WorldWideScience

Sample records for reserve component forces

  1. Air Force Organizational Transformation: Merging the Active and Reserve Components

    National Research Council Canada - National Science Library

    Warren, Jonathan

    2005-01-01

    .... These include the active associate, reserve associate, and blended unit concepts. Finally, it provides a recommendation as to which concept will best meet the future warfighting needs of the Air Force.

  2. An Investigation of B-2 Pilot Force Reserve Component Augmentation

    National Research Council Canada - National Science Library

    Mathers, Russell

    2001-01-01

    ... to enter the major airline industry Due to the resulting limited number of B-2 instructor pilots the Air Force contracted for civilian B-2 academic instructors who are not as qualified to instruct...

  3. A Methodology for Modeling the Flow of Military Personnel Across Air Force Active and Reserve Components

    Science.gov (United States)

    2016-01-01

    capability to estimate the historic impact of changes in economic conditions on the flows of labor into, between, and out of the Air Force active...C O R P O R A T I O N Research Report A Methodology for Modeling the Flow of Military Personnel Across Air Force Active and Reserve Components...or considered about the effect that those policies might have on personnel flows into and out of other components. The degree to which this is

  4. Reserve Component Programs. Fiscal Year 1999 Report of the Reserve Forces Policy Board

    Science.gov (United States)

    2000-03-01

    Heavy Equipment Truck UH-1 Helicopter AH-1 Attack Helicopter PVS-5 Night Vision Goggles Army Reserve Dolly Sets Yard Truck Maintenance Contact...border collie instead of a propane canon, and agri- cultural outsourcing with 4-H sheep grazing. The Marine Corps Reserve continues to increase

  5. National Guard and Reserves: Air Force Needs to Consistently Assess Personnel Requirements to Appropriately Size Its Headquarters Reserve Components

    Science.gov (United States)

    2016-08-01

    Columbia, Puerto Rico , the Virgin Islands, and Guam also have National Guard forces that can be activated for federal missions. Over the same period...the 54 Joint Force Headquarters – State, located in each state, the District of Columbia, Puerto Rico , the Virgin Islands, and Guam, is comprised of... currency reviews be performed in conjunction with the biannual application of personnel assessment standards. Officials from the Office of the

  6. May 2003 Status of Forces Survey of Reserve Component Members: Tabulations of Responses

    National Research Council Canada - National Science Library

    2003-01-01

    ...). HRSAP is designed to measure the attitudes and opinions of the entire DoD community--Active and Reserve Service members, their families and DoD civilian--on the full range of personnel issues...

  7. Assessment of DoD-Provided Healthcare for Members of the United States Armed Forces Reserve Components

    Science.gov (United States)

    2014-10-08

    The TRICARE Dental Program covers the following services: • exams, cleanings, fluorides, sealants , and x-rays, • fillings, including white fillings...establish that programs will be in place to support the medical and dental readiness of Reserve Component (RC) service members so they comply with... dental care to RC service members for all wounds, illnesses, and injuries incurred or aggravated in the line of duty until they have recovered. Reserve

  8. Reserve Component Programs, Fiscal Year 1991

    Science.gov (United States)

    1992-02-28

    utilizing WMrcha’t Marine Academy gr , ,ates and Naval Reserve Officer Training Course S’(NROTC)/Student Incentive Progrim (SIP) graduates from state...personnel gr , atly enhances the mobilization and combat readiness of the Total Force. Several new medical programs were implemented by the Reserve components...Defense Force Chief of Joint Staff, Defense Command * Mendez, Honorable Enrique Jr., M.D. Norway Assistant Secretary of Defense for Health Affairs

  9. Developing Senior Leaders for the Reserve Components

    Science.gov (United States)

    2017-01-01

    For more information on the Forces and Resources Policy Center, see http://www.rand.org/nsrd/ndri/centers/frp.html or contact the director (contact information is provided on the web page ). ...some combination of experiences, education, and personal development. Each has an extensive concept of develop- ment—how they define it, what ...policy. First, in what ways can the develop- ment of RC senior leaders be improved? Second, in what ways can reserve component leader development

  10. Transforming the Reserve Component: Four Essays

    National Research Council Canada - National Science Library

    Binnendijk, Hans; Baranick, Michael J; Bell, Raymond E., Jr; Cordero, Gina; Duncan, Stephen M; Holshek, Christopher; Wentz, Larry

    2005-01-01

    This volume contains four essays on various aspects of the Reserve Component. We publish it at a time when Reserves are serving overseas at historically high rates and when new missions like homeland security demand their attention...

  11. Active Component Responsibility in Reserve Component Pre- and Postmobilization Training

    Science.gov (United States)

    2015-01-01

    President Lyndon Johnson refused to mobi- lize the RCs (MacCarley, 2012, pp. 38–39). 8 Active Component Responsibility in Reserve Component...ARFORGENwhitePaper1aug2011v3g2g.pdf Pernin, Christopher G., Dwayne M. Butler, Louay Constant, Lily Geyer, Duncan Long, Dan Madden, John E. Peters, James D. Powers

  12. Optimization of Marine Forces Reserve Equipment Redistribution

    Science.gov (United States)

    2016-06-01

    industry as an example. Bertrand and Bookbinder begin with a basic supply chain logistics model of a large warehouse supplying a number of retail...solutions, and perform fast sensitivity analysis on the competing objectives. 14. SUBJECT TERMS Optimization, Marine Forces Reserve, redistribution...reallocation, equipment supply , logistics 15. NUMBER OF PAGES 61 16. PRICE CODE 17. SECURITY CLASSIFICATION OF REPORT Unclassified 18. SECURITY

  13. 78 FR 70542 - Reserve Forces Policy Board (RFPB); Notice of Federal Advisory Committee Meeting

    Science.gov (United States)

    2013-11-26

    ... identification of Defense Support of Civilian Authorities requirements. The Subcommittee on Personnel plans to..., issues impacting reserve organizations, the right balance of Active and Reserve Component forces, and...

  14. Reserve Component Personnel Issues: Questions and Answers

    Science.gov (United States)

    2017-01-18

    of one day of basic pay for each unit training assembly ( UTA ) they attend. A UTA is generally a four-hour period of instruction, and there are usually...training assembly ( UTA ), one point for each day of annual training (AT), and one point for each day of active duty. Points can also be earned for completing... on the vitality of the reserve components, such as funding, equipment, and personnel policy. This report is designed to provide an overview of key

  15. Improved Effectiveness of Reserve Forces During Reserve Duty Training.

    Science.gov (United States)

    Treadaway, Harry H.

    The problem areas of motivation, job enrichment, recruiting, and retention are addressed from the viewpoint of the behavioral scientist. Special attention is given to relating job enrichment and motivation techniques, as successfully demonstrated in industry, to the United State Army Reserve. Research method utilized was a literature review…

  16. 76 FR 80904 - Reserve Forces Policy Board (RFPB); Member Solicitation

    Science.gov (United States)

    2011-12-27

    ... of the Secretary Reserve Forces Policy Board (RFPB); Member Solicitation AGENCY: Office of the Secretary of Defense Reserve Forces Policy Board, Department of Defense. ACTION: Notice of Advisory... solicitation of the Reserve Forces Policy Board (RFPB). FOR FURTHER INFORMATION CONTACT: LtCol Ken Olivo...

  17. 2007 Posture Statement, Army Reserve: An Operational Force

    National Research Council Canada - National Science Library

    Stultz, Jack C

    2007-01-01

    The 2007 Army Reserve Posture Statement describes how the Army Reserve continues to transform from a strategic reserve to an operational force, meeting today's challenges as it better prepares for future uncertainties...

  18. Multiple sclerosis among service members of the active and reserve components of the U.S. Armed Forces and among other beneficiaries of the Military Health System, 2007-2016.

    Science.gov (United States)

    Williams, Valerie F; Stahlman, Shauna; Ying, Saixia

    2017-08-01

    During 2007-2016, a total of 2,031 active component service members received incident diagnoses of multiple sclerosis (MS), for an overall unadjusted incidence rate of 14.9 cases per 100,000 p-yrs. The average overall unadjusted rate among reserve/guard members during this surveillance period was 6.9 cases per 100,000 persons. In both components, women had a higher overall incidence of MS than men across all race/ethnicity groups. Overall rates of MS were highest among non-Hispanic black service members. Crude annual incidence rates among active component members decreased slightly during 2007-2016, while rates among reserve/guard members were relatively stable. Among active component members, the annual female-to-male incidence ratios decreased during the 10-year period (3.7:1 in 2007 to 2.5:1 in 2016). Annual numbers of incident cases of MS decreased among non-service member Military Health System beneficiaries during this period. The median age at MS case-defining diagnosis was 32 years among active component members, 37 years among reserve/guard members, and 48 years among non-service member beneficiaries. The median time intervals between initial presentation and case-defining MS-related encounter ranged from 15 days among reserve/guard component members to 20 days among active component service members. This study makes a useful contribution to the literature on temporal changes in the incidence of MS by sex and race/ethnicity.

  19. Handbook of force transducers. Principles and components

    Energy Technology Data Exchange (ETDEWEB)

    Stefanescu, Dan Mihai [Romanian Measurement Society, Bucharest (Romania)

    2011-07-01

    Part I introduces the basic ''Principles and Methods of Force Measurement'' according to a classification into a dozen of force transducers types: resistive, inductive, capacitive, piezoelectric, electromagnetic, electrodynamic, magnetoelastic, galvanomagnetic (Hall-effect), vibrating wires, (micro)resonators, acoustic and gyroscopic. Two special chapters refer to force balance techniques and to combined methods in force measurement. Part II discusses the ''(Strain Gauge) Force Transducers Components'', evolving from the classical force transducer to the digital / intelligent one, with the incorporation of three subsystems (sensors, electromechanics and informatics). The elastic element (EE) is the ''heart'' of the force transducer and basically determines its performance. A 12-type elastic element classification is proposed (stretched / compressed column or tube, bending beam, bending and/or torsion shaft, middle bent bar with fixed ends, shear beam, bending ring, yoke or frame, diaphragm, axial-stressed torus, axisymmetrical and voluminous EE), with emphasis on the optimum location of the strain gauges. The main properties of the associated Wheatstone bridge, best suited for the parametrical transducers, are examined, together with the appropriate electronic circuits for SGFTs. The handbook fills a gap in the field of Force Measurement, both experts and newcomers, no matter of their particular interest, finding a lot of useful and valuable subjects in the area of Force Transducers; in fact, it is the first specialized monograph in this inter- and multidisciplinary field. (orig.)

  20. Naval Reserve Force: Cost and Benefit Analysis of Reducing the Number of Naval Surface Reserve Force Operating Budget Holders

    National Research Council Canada - National Science Library

    Young, Eric

    1997-01-01

    .... This thesis examines one of Commander Naval Surface Reserve Force's initiatives for reducing the current number of Operating Budget holder's Comptroller Departments without sacrificing efficiency...

  1. Sustaining AMEDD Professional Strength in the Reserve Components

    National Research Council Canada - National Science Library

    Fetter, James

    2004-01-01

    ...% Army National Guard 34% Army Reserve and 47% active component. In 2000 concerns were raised about dwindling numbers of doctors dentists physician assistants and nurse anesthetist officers in Army Reserve and Army National Guard...

  2. 2000 SURVEY OF RESERVE COMPONENT PERSONNEL: ADMINISTRATION, DATASETS, AND CODEBOOK

    National Research Council Canada - National Science Library

    Simmons, Robert

    2002-01-01

    ..., satisfaction with aspects of Guard and Reserve life, and other quality of life issues. Together with the 1999 Active Duty Surveys of Members and Spouses, the RCS provide a comprehensive picture of the Total Force...

  3. Force spectroscopy of hepatocytic extracellular matrix components

    Energy Technology Data Exchange (ETDEWEB)

    Yongsunthon, R., E-mail: YongsuntR@Corning.com [Corning Incorporated, SP-FR-01, R1S32D, Corning, NY 14831 (United States); Baker, W.A.; Bryhan, M.D.; Baker, D.E.; Chang, T.; Petzold, O.N.; Walczak, W.J.; Liu, J.; Faris, R.A.; Senaratne, W.; Seeley, L.A.; Youngman, R.E. [Corning Incorporated, SP-FR-01, R1S32D, Corning, NY 14831 (United States)

    2009-07-15

    We present atomic force microscopy and force spectroscopy data of live hepatocytes (HEPG2/C3A liver cell line) grown in Eagle's Minimum Essential Medium, a complex solution of salts and amino acids commonly used for cell culture. Contact-mode imaging and force spectroscopy of this system allowed correlation of cell morphology and extracellular matrix (ECM) properties with substrate properties. Force spectroscopy analysis of cellular 'footprints' indicated that the cells secrete large polymers (e.g., 3.5 {mu}m contour length and estimated MW 1000 kDa) onto their substrate surface. Although definitive identification of the polymers has not yet been achieved, fluorescent-labeled antibody staining has specified the presence of ECM proteins such as collagen and laminin in the cellular footprints. The stretched polymers appear to be much larger than single molecules of known ECM components, such as collagen and heparan sulfate proteoglycan, thus suggesting that the cells create larger entangled, macromolecular structures from smaller components. There is strong evidence which suggests that the composition of the ECM is greatly influenced by the hydrophobicity of the substrate surface, with preferential production and/or adsorption of larger macromolecules on hydrophobic surfaces.

  4. Improving Medical and Dental Readiness in the Reserve Components

    Science.gov (United States)

    2012-01-01

    Dental sealants , remineralization therapy, and chewing of xylitol gum are effective for preventing and reversing early signs of dental decay. The...Improving Medical and Dental Readiness in the Reserve Components A s an integral part of the U.S. military, the reserve components (RCs) are...limit their ability to carry out their duties, whether in garrison or deployed. Medically ready reservists require less medical and dental support

  5. Optimal Location of Marine Forces Reserve Units by Demographics

    Science.gov (United States)

    2014-06-01

    GA Naval Air Station Atlanta, GA Robins Air Force Base/Warner Robins, GA Dobbins Army Reserve Base, GA Forest Park, GA Rome, GA a31 Marine...Island Arsenal, IL a65 Grissom Army Reserve Base/ Peru , IN Indianapolis, IN Terre Haute, IN a66 Perrysburg, OH Selfridge Army National Guard Base

  6. Training and Organization of the U.S. Army Reserve Components: A reference Text for Total Force Trainers and a Guide to Other U.S. Military Services, 1988-1989

    Science.gov (United States)

    1989-06-01

    Crisis and many served in Vietnam. Today, there are 12,000 membe s of the Selected Reserve serving in virtually all Coast Guard missioh areas. 2...emergency health and sanitation efforts. Since its inception, the PHS and its Commissioned Corps have witnessed and played a major role in virtually ...initiatives and programs carried out by the following staff offices within the Office of the Asistant Secretary for Health: o The Office of Disease

  7. 77 FR 50087 - Reserve Forces Policy Board (RFPB); Notice of Meeting

    Science.gov (United States)

    2012-08-20

    ... of the Secretary Reserve Forces Policy Board (RFPB); Notice of Meeting AGENCY: Reserve Forces Policy... Reserve Forces Policy Board (RFPB) will take place. DATES: Wednesday, September 5, 2012, from 8 a.m. to 4... (Facsimile), [email protected] . Mailing address is Reserve Forces Policy Board, 5113 Leesburg Pike, Suite 601...

  8. Jet Exit Rig Six Component Force Balance

    Science.gov (United States)

    Castner, Raymond; Wolter, John; Woike, Mark; Booth, Dennis

    2012-01-01

    A new six axis air balance was delivered to the NASA Glenn Research Center. This air balance has an axial force capability of 800 pounds, primary airflow of 10 pounds per second, and a secondary airflow of 3 pounds per second. Its primary use was for the NASA Glenn Jet Exit Rig, a wind tunnel model used to test both low-speed, and high-speed nozzle concepts in a wind tunnel. This report outlines the installation of the balance in the Jet Exit Rig, and the results from an ASME calibration nozzle with an exit area of 8 square-inches. The results demonstrated the stability of the force balance for axial measurements and the repeatability of measurements better than 0.20 percent.

  9. Total Army Cyber Mission Force: Reserve Component Integration

    Science.gov (United States)

    2016-02-16

    Traditional Part-Time Soldiers C2 Command and Control METL Mission Essential Task List CEH Certified Ethical Hacker MI Guard’s Cyber Backbone Network CMF...16 RC Sources and Resourcing Authorities (12301-12304) .......................................................... 16 End...terrorism and it received the highest priority for allocation of intelligence resources . In 2013, the Director National Intelligence (DNI) identified

  10. Suitability of Missions for the Air Force Reserve Components

    Science.gov (United States)

    2014-01-01

    Antenna Systems 116 9.2 123 6.9 1C21 Combat Control 492 9.2 35 6.1 3 1.7 1A81 Airborne Crypto Language Anal 1,365 8.9 79 5.2 28...requirements, represented by the RAP in the case of the F-16 and comparable currency and proficiency requirements for mobility units. Deployment demand and

  11. Ready, Reliable, and Relevant: The Army Reserve Component as an Operational Reserve

    Science.gov (United States)

    2015-05-21

    Kurt A. Rorvik 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Advanced Military...Consequence Management Response Force CEF Contingency Expeditionary Force CJCS Chairman of the Joint Chiefs of Staff CMH Center of Military...Treaty Organization vii NCO Non-Commissioned Officer NDAA National Defense Authorization Act NGB National Guard Bureau NOS Notification of

  12. 77 FR 4284 - Reserve Forces Policy Board (RFPB); Notice of Advisory Committee Meeting

    Science.gov (United States)

    2012-01-27

    ... of the Secretary Reserve Forces Policy Board (RFPB); Notice of Advisory Committee Meeting AGENCY: Department of Defense, Office of the Secretary of Defense Reserve Forces Policy Board. ACTION: Notice of... Reserve Forces Policy Board (RFPB). DATES: Wednesday, March 7, 2012, from 7:20 a.m.-3:30 p.m. ADDRESSES...

  13. 76 FR 41219 - Reserve Forces Policy Board (RFPB); Cancellation of Meeting

    Science.gov (United States)

    2011-07-13

    ... of the Secretary Reserve Forces Policy Board (RFPB); Cancellation of Meeting AGENCY: Department of Defense; Office of the Secretary of Defense Reserve Forces Policy Board. ACTION: Notice of advisory...) 697-4486 (Voice), (703) 693-5371 (Facsimile), [email protected] . Mailing address is Reserve Forces Policy...

  14. 76 FR 67425 - Reserve Forces Policy Board (RFPB); Notice of Advisory Committee Meeting

    Science.gov (United States)

    2011-11-01

    ... of the Secretary Reserve Forces Policy Board (RFPB); Notice of Advisory Committee Meeting AGENCY: Department of Defense; Office of the Secretary of Defense Reserve Forces Policy Board. ACTION: Notice of... Reserve Forces Policy Board (RFPB). DATES: Tuesday, November 29, 2011, from 7:30 a.m.-3:30 p.m. ADDRESSES...

  15. 77 FR 31590 - Reserve Forces Policy Board (RFPB); Notice of Advisory Committee Meeting

    Science.gov (United States)

    2012-05-29

    ... of the Secretary Reserve Forces Policy Board (RFPB); Notice of Advisory Committee Meeting AGENCY: Department of Defense, Office of the Secretary of Defense Reserve Forces Policy Board. ACTION: Notice of... Reserve Forces Policy Board. DATES: Wednesday, June 13, 2012, from 8:00 a.m.-3:40 p.m. ADDRESSES: Meeting...

  16. 76 FR 56405 - Reserve Forces Policy Board (RFPB); Notice of Advisory Committee Meeting

    Science.gov (United States)

    2011-09-13

    ... of the Secretary Reserve Forces Policy Board (RFPB); Notice of Advisory Committee Meeting AGENCY: Department of Defense; Office of the Secretary of Defense Reserve Forces Policy Board. ACTION: Notice of... Reserve Forces Policy Board (RFPB). DATES: Thursday, October 13, 2011, from 7:30 a.m. to 4:30 p.m...

  17. Tried And True Integrating Active And Reserve Components

    Science.gov (United States)

    2016-02-16

    Components, it has a proven record of success in flying the same operational mission.28 The increased crew ratio maximizes aircraft utilization ...is not a cookie cutter approach. The Integrated Wing cannot be instituted at all bases due to the complex associations, nor is it supposed to

  18. 76 FR 18737 - Reserve Forces Policy Board (RFPB) Member Solicitation

    Science.gov (United States)

    2011-04-05

    ... (RFPB). Background: Secretary of Defense, George C. Marshall, abolished the Civilian Components Policy... Board, thus created, has remained essentially the same in its mission and responsibility for nearly...

  19. The Reserve Forces Impact on Theater Security Cooperation

    Science.gov (United States)

    2013-03-01

    over time. Thucydides wrote about the complex differences between the Spartan agrarian and Athenian trade societies. Hitler’s threat of world...was part of a task force to spread peace and democracy .”43 He strongly believes that his role as the member of a community gives him a “dimension

  20. Effects of Capillary Forces and Adsorption on Reserves Distribution

    DEFF Research Database (Denmark)

    Shapiro, Alexander; Stenby, Erling Halfdan

    1996-01-01

    The purpose of this study is to evaluate the effects of capillary forces and adsorption on the distribution of a hydrocarbon mixture in an oil-gas-condensate reservoir. These effects consist in the precipitation of the liquid phase in thin pores and on the internal surface of the reservoir rock...

  1. Evaluation of cutting force uncertainty components in turning

    DEFF Research Database (Denmark)

    Axinte, Dragos Aurelian; Belluco, Walter; De Chiffre, Leonardo

    2000-01-01

    A procedure is proposed for the evaluation of those uncertainty components of a single cutting force measurement in turning that are related to the contributions of the dynamometer calibration and the cutting process itself. Based on an empirical model including errors form both sources, the unce...

  2. Reserve Component Programs Fiscal Year 1993 Report of the Reserve Forces Policy Board

    Science.gov (United States)

    1994-01-01

    Thurber suggested, "Somewhere, just be seized, or that vie%-n may never be realizeda out of sight, the Unicorns are gathering." The Bottom-Up Review...projects a shortfall of $2.8 "million in 1994 as a result of Defense Finance and Accounting fees and simulator procurement. R 7..% ’:The Air National Guard...Defense Finance and At some future time, deoxyribonucleic acid Accounting Service in July 1993, replacing the (DNA) profile analysis is expected to

  3. Reserve Component Programs, Fiscal Year 1992: Annual Report of the Reserve Forces Policy Board

    Science.gov (United States)

    1993-01-01

    reduce the shortage of junior-grade and mid- quickly on the issue of homosexuals in the career officers in Selccted Rescrvc units. military, especially...52 Homosexuals in the Military...operational detachments, and CARIBBEAN 92-4, conducted in Grenada during space shuttle support, as well as various joint July 1992. Minor engineer efforts

  4. 2011 Workplace and Equal Opportunity Survey of Reserve Component Members: Overview Report

    Science.gov (United States)

    2014-02-06

    harassment and discrimination within the Reserve components. This overview report discusses findings from the 2011 Workplace and Equal Opportunity...developed for the 1996 Equal Opportunity Survey (1996 EOS). The 1996 EOS provided estimates of racial/ethnic-related harassment and discrimination ...Perceived Undue Punishment (2 Items) •Providers/Authorities Discrimination (3 Items) 2011 Workplace and Equal Opportunity Survey of Reserve Component

  5. Support for the 21st-Century Reserve Force: Insights on Facilitating Successful Reintegration for Citizen Warriors and their Families

    Science.gov (United States)

    2013-01-01

    families. 2 Support for the 21st-Century Reserve Force Active Component, guard personnel and reservists must return to their civilian jobs , hence...the job that they would have attained had they not been absent for military service, with the same seniority, status, pay, and benefits.10 The...their distance from military installations and other DoD infrastructure but also in their embeddedness in the local com- munity. Unlike many active

  6. National Guard Special Forces: Enhancing the Contributions of Reserve Component Army Special Operations Forces

    Science.gov (United States)

    2012-01-01

    Jackson, MS Glen Arm, MD 20 Jackson, MS Citronelle , AL Decatur, AL 20 Ft Payne, AL Louisville, KY Figure 2.3 Geographical Distribution of ARNG Special...Grenada, MS HQ/2/20th SFG BSC/2/20th SFG Jackson, MS B/1/20th SFG Citronelle , AL DET 1/B/1/20th Decatur, AL C/3/20th SFG Wauchula, FL A/3/20th SFG

  7. 2004 Workplace and Gender Relations Survey of Reserve Component Members: Tabulations of Responses

    National Research Council Canada - National Science Library

    2005-01-01

    The 2004 Workplace and Gender Relations Survey of Reserve Component Members was designed to both estimate the level of sexual harassment and provide information on a variety of consequences of sexual harassment...

  8. The United States Marine Corps Reserve: Reorganization for an Integrated Force

    Science.gov (United States)

    2015-04-28

    Reserve: A Policy and Historical Context and the Way Forward, Joint Forces Quarterly, 59, (4th quarter 2010),15. http://www.army.mil/ article /45817...Wadsworth Cengage Learning, 2010. Garcia, Federico E. and David L. Reese. Monetary Incentives in the Selected Marine Corps Reserve. Crm . Vol. 96

  9. The effects of dorso-lumbar motion restriction on the ground reaction force components during running.

    Science.gov (United States)

    Morley, Joseph J; Traum, Edward

    2016-04-01

    The effects of restricting dorso-lumbar spine mobility on ground reaction forces in runners was measured and assessed. A semi-rigid cast was used to restrict spinal motion during running. Subjects ran across a force platform at 3.6 m/s, planting the right foot on the platform. Data was collected from ten running trials with the cast and ten without the cast and analysed. Casted running showed that the initial vertical heel strike maximum was increased (p fascia contribute to load transfer between joints and body segments. Experimentally restricting spinal motion during running results in measurable and repeatable alterations in ground reaction force components. Alterations in load transfer due to decreased spinal motion may be a factor contributing to selected injuries in runners. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. An Investigation of the Posterior Component of Occlusal Force

    Science.gov (United States)

    1994-05-01

    the dental arch across the midline and examined mandibula deformation in subjects with osseointegrated implants . The authors found that, with maximum...the 58 tongue and cheek musculature. Future studies may consider examining interdental forces between a natural dentition and osseointegrated implants ... dental occlusion forces, and 4. periodontal membrane forces. A stable occlusion would purportedly result when balance in terms of the magnitude

  11. Cognitive and Teaching Style Preferences of Officers Attending the Air Force Reserve Officer Training Instructor Course

    Science.gov (United States)

    Kraska, Marie; Harris, Stephen

    2007-01-01

    The purpose of this study was to investigate the relationship between the cognitive style and teaching style preferences of instructors enrolled in the Reserve Officer Training Corps instructor course at the Academic Instructor School at Maxwell Air Force base. Sixty-five cases were examined for two research questions: (1) To what extent is there…

  12. 76 FR 76811 - Stakeholders Meeting Regarding Ready Reserve Force (RRF) Ship Manager Contract Program

    Science.gov (United States)

    2011-12-08

    ... consideration of possible changes to the Ship Manager Contract requirements for maintaining and operating MarAd... Meeting Regarding Ready Reserve Force (RRF) Ship Manager Contract Program AGENCY: Maritime Administration.... Independent contractor issues. Consideration of participation in Voluntary Intermodal Sealift Agreement...

  13. Principal Component Surface (2011) for St. Thomas East End Reserve, St. Thomas

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This image represents a 0.3x0.3 meter principal component analysis (PCA) surface for areas the St. Thomas East End Reserve (STEER) in the U.S. Virgin Islands (USVI)....

  14. The Reserve Component Automation System (RCAS) -- A Case Study in the Evolution of an Information Management System

    National Research Council Canada - National Science Library

    Brady, George

    1998-01-01

    The Reserve Component Automation System (RCAS) is a Wide Area/Local Area Network system designed to provide automation support for the Reserve Components' mobilization management and sustaining-base operations...

  15. ART Or AGR: Deciphering Which Reserve Program is Best Suited for Today’s Total Force Structure

    Science.gov (United States)

    2016-02-01

    independent arbitrator ruled that Whiteman Air Force Base violated its contract with American Federation of Government Employees (AFGE) Local 2361...Section CSAF - Chief of Staff of the Air Force DODI - Department of Defense Instruction FECA - Federal Employees Compensation Act FEGLI - Federal ...time federal civil service employees, assigned to an Air Force Reserve unit, and also required to occupy an equivalent Reserve military position with

  16. Strategic Sealift. Summary of Workshop on Crewing the Ready Reserve Force

    Science.gov (United States)

    1994-06-01

    177 Strategic Selfi ~ft Appendix III Crewing the Ready Reserve Force-RADM Carl J. Selberlch, USN (Ret.), American President Lines, Ltd. We at APL as a...their work record through articles and discharges. These functions give rise to a potentially valuable manpower augmentation tool that could be made...community to this proposal, and trust it will be seen no as an invasion of privacy but solely as a tool to be made available to the unions to assist in

  17. Static Force-Deflection Properties of Automobile Steering Components

    Science.gov (United States)

    1987-06-01

    This report provides the static force-deflection test results for 28 steering columns and 24 steering wheels used in domestic and import passener cars from model year 1975 to 1985. The steering columns and wheels tested include approzimately 90 perce...

  18. Organizing Joint Forces for Information Operations: The Viability of a Joint Force Information Operations Component Commander

    National Research Council Canada - National Science Library

    Seinwill, Jeffrey

    1999-01-01

    ...) as the best way to integrate information operations (IO) into joint forces. Though attractive on the surface, detailed investigation demonstrates that the JFIOCC is not a viable structure for joint force IO...

  19. The association between blood pressure components and cognitive functions and cognitive reserve.

    Science.gov (United States)

    Alipour, Houman; Goldust, Mohamad

    2016-01-01

    Hypertension exerts a subtle impact on the brain that is revealed by diminished cognitive function. This study aimed at evaluating the association between blood pressure components and cognitive functions and cognitive reserve. In this cross-sectional study, 500 subjects from general population were evaluated. All neuropsychological tests were negatively associated with age; memory and executive function were also positively related with education. The hypertensives (HT) were less efficient than the normotensives (NT) in the test of memory with interference at 10 s (MI-10) (-32%, p = 0.043), clock drawing test (CLOX) (-26%, p cognitive reserve index (CRI) was 8% lower in the HT (p = 0.04) and was predicted by higher pulse BP (OR 0.86, p cognition, higher values of systolic BP being associated to impaired cognitive function.

  20. A Modeling Framework to Investigate the Radial Component of the Pushrim Force in Manual Wheelchair Propulsion

    Directory of Open Access Journals (Sweden)

    Ackermann Marko

    2015-01-01

    Full Text Available The ratio of tangential to total pushrim force, the so-called Fraction Effective Force (FEF, has been used to evaluate wheelchair propulsion efficiency based on the fact that only the tangential component of the force on the pushrim contributes to actual wheelchair propulsion. Experimental studies, however, consistently show low FEF values and recent experimental as well as modelling investigations have conclusively shown that a more tangential pushrim force direction can lead to a decrease and not increase in propulsion efficiency. This study aims at quantifying the contributions of active, inertial and gravitational forces to the normal pushrim component. In order to achieve this goal, an inverse dynamics-based framework is proposed to estimate individual contributions to the pushrim forces using a model of the wheelchair-user system. The results show that the radial pushrim force component arise to a great extent due to purely mechanical effects, including inertial and gravitational forces. These results corroborate previous findings according to which radial pushrim force components are not necessarily a result of inefficient propulsion strategies or hand-rim friction requirements. This study proposes a novel framework to quantify the individual contributions of active, inertial and gravitational forces to pushrim forces during wheelchair propulsion.

  1. Geological component in the formation of natural - reserve fund of Ukraine

    Directory of Open Access Journals (Sweden)

    Manyuk V.V.

    2014-12-01

    Full Text Available The part of geological component of the natural environment in the formation of Natural Reserve Fund of Ukraine, the historical aspects of the origin and development of the geological heritage, as an important part of the environment, as well as the problem of acceptance geodiversity as well as the conservation of biodiversity. It was established that during the long history in countries not only in Europe but also in the world, formed biodiversity strategy in default or unwilling recognition of the need to preserve geodiversity. Underestimating abiotic factors in the development programs of the European environmental network Natura-2000 and EECONET has led to the need to develop special programs and initiatives in the conservation of the lithosphere, atmosphere and hydrosphere. The basic stages of historical development problems of preservation of geological heritage in Ukraine and the world. It is determined that in Ukraine was established May 21, 1910 the first in Russia (which is then part Khortyts'ke Society for Nature Conservation. The Society, based on the initiative of of natural science teachers P.P. Вouzouk, had the goal of nature conservation within the animal, vegetable and mineral kingdoms of nature, and it was spelled out in the Charter of of society. A significant shift towards awareness of the importance of the geological component in the formation of natural reserve fund was effective collaboration with the Department of Environment and Natural Resources in the Dnipropetrovsk region on creation of new protected areas. When conducting a field and office work on reserving areas for new items Natural Heritage, the first fully studied geological and geomorphological structure of these areas. Moreover, the research facility in an unprecedented short time actually bequeathed, that have approved status of natural monuments, landscape reserves and so on.

  2. A six-component force/moment sensor calibration stand

    Science.gov (United States)

    Estlow, Edward G. W.; Kovacevic, Nebojsa

    1990-06-01

    A compact portable stand for calibration of multicomponent internal balances is described. The stand is designed to control/eliminate misalignments between load trains and the balance being calibrated; it generates forces and moments with pneumatic cylinders for all but rolling moment, which is applied with conventional weights. Load application control is discussed, and performance is analyzed. It is noted that the calibration stand has the ability to sense off-axis loads resulting from distortion/deflections due to the primary loading. Having sensed these off-axis loads, the system can be adjusted to minimize or eliminate them while retaining correct alignment of the primary load with the balance.

  3. The Career Job Reservation System. Is the Issuance System Best Serving the Needs of the Air Force?

    Science.gov (United States)

    1990-04-01

    AD-A241 065 (i AIR WAR COLLEGE RESEARCH REPORT THE CAREER JOB RESERVATION SYSTEM- IS THE ISSUANCE SYSTEM BEST SERVING THE NEEDS OF THE AIR FORCE... THE NEEDS OF THE AIR FORCE? by Ernest V. Marshall Lieutenant Colonel, USAF A DEFENSE ANALYTICAL STUDY SUBMITTED TO THE FACULTY IN FULFILLMENT OF THE...EXECUTIVE SUMMARY TITLE: The Career Job Reservation (CJR) Sy3tem--Is it serving the needs of the Air Force? AUTHOR: Ernest V. Marshall, Licutenant

  4. Superior-inferior position of patellar component affects patellofemoral kinematics and contact forces in computer simulation.

    Science.gov (United States)

    Nakamura, Shinichiro; Tanaka, Yoshihisa; Kuriyama, Shinichi; Nishitani, Kohei; Ito, Hiromu; Furu, Moritoshi; Matsuda, Shuichi

    2017-06-01

    Anterior knee pain has been reported as a major postoperative complication after total knee arthroplasty, which may lead to patient dissatisfaction. Rotational alignment and the medial-lateral position correlate with patellar maltracking, which can cause knee pain postoperatively. However, the superior-inferior position of the patellar component has not been investigated. The purpose of the current study was to investigate the effects of the patellar superior-inferior position on patellofemoral kinematics and kinetics. Superior, central, and inferior models with a dome patellar component were constructed. In the superior and inferior models, the position of the patellar component translated superiorly and inferiorly, respectively, by 3mm, relative to the center model. Kinematics of the patellar component, quadriceps force, and patellofemoral contact force were calculated using a computer simulation during a squatting activity in a weight-bearing deep knee bend. In the inferior model, the flexion angle, relative to the tibial component, was the greatest among all models. The inferior model showed an 18.0%, 36.5%, and 22.7% increase in the maximum quadriceps force, the maximum medial patellofemoral force, and the maximum lateral patellofemoral force, respectively, compared with the superior model. Superior-inferior positions affected patellofemoral kinematic and kinetics. Surgeons should avoid the inferior position of the patellar component, because the inferior positioned model showed greater quadriceps and patellofemoral force, resulting in a potential risk for anterior knee pain and component loosening. Copyright © 2017. Published by Elsevier Ltd.

  5. Postdeployment Behavioral Health Screens and Linkage to the Veterans Health Administration for Army Reserve Component Members.

    Science.gov (United States)

    Vanneman, Megan E; Harris, Alex H S; Chen, Cheng; Adams, Rachel Sayko; Williams, Thomas V; Larson, Mary Jo

    2017-08-01

    Approximately three to six months after returning from deployment, military service members complete the Post-Deployment Health Reassessment (PDHRA), which includes screens for alcohol misuse, depression, and posttraumatic stress disorder (PTSD). To determine whether Army Reserve Component (RC) members (Army National Guard and Army Reserve) with positive screening scores on the PDHRA receive needed care, the investigators examined the association between positive scores and enrollment and utilization of care ("linkage") in the Veterans Health Administration (VHA), as well as rescreening scores, diagnosis, and behavioral treatment in VHA. Mixed-effects regression models were used to predict linkage to VHA within six months after RC members (N=73,164) completed the PDHRA, with alcohol misuse, depression, and PTSD screen scores as key independent variables. Regression models were stratified by gender and National Guard versus Reserve status. Among those who linked to VHA (N=25,168), screening scores and subsequent diagnosis and treatment in VHA were also examined. Army RC members with positive PTSD and depression screening scores were more likely than those with negative screens to link to VHA, and most (54%-84%) received VHA treatment once diagnosed. Positive screens for alcohol misuse were associated with linkage to VHA for men but not for women, and treatment rates for alcohol use disorders were relatively low (0%-25%) for both men and women diagnosed as having an alcohol use disorder. The finding that Army RC members with greater indications of behavioral health problems linked to VHA is encouraging. However, more outreach and treatment engagement strategies could be directed to those with alcohol use disorder, particularly women.

  6. RARE COMPONENT OF THE FISH FAUNA OF THE 'SULINSKY' NATIONAL LANDSCAPE RESERVE

    Directory of Open Access Journals (Sweden)

    N. Ja. Rudik-Leuska

    2014-06-01

    Full Text Available Maintenance of biological diversity is the main task of modern biology. At the legislative level, Ukraine has pledged its support in ratifying the "Convention on the conservation of biological diversity." As part of the implementation of environmental policy in Ukraine preservation of rare fish fauna component is the most problematic aspect. The basic conservation lists acting in Ukraine are: Red List of threatened animals of the International Union for Conservation of Nature, Ukrainian Red Book, Annex III of the "Convention on the Protection of wildlife and natural habitats", the Convention on International Trade in Endangered Species of Wild Fauna and Flora, CITES, Washington, 1973. On the territory of Sula Bay located two objects of nature reserve fund - a landscape national reserve "Sulinsky" and National Park "Nizhnesulsky" that emphasizes the importance of this area for fish fauna reproduction. Its territory are spawning areas for almost all lower and middle parts of the Kremenchuk reservoir, ensuring more than half of total commercial catch of the Dnieper cascade. The article describes the species composition of the fish fauna, introduced in protected lists of different levels. The existence of seven such species was established. They belong to four families: four species - for cyprinids and one each - to sturgeon, loaches and catfishes. But we must remember that the priority activities should concern species with the highest conservation status. At the same time, four of them are only protected by Annex III of the "Convention on the Protection of wildlife and natural habitats" as poorly studied. These species require a more thorough study and not necessarily threatened with extinction. Remaining three species are under a real danger of extinction and are protected by the IUCN Red List and Ukrainian Red Book. Starlet also protected by the Convention on International Trade in Endangered Species of Wild Fauna and Flora, CITES. Environmental

  7. The U.S. Air Force Aeromedical Evacuation Mission: A Mission for the Air Reserve Components

    Science.gov (United States)

    2016-02-01

    for one night of lodging for out of town members per UTA .75 With most out of town members driving up the night before to be in place for a 0700 am...had lost all objectivity. Most important, I would like to thank my wife and daughter for the amount of time they allowed me to spend on the...colossal undertaking of completing the ASCS On -Line Master’s Program, of which, this paper is the final culmination. Thank you to my wife, for reading my

  8. Building A Better Force: Regular Army / Reserve Components Integration In The Army Chemical Corps

    Science.gov (United States)

    2016-05-26

    Fort Hood , TX, CPT Mike Larmore cased the colors of the 46th Chemical Company for the last time, signifying its inactivation from the Regular Army... Joshua E. Kastenberg, Shaping US Military Law: Governing a Constitutional Military, (Surrey, England: Ashgate, 2014), 204-5, accessed December 28, 2015...Kastenberg, Joshua E. Shaping US Military Law: Governing a Constitutional Military. Surrey, England: Ashgate, 2014. Accessed December 28, 2015

  9. Costs of Flying Units in Air Force Active and Reserve Components

    Science.gov (United States)

    2013-01-01

    puerto Rico ANG headquarters x Radar Evaluation Squadron x Range Control Squadron x Range Squadron x Range Support Squadron x Rapid Reaction Squadron x...Within operational units, aircrews must meet frequency and currency standards for spe- cific types of sorties and events in order to maintain mission

  10. Requirement for Naval Reserve Component Units Not Assigned to Support Regional Contingencies

    National Research Council Canada - National Science Library

    Gimble, Thomas

    1996-01-01

    Our primary objective was to determine whether a valid need exists for Naval Reserve units and non-unit Reserve personnel who are not assigned to meet the needs of anticipated regional contingencies...

  11. Impact of climate forcing uncertainty and human water use on global and continental water balance components

    OpenAIRE

    Müller Schmied, Hannes; Adam, Linda; Eisner, Stephanie; Fink, Gabriel; Flörke, Martina; Kim, Hyungjun; Oki, Taikan; Portmann, Felix Theodor; Reinecke, Robert; Riedel, Claudia; Song, Qi; Zhang, Jing; Döll, Petra

    2016-01-01

    The assessment of water balance components using global hydrological models is subject to climate forcing uncertainty as well as to an increasing intensity of human water use within the 20th century. The uncertainty of five state-of-the-art climate forcings and the resulting range of cell runoff that is simulated by the global hydrological model WaterGAP is presented. On the global land surface, about 62 % of precipitation evapotranspires, whereas 38 % discharges into oceans...

  12. Reserve Forces: Observations on Recent National Guard Use in Overseas and Homeland Missions and Future Challenges

    National Research Council Canada - National Science Library

    St. Laurent, Janet A

    2004-01-01

    ... than an operational force designed for continued overseas deployments. Moreover, units with certain specialties military police, transportation, and combat arms have been in high demand, resulting in lengthy and repeated deployments...

  13. Forcing the few: Issues from the South African Reserve Bank's legal ...

    African Journals Online (AJOL)

    The SA Reserve Bank is a public company with shareholders in terms of the South African Reserve Bank Act, No. 90 of 1989 (Republic of South Africa 1989). This article considers shareholding in the SA Reserve Bank against the background of legislative amendments promulgated in 2010 and legal action instituted by the ...

  14. 2004 Workplace and Gender Relations Survey of Reserve Component Members: Administration, Datasets, and Codebook

    National Research Council Canada - National Science Library

    2005-01-01

    .... The 2004 WGRR utilized both modes of administration-the Web as well as paper-and-pencil and was designed to document the extent to which Reserve members report experiencing unwanted, uninvited sexual...

  15. Methods and Research for Multi-Component Cutting Force Sensing Devices and Approaches in Machining.

    Science.gov (United States)

    Liang, Qiaokang; Zhang, Dan; Wu, Wanneng; Zou, Kunlin

    2016-11-16

    Multi-component cutting force sensing systems in manufacturing processes applied to cutting tools are gradually becoming the most significant monitoring indicator. Their signals have been extensively applied to evaluate the machinability of workpiece materials, predict cutter breakage, estimate cutting tool wear, control machine tool chatter, determine stable machining parameters, and improve surface finish. Robust and effective sensing systems with capability of monitoring the cutting force in machine operations in real time are crucial for realizing the full potential of cutting capabilities of computer numerically controlled (CNC) tools. The main objective of this paper is to present a brief review of the existing achievements in the field of multi-component cutting force sensing systems in modern manufacturing.

  16. Methods and Research for Multi-Component Cutting Force Sensing Devices and Approaches in Machining

    Directory of Open Access Journals (Sweden)

    Qiaokang Liang

    2016-11-01

    Full Text Available Multi-component cutting force sensing systems in manufacturing processes applied to cutting tools are gradually becoming the most significant monitoring indicator. Their signals have been extensively applied to evaluate the machinability of workpiece materials, predict cutter breakage, estimate cutting tool wear, control machine tool chatter, determine stable machining parameters, and improve surface finish. Robust and effective sensing systems with capability of monitoring the cutting force in machine operations in real time are crucial for realizing the full potential of cutting capabilities of computer numerically controlled (CNC tools. The main objective of this paper is to present a brief review of the existing achievements in the field of multi-component cutting force sensing systems in modern manufacturing.

  17. Eliminate the Army and Air Force Reserves: Building a Robust National Guard to Meet 21st Century Operational Challenges

    Science.gov (United States)

    2016-04-04

    CENTURY REFORM Militia Reform and the Creation of the Army Reserve The Spanish -American War of 1898 is often cited as providing the impetus for...substantial gain in 1908 when Congress established a Medical Reserve Corps to address medical inadequacies identified during Spanish -American War.6...study the matter.26 Lack of transparency in the reserve components bureaucracies prevented the GAO from providing members of Congress a definitive

  18. Sharing the Burden and Risk: An Operational Assessment of the Reserve Components in Operation Iraqi Freedom

    Science.gov (United States)

    2016-10-01

    components and between Services built the foundation of trust and teamwork necessary to prosecute the campaign. In terms of operational communities...integration efforts were cultural, based on outdated organizational practices and attitudes . D. Conclusion In this chapter, IDA looked at ARC...concern with respect to professionalism and discipline were of three types. The first was discussed previously: the difference in attitude toward

  19. Design of mechanical components for vibration reduction in an atomic force microscope.

    Science.gov (United States)

    Kim, Chulsoo; Jung, Jongkyu; Youm, Woosub; Park, Kyihwan

    2011-03-01

    Vibration is a key factor to be considered when designing the mechanical components of a high precision and high speed atomic force microscope (AFM). It is required to design the mechanical components so that they have resonant frequencies higher than the external and internal vibration frequencies. In this work, the mechanical vibration in a conventional AFM system is analyzed by considering its mechanical components, and a vibration reduction is then achieved by reconfiguring the mechanical components. To analyze the mechanical vibration, a schematic of the lumped model of the AFM system is derived and the vibrational influences of the AFM components are experimentally examined. Based on this vibration analysis, a reconfigured AFM system is proposed and its effects are compared to a conventional system through a series of simulations and experiments.

  20. 2012 Workplace and Gender Relations Survey of Reserve Component Members. Tabulation of Responses

    Science.gov (United States)

    2013-05-08

    v L.L-r ,,_..., Approved for publ ic release; d.istribulion unlimited For Open Publication MAY_ z 0 20\\3 8 9 ffiee ~\\’ t; esl :.lrity RevieW...600 b. Teaches that sexual harassment reduces the cohesion and effectiveness of my Reserve...618 b. Teaches that the consumption of alcohol may increase the likelihood of sexual assault

  1. Differential Attendance in the Reserve Component: Causation and Recommendations for Improvement

    Science.gov (United States)

    2014-05-22

    Reserve, 1984), 17. 18Richard W. Stewart, American Military History, CMH Publication, 2nd ed., (Washington, DC: Center of Military History, 2009-2010...American Military History. CMH Pub, 2nd ed. Vol. 1. Washington, DC: Center of Military History, 2009-2010. Stultz, Jack. Memorandum Dated 17 January

  2. Impact of climate forcing uncertainty and human water use on global and continental water balance components

    Directory of Open Access Journals (Sweden)

    H. Müller Schmied

    2016-10-01

    Full Text Available The assessment of water balance components using global hydrological models is subject to climate forcing uncertainty as well as to an increasing intensity of human water use within the 20th century. The uncertainty of five state-of-the-art climate forcings and the resulting range of cell runoff that is simulated by the global hydrological model WaterGAP is presented. On the global land surface, about 62 % of precipitation evapotranspires, whereas 38 % discharges into oceans and inland sinks. During 1971–2000, evapotranspiration due to human water use amounted to almost 1 % of precipitation, while this anthropogenic water flow increased by a factor of approximately 5 between 1901 and 2010. Deviation of estimated global discharge from the ensemble mean due to climate forcing uncertainty is approximately 4 %. Precipitation uncertainty is the most important reason for the uncertainty of discharge and evapotranspiration, followed by shortwave downward radiation. At continental levels, deviations of water balance components due to uncertain climate forcing are higher, with the highest discharge deviations occurring for river discharge in Africa (−6 to 11 % from the ensemble mean. Uncertain climate forcings also affect the estimation of irrigation water use and thus the estimated human impact of river discharge. The uncertainty range of global irrigation water consumption amounts to approximately 50 % of the global sum of water consumption in the other water use sector.

  3. The Army National Guard: Part of the Operational Force and Strategic Reserve

    Science.gov (United States)

    2016-05-26

    22 The RC: Expensive to Use, Cheap to Maintain...avoiding the war. The limited use of the RC in the Vietnam 6 Patrick M. Cronin, The Total Force Policy in Historical Perspective, No. CRM -87-78. Center...The RC: Expensive to Use, Cheap to Maintain RC

  4. Predictions of Phase Separation in Three-Component Lipid Membranes by the MARTINI Force Field

    DEFF Research Database (Denmark)

    Davis, Ryan S.; Sunil Kumar, P. B.; Sperotto, Maria Maddalena

    2013-01-01

    is to understand which types of unsaturated PC induce the formation of thermodynamically stable coexisting phases when added to mixtures of DPPC and Chol and to unravel the mechanisms that drive phase separation in such three-component mixtures. Our simulations indicate that the currently used MARTINI force field...... the MARTINI force field, is primarily due to the interactions between the coarse-grained molecules, i.e., the beads, rather than due to the differences between the conformations of saturated and unsaturated lipid acyl chains, namely entropy driven....

  5. Reserve Component Attitude Study Wave IV. 1981 Tracking Study. Volume 1. Major Findings and Implications.

    Science.gov (United States)

    1982-05-01

    associated attitudinal and psychographic variables. The attitudinal differences among the segments suggest that marketing strategies targeted to specific...Section 4) C ~. Demographic segmentation of the PS samples allows for identifica- tion of specific market groups with high propensity for Guard/ Reserve...programs and target them to the market groups in which they are likely to have the greatest appeal. 0 PS Sample Segments Characteristics The PS sample

  6. Development and testing of an integrated smart tool holder for four-component cutting force measurement

    Science.gov (United States)

    Xie, Zhengyou; Lu, Yong; Li, Jianguang

    2017-09-01

    Cutting force measurement is a significant requirement for monitoring and controlling the machining processes. Hence, various methods of measuring the cutting force have been proposed by many researchers. In this study, an innovative integrated smart tool holder system based on capacitive sensors is designed, constructed and tested, which is capable of measuring triaxial cutting force and a torque simultaneously in a wireless environment system. A standard commercial tool holder is modified to make itself be the force sensing element that has advantages of simple structure and easy machining. Deformable beams are created in the tool holder, and the tiny deformations of which used to calculate the four-component cutting force are detected by six high precision capacitive sensors. All the sensors and other electronics, like data acquisition and transmitting unit, and wireless power unit, are incorporated into the tool holder as a whole system. The device is intended to be used in a rotating spindle such as in milling and drilling processes. Eventually, the static and dynamic characteristics of the smart tool holder have been determined by a series of tests. Cutting tests have also been carried out and the results show it is stable and practical to measure the cutting force in milling and drilling processes.

  7. The Reserve Force Policy Screening Models (POSM): A User’s Manual

    Science.gov (United States)

    1989-06-01

    to Youth Unemployment for DECISIONS MODULE Example ............................ 70 4. Dependent and Independent Variables Used in Calculations...enlisted part-timer force to meet a growth in strength of 2 percent per year for the next five years under two youth unemployment scenarios: (1...1. The independent variables will appear (see Fig. 21). Currently the table contains only youth unemployment (UNY) and a dummy for each fiscal year

  8. Insulin Biosynthetic Interaction Network Component, TMEM24, Facilitates Insulin Reserve Pool Release

    Directory of Open Access Journals (Sweden)

    Anita Pottekat

    2013-09-01

    Full Text Available Insulin homeostasis in pancreatic β cells is now recognized as a critical element in the progression of obesity and type II diabetes (T2D. Proteins that interact with insulin to direct its sequential synthesis, folding, trafficking, and packaging into reserve granules in order to manage release in response to elevated glucose remain largely unknown. Using a conformation-based approach combined with mass spectrometry, we have generated the insulin biosynthetic interaction network (insulin BIN, a proteomic roadmap in the β cell that describes the sequential interacting partners of insulin along the secretory axis. The insulin BIN revealed an abundant C2 domain-containing transmembrane protein 24 (TMEM24 that manages glucose-stimulated insulin secretion from a reserve pool of granules, a critical event impaired in patients with T2D. The identification of TMEM24 in the context of a comprehensive set of sequential insulin-binding partners provides a molecular description of the insulin secretory pathway in β cells.

  9. WHAT DOESNT GET MEASURED - DOESNT GET DONE: IMPLEMENTING CONTINUOUS PROCESS IMPROVEMENT IN THE AIR FORCE RESERVE

    Science.gov (United States)

    2016-04-01

    AF) is attempting a transformative effort to instill a Continuous Process Improvement (CPI) mindset into its culture. Known by its program name of...required. Given diverse operational requirements, the DoD Components shall have full flexibility to identify CPI/LSS focus areas and training plans...possible. Each of them must decide how CPI best fits into their individual leadership practices. Until such time as a CPI mindset is embedded into the

  10. The Joint Force Air Component Commander and the Integration of Offensive Cyberspace Effects: Power Projection through Cyberspace

    Science.gov (United States)

    2016-06-14

    86 | Air & Space Power Journal The Joint Force Air Component Commander and the Integration of Offensive Cyberspace Effects Power Projection through... Cyberspace Capt Jason M. Gargan, USAF Disclaimer: The views and opinions expressed or implied in the Journal are those of the authors and should not...and Space Power Journal requests a courtesy line. Cyberspace can provide great opportunities to assist the joint force air compo-nent commander (JFACC

  11. Squatting-Related Tibiofemoral Shear Reaction Forces and a Biomechanical Rationale for Femoral Component Loosening

    Directory of Open Access Journals (Sweden)

    Ashvin Thambyah

    2014-01-01

    Full Text Available Previous gait studies on squatting have described a rapid reversal in the direction of the tibiofemoral joint shear reaction force when going into a full weight-bearing deep knee flexion squat. The effects of such a shear reversal have not been considered with regard to the loading demand on knee implants in patients whose activities of daily living require frequent squatting. In this paper, the shear reversal effect is discussed and simulated in a finite element knee implant-bone model, to evaluate the possible biomechanical significance of this effect on femoral component loosening of high flexion implants as reported in the literature. The analysis shows that one of the effects of the shear reversal was a switch between large compressive and large tensile principal strains, from knee extension to flexion, respectively, in the region of the anterior flange of the femoral component. Together with the known material limits of cement and bone, this large mismatch in strains as a function of knee position provides new insight into how and why knee implants may fail in patients who perform frequent squatting.

  12. Herpes zoster, active component, U.S. Armed Forces, 2000-2016.

    Science.gov (United States)

    Williams, Valerie F; Stahlman, Shauna; Ying, Saixia

    2018-03-01

    During 2000-2016, a total of 52,895 active component service members received incident diagnoses of herpes zoster (HZ), for an overall unadjusted incidence rate of 2.5 cases per 1,000 person-years (p-yrs). Compared to their respective counterparts, overall incidence rates of HZ were highest among females, those aged 50 years or older, and Air Force members. Overall rates generally increased with increasing age and were highest among non-Hispanic whites and Asian/Pacific Islanders and lowest among non-Hispanic blacks. Unadjusted annual incidence rates of HZ increased steadily from 2000 to a peak in 2014. From 2000 through 2016, annual rates of HZ increased in each service and increases in annual rates were seen in all race/ethnicity groups. Individuals who were identified as immunocompromised constituted 2.1% of the total incident HZ cases. During 2000-2016, the cumulative numbers of incident cases of HZ were highest during June, July, and August. The increase in HZ incidence observed in this and many other studies is a public health concern that requires a better understanding of key risk factors. Additional research focused on these factors could make trends more interpretable, suggest new approaches for prevention and treatment of HZ, and allow for better targeting of existing strategies.

  13. Update: Exertional rhabdomyolysis, active component, U.S. Armed Forces, 2012-2016.

    Science.gov (United States)

    2017-03-01

    Among active component service members in 2016, there were 525 incident diagnoses of rhabdomyolysis likely due to physical exertion and/or heat stress ("exertional rhabdomyolysis"). The crude incidence rate in 2016 was 40.7 cases per 100,000 person-years. Annual rates of incident diagnoses of exertional rhabdomyolysis increased 46.2% between 2013 and 2016, with the greatest percentage change occurring between 2014 and 2015. In 2016, relative to their respective counterparts, the highest incidence rates of exertional rhabdomyolysis affected service members who were male; younger than 20 years of age; and black, non-Hispanic. During the surveillance period, annual incidence rates were highest among service members of the Marine Corps, intermediate among those in the Army, and lowest among those in the Air Force and Navy. Most cases of exertional rhabdomyolysis were diagnosed at installations that support basic combat/recruit training or major ground combat units of the Army or the Marine Corps. Medical care providers should consider exertional rhabdomyolysis in the differential diagnosis when service members (particularly recruits) present with muscular pain or swelling, limited range of motion, or the excretion of dark urine (possibly due to myoglobinuria) after strenuous physical activity, particularly in hot, humid weather.

  14. Nongravitational motions of comets: component of the recoil force normal to orbital plane

    Science.gov (United States)

    Sekanina, Z.

    1993-09-01

    The significance and detectability of a normal component of the nongravitational acceleration that perturbs the motions of periodic comets are examined by comparing the total perturbation effect, calculated from the component's empirical term in the equations of motion integrated over the orbital period, with the cumulative perturbations of the longitude of the ascending node and the orbital inclination brought about by the momentum that is transferred to the nucleus due to water outgassing from discrete active regions. It is shown that the approximation of temporal variations in the recoil acceleration computed using the well-known g(r) law, which is symmetrical with respect to perihelion, implies that the cumulative nongravitational perturbations of the two orbital elements are accounted for in a fashion that is inconsistent with the perturbation theory. The net result is that, in general, the value of the Style II nongravitational parameter that is consistent with the cumulative effect on the inclination, iA3, differs from the parameter's expected value that describes the cumulative effect on the nodal line, ΩA3. The parameter's distributions as functions of the spin vector and the direction of the ejecta's vector (described by the thrust angle) are represented graphically for several heliocentric orbits. Symmetries with respect to particular values of the argument of perihelion, the rotation constants, and the thrust angle that apply in the case of a baseline model (which involves assumptions of a single source and the absence of sublimation lags) are identified. The magnitudes of the parameter A3 derived from orbit- determination runs are found to be generally compatible with the presented interpretation in that they are not excessive, thus supporting the evidence presented in an earlier paper (Sekanina 1993) and based upon information on the transverse and radial components of the recoil force. The values of iA3 and ΩA3 are shown to coincide for certain

  15. Evaluation of the Cutting Force Components and the Surface Roughness in the Milling Process of Micro- and Nanocrystalline Titanium

    Directory of Open Access Journals (Sweden)

    Habrat W.

    2016-09-01

    Full Text Available Nanocristalline pure titanium in comparison to microcrystalline titanium is characterized by better mechanical properties which influence its wider usability. The aim of the research was to evaluate whether the grain size of pure titanium (micro- and nanocrystalline has influence on the cutting force components and the surface roughness in the milling process. Models of cutting force components for both materials were prepared and differences between the results were examined. The feed rate effect on selected parameters of surface roughness after milling of micro- and nanocrystalline pure titanium was determined.

  16. Evaluation of the effects of exposure to organic solvents and hazardous noise among US Air Force Reserve personnel

    Directory of Open Access Journals (Sweden)

    Hayley Hughes

    2013-01-01

    Full Text Available Hearing loss affects many workers including those in the military and may be caused by noise, medications, and chemicals. Exposures to some chemicals may lead to an increase in the incidence of hearing loss when combined with hazardous noise. This retrospective study evaluated the risk for hearing loss among Air Force Reserve personnel exposed to occupational noise with and without exposures to toluene, styrene, xylene, benzene, and JP-8 (jet fuel. Risk factors associated with hearing loss were determined using logistic and linear regression. Stratified analysis was used to evaluate potential interaction between solvent and noise exposure. The majority of the subjects were male (94.6% and 35 years or older on the date of their first study audiogram (66%. Followed for an average of 3.2 years, 9.2% of the study subjects had hearing loss in at least one ear. Increasing age (odds ratio [OR] = 1.03 per year of age and each year of follow-up time (OR = 1.23 were significantly associated with hearing loss. Low and moderate solvent exposures were not associated with hearing loss. Linear regression demonstrated that hearing loss was significantly associated with age at first study audiogram, length of follow-up time, and exposure to noise. Hearing decreased by 0.04 decibels for every decibel increase in noise level or by almost half a decibel (0.4 dB for every 10 decibel increase in noise level.

  17. Force

    CERN Document Server

    Graybill, George

    2007-01-01

    Forces are at work all around us. Discover what a force is, and different kinds of forces that work on contact and at a distance. We use simple language and vocabulary to make this invisible world easy for students to ""see"" and understand. Examine how forces ""add up"" to create the total force on an object, and reinforce concepts and extend learning with sample problems.

  18. The Relationships among Isometric, Isotonic, and Isokinetic Concentric and Eccentric Quadriceps and Hamstring Force and Three Components of Athletic Performance.

    Science.gov (United States)

    Anderson, M A; Gieck, J H; Perrin, D H; Weltman, A; Rutt, R A; Denegar, C R

    1991-01-01

    This study was supported in part by a grant from the Foundation for Physical Therapy, Inc. The purpose of this study was to compare the relationships among isometric, isotonic, and isokinetic concentric and eccentric quadriceps and hamstring forces and three components of athletic performance in college-aged, male athletes. Bilateral quadriceps and hamstring muscle torque were obtained (N = 39) using a KinCom(R) for concentric (rate at 60 degrees /sec and 180 degrees /sec), eccentric (rate at 30 degrees /sec and 90 degrees /sec), isotonic, and isometric (knee angles at 30 degrees and 60 degrees ) contractions. Athletic performance was assessed using vertical jump performance, 40-yard dash time, and agility run time. The best predictor of 40-yard dash time was the right peak isokinetic concentric hamstring force at 60 degrees /sec (R = .57; p < 0.05). The best predictor of agility run time was the left mean isokinetic eccentric hamstring force at 90 degrees /sec (R = .58; p < 0.05). There were no significant correlations between any quadriceps or hamstring force and vertical jump. It was concluded that isokinetic eccentric quadriceps and hamstring forces were no better predictors of athletic performance than muscle forces assessed in other ways. However, they may be more predictive of some specific components of performance. J Orthop Sports Phys Ther 1991;14(3):114-120.

  19. Sources of variability of estimates of malaria case counts, active and reserve components, U.S. Armed Forces.

    Science.gov (United States)

    2012-01-01

    Each January, the Medical Surveillance Monthly Report (MSMR) estimates numbers of malaria infections among U.S. service members using a surveillance case definition to identify "malaria cases". These cases include individuals with a hospital discharge diagnosis of malaria and those who were reported with malaria through military notifiable event reporting systems. This report compares the MSMR surveillance case definition with other proposed case definitions to demonstrate the degree to which estimates of numbers of malaria cases are dependent upon clinical settings, data sources and case-defining rules used to produce such estimates. For example, including outpatient diagnoses as malaria cases would more than double the 2010 case count. As compared with cases defined using other proposed case definitions, many more MSMR-defined cases had records of a specific Plasmodium species, a laboratory test for malaria and recent travel to a malaria-endemic country. Interpretations of the results of MSMR reports should consider how "cases" are defined.

  20. Deployment, PTSD Symptoms, and Co-morbid Mental Health Conditions in the Active Force and Reserve Components

    Science.gov (United States)

    2010-10-01

    model from Simms et al. (2002). Both 4-factor models were superior to models comprised of fewer factors, including the original 3-factor DSM-IV concep ...obtain civilian care that will be covered by insurance than for AD personnel to seek similar care. It may be cost prohibitive for AD persons to go...do not typically live in a day-to-day culture in which the anxieties associated with deployment are a way of life . Rather, their typical culture

  1. Deaths by Suicide While on Active Duty, Active and Reserve Components, U.S. Armed Forces, 1998-2011

    Science.gov (United States)

    2012-06-01

    suicide method among males of all age groups and females 20 and older; among teenaged females, hanging/suff ocation was the most frequently used...June 2012 Vol. 19 No. 6 M S M R Page 7 have suggested that deployment to these confl icts increases a soldier’s risk of suicide and have...estimated a proportion of suicides that may be related to deployment.6,10 Such relationships are plausible but diffi cult to characterize precisely

  2. Retention Forces between Titanium and Zirconia Components of Two-Part Implant Abutments with Different Techniques of Surface Modification.

    Science.gov (United States)

    von Maltzahn, Nadine Freifrau; Holstermann, Jan; Kohorst, Philipp

    2016-08-01

    The adhesive connection between titanium base and zirconia coping of two-part abutments may be responsible for the failure rate. A high mechanical stability between both components is essential for the long-term success. The aim of the present in-vitro study was to evaluate the influence of different surface modification techniques and resin-based luting agents on the retention forces between titanium and zirconia components in two-part implant abutments. A total of 120 abutments with a titanium base bonded to a zirconia coping were investigated. Two different resin-based luting agents (Panavia F 2.0 and RelyX Unicem) and six different surface modifications were used to fix these components, resulting in 12 test groups (n = 10). The surface of the test specimens was mechanically pretreated with aluminium oxide blasting in combination with application of two surface activating primers (Alloy Primer, Clearfil Ceramic Primer) or a tribological conditioning (Rocatec), respectively. All specimens underwent 10,000 thermal cycles between 5°C and 55°C in a moist environment. A pull-off test was then conducted to determine retention forces between the titanium and zirconia components, and statistical analysis was performed (two-way anova). Finally, fracture surfaces were analyzed by light and scanning electron microscopy. No significant differences were found between Panavia F 2.0 and RelyX Unicem. However, the retention forces were significantly influenced by the surface modification technique used (p zirconia copings were pretreated with aluminium oxide blasting, and with the application of Clearfil Ceramic Primer. Surface modification techniques crucially influence the retention forces between titanium and zirconia components in two-part implant abutments. All adhesion surfaces should be pretreated by sandblasting. Moreover, a phosphate-based primer serves to enhance long-term retention of the components. © 2015 Wiley Periodicals, Inc.

  3. Principal component analysis in ground reaction forces and center of pressure gait waveforms of people with transfemoral amputation.

    Science.gov (United States)

    Soares, Denise Paschoal; de Castro, Marcelo Peduzzi; Mendes, Emilia Assunção; Machado, Leandro

    2016-12-01

    The alterations in gait pattern of people with transfemoral amputation leave them more susceptible to musculoskeletal injury. Principal component analysis is a method that reduces the amount of gait data and allows analyzing the entire waveform. To use the principal component analysis to compare the ground reaction force and center of pressure displacement waveforms obtained during gait between able-bodied subjects and both limbs of individuals with transfemoral amputation. This is a transversal study with a convenience sample. We used a force plate and pressure plate to record the anterior-posterior, medial-lateral and vertical ground reaction force, and anterior-posterior and medial-lateral center of pressure positions of 12 participants with transfemoral amputation and 20 able-bodied subjects during gait. The principal component analysis was performed to compare the gait waveforms between the participants with transfemoral amputation and the able-bodied individuals. The principal component analysis model explained between 74% and 93% of the data variance. In all ground reaction force and center of pressure waveforms relevant portions were identified; and always at least one principal component presented scores statistically different (p analysis was able to discriminate many portions of the stance phase between both lower limbs of people with transfemoral amputation compared to the able-bodied participants. Principal component analysis reduced the amount of data, allowed analyzing the whole waveform, and identified specific sub-phases of gait that were different between the groups. Therefore, this approach seems to be a powerful tool to be used in gait evaluation and following the rehabilitation status of people with transfemoral amputation. © The International Society for Prosthetics and Orthotics 2015.

  4. Centralized Command and Control of Theater Missile Defense: The Joint Force Missile Defense Component Coordinator

    National Research Council Canada - National Science Library

    Bucey, William H

    2006-01-01

    .... The numerous commands, decentralized command and control, and limited and expensive resources involved in TMD require changes to the joint doctrine in order to provide unity of command and economy of force...

  5. Report to Congress on the feasibility of establishing a heating oil component to the Strategic Petroleum Reserve. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-06-01

    In the Autumn of 1996, consumers and Members of Congress from the Northeast expressed concern about high prices for heating oil and historically low levels of inventories. Some Members of Congress advocated building a Federal inventory of heating oil as part of the Strategic Petroleum Reserve (SPR). Regional reserves are authorized as part of the SPR for import dependent regions by the Energy Policy and Conservation Act. In response, the Department of Energy (DOE) proposed a series of studies related to heating fuels, including a study of the desirability, feasibility, and cost of creating a Federal reserve containing distillate fuel. This report documents that study.

  6. Marine Corps Reserve Officer Manpower Modifications During the Long War: A Case to Achieve Parity with the Active Component

    National Research Council Canada - National Science Library

    Schaffer, Douglas

    2008-01-01

    .... To be more effective as commanders and leaders, reserve officers need to achieve parity with active duty officers in rank and command selection through education, leadership experiences, and training opportunities...

  7. Report to Congress on the feasibility of establishing a heating oil component to the Strategic Petroleum Reserve. Volume 2: Appendices

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-06-01

    Nine appendices to the main report are included in this volume. They are: Northeastern US distillate supply systems; New England fuel oil storage capacities and inventories; Characteristics of the northeast natural gas market; Documentation of statistical models and calculation of benefits; Regional product reserve study; Other countries` experience with refined product storage; Global refining supply demand appraisal; Summary of federal authorities relevant to the establishment of petroleum product reserves; Product stability and turnover requirements.

  8. Minimal-Sensing, Passive Force Identification Techniques for a Composite Structural Missile Component

    Directory of Open Access Journals (Sweden)

    Nick Stites

    2009-01-01

    Full Text Available Structural health monitoring systems are often limited to the use of one sensor due to cost, complexity, and weight restrictions. Therefore, there is a need to develop load and damage identification techniques that utilize only one sensor. Two passive force estimation techniques are investigated in this work. The techniques focus on either the shape or the amplitude of the magnitude of the applied force in the frequency domain. Both techniques iteratively reduce an underdetermined set of equations of motion into many overdetermined systems of equations to solve for the force estimates. The techniques are shown to locate and quantify impulsive impacts with over 97% accuracy and non-impulsive impacts with at least 87% accuracy. A filament-wound rocket motor casing is used as a test structure. Impacts not acting at a specific input degree of freedom are also accurately located depending on the distance away from the modeled input degrees of freedom, and damaging impact forces are quantified by making assumptions about the impulsive nature of the applied force.

  9. A Study of Issues Related to Recruitment of Enlisted Personnel for the Reserve Components. Volume 2. Data Tables. Wave II.

    Science.gov (United States)

    1980-07-01

    also express more distrst of the military and of military officers. * l e Veterans are lees likely to agree with itesm expessing approval of the S Gard...FORCE ARMY MARINE CRPS NAVY BA5M 451 444 202 440 Percent saying that National Guard /Reser-es would be rouch or sorieIEat mo~re Jli]ke.v to ofer...reliability Ikely. ,ver, great selectivity Womld be required. The wre specific the information needed, tbe lees likely it is to be reliable. RELATIVE

  10. A Study of Issues Related to Accession and Retention of Enlisted Personnel in the Reserve Components. Volume 1.

    Science.gov (United States)

    1977-11-01

    lower 9 or lowr 28 or lowr 24 or lower High enployrrert index 8 or higher 10 or higher 29 or higher 25 or higher Socio-Econatic Irsdex:2) Low, socia ...learn about the Guard/Reserve or of the efforts initiated by others (for example, friends, media , etc.). Their direct experiences will largely be limited

  11. ANALYSIS of Control Force Grasping for a Multifunctional Five Fingered Robot to Pick-up Various of Components

    Directory of Open Access Journals (Sweden)

    Widhiada W.

    2016-01-01

    Full Text Available Multi-fingered robot gripper has become popular in the major research topics as grasping an object in robotic systems. The author considers a matter of style-based control model for a multi-fingered robot hand grasping an object with a known geometric characteristics. This paper introduces design process and analysis of contact force the five fingered gripper suitable to handle several of objects. The author applied Simulink/SimMechanics, Support package Arduino and Inventor software packages to facilatate and integrated the design of contact force gripper systems. The advance of PID control is used to control dynamics motions of the five fingered gripper systems. The multifunction finger’s gripper is developed to handle the various components. Contact force between fingertips and object surface is computed using the Hooke law concept. The analysis of experiment result shows the optimum of contact forces are achieved to hold the object. The spring and damper algorithm is used to compute the interaction of force between fingertips and object surface.

  12. A framework for the co-registration of hemodynamic forces and atherosclerotic plaque components

    OpenAIRE

    Canton, Gador; Chiu, Bernard; Chen, Huijun; Chen, Yimin; Hatsukami, Thomas S.; Kerwin, William S.; Yuan, Chun

    2013-01-01

    Local hemodynamic forces, such as wall shear stress, are thought to trigger cellular and molecular mechanisms that determine atherosclerotic plaque vulnerability to rupture. Magnetic resonance imaging (MRI) has emerged as a powerful tool to characterize human carotid atherosclerotic plaque composition and morphology, and to identify plaque features shown to be key determinants of plaque vulnerability. Image-based computational fluid dynamics (CFD) has allowed researchers to obtain time-resolv...

  13. The Role of the US Army Reserve in Support of the US Army Force 2025 and Beyond: Challenges and Opportunities

    Science.gov (United States)

    2015-06-12

    2020 will have to be globally responsive and capable, leaner and with improved resilient networks. It will focus on optimized human performance and...set the conditions for 2025 and beyond. The proposed 2025 force will be leaner , more lethal, expeditionary and agile. It will maintain overmatch...investment. In the F2025B construct , they are expected to remain as such, because the decisive edge will be achieved on their contributions. The Chief

  14. Structure: Suitable Staffing and Training of Functional Specialists within the United States Army Reserve Civil Affairs Force

    Science.gov (United States)

    2011-12-01

    15Stuart E. Johnson , John E. Peters, Karin E. Kitchens, and Aaron Martin, A Review of the Army’s Modular Force Structure (Arlington, VA...coordinate effectively with the military. When President Johnson disbanded the OCO, the US Military Assistance Command, Vietnam (MACV) Commander...H., Kenneth Finlayson, Robert W. Jones, Jr., Cherilyn A. Walley, A. Dwayne Aaron, Michael R. Mullins, and James A. Schroder. All Roads Lead To

  15. Eliminate the Army and Air Force Reserves: Building a Robust National Guard to Meet 21st Century Operational Challenges

    Science.gov (United States)

    2016-04-04

    American Way of War: US Military Practice from the Revolution to Afghanistan (Washington, DC: Georgetown University Press, 2014), 67. 6 Doubler, 12-13...www.constitution.org/mil/mil_act_1792.htm (accessed October 12, 2015). 8 cross over into Canada.11 During the Mexican -American War several...governors expressed a reluctance to allow state forces to enter Mexican territory.12 Further, interpretation of the Uniform Militia Act did not grant

  16. Feasibility Study on CNC Multioperation Grinding of Jet Engine Components Using Force Sensing Adaptive Control.

    Science.gov (United States)

    1982-09-30

    A1A21 725 FEASIBIIT STUDY ON CNC MULTOPERATION GRIDN N O r ~ j/ R2 S HAHN 30 SEP 82 AF OSR RT 82-0992 F49620-82EN N OM N S U ANA O C A0 OR 9CUG M...TYPE OF REPORT A PERIOD COVERED4. ~~FEASIBILITY STUDY ON CNC FnlRpr o MULTIOPERATION GRINDING OF JET ENGINE 1inAPR82 r fo0rET.8 COMPONENTS USING FORSE...identify by block number) CNC GRINDING MULTIOPERATION GRINDING ADAPTIVE CONTROL GRINDING GRINDING JET ENGINE COMPONENTS CREEP FEED GRINDING COMPUTER-AIDED

  17. Issues Related to Recruitment of Enlisted Personnel for the Reserve Components. Major Findings and Recommendations, 1979 Tracking Study. Volume I.

    Science.gov (United States)

    1980-09-01

    8217Reserve Se rv i ce r’qu i r os tearlwork, and gregariou people are more, at tra cte -d to it th is fare. O tilel - tendency toward gregariousnes-, Was...Fishing l( ) 2( ) 3( ) 4( ) 9( f. Gardening l() 2( )3( )4( ) 9( g. Watching a football garre l( ) 2( ) 3( ) 4( ) 9( h. Reading about medicine 1( ) 2( ) 3...Fishing 1( ) 2( ) 3k ) 4( ) R( f. Gardening 1( ) 2() 3( ) 4( ) 9( )-41 g. Watching a football gam 1( 2( 3( ) 4( ) 9( )-L2 h. Reading about medicine 1’) 2

  18. The genetic component of the forced diving bradycardia response in mammals

    Directory of Open Access Journals (Sweden)

    Andreas eFahlman

    2011-09-01

    Full Text Available We contrasted the forced diving bradycardia between two genetically similar (inbred rat strains (Fischer and Buffalo, compared to that of outbred rats (Wistar. The animals were habituated to forced diving for 4 weeks. Each animal was then tested during one 40-sec dive on each of 3 days. The heart rate (fH was measured before, during, and after each dive. Fischer and Buffalo exhibited marked difference in dive bradycardia (Fischer: 120.9 ± 14.0 beats • min-1 vs. Buffalo: 92.8 ± 12.8 beats • min-1, P < 0.05. Outbred rats showed an intermediate response (103.0 ± 30.9 beats • min-1 but their between-animal variability in mean dive fH and pre-diving resting fH were higher than the inbred strains (P < 0.05, which showed no difference (P > 0.05. The decreased variability in fH in inbred rats as compared with the outbred group indicates that reduced genetic variability minimizes variability of the diving bradycardia between individuals. Heritability within strains was assessed by the repeatability (R index and was 0.93 ± 0.05 for the outbred, 0.84 ± 0.16 for Buffalo, and 0.80 ± 0.12 for Fischer rats for fH during diving. Our results suggest that a portion of the mammalian diving bradycardia may be a heritable trait.

  19. Component Analysis of Unsteady Hydrodynamic Force of Closed-Type Centrifugal Pump with Single Blades of Different Blade Outlet Angles

    Directory of Open Access Journals (Sweden)

    Yasuyuki Nishi

    2015-01-01

    Full Text Available Single-blade centrifugal impellers for sewage systems undergo both unsteady radial and axial thrusts. Therefore, it is extremely important for the improvement of pump reliability to quantitatively grasp these fluctuating hydrodynamic forces and determine the generation mechanism behind them. In this study, we conducted component analyses of radial and axial thrusts of closed, single-blade centrifugal pumps with different blade outlet angles by numerical analysis while considering leakage flow. The results revealed the effect of the blade outlet angle on the components of radial and axial thrusts. For increased flow rates, the time-averaged values of the pressure component were similar for all impellers, although its fluctuating components were higher for impellers with larger blade outlet angles. Moreover, the fluctuating inertia component of the impeller with a blade outlet angle of 8° decreased as the flow rate increased, whereas those with 16° and 24° angles increased. Therefore, the radial thrust on the hydraulic part was significantly higher for impellers with high blade outlet angles.

  20. Stationing a U.S. Army Reserve Black Hawk Helicopter Company at Joint Forces Training Base Los Alamitos, California

    Science.gov (United States)

    2011-03-01

    sacred sites as defined by EO 13007, to which access is provided under the American Indian Religious Freedom Act (AIRFA), significant paleontological...National Guard 2005-2009, there are no archaeological or sacred sites located on JFTB Los Alamitos (CAARNG, 2004). Neither Building 912 nor ECS 16 are...cracks to the canopy , and other damage to aircraft components. Damaging strikes have the potential to result in loss of life to aircrew, cost millions of

  1. Disc-shaped LIM for levitation and traction force control powered by the source using the component synchronous with the motor speed

    Directory of Open Access Journals (Sweden)

    Morizane Toshimitsu

    2015-12-01

    Full Text Available It has been proposed that a novel maglev transport system uses both of the attractive force and thrust force of the Linear Induction Motor (LIM. In our proposal, these two forces will be controlled by two different frequency components. One of the frequency components is synchronous with the motor speed (fm. Another frequency component is drive frequency (fd. Our proposed system enables the independent and simultaneous control of the attractive and thrust force of LIM. Each value of the attractive and the thrust force generated by fm and fd must be identified in order to design that LIM control system. For these purpose, a disc-shaped LIM has been developed as an experimental equipment. The force profiles, especially around zero slip, have been analyzed under experimental conditions.

  2. Design and Analysis of a Micromechanical Three-Component Force Sensor for Characterizing and Quantifying Surface Roughness

    Directory of Open Access Journals (Sweden)

    Liang Q.

    2015-10-01

    Full Text Available Roughness, which can represent the trade-off between manufacturing cost and performance of mechanical components, is a critical predictor of cracks, corrosion and fatigue damage. In order to measure polished or super-finished surfaces, a novel touch probe based on three-component force sensor for characterizing and quantifying surface roughness is proposed by using silicon micromachining technology. The sensor design is based on a cross-beam structure, which ensures that the system possesses high sensitivity and low coupling. The results show that the proposed sensor possesses high sensitivity, low coupling error, and temperature compensation function. The proposed system can be used to investigate micromechanical structures with nanometer accuracy.

  3. Injuries associated with combat sports, active component, U.S. Armed Forces, 2010-2013.

    Science.gov (United States)

    2014-05-01

    The practice of combat sports creates a potential for training- and sports-related injuries among military members. During the 4-year surveillance period, there were 12,108 cases of injuries associated with combat sports among active component service members; the overall incidence rate was 21.0 per 10,000 person-years (p-yrs). The rates were higher among service members who were male, Hispanic, in the youngest age groups, in the Army, junior enlisted, and in combat-specific occupations. The rate among recruit/ trainees (779.4 per 10,000 p-yrs) was more than 165 times the rate among all other active component service members (non-recruits) (4.7 per 10,000 p-yrs). Sprains, strains, and contusions accounted for more than one-half of the primary (first-listed) diagnoses associated with combat sports cases. More serious conditions such as concussions/head injuries and skull/face fractures/intracranial injuries were reported among 3.9% and 2.1% of all cases and were more common among boxing-related cases. Hand/wrist fractures were also common among boxing cases. Wrestling had comparatively greater proportions of dislocations and open wounds. Although the combat sport training provides many physical and mental benefits to the individual, safety practices should be enforced to reduce the most frequent and serious injuries.

  4. Update: Exertional rhabdomyolysis, active component, U.S. Army, Navy, Air Force, and Marine Corps, 2011-2015.

    Science.gov (United States)

    Armed Forces Health Surveillance Branch

    2016-03-01

    Among active component members of the U.S. Army, Navy, Air Force, and Marine Corps in 2015, there were 456 incident episodes of rhabdomyolysis likely due to physical exertion or heat stress ("exertional rhabdomyolysis"). Annual rates of incident diagnoses of exertional rhabdomyolysis increased 17% between 2014 and 2015. In 2015, the highest incidence rates occurred in service members who were male; younger than 20 years of age; black, non-Hispanic; members of the Marine Corps and Army; recruit trainees; and in combat-specific occupations. Most cases of exertional rhabdomyolysis were diagnosed at installations that support basic combat/recruit training or major ground combat units of the Army or Marine Corps. Medical care providers should consider exertional rhabdomyolysis in the differential diagnosis when service members (particularly recruits) present with muscular pain and swelling, limited range of motion, or the excretion of dark urine (e.g., myoglobinuria) after strenuous physical activity, particularly in hot, humid weather.

  5. An investigation of force components in orthogonal cutting of medical grade cobalt-chromium alloy (ASTM F1537).

    Science.gov (United States)

    Baron, Szymon; Ahearne, Eamonn

    2017-04-01

    An ageing population, increased physical activity and obesity are identified as lifestyle changes that are contributing to the ongoing growth in the use of in-vivo prosthetics for total hip and knee arthroplasty. Cobalt-chromium-molybdenum (Co-Cr-Mo) alloys, due to their mechanical properties and excellent biocompatibility, qualify as a class of materials that meet the stringent functional requirements of these devices. To cost effectively assure the required dimensional and geometric tolerances, manufacturers rely on high-precision machining. However, a comprehensive literature review has shown that there has been limited research into the fundamental mechanisms in mechanical cutting of these alloys. This article reports on the determination of the basic cutting-force coefficients in orthogonal cutting of medical grade Co-Cr-Mo alloy ASTM F1537 over an extended range of cutting speeds ([Formula: see text]) and levels of undeformed chip thickness ([Formula: see text]). A detailed characterisation of the segmented chip morphology over this range is also reported, allowing for an estimation of the shear plane angle and, overall, providing a basis for macro-mechanic modelling of more complex cutting processes. The results are compared with a baseline medical grade titanium alloy, Ti-6Al-4V ASTM F136, and it is shown that the tangential and thrust-force components generated were, respectively, ≈35% and ≈84% higher, depending primarily on undeformed chip thickness but with some influence of the cutting speed.

  6. Oak Ridge Reservation volume I. Y-12 mercury task force files: A guide to record series of the Department of Energy and its contractors

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-17

    The purpose of this guide is to describe each of the series of records identified in the documents of the Y-12 Mercury Task Force Files that pertain to the use of mercury in the separation and enrichment of lithium isotopes at the Department of Energy`s (DOE) Y-12 Plant in Oak Ridge, Tennessee. History Associates Incorporated (HAI) prepared this guide as part of DOE`s Epidemiologic Records Inventory Project, which seeks to verify and conduct inventories of epidemiologic and health-related records at various DOE and DOE contractor sites. This introduction briefly describes the Epidemiologic Records Inventory Project and HAI`s role in the project. Specific attention will be given to the history of the DOE-Oak Ridge Reservation, the development of the Y-12 Plant, and the use of mercury in the production of nuclear weapons during the 1950s and early 1960s. This introduction provides background information on the Y-12 Mercury Task Force Files, an assembly of documents resulting from the 1983 investigation of the Mercury Task Force into the effects of mercury toxicity upon workplace hygiene and worker health, the unaccountable loss of mercury, and the impact of those losses upon the environment. This introduction also explains the methodology used in the selection and inventory of these record series. Other topics include the methodology used to produce this guide, the arrangement of the detailed record series descriptions, and information concerning access to the collection.

  7. Skewness of the generalized centrifugal force divergence for a joint normal distribution of strain and vorticity components

    Science.gov (United States)

    Hua, Bach Lien

    1994-09-01

    This note attempts to connect the skewness of the probability distribution function (PDF) of pressure, which is commonly observed in two-dimensional turbulence, to differences in the geometry of the strain and vorticity fields. This paper illustrates analytically the respective roles of strain and vorticity in shaping the PDF of pressure, in the particular case of a joint normal distribution of velocity gradients. The latter assumption is not valid in general in direct numerical simulations (DNS) of two-dimensional turbulence but may apply to geostrophic turbulence in presence of a differential rotation (β effect). In essence, minus the Laplacian of pressure is the difference of squared strain and vorticity, a quantity which is named the generalized centrifugal force divergence (GCFD). Square strain and vorticity distributions follow chi-square statistics with unequal numbers of degrees of freedom, when one assumes a joint normal distribution of their components. Squared strain has two degrees of freedom and squared vorticity only one, thereby causing a skewness of the PDF of GCFD and hence of pressure.

  8. Increases in tibial force imbalance but not changes in tibiofemoral laxities are caused by varus-valgus malalignment of the femoral component in kinematically aligned TKA.

    Science.gov (United States)

    Riley, Jeremy; Roth, Joshua D; Howell, Stephen M; Hull, Maury L

    2018-01-29

    The purposes of this study were to quantify the increase in tibial force imbalance (i.e. magnitude of difference between medial and lateral tibial forces) and changes in laxities caused by 2° and 4° of varus-valgus (V-V) malalignment of the femoral component in kinematically aligned total knee arthroplasty (TKA) and use the results to detemine sensitivities to errors in making the distal femoral resections. Because V-V malalignment would introduce the greatest changes in the alignment of the articular surfaces at 0° flexion, the hypotheses were that the greatest increases in tibial force imbalance would occur at 0° flexion, that primarily V-V laxity would significantly change at this flexion angle, and that the tibial force imbalance would increase and laxities would change in proportion to the degree of V-V malalignment. Kinematically aligned TKA was performed on ten human cadaveric knee specimens using disposable manual instruments without soft tissue release. One 3D-printed reference femoral component, with unmodified geometry, was aligned to restore the native distal and posterior femoral joint lines. Four 3D-printed femoral components, with modified geometry, introduced V-V malalignments of 2° and 4° from the reference component. Medial and lateral tibial forces were measured during passive knee flexion-extension between 0° to 120° using a custom tibial force sensor. Eight laxities were measured from 0° to 120° flexion using a six degree-of-freedom load application system. With the tibial component kinematically aligned, the increase in the tibial force imbalance from that of the reference component at 0° of flexion was sensitive to the degree of V-V malalignment of the femoral component. Sensitivities were 54 N/deg (medial tibial force increasing > lateral tibial force) (p  medial tibial force) (p varus and valgus malalignments, respectively. Varus-valgus malalignment did not significantly change varus, internal-external rotation

  9. The categorisation of swimming start performance with reference to force generation on the main block and footrest components of the Omega OSB11 start blocks.

    Science.gov (United States)

    Slawson, Sian E; Conway, Paul P; Cossor, Jodi; Chakravorti, Nandini; West, Andrew A

    2013-01-01

    Work presented in this paper provides a methodology for categorising swimming start performance based on peak force production on the main block and footrest components of the Omega OSB11 starting block. A total of 46 elite British swimmers were tested, producing over 1000 start trials. Overwater cameras were synchronised to a specifically designed start block that allowed the measurement of force production via two sets of four, tri-axis, force transducers; one set in the main block and one in the footrest. Data were then analysed, segregating trials for gender. Each start was categorised, with respect to the peak force production in horizontal and vertical components, into one of nine categories. Three performance indicators, i.e. block time, take-off velocity and distance of entry, were used to assess whether differences in performance could be correlated with these categories. Results from these data suggest that swimmers generating higher than average peak forces were more likely to produce a better overall start performance than those who produced forces lower than the average, for this population of athletes.

  10. What is the Role of the Joint Forces Air Component Commander as Airspace Control Authority during Stability Operations

    Science.gov (United States)

    2007-06-01

    Gerard E. Hasselwander, Robert F. Jakob, and Charles A. Ravenstein , Aces and Aerial Victories: The United States Air Force in Southeast Asia, 1965...Frank Futrell, William H. Greenhalgh, Carl Grubb, Gerard E. Hasselwander, Robert F. Jakob, and Charles A. Ravenstein , Aces and Aerial Victories: The...Jakob, and Charles A. Ravenstein , Aces and Aerial Victories: The United States Air Force in Southeast Asia, 1965-1973, 14. 61Robert Frank Futrell

  11. Combined gradient projection/single component artificial force induced reaction (GP/SC-AFIR) method for an efficient search of minimum energy conical intersection (MECI) geometries

    Science.gov (United States)

    Harabuchi, Yu; Taketsugu, Tetsuya; Maeda, Satoshi

    2017-04-01

    We report a new approach to search for structures of minimum energy conical intersection (MECIs) automatically. Gradient projection (GP) method and single component artificial force induced reaction (SC-AFIR) method were combined in the present approach. As case studies, MECIs of benzene and naphthalene between their ground and first excited singlet electronic states (S0/S1-MECIs) were explored. All S0/S1-MECIs reported previously were obtained automatically. Furthermore, the number of force calculations was reduced compared to the one required in the previous search. Improved convergence in a step in which various geometrical displacements are induced by SC-AFIR would contribute to the cost reduction.

  12. Thermal response of core and central-cavity components of a high-temperature gas-cooled reactor in the absence of forced convection coolant flow. [NATCON code

    Energy Technology Data Exchange (ETDEWEB)

    Whaley, R.L.; Sanders, J.P.

    1976-09-01

    A means of determining the thermal responses of the core and the components of a high-temperature gas-cooled reactor after loss of forced coolant flow is discussed. A computer program, using a finite-difference technique, is presented together with a solution of the confined natural convection. The results obtained are reasonable and demonstrate that the computer program adequately represents the confined natural convection.

  13. Issues Related to Recruitment of Enlisted Personnel for the Reserve Components. Volume 4. Focus Group Report 1980 Tracking Study. Wave III.

    Science.gov (United States)

    1981-06-01

    view the services as a place for the uneducated , unskilled, and unemployed. In addition, the Guard/Reserve is seen as a place where little of value is...individuals who are less qualified. Emphasizing the positive aspects of Guard/ Reserve personnel may reduce the negative stereotypes which are currently...me whether you woAuld describe yourself as: 67- 1( ) Hispanic , ( ) Other 2( ) American Indian or Alaskan Native, WRITE IN 3( ) Black, not of Hispanic

  14. Forcing the issue’ - Aromatic tuning facilitates stimulus-independent modulation of a two-component signaling circuit

    DEFF Research Database (Denmark)

    Nørholm, Morten; von Heijne, Gunnar; Draheim, Roger R.

    2014-01-01

    Two-component signaling circuits allow bacteria to detect and respond to external stimuli. Unfortunately, the input stimulus remains unidentified for the majority of these circuits. Therefore, development of a synthetic method for stimulus-independent modulation of these circuits is highly desira...

  15. Breakdown of NAO reproducibility into internal versus externally-forced components: a two-tier pilot study

    Science.gov (United States)

    Douville, Hervé; Ribes, A.; Tyteca, S.

    2018-03-01

    Assessing the ability of atmospheric models to capture observed climate variations when driven by observed sea surface temperature (SST), sea ice concentration (SIC) and radiative forcings is a prerequisite for the feasibility of near term climate predictions. Here we achieve ensembles of global atmospheric simulations to assess and attribute the reproducibility of the boreal winter atmospheric circulation against the European Centre for Medium Range Forecasts (ECMWF) twentieth century reanalysis (ERA20C). Our control experiment is driven by the observed SST/SIC from the Atmospheric Model Intercomparison Project. It is compared to a similar ensemble performed with the ECMWF model as a first step toward ERA20C. Moreover, a two-tier methodology is used to disentangle externally-forced versus internal variations in the observed SST/SIC boundary conditions and run additional ensembles allowing us to attribute the observed atmospheric variability. The focus is mainly on the North Atlantic Oscillation (NAO) variability which is more reproducible in our model than in the ECMWF model. This result is partly due to the simulation of a positive NAO trend across the full 1920-2014 integration period. In line with former studies, this trend might be mediated by a circumglobal teleconnection mechanism triggered by increasing precipitation over the tropical Indian Ocean (TIO). Surprisingly, this response is mainly related to the internal SST variability and is not found in the ECMWF model driven by an alternative SST dataset showing a weaker TIO warming in the first half of the twentieth century. Our results may reconcile the twentieth century observations with the twenty-first century projections of the NAO. They should be however considered with caution given the limited size of our ensembles, the possible influence of other sources of NAO variability, and the uncertainties in the tropical SST trend and breakdown between internal versus externally-forced variability.

  16. Should the United States Marine Corps Refine Its System of Active Component Enlisted Recruitment in Order to Target the Needs of Select Marine Corps Reserve Units?

    Science.gov (United States)

    2012-03-23

    on its investment by not establishing a connection between the AC recruiting missions and the needs of the proximal reserve units. By establishing this...which encourages the continuum of service. The end result of this transition is an opportunity to better meet the needs of the AC and the RC, while

  17. biojs-io-biom, a BioJS component for handling data in Biological Observation Matrix (BIOM format [version 2; referees: 1 approved, 2 approved with reservations

    Directory of Open Access Journals (Sweden)

    Markus J. Ankenbrand

    2017-01-01

    Full Text Available The Biological Observation Matrix (BIOM format is widely used to store data from high-throughput studies. It aims at increasing interoperability of bioinformatic tools that process this data. However, due to multiple versions and implementation details, working with this format can be tricky. Currently, libraries in Python, R and Perl are available, whilst such for JavaScript are lacking. Here, we present a BioJS component for parsing BIOM data in all format versions. It supports import, modification, and export via a unified interface. This module aims to facilitate the development of web applications that use BIOM data. Finally, we demonstrate its usefulness by two applications that already use this component. Availability: https://github.com/molbiodiv/biojs-io-biom, https://dx.doi.org/10.5281/zenodo.218277

  18. Use of complementary health approaches at military treatment facilities, active component, U.S. Armed Forces, 2010-2015.

    Science.gov (United States)

    Williams, Valerie F; Clark, Leslie L; McNellis, Mark G

    2016-07-01

    Survey-based research has demonstrated the increasing use and acceptance of complementary and alternative medicine (CAM) in general and military populations. This report summarizes the use of three CAM procedures (chiropractic/osteopathic manipulation, acupuncture, and biofeedback) among active component service members from 2010 through 2015. Findings document a marked increase in the use of chiropractic/osteopathic manipulation and acupuncture procedures since 2010. The majority of the 240 military installations in this analysis provided chiropractic/osteopathic manipulation; more than three-quarters provided acupuncture; and approximately one-third provided biofeedback procedures. "Other and unspecified disorders of the back" was the most frequent condition for which chiropractic/osteopathic manipulation and acupuncture were used. "Non-allopathic lesions not elsewhere classified" was the second most frequent diagnosis during chiropractic/osteopathic manipulation-related visits. The second and third most frequent diagnoses during acupuncture-related visits were "acute and chronic pain" and "adjustment reaction," respectively. "Adjustment reaction" was the second most frequent diagnosis associated with biofeedback. Continued research is needed to gain a better understanding of why military personnel are using CAM and the role these procedures play in their health care.

  19. Total Force Policy Report to the Congress. Supplement

    Science.gov (United States)

    1990-01-01

    5 Grissmer, David W. and Jennifer Kawata, Total Force Manpower Management: Personnel Flows Between Active and Reserve Components, The RAND...operating, and supporting forces and recognizes both short- and long-term effects on defense fuiding . When defense force structure is changed, the

  20. Cognitive Functions and Cognitive Reserve in Relation to Blood Pressure Components in a Population-Based Cohort Aged 53 to 94 Years

    Directory of Open Access Journals (Sweden)

    Nunzia Giordano

    2012-01-01

    Full Text Available In 288 men and women from general population in a cross-sectional survey, all neuropsychological tests were negatively associated with age; memory and executive function were also positively related with education. The hypertensives (HT were less efficient than the normotensives (NT in the test of memory with interference at 10 sec (MI-10 (−33%, P=0.03, clock drawing test (CLOX (−28%, P<0.01, and mini-mental state examination (MMSE (−6%, P=0.02. Lower MMSE, MI-10, and CLOX were predicted by higher systolic (odds ratio, OR, 0.97, P=0.02; OR 0.98, P<0.005; OR 0.95, P<0.001 and higher pulse blood pressure (BP (OR 0.97, P=0.02; OR 0.97, P<0.01; and 0.95, P<0.0001. The cognitive reserve index (CRI was 6% lower in the HT (P=0.03 and was predicted by higher pulse BP (OR 0.82, P<0.001. The BP vectors of lower MMSE, MI-10, and CLOX were directed towards higher values of systolic and diastolic BP, that of low CRI towards higher systolic and lower diastolic. The label of hypertension and higher values of systolic or pulse BP are associated to worse memory and executive functions. Higher diastolic BP, although insufficient to impair cognition, strengthens this association. CRI is predicted by higher systolic BP associated to lower diastolic BP.

  1. Differential enhancement of early and late components of the cerebral somatosensory evoked potentials during forced-paced cognitive tasks in man.

    Science.gov (United States)

    Desmedt, J E; Robertson, D

    1977-10-01

    in the cortical s.e.p. on the basis of their time domains (roughly 18-70 msec, 70 to 200-250 msec and over 200 msec after the finger stimuli), cerebral hemispheres topography and cognitive parameters. Verbal instructions defining specific perceptual tasks can to a large extent switch on and off the components of the second and third categories when the processing resources of motivated subjects are fully committed in a well designed forced paced paradigm. In certain individuals physiological evidence for a different ;stimulus set' processing of target (P(100)) and non-target (N(140)) signals was documented for the first time.

  2. The Creative Application of Science, Technology and Work Force Innovations to the Decontamination and Decommissioning of the Plutonium Finishing Plant at the Hanford Nuclear Reservation

    International Nuclear Information System (INIS)

    Charboneau, S.; Klos, B.; Heineman, R.; Skeels, B.; Hopkins, A.

    2006-01-01

    's approach to overcome these challengers are described. Many of the challenges to the D and D work at PFP were met with innovative approaches based on new science and/or technology and many were also based on the creativity and motivation of the work force personnel. (authors)

  3. Reservations about the conclusions of the interdivisional (APA Divisions 12 & 29) task force on evidence-based therapy relationships: what do we know, what don't we know?

    Science.gov (United States)

    Kazantzis, Nikolaos; Cronin, Timothy J; Norton, Peter J; Lai, Jerry; Hofmann, Stefan G

    2015-05-01

    We offer a critical and constructive appraisal of the conclusions provided by the Interdivisional (American Psychological Association [APA] Divisions 12 & 29) Task Force on Evidence-Based Therapy Relationships. We highlight problems in overlapping terminology and definitions, as well as problems in the conduct of its meta-analyses (i.e., duplication of studies between reviews, inappropriate study inclusion, and use of measures of specific constructs for the calculation of effects for multiple relationship elements). On this basis, we express reservation about the conclusions offered by the APA Task Force. This special issue explores whether there are other therapeutic relationship elements that warrant consideration and further study. We were particularly interested in those elements that showed promise based on empirical or theoretical grounds, and in each article, we asked for an account of how the case formulation would guide the methods of adaptation for each individual client, and how the element would contribute to clinically relevant changes. © 2015 Wiley Periodicals, Inc.

  4. Theater Civil Affairs Soldiers: A Force at Risk

    National Research Council Canada - National Science Library

    Florig, William R

    2006-01-01

    .... To make it relevant for the nation building operations of the future, the Active force needs to be greatly expanded while the Reserve Component must be right-sized and realigned to reflect recruiting...

  5. Reserve Component Programs, Fiscal Year 1987.

    Science.gov (United States)

    1987-01-01

    Paraguay Barbuda Ecuador India Peru Argentina Egypt Israel Philippines Australia England Italy Portugal Austria Fiji Jamaica Puerto Rico Bahamas France...Baguero Commander, Ecuadoran First Air Presidente , Junta Civic Archidona, Zone Ecuador * Navarrete, Colonel William * Marsh, Honorable John 0. Jr...Mobilization Concepts (Policy) Development Center " Shiguango, Mr. Sharimiat 0 Temple, Lieutenant General Herbert Presidente , Conncejo Archidona, R. Jr

  6. Reserve Component Contribution to Imagery Intelligence

    National Research Council Canada - National Science Library

    Stafford, Ann

    2003-01-01

    .... Because raw imagery has limited value until it has been exploited, the increased volume of raw imagery demands an enhanced ability for combatant commanders and the National Imagery and Mapping Agency (NIMA...

  7. Medical Readiness of the Reserve Component

    Science.gov (United States)

    2012-01-01

    51 Some Dental Plans Are Cheaper—Comparison of Five Treatment Sources...in need of such care, 49 percent had more than one tooth needing treatment , 71 percent had periodontal disease, and 68 percent required one or more...preventive dental care, such as annual teeth cleaning (prophylaxis), fluo- ride treatment , and periodontal care. Complicated Nature of Medical Readiness

  8. Army Reserve Component Personalized Empowerment Program (ARCPEP)

    Science.gov (United States)

    2010-10-01

    in U.S. hospitals—2007. Am J Health Syst Pharm 2008; 65:2244-64 2. Hardiker NR, Grant MJ. Barriers and facilitators that affect public engagement with eHealth services. Stud Health Technol Inform 2010; 160:13-7

  9. An Inventory of Aquatic Macroinvertebrates and Calculation of Selected Biotic Indices for the U.S. Army Atterbury Reserve Forces Training Area near Edinburgh, Indiana, September 2000 - August 2002

    Science.gov (United States)

    Robinson, Bret A.

    2004-01-01

    An investigation was conducted to establish an inventory of aquatic macroinvertebrates in the streams at the U.S. Army Atterbury Reserve Forces Training Area near Edinburgh, Indiana. The data used to develop this inventory were collected during two sampling efforts in September 2000 and July and August 2002. The inventory identified 173 distinct taxa within the study-area streams. Although no rare or endangered species were found, one identified species, Cordulegaster maculata Selys (a twin-spotted spiketail dragonfly), is recognized by the Indiana Department of Natural Resources as being rare enough to warrant special concern.

  10. CellNetVis: a web tool for visualization of biological networks using force-directed layout constrained by cellular components.

    Science.gov (United States)

    Heberle, Henry; Carazzolle, Marcelo Falsarella; Telles, Guilherme P; Meirelles, Gabriela Vaz; Minghim, Rosane

    2017-09-13

    The advent of "omics" science has brought new perspectives in contemporary biology through the high-throughput analyses of molecular interactions, providing new clues in protein/gene function and in the organization of biological pathways. Biomolecular interaction networks, or graphs, are simple abstract representations where the components of a cell (e.g. proteins, metabolites etc.) are represented by nodes and their interactions are represented by edges. An appropriate visualization of data is crucial for understanding such networks, since pathways are related to functions that occur in specific regions of the cell. The force-directed layout is an important and widely used technique to draw networks according to their topologies. Placing the networks into cellular compartments helps to quickly identify where network elements are located and, more specifically, concentrated. Currently, only a few tools provide the capability of visually organizing networks by cellular compartments. Most of them cannot handle large and dense networks. Even for small networks with hundreds of nodes the available tools are not able to reposition the network while the user is interacting, limiting the visual exploration capability. Here we propose CellNetVis, a web tool to easily display biological networks in a cell diagram employing a constrained force-directed layout algorithm. The tool is freely available and open-source. It was originally designed for networks generated by the Integrated Interactome System and can be used with networks from others databases, like InnateDB. CellNetVis has demonstrated to be applicable for dynamic investigation of complex networks over a consistent representation of a cell on the Web, with capabilities not matched elsewhere.

  11. TOTAL FORCE INTEGRATION: PROVIDING STABILITY FOR CITIZEN SOLDIERS IN AN EVER CHANGING AIR FORCE

    Science.gov (United States)

    2016-10-01

    Reserve Component.”91 While this is a step toward Total Force integration , there are certain limitations. One of the most significant disadvantages to...AU/ACSC/2016 AIR COMMAND AND STAFF COLLEGE AIR UNIVERSITY TOTAL FORCE INTEGRATION : PROVIDING STABILITY FOR CITIZEN SOLDIERS IN AN EVER...CHANGING AIR FORCE by Patricia M. Adams, Major, USAFR A Research Report Submitted to the Faculty In Partial Fulfillment of the Graduation

  12. DelPhiForce web server: electrostatic forces and energy calculations and visualization.

    Science.gov (United States)

    Li, Lin; Jia, Zhe; Peng, Yunhui; Chakravorty, Arghya; Sun, Lexuan; Alexov, Emil

    2017-11-15

    Electrostatic force is an essential component of the total force acting between atoms and macromolecules. Therefore, accurate calculations of electrostatic forces are crucial for revealing the mechanisms of many biological processes. We developed a DelPhiForce web server to calculate and visualize the electrostatic forces at molecular level. DelPhiForce web server enables modeling of electrostatic forces on individual atoms, residues, domains and molecules, and generates an output that can be visualized by VMD software. Here we demonstrate the usage of the server for various biological problems including protein-cofactor, domain-domain, protein-protein, protein-DNA and protein-RNA interactions. The DelPhiForce web server is available at: http://compbio.clemson.edu/delphi-force. delphi@clemson.edu. Supplementary data are available at Bioinformatics online. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

  13. Transformation of Taiwan’s Reserve Force

    Science.gov (United States)

    2017-01-01

    sim - ulations, and games have important value, but they miss other quali- tative factors that history shows are important and often decisive for...deployed on Taiwan’s frontline islands at locations that Wins Most Gold Medals at Asia Pacific ICT Competition,” Focus Taiwan, November 26, 2015; and John...are sim - ilar in one key respect: They confront an overtly hostile neighbor (in Taiwan’s case) or neighbors (in Israel’s) who pose an existential

  14. Handbook of force transducers

    CERN Document Server

    Stefanescu, Dan Mihai

    2011-01-01

    Part I introduces the basic ""Principles and Methods of Force Measurement"" acording to a classification into a dozen of force transducers types: resistive, inductive, capacitive, piezoelectric, electromagnetic, electrodynamic, magnetoelastic, galvanomagnetic (Hall-effect), vibrating wires, (micro)resonators, acoustic and gyroscopic. Two special chapters refer to force balance techniques and to combined methods in force measurement. Part II discusses the ""(Strain Gauge) Force Transducers Components"", evolving from the classical force transducer to the digital / intelligent one, with the inco

  15. Differentiating malignant from benign breast tumors on acoustic radiation force impulse imaging using fuzzy-based neural networks with principle component analysis

    Science.gov (United States)

    Liu, Hsiao-Chuan; Chou, Yi-Hong; Tiu, Chui-Mei; Hsieh, Chi-Wen; Liu, Brent; Shung, K. Kirk

    2017-03-01

    Many modalities have been developed as screening tools for breast cancer. A new screening method called acoustic radiation force impulse (ARFI) imaging was created for distinguishing breast lesions based on localized tissue displacement. This displacement was quantitated by virtual touch tissue imaging (VTI). However, VTIs sometimes express reverse results to intensity information in clinical observation. In the study, a fuzzy-based neural network with principle component analysis (PCA) was proposed to differentiate texture patterns of malignant breast from benign tumors. Eighty VTIs were randomly retrospected. Thirty four patients were determined as BI-RADS category 2 or 3, and the rest of them were determined as BI-RADS category 4 or 5 by two leading radiologists. Morphological method and Boolean algebra were performed as the image preprocessing to acquire region of interests (ROIs) on VTIs. Twenty four quantitative parameters deriving from first-order statistics (FOS), fractal dimension and gray level co-occurrence matrix (GLCM) were utilized to analyze the texture pattern of breast tumors on VTIs. PCA was employed to reduce the dimension of features. Fuzzy-based neural network as a classifier to differentiate malignant from benign breast tumors. Independent samples test was used to examine the significance of the difference between benign and malignant breast tumors. The area Az under the receiver operator characteristic (ROC) curve, sensitivity, specificity and accuracy were calculated to evaluate the performance of the system. Most all of texture parameters present significant difference between malignant and benign tumors with p-value of less than 0.05 except the average of fractal dimension. For all features classified by fuzzy-based neural network, the sensitivity, specificity, accuracy and Az were 95.7%, 97.1%, 95% and 0.964, respectively. However, the sensitivity, specificity, accuracy and Az can be increased to 100%, 97.1%, 98.8% and 0.985, respectively

  16. Criteria for the Minimum Operation Length of Internal Forces as a Function of the Development of an Optimum Structure of Machinery Structural Components

    Directory of Open Access Journals (Sweden)

    Fligiel M.

    2016-12-01

    Full Text Available The present study analyzes the operation length of internal forces (DDSW understood as the length of the flow of internal forces along the shortest possible internal routes. The operation length of internal forces is determined on the basis of stresses and the given volume in the constructional space. The minimum DDSW of the structure satisfies the criterial conditions of the most rigid structure, where the potential energy of deformation and the deformation energy potential is the same in the whole volume and thus the potential gradient is zero.

  17. Joint Force Fires Coordination: Towards a Joint Force Answer

    National Research Council Canada - National Science Library

    Fearn, William

    1997-01-01

    .... Components compete for decisive effect not only with each other but with the joint force. The contemporary joint force is confederated, the joint force headquarters a weak arbitration authority...

  18. 78 FR 40446 - Meeting of the National Commission on the Structure of the Air Force

    Science.gov (United States)

    2013-07-05

    ... personnel of the reserve components of the Air Force could be recruited; (e) maintains a peacetime rotation.... The Commission's staff will assign time to oral commenters at the meeting, for no more than 5 minutes...

  19. Rethinking the existence of a steady-state Δψ component of the proton motive force across plant thylakoid membranes.

    Science.gov (United States)

    Johnson, Matthew P; Ruban, Alexander V

    2014-02-01

    Light-driven photosynthetic electron transport is coupled to the movement of protons from the chloroplast stroma to the thylakoid lumen. The resulting proton motive force that is generated is used to drive the conformational rotation of the transmembrane thylakoid ATPase enzyme which converts ADP (adenosine diphosphate) and Pi (inorganic phosphate) into ATP (adenosine triphosphate), the energy currency of the plant cell required for carbon fixation and other metabolic processes. According to Mitchell's chemiosmotic hypothesis, the proton motive force can be parsed into the transmembrane proton gradient (ΔpH) and the electric field gradient (Δψ), which are thermodynamically equivalent. In chloroplasts, the proton motive force has been suggested to be split almost equally between Δψ and ΔpH (Kramer et al., Photosynth Res 60:151-163, 1999). One of the central pieces of evidence for this theory is the existence of a steady-state electrochromic shift (ECS) absorption signal detected ~515 nm in plant leaves during illumination. The interpretation of this signal is complicated, however, by a heavily overlapping absorption change ~535 nm associated with the formation of photoprotective energy dissipation (qE) during illumination. In this study, we present new evidence that dissects the overlapping contributions of the ECS and qE-related absorption changes in wild-type Arabidopsis leaves using specific inhibitors of the ΔpH (nigericin) and Δψ (valinomycin) and separately using leaves of the Arabidopsis lut2npq1 mutant that lacks qE. In both cases, our data show that no steady-state ECS signal persists in the light longer than ~60 s. The consequences of our observations for the suggesting parsing of steady-state thylakoid proton motive force between (ΔpH) and the electric field gradient (Δψ) are discussed.

  20. Gynecologic disorders diagnosed during deployment to Southwest/Central Asia, active component females, U.S. Armed Forces, 2008-2013.

    Science.gov (United States)

    2014-08-01

    Service women in the U.S. Armed Forces face unique challenges that may lead to or exacerbate gynecologic disorders - particularly during deployment. This report documented that approximately one in 10 military women who served in Southwest/Central Asia were diagnosed with a gynecologic disorder at least once during deployment. In addition, gynecologic disorders accounted for approximately one of every 20 medical evacuations of female service members from the war zone. A majority of clinically significant gynecologic disorder cases were attributable to irregular menstruation/bleeding or unspecified inflammation or pain of the female genital organs. Incidence rates of gynecologic disorder diagnoses were higher among black, non-Hispanic service women, among younger women, and among those in the Army and in motor transport and communications/intelligence occupations. Approximately 50% of gynecologic disorder cases had received gynecologic care within 6 months prior to deployment and nearly 90% had received care within 2 years of deployment. Despite pre-deployment care, it is apparent from this report that service women need continuous access to gynecologic care during deployment, particularly if conditions during deployment lead to and exacerbate gynecologic disorders.

  1. Investigation of the influence of FDM operating parameters on dynamic force response using IV-optimal design and principal component analysis

    Science.gov (United States)

    Mohamed, Omar Ahmed; Masood, Syed Hasan; Bhowmik, Jahar Lal

    2017-07-01

    To improve the functionality in regards to manufacturing products at low cost, several innovative additive manufacturing processes have been developed. Fused deposition modeling (FDM) is one the most prominent additive manufacturing processes for producing plastic products. Referring to the quality and functionality, there are many FDM process conditions contributing to the occurrence of poor quality and functionality of FDM manufactured products. Therefore, the effect of the build parameters on the functionality of FDM produced products need to be examined. In this study, an attempt has also been made to investigate the critical processing parameters affecting dynamic mechanical response of plastic part processed by FDM technology using IV-optimal response surface method coupled with principal component analysis technique. The results obtained from this study can be used in the future as a guide for future in selecting the appropriate process conditions before the manufacturing process of the product take place.

  2. Depression and suicidality during the postpartum period after first time deliveries, active component service women and dependent spouses, U.S. Armed Forces, 2007-2012.

    Science.gov (United States)

    Do, Tai; Hu, Zheng; Otto, Jean; Rohrbeck, Patricia

    2013-09-01

    Although suicide is a leading cause of death among new mothers during the postpartum period, there has been limited research on self-harm in the postpartum period and associated risk factors. One potential risk factor for suicidality (completed suicides, suicide attempts, and suicide ideation including thoughts of self harm) during the postpartum period is postpartum depression (PPD). In this study of women who gave birth for the first time between 1 January 2007 and 31 December 2011, 5,267 (9.9% of all who delivered) active component service women and 10,301 (8.2%) dependent spouses received incident PPD diagnoses during the one year postpartum period; 213 (0.4%) service women and 221 (0.2%) dependent spouses were diagnosed with incident suicidality. After adjusting for the effects of other covariates, service women with PPD had 42.2 times the odds to be diagnosed with suicidality in the postpartum period compared to service women without PPD; dependent spouses with PPD had 14.5 times the odds compared to those without PPD. The findings of this report suggest that a history of mental disorders was common among service women and dependent spouses with PPD in the postpartum period, and, in turn, PPD was a strong predictor for suicidality in the postpartum period. These results emphasize the importance of PPD screening during the postpartum period. They also suggest that additional focused screening for suicidal behavior among those already diagnosed with PPD may be warranted.

  3. Relationships between diagnoses of sexually transmitted infections and urinary tract infections among male service members diagnosed with urethritis, active component, U.S. Armed Forces, 2000-2013.

    Science.gov (United States)

    2014-07-01

    A previous MSMR report found that 42.8% of all incident (first-time) urinary tract infections (UTIs) in males, but only 0.4% of such UTIs in females, were diagnosed as "urethritis, unspecified" (ICD-9: 597.80). This study explored the possibility that many of the diagnoses of urethritis in males represented sexually transmitted infections (STIs), even though ICD-9: 597.80 is explicitly reserved for cases of urethritis that are deemed to not be sexually transmitted. Examined were relationships between diagnoses of urethritis, diagnoses of STIs, and recurrent diagnoses of UTIs. Male service members who received a diagnosis of "urethritis, unspecified" (ICD-9: 597.80) had an increased risk of a subsequent UTI diagnosis, especially of "urethritis, unspecified," compared to all male service members. Most service members who were diagnosed with "urethritis, unspecified" had no documented diagnoses of an STI in their Military Health System health records; however, recurrent UTIs were more common among service members who did have documented STIs. The most commonly diagnosed STIs in this study were "other non-gonococcal urethritis" (which includes that caused by Chlamydia trachomatis) and gonorrhea.

  4. Joint Task Force -Guantanamo Bay, Cuba: Open or Close?

    Science.gov (United States)

    2013-03-01

    refuge on the base. U.S. Marines and Cuban militiamen then began patrolling opposite sides of the base’s 17.4 mile fence line. Today, U.S. Marines ...of the Army, Air Force, Marines , Navy, and Coast Guard. Reserve component personnel were also deployed on the mission. Military police personnel...combination cells for legal visits (not to house detainees). Camp Echo requires a guard force of approximately 40 personnel.24 Camp Iguana Camp new mission

  5. Cultural Changes Required in the Army to Truly Achieve a Total Force

    Science.gov (United States)

    2016-02-16

    and institutionalize the progress that has already been made towards the Total Force concept. The first recommendation is to increase marketing ...Force’s successful transition to a total force culture is their reliance on their reserve components for entire segments of basic training. For example...been made towards the Total Force concept. The first recommendation is to increase marketing , recruitment, and leadership communication in the Army

  6. Cognitive reserve in aging.

    Science.gov (United States)

    Tucker, A M; Stern, Y

    2011-06-01

    Cognitive reserve explains why those with higher IQ, education, occupational attainment, or participation in leisure activities evidence less severe clinical or cognitive changes in the presence of age-related or Alzheimer's disease pathology. Specifically, the cognitive reserve hypothesis is that individual differences in how tasks are processed provide reserve against brain pathology. Cognitive reserve may allow for more flexible strategy usage, an ability thought to be captured by executive functions tasks. Additionally, cognitive reserve allows individuals greater neural efficiency, greater neural capacity, and the ability for compensation via the recruitment of additional brain regions. Taking cognitive reserve into account may allow for earlier detection and better characterization of age-related cognitive changes and Alzheimer's disease. Importantly, cognitive reserve is not fixed but continues to evolve across the lifespan. Thus, even late-stage interventions hold promise to boost cognitive reserve and thus reduce the prevalence of Alzheimer's disease and other age-related problems.

  7. Army Reserve Component Personal Empowerment Program #2 (ARCPEP 2)

    Science.gov (United States)

    2015-12-01

    College Students and Campus Dining Options Sleep Quality, not Sleep Quantity, Correlates with Academic ... sleep time. Practice Gap: In their role to promote student health and improve student performance , college health practitioners and student counselors... Performance Vegetarian-style Eating in College Students : Diet Survey Analysis and BMI Vitamin D Deficiency in College Students :

  8. ARCPEP Project - Army Reserve Component Personal Empowerment Program

    Science.gov (United States)

    2011-04-01

    Appendix 5 Perceived Stress Scale The questions in this scale ask you about your feelings and thoughts during the last month. In each case , you will be...5. How many servings of red meat, hamburger or meat products (ham, sausage , etc.) do you consume per day? (1 serving = 3.5-5 ounces) ə 6. How...consume chicken, turkey instead of veal, pork, hamburger or sausage ? Yes 14. How many times per week do you consume vegetables, pasta, rice or other

  9. Evaluation of HRV Biofeedback as a Resilience Building Reserve Component

    Science.gov (United States)

    2017-08-01

    3  4  5  6  7  b. Mental health professional (e.g., psychologist , psychiatrist, clinical social worker, or other mental health counselor) 1  2  3...professional at a military facility (e.g., psychologist , psychiatrist, clinical social worker, or other mental health counselor...professional (e.g., psychologist , psychiatrist, clinical social worker, or other mental health counselor

  10. Analysis of Employer Costs from Reserve Component Mobilization

    Science.gov (United States)

    2004-12-01

    Owner Discussion. The owner has about 15 employees. One of them, his service manager , was called to active duty in 2001. The owner estimates...have received from the service manager on the job. The owner was vaguely cognizant of the existence of USERRA, but he did not have cost numbers...run—the service manager has been back on the job for nearly a year—he still has not been able to recoup all of the business lost during the

  11. 2012 Survey of Reserve Components Spouses (RCSS): Tabulations of Responses

    Science.gov (United States)

    2012-09-30

    120  o.  Loneliness ...happened ..................................... 434  i.  Wished he/she could make things different ........................................ 436  j...588  94.  What is your gender ? Constructed from administrative data ........................ 590  95.  Did you

  12. Analysis of Employer Costs from Reserve Component Mobilization

    National Research Council Canada - National Science Library

    Doyle, Colin M; Gotz, Glenn A; Singer, Neil M; Tyson, Karen W

    2004-01-01

    .... Evidence is presented suggesting that the most significant costs for small employers are related to lost productivity and sales rather than to the costs associated with the requirements imposed...

  13. Army Reserve Components Research Roadmap Volume 1: ARI Research Summary

    Science.gov (United States)

    1997-09-01

    In Holz, R., Hiller , J., & McFann, H. (Eds.) Determinants of Effective Unit Performance. Alexandria, VA: U.S. Army Research Institute for the...Functions Critical to Combat Operations. In Holz, R., Hiller , J., & McFann, H. (Eds.) Determinants of Effective Unit Performance. Alexandria, VA: U.S. Army...throughout mobilization for both soldiers and officers. Table 3-3. 1Previous Mobilization Arrangements and Nespondenls t Eva !.to-O O - Well Their

  14. Other components

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    This chapter includes descriptions of electronic and mechanical components which do not merit a chapter to themselves. Other hardware requires mention because of particularly high tolerance or intolerance of exposure to radiation. A more systematic analysis of radiation responses of structures which are definable by material was given in section 3.8. The components discussed here are field effect transistors, transducers, temperature sensors, magnetic components, superconductors, mechanical sensors, and miscellaneous electronic components

  15. Labor Force

    Science.gov (United States)

    Occupational Outlook Quarterly, 2012

    2012-01-01

    The labor force is the number of people ages 16 or older who are either working or looking for work. It does not include active-duty military personnel or the institutionalized population, such as prison inmates. Determining the size of the labor force is a way of determining how big the economy can get. The size of the labor force depends on two…

  16. Financial Issues of Reserve Service: A Report from the 1992 Reserve Components Survey

    National Research Council Canada - National Science Library

    Miskura, Susan

    1997-01-01

    .... The questionnaire was mailed to 76,783 members with responses received from 47%. The objective of this report was to analyze issues relating to individual and unit readiness focusing on financial aspects...

  17. Equivalent linearization of nonlinear forces

    Science.gov (United States)

    Meng, Guang; Xue, Zhongqing

    1987-07-01

    A method used for equivalent linearization of the two orthogonal squeeze-film forces is extended here to the general case of n degrees of freedom and n components of nonlinear forces, and the expressions for equivalent linear coefficients are derived. Nonlinear forces can be linearized by the methods of Fourier expansion, active and reactive powers, or mean-square error. The n components of nonlinear forces can all be expressed formally as the sum of an average force, a linear spring force, and a linear damping force. This paper also gives a flow chart for calculating the steady-state responses of a nonlinear system with many degrees of freedom, using the method of equivalent linearization. The resulting saving in computation time is demonstrated by a numerical example of a flexible rotor-bearing system with a noncentralized squeeze-film damper.

  18. Annual Report of the Secretary of Defense on Reserve Forces

    Science.gov (United States)

    1970-01-01

    State On-Site Units El iminated R•plsccenent Units Hawaii I Group ilq and 1lq I Fi:eld Depxit 11l and By t tje Vy llq Company 4 F:iring Batteries 1...travel co&tas. Originally $120.1 million war prograined for active duty t.rain Luig of Rescrve Enlistment Program jpers.•n1( el . Subi;,queiit r...groups of tOe mall surf&-e division in Tallahassee, Florida., Ahere Project ITKCH ti conducted at Florid4 State Univerdity .ducation Research Center

  19. Enhancing the Wellness of Reserve Forces: A Strategic Challenge

    National Research Council Canada - National Science Library

    Pufal, Sandra

    2001-01-01

    ... maintenance program and the Department of Defense HOOAH4HEALTH promotion program. Wellness is the integration of body, mind, and spirit to produce a balanced lifestyle by practicing good health habits and eliminating harmful ones...

  20. Theater Sustainment Reserve for the Rwanda Defence Forces

    Science.gov (United States)

    2016-06-10

    with pockets of poverty among the unemployed youth (Bremmer 2015). Since 2013, Al-Shabaab has launched high- profile operations. Most publicized...among those are the September 2013 Westgate Mall attack in Nairobi and the May 2014 attack against a restaurant in Djibouti. The Westgate attack killed...Tanzania’s annual GDP, and affected a wide range of local consumers , businesses and government agencies” (The World Bank 2013). The World Bank

  1. Operational Reservations: Considerations for a Total Army Force

    Science.gov (United States)

    2014-06-01

    compo- nent can practice every single day. The Guard gets to practice 39-40 days out of the year. So if you want a football team that can do one...true.” How so? They are fac - tual, common-sense statements. It is beyond this author’s under- standing how RC leaders can believe that training part

  2. Implementing Smart Cards into the Air Force Reserve

    National Research Council Canada - National Science Library

    McClannan, Keith

    2001-01-01

    Smart card technology is essentially about a credit card with a brain. Smart cards have an embedded microchip that allows the card to hold digital data up to the available memory installed on the card...

  3. Implementing Smart Cards into the Air Force Reserve

    National Research Council Canada - National Science Library

    McClannan, Keith

    2002-01-01

    Smart card technology is essentially about a credit card with a brain, Smart cards have an embedded microchip that allows the card to hold digital data up to the available memory installed on the card...

  4. Marine Forces Reserve: Accelerating Knowledge Flow through Asynchronous Learning Technologies

    Science.gov (United States)

    2014-12-19

    Worth, TX) 25th Mar (Devens, MA) *24th Mar (Kansas City, MO) 23rd Mar (San Bruno , CA) MAG-49 (JB MDL, NJ) MAG-41 (Ft. Worth, TX) UNCLASSIFIED/FOUO...5 MFR Organizational Portrait COMMARFORRES (New Orleans, LA) HQ Bn (New Orleans, LA) 4th Marine Aircraft Wing (New Orleans, LA) 14th Mar (Ft

  5. Enhancing the Wellness of Reserve Forces: A Strategic Challenge

    Science.gov (United States)

    2001-01-01

    reduce the risk of cancer . Alcohol is being consumed at an early age and without intervention , addiction is inevitable. Use of alcohol can lead to...stress management, alcohol and drug abuse prevention, communicable and chronic disease prevention (including cancer and cardiovascular disease prevention...this survey indicated: "* The majority (55%) of the male soldiers does not examine their testicles for lumps. "* The majority of the male respondents

  6. Improved Distance Learning Environment For Marine Forces Reserve

    Science.gov (United States)

    2016-09-01

    devices at an increasing rate, (2) becoming familiar with their usage and capabilities, and (3) connecting more to the Internet . The three...other aspect of this collection of information, including suggestions for reducing this burden, to Washington headquarters Services, Directorate for...The current alternative is for MFR personnel to use personal devices outside of the Nonsecure Internet Protocol Router Network (NIPRNET). This

  7. Dispersion Forces

    CERN Document Server

    Buhmann, Stefan Yoshi

    2012-01-01

    In this book, a modern unified theory of dispersion forces on atoms and bodies is presented which covers a broad range of advanced aspects and scenarios. Macroscopic quantum electrodynamics is shown to provide a powerful framework for dispersion forces which allows for discussing general properties like their non-additivity and the relation between microscopic and macroscopic interactions. It is demonstrated how the general results can be used to obtain dispersion forces on atoms in the presence of bodies of various shapes and materials. Starting with a brief recapitulation of volume I, this volume II deals especially with bodies of irregular shapes, universal scaling laws, dynamical forces on excited atoms, enhanced forces in cavity quantum electrodynamics, non-equilibrium forces in thermal environments and quantum friction. The book gives both the specialist and those new to the field a thorough overview over recent results in the field. It provides a toolbox for studying dispersion forces in various contex...

  8. COGNITIVE RESERVE IN AGING

    Science.gov (United States)

    Tucker, Adrienne M.; Stern, Yaakov

    2011-01-01

    Cognitive reserve explains why those with higher IQ, education, occupational attainment, or participation in leisure activities evidence less severe clinical or cognitive changes in the presence of age-related or Alzheimer’s disease pathology. Specifically, the cognitive reserve hypothesis is that individual differences in how tasks are processed provide reserve against brain pathology. Cognitive reserve may allow for more flexible strategy usage, an ability thought to be captured by executive functions tasks. Additionally, cognitive reserve allows individuals greater neural efficiency, greater neural capacity, and the ability for compensation via the recruitment of additional brain regions. Taking cognitive reserve into account may allow for earlier detection and better characterization of age-related cognitive changes and Alzheimer’s disease. Importantly, cognitive reserve is not fixed but continues to evolve across the lifespan. Thus, even late-stage interventions hold promise to boost cognitive reserve and thus reduce the prevalence of Alzheimer’s disease and other age-related problems. PMID:21222591

  9. HYDROCARBONS RESERVES IN VENEZUELA

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez Cruz, D.J.

    2007-07-01

    Venezuela is an important player in the energy world, because of its hydrocarbons reserves. The process for calculating oil and associated gas reserves is described bearing in mind that 90% of the gas reserves of Venezuela are associated to oil. Likewise, an analysis is made of the oil reserves figures from 1975 to 2003. Reference is also made to inconsistencies found by international experts and the explanations offered in this respect by the Ministry of Energy and Petroleum (MENPET) and Petroleos de Venezuela (PDVSA) regarding the changes that took place in the 1980s. In turn, Hubbert's Law is explained to determine peak production of conventional oil that a reservoir or field will reach, as well as its relationship with remaining reserves. Emphasis is placed on the interest of the United Nations on this topic. The reserves of associated gas are presented along with their relationship with the different crude oils that are produced and with injected gas, as well as with respect to the possible changes that would take place in the latter if oil reserves are revised. Some recommendations are submitted so that the MENPET starts preparing the pertinent policies ruling reserves. (auth)

  10. Ovarian reserve parameters

    DEFF Research Database (Denmark)

    Bentzen, J G; Forman, Julie Lyng; Pinborg, Anja

    2012-01-01

    2-5 of the menstrual cycle or during withdrawal bleeding, blood sampling and transvaginal sonography was performed. After adjusting for age, ovarian reserve parameters were lower among users than among non-users of hormonal contraception: serum AMH concentration by 29.8% (95% CI 19.9 to 38...... was observed between duration of hormonal-contraception use and ovarian reserve parameters. No dose-response relation was found between the dose of ethinyloestradiol and AMH or AFC. This study indicates that ovarian reserve markers are lower in women using sex steroids for contraception. Thus, AMH...... concentration and AFC may not retain their accuracy as predictors of ovarian reserve in women using hormonal contraception. Serum anti-Müllerian hormone (AMH) concentration is an indirect marker of the number of small follicles in the ovary and thereby the ovarian reserve. The AMH concentration is now widely...

  11. Electronic components

    CERN Document Server

    Colwell, Morris A

    1976-01-01

    Electronic Components provides a basic grounding in the practical aspects of using and selecting electronics components. The book describes the basic requirements needed to start practical work on electronic equipment, resistors and potentiometers, capacitance, and inductors and transformers. The text discusses semiconductor devices such as diodes, thyristors and triacs, transistors and heat sinks, logic and linear integrated circuits (I.C.s) and electromechanical devices. Common abbreviations applied to components are provided. Constructors and electronics engineers will find the book useful

  12. Component testing

    International Nuclear Information System (INIS)

    Hutchings, M.T.; Schofield, Peter; Seymour, W.A.J.

    1986-01-01

    A method for non-destructive testing of an industrial component to ascertain if it is a single crystal, and to find the crystal orientations of those parts of the component which are single crystals, involves irradiating the component with a monochromatic collimated neutron beam. Diffracted neutron beams are observed live by means of LiF/ZnS composite screen, an image intensifier and a television camera and screen. (author)

  13. Skyline Reservation System

    Data.gov (United States)

    US Agency for International Development — Flight reservation application used for in-country flights by USAID and DoS staff in Afghanistan. The application is managed and maintained by the vendor and USAID...

  14. Forced marriage.

    Science.gov (United States)

    2007-06-01

    Guidelines to help A&E staff and other healthcare professionals who suspect cases of forced marriage were launched this month by the government. The guidelines provide practical advice on how to recognise the warning signs, and what to do if patients disclose that they have been, or are about to be, forced to marry. The guidelines, Dealing with Cases of Forced Marriage, are available at www.fco.gov.uk/forcedmarriage.

  15. 32 CFR 903.5 - Reserve enlistment procedures.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Reserve enlistment procedures. 903.5 Section 903.5 National Defense Department of Defense (Continued) DEPARTMENT OF THE AIR FORCE MILITARY TRAINING AND SCHOOLS AIR FORCE ACADEMY PREPARATORY SCHOOL § 903.5 Reserve enlistment procedures. (a) Civilians...

  16. A Policy Analysis of Reserve Retirement Reform

    Science.gov (United States)

    2013-01-01

    adapted their manning requirements to this retention. Perhaps tasks and jobs have been designed to accommodate the reten - tion profile produced by the...a reward for a long career of service, a benefit to help transition to the civilian economy, and a means of securing the reten - tion of career...to determine their likely effect on active reten - tion, reserve affiliation after leaving an active component, reserve retention, and reserve

  17. 78 FR 37798 - Meeting of the National Commission on the Structure of the Air Force

    Science.gov (United States)

    2013-06-24

    ... Capabilities Plan. 2. Combatant Command requirements from operations plans, contingency plans, and Integrated... from Status of Resources Training Systems and Defense Readiness Reporting System. Meeting Accessibility... between the regular and reserve components of the Air Force, taking advantage of the unique strengths and...

  18. Handbook on loss reserving

    CERN Document Server

    Schmidt, Klaus; Schnaus, Anja

    2016-01-01

    This handbook presents the basic aspects of actuarial loss reserving. Besides the traditional methods, it also includes a description of more recent ones and a discussion of certain problems occurring in actuarial practice, like inflation, scarce data, large claims, slow loss development, the use of market statistics, the need for simulation techniques and the task of calculating best estimates and ranges of future losses. In property and casualty insurance the provisions for payment obligations from losses that have occurred but have not yet been settled usually constitute the largest item on the liabilities side of an insurer's balance sheet. For this reason, the determination and evaluation of these loss reserves is of considerable economic importance for every property and casualty insurer. Actuarial students, academics as well as practicing actuaries will benefit from this overview of the most important actuarial methods of loss reserving by developing an understanding of the underlying stochastic models...

  19. Different forces

    CERN Multimedia

    1982-01-01

    The different forces, together with a pictorial analogy of how the exchange of particles works. The table lists the relative strength of the couplings, the quanta associated with the force fields and the bodies or phenomena in which they have a dominant role.

  20. Lithium reserves and resources

    International Nuclear Information System (INIS)

    Evans, R.K.

    1978-01-01

    As a result of accelerating research efforts in the fields of secondary batteries and thermonuclear power generation, concern has been expressed in certain quarters regarding the availability, in sufficient quantities, of lithium. As part of a recent study by the National Research Council on behalf of the Energy Research and Development Administration, a subpanel was formed to consider the outlook for lithium. Principal areas of concern were reserves, resources and the 'surplus' available for energy applications after allowing for the growth in current lithium applications. Reserves and resources were categorized into four classes ranging from fully proved reserves to resources which are probably dependent upon the marketing of co-products to become economically attractive. Because of the proprietary nature of data on beneficiation and processing recoveries, the tonnages of available lithium are expressed in terms of plant feed. However, highly conservative assumptions have been made concerning mining recoveries and these go a considerable way to accounting for total losses. Western World reserves and resources of all classes are estimated at 10.6 million tonnes Li of which 3.5 million tonnes Li are located in the United States. Current United States capacity, virtually equivalent to Western World capacity, is 4700 tonnes Li and production in 1976 approximated to 3500 tonnes Li. Production for current applications is expected to grow to approx. 10,000 tonnes in year 2000 and 13,000 tonnes a decade later. The massive excess of reserves and resources over that necessary to support conventional requirements has limited the amount of justifiable exploration expenditures; on the last occasion, there was a a major increase in demand (by the USAEA) reserves and capacity were increased rapidly. There are no foreseeable reasons why this shouldn't happen again when the need is clear. (author)

  1. Oak Ridge Reservation Waste Management Plan

    Energy Technology Data Exchange (ETDEWEB)

    Turner, J.W. [ed.

    1995-02-01

    This report presents the waste management plan for the Oak Ridge Reservation facilities. The primary purpose is to convey what facilities are being used to manage wastes, what forces are acting to change current waste management systems, and what plans are in store for the coming fiscal year.

  2. Oak Ridge Reservation Waste Management Plan

    International Nuclear Information System (INIS)

    Turner, J.W.

    1995-02-01

    This report presents the waste management plan for the Oak Ridge Reservation facilities. The primary purpose is to convey what facilities are being used to manage wastes, what forces are acting to change current waste management systems, and what plans are in store for the coming fiscal year

  3. SUIKERBOSRAND NATURE RESERVE

    African Journals Online (AJOL)

    Suikerbosrand Nature Reserve and fts educational facilities are run by the Transvaal. Division of. Nature Conservation. ... tion and the education facilities provided. The former are utilized mainly by the general public ... artist Paul Bosman (already reviewed in the EEASA newsletter). The co-founders of the Foundation are.

  4. Session 7: Reserve

    International Nuclear Information System (INIS)

    Bailey, R.; Crockford, G.

    2001-01-01

    The reserve session was devoted to some issues that came up through the workshop, which were grouped into three main areas: The Global Accelerator Network, Problems of stress and how to get organized to minimize them, What should an operations group be responsible for? This paper summarizes the discussions that took place. (author)

  5. School Shootings Stun Reservation

    Science.gov (United States)

    Borja, Rhea R.; Cavanagh, Sean

    2005-01-01

    This article deals with the impact brought by the school shootings at Red Lake Indian Reservation in Minnesota to the school community. A deeply troubled 16-year-old student shot and killed seven other people and himself at a high school. The nation's deadliest school attack since the 1999 slayings at Colorado's suburban Columbine High School took…

  6. SUIKERBOSRAND NATURE RESERVE

    African Journals Online (AJOL)

    reserve, the total length being 66 km with six overnight huts. There are also the BokmakiePie. Nature Troil. and the Cheetah Interpretive Troil. which can be used by day visitors. The former has two loops, one of 10 km and another of 17 km. The. Cheetah Troil. is much shorter and various points of interest are interpreted en ...

  7. Foreign Exchange Reserves and the Reserve Bank’s Balance Sheet

    OpenAIRE

    Christian Vallence

    2012-01-01

    The Reserve Bank of Australia holds and manages the nation’s foreign exchange reserve assets in order to meet its policy objectives. While Australia’s foreign exchange reserves are relatively modest by international standards, they nonetheless constitute a sizeable portion of the Bank’s balance sheet, and variations in the Australian dollar value of these reserves are usually the most volatile component of the Bank’s profit and loss statement. This article discusses some of the key decisions ...

  8. An exploration in acoustic radiation force experienced by cylindrical shells via resonance scattering theory.

    Science.gov (United States)

    Rajabi, Majid; Behzad, Mehdi

    2014-04-01

    In nonlinear acoustic regime, a body insonified by a sound field is known to experience a steady force that is called the acoustic radiation force (RF). This force is a second-order quantity of the velocity potential function of the ambient medium. Exploiting the sufficiency of linear solution representation of potential function in RF formulation, and following the classical resonance scattering theorem (RST) which suggests the scattered field as a superposition of the resonant field and a background (non-resonant) component, we will show that the radiation force is a composition of three components: background part, resonant part and their interaction. Due to the nonlinearity effects, each part contains the contribution of pure partial waves in addition to their mutual interaction. The numerical results propose the residue component (i.e., subtraction of the background component from the RF) as a good indicator of the contribution of circumferential surface waves in RF. Defining the modal series of radiation force function and its components, it will be shown that within each partial wave, the resonance contribution can be synthesized as the Breit-Wigner form for adequately none-close resonant frequencies. The proposed formulation may be helpful essentially due to its inherent value as a canonical subject in physical acoustics. Furthermore, it may make a tunnel through the circumferential resonance reducing effects on radiation forces. Copyright © 2013 Elsevier B.V. All rights reserved.

  9. The Strategic Petroleum Reserve

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-01

    The Strategic Petroleum Reserve program was set into motion by the 1975 Energy Policy and Conservation Act (EPCA). By 1990, 590 million barrels of oil had been placed in storage. Salt domes along the Gulf Coast offered ideal storage. Both sweet'' and sour'' crude oil have been acquired using various purchase options. Drawdown, sale, and distribution of the oil would proceed according to guidelines set by EPCA in the event of a severe energy supply disruption. (SM)

  10. [Hypertrophy and coronary reserve].

    Science.gov (United States)

    Motz, W; Scheler, S

    2008-12-01

    Left ventricular hypertrophy represents the structural mechanism of adaptation of the left ventricle as the answer of a chronic pressure overload in arterial hypertension. Initially an increment in left ventricular wall thickness occurs. In this stadium of "concentric hypertrophy" LV systolic wall stress, LV ejection fraction and myocardial oxygen consumption per weight unit myocardium remain unchanged. In the further time course of disease LV dilatation will be present. In this phase of "excentric hypertrophy" LV systolic wall stress and myocardial oxygen consumption per weight unit myocardium rise and LV ejection fraction decreases. Patients with arterial hypertension frequently complain of angina pectoris. Angina pectoris and the positive exercise tolerance test or the positive myocardial scintigraphy are the consequence of the impaired coronary flow reserve. The coronary flow reserve is diminished due to structural and functional changes of the coronary circulation. ACE-inhibitors and AT1-receptor blockers cause a significant improvement of coronary flow reserve and regression of both left ventricular hypertrophy and myocardial fibrosis.

  11. Fractional Reserve Banking

    OpenAIRE

    Andreasen, Niels; Bjerregaard, Mads; Lund, Jonas; Olsen, Ove Bitsch; Rasmussen, Andreas Dalgas

    2012-01-01

    Projektet er bygget op omkring kritisk realisme, som er det gennemgående videnskabelige fundament til undersøgelsen af hvilke strukturelle grunde der er til finansiel ustabilitet i Danmark. Projektet går i dybden med Fractional Reserve Banking og incitamentsstrukturen i banksystemet. Vi bevæger os både på det makro- og mikroøkonomiske niveau i analysen. På makro niveau bruger vi den østrigske skole om konjunktur teori (The Positive Theory of the Cycle). På mikro niveau arbejder vi med princip...

  12. Component Rhinoplasty

    OpenAIRE

    Mohmand, Muhammad Humayun; Ahmad, Muhammad

    2014-01-01

    BACKGROUND According to statistics of American Society of Plastic Surgeons, cosmetic rhinoplasty was the second most frequently performed cosmetic surgery. This study shares the experiences with component rhinoplasty. METHODS From 2004 to 2010, all patients underwent aesthetic nasal surgery were enrolled. The patients requiring only correction of septal deviation and those presenting with cleft lip nasal deformity were excluded. All procedures were performed under general anaesthesia with ope...

  13. Hyperfrequency components

    Science.gov (United States)

    1994-09-01

    The document has a collection of 19 papers (11 on technologies, 8 on applications) by 26 authors and coauthors. Technological topics include: evolution from conventional HEMT's double heterojunction and planar types of pseudomorphic HEMT's; MMIC R&D and production aspects for very-low-noise, low-power, and very-low-noise, high-power applications; hyperfrequency CAD tools; parametric measurements of hyperfrequency components on plug-in cards for design and in-process testing uses; design of Class B power amplifiers and millimetric-wave, bigrid-transistor mixers, exemplifying combined use of three major types of physical simulation in electrical modeling of microwave components; FET's for power amplification at up to 110 GHz; production, characterization, and nonlinear applications of resonant tunnel diodes. Applications topics include: development of active modules for major European programs; tubes versus solid-state components in hyperfrequency applications; status and potentialities of national and international cooperative R&D on MMIC's and CAD of hyperfrequency circuitry; attainable performance levels in multifunction MMIC applications; state of the art relative of MESFET power amplifiers (Bands S, C, X, Ku); creating a hyperfrequency functions library, of parametrizable reference cells or macrocells; and design of a single-stage, low-noise, band-W amplifier toward development of a three-stage amplifier.

  14. Are uranium reserves adequate?

    International Nuclear Information System (INIS)

    Anon.

    2006-01-01

    Against a backdrop of growing concerns about global warming and geopolitical pressures on fossil energies, especially natural gas and oil, interest in nuclear power has revived considerably. Conscious of its addiction to oil and reeling from a series of gigantic blackouts, the United States, in the words of its president, must 'aggressively move forward with the construction of nuclear power plants'. Some European countries have approved new power plant construction (Finland and France), while the more reserved ones (Belgium, Germany and Sweden) have begun to show a change in attitude. Asia, meanwhile, is host to the planet's largest number of potential nuclear construction projects in this first half of the 21. century. All these signs point to a sharp rise in uranium consumption, the basic fuel for these plants. But are there enough resources to support a nuclear revival on a planetary scale? The publication of the Red Book on uranium in late May 2006 was an opportunity for Thierry Dujardin, Deputy Director of Science and Development at the OECD's Nuclear Energy Agency, to take stock of resources. He gives his opinion in this paper

  15. Variance Components

    CERN Document Server

    Searle, Shayle R; McCulloch, Charles E

    1992-01-01

    WILEY-INTERSCIENCE PAPERBACK SERIES. The Wiley-Interscience Paperback Series consists of selected books that have been made more accessible to consumers in an effort to increase global appeal and general circulation. With these new unabridged softcover volumes, Wiley hopes to extend the lives of these works by making them available to future generations of statisticians, mathematicians, and scientists. ". . .Variance Components is an excellent book. It is organized and well written, and provides many references to a variety of topics. I recommend it to anyone with interest in linear models.".

  16. Direct measurements of intermolecular forces by chemical force microscopy

    Science.gov (United States)

    Vezenov, Dmitri Vitalievich

    1999-12-01

    Detailed description of intermolecular forces is key to understanding a wide range of phenomena from molecular recognition to materials failure. The unique features of atomic force microscopy (AFM) to make point contact force measurements with ultra high sensitivity and to generate spatial maps of surface topography and forces have been extended to include measurements between well-defined organic molecular groups. Chemical modification of AFM probes with self-assembled monolayers (SAMs) was used to make them sensitive to specific molecular interactions. This novel chemical force microscopy (CFM) technique was used to probe forces between different molecular groups in a range of environments (vacuum, organic liquids and aqueous solutions); measure surface energetics on a nanometer scale; determine pK values of the surface acid and base groups; measure forces to stretch and unbind a short synthetic DNA duplex and map the spatial distribution of specific functional groups and their ionization state. Studies of adhesion forces demonstrated the important contribution of hydrogen bonding to interactions between simple organic functionalities. The chemical identity of the tip and substrate surfaces as well as the medium had a dramatic effect on adhesion between model monolayers. A direct correlation between surface free energy and adhesion forces was established. The adhesion between epoxy polymer and model mixed SAMs varied with the amount of hydrogen bonding component in the monolayers. A consistent interpretation of CFM measurements in polar solvents was provided by contact mechanics models and intermolecular force components theory. Forces between tips and surfaces functionalized with SAMs terminating in acid or base groups depended on their ionization state. A novel method of force titration was introduced for highly local characterization of the pK's of surface functional groups. The pH-dependent changes in friction forces were exploited to map spatially the

  17. The Army Selected Reserve Dental Readiness System: overview, assessment, and recommendations.

    Science.gov (United States)

    Honey, James R

    2013-06-01

    The Army Selected Reserve Dental Readiness System (ASDRS) is a key dental program directed by the Assistant Secretary of the Army (Manpower & Reserve Affairs) starting in fiscal year 09. The Army National Guard and Army Reserve have steadily implemented ASDRS over the past 3 years as a means to improve the historically abysmal dental readiness of the Army Reserve Component (RC). Dental readiness is essential for sustaining an Army RC Operational Force. ASDRS is a tool for RC commanders to provide contract dental readiness care in support of over 558 thousand nonmobilized Selected Reserve Citizen-Soldiers dispersed throughout the 54 states and U.S. territories, at home station before alert, and if necessary after alert (throughout the Army force generation cycle). This article examines the status of ASDRS implementation, assesses its effectiveness in improving Army RC Dental Readiness, and provides Army leadership recommendations regarding the following focus areas: (1) command emphasis, (2) program execution, and (3) synergy with the Military Health System and Department of Veterans Affairs. Reprint & Copyright © 2013 Association of Military Surgeons of the U.S.

  18. Maximum currents in the Northeast Corridor Reserve during November 2013.

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A 2D numerical model, CMS-Flow, was implemented for the Northeast Corridor Reserve (NECR) using a telescoping grid. Tide and wind forcing was provided to the model...

  19. Significance of force transfer in mitral valve-left ventricular interaction: in vivo assessment.

    Science.gov (United States)

    Askov, Jesper B; Honge, Jesper L; Jensen, Morten O; Nygaard, Hans; Hasenkam, J Michael; Nielsen, Sten L

    2013-06-01

    The objective of this study was to assess the combined force transfer from the papillary muscle tips to the mitral valve through the chordae tendineae in vivo, and thereby quantify the force transmitted through the papillary-chordal complex to augment left ventricular ejection. In an acute porcine model (n = 8), force transfer between papillary muscles and the mitral valve was recorded on the anterior and posterior papillary muscle tip using dedicated force transducers. Ultrasound sonomicrometry was utilized to record and calculate left ventricular long-axis shortening and mitral annular geometry. The closing force acting on the mitral valve leaflets was calculated as mitral annular area multiplied by the transmitral pressure difference throughout systole. Mitral valve competence was verified before measurements with color Doppler ultrasound. Peak force in the anterior and posterior papillary muscle was 5.9 ± 0.6 N and 5.8 ± 0.7 N (mean ± standard error of the mean), respectively, and peak closing force was 6.8 ± 0.3 N all at a transmitral pressure of 90 mm Hg. Peak rate of left ventricular contraction coincided with peak papillary muscle force. This study is the first to assess the magnitude and time course of the longitudinal force transmitted through the papillary-chordal complex to the left ventricular wall during ejection. The study also demonstrates a significant force transfer to the closing force acting on the mitral valve leaflets that constitutes an essential component of valvular-ventricular interaction to enhance left ventricular systolic pump performance. The magnitude of the combined papillary muscle force component emphasizes the crucial role of preserving mitral valve-left ventricular continuity in mitral valve surgery. Copyright © 2013 The American Association for Thoracic Surgery. Published by Mosby, Inc. All rights reserved.

  20. Cluster forcing

    DEFF Research Database (Denmark)

    Christensen, Thomas Budde

    , Portugal and New Zealand have adopted the concept. Public sector interventions that aim to support cluster development in industries most often focus upon economic policy goals such as enhanced employment and improved productivity, but rarely emphasise broader societal policy goals relating to e.......g. sustainability or quality of life. The purpose of this paper is to explore how and to what extent public sector interventions that aim at forcing cluster development in industries can support sustainable development as defined in the Brundtland tradition and more recently elaborated in such concepts as eco...... in 2000 by the Welsh Automotive Task Force under the Welsh Assembly Government. The Accelerate programme takes basically different two directions: The first one, which was the first to be launched, is concerned with the upgrading of existing supply chains in the automotive industry in Wales. The programme...

  1. Reserve valuation in electric power systems

    Science.gov (United States)

    Ruiz, Pablo Ariel

    Operational reliability is provided in part by scheduling capacity in excess of the load forecast. This reserve capacity balances the uncertain power demand with the supply in real time and provides for equipment outages. Traditionally, reserve scheduling has been ensured by enforcing reserve requirements in the operations planning. An alternate approach is to employ a stochastic formulation, which allows the explicit modeling of the sources of uncertainty. This thesis compares stochastic and reserve methods and evaluates the benefits of a combined approach for the efficient management of uncertainty in the unit commitment problem. Numerical studies show that the unit commitment solutions obtained for the combined approach are robust and superior with respect to the traditional approach. These robust solutions are especially valuable in areas with a high proportion of wind power, as their built-in flexibility allows the dispatch of practically all the available wind power while minimizing the costs of operation. The scheduled reserve has an economic value since it reduces the outage costs. In several electricity markets, reserve demand functions have been implemented to take into account the value of reserve in the market clearing process. These often take the form of a step-down function at the reserve requirement level, and as such they may not appropriately represent the reserve value. The value of reserve is impacted by the reliability, dynamic and stochastic characteristics of system components, the system operation policies, and the economic aspects such as the risk preferences of the demand. In this thesis, these aspects are taken into account to approximate the reserve value and construct reserve demand functions. Illustrative examples show that the demand functions constructed have similarities with those implemented in some markets.

  2. Unsteady hydrodynamic forces acting on a robotic hand and its flow field.

    Science.gov (United States)

    Takagi, Hideki; Nakashima, Motomu; Ozaki, Takashi; Matsuuchi, Kazuo

    2013-07-26

    This study aims to clarify the mechanism of generating unsteady hydrodynamic forces acting on a hand during swimming in order to directly measure the forces, pressure distribution, and flow field around the hand by using a robotic arm and particle image velocimetry (PIV). The robotic arm consisted of the trunk, shoulder, upper arm, forearm, and hand, and it was independently computer controllable in five degrees of freedom. The elbow-joint angle of the robotic arm was fixed at 90°, and the arm was moved in semicircles around the shoulder joint in a plane perpendicular to the water surface. Two-component PIV was used for flow visualization around the hand. The data of the forces and pressure acting on the hand were sampled at 200Hz and stored on a PC. When the maximum resultant force acting on the hand was observed, a pair of counter-rotating vortices appeared on the dorsal surface of the hand. A vortex attached to the hand increased the flow velocity, which led to decreased surface pressure, increasing the hydrodynamic forces. This phenomenon is known as the unsteady mechanism of force generation. We found that the drag force was 72% greater and the lift force was 4.8 times greater than the values estimated under steady flow conditions. Therefore, it is presumable that swimmers receive the benefits of this unsteady hydrodynamic force. Copyright © 2013 Elsevier Ltd. All rights reserved.

  3. Development of standard components for remote handling

    Energy Technology Data Exchange (ETDEWEB)

    Taguchi, Kou; Kakudate, Satoshi; Nakahira, Masataka; Ito, Akira [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-04-01

    The core of Fusion Experimental Reactor consists of various components such as superconducting magnets and forced-cooled in-vessel components, which are remotely maintained due to intense of gamma radiation. Mechanical connectors such as cooling pipe connections, insulation joints and electrical connectors are commonly used for maintenance of these components and have to be standardized in terms of remote handling. This paper describes these mechanical connectors developed as the standard component compatible with remote handling and tolerable for radiation. (author)

  4. Thermochemical nanolithography components, systems, and methods

    Science.gov (United States)

    Riedo, Elisa; Marder, Seth R.; de Heer, Walt A.; Szoskiewicz, Robert J.; Kodali, Vamsi K.; Jones, Simon C.; Okada, Takashi; Wang, Debin; Curtis, Jennifer E.; Henderson, Clifford L.; Hua, Yueming

    2013-06-18

    Improved nanolithography components, systems, and methods are described herein. The systems and methods generally employ a resistively heated atomic force microscope tip to thermally induce a chemical change in a surface. In addition, certain polymeric compositions are also disclosed.

  5. Surface mount component jig

    Science.gov (United States)

    Kronberg, James W.

    1990-08-07

    A device for bending and trimming the pins of a dual-inline-package component and the like for surface mounting rather than through mounting to a circuit board comprises, in a first part, in pin cutter astride a holder having a recess for holding the component, a first spring therebetween, and, in a second part, two flat members pivotally interconnected by a hinge and urged to an upward peaked position from a downward peaked position by a second spring. As a downward force is applied to the pin cutter it urges the holder downward, assisted by the first spring and a pair of ridges riding on shoulders of the holder, to carry the component against the upward peaked flat members which guide the pins outwardly. As the holder continues downwardly, the flat members pivot to the downward peaked position bending the pins upwardly against the sides of the holder. When the downward movement is met with sufficient resistance, the ridges of the pin cutter ride over the holder's shoulders to continue downward to cut any excess length of pin.

  6. Coriolis Force

    Science.gov (United States)

    Marciuc, Daly; Solschi, Viorel

    2017-04-01

    Understanding the Coriolis effect is essential for explaining the movement of air masses and ocean currents. The lesson we propose aims to familiarize students with the manifestation of the Coriolis effect. Students are guided to build, using the GeoGebra software, a simulation of the motion of a body, related to a rotating reference system. The mathematical expression of the Coriolis force is deduced, for particular cases, and the Foucault's pendulum is presented and explained. Students have the opportunity to deepen the subject, by developing materials related to topics such as: • Global Wind Pattern • Ocean Currents • Coriolis Effect in Long Range Shooting • Finding the latitude with a Foucault Pendulum

  7. Joining Forces

    DEFF Research Database (Denmark)

    Christiansen, Anne Mette

    2013-01-01

    The interest in Corporate Social Responsibility (CSR) has grown dramatically over the last three years in Greenland. A vast geographical area with a tiny population, Greenland has recently obtained self-government status and is going through a rapid development economically and socially...... as the country moves towards embracing extractive industries (oil, gas and mining) as a path to development. Both government, civil society and business are increasingly looking for new and innovative ways of joining forces across sectors to solve some of the country's many critical social issues. Greenlandic...... companies have over the last 23 years embraced the concept of strategic CSR and are increasingly engaging in cross-sector partnerships as part of their CSR strategy. The partnerships take different forms both in regards to number of partners, focus areas and level of strategic engagement. In the article...

  8. Estrutura do componente arbustivo-arbóreo de dois estádios sucessionais de floresta estacional semidecidual na Reserva Florestal Mata do Paraíso, Viçosa, MG, Brasil Structure of the tree-shrub component in two successional stages of semideciduous forest in the Mata do Paraíso Forest Reserve, Viçosa, MG, Brazil

    Directory of Open Access Journals (Sweden)

    Sheila Isabel do Carmo Pinto

    2007-10-01

    Full Text Available Realizou-se o estudo das variações estruturais do componente arbustivo- arbóreo em dois estádios sucessionais - inicial e madura - de Floresta Estacional Semidecidual, na Reserva Florestal Mata do Paraíso, em Viçosa, MG, Brasil. A Reserva Florestal está situada nas coordenadas 20º45'S e 42º55'W e a uma altitude média de 689 m. O clima da região é classificado como Cwb pelo sistema de Köppen. As espécies arbustivo-arbóreas foram amostradas dentro de 20 parcelas de 10 x 30 m, sendo 10 parcelas em cada estádio sucessional, sendo considerados apenas os indivíduos com diâmetro a 1,30 m do solo (DAP > 4,8 cm. Na floresta inicial foram amostrados 399 indivíduos, distribuídos em 27 famílias e 55 espécies. As espécies com maior valor de importância (VI foram Piptadenia gonoacantha, Vernonanthura diffusa, Miconia cinnamomifolia, Piptocarpha macropoda e Luehea grandiflora. O índice de diversidade de Shannon (H' foi de 3,31 nat.ind.-1 e a equabilidade de Pielou (J', igual a 0,83. No estádio floresta madura foram amostrados 623 indivíduos, distribuídos em 31 famílias e 78 espécies. As espécies com maior valor de importância (VI foram Euterpe edulis, Piptadenia gonoacantha, Nectandra lanceolata, Myrcia sphaerocarpa e Guapira opposita. O índice de diversidade de Shannon (H' foi de 3,46 nat.ind.-1 e a equabilidade de Pielou (J', igual a 0,79. As distribuições diamétricas das quatro espécies mais abundantes em cada estádio sucessional apresentaram padrões distintos, aparentemente relacionados ao estádio sucessional.The study of the floristic and structural variations of the tree-shrub component was carried out in two successional stages of Semideciduous Forest, initial and mature, located in the Mata do Paraíso Forest Reserve, in Viçosa, Minas Gerais State, Brazil. The Forest Reserve is located at 20º45'S and 42º55'W, with average altitude of 689 m. The regional climate is classified as Cwb by the Köppen system

  9. Suicides and suicide attempts among active component members of the U.S. Armed Forces, 2010-2012; methods of self-harm vary by major geographic region of assignment.

    Science.gov (United States)

    Corr, William P

    2014-10-01

    This report analyzed data from the Department of Defense Suicide Event Report program about suicide events (suicide attempts and suicides) among active component service members during 2010-2012. Most attempts (85.2%) and suicides (83.5%) occurred among service members stationed in the U.S. Drugs were identified as the method of self-harm in 54.8% of attempts but in only 3.6% of suicides. Firearms were the leading method of suicide in both the U.S. and combat zones (61.1% and 97.2%, respectively) but accounted for only 5.4% of suicides in those stationed in Europe/Asia. Hanging/asphyxiation (22.9% overall) was the second most common method in suicides. For suicides using firearms, the rates of suicide and the types of firearm used varied according to service members' geographically related access to firearms. Challenges to reducing the frequency of service member suicides by firearms are discussed.

  10. Redmedial Action Plan for the Risk-Based Remediation of Site ST14 (SWMU 68), LPSTID 104819; the Former Base Refueling Area (A0C7); the French Underdrain System (SWMU 64); and the North Oil/Water Separator (SWMU 67), Carswell Air Force Base, Naval Air Station Fort Worth Joint Reserve Base, Texas. Volume 1: Report

    National Research Council Canada - National Science Library

    1997-01-01

    ...) to prepare a remedial action plan (RAP) in support of a risk-based remediation decision for soil and groundwater contaminated with fuel hydrocarbons at Site ST14 at Carswell Air Force Base (AFB), Texas...

  11. Fractional Reserve in Banking System

    OpenAIRE

    Valkonen, Maria

    2016-01-01

    This thesis is aimed to provide understanding of the role of the fractional reserve in the mod-ern banking system worldwide and particularly in Finland. The fractional reserve banking is used worldwide, but the benefits of this system are very disputable. On the one hand, experts say that the fractional reserve is a necessary instrument for the normal business and profit making. On the other hand, sceptics openly criticize the fractional reserve system and blame it for fiat money (money n...

  12. Impedance and component heating

    CERN Document Server

    Métral, E; Mounet, N; Pieloni, T; Salvant, B

    2015-01-01

    The impedance is a complex function of frequency, which represents, for the plane under consideration (longitudinal, horizontal or vertical), the force integrated over the length of an element, from a “source” to a “test” wave, normalized by their charges. In general, the impedance in a given plane is a nonlinear function of the test and source transverse coordinates, but it is most of the time sufficient to consider only the first few linear terms. Impedances can influence the motion of trailing particles, in the longitudinal and in one or both transverse directions, leading to energy loss, beam instabilities, or producing undesirable secondary effects such as excessive heating of sensitive components at or near the chamber wall, called beam-induced RF heating. The LHC performance limitations linked to impedances encountered during the 2010-2012 run are reviewed and the currently expected situation during the HL-LHC era is discussed.

  13. Automotive component failures

    CSIR Research Space (South Africa)

    Heyes, AM

    1998-06-01

    Full Text Available [ However\\ in the presence of a stress concentration the ultimate tensile stress can be exceeded before the ultimate shear stress is reached\\ resulting in a tensile failure 0 [ 2[6[ Metallo`raphy and Ener`y Dispersive Spectroscopy "EDS# A microspecimen...\\ Vol[ 4\\ No[ 1\\ pp[ 018 030\\ 0887 0887 Elsevier Science Ltd[ All rights reserved\\ Pergamon Printed in Great Britain 0249 5296:87 ,08[99 9[99 PII] S0249 5296"87#99909 6 AUTOMOTIVE COMPONENT FAILURES A[ M[ HEYES Advanced Engineering and Testing...

  14. Research on the parallel load sharing principle of a novel self-decoupled piezoelectric six-dimensional force sensor.

    Science.gov (United States)

    Li, Ying-Jun; Yang, Cong; Wang, Gui-Cong; Zhang, Hui; Cui, Huan-Yong; Zhang, Yong-Liang

    2017-09-01

    This paper presents a novel integrated piezoelectric six-dimensional force sensor which can realize dynamic measurement of multi-dimensional space load. Firstly, the composition of the sensor, the spatial layout of force-sensitive components, and measurement principle are analyzed and designed. There is no interference of piezoelectric six-dimensional force sensor in theoretical analysis. Based on the principle of actual work and deformation compatibility coherence, this paper deduces the parallel load sharing principle of the piezoelectric six-dimensional force sensor. The main effect factors which affect the load sharing ratio are obtained. The finite element model of the piezoelectric six-dimensional force sensor is established. In order to verify the load sharing principle of the sensor, a load sharing test device of piezoelectric force sensor is designed and fabricated. The load sharing experimental platform is set up. The experimental results are in accordance with the theoretical analysis and simulation results. The experiments show that the multi-dimensional and heavy force measurement can be realized by the parallel arrangement of the load sharing ring and the force sensitive element in the novel integrated piezoelectric six-dimensional force sensor. The ideal load sharing effect of the sensor can be achieved by appropriate size parameters. This paper has an important guide for the design of the force measuring device according to the load sharing mode. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

  15. Biosphere reserves: Attributes for success.

    Science.gov (United States)

    Van Cuong, Chu; Dart, Peter; Hockings, Marc

    2017-03-01

    Biosphere reserves established under the UNESCO Man and the Biosphere Program aim to harmonise biodiversity conservation and sustainable development. Concerns over the extent to which the reserve network was living up to this ideal led to the development of a new strategy in 1995 (the Seville Strategy) to enhance the operation of the network of reserves. An evaluation of effectiveness of management of the biosphere reserve network was called for as part of this strategy. Expert opinion was assembled through a Delphi Process to identify successful and less successful reserves and investigate common factors influencing success or failure. Ninety biosphere reserves including sixty successful and thirty less successful reserves in 42 countries across all five Man and the Biosphere Program regions were identified. Most successful sites are the post-Seville generation while the majority of unsuccessful sites are pre-Seville that are managed as national parks and have not been amended to conform to the characteristics that are meant to define a biosphere reserve. Stakeholder participation and collaboration, governance, finance and resources, management, and awareness and communication are the most influential factors in the success or failure of the biosphere reserves. For success, the biosphere reserve concept needs to be clearly understood and applied through landscape zoning. Designated reserves then need a management system with inclusive good governance, strong participation and collaboration, adequate finance and human resource allocation and stable and responsible management and implementation. All rather obvious but it is difficult to achieve without commitment to the biosphere reserve concept by the governance authorities. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Nuclear, uranium, reserves, sustainability, independence; Nucleaire, Uranium, reserves, durabilite, independance

    Energy Technology Data Exchange (ETDEWEB)

    Acket, C

    2007-06-15

    In order to evaluate the energy independence concerning the nuclear energy, the author takes the state of the art about the uranium. He details the fuel needs, the reserves on the base of the today available techniques, the reserves on the base of the future techniques and concludes positively on the energy independence for the nuclear. (A.L.B.)

  17. Machining characteristics of the haversian and plexiform components of bovine cortical bone.

    Science.gov (United States)

    Conward, Michael; Samuel, Johnson

    2016-07-01

    This paper investigates the characteristic differences observed while machining the haversian and plexiform components of a bovine cortical femoral bone. To this end micro-milling slotting experiments are performed on both the components by varying both the cutting velocity and the feed-per-tooth values. The scale of machining is chosen specifically to ensure sensitivity to the microstructural variations in the bone. The material properties of the microstructural components and their size-scale relative to the feed-per-tooth values are seen to dictate the failure mechanisms encountered during machining. The cutting force, surface roughness, and tool wear are all uniquely affected by the plexiform and haversian components of the cortical bone. In general, plexiform bone requires a higher cutting force than the haversian bone. While a higher cutting velocity can lower the surface roughness of haversian bone, it typically results in the most surface damage. The cutting force and surface roughness values for both the components show strain rate sensitivity. The tool wear is seen to be the highest while cutting parallel to the lamellar structures seen in the plexiform bone. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Static magnetic forces and torques in ATLAS

    International Nuclear Information System (INIS)

    Morozov, N.A.; Samsonov, E.V.; Vorozhtsov, S.B.

    1998-01-01

    The magnetic forces acting on the various metallic objects around the ATLAS detector, are the subject of the given paper. A system designer could use the information on global forces and torque acting on various components, obtained in this report, to optimize them. The results of force calculations could also serve as additional criteria for the replacement of the magnetic baseline material of various structures by nonmagnetic ones

  19. Reducing Air Force Fighter Pilot Shortages

    Science.gov (United States)

    2015-12-31

    component to fill inventory requirements in another. The inventory conservation equation at the heart of the model takes the following form: ...requirement by about a third. The next three largest staffs, Pacific Air Forces (PACAF), Air Force Secretariat and Headquarters (SAF/HAF), and

  20. Youth Problems on Indian Reservations.

    Science.gov (United States)

    Underhill, Ruth M., Ed.

    Juvenile delinquency was identified as the major problem affecting youth on Indian reservations. Causes for delinquency which were discussed included culture conflict, expectation of failure, unemployment, failure of homes and parents, discrimination, inadequate education, off-reservation schools, and alcoholism. Needs identified by tribal leaders…

  1. Can Creativity Predict Cognitive Reserve?

    Science.gov (United States)

    Palmiero, Massimiliano; Di Giacomo, Dina; Passafiume, Domenico

    2016-01-01

    Cognitive reserve relies on the ability to effectively cope with aging and brain damage by using alternate processes to approach tasks when standard approaches are no longer available. In this study, the issue if creativity can predict cognitive reserve has been explored. Forty participants (mean age: 61 years) filled out: the Cognitive Reserve…

  2. Reserve Officer Commissioning Program (ROCP) Officer and Reserve Personnel Readiness

    Science.gov (United States)

    2017-04-07

    Women in the Armed Forces. [13] Becker , Sasha O., and Andrea Inchino. 2002. “Estimation of Average Treatment Effects Based on Propensity Scores.” The...service officers into the SMCR. This study looks at the performance of the ROCP candidates and their effect on SMCR personnel readiness. We find that...created to recruit non-prior-service officers into the SMCR. This study looks at the performance of the ROCP candidates and their effect on SMCR

  3. Effects of varying the load force range and frequency on force coordination in static manipulation.

    Science.gov (United States)

    Uygur, Mehmet; de Freitas, Paulo B; Jaric, Slobodan

    2010-05-14

    A frequency associated deterioration of the hand grip (GF; normal component of force acting at the digits-object contact area) and load force (LF; the tangential component) coordination has been demonstrated in a variety of repetitive manipulation tasks. However, it remains unknown whether the effect originates from the task frequency per se, or from the rate of LF change (a prediction that could be derived from the minimum jerk hypothesis) which increases with both LF frequency and LF range. The aim of the study was to discern between the effects of LF frequency and LF range (which affects only the rate of LF) in static manipulation tasks. Subjects (N=15) exerted a sinusoidal LF pattern against an externally fixed instrumented handle at 5 different LF frequencies (0.67-3.33Hz) and ranges (6-30N). The results revealed weak and mainly non-significant effects of both LF range and frequency on GF scaling (GF/LF ratio). However, both GF-LF coupling (assessed by correlation coefficients) and GF modulation (change in GF relative to LF variation) demonstrated a prominent decrease associated with LF frequency, but not with LF range. The observed findings were interpreted by switching between hypothetical synergies of GF and LF producing muscles separately employed in the phases of the increasing and decreasing forces. From the practical aspect, however, the results suggest that the frequency, but not the LF range should be taken into account when designing rhythmic manipulation tasks, developing standard tests of hand function based on GF-LF coordination, or comparing the data from different studies. Copyright 2010 Elsevier Ireland Ltd. All rights reserved.

  4. Reshaping the All-Volunteer Force of the United States to Increase its Utility: A Reassessment of Over Forty Years of Experience

    Science.gov (United States)

    2015-05-23

    buying American flags after 9/11. But there was no surge of people rushing in saying they wanted to join the Army.’”107 Still, according to...disadvantages of using compulsion to bring into the armed forces the 119 The discussion about...a large-scale mobilization of the reserves. The reserves would also be used to “ buy time to increase the size of the active component,” and because

  5. Versatile Fiber Optic 6-Component Force Measurement System, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — The mission of NASA's ATP is to maintain and advance the testing capabilities of the United States' extensive infrastructure of aerospace research facilities. One...

  6. Understanding Country Planning: A Guide for Air Force Component Planners

    Science.gov (United States)

    2012-01-01

    on an early draft of this report, in particular Gene Moty and Aaron Taliferro. We are deeply grateful to David Thaler and Gen (ret.) Bob Elder for...example, Jefferson P. Marquis, Richard E. Darilek, Jasen J. Castillo, Cathryn Quantic Thurston, Anny Wong, Cynthia Huger, Andrea Mejia, Jennifer D. P...Collaborative Intelligence,” Public Manager, Vol. 39, No. 1, Spring 2010, pp. 20–26. Marquis, Jefferson P., Richard E. Darilek, Jasen J. Castillo, Cathryn

  7. Versatile Fiber Optic 6-Component Force Measurement System, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — The mission of NASA's ATP is to maintain and advance the testing capabilities of the United States' extensive infrastructure of aerospace research facilities. One...

  8. The Role of the Electrostatic Force in Spore Adhesion

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Eunhyea [Georgia Institute of Technology; Yiacoumi, Sotira [Georgia Institute of Technology; Lee, Ida [University of Tennessee, Knoxville (UTK); Tsouris, Costas [ORNL

    2010-01-01

    Electrostatic force is investigated as one of the components of the adhesion force between Bacillus thuringiensis (Bt) spores and planar surfaces. The surface potentials of a Bt spore and a mica surface are experimentally obtained using a combined atomic force microscopy (AFM)-scanning surface potential microscopy technique. On the basis of experimental information, the surface charge density of the spores is estimated at 0.03 {micro}C/cm{sup 2} at 20% relative humidity and decreases with increasing humidity. The Coulombic force is introduced for the spore-mica system (both charged, nonconductive surfaces), and an electrostatic image force is introduced to the spore-gold system because gold is electrically conductive. The Coulombic force for spore-mica is repulsive because the components are similarly charged, while the image force for the spore-gold system is attractive. The magnitude of both forces decreases with increasing humidity. The electrostatic forces are added to other force components, e.g., van der Waals and capillary forces, to obtain the adhesion force for each system. The adhesion forces measured by AFM are compared to the estimated values. It is shown that the electrostatic (Coulombic and image) forces play a significant role in the adhesion force between spores and planar surfaces.

  9. Estimating Foreign Exchange Reserve Adequacy

    Directory of Open Access Journals (Sweden)

    Abdul Hakim

    2013-04-01

    Full Text Available Accumulating foreign exchange reserves, despite their cost and their impacts on other macroeconomics variables, provides some benefits. This paper models such foreign exchange reserves. To measure the adequacy of foreign exchange reserves for import, it uses total reserves-to-import ratio (TRM. The chosen independent variables are gross domestic product growth, exchange rates, opportunity cost, and a dummy variable separating the pre and post 1997 Asian financial crisis. To estimate the risky TRM value, this paper uses conditional Value-at-Risk (VaR, with the help of Glosten-Jagannathan-Runkle (GJR model to estimate the conditional volatility. The results suggest that all independent variables significantly influence TRM. They also suggest that the short and long run volatilities are evident, with the additional evidence of asymmetric effects of negative and positive past shocks. The VaR, which are calculated assuming both normal and t distributions, provide similar results, namely violations in 2005 and 2008.

  10. Cognitive Reserve Scale and ageing

    Directory of Open Access Journals (Sweden)

    Irene León

    2016-01-01

    Full Text Available The construct of cognitive reserve attempts to explain why some individuals with brain impairment, and some people during normal ageing, can solve cognitive tasks better than expected. This study aimed to estimate cognitive reserve in a healthy sample of people aged 65 years and over, with special attention to its influence on cognitive performance. For this purpose, it used the Cognitive Reserve Scale (CRS and a neuropsychological battery that included tests of attention and memory. The results revealed that women obtained higher total CRS raw scores than men. Moreover, the CRS predicted the learning curve, short-term and long-term memory, but not attentional and working memory performance. Thus, the CRS offers a new proxy of cognitive reserve based on cognitively stimulating activities performed by healthy elderly people. Following an active lifestyle throughout life was associated with better intellectual performance and positive effects on relevant aspects of quality of life.

  11. Fractional Reserve Banking: Some Quibbles

    OpenAIRE

    Bagus, Philipp; Howden, David

    2010-01-01

    We explore several unaddressed issues in George Selgin’s (1988) claim that the best monetary system to maintain monetary equilibrium is a fractional reserve free banking one. The claim that adverse clearing balances would limit credit expansion in a fractional reserve free banking system is more troublesome than previously reckoned. Both lengthened clearing periods and interbank agreements render credit expansion unrestrained. “The theory of free banking” confuses increases in money held with...

  12. 32 CFR 728.23 - Reserve Officers' Training Corps (ROTC).

    Science.gov (United States)

    2010-07-01

    ... observation, including participation in service-sponsored sports, recreational, and training activities. (ii... 32 National Defense 5 2010-07-01 2010-07-01 false Reserve Officers' Training Corps (ROTC). 728.23... Components, Reserve Officers' Training Corps, Navy and Marine Corps Officer Candidate Programs, and National...

  13. Rotary ultrasonic machining of CFRP: a mechanistic predictive model for cutting force.

    Science.gov (United States)

    Cong, W L; Pei, Z J; Sun, X; Zhang, C L

    2014-02-01

    Cutting force is one of the most important output variables in rotary ultrasonic machining (RUM) of carbon fiber reinforced plastic (CFRP) composites. Many experimental investigations on cutting force in RUM of CFRP have been reported. However, in the literature, there are no cutting force models for RUM of CFRP. This paper develops a mechanistic predictive model for cutting force in RUM of CFRP. The material removal mechanism of CFRP in RUM has been analyzed first. The model is based on the assumption that brittle fracture is the dominant mode of material removal. CFRP micromechanical analysis has been conducted to represent CFRP as an equivalent homogeneous material to obtain the mechanical properties of CFRP from its components. Based on this model, relationships between input variables (including ultrasonic vibration amplitude, tool rotation speed, feedrate, abrasive size, and abrasive concentration) and cutting force can be predicted. The relationships between input variables and important intermediate variables (indentation depth, effective contact time, and maximum impact force of single abrasive grain) have been investigated to explain predicted trends of cutting force. Experiments are conducted to verify the model, and experimental results agree well with predicted trends from this model. Copyright © 2013 Elsevier B.V. All rights reserved.

  14. A new bi-axial cantilever beam design for biomechanics force measurements.

    Science.gov (United States)

    Lin, Huai-Ti; Trimmer, Barry A

    2012-08-31

    The demand for measuring forces exerted by animals during locomotion has increased dramatically as biomechanists strive to understand and implement biomechanical control strategies. In particular, multi-axial force transducers are often required to capture animal limb coordination patterns. Most existing force transducers employ strain gages arranged in a Wheatstone bridge on a cantilever beam. Bi-axial measurements require duplicating this arrangement in the transverse direction. In this paper, we reveal a method to embed a Wheatstone bridge inside another to allow bi-axial measurements without additional strain gages or additional second beams. This hybrid configuration resolves two force components from a single bridge circuit and simplifies fabrication for the simultaneous assessment of normal and transverse loads. This design can be implemented with two-dimensional fabrication techniques and can even be used to modify a common full bridge cantilever force transducer. As a demonstration of the new design, we built a simple beam which achieved bi-axial sensing capability that outperformed a conventional half-bridge-per-axis bi-axial strain gage design. We have used this design to measure the ground reaction forces of a crawling caterpillar and a caterpillar-mimicking soft robot. The simplicity and increased sensitivity of this method could facilitate bi-axial force measurements for experimental biologists. Copyright © 2012 Elsevier Ltd. All rights reserved.

  15. Reserve Retirement Equality: Treating Reserves Fairly While Saving Taxpayer Dollars

    Science.gov (United States)

    2010-06-09

    rata .121 For example, a Reserve who performs the equivalent of five years of active duty, will receive one-fourth the retired pay of his active duty...4,225 per month.124 But because reserve-retirement benefits are based on pro rata years of service, this officer’s years of service for retirement...purposes are 3,146 retirement points divided by 360.125 This results in 8.74 years pro rata years of service.126 His retirement benefits thus are

  16. Demand as frequency controlled reserve

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Z.; Togeby, M.; OEstergaard, J.

    2008-09-15

    Using demand as frequency controlled reserve (DFR) is an emerging technology which allow demand to participate actively in maintaining the system operation without reducing the energy service delivered to the customer and without need of user interaction. The basic premise is that traditional frequency controlled reserves from power plants and interconnections with neighbouring systems can be costly, slow and not fulfil the need for future power grids with a high share of wind power and fewer central power plants, and an intention to perform flexible operation such as is landing. Electricity demands, on the other hand, have advantages as frequency reserve including fast activation speed, smooth linear activation, low expected costs, and well-dispersed in the distribution grid. The main challenge of DFR is new methods for monitoring the available capacity. This project has investigated the technology of using electricity demands for providing frequency reserve to power systems. Within the project the potential and economy of DFR compatible loads in Denmark has been investigated, control logic has been designed, power system impact has been investigated, potential business models has been evaluated and an implementation strategy has been suggested. The tasks and goals of the project have been successfully accomplished based on which the conclusion and future recommendation are made. This project has developed the DFR technology that enables electricity demands to autonomously disconnect or reconnect to the grid in response to system frequency variations. The developed DFR technology is proved to be a promising technology from several perspectives. Technically, using DFR is feasible to provide reserves and enhance power system frequency control, while fulfilling technical requirements such as linear activation (or reconnection) according to frequency (or time). Environmentally, the DFR technology is pollution free in contrast to traditional reserves from generation

  17. Spinning Reserve From Responsive Loads

    Energy Technology Data Exchange (ETDEWEB)

    Kirby, B.J.

    2003-04-08

    Responsive load is the most underutilized reliability resource available to the power system today. It is currently not used at all to provide spinning reserve. Historically there were good reasons for this, but recent technological advances in communications and controls have provided new capabilities and eliminated many of the old obstacles. North American Electric Reliability Council (NERC), Federal Energy Regulatory Commission (FERC), Northeast Power Coordinating Council (NPCC), New York State Reliability Council (NYSRC), and New York Independent System Operator (NYISO) rules are beginning to recognize these changes and are starting to encourage responsive load provision of reliability services. The Carrier ComfortChoice responsive thermostats provide an example of these technological advances. This is a technology aimed at reducing summer peak demand through central control of residential and small commercial air-conditioning loads. It is being utilized by Long Island Power Authority (LIPA), Consolidated Edison (ConEd), Southern California Edison (SCE), and San Diego Gas and Electric (SDG&E). The technology is capable of delivering even greater response in the faster spinning reserve time frame (while still providing peak reduction). Analysis of demand reduction testing results from LIPA during the summer of 2002 provides evidence to back up this claim. It also demonstrates that loads are different from generators and that the conventional wisdom, which advocates for starting with large loads as better ancillary service providers, is flawed. The tempting approach of incrementally adapting ancillary service requirements, which were established when generators were the only available resources, will not work. While it is easier for most generators to provide replacement power and non-spinning reserve (the slower response services) than it is to supply spinning reserve (the fastest service), the opposite is true for many loads. Also, there is more financial

  18. Cerebral correlates of cognitive reserve.

    Science.gov (United States)

    Whalley, Lawrence J; Staff, Roger T; Fox, Helen C; Murray, Alison D

    2016-01-30

    Cognitive reserve is a hypothetical concept introduced to explain discrepancies between severity of clinical dementia syndromes and the extent of dementia pathology. We examined cognitive reserve in a research programme that followed up a non-clinical sample born in 1921 or 1936 and IQ-tested age 11 years in 1932 or 1947. Structural MRI exams were acquired in about 50% of the sample from whom a subsample were recruited into an additional fMRI study. Here, we summarise findings from seven inter-related studies. These support an understanding of cognitive reserve as a balance between positive life course activity-driven experiences and the negative effects of brain pathologies including cerebrovascular disease and total and regional brain volume loss. Hypothesised structural equation models illustrate the relative causal effects of these positive and negative contributions. Cognitive reserve is considered in the context of choice of interventions to prevent dementia and the opposing effects of cerebrovascular disease and Alzheimer like brain appearances. Crown Copyright © 2015. Published by Elsevier Ireland Ltd. All rights reserved.

  19. Extractive reserves in Brazilian Amazonia

    Energy Technology Data Exchange (ETDEWEB)

    Fearnside, P.M (National Institute for Research in the Amazon, Manaus-Amazonas (Brazil))

    1989-06-01

    In 1985 an opportunity arose for maintaining tracts of Amazonian forest under sustainable use. Brazil's National Council of Rubber Tappers and the Rural Worker's Union proposed the creation of a set of reserves of a new type, called extractive reserves. The first six are being established in one of the Brazilian states most threatened by deforestatation. The creation of extractive reserves grants legal protection to forest land traditionally used by rubber tappers, Brazil-nut gatherers, and other extractivists. The term extrativismo (extractivism) in Brazil refers to removing nontimber forest products, such as latex, resins, and nuts, without felling the trees. Approximately 30 products are collected for commercial sale. Many more types of forest materials are gathered, for example as food and medicines, for the extractivists' own use. The reserve proposal is attractive for several reasons related to social problems. It allows the rubber tappers to continue their livelihood rather than be expelled by deforestation. However, it is unlikely that sufficient land will be set aside as extractive reserves to employ all the tappers. Displaced rubber tappers already swell the ranks of urban slum dwellers in Brazil's Amazonian cities, and they have become refugees to continue their profession in the forests of neighboring countries, such as Bolivia.

  20. Hydrocarbon Reserves: Abundance or Scarcity

    International Nuclear Information System (INIS)

    2005-01-01

    IFP and the OAPEC jointly organize a regular international seminar dealing with world oil-related problems appearing in the news. For the first time, this seminar has been opened to oil and gas company specialists, service companies, research centers and independents. This year's theme concerns oil and gas reserves: are they abundant or are we headed towards the shortages announced by some experts? This theme is especially topical in that: oil and gas currently meet two thirds of world energy needs and almost completely dominate the transport sector; the reserves declared by the OAPEC countries account for nearly half of world reserves; the price of a barrel of oil went through the roof in 2004; world energy demand is growing fast and alternative sources of energy are far from ready to take over from oil and gas in the next few decades. Since the reserves correspond to the volume it is technically and economically viable to produce, the seminar has, of course, dealt with the technical and economic questions that arise in connection with exploration and production, but it has also considered changes in the geopolitical context. Presentations by the leading companies of the OAPEC countries and by the IFP group were completed by presentation from the International Energy Agency (IEA), the United States Geological Survey (USGS), the IHS Energy Group, Total and Gaz de France. This document gathers the transparencies of the following presentations: Hydrocarbon reserves in OAPEC members countries: current and future (M. Al-Lababidi); Non OAPEC liquid reserves and production forecasts (Y. Mathieu); World oil and gas resources and production outlook (K. Chew); Global investments in the upstream (F. Birol); Total's policy in the oil and gas sector (C. de Margerie); Gaz de France's policy in the oil and gas sector (J. Abiteboul); NOC/IOC's opportunities in OPEC countries (I. Sandrea); Relationships between companies, countries and investors: How they may impact on the growth

  1. Hydrocarbon Reserves: Abundance or Scarcity

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    IFP and the OAPEC jointly organize a regular international seminar dealing with world oil-related problems appearing in the news. For the first time, this seminar has been opened to oil and gas company specialists, service companies, research centers and independents. This year's theme concerns oil and gas reserves: are they abundant or are we headed towards the shortages announced by some experts? This theme is especially topical in that: oil and gas currently meet two thirds of world energy needs and almost completely dominate the transport sector; the reserves declared by the OAPEC countries account for nearly half of world reserves; the price of a barrel of oil went through the roof in 2004; world energy demand is growing fast and alternative sources of energy are far from ready to take over from oil and gas in the next few decades. Since the reserves correspond to the volume it is technically and economically viable to produce, the seminar has, of course, dealt with the technical and economic questions that arise in connection with exploration and production, but it has also considered changes in the geopolitical context. Presentations by the leading companies of the OAPEC countries and by the IFP group were completed by presentation from the International Energy Agency (IEA), the United States Geological Survey (USGS), the IHS Energy Group, Total and Gaz de France. This document gathers the transparencies of the following presentations: Hydrocarbon reserves in OAPEC members countries: current and future (M. Al-Lababidi); Non OAPEC liquid reserves and production forecasts (Y. Mathieu); World oil and gas resources and production outlook (K. Chew); Global investments in the upstream (F. Birol); Total's policy in the oil and gas sector (C. de Margerie); Gaz de France's policy in the oil and gas sector (J. Abiteboul); NOC/IOC's opportunities in OPEC countries (I. Sandrea); Relationships between companies, countries and investors: How they may

  2. Global Deployment of Reserve Soldiers: A Leadership Challenge

    National Research Council Canada - National Science Library

    McKenzie, Wendy; Healy-Morrow, Isabel

    2006-01-01

    ...? Is there an overlap in organizational cultures, or does military leadership need to provide special attention for these unique soldiers? The purpose of this paper is to demonstrate how a deeper understanding of the overlap between civilian and military organizational culture can improve the psychological preparedness of Reserve Force soldiers who are mobilized for full-time military operations.

  3. Reserve Component Manpower Readiness and Mobilization Policy. Volume 2. Based on the Colloquium on Mobilization with Special Emphasis on Guard and Reserve Components, 1-4 November 1983

    Science.gov (United States)

    1984-03-16

    make arrangements with hotels or motels to support the large influx, especially in the absence of a national emerger.ey auch as the Presidential 100K...experienced in the past decades, and more especially during the Vietnam timeframe, has begun to « bate somewhat but the direct cost of retired individuals

  4. Demand as Frequency Controlled Reserve

    DEFF Research Database (Denmark)

    Xu, Zhao; Østergaard, Jacob; Togeby, Mikael

    2011-01-01

    Relying on generation side alone is deemed insufficient to fulfill the system balancing needs for future Danish power system, where a 50% wind penetration is outlined by the government for year 2025. This paper investigates using the electricity demand as frequency controlled reserve (DFR) as a new...... balancing measure, which has a high potential and can provide many advantages. Firstly, the background of the research is reviewed, including conventional power system reserves and the electricity demand side potentials. Subsequently, the control logics and corresponding design considerations for the DFR...

  5. Sit-to-stand ground reaction force characteristics in blind and sighted female children.

    Science.gov (United States)

    Faraji Aylar, Mozhgan; Jafarnezhadgero, Amir Ali; Salari Esker, Fatemeh

    2018-03-05

    The association between visual sensory and sit-to-stand ground reaction force characteristics is not clear. Impulse is the amount of force applied over a period of time. Also, free moment represents the vertical moment applied in the center of pressure (COP). How the ground reaction force components, vertical loading rate, impulses and free moment respond to long and short term restricted visual information? Fifteen female children with congenital blindness and 45 healthy girls with no visual impairments participated in this study. The girls with congenital blindness were placed in one group and the 45 girls with no visual impairments were randomly divided into three groups of 15; eyes open, permanently eyes closed, and temporary eyes closed. The participants in the permanently eyes closed group closed their eyes for 20 min before the test, whereas temporary eyes closed group did tests with their eyes closed throughout, and those in the eyes open group kept their eyes open. Congenital blindness was associated with increased vertical loading rate, range of motion of knee and hip in the medio-lateral plane. Also, medio-lateral and vertical ground reaction force impulses. Similar peak negative and positive free moments were observed in three groups. In conclusion, the results reveal that sit-to-stand ground reaction force components in blind children may have clinical importance for improvement of balance control of these individuals. Copyright © 2018 Elsevier B.V. All rights reserved.

  6. 77 FR 40253 - Reserve Account

    Science.gov (United States)

    2012-07-09

    .... The commentators represented Rural Development employees who work with the Multi-Family Housing Direct... their annual over-inflated tax bills and assessments. As a result, rent income funding that could be..., as rents cannot be raised to an amount that will cover all current and future reserve expenses...

  7. Demand as Frequency Controlled Reserve

    DEFF Research Database (Denmark)

    Xu, Zhao; Togeby, Mikael; Østergaard, Jacob

    This report summaries the research outcomes of the project ‘Demand as Frequency Controlled Reserve (DFR)’, which has received the support from Energinet.dk’s PSO program, Grant no. 2005-2-6380. The objective of this project is to investigate the technology of using electricity demands for providing...

  8. StringForce

    DEFF Research Database (Denmark)

    Barendregt, Wolmet; Börjesson, Peter; Eriksson, Eva

    2017-01-01

    In this paper, we present the forced collaborative interaction game StringForce. StringForce is developed for a special education context to support training of collaboration skills, using readily available technologies and avoiding the creation of a "mobile bubble". In order to play StringForce ...

  9. Fundamental Drivers of the Cost and Price of Operating Reserves

    Energy Technology Data Exchange (ETDEWEB)

    Hummon, Marissa [National Renewable Energy Lab. (NREL), Golden, CO (United States); Denholm, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jorgenson, Jennie [National Renewable Energy Lab. (NREL), Golden, CO (United States); Palchak, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Kirby, Brendan [Kirby Consultant; Ma, Ookie [U.S. Department of Energy, Washington, DC (United States)

    2013-07-01

    Operating reserves impose a cost on the electric power system by forcing system operators to keep partially loaded spinning generators available for responding to system contingencies variable demand. In many regions of the United States, thermal power plants provide a large fraction of the operating reserve requirement. Alternative sources of operating reserves, such as demand response and energy storage, may provide more efficient sources of these reserves. However, to estimate the potential value of these services, the cost of reserve services under various grid conditions must first be established. This analysis used a commercial grid simulation tool to evaluate the cost and price of several operating reserve services, including spinning contingency reserves and upward regulation reserves. These reserve products were evaluated in a utility system in the western United States, considering different system flexibilities, renewable energy penetration, and other sensitivities. The analysis demonstrates that the price of operating reserves depend highly on many assumptions regarding the operational flexibility of the generation fleet, including ramp rates and the fraction of fleet available to provide reserves.

  10. The determination of contribution of emotional intelligence and parenting styles components to predicts positive psychological components

    OpenAIRE

    hosein Ebrahimi moghadam; mahin Fekraty

    2015-01-01

    Background: Since the essential of positive psychological components, as compliment of deficiency oriented approaches, has begun in recent days,we decided to take into account this new branch of psychology which scientifically considers studying forces of human, as well as because of the importance of this branch of psychology, we also tried to search the contribution of emotional intelligence and parenting styles components to predict positive psychological components. Materials and Methods:...

  11. Mechanical forces in skin disorders.

    Science.gov (United States)

    Hsu, Chao-Kai; Lin, Hsi-Hui; Harn, Hans I-Chen; Hughes, Michael W; Tang, Ming-Jer; Yang, Chao-Chun

    2018-03-08

    Mechanical forces are known to regulate homeostasis of the skin and play a role in the pathogenesis of skin diseases. The epidermis consists of keratinocytes that are tightly adhered to each other by cell junctions. Defects in keratins or desmosomal/hemidesmosomal proteins lead to the attenuation of mechanical strength and formation of intraepidermal blisters in the case of epidermolysis bullosa simplex. The dermis is rich in extracellular matrix, especially collagen, and provides the majority of tensile force in the skin. Keloid and hypertrophic scar, which is the result of over-production of collagen by fibroblasts during the wound healing, are associated with extrinsic tensile forces and changes of intrinsic mechanical properties of the cell. Increasing evidences shows that stiffness of the skin environment determines the regenerative ability during wound healing process. Mechanotransduction pathways are also involved in the morphogenesis and cyclic growth of hair follicles. The development of androgenetic alopecia is correlated to tensile forces generated by the fibrous tissue underlying the scalp. Acral melanoma predominantly occurs in the weight-bearing area of the foot suggesting the role of mechanical stress. Increased dermal stiffness from fibrosis might be the cause of recessive dystrophic epidermolysis bullosa associated squamous cell carcinoma. Strategies to change the mechanical forces or modify the mechanotransduction signals may lead to a new way to treat skin diseases and promote skin regeneration. Copyright © 2018 Japanese Society for Investigative Dermatology. Published by Elsevier B.V. All rights reserved.

  12. Uranium reserves and exploration activity

    International Nuclear Information System (INIS)

    Meehan, R.J.

    1975-01-01

    The strategy that ERDA plans to employ regarding resource appraisal is outlined. All types of uranium occurrences will be evaluated as sources of domestic ore reserves. Industry's exploration efforts will be compiled. These data will include information on land acquisition and costs, footage drilled and costs, estimates of exploration activities and expenditures, exploration for non-sandstone deposits, exploration in non-established areas, and foreign exploration plans and costs. Typical data in each of these areas are given

  13. Gas reserves, discoveries and production

    International Nuclear Information System (INIS)

    Saniere, A.

    2006-01-01

    Between 2000 and 2004, new discoveries, located mostly in the Asia/Pacific region, permitted a 71% produced reserve replacement rate. The Middle East and the offshore sector represent a growing proportion of world gas production Non-conventional gas resources are substantial but are not exploited to any significant extent, except in the United States, where they account for 30% of U.S. gas production. (author)

  14. Demand Response Spinning Reserve Demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Eto, Joseph H.; Nelson-Hoffman, Janine; Torres, Carlos; Hirth,Scott; Yinger, Bob; Kueck, John; Kirby, Brendan; Bernier, Clark; Wright,Roger; Barat, A.; Watson, David S.

    2007-05-01

    The Demand Response Spinning Reserve project is a pioneeringdemonstration of how existing utility load-management assets can providean important electricity system reliability resource known as spinningreserve. Using aggregated demand-side resources to provide spinningreserve will give grid operators at the California Independent SystemOperator (CAISO) and Southern California Edison (SCE) a powerful, newtool to improve system reliability, prevent rolling blackouts, and lowersystem operating costs.

  15. Indian Reserves: Canada's Developing Nations

    OpenAIRE

    Musto, Richard J.

    1990-01-01

    Indian reserves are the most visible reminder of the separation of aboriginal people from the rest of Canada and other Canadians. Illness patterns and social conditions in Native communities closely parallel those in developing nations. While they continue to have a large burden of infectious diseases, these groups also have an increased incidence of chronic and lifestyle diseases as well as environment-related conditions. Similarities can be seen in urban areas between immigrants from abroad...

  16. Processing of Activated Core Components

    Energy Technology Data Exchange (ETDEWEB)

    Friske, A.; Gestermann, G.; Finkbeiner, R.

    2003-02-26

    Used activated components from the core of a NPP like control elements, water channels from a BWR, and others like in-core measurement devices need to be processed into waste forms suitable for interim storage, and for the final waste repository. Processing of the activated materials can be undertaken by underwater cutting and packaging or by cutting and high-pressure compaction in a hot cell. A hot cell is available in Germany as a joint investment between GNS and the Karlsruhe Research Center at the latter's site. Special transport equipment is available to transport the components ''as-is'' to the hot cell. Newly designed underwater processing equipment has been designed, constructed, and operated for the special application of NPP decommissioning. This equipment integrates an underwater cutting device with an 80 ton force underwater in-drum compactor.

  17. Metal binding by food components

    DEFF Research Database (Denmark)

    Tang, Ning

    For calcium binding: Electrochemical method (calcium ion selective electrode) combined with quantum mechanical calculations (density functional theory) were used to investigate the calcium binding affinity of the amino acids and small glycine peptides. The effects of the ionic strength and p......, synergistic effect in calcium binding was found for the small glycine peptide rather than amino acids mixtures with the enhanced driving force up to -6 kJ/mol. Such study provides useful information for the future development of calcium supplements. For zinc binding: Isothermal titration calorimetry...... titration calorimetry and quantum mechanical calculations. This is due to the zinc binding affinity of the relatively softer ligands (investigated food components) will become much stronger than citrate or phytate when they present together in aqueous solution. This mechanism indicates these food components...

  18. Interfacial force measurements using atomic force microscopy

    NARCIS (Netherlands)

    Chu, L.

    2018-01-01

    Atomic Force Microscopy (AFM) can not only image the topography of surfaces at atomic resolution, but can also measure accurately the different interaction forces, like repulsive, adhesive and lateral existing between an AFM tip and the sample surface. Based on AFM, various extended techniques have

  19. Mitigating component performance variation

    Science.gov (United States)

    Gara, Alan G.; Sylvester, Steve S.; Eastep, Jonathan M.; Nagappan, Ramkumar; Cantalupo, Christopher M.

    2018-01-09

    Apparatus and methods may provide for characterizing a plurality of similar components of a distributed computing system based on a maximum safe operation level associated with each component and storing characterization data in a database and allocating non-uniform power to each similar component based at least in part on the characterization data in the database to substantially equalize performance of the components.

  20. Variability and component composition

    NARCIS (Netherlands)

    T. van der Storm (Tijs)

    2004-01-01

    textabstractIn component-based product populations, feature models have to be described at the component level to be able to benefit from a product family approach. As a consequence, composition of components becomes very complex. We describe how component-level variability can be managed in the

  1. Foreign Exchange Reserves: Bangladesh Perspective

    Directory of Open Access Journals (Sweden)

    Md Zahangir Alam

    2013-10-01

    Full Text Available This study is about foreign exchangereserves of Bangladesh. The mainpurpose of this study is to the influence of exchange rates on foreign exchangereserves to the Bangladesh context.  Both the primary and secondary data has been used inthis study. The primary data has been collected through a structuredquestionnaire from 50 respondents. The secondary data, namely Bangladeshforeign exchange reserves (FER, Bangladesh current account balance (CAB,Bangladesh capital andfinancial account balance (CFAB, and BDT/USD exchange rates (ER.  This study covers yearly data from July 01,1996 to June 30, 2005 and quarterly data from July 01, 2005 to June 30, 2012. Findingsof this study shows that out of the selected 16 factors affecting foreignexchange reserves, exchange rates occupy the first position, weighted averagescore (WAS being 4.56. Foreign exchange reserves (FER and current accountbalance (CAB have increased by 502.9087% and 1451.218%,whereas capital and financial account (CFAB has decreased by -649.024% on June30, 2012 compared to June 30, 1997. The influence of other factors heldconstant, as ER changes by 285.6894 units due to one unit change in FER, onaverage in the same direction which represents that ER has positive effect on theFER and this relationship is statistically significant.  62.1526 percentof the variation in FER is explained by ER. The outcomes of Breusch-Godfrey test (LM test, ARCHtest, and the Normality test are that there is a serial correlation among residuals, the variance of residuals is notconstant, and the residuals are not normally distributed.

  2. Brain reserve and cognitive reserve in multiple sclerosis

    Science.gov (United States)

    Rocca, Maria A.; Leavitt, Victoria M.; Riccitelli, Gianna; Comi, Giancarlo; DeLuca, John; Filippi, Massimo

    2013-01-01

    Objective: We first tested the brain reserve (BR) hypothesis in multiple sclerosis (MS) by examining whether larger maximal lifetime brain volume (MLBV; determined by genetics) protects against disease-related cognitive impairment, and then investigated whether cognitive reserve (CR) gained through life experience (intellectually enriching leisure activities) protects against cognitive decline independently of MLBV (BR). Methods: Sixty-two patients with MS (41 relapsing-remitting MS, 21 secondary progressive MS) received MRIs to estimate BR (MLBV, estimated with intracranial volume [ICV]) and disease burden (T2 lesion load; atrophy of gray matter, white matter, thalamus, and hippocampus). Early-life cognitive leisure was measured as a source of CR. We assessed cognitive status with tasks of cognitive efficiency and memory. Hierarchical regressions were used to investigate whether higher BR (ICV) protects against cognitive impairment, and whether higher CR (leisure) independently protects against cognitive impairment over and above BR. Results: Cognitive status was positively associated with ICV (R2 = 0.066, p = 0.017). An ICV × disease burden interaction (R2 = 0.050, p = 0.030) revealed that larger ICV attenuated the impact of disease burden on cognition. Controlling for BR, higher education (R2 = 0.047, p = 0.030) and leisure (R2 = 0.090, p = 0.001) predicted better cognition. A leisure × disease burden interaction (R2 = 0.037, p = 0.030) showed that leisure independently attenuated the impact of disease burden on cognition. Follow-up analyses revealed that BR protected against cognitive inefficiency, not memory deficits, whereas CR was more protective against memory deficits than cognitive inefficiency. Conclusion: We provide evidence of BR in MS, and show that CR independently protects against disease-related cognitive decline over and above BR. Lifestyle choices protect against cognitive impairment independently of genetic factors outside of one's control

  3. Method for lateral force calibration in atomic force microscope using MEMS microforce sensor.

    Science.gov (United States)

    Dziekoński, Cezary; Dera, Wojciech; Jarząbek, Dariusz M

    2017-11-01

    In this paper we present a simple and direct method for the lateral force calibration constant determination. Our procedure does not require any knowledge about material or geometrical parameters of an investigated cantilever. We apply a commercially available microforce sensor with advanced electronics for direct measurement of the friction force applied by the cantilever's tip to a flat surface of the microforce sensor measuring beam. Due to the third law of dynamics, the friction force of the equal value tilts the AFM cantilever. Therefore, torsional (lateral force) signal is compared with the signal from the microforce sensor and the lateral force calibration constant is determined. The method is easy to perform and could be widely used for the lateral force calibration constant determination in many types of atomic force microscopes. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. Joint Force Cyberspace Component Command: Establishing Cyberspace Operations Unity of Effort for the Joint Force Commander

    Science.gov (United States)

    2015-05-01

    expressed herein are those of the student author and do not neces- sarily represent the views of the US Army Command and General Staff college or any...strengths, the United States and DoD knowledge of cyberspace combined with the United States technical prowess and spirit of entrepreneurship provide us...Evera, Stephen. Guide to Methods for Students of Political Science. Ithaca, NY: Cornell University Press, 1997. Williams, Brett T. “The Joint

  5. Residual strength evaluation of concrete structural components ...

    Indian Academy of Sciences (India)

    This paper presents methodologies for residual strength evaluation of concrete structural components using linear elastic and nonlinear fracture mechanics principles. The effect of cohesive forces due to aggregate bridging has been represented mathematically by employing tension softening models. Various tension ...

  6. Labor Force Participation Rate

    Data.gov (United States)

    City and County of Durham, North Carolina — This thematic map presents the labor force participation rate of working-age people in the United States in 2010. The 2010 Labor Force Participation Rate shows the...

  7. Aerodynamic Lifting Force.

    Science.gov (United States)

    Weltner, Klaus

    1990-01-01

    Describes some experiments showing both qualitatively and quantitatively that aerodynamic lift is a reaction force. Demonstrates reaction forces caused by the acceleration of an airstream and the deflection of an airstream. Provides pictures of demonstration apparatus and mathematical expressions. (YP)

  8. The implications of force reflection for teleoperation in space

    International Nuclear Information System (INIS)

    Draper, J.V.; Herndon, J.N.; Moore, W.E.

    1987-01-01

    This paper reviews previous research on teleoperator force feedback and reports results of a testing program which assessed the impact of force reflection on teleoperator task performance. Force reflection is a type of force feedback in which the forces acting on the remote portion of the teleoperator are displayed to the operator by back-driving the master controller. The testing program compared three force reflection levels: 4 to 1 (four units of force on the slave produce one unit of force at the master controller), 1 to 1, and infinity to 1 (no force reflection). Time required to complete tasks, rate of occurrence of errors, the maximum force applied to tasks components, and variability in forces applied to components during completion of representative remote handling tasks were used as dependent variables. Operators exhibited lower error rates, lower peak forces, and more consistent application of forces using force reflection than they did without it. These data support the hypothesis that force reflection provides useful information for teleoperator users. The earlier literature and the results of the experiment are discussed in terms of their implications for space-based teleoperator systems. The discussion describes the impact of force reflection on task completion performance and task strategies, as suggested by the literature. It is important to understand the trade-offs involved in using telerobotic systems with and without force reflection. Force-reflecting systems are typically more expensive (in mass, volume, and price per unit), but they reduce mean time to repair and may be safer to use, compared to systems without force reflection

  9. Z' reservation at LEP2

    CERN Document Server

    Montagna, G.; Piccinini, F.; Renard, F.M.; Verzegnassi, C.

    1995-01-01

    We consider the possibility that one extra Z\\equiv Z' exists with arbitrary mass and fermion couplings that do not violate (charged) lepton universality. We show that, in such a situation, a functional relationship is generated between the \\underline{deviations} from the SM values of three leptonic observables of two-fermion production at future e^+e^- colliders that is completely independent of the values of the Z' mass and couplings. This selects a certain region in the 3-d space of the deviations that is \\underline{characteristic} of the model (Z' "reservation"). As a specific and relevant example, we show the picture that would emerge at LEP2 under realistic experimental conditions.

  10. Measurement of tool forces in diamond turning

    Energy Technology Data Exchange (ETDEWEB)

    Drescher, J.; Dow, T.A.

    1988-12-01

    A dynamometer has been designed and built to measure forces in diamond turning. The design includes a 3-component, piezoelectric transducer. Initial experiments with this dynamometer system included verification of its predicted dynamic characteristics as well as a detailed study of cutting parameters. Many cutting experiments have been conducted on OFHC Copper and 6061-T6 Aluminum. Tests have involved investigation of velocity effects, and the effects of depth and feedrate on tool forces. Velocity has been determined to have negligible effects between 4 and 21 m/s. Forces generally increase with increasing depth of cut. Increasing feedrate does not necessarily lead to higher forces. Results suggest that a simple model may not be sufficient to describe the forces produced in the diamond turning process.

  11. Inductively Modeling Parallel, Normal, and Frictional Forces

    Science.gov (United States)

    Wyrembeck, Edward P.

    2005-02-01

    This year, instead of resolving the weight mg of an object resting on an incline into force components parallel and perpendicular to the surface of the incline, I asked my students to actually measure these forces at various angles of inclination and graph the data. I wanted my students to inductively discover mg sin θ and mg cos θ, and to use these graphs to confront the passive nature of the static frictional force. I believe the graphs themselves are very powerful conceptual tools that are often never discovered and used by students who only learn to use equations at specific angles to solve specific quantitative problems.

  12. Assessment of renewable energy reserves in Taiwan

    International Nuclear Information System (INIS)

    Chen, Falin; Lu, Shyi-Min; Tseng, Kuo-Tung; Wang, Eric; Lee, Si-Chen

    2010-01-01

    Since Taiwan imports more than 99% of energy supply from foreign countries, energy security has always been the first priority for government to formulate energy policy. The development of renewable energy not only contributes to the independence of energy supply, but also achieves benefits of economic development and environmental protection. Based upon information available to public, the present paper reassesses reserves of various renewable energies in Taiwan. The assessment includes seven kinds of renewable energies, namely, solar energy, wind power, biomass energy, wave energy, tidal energy, geothermal energy and hydropower, which are all commercialized and matured in terms of current technologies. Other renewable energies, which have not proven as matured as the aforementioned ones, are only assessed preliminarily in this paper, such as second generation of biomass, deep geothermal energy, the Kuroshio power generation and ocean thermal energy conversion. According to the estimation of this paper, the reserve of wind energy, up to 29.9 kWh/d/p (i.e., kWh per day per person), is the largest one among seven kinds of renewable energies in Taiwan, followed by 24.27 kWh/d/p of solar energy, 4.55 kWh/d/p of biomass, 4.58 kWh/d/p of ocean energy, 0.67 kWh/d/p of geothermal energy and 16.79 kWh/d/p of hydropower. If regarding biomass as a primary energy, and assuming 40% being the average efficiency to convert primary energy into electricity, the total power of the seven kinds of renewable energy reserves is about 78.03 kWh/d/p, which is equal to 2.75 times of 28.35 kWh/d/p of national power generation in 2008. If the reserves of 54.93 kWh/d/p estimated from other four kinds of renewable energies that have not technically matured yet are also taken into account, it will result that the reserves of renewable energy in Taiwan can be quite abundant. Although the results of the assessment point out that Taiwan has abundant renewable energy resources, the four inherent

  13. Modular core component support for nuclear reactor

    International Nuclear Information System (INIS)

    Finch, L.M.; Anthony, A.J.

    1975-01-01

    The core of a nuclear reactor is made up of a plurality of support modules for containing components such as fuel elements, reflectors and control rods. Each module includes a component support portion located above a grid plate in a low-pressure coolant zone and a coolant inlet portion disposed within a module receptacle which depends from the grid plate into a zone of high-pressure coolant. Coolant enters the module through aligned openings within the receptacle and module inlet portion and flows upward into contact with the core components. The modules are hydraulically balanced within the receptacles to prevent expulsion by the upward coolant forces. (U.S.)

  14. Acoustic force spectroscopy

    NARCIS (Netherlands)

    Sitters, G.; Kamsma, D.; Thalhammer, G.; Ritsch-Marte, M.; Peterman, E.J.G.; Wuite, G.J.L.

    2015-01-01

    Force spectroscopy has become an indispensable tool to unravel the structural and mechanochemical properties of biomolecules. Here we extend the force spectroscopy toolbox with an acoustic manipulation device that can exert forces from subpiconewtons to hundreds of piconewtons on thousands of

  15. Forces in General Relativity

    Science.gov (United States)

    Ridgely, Charles T.

    2010-01-01

    Many textbooks dealing with general relativity do not demonstrate the derivation of forces in enough detail. The analyses presented herein demonstrate straightforward methods for computing forces by way of general relativity. Covariant divergence of the stress-energy-momentum tensor is used to derive a general expression of the force experienced…

  16. Reusable Component Services

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Reusable Component Services (RCS) is a super-catalog of components, services, solutions and technologies that facilitates search, discovery and collaboration in...

  17. Kinetic Ductility and Force-Spike Resistance of Proteins from Single-Molecule Force Spectroscopy.

    Science.gov (United States)

    Cossio, Pilar; Hummer, Gerhard; Szabo, Attila

    2016-08-23

    Ductile materials can absorb spikes in mechanical force, whereas brittle ones fail catastrophically. Here we develop a theory to quantify the kinetic ductility of single molecules from force spectroscopy experiments, relating force-spike resistance to the differential responses of the intact protein and the unfolding transition state to an applied mechanical force. We introduce a class of unistable one-dimensional potential surfaces that encompass previous models as special cases and continuously cover the entire range from ductile to brittle. Compact analytic expressions for force-dependent rates and rupture-force distributions allow us to analyze force-clamp and force-ramp pulling experiments. We find that the force-transmitting protein domains of filamin and titin are kinetically ductile when pulled from their two termini, making them resistant to force spikes. For the mechanostable muscle protein titin, a highly ductile model reconciles data over 10 orders of magnitude in force loading rate from experiment and simulation. Copyright © 2016 Biophysical Society. All rights reserved.

  18. Nanoparticle movement: plasmonic forces and physical constraints.

    Science.gov (United States)

    Batson, P E; Reyes-Coronado, A; Barrera, R G; Rivacoba, A; Echenique, P M; Aizpurua, J

    2012-12-01

    Nanoparticle structures observed in aberration-corrected electron microscopes exhibit many types of behavior, some of which are dominated by intrinsic conditions, unrelated to the microscope environment. Some behaviors are clearly driven by the electron beam, however, and the question arises as to whether these are similar to intrinsic mechanisms, useful for understanding nanoscale behavior, or whether they should be regarded as unwanted modification of as-built specimens. We have studied a particular kind of beam-specimen interaction - plasmon dielectric forces caused by the electric fields imposed by a passing swift electron - identifying four types of forced motion, including both attractive and repulsive forces on single nanoparticles, and coalescent and non-coalescent forces in groups of two or more nanoparticles. We suggest that these forces might be useful for deliberate electron beam guided movement of nanoparticles. Copyright © 2012 Elsevier B.V. All rights reserved.

  19. Software component quality evaluation

    Science.gov (United States)

    Clough, A. J.

    1991-01-01

    The paper describes a software inspection process that can be used to evaluate the quality of software components. Quality criteria, process application, independent testing of the process and proposed associated tool support are covered. Early results indicate that this technique is well suited for assessing software component quality in a standardized fashion. With automated machine assistance to facilitate both the evaluation and selection of software components, such a technique should promote effective reuse of software components.

  20. Measurement of dynamic and static radiation force on a sphere.

    Science.gov (United States)

    Chen, Shigao; Silva, Glauber T; Kinnick, Randall R; Greenleaf, James F; Fatemi, Mostafa

    2005-05-01

    Dynamic radiation force from ultrasound has found increasing applications in elasticity imaging methods such as vibro-acoustography. Radiation force that has both static and dynamic components can be produced by interfering two ultrasound beams of slightly different frequencies. This paper presents a method to measure both static and dynamic components of the radiation force on a sphere suspended by thin threads in water. Due to ultrasound radiation force, the sphere deflects to an equilibrant position and vibrates around it. The static radiation force is estimated from the deflection of the sphere. The dynamic radiation force is estimated from the calculated radiation impedance of the sphere and its vibration speed measured by a laser vibrometer. Experimental results on spheres of different size, vibrated at various frequencies, confirm the theoretical prediction that the dynamic and static radiation force on a sphere have approximately equal magnitudes [G. T. Silva, Phys. Rev. E 71, 056617 (2005)].

  1. Reactor component automatic grapple

    International Nuclear Information System (INIS)

    Greenaway, P.R.

    1982-01-01

    A grapple for handling nuclear reactor components in a medium such as liquid sodium which, upon proper seating and alignment of the grapple with the component as sensed by a mechanical logic integral to the grapple, automatically seizes the component. The mechanical logic system also precludes seizure in the absence of proper seating and alignment. (author)

  2. Principal component analysis

    NARCIS (Netherlands)

    Bro, R.; Smilde, A.K.

    2014-01-01

    Principal component analysis is one of the most important and powerful methods in chemometrics as well as in a wealth of other areas. This paper provides a description of how to understand, use, and interpret principal component analysis. The paper focuses on the use of principal component analysis

  3. Statistics of force networks

    Science.gov (United States)

    Tighe, Brian

    2009-03-01

    We study the statistics of contact forces in the force network ensemble, a minimal model of jammed granular media that emphasizes the role of vector force balance. We show that the force probability distribution can be calculated analytically by way of an analogy to equilibrium ensemble methods. In two dimensions the large force tail decays asymptotically as a Gaussian, distinct from earlier predictions, due to the existence of a conserved quantity related to the presence of local vector force balance. We confirm our predictions with highly accurate statistical sampling -- we sample the force distribution over more than 40 decades -- permitting unambiguous confrontation of theory with numerics. We show how the conserved quantity arises naturally within the context of any constant stress ensemble.

  4. Quantum fictitious forces

    DEFF Research Database (Denmark)

    Bialynicki-Birula, I; Cirone, M.A.; Dahl, Jens Peder

    2002-01-01

    We present Heisenberg's equation of motion for the radial variable of a free non-relativistic particle in D dimensions. The resulting radial force consists of three contributions: (i) the quantum fictitious force which is either attractive or repulsive depending on the number of dimensions, (ii......) a singular quantum force located at the origin, and (iii) the centrifugal force associated with non-vanishing angular momentum. Moreover, we use Heisenberg's uncertainty relation to introduce a lower bound for the kinetic energy of an ensemble of neutral particles. This bound is quadratic in the number...... of atoms and can be traced back to the repulsive quantum fictitious potential. All three forces arise for a free particle: "Force without force"....

  5. Influence of spinal disc translational stiffness on the lumbar spinal loads, ligament forces and trunk muscle forces during upper body inclination.

    Science.gov (United States)

    Arshad, Rizwan; Zander, Thomas; Bashkuev, Maxim; Schmidt, Hendrik

    2017-08-01

    Inverse dynamic musculoskeletal human body models are commonly used to predict the spinal loads and trunk muscle forces. These models include rigid body segments, mechanical joints, active and passive structural components such as muscles, tendons and ligaments. Several studies used simple definition of lumbar spinal discs idealized as spherical joints with infinite translational stiffness. The aim of the current sensitivity study was to investigate the influence of disc translational stiffness (shear and compressive stiffness) on the joint kinematics and forces in intervertebral discs (L1-L5), trunk muscles and ligaments for an intermediately flexed position (55°). Based on in vitro data, a range of disc shear stiffness (100-200N/mm) and compressive stiffness (1900-2700N/mm) was considered in the model using the technique of force dependent kinematics (FDK). Range of variation in spinal loads, trunk muscle forces and ligaments forces were calculated (with & without load in hands) and compared with the results of reference model (RM) having infinite translational stiffness. The discs' centers of rotation (CoR) were computed for L3-L4 and L4-L5 motion segments. Between RM and FDK models, maximum differences in compressive forces were 7% (L1-L2 & L2-L3), 8% (L3-L4) and 6% (L4-L5) whereas in shear forces 35% (L1-L2), 47% (L2-L3), 45% (L3-L4) and more than 100% in L4-L5. Maximum differences in the sum of global and local muscle forces were approximately 10%, whereas in ligament forces were 27% (supraspinous), 40% (interspinous), 56% (intertransverse), 58% (lig. flavum) and 100% (lig. posterior). The CoRs were predicted posteriorly, below (L3-L4) and in the disc (L4-L5). FDK model predicted lower spinal loads, ligament forces and varied distribution of global and local muscle forces. Consideration of translational stiffnesses influenced the model results and showed increased differences with lower stiffness values. Copyright © 2017 IPEM. Published by Elsevier Ltd. All

  6. Final Environmental Assessment Realignment of Jenkins Armed Forces Reserve Center (AFRC), Kirtland Air Force Base, New Mexico, BRAC 2005

    Science.gov (United States)

    2007-05-01

    Materials Hazardous materials such as pesticides , herbicides, and chemicals associated with the operation of research laboratories, fire control...any problems, let me know and I’ll see what I can do with it. Evelyn Watkins NEPA Program Manager Enviromental Management Branch Kirtland AFB, NM

  7. Environmental Assessment: BRAC Construction and Operation of Armed Forces Reserve Center at Malmstrom Air Force Base, Great Falls, Montana

    Science.gov (United States)

    2009-06-01

    the preferred site area. Although a National Historic Landmark, " Portage around MALMSTROM AFB, GREAT FALLS, MONTANA 4-6 JUNE 2009 the Great Falls...Avenue North, and the other is located near the southwest end of the runway (USAF, 2007). An inventory of wetland sites on Malmstrom AFB, conducted in...settlement. 4.9.1.4 Cultural Resource Inventories and Section 106 Consultations Research was conducted via the Montana SHPO to determine the locations and

  8. [Operational medical reserve within the French Mililitary Health Service].

    Science.gov (United States)

    Vergez-Larrouget, Claude; Roberton, Delphine; Schneider, Cindy; Reggad, Farid; Charrot, François; Cueff, Serge

    2014-09-01

    The operational reserve is an essential component of the army health service thanks to the trained and experienced healthcare professionals. From a civilian background or with prior active duty, their technical and military skills enable them to provide medical support for all types of missions, both within France and abroad.

  9. Time-averaged currents in the Northeast Corridor Reserve during November 2013.

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A 2D numerical model, CMS-Flow, was implemented for the Northeast Corridor Reserve (NECR) using a telescoping grid. Tide and wind forcing was provided to the model...

  10. Static tensioning promotes hamstring tendons force relaxation more reliably than cycling tensioning.

    Science.gov (United States)

    Piedade, Sérgio Rocha; Dal Fabbro, Inácio Maria; Mischan, Martha Maria; Piedade, Cezar; Maffulli, Nicola

    2017-08-01

    Graft elongation might be a major reason for increased anterior laxity after anterior cruciate ligament (ACL) reconstruction. This study analyzed the force relaxation values and their stabilization when single strands of the gracilis and semitendinosus tendons underwent cyclic and static tensioning at 2.5% strain level, and compared the efficiency of static and cyclic tensioning in promoting force relaxation. Eighteen gracilis tendons and 18 semitendinosus tendons from nine male cadavers (mean age: 22.44years) were subjected to 10 in vitro cyclic loads at 2.5% strain level, or to a static load at 2.5% strain level. During cyclic loading, the reduction in force values tended to stabilize after the sixth cyclic load, while, in the case of static loading, this stabilization occurred by the second minute. Comparing static and cyclic loading, the gracilis tendon had similar mechanical responses in both conditions, while the semitendinosus tendon showed greater force relaxation in static compared with cyclic loading. Considering that the semitendinosus tendon is the main component of the hamstring graft, its biomechanical response to loading should guide the tensioning protocol. Therefore, static tensioning seems more effective for promoting force relaxation of the semitendinosus tendon than cyclic tensioning. The gracilis tendon showed a similar mechanical response to either tensioning protocols. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. Modeling capillary forces for large displacements

    NARCIS (Netherlands)

    Mastrangeli, M.; Arutinov, G.; Smits, E.C.P.; Lambert, P.

    2014-01-01

    Originally applied to the accurate, passive positioning of submillimetric devices, recent works proved capillary self-alignment as effective also for larger components and relatively large initial offsets. In this paper, we describe an analytic quasi-static model of 1D capillary restoring forces

  12. Nellis and Creech Air Force Bases Capital Improvements Program Environmental Assessment

    Science.gov (United States)

    2008-09-01

    57th Wing, other Air Force units, Navy, Marine Corps and allied air forces. Creech AFB is also the primary training site for the United States Air...Forces, Air National Guard, U.S. Air Force Reserve, Army, Navy, Marine Corps, and allied air forces. They are led by a Blue Forces commander who...includes desert iguana (Dipsosaurus dorsalis), zebra-tailed lizard (Callosaurus draconoides), side-blotched lizard, horned lizards (Phrynosoma spp

  13. Federal Reserve System Semiannual Regulatory Agenda

    Science.gov (United States)

    2010-12-20

    ... [The Regulatory Plan and Unified Agenda of Federal Regulatory and Deregulatory Actions] [Federal Reserve System Semiannual Regulatory Agenda ] Part XXI Federal Reserve System Semiannual Regulatory Agenda... Flexibility Agenda AGENCY: Board of Governors of the Federal Reserve System. ACTION: Semiannual regulatory...

  14. Relativistic Linear Restoring Force

    Science.gov (United States)

    Clark, D.; Franklin, J.; Mann, N.

    2012-01-01

    We consider two different forms for a relativistic version of a linear restoring force. The pair comes from taking Hooke's law to be the force appearing on the right-hand side of the relativistic expressions: d"p"/d"t" or d"p"/d["tau"]. Either formulation recovers Hooke's law in the non-relativistic limit. In addition to these two forces, we…

  15. Management of Talar Component Subsidence.

    Science.gov (United States)

    Li, Shu-Yuan; Myerson, Mark S

    2017-06-01

    Component subsidence has been found to be the top complication that leads to failure of the total ankle arthroplasty (TAA). The cause of subsidence formation is unclear, and is multifactorial. Talar subsidence is more frequently met than tibial subsidence, and the subsequent big bone loss is demanding to handle. As a revision treatment option, neither a revision TAA nor a salvage ankle and/or hindfoot arthrodesis procedure is easy to perform or can obtain a definite outcome. The Salto XT can be used to treat most of the TAA systems available for use in the United States with acceptable short-term outcomes. Copyright © 2017 Elsevier Inc. All rights reserved.

  16. RSOI: Force Deployment Bottleneck

    National Research Council Canada - National Science Library

    D'Amato, Mark

    1998-01-01

    This study uses The Theory Of Constraints (TOC) management methodology and recent military missions to show that RSOI operations are generally the limiting constraint to force deployment operations...

  17. Bi-Force

    DEFF Research Database (Denmark)

    Sun, Peng; Speicher, Nora K; Röttger, Richard

    2014-01-01

    outperformed existing tools with Bi-Force at least when following the evaluation protocols from Eren et al. Bi-Force is implemented in Java and integrated into the open source software package of BiCluE. The software as well as all used datasets are publicly available at http://biclue.mpi-inf.mpg.de....... of pairwise similarities. We first evaluated the power of Bi-Force to solve dedicated bicluster editing problems by comparing Bi-Force with two existing algorithms in the BiCluE software package. We then followed a biclustering evaluation protocol in a recent review paper from Eren et al. (2013) (A...

  18. Intermolecular and surface forces

    CERN Document Server

    Israelachvili, Jacob N

    2011-01-01

    This reference describes the role of various intermolecular and interparticle forces in determining the properties of simple systems such as gases, liquids and solids, with a special focus on more complex colloidal, polymeric and biological systems. The book provides a thorough foundation in theories and concepts of intermolecular forces, allowing researchers and students to recognize which forces are important in any particular system, as well as how to control these forces. This third edition is expanded into three sections and contains five new chapters over the previous edition.· starts fr

  19. Macroscopic forces from supersymmetry

    CERN Document Server

    Dimopoulos, Savas K

    1996-01-01

    We argue that theories in which supersymmetry breaking originates at low energies often contain scalar particles that mediate coherent gravitational strength forces at distances less than a cm. We estimate the strength and range of these forces in several cases. Present limits on such forces are inadequate. However new techniques, such as those based on small cryogenic mechanical oscillators, may improve the present limits by ten orders of magnitude or discover new forces as weak as 1 \\% of gravity at distances down to 40 microns.

  20. Supply chain components

    Directory of Open Access Journals (Sweden)

    Vieraşu, T.

    2011-01-01

    Full Text Available In this article I will go through three main logistics components, which are represented by: transportation, inventory and facilities, and the three secondary logistical components: information, production location, price and how they determine performance of any supply chain. I will discuss then how these components are used in the design, planning and operation of a supply chain. I will also talk about some obstacles a supply chain manager may encounter.

  1. Supply chain components

    OpenAIRE

    Vieraşu, T.; Bălăşescu, M.

    2011-01-01

    In this article I will go through three main logistics components, which are represented by: transportation, inventory and facilities, and the three secondary logistical components: information, production location, price and how they determine performance of any supply chain. I will discuss then how these components are used in the design, planning and operation of a supply chain. I will also talk about some obstacles a supply chain manager may encounter.

  2. 2015 Workplace and Gender Relations Survey of Reserve Component Members: Tabulations of Responses

    Science.gov (United States)

    2016-03-17

    environment and sexual quid pro quo) and/or the gender discrimination prevalence rate...frame of “12 months prior to taking the survey.”4 3. Gender-Related MEO Violations—Experiences of MEO violations ( discrimination and sexual ...for sexual harassment, gender discrimination , and sexual assault to tailor question stems and survey responses to each respondent based on his/her

  3. 2015 Workplace and Gender Relations Survey of Reserve Component Members: Statistical Methodology Report

    Science.gov (United States)

    2016-03-17

    Sexual harassment, gender discrimination , and sexual assault. The 2014 RMWS nonresponse adjustment involved two steps, each of which produced a...were necessary. Using completed 2015 cases, six outcome variables were modeled for females: sexual harassment, gender discrimination , sexual quid... discrimination , and sexual assault were modeled because few incidents were reported for the other three variables. Table 5 provides a list of the candidate

  4. Army Reserve Components: Improvements Needed to Data Quality and Management Procedures to Better Report Soldier Availability

    Science.gov (United States)

    2015-07-01

    surgery, or pregnancy . However, once a medical treatment provider determines that a soldier has a condition that does not appear to meet medical...801-7077, or TDD (202) 512-2537. Orders may be paid for using American Express, Discover Card , MasterCard, Visa, check, or money order. Call for

  5. A Nation in Need: The Air Reserve Component and Wildland Firefighting

    Science.gov (United States)

    2015-02-17

    responsiveness i In addition to the examples to follow in this article , USNORTHCOM Wildland...argument is often made by OSD when advocating a Title 10 mandate. It is the opinion of this author that this is a gratuitous attempt to make unity...Command for No-Notice Events: Integrating the Military Response to Domestic Disasters,” Homeland Security Affairs, Vol 7, Article 4 (February 2011). 16

  6. 2015 Workplace and Gender Relations Survey of Reserve Component Members. Overview Report (2015 WGRR)

    Science.gov (United States)

    2016-03-01

    prevention and response of sexual harassment and gender discrimination . The overall goal of ODMEO is to provide an “environment in which Service members are...and MEO violations pertaining to sexual harassment and gender discrimination . Historically, to measure sexual assault, DMDC’s WGR surveys have used...experiences of a sexually hostile work environment and/or sexual quid pro quo, and gender discrimination . Chapter 1 provides additional information

  7. Reserve Component Field-Grade Officer Preparation for Natural Disaster Relief

    Science.gov (United States)

    2013-03-01

    effects of tropical cyclone events including hurricanes that make landfall.15 The combination of large numbers of people near the coast and the...Military Duty Status The HSPD 5 slide effectively condenses the information contained in the directive. There is a hyperlink on the slide to the...National Climatic Data Center Technical Report No. 2003-01, (December 2003):7. 13 Franks Hobbs and Nicole Stoops , Demographic Trends in the 20th Century

  8. 2011 Workplace and Equal Opportunity Survey of Reserve Component Members: Tabulations of Responses

    Science.gov (United States)

    2014-03-01

    560 DMDC 107. What is your religion , if any? 1. Christian (e.g., Protestant, Catholic, Orthodox, Mormon /Church of Jesus Christ of Latter Day...558  107.  What is your religion , if any?.......................................................................... 560  2011 Workplace and Equal...reside and their religion . Population and Reporting Categories The population of interest for the 2011 WEOR consisted of members from the Selected

  9. Evaluation of HRV Biofeedback as a Resilience Building Intervention in the Reserve Component

    Science.gov (United States)

    2017-08-01

    health care provider a. Primary care physician or general medical doctor 1 2 3 4 5 6 7 b. Mental health professional (e.g., psychologist ...professional at a military facility (e.g., psychologist , psychiatrist, clinical social worker, or other mental health counselor...1 2 d. Civilian mental health professional (e.g., psychologist , psychiatrist, clinical social worker, or other mental

  10. Analysis of Suicide Behaviors in the Navy Active Duty and Reserve Component Population

    Science.gov (United States)

    2015-03-01

    to Fire Arms Firearms have consistently been the primary method of suicide and the most lethal means of death for both the civilian and military...populations. Non-military firearms were used in more than 40% of all DOD reported suicides in 2008–2012. During this same time period, military... firearms caused less than 25% of all DOD suicides (Smolenski, 2013). This contradicts the belief that military firearms put service members at an

  11. 2004 Workplace and Gender Relations Survey of Reserve Component Members: Tabulations of Responses

    National Research Council Canada - National Science Library

    2005-01-01

    .... This report gathered information on demographics, military workplace information, satisfaction and retention, military/civilian personnel categories and civilian education status, readiness, health...

  12. Reserve Component Training for Operating and Maintaining the M48A5 Tank

    Science.gov (United States)

    1977-08-01

    assembly. . Removed retainer clip and charger assembly from projecting stud. 1*. INSPECT M219 MACHIKEGUK (AB201) . Checked all metal ...Reported any daina^e to ir.cunt to the vehicle coriander . . Adjusted the daylight and IR headrest for proper fit. . Opened ballistic...Readiness Test. c. Given an M48A5 tank with gun tube aimed at a suitable boresight target (but slightly out of allnement with respect to target), heavy

  13. Basic Training of Non-Prior Service Personnel in the Reserve Component

    Science.gov (United States)

    2003-04-01

    For example, the Wall Street Journal recently quoted an about-to-be deployed Naval Reservist as saying she chose the Navy because it was the only...Equipment,” The Officer 80, no. 1 (January/February 2003): 24. 2 General Barry L. McCaffrey, Editorial, Wall Street Journal , 1 April 2003. 3...www.npsac.navy.mil. 6 Greg Jaffe, “Today, Military Kids Often Say Goodbye to Dad- and Mom,” Wall Street Journal , 11 March 2003. 7 Representative Bob Stump, “The

  14. Issues Related to Recruitment of Enlisted Personnel for the Reserve Components. Wave II. Technical Volume. Supplement.

    Science.gov (United States)

    1980-06-01

    O I O R N R A N Z T O t%,, cte for Deeseac inD(it plicale) Defns Manoe Data-Cener-0491 .E (City, State, and ZIP Code) 10 SOURCE OF FUNDING NUMBERS P...3() 4() 9() 1 e. Fisn l( ) 2( ) 3( ) 4( ) 9( f. Gardening 1( ) 2( ) 3( ) 4( ) 9( ) g. Watching a football game 1( ) 2( ) 3( ) 4( ) 9( ) h. Reading... football game 1( ) 2( ) 3( ) 4( ) 9( )L h. Reading about medicine l( ) 2( ) 3( ) 4( ) 9( )-4 1. Dining out 1() 2() 3() 4() 9( )- * j. Participating

  15. Reserve Component General and Flag Officers: A Review of Requirements and Authorized Strength

    Science.gov (United States)

    2016-01-01

    a senior civilian—SES, Defense Intelligence Senior Executive Service ( DISES ), or Defense Intelligence Senior Level (DISL). RAND researchers selected...serve as the superior of flag or general officers or SES civil - ians.3 It is also commonly held that a flag or general officer should be the superior...ing with allied and interagency communities on intelligence and counterintelligence issues, so any potential conversion to DISES /DISL would have to

  16. Hot gas path component

    Science.gov (United States)

    Lacy, Benjamin Paul; Kottilingam, Srikanth Chandrudu; Porter, Christopher Donald; Schick, David Edward

    2017-09-12

    Various embodiments of the disclosure include a turbomachine component. and methods of forming such a component. Some embodiments include a turbomachine component including: a first portion including at least one of a stainless steel or an alloy steel; and a second portion joined with the first portion, the second portion including a nickel alloy including an arced cooling feature extending therethrough, the second portion having a thermal expansion coefficient substantially similar to a thermal expansion coefficient of the first portion, wherein the arced cooling feature is located within the second portion to direct a portion of a coolant to a leakage area of the turbomachine component.

  17. CORE COMPONENT POT

    Energy Technology Data Exchange (ETDEWEB)

    MARTIN RL; OMBERG RP

    1975-12-19

    The core component pot is an open top vessel used to hold both new and irradiated core components for storage in the IDS and for holding the components submerged in sodium while being trasported inside CLEM. The top of the CCP is equipped with a grapple lip which is engaged by the hoisting grapples. Heat for maintaining the preheat of new components and dissipation of decay heat of irradiated fuel assemblies is conducted between the wall of the pot and the surrounding environment by thermal radiation and convection.

  18. Forces due to surface water measured by force microscopy. Consequences for anchoring biological cells to surfaces

    International Nuclear Information System (INIS)

    Schilcher, K.

    1997-05-01

    Interaction forces in 'Scanning Force Microscopy' (SFM). Force curves revealed exponentially decaying, attractive forces between silicon tip and silicon sample in aqueous media. Replacing the silicon sample by a sheet of mica, the interaction forces had both, an attractive and a repulsive component. Addition of salts generally reduced the forces. At 500 mM salt concentration, the attractive force became quantized with a residual force value of 23 pN. The attractive force is attributed to the gain in energy of water molecules which are released from surface water into free water during tip-sample approach. This conclusion is supported by a statistical model. The repulsive force contribution in the case of mica, is caused by hydration forces due to the spatial organization of crystalline water on the mica surface. Anchoring of biological cells. Molecular resolution of cell surfaces by SFM requires cell anchoring without interference with cell physiology. For this a novel strategy, 'hydrophobic anchoring' was designed. It avoids strong attractive forces between cell and by using a flexible spacer molecule. It establishes anchoring by a lipid (bound to the spacer), which weakly interacts with the hydrophobic core of the cell membrane. The method was subjected to tests using RBL-2H3, CH0 αβ and HEK-293 cells. The strength of cell anchoring was assayed by shear forces. In all cases 'hydrophobic anchoring' via a spacer caused elective anchoring much beyond controls. Such cell anchoring was employed for the imaging of RBL-2H3 cells by SFM. Images showed considerable finer details than images of loosely adsorbed cells. With about 50 rim resolution, SFM succeeded in imaging microvilli, filopodia, single cytoskeletal fibers (microtubules, microfilaments) and vesicles. In addition, as a consequence of cell stimulation upon ionomycin treatment, lamellae formation and the appearance of secretory granules on top of them were observed which indicates the viability of anchored

  19. STEM Summer Academy on the Navajo Reservation

    Science.gov (United States)

    Alexander, C. J.

    2012-12-01

    The US Rosetta Project is the NASA contribution to the International Rosetta Mission, an ESA cornerstone mission to comet Churyumov-Gerasimenko. While the project's outreach efforts span multi-media, and a variety of age and ethnic groups, a special emphasis has been made to find a way to provide meaningful outreach to the reservation communities. Because language preservation is an issue of urgent concern to the reservation communities, and because Rosetta, uniquely among NASA missions, has been named after the notion that keys to missing understanding of elements of the ancient past were found in the language on the original Rosetta stone, the US Rosetta Project has embarked upon outreach with a focus on STEM vocabulary in ancient US languages of the Navajo, Hopi, Ojibwe, and other tribal communities as the project expands. NASA image and science are used and described in the native language, alongside lay English and scientific English curriculum elements. Additionally, science (geology/chemistry/botany/physics) elements drawn from the reservation environment, including geomorphology, geochemistry, soil physics, are included and discussed in the native language as much as possible — with their analogs in other planetary environments (such as Mars). In this paper we will report on the most recent Summer Science Academy [2012], a four week summer course for middle school children, created in collaboration with teachers and administrators in the Chinle Unified School District. The concept of the Academy was initiated in 2011, and the first Academy was conducted shortly thereafter, in June 2011 with 14 children, 3 instructors, and a NASA teacher workshop. The community requested three topics: geology, astronomy, and botany. The 2012 Academy built on the curriculum already developed with more robust field trips, addressed to specific science topics, additional quantitative measurements and activities, with more written material for the cultural components from

  20. Force on Force Modeling with Formal Task Structures and Dynamic Geometry

    Science.gov (United States)

    2017-03-24

    that are nested from Division to Corps to Joint Force Land Component (Operational level of war) and all the way to the Combined Joint Task Force...entities followed during specific phases of the operation. This allowed for filtering of the TOEL to depict only those entities we were concerned with as...provide another way to filter information as the model was being developed from the TOEL. Secondly, for each phase of the operation, the events were

  1. Force production in the rugby union scrum.

    Science.gov (United States)

    Quarrie, K L; Wilson, B D

    2000-04-01

    In this study, we examined the relationship between anthropometric, strength and power characteristics of rugby forwards, their body position when scrummaging, and their ability to apply force when scrummaging. Force applied to an instrumented scrum machine was measured for 56 players, both individually and as scrum packs. Measurements of body position for individuals were made by digitizing videotape records of the trials. Forty players subsequently had their anthropometry assessed and completed several strength and power tests. Body mass, each component of somatotype, maximal anaerobic power developed on a cycle ergometer, and isokinetic knee extension strength correlated significantly with individual scrummaging force. A regression model (P scrum pack to develop technique and coordination as a unit to maximize scrummaging force.

  2. 78 FR 36751 - Meeting of the National Commission on the Structure of the Air Force

    Science.gov (United States)

    2013-06-19

    ... components of the Air Force could be recruited; (e) maintains a peacetime rotation force to support... their registration. The Commission's staff will assign time to oral commenters at the meeting, for no...

  3. Climate forcings and feedbacks

    Science.gov (United States)

    Hansen, James

    1993-01-01

    Global temperature has increased significantly during the past century. Understanding the causes of observed global temperature change is impossible in the absence of adequate monitoring of changes in global climate forcings and radiative feedbacks. Climate forcings are changes imposed on the planet's energy balance, such as change of incoming sunlight or a human-induced change of surface properties due to deforestation. Radiative feedbacks are radiative changes induced by climate change, such as alteration of cloud properties or the extent of sea ice. Monitoring of global climate forcings and feedbacks, if sufficiently precise and long-term, can provide a very strong constraint on interpretation of observed temperature change. Such monitoring is essential to eliminate uncertainties about the relative importance of various climate change mechanisms including tropospheric sulfate aerosols from burning of coal and oil smoke from slash and burn agriculture, changes of solar irradiance changes of several greenhouse gases, and many other mechanisms. The considerable variability of observed temperature, together with evidence that a substantial portion of this variability is unforced indicates that observations of climate forcings and feedbacks must be continued for decades. Since the climate system responds to the time integral of the forcing, a further requirement is that the observations be carried out continuously. However, precise observations of forcings and feedbacks will also be able to provide valuable conclusions on shorter time scales. For example, knowledge of the climate forcing by increasing CFC's relative to the forcing by changing ozone is important to policymakers, as is information on the forcing by CO2 relative to the forcing by sulfate aerosols. It will also be possible to obtain valuable tests of climate models on short time scales, if there is precise monitoring of all forcings and feedbacks during and after events such as a large volcanic eruption

  4. Sparse regularization for force identification using dictionaries

    Science.gov (United States)

    Qiao, Baijie; Zhang, Xingwu; Wang, Chenxi; Zhang, Hang; Chen, Xuefeng

    2016-04-01

    The classical function expansion method based on minimizing l2-norm of the response residual employs various basis functions to represent the unknown force. Its difficulty lies in determining the optimum number of basis functions. Considering the sparsity of force in the time domain or in other basis space, we develop a general sparse regularization method based on minimizing l1-norm of the coefficient vector of basis functions. The number of basis functions is adaptively determined by minimizing the number of nonzero components in the coefficient vector during the sparse regularization process. First, according to the profile of the unknown force, the dictionary composed of basis functions is determined. Second, a sparsity convex optimization model for force identification is constructed. Third, given the transfer function and the operational response, Sparse reconstruction by separable approximation (SpaRSA) is developed to solve the sparse regularization problem of force identification. Finally, experiments including identification of impact and harmonic forces are conducted on a cantilever thin plate structure to illustrate the effectiveness and applicability of SpaRSA. Besides the Dirac dictionary, other three sparse dictionaries including Db6 wavelets, Sym4 wavelets and cubic B-spline functions can also accurately identify both the single and double impact forces from highly noisy responses in a sparse representation frame. The discrete cosine functions can also successfully reconstruct the harmonic forces including the sinusoidal, square and triangular forces. Conversely, the traditional Tikhonov regularization method with the L-curve criterion fails to identify both the impact and harmonic forces in these cases.

  5. Towards Cognitive Component Analysis

    DEFF Research Database (Denmark)

    Hansen, Lars Kai; Ahrendt, Peter; Larsen, Jan

    2005-01-01

    Cognitive component analysis (COCA) is here defined as the process of unsupervised grouping of data such that the ensuing group structure is well-aligned with that resulting from human cognitive activity. We have earlier demonstrated that independent components analysis is relevant for representi...

  6. Elementary Particles and Forces.

    Science.gov (United States)

    Quigg, Chris

    1985-01-01

    Discusses subatomic particles (quarks, leptons, and others) revealed by higher accelerator energies. A connection between forces at this subatomic level has been established, and prospects are good for a description of forces that encompass binding atomic nuclei. Colors, fundamental interactions, screening, camouflage, electroweak symmetry, and…

  7. The forces in Nature

    CERN Multimedia

    CERN AC

    1998-01-01

    The different forces, together with a pictorial analogy of how the exchange of particles works. The table lists the relative strength of the couplings, the quanta associated with the force fields and the bodies of phenomena in which they have a dominant role.

  8. Forces in yeast flocculation

    Science.gov (United States)

    El-Kirat-Chatel, Sofiane; Beaussart, Audrey; Vincent, Stéphane P.; Abellán Flos, Marta; Hols, Pascal; Lipke, Peter N.; Dufrêne, Yves F.

    2015-01-01

    In the baker's yeast Saccharomyces cerevisiae, cell-cell adhesion (``flocculation'') is conferred by a family of lectin-like proteins known as the flocculin (Flo) proteins. Knowledge of the adhesive and mechanical properties of flocculins is important for understanding the mechanisms of yeast adhesion, and may help controlling yeast behaviour in biotechnology. We use single-molecule and single-cell atomic force microscopy (AFM) to explore the nanoscale forces engaged in yeast flocculation, focusing on the role of Flo1 as a prototype of flocculins. Using AFM tips labelled with mannose, we detect single flocculins on Flo1-expressing cells, showing they are widely exposed on the cell surface. When subjected to force, individual Flo1 proteins display two distinct force responses, i.e. weak lectin binding forces and strong unfolding forces reflecting the force-induced extension of hydrophobic tandem repeats. We demonstrate that cell-cell adhesion bonds also involve multiple weak lectin interactions together with strong unfolding forces, both associated with Flo1 molecules. Single-molecule and single-cell data correlate with microscale cell adhesion behaviour, suggesting strongly that Flo1 mechanics is critical for yeast flocculation. These results favour a model in which not only weak lectin-sugar interactions are involved in yeast flocculation but also strong hydrophobic interactions resulting from protein unfolding.

  9. 24 CFR 891.605 - Replacement reserve.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Replacement reserve. 891.605... 8 Assistance § 891.605 Replacement reserve. (a) Establishment of reserve. The Borrower shall establish and maintain a replacement reserve to aid in funding extraordinary maintenance, and repair and...

  10. 24 CFR 891.405 - Replacement reserve.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Replacement reserve. 891.405....405 Replacement reserve. (a) Establishment of reserve. The Owner shall establish and maintain a replacement reserve to aid in funding extraordinary maintenance and repair and replacement of capital items...

  11. Finite element analysis of the effect of force directions on tooth movement in extraction space closure with miniscrew sliding mechanics.

    Science.gov (United States)

    Kojima, Yukio; Kawamura, Jun; Fukui, Hisao

    2012-10-01

    Miniscrews placed in bone have been used as orthodontic anchorage in extraction space closure with sliding mechanics. The movement patterns of the teeth depend on the force directions. To move the teeth in a desired pattern, the appropriate direction of force must be selected. The purpose of this article is to clarify the relationship between force directions and movement patterns. By using the finite element method, orthodontic movements were simulated based on the remodeling law of the alveolar bone. The power arm length and the miniscrew position were varied to change the force directions. When the power arm was lengthened, rotation of the entire maxillary dentition decreased. The posterior teeth were effective for preventing rotation of the anterior teeth through an archwire. In cases of a high position of a miniscrew, bodily tooth movement was almost achieved. The vertical component of the force produced intrusion or extrusion of the entire dentition. Within the limits of the method, the mechanical simulations demonstrated the effect of force direction on movement patterns. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  12. Finger forces in fastball baseball pitching.

    Science.gov (United States)

    Kinoshita, Hiroshi; Obata, Satoshi; Nasu, Daiki; Kadota, Koji; Matsuo, Tomoyuki; Fleisig, Glenn S

    2017-08-01

    Forces imparted by the fingers onto a baseball are the final, critical aspects for pitching, however these forces have not been quantified previously as no biomechanical technology was available. In this study, an instrumented baseball was developed for direct measurement of ball reaction force by individual fingers and used to provide fundamental information on the forces during a fastball pitch. A tri-axial force transducer with a cable having an easily-detachable connector were installed in an official baseball. Data were collected from 11 pitchers who placed the fingertip of their index, middle, ring, or thumb on the transducer, and threw four-seam fastballs to a target cage from a flat mound. For the index and middle fingers, resultant ball reaction force exhibited a bimodal pattern with initial and second peaks at 38-39ms and 6-7ms before ball release, and their amplitudes were around 97N each. The ring finger and thumb produced single-peak forces of approximately 50 and 83N, respectively. Shear forces for the index and middle fingers formed distinct peak at 4-5ms before release, and the peaks summed to 102N; a kinetic source for backspin on the ball. An additional experiment with submaximal pitching effort showed a linear relationship of peak forces with ball velocity. The peak ball reaction force for fastballs exceeded 80% of maximum finger strength measured, suggesting that strengthening of the distal muscles is important both for enhancing performance and for avoiding injuries. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. Forced Normalization: Antagonism Between Epilepsy and Psychosis.

    Science.gov (United States)

    Kawakami, Yasuhiko; Itoh, Yasuhiko

    2017-05-01

    The antagonism between epilepsy and psychosis has been discussed for a long time. Landolt coined the term "forced normalization" in the 1950s to describe psychotic episodes associated with the remission of seizures and disappearance of epileptiform activity on electroencephalograms in individuals with epilepsy. Since then, neurologists and psychiatrists have been intrigued by this phenomenon. However, although collaborative clinical studies and basic experimental researches have been performed, the mechanism of forced normalization remains unknown. In this review article, we present a historical overview of the concept of forced normalization, and discuss potential pathogenic mechanisms and clinical diagnosis. We also discuss the role of dopamine, which appears to be a key factor in the mechanism of forced normalization. Copyright © 2017 Elsevier Inc. All rights reserved.

  14. Changing trends in the labor force: a survey

    OpenAIRE

    Riccardo DiCecio; Kristie M. Engemann; Michael T. Owyang; Christopher H. Wheeler

    2008-01-01

    The composition of the American workforce has changed dramatically over the past half century as a result of both the emergence of married women as a substantial component of the labor force and an increase in the number of minority workers. The aging of the population has contributed to this change as well. In this paper, the authors review the evidence of changing labor force participation rates, estimate the trends in labor force participation over the past 50 years, and find that aggregat...

  15. Cognitive Reserve: Implications for Assessment and Intervention

    OpenAIRE

    Stern, Yaakov

    2013-01-01

    The concept of reserve is used to explain the observation that some individuals function better than others in the presence of brain pathology. This paper reviews the concept of reserve from its theoretical basis to the implication of reserve for clinical practice. A distinction between brain reserve, referring to individual differences in the anatomic substrate, and cognitive reserve, referring to differences in the flexibility or adaptivity of cognitive networks, is useful. Epidemiologic ev...

  16. Some explicit expressions for the probability distribution of force ...

    Indian Academy of Sciences (India)

    Recently, empirical investigations have suggested that the components of contact forces follow the exponential distribution. However, explicit expressions for the probability distribution of the corresponding force magnitude have not been known and only approximations have been used in the literature. In this note, for the ...

  17. How Tidal Forces Cause Ocean Tides in the Equilibrium Theory

    Science.gov (United States)

    Ng, Chiu-king

    2015-01-01

    We analyse why it is erroneous to think that a tidal bulge is formed by pulling the water surface directly up by a local vertical tidal force. In fact, ocean tides are caused by the global effect of the horizontal components of the tidal forces.

  18. Air Force Command and Control: The Need for Increased Adaptability

    Science.gov (United States)

    2012-07-01

    Commander, General Michael Moseley, Coalition Forces Land Component Commander, Lieutenant General Da­ 76 vid McKiernan, Coalition Forces Maritime...Command and Control of Space Assets The unique characteristics of systems operating in the ulti­ mate high ground present special considerations for the C2

  19. Atomic Force Microscope Mediated Chromatography

    Science.gov (United States)

    Anderson, Mark S.

    2013-01-01

    The atomic force microscope (AFM) is used to inject a sample, provide shear-driven liquid flow over a functionalized substrate, and detect separated components. This is demonstrated using lipophilic dyes and normal phase chromatography. A significant reduction in both size and separation time scales is achieved with a 25-micron-length column scale, and one-second separation times. The approach has general applications to trace chemical and microfluidic analysis. The AFM is now a common tool for ultra-microscopy and nanotechnology. It has also been demonstrated to provide a number of microfluidic functions necessary for miniaturized chromatography. These include injection of sub-femtoliter samples, fluidic switching, and sheardriven pumping. The AFM probe tip can be used to selectively remove surface layers for subsequent microchemical analysis using infrared and tip-enhanced Raman spectroscopy. With its ability to image individual atoms, the AFM is a remarkably sensitive detector that can be used to detect separated components. These diverse functional components of microfluidic manipulation have been combined in this work to demonstrate AFM mediated chromatography. AFM mediated chromatography uses channel-less, shear-driven pumping. This is demonstrated with a thin, aluminum oxide substrate and a non-polar solvent system to separate a mixture of lipophilic dyes. In conventional chromatographic terms, this is analogous to thin-layer chromatography using normal phase alumina substrate with sheardriven pumping provided by the AFM tip-cantilever mechanism. The AFM detection of separated components is accomplished by exploiting the variation in the localized friction of the separated components. The AFM tip-cantilever provides the mechanism for producing shear-induced flows and rapid pumping. Shear-driven chromatography (SDC) is a relatively new concept that overcomes the speed and miniaturization limitations of conventional liquid chromatography. SDC is based on a

  20. 1979 Reserve Force Studies Surveys: Survey Design, Sample Design and Administrative Procedures,

    Science.gov (United States)

    1981-08-01

    Dental Service 17 Reception Cnt. 11Other 46 Total 2914 The heterogeneity of the units poses a problem for a unit sampling plan. Namely, if the...regular schoel or collae 04. What is tha ZIP Code ZIP Cods thats you think you will ama c0oMsil In tha futura? If af tha placa whare your highest grade

  1. Environmental Assessment: Construction and Operation of Headquarters Air Force Reserve Command Campus

    Science.gov (United States)

    2010-01-21

    calling in the Ocmulgee floodplain on Robins AFB), the bronze frog ( Rana clamitans clamitans), the bull frog ( Rana catesbeiana ), and the carpenter...frog ( Rana virgatipes) (Wharton, 1978). Reptiles in this habitat include the rainbow snake, cottonmouth, and yellow-bellied turtle (Chrysemys scripta

  2. Annual Report of the Secretary of Defense on Reserve Forces for Fiscal Year 1975

    Science.gov (United States)

    1976-06-08

    Color Guards wore operational, prseantint, a strong poaiti~e image at the’ grass-roots l- ovul of the Army’c contribuP~2ons to our mation’s ’heritage...MCM ships nearly doubled during Fiscal Year 1974. The percentage of units reporting Cl and C2 was 26% on I July 1974 and increased to 50% on I July...Coronado, Ca. -consisttng uf 5 PTFs, 2 PCFs an-d ’MSSCs’ and COSRVIVOI 11’at Mare I’sland, Ca.#. coý.$Jstin~ 01 14 PBRs , 9 -ATCs an~d I CCB. Ove~rall

  3. Installation Restoration Program Records Search for Twin Cities Air Force Reserve Base, Minnesota.

    Science.gov (United States)

    1983-03-01

    Sandstone, white, mediu poorly sorted and silty.!0-80+ Galesville Sandstone Sandstone, yellow to whi grained, poorly cemented Eau Claire Sandstone 0-150...Quality Data All potable water for Twin Cities AFRB is obtained from the City of Minneapolis. The potable water is supplied to the base by one 12-inch main...34 Exploration drilling, testing, and design of well fields for potable water supply with an installed capacity of over 65 mgd. " Determination of

  4. Installation Restoration Program Phase 1 - Records Search, O’Hare Air Reserve Forces Facility, Illinois

    Science.gov (United States)

    1983-12-01

    Chemical Engineering, 1979, University of Notre Dame B.A. in Art , 1979, University of Notre Dame M.S. in Chemical Engineering, 1980, University of...IMMEDIATELY EAST OF SOUTH P0L AREA Date of Operation or Occurrence: PRIOR TO 1970 Owner/Operator: NARE ARFF Comests /escription: VACUUM TUBE DISPOSED OF INTO...Engineering, 1979, University of Notre Dame S.A. in Art , 1979, University of Notre Dame M.S. in Chemical Engineering, 1980, University of Notre Dame

  5. OOTW Force Design Tools

    Energy Technology Data Exchange (ETDEWEB)

    Bell, R.E.; Hartley, D.S.III; Packard, S.L.

    1999-05-01

    This report documents refined requirements for tools to aid the process of force design in Operations Other Than War (OOTWs). It recommends actions for the creation of one tool and work on other tools relating to mission planning. It also identifies the governmental agencies and commands with interests in each tool, from whom should come the user advisory groups overseeing the respective tool development activities. The understanding of OOTWs and their analytical support requirements has matured to the point where action can be taken in three areas: force design, collaborative analysis, and impact analysis. While the nature of the action and the length of time before complete results can be expected depends on the area, in each case the action should begin immediately. Force design for OOTWs is not a technically difficult process. Like force design for combat operations, it is a process of matching the capabilities of forces against the specified and implied tasks of the operation, considering the constraints of logistics, transport and force availabilities. However, there is a critical difference that restricts the usefulness of combat force design tools for OOTWs: the combat tools are built to infer non-combat capability requirements from combat capability requirements and cannot reverse the direction of the inference, as is required for OOTWs. Recently, OOTWs have played a larger role in force assessment, system effectiveness and tradeoff analysis, and concept and doctrine development and analysis. In the first Quadrennial Defense Review (QDR), each of the Services created its own OOTW force design tool. Unfortunately, the tools address different parts of the problem and do not coordinate the use of competing capabilities. These tools satisfied the immediate requirements of the QDR, but do not provide a long-term cost-effective solution.

  6. Offshore fresh groundwater reserves as a global phenomenon

    Science.gov (United States)

    Post, Vincent E. A.; Groen, Jacobus; Kooi, Henk; Person, Mark; Ge, Shemin; Edmunds, W. Mike

    2013-12-01

    The flow of terrestrial groundwater to the sea is an important natural component of the hydrological cycle. This process, however, does not explain the large volumes of low-salinity groundwater that are found below continental shelves. There is mounting evidence for the global occurrence of offshore fresh and brackish groundwater reserves. The potential use of these non-renewable reserves as a freshwater resource provides a clear incentive for future research. But the scope for continental shelf hydrogeology is broader and we envisage that it can contribute to the advancement of other scientific disciplines, in particular sedimentology and marine geochemistry.

  7. Competency-Based Assignment & Promotion to Meet Air Force Senior Leader Requirements

    National Research Council Canada - National Science Library

    Steele, Jr., Robert G; Fletcher, Kelly E; Nadoiski, William F; Buckman, Emily A; Oliver, Jr., Stephen W

    2006-01-01

    .... The third component, competencies, are occupational skill sets and enduring leadership competencies Air Force leaders develop as they progress along the tactical, operational and strategic levels...

  8. Factor Structure of the Air Force Officer Qualifying Test: Analysis and Comparison

    National Research Council Canada - National Science Library

    Carreta, Thomas

    1998-01-01

    The Air Force Officer Qualifying Test (AFOQT) is used to qualify men and women for commissions in the Air Force, classify them for pilot and navigator jobs, and award Reserve Officer Training Corps (ROTC) scholarships...

  9. Forced magnetic reconnection

    Science.gov (United States)

    Vekstein, G.

    2017-10-01

    This is a tutorial-style selective review explaining basic concepts of forced magnetic reconnection. It is based on a celebrated model of forced reconnection suggested by J. B. Taylor. The standard magnetohydrodynamic (MHD) theory of this process has been pioneered by Hahm & Kulsrud (Phys. Fluids, vol. 28, 1985, p. 2412). Here we also discuss several more recent developments related to this problem. These include energetics of forced reconnection, its Hall-mediated regime, and nonlinear effects with the associated onset of the secondary tearing (plasmoid) instability.

  10. Rate of force development

    DEFF Research Database (Denmark)

    Maffiuletti, Nicola A; Aagaard, Per; Blazevich, Anthony J

    2016-01-01

    development and to discuss various methodological considerations inherent to its evaluation for research and clinical purposes. Rate of force development (1) seems to be mainly determined by the capacity to produce maximal voluntary activation in the early phase of an explosive contraction (first 50-75 ms......The evaluation of rate of force development during rapid contractions has recently become quite popular for characterising explosive strength of athletes, elderly individuals and patients. The main aims of this narrative review are to describe the neuromuscular determinants of rate of force...

  11. Application of principal component analysis enables to effectively find important physical variables for optimization of fluid bed granulator conditions.

    Science.gov (United States)

    Otsuka, Tomoko; Iwao, Yasunori; Miyagishima, Atsuo; Itai, Shigeru

    2011-05-16

    Principal component analysis was applied to effectively optimize the operational conditions of a fluidized bed granulator for preparing granules with excellent compaction and tablet physical properties. The crucial variables that affect the properties of the granules, their compactability and the resulting tablet properties were determined through analysis of a series of granulation and tabletting experiments. Granulation was performed while the flow rate and concentration of the binder were changed as independent operational variables, according to a two-factor central composite design. Thirteen physicochemical properties of granules and tablets were examined: powder properties (particle size, size distribution width, Carr's index, Hausner ratio and aspect ratio), compactability properties (pressure transmission ratio, die wall force and ejection force) and tablet properties (tensile strength, friability, disintegration time, weight variation and drug content uniformity). Principal component analysis showed that the pressure transmission ratio, die wall force and Carr's index were the most important variables in granule preparation. Multiple regression analysis also confirmed these results. Furthermore, optimized operational conditions obtained from the multiple regression analysis enabled the production of granules with desirable properties for tabletting. This study presents the first use of principle component analysis for identifying and successfully predicting the most important variables in the process of granulation and tabletting. Copyright © 2011 Elsevier B.V. All rights reserved.

  12. Variable Acceleration Force Calibration System (VACS)

    Science.gov (United States)

    Rhew, Ray D.; Parker, Peter A.; Johnson, Thomas H.; Landman, Drew

    2014-01-01

    Conventionally, force balances have been calibrated manually, using a complex system of free hanging precision weights, bell cranks, and/or other mechanical components. Conventional methods may provide sufficient accuracy in some instances, but are often quite complex and labor-intensive, requiring three to four man-weeks to complete each full calibration. To ensure accuracy, gravity-based loading is typically utilized. However, this often causes difficulty when applying loads in three simultaneous, orthogonal axes. A complex system of levers, cranks, and cables must be used, introducing increased sources of systematic error, and significantly increasing the time and labor intensity required to complete the calibration. One aspect of the VACS is a method wherein the mass utilized for calibration is held constant, and the acceleration is changed to thereby generate relatively large forces with relatively small test masses. Multiple forces can be applied to a force balance without changing the test mass, and dynamic forces can be applied by rotation or oscillating acceleration. If rotational motion is utilized, a mass is rigidly attached to a force balance, and the mass is exposed to a rotational field. A large force can be applied by utilizing a large rotational velocity. A centrifuge or rotating table can be used to create the rotational field, and fixtures can be utilized to position the force balance. The acceleration may also be linear. For example, a table that moves linearly and accelerates in a sinusoidal manner may also be utilized. The test mass does not have to move in a path that is parallel to the ground, and no re-leveling is therefore required. Balance deflection corrections may be applied passively by monitoring the orientation of the force balance with a three-axis accelerometer package. Deflections are measured during each test run, and adjustments with respect to the true applied load can be made during the post-processing stage. This paper will

  13. Explosive Components Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The 98,000 square foot Explosive Components Facility (ECF) is a state-of-the-art facility that provides a full-range of chemical, material, and performance analysis...

  14. Impact of ground control on mining reserve estimation

    Energy Technology Data Exchange (ETDEWEB)

    Duncan, G. [AMC Resource Consultants Pty Ltd., Sydney, NSW (Australia)

    2001-07-01

    The estimation of coal resources and reserves is an important and often critical component of the assessment of a mining operation or project. An accurate estimation of reserves in particular is essential for many stages of a mining project - from initial evaluation of the project potential, commitment to a mine development, approval of capital expenditure and/or project finance, through to mine valuation for sale or public listing. Accurate estimation of reserves is also a compulsory reporting requirement for public listed companies as set out in the Australian Stock Exchange (ASX), listing rules. Under these rules, resources and reserves are reported under the JOC Code that incorporates the 'Australian Code for Reporting Identified Coal Resources and Reserves'. These rules are now also used more frequently for non public listed companies. A number of geotechnical parameters play an important role in the process of converting insitu resources to economically recoverable reserves. Whilst these parameters play a role in opencut mining, this paper covers a number of key geotechnical issues that influence the estimation of underground reserves. 11 figs.

  15. On estimating intraventricular hemodynamic forces from endocardial dynamics: A comparative study with 4D flow MRI.

    Science.gov (United States)

    Pedrizzetti, Gianni; Arvidsson, Per M; Töger, Johannes; Borgquist, Rasmus; Domenichini, Federico; Arheden, Håkan; Heiberg, Einar

    2017-07-26

    Intraventricular pressure gradients or hemodynamic forces, which are their global measure integrated over the left ventricular volume, have a fundamental importance in ventricular function. They may help revealing a sub-optimal cardiac function that is not evident in terms of tissue motion, which is naturally heterogeneous and variable, and can influence cardiac adaptation. However, hemodynamic forces are not utilized in clinical cardiology due to the unavailability of simple non-invasive measurement tools. Hemodynamic forces depend on the intraventricular flow; nevertheless, most of them are imputable to the dynamics of the endocardial flow boundary and to the exchange of momentum across the mitral and aortic orifices. In this study, we introduce a simplified model based on first principles of fluid dynamics that allows estimating hemodynamic forces without knowing the velocity field inside the LV. The model is validated with 3D phase-contrast MRI (known as 4D flow MRI) in 15 subjects, (5 healthy and 10 patients) using the endocardial surface reconstructed from the three standard long-axis projections. Results demonstrate that the model provides consistent estimates for the base-apex component (mean correlation coefficient r=0.77 for instantaneous values and r=0.88 for root mean square) and good estimates of the inferolateral-anteroseptal component (r=0.50 and 0.84, respectively). The present method represents a potential integration to the existing ones quantifying endocardial deformation in MRI and echocardiography to add a physics-based estimation of the corresponding hemodynamic forces. These could help the clinician to early detect sub-clinical diseases and differentiate between different cardiac dysfunctional states. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. Assessment of secondary aluminum reserves of nations

    DEFF Research Database (Denmark)

    Maung, Kyaw Nyunt; Yoshida, Tomoharu; Liu, Gang

    2017-01-01

    A classification framework of the secondary resources was applied to evaluate the framework's applicability and to assess secondary aluminum reserves for 19 countries. Estimated amounts of secondary aluminum reserves in 2010 were 85 million tonnes in the United States, 65 million tonnes in China......, 29 million tonnes in Japan, and 413 million tonnes globally. For the United States, its secondary reserves are larger than its primary reserves, although the global primary reserves (28,000 million tonnes) are much larger than the estimated secondary reserves. Considerable amounts of secondary...

  17. Space laser components reliability

    OpenAIRE

    Riede, Wolfgang; Schroeder, Helmut

    2015-01-01

    Space environment presents unique challenges for operation of optics and optical coatings as part of laser systems. Besides testing components and sub-systems on the component qualification level, the extended testing of complete laser systems like flight modules under acceptance level conditions is an effective way to determine the reliability and long term stability, mitigating the mission risk. Hence, optics as part of high power space laser systems have to be extensively tested in view...

  18. Refractory alloy component fabrication

    International Nuclear Information System (INIS)

    Young, W.R.

    1984-01-01

    Purpose of this report is to describe joining procedures, primarily welding techniques, which were developed to construct reliable refractory alloy components and systems for advanced space power systems. Two systems, the Nb-1Zr Brayton Cycle Heat Receiver and the T-111 Alloy Potassium Boiler Development Program, are used to illustrate typical systems and components. Particular emphasis is given to specific problems which were eliminated during the development efforts. Finally, some thoughts on application of more recent joining technology are presented. 78 figures

  19. Component fragility research program

    International Nuclear Information System (INIS)

    Tsai, N.C.; Mochizuki, G.L.; Holman, G.S.

    1989-11-01

    To demonstrate how ''high-level'' qualification test data can be used to estimate the ultimate seismic capacity of nuclear power plant equipment, we assessed in detail various electrical components tested by the Pacific Gas ampersand Electric Company for its Diablo Canyon plant. As part of our Phase I Component Fragility Research Program, we evaluated seismic fragility for five Diablo Canyon components: medium-voltage (4kV) switchgear; safeguard relay board; emergency light battery pack; potential transformer; and station battery and racks. This report discusses our Phase II fragility evaluation of a single Westinghouse Type W motor control center column, a fan cooler motor controller, and three local starters at the Diablo Canyon nuclear power plant. These components were seismically qualified by means of biaxial random motion tests on a shaker table, and the test response spectra formed the basis for the estimate of the seismic capacity of the components. The seismic capacity of each component is referenced to the zero period acceleration (ZPA) and, in our Phase II study only, to the average spectral acceleration (ASA) of the motion at its base. For the motor control center, the seismic capacity was compared to the capacity of a Westinghouse Five-Star MCC subjected to actual fragility tests by LLNL during the Phase I Component Fragility Research Program, and to generic capacities developed by the Brookhaven National Laboratory for motor control center. Except for the medium-voltage switchgear, all of the components considered in both our Phase I and Phase II evaluations were qualified in their standard commercial configurations or with only relatively minor modifications such as top bracing of cabinets. 8 refs., 67 figs., 7 tabs

  20. Impact test of components

    International Nuclear Information System (INIS)

    Borsoi, L.; Buland, P.; Labbe, P.

    1987-01-01

    Stops with gaps are currently used to support components and piping: it is simple, low cost, efficient and permits free thermal expansion. In order to keep the nonlinear nature of stops, such design is often modeled by beam elements (for the component) and nonlinear springs (for the stops). This paper deals with the validity and the limits of these models through the comparison of computational and experimental results. The experimental results come from impact laboratory tests on a simplified mockup. (orig.)

  1. Comparative investigations of tablet crushing force testers

    DEFF Research Database (Denmark)

    Sonnergaard, Jørn; Jensen, C.G.; Poulsen, L.

    2005-01-01

    The performance of 16 tablet breaking force testers was evaluated in terms of accuracy, reproducibility and repeatability. Three tablet formulations with different plastic or brittle deformation mechanisms and with target breaking forces of 50, 100 and 150 N were tested. Statistically significant...... by the concept of components of variance was 5-7 % depending on the model tablet excipient. The standard deviation within testers (repeatability) was affected by the type of model formulation showing increasing variability with increasing brittleness of the compressed material. No specific effect of altering...

  2. Security force-adversary engagement simulation

    International Nuclear Information System (INIS)

    Bennett, H.A.

    1975-01-01

    A dynamic simulation of a security force-adversary engagement has been developed to obtain a better understanding of the complexities involved in security systems. Factors affecting engagement outcomes were identified and interrelated to represent an ambush of an escorted nuclear fuel truck convoy by an adversary group. Other forms of engagement such as assault and skirmish also can be simulated through suitable parameter changes. The dynamic model can provide a relative evaluation of changes in security force levels, equipment, training, and tactics. Continued application and subsequent refinements of the model are expected to augment the understanding of component interaction within a guard-based security system

  3. Objective Force Warrior

    National Research Council Canada - National Science Library

    Shisler, Vernon

    2001-01-01

    This presentation concerns technology aimed at the dismounted soldier, Capstone demonstrations for FY06-07, fielding in the Objective Force time frame, strong interest in a lightweight weapon family...

  4. Packing force data correlations

    International Nuclear Information System (INIS)

    Heiman, S.M.

    1994-01-01

    One of the issues facing valve maintenance personnel today deals with an appropriate methodology for installing and setting valve packing that will minimize leak rates, yet ensure functionality of the the valve under all anticipated operating conditions. Several variables can affect a valve packing's ability to seal, such as packing bolt torque, stem finish, and lubrication. Stem frictional force can be an excellent overall indicator of some of the underlying conditions that affect the sealing characteristics of the packing and the best parameter to use when adjusting the packing. This paper addresses stem friction forces, analytically derives the equations related to these forces, presents a methodology for measuring these forces on valve stems, and attempts to correlate the data directly to the underlying variables

  5. Institutionalizing Security Force Assistance

    National Research Council Canada - National Science Library

    Binetti, Michael R

    2008-01-01

    .... It looks at the manner in which security assistance guidance is developed and executed. An examination of national level policy and the guidance from senior military and civilian leaders highlights the important role of Security Force Assistance...

  6. Hanscom Air Force Base

    Data.gov (United States)

    Federal Laboratory Consortium — MIT Lincoln Laboratory occupies 75 acres (20 acres of which are MIT property) on the eastern perimeter of Hanscom Air Force Base, which is at the nexus of Lexington,...

  7. On the fifth forces

    Science.gov (United States)

    Treder, Hans-Jürgen

    1991-03-01

    We discuss the possibility of “fifth forces” in relativistic gravitation theories of fourth order. The fifth force may be an analog to the “weak forces” in the theories of electroweak interactions.

  8. Bow Crushing Forces

    DEFF Research Database (Denmark)

    Pedersen, Preben Terndrup

    1996-01-01

    The purpose of these notes is to present a basis for the estimation of the internal collision forces between conventinal merchant vessels and large volume offshore structures in the form of gravity-supported offshore installations and bridges crossing international shipping routes.The main emphasis...... is on the presentation of impact loads on fixed offshore structures due to bow collisions. The crushing forces are determined as functions of vessels size, vessels speed, bow profile, collision angles and eccentric impacts....

  9. Security Force Assistance

    Science.gov (United States)

    2009-05-01

    Group 8-59. Cultures may be individualistic or collectivist in their orientation. An individualist culture is one in which the ties between...relatively little weight on offensive and defensive operations from a U.S. perspective . However, when U.S. forces accompany foreign security forces (FSF) in...precedence when conducting SFA. As a result, the brigade combat team (BCT) may be a supported command from a U.S. perspective as well as acting as

  10. Cognitive Reserve: Implications for Assessment and Intervention

    Science.gov (United States)

    Stern, Yaakov

    2014-01-01

    The concept of reserve is used to explain the observation that some individuals function better than others in the presence of brain pathology. This paper reviews the concept of reserve from its theoretical basis to the implication of reserve for clinical practice. A distinction between brain reserve, referring to individual differences in the anatomic substrate, and cognitive reserve, referring to differences in the flexibility or adaptivity of cognitive networks, is useful. Epidemiologic evidence indicates that a set of life exposures including higher educational and occupational attainment, and engaging in leisure activities is associated with a lower risk of incident dementia, suggesting that these life exposures may enhance cognitive reserve. This provides a basis for controlled clinical studies can test specific exposures that may enhance reserve. The concept of cognitive reserve also has important implications for clinical practice in terms of diagnosis and prognosis. PMID:23941972

  11. Clipboard: Unraveling the mystery of cognitive reserve

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Biosciences; Volume 40; Issue 2. Clipboard : Unraveling the mystery of cognitive reserve ... Keywords. Aging; Alzheimer's; bilingualism; cognitive reserve; dementia; Down's; education; enrichment; environment; learning; long term potentiation; LTP; memory; neuroepigenetics; plasticity ...

  12. 5 CFR 330.610 - [Reserved

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false [Reserved] 330.610 Section 330.610 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS RECRUITMENT, SELECTION, AND... Employees § 330.610 [Reserved] ...

  13. 5 CFR 330.603 - [Reserved

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false [Reserved] 330.603 Section 330.603 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS RECRUITMENT, SELECTION, AND... Employees § 330.603 [Reserved] ...

  14. Dollar as the world's reserve currency: Challenges and prospects

    Directory of Open Access Journals (Sweden)

    Kovačević Radovan

    2014-01-01

    Full Text Available The US dollar gained the status of the world's reserve currency in the Bretton Woods system and has preserved it until the present day. Such position in international finance entails both advantages and disadvantages to the USA as the issuer of this currency, and to the rest of the world using it in trading, as store of value, and for the purpose of various financial operations and transactions. After the collapse of the Bretton Woods system, the regime of fixed FX rates was replaced by floating FX rates. Yet, regardless of this change, the dollar kept its role of the world's reserve currency. Numerous banking and currency crises following the transfer to the floating FX rates regime, along with the shifts in international capital flows, forced the developing countries and countries in transition to increase their FX reserves. In the tendency to store their value, central banks usually invest them into US Treasury securities, as liquid and reliable assets. However, due to the risk incurred by the reliance on a single national currency in the role of the world's reserve currency, there have been many proposals to reform the international monetary system. According to the current global tendencies, the most serious candidates for acquiring the status of the world's reserve currency in the future are the dollar, the euro, and the Chinese yuan.

  15. Reserving by detailed conditioning on individual claim

    Science.gov (United States)

    Kartikasari, Mujiati Dwi; Effendie, Adhitya Ronnie; Wilandari, Yuciana

    2017-03-01

    The estimation of claim reserves is an important activity in insurance companies to fulfill their liabilities. Recently, reserving method of individual claim have attracted a lot of interest in the actuarial science, which overcome some deficiency of aggregated claim method. This paper explores the Reserving by Detailed Conditioning (RDC) method using all of claim information for reserving with individual claim of liability insurance from an Indonesian general insurance company. Furthermore, we compare it to Chain Ladder and Bornhuetter-Ferguson method.

  16. Resistive force theory for sand swimming

    Science.gov (United States)

    Ding, Yang; Maladen, Ryan; Li, Chen; Goldman, Daniel

    2009-11-01

    We discuss a resistive force theoryfootnotetextMaladen et. al, Science, 325, 314, 2009 that predicts the ratio of forward speed to wave speed (wave efficiency, η) of the sandfish lizard as it swims in granular media of varying volume fraction φ using a sinusoidal traveling wave body motion. In experiment η 0.5 independent of φ and is intermediate between η 0.2 for low Re Newtonian fluid undulatory swimmers like nematodes and η 0.9 for undulatory locomotion on a deformable surface. To predict η in granular media, we developed a resistive force model which balances thrust and drag force over the animal profile. We approximate the drag forces by measuring the force on a cylinder (a ``segment'' of the sandfish) oriented at different angles relative to the displacement direction. The model correctly predicts that η is independent of φ because the ratio of thrust to drag is independent of φ. The thrust component of the drag force is relatively larger in granular media than in low Re fluids, which explains why η in frictional granular media is greater than in viscous fluids.

  17. Corticomuscular Coherence with Low-Level Forces

    Directory of Open Access Journals (Sweden)

    Chakarov V.

    2009-12-01

    Full Text Available The present study was aimed at investigating the corticomuscular synchronization in beta- (15-30 Hz and gamma-range (30-45 Hz during isometric compensation of low-level forces. It is still unknown to what extent the synchronization processes in these frequency ranges can coexist or influence each other when the static component only is modulated in a dynamic stimulation pattern. We investigated the corticomuscular coherence (CMC, as well as the cortical spectral power (SP during a visuomotor task, where 8%, 16% and 24% of the maximal voluntary contraction (MVC were used. Seven healthy right-handed female subjects compensated isometrically the different dynamic forces with their right index finger. EEG was recorded from 52 scalp positions and belly-tendon bipolar EMG from the first dorsal interosseus muscle (FDI. Under the three conditions investigated, the beta- and gamma-range CMC existed in parallel. They behaved in a different manner: while the beta-range coherence increased linearly during higher force application, the gamma-range CMC was not significantly modulated by the force levels. Our results suggest that although gamma-range CMC is functionally associated to the isometric compensation of dynamic forces, broad beta-range CMC can fulfill functions of motor control simultaneously different when low-level forces are applied.

  18. Poverty and corruption compromise tropical forest reserves.

    Science.gov (United States)

    Wright, S Joseph; Sanchez-Azofeifa, G Arturo; Portillo-Quintero, Carlos; Davies, Diane

    2007-07-01

    We used the global fire detection record provided by the satellite-based Moderate Resolution Imaging Spectroradiometer (MODIS) to determine the number of fires detected inside 823 tropical and subtropical moist forest reserves and for contiguous buffer areas 5, 10, and 15 km wide. The ratio of fire detection densities (detections per square kilometer) inside reserves to their contiguous buffer areas provided an index of reserve effectiveness. Fire detection density was significantly lower inside reserves than in paired, contiguous buffer areas but varied by five orders of magnitude among reserves. The buffer: reserve detection ratio varied by up to four orders of magnitude among reserves within a single country, and median values varied by three orders of magnitude among countries. Reserves tended to be least effective at reducing fire frequency in many poorer countries and in countries beset by corruption. Countries with the most successful reserves include Costa Rica, Jamaica, Malaysia, and Taiwan and the Indonesian island of Java. Countries with the most problematic reserves include Cambodia, Guatemala, Paraguay, and Sierra Leone and the Indonesian portion of Borneo. We provide fire detection density for 3964 tropical and subtropical reserves and their buffer areas in the hope that these data will expedite further analyses that might lead to improved management of tropical reserves.

  19. 24 CFR 572.125 - Replacement reserves.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 3 2010-04-01 2010-04-01 false Replacement reserves. 572.125...) Homeownership Program Requirements-Implementation Grants § 572.125 Replacement reserves. (a) Purpose. A single replacement reserve may be established for the homeownership program only if HUD determines it is necessary to...

  20. 24 CFR 880.602 - Replacement reserve.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Replacement reserve. 880.602... Replacement reserve. (a) A replacement reserve must be established and maintained in an interest-bearing account to aid in funding extraordinary maintenance and repair and replacement of capital items. (1) Part...

  1. 24 CFR 891.745 - Replacement reserve.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Replacement reserve. 891.745... and Individuals-Section 162 Assistance § 891.745 Replacement reserve. The general requirements for the replacement reserve are provided in § 891.605. For projects funded under §§ 891.655 through 891.790, the...

  2. Reserve evaluation of minerals at NUCLEBRAS

    International Nuclear Information System (INIS)

    Marques, J.P.M.; Guerra, P.A.G.; Vinha, C.A.G. da

    1980-10-01

    The method used for the reserve evaluation of minerals, particularly of uranium, as used worldwide, and specially at NUCLEBRAS is described. This is done through a series of procedures envolving basic definitions, reserve evaluation methods (conventional, statistical and geoestatistical), data management, use of computer systems, classification and evaluation of reserves. (Author) [pt

  3. John Brainerd and the First Indian Reservation.

    Science.gov (United States)

    Harper, Susanne Banta

    1979-01-01

    Describes the humanitarian founding in 1758 of the nation's first reservation--the Brotherton reservation for New Jersey's Lenni Lenape (Algonquin) Indians. The people were demoralized, sick, and decimated in numbers; and so the venture failed. In 1801 those few remaining sold the reservation and moved to join related tribes in New York. (DS)

  4. Forced air heat sink apparatus

    Science.gov (United States)

    Rippel, Wally E. (Inventor)

    1989-01-01

    A high efficiency forced air heat sink assembly employs a split feed transverse flow configuration to minimize the length of the air flow path through at least two separated fin structures. Different embodiments use different fin structure material configurations including honeycomb, corrugated and serpentine. Each such embodiment uses a thermally conductive plate having opposed exterior surfaces; one for receiving a component to be cooled and one for receiving the fin structures. The serpentine structured fin embodiment employs a plurality of fin supports extending from the plate and forming a plurality of channels for receiving the fin structures. A high thermal conductivity bondant, such as metal-filled epoxy, may be used to bond the fin structures to either the plate or the fin supports. Dip brazing and soldering may also be employed depending upon the materials selected.

  5. Vector field statistical analysis of kinematic and force trajectories.

    Science.gov (United States)

    Pataky, Todd C; Robinson, Mark A; Vanrenterghem, Jos

    2013-09-27

    When investigating the dynamics of three-dimensional multi-body biomechanical systems it is often difficult to derive spatiotemporally directed predictions regarding experimentally induced effects. A paradigm of 'non-directed' hypothesis testing has emerged in the literature as a result. Non-directed analyses typically consist of ad hoc scalar extraction, an approach which substantially simplifies the original, highly multivariate datasets (many time points, many vector components). This paper describes a commensurately multivariate method as an alternative to scalar extraction. The method, called 'statistical parametric mapping' (SPM), uses random field theory to objectively identify field regions which co-vary significantly with the experimental design. We compared SPM to scalar extraction by re-analyzing three publicly available datasets: 3D knee kinematics, a ten-muscle force system, and 3D ground reaction forces. Scalar extraction was found to bias the analyses of all three datasets by failing to consider sufficient portions of the dataset, and/or by failing to consider covariance amongst vector components. SPM overcame both problems by conducting hypothesis testing at the (massively multivariate) vector trajectory level, with random field corrections simultaneously accounting for temporal correlation and vector covariance. While SPM has been widely demonstrated to be effective for analyzing 3D scalar fields, the current results are the first to demonstrate its effectiveness for 1D vector field analysis. It was concluded that SPM offers a generalized, statistically comprehensive solution to scalar extraction's over-simplification of vector trajectories, thereby making it useful for objectively guiding analyses of complex biomechanical systems. © 2013 Published by Elsevier Ltd. All rights reserved.

  6. The determination of contribution of emotional intelligence and parenting styles components to predicts positive psychological components

    Directory of Open Access Journals (Sweden)

    hosein Ebrahimi moghadam

    2015-05-01

    Full Text Available Background: Since the essential of positive psychological components, as compliment of deficiency oriented approaches, has begun in recent days,we decided to take into account this new branch of psychology which scientifically considers studying forces of human, as well as because of the importance of this branch of psychology, we also tried to search the contribution of emotional intelligence and parenting styles components to predict positive psychological components. Materials and Methods:In this cross sectional study 200 psychological students of Azad university (Rudehen branch selected using cluster sampling method. Then they were estimated by Bradbery and Grivers emotional intelligence questionnaire , Bamrind parenting styles and Rajayi et al positive psychological components questionnaire. Research data was analyzed using descriptive statistics (mean and standard deviation, inferential statistics (multiple regression and Pierson correlation coefficient and SPSS software. Results:Among the components of emotional intelligence, the component of emotional self consciousness (β=0.464 had the greatest predictable , and reaction leadership showed no predictability in this research between parenting styles , authority parenting styles had positive significance relationship with positive psychological components. And no significant relationship was found between despot parenting styles and positive psychological components. Conclusion: Regarding the results of this research and importance of positive psychological components, it is suggested to treat the emotional intelligence from childhood and to learn it to parents and remind them the parenting way to decrease the satisfaction of individuals which leads to promotion of society mental health.

  7. Encyclopedia of Software Components

    Science.gov (United States)

    Warren, Lloyd V. (Inventor); Beckman, Brian C. (Inventor)

    1997-01-01

    Intelligent browsing through a collection of reusable software components is facilitated with a computer having a video monitor and a user input interface such as a keyboard or a mouse for transmitting user selections, by presenting a picture of encyclopedia volumes with respective visible labels referring to types of software, in accordance with a metaphor in which each volume includes a page having a list of general topics under the software type of the volume and pages having lists of software components for each one of the generic topics, altering the picture to open one of the volumes in response to an initial user selection specifying the one volume to display on the monitor a picture of the page thereof having the list of general topics and altering the picture to display the page thereof having a list of software components under one of the general topics in response to a next user selection specifying the one general topic, and then presenting a picture of a set of different informative plates depicting different types of information about one of the software components in response to a further user selection specifying the one component.

  8. Multiscale principal component analysis

    International Nuclear Information System (INIS)

    Akinduko, A A; Gorban, A N

    2014-01-01

    Principal component analysis (PCA) is an important tool in exploring data. The conventional approach to PCA leads to a solution which favours the structures with large variances. This is sensitive to outliers and could obfuscate interesting underlying structures. One of the equivalent definitions of PCA is that it seeks the subspaces that maximize the sum of squared pairwise distances between data projections. This definition opens up more flexibility in the analysis of principal components which is useful in enhancing PCA. In this paper we introduce scales into PCA by maximizing only the sum of pairwise distances between projections for pairs of datapoints with distances within a chosen interval of values [l,u]. The resulting principal component decompositions in Multiscale PCA depend on point (l,u) on the plane and for each point we define projectors onto principal components. Cluster analysis of these projectors reveals the structures in the data at various scales. Each structure is described by the eigenvectors at the medoid point of the cluster which represent the structure. We also use the distortion of projections as a criterion for choosing an appropriate scale especially for data with outliers. This method was tested on both artificial distribution of data and real data. For data with multiscale structures, the method was able to reveal the different structures of the data and also to reduce the effect of outliers in the principal component analysis

  9. Single molecule atomic force microscopy and force spectroscopy of chitosan.

    Science.gov (United States)

    Kocun, Marta; Grandbois, Michel; Cuccia, Louis A

    2011-02-01

    Atomic force microscopy (AFM) and AFM-based force spectroscopy was used to study the desorption of individual chitosan polymer chains from substrates with varying chemical composition. AFM images of chitosan adsorbed onto a flat mica substrate show elongated single strands or aggregated bundles. The aggregated state of the polymer is consistent with the high level of flexibility and mobility expected for a highly positively charged polymer strand. Conversely, the visualization of elongated strands indicated the presence of stabilizing interactions with the substrate. Surfaces with varying chemical composition (glass, self-assembled monolayer of mercaptoundecanoic acid/decanethiol and polytetrafluoroethylene (PTFE)) were probed with chitosan modified AFM tips and the corresponding desorption energies, calculated from plateau-like features, were attributed to the desorption of individual polymer strands. Desorption energies of 2.0±0.3×10(-20)J, 1.8±0.3×10(-20)J and 3.5±0.3×10(-20)J were obtained for glass, SAM of mercaptoundecanoic/dodecanethiol and PTFE, respectively. These single molecule level results can be used as a basis for investigating chitosan and chitosan-based materials for biomaterial applications. Copyright © 2010 Elsevier B.V. All rights reserved.

  10. Intersegmental kinetics significantly impact mapping from finger musculotendon forces to fingertip forces.

    Science.gov (United States)

    Qiu, Dan; Lee, Sang Wook; Amine, Mukarram; Kamper, Derek G

    2017-12-08

    Predicting the fingertip force vector resulting from excitation of a given muscle remains a challenging but essential task in finger biomechanical modeling. While the conversion of musculotendon force to fingertip force can significantly be affected by finger posture, current techniques utilizing geometric moment arms may not capture such complex postural effects. Here, we attempted to elucidate the postural effects on the mapping between musculotendon force and fingertip force through in vitro experiments. Computer-controlled tendon loading was implemented on the 7 index finger musculotendons of 5 fresh-frozen cadaveric hands across different postures. The resulting fingertip forces/moments were used to compute the effective static moment arm (ESMA), relating tendon force to joint torque, at each joint. The ESMAs were subsequently modeled in three different manners: independent of joint angle; dependent only upon the corresponding joint angle; or dependent upon all joint angles. We found that, for the reconstruction of the fingertip force vector, the multi-joint ESMA model yielded the best outcome, both in terms of direction and magnitude of the vector (mean reconstruction error force transmission through a joint is affected by the posture of neighboring joints. Interestingly, the ESMA model that considers geometric changes of individual joints, the standard model used in biomechanical stimulations, often yielded worse reconstruction results than the simple constant-value ESMA model. Our results emphasize the importance of accurate description of the multi-joint dependency of the conversion of tendon force to joint moment for proper prediction of fingertip force direction. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Cognitive Component Analysis

    DEFF Research Database (Denmark)

    Feng, Ling

    2008-01-01

    of audio contexts along with pattern recognition methods to map components to known contexts. It also involves looking for the right representations for auditory inputs, i.e. the data analytic processing pipelines invoked by human brains. The main ideas refer to Cognitive Component Analysis, defined......This dissertation concerns the investigation of the consistency of statistical regularities in a signaling ecology and human cognition, while inferring appropriate actions for a speech-based perceptual task. It is based on unsupervised Independent Component Analysis providing a rich spectrum...... as the process of unsupervised grouping of generic data such that the ensuing group structure is well-aligned with that resulting from human cognitive activity. Its hypothesis runs ecologically: features which are essentially independent in a context defined ensemble, can be efficiently coded as sparse...

  12. Solid state lighting component

    Energy Technology Data Exchange (ETDEWEB)

    Yuan, Thomas; Keller, Bernd; Tarsa, Eric; Ibbetson, James; Morgan, Frederick; Dowling, Kevin; Lys, Ihor

    2017-10-17

    An LED component according to the present invention comprising an array of LED chips mounted on a submount with the LED chips capable of emitting light in response to an electrical signal. The array can comprise LED chips emitting at two colors of light wherein the LED component emits light comprising the combination of the two colors of light. A single lens is included over the array of LED chips. The LED chip array can emit light of greater than 800 lumens with a drive current of less than 150 milli-Amps. The LED chip component can also operate at temperatures less than 3000 degrees K. In one embodiment, the LED array is in a substantially circular pattern on the submount.

  13. CONCEPT OF FORMATION OF RESERVES AS AN OBJECT OF ACCOUNTING

    Directory of Open Access Journals (Sweden)

    Dubinina M.

    2018-01-01

    Full Text Available Introduction. To achieve increase of profitability of agricultural producers it is possible at the expense of: increase of agricultural production in the final realization price of products; use of cooperative principles to eliminate intermediaries; introduction of guaranteed minimum prices, etc. However, in resolving these tasks, along with state support, it is important to create an agricultural holding company own reserves, the funds of which are formed in accordance with the economic opportunities of the agricultural producer and are spent on the needs that the producer considers most promising at this time. Creation of own reserves is considered as a reduction of the financial burden of the state in providing assistance to rural economy. Purpose. The main tasks are to identify the essence of the concepts of “reserve” and “reserve”, as well as the rationale for the need to create them in agricultural enterprises. Study of existing accounting techniques for reserves. Results. The article highlights the accounting for the formation and use of reserves in agricultural organizations. Summarizing the definition of the term “reserve” in the general sense, we consider that the reserve is the source of the necessary new means and forces, formed initially in the form of a stock of opportunities in case of need for them in the future. The considered term is represented in the form of a scheme as a set of tools and capabilities that are considered in its characteristic from the position of three time reference points: the past, present and future. Reserves are created to cover future losses of the enterprise. Conclusions. As a result of studying the historical development of the system of reservation as an object of accounting, the link between the application of the object under consideration and the emergence of categories of accounting for profits and losses, income and expenses of the enterprise is traced. Reserves are created to

  14. Does weightlifting increase residual force enhancement?

    Science.gov (United States)

    Siebert, Tobias; Kurch, David; Blickhan, Reinhard; Stutzig, Norman

    2016-07-05

    The force maintained following stretching of an active muscle exceeds the isometric force at the same muscle length. This residual force enhancement (RFE) is different for various muscles. It is currently unknown whether training induces changes in RFE. Weightlifters perform a large number of eccentric contractions during training, and RFE might be functionally relevant. The aim of this study was to examine whether there is increased RFE in weightlifters versus a reference group. Therefore, we measured external reaction forces during a multi-joint leg extension in weightlifters (n=10) and a reference group (n=11) using a motor driven leg press dynamometer (ISOMED 2000). Steady state isometric forces after stretching were compared to the corresponding forces obtained during isometric reference contractions. Statistical analyses yielded a significant RFE for both groups (pweightlifting group versus the reference group. We conclude that long-term weightlifting has only a minor influence on RFE. We speculate that the specific training including a combination of eccentric and concentric exercises induced almost no changes in titin-isoform expression which may be responsible for generation of RFE after active muscle stretching. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. Cognitive reserve in ageing and Alzheimer's disease

    Science.gov (United States)

    Stern, Yaakov

    2012-01-01

    The concept of reserve accounts for individual differences in susceptibility to age-related brain changes or Alzheimer's disease-related pathology. There is evidence that some people can tolerate more of these changes than others and still maintain function. Epidemiologic studies suggest that lifetime exposures including educational and occupational attainment, and leisure activities in late life, can increase this reserve. For example, there is a reduced risk of developing Alzheimer's disease in individuals with higher educational or occupational attainment. It is convenient to think of two types of reserve: brain reserve, which refers to actual differences in the brain itself that may increase tolerance of pathology, and cognitive reserve. Cognitive reserve refers to individual differences in how tasks are performed that may allow some people to be more resilient than others. The concept of cognitive reserve holds out the promise of interventions that could slow cognitive aging or reduce the risk of dementia. PMID:23079557

  16. Metabolic reserve as a determinant of cognitive aging.

    Science.gov (United States)

    Stranahan, Alexis M; Mattson, Mark P

    2012-01-01

    Mild cognitive impairment (MCI) and Alzheimer's disease (AD) represent points on a continuum of cognitive performance in aged populations. Cognition may be impaired or preserved in the context of brain aging. One theory to account for memory maintenance in the context of extensive pathology involves 'cognitive reserve', or the ability to compensate for neuropathology through greater recruitment of remaining neurons. In this review, we propose a complementary hypothesis of 'metabolic reserve', where a brain with high metabolic reserve is characterized by the presence of neuronal circuits that respond adaptively to perturbations in cellular and somatic energy metabolism and thereby protects against declining cognition. Lifestyle determinants of metabolic reserve, such as exercise, reduced caloric intake, and intake of specific dietary components can promote neuroprotection, while pathological states arising from sedentary lifestyles and excessive caloric intake contribute to neuronal endangerment. This bidirectional relationship between metabolism and cognition may be mediated by alterations in central insulin and neurotrophic factor signaling and glucose metabolism, with downstream consequences for accumulation of amyloid-β and hyperphosphorylated tau. The metabolic reserve hypothesis is supported by epidemiological findings and the spectrum of individual cognitive trajectories during aging, with additional data from animal models identifying potential mechanisms for this relationship. Identification of biomarkers for metabolic reserve could assist in generating a predictive model for the likelihood of cognitive decline with aging.

  17. Electronic components and systems

    CERN Document Server

    Dennis, W H

    2013-01-01

    Electronic Components and Systems focuses on the principles and processes in the field of electronics and the integrated circuit. Covered in the book are basic aspects and physical fundamentals; different types of materials involved in the field; and passive and active electronic components such as capacitors, inductors, diodes, and transistors. Also covered in the book are topics such as the fabrication of semiconductors and integrated circuits; analog circuitry; digital logic technology; and microprocessors. The monograph is recommended for beginning electrical engineers who would like to kn

  18. Component Reengineering Workshops

    DEFF Research Database (Denmark)

    Hansen, Klaus Marius; Christensen, Henrik Bærbak

    2004-01-01

    In mature domains, a number of competing product lines may emerge, and from the point of view of customers of such product lines, reengineering and reuse of assets across product lines from different vendors becomes important. To address this issue we present a low-cost approach, component...... reengineering workshops, for assessing reengineering costs of reusing components between different product lines. The approach works on the level of software architectures, and relies critically on input from various (technical) stakeholders. It has been validated through case studies that are also presented...

  19. Forced synchronization of autonomous dynamical Boolean networks

    International Nuclear Information System (INIS)

    Rivera-Durón, R. R.; Campos-Cantón, E.; Campos-Cantón, I.; Gauthier, Daniel J.

    2015-01-01

    We present the design of an autonomous time-delay Boolean network realized with readily available electronic components. Through simulations and experiments that account for the detailed nonlinear response of each circuit element, we demonstrate that a network with five Boolean nodes displays complex behavior. Furthermore, we show that the dynamics of two identical networks display near-instantaneous synchronization to a periodic state when forced by a common periodic Boolean signal. A theoretical analysis of the network reveals the conditions under which complex behavior is expected in an individual network and the occurrence of synchronization in the forced networks. This research will enable future experiments on autonomous time-delay networks using readily available electronic components with dynamics on a slow enough time-scale so that inexpensive data collection systems can faithfully record the dynamics

  20. Forced synchronization of autonomous dynamical Boolean networks

    Energy Technology Data Exchange (ETDEWEB)

    Rivera-Durón, R. R., E-mail: roberto.rivera@ipicyt.edu.mx; Campos-Cantón, E., E-mail: eric.campos@ipicyt.edu.mx [División de Matemáticas Aplicadas, Instituto Potosino de Investigación Científica y Tecnológica A. C., Camino a la Presa San José 2055, Col. Lomas 4 Sección, C.P. 78216, San Luis Potosí, S.L.P. (Mexico); Campos-Cantón, I. [Facultad de Ciencias, Universidad Autónoma de San Luis Potosí, Álvaro Obregón 64, C.P. 78000, San Luis Potosí, S.L.P. (Mexico); Gauthier, Daniel J. [Department of Physics and Center for Nonlinear and Complex Systems, Duke University, Box 90305, Durham, North Carolina 27708 (United States)

    2015-08-15

    We present the design of an autonomous time-delay Boolean network realized with readily available electronic components. Through simulations and experiments that account for the detailed nonlinear response of each circuit element, we demonstrate that a network with five Boolean nodes displays complex behavior. Furthermore, we show that the dynamics of two identical networks display near-instantaneous synchronization to a periodic state when forced by a common periodic Boolean signal. A theoretical analysis of the network reveals the conditions under which complex behavior is expected in an individual network and the occurrence of synchronization in the forced networks. This research will enable future experiments on autonomous time-delay networks using readily available electronic components with dynamics on a slow enough time-scale so that inexpensive data collection systems can faithfully record the dynamics.

  1. Strategic Petroleum Reserve annual/quarterly report

    Energy Technology Data Exchange (ETDEWEB)

    1993-02-16

    During 1992 the Department continued planning activities for the expansion of the Strategic Petroleum Reserve to one billion barrels. A draft Environmental Impact Statement for the five candidate sites was completed in October 1992, and a series of public hearings was held during December 1992. Conceptual design engineering activities, life cycle cost estimates and geotechnical studies to support the technical requirements for an Strategic Petroleum Reserve Plan Amendment were essentially completed in December 1992. At the end of 1992, the Strategic Petroleum Reserve crude oil inventory was 574.7 million barrels and an additional 1.7 million barrels was in transit to the Reserve. During 1992 approximately 6.2 million barrels of crude oil were acquired for the Reserve. A Department of Energy Tiger Team Environmental, Safety and Health (ES&H) Assessment was conducted at the Strategic Petroleum Reserve from March 9 through April 10, 1992. In general, the Tiger Team found that Strategic Petroleum Reserve activities do not pose undue environmental, safety or health risks. The Strategic Petroleum Reserve`s Final Corrective Action Plan, prepared in response to the Tiger Team assessment, was submitted for Department approval in December 1992. On November 18, 1992, the Assistant Secretary for Fossil Energy selected DynMcDennott Petroleum Operations Company to provide management and operating services for the Strategic Petroleum Reserve for a period of 5 years commencing April 1, 1993. DynMcDermott will succeed Boeing Petroleum Services, Inc.

  2. Demand for International Reserves in Turkey

    Directory of Open Access Journals (Sweden)

    Yimaz Sinem

    2014-06-01

    Full Text Available Having an important place in the international monetary system, international reserves held by central bank usually reflect country’s economic strength in terms of international finance and trade. There are many reasons for holding international reserves by central banks such as financing the deficit in the balance of payment, managing the monetary and exchange rate policies, minimizing the negative effects of external shocks and reducing the cost of borrowing. Continuously changing and diversifying characteristics of these reasons affect the demand for reserves depending to the economic conditions of the country. Over the last ten years, there has been a tremendous increase in international reserves held by Turkish Central Bank. From 2002 to 2012, the reserves of the bank have risen from 20 billion dollars to 96 billion dollars, showing an increase more than four times. This sudden and huge increase in the foreign reserves drove us to determine and investigate the factors which induce the Turkish Central Bank to hold high level of reserves. Thus, the purpose of this study is to estimate and analyze the demand for international reserves held by central banks using the buffer stock model in the case of Turkey. The data used in the study is monthly and cover the period of 1990:03-2012:10. The buffer stock model was econometrically estimated by using the OLS method for three different models. Our findings indicate that the opportunity cost affected reserve demand much stronger than the reserve volatility in Turkish case.

  3. Naval Petroleum and Oil Shale Reserves

    International Nuclear Information System (INIS)

    1992-01-01

    During fiscal year 1992, the reserves generated $473 million in revenues, a $181 million decrease from the fiscal year 1991 revenues, primarily due to significant decreases in oil and natural gas prices. Total costs were $200 million, resulting in net cash flow of $273 million, compared with $454 million in fiscal year 1991. From 1976 through fiscal year 1992, the Naval Petroleum and Oil Shale Reserves generated more than $15 billion in revenues and a net operating income after costs of $12.5 billion. In fiscal year 1992, production at the Naval Petroleum Reserves at maximum efficient rates yielded 26 million barrels of crude oil, 119 billion cubic feet of natural gas, and 164 million gallons of natural gas liquids. From April to November 1992, senior managers from the Naval Petroleum and Oil Shale Reserves held a series of three workshops in Boulder, Colorado, in order to build a comprehensive Strategic Plan as required by Secretary of Energy Notice 25A-91. Other highlights are presented for the following: Naval Petroleum Reserve No. 1--production achievements, crude oil shipments to the strategic petroleum reserve, horizontal drilling, shallow oil zone gas injection project, environment and safety, and vanpool program; Naval Petroleum Reserve No. 2--new management and operating contractor and exploration drilling; Naval Petroleum Reserve No. 3--steamflood; Naval Oil Shale Reserves--protection program; and Tiger Team environmental assessment of the Naval Petroleum and Oil Shale Reserves in Colorado, Utah, and Wyoming

  4. Effects of experimental muscle pain on force variability during task-related and three directional isometric force task

    DEFF Research Database (Denmark)

    Mista, Christian Ariel; Graven-Nielsen, Thomas

    2013-01-01

    -dimensional force task during acute muscle pain. Twelve right-handed healthy volunteers participated in the experiment. Three-dimensional force signals were acquired during isometric elbow flexion at 5%, 15%, and 30% of the maximum voluntary contraction (MVC). The force components were represented by a circle...... was measured using sample entropy (SEn). Three-way repeated measures ANOVA with factors level of contraction, pain/control, and time were performed for the CV, the CoP, and the SEn of each component of the force. In the tangential forces, no significant effects were found for the 3D matching tasks. The ANOVA...... that the sample entropy was higher compare with the control session during muscle pain in the 1D tasks (Pmuscle pain only for the task-related contractions. This could be associated...

  5. Spain's nuclear components industry

    International Nuclear Information System (INIS)

    Kaibel, E.

    1985-01-01

    Spanish industrial participation in supply of components for nuclear power plants has grown steadily over the last fifteen years. The share of Spanish companies in work for the five second generation nuclear power plants increased to 50% of total capital investments. The necessity to maintain Spanish technology and production in the nuclear field is emphasized

  6. Component-oriented programming

    NARCIS (Netherlands)

    Bosch, J; Szyperski, C; Weck, W; Buschmann, F; Buchmann, AP; Cilia, MA

    2003-01-01

    This report covers the eighth Workshop on Component-Oriented Programming (WCOP). WCOP has been affiliated with ECOOP since its inception in 1996. The report summarizes the contributions made by authors of accepted position papers as well as those made by all attendees of the workshop sessions.

  7. Grey component analysis

    NARCIS (Netherlands)

    Westerhuis, J.A.; Derks, E.P.P.A.; Hoefsloot, H.C.J.; Smilde, A.K.

    2007-01-01

    The interpretation of principal component analysis (PCA) models of complex biological or chemical data can be cumbersome because in PCA the decomposition is performed without any knowledge of the system at hand. Prior information of the system is not used to improve the interpretation. In this paper

  8. Molecular Models Candy Components

    Science.gov (United States)

    Coleman, William F.

    2007-01-01

    An explanation of various principles of chemistry in a paper by Fanny Ennever by the use of candy is described. The paper explains components of sucrose and the invert sugar that results from the hydrolysis of sucrose and will help students in determining whether the products are indeed hydrates of carbon.

  9. Component lifetime modelling

    NARCIS (Netherlands)

    Verweij, J.F.; Verweij, J.F.; Brombacher, A.C.; Brombacher, A.C.; Lunenborg, M.M.; Lunenborg, M.M.

    1994-01-01

    There are two approaches to component lifetime modelling. The first one uses a reliability prediction method as described in the (military) handbooks with the appropriate models and parameters. The advantages are: (a) It takes into account all possible failure mechanisms. (b) It is easy to use. The

  10. Euler principal component analysis

    NARCIS (Netherlands)

    Liwicki, Stephan; Tzimiropoulos, Georgios; Zafeiriou, Stefanos; Pantic, Maja

    Principal Component Analysis (PCA) is perhaps the most prominent learning tool for dimensionality reduction in pattern recognition and computer vision. However, the ℓ 2-norm employed by standard PCA is not robust to outliers. In this paper, we propose a kernel PCA method for fast and robust PCA,

  11. Validating Timed Component Contracts

    DEFF Research Database (Denmark)

    Le Guilly, Thibaut; Liu, Shaoying; Olsen, Petur

    2015-01-01

    This paper presents a technique for testing software components with contracts that specify functional behavior, synchronization, as well as timing behavior. The approach combines elements from unit testing with model-based testing techniques for timed automata. The technique is implemented...... in an online testing tool, and we demonstrate its use on a concrete use case....

  12. ITER plasma facing components

    International Nuclear Information System (INIS)

    Kuroda, T.; Vieider, G.; Akiba, M.

    1991-01-01

    This document summarizes results of the Conceptual Design Activities (1988-1990) for the International Thermonuclear Experimental Reactor (ITER) project, namely those that pertain to the plasma facing components of the reactor vessel, of which the main components are the first wall and the divertor plates. After an introduction and an executive summary, the principal functions of the plasma-facing components are delineated, i.e., (i) define the low-impurity region within which the plasma is produced, (ii) absorb the electromagnetic radiation and charged-particle flux from the plasma, and (iii) protect the blanket/shield components from the plasma. A list of critical design issues for the divertor plates and the first wall is given, followed by discussions of the divertor plate design (including the issues of material selection, erosion lifetime, design concepts, thermal and mechanical analysis, operating limits and overall lifetime, tritium inventory, baking and conditioning, safety analysis, manufacture and testing, and advanced divertor concepts) and the first wall design (armor material and design, erosion lifetime, overall design concepts, thermal and mechanical analysis, lifetime and operating limits, tritium inventory, baking and conditioning, safety analysis, manufacture and testing, an alternative first wall design, and the limiters used instead of the divertor plates during start-up). Refs, figs and tabs

  13. Environmental forcing, invasion and control of ecological and epidemiological systems.

    Science.gov (United States)

    Greenman, J V; Norman, R A

    2007-08-07

    Destabilising a biological system through periodic or stochastic forcing can lead to significant changes in system behaviour. Forcing can bring about coexistence when previously there was exclusion; it can excite massive system response through resonance, it can offset the negative effect of apparent competition and it can change the conditions under which the system can be invaded. Our main focus is on the invasion properties of continuous time models under periodic forcing. We show that invasion is highly sensitive to the strength, period, phase, shape and configuration of the forcing components. This complexity can be of great advantage if some of the forcing components are anthropogenic in origin. They can be turned into instruments of control to achieve specific objectives in ecology and disease management, for example. Culling, vaccination and resource regulation are considered. A general analysis is presented, based on the leading Lyapunov exponent criterion for invasion. For unstructured invaders, a formula for this exponent can typically be written down from the model equations. Whether forcing hinders or encourages invasion depends on two factors: the covariances between invader parameters and resident populations and the shifts in average resident population levels brought about by the forcing. The invasion dynamics of a structured invader are much more complicated but an analytic solution can be obtained in quadratic approximation for moderate forcing strength. The general theory is illustrated by a range of models drawn from ecology and epidemiology. The relationship between periodic and stochastic forcing is also considered.

  14. Developing a Model Component

    Science.gov (United States)

    Fields, Christina M.

    2013-01-01

    The Spaceport Command and Control System (SCCS) Simulation Computer Software Configuration Item (CSCI) is responsible for providing simulations to support test and verification of SCCS hardware and software. The Universal Coolant Transporter System (UCTS) was a Space Shuttle Orbiter support piece of the Ground Servicing Equipment (GSE). The initial purpose of the UCTS was to provide two support services to the Space Shuttle Orbiter immediately after landing at the Shuttle Landing Facility. The UCTS is designed with the capability of servicing future space vehicles; including all Space Station Requirements necessary for the MPLM Modules. The Simulation uses GSE Models to stand in for the actual systems to support testing of SCCS systems during their development. As an intern at Kennedy Space Center (KSC), my assignment was to develop a model component for the UCTS. I was given a fluid component (dryer) to model in Simulink. I completed training for UNIX and Simulink. The dryer is a Catch All replaceable core type filter-dryer. The filter-dryer provides maximum protection for the thermostatic expansion valve and solenoid valve from dirt that may be in the system. The filter-dryer also protects the valves from freezing up. I researched fluid dynamics to understand the function of my component. The filter-dryer was modeled by determining affects it has on the pressure and velocity of the system. I used Bernoulli's Equation to calculate the pressure and velocity differential through the dryer. I created my filter-dryer model in Simulink and wrote the test script to test the component. I completed component testing and captured test data. The finalized model was sent for peer review for any improvements. I participated in Simulation meetings and was involved in the subsystem design process and team collaborations. I gained valuable work experience and insight into a career path as an engineer.

  15. Forces in strategy formation

    DEFF Research Database (Denmark)

    Steensen, Elmer Fly; Sanchez, Ron

    2008-01-01

    This chapter proposes that organizational strategy formation should be characterized theoretically as a process that is subject to several interacting forces, rather than represented by separate discrete decisionmodels or theoretic perspectives, as is commonly done in the strategic management...... literature. Based on an extensive review of relevant theory and empirical work in strategic decision-making, organizational change theory, cognitive and social psychology, and strategy processes, seven kinds of ''forces'' - rational, imposed, teleological, learning, political, heuristic, and social...... - are identified as interacting in and having significant influence on the strategy formation process. It is further argued that by applying a holistic ''forces-view'' of the significant and interacting influences on strategy formation, we can better understand the dynamics and challenges in managing the process...

  16. Force-assisted ultrasound imaging system through dual force sensing and admittance robot control.

    Science.gov (United States)

    Fang, Ting-Yun; Zhang, Haichong K; Finocchi, Rodolfo; Taylor, Russell H; Boctor, Emad M

    2017-06-01

    Ultrasound imaging has been a gold standard for clinical diagnoses due to its unique advantages compared to other imaging modalities including: low cost, noninvasiveness, and safeness to the human body. However, the ultrasound scanning process requires applying a large force over extended periods of time, often in uncomfortable postures in order to maintain the desired orientation. This physical requirement over sonographers' careers often leads to musculoskeletal pain and strain injuries. To address this problem, we propose a cooperatively controlled robotic ultrasound system to reduce the force sonographers apply. The proposed system consists of two key components: a six-axis robotic arm that holds and actuates the ultrasound probe, and a dual force sensor setup that enables cooperative control and adaptive force assistance. With the admittance force control, the robotic arm complies with the motion of the operator, while assisting with force during the scanning. We validated the system through a user study involving expert sonographers and lay people and demonstrated 32-73% reduction in human applied force and 8- 18% improvement in image stability. These results indicate that the system has the potential to not only reduce the burden on the sonographer, but also provide more stable ultrasound scanning.

  17. A General Business Model for Marine Reserves

    Science.gov (United States)

    Sala, Enric; Costello, Christopher; Dougherty, Dawn; Heal, Geoffrey; Kelleher, Kieran; Murray, Jason H.; Rosenberg, Andrew A.; Sumaila, Rashid

    2013-01-01

    Marine reserves are an effective tool for protecting biodiversity locally, with potential economic benefits including enhancement of local fisheries, increased tourism, and maintenance of ecosystem services. However, fishing communities often fear short-term income losses associated with closures, and thus may oppose marine reserves. Here we review empirical data and develop bioeconomic models to show that the value of marine reserves (enhanced adjacent fishing + tourism) may often exceed the pre-reserve value, and that economic benefits can offset the costs in as little as five years. These results suggest the need for a new business model for creating and managing reserves, which could pay for themselves and turn a profit for stakeholder groups. Our model could be expanded to include ecosystem services and other benefits, and it provides a general framework to estimate costs and benefits of reserves and to develop such business models. PMID:23573192

  18. Substantiating the Incurred but not Reported Reserve

    Directory of Open Access Journals (Sweden)

    Georgeta Vintilã

    2009-12-01

    Full Text Available In order to handle past and future liability taken by insurance contracts concluded, any insurance company must constitute and maintain technical reserves. Substantiating technical reserves is done through actuarial methods and its over-evaluation or under-evaluation influence solvency and financial performance of the insurance companies, in the sense of reducing solvency through over-evaluating reserves and, respectively, influencing profit (hence of outstanding tax through under-evaluating reserves. An important reserve for insurance companies is represented by the incurred but not reported reserve, as it allows the estimation of the liability the company may confront in the future, generated by events occurred in the past, which are not currently known in the present but will be reported in the future.

  19. The use of a single inertial sensor to estimate 3-dimensional ground reaction force during accelerative running tasks.

    Science.gov (United States)

    Gurchiek, Reed D; McGinnis, Ryan S; Needle, Alan R; McBride, Jeffrey M; van Werkhoven, Herman

    2017-08-16

    The purpose of this investigation was to determine the feasibility of using a single inertial measurement unit (IMU) placed on the sacrum to estimate 3-dimensional ground reaction force (F) during linear acceleration and change of direction tasks. Force plate measurements of F and estimates from the proposed IMU method were collected while subjects (n=15) performed a standing sprint start (SS) and a 45° change of direction task (COD). Error in the IMU estimate of step-averaged component and resultant F was quantified by comparison to estimates from the force plate using Bland-Altman 95% limits of agreement (LOA), root mean square error (RMSE), Pearson's product-moment correlation coefficient (r), and the effect size (ES) of the differences between the two systems. RMSE of the IMU estimate of step-average F ranged from 37.70 N to 77.05 N with ES between 0.04 and 0.47 for SS while for COD, RMSE was between 54.19 N to 182.92 N with ES between 0.08 and 1.69. Correlation coefficients between the IMU and force plate measurements were significant (p≤0.05) for all values (r=0.53 to 0.95) except the medio-lateral component of step-average F. The average angular error in the IMU estimate of the orientation of step-average F was ≤10° for all tasks. The results of this study suggest the proposed IMU method may be used to estimate sagittal plane components and magnitude of step-average F during a linear standing sprint start as well as the vertical component and magnitude of step-average F during a 45° change of direction task. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. A generic three-dimensional static force distribution basis for a medical needle inserted into soft tissue.

    Science.gov (United States)

    Robert, Adeline L G; Chagnon, Grégory; Bricault, Ivan; Cinquin, Philippe; Moreau-Gaudry, Alexandre

    2013-12-01

    In this paper, the static interaction forces between a medical needle and soft tissue during CT (Computerized Tomography) guided insertion are studied. More precisely a set of linearly independent elements describing the forces (a basis) is identified. This forms a generic basis from which any forces that act on a static needle (that is not fixed at its base and that is inserted into human tissue) can be described accurately. To achieve this purpose, the same needle was inserted 62 times into fresh porcine shoulder tissue and CT scans were acquired after each push to determine the final trajectory of the needle. From this set of trajectories, a generic static force basis was determined by using static Beam, B-spline theories and Principal Component Analysis (PCA). This generic basis was first validated on theoretical simulations and then on 20 different needles inserted into in vivo human tissues during real clinical interventions. Such a basis could be of use to highlight the forces acting all along the length of a needle inserted into a complex tissue and enables models of needle deflection to be developed. These models could be used in the development of automated robot assisted and/or image guided strategies for needle steering. © 2013 Elsevier Ltd. All rights reserved.

  1. Local viscoelastic properties of live cells investigated using dynamic and quasi-static atomic force microscopy methods.

    Science.gov (United States)

    Cartagena, Alexander; Raman, Arvind

    2014-03-04

    The measurement of viscoelasticity of cells in physiological environments with high spatio-temporal resolution is a key goal in cell mechanobiology. Traditionally only the elastic properties have been measured from quasi-static force-distance curves using the atomic force microscope (AFM). Recently, dynamic AFM-based methods have been proposed to map the local in vitro viscoelastic properties of living cells with nanoscale resolution. However, the differences in viscoelastic properties estimated from such dynamic and traditional quasi-static techniques are poorly understood. In this work we quantitatively reconstruct the local force and dissipation gradients (viscoelasticity) on live fibroblast cells in buffer solutions using Lorentz force excited cantilevers and present a careful comparison between mechanical properties (local stiffness and damping) extracted using dynamic and quasi-static force spectroscopy methods. The results highlight the dependence of measured viscoelastic properties on both the frequency at which the chosen technique operates as well as the interactions with subcellular components beyond certain indentation depth, both of which are responsible for differences between the viscoelasticity property maps acquired using the dynamic AFM method against the quasi-static measurements. Copyright © 2014 Biophysical Society. Published by Elsevier Inc. All rights reserved.

  2. Educating the security forces, a high risk group in malaria elimination efforts: an example from Sri Lanka.

    Science.gov (United States)

    Fernando, Sumadhya Deepika; Rodrigo, Chaturaka; de Silva, Nipun; Semege, Saveen; Rajapakse, Senaka; Samaranayake, Nilakashi; Senenayake, Sanath; Premaratne, Risintha Gayan

    2014-09-01

    The security forces are a high risk group for malaria transmission in Sri Lanka. Interrupting transmission and maintaining surveillance in this group is an important component of elimination efforts. The objective of the study was to develop a prototype educational programme on malaria for security forces serving in endemic areas. An interactive seminar was designed to deliver the required knowledge. The content was on current status, transmission, signs and symptoms and the role of security personnel in identification and prevention of malaria. Each seminar was preceded by a pre-test and followed by a post test to assess the improvement of knowledge. Fifty seminars were held in eight districts over 2 months with 2301 security forces personnel participating. Pre seminar knowledge on malaria was significantly better in the medical corps, those who had completed secondary education and in the Army compared to other security forces (pmalaria amongst security forces personnel who are a high risk group for re-introduction of malaria into the country. © The Author 2014. Published by Oxford University Press on behalf of Royal Society of Tropical Medicine and Hygiene. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  3. Electrochemical force microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Kalinin, Sergei V.; Jesse, Stephen; Collins, Liam F.; Rodriguez, Brian J.

    2017-01-10

    A system and method for electrochemical force microscopy are provided. The system and method are based on a multidimensional detection scheme that is sensitive to forces experienced by a biased electrode in a solution. The multidimensional approach allows separation of fast processes, such as double layer charging, and charge relaxation, and slow processes, such as diffusion and faradaic reactions, as well as capturing the bias dependence of the response. The time-resolved and bias measurements can also allow probing both linear (small bias range) and non-linear (large bias range) electrochemical regimes and potentially the de-convolution of charge dynamics and diffusion processes from steric effects and electrochemical reactivity.

  4. ForcePAD

    DEFF Research Database (Denmark)

    Lindemann, J.; Damkilde, Lars

    2009-01-01

    ForcePAD is a 2-dimensional finite element application that started as a concept application for finite element modeling. Over the course of 10 years the application has been evolved into an application that is used extensively in both an educational setting as well as a tool for design and engin......ForcePAD is a 2-dimensional finite element application that started as a concept application for finite element modeling. Over the course of 10 years the application has been evolved into an application that is used extensively in both an educational setting as well as a tool for design...

  5. IGT calculates world reserves of fossil fuels

    International Nuclear Information System (INIS)

    Anon.

    1986-01-01

    The Institute of Gas Technology has published the IGT World Reserves Survey, giving their latest tabulation of world reserves of fossil fuels and uranium. The report contains 120 Tables and 41 Figures. Estimates are provided for proved reserves, resources, current production, and life indexes of the non-renewable energy sources of the US and of the world as a whole. World regional data are also provided in many cases. The data are summarized here. 2 figures, 5 tables

  6. Reserve reporting from a banker's perspective

    International Nuclear Information System (INIS)

    Larson, B.O.

    1996-01-01

    A banker's perspective of oil and gas reserve reporting was presented. Topics chosen for discussion emphasized oil and gas lending, and the type of capital which is most relevant to the oil and gas industry. The concept of capital differentiation, potential worst case, and least specialization, were explained. An explanation of the reasons for the lender's different perspective on reserves was given. Methods that banks use to limit risk, and the role that reserve reports play in loan approvals were also reviewed

  7. Efficient transfer of sensitivity information in multi-component models

    International Nuclear Information System (INIS)

    Abdel-Khalik, Hany S.; Rabiti, Cristian

    2011-01-01

    In support of adjoint-based sensitivity analysis, this manuscript presents a new method to efficiently transfer adjoint information between components in a multi-component model, whereas the output of one component is passed as input to the next component. Often, one is interested in evaluating the sensitivities of the responses calculated by the last component to the inputs of the first component in the overall model. The presented method has two advantages over existing methods which may be classified into two broad categories: brute force-type methods and amalgamated-type methods. First, the presented method determines the minimum number of adjoint evaluations for each component as opposed to the brute force-type methods which require full evaluation of all sensitivities for all responses calculated by each component in the overall model, which proves computationally prohibitive for realistic problems. Second, the new method treats each component as a black-box as opposed to amalgamated-type methods which requires explicit knowledge of the system of equations associated with each component in order to reach the minimum number of adjoint evaluations. (author)

  8. When will fossil fuel reserves be diminished?

    International Nuclear Information System (INIS)

    Shafiee, Shahriar; Topal, Erkan

    2009-01-01

    Crude oil, coal and gas are the main resources for world energy supply. The size of fossil fuel reserves and the dilemma that 'when non-renewable energy will be diminished' is a fundamental and doubtful question that needs to be answered. This paper presents a new formula for calculating when fossil fuel reserves are likely to be depleted and develops an econometrics model to demonstrate the relationship between fossil fuel reserves and some main variables. The new formula is modified from the Klass model and thus assumes a continuous compound rate and computes fossil fuel reserve depletion times for oil, coal and gas of approximately 35, 107 and 37 years, respectively. This means that coal reserves are available up to 2112, and will be the only fossil fuel remaining after 2042. In the Econometrics model, the main exogenous variables affecting oil, coal and gas reserve trends are their consumption and respective prices between 1980 and 2006. The models for oil and gas reserves unexpectedly show a positive and significant relationship with consumption, while presenting a negative and significant relationship with price. The econometrics model for coal reserves, however, expectedly illustrates a negative and significant relationship with consumption and a positive and significant relationship with price. Consequently, huge reserves of coal and low-level coal prices in comparison to oil and gas make coal one of the main energy substitutions for oil and gas in the future, under the assumption of coal as a clean energy source. (author)

  9. Reservation system with graphical user interface

    KAUST Repository

    Mohamed, Mahmoud A. Abdelhamid

    2012-01-05

    Techniques for providing a reservation system are provided. The techniques include displaying a scalable visualization object, wherein the scalable visualization object comprises an expanded view element of the reservation system depicting information in connection with a selected interval of time and a compressed view element of the reservation system depicting information in connection with one or more additional intervals of time, maintaining a visual context between the expanded view and the compressed view within the visualization object, and enabling a user to switch between the expanded view and the compressed view to facilitate use of the reservation system.

  10. Wavenumber locking and pattern formation in spatially forced systems

    International Nuclear Information System (INIS)

    Manor, Rotem; Meron, Ehud; Hagberg, Aric

    2009-01-01

    We study wavenumber locking and pattern formation resulting from weak spatially periodic one-dimensional forcing of two-dimensional systems. We consider systems that produce stationary or traveling stripe patterns when unforced and apply forcing aligned with the stripes. Forcing at close to twice the pattern wavenumber selects, stabilizes, or creates resonant stripes locked at half the forcing wavenumber. If the mismatch between the forcing and pattern wavenumber is high we find that the pattern still locks but develops a wave vector component perpendicular to the forcing direction and forms rectangular and oblique patterns. When the unforced system supports traveling waves, resonant rectangular patterns remain stationary but oblique patterns travel in a direction orthogonal to the traveling waves.

  11. Bayesian Independent Component Analysis

    DEFF Research Database (Denmark)

    Winther, Ole; Petersen, Kaare Brandt

    2007-01-01

    In this paper we present an empirical Bayesian framework for independent component analysis. The framework provides estimates of the sources, the mixing matrix and the noise parameters, and is flexible with respect to choice of source prior and the number of sources and sensors. Inside the engine...... in a Matlab toolbox, is demonstrated for non-negative decompositions and compared with non-negative matrix factorization.......In this paper we present an empirical Bayesian framework for independent component analysis. The framework provides estimates of the sources, the mixing matrix and the noise parameters, and is flexible with respect to choice of source prior and the number of sources and sensors. Inside the engine...

  12. Adaptable component frameworks

    DEFF Research Database (Denmark)

    Katajainen, Jyrki; Simonsen, Bo

    2009-01-01

    for vector, which is undoubtedly the most used container of the C++ standard library. In particular, we specify the details of a vector implementation that is safe with respect to referential integrity and strong exception safety. Additionally, we report the experiences and lessons learnt from......The CPH STL is a special edition of the STL, the containers and algorithms part of the C++ standard library. The specification of the generic components of the STL is given in the C++ standard. Any implementation of the STL, e.g. the one that ships with your standard-compliant C++ compiler, should...... the development of component frameworks which we hope to be of benefit to persons engaged in the design and implementation of generic software libraries....

  13. Bacterial Cell Wall Components

    Science.gov (United States)

    Ginsberg, Cynthia; Brown, Stephanie; Walker, Suzanne

    Bacterial cell-surface polysaccharides cells are surrounded by a variety of cell-surface structures that allow them to thrive in extreme environments. Components of the cell envelope and extracellular matrix are responsible for providing the cells with structural support, mediating intercellular communication, allowing the cells to move or to adhere to surfaces, protecting the cells from attack by antibiotics or the immune system, and facilitating the uptake of nutrients. Some of the most important cell wall components are polysaccharide structures. This review discusses the occurrence, structure, function, and biosynthesis of the most prevalent bacterial cell surface polysaccharides: peptidoglycan, lipopolysaccharide, arabinogalactan, and lipoarabinomannan, and capsular and extracellular polysaccharides. The roles of these polysaccharides in medicine, both as drug targets and as therapeutic agents, are also described.

  14. Updating ARI Educational Benefits Usage Data Bases for Army Regular, Reserve, and Guard: 2005 - 2006

    National Research Council Canada - National Science Library

    Young, Winnie

    2007-01-01

    This report describes the updating of ARI's educational benefits usage database with Montgomery GI Bill and Army College Fund data for Army Regular, Reserve, and Guard components over the 2005 and 2006 period...

  15. Components of the environment

    International Nuclear Information System (INIS)

    Klinda, J.; Lieskovska, Z.

    1998-01-01

    This report of the Ministry of the Environment of the Slovak Republic deals with the components of the environment. The results of monitoring of air (emission situation), ambient air quality, atmospheric precipitation, tropospheric ozone, water (surface water, groundwater resources, waste water and drinking water), geological factors (geothermal energy, fuel deposits, ore deposits, non-metallic ore deposits), soil (area statistics, soil contamination. soil reaction and active extractable aluminium, soil erosion), flora and fauna (national strategy of biodiversity protection) are presented

  16. Fabricating nuclear components

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Activities of the Nuclear Engineering Division of Vickers Ltd., particularly fabrication of long slim tubular components for power reactors and the construction of irradiation loops and rigs, are outlined. The processes include hydraulic forming for fabrication of various types of tubes and outer cases of fuel transfer buckets, various specialised welding operations including some applications of the TIG process, and induction brazing of specialised assemblies. (U.K.)

  17. University students' reservations about dietetics as a career choice.

    Science.gov (United States)

    Lordly, Daphne

    2013-01-01

    Dietetics students' reservations about their career choice were investigated. In several dietetics programs in various provinces, an in-class or online survey was administered to students in the early or late stages of their education (n=397). Data were coded and analyzed, using descriptive statistics. Chi-square testing for independence was used to establish significant relationships. Forty-three percent (n=149) of those responding to the research question (n=344) indicated they had reservations about a dietetics career, primarily because of internship, salary, and employment concerns. Students enrolled in a coordinated internship/degree program experienced no reservations about internship. Students experienced fewer career reservations when they had made their career decision before grade 12, were influenced by a dietitian, or were in the later stages of their education. Findings have implications for dietetics recruitment, retention, research, and education. An understanding of sources of reservations about career choice will allow policy-makers, researchers, and educators to address issues to ensure that potential professionals are well informed about career components and that educational programs meet students' needs.

  18. High-seas fish wars generate marine reserves.

    Science.gov (United States)

    Herrera, Guillermo E; Moeller, Holly V; Neubert, Michael G

    2016-04-05

    The effective management of marine fisheries is an ongoing challenge at the intersection of biology, economics, and policy. One way in which fish stocks-and their habitats-can be protected is through the establishment of marine reserves, areas that are closed to fishing. Although the potential economic benefits of such reserves have been shown for single-owner fisheries, their implementation quickly becomes complicated when more than one noncooperating harvester is involved in fishery management, which is the case on the high seas. How do multiple self-interested actors distribute their fishing effort to maximize their individual economic gains in the presence of others? Here, we use a game theoretic model to compare the effort distributions of multiple noncooperating harvesters with the effort distributions in the benchmark sole owner and open access cases. In addition to comparing aggregate rent, stock size, and fishing effort, we focus on the occurrence, size, and location of marine reserves. We show that marine reserves are a component of many noncooperative Cournot-Nash equilibria. Furthermore, as the number of harvesters increases, (i) both total unfished area and the size of binding reserves (those that actually constrain behavior) may increase, although the latter eventually asymptotically decreases; (ii) total rents and stock size both decline; and (iii) aggregate effort used (i.e., employment) can either increase or decrease, perhaps nonmonotonically.

  19. Analysis of changes in paper cutting forces during the cutting cycle in single-knife guillotine

    OpenAIRE

    Rusin, Agnieszka; Petriaszwili, Georgij

    2013-01-01

    Paper presents the results of changes in the three components of cutting forces of paper stacks cutting during the cutting cycle in single-knife guillotine. The changes of the three components of cutting force at different stages of cutting cycle were analyzed.

  20. due to Capillary Forces

    Directory of Open Access Journals (Sweden)

    Hassen M. Ouakad

    2009-01-01

    Full Text Available We present modeling and analysis for the static behavior and collapse instabilities of doubly-clamped and cantilever microbeams subjected to capillary forces. These forces can be as a result of a volume of liquid trapped underneath the microbeam during the rinsing and drying process in fabrication. The model considers the microbeam as a continuous medium, the capillary force as a nonlinear function of displacement, and accounts for the mid-plane stretching and geometric nonlinearities. The capillary force is assumed to be distributed over a specific length underneath the microbeam. The Galerkin procedure is used to derive a reduced-order model consisting of a set of nonlinear algebraic and differential equations that describe the microbeams static and dynamic behaviors. We study the collapse instability, which brings the microbeam from its unstuck configuration to touch the substrate and gets stuck in the so-called pinned configuration. We calculate the pull-in length that distinguishes the free from the pinned configurations as a function of the beam thickness and gap width for both microbeams. Comparisons are made with analytical results reported in the literature based on the Ritz method for linear and nonlinear beam models. The instability problem, which brings the microbeam from a pinned to adhered configuration is also investigated. For this case, we use a shooting technique to solve the boundary-value problem governing the deflection of the microbeams. The critical microbeam length for this second instability is also calculated.

  1. The fifth force

    International Nuclear Information System (INIS)

    Fischbach, E.; Sudarsky, D.; Szafer, A.; Talmadge, C.; Aronson, S.H.

    1986-01-01

    We present a phenomenological description of the ''fifth force'' which focuses on the implications of the existing data from satellite and geophysical measurements of gravity, the Eoetvoes experiment, decays into hyperphotons, and the energy-dependence of the K 0 - anti K 0 parameters

  2. Magnetic Force Microscopy

    NARCIS (Netherlands)

    Abelmann, Leon

    Principle of MFM In magnetic force microscopy (MFM), the magnetic stray field above a very flat specimen, or sample, is detected by placing a small magnetic element, the tip, mounted on a cantilever spring very close to the surface of the sample (Figure 1). Typical dimensions are a cantilever length

  3. Separation problems and forcing

    Czech Academy of Sciences Publication Activity Database

    Zapletal, Jindřich

    2013-01-01

    Roč. 13, č. 1 (2013), s. 1350002 ISSN 0219-0613 R&D Projects: GA AV ČR IAA100190902 Institutional research plan: CEZ:AV0Z10190503 Keywords : separation * set of uniqueness * forcing Subject RIV: BA - General Mathematics Impact factor: 0.364, year: 2012 http://www.worldscientific.com/doi/abs/10.1142/S0219061313500025

  4. Allegiance: Egypt Security Forces

    Science.gov (United States)

    2013-12-01

    expected after the uprising of 2011 never truly materialized; the Interior Ministry instituted various cosmetic changes, but its basic construct and...military forces located there. The masked men appeared to be shooting and the army responded, shooting back.284 Whatever the stories

  5. Activation force splines

    DEFF Research Database (Denmark)

    Engell-Nørregård, Morten Pol; Erleben, Kenny

    We present a method for simulating the active contraction of deformable models, usable for interactive animation of soft deformable objects. We present a novel physical principle as the governing equation for the coupling between the low dimensional 1D activation force model and the higher...

  6. Inkjet deposited circuit components

    Science.gov (United States)

    Bidoki, S. M.; Nouri, J.; Heidari, A. A.

    2010-05-01

    All-printed electronics as a means of achieving ultra-low-cost electronic circuits has attracted great interest in recent years. Inkjet printing is one of the most promising techniques by which the circuit components can be ultimately drawn (i.e. printed) onto the substrate in one step. Here, the inkjet printing technique was used to chemically deposit silver nanoparticles (10-200 nm) simply by ejection of silver nitrate and reducing solutions onto different substrates such as paper, PET plastic film and textile fabrics. The silver patterns were tested for their functionality to work as circuit components like conductor, resistor, capacitor and inductor. Different levels of conductivity were achieved simply by changing the printing sequence, inks ratio and concentration. The highest level of conductivity achieved by an office thermal inkjet printer (300 dpi) was 5.54 × 105 S m-1 on paper. Inkjet deposited capacitors could exhibit a capacitance of more than 1.5 nF (parallel plate 45 × 45 mm2) and induction coils displayed an inductance of around 400 µH (planar coil 10 cm in diameter). Comparison of electronic performance of inkjet deposited components to the performance of conventionally etched items makes the technique highly promising for fabricating different printed electronic devices.

  7. Students, Economics, and the Federal Reserve

    Science.gov (United States)

    Bernanke, Ben S.

    2011-01-01

    Students with an understanding of economics are better equipped to comprehend the forces that influence people's standard of living and overall financial well-being. Broad-based economic literacy supports an environment where students can participate in America's democracy as well-informed and responsible citizens, whose collective actions may…

  8. 48 CFR 4.501 - [Reserved

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false [Reserved] 4.501 Section 4.501 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL ADMINISTRATIVE MATTERS Electronic Commerce in Contracting 4.501 [Reserved...

  9. 7 CFR 300.1 - [Reserved

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 5 2010-01-01 2010-01-01 false [Reserved] 300.1 Section 300.1 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE INCORPORATION BY REFERENCE § 300.1 [Reserved...

  10. 7 CFR 305.4 - [Reserved

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 5 2010-01-01 2010-01-01 false [Reserved] 305.4 Section 305.4 Agriculture Regulations of the Department of Agriculture (Continued) ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE PHYTOSANITARY TREATMENTS § 305.4 [Reserved...

  11. 50 CFR 216.42 - Photography. [Reserved

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Photography. [Reserved] 216.42 Section 216.42 Wildlife and Fisheries NATIONAL MARINE FISHERIES SERVICE, NATIONAL OCEANIC AND ATMOSPHERIC... MAMMALS Special Exceptions § 216.42 Photography. [Reserved] ...

  12. 9 CFR 73.1a - [Reserved

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false [Reserved] 73.1a Section 73.1a Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE INTERSTATE TRANSPORTATION OF ANIMALS (INCLUDING POULTRY) AND ANIMAL PRODUCTS SCABIES IN CATTLE § 73.1a [Reserved] ...

  13. 12 CFR 614.4710 - [Reserved

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 6 2010-01-01 2010-01-01 false [Reserved] 614.4710 Section 614.4710 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM LOAN POLICIES AND OPERATIONS Banks for Cooperatives and Agricultural Credit Banks Financing International Trade § 614.4710 [Reserved] ...

  14. 40 CFR 406.43 - [Reserved

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true [Reserved] 406.43 Section 406.43 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GRAIN MILLS POINT SOURCE CATEGORY Bulgur Wheat Flour Milling Subcategory § 406.43 [Reserved] ...

  15. 40 CFR 406.23 - [Reserved

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true [Reserved] 406.23 Section 406.23 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GRAIN MILLS POINT SOURCE CATEGORY Corn Dry Milling Subcategory § 406.23 [Reserved] ...

  16. 40 CFR 406.13 - [Reserved

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 28 2010-07-01 2010-07-01 true [Reserved] 406.13 Section 406.13 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS GRAIN MILLS POINT SOURCE CATEGORY Corn Wet Milling Subcategory § 406.13 [Reserved] ...

  17. 24 CFR 891.855 - Replacement reserves.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Replacement reserves. 891.855... § 891.855 Replacement reserves. (a) The mixed-finance owner shall establish and maintain a replacement... the funds will be used to pay for capital replacement costs for the Section 202 or 811 supportive...

  18. 22 CFR 40.69 - [Reserved

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false [Reserved] 40.69 Section 40.69 Foreign Relations DEPARTMENT OF STATE VISAS REGULATIONS PERTAINING TO BOTH NONIMMIGRANTS AND IMMIGRANTS UNDER THE IMMIGRATION AND NATIONALITY ACT, AS AMENDED Illegal Entrants and Immigration Violators § 40.69 [Reserved] ...

  19. Body reserves in intra-African migrants

    NARCIS (Netherlands)

    Nwaogu, Chima; Cresswell, Will

    Avian migration has been shown to be a life history strategy for surviving environmental resource variability, but it requires increased body reserves for long distance flight. Fat reserves make excellent energy stores for barrier crossing, whereas proteins generate less energy for the same mass of

  20. 21 CFR 211.170 - Reserve samples.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Reserve samples. 211.170 Section 211.170 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL... of deterioration unless visual examination would affect the integrity of the reserve sample. Any...

  1. 8 CFR 325.1 - [Reserved

    Science.gov (United States)

    2010-01-01

    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false [Reserved] 325.1 Section 325.1 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY NATIONALITY REGULATIONS NATIONALS BUT NOT CITIZENS OF THE UNITED STATES; RESIDENCE WITHIN OUTLYING POSSESSIONS § 325.1 [Reserved] ...

  2. 30 CFR 253.44 - [Reserved

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false [Reserved] 253.44 Section 253.44 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR OFFSHORE OIL SPILL FINANCIAL RESPONSIBILITY FOR OFFSHORE FACILITIES Requirements for Submitting OSFR Information § 253.44 [Reserved] ...

  3. 14 CFR 33.13 - [Reserved

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false [Reserved] 33.13 Section 33.13 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES Design and Construction; General § 33.13 [Reserved] ...

  4. 14 CFR 35.13 - [Reserved

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false [Reserved] 35.13 Section 35.13 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: PROPELLERS Design and Construction § 35.13 [Reserved] ...

  5. 14 CFR 35.11 - [Reserved

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false [Reserved] 35.11 Section 35.11 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION AIRCRAFT AIRWORTHINESS STANDARDS: PROPELLERS Design and Construction § 35.11 [Reserved] ...

  6. Reserve selection using nonlinear species distribution models.

    Science.gov (United States)

    Moilanen, Atte

    2005-06-01

    Reserve design is concerned with optimal selection of sites for new conservation areas. Spatial reserve design explicitly considers the spatial pattern of the proposed reserve network and the effects of that pattern on reserve cost and/or ability to maintain species there. The vast majority of reserve selection formulations have assumed a linear problem structure, which effectively means that the biological value of a potential reserve site does not depend on the pattern of selected cells. However, spatial population dynamics and autocorrelation cause the biological values of neighboring sites to be interdependent. Habitat degradation may have indirect negative effects on biodiversity in areas neighboring the degraded site as a result of, for example, negative edge effects or lower permeability for animal movement. In this study, I present a formulation and a spatial optimization algorithm for nonlinear reserve selection problems in grid-based landscapes that accounts for interdependent site values. The method is demonstrated using habitat maps and nonlinear habitat models for threatened birds in the Netherlands, and it is shown that near-optimal solutions are found for regions consisting of up to hundreds of thousands grid cells, a landscape size much larger than those commonly attempted even with linear reserve selection formulations.

  7. 7 CFR 1709.2 Policy. - [Reserved

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false [Reserved] 1709.2 Policy. Section 1709.2 Policy. Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ASSISTANCE TO HIGH ENERGY COST COMMUNITIES General Requirements § 1709.2 Policy. [Reserved] ...

  8. 7 CFR 1709.202 Policy. - [Reserved

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false [Reserved] 1709.202 Policy. Section 1709.202 Policy... AGRICULTURE ASSISTANCE TO HIGH ENERGY COST COMMUNITIES Bulk Fuel Revolving Fund Grant Program § 1709.202 Policy. [Reserved] ...

  9. 7 CFR 3560.65 - Reserve account.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Reserve account. 3560.65 Section 3560.65 Agriculture... DIRECT MULTI-FAMILY HOUSING LOANS AND GRANTS Direct Loan and Grant Origination § 3560.65 Reserve account... account that meets requirements of § 3560.306. At a minimum, the borrower must agree to make monthly...

  10. 21 CFR 720.5 - [Reserved

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 7 2010-04-01 2010-04-01 false [Reserved] 720.5 Section 720.5 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) COSMETICS VOLUNTARY FILING OF COSMETIC PRODUCT INGREDIENT COMPOSITION STATEMENTS § 720.5 [Reserved] ...

  11. 39 CFR 111.5 - [Reserved

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false [Reserved] 111.5 Section 111.5 Postal Service UNITED STATES POSTAL SERVICE POST OFFICE SERVICES [DOMESTIC MAIL] GENERAL INFORMATION ON POSTAL SERVICE § 111.5 [Reserved] ...

  12. 75 FR 44067 - Conservation Reserve Program

    Science.gov (United States)

    2010-07-28

    ... amending the Conservation Reserve Program (CRP) regulations to implement provisions of the Food, Conservation, and Energy Act of 2008 (the 2008 Farm Bill). The 2008 Farm Bill generally extends the existing... Commodity Credit Corporation 7 CFR Part 1410 RIN 0560-AH80 Conservation Reserve Program AGENCY: Commodity...

  13. 7 CFR 1780.8 - [Reserved

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 12 2010-01-01 2010-01-01 false [Reserved] 1780.8 Section 1780.8 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE (CONTINUED) WATER AND WASTE LOANS AND GRANTS General Policies and Requirements § 1780.8 [Reserved] ...

  14. 7 CFR 1779.79 - [Reserved

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 12 2010-01-01 2010-01-01 false [Reserved] 1779.79 Section 1779.79 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE (CONTINUED) WATER AND WASTE DISPOSAL PROGRAMS GUARANTEED LOANS § 1779.79 [Reserved] ...

  15. 7 CFR 1780.5 - [Reserved

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 12 2010-01-01 2010-01-01 false [Reserved] 1780.5 Section 1780.5 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE (CONTINUED) WATER AND WASTE LOANS AND GRANTS General Policies and Requirements § 1780.5 [Reserved] ...

  16. 7 CFR 1779.82 - [Reserved

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 12 2010-01-01 2010-01-01 false [Reserved] 1779.82 Section 1779.82 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE (CONTINUED) WATER AND WASTE DISPOSAL PROGRAMS GUARANTEED LOANS § 1779.82 [Reserved] ...

  17. 7 CFR 1779.74 - [Reserved

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 12 2010-01-01 2010-01-01 false [Reserved] 1779.74 Section 1779.74 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE (CONTINUED) WATER AND WASTE DISPOSAL PROGRAMS GUARANTEED LOANS § 1779.74 [Reserved] ...

  18. 7 CFR 1780.12 - [Reserved

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 12 2010-01-01 2010-01-01 false [Reserved] 1780.12 Section 1780.12 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE (CONTINUED) WATER AND WASTE LOANS AND GRANTS General Policies and Requirements § 1780.12 [Reserved] ...

  19. 7 CFR 1779.26 - [Reserved

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 12 2010-01-01 2010-01-01 false [Reserved] 1779.26 Section 1779.26 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE (CONTINUED) WATER AND WASTE DISPOSAL PROGRAMS GUARANTEED LOANS § 1779.26 [Reserved] ...

  20. 20 CFR 410.394 - [Reserved

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false [Reserved] 410.394 Section 410.394 Employees' Benefits SOCIAL SECURITY ADMINISTRATION FEDERAL COAL MINE HEALTH AND SAFETY ACT OF 1969, TITLE IV-BLACK LUNG BENEFITS (1969- ) Relationship and Dependency § 410.394 [Reserved] ...