics with at least 90 patients on treatment at baseline (adalimumab n=144, etanercept n=236 and infliximab n=94. In each year, etanercept showed better persistence with initial
-
Control of delay dominant systems with costs related to switching
DEFF Research Database (Denmark)
Deng, Honglian; Larsen, Lars Finn Sloth; Stoustrup, Jakob
2010-01-01
The objective of this paper is to extend a novel low complexity method for optimizing switch control developed by the authors earlier to work with delay dominant systems and demonstrate that the method works in practice with a refrigeration test system. The extended method solves switching problems...... controller with fixed bounds shows that the optimizing switch control outperforms the baseline....
-
Manufacture of Radio Frequency Micromachined Switches with Annealing
Directory of Open Access Journals (Sweden)
Cheng-Yang Lin
2014-01-01
Full Text Available The fabrication and characterization of a radio frequency (RF micromachined switch with annealing were presented. The structure of the RF switch consists of a membrane, coplanar waveguide (CPW lines, and eight springs. The RF switch is manufactured using the complementary metal oxide semiconductor (CMOS process. The switch requires a post-process to release the membrane and springs. The post-process uses a wet etching to remove the sacrificial silicon dioxide layer, and to obtain the suspended structures of the switch. In order to improve the residual stress of the switch, an annealing process is applied to the switch, and the membrane obtains an excellent flatness. The finite element method (FEM software CoventorWare is utilized to simulate the stress and displacement of the RF switch. Experimental results show that the RF switch has an insertion loss of 0.9 dB at 35 GHz and an isolation of 21 dB at 39 GHz. The actuation voltage of the switch is 14 V.
-
Manufacture of radio frequency micromachined switches with annealing.
Lin, Cheng-Yang; Dai, Ching-Liang
2014-01-17
The fabrication and characterization of a radio frequency (RF) micromachined switch with annealing were presented. The structure of the RF switch consists of a membrane, coplanar waveguide (CPW) lines, and eight springs. The RF switch is manufactured using the complementary metal oxide semiconductor (CMOS) process. The switch requires a post-process to release the membrane and springs. The post-process uses a wet etching to remove the sacrificial silicon dioxide layer, and to obtain the suspended structures of the switch. In order to improve the residual stress of the switch, an annealing process is applied to the switch, and the membrane obtains an excellent flatness. The finite element method (FEM) software CoventorWare is utilized to simulate the stress and displacement of the RF switch. Experimental results show that the RF switch has an insertion loss of 0.9 dB at 35 GHz and an isolation of 21 dB at 39 GHz. The actuation voltage of the switch is 14 V.
-
Farb, Joshua N; Morrical, Scott W
2009-01-16
Recombinases of the highly conserved RecA/Rad51 family play central roles in homologous recombination and DNA double-stranded break repair. RecA/Rad51 enzymes form presynaptic filaments on single-stranded DNA (ssDNA) that are allosterically activated to catalyze ATPase and DNA strand-exchange reactions. Information is conveyed between DNA- and ATP-binding sites, in part, by a highly conserved glutamine residue (Gln194 in Escherichia coli RecA) that acts as an allosteric switch. The T4 UvsX protein is a divergent RecA ortholog and contains histidine (His195) in place of glutamine at the allosteric switch position. UvsX and RecA catalyze similar strand-exchange reactions, but differ in other properties. UvsX produces both ADP and AMP as products of its ssDNA-dependent ATPase activity--a property that is unique among characterized recombinases. Details of the kinetics of ssDNA-dependent ATP hydrolysis reactions indicate that UvsX-ssDNA presynaptic filaments are asymmetric and contain two classes of ATPase active sites: one that generates ADP, and another that generates AMP. Active-site asymmetry is reduced by mutations at the His195 position, since UvsX-H195Q and UvsX-H195A mutants both exhibit stronger ssDNA-dependent ATPase activity, with lower cooperativity and markedly higher ADP/AMP product ratios, than wild-type UvsX. Reduced active-site asymmetry correlates strongly with reduced ssDNA-binding affinity and DNA strand-exchange activity in both H195Q and H195A mutants. These and other results support a model in which allosteric switch residue His195 controls the formation of an asymmetric conformation of UvsX-ssDNA filaments that is active in DNA strand exchange. The implications of our findings for UvsX recombination functions, and for RecA functions in general, are discussed.
-
Oosterwijk, Suzanne; Winkielman, Piotr; Pecher, Diane; Zeelenberg, René; Rotteveel, Mark; Fischer, Agneta H
2012-01-01
Mental states-such as thinking, remembering, or feeling angry, happy, or dizzy-have a clear internal component. We feel a certain way when we are in these states. These internal experiences may be simulated when people understand conceptual references to mental states. However, mental states can also be described from an "external" perspective, for example when referring to "smiling." In those cases, simulation of visible outside features may be more relevant for understanding. In a switching costs paradigm, we presented semantically unrelated sentences describing emotional and nonemotional mental states while manipulating their internal or external focus. The results show that switching costs occur when participants shift between sentences with an internal and an external focus. This suggests that different forms of simulation underlie understanding these sentences. In addition, these effects occurred for emotional and nonemotional mental states, suggesting that they are grounded in a similar way-through the process of simulation.
-
Woodam Chung; Dongyeob Kim; Nathaniel Anderson
2012-01-01
Forest and mill residues are a promising source of biomass feedstock for the production of bioenergy, biofuels and bioproducts. However, high costs of transportation and handling of feedstock often make utilization of forest residues, such as logging slash, financially unviable. As a result, these materials are often considered waste and left on site to decompose or...
-
Whelan, Michelle; Kinsella, Brian; Furey, Ambrose; Moloney, Mary; Cantwell, Helen; Lehotay, Steven J; Danaher, Martin
2010-07-02
A new UHPLC-MS/MS (ultra high performance liquid chromatography coupled to tandem mass spectrometry) method was developed and validated to detect 38 anthelmintic drug residues, consisting of benzimidazoles, avermectins and flukicides. A modified QuEChERS-type extraction method was developed with an added concentration step to detect most of the analytes at keeper to ensure analytes remain in solution. Using rapid polarity switching in electrospray ionisation, a single injection was capable of detecting both positively and negatively charged ions in a 13 min run time. The method was validated at two levels: the unapproved use level and at the maximum residue level (MRL) according to Commission Decision (CD) 2002/657/EC criteria. The decision limit (CCalpha) of the method was in the range of 0.14-1.9 and 11-123 microg kg(-1) for drugs validated at unapproved and MRL levels, respectively. The performance of the method was successfully verified for benzimidazoles and levamisole by participating in a proficiency study.
-
Directory of Open Access Journals (Sweden)
Marco eCalabria
2012-01-01
Full Text Available Previous research has shown that highly-proficient bilinguals have comparable switch costs in both directions when they switch between languages (L1 and L2, the so called ‘symmetrical switch cost’ effect. Interestingly, the same symmetry is also present when they switch between L1 and a much weaker L3. These findings suggest that highly proficient bilinguals develop a language control system that seems to be insensitive to language proficiency. In the present study, we explore whether the pattern of symmetrical switch costs in language switching tasks generalizes to a non-linguistic switching task in the same group of highly-proficient bilinguals. The end goal of this is to assess whether bilingual language control (bLC can be considered as subsidiary to domain-general executive control (EC. We tested highly-proficient Catalan-Spanish bilinguals both in a linguistic switching task and in a non-linguistic switching task. In the linguistic task, participants named pictures in L1 and L2 (Experiment 1 or L3 (Experiment 2 depending on a cue presented with the picture (a flag. In the non-linguistic task, the same participants had to switch between two card sorting rule-sets (colour and shape. Overall, participants showed symmetrical switch costs in the linguistic switching task, but not in the non-linguistic switching task. In a further analysis, we observed that in the linguistic switching task the asymmetry of the switch costs changed across blocks, while in the non-linguistic switching task an asymmetrical switch cost was observed throughout the task. The observation of different patterns of switch costs in the linguistic and the non-linguistic switching tasks suggest that the bLC system is not completely subsidiary to the domain-general EC system.
-
Seibold, Julia C; Nolden, Sophie; Oberem, Josefa; Fels, Janina; Koch, Iring
2018-06-01
In an auditory attention-switching paradigm, participants heard two simultaneously spoken number-words, each presented to one ear, and decided whether the target number was smaller or larger than 5 by pressing a left or right key. An instructional cue in each trial indicated which feature had to be used to identify the target number (e.g., female voice). Auditory attention-switch costs were found when this feature changed compared to when it repeated in two consecutive trials. Earlier studies employing this paradigm showed mixed results when they examined whether such cued auditory attention-switches can be prepared actively during the cue-stimulus interval. This study systematically assessed which preconditions are necessary for the advance preparation of auditory attention-switches. Three experiments were conducted that controlled for cue-repetition benefits, modality switches between cue and stimuli, as well as for predictability of the switch-sequence. Only in the third experiment, in which predictability for an attention-switch was maximal due to a pre-instructed switch-sequence and predictable stimulus onsets, active switch-specific preparation was found. These results suggest that the cognitive system can prepare auditory attention-switches, and this preparation seems to be triggered primarily by the memorised switching-sequence and valid expectations about the time of target onset.
-
The Effects Of Customer Satisfaction and Switching Costs On Customer Lo yalty In Health Care
Abidin Pişgin; İrfan Ateşoğlu
2015-01-01
In recent years, the increasing number of private hospitals and the change in service quality and service requirements offered to patients in our country has led to an increase in competition for patients. Becauseof higher competition in healtcare sector, hospitals change their approach and focus more first on retention and then new patient acquisition. As a result, the relationship between satisfaction, trust, loyalty and switching costs as well as factors that af...
-
Caffeine improves anticipatory processes in task switching
Tieges, Zoe; Snel, Jan; Kok, Albert; Wijnen, Jasper G.; Lorist, Monicque M.; Ridderinkhof, K. Richard
We studied the effects of moderate amounts of caffeine on task switching and task maintenance using mixed-task (AABB) blocks, in which participants alternated predictably between two tasks, and single-task (AAAA, BBBB) blocks. Switch costs refer to longer reaction times (RT) on task switch trials
-
Nathaniel Anderson; Woodam Chung; Dan Loeffler; John Greg Jones
2012-01-01
Forest operations generate large quantities of forest biomass residues that can be used for production of bioenergy and bioproducts. However, a significant portion of recoverable residues are inaccessible to large chip vans, making use financially infeasible. New production systems must be developed to increase productivity and reduce costs to facilitate use of these...
-
Cognate costs in bilingual speech production: Evidence from language switching
Directory of Open Access Journals (Sweden)
Mirjam Broersma
2016-09-01
Full Text Available This study investigates cross-language lexical competition in the bilingual mental lexicon. It provides evidence for the occurrence of inhibition as well as the commonly reported facilitation during the production of cognates (words with similar phonological form and meaning in two languages in a mixed picture naming task by highly proficient Welsh-English bilinguals. Previous studies have typically found cognate facilitation. It has previously been proposed (with respect to non-cognates that cross-language inhibition is limited to low-proficient bilinguals; therefore, we tested highly proficient, early bilinguals. In a mixed naming experiment (i.e., picture naming with language switching, 48 highly proficient, early Welsh-English bilinguals named pictures in Welsh and English, including cognate and non-cognate targets. Participants were English-dominant, Welsh-dominant, or had equal language dominance. The results showed evidence for cognate inhibition in to ways. First, both facilitation and inhibition were found on the cognate trials themselves, compared to non-cognate controls, modulated by the participants’ language dominance. The English-dominant group showed cognate inhibition when naming in Welsh (and no difference between cognates and controls when naming in English, and the Welsh-dominant and equal dominance groups generally showed cognate facilitation. Second, cognate inhibition was found as a behavioral adaptation effect, with slower naming for non-cognate filler words in trials after cognates than after non-cognate controls. This effect was consistent across all language dominance groups and both target languages, suggesting that cognate production involved cognitive control even if this was not measurable in the cognate trials themselves. Finally, the results replicated patterns of symmetrical switch costs, as commonly reported for balanced bilinguals. We propose that cognate processing might be affected by two different
-
Functional brain and age-related changes associated with congruency in task switching
Eich, Teal S.; Parker, David; Liu, Dan; Oh, Hwamee; Razlighi, Qolamreza; Gazes, Yunglin; Habeck, Christian; Stern, Yaakov
2016-01-01
Alternating between completing two simple tasks, as opposed to completing only one task, has been shown to produce costs to performance and changes to neural patterns of activity, effects which are augmented in old age. Cognitive conflict may arise from factors other than switching tasks, however. Sensorimotor congruency (whether stimulus-response mappings are the same or different for the two tasks) has been shown to behaviorally moderate switch costs in older, but not younger adults. In the current study, we used fMRI to investigate the neurobiological mechanisms of response-conflict congruency effects within a task switching paradigm in older (N=75) and younger (N=62) adults. Behaviorally, incongruency moderated age-related differences in switch costs. Neurally, switch costs were associated with greater activation in the dorsal attention network for older relative to younger adults. We also found that older adults recruited an additional set of brain areas in the ventral attention network to a greater extent than did younger adults to resolve congruency-related response-conflict. These results suggest both a network and an age-based dissociation between congruency and switch costs in task switching. PMID:27520472
-
Modeling switching behaviour of direct selling customers
Directory of Open Access Journals (Sweden)
P Msweli-Mbanga
2004-04-01
Full Text Available The direct selling industry suffers a high turnover rate of salespeople, resulting in high costs of training new salespeople. Further costs are incurred when broken relationships with customers cause them to switch from one product supplier to another. This study identifies twelve factors that drive the switching behaviour of direct sales customers and examines the extent to which these factors influence switching. Exploratory factor analysis was used to assess the validity of these factors. The factors were represented in a model that posits that an interpersonal relationship between a direct sales person and a customer moderates the relationship between switching behaviour and loyalty. Structural equation modeling was used to test the proposed model. The author then discusses the empirical findings and their managerial implications, providing further avenues for research.
-
Shaffer, Nathan; Sangrujee, Nalinee; Abimbola, Taiwo O
2014-01-01
Abstract Objective To estimate the incremental cost over 5 years of a policy switch from the Option B to the Option B+ protocol for the prevention of mother-to-child transmission (PMTCT) of the human immunodeficiency virus (HIV). Methods Data from cost studies and other published sources were used to determine the cost, per woman and per cohort (1000 breastfeeding and 1000 non-breastfeeding women), of switching from Option B (maternal triple antiretroviral [ARV] regimen during pregnancy and breastfeeding plus daily nevirapine for the infant for 6 weeks) to Option B+ (maternal triple ARV regimen initiated during pregnancy and continued for life). The variables used to model the different scenarios were maternal CD4+ T lymphocyte (CD4+ cell) count (350–500 versus > 500 cells/µl), rate of decline in CD4+ cells (average, rapid, slow), breastfeeding status (yes, no) and breastfeeding duration (12, 18 or 24 months). Findings For women with CD4+ cell counts of 350–500 cells/µl, the incremental cost per 1000 women was 157 345 United States dollars (US$) for breastfeeding women and US$ 92 813 for non-breastfeeding women. For women with CD4+ cell counts > 500 cells/µl, the incremental cost per 1000 women ranged from US$ 363 443 to US$ 484 591 for breastfeeding women and was US$ 605 739 for non-breastfeeding women. Conclusion From a cost perspective, a policy switch from Option B to Option B+ is feasible in PMTCT programme settings where resources are currently being allocated to Option B. PMID:24700975
-
Commitment and Switching Intentions: Customers and Brands
Directory of Open Access Journals (Sweden)
Juliana Werneck Rodrigues
2012-12-01
Full Text Available This study aims to evaluate the relationship between a customer’s brand switching intentions and his commitment to a brand. Based on a literature review, constructs related to customer brand commitment were identified (affective and continuance commitment, trust, satisfaction, switching costs and alternative attractiveness and their roles in the formation of brand switching intentions hypothesized. Through a cross-sectional survey, a sample of 201 smartphone users was collected to test the proposed relationships. Data analysis was carried out via structural equations modeling, with direct effects of trust, satisfaction, switching costs and alternative attractiveness upon the different kinds of commitment being verified. Furthermore, both types of brand commitment (affective and continuance were found to negatively impact a customer’s intention to switch brands. Regarding enterprise customer strategies, the research findings suggest that, if firms are able to track customer brand commitment, they could use such knowledge to develop better relationship strategies, minimizing customer defection and further developing customer value to the company.
-
Directory of Open Access Journals (Sweden)
Peng Xia
2017-11-01
Full Text Available A facile and low-cost process was developed for fabricating write-once-read-many-times (WORM Cu/Ag NPs/Alumina/Al memory devices, where the alumina passivation layer formed naturally in air at room temperature, whereas the Ag nanoparticle monolayer was in situ prepared through thermal annealing of a 4.5 nm Ag film in air at 150°C. The devices exhibit irreversible transition from initial high resistance (OFF state to low resistance (ON state, with ON/OFF ratio of 107, indicating the introduction of Ag nanoparticle monolayer greatly improves ON/OFF ratio by four orders of magnitude. The uniformity of threshold voltages exhibits a polar-dependent behavior, and a narrow range of threshold voltages of 0.40 V among individual devices was achieved upon the forward voltage. The memory device can be regarded as two switching units connected in series. The uniform alumina interfacial layer and the non-uniform distribution of local electric fields originated from Ag nanoparticles might be responsible for excellent switching uniformity. Since silver ions in active layer can act as fast ion conductor, a plausible mechanism relating to the formation of filaments sequentially among the two switching units connected in series is suggested for the polar-dependent switching behavior. Furthermore, we demonstrate both alumina layer and Ag NPs monolayer play essential roles in improving switching parameters based on comparative experiments.
-
Xia, Peng; Li, Luman; Wang, Pengfei; Gan, Ying; Xu, Wei
2017-11-01
A facile and low-cost process was developed for fabricating write-once-read-many-times (WORM) Cu/Ag NPs/Alumina/Al memory devices, where the alumina passivation layer formed naturally in air at room temperature, whereas the Ag nanoparticle monolayer was in situ prepared through thermal annealing of a 4.5 nm Ag film in air at 150°C. The devices exhibit irreversible transition from initial high resistance (OFF) state to low resistance (ON) state, with ON/OFF ratio of 107, indicating the introduction of Ag nanoparticle monolayer greatly improves ON/OFF ratio by four orders of magnitude. The uniformity of threshold voltages exhibits a polar-dependent behavior, and a narrow range of threshold voltages of 0.40 V among individual devices was achieved upon the forward voltage. The memory device can be regarded as two switching units connected in series. The uniform alumina interfacial layer and the non-uniform distribution of local electric fields originated from Ag nanoparticles might be responsible for excellent switching uniformity. Since silver ions in active layer can act as fast ion conductor, a plausible mechanism relating to the formation of filaments sequentially among the two switching units connected in series is suggested for the polar-dependent switching behavior. Furthermore, we demonstrate both alumina layer and Ag NPs monolayer play essential roles in improving switching parameters based on comparative experiments.
-
DETERMINANT OF DOWNWARD AUDITOR SWITCHING
Directory of Open Access Journals (Sweden)
Totok Budisantoso
2017-12-01
Full Text Available Abstract: Determinant of Downward Auditor Switching. This study examines the factors that influence downward auditor switching in five ASEAN countries. Fixed effect logistic regression was used as analytical method. This study found that opinion shopping occurred in ASEAN, especially in distress companies. Companies with complex businesses will retain the Big Four auditors to reduce complexity and audit costs. Audit and public committees serve as guardians of auditor quality. On the other hand, shareholders failed to maintain audit quality. It indicates that there is entrenchment effect in auditor switching.
-
The Cost of Switching Language in a Semantic Categorization Task.
von Studnitz, Roswitha E.; Green, David W.
2002-01-01
Presents a study in which German-English bilinguals decided whether a visually presented word, either German or English, referred to an animate or to an inanimate entity. Bilinguals were slower to respond on a language switch trial than on language non-switch trials but only if they had to make the same response as on the prior trial. (Author/VWL)
-
Johnson, Quentin R; Lindsay, Richard J; Nellas, Ricky B; Fernandez, Elias J; Shen, Tongye
2015-02-24
Understanding allosteric mechanisms is essential for the physical control of molecular switches and downstream cellular responses. However, it is difficult to decode essential allosteric motions in a high-throughput scheme. A general two-pronged approach to performing automatic data reduction of simulation trajectories is presented here. The first step involves coarse-graining and identifying the most dynamic residue-residue contacts. The second step is performing principal component analysis of these contacts and extracting the large-scale collective motions expressed via these residue-residue contacts. We demonstrated the method using a protein complex of nuclear receptors. Using atomistic modeling and simulation, we examined the protein complex and a set of 18 glycine point mutations of residues that constitute the binding pocket of the ligand effector. The important motions that are responsible for the allostery are reported. In contrast to conventional induced-fit and lock-and-key binding mechanisms, a novel "frustrated-fit" binding mechanism of RXR for allosteric control was revealed.
-
When predictions take control: The effect of task predictions on task switching performance
Directory of Open Access Journals (Sweden)
Wout eDuthoo
2012-08-01
Full Text Available In this paper, we aimed to investigate the role of self-generated predictions in the flexible control of behaviour. Therefore, we ran a task switching experiment in which participants were asked to try to predict the upcoming task in three conditions varying in switch rate (30%, 50% and 70%. Irrespective of their predictions, the colour of the target indicated which task participants had to perform. In line with previous studies (Mayr, 2006; Monsell & Mizon, 2006, the switch cost was attenuated as the switch rate increased. Importantly, a clear task repetition bias was found in all conditions, yet the task repetition prediction rate dropped from 78% over 66% to 49% with increasing switch probability in the three conditions. Irrespective of condition, the switch cost was strongly reduced in expectation of a task alternation compared to the cost of an unexpected task alternation following repetition predictions. Hence, our data suggest that the reduction in the switch cost with increasing switch probability is caused by a diminished expectancy for the task to repeat. Taken together, this paper highlights the importance of predictions in the flexible control of behaviour, and suggests a crucial role for task repetition expectancy in the context-sensitive adjusting of task switching performance.
-
Depigmentation therapy with Q-switched Nd: YAG laser in universal vitiligo
Directory of Open Access Journals (Sweden)
Imran Majid
2013-01-01
Full Text Available Background: Any residual pigment left in patients of universal vitiligo is managed with topical treatments, cryotherapy, and lasers. Aim: The study aims to assess the efficacy and safety of Q-switched Nd: YAG laser in treating the residual pigmentation in patients with universal vitiligo. Materials and Methods: Fifteen patients of universal vitiligo with residual pigmentation on the face, hands, or feet, resistant to topical treatments, were treated with single or multiple sessions of Q-switched Nd: YAG laser treatment. Topical treatments were continued in between the laser sessions and the depigmentation achieved was monitored by clinical examination and repeat digital photographs. Response to the treatment was labelled as excellent if the residual pigment could be reduced by at least 90% while 50-90% resolution of pigmentation was labelled as a partial response. Adverse effects to the treatment offered were also monitored. Results: Thirteen of the 15 patients enrolled for the study showed an excellent response to the treatment offered. Two other patients showed a poor response with less than 50% resolution of pigmentation. The number of laser sessions needed at a particular site ranged from 1 to 3 and no patient was offered more than three sessions of laser treatment at any site. No significant adverse events were reported by any patient. Conclusions: Residual pigmentation in patients with universal vitiligo that does not respond to topical treatment options alone can be managed quite effectively with Q-switched Nd: YAG laser without any significant adverse effects.
-
Switch loop flexibility affects substrate transport of the AcrB efflux pump
International Nuclear Information System (INIS)
Muller, Reinke T.; Travers, Timothy; Cha, Hi-jea; Phillips, Joshua L.
2017-01-01
The functionally important switch-loop of the trimeric multidrug transporter AcrB separates the access and deep drug binding pockets in every protomer. This loop, comprising 11 amino acid residues, has been shown to be crucial for substrate transport, as drugs have to travel past the loop to reach the deep binding pocket and from there are transported outside the cell via the connected AcrA and TolC channels. It contains four symmetrically arranged glycine residues suggesting that flexibility is a key feature for pump activity. Upon combinatorial substitution of these glycine residues to proline, functional and structural asymmetry was observed. Proline substitutions on the PC1 proximal side completely abolished transport and reduced backbone flexibility of the switch loop, which adopted a conformation restricting the pathway towards the deep binding pocket. Here, two phenylalanine residues located adjacent to the substitution sensitive glycine residues play a role in blocking the pathway upon rigidification of the loop, since the removal of the phenyl rings from the rigid loop restores drug transport activity.
-
High voltage disconnect switch position monitoring
Energy Technology Data Exchange (ETDEWEB)
Crampton, S W
1983-08-01
Unreliable position indication on high-voltage (HV) disconnect switches can result in equipment damage worth many times the cost of a disconnect switch. The benefits and limitations of a number of possible methods of reliably monitoring HV disconnect switches are assessed. Several methods of powering active devices at HV are noted. It is concluded that the most reliable way of monitoring switch position at reasonable cost would use a passive hermetically-sealed blade-position sensor located at HV, with a fibre-optic link between HV and ground. Separate sensors would be used for open and closed position indication. For maximum reliability the fibre-optic link would continue into the relay building. A passive magnetically actuated fibre-optic sensor has been built which demonstrates the feasibility of the concept. The sensor monitors blade position relative to the jaws in three dimensions with high resolution. A design for an improved passive magneto-optic sensor has significantly lower optical losses, allowing a single fibre-optic loop and 3 sensors to monitor closure of all phases of a disconnect switch. A similar loop would monitor switch opening. The improved sensor has a solid copper housing to provide greater immunity to fault currents, and to protect it from the environment and from physical damage. Two methods of providing a protected path for fibre-optics passing from HV to ground are proposed, one using a hollow porcelain switch-support insulator and the other using an additional small-diameter polymer insulator with optical fibres imbedded in its fibreglass core. A number of improvements are recommended which can be made to existing switches to increase their reliability. 16 refs., 13 figs., 1 tab.
-
Zhao, Yongli; Ji, Yuefeng; Zhang, Jie; Li, Hui; Xiong, Qianjin; Qiu, Shaofeng
2014-08-01
Ultrahigh throughout capacity requirement is challenging the current optical switching nodes with the fast development of data center networks. Pbit/s level all optical switching networks need to be deployed soon, which will cause the high complexity of node architecture. How to control the future network and node equipment together will become a new problem. An enhanced Software Defined Networking (eSDN) control architecture is proposed in the paper, which consists of Provider NOX (P-NOX) and Node NOX (N-NOX). With the cooperation of P-NOX and N-NOX, the flexible control of the entire network can be achieved. All optical switching network testbed has been experimentally demonstrated with efficient control of enhanced Software Defined Networking (eSDN). Pbit/s level all optical switching nodes in the testbed are implemented based on multi-dimensional switching architecture, i.e. multi-level and multi-planar. Due to the space and cost limitation, each optical switching node is only equipped with four input line boxes and four output line boxes respectively. Experimental results are given to verify the performance of our proposed control and switching architecture.
-
Solid core dipoles and switching power supplies: lower cost light sources?
Benesch, J.; Philip, S.
2015-05-01
As a result of improvements in power semiconductors, moderate frequency switching supplies can now provide the hundreds of amps typically required by accelerators with zero-to-peak noise in the kHz region ~ 0.06% in current or voltage mode. Modeling was undertaken using a finite electromagnetic program to determine if eddy currents induced in the solid steel of CEBAF magnets and small supplemental additions would bring the error fields down to the 5ppm level needed for beam quality. The expected maximum field of the magnet under consideration is 0.85 T and the DC current required to produce that field is used in the calculations. An additional 0.1% current ripple is added to the DC current at discrete frequencies 360 Hz, 720 Hz or 7200 Hz. Over the region of the pole within 0.5% of the central integrated BdL the resulting AC field changes can be reduced to less than 1% of the 0.1% input ripple for all frequencies, and a sixth of that at 7200 Hz. Doubling the current, providing 1.5 T central field, yielded the same fractional reduction in ripple at the beam for the cases checked. A small dipole was measured at 60, 120, 360 and 720 Hz in two conditions and the results compared to the larger model for the latter two frequencies with surprisingly good agreement. For light sources with aluminum vacuum vessels and full energy linac injection, the combination of solid core dipoles and switching power supplies may result in significant cost savings. The work may also be used to guide retrofit of existing machines to reduce the level of ripple in the particle beam path.
-
Li, Jian; Wang, Yan; Yang, Zhuoqing; Ding, Guifu; Zhao, Xiaolin; Wang, Hong
2018-03-01
The MEMS inertial switch is widely used in various industries owing to its advantage of small size, high integration, low power consumption and low costs, especially in the timing of Internet of things, such as toys, handheld devices, accessories and vibration testing. This paper provided a novel inertial switch with a reinforcing rib structure and electrostatic power assist. The designed inertial switch can reduce the complexity of the post-processing circuit and broaden its application prospect. The continuous electrostatic force can extend the contact time of the designed inertia switch before the leakage of electricity ends. The moving electrode with a reinforcing rib structure can effectively restrain the bending of the lower surface of moving electrode caused by residual stress. The array-type fixed electrode can ensure stable contact between the electrodes when the device is sensitive to external shocks. The dynamic displacement-time curve can be simulated by the COMSOL finite element simulation software. The laminated plating process is used to produce the designed inertial switch and the drop hammer acceleration monitoring system is used to test the fabricated device. The results indicate that, compared with the traditional design, the bouncing phenomenon can be prevented and extend the contact time to 336μs.
-
An approach to evaluate switching overvoltages during power system restoration
Directory of Open Access Journals (Sweden)
Sadeghkhani Iman
2012-01-01
Full Text Available Transformer switching is one of the important stages during power system restoration. This switching can cause harmonic overvoltages that might damage some equipment and delay power system restoration. Core saturation on the energisation of a transformer with residual flux is a noticeable factor in harmonic overvoltages. This work uses artificial neural networks (ANN in order to estimate the temporary overvoltages (TOVs due to transformer energisation. In the proposed methodology, the Levenberg-Marquardt method is used to train the multilayer perceptron. The developed ANN is trained with the worst case of switching condition, and tested for typical cases. Simulated results for a partial 39-bus New England test system, show the proposed technique can accurately estimate the peak values and durations of switching overvoltages.
-
International Nuclear Information System (INIS)
Jacobsen, R.; Buysse, J.; Gellynck, X.
2013-01-01
Highlights: ► The goal is to compare collection costs for residual household waste. ► We have clustered all municipalities in order to find mutual comparable pairs. ► Each pair consists of one private and one public operating waste collection program. ► All cases show that private service has lower costs than public service. ► Municipalities were contacted to identify the deeper causes for the waste management program. - Abstract: The rising pressure in terms of cost efficiency on public services pushes governments to transfer part of those services to the private sector. A trend towards more privatizing can be noticed in the collection of municipal household waste. This paper reports the findings of a research project aiming to compare the cost between the service of private and public collection of residual household waste. Multiple case studies of municipalities about the Flemish region of Belgium were conducted. Data concerning the year 2009 were gathered through in-depth interviews in 2010. In total 12 municipalities were investigated, divided into three mutual comparable pairs with a weekly and three mutual comparable pairs with a fortnightly residual waste collection. The results give a rough indication that in all cases the cost of private service is lower than public service in the collection of household waste. Albeit that there is an interest in establishing whether there are differences in the costs and service levels between public and private waste collection services, there are clear difficulties in establishing comparisons that can be made without having to rely on a large number of assumptions and corrections. However, given the cost difference, it remains the responsibility of the municipalities to decide upon the service they offer their citizens, regardless the cost efficiency: public or private.
-
Energy Technology Data Exchange (ETDEWEB)
Jacobsen, R., E-mail: ray.jacobsen@ugent.be [Department of Agricultural Economics, Ghent University, Coupure Links 653, B-9000 Ghent (Belgium); Buysse, J., E-mail: j.buysse@ugent.be [Department of Agricultural Economics, Ghent University, Coupure Links 653, B-9000 Ghent (Belgium); Gellynck, X., E-mail: xavier.gellynck@ugent.be [Department of Agricultural Economics, Ghent University, Coupure Links 653, B-9000 Ghent (Belgium)
2013-01-15
Highlights: Black-Right-Pointing-Pointer The goal is to compare collection costs for residual household waste. Black-Right-Pointing-Pointer We have clustered all municipalities in order to find mutual comparable pairs. Black-Right-Pointing-Pointer Each pair consists of one private and one public operating waste collection program. Black-Right-Pointing-Pointer All cases show that private service has lower costs than public service. Black-Right-Pointing-Pointer Municipalities were contacted to identify the deeper causes for the waste management program. - Abstract: The rising pressure in terms of cost efficiency on public services pushes governments to transfer part of those services to the private sector. A trend towards more privatizing can be noticed in the collection of municipal household waste. This paper reports the findings of a research project aiming to compare the cost between the service of private and public collection of residual household waste. Multiple case studies of municipalities about the Flemish region of Belgium were conducted. Data concerning the year 2009 were gathered through in-depth interviews in 2010. In total 12 municipalities were investigated, divided into three mutual comparable pairs with a weekly and three mutual comparable pairs with a fortnightly residual waste collection. The results give a rough indication that in all cases the cost of private service is lower than public service in the collection of household waste. Albeit that there is an interest in establishing whether there are differences in the costs and service levels between public and private waste collection services, there are clear difficulties in establishing comparisons that can be made without having to rely on a large number of assumptions and corrections. However, given the cost difference, it remains the responsibility of the municipalities to decide upon the service they offer their citizens, regardless the cost efficiency: public or private.
-
The effect of episodic retrieval on inhibition in task switching.
Grange, James A; Kowalczyk, Agnieszka W; O'Loughlin, Rory
2017-08-01
Inhibition in task switching is inferred from n-2 repetition costs: the observation that ABA task switching sequences are responded to slower than CBA sequences. This is thought to reflect the persisting inhibition of Task A, which slows reactivation attempts. Mayr (2002) reported an experiment testing a critical noninhibitory account of this effect, namely episodic retrieval: If the trial parameters for Task A match across an ABA sequence, responses should be facilitated because of priming from episodic retrieval; a cost would occur if trial parameters mismatch. In a rule-switching paradigm, Mayr reported no significant difference in n-2 repetition cost when the trial parameters repeated or switched across an ABA sequence, in clear contrast to the episodic retrieval account. What remains unclear is whether successful episodic retrieval modulates the n-2 repetition cost. Across 3 experiments-including a close replication of Mayr-we find clear evidence of reduced n-2 task repetition costs when episodic retrieval is controlled. We find that the effect of episodic retrieval on the n-2 task repetition cost is increased when the cue-task relationship is made more abstract, suggesting the effect is because of interference in establishing the relevant attentional set. We also demonstrate that the episodic retrieval effect is not influenced by retrieval of low-level, perceptual, elements. Together, the data suggest the n-2 task repetition cost-typically attributable to an inhibitory mechanism-also reflects episodic retrieval effects. (PsycINFO Database Record (c) 2017 APA, all rights reserved).
-
Potential Clinical and Economic Impact of Switching Branded Medications to Generics
Straka, Robert J.; Keohane, Denis J.; Liu, Larry Z.
2017-01-01
Switching branded to generic medications has become a common cost-containment measure. Although this is an important objective for health care systems worldwide, the impact of this practice on patient outcomes needs to be carefully considered. We reviewed the literature summarizing the potential clinical and economic consequences of switching from branded to generic medications on patient outcomes. A literature search of peer-reviewed articles published 2003–2013 using key words of “generic switching” or “substitution” was conducted using PubMed, OvidSP, and ScienceDirect. Of 30 articles identified and reviewed, most were related to the diseases of the central nervous system, especially epilepsy. Based on our review, potential impacts of switching fell into 3 broad categories: patient attitudes and adherence, clinical and safety outcomes, and cost and resource utilization. Although in many cases generics may represent an appropriate alternative to branded products, this may not always be the case. Specifically, several studies suggested that switching may negatively impact medication adherence, whereas other studies found that generic switching was associated with poorer clinical outcomes and more adverse events. In some instances, switching accomplished cost savings but did so at increased total cost of care because of increased physician visits or hospitalizations. Although in many cases generics may represent an appropriate alternative, mandatory generic switching may lead to unintended consequences, especially in certain therapeutic areas. Although further study is warranted, based on our review, it may be medically justifiable for physicians and patients to retain the right to request the branded product in certain cases. PMID:26099048
-
An improved soft switched PWM interleaved boost AC-DC converter
International Nuclear Information System (INIS)
Genc, Naci; Iskender, Ires
2011-01-01
In this paper, an improved soft switched two cell interleaved boost AC/DC converter with high power factor is proposed and investigated. A new auxiliary circuit is designed and added to two cell interleaved boost converter to reduce the switching losses. The proposed auxiliary circuit is implemented using only one auxiliary switch and a minimum number of passive components without an important increase in the cost and complexity of the converter. The main advantage of this auxiliary circuit is that it not only provides zero-voltage-transition (ZVT) for the main switches but also provides soft switching for the auxiliary switch and diodes. Though all semiconductor devices operate under soft switching, they do not have any additional voltage and current stresses. The proposed converter operates successfully in soft switching operation mode for a wide range of input voltage level and the load. In addition, it has advantages such as fewer structure complications, lower cost and ease of control. In the study, the transition modes for describing the behavior of the proposed converter in one switching period are described. A prototype with 600 W output power, 50 kHz/cell switching frequency, input line voltage of 110-220 V rms and an output voltage of 400 V dc has been implemented. Analysis, design and the control circuitry are also presented in the paper.
-
International Nuclear Information System (INIS)
Van Devender, J.P.; Martin, T.H.
Recent experiments indicate that synchronous untriggered multichannel switching in water will permit the development of relatively simple, ultra-low impedance, short pulse, relativistic electron beam (REB) accelerators. These experiments resulted in the delivery of a 1.5 MV, 0.75 MA, 15 ns pulse into a two-ohm line with a current risetime of 2 x 10 14 A/sec. The apparatus consisted of a 3 MV Marx generator and a series of three 112 cm wide strip water lines separated by two edge-plane water-gap switches. The Marx generator charged the first line in less than 400 ns. The first switch then formed five or more channels. The second line was charged in 60 ns and broke down with 10 to 25 channels at a mean field of 1.6 MV/cm. The closure time of each spark channel along both switches was measured with a streak camera and showed low jitter. The resulting fast pulse line construction is simpler and should provide considerable costs savings from previous designs. Multiples of these low impedance lines in parallel can be employed to obtain power levels in the 10 14 W range for REB fusion studies. (U.S.)
-
Residual dust charges in discharge afterglow
International Nuclear Information System (INIS)
Coueedel, L.; Mikikian, M.; Boufendi, L.; Samarian, A. A.
2006-01-01
An on-ground measurement of dust-particle residual charges in the afterglow of a dusty plasma was performed in a rf discharge. An upward thermophoretic force was used to balance the gravitational force. It was found that positively charged, negatively charged, and neutral dust particles coexisted for more than 1 min after the discharge was switched off. The mean residual charge for 200-nm-radius particles was measured. The dust particle mean charge is about -5e at a pressure of 1.2 mbar and about -3e at a pressure of 0.4 mbar
-
A novel micro/nano 1 × 4 mechanical optical switch
Lin, Wu-Lang; Fan, Kuang-Chao; Chiang, Li-Hung; Yang, Yao-Joe; Kuo, Wen-Cheng; Chung, Tien-Tung
2006-07-01
This paper presents the design, fabrication and testing of a novel 1 × 4 mechanical optical switch, whose components are fabricated by precision machining and MEMS technologies. The switch uses two relays as the two actuators whose switching direction is perpendicular to each other by an orthogonal arrangement. We adopt a direct fiber-to-fiber principle that aligns the input fiber directly to four output fibers. This configuration eliminates the use of traditional parts such as collimators, turning mirrors or prisms. In addition, due to the use of a fiber holder, the fiber position errors could be reduced to less than 0.27 µm using the two-stage geometry error reduction principle. We have successfully developed a simple and low-cost switch, which performs like most of the 1 × 4 mechanical optical switches that dominate the optics communications market. The advantages of our switch are a small size (20 × 20 × 25 mm3), low cost, high reliability, and the latching function does not need external force for maintaining the state. The experimental results showed that the insertion losses of the four channels are ch1: 0.68 dB, ch2: 1.49 dB, ch3: 0.71 dB and ch4: 0.97 dB. The switching time is 5 ms, the crosstalk <=80 dB. The reliability tests of the insertion loss after 10 000 cycles in four channels yield ch1: 1.67 dB, ch2: 1.63 dB, ch3: 0.75 dB and ch4: 0.98 dB. The size and the cost of our 1 × 4 mechanical optical switch are only about 1/5-1/10 and 1/10 of the series-connect-type and prism-type switches, respectively.
-
Multi-planed unified switching topologies
Chen, Dong; Heidelberger, Philip; Sugawara, Yutaka
2017-07-04
An apparatus and method for extending the scalability and improving the partitionability of networks that contain all-to-all links for transporting packet traffic from a source endpoint to a destination endpoint with low per-endpoint (per-server) cost and a small number of hops. An all-to-all wiring in the baseline topology is decomposed into smaller all-to-all components in which each smaller all-to-all connection is replaced with star topology by using global switches. Stacking multiple copies of the star topology baseline network creates a multi-planed switching topology for transporting packet traffic. Point-to-point unified stacking method using global switch wiring methods connects multiple planes of a baseline topology by using the global switches to create a large network size with a low number of hops, i.e., low network latency. Grouped unified stacking method increases the scalability (network size) of a stacked topology.
-
Directory of Open Access Journals (Sweden)
Yi Xiu YANG
2011-12-01
Full Text Available This paper presents the concept of RF nano switch matrix cell and the fabrication of RF nano switch. The nano switch matrix cell can be implemented into complex switch matrix for signal routing. RF nano switch is the decision unit for the matrix cell; in this research, it is fabricated on a tri-layer high-resistivity-silicon substrate using surface micromachining approach. Electron beam lithography is introduced to define the pattern and IC compatible deposition process is used to construct the metal layers. Silicon-based nano switch fabricated by IC compatible process can lead to a high potential of system integration to perform a cost effective system-on-a-chip solution. In this paper, simulation results of the designed matrix cell are presented; followed by the details of the nano structure fabrication and fabrication challenges optimizations; finally, measurements of the fabricated nano structure along with analytical discussions are also discussed.
-
Welding induced residual stress evaluation using laser-generated Rayleigh waves
Ye, Chong; Zhou, Yuanlai; Reddy, Vishnu V. B.; Mebane, Aaron; Ume, I. Charles
2018-04-01
Welding induced residual stress could affect the dimensional stability, fatigue life, and chemical resistance of the weld joints. Ultrasonic method serves as an important non-destructive tool for the residual stress evaluation due to its easy implementation, low cost and wide application to different materials. Residual stress would result in the ultrasonic wave velocity variation, which is the so called acoustoelastic effect. In this paper, Laser/EMAT ultrasonic technique was proposed to experimentally study the relative velocity variation ΔV/V of Rayleigh wave, which has the potential to evaluate surface/subsurface longitudinal residual stress developed during the Gas Metal Arc Welding process. Broad band ultrasonic waves were excited by pulsed Q-Switched Nd: YAG laser. An electromagnetic acoustic transducer (EMAT) attached to the welded plates was used to capture the Rayleigh wave signals propagating along the weld seam direction. Different time of flight measurements were conducted by varying the distance between the weld seam and Rayleigh wave propagating path in the range of 0 to 45 mm. The maximum relative velocity difference was found on the weld seam. With the increasing distance away from the weld seam, the relative velocity difference sharply decreased to negative value. With further increase in distance, the relative velocity difference slowly increased and approached zero. The distribution of relative velocity variations indicates that tensile stress appears in the melted zone as it becomes compressive near the heat-affected zone.
-
Column Generation for Transmission Switching of Electricity Networks with Unit Commitment
DEFF Research Database (Denmark)
Villumsen, Jonas Christoffer; Philpott, Andy B.
2011-01-01
This paper presents the problem of finding the minimum cost dispatch and commitment of power generation units in a transmission network with active switching.We use the term active switching to denote the use of switches to optimize network topology in an operational context. We propose a Dantzig...
-
Verhoef, K.M.W.; Roelofs, A.P.A.; Chwilla, D.J.
2009-01-01
How are bilinguals able to switch from one language to another? The prevailing inhibition hypothesis takes larger reaction-time (RT) costs for switching to the first language (L1) than to the second language (L2) as evidence for suppression of the non-target language. Switch cost asymmetries can
-
Assessing the Availability of Wood Residues and Residue Markets in Virginia
Alderman, Delton R. Jr.
1998-01-01
A statewide mail survey of primary and secondary wood product manufacturers was undertaken to quantify the production and consumption of wood residues in Virginia. Two hundred and sixty-six wood product manufacturers responded to the study and they provided information on the production, consumption, markets, income or disposal costs, and disposal methods of wood residues. Hardwood and pine sawmills produce approximately 66 percent of Virginia's wood residues. Virginia's wood product man...
-
A New Topology for UPQC Based on Reduced-Switch-Count Converter
Ajami, Ali; Mahmoudi, Mohsen; Seyfi, Ebrahim; Atashbahar, Farid
2014-01-01
Recently, reduced switch count converter switch numerous advantages such as low cost and weight, small size and high reliability have been introduced to be used in unified power quality conditioner (UPQC). In this paper a novel topologyfor UPQC based on back-to-backB4 converter and its control system are proposed. The conventional UPQC consists of twelve switches while the proposed topology for UPQC has 8 switches. By reducing the number of switches, the price of the whole system and losses a...
-
A New Topology for UPQC Based on Reduced-Switch-Count Converter
Ajami, Ali; Mahmoudi, Mohsen; Seyfi, Ebrahim; Atashbahar, Farid
2015-01-01
Recently, reduced switch count converter switch numerous advantages such as low cost and weight, small size and high reliability have been introduced to be used in unified power quality conditioner (UPQC). In this paper a novel topologyfor UPQC based on back-to-backB4 converter and its control system are proposed. The conventional UPQC consists of twelve switches while the proposed topology for UPQC has 8 switches. By reducing the number of switches, the price of the whole system and losses a...
-
Fast-opening vacuum switches for high-power inductive energy storage
International Nuclear Information System (INIS)
Cooperstein, G.
1988-01-01
The subject of fast-opening vacuum switches for high-power inductive energy storage is emerging as an exciting new area of plasma science research. This opening switch technology, which generally involves the use of plasmas as the switching medium, is key to the development of inductive energy storage techniques for pulsed power which have a number of advantages over conventional capacitive techniques with regard to cost and size. This paper reviews the state of the art in this area with emphasis on applications to inductive storage pulsed power generators. Discussion focuses on fast-opening vacuum switches capable of operating at high power (≥10 12 W). These include plasma erosion opening switches, ion beam opening switches, plasma filled diodes, reflex diodes, plasma flow switches, and other novel vacuum opening switches
-
Shahsavari, Esmaeil; Adetutu, Eric M; Anderson, Peter A; Ball, Andrew S
2013-01-15
Petrogenic hydrocarbons represent the most commonly reported environmental contaminant in industrialised countries. In terms of remediating petrogenic contaminated hydrocarbons, finding sustainable non-invasive technologies represents an important goal. In this study, the effect of 4 types of plant residues on the bioremediation of aliphatic hydrocarbons was investigated in a 90 day greenhouse experiment. The results showed that contaminated soil amended with different plant residues led to statistically significant increases in the utilisation rate of Total Petroleum Hydrocarbon (TPH) relative to control values. The maximum TPH reduction (up to 83% or 6800 mg kg(-1)) occurred in soil mixed with pea straw, compared to a TPH reduction of 57% (4633 mg kg(-1)) in control soil. A positive correlation (0.75) between TPH reduction rate and the population of hydrocarbon-utilising microorganisms was observed; a weaker correlation (0.68) was seen between TPH degradation and bacterial population, confirming that adding plant materials significantly enhanced both hydrocarbonoclastic and general microbial soil activities. Microbial community analysis using Denaturing Gradient Gel Electrophoresis (DGGE) showed that amending the contaminated soil with plant residues (e.g., pea straw) caused changes in the soil microbial structure, as observed using the Shannon diversity index; the diversity index increased in amended treatments, suggesting that microorganisms present on the dead biomass may become important members of the microbial community. In terms of specific hydrocarbonoclastic activity, the number of alkB gene copies in the soil microbial community increased about 300-fold when plant residues were added to contaminated soil. This study has shown that plant residues stimulate TPH degradation in contaminated soil through stimulation and perhaps addition to the pool of hydrocarbon-utilising microorganisms, resulting in a changed microbial structure and increased alkB gene
-
Lawo, Vera; Fels, Janina; Oberem, Josefa; Koch, Iring
2014-10-01
Using an auditory variant of task switching, we examined the ability to intentionally switch attention in a dichotic-listening task. In our study, participants responded selectively to one of two simultaneously presented auditory number words (spoken by a female and a male, one for each ear) by categorizing its numerical magnitude. The mapping of gender (female vs. male) and ear (left vs. right) was unpredictable. The to-be-attended feature for gender or ear, respectively, was indicated by a visual selection cue prior to auditory stimulus onset. In Experiment 1, explicitly cued switches of the relevant feature dimension (e.g., from gender to ear) and switches of the relevant feature within a dimension (e.g., from male to female) occurred in an unpredictable manner. We found large performance costs when the relevant feature switched, but switches of the relevant feature dimension incurred only small additional costs. The feature-switch costs were larger in ear-relevant than in gender-relevant trials. In Experiment 2, we replicated these findings using a simplified design (i.e., only within-dimension switches with blocked dimensions). In Experiment 3, we examined preparation effects by manipulating the cueing interval and found a preparation benefit only when ear was cued. Together, our data suggest that the large part of attentional switch costs arises from reconfiguration at the level of relevant auditory features (e.g., left vs. right) rather than feature dimensions (ear vs. gender). Additionally, our findings suggest that ear-based target selection benefits more from preparation time (i.e., time to direct attention to one ear) than gender-based target selection.
-
Environmental policy, fuel prices and the switching to natural gas in Santiago, Chile
International Nuclear Information System (INIS)
Coria, Jessica
2009-01-01
In this study I analyzed the role of environmental policies and energy cost savings on the pattern of switching to natural gas by stationary sources in Chile. According to the data most of the switching was induced by the lower cost of natural gas, although environmental policies played a small role and showed that sources were more sensitive to the cost of energy than to the environmental regulation. (author)
-
Exploring the repetition bias in voluntary task switching.
Mittelstädt, Victor; Dignath, David; Schmidt-Ott, Magdalena; Kiesel, Andrea
2018-01-01
In the voluntary task-switching paradigm, participants are required to randomly select tasks. We reasoned that the consistent finding of a repetition bias (i.e., participants repeat tasks more often than expected by chance) reflects reasonable adaptive task selection behavior to balance the goal of random task selection with the goals to minimize the time and effort for task performance. We conducted two experiments in which participants were provided with variable amount of preview for the non-chosen task stimuli (i.e., potential switch stimuli). We assumed that switch stimuli would initiate some pre-processing resulting in improved performance in switch trials. Results showed that reduced switch costs due to extra-preview in advance of each trial were accompanied by more task switches. This finding is in line with the characteristics of rational adaptive behavior. However, participants were not biased to switch tasks more often than chance despite large switch benefits. We suggest that participants might avoid effortful additional control processes that modulate the effects of preview on task performance and task choice.
-
International Nuclear Information System (INIS)
Golde, Karsten
2016-01-01
By means of superconducting equipment it is possible to reduce the transmission losses in distribution networks while increasing the transmission capacity. As a result even saving a superimposed voltage level would be possible, which can put higher investment costs compared to conventional equipment into perspective. For operation of superconducting systems it is necessary to integrate all equipment in the cooling circuit. This also includes switchgears. Due to cooling with liquid nitrogen, however, only vacuum switching technology comes into question. Thus, the suitability of vacuum switches is investigated in this work. For this purpose the mechanics of the interrupters is considered first. Material investigations and switching experiments at ambient temperature and in liquid nitrogen supply information on potential issues. For this purpose, a special pneumatic construction is designed, which allows tens of thousands of switching cycles. Furthermore, the electrical resistance of the interrupters is considered. Since the contact system consists almost exclusively of copper, a remaining residual resistance and appropriate thermal losses must be considered. Since they have to be cooled back, an appropriate evaluation is given taking environmental parameters into account. The dielectric strength of vacuum interrupters is considered both at ambient temperature as well as directly in liquid nitrogen. For this purpose different contact distances are set at different interrupter types. A distinction is made between internal and external dielectric strength. Conditioning and deconditioning effects are minimized by an appropriate choice of the test circuit. The current chopping and resulting overvoltages are considered to be one of the few drawbacks of vacuum switching technology. Using a practical test circuit the height of chopping current is determined and compared for different temperatures. Due to strong scattering the evaluation is done using statistical methods. At
-
Directory of Open Access Journals (Sweden)
Stošić Ivan
2017-01-01
Full Text Available The purpose of this research is to provide feasibility analysis of a long-term sustainable development concept for district heating based on wood residues. In this paper, the experimental study has been conducted starting from the data collected by field researches in municipality of Trstenik (town in Serbia with district heating system currently based on heavy fuel oil and lignite. Using the method of Financial Cost-Benefit Analysis, this study evaluates financial efficiency of investment in district heating plant based on wood residues and energy savings in district heating system. Findings show that such investment could be profitable from the financial point of view: Net Present Value of investment is positive, Financial Rate of Return is high (30.69%, and the pay-back period is relatively favourable (7 years. Moreover, the presented SWOT indicates that there are realistic prospects of implementation of district heating based on wood residues. However, this does not mean everything will go smoothly and easily, keeping in mind a number of challenges that each new concept of district heating contains immanently. Nevertheless, the results of this research could provide useful inputs for the decision makers when selecting appropriate models for improving performance of municipal district heating systems.
-
1.114-gb/s time/space division switch system
Pawelski, Robert L.; Nordin, Ronald A.; Huisman, R. F.; Kelly, S.; Payne, William A.; Veach, R. S.
1990-10-01
Advanced digital communication services11 such as Broadband ISDN High Definition Television (HDTV) and enhanced data networking are expected to require high bandwidth and fast reconfiguration time switching centers available in the 1990''s. Digital GaAs IC''s can allow the implementation of these switching centers providing these services efficiently and at a low cost. The low cost arises from the reduction in hardware power maintenance etc. when the switch is designed to operate at the incoming data rate instead of at a lower rate. In order to utilize the capacity of a high bandwidth data link time division multiplexing is employed. This is a technique where multiple digital signals are interleaved (bit byte or block) on one data link. Clearly it is advantageous to have a switch that not only has a large bandwidth but can reconfigure at the data rate so as to provide bit byte or block switching functions thus being compatible with many different transmission formats. We present an experimental Time/Space Division Switch System capable of operating at over 1 Gb/s. Both custom and commercial Gallium Arsenide (GaAs) devices are used in the design of the various system functional blocks. These functional blocks include a Time Slot Interchanger (TSI) Time Multiplexed Switch (TMS) TMS Controller Multiplexer and Demultiplexers. In addition to the system overview we discuss such issues as printed circuit board microwave interconnections and CAD tools for high speed
-
Guaranteed Cost H∞ Controller Synthesis for Switched Systems Defined on Semi-algebraic Sets
DEFF Research Database (Denmark)
Ahmadi, Mohamadreza; Mojallali, Hamed; Wisniewski, Rafael
2014-01-01
of Filippov solutions which subsumes solutions with infinite switching in finite time and sliding modes. Firstly, conditions assuring asymptotic stability of Filippov solutions pertained to a switched system defined on semi-algebraic sets are formulated. Accordingly, we derive a set of sum of squares...
-
Jacobsen, R; Buysse, J; Gellynck, X
2013-01-01
The rising pressure in terms of cost efficiency on public services pushes governments to transfer part of those services to the private sector. A trend towards more privatizing can be noticed in the collection of municipal household waste. This paper reports the findings of a research project aiming to compare the cost between the service of private and public collection of residual household waste. Multiple case studies of municipalities about the Flemish region of Belgium were conducted. Data concerning the year 2009 were gathered through in-depth interviews in 2010. In total 12 municipalities were investigated, divided into three mutual comparable pairs with a weekly and three mutual comparable pairs with a fortnightly residual waste collection. The results give a rough indication that in all cases the cost of private service is lower than public service in the collection of household waste. Albeit that there is an interest in establishing whether there are differences in the costs and service levels between public and private waste collection services, there are clear difficulties in establishing comparisons that can be made without having to rely on a large number of assumptions and corrections. However, given the cost difference, it remains the responsibility of the municipalities to decide upon the service they offer their citizens, regardless the cost efficiency: public or private. Copyright © 2012 Elsevier Ltd. All rights reserved.
-
Low prepulse, high power density water dielectric switching
International Nuclear Information System (INIS)
Johnson, D.L.; VanDevender, J.P.; Martin, T.H.
1979-01-01
Prepulse voltage suppression has proven difficult in high power, high voltage accelerators employing self-breakdown water dielectric switches. A novel and cost effective water switch has been developed at Sandia Laboratories which reduces prepulse voltage by reducing the capacity across the switch. This prepulse suppression switch causes energy formerly stored in the switch capacity and dissipated in the arc to be useful output energy. The switching technique also allows the pulse forming lines to be stacked in parallel and electrically isolated from the load after the line has been discharged. The switch consists of a ground plane, with several holes, inserted between the switch electrodes. The output line switch electrodes extend through the holes and face electrodes on the pulse forming line (PFL). The capacity between the PFL and the output transmission line is reduced by about 80%. The gap spacing between the output line electrode and the hole in the ground plane is adjusted so that breakdown occurs after the main pulse and provides a crow bar between the load and the source. Performance data from the Proto II, Mite and Ripple test facilities are presented
-
DEFF Research Database (Denmark)
Skjold-Jørgensen, Jakob; Vind, Jesper; Moroz, Olga V.
2017-01-01
Here, we present a lipase mutant containing a biochemical switch allowing a controlled opening and closing of the lid independent of the environment. The closed form of the TlL mutant shows low binding to hydrophobic surfaces compared to the binding observed after activating the controlled switch...... inducing lid-opening. We directly show that lipid binding of this mutant is connected to an open lid conformation demonstrating the impact of the exposed amino acid residues and their participation in binding at the water-lipid interface. The switch was created by introducing two cysteine residues......-D measurements revealed a seven-fold increase in binding rate for the unlocked lipase. The TlL_locked mutant shows structural changes across the protein important for understanding the mechanism of lid-opening and closing. Our experimental results reveal sites of interest for future mutagenesis studies aimed...
-
Directory of Open Access Journals (Sweden)
Sona Suhartana
2005-03-01
Full Text Available The implementation of felling technique in logging companies is not yet carried out efficiently and appropriately. Study on the lowest possible felling technique (LPFf is considered to be important to reduce residual stand damage and felling cost. This study was carried out in a logging company in West Kalimantan in 2004. The aim of this study was to determine the effect of LPFT on residual stand damage and felling cost. Data collected in this research include: residual stand damage, working time, timber volume, productivity, efficiency, stump height and felling cost. Two categories data were analyzed with respect to their possible differences using T-test. The result showed that the implementation of LPFT was more advantage impact compared to that of conventional felling technique, which is indicated by the following factors: (1 Trees damage decreased 2.96%; (2 Poles damage decreased 4.75%; (3 Felling productivity decreased 17.16%; (4 Felling efficiency increased approximately 3.2%; (5 Felling cost increased about Rp 327.07 / m'; and (6 in average stump height was 40.60 cm lower.
-
Analysis and design of a high-efficiency zero-voltage-switching step ...
Indian Academy of Sciences (India)
to soft-switching operation of the power switches and output diodes, the ... However, the complexity and the overall cost are raised and the system ... the proposed converter has a voltage doubler structure which consists of two secondary wind-.
-
Heavy-duty explosively operated pulsed opening and closing switches
International Nuclear Information System (INIS)
Peterson, D.R.; Price, J.H.; Upshaw, J.L.; Weldon, W.F.; Zowarka, R.C.; Gully, J.H.; Spann, M.L.
1991-01-01
This paper discusses improvements to heavy duty, explosively operated, opening and closing switches to reduce component cost, installation cost, and turnaround time without sacrificing reliability. Heavy duty opening and closing switches operated by small explosive charges (50 g or less) are essential to operation of the 60 MJ Balcones power supply. The six independent modules - a 10 MJ homopolar generator (HPG) and a 6 μH storage inductor - can be discharged sequentially, a valuable feature for shaping the current pulse delivered to loads such as high-energy railguns. Each delayed inductor must be isolated from the railgun circuit with a heavy duty closing switch capable of carrying megampere currents to millisecond duration. Similar closing switches are used to crowbar the railgun as the projectile approaches the muzzle: noise reduction, reduction of muzzle arc damage, and reduction of post-launch perturbation of projectile flight. The switches - both opening and closing - are characterized by microhm resistance in the closed state. Current is carried in metallic conductors. Metal-to-metal seams which carry current are maintained in uniform high pressure contact. Efficient switching is crucial to efficient conversion: rotor kinetic energy to stored inductive energy with ∼50% efficiency, stored inductive energy to projectile kinetic energy with ∼30% efficiency. The switches must operate with a precision and repeatability of 10 -5 s, readily achievable with explosives. The opening switches must be structurally and thermally capable of carrying megampere currents for more than 100 ms (∼10 5 C) and develop 10 kV upon opening, stay open for 10 - 2 s, and safely and reliably dissipate megajoules of inductive energy in the event of a fault, a failure of the switch to operate or an attempt to commutate into an open circuit
-
CMOS SPDT switch for WLAN applications
International Nuclear Information System (INIS)
Bhuiyan, M A S; Reaz, M B I; Rahman, L F; Minhad, K N
2015-01-01
WLAN has become an essential part of our today's life. The advancement of CMOS technology let the researchers contribute low power, size and cost effective WLAN devices. This paper proposes a single pole double through transmit/receive (T/R) switch for WLAN applications in 0.13 μm CMOS technology. The proposed switch exhibit 1.36 dB insertion loss, 25.3 dB isolation and 24.3 dBm power handling capacity. Moreover, it only dissipates 786.7 nW power per cycle. The switch utilizes only transistor aspect ratio optimization and resistive body floating technique to achieve such desired performance. In this design the use of bulky inductor and capacitor is avoided to evade imposition of unwanted nonlinearities to the communication signal. (paper)
-
Cmos spdt switch for wlan applications
Bhuiyan, M. A. S.; Reaz, M. B. I.; Rahman, L. F.; Minhad, K. N.
2015-04-01
WLAN has become an essential part of our today's life. The advancement of CMOS technology let the researchers contribute low power, size and cost effective WLAN devices. This paper proposes a single pole double through transmit/receive (T/R) switch for WLAN applications in 0.13 μm CMOS technology. The proposed switch exhibit 1.36 dB insertion loss, 25.3 dB isolation and 24.3 dBm power handling capacity. Moreover, it only dissipates 786.7 nW power per cycle. The switch utilizes only transistor aspect ratio optimization and resistive body floating technique to achieve such desired performance. In this design the use of bulky inductor and capacitor is avoided to evade imposition of unwanted nonlinearities to the communication signal.
-
Examining age-related differences in auditory attention control using a task-switching procedure.
Lawo, Vera; Koch, Iring
2014-03-01
Using a novel task-switching variant of dichotic selective listening, we examined age-related differences in the ability to intentionally switch auditory attention between 2 speakers defined by their sex. In our task, young (M age = 23.2 years) and older adults (M age = 66.6 years) performed a numerical size categorization on spoken number words. The task-relevant speaker was indicated by a cue prior to auditory stimulus onset. The cuing interval was either short or long and varied randomly trial by trial. We found clear performance costs with instructed attention switches. These auditory attention switch costs decreased with prolonged cue-stimulus interval. Older adults were generally much slower (but not more error prone) than young adults, but switching-related effects did not differ across age groups. These data suggest that the ability to intentionally switch auditory attention in a selective listening task is not compromised in healthy aging. We discuss the role of modality-specific factors in age-related differences.
-
Measurements of three dimensional residual stress distribution on laser irradiated spot
International Nuclear Information System (INIS)
Tanaka, Hirotomo; Akita, Koichi; Ohya, Shin-ichi; Sano, Yuji; Naito, Hideki
2004-01-01
Three dimensional residual stress distributions on laser irradiated spots were measured using synchrotron radiation to study the basic mechanism of laser peening. A water-immersed sample of high tensile strength steel was irradiated with Q-switched and frequency-doubled Nd:YAG laser. The residual stress depth profile of the sample was obtained by alternately repeating the measurement and surface layer removal by electrolytic polishing. Tensile residual stresses were observed on the surface of all irradiated spots, whereas residual stress changed to compressive just beneath the surface. The depth of compressive residual stress imparted by laser irradiation and plastic deformation zone increased with increasing the number of laser pulses irradiated on the same spot. (author)
-
Generation of an activating Zn(2+) switch in the dopamine transporter
DEFF Research Database (Denmark)
Loland, Claus Juul; Norregaard, Lene; Litman, Thomas
2002-01-01
Binding of Zn(2+) to the endogenous Zn(2+) binding site in the human dopamine transporter leads to potent inhibition of [(3)H]dopamine uptake. Here we show that mutation of an intracellular tyrosine to alanine (Y335A) converts this inhibitory Zn(2+) switch into an activating Zn(2+) switch, allowing...... Zn(2+)-dependent activation of the transporter. The tyrosine is part of a conserved YXX Phi trafficking motif (X is any residue and Phi is a residue with a bulky hydrophobic group), but Y335A did not show alterations in surface targeting or protein kinase C-mediated internalization. Despite wild...... for several substrates was increased. However, the presence of Zn(2+) in micromolar concentrations increased the V(max) up to 24-fold and partially restored the apparent affinities. The capability of Zn(2+) to restore transport is consistent with a reversible, constitutive shift in the distribution...
-
Ripamonti, Francesco; Resta, Ferruccio; Vivani, Andrea
2015-04-01
The aim of this paper is to present two control logics and an attitude estimator for UAV stabilization and remote piloting, that are as robust as possible to physical parameters variation and to other external disturbances. Moreover, they need to be implemented on low-cost micro-controllers, in order to be attractive for commercial drones. As an example, possible applications of the two switching control logics could be area surveillance and facial recognition by means of a camera mounted on the drone: the high computational speed logic is used to reach the target, when the high-stability one is activated, in order to complete the recognition tasks.
-
Personal Computer Based Controller For Switched Reluctance Motor Drives
Mang, X.; Krishnan, R.; Adkar, S.; Chandramouli, G.
1987-10-01
Th9, switched reluctance motor (SRM) has recently gained considerable attention in the variable speed drive market. Two important factors that have contributed to this are, the simplicity of construction and the possibility of developing low cost con-trollers with minimum number of switching devices in the drive circuits. This is mainly due to the state-of-art of the present digital circuits technology and the low cost of switching devices. The control of this motor drive is under research. Optimized performance of the SRM motor drive is very dependent on the integration of the controller, converter and the motor. This research on system integration involves considerable changes in the control algorithms and their implementation. A Personal computer (PC) based controller is very appropriate for this purpose. Accordingly, the present paper is concerned with the design of a PC based controller for a SRM. The PC allows for real-time microprocessor control with the possibility of on-line system parameter modifications. Software reconfiguration of this controller is easier than a hardware based controller. User friendliness is a natural consequence of such a system. Considering the low cost of PCs, this controller will offer an excellent cost-effective means of studying the control strategies for the SRM drive intop greater detail than in the past.
-
General Slowing and Education Mediate Task Switching Performance Across the Life-Span
Directory of Open Access Journals (Sweden)
Luca Moretti
2018-05-01
Full Text Available Objective: This study considered the potential role of both protective factors (cognitive reserve, CR and adverse ones (general slowing in modulating cognitive flexibility in the adult life-span.Method: Ninety-eight individuals performed a task-switching (TS paradigm in which we adopted a manipulation concerning the timing between the cue and the target. Working memory demands were minimized by using transparent cues. Additionally, indices of cognitive integrity, depression, processing speed and different CR dimensions were collected and used in linear models accounting for TS performance under the different time constraints.Results: The main results showed similar mixing costs and higher switching costs in older adults, with an overall age-dependent effect of general slowing on these costs. The link between processing speed and TS performance was attenuated when participants had more time to prepare. Among the different CR indices, formal education only was associated with reduced switch costs under time pressure.Discussion: Even though CR is often operationalized as a unitary construct, the present research confirms the benefits of using tools designed to distinguish between different CR dimensions. Furthermore, our results provide empirical support to the assumption that processing speed influence on executive performance depends on time constraints. Finally, it is suggested that whether age differences appear in terms of switch or mixing costs depends on working memory demands (which were low in our tasks with transparent cues.
-
Assessing the Consequences of a Channel Switch
Xinlei (Jack) Chen; George John; Om Narasimhan
2008-01-01
Switching marketing channels is an expensive and sticky decision. While a number of theories suggest efficiency and strategic differences between channels, there is virtually no work on combining these ideas into an empirically workable methodology to assess the impact of a channel switch. In this study, we undertake to close this gap with an empirical study of the sports drink market, featuring competing producers and heterogeneous channels. We estimate demand and cost parameters for a numbe...
-
The Influence of Feedback on Task-Switching Performance: A Drift Diffusion Modeling Account.
Cohen Hoffing, Russell; Karvelis, Povilas; Rupprechter, Samuel; Seriès, Peggy; Seitz, Aaron R
2018-01-01
Task-switching is an important cognitive skill that facilitates our ability to choose appropriate behavior in a varied and changing environment. Task-switching training studies have sought to improve this ability by practicing switching between multiple tasks. However, an efficacious training paradigm has been difficult to develop in part due to findings that small differences in task parameters influence switching behavior in a non-trivial manner. Here, for the first time we employ the Drift Diffusion Model (DDM) to understand the influence of feedback on task-switching and investigate how drift diffusion parameters change over the course of task switch training. We trained 316 participants on a simple task where they alternated sorting stimuli by color or by shape. Feedback differed in six different ways between subjects groups, ranging from No Feedback (NFB) to a variety of manipulations addressing trial-wise vs. Block Feedback (BFB), rewards vs. punishments, payment bonuses and different payouts depending upon the trial type (switch/non-switch). While overall performance was found to be affected by feedback, no effect of feedback was found on task-switching learning. Drift Diffusion Modeling revealed that the reductions in reaction time (RT) switch cost over the course of training were driven by a continually decreasing decision boundary. Furthermore, feedback effects on RT switch cost were also driven by differences in decision boundary, but not in drift rate. These results reveal that participants systematically modified their task-switching performance without yielding an overall gain in performance.
-
A Scheme to Optimize Flow Routing and Polling Switch Selection of Software Defined Networks.
Directory of Open Access Journals (Sweden)
Huan Chen
Full Text Available This paper aims at minimizing the communication cost for collecting flow information in Software Defined Networks (SDN. Since flow-based information collecting method requires too much communication cost, and switch-based method proposed recently cannot benefit from controlling flow routing, jointly optimize flow routing and polling switch selection is proposed to reduce the communication cost. To this end, joint optimization problem is formulated as an Integer Linear Programming (ILP model firstly. Since the ILP model is intractable in large size network, we also design an optimal algorithm for the multi-rooted tree topology and an efficient heuristic algorithm for general topology. According to extensive simulations, it is found that our method can save up to 55.76% communication cost compared with the state-of-the-art switch-based scheme.
-
A Scheme to Optimize Flow Routing and Polling Switch Selection of Software Defined Networks.
Chen, Huan; Li, Lemin; Ren, Jing; Wang, Yang; Zhao, Yangming; Wang, Xiong; Wang, Sheng; Xu, Shizhong
2015-01-01
This paper aims at minimizing the communication cost for collecting flow information in Software Defined Networks (SDN). Since flow-based information collecting method requires too much communication cost, and switch-based method proposed recently cannot benefit from controlling flow routing, jointly optimize flow routing and polling switch selection is proposed to reduce the communication cost. To this end, joint optimization problem is formulated as an Integer Linear Programming (ILP) model firstly. Since the ILP model is intractable in large size network, we also design an optimal algorithm for the multi-rooted tree topology and an efficient heuristic algorithm for general topology. According to extensive simulations, it is found that our method can save up to 55.76% communication cost compared with the state-of-the-art switch-based scheme.
-
Free vibration of geometrically nonlinear micro-switches under electrostatic and Casimir forces
International Nuclear Information System (INIS)
Jia, X L; Kitipornchai, S; Lim, C W; Yang, J
2010-01-01
This paper investigates the free vibration characteristics of micro-switches under combined electrostatic, intermolecular forces and axial residual stress, with an emphasis on the effect of geometric nonlinear deformation due to mid-plane stretching and the influence of Casimir force. The micro-switch considered in this study is made of either homogeneous material or non-homogeneous functionally graded material with two material phases. The Euler–Bernoulli beam theory with von Karman type nonlinear kinematics is applied in the theoretical formulation. The principle of virtual work is used to derive the nonlinear governing differential equation. The eigenvalue problem which describes free vibration of the micro-beam at its statically deflected state is then solved using the differential quadrature method. The natural frequencies and mode shapes of micro-switches for four different boundary conditions (i.e. clamped–clamped, clamped–simply supported, simply supported and clamped–free) are obtained. The solutions are validated through direct comparisons with experimental and other existing results reported in previous studies. A parametric study is conducted to show the significant effects of geometric nonlinearity, Casimir force, axial residual stress and material composition for the natural frequencies
-
International Nuclear Information System (INIS)
Memon, A.A.
2013-01-01
This paper presents a gate driver circuit for the switching devices used in the asymmetrical converter for a switched reluctance machine with reduced number of isolated dc/dc converters. Isolation required in the gate driver circuit of switching devices is indispensable. For the purpose of isolation different arrangements may be used such as pulse transformers. The dc/dc converter for isolation and powering the gate drive circuits is suitable, cheaper in cost and simple to implement. It is also significant that required number of isolation converters is much less than the switches used in converter. In addition, a simple logic circuit has been presented for producing the gate signals at correct phase sequence which is compared with the gated signals directly obtained from the encoder of an existing machine. (author)
-
Navon, David; Kaplan, Todd R; Kasten, Ronen
2013-11-01
To study switching behavior, an experiment mimicking the state of a driver on the road was conducted. In each trial participants were given a chance to switch lanes. Despite the fact that lane switching had no sound rational basis, participants often switched lanes when the speed of driving in their lane on the previous trial was relatively slow. That tendency was discerned even when switching behavior had been sparsely reinforced, and was especially marked in almost a third of the participants, who manifested it consistently. The findings illustrate a type of behavior occurring in various contexts (e.g., stocks held in a portfolio, conduct pertinent for residual life expectancy, supermarket queues). We argue that this behavior may be due to a fallacy reminiscent of that arising in the well-known "envelopes problem", in which each of two players holds a sum of money of which she knows nothing about except that it is either half or twice the amount held by the other player. Players may be paradoxically tempted to exchange assets, since an exchange fallaciously appears to always yield an expected value greater than whatever is regarded as the player's present assets. We argue that the fallacy is due to egocentrically framing the problem as if the "amount I have" is definite, albeit unspecified, and shows that framing the paradox acentrically instead eliminates the incentive to exchange assets. A possible psychological source for the human disposition to frame problems in a way that inflates expected gain is discussed. Finally, a heuristic meant to avert the source of the fallacy is proposed. © 2013.
-
Study of solar array switching power management technology for space power system
Cassinelli, J. E.
1982-01-01
This report documents work performed on the Solar Array Switching Power Management Study. Mission characteristics for three missions were defined to the depth necessary to determine their power management requirements. Solar array switching concepts which could satisfy the mission requirements were identified. The switching concepts were compared with a conventional buck regulator system for cost, weight and volume, reliability, efficiency and thermal control. Solar array switching provided significant advantages in all areas of comparison for the reviewed missions.
-
Baly, Alberto; Gonzalez, Karelia; Cabrera, Pedro; Popa, Julio C; Toledo, Maria E; Hernandez, Claudia; Montada, Domingo; Vanlerberghe, Veerle; Van der Stuyft, Patrick
2016-05-01
Information on the cost of implementing residual insecticide treatment (RIT) for Aedes control is scarce. We evaluated the incremental cost on top of intensive conventional routine activities of the Aedes control programme (ACP) in the city of Santiago de Cuba, Cuba. We conducted the cost analysis study in 2011-2012, from the perspective of the ACP. Data sources were bookkeeping records, activity registers of the Provincial ACP Centre and the accounts of an RIT implementation study in 21 clusters of on average four house blocks comprising 5180 premises. The annual cost of the routine ACP activities was 19.66 US$ per household. RIT applications in rounds at 4-month intervals covering, on average, 97.2% and using 8.5 g of delthametrine annually per household, cost 3.06 US$ per household per year. Delthametrine comprised 66.5% of this cost; the additional cost for deploying RIT comprised 15.6% of the total ACP routine cost and 27% of the cost related to routine adult stage Aedes control. The incremental cost of implementing RIT is high. It should be weighed against the incremental effect on the burden caused by the array of pathogens transmitted by Aedes. The cost could be reduced if the insecticide became cheaper, by limiting the number of yearly applications or by targeting transmission hot spots. © 2016 John Wiley & Sons Ltd.
-
Investigating the relationship between media multitasking and processes involved in task-switching.
Alzahabi, Reem; Becker, Mark W; Hambrick, David Z
2017-11-01
Although multitasking with media has increased dramatically in recent years (Rideout, Foehr, & Roberts, 2010), the association between media multitasking and cognitive performance is poorly understood. In addition, the literature on the relationship between media multitasking and task-switching, one measure of cognitive control, has produced mixed results (Alzahabi & Becker, 2013; Minear et al., 2013; Ophir, Nass, & Wagner, 2009). Here we use an individual differences approach to investigate the relationship between media multitasking and task-switching performance by first examining the structure of task-switching and identifying the latent factors that contribute to switch costs. Participants performed a series of 3 different task-switching paradigms, each designed to isolate the effects of a specific putative mechanism (e.g., advanced preparation) related to task-switching performance, as well as a series of surveys to measure media multitasking and intelligence. The results suggest that task-switching performance is related to 2 somewhat independent factors, namely an advanced preparation factor and passive decay factor. In addition, multitasking with media was related to a faster ability to prepare for tasks, resulting in faster task-switching performance without a cost to accuracy. Media multitasking and intelligence were both unrelated to passive decay factors. These findings are consistent with a 2-component model of task-switching (Sohn & Anderson, 2001), as well as an automatic/executive framework of cognitive control (Schneider & Shiffrin, 1977). (PsycINFO Database Record (c) 2017 APA, all rights reserved).
-
Elastomeric organic material for switching application
Energy Technology Data Exchange (ETDEWEB)
Shiju, K., E-mail: shijuvenus@gmail.com, E-mail: pravymon@gmail.com, E-mail: ppredeep@gmail.com; Praveen, T., E-mail: shijuvenus@gmail.com, E-mail: pravymon@gmail.com, E-mail: ppredeep@gmail.com; Preedep, P., E-mail: shijuvenus@gmail.com, E-mail: pravymon@gmail.com, E-mail: ppredeep@gmail.com [Laboratory for Molecular Photonics and Electronics (LAMP), Department of Physics, National Institute of Technology, Calicut, Kerala, 673601 (India)
2014-10-15
Organic Electronic devices like OLED, Organic Solar Cells etc are promising as, cost effective alternatives to their inorganic counterparts due to various reasons. However the organic semiconductors currently available are not attractive with respect to their high cost and intricate synthesis protocols. Here we demonstrate that Natural Rubber has the potential to become a cost effective solution to this. Here an attempt has been made to fabricate iodine doped poly isoprene based switching device. In this work Poly methyl methacrylate is used as dielectric layer and Aluminium are employed as electrodes.
-
The Influence of Feedback on Task-Switching Performance: A Drift Diffusion Modeling Account
Directory of Open Access Journals (Sweden)
Russell Cohen Hoffing
2018-02-01
Full Text Available Task-switching is an important cognitive skill that facilitates our ability to choose appropriate behavior in a varied and changing environment. Task-switching training studies have sought to improve this ability by practicing switching between multiple tasks. However, an efficacious training paradigm has been difficult to develop in part due to findings that small differences in task parameters influence switching behavior in a non-trivial manner. Here, for the first time we employ the Drift Diffusion Model (DDM to understand the influence of feedback on task-switching and investigate how drift diffusion parameters change over the course of task switch training. We trained 316 participants on a simple task where they alternated sorting stimuli by color or by shape. Feedback differed in six different ways between subjects groups, ranging from No Feedback (NFB to a variety of manipulations addressing trial-wise vs. Block Feedback (BFB, rewards vs. punishments, payment bonuses and different payouts depending upon the trial type (switch/non-switch. While overall performance was found to be affected by feedback, no effect of feedback was found on task-switching learning. Drift Diffusion Modeling revealed that the reductions in reaction time (RT switch cost over the course of training were driven by a continually decreasing decision boundary. Furthermore, feedback effects on RT switch cost were also driven by differences in decision boundary, but not in drift rate. These results reveal that participants systematically modified their task-switching performance without yielding an overall gain in performance.
-
Logging and Agricultural Residue Supply Curves for the Pacific Northwest
Energy Technology Data Exchange (ETDEWEB)
Kerstetter, James D.; Lyons, John Kim
2001-01-01
This report quantified the volume of logging residues at the county level for current timber harvests. The cost of recovering logging residues was determined for skidding, yearding, loading, chipping and transporting the residues. Supply curves were developed for ten candidate conversion sites in the Pacific Northwest Region. Agricultural field residues were also quantified at the county level using five-year average crop yields. Agronomic constraints were applied to arrive at the volumes available for energy use. Collection costs and transportation costs were determined and supply curves generated for thirteen candidate conversion sites.
-
The switch to refillable bottled water in Indonesia: a serious health risk.
Komarulzaman, Ahmad; de Jong, Eelke; Smits, Jeroen
2017-10-01
In recent years, the consumption of refillable bottled water has increased considerably in emerging countries. However, the quality of this water is often questionable, as authorities lack the capacity to properly check refilling depots. Given that refillable bottled water not only replaces unimproved water sources, but also better-quality sources, like piped and branded bottled water, its increasing use poses a major health risk. We investigate the motives behind the decision to switch to refillable bottled water in Indonesia. Findings indicate that this switch is driven by lifestyle motives, as well as by cost and availability considerations. It is mostly the young affluent households who switch from piped and 'other' sources to refillable bottled water. In rural areas, the tendency to make this switch is negatively affected by availability problems and the higher price of refillable bottled water. Availability and cost also influence the switch from branded bottled to refillable bottled water, but here it is the poorer households who have a higher propensity to switch. Further exploration of the lifestyle motive and affordability issues, as well as better monitoring of the refilling depots, are needed to improve the quality of drinking water in Indonesia and other emerging countries.
-
Energy Technology Data Exchange (ETDEWEB)
Doehler, H.; Schliebner, P. [Kuratorium fuer Technik und Bauwesen in der Landwirtschaft (KTBL), Darmstadt (Germany)
2007-07-01
With the transformation of the EEG (Renewable Energy Resources Act), the number of biogas plants increased rapidly. Additionally, an enlargement of the performance of the plants and a regional concentration process take place. Recently, processing routes for liquid manure will be considered in order to reduce problems of the surplus of nutrients as well as the costs of the transport of the water-rich residues of fermentation. Under this aspect, the authors of the contribution under consideration report on procedures for the processing of residues of fermentation as well as costs and utilization of these procedures. By the example of an agrarian society, four procedures for the output and processing of residues of fermentation are compared with one another regarding to expenditure of work time, investments and economy: Output of residues of fermentation, treatment of residues of fermentation by separation, processing of residues of fermentation by means of diaphragm technology, processing of residues of fermentation by means of evaporation technology. The processing routes reduce the residues of fermentation by 60 %. Thus, the costs of output and the necessary storage capacities for residues of fermentation are reduced. Presently, no savings regarding to work completion by the processing of the residues of fermentation can be obtained. The specific total costs of the investigated procedures are between 2.64 Euro/m{sup 3} according to the procedure with separation and to 8.64 Euro/m{sup 3} according to the diaphragm processing route. An enhanced demand of investment does not cause compellingly the highest specific total costs of the procedures. In comparison to the output of residues of fermentation, the examined procedures for the processing of residues of fermentation do not result in economical and ergonomic advantages. The high costs of investment and operating cost of the processing of residues of fermentation cannot be compensated by the reduced costs of output
-
Research on control function switch of nuclear power plant control room
International Nuclear Information System (INIS)
Mei Shibo; Mao Ting; Cheng Bo; Zhang Gang
2014-01-01
The nuclear power plant provides main control room (MCR) to the unit operators for the plant monitoring and control, and provides the remote shutdown station (RSS) as the back-up control room, which is used only when MCR is unavailable. The RSS could be used to monitor and control the plant, bring the plant into shutdown state and remove the residual heat. The command from MCR and RSS is blocked by each other and can not be executed at the same time. The operation mode switch function between MCR and RSS is carried out by MCR/RSS mode switches. The operation mode switch scheme of CPR1000, ERP and AP1000 were compared and researched, and some design bases for new nuclear power plant were submitted in this paper. These design bases could be referred during the design of control function switch for the new nuclear power plants, in order to put forward a more practical, simple, safe and convenient scheme. (authors)
-
Efficiency Characteristics of Low Power Hybrid Switched Reluctance Motor
DEFF Research Database (Denmark)
Jakobsen, Uffe; Ahn, Jin-Woo
2009-01-01
Switched reluctance motors (SRM) are usually considered inferior in terms of efficiency as compared to permanent magnet synchronous motors (PMSM) and brushless DC-motors (BLDC), but less costly. This article presents a test of a 70W hybrid switched reluctance motor (HSRM), that archieves a peak...... efficiency for the motor drive of more than 74%, and an efficiency for the motor of almost 80%....
-
The neural basis of task switching changes with skill acquisition
Directory of Open Access Journals (Sweden)
Koji eJimura
2014-05-01
Full Text Available Learning novel skills involves reorganization and optimization of cognitive processing involving a broad network of brain regions. Previous work has shown asymmetric costs of switching to a well-trained task versus a poorly-trained task, but the neural basis of these differential switch costs is unclear. The current study examined the neural signature of task switching in the context of acquisition of new skill. Human participants alternated randomly between a novel visual task (mirror-reversed word reading and a highly practiced one (plain word reading, allowing the isolation of task switching and skill set maintenance. Two scan sessions were separated by two weeks, with behavioral training on the mirror reading task in between the two sessions. Broad cortical regions, including bilateral prefrontal, parietal, and extrastriate cortices, showed decreased activity associated with learning of the mirror reading skill. In contrast, learning to switch to the novel skill was associated with decreased activity in a focal subcortical region in the dorsal striatum. Switching to the highly practiced task was associated with a non-overlapping set of regions, suggesting substantial differences in the neural substrates of switching as a function of task skill. Searchlight multivariate pattern analysis also revealed that learning was associated with decreased pattern information for mirror versus plain reading tasks in fronto-parietal regions. Inferior frontal junction and posterior parietal cortex showed a joint effect of univariate activation and pattern information. These results suggest distinct learning mechanisms task performance and executive control as a function of learning.
-
Influence of surface effects on the pull-in instability of NEMS electrostatic switches
Energy Technology Data Exchange (ETDEWEB)
Ma, Jianming Bryan; Jiang Liying; Asokanthan, Samuel F, E-mail: lyjiang@eng.uwo.ca, E-mail: sasokanthan@eng.uwo.ca [Department of Mechanical and Materials Engineering, University of Western Ontario, London, ON, N6A 5B9 (Canada)
2010-12-17
The influence of surface effects, including residual surface stress and surface elasticity, on the pull-in instability of electrostatic switches in nanoelectromechanical systems (NEMS) is studied using an Euler-Bernoulli beam model. This model is inherently nonlinear due to the driving electrostatic force and Casimir force which become dominant at the nanoscale. Since no exact solutions are available for the resulting nonlinear differential equation, He's homotopy perturbation method (HPM) is used to get the approximate analytical solutions to the static bending of NEMS switches, which are validated by numerical solutions of the finite difference method (FDM). The results demonstrate that surface effects play a significant role in the selection of basic design parameters of NEMS switches, such as static deflection, pull-in voltage and detachment length. Surface effects on low-voltage actuation windows are also characterized for these switches. The present study is envisaged to provide useful insights for the design of NEMS switches.
-
Björnsdóttir, U S; Gizurarson, S; Sabale, U
2013-09-01
Asthma requires individually tailored and careful management to control and prevent symptoms and exacerbations. Selection of the most appropriate treatment is dependent on both the choice of drugs and inhaler device; however, financial pressures may result in patients being switched to alternative medications and devices in an attempt to reduce costs. This review aimed to examine the published literature in order to ascertain whether switching a patient's asthma medications or device negatively impacts clinical and economic outcomes. A literature search of MEDLINE (2001-13 September 2011) was conducted to identify English-language articles focused on the direct impact of switching medications and inhaler devices and switching from fixed-dose combination to monocomponent therapy via separate inhalers in patients with asthma; the indirect impacts of switching were also assessed. Evidence showed that non-consented switching of medications and inhalers in patients with asthma can be associated with a range of negative outcomes, at both individual and organisational levels. Factors that reduce adherence may lead to compromised symptom control resulting in increased healthcare resource utilisation and poorer patient quality of life. The consequences of a non-consented switch should be weighed carefully against arguments supporting an inhaler switch without the patient's consent for non-medical/budgetary reasons, such as potential reductions in initial acquisition costs, which may be associated with subsequent additional healthcare needs. Given the increasing pressure for reduced costs and efficient allocation of limited healthcare resources, an additional investment in ensuring high medication adherence may lead to greater savings due to a potentially decreased demand for healthcare services. In contrast, savings achieved in acquisition costs may result in a greater net loss due to increased healthcare consumption caused by decreased asthma control. © 2013 The Authors
-
Discharge switch driving by Lorentz force and its characteristics
International Nuclear Information System (INIS)
Inoue, Kunikazu; Hasegawa, Mitsuo; Ueno, Isao
1999-01-01
Our newly developed 'Rotary-Arc mode Discharge Switch' have featured longer life expectancy and lower inductance-wise by extremely minimizing the insulation deterioration and consumable main electrode through installation of permanent magnet, simplified construction and careful attention on the demagnetization. Resultantly, highly efficient and larger capacitive discharge switch have been available at such economical cost. In addition, by having derived an experimental formula for the driving speed of the arc, the required design parameters of the discharge switch have been determined, and then it has been well noted that any affections of electro-magnetic Lorentz force toward the starting characteristics have been negligible small. All these have made it possible to materialize such discharge switch which will satisfy the required conditions. (author)
-
Kray, Jutta; Karbach, Julia; Haenig, Susann; Freitag, Christine
2011-01-01
The key cognitive impairments of children with attention deficit/-hyperactivity disorder (ADHD) include executive control functions such as inhibitory control, task-switching, and working memory (WM). In this training study we examined whether task-switching training leads to improvements in these functions. Twenty children with combined type ADHD and stable methylphenidate medication performed a single-task and a task-switching training in a crossover training design. The children were randomly assigned to one of two groups. One group started with the single-task training and then performed the task-switching training and the other group vice versa. The effectiveness of the task-switching training was measured as performance improvements (relative to the single-task training) on a structurally similar but new switching task and on other executive control tasks measuring inhibitory control and verbal WM as well as on fluid intelligence (reasoning). The children in both groups showed improvements in task-switching, that is, a reduction of switching costs, but not in performing the single-tasks across four training sessions. Moreover, the task-switching training lead to selective enhancements in task-switching performance, that is, the reduction of task-switching costs was found to be larger after task-switching than after single-task training. Similar selective improvements were observed for inhibitory control and verbal WM, but not for reasoning. Results of this study suggest that task-switching training is an effective cognitive intervention that helps to enhance executive control functioning in children with ADHD.
-
Rathod, Rahul H; Jurgen, Brittney; Hamershock, Rose A; Friedman, Kevin G; Marshall, Audrey C; Samnaliev, Mihail; Graham, Dionne A; Jenkins, Kathy; Lock, James E; Powell, Andrew J
2017-12-01
Standardized Clinical Assessment and Management Plans (SCAMPs) are a quality improvement initiative designed to reduce unnecessary utilization, decrease practice variation, and improve patient outcomes. We created a novel methodology, the SCAMP managed episode of care (SMEOC), which encompasses multiple encounters to assess the impact of the arterial switch operation (ASO) SCAMP on total costs. All ASO SCAMP patients (dates March 2009 to July 2015) were compared to a control group of ASO patients (January 2001 to February 2009). Patients were divided into "younger" (operation while maintaining quality of care. © 2017 Wiley Periodicals, Inc.
-
Fault detection for discrete-time switched systems with sensor stuck faults and servo inputs.
Zhong, Guang-Xin; Yang, Guang-Hong
2015-09-01
This paper addresses the fault detection problem of switched systems with servo inputs and sensor stuck faults. The attention is focused on designing a switching law and its associated fault detection filters (FDFs). The proposed switching law uses only the current states of FDFs, which guarantees the residuals are sensitive to the servo inputs with known frequency ranges in faulty cases and robust against them in fault-free case. Thus, the arbitrarily small sensor stuck faults, including outage faults can be detected in finite-frequency domain. The levels of sensitivity and robustness are measured in terms of the finite-frequency H- index and l2-gain. Finally, the switching law and FDFs are obtained by the solution of a convex optimization problem. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.
-
Cycling of conventional power plants: Technical limits and actual costs
International Nuclear Information System (INIS)
Van den Bergh, Kenneth; Delarue, Erik
2015-01-01
Highlights: • Literature reports a wide range of cycling parameters (technical and cost-related). • The impact of different cycling parameters is assessed. • The German 2013 system is studied as a case study. • Even for stringent parameters, the dynamic limit of the portfolio is not reached. • Cycling costs can be reduced with 40% when taken into account in the scheduling. - Abstract: Cycling of conventional generation units is an important source of operational flexibility in the electricity generation system. Cycling is changing the power output of conventional units by means of ramping and switching (starting up and shutting down). In the literature, a wide range of technical and cost-related cycling parameters can be found. Different studies allocate different cycling parameters to similar generation units. This paper assesses the impact of different cycling parameters allocated to a conventional generation portfolio. Both the technical limitations of power plants and all costs related to cycling are considered. The results presented in this paper follow from a unit commitment model, used for a case study based on the German 2013 system. The conventional generation portfolio has to deliver different residual load time series, corresponding to different levels of renewables penetration. The study shows, under the assumptions made, that although the dynamic limits of some units are reached, the limits of the conventional generation portfolio as a whole are not reached, even if stringent dynamic parameters are assigned to the generation portfolio and a highly variable residual load is imposed to the system. The study shows also the importance of including full cycling costs in the unit commitment scheduling. The cycling cost can be reduced by up to 40% when fully taken into account
-
Age matters: The effect of onset age of video game play on task-switching abilities.
Hartanto, Andree; Toh, Wei Xing; Yang, Hwajin
2016-05-01
Although prior research suggests that playing video games can improve cognitive abilities, recent empirical studies cast doubt on such findings (Unsworth et al., 2015). To reconcile these inconsistent findings, we focused on the link between video games and task switching. Furthermore, we conceptualized video-game expertise as the onset age of active video-game play rather than the frequency of recent gameplay, as it captures both how long a person has played video games and whether the individual began playing during periods of high cognitive plasticity. We found that the age of active onset better predicted switch and mixing costs than did frequency of recent gameplay; specifically, players who commenced playing video games at an earlier age reaped greater benefits in terms of task switching than did those who started at a later age. Moreover, improving switch costs required a more extensive period of video-game experience than did mixing costs; this finding suggests that certain cognitive abilities benefit from different amounts of video game experience.
-
A Fault Diagnostic Method for Position Sensor of Switched Reluctance Wind Generator
DEFF Research Database (Denmark)
Wang, Chao; Liu, Xiao; Liu, Hui
2016-01-01
Fast and accurate fault diagnosis of the position sensor is of great significance to ensure the reliability as well as sensor fault tolerant operation of the Switched Reluctance Wind Generator (SRWG). This paper presents a fault diagnostic scheme for a SRWG based on the residual between the estim...
-
International Nuclear Information System (INIS)
Gatfaoui, Hayette
2015-01-01
We consider a firm, which can choose between crude oil and natural gas to run its business. The firm selects the energy source, which minimizes its energy or production costs at a given time horizon. Assuming the energy strategy to be established over a fixed time window, the energy choice decision will be made at a given future date T. In this light, the firm's energy cost can be considered as a long position in a risk-free bond by an amount of the terminal oil price, and a short position in a European put option to switch from oil to gas by an amount of the terminal oil price too. As a result, the option to switch from crude oil to natural gas allows for establishing a hedging strategy with respect to energy costs. Modeling stochastically the underlying asset of the European put, we propose a valuation formula of the option to switch and calibrate the pricing formula to empirical data on a daily basis. Hence, our innovative framework handles widely the hedge against the price increase of any given energy source versus the price of another competing energy source (i.e. minimizing energy costs). Moreover, we provide a price for the cost-reducing effect of the capability to switch from one energy source to another one (i.e. hedging energy price risk). - Highlights: • We consider a firm, which chooses either crude oil or natural gas as an energy source. • The capability to switch offers the firm a hedge against energy commodity price risk. • A European put option prices the ability to switch from crude oil to natural gas. • The capability to switch between two energy sources reduces the firm's energy costs. • The discount illustrates the efficiency of the energy management policy (e.g. timing).
-
Directory of Open Access Journals (Sweden)
Jutta eKray
2012-01-01
Full Text Available The key cognitive impairments of children with attention deficit/-hyperactivity disorder (ADHD include executive control functions such as inhibitory control, task switching, and working memory. In this training study we examined whether task-switching training leads to improvements in these functions. Twenty children with combined type ADHD and stable methylphenidate medication performed a single-task and a task-switching training in a crossover training design. The children were randomly assigned to one of two groups. One group started with the single-task training and then performed the task-switching training and the other group vice versa. The effectiveness of the task-switching training was measured as performance improvements (relative to the single-task training on a structurally similar but new switching task and on other executive control tasks measuring inhibitory control and verbal working memory as well as on fluid intelligence (reasoning. The children in both groups showed improvements in task switching, that is, a reduction of switching costs, but not in performing the single tasks across four training sessions. Moreover, the task-switching training lead to selective enhancements in task-switching performance, that is, the reduction of task-switching costs was found to be larger after task-switching than after single-task training. Similar selective improvements were observed for inhibitory control and verbal working memory, but not for reasoning. Results of this study suggest that task-switching training is an effective cognitive intervention that helps to enhance executive control functioning in children with ADHD.
-
Switch for Good Community Program
Energy Technology Data Exchange (ETDEWEB)
Crawford, Tabitha [Balfour Beatty Military Housing Management LLC, Newtown Square, PA (United States); Amran, Martha [WattzOn, Inc., Mountain View, CA (United States)
2013-11-19
Switch4Good is an energy-savings program that helps residents reduce consumption from behavior changes; it was co-developed by Balfour Beatty Military Housing Management (BB) and WattzOn in Phase I of this grant. The program was offered at 11 Navy bases. Three customer engagement strategies were evaluated, and it was found that Digital Nudges (a combination of monthly consumption statements with frequent messaging via text or email) was most cost-effective. The program was delivered on-time and on-budget, and its success is based on the teamwork of local BB staff and the WattzOn team. The following graphic shows Switch4Good “by the numbers”, e.g. the scale of operations achieved during Phase I.
-
Residual learning rates in lead-acid batteries: Effects on emerging technologies
International Nuclear Information System (INIS)
Matteson, Schuyler; Williams, Eric
2015-01-01
The low price of lead-acid, the most popular battery, is often used in setting cost targets for emerging energy storage technologies. Future cost reductions in lead acid batteries could increase investment and time scales needed for emerging storage technologies to reach cost-parity. In this paper the first documented model of cost reductions for lead-acid batteries is developed. Regression to a standard experience curve using 1989–2012 data yield a poor fit, with R 2 values of 0.17 for small batteries and 0.05 for larger systems. To address this problem, battery costs are separated into material and residual costs, and experience curves developed for residual costs. Depending on the year, residual costs account for 41–86% of total battery cost. Using running-time averages to address volatility in material costs, a 4-year time average experience curve for residual costs yield much higher R 2 , 0.78 for small and 0.74 for large lead-acid batteries. The learning rate for residual costs in lead-acid batteries is 20%, a discovery with policy implications. Neglecting to consider cost reductions in lead-acid batteries could result in failure of energy storage start-ups and public policy programs. Generalizing this result, learning in incumbent technologies must be understood to assess the potential of emerging ones. -- Highlights: •We analyze potential cost reductions in lead-acid batteries. •Modified experience curve for non-material costs gives good empirical fit. •Historical learning rate for non-material costs from 1985–2012 is 19–24%. •Progress in incumbent technology raises barrier to new entrants
-
Flexible circuits with integrated switches for robotic shape sensing
Harnett, C. K.
2016-05-01
Digital switches are commonly used for detecting surface contact and limb-position limits in robotics. The typical momentary-contact digital switch is a mechanical device made from metal springs, designed to connect with a rigid printed circuit board (PCB). However, flexible printed circuits are taking over from the rigid PCB in robotics because the circuits can bend while carrying signals and power through moving joints. This project is motivated by a previous work where an array of surface-mount momentary contact switches on a flexible circuit acted as an all-digital shape sensor compatible with the power resources of energy harvesting systems. Without a rigid segment, the smallest commercially-available surface-mount switches would detach from the flexible circuit after several bending cycles, sometimes violently. This report describes a low-cost, conductive fiber based method to integrate electromechanical switches into flexible circuits and other soft, bendable materials. Because the switches are digital (on/off), they differ from commercially-available continuous-valued bend/flex sensors. No amplification or analog-to-digital conversion is needed to read the signal, but the tradeoff is that the digital switches only give a threshold curvature value. Boundary conditions on the edges of the flexible circuit are key to setting the threshold curvature value for switching. This presentation will discuss threshold-setting, size scaling of the design, automation for inserting a digital switch into the flexible circuit fabrication process, and methods for reconstructing a shape from an array of digital switch states.
-
IGBT Dynamic Loss Reduction through Device Level Soft Switching
Directory of Open Access Journals (Sweden)
Lan Ma
2018-05-01
Full Text Available Due to its low conduction loss, hence high current ratings, as well as low cost, Silicon Insulated Gate Bipolar Transistor (Si IGBT is widely used in high power applications. However, its switching frequency is generally low because of relatively large switching losses. Silicon carbide Metal-Oxide-Semiconductor Field-Effect Transistor (SiC MOSFET is much more superior due to their fast switching speed, which is determined by the internal parasitic capacitance instead of the stored charges, like the IGBT. By the combination of SiC MOSFET and Si IGBT, this paper presents a novel series hybrid switching method to achieve IGBT’s dynamic switching loss reduction by switching under Zero Voltage Hard Current (ZVHC turn-on and Zero Current Hard Voltage (ZCHV turn-off conditions. Both simulation and experimental results of IGBT are carried out, which shows that the soft switching of IGBT has been achieved both in turn-on and turn-off period. Thus 90% turn-on loss and 57% turn-off loss are reduced. Two different IGBTs’ test results are also provided to study the modulation parameter’s effect on the turn-off switching loss. Furthermore, with the consideration of voltage and current transient states, a new soft switching classification is proposed. At last, another improved modulation and Highly Efficient and Reliable Inverter Concept (HERIC inverter are given to validate the effectiveness of the device level hybrid soft switching method application.
-
DEFF Research Database (Denmark)
Howard, Natasha; Guinness, Lorna; Rowland, Mark
2017-01-01
’ or cost-effective using WHO and comparison thresholds. Conclusions: Adding IRS was cost-effective in this moderate endemicity, low mortality setting. It was more cost-effective when transmission was highest, becoming less so as transmission reduced. Because vivax was three times more common than......Introduction: Financing of malaria control for displaced populations is limited in scope and duration, making cost-effectiveness analyses relevant but difficult. This study analyses cost-effectiveness of adding prevention through targeted indoor residual spraying (IRS) to case management in Afghan.......g. cases and DALYs averted) were derived and incremental cost-effectiveness ratios (ICERs) for cases prevented and DALYs averted calculated. Population, treatment cost, women’s time, days of productivity lost, case fatality rate, cases prevented, and DALY assumptions were tested in sensitivity analysis...
-
FAS: Using FPGA to Accelerate and Secure SDN Software Switches
Directory of Open Access Journals (Sweden)
Wenwen Fu
2018-01-01
Full Text Available Software-Defined Networking (SDN promises the vision of more flexible and manageable networks but requires certain level of programmability in the data plane to accommodate different forwarding abstractions. SDN software switches running on commodity multicore platforms are programmable and are with low deployment cost. However, the performance of SDN software switches is not satisfactory due to the complex forwarding operations on packets. Moreover, this may hinder the performance of real-time security on software switch. In this paper, we analyze the forwarding procedure and identify the performance bottleneck of SDN software switches. An FPGA-based mechanism for accelerating and securing SDN switches, named FAS (FPGA-Accelerated SDN software switch, is proposed to take advantage of the reconfigurability and high-performance advantages of FPGA. FAS improves the performance as well as the capacity against malicious traffic attacks of SDN software switches by offloading some functional modules. We validate FAS on an FPGA-based network processing platform. Experiment results demonstrate that the forwarding rate of FAS can be 44% higher than the original SDN software switch. In addition, FAS provides new opportunity to enhance the security of SDN software switches by allowing the deployment of bump-in-the-wire security modules (such as packet detectors and filters in FPGA.
-
Sequential effects in deduction: Cost of inference switch
Antonio González-Hernández; Carlos Santamaría; Orlando Espino; Sergio Moreno-Ríos; Emilio G. Milán
2010-01-01
El paradigma de cambio de tarea ha ayudado a los psicólogos a conocer los procesos involucrados en el cambio de una actividad a otra. La literatura aporta resultados consistentes sobre la reconfiguración necesaria para el cambio de tarea (desaparición abrupta del coste cuando el cambio es predecible vs. reducción gradual del coste en condiciones de cambio impredecible; componentes endógeno y exógeno del coste; asimetría del coste...). En la investigación que presentamos aquí mostramos los res...
-
Asymmetric switching in a homodimeric ABC transporter: a simulation study.
Directory of Open Access Journals (Sweden)
Jussi Aittoniemi
2010-04-01
Full Text Available ABC transporters are a large family of membrane proteins involved in a variety of cellular processes, including multidrug and tumor resistance and ion channel regulation. Advances in the structural and functional understanding of ABC transporters have revealed that hydrolysis at the two canonical nucleotide-binding sites (NBSs is co-operative and non-simultaneous. A conserved core architecture of bacterial and eukaryotic ABC exporters has been established, as exemplified by the crystal structure of the homodimeric multidrug exporter Sav1866. Currently, it is unclear how sequential ATP hydrolysis arises in a symmetric homodimeric transporter, since it implies at least transient asymmetry at the NBSs. We show by molecular dynamics simulation that the initially symmetric structure of Sav1866 readily undergoes asymmetric transitions at its NBSs in a pre-hydrolytic nucleotide configuration. MgATP-binding residues and a network of charged residues at the dimer interface are shown to form a sequence of putative molecular switches that allow ATP hydrolysis only at one NBS. We extend our findings to eukaryotic ABC exporters which often consist of two non-identical half-transporters, frequently with degeneracy substitutions at one of their two NBSs. Interestingly, many residues involved in asymmetric conformational switching in Sav1866 are substituted in degenerate eukaryotic NBS. This finding strengthens recent suggestions that the interplay of a consensus and a degenerate NBS in eukaroytic ABC proteins pre-determines the sequence of hydrolysis at the two NBSs.
-
Gollan, Tamar H.; Kleinman, Daniel; Wierenga, Christina E.
2014-01-01
The current study contrasted cued versus voluntary switching to investigate switching efficiency and possible sharing of control mechanisms across linguistic and non-linguistic domains. Bilinguals switched between naming pictures in Spanish versus English or between reading numbers aloud versus adding their digits, either without or with repetition of stimuli, and with fewer requirements as to when and how much they had to switch relative to previous instantiations of voluntary switching. Without repetition (Experiment 1), voluntary responses were faster than cued responses on both stay and switch trials (especially in the non-linguistic switching task), whereas in previous studies the voluntary advantage was restricted to switch-cost reduction. Similarly, when targets were presented repeatedly (Experiment 2), voluntary responses were faster overall for both linguistic and non-linguistic switching, though here the advantage tended to be larger on switch trials. Experiment 3 confirmed the overall voluntary speed advantage for the read-add task in monolinguals, and revealed a reduction in switch costs only for a different non-linguistic task (size-parity judgments). These results reveal greater overall advantages for voluntary over cued switching than previously reported, but also that the precise manifestation of the voluntary advantage can vary with different tasks. In the linguistic domain, lexical inaccessibility introduces some unique control mechanisms, and repetition may magnify cross-domain overlap in control mechanisms. Finally, under some limited conditions, cost-free switches were found in both linguistic and non-linguistic domains; however, suspension of top-down control may be restricted to language or highly automatic tasks. PMID:25313951
-
Combustion mode switching with a turbocharged/supercharged engine
Mond, Alan; Jiang, Li
2015-09-22
A method for switching between low- and high-dilution combustion modes in an internal combustion engine having an intake passage with an exhaust-driven turbocharger, a crankshaft-driven positive displacement supercharger downstream of the turbocharger and having variable boost controllable with a supercharger bypass valve, and a throttle valve downstream of the supercharger. The current combustion mode and mass air flow are determined. A switch to the target combustion mode is commanded when an operating condition falls within a range of predetermined operating conditions. A target mass air flow to achieve a target air-fuel ratio corresponding to the current operating condition and the target combustion mode is determined. The degree of opening of the supercharger bypass valve and the throttle valve are controlled to achieve the target mass air flow. The amount of residual exhaust gas is manipulated.
-
How L2-Learners' Brains React to Code-Switches: An ERP Study with Russian Learners of German
Ruigendijk, Esther; Hentschel, Gerd; Zeller, Jan Patrick
2016-01-01
This Event Related Potentials (ERP) study investigates auditory processing of sentences with so-called code-switches in Russian learners of German. It has often been argued that switching between two languages results in extra processing cost, although it is not completely clear yet what exactly causes these costs. ERP presents a good method to…
-
12 CFR 23.21 - Estimated residual value.
2010-01-01
... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Estimated residual value. 23.21 Section 23.21...) Leases § 23.21 Estimated residual value. (a) Recovery of investment and costs. A national bank's estimate of the residual value of the property that the bank relies upon to satisfy the requirements of a full...
-
40 Gbit/s NRZ Packet-Length Insensitive Header Extraction for Optical Label Switching Networks
DEFF Research Database (Denmark)
Seoane, Jorge; Kehayas, E; Avramopoulos, H.
2006-01-01
A simple method for 40 Gbit/s NRZ header extraction based on envelope detection for optical label switching networks is presented. The scheme is insensitive to packet length and spacing and can be single-chip integrated cost-effectively......A simple method for 40 Gbit/s NRZ header extraction based on envelope detection for optical label switching networks is presented. The scheme is insensitive to packet length and spacing and can be single-chip integrated cost-effectively...
-
Lien, Mei-Ching; Ruthruff, Eric
2004-01-01
This study examined how task switching is affected by hierarchical task organization. Traditional task-switching studies, which use a constant temporal and spatial distance between each task element (defined as a stimulus requiring a response), promote a flat task structure. Using this approach, Experiment 1 revealed a large switch cost of 238 ms.…
-
Methods for batch fabrication of cold cathode vacuum switch tubes
Walker, Charles A [Albuquerque, NM; Trowbridge, Frank R [Albuquerque, NM
2011-05-10
Methods are disclosed for batch fabrication of vacuum switch tubes that reduce manufacturing costs and improve tube to tube uniformity. The disclosed methods comprise creating a stacked assembly of layers containing a plurality of adjacently spaced switch tube sub-assemblies aligned and registered through common layers. The layers include trigger electrode layer, cathode layer including a metallic support/contact with graphite cathode inserts, trigger probe sub-assembly layer, ceramic (e.g. tube body) insulator layer, and metallic anode sub-assembly layer. Braze alloy layers are incorporated into the stacked assembly of layers, and can include active metal braze alloys or direct braze alloys, to eliminate costs associated with traditional metallization of the ceramic insulator layers. The entire stacked assembly is then heated to braze/join/bond the stack-up into a cohesive body, after which individual switch tubes are singulated by methods such as sawing. The inventive methods provide for simultaneously fabricating a plurality of devices as opposed to traditional methods that rely on skilled craftsman to essentially hand build individual devices.
-
Switch I-dependent allosteric signaling in a G-protein chaperone-B12 enzyme complex.
Campanello, Gregory C; Lofgren, Michael; Yokom, Adam L; Southworth, Daniel R; Banerjee, Ruma
2017-10-27
G-proteins regulate various processes ranging from DNA replication and protein synthesis to cytoskeletal dynamics and cofactor assimilation and serve as models for uncovering strategies deployed for allosteric signal transduction. MeaB is a multifunctional G-protein chaperone, which gates loading of the active 5'-deoxyadenosylcobalamin cofactor onto methylmalonyl-CoA mutase (MCM) and precludes loading of inactive cofactor forms. MeaB also safeguards MCM, which uses radical chemistry, against inactivation and rescues MCM inactivated during catalytic turnover by using the GTP-binding energy to offload inactive cofactor. The conserved switch I and II signaling motifs used by G-proteins are predicted to mediate allosteric regulation in response to nucleotide binding and hydrolysis in MeaB. Herein, we targeted conserved residues in the MeaB switch I motif to interrogate the function of this loop. Unexpectedly, the switch I mutations had only modest effects on GTP binding and on GTPase activity and did not perturb stability of the MCM-MeaB complex. However, these mutations disrupted multiple MeaB chaperone functions, including cofactor editing, loading, and offloading. Hence, although residues in the switch I motif are not essential for catalysis, they are important for allosteric regulation. Furthermore, single-particle EM analysis revealed, for the first time, the overall architecture of the MCM-MeaB complex, which exhibits a 2:1 stoichiometry. These EM studies also demonstrate that the complex exhibits considerable conformational flexibility. In conclusion, the switch I element does not significantly stabilize the MCM-MeaB complex or influence the affinity of MeaB for GTP but is required for transducing signals between MeaB and MCM. © 2017 by The American Society for Biochemistry and Molecular Biology, Inc.
-
Asymmetrical Switch Costs in Bilingual Language Production Induced by Reading Words
Peeters, David; Runnqvist, Elin; Bertrand, Daisy; Grainger, Jonathan
2014-01-01
We examined language-switching effects in French-English bilinguals using a paradigm where pictures are always named in the same language (either French or English) within a block of trials, and on each trial, the picture is preceded by a printed word from the same language or from the other language. Participants had to either make a language…
-
International Nuclear Information System (INIS)
Egbendewe-Mondzozo, Aklesso; Swinton, Scott M.; Izaurralde, César R.; Manowitz, David H.; Zhang, Xuesong
2011-01-01
This paper introduces a spatially-explicit bioeconomic model for the study of potential cellulosic biomass supply. For biomass crops to begin to replace current crops, farmers must earn more from them than from current crops. Using weather, topographic and soil data, the terrestrial ecosystem model, EPIC, dynamically simulates multiple cropping systems that vary by crop rotation, tillage, fertilization and residue removal rate. EPIC generates predicted crop yield and environmental outcomes over multiple watersheds. These EPIC results are used to parameterize a regional profit-maximization mathematical programming model that identifies profitable cropping system choices. The bioeconomic model is calibrated to 2007–09 crop production in a 9-county region of southwest Michigan. A simulation of biomass supply in response to rising biomass prices shows that cellulosic residues from corn stover and wheat straw begin to be supplied at minimum delivered biomass:corn grain price ratios of 0.15 and 0.18, respectively. At the mean corn price of $162.6/Mg ($4.13 per bushel) at commercial moisture content during 2007–2009, these ratios correspond to stover and straw prices of $24 and $29 per dry Mg. Perennial bioenergy crops begin to be supplied at price levels 2–3 times higher. Average biomass transport costs to the biorefinery plant range from $6 to $20/Mg compared to conventional crop production practices in the area, biomass supply from annual crop residues increased greenhouse gas emissions and reduced water quality through increased nutrient loss. By contrast, perennial cellulosic biomass crop production reduced greenhouse gas emissions and improved water quality. -- Highlights: ► A new bioeconomic model predicts biomass supply and its environmental impacts. ► The model captures the opportunity cost of switching to new cellulosic crops. ► Biomass from crop residues is supplied at lower biomass price than cellulosic crops. ► Biomass from cellulosic crops has
-
A prototype switched Ethernet data acquisition system
International Nuclear Information System (INIS)
Ye Gaoying; Deng Huichen; Chen Liaoyuan; Liu Li; Wang Xinhui
1999-01-01
A prototype switched Ethernet data acquisition system has been built up and successfully operated in HL-1M tokamak experiments. The system is based on a switched high bandwidth Ethernet network with which the CAMAC crates are directly interfaced. It takes the advanced features of LAN switch and Ethernet CAMAC controller (ECC 1365 MK III, HYTEC product) to avoid the rewriting of CAMAC driver for an individual computer system and to ensure high data transmission rate between CAMAC system and host computers on the network. It is a new approach to DAS system architecture and provides a solution for a well-known bottleneck problem in traditional distributed DAS system for fusion research. An average throughput of the test system reaches over 100 Mbps. The system features also an easy and low cost migration from traditional distributed DAS system. In the paper, the hardware configuration, software structure, performance of the system and the method of migrating from current DAS system are discussed in detail. (orig.)
-
Energy reversible switching from amorphous metal based nanoelectromechanical switch
Mayet, Abdulilah M.; Smith, Casey; Hussain, Muhammad Mustafa
2013-01-01
We report observation of energy reversible switching from amorphous metal based nanoelectromechanical (NEM) switch. For ultra-low power electronics, NEM switches can be used as a complementary switching element in many nanoelectronic system applications. Its inherent zero power consumption because of mechanical detachment is an attractive feature. However, its operating voltage needs to be in the realm of 1 volt or lower. Appropriate design and lower Young's modulus can contribute achieving lower operating voltage. Therefore, we have developed amorphous metal with low Young's modulus and in this paper reporting the energy reversible switching from a laterally actuated double electrode NEM switch. © 2013 IEEE.
-
Energy reversible switching from amorphous metal based nanoelectromechanical switch
Mayet, Abdulilah M.
2013-08-01
We report observation of energy reversible switching from amorphous metal based nanoelectromechanical (NEM) switch. For ultra-low power electronics, NEM switches can be used as a complementary switching element in many nanoelectronic system applications. Its inherent zero power consumption because of mechanical detachment is an attractive feature. However, its operating voltage needs to be in the realm of 1 volt or lower. Appropriate design and lower Young\\'s modulus can contribute achieving lower operating voltage. Therefore, we have developed amorphous metal with low Young\\'s modulus and in this paper reporting the energy reversible switching from a laterally actuated double electrode NEM switch. © 2013 IEEE.
-
Characterization of FGM micro-switches under electrostatic and Casimir forces
International Nuclear Information System (INIS)
Jia, X L; Kitipornchai, S; Yang, J
2010-01-01
This paper aims to investigate the nonlinear pull-in characteristics of the micro-switches made of either homogeneous material or non-homogeneous functionally graded material (FGM) with two material phases under the combined electrostatic and intermolecular Casimir force. Principle of virtual work is used to derive the governing differential equation which is then solved using differential quadrature method (DQM). Pull-in voltage and pull-in deflection are obtained for micro-switches with three different boundary conditions (i.e. fixed-fixed, simple-fixed, and simply supported). The present solutions are validated through direct comparisons with experimental and other existing results reported in previous studies. A parametric study is conducted to show the significant effects of material composition, gap ratio, slenderness ratio, Casimir force, axial residual stress on the pull-in instability.
-
Sequential effects in deduction: Cost of inference switch
Directory of Open Access Journals (Sweden)
Antonio González-Hernández
2010-01-01
Full Text Available El paradigma de cambio de tarea ha ayudado a los psicólogos a conocer los procesos involucrados en el cambio de una actividad a otra. La literatura aporta resultados consistentes sobre la reconfiguración necesaria para el cambio de tarea (desaparición abrupta del coste cuando el cambio es predecible vs. reducción gradual del coste en condiciones de cambio impredecible; componentes endógeno y exógeno del coste; asimetría del coste.... En la investigación que presentamos aquí mostramos los resultados de varios experimentos en los que estudiamos el proceso de reconfiguración que se produce al alternar entre Modus Ponens y Modus Tollens. Los resultados muestran que el cambio de una inferencia a otra produce un empeoramiento en el número de errores de los participantes, así como un aumento en los tiempos de reacción (coste por interferencia del cambio. Además, encontramos una mejora gradual en el Modus Tollens en secuencias no predecibles y con intervalos respuesta-estímulo largos, en los ensayos de repetición de tarea. Ambos resultados son compatibles con la hipótesis de la reconfiguración de tarea.
-
Micro optical fiber display switch based on the magnetohydrodynamic (MHD) principle
Lian, Kun; Heng, Khee-Hang
2001-09-01
This paper reports on a research effort to design, microfabricate and test an optical fiber display switch based on magneto hydrodynamic (MHD) principal. The switch is driven by the Lorentz force and can be used to turn on/off the light. The SU-8 photoresist and UV light source were used for prototype fabrication in order to lower the cost. With a magnetic field supplied by an external permanent magnet, and a plus electrical current supplied across the two inert sidewall electrodes, the distributed body force generated will produce a pressure difference on the fluid mercury in the switch chamber. By change the direction of current flow, the mercury can turn on or cut off the light pass in less than 10 ms. The major advantages of a MHD-based micro-switch are that it does not contain any solid moving parts and power consumption is much smaller comparing to the relay type switches. This switch can be manufactured by molding gin batch production and may have potential applications in extremely bright traffic control,, high intensity advertising display, and communication.
-
Line Capacity Expansion and Transmission Switching in Power Systems With Large-Scale Wind Power
DEFF Research Database (Denmark)
Villumsen, Jonas Christoffer; Bronmo, Geir; Philpott, Andy B.
2013-01-01
In 2020 electricity production from wind power should constitute nearly 50% of electricity demand in Denmark. In this paper we look at optimal expansion of the transmission network in order to integrate 50% wind power in the system, while minimizing total fixed investment cost and expected cost...... of power generation. We allow for active switching of transmission elements to reduce congestion effects caused by Kirchhoff's voltage law. Results show that actively switching transmission lines may yield a better utilization of transmission networks with large-scale wind power and increase wind power...
-
An electromagnetically actuated fiber optic switch using magnetized ferromagnetic materials
Pandojirao-S, Praveen; Dhaubanjar, Naresh; Phuyal, Pratibha C.; Chiao, Mu; Chiao, J.-C.
2008-03-01
This paper presents the design, fabrication and testing of a fiber optic switch actuated electromagnetically. The ferromagnetic gel coated optical fiber is actuated using external electromagnetic fields. The ferromagnetic gel consists of ferromagnetic powders dispersed in epoxy. The fabrication utilizes a simple cost-effective coating setup. A direct fiberto-fiber alignment eliminates the need for complementary optical parts and the displacement of fiber switches the laser coupling. The magnetic characteristics of magnetized ferromagnetic materials are performed using alternating gradient magnetometer and the magnetic hysteresis curves are measured for different ferromagnetic materials including iron, cobalt, and nickel. Optical fiber switches with various fiber lengths are actuated and their static and dynamic responses for the same volume of ferromagnetic gel are summarized. The highest displacement is 1.345 mm with an input current of 260mA. In this paper, the performance of fiber switches with various coating materials is presented.
-
International Nuclear Information System (INIS)
Billault, P.; Riege, H.; Gulik, M. van; Boggasch, E.; Frank, K.
1987-01-01
The pseudospark discharge is bound to a geometrical structure which is particularly well suited for switching high currents and voltages at high power levels. This type of discharge offers the potential for improvement in essentially all areas of switching operation: peak current and current density, current rise, stand-off voltage, reverse current capability, cathode life, and forward drop. The first pseudospark switch was built at CERN at 1981. Since then, the basic switching characteristics of pseudospark chambers have been studied in detail. The main feature of a pseudospark switch is the confinement of the discharge plasma to the device axis. The current transition to the hollow electrodes is spread over a rather large surface area. Another essential feature is the easy and precise triggering of the pseudospark switch from the interior of the hollow electrodes, relatively far from the main discharge gap. Nanosecond delay and jitter values can be achieved with trigger energies of less than 0.1 mJ, although cathode heating is not required. Pseudospark gaps may cover a wide range of high-voltage, high-current, and high-pulse-power switching at repetition rates of many kilohertz. This report reviews the basic researh on pseudospark switches which has been going on at CERN. So far, applications have been developed in the range of thyratron-like medium-power switches at typically 20 to 40 kV and 0.5 to 10 kA. High-current pseudospark switches have been built for a high-power 20 kJ pulse generator which is being used for long-term tests of plasma lenses developed for the future CERN Antiproton Collector (ACOL). The high-current switches have operated for several hundred thousand shots, with 20 to 50 ns jitter at 16 kV charging voltage and more than 100 kA peak current amplitude. (orig.)
-
Synchronization Between Two Different Switched Chaotic Systems By Switching Control
Directory of Open Access Journals (Sweden)
Du Li Ming
2016-01-01
Full Text Available This paper is concerned with the synchronization problem of two different switched chaotic systems, considering the general case that the master-slave switched chaotic systems have uncertainties. Two basic problems are considered: one is projective synchronization of switched chaotic systems under arbitrary switching; the other is projective synchronization of switched chaotic systems by design of switching when synchronization cannot achieved by using any subsystems alone. For the two problems, common Lyapunov function method and multiple Lyapunov function method are used respectively, an adaptive control scheme has been presented, some sufficient synchronization conditions are attainted, and the switching signal is designed. Finally, the numerical simulation is provide to show the effectiveness of our method.
-
Mcpeak, W. L.
1975-01-01
A new exciter switch assembly has been installed at the three DSN 64-m deep space stations. This assembly provides for switching Block III and Block IV exciters to either the high-power or 20-kW transmitters in either dual-carrier or single-carrier mode. In the dual-carrier mode, it provides for balancing the two drive signals from a single control panel located in the transmitter local control and remote control consoles. In addition to the improved switching capabilities, extensive monitoring of both the exciter switch assembly and Transmitter Subsystem is provided by the exciter switch monitor and display assemblies.
-
Directory of Open Access Journals (Sweden)
Serkan AYDIN
2004-01-01
Full Text Available Recently customer loyalty has appeared as a factor for obtaining sustainable competitive advantage. A firm, desiring to customers’ loyalty, should provide customer satisfaction and acquire its customers’ trust. On the other hand, though customer switching cost has a potential importance for loyalty, it’s seen that studies about the effect of customer switching cost on loyalty have been very limited. In this context, current study’s aim is to examine the customer switching costs’ effect on loyalty in GSM sector. For this reason, data, containing 1662 GSM users, was formed via questionnaire. Findings, obtained analyzing of data with regression analysis, shows that customer switching cost plays a significant role (moderator effect in positive effect of both customer satisfaction and trust on loyalty
-
A Switch Is Not a Switch: Syntactically-Driven Bilingual Language Control
Gollan, Tamar H.; Goldrick, Matthew
2018-01-01
The current study investigated the possibility that language switches could be relatively automatically triggered by context. "Single-word switches," in which bilinguals switched languages on a single word in midsentence and then immediately switched back, were contrasted with more complete "whole-language switches," in which…
-
Switching Phenomena in a System with No Switches
Preis, Tobias; Stanley, H. Eugene
2010-02-01
It is widely believed that switching phenomena require switches, but this is actually not true. For an intriguing variety of switching phenomena in nature, the underlying complex system abruptly changes from one state to another in a highly discontinuous fashion. For example, financial market fluctuations are characterized by many abrupt switchings creating increasing trends ("bubble formation") and decreasing trends ("financial collapse"). Such switching occurs on time scales ranging from macroscopic bubbles persisting for hundreds of days to microscopic bubbles persisting only for a few seconds. We analyze a database containing 13,991,275 German DAX Future transactions recorded with a time resolution of 10 msec. For comparison, a database providing 2,592,531 of all S&P500 daily closing prices is used. We ask whether these ubiquitous switching phenomena have quantifiable features independent of the time horizon studied. We find striking scale-free behavior of the volatility after each switching occurs. We interpret our findings as being consistent with time-dependent collective behavior of financial market participants. We test the possible universality of our result by performing a parallel analysis of fluctuations in transaction volume and time intervals between trades. We show that these financial market switching processes have properties similar to those of phase transitions. We suggest that the well-known catastrophic bubbles that occur on large time scales—such as the most recent financial crisis—are no outliers but single dramatic representatives caused by the switching between upward and downward trends on time scales varying over nine orders of magnitude from very large (≈102 days) down to very small (≈10 ms).
-
Xu, Jiayuan; Yu, Chengtao; Bo, Bin; Xue, Yu; Xu, Changfu; Chaminda, P. R. Dushantha; Hu, Chengbo; Peng, Kai
2018-03-01
The automatic recognition of the high voltage isolation switch by remote video monitoring is an effective means to ensure the safety of the personnel and the equipment. The existing methods mainly include two ways: improving monitoring accuracy and adopting target detection technology through equipment transformation. Such a method is often applied to specific scenarios, with limited application scope and high cost. To solve this problem, a high voltage isolation switch state recognition method based on background difference and iterative search is proposed in this paper. The initial position of the switch is detected in real time through the background difference method. When the switch starts to open and close, the target tracking algorithm is used to track the motion trajectory of the switch. The opening and closing state of the switch is determined according to the angle variation of the switch tracking point and the center line. The effectiveness of the method is verified by experiments on different switched video frames of switching states. Compared with the traditional methods, this method is more robust and effective.
-
Switching strategies to optimize search
International Nuclear Information System (INIS)
Shlesinger, Michael F
2016-01-01
Search strategies are explored when the search time is fixed, success is probabilistic and the estimate for success can diminish with time if there is not a successful result. Under the time constraint the problem is to find the optimal time to switch a search strategy or search location. Several variables are taken into account, including cost, gain, rate of success if a target is present and the probability that a target is present. (paper: interdisciplinary statistical mechanics)
-
Ganther-Urmie, Julie M; Nair, Kavita V; Valuck, Robert; McCollum, Marianne; Lewis, Sonya J; Turpin, Robin S
2004-03-01
To examine patient attitudes related to formulary medications and medication-related decision making in multitier copayment prescription drug plans. A cross-sectional retrospective analysis. Data were collected via mail survey from a random sample of 25,008 members of a managed care organization. The selected members were enrolled in a variety of 2- and 3-tier copayment plans and were taking prescription medication to treat 1 or more of 5 chronic disease states. Most respondents did not believe that formulary drugs were safer or more effective than nonformulary drugs, but 39.7% thought that formulary drugs were relatively less expensive. Most respondents appeared willing to consider switching from a nonformulary drug to a formulary drug with a lower copayment. The percent of respondents who reported they would be very unlikely or unlikely to switch was only 15.3% for a new prescription and 24.2% for a refill prescription. Medication efficacy and physician opinion were important factors in plan members' switching decisions. Cost was an important factor for some members, but older plan members were less likely to report that cost was important. Multitier plan members generally believed that drugs are placed on the formulary for reasons of cost rather than safety or efficacy. Most plan members were receptive to switching from a nonformulary to a formulary medication, but financial incentives alone may not convince some plan members to make the switch.
-
Energy Technology Data Exchange (ETDEWEB)
Lima, R.C.O.; Lira, H.L.; Neves, G.A.; Silva, M.C.; Silva, C.D., E-mail: rosacolima@yahoo.com.br [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Unidade Academica de Engenharia de Materiais
2011-07-01
A prominent application of bentonite clays is to obtain organoclays for use in polymer nanocomposites. In Brazil, there are Membranes are thin structures that allow the phase separation of a substance through the transport of certain chemical species. Ceramic membranes present several advantages in relation to others materials, including longer lifetime, better clean facility, chemical and biological stability and high temperature and pressure resistance, its use is limited, however, by the high cost of fabrication. The search for raw materials of low cost is necessary. Combining the demands of the market with environmental concerns, the aim of this work is to make use of granite sawing residue to prepare tubular ceramic membranes of low cost. Firstly the granite residue was characterized by particle size distribution, chemical analysis by X-ray fluorescence and X-ray diffraction. The membranes were prepared with bentonite clay (35%), quartz (35%) and granite residue (30%) and sintering at temperatures of 750, 800, 850 and 900 deg C and characterized by scanning electron microscopy, mercury porosimetry and permeate water flux. The results showed that the granite residue present average particle size of 18.46μm and high content of silica and alumina. The membranes present average pore size between microfiltration and ultrafiltration and permeate water flux from 10.0 to 20.0 L/h.m{sup 2}. (author)
-
Proceedings of the 7. biennial residue-to-revenue residual wood conference 2007
International Nuclear Information System (INIS)
Raulin, J.
2007-01-01
This conference provided information on the highest and best use of residual wood, which is quickly becoming a valuable commodity. Issues concerning forest residues, sawmill wastes, agricultural residues and urban organic materials were discussed along with trends in Canadian surplus mill waste production. The evolving nature and technologies of the biomass business were highlighted with particular focus on how to generate energy and save money through the use of residual wood. Residual wood energy projects and developments in Canada, North America and Europe were outlined along with biomass development in relation to forest fires and insect disturbances. Cogeneration technologies using wood wastes for thermal heat, steam and electricity were also presented, along with transportation fuel technologies for the production of ethanol. It was noted that with the rising cost of energy, the forest industry is seeking energy solutions based on the use of residual wood. The range of economically practical residual wood solutions continues to grow as energy prices increase. The conference was attended by more than 200 delegates from the forest industry, suppliers and government representatives, to discuss policies and procedures currently in place. Industry investment is being stimulated by the potential for biofuels and biochemicals, as well as the co-operation between the forest and energy sectors. The conference featured 23 presentations, of which 12 have been catalogued separately for inclusion in this database. refs., tabs., figs
-
Residual extrapolation operators for efficient wavefield construction
Alkhalifah, Tariq Ali
2013-02-27
Solving the wave equation using finite-difference approximations allows for fast extrapolation of the wavefield for modelling, imaging and inversion in complex media. It, however, suffers from dispersion and stability-related limitations that might hamper its efficient or proper application to high frequencies. Spectral-based time extrapolation methods tend to mitigate these problems, but at an additional cost to the extrapolation. I investigate the prospective of using a residual formulation of the spectral approach, along with utilizing Shanks transform-based expansions, that adheres to the residual requirements, to improve accuracy and reduce the cost. Utilizing the fact that spectral methods excel (time steps are allowed to be large) in homogeneous and smooth media, the residual implementation based on velocity perturbation optimizes the use of this feature. Most of the other implementations based on the spectral approach are focussed on reducing cost by reducing the number of inverse Fourier transforms required in every step of the spectral-based implementation. The approach here fixes that by improving the accuracy of each, potentially longer, time step.
-
Simulating greenhouse gas (GHG) allowance cost and GHG emission reduction in Western Europe
International Nuclear Information System (INIS)
Delarue, Erik; Lamberts, Hans; D'haeseleer, William
2007-01-01
Due to the growing concern for global warming, the EU25 have implemented the European Union Greenhouse Gas Emission Trading Scheme (EU ETS). In the first trading period (2005-2007), part of the targeted GHG emission reductions presumably will have to result from a switch from coal fired electricity generation to gas fired electricity generation. It is possible to calculate the allowance cost necessary to switch a certain coal fired plant with a certain gas fired plant in the merit order. The allowance cost obtained is a so called switching point. When comparing historic European Union Allowance (EUA) prices (2005) with the corresponding historic switching points, the EUA prices were found high enough to cause a certain switch in the summer season. This finding leads to the use of switching points in establishing allowance cost profiles for several scenarios. A variable gas price profile is used in the simulation tool E-Simulate to simulate electricity generation and related GHG emissions in an eight zonal model representing Western Europe. Several GHG allowance cost profile scenarios are examined. For each scenario, electricity generation in the considered countries is clarified. The focus however lies on the GHG emission reduction potentials. These potentials are addressed for each scenario
-
EDITORIAL: Molecular switches at surfaces Molecular switches at surfaces
Weinelt, Martin; von Oppen, Felix
2012-10-01
In nature, molecules exploit interaction with their environment to realize complex functionalities on the nanometer length scale. Physical, chemical and/or biological specificity is frequently achieved by the switching of molecules between microscopically different states. Paradigmatic examples are the energy production in proton pumps of bacteria or the signal conversion in human vision, which rely on switching molecules between different configurations or conformations by external stimuli. The remarkable reproducibility and unparalleled fatigue resistance of these natural processes makes it highly desirable to emulate nature and develop artificial systems with molecular functionalities. A promising avenue towards this goal is to anchor the molecular switches at surfaces, offering new pathways to control their functional properties, to apply electrical contacts, or to integrate switches into larger systems. Anchoring at surfaces allows one to access the full range from individual molecular switches to self-assembled monolayers of well-defined geometry and to customize the coupling between molecules and substrate or between adsorbed molecules. Progress in this field requires both synthesis and preparation of appropriate molecular systems and control over suitable external stimuli, such as light, heat, or electrical currents. To optimize switching and generate function, it is essential to unravel the geometric structure, the electronic properties and the dynamic interactions of the molecular switches on surfaces. This special section, Molecular Switches at Surfaces, collects 17 contributions describing different aspects of this research field. They analyze elementary processes, both in single molecules and in ensembles of molecules, which involve molecular switching and concomitant changes of optical, electronic, or magnetic properties. Two topical reviews summarize the current status, including both challenges and achievements in the field of molecular switches on
-
Design And Implementation Of Cost Effective Inverter
Directory of Open Access Journals (Sweden)
Niaz Morshedul Haque
2017-10-01
Full Text Available This paper deals with the design and construct of a 100 Watt 220 Volt and 50 Hz Inverter. The system is designed without any microcontroller and it has a cost-effective design architecture. The elementary purpose of this device is to transmute 12 V DC to 220 V AC. Snubber technology is used to diminish the reverse potential transients and excessive heat of transformer winding and transistor switches. Switching pulse generated by NE 555 timer circuit and comparator circuit was used to take signal strength input from its rear as well as from both sides for triggering the MOSFET switches. Another switch is used to invert pulse between two switching circuitries. A 5 volts regulator IC 7805 was used to supply fixed 5V for biasing the switching and amplifying circuitry.
-
2010-01-01
... 12 Banks and Banking 6 2010-01-01 2010-01-01 false What is required if you rely on an estimated residual value greater than 25% of the original cost of the leased property? 714.5 Section 714.5 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION REGULATIONS AFFECTING CREDIT UNIONS LEASING § 714.5 What is...
-
Multiuser hybrid switched-selection diversity systems
Shaqfeh, Mohammad
2011-09-01
A new multiuser scheduling scheme is proposed and analyzed in this paper. The proposed system combines features of conventional full-feedback selection-based diversity systems and reduced-feedback switch-based diversity systems. The new hybrid system provides flexibility in trading-off the channel information feedback overhead with the prospected multiuser diversity gains. The users are clustered into groups, and the users\\' groups are ordered into a sequence. Per-group feedback thresholds are used and optimized to maximize the system overall achievable rate. The proposed hybrid system applies switched diversity criterion to choose one of the groups, and a selection criterion to decide the user to be scheduled from the chosen group. Numerical results demonstrate that the system capacity increases as the number of users per group increases, but at the cost of more required feedback messages. © 2011 IEEE.
-
Leenaars, Cathalijn H C; Joosten, Ruud N J M A; Zwart, Allard; Sandberg, Hans; Ruimschotel, Emma; Hanegraaf, Maaike A J; Dematteis, Maurice; Feenstra, Matthijs G P; van Someren, Eus J W
2012-02-01
Task-switching is an executive function involving the prefrontal cortex. Switching temporarily attenuates the speed and/or accuracy of performance, phenomena referred to as switch costs. In accordance with the idea that prefrontal function is particularly sensitive to sleep loss, switch-costs increase during prolonged waking in humans. It has been difficult to investigate the underlying neurobiological mechanisms because of the lack of a suitable animal model. Here, we introduce the first switch-task for rats and report the effects of sleep deprivation and inactivation of the medial prefrontal cortex. Rats were trained to repeatedly switch between 2 stimulus-response associations, indicated by the presentation of a visual or an auditory stimulus. These stimulus-response associations were offered in blocks, and performance was compared for the first and fifth trials of each block. Performance was tested after exposure to 12 h of total sleep deprivation, sleep fragmentation, and their respective movement control conditions. Finally, it was tested after pharmacological inactivation of the medial prefrontal cortex. Controlled laboratory settings. 15 male Wistar rats. Both accuracy and latency showed switch-costs at baseline. Twelve hours of total sleep deprivation, but not sleep fragmentation, impaired accuracy selectively on the switch-trials. Inactivation of the medial prefrontal cortex by local neuronal inactivation resulted in an overall decrease in accuracy. We developed and validated a switch-task that is sensitive to sleep deprivation. This introduces the possibility for in-depth investigations on the neurobiological mechanisms underlying executive impairments after sleep disturbance in a rat model.
-
Wang, Chunjie; Geng, Fengji; Yao, Yuan; Weng, Jian; Hu, Yuzheng; Chen, Feiyan
2015-01-01
Our previous work demonstrated that abacus-based mental calculation (AMC), a traditional Chinese calculation method, could help children improve their math abilities (e.g. basic arithmetical ability) and executive function (e.g. working memory). This study further examined the effects of long-term AMC training on math ability in visual-spatial domain and the task switching component of executive function. More importantly, this study investigated whether AMC training modulated the relationship between math abilities and task switching. The participants were seventy 7-year-old children who were randomly assigned into AMC and control groups at primary school entry. Children in AMC group received 2-hour AMC training every week since primary school entry. On the contrary, children in the control group had never received any AMC training. Math and task switching abilities were measured one year and three years respectively after AMC training began. The results showed that AMC children performed better than their peers on math abilities in arithmetical and visual-spatial domains. In addition, AMC group responded faster than control group in the switching task, while no group difference was found in switch cost. Most interestingly, group difference was present in the relationships between math abilities and switch cost. These results implied the effect of AMC training on math abilities as well as its relationship with executive function.
-
Directory of Open Access Journals (Sweden)
Chunjie Wang
Full Text Available Our previous work demonstrated that abacus-based mental calculation (AMC, a traditional Chinese calculation method, could help children improve their math abilities (e.g. basic arithmetical ability and executive function (e.g. working memory. This study further examined the effects of long-term AMC training on math ability in visual-spatial domain and the task switching component of executive function. More importantly, this study investigated whether AMC training modulated the relationship between math abilities and task switching. The participants were seventy 7-year-old children who were randomly assigned into AMC and control groups at primary school entry. Children in AMC group received 2-hour AMC training every week since primary school entry. On the contrary, children in the control group had never received any AMC training. Math and task switching abilities were measured one year and three years respectively after AMC training began. The results showed that AMC children performed better than their peers on math abilities in arithmetical and visual-spatial domains. In addition, AMC group responded faster than control group in the switching task, while no group difference was found in switch cost. Most interestingly, group difference was present in the relationships between math abilities and switch cost. These results implied the effect of AMC training on math abilities as well as its relationship with executive function.
-
Differential preparation intervals modulate repetition processes in task switching: an ERP study
Directory of Open Access Journals (Sweden)
Min eWang
2016-02-01
Full Text Available In task-switching paradigms, reaction times (RTs switch cost (SC and the neural correlates underlying the SC are affected by different preparation intervals. However, little is known about the effect of the preparation interval on the repetition processes in task-switching. To examine this effect we utilized a cued task-switching paradigm with long sequences of repeated trials. Response-stimulus intervals (RSI and cue-stimulus intervals (CSI were manipulated in short and long conditions. Electroencephalography (EEG and behavioral data were recorded. We found that with increasing repetitions, RTs were faster in the short CSI conditions, while P3 amplitudes decreased in the LS (long RSI and short CSI conditions. Positive correlations between RT benefit and P3 activation decrease (repeat 1 minus repeat 5, and between the slope of the RT and P3 regression lines were observed only in the LS condition. Our findings suggest that differential preparation intervals modulate repetition processes in task switching.
-
Evaluation of resource recovery from waste incineration residues--the case of zinc.
Fellner, J; Lederer, J; Purgar, A; Winterstetter, A; Rechberger, H; Winter, F; Laner, D
2015-03-01
Solid residues generated at European Waste to Energy plants contain altogether about 69,000 t/a of Zn, of which more than 50% accumulates in air pollution control residues, mainly boiler and filter ashes. Intensive research activities aiming at Zn recovery from such residues recently resulted in a technical scale Zn recovery plant at a Swiss waste incinerator. By acidic leaching and subsequent electrolysis this technology (FLUREC) allows generating metallic Zn of purity>99.9%. In the present paper the economic viability of the FLUREC technology with respect to Zn recovery from different solid residues of waste incineration has been investigated and subsequently been categorised according to the mineral resource classification scheme of McKelvey. The results of the analysis demonstrate that recovery costs for Zn are highly dependent on the costs for current fly ash disposal (e.g. cost for subsurface landfilling). Assuming current disposal practice costs of 220€/ton fly ash, resulting recovery costs for Zn are generally higher than its current market price of 1.6€/kg Zn. With respect to the resource classification this outcome indicates that none of the identified Zn resources present in incineration residues can be economically extracted and thus cannot be classified as a reserve. Only for about 4800 t/a of Zn an extraction would be marginally economic, meaning that recovery costs are only slightly (less than 20%) higher than the current market price for Zn. For the remaining Zn resources production costs are between 1.5 and 4 times (7900 t/a Zn) and 10-80 times (55,300 t/a Zn) higher than the current market value. The economic potential for Zn recovery from waste incineration residues is highest for filter ashes generated at grate incinerators equipped with wet air pollution control. Copyright © 2014 Elsevier Ltd. All rights reserved.
-
Transient-Switch-Signal Suppressor
Bozeman, Richard J., Jr.
1995-01-01
Circuit delays transmission of switch-opening or switch-closing signal until after preset suppression time. Used to prevent transmission of undesired momentary switch signal. Basic mode of operation simple. Beginning of switch signal initiates timing sequence. If switch signal persists after preset suppression time, circuit transmits switch signal to external circuitry. If switch signal no longer present after suppression time, switch signal deemed transient, and circuit does not pass signal on to external circuitry, as though no transient switch signal. Suppression time preset at value large enough to allow for damping of underlying pressure wave or other mechanical transient.
-
Performance Test of Openflow Agent on Openflow Software-Based Mikrotik RB750 Switch
Directory of Open Access Journals (Sweden)
Rikie Kartadie
2016-11-01
Full Text Available A network is usually developed by several devices such as router, switch etc. Every device forwards data package manipulation with complicated protocol planted in its hardware. An operator is responsible for running configuration either to manage rules or application applied in the network. Human error may occur when device configuration run manually by operator. Some famous vendors, one of them is MikroTik, has also been implementing this OpenFlow on its operation. It provides the implementation of SDN/OpenFlow architecture with affordable cost. The second phase research result showed that switch OF software-based MikroTik resulted higher latency value than both mininet and switch OF software-based OpenWRT. The average gap value of switch OF software-based MikroTik is 2012 kbps lower than the value of switch OF software-based OpenWRT. The average gap value of throughput bandwidth protocol UDP switch OF software-based MikroTik is 3.6176 kBps lower than switch OF software-based OpenWRT and it is 8.68 kBps lower than mininet. The average gap throughput jitter protokol UDP of switch OF software-based MiktoTik is 0.0103ms lower than switch OF software-based OpenWRT and 0.0093ms lower than mininet.
-
Polyaniline-based memristive microdevice with high switching rate and endurance
Lapkin, D. A.; Emelyanov, A. V.; Demin, V. A.; Erokhin, V. V.; Feigin, L. A.; Kashkarov, P. K.; Kovalchuk, M. V.
2018-01-01
Polyaniline (PANI) based memristive devices have emerged as promising candidates for hardware implementation of artificial synapses (the key components of neuromorphic systems) due to their high flexibility, low cost, solution processability, three-dimensional stacking capability, and biocompatibility. Here, we report on a way of the significant improvement of the switching rate and endurance of PANI-based memristive devices. The reduction of the PANI active channel dimension leads to the increase in the resistive switching rate by hundreds of times in comparison with the conventional one. The miniaturized memristive device was shown to be stable within at least 104 cyclic switching events between high- and low-conductive states with a retention time of at least 103 s. The obtained results make PANI-based memristive devices potentially widely applicable in neuromorphic systems.
-
Biotin Switch Assays for Quantitation of Reversible Cysteine Oxidation.
Li, R; Kast, J
2017-01-01
Thiol groups in protein cysteine residues can be subjected to different oxidative modifications by reactive oxygen/nitrogen species. Reversible cysteine oxidation, including S-nitrosylation, S-sulfenylation, S-glutathionylation, and disulfide formation, modulate multiple biological functions, such as enzyme catalysis, antioxidant, and other signaling pathways. However, the biological relevance of reversible cysteine oxidation is typically underestimated, in part due to the low abundance and high reactivity of some of these modifications, and the lack of methods to enrich and quantify them. To facilitate future research efforts, this chapter describes detailed procedures to target the different modifications using mass spectrometry-based biotin switch assays. By switching the modification of interest to a biotin moiety, these assays leverage the high affinity between biotin and avidin to enrich the modification. The use of stable isotope labeling and a range of selective reducing agents facilitate the quantitation of individual as well as total reversible cysteine oxidation. The biotin switch assay has been widely applied to the quantitative analysis of S-nitrosylation in different disease models and is now also emerging as a valuable research tool for other oxidative cysteine modifications, highlighting its relevance as a versatile, robust strategy for carrying out in-depth studies in redox proteomics. © 2017 Elsevier Inc. All rights reserved.
-
Gain-switched all-fiber laser with narrow bandwidth
DEFF Research Database (Denmark)
Larsen, Casper; Giesberts, M.; Nyga, S.
2013-01-01
pulse energy is 20 μJ in a duration of 135 ns at 7 kHz. The bandwidth increases for a higher pump pulse energy and repetition rate, and this sets the limit of the output pulse energy. A single power amplifier is added to raise the peak power to the kW-level and the pulse energy to 230 μJ while keeping......Gain-switching of a CW fiber laser is a simple and cost-effective approach to generate pulses using an all-fiber system. We report on the construction of a narrow bandwidth (below 0.1 nm) gain-switched fiber laser and optimize the pulse energy and pulse duration under this constraint. The extracted...
-
Switch evaluation test system for the National Ignition Facility
International Nuclear Information System (INIS)
Savage, M.E.; Simpson, W.W.; Reynolds, F.D.
1997-01-01
Flashlamp pumped lasers use pulsed power switches to commute energy stored in capacitor banks to the flashlamps. The particular application in which the authors are interested is the National Ignition Facility (NIF), being designed by Lawrence Livermore National Laboratory, Los Alamos National Laboratory, and Sandia National Laboratories (SNL). To lower the total cost of these switches, SNL has a research program to evaluate large closing switches. The target value of the energy switched by a single device is 1.6 MJ, from a 6 mF, 24kV capacitor bank. The peak current is 500 kA. The lifetime of the NIF facility is 24,000 shots. There is no switch today proven at these parameters. Several short-lived switches (100's of shots) exist that can handle the voltage and current, but would require maintenance during the facility life. Other type devices, notably ignitrons, have published lifetimes in excess of 20,000 shots, but at lower currents and shorter pulse widths. The goal of the experiments at SNL is to test switches with the full NIF wave shape, and at the correct voltage. The SNL facility can provide over 500 kA at 24 kV charge voltage. the facility has 6.4 mF total capacitance, arranged in 25 sub-modules. the modular design makes the facility more flexible (for possible testing at lower current) and safer. For pulse shaping (the NIF wave shape is critically damped) there is an inductor and resistor for each of the 25 modules. Rather than one large inductor and resistor, this lowers the current in the pulse shaping components, and raises their value to those more easily attained with lumped inductors and resistors. The authors show the design of the facility, and show results from testing conducted thus far. They also show details of the testing plan for high current switches
-
Energy Technology Data Exchange (ETDEWEB)
Heydari, H.; Faghihi, F.; Abbasi, V. [Iran Univ. of Science and Technology, Narmak, Tehran (Iran, Islamic Republic of). Center of Excellence for Power System Automation and Operation
2007-07-01
High performance and correct functionality of equipment that operate in high voltage substations during transient states need careful engineering design. To achieve electromagnetic compatibility (EMC) in a system, it is necessary to correct design problems and to use special methods like shielding, grounding and filtering which cause an increase in overall cost. This paper discussed a study of a medium voltage substation whose switching process caused electromagnetic interference to low voltage cables. Three methods of decreasing overvoltage and overcurrent were discussed and compared. Recognition of magnetic fields was accomplished by ANSYS (base on finite element method). In addition, overvoltages during the switching process were calculated by common mode and differential mode equivalent circuit. The purpose of the study was to assist designers and engineers in selecting a suitable method to achieve electromagnetic compatibility in a substation. The paper discussed the amplitude of switching currents; common mode current; and methods of reducing overvoltages and overcurrents. These methods included differential mode current and shielding. It was concluded that several methods exist to protect a substations against electromagnetic interference effects. An important problem is the structure of switching in a substation that determines the strength of electromagnetic interference. A substation designer can chose the best way to achieve EMC by considering a switching structure that depends on system topology and cost function of the selected method. 7 refs., 17 figs.
-
Pan, Min; Plummer, Andrew
2018-06-01
This paper reviews recent developments in digital switched hydraulics particularly the switched inertance hydraulic systems (SIHSs). The performance of SIHSs is presented in brief with a discussion of several possible configurations and control strategies. The soft switching technology and high-speed switching valve design techniques are discussed. Challenges and recommendations are given based on the current research achievements.
-
Energy Technology Data Exchange (ETDEWEB)
Golde, Karsten
2016-06-24
By means of superconducting equipment it is possible to reduce the transmission losses in distribution networks while increasing the transmission capacity. As a result even saving a superimposed voltage level would be possible, which can put higher investment costs compared to conventional equipment into perspective. For operation of superconducting systems it is necessary to integrate all equipment in the cooling circuit. This also includes switchgears. Due to cooling with liquid nitrogen, however, only vacuum switching technology comes into question. Thus, the suitability of vacuum switches is investigated in this work. For this purpose the mechanics of the interrupters is considered first. Material investigations and switching experiments at ambient temperature and in liquid nitrogen supply information on potential issues. For this purpose, a special pneumatic construction is designed, which allows tens of thousands of switching cycles. Furthermore, the electrical resistance of the interrupters is considered. Since the contact system consists almost exclusively of copper, a remaining residual resistance and appropriate thermal losses must be considered. Since they have to be cooled back, an appropriate evaluation is given taking environmental parameters into account. The dielectric strength of vacuum interrupters is considered both at ambient temperature as well as directly in liquid nitrogen. For this purpose different contact distances are set at different interrupter types. A distinction is made between internal and external dielectric strength. Conditioning and deconditioning effects are minimized by an appropriate choice of the test circuit. The current chopping and resulting overvoltages are considered to be one of the few drawbacks of vacuum switching technology. Using a practical test circuit the height of chopping current is determined and compared for different temperatures. Due to strong scattering the evaluation is done using statistical methods. At
-
Vishwanath, Sujaya Kumar; Woo, Hyunsuk; Jeon, Sanghun
2018-06-01
Atomic switches are considered to be building blocks for future non-volatile data storage and internet of things. However, obtaining device structures capable of ultrahigh density data storage, high endurance, and long data retention, and more importantly, understanding the switching mechanisms are still a challenge for atomic switches. Here, we achieved improved resistive switching performance in a bilayer structure containing aluminum oxide, with an oxygen-deficient oxide as the top switching layer and stoichiometric oxide as the bottom switching layer, using atomic layer deposition. This bilayer device showed a high on/off ratio (105) with better endurance (∼2000 cycles) and longer data retention (104 s) than single-oxide layers. In addition, depending on the compliance current, the bilayer device could be operated in four different resistance states. Furthermore, the depth profiles of the hourglass-shaped conductive filament of the bilayer device was observed by conductive atomic force microscopy.
-
An integrated circuit/packet switched video conferencing system
Energy Technology Data Exchange (ETDEWEB)
Kippenhan Junior, H.A.; Lidinsky, W.P.; Roediger, G.A. [Fermi National Accelerator Lab., Batavia, IL (United States). HEP Network Resource Center; Waits, T.A. [Rutgers Univ., Piscataway, NJ (United States). Dept. of Physics and Astronomy
1996-07-01
The HEP Network Resource Center (HEPNRC) at Fermilab and the Collider Detector Facility (CDF) collaboration have evolved a flexible, cost-effective, widely accessible video conferencing system for use by high energy physics collaborations and others wishing to use video conferencing. No current systems seemed to fully meet the needs of high energy physics collaborations. However, two classes of video conferencing technology: circuit-switched and packet-switched, if integrated, might encompass most of HEPS's needs. It was also realized that, even with this integration, some additional functions were needed and some of the existing functions were not always wanted. HEPNRC with the help of members of the CDF collaboration set out to develop such an integrated system using as many existing subsystems and components as possible. This system is called VUPAC (Video conferencing Using Packets and Circuits). This paper begins with brief descriptions of the circuit-switched and packet-switched video conferencing systems. Following this, issues and limitations of these systems are considered. Next the VUPAC system is described. Integration is accomplished primarily by a circuit/packet video conferencing interface. Augmentation is centered in another subsystem called MSB (Multiport MultiSession Bridge). Finally, there is a discussion of the future work needed in the evolution of this system. (author)
-
An integrated circuit/packet switched video conferencing system
International Nuclear Information System (INIS)
Kippenhan Junior, H.A.; Lidinsky, W.P.; Roediger, G.A.; Waits, T.A.
1996-01-01
The HEP Network Resource Center (HEPNRC) at Fermilab and the Collider Detector Facility (CDF) collaboration have evolved a flexible, cost-effective, widely accessible video conferencing system for use by high energy physics collaborations and others wishing to use video conferencing. No current systems seemed to fully meet the needs of high energy physics collaborations. However, two classes of video conferencing technology: circuit-switched and packet-switched, if integrated, might encompass most of HEPS's needs. It was also realized that, even with this integration, some additional functions were needed and some of the existing functions were not always wanted. HEPNRC with the help of members of the CDF collaboration set out to develop such an integrated system using as many existing subsystems and components as possible. This system is called VUPAC (Video conferencing Using Packets and Circuits). This paper begins with brief descriptions of the circuit-switched and packet-switched video conferencing systems. Following this, issues and limitations of these systems are considered. Next the VUPAC system is described. Integration is accomplished primarily by a circuit/packet video conferencing interface. Augmentation is centered in another subsystem called MSB (Multiport MultiSession Bridge). Finally, there is a discussion of the future work needed in the evolution of this system. (author)
-
Energy Technology Data Exchange (ETDEWEB)
Risko, W. P.
2002-07-01
Medium voltage static transfer switches (MVSTS) and medium voltage mechanical transfer switches (MVATS) perform a common function, namely selecting between two independent power sources to provide uninterrupted power to the loads. Although the functions are the same the method of performing that function is different and this method impacts the sources and connected load. This article describes the two methods of transfer -- mechanical and static -- their advantages and disadvantages, and their preferred applications. The MVSTS can be incorporated into many applications; it can work in conjunction with backup sources such as generators; and can replace generators as a low cost solution. The reliability of the MVSTS is very high; it also outperforms the MVATS with regard to transfer speed, and can react to anomalies in the same sub-cycle time frame. Because the design of the MVSTS is modular, it can be engineered and designed to fit into existing and future systems and applications, and can be used with different switchgear variations and protection arrangements. For example, load isolation and protection breakers can be added to the switchgear to provide flexibility and isolation.
-
DEFF Research Database (Denmark)
Phillips, Andrew; Cambiano, Valentina; Nakagawa, Fumiyo
2014-01-01
BACKGROUND: To guide future need for cheap resistance tests for use in low income settings, we assessed cost-effectiveness of drug resistance testing as part of monitoring of people on first line ART - with switching from first to second line ART being conditional on NNRTI drug resistance mutations...... being identified. METHODS: An individual level simulation model of HIV transmission, progression and the effect of ART which accounts for adherence and resistance development was used to compare outcomes of various potential monitoring strategies in a typical low income setting in sub-Saharan Africa....... Underlying monitoring strategies considered were based on clinical disease, CD4 count or viral load. Within each we considered a strategy in which no further measures are performed, one with a viral load measure to confirm failure, and one with both a viral load measure and a resistance test. Predicted...
-
Brand Switching – A Case of Mobile Telecom Industry in India
Directory of Open Access Journals (Sweden)
Srivastava SHAILA
2017-04-01
Full Text Available Telecom is one of the fastest-growing and highly competitive industries in India. Due to number of factors such as customers’ low switching cost, price sensitivity, and availability of Mobile Number Portability (MNP, choices available to customers and there is increase in the brand switching by them across mobile networks. This increased competition among players set pressure on them to find ways and means to retain their customers. Hence it is important to explore the factors that make the consumer switch towards other cellular network brands. This research aims to explore the factors which lead to brand switching behaviour of consumer in telecom sector. The data for this research was gathered through use of a structured questionnaire which was duly filled by the users of various service providers in Mumbai area. The chi-square test is used to test research hypothesis and which was further supported by factor analysis. The findings reveal that price, network quality, loyalty, value added services and satisfaction directly influence switching behaviour among customers. The practical implication of the outcomes of the present study would be useful for the telecom companies in their marketing strategies aiming to keep customers loyalty and to discourage brand switching.
-
Computational Prediction of Hot Spot Residues
Morrow, John Kenneth; Zhang, Shuxing
2013-01-01
Most biological processes involve multiple proteins interacting with each other. It has been recently discovered that certain residues in these protein-protein interactions, which are called hot spots, contribute more significantly to binding affinity than others. Hot spot residues have unique and diverse energetic properties that make them challenging yet important targets in the modulation of protein-protein complexes. Design of therapeutic agents that interact with hot spot residues has proven to be a valid methodology in disrupting unwanted protein-protein interactions. Using biological methods to determine which residues are hot spots can be costly and time consuming. Recent advances in computational approaches to predict hot spots have incorporated a myriad of features, and have shown increasing predictive successes. Here we review the state of knowledge around protein-protein interactions, hot spots, and give an overview of multiple in silico prediction techniques of hot spot residues. PMID:22316154
-
Direct-conversion switching-mode audio power amplifier with active capacitive voltage clamp
Energy Technology Data Exchange (ETDEWEB)
Ljusev, P.; Andersen, Michael A.E.
2005-07-01
This paper discusses the advantages and problems when implementing direct energy conversion switching-mode audio power amplifiers. It is shown that the total integration of the power supply and Class D audio power amplifier into one compact direct converter can simplify design, increase efficiency and integration level, reduce product volume and lower its cost. As an example, the principle of operation and the measurements made on a direct-conversion switching-mode audio power amplifier with active capacitive voltage clamp are presented. (au)
-
Direct-conversion switching-mode audio power amplifier with active capacitive voltage clamp
DEFF Research Database (Denmark)
Ljusev, Petar; Andersen, Michael Andreas E.
2005-01-01
This paper discusses the advantages and problems when implementing direct energy conversion switching-mode audio power amplifiers. It is shown that the total integration of the power supply and Class D audio power amplifier into one compact direct converter can simplify the design, increase...... efficiency, reduce the product volume and lower its cost. As an example, the principle of operation and the measurements made on a direct-conversion switching-mode audio power amplifier with active capacitive voltage clamp are presented....
-
Cohen, J; Millier, A; Karray, S; Toumi, M
2013-01-01
Switching drugs from prescription to non-prescription status (Rx-to-OTC) presents a unique set of challenges and opportunities to policy-makers and the industry in terms of managing health outcomes, pharmaceutical spending, and steering of consumer choices of therapy. Decision-analytic models are used to address uncertainty and produce reasonable estimates of the economic impact of switches for payers. This article presents a critical literature review of existing models which assess the economic impact of Rx-to-OTC switches, and provides guidelines in which future economic evaluations of Rx-to-OTC switches could be improved. A comprehensive search strategy was implemented in Medline and Embase, to retrieve published economic evaluations on Rx-to-OTC switches from 1995-2010. The research digest of the International Society of Pharmacoeconomics and Outcomes Research (ISPOR) was reviewed for potentially relevant abstracts for the past 3 years. Each model used was critically evaluated in terms of structure, relevance of inputs, methodology used, and robustness of results. Worldwide, the economic impact of Rx-to-OTC switches has only been evaluated in a total of 12 peer-reviewed publications. Ten out of 12 studies were US-based, and two European-based. The models covered various disease categories, including allergy, hypercholesterolemia, gastroenterology, contraception, pulmonology, and virology. Seventy-five per cent of the models predicted cost savings for payers and patients. Limitations of the models mainly included use of strong assumptions and non-inclusion of specific populations due to lack of data. Guidelines were developed to help future model development. They cover structural issues on decision context, health states, and clinical outcomes, and other considerations for model specifications. Although reviewed studies lacked quality, this review of economic evidence of Rx-to-OTC switches suggests that switches may produce cost savings to public and private
-
International Nuclear Information System (INIS)
Delarue, Erik; D'haeseleer, William
2008-01-01
Many countries committed themselves in the Kyoto protocol to reduce greenhouse gas (GHG) emissions. Some of these targeted emission reductions could result from a switch from coal-fired to gas-fired electricity generation. The focus in this work lies on Western Europe, with the presence of the European Union Emission Trading Scheme (EU ETS). For the switching to occur, several conditions have to be fulfilled. First, an economical incentive must be present, i.e. a sufficiently high European Union Allowance (EUA) price together with a sufficiently low natural gas price. Second, the physical potential for switching must exist, i.e. at a given load, there must remain enough power plants not running to make switching possible. This paper investigates what possibilities exist for switching coal-fired plants for gas-fired plants, dependent on the load level (the latter condition above). A fixed allowance cost and a variable natural gas price are assumed. The method to address GHG emission reduction potentials is first illustrated in a methodological case. Next, the GHG emission reduction potentials are addressed for several Western European countries together with a relative positioning of their electricity generation. GHG emission reduction potentials are also compared with simulation results. GHG emission reduction potentials tend to be significant. The Netherlands have a very widespread switching zone, so GHG emission reduction is practically independent of electricity generation. Other counties, like Germany, Spain and Italy could reduce GHG emissions significantly by switching. With an allowance cost following the switch level of a 50% efficient gas-fired plant and a 40% efficient coal-fired plant in the summer season (like in 2005), the global GHG emission reduction (in the electricity generating sector) for the eight modeled zones could amount to 19%
-
A New Low-Cost Hybrid Switched Reluctance Motor for Adjustable-Speed Pump Applications
DEFF Research Database (Denmark)
Lu, Kaiyuan; Rasmussen, Peter Omand; Watkins, Steve
2011-01-01
with conventional single-phase switched reluctance motors, it has an increased torque density. The cogging torque is beneficially used in this motor for reducing the torque ripple. It is demonstrated that such a motor drive system can be a suitable candidate to advantageously compete with the existing motor drive...
-
Tang, Fengna; Wang, Youqing
2017-11-01
Blood glucose (BG) regulation is a long-term task for people with diabetes. In recent years, more and more researchers have attempted to achieve automated regulation of BG using automatic control algorithms, called the artificial pancreas (AP) system. In clinical practice, it is equally important to guarantee the treatment effect and reduce the treatment costs. The main motivation of this study is to reduce the cure burden. The dynamic R-parameter economic model predictive control (R-EMPC) is chosen to regulate the delivery rates of exogenous hormones (insulin and glucagon). It uses particle swarm optimization (PSO) to optimize the economic cost function and the switching logic between insulin delivery and glucagon delivery is designed based on switching control theory. The proposed method is first tested on the standard subject; the result is compared with the switching PID and the switching MPC. The effect of the dynamic R-parameter on improving the control performance is illustrated by comparing the results of the EMPC and the R-EMPC. Finally, the robustness tests on meal change (size and timing), hormone sensitivity (insulin and glucagon), and subject variability are performed. All results show that the proposed method can improve the control performance and reduce the economic costs. The simulation results verify the effectiveness of the proposed algorithm on improving the tracking performance, enhancing robustness, and reducing economic costs. The method proposed in this study owns great worth in practical application.
-
The low enriched fuel cycle in the GA 1160 MW design and the switch-over to thorium
Energy Technology Data Exchange (ETDEWEB)
Larsen, H.
1974-03-15
Calculations for the GA 1160 MW HTR are presented. The aim of these investigations was to compare the Low Enriched Uranium (LEU) cycle and the Thorium cycle for the GA 1160 MW HTR both using the same GA designed integral block fuel element. The total fuel cycle cost for the equilibrium cycle comes out to be about 16% cheaper for the Thorium cycle than for the Low-Enriched cycle. However, these favorable results for the thorium cycle are completely dependent on the availability of reprocessing and refabrication facilities, for costs comparable with the costs used for these investigations. The possibility of starting the reactor on a LEU 3 year cycle and later switching over to a thorium 4 year cycle was investigated. No cost penalties were found to be paid during the switch-over. The problems of local power peaks and age factors were not investigated in greater detail as only integral physical quantities were obtained from the neutron physics calculations. However, no indications of any problem in the switch-over phase were given. Elaborate 3-dimensional methods are necessary for further investigation of these types of problems.
-
Analysis of the Expediency of Switching to Accounting Outsourcing
Directory of Open Access Journals (Sweden)
Liakhovych Halyna І.
2017-12-01
Full Text Available The aim of the article is to justify the methodology for analysis of the expediency of switching to accounting outsourcing. Based on considering scientific papers, approaches to analyzing the expediency of switching to accounting outsourcing are generalized; special attention is paid to analyzing transaction costs of accounting outsourcing, which under current conditions are one of the defining quantitative criteria for choosing this form of organization of accounting. The choice of the type of accounting outsourcing (full or partial for various groups of enterprises (micro-enterprises, small and medium-sized, large ones is justified. There determined the sequence of analyzing the expediency of switching to accounting outsourcing that implies identification of the areas of accounting for transferring; selection of an outsourcer; assessment of risks associated with reliability of the outsourcer. Prospects for further research are the issue of analyzing the effectiveness of outsourcing as a form of organization of accounting.
-
Switching Adaptability in Human-Inspired Sidesteps: A Minimal Model.
Fujii, Keisuke; Yoshihara, Yuki; Tanabe, Hiroko; Yamamoto, Yuji
2017-01-01
Humans can adapt to abruptly changing situations by coordinating redundant components, even in bipedality. Conventional adaptability has been reproduced by various computational approaches, such as optimal control, neural oscillator, and reinforcement learning; however, the adaptability in bipedal locomotion necessary for biological and social activities, such as unpredicted direction change in chase-and-escape, is unknown due to the dynamically unstable multi-link closed-loop system. Here we propose a switching adaptation model for performing bipedal locomotion by improving autonomous distributed control, where autonomous actuators interact without central control and switch the roles for propulsion, balancing, and leg swing. Our switching mobility model achieved direction change at any time using only three actuators, although it showed higher motor costs than comparable models without direction change. Our method of evaluating such adaptation at any time should be utilized as a prerequisite for understanding universal motor control. The proposed algorithm may simply explain and predict the adaptation mechanism in human bipedality to coordinate the actuator functions within and between limbs.
-
Demonstration of Ultra-Fast Switching in Nano metallic Resistive Switching Memory Devices
International Nuclear Information System (INIS)
Yang, Y.
2016-01-01
Interdependency of switching voltage and time creates a dilemma/obstacle for most resistive switching memories, which indicates low switching voltage and ultra-fast switching time cannot be simultaneously achieved. In this paper, an ultra-fast (sub-100 ns) yet low switching voltage resistive switching memory device (“nano metallic ReRAM”) was demonstrated. Experimental switching voltage is found independent of pulse width (intrinsic device property) when the pulse is long but shows abrupt time dependence (“cliff”) as pulse width approaches characteristic RC time of memory device (extrinsic device property). Both experiment and simulation show that the onset of cliff behavior is dependent on physical device size and parasitic resistance, which is expected to diminish as technology nodes shrink down. We believe this study provides solid evidence that nano metallic resistive switching memory can be reliably operated at low voltage and ultra-fast regime, thus beneficial to future memory technology.
-
Frenken, Marius; Berti, Stefan
2018-04-01
Working memory enables humans to maintain selected information for cognitive processes and ensures instant access to the memorized contents. Theories suggest that switching the focus of attention between items within working memory realizes the access. This is reflected in object-switching costs in response times when the item for the task processing is to be changed. Another correlate of attentional allocation in working memory is the P3a-component of the human event-related potential. The aim of this study was to demonstrate that switching of attention within working memory is a separable processing step. Participants completed a cued memory-updating task in which they were instructed to update one memory item at a time out of a memory list of four digits by applying a mathematical operation indicated by a target sign. The hypotheses predicted (1) prolonged updating times in switch (different item compared to previous trial) versus repetition trials (same item), (2) an influence of cues (valid/neutral) presented before the mathematical target on switching costs, and (3) that the P3a-component is more pronounced in the cue-target interval in the valid cue condition and more pronounced in the post-target interval in the neutral cue condition. A student's t-test verified the first hypothesis, repeated-measurement analyses of variance demonstrated that hypotheses 2 and 3 should be rejected. Results suggest that switching of attention within working memory could not be separated from further processing steps and retro-cue benefits are not due to a head start of retrieval as well as that switch costs represent internal processes. Copyright © 2018 Elsevier B.V. All rights reserved.
-
Residual stress measurement in a metal microdevice by micro Raman spectroscopy
International Nuclear Information System (INIS)
Song, Chang; Du, Liqun; Qi, Leijie; Li, Yu; Li, Xiaojun; Li, Yuanqi
2017-01-01
Large residual stress induced during the electroforming process cannot be ignored to fabricate reliable metal microdevices. Accurate measurement is the basis for studying the residual stress. Influenced by the topological feature size of micron scale in the metal microdevice, residual stress in it can hardly be measured by common methods. In this manuscript, a methodology is proposed to measure the residual stress in the metal microdevice using micro Raman spectroscopy (MRS). To estimate the residual stress in metal materials, micron sized β -SiC particles were mixed in the electroforming solution for codeposition. First, the calculated expression relating the Raman shifts to the induced biaxial stress for β -SiC was derived based on the theory of phonon deformation potentials and Hooke’s law. Corresponding micro electroforming experiments were performed and the residual stress in Ni–SiC composite layer was both measured by x-ray diffraction (XRD) and MRS methods. Then, the validity of the MRS measurements was verified by comparing with the residual stress measured by XRD method. The reliability of the MRS method was further validated by the statistical student’s t -test. The MRS measurements were found to have no systematic error in comparison with the XRD measurements, which confirm that the residual stresses measured by the MRS method are reliable. Besides that, the MRS method, by which the residual stress in a micro inertial switch was measured, has been confirmed to be a convincing experiment tool for estimating the residual stress in metal microdevice with micron order topological feature size. (paper)
-
Residual stress measurement in a metal microdevice by micro Raman spectroscopy
Song, Chang; Du, Liqun; Qi, Leijie; Li, Yu; Li, Xiaojun; Li, Yuanqi
2017-10-01
Large residual stress induced during the electroforming process cannot be ignored to fabricate reliable metal microdevices. Accurate measurement is the basis for studying the residual stress. Influenced by the topological feature size of micron scale in the metal microdevice, residual stress in it can hardly be measured by common methods. In this manuscript, a methodology is proposed to measure the residual stress in the metal microdevice using micro Raman spectroscopy (MRS). To estimate the residual stress in metal materials, micron sized β-SiC particles were mixed in the electroforming solution for codeposition. First, the calculated expression relating the Raman shifts to the induced biaxial stress for β-SiC was derived based on the theory of phonon deformation potentials and Hooke’s law. Corresponding micro electroforming experiments were performed and the residual stress in Ni-SiC composite layer was both measured by x-ray diffraction (XRD) and MRS methods. Then, the validity of the MRS measurements was verified by comparing with the residual stress measured by XRD method. The reliability of the MRS method was further validated by the statistical student’s t-test. The MRS measurements were found to have no systematic error in comparison with the XRD measurements, which confirm that the residual stresses measured by the MRS method are reliable. Besides that, the MRS method, by which the residual stress in a micro inertial switch was measured, has been confirmed to be a convincing experiment tool for estimating the residual stress in metal microdevice with micron order topological feature size.
-
Operation and Modulation of H7 Current Source Inverter with Hybrid SiC and Si Semiconductor Switches
DEFF Research Database (Denmark)
Wang, Weiqi; Gao, Feng; Yang, Yongheng
2018-01-01
This paper proposes an H7 current source inverter (CSI) consisting of a single parallel-connected silicon carbide (SiC) switch and a traditional silicon (Si) H6 CSI. The proposed H7 CSI takes the advantages of the SiC switch to maintain high efficiency, while significantly increasing the switching...... as an all-SiC-switch converter in terms of high performance and high efficiency with reduced DC inductance. It provides a cost-effective solution to addressing the efficiency issue of conventional CSI systems. Simulations and experiments are performed to validate the effectiveness of the proposed H7 CSI...
-
The impact of carbon prices on generation-cycling costs
International Nuclear Information System (INIS)
Denny, Eleanor; O'Malley, Mark
2009-01-01
The introduction of mechanisms aimed at reducing greenhouse gas emissions can have a serious impact on electricity system costs. A carbon mechanism that forces generators to internalise their emissions costs may alter the merit order in which generators are dispatched in the market. Heavy carbon dioxide polluters may switch from operating continuously to having to operate on the margin more often. This results in these units being required to switch on and off and vary their output more frequently, which has a significant impact on their costs. In this paper, the impact of carbon prices on the operating profiles of generators in a real electricity system is investigated. A large number of potential scenarios are considered and it is found that carbon prices significantly increase the cycling costs. These increased cycling costs significantly offset the carbon dioxide reduction benefits of the carbon price
-
DEFF Research Database (Denmark)
Carbonara, Emanuela; Guerra, Alice; Parisi, Francesco
2016-01-01
Economic models of tort law evaluate the efficiency of liability rules in terms of care and activity levels. A liability regime is optimal when it creates incentives to maximize the value of risky activities net of accident and precaution costs. The allocation of primary and residual liability...... for policy makers and courts in awarding damages in a large number of real-world accident cases....
-
Architectures of electro-optical packet switched networks
DEFF Research Database (Denmark)
Berger, Michael Stubert
2004-01-01
and examines possible architectures for future high capacity networks with high capacity nodes. It is assumed that optics will play a key role in this scenario, and in this respect, the European IST research project DAVID aimed at proposing viable architectures for optical packet switching, exploiting the best...... from optics and electronics. An overview of the DAVID network architecture is given, focusing on the MAN and WAN architecture as well as the MPLS based network hierarchy. A statistical model of the optical slot generation process is presented and utilised to evaluate delay vs. efficiency. Furthermore...... architecture for a buffered crossbar switch is presented. The architecture uses two levels of backpressure (flow control) with different constraints on round trip time. No additional scheduling complexity is introduced, and for the actual example shown, a reduction in memory of 75% was obtained at the cost...
-
Hybrid Switch Reluctance Drives For Pump Applications
DEFF Research Database (Denmark)
Jakobsen, Uffe
be the single phase hybrid switched reluctance motor (HSRM). Due to the simple construction of the single phase HSRM, manufacturing may be simplified compared to a three phase permanent magnet motor and consumption of copper may be lowered when compared to both the induction motor and some three phase permanent...... magnet synchronous motor (PMSM), the HSRM needs information about rotor position to be properly controlled. For BLDC, PMSM, induction motors, and the normal SRM position sensorless methods are relatively well established and have been used for some time. For the single phase switched reluctance motor......The initial research problem is to investigate an alternative motor drive to the existing permanent magnet synchronous and brushless DC-motor drives for pump applications. A review of different motor types showed that a possible candidate for another low cost permanent magnet motor may...
-
Very High Frequency Switch-Mode Power Supplies
DEFF Research Database (Denmark)
Madsen, Mickey Pierre
The importance of technology and electronics in our daily life is constantly increasing. At the same time portability and energy efficiency are currently some of the hottest topics. This creates a huge need for power converters in a compact form factor and with high efficiency, which can supply...... these electronic devices. This calls for new technologies in order to miniaturize the power electronics of today. One way to do this is by increasing the switching frequency dramatically and develop very high frequency switch mode power supplies. If these converters can be designed to operate efficiently, a huge...... size, weight and cost reduction can be achieved due to the smaller energy storing elements needed at these frequencies. The research presented in this thesis focuses on exactly this. First various technologies for miniaturization of power supplies are studied, e.g. piezo electric transformers, wide...
-
Bioethanol production from forestry residues: A comparative techno-economic analysis
International Nuclear Information System (INIS)
Frankó, Balázs; Galbe, Mats; Wallberg, Ola
2016-01-01
Highlights: • A proposed cellulosic ethanol biorefinery in Sweden was simulated with Aspen Plus. • Forestry residues with different bark contents were evaluated as raw materials. • The bark content negatively influenced the minimum ethanol selling price. • Sensitivity analyses were performed to assess the influence of raw material cost. - Abstract: A techno-economic analysis was conducted to assess the feasibility of using forestry residues with different bark contents for bioethanol production. A proposed cellulosic ethanol biorefinery in Sweden was simulated with Aspen Plus. The plant was assumed to convert different forestry assortments (sawdust and shavings, fuel logs, early thinnings, tops and branches, hog fuel and pulpwood) to ethanol, pellets, biogas and electricity. The intention was not to obtain absolute ethanol production costs for future facilities, but to assess and compare the future potential of utilizing different forestry residues for bioethanol production. The same plant design and operating conditions were assumed in all cases, and the effect of including bark on the whole conversion process, especially how it influenced the ethanol production cost, was studied. While the energy efficiency (not including district heating) obtained for the whole process was between 67 and 69% regardless of the raw material used, the ethanol production cost differed considerably; the minimum ethanol selling price ranging from 0.77 to 1.52 USD/L. Under the basic assumptions, all the forestry residues apart from sawdust and shavings exhibited a negative net present value at current market prices. The profitability decreased with increasing bark content of the raw material. Sensitivity analyses showed that, at current market prices, the utilization of bark-containing forestry residues will not provide significant cost improvement compared with pulpwood unless the conversion of cellulose and hemicellulose to monomeric sugars is improved.
-
The allosteric switching mechanism in bacteriophage MS2
Energy Technology Data Exchange (ETDEWEB)
Perkett, Matthew R.; Mirijanian, Dina T.; Hagan, Michael F., E-mail: hagan@brandeis.edu [Martin Fisher School of Physics, Brandeis University, Waltham, Massachusetts 02474 (United States)
2016-07-21
We use all-atom simulations to elucidate the mechanisms underlying conformational switching and allostery within the coat protein of the bacteriophage MS2. Assembly of most icosahedral virus capsids requires that the capsid protein adopts different conformations at precise locations within the capsid. It has been shown that a 19 nucleotide stem loop (TR) from the MS2 genome acts as an allosteric effector, guiding conformational switching of the coat protein during capsid assembly. Since the principal conformational changes occur far from the TR binding site, it is important to understand the molecular mechanism underlying this allosteric communication. To this end, we use all-atom simulations with explicit water combined with a path sampling technique to sample the MS2 coat protein conformational transition, in the presence and absence of TR-binding. The calculations find that TR binding strongly alters the transition free energy profile, leading to a switch in the favored conformation. We discuss changes in molecular interactions responsible for this shift. We then identify networks of amino acids with correlated motions to reveal the mechanism by which effects of TR binding span the protein. We find that TR binding strongly affects residues located at the 5-fold and quasi-sixfold interfaces in the assembled capsid, suggesting a mechanism by which the TR binding could direct formation of the native capsid geometry. The analysis predicts amino acids whose substitution by mutagenesis could alter populations of the conformational substates or their transition rates.
-
A Novel Application of Zero-Current-Switching Quasiresonant Buck Converter for Battery Chargers
Kuo-Kuang Chen
2011-01-01
The main purpose of this paper is to develop a novel application of a resonant switch converter for battery chargers. A zero-current-switching (ZCS) converter with a quasiresonant converter (QRC) was used as the main structure. The proposed ZCS dc–dc battery charger has a straightforward structure, low cost, easy control, and high efficiency. The operating principles and design procedure of the proposed charger are thoroughly analyzed. The optimal values of the resonant components are compute...
-
DESAIN DAN IMPLEMENTSI SOFT SWITCHING BOOST KONVERTER DENGAN SIMPLE AUXILLARY RESONANT SWITCH (SARC
Directory of Open Access Journals (Sweden)
Dimas Bagus Saputra
2017-01-01
Full Text Available Boost konverter merupakan penaik tegangan DC ke tegangan DC yang mempunyai tegangan output yang lebih tinggi dibanding inputnya. Penggunaan boost konverter diera modern semakin meningkat dan dibuat dengan dimensi yang lebih kecil, berat yang lebih ringan dan efisiensi yang lebih tinggi dibanding dengan boost konverter generasi terdahulu. Tetapi rugi-rugi periodik saat on/off meningkat. Untuk meraih kriteria tersebut, teknik hard switching boost konverter berevolusi menjadi teknik soft switching dengan menambah rangkaian simple auxiliary resonant circuit (SARC. Karena penambahan rangkaian SARC tersebut konverter bekerja pada kondisi zero-voltage switching switch (ZVS dan zero current switch (ZCS, sehingga saklar semikonduktor tidak bekerja secara hard switching lagi. Pada penelitian ini akan di desain dan diimplementaskan soft switching boost konverter dengan SARC. Kelebihan dari soft switching boost konverter dengan SARC adalah mempunyai efisiensi yang lebih tinggi dibanding dengan boost konverter konventional. Dari hasil implementasi menunjukkan konverter yang diajukan telah meraih zero voltage switch (ZVS. Sehingga boost konverter zero voltage switch (ZVS bisa diaplikasikan pada sistem power suplay yang membutuhkan efisiensi energi yang tinggi terutama pada daya yang tinggi.
-
Directory of Open Access Journals (Sweden)
Lea eHald
2013-02-01
Full Text Available Theories of embodied cognition (e.g., Perceptual Symbol Systems Theory; Barsalou, 1999, 2009 suggest that modality-specific simulations underlie the representation of concepts. Supporting evidence comes from modality switch costs: Participants are slower to verify a property in one modality (e.g., auditory, BLENDER-loud after verifying a property in a different modality (e.g., gustatory, CRANBERRIES-tart compared to the same modality (e.g., LEAVES-rustling, Pecher, Zeelenberg, & Barsalou, 2003. Similarly, modality switching costs lead to a modulation of the N400 effect in event related potentials (ERPs (Collins, Pecher, Zeelenberg, & Coulson, 2011; Hald, Marshall, Janssen, & Garnham, 2011. This effect of modality switching has also been shown to interact with the veracity of the sentence (Hald, et al., 2011. The current event-related potentials study (ERPs further explores the role of modality match/mismatch on the processing of veracity as well as negation (sentences containing not. Our results indicate a modulation in the ERP based on modality and veracity, plus an interaction. The evidence supports the idea that modality-specific simulations occur during language processing, and furthermore suggest that these simulations alter the processing of negation.
-
Inertia in strategy switching transforms the strategy evolution.
Zhang, Yanling; Fu, Feng; Wu, Te; Xie, Guangming; Wang, Long
2011-12-01
A recent experimental study [Traulsen et al., Proc. Natl. Acad. Sci. 107, 2962 (2010)] shows that human strategy updating involves both direct payoff comparison and the cost of switching strategy, which is equivalent to inertia. However, it remains largely unclear how such a predisposed inertia affects 2 × 2 games in a well-mixed population of finite size. To address this issue, the "inertia bonus" (strategy switching cost) is added to the learner payoff in the Fermi process. We find how inertia quantitatively shapes the stationary distribution and that stochastic stability under inertia exhibits three regimes, with each covering seven regions in the plane spanned by two inertia parameters. We also obtain the extended "1/3" rule with inertia and the speed criterion with inertia; these two findings hold for a population above two. We illustrate the above results in the framework of the Prisoner's Dilemma game. As inertia varies, two intriguing stationary distributions emerge: the probability of coexistence state is maximized, or those of two full states are simultaneously peaked. Our results may provide useful insights into how the inertia of changing status quo acts on the strategy evolution and, in particular, the evolution of cooperation.
-
"N"-2 Repetition Costs Depend on Preparation in Trials "n"-1 and "n"-2
Scheil, Juliane; Kleinsorge, Thomas
2014-01-01
In task switching, a common result supporting the notion of inhibitory processes as a determinant of switch costs is the occurrence of "n"-2 repetition costs. Evidence suggests that this effect is not affected by preparation. However, the role of preparation on preceding trials has been neglected so far. In this study, evidence for an…
-
Benzaouia, Abdellah
2012-01-01
Saturated Switching Systems treats the problem of actuator saturation, inherent in all dynamical systems by using two approaches: positive invariance in which the controller is designed to work within a region of non-saturating linear behaviour; and saturation technique which allows saturation but guarantees asymptotic stability. The results obtained are extended from the linear systems in which they were first developed to switching systems with uncertainties, 2D switching systems, switching systems with Markovian jumping and switching systems of the Takagi-Sugeno type. The text represents a thoroughly referenced distillation of results obtained in this field during the last decade. The selected tool for analysis and design of stabilizing controllers is based on multiple Lyapunov functions and linear matrix inequalities. All the results are illustrated with numerical examples and figures many of them being modelled using MATLAB®. Saturated Switching Systems will be of interest to academic researchers in con...
-
Energy Technology Data Exchange (ETDEWEB)
Yoshida, Kenji; Corper, Adam L.; Herro, Rana; Jabri, Bana; Wilson, Ian A.; Teyton, Luc (Scripps); (UC)
2011-11-16
Genetic susceptibility to autoimmunity is frequently associated with specific MHC alleles. Diabetogenic MHC class II molecules, such as human HLA-DQ8 and mouse I-A{sub g7}, typically have a small, uncharged amino acid residue at position 57 of their {beta} chain ({beta}57); this results in the absence of a salt bridge between {beta}57 and Arg{alpha}76, which is adjacent to the P9 pocket of the peptide-binding groove. However, the influence of Arg{alpha}76 on the selection of the TCR repertoire remains unknown, particularly when the MHC molecule binds a peptide with a neutral amino acid residue at position P9. Here, we have shown that diabetogenic MHC class II molecules bound to a peptide with a neutral P9 residue primarily selected and expanded cells expressing TCRs bearing a negatively charged residue in the first segment of their complementarity determining region 3{beta}. The crystal structure of one such TCR in complex with I-A{sub g7} bound to a peptide containing a neutral P9 residue revealed that a network of favorable long-range (greater than 4 {angstrom}) electrostatic interactions existed among Arg{alpha}76, the neutral P9 residue, and TCR, which supported the substantially increased TCR/peptide-MHC affinity. This network could be modulated or switched to a lower affinity interaction by the introduction of a negative charge at position P9 of the peptide. Our results support the existence of a switch at residue {beta}57 of the I-Ag7 and HLA-DQ8 class II molecules and potentially link normal thymic TCR selection with abnormal peripheral behavior.
-
A tubular flux-switching permanent magnet machine
Wang, J.; Wang, W.; Clark, R.; Atallah, K.; Howe, D.
2008-04-01
The paper describes a novel tubular, three-phase permanent magnet brushless machine, which combines salient features from both switched reluctance and permanent magnet machine technologies. It has no end windings and zero net radial force and offers a high power density and peak force capability, as well as the potential for low manufacturing cost. It is, therefore, eminently suitable for a variety of applications, ranging from free-piston energy converters to active vehicle suspensions.
-
Implementation of Single Phase Soft Switched PFC Converter for Plug-in-Hybrid Electric Vehicles
Directory of Open Access Journals (Sweden)
Aiswariya Sekar
2015-11-01
Full Text Available This paper presents a new soft switching boost converter with a passive snubber cell without additional active switches for battery charging systems. The proposed snubber finds its application in the front-end ac-dc converter of Plug-in Hybrid Electric Vehicle (PHEV battery chargers. The proposed auxiliary snubber circuit consists of an inductor, two capacitors and two diodes. The new converter has the advantages of continuous input current, low switching stresses, high voltage gain without extreme duty cycle, minimized charger size and charging time and fewer amounts of cost and electricity drawn from the utility at higher switching frequencies. The switch is made to turn ON by Zero Current Switching (ZCS and turn OFF by Zero Voltage Switching (ZVS. The detailed steady state analysis of the novel ac-dc Zero Current- Zero Voltage Switching (ZC-ZVS boost Power Factor Correction (PFC converter is presented with its operating principle. The experimental prototype of 20 kHz, 100 W converter verifies the theoretical analysis. The power factor of the prototype circuit reaches near unity with an efficiency of 97%, at nominal output power for a ±10% variation in the input voltage and ±20% variation in the snubber component values.
-
Hunter, Wynn G; Zhang, Cecilia Z; Hesson, Ashley; Davis, J Kelly; Kirby, Christine; Williamson, Lillie D; Barnett, Jamison A; Ubel, Peter A
2016-10-01
More than 1 in 4 Americans report difficulty paying medical bills. Cost-reducing strategies discussed during outpatient physician visits remain poorly characterized. We sought to determine how often patients and physicians discuss health care costs during outpatient visits and what strategies, if any, they discussed to lower patient out-of-pocket costs. Retrospective analysis of dialogue from 1,755 outpatient visits in community-based practices nationwide from 2010 to 2014. The study population included 677 patients with breast cancer, 422 with depression, and 656 with rheumatoid arthritis visiting 56 oncologists, 36 psychiatrists, and 26 rheumatologists, respectively. Thirty percent of visits contained cost conversations (95% confidence interval [CI], 28 to 32). Forty-four percent of cost conversations involved discussion of cost-saving strategies (95% CI, 40 to 48; median duration, 68 s). We identified 4 strategies to lower costs without changing the care plan. They were, in order of overall frequency: 1) changing logistics of care, 2) facilitating co-pay assistance, 3) providing free samples, and 4) changing/adding insurance plans. We also identified 4 strategies to reduce costs by changing the care plan: 1) switching to lower-cost alternative therapy/diagnostic, 2) switching from brand name to generic, 3) changing dosage/frequency, and 4) stopping/withholding interventions. Strategies were relatively consistent across health conditions, except for switching to a lower-cost alternative (more common in breast oncology) and providing free samples (more common in depression). Focus on 3 conditions with potentially high out-of-pocket costs. Despite price opacity, physicians and patients discuss a variety of out-of-pocket cost reduction strategies during clinic visits. Almost half of cost discussions mention 1 or more cost-saving strategies, with more frequent mention of those not requiring care-plan changes. © The Author(s) 2016.
-
Takesue, H.
2018-02-01
Punishment and partner switching are two well-studied mechanisms that support the evolution of cooperation. Observation of human behaviour suggests that the extent to which punishment is adopted depends on the usage of alternative mechanisms, including partner switching. In this study, we investigate the combined effect of punishment and partner switching in evolutionary prisoner's dilemma games conducted on a network. In the model, agents are located on the network and participate in the prisoner's dilemma games with punishment. In addition, they can opportunistically switch interaction partners to improve their payoff. Our Monte Carlo simulation showed that a large frequency of punishers is required to suppress defectors when the frequency of partner switching is low. In contrast, cooperation is the most abundant strategy when the frequency of partner switching is high regardless of the strength of punishment. Interestingly, cooperators become abundant not because they avoid the cost of inflicting punishment and earn a larger average payoff per game but rather because they have more numerous opportunities to be referred to as a role agent by defectors. Our results imply that the fluidity of social relationships has a profound effect on the adopted strategy in maintaining cooperation.
-
Development of the switch requirements and architecture of a safety data communication system
International Nuclear Information System (INIS)
Jeong, K.I.; Lee, J.K.; Park, H.Y.; Koo, I.S.
2004-12-01
In accordance with digitalising the Instrumentation and Control(I and C) systems in the integral reactor, a communication network is required for effective information exchanges between the different equipment, an enhancement of the design flexibility, a simple installation and cost reduction. Generally, a communication network consists of a topology, the protocol, a communication medium, an interconnection device, etc. In this report, the development methods of switch and the architecture of a Safety Data Communication System(SDCS) are investigated and analyzed. In this report, the design requirements for switch are presented, which are the essential requirements to develop the switch in a SDCS of the SMART-P. To establish these requirements, the evaluation and analysis of the design and implementation method of the COTS switches, the architecture of SDCS and the design requirements of a SDCS were performed. At the detail design stage, these requirements will be used for the top-tier requirements, especially the design target and design basis. To develop the detail design requirements in the future, more quantitative and qualitative analyses are required. In the case of selecting the COTS switch and developing the switch, these requirements will also be used for the evaluation guide
-
Development of the switch requirements and architecture of a safety data communication system
Energy Technology Data Exchange (ETDEWEB)
Jeong, K.I.; Lee, J.K.; Park, H.Y.; Koo, I.S
2004-12-01
In accordance with digitalising the Instrumentation and Control(I and C) systems in the integral reactor, a communication network is required for effective information exchanges between the different equipment, an enhancement of the design flexibility, a simple installation and cost reduction. Generally, a communication network consists of a topology, the protocol, a communication medium, an interconnection device, etc. In this report, the development methods of switch and the architecture of a Safety Data Communication System(SDCS) are investigated and analyzed. In this report, the design requirements for switch are presented, which are the essential requirements to develop the switch in a SDCS of the SMART-P. To establish these requirements, the evaluation and analysis of the design and implementation method of the COTS switches, the architecture of SDCS and the design requirements of a SDCS were performed. At the detail design stage, these requirements will be used for the top-tier requirements, especially the design target and design basis. To develop the detail design requirements in the future, more quantitative and qualitative analyses are required. In the case of selecting the COTS switch and developing the switch, these requirements will also be used for the evaluation guide.
-
Cooper, James A.
1986-01-01
A logic circuit is used to enhance redundant switch reliability. Two or more switches are monitored for logical high or low output. The output for the logic circuit produces a redundant and failsafe representation of the switch outputs. When both switch outputs are high, the output is high. Similarly, when both switch outputs are low, the logic circuit's output is low. When the output states of the two switches do not agree, the circuit resolves the conflict by memorizing the last output state which both switches were simultaneously in and produces the logical complement of this output state. Thus, the logic circuit of the present invention allows the redundant switches to be treated as if they were in parallel when the switches are open and as if they were in series when the switches are closed. A failsafe system having maximum reliability is thereby produced.
-
Some Design Considerations on the Electrostatically Actuated Fixed-Fixed End Type MEMS Switches
International Nuclear Information System (INIS)
Sadeghian, Hamed; Rezazadeh, Ghader; Sani, Ebrahim Abbaspour
2006-01-01
The nonlinear electrostatic pull-in behaviour of MEMS Switches in micro-electromechanical systems (MEMS) is investigated in this article. We used the distributed model when the electrostatic pressure didn't apply at the whole of the beam and applied only in the mid-part of the beam. In this part the electrostatic area is different from two other parts. The model uses Euler-Bernoulli beam theory for fixed-fixed end type beams. The finite difference method was used to solve the nonlinear equation. The proposed model includes the fringing effects of the electrical field, residual stress and varying electrostatic area effects. The numerical results reveal that the profile deflection of the MEMS Switch may not only influence the distribution of the electrostatic force but also considerably change the nonlinear pull-in voltage
-
Management of stormwater facility maintenance residuals
1998-06-01
Current research on stormwater maintenance residuals has revealed that the source and nature of these materials is extremely variable, that regulation can be ambiguous, and handling can be costly and difficult. From a regulatory perspective, data ind...
-
Energy Technology Data Exchange (ETDEWEB)
Zhang, Juan, E-mail: juanzhang@staff.shu.edu.cn, E-mail: ywang@siom.ac.cn; Zhang, Rongjun [Key Laboratory of Specialty Fiber Optics and Optical Access Networks, School of Communication and Information Engineering, Shanghai University, Shanghai 200072 (China); Wang, Yang, E-mail: juanzhang@staff.shu.edu.cn, E-mail: ywang@siom.ac.cn [Key Laboratory of High Power Laser Materials, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800 (China)
2015-06-07
A new approach to achieve VO{sub 2}-like thermo-optical switching in a one-dimensional photonic crystal by the combination of thermo-optical and optical Kerr effects was proposed and numerically demonstrated in this study. The switching temperature and the hysteresis width can be tuned in a wide temperature range. Steep transition, high optical contrast, and low pumping power can be achieved at the same time. This kind of one-dimensional photonic crystal-based bistable switch will be low-cost, easy-to-fabricate, and versatile in practical applications compared with traditional VO{sub 2}-type one.
-
DEFF Research Database (Denmark)
Larsen, Dennis Øland; Vinter, Martin; Jørgensen, Ivan Harald Holger
A switched capacitor dc-dc converter with frequency-planned control is presented. By splitting the output stage switches in eight segments the output voltage can be regulated with a combination of switching frequency and switch conductance. This allows for switching at predetermined frequencies, 31...
-
A Component-Reduced Zero-Voltage Switching Three-Level DC-DC Converter
DEFF Research Database (Denmark)
Qin, Zian; Pang, Ying; Wang, Huai
2016-01-01
The basic Zero-Voltage Switching (ZVS) three-level DC-DC converter has one clamping capacitor to realize the ZVS of the switches, and two clamping diodes to clamp the voltage of the clamping capacitor. In order to reduce the reverse recovery loss of the diode as well as its cost, this paper...... proposes to remove one of the clamping diodes in basic ZVS three-level DC-DC converter. With less components, the proposed converter can still have a stable clamping capacitor voltage, which is clamped at half of the dc link voltage. Moreover, the ZVS performance will be influenced by removing the clamping...
-
Switching statins in Norway after new reimbursement policy – a nationwide prescription study
Sakshaug, Solveig; Furu, Kari; Karlstad, Øystein; Rønning, Marit; Skurtveit, Svetlana
2007-01-01
What is already known about this subject Use of statins is growing worldwide and costs represent a burden to public budgets. The introduction of simvastatin generics, generic substitution and price regulations have contributed to price reductions and resulted in overall cost reductions of statin use in Norway. What this study adds New reimbursement regulations for statins in Norway in June 2005, making simvastatin the drug of choice, had a great impact on physicians' prescribing of statins. Nearly 40% of the atorvastatin users switched to simvastatin during the 13-month period after implementation of the new regulations. Among the new users of statins the proportion receiving simvastatin increased from 48% in May 2005 to 92% in June 2006. The new regulations have reduced costs of statins, even though the prevalence of statin use has increased. Aims To assess the changes in prescribing of statins in Norway after implementation of the new reimbursement regulations for statins in June 2005. Methods Data were retrieved from the Norwegian Prescription Database covering the total population in Norway (4.6 million). Outcome measures were the proportion of atorvastatin users switching to simvastatin and changes in the proportion of new statin users receiving simvastatin. Based on retail costs for all statin prescriptions dispensed in Norway, expenditure was measured in Norwegian currency. Results One-year prevalences of statin use increased from 6.3 to 6.8% for women and from 7.5 to 8.1% for men from the year before to the year after the new statin regulations. Of atorvastatin users (N = 131 222), 39% switched to simvastatin during the 13-month period after the implementation. The proportion of switching was higher in women (41%) than in men (36%). In May 2005, 48% of the new statin users received simvastatin. The proportion of new users receiving simvastatin increased rapidly after implementation of the new regulations to 68% in June 2005 and reached 92% in June 2006
-
Effective switching frequency multiplier inverter
Su, Gui-Jia [Oak Ridge, TN; Peng, Fang Z [Okemos, MI
2007-08-07
A switching frequency multiplier inverter for low inductance machines that uses parallel connection of switches and each switch is independently controlled according to a pulse width modulation scheme. The effective switching frequency is multiplied by the number of switches connected in parallel while each individual switch operates within its limit of switching frequency. This technique can also be used for other power converters such as DC/DC, AC/DC converters.
-
Operation of a homeostatic sleep switch.
Pimentel, Diogo; Donlea, Jeffrey M; Talbot, Clifford B; Song, Seoho M; Thurston, Alexander J F; Miesenböck, Gero
2016-08-18
Sleep disconnects animals from the external world, at considerable risks and costs that must be offset by a vital benefit. Insight into this mysterious benefit will come from understanding sleep homeostasis: to monitor sleep need, an internal bookkeeper must track physiological changes that are linked to the core function of sleep. In Drosophila, a crucial component of the machinery for sleep homeostasis is a cluster of neurons innervating the dorsal fan-shaped body (dFB) of the central complex. Artificial activation of these cells induces sleep, whereas reductions in excitability cause insomnia. dFB neurons in sleep-deprived flies tend to be electrically active, with high input resistances and long membrane time constants, while neurons in rested flies tend to be electrically silent. Correlative evidence thus supports the simple view that homeostatic sleep control works by switching sleep-promoting neurons between active and quiescent states. Here we demonstrate state switching by dFB neurons, identify dopamine as a neuromodulator that operates the switch, and delineate the switching mechanism. Arousing dopamine caused transient hyperpolarization of dFB neurons within tens of milliseconds and lasting excitability suppression within minutes. Both effects were transduced by Dop1R2 receptors and mediated by potassium conductances. The switch to electrical silence involved the downregulation of voltage-gated A-type currents carried by Shaker and Shab, and the upregulation of voltage-independent leak currents through a two-pore-domain potassium channel that we term Sandman. Sandman is encoded by the CG8713 gene and translocates to the plasma membrane in response to dopamine. dFB-restricted interference with the expression of Shaker or Sandman decreased or increased sleep, respectively, by slowing the repetitive discharge of dFB neurons in the ON state or blocking their entry into the OFF state. Biophysical changes in a small population of neurons are thus linked to the
-
Instability in time-delayed switched systems induced by fast and random switching
Guo, Yao; Lin, Wei; Chen, Yuming; Wu, Jianhong
2017-07-01
In this paper, we consider a switched system comprising finitely or infinitely many subsystems described by linear time-delayed differential equations and a rule that orchestrates the system switching randomly among these subsystems, where the switching times are also randomly chosen. We first construct a counterintuitive example where even though all the time-delayed subsystems are exponentially stable, the behaviors of the randomly switched system change from stable dynamics to unstable dynamics with a decrease of the dwell time. Then by using the theories of stochastic processes and delay differential equations, we present a general result on when this fast and random switching induced instability should occur and we extend this to the case of nonlinear time-delayed switched systems as well.
-
A Novel Application of Zero-Current-Switching Quasiresonant Buck Converter for Battery Chargers
Directory of Open Access Journals (Sweden)
Kuo-Kuang Chen
2011-01-01
Full Text Available The main purpose of this paper is to develop a novel application of a resonant switch converter for battery chargers. A zero-current-switching (ZCS converter with a quasiresonant converter (QRC was used as the main structure. The proposed ZCS dc–dc battery charger has a straightforward structure, low cost, easy control, and high efficiency. The operating principles and design procedure of the proposed charger are thoroughly analyzed. The optimal values of the resonant components are computed by applying the characteristic curve and electric functions derived from the circuit configuration. Experiments were conducted using lead-acid batteries. The optimal parameters of the resonance components were determined using the load characteristic curve diagrams. These values enable the battery charger to turn on and off at zero current, resulting in a reduction of switching losses. The results of the experiments show that when compared with the traditional pulse-width-modulation (PWM converter for a battery charger, the buck converter with a zero- current-switching quasiresonant converter can lower the temperature of the activepower switch.
-
Gade, Miriam; Souza, Alessandra S; Druey, Michel D; Oberauer, Klaus
2017-01-01
Working memory (WM) holds and manipulates representations for ongoing cognition. Oberauer (Psychology of Learning and Motivation, 51, 45-100, 2009) distinguishes between two analogous WM sub-systems: a declarative WM which handles the objects of thought, and a procedural WM which handles the representations of (cognitive) actions. Here, we assessed whether analogous effects are observed when participants switch between memory sets (declarative representations) and when they switch between task sets (procedural representations). One mechanism assumed to facilitate switching in procedural WM is the inhibition of previously used, but currently irrelevant task sets, as indexed by n-2 task-repetition costs (Mayr & Keele, Journal of Experimental Psychology: General, 129(1), 4-26, 2000). In this study we tested for an analogous effect in declarative WM. We assessed the evidence for n-2 list-repetition costs across eight experiments in which participants switched between memory lists to perform speeded classifications, mental arithmetic, or a local recognition test. N-2 list-repetition costs were obtained consistently in conditions assumed to increase interference between memory lists, and when lists formed chunks in long-term memory. Further analyses across experiments revealed a substantial contribution of episodic memory to n-2 list-repetition costs, thereby questioning the interpretation of n-2 repetition costs as reflecting inhibition. We reanalyzed the data of eight task-switching experiments, and observed that episodic memory also contributes to n-2 task-repetition costs. Taken together, these results show analogous processing principles in declarative and procedural WM, and question the relevance of inhibitory processes for efficient switching between mental sets.
-
A Lossless Switch for Data Acquisition Networks
Jereczek, Grzegorz Edmund; The ATLAS collaboration
2015-01-01
The recent trends in software-defined networking (SDN) and network function virtualization (NFV) are boosting the advance of software-based packet processing and forwarding on commodity servers. Although performance has traditionally been the challenge of this approach, this situation changes with modern server platforms. High performance load balancers, proxies, virtual switches and other network functions can be now implemented in software and not limited to specialized commercial hardware, thus reducing cost and increasing the flexibility. In this paper we design a lossless software-based switch for high bandwidth data acquisition (DAQ) networks, using the ATLAS experiment at CERN as a case study. We prove that it can effectively solve the incast pathology arising from the many-to-one communication pattern present in DAQ networks by providing extremely high buffering capabilities. We evaluate this on a commodity server equipped with twelve 10 Gbps Ethernet interfaces providing a total bandwidth of 120 Gbps...
-
Garcia, Ernest J; Polosky, Marc A
2013-05-21
An optical switch reliably maintains its on or off state even when subjected to environments where the switch is bumped or otherwise moved. In addition, the optical switch maintains its on or off state indefinitely without requiring external power. External power is used only to transition the switch from one state to the other. The optical switch is configured with a fixed optical fiber and a movable optical fiber. The movable optical fiber is guided by various actuators in conjunction with a latching mechanism that configure the switch in one position that corresponds to the on state and in another position that corresponds to the off state.
-
Directory of Open Access Journals (Sweden)
Hee Han
2018-03-01
Full Text Available An important task in forest residue recovery operations is to select the most cost-efficient feedstock logistics system for a given distribution of residue piles, road access, and available machinery. Notable considerations include inaccessibility of treatment units to large chip vans and frequent, long-distance mobilization of forestry equipment required to process dispersed residues. In this study, we present optimized biomass feedstock logistics on a tree-shaped road network that take into account the following options: (1 grinding residues at the site of treatment and forwarding ground residues either directly to bioenergy facility or to a concentration yard where they are transshipped to large chip vans, (2 forwarding residues to a concentration yard where they are stored and ground directly into chip vans, and (3 forwarding residues to a nearby grinder location and forwarding the ground materials. A mixed-integer programming model coupled with a network algorithm was developed to solve the problem. The model was applied to recovery operations on a study site in Colorado, USA, and the optimal solution reduced the cost of logistics up to 11% compared to the conventional system. This is an important result because this cost reduction propagates downstream through the biomass supply chain, reducing production costs for bioenergy and bioproducts.
-
Computational prediction of protein hot spot residues.
Morrow, John Kenneth; Zhang, Shuxing
2012-01-01
Most biological processes involve multiple proteins interacting with each other. It has been recently discovered that certain residues in these protein-protein interactions, which are called hot spots, contribute more significantly to binding affinity than others. Hot spot residues have unique and diverse energetic properties that make them challenging yet important targets in the modulation of protein-protein complexes. Design of therapeutic agents that interact with hot spot residues has proven to be a valid methodology in disrupting unwanted protein-protein interactions. Using biological methods to determine which residues are hot spots can be costly and time consuming. Recent advances in computational approaches to predict hot spots have incorporated a myriad of features, and have shown increasing predictive successes. Here we review the state of knowledge around protein-protein interactions, hot spots, and give an overview of multiple in silico prediction techniques of hot spot residues.
-
Avalanche photoconductive switching
Pocha, M. D.; Druce, R. L.; Wilson, M. J.; Hofer, W. W.
This paper describes work being done at Lawrence Livermore National Laboratory on the avalanche mode of operation of laser triggered photoconductive switches. We have been able to generate pulses with amplitudes of 2 kV to 35 kV and rise times of 300 to 500 ps, and with a switching gain (energy of output electrical pulse vs energy of trigger optical pulse) of 10(exp 3) to over 10(exp 5). Switches with two very different physical configurations and with two different illumination wavelengths (1.06 micrometer, 890 nm) exhibit very similar behavior. The avalanche switching behavior, therefore, appears to be related to the material parameters rather than the optical wavelength or switch geometry. Considerable further work needs to be done to fully characterize and understand this mode of operation.
-
Avalanche photoconductive switching
Energy Technology Data Exchange (ETDEWEB)
Pocha, M.D.; Druce, R.L.; Wilson, M.J.; Hofer, W.W.
1989-01-01
This paper describes work being done at Lawrence Livermore National Laboratory on the avalanche mode of operation of laser triggered photoconductive switches. We have been able to generate pulses with amplitudes of 2 kV--35 kV and rise times of 300--500 ps, and with a switching gain (energy of output electrical pulse vs energy of trigger optical pulse) of 10{sup 3} to over 10{sup 5}. Switches with two very different physical configurations and with two different illumination wavelengths (1.06 {mu}m, 890 nm) exhibit very similar behavior. The avalanche switching behavior, therefore, appears to be related to the material parameters rather than the optical wavelength or switch geometry. Considerable further work needs to be done to fully characterize and understand this mode of operation. 3 refs., 6 figs.
-
Chemical activation of gasification carbon residue for phosphate removal
Kilpimaa, Sari; Runtti, Hanna; Lassi, Ulla; Kuokkanen, Toivo
2012-05-01
Recycling of waste materials provides an economical and environmentally significant method to reduce the amount of waste. Bioash formed in the gasification process possesses a notable amount of unburned carbon and therefore it can be called a carbon residue. After chemical activation carbon residue could be use to replace activated carbon for example in wastewater purification processes. The effect of chemical activation process variables such as chemical agents and contact time in the chemical activation process were investigated. This study also explored the effectiveness of the chemically activated carbon residue for the removal of phosphate from an aqueous solution. The experimental adsorption study was performed in a batch reactor and the influence of adsorption time, initial phosphate concentration and pH was studied. Due to the carbon residue's low cost and high adsorption capacity, this type of waste has the potential to be utilised for the cost-effective removal of phosphate from wastewaters. Potential adsorbents could be prepared from these carbonaceous by-products and used as an adsorbent for phosphate removal.
-
160-Gb/s Silicon All-Optical Packet Switch for Buffer-less Optical Burst Switching
DEFF Research Database (Denmark)
Hu, Hao; Ji, Hua; Pu, Minhao
2015-01-01
We experimentally demonstrate a 160-Gb/s Ethernet packet switch using an 8.6-mm-long silicon nanowire for optical burst switching, based on cross phase modulation in silicon. One of the four packets at the bit rate of 160 Gb/s is switched by an optical control signal using a silicon based 1 × 1 all......-optical packet switch. Error free performance (BER silicon packet switch based optical burst switching, which might be desirable for high-speed interconnects within a short...
-
Cost benefit analysis cost effectiveness analysis
International Nuclear Information System (INIS)
Lombard, J.
1986-09-01
The comparison of various protection options in order to determine which is the best compromise between cost of protection and residual risk is the purpose of the ALARA procedure. The use of decision-aiding techniques is valuable as an aid to selection procedures. The purpose of this study is to introduce two rather simple and well known decision aiding techniques: the cost-effectiveness analysis and the cost-benefit analysis. These two techniques are relevant for the great part of ALARA decisions which need the use of a quantitative technique. The study is based on an hypothetical case of 10 protection options. Four methods are applied to the data
-
Nano-electromechanical switch-CMOS hybrid technology and its applications.
Lee, B H; Hwang, H J; Cho, C H; Lim, S K; Lee, S Y; Hwang, H
2011-01-01
Si-based CMOS technology is facing a serious challenge in terms of power consumption and variability. The increasing costs associated with physical scaling have motivated a search for alternative approaches. Hybridization of nano-electromechanical (NEM)-switch and Si-based CMOS devices has shown a theoretical feasibility for power management, but a huge technical gap must be bridged before a nanoscale NEM switch can be realized due to insufficient material development and the limited understanding of its reliability characteristics. These authors propose the use of a multilayer graphene as a nanoscale cantilever material for a nanoscale NEM switchwith dimensions comparable to those of the state-of-the-art Si-based CMOS devices. The optimal thickness for the multilayer graphene (about five layers) is suggested based on an analytical model. Multilayer graphene can provide the highest Young's modulus among the known electrode materials and a yielding strength that allows more than 15% bending. Further research on material screening and device integration is needed, however, to realize the promises of the hybridization of NEM-switch and Si-based CMOS devices.
-
Vartak, Rajdeep; Rag, Adarsh; De, Shounak; Bhat, Somashekhara
2018-05-01
We report here the use of facile and environmentally benign way synthesized reduced graphene oxide (RGO) for low-voltage non-volatile memory device as charge storing element. The RGO solutions have been synthesized using electrochemical exfoliation of battery electrode. The solution processed based RGO solution is suitable for large area and low-cost processing on plastic substrate. Room-temperature current-voltage characterisation has been carried out in Ag/RGO/ITO PET sandwich configuration to study the type of trap distribution. It is observed that in the low-voltage sweep, ohmic current is the main mechanism of current flow and trap filled/assisted conduction is observed at high-sweep voltage region. The Ag/RGO/ITO PET sandwich structure showed bipolar resistive switching behavior. These mechanisms can be analyzed based on oxygen availability and vacancies in the RGO giving rise to continuous least resistive path (conductive) and high resistance path along the structure. An Ag/RGO/ITO arrangement demonstrates long retention time with low operating voltage, low set/reset voltage, good ON/OFF ratio of 103 (switching transition between lower resistance state and higher resistance state and decent switching performance. The RGO memory showed decent results with an almost negligible degradation in switching properties which can be used for low-voltage and low-cost advanced flexible electronics.
-
DEFF Research Database (Denmark)
Peng, Tao; Dan, Hanbing; Yang, Jian
2016-01-01
To improve the reliability of the matrix converter (MC), a fault diagnosis method to identify single open-switch fault is proposed in this paper. The introduced fault diagnosis method is based on finite control set-model predictive control (FCS-MPC), which employs a time-discrete model of the MC...... topology and a cost function to select the best switching state for the next sampling period. The proposed fault diagnosis method is realized by monitoring the load currents and judging the switching state to locate the faulty switch. Compared to the conventional modulation strategies such as carrier......-based modulation method, indirect space vector modulation and optimum Alesina-Venturini, the FCS-MPC has known and unchanged switching state in a sampling period. It is simpler to diagnose the exact location of the open switch in MC with FCS-MPC. To achieve better quality of the output current under single open...
-
Controllability of multi-agent systems with periodically switching topologies and switching leaders
Tian, Lingling; Zhao, Bin; Wang, Long
2018-05-01
This paper considers controllability of multi-agent systems with periodically switching topologies and switching leaders. The concept of m-periodic controllability is proposed, and a criterion for m-periodic controllability is established. The effect of the duration of subsystems on controllability is analysed by utilising a property of analytic functions. In addition, the influence of switching periods on controllability is investigated, and an algorithm is proposed to search for the fewest periods to ensure controllability. A necessary condition for m-periodic controllability is obtained from the perspective of eigenvectors of the subsystems' Laplacian matrices. For a system with switching leaders, it is proved that switching-leader controllability is equivalent to multiple-leader controllability. Furthermore, both the switching order and the tenure of agents being leaders have no effect on the controllability. Some examples are provided to illustrate the theoretical results.
-
Hysteresis controller with constant switching frequency
DEFF Research Database (Denmark)
Poulsen, Søren; Andersen, Michael Andreas E.
2005-01-01
Switch mode audio power amplifiers are showing up on market in still greater numbers because of advantages in form of high efficiency and low total system cost, especially for high power amplifiers. Several different modulator topologies have been made, ranging from standard PWM to various self......-oscillating and digital modulators. Performance in terms of low distortion, noise and dynamic range differs significantly with the modulator topology used. Highest system performance is generally achieved with analog modulators made as a modulator loop including at least the power stage of the amplifier, because...
-
for indoor residuAl sprAying in rAkAi district, ugAndA
African Journals Online (AJOL)
2011-11-11
Nov 11, 2011 ... for irs and factors associated with willingness to accept use of ddt. Results: ... system alone (1) accounting for 30 to 50 percent of outpatient ... 9 to 14 percent of inpatient deaths; making Uganda ... a long residual effect and has lower operational cost .... reasons for their decision: fear of health effects from.
-
Demonstration of fuel switching on oceangoing vessels in the Gulf of Mexico.
Browning, Louis; Hartley, Seth; Bandemehr, Angela; Gathright, Kenneth; Miller, Wayne
2012-09-01
Switching fuels from high-sulfur heavy fuel oils (HFO) to lower sulfur marine gas oils (MGO) on an oceangoing vessel (OGV) can substantially reduce both PM and SO(x) ship stack emissions, potentially resulting in significant human health and environmental benefits in Gulf of Mexico port communities. The International Maritime Organization (IMO) established an emission control area (ECA) within 200 nautical miles of the US. and Canadian coastlines and French territories off the coast of Canada with lower fuel sulfur standards effective beginning August 2012, where OGVs will need to switch from HFO to MGO. However some operators and other stakeholders, particularly in the Gulf of Mexico, may be unfamiliar with the benefits and requirements and ship operators may be concerned over potential implications for cost and operations. This first-ever US. Environmental Protection Agency (EPA)-sponsored fuel switching demonstration in the Gulf of Mexico was initiated to showcase the environmental and health benefits of as well as operational issues associated with, fuel switching through the following activities: (1) Fuel switching was conducted on typical container ships operating the Gulf of Mexico, as routine fuel switching has been demonstrated in California in recent years. Two vessels were employed in the demonstration: the Maersk Roubaix, which switched fuels entering Port of Houston, TX, and the Port of Progreso, Mexico, and the Hamburg Süd vessel Cap San Lorenzo, which switched fuels entering the Port of Houston and the Mexican Ports of Veracruz and Altamira. Operational and cost aspects were also noted. (2) Emissions reductions were quantified through both a calculation approach based on fuel use of the Maersk Line vessel Roubaix and in-stack monitoring of emissions from the Hamburg Süd Cap San Lorenzo. Pollutant emissions including PM, SO(x), NO(x), and PM component speciation were sampled during use of both fuels. These observations showed reductions (1-6%) in NO
-
Respiratory infections and pneumonia: potential benefits of switching from smoking to vaping.
Campagna, Davide; Amaradio, Maria Domenica; Sands, Mark F; Polosa, Riccardo
2016-01-01
Abstaining from tobacco smoking is likely to lower the risk of respiratory infections and pneumonia. Unfortunately, quitting smoking is not easy. Electronic cigarettes (ECs) are emerging as an attractive long-term alternative nicotine source to conventional cigarettes and are being adopted by smokers who wish to reduce or quit cigarette consumption. Also, given that the propylene glycol in EC aerosols is a potent bactericidal agent, switching from smoking to regular vaping is likely to produce additional lung health benefits. Here, we critically address some of the concerns arising from regular EC use in relation to lung health, including respiratory infections and pneumonia. In conclusion, smokers who quit by switching to regular ECs use can reduce risk and reverse harm from tobacco smoking. Innovation in the e-vapour category is likely not only to further minimise residual health risks, but also to maximise health benefits.
-
Uncertainty quantification in capacitive RF MEMS switches
Pax, Benjamin J.
Development of radio frequency micro electrical-mechanical systems (RF MEMS) has led to novel approaches to implement electrical circuitry. The introduction of capacitive MEMS switches, in particular, has shown promise in low-loss, low-power devices. However, the promise of MEMS switches has not yet been completely realized. RF-MEMS switches are known to fail after only a few months of operation, and nominally similar designs show wide variability in lifetime. Modeling switch operation using nominal or as-designed parameters cannot predict the statistical spread in the number of cycles to failure, and probabilistic methods are necessary. A Bayesian framework for calibration, validation and prediction offers an integrated approach to quantifying the uncertainty in predictions of MEMS switch performance. The objective of this thesis is to use the Bayesian framework to predict the creep-related deflection of the PRISM RF-MEMS switch over several thousand hours of operation. The PRISM switch used in this thesis is the focus of research at Purdue's PRISM center, and is a capacitive contacting RF-MEMS switch. It employs a fixed-fixed nickel membrane which is electrostatically actuated by applying voltage between the membrane and a pull-down electrode. Creep plays a central role in the reliability of this switch. The focus of this thesis is on the creep model, which is calibrated against experimental data measured for a frog-leg varactor fabricated and characterized at Purdue University. Creep plasticity is modeled using plate element theory with electrostatic forces being generated using either parallel plate approximations where appropriate, or solving for the full 3D potential field. For the latter, structure-electrostatics interaction is determined through immersed boundary method. A probabilistic framework using generalized polynomial chaos (gPC) is used to create surrogate models to mitigate the costly full physics simulations, and Bayesian calibration and forward
-
Harvesting and handling agricultural residues for energy
Energy Technology Data Exchange (ETDEWEB)
Jenkins, B.M.; Summer, H.R.
1986-05-01
Significant progress in understanding the needs for design of agricultural residue collection and handling systems has been made but additional research is required. Recommendations are made for research to (a) integrate residue collection and handling systems into general agricultural practices through the development of multi-use equipment and total harvest systems; (b) improve methods for routine evaluation of agricultural residue resources, possibly through remote sensing and image processing; (c) analyze biomass properties to obtain detailed data relevant to engineering design and analysis; (d) evaluate long-term environmental, social, and agronomic impacts of residue collection; (e) develop improved equipment with higher capacities to reduce residue collection and handling costs, with emphasis on optimal design of complete systems including collection, transportation, processing, storage, and utilization; and (f) produce standard forms of biomass fuels or products to enhance material handling and expand biomass markets through improved reliability and automatic control of biomass conversion and other utilization systems. 118 references.
-
A Cost-Benefit Analysis of Earned Value Management System Criteria
National Research Council Canada - National Science Library
Cole, John
1997-01-01
... be. This thesis defines the costs and benefits of the old C/SCSC, and then compares them. Additionally, this thesis discusses the changes accompanying the switch to EVMS and the effect on the costs and benefits...
-
Optimal switching using coherent control
DEFF Research Database (Denmark)
Kristensen, Philip Trøst; Heuck, Mikkel; Mørk, Jesper
2013-01-01
that the switching time, in general, is not limited by the cavity lifetime. Therefore, the total energy required for switching is a more relevant figure of merit than the switching speed, and for a particular two-pulse switching scheme we use calculus of variations to optimize the switching in terms of input energy....
-
Microbial screening methods for detection of antibiotic residues in slaughter animals
Pikkemaat, M.G.
2009-01-01
Monitoring of food products from animal origin for the presence of antimicrobial residues is preferably done using microbial screening methods because of their high cost-effectiveness. Traditionally applied methods fail to detect the maximum residue limits which were established when EU Council
-
Switch-connected HyperX network
Chen, Dong; Heidelberger, Philip
2018-02-13
A network system includes a plurality of sub-network planes and global switches. The sub-network planes have a same network topology as each other. Each of the sub-network planes includes edge switches. Each of the edge switches has N ports. Each of the global switches is configured to connect a group of edge switches at a same location in the sub-network planes. In each of the sub-network planes, some of the N ports of each of the edge switches are connected to end nodes, and others of the N ports are connected to other edge switches in the same sub-network plane, other of the N ports are connected to at least one of the global switches.
-
Minessale, Anthony
2012-01-01
This is a problem-solution approach to take your FreeSWITCH skills to the next level, where everything is explained in a practical way. If you are a system administrator, hobbyist, or someone who uses FreeSWITCH on a regular basis, this book is for you. Whether you are a FreeSWITCH expert or just getting started, this book will take your skills to the next level.
-
Upgraded wood residue fuels 1995
International Nuclear Information System (INIS)
Vinterbaeck, J.
1995-01-01
The Swedish market for upgraded residue fuels, i.e. briquettes, pellets and wood powder, has developed considerably during the nineties. The additional costs for the upgrading processes are regained and create a surplus in other parts of the system, e.g. in the form of higher combustion efficiencies, lower investment costs for burning equipment, lower operation costs and a diminished environmental impact. All these factors put together have resulted in a rapid growth of this part of the energy sector. In 1994 the production was 1.9 TWh, an increase of 37 % compared to the previous year. In the forthcoming heating season 1995/96 the production may reach 4 TWh. 57 refs, 11 figs, 6 tabs
-
LCT protective dump-switch tests
International Nuclear Information System (INIS)
Parsons, W.M.
1981-01-01
Each of the six coils in the Large Coil Task (LCT) has a separate power supply, dump resistor, and switching circuit. Each switching circuit contains five switches, two of which are redundant. The three remaining switches perform separate duties in an emergency dump situation. These three switches were tested to determine their ability to meet the LCT conditions
-
Emerging memories: resistive switching mechanisms and current status
International Nuclear Information System (INIS)
Jeong, Doo Seok; Thomas, Reji; Katiyar, R S; Scott, J F; Kohlstedt, H; Petraru, A; Hwang, Cheol Seong
2012-01-01
The resistance switching behaviour of several materials has recently attracted considerable attention for its application in non-volatile memory (NVM) devices, popularly described as resistive random access memories (RRAMs). RRAM is a type of NVM that uses a material(s) that changes the resistance when a voltage is applied. Resistive switching phenomena have been observed in many oxides: (i) binary transition metal oxides (TMOs), e.g. TiO 2 , Cr 2 O 3 , FeO x and NiO; (ii) perovskite-type complex TMOs that are variously functional, paraelectric, ferroelectric, multiferroic and magnetic, e.g. (Ba,Sr)TiO 3 , Pb(Zr x Ti 1−x )O 3 , BiFeO 3 and Pr x Ca 1−x MnO 3 ; (iii) large band gap high-k dielectrics, e.g. Al 2 O 3 and Gd 2 O 3 ; (iv) graphene oxides. In the non-oxide category, higher chalcogenides are front runners, e.g. In 2 Se 3 and In 2 Te 3 . Hence, the number of materials showing this technologically interesting behaviour for information storage is enormous. Resistive switching in these materials can form the basis for the next generation of NVM, i.e. RRAM, when current semiconductor memory technology reaches its limit in terms of density. RRAMs may be the high-density and low-cost NVMs of the future. A review on this topic is of importance to focus concentration on the most promising materials to accelerate application into the semiconductor industry. This review is a small effort to realize the ambitious goal of RRAMs. Its basic focus is on resistive switching in various materials with particular emphasis on binary TMOs. It also addresses the current understanding of resistive switching behaviour. Moreover, a brief comparison between RRAMs and memristors is included. The review ends with the current status of RRAMs in terms of stability, scalability and switching speed, which are three important aspects of integration onto semiconductors. (review article)
-
Emerging memories: resistive switching mechanisms and current status
Jeong, Doo Seok; Thomas, Reji; Katiyar, R. S.; Scott, J. F.; Kohlstedt, H.; Petraru, A.; Hwang, Cheol Seong
2012-07-01
The resistance switching behaviour of several materials has recently attracted considerable attention for its application in non-volatile memory (NVM) devices, popularly described as resistive random access memories (RRAMs). RRAM is a type of NVM that uses a material(s) that changes the resistance when a voltage is applied. Resistive switching phenomena have been observed in many oxides: (i) binary transition metal oxides (TMOs), e.g. TiO2, Cr2O3, FeOx and NiO; (ii) perovskite-type complex TMOs that are variously functional, paraelectric, ferroelectric, multiferroic and magnetic, e.g. (Ba,Sr)TiO3, Pb(Zrx Ti1-x)O3, BiFeO3 and PrxCa1-xMnO3 (iii) large band gap high-k dielectrics, e.g. Al2O3 and Gd2O3; (iv) graphene oxides. In the non-oxide category, higher chalcogenides are front runners, e.g. In2Se3 and In2Te3. Hence, the number of materials showing this technologically interesting behaviour for information storage is enormous. Resistive switching in these materials can form the basis for the next generation of NVM, i.e. RRAM, when current semiconductor memory technology reaches its limit in terms of density. RRAMs may be the high-density and low-cost NVMs of the future. A review on this topic is of importance to focus concentration on the most promising materials to accelerate application into the semiconductor industry. This review is a small effort to realize the ambitious goal of RRAMs. Its basic focus is on resistive switching in various materials with particular emphasis on binary TMOs. It also addresses the current understanding of resistive switching behaviour. Moreover, a brief comparison between RRAMs and memristors is included. The review ends with the current status of RRAMs in terms of stability, scalability and switching speed, which are three important aspects of integration onto semiconductors.
-
Mouse manipulation through single-switch scanning.
Blackstien-Adler, Susie; Shein, Fraser; Quintal, Janet; Birch, Shae; Weiss, Patrice L Tamar
2004-01-01
Given the current extensive reliance on the graphical user interface, independent access to computer software requires that users be able to manipulate a pointing device of some type (e.g., mouse, trackball) or be able to emulate a mouse by some other means (e.g., scanning). The purpose of the present study was to identify one or more optimal single-switch scanning mouse emulation strategies. Four alternative scanning strategies (continuous Cartesian, discrete Cartesian, rotational, and hybrid quadrant/continuous Cartesian) were selected for testing based on current market availability as well as on theoretical considerations of their potential speed and accuracy. Each strategy was evaluated using a repeated measures study design by means of a test program that permitted mouse emulation via any one of four scanning strategies in a motivating environment; response speed and accuracy could be automatically recorded and considered in view of the motor, cognitive, and perceptual demands of each scanning strategy. Ten individuals whose disabilities required them to operate a computer via single-switch scanning participated in the study. Results indicated that Cartesian scanning was the preferred and most effective scanning strategy. There were no significant differences between results from the Continuous Cartesian and Discrete Cartesian scanning strategies. Rotational scanning was quite slow with respect to the other strategies, although it was equally accurate. Hybrid Quadrant scanning improved access time but at the cost of fewer correct selections. These results demonstrated the importance of testing and comparing alternate single-switch scanning strategies.
-
Ardid, Salva; Wang, Xiao-Jing
2013-12-11
A hallmark of executive control is the brain's agility to shift between different tasks depending on the behavioral rule currently in play. In this work, we propose a "tweaking hypothesis" for task switching: a weak rule signal provides a small bias that is dramatically amplified by reverberating attractor dynamics in neural circuits for stimulus categorization and action selection, leading to an all-or-none reconfiguration of sensory-motor mapping. Based on this principle, we developed a biologically realistic model with multiple modules for task switching. We found that the model quantitatively accounts for complex task switching behavior: switch cost, congruency effect, and task-response interaction; as well as monkey's single-neuron activity associated with task switching. The model yields several testable predictions, in particular, that category-selective neurons play a key role in resolving sensory-motor conflict. This work represents a neural circuit model for task switching and sheds insights in the brain mechanism of a fundamental cognitive capability.
-
International Nuclear Information System (INIS)
Cleary, Julian; Wolf, Derek P.; Caspersen, John P.
2015-01-01
In part II of our two-part study, we estimate the nominal electricity generation and GHG (greenhouse gas) mitigation costs of using harvest residue from a hardwood forest in Ontario, Canada to fuel (1) a small-scale (250 kW e ) combined heat and power wood chip gasification unit and (2) a large-scale (211 MW e ) coal-fired generating station retrofitted to combust wood pellets. Under favorable operational and regulatory conditions, generation costs are similar: 14.1 and 14.9 cents per kWh (c/kWh) for the small- and large-scale facilities, respectively. However, GHG mitigation costs are considerably higher for the large-scale system: $159/tonne of CO 2 eq., compared to $111 for the small-scale counterpart. Generation costs increase substantially under existing conditions, reaching: (1) 25.5 c/kWh for the small-scale system, due to a regulation mandating the continual presence of an operating engineer; and (2) 22.5 c/kWh for the large-scale system due to insufficient biomass supply, which reduces plant capacity factor from 34% to 8%. Limited inflation adjustment (50%) of feed-in tariff rates boosts these costs by 7% to 11%. Results indicate that policy generalizations based on scale require careful consideration of the range of operational/regulatory conditions in the jurisdiction of interest. Further, if GHG mitigation is prioritized, small-scale systems may be more cost-effective. - Highlights: • Generation costs for two forest bioenergy systems of different scales are estimated. • Nominal electricity costs are 14.1–28.3 cents/kWh for the small-scale plant. • Nominal electricity costs are 14.9–24.2 cents/kWh for the large-scale plant. • GHG mitigation costs from displacing coal and LPG are $111-$281/tonne of CO 2 eq. • High sensitivity to cap. factor (large-scale) and labor requirements (small-scale)
-
Concept of an interlaced phased array for beam switching
Reddy, C. A.; Janardhanan, K. V.; Mukundan, K. K.; Shenoy, K. S. V.
1990-04-01
A novel concept is described for feeding and phasing a large linear array of N antenna elements using only three or five feed points and phase shifters and still achieving beam switching. The idea consists of drastically reducing the number of input points by interlacing a small number of serially fed subarrays which are suitably phased. This so-called interlaced phased array (IPA) concept was tested using an array of 15 four-element Yagi antennas with a spacing equal to 0.8 wavelengths and found feasible. Some of the distinct advantages of the IPA in comparison with a conventional system of beam switching are reduced power loss, reduced phasing errors, reduced cost, increased reliability resulting from greatly reduced number of phase shifters, and better symmetry of off-zenith beams.
-
Switch on, switch off: stiction in nanoelectromechanical switches
Wagner, Till J W
2013-06-13
We present a theoretical investigation of stiction in nanoscale electromechanical contact switches. We develop a mathematical model to describe the deflection of a cantilever beam in response to both electrostatic and van der Waals forces. Particular focus is given to the question of whether adhesive van der Waals forces cause the cantilever to remain in the \\'ON\\' state even when the electrostatic forces are removed. In contrast to previous studies, our theory accounts for deflections with large slopes (i.e. geometrically nonlinear). We solve the resulting equations numerically to study how a cantilever beam adheres to a rigid electrode: transitions between \\'free\\', \\'pinned\\' and \\'clamped\\' states are shown to be discontinuous and to exhibit significant hysteresis. Our findings are compared to previous results from linearized models and the implications for nanoelectromechanical cantilever switch design are discussed. © 2013 IOP Publishing Ltd.
-
Howard, Charla L; Wallace, Chris; Abbas, James; Stokic, Dobrivoje S
2017-01-01
We developed and evaluated properties of a new measure of variability in stride length and cadence, termed residual standard deviation (RSD). To calculate RSD, stride length and cadence are regressed against velocity to derive the best fit line from which the variability (SD) of the distance between the actual and predicted data points is calculated. We examined construct, concurrent, and discriminative validity of RSD using dual-task paradigm in 14 below-knee prosthesis users and 13 age- and education-matched controls. Subjects walked first over an electronic walkway while performing separately a serial subtraction and backwards spelling task, and then at self-selected slow, normal, and fast speeds used to derive the best fit line for stride length and cadence against velocity. Construct validity was demonstrated by significantly greater increase in RSD during dual-task gait in prosthesis users than controls (group-by-condition interaction, stride length p=0.0006, cadence p=0.009). Concurrent validity was established against coefficient of variation (CV) by moderate-to-high correlations (r=0.50-0.87) between dual-task cost RSD and dual-task cost CV for both stride length and cadence in prosthesis users and controls. Discriminative validity was documented by the ability of dual-task cost calculated from RSD to effectively differentiate prosthesis users from controls (area under the receiver operating characteristic curve, stride length 0.863, p=0.001, cadence 0.808, p=0.007), which was better than the ability of dual-task cost CV (0.692, 0.648, respectively, not significant). These results validate RSD as a new measure of variability in below-knee prosthesis users. Future studies should include larger cohorts and other populations to ascertain its generalizability. Copyright © 2016 Elsevier B.V. All rights reserved.
-
Control synthesis of switched systems
Zhao, Xudong; Niu, Ben; Wu, Tingting
2017-01-01
This book offers its readers a detailed overview of the synthesis of switched systems, with a focus on switching stabilization and intelligent control. The problems investigated are not only previously unsolved theoretically but also of practical importance in many applications: voltage conversion, naval piloting and navigation and robotics, for example. The book considers general switched-system models and provides more efficient design methods to bring together theory and application more closely than was possible using classical methods. It also discusses several different classes of switched systems. For general switched linear systems and switched nonlinear systems comprising unstable subsystems, it introduces novel ideas such as invariant subspace theory and the time-scheduled Lyapunov function method of designing switching signals to stabilize the underlying systems. For some typical switched nonlinear systems affected by various complex dynamics, the book proposes novel design approaches based on inte...
-
Energy Technology Data Exchange (ETDEWEB)
Chitnumsub, Penchit; Ittarat, Wanwipa; Jaruwat, Aritsara; Noytanom, Krittikar [National Center for Genetic Engineering and Biotechnology, 113 Thailand Science Park, Paholyothin Road, Klong 1, Klong Luang, Pathumthani 12120 (Thailand); Amornwatcharapong, Watcharee [Mahidol University, Bangkok (Thailand); Pornthanakasem, Wichai [National Center for Genetic Engineering and Biotechnology, 113 Thailand Science Park, Paholyothin Road, Klong 1, Klong Luang, Pathumthani 12120 (Thailand); Chaiyen, Pimchai [Mahidol University, Bangkok (Thailand); Yuthavong, Yongyuth; Leartsakulpanich, Ubolsree [National Center for Genetic Engineering and Biotechnology, 113 Thailand Science Park, Paholyothin Road, Klong 1, Klong Luang, Pathumthani 12120 (Thailand)
2014-06-01
The crystal structure of P. falciparum SHMT revealed snapshots of an intriguing disulfide/sulfhydryl switch controlling the functional activity. Plasmodium falciparum serine hydroxymethyltransferase (PfSHMT), an enzyme in the dTMP synthesis cycle, is an antimalarial target because inhibition of its expression or function has been shown to be lethal to the parasite. As the wild-type enzyme could not be crystallized, protein engineering of residues on the surface was carried out. The surface-engineered mutant PfSHMT-F292E was successfully crystallized and its structure was determined at 3 Å resolution. The PfSHMT-F292E structure is a good representation of PfSHMT as this variant revealed biochemical properties similar to those of the wild type. Although the overall structure of PfSHMT is similar to those of other SHMTs, unique features including the presence of two loops and a distinctive cysteine pair formed by Cys125 and Cys364 in the tetrahydrofolate (THF) substrate binding pocket were identified. These structural characteristics have never been reported in other SHMTs. Biochemical characterization and mutation analysis of these two residues confirm that they act as a disulfide/sulfhydryl switch to regulate the THF-dependent catalytic function of the enzyme. This redox switch is not present in the human enzyme, in which the cysteine pair is absent. The data reported here can be further exploited as a new strategy to specifically disrupt the activity of the parasite enzyme without interfering with the function of the human enzyme.
-
International Nuclear Information System (INIS)
Chitnumsub, Penchit; Ittarat, Wanwipa; Jaruwat, Aritsara; Noytanom, Krittikar; Amornwatcharapong, Watcharee; Pornthanakasem, Wichai; Chaiyen, Pimchai; Yuthavong, Yongyuth; Leartsakulpanich, Ubolsree
2014-01-01
The crystal structure of P. falciparum SHMT revealed snapshots of an intriguing disulfide/sulfhydryl switch controlling the functional activity. Plasmodium falciparum serine hydroxymethyltransferase (PfSHMT), an enzyme in the dTMP synthesis cycle, is an antimalarial target because inhibition of its expression or function has been shown to be lethal to the parasite. As the wild-type enzyme could not be crystallized, protein engineering of residues on the surface was carried out. The surface-engineered mutant PfSHMT-F292E was successfully crystallized and its structure was determined at 3 Å resolution. The PfSHMT-F292E structure is a good representation of PfSHMT as this variant revealed biochemical properties similar to those of the wild type. Although the overall structure of PfSHMT is similar to those of other SHMTs, unique features including the presence of two loops and a distinctive cysteine pair formed by Cys125 and Cys364 in the tetrahydrofolate (THF) substrate binding pocket were identified. These structural characteristics have never been reported in other SHMTs. Biochemical characterization and mutation analysis of these two residues confirm that they act as a disulfide/sulfhydryl switch to regulate the THF-dependent catalytic function of the enzyme. This redox switch is not present in the human enzyme, in which the cysteine pair is absent. The data reported here can be further exploited as a new strategy to specifically disrupt the activity of the parasite enzyme without interfering with the function of the human enzyme
-
International Nuclear Information System (INIS)
Czaplewski, David A; Nordquist, Christopher D; Dyck, Christopher W; Patrizi, Gary A; Kraus, Garth M; Cowan, William D
2012-01-01
We present lifetime limitations and failure analysis of many packaged RF MEMS ohmic contacting switches with Au–Au, Au–Ir, and Au–Pt contact materials operating with 100 µN of contact force per contact in hermetically sealed glass wall packages. All metals were tested using the same switch design in a controlled environment to provide a comparison between the performance of the different materials and their corresponding failure mechanisms. The switch lifetimes of the different contact materials varied from several hundred cycles to 200 million cycles with different mechanisms causing failures for different contact materials. Switches with Au–Au contacts failed due to adhesion when thoroughly cleaned while switches with dissimilar metal contacts (Au–Ir and Au–Pt) operated without adhesion failures but failed due to carbon accumulation on the contacts even in a clean, packaged environment as a result of the catalytic behavior of the contact materials. Switch lifetimes correlated inversely with catalytic behavior of the contact metals. The data suggests the path to increase switch lifetime is to use favorable catalytic materials as contacts, design switches with higher contact forces to break through any residual contamination, and use cleaner, probably smaller, packages. (paper)
-
Co-benefits of utilizing logging residues for bioenergy production: The case for East Texas, USA
International Nuclear Information System (INIS)
Gan, Jianbang; Smith, C.T.
2007-01-01
This study evaluated the co-benefits associated with the utilization of logging residues for electricity production in East Texas, USA. The benefits evaluated included the value of CO 2 emissions displaced due to substituting logging residues for coal in power generation, reductions in site preparation costs during forest regeneration, and creation of jobs and income in local communities. Based on the 2004 Forest Inventory Analysis data and a 70% biomass recovery rate, annual recoverable logging residues in East Texas were estimated at 1.3 Mt (dry). These residues, if used for electricity production, would displace about 2.44 Mt of CO 2 , valued at some 9M$ at the current CO 2 price traded at the Chicago Climate Exchange (accounting for about 2% of the stumpage value). Removing logging residues would also save $200-250 ha -1 in site preparation costs. In addition, input-output modeling revealed that logging residue procurement and electricity generation together would have a stronger ripple effect on employment than on output or value-added, with about 1340 new jobs created and 215M$ in value-added generated annually. These results offer new insights into the cost-competitiveness of forest biomass and bioenergy production. (author)
-
DOOM'd to switch: superior cognitive flexibility in players of first person shooter games
Directory of Open Access Journals (Sweden)
Lorenza S Colzato
2010-04-01
Full Text Available The interest in the influence of videogame experience on our daily life is constantly growing. “First Person Shooter” (FPS games require players to develop a flexible mindset to rapidly react to fast moving visual and auditory stimuli, and to switch back and forth between different subtasks. This study investigated whether and to which degree experience with such videogames generalizes to other cognitive control tasks. Video game players (VGPs and individuals with little to no videogame experience (NVGPs performed on a task switching paradigm that provides a relatively well-established diagnostic measure of cognitive flexibility. As predicted, VGPs showed smaller switching costs (i.e., greater cognitive flexibility than NVGPs. Our findings support the idea that playing FPS games promotes cognitive flexibility.
-
A network-flow based valve-switching aware binding algorithm for flow-based microfluidic biochips
DEFF Research Database (Denmark)
Tseng, Kai-Han; You, Sheng-Chi; Minhass, Wajid Hassan
2013-01-01
-flow based resource binding algorithm based on breadth-first search (BFS) and minimum cost maximum flow (MCMF) in architectural-level synthesis. The experimental results show that our methodology not only makes significant reduction of valve-switching activities but also diminishes the application completion......Designs of flow-based microfluidic biochips are receiving much attention recently because they replace conventional biological automation paradigm and are able to integrate different biochemical analysis functions on a chip. However, as the design complexity increases, a flow-based microfluidic...... biochip needs more chip-integrated micro-valves, i.e., the basic unit of fluid-handling functionality, to manipulate the fluid flow for biochemical applications. Moreover, frequent switching of micro-valves results in decreased reliability. To minimize the valve-switching activities, we develop a network...
-
Identification of insecticide residues with a conducting-polymer electronic nose
A.D. Wilson
2014-01-01
The identification of insecticide residues on crop foliage is needed to make periodic pest management decisions. Electronic-nose (e-nose) methods were developed and tested as a means of acquiring rapid identifications of insecticide residue types at relatively low cost by detection of headspace volatiles released from inert surfaces in vitro. Detection methods were...
-
Golomidov, Y. V.; Li, S. K.; Popov, S. A.; Smolov, V. B.
1986-01-01
After a classification and analysis of electronic and optoelectronic switching devices, the design principles and structure of a matrix optical switch is described. The switching and pair-exclusion operations in this type of switch are examined, and a method for the optical switching of communication channels is elaborated. Finally, attention is given to the structural organization of a parallel computer system with a matrix optical switch.
-
Residual flow patterns and morphological changes along a macro- and meso-tidal coastline
Leonardi, Nicoletta; Plater, Andrew James
2017-11-01
The hydrodynamic and residual transport patterns arising from oscillating tidal motion have important consequences for the transport of sediments, and for the evolution of the shoreline, especially under macro- and meso-tidal conditions. For many locations there are significant uncertainties about residual currents and sediment transport characteristics, and their possible influence on the morphological evolution of the coastline and on the character of the bed. Herein we use the coastline of SE England as a test case to investigate possible changes in residual currents, and residual transport patterns from neap to spring tide, the reciprocal interaction between residuals and the character of the bed, and the morphological evolution of the coastline at a century timescale. We found that in the long term the morphology of the system evolves toward a dynamic equilibrium configuration characterized by smaller, and spatially constant residual transport patterns. While the spatial distribution of residual currents maintains a similar trend during both neap and spring tide, during spring tide and for large areas residual currents switch between northerly and southerly directions, and their magnitude is doubled. Residual eddies develop in regions characterized by the presence of sand bars due to the interaction of the tide with the varying topography. Residual transport patterns are also computed for various sediment fractions, and based on the hydrodynamics and sediment availability at the bottom. We found that the distribution of sediments on the bed is significantly correlated with the intensity of residuals. Finally, the majority of long-term morphological changes tend to develop or augment sand banks features, with an increase in elevation and steepening of the bank contours.
-
Automatic Time Regulator for Switching on an Aeration Device for ...
African Journals Online (AJOL)
The need to aerate the pond at odd hours due to diurnal limit, save cost and human labor, necessitated the design of an automatic time regulator circuit, which controls the switching on and o of an aeration device at a pre determined and selected time interval (5mins., 10mins., 20mins., 30mins., and 40mins.) This design ...
-
Residual extrapolation operators for efficient wavefield construction
Alkhalifah, Tariq Ali
2013-01-01
and smooth media, the residual implementation based on velocity perturbation optimizes the use of this feature. Most of the other implementations based on the spectral approach are focussed on reducing cost by reducing the number of inverse Fourier transforms
-
High Voltage, Fast-Switching Module for Active Control of Magnetic Fields and Edge Plasma Currents
Ziemba, Timothy; Miller, Kenneth; Prager, James; Slobodov, Ilia
2016-10-01
Fast, reliable, real-time control of plasma is critical to the success of magnetic fusion science. High voltage and current supplies are needed to mitigate instabilities in all experiments as well as disruption events in large scale tokamaks for steady-state operation. Silicon carbide (SiC) MOSFETs offer many advantages over IGBTs including lower drive energy requirements, lower conduction and switching losses, and higher switching frequency capabilities; however, these devices are limited to 1.2-1.7 kV devices. As fusion enters the long-pulse and burning plasma eras, efficiency of power switching will be important. Eagle Harbor Technologies (EHT), Inc. developing a high voltage SiC MOSFET module that operates at 10 kV. This switch module utilizes EHT gate drive technology, which has demonstrated the ability to increase SiC MOSFET switching efficiency. The module will allow more rapid development of high voltage switching power supplies at lower cost necessary for the next generation of fast plasma feedback and control. EHT is partnering with the High Beta Tokamak group at Columbia to develop detailed high voltage module specifications, to ensure that the final product meets the needs of the fusion science community.
-
Households' switching behavior between electricity suppliers in Sweden
Energy Technology Data Exchange (ETDEWEB)
Ek, Kristina; Soederholm, Patrik [Economics Unit, Luleaa University of Technology, 971 87 Luleaa (Sweden)
2008-12-15
The overall purpose of this paper is to analyze the factors affecting households' decisions to: (a) switch to a new electricity supplier; and (b) actively renegotiate the electricity contract with the prevailing supplier. The study is based on 536 survey responses from Swedish households and they are analyzed econometrically using probit regression techniques. The analysis is based on a theoretical framework, which embraces both economic and psychological motives behind household decision-making. The results show that households that anticipate significant economic benefits from choosing a more active behavior are also more likely to purse this, while those with smaller potential gains (e.g., households without electric heating) are less likely to change supplier and/or renegotiate their contracts. The impact of overall electricity costs and knowledge about these is particularly important for the latter decision, while respondents that perceive relatively high search and information costs are less likely to switch to an alternative electricity supplier. Moreover, constraints on time, attention, and the ability to process information, may lead to optimizing analyses being replaced by imprecise routines and rules of thumb, and the benefits of the status quo appear to represent one of those simplifying rules. This also opens up for other influences on households' activity such as social interaction and media discourses that raise the attention level. Our results show that these influences are more likely to affect households' choice to switch to new service providers, i.e., the one area of the two investigated here that put the most demand on people's ability to search for and process information. (author)
-
Very high plasma switches. Basic plasma physics and switch technology
International Nuclear Information System (INIS)
Doucet, H.J.; Roche, M.; Buzzi, J.M.
1988-01-01
A review of some high power switches recently developed for very high power technology is made with a special attention to the aspects of plasma physics involved in the mechanisms, which determine the limits of the possible switching parameters
-
Graham, John D; Chang, Joice
2015-02-01
The use of table saws in the United States is associated with approximately 28,000 emergency department (ED) visits and 2,000 cases of finger amputation per year. This article provides a quantitative estimate of the economic benefits of automatic protection systems that could be designed into new table saw products. Benefits are defined as reduced health-care costs, enhanced production at work, and diminished pain and suffering. The present value of the benefits of automatic protection over the life of the table saw are interpreted as the switch-point cost value, the maximum investment in automatic protection that can be justified by benefit-cost comparison. Using two alternative methods for monetizing pain and suffering, the study finds switch-point cost values of $753 and $561 per saw. These point estimates are sensitive to the values of inputs, especially the average cost of injury. The various switch-point cost values are substantially higher than rough estimates of the incremental cost of automatic protection systems. Uncertainties and future research needs are discussed. © 2014 Society for Risk Analysis.
-
Selective activation of the superior frontal gyrus in task-switching: an event-related fNIRS study.
Cutini, Simone; Scatturin, Pietro; Menon, Enrica; Bisiacchi, Patrizia Silvia; Gamberini, Luciano; Zorzi, Marco; Dell'Acqua, Roberto
2008-08-15
In the task-switching paradigm, reaction time is longer and accuracy is worse in switch trials relative to repetition trials. This so-called switch cost has been ascribed to the engagement of control processes required to alternate between distinct stimulus-response mapping rules. Neuroimaging studies have reported an enhanced activation of the human lateral prefrontal cortex and the superior frontal gyrus during the task-switching paradigm. Whether neural activation in these regions is dissociable and associated with separable cognitive components of task switching has been a matter of recent debate. We used multi-channel near-infrared spectroscopy (fNIRS) to measure brain cortical activity in a task-switching paradigm designed to avoid task differences, order predictability, and frequency effects. The results showed a generalized bilateral activation of the lateral prefrontal cortex and the superior frontal gyrus in both switch trials and repetition trials. To isolate the activity selectively associated with the task-switch, the overall activity recorded during repetition trials was subtracted from the activity recorded during switch trials. Following subtraction, the remaining activity was entirely confined to the left portion of the superior frontal gyrus. The present results suggest that factors associated with load and maintenance of distinct stimulus-response mapping rules in working memory are likely contributors to the activation of the lateral prefrontal cortex, whereas only activity in the left superior frontal gyrus can be linked unequivocally to switching between distinct cognitive tasks.
-
Optical packet switched networks
DEFF Research Database (Denmark)
Hansen, Peter Bukhave
1999-01-01
Optical packet switched networks are investigated with emphasis on the performance of the packet switch blocks. Initially, the network context of the optical packet switched network is described showing that a packet network will provide transparency, flexibility and bridge the granularity gap...... in interferometric wavelength converters is investigated showing that a 10 Gbit/s 19 4x4 swich blocks can be cascaded at a BER of 10-14. An analytical traffic model enables the calculation of the traffice performance of a WDM packet network. Hereby the importance of WDM and wavelegth conversion in the switch blocks...... is established as a flexible means to reduce the optical buffer, e.g., the number of fibre delay lines for a 16x16 switch block is reduced from 23 to 6 by going from 2 to 8 wavelength channels pr. inlet. Additionally, a component count analysis is carried out to illustrate the trade-offs in the switch block...
-
Investigation of a metal-organic interface. Realization and understanding of a molecular switch
Energy Technology Data Exchange (ETDEWEB)
Neucheva, Olga [Forschungszentrum Juelich (DE). Institute of Bio- and Nanosystems (IBN), Functional Nanostructures at Surfaces (IBN-3)
2010-07-01
The field of molecular organic electronics is an emerging and very dynamic area. The continued trend to miniaturisation, combined with increasing complexity and cost of production in conventional semiconductor electronics, forces companies to turn their attention to alternatives that promise the next levels of scale at significantly lower cost. After consumer electronic devices based on organic transistors, such as TVs and book readers, have already been presented, molecular electronics is expected to offer the next breakthrough in feature size. Unfortunately, most of the organic/metal interfaces contain intrinsic defects that break the homogeneity of the interface properties. In this thesis, the electronic and structural properties of such defects were examined in order to understand the influence of the inhomogeneities on the quality of the interface layer. However, the main focus of this work was the investigation of the local properties of a single molecule. Taking advantage of the Scanning Tunnelling Microscope's (STM's) ability to act as a local probe, a single molecular switch was realized and studied. Moreover, in close collaboration with theory groups, the underlying mechanism driving the switching process was identified and described. Besides the investigation of the switching process, the ability of the STM to build nanostructures of different shapes from large organic molecules was shown. Knowing the parameters for realization and control of the switching process and for building the molecular corrals, the results of this investigation enable the reconstruction of the studied molecular ensemble and its deployment in electric molecular circuits, constituting a next step towards further miniaturization of electronic devices. (orig.)
-
Switch: a planning tool for power systems with large shares of intermittent renewable energy.
Fripp, Matthias
2012-06-05
Wind and solar power are highly variable, so it is it unclear how large a role they can play in future power systems. This work introduces a new open-source electricity planning model--Switch--that identifies the least-cost strategy for using renewable and conventional generators and transmission in a large power system over a multidecade period. Switch includes an unprecedented amount of spatial and temporal detail, making it possible to address a new type of question about the optimal design and operation of power systems with large amounts of renewable power. A case study of California for 2012-2027 finds that there is no maximum possible penetration of wind and solar power--these resources could potentially be used to reduce emissions 90% or more below 1990 levels without reducing reliability or severely raising the cost of electricity. This work also finds that policies that encourage customers to shift electricity demand to times when renewable power is most abundant (e.g., well-timed charging of electric vehicles) could make it possible to achieve radical emission reductions at moderate costs.
-
DEFF Research Database (Denmark)
Zhang, Yifeng; Wang, Yong; Angelidaki, Irini
2015-01-01
cell (MEC) and microbial fuel cell (MFC) mode of operation was developed to meet the challenges. In the MEC mode, a bioelectrochemical system (BES) produces H2O2 which reacts with Fenton's reagent (Fe II) to form hydroxyradical. The unused H2O2 (residual H2O2) is removed as electron acceptor...... by switching the system to MFC mode of operation. Complete decolorization and mineralization of 50 mg L−1 methylene blue (MB) was achieved in the MEC mode with apparent first order rate constants of 0.43 and 0.22 h−1, respectively. After switching to the MFC mode, residual H2O2 of 180 mg L−1 was removed...... at a removal rate of 4.61 mg L−1 h−1 while generating a maximum current density of 0.49 A m−2. The MB degradation and residual H2O2 removal were affected by external resistance, cathode pH and initial MB concentration. Furthermore, the system performance was enhanced under stack operation. This study provides...
-
Disposal of Rocky Flats residues as waste
International Nuclear Information System (INIS)
Dustin, D.F.; Sendelweck, V.S.
1993-01-01
Work is underway at the Rocky Flats Plant to evaluate alternatives for the removal of a large inventory of plutonium-contaminated residues from the plant. One alternative under consideration is to package the residues as transuranic wastes for ultimate shipment to the Waste Isolation Pilot Plant. Current waste acceptance criteria and transportation regulations require that approximately 1000 cubic yards of residues be repackaged to produce over 20,000 cubic yards of WIPP certified waste. The major regulatory drivers leading to this increase in waste volume are the fissile gram equivalent, surface radiation dose rate, and thermal power limits. In the interest of waste minimization, analyses have been conducted to determine, for each residue type, the controlling criterion leading to the volume increase, the impact of relaxing that criterion on subsequent waste volume, and the means by which rules changes may be implemented. The results of this study have identified the most appropriate changes to be proposed in regulatory requirements in order to minimize the costs of disposing of Rocky Flats residues as transuranic wastes
-
Ambrus, A; Füzesi, I; Susán, M; Dobi, D; Lantos, J; Zakar, F; Korsós, I; Oláh, J; Beke, B B; Katavics, L
2005-01-01
This paper reports the results of studies performed to investigate the potential of applying thin layer chromatography (TLC) detection in combination with selected extraction and cleanup methods, for providing an alternative cost-effective analytical procedure for screening and confirmation of pesticide residues in plant commodities. The extraction was carried out with ethyl acetate and an on-line extraction method applying an acetone-dichloromethane mixture. The extracts were cleaned up with SX-3 gel, an adsorbent mixture of active carbon, magnesia, and diatomaceous earth, and on silica micro cartridges. The Rf values of 118 pesticides were tested in eleven elution systems with UV, and eight biotest methods and chemical detection reagents. Cabbage, green peas, orange, and tomatoes were selected as representative sample matrices for fruits and vegetables, while maize, rice, and wheat represented cereal grains. As an internal quality control measure, marker compounds were applied on each plate to verify the proper elution and detection conditions. The Rf values varied in the different elution systems. The best separation (widest Rf range) was achieved with silica gel (SG)--ethyl acetate (0.05-0.7), SG--benzene, (0.02-0.7) and reverse phase RP-18 F-254S layer with acetone: methanol: water/30:30:30 (v/v) (0.1-0.8). The relative standard deviation of Rf values (CV(Rf)) within laboratory reproducibility was generally less than 20%, except below 0.2 Rf, where the CVRf rapidly increased with decreasing Rf values. The fungi spore inhibition, chloroplast inhibition, and enzyme inhibition were found most suitable for detection of pesticides primarily for confirming their identity or screening for known substances. Their use for determination of pesticide residues in samples of unknown origin is not recommended.
-
Robust Fault Detection for Switched Fuzzy Systems With Unknown Input.
Han, Jian; Zhang, Huaguang; Wang, Yingchun; Sun, Xun
2017-10-03
This paper investigates the fault detection problem for a class of switched nonlinear systems in the T-S fuzzy framework. The unknown input is considered in the systems. A novel fault detection unknown input observer design method is proposed. Based on the proposed observer, the unknown input can be removed from the fault detection residual. The weighted H∞ performance level is considered to ensure the robustness. In addition, the weighted H₋ performance level is introduced, which can increase the sensibility of the proposed detection method. To verify the proposed scheme, a numerical simulation example and an electromechanical system simulation example are provided at the end of this paper.
-
Itoh, Shoji; Sugihara, Masaaki
2016-01-01
We present a theorem that defines the direction of a preconditioned system for the bi-conjugate gradient (BiCG) method, and we extend it to preconditioned bi-Lanczos-type algorithms. We show that the direction of a preconditioned system is switched by construction and by the settings of the initial shadow residual vector. We analyze and compare the polynomial structures of four preconditioned BiCG algorithms.
-
A soft-switching coupled inductor bidirectional DC-DC converter with high-conversion ratio
Chao, Kuei-Hsiang; Jheng, Yi-Cing
2018-01-01
A soft-switching bidirectional DC-DC converter is presented herein as a way to improve the conversion efficiency of a photovoltaic (PV) system. Adoption of coupled inductors enables the presented converter not only to provide a high-conversion ratio but also to suppress the transient surge voltage via the release of the energy stored in leakage flux of the coupled inductors, and the cost can kept down consequently. A combined use of a switching mechanism and an auxiliary resonant branch enables the converter to successfully perform zero-voltage switching operations on the main switches and improves the efficiency accordingly. It was testified by experiments that our proposed converter works relatively efficiently in full-load working range. Additionally, the framework of the converter intended for testifying has high-conversion ratio. The results of a test, where a generating system using PV module array coupled with batteries as energy storage device was used as the low-voltage input side, and DC link was used as high-voltage side, demonstrated our proposed converter framework with high-conversion ratio on both high-voltage and low-voltage sides.
-
Blast furnace residues for arsenic removal from mining-contaminated groundwater.
Carrillo-Pedroza, Fco Raúl; Soria-Aguilar, Ma de Jesús; Martínez-Luevanos, Antonia; Narvaez-García, Víctor
2014-01-01
In this work, blast furnace (BF) residues were well characterized and then evaluated as an adsorbent material for arsenic removal from a mining-contaminated groundwater. The adsorption process was analysed using the theories of Freundlich and Langmuir. BF residues were found to be an effective sorbent for As (V) ions. The modelling of adsorption isotherms by empirical models shows that arsenate adsorption is fitted by the Langmuir model, suggesting a monolayer adsorption of arsenic onto adsorbents. Arsenate adsorption onto BF residue is explained by the charge density surface affinity and by the formation of Fe (II) and Fe (III) corrosion products onto BF residue particles. The results indicate that BF residues represent an attractive low-cost absorbent option for the removal of arsenic in wastewater treatment.
-
Recent advances in residual stress measurement
International Nuclear Information System (INIS)
Withers, P.J.; Turski, M.; Edwards, L.; Bouchard, P.J.; Buttle, D.J.
2008-01-01
Until recently residual stresses have been included in structural integrity assessments of nuclear pressure vessels and piping in a very primitive manner due to the lack of reliable residual stress measurement or prediction tools. This situation is changing the capabilities of newly emerging destructive (i.e. the contour method) and non-destructive (i.e. magnetic and high-energy synchrotron X-ray strain mapping) residual stress measurement techniques for evaluating ferritic and austenitic pressure vessel components are contrasted against more well-established methods. These new approaches offer the potential for obtaining area maps of residual stress or strain in welded plants, mock-up components or generic test-pieces. The mapped field may be used directly in structural integrity calculations, or indirectly to validate finite element process/structural models on which safety cases for pressurised nuclear systems are founded. These measurement methods are complementary in terms of application to actual plant, cost effectiveness and measurements in thick sections. In each case an exemplar case study is used to illustrate the method and to highlight its particular capabilities
-
Residual Resistance Data from Cavity Production Projects at Jefferson Lab
International Nuclear Information System (INIS)
Ciovati, Gianluigi; Geng, Rongli; Mammosser, John; Saunders, Jeffrey
2010-01-01
A fundamental limitation towards achieving high quality factors in superconducting radio-frequency cavities is the so-called residual resistance. Understanding and controlling the residual resistance has important implications towards improving the efficiency and reduce the operating cost of continuous wave superconducting linear accelerators. In this contribution we will report on the residual resistance values obtained from measurements of the quality factor of a large set of cavities, with resonant frequency between 805 MHz and 1.5 GHz, all of them processed and tested at Jefferson Lab. Surface treatments included both buffered chemical polishing and electropolishing. The results indicate an approximate value of the residual resistance of about 7-10 n Omega.
-
Optical switching systems using nanostructures
DEFF Research Database (Denmark)
Stubkjær, Kristian
2004-01-01
High capacity multiservice optical networks require compact and efficient switches. The potential benefits of optical switch elements based on nanostructured material are reviewed considering various material systems.......High capacity multiservice optical networks require compact and efficient switches. The potential benefits of optical switch elements based on nanostructured material are reviewed considering various material systems....
-
Practical switching power supply design
Brown, Martin C
1990-01-01
Take the ""black magic"" out of switching power supplies with Practical Switching Power Supply Design! This is a comprehensive ""hands-on"" guide to the theory behind, and design of, PWM and resonant switching supplies. You'll find information on switching supply operation and selecting an appropriate topology for your application. There's extensive coverage of buck, boost, flyback, push-pull, half bridge, and full bridge regulator circuits. Special attention is given to semiconductors used in switching supplies. RFI/EMI reduction, grounding, testing, and safety standards are also deta
-
Impact of information cost and switching of trading strategies in an artificial stock market
Liu, Yi-Fang; Zhang, Wei; Xu, Chao; Vitting Andersen, Jørgen; Xu, Hai-Chuan
2014-08-01
This paper studies the switching of trading strategies and its effect on the market volatility in a continuous double auction market. We describe the behavior when some uninformed agents, who we call switchers, decide whether or not to pay for information before they trade. By paying for the information they behave as informed traders. First we verify that our model is able to reproduce some of the stylized facts in real financial markets. Next we consider the relationship between switching and the market volatility under different structures of investors. We find that there exists a positive relationship between the market volatility and the percentage of switchers. We therefore conclude that the switchers are a destabilizing factor in the market. However, for a given fixed percentage of switchers, the proportion of switchers that decide to buy information at a given moment of time is negatively related to the current market volatility. In other words, if more agents pay for information to know the fundamental value at some time, the market volatility will be lower. This is because the market price is closer to the fundamental value due to information diffusion between switchers.
-
Committing to coal and gas: Long-term contracts, regulation, and fuel switching in power generation
Rice, Michael
Fuel switching in the electricity sector has important economic and environmental consequences. In the United States, the increased supply of gas during the last decade has led to substantial switching in the short term. Fuel switching is constrained, however, by the existing infrastructure. The power generation infrastructure, in turn, represents commitments to specific sources of energy over the long term. This dissertation explores fuel contracts as the link between short-term price response and long-term plant investments. Contracting choices enable power plant investments that are relationship-specific, often regulated, and face uncertainty. Many power plants are subject to both hold-up in investment and cost-of-service regulation. I find that capital bias is robust when considering either irreversibility or hold-up due to the uncertain arrival of an outside option. For sunk capital, the rental rate is inappropriate for determining capital bias. Instead, capital bias depends on the regulated rate of return, discount rate, and depreciation schedule. If policies such as emissions regulations increase fuel-switching flexibility, this can lead to capital bias. Cost-of-service regulation can shorten the duration of a long-term contract. From the firm's perspective, the existing literature provides limited guidance when bargaining and writing contracts for fuel procurement. I develop a stochastic programming framework to optimize long-term contracting decisions under both endogenous and exogenous sources of hold-up risk. These typically include policy changes, price shocks, availability of fuel, and volatility in derived demand. For price risks, the optimal contract duration is the moment when the expected benefits of the contract are just outweighed by the expected opportunity costs of remaining in the contract. I prove that imposing early renegotiation costs decreases contract duration. Finally, I provide an empirical approach to show how coal contracts can limit
-
Stanley, H. E.; Buldyrev, S. V.; Franzese, G.; Havlin, S.; Mallamace, F.; Mazza, M. G.; Kumar, P.; Plerou, V.; Preis, T.; Stokely, K.; Xu, L.
One challenge of biology, medicine, and economics is that the systems treated by these serious scientific disciplines can suddenly "switch" from one behavior to another, even though they possess no perfect metronome in time. As if by magic, out of nothing but randomness one finds remarkably fine-tuned processes in time. The past century has, philosophically, been concerned with placing aside the human tendency to see the universe as a fine-tuned machine. Here we will address the challenge of uncovering how, through randomness (albeit, as we shall see, strongly correlated randomness), one can arrive at some of the many temporal patterns in physics, economics, and medicine and even begin to characterize the switching phenomena that enable a system to pass from one state to another. We discuss some applications of correlated randomness to understanding switching phenomena in various fields. Specifically, we present evidence from experiments and from computer simulations supporting the hypothesis that water's anomalies are related to a switching point (which is not unlike the "tipping point" immortalized by Malcolm Gladwell), and that the bubbles in economic phenomena that occur on all scales are not "outliers" (another Gladwell immortalization).
-
Janssen, L.J.J.; Hoogland, J.G.
1970-01-01
During electrolysis of an acid chloride soln., at. Cl is taken up by a graphite anode. After switching off the current, the evolution of mol. Cl continues. This phenomenon is designated as residual gas evolution (RGE). The mol. Cl is formed according to the Volmer-Heyrovsky mechanism, Clads + e ->
-
Complementary resistive switching in BaTiO3/NiO bilayer with opposite switching polarities
Li, Shuo; Wei, Xianhua; Lei, Yao; Yuan, Xincai; Zeng, Huizhong
2016-12-01
Resistive switching behaviors have been investigated in the Au/BaTiO3/NiO/Pt structure by stacking the two elements with different switching types. The conducting atomic force microscope measurements on BaTiO3 thin films and NiO thin films suggest that with the same active resistive switching region, the switching polarities in the two semiconductors are opposite to each other. It is in agreement with the bipolar hysteresis I-V curves with opposite switching polarities for single-layer devices. The bilayer devices show complementary resistive switching (CRS) without electroforming and unipolar resistive switching (URS) after electroforming. The coexistence of CRS and URS is mainly ascribed to the co-effect of electric field and Joule heating mechanisms, indicating that changeable of resistance in this device is dominated by the redistribution of oxygen vacancies in BaTiO3 and the formation, disruption, restoration of conducting filaments in NiO. CRS in bilayer with opposite switching polarities is effective to solve the sneak current without the introduction of any selector elements or an additional metal electrode.
-
Optimization of multi-branch switched diversity systems
Nam, Haewoon
2009-10-01
A performance optimization based on the optimal switching threshold(s) for a multi-branch switched diversity system is discussed in this paper. For the conventional multi-branch switched diversity system with a single switching threshold, the optimal switching threshold is a function of both the average channel SNR and the number of diversity branches, where computing the optimal switching threshold is not a simple task when the number of diversity branches is high. The newly proposed multi-branch switched diversity system is based on a sequence of switching thresholds, instead of a single switching threshold, where a different diversity branch uses a different switching threshold for signal comparison. Thanks to the fact that each switching threshold in the sequence can be optimized only based on the number of the remaining diversity branches, the proposed system makes it easy to find these switching thresholds. Furthermore, some selected numerical and simulation results show that the proposed switched diversity system with the sequence of optimal switching thresholds outperforms the conventional system with the single optimal switching threshold. © 2009 IEEE.
-
Hybrid switch for resonant power converters
Lai, Jih-Sheng; Yu, Wensong
2014-09-09
A hybrid switch comprising two semiconductor switches connected in parallel but having different voltage drop characteristics as a function of current facilitates attainment of zero voltage switching and reduces conduction losses to complement reduction of switching losses achieved through zero voltage switching in power converters such as high-current inverters.
-
Stephan, Denise Nadine; Koch, Iring
2016-11-01
The present study was aimed at examining modality-specific influences in task switching. To this end, participants switched either between modality compatible tasks (auditory-vocal and visual-manual) or incompatible spatial discrimination tasks (auditory-manual and visual-vocal). In addition, auditory and visual stimuli were presented simultaneously (i.e., bimodally) in each trial, so that selective attention was required to process the task-relevant stimulus. The inclusion of bimodal stimuli enabled us to assess congruence effects as a converging measure of increased between-task interference. The tasks followed a pre-instructed sequence of double alternations (AABB), so that no explicit task cues were required. The results show that switching between two modality incompatible tasks increases both switch costs and congruence effects compared to switching between two modality compatible tasks. The finding of increased congruence effects in modality incompatible tasks supports our explanation in terms of ideomotor "backward" linkages between anticipated response effects and the stimuli that called for this response in the first place. According to this generalized ideomotor idea, the modality match between response effects and stimuli would prime selection of a response in the compatible modality. This priming would cause increased difficulties to ignore the competing stimulus and hence increases the congruence effect. Moreover, performance would be hindered when switching between modality incompatible tasks and facilitated when switching between modality compatible tasks.
-
Timer switch to convert suction apparatus for negative pressure wound therapy application
Directory of Open Access Journals (Sweden)
Surath Amarnath
2014-01-01
Full Text Available Background: Negative pressure wound therapy (NPWT is an established modality in the treatment of chronic wounds, open fractures, and post-operative wound problems. This method has not been widely used due to the high cost of equipment and consumables. This study demonstrates an indigenously developed apparatus which gives comparable results at a fraction of the cost. Readily available materials are used for the air-tight dressing. Materials and Methods: Equipment consists of suction apparatus with adjustable pressure valve set to a pressure 125-150 mmHg. An electronic timer switch with a sequential working time of 5 min and a standby time of 3 min provides the required intermittent negative pressure. Readily available materials such as polyvinyl alcohol sponge, suction drains and steridrapes were used to provide an air tight wound cover. Results: A total of 90 cases underwent 262 NPWT applications from 2009 to 2014. This series, comprised of 30 open fractures, 21 post-operative and 39 chronic wounds. The wound healing rate in our study was comparable to other published studies using NPWT. Conclusion: The addition of electronic timer switch will convert a suction apparatus into NPWT machine, and the results are equally effective compared to more expensive counter parts. The use of indigenous dressing materials reduces the cost significantly.
-
International Nuclear Information System (INIS)
Kato, Koichi; Matsunaga, Chigusa; Odaka, Asano; Yamato, Sumie; Takaha, Wakana; Shimada, Ichio; Arata, Yoji
1991-01-01
A 13 C NMR study is reported of switch variant anti-dansyl antibodies, which possess the identical V H , V L , and C L domains in conjunction with highly homologous but not identical heavy-chain constant regions. Each of the antibodies has been selectively labeled with 13 C at the carbonyl carbon of Trp, Tyr, His, or Cys residue by growing hybridoma cells in serum-free medium. Spectral assignments have been made by folowing the procedure described previously for the switch variant antibodies labeled with [1- 13 C]Met. On the basis of the spectral data collected for the antibodies and their proteolytic fragments, the authors discuss how 13 C NMR spectroscopy can be used for the structural analyses of antigen binding and also of domain-domain interactions in the antibody molecule
-
Tutorial: Integrated-photonic switching structures
Soref, Richard
2018-02-01
Recent developments in waveguided 2 × 2 and N × M photonic switches are reviewed, including both broadband and narrowband resonant devices for the Si, InP, and AlN platforms. Practical actuation of switches by electro-optical and thermo-optical techniques is discussed. Present datacom-and-computing applications are reviewed, and potential applications are proposed for chip-scale photonic and optoelectronic integrated switching networks. Potential is found in the reconfigurable, programmable "mesh" switches that enable a promising group of applications in new areas beyond those in data centers and cloud servers. Many important matrix switches use gated semiconductor optical amplifiers. The family of broadband, directional-coupler 2 × 2 switches featuring two or three side-coupled waveguides deserves future experimentation, including devices that employ phase-change materials. The newer 2 × 2 resonant switches include standing-wave resonators, different from the micro-ring traveling-wave resonators. The resonant devices comprise nanobeam interferometers, complex-Bragg interferometers, and asymmetric contra-directional couplers. Although the fast, resonant devices offer ultralow switching energy, ˜1 fJ/bit, they have limitations. They require several trade-offs when deployed, but they do have practical application.
-
Assessment of procurement systems for unutilized logging residues ...
African Journals Online (AJOL)
... in the forest after clear-cutting operation with cutto- length harvesting method. ... as system-2 can be preferable for the initial supply chain configuration in Turkey. ... Key words: logging residue, forest biomass, chipping, supply cost, biomass ...
-
Directory of Open Access Journals (Sweden)
Natalie J Gauld
Full Text Available Despite similarities in health systems and Trans-Tasman Harmonization of medicines scheduling, New Zealand is more active than Australia in 'switching' (reclassifying medicines from prescription to non-prescription.To identify and compare enablers and barriers to switch in New Zealand and Australia.We conducted and analyzed 27 in-depth personal interviews with key participants in NZ and Australia and international participants previously located in Australia, and analyzed records of meetings considering switches (2000-2013. Analysis of both sets of data entailed a heuristic qualitative approach that embraced the lead researcher's knowledge and experience.The key themes identified were conservatism and political influences in Australia, and an open attitude, proactivity and flexibility in NZ. Pharmacist-only medicine schedules and individuals holding a progressive attitude were proposed to facilitate switch in both countries. A pharmacy retail group drove many switches in NZ ('third-party switch', unlike Australia. Barriers to switch in both countries included small market sizes, funding of prescription medicines and cost of doctor visits, and lack of market exclusivity. In Australia, advertising limitations for pharmacist-only medicines reportedly discouraged industry from submitting switch applications. Perceptions of pharmacy performance could help or hinder switches.Committee and regulator openness to switch, and confidence in pharmacy appear to influence consumer access to medicines. The pharmacist-only medicine schedule in Australasia and the rise of third-party switch and flexibility in switch in NZ could be considered elsewhere to enable switch.
-
Gauld, Natalie J; Kelly, Fiona S; Emmerton, Lynne M; Buetow, Stephen A
2015-01-01
Despite similarities in health systems and Trans-Tasman Harmonization of medicines scheduling, New Zealand is more active than Australia in 'switching' (reclassifying) medicines from prescription to non-prescription. To identify and compare enablers and barriers to switch in New Zealand and Australia. We conducted and analyzed 27 in-depth personal interviews with key participants in NZ and Australia and international participants previously located in Australia, and analyzed records of meetings considering switches (2000-2013). Analysis of both sets of data entailed a heuristic qualitative approach that embraced the lead researcher's knowledge and experience. The key themes identified were conservatism and political influences in Australia, and an open attitude, proactivity and flexibility in NZ. Pharmacist-only medicine schedules and individuals holding a progressive attitude were proposed to facilitate switch in both countries. A pharmacy retail group drove many switches in NZ ('third-party switch'), unlike Australia. Barriers to switch in both countries included small market sizes, funding of prescription medicines and cost of doctor visits, and lack of market exclusivity. In Australia, advertising limitations for pharmacist-only medicines reportedly discouraged industry from submitting switch applications. Perceptions of pharmacy performance could help or hinder switches. Committee and regulator openness to switch, and confidence in pharmacy appear to influence consumer access to medicines. The pharmacist-only medicine schedule in Australasia and the rise of third-party switch and flexibility in switch in NZ could be considered elsewhere to enable switch.
-
Howard, Natasha; Guinness, Lorna; Rowland, Mark; Durrani, Naeem; Hansen, Kristian S
2017-10-01
Financing of malaria control for displaced populations is limited in scope and duration, making cost-effectiveness analyses relevant but difficult. This study analyses cost-effectiveness of adding prevention through targeted indoor residual spraying (IRS) to case management in Afghan refugee settlements in Pakistan during a prolonged malaria epidemic. An intervention study design was selected, taking a societal perspective. Provider and household costs of vector control and case management were collected from provider records and community survey. Health outcomes (e.g. cases and DALYs averted) were derived and incremental cost-effectiveness ratios (ICERs) for cases prevented and DALYs averted calculated. Population, treatment cost, women's time, days of productivity lost, case fatality rate, cases prevented, and DALY assumptions were tested in sensitivity analysis. Malaria incidence peaked at 44/1,000 population in year 2, declining to 14/1,000 in year 5. In total, 370,000 malaria cases, 80% vivax, were diagnosed and treated and an estimated 67,988 vivax cases and 18,578 falciparum and mixed cases prevented. Mean annual programme cost per capita was US$0.56. The additional cost of including IRS over five years per case prevented was US$39; US$50 for vivax (US$43 in years 1-3, US$80 in years 4-5) and US$182 for falciparum (US$139 in years 1-3 and US$680 in years 4-5). Per DALY averted this was US$266 (US$220 in years 1-3 and US$486 in years 4-5) and thus 'highly cost-effective' or cost-effective using WHO and comparison thresholds. Adding IRS was cost-effective in this moderate endemicity, low mortality setting. It was more cost-effective when transmission was highest, becoming less so as transmission reduced. Because vivax was three times more common than falciparum and the case fatality rate was low, cost-effectiveness estimations for cases prevented appear reliable and more definitive for vivax malaria.
-
Generalized Multi-Cell Switched-Inductor and Switched-Capacitor Z-source Inverters
DEFF Research Database (Denmark)
Li, Ding; Chiang Loh, Poh; Zhu, Miao
2013-01-01
. Their boosting gains are, therefore, limited in practice. To overcome these shortcomings, the generalized switched-inductor and switched-capacitor Z-source inverters are proposed, whose extra boosting abilities and other advantages have already been verified in simulation and experiment....
-
Complementary resistive switching in BaTiO{sub 3}/NiO bilayer with opposite switching polarities
Energy Technology Data Exchange (ETDEWEB)
Li, Shuo [State Key Laboratory Cultivation Base for Nonmetal Composites and Functional Materials, Southwest University of Science and Technology, Mianyang 621010 (China); Institut d’Electronique de Micro-électronique et de Nanotechnologie (IEMN), CNRS, Université des Sciences et Technologies de Lille, avenue Poincaré, BP 60069, 59652, Villeneuve d’Ascq cedex (France); Wei, Xianhua, E-mail: weixianhua@swust.edu.cn [State Key Laboratory Cultivation Base for Nonmetal Composites and Functional Materials, Southwest University of Science and Technology, Mianyang 621010 (China); Lei, Yao [State Key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronics Science and Technology of China, Chengdu 610054 (China); Yuan, Xincai [State Key Laboratory Cultivation Base for Nonmetal Composites and Functional Materials, Southwest University of Science and Technology, Mianyang 621010 (China); Zeng, Huizhong [State Key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronics Science and Technology of China, Chengdu 610054 (China)
2016-12-15
Graphical abstract: Au/BaTiO{sub 3}/NiO/Pt bilayer device shows complementary resistive switching (CRS) without electroforming which is mainly ascribed to anti-serial stack of two RRAM cells with bipolar behaviors. - Highlights: • Complementary resistive switching (CRS) has been investigated in Au/BaTiO{sub 3}/NiO/Pt by stacking the two elements with different switching types. • The realization of complementary resistive switching (CRS) is mainly ascribed to the anti-serial stack of two RRAM cells with bipolar behaviors. • Complementary resistive switching (CRS) in bilayer is effective to solve the sneak current problem briefly and economically. - Abstract: Resistive switching behaviors have been investigated in the Au/BaTiO{sub 3}/NiO/Pt structure by stacking the two elements with different switching types. The conducting atomic force microscope measurements on BaTiO{sub 3} thin films and NiO thin films suggest that with the same active resistive switching region, the switching polarities in the two semiconductors are opposite to each other. It is in agreement with the bipolar hysteresis I–V curves with opposite switching polarities for single-layer devices. The bilayer devices show complementary resistive switching (CRS) without electroforming and unipolar resistive switching (URS) after electroforming. The coexistence of CRS and URS is mainly ascribed to the co-effect of electric field and Joule heating mechanisms, indicating that changeable of resistance in this device is dominated by the redistribution of oxygen vacancies in BaTiO{sub 3} and the formation, disruption, restoration of conducting filaments in NiO. CRS in bilayer with opposite switching polarities is effective to solve the sneak current without the introduction of any selector elements or an additional metal electrode.
-
Managing woodwaste: Yield from residue
Energy Technology Data Exchange (ETDEWEB)
Nielson, E. [LNS Services, Inc., North Vancouver, British Columbia (Canada); Rayner, S. [Pacific Waste Energy Inc., Burnaby, British Columbia (Canada)
1993-12-31
Historically, the majority of sawmill waste has been burned or buried for the sole purpose of disposal. In most jurisdictions, environmental legislation will prohibit, or render uneconomic, these practices. Many reports have been prepared to describe the forest industry`s residue and its environmental effect; although these help those looking for industry-wide or regional solutions, such as electricity generation, they have limited value for the mill manager, who has the on-hands responsibility for generation and disposal of the waste. If the mill manager can evaluate waste streams and break them down into their usable components, he can find niche market solutions for portions of the plant residue and redirect waste to poor/no-return, rather than disposal-cost, end uses. In the modern mill, residue is collected at the individual machine centre by waste conveyors that combine and mix sawdust, shavings, bark, etc. and send the result to the hog-fuel pile. The mill waste system should be analyzed to determine the measures that can improve the quality of residues and determine the volumes of any particular category before the mixing, mentioned above, occurs. After this analysis, the mill may find a niche market for a portion of its woodwaste.
-
Optically triggered high voltage switch network and method for switching a high voltage
El-Sharkawi, Mohamed A.; Andexler, George; Silberkleit, Lee I.
1993-01-19
An optically triggered solid state switch and method for switching a high voltage electrical current. A plurality of solid state switches (350) are connected in series for controlling electrical current flow between a compensation capacitor (112) and ground in a reactive power compensator (50, 50') that monitors the voltage and current flowing through each of three distribution lines (52a, 52b and 52c), which are supplying three-phase power to one or more inductive loads. An optical transmitter (100) controlled by the reactive power compensation system produces light pulses that are conveyed over optical fibers (102) to a switch driver (110') that includes a plurality of series connected optical triger circuits (288). Each of the optical trigger circuits controls a pair of the solid state switches and includes a plurality of series connected resistors (294, 326, 330, and 334) that equalize or balance the potential across the plurality of trigger circuits. The trigger circuits are connected to one of the distribution lines through a trigger capacitor (340). In each switch driver, the light signals activate a phototransistor (300) so that an electrical current flows from one of the energy reservoir capacitors through a pulse transformer (306) in the trigger circuit, producing gate signals that turn on the pair of serially connected solid state switches (350).
-
Optically triggered high voltage switch network and method for switching a high voltage
Energy Technology Data Exchange (ETDEWEB)
El-Sharkawi, Mohamed A. (Renton, WA); Andexler, George (Everett, WA); Silberkleit, Lee I. (Mountlake Terrace, WA)
1993-01-19
An optically triggered solid state switch and method for switching a high voltage electrical current. A plurality of solid state switches (350) are connected in series for controlling electrical current flow between a compensation capacitor (112) and ground in a reactive power compensator (50, 50') that monitors the voltage and current flowing through each of three distribution lines (52a, 52b and 52c), which are supplying three-phase power to one or more inductive loads. An optical transmitter (100) controlled by the reactive power compensation system produces light pulses that are conveyed over optical fibers (102) to a switch driver (110') that includes a plurality of series connected optical triger circuits (288). Each of the optical trigger circuits controls a pair of the solid state switches and includes a plurality of series connected resistors (294, 326, 330, and 334) that equalize or balance the potential across the plurality of trigger circuits. The trigger circuits are connected to one of the distribution lines through a trigger capacitor (340). In each switch driver, the light signals activate a phototransistor (300) so that an electrical current flows from one of the energy reservoir capacitors through a pulse transformer (306) in the trigger circuit, producing gate signals that turn on the pair of serially connected solid state switches (350).
-
Karle, James W; Watter, Scott; Shedden, Judith M
2010-05-01
Research into the perceptual and cognitive effects of playing video games is an area of increasing interest for many investigators. Over the past decade, expert video game players (VGPs) have been shown to display superior performance compared to non-video game players (nVGPs) on a range of visuospatial and attentional tasks. A benefit of video game expertise has recently been shown for task switching, suggesting that VGPs also have superior cognitive control abilities compared to nVGPs. In two experiments, we examined which aspects of task switching performance this VGP benefit may be localized to. With minimal trial-to-trial interference from minimally overlapping task set rules, VGPs demonstrated a task switching benefit compared to nVGPs. However, this benefit disappeared when proactive interference between tasks was increased, with substantial stimulus and response overlap in task set rules. We suggest that VGPs have no generalized benefit in task switching-related cognitive control processes compared to nVGPs, with switch cost reductions due instead to a specific benefit in controlling selective attention. Copyright 2009 Elsevier B.V. All rights reserved.
-
Directory of Open Access Journals (Sweden)
Anna eSoveri
2011-08-01
Full Text Available Several studies have suggested a bilingual advantage in executive functions, presumably due to bilinguals’ massive practice with language switching that requires executive resources, but the results are still somewhat controversial. Previous studies are also plagued by the inherent limitations of a natural groups design where the participant groups are bound to differ in many ways in addition to the variable used to classify them. In an attempt to introduce a complementary analysis approach, we employed multiple regression to study whether the performance of 30-75-year-old Finnish-Swedish bilinguals (n= 38 on tasks measuring different executive functions (inhibition, updating, and set shifting could be predicted by the frequency of language switches in everyday life (as measured by a language switching questionnaire, L2 age of acquisition, or by the self-estimated degree of use of both languages in everyday life. Most consistent effects were found for the set shifting task where a higher rate of everyday language switches was related to a smaller mixing cost in errors. Mixing cost is thought to reflect top-down management of competing task sets, thus resembling the bilingual situation where decisions of which language to use has to be made in each conversation. These findings provide additional support to the idea that some executive functions in bilinguals are affected by a lifelong experience in language switching and, perhaps even more importantly, suggest a complementary approach to the study of this issue.
-
A smart microelectromechanical sensor and switch triggered by gas
Bouchaala, Adam M.
2016-07-05
There is an increasing interest to realize smarter sensors and actuators that can deliver a multitude of sophisticated functionalities while being compact in size and of low cost. We report here combining both sensing and actuation on the same device based on a single microstructure. Specifically, we demonstrate a smart resonant gas (mass) sensor, which in addition to being capable of quantifying the amount of absorbed gas, can be autonomously triggered as an electrical switch upon exceeding a preset threshold of absorbed gas. Toward this, an electrostatically actuated polymer microbeam is fabricated and is then functionalized with a metal-organic framework, namely, HKUST-1. The microbeam is demonstrated to absorb vapors up to a certain threshold, after which is shown to collapse through the dynamic pull-in instability. Upon pull-in, the microstructure can be made to act as an electrical switch to achieve desirable actions, such as alarming.
-
A smart microelectromechanical sensor and switch triggered by gas
Bouchaala, Adam; Jaber, Nizar; Shekhah, Osama; Chernikova, Valeriya; Eddaoudi, Mohamed; Younis, Mohammad I.
2016-07-01
There is an increasing interest to realize smarter sensors and actuators that can deliver a multitude of sophisticated functionalities while being compact in size and of low cost. We report here combining both sensing and actuation on the same device based on a single microstructure. Specifically, we demonstrate a smart resonant gas (mass) sensor, which in addition to being capable of quantifying the amount of absorbed gas, can be autonomously triggered as an electrical switch upon exceeding a preset threshold of absorbed gas. Toward this, an electrostatically actuated polymer microbeam is fabricated and is then functionalized with a metal-organic framework, namely, HKUST-1. The microbeam is demonstrated to absorb vapors up to a certain threshold, after which is shown to collapse through the dynamic pull-in instability. Upon pull-in, the microstructure can be made to act as an electrical switch to achieve desirable actions, such as alarming.
-
Lofgren, Michael; Koutmos, Markos; Banerjee, Ruma
2013-10-25
MeaB is an accessory GTPase protein involved in the assembly, protection, and reactivation of 5'-deoxyadenosyl cobalamin-dependent methylmalonyl-CoA mutase (MCM). Mutations in the human ortholog of MeaB result in methylmalonic aciduria, an inborn error of metabolism. G-proteins typically utilize conserved switch I and II motifs for signaling to effector proteins via conformational changes elicited by nucleotide binding and hydrolysis. Our recent discovery that MeaB utilizes an unusual switch III region for bidirectional signaling with MCM raised questions about the roles of the switch I and II motifs in MeaB. In this study, we addressed the functions of conserved switch II residues by performing alanine-scanning mutagenesis. Our results demonstrate that the GTPase activity of MeaB is autoinhibited by switch II and that this loop is important for coupling nucleotide-sensitive conformational changes in switch III to elicit the multiple chaperone functions of MeaB. Furthermore, we report the structure of MeaB·GDP crystallized in the presence of AlFx(-) to form the putative transition state analog, GDP·AlF4(-). The resulting crystal structure and its comparison with related G-proteins support the conclusion that the catalytic site of MeaB is incomplete in the absence of the GTPase-activating protein MCM and therefore unable to stabilize the transition state analog. Favoring an inactive conformation in the absence of the client MCM protein might represent a strategy for suppressing the intrinsic GTPase activity of MeaB in which the switch II loop plays an important role.
-
Electromechanical magnetization switching
Energy Technology Data Exchange (ETDEWEB)
Chudnovsky, Eugene M. [Department of Physics and Astronomy, Lehman College and Graduate School, The City University of New York, 250 Bedford Park Boulevard West, Bronx, New York 10468-1589 (United States); Jaafar, Reem [Department of Mathematics, Engineering and Computer Science, LaGuardia Community College, The City University of New York, 31-10 Thomson Avenue, Long Island City, New York 11101 (United States)
2015-03-14
We show that the magnetization of a torsional oscillator that, in addition to the magnetic moment also possesses an electrical polarization, can be switched by the electric field that ignites mechanical oscillations at the frequency comparable to the frequency of the ferromagnetic resonance. The 180° switching arises from the spin-rotation coupling and is not prohibited by the different symmetry of the magnetic moment and the electric field as in the case of a stationary magnet. Analytical equations describing the system have been derived and investigated numerically. Phase diagrams showing the range of parameters required for the switching have been obtained.
-
Electromechanical magnetization switching
International Nuclear Information System (INIS)
Chudnovsky, Eugene M.; Jaafar, Reem
2015-01-01
We show that the magnetization of a torsional oscillator that, in addition to the magnetic moment also possesses an electrical polarization, can be switched by the electric field that ignites mechanical oscillations at the frequency comparable to the frequency of the ferromagnetic resonance. The 180° switching arises from the spin-rotation coupling and is not prohibited by the different symmetry of the magnetic moment and the electric field as in the case of a stationary magnet. Analytical equations describing the system have been derived and investigated numerically. Phase diagrams showing the range of parameters required for the switching have been obtained
-
Reynolds, Harry
2009-01-01
JUNOS Enterprise Switching is the only detailed technical book on Juniper Networks' new Ethernet-switching EX product platform. With this book, you'll learn all about the hardware and ASIC design prowess of the EX platform, as well as the JUNOS Software that powers it. Not only is this extremely practical book a useful, hands-on manual to the EX platform, it also makes an excellent study guide for certification exams in the JNTCP enterprise tracks. The authors have based JUNOS Enterprise Switching on their own Juniper training practices and programs, as well as the configuration, maintenanc
-
Switching statins in Norway after new reimbursement policy: a nationwide prescription study.
Sakshaug, Solveig; Furu, Kari; Karlstad, Øystein; Rønning, Marit; Skurtveit, Svetlana
2007-10-01
To assess the changes in prescribing of statins in Norway after implementation of the new reimbursement regulations for statins in June 2005. Data were retrieved from the Norwegian Prescription Database covering the total population in Norway (4.6 million). Outcome measures were the proportion of atorvastatin users switching to simvastatin and changes in the proportion of new statin users receiving simvastatin. Based on retail costs for all statin prescriptions dispensed in Norway, expenditure was measured in Norwegian currency. One-year prevalences of statin use increased from 6.3 to 6.8% for women and from 7.5 to 8.1% for men from the year before to the year after the new statin regulations. Of atorvastatin users (N = 131,222), 39% switched to simvastatin during the 13-month period after the implementation. The proportion of switching was higher in women (41%) than in men (36%). In May 2005, 48% of the new statin users received simvastatin. The proportion of new users receiving simvastatin increased rapidly after implementation of the new regulations to 68% in June 2005 and reached 92% in June 2006. Expenditure was reduced from 120 million to 95 million Euro when comparing the year before with the year after the new statin regulations. The new reimbursement policy for statins has had a great impact on physicians' prescribing of statins in Norway. Physicians in Norway acknowledge the importance of contributing to cost containment.
-
Maintenance optimization and prognostics of residual life - A state of the art report
Energy Technology Data Exchange (ETDEWEB)
Nystad, Bent
2006-01-15
In many industries a huge part of the daily operational costs are related to maintenance. One key function in cutting costs is in optimization of the maintenance efforts. A major task is to change the work culture and work processes from being repair oriented, with focus on repairing breakdowns, to being proactive and maintain critical parts/systems before failures occur. Estimation of residual life distributions is of great need to obtain an optimum preventive maintenance strategy. In this report two approaches for estimation of residual life are discussed. The first model assumes that the residual life follows a Weibull distribution where the parameters are dependent on expert judgement, inspection data, repair data, and technical health trends. The second model is based on a continuous time Markov chain. In maintenance optimization a quantitative approach like the mean residual life estimation is needed in addition to a qualitative approach like the Reliability Centred Maintenance (RCM) methodology to give support for e.g. optimization of the maintenance overhaul intervals.The use of residual life knowledge in opportunistic maintenance is also discussed.(auth)
-
A Q-Switched Erbium-Doped Fiber Laser with a Carbon Nanotube Based Saturable Absorber
International Nuclear Information System (INIS)
Harun, S. W.; Ismail, M. A.; Ahmad, F.; Ismail, M. F.; Nor, R. M.; Zulkepely, N. R.; Ahmad, H.
2012-01-01
We demonstrate a simple, compact and low cost Q-switched erbium-doped fiber laser (EDFL) using single-wall carbon nanotubes (CNTs) as a saturable absorber for possible applications in metrology, sensing, and medical diagnostics. The EDFL operates at around 1560 nm with repetition rates of 16.1 kHz and 6.4 kHz with saturable absorbers SA1 and SA2 at a pump power of 120 mW. The absorbers are constructed by optically driven deposition and normal deposition techniques. It is observed that the optical deposition method produces a Q-switched EDFL with a lower threshold of 70 mW and better Q-switching performance compared to that of the normal deposition method. The EDFL also has pulse energy of 90.3 nJ and pulse width of 11.6 μs at 120 mW pump power
-
International Nuclear Information System (INIS)
Joung, JinWook; Chung, Lan; Smyth, Andrew W
2010-01-01
The active interaction control (AIC) system consisting of a primary structure, an auxiliary structure and an interaction element was proposed to protect the primary structure against earthquakes and winds. The objective of the AIC system in reducing the responses of the primary structure is fulfilled by activating or deactivating the switching between the engagement and the disengagement of the primary and auxiliary structures through the interaction element. The status of the interaction element is controlled by switching control algorithms. The previously developed switching control algorithms require an excessive amount of switching, which is inefficient. In this paper, the excessive amount of switching is restricted by imposing an appropriately designed switching boundary region, where switching is prohibited, on pre-designed engagement–disengagement conditions. Two different approaches are used in designing the newly proposed AID-off and AID-off 2 algorithms. The AID-off 2 algorithm is designed to affect deactivated switching regions explicitly, unlike the AID-off algorithm, which follows the same procedure of designing the engagement–disengagement conditions of the previously developed algorithms, by using the current status of the AIC system. Both algorithms are shown to be effective in reducing the amount of switching times triggered from the previously developed AID algorithm under an appropriately selected control sampling period for different earthquakes, but the AID-off 2 algorithm outperforms the AID-off algorithm in reducing the number of switching times
-
Directory of Open Access Journals (Sweden)
Pedro P. Rocha
2016-06-01
Full Text Available During class switch recombination (CSR, B cells replace the Igh Cμ or δ exons with another downstream constant region exon (CH, altering the antibody isotype. CSR occurs through the introduction of AID-mediated double-strand breaks (DSBs in switch regions and subsequent ligation of broken ends. Here, we developed an assay to investigate the dynamics of DSB formation in individual cells. We demonstrate that the upstream switch region Sμ is first targeted during recombination and that the mechanism underlying this control relies on 53BP1. Surprisingly, regulation of break order occurs through residual binding of 53BP1 to chromatin before the introduction of damage and independent of its established role in DNA repair. Using chromosome conformation capture, we show that 53BP1 mediates changes in chromatin architecture that affect break order. Finally, our results explain how changes in Igh architecture in the absence of 53BP1 could promote inversional rearrangements that compromise CSR.
-
COST MEASUREMENT AND COST MANAGEMENT IN TARGET COSTING
Directory of Open Access Journals (Sweden)
Moisello Anna Maria
2012-07-01
Full Text Available Firms are coping with a competitive scenario characterized by quick changes produced by internationalization, concentration, restructuring, technological innovation processes and financial market crisis. On the one hand market enlargement have increased the number and the segmentation of customers and have raised the number of competitors, on the other hand technological innovation has reduced product life cycle. So firms have to adjust their management models to this scenario, pursuing customer satisfaction and respecting cost constraints. In a context where price is a variable fixed by the market, firms have to switch from the cost measurement logic to the cost management one, adopting target costing methodology. The target costing process is a price driven, customer oriented profit planning and cost management system. It works, in a cross functional way, from the design stage throughout all the product life cycle and it involves the entire value chain. The process implementation needs a costing methodology consistent with the cost management logic. The aim of the paper is to focus on Activity Based Costing (ABC application to target costing process. So: -it analyzes target costing logic and phases, basing on a literary review, in order to highlight the costing needs related to this process; -it shows, through a numerical example, how to structure a flexible ABC model – characterized by the separation between variable, fixed in the short and fixed costs - that effectively supports target costing process in the cost measurement phase (drifting cost determination and in the target cost alignment; -it points out the effectiveness of the Activity Based Costing as a model of cost measurement applicable to the supplier choice and as a support for supply cost management which have an important role in target costing process. The activity based information allows a firm to optimize the supplier choice by following the method of minimizing the
-
van der Eerden, Menno M.; de Graaff, Casper S.; Vlaspolder, Fer; Bronsveld, Willem; Jansen, Henk M.; Boersma, Wim G.
2004-01-01
Background: in patients with community-acquired pneumonia (CAP), switching from IV to PO antibiotics offers advantages over IV therapy alone, including improved cost-effectiveness through reductions in the length of hospital stay and treatment costs. Objective: The aim of this study was to determine
-
De Cian, E.; Hof, A. F.; Marangoni, G.; Tavoni, M.; van Vuuren, D. P.
2016-07-01
Equity considerations play an important role in international climate negotiations. While policy analysis has often focused on equity as it relates to mitigation costs, there are large regional differences in adaptation costs and the level of residual damage. This paper illustrates the relevance of including adaptation and residual damage in equity considerations by determining how the allocation of emission allowances would change to counteract regional differences in total climate costs, defined as the costs of mitigation, adaptation, and residual damage. We compare emission levels resulting from a global carbon tax with two allocations of emission allowances under a global cap-and-trade system: one equating mitigation costs and one equating total climate costs as share of GDP. To account for uncertainties in both mitigation and adaptation, we use a model-comparison approach employing two alternative modeling frameworks with different damage, adaptation cost, and mitigation cost estimates, and look at two different climate goals. Despite the identified model uncertainties, we derive unambiguous results on the change in emission allowance allocation that could lessen the unequal distribution of adaptation costs and residual damages through the financial transfers associated with emission trading.
-
Heightened Conflict in Cue-Target Translation Increases Backward Inhibition in Set Switching
Grange, James A.; Houghton, George
2010-01-01
Backward inhibition (BI) is a performance cost that occurs when an individual returns to a task after 1 (vs. more than 1) intervening trial, and it may reflect the inhibition of task-set components during switching. In 3 experiments, we support the theory that inhibition can target cue-based preparatory stages of a task. Participants performed a…
-
Valorization of Furfural Residue by Hydrothermal Carbonization
DEFF Research Database (Denmark)
Yue, Fen; Zhang, Jia; Pedersen, Christian Marcus
2017-01-01
Furfural residue (FR) is a low-cost by-product generated in the furfural production from corncobs, which is mainly composed of cellulose and lignin. In this report, hydrothermal carbonization (HTC) of deashed FR was conducted at various reaction temperatures (200, 220 and 240 °C) and reaction times...
-
Know-How on design of switching regulator
International Nuclear Information System (INIS)
1985-08-01
This book introduces switching regulator from base to application, which deals with fundamentals of switching regulator such as the reason of boom about switching regulator, understanding simple circuit without electric transformer and decision of circuit type with input voltage and output voltage, configuration and characteristic of switching regulator, a concrete design of switching regulator, pulse width control circuit and protection circuit, concrete circuit examples of switching power and the point of switching regulator.
-
MENGAPA PERUSAHAAN MELAKUKAN AUDITOR SWITCH?
Directory of Open Access Journals (Sweden)
Kadek Sumadi
2011-01-01
Full Text Available The existence of a large number of accounting firms allowsprovides companies choices whether to stay with current firm or switchto another accounting firm. Decision of Minister of FinanceNo.423/KMK.06/2002 states that a company must switch auditor afterfive years of consecutive assignment. This is mandatory. The questionrises when a company voluntarily switches its auditor. Why does thishappen?One of the reasons is that management does not satisfy withauditor opinion, except for unqualified opinion. New management teamwould directly or indirectly encourage auditor switch to align accountingand reporting policies. Moreover an expanding company expects positivereaction when it does auditor switch. Profitability is also one reason fora company to switch auditor, for example, when a company earns moreprofit it tends to hire more credible auditor. On the other hand, when thecompany faces a financial distress, it probably would switch auditor aswell.
-
Shendale, Stephanie; Farrell, Margaret; Hampton, Lee M; Harris, Jennifer B; Kachra, Tasleem; Kurji, Feyrouz; Patel, Manish; Ramirez Gonzalez, Alejandro; Zipursky, Simona
2017-07-01
The global switch from trivalent oral polio vaccine (tOPV) to bivalent oral polio vaccine (bOPV) ("the switch") presented an unprecedented challenge to countries. In order to mitigate the risks associated with country-level delays in implementing the switch, the Global Polio Eradication Initiative provided catalytic financial support to specific countries for operational costs unique to the switch. Between November 2015 and February 2016, a total of approximately US$19.4 million in financial support was provided to 67 countries. On average, country budgets allocated 20% to human resources, 23% to trainings and meetings, 8% to communications and advocacy, 9% to logistics, 15% to monitoring, and 5% to waste management. All 67 funded countries successfully switched from tOPV to bOPV during April-May 2016. This funding provided target countries with the necessary catalytic support to facilitate the execution of the switch on an accelerated timeline, and the mechanism offers a model for similar support to future global health efforts, such as the eventual global withdrawal of bOPV. © The Author 2017. Published by Oxford University Press for the Infectious Diseases Society of America.
-
Comparison of Ion Beam opening switch and plasma opening switch performance
International Nuclear Information System (INIS)
Greenly, J.R.; Rondeau, G.D.; Sheldon, H.T.; Dreike, P.L.
1986-01-01
The Ion Beam opening switch (IBOS) experiment has shown that an intense charge-neutralized ion beam can carry current across a vacuum magnetically-insulated transmission line and then transfer that current to a downstream load quickly. In the IBOS experiment, a 10 cm wide parallel plate transmission line was fed up to 100 kA peak current by a 4Ω, 100 ns pulser. An ion beam of up to 100 A/cm/sup 2/, 100-300 keV protons or carbon was injected through the anode of the line in a 10 cm x 10 cm region. The line terminated in either a 15 nH short circuit or an electron diode with variable gap. The ion beam switch was able to carry up to 70 kA of line current before load current began to flow. This model is also quantitatively consistent with the observation that switch conduction current is not linear with either injected ion beam current or switch area
-
Analytical Performance Evaluation of Different Switch Solutions
Directory of Open Access Journals (Sweden)
Francisco Sans
2013-01-01
Full Text Available The virtualization of the network access layer has opened new doors in how we perceive networks. With this virtualization of the network, it is possible to transform a regular PC with several network interface cards into a switch. PC-based switches are becoming an alternative to off-the-shelf switches, since they are cheaper. For this reason, it is important to evaluate the performance of PC-based switches. In this paper, we present a performance evaluation of two PC-based switches, using Open vSwitch and LiSA, and compare their performance with an off-the-shelf Cisco switch. The RTT, throughput, and fairness for UDP are measured for both Ethernet and Fast Ethernet technologies. From this research, we can conclude that the Cisco switch presents the best performance, and both PC-based switches have similar performance. Between Open vSwitch and LiSA, Open vSwitch represents a better choice since it has more features and is currently actively developed.
-
Kroeger, A; Ayala, C; Medina Lara, A
2002-06-01
A study of unit costs and cost components of two malaria-control strategies (house spraying and bednet impregnation with residual insecticides) was undertaken in 11 malaria-endemic states (departamentos) of Colombia, using data provided by control staff on self-administered questionnaires. The accuracy of the data was verified by personal visits, telephone conversations and complementary information from 10 other states. Allthe financial-cost components of the malaria-control operations carried out in the previous 6 months and the results of the control operations themselves (including the numbers of houses sprayed and numbers of bednets impregnated/day) were recorded. The information was stratified according to whether the target communities were 'near' or 'far away' from an operational base, the far-away communities being those that needed overnight stays by the control staff. The main variables analysed were unit costs/house treated, and annual cost/person protected. The results show that house spraying was generally more expensive for the health services than bednet impregnation. This is particularly the case in 'nearby' communities, where most of those at-risk live. In such communities, spraying one house was 7.2 times more expensive than impregnating one bednet. Even if only those sleeping under an impregnated net were assumed to be protected, the unit costs/person protected in a 'nearby' community were twice as high for house spraying than for bednet impregnation. In 'nearby' communities, where technicians could return to the operational base each evening, insecticides made up 80% of the total spraying costs and 42% of the costs of bednet impregnation. In 'far-away' communities, however, salaries and 'per diems' were the most important cost components, representing, respectively, 23% and 22% of the costs of spraying, and 34% plus 27% of the costs of impregnation. Insecticide wastage and non-use of discounts on insecticide prices (available through the
-
Principles of broadband switching and networking
Liew, Soung C
2010-01-01
An authoritative introduction to the roles of switching and transmission in broadband integrated services networks Principles of Broadband Switching and Networking explains the design and analysis of switch architectures suitable for broadband integrated services networks, emphasizing packet-switched interconnection networks with distributed routing algorithms. The text examines the mathematical properties of these networks, rather than specific implementation technologies. Although the pedagogical explanations in this book are in the context of switches, many of the fundamenta
-
Error rate degradation due to switch crosstalk in large modular switched optical networks
DEFF Research Database (Denmark)
Saxtoft, Christian; Chidgey, P.
1993-01-01
A theoretical model of an optical network incorporating wavelength selective elements, amplifiers, couplers and switches is presented. The model is used to evaluate a large modular switch optical network that provides the capability of adapting easily to changes in network traffic requirements. T....... The network dimensions are shown to be limited by the optical crosstalk in the switch matrices and by the polarization dependent loss in the optical components...
-
Pemodelan Markov Switching Autoregressive
Ariyani, Fiqria Devi; Warsito, Budi; Yasin, Hasbi
2014-01-01
Transition from depreciation to appreciation of exchange rate is one of regime switching that ignored by classic time series model, such as ARIMA, ARCH, or GARCH. Therefore, economic variables are modeled by Markov Switching Autoregressive (MSAR) which consider the regime switching. MLE is not applicable to parameters estimation because regime is an unobservable variable. So that filtering and smoothing process are applied to see the regime probabilities of observation. Using this model, tran...
-
International Nuclear Information System (INIS)
Martin, T.H.; Seamen, J.F.; Jobe, D.O.
1993-01-01
The authors experiments show energy losses between 2 and 10 times that of the resistive time predictions. The experiments used hydrogen, helium, air, nitrogen, SF 6 polyethylene, and water for the switching dielectric. Previously underestimated switch losses have caused over predicting the accelerator outputs. Accurate estimation of these losses is now necessary for new high-efficiency pulsed power devices where the switching losses constitute the major portion of the total energy loss. They found that the switch energy losses scale as (V peak I peak ) 1.1846 . When using this scaling, the energy losses in any of the tested dielectrics are almost the same. This relationship is valid for several orders of magnitude and suggested a theoretical basis for these results. Currents up to .65 MA, with voltages to 3 MV were applied to various gaps during these experiments. The authors data and the developed theory indicates that the switch power loss continues for a much longer time than the resistive time, with peak power loss generally occurring at peak current in a ranging discharge instead of the early current time. All of the experiments were circuit code modeled after developing a new switch loss version based on the theory. The circuit code predicts switch energy loss and peak currents as a function of time. During analysis of the data they noticed slight constant offsets between the theory and data that depended on the dielectric. They modified the plasma conductivity for each tested dielectric to lessen this offset
-
Li, Xiaoang; Pei, Zhehao; Wu, Zhicheng; Zhang, Yuzhao; Liu, Xuandong; Li, Yongdong; Zhang, Qiaogen
2018-03-01
Microparticle initiated pre-firing of high pressure gas switches for fast linear transformer drivers (FLTDs) is experimentally and theoretically verified. First, a dual-electrode gas switch equipped with poly-methyl methacrylate baffles is used to capture and collect the microparticles. By analyzing the electrode surfaces and the collecting baffles by a laser scanning confocal microscope, microparticles ranging in size from tens of micrometers to over 100 μm are observed under the typical working conditions of FLTDs. The charging and movement of free microparticles in switch cavity are studied, and the strong DC electric field drives the microparticles to bounce off the electrode. Three different modes of free microparticle motion appear to be responsible for switch pre-firing. (i) Microparticles adhere to the electrode surface and act as a fixed protrusion which distorts the local electric field and initiates the breakdown in the gap. (ii) One particle escapes toward the opposite electrode and causes a near-electrode microdischarge, inducing the breakdown of the residual gap. (iii) Multiple moving microparticles are occasionally in cascade, leading to pre-firing. Finally, as experimental verification, repetitive discharges at ±90 kV are conducted in a three-electrode field-distortion gas switch, with two 8 mm gaps and pressurized with nitrogen. An ultrasonic probe is employed to monitor the bounce signals. In pre-firing incidents, the bounce is detected shortly before the collapse of the voltage waveform, which demonstrates that free microparticles contribute significantly to the mechanism that induces pre-firing in FLTD gas switches.
-
Li, Xiaoang; Pei, Zhehao; Wu, Zhicheng; Zhang, Yuzhao; Liu, Xuandong; Li, Yongdong; Zhang, Qiaogen
2018-03-01
Microparticle initiated pre-firing of high pressure gas switches for fast linear transformer drivers (FLTDs) is experimentally and theoretically verified. First, a dual-electrode gas switch equipped with poly-methyl methacrylate baffles is used to capture and collect the microparticles. By analyzing the electrode surfaces and the collecting baffles by a laser scanning confocal microscope, microparticles ranging in size from tens of micrometers to over 100 μm are observed under the typical working conditions of FLTDs. The charging and movement of free microparticles in switch cavity are studied, and the strong DC electric field drives the microparticles to bounce off the electrode. Three different modes of free microparticle motion appear to be responsible for switch pre-firing. (i) Microparticles adhere to the electrode surface and act as a fixed protrusion which distorts the local electric field and initiates the breakdown in the gap. (ii) One particle escapes toward the opposite electrode and causes a near-electrode microdischarge, inducing the breakdown of the residual gap. (iii) Multiple moving microparticles are occasionally in cascade, leading to pre-firing. Finally, as experimental verification, repetitive discharges at ±90 kV are conducted in a three-electrode field-distortion gas switch, with two 8 mm gaps and pressurized with nitrogen. An ultrasonic probe is employed to monitor the bounce signals. In pre-firing incidents, the bounce is detected shortly before the collapse of the voltage waveform, which demonstrates that free microparticles contribute significantly to the mechanism that induces pre-firing in FLTD gas switches.
-
Residual nilpotence and residual solubility of groups
International Nuclear Information System (INIS)
Mikhailov, R V
2005-01-01
The properties of the residual nilpotence and the residual solubility of groups are studied. The main objects under investigation are the class of residually nilpotent groups such that each central extension of these groups is also residually nilpotent and the class of residually soluble groups such that each Abelian extension of these groups is residually soluble. Various examples of groups not belonging to these classes are constructed by homological methods and methods of the theory of modules over group rings. Several applications of the theory under consideration are presented and problems concerning the residual nilpotence of one-relator groups are considered.
-
Software Switching for Data Acquisition
CERN. Geneva; Malone, David
2016-01-01
In this talk we discuss the feasibility of replacing telecom-class routers with a topology of commodity servers acting as software switches in data acquisition. We extend the popular software switch, Open vSwitch, with a dedicated, throughput-oriented buffering mechanism. We compare the performance under heavy many-to-one congestion to typical Ethernet switches and evaluate the scalability when building larger topologies, exploiting the integration with software-defined networking technologies. Please note that David Malone will speak on behalf of Grzegorz Jereczek.
-
Low-Voltage Switched-Capacitor Circuits
DEFF Research Database (Denmark)
Bidari, E.; Keskin, M.; Maloberti, F.
1999-01-01
Switched-capacitor stages are described which can function with very low (typically 1 V) supply voltages, without using voltage boosting or switched op-amps. Simulations indicate that high performance may be achieved using these circuits in filter or data converter applications.......Switched-capacitor stages are described which can function with very low (typically 1 V) supply voltages, without using voltage boosting or switched op-amps. Simulations indicate that high performance may be achieved using these circuits in filter or data converter applications....
-
Moradzadeh, Linda; Blumenthal, Galit; Wiseheart, Melody
2015-07-01
This study investigated whether musical training and bilingualism are associated with enhancements in specific components of executive function, namely, task switching and dual-task performance. Participants (n = 153) belonging to one of four groups (monolingual musician, bilingual musician, bilingual non-musician, or monolingual non-musician) were matched on age and socioeconomic status and administered task switching and dual-task paradigms. Results demonstrated reduced global and local switch costs in musicians compared with non-musicians, suggesting that musical training can contribute to increased efficiency in the ability to shift flexibly between mental sets. On dual-task performance, musicians also outperformed non-musicians. There was neither a cognitive advantage for bilinguals relative to monolinguals, nor an interaction between music and language to suggest additive effects of both types of experience. These findings demonstrate that long-term musical training is associated with improvements in task switching and dual-task performance. Copyright © 2014 Cognitive Science Society, Inc.
-
Energy Technology Data Exchange (ETDEWEB)
Kato, Koichi; Matsunaga, Chigusa; Odaka, Asano; Yamato, Sumie; Takaha, Wakana; Shimada, Ichio; Arata, Yoji (Univ. of Tokyo (Japan))
1991-07-02
A {sup 13}C NMR study is reported of switch variant anti-dansyl antibodies, which possess the identical V{sub H}, V{sub L}, and C{sub L} domains in conjunction with highly homologous but not identical heavy-chain constant regions. Each of the antibodies has been selectively labeled with {sup 13}C at the carbonyl carbon of Trp, Tyr, His, or Cys residue by growing hybridoma cells in serum-free medium. Spectral assignments have been made by folowing the procedure described previously for the switch variant antibodies labeled with (1-{sup 13}C)Met. On the basis of the spectral data collected for the antibodies and their proteolytic fragments, the authors discuss how {sup 13}C NMR spectroscopy can be used for the structural analyses of antigen binding and also of domain-domain interactions in the antibody molecule.
-
Bootstrapped Low-Voltage Analog Switches
DEFF Research Database (Denmark)
Steensgaard-Madsen, Jesper
1999-01-01
Novel low-voltage constant-impedance analog switch circuits are proposed. The switch element is a single MOSFET, and constant-impedance operation is obtained using simple circuits to adjust the gate and bulk voltages relative to the switched signal. Low-voltage (1-volt) operation is made feasible...
-
Costs related to radioactive residues from nuclear power
International Nuclear Information System (INIS)
1988-06-01
The nuclear power enterprises are responsible for proper actions for safe handling and final storage of spent nuclear fuel and radioactive waste from Swedish nuclear power facilities. The most important actions are to plan, build and operate necessary plants and systems. The nuclear power enterprises have designated Swedish Nuclear Fuel and Waste Management Co., (SKB), to perform these tasks. In this report calculations concerning costs to carry out these tasks are presented. The calculations are based upon a plan prepared by SKB. The plan is described in the report. As final storage of the long lived and highly radioactive waste is planned to take place in the 21st century continuing research and development may indicate new methods which may affect system design as well as costs in a simplifying way. Plants and systems already operational are: Transport systems for radioactive waste products; A central temporary storage for spent nuclear fuel, 'CLAB'; A final storage for radioactive waste from operating nuclear facilities, 'SFR 1'. (L.F.)
-
Utilization of protein-rich residues in biotechnological processes.
Pleissner, Daniel; Venus, Joachim
2016-03-01
A drawback of biotechnological processes, where microorganisms convert biomass constituents, such as starch, cellulose, hemicelluloses, lipids, and proteins, into wanted products, is the economic feasibility. Particularly the cost of nitrogen sources in biotechnological processes can make up a large fraction of total process expenses. To further develop the bioeconomy, it is of considerable interest to substitute cost-intensive by inexpensive nitrogen sources. The aim of this mini-review was to provide a comprehensive insight of utilization methods of protein-rich residues, such as fish waste, green biomass, hairs, and food waste. The methods described include (i) production of enzymes, (ii) recovery of bioactive compounds, and/or (iii) usage as nitrogen source for microorganisms in biotechnological processes. In this aspect, the utilization of protein-rich residues, which are conventionally considered as waste, allows the development of value-adding processes for the production of bioactive compounds, biomolecules, chemicals, and materials.
-
A compact plasmonic MOS-based 2×2 electro-optic switch
Directory of Open Access Journals (Sweden)
Ye Chenran
2015-01-01
Full Text Available We report on a three-waveguide electro-optic switch for compact photonic integrated circuits and data routing applications. The device features a plasmonic metal-oxide-semiconductor (MOS mode for enhanced light-matter-interactions. The switching mechanism originates from a capacitor-like design where the refractive index of the active medium, indium-tin-oxide, is altered via shifting the plasma frequency due to carrier accumulation inside the waveguide-based MOS structure. This light manipulation mechanism controls the transmission direction of transverse magnetic polarized light into either a CROSS or BAR waveguide port. The extinction ratio of 18 (7 dB for the CROSS (BAR state, respectively, is achieved via a gating voltage bias. The ultrafast broadband fJ/bit device allows for seamless integration with silicon-on-insulator platforms for low-cost manufacturing.
-
Energy Technology Data Exchange (ETDEWEB)
Iman, R.L.; Anderson, D.J. [Sandia National Labs., Albuquerque, NM (United States); Burress, R.V. [SEHO (United States)] [and others
1995-06-01
The LRSTF combined the efforts of industry, military, and government to evaluate low-residue soldering processes for military and commercial applications. These processes were selected for evaluation because they provide a means for the military to support the presidential mandate while producing reliable hardware at a lower cost. This report presents the complete details and results of a testing program conducted by the LRSTF to evaluate low-residue soldering for printed wiring assemblies. A previous informal document provided details of the test plan used in this evaluation. Many of the details of that test plan are contained in this report. The test data are too massive to include in this report, however, these data are available on disk as Excel spreadsheets upon request. The main purpose of low-residue soldering is to eliminate waste streams during the manufacturing process.
-
Characteristics of magnetic switch used as main switch of solid-state accelerator
International Nuclear Information System (INIS)
Li Song; Qian Baoliang; Yang Hanwu; Meng Zhipeng; Yang Shi
2012-01-01
In order to improve the performance of solid-state accelerator, the characteristics of magnetic switch used as the main switch of the accelerator have been investigated. The volume of magnetic core, the loss, and saturated inductance of the magnetic switch have been derived. The results show that the spacing factor of the magnetic switch reaches the peak when the height of the magnetic materials is 0.05 m for selected magnetic cores. The saturated inductance of the windings changes slowly when the average magnetic path length of the core is greater than 1 m. The physical process of saturation in the cores was analyzed by using saturation-wave theory. The rise-time factor of the output pulse was derived. The thickness, resistivity and magnetic path length difference of the magnetic core are shown to be key parameters affecting the rise-time factor. (authors)
-
A new Zero-Voltage-Transition PWM switching cell
Energy Technology Data Exchange (ETDEWEB)
Grigore, V. [Electronics and Telecommunications Faculty `Politebuica` University Bucharest (Romania); Kyyrae, J. [Helsinki University of Technology, Otaniemi (Finland): Institute of Intelligent Power Electronics
1997-12-31
In this paper a new Zero-Voltage-Transition (ZVT) PWM switching cell is presented. The proposed switching cell is composed of the normal hard-switched PWM cell (consisting of one active switch and one passive switch), plus an auxiliary circuit (consisting of one active switch and some reactive components). The auxiliary circuit is inactive during the ON and OFF intervals of the switches in the normal PWM switch. However, the transitions between the two states are controlled by the auxiliary circuit. Prior to turn-on, the voltage across the active switch in the PWM cell is forced to zero, thus the turn-on losses of the active switch are practically eliminated. At turn-off the auxiliary circuit behaves like a non-dissipative passive snubber reducing the turn-off losses to a great extent. Zero-Voltage-Transition switching technique almost eliminates switching losses. The active switch operates under ZVT conditions, the passive switch (diode) has a controlled reverse recovery, and the switch in the auxiliary circuit operates under Zero-Current-Switching (ZCS) conditions. (orig.) 6 refs.
-
Directory of Open Access Journals (Sweden)
Raffaele Cavalli
2007-09-01
Full Text Available A GIS-based approach is presented in order to define a decision support system tool for strategic planning of forest biomass supply chain for a heating/energy use. The presented GIS-based approach focus its analysis on forest management data, road network characteristics, terrain features and chipping and transporting cost. According to two different heating plants location, results on the availability of logging residues for energy use are presented in form of cost supply curves. For the investigated case study, supply curves evidence that, also at local level, different locations of heating plants can affect the cost-efficient use of logging residues in form of wood chips.
-
Recent developments in switching theory
Mukhopadhyay, Amar
2013-01-01
Electrical Science Series: Recent Developments in Switching Theory covers the progress in the study of the switching theory. The book discusses the simplified proof of Post's theorem on completeness of logic primitives; the role of feedback in combinational switching circuits; and the systematic procedure for the design of Lupanov decoding networks. The text also describes the classical results on counting theorems and their application to the classification of switching functions under different notions of equivalence, including linear and affine equivalences. The development of abstract har
-
Amorphous metal based nanoelectromechanical switch
Mayet, Abdulilah M.; Smith, Casey; Hussain, Muhammad Mustafa
2013-01-01
Nanoelectromechanical (NEM) switch is an interesting ultra-low power option which can operate in the harsh environment and can be a complementary element in complex digital circuitry. Although significant advancement is happening in this field, report on ultra-low voltage (pull-in) switch which offers high switching speed and area efficiency is yet to be made. One key challenge to achieve such characteristics is to fabricate nano-scale switches with amorphous metal so the shape and dimensional integrity are maintained to achieve the desired performance. Therefore, we report a tungsten alloy based amorphous metal with fabrication process development of laterally actuated dual gated NEM switches with 100 nm width and 200 nm air-gap to result in <5 volts of actuation voltage (Vpull-in). © 2013 IEEE.
-
Switched-capacitor isolated LED driver
Sanders, Seth R.; Kline, Mitchell
2016-03-22
A switched-capacitor voltage converter which is particularly well-suited for receiving a line voltage from which to drive current through a series of light emitting diodes (LEDs). Input voltage is rectified in a multi-level rectifier network having switched capacitors in an ascending-bank configuration for passing voltages in uniform steps between zero volts up to full received voltage V.sub.DC. A regulator section, operating on V.sub.DC, comprises switched-capacitor stages of H-bridge switching and flying capacitors. A current controlled oscillator drives the states of the switched-capacitor stages and changes its frequency to maintain a constant current to the load. Embodiments are described for isolating the load from the mains, utilizing an LC tank circuit or a multi-primary-winding transformer.
-
Amorphous metal based nanoelectromechanical switch
Mayet, Abdulilah M.
2013-04-01
Nanoelectromechanical (NEM) switch is an interesting ultra-low power option which can operate in the harsh environment and can be a complementary element in complex digital circuitry. Although significant advancement is happening in this field, report on ultra-low voltage (pull-in) switch which offers high switching speed and area efficiency is yet to be made. One key challenge to achieve such characteristics is to fabricate nano-scale switches with amorphous metal so the shape and dimensional integrity are maintained to achieve the desired performance. Therefore, we report a tungsten alloy based amorphous metal with fabrication process development of laterally actuated dual gated NEM switches with 100 nm width and 200 nm air-gap to result in <5 volts of actuation voltage (Vpull-in). © 2013 IEEE.
-
Rahman, Momotazur; Keohane, Laura; Trivedi, Amal N; Mor, Vincent
2015-10-01
Medicare Advantage payment regulations include risk-adjusted capitated reimbursement, which was implemented to discourage favorable risk selection and encourage the retention of members who incur high costs. However, the extent to which risk-adjusted capitation has succeeded is not clear, especially for members using high-cost services not previously considered in assessments of risk selection. We examined the rates at which participants who used three high-cost services switched between Medicare Advantage and traditional Medicare. We found that the switching rate from 2010 to 2011 away from Medicare Advantage and to traditional Medicare exceeded the switching rate in the opposite direction for participants who used long-term nursing home care (17 percent versus 3 percent), short-term nursing home care (9 percent versus 4 percent), and home health care (8 percent versus 3 percent). These results were magnified among people who were enrolled in both Medicare and Medicaid. Our findings raise questions about the role of Medicare Advantage plans in serving high-cost patients with complex care needs, who account for a disproportionately high amount of total health care spending. Project HOPE—The People-to-People Health Foundation, Inc.
-
Flux Concentration and Pole Shaping in a Single Phase Hybrid Switched Reluctance Motor Drive
DEFF Research Database (Denmark)
Jakobsen, Uffe; Lu, Kaiyuan
2010-01-01
The single phase hybrid switched reluctance motor (HSRM) may be a good candidate for low-cost drives used for pump applications. This paper presents a new design of the HSRM with improved starting torque achieved by stator pole shaping, and a better arrangement of the embedded stator permanent...
-
Faraj, Chafika; Yukich, Joshua; Adlaoui, El Bachir; Wahabi, Rachid; Mnzava, Abraham Peter; Kaddaf, Mustapha; El Idrissi, Abderrahmane Laamrani; Ameur, Btissam; Kleinschmidt, Immo
2016-01-01
Cutaneous leishmaniasis (CL) remains an important public health problem in Morocco. A cluster-randomized trial was conducted with the following three study arms: 1) long-lasting insecticide-treated nets (LLINs) plus standard of care environmental management (SoC-EM), 2) indoor residual spraying (IRS) with α-cypermethrin plus SoC-EM, and 3) SoC-EM alone. Incidence of new CL cases by passive and active case detection, sandfly abundance, and cost and cost-effectiveness was compared between study arms over 5 years. Incidence of CL and sandfly abundance were significantly lower in the IRS arm compared with SoC-EM (CL incidence rate ratio = 0.32, 95% confidence interval [CI] = 0.15–0.69, P = 0.005 and sandfly abundance ratio = 0.39, 95% CI = 0.18–0.85, P = 0.022). Reductions in the LLIN arm of the study were not significant, possibly due to poor compliance. IRS was effective and more cost-effective for the prevention of CL in Morocco. PMID:26811431
-
Switching between global and local levels: the level repetition effect and its hemispheric asymmetry
Kéïta, Luc; Bedoin, Nathalie; Burack, Jacob A.; Lepore, Franco
2014-01-01
The global level of hierarchical stimuli (Navon’s stimuli) is typically processed quicker and better than the local level; further differential hemispheric dominance is described for local (left hemisphere, LH) and global (right hemisphere, RH) processing. However, neuroimaging and behavioral data indicate that stimulus category (letter or object) could modulate the hemispheric asymmetry for the local level processing. Besides, when the targets are unpredictably displayed at the global or local level, the participant has to switch between levels, and the magnitude of the switch cost increases with the number of repeated-level trials preceding the switch. The hemispheric asymmetries associated with level switching is an unresolved issue. LH areas may be involved in carrying over the target level information in case of level repetition. These areas may also largely participate in the processing of level-changed trials. Here we hypothesized that RH areas underly the inhibitory mechanism performed on the irrelevant level, as one of the components of the level switching process. In an experiment using a within-subject design, hierarchical stimuli were briefly presented either to the right or to the left visual field. 32 adults were instructed to identify the target at the global or local level. We assessed a possible RH dominance for the non-target level inhibition by varying the attentional demands through the manipulation of level repetitions (two or gour repeated-level trials before the switch). The behavioral data confirmed a LH specialization only for the local level processing of letter-based stimuli, and detrimental effect of increased level repetitions before a switch. Further, data provides evidence for a RH advantage in inhibiting the non-target level. Taken together, the data supports the notion of the existence of multiple mechanisms underlying level-switch effects. PMID:24723903
-
A new Zero-Current-Transition PWM switching cell
Energy Technology Data Exchange (ETDEWEB)
Grigore, V. [Electronics and Telecommunications Faculty, `Politechnica` University Bucharest (Romania); Kyyrae, J. [Helsinki University of Technology, Otaniemi (Finland): Institute of Intelligent Power Electronics
1997-12-31
In this paper a new Zero-Current-Transition (ZCT) PWM switching cell is presented. The proposed switching cell is composed of the normal hard-switched PWM cell (consisting of one active switch and one passive switch), plus as auxiliary circuit. The auxiliary circuit is inactive during the ON ad OFF intervals of the switches in the normal PWM switch. The transitions between the two states are controlled by the auxiliary circuit. Prior to turn-off, the current through the active switch in the PWM cell is forced to zero, thus the turn-off losses of the active switch are practically eliminated. At turn-on the auxiliary circuit slows down the growing rate of the current through the main switch. Thus, turn-on losses are also very much reduced. The active switch operates under ZCT conditions, the passive switch (diode) has a controlled reverse recovery, while the switch in the auxiliary circuit operates under Zero-Current-Switching (ZCS) conditions. (orig.) 3 refs.
-
Call for Papers: Photonics in Switching
Wosinska, Lena; Glick, Madeleine
2006-04-01
Call for Papers: Photonics in Switching Guest Editors: Lena Wosinska, Royal Institute of Technology (KTH) / ICT Sweden Madeleine Glick, Intel Research, Cambridge, UK Technologies based on DWDM systems allow data transmission with bit rates of Tbit/s on a single fiber. To facilitate this enormous transmission volume, high-capacity and high-speed network nodes become inevitable in the optical network. Wideband switching, WDM switching, optical burst switching (OBS), and optical packet switching (OPS) are promising technologies for harnessing the bandwidth of WDM optical fiber networks in a highly flexible and efficient manner. As a number of key optical component technologies approach maturity, photonics in switching is becoming an increasingly attractive and practical solution for the next-generation of optical networks. The scope of this special issue is focused on the technology and architecture of optical switching nodes, including the architectural and algorithmic aspects of high-speed optical networks. Scope of Submission The scope of the papers includes, but is not limited to, the following topics: WDM node architectures Novel device technologies enabling photonics in switching, such as optical switch fabrics, optical memory, and wavelength conversion Routing protocols WDM switching and routing Quality of service Performance measurement and evaluation Next-generation optical networks: architecture, signaling, and control Traffic measurement and field trials Optical burst and packet switching OBS/OPS node architectures Burst/Packet scheduling and routing algorithms Contention resolution/avoidance strategies Services and applications for OBS/OPS (e.g., grid networks, storage-area networks, etc.) Burst assembly and ingress traffic shaping Hybrid OBS/TDM or OBS/wavelength routing Manuscript Submission To submit to this special issue, follow the normal procedure for submission to JON and select ``Photonics in Switching' in the features indicator of the online
-
Zhu, Lisha; Hu, Wei; Gao, Chao; Guo, Yongcai
2017-12-01
This paper reports the reversible transition processes between the bipolar and complementary resistive switching (CRS) characteristics on the binary metal-oxide resistive memory devices of Pt/HfO x /TiN and Pt/TaO x /TiN by applying the appropriate bias voltages. More interestingly, by controlling the amplitude of the negative bias, the parasitic resistive switching effect exhibiting repeatable switching behavior is uncovered from the CRS behavior. The electrical observation of the parasitic resistive switching effect can be explained by the controlled size of the conductive filament. This work confirms the transformation and interrelationship among the bipolar, parasitic, and CRS effects, and thus provides new insight into the understanding of the physical mechanism of the binary metal-oxide resistive switching memory devices.
-
Rajan, Krishna; Roppolo, Ignazio; Bejtka, Katarzyna; Chiappone, Annalisa; Bocchini, Sergio; Perrone, Denis; Pirri, Candido Fabrizio; Ricciardi, Carlo; Chiolerio, Alessandro
2018-06-01
The present work compares the influence of different polymer matrices on the performance of planar asymmetric Resistive Switching Devices (RSDs) based on silver nitrate and Ionic Liquid (IL). PolyVinyliDene Fluoride-HexaFluoroPropylene (PVDF-HFP), PolyEthylene Oxide (PEO), PolyMethyl MethAcrylate (PMMA) and a blend of PVDF-HFP and PEO were used as matrices and compared. RSDs represent perhaps the most promising electron device to back the More than Moore development, and our approach through functional polymers enables low temperature processing and gives compatibility towards flexible/stretchable/wearable equipment. The switching mechanism in all the four sample families is explained by means of a filamentary conduction. A huge difference in the cyclability and the On/Off ratio is experienced when changing the active polymers and explained based on the polymer crystallinity degree and general morphology of the prepared nanocomposite. It is worth noting that all the RSDs discussed here present good switching behaviour with reasonable endurance. The current study displays one of the most cost-effective and effortless ways to produce an RSD based on solution-processable materials.
-
Energy Technology Data Exchange (ETDEWEB)
Lee, H. [Kyungnam University (Korea, Republic of)
1996-10-27
A soft switching method with small switching loss was proposed for the purpose of increasing the efficiency of a DC-DC boost converter which converted a DC current generated by solar cells to a variable DC current. Existing current converters are supplemented by using a snubber circuit around the switch so as to protect the switch by a hard switching action. However, with an increase of the output current, snubber loss is increased, reducing the efficiency. In order to solve this problem, the partial resonant switch method was applied to the converter; with this method of partially forming a resonant circuit only at the time of turning on/off of the switch, the switching loss was reduced through the soft switching, thereby making the proposed converter operate with high efficiency. Moreover, the resonant element of the partial resonant circuit using a snubber condenser, the energy accumulated in the condenser was regenerated on the power supply side without loss of snubber. With the regenerated energy, the proposed converter was provided with a smaller ratio of switching to use than the conventional converter. 4 refs., 7 figs., 1 tab.
-
Evaluation and analysis of the residual radioactivity for the 15UD Pelletron accelerator facility
International Nuclear Information System (INIS)
Sonkawade, R. G.
2007-01-01
For the assessment of radiological impact of the accelerators, it will be better to have the documented information on activation of metal parts of the accelerator components. It is very much essential to get reliable data on these subjects. During acceleration of light ion, the residual radioactivity in the accelerator facility was found near the Analyzing Magnet, single slit, Beam Profile Monitors (BPM), Faraday Cups (FC), bellows, beginning of switching magnet bellows, at the target and the ladder. Study with HPGE detector gives an insight of the formation of the short or long lived radionuclides. The different targets used in the light ion experiment were also monitored and proper decommissioning and decontamination steps were followed. This paper presents the data of residual radioactivity in the 15UD Pelletron accelerator infrastructure. (author)
-
Non-fragile switched H∞ control for morphing aircraft with asynchronous switching
Directory of Open Access Journals (Sweden)
Haoyu CHENG
2017-06-01
Full Text Available This paper deals with the problem of non-fragile linear parameter-varying (LPV H∞ control for morphing aircraft with asynchronous switching. The switched LPV model of morphing aircraft is established by Jacobian linearization approach according to the nonlinear model. The data missing is taken into account in the link from sensors to controllers and the link from controllers to actuators, which satisfies Bernoulli distribution. The non-fragile switched LPV controllers are constructed with consideration of the uncertainties of controllers and asynchronous switching phenomenon. The parameter-dependent Lyapunov functional method and mode-dependent average dwell time (MDADT method are combined to guarantee the stability and prescribed performance of the system. The sufficient conditions on the solvability of the problem are derived in the form of linear matrix inequalities (LMI. In order to achieve higher efficiency of the designing process, an algorithm is applied to divide the whole set into subsets automatically. Simulation results are provided to verify the effectiveness and superiority of the method in the paper.
-
Streamer model for high voltage water switches
International Nuclear Information System (INIS)
Sazama, F.J.; Kenyon, V.L. III
1979-01-01
An electrical switch model for high voltage water switches has been developed which predicts streamer-switching effects that correlate well with water-switch data from Casino over the past four years and with switch data from recent Aurora/AMP experiments. Preclosure rounding and postclosure resistive damping of pulseforming line voltage waveforms are explained in terms of spatially-extensive, capacitive-coupling of the conducting streamers as they propagate across the gap and in terms of time-dependent streamer resistance and inductance. The arc resistance of the Casino water switch and of a gas switch under test on Casino was determined by computer fit to be 0.5 +- 0.1 ohms and 0.3 +- 0.06 ohms respectively, during the time of peak current in the power pulse. Energy lost in the water switch during the first pulse is 18% of that stored in the pulseforming line while similar energy lost in the gas switch is 11%. The model is described, computer transient analyses are compared with observed water and gas switch data and the results - switch resistance, inductance and energy loss during the primary power pulse - are presented
-
Agro-residues as Alternative for Xylanase Production by Filamentous Fungi
Directory of Open Access Journals (Sweden)
Adriana Knob
2014-07-01
Full Text Available Agro-industrial wastes are the most abundant renewable resource on earth and are available in large quantities. However, the disposal of these wastes presents an increasing environmental problem. Recently, there has been a great interest in the exploitation of these wastes as low-cost raw materials for the production of value-added compounds as microbial enzymes by submerged or solid-state fermentation systems. This review focuses on alternatives for xylanase production using agro-residues as substrates. In recent years, the interest in xylanase, which plays an important role in the breakdown of xylan, has markedly increased due to its wide variety of biotechnological applications. Among several agro-industrial residues that have been intensively investigated, many, such as wheat bran, wheat straw, and sugarcane bagasse, are suitable and result in high yields of xylanase, leading to low production costs. In addition, many relatively unexplored residues, such as oil palm wastes, sorghum straw, and coffee by-products, are some of the most promising substrates for xylanase production, requiring further assessment.
-
Switching dynamics of TaOx-based threshold switching devices
Goodwill, Jonathan M.; Gala, Darshil K.; Bain, James A.; Skowronski, Marek
2018-03-01
Bi-stable volatile switching devices are being used as access devices in solid-state memory arrays and as the active part of compact oscillators. Such structures exhibit two stable states of resistance and switch between them at a critical value of voltage or current. A typical resistance transient under a constant amplitude voltage pulse starts with a slow decrease followed by a rapid drop and leveling off at a low steady state value. This behavior prompted the interpretation of initial delay and fast transition as due to two different processes. Here, we show that the entire transient including incubation time, transition time, and the final resistance values in TaOx-based switching can be explained by one process, namely, Joule heating with the rapid transition due to the thermal runaway. The time, which is required for the device in the conducting state to relax back to the stable high resistance one, is also consistent with the proposed mechanism.
-
Energy Technology Data Exchange (ETDEWEB)
Kawamori, Eiichirou; Lin, Yu-Hsiang [Institute of Space and Plasma Sciences, National Cheng Kung University, Tainan 70101, Taiwan (China); Mase, Atsushi [Art, Science and Technology Center for Cooperative Research, Kyushu University, Kasuga 816-8580 (Japan); Nishida, Yasushi; Cheng, C. Z. [Institute of Space and Plasma Sciences, National Cheng Kung University, Tainan 70101, Taiwan (China); Plasma and Space Science Center, National Cheng Kung University, Tainan 70101, Taiwan (China)
2014-02-15
This study presents a simple and powerful technique for multichannel measurements of the density profile in laboratory plasmas by microwave interferometry. This technique uses electromechanical microwave switches to temporally switch the connection between multiple receiver antennas and one phase-detection circuit. Using this method, the phase information detected at different positions is rearranged into a time series that can be acquired from a minimum number of data acquisition channels (e.g., two channels in the case of quadrature detection). Our successfully developed multichannel microwave interferometer that uses the antenna switching method was applied to measure the radial electron density profiles in a magnetized plasma experiment. The advantage of the proposed method is its compactness and scalability to multidimensional measurement systems at low cost.
-
Pulsed Q-switched ruby laser annealing of Bi implanted Si crystals investigated by channeling
International Nuclear Information System (INIS)
Deutch, B.I.; Shih-Chang, T.; Shang-Hwai, L.; Zu-Yao, Z.; Jia-Zeng, H.; Ren-Zhi, D.; Te-Chang, C.; De-Xin, C.
1979-01-01
Channeling was used to investigate pulsed, Q switched ruby-laser annealed and thermally annealed Si single crystals implanted with 40-keV Bi ions to a dose of 10 15 atoms/cm 2 . After thermal annealing, residual damage decreased with increasing annealing temperature to a minimum value of 30% at 900 0 C. The Bi atoms in substitutional sites reached a maximum value (50%) after annealing at 750 0 C but decreased with increasing annealing temperature. Out diffusion of Bi atoms occurred at temperatures higher than 625 0 C. For comparison, the residual damage disappeared almost completely after pulsed-laser annealing (30 ns pulse width, Energy, E = 3J/cm 2 ). The concentration of Bi in Si exceeded its solid solubility by an order of magnitude; 95% of Bi atoms were annealed to substitutional sites. Laser pulses of different energies were used to investigate the efficiency of annealing. (author)
-
Fröber, Kerstin; Dreisbach, Gesine
2016-01-01
There is much evidence that the prospect of reward modulates cognitive control in terms of more stable behavior. Increases in expected reward magnitude, however, have been suggested to increase flexible behavior as evidenced by reduced switch costs. In a series of experiments, the authors provide evidence that this increased cognitive flexibility…
-
Development of the switching components for ZT-40
International Nuclear Information System (INIS)
Melton, J.G.; Dike, R.S.; Hanks, K.W.; Nunnally, W.C.
1977-01-01
Switching of the main capacitor banks for ZT-40 will be accomplished by spark gap switches. Initially, there will be 576 start switches and 288 crowbar switches. A development program is under way to develop three switches; (1) a versatile start switch, which can be used for both the I/sub z/ and the I/sub theta/ capacitor banks, with a wide operating voltage range, (2) a crowbar switch which is capable of crowbarring the circuit without the power crowbar bank, and (3) a power crowbar switch, which can handle 50 to 100 coulombs, so that a large number of crowbar switches will not be required when the power crowbar circuit is added. The problems with the start switches and the first crowbar switch have been solved, or alleviated. The development of a power crowbar switch has just begun
-
Optimal Path Choice in Railway Passenger Travel Network Based on Residual Train Capacity
Directory of Open Access Journals (Sweden)
Fei Dou
2014-01-01
Full Text Available Passenger’s optimal path choice is one of the prominent research topics in the field of railway passenger transport organization. More and more different train types are available, increasing path choices from departure to destination for travelers are unstoppable. However, travelers cannot avoid being confused when they hope to choose a perfect travel plan based on various travel time and cost constraints before departure. In this study, railway passenger travel network is constructed based on train timetable. Both the generalized cost function we developed and the residual train capacity are considered to be the foundation of path searching procedure. The railway passenger travel network topology is analyzed based on residual train capacity. Considering the total travel time, the total travel cost, and the total number of passengers, we propose an optimal path searching algorithm based on residual train capacity in railway passenger travel network. Finally, the rationale of the railway passenger travel network and the optimal path generation algorithm are verified positively by case study.
-
International Nuclear Information System (INIS)
Kim, Hui Jun
1993-06-01
This book concentrates on switch mode power supply. It has four parts, which are introduction of switch mode power supply with DC-DC converter such as Buck converter boost converter, Buck-boost converter and PWM control circuit, explanation for SMPS with DC-DC converter modeling and power mode control, resonance converter like resonance switch, converter, multi resonance converter and series resonance and parallel resonance converters, basic test of SMPS with PWM control circuit, Buck converter, Boost converter, flyback converter, forward converter and IC for control circuit.
-
New Switched-Dual-Source Multilevel Inverter for Symmetrical and Asymmetrical Operation
Directory of Open Access Journals (Sweden)
Kennedy Adinbo Aganah
2018-04-01
Full Text Available The increasing integration of large solar PV and wind farms into the power grid has fueled, over the past two decades, growing demands for high-power, high-voltage, utility-scale inverters. Multilevel inverters have emerged as the industry’s choice for megawatt-range inverters because of their reduced voltage stress, capability for generating an almost-sinusoidal voltage, built-in redundancy and other benefits. This paper presents a novel switched-source multilevel inverter (SS MLI architecture. This new inverter shows superior capabilities when compared to existing topologies. It has reduced voltage stress on the semiconductor, uses fewer switches (i.e., reduced size/weight/cost and exhibits increased efficiency. The proposed SS MLI is comprised of two voltage sources ( V 1 , V 2 and six switches. It is capable of generating five-level output voltage in symmetric mode (i.e., V 1 = V 2 and seven-level output voltage in asymmetric mode (i.e., V 1 ≠ V 2 . We present simulations results (using MATLAB®/Simulink® for five- and seven-level output voltages, and they strongly support the validity of the proposed inverter. These positive results are further supported experimentally using a laboratory prototype.
-
Energy Technology Data Exchange (ETDEWEB)
Baur, Guenter [Magaldi Power GmbH, Esslingen (Germany); Spindeldreher, Olaf [RWE Generation SE, Werne (Germany); RWE Generation SE, Essen (Germany)
2013-09-01
Secondary as well as substitute fuels are being used in hard coal-fired power plants to improve efficiency and to enlarge fuel flexibility. However, grinding and firing systems of the existing coal-fired plants are not designed for those co-fuels. Any deterioration of the combustion performance would reduce the power output and increase ash disposal costs by increased content of combustion residues. The application of air-cooled ash removal, with simultaneous and controlled post-combustion of unburned residues on the conveyor belt, enlarges the furnace and maintains combustion efficiency even with different fuel qualities. Plant efficiency can also be increased through heat recovery. (orig.)
-
Directory of Open Access Journals (Sweden)
Rui Wang
2015-09-01
Full Text Available The kiwifruit industry is booming worldwide. As a result, a great deal of kiwifruit waste residue (KWR containing monosaccharides is produced and discarded. This material shows great potential for the production of platform chemicals. In this study, a series of Nb/Al oxide catalysts were synthesized via a facile and low-cost coprecipitation method, and their structures were characterized using: thermal gravimetric analysis (TGA, XRD, FESEM, TEM, X-ray photoelectron spectroscopy (XPS, NH3-TPD, N2 adsorption-desorption, and FTIR-Pyridine adsorption. Experimental results of sugar-to-levulinic acid (LA conversion revealed that the 20%Nb/Al oxide catalyst provided the highest catalytic performance and durability in terms of LA yield from fructose (74.2% at 463 K after 10 min and from glucose (47.5% at 473 K after 15 min. Notably, the 20% Nb/Al oxide catalyst with a 10% dosage is capable of converting kiwifruit waste residue to LA at 473 K after 10 min. In conclusion, the enhanced catalytic performance was obtained due to the high acidity, and large surface areaof Nb/Al oxide catalyst.
-
Washing effects of limonene on pesticide residues in green peppers.
Lu, Hai-Yan; Shen, Yan; Sun, Xing; Zhu, Hong; Liu, Xian-Jin
2013-09-01
The presence of pesticide residues in food has caused much concern. The low health risks and environmental impacts of limonene make it a very interesting solvent for use in green chemistry. Washing effects of limonene on pesticide residues of methyl chlorpyrifos, chlorothalonil, chlorpyrifos, fenpropathrin and deltamethrin were investigated in green pepper. Results showed that washing with a low concentration of limonene for 5 min (where LOQ is limit of quantitation) caused 53.67%, limonene for 10 min produced 55.90%, limonene for 5 min was the optimal treatment for elimination of pesticide residues in green pepper, considering effect and treatment time as well as cost. © 2013 Society of Chemical Industry.
-
Chromatic interocular-switch rivalry.
Christiansen, Jens H; D'Antona, Anthony D; Shevell, Steven K
2017-05-01
Interocular-switch rivalry (also known as stimulus rivalry) is a kind of binocular rivalry in which two rivalrous images are swapped between the eyes several times a second. The result is stable periods of one image and then the other, with stable intervals that span many eye swaps (Logothetis, Leopold, & Sheinberg, 1996). Previous work used this close kin of binocular rivalry with rivalrous forms. Experiments here test whether chromatic interocular-switch rivalry, in which the swapped stimuli differ in only chromaticity, results in slow alternation between two colors. Swapping equiluminant rivalrous chromaticities at 3.75 Hz resulted in slow perceptual color alternation, with one or the other color often continuously visible for two seconds or longer (during which there were 15+ eye swaps). A well-known theory for sustained percepts from interocular-switch rivalry with form is inhibitory competition between binocular neurons driven by monocular neurons with matched orientation tuning in each eye; such binocular neurons would produce a stable response when a given orientation is swapped between the eyes. A similar model can account for the percepts here from chromatic interocular-switch rivalry and is underpinned by the neurophysiological finding that color-preferring binocular neurons are driven by monocular neurons from each eye with well-matched chromatic selectivity (Peirce, Solomon, Forte, & Lennie, 2008). In contrast to chromatic interocular-switch rivalry, luminance interocular-switch rivalry with swapped stimuli that differ in only luminance did not result in slowly alternating percepts of different brightnesses.
-
Marginal abatement cost curves for NOx that account for ...
A marginal abatement cost curve (MACC) traces out the relationship between the quantity of pollution abated and the marginal cost of abating each additional unit. In the context of air quality management, MACCs typically are developed by sorting end-of-pipe controls by their respective cost effectiveness. Alternative measures, such as renewable electricity, energy efficiency, and fuel switching (RE/EE/FS), are not considered as it is difficult to quantify their abatement potential. In this paper, we demonstrate the use of an energy system model to develop a MACC for nitrogen oxides (NOx) that incorporates both end-of-pipe controls and these alternative measures. We decompose the MACC by sector, and evaluate the cost-effectiveness of RE/EE/FS relative to end-of-pipe controls. RE/EE/FS are shown to produce considerable emission reductions after end-of-pipe controls have been exhausted. Furthermore, some RE/EE/FS are shown to be cost-competitive with end-of-pipe controls. Demonstrate how the MARKAL energy system model can be used to evaluate the potential role of renewable electricity, energy efficiency and fuel switching (RE/EE/FS) in achieving NOx reductions. For this particular analysis, we show that RE/EE/FSs are able to increase the quantity of NOx reductions available for a particular marginal cost (ranging from $5k per ton to $40k per ton) by approximately 50%.
-
Forage Harvest and Transport Costs
Energy Technology Data Exchange (ETDEWEB)
Butler, J.; Downing, M.; Turhollow, A.
1998-12-01
An engineering-economic approach is used to calculate harvest, in-field transport, and over-the-road transport costs for hay as bales and modules, silage, and crop residues as bales and modules. Costs included are equipment depreciation interest; fuel, lube, and oil; repairs; insurance, housing, and taxes; and labor. Field preparation, pest control, fertilizer, land, and overhead are excluded from the costs calculated Equipment is constrained by power available, throughput or carrying capacity, and field speed.
-
Optimization of multi-branch switched diversity systems
Nam, Haewoon; Alouini, Mohamed-Slim
2009-01-01
A performance optimization based on the optimal switching threshold(s) for a multi-branch switched diversity system is discussed in this paper. For the conventional multi-branch switched diversity system with a single switching threshold
-
Experience with PACS in an ATM/Ethernet switched network environment.
Pelikan, E; Ganser, A; Kotter, E; Schrader, U; Timmermann, U
1998-03-01
Legacy local area network (LAN) technologies based on shared media concepts are not adequate for the growth of a large-scale picture archiving and communication system (PACS) in a client-server architecture. First, an asymmetric network load, due to the requests of a large number of PACS clients for only a few main servers, should be compensated by communication links to the servers with a higher bandwidth compared to the clients. Secondly, as the number of PACS nodes increases, the network throughout should not measurably cut production. These requirements can easily be fulfilled using switching technologies. Here asynchronous transfer mode (ATM) is clearly one of the hottest topics in networking because the ATM architecture provides integrated support for a variety of communication services, and it supports virtual networking. On the other hand, most of the imaging modalities are not yet ready for integration into a native ATM network. For a lot of nodes already joining an Ethernet, a cost-effective and pragmatic way to benefit from the switching concept would be a combined ATM/Ethernet switching environment. This incorporates an incremental migration strategy with the immediate benefits of high-speed, high-capacity ATM (for servers and high-sophisticated display workstations), while preserving elements of the existing network technologies. In addition, Ethernet switching instead of shared media Ethernet improves the performance considerably. The LAN emulation (LANE) specification by the ATM forum defines mechanisms that allow ATM networks to coexist with legacy systems using any data networking protocol. This paper points out the suitability of this network architecture in accordance with an appropriate system design.
-
Molecular mechanism of the Syk activation switch.
Tsang, Emily; Giannetti, Anthony M; Shaw, David; Dinh, Marie; Tse, Joyce K Y; Gandhi, Shaan; Ho, Hoangdung; Wang, Sandra; Papp, Eva; Bradshaw, J Michael
2008-11-21
Many immune signaling pathways require activation of the Syk tyrosine kinase to link ligation of surface receptors to changes in gene expression. Despite the central role of Syk in these pathways, the Syk activation process remains poorly understood. In this work we quantitatively characterized the molecular mechanism of Syk activation in vitro using a real time fluorescence kinase assay, mutagenesis, and other biochemical techniques. We found that dephosphorylated full-length Syk demonstrates a low initial rate of substrate phosphorylation that increases during the kinase reaction due to autophosphorylation. The initial rate of Syk activity was strongly increased by either pre-autophosphorylation or binding of phosphorylated immune tyrosine activation motif peptides, and each of these factors independently fully activated Syk. Deletion mutagenesis was used to identify regions of Syk important for regulation, and residues 340-356 of the SH2 kinase linker region were identified to be important for suppression of activity before activation. Comparison of the activation processes of Syk and Zap-70 revealed that Syk is more readily activated by autophosphorylation than Zap-70, although both kinases are rapidly activated by Src family kinases. We also studied Syk activity in B cell lysates and found endogenous Syk is also activated by phosphorylation and immune tyrosine activation motif binding. Together these experiments show that Syk functions as an "OR-gate" type of molecular switch. This mechanism of switch-like activation helps explain how Syk is both rapidly activated after receptor binding but also sustains activity over time to facilitate longer term changes in gene expression.
-
Mourgias-Alexandris, G.; Moralis-Pegios, M.; Terzenidis, N.; Cherchi, M.; Harjanne, M.; Aalto, T.; Vyrsokinos, K.; Pleros, N.
2018-02-01
The urgent need for high-bandwidth and high-port connectivity in Data Centers has boosted the deployment of optoelectronic packet switches towards bringing high data-rate optics closer to the ASIC, realizing optical transceiver functions directly at the ASIC package for high-rate, low-energy and low-latency interconnects. Even though optics can offer a broad range of low-energy integrated switch fabrics for replacing electronic switches and seamlessly interface with the optical I/Os, the use of energy- and latency-consuming electronic SerDes continues to be a necessity, mainly dictated by the absence of integrated and reliable optical buffering solutions. SerDes undertakes the role of optimally synergizing the lower-speed electronic buffers with the incoming and outgoing optical streams, suggesting that a SerDes-released chip-scale optical switch fabric can be only realized in case all necessary functions including contention resolution and switching can be implemented on a common photonic integration platform. In this paper, we demonstrate experimentally a hybrid Broadcast-and-Select (BS) / wavelength routed optical switch that performs both the optical buffering and switching functions with μm-scale Silicon-integrated building blocks. Optical buffering is carried out in a silicon-integrated variable delay line bank with a record-high on-chip delay/footprint efficiency of 2.6ns/mm2 and up to 17.2 nsec delay capability, while switching is executed via a BS design and a silicon-integrated echelle grating, assisted by SOA-MZI wavelength conversion stages and controlled by a FPGA header processing module. The switch has been experimentally validated in a 3x3 arrangement with 10Gb/s NRZ optical data packets, demonstrating error-free switching operation with a power penalty of <5dB.
-
A residue-specific shift in stability and amyloidogenicity of antibody variable domains.
Nokwe, Cardine N; Zacharias, Martin; Yagi, Hisashi; Hora, Manuel; Reif, Bernd; Goto, Yuji; Buchner, Johannes
2014-09-26
Variable (V) domains of antibodies are essential for antigen recognition by our adaptive immune system. However, some variants of the light chain V domains (VL) form pathogenic amyloid fibrils in patients. It is so far unclear which residues play a key role in governing these processes. Here, we show that the conserved residue 2 of VL domains is crucial for controlling its thermodynamic stability and fibril formation. Hydrophobic side chains at position 2 stabilize the domain, whereas charged residues destabilize and lead to amyloid fibril formation. NMR experiments identified several segments within the core of the VL domain to be affected by changes in residue 2. Furthermore, molecular dynamic simulations showed that hydrophobic side chains at position 2 remain buried in a hydrophobic pocket, and charged side chains show a high flexibility. This results in a predicted difference in the dissociation free energy of ∼10 kJ mol(-1), which is in excellent agreement with our experimental values. Interestingly, this switch point is found only in VL domains of the κ family and not in VLλ or in VH domains, despite a highly similar domain architecture. Our results reveal novel insight into the architecture of variable domains and the prerequisites for formation of amyloid fibrils. This might also contribute to the rational design of stable variable antibody domains. © 2014 by The American Society for Biochemistry and Molecular Biology, Inc.
-
Riecke, Bernhard E; Feuereissen, Daniel; Rieser, John J; McNamara, Timothy P
2015-01-01
Self-motion can facilitate perspective switches and "automatic spatial updating" and help reduce disorientation in applications like virtual reality (VR). However, providing physical motion through moving-base motion simulators or free-space walking areas comes with high cost and technical complexity. This study provides first evidence that merely experiencing an embodied illusion of self-motion ("circular vection") can provide similar behavioral benefits as actual self-motion: Blindfolded participants were asked to imagine facing new perspectives in a well-learned room, and point to previously learned objects. Merely imagining perspective switches while stationary yielded worst performance. When perceiving illusory self-rotation to the novel perspective, however, performance improved significantly and yielded performance similar to actual rotation. Circular vection was induced by combining rotating sound fields ("auditory vection") and biomechanical vection from stepping along a carrousel-like rotating floor platter. In sum, illusory self-motion indeed facilitated perspective switches and thus spatial orientation, similar to actual self-motion, thus providing first compelling evidence of the functional significance and behavioral relevance of vection. This could ultimately enable us to complement the prevailing introspective vection measures with behavioral indicators, and guide the design for more affordable yet effective VR simulators that intelligently employ multi-modal self-motion illusions to reduce the need for costly physical observer motion.
-
Energy storage, compression, and switching. Vol. 2
International Nuclear Information System (INIS)
Nardi, V.; Bostick, W.H.; Sahlin, H.
1983-01-01
This book is a compilation of papers presented at the Second International Conference on Energy Storage, Compression, and Switching, which was held in order to assemble active researchers with a major interest in plasma physics, electron beams, electric and magnetic energy storage systems, high voltage and high current switches, free-electron lasers, and pellet implosion plasma focus. Topics covered include: Slow systems: 50-60 Hz machinery, homopolar generators, slow capacitors, inductors, and solid state switches; Intermediate systems: fast capacitor banks; superconducting storage and switching; gas, vacuum, and dielectric switching; nonlinear (magnetic) switching; imploding liners capacitors; explosive generators; and fuses; and Fast systems: Marx, Blumlein, oil, water, and pressurized water dielectrics; switches; magnetic insulation; electron beams; and plasmas
-
Energy Technology Data Exchange (ETDEWEB)
Voss, Gerhard [Ingenieurbuero IGV Elektrotechnik, Ladenburg (Germany)
2008-11-15
With enhanced exchange box systems many low voltage switch devices can be equipped more compact (less volume demand), cost friendly and more reliable because of advanced arc discharge safety engineering. Presented is utilization and operation in the facility managment and industrial applications in detail. In the last years operation-important standards have been revised for planners and users. So users and planners have to occupy with new standards for medium-voltage switching devices. This knowledge forms the conditions to design devices in future extensively to individual demands of the company and according to standards. (GL)
-
Residual stress analysis of drive shafts after induction hardening
Energy Technology Data Exchange (ETDEWEB)
Lemos, Guilherme Vieira Braga; Rocha, Alexandre da Silva; Nunes, Rafael Menezes, E-mail: lemos_gl@yahoo.com.br [Universidade Federal do Rio Grande do Sul (UFRS), Porto Algre, RS (Brazil); Hirsch, Thomas Karl [Stiftung Institut für Werkstofftechnik (IWT), Bremen (Germany)
2014-08-15
Typically, for automotive shafts, shape distortion manifests itself in most cases after the induction hardening by an effect known as bending. The distortion results in a boost of costs, especially due to machining parts in the hardened state to fabricate its final tolerances. In the present study, residual stress measurements were carried out on automotive drive shafts made of DIN 38B3 steel. The samples were selected in consequence of their different distortion properties by an industrial manufacturing line. One tested shaft was straightened, because of the considerable dimensional variation and the other one not. Firstly, the residual stress measurements were carried out by using a portable diffractometer, in order to avoid cutting the shafts and evaluate the original state of the stresses, and afterwards a more detailed analysis was realized by a conventional stationary diffractometer. The obtained results presented an overview of the surface residual stress profiles after induction hardening and displayed the influence of the straightening process on the redistribution of residual stresses. They also indicated that the effects of the straightening in the residual stresses cannot be neglected. (author)
-
A level switch with a sound tube
赤池, 誠規
2017-01-01
Level switches are sensor with an electrical contact output at a specific liquid, powder or bulk level. Most of traditional level switches are not suitable for harsh environments. The level switch in this study connects a loudspeaker on top end of the sound tube. When liquid, powder or bulk closes bottom end of the sound tube, the level switch turns on. The level switch is suitable for harsh environments and easy to install. The aim of this study is to propose a level switch with a sound tube...
-
Taxation on vehicle fuels: its impacts on switching to cleaner fuels
International Nuclear Information System (INIS)
Hung, W.-T.
2006-01-01
Vehicular consumption of fossil fuel contributes over 90% of air pollution in Hong Kong. A key strategy to improve Hong Kong's air quality is to discourage dirty fuels (e.g., leaded petrol and high-sulphur diesel) and to promote the use of clean fuels (e.g., low-sulphur diesel and liquefied petroleum gas (LPG)). This paper presents the empirical evidence on the effectiveness of the Government's clean fuel programs that offer tax subsidy to lower the consumption cost of such fuels. For the cases of unleaded petrol and ultra-low-sulphur diesel, lower fuel duties were offered so that the prices of these fuels were below those of leaded petrol and conventional diesel. Conventional petrol and diesel were phased out. In order to decide on the level of fuel duty concessions required to introduce LPG for taxis and bio-diesel for other vehicles, various Government-run trial programs were introduced to obtain cost estimates of using these alternative cleaner fuels. LPG using vehicles were subsequently exempted from the fuel duty in order to attract taxi and light bus operators to switch to LPG. It is apparent that the higher the subsidy, the faster is the rate at which switching to cleaner fuels takes place
-
Forest residue baling due diligence assessment, proving and transport trials
Energy Technology Data Exchange (ETDEWEB)
NONE
2000-07-01
Transport is known to be the most significant cost element to wood fuel supply cost, with the cost of comminution being the most variable depending on the method chosen. It has been shown in previous studies that wood fuel compaction in the form of compression can significantly increase the net load capability of the transport systems currently available, thereby leading to significant savings in delivered price. The study identified the Fiberpac residue compression machine suitable for use under UK conditions. The Fiberpac machine was trialled for a period of approximately 6 months to gain information on productivity, reliability and production costs. (author)
-
Advanced new technologies for residue upgrading
International Nuclear Information System (INIS)
Gillis, D.
1997-01-01
Viewgraphs summarizing UOP technologies for residue are provided. The upgrading technologies include: (1) Aquaconversion, (2) the Discriminatory Destructive Distillation process (3D), and (3) the RCD uniflex process. The Aquaconversion process is based on catalytic hydrovisbreaking. It makes use of a homogeneous (liquid phase) catalyst. The hydrogen is derived from water. The advantages of this process are improved residue stability and quality at higher conversion levels, high synthetic crude yields, low operational complexity, reduced transportation costs. The 3D process is a unique carbon rejection contaminant removal process which can process whole crudes through viscous residues. FCC type equipment is used. Performance characteristics and advantages of the process were highlighted. The RCD uniflex process makes use of proven fixed bed and ebullated bed technologies in a new process configuration in which the fixed bed system is located upstream of the ebullated bed system. In this process, the catalyst volume increases exponentially with increasing processing severity. Performance characteristics, design features, benefits and development progress to date are described. 1 tab., 21 figs
-
Superconductivity, energy storage and switching
International Nuclear Information System (INIS)
Laquer, H.L.
1974-01-01
The phenomenon of superconductivity can contribute to the technology of energy storage and switching in two distinct ways. On one hand the zero resistivity of the superconductor can produce essentially infinite time constants so that an inductive storage system can be charged from very low power sources. On the other hand, the recovery of finite resistivity in a normal-going superconducting switch can take place in extremely short times, so that a system can be made to deliver energy at a very high power level. Topics reviewed include: physics of superconductivity, limits to switching speed of superconductors, physical and engineering properties of superconducting materials and assemblies, switching methods, load impedance considerations, refrigeration economics, limitations imposed by present day and near term technology, performance of existing and planned energy storage systems, and a comparison with some alternative methods of storing and switching energy. (U.S.)
-
Nitrogen Immobilization in Plant Growth Substrates: Clean Chip Residual, Pine Bark, and Peatmoss
Directory of Open Access Journals (Sweden)
Cheryl R. Boyer
2012-01-01
Full Text Available Rising costs of potting substrates have caused horticultural growers to search for alternative, lower-cost materials. Objectives of this study were to determine the extent of nitrogen immobilization and microbial respiration in a high wood-fiber content substrate, clean chip residual. Microbial activity and nitrogen availability of two screen sizes (0.95 cm and 0.48 cm of clean chip residual were compared to control treatments of pine bark and peatmoss in a 60-day incubation experiment. Four rates (0, 1, 2, or 3 mg of supplemental nitrogen were assessed. Peatmoss displayed little microbial respiration over the course of the study, regardless of nitrogen rate; followed by pine bark, 0.95 cm clean chip residual, and 0.48 cm clean chip residual. Respiration increased with increasing nitrogen. Total inorganic nitrogen (plant available nitrogen was greatest with peatmoss; inorganic nitrogen in other treatments were similar at the 0, 1, and 2 mg supplemental nitrogen rates, while an increase occurred with the highest rate (3 mg. Clean chip residual and pine bark were similar in available nitrogen compared to peatmoss. This study suggests that nitrogen immobilization in substrates composed of clean chip residual is similar to pine bark and can be treated with similar fertilizer amendments during nursery production.
-
Directory of Open Access Journals (Sweden)
A. R. SHAMLOU
2017-12-01
Full Text Available In this paper, a novel two output nine switch-inverter is proposed in order to increase the synchronization speed of induction motors used in electric vehicles (EVs while improving the efficiency and controllability of the system. The number of switches in the proposed inverter is reduced by 25% compared to double six-switch inverters which conventionally used in EVs. The main characteristics of the considered inverter can be noted as follows: sinusoidal input and outputs, unity output power factor, and specifically, low construction cost due to active switch number reduction. The classical direct torque control method causes torque ripple and speed fluctuations. Therefore, in order to increase accuracy and dynamics of drive system, the SVM-DTC method is proposed, leading to less torque ripple and constant switching frequency. The obtained torque ripple is 2% which is less than the existing structures In order to illustrate advantages of the proposed approach, performance of the EVs in the standard cycles is evaluated.
-
Rocha, Pedro P; Raviram, Ramya; Fu, Yi; Kim, JungHyun; Luo, Vincent M; Aljoufi, Arafat; Swanzey, Emily; Pasquarella, Alessandra; Balestrini, Alessia; Miraldi, Emily R; Bonneau, Richard; Petrini, John; Schotta, Gunnar; Skok, Jane A
2016-06-28
During class switch recombination (CSR), B cells replace the Igh Cμ or δ exons with another downstream constant region exon (CH), altering the antibody isotype. CSR occurs through the introduction of AID-mediated double-strand breaks (DSBs) in switch regions and subsequent ligation of broken ends. Here, we developed an assay to investigate the dynamics of DSB formation in individual cells. We demonstrate that the upstream switch region Sμ is first targeted during recombination and that the mechanism underlying this control relies on 53BP1. Surprisingly, regulation of break order occurs through residual binding of 53BP1 to chromatin before the introduction of damage and independent of its established role in DNA repair. Using chromosome conformation capture, we show that 53BP1 mediates changes in chromatin architecture that affect break order. Finally, our results explain how changes in Igh architecture in the absence of 53BP1 could promote inversional rearrangements that compromise CSR. Copyright © 2016 The Author(s). Published by Elsevier Inc. All rights reserved.
-
Cost reduction through combined solutions?; Kostensenkung durch Kombinationsloesungen?
Energy Technology Data Exchange (ETDEWEB)
Bilitewski, B. [Technische Univ. Dresden (Germany). Inst. fuer Abfallwirtschaft und Altlasten
1998-09-01
The implementation of material-specific residue treatment processes requires reconstruction measures both in the case of mechanical-biological and in that of thermal treatment plants. Such measures involves great uncertainties and wide variation in cost prediction. The present paper deals with various factors that influence the costs of residual waste treatment. [Deutsch] Zur Umsetzung der stoffspezifischen Restabfallbehandlung sind Anpassungen sowohl der derzeit betriebenen mechanisch-biologischen als auch der thermischen Anlagen erforderlich, was zu Unsicherheiten und grossen Schwankungsbreiten bei den Kostenprognosen fuehrt. Der Bericht beleuchtet verschiedene Einflussgroessen auf die Kosten der Behandlung des Restabfalls. (orig./SR)
-
High Ripples Reduction in DTC of Induction Motor by Using a New Reduced Switching Table
Mokhtari, Bachir; Benkhoris, Mohamed F.
2016-05-01
The direct torque and flux control (DTC) of electrical motors is characterized by ripples of torque and flux. Among the many solutions proposed to reduce them is to use modified switching tables which is very advantageous; because its implementation is easy and requires no additional cost compared to other solutions. This paper proposes a new reduced switching table (RST) to improve the DTC by reducing harmful ripples of torque and flux. This new switching table is smaller than the conventional one (CST) and depends principally at the flux error. This solution is studied by simulation under Matlab/Simulink and experimentally validated on a testbed with DSPACE1103. The results obtained of a DTC with RST applied to a three-phase induction motor (IM) show a good improvement and an effectiveness of proposed solution, the torque ripple decreases about 47% and 3% for the stator flux compared with a basic DTC.
-
Optical Multidimensional Switching for Data Center Networks
DEFF Research Database (Denmark)
Kamchevska, Valerija
2017-01-01
. Software controlled switching using an on-chip integrated fiber switch is demonstrated and enabling of additional network functionalities such as multicast and optical grooming is experimentally confirmed. Altogether this work demonstrates the potential of optical switching technologies...... for the purpose of deploying optical switching within the network. First, the Hi-Ring data center architecture is proposed. It is based on optical multidimensional switching nodes that provide switching in hierarchically layered space, wavelength and time domain. The performance of the Hi-Ring architecture...... is evaluated experimentally and successful switching of both high capacity wavelength connections and time-shared subwavelengthconnections is demonstrated. Error-free performance is also achieved when transmitting 7 Tbit/s using multicore fiber, confirming the ability to scale the network. Moreover...
-
Pinning Synchronization of Switched Complex Dynamical Networks
Directory of Open Access Journals (Sweden)
Liming Du
2015-01-01
Full Text Available Network topology and node dynamics play a key role in forming synchronization of complex networks. Unfortunately there is no effective synchronization criterion for pinning synchronization of complex dynamical networks with switching topology. In this paper, pinning synchronization of complex dynamical networks with switching topology is studied. Two basic problems are considered: one is pinning synchronization of switched complex networks under arbitrary switching; the other is pinning synchronization of switched complex networks by design of switching when synchronization cannot achieved by using any individual connection topology alone. For the two problems, common Lyapunov function method and single Lyapunov function method are used respectively, some global synchronization criteria are proposed and the designed switching law is given. Finally, simulation results verify the validity of the results.
-
A 4 × 2 switch matrix in QFN24 package for 0.5–3 GHz application
International Nuclear Information System (INIS)
Liu Yuzhe; Mu Pengfei; Gong Renjie; Wan Jing; Zhang Yulin; Yan Yuepeng
2014-01-01
This paper presents a 4 × 2 switching matrix implemented in the Win 0.5 μm GaAs pseudomorphic high electron mobility transistor process, it covers the 0.5–3 GHz frequency range. The switch matrix is composed of 4 SPDT switch whose two output ports can simultaneously select the input port and a 4 to 8 bit digital decoder, both the radio frequency (RF) part and the digital part are integrated into one single chip. The chip is packaged in a low cost QFN24 plastic package. On chip shunt, capacitors at the input ports are taken to compensate for the bonding wire inductance effect. The designed switch matrix shows a good measured performance: the insertion loss is less than 5.5 dB, the isolation is no worse than 30 dB, the return loss of input ports and output ports is better than −10 dB, the input 1 dB compression point is better than 25.6 dBm, and the OIP3 is better than 37 dBm. The chip size of the switch matrix is only 1.45 × 1.45 mm 2 . (semiconductor integrated circuits)
-
Directory of Open Access Journals (Sweden)
Niek Wit
Full Text Available Monoubiquitylation of the homotrimeric DNA sliding clamp PCNA at lysine residue 164 (PCNA(K164 is a highly conserved, DNA damage-inducible process that is mediated by the E2/E3 complex Rad6/Rad18. This ubiquitylation event recruits translesion synthesis (TLS polymerases capable of replicating across damaged DNA templates. Besides PCNA, the Rad6/Rad18 complex was recently shown in yeast to ubiquitylate also 9-1-1, a heterotrimeric DNA sliding clamp composed of Rad9, Rad1, and Hus1 in a DNA damage-inducible manner. Based on the highly similar crystal structures of PCNA and 9-1-1, K185 of Rad1 (Rad1(K185 was identified as the only topological equivalent of PCNA(K164. To investigate a potential role of posttranslational modifications of Rad1(K185 in DNA damage management, we here generated a mouse model with a conditional deletable Rad1(K185R allele. The Rad1(K185 residue was found to be dispensable for Chk1 activation, DNA damage survival, and class switch recombination of immunoglobulin genes as well as recruitment of TLS polymerases during somatic hypermutation of immunoglobulin genes. Our data indicate that Rad1(K185 is not a functional counterpart of PCNA(K164.
-
Energy efficient SDN commodity switch based practical flow forwarding method
AlGhadhban, Amer
2016-07-04
Recent SDN researches suffer from over-accumulation of unhealthy flow-load. Instead, we leverage the SDN controller network view to encode the end-to-end path information into the packet address. Our solution EncPath significantly reduces the flow-table size and the number of control messages. Consequently, the power consumption of network switches is in orders of magnitude less than other evaluated solutions. It also provides flow management flexibility and scalability. We compare EncPath with single and multipath routing solutions and single path solution. Also, we operated them in proactive and reactive modes. We find that EncPath flow entries in core switches in a multihomed fat-tree with 144 hosts is approximately 1000 times smaller than Equal-Cost MultiPath (ECMP) and random routing. Additionally, the number of control messages to setup the network is reduced by a factor of 200×. This, consequently, affords data-plane and control-plane devices space to process other tasks. © 2016 IEEE.
-
Quadratic residues and non-residues selected topics
Wright, Steve
2016-01-01
This book offers an account of the classical theory of quadratic residues and non-residues with the goal of using that theory as a lens through which to view the development of some of the fundamental methods employed in modern elementary, algebraic, and analytic number theory. The first three chapters present some basic facts and the history of quadratic residues and non-residues and discuss various proofs of the Law of Quadratic Reciprosity in depth, with an emphasis on the six proofs that Gauss published. The remaining seven chapters explore some interesting applications of the Law of Quadratic Reciprocity, prove some results concerning the distribution and arithmetic structure of quadratic residues and non-residues, provide a detailed proof of Dirichlet’s Class-Number Formula, and discuss the question of whether quadratic residues are randomly distributed. The text is a valuable resource for graduate and advanced undergraduate students as well as for mathematicians interested in number theory.
-
Nudging Leads Consumers In Colorado To Shop But Not Switch ACA Marketplace Plans.
Marzilli Ericson, Keith M; Kingsdale, Jon; Layton, Tim; Sacarny, Adam
2017-02-01
The Affordable Care Act (ACA) dramatically expanded the use of regulated marketplaces in health insurance, but consumers often fail to shop for plans during open enrollment periods. Typically these consumers are automatically reenrolled in their old plans, which potentially exposes them to unexpected increases in their insurance premiums and cost sharing. We conducted a randomized intervention to encourage enrollees in an ACA Marketplace to shop for plans. We tested the effect of letters and e-mails with personalized information about the savings on insurance premiums that they could realize from switching plans and the effect of generic communications that simply emphasized the possibility of saving. The personalized and generic messages both increased shopping on the Marketplace's website by 23 percent, but neither type of message had a significant effect on plan switching. These findings show that simple "nudges" with even generic information can promote shopping in health insurance marketplaces, but whether they can lead to switching remains an open question. Project HOPE—The People-to-People Health Foundation, Inc.
-
All-fibre Q-switching YDFL operation with bismuth-doped fibre as saturable absorber
Muhammad, A. R.; Haris, H.; Arof, H.; Tan, S. J.; Ahmad, M. T.; Harun, S. W.
2018-05-01
We demonstrate the generation of a passively Q-switched ytterbium-doped fibre laser (YDFL) using a bismuth-doped fibre (BDF) as a solid-state fibre saturable absorber (FSA) in a ring cavity. The BDF used has a wide and low absorption band of 5 dB/m at the 1.0 μm region due to the ion transition of ? that occurs around the region. When introduced into a YDFL laser cavity, a stable Q-switched pulse operation was observed and the pulse repetition rate was proportional to the input pump power. It was limited to 72.99 kHz by the maximum power that the laser diode could supply. Meanwhile, the pulse width decreased from 12.22 to 4.85 μs as the pump power was increased from 215.6 to 475.6 mW. The finding suggests that BDF could be used as a potential SA for the development of robust, compact, efficient and low cost Q-switched fibre lasers operating at 1 micron region.
-
Monolithic, High-Speed Fiber-Optic Switching Array for Lidar
Suckow, Will; Roberts, Tony; Switzer, Gregg; Terwilliger, Chelle
2011-01-01
Current fiber switch technologies use mechanical means to redirect light beams, resulting in slow switch time, as well as poor reliability due to moving parts wearing out quickly at high speeds. A non-mechanical ability to switch laser output into one of multiple fibers within a fiber array can provide significant power, weight, and costs savings to an all-fiber system. This invention uses an array of crystals that act as miniature prisms to redirect light as an electric voltage changes the prism s properties. At the heart of the electro-optic fiber-optic switch is an electro- optic crystal patterned with tiny prisms that can deflect the beam from the input fiber into any one of the receiving fibers arranged in a linear array when a voltage is applied across the crystal. Prism boundaries are defined by a net dipole moment in the crystal lattice that has been poled opposite to the surrounding lattice fabricated using patterned, removable microelectrodes. When a voltage is applied across the crystal, the resulting electric field changes the index of refraction within the prism boundaries relative to the surrounding substrate, causing light to deflect slightly according to Snell s Law. There are several materials that can host the necessary monolithic poled pattern (including, but not limited to, SLT, KTP, LiNbO3, and Mg:LiNbO3). Be cause this is a solid-state system without moving parts, it is very fast, and does not wear down easily. This invention is applicable to all fiber networks, as well as industries that use such networks. The unit comes in a compact package, can handle both low and high voltages, and has a high reliability (100,000 hours without maintenance).
-
Wide Bandgap Extrinsic Photoconductive Switches
Energy Technology Data Exchange (ETDEWEB)
Sullivan, James S. [State Univ. of New York (SUNY), Plattsburgh, NY (United States); Univ. of California, Davis, CA (United States)
2012-01-20
Photoconductive semiconductor switches (PCSS) have been investigated since the late 1970s. Some devices have been developed that withstand tens of kilovolts and others that switch hundreds of amperes. However, no single device has been developed that can reliably withstand both high voltage and switch high current. Yet, photoconductive switches still hold the promise of reliable high voltage and high current operation with subnanosecond risetimes. Particularly since good quality, bulk, single crystal, wide bandgap semiconductor materials have recently become available. In this chapter we will review the basic operation of PCSS devices, status of PCSS devices and properties of the wide bandgap semiconductors 4H-SiC, 6H-SiC and 2H-GaN.
-
Electron collisions in gas switches
International Nuclear Information System (INIS)
Christophorou, L.G.
1989-01-01
Many technologies rely on the conduction/insulation properties of gaseous matter for their successful operation. Many others (e.g., pulsed power technologies) rely on the rapid change (switching or modulation) of the properties of gaseous matter from an insulator to a conductor and vice versa. Studies of electron collision processes in gases aided the development of pulsed power gas switches, and in this paper we shall briefly illustrate the kind of knowledge on electron collision processes which is needed to optimize the performance of such switching devices. To this end, we shall refer to three types of gas switches: spark gap closing, self-sustained diffuse discharge closing, and externally-sustained diffuse discharge opening. 24 refs., 15 figs., 2 tabs
-
47 CFR 69.106 - Local switching.
2010-10-01
... foreign services that use local exchange switching facilities. (c) If end users of an interstate or... local exchange carriers shall establish rate elements for local switching as follows: (1) Price cap... use local exchange switching facilities for the provision of interstate or foreign services. The...
-
Proceedings of the switched power workshop
International Nuclear Information System (INIS)
Fernow, R.C.
1988-01-01
These proceedings contain most of the presentations given at a workshop on the current state of research in techniques for switched power acceleration. The proceedings are divided, as was the workshop itself, into two parts. Part 1, contains the latest results from a number of groups active in switched power research. The major topic here is a method for switching externally supplied power onto a transmission line. Advocates for vacuum photodiode switching, solid state switching, gas switching, and synthetic pulse generation are all presented. Other important areas of research described in this section concern: external electrical and laser pulsing systems; the properties of the created electromagnetic pulse; structures used for transporting the electromagnetic pulse to the region where the electron beam is located; and possible applications. Part 2 of the proceedings considers the problem of designing a high brightness electron gun using switched power as the power source. This is an important first step in demonstrating the usefulness of switched power techniques for accelerator physics. In addition such a gun could have immediate practical importance for advanced acceleration studies since the brightness could exceed that of present sources by several orders of magnitude. I would like to take this opportunity to thank Kathleen Tuohy and Patricia Tuttle for their assistance in organizing and running the workshop. Their tireless efforts contribute greatly to a very productive meeting
-
Song, Zhiwei; Li, Gang; Xiong, Ying; Cheng, Chuanpin; Zhang, Wanli; Tang, Minghua; Li, Zheng; He, Jiangheng
2018-05-01
A memory device with a Pt/SrBi2Ta2O9(SBT)/Pt(111) structure was shown to have excellent combined ferroelectricity and resistive switching properties, leading to higher multistate storage memory capacity in contrast to ferroelectric memory devices. In this device, SBT polycrystalline thin films with significant (115) orientation were fabricated on Pt(111)/Ti/SiO2/Si(100) substrates using CVD (chemical vapor deposition) method. Measurement results of the electric properties exhibit reproducible and reliable ferroelectricity switching behavior and bipolar resistive switching effects (BRS) without an electroforming process. The ON/OFF ratio of the resistive switching was found to be about 103. Switching mechanisms for the low resistance state (LRS) and high resistance state (HRS) currents are likely attributed to the Ohmic and space charge-limited current (SCLC) behavior, respectively. Moreover, the ferroelectricity and resistive switching effects were found to be mutually independent, and the four logic states were obtained by controlling the periodic sweeping voltage. This work holds great promise for nonvolatile multistate memory devices with high capacity and low cost.
-
Resistance switching memory in perovskite oxides
International Nuclear Information System (INIS)
Yan, Z.B.; Liu, J.-M.
2015-01-01
The resistance switching behavior has recently attracted great attentions for its application as resistive random access memories (RRAMs) due to a variety of advantages such as simple structure, high-density, high-speed and low-power. As a leading storage media, the transition metal perovskite oxide owns the strong correlation of electrons and the stable crystal structure, which brings out multifunctionality such as ferroelectric, multiferroic, superconductor, and colossal magnetoresistance/electroresistance effect, etc. The existence of rich electronic phases, metal–insulator transition and the nonstoichiometric oxygen in perovskite oxide provides good platforms to insight into the resistive switching mechanisms. In this review, we first introduce the general characteristics of the resistance switching effects, the operation methods and the storage media. Then, the experimental evidences of conductive filaments, the transport and switching mechanisms, and the memory performances and enhancing methods of perovskite oxide based filamentary RRAM cells have been summarized and discussed. Subsequently, the switching mechanisms and the performances of the uniform RRAM cells associating with the carrier trapping/detrapping and the ferroelectric polarization switching have been discussed. Finally, the advices and outlook for further investigating the resistance switching and enhancing the memory performances are given
-
Biofuels from stumps and small roundwood - Costs and CO{sub 2} benefits
Energy Technology Data Exchange (ETDEWEB)
Eriksson, Lisa Naeslund; Gustavsson, Leif [Ecotechnology, Department of Engineering, Physics and Mathematics, Mid Sweden University, SE-831 25 Oestersund (Sweden)
2008-10-15
In this study, we analysed and compared costs, primary energy use and CO{sub 2} benefits of recovering stumps and small roundwood from thinnings, together with logging residues. Small roundwood, chipped at a terminal or end-user, has a cost comparable to the chip system and a primary energy use comparable to the bundle system used for recovery of logging residues. The small roundwood system with roadside chipping is more expensive. As productivity in the cutting process improves, the small roundwood alternatives become more cost-effective. The stump system has costs in the same range as or lower than the chip and bundle systems. Forestry operations for stump and small roundwood recovery require considerable primary energy, but net recovery per hectare is much greater than for the chip and bundle systems, which means that more fossil fuel can be displaced per hectare of clearcut than with a chip or a bundle system. Stumps and small roundwood from thinnings can become as cost-effective as logging residues in the near future. Furthermore, when stumps and small roundwood from thinnings are also used to replace fossil fuels, the potential CO{sub 2} reduction will be about four times as great as when only logging residues are used with a traditional chip system. (author)
-
Clocking Scheme for Switched-Capacitor Circuits
DEFF Research Database (Denmark)
Steensgaard-Madsen, Jesper
1998-01-01
A novel clocking scheme for switched-capacitor (SC) circuits is presented. It can enhance the understanding of SC circuits and the errors caused by MOSFET (MOS) switches. Charge errors, and techniques to make SC circuits less sensitive to them are discussed.......A novel clocking scheme for switched-capacitor (SC) circuits is presented. It can enhance the understanding of SC circuits and the errors caused by MOSFET (MOS) switches. Charge errors, and techniques to make SC circuits less sensitive to them are discussed....
-
Manually operated coded switch
International Nuclear Information System (INIS)
Barnette, J.H.
1978-01-01
The disclosure related to a manually operated recodable coded switch in which a code may be inserted, tried and used to actuate a lever controlling an external device. After attempting a code, the switch's code wheels must be returned to their zero positions before another try is made
-
International Nuclear Information System (INIS)
Miao Jie-Guang; Pan Yu-Zhai; Qu Shi-Liang
2012-01-01
The first experimental comparison between the actively and passively Q-switched intracavity optical parametric oscillators (IOPOs) at 1.57 μm driven by a small-scale diode-pumped Nd:YVO 4 laser are thoroughly presented. It is found that the performances of the two types of IOPOs are complementary. The actively Q-switched IOPO features a shorter pulse duration, a higher peak power, and a superior power and pulse stability. However, in terms of compactness, operation threshold and conversion efficiency, passively Q-switched IOPOs are more attractive. It is further indicated that the passively Q-switched IOPO at 1.57μm is a promising and cost-effective eye-safe laser source, especially at the low and moderate output levels. In addition, instructional improvement measures for the two types of IOPOs are also summarized. (fundamental areas of phenomenology(including applications))
-
Energy Technology Data Exchange (ETDEWEB)
Agamy, Mohammed; Harfman-Todorovic, Maja; Elasser, Ahmed; Essakiappan, Somasundaram
2013-03-01
Photovoltaic architectures with distributed power electronics provide many advantages in terms of energy yield as well as system level optimization. As the power level of the solar farm increases it becomes more beneficial to increase the dc collection network voltage, which requires the use of power devices with higher voltage ratings, and thus making the design of efficient, low cost, distributed power converters more challenging. In this paper a simple partial power converter topology is proposed. The topology is implemented using a three-level switching cell, which allows the use of semiconductor devices with lower voltage rating; thus improving design and performance and reducing converter cost. This makes the converters suitable for use for medium to high power applications where dc-link voltages of 600V~1kV may be needed without the need for high voltage devices. Converter operation and experimental results are presented for two partial power circuit variants using three-level switching cells.
-
Economic methods for the utilisation of logging residues
Directory of Open Access Journals (Sweden)
Gałęzia Tomasz
2016-03-01
Full Text Available There are several ways of using logging residues, and the two most common ones in the State Forests are wood chip production for energy purposes by mobile machinery and crushing by tractor-powered crushers. In this research, an economy-based approach was used to compare these methods and assess whether chip production is superior to crushing for clearing a felling area. The average revenues from the sale of wood biomass in the form of wood chips and the average costs of crushing in the Pomorze Forest District were analysed for the period from January 2012 until June 2014. Both revenues and costs (such as fuel, operator’s wage, piling costs, depreciation, insurance and garaging costs were extracted from the State Forests’ database using data-mining software.
-
Observer-Based Robust Control of Uncertain Switched Fuzzy Systems with Combined Switching Controller
Directory of Open Access Journals (Sweden)
Hong Yang
2013-01-01
Full Text Available The observer-based robust control for a class of switched fuzzy (SF time-delay systems involving uncertainties and external disturbances is investigated in this paper. A switched fuzzy system, which differs from existing ones, is firstly employed to describe a nonlinear system. Next, a combined switching controller is proposed. The designed controller based on the observer instead of the state information integrates the advantages of both the switching controllers and the supplementary controllers but eliminates their disadvantages. The proposed controller provides good performance during the transient period, and the chattering effect is removed when the system state approaches the origin. Sufficient condition for the solvability of the robust control problem is given for the case that the state of system is not available. Since convex combination techniques are used to derive the delay-independent criteria, some subsystems are allowed to be unstable. Finally, various comparisons of the elaborated examples are conducted to demonstrate the effectiveness of the proposed control design approach.
-
Synchronization in complex networks with switching topology
International Nuclear Information System (INIS)
Wang, Lei; Wang, Qing-guo
2011-01-01
This Letter investigates synchronization issues of complex dynamical networks with switching topology. By constructing a common Lyapunov function, we show that local and global synchronization for a linearly coupled network with switching topology can be evaluated by the time average of second smallest eigenvalues corresponding to the Laplacians of switching topology. This result is quite powerful and can be further used to explore various switching cases for complex dynamical networks. Numerical simulations illustrate the effectiveness of the obtained results in the end. -- Highlights: → Synchronization of complex networks with switching topology is investigated. → A common Lyapunov function is established for synchronization of switching network. → The common Lyapunov function is not necessary to monotonically decrease with time. → Synchronization is determined by the second smallest eigenvalue of its Laplacian. → Synchronization criterion can be used to investigate various switching cases.
-
Research and embedded implementation of Layer 3 switch
Song, Jin; Cheng, Zijing
2009-12-01
In the internetworking world, switches and routers have been deployed for workgroup and enterprise connectivity. In the past, switches mainly operated at Layer 2 (they were extensions of bridges), while routers were clearly Layer3 devices. Recently, the line has blurred and switches operating at Layer 3 are becoming more popular. This paper explains the Linux Bridge, Layer 2 Switches, Virtual LAN (VLAN) and Layer 3 Switches. The flow chart of Layer 3 switches and working routine related to Layer 3 switch technology were investigated in detail. This paper presents a new method to implement layer 3 switching that is entirely accomplished in software and is embedded implemented by code transplanting based on PowerPC 460GT platform.
-
DEFF Research Database (Denmark)
FARRELL, AP; STEFFENSEN, JF
1987-01-01
Experimental data are available for the oxygen cost of the branchial and cardiac pumps in fish. These data were used to theoretically analyze the relative oxygen cost of these pumps during rest and swimming in rainbow troutSalmo gairdneri. Efficiency of the heart increases with activity and so...... the relative oxygen cost of the cardiac pumps decreased from 4.6% at rest to 1.9% at the critical swimming speed. The relative oxygen cost of the branchial pump is significant in the resting and slowly swimming fish, being 10 to 15% of total oxygen uptake. However, when swimming trout switch to a ram mode...... of ventilation, a considerable saving in oxygen cost is accrued by switching the cost of ventilation from the branchial to the tail musculature. Thus, the relative oxygen cost of the branchial and cardiac pumps actually decreases at critical swimming speed compared to rest and therefore is unlikely to be a major...
-
Combining SDM-Based Circuit Switching with Packet Switching in a Router for On-Chip Networks
Directory of Open Access Journals (Sweden)
Angelo Kuti Lusala
2012-01-01
Full Text Available A Hybrid router architecture for Networks-on-Chip “NoC” is presented, it combines Spatial Division Multiplexing “SDM” based circuit switching and packet switching in order to efficiently and separately handle both streaming and best-effort traffic generated in real-time applications. Furthermore the SDM technique is combined with Time Division Multiplexing “TDM” technique in the circuit switching part in order to increase path diversity, thus improving throughput while sharing communication resources among multiple connections. Combining these two techniques allows mitigating the poor resource usage inherent to circuit switching. In this way Quality of Service “QoS” is easily provided for the streaming traffic through the circuit-switched sub-router while the packet-switched sub-router handles best-effort traffic. The proposed hybrid router architectures were synthesized, placed and routed on an FPGA. Results show that a practicable Network-on-Chip “NoC” can be built using the proposed router architectures. 7 × 7 mesh NoCs were simulated in SystemC. Simulation results show that the probability of establishing paths through the NoC increases with the number of sub-channels and has its highest value when combining SDM with TDM, thereby significantly reducing contention in the NoC.
-
Directory of Open Access Journals (Sweden)
Viorel DUGAN
2002-12-01
Full Text Available The paper deals to design and to compute the snubber parameters influence on the switching and conduction losses of the transistors (IGBT used as bidirectional switches in a converter with switched capacitor. The converter was modelled with difference equations, and the transistors during turn-on and turn-off processes were simulated by dynamically varying resistance models. The energy loss per switching, commutation time, the variation of the transistor voltage etc. and the influence of snubber parameters in each of these cases are shown in the context of a converter used as a 50Hz reactive power controller unit
-
Upgraded wood residue fuels 1995; Foeraedlade traedbraenslen 1995
Energy Technology Data Exchange (ETDEWEB)
Vinterbaeck, J [Swedish Univ. of Agricultural Science, Uppsala (Sweden). Dept. of Forest-Industry-Market Studies
1995-11-01
The Swedish market for upgraded residue fuels, i.e. briquettes, pellets and wood powder, has developed considerably during the nineties. The additional costs for the upgrading processes are regained and create a surplus in other parts of the system, e.g. in the form of higher combustion efficiencies, lower investment costs for burning equipment, lower operation costs and a diminished environmental impact. All these factors put together have resulted in a rapid growth of this part of the energy sector. In 1994 the production was 1.9 TWh, an increase of 37 % compared to the previous year. In the forthcoming heating season 1995/96 the production may reach 4 TWh. 57 refs, 11 figs, 6 tabs