WorldWideScience

Sample records for residual capacity residual

  1. Perioperative functional residual capacity.

    Science.gov (United States)

    Wahba, R W

    1991-04-01

    The literature dealing with the magnitude, mechanism and effects of reduced FRC in the perioperative period is reviewed. During general anaesthesia FRC is reduced by approximately 20%. The reduction is greater in the obese and in patients with COPD. The most likely mechanism is the loss of inspiratory muscle tone of the muscles acting on the rib cage. Gas trapping is an additional mechanism. Lung compliance decreases and airways resistance increases, in large part, due to decreased FRC. The larynx is displaced anteriorly and elongated, making laryngoscopy and intubation more difficult. The change in FRC creates or increases intrapulmonary shunt and areas of low ventilation to perfusion. This is due to the occurrence of compression atelectasis, and to regional changes in mechanics and airway closure which tend to reduce ventilation to dependent lung zones which are still well perfused. Abdominal and thoracic operations tend to increase shunting further. Large tidal volume but not PEEP will improve oxygenation, although both increase FRC. Both FRC and vital capacity are reduced following abdominal and thoracic surgery in a predictable pattern. The mechanism is the combined effect of incisional pain and reflex dysfunction of the diaphragm. Additional effects of thoracic surgery include pleural effusion, cooling of the phrenic nerve and mediastinal widening. Postoperative hypoxaemia is a function of reduced FRC and airway closure. There is no real difference among the various methods of active lung expansion in terms of the speed of restoration of lung function, or in preventing postoperative atelectasis/pneumonia. Epidural analgesia does not influence the rate of recovery of lung function, nor does it prevent atelectasis/pneumonia.

  2. Functional residual capacity measurement by heptafluoropropane in ventilated newborn lungs

    OpenAIRE

    Kusztrich, Ariane

    2012-01-01

    Objective: Heptafluoropropane is an inert gas commercially used as propellant for inhalers. Since heptafluoropropane can be detected in low concentrations, it could also be used as a tracer gas to measure functional residual capacity. The aim of the present study was to validate functional residual capacity measurements by heptafluoropropane wash-in/wash-out (0.8%) during mechanical ventilation in small, surfactant-depleted lungs using a newborn piglet model. Design: Prospective laborato...

  3. Residual capacity estimation of bridges using structural health monitoring data

    Science.gov (United States)

    Baghaei, Reza; Feng, Maria Q.; Torbol, Marco

    2011-04-01

    In this study, a vibration-based procedure for residual capacity estimation of bridges after damaging earthquake events is proposed. The procedure starts with estimation of collapse capacity of the intact bridge using incremental dynamic analysis (IDA) curves. The collapse capacity is defined as the median intensity level of the earthquakes that cause global or local collapse within the structure. A database of post-earthquake modal properties is created by calculating the analytical modal properties of the bridge after each nonlinear response history analysis performed for generation IDA curves. After the damaging event, experimental modal properties of the bridge are identified from vibration measurements of the bridge. These properties along with the modal properties database are used to find ground motionintensity pairs that can drive nonlinear FE model of the structure to the current damage state of the bridge. The IDA curves corresponding to the damaged FE model of the bridge are subsequently used to estimate amount of loss in collapse capacity of the damaged structure. Estimated loss in capacity of the bridge besides the bridge-site-specific seismic hazard curves are used to update the functionality status of the bridge. Proposed procedure is applied to experimental data from a large-scale shake table test on a quarter-scale model of a short-span reinforced concrete bridge. The bridge was subjected to a series of earthquake ground motions introducing progressive seismic damage to the bridge which finally led to the failure of one of the bents. Residual collapse capacity and functionality status of the bridge are updated at different stages of the experiment using the proposed procedure.

  4. Residual deposits (residual soil)

    International Nuclear Information System (INIS)

    Khasanov, A.Kh.

    1988-01-01

    Residual soil deposits is accumulation of new formate ore minerals on the earth surface, arise as a result of chemical decomposition of rocks. As is well known, at the hyper genes zone under the influence of different factors (water, carbonic acid, organic acids, oxygen, microorganism activity) passes chemical weathering of rocks. Residual soil deposits forming depends from complex of geologic and climatic factors and also from composition and physical and chemical properties of initial rocks

  5. Residuation theory

    CERN Document Server

    Blyth, T S; Sneddon, I N; Stark, M

    1972-01-01

    Residuation Theory aims to contribute to literature in the field of ordered algebraic structures, especially on the subject of residual mappings. The book is divided into three chapters. Chapter 1 focuses on ordered sets; directed sets; semilattices; lattices; and complete lattices. Chapter 2 tackles Baer rings; Baer semigroups; Foulis semigroups; residual mappings; the notion of involution; and Boolean algebras. Chapter 3 covers residuated groupoids and semigroups; group homomorphic and isotone homomorphic Boolean images of ordered semigroups; Dubreil-Jacotin and Brouwer semigroups; and loli

  6. 20 CFR 220.120 - The claimant's residual functional capacity.

    Science.gov (United States)

    2010-04-01

    ... limitations that go beyond the symptoms, such as pain, that are important in the diagnosis and treatment of... with a low back disorder may be fully capable of the physical demands consistent with those of... functional capacity. (a) General. The claimant's impairment(s), and any related symptoms, such as pain, may...

  7. Residue processing

    Energy Technology Data Exchange (ETDEWEB)

    Gieg, W.; Rank, V.

    1942-10-15

    In the first stage of coal hydrogenation, the liquid phase, light and heavy oils were produced; the latter containing the nonliquefied parts of the coal, the coal ash, and the catalyst substances. It was the problem of residue processing to extract from these so-called let-down oils that which could be used as pasting oils for the coal. The object was to obtain a maximum oil extraction and a complete removal of the solids, because of the latter were returned to the process they would needlessly burden the reaction space. Separation of solids in residue processing could be accomplished by filtration, centrifugation, extraction, distillation, or low-temperature carbonization (L.T.C.). Filtration or centrifugation was most suitable since a maximum oil yield could be expected from it, since only a small portion of the let-down oil contained in the filtration or centrifugation residue had to be thermally treated. The most satisfactory centrifuge at this time was the Laval, which delivered liquid centrifuge residue and centrifuge oil continuously. By comparison, the semi-continuous centrifuges delivered plastic residues which were difficult to handle. Various apparatus such as the spiral screw kiln and the ball kiln were used for low-temperature carbonization of centrifuge residues. Both were based on the idea of carbonization in thin layers. Efforts were also being made to produce electrode carbon and briquette binder as by-products of the liquid coal phase.

  8. Residual risk

    African Journals Online (AJOL)

    ing the residual risk of transmission of HIV by blood transfusion. An epidemiological approach assumed that all HIV infections detected serologically in first-time donors were pre-existing or prevalent infections, and that all infections detected in repeat blood donors were new or incident infections. During 1986 - 1987,0,012%.

  9. Residual basins

    International Nuclear Information System (INIS)

    D'Elboux, C.V.; Paiva, I.B.

    1980-01-01

    Exploration for uranium carried out over a major portion of the Rio Grande do Sul Shield has revealed a number of small residual basins developed along glacially eroded channels of pre-Permian age. Mineralization of uranium occurs in two distinct sedimentary units. The lower unit consists of rhythmites overlain by a sequence of black shales, siltstones and coal seams, while the upper one is dominated by sandstones of probable fluvial origin. (Author) [pt

  10. Optimal Path Choice in Railway Passenger Travel Network Based on Residual Train Capacity

    Directory of Open Access Journals (Sweden)

    Fei Dou

    2014-01-01

    Full Text Available Passenger’s optimal path choice is one of the prominent research topics in the field of railway passenger transport organization. More and more different train types are available, increasing path choices from departure to destination for travelers are unstoppable. However, travelers cannot avoid being confused when they hope to choose a perfect travel plan based on various travel time and cost constraints before departure. In this study, railway passenger travel network is constructed based on train timetable. Both the generalized cost function we developed and the residual train capacity are considered to be the foundation of path searching procedure. The railway passenger travel network topology is analyzed based on residual train capacity. Considering the total travel time, the total travel cost, and the total number of passengers, we propose an optimal path searching algorithm based on residual train capacity in railway passenger travel network. Finally, the rationale of the railway passenger travel network and the optimal path generation algorithm are verified positively by case study.

  11. Optimal path choice in railway passenger travel network based on residual train capacity.

    Science.gov (United States)

    Dou, Fei; Yan, Kai; Huang, Yakun; Wang, Li; Jia, Limin

    2014-01-01

    Passenger's optimal path choice is one of the prominent research topics in the field of railway passenger transport organization. More and more different train types are available, increasing path choices from departure to destination for travelers are unstoppable. However, travelers cannot avoid being confused when they hope to choose a perfect travel plan based on various travel time and cost constraints before departure. In this study, railway passenger travel network is constructed based on train timetable. Both the generalized cost function we developed and the residual train capacity are considered to be the foundation of path searching procedure. The railway passenger travel network topology is analyzed based on residual train capacity. Considering the total travel time, the total travel cost, and the total number of passengers, we propose an optimal path searching algorithm based on residual train capacity in railway passenger travel network. Finally, the rationale of the railway passenger travel network and the optimal path generation algorithm are verified positively by case study.

  12. RESIDUAL RISK ASSESSMENTS - RESIDUAL RISK ...

    Science.gov (United States)

    This source category previously subjected to a technology-based standard will be examined to determine if health or ecological risks are significant enough to warrant further regulation for Coke Ovens. These assesments utilize existing models and data bases to examine the multi-media and multi-pollutant impacts of air toxics emissions on human health and the environment. Details on the assessment process and methodologies can be found in EPA's Residual Risk Report to Congress issued in March of 1999 (see web site). To assess the health risks imposed by air toxics emissions from Coke Ovens to determine if control technology standards previously established are adequately protecting public health.

  13. Residual nilpotence and residual solubility of groups

    International Nuclear Information System (INIS)

    Mikhailov, R V

    2005-01-01

    The properties of the residual nilpotence and the residual solubility of groups are studied. The main objects under investigation are the class of residually nilpotent groups such that each central extension of these groups is also residually nilpotent and the class of residually soluble groups such that each Abelian extension of these groups is residually soluble. Various examples of groups not belonging to these classes are constructed by homological methods and methods of the theory of modules over group rings. Several applications of the theory under consideration are presented and problems concerning the residual nilpotence of one-relator groups are considered.

  14. An adsorbent with a high adsorption capacity obtained from the cellulose sludge of industrial residues.

    Science.gov (United States)

    Orlandi, Géssica; Cavasotto, Jéssica; Machado, Francisco R S; Colpani, Gustavo L; Magro, Jacir Dal; Dalcanton, Francieli; Mello, Josiane M M; Fiori, Márcio A

    2017-02-01

    One of the major problems in effluent treatment plants of the cellulose and paper industry is the large amount of residual sludge generated. Therefore, this industry is trying to develop new methods to treat such residues and to use them as new products, such as adsorbents. In this regard, the objective of this work was to develop an adsorbent using the raw activated sludge generated by the cellulose and paper industry. The activated cellulose sludge, after being dried, was chemically activated with 42.5% (v/v) phosphoric acid at 85 °C for 1 h and was charred at 500 °C, 600 °C and 700 °C for 2 h. The efficiency of the obtained adsorbent materials was evaluated using kinetic tests with methylene blue solutions. Using the adsorption kinetics, it was verified that the three adsorbents showed the capacity to adsorb dye, and the adsorbent obtained at a temperature of 600 °C showed the highest adsorption capacity of 107.1 mg g -1 . The kinetic model that best fit the experimental data was pseudo-second order. The Langmuir-Freudlich isotherm adequately described the experimental data. As a result, the cellulose sludge generated by the cellulose and paper industries could be used as an adsorbent. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. Functional residual capacity increase during laparoscopic surgery with abdominal wall lift

    Directory of Open Access Journals (Sweden)

    Hiroshi Ueda

    Full Text Available Abstract Background and objectives: The number of laparoscopic surgeries performed is increasing every year and in most cases the pneumoperitoneum method is used. One alternative is the abdominal wall lifting method and this study was undertaken to evaluate changes of functional residual capacity during the abdominal wall lift procedure. Methods: From January to April 2013, 20 patients underwent laparoscopic cholecystectomy at a single institution. All patients were anesthetized using propofol, remifentanil and rocuronium. FRC was measured automatically by Engstrom Carestation before the abdominal wall lift and again 15 minutes after the start of the procedure. Results: After abdominal wall lift, there was a significant increase in functional residual capacity values (before abdominal wall lift 1.48 × 103 mL, after abdominal wall lift 1.64 × 103 mL (p < 0.0001. No complications such as desaturation were observed in any patient during this study. Conclusions: Laparoscopic surgery with abdominal wall lift may be appropriate for patients who have risk factors such as obesity and respiratory disease.

  16. Residual attentional capacity amongst young and elderly during dual and triple task walking

    DEFF Research Database (Denmark)

    Læssøe, Uffe; Hoeck, Hans C.; Simonsen, Ole

    2008-01-01

    to the cognitive task the elderly increased their temporal stride-to-stride variability by 39% in the walking task and by 57% in the combined motor task. These increases were significantly larger than observed for the young. Equivalent decreases in trunk acceleration autocorrelation coefficients and gait speed...... in the study. The participants walked along a figure-of-eight track at a self-selected speed. The effect of introducing a concurrent cognitive task and a concurrent functional motor task was evaluated. Stride-to-stride variability was measured by heel contacts and by trunk accelerometry. In response...... were found. A combination of sufficiently challenging motor tasks and concurrent cognitive tasks can reveal signs of limited residual attentional capacity during walking amongst the elderly....

  17. Manual hyperinflation partly prevents reductions of functional residual capacity in cardiac surgical patients--a randomized controlled trial

    NARCIS (Netherlands)

    Paulus, Frederique; Veelo, Denise P.; de Nijs, Selma B.; Beenen, Ludo F. M.; Bresser, Paul; de Mol, Bas A. J. M.; Binnekade, Jan M.; Schultz, Marcus J.

    2011-01-01

    Cardiac surgery is associated with post-operative reductions of functional residual capacity (FRC). Manual hyperinflation (MH) aims to prevent airway plugging, and as such could prevent the reduction of FRC after surgery. The main purpose of this study was to determine the effect of MH on

  18. Influence of the inherent properties of drinking water treatment residuals on their phosphorus adsorption capacities.

    Science.gov (United States)

    Bai, Leilei; Wang, Changhui; He, Liansheng; Pei, Yuansheng

    2014-12-01

    Batch experiments were conducted to investigate the phosphorus (P) adsorption and desorption on five drinking water treatment residuals (WTRs) collected from different regions in China. The physical and chemical characteristics of the five WTRs were determined. Combined with rotated principal component analysis, multiple regression analysis was used to analyze the relationship between the inherent properties of the WTRs and their P adsorption capacities. The results showed that the maximum P adsorption capacities of the five WTRs calculated using the Langmuir isotherm ranged from 4.17 to 8.20mg/g at a pH of 7 and further increased with a decrease in pH. The statistical analysis revealed that a factor related to Al and 200 mmol/L oxalate-extractable Al (Alox) accounted for 36.5% of the variations in the P adsorption. A similar portion (28.5%) was attributed to an integrated factor related to the pH, Fe, 200 mmol/L oxalate-extractable Fe (Feox), surface area and organic matter (OM) of the WTRs. However, factors related to other properties (Ca, P and 5 mmol/L oxalate-extractable Fe and Al) were rejected. In addition, the quantity of P desorption was limited and had a significant negative correlation with the (Feox+Alox) of the WTRs (p<0.05). Overall, WTRs with high contents of Alox, Feox and OM as well as large surface areas were proposed to be the best choice for P adsorption in practical applications. Copyright © 2014. Published by Elsevier B.V.

  19. Enhancement of methylbenzene adsorption capacity through cetyl trimethyl ammonium bromide-modified activated carbon derived from Astragalus residue

    Science.gov (United States)

    Feng, Ningchuan; Zhang, Yumei; Fan, Wei; Zhu, Meilin

    2018-02-01

    Activated carbon was prepared from astragalus residue by KOH and then treated with cetyl trimethyl ammonium bromide (CTAB) and used for the removal of methylbenzene from aqueous solution. The samples were characterized by FTIR, XRD, SEM and Boehm titration. The results showed that CTAB changed the physicochemical properties of activated carbon significantly. The isotherm adsorption studies of methylbenzene onto the astragalus residue activated carbon (ASC) and CTAB-modified astragalus residue activated carbon (ASCCTAB) were examined by using batch techniques and agreed well with the Langmuir model. The maximum adsorption capacity of ASC and ASC-CTAB for methylbenzene determined from the Langmuir model was183.56 mg/g and 235.18 mg/g, respectively. The results indicated that using CTAB as a modifier for ASC modification could markedly enhance the methylbenzene removal from water.

  20. Nutrient removal capacity of wood residues for the Agro-environmental safety of ground and surface waters

    Directory of Open Access Journals (Sweden)

    Paulo A. Dumont

    2014-07-01

    Full Text Available The aim of this study was to determine the effectiveness of wood residues in the removal of nutrients (ammonium-N; NH4-N from nutrient-rich (NH4-N waters. The water holding capacity of the wood materials was also determined. Carried out at Rothamsted Research, North Wyke, UK, this controlled laboratory experiment tested two wood residues; in length, one being 1-2cm and the other from 150 µm (microns to 9.5mm. Although a wide range of studies have shown the effectiveness and performance of various absorbent materials as animal beddings, such as straw (cereal straw, woodchip (sawdust, bark or wood shavings, bracken and rushes, only few have focused on the NH4-N sorption/desorption capacity. The depuration capacity of wood residues from nutrient-rich effluents such as those from cattle bedded on woodchip or straw will be controlled by processes such as sorption (adsorption-absorption and desorption of nutrients. Studies have reported the nitrogen removal capacity of woodchip materials and biochar from woodchip as well as removal of NH4+-N from domestic and municipal wastewater, farm dirty water, landfill and industry effluents. These studies have observed that the mechanism of removal of nitrogen is by either increasing NO3--N removal form leachate by enhancing N2O losses via denitrification (biochar as carbon source for denitrifiers or by decreasing NH4+-N in leachate through adsorption to negatively charged sites. Results showed that although the cation exchange capacity (CEC and surface area (SA are both fundamental properties of adsorbent materials, no correlation was found with CEC and adsorption or desorption. Nor did changes in pH appear to be sufficiently important to cause changes in CEC. For this reason, osmotic pressure appeared to be a more predominant parameter controlling processes of adsorption and desorption of NH4+-N in both wood residues. Thus, wood residues high in NH4+-N should be avoided, as they could have an opposite effect

  1. Assessment of Potential Capacity Increases at Combined Heat and Power Facilities Based on Available Corn Stover and Forest Logging Residues

    Directory of Open Access Journals (Sweden)

    Donald L. Grebner

    2013-08-01

    Full Text Available Combined Heat and Power (CHP production using renewable energy sources is gaining importance because of its flexibility and high-energy efficiency. Biomass materials, such as corn stover and forestry residues, are potential sources for renewable energy for CHP production. In Mississippi, approximately 4.0 MT dry tons of woody biomass is available annually for energy production. In this study, we collected and analyzed 10 years of corn stover data (2001–2010 and three years of forest logging residue data (1995, 1999, and 2002 in each county in Mississippi to determine the potential of these feed stocks for sustainable CHP energy production. We identified six counties, namely Amite, Copiah, Clarke, Wayne, Wilkinson and Rankin, that have forest logging residue feedstocks to sustain a CHP facility with a range of capacity between 8.0 and 9.8 MW. Using corn stover alone, Yazoo and Washington counties can produce 13.4 MW and 13.5 MW of energy, respectively. Considering both feedstocks and based on a conservative amount of 30% available forest logging residue and 33% corn stover, we found that 20 counties have adequate supply for a CHP facility with a capacity of 8.3 MW to 19.6 MW.

  2. Residual gas analysis

    International Nuclear Information System (INIS)

    Berecz, I.

    1982-01-01

    Determination of the residual gas composition in vacuum systems by a special mass spectrometric method was presented. The quadrupole mass spectrometer (QMS) and its application in thin film technology was discussed. Results, partial pressure versus time curves as well as the line spectra of the residual gases in case of the vaporization of a Ti-Pd-Au alloy were demonstrated together with the possible construction schemes of QMS residual gas analysers. (Sz.J.)

  3. Agricultural pesticide residues

    International Nuclear Information System (INIS)

    Fuehr, F.

    1984-01-01

    The utilization of tracer techniques in the study of agricultural pesticide residues is reviewed under the following headings: lysimeter experiments, micro-ecosystems, translocation in soil, degradation of pesticides in soil, biological availability of soil-applied substances, bound residues in the soil, use of macro- and microautography, double and triple labelling, use of tracer labelling in animal experiments. (U.K.)

  4. Bioenergy from sisal residues

    Energy Technology Data Exchange (ETDEWEB)

    Jungersen, G. [Dansk Teknologisk Inst. (Denmark); Kivaisi, A.; Rubindamayugi, M. [Univ. of Dar es Salaam (Tanzania, United Republic of)

    1998-05-01

    The main objectives of this report are: To analyse the bioenergy potential of the Tanzanian agro-industries, with special emphasis on the Sisal industry, the largest producer of agro-industrial residues in Tanzania; and to upgrade the human capacity and research potential of the Applied Microbiology Unit at the University of Dar es Salaam, in order to ensure a scientific and technological support for future operation and implementation of biogas facilities and anaerobic water treatment systems. The experimental work on sisal residues contains the following issues: Optimal reactor set-up and performance; Pre-treatment methods for treatment of fibre fraction in order to increase the methane yield; Evaluation of the requirement for nutrient addition; Evaluation of the potential for bioethanol production from sisal bulbs. The processing of sisal leaves into dry fibres (decortication) has traditionally been done by the wet processing method, which consumes considerable quantities of water and produces large quantities of waste water. The Tanzania Sisal Authority (TSA) is now developing a dry decortication method, which consumes less water and produces a waste product with 12-15% TS, which is feasible for treatment in CSTR systems (Continously Stirred Tank Reactors). (EG)

  5. Handling of Solid Residues

    International Nuclear Information System (INIS)

    Medina Bermudez, Clara Ines

    1999-01-01

    The topic of solid residues is specifically of great interest and concern for the authorities, institutions and community that identify in them a true threat against the human health and the atmosphere in the related with the aesthetic deterioration of the urban centers and of the natural landscape; in the proliferation of vectorial transmitters of illnesses and the effect on the biodiversity. Inside the wide spectrum of topics that they keep relationship with the environmental protection, the inadequate handling of solid residues and residues dangerous squatter an important line in the definition of political and practical environmentally sustainable. The industrial development and the population's growth have originated a continuous increase in the production of solid residues; of equal it forms, their composition day after day is more heterogeneous. The base for the good handling includes the appropriate intervention of the different stages of an integral administration of residues, which include the separation in the source, the gathering, the handling, the use, treatment, final disposition and the institutional organization of the administration. The topic of the dangerous residues generates more expectation. These residues understand from those of pathogen type that are generated in the establishments of health that of hospital attention, until those of combustible, inflammable type, explosive, radio-active, volatile, corrosive, reagent or toxic, associated to numerous industrial processes, common in our countries in development

  6. Measurements of functional residual capacity during intensive care treatment: the technical aspects and its possible clinical applications.

    Science.gov (United States)

    Heinze, H; Eichler, W

    2009-10-01

    Direct measurement of lung volume, i.e. functional residual capacity (FRC) has been recommended for monitoring during mechanical ventilation. Mostly due to technical reasons, FRC measurements have not become a routine monitoring tool, but promising techniques have been presented. We performed a literature search of studies with the key words 'functional residual capacity' or 'end expiratory lung volume' and summarize the physiology and patho-physiology of FRC measurements in ventilated patients, describe the existing techniques for bedside measurement, and provide an overview of the clinical questions that can be addressed using an FRC assessment. The wash-in or wash-out of a tracer gas in a multiple breath maneuver seems to be best applicable at bedside, and promising techniques for nitrogen or oxygen wash-in/wash-out with reasonable accuracy and repeatability have been presented. Studies in ventilated patients demonstrate that FRC can easily be measured at bedside during various clinical settings, including positive end-expiratory pressure optimization, endotracheal suctioning, prone position, and the weaning from mechanical ventilation. Alveolar derecruitment can easily be monitored and improvements of FRC without changes of the ventilatory setting could indicate alveolar recruitment. FRC seems to be insensitive to over-inflation of already inflated alveoli. Growing evidence suggests that FRC measurements, in combination with other parameters such as arterial oxygenation and respiratory compliance, could provide important information on the pulmonary situation in critically ill patients. Further studies are needed to define the exact role of FRC in monitoring and perhaps guiding mechanical ventilation.

  7. [Residual neuromuscular blockade].

    Science.gov (United States)

    Fuchs-Buder, T; Schmartz, D

    2017-06-01

    Even small degrees of residual neuromuscular blockade, i. e. a train-of-four (TOF) ratio >0.6, may lead to clinically relevant consequences for the patient. Especially upper airway integrity and the ability to swallow may still be markedly impaired. Moreover, increasing evidence suggests that residual neuromuscular blockade may affect postoperative outcome of patients. The incidence of these small degrees of residual blockade is relatively high and may persist for more than 90 min after a single intubating dose of an intermediately acting neuromuscular blocking agent, such as rocuronium and atracurium. Both neuromuscular monitoring and pharmacological reversal are key elements for the prevention of postoperative residual blockade.

  8. TENORM: Wastewater Treatment Residuals

    Science.gov (United States)

    Water and wastes which have been discharged into municipal sewers are treated at wastewater treatment plants. These may contain trace amounts of both man-made and naturally occurring radionuclides which can accumulate in the treatment plant and residuals.

  9. Residuation in orthomodular lattices

    Directory of Open Access Journals (Sweden)

    Chajda Ivan

    2017-04-01

    Full Text Available We show that every idempotent weakly divisible residuated lattice satisfying the double negation law can be transformed into an orthomodular lattice. The converse holds if adjointness is replaced by conditional adjointness. Moreover, we show that every positive right residuated lattice satisfying the double negation law and two further simple identities can be converted into an orthomodular lattice. In this case, also the converse statement is true and the corresponence is nearly one-to-one.

  10. Characterization of Hospital Residuals

    International Nuclear Information System (INIS)

    Blanco Meza, A.; Bonilla Jimenez, S.

    1997-01-01

    The main objective of this investigation is the characterization of the solid residuals. A description of the handling of the liquid and gassy waste generated in hospitals is also given, identifying the source where they originate. To achieve the proposed objective the work was divided in three stages: The first one was the planning and the coordination with each hospital center, in this way, to determine the schedule of gathering of the waste can be possible. In the second stage a fieldwork was made; it consisted in gathering the quantitative and qualitative information of the general state of the handling of residuals. In the third and last stage, the information previously obtained was organized to express the results as the production rate per day by bed, generation of solid residuals for sampled services, type of solid residuals and density of the same ones. With the obtained results, approaches are settled down to either determine design parameters for final disposition whether for incineration, trituration, sanitary filler or recycling of some materials, and storage politics of the solid residuals that allow to determine the gathering frequency. The study concludes that it is necessary to improve the conditions of the residuals handling in some aspects, to provide the cleaning personnel of the equipment for gathering disposition and of security, minimum to carry out this work efficiently, and to maintain a control of all the dangerous waste, like sharp or polluted materials. In this way, an appreciable reduction is guaranteed in the impact on the atmosphere. (Author) [es

  11. Management of NORM Residues

    International Nuclear Information System (INIS)

    2013-06-01

    The IAEA attaches great importance to the dissemination of information that can assist Member States in the development, implementation, maintenance and continuous improvement of systems, programmes and activities that support the nuclear fuel cycle and nuclear applications, and that address the legacy of past practices and accidents. However, radioactive residues are found not only in nuclear fuel cycle activities, but also in a range of other industrial activities, including: - Mining and milling of metalliferous and non-metallic ores; - Production of non-nuclear fuels, including coal, oil and gas; - Extraction and purification of water (e.g. in the generation of geothermal energy, as drinking and industrial process water; in paper and pulp manufacturing processes); - Production of industrial minerals, including phosphate, clay and building materials; - Use of radionuclides, such as thorium, for properties other than their radioactivity. Naturally occurring radioactive material (NORM) may lead to exposures at some stage of these processes and in the use or reuse of products, residues or wastes. Several IAEA publications address NORM issues with a special focus on some of the more relevant industrial operations. This publication attempts to provide guidance on managing residues arising from different NORM type industries, and on pertinent residue management strategies and technologies, to help Member States gain perspectives on the management of NORM residues

  12. The Prognostic Value of Residual Volume/Total Lung Capacity in Patients with Chronic Obstructive Pulmonary Disease.

    Science.gov (United States)

    Shin, Tae Rim; Oh, Yeon-Mok; Park, Joo Hun; Lee, Keu Sung; Oh, Sunghee; Kang, Dae Ryoung; Sheen, Seungsoo; Seo, Joon Beom; Yoo, Kwang Ha; Lee, Ji-Hyun; Kim, Tae-Hyung; Lim, Seong Yong; Yoon, Ho Il; Rhee, Chin Kook; Choe, Kang-Hyeon; Lee, Jae Seung; Lee, Sang-Do

    2015-10-01

    The prognostic role of resting pulmonary hyperinflation as measured by residual volume (RV)/total lung capacity (TLC) in chronic obstructive pulmonary disease (COPD) remains poorly understood. Therefore, this study aimed to identify the factors related to resting pulmonary hyperinflation in COPD and to determine whether resting pulmonary hyperinflation is a prognostic factor in COPD. In total, 353 patients with COPD in the Korean Obstructive Lung Disease cohort recruited from 16 hospitals were enrolled. Resting pulmonary hyperinflation was defined as RV/TLC ≥ 40%. Multivariate logistic regression analysis demonstrated that older age (P = 0.001), lower forced expiratory volume in 1 second (FEV1) (P pulmonary hyperinflation in COPD. RV/TLC is an independent risk factor for all-cause mortality in COPD.

  13. Residual-stress measurements

    Energy Technology Data Exchange (ETDEWEB)

    Ezeilo, A.N.; Webster, G.A. [Imperial College, London (United Kingdom); Webster, P.J. [Salford Univ. (United Kingdom)

    1997-04-01

    Because neutrons can penetrate distances of up to 50 mm in most engineering materials, this makes them unique for establishing residual-stress distributions non-destructively. D1A is particularly suited for through-surface measurements as it does not suffer from instrumental surface aberrations commonly found on multidetector instruments, while D20 is best for fast internal-strain scanning. Two examples for residual-stress measurements in a shot-peened material, and in a weld are presented to demonstrate the attractive features of both instruments. (author).

  14. Composition of carbonization residues

    Energy Technology Data Exchange (ETDEWEB)

    Hupfer; Leonhardt

    1943-11-27

    This report compared the composition of samples from Wesseling and Leuna. In each case the sample was a residue from carbonization of the residues from hydrogenation of the brown coal processed at the plant. The composition was given in terms of volatile components, fixed carbon, ash, water, carbon, hydrogen, oxygen, nitrogen, volatile sulfur, and total sulfur. The result of carbonization was given in terms of (ash and) coke, tar, water, gas and losses, and bitumen. The composition of the ash was given in terms of silicon dioxide, ferric oxide, aluminum oxide, calcium oxide, magnesium oxide, potassium and sodium oxides, sulfur trioxide, phosphorus pentoxide, chlorine, and titanium oxide. The most important difference between the properties of the two samples was that the residue from Wesseling only contained 4% oil, whereas that from Leuna had about 26% oil. Taking into account the total amount of residue processed yearly, the report noted that better carbonization at Leuna could save 20,000 metric tons/year of oil. Some other comparisons of data included about 33% volatiles at Leuna vs. about 22% at Wesseling, about 5 1/2% sulfur at Leuna vs. about 6 1/2% at Leuna, but about 57% ash for both. Composition of the ash differed quite a bit between the two. 1 table.

  15. Designing with residual materials

    NARCIS (Netherlands)

    Walhout, W.; Wever, R.; Blom, E.; Addink-Dölle, L.; Tempelman, E.

    2013-01-01

    Many entrepreneurial businesses have attempted to create value based on the residual material streams of third parties. Based on ‘waste’ materials they designed products, around which they built their company. Such activities have the potential to yield sustainable products. Many of such companies

  16. Retention capacity of samarium (III) in zircon for it possible use in retaining walls for confinement of nuclear residues

    International Nuclear Information System (INIS)

    Garcia G, N.

    2006-01-01

    Mexico, as country that produces part of its electric power by nuclear means, should put special emphasis in the development of technologies guided to the sure and long term confinement of the high level nuclear residuals. This work studies the capacity that has the natural zircon to retain to the samarium (III) in solution, by what due, firstly, to characterize the zircon for technical instrumental to determine the purity and characteristic of the mineral in study. The instrumental techniques that were used to carry out the physicochemical characterization were the neutron activation analysis (NAA), the infrared spectroscopy (IS), the thermal gravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), semiquantitative analysis, dispersive energy spectroscopy (EDS), X-ray diffraction (XRD) and luminescence technique. The characterization of the surface properties carries out by means of the determination of the surface area using the BET multipoint technique, acidity constants, hydration time, the determination of the point of null charge (pH PCN ) and density of surface sites (D s ). The luminescence techniques were useful to determine the optimal point hydration of the zircon and for the quantification of the samarium, for that here intends the development of both analysis techniques. With the adjustment of the titration curves in the FITEQL 4 package the constants of surface acidity in the solid/liquid interface were determined. To the finish of this study it was corroborated that the zircon is a mineral that presents appropriate characteristics to be proposed as a contention barrier for the deep geologic confinement. With regard to the study of adsorption that one carries out the samarium retention it is superior to 90% under the described conditions. This investigation could also be applicable in the confinement of dangerous industrial residuals. (Author)

  17. Exercise Training Improves Exercise Capacity and Quality of Life in Patients with Inoperable or Residual Chronic Thromboembolic Pulmonary Hypertension

    Science.gov (United States)

    Herb, Jochen; Ehlken, Nicola; Fischer, Christine; Reichenberger, Frank; Rosenkranz, Stephan; Seyfarth, Hans-Juergen; Mayer, Eckhard

    2012-01-01

    Background Aim of this prospective study was to evaluate the effects of exercise training in patients with inoperable or residual chronic thromboembolic pulmonary hypertension (CTEPH). Methods Thirty-five consecutive patients with invasively confirmed inoperable or residual CTEPH (16 women;19 men; mean age 61±15 years, mean pulmonary artery pressure, 63±20 mmHg; primary inoperable n = 33, persisting pulmonary hypertension after pulmonary endarterectomy n = 2) on stable disease-targeted medication received exercise training in-hospital for 3 weeks and continued at home for 15 weeks. Medication remained unchanged during the study period. Efficacy parameters have been evaluated at baseline, after 3 and 15 weeks by blinded-observers. Survival rate has been evaluated in a follow-up period of median 36.4 months (interquartile range 26.6–46.6 months). Results All patients tolerated exercise training without severe adverse events. Patients significantly improved the mean distance walked in 6 minutes compared to baseline by 61±54 meters after 3 weeks (p<0.001) and by 71±70 meters after 15 weeks (p = 0.001), as well as scores of quality-of-life questionnaire, peak oxygen consumption and maximal workload. NT-proBNP improved significantly after 3 weeks of exercise training (p = 0.046). The 1-year survival rate was 97%, 2-year survival rate was 94% and the 3-year-survival 86% respectively. Conclusion Training as add-on to medical therapy may be effective in patients with CTEPH to improve work capacity, quality of life and further prognostic relevant parameters and possibly improves the 1-, 2- and 3-year survival rate. Further multicentric randomized controlled studies are needed to confirm these promising results. Trial Registration ClinicalTrials.gov NCT01398345 PMID:22848542

  18. Polder effects on sediment-to-soil conversion: water table, residual available water capacity, and salt stress interdependence.

    Science.gov (United States)

    Radimy, Raymond Tojo; Dudoignon, Patrick; Hillaireau, Jean Michel; Deboute, Elise

    2013-01-01

    The French Atlantic marshlands, reclaimed since the Middle Age, have been successively used for extensive grazing and more recently for cereal cultivation from 1970. The soils have acquired specific properties which have been induced by the successive reclaiming and drainage works and by the response of the clay dominant primary sediments, that is, structure, moisture, and salinity profiles. Based on the whole survey of the Marais Poitevin and Marais de Rochefort and in order to explain the mechanisms of marsh soil behavior, the work focuses on two typical spots: an undrained grassland since at least 1964 and a drained cereal cultivated field. The structure-hydromechanical profiles relationships have been established thanks to the clay matrix shrinkage curve. They are confronted to the hydraulic functioning including the fresh-to-salt water transfers and to the recording of tensiometer profiles. The CE1/5 profiles supply the water geochemical and geophysical data by their better accuracy. Associated to the available water capacity calculation they allow the representation of the parallel evolution of the residual available water capacity profiles and salinity profiles according to the plant growing and rooting from the mesophile systems of grassland to the hygrophile systems of drained fields.

  19. Geological Engineering Characteristics of the Residual Soil: Implementation for Soil Bearing Capacity at Gayungan, Surabaya, East Java

    Science.gov (United States)

    Rukmana, Y. Y.; Ridwan, M.

    2018-01-01

    This paper presents the results of soil investigation on the residual soil at Gayungan Surabaya. The methodology of the research consists of Drilling + Standard Penetration Test (ASTM D1586-99), sampling and laboratory test for index properties & mechanical of soil, then analyzed for Soil Bearing Capacity (Meyerhoff, 1976). Field test analysis data showed that Bore Hole.01(BH.01) and Bore Hole.03 (BH.03) were dominated by Sand / Sandy clay layer with Standart Penetration Test (SPT) values: 6-68, whereas in BH.02 was dominated by Clayey sand layer with Standard Penetration Test (SPT) values: 32-68. Based on Soil classification according to Unified Soil Classification System (USCS), the soil type at the research area consisted of ML (Silt with Low plasticity), CL ( Clay with low plasticity), MH (Silt with High plasticity), and SP (Sand with Poor gradation). Based on the borlog data and soil bearing capacity analysis of the research area is recommended: for The Deep foundation to reaches at least 16 meters depth with Qa = 1160.40-2032.80 kN / m2, and Shallow foundation reaches at least 1-2 meters deep with Qa = 718.25 kN / M2.

  20. Polder Effects on Sediment-to-Soil Conversion: Water Table, Residual Available Water Capacity, and Salt Stress Interdependence

    Directory of Open Access Journals (Sweden)

    Raymond Tojo Radimy

    2013-01-01

    Full Text Available The French Atlantic marshlands, reclaimed since the Middle Age, have been successively used for extensive grazing and more recently for cereal cultivation from 1970. The soils have acquired specific properties which have been induced by the successive reclaiming and drainage works and by the response of the clay dominant primary sediments, that is, structure, moisture, and salinity profiles. Based on the whole survey of the Marais Poitevin and Marais de Rochefort and in order to explain the mechanisms of marsh soil behavior, the work focuses on two typical spots: an undrained grassland since at least 1964 and a drained cereal cultivated field. The structure-hydromechanical profiles relationships have been established thanks to the clay matrix shrinkage curve. They are confronted to the hydraulic functioning including the fresh-to-salt water transfers and to the recording of tensiometer profiles. The CE1/5 profiles supply the water geochemical and geophysical data by their better accuracy. Associated to the available water capacity calculation they allow the representation of the parallel evolution of the residual available water capacity profiles and salinity profiles according to the plant growing and rooting from the mesophile systems of grassland to the hygrophile systems of drained fields.

  1. Neurophysiological Indicators of Residual Cognitive Capacity in the Minimally Conscious State

    Directory of Open Access Journals (Sweden)

    Solveig L. Hauger

    2015-01-01

    Full Text Available Background. The diagnostic usefulness of electrophysiological methods in assessing disorders of consciousness (DoC remains to be established on an individual patient level, and there is need to determine what constitutes robust experimental paradigm to elicit electrophysiological indices of covert cognitive capacity. Objectives. Two tasks encompassing active and passive conditions were explored in an event-related potentials (ERP study. The task robustness was studied in healthy controls, and their utility to detect covert signs of command-following on an individual patient level was investigated in patients in a minimally conscious state (MCS. Methods. Twenty healthy controls and 20 MCS patients participated. The active tasks included (1 listening for a change of pitch in the subject’s own name (SON and (2 counting SON, both contrasted to passive conditions. Midline ERPs are reported. Results. A larger P3 response was detected in the counting task compared to active listening to pitch change in the healthy controls. On an individual level, the counting task revealed a higher rate of responders among both healthy subjects and MCS patients. Conclusion. ERP paradigms involving actively counting SON represent a robust paradigm in probing for volitional cognition in minimally conscious patients and add important diagnostic information in some patients.

  2. Residual stresses in material processing

    Science.gov (United States)

    Kozaczek, K. J.; Watkins, T. R.; Hubbard, C. R.; Wang, Xun-Li; Spooner, S.

    Material manufacturing processes often introduce residual stresses into the product. The residual stresses affect the properties of the material and often are detrimental. Therefore, the distribution and magnitude of residual stresses in the final product are usually an important factor in manufacturing process optimization or component life prediction. The present paper briefly discusses the causes of residual stresses. It then addresses the direct, nondestructive methods of residual stress measurement by X ray and neutron diffraction. Examples are presented to demonstrate the importance of residual stress measurement in machining and joining operations.

  3. SRC Residual fuel oils

    Science.gov (United States)

    Tewari, Krishna C.; Foster, Edward P.

    1985-01-01

    Coal solids (SRC) and distillate oils are combined to afford single-phase blends of residual oils which have utility as fuel oils substitutes. The components are combined on the basis of their respective polarities, that is, on the basis of their heteroatom content, to assure complete solubilization of SRC. The resulting composition is a fuel oil blend which retains its stability and homogeneity over the long term.

  4. Composition of carbonization residues

    Energy Technology Data Exchange (ETDEWEB)

    Hupfer; Leonhardt

    1943-11-30

    This report gave a record of the composition of several samples of residues from carbonization of various hydrogenation residue from processing some type of coal or tar in the Bergius process. These included Silesian bituminous coal processed at 600 atm. with iron catalyst, in one case to produce gasoline and middle oil and in another case to produce heavy oil excess, Scholven coal processed at 250 atm. with tin oxalate and chlorine catalyst, Bruex tar processed in a 10-liter oven using iron catalyst, and a pitch mixture from Welheim processed in a 10-liter over using iron catalyst. The values gathered were compared with a few corresponding values estimated for Boehlen tar and Gelsenberg coal based on several assumptions outlined in the report. The data recorded included percentage of ash in the dry residue and percentage of carbon, hydrogen, oxygen, nitrogen, chlorine, total sulfur, and volatile sulfur. The percentage of ash varied from 21.43% in the case of Bruex tar to 53.15% in the case of one of the Silesian coals. Percentage of carbon varied from 44.0% in the case of Scholven coal to 78.03% in the case of Bruex tar. Percentage of total sulfur varied from 2.28% for Bruex tar to a recorded 5.65% for one of the Silesian coals and an estimated 6% for Boehlen tar. 1 table.

  5. Phosphorus Sorption Capacity of Concrete Waste, Natural Sorbents, Alum Residuals from Water Supply Sludge, and Ceramic Material for Tertiary Treatment in Onsite Systems

    Directory of Open Access Journals (Sweden)

    Siriporn Larpkiattaworn

    2013-01-01

    Full Text Available The phosphorus (P sorption capacity was determined for concrete waste, alum residuals from water treatment sludge, and natural sorbents (shells, clay, kaolin, and mordenite from various parts of Thailand. The material showing the best P sorption capacity (shells was selected for preparing a ceramic material to support the growth of nitrifying bacteria. The ceramic material, consisting of shells (50% by weight, alum residuals sludge (40% by weight and a soil (10% by weight heat at 750°C for about one hour, was studied for its P sorption capacity. Langmuir and Freundlich sorption isotherms yielded similar relative maximum P sorption capacities for the sorbents. The results from the Langmuir calculations showed the following maximum P sorption capacities: 32.26 g P/Kg shells, 31.25 g P/Kg concrete waste, 7.19 g P/Kg alum residuals sludge, 290 mg P/Kg clay, 80 mg P/Kg kaolin, and 30 mg P/Kg mordenite. The P sorption capacity for the prepared ceramic material at grain size 12 mm was 4.85 g P/kg. This result suggests that the ceramic material could be used for P sorption while providing growth support for nitrifying bacteria, similar to the well documented a popular P sorption material: light expanded clay aggregate (LECA from Sweden.

  6. Quadratic residues and non-residues selected topics

    CERN Document Server

    Wright, Steve

    2016-01-01

    This book offers an account of the classical theory of quadratic residues and non-residues with the goal of using that theory as a lens through which to view the development of some of the fundamental methods employed in modern elementary, algebraic, and analytic number theory. The first three chapters present some basic facts and the history of quadratic residues and non-residues and discuss various proofs of the Law of Quadratic Reciprosity in depth, with an emphasis on the six proofs that Gauss published. The remaining seven chapters explore some interesting applications of the Law of Quadratic Reciprocity, prove some results concerning the distribution and arithmetic structure of quadratic residues and non-residues, provide a detailed proof of Dirichlet’s Class-Number Formula, and discuss the question of whether quadratic residues are randomly distributed. The text is a valuable resource for graduate and advanced undergraduate students as well as for mathematicians interested in number theory.

  7. Sharing Residual Liability

    DEFF Research Database (Denmark)

    Carbonara, Emanuela; Guerra, Alice; Parisi, Francesco

    2016-01-01

    Economic models of tort law evaluate the efficiency of liability rules in terms of care and activity levels. A liability regime is optimal when it creates incentives to maximize the value of risky activities net of accident and precaution costs. The allocation of primary and residual liability...... the virtues and limits of loss-sharing rules in generating optimal (second-best) incentives and allocations of risk. We find that loss sharing may be optimal in the presence of countervailing policy objectives, homogeneous risk avoiders, and subadditive risk, which potentially offers a valuable tool...

  8. Impact of changes of positive end-expiratory pressure on functional residual capacity at low tidal volume ventilation during general anesthesia

    OpenAIRE

    Satoh, Daizoh; Kurosawa, Shin; Kirino, Wakaba; Wagatsuma, Toshihiro; Ejima, Yutaka; Yoshida, Akiko; Toyama, Hiroaki; Nagaya, Kei

    2012-01-01

    Purpose Several reports in the literature have described the effects of positive end-expiratory pressure (PEEP) level upon functional residual capacity (FRC) in ventilated patients during general anesthesia. This study compares FRC in mechanically low tidal volume ventilation with different PEEP levels during upper abdominal surgery. Methods Before induction of anesthesia (awake) for nine patients with upper abdominal surgery, a tight-seal facemask was applied with 2 cmH2O pressure support ve...

  9. Marine Tar Residues: a Review

    OpenAIRE

    Warnock, April M.; Hagen, Scott C.; Passeri, Davina L.

    2015-01-01

    Marine tar residues originate from natural and anthropogenic oil releases into the ocean environment and are formed after liquid petroleum is transformed by weathering, sedimentation, and other processes. Tar balls, tar mats, and tar patties are common examples of marine tar residues and can range in size from millimeters in diameter (tar balls) to several meters in length and width (tar mats). These residues can remain in the ocean environment indefinitely, decomposing or becoming buried in ...

  10. Evaluation of residue-residue contact predictions in CASP9

    KAUST Repository

    Monastyrskyy, Bohdan

    2011-01-01

    This work presents the results of the assessment of the intramolecular residue-residue contact predictions submitted to CASP9. The methodology for the assessment does not differ from that used in previous CASPs, with two basic evaluation measures being the precision in recognizing contacts and the difference between the distribution of distances in the subset of predicted contact pairs versus all pairs of residues in the structure. The emphasis is placed on the prediction of long-range contacts (i.e., contacts between residues separated by at least 24 residues along sequence) in target proteins that cannot be easily modeled by homology. Although there is considerable activity in the field, the current analysis reports no discernable progress since CASP8.

  11. Triceps Brachii in Incomplete Tetraplegia: EMG and Dynamometer Evaluation of Residual Motor Resources and Capacity for Strengthening

    Science.gov (United States)

    2013-01-01

    Background: Candidates for activity-based therapy after spinal cord injury (SCI) are often selected on the basis of manual muscle test scores and the classification of the injury as complete or incomplete. However, these scores may not adequately predict which individuals have sufficient residual motor resources for the therapy to be beneficial. Objective: We performed a preliminary study to see whether dynamometry and quantitative electromyography (EMG) can provide a more detailed assessment of residual motor resources. Methods: We measured elbow extension strength using a hand-held dynamometer and recorded fine-wire EMG from the triceps brachii muscles of 4 individuals with C5, C6, or C7 level SCI and 2 able-bodied controls. We used EMG decomposition to measure motor unit action potential (MUAP) amplitudes and motor unit (MU) recruitment and firing-rate profiles during constant and ramp contractions. Results: All 4 subjects with cervical SCI (cSCI) had increased MUAP amplitudes indicative of denervation. Two of the subjects with cSCI had very weak elbow extension strength (40 pps), suggesting profound loss of motoneurons. The other 2 subjects with cSCI had stronger elbow extension (>6 kg), more normal recruitment, and more normal firing rates, suggesting a substantial remaining motoneuron population. Conclusions: Dynamometry and quantitative EMG may provide information about the extent of gray matter loss in cSCI to help guide rehabilitation strategies. PMID:24244095

  12. Landfilling of waste incineration residues

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund; Astrup, Thomas; Cai, Zuansi

    2002-01-01

    Residues from waste incineration are bottom ashes and air-pollution-control (APC) residues including fly ashes. The leaching of heavy metals and salts from the ashes is substantial and a wide spectrum of leaching tests and corresponding criteria have been introduced to regulate the landfilling...

  13. Statistical inference on residual life

    CERN Document Server

    Jeong, Jong-Hyeon

    2014-01-01

    This is a monograph on the concept of residual life, which is an alternative summary measure of time-to-event data, or survival data. The mean residual life has been used for many years under the name of life expectancy, so it is a natural concept for summarizing survival or reliability data. It is also more interpretable than the popular hazard function, especially for communications between patients and physicians regarding the efficacy of a new drug in the medical field. This book reviews existing statistical methods to infer the residual life distribution. The review and comparison includes existing inference methods for mean and median, or quantile, residual life analysis through medical data examples. The concept of the residual life is also extended to competing risks analysis. The targeted audience includes biostatisticians, graduate students, and PhD (bio)statisticians. Knowledge in survival analysis at an introductory graduate level is advisable prior to reading this book.

  14. Automatic prediction of catalytic residues by modeling residue structural neighborhood

    Directory of Open Access Journals (Sweden)

    Passerini Andrea

    2010-03-01

    Full Text Available Abstract Background Prediction of catalytic residues is a major step in characterizing the function of enzymes. In its simpler formulation, the problem can be cast into a binary classification task at the residue level, by predicting whether the residue is directly involved in the catalytic process. The task is quite hard also when structural information is available, due to the rather wide range of roles a functional residue can play and to the large imbalance between the number of catalytic and non-catalytic residues. Results We developed an effective representation of structural information by modeling spherical regions around candidate residues, and extracting statistics on the properties of their content such as physico-chemical properties, atomic density, flexibility, presence of water molecules. We trained an SVM classifier combining our features with sequence-based information and previously developed 3D features, and compared its performance with the most recent state-of-the-art approaches on different benchmark datasets. We further analyzed the discriminant power of the information provided by the presence of heterogens in the residue neighborhood. Conclusions Our structure-based method achieves consistent improvements on all tested datasets over both sequence-based and structure-based state-of-the-art approaches. Structural neighborhood information is shown to be responsible for such results, and predicting the presence of nearby heterogens seems to be a promising direction for further improvements.

  15. Biodegradation of some agricultural residues by fungi in agitated ...

    African Journals Online (AJOL)

    Digestibility of agricultural residues in animal feeding is deeply dependent on the amounts and types of their fibers. Biological treatment of agricultural residues is a new method for improvement of digestibility. Therefore, the capacity of a few fungi in biodegradation of some agricultural residues was studied. Losses of crude ...

  16. Trends and advances in pesticide residue analysis | Yeboah ...

    African Journals Online (AJOL)

    The nature, origin and the economic significance of pesticide residues are reviewed to underscore the need for countries to develop the ability and capacity to monitor pesticide residues. An overview of pesticide residues analytical procedures is also presented with emphasis on thin layer chromatography (TLC) as an ...

  17. Residual stress by repair welds

    International Nuclear Information System (INIS)

    Mochizuki, Masahito; Toyoda, Masao

    2003-01-01

    Residual stress by repair welds is computed using the thermal elastic-plastic analysis with phase-transformation effect. Coupling phenomena of temperature, microstructure, and stress-strain fields are simulated in the finite-element analysis. Weld bond of a plate butt-welded joint is gouged and then deposited by weld metal in repair process. Heat source is synchronously moved with the deposition of the finite-element as the weld deposition. Microstructure is considered by using CCT diagram and the transformation behavior in the repair weld is also simulated. The effects of initial stress, heat input, and weld length on residual stress distribution are studied from the organic results of numerical analysis. Initial residual stress before repair weld has no influence on the residual stress after repair treatment near weld metal, because the initial stress near weld metal releases due to high temperature of repair weld and then stress by repair weld regenerates. Heat input has an effect for residual stress distribution, for not its magnitude but distribution zone. Weld length should be considered reducing the magnitude of residual stress in the edge of weld bead; short bead induces high tensile residual stress. (author)

  18. RESIDUAL RISK ASSESSMENT: ETHYLENE OXIDE ...

    Science.gov (United States)

    This document describes the residual risk assessment for the Ethylene Oxide Commercial Sterilization source category. For stationary sources, section 112 (f) of the Clean Air Act requires EPA to assess risks to human health and the environment following implementation of technology-based control standards. If these technology-based control standards do not provide an ample margin of safety, then EPA is required to promulgate addtional standards. This document describes the methodology and results of the residual risk assessment performed for the Ethylene Oxide Commercial Sterilization source category. The results of this analyiss will assist EPA in determining whether a residual risk rule for this source category is appropriate.

  19. Nitrogen availability of biogas residues

    Energy Technology Data Exchange (ETDEWEB)

    El-Sayed Fouda, Sara

    2011-09-07

    The objectives of this study were to characterize biogas residues either unseparated or separated into a liquid and a solid phase from the fermentation of different substrates with respect to their N and C content. In addition, short and long term effects of the application of these biogas residues on the N availability and N utilization by ryegrass was investigated. It is concluded that unseparated or liquid separated biogas residues provide N at least corresponding to their ammonium content and that after the first fertilizer application the C{sub org}:N{sub org} ratio of the biogas residues was a crucial factor for the N availability. After long term application, the organic N accumulated in the soil leads to an increased release of N.

  20. Residual stress analysis: a review

    International Nuclear Information System (INIS)

    Finlayson, T.R.

    1983-01-01

    The techniques which are or could be employed to measure residual stresses are outlined. They include X-ray and neutron diffraction. Comments are made on the reliability and accuracy to be expected from particular techniques

  1. OECD Maximum Residue Limit Calculator

    Science.gov (United States)

    With the goal of harmonizing the calculation of maximum residue limits (MRLs) across the Organisation for Economic Cooperation and Development, the OECD has developed an MRL Calculator. View the calculator.

  2. Vesícula residual

    Directory of Open Access Journals (Sweden)

    Júlio C. U. Coelho

    Full Text Available Our objective is to report three patients with recurrent severe upper abdominal pain secondary to residual gallbladder. All patients had been subjected to cholecystectomy from 1 to 20 years before. The diagnosis was established after several episodes of severe upper abdominal pain by imaging exams: ultrasonography, tomography, or endoscopic retrograde cholangiography. Removal of the residual gallbladder led to complete resolution of symptoms. Partial removal of the gallbladder is a very rare cause of postcholecystectomy symptoms.

  3. Marine Tar Residues: a Review.

    Science.gov (United States)

    Warnock, April M; Hagen, Scott C; Passeri, Davina L

    Marine tar residues originate from natural and anthropogenic oil releases into the ocean environment and are formed after liquid petroleum is transformed by weathering, sedimentation, and other processes. Tar balls, tar mats, and tar patties are common examples of marine tar residues and can range in size from millimeters in diameter (tar balls) to several meters in length and width (tar mats). These residues can remain in the ocean environment indefinitely, decomposing or becoming buried in the sea floor. However, in many cases, they are transported ashore via currents and waves where they pose a concern to coastal recreation activities, the seafood industry and may have negative effects on wildlife. This review summarizes the current state of knowledge on marine tar residue formation, transport, degradation, and distribution. Methods of detection and removal of marine tar residues and their possible ecological effects are discussed, in addition to topics of marine tar research that warrant further investigation. Emphasis is placed on benthic tar residues, with a focus on the remnants of the Deepwater Horizon oil spill in particular, which are still affecting the northern Gulf of Mexico shores years after the leaking submarine well was capped.

  4. Evaluation of residue-residue contact prediction in CASP10

    KAUST Repository

    Monastyrskyy, Bohdan

    2013-08-31

    We present the results of the assessment of the intramolecular residue-residue contact predictions from 26 prediction groups participating in the 10th round of the CASP experiment. The most recently developed direct coupling analysis methods did not take part in the experiment likely because they require a very deep sequence alignment not available for any of the 114 CASP10 targets. The performance of contact prediction methods was evaluated with the measures used in previous CASPs (i.e., prediction accuracy and the difference between the distribution of the predicted contacts and that of all pairs of residues in the target protein), as well as new measures, such as the Matthews correlation coefficient, the area under the precision-recall curve and the ranks of the first correctly and incorrectly predicted contact. We also evaluated the ability to detect interdomain contacts and tested whether the difficulty of predicting contacts depends upon the protein length and the depth of the family sequence alignment. The analyses were carried out on the target domains for which structural homologs did not exist or were difficult to identify. The evaluation was performed for all types of contacts (short, medium, and long-range), with emphasis placed on long-range contacts, i.e. those involving residues separated by at least 24 residues along the sequence. The assessment suggests that the best CASP10 contact prediction methods perform at approximately the same level, and comparably to those participating in CASP9.

  5. Residual stresses around Vickers indents

    International Nuclear Information System (INIS)

    Pajares, A.; Guiberteau, F.; Steinbrech, R.W.

    1995-01-01

    The residual stresses generated by Vickers indentation in brittle materials and their changes due to annealing and surface removal were studied in 4 mol% yttria partially stabilized zirconia (4Y-PSZ). Three experimental methods to gain information about the residual stress field were applied: (i) crack profile measurements based on serial sectioning, (ii) controlled crack propagation in post indentation bending tests and (iii) double indentation tests with smaller secondary indents located around a larger primary impression. Three zones of different residual stress behavior are deduced from the experiments. Beneath the impression a crack free spherical zone of high hydrostatic stresses exists. This core zone is followed by a transition regime where indentation cracks develop but still experience hydrostatic stresses. Finally, in an outward third zone, the crack contour is entirely governed by the tensile residual stress intensity (elastically deformed region). Annealing and surface removal reduce this crack driving stress intensity. The specific changes of the residual stresses due to the post indentation treatments are described and discussed in detail for the three zones

  6. Actinide recovery from pyrochemical residues

    International Nuclear Information System (INIS)

    Avens, L.R.; Clifton, D.G.; Vigil, A.R.

    1984-01-01

    A new process for recovery of plutonium and americium from pyrochemical waste has been demonstrated. It is based on chloride solution anion exchange at low acidity, which eliminates corrosive HCl fumes. Developmental experiments of the process flowsheet concentrated on molten salt extraction (MSE) residues and gave >95% plutonium and >90% americium recovery. The recovered plutonium contained 6 = from high chloride-low acid solution. Americium and other metals are washed from the ion exchange column with 1N HNO 3 -4.8M NaCl. The plutonium is recovered, after elution, via hydroxide precipitation, while the americium is recovered via NaHCO 3 precipitation. All filtrates from the process are discardable as low-level contaminated waste. Production-scale experiments are now in progress for MSE residues. Flow sheets for actinide recovery from electrorefining and direct oxide reduction residues are presented and discussed

  7. Actinide recovery from pyrochemical residues

    International Nuclear Information System (INIS)

    Avens, L.R.; Clifton, D.G.; Vigil, A.R.

    1985-05-01

    We demonstrated a new process for recovering plutonium and americium from pyrochemical waste. The method is based on chloride solution anion exchange at low acidity, or acidity that eliminates corrosive HCl fumes. Developmental experiments of the process flow chart concentrated on molten salt extraction (MSE) residues and gave >95% plutonium and >90% americium recovery. The recovered plutonium contained 6 2- from high-chloride low-acid solution. Americium and other metals are washed from the ion exchange column with lN HNO 3 -4.8M NaCl. After elution, plutonium is recovered by hydroxide precipitation, and americium is recovered by NaHCO 3 precipitation. All filtrates from the process can be discardable as low-level contaminated waste. Production-scale experiments are in progress for MSE residues. Flow charts for actinide recovery from electro-refining and direct oxide reduction residues are presented and discussed

  8. Alternatives to crop residues for soil amendment

    OpenAIRE

    Powell, J.M.; Unger, P.W.

    1997-01-01

    Metadata only record In semiarid agroecosystems, crop residues can provide important benefits of soil and water conservation, nutrient cycling, and improved subsequent crop yields. However, there are frequently multiple competing uses for residues, including animal forage, fuel, and construction material. This chapter discusses the various uses of crop residues and examines alternative soil amendments when crop residues cannot be left on the soil.

  9. Leaching From Biomass Gasification Residues

    DEFF Research Database (Denmark)

    Allegrini, Elisa; Boldrin, Alessio; Polletini, A.

    2011-01-01

    The aim of the present work is to attain an overall characterization of solid residues from biomass gasification. Besides the determination of chemical and physical properties, the work was focused on the study of leaching behaviour. Compliance and pH-dependence leaching tests coupled with geoche......The aim of the present work is to attain an overall characterization of solid residues from biomass gasification. Besides the determination of chemical and physical properties, the work was focused on the study of leaching behaviour. Compliance and pH-dependence leaching tests coupled...

  10. Carbaryl residues in maize products

    International Nuclear Information System (INIS)

    Zayed, S.M.A.D.; Mansour, S.A.; Mostafa, I.Y.; Hassan, A.

    1976-01-01

    The 14 C-labelled insecticide carbaryl was synthesized from [1- 14 C]-1-naphthol at a specific activity of 3.18mCig -1 . Maize plants were treated with the labelled insecticide under simulated conditions of agricultural practice. Mature plants were harvested and studied for distribution of total residues in untreated grains as popularly roasted and consumed, and in the corn oil and corn germ products. Total residues found under these conditions in the respective products were 0.2, 0.1, 0.45 and 0.16ppm. (author)

  11. Combinatorial construction of toric residues

    OpenAIRE

    Khetan, Amit; Soprounov, Ivan

    2004-01-01

    The toric residue is a map depending on n+1 semi-ample divisors on a complete toric variety of dimension n. It appears in a variety of contexts such as sparse polynomial systems, mirror symmetry, and GKZ hypergeometric functions. In this paper we investigate the problem of finding an explicit element whose toric residue is equal to one. Such an element is shown to exist if and only if the associated polytopes are essential. We reduce the problem to finding a collection of partitions of the la...

  12. Weld Residual Stress in Corner Boxing Joints

    OpenAIRE

    Kazuyoshi, Matsuoka; Tokuharu, Yoshii; Ship Research Institute, Ministry of Transport; Ship Research Institute, Ministry of Transport

    1998-01-01

    Fatigue damage often occurs in corner boxing welded joints because of stress concentration and residual stress. The hot spot stress approach is applicable to stress concentration. However, the number of suitable methods for estimating residual stress in welded joints is limited. The purpose of this paper is to clarify the residual stress in corner boxing joints. The method of estimating residual stresses based on the inherent stress technique is presented. Residual stress measurements are per...

  13. The effect of low-NOx combustion on residual carbon in fly ash and its adsorption capacity for air entrainment admixtures in concrete

    DEFF Research Database (Denmark)

    Pedersen, Kim Hougaard; Jensen, Anker Degn; Dam-Johansen, Kim

    2010-01-01

    Fly ash from pulverized coal combustion contains residual carbon that can adsorb the air-entraining admixtures (AEAs) added to control the air entrainment in concrete. This is a problem that has increased by the implementation of low-NOx combustion technologies. In this work, pulverized fuel has...... by up to a factor of 25. This was due to a lower carbon content in the ash and a lower specific AEA adsorptivity of the carbon. The latter was suggested to be caused by changes in the adsorption properties of the unburned char and a decreased formation of soot, which was found to have a large AEA...... adsorption capacity based on measurements on a carbon black. The NOx formation increased by up to three times with more oxidizing conditions and thus, there was a trade-off between the AEA requirements of the ash and NOx formation. The type of fuel had high impact on the AEA adsorption behavior of the ash...

  14. Solidification process for sludge residue

    International Nuclear Information System (INIS)

    Pearce, K.L.

    1998-01-01

    This report investigates the solidification process used at 100-N Basin to solidify the N Basin sediment and assesses the N Basin process for application to the K Basin sludge residue material. This report also includes a discussion of a solidification process for stabilizing filters. The solidified matrix must be compatible with the Environmental Remediation Disposal Facility acceptance criteria

  15. Machine Arithmetic in Residual Classes,

    Science.gov (United States)

    1981-04-03

    rsmainder/residue, as this ascape /-nsues from thp determination of system. It can be. zaalizpd ;n the presence of th- arithmetic urit, which wor~s in thz sys...modules Nj. Page 417. Proof. Proof ascaps /ensues directly from the theorem of Gauss. Actually/really, since according to condition (py, qj)-=-. then

  16. Residual stress in polyethylene pipes

    Czech Academy of Sciences Publication Activity Database

    Poduška, Jan; Hutař, Pavel; Kučera, J.; Frank, A.; Sadílek, J.; Pinter, G.; Náhlík, Luboš

    2016-01-01

    Roč. 54, SEP (2016), s. 288-295 ISSN 0142-9418 R&D Projects: GA MŠk LM2015069; GA MŠk(CZ) LQ1601 Institutional support: RVO:68081723 Keywords : polyethylene pipe * residual stress * ring slitting method * lifetime estimation Subject RIV: JL - Materials Fatigue, Friction Mechanics Impact factor: 2.464, year: 2016

  17. Managing woodwaste: Yield from residue

    Energy Technology Data Exchange (ETDEWEB)

    Nielson, E. [LNS Services, Inc., North Vancouver, British Columbia (Canada); Rayner, S. [Pacific Waste Energy Inc., Burnaby, British Columbia (Canada)

    1993-12-31

    Historically, the majority of sawmill waste has been burned or buried for the sole purpose of disposal. In most jurisdictions, environmental legislation will prohibit, or render uneconomic, these practices. Many reports have been prepared to describe the forest industry`s residue and its environmental effect; although these help those looking for industry-wide or regional solutions, such as electricity generation, they have limited value for the mill manager, who has the on-hands responsibility for generation and disposal of the waste. If the mill manager can evaluate waste streams and break them down into their usable components, he can find niche market solutions for portions of the plant residue and redirect waste to poor/no-return, rather than disposal-cost, end uses. In the modern mill, residue is collected at the individual machine centre by waste conveyors that combine and mix sawdust, shavings, bark, etc. and send the result to the hog-fuel pile. The mill waste system should be analyzed to determine the measures that can improve the quality of residues and determine the volumes of any particular category before the mixing, mentioned above, occurs. After this analysis, the mill may find a niche market for a portion of its woodwaste.

  18. Leptogenesis and residual CP symmetry

    International Nuclear Information System (INIS)

    Chen, Peng; Ding, Gui-Jun; King, Stephen F.

    2016-01-01

    We discuss flavour dependent leptogenesis in the framework of lepton flavour models based on discrete flavour and CP symmetries applied to the type-I seesaw model. Working in the flavour basis, we analyse the case of two general residual CP symmetries in the neutrino sector, which corresponds to all possible semi-direct models based on a preserved Z 2 in the neutrino sector, together with a CP symmetry, which constrains the PMNS matrix up to a single free parameter which may be fixed by the reactor angle. We systematically study and classify this case for all possible residual CP symmetries, and show that the R-matrix is tightly constrained up to a single free parameter, with only certain forms being consistent with successful leptogenesis, leading to possible connections between leptogenesis and PMNS parameters. The formalism is completely general in the sense that the two residual CP symmetries could result from any high energy discrete flavour theory which respects any CP symmetry. As a simple example, we apply the formalism to a high energy S 4 flavour symmetry with a generalized CP symmetry, broken to two residual CP symmetries in the neutrino sector, recovering familiar results for PMNS predictions, together with new results for flavour dependent leptogenesis.

  19. Solow Residuals Without Capital Stocks

    DEFF Research Database (Denmark)

    Burda, Michael C.; Severgnini, Battista

    2014-01-01

    We use synthetic data generated by a prototypical stochastic growth model to assess the accuracy of the Solow residual (Solow, 1957) as a measure of total factor productivity (TFP) growth when the capital stock in use is measured with error. We propose two alternative measurements based on current...

  20. Research on the fiber reflecting sensor for detecting the residual capacity of the lead-acid battery

    Science.gov (United States)

    Zhao, Mingfu; Zhong, Nianbing; Chen, Yan; Luo, Yuwei

    2006-11-01

    According to the Lambert-Bee law, we can see that the photic absorption coefficient is related to the matter's concentration, the distance of the light through the absorption medium and the transmitted light intensity. The paper just according to the physical phenomena and the theory make the reflex energy relate to the concentration testing of the electrolyte, at the same time the electrolyte's concentration is related to the capacity of lead-acid battery on a corresponding function relation, so we can know the capacity state of the lead-acid battery according to the measurement on the electrolyte's concentration. According to the experiment and research the author deeply discussed how the temperature change affects the capacity of lead-acid battery and the concentration's changing relation, according to the analyses of the thermo-optic effect, we made a new reflecting fiber sensor based on the comparative temperature testing theory and absorption which can eliminate the temperature effect on the tested signal namely the output signal just related to the concentration, so really reflects the change of the capacity of the lead-acid battery when it is in the charge and discharge process. The results of the experiment and theory analyses show that this method is easy to realize the online testing of the capacity of lead-acid battery. This sensor has many merits such as precise measurement, sensitive reaction, long-life use etc. It can be widely used in the electric capacity testing of the automobile lead-acid battery, the electric capacity testing of the industry lead-acid battery, liquor's concentration testing and salinity testing of the sea and have a bright future.

  1. Radioactive material in residues of health services residues

    International Nuclear Information System (INIS)

    Costa R, A. Jr.; Recio, J.C.

    2006-01-01

    The work presents the operational actions developed by the one organ responsible regulator for the control of the material use radioactive in Brazil. Starting from the appearance of coming radioactive material of hospitals and clinical with services of nuclear medicine, material that that is picked up and transported in specific trucks for the gathering of residuals of hospital origin, and guided one it manufactures of treatment of residuals of services of health, where they suffer radiological monitoring before to guide them for final deposition in sanitary embankment, in the city of Sao Paulo, Brazil. The appearance of this radioactive material exposes a possible one violation of the norms that govern the procedures and practices in that sector in the country. (Author)

  2. Pesticide residues in birds and mammals

    Science.gov (United States)

    Stickel, L.F.; Edwards, C.A.

    1973-01-01

    SUMMARY: Residues of organochlorine pesticides and their breakdown products are present in the tissues of essentially all wild birds throughout the world. These chemicals accumulate in fat from a relatively small environmental exposure. DDE and dieldrin are most prevalent. Others, such as heptachlor epoxide, chlordane, endrin, and benzene hexachloride also occur, the quantities and kinds generally reflecting local or regional use. Accumulation may be sufficient to kill animals following applications for pest control. This has occurred in several large-scale programmes in the United States. Mortality has also resulted from unintentional leakage of chemical from commercial establishments. Residues may persist in the environment for many years, exposing successive generations of animals. In general, birds that eat other birds, or fish, have higher residues than those that eat seeds and vegetation. The kinetic processes of absorption, metabolism, storage, and output differ according to both kind of chemical and species of animal. When exposure is low and continuous, a balance between intake and excretion may be achieved. Residues reach a balance at an approximate animal body equilibrium or plateau; the storage is generally proportional to dose. Experiments with chickens show that dieldrin and heptachlor epoxide have the greatest propensity for storage, endrin next, then DDT, then lindane. The storage of DDT was complicated by its metabolism to DDE and DDD, but other studies show that DDE has a much greater propensity for storage than either DDD or DDT. Methoxychlor has little cumulative capacity in birds. Residues in eggs reflect and parallel those in the parent bird during accumulation, equilibrium, and decline when dosage is discontinued. Residues with the greatest propensity for storage are also lost most slowly. Rate of loss of residues can be modified by dietary components and is speeded by weight loss of the animal. Under sublethal conditions of continuous

  3. RECOVERY OF WHEAT RESIDUE NITROGEN 15 AND RESIDUAL ...

    African Journals Online (AJOL)

    Therefore 85 kg ha-1 N as labelled ammonium sulfate (9.764% atomic excess) was applied in a three-split application. Fertiliser N recovery by wheat in the first year was 33.1%. At harvest, 64.8% of fertiliser N was found in the 0 - 80 cm profile as residual fertiliser-derived N; 2.1% of the applied N could not be accounted for ...

  4. The Cauchy method of residues

    CERN Document Server

    Mitrinović, Dragoslav S

    1993-01-01

    Volume 1, i. e. the monograph The Cauchy Method of Residues - Theory and Applications published by D. Reidel Publishing Company in 1984 is the only book that covers all known applications of the calculus of residues. They range from the theory of equations, theory of numbers, matrix analysis, evaluation of real definite integrals, summation of finite and infinite series, expansions of functions into infinite series and products, ordinary and partial differential equations, mathematical and theoretical physics, to the calculus of finite differences and difference equations. The appearance of Volume 1 was acknowledged by the mathematical community. Favourable reviews and many private communications encouraged the authors to continue their work, the result being the present book, Volume 2, a sequel to Volume 1. We mention that Volume 1 is a revised, extended and updated translation of the book Cauchyjev raeun ostataka sa primenama published in Serbian by Nau~na knjiga, Belgrade in 1978, whereas the greater part ...

  5. Sugarcane rice residue biochars and their applications

    Science.gov (United States)

    Wang, J. J.

    2014-12-01

    Sugarcane production in U.S. involves either pre-harvest burning or after-harvest burning of the residue. Approximately 70-90% of the dry matter of harvested sugarcane trash is lost through open field burning. This practice has caused considerable concerns over air quality and soil sustainability. We propose an alternative conservation approach to convert the sugarcane residue to biochar and used as soil amendment to conserve carbon and potentially improve soil fertility. In this study, fundamental properties of biochars made from sugarcane residue along with rice residues were tested for agronomic and environmental benefits. Sugarcane and rice harvest residues and milling processing byproducts bagasse and rice husk were converted to biochars at different pyrolysis temperatures and characterized. In general, sugarcane leave biochar contained more P, K, Ca and Mg than sugarcane bagasse biochar. Rice straw biochar had more S, K Ca but less P than rice husk biochar. Both biochars had higher available fraction of total P than that of total K. Sugarcane leave biochar converted at 450oC was dominated with various lignin derived phenols as well as non-specific aromatic compounds whereas bagasse biochar was with both lignin derived phenol and poly aromatic hydrocarbon (PAH). Rice straw char was dominated with non-specific aromatic compounds. At 750oC, charred material was dominated with aromatic ethers while losing the aromatic C=C structures. These molecular and surface property differences likely contributed to the difference in water holding capacities observed with these biochars. On the other hand, rice straw biochars produced at different pyrolysis temperatures had no significant effect on rice germination. Soils treated with sugarcane leave/trash biochar significantly enhanced sugarcane growth especially the root length. Treating soil with either sugarcane leave or bagasse char also enhanced soil adsorption capacity of atrazine; a common herbicide used in sugarcane

  6. Effect of immune system stimulation and divergent selection for residual feed intake on digestive capacity of the small intestine in growing pigs.

    Science.gov (United States)

    Rakhshandeh, A; Dekkers, J C M; Kerr, B J; Weber, T E; English, J; Gabler, N K

    2012-12-01

    Little is known of the consequences of divergent selection for residual feed intake (RFI) on intestinal digestion capacity, particularly during immune system stimulation (ISS). Our objective was to evaluate the impact of ISS and divergent selection for RFI on apparent ileal digestibility (AID) and apparent fecal digestibility (AFD) of nutrients and intestinal nutrient active transport and barrier function. Twenty-eight gilts (63 ± 4 kg BW) from low RFI (LRFI; n = 14) and high RFI (HRFI; n = 14) Yorkshire lines were randomly selected from the Iowa State University RFI herd. Following adaptation, 8 pigs in each line were injected intramuscularly and every 48 h for 7 d with increasing amounts of Escherichia coli lipopolysaccharide (ISS+). Remaining pigs were injected with saline (ISS-). Pigs were then euthanized and ileal digesta was collected for measuring AID of nutrients. Fecal samples were collected on a daily basis and pooled for measuring AFD of nutrients. A segment of ileum was used to measure nutrient transport and transepithelial resistance (TER) and/or barrier integrity by Ussing chambers. No effects of line or its interaction with ISS on AID of CP (N × 6.25) and OM, TER, and active nutrients transport were observed. However, ISS decreased (P digestive capacity of growing pigs during ISS. Immune system stimulation affects both AID and AFD of dietary CP.

  7. Calcination/dissolution residue treatment

    International Nuclear Information System (INIS)

    Knight, R.C.; Creed, R.F.; Patello, G.K.; Hollenberg, G.W.; Buehler, M.F.; O'Rourke, S.M.; Visnapuu, A.; McLaughlin, D.F.

    1994-09-01

    Currently, high-level wastes are stored underground in steel-lined tanks at the Hanford site. Current plans call for the chemical pretreatment of these wastes before their immobilization in stable glass waste forms. One candidate pretreatment approach, calcination/dissolution, performs an alkaline fusion of the waste and creates a high-level/low-level partition based on the aqueous solubilities of the components of the product calcine. Literature and laboratory studies were conducted with the goal of finding a residue treatment technology that would decrease the quantity of high-level waste glass required following calcination/dissolution waste processing. Four elements, Fe, Ni, Bi, and U, postulated to be present in the high-level residue fraction were identified as being key to the quantity of high-level glass formed. Laboratory tests of the candidate technologies with simulant high-level residues showed reductive roasting followed by carbonyl volatilization to be successful in removing Fe, Ni, and Bi. Subsequent bench-scale tests on residues from calcination/dissolution processing of genuine Hanford Site tank waste showed Fe was separated with radioelement decontamination factors of 70 to 1,000 times with respect to total alpha activity. Thermodynamic analyses of the calcination of five typical Hanford Site tank waste compositions also were performed. The analyses showed sodium hydroxide to be the sole molten component in the waste calcine and emphasized the requirement for waste blending if fluid calcines are to be achieved. Other calcine phases identified in the thermodynamic analysis indicate the significant thermal reconstitution accomplished in calcination

  8. Characterisation and management of concrete grinding residuals.

    Science.gov (United States)

    Kluge, Matt; Gupta, Nautasha; Watts, Ben; Chadik, Paul A; Ferraro, Christopher; Townsend, Timothy G

    2018-02-01

    Concrete grinding residue is the waste product resulting from the grinding, cutting, and resurfacing of concrete pavement. Potential beneficial applications for concrete grinding residue include use as a soil amendment and as a construction material, including as an additive to Portland cement concrete. Concrete grinding residue exhibits a high pH, and though not hazardous, it is sufficiently elevated that precautions need to be taken around aquatic ecosystems. Best management practices and state regulations focus on reducing the impact on such aquatic environment. Heavy metals are present in concrete grinding residue, but concentrations are of the same magnitude as typically recycled concrete residuals. The chemical composition of concrete grinding residue makes it a useful product for some soil amendment purposes at appropriate land application rates. The presence of unreacted concrete in concrete grinding residue was examined for potential use as partial replacement of cement in new concrete. Testing of Florida concrete grinding residue revealed no dramatic reactivity or improvement in mortar strength.

  9. Polychlorinated Biphenyls (PCB) Residue Effects Database

    Data.gov (United States)

    U.S. Environmental Protection Agency — The PCB Residue Effects (PCBRes) Database was developed to assist scientists and risk assessors in correlating PCB and dioxin-like compound residues with toxic...

  10. Interpretation on Recycling Plastics from Shredder Residue

    Science.gov (United States)

    EPA is considering an interpretation of its regulations that would generally allow for recycling of plastic separated from shredder residue under the conditions described in the Voluntary Procedures for Recycling Plastics from Shredder Residue.

  11. Residual Analysis of Generalized Autoregressive Integrated Moving ...

    African Journals Online (AJOL)

    In this study, analysis of residuals of generalized autoregressive integrated moving average bilinear time series model was considered. The adequacy of this model was based on testing the estimated residuals for whiteness. Jarque-Bera statistic and squared-residual autocorrelations were used to test the estimated ...

  12. 9 CFR 311.39 - Biological residues.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Biological residues. 311.39 Section... Biological residues. Carcasses, organs, or other parts of carcasses of livestock shall be condemned if it is determined that they are adulterated because of the presence of any biological residues. ...

  13. Cycling of grain legume residue nitrogen

    DEFF Research Database (Denmark)

    Jensen, E.S.

    1995-01-01

    Symbiotic nitrogen fixation by legumes is the main input of nitrogen in ecological agriculture. The cycling of N-15-labelled mature pea (Pisum sativum L.) residues was studied during three years in small field plots and lysimeters. The residual organic labelled N declined rapidly during the initial...... management methods in order to conserve grain legume residue N sources within the soil-plant system....

  14. Neutron residual stress measurements in linepipe

    Science.gov (United States)

    Law, Michael; Gnaëpel-Herold, Thomas; Luzin, Vladimir; Bowie, Graham

    2006-11-01

    Residual stresses in gas pipelines are generated by manufacturing and construction processes and may affect the subsequent pipe integrity. In the present work, the residual stresses in eight samples of linepipe were measured by neutron diffraction. Residual stresses changed with some coating processes. This has special implications in understanding and mitigating stress corrosion cracking, a major safety and economic problem in some gas pipelines.

  15. Neutron residual stress measurements in linepipe

    International Nuclear Information System (INIS)

    Law, Michael; Gnaepel-Herold, Thomas; Luzin, Vladimir; Bowie, Graham

    2006-01-01

    Residual stresses in gas pipelines are generated by manufacturing and construction processes and may affect the subsequent pipe integrity. In the present work, the residual stresses in eight samples of linepipe were measured by neutron diffraction. Residual stresses changed with some coating processes. This has special implications in understanding and mitigating stress corrosion cracking, a major safety and economic problem in some gas pipelines

  16. Glycogen is large molecules wherein Glucose residues

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Glycogen is large molecules wherein Glucose residues. Glycogen is large molecules wherein Glucose residues. linked by α-(1- 4) glycosidic bonds into chains and chains. branch via α-(1- 6) linkage. Branching points are about every fourth residue – allows. glucose ...

  17. Identification of Amino Acid Residues Responsible for the Enantioselectivity and Amide Formation Capacity of the Arylacetonitrilase from Pseudomonas fluorescens EBC191 ▿ †

    Science.gov (United States)

    Kiziak, Christoph; Stolz, Andreas

    2009-01-01

    The nitrilase from Pseudomonas fluorescens EBC191 converted (R,S)-mandelonitrile with a low enantioselectivity to (R)-mandelic acid and (S)-mandeloamide in a ratio of about 4:1. In contrast, the same substrate was hydrolyzed by the homologous nitrilase from Alcaligenes faecalis ATCC 8750 almost exclusively to (R)-mandelic acid. A chimeric enzyme between both nitrilases was constructed, which represented in total 16 amino acid exchanges in the central part of the nitrilase from P. fluorescens EBC191. The chimeric enzyme clearly resembled the nitrilase from A. faecalis ATCC 8750 in its turnover characteristics for (R,S)-mandelonitrile and (R,S)-2-phenylpropionitrile (2-PPN) and demonstrated an even higher enantioselectivity for the formation of (R)-mandelic acid than the nitrilase from A. faecalis. An alanine residue (Ala165) in direct proximity to the catalytically active cysteine residue was replaced in the nitrilase from P. fluorescens by a tryptophan residue (as found in the nitrilase from A. faecalis ATCC 8750 and most other bacterial nitrilases) and several other amino acid residues. Those enzyme variants that possessed a larger substituent in position 165 (tryptophan, phenylalanine, tyrosine, or histidine) converted racemic mandelonitrile and 2-PPN to increased amounts of the R enantiomers of the corresponding acids. The enzyme variant Ala165His showed a significantly increased relative activity for mandelonitrile (compared to 2-PPN), and the opposite was found for the enzyme variants carrying aromatic residues in the relevant position. The mutant forms carrying an aromatic substituent in position 165 generally formed significantly reduced amounts of mandeloamide from mandelonitrile. The important effect of the corresponding amino acid residue on the reaction specificity and enantiospecificity of arylacetonitrilases was confirmed by the construction of a Trp164Ala variant of the nitrilase from A. faecalis ATCC 8750. This point mutation converted the highly R

  18. Natural radioactivity in petroleum residues

    International Nuclear Information System (INIS)

    Gazineu, M.H.P.; Gazineu, M.H.P.; Hazin, C.A.; Hazin, C.A.

    2006-01-01

    The oil extraction and production industry generates several types of solid and liquid wastes. Scales, sludge and water are typical residues that can be found in such facilities and that can be contaminated with Naturally Occurring Radioactive Material (N.O.R.M.). As a result of oil processing, the natural radionuclides can be concentrated in such residues, forming the so called Technologically Enhanced Naturally Occurring Radioactive Material, or T.E.N.O.R.M.. Most of the radionuclides that appear in oil and gas streams belong to the 238 U and 232 Th natural series, besides 40 K. The present work was developed to determine the radionuclide content of scales and sludge generated during oil extraction and production operations. Emphasis was given to the quantification of 226 Ra, 228 Ra and 40 K since these radionuclides,are responsible for most of the external exposure in such facilities. Samples were taken from the P.E.T.R.O.B.R.A.S. unity in the State of Sergipe, in Northeastern Brazil. They were collected directly from the inner surface of water pipes and storage tanks, or from barrels stored in the waste storage area of the E and P unit. The activity concentrations for 226 Ra, 228 Ra and 40 K were determined by using an HP Ge gamma spectrometric system. The results showed concentrations ranging from 42.7 to 2,110.0 kBq/kg for 226 Ra, 40.5 to 1,550.0 kBq/kg for 228 Ra, and 20.6 to 186.6 kBq/kg for 40 K. The results highlight the importance of determining the activity concentration of those radionuclides in oil residues before deciding whether they should be stored or discarded to the environment. (authors)

  19. Natural radioactivity in petroleum residues

    Energy Technology Data Exchange (ETDEWEB)

    Gazineu, M.H.P. [UNICAP, Dept. de Quimica, Recife (Brazil); Gazineu, M.H.P.; Hazin, C.A. [UFPE, Dept. de Energia Nuclear, Recife (Brazil); Hazin, C.A. [Centro Regional de Ciencias Nucleares/ CNEN, Recife (Brazil)

    2006-07-01

    The oil extraction and production industry generates several types of solid and liquid wastes. Scales, sludge and water are typical residues that can be found in such facilities and that can be contaminated with Naturally Occurring Radioactive Material (N.O.R.M.). As a result of oil processing, the natural radionuclides can be concentrated in such residues, forming the so called Technologically Enhanced Naturally Occurring Radioactive Material, or T.E.N.O.R.M.. Most of the radionuclides that appear in oil and gas streams belong to the {sup 238}U and {sup 232}Th natural series, besides 40 K. The present work was developed to determine the radionuclide content of scales and sludge generated during oil extraction and production operations. Emphasis was given to the quantification of {sup 226}Ra, {sup 228}Ra and 40 K since these radionuclides,are responsible for most of the external exposure in such facilities. Samples were taken from the P.E.T.R.O.B.R.A.S. unity in the State of Sergipe, in Northeastern Brazil. They were collected directly from the inner surface of water pipes and storage tanks, or from barrels stored in the waste storage area of the E and P unit. The activity concentrations for {sup 226}Ra, {sup 228}Ra and 40 K were determined by using an HP Ge gamma spectrometric system. The results showed concentrations ranging from 42.7 to 2,110.0 kBq/kg for {sup 226}Ra, 40.5 to 1,550.0 kBq/kg for {sup 228}Ra, and 20.6 to 186.6 kBq/kg for 40 K. The results highlight the importance of determining the activity concentration of those radionuclides in oil residues before deciding whether they should be stored or discarded to the environment. (authors)

  20. Residual magnetic field in rotary machines; Campo magnetico residual en maquinas rotatorias

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez V, Esteban A; Apanco R, Marcelino [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)

    2007-07-01

    The residual magnetism is a phenomenon in which the magnetic dipoles of a substance are oriented in a certain degree. On the other hand, when internal forces exist capable of aligning elementary magnetic dipoles of a material, a permanent magnet is obtained. Just as in a conductor or in a material, in the elements of a rotary electrical machine magnetic fields can be induced that produce a residual magnetism or magnetization. In the rotary electrical machines, the magnetization phenomenon causes serious problems, such as the generation of induced currents that propitiate the mechanical wear in bearings, collars, trunnions and inclusive in the shaft, by effects known as pitting, frosting and spark tracks, as well as erroneous readings in vibration and temperature sensors, that in some cases can cause the shut down of the machine. In this article are presented the general concepts on the residual magnetism in rotary electrical machines, the causes that originate it and the problems that arises, as well as the demagnetization of the components that have residual magnetic field. The results obtained by the area of Electrical Equipment of the Instituto de Investigaciones Electricas are revised, during the execution of activities related to the measurement and elimination of the residual magnetic field in rotary electrical machines. [Spanish] El magnetismo residual es un fenomeno en el que los dipolos magneticos de una sustancia se encuentran orientados en un grado determinado. Por otro lado, cuando existen fuerzas internas capaces de alinear los dipolos magneticos elementales de un material, se tiene un iman permanente. Al igual que en un conductor o un material, en los elementos de una maquina electrica rotatoria se pueden inducir campos magneticos que producen un magnetismo residual o magnetizacion. En las maquinas electricas rotatorias, el fenomeno de magnetizacion causa graves problemas, como la generacion de corrientes inducidas que propician el desgaste mecanico

  1. Residual Liquefaction under Standing Waves

    DEFF Research Database (Denmark)

    Kirca, V.S. Ozgur; Sumer, B. Mutlu; Fredsøe, Jørgen

    2012-01-01

    This paper summarizes the results of an experimental study which deals with the residual liquefaction of seabed under standing waves. It is shown that the seabed liquefaction under standing waves, although qualitatively similar, exhibits features different from that caused by progressive waves....... The experimental results show that the buildup of pore-water pressure and the resulting liquefaction first starts at the nodal section and spreads towards the antinodal section. The number of waves to cause liquefaction at the nodal section appears to be equal to that experienced in progressive waves for the same...

  2. Process to recycle shredder residue

    Science.gov (United States)

    Jody, Bassam J.; Daniels, Edward J.; Bonsignore, Patrick V.

    2001-01-01

    A system and process for recycling shredder residue, in which separating any polyurethane foam materials are first separated. Then separate a fines fraction of less than about 1/4 inch leaving a plastics-rich fraction. Thereafter, the plastics rich fraction is sequentially contacted with a series of solvents beginning with one or more of hexane or an alcohol to remove automotive fluids; acetone to remove ABS; one or more of EDC, THF or a ketone having a boiling point of not greater than about 125.degree. C. to remove PVC; and one or more of xylene or toluene to remove polypropylene and polyethylene. The solvents are recovered and recycled.

  3. Residual replacement strategies for Krylov subspace iterative methods for the convergence of true residuals

    NARCIS (Netherlands)

    Vorst, H.A. van der; Ye, Q.

    1999-01-01

    In this paper, a strategy is proposed for alternative computations of the residual vectors in Krylov subspace methods, which improves the agreement of the computed residuals and the true residuals to the level of O(u)kAkkxk. Building on earlier ideas on residual replacement and on insights in

  4. Residual stress measurements of welded stainless steel 304 plate using the HANARO residual stress instrument

    International Nuclear Information System (INIS)

    Mun, M. K.; Lee, C. H.; Em, V. T.

    2001-01-01

    In order to nondestructively measure in-depth residual stress distribution of the metallic materials, it is unique method to use neutron diffraction. In this paper the principles of residual stress measurements by neutron diffraction is described. The residual stress distribution of welded strainless steeel 304 plate using te HANARO residual stress instrument is also described

  5. 40 CFR 721.4500 - Isopropylamine distillation residues and ethylamine distillation residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Isopropylamine distillation residues and ethylamine distillation residues. 721.4500 Section 721.4500 Protection of Environment... residues and ethylamine distillation residues. (a) Chemical substances and significant new use subject to...

  6. Residual analysis for spatial point processes

    DEFF Research Database (Denmark)

    Baddeley, A.; Turner, R.; Møller, Jesper

    process. Residuals are ascribed to locations in the empty background, as well as to data points of the point pattern. We obtain variance formulae, and study standardised residuals. There is also an analogy between our spatial residuals and the usual residuals for (non-spatial) generalised linear models...... or covariate effects. Q-Q plots of the residuals are effective in diagnosing interpoint interaction. Some existing ad hoc statistics of point patterns (quadrat counts, scan statistic, kernel smoothed intensity, Berman's diagnostic) are recovered as special cases....

  7. Cycling of grain legume residue nitrogen

    DEFF Research Database (Denmark)

    Jensen, E.S.

    1995-01-01

    weeks of decomposition, due to high rates of residue N net mineralization and subsequent leaching and denitrification losses of N. Lysimeter experiments showed that pea residues may reduce leaching losses of N, probably due to their effect on the mineralization-immobilizalion turnover of N...... and denitrification. Winter barley succeeding field pea recovered 13% of the incorporated pea residue N by early December; the recovery was found to be 15% at maturity in July. A spring-sown crop of barley recovered less than half the amount of pea residue N recovered by winter barley. The residue N-use efficiencies...

  8. Monitoring antibiotic residues in honey

    Directory of Open Access Journals (Sweden)

    Monica Cristina Cara,

    2011-12-01

    Full Text Available Next to the beta-lactam antibiotics in veterinary medicine, streptomycin is one of the mostly used antibiotics. High concentration of streptomycin could lead to ototoxic and nephrotoxic effects. Low concentration – as found in food – may cause allergies, destroy the intestinal flora and favor immunity to some pathogenic microorganisms. In 1948 chlortetracycline was isolated by Duggan as a metabolite and this was the first antibiotic substance of the group of tetracyclines. In the present paper there are presented the monitoring of the antibiotic residues in honey from Timis County. The residues of tetracycline and streptomycin in honey were determined by the method ELISA – a quantitative method of detection. The microtitre wells are coated with tetracycline and anti-streptomycin antibodies. Free antibiotic and immobilized antibiotic compete with the added antibiotic antibody (competitive immunoassay reaction. Any unbound antibody is then removed in a washing step. Bound conjugate enzymes convert the colorless chromogen into a blue product. The addition ofthe stop reagent leads to a color change from blue to yellow. The measurement is made photometrically at 450 nm. The absorption is inversely proportional to the antibiotic concentration in the sample.

  9. Residual Stresses In 3013 Containers

    International Nuclear Information System (INIS)

    Mickalonis, J.; Dunn, K.

    2009-01-01

    The DOE Complex is packaging plutonium-bearing materials for storage and eventual disposition or disposal. The materials are handled according to the DOE-STD-3013 which outlines general requirements for stabilization, packaging and long-term storage. The storage vessels for the plutonium-bearing materials are termed 3013 containers. Stress corrosion cracking has been identified as a potential container degradation mode and this work determined that the residual stresses in the containers are sufficient to support such cracking. Sections of the 3013 outer, inner, and convenience containers, in both the as-fabricated condition and the closure welded condition, were evaluated per ASTM standard G-36. The standard requires exposure to a boiling magnesium chloride solution, which is an aggressive testing solution. Tests in a less aggressive 40% calcium chloride solution were also conducted. These tests were used to reveal the relative stress corrosion cracking susceptibility of the as fabricated 3013 containers. Significant cracking was observed in all containers in areas near welds and transitions in the container diameter. Stress corrosion cracks developed in both the lid and the body of gas tungsten arc welded and laser closure welded containers. The development of stress corrosion cracks in the as-fabricated and in the closure welded container samples demonstrates that the residual stresses in the 3013 containers are sufficient to support stress corrosion cracking if the environmental conditions inside the containers do not preclude the cracking process.

  10. Residual Fragments after Percutaneous Nephrolithotomy

    Directory of Open Access Journals (Sweden)

    Kaan Özdedeli

    2012-09-01

    Full Text Available Clinically insignificant residual fragments (CIRFs are described as asymptomatic, noninfectious and nonobstructive stone fragments (≤4 mm remaining in the urinary system after the last session of any intervention (ESWL, URS or PCNL for urinary stones. Their insignificance is questionable since CIRFs could eventually become significant, as their presence may result in recurrent stone growth and they may cause pain and infection due to urinary obstruction. They may become the source of persistent infections and a significant portion of the patients will have a stone-related event, requiring auxilliary interventions. CT seems to be the ultimate choice of assessment. Although there is no concensus about the timing, recent data suggests that it may be performed one month after the procedure. However, imaging can be done in the immediate postoperative period, if there are no tubes blurring the assessment. There is some evidence indicating that selective medical therapy may have an impact on decreasing stone formation rates. Retrograde intrarenal surgery, with its minimally invasive nature, seems to be the best way to deal with residual fragments.

  11. MORTAR WITH UNSERVICEABLE TIRE RESIDUES

    Directory of Open Access Journals (Sweden)

    J. A. Canova

    2009-01-01

    Full Text Available This study analyzes the effects of unserviceable tire residues on rendering mortar using lime and washed sand at a volumetric proportion of 1:6. The ripened composite was dried in an oven and combined with both cement at a volumetric proportion of 1:1.5:9 and rubber powder in proportional aggregate volumes of 6, 8, 10, and 12%. Water exudation was evaluated in the plastic state. Water absorption by capillarity, fresh shrinkage and mass loss, restrained shrinkage and mass loss, void content, flexural strength, and deformation energy under compression were evaluated in the hardened state. There was an improvement in the water exudation and water absorption by capillarity and drying shrinkage, as well as a reduction of the void content and flexural strength. The product studied significantly aided the water exudation from mortar and, capillary elevation in rendering.

  12. MORTAR WITH UNSERVICEABLE TIRE RESIDUES

    Directory of Open Access Journals (Sweden)

    José Aparecido Canova

    2009-12-01

    Full Text Available This study analyzes the effects of unserviceable tire residues on rendering mortar using lime and washed sand at a volumetric proportion of 1:6. The ripened composite was dried in an oven and combined with both cement at a volumetric proportion of 1:1.5:9 and rubber powder in proportional aggregate volumes of 6, 8, 10, and 12%. Water exudation was evaluated in the plastic state. Water absorption by capillarity, fresh shrinkage and mass loss, restrained shrinkage and mass loss, void content, flexural strength, and deformation energy under compression were evaluated in the hardened state. There was an improvement in the water exudation and water absorption by capillarity and drying shrinkage, as well as a reduction of the void content and flexural strength. The product studied significantly aided the water exudation from mortar and, capillary elevation in rendering.

  13. Landfill Mining of Shredder Residues

    DEFF Research Database (Denmark)

    Hansen, Jette Bjerre; Hyks, Jiri; Shabeer Ahmed, Nassera

    In Denmark, shredder residues (SR) are classified as hazardous waste and until January 2012 the all SR were landfilled. It is estimated that more than 1.8 million tons of SR have been landfilled in mono cells. This paper describes investigations conducted at two Danish landfills. SR were excavated...... from the landfills and size fractionated in order to recover potential resources such as metal and energy and to reduce the amounts of SR left for re-landfilling. Based on the results it is estimated that 60-70% of the SR excavated could be recovered in terms of materials or energy. Only a fraction...... with particle size less than 5 mm needs to be re-landfilled at least until suitable techniques are available for recovery of materials with small particle sizes....

  14. Forest residues in cattle feed

    Directory of Open Access Journals (Sweden)

    João Elzeário Castelo Branco Iapichini

    2012-12-01

    Full Text Available The ruminants are capable of converting low-quality food, when they are complementes with high-energy source. Through the use of regional agricultural residues is possible to conduct more economical production systems, since energetic foods have high cost in animal production. There is very abundant availability of residues in agroforestry activities worldwide, so that if a small fraction of them were used with appropriate technical criteria they could largely meet the needs of existing herds in the world and thus meet the demands of consumption of protein of animal origin. The Southwest Region of São Paulo State has large area occupied by reforestation and wide availability of non-timber forest residues, which may represent more concentrated energetic food for ruminant production. This experiment aimed to evaluate the acceptability of ground pine (20, 30 and 40%, replacing part of the energetic food (corn, present in the composition of the concentrate and was performed at the Experimental Station of Itapetininga - Forest Institute / SMA, in the dry season of 2011. It were used four crossbred steers, mean 18 months old, average body weight of 250 kg, housed in a paddock provided with water ad libitum and covered troughs for supplementation with the experimental diet. The adjustment period of the animals was of 07 days and the measurement of the levels of consumption, physiological changes, acceptability and physiological parameters were observed during the following 25 days. The concentrate supplement was formulated based on corn (76.2%, Soybean Meal (20%, urea (2%, Ammonium sulfate (0.4%, calcite (1.4%, Mineral Core (1% and finely ground Pine Cone, replacing corn. In preparing food, the formulas were prepared to make them isoproteic/energetic, containing the following nutrient levels: 22% Crude Protein (CP and 79% of Total Nutrients (TDN. The animals received the supplement in three steps for each level of cone replaced, being offered in the

  15. Impact of changes of positive end-expiratory pressure on functional residual capacity at low tidal volume ventilation during general anesthesia.

    Science.gov (United States)

    Satoh, Daizoh; Kurosawa, Shin; Kirino, Wakaba; Wagatsuma, Toshihiro; Ejima, Yutaka; Yoshida, Akiko; Toyama, Hiroaki; Nagaya, Kei

    2012-10-01

    Several reports in the literature have described the effects of positive end-expiratory pressure (PEEP) level upon functional residual capacity (FRC) in ventilated patients during general anesthesia. This study compares FRC in mechanically low tidal volume ventilation with different PEEP levels during upper abdominal surgery. Before induction of anesthesia (awake) for nine patients with upper abdominal surgery, a tight-seal facemask was applied with 2 cmH(2)O pressure support ventilation and 100 % O(2) during FRC measurements conducted on patients in a supine position. After tracheal intubation, lungs were ventilated with bilevel airway pressure with a volume guarantee (7 ml/kg predicted body weight) and with an inspired oxygen fraction (FIO(2)) of 0.4. PEEP levels of 0, 5, and 10 cmH(2)O were used. Each level of 5 and 10 cmH(2)O PEEP was maintained for 2 h. FRC was measured at each PEEP level. FRC awake was significantly higher than that at PEEP 0 cmH(2)O (P cmH(2)O was significantly lower than that at 10 cmH(2)O (P cmH(2)O (P cmH(2)O was significantly lower than that for PEEP 5 cmH(2)O or PEEP 10 cmH(2)O (P cmH(2)O, PEEP 5 cmH(2)O after 2 h, and PEEP 10 cmH(2)O after 2 h were correlated with FRC (R = 0.671, P cmH(2)O is necessary to maintain lung function if low tidal volume ventilation is used during upper abdominal surgery.

  16. Characteristics and engineering properties of residual soil of volcanic deposits

    Science.gov (United States)

    Wibawa, Y. S.; Sugiarti, K.; Soebowo, E.

    2018-02-01

    Residual soil knowledge of volcanic-sedimentary rock products provides important information on the soil bearing capacity and its engineering properties. The residual soil is the result of weathering commonly found in unsaturated conditions, having varied geotechnical characteristics at each level of weathering. This paper summarizes the results of the research from the basic engineering properties of residual soil of volcanic-sedimentary rocks from several different locations. The main engineering properties of residual soil such as specific gravity, porosity, grain size, clay content (X-Ray test) and soil shear strength are performed on volcanic rock deposits. The results show that the variation of the index and engineering properties and the microstructure properties of residual soil have the correlation between the depths of weathering levels. Pore volume and pore size distribution on weathered rock profiles can be used as an indication of weathering levels in the tropics.

  17. Detection of antibiotic residues in poultry meat.

    Science.gov (United States)

    Sajid, Abdul; Kashif, Natasha; Kifayat, Nasira; Ahmad, Shabeer

    2016-09-01

    The antibiotic residues in poultry meat can pose certain hazards to human health among them are sensitivity to antibiotics, allergic reactions, mutation in cells, imbalance of intestinal micro biota and bacterial resistance to antibiotics. The purpose of the present paper was to detect antibiotic residue in poultry meat. During the present study a total of 80 poultry kidney and liver samples were collected and tested for detection of different antibiotic residues at different pH levels Eschericha coli at pH 6, 7 and Staphyloccocus aureus at pH 8 & 9. Out of 80 samples only 4 samples were positive for antibiotic residues. The highest concentrations of antibiotic residue found in these tissues were tetracycline (8%) followed by ampicilin (4%), streptomycine (2%) and aminoglycosides (1%) as compared to other antibiotics like sulfonamides, neomycine and gentamycine. It was concluded that these microorganism at these pH levels could be effectively used for detection of antibiotic residues in poultry meat.

  18. Distribution of residues and primitive roots

    Indian Academy of Sciences (India)

    Replacing the function f by g, we get the required estimate for N(p, N). D. Proof of Theorem 1.1. When p = 7, we clearly see that (1, 2) is a consecutive pair of quadratic residue modulo 7. Assume that p ≥ 11. If 10 is a quadratic residue modulo p, then we have (9, 10) as a consecutive pair of quadratic residues modulo p, ...

  19. Artificial Neural Networks and Concentration Residual Augmented ...

    African Journals Online (AJOL)

    Artificial Neural Networks and Concentration Residual Augmented Classical Least Squares for the Simultaneous Determination of Diphenhydramine, Benzonatate, Guaifenesin and Phenylephrine in their Quaternary Mixture.

  20. RESIDUES IN CARROTS TREATED WITH LINURON

    DEFF Research Database (Denmark)

    Løkke, Hans

    1974-01-01

    Investigations have been carried out on residues of linuron and its breakdown products in carrots sprayed with Jinuron at 1, 2, or 4 kg a.i./ha, 0, 19, 28, 36 or 60 days after sowing (up to 57 days before harvesting). The extracted residues were separated into three fractions by liquid......,4-dichloroaniline and iodide ion, followed by gas chromatography with electron capture detector. Only 5-13% of the extract-able residues were breakdown products. Most of the detectable residue (87-95%) was identified as linuron. The relative proportions of linuron and breakdown products in carrots at the time...

  1. Deep residual networks of residual networks for image super-resolution

    Science.gov (United States)

    Wei, Xueqi; Yang, Fumeng; Wu, Congzhong

    2017-11-01

    Single image super-resolution (SISR), which aims at obtaining a high-resolution image from a single low-resolution image, is a classical problem in computer vision. In this paper, we address this problem based on a deep learning method with residual learning in an end-to-end manner. We propose a novel residual-network architecture, Residual networks of Residual networks (RoR), to promote the learning capability of residual networks for SISR. In residual network, the signal can be directly propagated from one unit to any other units in both forward and backward passes when using identity mapping as the skip connections. Based on it, we add level-wise connections upon original residual networks, to dig the optimization ability of residual networks. Our experiments demonstrate the effectiveness and versatility of RoR, it can get a faster convergence speed and gain higher resolution accuracy from considerably increased depth.

  2. Ammonia emission from crop residues : quantification of ammonia volatilization based on crop residue properties

    NARCIS (Netherlands)

    Ruijter, de F.J.; Huijsmans, J.F.M.

    2012-01-01

    This paper gives an overview of available literature data on ammonia volatilization from crop residues. From these data, a relation is derived for the ammonia emission depending on the N-content of crop residue.

  3. Process for measuring residual stresses

    International Nuclear Information System (INIS)

    Elfinger, F.X.; Peiter, A.; Theiner, W.A.; Stuecker, E.

    1982-01-01

    No single process can at present solve all problems. The complete destructive processes only have a limited field of application, as the component cannot be reused. However, they are essential for the basic determination of stress distributions in the field of research and development. Destructive and non-destructive processes are mainly used if investigations have to be carried out on original components. With increasing component size, the part of destructive tests becomes smaller. The main applications are: quality assurance, testing of manufactured parts and characteristics of components. Among the non-destructive test procedures, X-raying has been developed most. It gives residual stresses on the surface and on surface layers near the edges. Further development is desirable - in assessment - in measuring techniques. Ultrasonic and magnetic crack detection processes are at present mainly used in research and development, and also in quality assurance. Because of the variable depth of penetration and the possibility of automation they are gaining in importance. (orig./RW) [de

  4. Functional residual capacity (FRC) and lung clearance index (LCI) in mechanically ventilated infants: application in the newborn with congenital diaphragmatic hernia (CDH).

    Science.gov (United States)

    Landolfo, Francesca; Savignoni, Ferdinando; Capolupo, Irma; Columbo, Claudia; Calzolari, Flaminia; Giliberti, Paola; Chukhlantseva, Natalia; Bagolan, Pietro; Dotta, Andrea

    2013-07-01

    Functional residual capacity (FRC) and lung clearance index (LCI) are sensitive parameters for early detection of airway disease in infancy. The closed helium dilution method has been applied to assess lung volume and ventilation inhomogeneity (VI) in spontaneously breathing infants. The aims of this study were as follows: (1) to assess applicability of the helium gas dilution technique in mechanically ventilated infants with high-risk congenital diaphragmatic hernia (CDH) and to evaluate changes in breathing patterns, lung volume, and VI during the first days of life before and after surgery, and (2) to analyze the possible correlation between changes in lung volume, cerebral hemodynamics, and oxygenation before and after surgical correction of CDH through near-infrared spectroscopy (NIRS) monitoring. Lung function tests were performed by multibreath washout traces with an ultrasonic flowmeter and helium gas dilution technique. For all babies, three acceptable FRC and LCI measurements were collected for each test (mean and SD of three measurements were calculated) before surgery (T0), 24 h after surgery (T1) during mechanical ventilation, and within 24 h after extubation in spontaneous breathing (T2). Cerebral and splanchnic hemodynamics were continuously monitored by NIRS during mechanical ventilation to evaluate relationships between changes in lung volume and capillary-venous oxyhemoglobin saturation in tissues. Fraction of inspired oxygen delivered was adjusted to keep oxygen saturation between 90% and 95%. Thirteen CDH infants were studied; median GA = 38 weeks (range 35-41) and median BW = 3000 g (range 1850-3670). FRC and LCI significantly improved after extubation when compared with pre-surgical values. No differences were found in tidal volume (Vt) and NIRS monitoring before and after surgery and after extubation. Neither LCI nor FRC was correlated with NIRS values. Helium gas dilution technique is an applicable and reliable technique to measure lung

  5. Tank 12H residuals sample analysis report

    Energy Technology Data Exchange (ETDEWEB)

    Oji, L. N. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Shine, E. P. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Diprete, D. P. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Coleman, C. J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Hay, M. S. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-06-11

    The Savannah River National Laboratory (SRNL) was requested by Savannah River Remediation (SRR) to provide sample preparation and analysis of the Tank 12H final characterization samples to determine the residual tank inventory prior to grouting. Eleven Tank 12H floor and mound residual material samples and three cooling coil scrape samples were collected and delivered to SRNL between May and August of 2014.

  6. Does Bt Corn Really Produce Tougher Residues

    Science.gov (United States)

    Bt corn hybrids produce insecticidal proteins that are derived from a bacterium, Bacillus thuringiensis. There have been concerns that Bt corn hybrids produce residues that are relatively resistant to decomposition. We conducted four experiments that examined the decomposition of corn residues und...

  7. Residual stresses in steel and zirconium weldments

    International Nuclear Information System (INIS)

    Root, J.H.; Coleman, C.E.; Bowden, J.W.

    1997-01-01

    Three-dimensional scans of residual stress within intact weldments provide insight into the consequences of various welding techniques and stress-relieving procedures. The neutron diffraction method for nondestructive evaluation of residual stresses has been applied to a circumferential weld in a ferritic steel pipe of outer diameter 114 mm and thickness 8.6 mm. The maximum tensile stresses, 250 MPa in the hoop direction, are found at mid-thickness of the fusion zone. The residual stresses approach zero within 20 mm from the weld center. The residual stresses caused by welding zirconium alloy components are partially to blame for failures due to delayed-hydride cracking. Neutron diffraction measurements in a GTA-welded Zr-2.5 Nb plate have shown that heat treatment at 530 C for 1 h reduces the longitudinal residual strain by 60%. Neutron diffraction has also been used to scan the residual stresses near circumferential electron beam welds in irradiated and unirradiated Zr-2.5 Nb pressure tubes. The residual stresses due to electron beam welding appear to be lower than 130 MPa, even in the as-welded state. No significant changes occur in the residual stress pattern of the electron-beam welded tube, during a prolonged exposure to thermal neutrons and the temperatures typical of an operating nuclear reactor

  8. Densification of FL Chains via Residuated Frames

    Czech Academy of Sciences Publication Activity Database

    Baldi, Paolo; Terui, K.

    2016-01-01

    Roč. 75, č. 2 (2016), s. 169-195 ISSN 0002-5240 R&D Projects: GA ČR GAP202/10/1826 Keywords : densifiability * standard completeness * residuated lattices * residuated frames * fuzzy logic Subject RIV: BA - General Mathematics Impact factor: 0.625, year: 2016

  9. Spatial resolution enhancement residual coding using hybrid ...

    Indian Academy of Sciences (India)

    a normal video frames possess distinct characteristics compared to a residual frame. In this paper, we .... analyze the characteristics of IP, MC and RE residuals (Kamisli 2010; Rao et al 2007). The estimation ..... Eslami R and Radha H 2007 A new family of nonredundant transforms using hybrid wavelets and directional filter ...

  10. Semantic Tagging with Deep Residual Networks

    NARCIS (Netherlands)

    Bjerva, Johannes; Plank, Barbara; Bos, Johan

    2016-01-01

    We propose a novel semantic tagging task, semtagging, tailored for the purpose of multilingual semantic parsing, and present the first tagger using deep residual networks (ResNets). Our tagger uses both word and character representations and includes a novel residual bypass architecture. We evaluate

  11. Soil water evaporation and crop residues

    Science.gov (United States)

    Crop residues have value when left in the field and also when removed from the field and sold as a commodity. Reducing soil water evaporation (E) is one of the benefits of leaving crop residues in place. E was measured beneath a corn canopy at the soil suface with nearly full coverage by corn stover...

  12. Unicystic ameloblastoma arising from a residual cyst

    Science.gov (United States)

    Mahajan, Amit D; Manjunatha, Bhari Sharanesha; Khurana, Neha M; Shah, Navin

    2014-01-01

    Intraoral swellings involving alveolar ridges in edentulous patients are clinically diagnosed as residual cysts, traumatic bone cysts, Stafne's jaw bone cavity, ameloblastoma and metastatic tumours of the jaw. This case report describes a residual cyst in a 68-year-old edentulous male patient which was enucleated and histopathologically confirmed as a unicystic ameloblastoma. PMID:25199192

  13. Electrodialytic remediation of air pollution control residues

    DEFF Research Database (Denmark)

    Jensen, Pernille Erland

    Air pollution control (APC) residue from municipal solid waste incineration (MSWI) consists of the fly ash, and, in dry and semi-dry systems, also the reaction products from the flue gas cleaning process. APC residue is considered a hazardous waste due to its high alkalinity, high content of salts...

  14. Distribution of residues and primitive roots

    Indian Academy of Sciences (India)

    quadratic residues and non-residues cases using some refinement of van der Warden's the- orem in combinatorial number theory. Therefore, in his proof, the constant p0(N) depends on the van der Warden number, which is very difficult to calculate for all N. For instance, recently, Luca and Thangadurai [8] proved that for all ...

  15. Bioaccumulation and distribution of organochlorine residues across ...

    African Journals Online (AJOL)

    The transfer of organochlorine residues in the food chain and its distribution in the trophic levels was influenced by habitat, environmental conditions, feeding habit and biochemical composition of individual populations. The total residual concentration of OCPs in shellfish and fish ranged between 0.16 ppm and 0.69 ppm.

  16. Power from wastewater and residual products

    DEFF Research Database (Denmark)

    Krogh-Jeppesen, K.

    2007-01-01

    Microbial fuel cells utilise wastewater and residual products from the pretreatment of straw to generate power. Denmark could lead the way......Microbial fuel cells utilise wastewater and residual products from the pretreatment of straw to generate power. Denmark could lead the way...

  17. Residuals Management and Water Pollution Control Planning.

    Science.gov (United States)

    Environmental Protection Agency, Washington, DC. Office of Public Affairs.

    This pamphlet addresses the problems associated with residuals and water quality especially as it relates to the National Water Pollution Control Program. The types of residuals and appropriate management systems are discussed. Additionally, one section is devoted to the role of citizen participation in developing management programs. (CS)

  18. Residuals and the Residual-Based Statistic for Testing Goodness of Fit of Structural Equation Models

    Science.gov (United States)

    Foldnes, Njal; Foss, Tron; Olsson, Ulf Henning

    2012-01-01

    The residuals obtained from fitting a structural equation model are crucial ingredients in obtaining chi-square goodness-of-fit statistics for the model. The authors present a didactic discussion of the residuals, obtaining a geometrical interpretation by recognizing the residuals as the result of oblique projections. This sheds light on the…

  19. 77 FR 24671 - Compliance Guide for Residue Prevention and Agency Testing Policy for Residues

    Science.gov (United States)

    2012-04-25

    ... Food Safety and Inspection Service Compliance Guide for Residue Prevention and Agency Testing Policy for Residues AGENCY: Food Safety and Inspection Service, USDA. ACTION: Notice of availability and... availability of a compliance guide for the prevention of violative residues in livestock slaughter...

  20. Residual stress measurement for injection molded components

    Directory of Open Access Journals (Sweden)

    Achyut Adhikari

    2016-07-01

    Full Text Available Residual stress induced during manufacturing of injection molded components such as polymethyl methacrylate (PMMA affects the mechanical and optical properties of these components. These residual stresses can be visualized and quantified by measuring their birefringence. In this paper, a low birefringence polariscope (LBP is used to measure the whole-field residual stress distribution of these injection molded specimens. Detailed analytical and experimental study is conducted to quantify the residual stress measurement in these materials. A commercial birefringence measurement system was used to validate the results obtained to our measurement system. This study can help in material diagnosis for quality and manufacturing purpose and be useful for understanding of residual stress in imaging or other applications.

  1. Residual stresses in zircaloy welds

    International Nuclear Information System (INIS)

    Santisteban, J. R.; Fernandez, L; Vizcaino, P.; Banchik, A.D.; Samper, R; Martinez, R. L; Almer, J; Motta, A.T.; Colas, K.B; Kerr, M.; Daymond, M.R

    2009-01-01

    Welds in Zirconium-based alloys are susceptible to hydrogen embrittlement, as H enters the material due to dissociation of water. The yield strain for hydride cracking has a complex dependence on H concentration, stress state and texture. The large thermal gradients produced by the applied heat; drastically changes the texture of the material in the heat affected zone, enhancing the susceptibility to delayed hydride cracking. Normally hydrides tend to form as platelets that are parallel to the normal direction, but when welding plates, hydride platelets may form on cooling with their planes parallel to the weld and through the thickness of the plates. If, in addition to this there are significant tensile stresses, the susceptibility of the heat affected zone to delayed hydride cracking will be increased. Here we have measured the macroscopic and microscopic residual stressed that appear after PLASMA welding of two 6mm thick Zircaloy-4 plates. The measurements were based on neutron and synchrotron diffraction experiments performed at the Isis Facility, UK, and at Advanced Photon Source, USA, respectively. The experiments allowed assessing the effect of a post-weld heat treatment consisting of a steady increase in temperature from room temperature to 450oC over a period of 4.5 hours; followed by cooling with an equivalent cooling rate. Peak tensile stresses of (175± 10) MPa along the longitudinal direction were found in the as-welded specimen, which were moderately reduced to (150±10) MPa after the heat-treatment. The parent material showed intergranular stresses of (56±4) MPa, which disappeared on entering the heat-affected zone. In-situ experiments during themal cyclong of the material showed that these intergranular stresses result from the anisotropy of the thermal expansion coefficient of the hexagonal crystal lattice. [es

  2. Residual complaints after neuralgic amyotrophy.

    Science.gov (United States)

    Cup, Edith H; Ijspeert, Jos; Janssen, Renske J; Bussemaker-Beumer, Chaska; Jacobs, Joost; Pieterse, Allan J; van der Linde, Harmen; van Alfen, Nens

    2013-01-01

    To develop recommendations regarding outcome measures and topics to be addressed in rehabilitation for persons with neuralgic amyotrophy (NA), this study explored which functions and activities are related to persisting pain in NA and which questionnaires best capture these factors. A questionnaire-based survey from 2 cross-sectional cohorts, one of patients visiting the neurology outpatient clinic and a cohort seen at a multidisciplinary plexus clinic. Two tertiary referral clinics based in the Department of Neurology and Rehabilitation from a university medical center provided the data. A referred sample of patients (N=248) with either idiopathic or hereditary NA who fulfilled the criteria for this disorder, in whom the last episode of NA had been at least 6 months ago and included brachial plexus involvement. Not applicable. Two custom clinical screening questionnaires were used as well as the Shoulder Rating Questionnaire-Dutch Language Version, the Shoulder Pain and Disability Index (SPADI), the Shoulder Disability Questionnaire (SDQ), and Overall Disability Sum Score. The survey confirms the high prevalence of persisting pain and impairments. More than half of the patients were restricted by pain, while in those without pain 60% experienced residual paresis. Correlations show an intimate relation between pain, scapular instability, problems with overhead activities, and increased fatigability. A standard physical therapy approach was ineffective or aggravated symptoms in more than 50%. Pain and fatigue are strongly correlated to persisting scapular instability and increased fatigability of the affected muscles in NA. Our results suggest that an integrated rehabilitation approach is needed in which all of these factors are addressed. We further recommend using the SPADI and SDQ in future studies to evaluate the natural course and treatment effects in NA. Copyright © 2013 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights

  3. Manual of Standard Operating Procedures for Veterinary Drug Residue Analysis

    International Nuclear Information System (INIS)

    2016-01-01

    Laboratories are crucial to national veterinary drug residue monitoring programmes. However, one of the main challenges laboratories encounter is obtaining access to relevant methods of analysis. Thus, in addition to training, providing technical advice and transferring technology, the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture has resolved to develop clear and practical manuals to support Member State laboratories. The Coordinated Research Project (CRP) on Development of Radiometric and Allied Analytical Methods to Strengthen Residue Control Programs for Antibiotic and Anthelmintic Veterinary Drug Residues has developed a number of analytical methods as standard operating procedures (SOPs), which are now compiled here. This publication contains SOPs on chromatographic and spectrometric techniques, as well as radioimmunoassay and associated screening techniques, for various anthelmintic and antimicrobial veterinary drug residue analysis. Some analytical method validation protocols are also included. The publication is primarily aimed at food and environmental safety laboratories involved in testing veterinary drug residues, including under organized national residue monitoring programmes. It is expected to enhance laboratory capacity building and competence through the use of radiometric and complementary tools and techniques. The publication is also relevant for applied research on residues of veterinary drugs in food and environmental samples

  4. Residual DPCM about Motion Compensated Residual Signal for H.264 Lossless Coding

    Science.gov (United States)

    Han, Ki-Hun; Rao, Kamisetty R.; Lee, Yung-Lyul

    In this letter, a new Inter lossless coding method based on a residual DPCM (Differential Pulse Code Modulation) is proposed to improve compression ratio in the H.264 standard. Since the spatial correlation in a residual block can be further exploited among the residual signals after motion estimation/compensation, horizontal or vertical DPCM in the residual signals can be applied to further reduce the magnitudes of the residual signals. The proposed method reduces the average bitrates of 3.5% compared with the Inter lossless coding of the H.264 standard.

  5. Novel feature for catalytic protein residues reflecting interactions with other residues.

    Directory of Open Access Journals (Sweden)

    Yizhou Li

    Full Text Available Owing to their potential for systematic analysis, complex networks have been widely used in proteomics. Representing a protein structure as a topology network provides novel insight into understanding protein folding mechanisms, stability and function. Here, we develop a new feature to reveal correlations between residues using a protein structure network. In an original attempt to quantify the effects of several key residues on catalytic residues, a power function was used to model interactions between residues. The results indicate that focusing on a few residues is a feasible approach to identifying catalytic residues. The spatial environment surrounding a catalytic residue was analyzed in a layered manner. We present evidence that correlation between residues is related to their distance apart most environmental parameters of the outer layer make a smaller contribution to prediction and ii catalytic residues tend to be located near key positions in enzyme folds. Feature analysis revealed satisfactory performance for our features, which were combined with several conventional features in a prediction model for catalytic residues using a comprehensive data set from the Catalytic Site Atlas. Values of 88.6 for sensitivity and 88.4 for specificity were obtained by 10-fold cross-validation. These results suggest that these features reveal the mutual dependence of residues and are promising for further study of structure-function relationship.

  6. Prediction of machining induced residual stresses

    Science.gov (United States)

    Pramod, Monangi; Reddy, Yarkareddy Gopi; Prakash Marimuthu, K.

    2017-07-01

    Whenever a component is machined, residual stresses are induced in it. These residual stresses induced in the component reduce its fatigue life, corrosion resistance and wear resistance. Thus it is important to predict and control the machining-induced residual stress. A lot of research is being carried out in this area in the past decade. This paper aims at prediction of residual stresses during machining of Ti-6Al-4V. A model was developed and under various combinations of cutting conditions such as, speed, feed and depth of cut, the behavior of residual stresses were simulated using Finite Element Model. The present work deals with the development of thermo-mechanical model to predict the machining induced residual stresses in Titanium alloy. The simulation results are compared with the published results. The results are in good agreement with the published results. Future work involves optimization or the cutting parameters that effect the machining induced residual stresses. The results obtained were validated with previous work.

  7. Residual stress field of ballised holes

    International Nuclear Information System (INIS)

    Lai, Man On; He, Zhimin

    2012-01-01

    Ballising, involving pushing a slightly over-sized ball made of hard material through a hole, is a kind of cold working process. Applying ballising process to fastener holes produces compressive residual stress on the edge of the holes, and therefore increases the fatigue life of the components or structures. Quantification of the residual stress field is critical to define and precede the ballising process. In this article, the ballised holes are modeled as cold-expanded holes. Elastic-perfectly plastic theory is employed to analyze the holes with cold expansion process. For theoretical simplification, an axially symmetrical thin plate with a cold expanded hole is assumed. The elasticplastic boundaries and residual stress distribution surrounding the cold expanded hole are derived. With the analysis, the residual stress field can be obtained together with actual cold expansion process in which only the diameters of hole before and after cold expansion need to be measured. As it is a non-destructive method, it provides a convenient way to estimate the elastic-plastic boundaries and residual stresses of cold worked holes. The approach is later extended to the case involving two cold-worked holes. A ballised hole is looked upon as a cold expanded hole and therefore is investigated by the approach. Specimens ballised with different interference levels are investigated. The effects of interference levels and specimen size on residual stresses are studied. The overall residual stresses of plates with two ballised holes are obtained by superposing the residual stresses induced on a single ballised hole. The effects of distance between the centers of the two holes with different interference levels on the residual stress field are revealed

  8. Guidelines for selection and presentation of residue values of pesticides

    NARCIS (Netherlands)

    Velde-Koerts T van der; Hoeven-Arentzen PH van; Ossendorp BC; RIVM-SIR

    2004-01-01

    Pesticide residue assessments are executed to establish legal limits, called Maximum Residue Limits (MRLs). MRLs are derived from the results of these pesticide residue trials, which are performed according to critical Good Agricultural Practice. Only one residue value per residue trial may be

  9. RESIDUAL RISK ASSESSMENT: GAS DISTRIBUTION STAGE ...

    Science.gov (United States)

    This document describes the residual risk assessment for the Gas Distribution Stage 1 souce category. For stationary sources, section 112 (f) of the Clean Air Act requires EPA to assess risks to human health and the environment following implementation of technology-based control standards. If these technology-based control standards do not provide an ample margin of safety, then EPA is required to promulgate addtional standards. This document describes the methodology and results of the residual risk assessment performed for the Gas Distribution Stage 1 source category. The results of this analyiss will assist EPA in determining whether a residual risk rule for this source category is appropriate.

  10. Properties of residuals for spatial point processes

    DEFF Research Database (Denmark)

    Baddeley, A.; Møller, Jesper; Pakes, A. G.

    2008-01-01

    For any point process in Rd that has a Papangelou conditional intensity λ, we define a random measure of ‘innovations' which has mean zero. When the point process model parameters are estimated from data, there is an analogous random measure of ‘residuals'. We analyse properties of the innovation...... and residuals, including first and second moments, conditional independence, a martingale property, and lack of correlation. Some large sample asymptotics are studied. We derive the marginal distribution of smoothed residuals by solving a distributional equivalence....

  11. Mapping Residual Structure in Intrinsically Disordered Proteins at Residue Resolution Using Millisecond Hydrogen/Deuterium Exchange and Residue Averaging

    Science.gov (United States)

    Keppel, Theodore R.; Weis, David D.

    2015-04-01

    Measurement of residual structure in intrinsically disordered proteins can provide insights into the mechanisms by which such proteins undergo coupled binding and folding. The present work describes an approach to measure residual structure in disordered proteins using millisecond hydrogen/deuterium (H/D) exchange in a conventional bottom-up peptide-based workflow. We used the exchange mid-point, relative to a totally deuterated control, to quantify the rate of H/D exchange in each peptide. A weighted residue-by-residue average of these midpoints was used to map the extent of residual structure at near single-residue resolution. We validated this approach both by simulating a disordered protein and experimentally using the p300 binding domain of ACTR, a model disordered protein already well-characterized by other approaches. Secondary structure elements mapped in the present work are in good agreement with prior nuclear magnetic resonance measurements. The new approach was somewhat limited by a loss of spatial resolution and subject to artifacts because of heterogeneities in intrinsic exchange. Approaches to correct these limitations are discussed.

  12. Efficient particle filtering through residual nudging

    KAUST Repository

    Luo, Xiaodong

    2013-05-15

    We introduce an auxiliary technique, called residual nudging, to the particle filter to enhance its performance in cases where it performs poorly. The main idea of residual nudging is to monitor and, if necessary, adjust the residual norm of a state estimate in the observation space so that it does not exceed a pre-specified threshold. We suggest a rule to choose the pre-specified threshold, and construct a state estimate accordingly to achieve this objective. Numerical experiments suggest that introducing residual nudging to a particle filter may (substantially) improve its performance, in terms of filter accuracy and/or stability against divergence, especially when the particle filter is implemented with a relatively small number of particles. © 2013 Royal Meteorological Society.

  13. Surgical treatment for residual or recurrent strabismus

    Directory of Open Access Journals (Sweden)

    Tao Wang

    2014-12-01

    Full Text Available Although the surgical treatment is a relatively effective and predictable method for correcting residual or recurrent strabismus, such as posterior fixation sutures, medial rectus marginal myotomy, unilateral or bilateral rectus re-recession and resection, unilateral lateral rectus recession and adjustable suture, no standard protocol is established for the surgical style. Different surgical approaches have been recommended for correcting residual or recurrent strabismus. The choice of the surgical procedure depends on the former operation pattern and the surgical dosages applied on the patients, residual or recurrent angle of deviation and the operator''s preference and experience. This review attempts to outline recent publications and current opinion in the management of residual or recurrent esotropia and exotropia.

  14. Earthworm tolerance to residual agricultural pesticide contamination

    DEFF Research Database (Denmark)

    Givaudan, Nicolas; Binet, Françoise; Le Bot, Barbara

    2014-01-01

    This study investigates if acclimatization to residual pesticide contamination in agricultural soils is reflected in detoxification, antioxidant enzyme activities and energy budget of earthworms. Five fields within a joint agricultural area exhibited different chemical and farming histories from...

  15. Cyolane residues in milk of lactating goats

    International Nuclear Information System (INIS)

    Zayed, S.M.A.D.; Osman, A.; Fakhr, I.M.I.

    1981-01-01

    Consecutive feeding of lactating goats with 14 C-alkyl labelled cyolane for 5 days at dietary levels 8 and 16 ppm resulted in the appearance of measurable insecticide residues in milk (0.02-0.04 mg/kg). The residue levels were markedly reduced after a withdrawal period of 7 days. Analysis of urine and milk residues showed the presence of similar metabolites in addition to the parent compound. The major part of the residue consisted of mono-, diethyl phosphate and 2 hydrophilic unknown metabolites. The erythrocyte cholinesterase activity was reduced to about 50% after 24 hours whereas the plasma enzyme was only slightly affected. The animals remained symptom-free during the experimental period. (author)

  16. On the residual properties of damaged FRC

    Science.gov (United States)

    Zerbino, R.; Torrijos, M. C.; Giaccio, G.

    2017-09-01

    A discussion on the residual behaviour of Fibre Reinforced Concrete (FRC) is performed based on two selected cases of concrete degradation: the exposure at High Temperatures and the development of Alkali Silica Reactions. In addition, and taking in mind that the failure mechanism in FRC is strongly related with the fibre pull-out strength, the bond strength in damaged matrices was shown concluding that the residual bond strength is less affected than the matrix strength. As the damage increases, the compressive strength and the modulus of elasticity decrease, being the modulus of elasticity the most affected. There were no significant changes produced by the incorporation of fibres on the residual behaviour when compared with previous experience on plain damage concrete. Regarding the tensile behaviour although the first peak decreases as the damage increases, even for a severely damage FRC the residual stresses remain almost unaffected.

  17. FINITE ELEMENT MODEL FOR PREDICTING RESIDUAL ...

    African Journals Online (AJOL)

    direction (σx) had a maximum value of 375MPa (tensile) and minimum value of ... These results shows that the residual stresses obtained by prediction from the finite element method are in fair agreement with the experimental results.

  18. Impact of diverse soil microbial communities on crop residues decomposition

    Science.gov (United States)

    Mrad, Fida; Bennegadi-Laurent, Nadia; Ailhas, Jérôme; Leblanc, Nathalie; Trinsoutrot-Gattin, Isabelle; Laval, Karine; Gattin, Richard

    2017-04-01

    Soils provide many basic ecosystem services for our society and most of these services are carried out by the soil communities, thus influencing soils quality. Soil organic matter (SOM) can be considered as one of the most important soil quality indices for it plays a determinant role in many physical, chemical and biological processes, such as soil structure and erosion resistance, cation exchange capacity, nutrient cycling and biological activity (Andrews et al., 2004). Since a long time, exogenous organic inputs are largely used for improving agricultural soils, affecting highly soil fertility and productivity. The use of organic amendments such as crop residues influences the soil microbial populations' diversity and abundance. In the meantime, soil microbial communities play a major role in the organic matter degradation, and the effect of different microbial communities on the decomposition of crop residues is not well documented. In this context, studying the impact of crop residues on soil microbial ecology and the processes controlling the fate of plant residues in different management practices is essential for understanding the long-term environmental and agronomic effects on soil and organic matters. Our purpose in the present work was to investigate the decomposition by two contrasting microbial communities of three crop residues, and compare the effect of different residues amendments on the abundance and function of each soil microbial communities. Among the main crops which produce large amounts of residues, we focused on three different plants: wheat (Triticum aestivum L.), rape (Brassica napus) and sunflower (Helianthus annuus). The residues degradation in two soils of different management practices and the microbial activity were evaluated by: microbial abundance (microbial carbon, culturable bacteria, total DNA, qPCR), in combination with functional indicators (enzymatic assays and Biolog substrate utilization), kinetics of C and N

  19. Neutron diffraction residual strain / stress measurements

    International Nuclear Information System (INIS)

    Paradowska, Anna

    2012-01-01

    Residual stresses affect mechancial properties of materials and prodcuts, it is essential to estimate them practically in order to esatblish acceptable limits. Knowledge of the development of residual stresses in components at the various production stages- extrusion, rolling, machining, welding and heat treating-can be used to imporve product reliability and performance. This short article gives an example relevant to the power industry using ANSTO's 'Kowari' neutron strain scanner.

  20. Nitrogen mineralization from organic residues: research opportunities.

    Science.gov (United States)

    Cabrera, M L; Kissel, D E; Vigil, M F

    2005-01-01

    Research on nitrogen (N) mineralization from organic residues is important to understand N cycling in soils. Here we review research on factors controlling net N mineralization as well as research on laboratory and field modeling efforts, with the objective of highlighting areas with opportunities for additional research. Among the factors controlling net N mineralization are organic composition of the residue, soil temperature and water content, drying and rewetting events, and soil characteristics. Because C to N ratio of the residue cannot explain all the variability observed in N mineralization among residues, considerable effort has been dedicated to the identification of specific compounds that play critical roles in N mineralization. Spectroscopic techniques are promising tools to further identify these compounds. Many studies have evaluated the effect of temperature and soil water content on N mineralization, but most have concentrated on mineralization from soil organic matter, not from organic residues. Additional work should be conducted with different organic residues, paying particular attention to the interaction between soil temperature and water content. One- and two-pool exponential models have been used to model N mineralization under laboratory conditions, but some drawbacks make it difficult to identify definite pools of mineralizable N. Fixing rate constants has been used as a way to eliminate some of these drawbacks when modeling N mineralization from soil organic matter, and may be useful for modeling N mineralization from organic residues. Additional work with more complex simulation models is needed to simulate both gross N mineralization and immobilization to better estimate net N mineralized from organic residues.

  1. Disposal of radioactive residuals requires careful planning

    International Nuclear Information System (INIS)

    Pontius, F.W.

    1994-01-01

    Radionuclides removed from source waters during water treatment become concentrated in residual liquids and sludges. Treatment technologies used to remove these contaminants from source waters may generate wastes that contain substantial radioactivity. Water systems that install one or more of these technologies in order to comply with the maximum contaminant levels (MCLs) eventually adopted must dispose of the residuals. Disposal of radionuclide-containing wastes can be especially difficult, depending on the nature and amount of radioactivity present

  2. Plutonium fuel fabrication residues and wastes

    International Nuclear Information System (INIS)

    Arnal, T.; Cousinou, G.; Desille, H.

    1982-04-01

    This paper discusses the current situation in the fabrication plant at Cadarache with an annual plutonium throughput of several tons. Three major fabrication byproduct categories are defined in this plant: 1) scraps, directly recycled at the fabrication input station; 2) residues, byproducts recycled by chemical processes, or processed in washing and incineration stations; 3) wastes, placed in drums and evacuated directly to a waste conditioning station. The borderline between residues and wastes has yet to be precisely determined

  3. Protein structure based prediction of catalytic residues

    Science.gov (United States)

    2013-01-01

    Background Worldwide structural genomics projects continue to release new protein structures at an unprecedented pace, so far nearly 6000, but only about 60% of these proteins have any sort of functional annotation. Results We explored a range of features that can be used for the prediction of functional residues given a known three-dimensional structure. These features include various centrality measures of nodes in graphs of interacting residues: closeness, betweenness and page-rank centrality. We also analyzed the distance of functional amino acids to the general center of mass (GCM) of the structure, relative solvent accessibility (RSA), and the use of relative entropy as a measure of sequence conservation. From the selected features, neural networks were trained to identify catalytic residues. We found that using distance to the GCM together with amino acid type provide a good discriminant function, when combined independently with sequence conservation. Using an independent test set of 29 annotated protein structures, the method returned 411 of the initial 9262 residues as the most likely to be involved in function. The output 411 residues contain 70 of the annotated 111 catalytic residues. This represents an approximately 14-fold enrichment of catalytic residues on the entire input set (corresponding to a sensitivity of 63% and a precision of 17%), a performance competitive with that of other state-of-the-art methods. Conclusions We found that several of the graph based measures utilize the same underlying feature of protein structures, which can be simply and more effectively captured with the distance to GCM definition. This also has the added the advantage of simplicity and easy implementation. Meanwhile sequence conservation remains by far the most influential feature in identifying functional residues. We also found that due the rapid changes in size and composition of sequence databases, conservation calculations must be recalibrated for specific

  4. Residual stress measurement at Budapest Neutron Center

    International Nuclear Information System (INIS)

    Gyula, T.

    2005-01-01

    The use of residual stress measurements of different construction element and recent possibilities of Budapest Neutron Centre are presented. The details investigated already: gas turbine wheel, axial compressor blade, turbine blade and plastically deformed stainless steel. We demonstrated the use of a neutron scattering (SANS, residual stress, diffraction) for the materials behavior investigation in order to analyze the processes going on under the different mechanical loading. The direction of possible instrumental development is presented. (author)

  5. Ensemble Kalman filtering with residual nudging

    KAUST Repository

    Luo, X.

    2012-10-03

    Covariance inflation and localisation are two important techniques that are used to improve the performance of the ensemble Kalman filter (EnKF) by (in effect) adjusting the sample covariances of the estimates in the state space. In this work, an additional auxiliary technique, called residual nudging, is proposed to monitor and, if necessary, adjust the residual norms of state estimates in the observation space. In an EnKF with residual nudging, if the residual norm of an analysis is larger than a pre-specified value, then the analysis is replaced by a new one whose residual norm is no larger than a pre-specified value. Otherwise, the analysis is considered as a reasonable estimate and no change is made. A rule for choosing the pre-specified value is suggested. Based on this rule, the corresponding new state estimates are explicitly derived in case of linear observations. Numerical experiments in the 40-dimensional Lorenz 96 model show that introducing residual nudging to an EnKF may improve its accuracy and/or enhance its stability against filter divergence, especially in the small ensemble scenario.

  6. Validation of welded joint residual stress simulation

    International Nuclear Information System (INIS)

    Computational mechanics is being increasingly applied to predict the state of residual stress in welded joints for nuclear power plant applications. Motives for undertaking such calculations include optimising the design of welded joints and weld procedures, assessing the effectiveness of mitigation processes, providing more realistic inputs to structural integrity assessments and underwriting safety cases for operating nuclear power plant. Fusion welding processes involve intense localised heating to melt the surfaces to be joined and introduction of molten weld filler metal. A complex residual stress field develops at the weld through solidification, differential thermal contraction, cyclic thermal plasticity, phase transformation and chemical diffusion processes. The calculation of weld residual stress involves detailed non-linear analyses where many assumptions and approximations have to be made. In consequence, the accuracy and reliability of solutions can be highly variable. This paper illustrates the degree of variability that can arise in weld residual stress simulation results and summarises the new R6 guidelines which aim to improve the reliability and accuracy of computational predictions. The requirements for validating weld simulations are reviewed where residual stresses are to be used in fracture mechanics analysis. This includes a discussion of how to obtain and interpret measurements from mock-ups, benchmark weldments and published data. Benchmark weldments are described that illustrate some of the issues and show how validation of numerical prediction of weld residual stress can be achieved. Finally, plans for developing the weld modelling guidelines and associated benchmarks are outlined

  7. Residual Stresses in Thermoplastic Composites: A Review

    Directory of Open Access Journals (Sweden)

    M.M. Shokrieh

    2008-12-01

    Full Text Available Applications of thermoplastic composites have developed extensively. The thermoplastic composites in comparison with the thermoset composites have many advantages. Thermoplastic composites can be melted and remolded many times. The duration of manufacturing process of these composites is short, producing very tough material, and the welding ability and multiple recyclings are their further advantages. The lack of knowledge in this group of composites is the main obstacle in their development. In this review the research works in the field of residual stresses in thermoplastic composites is presented. First, a literature survey on the available research on residual stresses on thermoplastics and thermoplastic composites reinforced with short fibers is compiled. Moreover a review on the available research on residual stresses on thermoplastic composites reinforced with long fibers is presented as well. The effects of the residual stresses on these composites are discussed. Experimental techniques for the measurement of residual stresses in thermoplastic composites and the methods for reducing the existing residual stresses are studied.

  8. Ensemble Kalman filtering with residual nudging

    Directory of Open Access Journals (Sweden)

    Xiaodong Luo

    2012-10-01

    Full Text Available Covariance inflation and localisation are two important techniques that are used to improve the performance of the ensemble Kalman filter (EnKF by (in effect adjusting the sample covariances of the estimates in the state space. In this work, an additional auxiliary technique, called residual nudging, is proposed to monitor and, if necessary, adjust the residual norms of state estimates in the observation space. In an EnKF with residual nudging, if the residual norm of an analysis is larger than a pre-specified value, then the analysis is replaced by a new one whose residual norm is no larger than a pre-specified value. Otherwise, the analysis is considered as a reasonable estimate and no change is made. A rule for choosing the pre-specified value is suggested. Based on this rule, the corresponding new state estimates are explicitly derived in case of linear observations. Numerical experiments in the 40-dimensional Lorenz 96 model show that introducing residual nudging to an EnKF may improve its accuracy and/or enhance its stability against filter divergence, especially in the small ensemble scenario.

  9. Residu Fungisida Tembaga (Cu pada Pucuk Teh

    Directory of Open Access Journals (Sweden)

    Christanti Sumardiyono

    1996-12-01

    Full Text Available The study was done to know copper residue on tea due to blister blight control by copper fungicides. The experiment was done at Pagilaran Tea Plantation, Batang, Pekalongan. Tea plants were sprayed 8 times, with 8 days interval at the dosages of 0. 75, 150, and 300 g/ha respectively. Shoot sample was taken at 8 and 16 days after spraying. The copper residue war analyzed by Atomic Adsorbtion Spectrophotometer at 324 nm. The result showed that the higher dosage of spraying gives higher copper residue. At the dosage of 300 g/ha was detected 23,52 ppm of copper residue at 8 days after spraying. The residue was reduced to 12,96 ppm at 16 days after spraying. At that dosage the blister blight disease intensity reduced by 59,97%. The detected residue of copper fungicides due to blister blight control is not higher than MRL ( 150 ppm.

  10. Method for residual household waste composition studies.

    Science.gov (United States)

    Sahimaa, Olli; Hupponen, Mari; Horttanainen, Mika; Sorvari, Jaana

    2015-12-01

    The rising awareness of decreasing natural resources has brought forward the idea of a circular economy and resource efficiency in Europe. As a part of this movement, European countries have identified the need to monitor residual waste flows in order to make recycling more efficient. In Finland, studies on the composition of residual household waste have mostly been conducted using different methods, which makes the comparison of the results difficult. The aim of this study was to develop a reliable method for residual household waste composition studies. First, a literature review on European study methods was performed. Also, 19 Finnish waste composition studies were compared in order to identify the shortcomings of the current Finnish residual household waste composition data. Moreover, the information needs of different waste management authorities concerning residual household waste were studied through a survey and personal interviews. Stratification, sampling, the classification of fractions and statistical analysis were identified as the key factors in a residual household waste composition study. The area studied should be divided into non-overlapping strata in order to decrease the heterogeneity of waste and enable comparisons between different waste producers. A minimum of six subsamples, each 100 kg, from each stratum should be sorted. Confidence intervals for each waste category should be determined in order to evaluate the applicability of the results. A new three-level classification system was created based on Finnish stakeholders' information needs and compared to four other European waste composition study classifications. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Detecting organic gunpowder residues from handgun use

    Science.gov (United States)

    MacCrehan, William A.; Ricketts, K. Michelle; Baltzersen, Richard A.; Rowe, Walter F.

    1999-02-01

    The gunpowder residues that remain after the use of handguns or improvised explosive devices pose a challenge for the forensic investigator. Can these residues be reliably linked to a specific gunpowder or ammunition? We investigated the possibility by recovering and measuring the composition of organic additives in smokeless powder and its post-firing residues. By determining gunpowder additives such as nitroglycerin, dinitrotoluene, ethyl- and methylcentralite, and diphenylamine, we hope to identify the type of gunpowder in the residues and perhaps to provide evidence of a match to a sample of unfired powder. The gunpowder additives were extracted using an automated technique, pressurized fluid extraction (PFE). The conditions for the quantitative extraction of the additives using neat and solvent-modified supercritical carbon dioxide were investigated. All of the major gunpowder additives can be determined with baseline resolution using capillary electrophoresis (CE) with a micellar agent and UV absorbance detection. A study of candidate internal standards for use in the CE method is also presented. The PFE/CE technique is used to evaluate a new residue sampling protocol--asking shooters to blow their noses. In addition, an initial investigation of the compositional differences among unfired and post-fired .22 handgun residues is presented.

  12. Assessing the Availability of Wood Residues and Residue Markets in Virginia

    OpenAIRE

    Alderman, Delton R. Jr.

    1998-01-01

    A statewide mail survey of primary and secondary wood product manufacturers was undertaken to quantify the production and consumption of wood residues in Virginia. Two hundred and sixty-six wood product manufacturers responded to the study and they provided information on the production, consumption, markets, income or disposal costs, and disposal methods of wood residues. Hardwood and pine sawmills produce approximately 66 percent of Virginia's wood residues. Virginia's wood product man...

  13. A survey of residual analysis and a new test of residual trend.

    Science.gov (United States)

    McDowell, J J; Calvin, Olivia L; Klapes, Bryan

    2016-05-01

    A survey of residual analysis in behavior-analytic research reveals that existing methods are problematic in one way or another. A new test for residual trends is proposed that avoids the problematic features of the existing methods. It entails fitting cubic polynomials to sets of residuals and comparing their effect sizes to those that would be expected if the sets of residuals were random. To this end, sampling distributions of effect sizes for fits of a cubic polynomial to random data were obtained by generating sets of random standardized residuals of various sizes, n. A cubic polynomial was then fitted to each set of residuals and its effect size was calculated. This yielded a sampling distribution of effect sizes for each n. To test for a residual trend in experimental data, the median effect size of cubic-polynomial fits to sets of experimental residuals can be compared to the median of the corresponding sampling distribution of effect sizes for random residuals using a sign test. An example from the literature, which entailed comparing mathematical and computational models of continuous choice, is used to illustrate the utility of the test. © 2016 Society for the Experimental Analysis of Behavior.

  14. Sustainable System for Residual Hazards Management

    International Nuclear Information System (INIS)

    Kevin M. Kostelnik; James H. Clarke; Jerry L. Harbour

    2004-01-01

    Hazardous, radioactive and other toxic substances have routinely been generated and subsequently disposed of in the shallow subsurface throughout the world. Many of today's waste management techniques do not eliminate the problem, but rather only concentrate or contain the hazardous contaminants. Residual hazards result from the presence of hazardous and/or contaminated material that remains on-site following active operations or the completion of remedial actions. Residual hazards pose continued risk to humans and the environment and represent a significant and chronic problem that require continuous long-term management (i.e. >1000 years). To protect human health and safeguard the natural environment, a sustainable system is required for the proper management of residual hazards. A sustainable system for the management of residual hazards will require the integration of engineered, institutional and land-use controls to isolate residual contaminants and thus minimize the associated hazards. Engineered controls are physical modifications to the natural setting and ecosystem, including the site, facility, and/or the residual materials themselves, in order to reduce or eliminate the potential for exposure to contaminants of concern (COCs). Institutional controls are processes, instruments, and mechanisms designed to influence human behavior and activity. System failure can involve hazardous material escaping from the confinement because of system degradation (i.e., chronic or acute degradation) or by external intrusion of the biosphere into the contaminated material because of the loss of institutional control. An ongoing analysis of contemporary and historic sites suggests that the significance of the loss of institutional controls is a critical pathway because decisions made during the operations/remedial action phase, as well as decisions made throughout the residual hazards management period, are key to the long-term success of the prescribed system. In fact

  15. New applications of partial residual methodology

    International Nuclear Information System (INIS)

    Uslu, V.R.

    1999-12-01

    The formulation of a problem of interest in the framework of a statistical analysis starts with collecting the data, choosing a model, making certain assumptions as described in the basic paradigm by Box (1980). This stage is is called model building. Then the estimation stage is in order by pretending as if the formulation of the problem was true to obtain estimates, to make tests and inferences. In the final stage, called diagnostic checking, checking of whether there are some disagreements between the data and the model fitted is done by using diagnostic measures and diagnostic plots. It is well known that statistical methods perform best under the condition that all assumptions related to the methods are satisfied. However it is true that having the ideal case in practice is very difficult. Diagnostics are therefore becoming important so are diagnostic plots because they provide a immediate assessment. Partial residual plots that are the main interest of the present study are playing the major role among the diagnostic plots in multiple regression analysis. In statistical literature it is admitted that partial residual plots are more useful than ordinary residual plots in detecting outliers, nonconstant variance, and especially discovering curvatures. In this study we consider the partial residual methodology in statistical methods rather than multiple regression. We have shown that for the same purpose as in the multiple regression the use of partial residual plots is possible particularly in autoregressive time series models, transfer function models, linear mixed models and ridge regression. (author)

  16. Crop Residue Biomass Effects on Agricultural Runoff

    Directory of Open Access Journals (Sweden)

    Damodhara R. Mailapalli

    2013-01-01

    Full Text Available High residue loads associated with conservation tillage and cover cropping may impede water flow in furrow irrigation and thus decrease the efficiency of water delivery and runoff water quality. In this study, the biomass residue effects on infiltration, runoff, and export of total suspended solids (TSS, dissolved organic carbon (DOC, sediment-associated carbon (TSS-C, and other undesirable constituents such as phosphate (soluble P, nitrate (, and ammonium ( in runoff water from a furrow-irrigated field were studied. Furrow irrigation experiments were conducted in 91 and 274 m long fields, in which the amount of residue in the furrows varied among four treatments. The biomass residue in the furrows increased infiltration, and this affected total load of DOC, TSS, and TSS-C. Net storage of DOC took place in the long but not in the short field because most of the applied water ran off in the short field. Increasing field length decreased TSS and TSS-C losses. Total load of , , and soluble P decreased with increasing distance from the inflow due to infiltration. The concentration and load of P increased with increasing residue biomass in furrows, but no particular trend was observed for and . Overall, the constituents in the runoff decreased with increasing surface cover and field length.

  17. Characterization of bound residues in plants

    International Nuclear Information System (INIS)

    Stratton, G.D. Jr.; Wheeler, W.B.

    1986-01-01

    The characterization of unextractable (or 'bound') pesticide residues in plants can be difficult owing to the insoluble nature of the pesticide-plant complex. An unextractable residue can be defined as material derived from the applied pesticide which remains in the plant matrix after exhaustive organic solvent extraction. Experiments with a variety of pesticide classes in plants indicate that the level of unextractable residue varies with the plant species, the pesticide and the exposure time of the plant to the pesticide. Methods used in attempts to release 'bound' residues from solvent-extracted plant tissues include acid hydrolyses, enzymatic treatments and techniques of high-temperature distillation. These methods solubilize or release varying amounts of unextractable material; the amounts depend on the pesticide and on the extent to which the plant fibre is degraded. In experiments using radiolabelled dieldrin (1, 2, 3, 4, 10, 10-hexachloro-6, 7-epoxy-1, 4, 4a, 5, 6, 7, 8, 8a-octahydro-exo-1, 4-endo-5,6-dimethanonaphthalene), carbofuran (2,3-dihydro-2, 2-dimethylbenzofuran-7-yl methylcarbamate) and permethrin ([3-phenoxybenzyl(+-)-3-(2, 2-dichlorovinyl)-2, 2-dimethylcyclopropanecarboxylate]) in radishes, portions of the unextractable material solubilized by the above methods were identified as parent compound and/or closely related metabolites. The bioavailability and toxicological significance of unextractable pesticide residues need to be evaluated. (author)

  18. Reclamation of plutonium from pyrochemical processing residues

    International Nuclear Information System (INIS)

    Gray, L.W.; Gray, J.H.; Holcomb, H.P.; Chostner, D.F.

    1987-04-01

    Savannah River Laboratory (SRL), Savannah River Plant (SRP), and Rocky Flats Plant (RFP) have jointly developed a process to recover plutonium from molten salt extraction residues. These NaCl, KCL, and MgCl 2 residues, which are generated in the pyrochemical extraction of 241 Am from aged plutonium metal, contain up to 25 wt % dissolved plutonium and up to 2 wt % americium. The overall objective was to develop a process to convert these residues to a pure plutonium metal product and discardable waste. To meet this objective a combination of pyrochemical and aqueous unit operations was used. The first step was to scrub the salt residue with a molten metal (aluminum and magnesium) to form a heterogeneous ''scrub alloy'' containing nominally 25 wt % plutonium. This unit operation, performed at RFP, effectively separated the actinides from the bulk of the chloride salts. After packaging in aluminum cans, the ''scrub alloy'' was then dissolved in a nitric acid - hydrofluoric acid - mercuric nitrate solution at SRP. Residual chloride was separated from the dissolver solution by precipitation with Hg 2 (NO 3 ) 2 followed by centrifuging. Plutonium was then separated from the aluminum, americium and magnesium using the Purex solvent extraction system. The 241 Am was diverted to the waste tank farm, but could be recovered if desired

  19. Methods of measuring residual stresses in components

    International Nuclear Information System (INIS)

    Rossini, N.S.; Dassisti, M.; Benyounis, K.Y.; Olabi, A.G.

    2012-01-01

    Highlights: ► Defining the different methods of measuring residual stresses in manufactured components. ► Comprehensive study on the hole drilling, neutron diffraction and other techniques. ► Evaluating advantage and disadvantage of each method. ► Advising the reader with the appropriate method to use. -- Abstract: Residual stresses occur in many manufactured structures and components. Large number of investigations have been carried out to study this phenomenon and its effect on the mechanical characteristics of these components. Over the years, different methods have been developed to measure residual stress for different types of components in order to obtain reliable assessment. The various specific methods have evolved over several decades and their practical applications have greatly benefited from the development of complementary technologies, notably in material cutting, full-field deformation measurement techniques, numerical methods and computing power. These complementary technologies have stimulated advances not only in measurement accuracy and reliability, but also in range of application; much greater detail in residual stresses measurement is now available. This paper aims to classify the different residual stresses measurement methods and to provide an overview of some of the recent advances in this area to help researchers on selecting their techniques among destructive, semi destructive and non-destructive techniques depends on their application and the availabilities of those techniques. For each method scope, physical limitation, advantages and disadvantages are summarized. In the end this paper indicates some promising directions for future developments.

  20. Rare Earth Element Phases in Bauxite Residue

    Directory of Open Access Journals (Sweden)

    Johannes Vind

    2018-02-01

    Full Text Available The purpose of present work was to provide mineralogical insight into the rare earth element (REE phases in bauxite residue to improve REE recovering technologies. Experimental work was performed by electron probe microanalysis with energy dispersive as well as wavelength dispersive spectroscopy and transmission electron microscopy. REEs are found as discrete mineral particles in bauxite residue. Their sizes range from <1 μm to about 40 μm. In bauxite residue, the most abundant REE bearing phases are light REE (LREE ferrotitanates that form a solid solution between the phases with major compositions (REE,Ca,Na(Ti,FeO3 and (Ca,Na(Ti,FeO3. These are secondary phases formed during the Bayer process by an in-situ transformation of the precursor bauxite LREE phases. Compared to natural systems, the indicated solid solution resembles loparite-perovskite series. LREE particles often have a calcium ferrotitanate shell surrounding them that probably hinders their solubility. Minor amount of LREE carbonate and phosphate minerals as well as manganese-associated LREE phases are also present in bauxite residue. Heavy REEs occur in the same form as in bauxites, namely as yttrium phosphates. These results show that the Bayer process has an impact on the initial REE mineralogy contained in bauxite. Bauxite residue as well as selected bauxites are potentially good sources of REEs.

  1. Mobility of organic carbon from incineration residues

    International Nuclear Information System (INIS)

    Ecke, Holger; Svensson, Malin

    2008-01-01

    Dissolved organic carbon (DOC) may affect the transport of pollutants from incineration residues when landfilled or used in geotechnical construction. The leaching of dissolved organic carbon (DOC) from municipal solid waste incineration (MSWI) bottom ash and air pollution control residue (APC) from the incineration of waste wood was investigated. Factors affecting the mobility of DOC were studied in a reduced 2 6-1 experimental design. Controlled factors were treatment with ultrasonic radiation, full carbonation (addition of CO 2 until the pH was stable for 2.5 h), liquid-to-solid (L/S) ratio, pH, leaching temperature and time. Full carbonation, pH and the L/S ratio were the main factors controlling the mobility of DOC in the bottom ash. Approximately 60 weight-% of the total organic carbon (TOC) in the bottom ash was available for leaching in aqueous solutions. The L/S ratio and pH mainly controlled the mobilization of DOC from the APC residue. About 93 weight-% of TOC in the APC residue was, however, not mobilized at all, which might be due to a high content of elemental carbon. Using the European standard EN 13 137 for determination of total organic carbon (TOC) in MSWI residues is inappropriate. The results might be biased due to elemental carbon. It is recommended to develop a TOC method distinguishing between organic and elemental carbon

  2. Improved crop residue cover estimates by coupling spectral indices for residue and moisture

    Science.gov (United States)

    Remote sensing assessment of soil residue cover (fR) and tillage intensity will improve our predictions of the impact of agricultural practices and promote sustainable management. Spectral indices for estimating fR are sensitive to soil and residue water content, therefore, the uncertainty of estima...

  3. Geostatistical methods applied to field model residuals

    DEFF Research Database (Denmark)

    Maule, Fox; Mosegaard, K.; Olsen, Nils

    consists of measurement errors and unmodelled signal), and is typically assumed to be uncorrelated and Gaussian distributed. We have applied geostatistical methods to analyse the residuals of the Oersted(09d/04) field model [http://www.dsri.dk/Oersted/Field_models/IGRF_2005_candidates/], which is based......The geomagnetic field varies on a variety of time- and length scales, which are only rudimentary considered in most present field models. The part of the observed field that can not be explained by a given model, the model residuals, is often considered as an estimate of the data uncertainty (which...... on 5 years of Ørsted and CHAMP data, and includes secular variation and acceleration, as well as low-degree external (magnetospheric) and induced fields. The analysis is done in order to find the statistical behaviour of the space-time structure of the residuals, as a proxy for the data covariances...

  4. Residual strains in girth-welded linepipe

    International Nuclear Information System (INIS)

    MacEwen, S.R.; Holden, T.M.; Powell, B.M.; Lazor, R.B.

    1987-07-01

    High resolution neutron diffraction has been used to measure the axial residual strains in and adjacent to a multipass girth weld in a complete section of 914 mm (36 inches) diameter, 16 mm (5/8 inch) wall, linepipe. The experiments were carried out at the NRU reactor, Chalk River using the L3 triple-axis spectrometer. The through-wall distribution of axial residual strain was measured at 0, 4, 8, 20 and 50 mm from the weld centerline; the axial variation was determined 1, 5, 8, and 13 mm from the inside surface of the pipe wall. The results have been compared with strain gauge measurements on the weld surface and with through-wall residual stress distributions determined using the block-layering and removal technique

  5. Field Test Kit for Gun Residue Detection

    Energy Technology Data Exchange (ETDEWEB)

    WALKER, PAMELA K.; RODACY, PHILIP J.

    2002-01-01

    One of the major needs of the law enforcement field is a product that quickly, accurately, and inexpensively identifies whether a person has recently fired a gun--even if the suspect has attempted to wash the traces of gunpowder off. The Field Test Kit for Gunshot Residue Identification based on Sandia National Laboratories technology works with a wide variety of handguns and other weaponry using gunpowder. There are several organic chemicals in small arms propellants such as nitrocellulose, nitroglycerine, dinitrotoluene, and nitrites left behind after the firing of a gun that result from the incomplete combustion of the gunpowder. Sandia has developed a colorimetric shooter identification kit for in situ detection of gunshot residue (GSR) from a suspect. The test kit is the first of its kind and is small, inexpensive, and easily transported by individual law enforcement personnel requiring minimal training for effective use. It will provide immediate information identifying gunshot residue.

  6. Residual-strength determination in polymetric materials

    International Nuclear Information System (INIS)

    Christensen, R.M.

    1981-01-01

    Kinetic theory of crack growth is used to predict the residual strength of polymetric materials acted upon by a previous history. Specifically, the kinetic theory is used to characterize the state of growing damage that occurs under a constant-stress (load) state. The load is removed before failure under creep-rupture conditions, and the residual instantaneous strength is determined from the theory by taking account of the damage accumulation under the preceding constant-load history. The rate of change of residual strength is found to be strongest when the duration of the preceding load history is near the ultimate lifetime under that condition. Physical explanations for this effect are given, as are numerical examples. Also, the theoretical prediction is compared with experimental data

  7. Methyl bromide residues in fumigated cocoa beans

    International Nuclear Information System (INIS)

    Adomako, D.

    1975-01-01

    The 14 C activity in unroasted [ 14 C]-methyl bromide fumigated cocoa beans was used to study the fate and persistence of CH 3 Br in the stored beans. About 70% of the residues occurred in the shells. Unchanged CH 3 Br could not be detected, all the sorbed CH 3 Br having reacted with bean constituents apparently to form 14 C-methylated derivatives and inorganic bromide. No 14 C activity was found in the lipid fraction. Roasting decreased the bound (non-volatile) residues, with corresponding changes in the activities and amounts of free sugars, free and protein amino acids. Roasted nibs and shells showed a two-fold increase in the volatile fraction of the 14 C residue. This fraction may be related to the volatile aroma compounds formed by Maillard-type reactions. (author)

  8. Determination of Pesticide Residues in Cannabis Smoke

    Directory of Open Access Journals (Sweden)

    Nicholas Sullivan

    2013-01-01

    Full Text Available The present study was conducted in order to quantify to what extent cannabis consumers may be exposed to pesticide and other chemical residues through inhaled mainstream cannabis smoke. Three different smoking devices were evaluated in order to provide a generalized data set representative of pesticide exposures possible for medical cannabis users. Three different pesticides, bifenthrin, diazinon, and permethrin, along with the plant growth regulator paclobutrazol, which are readily available to cultivators in commercial products, were investigated in the experiment. Smoke generated from the smoking devices was condensed in tandem chilled gas traps and analyzed with gas chromatography-mass spectrometry (GC-MS. Recoveries of residues were as high as 69.5% depending on the device used and the component investigated, suggesting that the potential of pesticide and chemical residue exposures to cannabis users is substantial and may pose a significant toxicological threat in the absence of adequate regulatory frameworks.

  9. Bioenergy from agricultural residues in Ghana

    DEFF Research Database (Denmark)

    Thomsen, Sune Tjalfe

    and biomethane under Ghanaian conditions. Detailed characterisations of thirteen of the most common agricultural residues in Ghana are presented, enabling estimations of theoretical bioenergy potentials and identifying specific residues for future biorefinery applications. When aiming at residue-based ethanol...... to pursue increased implementation of anaerobic digestion in Ghana, as the first bioenergy option, since anaerobic digestion is more flexible than ethanol production with regard to both feedstock and scale of production. If possible, the available manure and municipal liquid waste should be utilised first....... A novel model for estimating BMP from compositional data of lignocellulosic biomasses is derived. The model is based on a statistical method not previously used in this area of research and the best prediction of BMP is: BMP = 347 xC+H+R – 438 xL + 63 DA , where xC+H+R is the combined content of cellulose...

  10. Assessing plant residue decomposition in soil using DRIFT spectroscopy

    Science.gov (United States)

    Ouellette, Lance; Van Eerd, Laura; Voroney, Paul

    2016-04-01

    Assessment of the decomposition of plant residues typically involves the use of tracer techniques combined with measurements of soil respiration. This laboratory study evaluated use of Diffuse Reflectance Fourier Transform (DRIFT) spectroscopy for its potential to assess plant residue decomposition in soil. A sandy loam soil (Orthic Humic Gleysol) obtained from a field research plot was passed through a 4.75 mm sieve moist (~70% of field capacity) to remove larger crop residues. The experimental design consisted of a randomized complete block with four replicates of ten above-ground cover crop residue-corn stover combinations, where sampling time was blocked. Two incubations were set up for 1) Drift analysis: field moist soil (250 g ODW) was placed in 500 mL glass jars, and 2) CO2 evolution: 100 g (ODW) was placed in 2 L jars. Soils were amended with the plant residues (oven-dried at 60°C and ground to <2 mm) at rates equivalent to field mean above-ground biomass yields, then moistened to 60% water holding capacity and incubated in the dark at 22±3°C. Measurements for DRIFT and CO2-C evolved were taken after 0.5, 2, 4, 7, 10, 15, 22, 29, 36, 43, 50 64 and 72 d. DRIFT spectral data (100co-added scans per sample) were recorded with a Varian Cary 660 FT-IR Spectrometer equipped with an EasiDiff Diffuse Reflectance accessory operated at a resolution of 4 cm-1 over the mid-infrared spectrum from 4000 to 400 cm-1. DRIFT spectra of amended soils indicated peak areas of aliphatics at 2930 cm-1, of aromatics at 1620, and 1530 cm-1 and of polysaccharides at 1106 and 1036 cm-1. Evolved CO2 was measured by the alkali trap method (1 M NaOH); the amount of plant residue-C remaining in soil was calculated from the difference in the quantity of plant residue C added and the additional CO2-C evolved from the amended soil. First-order model parameters of the change in polysaccharide peak area over the incubation were related to those generated from the plant residue C decay

  11. Mutational properties of amino acid residues: implications for evolvability of phosphorylatable residues

    DEFF Research Database (Denmark)

    Creixell, Pau; Schoof, Erwin M.; Tan, Chris Soon Heng

    2012-01-01

    in terms of their mutational activity. Moreover, we highlight the importance of the genetic code and physico-chemical properties of the amino acid residues as likely causes of these inequalities and uncover serine as a mutational hot spot. Finally, we explore the consequences that these different......; it is typically assumed that all amino acid residues are equally likely to mutate or to result from a mutation. Here, by reconstructing ancestral sequences and computing mutational probabilities for all the amino acid residues, we refute this assumption and show extensive inequalities between different residues...... mutational properties have on phosphorylation site evolution, showing that a higher degree of evolvability exists for phosphorylated threonine and, to a lesser extent, serine in comparison with tyrosine residues. As exemplified by the suppression of serine's mutational activity in phosphorylation sites, our...

  12. 40 CFR 180.564 - Indoxacarb; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Indoxacarb; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.564 Indoxacarb; tolerances for residues. (a) General. Tolerances are established for residues of...

  13. Feeding potential of summer grain crop residues for woolled sheep ...

    African Journals Online (AJOL)

    greater amounts than indicated in Table 2. Percentage utilization of residues. Using the values obtained from quadrat sampling of the residues before and after grazing, the percentage utilization of residue components could be estimated. The results are shown in Table 3. Table 3 Percentage utilization a of residues. Lupins.

  14. 40 CFR 180.176 - Mancozeb; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Mancozeb; tolerances for residues. 180... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.176 Mancozeb; tolerances for residues. (a) General. Tolerances for residues of a fungicide which is a...

  15. 40 CFR 180.324 - Bromoxynil; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Bromoxynil; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.324 Bromoxynil; tolerances for residues. (a) General. (1) Tolerances are established for residues...

  16. 40 CFR 180.314 - Triallate; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Triallate; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.314 Triallate; tolerances for residues. (a) General. Tolerances are established for residues of...

  17. 40 CFR 180.210 - Bromacil; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Bromacil; tolerances for residues. 180... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.210 Bromacil; tolerances for residues. (a) General. Tolerances are established for residues of the herbicide...

  18. 40 CFR 279.47 - Management of residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Management of residues. 279.47 Section... Management of residues. Transporters who generate residues from the storage or transport of used oil must manage the residues as specified in § 279.10(e). ...

  19. 40 CFR 180.298 - Methidathion; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Methidathion; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.298 Methidathion; tolerances for residues. (a) General. Tolerances are established for residues of...

  20. 40 CFR 180.299 - Dicrotophos; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Dicrotophos; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.299 Dicrotophos; tolerances for residues. (a) General. Tolerances are established for residues of...

  1. 40 CFR 180.227 - Dicamba; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Dicamba; tolerances for residues. 180... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.227 Dicamba; tolerances for residues. (a) General. (1) Tolerances are established for the combined residues of...

  2. 40 CFR 180.209 - Terbacil; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Terbacil; tolerances for residues. 180... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.209 Terbacil; tolerances for residues. (a) General. Tolerances are established for combined residues of the...

  3. 40 CFR 180.249 - Alachlor; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Alachlor; tolerances for residues. 180... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.249 Alachlor; tolerances for residues. (a) General. Tolerances are established for combined residues of...

  4. 40 CFR 180.128 - Pyrethrins; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Pyrethrins; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.128 Pyrethrins; tolerances for residues. (a) General. (1) Tolerances for residues of the...

  5. 40 CFR 279.67 - Management of residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Management of residues. 279.67 Section... for Energy Recovery § 279.67 Management of residues. Burners who generate residues from the storage or burning of used oil must manage the residues as specified in § 279.10(e). ...

  6. 40 CFR 180.208 - Benfluralin; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Benfluralin; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.208 Benfluralin; tolerances for residues. (a) General. Tolerances are established for residues of...

  7. 40 CFR 180.178 - Ethoxyquin; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Ethoxyquin; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.178 Ethoxyquin; tolerances for residues. (a) General. A tolerance is established for residues of...

  8. 40 CFR 180.241 - Bensulide; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Bensulide; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.241 Bensulide; tolerances for residues. (a) General. Tolerances are established for the residues...

  9. 40 CFR 180.263 - Phosalone; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Phosalone; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.263 Phosalone; tolerances for residues. (a) General. Tolerances are established for residues of...

  10. 40 CFR 180.258 - Ametryn; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Ametryn; tolerances for residues. 180... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.258 Ametryn; tolerances for residues. (a) General. Tolerances are established for residues of the desiccant...

  11. 40 CFR 180.213 - Simazine; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Simazine; tolerances for residues. 180... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.213 Simazine; tolerances for residues. (a) General. Tolerances are established for the combined residues of the...

  12. 40 CFR 180.269 - Aldicarb; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Aldicarb; tolerances for residues. 180... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.269 Aldicarb; tolerances for residues. (a) General. Tolerances are established for combined residues of the...

  13. 40 CFR 180.315 - Methamidophos; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Methamidophos; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.315 Methamidophos; tolerances for residues. (a) Tolerances are established for residues of the...

  14. 40 CFR 180.235 - Dichlorvos; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Dichlorvos; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.235 Dichlorvos; tolerances for residues. (a) General. (1) Tolerances for residues of the...

  15. 40 CFR 180.222 - Prometryn; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Prometryn; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.222 Prometryn; tolerances for residues. (a) General. Tolerances are established for residues of...

  16. 40 CFR 180.262 - Ethoprop; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Ethoprop; tolerances for residues. 180... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.262 Ethoprop; tolerances for residues. (a) General. Tolerances are established for residues of the nematocide...

  17. 40 CFR 279.59 - Management of residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Management of residues. 279.59 Section... Management of residues. Owners and operators who generate residues from the storage, processing, or re-refining of used oil must manage the residues as specified in § 279.10(e). ...

  18. 40 CFR 180.198 - Trichlorfon; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Trichlorfon; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.198 Trichlorfon; tolerances for residues. (a) General. Tolerances are established for residues of...

  19. 40 CFR 180.304 - Oryzalin; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Oryzalin; tolerances for residues. 180... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.304 Oryzalin; tolerances for residues. (a) General. Tolerances are established for residues of the herbicide...

  20. 40 CFR 180.169 - Carbaryl; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Carbaryl; tolerances for residues. 180... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.169 Carbaryl; tolerances for residues. (a) General. (1) Tolerances are established for residues of the...

  1. 40 CFR 180.220 - Atrazine; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Atrazine; tolerances for residues. 180... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.220 Atrazine; tolerances for residues. (a) General. Tolerances are established for the combined residues of the...

  2. 40 CFR 180.122 - Parathion; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Parathion; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.122 Parathion; tolerances for residues. (a) General. Tolerances are established for residues of...

  3. 40 CFR 180.200 - Dicloran; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Dicloran; tolerances for residues. 180... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.200 Dicloran; tolerances for residues. (a) General. (1) Tolerances are established for residues of the...

  4. 40 CFR 180.133 - Lindane; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Lindane; tolerances for residues. 180... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.133 Lindane; tolerances for residues. (a) General. Tolerances are established for residues of the insecticide...

  5. 40 CFR 180.328 - Napropamide; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Napropamide; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.328 Napropamide; tolerances for residues. (a) General. Tolerances are established for residues of...

  6. 40 CFR 180.132 - Thiram; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Thiram; tolerances for residues. 180... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.132 Thiram; tolerances for residues. (a) General. Tolerances are established for residues of the fungicide...

  7. 40 CFR 180.243 - Propazine; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Propazine; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.243 Propazine; tolerances for residues. Tolerances are established for negligible residues (N) of...

  8. 40 CFR 180.301 - Carboxin; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Carboxin; tolerances for residues. 180... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.301 Carboxin; tolerances for residues. (a) General. Tolerances are established for the combined residues of the...

  9. 51st North American Chemical Residue Workshop.

    Science.gov (United States)

    Yang, Paul; Martos, Perry; Barrett, Brad

    2015-06-03

    Manuscripts collected in this 51st North American Chemical Residue Workshop (NACRW) Symposium issue of the Journal of Agricultural and Food Chemistry (JAFC) were originally presented at the 51st NACRW meeting. The 2014 NACRW JAFC symposium collects 14 publications representing the broad range of topics in chemical analyses presented at the 2014 meeting. These include the analysis of chemical residues and contaminants in food, environment, feed, botanical, and bee samples as well as the application of quality control/quality assurance protocols in routine and method development.

  10. Residual generator for cardiovascular anomalies detection

    KAUST Repository

    Belkhatir, Zehor

    2014-06-01

    This paper discusses the possibility of using observer-based approaches for cardiovascular anomalies detection and isolation. We consider a lumped parameter model of the cardiovascular system that can be written in a form of nonlinear state-space representation. We show that residuals that are sensitive to variations in some cardiovascular parameters and to abnormal opening and closure of the valves, can be generated. Since the whole state is not easily available for measurement, we propose to associate the residual generator to a robust extended kalman filter. Numerical results performed on synthetic data are provided.

  11. Fate of leptophos residues in milk products

    International Nuclear Information System (INIS)

    Zayed, S.M.A.D.; Mohammed, S.I.

    1981-01-01

    The fate of leptophos residues in various milk products was studied using 14 C-phenyl labelled leptophos. Milk products were prepared from milk fortified with the radioactive insecticide by methods simulating those used in industry. The highest leptophos level was found in butter and the lowest in skim milk and whey. Analysis of the radioactive residues in all products showed the presence of leptophos alone. A trace of the oxon could be detected in whey. The results obtained in this investigation indicated that processing of milk did not affect the nature of leptophos to any appreciable extent. (author)

  12. Residual stress in Ni-W electrodeposits

    DEFF Research Database (Denmark)

    Mizushima, Io; Tang, Peter Torben; Hansen, Hans Nørgaard

    2006-01-01

    In the present work, the residual stress in Ni–W layers electrodeposited from electrolytes based on NiSO4 and Na2WO4, is investigated. Citrate, glycine and triethanolamine were used as complexing agents, enabling complex formation between the nickel ion and tungstate. The results show that the type...... of complexing agent and the current efficiency have an influence on the residual stress. In all cases, an increase in tensile stress in the deposit with time after deposition was observed. Pulse plating could improve the stress level for the electrolyte containing equal amounts of citrate...

  13. Fluidised-bed combustion of gasification residue

    Energy Technology Data Exchange (ETDEWEB)

    Korpela, T.; Kudjoi, A.; Hippinen, I.; Heinolainen, A.; Suominen, M.; Lu Yong [Helsinki Univ. of Technology (Finland). Lab of Energy Economics and Power Plant Engineering

    1996-12-01

    Partial gasification processes have been presented as possibilities for future power production. In the processes, the solid materials removed from a gasifier (i.e. fly ash and bed material) contain unburnt fuel and the fuel conversion is increased by burning this gasification residue either in an atmospheric or a pressurised fluidised-bed. In this project, which is a part of European JOULE 2 EXTENSION research programme, the main research objectives are the behaviour of calcium and sulphur compounds in solids and the emissions of sulphur dioxide and nitrogen oxides (NO{sub x} and N{sub 2}O) in pressurised fluidised-bed combustion of gasification residues. (author)

  14. Mechanically induced residual stresses: Modelling and characterisation

    Science.gov (United States)

    Stranart, Jean-Claude E.

    Accurate characterisation of residual stress represents a major challenge to the engineering community. This is because it is difficult to validate the measurement and the accuracy is doubtful. It is with this in mind that the current research program concerning the characterisation of mechanically induced residual stresses was undertaken. Specifically, the cold expansion of fastener holes and the shot peening treatment of aerospace alloys, aluminium 7075 and titanium Ti-6Al-4V, are considered. The objective of this study is to characterise residual stresses resulting from cold working using three powerful techniques. These are: (i) theoretical using three dimensional non-linear finite element modelling, (ii) semi-destructive using a modified incremental hole drilling technique and (iii) nondestructive using a newly developed guided wave method supplemented by traditional C-scan measurements. The three dimensional finite element results of both simultaneous and sequential cold expansion of two fastener holes revealed the importance of the separation distance, the expansion level and the loading history upon the development and growth of the plastic zone and unloading residual stresses. It further showed that the commonly adopted two dimensional finite element models are inaccurate and incapable of predicting these residual stresses. Similarly, the dynamic elasto-plastic finite element studies of shot peening showed that the depth of the compressed layer, surface and sub-surface residual stresses are significantly influenced by the shot characteristics. Furthermore, the results reveal that the separation distance between two simultaneously impacting shots governs the plastic zone development and its growth. In the semi-destructive incremental hole drilling technique, the accuracy of the newly developed calibration coefficients and measurement techniques were verified with a known stress field and the method was used to measure peening residual stresses. Unlike

  15. Some problems of residual activity measurements

    International Nuclear Information System (INIS)

    Katrik, P.; Mustafin, E.; Strasik, I.; Pavlovic, M.

    2013-01-01

    As a preparatory work for constructing the Facility for Antiproton and Ion Research (FAIR) at GSI Darmstadt, samples of copper were irradiated by 500 MeV/u 238 U ion beam and investigated by gamma-ray spectroscopy. The nuclides that contribute dominantly to the residual activity have been identified and their contributions have been quantified by two different methods: from the whole-target gamma spectra and by integration of depth-profiles of residual activity of individual nuclides. Results obtained by these two methods are compared and discussed in this paper. (authors)

  16. Residual water treatment for gamma radiation

    International Nuclear Information System (INIS)

    Mendez, L.

    1990-01-01

    The treatment of residual water by means of gamma radiation for its use in agricultural irrigation is evaluated. Measurements of physical, chemical, biological and microbiological contamination indicators were performed. For that, samples from the treatment center of residual water of San Juan de Miraflores were irradiated up to a 52.5 kGy dose. The study concludes that gamma radiation is effective to remove parasites and bacteria, but not for removal of the organic and inorganic matter. (author). 15 refs., 3 tabs., 4 figs

  17. Lindane residues in fish inhabiting Nigerian rivers

    International Nuclear Information System (INIS)

    Okereke, G.U.; Dje, Y.

    1997-01-01

    Analysis for residues of lindane in fish collected from various rivers close to rice agroecosystems showed that the concentrations of lindane ranged from none detectable to 3.4 mg kg -1 . Fish from rivers where strict regulations prohibits its use had no detectable lindane residues while appreciable amounts of lindane were found in fish were such restriction was not enforced with the variation attributed to the extent of use of lindane in the area of contamination. The investigation confirms that the use of lindane in rice production in Nigeria can cause the contamination of fish in nearby rivers. (author). 16 refs, 2 tab

  18. Residual radioactivity of treated green diamonds.

    Science.gov (United States)

    Cassette, Philippe; Notari, Franck; Lépy, Marie-Christine; Caplan, Candice; Pierre, Sylvie; Hainschwang, Thomas; Fritsch, Emmanuel

    2017-08-01

    Treated green diamonds can show residual radioactivity, generally due to immersion in radium salts. We report various activity measurements on two radioactive diamonds. The activity was characterized by alpha and gamma ray spectrometry, and the radon emanation was measured by alpha counting of a frozen source. Even when no residual radium contamination can be identified, measurable alpha and high-energy beta emissions could be detected. The potential health impact of radioactive diamonds and their status with regard to the regulatory policy for radioactive products are discussed. Copyright © 2017. Published by Elsevier Ltd.

  19. Residual energy applications program systems analysis report

    Energy Technology Data Exchange (ETDEWEB)

    Yngve, P.W.

    1980-10-01

    Current DOE plans call for building an Energy Applied Systems Test (EAST) Facility at the Savannah River Plant in close proximity to the 140 to 150/sup 0/F waste heat from one of several operating nuclear reactors. The waste water flow from each reactor, approximately 165,000 gpm, provides a unique opportunity to test the performance and operating characteristics of large-scale waste heat power generation and heat pump system concepts. This report provides a preliminary description of the potential end-use market, parametric data on heat pump and the power generation system technology, a preliminary listing of EAST Facility requirements, and an example of an integrated industrial park utilizing the technology to maximize economic pay back. The parametric heat pump analysis concluded that dual-fluid Rankine cycle heat pumps with capacities as high as 400 x 10/sup 6/ Btu/h, can utilize large sources of low temperature residual heat to provide 300/sup 0/F saturatd steam for an industrial park. The before tax return on investment for this concept is 36.2%. The analysis also concluded that smaller modular heat pumps could fulfill the same objective while sacrificing only a moderate rate of return. The parametric power generation analysis concluded that multi-pressure Rankine cycle systems not only are superior to single pressure systems, but can also be developed for large systems (approx. = 17 MW/sub e/). This same technology is applicable to smaller systems at the sacrifice of higher investment per unit output.

  20. Systems for harvesting and handling cotton plant residue

    Energy Technology Data Exchange (ETDEWEB)

    Coates, W. [Univ. of Arizona, Tucson, AZ (United States)

    1993-12-31

    In the warmer regions of the United States, cotton plant residue must be buried to prevent it from serving as an overwintering site for insect pests such as the pink bollworm. Most of the field operations used to bury the residue are high energy consumers and tend to degrade soil structure, thereby increasing the potential for erosion. The residue is of little value as a soil amendment and consequently is considered a negative value biomass. A commercial system to harvest cotton plant residue would be of both economic and environmental benefit to cotton producers. Research has been underway at the University of Arizona since the spring of 1991 to develop a commercially viable system for harvesting cotton plant residue. Equipment durability, degree of densification, energy required, cleanliness of the harvested material, and ease of product handling and transport are some of the performance variables which have been measured. Two systems have proven superior. In both, the plants are pulled from the ground using an implement developed specifically for the purpose. In one system, the stalks are baled using a large round baler, while in the other the stalks are chopped with a forage harvester, and then made into packages using a cotton module maker. Field capacities, energy requirements, package density and durability, and ease of handling with commercially available equipment have been measured for both systems. Selection of an optimum system for a specific operation depends upon end use of the product, and upon equipment availability.

  1. Management of industrial solid residues; Gerenciamento de residuos solidos industriais

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-07-01

    This chapter gives an overview on the management of industrial solid wastes, approaching the following subjects: classification of industrial solid residues; directives and methodologies for the management of industrial solid residues; instruments for the management of industrial solid residues; handling, packing, storage and transportation; treatment of industrial solid residues; final disposal - landfill for industrial residues; the problem of treatment and final disposer of domestic garbage in Brazil; recycling of the lubricant oils used in brazil; legislation.

  2. Risk-Based Approach to Developing National Residue Sampling Plan

    OpenAIRE

    Scientific Committee of the Food Safety Authority of Ireland

    2014-01-01

    A ranking system for veterinary medicinal products and medicated feed additives has been developed as a tool to be applied in a risk-based approach to the residue testing programme for foods of animal origin in the National Residue Control Plan. In the context of food sampling and residue testing for the National Residue Control Plan, there is firstly, the risk to human health from residues of chemical substances in food and secondly, the issue of non-compliance with regulations relating ...

  3. Proceedings of the 7. biennial residue-to-revenue residual wood conference 2007

    International Nuclear Information System (INIS)

    Raulin, J.

    2007-01-01

    This conference provided information on the highest and best use of residual wood, which is quickly becoming a valuable commodity. Issues concerning forest residues, sawmill wastes, agricultural residues and urban organic materials were discussed along with trends in Canadian surplus mill waste production. The evolving nature and technologies of the biomass business were highlighted with particular focus on how to generate energy and save money through the use of residual wood. Residual wood energy projects and developments in Canada, North America and Europe were outlined along with biomass development in relation to forest fires and insect disturbances. Cogeneration technologies using wood wastes for thermal heat, steam and electricity were also presented, along with transportation fuel technologies for the production of ethanol. It was noted that with the rising cost of energy, the forest industry is seeking energy solutions based on the use of residual wood. The range of economically practical residual wood solutions continues to grow as energy prices increase. The conference was attended by more than 200 delegates from the forest industry, suppliers and government representatives, to discuss policies and procedures currently in place. Industry investment is being stimulated by the potential for biofuels and biochemicals, as well as the co-operation between the forest and energy sectors. The conference featured 23 presentations, of which 12 have been catalogued separately for inclusion in this database. refs., tabs., figs

  4. Residual Momentum and Reversal Strategies Revisited

    NARCIS (Netherlands)

    J.J. Huij (Joop); S.D. Lansdorp (Simon)

    2017-01-01

    textabstractIn this note we revisit the 2011 and 2013 papers of Blitz, Huij, and Martens (BHM2011), and Blitz, Huij, Lansdorp, and Verbeek (BHLV2013) in which momentum and reversal strategies on residual returns are proposed. Our results indicate that the main findings of these studies, that

  5. Recovery of silver residues from dental amalgam.

    Science.gov (United States)

    Pereira, Heloísa Aparecida Barbosa da Silva; Iano, Flávia Godoy; da Silva, Thelma Lopes; de Oliveira, Rodrigo Cardoso; de Menezes, Manoel Lima; Buzalaf, Marília Afonso Rabelo

    2010-01-01

    Dental amalgam residues are probably the most important chemical residues generated from clinical dental practice because of the presence of heavy metals among its constituents, mainly mercury and silver. The purpose of this study was to develop an alternative method for the recovery of silver residues from dental amalgam. The residue generated after vacuum distillation of dental amalgam for the separation of mercury was initially diluted with 32.5% HNO3, followed by precipitation with 20% NaCl. Sequentially, under constant heating and agitation with NaOH and sucrose, the sample was reduced to metallic silver. However, the processing time was too long, which turned this procedure not viable. In another sequence of experiments, the dilution was accomplished with concentrated HNO3 at 90 degrees C, followed by precipitation with 20% NaCl. After washing, the pellet was diluted with concentrated NH4OH, water and more NaCl in order to facilitate the reaction with the reducer. Ascorbic acid was efficiently used as reducer, allowing a fast reduction, thus making the procedure viable. The proposed methodology is of easy application and does not require sophisticated equipment or expensive reagents.

  6. Recovery of silver residues from dental amalgam

    Directory of Open Access Journals (Sweden)

    Heloísa Aparecida Barbosa da Silva Pereira

    2010-04-01

    Full Text Available Dental amalgam residues are probably the most important chemical residues generated from clinical dental practice because of the presence of heavy metals among its constituents, mainly mercury and silver. OBJECTIVE: The purpose of this study was to develop an alternative method for the recovery of silver residues from dental amalgam. MATERIAL AND METHODS: The residue generated after vacuum distillation of dental amalgam for the separation of mercury was initially diluted with 32.5% HNO3, followed by precipitation with 20% NaCl. Sequentially, under constant heating and agitation with NaOH and sucrose, the sample was reduced to metallic silver. However, the processing time was too long, which turned this procedure not viable. In another sequence of experiments, the dilution was accomplished with concentrated HNO3 at 90ºC, followed by precipitation with 20% NaCl. After washing, the pellet was diluted with concentrated NH4OH, water and more NaCl in order to facilitate the reaction with the reducer. RESULTS: Ascorbic acid was efficiently used as reducer, allowing a fast reduction, thus making the procedure viable. CONCLUSIONS: The proposed methodology is of easy application and does not require sophisticated equipment or expensive reagents.

  7. Agrochemicals and Residues Newsletter. No. 6

    International Nuclear Information System (INIS)

    1991-09-01

    This newsletter provides very brief summaries of the current coordinated research programs and of the completed coordinated research program on the study of the biological activity and bioavailability of bound pesticide residues using nuclear techniques (a more complete report will be published in the IAEA Panel Proceedings series). Research in progress at the Agrochemicals Unit of the IAEA Laboratory in Seibersdorf is also described

  8. The measurement of residual stresses in claddings

    International Nuclear Information System (INIS)

    Hofer, G.; Bender, N.

    1978-01-01

    The ring core method, a variation of the hole drilling method for the measurement of biaxial residual stresses, has been extended to measure stresses from depths of about 5 to 25mm. It is now possible to measure the stress profiles of clad material. Examples of measured stress profiles are shown and compared with those obtained with a sectioning technique. (author)

  9. EFFECTS OF MUCUNA ( MUCUNA UTILIS L.) RESIDUE ...

    African Journals Online (AJOL)

    The field experiment was conducted at two locations: University of Agriculture, Abeokuta (UNAAB) and Olowo-Papa (OP) in Ogun state both in Forest-savannah transition zone of Nigeria to investigate the response of three upland rice cultivars (O.sativa) to mucuna residue incorporation and Nitrogen (N) fertilizer and the ...

  10. Preliminary characterization of residual biomass from Hibiscus ...

    African Journals Online (AJOL)

    Hibiscus sabdariffa calyces are mainly used for different agro-food and beverages applications. The residual biomass generated contains various useful substances that were extracted and characterized. It contained 23% (w/w) soluble pectic material, a food additive, extracted with hot acidified water (80°C, pH = 1.5) and ...

  11. Formulation of morning product using food residues

    Directory of Open Access Journals (Sweden)

    Maria do Rosário de Fátima Padilha

    2017-09-01

    Full Text Available In Brazil, there is resistance of the population to the use of stalks, leaves, peels and seeds of vegetables and fruits, leading to trash important parts of the food in good physiological conditions and with the presence of potential nutrients. In this research, a morning product was elaborated using green and dry coconut residue, jerimum and melon seed, crystallized sicilian lemon peel, cashew nut, common rapadura sweet and ginger. The bacteriological tests proved the hygienic-sanitary quality of the product, therefore suitable for consumption, that is, according to RDC 12/2001. It was also observed that the dehydration of all the residues reached the legal levels and accepted by ANVISA that limits in 25% the water content in the dehydrated foods. As for the centesimal composition, it was observed that the elaborated product with residues and other ingredients had a good content of macro nutrients. A use of the type of waste as a new food proposal constitutes an alternative to avoid and reduce: the serious environmental problem caused by the large residual volume generated, and the inadequate places in which they are stored or deposited, aggravating the scenario of food-borne pollutants.

  12. QA/QC in pesticide residue analysis

    International Nuclear Information System (INIS)

    Ambrus, A.

    2002-01-01

    This paper outlines problems related to pesticide residue analysis in a regulatory laboratory that are related to: availability of reference materials, as over 1000 pesticide active ingredients are currently in use and over 400 crops represent a large part of a healthy diet; analysis time; availability of samples in sufficient numbers; uncertainties of the procedures

  13. Regulatory framework for NORM residues in Belgium

    Energy Technology Data Exchange (ETDEWEB)

    Pepin, S.; Dehandschutter, B.; Poffijn, A.; Sonck, M. [Federal Agency for Nuclear Control (FANC), Rue Ravenstein 36, 1000 Brussels (Belgium)

    2013-07-01

    The Belgian radiation protection authority (Federal Agency for Nuclear Control - FANC) has published in March 2013 a decree regulating the acceptance of NORM residues by nonradioactive waste treatment facilities. This regulation is based on the concept of 'work activities involving natural radiation sources' in the sense of article 40 of the 96/29/EURATOM directive. The disposal or processing facilities which accept NORM residues with an activity concentration above a generic exemption level will be considered as 'work activities' and submitted to declaration according to the Belgian radiation protection regulations. On basis of this declaration, specific acceptance criteria for the different types of processing/ disposal of the residues (disposal on landfill, recycling into building materials, etc.) are imposed. FANC has drafted guidelines for these acceptance criteria. A methodological guide for the operators of the concerned facilities was also published. Moreover, sites where significant quantities of NORM residues are or have been disposed, are subjected to an environmental monitoring in the framework of the national program of radiological surveillance of FANC. FANC also introduced in its regulations the concept of anthropogenic radon-prone areas: e.g. former phosphogypsum stacks have been defined as anthropogenic radon-prone areas, which allows some form of regulatory control of these sites. (authors)

  14. Untreated Hemangiomas : Growth Pattern and Residual Lesions

    NARCIS (Netherlands)

    Bauland, Constantijn G.; Luning, Thomas H.; Smit, Jeroen M.; Zeebregts, Clark J.; Spauwen, Paul H. M.

    Background: Hemangiomas of infancy can give rise to alarm because of their rapid growth and occasional dramatic appearance. The objective of this study was to investigate the growth pattern of hemangiomas and risk factors for residual lesions. Methods: A follow-up study was performed of patients

  15. Corn residue removal and CO2 emissions

    Science.gov (United States)

    Carbon dioxide (CO2), nitrous oxide (N2O), and methane (CH4) are the primary greenhouse gases (GHG) emitted from the soil due to agricultural activities. In the short-term, increases in CO2 emissions indicate increased soil microbial activity. Soil micro-organisms decompose crop residues and release...

  16. Transportation of vitrified residues towards Switzerland

    International Nuclear Information System (INIS)

    2002-01-01

    This document presents the swiss policy concerning the spent fuel management and the participation of COGEMA to the spent fuel processing. In this framework the swiss spent fuel processing at COGEMA La Hague, the transports safety and management, the regulatory framework applied to the transports, the quality and safety control and the ultimate residues storage are presented. (A.L.B.)

  17. RESIDU management in spruiten 2009 : eindrapportage

    NARCIS (Netherlands)

    Mooijaart, A.; Oers, van C.; Vlaswinkel, M.E.T.

    2009-01-01

    Een aantal afzetkanalen, supermarkten stelt sinds een aantal jaren bovenwettelijke eisen mbt residu in spruiten. Om te onderzoeken of door een betere keuze van middelen het mogelijk was om aan deze eis te voldoend is er in 2008 een blokkenproef aangelegd op PPO locatie Westmaas. De resultaten van

  18. Residual stresses in cold drawn ferritic rods

    International Nuclear Information System (INIS)

    Atienza, J.M.; Martinez-Perez, M.L.; Ruiz-Hervias, J.; Mompean, F.; Garcia-Hernandez, M.; Elices, M.

    2005-01-01

    The residual stress state generated by cold-drawing in a ferritic steel rod has been determined. Stress profiles in the three principal directions were measured by neutron and X-ray diffraction and calculated by 3D finite element simulation. The agreement between the simulations and the experimental data is excellent

  19. Residual strength evaluation of concrete structural components ...

    Indian Academy of Sciences (India)

    to failure. It is of interest to characterize the material behaviour subjected to such loading and study the crack propagation, remaining life and residual strength resulting from such loading. The current approaches used to evaluate fatigue performance of concrete members are mainly empirical. Fatigue equations based on ...

  20. Contaminant transport at a waste residue deposit

    DEFF Research Database (Denmark)

    Engesgaard, Peter Knudegaard; Traberg, Rikke

    1996-01-01

    Contaminant transport in an aquifer at an incinerator waste residue deposit in Denmark is simulated. A two-dimensional, geochemical transport code is developed for this purpose and tested by comparison to results from another code, The code is applied to a column experiment and to the field site...

  1. The Finite Embeddability Property for Residuated Groupoids

    Czech Academy of Sciences Publication Activity Database

    Haniková, Zuzana; Horčík, Rostislav

    2014-01-01

    Roč. 72, č. 1 (2014), s. 1-13 ISSN 0002-5240 R&D Projects: GA ČR GAP202/11/1632 Institutional support: RVO:67985807 Keywords : residuated groupoid * distributive lattice * finite embeddability property Subject RIV: BA - General Mathematics Impact factor: 0.442, year: 2014

  2. Minimal Varieties of Representable Commutative Residuated Lattices

    Czech Academy of Sciences Publication Activity Database

    Horčík, Rostislav

    2012-01-01

    Roč. 100, č. 6 (2012), s. 1063-1078 ISSN 0039-3215 R&D Projects: GA ČR GAP202/10/1826 Institutional research plan: CEZ:AV0Z10300504 Keywords : commutative residuated lattice * subvariety lattice * minimal variety * substructural logic * maximally consistent logic Subject RIV: BA - General Mathematics Impact factor: 0.342, year: 2012

  3. Recent advances in residual stress measurement

    International Nuclear Information System (INIS)

    Withers, P.J.; Turski, M.; Edwards, L.; Bouchard, P.J.; Buttle, D.J.

    2008-01-01

    Until recently residual stresses have been included in structural integrity assessments of nuclear pressure vessels and piping in a very primitive manner due to the lack of reliable residual stress measurement or prediction tools. This situation is changing the capabilities of newly emerging destructive (i.e. the contour method) and non-destructive (i.e. magnetic and high-energy synchrotron X-ray strain mapping) residual stress measurement techniques for evaluating ferritic and austenitic pressure vessel components are contrasted against more well-established methods. These new approaches offer the potential for obtaining area maps of residual stress or strain in welded plants, mock-up components or generic test-pieces. The mapped field may be used directly in structural integrity calculations, or indirectly to validate finite element process/structural models on which safety cases for pressurised nuclear systems are founded. These measurement methods are complementary in terms of application to actual plant, cost effectiveness and measurements in thick sections. In each case an exemplar case study is used to illustrate the method and to highlight its particular capabilities

  4. Residual strength evaluation of concrete structural components ...

    Indian Academy of Sciences (India)

    This paper presents methodologies for residual strength evaluation of concrete structural components using linear elastic and nonlinear fracture mechanics principles. The effect of cohesive forces due to aggregate bridging has been represented mathematically by employing tension softening models. Various tension ...

  5. Valorization of Furfural Residue by Hydrothermal Carbonization

    DEFF Research Database (Denmark)

    Yue, Fen; Zhang, Jia; Pedersen, Christian Marcus

    2017-01-01

    Furfural residue (FR) is a low-cost by-product generated in the furfural production from corncobs, which is mainly composed of cellulose and lignin. In this report, hydrothermal carbonization (HTC) of deashed FR was conducted at various reaction temperatures (200, 220 and 240 °C) and reaction tim...

  6. Thermal Adsorption Processing Of Hydrocarbon Residues

    Directory of Open Access Journals (Sweden)

    Sudad H. Al.

    2017-04-01

    Full Text Available The raw materials of secondary catalytic processes must be pre-refined. Among these refining processes are the deasphalting and demetallization including their thermo adsorption or thermo-contact adsorption variety. In oil processing four main processes of thermo-adsorption refining of hydrocarbon residues are used ART Asphalt Residual Treating - residues deasphaltizing 3D Discriminatory Destructive Distillation developed in the US ACT Adsorption-Contact Treatment and ETCC Express Thermo-Contact Cracking developed in Russia. ART and ACT are processes with absorbers of lift type reactor while 3D and ETCC processes are with an adsorbing reactor having ultra-short contact time of the raw material with the adsorbent. In all these processes refining of hydrocarbon residues is achieved by partial Thermo-destructive transformations of hydrocarbons and hetero-atomic compounds with simultaneous adsorption of the formed on the surface of the adsorbents resins asphaltene and carboids as well as metal- sulphur - and nitro-organic compounds. Demetallized and deasphalted light and heavy gas oils or their mixtures are a quality raw material for secondary deepening refining processes catalytic and hydrogenation cracking etc. since they are characterized by low coking ability and low content of organometallic compounds that lead to irreversible deactivation of the catalysts of these deepening processes.

  7. Chlorinated pesticide residues in marine sediments

    Digital Repository Service at National Institute of Oceanography (India)

    Sarkar, A.; SenGupta, R.

    of pesticide in contaminated river water into the Bay of Bengal. Con centration ranges of all these pesticide residues detected were, aldrine: 0.02-0.53, gamma BHC: 0.01-0.21, dieldrine: 0.05-0.51, and total DDT: 0.02-0.78, all in mu g g sup(-1) (wet wt)....

  8. Residual thermal stresses in injection moulded products

    NARCIS (Netherlands)

    Zoetelief, W.F.; Douven, L.F.A.; Ingen Housz, A.J.; Ingen housz, A.J.

    1996-01-01

    Nonisothermal flow of a polymer melt in a cold mold cavity introduces stresses that are partly frozen-in during solidification. Flow-induced stresses cause anisotropy of mechanical, thermal, and optical properties, while the residual thermal stresses induce warpage and stress-cracking. In this

  9. Spatial resolution enhancement residual coding using hybrid ...

    Indian Academy of Sciences (India)

    tecture. The first stage makes use of a pre-trained dictionary to get a sparse representation of the residuals. .... developed by BBC and aimed at a royalty-free, open technology (Dirac video codec [online]. http://diracvideo.org/. ... quantization and context adaptive arithmetic coding (Dirac specification version 2.2.3 [online].

  10. Projections and residues on manifolds with boundary

    DEFF Research Database (Denmark)

    Gaarde, Anders Borg

    2008-01-01

    It is a well-known result that the noncommutative residue of a pseudodifferential projection is zero on a compact manifold without boundary. Equivalently, the value of the zeta-function of P at zero, ¿¿(P, 0), is independent of ¿ for any elliptic operator P. Here ¿ denotes the angle of a ray where...... the resolvent of P has minimal growth. In this thesis, we consider the analogous questions on a compact manifold with boundary. We show that the noncommutative residue is zero for any projection in Boutet de Monvel’s calculus of pseudodifferential boundary problems. For an elliptic boundary problem {P+ + G, T...... }, with the corresponding realization B = (P + G)T, we de¿ne the sectorial projection ¿¿,¿(B) and the residue of this projection. We discuss whether this residue is always zero, through various analyses of the structure of the pro jection. The question is interesting since ¿¿(B, 0) is independent of ¿ exactly when...

  11. Satellite Magnetic Residuals Investigated With Geostatistical Methods

    DEFF Research Database (Denmark)

    Fox Maule, Chaterine; Mosegaard, Klaus; Olsen, Nils

    2005-01-01

    The geomagnetic field varies on a variety of time- and length scales, which are only rudimentarily considered in most present field models. The part of the observed field that cannot be explained by a given model, the model residuals, is often considered as an estimate of the data uncertainty (wh...

  12. Fungicide and insecticide residues in rice grains

    Directory of Open Access Journals (Sweden)

    Gustavo Mack Teló

    2017-01-01

    Full Text Available The objective of this study was to analyse residues of fungicides and insecticides in rice grains that were subjected to different forms of processing. Field work was conducted during three crop seasons, and fungicides and insecticides were applied at different crop growth stages on the aerial portion of the rice plants. Azoxystrobin, difenoconazole, propiconazole, tebuconazole, and trifloxystrobin fungicides were sprayed only once at the R2 growth stage or twice at the R2 and R4 growth stages; cypermethrin, lambda-cyhalothrin, permethrin, and thiamethoxam insecticides were sprayed at the R2 growth stage; and permethrin was sprayed at 5-day intervals from the R4 growth stage up to one day prior to harvest. Pesticide residues were analysed in uncooked, cooked, parboiled, polished and brown rice grains as well as rice hulls during the three crop seasons, for a total of 1458 samples. The samples were analysed by gas chromatography with electron capture detection (GC-ECD using modified QuEChERS as the extraction method. No fungicide or insecticide residues were detected in rice grain samples; however, azoxystrobin and cypermethrin residues were detected in rice hull samples.

  13. Antibiotic Residues - A Global Health Hazard

    Directory of Open Access Journals (Sweden)

    Nisha A.R.

    Full Text Available Use of Antibiotic that might result in deposition of residues in meat, milk and eggs must not be permitted in food intended for human consumption. If use of antibiotics is necessary as in prevention and treatment of animal diseases, a withholding period must be observed until the residues are negligible or no longer detected. The use of antibiotics to bring about improved performance in growth and feed efficiency, to synchronize or control of reproductive cycle and breeding performance also often lead to harmful residual effects. Concern over antibiotic residues in food of animal origin occurs in two times; one which produces potential threat to direct toxicity in human, second is whether the low levels of antibiotic exposure would result in alteration of microflora, cause disease and the possible development of resistant strains which cause failure of antibiotic therapy in clinical situations. A withdrawal period is established to safeguard human from exposure of antibiotic added food. The withdrawal time is the time required for the residue of toxicological concern to reach safe concentration as defined by tolerance. It is the interval from the time an animal is removed from medication until permitted time of slaughter. Heavy responsibility is placed on the veterinarian and livestock producer to observe the period for a withdrawal of a drug prior to slaughter to assure that illegal concentration of drug residue in meat, milk and egg do not occur. Use of food additives may improve feed efficiency 17% in beef cattle, 10% in lambs, 15% in poultry and 15% in swine. But their indiscriminate use will produce toxicity in consumers. WHO and FAO establish tolerances for a drug, pesticide or other chemical in the relevant tissues of food producing animals. The tolerance is the tissue concentration below, which a marker residue for the drug or chemical must fall in the target tissue before that animal edible tissues are considered safe for human

  14. Intraoperative neuromuscular monitoring site and residual paralysis.

    Science.gov (United States)

    Thilen, Stephan R; Hansen, Bradley E; Ramaiah, Ramesh; Kent, Christopher D; Treggiari, Miriam M; Bhananker, Sanjay M

    2012-11-01

    Residual paralysis is common after general anesthesia involving administration of neuromuscular blocking drugs (NMBDs). Management of NMBDs and reversal is frequently guided by train-of-four (TOF) monitoring. We hypothesized that monitoring of eye muscles is associated with more frequent residual paralysis than monitoring at the adductor pollicis. This prospective cohort study enrolled 180 patients scheduled for elective surgery with anticipated use of NMBDs. Collected variables included monitoring site, age, gender, weight, body mass index, American Society of Anesthesiologists physical status class, type and duration of surgery, type of NMBDs, last and total dose administered, TOF count at time of reversal, dose of neostigmine, and time interval between last dose of NMBDs to quantitative measurement. Upon postanesthesia care unit admission, we measured TOF ratios by acceleromyography at the adductor pollicis. Residual paralysis was defined as a TOF ratio less than 90%. Multivariable logistic regression was used to account for unbalances between the two groups and to adjust for covariates. 150 patients received NMBDs and were included in the analysis. Patients with intraoperative TOF monitoring of eye muscles had significantly greater incidence of residual paralysis than patients monitored at the adductor pollicis (P paralysis was observed in 51/99 (52%) and 11/51 (22%) of patients, respectively. The crude odds ratio was 3.9 (95% CI: 1.8-8.4), and the adjusted odds ratio was 5.5 (95% CI: 2.1-14.5). Patients having qualitative TOF monitoring of eye muscles had a greater than 5-fold higher risk of postoperative residual paralysis than those monitored at the adductor pollicis.

  15. Residual stresses of water-jet peened austenitic stainless steel

    International Nuclear Information System (INIS)

    Suzuki, Kenji; Shobu, Takahisa; Shiro, Ayumi

    2013-01-01

    The specimen material was austenitic stainless steel, SUS316L. The residual stress was induced by water-jet peening. The residual stress was measured using the 311 diffraction with conventional X-rays. The measured residual stress showed the equi-biaxial stress state. To investigate thermal stability of the residual stress, the specimen was aged thermally at 773K in air to 1000h. The residual stress kept the equi-biaxial stress state against the thermal aging. Lattice plane dependency of the residual stress induced by water-jet peening was evaluated using hard synchrotron X-rays. The residual stress measured by the soft lattice plane showed the equi-biaxial stress state, but the residual stress measured by the hard lattice plane did not. In addition, the distributions of the residual stress in the depth direction were measured using a strain scanning method with hard synchrotron X-rays and neutrons. (author)

  16. Thermal analysis of an enriched flame incinerator for aqueous residues

    Energy Technology Data Exchange (ETDEWEB)

    Lacava, Pedro Teixeira; Pimenta, Amilcar Porto [Divisao de Engenharia Aeronautica, Instituto Tecnologico de Aeronautica, Pca. Mal. Eduardo Gomes, 50, Vila das Acacias, 12228-900, Sao Jose dos Campos, SP (Brazil); Carvalho, Joao A. [Departamento de Energia, Campus de Guaratingueta, Universidade Estadual Paulista, Av. Dr. Ariberto Pereira da Cunha, 333, 12516-410, Guaratingueta, SP (Brazil); Ferreira, Marco Aurelio [Laboratorio Associado de Combustao e Propulsao, Instituto Nacional de Pesquisas Espaciais, Rod. Presidente Dutra, km 40, 12630-000, Cachoeira Paulista, SP (Brazil)

    2006-03-01

    The use of oxygen to enrich the combustion air can be an attractive technique to increase capacity of an incinerator originally designed to operate with air. If incinerator parameters such as operation temperature, turbulence level and residence time are fixed for a certain fuel supply rate, it is possible to increase the residue consumption rate using enriched air. This paper presents the thermal analysis for operation with enriched air of an aqueous residue experimental incinerator. The auxiliary fuel was diesel oil. The theoretical results showed that there is a considerable increase in the incineration ratio up to approximately 50% of O{sub 2} in the oxidiser. The tendency was confirmed experimentally. Thermal analysis was demonstrated to be an important tool to predict possible incinerator capacity increase. (author)

  17. Turning wood residues into wood revenues

    International Nuclear Information System (INIS)

    Graham, R.G.; Kravetz, Don

    1996-01-01

    Ensyn is a profitable commercial company which derives its revenues from the conversion of wood residues into liquid biofuel and chemicals. The technology, Rapid Thermal Processing (RTP (TM) )is based on extremely fast ''cracking'' of biomass which results in light liquid yields exceeding 70% by weight, from wood. Whether producing chemicals or liquid biofuel, the RTP plant is configured identically and operated essentially in the same mode. Chemicals production simply allows economical production to occur at a lower plant capacity, as low as 2 tonnes/day, than is feasible for a dedicated fuel plant (typically greater than 100 tonnes/day). Ensyn has developed the commercialisation of RTP TM from bench to industrial scale in 10 years. A variety of crative funding initiatives in the early years allowed for capital to be raised for R and D without the loss of intellectual property (IP). The transition years of technology demonstration, prior to full commercialisation, were funded by a blend of revenues from venture capital and public sources, and by quickly tapping into a niche market for RTP TM . The utilisation of the technology at the niche market scale opened the doors to the larger fuel and commodity markets. Once, again, both IP and control of the company were maintained during these years. Flexibility, creativity and expertise are necessary to understand the significance of various financing options (private investments, commercial banking and bond issues) and to integrate these options with various renewable energy, recycling and tax incentives. Understanding these options with various renewable energy, recycling and tax incentives is necessary. Understanding both the core and peripheral needs of the customer are essential in successfully advancing a commercial wood energy venture. Ensyn's experience in these areas is the focus of the paper. (Author)

  18. Influence of organic waste and residue mud additions on chemical, physical and microbial properties of bauxite residue sand.

    Science.gov (United States)

    Jones, Benjamin E H; Haynes, Richard J; Phillips, Ian R

    2011-02-01

    In an alumina refinery, bauxite ore is treated with sodium hydroxide at high temperatures and pressures and for every tone of alumina produced, about 2 tones of alkaline, saline bauxite processing waste is also produced. At Alcoa, a dry stacking system of disposal is used, and it is the sand fraction of the processing waste that is rehabilitated. There is little information available regarding the most appropriate amendments to add to the processing sand to aid in revegetation. The purpose of this study was to investigate how the addition of organic wastes (biosolids and poultry manure), in the presence or absence of added residue mud, would affect the properties of the residue sand and its suitability for revegetation. Samples of freshly deposited residue sand were collected from Alcoa's Kwinana refinery. Samples were treated with phosphogypsum (2% v/v), incubated, and leached. A laboratory experiment was then set up in which the two organic wastes were applied at 0 or the equivalent to 60 tones ha(-1) in combination with residue mud added at rates of 0%, 10% and 20% v/v. Samples were incubated for 8 weeks, after which, key chemical, physical and microbial properties of the residue sand were measured along with seed germination. Additions of residue mud increased exchangeable Na(+), ESP and the pH, and HCO (3) (-) and Na(+) concentrations in saturation paste extracts. Additions of biosolids and poultry manure increased concentrations of extractable P, NH (4) (+) , K, Mg, Cu, Zn, Mn and Fe. Addition of residue mud, in combination with organic wastes, caused a marked decrease in macroporosity and a concomitant increase in mesoporosity, available water holding capacity and the quantity of water held at field capacity. With increasing residue mud additions, the percentage of sample present as sand particles (2 mm diameter) increased; greatest aggregation occurred where a combination of residue mud and poultry manure were added. Stability of aggregates, as measured by

  19. Testing the efficiency of extraction of incurred residues from soil with optimized multi-residue method.

    Science.gov (United States)

    Suszter, Gabriella K; Ambrus, Árpád

    2017-08-03

    The reproducibility of extraction of residues from spiked soil samples and from soils containing incurred residues was tested with 14 C-labeled test compounds of different physical-chemical properties. Nearly 100% of the compounds added to the sample before extraction could be recovered with an average reproducibility relative standard deviation (CV) of 5.4%. The additional steps of the determination process (cleanup, evaporation, etc.) contributed to the major part of the variability of the results (CV = 10-20%). The incurred residues were most efficiently extracted with acetone for 30 min followed by the mixture of acetone/ethyl acetate 1:1 for additional 30 min. However, they could only be recovered at various extent (64-90% of total residues), underlying the importance of testing the efficiency of extraction. The residues were identified and quantified by gas chromatography applying thermionic detector. The performance parameters of the method complied with the international method validation guidelines, and they proved to be robust and suitable for determination of pesticide residues in soils of widely different physical-chemical properties.

  20. On the parametrization of the Δ residue function

    International Nuclear Information System (INIS)

    Vasan, S.S.

    1976-01-01

    The complex residues at the Δ(1236) and Δ(1950) poles in the relevant partial-wave amplitudes provide information on the behaviour of the Δ Regge residue function in the resonance region u>0. Attempts to incorporate this information in parametrizations of the residue by functions that are real on the real u-axis result in residues which have unsatisfactory behaviour in the region u 2 . The choice of complex functions for the trajectory and residue removes this undesirable feature and provides a better representation of the residue in the resonance region, suggesting that complex parametrizations would be better suited to Regge analyses of near-backward scattering. (Auth.)

  1. Isotopic tracer aided studies of fenvalerate residues in stored rice

    International Nuclear Information System (INIS)

    Varca, L.M.; Sanchez, T.E.; Magallona, E.D.

    1990-01-01

    Following application of 14 C-fenvalerate to milled rice and paddy rice at a concentration of 0.33 mg/kg, only insignificant losses were measured after 9 months. Distribution patterns in surface, methanol extractable and bound residues were studied. Paddy rice contained less extractable residues than milled rice, with the major part being found in the husk. Bound residues in both milled and paddy rice decreased also with length of storage; as much as 30% was found as bound residues after nine months. Cooking reduced the insecticide residues in milled rice by 33-40% and residues in paddy rice by 58%. (author). 8 refs, 1 fig., 4 tabs

  2. Effects of twin-screw extrusion on soluble dietary fibre and physicochemical properties of soybean residue.

    Science.gov (United States)

    Jing, Yan; Chi, Yu-Jie

    2013-06-01

    Extrusion cooking technology was applied for soluble dietary fibre extraction from soybean residue. Response surface methodology (RSM) was used to optimise the effects of extrusion parameters, namely extrusion temperature (90-130°C), feed moisture (25-35%) and screw speed (160-200 rpm) on the content of soluble dietary fibre. According to the regression coefficients significance of the quadratic polynomial model, the optimum extrusion parameters were as follows: extrusion temperature, 115°C; feed moisture, 31%; and screw speed, 180 rpm. Under these conditions, the soluble dietary fibre content of soybean residue could reach to 12.65% which increased 10.60% compared with the unextruded soybean residue. In addition, the dietary fibre in extrude soybean residue had higher water retention capacity, oil retention capacity and swelling capacity than those of dietary fibre in unextruded soybean residue. Copyright © 2012 Elsevier Ltd. All rights reserved.

  3. Alkali activation processes for incinerator residues management.

    Science.gov (United States)

    Lancellotti, Isabella; Ponzoni, Chiara; Barbieri, Luisa; Leonelli, Cristina

    2013-08-01

    Incinerator bottom ash (BA) is produced in large amount worldwide and in Italy, where 5.1 millionstons of municipal solid residues have been incinerated in 2010, corresponding to 1.2-1.5 millionstons of produced bottom ash. This residue has been used in the present study for producing dense geopolymers containing high percentage (50-70 wt%) of ash. The amount of potentially reactive aluminosilicate fraction in the ash has been determined by means of test in NaOH. The final properties of geopolymers prepared with or without taking into account this reactive fraction have been compared. The results showed that due to the presence of both amorphous and crystalline fractions with a different degree of reactivity, the incinerator BA geopolymers exhibit significant differences in terms of Si/Al ratio and microstructure when reactive fraction is considered. Copyright © 2013 Elsevier Ltd. All rights reserved.

  4. Residual stress measurement by neutron diffraction

    International Nuclear Information System (INIS)

    Akita, Koichi; Suzuki, Hiroshi

    2010-01-01

    Neutron diffraction method has great advantages, allowing us to determine the residual stress deep present within the bulk materials and components nondestructively. Therefore, the method has been applied to confirm the structural integrity of the actual mechanical components and structures and to improve the manufacturing process and strength reliability of the products. This article reviews the residual stress measurement methodology of neutron diffraction. It also refers to the appropriate treatments of diffraction plane, stress-free lattice spacing, coarse grain and surface error to obtain reliable results. Finally, a few applications are introduced to show the capabilities of the neutron stress measurement method for the studies on the strength and elasto-plastic behaviors of crystalline materials. (author)

  5. Adaptive residual DPCM for lossless intra coding

    Science.gov (United States)

    Cai, Xun; Lim, Jae S.

    2015-03-01

    In the Differential Pulse-code Modulation (DPCM) image coding, the intensity of a pixel is predicted as a linear combination of a set of surrounding pixels and the prediction error is encoded. In this paper, we propose the adaptive residual DPCM (ARDPCM) for intra lossless coding. In the ARDPCM, intra residual samples are predicted using adaptive mode-dependent DPCM weights. The weights are estimated by minimizing the Mean Squared Error (MSE) of coded data and they are synchronized at the encoder and the decoder. The proposed method is implemented on the High Efficiency Video Coding (HEVC) reference software. Experimental results show that the ARDPCM significantly outperforms HEVC lossless coding and HEVC with the DPCM. The proposed method is also computationally efficient.

  6. Handling of wet residues in industry

    DEFF Research Database (Denmark)

    Villanueva, Alejandro

    to water bodies and uses of such bodies, distance to available agricultural land, characteristics of the local wastewater treatment plant, local and national legislation, or availability of subsidies. This study uses as example the geographical, legislative, economic and social boundary conditions......In countries with high prices of fresh water use and wastewater discharge, water recycling has become an alternative to traditional water consumption and discharge for industries with water-based processes. Industrial water recycling means in many cases that water has to be treated and cleaned......, to remove from it the substances which presence impedes reusing the water. These substances accumulate in a by-product called wet residue. An integral part of water recycling projects in the industry is the handling and disposal of the wet residues generated. The treatment, utilisation and disposal of wet...

  7. Persistence of malathion residues in stored wheat

    International Nuclear Information System (INIS)

    Farghaly, M.; Zayed, S.M.A.D.

    1990-01-01

    The persistence of succinate- 14 C-malathion in stored wheat was investigated under local conditions during a storage period of 32 weeks. The insecticide penetrated readily into the seed and up to 16% of the applied dose was found to be bound after 32 weeks in storage. Total terminal residues declined to 9.3 and 21.0 mg/kg from initially applied doses of 12.2 and 24.4 mg/kg respectively. A small percentage of malaoxon was detected only during the early weeks after treatment (3-5%). Malathion was the major constituent of the extractable residues. In addition, seven degradation products were detected and identified. (author). 6 refs, 2 figs, 2 tabs

  8. [Waste over history: perceptions about residues].

    Science.gov (United States)

    Velloso, Marta Pimenta

    2008-01-01

    This article describes how Man, over history, felt about the residues produced by human activity. The text is divided into three parts: In the first part it tells the story of the black plague pandemic during the XIV century, showing how this disease was associated with the residues produced by the human body. In the second part it explains how the first notions of waste were, and still are, related to dirt, disease and death. Finally, in the third part, it describes the first measures of hygiene in the Renaissance and refers to the first public health actions at the beginning of the XX century, starting to combat the agents of infectious diseases and their vectors.

  9. Characterization of briquettes produced with agroforestry residues

    Directory of Open Access Journals (Sweden)

    Ananias Francisco Dias Júnior

    2014-09-01

    Full Text Available The objective of the present was to characterize the quality of briquettes produced with fines of vegetable coal and bamboo residues, under different formulations. Specific gravity density, bulk density mass, moisture content and speed or rate of thermic degradation were evaluated. Compressive strength and rotation test were applied to the briquettes. Superior and inferior calorific values from briquettes were estimate by adjusted equations. Briquettes produced with the highest percentages of vegetable coal fines presented higher specific gravity, bulk density, ash content and fixed carbon. It also presented resistance to fall and abrasion. Briquettes with higher bamboo residues content presented faster degradation, higher compressive strength, beyond higher volatile matters and calorific value.

  10. Sun drying of residual annatto seed powder

    Directory of Open Access Journals (Sweden)

    Dyego da Costa Santos

    2015-01-01

    Full Text Available Residual annatto seeds are waste from bixin extraction in the food, pharmaceutical and cosmetic industries. Most of this by-product is currently discarded; however, the use of these seeds in human foods through the elaboration of powder added to other commercial powders is seen as a viable option. This study aimed at drying of residual annatto powder, with and without the oil layer derived from the industrial extraction of bixin, fitting different mathematical models to experimental data and calculating the effective moisture diffusivity of the samples. Powder containing oil exhibited the shortest drying time, highest drying rate (≈ 5.0 kg kg-1 min-1 and highest effective diffusivity (6.49 × 10-12 m2 s-1. All mathematical models assessed were a suitable representation of the drying kinetics of powders with and without oil, with R2 above 0.99 and root mean square error values lower than 1.0.

  11. HDHPLUS/SHP : heavy residue hydroconversion technology

    Energy Technology Data Exchange (ETDEWEB)

    Morel, F. [Axens, Rueil Malmaison (France)

    2009-07-01

    This presentation described an integrated refinery process that achieves nearly full conversion of heavy and refractory residues into ultra high quality and ultra low sulphur transportation fuels with a yield great than 100 volume per cent. The Axens, IFP and Intevep/PDVSA Alliance combined the HDHPLUS vacuum residue slurry technology with Sequential Hydro Processing (SHP) of primary hydrocracked products. Both technologies have undergone extensive testing at a refinery in Puerto La Cruz (RPLC), Venezuela to begin production of 50,000 BPSD in 2012. The demonstration unit at Intevep has been used to investigate production of effluent for the downstream SHP processing. This paper also reviewed the SHP bench unit operations at IFP's Lyon research center in France and disclosed the final product yields and qualities. The test results have shown the expected RPLC deep conversion commercial unit performances and fully secure its design basis. tabs., figs.

  12. European experience in transport/storage cask for vitrified residues

    International Nuclear Information System (INIS)

    Otton, Camille; Sicard, Damien

    2007-01-01

    Available in abstract form only. Full text of publication follows: Because of the evolution of burnup of spent fuel to be reprocessed, the high activity vitrified residues would not be transported in the existing cask designs. Therefore, TN International has decided in the late nineties to develop a brand new design of casks with optimized capacity able to store and transport the most active and hottest canisters: the TN TM 81 casks currently in use in Switzerland and the TN TM 85 cask which shall permit in the near future in Germany the storage and the transport of the most active vitrified residues defining a thermal power of 56 kW (kilowatts). The challenges for the TN TM 81 and TN TM 85 cask designs were that the geometry entry data were very restrictive and were combined with a fairly wide range set by the AREVA NC Specification relative to vitrified residue canister. The TN TM 81 and the TN TM 85 casks have been designed to fully anticipate shipment constraints of the present vitrified residue production. It also used the feedback of current shipments and the operational constraints and experience of receiving and shipping facilities. The casks had to fit as much as possible in the existing procedures for the already existing flasks such as the TN TM 28 cask and TS 28 V cask, all along the logistics chain of loading, unloading, transport and maintenance. (authors)

  13. Fate and Transport of Colloidal Energetic Residues

    Science.gov (United States)

    2015-07-01

    field) images of (b) a single and (c) an aggregated particle in the experimental solution . .............................................. 19  Figure...84  vii ACRONYM LIST ARW artificial rainwater °C degree Celsius cm centimeter d day DNX hexahydro-1,3-dinitroso-5- nitro ...munition constituents. This size fraction of residues had not been studied in any detail, yet it represents the most mobile and most rapidly

  14. Efficient Coding of the Prediction Residual.

    Science.gov (United States)

    1979-12-27

    DPCM ) with an adaptive quantizer and an adaptive predictor using Kalman filtering. This work was improved upon by Cohn and Melsa [15] using adaptive...with an encoding method of Adaptive Delta Modulation (ADM) and an experimental method of encoding the residual by DPCM . This is referred to as a...S. "Digital Coding of Speech Waveforms - PCM, DPCM and OM Quantizers." Proceedings of the IEEE, Vol. 62, No. 5 (1974), 611-632. (110) Tribolet, J. M

  15. Sedentary behavior and residual-specific mortality

    OpenAIRE

    Paul D. Loprinzi; Meghan K. Edwards; Eveleen Sng; Ovuokerie Addoh

    2016-01-01

    Background: The purpose of this study was to examine the association of accelerometer-assessed sedentary behavior and residual-specific mortality. Methods: Data from the 2003-2006 National Health and Nutrition Examination Survey (NHANES) were used (N = 5536), with follow-up through 2011. Sedentary behavior was objectively measured over 7 days via accelerometry. Results: When expressing sedentary behavior as a 60 min/day increase, the hazard ratio across the models ranged from 1.07-1.40 (P < 0...

  16. Residual stress distribution in extruded polypropylene pipes

    Czech Academy of Sciences Publication Activity Database

    Poduška, Jan; Kučera, J.; Hutař, Pavel; Ševčík, Martin; Křivánek, J.; Sadílek, J.; Náhlík, Luboš

    2014-01-01

    Roč. 2014, č. 40 (2014), s. 88-98 ISSN 0142-9418 R&D Projects: GA ČR(CZ) GAP108/12/1560 Institutional support: RVO:68081723 Keywords : polypropylene * extruded polymer pipe * residual stress * curved beam methodology * numerical simulations Subject RIV: JL - Materials Fatigue, Friction Mechanics Impact factor: 2.240, year: 2014 http://www.sciencedirect.com/science/article/pii/S0142941814001809

  17. Properties of residuals for spatial point processes

    DEFF Research Database (Denmark)

    Baddeley, A.; Møller, Jesper; Pakes, A.G.

    For any point process in $R^d$ that has a Papangelou conditional intensity $lambda$, we define a random measure of ‘innovations’ which has mean zero. When the point process model parameters are estimated from data, there is an analogous random measure of ‘residuals’. We analyse properties of the ...... of the innovations and residuals, including first and second moments, conditional independence, a martingale property, lack of correlation, and marginal distributions....

  18. Residual Stresses and Other Properties of Teardrops

    Energy Technology Data Exchange (ETDEWEB)

    Stroud, Mary Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Veirs, Douglas Kirk [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Berg, John M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Hill, Mary Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Rios, Daniel [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Duque, Juan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-07-26

    The Department of Energy’s 3013 Standard for packaging plutonium-bearing materials for storage up to fifty years specifies a minimum of two individually welded, nested containers herein referred to as the 3013 outer and the 3013 inner.1 Stress corrosion cracking (SCC) is a potential failure mechanism for 3013 inner containers.2,3 The bagless transfer container (BTC), a 3013 inner container used by Hanford and Savanna River Site (SRS) made from 304L stainless steel (SS), poses the greatest concern for SCC.4,5 The Surveillance and Monitoring Program (SMP) use stressed metal samples known as teardrops as screening tools in SCC studies to evaluate factors that could result in cracks in the 3013 containers.6,7 This report provides background information on the teardrops used in the Los Alamos National Laboratory (LANL) SMP studies including method of construction, composition and variability. In addition, the report discusses measurements of residual stresses in teardrops and compares the results with residual stresses in BTCs reported previously.4 Factors affecting residual stresses, including teardrop dimensions and surface finish, are also discussed.

  19. Advanced new technologies for residue upgrading

    International Nuclear Information System (INIS)

    Gillis, D.

    1997-01-01

    Viewgraphs summarizing UOP technologies for residue are provided. The upgrading technologies include: (1) Aquaconversion, (2) the Discriminatory Destructive Distillation process (3D), and (3) the RCD uniflex process. The Aquaconversion process is based on catalytic hydrovisbreaking. It makes use of a homogeneous (liquid phase) catalyst. The hydrogen is derived from water. The advantages of this process are improved residue stability and quality at higher conversion levels, high synthetic crude yields, low operational complexity, reduced transportation costs. The 3D process is a unique carbon rejection contaminant removal process which can process whole crudes through viscous residues. FCC type equipment is used. Performance characteristics and advantages of the process were highlighted. The RCD uniflex process makes use of proven fixed bed and ebullated bed technologies in a new process configuration in which the fixed bed system is located upstream of the ebullated bed system. In this process, the catalyst volume increases exponentially with increasing processing severity. Performance characteristics, design features, benefits and development progress to date are described. 1 tab., 21 figs

  20. Detection of Gunshot Residues Using Mass Spectrometry

    Directory of Open Access Journals (Sweden)

    Regina Verena Taudte

    2014-01-01

    Full Text Available In recent years, forensic scientists have become increasingly interested in the detection and interpretation of organic gunshot residues (OGSR due to the increasing use of lead- and heavy metal-free ammunition. This has also been prompted by the identification of gunshot residue- (GSR- like particles in environmental and occupational samples. Various techniques have been investigated for their ability to detect OGSR. Mass spectrometry (MS coupled to a chromatographic system is a powerful tool due to its high selectivity and sensitivity. Further, modern MS instruments can detect and identify a number of explosives and additives which may require different ionization techniques. Finally, MS has been applied to the analysis of both OGSR and inorganic gunshot residue (IGSR, although the “gold standard” for analysis is scanning electron microscopy with energy dispersive X-ray microscopy (SEM-EDX. This review presents an overview of the technical attributes of currently available MS and ionization techniques and their reported applications to GSR analysis.

  1. Elemental quantification of large gunshot residues

    International Nuclear Information System (INIS)

    Duarte, A.; Silva, L.M.; Souza, C.T. de; Stori, E.M.; Boufleur, L.A.; Amaral, L.

    2015-01-01

    In the present work we embarked on the evaluation of the Sb/Pb, Ba/Pb and Sb/Ba elemental ratios found in relatively large particles (of the order of 50–150 μm across) ejected in the forward direction when a gun is fired. These particles are commonly referred to as gunshot residues (GSR). The aim of this work is to compare the elemental ratios of the GSR with those found in the primer of pristine cartridges in order to check for possible correlations. To that end, the elemental concentration of gunshot residues and the respective ammunition were investigated through PIXE (Particle-Induced X-ray Emission) and micro-PIXE techniques. The ammunition consisted of a .38 SPL caliber (ogival lead type) charged in a Taurus revolver. Pristine cartridges were taken apart for the PIXE measurements. The shooting sessions were carried out in a restricted area at the Forensic Institute at Porto Alegre. Residues ejected at forward directions were collected on a microporous tape. The PIXE experiments were carried out employing 2.0 MeV proton beams with a beam spot size of 1 mm 2 . For the micro-PIXE experiments, the samples were irradiated with 2.2 MeV proton beams of 2 × 2 μm 2 . The results found for the ratios of Sb/Pb, Ba/Pb and Sb/Ba do not correlate with those stemming from the analysis of the primer

  2. Elemental quantification of large gunshot residues

    Energy Technology Data Exchange (ETDEWEB)

    Duarte, A. [Ion Implantation Laboratory, Institute of Physics, Federal University of Rio Grande do Sul, Av. Bento Gonçalves 9500, P.O. Box 15051, CEP 91501-970 Porto Alegre, RS (Brazil); Graduate Program on Materials Science, Federal University of Rio Grande do Sul, Av. Bento Gonçalves 9500, CEP 91540-000 Porto Alegre, RS (Brazil); Silva, L.M. [Ion Implantation Laboratory, Institute of Physics, Federal University of Rio Grande do Sul, Av. Bento Gonçalves 9500, P.O. Box 15051, CEP 91501-970 Porto Alegre, RS (Brazil); Graduate Program on Materials Science, Federal University of Rio Grande do Sul, Av. Bento Gonçalves 9500, CEP 91540-000 Porto Alegre, RS (Brazil); Forensic Institute of Porto Alegre, Av. Princesa Isabel 1056, CEP 90230-010 Porto Alegre, RS (Brazil); Souza, C.T. de; Stori, E.M. [Ion Implantation Laboratory, Institute of Physics, Federal University of Rio Grande do Sul, Av. Bento Gonçalves 9500, P.O. Box 15051, CEP 91501-970 Porto Alegre, RS (Brazil); Boufleur, L.A. [Ion Implantation Laboratory, Institute of Physics, Federal University of Rio Grande do Sul, Av. Bento Gonçalves 9500, P.O. Box 15051, CEP 91501-970 Porto Alegre, RS (Brazil); Graduate Program on Materials Science, Federal University of Rio Grande do Sul, Av. Bento Gonçalves 9500, CEP 91540-000 Porto Alegre, RS (Brazil); Amaral, L. [Ion Implantation Laboratory, Institute of Physics, Federal University of Rio Grande do Sul, Av. Bento Gonçalves 9500, P.O. Box 15051, CEP 91501-970 Porto Alegre, RS (Brazil); and others

    2015-04-01

    In the present work we embarked on the evaluation of the Sb/Pb, Ba/Pb and Sb/Ba elemental ratios found in relatively large particles (of the order of 50–150 μm across) ejected in the forward direction when a gun is fired. These particles are commonly referred to as gunshot residues (GSR). The aim of this work is to compare the elemental ratios of the GSR with those found in the primer of pristine cartridges in order to check for possible correlations. To that end, the elemental concentration of gunshot residues and the respective ammunition were investigated through PIXE (Particle-Induced X-ray Emission) and micro-PIXE techniques. The ammunition consisted of a .38 SPL caliber (ogival lead type) charged in a Taurus revolver. Pristine cartridges were taken apart for the PIXE measurements. The shooting sessions were carried out in a restricted area at the Forensic Institute at Porto Alegre. Residues ejected at forward directions were collected on a microporous tape. The PIXE experiments were carried out employing 2.0 MeV proton beams with a beam spot size of 1 mm{sup 2}. For the micro-PIXE experiments, the samples were irradiated with 2.2 MeV proton beams of 2 × 2 μm{sup 2}. The results found for the ratios of Sb/Pb, Ba/Pb and Sb/Ba do not correlate with those stemming from the analysis of the primer.

  3. Determination of maleic hydrazide residues in onion

    Directory of Open Access Journals (Sweden)

    Bursić Vojislava

    2010-01-01

    Full Text Available A simple HPLC determination method of maleic hydrazide residues in onions was introduced. The homogenized onion samples were extracted with methanol. The crude ex- tract was purified on SPE SampliQ SCX column. The maleic hydrazide was analyzed by HPLC with UV detection of 313 nm. The HPLC separation was performed on SynChropak Q column with 0.25 M phosphate buffer as the mobile phase. The recoveries of maleic hydrazide from the spiked onions with 1.5, 2.0, 3.0, 5.0, 7.0 and 10.0 mg ml-1, ranged from 89-103%. The detection limit of maleic hydrazide was 0.4 mg ml-1, and the quantification limit was 1.25 mg ml-1. The linearity coefficient was 0.9998. Such an optimized method was applied to the determination of residue content of maleic hydrazide in onions, treated with Royal MH-30 in the amount of 8.0 and 12.0 l ha-1. The samples were analysed after 8, 16 and 25 days from the moment of spraying. The obtained values of maleic hydrazide residues were below the maximum tolerable amount in the Republic of Serbia (10 mg kg-1, as well as the amount regulated by the EU (15 mg kg-1. .

  4. Identifying Functional Cysteine Residues in the Mitochondria.

    Science.gov (United States)

    Bak, Daniel W; Pizzagalli, Mattia D; Weerapana, Eranthie

    2017-04-21

    The mitochondria are dynamic organelles that regulate oxidative metabolism and mediate cellular redox homeostasis. Proteins within the mitochondria are exposed to large fluxes in the surrounding redox environment. In particular, cysteine residues within mitochondrial proteins sense and respond to these redox changes through oxidative modifications of the cysteine thiol group. These oxidative modifications result in a loss in cysteine reactivity, which can be monitored using cysteine-reactive chemical probes and quantitative mass spectrometry (MS). Analysis of cell lysates treated with cysteine-reactive probes enable the identification of hundreds of cysteine residues, however, the mitochondrial proteome is poorly represented (proteins and suppression of mitochondrial peptide MS signals by highly abundant cytosolic peptides. Here, we apply a mitochondrial isolation and purification protocol to substantially increase coverage of the mitochondrial cysteine proteome. Over 1500 cysteine residues from ∼450 mitochondrial proteins were identified, thereby enabling interrogation of an unprecedented number of mitochondrial cysteines. Specifically, these mitochondrial cysteines were ranked by reactivity to identify hyper-reactive cysteines with potential catalytic and regulatory functional roles. Furthermore, analyses of mitochondria exposed to nitrosative stress revealed previously uncharacterized sites of protein S-nitrosation on mitochondrial proteins. Together, the mitochondrial cysteine enrichment strategy presented herein enables detailed characterization of protein modifications that occur within the mitochondria during (patho)physiological fluxes in the redox environment.

  5. Residual extrapolation operators for efficient wavefield construction

    KAUST Repository

    Alkhalifah, Tariq Ali

    2013-02-27

    Solving the wave equation using finite-difference approximations allows for fast extrapolation of the wavefield for modelling, imaging and inversion in complex media. It, however, suffers from dispersion and stability-related limitations that might hamper its efficient or proper application to high frequencies. Spectral-based time extrapolation methods tend to mitigate these problems, but at an additional cost to the extrapolation. I investigate the prospective of using a residual formulation of the spectral approach, along with utilizing Shanks transform-based expansions, that adheres to the residual requirements, to improve accuracy and reduce the cost. Utilizing the fact that spectral methods excel (time steps are allowed to be large) in homogeneous and smooth media, the residual implementation based on velocity perturbation optimizes the use of this feature. Most of the other implementations based on the spectral approach are focussed on reducing cost by reducing the number of inverse Fourier transforms required in every step of the spectral-based implementation. The approach here fixes that by improving the accuracy of each, potentially longer, time step.

  6. Leaching from municipal solid waste incineration residues

    Energy Technology Data Exchange (ETDEWEB)

    Hyks, J.

    2008-02-15

    Leaching of pollutants from Municipal Solid Waste Incineration (MSWI) residues has been investigated combining a range of laboratory leaching experiments with geochemical modeling. Special attention was paid to assessing the applicability of laboratory data for subsequent modeling with respect to presumed full-scale conditions; both sample pretreatment and actual influence of leaching conditions on the results of laboratory experiments were considered. It was shown that sample pretreatment may have large impact on leaching test data. In particular, a significant fraction of Pb was shown mobile during the washing of residues with water. In addition, drying of residues (i.e. slow oxidation) prior to leaching experiments increased the leaching of Cr significantly. Significant differences regarding the leaching behavior of individual elements with respect to (non)equilibrium conditions in column percolation experiments were observed in the study. As a result, three groups of elements were identified based on the predominant leaching control and the influence of (non)equilibrium on the results of the laboratory column experiments: I. Predominantly availability-controlled elements (e.g. Na, K, Cl) II. Solubility-controlled elements (e.g. Ca, S, Si, Al, Ba, and Zn) III. Complexation-controlled elements (e.g. Cu and Ni) With respect to the above groups it was suggested that results of laboratory column experiments can, with consideration, be used to estimate full-scale leaching of elements from Group I and II. However, in order to avoid large underestimations in the assessment of leaching from Group III, it is imperative to describe the time-dependent transport of dissolved organic carbon (DOC) in the tested system or to minimize the physical non-equilibrium during laboratory experiments (e.g. bigger column, slower flow velocity). Forward geochemical modeling was applied to simulate long-term release of elements from a MSWI air-pollution-control residue. Leaching of a

  7. (DDT) and hexachlorohexane (HCH) pesticide residues in foodstuffs ...

    African Journals Online (AJOL)

    Dichloro-diphenyl-trichloro-ethane (DDT) and hexachlorohexane (HCH) pesticide residues in foodstuffs from markets in Ile-Ife, Nigeria. ... International Journal of Biological and Chemical Sciences ... Keywords: Dichlorodiphenyltrichloroethane, hexachlorocyclohexane, pesticide, residue, cowpea grain, yam chip.

  8. On the Structural Context and Identification of Enzyme Catalytic Residues

    Science.gov (United States)

    Chien, Yu-Tung; Huang, Shao-Wei

    2013-01-01

    Enzymes play important roles in most of the biological processes. Although only a small fraction of residues are directly involved in catalytic reactions, these catalytic residues are the most crucial parts in enzymes. The study of the fundamental and unique features of catalytic residues benefits the understanding of enzyme functions and catalytic mechanisms. In this work, we analyze the structural context of catalytic residues based on theoretical and experimental structure flexibility. The results show that catalytic residues have distinct structural features and context. Their neighboring residues, whether sequence or structure neighbors within specific range, are usually structurally more rigid than those of noncatalytic residues. The structural context feature is combined with support vector machine to identify catalytic residues from enzyme structure. The prediction results are better or comparable to those of recent structure-based prediction methods. PMID:23484160

  9. BIOMASS FROM CROP RESIDUES: COST AND SUPPLY ESTIMATES

    OpenAIRE

    Gallagher, Paul W.; Dikeman, Mark; Fritz, John; Wailes, Eric J.; Gauthier, Wayne M.; Shapouri, Hosein

    2003-01-01

    The supply of harvested crop residues as a feed stock for energy products is estimated in this report. The estimates account for economic and environmental factors governing residue supply. The supply results span major agricultural crops in four distinct cropping regions of the United States, taking into account local variation in cost-determining factors such as residue yield, geographic density of residues, and competition for livestock feed use.

  10. Identification of residue pairing in interacting β-strands from a predicted residue contact map.

    Science.gov (United States)

    Mao, Wenzhi; Wang, Tong; Zhang, Wenxuan; Gong, Haipeng

    2018-04-19

    Despite the rapid progress of protein residue contact prediction, predicted residue contact maps frequently contain many errors. However, information of residue pairing in β strands could be extracted from a noisy contact map, due to the presence of characteristic contact patterns in β-β interactions. This information may benefit the tertiary structure prediction of mainly β proteins. In this work, we propose a novel ridge-detection-based β-β contact predictor to identify residue pairing in β strands from any predicted residue contact map. Our algorithm RDb 2 C adopts ridge detection, a well-developed technique in computer image processing, to capture consecutive residue contacts, and then utilizes a novel multi-stage random forest framework to integrate the ridge information and additional features for prediction. Starting from the predicted contact map of CCMpred, RDb 2 C remarkably outperforms all state-of-the-art methods on two conventional test sets of β proteins (BetaSheet916 and BetaSheet1452), and achieves F1-scores of ~ 62% and ~ 76% at the residue level and strand level, respectively. Taking the prediction of the more advanced RaptorX-Contact as input, RDb 2 C achieves impressively higher performance, with F1-scores reaching ~ 76% and ~ 86% at the residue level and strand level, respectively. In a test of structural modeling using the top 1 L predicted contacts as constraints, for 61 mainly β proteins, the average TM-score achieves 0.442 when using the raw RaptorX-Contact prediction, but increases to 0.506 when using the improved prediction by RDb 2 C. Our method can significantly improve the prediction of β-β contacts from any predicted residue contact maps. Prediction results of our algorithm could be directly applied to effectively facilitate the practical structure prediction of mainly β proteins. All source data and codes are available at http://166.111.152.91/Downloads.html or the GitHub address of https://github.com/wzmao/RDb2C .

  11. Residues of {sup 14}C-paclobutrazol in mangoes

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Maria A.; Tornisielo, Valdemar L.; Castanho, Giuliane M., E-mail: macosta@cena.usp.b [Centro de Energia Nuclear na Agricultura (CENA/USP), Piracicaba, SP (Brazil). Lab. de Ecotoxicologia

    2009-07-01

    Paclobutrazol (PBZ) is a growth regulator used in agricultural systems whose purpose is the control of vegetative growth, stimulating the reproductive capacity of plants. This growth regulator remains active in soil for a long time and its half-life varies with the type of soil and climatic conditions, can severely affect the development of crops. This work aimed to study the residues / metabolites of {sup 14}C-PBZ in mango pulp Tommy Atkins. The tests were performed with mangoes grown in pots stainless steel and application of {sup 14}C-PBZ was performed by the soil projection of the crown, and the mangoes tested in two periods, one year and two years after application. To evaluate the levels of residues of {sup 14}C-PBZ was realize the burning of 200 mg of pulp on biological oxidized and detached {sup 14}CO{sub 2} was detected by liquid scintillation spectrophotometer. The results were 1.65 % of residue of PBZ on fruit collected after two years of application and 4.30 % of residue of PBZ collected on fruit after a year of application and also can see that the product remained in the soil for more than one year, is translocated to the plant and reach the edible part, the pulp fruit. The identification of residual {sup 14}C- PBZ/metabolites by thin-layer chromatography did not reveal any pattern of PBZ / metabolites due to the low activity detected in the samples. Therefore, another procedure was performed for extraction and then analyzed by high performance liquid chromatography (HPLC) for detection of metabolites in the PBZ of mango pulp. (author)

  12. Investigation of the possibility of using residual heat reactor energy

    Science.gov (United States)

    Aminov, R. Z.; Yurin, V. E.; Bessonov, V. N.

    2017-11-01

    The largest contribution to the probable frequency of core damage is blackout events. The main component of the heat capacity at each reactor within a few minutes following a blackout is the heat resulting from the braking of beta-particles and the transfer of gamma-ray energy by the fission fragments and their decay products, which is known as the residual heat. The power of the residual heat changes gradually over a long period of time and for a VVER-1000 reactor is about 15–20 MW of thermal power over 72 hours. Current cooldown systems increase the cost of the basic nuclear power plants (NPP) funds without changing the amount of electricity generated. Such systems remain on standby, accelerating the aging of the equipment and accordingly reducing its reliability. The probability of system failure increases with the duration of idle time. Furthermore, the reactor residual heat energy is not used. A proposed system for cooling nuclear power plants involves the use of residual thermal power to supply the station’s own needs in emergency situations accompanied by a complete blackout. The thermal power of residual heat can be converted to electrical energy through an additional low power steam turbine. In normal mode, the additional steam turbine generates electricity, which makes it possible to ensure spare NPP and a return on the investment in the reservation system. In this work, experimental data obtained from a Balakovo NPP was analyzed to determine the admissibility of cooldown of the reactors through the 2nd circuit over a long time period, while maintaining high-level parameters for the steam generated by the steam generators.

  13. Residues of 14C-paclobutrazol in mangoes

    International Nuclear Information System (INIS)

    Costa, Maria A.; Tornisielo, Valdemar L.; Castanho, Giuliane M.

    2009-01-01

    Paclobutrazol (PBZ) is a growth regulator used in agricultural systems whose purpose is the control of vegetative growth, stimulating the reproductive capacity of plants. This growth regulator remains active in soil for a long time and its half-life varies with the type of soil and climatic conditions, can severely affect the development of crops. This work aimed to study the residues / metabolites of 14 C-PBZ in mango pulp Tommy Atkins. The tests were performed with mangoes grown in pots stainless steel and application of 14 C-PBZ was performed by the soil projection of the crown, and the mangoes tested in two periods, one year and two years after application. To evaluate the levels of residues of 14 C-PBZ was realize the burning of 200 mg of pulp on biological oxidized and detached 14 CO 2 was detected by liquid scintillation spectrophotometer. The results were 1.65 % of residue of PBZ on fruit collected after two years of application and 4.30 % of residue of PBZ collected on fruit after a year of application and also can see that the product remained in the soil for more than one year, is translocated to the plant and reach the edible part, the pulp fruit. The identification of residual 14 C- PBZ/metabolites by thin-layer chromatography did not reveal any pattern of PBZ / metabolites due to the low activity detected in the samples. Therefore, another procedure was performed for extraction and then analyzed by high performance liquid chromatography (HPLC) for detection of metabolites in the PBZ of mango pulp. (author)

  14. Physicochemical and functional characteristics of residual pulp of potato

    Directory of Open Access Journals (Sweden)

    Webber Tavares de CARVALHO

    Full Text Available Abstract Starch-rich liquid effluent is generated after peeling, cutting and washing of tubers during the fries processing. After sedimentation of this effluent is recovered a wet residual pulp, and after drying is obtained dry residual pulp or simply named in this study residual pulp of potato (RPP. In order to convert the effluent into a material easy to store for long periods (such as the potato starch, which would make it suitable for various applications. The aim of this study was to evaluate the effect of the drying conditions, specifically variables temperature and air flow on the drying time and water activity, pH, titratable acidity, instrumental colour parameters, water absorption index, water solubility index and oil absorption capacity of dry RPP. Central Composite Design was used, with temperature levels from 50.0 to 70.0 °C and air flow from 0.06 to 0.092 m3 m–2 s–1. Temperature and airflow affected the study characteristics, except for lightness (L*, water solubility index and oil absorption capacity. It was concluded that milder conditions (lower temperatures and intermediate air flow resulted in higher-quality final products (lighter, less acidic, although requiring higher drying time. Therefore, depending on the product application, different drying conditions can be used.

  15. Urban tree and woody yard residues : another wood resource

    Science.gov (United States)

    David B. McKeever; Kenneth E. Skog

    2003-01-01

    Urban tree and woody yard residues are an important component of the municipal solid waste (MSW) stream in the United States. In 2000, approximately 14.5 million tons of urban tree and woody yard residues was generated, nearly 7% of total MSW. Some woody residues are being recovered for recycling, composting, or other uses, but a large proportion is simply discarded....

  16. Carbaryl residues in cottonseed products in the Philippines

    International Nuclear Information System (INIS)

    Pablo, F.E.

    1981-01-01

    Residues of carbaryl in cottonseed products were determined by spectrophotometry. Carbaryl residues in oil and cake were 0.83 and 0.04 mg/kg respectively. Parallel experiments with 14 C-carbaryl gave comparable results. 14 C-carbaryl residues in oil and cake were 0.42 and 0.15 mg/kg respectively. (author)

  17. 40 CFR 180.586 - Clothianidin; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Clothianidin; tolerances for residues... § 180.586 Clothianidin; tolerances for residues. (a) General. Tolerances are established for residues of the insecticide clothianidin, including its metabolites and degradates. Compliance with the tolerance...

  18. Protein nutritional quality of cowpea and navy bean residue fractions ...

    African Journals Online (AJOL)

    However, the use of the insoluble legume residue, following protein extraction for cereal-legume protein complementation has not been widely studied. In fact, legume residue is considered a waste by-product. The protein quality of cowpea residuewheat and navy bean residue-wheat diets was determined using in-vivo and ...

  19. Logging residues under different stand and harvesting conditions, Rocky Mountains

    Science.gov (United States)

    Robert E. Benson; Cameron M. Johnston

    1976-01-01

    Volume and characteristics of logging residues from 34 harvest areas are presented. Clearcuts and partial cuts logged to conventional utilization levels and to close utilization levels are included. Residue volumes ranged from almost 3, 600 ft3 /acre of wood 3-inches-plus down to about 550 ft3 /acre, depending on treatment. More than 60 percent of the residues were...

  20. 40 CFR 180.406 - Dimethipin; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Dimethipin; tolerances for residues. 180.406 Section 180.406 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... § 180.406 Dimethipin; tolerances for residues. (a) General. Tolerances are established for residues of...

  1. The effect of crop residue layers on evapotranspiration, growth and ...

    African Journals Online (AJOL)

    A layer of harvest residues from the previous crop can reduce wasteful evaporation from the soil surface and thereby increase the efficiency of use of limited water resources for agricultural production. The practice of harvesting sugarcane green and leaving crop residues in the field, as opposed to burning the residue, has ...

  2. 40 CFR 266.112 - Regulation of residues.

    Science.gov (United States)

    2010-07-01

    ... MANAGEMENT FACILITIES Hazardous Waste Burned in Boilers and Industrial Furnaces § 266.112 Regulation of residues. A residue derived from the burning or processing of hazardous waste in a boiler or industrial... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Regulation of residues. 266.112...

  3. 40 CFR 180.106 - Diuron; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Diuron; tolerances for residues. 180... Diuron; tolerances for residues. (a) General. Tolerances are established for the combined residues of the herbicide diuron, 3-(3,4-dichlorophenyl)-1,1-dimethylurea and its metabolites convertible to 3,4...

  4. 40 CFR 180.435 - Deltamethrin; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Deltamethrin; tolerances for residues. 180.435 Section 180.435 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.435 Deltamethrin; tolerances for residues. ...

  5. 40 CFR 180.381 - Oxyfluorfen; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Oxyfluorfen; tolerances for residues... § 180.381 Oxyfluorfen; tolerances for residues. (a) General. Tolerances are established for residues of the herbicide oxyfluorfen [2-chloro-1-(3-ethoxy-4-nitrophenoxy)-4-(trifluoromethyl)benzene] in or on...

  6. Antimicrobial residues screening in pigs and goats slaughtered in ...

    African Journals Online (AJOL)

    Ekene Vivienne Ezenduka

    2012-07-17

    Jul 17, 2012 ... Antimicrobial residue in animal food products is an important index of food safety. Drug residues could result from chemotherapeutic or chemoprophylactic use of drugs in food animals. This occurrence of residue in animal food products has received enormous worldwide attention from some local, ...

  7. Cover crop residue management for optimizing weed control

    NARCIS (Netherlands)

    Kruidhof, H.M.; Bastiaans, L.; Kropff, M.J.

    2009-01-01

    Although residue management seems a key factor in residue-mediated weed suppression, very few studies have systematically compared the influence of different residue management strategies on the establishment of crop and weed species. We evaluated the effect of several methods of pre-treatment and

  8. 12 CFR 23.21 - Estimated residual value.

    Science.gov (United States)

    2010-01-01

    ... estimated residual value in connection with leases of personal property to Federal, State, or local... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Estimated residual value. 23.21 Section 23.21...) Leases § 23.21 Estimated residual value. (a) Recovery of investment and costs. A national bank's estimate...

  9. Applications of bauxite residue: A mini-review.

    Science.gov (United States)

    Verma, Ajay S; Suri, Narendra M; Kant, Suman

    2017-10-01

    Bauxite residue is the waste generated during alumina production by Bayer's process. The amount of bauxite residue (40-50 wt%) generated depends on the quality of bauxite ore used for the processing. High alkalinity and high caustic content in bauxite residue causes environmental risk for fertile soil and ground water contamination. The caustic (NaOH) content in bauxite residue leads to human health risks, like dermal problems and irritation to eyes. Moreover, disposal of bauxite residue requires a large area; such problems can only be minimised by utilising bauxite residue effectively. For two decades, bauxite residue has been used as a binder in cement industries and filler/reinforcement for composite materials in the automobile industry. Valuable metals and oxides, like alumina (Al 2 O 3 ), titanium oxide (TiO 2 ) and iron oxide Fe 2 O 3 , were extracted from bauxite residue to reduce waste. Bauxite residue was utilised in construction and structure industries to make geopolymers. It was also used in the making of glass-ceramics and a coating material. Recently bauxite residue has been utilised to extract rare earth elements like scandium (Sc), yttrium (Y), lanthanum (La), cerium (Ce), neodymium (Nd) and dysprosium (Dy). In this review article, the mineralogical characteristics of bauxite residue are summarised and current progresses on utilisation of bauxite residue in different fields of science and engineering are presented in detail.

  10. Ammoniated maize residue for the fattening of lambs | Seed | South ...

    African Journals Online (AJOL)

    The use of ammoniated maize residue as a replacement for maize meal in the diet for fattening lambs, was investigated. Ammoniation of maize residue increased average daily DMI and ADG at the 0 and 20oh concentrate levels. The feed conversions to carcass in lambs fed untreated maize residue with 40,60 or 80% ...

  11. 40 CFR 180.278 - Phenmedipham; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Phenmedipham; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.278 Phenmedipham; tolerances for residues. (a) General. Tolerances are established for the...

  12. 40 CFR 721.5650 - Pentanediol light residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Pentanediol light residues. 721.5650... Substances § 721.5650 Pentanediol light residues. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as pentanediol light residues (PMN P-95-1750...

  13. 40 CFR 180.191 - Folpet; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Folpet; tolerances for residues. 180... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.191 Folpet; tolerances for residues. (a) General. Tolerances are established for the fungicide folpet (N...

  14. 40 CFR 180.245 - Streptomycin; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Streptomycin; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.245 Streptomycin; tolerances for residues. (a) General. (1) Tolerances are established for...

  15. 40 CFR 180.232 - Butylate; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Butylate; tolerances for residues. 180... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.232 Butylate; tolerances for residues. (a) General. Tolerances are established for the herbicide butylate in or...

  16. 40 CFR 180.229 - Fluometuron; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Fluometuron; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.229 Fluometuron; tolerances for residues. (a) General. (1) Tolerances are established for the...

  17. 40 CFR 180.275 - Chlorothalonil; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... residues. 180.275 Section 180.275 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.275 Chlorothalonil; tolerances for residues. (a) General. (1) Tolerances are established for the...

  18. 40 CFR 180.172 - Dodine; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Dodine; tolerances for residues. 180... PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.172 Dodine; tolerances for residues. (a) General. Tolerances are established for the fungicide dodine (n...

  19. 40 CFR 180.242 - Thiabendazole; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Thiabendazole; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.242 Thiabendazole; tolerances for residues. (a) General. (1) Tolerances are established for the...

  20. Ethanol production from crop residues and soil organic carbon

    NARCIS (Netherlands)

    Reijnders, L.

    2008-01-01

    In decision making about the use of residues from annual crops for ethanol production, alternative applications of these residues should be considered. Especially important is the use of such residues for stabilizing and increasing levels of soil organic carbon. Such alternative use leads to a

  1. 40 CFR 180.144 - Cyhexatin; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Cyhexatin; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.144 Cyhexatin; tolerances for residues. (a) General. Tolerances are established for combined...

  2. 40 CFR 180.239 - Phosphamidon; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Phosphamidon; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.239 Phosphamidon; tolerances for residues. (a) General. Tolerances (expressed as phosphamidon) for...

  3. 9 CFR 381.80 - General; biological residues.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false General; biological residues. 381.80... Carcasses and Parts § 381.80 General; biological residues. (a) The carcasses or parts of carcasses of all... sound statistical sample that they are adulterated because of the presence of any biological residues. ...

  4. 40 CFR 180.252 - Tetrachlorvinphos; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... residues. 180.252 Section 180.252 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.252 Tetrachlorvinphos; tolerances for residues. (a) General. Tolerances are established for the...

  5. 40 CFR 180.231 - Dichlobenil; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Dichlobenil; tolerances for residues...) PESTICIDE PROGRAMS TOLERANCES AND EXEMPTIONS FOR PESTICIDE CHEMICAL RESIDUES IN FOOD Specific Tolerances § 180.231 Dichlobenil; tolerances for residues. (a) General. Tolerances are established for the combined...

  6. Characterization of liquefied wood residues from different liquefaction conditions

    Science.gov (United States)

    Hui Pan; Todd f. Shupe; Chung-Yun Hse

    2007-01-01

    The amount of wood residue is used as a measurement of the extent of wood liquefaction. Characterization of the residue from wood liquefaction provides a new approach to understand some fundamental aspects of the liquefaction reaction. Residues were characterized by wet chemical analyses, Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and...

  7. Environmental Impacts of Diverting Crop Residues to Fuel Use

    NARCIS (Netherlands)

    Clancy, Joy S.

    1997-01-01

    Shortage of fuel wood has lead many rural people to switch to using agricultural residues as an alternative energy source. However this has not always been met with universal acclaim due to the role of residues as fertilisers. Although crop residues and animal manure as a nutrient source has been

  8. finite element model for predicting residual stresses in shielded

    African Journals Online (AJOL)

    eobe

    Diffractometer (XRD 6000). From the Finite Element Model Simulation, the transverse residual stress in the x ... Keywords: Residual stress, 3D FEM, Shielded manual metal arc welding, Low Carbon Steel (ASTM A36), X-Ray diffraction, degree of ..... I. ''Residual stress effects on fatigue life of welded structures using LEFM'',.

  9. Mapping allostery through computational glycine scanning and correlation analysis of residue-residue contacts.

    Science.gov (United States)

    Johnson, Quentin R; Lindsay, Richard J; Nellas, Ricky B; Fernandez, Elias J; Shen, Tongye

    2015-02-24

    Understanding allosteric mechanisms is essential for the physical control of molecular switches and downstream cellular responses. However, it is difficult to decode essential allosteric motions in a high-throughput scheme. A general two-pronged approach to performing automatic data reduction of simulation trajectories is presented here. The first step involves coarse-graining and identifying the most dynamic residue-residue contacts. The second step is performing principal component analysis of these contacts and extracting the large-scale collective motions expressed via these residue-residue contacts. We demonstrated the method using a protein complex of nuclear receptors. Using atomistic modeling and simulation, we examined the protein complex and a set of 18 glycine point mutations of residues that constitute the binding pocket of the ligand effector. The important motions that are responsible for the allostery are reported. In contrast to conventional induced-fit and lock-and-key binding mechanisms, a novel "frustrated-fit" binding mechanism of RXR for allosteric control was revealed.

  10. Retention capacity of samarium (III) in zircon for it possible use in retaining walls for confinement of nuclear residues; Capacidad de retencion de samario (III) en circon para su posible uso en barreras de contencion para confinamiento de residuos nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Garcia G, N

    2006-07-01

    Mexico, as country that produces part of its electric power by nuclear means, should put special emphasis in the development of technologies guided to the sure and long term confinement of the high level nuclear residuals. This work studies the capacity that has the natural zircon to retain to the samarium (III) in solution, by what due, firstly, to characterize the zircon for technical instrumental to determine the purity and characteristic of the mineral in study. The instrumental techniques that were used to carry out the physicochemical characterization were the neutron activation analysis (NAA), the infrared spectroscopy (IS), the thermal gravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), semiquantitative analysis, dispersive energy spectroscopy (EDS), X-ray diffraction (XRD) and luminescence technique. The characterization of the surface properties carries out by means of the determination of the surface area using the BET multipoint technique, acidity constants, hydration time, the determination of the point of null charge (pH{sub PCN}) and density of surface sites (D{sub s}). The luminescence techniques were useful to determine the optimal point hydration of the zircon and for the quantification of the samarium, for that here intends the development of both analysis techniques. With the adjustment of the titration curves in the FITEQL 4 package the constants of surface acidity in the solid/liquid interface were determined. To the finish of this study it was corroborated that the zircon is a mineral that presents appropriate characteristics to be proposed as a contention barrier for the deep geologic confinement. With regard to the study of adsorption that one carries out the samarium retention it is superior to 90% under the described conditions. This investigation could also be applicable in the confinement of dangerous industrial residuals. (Author)

  11. Agrochemical residue-biota interactions in soil and aquatic ecosystems

    International Nuclear Information System (INIS)

    1980-01-01

    Two FAO/IAEA coordinated research programmes are concerned with isotopic tracer-aided studies of agrochemical residue-biota interactions in soils and aquatic ecosystems. They currently involve 18 studies in 14 countries: Brazil, Canada, Egypt, F.R. Germany, Hungary, India, Indonesia, Iraq, Israel, Malaysia, Thailand, Turkey, USA and USSR. The aim was to develop, standardize and apply labelled substrate techniques for comparative assays of primary autotrophic and microheterotrophic production and decay, and complementary tracer techniques to determine the fate, persistence and bioconcentration of trace contaminants. Comparable data were studied concerning the current status of water bodies and likely changes due to contaminants. Soil capacity to decompose undesirable contaminants and residues, and to promote desirable transformations were studied. The techniques were also applied as a diagnostic and prognostic tool, with priority given to rice ecosystems

  12. Laboratory studies of the properties of in-situ burn residues: chemical composition of residues

    International Nuclear Information System (INIS)

    Trudel, B.K.; Buist, I.A.; Schatzke, D.; Aurand, D.

    1996-01-01

    The chemical composition of the residue from small-scale burns of thick oil slicks was studied. The objective was to describe the changes in chemical composition in oils burning on water and to determine how these changes were influenced by the condition of the burn. Small-scale test burns involved burning 40-cm diameter pools of oil on water. A range of eight oil types including seven crude oils and an automotive diesel were burned. For each oil, slicks of fresh oil of three different thicknesses were tested. Two of the oils were tested before and after weathering. Results showed that the composition of the residue differed greatly from the parent oil. Asphaltenes, high-boiling-point aromatics and resins remained concentrated in the burn residue. The burning of slicks appeared to remove most of the lower-molecular weight aromatic hydrocarbons which included the more toxic and more bioavailable components of the crude oils. 11 refs., 6 tabs

  13. Residual Stress Induced by Nitriding and Nitrocarburizing

    DEFF Research Database (Denmark)

    Somers, Marcel A.J.

    2005-01-01

    The present chapter is devoted to the various mechanisms involved in the buildup and relief of residual stress in nitrided and nitrocarburized cases. The work presented is an overview of model studies on iron and iron-based alloys. Subdivision is made between the compound (or white) layer......, developing at the surfce and consisting of iron-based (carbo)nitrides, and the diffusion zone underneath, consisting of iron and alloying element nitrides dispersed in af ferritic matrix. Microstructural features are related directly to the origins of stress buildup and stres relief....

  14. Anaerobic digestion of cider apple residues

    Energy Technology Data Exchange (ETDEWEB)

    Contreras Lopez, A. (E.T.S.I.I., U.N.E.D., Madrid (Spain). Dept. Quimica Applicada a la Ingenieria); Lopez Bobo, R. (E.T.S. Ingeneiros Industriales, Asturias (Spain). Dept. de Energia)

    1992-12-01

    Apple residue from the cider industry is used here for anaerobic fermentation. The effect of retention time and volatile solids concentration on the production of biogas and methane was investigated by using continuously mixed anaerobic fermentors with a working volume of 1 1. The maximum proportions of biogas and methane obtained were 430 1 biogas/kg per day (12 days' retention time and 3% of volatile solids) and 281 1 of methane per day (a retention time of 30 days and 2% of volatile solids), respectively. (author)

  15. Contaminant transport at a waste residue deposit

    DEFF Research Database (Denmark)

    Engesgaard, Peter Knudegaard; Traberg, Rikke

    1996-01-01

    Contaminant transport in an aquifer at an incinerator waste residue deposit in Denmark is simulated. A two-dimensional, geochemical transport code is developed for this purpose and tested by comparison to results from another code, The code is applied to a column experiment and to the field site...... wells. Contamination was first controlled by transport, and later by transport and ion exchange. In both the column and field site simulations the code is used to identify the controlling transport processes, physical or geochemical (ion exchange and mineral precipitation), and to estimate the Involved...

  16. Iterative Regularization with Minimum-Residual Methods

    DEFF Research Database (Denmark)

    Jensen, Toke Koldborg; Hansen, Per Christian

    2007-01-01

    subspaces. We provide a combination of theory and numerical examples, and our analysis confirms the experience that MINRES and MR-II can work as general regularization methods. We also demonstrate theoretically and experimentally that the same is not true, in general, for GMRES and RRGMRES their success......We study the regularization properties of iterative minimum-residual methods applied to discrete ill-posed problems. In these methods, the projection onto the underlying Krylov subspace acts as a regularizer, and the emphasis of this work is on the role played by the basis vectors of these Krylov...... as regularization methods is highly problem dependent....

  17. Iterative regularization with minimum-residual methods

    DEFF Research Database (Denmark)

    Jensen, Toke Koldborg; Hansen, Per Christian

    2006-01-01

    subspaces. We provide a combination of theory and numerical examples, and our analysis confirms the experience that MINRES and MR-II can work as general regularization methods. We also demonstrate theoretically and experimentally that the same is not true, in general, for GMRES and RRGMRES - their success......We study the regularization properties of iterative minimum-residual methods applied to discrete ill-posed problems. In these methods, the projection onto the underlying Krylov subspace acts as a regularizer, and the emphasis of this work is on the role played by the basis vectors of these Krylov...... as regularization methods is highly problem dependent....

  18. Residue number systems theory and applications

    CERN Document Server

    Mohan, P V Ananda

    2016-01-01

    This new and expanded monograph improves upon Mohan's earlier book, Residue Number Systems (Springer, 2002) with a state of the art treatment of the subject. Replete with detailed illustrations and helpful examples, this book covers a host of cutting edge topics such as the core function, the quotient function, new Chinese Remainder theorems, and large integer operations. It also features many significant applications to practical communication systems and cryptography such as FIR filters and elliptic curve cryptography. Starting with a comprehensive introduction to the basics and leading up to current research trends that are not yet widely distributed in other publications, this book will be of interest to both researchers and students alike.

  19. Evaluation of agricultural residues for paper manufacture

    Energy Technology Data Exchange (ETDEWEB)

    Alcaide, L.J.; Baldovin, F.L.; Herranz, J.L.F. (Univ. of Cordoba (Spain))

    1993-03-01

    Five agricultural residues-olive tree fellings, wheat straw, sunflower stalks, vine shoots, and cotton stalks-were evaluated for use as raw materials for paper manufacture. The untreated raw materials and their pulps were tested for hot-water solubles, 1%-NaOH solubles, alcohol-benzene extractables, ash, holocellulose, lignin, [alpha]-cellulose, and pentosans. Handsheets were tested for breaking length, stretch, burst index, and tear index. The results showed wheat straw to be the most promising material. Vine shoots showed the least promise.

  20. Epimorphisms in Varieties of Residuated Structures

    Czech Academy of Sciences Publication Activity Database

    Bezhanishvili, G.; Moraschini, Tommaso; Raftery, J.G.

    2017-01-01

    Roč. 492, 15 December (2017), s. 185-211 ISSN 0021-8693 R&D Projects: GA ČR GA17-04630S Institutional support: RVO:67985807 Keywords : Epimorphism * Brouwerian algebra * Heyting algebra * Esakia space * Residuated lattice * Sugihara monoid * Substructural logic * Intuitionistic logic * Relevance logic * R-mingle * Beth definability Subject RIV: BA - General Mathematics OBOR OECD: Computer sciences, information science, bioinformathics (hardware development to be 2.2, social aspect to be 5.8) Impact factor: 0.610, year: 2016

  1. Residual radioactive material guidelines: Methodology and applications

    International Nuclear Information System (INIS)

    Yu, C.; Yuan, Y.C.; Zielen, A.J.; Wallo, A. III.

    1989-01-01

    A methodology to calculate residual radioactive material guidelines was developed for the US Department of Energy (DOE). This methodology is coded in a menu-driven computer program, RESRAD, which can be run on IBM or IBM-compatible microcomputers. Seven pathways of exposure are considered: external radiation, inhalation, and ingestion of plant foods, meat, milk, aquatic foods, and water. The RESRAD code has been applied to several DOE sites to calculate soil cleanup guidelines. This experience has shown that the computer code is easy to use and very user-friendly. 3 refs., 8 figs

  2. Residual supersymmetry of compactified d = 10 supergravity

    International Nuclear Information System (INIS)

    Wit, B. de; Smit, D.J.; Hari Dass, N.D.

    1986-05-01

    The conditions for residual supersymmetry in compactified ten-dimensional supergravity theories are investigated, including the effect of a non-constant 'warp factor'. The analysis is based on on-shell transformation laws which implies that certain linear combinations of classical field equations must be satisfied. The conditions for superysymmetry are, in general, not very restrictive. When, in addition, one assumes the validity of Bianchi identities, two independent contractions of the Einstein equation are implied. These equations exclude d=4 de Sitter space; for compactifications to d=4 Minkowski space they only allow purely metric Ricci-flat field configurations with constant warp factor. (Auth.)

  3. Agricultural Residues and Biomass Energy Crops

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-06-01

    There are many opportunities to leverage agricultural resources on existing lands without interfering with production of food, feed, fiber, or forest products. In the recently developed advanced biomass feedstock commercialization vision, estimates of potentially available biomass supply from agriculture are built upon the U.S. Department of Agriculture’s (USDA’s) Long-Term Forecast, ensuring that existing product demands are met before biomass crops are planted. Dedicated biomass energy crops and agricultural crop residues are abundant, diverse, and widely distributed across the United States. These potential biomass supplies can play an important role in a national biofuels commercialization strategy.

  4. Life cycle assessment of shredder residue management

    DEFF Research Database (Denmark)

    Boldrin, Alessio; Damgaard, Anders; Brogaard, Line Kai-Sørensen

    This report provides a life-cycle assessment (LCA) of the treatment of shredder residue (SR) in Denmark. The LCA was conducted for the Environmental Protection Agency by DTU Environment in the period March-July 2014, as part of a service agreement between the Danish Environmental Protection Agency...... wood waste, wood waste for recycling and district heating pipes. The LCA was conducted using the EASETECH LCA model developed by DTU Environment for the environmental assessment of waste management systems and environmental technologies. The LCA was conducted in accordance with the LCA principles...

  5. Modelling of the Residual Stress State in a new Type of Residual Stress Specimen

    DEFF Research Database (Denmark)

    Jakobsen, Johnny; Andreasen, Jens Henrik

    2014-01-01

    The paper presents a study on a new type residual stress specimen which is proposed as a simple way to conduct experimental validation for model predictions. A specimen comprising of a steel plate with circular hole embedded into a stack of CSM glass fibre and further infused with an epoxy resin...... forms the experimental case which is analysed. A FE model of the specimen is used for analysing the curing history and the residual stress build up. The model is validated against experimental strain data which are recorded by a Fibre Brag Grating sensor and good agreement has been achieved....

  6. PENETAPAN RESIDU DAN PERKIRAAN PENETAPAN BATAS MAKSIMUM RESIDU (BMR ORGANOKLORIN PADA SIMPLISIA

    Directory of Open Access Journals (Sweden)

    Ani Isnawati

    2012-10-01

    Full Text Available Penggunaaan bahan obat tradisional (simplisia untuk skala industri dan peningkatan produksi tanaman obat dalam skala besar menjadi tidak ekonomis tanpa pestisida. Disatu sisi penggunaan pestisida dapat menguntungkan yaitu menyebabkan toksis pada hama namun disisi lain toksisitas dapat terjadi juga pada manusia, sehingga residu pestisida dalam tanaman obat yang dikonsumsi dalam jangka panjang akan merugikan kesehatan. Batas maksimum Residu (BMR pestisida dalam simplisia baik di Indonesia maupun di negara lain belum ditetapkan. Sehingga untuk itu untuk mengetahui adanya residu pestisida jenis organoklorin yang telah dilarang penggunaannya melalui Permentan No.434.1/kpts/TP.270/7/2001 dan untuk mengetahui batas keamanannya, maka perlu dilakukan penetapan residu organoklorin dalam simplisia dan menetapkan batas keamanan berdasarkan perhitungan secara teoritis. Pengujian residu dilakukan terhadap golongan pestisida organoklorin pada 4 jenis simplisia (daun wungu (Graptophyllum pictum (L Grifl, daun sambiloto Andrographis paniculata Ness, herba pegagan (Centella  asiatica (L Urban, daun tempuyung (Sonchus arvensis (L yang berasal dari 3 lokasi penanaman, yaitu : perkebunan Tanaman Obat Manako (Jawa Barat, Balai Penelitian Tanaman Obat Tawangmangu (BPTO di Jawa Tengah dan Perkebunan Tanaman Obat Purwodadi (Jawa Timur. Pemeriksaan residu pestisida organoklorin menggunakan kromatografi gas dan perhitungan batas keamanan dihitung dengan adanya nilai ADI (Acceptable daily intake yang telah ditetapkan bersama antara JAO dan WHO serta perkiraan banyaknya konsumsi simplisia. Hasil Pengujian residu pestisida organoklorin diperoleh bahwa simplisia daun Wungu (Tawangmangu mengandung residu lindan dengan kadar 0,24 mg/kg, pegagan (Purwodadi, mengandung lindan 0,36 mg/kg dan aldrin 0,31 mg/kg serta pegagan (Manako mengandung heptaklor 0,15 mg/kg dan op-DDE 0,11 mg/kg. Adapun penghitungan BMR heptaklor dan lindan secara teoritis dengan asumsi rata

  7. Modelling of the Residual Stress State in a new Type of Residual Stress Specimen

    DEFF Research Database (Denmark)

    Jakobsen, Johnny; Andreasen, Jens Henrik

    2014-01-01

    forms the experimental case which is analysed. A FE model of the specimen is used for analysing the curing history and the residual stress build up. The model is validated against experimental strain data which are recorded by a Fibre Brag Grating sensor and good agreement has been achieved.......The paper presents a study on a new type residual stress specimen which is proposed as a simple way to conduct experimental validation for model predictions. A specimen comprising of a steel plate with circular hole embedded into a stack of CSM glass fibre and further infused with an epoxy resin...

  8. Reactivity of Athabasca residue and of its SARA fractions during residue hydroconversion

    Energy Technology Data Exchange (ETDEWEB)

    Verstraete, J.; Danial-Fortain, P.; Gauthier, T.; Merdrignac, I. [IFP-Lyon, Vermaison (France); Budzinski, H. [Bordeaux Univ. (France). ISM-LPTC, UMR CNRS

    2009-07-01

    Residue conversion processes are becoming increasingly important because of the declining market for residual fuel oil and a greater demand for middle distillates. Ebullated-bed hydroconversion is a commercially proven technology for converting heavy feedstocks with high amounts of impurities. The process enables the conversion of atmospheric or vacuum residues at temperatures up to 440 degrees C, and at liquid hourly space velocity (LHSV) conditions in the range of 0.15 to 0.5 per hour. A 540 degrees C conversion of up to 80 weight per cent can be achieved under these conditions. This paper reported on a research study conducted at IFP Lyon in which the residue hydroconversion in a large-scale ebullated bed bench unit was investigated to determine the impact of operating conditions and feed properties on yield and product qualities. Hydrogen was added to the feed in the bench units to keep a high hydrogen partial pressure and favour the catalytic hydroconversion reactions. In a typical test, the reactor was fed with 50 g of feedstock and 0.45 g of crushed equilibrium industrial NiMo catalyst, pressurized hydrogen and quickly heated at the reaction temperature. This paper also discussed the conversion of Athabasca bitumen residue in the large-scale pilot plant and also in the small scale batch reactor. The effect of operating temperature and space velocity was examined. The reactivity of the saturates, aromatics, resins and asphaltenes (SARA) fractions of the bitumen was studied separately in order to better understand the conversion mechanisms and reactivities. The Athabasca bitumen feed and SARA fractions were also analyzed in terms of standard petroleum analysis, SARA fractionation, elemental analysis, size exclusion chromatography (SEC) and 13C NMR. Hydroconversion experiments were conducted in the batch unit at different reaction temperatures and reaction times. A comparison of small-scale batch results with those obtained with the continuous large-scale bench

  9. Electroremediation of air pollution control residues in a continuous reactor

    DEFF Research Database (Denmark)

    Jensen, Pernille Erland; Ferreira, Célia M. D.; Hansen, Henrik K.

    2010-01-01

    Air pollution control (APC) residue from municipal solid waste incineration is considered hazardous waste due to its alkalinity and high content of salts and mobile heavy metals. Various solutions for the handling of APC-residue exist, however most commercial solutions involve landfilling. A demand...... for environmental sustainable alternatives exists and electrodialysis could be such an alternative. The potential of electrodialysis for treating APC-residue is explored in this work by designing and testing a continuous-flow bench-scale reactor that can work with a high solids content feed solution. Experiments...... were made with raw residue, water-washed residue, acid washed residue and acid-treated residue with emphasis on reduction of heavy metal mobility. Main results indicate that the reactor successfully removes toxic elements lead, copper, cadmium and zinc from the feed stream, suggesting...

  10. Electrodialytic remediation of air pollution control residues in bench scale

    DEFF Research Database (Denmark)

    Jensen, Pernille Erland; Ferreira, Celia; Hansen, Henrik K.

    2008-01-01

    Air pollution control (APC) residue from municipal solid waste incineration (MSWI) is considered a hazardous waste due to its alkalinity and high content of salts and mobile heavy metals. Various solutions for the handling of APC-residue exist in different regions; however, most commercial...... solutions are concerned with deposition. A demand for more environmentally friendly alternatives exists. Electrodialysis could be such an alternative, and the potential is being explored. This work presents a bench scale study of the feasibility of treating APC-residue from a dry system by electrodialysis....... A system resembling conventional electrodialysis was designed and adjusted to fit the high solids content feed solution (10% APC residue, 90% water). Experiments were made in bench scale with raw residue (natural pH > 12), water pre-residue (natural pH > 12), acid pre-washed residue (pH 10), and acid...

  11. Will Incremental Hemodialysis Preserve Residual Function and Improve Patient Survival?

    Science.gov (United States)

    Davenport, Andrew

    2015-01-01

    The progressive loss of residual renal function in peritoneal dialysis patients is associated with increased mortality. It has been suggested that incremental dialysis may help preserve residual renal function and improve patient survival. Residual renal function depends upon both patient related and dialysis associated factors. Maintaining patients in an over-hydrated state may be associated with better preservation of residual renal function but any benefit comes with a significant risk of cardiovascular consequences. Notably, it is only observational studies that have reported an association between dialysis patient survival and residual renal function; causality has not been established for dialysis patient survival. The tenuous connections between residual renal function and outcomes and between incremental hemodialysis and residual renal function should temper our enthusiasm for interventions in this area. PMID:25385441

  12. Eviromental Economic and Technological Residues Management Demands: An Optimization Tool.

    Directory of Open Access Journals (Sweden)

    Marisa Soares Borges

    2012-12-01

    Full Text Available Industrial residues management is a very demanding task since many different goals must be achieved. The combination of different approaches used by people from different stuff is very challenging activity that can misuse the residues potential value and applicability. An interactive WEB base tool, to integrate different sectors and overcome residues management difficulties will be presented. The system must be loaded with all data concerning the residue life cycle, and through data integration and modeling routine will give the best alternative as output. As wider and complete the system data becomes, by information loading from differen t segment, more efficient the residues management becomes. The user friendly tool will encourage the participation of industries, labs and research institutions to obtain qualified information about industrial residues inventory, raw materials recovery, characteristics, treatment and alternative uses, to achieve residues management sustainability.

  13. Pesticide residues in locally available cereals and vegetables

    International Nuclear Information System (INIS)

    Cunanan, S.A.; Santos, F.L.; Bonoan, L.S.

    1976-03-01

    Vegetable samples (pechay, cabbage, lettuce, green beans and tomatoes) bought from public markets in the Metro Manila area were analyzed for pesticide residues using gas chromatography. The samples analyzed in 1968-69 contained high levels of chlorinated pesticides such as DDT, Aldrin, Endrin, and Thiodan, while in the samples analyzed in January 1976, no chlorinated and organophosphate pesticides were detected. Cereal samples (rice, corn and sorghum) were obtained from the National Grains Authority and analyzed for pesticide residues and bromine residues. Total bromine residues was determined by neutron activation analysis. In most of the samples analyzed, the concentrations of pesticide residues were below the tolerance levels set by the FAO/WHO Committee on Pesticide Residues in Foods. An exception was one rice sample from Thailand, the bromine residue content (110ppm) of which exceeds the tolerance level of 50ppm

  14. Improving residue-residue contact prediction via low-rank and sparse decomposition of residue correlation matrix.

    Science.gov (United States)

    Zhang, Haicang; Gao, Yujuan; Deng, Minghua; Wang, Chao; Zhu, Jianwei; Li, Shuai Cheng; Zheng, Wei-Mou; Bu, Dongbo

    2016-03-25

    Strategies for correlation analysis in protein contact prediction often encounter two challenges, namely, the indirect coupling among residues, and the background correlations mainly caused by phylogenetic biases. While various studies have been conducted on how to disentangle indirect coupling, the removal of background correlations still remains unresolved. Here, we present an approach for removing background correlations via low-rank and sparse decomposition (LRS) of a residue correlation matrix. The correlation matrix can be constructed using either local inference strategies (e.g., mutual information, or MI) or global inference strategies (e.g., direct coupling analysis, or DCA). In our approach, a correlation matrix was decomposed into two components, i.e., a low-rank component representing background correlations, and a sparse component representing true correlations. Finally the residue contacts were inferred from the sparse component of correlation matrix. We trained our LRS-based method on the PSICOV dataset, and tested it on both GREMLIN and CASP11 datasets. Our experimental results suggested that LRS significantly improves the contact prediction precision. For example, when equipped with the LRS technique, the prediction precision of MI and mfDCA increased from 0.25 to 0.67 and from 0.58 to 0.70, respectively (Top L/10 predicted contacts, sequence separation: 5 AA, dataset: GREMLIN). In addition, our LRS technique also consistently outperforms the popular denoising technique APC (average product correction), on both local (MI_LRS: 0.67 vs MI_APC: 0.34) and global measures (mfDCA_LRS: 0.70 vs mfDCA_APC: 0.67). Interestingly, we found out that when equipped with our LRS technique, local inference strategies performed in a comparable manner to that of global inference strategies, implying that the application of LRS technique narrowed down the performance gap between local and global inference strategies. Overall, our LRS technique greatly facilitates

  15. Residues and world-sheet instantons

    Energy Technology Data Exchange (ETDEWEB)

    Beasley, Chris [Joseph Henry Laboratories, Princeton University, New Jersey (United States)]. E-mail: cbeasley@princeton.edu; Witten, Edward [School of Natural Sciences, Institute for Advanced Studies, Princeton, New Jersey (United States)]. E-mail: witten@ias.edu

    2003-10-01

    We reconsider the question of which Calabi-Yau compactifications of the heterotic string are stable under world-sheet instanton corrections to the effective space-time superpotential. For instance, compactifications described by (0; 2) linear sigma models are believed to be stable, suggesting a remarkable cancellation among the instanton effects in these theories. Here, we show that this cancellation follows directly from a residue theorem, whose proof relies only upon the right-moving world-sheet supersymmetries and suitable compactness properties of the (0; 2) linear sigma model. Our residue theorem also extends to a new class of 'half-linear' sigma models. Using these half-linear models, we show that heterotic compactifications on the quintic hypersurface in CP{sup 4} for which the gauge bundle pulls back from a bundle on CP{sup 4} are stable. Finally, we apply similar ideas to compute the superpotential contributions from families of membrane instantons in M-theory compactifications on manifolds of G{sub 2} holonomy. (author)

  16. Alcohol production from agricultural and forestry residues

    Energy Technology Data Exchange (ETDEWEB)

    Dale, L; Opilla, R; Surles, T

    1980-09-01

    Technologies available for the production of ethanol from whole corn are reviewed. Particular emphasis is placed on the environmental aspects of the process, including land utilization and possible air and water pollutants. Suggestions are made for technological changes intended to improve the economics of the process as well as to reduce some of the pollution from by-product disposal. Ethanol may be derived from renewable cellulosic substances by either enzymatic or acid hydrolysis of cellulose to sugar, followed by conventional fermentation and distillation. The use of two agricultural residues - corn stover (field stalks remaining after harvest) and straw from wheat crops - is reviewed as a cellulosic feedstock. Two processes have been evaluated with regard to environmental impact - a two-stage acid process developed by G.T. Tsao of Purdue University and an enzymatic process based on the laboratory findings of C.R. Wilke of the University of California, Berkeley. The environmental residuals expected from the manufacture of methyl and ethyl alcohols from woody biomass are covered. The methanol is produced in a gasification process, whereas ethanol is produced by hydrolysis and fermentation processes similar to those used to derive ethanol from cellulosic materials.

  17. Alcohol production from agricultural and forestry residues

    Energy Technology Data Exchange (ETDEWEB)

    Opilla, R.; Dale, L.; Surles, T.

    1980-05-01

    A variety of carbohydrate sources can be used as raw material for the production of ethanol. Section 1 is a review of technologies available for the production of ethanol from whole corn. Particular emphasis is placed on the environmental aspects of the process, including land utilization and possible air and water pollutants. Suggestions are made for technological changes intended to improve the economics of the process as well as to reduce some of the pollution from by-product disposal. Ethanol may be derived from renewable cellulosic substances by either enzymatic or acid hydrolysis of cellulose to sugar, followed by conventional fermentation and distillation. Section 2 is a review of the use of two agricultural residues - corn stover (field stalks remaining after harvest) and straw from wheat crops - as a cellulosic feedstock. Two processes have been evaluated with regard to environmental impact - a two-stage acid process developed by G.T. Tsao of Purdue University and an enzymatic process based on the laboratory findings of C.R. Wilke of the University of California, Berkeley. Section 3 deals with the environmental residuals expected from the manufacture of methyl and ethyl alcohols from woody biomass. The methanol is produced in a gasification process, whereas ethanol is produced by hydrolysis and fermentation processes similar to those used to derive ethanol from cellulosic materials.

  18. Analysis of dissolution residues of irradiated fuels

    International Nuclear Information System (INIS)

    Regnaud, F.; Tcherniatine, N.

    1980-12-01

    In the industrial dissolution conditions obtaining in reprocessing plants, the acid digests the irradiated nuclear fuels and leaves an insoluble product. This phenomenon is particularly conspicuous in the case of the UO 2 , PuO 2 mixed oxides of the fast neutron system irradiated at high specific burn-up. It is observed to a lesser degree in the case of UO 2 oxides of the ordinary water system. The quantity of insoluble product appears to depend on the specific burn-up. These residues are attributed to metallic phases comprising uranium, plutonium, ruthenium, palladium, rhodium and molybdenum. Owing to the existence of these residues, the radioactivity of which is high, the reprocessing plant requires a separation process, particular care in order to avoid their build-up, and packaging and storage facilities. This is why a programme on the physical-chemical study of the compounds has been initiated to develop a chemical digestion method, elemental analysis methods and the study of certain physical parameters such as granulometry [fr

  19. Morphing of geometric composites via residual swelling.

    Science.gov (United States)

    Pezzulla, Matteo; Shillig, Steven A; Nardinocchi, Paola; Holmes, Douglas P

    2015-08-07

    Understanding and controlling the shape of thin, soft objects has been the focus of significant research efforts among physicists, biologists, and engineers in the last decade. These studies aim to utilize advanced materials in novel, adaptive ways such as fabricating smart actuators or mimicking living tissues. Here, we present the controlled growth-like morphing of 2D sheets into 3D shapes by preparing geometric composite structures that deform by residual swelling. The morphing of these geometric composites is dictated by both swelling and geometry, with diffusion controlling the swelling-induced actuation, and geometric confinement dictating the structure's deformed shape. Building on a simple mechanical analog, we present an analytical model that quantitatively describes how the Gaussian and mean curvatures of a thin disk are affected by the interplay among geometry, mechanics, and swelling. This model is in excellent agreement with our experiments and numerics. We show that the dynamics of residual swelling is dictated by a competition between two characteristic diffusive length scales governed by geometry. Our results provide the first 2D analog of Timoshenko's classical formula for the thermal bending of bimetallic beams - our generalization explains how the Gaussian curvature of a 2D geometric composite is affected by geometry and elasticity. The understanding conferred by these results suggests that the controlled shaping of geometric composites may provide a simple complement to traditional manufacturing techniques.

  20. Residual methamphetamine in decontaminated clandestine drug laboratories.

    Science.gov (United States)

    Patrick, Glen; Daniell, William; Treser, Charles

    2009-03-01

    This pilot cross-sectional study examined three previously decontaminated residential clandestine drug laboratories (CDLs) in Washington State to determine the distribution and magnitude of residual methamphetamine concentrations relative to the state decontamination standard. A total of 159 discrete random methamphetamine wipe samples were collected from the three CDLs, focusing on the master bedroom, bathroom, living room, and kitchen at each site. Additional samples were collected from specific non-random locations likely to be contacted by future residents (e.g., door knobs and light switches). Samples were analyzed for methamphetamine by EPA method 8270 for semivolatile organic chemicals. Overall, 59% of random samples and 75% of contact point samples contained methamphetamine in excess of the state decontamination standard (0.1 micro g/100 cm(2)). At each site, methamphetamine concentrations were generally higher and more variable in rooms where methamphetamine was prepared and used. Even compared with the less stringent standard adopted in Colorado (0.5 micro g/100cm(2)), a substantial number of samples at each site still demonstrated excessive residual methamphetamine (random samples, 25%; contact samples, 44%). Independent oversight of CDL decontamination in residential structures is warranted to protect public health. Further research on the efficacy of CDL decontamination procedures and subsequent verification of methods is needed.

  1. Herbicide residues in grapes and wine.

    Science.gov (United States)

    Ying, G G; Williams, B

    1999-05-01

    The persistence of several common herbicides from grapes to wine has been studied. Shiraz, Tarrango and Doradillo grapes were separately sprayed with either norflurazon, oxyfluorfen, oxadiazon or trifluralin-persistent herbicides commonly used for weed control in vineyards. The dissipation of the herbicides from the grapes was followed for 28 days following treatment. Results showed that norflurazon was the most persist herbicide although there were detectable residues of all the herbicides on both red and white grapes at the end of the study period. The penetration of herbicides into the flesh of the grapes was found to be significantly greater for white grapes than for red grapes. Small-lot winemaking experiments showed that norflurazon persisted at levels close to the initial concentration through vinification and into the finished wine. The other herbicides degraded, essentially via first-order kinetics, within the period of "first fermentation" and had largely disappeared after 28 days. The use of charcoal together with filter pads, or with diatomaceous earth was shown to be very effective in removing herbicide residues from the wine. A 5% charcoal filter removed more than 96% of the norflurazon persisting in the treated wine.

  2. Heating oil, distillates and residuals outlook

    International Nuclear Information System (INIS)

    Ervin, M.J.

    2004-01-01

    M.J. Ervin and Associates offers strategic planning support to the downstream petroleum industry in terms of price market monitoring, market analysis, media commentary and benchmarking of marketing operations. This presentation included graphs depicting supply and demand for heating oil distillates and residuals from the mid 1990s to 2004. It was noted that the long-term decline in residuals demand in the United States and Canada are due to environmental issues, the use of natural gas as an alternative, and the increasing complexity of refineries. Graphs depicting market impacts of refinery utilization and inventory trends showed that middle distillate production will increase at the expense of gasoline production. Middle distillates and gasoline markets will be more sensitive to supply disruptions, resulting in more frequent price spikes. Inventory trends indicate a greater reliance on product imports. The demand for heating fuel has stabilized due to the continued penetration of natural gas in eastern states and provinces. The demand for diesel fuel has growth 1.5 to 2 per cent while the demand for jet fuel has remained relatively flat and depends greatly on the growth of the gross national product (GNP). tabs., figs

  3. Residual stress in ceramics and ceramic composites

    International Nuclear Information System (INIS)

    Oden, M.

    1992-01-01

    Residual stresses in Si 3 N 4 and SiC have been measured with X-ray diffraction after grinding and thermal shock. The produced surface stresses are compressive after both treatments. The stresses show a strong dependence on the quenching temperature up to a certain temperature when cracks relax the stresses. The influence of the amount of reinforcing phase on the residual stress state in a Al 2 O 3 /SiC whisker composite was investigated and correlated to a modified Eshelby model. The agreement is excellent. The composite was quenched in liquid He (4K) and the stress state measured after show no relaxation of stresses, indicating elastic behaviour. An in situ strain measurement as a function of temperature conducted on a Al 2 O 3 /SiC whisker composite and a SiC/TiB 2 particle composite show very good agreement with the Eshelby model for the Al 2 O 3 /SiC system but not agreement for the SiC/TiB 2 system. The reason is believed to be stress relaxation during sample preparation. (au) (53 refs., 24 figs., 14 tabs.)

  4. Profile Monitors Based on Residual Gas Interaction

    CERN Document Server

    Forck, P; Giacomini, T; Peters, A

    2005-01-01

    The precise determination of transverse beam profiles at high current hadron accelerators has to be performed non-interceptingly. Two methods will be discussed based on the excitation of the residual gas molecules by the beam particles: Firstly, by beam induced fluorescence (BIF) light is emitted from the residual gas molecules and is observed with an image intensified CCD camera. At most laboratories N2 gas is inserted, which has a large cross section for emission in the blue wave length region. Secondly, a larger signal strength is achieved by detecting the ionization products in an Ionization Profile Monitor (IPM). By applying an electric field all ionization products are accelerated toward a spatial resolving Micro-Channel Plate. The signal read-out can either be performed by observing the light from a phosphor screen behind the MCP or electronically by a wire array. Methods to achieve a high spatial resolution and a fast turn-by-turn readout capability are discussed. Even though various approaches at dif...

  5. A single-residue change in the HIV-1 V3 loop associated with maraviroc resistance impairs CCR5 binding affinity while increasing replicative capacity.

    Science.gov (United States)

    Garcia-Perez, Javier; Staropoli, Isabelle; Azoulay, Stéphane; Heinrich, Jean-Thomas; Cascajero, Almudena; Colin, Philippe; Lortat-Jacob, Hugues; Arenzana-Seisdedos, Fernando; Alcami, Jose; Kellenberger, Esther; Lagane, Bernard

    2015-06-18

    Maraviroc (MVC) is an allosteric CCR5 inhibitor used against HIV-1 infection. While MVC-resistant viruses have been identified in patients, it still remains incompletely known how they adjust their CD4 and CCR5 binding properties to resist MVC inhibition while preserving their replicative capacity. It is thought that they maintain high efficiency of receptor binding. To date however, information about the binding affinities to receptors for inhibitor-resistant HIV-1 remains limited. Here, we show by means of viral envelope (gp120) binding experiments and virus-cell fusion kinetics that a MVC-resistant virus (MVC-Res) that had emerged as a dominant viral quasispecies in a patient displays reduced affinities for CD4 and CCR5 either free or bound to MVC, as compared to its MVC-sensitive counterpart isolated before MVC therapy. An alanine insertion within the GPG motif (G310_P311insA) of the MVC-resistant gp120 V3 loop is responsible for the decreased CCR5 binding affinity, while impaired binding to CD4 is due to sequence changes outside V3. Molecular dynamics simulations of gp120 binding to CCR5 further emphasize that the Ala insertion alters the structure of the V3 tip and weakens interaction with CCR5 ECL2. Paradoxically, infection experiments on cells expressing high levels of CCR5 also showed that Ala allows MVC-Res to use CCR5 efficiently, thereby improving viral fusion and replication efficiencies. Actually, although we found that the V3 loop of MVC-Res is required for high levels of MVC resistance, other regions outside V3 are sufficient to confer a moderate level of resistance. These sequence changes outside V3, however, come with a replication cost, which is compensated for by the Ala insertion in V3. These results indicate that changes in the V3 loop of MVC-resistant viruses can augment the efficiency of CCR5-dependent steps of viral entry other than gp120 binding, thereby compensating for their decreased affinity for entry receptors and improving their

  6. Residual stress characterization of steel TIG welds by neutron diffraction and by residual magnetic stray field mappings

    Science.gov (United States)

    Stegemann, Robert; Cabeza, Sandra; Lyamkin, Viktor; Bruno, Giovanni; Pittner, Andreas; Wimpory, Robert; Boin, Mirko; Kreutzbruck, Marc

    2017-03-01

    The residual stress distribution of tungsten inert gas welded S235JRC+C plates was determined by means of neutron diffraction (ND). Large longitudinal residual stresses with maxima around 600 MPa were found. With these results as reference, the evaluation of residual stress with high spatial resolution GMR (giant magneto resistance) sensors was discussed. The experiments performed indicate a correlation between changes in residual stresses (ND) and the normal component of local residual magnetic stray fields (GMR). Spatial variations in the magnetic field strength perpendicular to the welds are in the order of the magnetic field of the earth.

  7. Biotechnology for agro-industrial residues utilisation: utilisation of agro-residues

    National Research Council Canada - National Science Library

    Nigam, Poonam Singh; Pandey, Ashok

    2009-01-01

    ... wastes whose disposal presents a continuing problem for the farmer. The agro-industrial residues consist of many and varied wastes from agriculture and food industry, which in total account for over 250 million tonnes of waste per year in the UK alone. The prospects and application of biotechnical principles facilitates these prob...

  8. Arginine residues are more effective than lysine residues in eliciting the cellular uptake of onconase.

    Science.gov (United States)

    Sundlass, Nadia K; Raines, Ronald T

    2011-11-29

    Onconase is an amphibian member of the pancreatic ribonuclease family of enzymes that is in clinical trials for the treatment of cancer. Onconase, which has an abundance of lysine residues, is internalized by cancer cells through endocytosis in a mechanism similar to that of cell-penetrating peptides. Here, we compare the effect of lysine versus arginine residues on the biochemical attributes necessary for Onconase to elicit its cytotoxic activity. In the variant R-Onconase, 10 of the 12 lysine residues in Onconase are replaced with arginine, leaving only the two active-site lysines intact. Cytometric assays quantifying internalization showed a 3-fold increase in the internalization of R-Onconase compared with Onconase. R-Onconase also showed greater affinity for heparin and a 2-fold increase in ribonucleolytic activity. Nonetheless, arginine substitution endowed only a slight increase in toxicity toward human cancer cells. Analysis of denaturation induced with guanidine-HCl showed that R-Onconase has less conformational stability than does the wild-type enzyme; moreover, R-Onconase is more susceptible to proteolytic degradation. These data indicate that arginine residues are more effective than lysine in eliciting cellular internalization but can compromise other aspects of protein structure and function.

  9. Crop residue decomposition, residual soil organic matter and nitrogen mineralization in arable soils with contrasting textures

    NARCIS (Netherlands)

    Matus, F.J.

    1994-01-01

    To evaluate the significance of cropping, soil texture and soil structure for the decomposition of 14C- and 15N-labelled crop residues, a study was conducted in a sand and a

  10. Predictive hydrogeochemical modelling of bauxite residue sand in field conditions.

    Science.gov (United States)

    Wissmeier, Laurin; Barry, David A; Phillips, Ian R

    2011-07-15

    The suitability of residue sand (the coarse fraction remaining from Bayer's process of bauxite refining) for constructing the surface cover of closed bauxite residue storage areas was investigated. Specifically, its properties as a medium for plant growth are of interest to ensure residue sand can support a sustainable ecosystem following site closure. The geochemical evolution of the residue sand under field conditions, its plant nutrient status and soil moisture retention were studied by integrated modelling of geochemical and hydrological processes. For the parameterization of mineral reactions, amounts and reaction kinetics of the mineral phases natron, calcite, tricalcium aluminate, sodalite, muscovite and analcime were derived from measured acid neutralization curves. The effective exchange capacity for ion adsorption was measured using three independent exchange methods. The geochemical model, which accounts for mineral reactions, cation exchange and activity corrected solution speciation, was formulated in the geochemical modelling framework PHREEQC, and partially validated in a saturated-flow column experiment. For the integration of variably saturated flow with multi-component solute transport in heterogeneous 2D domains, a coupling of PHREEQC with the multi-purpose finite-element solver COMSOL was established. The integrated hydrogeochemical model was applied to predict water availability and quality in a vertical flow lysimeter and a cover design for a storage facility using measured time series of rainfall and evaporation from southwest Western Australia. In both scenarios the sand was fertigated and gypsum-amended. Results show poor long-term retention of fertilizer ions and buffering of the pH around 10 for more than 5 y of leaching. It was concluded that fertigation, gypsum amendment and rainfall leaching alone were insufficient to render the geochemical conditions of residue sand suitable for optimal plant growth within the given timeframe. The

  11. Tryptophan scanning mutagenesis of aromatic residues within the polymerase domain of HIV-1 reverse transcriptase: critical role of Phe-130 for p51 function and second-site revertant restoring viral replication capacity.

    Science.gov (United States)

    Olivares, Isabel; Gutiérrez-Rivas, Mónica; López-Galíndez, Cecilio; Menéndez-Arias, Luis

    2004-07-01

    The effects on virus viability and reverse transcriptase (RT) function of substituting Trp for Tyr or Phe residues within the polymerase domain of human immunodeficiency virus type 1 (HIV-1) RT have been analyzed with an infectious HIV-1 clone. Viruses containing mutations Y56W, F61W, F87W, F116W, Y127W, Y144W, F171W, Y181W, Y183W, Y188W, F227W, or Y232W in their RT-coding regions were viable and showed replication capacities similar or slightly reduced in comparison with the wild-type HIV-1. However, RTs bearing mutations F77W or Y146W had a dNTP-binding defect, rendering nonviable viruses. HIV-1 carrying RT mutations F124W or F130W replicated very poorly, but compensatory changes (K83R for F124W, and T58S for F130W) were selected upon passaging the virus in cell culture. The amino acid substitution F130W diminishes the stability of the 51-kDa subunit of the RT (p51) and impairs polyprotein processing in virus-infected cells, an effect that can be mitigated when T58S is found in p51.

  12. Gasification characteristics of auto shredder residue

    International Nuclear Information System (INIS)

    Navee, S.; Ramzan, N.

    2011-01-01

    Given the large volume of used tyre waste generated each year it is imperative that suitable re-use and disposal techniques are developed for dealing with this problem; presently these include rethreading, reprocessing for use as safe playground and sports surfaces, use as noise reduction barriers and utilisation as a fuel source. This paper reports on pilot scale studies designed to investigate the suitability of automotive waste for energy recovery via gasification. The study was carried out into auto shredder residue, which is a mixture of three distinct waste streams: tyres, rubber/plastic and general automotive waste. The tests included proximate, ultimate and elemental analysis, TGA, as well as calorific value determinations. In addition, the waste was tested in a desktop gasifier, and analysis was carried out to determine the presence and type of combustible gases. It was concluded that tyre waste and rubber/plastic waste are quite suitable fuels for gasification. (author)

  13. Enhancing biogas production from recalcitrant lignocellulosic residue

    DEFF Research Database (Denmark)

    Tsapekos, Panagiotis

    Lignocellulosic substrates are abundant in agricultural areas around the world and lately, are utilized for biogas production in full-scale anaerobic digesters. However, the anaerobic digestion (AD) of these substrates is associated with specific difficulties due to their recalcitrant nature which...... solution for augmented biomass solubilization without causing inhibition to the mandatory anaerobic methanogenic community. Based on the initial microbial analysis, the bioaugmentation with the typically abundant in AD systems C. thermocellum was examined in biogas reactors fed with wheat straw...... be periodically applied in biogas reactors in order to extract the residual methane from the amassing materials and avoid potential accumulation. Additionally, the facultative anaerobic Melioribacter roseus was inoculated in a replicate CSTR following different bioaugmentation strategies, either strictly...

  14. CAREM-25: Residual heat removal system

    International Nuclear Information System (INIS)

    Arvia, Roberto P.; Coppari, Norberto R.; Gomez de Soler, Susana M.; Ramilo, Lucia B.

    2000-01-01

    The objective of this work was the definition and consolidation of the residual heat removal system for the CAREM 25 reactor. The function of this system is cool down the primary circuit, removing the core decay heat from hot stand-by to cold shutdown and during refueling. In addition, this system heats the primary water from the cold shutdown condition to hot stand-by condition during the reactor start up previous to criticality. The system has been designed according to the requirements of the standards: ANSI/ANS 51.1 'Nuclear safety criteria for the design of stationary PWR plants'; ANSI/ANS 58.11 'Design criteria for safe shutdown following selected design basis events in light water reactors' and ANSI/ANS 58.9 'Single failure criteria for light water reactor safety-related fluid systems'. The suggested design fulfills the required functions and design criteria standards. (author)

  15. Residual heat removal during accidental situations

    International Nuclear Information System (INIS)

    Depond, M.; Sureau, H.; Tellier, N.

    1983-07-01

    Existing emergency procedures, whose purpose is residual heat removal and a safe recovery are based on sequential analysis and initiating event diagnosis. This approach was found in some cases inappropriate and inefficient, specially in case of out-of-design accidents corresponding to multiple equipment failure or simultaneous human failures. To cope with these situations, a new approach was necessary. Parallel studies performed in France at Framatome (the designer) and Electricity de France (the utility) gave a new method, called NSSS physical states approach. Prior to the implementation of this method which necessitates further studies and developments, some improvements in the existing operating procedures derived from the NSSS physical states have already been achieved: that is the case for the safety injection control and the development of an emergency procedure called ''U1''. This paper will briefly physical states approach and present the ''U1'' procedure. The tools which will be used to chack these methods are also mentioned

  16. Assessing the environmental impact of geothermal residues

    International Nuclear Information System (INIS)

    Peralta, G.L.; Kirk, D.W.; Graydon, J.W.; Seyfried, P.L.

    1998-01-01

    Scale, sludge and drilling mud from three geothermal fields (Bulalo, Philippines; Cerro Prieto, Mexico; and Dixie Valley, USA) containing As, Cu, Cr, Zn and Pb at levels above the earth's crustal abundance were studied for their environmental impact. Several techniques and procedures were used to assess the risk posed by the residues: whole rock analysis, X- ray diffraction, radioactivity counting, protocol leach tests, toxicity testing, accelerated weathering test and a preliminary acid mine dramage potential test. There was no evidence of toxicity or genotoxicity present in any of the samples tested. Leaching tests indicated that all of the wastes could be classified as non-hazardous. One sample showed a low-level radio activity but it was still within the occupational dose limit. Three samples tested positive for acidification potential while none of the regulated elements were found in the leachate after three months of weathering test

  17. Lifetime and residual strength of materials

    DEFF Research Database (Denmark)

    Nielsen, Lauge Fuglsang

    1997-01-01

    The DVM-theory (Damaged Viscoelastic Material) previously developed by the author to predict lifetime of wood subjected to static loads is further developed in this paper such that harmonic load variations can also be considered. Lifetime (real time or number of cycles) is predicted as a function...... of load amplitude, load average, fractional time under maximum load, and load frequency.The analysis includes prediction of residual strength (re-cycle strength) during the process of load cycling. It is concluded that number of cycles to failure is a very poor design criterion. It is demonstrated how...... the theory developed can be generalized also to consider non-harmonic load variations.Algorithms are presented for design purposes which may be suggested as qualified alternatives to the Palmgren-Miner's methods normally used in fatigue analysis of materials under arbitrary load variations. Prediction...

  18. Instructive of chemical residues waste administration

    International Nuclear Information System (INIS)

    Alfaro Vargas, Ariel

    2014-01-01

    An instructive is established for the waste management system of chemical residues generated at the Universidad de Costa Rica, ensuring the collection, separation, transportation, reuse, recycling and final disposal. The laboratory waste management system is conditioned to the volume and type of waste generated. The respective procedures are listed in data sheets according to the corresponding model: avoid, reduce, recycle, treat, delete. The materials are identified as: expired products, materials or damaged products, substances that have lost some of the required characteristics, waste from the regular activities of the lab, unused products that now no longer used because they are considered inadequate. The chemicals reagents or hazardous are transformed into small amounts of derivatives safe products, or less hazardous, to allow for removal or to pick up a spill of these without problem [es

  19. Heat intolerance: predisposing factor or residual injury?

    Science.gov (United States)

    Epstein, Y

    1990-02-01

    Great individual variability exists in the ability to sustain heat stress. Some individuals are more susceptible to heat than others. Those individuals, among the young active population (athletes, military recruits, laborers), are at risk to contract exertional heat stroke. Low tolerance to heat results from either functional factors, or from congenital or acquired disturbances. In most cases heat intolerance can be foreseen. Cases of dehydration, overweight, low physical fitness, lack of acclimatization, febrile or infectious diseases, and skin disorders should be regarded a priori as predisposing factors for heat intolerance. Special attention should be paid to subjects with previous heat stroke episodes since it might reflect an underlying cause for heat susceptibility. The heat tolerance of these subjects should be tested 8-12 wk postepisode to detect a possible residual injury in the ability to thermoregulate adequately in the heat.

  20. Residual impairment after lower extremity fracture

    DEFF Research Database (Denmark)

    Faergemann, C; Frandsen, P A; Röck, N D

    1998-01-01

    In a prospective follow-up study of 158 consecutive patients 18 to 64 years old with unilateral lower extremity fracture, our aim was to disclose the impairment and disability 6 months after the injury. The patients were interviewed within 1 week after the trauma, and all patients returned...... the functional status before the injury. Additionally, three major aspects of impairments were measured 6 months after the fractures: range of motion, muscle strength, and pain. Most patients had a significantly higher SIP score 6 months after the fracture(s) than pretraumatically. The mean overall SIP score...... was 2.7 pretraumatically and 8.7 6 months posttraumatically. Major deficits in range of motion was observed, especially in the ankle joint. Additionally, loss of muscle strength was observed in the thigh and calf muscles in one fourth of the patients. Only low levels of residual pain were reported after...

  1. Minimal residual disease in chronic lymphocytic leukaemia.

    Science.gov (United States)

    García Vela, José Antonio; García Marco, José Antonio

    2018-02-23

    Minimal residual disease (MRD) assessment is an important endpoint in the treatment of chronic lymphocytic leukaemia (CLL). It is highly predictive of prolonged progression-free survival (PFS) and overall survival and could be considered a surrogate for PFS in the context of chemoimmunotherapy based treatment. Evaluation of MRD level by flow cytometry or molecular techniques in the era of the new BCR and Bcl-2 targeted inhibitors could identify the most cost-effective and durable treatment sequencing. A therapeutic approach guided by the level of MRD might also determine which patients would benefit from an early stop or consolidation therapy. In this review, we discuss the different MRD methods of analysis, which source of tumour samples must be analysed, the future role of the detection of circulating tumour DNA, and the potential role of MRD negativity in clinical practice in the modern era of CLL therapy. Copyright © 2017 Elsevier España, S.L.U. All rights reserved.

  2. Minimal residual method stronger than polynomial preconditioning

    Energy Technology Data Exchange (ETDEWEB)

    Faber, V.; Joubert, W.; Knill, E. [Los Alamos National Lab., NM (United States)] [and others

    1994-12-31

    Two popular methods for solving symmetric and nonsymmetric systems of equations are the minimal residual method, implemented by algorithms such as GMRES, and polynomial preconditioning methods. In this study results are given on the convergence rates of these methods for various classes of matrices. It is shown that for some matrices, such as normal matrices, the convergence rates for GMRES and for the optimal polynomial preconditioning are the same, and for other matrices such as the upper triangular Toeplitz matrices, it is at least assured that if one method converges then the other must converge. On the other hand, it is shown that matrices exist for which restarted GMRES always converges but any polynomial preconditioning of corresponding degree makes no progress toward the solution for some initial error. The implications of these results for these and other iterative methods are discussed.

  3. Residual load carrying capacity of timber joints

    NARCIS (Netherlands)

    Kuilen, J.W.G. van de

    1999-01-01

    Timber joints that have been preloaded for 2 to 8 years have been short term tested in accordance with EN 26891. The applied load levels varied between 30% and 50% of the average short term strength. The study comprised nailed, toothed-plate and split-ring joints. All joints were made of spruce and

  4. Residual entanglement and sudden death: A direct connection

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, J.G.G. de, E-mail: zgeraldo@ufrb.edu.br [Centro de Formação de Professores, Universidade Federal do Recôncavo da Bahia, 45.300-000, Amargosa, BA (Brazil); Departamento de Física, CP 702, Universidade Federal de Minas Gerais, 30123-970, Belo Horizonte, MG (Brazil); Peixoto de Faria, J.G., E-mail: jgpfaria@des.cefetmg.br [Departamento de Física e Matemática, Centro Federal de Educação Tecnológica de Minas Gerais, 30510-000, Belo Horizonte, MG (Brazil); Nemes, M.C., E-mail: carolina@fisica.ufmg.br [Departamento de Física, CP 702, Universidade Federal de Minas Gerais, 30123-970, Belo Horizonte, MG (Brazil)

    2011-11-21

    We explore the results of [V. Coffman, et al., Phys. Rev. A 61 (2000) 052306] derived for general tripartite states in a dynamical context. We study a class of physically motivated tripartite systems. We show that whenever entanglement sudden death occurs in one of the partitions residual entanglement will appear. For fourpartite systems however, the appearance of residual entanglement is not conditioned by sudden death of entanglement. We can only say that if sudden death of entanglement occurs in some partition there will certainly be residual entanglement. -- Highlights: ► For tripartite systems we show there exists residual entanglement if sudden death occurs. ► For fourpartite systems, the residual entanglement is not conditioned by sudden death. ► If sudden death of entanglement occurs there will certainly be residual entanglement.

  5. Naturally occuring radioactivity in residues of drinking water treatment

    International Nuclear Information System (INIS)

    Vornehm, C.; Mallick, R.

    2009-01-01

    In the course of a research project about 500 residues of drinking water treatment from approx. 400 water supply companies in Bavaria were investigated on naturally occurring radioactivity. For each residue the effective dose for workers was evaluated for each residue. The results show that increased activities, particularly of Radium-226, can be found in the material. The dose due to the exposure to the residues, which mostly result from the backwashing of filters, is below the reference value of 1 mSv/a, which can be used according to paragraph 97 of the German radiation protection standard. During the project the quantity of residues in Bavaria and the ways of their disposal were evaluated. In addition the relation between the amount of natural radioisotopes in the residues and the geological and hydrochemical conditions of the water catchment area was pointed out. (orig.)

  6. On root class residuality of HNN-extensions

    International Nuclear Information System (INIS)

    Tieudjo, D.

    2004-08-01

    A sufficient condition or root-class residuality of HNN-extensions with root-class residual base group is proven; namely if G = -1 1Ht = K, φ> is the HNN-extension with base group A, stable letter t and associated subgroups H and K via the isomorphism φ, then G is root-class residual if group A is root-class residual and there exists a homomorphism σ of group G onto some group of a root-class such that σ is one-to-one on H. For the particular case when H = K and σ is the identical map, it is shown that G is root-class residual if and only if A is root-class residual and subgroup H of A is root-class separable. These results are generalized to multiple HNN-extensions. (author)

  7. The method for measuring residual stress in stainless steel pipes

    International Nuclear Information System (INIS)

    Shimov, Georgy; Rozenbaum, Mikhail; Serebryakov, Alexandr; Serebryakov, Andrey

    2016-01-01

    The main reason of appearance and growth of corrosion damages of the nuclear steam generator heat exchanger tubes is the process of stress-corrosion cracking of metal under the influence of residual tensile stress. Methods used in the production for estimating residual stresses (such as a method of ring samples) allow measuring only the average tangential stress of the pipe wall. The method of ring samples does not allow to assess the level of residual stress in the surface layer of the pipe. This paper describes an experimental method for measuring the residual stresses on the pipe surface by etching a thin surface layer of the metal. The construction and working principle of a trial installation are described. The residual stresses in the wall of the tubes 16 × 1.5 mm (steel AISI 321) for nuclear steam generators is calculated. Keywords: heat exchange pipes, stress corrosion cracking, residual stresses, stress distribution, stress measurement.

  8. Environmental Impacts of Diverting Crop Residues to Fuel Use

    OpenAIRE

    Clancy, Joy S.

    1997-01-01

    Shortage of fuel wood has lead many rural people to switch to using agricultural residues as an alternative energy source. However this has not always been met with universal acclaim due to the role of residues as fertilisers. Although crop residues and animal manure as a nutrient source has been superseded by inorganic fertilizers in most intensive farming systems, they continue to be the main source of crop nutrient replacement in most developing countries. There has developed wide spread a...

  9. Moire interferometry and hole drilling system for residual stress measurement

    Science.gov (United States)

    Ya, Min; Dai, Fulong; Lu, Jian

    2003-04-01

    A combined system of four beams moire interferometer and incremental hole-driling machine was designed and applied for residual stress measurement. Two typical experiments were done using this system: non-uniform in-depth residual stress measurement of an ultrasonic shot-peening Aluminum plate; non-uniform in-plane residual stress measurement of an elastic-plastic Aluminum bent beam. Experiments results show good accordant with other measurement results and theory analysis results.

  10. Unburned carbon in combustion residues from mainly solid biofuels

    Energy Technology Data Exchange (ETDEWEB)

    Bjurstroem H; Lind B; Lagerkvist A

    2012-02-15

    Unburned carbon in 21 combustion residues from solid biofuels is investigated using several methods of analysis (a.o. LOI and TOC), as well as micro-Raman spectroscopy. The results are used to discuss the distribution of unburned carbon in the residues from the different combustion plants and its nature (organic or elemental). The consequences of the elemental nature of carbon for environmental properties of the residue are noted

  11. Gold processing residue from Jacobina Basin: chemical and physical properties

    OpenAIRE

    Lima, Luiz Rogério Pinho de Andrade; Bernardez, Letícia Alonso; Barbosa, Luís Alberto Dantas

    2007-01-01

    p. 848-852 Gold processing residues or tailings are found in several areas in the Itapicuru River region (Bahia, Brazil), and previous studies indicated significant heavy metals content in the river sediments. The present work focused on an artisanal gold processing residue found in a site from this region. Samples were taken from the processing residue heaps and used to perform a physical and chemical characterization study using X-ray diffraction, scanning electron microscopy, neutron...

  12. Dietary exposure to tetracycline residues through milk consumption in Iran

    OpenAIRE

    Aalipour, Fathollah; Mirlohi, Maryam; Jalali, Mohammad; Azadbakht, Leila

    2015-01-01

    Background The abundant use of tetracycline antibiotics in veterinary medicine may result in the presence of their residues in milk at unsafe concentrations that can adversely affect public health. The aim of the current study was to evaluate the risk of tetracycline residue (TET) intake via milk consumption amongst different age groups of human consumers in Iran. Methods To quantify the drug residues, HPLC analysis was performed under isocratic conditions using UV detection at 355?nm. Milk c...

  13. The importance of antibiotic residues presence detection in milk

    OpenAIRE

    Dubravka Samaržija; Neven Antunac

    2002-01-01

    Antibiotic residues are the most present inhibitory substances in milkhaving undesirable effect on human health, technological characteristics and the quality of milk and dairy products. In order to protect consumer's health and to ensure high quality milk production, European Union (EU) regulation 2377/90 sets a maximum permitted levels for antibiotic residues in milk. Although the presence of antibiotic residues in milk can be due to animal diseases treatment, and in the case of milking ani...

  14. Chemoselective synthesis of functional homocysteine residues in polypeptides and peptides.

    Science.gov (United States)

    Gharakhanian, Eric G; Deming, Timothy J

    2016-04-18

    A methodology was developed for efficient, chemoselective transformation of methionine residues into stable, functional homocysteine derivatives. Methionine residues can undergo highly chemoselective alkylation reactions at low pH to yield stable sulfonium ions, which could then be selectively demethylated to give stable alkyl homocysteine residues. This mild, two-step process is chemoselective, efficient, tolerates many functional groups, and provides a means for creation of new functional biopolymers, site-specific peptide tagging, and synthesis of biomimetic and structural analogs of peptides.

  15. Residual N effects from livestock manure inputs to soils

    DEFF Research Database (Denmark)

    Schröder, Jaap; Bechini, Luca; Bittman, Shabtai

    Organic inputs including livestock manures provide nitrogen (N) to crops beyond the year of their application. This so-called residual N effect should be taken into account when making decisions on N rates for individual fields, but also when interpreting N response trials in preparation...... of recommendations. This paper addresses general principles of residual N effects, gives literature-based estimates of them, and reviews to which extent residual N effects are included in ecommendations and regulations in selected countries....

  16. Dissecting and analyzing key residues in protein-DNA complexes.

    Science.gov (United States)

    Kulandaisamy, A; Srivastava, Ambuj; Nagarajan, R; Gromiha, M Michael

    2018-04-01

    Protein-DNA interactions are involved in various fundamental biological processes such as replication, transcription, DNA repair, and gene regulation. To understand the interaction in protein-DNA complexes, the integrative study of binding and stabilizing residues is important. In the present study, we have identified key residues that play a dual role in both binding and stability from a nonredundant dataset of 319 protein-DNA complexes. We observed that key residues are identified in very less number of complexes (29%) and only about 4% of stabilizing/binding residues are identified as key residues. Specifically, stabilizing residues have higher preference to be key residues than binding residues. These key residues include polar, nonpolar, aliphatic, aromatic, and charged amino acids. Moreover, we have analyzed and discussed the key residues in different protein-DNA complexes, which are classified based on protein structural class, function, DNA strand, and their conformations. Especially, Ser, Thr, Tyr, Arg, and Lys residues are commonly found in most of the subclasses of protein-DNA complexes. Further, we analyzed atomic contacts, which show that polar-nonpolar is more enriched than other types of contacts. In addition, the charged contacts are highly preferred in protein-DNA complexes compared with protein-protein and protein-RNA complexes. Finally, we have discussed the sequence and structural features of key residues such as conservation score, surrounding hydrophobicity, solvent accessibility, secondary structure, and long-range order. This study will be helpful to understand the recognition mechanism and structural and functional aspects of protein-DNA complexes. Copyright © 2017 John Wiley & Sons, Ltd.

  17. Residual stresses analysis by X-ray and neutrons diffraction

    International Nuclear Information System (INIS)

    Lodini, A.; Perrin, M.

    1996-04-01

    This conference is composed of 17 papers grouped in 13 chapters which main themes are: advantages of neutrons and synchrotron radiation for material characterization; residual stress evaluation from micro-deformation measurements in polycrystalline materials; X-ray and neutron diffractometry; residual stress evaluation by X-ray diffraction in extreme surfaces; residual stress diffraction evaluation in monocrystalline nickel base alloys, in polyphasic materials, composite materials, thin films, multilayers and joints; application to thermonuclear reactor components

  18. Predicting coiled coils by use of pairwise residue correlations.

    OpenAIRE

    Berger, B; Wilson, D B; Wolf, E; Tonchev, T; Milla, M; Kim, P S

    1995-01-01

    A method is presented that predicts coiled-coil domains in protein sequences by using pairwise residue correlations obtained from a (two-stranded) coiled-coil database of 58,217 amino acid residues. A program called PAIRCOIL implements this method and is significantly better than existing methods at distinguishing coiled coils from alpha-helices that are not coiled coils. The database of pairwise residue correlations suggests structural features that stabilize or destabilize coiled coils.

  19. The new method for the residual gas density measurements

    CERN Document Server

    Anashin, V V; Krasnov, A A; Malyshev, O B; Nas'mov, V P; Pyata, E I; Shaftan, T V

    2001-01-01

    A new method of measurement for residual gas density in the vacuum chambers in presence of synchrotron radiation (SR) is described. The method is based on using a photomultiplier tube for the detection of the SR-stimulated residual gas luminescence, which is proportional to the residual gas density and SR intensity. The design of the experimental setup and results of the measurements of densities of residual gases (H sub 2 , CO sub 2 , CO, N sub 2 , Ar and O sub 2) are submitted.

  20. Comparison of residual stress in martensitic alloys by nondestructive techniques

    International Nuclear Information System (INIS)

    Roy, A.K.; Bandyopadhyay, S.; Suresh, S.B.; Wells, D.

    2006-01-01

    Three martensitic materials, namely Alloys EP-823, HT-9 and 422 were subjected to tensile loading at ambient temperature. The cylindrical specimens tested at different levels of tensile loading were analyzed for characterization of residual stress resulting from plastic deformation corresponding to the applied loads between the yield strength and the ultimate tensile strength. The extent of residual stress developed at these applied stresses was analyzed by nondestructive positron annihilation spectroscopy, activation, and neutron diffraction techniques. The results indicate that the residual stresses characterized by all three techniques exhibited a consistent pattern showing a gradual enhancement in residual stress with increasing applied load

  1. Analytical and Experimental Study of Residual Stresses in CFRP

    Directory of Open Access Journals (Sweden)

    Chia-Chin Chiang

    2013-01-01

    Full Text Available Fiber Bragg Grating sensors (FBGs have been utilized in various engineering and photoelectric fields because of their good environment tolerance. In this research, residual stresses of carbon fiber reinforced polymer composites (CFRP were studied using both experimental and analytical approach. The FBGs were embedded inside middle layers of CFRP to study the formation of residual stress during curing process. Finite element analysis was performed using ABAQUS software to simulate the CFRP curing process. Both experimental and simulation results showed that the residual stress appeared during cooling process and the residual stresses could be released when the CFRP was machined to a different shape.

  2. Peptides containing internal residues of pyroglutamic acid: proton NMR characteristics

    International Nuclear Information System (INIS)

    Khan, S.A.

    1986-01-01

    The proton NMR characteristics of internal pyroglutamic acid (Glp; 5-oxoproline) residues in seven tripeptides of the general structure Boc-Xxx-Glp-Yyy-NH 2 were studied. In general, the chemical shifts of several diagnostic protons moved downfield on going from the Glu-containing peptides (Boc-Xxx-Glu-Yyy-NH 2 ) to the corresponding Glp-containing peptides. The C-2 proton of the Xxx residue was shifted by about 1.1 ppm. The N-2 proton of the Yyy residue was shifted by about 0.5 ppm. The C-2 proton of the Glx residue itself was shifted by about 0.5 ppm. One of the Glx C-3 protons was also shifted by about 0.5 ppm, but the other remained essentially unchanged. Finally, the Glx C-4 protons were shifted by about 0.3 ppm. Internal Glu residues are readily converted chemically into internal Glp residues. This conversion also occurs as a side reaction during HP cleavage of the protecting group from Glu(OBzl) residues. The spontaneous fragmentation of serum proteins C3, C4 and λ 2 -macroglobulin under denaturing conditions is probably due to regioselective hydrolysis of an internal Glp residue formed in each of these proteins upon denaturation. These proton NMR characteristics may be useful in establishing the presence of internal Glp residues in synthetic and natural peptides

  3. 21 CFR 173.250 - Methyl alcohol residues.

    Science.gov (United States)

    2010-04-01

    ... FOR HUMAN CONSUMPTION (CONTINUED) SECONDARY DIRECT FOOD ADDITIVES PERMITTED IN FOOD FOR HUMAN CONSUMPTION Solvents, Lubricants, Release Agents and Related Substances § 173.250 Methyl alcohol residues...

  4. Predicting the residual life of plant equipment - Why worry

    International Nuclear Information System (INIS)

    Jaske, C.E.

    1985-01-01

    Predicting the residual life of plant equipment that has been in service for 20 to 30 years or more is a major concern of many industries. This paper reviews the reasons for increased concern for residual-life assessment and the general procedures used in performing such assessments. Some examples and case histories illustrating procedures for assessing remaining service life are discussed. Areas where developments are needed to improve the technology for remaining-life estimation are pointed out. Then, some of the critical issues involved in residual-life assessment are identified. Finally, the future role of residual-life prediction is addressed

  5. Water dynamics clue to key residues in protein folding

    International Nuclear Information System (INIS)

    Gao, Meng; Zhu, Huaiqiu; Yao, Xin-Qiu; She, Zhen-Su

    2010-01-01

    A computational method independent of experimental protein structure information is proposed to recognize key residues in protein folding, from the study of hydration water dynamics. Based on all-atom molecular dynamics simulation, two key residues are recognized with distinct water dynamical behavior in a folding process of the Trp-cage protein. The identified key residues are shown to play an essential role in both 3D structure and hydrophobic-induced collapse. With observations on hydration water dynamics around key residues, a dynamical pathway of folding can be interpreted.

  6. Noise Residual Learning for Noise Modeling in Distributed Video Coding

    DEFF Research Database (Denmark)

    Luong, Huynh Van; Forchhammer, Søren

    2012-01-01

    Distributed video coding (DVC) is a coding paradigm which exploits the source statistics at the decoder side to reduce the complexity at the encoder. The noise model is one of the inherently difficult challenges in DVC. This paper considers Transform Domain Wyner-Ziv (TDWZ) coding and proposes...... noise residual learning techniques that take residues from previously decoded frames into account to estimate the decoding residue more precisely. Moreover, the techniques calculate a number of candidate noise residual distributions within a frame to adaptively optimize the soft side information during...

  7. RESIDUAL LIMB VOLUME CHANGE: SYSTEMATIC REVIEW OF MEASUREMENT AND MANAGEMENT

    Science.gov (United States)

    Sanders, JE; Fatone, S

    2014-01-01

    Management of residual limb volume affects decisions regarding timing of fit of the first prosthesis, when a new prosthetic socket is needed, design of a prosthetic socket, and prescription of accommodation strategies for daily volume fluctuations. The purpose of this systematic review was to assess what is known about measurement and management of residual limb volume change in persons with lower-limb amputation. Publications that met inclusion criteria were grouped into three categories: (I) descriptions of residual limb volume measurement techniques; (II) studies on people with lower-limb amputation investigating the effect of residual limb volume change on clinical care; and (III) studies of residual limb volume management techniques or descriptions of techniques for accommodating or controlling residual limb volume. The review showed that many techniques for the measurement of residual limb volume have been described but clinical use is limited largely because current techniques lack adequate resolution and in-socket measurement capability. Overall, there is limited evidence regarding the management of residual limb volume, and the evidence available focuses primarily on adults with trans-tibial amputation in the early post-operative phase. While we can draw some insights from the available research about residual limb volume measurement and management, further research is required. PMID:22068373

  8. Phosphorus Recovery Using Zirconium-Loaded Saponified Orange Juice Residue

    Science.gov (United States)

    Harada, Hiroyuki; Kondo, Mitsunori; Biswas, Biplob K.; Ohura, Seichirou; Inoue, Katsutoshi; Ishikawa, Susumu; Kawakita, Hidetaka; Ohto, Keisuke

    Zirconium was immobilized to orange juice residue, to investigate the feasibility of using zirconium-loaded saponified orange juice residue (Zr-SOJR) for phosphorus recovery from secondary effluent and the extraction solution from incinerated sewage sludge ash by using H2SO4 and HCl. These had phosphorus concentrations of 68.2 mg/dm3 and 5.9 mg/dm3, respectively. The phosphorus removal rate secondary effluent increased with an increasing solid/liquid ratio in batch experiments. The adsorption capacity of Zr-SOJR was also compared with those obtained using a synthetic phosphorus solution and using zirconium-loaded ferrite. The prepared absorbent was effective for phosphorus removal and exhibited a reasonably high sorption capacity, twice that of zirconium ferrite. Secondary effluent was treated by packed column, and this reached break-through after 300 bed volumes. The results from phosphorous extraction from the ash indicate that can be treated with acid to efficiently recover phosphorous and thus can be absorbed by Zr-SOJR.

  9. Longitudinal Analysis of Residual Feed Intake in Mink using Random Regression with Heterogeneous Residual Variance

    DEFF Research Database (Denmark)

    Shirali, Mahmoud; Nielsen, Vivi Hunnicke; Møller, Steen Henrik

    Heritability of residual feed intake (RFI) increased from low to high over the growing period in male and female mink. The lowest heritability for RFI (male: 0.04 ± 0.01 standard deviation (SD); female: 0.05 ± 0.01 SD) was in early and the highest heritability (male: 0.33 ± 0.02; female: 0.34 ± 0.......02 SD) was achieved at the late growth stages. The genetic correlation between different growth stages for RFI showed a high association (0.91 to 0.98) between early and late growing periods. However, phenotypic correlations were lower from 0.29 to 0.50. The residual variances were substantially higher...

  10. Bioinformatic prediction and in vivo validation of residue-residue interactions in human proteins

    Science.gov (United States)

    Jordan, Daniel; Davis, Erica; Katsanis, Nicholas; Sunyaev, Shamil

    2014-03-01

    Identifying residue-residue interactions in protein molecules is important for understanding both protein structure and function in the context of evolutionary dynamics and medical genetics. Such interactions can be difficult to predict using existing empirical or physical potentials, especially when residues are far from each other in sequence space. Using a multiple sequence alignment of 46 diverse vertebrate species we explore the space of allowed sequences for orthologous protein families. Amino acid changes that are known to damage protein function allow us to identify specific changes that are likely to have interacting partners. We fit the parameters of the continuous-time Markov process used in the alignment to conclude that these interactions are primarily pairwise, rather than higher order. Candidates for sites under pairwise epistasis are predicted, which can then be tested by experiment. We report the results of an initial round of in vivo experiments in a zebrafish model that verify the presence of multiple pairwise interactions predicted by our model. These experimentally validated interactions are novel, distant in sequence, and are not readily explained by known biochemical or biophysical features.

  11. Proficiency test on the determination of pesticide residues in grapes with multi-residue methods.

    Science.gov (United States)

    Dehouck, Pieter; Grimalt, Susana; Dabrio, Marta; Cordeiro, Fernando; Fiamegos, Yiannis; Robouch, Piotr; Fernández-Alba, Amadeo R; de la Calle, Beatriz

    2015-05-22

    This manuscript presents the results of the International Measurement Evaluation Programme 37 (IMEP-37) study, a proficiency test (PT) which was organised to assess the world-wide performance of food control laboratories on the determination of pesticide residues in grapes. This PT supports the implementation of Regulation (EC) No 396/2005 on maximum residue levels of pesticides in or on food and feed of plant and animal origin. Eighty-one participants reported results, forty from EU Member States and forty-one from outside the EU. The test item was a grape sample spiked with 20 selected pesticides. The results of the participants were rated with z- and zeta (ζ-) scores in accordance with ISO 13528 and ISO 17043. The standard deviation for the proficiency assessment, σˆ, of this PT was set at 25% for the 20 measured pesticides based on previous experience with similar measurands. The results reported to IMEP-37 showed that the participants performed satisfactorily, ranging from 81% (carbendazim) to 97% (azoxystrobin, penconazole, pyrimethanil) of the participating laboratories. However, only 30% of the participants managed to analyze all pesticides satisfactorily. Overall, the performance of the participants in this PT was good but there is room for improvement in the development of multi-residue methods for the simultaneous analysis of a large number of pesticides with an increased accuracy. Copyright © 2015 The Authors. Published by Elsevier B.V. All rights reserved.

  12. 50th anniversary of the Florida pesticide residue workshop and the birth of the north american chemical residue workshop.

    Science.gov (United States)

    Mastovska, Katerina

    2014-04-30

    The papers in this special issue of Journal of Agricultural and Food Chemistry were originally presented at the 50th North American Chemical Residue Workshop (NACRW), formerly known as the Florida Pesticide Residue Workshop (FPRW). The 2013 meeting celebrated the rich history of 50 years of the FPRW and the birth of the NACRW, which in its name reflects the increased scope of the workshop to topics related to the analysis of all chemical residues and contaminants in food, feed, and environmental samples.

  13. Identification of Catalytic Residues Using a Novel Feature that Integrates the Microenvironment and Geometrical Location Properties of Residues

    Science.gov (United States)

    Han, Lei; Zhang, Yong-Jun; Song, Jiangning; Liu, Ming S.; Zhang, Ziding

    2012-01-01

    Enzymes play a fundamental role in almost all biological processes and identification of catalytic residues is a crucial step for deciphering the biological functions and understanding the underlying catalytic mechanisms. In this work, we developed a novel structural feature called MEDscore to identify catalytic residues, which integrated the microenvironment (ME) and geometrical properties of amino acid residues. Firstly, we converted a residue's ME into a series of spatially neighboring residue pairs, whose likelihood of being located in a catalytic ME was deduced from a benchmark enzyme dataset. We then calculated an ME-based score, termed as MEscore, by summing up the likelihood of all residue pairs. Secondly, we defined a parameter called Dscore to measure the relative distance of a residue to the center of the protein, provided that catalytic residues are typically located in the center of the protein structure. Finally, we defined the MEDscore feature based on an effective nonlinear integration of MEscore and Dscore. When evaluated on a well-prepared benchmark dataset using five-fold cross-validation tests, MEDscore achieved a robust performance in identifying catalytic residues with an AUC1.0 of 0.889. At a ≤10% false positive rate control, MEDscore correctly identified approximately 70% of the catalytic residues. Remarkably, MEDscore achieved a competitive performance compared with the residue conservation score (e.g. CONscore), the most informative singular feature predominantly employed to identify catalytic residues. To the best of our knowledge, MEDscore is the first singular structural feature exhibiting such an advantage. More importantly, we found that MEDscore is complementary with CONscore and a significantly improved performance can be achieved by combining CONscore with MEDscore in a linear manner. As an implementation of this work, MEDscore has been made freely accessible at http://protein.cau.edu.cn/mepi/. PMID:22829945

  14. Method of producing pitch (distillation residue)

    Energy Technology Data Exchange (ETDEWEB)

    Stepanenko, M.A.; Belkina, T.V.; Krysin, V.P.

    1979-08-15

    A method is proposed for producing pitch by mixing hard coal pitch with anthracene fraction and thermal treatment of the mixture. The method is distinguished in that in order to increase the quality of the pitch, the anthracene fraction is subjected to thermal treatment at 250-300/sup 0/ for 10-13 hours in the presence of air. This duration of heat treatment allows one to build up in the anthracene fraction up to 20-24% of material which is not soluble and toluene, without the formation of products which are not soluble in quinoline. The fraction prepared in this manner is inserted into the initial pitch in the ratio 1:2 up to 1:9, the mixture is subject to heat treatment at temperature 360-380/sup 0/ and air consumption 7-91/kgX hours until the production of pitch with softening temperature of 85-90/sup 0/. As the initial raw material we used pitch with softening temperature of 60/sup 0/, content of substances which are not soluble in quinoline, 2.0% which are not soluble and toluene 20.6% and coking residue of 49.2%. Example. 80 grams of anthracene fraction is added to 320 grams of pitch. The anthracene fraction is subjected previously to heat treatment at 300/sup 0/ for 13 hours in the presence of air, supplied in the amount of 9 liters per hour. As a result of the heat treatment of the content of materials which are not soluble in toluence in the anthracene fraction is 24.0%, in quinoline it is 0.1%. The ratio of a pitch and thermally treated anthracene fraction in the mixture was 4:l. The produced mixture was subjected to heat treatment at 360/sup 0/ for 1.5 hours with air supply in the amount of 7 liters/ kilograms/hours. Pitch is produced with the following characteristics: softening temperature 88/sup 0/, content of substances which are not soluble in toluene 32.5%, in quinilone, 6.0%, coking residue, 56.7%. The invention can be used in the chemical coking and petrochemical industry.

  15. Determination of Pesticides Residues in Cucumbers Grown in Greenhouse and the Effect of Some Procedures on Their Residues.

    Science.gov (United States)

    Leili, Mostafa; Pirmoghani, Amin; Samadi, Mohammad Taghi; Shokoohi, Reza; Roshanaei, Ghodratollah; Poormohammadi, Ali

    2016-11-01

    The objective of this study was to determine the residual concentrations of ethion and imidacloprid in cucumbers grown in greenhouse. The effect of some simple processing procedures on both ethion and imidacloprid residues were also studied. Ten active greenhouses that produce cucumber were randomly selected. Ethion and imidacloprid as the most widely used pesticides were measured in cucumber samples of studied greenhouses. Moreover, the effect of storing, washing, and peeling as simple processing procedures on both ethion and imidacloprid residues were investigated. One hour after pesticide application; the maximum residue levels (MRLs) of ethion and imidacloprid were higher than that of Codex standard level. One day after pesticide application, the levels of pesticides were decreased about 35 and 31% for ethion and imidacloprid, respectively, which still were higher than the MRL. Washing procedure led to about 51 and 42.5% loss in ethion and imidacloprid residues, respectively. Peeling procedure also led to highest loss of 93.4 and 63.7% in ethion and imidacloprid residues, respectively. The recovery for both target analytes was in the range between 88 and 102%. The residue values in collected samples one hour after pesticides application were higher than standard value. The storing, washing, and peeling procedures lead to the decrease of pesticide residues in greenhouse cucumbers. Among them, the peeling procedure has the greatest impact on residual reduction. Therefore, these procedures can be used as simple and effective processing techniques for reducing and removing pesticides from greenhouse products before their consumption.

  16. Functional significance of the conserved residues for the 23-residue module among MTH1 and MutT family proteins.

    Science.gov (United States)

    Fujii, Y; Shimokawa, H; Sekiguchi, M; Nakabeppu, Y

    1999-12-31

    Human MTH1 and Escherichia coli MutT proteins hydrolyze 7, 8-dihydro-8-oxo-dGTP (8-oxo-dGTP) to monophosphate, thus avoiding the incorporation of 8-oxo-7,8-dihydroguanine into nascent DNA. Although only 30 amino acid residues (23%) are identical between MTH1 and MutT, there is a highly conserved region consisting of 23 residues (MTH1, Gly(36)-Gly(58)) with 14 identical residues. A chimeric protein MTH1-Ec, in which the 23-residue sequence of MTH1 was replaced with that of MutT, retains its capability to hydrolyze 8-oxo-dGTP, thereby indicating that the 23-residue sequences of MTH1 and MutT are functionally and structurally equivalent and constitute functional modules. By saturation mutagenesis of the module in MTH1, 14 of the 23 residues proved to be essential to exert 8-oxo-dGTPase activity. For the other 9 residues (40, 42, 44, 46, 47, 49, 50, 54, and 58), positive mutants were obtained, and Arg(50) can be replaced with hydrophobic residues (Val, Leu, or Ile), with a greater stability and higher specific activity of the enzyme. Indispensabilities of Val(39), Ile(45), and Leu(53) indicate that an amphipathic property of alpha-helix I consisting of 14 residues of the module (Thr(44)-Gly(58)) is essential to maintain the stable catalytic surface for 8-oxo-dGTPase.

  17. Pesticide residues in brain tissues of dairy cattle in Lembang

    Directory of Open Access Journals (Sweden)

    Indraningsih

    2006-03-01

    Full Text Available The use of pesticides to control plant diseases may cause residual formation in crops, its byproduct and environmental. Furthermore, the use of agriculture byproduct as animal feed may cause poisoning or residual formation in animal products. The purpose of this study is to investigate of pesticide residues in brain tissues of dairy cattle in relation to animal feed as a contamination source. Samples consisted of animal feeds (19 samples of fodder and 6 samples of feed, 31 samples of sera and 25 samples of brain tissues of dairy cattle collected from Lembang, West Java. Feeds and fodders were collected from dairy farms located in Lembang. Sera were directly collected from 31 heads of Frisien Holstein (FH cattle from the same location, while brain tissues of FH cattle were collected from a local animal slaughtering house. Pesticide residues were analysed using gas chromatography (GC. Both residues of organochlorines and organophosphates were detected from brain tissues with average residue concentration OP was 22.7 ppb and OC was 5.1 ppb and a total residue was 27.8 ppb. The pesticide residues in brain tissues are new information that should be taken into consideration since the Indonesian consumed this tissues as an oval. Although pesticides residue concentration was low, pathological changes were noted microscopically from the brain tissues including extracellular vacuolisation, focal necrosis, haemorrhages, dilatation of basement membrane without cellular infiltration. Both pesticide residues were also detected in sera, where OP (9.0 ppb was higher than OC (4.9 ppb. These pesticides were also detected in animal feeds consisting fodders and feeds. Residues of OP (12.0 ppb were higher than OC (1.8 ppb in feeds, but residues of OP (16.8 ppb were lower than OC (18.7 ppb in fodders. Although, pesticide residues in sera and brain tissues were below the maximum residue limits (MRL of fat, the presence of pesticides in brain tissues should be taken

  18. Identification and characterization of hydrophobic gate residues in TRP channels.

    Science.gov (United States)

    Zheng, Wang; Hu, Ruikun; Cai, Ruiqi; Hofmann, Laura; Hu, Qiaolin; Fatehi, Mohammad; Long, Wentong; Kong, Tim; Tang, Jingfeng; Light, Peter; Flockerzi, Veit; Cao, Ying; Chen, Xing-Zhen

    2018-02-01

    Transient receptor potential (TRP) channels, subdivided into 6 subfamilies in mammals, have essential roles in sensory physiology. They respond to remarkably diverse stimuli, comprising thermal, chemical, and mechanical modalities, through opening or closing of channel gates. In this study, we systematically substituted the hydrophobic residues within the distal fragment of pore-lining helix S6 with hydrophilic residues and, based on Xenopus oocyte and mammalian cell electrophysiology and a hydrophobic gate theory, identified hydrophobic gates in TRPV6/V5/V4/C4/M8. We found that channel activity drastically increased when TRPV6 Ala616 or Met617 or TRPV5 Ala576 or Met577 , but not any of their adjacent residues, was substituted with hydrophilic residues. Channel activity strongly correlated with the hydrophilicity of the residues at those sites, suggesting that consecutive hydrophobic residues TRPV6 Ala616-Met617 and TRPV5 Ala576-Met577 form a double-residue gate in each channel. By the same strategy, we identified a hydrophobic single-residue gate in TRPV4 Iso715 , TRPC4 Iso617 , and TRPM8 Val976 . In support of the hydrophobic gate theory, hydrophilic substitution at the gate site, which removes the hydrophobic gate seal, substantially increased the activity of TRP channels in low-activity states but had little effect on the function of activated channels. The double-residue gate channels were more sensitive to small changes in the gate's hydrophobicity or size than single-residue gate channels. The unconventional double-reside gating mechanism in TRP channels may have been evolved to respond especially to physiologic stimuli that trigger relatively small gate conformational changes.-Zheng, W., Hu, R., Cai, R., Hofmann, L., Hu, Q., Fatehi, M., Long, W., Kong, T., Tang, J., Light, P., Flockerzi, V., Cao, Y., Chen, X.-Z. Identification and characterization of hydrophobic gate residues in TRP channels.

  19. Bioethanol production from rice straw residues

    Directory of Open Access Journals (Sweden)

    Elsayed B. Belal

    2013-01-01

    Full Text Available A rice straw -cellulose utilizing mold was isolated from rotted rice straw residues. The efficient rice straw degrading microorganism was identified as Trichoderma reesei. The results showed that different carbon sources in liquid culture such as rice straw, carboxymethyl cellulose, filter paper, sugar cane bagasse, cotton stalk and banana stalk induced T. reesei cellulase production whereas glucose or Potato Dextrose repressed the synthesis of cellulase. T. reesei cellulase was produced by the solid state culture on rice straw medium. The optimal pH and temperature for T. reesei cellulase production were 6 and 25 ºC, respectively. Rice straw exhibited different susceptibilities towards cellulase to their conversion to reducing sugars. The present study showed also that, the general trend of rice straw bioconversion with cellulase was more than the general trend by T. reesei. This enzyme effectively led to enzymatic conversion of acid, alkali and ultrasonic pretreated cellulose from rice straw into glucose, followed by fermentation into ethanol. The combined method of acid pretreatment with ultrasound and subsequent enzyme treatment resulted the highest conversion of lignocellulose in rice straw to sugar and consequently, highest ethanol concentration after 7 days fermentation with S. cerevisae yeast. The ethanol yield in this study was about 10 and 11 g.L-1.

  20. Detecting chlorinated hydrocarbon residues: Rachel Carson's villains.

    Science.gov (United States)

    Travis, Anthony S

    2012-07-01

    In 1962, Rachel Carson's Silent Spring drew the public's attention to the deleterious effects of chlorinated hydrocarbons employed as economic poisons in agriculture. However, she did not discuss how their residues could be routinely identified and quantified. In part, this was because the introduction of instruments for use in environmental analysis had only just begun, and she was probably unaware of their existence. The development of the instrumental methods began in industry, particularly at Dow and Shell, in the mid-1950s. Dow scientists, by combining mass spectrometry with gas chromatography, developed the most powerful technique, then and now, for the separation, quantitation and identification of chlorinated hydrocarbons. Shell scientists were no less innovative, particularly with the application of highly sensitive gas chromatography detectors to trace analysis. The first of these detectors, the electron capture detector, was invented by James Lovelock at the National Institute of Medical Research, North London, at the end of the 1950s. Around the same time, Dale Coulson in the USA developed his microcoulometric detector.

  1. Residual effect of lambdacyhalothrin on Triatoma infestans

    Directory of Open Access Journals (Sweden)

    Esteban A. Ferro

    1995-06-01

    Full Text Available Insecticidal residual effect and triatomine infestation rates in houses of a community fumigated with lambdcyhalothrin (Icon are reported. No mortality was observed in 5th-instar Triatoma infestans nymphs in 72-hr exposure test on three different surfaces, one month after fumigation for a dose of 31.5 mg am/m2. However, during post-exposure observation a mortality of 60% was recorded for those insect exposed on sprayed woodboard. The results observed with mud-containing treated walls, were markedly poorer (0% of mortality. Twelve month after spraying 40% of mortality was observed on first-instar T. infestans nymphs in 72-hr exposure test on woodboard, but lower mortality rates were observed in mud-containing materials. When the effect of deltamethrin (109 mg ai/m2 and lambdcyhalothrin (94 mg ai/m2 was compared, the former did not appear to be superior at similar loads. Both have showed a mortality rate of 30% on 5th-instar T. infestans nymphs three months post-fumigation. The dose utilized in the field fumigation was enough to get a significant (p < 0.0001 control of triatomine domestic infestation, since it was sufficient to keep 95% of the houses uninfested throughout 21 months following treatment, when compared with baseline situation. A remarkable knock-down effect on adult and nymphs forms of the insect and a high in situ mortality were observed as a result of its application, even at very low doses.

  2. Does weightlifting increase residual force enhancement?

    Science.gov (United States)

    Siebert, Tobias; Kurch, David; Blickhan, Reinhard; Stutzig, Norman

    2016-07-05

    The force maintained following stretching of an active muscle exceeds the isometric force at the same muscle length. This residual force enhancement (RFE) is different for various muscles. It is currently unknown whether training induces changes in RFE. Weightlifters perform a large number of eccentric contractions during training, and RFE might be functionally relevant. The aim of this study was to examine whether there is increased RFE in weightlifters versus a reference group. Therefore, we measured external reaction forces during a multi-joint leg extension in weightlifters (n=10) and a reference group (n=11) using a motor driven leg press dynamometer (ISOMED 2000). Steady state isometric forces after stretching were compared to the corresponding forces obtained during isometric reference contractions. Statistical analyses yielded a significant RFE for both groups (pweightlifting group versus the reference group. We conclude that long-term weightlifting has only a minor influence on RFE. We speculate that the specific training including a combination of eccentric and concentric exercises induced almost no changes in titin-isoform expression which may be responsible for generation of RFE after active muscle stretching. Copyright © 2016 Elsevier Ltd. All rights reserved.

  3. Pulmonary nodule classification with deep residual networks.

    Science.gov (United States)

    Nibali, Aiden; He, Zhen; Wollersheim, Dennis

    2017-10-01

    PURPOSE  : Lung cancer has the highest death rate among all cancers in the USA. In this work we focus on improving the ability of computer-aided diagnosis (CAD) systems to predict the malignancy of nodules from cropped CT images of lung nodules. We evaluate the effectiveness of very deep convolutional neural networks at the task of expert-level lung nodule malignancy classification. Using the state-of-the-art ResNet architecture as our basis, we explore the effect of curriculum learning, transfer learning, and varying network depth on the accuracy of malignancy classification. Due to a lack of public datasets with standardized problem definitions and train/test splits, studies in this area tend to not compare directly against other existing work. This makes it hard to know the relative improvement in the new solution. In contrast, we directly compare our system against two state-of-the-art deep learning systems for nodule classification on the LIDC/IDRI dataset using the same experimental setup and data set. The results show that our system achieves the highest performance in terms of all metrics measured including sensitivity, specificity, precision, AUROC, and accuracy. The proposed method of combining deep residual learning, curriculum learning, and transfer learning translates to high nodule classification accuracy. This reveals a promising new direction for effective pulmonary nodule CAD systems that mirrors the success of recent deep learning advances in other image-based application domains.

  4. Residual heat removal pump retrofit program

    International Nuclear Information System (INIS)

    Dudiak, J.G.; McKenna, J.M.

    1990-01-01

    Residual Heat Removal (RHR) pumps installed in pressurized water reactor power plants are used to provide the removal of decay heat from the reactor and to provide low head safety injection in the event of loss of coolant in the reactor coolant system. These pumps are subjected to rather severe temperature and pressure transients, therefore, the majority of pumps installed in the RHR service are vertical pumps with a single stage impeller. RHR pumps have traditionally been a significant maintenance item for many utilities. The close-coupled pump design requires disassembly of the casing cover from the lower pump casing while performing these routine maintenance tasks. The casing separation requires the loosening of numerous highly torqued studs. Once the casing is separated, the impeller is dropped from the motor shaft to allow removal of the mechanical seal and casing cover from the motor shaft. Galling of the impeller to the motor shaft is not uncommon. The RHR pump internals are radioactive and the separation of the pump casing to perform routine maintenance exposes the maintenance personnel to high radiation levels. The handling of the impeller also exposes the maintenance personnel to high radiation levels. This paper introduces a design modification developed to convert the close-coupled RHR pumps to a coupled configuration

  5. Phase Chemistry of Tank Sludge Residual Components

    Energy Technology Data Exchange (ETDEWEB)

    J.L. Krumhansl

    2002-04-02

    The US Department of Energy (DOE) has millions of gallons of high level nuclear waste stored in underground tanks at Hanford, Washington and Savannah River, South Carolina. These tanks will eventually be emptied and decommissioned. This will leave a residue of sludge adhering to the interior tank surfaces that may contaminate nearby groundwaters with radionuclides and RCRA metals. Performance assessment (PA) calculations must be carried out prior to closing the tanks. This requires developing radionuclide release models from the sludges so that the PA calculations can be based on credible source terms. These efforts continued to be hindered by uncertainties regarding the actual nature of the tank contents and the distribution of radionuclides among the various phases. In particular, it is of vital importance to know what radionuclides are associated with solid sludge components. Experimentation on actual tank sludges can be difficult, dangerous and prohibitively expensive. The research funded under this grant for the past three years was intended to provide a cost-effective method for developing the needed radionuclide release models using non-radioactive artificial sludges. Insights gained from this work will also have more immediate applications in understanding the processes responsible for heel development in the tanks and in developing effective technologies for removing wastes from the tanks.

  6. Automated gunshot residue particle search and characterization.

    Science.gov (United States)

    Tillman, W L

    1987-01-01

    The main disadvantage to gunshot residue (GSR) particle analysis utilizing scanning electron microscope/energy dispersive X-ray (SEM/EDX) instrumentation has been the excessive operator time required for search and identification. This study uses an automated particle search and characterization program for unattended GSR search and identification. This system allows for automatic matrix search, particle sizing, chemical typing, and spectral aquisition with subsequent storage of data to disk for later operator review and verification. This work describes various aspects of the program, determines appropriate parameters adequate for both unique and characteristic GSR particle identification, and evaluates the reliability of data obtained. Samples are collected via the tape lift method from test-firings of .38, .32, .25, and .22 caliber handguns at time after firing intervals of 0 to 6 h. Unique GSR particles are consistently and correctly identified by this method on tape lift samples taken up to 4 h after firing. False positive results of unique GSR particles are not encountered on control handblank samples. This technique appears to provide the forensic science community with an operator-free method of reliable GSR particle search and an improved analyst-time-per-case ratio.

  7. Residue Management: A Computer Program About Conservation Tillage Decisions.

    Science.gov (United States)

    Thien, Steve J.

    1986-01-01

    Describes a computer program, Residue Management, which is designed to supplement discussions on the Universal Soil Loss Equation and the impact of tillage on soil properties for introductory soil courses. The program advances the user through three stages of residue management. Information on obtaining the program is also included. (ML)

  8. 40 CFR 180.151 - Ethylene oxide; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Ethylene oxide; tolerances for... § 180.151 Ethylene oxide; tolerances for residues. (a) General. (1) Tolerances are established for residues of the antimicrobial agent and insecticide ethylene oxide, when used as a postharvest fumigant in...

  9. Isolation of residuals using trend surface analysis to magnetic data ...

    African Journals Online (AJOL)

    Polynomial surfaces of various degrees are fitted to a magnetic data of Awo area, southwestern Nigeria with the aim of isolating the residuals of the area associated with mineralogy. The fourth degree surface correlates better with the magnetic map of the study area. The residualized data were obtained by subtracting the ...

  10. 40 CFR 180.444 - Sulfur dioxide; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... § 180.444 Sulfur dioxide; tolerances for residues. A tolerance is established as follows for sulfite residues of the fungicide sulfur dioxide (determined as (SO2)) in or on the following raw agricultural... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Sulfur dioxide; tolerances for...

  11. Biological treatment of crop residues for ruminant feeding: A review ...

    African Journals Online (AJOL)

    Crop residues are often referred to as 'lignocellulosics' as they are rich in cellulose which is bound with a biopolymer lignin. Rumen microbiota (bacteria, protozoa and fungi), even with their hydrolytic enzymes, are not very competent enough to break these bonds efficiently. Biological treatment of such crop residues using ...

  12. Comparative effects of plant residues and NPK fertilizer on soil ...

    African Journals Online (AJOL)

    Field experiments were conducted at two locations in 2001 and 2002 on acidic Ultisol of Southeast Nigeria to assess the effects of amending soil with plant residues on soil physical and chemical properties. The soil amendment treatments compared were natural fallow, wood ash at 6 tha-1, peanut residue at 12 tha-1, ...

  13. Comparative effect of plant residues and NPK fertilizer on nutrient ...

    African Journals Online (AJOL)

    Field experiments were conducted at two locations in 2001 and 2002 on acidic Ultisol of southeast Nigeria to access the effect of amending soil with plant residues on maize performance. The soil amendment treatments compared were natural fallow, wood ash at 6 tha-1, peanut residue at 12 tha-1, combination of wood ash ...

  14. Nitrous oxide emission from soils amended with crop residues

    NARCIS (Netherlands)

    Velthof, G.L.; Kuikman, P.J.; Oenema, O.

    2002-01-01

    Crop residues incorporated in soil are a potentially important source of nitrous oxide (N2O), though poorly quantified. Here, we report on the N2O emission from 10 crop residues added to a sandy and a clay soil, both with and without additional nitrate (NO3-). In the sandy soil, total nitrous oxide

  15. Quantitative Analysis of Oxytetracycline Residue in Beef and ...

    African Journals Online (AJOL)

    This study showed that a high proportion of beef and chicken consumed in the cities contained violative levels of oxytetracycline residue arising possibly from indiscriminate antibiotics usage in Nigeria livestock industry. These could predispose meat consumers to the associated health risks of antibiotic residue. Regulatory ...

  16. Residual Wage Differences by Gender: Bounding the Estimates.

    Science.gov (United States)

    Sakellariou, Chris N.; Patrinos, Harry A.

    1996-01-01

    Uses data from the 1986 Canadian labor market activity survey file to derive estimates of residual gender wage gap differences. Investigates these estimates' dependence on experimental design and on assumptions about discrimination-free wage structures. Residual differences persist, even after restricting the sample to a group of highly motivated,…

  17. 40 CFR 180.225 - Phosphine; tolerances for residues.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Phosphine; tolerances for residues. 180.225 Section 180.225 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED... for residues of the fumigant in or on all RACs resulting from preharvest treatment of pest burrows in...

  18. Residues of tetracycline antibiotic in marketed goats and pigs in ...

    African Journals Online (AJOL)

    Antibiotics used in food animals can occur as residues in their products and constitute health risks to the consumers. 360 fresh meat samples comprising of liver, kidney and muscle tissues of goats and pigs collected from open markets in Ogun and Lagos States were analyzed for residues of tetracycline antibiotics.

  19. Residual Stress Analysis Based on Acoustic and Optical Methods

    Directory of Open Access Journals (Sweden)

    Sanichiro Yoshida

    2016-02-01

    Full Text Available Co-application of acoustoelasticity and optical interferometry to residual stress analysis is discussed. The underlying idea is to combine the advantages of both methods. Acoustoelasticity is capable of evaluating a residual stress absolutely but it is a single point measurement. Optical interferometry is able to measure deformation yielding two-dimensional, full-field data, but it is not suitable for absolute evaluation of residual stresses. By theoretically relating the deformation data to residual stresses, and calibrating it with absolute residual stress evaluated at a reference point, it is possible to measure residual stresses quantitatively, nondestructively and two-dimensionally. The feasibility of the idea has been tested with a butt-jointed dissimilar plate specimen. A steel plate 18.5 mm wide, 50 mm long and 3.37 mm thick is braze-jointed to a cemented carbide plate of the same dimension along the 18.5 mm-side. Acoustoelasticity evaluates the elastic modulus at reference points via acoustic velocity measurement. A tensile load is applied to the specimen at a constant pulling rate in a stress range substantially lower than the yield stress. Optical interferometry measures the resulting acceleration field. Based on the theory of harmonic oscillation, the acceleration field is correlated to compressive and tensile residual stresses qualitatively. The acoustic and optical results show reasonable agreement in the compressive and tensile residual stresses, indicating the feasibility of the idea.

  20. Screening of antibiotics residues and development a new kit

    International Nuclear Information System (INIS)

    Elkhaoui, Faycel

    2009-01-01

    The first part of the work was to detect antibiotic residues in animal nutriment: chicken, fish, eggs and milk, by methods of screening: First Test and Delvotest. The second part covered the development of a new kit for the detection of antibiotics residues for honey and competitor kit First Test and saving time and money.

  1. Residues and duality for singularity categories of isolated Gorenstein singularities

    OpenAIRE

    Murfet, Daniel

    2009-01-01

    We study Serre duality in the singularity category of an isolated Gorenstein singularity and find an explicit formula for the duality pairing in terms of generalised fractions and residues. For hypersurfaces we recover the residue formula of the string theorists Kapustin and Li. These results are obtained from an explicit construction of complete injective resolutions of maximal Cohen-Macaulay modules.

  2. Evaluation of minimum residual pressure as design criterion for ...

    African Journals Online (AJOL)

    ... as the design criterion for minimum residual pressure in water distribution systems. However, the theoretical peak demand in many systems has increased beyond the point where minimum residual pressure exceeds 24 m – at least according to hydraulic models. Additions of customers to existing supply systems have led ...

  3. Simulation of Residual Stresses at Holes in Tempered Glass

    DEFF Research Database (Denmark)

    Nielsen, Jens Henrik; Olesen, John Forbes; Poulsen, Peter Noe

    2010-01-01

    This work presents a full 3D numerical study of the residual stresses in tempered (toughened) glass near holes using Narayanaswamy’s model for the tempering process. It is the objective of the paper to elucidate the influence on the minimal residual compressive stresses at holes from variations in...

  4. Probability-scale residuals for continuous, discrete, and censored data.

    Science.gov (United States)

    Shepherd, Bryan E; Li, Chun; Liu, Qi

    2016-12-01

    We describe a new residual for general regression models, defined as pr ( Y * y ), where y is the observed outcome and Y * is a random variable from the fitted distribution. This probability-scale residual can be written as E {sign( y , Y * )} whereas the popular observed-minus-expected residual can be thought of as E ( y - Y * ). Therefore, the probability-scale residual is useful in settings where differences are not meaningful or where the expectation of the fitted distribution cannot be calculated. We present several desirable properties of the probability-scale residual that make it useful for diagnostics and measuring residual correlation, especially across different outcome types. We demonstrate its utility for continuous, ordered discrete, and censored outcomes, including current status data, and with various models including Cox regression, quantile regression, and ordinal cumulative probability models, for which fully specified distributions are not desirable or needed, and in some cases suitable residuals are not available. The residual is illustrated with simulated data and real datasets from HIV-infected patients on therapy in the southeastern United States and Latin America.

  5. Assessment of Pesticide Residues in Tomatoes and Watermelons ...

    African Journals Online (AJOL)

    ADOWIE PERE

    ABSTRACT: This study investigated the levels of pesticide residues in selected fruits from major markets in Dar es Salaam city. Samples of tomatoes and watermelons were analysed for eighteen organochlorine, organophosphorus and pyrethroid pesticide residues. Extraction was performed using acetone followed by ...

  6. Assessment of pesticide residues in tomatoes and watermelons ...

    African Journals Online (AJOL)

    This study investigated the levels of pesticide residues in selected fruits from major markets in Dar es Salaam city. Samples of tomatoes and watermelons were analysed for eighteen organochlorine, organophosphorus and pyrethroid pesticide residues. Extraction was performed using acetone followed by dichloromethane: ...

  7. A review of organochlorine pesticide residues in ferruginous hawk eggs

    Science.gov (United States)

    Henny, C.J.

    1985-01-01

    Ten Ferruginous Hawk nests in northeast Oregon were studied from 1978 to 1980. Pesticide residues, eggshell thickness, and reproductive success from these nests will be reviewed. In addition, egg residues from other published studies in the Pacific Northwest and elsewhere will be discussed.

  8. Frontline and future of residual stress measurement by neutron diffraction

    International Nuclear Information System (INIS)

    Hayashi, Makoto

    2007-01-01

    Neutron diffraction method is very much effective for measurements of residual stress and texture. In this paper the present techniques for measurements of residual stress and texture are reviewed and plans of improvement of RESA in JRR-3 and Ibaraki Prefecture's Material Design Diffractometer to be installed in J-PARC are introduced. (author)

  9. Polyamines in spermatocytes and residual bodies of rat testis

    DEFF Research Database (Denmark)

    Shin, Masashi; Larsson, Lars-Inge; Fujiwara, Kunio

    2007-01-01

    strongly suggest that the small bodies correspond to the residual bodies, and agree with previous results showing localization of PAs to ribosomes in neurons and gastrointestinal epithelial cells. The accumulation of PAs in residual bodies may reflect a termination of their role in spermiogenesis...

  10. Separation of Regional-Residual Anomaly Using Least Square ...

    African Journals Online (AJOL)

    Separation of Regional-Residual Anomaly Using Least Square Polynomial Fitting Method. ... The data were obtained by digitizing the maps of the above areas, picking the Total magnetic values along the profile line, processed and analyzed. The result of the residual separation revealed that the area is underlain by a ...

  11. Crop residues for advanced biofuels workshop: A synposis

    Science.gov (United States)

    Crop residues are being harvested for a variety of purposes including their use as livestock feed and to produce advanced biofuels. Crop residue harvesting, by definition, reduces the potential annual carbon input to the soil from aboveground biomass but does not affect input from plant roots. The m...

  12. A first look at logging residue characteristics in West Virginia

    Science.gov (United States)

    A. Jeff Martin

    1975-01-01

    In 1973 and 1974, the Forest Products Marketing Laboratory obtained some preliminary information about characteristics of logging residues in West Virginia. Sixteen 1-acre plots were measured in conjunction with a test of the line-intersect sampling method. Findings from the 16 plots showed that hardwood residue volumes ranged from 100 to 1,300 cubic feet per acre,...

  13. A logging residue "yield" table for Appalachian hardwoods

    Science.gov (United States)

    A. Jeff Martin

    1976-01-01

    An equation for predicting logging-residue volume per acre for Appalachian hardwoods was developed from data collected on 20 timber sales in national forests in West Virginia and Virginia. The independent variables of type-of-cut, products removed, basal area per acre, and stand age explained 95 percent of the variation in residue volume per acre. A "yield"...

  14. Pesticide residues in four rivers running through an intensive ...

    African Journals Online (AJOL)

    Pesticide residues in four rivers running through an intensive agricultural area, Kilimanjaro, Tanzania. ... pesticide contamination as the rivers are important sources of domestic water in the area. Water samples were extracted ... JASEM. Keywords: Pesticide residues, Surface water, Sediment, Environmental contamination ...

  15. Residues Of Streptomycin Antibiotic In Commercial Layers In ...

    African Journals Online (AJOL)

    Some of the muscle samples recorded residue concentration levels higher than the W.H.O recommended maximum residue level for streptomycin antibiotic in muscle tissue of food animals. In view of the importance of antibiotics in the treatment of bacterial diseases in both human and animals, it is advocated that the use of ...

  16. Ammoniated maJze residue for the fattening of lambs

    African Journals Online (AJOL)

    of feed cost per kg carcass gain, a balanced diet containing untreated maize residue and 67,6t/a concentrate could be replaced by a balanced diet containing ammoniated maize residue and no energy concentrate. The increased dressing percentage and reduced ruminal digesta mass, pH and water volume owing to ...

  17. An intention-activation account of residual switch costs

    NARCIS (Netherlands)

    De Jong, R; Monsell, S; Driver, J

    2000-01-01

    Residual switch costs are performance costs associated with a shift of task that persist even when there is ample time to prepare in advance for the new task. I present a mixture-model approach for evaluating the contributions of two possible causes of residual switch costs: (1) failures to take

  18. Food Access, Food Subsidy, and Residue-Based Bioenergy ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The research also aims to examine the effect of biofuels on the poor's incomes and food consumption. It will focus on the use of agricultural residues to produce energy and its trickle-down effect on agricultural productivity and food security at the local level. Diverting residues to commercial energy production could improve ...

  19. A residual cystic lesion in acute disseminated encephalomyelitis

    Energy Technology Data Exchange (ETDEWEB)

    Go, T. [Otsu Red Cross Hospital, Nagara (Japan). Dept. of Paediatrics; Imai, T. [Kyoto Univ. School of Medicine, Kyoto (Japan). Dept. of Paediatrics

    2000-09-01

    We report a case of acute disseminated encephalomyelitis (ADEM) with a residual cystic lesion on MRI. This seemed to be induced by Japanese encephalitis vaccination. Despite complete clinical improvement with high-dose steroid therapy, the cystic lesion has persisted for 3 years on MRI. There have been no previous reports of residual cystic lesions in ADEM. (orig.)

  20. Residue analysis of organochlorine pesticides in water and ...

    African Journals Online (AJOL)

    Mr Willims

    2013-05-12

    May 12, 2013 ... residues were performed by injecting 1 µL of purified extract into the injection port of a gas chromatograph with a 63Ni electron capture .... Identification and determination of OCP residues by gas chromatography. A gas chromatograph with ..... Distribution of chlorine- ted pesticides in shellfishes from Lagos ...

  1. Enhanced residual mean circulation during the evolution of split type ...

    Indian Academy of Sciences (India)

    8

    keywords: split events, stratospheric sudden warming, residual mean circulation. 1 Introduction ... sudden warming. It is characterized by a rapid cooling of the polar cap tempera- ture (Kuroda, 2008). The competition between planetary waves and gravity waves to the residual .... any automated scheme. The split events ...

  2. Finite element concept to derive isostatic residual maps ...

    Indian Academy of Sciences (India)

    A new space-domain operator based on the shape function concept of finite element analysis has been developed to derive the residual maps of the Gorda Plate of western United States. The technique does not require explicit assumptions on isostatic models. Besides delineating the Gorda Plate boundary, the residual ...

  3. Interpreting residues of petroleum hydrocarbons in wildlife tissues

    International Nuclear Information System (INIS)

    Hall, R.J.; Coon, N.C.

    1988-08-01

    This report is the first publication in the field of environmental-contaminant effects on wildlife to tell the reader how to interpret the results of analytical chemical results. Specifically, the publication describes how to interpret residues of petroleum hydrocarbons in wildlife tissues. Pollutant oil residues in avian species are emphasized

  4. Corn Residue Use by Livestock in the United States

    Directory of Open Access Journals (Sweden)

    Marty R. Schmer

    2017-01-01

    Full Text Available Corn ( L. residue grazing or harvest provides a simple and economical practice to integrate crops and livestock, but limited information is available on how widespread corn residue utilization is practiced by US producers. In 2010, the USDA Economic Research Service surveyed producers from 19 states on corn grain and residue management practices. Total corn residue grazed or harvested was 4.87 million ha. Approximately 4.06 million ha was grazed by 11.7 million livestock (primarily cattle in 2010. The majority of grazed corn residue occurred in Nebraska (1.91 million ha, Iowa (385,000 ha, South Dakota (361,000 ha, and Kansas (344,000 ha. Average grazing days ranged from 10 to 73 d (mean = 40 d. Corn residue harvests predominantly occurred in the central and northern Corn Belt, with an estimated 2.9 Tg of corn residue harvested across the 19 states. This survey highlights the importance of corn residue for US livestock, particularly in the western Corn Belt.

  5. On the Structure of Finite Integral Commutative Residuated Chains

    Czech Academy of Sciences Publication Activity Database

    Horčík, Rostislav

    2011-01-01

    Roč. 21, č. 5 (2011), s. 717-728 ISSN 0955-792X Institutional research plan: CEZ:AV0Z10300504 Keywords : residuated lattice * ordered residuated monoid * nucleus * conucleus,Abelian lattice-ordered group * free commutative monoid Subject RIV: BA - General Mathematics Impact factor: 0.611, year: 2011

  6. Residue analysis of organochlorine pesticides in water and ...

    African Journals Online (AJOL)

    Residue analysis of organochlorine pesticides in water and sediments from Agboyi Creek, Lagos. AB Williams. Abstract. Microlayer water, mixed layer water, epipellic and benthic sediments were collected from Agboyi Creek, Lagos to analyse organochlorine pesticide residues. Sampling was conducted between December ...

  7. Risk and maximum residue limits: a study of hops production

    Science.gov (United States)

    This paper examines how maximum residue limits (MRLs) affect the optimal choice by growers of chemical applications to control pests and diseases. In practice, growers who export balance both yield risk and pesticide residue uncertainty when making chemical application decisions. To address these is...

  8. 33 CFR 157.17 - Oil residue (sludge) tank.

    Science.gov (United States)

    2010-07-01

    ...) POLLUTION RULES FOR THE PROTECTION OF THE MARINE ENVIRONMENT RELATING TO TANK VESSELS CARRYING OIL IN BULK Design, Equipment, and Installation § 157.17 Oil residue (sludge) tank. (a) A tank vessel of 400 gross... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Oil residue (sludge) tank. 157.17...

  9. Finite element concept to derive isostatic residual maps-Application ...

    Indian Academy of Sciences (India)

    A new space-domain operator based on the shape function concept of finite element analysis has been developed to derive the residual maps of the Gorda Plate of western United States. The technique does not require explicit assumptions on isostatic models. Besides delineating the Gorda Plate boundary, the residual ...

  10. Antimicrobial residues screening in pigs and goats slaughtered in ...

    African Journals Online (AJOL)

    Samples of tissues/organs from pigs and goats slaughtered at the Nsukka Municipal abattoir, Southeast, Nigeria were screened for the presence of antimicrobial residues. Samples collected from the muscles, liver and kidney of 40 slaughtered pigs and 40 slaughtered goats were analysed for antimicrobial residues using ...

  11. Effect of crop residue management and cropping system on pearl ...

    African Journals Online (AJOL)

    Retaining crop residues in the field and using legume-based crop rotations have been suggested as ways to simultaneously increase yields per unit area and replenish soil nutrients. The objective of this study was to investigate the influence of two cropping systems and three crop residue management practices on grain ...

  12. Adsorption Property and Mechanism of Oxytetracycline onto Willow Residues.

    Science.gov (United States)

    Wang, Di; Xu, Haiyang; Yang, Shengke; Wang, Wenke; Wang, Yanhua

    2017-12-22

    To elucidate the adsorption property and the mechanism of plant residues to reduce oxytetracycline (OTC), the adsorption of OTC onto raw willow roots (WR-R), stems (WS-R), leaves (WL-R), and adsorption onto desugared willow roots (WR-D), stems (WS-D), and leaves (WL-D) were investigated. The structural characterization was analyzed by scanning electron microscopy, Fourier-transform infrared spectra, and an elemental analyzer. OTC adsorption onto the different tissues of willow residues was compared and correlated with their structures. The adsorption kinetics of OTC onto willow residues was found to follow the pseudo-first-order model. The isothermal adsorption process of OTC onto the different tissues of willow residues followed the Langmuir and Freundlich model and the process was also a spontaneous endothermic reaction, which was mainly physical adsorption. After the willow residues were desugared, the polarity decreased and the aromaticity increased, which explained why the adsorption amounts of the desugared willow residues were higher than those of the unmodified residues. These observations suggest that the raw and modified willow residues have great potential as adsorbents to remove organic pollutants.

  13. Research Progress on Furfural Residues Recycling : A Literature Review

    NARCIS (Netherlands)

    Dai, Chun'ai; Liu, Bo; Girisuta, B.; Heeres, H.J.

    2010-01-01

    Millions of tons of furfural residues from the furfural industry are produced every year in China. Proper recycling of these residues is highly desirable as it may reduce associated environmental problems and increase the economic viability of the furfural industry. Research progress on furfural

  14. Development of an NPP residual lifetime evaluation system

    International Nuclear Information System (INIS)

    Regano, M.; Ibanez, M.; Hevia, F.

    1993-01-01

    Various reasons have given rise to the need for residual life management of Spain's nuclear power plants which lead to the a project for the development of a residual lifetime evaluation system managed by UNESA and supported by the owner groups. This project is described. 1 fig

  15. Compositional analysis of seasonal variation in Danish residual household waste

    DEFF Research Database (Denmark)

    Edjabou, Maklawe Essonanawe; Boldrin, Alessio; Astrup, Thomas Fruergaard

    2018-01-01

    . To assess differences between seasons and within individual households, we collected residual household waste from the same 101 households in summer, autumn and winter. The waste bags were sorted individually, and residual household waste data (mass and composition) were generated for each household...

  16. Assessment of Pesticide Residue Levels in Vegetables sold in some ...

    African Journals Online (AJOL)

    This study investigated pesticide residue levels in the two vegetables commonly eaten in Lagos state Nigeria. The vegetables (Telfairia occidentalis and Celosia argentea) were purchased from six markets (Oyingbo, Mile 12, Mushin, Ajah, Agege and Festac) in Lagos. The pesticide residue levels were determined using gas ...

  17. Assessment of organochlorine pesticides residues in fish sold in ...

    African Journals Online (AJOL)

    This study aimed to investigate the organochlorine pesticide residues in fish sold in markets and fishing sites in Abidjan, Côte d'Ivoire. Pesticides are not only used in agriculture but also in public health for the prevention of malaria. However, pesticide residues may be found in foodstuffs. Contamination of foods by ...

  18. Characterization of Ash Standards for the Residues Project

    CERN Document Server

    Westsik, G A

    2001-01-01

    Measurements have been completed to characterize the plutonium content and isotopic composition of ash standards that are or may be used as quality control check sources for the Residues Stabilization Project. These standards are for use as check sources for the Segmented Gamma Scan Assay System (SGSAS) employed for the Residues Stabilization Project.

  19. Experiences on Pretreatment and Pelletizing of Forestry Residues in Spain

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz, L. [Univ. of Vigo (Spain). Dept. of Natural Resources and Environment

    2006-07-15

    The aim of this work is to assess the technical possibilities in order to use typical wastes from the Spanish forests so that to produce high quality Pellets as well as to study the technical problems in some specific by-products. One of the main barriers the Spanish market faces in order to consolidate the pelletizing technologies is the fact that there are very few industrial experiences of massive production using forestry residues biomass. Instead, industrial wastes such as sawdust and shavings have been more commonly used, to-day. To that purpose, a series of experiences on pretreatment and pelletizing of forestry residues are shown in this work, using to that end typical biomass forestry residues from the Mediterranean countries and making forced-drying studies, granulometric reduction and densifying experiences for the very first time in Spain. The engineering data were obtained from experiences with a trommel type dryer of about 1,000 Kg/h using pine wastes (P. pinaster), eucalyptus (Eucalyptus globulus) and furze (Ulex europeaeus) as a raw material. Besides, the consumption in chipping and milling from wastes obtained from different parts of trees such as coniferous bark, branches, etc., are also analyzed, using to that end a pilot plant about 200 Kg/h. Finally, studies on pelletizing in a plant of 2,500 Kg/h capacity have been carried out. These in-depth studies try to determine the perspectives for forestry biomass management. Likewise, we also aim at pinning down the limits in using hard materials like the eucalyptus bark, as well as to grasp the potential of this type of wastes that have not been used in Spain yet.

  20. Evaluation of pesticide residues in fruits and vegetables from Algeria.

    Science.gov (United States)

    Mebdoua, Samira; Lazali, Mohamed; Ounane, Sidi Mohamed; Tellah, Sihem; Nabi, Fahima; Ounane, Ghania

    2017-06-01

    A total of 160 samples of 13 types of fresh fruits and vegetables from domestic production and import were analysed to detect the presence of pesticide residues. Analysis was performed by multi-residual extraction followed by gas chromatography-mass spectrometry. In 42.5% of the tested samples, no residues were found and 12.5% of samples contained pesticide residues above maximum residue limits. Risk assessment for long-term exposure was done for all pesticides detected in this study. Except chlorpyrifos and lambda-cyhalothrin, exposure to pesticides from vegetables and fruits was below 1% of the acceptable daily intake. Short-term exposure assessment revealed that in seven pesticide/commodity combinations, including three pesticides (chlorpyrifos, deltamethrin and lambda-cyhalothrin), the acute reference dose had been exceeded.