WorldWideScience

Sample records for residential home builders

  1. Solar installer training: Home Builders Institute Job Corps

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, K.; Mann, R. [San Diego Job Corps Center, Imperial Beach, CA (United States). Home Builders Inst.

    1996-10-01

    The instructors describe the solar installation training program operated since 1979 by the Home Builders Institute, the Educational Arm of the National Association of Home Builders for the US Department of Labor, Job Corps in San Diego, CA. The authors are the original instructors and have developed the program since its inception by a co-operative effort between the Solar Energy Industries Association, NAHB and US DOL. Case studies of a few of the 605 students who have gone to work over the years after the training are included. It is one of the most successful programs under the elaborate Student Performance Monitoring Information System used by all Job Corps programs. Job Corps is a federally funded residential job training program for low income persons 16--24 years of age. Discussion details the curriculum and methods used in the program including classroom, shop and community service projects. Solar technologies including all types of hot water heating, swimming pool and spa as well as photovoltaics are included.

  2. Solar homebuilders program: getting builders to build solar

    Energy Technology Data Exchange (ETDEWEB)

    Parkin, B.; Allen, D.

    1981-01-01

    The homebuilding industry can open the way to wide-scale residential use of solar energy. Under the Northwest Power Act, the Department of Energy's Bonneville Power Administration, Western Solar Utilization Network and the Solar Energy Research Institute are working together with the Home Builders Association of Metropolitan Portland and the Portland chapter of the American Institute of Architects on a program that will affect 7 cities in the Pacific Northwest. Modeled after the successful Denver Metro Homebuilders Program, the project is being implemented in 3 cities in 1981 and three additional cities in 1982. In each of the 7 cities builders and developers will be provided with design, performance monitoring and marketing assistance for constructing passive solar prototypes. The result is ten passive solar homes of superior design and of an affordable price in each city. The secondary result of this program is expected to be a total of 2700 solar homes produced outside the program by builders from 1981-1985. Builders influenced to build passive solar homes outside the program could result in as many as 500,000 homes produced by the year 2000.

  3. DOE Zero Energy Ready Home Case Study: New Town Builders, Denver, Colorado

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-09-01

    All homes in the Stapleton community must be ENERGY STAR certified; New Town Builders has announced that it will build 250–300 new homes over the next 7–10 years, all of which will be Challenge Homes. New Town received a 2013 Housing Innovation Award in the production builder category.

  4. Practices and Processes of Leading High Performance Home Builders in the Upper Midwest

    Energy Technology Data Exchange (ETDEWEB)

    Von Thoma, E.; Ojczyk, C.

    2012-12-01

    The NorthernSTAR Building America Partnership team proposed this study to gain insight into the business, sales, and construction processes of successful high performance builders. The knowledge gained by understanding the high performance strategies used by individual builders, as well as the process each followed to move from traditional builder to high performance builder, will be beneficial in proposing more in-depth research to yield specific action items to assist the industry at large transform to high performance new home construction. This investigation identified the best practices of three successful high performance builders in the upper Midwest. In-depth field analysis of the performance levels of their homes, their business models, and their strategies for market acceptance were explored. All three builders commonly seek ENERGY STAR certification on their homes and implement strategies that would allow them to meet the requirements for the Building America Builders Challenge program. Their desire for continuous improvement, willingness to seek outside assistance, and ambition to be leaders in their field are common themes. Problem solving to overcome challenges was accepted as part of doing business. It was concluded that crossing the gap from code-based building to high performance based building was a natural evolution for these leading builders.

  5. Practices and Processes of Leading High Performance Home Builders in the Upper Midwest

    Energy Technology Data Exchange (ETDEWEB)

    Von Thoma, Ed [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR Building America Partnership; Ojzcyk, Cindy [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR Building America Partnership

    2012-12-01

    The NorthernSTAR Building America Partnership team proposed this study to gain insight into the business, sales, and construction processes of successful high performance builders. The knowledge gained by understanding the high performance strategies used by individual builders, as well as the process each followed to move from traditional builder to high performance builder, will be beneficial in proposing more in-depth research to yield specific action items to assist the industry at large transform to high performance new home construction. This investigation identified the best practices of three successful high performance builders in the upper Midwest. In-depth field analysis of the performance levels of their homes, their business models, and their strategies for market acceptance were explored.

  6. Evaluation of the U.S. Department of Energy Challenge Home Program Certification of Production Builders

    Energy Technology Data Exchange (ETDEWEB)

    Kerrigan, P.; Loomis, H.

    2014-09-01

    The purpose of this project was to evaluate integrated packages of advanced measures in individual test homes to assess their performance with respect to Building America Program goals, specifically compliance with the DOE Challenge Home Program. BSC consulted on the construction of five test houses by three Cold Climate production builders in three separate US cities. BSC worked with the builders to develop a design package tailored to the cost-related impacts for each builder. Therefore, the resulting design packages do vary from builder to builder. BSC provided support through this research project on the design, construction and performance testing of the five test homes. Overall, the builders have concluded that the energy related upgrades (either through the prescriptive or performance path) represent reasonable upgrades. The builders commented that while not every improvement in specification was cost effective (as in a reasonable payback period), many were improvements that could improve the marketability of the homes and serve to attract more energy efficiency discerning prospective homeowners. However, the builders did express reservations on the associated checklists and added certifications. An increase in administrative time was observed with all builders. The checklists and certifications also inherently increase cost due to: 1. Adding services to the scope of work for various trades, such as HERS Rater, HVAC contractor; 2. Increased material costs related to the checklists, especially the EPA Indoor airPLUS and EPA WaterSense(R) Efficient Hot Water Distribution requirement.

  7. Marketing and promoting solar water heaters to home builders

    Energy Technology Data Exchange (ETDEWEB)

    Keller, C.; Ghent, P.

    1999-12-06

    This is the final report of a four-task project to develop a marketing plan designed for businesses interested in marketing solar water heaters in the new home industry. This report outlines suggested marketing communication materials and other promotional tools focused on selling products to the new home builder. Information relevant to promoting products to the new home buyer is also included.

  8. DOE Zero Energy Ready Home Case Study: Thrive Home Builders, Lowry Plan

    Energy Technology Data Exchange (ETDEWEB)

    Pacific Northwest National Laboratory

    2017-09-01

    Thrive Home Builders built this 4,119-ft2 home at the Lowry development in Denver, Colorado, to the high-performance criteria of the U.S. Department of Energy’s Zero Energy Ready Home Program. Despite the dense positioning of the homes, mono-plane roof designs afforded plenty of space for the 8.68 kW of photovoltaic panels. With the PV, the home achieves a Home Energy Rating System (HERS) score of 4 and the home owners should enjoy energy bills of about $-11 a year. Without the PV, the home would score a HERS 38 (far lower than the HERS 80 to 100 of typical new homes).

  9. Evaluation of the U.S. Department of Energy Challenge Home Program Certification of Production Builders

    Energy Technology Data Exchange (ETDEWEB)

    Kerrigan, P. [Building Science Corporation, Somerville, MA (United States); Loomis, H. [Building Science Corporation, Somerville, MA (United States)

    2014-09-01

    The purpose of this project was to evaluate integrated packages of advanced measures in individual test homes to assess their performance with respect to Building America program goals, specifically compliance with the DOE Challenge Home Program. BSC consulted on the construction of five test houses by three cold climate production builders in three U.S. cities and worked with the builders to develop a design package tailored to the cost-related impacts for each builder. Also, BSC provided support through performance testing of the five test homes. Overall, the builders have concluded that the energy related upgrades (either through the prescriptive or performance path) represent reasonable upgrades. The builders commented that while not every improvement in specification was cost effective (as in a reasonable payback period), many were improvements that could improve the marketability of the homes and serve to attract more energy efficiency discerning prospective homeowners. However, the builders did express reservations on the associated checklists and added certifications. An increase in administrative time was observed with all builders. The checklists and certifications also inherently increase cost due to: adding services to the scope of work for various trades, such as HERS Rater, HVAC contractor; and increased material costs related to the checklists, especially the EPA Indoor airPLUS and EPA WaterSense® Efficient Hot Water Distribution requirement.

  10. Builders Challenge Quality Criteria Support Document

    Energy Technology Data Exchange (ETDEWEB)

    None

    2009-06-01

    This document provides guidance to U.S. home builders participating in Builders Challenge. To qualify for the Builders Challenge, a home must score 70 or less on the EnergySmart Home Scale (E-Scale). Homes also must meet the Builders Challenge Quality Cri

  11. Building America Best Practices Series Volume 8: Builders Challenge Quality Criteria Support Document

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, Michael C.; Bartlett, Rosemarie; Gilbride, Theresa L.

    2010-11-01

    The U.S. Department of Energy (DOE) has posed a challenge to the homebuilding industry—to build 220,000 high-performance homes by 2012. Through the Builders Challenge, participating homebuilders will have an easy way to differentiate their best energy-performing homes from other products in the marketplace, and to make the benefits clear to buyers. This document was prepared by Pacific Northwest National Laboratory for DOE to provide guidance to U.S. home builders who want to accept the challenge. To qualify for the Builders Challenge, a home must score 70 or less on the EnergySmart Home Scale (E-Scale). The E-scale is based on the well-established Home Energy Rating System (HERS) index, developed by the Residential Energy Services Network (RESNET). The E-scale allows homebuyers to understand – at a glance – how the energy performance of a particular home compares with the performance of others. To learn more about the index and HERS Raters, visit www.natresnet.org. Homes also must meet the Builders Challenge criteria described in this document. To help builders meet the Challenge, guidance is provided in this report for each of the 29 criteria. Included with guidance for each criteria are resources for more information and references for relevant codes and standards. The Builders Challenge Quality Criteria were originally published in Dec. 2008. They were revised and published as PNNL-18009 Rev 1.2 in Nov. 2009. This is version 1.3, published Nov 2010. Changes from the Nov 2009 version include adding a title page and updating the Energy Star windows critiera to the Version 5.0 criteria approved April 2009 and effective January 4, 2010. This document and other information about the Builders Challenge is available on line at www.buildingamerica.gov/challenge.

  12. DOE Zero Energy Ready Home Case Study: Alliance Green Builders, Casa Aguila

    Energy Technology Data Exchange (ETDEWEB)

    Pacific Northwest National Laboratory

    2017-09-01

    Alliance Green Builders built this 3,129-ft2 home in the hills above Ramona, California, to the high-performance criteria of the DOE Zero Energy Ready Home (ZERH) program. The home should perform far better than net zero thanks to a super-efficient building shell, a wind turbine, three suntracking solar photovoltaic arrays, and solar thermal water heating.

  13. DOE Zero Energy Ready Home Case Study: New Town Builders — The ArtiZEN Plan, Denver, CO

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-09-01

    The Grand Winner in the Production Builder category of the 2014 Housing Innovation Awards, this builder plans to convert all of its product lines to DOE Zero Energy Ready Home construction by the end of 2015. This home achieves HERS 38 without photovoltaics (PV) and HERS -3 with 8.0 kW of PV.

  14. Solar Heating and Cooling of Residential Buildings: Sizing, Installation and Operation of Systems.

    Science.gov (United States)

    Colorado State Univ., Ft. Collins. Solar Energy Applications Lab.

    This training course and a companion course titled "Design of Systems for Solar Heating and Cooling of Residential Buildings," are designed to train home designers and builders in the fundamentals of solar hydronic and air systems for space heating and cooling and domestic hot water heating for residential buildings. Each course, organized in 22…

  15. Preparation and production of a home builders' guide. Building and selling energy-efficient homes

    Energy Technology Data Exchange (ETDEWEB)

    Keast, D. N.; Mahoney, J. M.; McMahon, N. M.; Troy, M. H.; Wood, E. W.

    1977-06-01

    Procedures used in the preparation of a manual on the construction of energy-saving one- and two-family houses are described. Prior to writing the manual, builders were interviewed and a bibliographic search was conducted to obtain information on the design, construction and marketing of energy conserving homes. The packaging and distribution of the manual was planned. When written FEA will publish the manual. (ERA citation 04:044977)

  16. Whole-House Approach Benefits Builders, Buyers, and the Environment

    Energy Technology Data Exchange (ETDEWEB)

    2001-05-01

    This document provides an overview of the U.S. Department of Energy's Building America program. Building America works with the residential building industry to develop and implement innovative building processes and technologies-innovations that save builders and homeowners millions of dollars in construction and energy costs. This industry-led, cost-shared partnership program aims to reduce energy use by 50% and reduce construction time and waste, improve indoor air quality and comfort, encourage a systems engineering approach for design and construction of new homes, and accelerate the development and adoption of high performance in production housing.

  17. Whole-House Approach Benefits Builders, Buyers, and the Environment

    Energy Technology Data Exchange (ETDEWEB)

    Hendron, B.

    2001-01-19

    This document provides an overview of the U.S. Department of Energy's Building America program. Building America works with the residential building industry to develop and implement innovative building processes and technologies-innovations that save builders and homeowners millions of dollars in construction and energy costs. This industry-led, cost-shared partnership program aims to reduce energy use by 50% and reduce construction time and waste, improve indoor air quality and comfort, encourage a systems engineering approach for design and construction of new homes, and accelerate the development and adoption of high performance in production housing.

  18. City of Austin: Green habitat learning project. A green builder model home project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    The purpose of the Year 14 UCETF project was to design and construct a residential structure that could serve as a demonstration facility, training site, and testing and monitoring laboratory for issues related to the implementation of sustainable building practices and materials. The Model Home Project builds on the previous and existing efforts, partially funded by the UCETF, of the City of Austin Green Builder Program to incorporate sustainable building practices into mainstream building activities. The Green Builder Program uses the term {open_quotes}green{close_quotes} as a synonym for sustainability. In the research and analysis that was completed for our earlier reports in Years 12 and 13, we characterized specific elements that we associate with sustainability and, thus, green building. In general, we refer to a modified life cycle assessment to ascertain if {open_quotes}green{close_quotes} building options reflect similar positive cyclical patterns found in nature (i.e. recyclability, recycled content, renewable resources, etc.). We additionally consider economic, human health and synergistic ecological impacts associated with our building choices and characterize the best choices as {open_quotes}green.{close_quotes} Our ultimate goal is to identify and use those {open_quotes}green{close_quotes} materials and processes that provide well for us now and do not compromise similar benefits for future generations. The original partnership developed for this project shifted during the year from a project stressing advanced (many prototypical) {open_quotes}green{close_quotes} building materials and techniques in a research and demonstration context, to off-the-shelf but underutilized {open_quotes}green{close_quotes} materials in the practical social context of using {open_quotes}green{close_quotes} technologies for low income housing. That project, discussed in this report, is called the Green Habitat Learning Project.

  19. Economics worksheet for builder guidelines

    International Nuclear Information System (INIS)

    Johnson, B.K.

    1994-01-01

    The Builder Guidelines package is used to analyze space heating in residential design. Alternative designs are compared in engineering units (e.g., Btu) with the aid of four simple worksheets. Evaluating designs in economic terms would enhance understanding of decisions to be made in the consideration of several energy efficiency measures. An additional worksheet is proposed for Builder Guidelines. Six easy steps take the user through a simplified economic evaluation, based on auxiliary heating performance. Annual space heating cost, avoided costs, and years to payback are calculated in the procedure

  20. Modular Zero Energy. BrightBuilt Home

    Energy Technology Data Exchange (ETDEWEB)

    Aldrich, Robb [Steven Winter Associates, Inc., Norwalk, CT (United States); Butterfield, Karla [Steven Winter Associates, Inc., Norwalk, CT (United States)

    2016-03-01

    With funding from the Building America Program, part of the U.S. Department of Energy Building Technologies Office, the Consortium for Advanced Residential Buildings (CARB) worked with BrightBuilt Home (BBH) to evaluate and optimize building systems. CARB’s work focused on a home built by Black Bros. Builders in Lincolnville, Maine (International Energy Conservation Code Climate Zone 6). As with most BBH projects to date, modular boxes were built by Keiser Homes in Oxford, Maine.

  1. Achieving Challenge Home in Affordable Housing in the Hot-Humid Climate

    Energy Technology Data Exchange (ETDEWEB)

    Beal, D. [Building America Partnership for Improved Residential Construction, Cocoa, FL (United States); McIlvaine, J. [Building America Partnership for Improved Residential Construction, Cocoa, FL (United States); Winter, B. [Building America Partnership for Improved Residential Construction, Cocoa, FL (United States); Allnutt, R. [Building America Partnership for Improved Residential Construction, Cocoa, FL (United States)

    2014-08-01

    The Building America Partnership for Improved Residential Construction (BA-PIRC), one of the Building America research team leads, has partnered with two builders as they work through the Challenge Home certification process (now Zero Energy Ready Home) in one test home each. The builder partners participating in this cost-shared research are Southeast Volusia County Habitat for Humanity near Daytona, Florida and Manatee County Habitat for Humanity near Tampa, Florida. Both are affiliates of Habitat for Humanity International, a non-profit affordable housing organization. This research serves to identify viable technical pathways to meeting the CH criteria for other builders in the region. A further objective of this research is to identify gaps and barriers in the marketplace related to product availability, labor force capability, code issues, cost effectiveness, and business case issues that hinder or prevent broader adoption on a production scale.

  2. Implementing a Zero Energy Ready Home Multifamily Project

    Energy Technology Data Exchange (ETDEWEB)

    Springer, David [National Renewable Energy Laboratory (NREL), Golden, CO (United States); German, Alea [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2015-08-17

    Building cost-effective, high-performance homes that provide superior comfort, health, and durability is the goal of the U.S. Department of Energy’s (DOE’s) Zero Energy Ready Home (ZERH) program. Building America research and other innovative programs throughout the country have addressed many of the technical challenges of building to the ZERH standard. The cost-effectiveness of measure packages that result in 30% source energy savings compared to a code-compliant home have been demonstrated. However, additional challenges remain, particularly with respect to convincing production builders of the strong business case for ZERH. The Alliance for Residential Building Innovation (ARBI) team believes that the keys to successfully engaging builders and developers in the California market are to help them leverage development agreement requirements, code compliance requirements, incentives, and competitive market advantages of ZERH certification, and navigate through this process. A primary objective of this project was to gain a highly visible foothold for residential buildings that are built to the DOE ZERH specification that can be used to encourage participation by other California builders. This report briefly describes two single-family homes that were ZERH certified and focuses on the experience of working with developer Mutual Housing on a 62-unit multifamily community at the Spring Lake subdivision in Woodland, California. The Spring Lake project is expected to be the first ZERH-certified multifamily project in the country. This report discusses the challenges encountered, lessons learned, and how obstacles were overcome.

  3. Building America Best Practices Series: Volume 1; Builders and Buyers Handbook for Improving New Home Efficiency, Comfort, and Durability in the Hot and Humid Climate

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, M. C.; Love, P. M.

    2004-11-01

    This Building America Best Practices guide book is a resource to help builders large and small build high-quality, energy-efficient homes that achieve 30% energy savings in space conditioning and water heating in the hot and humid climate. The savings are in comparison with the 1993 Model Energy Code. The guide contains chapters for every member of the builder's team. There is also a chapter for homeowners on how to use the book to provide help in selecting a new home or builder.

  4. Building America Best Practices Series: Volume 5; Builders and Buyers Handbook for Improving New Home Efficiency, Comfort, and Durability in the Marine Climate

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, M. C.; Taylor, Z. T.; Bartlett, R.; Gilbride, T.; Hefty, M.; Steward, H.; Love, P. M.; Palmer, J. A.

    2006-10-01

    This best practices guide is part of a series produced by Building America. The guide book is a resource to help builders large and small build high-quality, energy-efficient homes that achieve 30% energy savings in space conditioning and water heating in the Marine climate region. The savings are in comparison with the 1993 Model Energy Code. The guide contains chapters for every member of the builder's team--from the manager to the site planner to the designers, site supervisors, the trades, and marketers. There is also a chapter for homeowners on how to use the book to provide help in selecting a new home or builder.

  5. Building America Best Practices Series: Volume 4; Builders and Buyers Handbook for Improving New Home Efficiency, Comfort, and Durability in the Mixed-Humid Climate

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, M. C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Z. T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bartlett, R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gilbride, T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hefty, M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Steward, H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Love, P. M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Palmer, J. A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2005-09-01

    This best practices guide is part of a series produced by Building America. The guide book is a resource to help builders large and small build high-quality, energy-efficient homes that achieve 30% energy savings in space conditioning and water heating in the mixed-humid climate region. The savings are in comparison with the 1993 Model Energy Code. The guide contains chapters for every member of the builders team-from the manager to the site planner to the designers, site supervisors, the trades, and marketers. There is also a chapter for homeowners on how to use the book to provide help in selecting a new home or builder.

  6. Building America Best Practices Series, Volume 6: High-Performance Home Technologies: Solar Thermal & Photovoltaic Systems

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, Michael C.; Gilbride, Theresa L.; Ruiz, Kathleen A.; Steward, Heidi E.; Love, Pat M.

    2007-06-04

    This guide is was written by PNNL for the US Department of Energy's Building America program to provide information for residential production builders interested in building near zero energy homes. The guide provides indepth descriptions of various roof-top photovoltaic power generating systems for homes. The guide also provides extensive information on various designs of solar thermal water heating systems for homes. The guide also provides construction company owners and managers with an understanding of how solar technologies can be added to their homes in a way that is cost effective, practical, and marketable. Twelve case studies provide examples of production builders across the United States who are building energy-efficient homes with photovoltaic or solar water heating systems.

  7. Integrated and Optimized Energy-Efficient Construction Package for a Community of Production Homes in the Mixed-Humid Climate

    Energy Technology Data Exchange (ETDEWEB)

    Mallay, D. [Partnership for Home Innovation, Upper Marlboro, MD (United States); Wiehagen, J. [Partnership for Home Innovation, Upper Marlboro, MD (United States); Del Bianco, M. [Partnership for Home Innovation, Upper Marlboro, MD (United States)

    2014-10-01

    This research high performance home analyzes how a set of advanced technologies can be integrated into a durable and energy-efficient house in the mixed-humid climate while remaining affordable to homeowners. The technical solutions documented in this report are the cornerstone of the builder's entire business model based on delivering high-performance homes on a production basis as a standard product offering to all price segments of the residential market. Home Innovation Research Labs partnered with production builder Nexus EnergyHomes (CZ 4) and they plan to adopt the successful components of the energy solution package for all 55 homes in the community. The research objective was to optimize the builder's energy solution package based on energy performance and construction costs. All of the major construction features, including envelope upgrades, space conditioning system, hot water system, and solar electric system were analyzed.

  8. Builder experience with low-cost high-value passive solar

    International Nuclear Information System (INIS)

    Aitken, D.W.; Neuffer, P.

    1993-01-01

    This article reports on passive solar tract home construction in the Reno, Nevada, area, that has enhanced the builder's market, made buying a home more affordable for the entry-level customer and made living in that home more attractive, displaced energy at $1.50/MMBtu, and attracted the local utility into seriously considering offering cash incentives for the construction and sale of those homes as a very cost-effective gas demand side management program. The builder's solar models, costs and marketing experience are described, and the utility's economic analysis is presented

  9. Achieving Challenge Home in Affordable Housing in the Hot-Humid Climate

    Energy Technology Data Exchange (ETDEWEB)

    Beal, D.; McIlvaine, J.; Winter, B.; Allnutt, R.

    2014-08-01

    The Building America Partnership for Improved Residential Construction (BA-PIRC), one of the Building America research team leads, has partnered with two builders as they work through the Challenge Home certification process in one test home each. The builder partners participating in this cost-shared research are Southeast Volusia County Habitat for Humanity near Daytona, Florida and Manatee County Habitat for Humanity near Tampa, Florida. Both are affiliates of Habitat for Humanity International, a non-profit affordable housing organization. This research serves to identify viable technical pathways to meeting the CH criteria for other builders in the region. A further objective of this research is to identify gaps and barriers in the marketplace related to product availability, labor force capability, code issues, cost effectiveness, and business case issues that hinder or prevent broader adoption on a production scale.

  10. The incidence of depression and its risk factors in Dutch nursing homes and residential care homes.

    Science.gov (United States)

    Boorsma, Marijke; Joling, Karlijn; Dussel, Martine; Ribbe, Miel; Frijters, Dinnus; van Marwijk, Harm W J; Nijpels, Giel; van Hout, Hein

    2012-11-01

    Although it is known that depression is highly prevalent in institutionalized older adults, little is known about its incidence and risk factors in nursing homes and residential care homes. The aim of this study was to investigate and compare the incidence and associated risk factors for depression in Dutch nursing homes and residential care homes. Data on depression were extracted from the Vrije Universiteit naturalistic cohort on routine care monitoring with the Minimum Data Set of the Resident Assessment Instrument. A total of 1,324 residents in six nursing homes and 1,723 residents in 23 residential care homes with an average follow-up of 1.2 years. Depression was defined as a clinical diagnosis according to Diagnostic and Statistical Manual of Mental Disorders, Fourth Edition, criteria and the use of antidepressants. Residents with prevalent depression at baseline were excluded. The incidence rate was 13.6 per 100 person years in the nursing homes and 10.2 per 100 person years in the residential care homes. The independent risk factors for in-home depression for residents in nursing homes included dementia (OR: 1.7; 95% CI: 1.02-2.95) and a score of 3 or more on the Depression Rating Scale (odds ratio [OR]: 2.1; 95% confidence interval [CI]: 1.23-3.70). A protective effect was seen on the use of a hearing aid (OR: 0.3; 95% CI: 0.12-0.80). In the residential care homes, being male (OR: 2.1; 95% CI: 1.27-3.30), having cancer (OR: 2.9; 95% CI: 1.64-4.95), and a score of 2 or higher on the Cognitive Performance Scale (OR: 1.5; 95% CI: 1.05-2.22) increased the risk to develop depression. Age greater than 85 years (OR: 0.5; 95% CI: 0.31-0.67) and hearing impairment (OR: 0.8; 95% CI: 0.60-1.00) appeared to be protective. The incidence rate for depression in residents of Dutch nursing homes and residential care homes was high and the associated risk factors found may have important implications for staff. 2012 American Association for Geriatric Psychiatry

  11. Building America Best Practices Series: Volume 3; Builders and Buyers Handbook for Improving New Home Efficiency, Comfort, and Durability in Cold and Very Cold Climates

    Energy Technology Data Exchange (ETDEWEB)

    2005-08-01

    This best practices guide is part of a series produced by Building America. The guide book is a resource to help builders large and small build high-quality, energy-efficient homes that achieve 30% energy savings in space conditioning and water heating in the cold and very cold climates. The savings are in comparison with the 1993 Model Energy Code. The guide contains chapters for every member of the builder's team-from the manager to the site planner to the designers, site supervisors, the trades, and marketers. There is also a chapter for homeowners on how to use the book to provide help in selecting a new home or builder.

  12. Texas ''Recycled Content''/Advanced Green Builder Demonstration Home Project

    International Nuclear Information System (INIS)

    Fisk, P. III; Vittori, G.

    1993-01-01

    This paper presents an overview of principal issues addressed in the Advanced Green Builder Demonstration Home Project, with units to be constructed in Austin and Laredo. The project's objective is to introduce these distinct communities to a range of ''green'' housing materials and methods, emphasizing opportunities for recycled-content and by-product based construction materials. The project, principally funded by U.S. Department of Energy Oil Overcharge Funds administered by the Texas Governor's Energy Office, also is supported by several state, regional, and municipal agencies. As such, the project reflects a regional process, as open to adaptation to a region's natural resources as it is to its peoples. The design is specifically intended to bridge issues of social and family concerns, such as affordability, expandibility, and economic development. This is a result of a modular-based design framework, coupled with reliance on environmentally-conscious regional manufacture of by-product based materials. Environmental issues are addressed by establishing a user for pollutants considered major contributors to global concerns of acid rain (due to release of sulphur dioxide), global warming (due to release of carbon dioxide), and deforestation. The homes will be built without virgin wood products or portland cement

  13. Residential Photovoltaic Energy Systems in California: The Effect on Home Sales Prices

    Energy Technology Data Exchange (ETDEWEB)

    Hoen, Ben; Wiser, Ryan; Thayer, Mark; Cappers, Peter

    2012-04-15

    Relatively little research exists estimating the marginal impacts of photovoltaic (PV) energy systems on home sale prices. Using a large dataset of California homes that sold from 2000 through mid-2009, we find strong evidence, despite a variety of robustness checks, that existing homes with PV systems sold for a premium over comparable homes without PV systems, implying a near full return on investment. Premiums for new homes are found to be considerably lower than those for existing homes, implying, potentially, a tradeoff between price and sales velocity. The results have significant implications for homeowners, builders, appraisers, lenders, and policymakers.

  14. Taking the Challenge at Singer Village. A Cold Climate Zero Energy Ready Home

    Energy Technology Data Exchange (ETDEWEB)

    Puttagunta, S. [Consortium for Advanced Residential Buildings, Norwalk, CT (United States); Faakye, O. [Consortium for Advanced Residential Buildings, Norwalk, CT (United States)

    2014-10-01

    After progressively incorporating ENERGY STAR® for Homes Versions 1, 2, and 3 into its standard practices over the years, this builder, Brookside Development, was seeking to build an even more sustainable product that would further increase energy efficiency, while also addressing indoor air quality, water conservation, renewable-ready, and resiliency. These objectives align with the framework of the DOE Challenge Home program, which "builds upon the comprehensive building science requirements of ENERGY STAR for Homes Version 3, along with proven Building America innovations and best practices. Other special attribute programs are incorporated to help builders reach unparalleled levels of performance with homes designed to last hundreds of years." Consortium for Advanced Residential Buildings (CARB) partnered with Brookside Development on the design optimization and construction of the first home in a small development of seven planned new homes being built on the old Singer Estate in Derby, CT.

  15. Supporting Photovoltaics in Market-Rate Residential NewConstruction: A Summary of Programmatic Experience to Date and LessonsLearned

    Energy Technology Data Exchange (ETDEWEB)

    Barbose, Galen; Wiser, Ryan; Bolinger, Mark

    2006-02-10

    As a market segment for solar photovoltaic (PV) adoption, new homes have a number of attractive attributes. Homebuyers can easily roll the cost of the PV system into their tax-deductible home mortgage and, with rebates and other financial incentives, potentially achieve an immediate net-positive cash flow from the investment. New homes are amenable to building-integrated photovoltaics (BIPV), which are less susceptible to aesthetic concerns than traditional, rack-mounted systems. The performance of PV systems can be optimized on new homes by taking roof orientation and shading into account when designing the home. Perhaps most importantly, subdivisions with PV systems installed on a large number of homes offer potential cost savings from volume purchases of modules and inverters and from scale economies in system design and installation. Finally, the ability of builders to install PV as a standard feature on multiple homes in new subdivisions offers an opportunity to circumvent the high transaction costs and information-related market barriers typically confronted when each individual homeowner must make a decision about installing PV. Builders may benefit in several ways from incorporating PV into new homes. Builders may gain greater market differentiation, enhanced media exposure, and less community or political opposition to development projects. Additionally, if homebuyers place a high value on PV, builders may be able to earn additional profits, just as they would on granite countertops or other high-value home features. Although the impact of PV on the original sale price of new homes has not yet been rigorously examined, some limited empirical evidence does suggest that PV and energy efficient features may have a positive effect on resale value. Along with its unique advantages, residential new construction also faces unique barriers to PV adoption. Most fundamentally, perhaps, is the general aversion to technology risk within the building industry

  16. Integrated and Optimized Energy-Efficient Construction Package for a Community of Production Homes in the Mixed-Humid Climate

    Energy Technology Data Exchange (ETDEWEB)

    Mallay, D.; Wiehagen, J.; Del Bianco, M.

    2014-10-01

    Selection and integration of high performance home features are two sides of the same coin in energy efficient sustainable construction. Many advanced technologies are available for selection, but it is in the integration of these technologies into an affordable set of features that can be used on a production basis by builders, that ensures whole-house performance meets expectations. This research high performance home analyzes how a set of advanced technologies can be integrated into a durable and energy efficient house in the mixed-humid climate while remaining affordable to homeowners. The technical solutions documented in this report are the cornerstone of the builder's entire business model based on delivering high-performance homes on a production basis as a standard product offering to all price segments of the residential market. Home Innovation Research Labs partnered with production builder Nexus EnergyHomes (CZ 4). The builder plans to adopt the successful components of the energy solution package for all 55 homes in the community. The research objective was to optimize the builder's energy solution package based on energy performance and construction costs. All of the major construction features, including envelope upgrades, space conditioning system, hot water system, and solar electric system were analyzed. The information in this report can be used by builders and designers to evaluate options, and the integration of options, for increasing the efficiency of home designs in climate zone 4. The data also provide a point of reference for evaluating estimates of energy savings and costs for specific features.

  17. Building America Case Study: New Town Builders' Power of Zero Energy Center, Denver, Colorado (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2014-10-01

    New Town Builders, a builder of energy efficient homes in Denver, Colorado, offers a zero energy option for all the homes it builds. To attract a wide range of potential homebuyers to its energy efficient homes, New Town Builders created a 'Power of Zero Energy Center' linked to its model home in the Stapleton community of Denver. This case study presents New Town Builders' marketing approach, which is targeted to appeal to homebuyers' emotions rather than overwhelming homebuyers with scientific details about the technology. The exhibits in the Power of Zero Energy Center focus on reduced energy expenses for the homeowner, improved occupant comfort, the reputation of the builder, and the lack of sacrificing the homebuyers' desired design features to achieve zero net energy in the home. The case study also contains customer and realtor testimonials related to the effectiveness of the Center in influencing homebuyers to purchase a zero energy home.

  18. Census Business Builder (CBB)

    Science.gov (United States)

    Employment and Payroll Survey of Business Owners Work from Home Our statistics highlight trends in household statistics from multiple surveys. Data Tools & Apps Main American FactFinder Census Business Builder My Classification Codes (i.e., NAICS) Economic Census Economic Indicators Economic Studies Industry Statistics

  19. Building America Best Practices Series: Volume 2. Builders and Buyers Handbook for Improving New Home Efficiency, Comfort, and Durability in the Hot-Dry and Mixed-Dry Climates

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, M. C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Taylor, Z. T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bartlett, R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Gilbride, T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hefty, M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Love, P. M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2005-09-01

    This best practices guide is part of a series produced by Building America. The guidebook is a resource to help builders large and small build high-quality, energy-efficient homes that achieve 30% energy savings in space conditioning and water heating in the hot-dry and mixed-dry climates. The savings are in comparison with the 1993 Model Energy Code. The guide contains chapters for every member of the builder's team—from the manager to the site planner to the designers, site supervisors, the trades, and marketers. There is also a chapter for homeowners on how to use the book to provide help in selecting a new home or builder.

  20. New Whole-House Solutions Case Study: New Town Builders' Power of Zero Energy Center - Denver, Colorado

    Energy Technology Data Exchange (ETDEWEB)

    None

    2014-10-01

    New Town Builders, a builder of energy efficient homes in Denver, Colorado, offers a zero energy option for all the homes it builds. To attract a wide range of potential homebuyers to its energy efficient homes, New Town Builders created a "Power of Zero Energy Center" linked to its model home in the Stapleton community. This case study presents New Town Builders' marketing approach, which is targeted to appeal to homebuyers' emotions rather than overwhelming homebuyers with scientific details about the technology. The exhibits in the Power of Zero Energy Center focus on reduced energy expenses for the homeowner, improved occupant comfort, the reputation of the builder, and the lack of sacrificing the homebuyers' desired design features to achieve zero net energy in the home. This case study also contains customer and realtor testimonials related to the effectiveness of the Center in influencing homebuyers to purchase a zero energy home.

  1. DOE Zero Energy Ready Home Case Study: Sterling Brook Custom Homes — Village Park Eco Home, Double Park, TX

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-09-01

    This builder won a Custom Builder honor in the 2014 Housing Innovation Awards for this showcase home that serves as an energy-efficient model home for the custom home builder: 1,300 visitors toured the home, thousands more learned about the home’s advanced construction via the webpage, YouTube, Twitter, Facebook, Instagram, and Pinterest.

  2. Invisible Elderly in Danish and Swedish Residential Care Home Architecture

    DEFF Research Database (Denmark)

    E Andersson, Jonas; Grangaard, Sidse

    2015-01-01

    This study of two architectural competitions suggests that the fit between architectural design and older users, who depend on regular caregiving due to cognitive or functional disabilities, requires a particular consideration when designing new residential care homes.......This study of two architectural competitions suggests that the fit between architectural design and older users, who depend on regular caregiving due to cognitive or functional disabilities, requires a particular consideration when designing new residential care homes....

  3. Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Cold Climates

    Energy Technology Data Exchange (ETDEWEB)

    Building Industry Research Alliance (BIRA); Building Science Consortium (BSC); Consortium for Advanced Residential Buildings (CARB); Florida Solar Energy Center (FSEC); IBACOS; National Renewable Energy Laboratory (NREL)

    2006-08-01

    The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in Cold Climates on a cost-neutral basis.

  4. DOE Zero Energy Ready Home Case Study: Mandalay Homes, Phoenix, Arizona

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-09-01

    This builder built fourteen homes in the Gordon Estates subdivision that achieved Challenge Home certification with HERS 38–58 on an affordable budget for homeowners. Every Mandalay home in the development also met the National Green Building Standard gold level. The Gordon Estates subdivision is also serving as a showcase of energy efficiency, and Mandalay is hosting education workshops for realtors, state and local officials, other builders, students, potential homeowners, and the public. The builder won a 2013 Housing Innovation Award in the affordable builder category.

  5. DOE Zero Energy Ready Home Case Study: One Sky Homes — Cottle Zero Net Energy Home, San Jose, CA

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-09-01

    This builder took home the Grand Winner prize in the Custom Builder category in the 2014 Housing Innovation Awards for its high performance building science approach. The builder used insulated concrete form blocks to create the insulated crawlspace foundation for its first DOE Zero Energy Ready Home, the first net zero energy new home certified in the state of California.

  6. Becoming at home in residential care for older people: a material culture perspective.

    Science.gov (United States)

    Lovatt, Melanie

    2018-02-01

    Residential homes encourage new residents to bring belongings with them, so that they can personalise their room and 'feel at home'. Existing literature on material culture in residential homes views objects as symbols and repositories of home and identity, which can facilitate a sense of belonging in residents through their display in residents' rooms. I suggest that this both misunderstands the processual and fluid nature of home and identity, and conceptualises objects as essentially passive. This article uses ethnographic data and theories of practice and relationality to argue that rather than the meaning of home being inherent in objects, or felt subjectively by residents, meaning is generated through ongoing, everyday interactions between the two. I show that residents became at home by acquiring new things -as well as displaying existing possessions - and also through interacting with mundane objects in everyday social and relational practices such as cleaning and hosting. I conclude that being at home in older people's residential homes need not be so different from being at home at other stages of the life course and in other settings. This challenges conceptualisations of older people's homes - and older age itself - as somehow unknowable and unfamiliar. © 2018 Foundation for the Sociology of Health & Illness.

  7. Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Marine Climates; January 2006 - December 2006

    Energy Technology Data Exchange (ETDEWEB)

    Building America Industrialized Housing Partnership (BAIHP); Building Industry Research Alliance (BIRA); Building Science Consortium (BSC); Consortium for Advanced Residential Buildings (CARB); Davis Energy Group (DEG); IBACOS; National Association of Home Builders Research Center (NAHBRC); National Renewable Energy Laboratory (NREL)

    2006-12-01

    The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Marine Climate Region on a cost neutral basis.

  8. Airborne concentrations of Polybrominated diethyl etherin residential homes

    Directory of Open Access Journals (Sweden)

    S. Rahimzadeh

    2009-07-01

    Full Text Available Background and aims   Polybrominated diphenyl ethers (PBDE have been widely applied to different home and offices' appliances as flame retardant additives to inhibit ignition and enhance  the fire safety. Their toxicity, health effects, and resistance to environmental degradation are  matters of great interested among scientists. Airborne concentrations of PBDE in residential  homes were determined in this study.   Methods   In a cross sectional study, 33 residential homes were selected and airborne concentrations of PBDEs were investigated using PUF disk passive air samplers. Also in two building the concentraction of PBDEs were monitored in two rooms of a department in each building for 12 months.   Results   Average airborne concentration of ?PBDE (sum of congener #s 17, 28, 47, 49, 66, 85, 99, 100, 153, and 154 for all locations monitored was 52 (4-245 pgm -3 . While in one of the buildings the contaminant level of bedroom was significantly higher than the living room, PBDE   concentrations remained relatively constant for whole monitoring period.   Conclusion   The range of concentrations results to a wide variation between inhalation intakes of dwellers of the lowest and the highest contaminated homes (~50 folds.  

  9. In-home performance of residential cordwood stoves

    International Nuclear Information System (INIS)

    Houck, J.E.; Barnett, S.G.; Roholt, R.B.

    1991-01-01

    The air quality impacts of residential cordwood stoves have been of concern to regulators, energy planners, and members of the woodstove industry. In addition, the reliability of laboratory certification emission values in predicting 'real world' emissions has been questioned. In response to these concerns, particulate emissions from residential cordwood stoves under actual in-home use have been measured for 5 heating seasons as part of 12 separate studies in Oregon, New York, Vermont, and the Yukon Territory. Monitoring was conducted using an automated emission sampler (AES) system. The system has been deployed in nearly 100 individual homes. Typically, emissions from several 1-week-long integrated sampling periods over the course of the heating season were measured with the AES system at each home. Particulate emission rates in grams of particles per hour of stove operation, grams of particles per kilogram of dry wood burned, and grams of particles per million Joules were calculated. Ancillary data provided by the studies included wood burn rates, homeowner wood loading patterns, wood moisture content and species, hours of operation of auxiliary heating appliances in the study homes, room ambient, flue gas, catalyst, and pre-catalyst temperatures, and hours of catalyst operation. Conventional stoves, high-technology non-catalytic stoves, catalytic stoves, and stoves equipped with retrofit catalytic devices have been studied. In addition to the 12 cordwood stove studies, the AES system has been used in 2 pellet stove studies and 1 fireplace study

  10. Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Mixed-Humid Climates; January 2006 - December 2006

    Energy Technology Data Exchange (ETDEWEB)

    Building America Industrialized Housing Partnership (BAIHP); Building Industry Research Alliance (BIRA); Building Science Consortium (BSC); Consortium for Advanced Residential Buildings (CARB); Davis Energy Group (DEG); IBACOS; National Association of Home Builders Research Center (NAHBRC); National Renewable Energy Laboratory (NREL)

    2006-12-01

    The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Mixed-Humid Climate Region on a cost-neutral basis.

  11. Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in the Hot-Dry and Mixed-Dry Climates

    Energy Technology Data Exchange (ETDEWEB)

    Building Industry Research Alliance (BIRA); Building Science Consortium (BSC); Consortium for Advanced Residential Buildings (CARB); Davis Energy Group (DEG); Florida Solar Energy Center (FSEC); IBACOS; National Association of Home Builders Research Center (NAHBRC); National Renewable Energy Laboratory (NREL)

    2006-01-01

    The Building America program conducts the system research required to reduce risks associated with the design and construction of homes that use an average of 30% to 90% less total energy for all residential energy uses than the Building America Research Benchmark, including research on homes that will use zero net energy on annual basis. To measure the program's progress, annual research milestones have been established for five major climate regions in the United States. The system research activities required to reach each milestone take from 3 to 5 years to complete and include research in individual test houses, studies in pre-production prototypes, and research studies with lead builders that provide early examples that the specified energy savings level can be successfully achieved on a production basis. This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Hot-Dry/Mixed-Dry Climate Region on a cost neutral basis.

  12. Summary of Green Building Programs

    Energy Technology Data Exchange (ETDEWEB)

    2002-08-01

    In early 2002, the National Association of Home Builders completed a census of residential green building programs across the United States to assess differences and similarities among programs. This report catalogs different ways that builders participate in residential green building programs.

  13. Building America Best Practices Series: Volume 4; Builders and Buyers Handbook for Improving New Home Efficiency, Comfort, and Durability in the Mixed-Humid Climate

    Energy Technology Data Exchange (ETDEWEB)

    None

    2005-09-01

    This guide book is a resource to help builders large and small build high-quality, energy-efficient homes that achieve 30% energy savings in space conditioning and water heating in the mixed-humid climate region.

  14. Building America Best Practices Series: Volume 5; Builders and Buyers Handbook for Improving New Home Efficiency, Comfort, and Durability in the Marine Climate

    Energy Technology Data Exchange (ETDEWEB)

    None

    2006-10-01

    This best practices guide is part of a series produced by Building America. The guide book is a resource to help builders large and small build high-quality, energy-efficient homes that achieve 30% energy savings in the Marine climate region.

  15. Expressions of Prayer in Residential Care Homes.

    Science.gov (United States)

    Reimer-Kirkham, Sheryl; Sharma, Sonya; Smith, Brenda; Schutt, Kelly; Janzen, Kyla

    2018-01-01

    Although the value of spiritual care in the care of older adults is supported by research, few studies have focused specifically on prayer in residential care settings. This ethnographic study with fifteen chaplains and administrators in eleven residential care homes involved analyses of walking interviews and research diaries. Findings revealed the spaces in which prayer happens and the forms it takes. The identities of chaplains-their own spiritual practices, religious beliefs, and positioning within the facility-shaped their dis/comfort with prayer and how they located prayer within public and private spaces. Where organizational leadership endorsed the legitimacy of chaplaincy services, prayer was more likely to be offered. Even in these circumstances, however, religious diversity and questions about secularism left chaplains ambivalent about the appropriateness of prayer. The results demonstrate the relevance of religion and spirituality to residential care, and illustrate how prayer functions as an opportunity for connection and understanding.

  16. Recommended Ventilation Strategies for Energy-Efficient Production Homes

    Energy Technology Data Exchange (ETDEWEB)

    Roberson, J.; Brown, R.; Koomey, J.; Warner, J.; Greenberg, S.

    1998-12-01

    This report evaluates residential ventilation systems for the U.S. Environmental Protection Agency's (EPA's) ENERGY STAR{reg_sign} Homes program and recommends mechanical ventilation strategies for new, low-infiltration, energy-efficient, single-family, ENERGY STAR production (site-built tract) homes in four climates: cold, mixed (cold and hot), hot humid, and hot arid. Our group in the Energy Analysis Department at Lawrence Berkeley National Lab compared residential ventilation strategies in four climates according to three criteria: total annualized costs (the sum of annualized capital cost and annual operating cost), predominant indoor pressure induced by the ventilation system, and distribution of ventilation air within the home. The mechanical ventilation systems modeled deliver 0.35 air changes per hour continuously, regardless of actual infiltration or occupant window-opening behavior. Based on the assumptions and analysis described in this report, we recommend independently ducted multi-port supply ventilation in all climates except cold because this strategy provides the safety and health benefits of positive indoor pressure as well as the ability to dehumidify and filter ventilation air. In cold climates, we recommend that multi-port supply ventilation be balanced by a single-port exhaust ventilation fan, and that builders offer balanced heat-recovery ventilation to buyers as an optional upgrade. For builders who continue to install forced-air integrated supply ventilation, we recommend ensuring ducts are airtight or in conditioned space, installing a control that automatically operates the forced-air fan 15-20 minutes during each hour that the fan does not operate for heating or cooling, and offering ICM forced-air fans to home buyers as an upgrade.

  17. Demonstration of Hydrogen Energy Network and Fuel Cells in Residential Homes

    International Nuclear Information System (INIS)

    Hirohisa Aki; Tetsuhiko Maeda; Itaru Tamura; Akeshi Kegasa; Yoshiro Ishikawa; Ichiro Sugimoto; Itaru Ishii

    2006-01-01

    The authors proposed the setting up of an energy interchange system by establishing energy networks of electricity, hot water, and hydrogen in residential homes. In such networks, some homes are equipped with fuel cell stacks, fuel processors, hydrogen storage devices, and large storage tanks for hot water. The energy network enables the flexible operation of the fuel cell stacks and fuel processors. A demonstration project has been planned in existing residential homes to evaluate the proposal. The demonstration will be presented in a small apartment building. The building will be renovated and will be equipped with a hydrogen production facility, a hydrogen interchange pipe, and fuel cell stacks with a heat recovery device. The energy flow process from hydrogen production to consumption in the homes will be demonstrated. This paper presents the proposed energy interchange system and demonstration project. (authors)

  18. Implementing a Zero Energy Ready Home Multifamily Project

    Energy Technology Data Exchange (ETDEWEB)

    Springer, David [Alliance for Residential Building Innovation, Davis, CA (United States); German, Alea [Alliance for Residential Building Innovation, Davis, CA (United States)

    2015-08-01

    An objective of this project was to gain a highly visible foothold for residential buildings built to the U.S. Department of Energy's Zero Energy Ready Home (ZERH) specification that can be used to encourage participation by other California builders. This report briefly describes two single family homes that were ZERH-certified, and focuses on the experience of working with developer Mutual Housing on a 62 unit multi-family community at the Spring Lake subdivision in Woodland, CA. The Spring Lake project is expected to be the first ZERH certified multi-family project nationwide. This report discusses challenges encountered, lessons learned, and how obstacles were overcome.

  19. The incidence of depression and its risk factors in Dutch nursing homes and residential care homes

    NARCIS (Netherlands)

    Boorsma, M.; Joling, K.J.; Dussel, M.; Ribbe, M.W.; Frijters, D.H.M.; van Marwijk, H.W.J.; Nijpels, G.; van Hout, H.P.J.

    2012-01-01

    Objective: Although it is known that depression is highly prevalent in institutionalized older adults, little is known about its incidence and risk factors in nursing homes and residential care homes. The aim of this study was to investigate and compare the incidence and associated risk factors for

  20. Closed Crawl Space Performance: Proof of Concept in the Production Builder Marketplace

    Energy Technology Data Exchange (ETDEWEB)

    Malkin-Weber, Melissa; Dastur, Cyrus; Mauceri, Maria; Hannas, Benjamin

    2008-10-30

    performance characteristics with regard to infiltration and duct leakage. Researchers settled on two closed crawl space designs, one with insulation located in the framed floor structure above the crawl space and one with insulation on the crawl space perimeter wall, as the designs with the most widespread potential for application. Researchers based this assessment not only on the field performance, but also on input from residential builders, pest control professionals, code officials, installers, and building scientists active in the region. The key findings from the field demonstration were that (1) closed crawl spaces stay substantially drier than traditional wall-vented crawl spaces during humid climate conditions, and (2) the houses built on the closed crawl space foundations saved, on average, 15% or more on annual energy used for space heating and cooling. A comparison of the actual energy performance of the homes versus the performance predicted by a popular HERS software application showed that the software was unable to predict the demonstrated savings, in some cases predicting an energy penalty. Findings from the 2005 project were summarized in a publication titled Closed Crawl Spaces: An Introduction to Design, Construction and Performance. Since its release, the publication has received widespread use by builders, homeowners, installers and code officials concerned about crawl space construction. The findings were also used to create major revisions to the NC Residential Code, which were adopted in 2004 and immediately began to reduce the regulatory barriers to widespread commercialization of the technology in NC, particularly in new residential construction. Full project details are located at www.crawlspaces.org.

  1. Psychotropic medication in a randomly selected group of citizens receiving residential or home care

    DEFF Research Database (Denmark)

    Futtrup, Tina Bergmann; Schultz, Hanne; Jensen, Margit Bak

    2014-01-01

    INTRODUCTION: Treatment with one or more psychotropic medications (PMs), especially in the elderly, is associated with risk, and the effects of treatment are poorly validated. The aim of this article was to describe the use of PM in a population of citizens receiving either residential care or home...... care with focus on the prevalence of drug use, the combination of different PMs and doses in relation to current recommendations. METHODS: The medication lists of 214 citizens receiving residential care (122) and home care (92) were collected together with information on age, gender and residential...

  2. Building America Best Practices Series: Volume 1; Builders and Buyers Handbook for Improving New Home Efficiency, Comfort, and Durability in the Hot and Humid Climate

    Energy Technology Data Exchange (ETDEWEB)

    None

    2004-12-01

    This Building America Best Practices guide book is a resource to help builders large and small build high-quality, energy-efficient homes that achieve 30% energy savings in space conditioning and water heating in the hot and humid climate.

  3. Building America Best Practices Series: Volume 3; Builders and Buyers Handbook for Improving New Home Efficiency, Comfort, and Durability in the Cold and Very Cold Climates

    Energy Technology Data Exchange (ETDEWEB)

    None

    2005-08-01

    The guide book is a resource to help builders large and small build high-quality, energy-efficient homes that achieve 30% energy savings in space conditioning and water heating in the cold and very cold climates.

  4. New American Home(regsign): Atlanta, Georgia - 2001; Building America--The New American Home

    International Nuclear Information System (INIS)

    IBACOS; Anderson, R.

    2001-01-01

    The New American Home(reg s ign) is an annual showcase project designed by committee and co-sponsored by the National Association of Home Builders' National Council of the Housing Industry, BUILDERS Magazine, and Ladies Home Journal. Hedgewood Properties teamed with Building America's IBACOS Consortium and Southface Energy Institute to build a house with a Home Energy Rating Systems (HERS) level of 90

  5. 'The Taste Buddies': Participation and empowerment in a residential home for older people

    NARCIS (Netherlands)

    Baur, V.E.; Abma, T.A.

    2012-01-01

    The active participation and autonomy of older people living in residential homes is considered to be problematic. However, in our action research project conducted in a Dutch residential care organisation we found ways to enhance residents' direct participation. This form of participation is

  6. Building America Best Practices Series: Volume 2; Builders and Buyers Handbook for Improving New Home Efficiency, Comfort, and Durability in the Hot-Dry and Mixed-Dry Climates

    Energy Technology Data Exchange (ETDEWEB)

    None

    2005-09-01

    This guidebook is a resource to help builders large and small build high-quality, energy-efficient homes that achieve 30% energy savings in space conditioning and water heating in the hot-dry and mixed-dry climates.

  7. Business Metrics for High-Performance Homes: A Colorado Springs Case Study

    Energy Technology Data Exchange (ETDEWEB)

    Beach, R. [IBACOS, Inc, Pittsburgh, PA (United States); Jones, A. [IBACOS, Inc, Pittsburgh, PA (United States)

    2016-04-26

    This report explores the correlation between energy efficiency and the business success of home builders by examining a data set of builders and homes in the Colorado Springs, Colorado, market between 2006 and 2014. During this time, the Great Recession of 2007 to 2009 occurred, and new-home sales plummeted both nationally and in Colorado Springs. What is evident from an analysis of builders and homes in Colorado Springs is that builders who had Home Energy Rating System (HERS) ratings performed on some or all of their homes during the Recession remained in business during this challenging economic period. Many builders who did not have HERS ratings performed on their homes at that time went out of business or left the area. From the analysis presented in this report, it is evident that a correlation exists between energy efficiency and the business success of home builders, although the reasons for this correlation remain largely anecdotal and not yet clearly understood.

  8. What Do They Do at Home? The Literacies of Children Living in Residential Care in Malaysia

    Science.gov (United States)

    Tan, Jennifer

    2015-01-01

    This paper presents an ethnographic study of the out of school literacy practices of children living in residential care in Malaysia. Although residential homes generate much publicity, especially during the festive seasons, not much is known about the children living within the confines of these homes. Even more lacking is research on their…

  9. The environmental design of residential care facilities: A sense of home through the eyes of nursing home residents.

    NARCIS (Netherlands)

    J. van Hoof; B.M Janssen; MD E.J.M. Wouters; C.J.M.L. van Dijck-Heinen

    2014-01-01

    C.J.M.L. van Dijck-Heinen, E.J.M. Wouters, B.M. Janssen, J. van Hoof (2014) The environmental design of residential care facilities: A sense of home through the eyes of nursing home residents. International Journal for Innovative Research in Science & Technology 1(4): 57-69

  10. DOE Zero Energy Ready Home Case Study: Mandalay Homes — Pronghorn Ranch, Prescott Valley, AZ

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-09-01

    The builder has certified 20 homes to DOE Zero Energy Ready Home program and plans are underway for 50 more. Winner of a Production Builder prize in the 2014 Housing Innovation Awards, the homes achieved a HERS score of 48 without photovoltaics (PV) or HERS 25 with 3.5 kW PV included.

  11. Mortality and health services utilisation among older people with advanced cognitive impairment living in residential care homes.

    Science.gov (United States)

    Luk, James K H; Chan, W K; Ng, W C; Chiu, Patrick K C; Ho, Celina; Chan, T C; Chan, Felix H W

    2013-12-01

    To study the demography, clinical characteristics, service utilisation, mortality, and predictors of mortality in older residential care home residents with advanced cognitive impairment. Cohort longitudinal study. Residential care homes for the elderly in Hong Kong West. Residents of such homes aged 65 years or more with advanced cognitive impairment. In all, 312 such residential care home residents (71 men and 241 women) were studied. Their mean age was 88 (standard deviation, 8) years and their mean Barthel Index 20 score was 1.5 (standard deviation, 2.0). In all, 164 (53%) were receiving enteral feeding. Nearly all of them had urinary and bowel incontinence. Apart from Community Geriatric Assessment Team clinics, 119 (38%) of the residents attended other clinics outside their residential care homes. In all, 107 (34%) died within 1 year; those who died within 1 year used significantly more emergency and hospital services (P<0.001), and utilised more services from community care nurses for wound care (P=0.001), enteral feeding tube care (P=0.018), and urinary catheter care (P<0.001). Independent risk factors for 1-year mortality were active pressure sores (P=0.0037), enteral feeding (P=0.008), having a urinary catheter (P=0.0036), and suffering from chronic obstructive pulmonary disease (P=0.011). A history of pneumococcal vaccination was protective with respect to 1-year mortality (P=0.004). Residents of residential care homes for the elderly with advanced cognitive impairment were frail, exhibited multiple co-morbidities and high mortality. They were frequent users of out-patient, emergency, and in-patient services. The development of end-of-life care services in residential care homes for the elderly is an important need for this group of elderly.

  12. Use of 222Rn-resistant techniques in new home construction

    International Nuclear Information System (INIS)

    Watson, J.E. Jr.; Cote, R.A.

    1999-01-01

    The objective of this project was to assess the status of the use of 222 Rn-resistant construction techniques in new home construction in the eight Zone 1 counties of North Carolina. Zone 1 counties have an average predicted indoor 222 Rn screening potential greater than 148 Bq m -3 (4 pCi L -1 ). To facilitate a response from builders, a brief survey form was designed and printed on the back of a self-addressed, postage-paid postcard. This survey form was mailed to 460 home builders in the Zone 1 counties. The response rate was 17%, which can be compared to the 4.9% response rate obtained in a national survey conducted by the National Association of Home Builders Research Center. In their survey, 62% of the responding builders reported that they had built some or many homes in 1996 using construction techniques to reduce the entry of radon into homes, but only 10% of the builders reported using these techniques for many homes. The National Association of Home Builders survey determined that, nationally, 30% of homes built in Zone 1 counties had 222 Rn venting features. There is the potential for bias in the results of their survey (as well as in the results of the National Association of Home Builders survey) since the response rates were low

  13. Building Green the Right Way

    Science.gov (United States)

    Lewis, C. Deana

    2009-01-01

    As the workforce development arm of the National Association of Home Builders (NAHB), and cluster leader for the Architecture and Construction career cluster, Home Builders Institute (HBI) has a vested interest in keeping America's elementary, middle and high school students excited and knowledgeable about what's new in residential construction.…

  14. Sustainability of Physical Activity Promoting Environments and Influences on Sustainability Following a Structural Intervention in Residential Children's Homes

    Science.gov (United States)

    Dominick, Gregory M.; Tudose, Alina; Pohlig, Ryan T.; Saunders, Ruth P.

    2016-01-01

    Research examining sustainability of health promotion programs within organizational settings is limited. The Environmental Interventions in Residential Children's Homes (ENRICH) was a structural intervention that trained Wellness Teams (WTs) within residential children's homes (RCH) to target environmental changes that promote physical activity…

  15. DOE Zero Energy Ready Home Case Study: KB Homes, San Marcos, California

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-09-01

    Designed to produce as much energy as it uses, the ZeroHouse incorporates a PV system, R-15 fiberglass batts in walls, and slab-on-grade foundation. The builder ranked fifth in the nation on Builder Magazine’s 2012 Top 100 ranking of U.S. home builders based on number of housing starts, and won a 2013 Housing Innovation Award in the production builder category.

  16. DOE Zero Energy Ready Home Case Study: Amerisips Homes — Miller-Bloch Residence, Johns Island, SC

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-09-01

    For this DOE Zero Energy Ready Home that won a Custom Builder award in the 2014 Housing Innovation Awards, the builder uses structural insulated panels to construct the entire building shell, including the roof, walls, and floor of the home.

  17. Hypertension in a residential home for the elderly in Penang, Malaysia.

    Science.gov (United States)

    Ong, H T; Oung, L S; Ong, L M; Tan, K P S

    2010-03-01

    A study of residents at the Silver Jubilee Home for the Aged was conducted to determine the prevalence, awareness and control of hypertension in this elderly community in Penang, Malaysia. Prevalence of hypertension was 36%, with 81% of patients being initially aware of this diagnosis. This relatively low hypertension prevalence rate may be because residents have a fairly sheltered lifestyle with less social stress and a daily routine that incorporates adequate exercise. Similarly, the high hypertension awareness rate compared to reported figures in the community may be because residents are more regularly monitored by the attending medical care-givers. At the beginning of the study, only 34% of hypertensive patients were well controlled with a blood pressure less than 140/90 mm Hg. This proportion rose to 53% at the end of study period. Compliance is better at a residential home because medication is served by their care-givers and cost is absorbed in this charitable organization. Our study suggests that hypertension awareness and control can be reasonable for the elderly in a residential home.

  18. End-of-life care for advanced dementia patients in residential care home-a Hong Kong perspective.

    Science.gov (United States)

    Luk, James K H; Chan, Felix H W

    2017-08-28

    Dementia will become more common as the population ages. Advanced dementia should be considered as a terminal illnesses and end-of-life (EOL) care is very much needed for this disease group. Currently, the EOL services provided to this vulnerable group in Hong Kong, especially those living in residential care homes, is limited. The usual practice of residential care homes is to send older residents with advanced dementia to acute hospitals when they are sick, irrespective of their wish, premorbid status, diagnoses and prognosis. This may not accord with what the patients perceive to be a "good death". There are many barriers for older people to die in place, both at home and at the residential care home. In the community, to enhance EOL care to residential care home for the elderly (RCHE) residents, pilot EOL program had been carried out by some Community Geriatric Assessment Teams. Since 2015, the Hospital Authority funded program "Enhance Community Geriatric Assessment Team Support to End-of-life Patients in Residential Care Homes for the Elderly" has been started. In the program, advance care planning (ACP), Do Not Attempt Cardiopulmonary Resuscitation (DNACPR) (non-hospitalized) order will be established and the program will be expected to cover all clusters in Hong Kong by 2018/2019. In hospital setting, EOL clinical plan and EOL ward in geriatric step-down hospitals may be able to improve the quality of death of older patients. In Sep 2015, the Hospital Authority Guidelines on Life-Sustaining Treatment in the Terminally Ill was updated. Amongst other key EOL issues, careful (comfort) hand feeding was mentioned in the guideline. Other new developments include the possible establishment of enduring power of attorney for health care decision and enhancement of careful hand feeding amongst advanced dementia patients in RCHEs.

  19. Privacy and senior willingness to adopt smart home information technology in residential care facilities.

    Science.gov (United States)

    Courtney, K L

    2008-01-01

    With large predicted increases of the older adult (65 years and older) population, researchers have been exploring the use of smart home information technologies (IT) in residential care (RC) facilities to enhance resident quality of life and safety. Older adults' perceptions of privacy can inhibit their acceptance and subsequent adoption of smart home IT. This qualitative study, guided by principles of grounded theory research, investigated the relationship between privacy, living environment and willingness of older adults living in residential care facilities to adopt smart home IT through focus groups and individual interviews. The findings from this study indicate that privacy can be a barrier for older adults' adoption of smart home IT; however their own perception of their need for the technology may override their privacy concerns. Privacy concerns, as a barrier to technology adoption, can be influenced by both individual-level and community-level factors. Further exploration of the factors influencing older adults' perceptions of smart home IT need is necessary.

  20. Designing a place called home reordering the suburbs

    CERN Document Server

    Wentling, James

    2017-01-01

    This insightful volume shares design ideas to help builders, planners and architects create mass-produced affordable housing that pushes suburban development in more sustainable, liveable directions. The author argues that improving the quality of design in our new homes and communities for greater resiliency, sustainability, and equality, we can build neighborhoods and communities where residents feel more connected t their homes and to one another. Through text, photographs and illustrations, the book reviews prototypical American housing design, then suggest ways to both learn from the past as well as adapt for new environmental imperatives, demographic changes and lifestyle needs. Written by a practicing architect with 25+ years of experience optimizing residential design, this pioneering approach to suburban building will inspire readers to view mass produced housing through a new, modern lens.

  1. DOE Zero Energy Ready Home Case Study: Promethean Homes — Gross-Shepard Residence, Charlottesville, VA

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-09-01

    This is the first DOE Zero Energy Ready Home for this builder, who earned a Custom Builder honor in the 2014 Housing Innovation Awards. The home included rigid mineral wool board insulation over house wrap and plywood on the 2x6 advanced framed walls, achieving HERS 33 without PV.

  2. THE BUILDER?S LIABILITY BEYOND THE DEFECTS LIABILITY

    Directory of Open Access Journals (Sweden)

    Johnson I IKPO

    2005-01-01

    Full Text Available This paper reviews the obligations of a builder after the expiration of the contracted defects liability period using relevant decided cases. The common areas identified as forming the bedrock of litigation pertain to structural and dimensional stability, freedom from damp, durability, adequate drainage, good waste disposal works, and effective service installations. Particular reference is made to walls, roofs, and services, which from the pilot study account for about 46%, 23%, and 17% respectively of the total defects attributable to the builder. It is concluded that the builder is responsible for defects arising from his product till the effluxion of reasonable time, except he establishes an element of contributory negligence.

  3. Spiritual Needs of Elderly Living in Residential/Nursing Homes

    Directory of Open Access Journals (Sweden)

    Nora-Beata Erichsen

    2013-01-01

    Full Text Available While the research on spiritual needs of patients with chronic and life-threatening diseases increases, there is limited knowledge about psychosocial and spiritual needs of elderly living in residential/nursing homes. We were interested in which needs were of relevance at all, and how these needs are related to life satisfaction and mood states. For that purpose we enrolled 100 elderly living in residential/nursing homes (mean age years, 82% women and provided standardized questionnaires, that is, Spiritual Needs Questionnaire (SpNQ, Brief Multidimensional Life Satisfaction Scale (BMLSS, Quality of Life in Elders with Multimorbidity (FLQM questionnaire, and a mood states scale (ASTS. Religious needs and Existential needs were of low relevance, while inner peace needs were of some and needs for giving/generativity of highest relevance. Regression analyses revealed that the specific needs were predicted best by religious trust and mood states, particularly tiredness. However, life satisfaction and quality of life were not among the significant predictors. Most had the intention to connect with those who will remember them, although they fear that there is limited interest in their concerns. It remains an open issue how these unmet needs can be adequately supported.

  4. DOE Zero Energy Ready Home Case Study: Cobblestone Homes — 2014 Model Home, Midland, MI

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-09-01

    This builder's first DOE Zero Energy Ready Home won a Custom Builder award in the 2014 Housing Innovation Awards, scored HERS 49 without PV or HERS 44 with 1.4 kW of PV, and served as a prototype and energy efficiency demonstration model while performance testing was conducted.

  5. From home to 'home': Mapping the caregiver journey in the transition from home care into residential care.

    Science.gov (United States)

    Hainstock, Taylor; Cloutier, Denise; Penning, Margaret

    2017-12-01

    Family caregivers play a pivotal role in supporting the functional independence and quality of life of older relatives, often taking on a wide variety of care-related activities over the course of their caregiving journey. These activities help family members to remain in the community and age-in-place for as long as possible. However, when needs exceed family capacities to provide care, the older family member may need to transition from one care environment to another (e.g., home care to nursing home care), or one level of care to another (from less intense to more intensive services). Drawing upon qualitative interview data collected in a populous health region in British Columbia, Canada, this study explores the roles and responsibilities of family caregivers for family members making the care transition from home care to residential care. A thematic analysis of the interview transcripts resulted in the development of a conceptual framework to characterize the "Caregiver Journey" as a process that could be divided into at least three phases: 1) Precursors to transition - recognizing frailty in family members and caregivers prior to transition; 2) Preparing to transition into residential nursing home care (RC) and 3) Post-transition: Finding a new balance - where caregivers adjust and adapt to new caregiving responsibilities. Our analyses revealed that the second phase is the most complex involving a consideration of the various activities, and roles that family caregivers take on to prepare for the care transition including: information gathering, advocacy and system navigation. We conclude that there is a need for family caregivers to be better supported during care transitions; notably through ongoing and enhanced investments in strategies to support caregiver communication and education. Crown Copyright © 2017. Published by Elsevier Inc. All rights reserved.

  6. Building America Best Practices Series Volume 12: Builders Challenge Guide to 40% Whole-House Energy Savings in the Cold and Very Cold Climates

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, Michael C.; Gilbride, Theresa L.; Hefty, Marye G.; Cole, Pamala C.; Love, Pat M.

    2011-02-01

    This best practices guide is the twelfth in a series of guides for builders produced by PNNL for the U.S. Department of Energy’s Building America program. This guide book is a resource to help builders design and construct homes that are among the most energy-efficient available, while addressing issues such as building durability, indoor air quality, and occupant health, safety, and comfort. With the measures described in this guide, builders in the cold and very cold climates can build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers. The best practices described in this document are based on the results of research and demonstration projects conducted by Building America’s research teams. Building America brings together the nation’s leading building scientists with over 300 production builders to develop, test, and apply innovative, energy-efficient construction practices. Building America builders have found they can build homes that meet these aggressive energy-efficiency goals at no net increased costs to the homeowners. Currently, Building America homes achieve energy savings of 40% greater than the Building America benchmark home (a home built to mid-1990s building practices roughly equivalent to the 1993 Model Energy Code). The recommendations in this document meet or exceed the requirements of the 2009 IECC and 2009 IRC and thos erequirements are highlighted in the text. This document will be distributed via the DOE Building America website: www.buildingamerica.gov.

  7. Building America Best Practices Series, Volume 9: Builders Challenge Guide to 40% Whole-House Energy Savings in the Hot-Dry and Mixed-Dry Climates

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, Michael C.; Gilbride, Theresa L.; Hefty, Marye G.; Williamson, Jennifer L.; Ruiz, Kathleen A.; Bartlett, Rosemarie; Love, Pat M.

    2009-10-23

    This best practices guide is the ninth in a series of guides for builders produced by the U.S. Department of Energy’s Building America Program. This guide book is a resource to help builders design and construct homes that are among the most energy-efficient available, while addressing issues such as building durability, indoor air quality, and occupant health, safety, and comfort. With the measures described in this guide, builders in the hot-dry and mixed-dry climates can achieve homes that have whole house energy savings of 40% over the Building America benchmark (a home built to mid-1990s building practices roughly equivalent to the 1993 Model Energy Code) with no added overall costs for consumers. These best practices are based on the results of research and demonstration projects conducted by Building America’s research teams. The guide includes information for managers, designers, marketers, site supervisors, and subcontractors, as well as case studies of builders who are successfully building homes that cut energy use by 40% in the hot-dry and mixed-dry climates.

  8. DOE Zero Energy Ready Home Case Study: Nexus EnergyHomes, Frederick, Maryland

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-09-01

    This urban infill community with 24 duplexes, 19 townhomes, and 7 single-family homes features SIP walls, geothermal heat pumps, solar PV, and a proprietary energy management system. The builder won a 2013 Housing Innovation Award in the production builder category.

  9. Care staff training in detection of depression in residential homes for the elderly - Randomised trial

    NARCIS (Netherlands)

    Eisses, AMH; Kluiter, H; Jongenelis, K; Beekman, ATF; Ormel, J

    Background. Many people with depression in residential care homes for the elderly do not receive treatment because their depression remains undetected. Aims. To determine the effects of staff training on the detection, treatment and outcome of depression in residents often homes. Method. We

  10. Building with passive solar: an application guide for the southern homeowner and builder

    Energy Technology Data Exchange (ETDEWEB)

    None

    1981-03-01

    This instructional material was prepared for training workshops for builders and home designers. It includes: fundamental definitions and equations, climate and site studies, building components, passive systems and techniques, and design tools. (MHR)

  11. Care staff training in detection of depression in residential homes for the elderly: randomised trial

    NARCIS (Netherlands)

    Eisses, A.M.H.; Kluiter, H.; Jongenelis, K.; Pot, A.M.; Beekman, A.T.F.; Ormel, J.

    2005-01-01

    Background: Many people with depression in residential care homes for the elderly do not receive treatment because their depression remains undetected. Aims: To determine the effects of staff training on the detection, treatment and outcome of depression in residents of ten homes. Method: We

  12. Performance House -- A Cold Climate Challenge Home

    Energy Technology Data Exchange (ETDEWEB)

    Puttagunta, S.; Grab, J.; Williamson, J.

    2013-08-01

    Working with builder partners on a test homes allows for vetting of whole-house building strategies to eliminate any potential unintended consequences prior to implementing these solution packages on a production scale. To support this research, CARB partnered with Preferred Builders Inc. on a high-performance test home in Old Greenwich, CT. The philosophy and science behind the 2,700 ft2 'Performance House' was based on the premise that homes should be safe, healthy, comfortable, durable, efficient, and adapt with the homeowners. The technologies and strategies used in the 'Performance House' were not cutting-edge, but simply 'best practices practiced'. The focus was on simplicity in construction, maintenance, and operation. When seeking a 30% source energy savings targets over a comparable 2009 IECC code-built home in the cold climate zone, nearly all components of a home must be optimized. Careful planning and design are critical. To help builders and architects seeking to match the performance of this home, a step-by-step guide through the building shell components of DOE's Challenge Home are provided in a pictorial story book. The end result was a DOE Challenge Home that achieved a HERS Index Score of 20 (43 without PV, the minimum target was 55 for compliance). This home was also awarded the 2012 HOBI for Best Green Energy Efficient Home from the Home Builders & Remodelers Association of Connecticut.

  13. The Performance House - A Cold Climate Challenge Home

    Energy Technology Data Exchange (ETDEWEB)

    Puttagunta, S. [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States); Grab, J. [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States); Williamson, J. [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States)

    2013-08-01

    Working with builder partners on test homes allows for vetting of whole-house building strategies to eliminate any potential unintended consequences prior to implementing these solution packages on a production scale. To support this research, CARB partnered with Preferred Builders Inc. on a high-performance test home in Old Greenwich, CT. The philosophy and science behind the 2,700 ft2 "Performance House" was based on the premise that homes should be safe, healthy, comfortable, durable, efficient, and adapt with the homeowners. The technologies and strategies used in the "Performance House" were not cutting-edge, but simply "best practices practiced". The focus was on simplicity in construction, maintenance, and operation. When seeking a 30% source energy savings targets over a comparable 2009 IECC code-built home in the cold climate zone, nearly all components of a home must be optimized. Careful planning and design are critical. To help builders and architects seeking to match the performance of this home, a step-by-step guide through the building shell components of DOE's Challenge Home are provided in a pictorial story book. The end result was a DOE Challenge Home that achieved a HERS Index Score of 20 (43 without PV, the minimum target was 55 for compliance). This home was also awarded the 2012 HOBI for Best Green Energy Efficient Home from the Home Builders & Remodelers Association of Connecticut.

  14. Heating, Ventilation, and Air Conditioning Design Strategy for a Hot-Humid Production Builder

    Energy Technology Data Exchange (ETDEWEB)

    Kerrigan, P. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2014-03-01

    BSC worked directly with the David Weekley Homes - Houston division to redesign three floor plans in order to locate the HVAC system in conditioned space. The purpose of this project is to develop a cost effective design for moving the HVAC system into conditioned space. In addition, BSC conducted energy analysis to calculate the most economical strategy for increasing the energy performance of future production houses. This is in preparation for the upcoming code changes in 2015. The builder wishes to develop an upgrade package that will allow for a seamless transition to the new code mandate. The following research questions were addressed by this research project: 1. What is the most cost effective, best performing and most easily replicable method of locating ducts inside conditioned space for a hot-humid production home builder that constructs one and two story single family detached residences? 2. What is a cost effective and practical method of achieving 50% source energy savings vs. the 2006 International Energy Conservation Code for a hot-humid production builder? 3. How accurate are the pre-construction whole house cost estimates compared to confirmed post construction actual cost? BSC and the builder developed a duct design strategy that employs a system of dropped ceilings and attic coffers for moving the ductwork from the vented attic to conditioned space. The furnace has been moved to either a mechanical closet in the conditioned living space or a coffered space in the attic.

  15. Leisure, functional disability and depression among older Chinese living in residential care homes.

    Science.gov (United States)

    Ouyang, Zheng; Chong, Alice M L; Ng, Ting Kin; Liu, Susu

    2015-01-01

    Previous research has rarely examined the intervening and buffering effects of leisure on the relationship between age-related stress and health among institutionalized elders, especially in the Chinese context. This study thus examines the extent to which participation in leisure activities mediates and moderates the impact of functional disability on depression among older adults living in residential care homes in China. A total of 1429 participants (858 men) aged over 60 living in residential care homes, of which 46.1% experienced depression using a cut-off score ≥ 5 on the 15-item Geriatric Depression Scale, were selected from a national survey across China by using the probability proportional to size sampling method. The findings showed that depression was positively predicted by functional disability and negatively predicted by participation in leisure activities. The results of the mediation analysis showed that participation in leisure activities partially mediated the relationship between functional disability and depression. Functional disability predicted depression both directly and indirectly through its negative influence on participation in leisure activities. Participation in leisure activities also significantly buffered the relationship between functional disability and depression such that the impact of functional disability was weaker for those who participated in leisure activities more frequently. These results provide support for the mediating and moderating roles of leisure in the stress-health relationship among institutionalized elders. To enhance residents' psychological health, residential care homes are recommended to organize more leisure activities.

  16. Building America Best Practices Series Volume 11. Builders Challenge Guide to 40% Whole-House Energy Savings in the Marine Climate

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, Michael C.; Gilbride, Theresa L.; Hefty, Marye G.; Cole, Pamala C.; Williamson, Jennifer L.; Love, Pat M.

    2010-09-01

    This best practices guide is the eleventh in a series of guides for builders produced by the U.S. Department of Energy’s Building America Program. This guide book is a resource to help builders design and construct homes that are among the most energy-efficient available, while addressing issues such as building durability, indoor air quality, and occupant health, safety, and comfort. With the measures described in this guide, builders in the marine climate (portions of Washington, Oregon, and California) can achieve homes that have whole house energy savings of 40% over the Building America benchmark (a home built to mid-1990s building practices roughly equivalent to the 1993 Model Energy Code) with no added overall costs for consumers. These best practices are based on the results of research and demonstration projects conducted by Building America’s research teams. The guide includes information for managers, designers, marketers, site supervisors, and subcontractors, as well as case studies of builders who are successfully building homes that cut energy use by 40% in the marine climate. This document is available on the web at www.buildingamerica.gov. This report was originally cleared 06-29-2010. This version is Rev 1 cleared in Nov 2010. The only change is the reference to the Energy Star Windows critieria shown on pg 8.25 was updated to match the criteria - Version 5.0, 04/07/2009, effective 01/04/2010.

  17. Heating, Ventilation, and Air Conditioning Design Strategy for a Hot-Humid Production Builder

    Energy Technology Data Exchange (ETDEWEB)

    Kerrigan, P. [Building Science Corporation, Somerville, MA (United States)

    2014-03-01

    Building Science Corporation (BSC) worked directly with the David Weekley Homes - Houston division to develop a cost-effective design for moving the HVAC system into conditioned space. In addition, BSC conducted energy analysis to calculate the most economical strategy for increasing the energy performance of future production houses in preparation for the upcoming code changes in 2015. This research project addressed the following questions: 1. What is the most cost effective, best performing and most easily replicable method of locating ducts inside conditioned space for a hot-humid production home builder that constructs one and two story single family detached residences? 2. What is a cost effective and practical method of achieving 50% source energy savings vs. the 2006 International Energy Conservation Code for a hot-humid production builder? 3. How accurate are the pre-construction whole house cost estimates compared to confirmed post construction actual cost?

  18. DOE Zero Energy Ready Home Case Study: Garbett Homes, Herriman, Utah

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-09-01

    As the first net zero-energy production home certified in Utah, this house incorporates two 94% efficient tankless water heaters and two roof-mounted solar panels that preheat the home's water supply. This home won a 2013 Housing Innovation Award in the production builder category.

  19. Integrating Features of Islamic Traditional Home and Smart Home

    Directory of Open Access Journals (Sweden)

    Mona El Basyouni

    2017-06-01

    Full Text Available Architecture is a mirror that reflects the various elements of its environment and surroundings, such as climate, geographical characteristics, standard architectural principles, and social, cultural and scientific developments. Muslims of different regions were able, through architecture, to portray their temperaments and environments, free of external influence and guarantee life goals for users. Every day, building owners and occupants experience the constant challenges of comfort, convenience, cost, productivity, performance and sustainability. Owners, designers, builders, and operators are continuously faced with new processes, technologies and offerings to help them achieve better building performance. Since an intelligent building is run by a “system of systems” that is integrated to deliver a higher level of operational efficiency and an improved set of user-interface tools than are usually found in traditional building automation; at the other hand Arab homes with Islamic Identity guarantee all life goals for use.. Hence, this research focus on the smart environmental treatments of Islamic features for traditional architecture in Arabs homes, features of smart home and life goals for resident users.Trying to achieve a methodology combining them for enriching Arab experience of traditional architecture and its architectural results, with the modern trends of smart architecture. This combination aims at creating a residential model combining the benefits and features of Arab Islamic identity and intelligent design.

  20. U.S. Department of Energy Zero Energy Ready Home Implementation

    Energy Technology Data Exchange (ETDEWEB)

    Rothgeb, Stacey K [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Schirber, T. [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR Building America Partnership; Mosiman, G. [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR Building America Partnership; VonThoma, E. [Univ. of Minnesota, St. Paul, MN (United States). NorthernSTAR Building America Partnership

    2017-07-25

    The intention of this project is to assist home builders in the upper Midwest in achieving DOE Zero Energy Ready Home program certification, and to document the process and outcomes involved in meeting this rigorous standard. NorthernSTAR, in conjunction with our program partner Building Knowledge, Inc., provided technical support to the builders during the design and construction process. At the time of this publication, four qualifying homes have been completed and an additional three are currently under construction to be completed later this year. Three additional homes were excluded from certification due to the HVAC contractor not completing their required credentialing until after completion of the homes, though the energy performance would have otherwise qualified the homes for program certification. Both Amaris Homes and Cobblestone Homes note that participation in the ZERH program provides them with competitive advantage in the market place at reasonable construction costs that also result in extremely satisfied clients who are willing to recommend the builders to friends and family.

  1. Modeling the Association Between Home Care Service Use and Entry Into Residential Aged Care: A Cohort Study Using Routinely Collected Data.

    Science.gov (United States)

    Jorgensen, Mikaela; Siette, Joyce; Georgiou, Andrew; Warland, Andrew; Westbrook, Johanna

    2018-02-01

    To examine home care service-related and person-based factors associated with time to entry into permanent residential aged care. Longitudinal cohort study using routinely collected client management data. A large aged care service provider in New South Wales and the Australian Capital Territory, Australia. A total of 1116 people aged 60 years and older who commenced home care services for higher-level needs between July 1, 2015 and June 30, 2016. Survival analysis methods were used to examine service-related and person-based factors that were associated with time between first home care service and entry into permanent residential aged care. Predictors included service hours per week, combination of service types, demographics, needs, hospital leave, and change in care level. Cluster analysis was used to determine patterns of types of services used. By December 31, 2016, 21.1% of people using home care services had entered into permanent residential care (n = 235). After adjusting for significant factors such as age and care needs, each hour of service received per week was associated with a 6% lower risk of entry into residential care (hazard ratio = 0.94, 95% confidence interval 0.90-0.98). People who were predominant users of social support services, those with an identified carer, and those born in a non-main English-speaking country also remained in their own homes for longer. Greater volume of home care services was associated with significantly delayed entry into permanent residential care. This study provides much-needed evidence about service outcomes that could be used to inform older adults' care choices. Crown Copyright © 2017. Published by Elsevier Inc. All rights reserved.

  2. The Consortium of Advanced Residential Buildings (CARB) - A Building America Energy Efficient Housing Partnership

    Energy Technology Data Exchange (ETDEWEB)

    Robb Aldrich; Lois Arena; Dianne Griffiths; Srikanth Puttagunta; David Springer

    2010-12-31

    This final report summarizes the work conducted by the Consortium of Advanced Residential Buildings (CARB) (http://www.carb-swa.com/), one of the 'Building America Energy Efficient Housing Partnership' Industry Teams, for the period January 1, 2008 to December 31, 2010. The Building America Program (BAP) is part of the Department of Energy (DOE), Energy Efficiency and Renewable Energy, Building Technologies Program (BTP). The long term goal of the BAP is to develop cost effective, production ready systems in five major climate zones that will result in zero energy homes (ZEH) that produce as much energy as they use on an annual basis by 2020. CARB is led by Steven Winter Associates, Inc. with Davis Energy Group, Inc. (DEG), MaGrann Associates, and Johnson Research, LLC as team members. In partnership with our numerous builders and industry partners, work was performed in three primary areas - advanced systems research, prototype home development, and technical support for communities of high performance homes. Our advanced systems research work focuses on developing a better understanding of the installed performance of advanced technology systems when integrated in a whole-house scenario. Technology systems researched included: - High-R Wall Assemblies - Non-Ducted Air-Source Heat Pumps - Low-Load HVAC Systems - Solar Thermal Water Heating - Ventilation Systems - Cold-Climate Ground and Air Source Heat Pumps - Hot/Dry Climate Air-to-Water Heat Pump - Condensing Boilers - Evaporative condensers - Water Heating CARB continued to support several prototype home projects in the design and specification phase. These projects are located in all five program climate regions and most are targeting greater than 50% source energy savings over the Building America Benchmark home. CARB provided technical support and developed builder project case studies to be included in near-term Joule Milestone reports for the following community scale projects: - SBER Overlook at

  3. Estimating length of stay in publicly-funded residential and nursing care homes: a retrospective analysis using linked administrative data sets.

    Science.gov (United States)

    Steventon, Adam; Roberts, Adam

    2012-10-31

    Information about how long people stay in care homes is needed to plan services, as length of stay is a determinant of future demand for care. As length of stay is proportional to cost, estimates are also needed to inform analysis of the long-term cost effectiveness of interventions aimed at preventing admissions to care homes. But estimates are rarely available due to the cost of repeatedly surveying individuals. We used administrative data from three local authorities in England to estimate the length of publicly-funded care homes stays beginning in 2005 and 2006. Stays were classified into nursing home, permanent residential and temporary residential. We aggregated successive placements in different care home providers and, by linking to health data, across periods in hospital. The largest group of stays (38.9%) were those intended to be temporary, such as for rehabilitation, and typically lasted 4 weeks. For people admitted to permanent residential care, median length of stay was 17.9 months. Women stayed longer than men, while stays were shorter if preceded by other forms of social care. There was significant variation in length of stay between the three local authorities. The typical person admitted to a permanent residential care home will cost a local authority over £38,000, less payments due from individuals under the means test. These figures are not apparent from existing data sets. The large cost of care home placements suggests significant scope for preventive approaches. The administrative data revealed complexity in patterns of service use, which should be further explored as it may challenge the assumptions that are often made.

  4. Estimating length of stay in publicly-funded residential and nursing care homes: a retrospective analysis using linked administrative data sets

    Directory of Open Access Journals (Sweden)

    Steventon Adam

    2012-10-01

    Full Text Available Abstract Background Information about how long people stay in care homes is needed to plan services, as length of stay is a determinant of future demand for care. As length of stay is proportional to cost, estimates are also needed to inform analysis of the long-term cost effectiveness of interventions aimed at preventing admissions to care homes. But estimates are rarely available due to the cost of repeatedly surveying individuals. Methods We used administrative data from three local authorities in England to estimate the length of publicly-funded care homes stays beginning in 2005 and 2006. Stays were classified into nursing home, permanent residential and temporary residential. We aggregated successive placements in different care home providers and, by linking to health data, across periods in hospital. Results The largest group of stays (38.9% were those intended to be temporary, such as for rehabilitation, and typically lasted 4 weeks. For people admitted to permanent residential care, median length of stay was 17.9 months. Women stayed longer than men, while stays were shorter if preceded by other forms of social care. There was significant variation in length of stay between the three local authorities. The typical person admitted to a permanent residential care home will cost a local authority over £38,000, less payments due from individuals under the means test. Conclusions These figures are not apparent from existing data sets. The large cost of care home placements suggests significant scope for preventive approaches. The administrative data revealed complexity in patterns of service use, which should be further explored as it may challenge the assumptions that are often made.

  5. DOE Zero Energy Ready Home Case Study: Dwell Development, Seattle, Washington

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-09-01

    This Challenge Home is one of 42 homes in a micro-community of ultra-modern, energy-efficient homes built by Dwell Development on an urban gray-field site in South Seattle. Every home will achieve a 5-Star Built Green rating from the regional master builders association and meet the criteria of the Northwest ENERGY STAR program, which is more strict than the national ENERGY STAR criteria. Also, the home won a 2013 Housing Innovation Award in the "systems builder" category.

  6. Multi-Residential Activity Labelling in Smart Homes with Wearable Tags Using BLE Technology.

    Science.gov (United States)

    Mokhtari, Ghassem; Anvari-Moghaddam, Amjad; Zhang, Qing; Karunanithi, Mohanraj

    2018-03-19

    Smart home platforms show promising outcomes to provide a better quality of life for residents in their homes. One of the main challenges that exists with these platforms in multi-residential houses is activity labeling. As most of the activity sensors do not provide any information regarding the identity of the person who triggers them, it is difficult to label the sensor events in multi-residential smart homes. To deal with this challenge, individual localization in different areas can be a promising solution. The localization information can be used to automatically label the activity sensor data to individuals. Bluetooth low energy (BLE) is a promising technology for this application due to how easy it is to implement and its low energy footprint. In this approach, individuals wear a tag that broadcasts its unique identity (ID) in certain time intervals, while fixed scanners listen to the broadcasting packet to localize the tag and the individual. However, the localization accuracy of this method depends greatly on different settings of broadcasting signal strength, and the time interval of BLE tags. To achieve the best localization accuracy, this paper studies the impacts of different advertising time intervals and power levels, and proposes an efficient and applicable algorithm to select optimal value settings of BLE sensors. Moreover, it proposes an automatic activity labeling method, through integrating BLE localization information and ambient sensor data. The applicability and effectiveness of the proposed structure is also demonstrated in a real multi-resident smart home scenario.

  7. DOE Zero Energy Ready Home Case Study: Weiss Building & Development, Downers Grove, Illinois

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-09-01

    This single-family home built in a peat bog has underground storage tanks and drainage tanks, blown fiberglass insulation, coated rigid polyisocyanurate, and flashing. The 3,600-square-foot custom home built by Weiss Building & Development LLC is the first home in Illinois certified to the DOE Challenge Home criteria, which requires that homes meet the EPA Indoor airPlus guidelines.The builder won a 2013 Housing Innovation Award in the custom builder category.

  8. TaC Studios New Construction Test House

    Energy Technology Data Exchange (ETDEWEB)

    Butler, T. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States); Curtis, O. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States); Kim, E. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States); Roberts, S. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States); Stephenson, R. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States)

    2013-03-01

    As part of the NAHB Research Center Industry Partnership, Southface partnered with TaC Studios, an Atlanta based architecture firm specializing in residential and light commercial design, on the construction of a new test home in Atlanta, GA, in the mixed humid climate zone. This home will serve as a model home for the builder partner and addresses Building America energy savings targets through the planning and implementation of a design package will serve as a basis of design for the builder partner’s future homes. As a BA test house, this home will be evaluated to detail whole house energy use, end use loads, and HVAC and hot water efficiency.

  9. The psychology of home environments: a call for research on residential space.

    Science.gov (United States)

    Graham, Lindsay T; Gosling, Samuel D; Travis, Christopher K

    2015-05-01

    Homes are important: People devote much of their thought, time, and resources to selecting, modifying, and decorating their living spaces, and they may be devastated when their homes must be sold or are destroyed. Yet the empirical psychological literature says virtually nothing about the roles that homes might play in people's lives. We argue that homes provide an informative context for a wide variety of studies examining how social, developmental, cognitive, and other psychological processes play out in a consequential real-world setting. The topic of homes is also well suited to collaborations with a diverse array of disciplines ranging from architecture and engineering to sociology and law. We illustrate the potential insights to be gained from studying homes with an exploratory study that maps the psychological ambiances (e.g., romance, comfort, togetherness) that people desire in their homes; we identify six broad ambiance dimensions (restoration, kinship, storage, stimulation, intimacy, productivity) that show mean differences across rooms. We connect these findings to existing work on situation selection in emotion regulation. These ideas provide only an initial foray into the domain of residential space, but they hint at the productive roles that homes and other spaces could play in psychological theorizing and research. © The Author(s) 2015.

  10. From shop fronts to home offices: Entrepreneurship and small business dynamics in urban residential neighbourhoods

    NARCIS (Netherlands)

    Folmer, E.C.

    2014-01-01

    This dissertation is about neighbourhood economies of urban residential neighbourhoods: it is about the people, the places and the institutions that shape neighbourhood economies. The neighbourhood economy includes shops, offices and also home-based business. As such, these mostly involve small to

  11. Perceptions of Personal Well-Being among Youth Accessing Residential or Intensive Home-Based Treatment

    Science.gov (United States)

    Preyde, Michele; Watkins, Hanna; Ashbourne, Graham; Lazure, Kelly; Carter, Jeff; Penney, Randy; White, Sara; Frensch, Karen; Cameron, Gary

    2013-01-01

    The outcomes of youth accessing residential treatment or intensive home-based treatment are varied. Understanding youth's perceptions of their well-being may inform service. The purpose of this report was to explore perceptions of youth's mental health, life satisfaction, and outlook for the future. Youth reported ongoing struggles with mental…

  12. Business Solutions Case Study: Marketing Zero Energy Homes: Tommy Williams Homes, Gainesville, Florida

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-06-01

    Building America research has shown that high-performance homes can potentially give builders an edge in the marketplace and can boost sales, but it doesn't happen automatically. It requires a tailored, easy-to-understand marketing campaign, and sometimes a little flair. This case study highlights the successful marketing approach of Tommy Williams Homes, which devotes resources to advertising, targeted social media outlets and blogs, realtor education seminars, and groundbreaking and open house celebrations. As a result, in one community, 2013 property sales records show that TWH outsells the only other builder in the development at a higher price, with fewer days on the market.

  13. Brookfield Homes Passive House Performance Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Herk, A. [IBACOS, Inc., Pittsburgh, PA (United States); Poerschke, A. [IBACOS, Inc., Pittsburgh, PA (United States); Beach, R. [IBACOS, Inc., Pittsburgh, PA (United States)

    2016-02-04

    In 2012-2013, IBACOS worked with a builder, Brookfield Homes in Denver, Colorado, to design and construct a Passive House certified model home. IBACOS used several modeling programs and calculation methods to complete the final design package along with Brookfield's architect KGA Studio. This design package included upgrades to the thermal enclosure, basement insulation, windows, and heating, ventilation, and air conditioning. Short-term performance testing in the Passive House was done during construction and after construction. Testing with a blower door indicated that whole-building air leakage to the outside was 324 CFM and 0.60 ACH50. The other two test homes had little short-term testing done post-construction by the local energy rater. IBACOS then monitored the energy consumption and whole-house comfort conditions of that occupied Passive House after one year of operation and compared the monitoring results to those for two other occupied test houses in the same area with similar square footage but slightly different floor plans. IBACOS also assisted the builder, Brookfield Homes, in researching design scenarios for Zero Energy Ready Home and ENERGY STAR acceptance levels. IBACOS also assisted Brookfield in conceptualizing product for Denver's Brighton Heights area. Brookfield was considering building to Zero Energy Ready Home standards in that location. IBACOS provided strategies that Brookfield may draw from in the event the builder chooses to pursue a Zero Energy Ready Home plan for that market.

  14. TaC Studios New Construction Test House

    Energy Technology Data Exchange (ETDEWEB)

    Butler, T.; Curtis, O.; Kim, E.; Roberts, S.; Stephenson, R.

    2013-03-01

    As part of the NAHB Research Center Industry Partnership, Southface partnered with TaC Studios, an Atlanta based architecture firm specializing in residential and light commercial design, on the construction of a new test home in Atlanta, GA in the mixed humid climate zone. This home will serve as a model home for the builder partner and addresses Building America energy savings targets through the planning and implementation of a design package will serve as a basis of design for the builder partner's future homes. As a BA test house, this home will be evaluated to detail whole house energy use, end use loads, and HVAC and hot water efficiency.

  15. CMS DAQ Event Builder Based on Gigabit Ethernet

    CERN Document Server

    Bauer, G; Branson, J; Brett, A; Cano, E; Carboni, A; Ciganek, M; Cittolin, S; Erhan, S; Gigi, D; Glege, F; Gómez-Reino, Robert; Gulmini, M; Gutiérrez-Mlot, E; Gutleber, J; Jacobs, C; Kim, J C; Klute, M; Lipeles, E; Lopez-Perez, Juan Antonio; Maron, G; Meijers, F; Meschi, E; Moser, R; Murray, S; Oh, A; Orsini, L; Paus, C; Petrucci, A; Pieri, M; Pollet, L; Rácz, A; Sakulin, H; Sani, M; Schieferdecker, P; Schwick, C; Sumorok, K; Suzuki, I; Tsirigkas, D; Varela, J

    2007-01-01

    The CMS Data Acquisition System is designed to build and filter events originating from 476 detector data sources at a maximum trigger rate of 100 KHz. Different architectures and switch technologies have been evaluated to accomplish this purpose. Events will be built in two stages: the first stage will be a set of event builders called FED Builders. These will be based on Myrinet technology and will pre-assemble groups of about 8 data sources. The second stage will be a set of event builders called Readout Builders. These will perform the building of full events. A single Readout Builder will build events from 72 sources of 16 KB fragments at a rate of 12.5 KHz. In this paper we present the design of a Readout Builder based on TCP/IP over Gigabit Ethernet and the optimization that was required to achieve the design throughput. This optimization includes architecture of the Readout Builder, the setup of TCP/IP, and hardware selection.

  16. Keys to the House: Unlocking Residential Savings With Program Models for Home Energy Upgrades

    Energy Technology Data Exchange (ETDEWEB)

    Grevatt, Jim [Energy Futures Group (United States); Hoffman, Ian [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Hoffmeyer, Dale [US Department of Energy, Washington, DC (United States)

    2017-07-05

    After more than 40 years of effort, energy efficiency program administrators and associated contractors still find it challenging to penetrate the home retrofit market, especially at levels commensurate with state and federal goals for energy savings and emissions reductions. Residential retrofit programs further have not coalesced around a reliably successful model. They still vary in design, implementation and performance, and they remain among the more difficult and costly options for acquiring savings in the residential sector. If programs are to contribute fully to meeting resource and policy objectives, administrators need to understand what program elements are key to acquiring residential savings as cost effectively as possible. To that end, the U.S. Department of Energy (DOE) sponsored a comprehensive review and analysis of home energy upgrade programs with proven track records, focusing on those with robustly verified savings and constituting good examples for replication. The study team reviewed evaluations for the period 2010 to 2014 for 134 programs that are funded by customers of investor-owned utilities. All are programs that promote multi-measure retrofits or major system upgrades. We paid particular attention to useful design and implementation features, costs, and savings for nearly 30 programs with rigorous evaluations of performance. This meta-analysis describes program models and implementation strategies for (1) direct install retrofits; (2) heating, ventilating and air-conditioning (HVAC) replacement and early retirement; and (3) comprehensive, whole-home retrofits. We analyze costs and impacts of these program models, in terms of both energy savings and emissions avoided. These program models can be useful guides as states consider expanding their strategies for acquiring energy savings as a resource and for emissions reductions. We also discuss the challenges of using evaluations to create program models that can be confidently applied in

  17. Business Solutions Case Study: Marketing Zero Energy Homes: LifeStyle Homes, Melbourne, Florida

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-06-01

    Building America research has shown that high-performance homes can potentially give builders an edge in the marketplace and can boost sales. But it doesn't happen automatically. It requires a tailored, easy to understand marketing campaign and sometimes a little flair. This case study highlights LifeStyle Homes’ successful marketing approach for their SunSmart home package, which has helped to boost sales for the company. SunSmart marketing includes a modified logo, weekly blog, social media, traditional advertising, website, and sales staff training. Marketing focuses on quality, durability, healthy indoor air, and energy efficiency with an emphasis on the surety of third-party verification and the scientific approach to developing the SunSmart package. With the introduction of SunSmart, LifeStyle began an early recovery, nearly doubling sales in 2010; SunSmart sales now exceed 300 homes, including more than 20 zero energy homes. Completed homes in 2014 far outpaced the national (19%) and southern census region (27%) recovery rates for the same period. As technology improves and evolves, this builder will continue to collaborate with Building America.

  18. An Analysis of the Effects of Residential Photovoltaic Energy Systems on Home Sales Prices in California

    Energy Technology Data Exchange (ETDEWEB)

    Hoen, Ben; Cappers, Peter; Wiser, Ryan; Thayer, Mark

    2011-04-19

    An increasing number of homes in the U.S. have sold with photovoltaic (PV) energy systems installed at the time of sale, yet relatively little research exists that estimates the marginal impacts of those PV systems on home sale prices. A clearer understanding of these possible impacts might influence the decisions of homeowners considering the installation of a PV system, homebuyers considering the purchase of a home with PV already installed, and new home builders considering including PV as an optional or standard product on their homes. This research analyzes a large dataset of California homes that sold from 2000 through mid-2009 with PV installed. It finds strong evidence that homes with PV systems sold for a premium over comparable homes without PV systems during this time frame. Estimates for this premium expressed in dollars per watt of installed PV range, on average, from roughly $4 to $5.5/watt across a large number of hedonic and repeat sales model specifications and robustness tests. When expressed as a ratio of the sales price premium of PV to estimated annual energy cost savings associated with PV, an average ratio of 14:1 to 19:1 can be calculated; these results are consistent with those of the more-extensive existing literature on the impact of energy efficiency on sales prices. When the data are split among new and existing homes, however, PV system premiums are markedly affected. New homes with PV show premiums of $2.3-2.6/watt, while existing homes with PV show premiums of more than $6/watt. Reasons for this discrepancy are suggested, yet further research is warranted. A number of other areas where future research would be useful are also highlighted.

  19. Residential Mechanical Precooling

    Energy Technology Data Exchange (ETDEWEB)

    German, a. [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States); Hoeschele, M. [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States)

    2014-12-01

    This research conducted by the Alliance for Residential Building Innovation team evaluated mechanical air conditioner pre-cooling strategies in homes throughout the United States. EnergyPlus modeling evaluated two homes with different performance characteristics in seven climates. Results are applicable to new construction homes and most existing homes built in the last 10 years, as well as fairly efficient retrofitted homes.

  20. The impact of the residential built environment on work at home adoption frequency: An example from Northern California

    OpenAIRE

    Tang, Wei (Laura); Mokhtarian, Patricia L.; Handy, Susan L.

    2011-01-01

    Working at home is widely viewed as a useful travel-reduction strategy, and it is partly for that reason that considerable research related to telecommuting and home-based work has been conducted in the last two decades. This study examines the effect of residential neighborhood built environment (BE) factors on working at home. After systematically presenting and categorizing various relevant elements of the BE and reviewing related studies, we develop a multinomial logit (MNL) model of work...

  1. An EPICS IOC builder

    International Nuclear Information System (INIS)

    Abbott, M.G.; Cobb, T.

    2012-01-01

    An EPICS IOC (Input/Output Controller) is typically assembled from a number of standard components each with potentially quite complex hardware or software initialization procedures intermixed with a good deal of repetitive boiler-plate code. Assembling and maintaining a complex IOC can be a quite difficult and error prone process, particularly if the components are unfamiliar. The EPICS IOC builder is a Python library designed to automate the assembly of a complete IOC from a concise component level description. The dependencies and interactions between components as well as their detailed initialization procedures are automatically managed by the IOC builder through component description files maintained with the individual components. At Diamond Light Source we have a large library of components that can be assembled into EPICS IOCs. The IOC Builder is further finding increasing use in helping non-expert users to assemble an IOC without specialist knowledge. (authors)

  2. NetBeans GUI Builder

    OpenAIRE

    Pusiankova, Tatsiana

    2009-01-01

    This work aims at making readers familiar with the powerful tool NetBeans IDE GUI Builder and helping them make their first steps to creation of their own graphical user interface in the Java programming language. The work includes theoretical description of NetBeans IDE GUI Builder, its most important characteristics and peculiarities and also a set of practical instructions that will help readers in creation of their first GUI. The readers will be introduced to the environment of this tool ...

  3. Older adults’ home- and community-based care service use and residential transitions: a longitudinal study

    Directory of Open Access Journals (Sweden)

    Chen Ya-Mei

    2012-08-01

    Full Text Available Abstract Background As Home-and Community-Based Services (HCBS, such as skilled nursing services or personal care services, have become increasingly available, it has become clear that older adults transit through different residential statuses over time. Older adults may transit through different residential statuses as the various services meet their needs. The purpose of this exploratory study was to better understand the interplay between community-dwelling older adults’ use of home- and community-based services and their residential transitions. Methods The study compared HCBS service-use patterns and residential transitions of 3,085 older adults from the Second Longitudinal Study of Aging. Based on older adults’ residential status at the three follow-up interviews, four residential transitions were tracked: (1 Community-Community-Community (CCC: Resided in community during the entire study period; (2 Community-Institution-Community (CIC: Resided in community at T1, had lived in an institution at some time between T1 and T2, then had returned to community by T3; (3 Community-Community-Institution (CCI: Resided in community between at T1, and betweenT1 and T2, including at T2, but had used institutional services between T2 and T3; (4 Community-Institution-Institution (CII: Resided in community at T1 but in an institution at some time between T1 and T2, and at some time between T2 and T3.. Results Older adults’ use of nondiscretionary and discretionary services differed significantly among the four groups, and the patterns of HCBS use among these groups were also different. Older adults’ use of nondiscretionary services, such as skilled nursing care, may help them to return to communities from institutions. Personal care services (PCS and senior center services may be the key to either support elders to stay in communities longer or help elders to return to their communities from institutions. Different combinations of PCS with other

  4. How to enhance route learning and visuo-spatial working memory in aging: a training for residential care home residents.

    Science.gov (United States)

    Mitolo, Micaela; Borella, Erika; Meneghetti, Chiara; Carbone, Elena; Pazzaglia, Francesca

    2017-05-01

    This study aimed to assess the efficacy of a route-learning training in a group of older adults living in a residential care home. We verified the presence of training-specific effects in tasks similar to those trained - route-learning tasks - as well as transfer effects on related cognitive processes - visuo-spatial short-term memory (VSSTM; Corsi Blocks Test (CBT), forward version), visuo-spatial working memory (VSWM; CBT, backward version; Pathway Span Tasks; Jigsaw Puzzle Test) - and in self-report measures. The maintenance of training benefits was examined after 3 months. Thirty 70-90-year-old residential care home residents were randomly assigned to the route-learning training group or to an active control group (involved in non-visuo-spatial activities). The trained group performed better than the control group in the route-learning tasks, retaining this benefit 3 months later. Immediate transfer effects were also seen in visuo-spatial span tasks (i.e., CBT forward and backward version and Pathway Span Task); these benefits had been substantially maintained at the 3-month follow-up. These findings suggest that a training on route learning is a promising approach to sustain older adults' environmental learning and some related abilities (e.g., VSSTM and VSWM), even in residential care home residents.

  5. The CMS Event Builder

    CERN Document Server

    Brigljevic, V; Cano, E; Cittolin, Sergio; Csilling, Akos; Gigi, D; Glege, F; Gómez-Reino, Robert; Gulmini, M; Gutleber, J; Jacobs, C; Kozlovszky, Miklos; Larsen, H; Magrans de Abril, Ildefons; Meijers, F; Meschi, E; Murray, S; Oh, A; Orsini, L; Pollet, L; Rácz, A; Samyn, D; Scharff-Hansen, P; Schwick, C; Sphicas, Paris; ODell, V; Suzuki, I; Berti, L; Maron, G; Toniolo, N; Zangrando, L; Ninane, A; Erhan, S; Bhattacharya, S; Branson, J G

    2003-01-01

    The data acquisition system of the CMS experiment at the Large Hadron Collider will employ an event builder which will combine data from about 500 data sources into full events at an aggregate throughput of 100 GByte/s. Several architectures and switch technologies have been evaluated for the DAQ Technical Design Report by measurements with test benches and by simulation. This paper describes studies of an EVB test-bench based on 64 PCs acting as data sources and data consumers and employing both Gigabit Ethernet and Myrinet technologies as the interconnect. In the case of Ethernet, protocols based on Layer-2 frames and on TCP/IP are evaluated. Results from ongoing studies, including measurements on throughput and scaling are presented. The architecture of the baseline CMS event builder will be outlined. The event builder is organised into two stages with intelligent buffers in between. The first stage contains 64 switches performing a first level of data concentration by building super-fragments from fragmen...

  6. Building America Best Practices Series: Builders Challenge Guide to 40% Whole-House Energy Savings in the Marine Climate (Volume 11)

    Energy Technology Data Exchange (ETDEWEB)

    Pacific Northwest National Laboratory

    2010-09-01

    With the measures described in this guide, builders in the marine climate can build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers.

  7. Energy Value Housing Award Guide: How to Build and Profit with Energy Efficiency in New Home Construction

    Energy Technology Data Exchange (ETDEWEB)

    Sikora, J. L.

    2001-06-01

    As concern over the environment grows, builders have the potential to fulfill a market niche by building homes that use fewer resources and have lower environmental impact than conventional construction. Builders can increase their marketability and customer satisfaction and, at the same time, reduce the environmental impact of their homes. However, it takes dedication to build environmentally sound homes along with a solid marketing approach to ensure that customers recognize the added value of energy and resource efficiency. This guide is intended for builders seeking suggestions on how to improve energy and resource efficiency in their new homes. It is a compilation of ideas and concepts for designing, building, and marketing energy- and resource-efficient homes based on the experience of recipients of the national Energy Value Housing Award (EVHA).

  8. Retrofitting the Southeast: The Cool Energy House

    Energy Technology Data Exchange (ETDEWEB)

    Zoeller, W.; Shapiro, C.; Vijayakumar, G.; Puttagunta, S.

    2013-02-01

    The Consortium for Advanced Residential Buildings has provided the technical engineering and building science support for a highly visible demonstration home in connection with the National Association of Home Builders' International Builders Show. The two previous projects, the Las Vegas net-zero ReVISION House and the 2011 VISION and ReVISION Houses in Orlando, met goals for energy efficiency, cost effectiveness, and information dissemination through multiple web-based venues. This project, which was unveiled at the 2012 International Builders Show in Orlando on February 9, is the deep energy retrofit Cool Energy House (CEH). The CEH began as a mid-1990s two-story traditional specification house of about 4,000 ft2 in the upscale Orlando suburb of Windermere.

  9. Pilot Residential Deep Energy Retrofits and the PNNL Lab Homes

    Energy Technology Data Exchange (ETDEWEB)

    Widder, Sarah H.; Chandra, Subrato; Parker, Graham B.; Sande, Susan; Blanchard, Jeremy; Stroer, Dennis; McIlvaine, Janet; Chasar, David; Beal, David; Sutherland, Karen

    2012-01-01

    manufactured homes procured with minimal energy-efficiency specifications typical of existing homes in the region, and sited on the PNNL campus. The Lab Homes serve as a flexible test facility (the first of its kind in the Pacific Northwest) to rapidly evaluate energy-efficient and grid-smart technologies that are applicable to residential construction.

  10. DOE Zero Energy Ready Home Case Study: StreetScape Development, LLC, Libertyville, Illinois

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-09-01

    These single-family, HERS 45 homes incorporate 2×6 wood framed walls with R-20 open cell spray insulation and OSB. The builder, StreetScape Development, won a 2013 Housing Innovation Award in the custom builder category.

  11. Organizational capacities for 'residential care homes for the elderly' to provide culturally appropriate end-of-life care for Chinese elders and their families.

    Science.gov (United States)

    Kong, Sui-Ting; Fang, Christine Meng-Sang; Lou, Vivian Weiqun

    2017-01-01

    Developing culturally appropriate end-of-life care for Chinese elderly and families is not an endemic challenge for Hong Kong, but that of the Western countries with a noticeable trend of rising Chinese population. The particular development of Hong Kong healthcare system, which is currently the major provider of end-of-life care, makes Hong Kong a fruitful case for understanding the confluence of the West and the East cultures in end-of-life care practices. This study therefore aims at building our best practice to enhance the capacity of residential care homes in providing culturally appropriate end-of-life care. We conducted two phases of research, a questionnaire survey and a qualitative study, which respectively aims at (1) understanding the EoL care service demand and provision in RCHEs, including death facts and perceived barriers and challenges in providing quality end-of-life care in care homes, and (2) identifying the necessary organizational capacities for the 'relational personhood' to be sustained in the process of ageing and dying in residential care homes. Findings shed light on how to empower residential care homes with necessary environmental, structural and cultural-resource-related capacity for providing quality end-of-life care for Chinese elders and their families. Copyright © 2016 Elsevier Inc. All rights reserved.

  12. Community-Wide Zero Energy Ready Home Standard

    Energy Technology Data Exchange (ETDEWEB)

    Herk, A. [IBACOS, Inc., Pittsburght, PA (United States); Beggs, T. [IBACOS, Inc., Pittsburght, PA (United States)

    2016-02-05

    This report outlines the steps a developer can use when looking to create and implement higher performance standards such as the U.S. Department of Energy (DOE) Zero Energy Ready Home (ZERH) standards in a community. The report also describes the specific examples of how this process was followed by a developer, Forest City, in the Stapleton community in Denver, Colorado. IBACOS described the steps used to begin to bring the DOE ZERH standard to the Forest City Stapleton community based on 15 years of community-scale development work done by IBACOS. As a result of this prior IBACOS work, the team gained an understanding of the various components that a master developer needs to consider and created strategies for incorporating those components in the initial phases of development to achieve higher performance buildings in the community. An automated scoring system can be used to perform an internal audit that provides a detailed and consistent evaluation of how several homes under construction or builders' floor plans compare with the requirements of the DOE Zero Energy Ready Home program. This audit can be performed multiple times at specific milestones during construction to allow the builder to make changes as needed throughout construction for the project to meet Zero Energy Ready Home standards. This scoring system also can be used to analyze a builder's current construction practices and design.

  13. 12 CFR 541.23 - Residential real estate.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Residential real estate. 541.23 Section 541.23... AFFECTING FEDERAL SAVINGS ASSOCIATIONS § 541.23 Residential real estate. The terms residential real estate... home used in part for business); (c) Other real estate used for primarily residential purposes other...

  14. Factors Influencing Implementation of a Physical Activity Intervention in Residential Children's Homes.

    Science.gov (United States)

    Lau, Erica Y; Saunders, Ruth P; Pate, Russell R

    2016-11-01

    The Environmental Intervention in Children's Homes (ENRICH) study was the first published physical activity intervention undertaken in residential children's homes (RCHs). The study revealed differences in implementation across the homes, which may be a key factor that affects program effectiveness. The purpose of this study was to examine the direct and indirect effects of organizational capacity, provider characteristics, and quality of prevention support system on level of implementation of the ENRICH intervention. This study analyzed the ENRICH process evaluation data collected from 24 RCHs. Bayesian Path analysis was used to examine the direct and indirect effects of organizational capacity, provider characteristics, and quality of prevention support system on level of implementation. Level of implementation across RCHs was variable, ranging from 38 to 97 % (M = 68.3, SD = 14.45). Results revealed that organizational capacity and provider characteristics had significant direct associations with level of implementation. Neither direct nor indirect associations between quality of prevention support system and level of implementation reached statistical significance. Conducting formative assessments on organizational capacity and provider characteristics and incorporating such information in implementation planning may increase the likelihood of achieving higher levels of implementation in future studies.

  15. Hybrid LSA-ANN Based Home Energy Management Scheduling Controller for Residential Demand Response Strategy

    Directory of Open Access Journals (Sweden)

    Maytham S. Ahmed

    2016-09-01

    Full Text Available Demand response (DR program can shift peak time load to off-peak time, thereby reducing greenhouse gas emissions and allowing energy conservation. In this study, the home energy management scheduling controller of the residential DR strategy is proposed using the hybrid lightning search algorithm (LSA-based artificial neural network (ANN to predict the optimal ON/OFF status for home appliances. Consequently, the scheduled operation of several appliances is improved in terms of cost savings. In the proposed approach, a set of the most common residential appliances are modeled, and their activation is controlled by the hybrid LSA-ANN based home energy management scheduling controller. Four appliances, namely, air conditioner, water heater, refrigerator, and washing machine (WM, are developed by Matlab/Simulink according to customer preferences and priority of appliances. The ANN controller has to be tuned properly using suitable learning rate value and number of nodes in the hidden layers to schedule the appliances optimally. Given that finding proper ANN tuning parameters is difficult, the LSA optimization is hybridized with ANN to improve the ANN performances by selecting the optimum values of neurons in each hidden layer and learning rate. Therefore, the ON/OFF estimation accuracy by ANN can be improved. Results of the hybrid LSA-ANN are compared with those of hybrid particle swarm optimization (PSO based ANN to validate the developed algorithm. Results show that the hybrid LSA-ANN outperforms the hybrid PSO based ANN. The proposed scheduling algorithm can significantly reduce the peak-hour energy consumption during the DR event by up to 9.7138% considering four appliances per 7-h period.

  16. Integrated working between residential care homes and primary care: a survey of care homes in England

    Directory of Open Access Journals (Sweden)

    Gage Heather

    2012-11-01

    Full Text Available Abstract Background Older people living in care homes in England have complex health needs due to a range of medical conditions, mental health needs and frailty. Despite an increasing policy expectation that professionals should operate in an integrated way across organisational boundaries, there is a lack of understanding between care homes and the National Health Service (NHS about how the two sectors should work together, meaning that residents can experience a poor "fit" between their needs, and services they can access. This paper describes a survey to establish the current extent of integrated working that exists between care homes and primary and community health and social services. Methods A self-completion, online questionnaire was designed by the research team. Items on the different dimensions of integration (funding, administrative, organisational, service delivery, clinical care were included. The survey was sent to a random sample of residential care homes with more than 25 beds (n = 621 in England in 2009. Responses were analysed using quantitative and qualitative methods. Results The survey achieved an overall response rate of 15.8%. Most care homes (78.7% worked with more than one general practice. Respondents indicated that a mean of 14.1 professionals/ services (other than GPs had visited the care homes in the last six months (SD 5.11, median 14; a mean of .39 (SD.163 professionals/services per bed. The most frequent services visiting were district nursing, chiropody and community psychiatric nurses. Many (60% managers considered that they worked with the NHS in an integrated way, including sharing documents, engaging in integrated care planning and joint learning and training. However, some care home managers cited working practices dictated by NHS methods of service delivery and priorities for care, rather than those of the care home or residents, a lack of willingness by NHS professionals to share information, and low

  17. Drag and drop display & builder

    Energy Technology Data Exchange (ETDEWEB)

    Bolshakov, Timofei B.; Petrov, Andrey D.; /Fermilab

    2007-12-01

    The Drag and Drop (DnD) Display & Builder is a component-oriented system that allows users to create visual representations of data received from data acquisition systems. It is an upgrade of a Synoptic Display mechanism used at Fermilab since 2002. Components can be graphically arranged and logically interconnected in the web-startable Project Builder. Projects can be either lightweight AJAX- and SVG-based web pages, or they can be started as Java applications. The new version was initiated as a response to discussions between the LHC Controls Group and Fermilab.

  18. Surveys & Programs

    Science.gov (United States)

    Employment and Payroll Survey of Business Owners Work from Home Our statistics highlight trends in household statistics from multiple surveys. Data Tools & Apps Main American FactFinder Census Business Builder My residential construction. Business Dynamics Statistics (BDS) Provides measures of openings and closings, job

  19. DOE Zero Energy Ready Home Case Study: TC Legend Homes, Seattle, Washington

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-09-01

    This house incorporates slab-on-grade, EPS roof, and radiant heating with an air-to-water heat pump that also preheats domestic hot water. Without counting in the solar panels, the home earns a home energy rating system (HERS) score of 37, with projected utility bills of about $740 a year. With the 6.4-kW photovoltaic power system installed on the roof, the home’s HERS scores drops to -1 and utility bills for the all-electric home drop to zero. This home was awarded a 2013 Housing Innovation Award in the affordable builder category.

  20. Architecture and development of the CDF hardware event builder

    International Nuclear Information System (INIS)

    Shaw, T.M.; Booth, A.W.; Bowden, M.

    1989-01-01

    A hardware Event Builder (EVB) has been developed for use at the Collider Detector experiment at Fermi National Accelerator (CDF). the Event builder presently consists of five FASTBUS modules and has the task of reading out the front end scanners, reformatting the data into YBOS bank structure, and transmitting the data to a Level 3 (L3) trigger system which is composed of multiple VME processing nodes. The Event Builder receives its instructions from a VAX based Buffer Manager (BFM) program via a Unibus Processor Interface (UPI). The Buffer Manager instructs the Event Builder to read out one of the four CDF front end buffers. The Event Builder then informs the Buffer Manager when the event has been formatted and then is instructed to push it up to the L3 trigger system. Once in the L3 system, a decision is made as to whether to write the event to tape

  1. Job-Demands, Job Control, Social Support, Self-Efficacy, and Burnout of Staff of Residential Children's Homes

    Science.gov (United States)

    Brouwers, André; Tomic, Welko

    2016-01-01

    The aim of the current study was to examine among educational staff members of residential children's homes to what extent task demands, job control, emotional and social support from colleagues and management as well as self-efficacy beliefs concerning coping with aggressive behaviour in youngsters are associated with emotional exhaustion,…

  2. Residential home heating: The potential for air source heat pump technologies as an alternative to solid and liquid fuels

    International Nuclear Information System (INIS)

    Kelly, J. Andrew; Fu, Miao; Clinch, J. Peter

    2016-01-01

    International commitments on greenhouse gases, renewables and air quality warrant consideration of alternative residential heating technologies. The residential sector in Ireland accounts for approximately 25% of primary energy demand with roughly half of primary home heating fuelled by oil and 11% by solid fuels. Displacing oil and solid fuel usage with air source heat pump (ASHP) technology could offer household cost savings, reductions in emissions, and reduced health impacts. An economic analysis estimates that 60% of homes using oil, have the potential to deliver savings in the region of €600 per annum when considering both running and annualised capital costs. Scenario analysis estimates that a grant of €2400 could increase the potential market uptake of oil users by up to 17% points, whilst a higher oil price, similar to 2013, could further increase uptake from heating oil users by 24% points. Under a combined oil-price and grant scenario, CO_2 emissions reduce by over 4 million tonnes per annum and residential PM_2_._5 and NO_X emissions from oil and peat reduce close to zero. Corresponding health and environmental benefits are estimated in the region of €100m per annum. Sensitivity analyses are presented assessing the impact of alternate discount rates and technology performance. This research confirms the potential for ASHP technology and identifies and informs policy design considerations with regard to oil price trends, access to capital, targeting of grants, and addressing transactions costs. - Highlights: • Air Source Heat Pumps can offer substantial savings over oil fired central heating. • Significant residential air and climate emission reductions are possible. • Associated health and environmental benefits are estimated up to €100m per annum. • Results can inform policy interventions in the residential market to support change.

  3. Mini-Split Heat Pump Evaluation and Zero Energy Ready Home Support

    Energy Technology Data Exchange (ETDEWEB)

    Herk, Anastasia [IBACOS, Inc., Pittsburgh, PA (United States)

    2017-01-01

    IBACOS worked with builder Imagine Homes to evaluate the performance of an occupied new construction test house following construction of the house in the hot, humid climate of San Antonio, Texas. The project measures the effectiveness of a space conditioning strategy using a multihead mini-split heat pump (MSHP) system in a reduced-load home to achieve acceptable comfort levels (temperature and humidity) and energy performance. IBACOS collected long-term data and analyzed the energy consumption and comfort conditions of the occupied house after one year of operation. Although measured results indicate that the test system provides comfort both inside and outside the ASHRAE Standard 55-2010 range, the occupants of the house claimed both adequate comfort and appreciation of the ease of use and flexibility of the installed MSHP system. IBACOS also assisted the builder to evaluate design and specification changes necessary to comply with Zero Energy Ready Home, but the builder chose to not move forward with it because of concerns about the 'solar ready' requirements of the program.

  4. Staphylococcus aureus carriage in older populations in community residential care homes: Prevalence and molecular characterization of MRSA isolates.

    Science.gov (United States)

    Galán-Sánchez, Fátima; Pérez-Eslava, Maria; Machuca, Jesús; Trujillo-Soto, Teresa; Arca-Suarez, Jorge; Rodríguez-Iglesias, Manuel

    2018-06-20

    The epidemiology of S. aureus depends on conditions in specific populations. Few studies of S. aureus colonization in the older population have been performed in Spain. The aim of this study was to determine the prevalence of methicillin-resistant S. aureus (MRSA) colonization and its molecular epidemiological characteristics in an institutionalized population in community residential care homes in Cadiz, Spain. A cross-sectional epidemiological study was conducted in three residential care homes for older people. Axilla and nostril samples were tested. Identification of S. aureus and antimicrobial susceptibility testing were by MALDI-TOF and MicroScan panels. MRSA strains were subjected to SCCmec typing, multilocus sequence typing (MLST) and pulsed-field gel electrophoresis (PFGE). The presence of Panton-Valentine leukocidin (PVL) genes was determined by PCR in all S. aureus strains. A total of 293 residents were included. Fifty-one residents (17.4%) were colonized with methicillin-sensitive S. aureus (MSSA) and 11 (3.8%) with MRSA. Resistance to at least two aminoglycosides was observed in 25.4% of MSSA and 90.9% and of MRSA isolates, and resistance to levofloxacin in 80.3% of MSSA and 100% of MRSA isolates. SCCmecIV was detected in all isolates and all except one (ST-125) were ST-8. None of the S. aureus isolates were positive for PVL. A low rate of S. aureus carriage was detected and the prevalence of MRSA was very low. ST8-MRSA-IVc was the dominant clone, and only one strain belonged to ST125-MRSA-IVc. We found MRSA transmission within the residential care homes and a very high rate of quinolone resistance in MSSA and MRSA. Copyright © 2018 Elsevier España, S.L.U. and Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

  5. Residential Mechanical Precooling

    Energy Technology Data Exchange (ETDEWEB)

    German, Alea [Davis Energy Group, Davis, CA (United States). Alliance for Residential Building Innovation (ARBI); Hoeschele, Marc [Davis Energy Group, Davis, CA (United States). Alliance for Residential Building Innovation (ARBI)

    2014-12-01

    Residential air conditioning (AC) represents a challenging load for many electric utilities with poor load factors. Mechanical precooling improves the load factor by shifting cooling operation from on-peak to off-peak hours. This provides benefits to utilities and the electricity grid, as well as to occupants who can take advantage of time-of-use (TOU) electricity rates. Performance benefits stem from reduced compressor cycling, and shifting condensing unit operation to earlier periods of the day when outdoor temperatures are more favorable to operational efficiency. Finding solutions that save energy and reduce demand on the electricity grid is an important national objective and supports key Building America goals. The Alliance for Residential Building Innovation team evaluated mechanical AC precooling strategies in homes throughout the United States. EnergyPlus modeling was used to evaluate two homes with different performance characteristics in seven climates. Results are applicable to new construction homes and most existing homes built in the last 10 years, as well as fairly efficient retrofitted homes. A successful off-peak AC strategy offers the potential for increased efficiency and improved occupant comfort, and promotes a more reliable and robust electricity grid. Demand response capabilities and further integration with photovoltaic TOU generation patterns provide additional opportunities to flatten loads and optimize grid impacts.

  6. Man-machine interface builders at the Advanced Photon Source

    International Nuclear Information System (INIS)

    Anderson, M.D.

    1991-01-01

    Argonne National Laboratory is constructing a 7-GeV Advanced Photon Source for use as a synchrotron radiation source in basic and applied research. The controls and computing environment for this accelerator complex includes graphical operator interfaces to the machine based on Motif, X11, and PHIGS/PEX. Construction and operation of the control system for this accelerator relies upon interactive interface builder and diagram/editor type tools, as well as a run-time environment for the constructed displays which communicate with the physical machine via network connections. This paper discusses our experience with several commercial CUI builders, the inadequacies found in these, motivation for the development of an application- specific builder, and design and implementation strategies employed in the development of our own Man-Machine Interface builder. 5 refs

  7. Taking the Challenge at Singer Village--A Cold Climate Zero Energy Ready Home

    Energy Technology Data Exchange (ETDEWEB)

    Puttagunta, S.; Gaakye, O.

    2014-10-01

    After progressively incorporating ENERGY STAR(R) for Homes Versions 1, 2, and 3 into its standard practices over the years, this builder, Brookside Development, was seeking to build an even more sustainable product that would further increase energy efficiency, while also addressing indoor air quality, water conservation, renewable-ready, and resiliency. These objectives align with the framework of the DOE Challenge Home program, which 'builds upon the comprehensive building science requirements of ENERGY STAR for Homes Version 3, along with proven Building America innovations and best practices. Other special attribute programs are incorporated to help builders reach unparalleled levels of performance with homes designed to last hundreds of years.' CARB partnered with Brookside Development on the design optimization and construction of the first home in a small development of seven planned new homes being built on the old Singer Estate in Derby, CT.

  8. Retrofitting the Southeast. The Cool Energy House

    Energy Technology Data Exchange (ETDEWEB)

    Zoeller, W. [Steven Winter Associates, Inc., Norwalk, CT (United States); Shapiro, C. [Steven Winter Associates, Inc., Norwalk, CT (United States); Vijayakumar, G. [Steven Winter Associates, Inc., Norwalk, CT (United States); Puttagunta, S. [Steven Winter Associates, Inc., Norwalk, CT (United States)

    2013-02-01

    The Consortium for Advanced Residential Buildings research team has provided the technical engineering and building science support for a highly visible demonstration home that was unveiled at the National Association of Home Builders' International Builders Show on Feb. 9, 2012, in Orlando, FL. The two previous projects, the Las Vegas net-zero ReVISION House and the 2011 VISION and ReVISION Houses in Orlando, met goals for energy efficiency, cost effectiveness, and information dissemination through multiple web-based venues. This report describes the deep energy retrofit of the Cool Energy House (CEH), which began as a mid-1990s two-story traditional specification house of about 4,000 ft2 in the upscale Orlando suburb of Windermere.

  9. Quality Assurance Strategy for Existing Homes: Final Quality Management Primer for High Performing Homes

    Energy Technology Data Exchange (ETDEWEB)

    Del Bianco, M.; Taggart, J.; Sikora, J.; Wood, A.

    2012-12-01

    This guide is designed to help Building America (BA) Teams understand quality management and its role in transitioning from conventional to high performance home building and remodeling. It explains what quality means, the value of quality management systems, the unique need for QMS when building high performing homes, and the first steps to a implementing a comprehensive QMS. This document provides a framework and context for BA teams when they encounter builders and remodelers.

  10. Quality Assurance Strategy for Existing Homes. Final Quality Management Primer for High Performing Homes

    Energy Technology Data Exchange (ETDEWEB)

    Del Bianco, M. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States); Taggart, J. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States); Sikora, J. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States); Wood, A. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States)

    2012-12-01

    This guide is designed to help Building America (BA) teams understand quality management and its role in transitioning from conventional to high performance home building and remodeling. It explains what quality means, the value of quality management systems, the unique need for QMS when building high performing homes, and the first steps to a implementing a comprehensive QMS. This document provides a framework and context for BA teams when they encounter builders and remodelers.

  11. DOE Zero Energy Ready Home Case Study: Amaris Custom Homes, St. Paul, Minnesota

    Energy Technology Data Exchange (ETDEWEB)

    None

    2015-06-01

    For this project, Amaris worked with U.S. Department of Energy (DOE) team, NorthernSTAR Building America Partnership, to develop the first Zero Energy Ready Home (ZERH) in Minnesota's cold climate using reasonable, cost-effective, and replicable construction materials and practices. The result is a passive solar, super-efficient 3542-ft2 walkout ranch-style home with all the creature comforts. Along with meeting ZERH standards, Amaris also achieved certifications for Leadership in Energy & Environmental Design for Homes v4, MN Green Path Emerald, and a Builders Association of the Twin Cities Reggie Award of Excellence. The home achieves a HERS score of 41 without photovoltaics; with PV, the home achieves a HERS score of 5.

  12. Case Study of Smart Meter and In-home Display for Residential Behavior Change in Shanghai, China

    OpenAIRE

    Xu, Peng; Shen, Jingchun; Zhang, Xingxing; Zhao, Xudong; Qian, Yingchu

    2015-01-01

    Smart meters and in-home displays (IHD) have been recently adopted to help give residential consumers more control over energy consumption, and to help meet environmental and security of supply objectives. The paper aims to identify the effectiveness of smart meters and real-time IHDs in reducing Shanghai household energy consumption through a pilot investigation. The research results demonstrate the improved awareness, understanding, and attitudes towards the energy saving by smart meters an...

  13. Using Sustainable Development as a Competitive Strategy

    Science.gov (United States)

    Spearman, Pat

    Sustainable development reduces construction waste by 43%, generating 50% cost savings. Residential construction executives lacking adequate knowledge regarding the benefits of sustainable development practices are at a competitive disadvantage. Drawing from the diffusion of innovation theory, the purpose of this qualitative case study was to explore knowledge acquisition within the bounds of sustainable residential construction. The purposive sample size of 11 executive decision makers fulfilled the sample size requirements and enabled the extraction of meaningful data. Participants were members of the National Home Builders Association and had experience of a minimum of 5 years in residential construction. The research question addressed how to improve knowledge acquisition relating to the cost benefits of building green homes and increase the adoption rate of sustainable development among residential builders. Data were collected via semistructured telephone interviews, field observation, and document analysis. Transcribed data were validated via respondent validation, coded into 5 initial categories aligned to the focus of the research, then reduced to 3 interlocking themes of environment, competitive advantage, and marketing. Recommendations include developing comprehensive public policies, horizontal and vertical communications networks, and green banks to capitalize sustainable development programs to improve the diffusion of green innovation as a competitive advantage strategy. Business leaders could benefit from this data by integrating sustainable development practices into their business processes. Sustainable development reduces operational costs, increases competitive advantage for builders, and reduces greenhouse gas emissions. Implications for social change increase energy independence through conservation and developing a legislative policy template for comprehensive energy strategies. A comprehensive energy strategy promotes economic development

  14. DOE Zero Energy Ready Home Case Study, Weiss Building & Development, LLC., System Home, River Forest, Illinois

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-09-01

    The Passive House Challenge Home located in River Forest, Illinois, is a 5-bedroom, 4.5-bath, 3,600 ft2 two-story home (plus basement) that costs about $237 less per month to operate than a similar sized home built to the 2009 IECC. For a home with no solar photovoltaic panels installed, it scored an amazingly low 27 on the Home Energy Rating System (HERS) score.An ENERGY STAR-rated dishwasher, clothes washer, and refrigerator; an induction cooktop, condensing clothes dryer, and LED lighting are among the energy-saving devices inside the home. All plumbing fixtures comply with EPA WaterSense criteria. The home was awarded a 2013 Housing Innovation Award in the "systems builder" category.

  15. The quasi-market for adult residential care in the UK: Do for-profit, not-for-profit or public sector residential care and nursing homes provide better quality care?

    Science.gov (United States)

    Barron, David N; West, Elizabeth

    2017-04-01

    There has been a radical transformation in the provision of adult residential and nursing home care in England over the past four decades. Up to the 1980s, over 80% of adult residential care was provided by the public sector, but today public sector facilities account for only 8% of the available places, with the rest being provided by a mixture of for-profit firms (74%) and non-profit charities (18%). The public sector's role is often now that of purchaser (paying the fees of people unable to afford them) and regulator. While the idea that private companies may play a bigger role in the future provision of health care is highly contentious in the UK, the transformation of the residential and nursing home care has attracted little comment. Concerns about the quality of care do emerge from time to time, often stimulated by high profile media investigations, scandals or criminal prosecutions, but there is little or no evidence about whether or not the transformation of the sector from largely public to private provision has had a beneficial effect on those who need the service. This study asks whether there are differences in the quality of care provided by public, non-profit or for-profit facilities in England. We use data on care quality for over 15,000 homes that are provided by the industry regulator in England: the Care Quality Commission (CQC). These data are the results of inspections carried out between April 2011 and October 2015. Controlling for a range of facility characteristics such as age and size, proportional odds logistic regression showed that for-profit facilities have lower CQC quality ratings than public and non-profit providers over a range of measures, including safety, effectiveness, respect, meeting needs and leadership. We discuss the implications of these results for the ongoing debates about the role of for-profit providers of health and social care. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. On the Path to Zero Energy Homes

    Energy Technology Data Exchange (ETDEWEB)

    Merrigan, T.

    2001-03-30

    Just imagine living in Florida and your fantasies might turn to swaying palms, fresh orange juice and lots of air-conditioning. For most people, a summer spent in Florida's heat and humidity would be unbearable without it. So air-conditioning is a necessity. But it's also a big energy drain, accounting for about 35% of all electricity used in a typical Florida house. As the largest single source of energy consumption in Florida, a home's air-conditioning load represents the biggest energy challenge. The Florida Solar Energy Center (FSEC) designed a project to answer this challenge. Two homes were built with the same floor plan on near-by lots. The difference was that one (the ''control home'') conformed to local residential building practices, and the other (the ''Zero Energy home'') was designed with energy efficiency in mind and solar technology systems on the roof. The homes were then monitored carefully for energy use. The project's designers were looking to answer two important questions: Could a home in a climate such as central Florida's be engineered and built so efficiently that a relatively small PV system would serve the majority of its cooling needs--and even some of its daytime electrical needs? And, would that home be as comfortable and appealing as the conventional model built alongside it? The answer to both questions turned out to be a resounding yes. And the test was especially rigorous, because it was conducted in the summer of 1998--one of the hottest summers on record in Florida. This news is important for city planners, architects, builders, and homeowners not only in the Sunshine State, but elsewhere, too. The solar/energy efficiency combo worked so well in Florida that it can--and should--be tried in other parts of the country. This brochure describes the Zero Energy Homes concept using a case study.

  17. Diet Segregation between Cohabiting Builder and Inquiline Termite Species.

    Directory of Open Access Journals (Sweden)

    Daniela Faria Florencio

    Full Text Available How do termite inquilines manage to cohabit termitaria along with the termite builder species? With this in mind, we analysed one of the several strategies that inquilines could use to circumvent conflicts with their hosts, namely, the use of distinct diets. We inspected overlapping patterns for the diets of several cohabiting Neotropical termite species, as inferred from carbon and nitrogen isotopic signatures for termite individuals. Cohabitant communities from distinct termitaria presented overlapping diet spaces, indicating that they exploited similar diets at the regional scale. When such communities were split into their components, full diet segregation could be observed between builders and inquilines, at regional (environment-wide and local (termitarium scales. Additionally, diet segregation among inquilines themselves was also observed in the vast majority of inspected termitaria. Inquiline species distribution among termitaria was not random. Environmental-wide diet similarity, coupled with local diet segregation and deterministic inquiline distribution, could denounce interactions for feeding resources. However, inquilines and builders not sharing the same termitarium, and thus not subject to potential conflicts, still exhibited distinct diets. Moreover, the areas of the builder's diet space and that of its inquilines did not correlate negatively. Accordingly, the diet areas of builders which hosted inquilines were in average as large as the areas of builders hosting no inquilines. Such results indicate the possibility that dietary partitioning by these cohabiting termites was not majorly driven by current interactive constraints. Rather, it seems to be a result of traits previously fixed in the evolutionary past of cohabitants.

  18. Analyzing Residential End-Use Energy Consumption Data to Inform Residential Consumer Decisions and Enable Energy Efficiency Improvements

    Science.gov (United States)

    Carlson, Derrick R.

    While renewable energy is in the process of maturing, energy efficiency improvements may provide an opportunity to reduce energy consumption and consequent greenhouse gas emissions to bridge the gap between current emissions and the reductions necessary to prevent serious effects of climate change and will continue to be an integral part of greenhouse gas emissions policy moving forward. Residential energy is a largely untapped source of energy reductions as consumers, who wish to reduce energy consumption for monetary, environmental, and other reasons, face barriers. One such barrier is a lack of knowledge or understanding of how energy is consumed in a home and how to reduce this consumption effectively through behavioral and technological changes. One way to improve understanding of residential energy consumption is through the creation of a model to predict which appliances and electronics will be present and significantly contribute to the electricity consumption of a home on the basis of various characteristics of that home. The basis of this model is publically available survey data from the Residential Energy Consumption Survey (RECS). By predicting how households are likely to consume energy, homeowners, policy makers, and other stakeholders have access to valuable data that enables reductions in energy consumption in the residential sector. This model can be used to select homes that may be ripe for energy reductions and to predict the appliances that are the basis of these potential reductions. This work suggests that most homes in the U.S. have about eight appliances that are responsible for about 80% of the electricity consumption in that home. Characteristics such as census region, floor space, income, and total electricity consumption affect which appliances are likely to be in a home, however the number of appliances is generally around 8. Generally it takes around 4 appliances to reach the 50% threshold and 12 appliances to reach 90% of electricity

  19. Residential mercury contamination in adobe brick homes in Huancavelica, Peru.

    Directory of Open Access Journals (Sweden)

    Nicole Hagan

    Full Text Available This is the first study of adobe brick contamination anywhere in the world. Huancavelica, Peru is the site of historic cinnabar refining and one of the most mercury (Hg contaminated urban areas in the world. Over 80% of homes in Huancavelica are constructed with adobe bricks made from Hg contaminated soil. In this study we measured total Hg concentrations in adobe brick, dirt floor, surface dust, and air samples from the interior of 60 adobe brick houses located in four neighborhoods. Concentrations of total Hg in adobe bricks, dirt floors, and surface dust ranged from 8.00 to 1070 µg/g, 3.06 to 926 µg/g, and 0.02 to 9.69 µg/wipe, respectively, with statistically significant differences between the four neighborhoods. Concentrations of Hg in adobe brick and dirt floor samples in Huancavelica were orders of magnitude higher than in Ayacucho, a non-mining town in Peru. A strong correlation exists between total Hg concentrations in adobe bricks and dirt floors which confirms that adobe bricks were being made on-site and not purchased from an off-site source. A strong correlation between surface dust and adobe bricks and dirt floors indicates that walls and floors serve as indoor sources of Hg contamination. Elemental Hg vapor concentrations were below detection (<0.5 µg/m(3 in most homes; however in homes with detectable levels, concentrations up to 5.1 µg/m(3 were observed. No statistically significant differences in Hg vapor measurements were observed between neighborhoods. This study demonstrates that building materials used widely in developing communities, such as adobe bricks, may be a substantial source of residential Hg exposure in silver or gold refining communities where Hg is produced or used for amalgamation in artisanal gold production.

  20. In-reach specialist nursing teams for residential care homes: uptake of services, impact on care provision and cost-effectiveness

    Directory of Open Access Journals (Sweden)

    Nelson Sara

    2008-12-01

    Full Text Available Abstract Background A joint NHS-Local Authority initiative in England designed to provide a dedicated nursing and physiotherapy in-reach team (IRT to four residential care homes has been evaluated. The IRT supported 131 residents and maintained 15 'virtual' beds for specialist nursing in these care homes. Methods Data captured prospectively (July 2005 to June 2007 included: numbers of referrals; reason for referral; outcome (e.g. admission to IRT bed, short-term IRT support; length of stay in IRT; prevented hospital admissions; early hospital discharges; avoided nursing home transfers; and detection of unrecognised illnesses. An economic analysis was undertaken. Results 733 referrals were made during the 2 years (range 0.5 to 13.0 per resident per annum resulting in a total of 6,528 visits. Two thirds of referrals aimed at maintaining the resident's independence in the care home. According to expert panel assessment, 197 hospital admissions were averted over the period; 20 early discharges facilitated; and 28 resident transfers to a nursing home prevented. Detection of previously unrecognised illnesses accounted for a high number of visits. Investment in IRT equalled £44.38 per resident per week. Savings through reduced hospital admissions, early discharges, delayed transfers to nursing homes, and identification of previously unrecognised illnesses are conservatively estimated to produce a final reduction in care cost of £6.33 per resident per week. A sensitivity analysis indicates this figure might range from a weekly overall saving of £36.90 per resident to a 'worst case' estimate of £2.70 extra expenditure per resident per week. Evaluation early in implementation may underestimate some cost-saving activities and greater savings may emerge over a longer time period. Similarly, IRT costs may reduce over time due to the potential for refinement of team without major loss in effectiveness. Conclusion Introduction of a specialist nursing in

  1. Residential Waste

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund; Fruergaard, Thilde; Matsufuji, Y.

    2011-01-01

    are discussed in this chapter. Characterizing residential waste is faced with the problem that many residences already divert some waste away from the official collection systems, for example performing home composting of vegetable waste and garden waste, having their bundled newspaper picked up by the scouts...... twice a year or bringing their used furniture to the flea markets organized by charity clubs. Thus, much of the data available on residential waste represents collected waste and not necessarily all generated waste. The latter can only be characterized by careful studies directly at the source......, but such studies are very expensive if fair representation of both spatial and temporal variations should be obtained. In addition, onsite studies may affect the waste generation in the residence because of the increased focus on the issue. Residential waste is defined in different ways in different countries...

  2. Production-Built Homes: The Cost Advantages of Smart Growth

    Science.gov (United States)

    This study identifies the components and techniques of home building in traditional versus conventional developments, and attempts to help production builders better understand the cost differences between the two types of developments.

  3. New Whole-House Solutions Case Study: Quadrant Homes

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-02-01

    Quadrant moved ducts and high efficiency furnace inside conditioned space on nearly all 300 customizable house plans. The builder uses dry, true factory-assembled walls, extensive air sealing, and just in time delivery for pre-sold homes.

  4. FragBuilder

    DEFF Research Database (Denmark)

    Christensen, Anders Steen; Hamelryck, Thomas Wim; Jensen, Jan Halborg

    2014-01-01

    We present a powerful Python library to quickly and efficiently generate realistic peptide model structures. The library makes it possible to quickly set up quantum mechanical calculations on model peptide structures. It is possible to manually specify a specific conformation of the peptide...... to output the resulting structures directly to files in a variety of useful formats, such as XYZ or PDB formats, or directly as input files for a quantum chemistry program. FragBuilder is freely available at https://github.com/jensengroup/fragbuilder/ under the terms of the BSD open source license....

  5. Market Research of the Russian National and Regional Aspects of Builders Liability Insurance

    Directory of Open Access Journals (Sweden)

    Aleksander Andreevich Tsyganov

    2016-06-01

    Full Text Available The article studies the ways and level of the protection of the rights of shared construction participants in Russia, and the utilization of builders liability insurance for the purpose to identify the problem regions and the prospects of the development of mechanisms ensuring the liability of developers. The basis for the article was the study of real estate developers in 15 cities with the population over 1 million people. The article presents the data of the types of fund raising for building housing in the cities with the population over 1 million people, the regional differentiation in this parameter is highlighted. The article has explored the implementation of mechanisms ensuring the liability of developers for transfering premises to the shareholders. The main factors considered in the article are the form of registration of the relationship between a developer and an individual — an investor, as well as the mechanisms ensuring the liability of developers. It is shown that in some regions, the level of protection of the participants of shared construction is low. The mechanisms ensuring the liability of developers including the legal requirements for liability insurance and guarantee of credit institution are systematized. In the article, the key term of the liability insurance of builders for default on obligations or improperly performing the obligations on the delivery of residential properties, and also the condition of the guarantee of credit institution on the delivery of residential properties are considered. The regional features of how people participate in the construction of housing are described in the context of mechanisms ensuring the liability of developers. The use of various ensuring mechanisms, the differences in insurance by the commercial organizations and by joining the mutual society are shown. The results of the study can be used at the correction of the state and regional policy in the field of housing

  6. Home area networks

    NARCIS (Netherlands)

    Koonen, A.M.J.

    2013-01-01

    This article consists of a collection of slides from the author's conference presentation. Some of the specific areas/topics discussed include: Convergence in home networks, home service scenarios; Home wired network architectures, CapEx and OpEx; Residential Gateway; Optical fiber types;

  7. Endothelial function in male body builders taking anabolic androgenic steroids

    Directory of Open Access Journals (Sweden)

    H Hashemi

    2005-11-01

    Full Text Available Background: Adverse cardiovascular events have been reported in body builders taking anabolic steroids. Adverse effects of AAS on endothelial function can initiate atherosclerosis. This study evaluates endothelial function in body builders using AAS, compared with non-steroids using athletes as controls. Methods: We recruited 30 nonsmoking male body builders taking AAS, 14 in build up phase, 8 in work out phase, and 8 in post steroid phase, and 30 nonsmoking male athletes who denied ever using steroids. Serum lipids and fasting plasma glucose were measured to exclude dyslipidemia and diabetes. Brachial artery diameter was measured by ultrasound at rest, after cuff inflation, and after sublingual glyceriltrinitrate (GTN to determine flow mediated dilation (FMD, nitro mediated dilation (NMD and ratio of FMD to NMD (index of endothelial function. Result: Use of AAS was associated with higher body mass index (BMI and low density lipoprotein–cholesterol (LDL-C. Mean ratio of flow mediated dilatation after cuff deflation to post GTN dilatation of brachial artery (index of endothelial function in body builders taking AAS was significantly lower than control group (0.96(0.05 versus 1(0.08; p=0.03. After adjusting BMI, age and weight, no significant difference was seen in index of endothelial function between two groups (p=0 .21. Conclusion: Our study indicates that taking AAS in body builders doesn’t have direct effect on endothelial function. Future study with bigger sample size and measurement of AAS metabolites is recommended. Key words: endothelium, lipids, anabolic steroids, body builders

  8. Strategy Guideline: High Performance Residential Lighting

    Energy Technology Data Exchange (ETDEWEB)

    Holton, J.

    2012-02-01

    The Strategy Guideline: High Performance Residential Lighting has been developed to provide a tool for the understanding and application of high performance lighting in the home. The high performance lighting strategies featured in this guide are drawn from recent advances in commercial lighting for application to typical spaces found in residential buildings. This guide offers strategies to greatly reduce lighting energy use through the application of high quality fluorescent and light emitting diode (LED) technologies. It is important to note that these strategies not only save energy in the home but also serve to satisfy the homeowner's expectations for high quality lighting.

  9. Residential damage in an area of underground coal mining

    International Nuclear Information System (INIS)

    Padgett, M.F.

    1988-01-01

    In order to estimate the potential for future subsidence-related residential damage, a statistical analysis of past residential damage in the Boulder-Weld, Colorado, coal field was performed. The objectives of this study were to assess the difference in damage severity and frequency between undermined and non-undermined areas, and to determine, where applicable, which mining factors significantly influence the severity and frequency of residential damage. The results of this study suggest that undermined homes have almost three times the risk of having some type of structural damage than do non-undermined homes. The study also indicated that both geologic factors, such as the ratio of sandstone/claystone in the overburden, and mining factors, such as the mining feature (room, pillar, entry, etc.), can significantly affect the severity of overlying residential damage. However, the results of this study are dependent on local conditions and should not be applied elsewhere unless the geologic, mining, and residential conditions are similar

  10. The Se.Ko.Ph. study: a European multicentre study on falls in elderly subjects living in residential homes

    Directory of Open Access Journals (Sweden)

    Aladar Bruno Ianes

    2017-05-01

    Full Text Available The aim was to investigate risk factors for falls in elderly people living in residential nursing homes. An observational, prospective, multicentre study was conducted between March 2010 and March 2011 investigating falls in elderly residents living in residential nursing homes (4 Italian¸ 4 French and 5 German nursing homes. A number of risk factors were assessed as well as details of the fall (dynamics, reasons, location and time of occurrence. Differences were observed between the countries related to different nursing practices. Fallers comprised 36.5% of all residents and approximately 40% were injured as a consequence. Six logistic regression models were created to assess which fallrelated variables had the most impact, and showed subjects with faecal incontinence had a lower risk of falling, while subjects afflicted with dementia and visual impairment showed an increased risk of falling. Higher Tinetti scores were found to be related to an increased fall risk. Falls in the elderly occur due to complex interactions between demographic, physical, behavioural and environmental risk factors. Differences between countries in fall rates were seen, probably due to different medical practices, use of aids and restraints, and characteristics of the populations (i.e. the Italian residents tended to be more cognitively impaired and more impaired in balance and gait compared to the French and German residents. There was evidence that subjects with a better clinical status fall more frequently, whereas non-fallers had a worse clinical status and therefore tended to be more bedridden.

  11. Brookfield Homes Passive House Performance Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Herk, A. [IBACOS, Inc., Pittsburgh, PA (United States); Poerschke, A. [IBACOS, Inc., Pittsburgh, PA (United States); Beach, R. [IBACOS, Inc., Pittsburgh, PA (United States)

    2016-02-01

    In 2012-2013, IBACOS worked with a builder, Brookfield Homes in Denver, Colorado, to design and construct a Passive House certified model home. IBACOS used several modeling programs and calculation methods to complete the final design package along with Brookfield's architect KGA Studio. This design package included upgrades to the thermal enclosure, basement insulation, windows, and heating, ventilation, and air conditioning. Short-term performance testing in the Passive House was done during construction and after construction.

  12. Parent-Child Relationships and Family Functioning of Children and Youth Discharged from Residential Mental Health Treatment or a Home-Based Alternative

    Science.gov (United States)

    Preyde, Michele; Cameron, Gary; Frensch, Karen; Adams, Gerald

    2011-01-01

    This report stems from a larger study on the outcomes of children and youth who accessed residential treatment or a home-based alternative. In this report an analysis of family descriptive information, the nature of family relationships, and indicators of family functioning for children and youth who have participated in children's mental health…

  13. Comfort in High-Performance Homes in a Hot-Humid Climate

    Energy Technology Data Exchange (ETDEWEB)

    Poerschke, A. [IBACOS, Inc., Pittsburgh, PA (United States); Beach, R. [IBACOS, Inc., Pittsburgh, PA (United States)

    2016-01-22

    "9IBACOS monitored 37 homes during the late summer and early fall of 2014 in a hot and humid climate to better understand indoor comfort conditions. These homes were constructed in the last several years by four home builders that offered a comfort and performance guarantee for the homes. The homes were located in one of four cities: Tampa, Florida; Orlando, Florida; Houston, Texas; and San Antonio, Texas. Temperature and humidity data were collected from the thermostat and each room of the house using small, battery-powered data loggers. To understand system runtime and its impact on comfort, supply air temperature also was measured on a 1-minute interval. Overall, the group of homes only exceeded a room-to-room temperature difference of 6 degrees F for 5% of the time. For 80% of the time, the rooms in each house were within 4 degrees F of each other. Additionally, the impact of system runtime on comfort is discussed. Finally, measurements made at the thermostat were used to better understand the occupant operation of each cooling system's thermostat setpoint. Builders were questioned on their perceived impact of offering a comfort and performance guarantee. Their feedback, which generally indicates a positive perception, has been summarized in the report.

  14. How PV system ownership can impact the market value of residential homes

    Energy Technology Data Exchange (ETDEWEB)

    Klise, Geoffrey Taylor [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Johnson, Jamie L. [Energy Sense Finance, LLC, Punta Gorda, FL (United States)

    2014-01-01

    There are multiple ways for a homeowner to obtain the electricity generating and savings benefits offered by a photovoltaic (PV) system. These include purchasing a PV system through various financing mechanisms, or by leasing the PV system from a third party with multiple options that may include purchase, lease renewal or PV system removal. The different ownership options available to homeowners presents a challenge to appraisal and real estate professionals during a home sale or refinance in terms of how to develop a value that is reflective of the PV systems operational characteristics, local market conditions, and lender and underwriter requirements. This paper presents these many PV system ownership options with a discussion of what considerations an appraiser must make when developing the contributory value of a PV system to a residential property.

  15. Flash Builder 4 and Flex 4 Bible

    CERN Document Server

    Gassner, David

    2010-01-01

    A complete and thorough reference for developers on the new Flex 4 platform. Create desktop applications that behave identically on Windows, Mac OS X, and Linux with Adobe's new Flash Builder 4 platform and this in-depth guide. The book's tutorials and explanations walk you step-by-step through Flash Builder's new, faster tools; the new framework for generating code; how to connect to popular application servers; upgrading from Flex 3; and much more.: Shows you how to create rich applications for the Web and desktop with the very latest version of Flex, with detailed coverage for both new and

  16. Do homes that are more energy efficient consume less energy?: A structural equation model of the English residential sector

    International Nuclear Information System (INIS)

    Kelly, Scott

    2011-01-01

    Energy consumption from the residential sector is a complex socio-technical problem that can be explained using a combination of physical, demographic and behavioural characteristics of a dwelling and its occupants. A structural equation model (SEM) is introduced to calculate the magnitude and significance of explanatory variables on residential energy consumption. The benefit of this approach is that it explains the complex relationships that exist between manifest variables and their overall effect though direct, indirect and total effects. Using the English House Condition Survey (EHCS) consisting of 2531 unique cases, the main drivers behind residential energy consumption are found to be the number of household occupants, floor area, household income, dwelling efficiency (SAP), household heating patterns and living room temperature. In the multivariate case, SAP explains very little of the variance of residential energy consumption. However, this procedure fails to account for simultaneity bias between energy consumption and SAP. Using SEM its shown that dwelling energy efficiency (SAP), has reciprocal causality with dwelling energy consumption and the magnitude of these two effects are calculable. When non-recursivity between SAP and energy consumption is allowed for, SAP is shown to have a negative effect on energy consumption but conversely, homes with a propensity to consume more energy also have higher SAP rates. -- Highlights: → A Structural Equation Model (SEM) is developed to explain residential energy demand. → Key variables that drive residential energy consumption are empirically identified. → Direct, indirect and total effects are determined. → It is found that occupancy and household income are strongly mediated by floor area. → A non-recursive relationship is found to exist between energy consumption and SAP.

  17. Product Life Cycle of the Manufactured Home Industry

    Directory of Open Access Journals (Sweden)

    Gavin Wherry

    2014-09-01

    Full Text Available Residential construction consumes an estimated 26 percent of the total U.S. wood harvest and thus plays an important role in the forest products value chain. While being a relatively small part of the U.S. residential construction market, the factory-built residential housing industry, originating from manufactured homes (e.g. mobile homes, is embracing emerging industry segments such as modular or panelized homes. Since indications exist that factory-built home production is slated to gain a more prominent role in the U.S. construction markets at the cost of traditional stick-built production, the factory-built home industry sub-segment is of considerable importance to the forest products industry. This research looks at manufactured home producers as a benchmark for analyzing the current economic state of the industry and discusses competitive strategies. The analysis concludes, through macroeconomic modeling, that manufactured homes are in the declining stage of their product life cycle due to changes to the U.S. residential construction sector and the factory-built home industry and by advancements of rival industry-segments. As market share continues to decline, firms operating in this industry-segment seek to either hedge their losses through product diversification strategies or remain focused on strategically repositioning the manufactured home segment.

  18. Performance Verification of Production-Scalable Energy-Efficient Solutions: Winchester/Camberley Homes Mixed-Humid Climate

    Energy Technology Data Exchange (ETDEWEB)

    Mallay, D. [Partnership for Home Innovation, Upper Marlboro, MD (United States); Wiehagen, J. [Partnership for Home Innovation, Upper Marlboro, MD (United States)

    2014-07-01

    Winchester/Camberley Homes collaborated with the Building America team Partnership for Home Innovation to develop a new set of high performance home designs that could be applicable on a production scale. The new home designs are to be constructed in the mixed humid climate zone and could eventually apply to all of the builder's home designs to meet or exceed future energy codes or performance-based programs. However, the builder recognized that the combination of new wall framing designs and materials, higher levels of insulation in the wall cavity, and more detailed air sealing to achieve lower infiltration rates changes the moisture characteristics of the wall system. In order to ensure long term durability and repeatable successful implementation with few call-backs, the project team demonstrated through measured data that the wall system functions as a dynamic system, responding to changing interior and outdoor environmental conditions within recognized limits of the materials that make up the wall system. A similar investigation was made with respect to the complete redesign of the HVAC systems to significantly improve efficiency while maintaining indoor comfort. Recognizing the need to demonstrate the benefits of these efficiency features, the builder offered a new house model to serve as a test case to develop framing designs, evaluate material selections and installation requirements, changes to work scopes and contractor learning curves, as well as to compare theoretical performance characteristics with measured results.

  19. DOE Zero Energy Ready Home Case Study: The Imery Group — Proud Green Home, Serenbe, GA

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-09-01

    The first certified Zero Energy Ready Home in Georgia was honored in the Custom Builder category of the 2014 Housing Innovation Awards. The 2,811-ft2, two-story custom home has 2x6 advanced framed walls filled with R-20 of open-cell spray foam, plus an R-6.6 insulated coated OSB sheathing. Also included is electronic monitoring equipment that tracks the PV, solar thermal water heater, ERV, mini-split heat pump with three indoor heads, solar water heater, and LED and CFL lighting.

  20. DOE Zero Energy Ready Home Case Study: AquaZephyr — Eco-Village-Ithaca, Ithaca, NY

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-09-01

    This two-story, 1,664 ft2 home is one of 17 single-family and four duplex homes built as part of an energy-efficient cooperative. Winner in the Production Builder category of the 2014 Housing Innovation Awards, the home achieves a HERS 56 without photovoltaics and HERS 15 with 4 kW of photovoltaics.

  1. Advanced Decentralized Water/Energy Network Design for Sustainable Infrastructure presentation at the 2012 National Association of Home Builders (NAHB) International Builders'Show

    Science.gov (United States)

    A university/industry panel will report on the progress and findings of a fivesteve-year project funded by the US Environmental Protection Agency. The project's end product will be a Web-based, 3D computer-simulated residential environment with a decision support system to assist...

  2. EFFECTS OF AUGMENTED REALITY PRESENTATIONS ON CONSUMER'S VISUAL PERCEPTION OF FLOOR PLANS

    OpenAIRE

    Lutheran, April L

    2012-01-01

    Home architects and designers use many types of presentation drawings to convey design ideas. Augmented reality is a relatively new technology that can be used to aid in design and marketing for residential builders. An augmented reality presentation provides a more complete idea of a design than other presentations such as 3D model renderings and hand drawn artist sketches. While designers are accustomed to visualizing 2D plans, this task is difficult for home buyers. This difficulty has bee...

  3. Denmark's net'zero energy home'

    DEFF Research Database (Denmark)

    Hansen, Ellen Kathrine

    2010-01-01

    Judging by looks alone, you'd never guess that the simple one-and-a-half-story house on a residential street outside Århus, Denmark, is anything more than an ordinary single-family home. The stylish little house has the broad windows and long sloping roof of a typical Scandinavian home; a trampol......Judging by looks alone, you'd never guess that the simple one-and-a-half-story house on a residential street outside Århus, Denmark, is anything more than an ordinary single-family home. The stylish little house has the broad windows and long sloping roof of a typical Scandinavian home...

  4. Residential Energy Performance Metrics

    Directory of Open Access Journals (Sweden)

    Christopher Wright

    2010-06-01

    Full Text Available Techniques for residential energy monitoring are an emerging field that is currently drawing significant attention. This paper is a description of the current efforts to monitor and compare the performance of three solar powered homes built at Missouri University of Science and Technology. The homes are outfitted with an array of sensors and a data logger system to measure and record electricity production, system energy use, internal home temperature and humidity, hot water production, and exterior ambient conditions the houses are experiencing. Data is being collected to measure the performance of the houses, compare to energy modeling programs, design and develop cost effective sensor systems for energy monitoring, and produce a cost effective home control system.

  5. Grassroots movement building and preemption in the campaign for residential fire sprinklers.

    Science.gov (United States)

    Pertschuk, Mark; Hobart, Robin; Paloma, Marjorie; Larkin, Michelle A; Balbach, Edith D

    2013-10-01

    Home fires account for 85% of fire deaths in the United States, the majority in 1- or 2-family homes lacking fire sprinklers. Since 1978, however, a grassroots movement has successfully promoted more than 360 local ordinances mandating sprinklers in all new residential construction, including 1- and 2-family homes. The homebuilding industry has responded by seeking state preemption of local authority, a strategy previously used by other industries concerned about protecting their profits. From 2009 through 2011, 13 states adopted laws eliminating or limiting local authority over residential fire sprinklers. This study of the residential sprinkler movement adds to our understanding of grassroots public health movements and provides additional evidence that preemption can have a negative impact on public health and safety.

  6. The Pacific Northwest residential consumer: Perceptions and preferences of home heating fuels, major appliances, and appliance fuels

    Energy Technology Data Exchange (ETDEWEB)

    Harkreader, S.A.; Hattrup, M.P.

    1988-09-01

    In 1983 the Bonneville Power Administration contracted with the Pacific Northwest Laboratory (PNL) to conduct an analysis of the marketing environment for Bonneville's conservation activities. Since this baseline residential study, PNL has conducted two follow up market research projects: Phase 2 in 1985, and Phase 3, in 1988. In this report the respondents' perceptions, preferences, and fuel switching possibilities of fuels for home heating and major appliances are examined. To aid in effective target marketing, the report identifies market segments according to consumers' demographics, life-cycle, attitudes, and opinions.

  7. Assisted Living Facilities - CARE_LONG_TERM_FACILITIES_ISDH_IN: Residential Care Facilities, Nursing Homes, and Hospices in Indiana in 2007 (Indiana State Department of Health, Point Shapefile)

    Data.gov (United States)

    NSGIC State | GIS Inventory — CARE_LONG_TERM_FACILITIES_ISDH_IN is a point shapefile showing the locations of 86 residential care facilities, 525 long-term care facilities (nursing homes), and 81...

  8. Approach to interior design for passive direct gain solar homes

    Energy Technology Data Exchange (ETDEWEB)

    Kachadorian, C.C.

    1980-01-01

    In response to requests from buyers and builders of direct gain passive solar homes interior design criteria either specific to, or emphasized by, passive solar buildings are investigated. Problems of high sunlight penetration, secondary illumination, material selection, sound control and psychology are approached. Material deterioration, fading, glare, noise, and a sense of spacial confinement can be minimized, contributing to the appeal and saleability of passive solar homes.

  9. FastStats: Home Health Care

    Science.gov (United States)

    ... this? Submit What's this? Submit Button NCHS Home Home Health Care Recommend on Facebook Tweet Share Compartir Data are ... National Study of Long-Term Care Providers Nursing Home Care Residential Care Communities Centers for Medicare and Medicaid ...

  10. High-Performance Ducts in Hot-Dry Climates

    Energy Technology Data Exchange (ETDEWEB)

    Hoeschele, Marc [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Chitwood, Rick [National Renewable Energy Laboratory (NREL), Golden, CO (United States); German, Alea [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Weitzel, Elizabeth [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2015-07-30

    Duct thermal losses and air leakage have long been recognized as prime culprits in the degradation of heating, ventilating, and air-conditioning (HVAC) system efficiency. Both the U.S. Department of Energy’s Zero Energy Ready Home program and California’s proposed 2016 Title 24 Residential Energy Efficiency Standards require that ducts be installed within conditioned space or that other measures be taken to provide similar improvements in delivery effectiveness (DE). Pacific Gas & Electric Company commissioned a study to evaluate ducts in conditioned space and high-performance attics (HPAs) in support of the proposed codes and standards enhancements included in California’s 2016 Title 24 Residential Energy Efficiency Standards. The goal was to work with a select group of builders to design and install high-performance duct (HPD) systems, such as ducts in conditioned space (DCS), in one or more of their homes and to obtain test data to verify the improvement in DE compared to standard practice. Davis Energy Group (DEG) helped select the builders and led a team that provided information about HPD strategies to them. DEG also observed the construction process, completed testing, and collected cost data.

  11. Guidelines for residential commissioning

    Energy Technology Data Exchange (ETDEWEB)

    Wray, Craig P.; Walker, Iain S.; Sherman, Max H.

    2003-01-31

    Currently, houses do not perform optimally or even as many codes and forecasts predict, largely because they are field assembled and there is no consistent process to identify problems or to correct them. Residential commissioning is a solution to this problem. This guide is the culmination of a 30-month project that began in September 1999. The ultimate objective of the project is to increase the number of houses that undergo commissioning, which will improve the quality, comfort, and safety of homes for California citizens. The project goal is to lay the groundwork for a residential commissioning industry in California focused on end-use energy and non-energy issues. As such, we intend this guide to be a beginning and not an end. Our intent is that the guide will lead to the programmatic integration of commissioning with other building industry processes, which in turn will provide more value to a single site visit for people such as home energy auditors and raters, home inspectors, and building performance contractors. Project work to support the development of this guide includes: a literature review and annotated bibliography, which facilitates access to 469 documents related to residential commissioning published over the past 20 years (Wray et al. 2000), an analysis of the potential benefits one can realistically expect from commissioning new and existing California houses (Matson et al. 2002), and an assessment of 107 diagnostic tools for evaluating residential commissioning metrics (Wray et al. 2002). In this guide, we describe the issues that non-experts should consider in developing a commissioning program to achieve the benefits we have identified. We do this by providing specific recommendations about: how to structure the commissioning process, which diagnostics to use, and how to use them to commission new and existing houses. Using examples, we also demonstrate the potential benefits of applying the recommended whole-house commissioning approach to

  12. Accessorizing Building Science – A Web Platform to Support Multiple Market Transformation Programs

    Energy Technology Data Exchange (ETDEWEB)

    Madison, Michael C.; Antonopoulos, Chrissi A.; Dowson, Scott T.; Franklin, Trisha L.; Carlsen, Leif C.; Baechler, Michael C.

    2014-09-28

    As demand for improved energy efficiency in homes increases, builders need information on the latest findings in building science, rapidly ramping-up energy codes, and technical requirements for labeling programs. The Building America Solution Center is a Department of Energy (DOE) website containing hundreds of expert guides designed to help residential builders install efficiency measures in new and existing homes. Builders can package measures with other media for customized content. Website content provides technical support to market transformation programs such as ENERGY STAR and has been cloned and adapted to provide content for the Better Buildings Residential Program. The Solution Center uses the Drupal open source content management platform to combine a variety of media in an interactive manner to make information easily accessible. Developers designed a unique taxonomy to organize and manage content. That taxonomy was translated into web-based modules that allow users to rapidly traverse structured content with related topics, and media. We will present information on the current design of the Solution Center and the underlying technology used to manage the content. The paper will explore development of features, such as “Field Kits” that allow users to bundle and save content for quick access, along with the ability to export PDF versions of content. Finally, we will discuss development of an Android based mobile application, and a visualization tool for interacting with Building Science Publications that allows the user to dynamically search the entire Building America Library.

  13. Older adults' views and experiences of doll therapy in residential care homes.

    Science.gov (United States)

    Alander, Heidi; Prescott, Tim; James, Ian A

    2015-09-01

    The mechanisms underlying the success of doll therapy are poorly understood. The aims of this study were to explore how people in care, doll users and non-users, make sense of doll use in their settings. A grounded theory approach was used, recruiting participants from three residential care homes involving four male and 12 female residents. Data collection occurred in two phases; five participants took part in a focus group and later 11 participants were interviewed individually. Eight of the 11 participants had dementia, and four participants were actively using dolls. The results are presented as themes, and sub-themes, consisting of four main categories (intrapersonal features, interpersonal features, behavioural benefits, ethical and moderating factors). This thematic analysis shows that residents generally support the use of dolls, believing that dolls can have a positive impact on some users. The mechanisms by which this impact is achieved are discussed together with the ethical concerns. © The Author(s) 2013.

  14. The positioning of sustainability within residential property marketing.

    Science.gov (United States)

    Kriese, Ulrich; Scholz, Roland W

    2011-01-01

    This article investigates the evolution of sustainability positioning in residential property marketing to shed light on the specific role and responsibility of housebuilders and housing investors in urban development. To this end, an analysis is made of housing advertisements published in Basel, Switzerland, over a period of more than 100 years. The paper demonstrates how to draw successfully on advertisements to discern sustainability patterns in housing, using criteria situated along the dimensions building, location and people. Cluster analysis allows five clusters of sustainability positioning to be described—namely, good location, green building, comfort living, pre-sustainability and sustainability. Investor and builder types are differently located in these clusters. Location emerges as an issue which, to a large extent, is advertised independently from other sustainability issues.

  15. [Subjective and objective indicators of job stress and burnout in a residential home for the elderly].

    Science.gov (United States)

    Fiabane, Elena; Dordoni, Paola; Argentero, Piergiorgio

    2016-01-01

    Elderly care workers have a higher risk than other professionals of developing burnout. Despite literature has highlighted the methodological advantage resulting from an integration of subjective and objective measures of stressors, only few studies have investigated job stress and burnout in the Italian elderly care context using this kind of assessment. The aims of this study were: (a) to investigate the level of stress and burnout and their organizational sources in a sample of eldercare workers by means of subjective and objective tools, and b) to compare the stress and burnout levels between health care staff and nursing aides employed in a residential home for the, elderly. The sample of the study included the totality of the elderly workers employed in a residential home for the elderly (N=49; response rate: 100%). The Maslach Burnout Inventory-GS and the Areas of Worklife Scale were used for the subjective assessment of burnout and organizational riskfactors. A check list of objective indicators was used for the objective assessment of job stress. Results from the self-report questionnaires showed high levels of exhaustion and a perception of high workload and unfairness for, the total sample. Objective parameters ofjob stress risk were biomechanical overload, dealing with suffering people and the risk of work-related violence. Nursing aides had greater risk of burnout and reported a greater number of objective sources of stress, compared to health care workers. This exploratory study supports the use of both subjective and objective method for the assessment of job stress risk as the most comprehensive approach for the implementation of preventive and corrective interventions.

  16. 76 FR 2145 - Masco Builder Cabinet Group Including On-Site Leased Workers From Reserves Network, Jackson, OH...

    Science.gov (United States)

    2011-01-12

    ...,287B; TA-W-71,287C] Masco Builder Cabinet Group Including On-Site Leased Workers From Reserves Network, Jackson, OH; Masco Builder Cabinet Group, Waverly, OH; Masco Builder Cabinet Group, Seal Township, OH; Masco Builder Cabinet Group, Seaman, OH; Amended Certification Regarding Eligibility To Apply for Worker...

  17. Integrating mental health care into residential homes for the elderly: an analysis of six Dutch programs for older people with severe and persistent mental illness

    NARCIS (Netherlands)

    Depla, Marja F. I. A.; Pols, Jeannette; de Lange, Jacomine; Smits, Carolien H. M.; de Graaf, Ron; Heeren, Thea J.

    2003-01-01

    Integrating mental health care into residential homes for the elderly is a potentially effective model to address the complex care needs of older chronically mentally ill people. Because no research was available on the implementation of such integrated care in practice, six programs already

  18. TrustBuilder2: A Reconfigurable Framework for Trust Negotiation

    Science.gov (United States)

    Lee, Adam J.; Winslett, Marianne; Perano, Kenneth J.

    To date, research in trust negotiation has focused mainly on the theoretical aspects of the trust negotiation process, and the development of proof of concept implementations. These theoretical works and proofs of concept have been quite successful from a research perspective, and thus researchers must now begin to address the systems constraints that act as barriers to the deployment of these systems. To this end, we present TrustBuilder2, a fully-configurable and extensible framework for prototyping and evaluating trust negotiation systems. TrustBuilder2 leverages a plug-in based architecture, extensible data type hierarchy, and flexible communication protocol to provide a framework within which numerous trust negotiation protocols and system configurations can be quantitatively analyzed. In this paper, we discuss the design and implementation of TrustBuilder2, study its performance, examine the costs associated with flexible authorization systems, and leverage this knowledge to identify potential topics for future research, as well as a novel method for attacking trust negotiation systems.

  19. Building America Residential System Research Results: Achieving 30% Whole House Energy Savings Level in Mixed-Humid Climates; January 2006 - December 2006

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, R. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hendron, R. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Eastment, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jalalzadeh-Azar, A. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2006-12-01

    This report summarizes research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Mixed-Humid Climate Region on a cost-neutral basis.

  20. Driving Demand for Home Energy Improvements: Motivating residential customers to invest in comprehensive upgrades that eliminate energy waste, avoid high utility bills, and spur the economy

    Energy Technology Data Exchange (ETDEWEB)

    Fuller, Merrian C.

    2010-09-20

    Policy makers and program designers in the U.S. and abroad are deeply concerned with the question of how to scale up energy efficiency to a level that is commensurate both to the scale of the energy and climate challenges we face, and to the potential for energy savings that has been touted for decades. When policy makers ask what energy efficiency can do, the answers usually revolve around the technical and economic potential of energy efficiency - they rarely hone in on the element of energy demand that matters most for changing energy usage in existing homes: the consumer. A growing literature is concerned with the behavioral underpinnings of energy consumption. We examine a narrower, related subject: How can millions of Americans be persuaded to divert valued time and resources into upgrading their homes to eliminate energy waste, avoid high utility bills, and spur the economy? With hundreds of millions of public dollars flowing into incentives, workforce training, and other initiatives to support comprehensive home energy improvements, it makes sense to review the history of these programs and begin gleaning best practices for encouraging comprehensive home energy improvements. Looking across 30 years of energy efficiency programs that targeted the residential market, many of the same issues that confronted past program administrators are relevant today: How do we cost-effectively motivate customers to take action? Who can we partner with to increase program participation? How do we get residential efficiency programs to scale? While there is no proven formula - and only limited success to date with reliably motivating large numbers of Americans to invest in comprehensive home energy improvements, especially if they are being asked to pay for a majority of the improvement costs - there is a rich and varied history of experiences that new programs can draw upon. Our primary audiences are policy makers and program designers - especially those that are relatively

  1. Performance of the CMS Event Builder

    CERN Document Server

    Andre, Jean-Marc Olivier; Branson, James; Brummer, Philipp Maximilian; Chaze, Olivier; Cittolin, Sergio; Contescu, Cristian; Craigs, Benjamin Gordon; Darlea, Georgiana Lavinia; Deldicque, Christian; Demiragli, Zeynep; Dobson, Marc; Doualot, Nicolas; Erhan, Samim; Fulcher, Jonathan Richard; Gigi, Dominique; Gladki, Maciej Szymon; Glege, Frank; Gomez Ceballos, Guillelmo; Hegeman, Jeroen Guido; Holzner, Andre Georg; Janulis, Mindaugas; Jimenez Estupinan, Raul; Masetti, Lorenzo; Meijers, Franciscus; Meschi, Emilio; Mommsen, Remigius; Morovic, Srecko; O'Dell, Vivian; Orsini, Luciano; Paus, Christoph Maria Ernst; Petrova, Petia; Pieri, Marco; Racz, Attila; Reis, Thomas; Sakulin, Hannes; Schwick, Christoph; Simelevicius, Dainius; Zejdl, Petr

    2017-01-01

    The data acquisition system (DAQ) of the CMS experiment at the CERN Large Hadron Collider (LHC) assembles events at a rate of 100 kHz. It transports event data at an aggregate throughput of ~100 GB/s to the high-level trigger (HLT) farm. The CMS DAQ system has been completely rebuilt during the first long shutdown of the LHC in 2013/14. The new DAQ architecture is based on state-of-the-art network technologies for the event building. For the data concentration, 10/40 Gb/s Ethernet technologies are used together with a reduced TCP/IP protocol implemented in FPGA for a reliable transport between custom electronics and commercial computing hardware. A 56 Gb/s Infiniband FDR CLOS network has been chosen for the event builder. We report on the performance of the event builder system and the steps taken to exploit the full potential of the network technologies.

  2. Residential solar-heating system

    Science.gov (United States)

    1978-01-01

    Complete residential solar-heating and hot-water system, when installed in highly-insulated energy-saver home, can supply large percentage of total energy demand for space heating and domestic hot water. System which uses water-heating energy storage can be scaled to meet requirements of building in which it is installed.

  3. Knowledge transfer to builders in post-disaster housing reconstruction in West-Sumatra of Indonesia

    Science.gov (United States)

    Hidayat, Benny; Afif, Zal

    2017-11-01

    Housing is the most affected sector by disasters as can be observed after the 2009 earthquake in West Sumatra province in Indonesia. As in Indonesian construction industry, the housing post-disaster reconstruction is influenced by knowledge and skills of builders or laborers, or locally known as `tukang'. After the earthquake there were trainings to transfer knowledge about earthquake-safe house structure for the builders in the post-disaster reconstruction. This study examined the effectiveness of the training in term of understanding of the builders and application of the new knowledge. Ten semi-structured interviews with the builders were conducted in this study. The results indicate that the builders with prior housing construction experience can absorb and understand the new knowledge about earthquake-safe house structure. Combination of lecturing and practice sessions also help the builders to understand the knowledge. However, findings of this research also suggest there is a problem in implementation of the new knowledge. Utilization of earthquake-safe house structure may leads to a rise in house cost. As a result, some house owners prefer to save money than to adopt the new knowledge.

  4. Therapeutic Residential Care for Children and Youth:

    DEFF Research Database (Denmark)

    Whittaker, James K.; Holmes, Lisa; del Valle, Jorge F.

    2016-01-01

    so in closer collaboration with their families and in closer proximity to their home communities; and, (3) with the hope of reducing the high costs often associated with group residential provision. In some jurisdictions, efforts to reduce residential care resources in the absence of sufficient...... alternatives to serve high-resource needing youth has had unintended and negative consequences. It is within this context that a working group international experts representing research, policy, service delivery and families (International Work Group for Therapeutic Residential Care) convened at the Centre...... for Child and Family Research, Loughborough University in the U.K. for a Summit meeting on therapeutic residential care for children and youth funded by the Sir Halley Stewart Trust (UK). The focus centered on what is known about therapeutic residential care and what key questions should inform a priority...

  5. DOE ZERH Case Study: Evolutionary Home Builders, The Adaptation Home, Geneva, IL

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2015-09-01

    Case study of a DOE 2015 Housing Innovation Award winning custom home in the cold climate that got a HERS 30 without PV, with 2x8 24” on center walls with blown fiberglass and 4” polysio rigid foam; basement with 2” XPS interior, 4” under slab, 4” exterior of foundation wall; vented attic with R-100 blown cellulose; wo air-to-air heat pumps SEER 14.1; HSPF 9.6; heat pump water heater.

  6. Measure Guideline: Ventilation Guidance for Residential High-Performance New Construction - Multifamily

    Energy Technology Data Exchange (ETDEWEB)

    Lstiburek, Joseph [Building Science Corporation, Westford, MA (United States)

    2017-01-01

    The measure guideline provides ventilation guidance for residential high performance multifamily construction that incorporates the requirements of the ASHRAE 62.2 ventilation and indoor air quality standard. The measure guideline focus is on the decision criteria for weighing cost and performance of various ventilation systems. The measure guideline is intended for contractors, builders, developers, designers and building code officials. The guide may also be helpful to building owners wishing to learn more about ventilation strategies available for their buildings. The measure guideline includes specific design and installation instructions for the most cost effective and performance effective solutions for ventilation in multifamily units that satisfies the requirements of ASHRAE 62.2-2016.

  7. Technology change and energy consumption: A comparison of residential subdivisions

    Science.gov (United States)

    Nieves, L. A.; Nieves, A. L.

    The energy savings in residential buildings likely to result from implementation of the building energy performance standards (BEPS) were assessed. The goals were to: compare energy use in new homes designed to meet or exceed BEPS levels of energy efficiency with that in similar but older homes designed to meet conventional building codes, and to survey the home owners regarding their energy conservation attitudes and behaviors and to ascertain the degree to which conservation attitudes and behaviors are related to residential energy use. The consumer demand theory which provides the framework for the empirical analysis is presented. The sample residences are described and the data collection method discussed. The definition and measurement of major variables are presented.

  8. Maximizing Information from Residential Measurements of Volatile Organic Compounds

    Energy Technology Data Exchange (ETDEWEB)

    Maddalena, Randy [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Li, Na [Berkeley Analytical Associates, Richmond, CA (United States); Hodgson, Alfred [Berkeley Analytical Associates, Richmond, CA (United States); Offermann, Francis [Indoor Environmental Engineering, San Francisco, CA (United States); Singer, Brett [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2013-02-01

    Continually changing materials used in home construction and finishing can introduce new chemicals or changes in the VOC profile in residential air and the trend towards tighter homes can lead to higher exposure concentrations for many indoor sources. However, the complex mixture of VOCs in residential air makes it difficult to discover emerging contaminants and/or trends in pollutant profiles. The purpose of this study is to prepare a comprehensive library of chemicals found in homes, along with a semi-quantitative approach to maximize the information gained from VOC measurements. We carefully reviewed data from 108 new California homes and identified 238 individual compounds. The majority of the identified VOCs originated indoors. Only 31% were found to have relevant health based exposure guidelines and less than 10% had a chronic reference exposure level (CREL). The finding highlights the importance of extending IAQ studies to include a wider range of VOCs

  9. Building America Residential System Research Results. Achieving 30% Whole House Energy Savings Level in Hot-Dry and Mixed-Dry Climates

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, R. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hendron, R. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Eastment, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jalalzadeh-Azar, A. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2006-01-01

    This report summarizes Building America research results for the 30% energy savings level and demonstrates that lead builders can successfully provide 30% homes in the Hot-Dry/Mixed-Dry Climate Region on a cost-neutral basis.

  10. Kotai Antibody Builder: automated high-resolution structural modeling of antibodies.

    Science.gov (United States)

    Yamashita, Kazuo; Ikeda, Kazuyoshi; Amada, Karlou; Liang, Shide; Tsuchiya, Yuko; Nakamura, Haruki; Shirai, Hiroki; Standley, Daron M

    2014-11-15

    Kotai Antibody Builder is a Web service for tertiary structural modeling of antibody variable regions. It consists of three main steps: hybrid template selection by sequence alignment and canonical rules, 3D rendering of alignments and CDR-H3 loop modeling. For the last step, in addition to rule-based heuristics used to build the initial model, a refinement option is available that uses fragment assembly followed by knowledge-based scoring. Using targets from the Second Antibody Modeling Assessment, we demonstrate that Kotai Antibody Builder generates models with an overall accuracy equal to that of the best-performing semi-automated predictors using expert knowledge. Kotai Antibody Builder is available at http://kotaiab.org standley@ifrec.osaka-u.ac.jp. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  11. DOE Zero Energy Ready Home Case Study: Durable Energy Builders - Houston, Texas

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-11-01

    This case study describes a DOE Zero Energy Ready Home in Houston, Texas, that scored HERS 39 without PV and HERS 29 with PV. This 5,947 ft2 custom home has 11.5-inch ICF walls. The attic is insulated along the roof line with 5 to 7 inches of open-cell spray foam. Most of the home's drinking water is supplied by a 11,500-gallon rainwater cistern. Hurricane strapping connects the roof to the walls. The triple-pane windows are impact resistant. The foundation is a raised slab.

  12. The ALEPH event builder

    International Nuclear Information System (INIS)

    Benetta, R.; Marchioro, A.; McPherson, G.; Rueden, W. von

    1986-01-01

    The data acquisition system for the ALEPH experiment at CERN is organised in a hierarchical fashion within FASTBUS. The detector consists of a number of sub-detectors whose data must be individually assembled and formatted in real time. This task of 'event building' will be performed by a FASTBUS module in which a powerful microprocessor running high level software is embedded. Such a module, called an Event Builder, has been constructed by the ALEPH Online Group at CERN. (Auth.)

  13. Risks from Radon: Reconciling Miner and Residential Epidemiology

    International Nuclear Information System (INIS)

    Chambers, Douglas B.; Harley, Naomi H.

    2008-01-01

    Everyone is exposed to radon, an inert radioactive gas that occurs naturally and is present everywhere in the atmosphere. The annual dose from radon and its (short-lived) decay products is typically about one-half of the dose received by members of the public from all natural sources of ionizing radiation. Data on exposures and consequent effects have recently been reviewed by the National Council on Radiation Protection and Measurements (NCRP) and the United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR). Studies of underground miners provides a well-established basis for estimating risks from occupational exposures to radon and for studying factors that may affect the dose response relationship such as the reduction of risk (coefficients) with increasing time since exposure. Miners' studies previously formed the basis for estimating risks to people exposed to radon at home, with downward extrapolation from exposures in mines to residential levels of radon. Presently, the risk estimates from residential studies are adequate to estimate radon risks in homes. Although there are major uncertainties in extrapolating the risks of exposure to radon from the miner studies to assessing risks in the home, there is remarkably good agreement between the average of risk factors derived from miner studies and those from pooled residential case-control studies. There are now over 20 analytical studies of residential radon and lung cancer. These studies typically assess the relative risk from exposure to radon based on estimates of residential exposure over a period of 25 to 30 years prior to diagnosis of lung cancer. Recent pooled analyses of residential case-control studies support a small but detectable lung cancer risk from residential exposure, and this risk increases with increasing concentrations. The excess relative risk of lung cancer from long-term residential exposure is about the same for both smokers and non-smokers; however, because the

  14. Design of simulation builder software to support the enterprise modeling and simulation task of the AMTEX program

    Energy Technology Data Exchange (ETDEWEB)

    Nolan, M.; Lamont, A.; Chang, L.

    1995-12-12

    This document describes the implementation of the Simulation Builder developed as part of the Enterprise Modeling and Simulation (EM&S) portion of the Demand Activated Manufacturing Architecture (DAMA) project. The Simulation Builder software allows users to develop simulation models using pre-defined modules from a library. The Simulation Builder provides the machinery to allow the modules to link together and communicate information during the simulation run. This report describes the basic capabilities and structure of the Simulation Builder to assist a user in reviewing and using the code. It also describes the basic steps to follow when developing modules to take advantage of the capabilities provided by the Simulation Builder. The Simulation Builder software is written in C++. The discussion in this report assumes a sound understanding of the C++ language. Although this report describes the steps to follow when using the Simulation Builder, it is not intended to be a tutorial for a user unfamiliar with C++.

  15. Sacramento State Solar Decathlon 2015: Research Performance Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Mikael [California State Univ., Sacramento, CA (United States). Dept. of Construction Management

    2017-03-14

    Our primary objective is to design and build a 600-1000sf home that produces more energy than it consumes and to showcase this home at the 2015 Solar Decathlon in Irvine, CA. Further objectives are to educate consumers and home builders, alike (including K-12 students – the industry’s future consumers), inspire a shift towards the adoption of net-zero energy solutions in residential building, and to be a leader in the transformation of the California residential marketplace to a net-zero standard. Our specific mission statement for this project is as follows: Solar NEST strives to discover the future of sustainable, energy-efficient housing and deliver these innovations to home buyers at an affordable price. To make substantial improvements to conventional building methods with regard to aesthetics, performance, and affordability. Through our efforts, we aspire to bridge the gap between ‘what is’ and ‘what is possible’ by providing unique, elegant simplicity.

  16. Do social networks affect the use of residential aged care among older Australians?

    Directory of Open Access Journals (Sweden)

    Glonek Gary FV

    2007-10-01

    Full Text Available Abstract Background Older people's social networks with family and friends can affect residential aged care use. It remains unclear if there are differences in the effects of specific (with children, other relatives, friends and confidants and total social networks upon use of low-level residential care and nursing homes. Methods Data were drawn from the Australian Longitudinal Study of Ageing. Six waves of data from 1477 people aged ≥ 70 collected over nine years of follow-up were used. Multinomial logistic regressions of the effects of specific and total social networks on residential care use were carried out. Propensity scores were used in the analyses to adjust for differences in participant's health, demographic and lifestyle characteristics with respect to social networks. Results Higher scores for confidant networks were protective against nursing home use (odds ratio [OR] upper versus lower tertile of confidant networks = 0.50; 95%CI 0.33–0.75. Similarly, a significant effect of upper versus lower total network tertile on nursing home use was observed (OR = 0.62; 95%CI 0.43–0.90. Evidence of an effect of children networks on nursing home use was equivocal. Nursing home use was not predicted by other relatives or friends social networks. Use of lower-level residential care was unrelated to social networks of any type. Social networks of any type did not have a significant effect upon low-level residential care use. Discussion Better confidant and total social networks predict nursing home use in a large cohort of older Australians. Policy needs to reflect the importance of these particular relationships in considering where older people want to live in the later years of life.

  17. Technology diffusion of energy-related products in residential markets

    Energy Technology Data Exchange (ETDEWEB)

    Davis, L.J.; Bruneau, C.L.

    1987-05-01

    Acceptance of energy-related technologies by end residential consumers, manufacturers of energy-related products, and other influential intermediate markets such as builders will influence the potential for market penetration of innovative energy-related technologies developed by the Department of Energy, Office of Building and Community Systems (OBCS). In this report, Pacific Northwest Laboratory reviewed the available information on technology adoption, diffusion, and decision-making processes to provide OBCS with a background and understanding of the type of research that has previously been conducted on this topic. Insight was gained as to the potential decision-making criteria and motivating factors that influence the decision-maker(s) selection of new technologies, and some of the barriers to technology adoption faced by potential markets for OBCS technologies.

  18. Promoting Residential Renewable Energy via Peer-to-Peer Learning

    Science.gov (United States)

    Heiskanen, Eva; Nissilä, Heli; Tainio, Pasi

    2017-01-01

    Peer-to-peer learning is gaining increasing attention in nonformal community-based environmental education. This article evaluates a novel modification of a concept for peer-to-peer learning about residential energy solutions (Open Homes). We organized collective "Energy Walks" visiting several homes with novel energy solutions and…

  19. Performance Verification of Production-Scalable Energy-Efficient Solutions: Winchester/Camberley Homes Mixed-Humid Climate

    Energy Technology Data Exchange (ETDEWEB)

    Mallay, D.; Wiehagen, J.

    2014-07-01

    Winchester/Camberley Homes with the Building America program and its NAHB Research Center Industry Partnership collaborated to develop a new set of high performance home designs that could be applicable on a production scale. The new home designs are to be constructed in the mixed humid climate zone four and could eventually apply to all of the builder's home designs to meet or exceed future energy codes or performance-based programs. However, the builder recognized that the combination of new wall framing designs and materials, higher levels of insulation in the wall cavity, and more detailed air sealing to achieve lower infiltration rates changes the moisture characteristics of the wall system. In order to ensure long term durability and repeatable successful implementation with few call-backs, this report demonstrates through measured data that the wall system functions as a dynamic system, responding to changing interior and outdoor environmental conditions within recognized limits of the materials that make up the wall system. A similar investigation was made with respect to the complete redesign of the heating, cooling, air distribution, and ventilation systems intended to optimize the equipment size and configuration to significantly improve efficiency while maintaining indoor comfort. Recognizing the need to demonstrate the benefits of these efficiency features, the builder offered a new house model to serve as a test case to develop framing designs, evaluate material selections and installation requirements, changes to work scopes and contractor learning curves, as well as to compare theoretical performance characteristics with measured results.

  20. The Evolution of the ATLAS Region of Interest Builder

    CERN Document Server

    Love, Jeremy; The ATLAS collaboration

    2018-01-01

    The ATLAS trigger system is deployed to reduce the event rate from the Large Hadron Collider bunch crossing frequency of 40 MHz to 1 kHz for permanent storage using a tiered system. In the PC trigger farm decisions are seeded by Regions of Interest found by the custom hardware trigger system. The Regions of Interest are collected and distributed to the farm at 100 kHz by the ATLAS Region of Interest Builder. The Evolution of the Region of Interest Builder from a crate of custom VME-based electronics to a commodity PC hosting a single custom PCIe card has been undertaken to increase the system performance, flexibility, and ease maintenance. The functionality and performance of the Region of Interest Builder previously only possible using FPGAs and a custom backplane VME Crate, has now been implemented in a multi-threaded C++ software library interfaced to a single PCIe card with one Xilinx Vertex 6 FPGA. The PC-based system was installed in the ATLAS Data Acquisition system between the 2015 and 2016 data takin...

  1. Architectural style and green spaces predict older adults' evaluations of residential facilities.

    Science.gov (United States)

    Cerina, Veronica; Fornara, Ferdinando; Manca, Sara

    2017-09-01

    The purpose of this study was to analyse the effects of residential facilities' design features on older adults' psychosocial responses. Participants ( N  = 192) were over 65-year-old residents who were randomly exposed to different experimental scenarios concerning a hypothetical residential facility for older adults, using a 3 × 2 between-subjects design (i.e. home-like vs. hotel-like vs. usual-standard architectural style; presence vs. absence of green spaces). After the experimental session, participants were asked to fill in a questionnaire that measured their attitudes towards short- and long-term relocation, anticipated residential satisfaction with the facility, and feelings of broken home attachment. The results showed (1) more positive responses to "home-like" and "hotel-like" architectural styles than the usual-standard type and (2) the positive impact of green spaces on the assessment of the facilities. These design features should thus play a role in both reducing the stressful impact of leaving home and promoting beneficial patterns, hence fostering "successful ageing".

  2. The HomePort System

    DEFF Research Database (Denmark)

    Brønsted, Jeppe Rørbæk; Skou, Arne Joachim; Madsen, Per Printz

    2010-01-01

    Residential gateways for home automation are prerequisites to obtain optimal exploitation of energy resources, and they also have the potential to provide a unified operation of various home devices and appliances. Although a number of protocol standards have been proposed, the number...

  3. A Cost-Effective Electric Vehicle Charging Method Designed For Residential Homes with Renewable Energy

    Science.gov (United States)

    Lie, T. T.; Liang, Xiuli; Haque, M. H.

    2015-03-01

    Most of the electrical infrastructure in use around the world today is decades old, and may be illsuited to widespread proliferation of personal Electric Vehicles (EVs) whose charging requirements will place increasing strain on grid demand. In order to reduce the pressure on the grid and taking benefits of off peak charging, this paper presents a smart and cost effective EV charging methodology for residential homes equipped with renewable energy resources such as Photovoltaic (PV) panels and battery. The proposed method ensures slower battery degradation and prevents overcharging. The performance of the proposed algorithm is verified by conducting simulation studies utilizing running data of Nissan Altra. From the simulation study results, the algorithm is shown to be effective and feasible which minimizes not only the charging cost but also can shift the charging time from peak value to off-peak time.

  4. In search of a representative sample of residential building work.

    Science.gov (United States)

    Lobb, Brenda; Woods, Gregory R

    2012-09-01

    Most research investigating injuries in construction work is limited by reliance on work samples unrepresentative of the multiple, variable-cycle tasks involved, resulting in incomplete characterisation of ergonomic exposures. In this case study, a participatory approach was used including hierarchical task analysis and site observations of a typical team of house builders in New Zealand, over several working days, to obtain a representative work sample. The builders' work consisted of 14 goal-defined jobs using varying subsets of 15 task types, each taking from less than 1 s to more than 1 h and performed in a variety of postures. Task type and duration varied within and between participants and days, although all participants spent at least 25% of the time moving from place to place, mostly carrying materials, and more than half the time either reaching up or bending down to work. This research has provided a description of residential building work based on a work sample more nearly representative than those previously published and has demonstrated a simple, low-cost but robust field observation method that can provide a valid basis for further study of hazard exposures. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  5. Commercialization of residential fuel cell systems at Tokyo Gas

    Energy Technology Data Exchange (ETDEWEB)

    Watanabe, Hisao; Kameyama, Hiromichi; Okamura, Kiyoshi; Nishizaki, Kunihiro

    2007-07-01

    Increased affluence at homes may inevitably bring about increased energy consumption with it and hence increased CO2 emission from the residential sector, which accounts for a substantial share in the overall CO2 emission. Technologies that can reduce CO2 emission without sacrificing comfort of living at home will be critically important to achieve economic prosperity and preservation of the global environment at the same time. The residential fuel cell system is one of those technologies. Tokyo Gas has been engaging in its development cooperating with the manufacturers and has been playing an important role in the design, development and promotion of fuel cell systems with its vast knowledge and experience of end users' energy consumption. The development, demonstration and promotion of fuel cell systems have been strongly supported by the Japanese Government. In 'the Large Scale Demonstration Project', more than 1000 units of polymer electrolyte fuel cells have been installed to existing homes and have demonstrated their energy saving and CO2 emission reduction potential. This paper reports the status of the development of residential fuel cell systems in Japan and the role Tokyo Gas plays in it.

  6. Integrated Payment And Delivery Models Offer Opportunities And Challenges For Residential Care Facilities.

    Science.gov (United States)

    Grabowski, David C; Caudry, Daryl J; Dean, Katie M; Stevenson, David G

    2015-10-01

    Under health care reform, new financing and delivery models are being piloted to integrate health and long-term care services for older adults. Programs using these models generally have not included residential care facilities. Instead, most of them have focused on long-term care recipients in the community or the nursing home. Our analyses indicate that individuals living in residential care facilities have similarly high rates of chronic illness and Medicare utilization when compared with matched individuals in the community and nursing home, and rates of functional dependency that fall between those of their counterparts in the other two settings. These results suggest that the residential care facility population could benefit greatly from models that coordinated health and long-term care services. However, few providers have invested in the infrastructure needed to support integrated delivery models. Challenges to greater care integration include the private-pay basis for residential care facility services, which precludes shared savings from reduced Medicare costs, and residents' preference for living in a home-like, noninstitutional environment. Project HOPE—The People-to-People Health Foundation, Inc.

  7. Construction cost impact analysis of the U.S. Department of Energy mandatory performance standards for new federal commercial and multi-family, high-rise residential buildings

    International Nuclear Information System (INIS)

    Di Massa, F.V.; Hadley, D.L.; Halverson, M.A.

    1993-12-01

    In accordance with federal legislation, the U.S. Department of Energy (DOE) has conducted a project to demonstrate use of its Energy Conservation Voluntary Performance Standards for Commercial and Multi-Family High-Rise Residential Buildings; Mandatory for New Federal Buildings; Interim Rule (referred to in this report as DOE-1993). A key requisite of the legislation requires DOE to develop commercial building energy standards that are cost effective. During the demonstration project, DOE specifically addressed this issue by assessing the impacts of the standards on (1) construction costs, (2) builders (and especially small builders) of multi-family, high-rise buildings, and (3) the ability of low-to moderate-income persons to purchase or rent units in such buildings. This document reports on this project

  8. ASHRAE and residential ventilation

    Energy Technology Data Exchange (ETDEWEB)

    Sherman, Max H.

    2003-10-01

    In the last quarter of a century, the western world has become increasingly aware of environmental threats to health and safety. During this period, people psychologically retreated away from outdoors hazards such as pesticides, smog, lead, oil spills, and dioxin to the seeming security of their homes. However, the indoor environment may not be healthier than the outdoor environment, as has become more apparent over the past few years with issues such as mold, formaldehyde, and sick-building syndrome. While the built human environment has changed substantially over the past 10,000 years, human biology has not; poor indoor air quality creates health risks and can be uncomfortable. The human race has found, over time, that it is essential to manage the indoor environments of their homes. ASHRAE has long been in the business of ventilation, but most of the focus of that effort has been in the area of commercial and institutional buildings. Residential ventilation was traditionally not a major concern because it was felt that, between operable windows and envelope leakage, people were getting enough outside air in their homes. In the quarter of a century since the first oil shock, houses have gotten much more energy efficient. At the same time, the kinds of materials and functions in houses changed in character in response to people's needs. People became more environmentally conscious and aware not only about the resources they were consuming but about the environment in which they lived. All of these factors contributed to an increasing level of public concern about residential indoor air quality and ventilation. Where once there was an easy feeling about the residential indoor environment, there is now a desire to define levels of acceptability and performance. Many institutions--both public and private--have interests in Indoor Air Quality (IAQ), but ASHRAE, as the professional society that has had ventilation as part of its mission for over 100 years, is the

  9. Exploring the Relationship between Conduct Disorder and Residential Treatment Outcomes

    Science.gov (United States)

    Shabat, Julia Cathcart; Lyons, John S.; Martinovich, Zoran

    2008-01-01

    We examined the differential outcomes in residential treatment for youths with conduct disorder (CD)--with special attention paid to interactions with age and gender--in a sample of children and adolescents in 50 residential treatment centers and group homes across Illinois. Multi-disciplinary teams rated youths ages 6-20 (N = 457) on measures of…

  10. Solving the "Personhood Jigsaw Puzzle" in Residential Care Homes for the Elderly in the Hong Kong Chinese Context.

    Science.gov (United States)

    Kong, Sui-Ting; Fang, Christine Meng-Sang; Lou, Vivian W Q

    2017-02-01

    End-of-life care studies on the nature of personhood are bourgeoning; however, the practices utilized for achieving personhood in end-of-life care, particularly in a cultural context in which interdependent being and collectivism prevail, remain underexplored. This study seeks to examine and conceptualize good practices for achieving the personhood of the dying elderly in residential care homes in a Chinese context. Twelve interviews were conducted with both medical and social care practitioners in four care homes to collect narratives of practitioners' practices. Those narratives were utilized to develop an "end-of-life case graph." Constant comparative analysis led to an understanding of the practice processes, giving rise to a process model of "solving the personhood jigsaw puzzle" that includes "understanding the person-in-relationship and person-in-time," "identifying the personhood-inhibiting experiences," and "enabling personalized care for enhanced psychosocial outcomes." Findings show how the "relational personhood" of the elderly can be maintained when physical deterioration and even death are inevitable.

  11. Heat Pump Water Heater Technology: Experiences of Residential Consumers and Utilities

    Energy Technology Data Exchange (ETDEWEB)

    Ashdown, BG

    2004-08-04

    benefits. Because it produces hot water by extracting heat from the air it tends to dehumidify and cool the room in which it is placed. Moreover, it tends to spread the water heating load across utility non-peak periods. Thus, electric utilities with peak load issues could justify internal programs to promote this technology to residential and commercial customers. For practical purposes, consumers are indifferent to the manner in which water is heated but are very interested in product attributes such as initial first cost, operating cost, performance, serviceability, product size, and installation costs. Thus, the principal drivers for penetrating markets are demonstrating reliability, leveraging the dehumidification attributes of the HPWH, and creating programs that embrace life-cycle cost principles. To supplement this, a product warranty with scrupulous quality control should be implemented; first-price reduction through engineering, perhaps by reducing level of energy efficiency, should be pursued; and niche markets should be courted. The first step toward market penetration is to address the HPWH's performance reliability. Next, the manufacturers could engage select utilities to aggressively market the HPWH. A good approach would be to target distinct segments of the market with the potential for the highest benefits from the technology. Communications media that address performance issues should be developed. When marketing to new home builders, the HPWH could be introduced as part of an energy-efficient package offered as a standard feature by builders of new homes within a community. Conducting focus groups across the United States to gather input on HPWH consumer values will feed useful data back to the manufacturers. ''Renaming'' and ''repackaging'' the HPWH to improve consumer perception, appliance aesthetics, and name recognition should be considered. Once an increased sales volume is achieved, the manufacturers

  12. High Performance Walls in Hot-Dry Climates

    Energy Technology Data Exchange (ETDEWEB)

    Hoeschele, Marc [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States); Springer, David [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States); Dakin, Bill [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States); German, Alea [Alliance for Residential Building Innovation (ARBI), Davis, CA (United States)

    2015-01-01

    High performance walls represent a high priority measure for moving the next generation of new homes to the Zero Net Energy performance level. The primary goal in improving wall thermal performance revolves around increasing the wall framing from 2x4 to 2x6, adding more cavity and exterior rigid insulation, achieving insulation installation criteria meeting ENERGY STAR's thermal bypass checklist. To support this activity, in 2013 the Pacific Gas & Electric Company initiated a project with Davis Energy Group (lead for the Building America team, Alliance for Residential Building Innovation) to solicit builder involvement in California to participate in field demonstrations of high performance wall systems. Builders were given incentives and design support in exchange for providing site access for construction observation, cost information, and builder survey feedback. Information from the project was designed to feed into the 2016 Title 24 process, but also to serve as an initial mechanism to engage builders in more high performance construction strategies. This Building America project utilized information collected in the California project.

  13. Census Bureau Reports at Least 350 Languages Spoken in U.S. Homes

    Science.gov (United States)

    Employment and Payroll Survey of Business Owners Work from Home Our statistics highlight trends in household statistics from multiple surveys. Data Tools & Apps Main American FactFinder Census Business Builder My Classification Codes (i.e., NAICS) Economic Census Economic Indicators Economic Studies Industry Statistics

  14. Research Toward Zero Energy Homes

    Energy Technology Data Exchange (ETDEWEB)

    Robert Hammon

    2010-12-31

    This final report was compiled from the detailed annual reports that were submitted for efforts in 2008 and 2009, and from individual task reports from 2010. Reports, case studies, and presentations derived from this work are available through the Building America website. The BIRA team is led by ConSol, a leading provider of energy solutions for builders since 1983. In partnership with over fifty builders, developers, architects, manufactures, researchers, utilities, and agencies, research work was performed in California, Colorado, Utah, New Mexico, Washington, Oregon, and Hawaii and five (5) climate regions (Hot-Dry, Marine, Hot-Humid, Cold, and Hot/Mixed Dry). In addition to research work, the team provided technical assistance to our partners whose interests span the entire building process. During the three year budget period, the BIRA team performed analyses of several emerging technologies, prototype homes, and high performance communities through detailed computer simulations and extensive field monitoring to meet the required climate joule milestone targets.

  15. Deleterious effects of anabolic steroids on serum lipoproteins, blood pressure, and liver function in amateur body builders

    NARCIS (Netherlands)

    Lenders, J. W.; Demacker, P. N.; Vos, J. A.; Jansen, P. L.; Hoitsma, A. J.; van 't Laar, A.; Thien, T.

    1988-01-01

    The effects of self-administered anabolic steroids (AS) on lipoproteins, liver function, and blood pressure were studied in male amateur body builders. Twenty body builders were studied at the end of a course of AS (group 1) and 42 body builders were studied after discontinuation of the AS for a

  16. Market Potential for Residential Biomass Heating Equipment: Stochastic and Econometric Assessments

    OpenAIRE

    Adee Athiyaman

    2015-01-01

    This paper provides estimates of market potential for biomass-residential-heating equipment in the US: that is, the greatest amount of biomass-residential-heating equipment that can be sold by the industry. The author's analysis is limited to biomass equipment used most to heat the housing unit. Assuming that households equipped with 10+ year old primary heating devices will replace rather than repair the devices he predicts that approximately 1.4 million units of residential home heating equ...

  17. Why is housing tenure associated with a lower risk of admission to a nursing or residential home? Wealth, health and the incentive to keep 'my home'.

    Science.gov (United States)

    McCann, Mark; Grundy, Emily; O'Reilly, Dermot

    2012-02-01

    Previous research has shown that home ownership is associated with a reduced risk of admission to institutional care. The extent to which this reflects associations between wealth and health, between wealth and ability to buy in care or increased motivation to avoid admission related to policies on charging is unclear. Taking account of the value of the home, as well as housing tenure, may provide some clarification as to the relative importance of these factors. To analyse the probability of admission to residential and nursing home care according to housing tenure and house value. Cox regression was used to examine the association between home ownership, house value and risk of care home admissions over 6 years of follow-up among a cohort of 51 619 people aged 65 years or older drawn from the Northern Ireland Longitudinal Study, a representative sample of ≈28% of the population of Northern Ireland. Results 4% of the cohort (2138) was admitted during follow-up. Homeowners were less likely than those who rented to be admitted to care homes (HR 0.77, 95% CI 0.70 to 0.85, after adjusting for age, sex, health, living arrangement and urban/rural differences). There was a strong association between house value/tenure and health with those in the highest valued houses having the lowest odds of less than good health or limiting long-term illness. However, there was no difference in probability of admission according to house value; HRs of 0.78 (95% CI 0.67 to 0.90) and 0.81 (95% CI 0.70 to 0.95), respectively, for the lowest and highest value houses compared with renters. The requirement for people in the UK with capital resources to contribute to their care is a significant disincentive to institutional admission. This may place an additional burden on carers.

  18. Modular Zero Energy. BrightBuilt Home

    Energy Technology Data Exchange (ETDEWEB)

    Aldrich, Robb [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States). Steven Winters Associates, Inc.; Butterfield, Karla [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States). Steven Winters Associates, Inc.

    2016-03-01

    Kaplan Thompson Architects (KTA) has specialized in sustainable, energy-efficient buildings, and they have designed several custom, zero-energy homes in New England. These zero-energy projects have generally been high-end, custom homes with budgets that could accommodate advanced energy systems. In an attempt to make zero energy homes more affordable and accessible to a larger demographic, KTA explored modular construction as way to provide high-quality homes at lower costs. In the mid-2013, KTA formalized this concept when they launched BrightBuilt Home (BBH). The BBH mission is to offer a line of architect-designed, high-performance homes that are priced to offer substantial savings off the lifetime cost of a typical home and can be delivered in less time. For the past two years, CARB has worked with BBH and Keiser Homes (the primary modular manufacturer for BBH) to discuss challenges related to wall systems, HVAC, and quality control. In Spring of 2014, CARB and BBH began looking in detail on a home to be built in Lincolnville, ME by Black Bros. Builders. This report details the solution package specified for this modular plan and the challenges that arose during the project.

  19. Comfort in High-Performance Homes in a Hot-Humid Climate

    Energy Technology Data Exchange (ETDEWEB)

    Poerschke, A. [IBACOS, Inc., Pittsburgh, PA (United States); Beach, R. [IBACOS, Inc., Pittsburgh, PA (United States)

    2016-01-01

    IBACOS monitored 37 homes during the late summer and early fall of 2014 in a hot and humid climate to better understand indoor comfort conditions. These homes were constructed in the last several years by four home builders that offered a comfort and performance guarantee for the homes. The homes were located in one of four cities: Tampa, Florida; Orlando, Florida; Houston, Texas; and San Antonio, Texas. Temperature and humidity data were collected from the thermostat and each room of the house using small, battery-powered data loggers. To understand system runtime and its impact on comfort, supply air temperature also was measured on a 1-minute interval. Overall, the group of homes only exceeded a room-to-room temperature difference of 6 degrees Fahrenheit for 5% of the time.

  20. 25 CFR 20.509 - What must the social services worker do when a child is placed in foster care or residential care...

    Science.gov (United States)

    2010-04-01

    ... home or residential care facility to law enforcement and protective services in accordance with tribal... Assistance Foster Care § 20.509 What must the social services worker do when a child is placed in foster care... tribal or state licensed foster home or residential care facility evaluating how the home has fulfilled...

  1. Energy Innovations for Healthy Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Bogucz, Edward A. [Syracuse Univ., NY (United States)

    2016-09-23

    Healthy buildings provide high indoor environmental quality for occupants while simultaneously reducing energy consumption. This project advanced the development and marketability of envisioned healthy, energy-efficient buildings through studies that evaluated the use of emerging technologies in commercial and residential buildings. The project also provided resources required for homebuilders to participate in DOE’s Builders Challenge, concomitant with the goal to reduce energy consumption in homes by at least 30% as a first step toward achieving envisioned widespread availability of net-zero energy homes by 2030. In addition, the project included outreach and education concerning energy efficiency in buildings.

  2. Consumer Decision Rules and Residential Finance.

    Science.gov (United States)

    Brandt, Jeanette A.; Jaffe, Austin J.

    1979-01-01

    As guidelines for residential financing, the authors compare different approaches to understanding and figuring the costs of home ownership: the relation of income to house price and housing costs, interest rate, and mortgage term. Instead of the traditional method, they recommend the time value of money approach. (MF)

  3. Assessment of soil metal concentrations in residential and community vegetable gardens in Melbourne, Australia.

    Science.gov (United States)

    Laidlaw, Mark A S; Alankarage, Dileepa H; Reichman, Suzie M; Taylor, Mark Patrick; Ball, Andrew S

    2018-05-01

    Gardening and urban food production is an increasingly popular activity, which can improve physical and mental health and provide low cost nutritious food. However, the legacy of contamination from industrial and diffuse sources may have rendered surface soils in some urban gardens to have metals value in excess of recommended guidelines for agricultural production. The objective of this study was to establish the presence and spatial extent of soil metal contamination in Melbourne's residential and inner city community gardens. A secondary objective was to assess whether soil lead (Pb) concentrations in residential vegetable gardens were associated with the age of the home or the presence or absence of paint. The results indicate that most samples in residential and community gardens were generally below the Australian residential guidelines for all tested metals except Pb. Mean soil Pb concentrations exceeded the Australian HIL-A residential guideline of 300 mg/kg in 8% of 13 community garden beds and 21% of the 136 residential vegetable gardens assessed. Mean and median soil Pb concentrations for residential vegetable gardens was 204 mg/kg and 104 mg/kg (range soil Pb concentration for community vegetable garden beds was 102 mg/kg and 38 mg/kg (range = 17-578 mg/kg), respectively. Soil Pb concentrations were higher in homes with painted exteriors (p = 0.004); generally increased with age of the home (p = 0.000); and were higher beneath the household dripline than in vegetable garden beds (p = 0.040). In certain circumstances, the data indicates that elevated soil Pb concentrations could present a potential health hazard in a portion of inner-city residential vegetable gardens in Melbourne. Copyright © 2018 Elsevier Ltd. All rights reserved.

  4. The linkage between the lifestyle of knowledge-workers and their intra-metropolitan residential choice: A clustering approach based on self-organizing maps

    DEFF Research Database (Denmark)

    Frenkel, Amnon; Bendit, Edward; Kaplan, Sigal

    2013-01-01

    -Aviv metropolitan area and are analyzed with self-organizing maps for pattern recognition and classification. Five clusters are identified: nest-builders, bon-vivants, careerists, entrepreneurs and laid-back. Bon-vivants and entrepreneurs differ in their dwelling size and home-ownership, although both prefer...

  5. Exploring the beliefs of Australian prefabricated house builders

    Directory of Open Access Journals (Sweden)

    Dale A Steinhardt

    2016-06-01

    Full Text Available The housing sector accounts for a majority of newly constructed buildings. Prefabrication, defined as the factory construction of houses or significant components, is widely promoted as a means to improve efficiency. This paper focuses on the research questions: RQ1. What are the attitudes of builders towards prefabrication adoption? RQ2. What types of stakeholders do builders believe influence their adoption decisions? RQ3. What types of contextual influences do builders believe impact their adoption decisions? Current prefabrication research has focused on the advantages and disadvantages of prefabrication, without further unpacking the beliefs of stakeholders that underpin them. This paper addresses this gap and increases the understanding of beliefs that can frame interventions to increase the market penetration of prefabrication. Fourteen interviews with Australian prefabricators were undertaken as a Belief Elicitation Study. This qualitative methodology is framed by the Theory of Planned Behaviour (TPB and the Technology Acceptance Model (TAM. Results show that modern high-quality prefabricated housing has struggled to overcome historical stigma; improved construction speed has not and is not likely to translate to reduced totals costs for a majority of firms; and prefabrication adoption has been hindered by an almost completely unsupportive industry infrastructure. Recommendations are made to frame arguments in improving short-term outcomes for an industry driven by practical considerations. Future discourse must focus on cost impacts, financial security and risk reduction. Establishing networks of prefabricators that can build a strong, unified voice for the industry should be prioritised.

  6. Energy literacy, awareness, and conservation behavior of residential households

    International Nuclear Information System (INIS)

    Brounen, Dirk; Kok, Nils; Quigley, John M.

    2013-01-01

    The residential sector accounts for one-fifth of global energy consumption, resulting from the requirements to heat, cool, and light residential dwellings. It is therefore not surprising that energy efficiency in the residential market has gained importance in recent years. In this paper, we examine awareness, literacy and behavior of households with respect to their residential energy expenditures. Using a detailed survey of 1721 Dutch households, we measure the extent to which consumers are aware of their energy consumption and whether they have taken measures to reduce their energy costs. Our results show that “energy literacy” and awareness among respondents is low: just 56% of the respondents are aware of their monthly charges for energy consumption, and 40% do not appropriately evaluate investment decisions in energy efficient equipment. We document that demographics and consumer attitudes towards energy conservation, but not energy literacy and awareness, have direct effects on behavior regarding heating and cooling of the home. The impact of a moderating factor, measured by thermostat settings, ultimately results in strong variation in the energy consumption of private consumers. - Highlights: • We use a detailed survey of 1,721 Dutch households to measure awareness and conservation behavior in energy consumption. • Energy literacy and awareness among residential households is low. • 40 percent of the sample does not appropriately evaluate investment decisions in energy efficient equipment • Demographics and consumer attitudes affect behavior regarding heating and cooling of a home

  7. Residential mercury contamination in adobe brick homes in Huancavelica, Peru.

    Science.gov (United States)

    Hagan, Nicole; Robins, Nicholas; Hsu-Kim, Heileen; Halabi, Susan; Espinoza Gonzales, Ruben Dario; Richter, Daniel deB; Vandenberg, John

    2013-01-01

    This is the first study of adobe brick contamination anywhere in the world. Huancavelica, Peru is the site of historic cinnabar refining and one of the most mercury (Hg) contaminated urban areas in the world. Over 80% of homes in Huancavelica are constructed with adobe bricks made from Hg contaminated soil. In this study we measured total Hg concentrations in adobe brick, dirt floor, surface dust, and air samples from the interior of 60 adobe brick houses located in four neighborhoods. Concentrations of total Hg in adobe bricks, dirt floors, and surface dust ranged from 8.00 to 1070 µg/g, 3.06 to 926 µg/g, and 0.02 to 9.69 µg/wipe, respectively, with statistically significant differences between the four neighborhoods. Concentrations of Hg in adobe brick and dirt floor samples in Huancavelica were orders of magnitude higher than in Ayacucho, a non-mining town in Peru. A strong correlation exists between total Hg concentrations in adobe bricks and dirt floors which confirms that adobe bricks were being made on-site and not purchased from an off-site source. A strong correlation between surface dust and adobe bricks and dirt floors indicates that walls and floors serve as indoor sources of Hg contamination. Elemental Hg vapor concentrations were below detection (adobe bricks, may be a substantial source of residential Hg exposure in silver or gold refining communities where Hg is produced or used for amalgamation in artisanal gold production.

  8. Provisions for the pyramid builders: new evidence from the ancient site of Giza

    Directory of Open Access Journals (Sweden)

    Mary Anne Murray

    2004-08-01

    Full Text Available The great pyramids of Giza are famous emblems of ancient Egyptian civilization, but until recently little was known about where and how the pyramid builders lived. The site of their large settlement has now been found, and excavation is revealing its complex layout and providing evidence of the plants and animals on which the builders depended for their food supply.

  9. Provisions for the pyramid builders: new evidence from the ancient site of Giza

    OpenAIRE

    Mary Anne Murray

    2004-01-01

    The great pyramids of Giza are famous emblems of ancient Egyptian civilization, but until recently little was known about where and how the pyramid builders lived. The site of their large settlement has now been found, and excavation is revealing its complex layout and providing evidence of the plants and animals on which the builders depended for their food supply.

  10. Mining usage patterns in residential intranet of things

    OpenAIRE

    Poghosyan , Gevorg; Pefkianakis , Ioannis; Le Guyadec , Pascal; Christophides , Vassilis

    2016-01-01

    International audience; Ubiquitous smart technologies gradually transform modern homes into Intranet of Things, where a multitude of connected devices allow for novel home automation services (e.g., energy or bandwidth savings, comfort enhancement, etc.). Optimizing and enriching the Quality of Experience (QoE) of residential users emerges as a critical differentiator for Internet and Communication Service providers (ISPs and CSPs, respectively) and heavily relies on the analysis of various k...

  11. Advancing Replicable Solutions for High-Performance Homes in the Southeast

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, S. G. [Southface Energy Inst., Upper Marlboro, MD (United States); Sweet, M. L. [Southface Energy Inst., Upper Marlboro, MD (United States); Francisco, A. [Southface Energy Inst., Upper Marlboro, MD (United States)

    2016-03-01

    Southface Energy Institute (Southface) partnered with owners and/or builders with various market constraints and ultimate goals for three projects in different climate zones: Savannah, GA (CZ 2), Clemson, SC (CZ 3), and LaFayette, GA (CZ 4). This report documents the design process, computational energy modeling, construction, envelope performance metrics, long-term monitoring results, and successes and failures of the design and execution of these high performance homes. The three bedroom/two bathroom test home in Savannah Gardens on an elevated slab foundation has a semi-conditioned, encapsulated attic. A neighboring home built to EarthCraft specifications was also monitored as a control for exterior foam insulation and a heat pump water heater (HPWH). For the JMC Patrick Square, a single-story project in Clemson, the small-scale production builder wanted to increase their level of energy efficiency beyond their current green building practices, including bringing ducts into conditioned space. Through a combination of upgrade measures the team met this goal and achieved many Zero Energy Ready Home requirements. LaFayette Housing Authority undertook a development of 30 affordable rental housing units in 15 duplexes in LaFayette, GA. Because they would be long-term owners, their priorities were low utility bills for the residents and durable, maintainable buildings. The team employed BEopt to optimize buildling envelope and systems choices, including 2x6 advanced framed walls, insulated slab, and heat pump water heater in a utility closet which was ducted to/from an encapsulated attic.

  12. Face to Face Tinker, Builder, Physicist, and Teacher !

    Indian Academy of Sciences (India)

    to science, highlighting the factors and circumstances that guided them in making the career choice to be a scientist. Tinker, Builder, Physicist, and .... Did you feel its influence on your environment in physics? MF: Stanford did want to bring ...

  13. Performance and Costs of Ductless Heat Pumps in Marine-Climate High-Performance Homes -- Habitat for Humanity The Woods

    Energy Technology Data Exchange (ETDEWEB)

    Lubliner, Michael [Building America Partnership for Improved Residential Construction, Olympia, WA (United States). Washington States Univ. Energy Program; Howard, Luke [Building America Partnership for Improved Residential Construction, Olympia, WA (United States). Washington States Univ. Energy Program; Hales, David [Building America Partnership for Improved Residential Construction, Olympia, WA (United States). Washington States Univ. Energy Program; Kunkle, Rick [Building America Partnership for Improved Residential Construction, Olympia, WA (United States). Washington States Univ. Energy Program; Gordon, Andy [Building America Partnership for Improved Residential Construction, Olympia, WA (United States). Washington States Univ. Energy Program; Spencer, Melinda [Building America Partnership for Improved Residential Construction, Olympia, WA (United States). Washington States Univ. Energy Program

    2016-02-18

    The Woods is a Habitat for Humanity (HFH) community of ENERGY STAR Homes Northwest (ESHNW)-certified homes located in the marine climate of Tacoma/Pierce County, Washington. This research report builds on an earlier preliminary draft 2014 BA report, and includes significant billing analysis and cost effectiveness research from a collaborative, ongoing Ductless Heat Pump (DHP)research effort for Tacoma Public Utilities (TPU) and Bonneville Power Administration (BPA). This report focuses on the results of field testing, modeling, and monitoring of ductless mini-split heat pump hybrid heating systems in seven homes built and first occupied at various times between September 2013 and October 2014. The report also provides WSU documentation of high-performance home observations, lessons learned, and stakeholder recommendations for builders of affordable high-performance housing such as HFH. Tacoma Public Utilities (TPU) and Bonneville Power Administration (BPA). This report focuses on the results of field testing, modeling, and monitoring of ductless mini-split heat pump hybrid heating systems in seven homes built and first occupied at various times between September 2013 and October 2014. The report also provides WSU documentation of high-performance home observations, lessons learned, and stakeholder recommendations for builders of affordable high-performance housing such as HFH.

  14. Outcomes in knowledge, attitudes and confidence of nursing staff working in nursing and residential care homes following a dementia training programme.

    Science.gov (United States)

    Scerri, Anthony; Scerri, Charles

    2017-11-08

    Dementia training programmes for staff working in long-term care settings have been found to be effective in improving staff outcomes. This study investigated the impact of a dementia training programme for all Maltese nursing staff working in public nursing/residential homes on their knowledge, attitudes and confidence. Additionally, we identified the predictors of these domains before and after the programme. A 14-hour training programme focusing on dementia management, care and policy was developed for all nursing staff working in public nursing and residential homes in Malta. A pretest-posttest design was used to evaluate the participants' knowledge of dementia, attitudes and confidence in working with residents with dementia using validated tools. Demographic variables were measured and compared with each staff domain. The majority of nursing staff attended the training programme with 261 fully completed questionnaires being collected pre-training and 214 post-training. The programme significantly improved nursing staff knowledge, attitudes and confidence. Stepwise regression analysis of each staff domain showed that the strongest predictor in all models at pre-training was the intensity of previous training programmes. Furthermore, staff who attended previous training continued to improve in their attitudes and confidence following programme completion. The study continues to shed further evidence on the impact of dementia training programs on staff outcomes. It also indicated that the intensity of previous participation in dementia training programmes was related to the participants' knowledge, attitudes and confidence and that continual exposure to training had a cumulative effect.

  15. Strategy Guideline: Partnering for High Performance Homes

    Energy Technology Data Exchange (ETDEWEB)

    Prahl, D.

    2013-01-01

    High performance houses require a high degree of coordination and have significant interdependencies between various systems in order to perform properly, meet customer expectations, and minimize risks for the builder. Responsibility for the key performance attributes is shared across the project team and can be well coordinated through advanced partnering strategies. For high performance homes, traditional partnerships need to be matured to the next level and be expanded to all members of the project team including trades, suppliers, manufacturers, HERS raters, designers, architects, and building officials as appropriate. In an environment where the builder is the only source of communication between trades and consultants and where relationships are, in general, adversarial as opposed to cooperative, the chances of any one building system to fail are greater. Furthermore, it is much harder for the builder to identify and capitalize on synergistic opportunities. Partnering can help bridge the cross-functional aspects of the systems approach and achieve performance-based criteria. Critical success factors for partnering include support from top management, mutual trust, effective and open communication, effective coordination around common goals, team building, appropriate use of an outside facilitator, a partnering charter progress toward common goals, an effective problem-solving process, long-term commitment, continuous improvement, and a positive experience for all involved.

  16. Strategy Guideline. High Performance Residential Lighting

    Energy Technology Data Exchange (ETDEWEB)

    Holton, J. [IBACOS, Inc., Pittsburgh, PA (United States)

    2012-02-01

    This report has been developed to provide a tool for the understanding and application of high performance lighting in the home. The strategies featured in this guide are drawn from recent advances in commercial lighting for application to typical spaces found in residential buildings. This guide offers strategies to greatly reduce lighting energy use through the application of high quality fluorescent and light emitting diode (LED) technologies. It is important to note that these strategies not only save energy in the home but also serve to satisfy the homeowner’s expectations for high quality lighting.

  17. Building Footprints, Primarily residential, at risk buildings such as hospitals, nursing homes, etc for use in Emergency Management Hazard Mitigation planning., Published in 2010, 1:4800 (1in=400ft) scale, Carroll County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Building Footprints dataset current as of 2010. Primarily residential, at risk buildings such as hospitals, nursing homes, etc for use in Emergency Management Hazard...

  18. Residential Pre-Cooling: Mechanical Cooling and Air-Side Economizers:

    OpenAIRE

    Turner, William J.N; Walker, Iain S.; Roux, Jordan

    2012-01-01

    This study used an advanced airflow, energy and humidity modeling tool to evaluate residential air-side economizers and mechanical pre-cooling strategies using the air conditioner, in all US DOE Climate Zones for a typical new home with ASHRAE Standard 62.2 compliant ventilation. A residential air-side economizer is a large supply fan used for night ventilation. Mechanical pre-cooling used the building air conditioner operating at lower than usual set before the peak demand period. The simula...

  19. 78 FR 42122 - Bridge Builder Trust and Olive Street Investment Advisers, LLC; Notice of Application

    Science.gov (United States)

    2013-07-15

    ... SECURITIES AND EXCHANGE COMMISSION [Investment Company Act Release No. 30592; 812-14118] Bridge...: Bridge Builder Trust (the ``Trust'') and Olive Street Investment Advisers (the ``Adviser'') (collectively... the requested order as a Fund is the Bridge Builder Bond Fund. For purposes of the requested order...

  20. The decision of out-of-home placement in residential care after parental neglect: Empirically testing a psychosocial model.

    Science.gov (United States)

    Rodrigues, Leonor; Calheiros, Manuela; Pereira, Cícero

    2015-11-01

    Out-of-home placement decisions in residential care are complex, ambiguous and full of uncertainty, especially in cases of parental neglect. Literature on this topic is so far unable to understand and demonstrate the source of errors involved in those decisions and still fails to focus on professional's decision making process. Therefore, this work intends to test a socio-psychological model of decision-making that is a more integrated, dualistic and ecological version of the Theory of Planned Behavior's model. It describes the process through which the decision maker takes into account personal, contextual and social factors of the Decision-Making Ecology in the definition of his/her decision threshold. One hundred and ninety-five professionals from different Children and Youth Protection Units, throughout the Portuguese territory, participated in this online study. After reading a vignette of a (psychological and physical) neglect case toward a one-year-old child, participants were presented with a group of questions that measured worker's assessment of risk, intention, attitude, subjective norm, behavior control and beliefs toward residential care placement decision, as well as worker's behavior experience, emotions and family/child-related-values involved in that decision. A set of structural equation modeling analyses have proven the good fit of the proposed model. The intention to propose a residential care placement decision was determined by cognitive, social, affective, value-laden and experience variables and the perceived risk. Altogether our model explained 61% of professional's decision toward a parental neglect case. The theoretical and practical implications of these results are discussed, namely the importance of raising awareness about the existence of these biased psychosocial determinants. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. A GA Evolving Instructions for a Timetable Builder

    NARCIS (Netherlands)

    Blum, Christian; Correia, Sebastiao; Dorigo, Marco; Paechter, Ben; Rossi-Doria, Olivia; Snoek, M.; Burke, E.; De Causmaecker, P.

    2002-01-01

    In this work we present a Genetic Algorithm for tackling timetabling problems. Our approach uses an indirect solution representation, which denotes a number if instructions for a timetable builder on how to sequentially build a solution. These instructions are composed by a set of predefined

  2. Correction of gynecomastia in body builders and patients with good physique.

    Science.gov (United States)

    Blau, Mordcai; Hazani, Ron

    2015-02-01

    Temporary gynecomastia in the form of breast buds is a common finding in young male subjects. In adults, permanent gynecomastia is an aesthetic impairment that may result in interest in surgical correction. Gynecomastia in body builders creates an even greater distress for patients seeking surgical treatment because of the demands of professional competition. The authors present their experience with gynecomastia in body builders as the largest study of such a group in the literature. Between the years 1980 and 2013, 1574 body builders were treated surgically for gynecomastia. Of those, 1073 were followed up for a period of 1 to 5 years. Ages ranged from 18 to 51 years. Subtotal excision in the form of subcutaneous mastectomy with removal of at least 95 percent of the glandular tissue was used in virtually all cases. In cases where body fat was extremely low, liposuction was performed in fewer than 2 percent of the cases. Aesthetically pleasing results were achieved in 98 percent of the cases based on the authors' patient satisfaction survey. The overall rate of hematomas was 9 percent in the first 15 years of the series and 3 percent in the final 15 years. There were no infections, contour deformities, or recurrences. This study demonstrates the importance of direct excision of the glandular tissue over any other surgical technique when correcting gynecomastia deformities in body builders. The novice surgeon is advised to proceed with cases that are less challenging, primarily with patients that require excision of small to medium glandular tissue. Therapeutic, IV.

  3. Integration of QoS provisioning in home and access networks

    DEFF Research Database (Denmark)

    Popov, Mikhail; Gavler, A.; Sköldström, P.

    2010-01-01

    Approaches for QoS provisioning using UPnP for home networks and GMPLS for access networks are described. A solution for interworking the UPnP and the GMPLS at the residential gateway is proposed.......Approaches for QoS provisioning using UPnP for home networks and GMPLS for access networks are described. A solution for interworking the UPnP and the GMPLS at the residential gateway is proposed....

  4. Automated 3D Damaged Cavity Model Builder for Lower Surface Acreage Tile on Orbiter

    Science.gov (United States)

    Belknap, Shannon; Zhang, Michael

    2013-01-01

    The 3D Automated Thermal Tool for Damaged Acreage Tile Math Model builder was developed to perform quickly and accurately 3D thermal analyses on damaged lower surface acreage tiles and structures beneath the damaged locations on a Space Shuttle Orbiter. The 3D model builder created both TRASYS geometric math models (GMMs) and SINDA thermal math models (TMMs) to simulate an idealized damaged cavity in the damaged tile(s). The GMMs are processed in TRASYS to generate radiation conductors between the surfaces in the cavity. The radiation conductors are inserted into the TMMs, which are processed in SINDA to generate temperature histories for all of the nodes on each layer of the TMM. The invention allows a thermal analyst to create quickly and accurately a 3D model of a damaged lower surface tile on the orbiter. The 3D model builder can generate a GMM and the correspond ing TMM in one or two minutes, with the damaged cavity included in the tile material. A separate program creates a configuration file, which would take a couple of minutes to edit. This configuration file is read by the model builder program to determine the location of the damage, the correct tile type, tile thickness, structure thickness, and SIP thickness of the damage, so that the model builder program can build an accurate model at the specified location. Once the models are built, they are processed by the TRASYS and SINDA.

  5. 25 CFR 20.508 - What must the social services agency do when a child is placed in foster care, residential care...

    Science.gov (United States)

    2010-04-01

    ... PROGRAMS Child Assistance Foster Care § 20.508 What must the social services agency do when a child is placed in foster care, residential care or guardianship home? The social services agency must make... placed in foster care, residential care or guardianship home? 20.508 Section 20.508 Indians BUREAU OF...

  6. A new home energy management algorithm with voltage control in a smart home environment

    International Nuclear Information System (INIS)

    Elma, Onur; Selamogullari, Ugur Savas

    2015-01-01

    Energy management in electrical systems is one of the important issues for energy efficiency and future grid systems. Energy management is defined as a HEM (home energy management) on the residential consumer side. The HEM system plays a key role in residential demand response applications. In this study, a new HEM algorithm is proposed for smart home environments to reduce peak demand and increase the energy efficiency. The proposed algorithm includes VC (voltage control) methodology to reduce the power consumption of residential appliances so that the shifting of appliances is minimized. The results of the survey are used to produce representative load profiles for a weekday and for a weekend. Then, case studies are completed to test the proposed HEM algorithm in reducing the peak demand in the house. The main aim of the proposed HEM algorithm is to minimize the number of turned-off appliances to decrease demand so that the customer comfort is maximized. The smart home laboratory at Yildiz Technical University, Istanbul, Turkey is used in case studies. Experimental results show that the proposed HEM algorithm reduces the peak demand by 17.5% with the voltage control and by 38% with both the voltage control and the appliance shifting. - Highlights: • A new HEM (home energy management) algorithm is proposed. • Voltage control in the HEM is introduced as a solution for peak load reduction. • Customer comfort is maximized by minimizing the number of turned-off appliances. • The proposed HEM algorithm is experimentally validated at a smart home laboratory. • A survey is completed to produce typical load profiles of a Turkish family.

  7. Home networking architecture for IPv6

    OpenAIRE

    Arkko, Jari; Weil, Jason; Troan, Ole; Brandt, Anders

    2012-01-01

    This text describes evolving networking technology within increasingly large residential home networks. The goal of this document is to define an architecture for IPv6-based home networking while describing the associated principles, considerations and requirements. The text briefly highlights the specific implications of the introduction of IPv6 for home networking, discusses the elements of the architecture, and suggests how standard IPv6 mechanisms and addressing can be employed in home ne...

  8. Creating an International Network of Democracy Builders | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Creating an International Network of Democracy Builders. The Centre for the Study of Democracy (CSD) at Queen's University will conduct three case studies on democratic transition in Liberia, Costa Rica and Palestine, partnering with the Sua Foundation, the Arias Foundation and the Arab Thought Forum, respectively.

  9. Development and application of CATIA-GDML geometry builder

    International Nuclear Information System (INIS)

    Belogurov, S; Chernogorov, A; Ovcharenko, E; Schetinin, V; Berchun, Yu; Malzacher, P

    2014-01-01

    Due to conceptual difference between geometry descriptions in Computer-Aided Design (CAD) systems and particle transport Monte Carlo (MC) codes direct conversion of detector geometry in either direction is not feasible. The paper presents an update on functionality and application practice of the CATIA-GDML geometry builder first introduced at CHEP2010. This set of CATIAv5 tools has been developed for building a MC optimized GEANT4/ROOT compatible geometry based on the existing CAD model. The model can be exported via Geometry Description Markup Language (GDML). The builder allows also import and visualization of GEANT4/ROOT geometries in CATIA. The structure of a GDML file, including replicated volumes, volume assemblies and variables, is mapped into a part specification tree. A dedicated file template, a wide range of primitives, tools for measurement and implicit calculation of parameters, different types of multiple volume instantiation, mirroring, positioning and quality check have been implemented. Several use cases are discussed.

  10. Residential fencing in a metropolitan area and three small towns.

    Science.gov (United States)

    Edwin Kallio; Jerry A. Sesco

    1967-01-01

    Many types of fences were found on residential lots in the metropolitan-suburban area of St. Louis County, Missouri, and three small towns in southern Illinois. Wire fences predominated. More wooden fences were found on village lots than on city lots. In general, the more expensive homes had the most wooden fencing. Homes over 5 years old had more fencing of all...

  11. Estimating U.S. residential demand for fuelwood in the presence of selectivity

    Science.gov (United States)

    Daly, Ryan Michael

    Residential energy consumers have options for home heating. With many applications, appliances, and fuel types, fuelwood used for heating faces stiff competition in modern society from other fuels. This study estimates demand for domestic fuelwood. It also examines whether evidence of bias exists from residential homes choosing to use fuelwood. The use of OLS as an estimator will yield biased results if such selectivity exists. Selectivity is addressed with a Heckman (1979) two-step procedure; bias in fuelwood demand estimation using OLS is reduced. Non-wood energy prices and income are major determinants of fuelwood demand. Geographical regions and urbanization confirm results from prior studies.

  12. Personalized Home-Networks

    DEFF Research Database (Denmark)

    Soler, José; Gandy, Michael

    2007-01-01

    The paper provides details of a home-networking architecture based on an enhanced residential gateway. Initially the need for mechanisms allowing user-dependent network behavior is described and afterwards details of an initial implementation are provided in terms of architectural description...

  13. Valuing Residential Energy Efficiency in Two Alaska Real Estate Markets: A Hedonic Approach

    Science.gov (United States)

    Pride, Dominique J.

    Alaska households have high home energy consumption and expenditures. Improving the energy efficiency of the housing stock can reduce home energy consumption, thereby reducing home energy expenditures and CO2 emissions. Improving the energy efficiency of a home may also increase its transaction price if the energy efficiency improvements are capitalized into the value of the home. The relationship between energy efficiency and transaction prices in the Fairbanks and Anchorage, Alaska residential real estate markets is examined. Using a hedonic pricing framework and difference-in-differences analysis, the impact of the Alaska Home Energy Rebate program on the transaction prices of single-family homes in the Fairbanks and Anchorage housing markets from 2008 through 2015 is examined. The results indicate that compared to homes that did not complete the program, homes that completed the program sell for a statistically significant price premium between 15.1% and 15.5% in the Fairbanks market and between 5% and 11% in the Anchorage market. A hedonic pricing framework is used to relate energy efficiency ratings and transaction prices of homes in the Fairbanks and Anchorage residential real estate markets from 2008 through 2015. The results indicate that homes with above-average energy efficiency ratings sell for a statistically significant price premium between 6.9% and 17.5% in the Fairbanks market and between 1.8% and 6.0% in the Anchorage market.

  14. Insider Peace Builders in Societies in Transition | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Where there are peace agreements and political settlements in place (Aceh and Nepal), implementation processes have been ... the role of insider peace builders during the post-war political settlement phase and how they can help prevent future conflict. ... Bringing Women's Voices into the Mainstream: A Media Research ...

  15. Residential Energy Use and Conservation. Economics, Demographics, and Standards

    Energy Technology Data Exchange (ETDEWEB)

    Brounen, D. [Department of Financial Management, Erasmus University Rotterdam, Rotterdam (Netherlands); Kok, N. [Limburg Institute of Financial Economics LIFE, Maastricht University, Maastricht (Netherlands); Quigley, J.M. [Department of Economics, University of California, Berkeley, CA (United States)

    2011-03-15

    Energy consumption in the residential sector offers an important opportunity for conserving resources. However, much of the current debate regarding energy efficiency in the housing market focuses on the physical and technical determinants of energy consumption, neglecting the role of the economic behavior of resident households. In this paper, we analyze the extent to which the use of gas and electricity is determined by the technical specifications of the dwelling as compared to the demographic characteristics of the occupying household, using a unique set of microeconomic data for a sample of more than 300,000 Dutch homes. The results show that residential gas consumption is determined principally by structural dwelling characteristics, such as the vintage, building type and quality of the home, while electricity consumption varies more directly with household composition, in particular income and family composition. Combining these results with projections on future economic and demographic trends, we find that, absent price increases for residential energy, the aging of the population and their increasing wealth will mostly offset improvements in the energy efficiency of the building stock resulting from policy interventions and natural revitalization.

  16. VOLTTRON-Based System for Providing Ancillary Services with Residential Building Loads

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Xin

    2016-07-01

    -based interfaces, manufacturer-provided application programming interfaces, and proprietary communication interfaces. We document the ability to manage nine appliances, using four different standards or proprietary communication methods. A hardware-in-the-loop test was performed in a laboratory environment where the loads of a laboratory home and a large number of simulated homes are controlled by an aggregator. Upon receipt of an AGC signal, the VOLTTRON home energy management system (HEMS) of the laboratory home adjusts the end-device controls based on the comfort criteria set by the end users and sends telemetry to the aggregator to verify response. The aggregator then sends the AGC signal to other simulated homes in attempts to match the utility request as closely as possible. Frequency regulation is generally considered a higher value service than other ancillary services but it is also more challenging due to the constraint of short response time. A frequency regulation use case has been implemented with the regulation signals sent every 10 seconds. Experimental results indicate that the VOLTTRON-controlled residential loads are able to be controlled with sufficient fidelity to enable an aggregator to meet frequency regulation requirements. Future work is warranted, such as understanding the impact of this type of control on equipment life, and market requirements needed to open up residential loads to ancillary service aggregators.

  17. New Market Paradigm for Zero-Energy Homes: The Comparative San Diego Case Study; Volume 1 and Volume 2 (Appendixes)

    Energy Technology Data Exchange (ETDEWEB)

    Farhar, B. C.; Coburn, T. C.

    2006-12-01

    This study suggests a conceptually fresh alternative paradigm for the building and marketing of zero-energy homes (ZEHs) based on experience which will help builders create sustainable communities for our well-being and that of future generations.

  18. Performance and Costs of Ductless Heat Pumps in Marine-Climate High-Performance Homes -- Habitat for Humanity The Woods

    Energy Technology Data Exchange (ETDEWEB)

    Lubliner, Michael [Washington State Univ., Pullman, WA (United States); Howard, Luke [Washington State Univ., Pullman, WA (United States); Hales, David [Washington State Univ., Pullman, WA (United States); Kunkle, Rick [Washington State Univ., Pullman, WA (United States); Gordon, Andy [Washington State Univ., Pullman, WA (United States); Spencer, Melinda [Washington State Univ., Pullman, WA (United States)

    2016-02-23

    This final Building America Partnership report focuses on the results of field testing, modeling, and monitoring of ductless mini-split heat pump hybrid heating systems in seven homes built and first occupied at various times between September 2013 and October 2014. The report also provides WSU documentation of high-performance home observations, lessons learned, and stakeholder recommendations for builders of affordable high-performance housing.

  19. The Comfortable Home and Energy Consumption

    DEFF Research Database (Denmark)

    Madsen, Line Valdorff

    2017-01-01

    This paper investigates relations between notions of comfort and notions of home, aiming at a better understanding of residential comfort and the related energy consumption. Residential comfort is examined through a practice-theoretical lens and as something that appears in between the social...... and material structures of a home. The approach considers different elements of comfort in homemaking practices, such as the body, materials and social meanings. The paper examines how conceptions of comfort and homeliness interrelate through homemaking practices and thereby redefine comfort within a framework...... of the home and social practices. This implies focus on “the comfortable home” as made up of homemaking practices that include knowhow, sensations and social norms. The empirical basis comprises interviews and visual data from a field study on detached housing on the outskirts of a Danish city. The paper...

  20. Michigan residential heating oil and propane price survey: 1995-1996 heating season. Final report

    International Nuclear Information System (INIS)

    Moriarty, C.

    1996-05-01

    This report summarizes the results of a survey of residential No. 2 distillate fuel (home heating oil) and liquefied petroleum gas (propane) prices over the 1995--1996 heating season in Michigan. The Michigan's Public Service Commission (MPSC) conducted the survey under a cooperative agreement with the US Department of Energy's (DOE) Energy Information Administration (EIA). This survey was funded in part by a grant from the DOE. From October 1995 through March 1996, the MPSC surveyed participating distributors by telephone for current residential retail home heating oil and propane prices. The MPSC transmitted the data via a computer modem to the EIA using the Petroleum Electronic Data Reporting Option (PEDRO). Survey results were published in aggregate on the MPSC World Wide Web site at http://ermisweb.state.mi.us/shopp. The page was updated with both residential and wholesale prices immediately following the transmission of the data to the EIA. The EIA constructed the survey using a sample of Michigan home heating oil and propane retailers. The sample accounts for different sales volumes, geographic location, and sources of primary supply

  1. Managing Austerity: Emotional Containment in a Residential Children’s Home Under Threat

    OpenAIRE

    Melaugh, Brian

    2016-01-01

    The aim of the study was to explore the process and practice of leading change in residential child care and assess the efficacy of ‘emotional containment’ in this context. Residential child care in Ireland is experiencing significant change. Change is an emotional experience for staff and leadership is named as pivotal in organisational change. However, there is gap in the literature because leadership and organisational change theory does not fully fit with the relational nature of resident...

  2. 76 FR 19466 - Masco Builder Cabinet Group Including On-Site Leased Workers From Reserves Network, Reliable...

    Science.gov (United States)

    2011-04-07

    ... Builder Cabinet Group Including On-Site Leased Workers From Reserves Network, Reliable Staffing, and Third Dimension Waverly, OH; Masco Builder Cabinet Group Including On-Site Leased Workers From Reserves Network... Group including on-site leased workers from Reserves Network, Jackson, Ohio. The workers produce...

  3. Polyol and Amino Acid-Based Biosurfactants, Builders, and Hydrogels

    Science.gov (United States)

    This chapter reviews different detergent materials which have been synthesized from natural agricultural commodities. Background information, which gives reasons why the use of biobased materials may be advantageous, is presented. Detergent builders from L-aspartic acid, citric acid and D-sorbitol...

  4. Impact of Uncoordinated Plug-in Electric Vehicle Charging on Residential Power Demand

    Energy Technology Data Exchange (ETDEWEB)

    Muratori, Matteo [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2018-01-22

    Electrification of transport offers opportunities to increase energy security, reduce carbon emissions, and improve local air quality. Plug-in electric vehicles (PEVs) are creating new connections between the transportation and electric sectors, and PEV charging will create opportunities and challenges in a system of growing complexity. Here, I use highly resolved models of residential power demand and PEV use to assess the impact of uncoordinated in-home PEV charging on residential power demand. While the increase in aggregate demand might be minimal even for high levels of PEV adoption, uncoordinated PEV charging could significantly change the shape of the aggregate residential demand, with impacts for electricity infrastructure, even at low adoption levels. Clustering effects in vehicle adoption at the local level might lead to high PEV concentrations even if overall adoption remains low, significantly increasing peak demand and requiring upgrades to the electricity distribution infrastructure. This effect is exacerbated when adopting higher in-home power charging.

  5. Impact of uncoordinated plug-in electric vehicle charging on residential power demand

    Science.gov (United States)

    Muratori, Matteo

    2018-03-01

    Electrification of transport offers opportunities to increase energy security, reduce carbon emissions, and improve local air quality. Plug-in electric vehicles (PEVs) are creating new connections between the transportation and electric sectors, and PEV charging will create opportunities and challenges in a system of growing complexity. Here, I use highly resolved models of residential power demand and PEV use to assess the impact of uncoordinated in-home PEV charging on residential power demand. While the increase in aggregate demand might be minimal even for high levels of PEV adoption, uncoordinated PEV charging could significantly change the shape of the aggregate residential demand, with impacts for electricity infrastructure, even at low adoption levels. Clustering effects in vehicle adoption at the local level might lead to high PEV concentrations even if overall adoption remains low, significantly increasing peak demand and requiring upgrades to the electricity distribution infrastructure. This effect is exacerbated when adopting higher in-home power charging.

  6. Modular Energy Management System Applicable to Residential Microgrids

    DEFF Research Database (Denmark)

    Hernández, Adriana Carolina Luna; Aldana, Nelson Leonardo Diaz; Graells, Moises

    2016-01-01

    In this paper, an energy management system is defined as a flexible architecture. This proposal can be applied to home and residential areas when they include generation units. The system has been integrated and tested in a grid-connected microgrid prototype, where optimal power generation profiles...

  7. Residential characteristics and household risk factors and respiratory diseases in Chinese women: The Seven Northeast Cities (SNEC) Study

    Energy Technology Data Exchange (ETDEWEB)

    Dong, Guang-Hui [Department of Biostatistics and Epidemiology, School of Public Health, China Medical University, Shenyang, Liaoning Province 110001 (China); Department of Occupational and Environmental Health, School of Public Health, China Medical University, Shenyang, Liaoning Province 110001 (China); Qian, Zhengmin, E-mail: zqian2@slu.edu [Department of Epidemiology, School of Public Health, Saint Louis University, Saint Louis, MO 63104 (United States); Wang, Jing [Department of Biostatistics, School of Public Health, Saint Louis University, Saint Louis, MO 63104 (United States); Trevathan, Edwin [Department of Epidemiology, School of Public Health, Saint Louis University, Saint Louis, MO 63104 (United States); Ma, Wenjun [Guangdong Provincial Institute of Public Health, Guangdong Provincial Center for Disease Control and Prevention, Guangzhou, Guangdong Province 510300 (China); Chen, Weiqing [Department of Epidemiology, School of Public Health, Sun Yat-sen University, Guangzhou 510080 (China); Xaverius, Pamela K.; Buckner-Petty, Skye; Ray, Asheesh [Department of Epidemiology, School of Public Health, Saint Louis University, Saint Louis, MO 63104 (United States); Liu, Miao-Miao; Wang, Da [Department of Biostatistics and Epidemiology, School of Public Health, China Medical University, Shenyang, Liaoning Province 110001 (China); Ren, Wan-Hui [Department of Ambient Air Pollution Monitor, Shenyang Environmental Monitoring Center, Shenyang, Liaoning Province 110014 (China); Emo, Brett [Department of Environmental and Occupational Health School of Public Health, Saint Louis University, Saint Louis, MO 63104 (United States); Chang, Jen-Jen [Department of Epidemiology, School of Public Health, Saint Louis University, Saint Louis, MO 63104 (United States)

    2013-10-01

    Background: Few studies have assessed the impact of residential home characteristics and home environmental risk factors on respiratory diseases in Chinese women. Therefore, this study sought to determine the association between residential home features, domestic pets, home renovation and other indoor environmental risk factors with respiratory health outcomes of Chinese women. Methods: This cross-sectional study included a study sample of 30,780 Chinese women aged 23 to 49 from 25 districts of seven cities in Liaoning Province, Northeast China. Information on respiratory health, residential characteristics, and indoor air pollution sources was obtained by a standard questionnaire from the American Thoracic Society. Multivariable logistic regression was used to estimate prevalence odds ratios (POR) and 95% confidence interval (95%CI). Results: The odds of respiratory diseases were higher for those who lived near the main road, or near ambient air pollution sources. Pet-keeping was associated with increased odds of chronic bronchitis (POR = 1.40; 95%CI: 1.09–1.81) and doctor-diagnosed asthma (POR = 2.07; 95%CI: 1.18–3.64). Additionally, humidifier use was associated with increased odds of chronic bronchitis (POR = 1.44; 95%CI: 1.07–1.94). Home renovation in recent 2 years was associated with increased likelihood of allergic rhinitis (POR = 1.39; 95%CI 1.17–1.64). Conclusion: Home renovation and residential home environmental risk factors were associated with an increased likelihood of respiratory morbidity among Chinese women. - Highlights: • Relatively few significant associations were observed. • Pet ownership was associated with increased odds of asthma and chronic bronchitis. • Home renovation was associated with increased odds of allergic rhinitis in women. • Humidifier use was associated with increased odds of chronic bronchitis in women.

  8. Residential characteristics and household risk factors and respiratory diseases in Chinese women: The Seven Northeast Cities (SNEC) Study

    International Nuclear Information System (INIS)

    Dong, Guang-Hui; Qian, Zhengmin; Wang, Jing; Trevathan, Edwin; Ma, Wenjun; Chen, Weiqing; Xaverius, Pamela K.; Buckner-Petty, Skye; Ray, Asheesh; Liu, Miao-Miao; Wang, Da; Ren, Wan-Hui; Emo, Brett; Chang, Jen-Jen

    2013-01-01

    Background: Few studies have assessed the impact of residential home characteristics and home environmental risk factors on respiratory diseases in Chinese women. Therefore, this study sought to determine the association between residential home features, domestic pets, home renovation and other indoor environmental risk factors with respiratory health outcomes of Chinese women. Methods: This cross-sectional study included a study sample of 30,780 Chinese women aged 23 to 49 from 25 districts of seven cities in Liaoning Province, Northeast China. Information on respiratory health, residential characteristics, and indoor air pollution sources was obtained by a standard questionnaire from the American Thoracic Society. Multivariable logistic regression was used to estimate prevalence odds ratios (POR) and 95% confidence interval (95%CI). Results: The odds of respiratory diseases were higher for those who lived near the main road, or near ambient air pollution sources. Pet-keeping was associated with increased odds of chronic bronchitis (POR = 1.40; 95%CI: 1.09–1.81) and doctor-diagnosed asthma (POR = 2.07; 95%CI: 1.18–3.64). Additionally, humidifier use was associated with increased odds of chronic bronchitis (POR = 1.44; 95%CI: 1.07–1.94). Home renovation in recent 2 years was associated with increased likelihood of allergic rhinitis (POR = 1.39; 95%CI 1.17–1.64). Conclusion: Home renovation and residential home environmental risk factors were associated with an increased likelihood of respiratory morbidity among Chinese women. - Highlights: • Relatively few significant associations were observed. • Pet ownership was associated with increased odds of asthma and chronic bronchitis. • Home renovation was associated with increased odds of allergic rhinitis in women. • Humidifier use was associated with increased odds of chronic bronchitis in women

  9. Residential neighbourhoods in Kathmandu: Key design guidelines

    Directory of Open Access Journals (Sweden)

    Bijaya K. Shrestha

    2013-01-01

    Full Text Available Residential neighbourhoods developed using various techniques in Kathmandu by both the public and private sectors have not only provided a poor urban setting and failed to address socio-cultural needs, but are also poor at building a community and creating links to the built environment, with the result that the planned areas lack a sense of place and the inhabitants lack a feeling of home. Although traditional neighbourhoods in the historic core area had many features of a good residential neighbourhood in the past, they are currently undergoing rapid destruction. The residents of these neighbourhoods have little awareness of these issues. The existing legal and institutional frameworks are inadequate and ineffective and cannot address these problems, and so the formulation of design guidelines, their strict implementation, and enhancement of socio-cultural events including social networking are recommended for future residential neighbourhood development.

  10. DOE Zero Energy Ready Home Case Study: Ithaca Neighborhood Housing Services, Ithaca, New York

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-10-01

    Eleven new townhomes comply with EPA's airPLUS criteria and use EPA WaterSense-qualifying features. Foundation walls are insulated on the exterior with XPS insulation. Non-shared walls use wall panels that were produced offsite. This builder was awarded a 2013 Housing Innovation Award in the affordable home category.

  11. The CMS event builder demonstrator and results with Myrinet

    CERN Document Server

    Antchev, G; Cittolin, Sergio; Erhan, S; Faure, B; Gigi, D; Gutleber, J; Jacobs, C; Meijers, F; Meschi, E; Ninane, A; Orsini, L; Pollet, Lucien; Rácz, A; Samyn, D; Schleifer, W; Sinanis, N; Sphicas, Paris

    2001-01-01

    The data acquisition system for the CMS experiment at the Large Hadron Collider (LHC) will require a large and high performance event building network. Several switch technologies are currently being evaluated in order to compare different architectures for the event builder. One candidate is Myrinet. This paper describes the demonstrator which has been setup to study a small-scale (16*16) event builder based on PCs running Linux connected to Myrinet and Ethernet switches. A detailed study of the Myrinet switch performance has been performed for various traffic conditions, including the behaviour of composite switches. Results from event building studies are presented, including measurements on throughput, overhead and scaling. Traffic shaping techniques have been implemented and the effect on the event building performance has been investigated. The paper reports on performances and maximum event rate obtainable using custom software, not described, for the Myrinet control program and the low-level communica...

  12. 46 CFR 308.409 - Standard form of War Risk Builder's Risk Insurance Policy, Form MA-283.

    Science.gov (United States)

    2010-10-01

    ... Policy, Form MA-283. 308.409 Section 308.409 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF... of War Risk Builder's Risk Insurance Policy, Form MA-283. The standard form of War Risk Builder's Risk Insurance Policy, Form MA-283 may be obtained from the American War Risk Agency or MARAD. ...

  13. Prediction of greenhouse gas reduction potential in Japanese residential sector by residential energy end-use model

    International Nuclear Information System (INIS)

    Shimoda, Yoshiyuki; Yamaguchi, Yukio; Okamura, Tomo; Taniguchi, Ayako; Yamaguchi, Yohei

    2010-01-01

    A model is developed that simulates nationwide energy consumption of the residential sector by considering the diversity of household and building types. Since this model can simulate the energy consumption for each household and building category by dynamic energy use based on the schedule of the occupants' activities and a heating and cooling load calculation model, various kinds of energy-saving policies can be evaluated with considerable accuracy. In addition, the average energy efficiency of major electric appliances used in the residential sector and the percentages of housing insulation levels of existing houses is predicted by the 'stock transition model.' In this paper, energy consumption and CO 2 emissions in the Japanese residential sector until 2025 are predicted. For example, as a business - as-usual (BAU) case, CO 2 emissions will be reduced by 7% from the 1990 level. Also evaluated are mitigation measures such as the energy efficiency standard for home electric appliances, thermal insulation code, reduction of standby power, high-efficiency water heaters, energy-efficient behavior of occupants, and dissemination of photovoltaic panels.

  14. Cross platform SCA component using C++ builder and KYLIX

    International Nuclear Information System (INIS)

    Nishimura, Hiroshi; Timossi, Chiris; McDonald, James L.

    2003-01-01

    A cross-platform component for EPICS Simple Channel Access (SCA) has been developed. EPICS client programs with GUI become portable at their C++ source-code level both on Windows and Linux by using Borland C++ Builder 6 and Kylix 3 on these platforms respectively

  15. Optimization scheduling in intelligent Energy Management System for the DC residential distribution system

    DEFF Research Database (Denmark)

    Yue, Jingpeng; Hu, Zhijian; Li, Chendan

    2017-01-01

    Smart DC residential distribution system(RDS) consisted by DC living homes will be a significant integral part in the future green transmission with demand flexibility. Meanwhile, the distributed generations will play an important role in the active demand response (DR). Energy Management System...... (EMS) with aid of the wireless communication and the smart meter is imperative in achieving ADR for DC residential community. This paper presents a framework of centralized management system integration and the key process of ADR in DC residential distribution system. The propose framework and methods...

  16. DOE Zero Energy Ready Home Case Study: Southeast Volusia Habitat for Humanity, Edgewater, FL

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-09-01

    This home garnered an award in the Affordable Builder category of the 2014 Housing Innovation Awards, and features 2x4 walls with fiberglass batt inside plus R-3 rigid foam on the exterior, ENERGY STAR lighting, appliances, and ceiling fans, a solar water heater, an energy recovery ventilation, and a high efficiency heat pump.

  17. Estimation of urban residential electricity demand in China using household survey data

    International Nuclear Information System (INIS)

    Zhou, Shaojie; Teng, Fei

    2013-01-01

    This paper uses annual urban household survey data of Sichuan Province from 2007 to 2009 to estimate the income and price elasticities of residential electricity demand, along with the effects of lifestyle-related variables. The empirical results show that in the urban area of Sichuan province, the residential electricity demand is price- and income-inelastic, with price and income elasticities ranging from −0.35 to −0.50 and from 0.14 to 0.33, respectively. Such lifestyle-related variables as demographic variables, dwelling size and holdings of home appliances, are also important determinants of residential electricity demand, especially the latter. These results are robust to a variety of sensitivity tests. The research findings imply that urban residential electricity demand continues to increase with the growth of income. The empirical results have important policy implications for the Multistep Electricity Price, which been adopted in some cities and is expected to be promoted nationwide through the installation of energy-efficient home appliances. - Highlights: • We estimate price and income elasticities in China using household survey data. • The current study is the first such study in China at this level. • Both price and income are inelastic. • Behavior factors have important impact on electricity consumption

  18. nmsBuilder: Freeware to create subject-specific musculoskeletal models for OpenSim.

    Science.gov (United States)

    Valente, Giordano; Crimi, Gianluigi; Vanella, Nicola; Schileo, Enrico; Taddei, Fulvia

    2017-12-01

    Musculoskeletal modeling and simulations of movement have been increasingly used in orthopedic and neurological scenarios, with increased attention to subject-specific applications. In general, musculoskeletal modeling applications have been facilitated by the development of dedicated software tools; however, subject-specific studies have been limited also by time-consuming modeling workflows and high skilled expertise required. In addition, no reference tools exist to standardize the process of musculoskeletal model creation and make it more efficient. Here we present a freely available software application, nmsBuilder 2.0, to create musculoskeletal models in the file format of OpenSim, a widely-used open-source platform for musculoskeletal modeling and simulation. nmsBuilder 2.0 is the result of a major refactoring of a previous implementation that moved a first step toward an efficient workflow for subject-specific model creation. nmsBuilder includes a graphical user interface that provides access to all functionalities, based on a framework for computer-aided medicine written in C++. The operations implemented can be used in a workflow to create OpenSim musculoskeletal models from 3D surfaces. A first step includes data processing to create supporting objects necessary to create models, e.g. surfaces, anatomical landmarks, reference systems; and a second step includes the creation of OpenSim objects, e.g. bodies, joints, muscles, and the corresponding model. We present a case study using nmsBuilder 2.0: the creation of an MRI-based musculoskeletal model of the lower limb. The model included four rigid bodies, five degrees of freedom and 43 musculotendon actuators, and was created from 3D surfaces of the segmented images of a healthy subject through the modeling workflow implemented in the software application. We have presented nmsBuilder 2.0 for the creation of musculoskeletal OpenSim models from image-based data, and made it freely available via nmsbuilder

  19. Exploring the critical quality attributes and models of smart homes.

    Science.gov (United States)

    Ted Luor, Tainyi; Lu, Hsi-Peng; Yu, Hueiju; Lu, Yinshiu

    2015-12-01

    Research on smart homes has significantly increased in recent years owing to their considerably improved affordability and simplicity. However, the challenge is that people have different needs (or attitudes toward smart homes), and provision should be tailored to individuals. A few studies have classified the functions of smart homes. Therefore, the Kano model is first adopted as a theoretical base to explore whether the functional classifications of smart homes are attractive or necessary, or both. Second, three models and test user attitudes toward three function types of smart homes are proposed. Based on the Kano model, the principal results, namely, two "Attractive Quality" and nine "Indifferent Quality" items, are found. Verification of the hypotheses also indicates that the entertainment, security, and automation functions are significantly correlated with the variables "perceive useful" and "attitude." Cost consideration is negatively correlated with attitudes toward entertainment and automation. Results suggest that smart home providers should survey user needs for their product instead of merely producing smart homes based on the design of the builder or engineer. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  20. Different sizes, similar challenges: Out of home care for youth in Germany and the Netherlands

    Directory of Open Access Journals (Sweden)

    Annemiek T. Harder

    2014-03-01

    Full Text Available While there is a large difference in the number of young inhabitants in the Netherlands and Germany, their child protection frameworks are quite similar. In both countries, child protection services are mainlyfocused on youth aged 0 to 18 and regulations are aimed at clients' responsibility and their active involvement during care. Youth care services consist of community-based services, day treatment and outof-home care services, which include foster care and residential care. The history of out-of-home care services in both countries is characterized by similar developments. Over the last four decades, similar trends in residential care, towards more small-scale forms of residential care, smaller residential group sizes, and increasing professionalization of staff have emerged. Over the last two decades, a comparable trend towards increasing professionalization can be seen in the context of foster care in both countries. In addition, the number of youths in out-of-home care increased in both countries over the last decade, specifically in foster care. Over the last decade, more studies have been conducted in residential care than in foster care in both countries. Despite similar trends and developments in out-of-home care practice, research mainly shows differences in applied topics and methods between Germany and the Netherlands.

  1. The Newnes guide to home electrics

    CERN Document Server

    Burdett, Geoffrey

    2013-01-01

    Home Electrics, Second Edition provides a do-it-yourself (DIY) guide to residential electric systems. The book is comprised of 15 chapters that cover the different aspects of home electrics. The topics covered in the text include electrical installation, rewiring, power circuits, electrical hardware, electrical repairs, tools, and safety. The book also discusses a specific area or function of home electronics, such as lighting system, lamps, electric cookers, and outdoor electrical extension. The book will be of great use to individuals interested in learning how to conduct proper home electri

  2. Construction practices: Pulse builder survey results

    Energy Technology Data Exchange (ETDEWEB)

    Kadulski, R

    This paper discusses the results of a nationwide builder survey on common building techniques, such as framing, insulation, airtight construction practices, testing for airtightness, windows, furnaces and water heaters, and ventilation. Results indicate that changes in construction were mainly influenced by the R-2000 program. The spread of R-2000 technology is reflected in the use of higher insulation levels than are called for by codes or than is normal practice, sealing of joints, and attention to air and vapour retarders as well as air tight drywall techniques combined with mechanical ventilation systems.

  3. Evidence-based practice guidelines for prescribing home modifications for clients with bariatric care needs.

    Science.gov (United States)

    de Lange, Laura; Coyle, Emma; Todd, Helen; Williams, Cylie

    2018-04-01

    Home modifications maintain people's functional independence and safety. No literature exists to guide the prescription of home modifications for clients with bariatric care needs. With Australia's increasing obesity rate, more evidence is needed to support home modification prescribers. This study aimed to map Australian home modification prescribing practices for clients with bariatric care needs and to establish and evaluate a clinical resource for this prescription process. The study included two phases. Phase 1 conducted a cross-sectional survey of therapists practicing in Australia, and Australian industry partners who prescribe or install home modifications for clients with bariatric care needs. Phase 2 included design, implementation and evaluation of a clinical resource. Data were analysed with means and frequencies; multivariable regression analysis was used to explore prescribing habits. Therapists surveyed (n = 347) reported 11 different bariatric weight definitions. Less than 3% constantly or regularly prescribed home modifications for these clients; rails were most commonly prescribed. Many therapists (n = 171, 58%) 'never' or 'rarely' knew rail load capacity. Therapists' knowledge of rail load capacity was associated with previous experience prescribing home modifications (P = 0.009); rail manufacturer's advice (P = 0.016) and not using advice from builders (P = 0.001). Clinical resources were used by 11% (n = 26) of therapists to support their prescription, and industry sporadically relied on therapists to specify modification design requirements (n = 5, 45%). Post-implementation of a clinical resource increased consensus regarding understanding of the term bariatric and increased consultation with builders and manufacturers. There was a lack of consistency in bariatric terminology, uncertainty of rail load capacities and minimal use of clinical practice guidelines. Additional resources will assist with consistency in prescribing

  4. [Imhotep--builder, physician, god].

    Science.gov (United States)

    Mikić, Zelimir

    2008-01-01

    The medicine had been practiced in ancient Egypt since the earliest, prehistoric days, many millenia before Christ, and was quite developed in later periods. This is evident from the sceletal findings, surgical instruments found in tombs, wall printings, the reliefs and inscriptions, and most of all, from the sparse written material known as medical papyri. However, there were not many physicians from that time whose names had been recorded. The earliest physician in ancient Egypt known by name was Imhotep. WHO WAS IMHOTEP?: Imhotep lived and worked during the time of the 3rd Dynasty of Old Kingdom and served under the pharaoh Djoser (reigned 2667-2648 BC) as his vizier or chief minister, high priest, chief builder and carpenter. He obviously was an Egyptian polymath, a learned man and scribe and was credited with many inventions. As one of the highest officials of the pharaoh Djoser Imhotep is credited with designing and building of the famous Step Pyramid of Djoser at Saqqarah, near the old Egyptian capital of Memphis. Imhotep is also credited with inventing the method of stone-dressed building and using of columns in architecture and is considered to be the first architect in history known by name. It is believed that, as the high priest, Imhotel also served as the nation's chief physician in his time. As the builder of the Step Pyramid, and as a physician, he also had to take medical care of thousands of workers engaged in that great project. He is also credited with being the founder of Egyptian medicine and with being the author of the so-called Smith papirus containing a collection of 48 specimen clinical records with detailed accurate record of the features and treatment of various injuries. As such he emerges as the first physician of ancient Egypt known by name and, at the same time, as the first physician known by name in written history of the world. GOD: As Imhotep was considered by Egyptian people as the "inventor of healing", soon after the death, he

  5. Residential Transitions among Adults with Intellectual Disability across 20 Years

    Science.gov (United States)

    Woodman, Ashley C.; Mailick, Marsha R.; Anderson, Kristy A.; Esbensen, Anna J.

    2014-01-01

    The present study addresses critical gaps in the literature by examining residential transitions among 303 adults with intellectual disability over 10 years (Part 1) and 75 adults with Down syndrome over 20 years (Part 2). All adults lived at home at the start of the study, but many moved to a variety of settings. Several characteristics of the adults with intellectual disability differed across settings, most notably adaptive behavior and the number of residential transitions, while characteristics such as age, type of disability, and behavior problems were less predictive of residential placements. The number of moves over the course of the study varied widely, with critical links to earlier family dynamics, social relationships, and health and adaptive behavior. PMID:25354121

  6. An Analysis of the Effects of Photovoltaic Energy Systems on Residential Selling Prices in California.

    Energy Technology Data Exchange (ETDEWEB)

    Cappers, Peter; Wiser, Ryan; Thayer, Mark; Hoen, Ben

    2011-04-12

    An increasing number of homes with existing photovoltaic (PV) energy systems have sold in the U.S., yet relatively little research exists that estimates the marginal impacts of those PV systems on the sales price. A clearer understanding of these effects might influence the decisions of homeowners, home buyers and PV home builders. This research analyzes a large dataset of California homes that sold from 2000 through mid-2009 with PV installed. Across a large number of hedonic and repeat sales model specifications and robustness tests, the analysis finds strong evidence that homes with PV systems sold for a premium over comparable homes without. The effects range, on average, from approximately $3.9 to $6.4 per installed watt (DC), with most models coalescing near $5.5/watt, which corresponds to a premium of approximately $17,000 for a 3,100 watt system. The research also shows that, as PV systems age, the premium enjoyed at the time of home sale decreases. Additionally, existing homes with PV systems are found to have commanded a larger sales price premium than new homes with similarly sized PV systems. Reasons for this discrepancy are suggested, yet further research is warranted in this area as well as a number of other areas that are highlighted.

  7. Residential indoor air quality guideline : ozone

    International Nuclear Information System (INIS)

    2010-01-01

    Ozone (O 3 ) is a colourless gas that reacts rapidly on surfaces and with other constituents in the air. Sources of indoor O 3 include devices sold as home air cleaners, and some types of office equipment. Outdoor O 3 is also an important contributor to indoor levels of O 3 , depending on the air exchange rate with indoor environments. This residential indoor air quality guideline examined factors that affect the introduction, dispersion and removal of O 3 indoors. The health effects of prolonged exposure to O 3 were discussed, and studies conducted to evaluate the population health impacts of O 3 were reviewed. The studies demonstrated that there is a significant association between ambient O 3 and adverse health impacts. Exposure guidelines for residential indoor air quality were discussed. 14 refs.

  8. The bottom line: an ethnography of for-profit elderly residential care

    OpenAIRE

    Greener, Joe

    2011-01-01

    In the last 20 years the UK’s elderly residential care system has become progressively more privatised with an increase in the number of for-profit organisations delivering these services. This study is a participant observation of care work in one privatised elderly residential care home (‘Meadowvale’), owned and operated by a large provider of such services (‘Moonlight Care’). It provides a rich ethnographic depiction of life at Meadowvale both from the point of view of the workers and the ...

  9. Forced residential mobility and social support: impacts on psychiatric disorders among Somali migrants

    Directory of Open Access Journals (Sweden)

    Bhui Kamaldeep

    2012-04-01

    Full Text Available Abstract Background Somali migrants fleeing the civil war in their country face punishing journeys, the loss of homes, possessions, and bereavement. On arrival in the host country they encounter poverty, hostility, and residential instability which may also undermine their mental health. Methods An in-depth and semi-structured interview was used to gather detailed accommodation histories for a five year period from 142 Somali migrants recruited in community venues and primary care. Post-codes were verified and geo-mapped to calculate characteristics of residential location including deprivation indices, the number of moves and the distances between residential moves. We asked about the reasons for changing accommodation, perceived discrimination, asylum status, traumatic experiences, social support, employment and demographic factors. These factors were assessed alongside characteristics of residential mobility as correlates of ICD-10 psychiatric disorders. Results Those who were forced to move homes were more likely to have an ICD-10 psychiatric disorder (OR = 2.64, 1.16-5.98, p = 0.02 compared with those moving through their own choice. A lower risk of psychiatric disorders was found for people with larger friendship networks (0.35, 0.14-0.84, p = 0.02, for those with more confiding emotional support (0.42, 0.18-1.0, p = 0.05, and for those who had not moved during the study period (OR = 0.21, 0.07-0.62, p = 0.01. Conclusions Forced residential mobility is a risk factor for psychiatric disorder; social support may contribute to resilience against psychiatric disorders associated with residential mobility.

  10. Scaling up the mining of semantically-enriched trajectories: TripBuilder at the world level

    OpenAIRE

    Brilhante, Igo; Macedo, Jose Antonio; Nardini, Franco Maria; Perego, Raffaele; Renso, Chiara

    2015-01-01

    TripBuilder is an unsupervised system helping tourists to build their own personalized sightseeing tour [1,3,2]. Given a target touristic city, the time available for the visit, and the tourist's profile, TripBuilder provides a time-budgeted tour that maximizes tourist's interests and takes into account both the time needed to enjoy the at- tractions and to move from one Point of Interest (PoI) to the next one. The knowledge base feeding the sightseeing tour generation algorithm of TripBuilde...

  11. Home management of malaria in an academic community ...

    African Journals Online (AJOL)

    Malaria remains one of the world\\'s most devastating diseases, killing millions of people yearly. Home management is an important strategy adopted for the reduction of its fatality. This survey to evaluate home management practices towards malaria among heads of households was undertaken at the residential quarters of ...

  12. Strategy Guideline. Partnering for High Performance Homes

    Energy Technology Data Exchange (ETDEWEB)

    Prahl, Duncan [IBACOS, Inc., Pittsburgh, PA (United States)

    2013-01-01

    High performance houses require a high degree of coordination and have significant interdependencies between various systems in order to perform properly, meet customer expectations, and minimize risks for the builder. Responsibility for the key performance attributes is shared across the project team and can be well coordinated through advanced partnering strategies. For high performance homes, traditional partnerships need to be matured to the next level and be expanded to all members of the project team including trades, suppliers, manufacturers, HERS raters, designers, architects, and building officials as appropriate. This guide is intended for use by all parties associated in the design and construction of high performance homes. It serves as a starting point and features initial tools and resources for teams to collaborate to continually improve the energy efficiency and durability of new houses.

  13. Infants delivered in maternity homes run by traditional birth attendants in urban Nigeria: a community-based study.

    Science.gov (United States)

    Olusanya, Bolajoko O; Inem, Victor A; Abosede, Olayinka A

    2011-06-01

    We explored factors associated with traditional maternity/herbal homes (TMHs) run by traditional birth attendants (TBAs) compared with hospital or home delivery in Lagos, Nigeria, and found that infants delivered at TMHs were less likely to have severe hyperbilirubinemia compared with infants delivered in hospitals or residential homes. These infants were also less likely to be preterm compared with those delivered in hospitals or undernourished compared with infants delivered in residential homes. We concluded that infants delivered at TMHs who survive are unlikely to be at greater risks of some adverse perinatal outcomes than those delivered in hospitals or family homes.

  14. Staff satisfaction and its components in residential aged care.

    Science.gov (United States)

    Chou, Shu-Chiung; Boldy, Duncan P; Lee, Andy H

    2002-06-01

    The purpose of this study was to assess the direction and magnitude of the effects among the components of staff satisfaction in residential aged care and to examine whether the relationships among satisfaction components vary according to facility type (i.e. nursing homes and hostels). A hostel is a low care facility in which residents are more independent, have a lower level of care needs, and receive personal but not nursing care. A cross-sectional survey design was adopted to collect the required information, and a stratified random sampling approach was utilized to select facilities. Structural equation modeling was used to examine relationships among satisfaction components. Seventy residential aged care facilities in Western Australia. The sample includes 610 nursing home and 373 hostel care staff. The relationships among satisfaction components are different for nursing home and hostel staff. Professional support is found to have a strong and positive effect on all other aspects of staff satisfaction. The findings lead to an improved understanding of the interrelationship among staff satisfaction components, which has important implications through enhancing professional support. This needs to be recognized and emphasized by managers, care providers, and policy makers so as to maintain stable personnel and continuity of care.

  15. Dynamic management of integrated residential energy systems

    Science.gov (United States)

    Muratori, Matteo

    dissertation presents a bottom-up highly resolved model of a generic residential energy eco-system in the United States. The model is able to capture the entire energy footprint of an individual household, to include all appliances, space conditioning systems, in-home charging of plug-in electric vehicles, and any other energy needs, viewing residential and transportation energy needs as an integrated continuum. The residential energy eco-system model is based on a novel bottom-up approach that quantifies consumer energy use behavior. The incorporation of stochastic consumer behaviors allows capturing the electricity consumption of each residential specific end-use, providing an accurate estimation of the actual amount of available controllable resources, and for a better understanding of the potential of residential demand response programs. A dynamic energy management framework is then proposed to manage electricity consumption inside each residential energy eco-system. Objective of the dynamic energy management framework is to optimize the scheduling of all the controllable appliances and in-home charging of plug-in electric vehicles to minimize cost. Such an automated energy management framework is used to simulate residential demand response programs, and evaluate their impact on the electric power infrastructure. For instance, time-varying electricity pricing might lead to synchronization of the individual residential demands, creating pronounced rebound peaks in the aggregate demand that are higher and steeper than the original demand peaks that the time-varying electricity pricing structure intended to eliminate. The modeling tools developed in this study can serve as a virtual laboratory for investigating fundamental economic and policy-related questions regarding the interplay of individual consumers with energy use. The models developed allow for evaluating the impact of different energy policies, technology adoption, and electricity price structures on the total

  16. Upgrade of the CMS Event Builder

    CERN Multimedia

    CERN. Geneva

    2012-01-01

    The Data Acquisition (DAQ) system of the Compact Muon Solenoid (CMS) experiment at CERN assembles events at a rate of 100 kHz, transporting event data at an aggregate throughput of 100 GB/s. By the time the LHC restarts after the 2013/14 shut-down, the current compute nodes and networking infrastructure will have reached the end of their lifetime. We are presenting design studies for an upgrade of the CMS event builder based on advanced networking technologies such as 10 Gb/s Ethernet. We report on tests and performance measurements with small-scale test setups.

  17. Modifiable factors related to abusive behaviors in nursing home residents with dementia

    NARCIS (Netherlands)

    Volicer, L.; Kampen, van J.T.; Frijters, D.H.M.

    2009-01-01

    OBJECTIVES: To determine modifiable factors related to abusive behaviors in nursing home residents with dementia. DESIGN: Analysis of Minimum Data Set (MDS) of the Resident Assessment Instrument (RAI) information. SETTING: We used MDS-RAI data from 8 Dutch nursing homes and 10 residential homes that

  18. MICRO-CHP System for Residential Applications

    Energy Technology Data Exchange (ETDEWEB)

    Joseph Gerstmann

    2009-01-31

    This is the final report of progress under Phase I of a project to develop and commercialize a micro-CHP system for residential applications that provides electrical power, heating, and cooling for the home. This is the first phase of a three-phase effort in which the residential micro-CHP system will be designed (Phase I), developed and tested in the laboratory (Phase II); and further developed and field tested (Phase III). The project team consists of Advanced Mechanical Technology, Inc. (AMTI), responsible for system design and integration; Marathon Engine Systems, Inc. (MES), responsible for design of the engine-generator subsystem; AO Smith, responsible for design of the thermal storage and water heating subsystems; Trane, a business of American Standard Companies, responsible for design of the HVAC subsystem; and AirXchange, Inc., responsible for design of the mechanical ventilation and dehumidification subsystem.

  19. Energy Impacts of Effective Range Hood Use for all U.S. Residential Cooking

    Energy Technology Data Exchange (ETDEWEB)

    Logue, Jennifer M; Singer, Brett

    2014-06-01

    Range hood use during residential cooking is essential to maintaining good indoor air quality. However, widespread use will impact the energy demand of the U.S. housing stock. This paper describes a modeling study to determine site energy, source energy, and consumer costs for comprehensive range hood use. To estimate the energy impacts for all 113 million homes in the U.S., we extrapolated from the simulation of a representative weighted sample of 50,000 virtual homes developed from the 2009 Residential Energy Consumption Survey database. A physics-based simulation model that considered fan energy, energy to condition additional incoming air, and the effect on home heating and cooling due to exhausting the heat from cooking was applied to each home. Hoods performing at a level common to hoods currently in U.S. homes would require 19?33 TWh [69?120 PJ] of site energy, 31?53 TWh [110-190 PJ] of source energy; and would cost consumers $1.2?2.1 billion (U.S.$2010) annually in the U.S. housing stock. The average household would spend less than $15 annually. Reducing required airflow, e.g. with designs that promote better pollutant capture has more energy saving potential, on average, than improving fan efficiency.

  20. Employment status, residential and workplace food environments: associations with women's eating behaviours.

    Science.gov (United States)

    Thornton, Lukar E; Lamb, Karen E; Ball, Kylie

    2013-11-01

    There remains a lack of consistent evidence linking food environments with eating behaviours. Studies to date have largely ignored the way different individuals interact with their local food environment and have primarily focussed on exposures within the residential neighbourhood without consideration of exposures around the workplace, for example. In this study we firstly examine whether associations between the residential food environment and eating behaviours differ by employment status and, secondly, whether food environments near employed women's workplaces are more strongly associated with dietary behaviours than food environments near home. Employment status did not modify the associations between residential food environments and eating behaviours, however results showed that having access to healthy foods near the workplace was associated with healthier food consumption. Policies focused on supportive environments should consider commercial areas as well as residential neighbourhoods. © 2013 Elsevier Ltd. All rights reserved.

  1. Search Engine Customization and Data Set Builder

    OpenAIRE

    Arias Moreno, Fco Javier

    2009-01-01

    There are two core objectives in this work: firstly, to build a data set, and secondly, to customize a search engine. The first objective is to design and implement a data set builder. There are two steps required for this. The first step is to build a crawler. The second step is to include a cleaner. The crawler collects Web links. The cleaner extracts the main content and removes noise from the files crawled. The goal of this application is crawling Web news sites to find the...

  2. Economics of Condensing Gas Furnaces and Water Heaters Potential in Residential Single Family Homes

    OpenAIRE

    Lekov, Alex

    2010-01-01

    Residential space and water heating accounts for over 90percent of total residential primary gas consumption in the United States. Condensing space and water heating equipment are 10-30percent more energy-efficient than conventional space and water heating. Currently, condensing gas furnaces represent 40 percent of shipments and are common in the Northern U.S. market. Meanwhile, manufacturers are planning to develop condensing gas storage water heaters to qualify for Energy Star? certificati...

  3. The Unexplored Power and Potential of Youth as Peace-builder

    NARCIS (Netherlands)

    Del Felice, M.C.; Wisler, A.

    2007-01-01

    Around the world many young people are victims of cultural, direct, and structural violence and become carriers of that violence or perpetration. There is a strong tendency among politicians and researchers to see youth as a problem to be solved. However, many youth are peaceful and peace-builders.

  4. Legionnaires' Disease acquired within the homes of two patients: link to the home water supply

    International Nuclear Information System (INIS)

    Stout, J.E.; Yu, V.L.; Muraca, P.

    1987-01-01

    Two patients with sporadic community-acquired legionnaires' disease are described. Legionella pneumophila was isolated from sputum specimens, and seroconversion of antibody titers was demonstrated for both patients. Legionella pneumophila was also recovered from the residential water supply of both patients. In each case, the serogroup of the environmental organism matched that of the infecting organism. In one patient, serogroup 3 was isolated - a rare cause of legionnaires' disease, and in the second case, monoclonal antibody testing confirmed that the serogroup 1 organisms isolated from sputum and residential water supply samples were identical. The incubation period of legionnaires' disease is presumed to be up to two weeks. Because of medical problems, both patients had been confined to their homes for the entire two weeks before the onset of symptoms. This is the first report that links acquisition of community-acquired legionnaires' disease to contaminated water supplies within the homes of susceptible patients

  5. Integrated Payment and Delivery Models Offer Opportunities and Challenges for Residential Care Facilities

    OpenAIRE

    Grabowski, David C.; Caudry, Daryl J.; Dean, Katie M.; Stevenson, David G.

    2015-01-01

    Under health care reform, a series of new financing and delivery models are being piloted to integrate health and long-term care services for older adults. To date, these programs have not encompassed residential care facilities, with most programs focusing on long-term care recipients in the community or the nursing home. Our analyses indicate that individuals living in residential care facilities have similarly high rates of chronic illness and Medicare utilization when compared with simila...

  6. Impact of Furniture Layout on Indoor Daylighting Performance in Existing Residential Buildings in Malaysia

    Directory of Open Access Journals (Sweden)

    Seyed Mohammad Mousavi

    2018-06-01

    Full Text Available Currently, home-based computing workspaces have developed substantially all over the world, especially in Malaysia. This growing trend attracts computer workers to run a business from their residential units. Hence, visual comfort needs to be considered in addition to thermal comfort for home workers in their residential working rooms. While such rooms are always occupied with furniture, the layout of the furniture may influence the indoor daylighting distribution. Several various furniture layouts can be arranged in a residential working room. However, to have better generalisation, this study focused on the impacts of mostly-used-furniture-layouts (MUFLs on indoor daylighting performance in residential working rooms. The field measurement was conducted in a typically furnished room under a tropical sky to validate the results of the simulation software under different sky conditions. Then, daylight ratio (DR, as a quantitative daylighting variable, and the illuminance uniformity ratio (IUR, CIE glare index (CGI, and Guth visual comfort probability (GVCP, as qualitative daylighting variables, were analysed through simulation experiments. In conclusion, by changing the furniture layout, daylight uniformity recorded the highest fluctuations in the case room among all variables. While various furniture layouts, in a residential working room in the tropics, may even slightly reduce the extreme indoor daylight quantity, they can worsen the indoor daylight quality compared to an unfurnished space. The paper shows that furniture as an interior design parameter cannot help to improve tropical daylighting performance in a building.

  7. Home range and habitat use of Trumpeter Hornbills Bycanistes ...

    African Journals Online (AJOL)

    46 km2 (95% LoCoH). However, individual home range sizes varied monthly and seasonally. We found that all individuals tagged used mostly the indigenous forest and frequently utilised urban residential areas (gardens) with little or no use of cultivated land. Observed individual variations in monthly and seasonal home ...

  8. 13 CFR 120.391 - What is the Builders Loan Program?

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What is the Builders Loan Program? 120.391 Section 120.391 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS...)(9) of the Act, SBA may make or guarantee loans to finance small general contractors to construct or...

  9. Stories of change: the text analysis of handovers in an Italian psychiatric residential care home.

    Science.gov (United States)

    Accordini, M; Saita, E; Irtelli, F; Buratti, M; Savuto, G

    2017-05-01

    WHAT IS KNOWN ON THE SUBJECT?: There is a growing emphasis on communication as a result of the move towards the more inclusive approach associated with the community-based rehabilitation model. Therefore, more importance is attached to handovers. Besides ensuring transfer of information, handovers enhance group cohesion, socialize staff members to the practices of the service and capture its organizational culture. WHAT THIS PAPER ADDS TO EXISTING KNOWLEDGE?: While handovers are mainly used for information transfer and to manage the services' daily routine, this paper offers an insight on how handovers can be conceived as valuable instruments to document cultural and organizational change. Only a limited amount of studies has focused on handovers in mental healthcare settings, and most of them only consider the perspectives of psychiatric nurses, while embracing a broader perspective, this paper provides valuable insights into the perspectives of various service providers. The overcoming of the dichotomy deficit-based vs. recovery-oriented model is possible if professionals use handovers to reflect upon their practice and the ways in which their cultural models are affected by the environmental context. WHAT ARE THE IMPLICATIONS FOR PRACTICE?: Handovers are valuable instruments to document organizational change. It would be important for psychiatric and rehabilitation facilities to keep track of the handover records over time as they may provide insightful information about cultural change and the transformations in the core values and beliefs held by professionals. Handovers assure a timely and correct information transfer while socializing workers to the service's culture; however, no study describes them as instruments to document organizational change and only a few have focused on psychiatric settings. Aim To investigate the change in the culture of an Italian psychiatric residential care home as perceived by its mental health workers (MHWs) over the course of

  10. Resident Satisfaction and Its Components in Residential Aged Care

    Science.gov (United States)

    Chou, Shu-Chiung; Boldy, Duncan P.; Lee, Andy H.

    2002-01-01

    Purpose: The purpose of this study was to assess the direction and magnitude of the effects among the components of resident satisfaction in residential aged care and to examine if the relationships among satisfaction components vary according to facility type (i.e., nursing home and hostel). Briefly, a hostel is a low-care facility in which…

  11. Death wishes among older people assessed for home support and long-term aged residential care.

    Science.gov (United States)

    Cheung, Gary; Edwards, Siobhan; Sundram, Frederick

    2017-12-01

    Death wishes in older people are common and may progress to suicidal ideation and attempts. This study used routinely collected data from the interRAI Home Care assessment to examine the prevalence and clinical predictors of death wishes in older New Zealanders assessed for home support and long-term aged residential care. Data were collected from 35 734 people aged over 65 during 2012-2014. Chi-squared analyses were used to determine significant relationships between the presence of death wishes and demographic factors, health and functional status, and emotional and psychosocial well-being. A three-step hierarchical logistic regression model was used to determine the predictive variables of death wishes, and odds ratios were calculated. Death wishes were present in 9.5% of the sample. The following factors were significantly associated with death wishes: physical health (poor self-reported health, recurrent falls, severe fatigue and inadequate pain control), psychological factors (depression, major stressors and anxiety), social factors (loneliness and decline in social activities) and impaired cognition. Depression (odds ratio = 2.54, 95% confidence interval = 2.29-2.81), loneliness (odds ratio = 2.40, 95% confidence interval = 2.20-2.63) and poor self-reported health (odds ratio = 2.34, 95% confidence interval = 1.78-3.07) had the greatest odds ratios in the full model. Clinically significant depression alone cannot fully account for the development of death wishes in the elderly, and several factors are independently associated with death wishes. This knowledge can help clinicians caring for older persons to identify people who are most at risk of developing death wishes. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  12. Multiresistant pathogens in geriatric nursing – infection control in residential facilities for geriatric nursing in Germany

    Directory of Open Access Journals (Sweden)

    Peters, Claudia

    2014-09-01

    Full Text Available [english] Background: The increase of multidrug-resistant organisms (MDROs causes problems in geriatric nursing homes. Older people are at increased a growing risk of infection due to multimorbidity and frequent stays in hospital. A high proportion of the elderly require residential care in geriatric nursing facilities, where hygiene requirements in nursing homes are similar to those in hospitals. For this reason we examined how well nursing homes are prepared for MDROs and how effectively protect their infection control residents and staff.Methods: A cross-sectional study was performed on infection control in residential geriatric nursing facilities in Germany 2012. The questionnaire recorded important parameters of hygiene, resident and staff protection and actions in case of existing MDROs.Results: The response was 54% in Hamburg and 27% in the rest of Germany. Nursing homes were generally well equipped for dealing with infection control: There were standards for MDROs and regular hygiene training for staff. The facilities provided adequate protective clothing, affected residents are usually isolated and hygienic laundry processing conducted. There are deficits in the communication of information on infected residents with hospitals and general practitioners. 54% of nursing homes performed risk assessments for staff infection precaution.Conclusion: There is a growing interest in MDROs and infection control will be a challenge in for residential geriatric nursing facilities in the future. This issue has also drawn increasing attention. Improvements could be achieved by improving communication between different participants in the health service, together with specific measures for staff protection at work.

  13. Residential Mobility di Pinggiran Kota Semarang Jawa Tengah (Studi Kasus Kaum Miskin Kota di Kota Semarang

    Directory of Open Access Journals (Sweden)

    Moh. Gamal Rindarjono

    2016-08-01

    Full Text Available This research was aimed in analyzing and examining the development of slum residential in Semarang, including its center of the city urban, urban-fringe and sub-urban area. Within the development of the slum residential due to mobility of the urban poor, the phenomenon in the term of residential mobility occurred. Using both qualitative and quantitative methods, this research was applying distant-interpretation data in examining slum residential phenomenon and terrestrial data in analyzing both social and cultural issues related to development of slum residential. This research resulting a residential mobility model throughout areas of research, especially sub-urban including the Chinese cemetery area; the new migrant was the urbanist namely the bridge headers group, consists of tramp and hobos whom should be concerned more. Though they just have settled in short-period within the area, their income was categorized financially settled. They owned their own home not as the renter and even, built housing for their subordinates amounted 7-15 families in a complex of residential. Stability of the income was also supported by resident-owning whereas selecting its location based on the land-availability which initially settled the location illegally among the graves. This location was selected since its less-maintained condition by neither their descendant nor cemetery officer which then densely covered by bushes. Availability of the sufficient land leads them to build their residential which also used as the scrap collection space. During the times, their number was increased referred to their raising income. Legalizing their residential was the next step for their existence and sustainability by purchasing or renting the land. Eventually this bridge header was earning a stable income, owning their own home, and locating their residential in the sub-urban area furthermore but unfortunately less-supported by a highly established life style but an

  14. GeoBuilder: a geometric algorithm visualization and debugging system for 2D and 3D geometric computing.

    Science.gov (United States)

    Wei, Jyh-Da; Tsai, Ming-Hung; Lee, Gen-Cher; Huang, Jeng-Hung; Lee, Der-Tsai

    2009-01-01

    Algorithm visualization is a unique research topic that integrates engineering skills such as computer graphics, system programming, database management, computer networks, etc., to facilitate algorithmic researchers in testing their ideas, demonstrating new findings, and teaching algorithm design in the classroom. Within the broad applications of algorithm visualization, there still remain performance issues that deserve further research, e.g., system portability, collaboration capability, and animation effect in 3D environments. Using modern technologies of Java programming, we develop an algorithm visualization and debugging system, dubbed GeoBuilder, for geometric computing. The GeoBuilder system features Java's promising portability, engagement of collaboration in algorithm development, and automatic camera positioning for tracking 3D geometric objects. In this paper, we describe the design of the GeoBuilder system and demonstrate its applications.

  15. Happy in a nursing home?

    NARCIS (Netherlands)

    Cretien van Campen; Debbie Verbeek-Oudijk

    2017-01-01

    Original title: Gelukkig in een verpleeghuis? Life in Dutch residential nursing and care homes is changing. The number of frail older persons in the Netherlands is increasing. Older people are increasingly living independently for longer, and only the most frail older persons move to a nursing or

  16. EVOLUTION OF THE ROMANIAN RESIDENTIAL MARKET AFTER OUTBREAK OF THE CURRENT ECONOMIC AND FINANCIAL CRISIS

    Directory of Open Access Journals (Sweden)

    Şteliac Nela

    2013-04-01

    Full Text Available The residential market is one of the market sectors seriously affected by the current economic and financial crisis. This is mirrored both in the fall of real estate trading prices and in the decreased number of transactions and cutback of newly built constructions. This trend is applicable to the entire spectrum of the residential market (luxury properties and homes destined to average-income customers. Romania is no exception from this European and world-wide state of affairs. This paper aims to briefly outline the trends on the Romanian residential market in the aftermath of the current crisis.

  17. Home Appliance Load Scheduling with SEMIAH

    DEFF Research Database (Denmark)

    Jacobsen, Rune Hylsberg; Ghasem Azar, Armin; Zhang, Qi

    2015-01-01

    The European research project SEMIAH aims at designing a scalable infrastructure for residential demand response. This paper presents the progress towards a centralized load scheduling algorithm for controlling home appliances taking power grid constraints and satisfaction of consumers into account....

  18. Captivate MenuBuilder: Creating an Online Tutorial for Teaching Software

    Science.gov (United States)

    Yelinek, Kathryn; Tarnowski, Lynn; Hannon, Patricia; Oliver, Susan

    2008-01-01

    In this article, the authors, students in an instructional technology graduate course, describe a process to create an online tutorial for teaching software. They created the tutorial for a cyber school's use. Five tutorial modules were linked together through one menu screen using the MenuBuilder feature in the Adobe Captivate program. The…

  19. Building On Builder: The Persistent Icarus Syndrome at Twenty Years

    Science.gov (United States)

    2013-06-01

    mission of the United States Air Force is to "fly, fight, and win…in air, space and cyberspace"--as an intergral member of the Joint team that...Scenarios: A Military Futurist Explores War in the Twenty-First Century (New York: Bantam Books Trade Paperbacksl, 2009), 17. 33 Carl H. Builder

  20. Lost in translation? A multilingual Query Builder improves the quality of PubMed queries: a randomised controlled trial.

    Science.gov (United States)

    Schuers, Matthieu; Joulakian, Mher; Kerdelhué, Gaetan; Segas, Léa; Grosjean, Julien; Darmoni, Stéfan J; Griffon, Nicolas

    2017-07-03

    MEDLINE is the most widely used medical bibliographic database in the world. Most of its citations are in English and this can be an obstacle for some researchers to access the information the database contains. We created a multilingual query builder to facilitate access to the PubMed subset using a language other than English. The aim of our study was to assess the impact of this multilingual query builder on the quality of PubMed queries for non-native English speaking physicians and medical researchers. A randomised controlled study was conducted among French speaking general practice residents. We designed a multi-lingual query builder to facilitate information retrieval, based on available MeSH translations and providing users with both an interface and a controlled vocabulary in their own language. Participating residents were randomly allocated either the French or the English version of the query builder. They were asked to translate 12 short medical questions into MeSH queries. The main outcome was the quality of the query. Two librarians blind to the arm independently evaluated each query, using a modified published classification that differentiated eight types of errors. Twenty residents used the French version of the query builder and 22 used the English version. 492 queries were analysed. There were significantly more perfect queries in the French group vs. the English group (respectively 37.9% vs. 17.9%; p PubMed queries in particular for researchers whose first language is not English.

  1. Home audit program: management manual

    Energy Technology Data Exchange (ETDEWEB)

    1980-09-01

    Many public power systems have initiated home energy audit programs in response to the requests of their consumers. The manual provides smaller public power systems with the information and specific skills needed to design and develop a program of residential energy audits. The program is based on the following precepts: locally owned public systems are the best, and in many cases the only agencies available to organize and coordinate energy conservation programs in many smaller communities; consumers' rights to energy conservation information and assistance should not hinge on the size of the utility that serves them; in the short run, public power systems of all sizes should offer residential energy conservation assistance to their consumers, because such assistance is desirable, necessary, and in the public interest; and in the long run, such programs will complement national energy goals and will produce economic benefits for both consumers and the public power system. A detailed description of home audit program planning, organization, and management are given. (MCW)

  2. Residential mobility and childhood leukemia.

    Science.gov (United States)

    Amoon, A T; Oksuzyan, S; Crespi, C M; Arah, O A; Cockburn, M; Vergara, X; Kheifets, L

    2018-07-01

    Studies of environmental exposures and childhood leukemia studies do not usually account for residential mobility. Yet, in addition to being a potential risk factor, mobility can induce selection bias, confounding, or measurement error in such studies. Using data collected for California Powerline Study (CAPS), we attempt to disentangle the effect of mobility. We analyzed data from a population-based case-control study of childhood leukemia using cases who were born in California and diagnosed between 1988 and 2008 and birth certificate controls. We used stratified logistic regression, case-only analysis, and propensity-score adjustments to assess predictors of residential mobility between birth and diagnosis, and account for potential confounding due to residential mobility. Children who moved tended to be older, lived in housing other than single-family homes, had younger mothers and fewer siblings, and were of lower socioeconomic status. Odds ratios for leukemia among non-movers living mobility, including dwelling type, increased odds ratios for leukemia to 2.61 (95% CI: 1.76-3.86) for living mobility of childhood leukemia cases varied by several sociodemographic characteristics, but not by the distance to the nearest power line or calculated magnetic fields. Mobility appears to be an unlikely explanation for the associations observed between power lines exposure and childhood leukemia. Copyright © 2018 Elsevier Inc. All rights reserved.

  3. Verification steps for the CMS event-builder software

    CERN Multimedia

    CERN. Geneva

    2015-01-01

    The CMS event-builder software is used to assemble event fragments into complete events at 100 kHz. The data originates at the detector front-end electronics, passes through several computers and is transported from the underground to the high-level trigger farm on the surface. I will present the testing and verifications steps a new software version has to pass before it is deployed in production. I will discuss the current practice and possible improvements.

  4. Community-Scale Attic Retrofit and Home Energy Upgrade Data Mining

    Energy Technology Data Exchange (ETDEWEB)

    Berman, M. [Alliance for Residential Building Innovation, Davis, CA (United States); Smith, P. [Alliance for Residential Building Innovation, Davis, CA (United States); Jackson, J. [Alliance for Residential Building Innovation, Davis, CA (United States)

    2015-05-01

    Residential retrofit is an essential element of any comprehensive strategy for improving residential energy efficiency, yet remains a challenging proposition to sell to homeowners due to low levels of awareness and lack of financial incentive. The Alliance for Residential Building Innovation (ARBI) implemented a project to increase residential retrofits in Davis, CA called Retrofit Your Attic developed and appropriate data sets were uploaded to the Building America Field Data Repository (BAFDR). Two key conclusions are a broad based public awareness campaign is needed to increase understanding of the makeup and benefits of residential retrofits and a dramatic shift is needed so that efficient homes are appraised and valued at higher levels. The SAVE Act, proposed bipartisan federal legislation [S.1106], offers one way to accomplish this.

  5. Summary of Needs and Opportunities from the 2011 Residential Energy Efficiency Meeting: Atlanta, Georgia, March 16-18, 2011

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2011-05-01

    This meeting brought together more than 200 professionals representing organizations with vested interest in energy efficiency improvements in residential buildings. Participants identified or reinforced a wide variety of needs and issues associated with delivering high-performance homes in both new and existing home scenarios,

  6. Neighborhood Effects on PND Symptom Severity for Women Enrolled in a Home Visiting Program.

    Science.gov (United States)

    Jones, David E; Tang, Mei; Folger, Alonzo; Ammerman, Robert T; Hossain, Md Monir; Short, Jodie; Van Ginkel, Judith B

    2018-05-01

    The aim of this study was to investigate the association between postnatal depression (PND) symptoms severity and structural neighborhood characteristics among women enrolled in a home visiting program. The sample included 295 mothers who were at risk for developing PND, observed as 3-month Edinburgh Postnatal Depression Scale (EPDS) scores ≥ 10. Two neighborhood predictor components (residential stability and social disadvantage) were analyzed as predictors of PND symptom severity using a generalized estimating equation. Residential stability was negatively associated with PND symptom severity. Social disadvantage was not found to be statistically significantly. The findings suggest that residential stability is associated with a reduction in PND symptom severity for women enrolled in home visiting program.

  7. Advancing Replicable Solutions for High-Performance Homes in the Southeast

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, S. G. [Partnership for Home Innovation, Upper Marlboro, MD (United States). Southface Energy Inst.; Sweet, M. L. [Partnership for Home Innovation, Upper Marlboro, MD (United States). Southface Energy Inst.; Francisco, A. [Partnership for Home Innovation, Upper Marlboro, MD (United States). Southface Energy Inst.

    2016-03-01

    The work presented in this report advances the goals of the U.S. Department of Energy Building America program by improving the energy performance of affordable and market-rate housing. Southface Energy Institute (Southface), part of the U.S. Department of Energy Building America research team Partnership for Home Innovation, worked with owners and builders with various market constraints and ultimate goals for three projects in three climate zones (CZs): Savannah Gardens in Savannah, Georgia (CZ 2); JMC Patrick Square in Clemson, South Carolina (CZ 3); and LaFayette in LaFayette, Georgia (CZ 4). This report documents the design process, computational energy modeling, construction, envelope performance metrics, long-term monitoring results, and successes and failures of the design and execution of these high-performance homes.

  8. From Energy Audits to Home Performance: 30 Years of Articles in Home Energy Magazine

    Energy Technology Data Exchange (ETDEWEB)

    Meier, Alan

    2014-08-11

    Home Energy Magazine has been publishing articles about residential energy efficiency for 30 years. Its goal has been to disseminate technically reliable and neutral information to the practitioners, that is, professionals in the business of home energy efficiency. The articles, editorials, letters, and advertisements are a kind of window on the evolution of energy conservation technologies, policies, and organizations. Initially, the focus was on audits and simple retrofits, such as weatherstripping and insulation. Instrumentation was sparse sometimes limited to a ruler to measure depth of attic insulation and a blower door was exotic. CFLs were heavy, awkward bulbs which might, or might not, fit in a fixture. Saving air conditioning energy was not a priority. Solar energy was only for the most adventurous. Thirty years on, the technologies and business have moved beyond just insulating attics to the larger challenge of delivering home performance and achieving zero net energy. This shift reflects the success in reducing space heating energy and the need to create a profitable industry by providing more services. The leading edge of the residential energy services market is becoming much more sophisticated, offering both efficiency and solar systems. The challenge is to continue providing relevant and reliable information in a transformed industry and a revolutionized media landscape.

  9. 75 FR 68784 - Healthy Indoor Environment Protocols for Home Energy Upgrades

    Science.gov (United States)

    2010-11-09

    ... carefully crafted to stimulate the growth of a vibrant, private sector- led market for residential energy... collaboration to help overcome barriers to these recommended healthy homes actions. Additional resources... assistance and other home energy retrofit program guidance and training materials, and collaboration to help...

  10. Action dependent heuristic dynamic programming based residential energy scheduling with home energy inter-exchange

    International Nuclear Information System (INIS)

    Xu, Yancai; Liu, Derong; Wei, Qinglai

    2015-01-01

    Highlights: • The algorithm is developed in the two-household energy management environment. • We develop the absent energy penalty cost for the first time. • The algorithm has ability to keep adapting in real-time operations. • Its application can lower total costs and achieve better load balancing. - Abstract: Residential energy scheduling is a hot topic nowadays in the background of energy saving and environmental protection worldwide. To achieve this objective, a new residential energy scheduling algorithm is developed for energy management, based on action dependent heuristic dynamic programming. The algorithm works under the circumstance of residential real-time pricing and two adjacent housing units with energy inter-exchange, which can reduce the overall cost and enhance renewable energy efficiency after long-term operation. It is designed to obtain the optimal control policy to manage the directions and amounts of electricity energy flux. The algorithm’s architecture is mainly constructed based on neural networks, denoting the learned characteristics in the linkage of layers. To get close to real situations, many constraints such as maximum charging/discharging power of batteries are taken into account. The absent energy penalty cost is developed for the first time as a part of the performance index function. When the environment changes, the residential energy scheduling algorithm gains new features and keeps adapting in real-time operations. Simulation results show that the developed algorithm is beneficial to energy conversation

  11. Intermediate care: for better or worse? Process evaluation of an intermediate care model between a university hospital and a residential home

    Directory of Open Access Journals (Sweden)

    Janmaat Tonnie ACM

    2005-05-01

    Full Text Available Abstract Background Intermediate care was developed in order to bridge acute, primary and social care, primarily for elderly persons with complex care needs. Such bridging initiatives are intended to reduce hospital stays and improve continuity of care. Although many models assume positive effects, it is often ambiguous what the benefits are and whether they can be transferred to other settings. This is due to the heterogeneity of intermediate care models and the variety of collaborating partners that set up such models. Quantitative evaluation captures only a limited series of generic structure, process and outcome parameters. More detailed information is needed to assess the dynamics of intermediate care delivery, and to find ways to improve the quality of care. Against this background, the functioning of a low intensity early discharge model of intermediate care set up in a residential home for patients released from an Amsterdam university hospital has been evaluated. The aim of this study was to produce knowledge for management to improve quality of care, and to provide more generalisable insights into the accumulated impact of such a model. Methods A process evaluation was carried out using quantitative and qualitative methods. Registration forms and patient questionnaires were used to quantify the patient population in the model. Statistical analysis encompassed T-tests and chi-squared test to assess significance. Semi-structured interviews were conducted with 21 staff members representing all disciplines working with the model. Interviews were transcribed and analysed using both 'open' and 'framework' approaches. Results Despite high expectations, there were significant problems. A heterogeneous patient population, a relatively unqualified staff and cultural differences between both collaborating partners impeded implementation and had an impact on the functioning of the model. Conclusion We concluded that setting up a low intensity

  12. Energy Retrofit Field Study and Best Practices in a Hot-Humid Climate

    Energy Technology Data Exchange (ETDEWEB)

    McIvaine, J.; Sutherland, K.; Martin, E.

    2013-03-01

    Energy efficiency improvement as a component of comprehensive renovation was investigated under U.S. Department of Energy (DOE) funding of the Building America Partnership for Improved Residential Construction (BA-PIRC). Researchers at the Florida Solar Energy Center (FSEC) worked with affordable housing partners renovating foreclosed homes built from the 1950's through the 2000's in the hot-humid climate (within the Southern census region), primarily in Florida. Researchers targeted a 30% improvement in whole-house energy efficiency along with the health and safety, durability, and comfort guidelines outlined in DOE's Builders Challenge Program (Version 1) Quality Criteria.

  13. Home electrical system safety in Italy

    Energy Technology Data Exchange (ETDEWEB)

    Auditor,

    1990-06-01

    Italy, amongst the industrialized countries, has the highest mortality rate due to accidents associated with the improper use or maintenance of home electrical systems. The increasing use of domestic electrical appliances has raised the risk of accidents, especially in homes equipped with out-dated, low-capacity electrical plants and worn wiring. Within this context, this paper reports on the results of survey to establish the worthiness and type of electrical systems in use in a sample of 1,000 residential buildings. The paper then assesses the efficacy of recent normatives designed to increase the safety and efficiency of home electrical installations.

  14. Regionalised tertiary psychiatric residential facilities.

    Science.gov (United States)

    Lesage, Alain; Groden, David; Goldner, Elliot M; Gelinas, Daniel; Arnold, Leslie M

    2008-01-01

    Psychiatric hospitals remain the main venue for long-term mental health care and, despite widespread closures and downsizing, no country that built asylums in the last century has done away with them entirely--with the recent exception of Italy. Differentiated community-based residential alternatives have been developed over the past decades, with staffing levels that range from full-time professional, to daytime only, to part-time/on-call. This paper reviews the characteristics of community-based psychiatric residential care facilities as an alternative to long-term care in psychiatric hospitals. It describes five factors decision makers should consider: 1. number of residential places needed; 2. staffing levels; 3. physical setting; 4. programming; and 5. governance and financing. In Italy, facilities with full-time professional staff have been developed since the mid-1990s to accommodate the last cohorts of patients discharged from psychiatric hospitals. In the United Kingdom, experiments with hostel wards since the 1980s have shown that home-like, small-scale facilities with intensive treatment and rehabilitation programming can be effective for the most difficult-to-place patients. More recently in Australia, Community Care Units (CCUs) have been applying this concept. In the Canadian province of British Columbia (BC), Tertiary Psychiatric Residential Facilities (TPRFs) have been developed as part of an effort to regionalise health and social services and downsize and ultimately close its only psychiatric hospital. This type of service must be further developed in addition to the need for forensic, acute-care and intermediate-level beds, as well as for community-based care such as assertive community treatment and intensive case management. All these types of services, together with long-term community-based residential care, constitute the elements of a balanced mental health care system. As part of a region's balanced mental health care plan, these Tertiary

  15. Performance of the CMS Event Builder

    Energy Technology Data Exchange (ETDEWEB)

    Andre, J.M.; et al.

    2017-11-22

    The data acquisition system (DAQ) of the CMS experiment at the CERN Large Hadron Collider assembles events at a rate of 100 kHz, transporting event data at an aggregate throughput of to the high-level trigger farm. The DAQ architecture is based on state-of-the-art network technologies for the event building. For the data concentration, 10/40 Gbit/s Ethernet technologies are used together with a reduced TCP/IP protocol implemented in FPGA for a reliable transport between custom electronics and commercial computing hardware. A 56 Gbit/s Infiniband FDR Clos network has been chosen for the event builder. This paper presents the implementation and performance of the event-building system.

  16. Home area networks and IPTV

    CERN Document Server

    Rémy, Jean-Gabriel

    2013-01-01

    The field of Home Area Networks (HAN), a dedicated residential subset of LAN technologies for home-based use, is fast becoming the next frontier for the communications industry.This book describes the various technologies involved in the implementation of a HAN: high-speed Internet connections, indoor implementations, services, software, and management packages. It also reviews multimedia applications (which are increasingly the most important and complex aspects of most HANs) with a detailed description of IPTV technology. It highlights the main technologies used for HANs: information tra

  17. Implementing nutrition guidelines for older people in residential care homes: a qualitative study using Normalization Process Theory

    Directory of Open Access Journals (Sweden)

    Bamford Claire

    2012-10-01

    Full Text Available Abstract Background Optimizing the dietary intake of older people can prevent nutritional deficiencies and diet-related diseases, thereby improving quality of life. However, there is evidence that the nutritional intake of older people living in care homes is suboptimal, with high levels of saturated fat, salt, and added sugars. The UK Food Standards Agency therefore developed nutrient- and food-based guidance for residential care homes. The acceptability of these guidelines and their feasibility in practice is unknown. This study used the Normalization Process Theory (NPT to understand the barriers and facilitators to implementing the guidelines and inform future implementation. Methods We conducted a process evaluation in five care homes in the north of England using qualitative methods (observation and interviews to explore the views of managers, care staff, catering staff, and domestic staff. Data were analyzed thematically and discussed in data workshops; emerging themes were then mapped to the constructs of NPT. Results Many staff perceived the guidelines as unnecessarily restrictive and irrelevant to older people. In terms of NPT, the guidelines simply did not make sense (coherence, and as a result, relatively few staff invested in the guidelines (cognitive participation. Even where staff supported the guidelines, implementation was hampered by a lack of nutritional knowledge and institutional support (collective action. Finally, the absence of observable benefits to clients confirmed the negative preconceptions of many staff, with limited evidence of reappraisal following implementation (reflexive monitoring. Conclusions The successful implementation of the nutrition guidelines requires that the fundamental issues relating to their perceived value and fit with other priorities and goals be addressed. Specialist support is needed to equip staff with the technical knowledge and skills required for menu analysis and development and to

  18. Profits or preferences? Assessing the adoption of residential solar thermal technologies

    International Nuclear Information System (INIS)

    Mills, Bradford F.; Schleich, Joachim

    2009-01-01

    Solar thermal technologies offer the potential to meet a substantial share of residential water and space heating needs in the EU, but current levels of adoption are low. This paper uses data from a large sample of German households to assess the effects of geographic, residence, and household characteristics on the adoption of solar thermal water and space heating technologies. In addition, the impact of solar thermal technology adoption on household energy expenditures is estimated after controlling for observed household heterogeneity in geographic, residential, and household characteristics. While evidence is found of moderate household energy expenditure savings from combined solar water and space heating systems, the findings generally confirm that low in-home energy cost savings and fixed housing stocks limit the diffusion of residential solar thermal technologies. Little evidence is found of differential adoption by distinct socio-economic groups.

  19. Identifying Housing and Meteorological Conditions Influencing Residential Air Exchange Rates in the DEARS and RIOPA Studies: Development of Distributions for Human Exposure Modeling

    Science.gov (United States)

    Appropriate prediction of residential air exchange rate (AER) is important for estimating human exposures in the residential microenvironment, as AER drives the infiltration of outdoor-generated air pollutants indoors. AER differences among homes may result from a number of fact...

  20. User-Preference-Driven Model Predictive Control of Residential Building Loads and Battery Storage for Demand Response: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Xin [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Baker, Kyri A. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Christensen, Dane T. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Isley, Steven C. [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-08-21

    This paper presents a user-preference-driven home energy management system (HEMS) for demand response (DR) with residential building loads and battery storage. The HEMS is based on a multi-objective model predictive control algorithm, where the objectives include energy cost, thermal comfort, and carbon emission. A multi-criterion decision making method originating from social science is used to quickly determine user preferences based on a brief survey and derive the weights of different objectives used in the optimization process. Besides the residential appliances used in the traditional DR programs, a home battery system is integrated into the HEMS to improve the flexibility and reliability of the DR resources. Simulation studies have been performed on field data from a residential building stock data set. Appliance models and usage patterns were learned from the data to predict the DR resource availability. Results indicate the HEMS was able to provide a significant amount of load reduction with less than 20% prediction error in both heating and cooling cases.

  1. Use of in-patient hospital beds by people living in residential care.

    Science.gov (United States)

    Finucane, P; Wundke, R; Whitehead, C; Williamson, L; Baggoley, C

    2000-01-01

    There is concern that people living in residential care in Australia make significant and often inappropriate use of acute in-patient hospital services. To date, no factual information has been collected in Australia and its absence may allow myths and negative stereotypes to proliferate. To determine how and why people living in residential care in Australia use in-patient hospital beds. To determine the outcome of hospitalisation and functional status at 3 months following discharge. Prospective study of 184 consecutive admissions to hospital following Emergency Department (ED) attendance involving people aged over 65 years and living in residential care in southern Adelaide, South Australia. Information was obtained from the facilities' transfer letters, and where these were inadequate or absent, telephone interviews were held with residential care staff. 153 people accounted for the 184 admissions. They had a mean age of 84 years and 69% were female. 61% came from hostels and 35% from nursing homes. They had a wide range of clinical problems and twice as many were admitted to medical than to surgical units. Their mean length of hospital stay was 7.9 days, 2.3 days higher than for non-same-day patients and was higher for hostel than for nursing home residents. All but two admissions were considered unavoidable though the provision of specialised care within residential care could have prevented a further 19 (10%) admissions. 96% of admissions resulted in survival to leave hospital and in 74%, people returned directly to their place of origin. At 3 months follow-up, a further 20% of the group had died while 5% were in hospital. In all, 14% of the original group were in a different long-term care facility while 56% were living at their former residence. People living in residential care are often hospitalised because of acute illness. In the vast majority of cases hospitalisation is both appropriate and unavoidable. Most did not require prolonged hospitalisation

  2. A systematic mapping review of Randomized Controlled Trials (RCTs in care homes

    Directory of Open Access Journals (Sweden)

    Gordon Adam L

    2012-06-01

    Full Text Available Abstract Background A thorough understanding of the literature generated from research in care homes is required to support evidence-based commissioning and delivery of healthcare. So far this research has not been compiled or described. We set out to describe the extent of the evidence base derived from randomized controlled trials conducted in care homes. Methods A systematic mapping review was conducted of the randomized controlled trials (RCTs conducted in care homes. Medline was searched for “Nursing Home”, “Residential Facilities” and “Homes for the Aged”; CINAHL for “nursing homes”, “residential facilities” and “skilled nursing facilities”; AMED for “Nursing homes”, “Long term care”, “Residential facilities” and “Randomized controlled trial”; and BNI for “Nursing Homes”, “Residential Care” and “Long-term care”. Articles were classified against a keywording strategy describing: year and country of publication; randomization, stratification and blinding methodology; target of intervention; intervention and control treatments; number of subjects and/or clusters; outcome measures; and results. Results 3226 abstracts were identified and 291 articles reviewed in full. Most were recent (median age 6 years and from the United States. A wide range of targets and interventions were identified. Studies were mostly functional (44 behaviour, 20 prescribing and 20 malnutrition studies rather than disease-based. Over a quarter focussed on mental health. Conclusions This study is the first to collate data from all RCTs conducted in care homes and represents an important resource for those providing and commissioning healthcare for this sector. The evidence-base is rapidly developing. Several areas - influenza, falls, mobility, fractures, osteoporosis – are appropriate for systematic review. For other topics, researchers need to focus on outcome measures that can be compared and collated.

  3. Residential Radon Exposure and Skin Cancer Incidence in a Prospective Danish Cohort

    DEFF Research Database (Denmark)

    Brauner, Elvira Vaclavik; Loft, Steffen; Sørensen, Mette

    2015-01-01

    Background Although exposure to UV radiation is the major risk factor for skin cancer, theoretical models suggest that radon exposure can contribute to risk, and this is supported by ecological studies. We sought to confirm or refute an association between long-term exposure to residential radon...... and the risk for malignant melanoma (MM) and non-melanoma skin cancer (NMSC) using a prospective cohort design and long-term residential radon exposure. Methods During 1993-1997, we recruited 57,053 Danish persons and collected baseline information. We traced and geocoded all residential addresses...... exposure may contribute to development of basal cell carcinoma of the skin. We cannot exclude confounding from sunlight and cannot conclude on causality, as the relationship was stronger amongst persons living in apartments and nonexistent amongst those living in single detached homes....

  4. Designing a Portable and Low Cost Home Energy Management Toolkit

    NARCIS (Netherlands)

    Keyson, D.V.; Al Mahmud, A.; De Hoogh, M.; Luxen, R.

    2013-01-01

    In this paper we describe the design of a home energy and comfort management system. The system has three components such as a smart plug with a wireless module, a residential gateway and a mobile app. The combined system is called a home energy management and comfort toolkit. The design is inspired

  5. The Misuse of Anabolic-Androgenic Steroids among Iranian Recreational Male Body-Builders and Their Related Psycho-Socio-Demographic factors.

    Science.gov (United States)

    Angoorani, Hooman; Halabchi, Farzin

    2015-12-01

    The high prevalence and potential side effects of anabolic-androgenic steroids (AAS) misuse by athletes has made it a major public health concern. Epidemiological studies on the abuse of such drugs are mandatory for developing effective preventive drug control programs in sports community. This study aimed to investigate the prevalence of AAS abuse and their association with some psycho-socio-demographic factors in Iranian male recreational body-builders. Between March and October 2011; 906 recreational male body-builders from 103 randomly selected bodybuilding clubs in Tehran, Iran were participated in this study. Some psycho-socio- demographic factors including age, job, average family income, family size, sport experience (months), weekly duration of the sporting activity (h), purpose of participation in sporting activity, mental health as well as body image (via General Health Questionnaire and Multidimensional Body-Self Relations Questionnaire, respectively), and history of AAS use were obtained by interviews using questionnaires. Participants were all recreational male body-builders [mean age (SD): 25.7 (7.1), ranging 14-56 yr]. Self-report of AAS abuse was registered in 150 body-builders (16.6%). Among different psycho-socio-demographic factors, only family income and sport experience were inversely associated with AAS abuse. Lifetime prevalence of AAS abuse is relatively high among recreational body-builders based on their self-report. Some psycho-socio-demographic factors including family income and sport experience may influence the prevalence of AAS abuse.

  6. The Misuse of Anabolic-Androgenic Steroids among Iranian Recreational Male Body-Builders and Their Related Psycho-Socio-Demographic factors

    Science.gov (United States)

    ANGOORANI, Hooman; HALABCHI, Farzin

    2015-01-01

    Background: The high prevalence and potential side effects of anabolic-androgenic steroids (AAS) misuse by athletes has made it a major public health concern. Epidemiological studies on the abuse of such drugs are mandatory for developing effective preventive drug control programs in sports community. This study aimed to investigate the prevalence of AAS abuse and their association with some psycho-socio-demographic factors in Iranian male recreational body-builders. Methods: Between March and October 2011; 906 recreational male body-builders from 103 randomly selected bodybuilding clubs in Tehran, Iran were participated in this study. Some psycho-socio- demographic factors including age, job, average family income, family size, sport experience (months), weekly duration of the sporting activity (h), purpose of participation in sporting activity, mental health as well as body image (via General Health Questionnaire and Multidimensional Body-Self Relations Questionnaire, respectively), and history of AAS use were obtained by interviews using questionnaires. Results: Participants were all recreational male body-builders [mean age (SD): 25.7 (7.1), ranging 14–56 yr]. Self-report of AAS abuse was registered in 150 body-builders (16.6%). Among different psycho-socio-demographic factors, only family income and sport experience were inversely associated with AAS abuse. Conclusion: Lifetime prevalence of AAS abuse is relatively high among recreational body-builders based on their self-report. Some psycho-socio-demographic factors including family income and sport experience may influence the prevalence of AAS abuse. PMID:26811817

  7. Survey of residential magnetic field sources

    International Nuclear Information System (INIS)

    Zaffanella, L.E.

    1992-09-01

    A nationwide survey of 1000 residences is underway to determine the sources and characteristics of magnetic fields in the home. This report describes the goals, statistical sampling methods, measurement protocols, and experiences in measuring the first 707 residences of the survey. Some preliminary analysis of the data is also included. Investigators designed a sampling method to randomly select the participating utilities as well as the residential customers for the study. As a first step in the project, 18 utility employee residences were chosen to validate a relatively simple measurement protocol against the results of a more complete and intrusive method. Using the less intrusive measurement protocol, researchers worked closely with representatives from EPRI member utilities to enter customer residences and measure the magnetic fields found there. Magnetic field data were collected in different locations inside and around the residences. Twenty-four-hour recorders were left in the homes overnight. Tests showed that the simplified measurement protocol is adequate for achieving the goals of the study. Methods were developed for analyzing the field caused by a residence's ground current, the lateral field profiles of field lines, and the field measured around the periphery of the residences. Methods of residential source detection were developed that allow identification of sources such as ground connections at an electrical subpanel, two-wire multiple-way switches, and underground or overhead net currents exiting the periphery of a residence

  8. Privacy, modesty, hospitality, and the design of Muslim homes: A literature review

    Directory of Open Access Journals (Sweden)

    Zulkeplee Othman

    2015-03-01

    Full Text Available Traditional Islamic teachings and traditions involve guidelines that have direct applications in the domestic sphere. The principles of privacy, modesty, and hospitality are central to these guidelines; each principle has a significant effect on the design of Muslim homes, as well as on the organization of space and domestic behaviors within each home. This paper reviews literature on the privacy, modesty, and hospitality within Muslim homes. Nineteen publications from 1986 to 2013 were selected and analyzed for content related to the meaning of privacy, modesty, and hospitality in Islam and the design of Muslim homes. Despite the commonly shared guidelines for observing privacy, modesty, and hospitality within each home, Muslims living in different countries are influenced by cultural factors that operate within their country of residence. These factors help to shape the architectural styles and use of space within Muslim homes in different ways. Awareness of the multifactorial nature of the influences on the Muslim perception of home and the use of space is necessary for architects, building designers, engineers, and builders to be properly equipped to meet the needs of clients.

  9. Key Residential Building Equipment Technologies for Control and Grid Support PART I (Residential)

    Energy Technology Data Exchange (ETDEWEB)

    Starke, Michael R [ORNL; Onar, Omer C [ORNL; DeVault, Robert C [ORNL

    2011-09-01

    based on the largest electrical energy consumers in the residential sector are space heating and cooling, washer and dryer, water heating, lighting, computers and electronics, dishwasher and range, and refrigeration. As the largest loads, these loads provide the highest potential for delivering demand response and reliability services. Many residential loads have inherent flexibility that is related to the purpose of the load. Depending on the load type, electric power consumption levels can either be ramped, changed in a step-change fashion, or completely removed. Loads with only on-off capability (such as clothes washers and dryers) provide less flexibility than resources that can be ramped or step-changed. Add-on devices may be able to provide extra demand response capabilities. Still, operating residential loads effectively requires awareness of the delicate balance of occupants health and comfort and electrical energy consumption. This report is Phase I of a series of reports aimed at identifying gaps in automated home energy management systems for incorporation of building appliances, vehicles, and renewable adoption into a smart grid, specifically with the intent of examining demand response and load factor control for power system support. The objective is to capture existing gaps in load control, energy management systems, and sensor technology with consideration of PHEV and renewable technologies to establish areas of research for the Department of Energy. In this report, (1) data is collected and examined from state of the art homes to characterize the primary residential loads as well as PHEVs and photovoltaic for potential adoption into energy management control strategies; and (2) demand response rules and requirements across the various demand response programs are examined for potential participation of residential loads. This report will be followed by a Phase II report aimed at identifying the current state of technology of energy management systems

  10. Cost and time study for constructing raised wood floor systems in the Gulf Coast Region of the United States

    Science.gov (United States)

    Marie Del Bianco; David B. McKeever; Lance Barta

    2012-01-01

    This report is the result of a co-operative effort between the USDA Forest Service, Forest Products Laboratory (FPL) Advanced Housing Research Center, the National Assocation of Home Builders (NAHB) Research Center, and builder members of the Metropolitan Mobile and Baldwin County Home Builders Associations. The study was undertaken to further knowledge that will...

  11. Residential carbon monoxide poisoning from motor vehicles.

    Science.gov (United States)

    Hampson, Neil B

    2011-01-01

    Although morbidity and mortality from accidental carbon monoxide (CO) poisoning are high in the United States, identification of common but poorly recognized sources should help prevention efforts. The study aimed to describe CO poisoning of home occupants due to a vehicle left running in an attached garage. News stories reporting incidents of US CO poisoning were collected daily from March 2007 to September 2009 via a news.Google.com search and data extracted. Patients were individuals reported in the media to have been poisoned with CO in their home by a vehicle running in the attached garage. Main outcome measures were frequency of occurrence, geographic distribution, patient demographics, and mortality. Of 837 CO poisoning incidents reported in US news media over 2 and a half years, 59 (8%) were the result of a vehicle left running in the garage. The elderly were disproportionately affected, with incidents most common in states with larger elderly populations and 29% of cases with age specified occurring in individuals older than 80 years. Among those older than 80 years, 15 of 17 were found dead at the scene. Residential CO poisoning from a vehicle running in the garage is common, disproportionately affects the elderly, has a high mortality rate, and should be preventable with a residential CO alarm. Copyright © 2011 Elsevier Inc. All rights reserved.

  12. Residential Lighting End-Use Consumption Study: Estimation Framework and Initial Estimates

    Energy Technology Data Exchange (ETDEWEB)

    Gifford, Will R.; Goldberg, Miriam L.; Tanimoto, Paulo M.; Celnicker, Dane R.; Poplawski, Michael E.

    2012-12-01

    The U.S. DOE Residential Lighting End-Use Consumption Study is an initiative of the U.S. Department of Energy’s (DOE’s) Solid-State Lighting Program that aims to improve the understanding of lighting energy usage in residential dwellings. The study has developed a regional estimation framework within a national sample design that allows for the estimation of lamp usage and energy consumption 1) nationally and by region of the United States, 2) by certain household characteristics, 3) by location within the home, 4) by certain lamp characteristics, and 5) by certain categorical cross-classifications (e.g., by dwelling type AND lamp type or fixture type AND control type).

  13. OpenSesame: An Open-source, Graphical Experiment Builder for the Social Sciences

    NARCIS (Netherlands)

    Mathot, S.; Schreij, D.B.B.; Theeuwes, J.

    2012-01-01

    In the present article, we introduce OpenSesame, a graphical experiment builder for the social sciences. OpenSesame is free, open-source, and cross-platform. It features a comprehensive and intuitive graphical user interface and supports Python scripting for complex tasks. Additional functionality,

  14. Agricultural and residential pesticides in wipe samples from farmworker family residences in North Carolina and Virginia.

    OpenAIRE

    Quandt, Sara A; Arcury, Thomas A; Rao, Pamela; Snively, Beverly M; Camann, David E; Doran, Alicia M; Yau, Alice Y; Hoppin, Jane A; Jackson, David S

    2004-01-01

    Children of farmworkers can be exposed to pesticides through multiple pathways, including agricultural take-home and drift as well as residential applications. Because farmworker families often live in poor-quality housing, the exposure from residential pesticide use may be substantial. We measured eight locally reported agricultural pesticides and 13 pesticides commonly found in U.S. houses in residences of 41 farmworker families with at least one child < 7 years of age in western North Caro...

  15. Automated builder and database of protein/membrane complexes for molecular dynamics simulations.

    Directory of Open Access Journals (Sweden)

    Sunhwan Jo

    2007-09-01

    Full Text Available Molecular dynamics simulations of membrane proteins have provided deeper insights into their functions and interactions with surrounding environments at the atomic level. However, compared to solvation of globular proteins, building a realistic protein/membrane complex is still challenging and requires considerable experience with simulation software. Membrane Builder in the CHARMM-GUI website (http://www.charmm-gui.org helps users to build such a complex system using a web browser with a graphical user interface. Through a generalized and automated building process including system size determination as well as generation of lipid bilayer, pore water, bulk water, and ions, a realistic membrane system with virtually any kinds and shapes of membrane proteins can be generated in 5 minutes to 2 hours depending on the system size. Default values that were elaborated and tested extensively are given in each step to provide reasonable options and starting points for both non-expert and expert users. The efficacy of Membrane Builder is illustrated by its applications to 12 transmembrane and 3 interfacial membrane proteins, whose fully equilibrated systems with three different types of lipid molecules (DMPC, DPPC, and POPC and two types of system shapes (rectangular and hexagonal are freely available on the CHARMM-GUI website. One of the most significant advantages of using the web environment is that, if a problem is found, users can go back and re-generate the whole system again before quitting the browser. Therefore, Membrane Builder provides the intuitive and easy way to build and simulate the biologically important membrane system.

  16. Resident and family member perceptions of cultural diversity in aged care homes.

    Science.gov (United States)

    Xiao, Lily Dongxia; Willis, Eileen; Harrington, Ann; Gillham, David; De Bellis, Anita; Morey, Wendy; Jeffers, Lesley

    2017-03-01

    Similar to many developed nations, older people living in residential aged care homes in Australia and the staff who care for them have become increasingly multicultural. This cultural diversity adds challenges for residents in adapting to the care home. This study explores: (i) residents' and family members' perceptions about staff and cultural diversity, and (ii) culturally and linguistically diverse residents' and family members' experiences. An interpretive study design employing a thematic analysis was applied. Twenty-three residents and seven family members participated in interviews. Four themes were identified from interpreting residents and family members' perceptions of the impact of cultural diversity on their adaptation to aged care homes: (i) perceiving diversity as an attraction; (ii) adapting to cross-cultural communication; (iii) adjusting to diet in the residential care home; and (iv) anticipating individualized psychosocial interactions. The findings have implications for identifying strategies to support staff from all cultural backgrounds in order to create a caring environment that facilitates positive relationships with residents and supports residents to adjust to the care home. © 2016 John Wiley & Sons Australia, Ltd.

  17. THE PHYSICAL AND CHEMICAL CHARACTERIZATION OF THE EMISSIONS FROM A RESIDENTIAL OIL BOILER

    Science.gov (United States)

    The toxicity of emissions from the combustion of home heating oil and the use of residential oil boilers (ROB) is an important health concern. Yet scant physical and chemical information about the emissions from this source are available for dispersion, climate, and source-recep...

  18. Increasing Emotional Regulation for Youths in Residential Care: Phases of Change

    Science.gov (United States)

    Cimmarusti, Rocco A.

    2011-01-01

    Youths in residential care have likely experienced trauma as they have had atypical and disruptive events occur in their lives that has contributed to their out-of-home placement. For people who have been traumatized, the regulation of emotions is an important feature of their recovery. This article presents a model that traces phases from…

  19. A Policymaker's Guide to Scaling Home Energy Upgrades

    Energy Technology Data Exchange (ETDEWEB)

    LeBaron, Robin [Home Performance Coalition, Moon, PA (United States); Saul-Rinaldi, Kara [Home Performance Coalition, Moon, PA (United States)

    2015-09-01

    There has never been a better time to launch initiatives to promote residential energy efficiency savings. Over the past several decades, residential retrofit programs have demonstrated that energy efficiency measures contribute to achieving multiple benefits, including but not limited to reductions in home energy consumption, stabilization improvements for the grid by shaving peak loads, saving consumers millions on utility bills, and significantly reducing carbon emissions. Although a number of barriers to widespread uptake of home energy upgrades persist, the lessons learned as a result of the 2009 stimulus funding1 have resulted in a set of policy approaches that create new strategies for taking residential energy efficiency to scale.2 The identification of these approaches is well timed; energy efficiency is often the least expensive and most cost effective way to comply with a variety of federal, state and local policies. This Guide is designed to help state and local policymakers to take full advantage of new policy developments by providing them with a comprehensive set of tools to support launching or accelerating residential energy efficiency programs. It is written primarily for state and local policymakers, including state and local executives, legislators, public utility commissioners, and the staff who advise them.

  20. Residential fuelwood consumption in the southeastern U.S

    International Nuclear Information System (INIS)

    Christiansen, E.H.; Larsen, M.D.; Rejda, Karen; Bliss, J.C.; Nepal, S.K.

    1993-01-01

    A telephone survey of households in 13 states in the southeastern U.S. determined residential fuelwood acquisition and use for heating during the 1991 heating season. Although wood burning accounted for only 10% of the total household heat requirement of the region, it accounted for 51% of the total heat requirements of wood-burning households. One-quarter (25%) of the households burned wood, consuming almost 9 million standard cords. Three-quarters (77%) of wood-burning households reported that wood burning contributed to household heating requirements. Wood as a source of home heating was particularly important to low income households, both rural and urban. Wood is the sole source of home heating for 17% of the wood-burning households in the regions. (Author)

  1. Radon: Residential attitudes toward the risk

    International Nuclear Information System (INIS)

    Fort, R.; Hinman, G.; Rosenman, R.; Wandschneider, P.

    1990-01-01

    Veradale, Washington (east of Spokane) is a region of high residential radon concentrations. Three hundred eighty residents of Veradale recently responded to a mail survey designed to elicit (1) their knowledge of and attitudes toward the risks of radon in their homes, (2) the actions they have taken or intend to take to identify and reduce those risks, and (3) policy preferences toward radon. Results reveal that these residents know that they live in an area with high radon levels, that radon causes lung cancer, and that radon will affect their health. However only 11% of respondents have had their homes tested for radon. This especially is puzzling because a large number of respondents claimed that (1) radon was important in home buying decisions, (2) they would test their own homes, (3) they would take action if such tests revealed problems, and (4) their willingness to pay for tests and improvements was well within the current costs of these actions. It remains a mystery why testing is at such a low level. Three other results are of note. First, subsidies for radon tests and home improvements may be having the unintended consequences of unneeded improvements and (potentially) moves without improvements. Second, individuals want radon testing required and results made known during home purchase decisions. Third, at present, weatherization programs that concentrate radon are acceptable to individuals. Of course, the future may hold different results. Administrators of weatherization programs, who are trusted by respondents according to this survey, would do well to institute weatherization programs with reduced radon concentrations in mind

  2. The market value of energy efficiency: What have we learned? What do we still need to learn?

    International Nuclear Information System (INIS)

    Lee, D.; Nevin, R.; Farhar, B.C.

    1998-01-01

    The Environmental Protection Agency (EPA) and the Department of Energy (DOE) at the National Energy Renewable Laboratory (NREL) are investigating the market value of energy efficiency in residential homes. The demonstrated market value for energy efficiency is crucial to the success of EPA's ENERGY STAR Homes Program, providing market information to builders who are deciding whether to construct ENERGY STAR Homes, to lenders who may want to understand the performance of mortgages for energy-efficient homes, and to home owners seeking returns on additional investments in energy-efficient homes. The paper discusses the current dilemma facing the ENERGY STAR Homes Program and the need to demonstrate the value of energy efficiency. The paper presents a brief literature review of past studies on the market value of energy efficiency, as well as a recent analysis on the American Housing Survey. this study suggests that property values increase by $20 to $24 for every $1 reduction in annual fuel bill. Finally, the paper concludes with a summary of a joint research project between EPA and NREL on the market value of ENERGY STAR Homes, and the potential implications of this research

  3. Post-Retrofit Residential Assessments

    Energy Technology Data Exchange (ETDEWEB)

    Lancaster, Ross; lutzenhiser, Loren; Moezzi, Mithra; Widder, Sarah H.; Chandra, Subrato; Baechler, Michael C.

    2012-04-30

    This study examined a range of factors influencing energy consumption in households that had participated in residential energy-efficiency upgrades. The study was funded by a grant from the U.S. Department of Energy’s Pacific Northwest National Laboratory and was conducted by faculty and staff of Portland State University Center for Urban Studies and Department of Economics. This work was made possible through the assistance and support of the Energy Trust of Oregon (ETO), whose residential energy-efficiency programs provided the population from which the sample cases were drawn. All households in the study had participated in the ETO Home Performance with Energy Star (HPwES) program. A number of these had concurrently pursued measures through other ETO programs. Post-retrofit energy outcomes are rarely investigated on a house-by-house basis. Rather, aggregate changes are ordinarily the focus of program impact evaluations, with deviation from aggregate expectations chalked up to measurement error, the vagaries of weather and idiosyncrasies of occupants. However, understanding how homes perform post-retrofit on an individual basis can give important insights to increase energy savings at the participant and the programmatic level. Taking a more disaggregated approach, this study analyzed energy consumption data from before and after the retrofit activity and made comparisons with engineering estimates for the upgrades, to identify households that performed differently from what may have been expected based on the estimates. A statistical analysis using hierarchal linear models, which accounted for weather variations, was performed looking separately at gas and electrical use during the periods before and after upgrades took place. A more straightforward comparison of billing data for 12-month periods before and after the intervention was also performed, yielding the majority of the cases examined. The later approach allowed total energy use and costs to be

  4. Pilot Implementation of a Field Study Design to Evaluate the Impact of Source Control Measures on Indoor Air Quality in High Performance Homes

    Energy Technology Data Exchange (ETDEWEB)

    Widder, Sarah H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Chamness, Michele A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Petersen, Joseph M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Singer, Brett C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Maddalena, Randy L. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Destaillats, Hugo [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Russell, M. L. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2014-10-01

    -emitting and “conventional” materials as installed in newly constructed residential homes using both (1) highly controlled, short-term active samples to precisely characterize the building-related chemical emissions and building contents and (2) a week-long passive sample designed to capture the impact of occupant behavior and related activities on measured IAQ contaminant levels indoors. The combination of detailed short-term measurements with the home under controlled/consistent conditions during pre- and post-occupancy and the week-long passive sampling data provide the opportunity to begin to separate the different emission sources and help isolate and quantify variability in the monitored homes. Between April and August 2014, the research team performed pre-occupancy and post-occupancy sampling in one conventional home and two homes built with low-emitting materials that were generally consistent with EPA’s Indoor airPLUS guidelines. However, for a number of reasons, the full experimental plan was not implemented. The project was intended to continue for up to three years to asses long-term changes in IAQ but the project was limited to one calendar year. As a result, several of the primary research questions related to seasonal impacts and the long-term trends in IAQ could not be addressed. In addition, there were several unexpected issues related to recruiting, availability of home types, and difficulty coordinating with builders/realtors/homeowners. Several field monitoring issues also came up that provide “lessons learned” that led to improvements to the original monitoring plan. The project produced a good experimental plan that is expected to be be useful for future efforts collecting data to support answering these same or similar research questions.

  5. Solar Adoption and Energy Consumption in the Residential Sector

    Science.gov (United States)

    McAllister, Joseph Andrew

    the extent increases are present for some solar adopters, the analysis seeks to determine whether there is a "solar rebound" effect analogous to the "rebound" or "take-back" effect that has been observed and studied within the energy efficiency literature. Similarly, to the extent that electric users may decrease overall consumption after installation of a solar system, the study seeks to explore the possibility that solar adoption is part of a continued effort towards clean energy practices more generally, such as energy efficiency and conservation. In this way, the study seeks to determine whether there is a synergistic effect between solar and decreased consumption, for solar adopters generally or for some subsets therein. The assembled data allowed testing of various hypotheses that could help explain observed changes in consumption in different households. One variable that was carefully examined was the sizing of the solar system. As part of the study, analysis of 4,355 systems was conducted to determine how each residential solar system was sized with respect to pre-installation energy consumption. Other potentially interesting or explanatory variables for which information was available include total and net costs of the solar system; age of the home; the climate zone (inland or coastal) where the home is located; the home's pre-installation energy consumption; home characteristics such as assessed value and square footage; and the identity of the solar installation contractor. Aside from extending the literature on the rebound effect to the context of home-based energy generation, this study links to the innovation diffusion literature by focusing on solar "innovators" to understand more about the characteristics that may drive behavior, or conditions under which they also adopt clean energy technologies and practices. The results have clear policy relevance with regard to the development and coordination of policies to promote integration of solar and energy

  6. The GlycanBuilder: a fast, intuitive and flexible software tool for building and displaying glycan structures.

    Science.gov (United States)

    Ceroni, Alessio; Dell, Anne; Haslam, Stuart M

    2007-08-07

    Carbohydrates play a critical role in human diseases and their potential utility as biomarkers for pathological conditions is a major driver for characterization of the glycome. However, the additional complexity of glycans compared to proteins and nucleic acids has slowed the advancement of glycomics in comparison to genomics and proteomics. The branched nature of carbohydrates, the great diversity of their constituents and the numerous alternative symbolic notations, make the input and display of glycans not as straightforward as for example the amino-acid sequence of a protein. Every glycoinformatic tool providing a user interface would benefit from a fast, intuitive, appealing mechanism for input and output of glycan structures in a computer readable format. A software tool for building and displaying glycan structures using a chosen symbolic notation is described here. The "GlycanBuilder" uses an automatic rendering algorithm to draw the saccharide symbols and to place them on the drawing board. The information about the symbolic notation is derived from a configurable graphical model as a set of rules governing the aspect and placement of residues and linkages. The algorithm is able to represent a structure using only few traversals of the tree and is inherently fast. The tool uses an XML format for import and export of encoded structures. The rendering algorithm described here is able to produce high-quality representations of glycan structures in a chosen symbolic notation. The automated rendering process enables the "GlycanBuilder" to be used both as a user-independent component for displaying glycans and as an easy-to-use drawing tool. The "GlycanBuilder" can be integrated in web pages as a Java applet for the visual editing of glycans. The same component is available as a web service to render an encoded structure into a graphical format. Finally, the "GlycanBuilder" can be integrated into other applications to create intuitive and appealing user

  7. The GlycanBuilder: a fast, intuitive and flexible software tool for building and displaying glycan structures

    Directory of Open Access Journals (Sweden)

    Dell Anne

    2007-08-01

    Full Text Available Abstract Background Carbohydrates play a critical role in human diseases and their potential utility as biomarkers for pathological conditions is a major driver for characterization of the glycome. However, the additional complexity of glycans compared to proteins and nucleic acids has slowed the advancement of glycomics in comparison to genomics and proteomics. The branched nature of carbohydrates, the great diversity of their constituents and the numerous alternative symbolic notations, make the input and display of glycans not as straightforward as for example the amino-acid sequence of a protein. Every glycoinformatic tool providing a user interface would benefit from a fast, intuitive, appealing mechanism for input and output of glycan structures in a computer readable format. Results A software tool for building and displaying glycan structures using a chosen symbolic notation is described here. The "GlycanBuilder" uses an automatic rendering algorithm to draw the saccharide symbols and to place them on the drawing board. The information about the symbolic notation is derived from a configurable graphical model as a set of rules governing the aspect and placement of residues and linkages. The algorithm is able to represent a structure using only few traversals of the tree and is inherently fast. The tool uses an XML format for import and export of encoded structures. Conclusion The rendering algorithm described here is able to produce high-quality representations of glycan structures in a chosen symbolic notation. The automated rendering process enables the "GlycanBuilder" to be used both as a user-independent component for displaying glycans and as an easy-to-use drawing tool. The "GlycanBuilder" can be integrated in web pages as a Java applet for the visual editing of glycans. The same component is available as a web service to render an encoded structure into a graphical format. Finally, the "GlycanBuilder" can be integrated into other

  8. Analysis of Illinois Home Performance with ENERGY STAR® Measure Packages

    Energy Technology Data Exchange (ETDEWEB)

    Baker, J. [Partnership for Advanced Residential Retrofit (PARR), Chicago, IL (United States); Yee, S. [Partnership for Advanced Residential Retrofit (PARR), Chicago, IL (United States); Brand, L. [Partnership for Advanced Residential Retrofit (PARR), Chicago, IL (United States)

    2013-09-01

    Through the Chicagoland Single Family Housing Characterization and Retrofit Prioritization report, the Partnership for Advanced Residential Retrofit research team characterized 15 housing types in the Chicagoland region based on assessor data, utility billing history, and available data from prior energy efficiency programs. Within these 15 groups, a subset showed the greatest opportunity for energy savings based on BEopt Version 1.1 modeling of potential energy efficiency package options and the percent of the housing stock represented by each group. In this project, collected field data from a whole-home program in Illinois are utilized to compare marketplace-installed measures to the energy saving optimal packages previously developed for the 15 housing types. Housing type, conditions, energy efficiency measures installed, and retrofit cost information were collected from 19 homes that participated in the Illinois Home Performance with ENERGY STAR program in 2012, representing eight of the characterized housing groups. Two were selected for further case study analysis to provide an illustration of the differences between optimal and actually installed measures. Taken together, these homes are representative of 34.8% of the Chicagoland residential building stock. In one instance, actual installed measures closely matched optimal recommended measures.

  9. Liability aspects of home energy-rating systems

    Energy Technology Data Exchange (ETDEWEB)

    Hendrickson, P.L.

    1983-10-01

    Liability aspects of home energy rating systems are discussed. An introduction to the rating system concept, including types of rating systems, implementation efforts to date, and possible groups to conduct ratings, is also included. The home energy rating system concept involves the periodic rating of the energy efficiency of residential buildings. The rating can provide a relative indication of a home's energy efficiency and also a quantitative estimate of consumption, fuel cost, or both. Primary attention is given to liability issues associated with developing and performing ratings. Secondary attention is given to possible liability associated with misuse of a rating once it has been performed.

  10. Residential energy efficiency: Progress since 1973 and future potential

    Science.gov (United States)

    Rosenfeld, Arthur H.

    1985-11-01

    Today's 85 million U.S. homes use 100 billion of fuel and electricity (1150/home). If their energy intensity (resource energy/ft2) were still frozen at 1973 levels, they would use 18% more. With well-insulated houses, need for space heat is vanishing. Superinsulated Saskatchewan homes spend annually only 270 for space heat, 150 for water heat, and 400 for appliances, yet they cost only 2000±1000 more than conventional new homes. The concept of Cost of Conserved Energy (CCE) is used to rank conservation technologies for existing and new homes and appliances, and to develop supply curves of conserved energy and a least cost scenario. Calculations are calibrated with the BECA and other data bases. By limiting investments in efficiency to those whose CCE is less than current fuel and electricity prices, the potential residential plus commercial energy use in 2000 AD drops to half of that estimated by DOE, and the number of power plants needed drops by 200. For the whole buildings sector, potential savings by 2000 are 8 Mbod (worth 50B/year), at an average CCE of 10/barrel.

  11. Solar Mosaic Inc. Mosaic Home Solar Loan SunShot 9 Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Walsh, Colin James [Solar Mosaic Inc., Oakland, CA (United States)

    2017-02-09

    The 6686 Mosaic SunShot award has helped Solar Mosaic Inc to progress from an early stage startup focused on commercial crowdfunding to a leading multi-state residential solar lender. The software platform is now used by the majority of the nation's top solar installers and offers a variety of simple home solar loans. Mosaic is has originated approximately $1Bil in solar loans to date to put solar on over 35k rooftops. The company now lends to homeowners with a wide range of credit scores across multiple states and mitigates boundaries preventing them from profiting from ownership of a home solar system. The project included milestones in 5 main categories: 1. Lending to homeowners outside of CA 2. Lending to homeowners with FICO scores under 700 3. Packaging O&M with the home solar loan 4. Allowing residential installers to process home solar loans via API 5. Lowering customer acquisition costs below $1500 This report includes a detailed review of the final results achieved and key findings.

  12. Urban BIPV in the new residential construction industry

    Energy Technology Data Exchange (ETDEWEB)

    Elzinga, D.

    2008-03-15

    This report for the International Energy Agency (IEA) made by Task 10 of the Photovoltaic Power Systems (PVPS) programme takes a look at urban building-integrated photovoltaics (BIPV) in the new residential construction industry. The mission of the Photovoltaic Power Systems Programme is to enhance the international collaboration efforts which accelerate the development and deployment of photovoltaic solar energy. The aim of Task 10 is stated as being to enhance the opportunities for wide-scale, solution-oriented application of photovoltaics in the urban environment. The report states that different types of building require different approaches to BIPV due to their associated varying dimensions and geometry. Several solutions are proposed to encourage the adoption and diffusion of BIPV by the new home residential building industry. These are divided into PV industry-based approaches and policy-based solutions. The former include end-customer focused policies, the identification of early adopters, the creation of product solutions that meet the needs of the building industry and standards and that the construction industry must be engaged in the design and planning stage of residential developments. Policy questions discussed include the provision of incentives, a planned approach to the demonstration of BIPV and the development of BIPV-specific policy.

  13. Development of an Outdoor Temperature Based Control Algorithm for Residential Mechanical Ventilation Control

    Energy Technology Data Exchange (ETDEWEB)

    Less, Brennan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Walker, Iain [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Tang, Yihuan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2014-08-01

    The Incremental Ventilation Energy (IVE) model developed in this study combines the output of simple air exchange models with a limited set of housing characteristics to estimate the associated change in energy demand of homes. The IVE model was designed specifically to enable modellers to use existing databases of housing characteristics to determine the impact of ventilation policy change on a population scale. The IVE model estimates of energy change when applied to US homes with limited parameterisation are shown to be comparable to the estimates of a well-validated, complex residential energy model.

  14. Home and away: Area socioeconomic disadvantage and obesity risk.

    Science.gov (United States)

    Kimbro, Rachel Tolbert; Sharp, Gregory; Denney, Justin T

    2017-03-01

    Although residential context is linked to obesity risk, less is known about how the additional places where we work, shop, play, and worship may influence that risk. We employ longitudinal data from the Los Angeles Family and Neighborhood Survey (LAFANS) to derive time-weighted measures of exposure to home and activity space contexts to ascertain the impacts of each on obesity risk for adults. Results show that increased exposure to socioeconomic disadvantage in the residential neighborhood significantly increases obesity risk, and although activity space disadvantage does not directly influence obesity, it reduces the association between residential disadvantage and obesity. We further explore the ways in which residential and activity space disadvantages may interact to influence obesity and discuss the value of integrating personal exposure and activity space contexts to better understand how places contribute to individual health risks. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. 77 FR 28519 - Test Procedure Guidance for Room Air Conditioners, Residential Dishwashers, and Residential...

    Science.gov (United States)

    2012-05-15

    ... Guidance for Room Air Conditioners, Residential Dishwashers, and Residential Clothes Washers: Public... procedures for room air conditioners, residential dishwashers, and residential clothes washers. DATES: DOE...'s existing test procedures for residential room air conditioners, residential dishwashers, and...

  16. Fall prevention and safety communication training for foremen: report of a pilot project designed to improve residential construction safety.

    Science.gov (United States)

    Kaskutas, Vicki; Dale, Ann Marie; Lipscomb, Hester; Evanoff, Brad

    2013-02-01

    Falls from heights account for 64% of residential construction worker fatalities and 20% of missed work days. We hypothesized that worker safety would improve with foremen training in fall prevention and safety communication. Training priorities identified through foreman and apprentice focus groups and surveys were integrated into an 8-hour training. We piloted the training with ten foremen employed by a residential builder. Carpenter trainers contrasted proper methods to protect workers from falls with methods observed at the foremen's worksites. Trainers presented methods to deliver toolbox talks and safety messages. Results from worksite observational audits (n=29) and foremen/crewmember surveys (n=97) administered before and after training were compared. We found that inexperienced workers are exposed to many fall hazards that they are often not prepared to negotiate. Fall protection is used inconsistently and worksite mentorship is often inadequate. Foremen feel pressured to meet productivity demands and some are unsure of the fall protection requirements. After the training, the frequency of daily mentoring and toolbox talks increased, and these talks became more interactive and focused on hazardous daily work tasks. Foremen observed their worksites for fall hazards more often. We observed increased compliance with fall protection and decreased unsafe behaviors during worksite audits. Designing the training to meet both foremen's and crewmembers' needs ensured the training was learner-centered and contextually-relevant. This pilot suggests that training residential foremen can increase use of fall protection, improve safety behaviors, and enhance on-the-job training and safety communication at their worksites. Construction workers' training should target safety communication and mentoring skills with workers who will lead work crews. Interventions at multiple levels are necessary to increase safety compliance in residential construction and decrease falls

  17. A Method for Determining Optimal Residential Energy Efficiency Packages

    Energy Technology Data Exchange (ETDEWEB)

    Polly, B. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Gestwick, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bianchi, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Anderson, R. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Horowitz, S. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Christensen, C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Judkoff, R. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2011-04-01

    This report describes an analysis method for determining optimal residential energy efficiency retrofit packages and, as an illustrative example, applies the analysis method to a 1960s-era home in eight U.S. cities covering a range of International Energy Conservation Code (IECC) climate regions. The method uses an optimization scheme that considers average energy use (determined from building energy simulations) and equivalent annual cost to recommend optimal retrofit packages specific to the building, occupants, and location.

  18. Development and validation of fall risk screening tools for use in residential aged care facilities.

    Science.gov (United States)

    Delbaere, Kim; Close, Jacqueline C T; Menz, Hylton B; Cumming, Robert G; Cameron, Ian D; Sambrook, Philip N; March, Lyn M; Lord, Stephen R

    2008-08-18

    To develop screening tools for predicting falls in nursing home and intermediate-care hostel residents who can and cannot stand unaided. Prospective cohort study in residential aged care facilities in northern Sydney, New South Wales, June 1999-June 2003. 2005 people aged 65-104 years (mean +/- SD, 85.7+/-7.1 years). Demographic, health, and physical function assessment measures; number of falls over a 6-month period; validity of the screening models. Ability to stand unaided was identified as a significant event modifier for falls. In people who could stand unaided, having either poor balance or two of three other risk factors (previous falls, nursing home residence, and urinary incontinence) increased the risk of falling in the next 6 months threefold (sensitivity, 73%; specificity, 55%). In people who could not stand unaided, having any one of three risk factors (previous falls, hostel residence, and using nine or more medications) increased the risk of falling twofold (sensitivity, 87%; specificity, 29%). These two screening models are useful for identifying older people living in residential aged care facilities who are at increased risk of falls. The screens are easy to administer and contain items that are routinely collected in residential aged care facilities in Australia.

  19. Residential Consumer-Centric Demand-Side Management Based on Energy Disaggregation-Piloting Constrained Swarm Intelligence: Towards Edge Computing.

    Science.gov (United States)

    Lin, Yu-Hsiu; Hu, Yu-Chen

    2018-04-27

    The emergence of smart Internet of Things (IoT) devices has highly favored the realization of smart homes in a down-stream sector of a smart grid. The underlying objective of Demand Response (DR) schemes is to actively engage customers to modify their energy consumption on domestic appliances in response to pricing signals. Domestic appliance scheduling is widely accepted as an effective mechanism to manage domestic energy consumption intelligently. Besides, to residential customers for DR implementation, maintaining a balance between energy consumption cost and users’ comfort satisfaction is a challenge. Hence, in this paper, a constrained Particle Swarm Optimization (PSO)-based residential consumer-centric load-scheduling method is proposed. The method can be further featured with edge computing. In contrast with cloud computing, edge computing—a method of optimizing cloud computing technologies by driving computing capabilities at the IoT edge of the Internet as one of the emerging trends in engineering technology—addresses bandwidth-intensive contents and latency-sensitive applications required among sensors and central data centers through data analytics at or near the source of data. A non-intrusive load-monitoring technique proposed previously is utilized to automatic determination of physical characteristics of power-intensive home appliances from users’ life patterns. The swarm intelligence, constrained PSO, is used to minimize the energy consumption cost while considering users’ comfort satisfaction for DR implementation. The residential consumer-centric load-scheduling method proposed in this paper is evaluated under real-time pricing with inclining block rates and is demonstrated in a case study. The experimentation reported in this paper shows the proposed residential consumer-centric load-scheduling method can re-shape loads by home appliances in response to DR signals. Moreover, a phenomenal reduction in peak power consumption is achieved

  20. Residential Consumer-Centric Demand-Side Management Based on Energy Disaggregation-Piloting Constrained Swarm Intelligence: Towards Edge Computing

    Science.gov (United States)

    Hu, Yu-Chen

    2018-01-01

    The emergence of smart Internet of Things (IoT) devices has highly favored the realization of smart homes in a down-stream sector of a smart grid. The underlying objective of Demand Response (DR) schemes is to actively engage customers to modify their energy consumption on domestic appliances in response to pricing signals. Domestic appliance scheduling is widely accepted as an effective mechanism to manage domestic energy consumption intelligently. Besides, to residential customers for DR implementation, maintaining a balance between energy consumption cost and users’ comfort satisfaction is a challenge. Hence, in this paper, a constrained Particle Swarm Optimization (PSO)-based residential consumer-centric load-scheduling method is proposed. The method can be further featured with edge computing. In contrast with cloud computing, edge computing—a method of optimizing cloud computing technologies by driving computing capabilities at the IoT edge of the Internet as one of the emerging trends in engineering technology—addresses bandwidth-intensive contents and latency-sensitive applications required among sensors and central data centers through data analytics at or near the source of data. A non-intrusive load-monitoring technique proposed previously is utilized to automatic determination of physical characteristics of power-intensive home appliances from users’ life patterns. The swarm intelligence, constrained PSO, is used to minimize the energy consumption cost while considering users’ comfort satisfaction for DR implementation. The residential consumer-centric load-scheduling method proposed in this paper is evaluated under real-time pricing with inclining block rates and is demonstrated in a case study. The experimentation reported in this paper shows the proposed residential consumer-centric load-scheduling method can re-shape loads by home appliances in response to DR signals. Moreover, a phenomenal reduction in peak power consumption is achieved

  1. Residential Consumer-Centric Demand-Side Management Based on Energy Disaggregation-Piloting Constrained Swarm Intelligence: Towards Edge Computing

    Directory of Open Access Journals (Sweden)

    Yu-Hsiu Lin

    2018-04-01

    Full Text Available The emergence of smart Internet of Things (IoT devices has highly favored the realization of smart homes in a down-stream sector of a smart grid. The underlying objective of Demand Response (DR schemes is to actively engage customers to modify their energy consumption on domestic appliances in response to pricing signals. Domestic appliance scheduling is widely accepted as an effective mechanism to manage domestic energy consumption intelligently. Besides, to residential customers for DR implementation, maintaining a balance between energy consumption cost and users’ comfort satisfaction is a challenge. Hence, in this paper, a constrained Particle Swarm Optimization (PSO-based residential consumer-centric load-scheduling method is proposed. The method can be further featured with edge computing. In contrast with cloud computing, edge computing—a method of optimizing cloud computing technologies by driving computing capabilities at the IoT edge of the Internet as one of the emerging trends in engineering technology—addresses bandwidth-intensive contents and latency-sensitive applications required among sensors and central data centers through data analytics at or near the source of data. A non-intrusive load-monitoring technique proposed previously is utilized to automatic determination of physical characteristics of power-intensive home appliances from users’ life patterns. The swarm intelligence, constrained PSO, is used to minimize the energy consumption cost while considering users’ comfort satisfaction for DR implementation. The residential consumer-centric load-scheduling method proposed in this paper is evaluated under real-time pricing with inclining block rates and is demonstrated in a case study. The experimentation reported in this paper shows the proposed residential consumer-centric load-scheduling method can re-shape loads by home appliances in response to DR signals. Moreover, a phenomenal reduction in peak power

  2. GridLAB-D Technical Support Document: Residential End-Use Module Version 1.0

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, Zachary T.; Gowri, Krishnan; Katipamula, Srinivas

    2008-07-31

    1.0 Introduction The residential module implements the following end uses and characteristics to simulate the power demand in a single family home: • Water heater • Lights • Dishwasher • Range • Microwave • Refrigerator • Internal gains (plug loads) • House (heating/cooling loads) The house model considers the following four major heat gains/losses that contribute to the building heating/cooling load: 1. Conduction through exterior walls, roof and fenestration (based on envelope UA) 2. Air infiltration (based on specified air change rate) 3. Solar radiation (based on CLTD model and using tmy data) 4. Internal gains from lighting, people, equipment and other end use objects. The Equivalent Thermal Parameter (ETP) approach is used to model the residential loads and energy consumption. The following sections describe the modeling assumptions for each of the above end uses and the details of power demand calculations in the residential module.

  3. Analysis of Illinois Home Performance with ENERGY STAR(R) Measure Packages

    Energy Technology Data Exchange (ETDEWEB)

    Baker, J.; Yee, S.; Brand, L.

    2013-09-01

    Through the Chicagoland Single Family Housing Characterization and Retrofit Prioritization report, the Partnership for Advanced Residential Retrofit characterized 15 housing types in the Chicagoland region based on assessor data, utility billing history, and available data from prior energy efficiency programs. Within these 15 groups, a subset showed the greatest opportunity for energy savings based on BEopt Version 1.1 modeling of potential energy efficiency package options and the percent of the housing stock represented by each group. In this project, collected field data from a whole-home program in Illinois are utilized to compare marketplace-installed measures to the energy saving optimal packages previously developed for the 15 housing types. Housing type, conditions, energy efficiency measures installed, and retrofit cost information were collected from 19 homes that participated in the Illinois Home Performance with ENERGY STAR program in 2012, representing eight of the characterized housing groups. Two were selected for further case study analysis to provide an illustration of the differences between optimal and actually installed measures. Taken together, these homes are representative of 34.8% of the Chicagoland residential building stock. In one instance, actual installed measures closely matched optimal recommended measures.

  4. Healthcare costs of burn patients from homes without fire sprinklers.

    Science.gov (United States)

    Banfield, Joanne; Rehou, Sarah; Gomez, Manuel; Redelmeier, Donald A; Jeschke, Marc G

    2015-01-01

    The treatment of burn injuries requires high-cost services for healthcare and society. Automatic fire sprinklers are a preventive measure that can decrease fire injuries, deaths, property damage, and environmental toxins. This study's aim was to conduct a cost analysis of patients with burn or inhalation injuries caused by residential fires and to compare this with the cost of implementing residential automatic fire sprinklers. We conducted a cohort analysis of adult burn patients admitted to our provincial burn center (1995-2012). Patient demographics and injury characteristics were collected from medical records and clinical and coroner databases. Resource costs included average cost per day at our intensive care and rehabilitation program, transportation, and property loss. During the study period, there were 1557 residential fire-related deaths province-wide and 1139 patients were admitted to our provincial burn center as a result of a flame injury occurring at home. At our burn center, the average cost was CAN$84,678 per patient with a total cost of CAN$96,448,194. All resources totaled CAN$3,605,775,200. This study shows the considerable healthcare costs of burn patients from homes without fire sprinklers.

  5. Preliminary assessment of the Louisiana Home Energy Rebate Offer program using IPMVP guidelines

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, Mark J.; Pulsipher, Allan G. [Center for Energy Studies, Louisiana State University, Energy Coast and Environment Building, Nicholson Extension Drive, Baton Rouge, LA 70803 (United States)

    2010-02-15

    The Louisiana Home Energy Rebate Offer (HERO) is a residential energy conservation program established in 1999 to provide rebates for qualified applicants to build new homes that are more energy efficient or improve the energy efficiency of existing homes. Energy conservation programs require careful evaluation because of the high cost to implement the measures and the expectation that they will reduce energy use. The purpose of this paper is to demonstrate that residential energy conservation measures in a hot and humid climate can be evaluated using the International Performance Measurement and Verification Protocol (IPMVP), a best practice methodology commonly used in industrial and commercial performance-based contracts, but rarely, if ever, applied to residential programs. Using a random sample of 60 HERO participants, we were able to construct statistically significant electricity consumption baseline models for 90% of households. We determined that more than half of the sample participants consumed more electricity after their efficiency improvement, with an average net household savings of 172 kWh/yr, about 1% pre-retrofit consumption. A description of the baseline model construction, preliminary program evaluation, and recommendations are provided. All program conclusions are considered preliminary until a larger and more comprehensive study is conducted. (author)

  6. Preliminary assessment of the Louisiana Home Energy Rebate Offer program using IPMVP guidelines

    International Nuclear Information System (INIS)

    Kaiser, Mark J.; Pulsipher, Allan G.

    2010-01-01

    The Louisiana Home Energy Rebate Offer (HERO) is a residential energy conservation program established in 1999 to provide rebates for qualified applicants to build new homes that are more energy efficient or improve the energy efficiency of existing homes. Energy conservation programs require careful evaluation because of the high cost to implement the measures and the expectation that they will reduce energy use. The purpose of this paper is to demonstrate that residential energy conservation measures in a hot and humid climate can be evaluated using the International Performance Measurement and Verification Protocol (IPMVP), a best practice methodology commonly used in industrial and commercial performance-based contracts, but rarely, if ever, applied to residential programs. Using a random sample of 60 HERO participants, we were able to construct statistically significant electricity consumption baseline models for 90% of households. We determined that more than half of the sample participants consumed more electricity after their efficiency improvement, with an average net household savings of 172 kWh/yr, about 1% pre-retrofit consumption. A description of the baseline model construction, preliminary program evaluation, and recommendations are provided. All program conclusions are considered preliminary until a larger and more comprehensive study is conducted.

  7. Wood energy for residential heating in Alaska: current conditions, attitudes, and expected use

    Science.gov (United States)

    David L. Nicholls; Allen M. Brackley; Valerie. Barber

    2010-01-01

    This study considered three aspects of residential wood energy use in Alaska: current conditions and fuel consumption, knowledge and attitudes, and future use and conditions. We found that heating oil was the primary fuel for home heating in southeast and interior Alaska, whereas natural gas was used most often in south-central Alaska (Anchorage). Firewood heating...

  8. Prevalence of Weight Problems among Youth with High-Incidence Disabilities in Residential Care

    Science.gov (United States)

    Trout, Alexandra L.; Lambert, Matthew C.; Nelson, Timothy D.; Thompson, Ronald W.

    2014-01-01

    The prevalence of weight problems among youth in general and youth in out-of-home care has been well documented; however, the prevalence of obesity/overweight among youth with high-incidence disabilities in more restrictive settings, such as residential care, has not been assessed. The purpose of the present study was to evaluate the prevalence of…

  9. A three-dimensional model of residential energy consumer archetypes for local energy policy design in the UK

    International Nuclear Information System (INIS)

    Zhang Tao; Siebers, Peer-Olaf; Aickelin, Uwe

    2012-01-01

    This paper reviews major studies in three traditional lines of research in residential energy consumption in the UK, i.e., economic/infrastructure, behaviour, and load profiling. Based on the review the paper proposes a three-dimensional model for archetyping residential energy consumers in the UK by considering property energy efficiency levels, the greenness of household behaviour of using energy, and the duration of property daytime occupancy. With the proposed model, eight archetypes of residential energy consumers in the UK have been identified. They are: pioneer greens, follower greens, concerned greens, home stayers, unconscientious wasters, regular wasters, daytime wasters, and disengaged wasters. Using a case study, these archetypes of residential energy consumers demonstrate the robustness of the 3-D model in aiding local energy policy/intervention design in the UK. - Highlights: ► This paper reviews the three traditional lines of research in residential energy consumption in the UK. ► Based on the literature review, the paper proposes a 3-D conceptual model for archetyping UK residential energy consumers. ► The 3-D archetype model can aid local energy policy/intervention design in the UK.

  10. Particulate-bound polycyclic aromatic hydrocarbon sources and determinants in residential homes.

    Science.gov (United States)

    Cattaneo, Andrea; Fermo, Paola; Urso, Patrizia; Perrone, Maria Grazia; Piazzalunga, Andrea; Tarlassi, Jessica; Carrer, Paolo; Cavallo, Domenico Maria

    2016-11-01

    Human exposure to polycyclic aromatic hydrocarbons (PAHs) in indoor environments can be particularly relevant because people spend most of their time inside buildings, especially in homes. This study aimed to investigate the most important particle-bound PAH sources and exposure determinants in PM 2.5 samples collected in 19 homes located in northern Italy. Complementary information about ion content in PM 10 was also collected in 12 of these homes. Three methods were used for the identification of PAH sources and determinants: diagnostic ratios with principal component and hierarchical cluster analyses (PCA and HCA), chemical mass balance (CMB) and linear mixed models (LMMs). This combined and tiered approach allowed the infiltration of outdoor PAHs into indoor environments to be identified as the most important source in winter, with a relevant role played by biomass burning and traffic exhausts to be identified as a general source of PAHs in both seasons. Tobacco smoke exhibited an important impact on PAH levels in smokers' homes, whereas in the whole sample, cooking food and natural gas sources played a minor or negligible role. Nitrate, sulfate and ammonium were the main inorganic constituents of indoor PM 10 owing to the secondary formation of ammonium sulfates and nitrates. Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. A narrative exploration of older people's transitions into residential care.

    Science.gov (United States)

    Lee, Victoria S P; Simpson, Jane; Froggatt, Katherine

    2013-01-01

    Moving into residential care has been argued to be a significant life transition for older people, often resulting in stress and anxiety. This research aimed to explore qualitatively older people's experiences of this transition, including how relocation is reflected upon and incorporated into their personal narratives. Eight older adults (65-97 years) living in a residential facility for between three and 12 months participated in interviews focussed on their experiences of relocating to a residential care home. Narrative analysis revealed that rather than depicting time bound stages of transition, participants' experiences reflected key plots of 'control', 'power', 'identity' and 'uncertainty' interwoven throughout their narratives. Participants experienced some difficulties in incorporating this transition into their life stories. Furthermore, participants discussed not feeling confident in their decision to move, living in constant fear of losing their memory, and limited expectations for their future. Professionals should move away from considering transition as a stage-based process ending in acceptance, instead focussing on how residents perceive relocation in relation to previous life experiences, unspoken fears evoked by moving and how the environment and relationships with staff may be altered to assist residents in maintaining their identity and sense of control.

  12. Best practices guide for residential HVAC Retrofits

    Energy Technology Data Exchange (ETDEWEB)

    Walker, Iain S.

    2003-08-11

    This best practices guide for residential HVAC system retrofits is aimed at contractors who want guidance on delivering energy efficient, cost effective and innovative products. It has been developed around the idea of having packages of changes to the building HVAC system and building envelope that are climate and house construction dependent. These packages include materials, procedures and equipment and are designed to remove some of the guesswork from a builder, contractor, installer or homeowner decisions about how best to carry out HVAC changes. The packages are not meant to be taken as rigid requirements--instead they are systems engineered guidelines that form the basis for energy efficient retrofits. Similar approaches have been taken previously for new construction to develop extremely energy efficient homes that are comfortable safe and durable, and often cost less than standard construction. This is best epitomized by the Building America program whose partners have built thousands of residences throughout the U.S. using these principles. The differences between retrofitting and new construction tend to limit the changes one can make to a building, so these packages rely on relatively simple and non-intrusive technologies and techniques. The retrofits also focus on changes to a building that will give many years of service to the occupants. Another key aspect of these best practices is that we need to know how a house is working so that we know what parts have the potential for improvement. To do this we have put together a set of diagnostic tools that combine physical measurements and checklists/questionnaires. The measured test results, observations and homeowner answers to questions are used to direct us towards the best retrofits applicable to each individual house. The retrofits will depend on the current condition of the building envelope and HVAC system, the local climate, the construction methods used for the house, and the presence of various

  13. Collective Value Creation and Empowerment in an Online Brand Community: A Netnographic Study on LEGO Builders

    Directory of Open Access Journals (Sweden)

    Pekka Tuominen

    2012-06-01

    Full Text Available Online communities are becoming “places” of belonging, information, and emotional support that people cannot do without. These social groups have a real existence for their participants, and thus have consequential effects on many aspects of behaviour. This article examines collective value creation and empowerment in an online brand community. It presents the main features of an online brand community, the process of value co-creation, and motivators for participating in online brand communities. These key factors jointly characterize collective value creation and empowerment. This netnographic study focuses on an online brand community called BrickBuilders, which is a meeting place for LEGO builders in Finland. BrickBuilders’ members feel a sense of belonging, they share similar motivations, and they create value together.

  14. Networking Technologies for Future Home Networks Using 60 GHz Radio

    OpenAIRE

    Wang, J.

    2010-01-01

    Networking technologies have been changing the life of people in their private residential space. With the arrival of high definition (HD) multimedia services and broadband communications into the living space, future home networks are expected to support high speed device-to-device connectivity with Quality-of-Service (QoS) provisioning. There is no prize for guessing that it has to be wireless communication which creates maximal freedom. Nevertheless, it is doubtful that today's home networ...

  15. Residential exposures to pesticides and childhood leukaemia

    International Nuclear Information System (INIS)

    Metayer, C.; Buffler, P. A.

    2008-01-01

    Like many chemicals, carcinogenicity of pesticides is poorly characterised in humans, especially in children, so that the present knowledge about childhood leukaemia risk derives primarily from epidemiological studies. Overall, case-control studies published in the last decade have reported positive associations with home use of insecticides, mostly before the child's birth, while findings for herbicides are mixed. Previous studies relied solely on self-reports, therefore lacking information on active ingredients and effects of potential recall bias. Few series to date have examined the influence of children's genetic susceptibility related to transport and metabolism of pesticides. To overcome these limitations, investigators of the Northern California Childhood Leukaemia Study (NCCLS) have undertaken, in collaboration with a multidisciplinary team, a comprehensive assessment of residential pesticide exposure, including: (1) quality control of self-reports; (2) home pesticide inventory and linkage to the Environmental Protection Agency to obtain data on active ingredients; (3) collection and laboratory analyses of ∼600 home dust samples for over 60 pesticides and (4) geographic information studies using California environmental databases to assess exposure to agricultural pesticides. The NCCLS is also conducting large-scale geno-typing to evaluate the role of genes in xenobiotic pathways relevant to the transport and metabolism of pesticides. A better quantification of children's exposures to pesticides at home is critical to the evaluation of childhood leukaemia risk, especially for future gene-environment interaction studies. (authors)

  16. Assessment of impact of construction materials on the ecological safety of home

    Directory of Open Access Journals (Sweden)

    Zhigulina Anna

    2017-01-01

    Full Text Available The article deals with the problems of creating environmentally friendly aerial environment within residential premises. The main sources causing air pollution of urban housing are determined and classified. The origins of air pollution sources of residential premises are adopted as the classifying criterion. The sources of contamination are defined and assessed. Particular attention is paid to the choice of environmentally friendly building materials. The methodology for assessing toxicity of industrial waste used in the production of housing materials is developed to assess the comfort and environmental safety of home. The idea of creating “Residential buldings ID” containing information on the construction materials used is introduced.

  17. Reducing Energy Use in Existing Homes by 30%: Learning From Home Performance with ENERGY STAR

    Energy Technology Data Exchange (ETDEWEB)

    Liaukus, C. [Building America Research Alliance (BARA), Kent, WA (United States)

    2014-12-01

    The improvement of existing homes in the United States can have a much greater impact on overall residential energy use than the construction of highly efficient new homes. There are over 130 million existing housing units in the U.S., while annually new construction represents less than two percent of the total supply (U.S. Census Bureau, 2013). Therefore, the existing housing stock presents a clear opportunity and responsibility for Building America (BA) to guide the remodeling and retrofit market toward higher performance existing homes. There are active programs designed to improve the energy performance of existing homes. Home Performance with ENERGY STAR (HPwES) is a market-rate program among them. BARA's research in this project verified that the New Jersey HPwES program is achieving savings in existing homes that meet or exceed BA's goal of 30%. Among the 17 HPwES projects with utility data included in this report, 15 have actual energy savings ranging from 24% to 46%. Further, two of the homes achieved that level of energy savings without the costly replacement of heating and cooling equipment, which indicates that less costly envelope packages could be offered to consumers unable to invest in more costly mechanical packages, potentially creating broader market impact.

  18. The ATLAS high level trigger region of interest builder

    International Nuclear Information System (INIS)

    Blair, R.; Dawson, J.; Drake, G.; Haberichter, W.; Schlereth, J.; Zhang, J.; Ermoline, Y.; Pope, B.; Aboline, M.; High Energy Physics; Michigan State Univ.

    2008-01-01

    This article describes the design, testing and production of the ATLAS Region of Interest Builder (RoIB). This device acts as an interface between the Level 1 trigger and the high level trigger (HLT) farm for the ATLAS LHC detector. It distributes all of the Level 1 data for a subset of events to a small number of (16 or less) individual commodity processors. These processors in turn provide this information to the HLT. This allows the HLT to use the Level 1 information to narrow data requests to areas of the detector where Level 1 has identified interesting objects

  19. Securing a Home Energy Managing Platform

    DEFF Research Database (Denmark)

    Mikkelsen, Søren Aagaard; Jacobsen, Rune Hylsberg

    2016-01-01

    Energy management in households gets increasingly more attention in the struggle to integrate more sustainable energy sources. Especially in the electrical system, smart grid towards a better utilisation of the energy production and distribution infrastructure. The Home Energy Management System...... (HEMS) is a critical infrastructure component in this endeavour. Its main goal is to enable energy services utilising smart devices in the households based on the interest of the residential consumers and external actors. With the role of being both an essential link in the communication infrastructure...... for balancing the electrical grid and a surveillance unit in private homes, security and privacy become essential to address. In this chapter, we identify and address potential threats Home Energy Management Platform (HEMP) developers should consider in the progress of designing architecture, selecting hardware...

  20. A systematic review of communication strategies for people with dementia in residential and nursing homes.

    Science.gov (United States)

    Vasse, Emmelyne; Vernooij-Dassen, Myrra; Spijker, Anouk; Rikkert, Marcel Olde; Koopmans, Raymond

    2010-03-01

    The impairment of verbal skills of people with dementia challenges communication. The aim of this review was to study the effects of nonpharmacological interventions in residential and nursing homes on (1) communication between residents with dementia and care staff, and (2) the neuropsychiatric symptoms of residents with dementia. Pubmed, PsychInfo, Web of Science, the Cochrane Library, and reference lists from relevant publications were systematically searched to find articles about controlled interventions with communication strategies. The data collected were pooled and subjected to a meta-analysis. Nineteen intervention studies were selected for this review. They included structured and communicative "sessions at set times" for residents (e.g. life review) and communication techniques in activities of "daily care" applied by care staff (e.g. sensitivity to nonverbal communication). A meta-analysis of five set-time interventions (communication) and another meta-analysis of four set-time interventions (neuropsychiatric outcomes) found no significant overall effects. Individual set-time intervention studies report positive effects on communication when interventions are single-task sessions, like life review or one-on-one conversation. Interventions around daily care activities had positive effects on communication outcomes. Effects of both types of interventions on neuropsychiatric symptoms were divergent. This review indicates that care staff can improve their communication with residents with dementia when strategies are embedded in daily care activities or interventions are single-task sessions at set times. These results offer the possibility of improving the quality of care, but not of directly reducing neuropsychiatric symptoms. More research is needed to study the effect of communication interventions on neuropsychiatric symptoms.

  1. Supplement consumption in body builder athletes

    Science.gov (United States)

    Karimian, Jahangir; Esfahani, Parivash Shekarchizadeh

    2011-01-01

    BACKGROUND: Widespread use of supplements is observed among world athletes in different fields. The aim of this study was to estimate the prevalence and determinants of using supplements among body builder athletes. METHODS: This cross-sectional study was conducted on 250 men and 250 women from 30 different bodybuilding clubs. Participants were asked to complete a self-administered standardized anonymous check-list. RESULTS: Forty nine percent of the respondents declared supplement use. Men were more likely to take supplements than women (86.8% vs. 11.2%, p = 0.001). Reasons for using supplements were reported to be for health (45%), enhancing the immune system (40%) and improving athletic performance (25%). Most athletes (72%) had access to a nutritionist but underused this resource. Coaches (65%) had the greatest influence on supplementation practices followed by nutritionists (30%) and doctors (25%) after them. CONCLUSIONS: The prevalence of supplement use among bodybuilders was high. Sex, health-related issues and sport experts were determinant factors of supplement use. PMID:22973330

  2. Multi-agent system architecture for smart home energy optimization

    NARCIS (Netherlands)

    Asare-Bediako, B.; Kling, W.L.; Ribeiro, P.F.

    2013-01-01

    The smart grid concept is not limited to the public network but it is also envisioned in the residential setting. The integration of automation technologies into home is being driven by comfort and economic benefits to homeowners. The shift towards dynamic electricity pricing and demand response

  3. Estimation of bias with the single-zone assumption in measurement of residential air exchange using the perfluorocarbon tracer gas method.

    Science.gov (United States)

    Van Ryswyk, K; Wallace, L; Fugler, D; MacNeill, M; Héroux, M È; Gibson, M D; Guernsey, J R; Kindzierski, W; Wheeler, A J

    2015-12-01

    Residential air exchange rates (AERs) are vital in understanding the temporal and spatial drivers of indoor air quality (IAQ). Several methods to quantify AERs have been used in IAQ research, often with the assumption that the home is a single, well-mixed air zone. Since 2005, Health Canada has conducted IAQ studies across Canada in which AERs were measured using the perfluorocarbon tracer (PFT) gas method. Emitters and detectors of a single PFT gas were placed on the main floor to estimate a single-zone AER (AER(1z)). In three of these studies, a second set of emitters and detectors were deployed in the basement or second floor in approximately 10% of homes for a two-zone AER estimate (AER(2z)). In total, 287 daily pairs of AER(2z) and AER(1z) estimates were made from 35 homes across three cities. In 87% of the cases, AER(2z) was higher than AER(1z). Overall, the AER(1z) estimates underestimated AER(2z) by approximately 16% (IQR: 5-32%). This underestimate occurred in all cities and seasons and varied in magnitude seasonally, between homes, and daily, indicating that when measuring residential air exchange using a single PFT gas, the assumption of a single well-mixed air zone very likely results in an under prediction of the AER. The results of this study suggest that the long-standing assumption that a home represents a single well-mixed air zone may result in a substantial negative bias in air exchange estimates. Indoor air quality professionals should take this finding into consideration when developing study designs or making decisions related to the recommendation and installation of residential ventilation systems. © 2014 Her Majesty the Queen in Right of Canada. Indoor Air published by John Wiley & Sons Ltd Reproduced with the permission of the Minister of Health Canada.

  4. Networking Technologies for Future Home Networks Using 60 GHz Radio

    NARCIS (Netherlands)

    Wang, J.

    2010-01-01

    Networking technologies have been changing the life of people in their private residential space. With the arrival of high definition (HD) multimedia services and broadband communications into the living space, future home networks are expected to support high speed device-to-device connectivity

  5. DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Albuquerque, New Mexico

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-09-01

    Palo Duro uses advanced framing techniques like 2x6 24-inch on-center framing, open headers above windows on non-load-bearing walls, 2-stud corners, ladder blocking where walls intersect, and single top and bottom plates. These techniques reduce the amount of lumber in the wall, allowing more room for insulation and reducing costs and installation time. The builder garnered a 2013 Housing Innovation Award in the production builder category.

  6. Market segmentation and analysis of Japan's residential post and beam construction market.

    Science.gov (United States)

    Joseph A. Roos; Ivan L. Eastin; Hisaaki Matsuguma

    2005-01-01

    A mail survey of Japanese post and beam builders was conducted to measure their level of ethnocentrism, market orientation, risk aversion, and price consciousness. The data were analyzed utilizing factor and cluster analysis. The results showed that Japanese post and beam builders can be divided into three distinct market segments: open to import...

  7. Design of a Reliable Hybrid (PV/Diesel Power System with Energy Storage in Batteries for Remote Residential Home

    Directory of Open Access Journals (Sweden)

    Vincent Anayochukwu Ani

    2016-01-01

    Full Text Available This paper reports the experience acquired with a photovoltaic (PV hybrid system simulated as an alternative to diesel system for a residential home located in Southern Nigeria. The hybrid system was designed to overcome the problem of climate change, to ensure a reliable supply without interruption, and to improve the overall system efficiency (by the integration of the battery bank. The system design philosophy was to maximize simplicity; hence, the system was sized using conventional simulation tool and representative insolation data. The system includes a 15 kW PV array, 21.6 kWh (3600 Ah worth of battery storage, and a 5.4 kW (6.8 kVA generator. The paper features a detailed analysis of the energy flows through the system and quantifies all losses caused by PV charge controller, battery storage round-trip, rectifier, and inverter conversions. In addition, simulation was run to compare PV/diesel/battery with diesel/battery and the results show that the capital cost of a PV/diesel hybrid solution with batteries is nearly three times higher than that of a generator and battery combination, but the net present cost, representing cost over the lifetime of the system, is less than one-half of the generator and battery combination.

  8. Health status of UK care home residents: a cohort study.

    Science.gov (United States)

    Gordon, Adam Lee; Franklin, Matthew; Bradshaw, Lucy; Logan, Pip; Elliott, Rachel; Gladman, John R F

    2014-01-01

    UK care home residents are often poorly served by existing healthcare arrangements. Published descriptions of residents' health status have been limited by lack of detail and use of data derived from surveys drawn from social, rather than health, care records. to describe in detail the health status and healthcare resource use of UK care home residents a 180-day longitudinal cohort study of 227 residents across 11 UK care homes, 5 nursing and 6 residential, selected to be representative for nursing/residential status and dementia registration. Barthel index (BI), Mini-mental state examination (MMSE), Neuropsychiatric index (NPI), Mini-nutritional index (MNA), EuroQoL-5D (EQ-5D), 12-item General Health Questionnaire (GHQ-12), diagnoses and medications were recorded at baseline and BI, NPI, GHQ-12 and EQ-5D at follow-up after 180 days. National Health Service (NHS) resource use data were collected from databases of local healthcare providers. out of a total of 323, 227 residents were recruited. The median BI was 9 (IQR: 2.5-15.5), MMSE 13 (4-22) and number of medications 8 (5.5-10.5). The mean number of diagnoses per resident was 6.2 (SD: 4). Thirty per cent were malnourished, 66% had evidence of behavioural disturbance. Residents had contact with the NHS on average once per month. residents from both residential and nursing settings are dependent, cognitively impaired, have mild frequent behavioural symptoms, multimorbidity, polypharmacy and frequently use NHS resources. Effective care for such a cohort requires broad expertise from multiple disciplines delivered in a co-ordinated and managed way.

  9. Retrofit and preoccupancy radon mitigation program for homes

    International Nuclear Information System (INIS)

    Ibach, M.T.; Gallagher, J.H. Jr.

    1987-01-01

    A requirement was levied on a Maryland builder by the FHA to demonstrate acceptable radon levels in his homes before they would be approved for loans. This paper describes the use of products shown by appropriate tests to be effective radon barriers to meet this requirement. The sheet goods can be used in exterior and interior applications on foundation walls. The other is applied to the interior floors and/or walls of the basement area. Product installation procedures are straightforward and relatively simple. Problems encountered were routine and concerned primarily the complete sealing of floor and wall penetrations, window openings, sealing the top of the wall under the sill plate, and the location and mounting of permanent fixtures on walls and floors. Also discussed are methods of repairing ruptures of the seal, warranties to protect the homeowner, support systems and costs. Conclusions are that effective reductions in radon levels can be achieved by the application of sealants during the construction of new homes or as a retrofit to existing structures

  10. Evaluation of Cellular Shades in the PNNL Lab Homes

    Energy Technology Data Exchange (ETDEWEB)

    Petersen, Joseph M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sullivan, Greg [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Cort, Katherine A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Metzger, Cheryn E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Merzouk, Massine [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-11-01

    This report examines the energy performance of cellular shade window coverings in a matched pair of all-electric, factory-built “Lab Homes” located on the Pacific Northwest National Laboratory (PNNL) campus in Richland, Washington. The 1500-square-foot homes were identical in construction and baseline performance, which allowed any difference in energy and thermal performance between the baseline home and the experimental home to be attributed to the retrofit technology installed in the experimental home. To assess the performance of high efficiency window attachments in a residential retrofit application, the building shell air leakage, energy use, and interior temperatures of each home were compared during the 2015 -2016 winter heating and summer cooling seasons. Hunter Douglas Duette® Architella® Trielle™ opaque honeycomb “cellular” shades were installed over double-pane clear-glass, aluminum-frame primary windows in the experimental home and were compared to identical primary windows with no window coverings and with standard typical white vinyl horizontal blind window coverings in the baseline home.

  11. VQone MATLAB toolbox: A graphical experiment builder for image and video quality evaluations: VQone MATLAB toolbox.

    Science.gov (United States)

    Nuutinen, Mikko; Virtanen, Toni; Rummukainen, Olli; Häkkinen, Jukka

    2016-03-01

    This article presents VQone, a graphical experiment builder, written as a MATLAB toolbox, developed for image and video quality ratings. VQone contains the main elements needed for the subjective image and video quality rating process. This includes building and conducting experiments and data analysis. All functions can be controlled through graphical user interfaces. The experiment builder includes many standardized image and video quality rating methods. Moreover, it enables the creation of new methods or modified versions from standard methods. VQone is distributed free of charge under the terms of the GNU general public license and allows code modifications to be made so that the program's functions can be adjusted according to a user's requirements. VQone is available for download from the project page (http://www.helsinki.fi/psychology/groups/visualcognition/).

  12. Methodology and assumptions for evaluating heating and cooling energy requirements in new single-family residential buildings: Technical support document for the PEAR (Program for Energy Analysis of Residences) microcomputer program

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Y.J.; Ritschard, R.; Bull, J.; Byrne, S.; Turiel, I.; Wilson, D.; Hsui, C.; Foley, D.

    1987-01-01

    This report provides technical documentation for a software package called PEAR (Program for Energy Analysis of Residences) developed by LBL. PEAR offers an easy-to-use and accurate method of estimating the energy savings associated with various energy conservation measures used in site-built, single-family homes. This program was designed for use by non-technical groups such as home builders, home buyers or others in the buildings industry, and developed as an integral part of a set of voluntary guidelines entitled Affordable Housing Through Energy Conservation: A Guide to Designing and Constructing Energy Efficient Homes. These guidelines provide a method for selecting and evaluating cost-effective energy conservation measures based on the energy savings estimated by PEAR. This work is part of a Department of Energy program aimed at conducting research that will improve the energy efficiency of the nation's stock of conventionally-built and manufactured homes, and presenting the results to the public in a simplified format.

  13. Residential aged care in Auckland, New Zealand 1988-2008: do real trends over time match predictions?

    Science.gov (United States)

    Broad, Joanna B; Boyd, Michal; Kerse, Ngaire; Whitehead, Noeline; Chelimo, Carol; Lay-Yee, Roy; von Randow, Martin; Foster, Susan; Connolly, Martin J

    2011-07-01

    in Auckland, New Zealand in 1988, 7.7% of those aged over 65 years lived in licenced residential aged care. Age-specific rates approximately doubled for each 5-year age group after the age of 65 years. Even with changes in policies and market forces since 1988, population increases are forecast to drive large growth in demand. This study shows previously unrecognised 20-year trends in rates of care in a geographically defined population. four cross-sectional surveys of all facilities (rest homes and hospitals) licenced for long-term care of older people were conducted in Auckland, New Zealand in 1988, 1993, 1998 and 2008. Facility staff completed survey forms for each resident. Numbers of licenced and occupied beds and trends in age-specific and age-standardised rates in residential aged care are reported. over the 20-year period, Auckland's population aged over 65 years increased by 43% (from 91,000 to 130,000) but actual numbers in care reduced slightly. Among those aged over 65 years, the proportion living in care facilities reduced from 1 in 13 to 1 in 18. Age-standardised rates in rest-home level care reduced from 65 to 33 per thousand, and in hospital level care, from 29 to 23 per thousand. Had rates remained stable, over 13,200 people, 74% more than observed, would have been in care in 2008. growth predicted in the residential aged care sector is not yet evident. The introduction of standardised needs assessments before entry, increased availability of home-based services, and growth in retirement villages may have led to reduced utilisation.

  14. Efficient Energy Management for a Grid-Tied Residential Microgrid

    DEFF Research Database (Denmark)

    Anvari-Moghaddam, Amjad; Guerrero, Josep M.; Quintero, Juan Carlos Vasquez

    2017-01-01

    In this paper, an effective energy management system (EMS) for application in integrated building and microgrid system is introduced and implemented as a multi-objective optimization problem. The proposed architecture covers different key modelling aspects such as distributed heat and electricity......’s objectives, the effectiveness and applicability of the proposed model is studied and validated compared to the existing residential EMSs. The simulation results demonstrate that the proposed EMS has the capability not only to conserve energy in sustainable homes and microgrid system and to reduce energy...

  15. Residential Feedback Devices and Programs. Opportunities for Natural Gas

    Energy Technology Data Exchange (ETDEWEB)

    Kerr, R. [Building America Partnership for Improved Residential Construction (BA-PIRC), Cocoa, FL (United States); Tondro, M. [Building America Partnership for Improved Residential Construction (BA-PIRC), Cocoa, FL (United States)

    2012-12-01

    Behavior-based approaches have been a growing interest in the energy efficiency field over recent years and the use of residential energy feedback has garnered particular interest. By providing an increased level of detail, feedback can greatly increase a consumer’s understanding of how energy is used in their home. This project reviewed the existing body of research on electricity feedback to identify parallel lessons for gas, discussed the benefits and challenges of different types of feedback, and identifying three feedback options that show strong potential for natural gas savings.

  16. Residential Feedback Devices and Programs: Opportunities for Natural Gas

    Energy Technology Data Exchange (ETDEWEB)

    Kerr, R.; Tondro, M.

    2012-12-01

    Behavior-based approaches have been a growing interest in the energy efficiency field over recent years and the use of residential energy feedback has garnered particular interest. By providing an increased level of detail, feedback can greatly increase a consumer's understanding of how energy is used in their home. This project reviewed the existing body of research on electricity feedback to identify parallel lessons for gas, discussed the benefits and challenges of different types of feedback, and identifying three feedback options that show strong potential for natural gas savings.

  17. Optimizing Hydronic System Performance in Residential Applications

    Energy Technology Data Exchange (ETDEWEB)

    Arena, L.; Faakye, O.

    2013-10-01

    Even though new homes constructed with hydronic heat comprise only 3% of the market (US Census Bureau 2009), of the 115 million existing homes in the United States, almost 14 million of those homes (11%) are heated with steam or hot water systems according to 2009 US Census data. Therefore, improvements in hydronic system performance could result in significant energy savings in the US. When operating properly, the combination of a gas-fired condensing boiler with baseboard convectors and an indirect water heater is a viable option for high-efficiency residential space heating in cold climates. Based on previous research efforts, however, it is apparent that these types of systems are typically not designed and installed to achieve maximum efficiency. Furthermore, guidance on proper design and commissioning for heating contractors and energy consultants is hard to find and is not comprehensive. Through modeling and monitoring, CARB sought to determine the optimal combination(s) of components - pumps, high efficiency heat sources, plumbing configurations and controls - that result in the highest overall efficiency for a hydronic system when baseboard convectors are used as the heat emitter. The impact of variable-speed pumps on energy use and system performance was also investigated along with the effects of various control strategies and the introduction of thermal mass.

  18. Short Paper: Frequency Regulation Services from Connected Residential Devices: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Baker, Kyri; Jin, Xin; Vaidhynathan, Deepthi; Jones, Wesley; Christensen, Dane; Sparn, Bethany; Woods, Jason; Sorensen, Harry; Lunacek, Monte

    2017-01-01

    In this paper, we demonstrate the potential benefits that residential buildings can provide for frequency regulation services in the electric power grid. In a hardware-in-the- loop (HIL) implementation, simulated homes along with a physical laboratory home are coordinated via a grid aggregator, and it is shown that their aggregate response has the potential to follow the regulation signal on a timescale of seconds. Connected (communication-enabled), devices in the National Renewable Energy Laboratory's (NREL's) Energy Systems Integration Facility (ESIF) received demand response (DR) requests from a grid aggregator, and the devices responded accordingly to meet the signal while satisfying user comfort bounds and physical hardware limitations. Future research will address the issues of cybersecurity threats, participation rates, and reducing equipment wear-and-tear while providing grid services.

  19. Mitigating residential exposure to secondhand tobacco smoke

    Science.gov (United States)

    Klepeis, Neil E.; Nazaroff, William W.

    In a companion paper, we used a simulation model to explore secondhand tobacco smoke (SHS) exposures for typical conditions in residences. In the current paper, we extend this analysis to evaluate the effectiveness of physical mitigation approaches in reducing nonsmokers' exposure to airborne SHS particulate matter in a hypothetical 6-zone house. Measures investigated included closing doors or opening windows in response to smoking activity, modifying location patterns to segregate the nonsmoker and the active smoker, and operating particle filtration devices. We first performed 24 scripted simulation trials using hypothetical patterns of occupant location. We then performed cohort simulation trials across 25 mitigation scenarios using over 1000 pairs of nonsmoker and smoker time-location patterns that were selected from a survey of human activity patterns in US homes. We limited cohort pairs to cases where more than 10 cigarettes were smoked indoors at home each day and the nonsmoker was at home for more than two thirds of the day. We evaluated the effectiveness of each mitigation approach by examining its impact on the simulated frequency distribution of residential SHS particle exposure. The two most effective strategies were the isolation of the smoker in a closed room with an open window, and a ban on smoking whenever the nonsmoker was at home. The use of open windows to supply local or cross ventilation, or the operation of portable filtration devices in smoking rooms, provided moderate exposure reductions. Closed doors, by themselves, were not effective.

  20. A tribute to H.W. van der Merwe: Peace builder, colleague, and friend

    African Journals Online (AJOL)

    Centre for Conflict Resolution at the University of Cape Town) for 21 years, where the main focus of his work and H.W. van der Merwe's was conflict and peace studies (CAPS). (More about him on the first page of his article in this issue.) A tribute to H.W. van der Merwe: Peace builder, colleague, and friend. Ampie Muller* ...

  1. Safe, Seen, and Celebrated with AHA! Peace Builders: Putting Youth in Charge of Change

    Science.gov (United States)

    Freed, Jennifer; Lowenstein, Melissa

    2017-01-01

    Since 2013, AHA! (Attitude. Harmony. Achievement) has trained over 300 AHA! Peace Builder youth at six area schools in Santa Barbara, California. These young people have conducted outreach to more than 5,000 additional peers, family members, and community members via Connection Circles, which they led during class, between classes, at AHA! Peace…

  2. "No place like home": Gender, family, and the politics of home care in post-world war II Ontario.

    Science.gov (United States)

    Struthers, James

    2003-01-01

    Since the early 1990s home care increasingly has emerged as a favoured policy response to the growing costs which an aging population poses for our health care system. This paper explores the early history of home care for the elderly in Ontario during the first three decades after World War II. It demonstrates that policy debates over the merits of home versus institutional care for the elderly, and community-based over hospital-based approaches to home care are not recent phenomenon but have been on going since the 1940s within the public health and social services sector. The paper examines why home care failed for so long to develop beyond the margins of Ontario's highly institutionalized health care system. It also explores how earlier visions of community-based home care, designed to help the elderly age in place, increasingly were obscured by an exclusive preoccupation with home care's "cost effectiveness" as an alternative to hospital or residential care, a rationale which discounted home care's costs to unpaid and principally female care givers. The paper concludes that the Ontario health ministry's systematic devaluing of caregiving and home maker skills, the fear of undermining the family's willingness to provide care, as well as the failure to develop effective mechanisms for integrated regional health care planning, also impeded the progress of home care's development before the 1980s.

  3. Energy Saving Homes and Buildings, Continuum Magazine, Spring 2014 / Issue 6 (Book)

    Energy Technology Data Exchange (ETDEWEB)

    2014-03-01

    This issue of Continuum focuses on NREL's research to improve the energy efficiency of residential and commercial buildings. Heating, cooling, and lighting our homes and commercial structures account for more than 70% of all electricity used in the United States. That costs homeowners, businesses, and government agencies more than $400 billion annually, about 40% of our nation's total energy costs. Producing that energy contributes almost 40% of our nation's carbon dioxide emissions.By 2030, an estimated 900 billion square feet of new and rebuilt construction will be developed worldwide, providing an unprecedented opportunity to create efficient, sustainable buildings. Increasing the energy performance of our homes alone could potentially eliminate up to 160 million tons of greenhouse gas emissions and lower residential energy bills by $21 billion annually by the end of the decade.

  4. Positive and Negative Peer Influence in Residential Care.

    Science.gov (United States)

    Huefner, Jonathan C; Smith, Gail L; Stevens, Amy L

    2017-10-13

    The potential for negative peer influence has been well established in research, and there is a growing interest in how positive peer influence also impacts youth. No research, however, has concurrently examined positive and negative peer influence in the context of residential care. Clinical records for 886 residential care youth were used in a Hierarchical Linear Model analysis to examine the impact of negative and positive peer influence on naturally occurring patterns of serious problem behavior over time. Negative peer influence, where the majority of youth in a home manifested above the average number of serious behavior problems, occurred 13.7% of the time. Positive peer influence, where the majority of youth manifested no serious problem behaviors for the month, occurred 47.7% of the time. Overall, youth problem behavior improved over time. There were significantly lower rates of serious problem behavior in target youth during positive peer influence months. Conversely, there were significantly higher rates of serious problem behaviors in target youth during negative peer influence months. Negative peer influence had a relatively greater impact on target peers' serious behavior problems than did positive peer influence. Caregiver experience significantly reduced the impact of negative peer influence, but did not significantly augment positive peer influence. Months where negative peer influence was combined with inexperienced caregivers produced the highest rates of serious problem behavior. Our results support the view that residential programs for troubled youth need to create circumstances that promote positive and control for negative peer influence.

  5. ["Gender-specific needs of nursing home residents" : Focus on personal hygiene].

    Science.gov (United States)

    Heusinger, J; Dummert, S

    2016-12-01

    Residential nursing homes are specialized in dealing with people in need of care and are required to respect their dignity and right to self-determination. This includes the respectful handling of gender-specific needs and wishes of residents. Personal hygiene is one important area to which this applies. This study was carried out to investigate residents' gender-specific perception of life and care in nursing homes. This article focuses on unspecific and gender-specific needs in the area of personal hygiene, seeking to identify where changes are needed. Structured interviews were conducted in four nursing homes with a total of ten male and ten female residents without cognitive impairments. Content analysis and description of findings proceeded in two stages: interviewees' experiences of everyday life and care were first reconstructed before gender-specific aspects were analyzed. Both universal and gender-specific needs were identified in the area of personal hygiene. The gender-unspecific wish for respect for dignity and privacy was in some cases neglected. A need for meaningful communication and respectful relationships was also gender-unspecific. Gender-specific wishes related in particular to the gender of persons assisting with or conducting personal hygiene measures. In addition to improved perception and consideration of gender-specific needs, it is also necessary to adapt nursing in residential institutions more closely to the individual needs of residents. Further research is needed in relation to the perspectives of nursing staff and the development of participatory methods for involving residents in shaping everyday life in residential institutions.

  6. Indirect Solar Water Heating in Single-Family, Zero Energy Ready Homes

    Energy Technology Data Exchange (ETDEWEB)

    Aldrich, Robb [Steven Winters Associates, Inc., Norwalk, CT (United States)

    2016-02-01

    In western Massachusetts, an affordable housing developer built a community of 20 homes with the goal of approaching zero energy consumption. In addition to excellent thermal envelopes and photovoltaic systems, the developer installed a solar domestic hot water (SDHW) system on each home. The Consortium for Advanced Residential Buildings (CARB), a U.S. Department of Energy Building America research team, commissioned some of the systems, and CARB was able to monitor detailed performance of one system for 28 months.

  7. Infectious Intestinal Diseases and Residential Water Services in Mexico: a Spatial Analysis

    Directory of Open Access Journals (Sweden)

    Nicholas P. Sisto

    2017-09-01

    Full Text Available Infectious intestinal diseases (IID represent a widespread public health problem in Mexico. The country also faces major challenges with respect to the provision of residential water services (piped water and sewer—an essential input for hygiene and cleanliness in homes. This paper analyzes morbidity rates from several IID associated with unsanitary living conditions along with a series of residential water services indicators for Mexico’s 2,456 municipalities. With data obtained through a special request to the federal epidemiological authority as well as official census data for 2010, we find stark regional contrasts and identify interesting spatial structures for both IID morbidity and residential water services indicators. In particular, municipalities tend to present values similar to neighboring municipalities, forming clusters of relatively high-value (or low-value municipalities. Moreover we find that municipalities with a relatively high level of access to residential water services tend to present relatively low IID morbidity rates. These results have multiple public policy implications. In order to reduce the incidence of IID effectively and efficiently, interventions should explicitly consider the spatial structure of morbidity and target problem spots—which typically spill over state, municipal and other administrative boundaries. Moreover, improvements in the quality of access to piped water (for example, increasing the frequency of supply may be as important for reducing morbidity as the expansion of basic access to this service.

  8. Forming Factors And Builder Indicators Of Brand Personality Models In Traditional Retail Traders

    Directory of Open Access Journals (Sweden)

    Yunelly Asra

    2017-12-01

    Full Text Available This study aims to find the factors forming and indicator builder model of brand personality of traditional retail traders through measuring the influence of retail mix and culture. The formation of brand personality uses Aaker brand personality dimension to 250 consumers in Bengkalis Regency. The type of research is causal research design. The research variables are brand personality Retail Mix and Brand Personality. Data collection is done by probability sampling with purposive method. Data analysis was done by perception analysis frequency distribution and multiple regression using SPSS version 21.0. The results of this study are The factor of retail mix partially has a positive and significant impact on the brand personality of traditional retail traders in Bengkalis Regency. Factor cultural partially does not affect the brand personality of traditional retail traders in Bengkalis Regency. Simultaneously retail mix and cultural have positive and significant influence on traditional brand traders brand personality in Bengkalis Regency. Initial forming factor of brand personality model of traditional retail traders in Bengkalis Regency is Retail Mix Factor. Indicator of the model of traditional traders brand personality builder in Bengkalis are sincerity excitement competence sophistication competence ruggedness.

  9. Registered Indian Children's School Success and Intergenerational Effects of Residential Schooling in Canada

    Directory of Open Access Journals (Sweden)

    Sacha Senécal

    2010-05-01

    Full Text Available Using the 2006 Aboriginal Peoples Survey, this study investigates factors associated with school success (as perceived by parents among off-reserve Registered Indian children aged 6 to 14 in Canada. Holding other factors constant, Registered Indian children were more likely to be doing well at school if they were living in households with high income, were living in adequately maintained dwellings, or spoke an Aboriginal language at home. Boys and older children, on the other hand, were less likely to be doing well at school, as were children who were living in larger households, experienced food insecurity, or had parents who attended residential school. Mediation analyses revealed that the negative intergenerational effect of parental residential schooling on children’s school success was partially attributable to household characteristics or economic status. Indeed, former residential school attendees were found to be more likely to live in households with a lower income, live in larger households, and report that their family had experienced food insecurity. These characteristics were, in turn, found to be negatively associated with children’s school success.

  10. Exploring variance in residential electricity consumption: Household features and building properties

    International Nuclear Information System (INIS)

    Bartusch, Cajsa; Odlare, Monica; Wallin, Fredrik; Wester, Lars

    2012-01-01

    Highlights: ► Statistical analysis of variance are of considerable value in identifying key indicators for policy update. ► Variance in residential electricity use is partly explained by household features. ► Variance in residential electricity use is partly explained by building properties. ► Household behavior has a profound impact on individual electricity use. -- Abstract: Improved means of controlling electricity consumption plays an important part in boosting energy efficiency in the Swedish power market. Developing policy instruments to that end requires more in-depth statistics on electricity use in the residential sector, among other things. The aim of the study has accordingly been to assess the extent of variance in annual electricity consumption in single-family homes as well as to estimate the impact of household features and building properties in this respect using independent samples t-tests and one-way as well as univariate independent samples analyses of variance. Statistically significant variances associated with geographic area, heating system, number of family members, family composition, year of construction, electric water heater and electric underfloor heating have been established. The overall result of the analyses is nevertheless that variance in residential electricity consumption cannot be fully explained by independent variables related to household and building characteristics alone. As for the methodological approach, the results further suggest that methods for statistical analysis of variance are of considerable value in indentifying key indicators for policy update and development.

  11. The direct cost of acute hip fracture care in care home residents in the UK.

    Science.gov (United States)

    Sahota, O; Morgan, N; Moran, C G

    2012-03-01

    Data on the true acute care costs of hip fractures for patients admitted from care homes are limited. Detailed costing analysis was undertaken for 100 patients. Median cost was £9,429 [10,896], increasing to £14,435 [16,681], for those requiring an upgrade from residential to nursing home care. Seventy-six percent of costs were attributable to hospital bed days, and therefore, interventions targeted at reducing hospital stay may be cost effective. Previous studies have estimated the costs associated with hip fracture, although these vary widely, and for patients admitted from care homes, who represent a significant fracture burden, there are limited data. The primary aim of this study was to perform a detailed assessment of the direct medical costs incurred and secondly compare this to the actual remuneration received by the hospital. One hundred patients presenting from a care home in 2006 were randomly selected and a detailed case-note costing analysis was undertaken. This cost was then compared to the actual remuneration received by the hospital. Median cost per patient episode was £9,429 [10,896] (all patients) range £4,292-162,324 [4,960-187,582] (subdivided into hospital bed day costs £7,129 [8,238], operative costs £1,323 [1,529] and investigation costs £977 [1,129]). Twenty-two percent of the patients admitted from a residential home required upgrading to a nursing home. In this group, the median length of stay was 31 days (mean 38, range 10-88) median cost £14,435 [16,681]. Average remuneration received equated to £6,222 [7,190] per patient. This represents a mean loss in income, compared to actual calculated costs of £3,207 [3,706] per patient. The median cost was £9,429 [10,896], increasing to £14,435 [16,681], for those requiring an upgrade from residential to nursing home care at discharge. Significant cost differences were seen comparing the actual cost to remuneration received. Interventions targeted at reducing length of stay may be cost

  12. Redefining neighborhoods using common destinations: social characteristics of activity spaces and home census tracts compared.

    Science.gov (United States)

    Jones, Malia; Pebley, Anne R

    2014-06-01

    Research on neighborhood effects has focused largely on residential neighborhoods, but people are exposed to many other places in the course of their daily lives-at school, at work, when shopping, and so on. Thus, studies of residential neighborhoods consider only a subset of the social-spatial environment affecting individuals. In this article, we examine the characteristics of adults' "activity spaces"-spaces defined by locations that individuals visit regularly-in Los Angeles County, California. Using geographic information system (GIS) methods, we define activity spaces in two ways and estimate their socioeconomic characteristics. Our research has two goals. First, we determine whether residential neighborhoods represent the social conditions to which adults are exposed in the course of their regular activities. Second, we evaluate whether particular groups are exposed to a broader or narrower range of social contexts in the course of their daily activities. We find that activity spaces are substantially more heterogeneous in terms of key social characteristics, compared to residential neighborhoods. However, the characteristics of both home neighborhoods and activity spaces are closely associated with individual characteristics. Our results suggest that most people experience substantial segregation across the range of spaces in their daily lives, not just at home.

  13. Mini-Split Heat Pump Evaluation and Zero Energy Ready Home Support

    Energy Technology Data Exchange (ETDEWEB)

    Herk, Anastasia [IBACOS, Inc., Pittsburgh, PA (United States)

    2017-01-01

    This project was created from a partnership between the U.S. Department of Energy’s (DOE’s) Building America research team IBACOS, Inc. and Imagine Homes, a production homebuilder of high-performance homes in San Antonio, Texas—a hot-humid climate. The primary purpose was to evaluate the performance of a multihead mini-split heat pump (MSHP) space-conditioning system, which consists of ducted and ductless indoor units, in maintaining uniform comfort in an occupied test house. The research team evaluated the MSHP space-conditioning strategy for its effectiveness in achieving uniform temperature and relative humidity (RH) levels throughout the test house and for overall constructability and cost. This evaluation was based on data that were collected from short-term tests and monitoring during 1 year of occupancy, as well as from builder and occupant feedback. Design considerations for integrating an MSHP system into the builder’s full range of production home designs were also explored, with a focus on minimizing the cost and complexity of the system design while meeting the thermal loads of the house and providing occupant comfort according to ANSI/ASHRAE Standard 55-2010 (ASHRAE 2010a).

  14. ChemSkill Builder 2000, Version 6.1 [CD-ROM] (by James D. Spain and Harold J. Peters)

    Science.gov (United States)

    Keeney-Kennicutt, Reviewed By Wendy L.

    2000-07-01

    One of the major challenges for faculty teaching general chemistry is how to encourage students to practice solving problems. We know that for students to develop chemical intuition and problem-solving skills, they must "get their hands dirty" as they decipher and unravel problems inherent to our discipline. One tool that I've used since its release in 1996 is the ChemSkill Builder, an electronic homework package. The latest version, ChemSkill Builder (CSB) 2000, version 6.1, is an excellent, effective integration of teaching and testing most quantitative and conceptual learning objectives in an interactive way. It is inexpensive and easy to use for both students and faculty. The CSB 2000 package of personalized problem sets, specifically designed to complement most general chemistry courses, is a program on CD-ROM for PC Windows users (3.1, 95, or 98), with more than 1500 questions and a 3 1/2-in. record-management disk. There is a separate grade-management disk for the instructor. It has 24 gradable chapters, each with 5 or 6 sections, plus two new chapters that are not graded: Polymer Chemistry and an Appendix of Chemical Skills. Each section begins with a short review of the topic and many have interactive explanations. If students miss an answer, they are given a second chance for 70% credit. If they still miss, the worked-out solution is presented in detail. Students can work each section as many times as they wish to improve their scores. Periodically, the students download their data directly into a PC set up by the instructor. The data can be easily converted into an ASCII file and merged with a spreadsheet. The use of CD-ROM solves the sporadic problems associated with previous versions on 3 1/2-in. disks: software glitches, failed disks, and system incompatibilities. The quality and number of graphics and interactive exercises are much improved in this latest version. I particularly enjoyed the interactive explanations of significant figures and

  15. AWARENESS ON ENERGY MANAGEMENT IN RESIDENTIAL BUILDINGS: A CASE STUDY IN KAJANG AND PUTRAJAYA

    Directory of Open Access Journals (Sweden)

    MAYTHAM S. AHMED

    2017-05-01

    Full Text Available This paper presents a case study on a survey and measurement being carried out for the purpose of determining residential electric power consumption and awareness toward smart energy management system in the areas of Putrajaya and Kajang, Malaysia. Questionnaires were developed with 37 questions grouped in 5 different sections related to home appliance information. Data was collected from a sample size of 384 respondents with confidence level of 95%. The accuracy of the percentage energy usage data were analysed by applying the SPSS software. Actual residential electric power consumption was measured by using a power quality analyser to determine the total power consumption at weekday and weekend and power consumption of each electrical appliance. The measurement results showed that the average energy consumption is 25.8 kWh/day during weekend and 21.9 kWh/day during weekdays with 11.5 kWh/day for the air conditioner only. The survey results revealed that 89.06% of the respondents expressed awareness toward household power consumption and that they are willing to install home automation system to reducing their electricity bill.

  16. Results of the Washington Passive Solar Design/Build Competition

    Energy Technology Data Exchange (ETDEWEB)

    Nylen, N.

    1981-01-01

    In an effort to encourage the design, construction, and marketing of moderately priced passive solar homes in Washington state, the Western Solar Utilization Network (Western SUN) recently sponsored the Washington Passive Solar Design/Build Competition. The competition drew an overwhelming response from designers and builders throughout Washington. Thermal performance of the designs was evaluated by a technical review committee, and final selections were made by the Competition Jury in accordance with the following criteria: perceived market acceptance, thermal performance, cost effectiveness, simplicity of design and operation, and completeness of the passive concept. Design contract awards totaling $50,000 were made available to winners in four categories, including single and multi-family, new and remodeled residences. In order to receive the award in its entirety, winning design/build teams are required to construct their design by April, 1983. As a result of the competition, a great deal was learned about the attitudes and knowledge of professionals and the general public regarding the use of solar energy in Washington state. Among the points that will be highlighted in this paper are the following: (1) a design/build competition is an effective vehicle for promoting solar energy among professionals in the housing community as well as the general public; (2) passive solar techniques can contribute significantly to the heating and cooling needs of residential housing throughout the state of Washington; (3) there is a great deal of interest and talent among the designers and builders of solar residences in Washington; and (4) follow-up activities, including the promotion of winning designs, the systematic collection of performance data, and identification of the major obstacles confronting designers and builders of solar homes, are critical to the success of the program in achieving both its short-term and long-term goals.

  17. The image of the blessed monarch, the Holy King of Georgia David the Builder

    Directory of Open Access Journals (Sweden)

    Efimov Vladimir Fedorovich

    2014-07-01

    Full Text Available The article considers the biography of the saint Georgian monarch, David the Builder, analyzes his actions, church, external and internal policy. Finally it draws a conclusion that all his life was dedicated to the service of God and neighbor. Thus, his life was a model of Christian Ministry, he occupied a responsible position in society.

  18. A Method for Quantifying the Acute Health Impacts of Residential Non-Biological Exposure Via Inhalation

    Energy Technology Data Exchange (ETDEWEB)

    Logue, Jennifer M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sherman, Max H. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Singer, Bret C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2014-08-01

    The inability to monetize the health costs of acute exposures in homes and the benefits of various control options is a barrier to justifying policies and approaches that can reduce exposure and improve health.We synthesized relationships between short-term outdoor concentration changes and health outcomes to estimate the health impacts of short-term in-home exposures. Damage and cost impacts of specific health outcomes were taken from the literature. We assessed the impact of vented and non-vented residential natural gas cooking burners on Southern California occupants for two pollutants (NO2 and CO).

  19. Nursing Homes and their Spatial Contexts - Findings from Austria

    Science.gov (United States)

    Fischer, Tatjana

    2017-10-01

    Against the background of aging and the increasing number of persons in need of care on one hand and the decreasing potential of family support on the other hand, in-patient facilities both in rural areas as well as urban areas of Austria receive importance as final residence. The decision on a facility is challenging. That is why the Austrian Federal Ministry of Labour, Social Affairs and Consumer Protection edits a brochure in three volumes that provides interested persons with information on each residential and nursing home for elderly people. Basing on data from the year 2014, this contribution aims at analysing relevant spatial related information on 885 residential and nursing homes in urban and rural contexts in order to demonstrate how spatial related aspects are considered in the facilities’ presentations and how they illustrate the level of community integration of these in-patient offers, to understand facility-specific future plans as well as to reveal important questions and define urgent research demand and to stimulate the interdisciplinary and cross-cutting dialogue.

  20. An Investigation into the Fundamental Drivers of Pricing of Residential Mortgage Products – A Risk Pricing Viewpoint

    Directory of Open Access Journals (Sweden)

    Harry M Karamujic

    2010-12-01

    Full Text Available Residential mortgage products (also known as home loans pricing has been long understood to be something of a ‘dark art’, requiring judgment and experience, rather than being an exact science. In the last decade, a lot has changed in this field and more and more lenders, primarily the larger lenders, are increasingly looking to make their pricing as exact as possible. Even so, inadequate pricing of residential mortgage products (in particular its substandard risk pricing has been seen as one of major causes of the global financial crisis (GFC and subsequent spectacular banking collapses. The underlying theme of the paper is to exhibit how contemporary lenders, in practice, price their residential mortgage products. While discussing elements of the pricing calculation particular attention was given to the exposition of how contemporary lenders price risks involved in providing home loans. Because of the importance of Basel capital accords to how financial institutions assess and quantify their risks, the paper provides an overview of Basel capital accords. The author envisages that the paper will (i help enhance comprehension of the underlying elements of the pricing calculation and the ways in which these elements relate to each other, (ii scrutinize how contemporary lenders identify and quantify risks and (iii improve consciousness of future changes in interest rates

  1. Building America Top Innovations 2014 Profile: ASHRAE Standard 62.2. Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2014-11-01

    This 2014 Top Innovations profile describes Building America research and support in developing and gaining adoption of ASHRAE 62.2, a residential ventilation standard that is critical to transforming the U.S. housing industry to high-performance homes.

  2. Prioritizing investment in residential energy efficiency and renewable energy-A case study for the U.S. Midwest

    International Nuclear Information System (INIS)

    Brecha, R.J.; Mitchell, A.; Hallinan, K.; Kissock, K.

    2011-01-01

    Residential building energy use is an important contributor to greenhouse gas emissions and in the United States represents about 20% of total energy consumption. A number of previous macro-scale studies of residential energy consumption and energy-efficiency improvements are mainly concerned with national or international aggregate potential savings. In this paper we look into the details of how a collection of specific homes in one region might reduce energy consumption and carbon emissions, with particular attention given to some practical limits to what can be achieved by upgrading the existing residential building stock. Using a simple model of residential, single-family home construction characteristics, estimates are made for the efficacy of (i) changes to behavioral patterns that do not involve building shell modifications; (ii) straightforward air-infiltration mitigation measures, and (iii) insulation measures. We derive estimates of net lifetime savings resulting from these measures, in terms of energy, carbon emissions and dollars. This study points out explicitly the importance of local and regional patterns in decision-making about what fraction of necessary regional or national emissions reduction might be accomplished through energy-efficiency measures and how much might need to concentrate more heavily on renewable or other carbon-free sources of energy. - Highlights: → Macro-scale estimates of building energy efficiency measures are not adequate for implementing policy decisions. → Measures taken to implement building energy efficiency upgrades will likely encounter practical limits given the existing building stock. → Energy efficiency measures combined with increases in renewable energy use will be necessary for climate change mitigation. → Regional and local variations in building energy use must be taken into account in energy and climate policy.

  3. Appraising into the Sun: Six-State Solar Home Paired-Sale Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence Berkeley National Laboratory

    2015-11-12

    Although residential solar photovoltaic (PV) installations have proliferated, PV systems on some U.S. homes still receive no value during an appraisal because comparable home sales are lacking. To value residential PV, some previous studies have employed paired-sales appraisal methods to analyze small PV home samples in depth, while others have used statistical methods to analyze large samples. Our first-of-its-kind study connects the two approaches. It uses appraisal methods to evaluate sales price premiums for owned PV systems on single-unit detached houses that were also evaluated in a large statistical study. Independent appraisers evaluated 43 recent home sales pairs in six states: California, Oregon, Florida, Maryland, North Carolina, and Pennsylvania. We compare these results with contributory-value estimates—based on income (using the PV Value® tool), gross cost, and net cost—as well as hedonic modeling results from the recent statistical study. The results provide strong, appraisal-based evidence of PV premiums in all states. More importantly, the results support the use of cost- and incomebased PV premium estimates when paired-sales analysis is impossible. PV premiums from the paired-sales analysis are most similar to net PV cost estimates. PV Value® income results generally track the appraised premiums, although conservatively. The appraised premiums are in agreement with the hedonic modeling results as well, which bolsters the suitability of both approaches for estimating PV home premiums. Therefore, these results will benefit valuation professionals and mortgage lenders who increasingly are encountering homes equipped with PV and need to understand the factors that can both contribute to and detract from market value.

  4. Impact of roof integrated PV orientation on the residential electricity peak demand

    International Nuclear Information System (INIS)

    Sadineni, Suresh B.; Atallah, Fady; Boehm, Robert F.

    2012-01-01

    Highlights: ► A study to demonstrate peak load reductions at the substation. ► A new residential energy efficient community named Villa Trieste is being developed. ► The peak demand from the homes has decreased by 38% through energy efficiency. ► Orientation of roof integrated PV has less influence on the summer peak demand. ► Increasing thermostat temperature during peak by 1 °C can significantly reduce peaks. -- Abstract: Peak electricity demand has been an issue in the Desert Southwest region of the US, due to extreme summer temperatures. To address this issue, a consortium was formed between the University of Nevada, Las Vegas, Pulte Homes, and NV Energy. An energy efficient residential community was developed by the team in Las Vegas with approximately 200 homes to study substation-level peak reduction strategies. A summer peak reduction of more than 65%, between 1:00 PM and 7:00 PM, compared to code standard housing developments is the targeted goal of the project. Approximately 50 homes are already built and some are occupied. The energy performances of the homes have been monitored and are presented in this paper. Several peak electric load reduction strategies such as energy efficiency in buildings, roof integrated photovoltaics (PV) and direct load control have been applied. Though all the homes in the developed community are installed with 1.8 kW p PV systems, the orientation of the PV system depends on the building orientation. Focus of this paper is to find the impact of PV orientation on the peak load from a building. In addition, different time-of-use (TOU) energy pricing options are offered by the local electrical utility company. Hence it is important to find an optimal pricing option for each building. A computer model has been developed for one of the homes in the new development using building energy simulation code, ENERGY-10. Calculations on the PV orientations have shown that a south and 220° (i.e. 40° west of due south

  5. Flexible Residential Test Facility: Impact of Infiltration and Ventilation on Measured Cooling Season Energy and Moisture Levels

    Energy Technology Data Exchange (ETDEWEB)

    Parker, Danny S. [BA-PIRC/Florida Solar Energy Center, Cocoa, FL (United States); Cummings, Jamie E. [BA-PIRC/Florida Solar Energy Center, Cocoa, FL (United States); Vieira, Robin K. [BA-PIRC/Florida Solar Energy Center, Cocoa, FL (United States); Fairey, III, Phillip W. [BA-PIRC/Florida Solar Energy Center, Cocoa, FL (United States); Sherwin, John S. [BA-PIRC/Florida Solar Energy Center, Cocoa, FL (United States); Withers, Jr., Charles [BA-PIRC/Florida Solar Energy Center, Cocoa, FL (United States); Hoak, David [BA-PIRC/Florida Solar Energy Center, Cocoa, FL (United States); Beal, David [BA-PIRC/Florida Solar Energy Center, Cocoa, FL (United States)

    2016-09-01

    Air infiltration and ventilation in residential buildings is a very large part of the heating loads, but empirical data regarding the impact on space cooling has been lacking. Moreover, there has been little data on how building tightness might relate to building interior moisture levels in homes in a hot and humid climate. To address this need, BA-PIRC has conducted research to assess the moisture and cooling load impacts of airtightness and mechanical ventilation in two identical laboratory homes in the hot-humid climate over the cooling season.

  6. Flexible Residential Test Facility: Impact of Infiltration and Ventilation on Measured Cooling Season Energy and Moisture Levels

    Energy Technology Data Exchange (ETDEWEB)

    Parker, D.; Kono, J.; Vieira, R.; Fairey, P.; Sherwin, J.; Withers, C.; Hoak, D.; Beal, D.

    2014-05-01

    Air infiltration and ventilation in residential buildings is a very large part of the heating loads, but empirical data regarding the impact on space cooling has been lacking. Moreover, there has been little data on how building tightness might relate to building interior moisture levels in homes in a hot and humid climate. To address this need, BA-PIRC has conducted research to assess the moisture and cooling load impacts of airtightness and mechanical ventilation in two identical laboratory homes in the hot-humid climate over the cooling season.

  7. Reconciling Consumer and Utility Objectives in the Residential Solar PV Market

    Science.gov (United States)

    Arnold, Michael R.

    Today's energy market is facing large-scale changes that will affect all market players. Near the top of that list is the rapid deployment of residential solar photovoltaic (PV) systems. Yet that growing trend will be influenced multiple competing interests between various stakeholders, namely the utility, consumers and technology provides. This study provides a series of analyses---utility-side, consumer-side, and combined analyses---to understand and evaluate the effect of increases in residential solar PV market penetration. Three urban regions have been selected as study locations---Chicago, Phoenix, Seattle---with simulated load data and solar insolation data at each locality. Various time-of-use pricing schedules are investigated, and the effect of net metering is evaluated to determine the optimal capacity of solar PV and battery storage in a typical residential home. The net residential load profile is scaled to assess system-wide technical and economic figures of merit for the utility with an emphasis on intraday load profiles, ramp rates and electricity sales with increasing solar PV penetration. The combined analysis evaluates the least-cost solar PV system for the consumer and models the associated system-wide effects on the electric grid. Utility revenue was found to drop by 1.2% for every percent PV penetration increase, net metering on a monthly or annual basis improved the cost-effectiveness of solar PV but not battery storage, the removal of net metering policy and usage of an improved the cost-effectiveness of battery storage and increases in solar PV penetration reduced the system load factor. As expected, Phoenix had the most favorable economic scenario for residential solar PV, primarily due to high solar insolation. The study location---solar insolation and load profile---was also found to affect the time of year at which the largest net negative system load was realized.

  8. Procedures and Standards for Residential Ventilation System Commissioning: An Annotated Bibliography

    Energy Technology Data Exchange (ETDEWEB)

    Stratton, J. Chris [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Wray, Craig P. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2013-04-01

    Beginning with the 2008 version of Title 24, new homes in California must comply with ANSI/ASHRAE Standard 62.2-2007 requirements for residential ventilation. Where installed, the limited data available indicate that mechanical ventilation systems do not always perform optimally or even as many codes and forecasts predict. Commissioning such systems when they are installed or during subsequent building retrofits is a step towards eliminating deficiencies and optimizing the tradeoff between energy use and acceptable IAQ. Work funded by the California Energy Commission about a decade ago at Berkeley Lab documented procedures for residential commissioning, but did not focus on ventilation systems. Since then, standards and approaches for commissioning ventilation systems have been an active area of work in Europe. This report describes our efforts to collect new literature on commissioning procedures and to identify information that can be used to support the future development of residential-ventilation-specific procedures and standards. We recommend that a standardized commissioning process and a commissioning guide for practitioners be developed, along with a combined energy and IAQ benefit assessment standard and tool, and a diagnostic guide for estimating continuous pollutant emission rates of concern in residences (including a database that lists emission test data for commercially-available labeled products).

  9. Mental health issues in Australian nursing homes.

    Science.gov (United States)

    Lie, David

    2003-07-01

    Mental illness is common, under detected and often poorly managed in residential aged care facilities. These concerns have achieved greater prominence as the worldwide population ages. Over 80% of people in nursing home care fulfill criteria for one or more psychiatric disorders in an environment that often presents significant difficulties for assessment and treatment. This article aims to provide an overview of the important mental health issues involved in providing medical care for patients with behavioural and psychological problems in residential aged care facilities. Recent developments in education and training, service development and assessment and treatment strategies show some promise of improving the outcome for aged care residents with mental health problems. This is of especial relevance for primary care physicians who continue to provide the bulk of medical care for this population.

  10. Institutional Regimes and Induced Dependency in Homes for the Aged.

    Science.gov (United States)

    Booth, Tim

    1986-01-01

    Reports effects of institutional regimes on levels of dependency among residents of public homes for the elderly in England. Differences in management practices and caring routines did not affect the creation or reduction of dependency among residents. Questions the rationale that informs some current notions of good practice in residential work.…

  11. The design and implementation of signal decomposition system of CL multi-wavelet transform based on DSP builder

    Science.gov (United States)

    Huang, Yan; Wang, Zhihui

    2015-12-01

    With the development of FPGA, DSP Builder is widely applied to design system-level algorithms. The algorithm of CL multi-wavelet is more advanced and effective than scalar wavelets in processing signal decomposition. Thus, a system of CL multi-wavelet based on DSP Builder is designed for the first time in this paper. The system mainly contains three parts: a pre-filtering subsystem, a one-level decomposition subsystem and a two-level decomposition subsystem. It can be converted into hardware language VHDL by the Signal Complier block that can be used in Quartus II. After analyzing the energy indicator, it shows that this system outperforms Daubenchies wavelet in signal decomposition. Furthermore, it has proved to be suitable for the implementation of signal fusion based on SoPC hardware, and it will become a solid foundation in this new field.

  12. The implementation of e-learning with team builder at vocational high schools

    Directory of Open Access Journals (Sweden)

    Mahmud Al Haq Patwary

    2015-06-01

    Full Text Available This research is aimed at: (1 producing an appropriate e-learning for English language studies in vocational high school, (2 evaluating the suitability of the developed e-learning in terms of appropriateness, accuracy and clarity, screen presentation and design, and appropriateness of the team builder module aspect, and (3 evaluating the effectiveness of the e-learning in practical application. This research and development (R&D study used Alessi and Trollip’s model rearranged following ADDIE model, where the development of instruction followed Dick and Carey’s model and the need assessment procedures were adapted from Lee & Owens. Overall appropriateness and quality of the e-learning from alpha testing is ‘very appropriate’ and from beta testing is ‘excellent’. Alpha testing reveals that, the Team Builder Module is ‘very appropriate’ and beta testing reveals that, its overall quality is ‘excellent’. The e-learning is highly effective. The average score of the students raises 3.82 points (or 42.44% in the post-test from pre-test score. The minimum score of the post-test (i.e. 8 is more than the maximum score of the pre-test (i.e. 7, so it is concluded that the use of e-learning does not deteriorate the performance of the students, but improves their performance.

  13. Final Scientific/Technical Report: Context-Aware Smart Home Energy Manager (CASHEM)

    Energy Technology Data Exchange (ETDEWEB)

    Foslien, Wendy K. [Honeywell International Inc., Golden Valley, MN (United States); Curtner, Keith L. [Honeywell International Inc., Golden Valley, MN (United States)

    2013-01-15

    Because of growing energy demands and shortages, residential home owners are turning to energy conservation measures and smart home energy management devices to help them reduce energy costs and live more sustainably. In this context, the Honeywell team researched, developed, and tested the Context Aware Smart Home Energy Manager (CASHEM) as a trusted advisor for home energy management. The project focused on connecting multiple devices in a home through a uniform user interface. The design of the user interface was an important feature of the project because it provided a single place for the homeowner to control all devices and was also where they received coaching. CASHEM then used data collected from homes to identify the contexts that affect operation of home appliances. CASHEM's goal was to reduce energy consumption while keeping the user's key needs satisfied. Thus, CASHEM was intended to find the opportunities to minimize energy consumption in a way that fit the user's lifestyle.

  14. Identifying risk factors for healthcare-associated infections from electronic medical record home address data

    Directory of Open Access Journals (Sweden)

    Rosenman Marc B

    2010-09-01

    Full Text Available Abstract Background Residential address is a common element in patient electronic medical records. Guidelines from the U.S. Centers for Disease Control and Prevention specify that residence in a nursing home, skilled nursing facility, or hospice within a year prior to a positive culture date is among the criteria for differentiating healthcare-acquired from community-acquired methicillin-resistant Staphylococcus aureus (MRSA infections. Residential addresses may be useful for identifying patients residing in healthcare-associated settings, but methods for categorizing residence type based on electronic medical records have not been widely documented. The aim of this study was to develop a process to assist in differentiating healthcare-associated from community-associated MRSA infections by analyzing patient addresses to determine if residence reported at the time of positive culture was associated with a healthcare facility or other institutional location. Results We identified 1,232 of the patients (8.24% of the sample with positive cultures as probable cases of healthcare-associated MRSA based on residential addresses contained in electronic medical records. Combining manual review with linking to institutional address databases improved geocoding rates from 11,870 records (79.37% to 12,549 records (83.91%. Standardization of patient home address through geocoding increased the number of matches to institutional facilities from 545 (3.64% to 1,379 (9.22%. Conclusions Linking patient home address data from electronic medical records to institutional residential databases provides useful information for epidemiologic researchers, infection control practitioners, and clinicians. This information, coupled with other clinical and laboratory data, can be used to inform differentiation of healthcare-acquired from community-acquired infections. The process presented should be extensible with little or no added data costs.

  15. Intelligent Support System of Steel Technical Preparation in an Arc Furnace: Functional Scheme of Interactive Builder of the Multi Objective Optimization Problem

    Science.gov (United States)

    Logunova, O. S.; Sibileva, N. S.

    2017-12-01

    The purpose of the study is to increase the efficiency of the steelmaking process in large capacity arc furnace on the basis of implementation a new decision-making system about the composition of charge materials. The authors proposed an interactive builder for the formation of the optimization problem, taking into account the requirements of the customer, normative documents and stocks of charge materials in the warehouse. To implement the interactive builder, the sets of deterministic and stochastic model components are developed, as well as a list of preferences of criteria and constraints.

  16. Audel carpenter's and builder's math, plans, and specifications

    CERN Document Server

    Miller, Mark Richard

    2005-01-01

    You can count on a good planA successful building or remodeling job requires not only a plan, but also the skill to interpret it and an understanding of the mathematics behind it. Whether you are a builder by trade or a do-it-yourself carpenter by choice, turn to this newly updated guide for easy explanations of the math involved and clear instructions on developing and using the necessary plans and specifications.* Explore the different types of wood products and learn what is best for your purpose* Choose appropriate building materials for weather and other natural factors* Refresh your knowledge of fractions, ratios, geometry, and measurement* Understand how to use basic surveying tools* Become familiar with the design process and recognize various styles of architecture* Learn to read architectural drawings and work with computer design

  17. Field Measurements of Heating Efficiency of Electric Forced-Air Furnaces in Six Manufactured Homes.

    Energy Technology Data Exchange (ETDEWEB)

    Davis, Bob; Palmiter, Larry S.; Siegel, Jeff

    1994-07-26

    This report presents the results of field measurements of heating efficiency for six manufactured homes in the Pacific Northwest heated with electric forced-air systems. This is the first in a series of regional and national efforts to measure in detail the heating efficiency of manufactured homes. Only six homes were included in this study because of budgetary constraints; therefore this is not a representative sample. These investigations do provide some useful information on the heating efficiency of these homes. Useful comparisons can be drawn between these study homes and site-built heating efficiencies measured with a similar protocol. The protocol used to test these homes is very similar to another Ecotope protocol used in the study conducted in 1992 and 1993 for the Bonneville Power Administration to test the heating efficiency of 24 homes. This protocol combined real-time power measurements of furnace energy usage with energy usage during co-heat periods. Accessory data such as house and duct tightness measurements and tracer gas measurements were used to describe these homes and their heating system efficiency. Ensuring that manufactured housing is constructed in an energy and resource efficient manner is of increasing concern to manufactured home builders and consumers. No comparable work has been done to measure the heating system efficiency of MCS manufactured homes, although some co-heat tests have been performed on manufactured homes heated with natural gas to validate HUD thermal standards. It is expected that later in 1994 more research of this kind will be conducted, and perhaps a less costly and less time-consuming method for testing efficiencies will be develops.

  18. The Impact of Child Sexual Abuse on the Education of Boys in Residential Care between 1950 and 1975

    Science.gov (United States)

    Bode, Andrew; Goldman, Juliette D. G.

    2012-01-01

    Children's education may be adversely impacted by external factors during their childhood. For example, learning to learn, critical reflection, experiential learning and self-direction may be permanently impaired. Many children in out-of-home residential care during the last century suffered ongoing child abuse and neglect, including sexual abuse,…

  19. Cost-Reduction Roadmap for Residential Solar Photovoltaics (PV), 2017-2030

    Energy Technology Data Exchange (ETDEWEB)

    Cook, Jeffrey J. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Ardani, Kristen B. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Margolis, Robert M. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Fu, Ran [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2018-01-03

    The installed cost of solar photovoltaics (PV) has fallen rapidly in recent years and is expected to continue declining in the future. In this report, we focus on the potential for continued PV cost reductions in the residential market. From 2010 to 2017, the levelized cost of energy (LCOE) for residential PV declined from 52 cents per kilowatt-hour (cents/kWh) to 16 cents/kWh (Fu et al. 2017). The U.S. Department of Energy's (DOE's) Solar Energy Technologies Office (SETO) recently set new LCOE targets for 2030, including a target of 5 cents/kWh for residential PV. We present a roadmap for achieving the SETO 2030 residential PV target. Because the 2030 target likely will not be achieved under business-as-usual trends (NREL 2017), we examine two key market segments that demonstrate significant opportunities for cost savings and market growth: installing PV at the time of roof replacement and installing PV as part of the new home construction process. Within both market segments, we identify four key cost-reduction opportunities: market maturation, business model integration, product innovation, and economies of scale. To assess the potential impact of these cost reductions, we compare modeled residential PV system prices in 2030 to the National Renewable Energy Laboratory's (NREL's) quarter one 2017 (Q1 2017) residential PV system price benchmark (Fu et al. 2017). We use a bottom-up accounting framework to model all component and project-development costs incurred when installing a PV system. The result is a granular accounting for 11 direct and indirect costs associated with installing a residential PV system in 2030. All four modeled pathways demonstrate significant installed-system price savings over the Q1 2017 benchmark, with the visionary pathways yielding the greatest price benefits. The largest modeled cost savings are in the supply chain, sales and marketing, overhead, and installation labor cost categories. When we translate these

  20. Characteristics of residential energy consumption in China: Findings from a household survey

    International Nuclear Information System (INIS)

    Zheng, Xinye; Wei, Chu; Qin, Ping; Guo, Jin; Yu, Yihua; Song, Feng; Chen, Zhanming

    2014-01-01

    A comprehensive survey of 1450 households in 26 Chinese provinces was undertaken in 2012 to identify the characteristics and potential driving forces of residential energy consumption in China. The survey covers six areas: household characteristics, dwelling characteristics, kitchen and home appliances, space heating and cooling, residential transportation, and electricity billing, metering, and pricing options. The results show that a typical Chinese household in 2012 consumed 1426 kilograms standard coal equivalent, which is approximately 44 percent of the 2009 level in the United States and 38 percent of the 2008 level in the EU-27. District heating, natural gas, and electricity are three major residential energy sources, while space heating, cooking, and water heating are three major end-use activities. Moreover, the results suggest a large urban–rural gap in terms of energy sources and purpose of usage. Commercial energy is used mainly for space heating in urban areas, while biomass dominates mainly for cooking purpose in rural areas. The survey results can help decision makers and scholars identify energy conservation opportunities, and evaluate the effectiveness of energy policies. - Highlights: • We develop the first comprehensive survey of residential energy consumption in China. • A typical Chinese household in 2012 consumed 1426 kilograms coal equivalent. • Space heating accounts for half of energy demand. • A large rural–urban gap exists in terms of energy sources and end-use activities. • Results reveal challenges and opportunities for China's energy policy

  1. A combined analysis of North American case-control studies of residential radon and lung cancer.

    Science.gov (United States)

    Krewski, Daniel; Lubin, Jay H; Zielinski, Jan M; Alavanja, Michael; Catalan, Vanessa S; Field, R William; Klotz, Judith B; Létourneau, Ernest G; Lynch, Charles F; Lyon, Joseph L; Sandler, Dale P; Schoenberg, Janet B; Steck, Daniel J; Stolwijk, Jan A; Weinberg, Clarice; Wilcox, Homer B

    2006-04-01

    Cohort studies have consistently shown underground miners exposed to high levels of radon to be at excess risk of lung cancer, and extrapolations based on those results indicate that residential radon may be responsible for nearly 10-15% of all lung cancer deaths per year in the United States. However, case-control studies of residential radon and lung cancer have provided ambiguous evidence of radon lung cancer risks. Regardless, alpha-particle emissions from the short-lived radioactive radon decay products can damage cellular DNA. The possibility that a demonstrated lung carcinogen may be present in large numbers of homes raises a serious public health concern. Thus, a systematic analysis of pooled data from all North American residential radon studies was undertaken to provide a more direct characterization of the public health risk posed by prolonged radon exposure. To evaluate the risk associated with prolonged residential radon exposure, a combined analysis of the primary data from seven large scale case-control studies of residential radon and lung cancer risk was conducted. The combined data set included a total of 4081 cases and 5281 controls, representing the largest aggregation of data on residential radon and lung cancer conducted to date. Residential radon concentrations were determined primarily by a-track detectors placed in the living areas of homes of the study subjects in order to obtain an integrated 1-yr average radon concentration in indoor air. Conditional likelihood regression was used to estimate the excess risk of lung cancer due to residential radon exposure, with adjustment for attained age, sex, study, smoking factors, residential mobility, and completeness of radon measurements. Although the main analyses were based on the combined data set as a whole, we also considered subsets of the data considered to have more accurate radon dosimetry. This included a subset of the data involving 3662 cases and 4966 controls with a-track radon

  2. The Effects of Staff Training on the Types of Interactions Observed at Two Group Homes for Foster Care Children

    Science.gov (United States)

    Crosland, Kimberly A.; Dunlap, Glen; Sager, Wayne; Neff, Bryon; Wilcox, Catherine; Blanco, Alfredo; Giddings, Tamela

    2008-01-01

    Objectives: An extensive literature base exists for behavioral parent training; however, few studies have focused on training direct care staff at group home and residential facilities for children. This study was conducted to determine whether a behavioral staff training program consisting of classroom training and in-home feedback would improve…

  3. A Long-Term Leisure Program for Individuals with Intellectual Disability in Residential Care Settings: Research to Practice

    Science.gov (United States)

    Fox, Robert A.; Burke, Amie M.; Fung, Michael P.

    2013-01-01

    We studied the effectiveness of an individually-tailored leisure program implemented by direct care staff in a residential program for 28 adults with severe to profound intellectual disability using a multiple baseline design across two homes over a 1.5 year baseline and treatment period followed by another nearly 1.5 year maintenance phase. The…

  4. Pengembangan Aplikasi Pengolah Kata Menggunakan C++ Builder 5.0

    Directory of Open Access Journals (Sweden)

    Lukman Effendi

    2016-11-01

    Full Text Available A word processor is a tool used for writing text in which a word processing application has a function can perform text editing and printing. In making the word processing application is used programming languages C ++ Builder 5.0. The logic flow of this first word processing application user will be presented with a form where there is a place to write the text. Within these forms are also several main menu in which there is a menu that is used to create new documents, the menu is used to edit the text, the menu is used for printing, as well as a menu that is used to store documents that support the format: .txt,. rtf, doc.

  5. Landscape Builder: Software for the creation of initial landscapes for LANDIS from FIA data

    Directory of Open Access Journals (Sweden)

    William Dijak

    2013-06-01

    Full Text Available I developed Landscape Builder to create spatially explicit landscapes as starting conditions for LANDIS Pro 7.0 and LANDIS II landscape forest simulation models from classified satellite imagery and Forest Inventory and Analysis (FIA data collected over multiple years. LANDIS Pro and LANDIS II models project future landscapes by simulating tree growth, tree species succession, disease, insects, fire, wind, and management disturbance. Landscape Builder uses inventory plot attributes from the FIA inventory database, FIA unit map, National Forest type map, National Forest size class map, land cover map, and landform map to assign FIA plot attributes to raster pixels representing a real forest landscape. In addition to creating a detailed map of current (initial forest landscape conditions, the software produces specific files required for use in LANDIS Pro 7.0 or LANDIS II format. Other tools include the ability to create a dominant species and age-class map from previously created LANDIS maps, a tool to create a dominant species and age-class map from a stand map and field plot data, and a tool to convert between Esri ascii rasters and Erdas file format types.

  6. Re-thinking residential mobility

    Science.gov (United States)

    van Ham, Maarten; Findlay, Allan M.

    2015-01-01

    While researchers are increasingly re-conceptualizing international migration, far less attention has been devoted to re-thinking short-distance residential mobility and immobility. In this paper we harness the life course approach to propose a new conceptual framework for residential mobility research. We contend that residential mobility and immobility should be re-conceptualized as relational practices that link lives through time and space while connecting people to structural conditions. Re-thinking and re-assessing residential mobility by exploiting new developments in longitudinal analysis will allow geographers to understand, critique and address pressing societal challenges. PMID:27330243

  7. Information Processing and Creative Thinking Abilities of Residential and Non-Residential School Children

    Directory of Open Access Journals (Sweden)

    Atasi Mohanty

    2015-10-01

    Full Text Available This study attempts to assess and compare the residential and non-residential schoolchildren in information-processing skills and creative thinking abilities. A sample of 80 children from Classes 5 and 7 were selected from two types of schools, residential/ashram (02 and non-residential/formal schools (02 in Bolpur subdivision of West Bengal in India where the medium of instruction is Bengali language/mother-tongue. All the children were individually administered the PASS (Planning, Attention, Simultaneous, Successive, Stroop, Matching Familiar Figure Test (MFFT-20, and creative thinking tasks. The residential school children were found to perform better both in information processing and creative thinking tasks. The developmental trend could not be clearly observed due to small sample size, but with increasing age, children were using better processing strategies. Due to ashram environment, creative pedagogy, and various co-curricular activities, the residential school children were found to be more creative than their formal school counterparts. Moreover, some significant positive correlations were found among information processing skills and creative thinking dimensions.

  8. Non-home prepared foods : contribution to energy and nutrient intake of consumers living in two low-income areas in Nairobi

    NARCIS (Netherlands)

    Riet, van 't H.; Hartog, den A.P.; Staveren, van W.A.

    2002-01-01

    Objective: To determine the nutritional importance of non-home prepared foods for men, women and schoolchildren living in two low-income residential areas of Nairobi, and the sources of these non-home prepared foods. Design, setting and subjects: A survey was conducted in Korogocho, a slum area, and

  9. Home on the Range: Host Families for Developmental Disabilities in Wyoming.

    Science.gov (United States)

    Walling, Teresa; Potts, Bridget; Fortune, Jon; Cobb, Ginny L.; Fortune, Barbara

    This report describes the outcomes of a Wyoming program that provides host families for individuals with developmental disabilities. Host families work with certified Medicaid providers of home and community-based services for people with developmental disabilities and provide residential habilitation to an adult who is accepted as a member of…

  10. Improving the thermal integrity of new single-family detached residential buildings: Documentation for a regional database of capital costs and space conditioning load savings

    International Nuclear Information System (INIS)

    Koomey, J.G.; McMahon, J.E.; Wodley, C.

    1991-07-01

    This report summarizes the costs and space-conditioning load savings from improving new single-family building shells. It relies on survey data from the National Association of Home-builders (NAHB) to assess current insulation practices for these new buildings, and NAHB cost data (aggregated to the Federal region level) to estimate the costs of improving new single-family buildings beyond current practice. Space-conditioning load savings are estimated using a database of loads for prototype buildings developed at Lawrence Berkeley Laboratory, adjusted to reflect population-weighted average weather in each of the ten federal regions and for the nation as a whole

  11. Forming Factors And Builder Indicators Of Brand Personality Models In Traditional Retail Traders

    OpenAIRE

    Yunelly Asra; Teguh Widodo

    2017-01-01

    This study aims to find the factors forming and indicator builder model of brand personality of traditional retail traders through measuring the influence of retail mix and culture. The formation of brand personality uses Aaker brand personality dimension to 250 consumers in Bengkalis Regency. The type of research is causal research design. The research variables are brand personality Retail Mix and Brand Personality. Data collection is done by probability sampling with purposive method. Data...

  12. Unintended adverse consequences of introducing electronic health records in residential aged care homes.

    Science.gov (United States)

    Yu, Ping; Zhang, Yiting; Gong, Yang; Zhang, Jiajie

    2013-09-01

    The aim of this study was to investigate the unintended adverse consequences of introducing electronic health records (EHR) in residential aged care homes (RACHs) and to examine the causes of these unintended adverse consequences. A qualitative interview study was conducted in nine RACHs belonging to three organisations in the Australian Capital Territory (ACT), New South Wales (NSW) and Queensland, Australia. A longitudinal investigation after the implementation of the aged care EHR systems was conducted at two data points: January 2009 to December 2009 and December 2010 to February 2011. Semi-structured interviews were conducted with 110 care staff members identified through convenience sampling, representing all levels of care staff who worked in these facilities. Data analysis was guided by DeLone and McLean Information Systems Success Model, in reference with the previous studies of unintended consequences for the introduction of computerised provider order entry systems in hospitals. Eight categories of unintended adverse consequences emerged from 266 data items mentioned by the interviewees. In descending order of the number and percentage of staff mentioning them, they are: inability/difficulty in data entry and information retrieval, end user resistance to using the system, increased complexity of information management, end user concerns about access, increased documentation burden, the reduction of communication, lack of space to place enough computers in the work place and increasing difficulties in delivering care services. The unintended consequences were caused by the initial conditions, the nature of the EHR system and the way the system was implemented and used by nursing staff members. Although the benefits of the EHR systems were obvious, as found by our previous study, introducing EHR systems in RACH can also cause adverse consequences of EHR avoidance, difficulty in access, increased complexity in information management, increased documentation

  13. Building America Best Practices Series Volume 15: 40% Whole-House Energy Savings in the Hot-Humid Climate

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, Michael C.; Gilbride, Theresa L.; Hefty, Marye G.; Cole, Pamala C.; Adams, Karen; Noonan, Christine F.

    2011-09-01

    This best practices guide is the 15th in a series of guides for builders produced by PNNL for the U.S. Department of Energy’s Building America program. This guide book is a resource to help builders design and construct homes that are among the most energy-efficient available, while addressing issues such as building durability, indoor air quality, and occupant health, safety, and comfort. With the measures described in this guide, builders in the hot-humid climate can build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers. The best practices described in this document are based on the results of research and demonstration projects conducted by Building America’s research teams. Building America brings together the nation’s leading building scientists with over 300 production builders to develop, test, and apply innovative, energy-efficient construction practices. Building America builders have found they can build homes that meet these aggressive energy-efficiency goals at no net increased costs to the homeowners. Currently, Building America homes achieve energy savings of 40% greater than the Building America benchmark home (a home built to mid-1990s building practices roughly equivalent to the 1993 Model Energy Code). The recommendations in this document meet or exceed the requirements of the 2009 IECC and 2009 IRC and those requirements are highlighted in the text. Requirements of the 2012 IECC and 2012 IRC are also noted in text and tables throughout the guide. This document will be distributed via the DOE Building America website: www.buildingamerica.gov.

  14. Building America Best Practices Series Volume 16: 40% Whole-House Energy Savings in the Mixed-Humid Climate

    Energy Technology Data Exchange (ETDEWEB)

    Baechler, Michael C.; Gilbride, Theresa L.; Hefty, Marye G.; Cole, Pamala C.; Adams, Karen; Butner, Ryan S.; Ortiz, Sallie J.

    2011-09-01

    This best practices guide is the 16th in a series of guides for builders produced by PNNL for the U.S. Department of Energy’s Building America program. This guide book is a resource to help builders design and construct homes that are among the most energy-efficient available, while addressing issues such as building durability, indoor air quality, and occupant health, safety, and comfort. With the measures described in this guide, builders in the mixed-humid climate can build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers. The best practices described in this document are based on the results of research and demonstration projects conducted by Building America’s research teams. Building America brings together the nation’s leading building scientists with over 300 production builders to develop, test, and apply innovative, energy-efficient construction practices. Building America builders have found they can build homes that meet these aggressive energy-efficiency goals at no net increased costs to the homeowners. Currently, Building America homes achieve energy savings of 40% greater than the Building America benchmark home (a home built to mid-1990s building practices roughly equivalent to the 1993 Model Energy Code). The recommendations in this document meet or exceed the requirements of the 2009 IECC and 2009 IRC and those requirements are highlighted in the text. Requirements of the 2012 IECC and 2012 IRC are also noted in text and tables throughout the guide. This document will be distributed via the DOE Building America website: www.buildingamerica.gov.

  15. Determining the market value of high-rise residential buildings based on evaluation of consumer properties

    Directory of Open Access Journals (Sweden)

    Kolobova Svetlana

    2018-01-01

    Full Text Available As you know, high-rise construction is an indicator of the practical implementation of advanced innovative technologies in the construction industry of the country. High-rise building inevitably comes to the big cities, in connection with the shortage and value of land. The life cycle of any construction project, including high-rise buildings consists of chains: of engineering survey - design-construction-operation. In the process of operation of a tall building, decisions about major repairs or reconstruction of a building are made for decision-making on further use. This article describes methods of assessing the consumer quality of high-rise residential buildings and the establishment of prices based on consumer characteristics of a tall residential building. It is proposed to assess the premises under their quality characteristics. The study was conducted to establish the influence of individual, comprehensive and integral indicators of comparable quality for effective quality living spaces. Simultaneously, there was established a relationship of quality with the consumer cost of housing, ultimately with the potential needs of owners, tenants of the home, lessor dwelling, or buyers of residential properties and other participants in the residential real estate market. This relationship further creates consumer requirements to quality standard of premises at a certain stage of socio-economic development.

  16. Determining the market value of high-rise residential buildings based on evaluation of consumer properties

    Science.gov (United States)

    Kolobova, Svetlana

    2018-03-01

    As you know, high-rise construction is an indicator of the practical implementation of advanced innovative technologies in the construction industry of the country. High-rise building inevitably comes to the big cities, in connection with the shortage and value of land. The life cycle of any construction project, including high-rise buildings consists of chains: of engineering survey - design-construction-operation. In the process of operation of a tall building, decisions about major repairs or reconstruction of a building are made for decision-making on further use. This article describes methods of assessing the consumer quality of high-rise residential buildings and the establishment of prices based on consumer characteristics of a tall residential building. It is proposed to assess the premises under their quality characteristics. The study was conducted to establish the influence of individual, comprehensive and integral indicators of comparable quality for effective quality living spaces. Simultaneously, there was established a relationship of quality with the consumer cost of housing, ultimately with the potential needs of owners, tenants of the home, lessor dwelling, or buyers of residential properties and other participants in the residential real estate market. This relationship further creates consumer requirements to quality standard of premises at a certain stage of socio-economic development.

  17. Integrated Real-Virtuality System and Environments for Advanced Control System Developers and Machines Builders

    OpenAIRE

    Hussein, Mohamed

    2008-01-01

    The pace of technological change is increasing and sophisticated customer driven markets are forcing rapid machine evolution, increasing complexity and quality, and faster response. To survive and thrive in these markets, machine builders/suppliers require absolute customer and market orientation, focusing on .. rapid provision of solutions rather than products. Their production systems will need to accommodate unpredictable changes while maintaining financial and operational efficiency with ...

  18. The Role of Neighborhood Characteristics in the Adoption and Frequency of Working at Home: Empirical Evidence from Northern California

    OpenAIRE

    Tang, Wei; Mokhtarian, Patricia; Handy, Susan

    2008-01-01

    Working at home is widely viewed as a useful travel-reduction strategy, and partly for that reason, considerable research related to telecommuting and home-based work has been conducted in the last two decades. The contribution of this study is to examine the effect of residential neighborhood built environment (BE) factors on working at home. Using data from a survey of eight neighborhoods in Northern California, we develop a multinomial logit (MNL) model of work-at-home (WAH) frequency. Pot...

  19. Sensor technology for smart homes.

    Science.gov (United States)

    Ding, Dan; Cooper, Rory A; Pasquina, Paul F; Fici-Pasquina, Lavinia

    2011-06-01

    A smart home is a residence equipped with technology that observes the residents and provides proactive services. Most recently, it has been introduced as a potential solution to support independent living of people with disabilities and older adults, as well as to relieve the workload from family caregivers and health providers. One of the key supporting features of a smart home is its ability to monitor the activities of daily living and safety of residents, and in detecting changes in their daily routines. With the availability of inexpensive low-power sensors, radios, and embedded processors, current smart homes are typically equipped with a large amount of networked sensors which collaboratively process and make deductions from the acquired data on the state of the home as well as the activities and behaviors of its residents. This article reviews sensor technology used in smart homes with a focus on direct environment sensing and infrastructure mediated sensing. The article also points out the strengths and limitations of different sensor technologies, as well as discusses challenges and opportunities from clinical, technical, and ethical perspectives. It is recommended that sensor technologies for smart homes address actual needs of all stake holders including end users, their family members and caregivers, and their doctors and therapists. More evidence on the appropriateness, usefulness, and cost benefits analysis of sensor technologies for smart homes is necessary before these sensors should be widely deployed into real-world residential settings and successfully integrated into everyday life and health care services. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  20. Residential building codes, affordability, and health protection: a risk-tradeoff approach.

    Science.gov (United States)

    Hammitt, J K; Belsky, E S; Levy, J I; Graham, J D

    1999-12-01

    Residential building codes intended to promote health and safety may produce unintended countervailing risks by adding to the cost of construction. Higher construction costs increase the price of new homes and may increase health and safety risks through "income" and "stock" effects. The income effect arises because households that purchase a new home have less income remaining for spending on other goods that contribute to health and safety. The stock effect arises because suppression of new-home construction leads to slower replacement of less safe housing units. These countervailing risks are not presently considered in code debates. We demonstrate the feasibility of estimating the approximate magnitude of countervailing risks by combining the income effect with three relatively well understood and significant home-health risks. We estimate that a code change that increases the nationwide cost of constructing and maintaining homes by $150 (0.1% of the average cost to build a single-family home) would induce offsetting risks yielding between 2 and 60 premature fatalities or, including morbidity effects, between 20 and 800 lost quality-adjusted life years (both discounted at 3%) each year the code provision remains in effect. To provide a net health benefit, the code change would need to reduce risk by at least this amount. Future research should refine these estimates, incorporate quantitative uncertainty analysis, and apply a full risk-tradeoff approach to real-world case studies of proposed code changes.