WorldWideScience

Sample records for resende area se

  1. Establishment of a metallogenetic prospecting model of a pilot area in the Resende Basin - RJ, Brazil, within it's geomorphic aspects

    International Nuclear Information System (INIS)

    Bidone, E.D.; Perrin, P.; Rocha, J.A. da

    1984-01-01

    The Resende Basin lies between the Mantiqueira Mountain range which rises up to 2800m in the alcaline massif of Itatiaia - Passa Quatro in the North, and the Serra do Mar Mountain range in the South. The basin is the most casterly of a series of elongate Tertiary sedimentary basins that stretch SW to NE between Sao Paulo and Barra Mansa in the state of Rio de Janeiro, Brazil (44 0 to 47 0 West). Considering: -The economic potential represented by source rocks for the basin sediments; -the known capacity of sediments to concentrate metals when weathering, transport and deposition conditions are favorable, a geochemical analysis was done to determine; -favorable sites of uranium and thorium concentrations; -the evolution of depositional environments through integration of sedimentalogical, mineralogical, and geochemical data in order that the metallogenetic analysis promotes more efficient prospecting. The results permit a better understanding of the sedimentological and geochemical setting of Tertiary sediments in the region, as well as establish a method of rapid, inexpensive and efficient prospection that can be used in other basins of this type. (Author) [pt

  2. Oil painting on tinplate by Francisco José Resende

    Directory of Open Access Journals (Sweden)

    Ana Rita Veiga

    2010-11-01

    Full Text Available Cet article se concentre sur l'étude des techniques d'exécution, des matériaux et de l'état de conservation de trois peintures à l'huile sur fer-blanc (acier couvert d'étain du peintre portugais Francisco José Resende (1825 – 1893. Bien que le choix de peindre sur un support métallique n'était pas commun au XIXème siècle, cet auteur a exécuté au long de sa vie différentes œuvres sur ce substrat. Dans ces recherches, apparaissent les résultats comparatifs de la technique d'exécution de Francisco Resende et des matériaux présents dans les couches picturales et dans le support des trois œuvres faisant l'objet de l'étude. Bien qu'elles aient été exécutées à des dates similaires, on remarque des problèmes de conservation distincts - notamment les détachements, les cloques et la corrosion -, qui sont décrits et liés aux matériaux constituants des peintures.This article focuses on the study of execution techniques, material composition and condition of three oil paintings on tinplate – a thin sheet of steel coated with tin - by the Portuguese painter Francisco José Resende (1825-1893. Although the choice to paint on a metallic support was not very common in the nineteenth century, the painter executed several works on this support. The comparative results focus on Francisco Resende’s technique of execution, the materials used in the paint layers and on the support of the three works which are being studied. Although executed in the same period, they show different conservation problems - namely delamination and blistering of the paint layers, and also corrosion of the support.

  3. The Morro do Resende orthogneiss: mineralogy, petrography, geochemistry and geochronology

    International Nuclear Information System (INIS)

    Vasconcelos, Fabiana Franco de; Avila, Ciro Alexandre; Bongiolo, Everton Marques; Camara, Beatriz de Oliveira; Menezes, Victor Hugo Riboura; Cunha, Fernanda Caetano de Mattos; Neumann, Reiner; Teixeira, Wilson; Barbosa, Natali

    2017-01-01

    The Morro do Resende orthogneiss is a hololeucocratic to leucocratic, fine-grained body with monzogranitic to granodioritic composition, cropping out near the Volta Grande mine in Nazareno County, State of Minas Gerais, Brazil. It bears xenoliths of metamafic rocks of the Rio das Mortes metavolcano-sedimentary sequence and yields a U-Pb SHRIMP crystallization age of 2174 ± 4 Ma, relating it to one of the magmatic pulses of the Mineiro Belt. The primary mineralogy includes quartz, albite, microcline, biotite, allanite, zircon, magnetite, titanite and apatite, while sericite, epidote, zoisite, clinozoisite, carbonate and chlorite are metamorphic minerals. Maghemite, barite, fluorite, monazite, xenotime, garnet and REE fluorides (possibly gagarinite) are hydrothermal, as they fill the fractures, intergrow or replace the primary and metamorphic minerals. Fluid interaction was not homogeneous throughout the body. Metamorphic paragenesis points to greenschist facies conditions, which could be related to the Paleoproterozoic II event of the Mineiro Belt, which lasted from 2131 to 2101 Ma. The Morro do Resende orthogneiss is distinguished by significant REE enrichment, as well as a negative Eu anomaly linked to the magmatic crystallization and a negative Ce anomaly related to oxidizing hydrothermal fluids circulation. (author)

  4. The Morro do Resende orthogneiss: mineralogy, petrography, geochemistry and geochronology; Ortognaisse Morro do Resende: mineralogia, petrografia, geoquimica e geocronologia

    Energy Technology Data Exchange (ETDEWEB)

    Vasconcelos, Fabiana Franco de; Avila, Ciro Alexandre; Bongiolo, Everton Marques; Camara, Beatriz de Oliveira; Menezes, Victor Hugo Riboura; Cunha, Fernanda Caetano de Mattos, E-mail: fma3003@globo.com, E-mail: avila@mn.ufrj.br, E-mail: ebongiolo@geologia.ufrj.br, E-mail: camara_b@hotmail.com, E-mail: vmenezes92@gmail.com, E-mail: fefemattos@gmail.com [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil); Neumann, Reiner, E-mail: reiner.neumann@gmail.com [Centro de Tecnologia Mineral (CETEM), Rio de Janeiro, RJ (Brazil); Teixeira, Wilson; Barbosa, Natali, E-mail: wteixeir@usp.br, E-mail: natali@usp.br [Universidade de Sao Paulo (USP), Sao Paulo, SP (Brazil). Instituto de Geociencias

    2017-01-15

    The Morro do Resende orthogneiss is a hololeucocratic to leucocratic, fine-grained body with monzogranitic to granodioritic composition, cropping out near the Volta Grande mine in Nazareno County, State of Minas Gerais, Brazil. It bears xenoliths of metamafic rocks of the Rio das Mortes metavolcano-sedimentary sequence and yields a U-Pb SHRIMP crystallization age of 2174 ± 4 Ma, relating it to one of the magmatic pulses of the Mineiro Belt. The primary mineralogy includes quartz, albite, microcline, biotite, allanite, zircon, magnetite, titanite and apatite, while sericite, epidote, zoisite, clinozoisite, carbonate and chlorite are metamorphic minerals. Maghemite, barite, fluorite, monazite, xenotime, garnet and REE fluorides (possibly gagarinite) are hydrothermal, as they fill the fractures, intergrow or replace the primary and metamorphic minerals. Fluid interaction was not homogeneous throughout the body. Metamorphic paragenesis points to greenschist facies conditions, which could be related to the Paleoproterozoic II event of the Mineiro Belt, which lasted from 2131 to 2101 Ma. The Morro do Resende orthogneiss is distinguished by significant REE enrichment, as well as a negative Eu anomaly linked to the magmatic crystallization and a negative Ce anomaly related to oxidizing hydrothermal fluids circulation. (author)

  5. O jornalismo e a literatura em Otto Lara Resende

    OpenAIRE

    Aio, Allan de Abreu [UNESP

    2007-01-01

    Este estudo pretende discutir as relações entre jornalismo e literatura enquanto discursos que se cruzam ao longo da história e, ao mesmo tempo, preservam características singulares que os distanciam de uma relação mais próxima nos tempos atuais. Do lado do jornalismo, o bom português pregado pelos manuais de redação não é suficiente para potencializar a capacidade de informação do discurso, diante de um referencial ora complexo, ora sutil. Nesses casos, a linguagem da mediação social poderia...

  6. Rare earth phosphate occurrence in Resende formation, paleogene of continental rift in Southeast Brazil; Ocorrencia de fosfato de terras raras na formacao Resende, paleogeno do rift continental do Sudeste do Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Sant' Anna, Lucy Gomes; Riccomini, Claudio; Valarelli, Jose Vicente [Sao Paulo Univ., SP (Brazil). Inst. de Geociencias]. E-mail: lsantann@hotmail.com; comin@usp.br

    1999-12-01

    Petrographic studies and SEM/EDS and XRD analyses revealed the presence of a phosphate with Ca and REE (La, Nd) in a mudstone deposit of the Resende Formation, located on the northern border of the Resende Basin. The morphological characteristics (prismatic hexagonal habit) and chemical composition of the phosphate allow including this mineral in the rhabdophane group. This phosphate is authigenic and its origin is related to the dissolution of detritic apatite grains, probably by alkaline hydrothermal solutions. These solutions also provided some of the elements involved in the rhabdophane crystallization. (author)

  7. Determination of water fluoride levels in the vicinities of the nuclear fuel plant in Resende, Rio de Janeiro

    International Nuclear Information System (INIS)

    Carneiro, L.A.; Castro Faria, M.V. de

    1983-01-01

    The water fluoride levels in rivers and lakes, in a total of 26 different collection points placed within a circle of 10 km in diameter having the Nuclear Fuel Plant of Resende, Rio de Janeiro, as the center, were determined. (E.G.) [pt

  8. Quantum key distribution with several intercept-resend attacks via a depolarizing channel

    International Nuclear Information System (INIS)

    Dehmani, Mustapha; Errahmani, Mohamed; Ez-Zahraouy, Hamid; Benyoussef, Abdelilah

    2012-01-01

    The disturbance effect of a depolarizing channel on the security of the quantum key distribution of the four-state BB84 protocol, with multiple sequential intercept-resend attacks of many eavesdroppers, has been studied. The quantum bit error rate and the mutual information are computed for an arbitrary number N of eavesdroppers. It is found that the quantum error rate decreases with increasing the depolarizing parameter p characterizing the noise of the channel. For p tr of p below which the information is secure and otherwise the information is not secure. The value of p tr decreases with increasing the number of attacks. In contrast, for p ⩾ 0.165, the information is not secure independently of the number of eavesdroppers. Phase diagrams corresponding to the secure—unsecure information are also established. (paper)

  9. Security proof of counterfactual quantum cryptography against general intercept-resend attacks and its vulnerability

    International Nuclear Information System (INIS)

    Zhang Sheng; Wang Jian; Tang Chao-Jing

    2012-01-01

    Counterfactual quantum cryptography, recently proposed by Noh, is featured with no transmission of signal particles. This exhibits evident security advantages, such as its immunity to the well-known photon-number-splitting attack. In this paper, the theoretical security of counterfactual quantum cryptography protocol against the general intercept-resend attacks is proved by bounding the information of an eavesdropper Eve more tightly than in Yin's proposal [Phys. Rev. A 82 042335 (2010)]. It is also shown that practical counterfactual quantum cryptography implementations may be vulnerable when equipped with imperfect apparatuses, by proving that a negative key rate can be achieved when Eve launches a time-shift attack based on imperfect detector efficiency. (general)

  10. Large-area and highly crystalline MoSe2 for optical modulator

    Science.gov (United States)

    Yin, Jinde; Chen, Hao; Lu, Wei; Liu, Mengli; Li, Irene Ling; Zhang, Min; Zhang, Wenfei; Wang, Jinzhang; Xu, Zihan; Yan, Peiguang; Liu, Wenjun; Ruan, Shuangchen

    2017-12-01

    Transition metal dichalcogenides (TMDs) have been successfully used as broadband optical modulator materials for pulsed fiber laser systems. However, the nonlinear optical absorptions of exfoliated TMDs are strongly limited by their nanoflakes morphology with uncontrollable lateral size and thickness. In this work, we provide an effective method to fully explore the nonlinear optical properties of MoSe2. Large-area and high quality lattice MoSe2 grown by chemical vapor deposition method was adopted as an optical modulator for the first time. The large-area MoSe2 shows excellent nonlinear optical absorption with a large modulation depth of 21.7% and small saturable intensity of 9.4 MW cm-2. After incorporating the MoSe2 optical modulator into fiber laser cavity as a saturable absorber, a highly stable Q-switching operation with single pulse energy of 224 nJ is achieved. The large-area MoSe2 possessing superior nonlinear optical properties compared to exfoliated nanoflakes affords possibility for the larger-area two-dimensional materials family as high performance optical devices.

  11. Molecular beam epitaxy of large-area SnSe2 with monolayer thickness fluctuation

    Science.gov (United States)

    Park, Young Woon; Jerng, Sahng-Kyoon; Jeon, Jae Ho; Roy, Sanjib Baran; Akbar, Kamran; Kim, Jeong; Sim, Yumin; Seong, Maeng-Je; Kim, Jung Hwa; Lee, Zonghoon; Kim, Minju; Yi, Yeonjin; Kim, Jinwoo; Noh, Do Young; Chun, Seung-Hyun

    2017-03-01

    The interest in layered materials is largely based on the expectation that they will be beneficial for a variety of applications, from low-power-consuming, wearable electronics to energy harvesting. However, the properties of layered materials are highly dependent on thickness, and the difficulty of controlling thickness over a large area has been a bottleneck for commercial applications. Here, we report layer-by-layer growth of SnSe2, a layered semiconducting material, via van der Waals epitaxy. The films were fabricated on insulating mica substrates with substrate temperatures in the range of 210 °C-370 °C. The surface consists of a mixture of N and (N ± 1) layers, showing that the thickness of the film can be defined with monolayer accuracy (±0.6 nm). High-resolution transmission electron microscopy reveals a polycrystalline film with a grain size of ˜100 nm and clear Moiré patterns from overlapped grains with similar thickness. We also report field effect mobility values of 3.7 cm2 V-1 s-1 and 6.7 cm2 V-1 s-1 for 11 and 22 nm thick SnSe2, respectively. SnSe2 films with customizable thickness can provide valuable platforms for industry and academic researchers to fully exploit the potential of layered materials.

  12. In-plant test and evaluation of the neutron collar for verification of PWR fuel assemblies at Resende, Brazil

    International Nuclear Information System (INIS)

    Menlove, H.O.; Marzo, M.A.S.; de Almeida, S.G.; de Almeida, M.C.; Moitta, L.P.M.; Conti, L.F.; de Paiva, J.R.T.

    1985-11-01

    The neutron-coincidence collar has been evaluated for the measurement of pressurized-water reactor (PWR) fuel assemblies at the Fabrica de Elementos Combustiveis plant in Resende, Brazil. This evaluation was part of the cooperative-bilateral-safeguards technical-exchange program between the United States and Brazil. The neutron collar measures the 235 U content per unit length of full fuel assemblies using neutron interrogation and coincidence counting. The 238 U content is measured in the passive mode without the AmLi neutron-interrogation source. The extended evaluation took place over a period of 6 months with both scanning and single-zone measurements. The results of the tests gave a coincidence-response standard deviation of 0.7% (sigma = 1.49% for mass) for the active case and 2.5% for the passive case in 1000-s measurement times. The length measurement in the scanning mode was accurate to 0.77%. The accuracies of different calibration methods were evaluated and compared

  13. Reservoir core porosity in the Resende formation using 3D high-resolution X-ray computed microtomography

    International Nuclear Information System (INIS)

    Oliveira, Milena F.S.; Lima, Inaya; Lopes, Ricardo T.; Rocha, Paula Lucia F. da

    2009-01-01

    The storage capacity and production of oil are influenced, among other things, by rocks and fluids characteristics. Porosity is one of the most important characteristics to be analyzed in oil industry, mainly in oil prospection because it represents the direct capacity of storage fluids in the rocks. By definition, porosity is the ratio of pore volume to the total bulk volume of the formation, expressed in percentage, being able to be absolute or effective. The aim of this study was to calculate porosity by 3D High-Resolution X-ray Computed Microtomography using core plugs from Resende Formation which were collected in Porto Real, Rio de Janeiro State. This formation is characterized by sandstones and fine conglomerates with associated fine siliciclastic sediments, and the paleoenviroment is interpreted as a braided fluvial system. For acquisitions data, it was used a 3D high resolution microtomography system which has a microfocus X-ray tube (spot size < 5μm) and a 12-bit cooled X-ray camera (CCD fiber-optically coupled to a scintillator) operated at 100 kV and 100 μA. Twenty-two samples taken at different depths from two boreholes were analyzed. A total of 961 slices were performed with a resolution of 14.9 μm. The results demonstrated that μ-CT is a reliable and effective technique. Through the images and data it was possible to quantify the porosity and to view the size and shape of porous. (author)

  14. Reestruturação da disciplina Introdução à Engenharia na Faculdade de Engenharia de Resende: uma proposta com base nas metodologias ativas de aprendizagem

    Directory of Open Access Journals (Sweden)

    Mario Anibal Simon Esteves

    2016-06-01

    Full Text Available O objetivo deste artigo é propor a reestruturação da disciplina de Introdução à Engenharia, ministrada no ciclo básico da Faculdade de Engenharia de Resende, à luz das reflexões que acompanham a utilização das metodologias ativas de aprendizagem. O resultado concreto deste trabalho é o estabelecimento de um novo programa com objetivos gerais e específicos mais sintonizados aos requisitos e necessidades da formação do profissional para o mercado. A introdução de atividades em que o aluno se torna agente ativo, e não passivo, representa um esforço com vistas à sua participação mais efetiva no processo de ensino aprendizagem e reconfigura a estrutura didático-pedagógica da disciplina, representando um desafio significativo para os cursos de Engenharia. Espera-se, ainda, como reflexo desta reestruturação, que se promova a sinergia interdisciplinar dos conteúdos programáticos e a reformulação do processo de ensino e aprendizagem e dos conteúdos da disciplina e que os graves problemas das altas taxas de evasão escolar sejam minimizados. Além disso, pretende-se contribuir para que o estudante de Engenharia, pelo uso das novas metodologias, motive-se com a carreira de engenheiros tenha uma visão global do curso, facilitando, assim, a escolha de sua habilitação profissional.

  15. Large-area snow-like MoSe2 monolayers: synthesis, growth mechanism, and efficient electrocatalyst application.

    Science.gov (United States)

    Huang, Jingwen; Liu, Huiqiang; Jin, Bo; Liu, Min; Zhang, Qingchun; Luo, Liqiong; Chu, Shijin; Chu, Sheng; Peng, Rufang

    2017-07-07

    This study explores the large-area synthesis of controllable morphology, uniform, and high-quality monolayer. MoSe 2 is essential for its potential application in optoelectronics, photocatalysis, and renewable energy sources. In this study, we successfully synthesized snow-like MoSe 2 monolayers using a simple chemical vapor deposition method. Results reveal that snow-like MoSe 2 is a single crystal with a hexagonal structure, a thickness of ∼0.9 nm, and a lateral dimension of up to 20 μm. The peak position of the photoluminescence spectra is ∼1.52 eV corresponding to MoSe 2 monolayer. The growth mechanism of the snow-like MoSe 2 monolayer was investigated and comprised a four-step process during growth. Finally, we demonstrate that the snow-like MoSe 2 monolayers are ideal electrocatalysts for hydrogen evolution reactions (HERs), reflected by a low Tafel slope of ∼68 mV/decade. Compared with the triangular-shaped MoSe 2 monolayer, the hexangular snow-like shape with plentiful edges is superior for perfect electrocatalysts for HERs or transmission devices of optoelectronic signals.

  16. Release of alpha emitters into the environment by Nuclear Industries of Brazil in Resende, RJ

    International Nuclear Information System (INIS)

    Pereira, Wagner S.; Kelecom, Alphonse; Santos, Rodney; Santos, Maisa F.M.; Torres, Vinicius R.M.; Rodrigues, Jéssica J.S.; Universidade Veiga de Almeida; Universidade Federal Fluminense

    2017-01-01

    The Nuclear Industries of Brazil operates in the field of nuclear energy and has a monopoly on mining and manufacturing the nuclear fuel element in Brazil. The Nuclear Fuel Factory is also responsible for the reconversion process, the manufacture of the pellets and the assembly of the fuel element. Once there is a possibility of particulate material generation during the reconversion processes and the manufacture of pellets, a method of collective protection of the worker was established, which includes a system of air exhaustion of the factory area, with the capacity to renew the indoor air six times per hour. As a control measure, there is a system of automatic detection of the release of radionuclides in the chimney that monitors and calculates the released values. Through the dose calculation model established by the National Commission for Nuclear Energy the release limit is fixed at 1.2∙ 10"7Bq.y"-"1 of alpha emitters by FCN. The present work aims to evaluate the alpha radionuclides released by FCN, in terms of total release (Bq) and Activity Concentration (AC, mBq∙m"-"3). In 2016 it was released 4.14∙10"6Bq.y"-"1, which means an average of 3.45∙10"5Bq.month"-"1. The largest mean for AC was 4.03 mBq∙m"-"3. The release data was almost an order of magnitude lower than the annual release limit, proving the suitability of the atmospheric effluents to the licensing requirements. The largest magnitudes of the two variables (AC and release) were observed in August while the smallest ones, in January. (author)

  17. Release of alpha emitters into the environment by Nuclear Industries of Brazil in Resende, RJ

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Wagner S.; Kelecom, Alphonse; Santos, Rodney; Santos, Maisa F.M.; Torres, Vinicius R.M.; Rodrigues, Jéssica J.S., E-mail: comap@inb.gov.br, E-mail: pereiraws@gmail.com, E-mail: lararapls@hotmail.com [Indústrias Nucleares do Brasil (COMAP.N/FCN/INB), Resende RJ (Brazil). Fábrica de Combustível Nuclear. Coordenação de Meio Ambiente e Proteção Radiológica Ambiental; Universidade Veiga de Almeida (UVA), Rio de Janeiro, RJ (Brazil); Universidade Federal Fluminense (LARARA-PLS/UFF), Niterói, RJ (Brazil). Laboratório de Radiobiologia e Radiometria

    2017-07-01

    The Nuclear Industries of Brazil operates in the field of nuclear energy and has a monopoly on mining and manufacturing the nuclear fuel element in Brazil. The Nuclear Fuel Factory is also responsible for the reconversion process, the manufacture of the pellets and the assembly of the fuel element. Once there is a possibility of particulate material generation during the reconversion processes and the manufacture of pellets, a method of collective protection of the worker was established, which includes a system of air exhaustion of the factory area, with the capacity to renew the indoor air six times per hour. As a control measure, there is a system of automatic detection of the release of radionuclides in the chimney that monitors and calculates the released values. Through the dose calculation model established by the National Commission for Nuclear Energy the release limit is fixed at 1.2∙ 10{sup 7}Bq.y{sup -1} of alpha emitters by FCN. The present work aims to evaluate the alpha radionuclides released by FCN, in terms of total release (Bq) and Activity Concentration (AC, mBq∙m{sup -3}). In 2016 it was released 4.14∙10{sup 6}Bq.y{sup -1}, which means an average of 3.45∙10{sup 5}Bq.month{sup -1}. The largest mean for AC was 4.03 mBq∙m{sup -3}. The release data was almost an order of magnitude lower than the annual release limit, proving the suitability of the atmospheric effluents to the licensing requirements. The largest magnitudes of the two variables (AC and release) were observed in August while the smallest ones, in January. (author)

  18. Heavy metal pollution in soils of abandoned mining areas (SE, Spain)

    Science.gov (United States)

    Martínez-Sánchez, M. J.; Pérez-Sirvent, C.; Molina, J.; Tudela, M. L.; Navarro, M. C.; García-Lorenzo, M. L.

    2009-04-01

    Elevated levels of heavy metals can be found in and around disused metalliferous mines due to discharge and dispersion of mine wastes into nearby agricultural soils, food crops and stream systems. Heavy metals contained in the residues from mining and metallurgical operations are often dispersed by wind and/or water after their disposal. These areas have severe erosion problems caused by wind and water runoff in which soil and mine spoil texture, landscape topography and regional and microclimate play an important role. The present study was carried out in the Cabezo Rajao (La Uni

  19. Environmental risks associated to wind erosion in a metal mining area from SE Spain

    International Nuclear Information System (INIS)

    Garcia Fernandez, G.; Romero Diaz, A.

    2009-01-01

    Soils and mining wastes from the Mediterranean mining area placed in the Sierra Minera Mountains are highly enriched in heavy metals such as lead and zinc, but also other metals such as cadmium and arsenic. Wind erosion in this area could be considered extremely high and hazards associated to this eroded sediments seems to be high because the huge amount of metals present in this wastes. Therefore, combination of high erosion rates and high metal concentration in this mining waste, make those environmental risks can be considered high for the surrounding ecosystems, but also for public health of the nearby villages and towns. In order, to study these wind erosion processes over these mining materials, some experiments for the evaluation of the transportation of soil particles were carried out. Erosion rates in this realm is particularly important during spring months, when increased activity of the eastern winds brings intense soil dragging, with strong effects on the metals dispersion, including the massive removal of sediments. (Author) 16 refs.

  20. Environmental risks associated to wind erosion in a metal mining area from SE Spain

    Energy Technology Data Exchange (ETDEWEB)

    Garcia Fernandez, G.; Romero Diaz, A.

    2009-07-01

    Soils and mining wastes from the Mediterranean mining area placed in the Sierra Minera Mountains are highly enriched in heavy metals such as lead and zinc, but also other metals such as cadmium and arsenic. Wind erosion in this area could be considered extremely high and hazards associated to this eroded sediments seems to be high because the huge amount of metals present in this wastes. Therefore, combination of high erosion rates and high metal concentration in this mining waste, make those environmental risks can be considered high for the surrounding ecosystems, but also for public health of the nearby villages and towns. In order, to study these wind erosion processes over these mining materials, some experiments for the evaluation of the transportation of soil particles were carried out. Erosion rates in this realm is particularly important during spring months, when increased activity of the eastern winds brings intense soil dragging, with strong effects on the metals dispersion, including the massive removal of sediments. (Author) 16 refs.

  1. Identification of the origin of salts in an agricultural area of SE Spain

    Science.gov (United States)

    Acosta, Jose A.; Faz, Angel; Kalbitz, Karsten; Jansen, Boris; Silvia, Martinez-Martinez

    2010-05-01

    In spite of soil salinity having been widely studied in many part of the world, origin of salinity has not been addresses in detail in some of the most productive agricultural areas of Europe (e.g. southeast of Spain). According to the European Commission, salinization affects about 1 to 3 million ha of the area of the European Union and Candidate Countries. In Europe, most of the salt-affected land surfaces are concentrated in the Mediterranean basin. In Spain, about 3% of the 3.5 million hectares of irrigated land are severely affected by salts and another 15% is at serious risk of imminent salinization. Due to the limited water resources in southeast of Spain, water with marginal quality is used for irrigation. The use of this water has led to degradation, reduction of the land's production capacity and soil salinization. The main aim of the present study was to identify the origin of the salts involved in such salinization, using classical and multivariable statistical techniques. In order to achieve this objective, surface soil samples were collected in January and July 2009 at 48 sites located in a representative lemon production area close to City of Murcia, covering a surface area of 44 km2. Soil pH, electrical conductivity, ionic composition, total organic matter, equivalent calcium carbonate, cation exchange capacity and particle size distribution were determined. The Pearson correlation coefficient, r, was used to measure the relationship between two quantitative variables and principal components analysis was used to study the correlations among anions and cations and their grouping into several factors. Results indicated that the high electrical conductivity found in the study area indeed comes from poor quality irrigation water used for agriculture. Anions and cations responsible of the salinity were chlorides, sulphates, calcium, magnesium and sodium. Mismanagement of water and traditional irrigation system resulted in salt build-up in the soil

  2. The hidden Mediterranean diet: wild vegetables traditionally gathered and consumed in the Gargano area, Apulia, SE Italy

    Directory of Open Access Journals (Sweden)

    Nello Biscotti

    2015-10-01

    Full Text Available Despite the extensive bio-scientific literature concerning the Mediterranean diet, which emerged in the last three decades, systematic ethnography-centered investigations on a crucial portion of this food system, linked to the traditional consumption of non-cultivated vegetables, are still largely lacking in many areas of the Mediterranean Basin. In this research, an ethnobotanical field study focusing on wild vegetables traditionally gathered and consumed locally, was conducted in a few centers and villages located in the Gargano area, northern Apulia, SE Italy, by interviewing twenty-five elderly informants. The folk culinary uses of seventy-nine botanical taxa of wild vascular plants, belonging to nineteen families, were recorded, thus showing a remarkable resilience of traditional environmental knowledge (TEK related to wild food plants. In particular, approximately one-fourth of the recorded wild vegetables are still very commonly gathered and consumed nowadays, while ten taxa have never been reported in previous ethnobotanical studies conducted in Southern Italy. These findings demonstrate the crucial cultural role played by folk cuisines in preserving TEK, despite significant socio-economic changes that have affected the study area during the past four decades.

  3. Seismic microzonation and velocity models of El Ejido area (SE Spain) from the diffuse-field H/V method

    Science.gov (United States)

    García-Jerez, Antonio; Seivane, Helena; Navarro, Manuel; Piña-Flores, José; Luzón, Francisco; Vidal, Francisco; Posadas, Antonio M.; Aranda, Carolina

    2016-04-01

    El Ejido town is located in the Campo de Dalías coastal plain (Almería province, SE Spain), emplaced in one of the most seismically active regions of Spain. The municipality has 84000 inhabitants and presented a high growth rate during the last twenty years. The most recent intense seismic activity occurred close to this town was in 1993 and 1994, with events of Mb = 4.9 and Mb = 5.0, respectively. To provide a basis for site-specific hazard analysis, we first carried out a seismic microzonation of this town in terms of predominant periods and geotechnical properties. The predominant periods map was obtained from ambient noise observations on a grid of 250 x 250 m in the main urban area, and sparser measurements on the outskirts. These broad-band records, of about 20 minutes long each, were analyzed by using the horizontal-to-vertical spectral ratio technique (H/V). Dispersion curves obtained from two array measurements of ambient noise and borehole data provided additional geophysical information. All the surveyed points in the town were found to have relatively long predominant periods ranging from 0.8 to 2.3 s and growing towards the SE. Secondary high-frequency (> 2Hz) peaks were found at about the 10% of the points only. On the other hand, Vs30 values of 550 - 650 m/s were estimated from the array records, corresponding to cemented sediments and medium-hard rocks. The local S-wave velocity structure has been inverted from the H/V curves for a subset of the measurement sites. We used an innovative full-wavefield method based on the diffuse-wavefield approximation (Sánchez-Sesma et al., 2011) combined with the simulated annealing algorithm. Shallow seismic velocities and deep boreholes data were used as constraints. The results show that the low-frequency resonances are related with the impedance contrast between several hundred meters of medium-hard sedimentary rocks (marls and calcarenites) with the stiffer basement of the basin, which dips to the SE. These

  4. Fuzzy logic application for data correction of gamma ray profile and correlation with effective porosity of core from Resende Basin, Rio de Janeiro; Aplicacao da logica fuzzy para correcao de dados de perfil de raios gama e correlacao com porosidade efetiva de testemunhos da Bacia de Resende, Rio de Janeiro

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Francisco de Assis Leal de; Tunala, Leonardo Fernandes; Abreu, Carlos Jorge de; Lopes, Ricardo Tadeu, E-mail: pachoteki@yahoo.com.br, E-mail: leotunala@hotmail.com, E-mail: abreu@geologia.ufrj.br, E-mail: ricardo@lin.ufrj.br [Universidade Federal do Rio de Janeiro (UFRJ/CCMN), RJ (Brazil). Centro de Ciencias Matematicas e da Natureza. Inst. de Geociencias. Dept. de Geologia; Rocha, Paula Lucia Ferrucio da, E-mail: ferrucio@acd.ufrj.br [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil); Martins, Ricardo Rhomberg, E-mail: ricardo301@gmail.com [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola Politenica de Engenharia; Lima, Inaya Correa Barbosa, E-mail: inaya@lin.ufrj.br [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Centro de Tecnologia

    2010-12-15

    This work presents here a study on the porosity of cores from Resende Basin (Rio de Janeiro). The first step involved the selection, thinning of the material (core) and sample preparation for the use of porosimeter to obtain effective porosity. The material studied is sandstone, friable, coarse to very fine of three wells (GPR1, GPR2 and GPR3). The fuzzy logic (MatLab) was applied to the effective porosity data calculated from the gamma ray (GR) profile for the construction of a synthetic profile and from this we could identify the errors made in calculating the data. Then the results of porosity from the core were correlated with data from the corrected effective porosity (gamma ray profile) in order to prove the results obtained with both methods. The analysis of the synthetic porosity calculated by the fuzzy logic has shown that this is a promising method for assessing the quality of data and to obtain good fits. (author)

  5. Highly Sensitive Electromechanical Piezoresistive Pressure Sensors Based on Large-Area Layered PtSe2 Films.

    Science.gov (United States)

    Wagner, Stefan; Yim, Chanyoung; McEvoy, Niall; Kataria, Satender; Yokaribas, Volkan; Kuc, Agnieszka; Pindl, Stephan; Fritzen, Claus-Peter; Heine, Thomas; Duesberg, Georg S; Lemme, Max C

    2018-05-23

    Two-dimensional (2D) layered materials are ideal for micro- and nanoelectromechanical systems (MEMS/NEMS) due to their ultimate thinness. Platinum diselenide (PtSe 2 ), an exciting and unexplored 2D transition metal dichalcogenide material, is particularly interesting because its low temperature growth process is scalable and compatible with silicon technology. Here, we report the potential of thin PtSe 2 films as electromechanical piezoresistive sensors. All experiments have been conducted with semimetallic PtSe 2 films grown by thermally assisted conversion of platinum at a complementary metal-oxide-semiconductor (CMOS)-compatible temperature of 400 °C. We report high negative gauge factors of up to -85 obtained experimentally from PtSe 2 strain gauges in a bending cantilever beam setup. Integrated NEMS piezoresistive pressure sensors with freestanding PMMA/PtSe 2 membranes confirm the negative gauge factor and exhibit very high sensitivity, outperforming previously reported values by orders of magnitude. We employ density functional theory calculations to understand the origin of the measured negative gauge factor. Our results suggest PtSe 2 as a very promising candidate for future NEMS applications, including integration into CMOS production lines.

  6. CVD synthesis of large-area, highly crystalline MoSe2 atomic layers on diverse substrates and application to photodetectors.

    Science.gov (United States)

    Xia, Jing; Huang, Xing; Liu, Ling-Zhi; Wang, Meng; Wang, Lei; Huang, Ben; Zhu, Dan-Dan; Li, Jun-Jie; Gu, Chang-Zhi; Meng, Xiang-Min

    2014-08-07

    Synthesis of large-area, atomically thin transition metal dichalcogenides (TMDs) on diverse substrates is of central importance for the large-scale fabrication of flexible devices and heterojunction-based devices. In this work, we successfully synthesized a large area of highly-crystalline MoSe2 atomic layers on SiO2/Si, mica and Si substrates using a simple chemical vapour deposition (CVD) method at atmospheric pressure. Atomic force microscopy (AFM) and Raman spectroscopy reveal that the as-grown ultrathin MoSe2 layers change from a single layer to a few layers. Photoluminescence (PL) spectroscopy demonstrates that while the multi-layer MoSe2 shows weak emission peaks, the monolayer has a much stronger emission peak at ∼ 1.56 eV, indicating the transition from an indirect to a direct bandgap. Transmission electron microscopy (TEM) analysis confirms the single-crystallinity of MoSe2 layers with a hexagonal structure. In addition, the photoresponse performance of photodetectors based on MoSe2 monolayer was studied for the first time. The devices exhibit a rapid response of ∼ 60 ms and a good photoresponsivity of ∼ 13 mA/W (using a 532 nm laser at an intensity of 1 mW mm(-2) and a bias of 10 V), suggesting that MoSe2 monolayer is a promising material for photodetection applications.

  7. Petrology of blueschist and meta-greywacke along the Turkmeni-Ordib fault (Turkmeni area, SE of Anarak

    Directory of Open Access Journals (Sweden)

    Fereshteh Bayat

    2015-10-01

    Full Text Available Introduction The occurrence of blueschist metamorphic facies is believed to mark the existence of former subduction zones. This facies is represented in the main constituents of subduction-accretion complexes, where it occurs in separate tectonic sheets, imbricated slices, lenses, or exotic blocks within a serpentinite mélange (Volkova et al., 2011. The evidence of the presence and maturity of Paleo- Tethys oceanic crust in the CEIM (define this in Paleo-Tethys branches, subduction and collision has been studied by various authors (Bagheri, 2007; Zanchi et al., 2009; Bayat and Torabi, 2011; Torabi 2011. Late Paleozoic blueschists have recognized in the western part of the CEIM (e. g. Anarak, Chupanan and Turkmeni in linear trends. Metamorphic rocks of the Turkmeni area (SE of Anarak are composed of blueschist and meta-greywacke and are situated along the Turkmeni-Ordib fault associated with Paleozoic rock units and serpentinized peridotite bodies. Turkmeni blueschist and meta-greywackes have not been studied by previous workers. The Turkmeni blueschists consist of albite, winchite, actinolite and epidote. Granoblastic, nematoblastic and lepidoblastic are main textures in these rocks. Winchite is found in the matrix and around epidote grains. This sodic-calcic amphibole serves as an index mineral in blueschist facies. Actinolite and epidote formed during retrograde metamorphism of blueschists in the greenschist facies. The mineral assemblage of albite, epidote, chlorite and phengite ± garnet is present in meta-greywackes in the Turkmeni blueschists. Veins of garnet, muscovite, quartz and opaque minerals are extensive in these rocks. Epidote and chlorite formed in meta-greywackes by retrograde metamorphism in the greenschist facies. The aim of the present study is to determine the petrological and geochemical characteristics, P-T condition of blueschists and meta-greywackes, as well as the geotectonic setting of primary basaltic rocks of the

  8. Composition of the Rex Chert and associated rocks of the Permian Phosphoria Formation: Soda Springs area, SE Idaho

    Science.gov (United States)

    Hein, James R.; McIntyre, Brandie; Perkins, Robert B.; Piper, David Z.; Evans, James

    2002-01-01

    This study, one in a series, reports bulk chemical and mineralogical compositions, as well as petrographic and outcrop descriptions of rocks collected from three measured outcrop sections of the Rex Chert member of the Phosphoria Formation in SE Idaho. The three measured sections were chosen from ten outcrops of Rex Chert that were described in the field. The Rex Chert overlies the Meade Peak Phosphatic Shale Member of the Phosphoria Formation, the source of phosphate ore in the region. Rex Chert removed as overburden comprises part of the material disposed in waste-rock piles during phosphate mining. It has been proposed that the chert be used to cap and isolate waste piles, thereby inhibiting the leaching of potentially toxic elements into the environment. It is also used to surface roads in the mining district. The rock samples studied here constitute a set of individual chert beds that are representative of each stratigraphic section sampled. The informally named cherty shale member that overlies the Rex Chert in measured section 1 was also described and sampled. The upper Meade Peak and the transition zone to the Rex Chert were described and sampled in section 7. The cherts are predominantly spicularite composed of granular and mosaic quartz, and sponge spicules, with various but minor amounts of other fossils and detrital grains. The cherty shale member and transition rocks between the Meade Peak and Rex Chert are siliceous siltstones and argillaceous cherts with ghosts of sponge spicules and somewhat more detrital grains than the chert. The overwhelmingly dominant mineral is quartz, although carbonate beds are rare in each section and are composed predominantly of calcite and dolomite in addition to quartz. Feldspar, mica, clay minerals, calcite, dolomite, and carbonate fluorapatite are minor to trace minerals in the chert. The mean concentrations of oxides and elements in the Rex Chert and the cherty shale member are dominated by SiO2, which averages 94

  9. The environmental education program and the corporative social responsibility: a case study of the Nuclear Fuel Factory (FCN) in Resende/RJ

    International Nuclear Information System (INIS)

    Ribeiro, Adriana A.A.; Silva, Ana Cristina L.; Pires, Flávia Cristina A.C.

    2017-01-01

    The Environmental Education Program (Programa de Educação Ambiental - PEA) of the Nuclear Fuel Factory (Fábrica de Combustível Nuclear - FCN) started in 2014 as part of the condition imposed by the Brazilian Environmental Regulatory Authority (IBAMA) for environmental licensing. The PEA for the local community aims to clarify the population about issues involving the company's activities and address potential environmental impacts that these activities may cause. The PEA for workers (PEAT) aims to promote environmental awareness, encourage good environmental practices and reinforce the importance of safety at work. By enlisting the participation of the employees and the local population, the study allowed the identification of the main issues of environmental aspects. Based on such research, the PEA prioritized the activities carried out at FCN and considered the following topics: environmental impacts, natural resources, waste generation, biodiversity, public policies, job generation and increase of real income and conservation units. The aim of this work is to share strategies and participative methodology as well as the achievements. In the context of the Corporative Social Responsibility, the implementation of the PEA is part of the company policy in accordance with its code of the ethics to support corporative programs with special focus on environmental preservation and the appreciation of the human being, besides providing transparent and true information to internal and external publics. The results in 2015 and 2016 demonstrated a participative management between the FCN and the local population in the districts of Areias/SP, Itatiaia/RJ and Resende/RJ. Besides that, the PEA enables to strengthen the corporative relations, to maintain a dialogue with the local community and to spread out the knowledge about nuclear technology. (author)

  10. The environmental education program and the corporative social responsibility: a case study of the Nuclear Fuel Factory (FCN) in Resende/RJ

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, Adriana A.A.; Silva, Ana Cristina L.; Pires, Flávia Cristina A.C., E-mail: adriana@inb.gov.br, E-mail: anaclsilva@inb.gov.br, E-mail: flaviapires@inb.gov.br [Indústrias Nucleares do Brasil (INB), Resende, RJ (Brazil)

    2017-07-01

    The Environmental Education Program (Programa de Educação Ambiental - PEA) of the Nuclear Fuel Factory (Fábrica de Combustível Nuclear - FCN) started in 2014 as part of the condition imposed by the Brazilian Environmental Regulatory Authority (IBAMA) for environmental licensing. The PEA for the local community aims to clarify the population about issues involving the company's activities and address potential environmental impacts that these activities may cause. The PEA for workers (PEAT) aims to promote environmental awareness, encourage good environmental practices and reinforce the importance of safety at work. By enlisting the participation of the employees and the local population, the study allowed the identification of the main issues of environmental aspects. Based on such research, the PEA prioritized the activities carried out at FCN and considered the following topics: environmental impacts, natural resources, waste generation, biodiversity, public policies, job generation and increase of real income and conservation units. The aim of this work is to share strategies and participative methodology as well as the achievements. In the context of the Corporative Social Responsibility, the implementation of the PEA is part of the company policy in accordance with its code of the ethics to support corporative programs with special focus on environmental preservation and the appreciation of the human being, besides providing transparent and true information to internal and external publics. The results in 2015 and 2016 demonstrated a participative management between the FCN and the local population in the districts of Areias/SP, Itatiaia/RJ and Resende/RJ. Besides that, the PEA enables to strengthen the corporative relations, to maintain a dialogue with the local community and to spread out the knowledge about nuclear technology. (author)

  11. The hidden Mediterranean diet: wild vegetables traditionally gathered and consumed in the Gargano area, Apulia, SE Italy

    OpenAIRE

    Nello Biscotti; Andrea Pieroni

    2015-01-01

    Despite the extensive bio-scientific literature concerning the Mediterranean diet, which emerged in the last three decades, systematic ethnography-centered investigations on a crucial portion of this food system, linked to the traditional consumption of non-cultivated vegetables, are still largely lacking in many areas of the Mediterranean Basin. In this research, an ethnobotanical field study focusing on wild vegetables traditionally gathered and consumed locally, was conducted ...

  12. "Os quatro cavaleiros de um íntimo apocalipse" e suas biografias vicárias: Fernando Sabino, Otto Lara Resende, Hélio Pellegrino e Paulo Mendes Campos na escrita de perfis

    Directory of Open Access Journals (Sweden)

    Gabriela Kvacek Betella

    2007-08-01

    Full Text Available Fernando Sabino, Otto Lara Resende, Hélio Pellegrino e Paulo Mendes Campos traçaram retratos de pessoas com as quais conviveram ao longo de suas vidas por meio de perfis concisos, seja na forma de elegias seja mesmo de necrológios. Embora esses textos sejam imprescindíveis para fundamentar o estilo de cada um dos escritores mineiros, eles também carregam a síntese de cada experiência pessoal, que é fundamental para a análise da crônica, gênero que o quarteto praticou e no qual podem ser enquadrados os perfis examinados neste ensaio.Fernando Sabino, Otto Lara Resende, Hélio Pellegrino and Paulo Mendes Campos wrote portraits of people with whom they were intimate along their lives by means of short profiles, either in the form of elegies or even of necrologies. Although these texts are necessary in order to set up the style of each one of these writers from Minas Gerais, they also carry the synthesis of each personal experience, which is fundamental for the analysis of the chronicle, a literary genre that the quartet of writers practiced and within which the profiles examined in this essay can be classified.

  13. Suprabenthic assemblages from the Capbreton area (SE Bay of Biscay). Faunal recovery after a canyon turbidity disturbance

    Science.gov (United States)

    Frutos, Inmaculada; Sorbe, Jean Claude

    2017-12-01

    In the Capbreton area, suprabenthic assemblages were sampled with a sledge towed over the bottom, at different sites located within the upper part of a 'gouf-type' canyon (8 hauls between 642 m and 797 m, on the axis of the thalweg or on flat perched flank terraces such as site K), on the northern adjacent open slope (2 hauls between 500 and 567 m) and on the northern adjacent shelf margin (2 hauls between 151 m and 158 m). A multivariate analysis carried on the faunal data discriminated different assemblages in this area: a near-canyon shelf assemblage (55 species, mainly amphipods and decapods; 3496 ind./100 m2, 40% mysids; dominant species: Nyctiphanes couchii, Leptomysis gracilis, Weswoodilla rectirostris, Anchialina agilis, Scopelocheirus hopei and Philocheras bispinosus); an open slope assemblage (111 species, mainly amphipods and isopods; 249 ind./100 m2, 36% amphipods; dominant species: Disconectes phalangium, Munnopsurus atlanticus and Boreomysis arctica); a canyon E assemblage (129 species, mainly amphipods, mysids and cumaceans; 1172 ind./100 m2, 58% amphipods; dominant species: Melphidippa sp. B, Chelator insignis); a canyon E' assemblage (107 species, mainly amphipods and mysids; 507 ind./100 m2, 73% amphipods; dominant species: Cleonardopsis carinata, Bonnierella abyssorum, Rhachotropis caeca and Arcturopsis giardi); and a temporary canyon assemblage at site K (34 species, mainly amphipods and mysids; 899 ind./100 m2, 85% amphipods; dominant species: Tmetomyx similis, Caeconyx caeculus, Nebalia sp. A and Cleonardopsis carinata). Site K was sampled only four months after a turbidity event, detected on sediment cores (18 cm thick Bouma sequence) taken during the same cruise and triggered by the violent storm ('ouragan Martin', wind up to 200 km/h) which affected the French Atlantic coast on 27 December 1999. The corresponding suprabenthic assemblage showed evidence of deep structural changes after this catastrophic event, characterized by relative low

  14. A-type and I-type granitoids and mylonitic granites of Hassan Salaran area of SE Saqqez, Kurdistan, Iran

    Science.gov (United States)

    Abdullah, Fakhraddin Mohammad; Saeed Ahmad, Sheler

    2014-05-01

    The Hassan Salarn area is located 20km to southeast of Saqqez city in Kurdistan Province, western Iran. In this area there are two distinct granitic rock suites consisting A-type and I-type granites and also mylonitic granites. These A-type and I-type granites have various petrological and geochemical characteristics. They also have different origins and petrogenesis. A-type granitoids comprise alkali feldspar granite, syenogranite and quartz alkali feldspar syenite, whereas I-type granitoids are composed of monzogranite, granodiorite and tonalite. Geochemically, A-type granitoids are peralkaline and acmite-normative but I-type granitoids are subalkaline (calc-alkaline), metaluminous and diopside-normative. A-type granitoids are also ferroan alkali and ferroan alkali-calcic whereas I-type granitoids are magnesian and calcic. A-type granitoids resemble to within plate granites and post-orogenic granites whereas I-type granitoids resemble to volcanic arc granites. A-type granitoids contain higher concentrations of alkalies, Zr, Rb, Nb, Y, Th, Ce, high FeO/MgO ratios and lower concentrations of Mg, Ca and Sr, resembling post-orogenic A-type granites. It is possible that heat from a mantle-derived magma which intruded into the lower crust, and/or rapid crustal extension have been essential generation of approriate melts producing A-type granitoids. Thus we can conclude that A-type granitoids were generated from a mixed mantle-crust source. Negative Nb anomalies and low contents of Ti and P probably indicate a subduction-related origin for protolith of I-type granitoids. Negative Nb anomalies and enrichment in Ce relative to its adjacent elements can be related to involvement of continental crust in magmatic processes. I-type granitoids are also enriched in Rb, Ba, K, Th, Ce and depleted in Nb, Zr and Y, indicating that they have had interacted with crust. I-type granitoids may result from contamination of mantle-derived magmas by continental crust during a subduction

  15. RESEND, Infinitely Dilute Point Cross-Sections Calculation from ENDF/B Resonance Parameter. ADLER, ENDF/B Adler-Adler Resonance Parameter to Point Cross-Sections with Doppler Broadening

    International Nuclear Information System (INIS)

    Bhat, M.R.; Ozer, O.

    1982-01-01

    1 - Description of problem or function: RESEND generates infinitely- dilute, un-broadened, point cross sections in the ENDF format by combining ENDF File 3 background cross sections with points calculated from ENDF File 2 resonance parameter data. ADLER calculates total, capture, and fission cross sections from the corresponding Adler-Adler parameters in the ENDF/B File 2 Version II data and also Doppler-broadens cross sections. 2 - Method of solution: RESEND calculations are done in two steps by two separate sections of the program. The first section does the resonance calculation and stores the results on a scratch file. The second section combines the data from the scratch file with background cross sections and prints the results. ADLER uses the Adler-Adler formalism. 3 - Restrictions on the complexity of the problem: RESEND expects its input to be a standard mode BCD ENDF file (Version II/III). Since the output is also a standard mode BCD ENDF file, the program is limited by the six significant figure accuracy inherent in the ENDF formats. (If the cross section has been calculated at two points so close in energy that only their least significant figures differ, that interval is assumed to have converged, even if other convergence criteria may not be satisfied.) In the unresolved range the cross sections have been averaged over a Porter-Thomas distribution. In some regions the calculated resonance cross sections may be negative. In such cases the standard convergence criterion would cause an unnecessarily large number of points to be produced in the region where the cross section becomes zero. For this reason an additional input convergence criterion (AVERR) may be used. If the absolute value of the cross section at both ends of an interval is determined to be less than AVERR then the interval is assumed to have converged. There are no limitations on the total number of points generated. The present ENDF (Version II/III) formats restrict the total number of

  16. Subglacial hydrology of the lake district ice lobe during the Younger Dryas (ca. 12 500 - 11 600 years ago) in the Kylaeniemi area, SE Finland

    Energy Technology Data Exchange (ETDEWEB)

    Lunkka, J. P.; Moisio, K.; Vainio, A. [Univ. of Oulu (Finland)

    2013-07-15

    It is essential to gain knowledge on the subglacial hydrological conditions at the glacier bed / bedrock interface when assessing how bedrock fracture zones affect subglacial melt water flow and in which subglacial zones pressurized and oxygen-rich melt water penetrates into the bedrock fracture systems. In the warm-based glacier zones, a part of subglacial melt water will penetrate deep into the fracture systems although the major part of melt water is drained to and beyond the ice margin via subglacial tunnel networks especially in the areas where ice is flowing on the crystalline bedrock. During the last deglaciation phase of the former Scandinavian Ice Sheet, glaciofluvial accumulations were deposited and these sediment accumulations are highly important when picturing the subglacial hydrology of different ice streams during deglaciation in the crystalline bedrock area. The aim of the present work was to map the bedrock fracture zones in the Kylaeniemi area and to shed light on the subglacial hydrology of the Scandinavian Ice Sheet's Lake District Ice Stream that occupied the Kylaeniemi area during the Younger Dryas between ca. 12 500 - 11 600 years ago. The special emphasis within this general aim was to study the relationship between bedrock fracture zones and the routes of subglacial drainage paths. The methods used to map and study bedrock fracture zones and subglacial drainage paths included remotes sensing methods, field observations, ground penetrating radar (GPR) investigations and GIS-based reconstructions. Conventional geological field methods aided by the GPR-method were also used to map bedrock exposures and their structures and to define the type of glaciofluvial sediments and glaciofluvial landform associations. Two main fracture zone sets occur in the study area. The most prominent bedrock fracture zone set trends NW-SE while the other, less prominent fracture zone set is aligned in NE-SW direction. The majority of the minor joint sets in

  17. Subglacial hydrology of the lake district ice lobe during the Younger Dryas (ca. 12 500 - 11 600 years ago) in the Kylaeniemi area, SE Finland

    International Nuclear Information System (INIS)

    Lunkka, J. P.; Moisio, K.; Vainio, A.

    2013-07-01

    It is essential to gain knowledge on the subglacial hydrological conditions at the glacier bed / bedrock interface when assessing how bedrock fracture zones affect subglacial melt water flow and in which subglacial zones pressurized and oxygen-rich melt water penetrates into the bedrock fracture systems. In the warm-based glacier zones, a part of subglacial melt water will penetrate deep into the fracture systems although the major part of melt water is drained to and beyond the ice margin via subglacial tunnel networks especially in the areas where ice is flowing on the crystalline bedrock. During the last deglaciation phase of the former Scandinavian Ice Sheet, glaciofluvial accumulations were deposited and these sediment accumulations are highly important when picturing the subglacial hydrology of different ice streams during deglaciation in the crystalline bedrock area. The aim of the present work was to map the bedrock fracture zones in the Kylaeniemi area and to shed light on the subglacial hydrology of the Scandinavian Ice Sheet's Lake District Ice Stream that occupied the Kylaeniemi area during the Younger Dryas between ca. 12 500 - 11 600 years ago. The special emphasis within this general aim was to study the relationship between bedrock fracture zones and the routes of subglacial drainage paths. The methods used to map and study bedrock fracture zones and subglacial drainage paths included remotes sensing methods, field observations, ground penetrating radar (GPR) investigations and GIS-based reconstructions. Conventional geological field methods aided by the GPR-method were also used to map bedrock exposures and their structures and to define the type of glaciofluvial sediments and glaciofluvial landform associations. Two main fracture zone sets occur in the study area. The most prominent bedrock fracture zone set trends NW-SE while the other, less prominent fracture zone set is aligned in NE-SW direction. The majority of the minor joint sets in

  18. SE PREVENINDO?

    Directory of Open Access Journals (Sweden)

    Ana Débora Assis Moura

    2010-01-01

    Full Text Available Este estudio tuvo como objetivo verificar el comportamiento de las prostitutas en relación a la prevención de enfermedades de transmisión sexual y del Síndrome de Inmunodeficiencia Adquirida-SIDA, así como investigar cómo se previenen de esas enfermedades. Se trata de una investigación exploratoria, con enfoque cualitativo, llevada a cabo en la Asociación de las Prostitutas en Ceará, Brazil, en septiembre de 2008, a través de una encuesta con 25 prostitutas. El análisis de los datos se hizo según el análisis de contenido, después de ser agrupados en cuatro categorías: conocimiento sobre las enfermedades de transmisión sexual/SIDA; convivencia con la(s enfermedad(es; prevención de la enfermedad de transmisión sexual/SIDA; y el uso de drogas. Se concluyó que las prostitutas no usan preservativos en todas las relaciones sexuales, por lo tanto, las enfermedades de transmisión sexual representan una realidad; la desinformación sobre la(s enfermedad(es es notable; el consumo de drogas lícitas e ilícitas es frecuente entre ellas, factor que las expone a situaciones más vulnerables con relación al VIH/SIDA.

  19. Influence of Cu(In,Ga)(Se,S)2 surface treatments on the properties of 30 × 30 cm2 large area modules with atomic layer deposited Zn(O,S) buffers

    International Nuclear Information System (INIS)

    Merdes, S.; Steigert, A.; Ziem, F.; Lauermann, I.; Klenk, R.; Hergert, F.; Kaufmann, C.A.; Schlatmann, R.

    2015-01-01

    We report the effect of Cu(In,Ga)(Se,S) 2 absorber surface treatments on the properties of atomic layer deposited-Zn(O,S) buffered 30 × 30 cm 2 large area modules. The absorber is prepared by the sequential process. H 2 O and KCN solution treatments are investigated. The absorber surface treatment is found to influence significantly the open circuit voltage and the fill factor of the full modules. Light soaking related metastabilities are also found to depend on the type of treatment. While both H 2 O and KCN treatments are efficient at removing Se-oxides and Na 2 HCO 3 , the KCN treatment is found to remove additionally Ga-oxides and elemental Se that are detected on the surface of the absorber. A 30 × 30 cm 2 module aperture efficiency up to 12.3% could be achieved with KCN surface treatment of the absorber. - Highlights: • The Cu(In,Ga)(Se,S) 2 surface influences the Zn(O,S)-buffered module performance. • Surface treatment by H 2 O efficiently removes Se-oxides and sodium compounds. • KCN treatment of the absorber removes Se-oxides, Ga-oxides and elemental Se. • The devices' light soaking behavior depends on the absorber's surface chemistry. • A 30 × 30 cm 2 module efficiency of 12.3% is achieved with KCN treatment

  20. Modulation of metallothionein, pi-GST and Se-GPx mRNA expression in the freshwater bivalve Dreissena polymorpha transplanted into polluted areas

    Directory of Open Access Journals (Sweden)

    Périne Doyen

    2015-04-01

    Full Text Available Glutathione S-transferases (GST, glutathione peroxidases (GPx and metallothioneins (MT are essential components of cellular detoxication systems. We studied the expression of pi-GST, Se-GPx, and MT transcripts in the digestive gland of Dreissena polymorpha exposed to organic and metallic pollutants. Mussels from a control site were transplanted during 3, 15 and 30 days into the Moselle River, upstream and downstream to the confluence with the Fensch River, a tributary highly polluted by polycyclic aromatic hydrocarbons and heavy metals. Se-GPx and pi-GST mRNA expression increased in mussels transplanted into the upstream site, Se-GPx response being the earliest. These genes were also induced after 3-days exposure at the downstream site. These inductions suggest an adaptative response to an alteration of the environment. Moreover, at this site, a significant decrease of the expression of MT, pi-GST and Se-GPx transcripts was observed after 30 days which could correspond to an inefficiency of detoxification mecanisms. The results are in correlation with the levels of pollutants in the sediments and their bioaccumulation in mussels, they confirm the environmental deleterious impact of the pollutants carried by the Fensch River.

  1. Seawater quality assessment and identification of pollution sources along the central coastal area of Gabes Gulf (SE Tunisia): Evidence of industrial impact and implications for marine environment protection.

    Science.gov (United States)

    El Zrelli, Radhouan; Rabaoui, Lotfi; Ben Alaya, Mohsen; Daghbouj, Nabil; Castet, Sylvie; Besson, Philippe; Michel, Sylvain; Bejaoui, Nejla; Courjault-Radé, Pierre

    2018-02-01

    Temperature, pH and trace elements (F, P, Cr, Cu, Zn, Cd, and Pb) contents were determined in 16 stations as well as in 2 industrial and 2 domestic discharge sources, in the central coastal area of the Gulf of Gabes. Compared to the northern and southern areas of the study area, the highest contents of contaminants were reached in the central area which hosts the coastal industrial complex. The seawater in this central area was also found to be acid and of higher temperature. Based on the Water Pollution Index results, an increasing degradation gradient of the seawater quality was revealed from northern and/or southern stations to central ones, categorized as 'strongly to seriously affected'. Phosphogypsum wastes dumped by the Tunisian Chemical Group (GCT) seem to have continuously degraded the seawater quality in the study area. A rapid intervention is needed to stop the effects on the marine environment. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Seagrass stems with attached roots from the type area of the Maastrichtian Stage (NE Belgium, SE Netherlands) : Morphology, anatomy, and ecological aspects

    NARCIS (Netherlands)

    van der Ham, R.W.J.M.; van Konijnenburg-van Cittert, J.H.A.; Jagt, J.W.M.; Indeherberge, L.; Meuris, R.; Deckers, M.J.M.; Renkens, S.; Laffineur, J.

    Seagrasses are the only seed plants to have invaded marine environments successfully. Seagrass fossils are both rare and have received scant attention so far. However, among the limited number of plant fossils from marine strata in the Maastrichtian type area, remains of seagrasses are relatively

  3. Behavior of uranium and thorium isotopes in soils of the Boreon area, Mercantour Massif (S.E. France). Leaching and weathering rate modeling

    International Nuclear Information System (INIS)

    Rezzoug, S.; Michel, H.; Barci-Funel, G.; Barci, V.; Fernex, F.

    2009-01-01

    Four cores were collected in weathered rocks and soils in the Boreon forest area (1765 m, Mercantour Massif, France). The samples were analyzed for the isotopes 230 Th, 232 Th, 234 U and 238 U. The activity and isotopic ratio profiles suggest that uranium was mobilized (leaching and precipitation) during the weathering process, as well as thorium but in a much less proportion. A model was drawn up to evaluate the U leaching rate and the time that some levels of the weathered rocks have been subjected to weathering. It utilizes LATHAM and SCHWARCZ's two equations,15 expressed as 234 U/ 238 U and 230 Th/ 238 U activity ratios, which assume that the alpha recoil effect allows easier leaching for 234 U than 238 U and no Th mobility. But this last assumption does not correspond to the observations made in the Boreon area, since it appears that in some soil deeper layers 230 Th and 228 Th are in radioactive deficit relatively to their parents. As there are four unknown quantities (the time, the leaching rates of 238 U, 234 U, 230 Th), the problem to be solved requires two more equations; these can be obtained utilizing the U activity ratio in water, and taking into account the 232 Th behavior. In some sites the 238 U leaching rate is high in deeper soil levels (near the fresh rocks); this would correspond to a loss of half the U amount in less than 24 000 years. (author)

  4. Impact of land-use change on soil degradation by establishment of terraces with subtropical orchards in sloping areas (Granada, SE Spain)

    International Nuclear Information System (INIS)

    Rodriguez Pleguezuelo, C. R.; Duran Zuzo, V. H.; Martin Peinado, F. J.; Franco Tarifa, D.

    2009-01-01

    In the coast of Granada, an intensive irrigated agriculture based on subtropical crops has been established. These trees have been planted in highly sloped areas, by the construction of terraces. In this fragile Mediterranean agroecosystem, the removal of native spontaneous vegetation cover and substitution by orchards, increase the susceptibility to soil degradation and eventually brings up the destruction of these structures by rainfall events. To study this net change, we monitored the soil loss and runoff over a two-year period in the taluses of terraces with a mature mango (Mangifera indica L.) orchard. The studied treatments were bare soil (BS) and spontaneous vegetation (NSV), each twice replicated. The erosion plots were 4 m x 4 m in area and were located in the taluses of orchard in the taluses of orchard terraces (65 degree centigrade slope). The average annual soil loss by erosion for BS and NSV was 2.5 and 0.3 Mg ha - 1 yr - 1, and for runoff 34.1 and 6.8 mm yr - 1, respectively. Therefore, soil erosion and runoff from BS plot were 8- and 5-times higher than in NSV, showing the importance of plant covers in the taluses of terraces in reducing this impact. Thus, the removal of plant cover from the taluses under these conditions, represent a high risk of slump and collapse, causing serious environmental and economic problems for farmers of subtropical crops. (Author) 11 refs.

  5. Impact of land-use change on soil degradation by establishment of terraces with subtropical orchards in sloping areas (Granada, SE Spain)

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez Pleguezuelo, C. R.; Duran Zuzo, V. H.; Martin Peinado, F. J.; Franco Tarifa, D.

    2009-07-01

    In the coast of Granada, an intensive irrigated agriculture based on subtropical crops has been established. These trees have been planted in highly sloped areas, by the construction of terraces. In this fragile Mediterranean agroecosystem, the removal of native spontaneous vegetation cover and substitution by orchards, increase the susceptibility to soil degradation and eventually brings up the destruction of these structures by rainfall events. To study this net change, we monitored the soil loss and runoff over a two-year period in the taluses of terraces with a mature mango (Mangifera indica L.) orchard. The studied treatments were bare soil (BS) and spontaneous vegetation (NSV), each twice replicated. The erosion plots were 4 m x 4 m in area and were located in the taluses of orchard in the taluses of orchard terraces (65 degree centigrade slope). The average annual soil loss by erosion for BS and NSV was 2.5 and 0.3 Mg ha{sup -}1 yr{sup -}1, and for runoff 34.1 and 6.8 mm yr{sup -}1, respectively. Therefore, soil erosion and runoff from BS plot were 8- and 5-times higher than in NSV, showing the importance of plant covers in the taluses of terraces in reducing this impact. Thus, the removal of plant cover from the taluses under these conditions, represent a high risk of slump and collapse, causing serious environmental and economic problems for farmers of subtropical crops. (Author) 11 refs.

  6. Hg contents in soils and olive-tree (Olea Europea, L.) leaves from an area affected by elemental mercury pollution (Jódar, SE Spain).

    Science.gov (United States)

    López-Berdonces, Miguel Angel; María Esbrí, José; Amorós, José Angel; Lorenzo, Saturnino; Fernández-Calderón, Sergio; Higueras, Pablo; Perez-de-los-Reyes, Caridad

    2014-05-01

    Data from soil and olive tree leaves around a decommissioned chlor-alkali plant are presented in this communication. The factory was active in the period 1977-1991, producing during these years a heavily pollution of Guadalquivir River and hydrargyrism in more than local 45 workers. It is located at 7 km South of Jódar, a locality with some 12,120 inhabitants. Mercury usage was general in this type of plants, but at present it is being replaced by other types of technologies, due to the risks of mercury usage in personal and environment. A soil geochemistry survey was carried out in the area, along with the analysis of olive-tree leaves (in the plots with this culture) from the same area. 73 soil samples were taken at two different depths (0-15 cm and 15-30 cm), together with 41 olive tree samples. Mercury content of geologic and biologic samples was determined by means of Atomic Absorption Spectrometry with Zeeman Effect, using a Lumex RA-915+ device with the RP-91C pyrolysis attachment. Air surveys were carried our using a RA-915M Lumex portable analytical device. Soil mercury contents were higher in topsoil than in the deeper soil samples, indicating that incorporation of mercury was due to dry and wet deposition of mercury vapors emitted from the plant. Average content in topsoil is 564.5 ng g-1. Hg contents in olive-tree leaves were in the range 46 - 453 ng g-1, with an average of 160.6 ng g-1. This level is slightly lower than tolerable level for agronomic crops established by Kabata-Pendias (2001) in 200 ng g-1. We have also compared soil and leaf contents for each sampling site, finding a positive and significant correlation (R=0.49), indicating that Hg contents in the leaves are linked to Hg contents in the soils. BAC (Bioaccumulation Absorption Coefficient, calculated as ratio between soil and leaf concentration) is 0.28 (consistent with world references, BAC = 0.7), considered "medium" in comparison with other mineral elements. Main conclusions of this

  7. Paleohydrogeological events recorded by stable isotopes, fluid inclusions and trace elements in fracture minerals in crystalline rock, Simpevarp area, SE Sweden

    International Nuclear Information System (INIS)

    Drake, Henrik; Tullborg, Eva-Lena

    2009-01-01

    Fracture minerals calcite, pyrite, gypsum, barite and quartz, formed during several events have been analysed for δ 13 C, δ 18 O, δ 34 S, 87 Sr/ 86 Sr, trace element chemistry and fluid inclusions in order to gain knowledge of the paleohydrogeological evolution of the Simpevarp area, south-eastern Sweden. This area is dominated by Proterozoic crystalline rocks and is currently being investigated by the Swedish Nuclear Fuel and Waste Management Co. (SKB) in order to find a suitable location for a deep-seated repository for spent nuclear fuel. Knowledge of the paleohydrogeological evolution is essential to understand the stability or evolution of the groundwater system over a time scale relevant to the performance assessment for a spent nuclear fuel repository. The ages of the minerals analysed range from the Proterozoic to possibly the Quaternary. The Proterozoic calcite and pyrite show inorganic and hydrothermal-magmatic stable isotope signatures and were probably formed during a long time period as indicated by the large span in temperatures (c. 200-360 deg. C) and salinities (0-24 wt.% eq. CaCl 2 ), obtained from fluid inclusion analyses. The Paleozoic minerals were formed from organically influenced brine-type fluids at temperatures of 80-145 deg. C. The isotopic results indicate that low temperature calcite and pyrite may have formed during different events ranging in time possibly from the end of the Paleozoic until the Quaternary. Formation conditions ranging from fresh to brackish and saline waters have been distinguished based on calcite crystal morphologies. The combination of δ 18 O and crystal morphologies show that the fresh-saline water interface has changed considerably over time, and water similar to the present meteoric water and brackish seawater at the site, have most probably earlier been residing in the bedrock. Organic influence and closed system in situ microbial activity causing disequilibrium are indicated by extremely low δ 13 C (down

  8. Contenha-se, se for capaz

    Directory of Open Access Journals (Sweden)

    Mirna Feitoza Pereira

    2008-11-01

    Full Text Available Em O Instinto da Linguagem, Steven Pinker discorre sobre sua célebre tese: a linguagem não é a mais prodigiosa invenção cultural humana. Ela é uma peça da constituição biológica do cérebro. A linguagem é uma habilidade complexa e especializada, que se desenvolve espontaneamente na criança, sem qualquer esforço consciente ou instrução formal, que se manifesta sem que se perceba sua lógica subjacente, que é qualitativamente a mesma em todo indiví­duo, e que difere de capacidades mais gerais de processamento de informações ou de comportamento inteligente. Para Pinker, a concepção de linguagem como um tipo de instinto transmite a idéia de que as pessoas sabem falar mais ou menos da mesma maneira que as aranhas sabem tecer suas teias. Ele apóia suas idéias em Darwin e Chomsky. Palavras-chave linguagem, gramática universal, evolução Abstract In Language Instinct, Steven Pinker argues about his famous thesis: language is not the most prodigious human cultural invention. It is a distinct piece of the biological constitution of the brain. Language is a complex, specialized skill, which develops spontaneously in the child, without conscious effort or formal instruction. It reveals itself without awareness of its underlying logic, which is qualitatively the same in every individual, and which is distinct from more general abilities of information processing of intelligent behavior. According to Pinker, the conception of language as a kind of instinct conveys the idea that people know how to talk in more or less the same way as spiders know how to spin webs. His thesis is founded in Darwin and Chomsky-s theories. Keywords language, universal grammar, evolution

  9. Future strategy of SE

    International Nuclear Information System (INIS)

    Arcelli, M.

    2006-01-01

    In this presentation author (General Director of Slovenske elektrarne, a. s.) presents structure and investment plans of SE. The feasibility study of construction of the blocks 3 and 4 of the Mochovce NPP is presented

  10. SE-VYZ

    International Nuclear Information System (INIS)

    Anon

    2004-01-01

    On this CD compact disc 6 video-films (A-1 NPP; Bituminization; Cementation; Pressing; The Interim spent fuel storage facility; Transport into the National radioactive waste repository Mochovce; Ignition; and Vitrification). In these films process of radioactive waste treatment in the Bohunice Radioactive Waste Processing Center (SE-VYZ) is presented. 2 presentations about radioactive wastes treatment in the SE-VYZ are included

  11. SE debt restructuring plan

    International Nuclear Information System (INIS)

    Janoska, J.

    2003-01-01

    Slovenske elektrarne, a.s. (SE) plans to restructure one's own debts in 2003-2005. Debt restructuring plan is following: 2003: Collection of pre-payment on electricity - 60 million Euro (2.5 billion Slovak crowns), consumer unknown. Own promissory notes in total value of 100 million US$ (3.5 billion Slovak crowns) - in process. Sale of claims worth 2.4 billion Slovak crowns (57.21 million Euro) - negotiations in process. 2003/2004: Restructuring of loans payable IV. quarter 2003 and at the beginning of 2004 in value of 200 million Euro (8.3 billion Slovak crowns). Aim of SE is a new credit payable within 7 years, with instalments payable in the last two to three without any state subsidies. 2005: Loans worth 460 million Euro (189 billion Slovak crowns) will still remain. SE want to negotiate them with banks without state support

  12. Autismos que se 'curan'

    OpenAIRE

    Artigas, Josep, 1948-; Paula Pérez, Isabel, 1970-

    2016-01-01

    Introducción. La investigación sobre el autismo, basada principalmente en el modelo categórico del Manual diagnóstico y estadístico de los trastornos mentales, se ha centrado de forma preferente en la epidemiología, las manifestaciones clínicas, los mecanismos cognitivos y los determinantes biológicos y ambientales; sin embargo, se ha prestado escaso interés a las trayectorias evolutivas, las cuales son decisivas de cara al pronóstico a medio y largo plazo. Objetivo. Revisar el curso evolutiv...

  13. Se comunican los investigadores

    OpenAIRE

    Rafael Roncagliolo

    2015-01-01

    En Brasil se reunieron los investigadores de la comunicación de América Latina y del mundo (1992) El encuentro Latinoamericano fue en Embú-Guacú, poblado de la periferia de Sao Paulo, y el encuentro Mundial en Guarujá, balneario cercano al Puerto de Santos. La amplitud de la participación y la diversidad de temas y enfoques son indicios del desarrollo y dinamismo de la profesión.

  14. Se comunican los investigadores

    Directory of Open Access Journals (Sweden)

    Rafael Roncagliolo

    2015-01-01

    Full Text Available En Brasil se reunieron los investigadores de la comunicación de América Latina y del mundo (1992 El encuentro Latinoamericano fue en Embú-Guacú, poblado de la periferia de Sao Paulo, y el encuentro Mundial en Guarujá, balneario cercano al Puerto de Santos. La amplitud de la participación y la diversidad de temas y enfoques son indicios del desarrollo y dinamismo de la profesión.

  15. ZnSe/ZnSeTe Superlattice Nanotips

    Directory of Open Access Journals (Sweden)

    Young SJ

    2010-01-01

    Full Text Available Abstract The authors report the growth of ZnSe/ZnSeTe superlattice nanotips on oxidized Si(100 substrate. It was found the nanotips exhibit mixture of cubic zinc-blende and hexagonal wurtzite structures. It was also found that photoluminescence intensities observed from the ZnSe/ZnSeTe superlattice nanotips were much larger than that observed from the homogeneous ZnSeTe nanotips. Furthermore, it was found that activation energies for the ZnSe/ZnSeTe superlattice nanotips with well widths of 16, 20, and 24 nm were 76, 46, and 19 meV, respectively.

  16. Interaction of Se and GaSe with Si(111)

    International Nuclear Information System (INIS)

    Meng, Shuang; Schroeder, B. R.; Olmstead, Marjorie A.

    2000-01-01

    Deposition of Se and GaSe on Si(111)7x7 surfaces was studied with low-energy electron diffraction, x-ray photoelectron spectroscopy, and x-ray photoelectron diffraction to probe initial nucleation and interface structure for GaSe/Si(111) heteroepitaxy. Room-temperature deposition of Se on Si(111)7x7 results in an amorphous film. Subsequent annealing leads to Se evaporation without ordering or interdiffusion. Se deposition at 450 degree sign C saturates at submonolayer coverage with no diffusion of Se into the substrate. There is no clear evidence of ordered sites for the Se. Growth of GaSe on Si(111)7x7 above 500 degree sign C results in a pseudomorphic bilayer, with Si-Ga-Se bonding. Additional GaSe does not stick to the bilayer above 525 degree sign C. The resulting Se lone pair at the surface leads to an ideally passivated surface similar to As/Si(111). This stable surface is similar to the layer termination in bulk GaSe. The single domain bilayer is oriented with the Ga-Se bond parallel to the substrate Si-Si bond. (c) 2000 The American Physical Society

  17. Exploring SE for Android

    CERN Document Server

    Confer, William

    2015-01-01

    This book is intended for developers and engineers with some familiarity of operating system concepts as implemented by Linux. A basic background in C code would be helpful. Their positions range from hobbyists wanting to secure their Android powered creations to OEM engineers building handsets to engineers of emerging areas where Android is seeing growth.

  18. Effect of nonstoichiometry properties of CuInSe2

    International Nuclear Information System (INIS)

    Rogacheva, E.I.; Tavrina, T.V.

    1997-01-01

    The homogeneity area size of the CuInSe 2 semiconductor compound is determined by the (CuIn)-Se profile of the Cu-In-Se ternary system at 350 deg C. The microhardness and thermo-electromotive force dependences on Se content are studied after various kind of thermal treatment. Interpretation of the results obtained is given with and account of defects formation character by deviations from stoichiometry [ru

  19. Extended analyses of Se VII and Se VIII

    International Nuclear Information System (INIS)

    Vankleef, Th.A.M.; Joshi, Y.N.

    1984-01-01

    Joshi et al. (1984) have conducted an analysis of the 3d8 4s-3d8 4p transitions in As VII. The present investigation is concerned with an analysis of similar transitions in Se VIII. The selenium spectrum was photographed in the 400-1200-A wavelength region on a variety of normal-incidence spectrographs. Attention is given to least-squares-fit (LSF) and Hartree-Fock (HF) parameter values for the 3d9 4d configuration of Se VII, LSF and HF parameter values for the 3d8 4s and 3d8 4p configurations of Se VIII, the energy and composition of the levels of the 3d9 4d configuration of Se VII, classified lines in Se VII, energy levels and composition of the 3d8 4s configuration and the revised and newly determined levels of the 3d8 4p configuration of Se VIII, and newly classified lines of Se VIII. 15 references

  20. PHEIFFER SE TAALPOLITIEK JC Steyn

    African Journals Online (AJOL)

    sigself maak tog nie Chomsky se teorie oor n aangebore taalaanleg en die konsekwensie daarvan nl. dat elke taal opgebou moet wees volgens dieselfde grondprinsipes, ongeldig nie? Taalpolitieke oortuigingskrag het hierdie argument nog minder. Sal jy in alle erns vir mense kan se: "Ons moet aanhou om die taal te praat ...

  1. Sample Set (SE): SE10 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE10 Effect of phosphorus nutrition for cabbage metabolites Investigation of Brassi...ca oleracea var. capitata Hatukoi leaf metabolites. 3 growth conditions (high, low and no phosphorus nutrition

  2. Sample Set (SE): SE30 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE30 Comparison of seed metabolites among soybean varieties Investigation of Glycine max. green seed metabol...ites. 3 varieties (Kamogawashichiri, Koitozairai, Tanbakuro) data are examined. Tak

  3. Sample Set (SE): SE13 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE13 Comparison of leaf metabolites among spinach varieties Investigation of Spinacia oleracea leaf metaboli...tes. 4 cultivers (Nihon, Kanaji, Kurohaminstarland and Wasesaradaakari) and 3 repli

  4. Sample Set (SE): SE31 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE31 Comparison of seed metabolites among eggplant fruit tissues Investigation of S...olanum melongena Senryounigou metabolites. 3 tissues (flesh, fruit, peel) data are examined. Takeshi Ara 1,

  5. Sample Set (SE): SE28 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE28 Comparison of leaf metabolites among developmental stages of Hevea brasiliensi...s Investigation of Hevea brasiliensis leaf metabolites. 4 developmental stages and 6 replicates data are exa

  6. Sample Set (SE): SE53 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE53 Covering chemical diversity of genetically-modified tomatoes using metabolomics...signature. We conclude that multi-platform metabolomics is an approach that is both sensitive and robust and

  7. Sample Set (SE): SE26 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE26 Effect of compost for cabbage metabolites Investigation of Brassica oleracea v...ar. capitata YR Seisyun leaf metabolites. 2 growth conditions (with or without 6t compost treatment) and 3 r

  8. Sample Set (SE): SE20 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE20 Arabidopsis thaliana leaf metabolite analysis for a software test Investigatio...es that were investigated to optimize the parameters of PowerGet software for better metabolite annotation i

  9. Sample Set (SE): SE16 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE16 Effect of agricultural films for spinach leaf metabolites 2 Investigation of S...pinacia oleracea leaf metabolites. 3 growth conditions (covered with normal or UV cut agricultural film or no agricultura

  10. Sample Set (SE): SE14 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE14 Effect of agricultural films for tomato fruit metabolites Investigation of Sol...anum lycopersicum fruit metabolites. 3 growth conditions (covered with normal or UV cut agricultural film or no agricultura

  11. Sample Set (SE): SE18 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available in by Orbitrap MS and automated search engine Lipid Search A comprehensive and precise identification of pho...SE18 Global identification of phospholipid molecular species in mouse liver and bra

  12. Quantitative analysis of Terminal Restriction Fragment Length Polymorphism (T-RFLP microbial community profiles: peak height data showed to be more reproducible than peak area Análise quantitativa de perfis de T-RFLP de comunidades microbianas: dados de altura de picos mostraram-se mais reprodutíveis do que os de área

    Directory of Open Access Journals (Sweden)

    Roberto A. Caffaro-Filho

    2007-12-01

    Full Text Available Terminal Restriction Fragment Length Polymorphism (T-RFLP is a culture-independent fingerprinting method for microbial community analysis. Profiles generated by an automated electrophoresis system can be analysed quantitatively using either peak height or peak area data. Statistical testing demontrated that peak height data showed to be more reproducible than peak area data.Terminal Restriction Fragment Length Polymorphism (T-RFLP é um método molecular, independente de cultivo, para análise de comunidades microbianas. Perfis gerados por um sistema automatizado de eletroforese podem ser analisados quantitativamente usando dados de altura ou área dos picos. Os dados de altura mostraram-se mais reprodutíveis do que os de área.

  13. Señas Mexicano

    Directory of Open Access Journals (Sweden)

    Juan F. García Mejía

    2007-01-01

    Full Text Available En este artículo se muestra un sistema que permite el estudio y práctica del Lenguaje de Señas Mexicano (LMS, el cual es el método de comunicación de las personas que padecen un trastorno de procesamiento auditivo. El sistema propuesto en este artículo consta de un guante de tela instrumentado con sensores de flexión, una etapa de acondicionamiento de señales y una tarjeta de adquisición de datos; que en su conjunto constituyen el Hardware. El software esta formado por un programa de adquisición de datos y una interfaz de usuario, ambos codificados en Visual Basic Net. El sistema propuesto se modela por medio del lenguaje de modelado unificado (UML, ya que Visual Basic es un lenguaje orientado a eventos.

  14. Porøse materialer

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan de Place

    2000-01-01

    Dette undervisningsnotat er en samling af noter, der refererer til den indledende del af kurset Materialmekanik og Porøse materailer på Insitut for Bærende Konstruktiner og Materialer (BKM).......Dette undervisningsnotat er en samling af noter, der refererer til den indledende del af kurset Materialmekanik og Porøse materailer på Insitut for Bærende Konstruktiner og Materialer (BKM)....

  15. Sample Set (SE): SE50 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available oids We report that flavonoids with radical scavenging activity mitigate against ox...ress. These data confirm the usefulness of flavonoids for enhancing both biotic and abiotic stress tolerance...SE50 Enhancement of oxidative and drought tolerance in arabidopsis by overaccumulation of antioxidant flavon

  16. Sample Set (SE): SE59 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available idopsis thaliana (Arabidopsis). However, the behavior of flavonoids during drough...t stress is still not well documented. Herein we investigated the time-series alternation of flavonoids in t...vonoids, a class of specialized metabolites, including flavonols and anthocyanins w...SE59 Alternation of flavonoid accumulation under drought stress in Arabidopsis thaliana We reported that fla

  17. Sample Set (SE): SE27 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE27 Effect of agricultural films for cabbage leaf metabolites Investigation of Bra...ssica oleracea var. capitata YR Tenkuu leaf metabolites. 3 growth conditions (covered with normal or UV cut agricultura...l film or no agricultural film), 3 replicates data are examined. Takeshi Ara 1, Naoki Yamamoto 1,

  18. Sample Set (SE): SE52 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE52 Mass spectra-based framework for automated structural elucidation of metabolom...e data to explore phytochemical diversity A novel framework for automated elucidation of metabolite structur...te ontology system was also introduced to attain putative characterization of the metabolite signals.The automate

  19. Ud at se med Erasmus

    DEFF Research Database (Denmark)

    Frandsen, Pernille

    2009-01-01

    Få lidt luft under vingerne, kom ud at møde udenlandske kolleger og se, hvordan man også kan lave uddannelsesbibliotek. Med begejstring fortæller tre bibliotekarer om deres oplevelser i det store udland – alt sammen finansieret af Erasmus.......Få lidt luft under vingerne, kom ud at møde udenlandske kolleger og se, hvordan man også kan lave uddannelsesbibliotek. Med begejstring fortæller tre bibliotekarer om deres oplevelser i det store udland – alt sammen finansieret af Erasmus....

  20. Ud & se - med Claude Monet

    DEFF Research Database (Denmark)

    Bonde, Lisbeth

    2015-01-01

    Udstillingen 'Claude Monet - Lost in Translation - på ARoS stiller ind på Claud Monet og hans samtidige malerkolleger. Udstillingen forsøger at "genlæse" Monet fra et samtidskunstnerisk perspektiv - og vurderer hans indsats, inden hans værker er blevet reproduceret ihjel....

  1. X = S, Se, Te) heterostructures

    KAUST Repository

    Zhang, Qingyun; Schwingenschlö gl, Udo

    2018-01-01

    Using first-principles calculations, we investigate the electronic properties of the two-dimensional GaX/MX2 (M = Mo, W; X = S, Se, Te) heterostructures. Orbital hybridization between GaX and MX2 is found to result in Rashba splitting at the valence

  2. Sample Set (SE): SE47 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE47 Metabolomic correlation-network modules in Arabidopsis based on a graph-cluste...as a system. Typical metabolomics data show a few but significant correlations among metabolite levels when ...itions. Although several studies have assessed topologies in metabolomic correlation networks, it remains un... (mto1), and transparent testa4 (tt4) to compare systematically the metabolomic correlation...s in samples of roots and aerial parts. We then applied graph clustering to the constructed correlation

  3. Hablando se entiende la gente

    Directory of Open Access Journals (Sweden)

    Mila Crespo Picó

    2012-08-01

    Full Text Available Habiendo observado que muchos cursos centrados en el desarrollo de la competencia comunicativa oral se limitan a ofrecer actividades inconexas que suponen un gran esfuerzo por parte de los participantes para situarse ante cada actividad y dificultan el establecimiento de relaciones profundas entre los exponentes nociofuncionales, los objetivos comunicativos y los recursos lingüísticos necesarios para realizarlas por contar con un tiempo limitado en el aula para ello, se presentó, bajo el mismo título que esta comunicación, una propuesta didáctica para un curso de conversación que pretende paliar estos aspectos en el I Foro de Profesores de E/LE en la Universitat de València.

  4. Die verpleegster se terapeutiese funksie

    Directory of Open Access Journals (Sweden)

    D.C. Harrington

    1980-09-01

    Full Text Available Ons sou hierdie praatjie graag wou inlei met Virginia Henderson se definisie van verpleging: “ The unique function of the nurse is to assist the individual, sick or well, in the performance of those activities contributing to health or its recovery (or to a peaceful death that he would perform unaided if he had the necessary will, strength or knowledge. And to do this in such a way as to help him gain independence as rapidly as possible.”

  5. The synthesis and photocatalytic activity of ZnSe microspheres

    International Nuclear Information System (INIS)

    Cao Huaqiang; Xiao Yujiang; Zhang Sichun

    2011-01-01

    This paper reports the synthesis of semiconductor ZnSe microspheres composed of nanoparticles via a solvothermal route between the organic molecule selenophene (C 4 H 4 Se) and ZnCl 2 without adding any surfactant. The ZnSe microspheres were characterized by x-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), specific surface area measurement, and photoluminescence (PL) spectra. A strong and broad blue PL emission at 443 nm in wavelength (∼2.79 eV in photon energy) is attributed to the near-band-edge (NBE) emission of ZnSe, while the 530 nm peak is a defect-related (DL) emission. The photocatalytic activity of the as-prepared ZnSe microspheres was evaluated by photodegradation of methyl orange (MO) dye under ultraviolet (UV) light and visible light irradiation. The degradations of MO reach 94% or 95.1%, close to 100%, in the presence of the as-synthesized ZnSe microspheres or commercial ZnSe powder after 7 or 10 h under UV irradiation, respectively. Meanwhile the degradations of MO reach 94.3% or 60.6% in the presence of the as-synthesized ZnSe microspheres or commercial ZnSe powder after 12 h, respectively. The degradation rate of ZnSe microspheres is twice that of ZnSe commercial powder under UV light irradiation, and three times under visible light irradiation. The degradation process of MO dye on ZnSe microspheres under UV or visible light is also discussed.

  6. Optical studies of CdSe/HgSe and CdSe/Ag2Se core/shell nanoparticles embedded in gelatin

    International Nuclear Information System (INIS)

    Azhniuk, Yu M; Dzhagan, V M; Valakh, M Ya; Raevskaya, A E; Stroyuk, A L; Kuchmiy, S Ya; Zahn, D R T

    2008-01-01

    CdSe/HgSe and CdSe/Ag 2 Se core-shell nanoparticles are obtained by colloidal synthesis from aqueous solutions in the presence of gelatin. Optical absorption, luminescence, and Raman spectra of the nanoparticles obtained are measured. The variation of the optical spectra of CdSe/HgSe and CdSe/Ag 2 Se core-shell nanoparticles with the shell thickness is discussed. Sharp non-monotonous variation of the photoluminescence spectra at low shell coverage is observed.

  7. Structural and optical properties of CdSe nanosheets

    Science.gov (United States)

    Solanki, Rekha Garg; Rajaram, P.; Arora, Aman

    2018-04-01

    Nanosheets of CdSe have been synthesized using a solvothermal route using citric acid as an additive. It is found that the citric acid effectively controls the structural and optical properties of CdSe nanostructures. XRD studies confirm the formation of hexagonal wurtzite phase of CdSe. The FESEM micrographs show that the obtained CdSe nanocrystals are in the form of very thin sheets (nanosheets). Optical absorption studies as well as Photoluminescence spectra show that the optical gap is around 1.76 eV which is close to the reported bulk value of 1.74 eV. The prepared CdSe nanosheets because of large surface area may be useful for catalytic activities in medicine, biotechnology and environmental chemistry and in biomedical imaging for in vitro detection of a breast cancer cells.

  8. Selenium Se and tellurium Te

    International Nuclear Information System (INIS)

    Busev, A.I.; Tiptsova, V.G.; Ivanov, V.M.

    1978-01-01

    The basic methods for determining selenium and tellurium in various objects are presented. The bichromatometric determination of Te in cadmium, zinc and mercury tellurides is based on oxidation of Te(4) to (6) in H 2 SO 4 with potassium bichromate. In steels, Te is determined photometrically with the aid of KI. The determination is hindered by Fe(3), Cu(2), Bi(3) and Se(4) ions, which must be separated. The extraction-photometric determination of Te in native sulfur is carried out with the aid of 5-mercapto-3-(naphthyl-2)-1,3,4-thiadiazolthione-2 (pH=4.8-5.0). The dyed complex is readily extracted with chloroform and benzene. The spectrophotometric determination of Te in selenium is performed with the aid of 3,5-diphenylpyrazoline-1-dithiocarbamate of sodium. Te is determined in commercial indium, arsenic and their semiconductor compounds photometrically with the aid of copper diethyldithiocarbamate. The method permits determining 5x10 -5 % Te in a weighed amount of 0.5 g. The chloride complex of Te(4) with diantipyriodolpropylmethane is quantitatively extracted with dichloroethane from hydrochloric acid solutions. Thus, any amounts of Te can be separated from Se and determined photometrically. The extraction-photometric determination of Te in commercial lead and bismuth is carried out with the aid of pyrazolone derivatives, in commercial copper with the aid of diantipyridolpropylmethane, and in ores (more than 0.01% Te) with the aid of bismuthol 2. Also described is the extraction-polarographic determination of Te in sulfide ores

  9. Se metallomics during lactic fermentation of Se-enriched yogurt.

    Science.gov (United States)

    Palomo, María; Gutiérrez, Ana M; Pérez-Conde, M Concepción; Cámara, Carmen; Madrid, Yolanda

    2014-12-01

    Selenium biotransformation by lactic acid bacteria during the preparation of Se-enriched yogurt was evaluated. The study focused on the distribution of selenium in the aqueous soluble protein fraction and the detection of selenoamino acids. Screening of selenium in Tris-buffer-urea soluble fraction was carried out by sodium dodecyl sulphate polyacrylamide gel electrophoresis after pre-fractionating with asymmetric field flow fractionation using inductively coupled plasma-mass spectrometry as the detector. Selenium-containing fractions were identified by peptide mapping using nano LC-ESI/LTQMS. Proteins such as thioredoxin, glutaredoxin, albumin, β-lactoglobulin, and lactoperoxidase were identified in the selenium-containing fraction. All these proteins were detected in both the control and the selenium-enriched yogurt except chaperones, which were only detected in the control samples. Chaperones are heat-shock proteins expressed in response to elevated temperature or other cellular stresses. Selenium may have an effect on chaperones expression in Lactobacillus. For the amino acids analysis, selenocysteine was the primary seleno-containing species. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. Phase diagram of the Sb-Se-I system and thermodynamic properties of SbSeI

    International Nuclear Information System (INIS)

    Aliev, Z.S.; Musaeva, S.S.; Babanly, D.M.; Shevelkov, A.V.; Babanly, M.B.

    2010-01-01

    The Sb-Se-I system was investigated by using the DTA and XRD analyses and EMF measurements with an antimony electrode. The T-x diagram of the binary Sb-I system was accurately redefined. A number of polythermal sections and the projection of the liquidus surface were constructed. The fields of the primary crystallization, as well as the types and coordinates of non- and monovariant equilibria were determined. It is shown that the quasi-binary sections Sb 2 Se 3 -SbI 3 , Sb-SbSeI, SbI 3 -Se, and SbSeI-Se triangulate the Sb-Se-I system, leading to five independent subsystems. A broad area of immiscibility, that overlaps a certain part of the antimony primary crystallization field, was found. From the EMF measurements, the partial molar functions of antimony (ΔG-bar, ΔH-bar, ΔS-bar) as well as standard integral thermodynamic functions of SbSeI were calculated. The latter were found to have the following values: ΔG f,298 0 =-80.12±1.81kJ/mol; ΔH f,298 0 =-77.3±1.8kJ/mol; S 298 0 =155.2±9.5J/(molK).

  11. Phase diagram of the Sb-Se-I system and thermodynamic properties of SbSeI

    Energy Technology Data Exchange (ETDEWEB)

    Aliev, Z S; Musaeva, S S; Babanly, D M [Baku State University, General and Inorganic Chemistry Department (Azerbaijan); Shevelkov, A.V., E-mail: shev@inorg.chem.msu.r [Moscow Lomonosov State University, Chemistry Department (Russian Federation); Babanly, M.B., E-mail: Babanly_mb@rambler.r [Baku State University, General and Inorganic Chemistry Department (Azerbaijan)

    2010-09-03

    The Sb-Se-I system was investigated by using the DTA and XRD analyses and EMF measurements with an antimony electrode. The T-x diagram of the binary Sb-I system was accurately redefined. A number of polythermal sections and the projection of the liquidus surface were constructed. The fields of the primary crystallization, as well as the types and coordinates of non- and monovariant equilibria were determined. It is shown that the quasi-binary sections Sb{sub 2}Se{sub 3}-SbI{sub 3}, Sb-SbSeI, SbI{sub 3}-Se, and SbSeI-Se triangulate the Sb-Se-I system, leading to five independent subsystems. A broad area of immiscibility, that overlaps a certain part of the antimony primary crystallization field, was found. From the EMF measurements, the partial molar functions of antimony ({Delta}G-bar, {Delta}H-bar, {Delta}S-bar) as well as standard integral thermodynamic functions of SbSeI were calculated. The latter were found to have the following values: {Delta}G{sub f,298}{sup 0}=-80.12{+-}1.81kJ/mol; {Delta}H{sub f,298}{sup 0}=-77.3{+-}1.8kJ/mol; S{sub 298}{sup 0}=155.2{+-}9.5J/(molK).

  12. Bio-fortification and isotopic labelling of Se metabolites in onions and carrots following foliar application of Se and 77Se

    DEFF Research Database (Denmark)

    Kápolna, Emese; Laursen, Kristian H.; Husted, Søren

    2012-01-01

    Se. The 77Se- labelled metabolites in onions were predominantly γ-glutamyl-77Se-selenomethyl-selenocysteine (γ-glu-Me77SeCys), 77Se-methylselenocysteine (Me77SeCys) and 77Se-selenomethionine (77SeMet). Furthermore, we report here for the first time the finding in carrots of the bioactive Me77SeCys...

  13. PbSe nanocubes obtained by high-energy milling

    Energy Technology Data Exchange (ETDEWEB)

    Rojas-Chavez, H., E-mail: hrojasc@ipn.mx [Centro de Investigacion en Ciencia Aplicada y Tecnologia Avanzada - IPN (Mexico); Reyes-Carmona, F. [Facultad de Quimica - UNAM (Mexico); Achimovicova, M. [Slovak Academy of Sciences, Institute of Geotechnics (Slovakia); Daneu, N. [Jozef Stefan Institute, Department for Nanostructured Materials (Slovenia); Jaramillo-Vigueras, D. [Centro de Investigacion e Innovacion Tecnologica - IPN (Mexico)

    2012-06-15

    In this study, PbSe nanocubes were obtained by high-energy milling, and their optical properties were investigated by measuring the UV-VIS-IR spectra in the range of 200-2,000 nm. The optical absorption of all samples showed a strong UV emission band at 1.45 eV. Previously, to obtain only PbSe nanocubes, an intermediate phase was identified, PbSeO{sub 3}. Although both PbSeO{sub 3} and PbSe were traced through this study, a major effort is devoted to characterize the latter. To trace how chemical transitions evolve from precursors to PbSe, X-ray diffraction and Rietveld refinement were carried out. Therefore, the following parameters were evaluated as a function of milling time: phase percentages, area-to-volume ratio, average crystallite dimensions, specific surface area, and morphology changes. To corroborate previous findings, nitrogen adsorption and transmission electron microscopy techniques were used. All the set experimental results unambiguously confirm that crystallites show a cubic morphology, with its average crystallite size distribution being around 24 nm.

  14. Phase diagram of Se-CaIn4Se7 system

    International Nuclear Information System (INIS)

    Musaeva, R.I.; Aliev, I.I; Ismailova, F.I; Aliev, A.A

    2011-01-01

    Full text: The Se-CaIn 4 Se 7 system has been studied using methods of differential thermal analysis, X-ray diffraction, micro structural analysis, density measurements and its phase diagram has been constructed. It has been established that the section Se-CaIn 4 Se 7 is a quasibinary section of the ternary system Ca-In-Se. At room temperature, on the basis of CaIn 2 Se 4 and Se no solid solution has been found

  15. Variational approach to 68 Se

    International Nuclear Information System (INIS)

    Petrovici, A.; Schmid, K.W.; Faessler, A.; Baktash, C.; Shashi, P.

    1999-01-01

    . Furthermore, our results concerning the pair structure of the wave functions of the even-spin states in chains of even-even and odd-odd N = Z nuclei in the A 60 - 80 mass region revealed a clear interplay between isovector neutron-proton and like-nucleon pairing correlations. Nevertheless, detailed aspects of these properties are sensitive to the renormalization of the effective interaction in the pairing channels. Taking advantage of our microscopic investigations on the coexistence phenomena in this mass region, which have already past many experimental tests, we address the problem of the structure of the lowest few even-spin positive-parity states in 68 Se. Also we present details of the results obtained using a few slightly different prescriptions for the effective interaction in order to illustrate the above mentioned problems. The theoretical spectrum of 68 Se for even spin positive parity states is compared with the experimental results. (authors)

  16. American Indian/ Alaska Native Area/ Hawaiian Homeland Areas for Socorro County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  17. American Indian/ Alaska Native Area/ Hawaiian Homeland Areas for Bernalillo County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  18. American Indian/ Alaska Native Area/ Hawaiian Homeland Areas for Catron County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  19. American Indian/ Alaska Native Area/ Hawaiian Homeland Areas for Valencia County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  20. American Indian/ Alaska Native Area/ Hawaiian Homeland Areas for Lincoln County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  1. American Indian/ Alaska Native Area/ Hawaiian Homeland Areas for Taos County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  2. Ocean to continent transfer of atmospheric Se as revealed by epiphytic lichens

    International Nuclear Information System (INIS)

    Wen Hanjie; Carignan, Jean

    2009-01-01

    There is still a long-term debate concerning the relative contributions of naturally emitted and anthropogenic Se at the regional and local scales. Here, Se and heavy metal concentrations are reported for epiphytic lichens collected in coastal and inland areas from the USA, Canada and France for assessing atmospheric Se source. Correlations found between Se and Cl in lichens confirmed the major marine biogenic source for atmospheric Se. Continental samples do not show systematic relationships between Se and other metal (Pb, Cu, In ...) contents, even for lichens collected in the vicinity of smelters or close to urban areas. Our results suggest that, although anthropogenic Se may be present, the marine biogenic Se source is a major contributor to atmospheric Se for our sampling locations. The contribution of naturally emitted atmospheric Se may be significant in urban and industrial areas and should be taken into account for further studies. - Although anthropogenic Se may be present, the contribution of naturally emitted atmospheric Se may be significant in urban and industrial areas and should be taken into account for further studies.

  3. The Ag2Se-HgSe-GeSe2 system and crystal structures of the compounds

    International Nuclear Information System (INIS)

    Parasyuk, O.V.; Gulay, L.D.; Romanyuk, Ya.E.; Olekseyuk, I.D.; Piskach, L.V.

    2003-01-01

    The phase diagram of the quasi-ternary Ag 2 Se-HgSe-GeSe 2 system at 298 K was investigated using X-ray phase analysis and metallography. The formation of five intermediate quaternary phases β (Ag ∼7.12-∼6.32 Hg ∼0.44-∼0.82 GeSe 6 ), γ (Ag ∼6.08-∼4.00 Hg ∼0.96-∼2.00 GeSe 6 ), δ (Ag 3.4 Hg 2.3 GeSe 6 ), ε (Ag ∼2.24-∼2.00 Hg ∼2.88-∼3.00 GeSe 6 ) and ∼Ag 1.4 Hg 1.3 GeSe 6 was established. The crystal structure of the β-phase (for the Ag 6.504 Hg 0.912 GeSe 6 composition) was determined using X-ray single crystal diffraction. It crystallizes in a cubic structure (space group F4-bar 3m) with the lattice parameter a=1.09026(4) nm. The crystal structure of the δ-phase (Ag 3.4 Hg 2.3 GeSe 6 ) was determined using X-ray powder diffraction (space group F4-bar 3m, a=1.07767(8) nm). The crystal structure determination of the γ-phase (space group Pmn2 1 ) was performed for the compositions Ag 5.6 Hg 1.2 GeSe 6 , Ag 4.8 Hg 1.6 GeSe 6 and Ag 4 Hg 2 GeSe 6 using X-ray powder diffraction. The crystal structure of the LT-Hg 2 GeSe 4 compound (space group I4-bar , a=0.56786(2), c=1.12579(5) nm) was confirmed by powder diffraction also.

  4. Relação entre solo, vegetação e topografia em área de cerrado (Parque Estadual de Vassununga, SP: como se expressa em mapeamentos? The relationship among soil, vegetation and topography in a cerrado area (Vassununga State Park, SP: how well is it expressed in maps ?

    Directory of Open Access Journals (Sweden)

    Patricia Guidão Cruz Ruggiero

    2006-06-01

    Full Text Available Foram investigadas as relações entre mapas de fitofisionomias, solos e topografia, na Gleba Pé-de-Gigante (21º37'30''S; 47º37'30''W, SP. A área estudada constitui a planície de inundação do córrego Paulicéia e colinas no entorno, onde predominam fisionomias de cerrado, havendo também manchas de floresta estacional, floresta ripária e campo úmido, sobre solos predominantemente arenosos. As cartas temáticas analisadas compreenderam: a mapa pré-existente de fisionomias de vegetação, b mapa hipsométrico, baseado em curvas de nível de 5 em 5 m e c mapa de solos, feito a partir de dados químicos e físicos do solo (amostras coletadas em 54 pontos, nas profundidades: 0-5, 5-25, 40-60 e 80-100 cm e fotografias aéreas (1988, 1:40.000. Os mapas foram re-classificados, para se obter diferentes níveis de detalhamento, e cruzados, em sistema de informação geográfica. Nas tabelas de contingência, geradas a partir dos cruzamentos, foi aplicado o teste de Qui-quadrado e obtido o valor de correlação de Cramér, para investigar a relação entre os mapeamentos. A floresta estacional semidecídua se mostrou fortemente associada à classe geral de Latossolos, e o campo cerrado às altitudes de 620-650 m, provavelmente associado à dinâmica sub-superficial da água. O detalhamento da informação mapeada nos temas analisados não garantiu melhores resultados à interpretação de suas relações, pois as classes fitofisionômicas não respondem diretamente, nem isoladamente, à topografia ou à classificação usual dos solos.Relationships among vegetation, soil and topography maps were investigated in the Pé-de-Gigante Reserve (21º37'30''S; 47º37'30''W, SP. The studied area is the Paulicéia river basin, where soils are predominantly sandy and the vegetation includes a gradient of savanna physiognomies and patches of semideciduous forest, wet fields, and riparian forest. The cartographic material included: a pre-existent vegetation

  5. Clean Energy Solutions Center and SE4All: Partnering to Support Country Actions

    Energy Technology Data Exchange (ETDEWEB)

    2016-05-01

    Since 2012, the Clean Energy Solutions Center (Solutions Center) and Sustainable Energy for All (SE4All) have partnered to deliver information, knowledge and expert assistance to policymakers and practitioners in countries actively working to achieve SE4All objectives. Through SE4All efforts, national governments are implementing integrated country actions to strategically transform their energy markets. This fact sheet details the Solutions Center and SE4All partnership and available areas of technical assistance.

  6. Local structure and defect chemistry of [(SnSe)1.15]m(TaSe2) ferecrystals – A new type of layered intergrowth compound

    International Nuclear Information System (INIS)

    Grosse, Corinna; Atkins, Ryan; Kirmse, Holm; Mogilatenko, Anna; Neumann, Wolfgang; Johnson, David C.

    2013-01-01

    Highlights: •The crystal structure of [(SnSe) 1.15 ] m (TaSe 2 ) ferecrystals was analyzed by TEM. •The layers exhibit turbostratic disorder, but we also observed a local ordering. •The structures of the SnSe and TaSe 2 layers are similar to binary SnSe and 2H-TaSe 2 . •An increasing in-plane SnSe grain size with increasing m was observed. •Defect areas with missing, substituted or additional layers were found. -- Abstract: The atomic structure of the family of ferecrystals [(SnSe) 1.15 ] m (TaSe 2 ) (m = 1, 3, and 6) was investigated by means of transmission electron microscopy. The tantalum in the TaSe 2 layers was observed to have trigonal prismatic coordination similar to that found in the 2H polytype of bulk TaSe 2 . The structure of the SnSe constituent was found to be similar to that of orthorhombic α-SnSe. In the compounds with m = 1 and m = 3, regions with a local ordering of the layers along a commensurate axis, similar to the ordering in conventional misfit layer compounds, were observed. However, on a longer range the ferecrystals were found to exhibit a turbostratically disordered structure. Stacking defects were occasionally found in the samples in which a layer is interrupted and the surrounding layers are bent around these defects, while maintaining abrupt interfaces instead of interdiffusing. Volume defects were found in one sample of [(SnSe) 1.15 ] 1 (TaSe 2 ) 1 in which a SnSe layer locally substitutes a part of a TaSe 2 layer without interrupting the surrounding layers

  7. Capacitors on the basis of intercalate GaSe

    Directory of Open Access Journals (Sweden)

    Kovalyuk Z. D.

    2010-06-01

    Full Text Available The compound GaSe is obtained by the technique of intercalation of a GaSe single crystal in a melt of the ferroelectric salt KNO3. The x-ray analysis of its crystal structure has been carried out and dielectric frequency characteristics of samples has been measured. It is estab-lished, that accumulation of electric charges occurs in the examined examples in frequency area 100—1000 Hz. A sample of filter capacitor has been created on the basis of the re-ceived compounds.

  8. Pulsed laser deposited heterogeneous mixture of Li2Se-Sb2Se3 nanocomposite as a new storage lithium material

    International Nuclear Information System (INIS)

    Yu Le; Chen Jie; Fu Zhengwen

    2010-01-01

    Li 2 Se-Sb 2 Se 3 nanocomposites with a highly heterogeneous mixture have been fabricated by reactive pulsed laser deposition method. The electrochemical properties of the as-deposited Li 2 Se-Sb 2 Se 3 thin film during the first charging and discharging have been investigated by the galvanostatic cycling and cyclic voltammetry measurements for the first time. By using ex situ X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), and selected-area electron diffraction (SAED) measurements, the decomposition of Li 2 Se driven by Sb 2 Se 3 under the electrochemical potential is revealed. In the first cycle, the oxidation peaks at 2.5 V and 3.2 V and the reduction peaks at 2.0 V can be attributed to the decomposition and formation of Li 2 Se with the conversion reaction of Sb 2 Se 3 into Sb 2 Se 5 . Our findings demonstrate that nanocomposite Li 2 Se-Sb 2 Se 3 can possess very high electrochemical activity. These results present a special case of solid-state heterogeneous electrochemistry with both nanostructured binary materials.

  9. Semiconductor-metal transition of Se in Ru-Se Catalyst Nanoparticles

    Science.gov (United States)

    Babu, P. K.; Lewera, Adam; Oldfield, Eric; Wieckowski, Andrzej

    2009-03-01

    Ru-Se composite nanoparticles are promising catalysts for the oxygen reduction reaction (ORR) in fuel cells. Though the role of Se in enhancing the chemical stability of Ru nanoparticles is well established, the microscopic nature of Ru-Se interaction was not clearly understood. We carried out a combined investigation of ^77Se NMR and XPS on Ru-Se nanoparticles and our results indicate that Se, a semiconductor in elemental form, becomes metallic when interacting with Ru. ^77Se spin-lattice relaxation rates are found to be proportional to T, the well-known Korringa behavior characteristic of metals. The NMR results are supported by the XPS binding energy shifts which suggest that a possible Ru->Se charge transfer could be responsible for the semiconductor->metal transition of Se which also makes Ru less susceptible to oxidation during ORR.

  10. One-step synthesis of PbSe-ZnSe composite thin film

    Directory of Open Access Journals (Sweden)

    Abe Seishi

    2011-01-01

    Full Text Available Abstract This study investigates the preparation of PbSe-ZnSe composite thin films by simultaneous hot-wall deposition (HWD from multiple resources. The XRD result reveals that the solubility limit of Pb in ZnSe is quite narrow, less than 1 mol%, with obvious phase-separation in the composite thin films. A nanoscale elemental mapping of the film containing 5 mol% PbSe indicates that isolated PbSe nanocrystals are dispersed in the ZnSe matrix. The optical absorption edge of the composite thin films shifts toward the low-photon-energy region as the PbSe content increases. The use of a phase-separating PbSe-ZnSe system and HWD techniques enables simple production of the composite package.

  11. Cs2UPd3Se6

    Directory of Open Access Journals (Sweden)

    George N. Oh

    2011-02-01

    Full Text Available Dicaesium uranium(IV tripalladium(II hexaselenide, Cs2UPd3Se6, crystallizes in the space group Fmmm in the Ba2NaCu3O6 structure type. The asymmetric unit comprises the following atoms with site symmetries as shown: U1 (mm2, Cs1 (222, Cs2 (m2m, Pd1 (.m., Pd2 (2mm, Se1 (m.., and Se2 (1. This layered structure contains six edge-sharing square-planar [PdSe4] units that form a hexagon. These, in turn, edge-share with [USe6] trigonal–prismatic units, forming an extended layer parallel to (010. The layers are stacked along [010]. They are staggered, and are separated by the Cs atoms. The Cs atoms are either coordinated in a square antiprism of Se atoms or are ten-coordinate, with one square face and the opposite face hexagonal.

  12. C-type Nd2Se3

    Directory of Open Access Journals (Sweden)

    2009-03-01

    Full Text Available The title compound, neodymium sesquiselenide, is isotypic with the other known rare-earth metal(III selenides M2Se3 (M = La–Pr and Sm–Lu with the cubic C-type structure. It adopts a cation-defective Th3P4-type arrangement with close to 8/9 of the unique neodymium-cation site occupied, leading to the composition Nd2.667Se4 (Z = 4 or Nd2Se3 (Z = 5.333, respectively. The Nd3+ cations are thus surrounded by eight selenide anions, forming trigonal [NdSe8]13− dodecahedra, whereas the Se2− anions exhibit a sixfold coordination, but due to the under-occupation of neodymium, each one is statistically surrounded by only 5.333 cations. The crystal studied was a merohedral twin with a 0.31 (6:0.69 (6 domain ratio.

  13. Synthesis and characterization of ZnSe:Fe/ZnSe core/shell nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Lin; Zhu, Jianguo, E-mail: yanglin_1028@163.com; Xiao, Dingquan

    2014-04-15

    High-quality ZnSe:Fe/ZnSe core/shell nanocrystals were prepared via a hydrothermal microemulsion technique. Effective surface passivation of monodisperse ZnSe:Fe nanocrystals is achieved by overcoating them with a ZnSe shell. The samples were characterized by means of XRD, EDX, TEM, PSD, XPS, photoluminescence, and Raman spectrum. The results show that the as-synthesized nanocrystals are cubic zinc blende ZnSe structure with high purity and the average particle size of ZnSe:Fe/ZnSe core/shell nanocrystal is larger than that of ZnSe:Fe core. The growth of ZnSe shell causes a small red shift in PL spectra, and then the PL quantum yield (QY) increases from 16% before shell growth to the maximum of 37% after increasing shell thickness up to 1.2 monolayers (ML). Moreover, both transverse optic (TO) and longitudinal optic (LO) phonon modes of ZnSe are shifted toward lower frequency as compared with the reported ones. -- Highlights: • ZnSe:Fe/ZnSe core/shell QDs were prepared by a hydrothermal microemulsion method. • ZnSe shell efficiently passivates surface defects by serving as a physical barrier. • The particle size and PL properties can be turned with the growth of ZnSe shell. • The luminescence efficiency and stability of QDs could be improved in this manner.

  14. Freshwater flux to Sermilik Fjord, SE Greenland

    Directory of Open Access Journals (Sweden)

    S. H. Mernild

    2010-10-01

    Full Text Available Terrestrial inputs of freshwater flux to Sermilik Fjord, SE Greenland, were estimated, indicating ice discharge to be the dominant source of freshwater. A freshwater flux of 40.4 ± 4.9×109 m3 y−1 was found (1999–2008, with an 85% contribution originated from ice discharge (65% alone from Helheim Glacier, 11% from terrestrial surface runoff (from melt water and rain, 3% from precipitation at the fjord surface area, and 1% from subglacial geothermal and frictional melting due to basal ice motion. The results demonstrate the dominance of ice discharge as a primary mechanism for delivering freshwater to Sermilik Fjord. Time series of ice discharge for Helheim Glacier, Midgård Glacier, and Fenris Glacier were calculated from satellite-derived average surface velocity, glacier width, and estimated ice thickness, and fluctuations in terrestrial surface freshwater runoff were simulated based on observed meteorological data. These simulations were compared and bias corrected against independent glacier catchment runoff observations. Modeled runoff to Sermilik Fjord was variable, ranging from 2.9 ± 0.4×109 m3 y−1 in 1999 to 5.9 ± 0.9×109 m3 y−1 in 2005. The sub-catchment runoff of the Helheim Glacier region accounted for 25% of the total runoff to Sermilik Fjord. The runoff distribution from the different sub-catchments suggested a strong influence from the spatial variation in glacier coverage, indicating high runoff volumes, where glacier cover was present at low elevations.

  15. EPR of SeO2- and SeO3- radicals in alkaline borate glasses with 77Se isotope

    International Nuclear Information System (INIS)

    Galimov, D.G.; Tarzimanov, K.D.

    1977-01-01

    Alkaline borate glasses with 77 Se were investigated in order to establish the nature of selenium compounds and radicals in glasses. The relationship between alkali ions and the oxygen radical of selenium was determined by decoding the hyperfine structure of the alkaline borate glass EPR spectra obtained before and after γ-irradiation. The irradiated and non-irradiated glasses were characterized by hyperfine splitting of the EPR lines from the α- and β centres. Moreover, the irradiated samples were noted to have a line doublet (signal phi). With intenser reduction conditions of glass fusion, the intensities of α, β, and phi signals were noted to decline. This confirmes the suggestion that these centres were caused by oxygen compouds. The authors concluded that α and β signals were due to the paramagnetic centres of SeO 2 - and [SeO 2 - ]R + , and phi signal to the SeO 3 - radicals

  16. Speciation of Se and DOC in soil solution and their relation to Se bioavailability.

    Science.gov (United States)

    Weng, Liping; Vega, Flora Alonso; Supriatin, Supriatin; Bussink, Wim; Van Riemsdijk, Willem H

    2011-01-01

    A 0.01 M CaCl(2) extraction is often used to asses the bioavailability of plant nutrients in soils. However, almost no correlation was found between selenium (Se) in the soil extraction and Se content in grass. The recently developed anion Donnan membrane technique was used to analyze chemical speciation of Se in the 0.01 M CaCl(2) extractions of grassland soils and fractionation of DOC (dissolved organic carbon). The results show that most of Se (67-86%) in the extractions (15 samples) are colloidal-sized Se. Only 13-34% of extractable Se are selenate, selenite and small organic Se (<1 nm). Colloidal Se is, most likely, Se bound to or incorporated in colloidal-sized organic matter. The dominant form of small Se compounds (selenate, selenite/small organic compounds) depends on soil. A total of 47-85% of DOC is colloidal-sized and 15-53% are small organic molecules (<1 nm). In combination with soluble S (sulfur) and/or P (phosphor), concentration of small DOC can explain most of the variability of Se content in grass. The results indicate that mineralization of organic Se is the most important factor that controls Se availability in soils. Competition with sulfate and phosphate needs to be taken into account. Further research is needed to verify if concentration of small DOC is a good indicator of mineralization of soil organic matter.

  17. On Some Physical Properties of GeSe3-Sb2Se3-ZnSe Thin Films and Their Radiation Response

    International Nuclear Information System (INIS)

    Hosni, H.M.M.A.

    2010-01-01

    Thin films of the chalcogenides GeSe 3 , Sb 2 Se 3 , ZnSe, (GeSe 3 )80(Sb 2 Se 3 )20 and (GeSe 3 )70(Sb 2 Se 3 )10(ZnSe)20, are prepared by thermal evaporation onto glass substrates. The effect of ZnSe incorporation with both GeSe 3 , Sb 2 Se 3 results in amorphous (GeSe 3 )70(Sb 2 Se 3 )10(ZnSe)20 composition as obtained from the X-ray analysis. Electrical measurements reveal a decrease in dc activation energy, ΔEdc, and an increase in ac activation energy, ΔEac, for (GeSe 3 )70(Sb 2 Se 3 )10(ZnSe)20 as compared with (GeSe 3 )80(Sb 2 Se 3 )20. Optical energy gap, Eg, and band tail width, Ee, are estimated in UV/VIS spectral region for fresh and γ-irradiated films, revealing a decrease in Eg and an increase in Ee for ZnSe and (GeSe 3 )70(Sb 2 Se 3 )10(ZnSe)20 compositions, with irradiation dose.

  18. Excitons, biexcitons, and phonons in ultrathin CdSe/ZnSe quantum structures

    DEFF Research Database (Denmark)

    Gindele, F.; Woggon, Ulrike; Langbein, Wolfgang Werner

    1999-01-01

    The optical properties of CdSe nanostructures grown by migration-enhanced epitaxy of CdSe on ZnSe are studied by time-, energy-, and temperature-dependent photoluminescence and excitation spectroscopy, as well as by polarization-dependent four-wave mixing and two-photon absorption experiments...

  19. Controllable synthesis of metal selenide heterostructures mediated by Ag2Se nanocrystals acting as catalysts

    Science.gov (United States)

    Zhou, Jiangcong; Huang, Feng; Xu, Ju; Wang, Yuansheng

    2013-09-01

    Ag2Se nanocrystals were demonstrated to be novel semiconductor mediators, or in other word catalysts, for the growth of semiconductor heterostructures in solution. This is a result of the unique feature of Ag2Se as a fast ion conductor, allowing foreign cations to dissolve and then to heterogrow the second phase. Using Ag2Se nanocrystals as catalysts, dimeric metal selenide heterostructures such as Ag2Se-CdSe and Ag2Se-ZnSe, and even multi-segment heterostructures such as Ag2Se-CdSe-ZnSe and Ag2Se-ZnSe-CdSe, were successfully synthesized. Several interesting features were found in the Ag2Se based heterogrowth. At the initial stage of heterogrowth, a layer of the second phase forms on the surface of an Ag2Se nanosphere, with a curved junction interface between the two phases. With further growth of the second phase, the Ag2Se nanosphere tends to flatten the junction surface by modifying its shape from sphere to hemisphere in order to minimize the conjunct area and thus the interfacial energy. Notably, the crystallographic relationship of the two phases in the heterostructure varies with the lattice parameters of the second phase, in order to reduce the lattice mismatch at the interface. Furthermore, a small lattice mismatch at the interface results in a straight rod-like second phase, while a large lattice mismatch would induce a tortuous product. The reported results may provide a new route for developing novel selenide semiconductor heterostructures which are potentially applicable in optoelectronic, biomedical, photovoltaic and catalytic fields.Ag2Se nanocrystals were demonstrated to be novel semiconductor mediators, or in other word catalysts, for the growth of semiconductor heterostructures in solution. This is a result of the unique feature of Ag2Se as a fast ion conductor, allowing foreign cations to dissolve and then to heterogrow the second phase. Using Ag2Se nanocrystals as catalysts, dimeric metal selenide heterostructures such as Ag2Se-CdSe and Ag2Se-ZnSe

  20. Como Perseu se defendeu de Medusa?

    Directory of Open Access Journals (Sweden)

    Rose Lumertz de Freitas

    2012-04-01

    Full Text Available Na psicanálise francesa, principalmente com Lacan, o conceito de falta passou a ser de grande importância. Ao que, então, perguntamos: o que é a falta? E quando esta falta? O que acontece? O que acontece quando o não especularizável não está excluído, se fazendo, assim, especular? Quando Perseu vai ao encontro de Medusa, guiando-se por sua imagem refletida em um espelho de bronze polido, segurado por Atena, como pôde este herói defender-se de Medusa? Qual foi a forma encontrada por ele para se defender da presença do objeto que introduz a dimensão do real nu?

  1. Solving the shape conundrum in $^{70}$Se

    CERN Multimedia

    We propose a multi-step Coulomb-excitation study of $^{70}$Se at HIE-ISOLDE using the $^{208}$Pb( $^{70}$Se, $^{70}$Se*)$^{208}$Pb* reaction at a safe energy of 5.0 MeV/u. We aim at a precise measurement of the $\\left \\langle 2^{+}_{1} \\hspace{0.1cm} || \\hspace{0.1cm}\\hat{E}2 \\hspace{0.1cm} || \\hspace{0.1cm}2^{+}_{ 1} \\right \\rangle$ diagonal matrix element as well as gaining information on additional matrix elements. Such information will shed light onto the shape conundrum of the 2$^{+}_{1}$ state in $^{70}$Se as well as foreseeing the opportunity for a more detailed understanding of the shape-coexistence phenomenon in this region.

  2. Thermoelectric prospects of chemically deposited PbSe and SnSe thin films

    Science.gov (United States)

    Nair, P. K.; Martínez, Ana Karen; Rosa García Angelmo, Ana; Barrios Salgado, Enue; Nair, M. T. S.

    2018-03-01

    Thin films of PbSe of 400-600 nm in thickness, were obtained via chemical deposition from a solution containing lead nitrate, thiourea and selenosufate. SnSe thin films of 90-180 nm in thickness, were also obtained by chemical deposition from a solution containing selenosulfate. Optical and electrical properties of these thin films were significantly altered by heating them in selenium vapor at 300 °C. Thin film PbSe has a bandgap (Eg) of 1.17 eV (direct gap, forbidden transitions), which decreases to 0.77 eV when it has been heated. Its electrical conductivity (σ) is p-type: 0.18 Ω-1 cm-1 (as-prepared), and 6.4 Ω-1 cm-1 when heated. Thin film SnSe is of orthorhombic crystalline structure which remains stable when heated at 300 °C, but its Eg increases from 1.12 eV (indirect) in as-prepared film to 1.5 eV (direct, forbidden transitions) upon heating. Its electrical conductivity is p-type, which increases from 0.3 Ω-1 cm-1 (as-prepared) to 1 Ω-1 cm-1 when heated (without Se-vapor). When SnSe film is heated at 300 °C in the presence of Se-vapor, they transform to SnSe2, with Eg of 1.5 eV (direct, forbidden) with n-type electrical conductivity, 11 Ω-1 cm-1. The Seebeck coefficient for the PbSe films is: +0.55 mV K-1 (as prepared) and +0.275 mV K-1 (heated); for SnSe films it is: +0.3 mV K-1 (as prepared) and +0.20 mV K-1 (heated); and for SnSe2 film, - 0.35 mV K-1. A five-element PbSe-SnSe2-PbSe-SnSe2-PbSe thermoelectric device demonstrated 50 mV for a temperature difference ΔT = 20 °C (2.5 mV K-1). For SnSe-SnSe2-SnSe-SnSe2-SnSe device, the value is 15 mV for ΔT = 20 °C (0.75 mV K-1). Prospect of these thin films in thermoelectric devices of hybrid materials, in which the coatings may be applied on distinct substrate and geometries is attractive.

  3. Lustre filesystem for CMS storage element (SE)

    International Nuclear Information System (INIS)

    Wu, Y; Kim, B; Avery, P; Fu, Y; Bourilkov, D; Taylor, C; Prescott, C; Rodriguez, J

    2011-01-01

    This paper presents our effort to integrate the Lustre filesystem with BeStMan, GridFTP and Ganglia to make it a fully functional WLCG SE (Storage Element). We first describe the configuration of our Lustre filesystem at the University of Florida and our integration process. We then present benchmark performance figures and IO rates from the CMS analysis jobs and the WAN data transfer performance that are conducted on the Lustre SE.

  4. The system SnTe-InSe

    International Nuclear Information System (INIS)

    Gurshumov, A.P.; Alidzhanov, M.A.; Aliev, A.S.; Gadzhiev, T.G.; Mamedov, N.A.

    1986-01-01

    This paper discusses the nature of the interaction and physicochemical properties of the alloys of the system SnTe-InSe. The DTA was performed on an NTR-74 pyrometer, XPA on a Dron-2.0 diffractometer and MSA on an MIM-7 metallographic microscope. The microhardness of the samples was determined on a PMT-3 microhardness tester. The congruently melting compound SnInTeSe and solid solutions based on the starting components are formed in the system

  5. Los jóvenes se incomunican

    Directory of Open Access Journals (Sweden)

    Margarita Ferro

    2015-01-01

    Full Text Available Hace años los jóvenes se comunicaban y relacionaban con sus amigos del barrio o de la escuela por lo que desde pequeños desarrollaban una comunicación interpersonal fluida. Hoy los video-juegos han sustituido la amistad y se han transformado en elementos de la comunicación. La autora analiza el mundo del nintendo y su influencia en las personas

  6. Control Areas

    Data.gov (United States)

    Department of Homeland Security — This feature class represents electric power Control Areas. Control Areas, also known as Balancing Authority Areas, are controlled by Balancing Authorities, who are...

  7. The determination of Se content in Se egg by NAA in MNSR

    International Nuclear Information System (INIS)

    Wang Ke; Hou Xiaolin

    1994-01-01

    The selenium contents in the yolk, albumin and shell of the egg which was laid by layer hen fed with various Se concentrations are determined by thermal neutron activation analysis with a nuclear reaction 78 Se(n, γ) 77 Se m on the miniature neutron source reactor (MNSR). The results show that the more the selenium added to the feed, the higher the Se content in the egg and that in the egg constituents, the highest Se content is in the egg yolk and the lowest in the egg albumin

  8. Thermoelectric transport of Se-rich Ag2Se in normal phases and phase transitions

    International Nuclear Information System (INIS)

    Mi, Wenlong; Lv, Yanhong; Qiu, Pengfei; Shi, Xun; Chen, Lidong; Zhang, Tiansong

    2014-01-01

    Small amount of Se atoms are used to tune the carrier concentrations (n H ) and electrical transport in Ag 2 Se. Significant enhancements in power factor and thermoelectric figure of merit (zT) are observed in the compositions of Ag 2 Se 1.06 and Ag 2 Se 1.08 . The excessive Se atoms do not change the intrinsically electron-conducting character in Ag 2 Se. The detailed analysis reveals the experiment optimum carrier concentration in Ag 2 Se is around 5 × 10 18  cm −3 . We also investigate the temperature of maximum zT and the thermoelectric transport during the first order phase transitions using the recently developed measurement system

  9. Measurement of 76Se and 78Se (γ, n) cross sections

    International Nuclear Information System (INIS)

    Kitatani, Fumito; Harada, Hideo; Goko, Shinji; Utsunomiya, Hiroaki; Akimune, Hidetoshi; Toyokawa, Hiroyuki; Yamada, Kawakatsu

    2011-01-01

    The (γ, n) cross sections of Se isotopes ( 76 Se, 78 Se) were measured to supply fundamental data for estimating the inverse reaction cross section, i.e., the 79 Se(n, γ) 80 Se cross section. The enriched samples and a reference 197 Au sample were irradiated with laser-Compton scattering (LCS) γ-rays. The excitation function of each (γ, n) cross section was determined for the energy range from each near neutron separation energy to the threshold energy of (γ, 2n) reaction. The energy point corresponding to each cross section was deduced using the accurately determined energy distribution of LCS γ-rays. Systematic (γ, n) cross sections for Se isotopes including 80 Se were compared with those calculated by using a statistical model calculation code TALYS. (author)

  10. Hopping conduction in gamma-irradiated InSe and InSe:Sn single crystals

    International Nuclear Information System (INIS)

    MUSTAFAEVA, S.N.; ISMAILOV, A.A.; ASADOV, M.M.

    2010-01-01

    Full text : The semiconductive InSe layer compound is characterized by a strong covalent bond inside the layers and a weak Van der Waals bonding between them. It was shown that across the layers of InSe single crystals at low temperatures (T ≤ 200 K) at direct current (dc) hopping conduction through localized states near the Fermi level takes place. The results of dc-conductivity of gamma-irradiated p-InSe and n-InSe : Sn layer single crystals have been presented in this work. ρ-InSe single crystal specimens grown by the Bridgman method were used in the experiments. Plates of the crystals under study were obtained by cleaving along the layers of single crystal ingots. The single-crystal InSe samples for electric measurements had the form of planar capacitors normal to the C axis of the crystals, with silver-paste electrodes. The thickness of the InSe samples was 300 mkm. Co 60 serves as the source of irradiation with energy of gamma-quantum equal to 1.3 MeV. The electric properties of non-irradiated and gamma-irradiated InSe crystals were measured under the same conditions. It is revealed that InSe and InSe : Sn (0.2 and 0.4 mole percent Sn) single crystals exhibit a variable range hopping conduction along a normal to their natural layers at temperatures T≤200 K in a dc electric field. From experimental data the parameters of localized states of p-InSe and n-InSe : Sn were calculated before and after gamma-irradiation. It is revealed that gamma-irradiation of p-InSe and n-InSe : Sn (0.2 and 0.4 mole percent Sn) single crystals leads to significant change of localized states parameters. After gamma-irradiation the density of states near the Fermi level increased, but their energy spread and the average jump distance decreased. The concentrations of radiated defects were estimated in p-InSe (5.18*10 1 7 sm - 3) and n-InSe : Sn (2.5*10 1 7 - 2.7*10 1 8 sm - 3) single crystals. The present results demonstrate that gamma-irradiation offers the possibility of tuning

  11. ¿ Como se hace una Telenovela ?

    Directory of Open Access Journals (Sweden)

    Iván Gavaldón

    2015-01-01

    Full Text Available La autora relata la historia de las Relaciones Públicas y dice que surgieron y se desarrollaron para legitimar ante el público los intereses económicos y políticos de quienes detentan el poder. Se cuestiona sobre el por qué no aplicar las relaciones públicas, en organizaciones populares, para que mejoren su publicación y orienten sus propósitos de desarrollo. El tema que aborda las Políticas culturales en América Latina acopia un extracto de lo más trascendente de los ensayos del libro editado por Néstor García Canclini. Sobre la telenovela se afirma que esta ha llegado a ser uno de los instrumentos más importantes de la comunicación popular: por ella desfilan las identidades de las más variadas culturas brasileñas. Y en cuanto a la caricatura se relata lo que ocurrió en el Seminario taller " Caricatura y Periodismo", realizado el(9-11 de Nov.- 1987 en el CIESPAL. El estudio sobre el mercado del vídeo se ve dificultado por la imprecisión de los datos obtenidos. Los datos oficiales no siempre se aproximan a la realidad, pues el mercado de vídeo se instauró en América Latina partiendo de una lógica totalmente diversa de los equipos de sonido e imagen.

  12. PbSe Nanocrystal Excitonic Solar Cells

    KAUST Repository

    Choi, Joshua J.

    2009-11-11

    We report the design, fabrication, and characterization of colloidal PbSe nanocrystal (NC)-based photovoltaic test structures that exhibit an excitonic solar cell mechanism. Charge extraction from the NC active layer is driven by a photoinduced chemical potential energy gradient at the nanostructured heterojunction. By minimizing perturbation to PbSe NC energy levels and thereby gaining insight into the "intrinsic" photovoltaic properties and charge transfer mechanism of PbSe NC, we show a direct correlation between interfacial energy level offsets and photovoltaic device performance. Size dependent PbSe NC energy levels were determined by cyclic voltammetry and optical spectroscopy and correlated to photovoltaic measurements. Photovoltaic test structures were fabricated from PbSe NC films sandwiched between layers of ZnO nanoparticles and PEDOT:PSS as electron and hole transporting elements, respectively. The device current-voltage characteristics suggest a charge separation mechanism that Is distinct from previously reported Schottky devices and consistent with signatures of excitonic solar cells. Remarkably, despite the limitation of planar junction structure, and without film thickness optimization, the best performing device shows a 1-sun power conversion efficiency of 3.4%, ranking among the highest performing NC-based solar cells reported to date. © 2009 American Chemical Society.

  13. A transferable force field for CdS-CdSe-PbS-PbSe solid systems

    Science.gov (United States)

    Fan, Zhaochuan; Koster, Rik S.; Wang, Shuaiwei; Fang, Changming; Yalcin, Anil O.; Tichelaar, Frans D.; Zandbergen, Henny W.; van Huis, Marijn A.; Vlugt, Thijs J. H.

    2014-12-01

    A transferable force field for the PbSe-CdSe solid system using the partially charged rigid ion model has been successfully developed and was used to study the cation exchange in PbSe-CdSe heteronanocrystals [A. O. Yalcin et al., "Atomic resolution monitoring of cation exchange in CdSe-PbSe heteronanocrystals during epitaxial solid-solid-vapor growth," Nano Lett. 14, 3661-3667 (2014)]. In this work, we extend this force field by including another two important binary semiconductors, PbS and CdS, and provide detailed information on the validation of this force field. The parameterization combines Bader charge analysis, empirical fitting, and ab initio energy surface fitting. When compared with experimental data and density functional theory calculations, it is shown that a wide range of physical properties of bulk PbS, PbSe, CdS, CdSe, and their mixed phases can be accurately reproduced using this force field. The choice of functional forms and parameterization strategy is demonstrated to be rational and effective. This transferable force field can be used in various studies on II-VI and IV-VI semiconductor materials consisting of CdS, CdSe, PbS, and PbSe. Here, we demonstrate the applicability of the force field model by molecular dynamics simulations whereby transformations are initiated by cation exchange.

  14. A transferable force field for CdS-CdSe-PbS-PbSe solid systems

    Energy Technology Data Exchange (ETDEWEB)

    Fan, Zhaochuan; Vlugt, Thijs J. H., E-mail: t.j.h.vlugt@tudelft.nl [Process and Energy Department, Delft University of Technology, Leeghwaterstraat 39, 2628 CB Delft,The Netherlands (Netherlands); Koster, Rik S.; Fang, Changming; Huis, Marijn A. van [Debye Institute for Nanomaterials Science and Center for Extreme Matter and Emergent Phenomena, Utrecht University, Princetonplein 5, 3584 CC Utrecht (Netherlands); Wang, Shuaiwei [Institute of Nanostructured Functional Materials, Huanghe Science and Technology College, Zhengzhou, Henan 450006 (China); Yalcin, Anil O.; Tichelaar, Frans D.; Zandbergen, Henny W. [Kavli Institute of Nanoscience, Delft University of Technology, Lorentzweg 1, 2628 CJ Delft (Netherlands)

    2014-12-28

    A transferable force field for the PbSe-CdSe solid system using the partially charged rigid ion model has been successfully developed and was used to study the cation exchange in PbSe-CdSe heteronanocrystals [A. O. Yalcin et al., “Atomic resolution monitoring of cation exchange in CdSe-PbSe heteronanocrystals during epitaxial solid-solid-vapor growth,” Nano Lett. 14, 3661–3667 (2014)]. In this work, we extend this force field by including another two important binary semiconductors, PbS and CdS, and provide detailed information on the validation of this force field. The parameterization combines Bader charge analysis, empirical fitting, and ab initio energy surface fitting. When compared with experimental data and density functional theory calculations, it is shown that a wide range of physical properties of bulk PbS, PbSe, CdS, CdSe, and their mixed phases can be accurately reproduced using this force field. The choice of functional forms and parameterization strategy is demonstrated to be rational and effective. This transferable force field can be used in various studies on II-VI and IV-VI semiconductor materials consisting of CdS, CdSe, PbS, and PbSe. Here, we demonstrate the applicability of the force field model by molecular dynamics simulations whereby transformations are initiated by cation exchange.

  15. 4-CM2 CuInGaSe2 based solar cells

    International Nuclear Information System (INIS)

    Devaney, W.E.; Stewart, J.M.; Chen, W.S.

    1990-01-01

    This paper reports that polycrystalline thin-film solar cells with the structure ZnO/CdZnS/CuInGaSe 2 have been fabricated with larger single cell areas than have been previously reported. A cell of area 4-cm 2 has been made with an Am1.5, 100 mW/cm 2 total area conversion efficiency of (11.1% 912.0% active area) and AMO conversion efficiency of 10.0% (10.9% active area). The CuInGaSe 2 layer had a gallium to indium ratio of 0.26:0.74 with a band gap of approximately 1.15 eV. The cells use an isolated tab design for the negative (grid) contact, demonstrating the ability to pattern the semiconductor layers. Such CuInGaSe 2 based cells may be suitable both for large area terrestrial applications and for single-junction space cell applications

  16. Lattice thermal conductivity of LaSe

    Energy Technology Data Exchange (ETDEWEB)

    Li, Wei, E-mail: tolwwt@163.com [School of Physics and Telecommunication Engineering, South China Normal University, 510006 Guangzhou (China); Pan, Zhong-liang; Chen, Jun-fang; He, Qin-yu [School of Physics and Telecommunication Engineering, South China Normal University, 510006 Guangzhou (China); Wang, Teng [School of Computer, South China Normal University, 510631 Guangzhou (China)

    2015-07-15

    The phonon dispersions and phonon density of states of LaSe are obtained, based on density functional perturbation theory and the norm-conserving pseudo-potential method. An anomaly in calculated phonon dispersion curves is presented and interpreted as a Kohn anomaly. The heat capacity of LaSe is calculated then. For the three-phonon process scattering, the lowest non-harmonic cubic terms of the interatomic potential are considered to obtain single-phonon relaxation rate by applying the Fermi's golden rule. For the boundary scattering, the average phonon relaxation time was obtained. Considering two kinds of phonon scattering mechanisms, we obtain the lattice thermal conductivity of LaSe.

  17. Improved photoluminescence quantum yield and stability of CdSe-TOP, CdSe-ODA-TOPO, CdSe/CdS and CdSe/EP nanocomposites

    Science.gov (United States)

    Wei, Shutian; Zhu, Zhilin; Wang, Zhixiao; Wei, Gugangfen; Wang, Pingjian; Li, Hai; Hua, Zhen; Lin, Zhonghai

    2016-07-01

    Size-controllable monodisperse CdSe nanocrystals with different organic capping were prepared based on the hot-injection method. The effective separation of nucleation and growth was achieved by rapidly mixing two highly reactive precursors. As a contrast, we prepared CdSe/CdS nanocrystals (NCs) successfully based on the selective ion layer adsorption and reaction (SILAR) technique. This inorganic capping obtained higher photoluminescence quantum yield (PLQY) of 59.3% compared with organic capping of 40.8%. Furthermore, the CdSe-epoxy resin (EP) composites were prepared by adopting a flexible ex situ method, and showed excellent stability in the ambient environment for one year. So the composites with both high PLQY of nanocrystals and excellent stability are very promising to device application.

  18. Static structure of superionic conducting glass of Ag-Ge-Se system

    Energy Technology Data Exchange (ETDEWEB)

    Suenaga, R; Nakashima, S; Tahara, S; Takeda, S [Graduate School of Sciences, Kyushu University, 4-2-1 Ropponmatsu, Fukuoka 810-8560 (Japan); Kawakita, Y [Faculty of Sciences, Kyushu University, 4-2-1 Ropponmatsu, Fukuoka 810-8560 (Japan); Kohara, S [Japan Synchrotron Radiation Research Inst., 1-1-1 Kouto, Sayo-cho, Hyogo 679-5198 (Japan)], E-mail: takeda@rc.kyushu-u.ac.jp

    2008-02-15

    Superionic conducting glasses are the important materials as solid electrolytes. Amorphous Ag-Ge-Se system is well known to exhibit the superionic conducting behavior where silver ions easily migrate into the mixed structure of Ag{sub 2}Se and Ge-Se chalcogenide glass. It will be good material to study how the superionic conducting region distributes in the glassy network, and whether the conducting paths extends to the entire of the material, or the localized and limited area in an isolated region. In this paper, we will present the results of the static structure of Ag-Ge-Se system by high-energy X-ray diffraction measurements.

  19. Luminescence spectra of CdSe/ZnSe double layers of quantum dots

    Energy Technology Data Exchange (ETDEWEB)

    Reznitsky, Alexander; Permogorov, Sergei; Korenev, Vladimir V.; Sedova, Irina; Sorokin, Sergey; Sitnikova, Alla; Ivanov, Sergei [A.F. Ioffe Physico-Technical Institute, Polytekhnicheskaya 26, 194021 St. Petersburg (Russian Federation); Klochikhin, Albert [B.P. Konstantinov Nuclear Physics Institute, St. Petersburg (Russian Federation)

    2009-12-15

    We have studied the emission spectra and structural properties of double CdSe/ZnSe quantum dot (QD) sheet structures grown by molecular beam epitaxy in order to elucidate the mechanisms of the electronic and strain field interaction between the QD planes. The thickness of the ZnSe barrier separating the CdSe sheets was in the range of 10-60 monolayers (ML) in the set of samples studied. We have found that coupling between dots in adjacent layers becomes relatively strong in CdSe/ZnSe double layers structures with 25-27 ML barrier, while it is rather weak when the barrier thickness exceeds 30 ML. (copyright 2009 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  20. One-pot synthesis of hollow NiSe-CoSe nanoparticles with improved performance for hybrid supercapacitors

    Science.gov (United States)

    Chen, Haichao; Fan, Meiqiang; Li, Chao; Tian, Guanglei; Lv, Chunju; Chen, Da; Shu, Kangying; Jiang, Jianjun

    2016-10-01

    Hollow NiSe-CoSe samples have been synthesized for the first time via a one-pot solvothermal approach. The strategy is robust enough to synthesize NiSe-CoSe nanoparticles with different NiSe to CoSe ratios but with a similar hollow structure. Co ions in the NiSe-CoSe nanoparticles play decisive role for formation of the hollow structure; otherwise, the nanoparticles become solid for the NiSe sample. When used as the positive electroactive materials for energy storage, the NiSe-CoSe samples show excellent electrochemical activity in alkaline electrolyte. Using the synergistic effect between NiSe and CoSe, the electrochemical performance of NiSe-CoSe can be tuned by varying the NiSe to CoSe ratios. The NiSe-CoSe sample with a NiSe to CoSe ratio of 4:2 shows the best electrochemical performance in terms of superior specific capacity, improved rate capability and excellent cycling stability. In addition, the electrochemical performance of NiSe-CoSe sample with a NiSe to CoSe ratio of 4:2 is also evaluated via assembling hybrid supercapacitors with RGO, and the hybrid supercapacitor delivers both high power and energy densities (41.8 Wh kg-1 at 750 W kg-1 and 20.3 Wh kg-1 at 30 kW kg-1).

  1. Histotopography of the radiopharmaceuticals 75Se-selenomethionine and 75Se-selenite in critical organs of adult and embryonic mice

    International Nuclear Information System (INIS)

    Khant, S.E.; Norets, T.A.

    1981-01-01

    Adult male and pregnant mice received 75 Se-labelled methionine and selenite, resp. The critical organs and the embryos were examined histoautoradiographically at different time intervals as to the organ distribution of the radiopharmaceuticals. All organs revealed a heterogeneity of the 75 Se distribution with an intensity being unequally organo-specific and depending on the type of the radiopharmaceutical. 75 Se-selenomethionine was deposited mainly in functional areas of kidneys, liver, bone marrow and testes thus causing a long-term retention and an intensive irradiation of these organs. In the embryos 75 Se-seleno-methionine was distributed unequally preferring liver, hematopoietic areas of the bone marrow and the lens

  2. Synthesis and properties of new CdSe-AgI-As2Se3 chalcogenide glasses

    International Nuclear Information System (INIS)

    Kassem, M.; Le Coq, D.; Fourmentin, M.; Hindle, F.; Bokova, M.; Cuisset, A.; Masselin, P.; Bychkov, E.

    2011-01-01

    Research highlights: → Determination of the glass-forming region in the pseudo-ternary CdSe-AgI-As 2 Se 3 system. → Characterization of macroscopic properties of the new CdSe-AgI-As 2 Se 3 glasses. → Far infrared transmission of chalcogenide glasses. → Characterization of the total conductivity of CdSe-AgI-As 2 Se 3 glasses. -- Abstract: The glass-forming region in the pseudo-ternary CdSe-AgI-As 2 Se 3 system was determined. Measurements including differential scanning calorimetry (DSC), density, and X-ray diffraction were performed. The effect resulting from the addition of CdSe or AgI has been highlighted by examining three series of different base glasses. The characteristic temperatures of the glass samples, including glass transition (T g ), crystallisation (T x ), and melting (T m ) temperatures are reported and used to calculate their ΔT = T x - T g and their Hruby, H r = (T x - T g )/(T m - T x ), criteria. Evolution of the total electrical conductivity σ and the room temperature conductivity σ 298 was also studied. The terahertz transparency domain in the 50-600 cm -1 region was pointed for different chalcogenide glasses (ChGs) and the potential of the THz spectroscopy was suggested to obtain structural information on ChGs.

  3. No todo lo que cuenta se cuenta

    NARCIS (Netherlands)

    van Rijckevorsel, J.

    2008-01-01

    En este trabajo publicado en "Insurance Economics" Nº 58 (Julio 2008), Jan van Rijckevorsel hace un profundo análisis del uso práctico de las estadísticas de seguros aplicadas a aspectos reales del quehacer institucional del sector, y señala varios campos (como el valor y calificación de la

  4. Properties and Bibliography of GaSe

    Science.gov (United States)

    1994-02-01

    Musaev, A. E. Bakhyshev, N. M. Gasanly and L. G. Musaeva . (1975). "Anisotropy of the optical constants of GaS and GaSe near the absorption edge." Sov...Phys. Semiconductors. 9 94-95 Russian ref.: Fiz. Tekh. Poluprovodn. 9 142-145 (January 1975). Akhundov, G. A., L. G. Musaeva and M. D. Khomutova

  5. VerSeDa: vertebrate secretome database.

    Science.gov (United States)

    Cortazar, Ana R; Oguiza, José A; Aransay, Ana M; Lavín, José L

    2017-01-01

    Based on the current tools, de novo secretome (full set of proteins secreted by an organism) prediction is a time consuming bioinformatic task that requires a multifactorial analysis in order to obtain reliable in silico predictions. Hence, to accelerate this process and offer researchers a reliable repository where secretome information can be obtained for vertebrates and model organisms, we have developed VerSeDa (Vertebrate Secretome Database). This freely available database stores information about proteins that are predicted to be secreted through the classical and non-classical mechanisms, for the wide range of vertebrate species deposited at the NCBI, UCSC and ENSEMBL sites. To our knowledge, VerSeDa is the only state-of-the-art database designed to store secretome data from multiple vertebrate genomes, thus, saving an important amount of time spent in the prediction of protein features that can be retrieved from this repository directly. VerSeDa is freely available at http://genomics.cicbiogune.es/VerSeDa/index.php. © The Author(s) 2017. Published by Oxford University Press.

  6. Det faderløse samfund

    DEFF Research Database (Denmark)

    Jensen, Henrik

    Det faderløse samfund er en kulturhistorisk afdækning af fader- og autoritetstabet i det 20. århundredes Europa, med fokus på fader-søn-forholdet og fortalt gennem skikkelser som Max Weber, Freud, Jung, Kafka - og ’den uregerlige søn’ over dem alle, psykologen og anarkisten Otto Gross. Den er...

  7. Señales en el agua

    Directory of Open Access Journals (Sweden)

    Helcías Martan Góngora

    1964-11-01

    Full Text Available La lluvia fue siempre compañera de la soledad. En su ámbito de música se mueve el pensamiento con monótono ritmo y el alma encuentra su centro de gravedad, mientras dura el imperio de su amada caricia.

  8. Femtosecond Laser-Induced Formation of Wurtzite Phase ZnSe Nanoparticles in Air

    Directory of Open Access Journals (Sweden)

    Hsuan I Wang

    2012-01-01

    Full Text Available We demonstrate an effective method to prepare wurtzite phase ZnSe nanoparticles from zincblende ZnSe single crystal using femtosecond pulse laser ablation. The fabricated ZnSe nanoparticles are in spherical shape and uncontaminated while synthesized under ambient environment. By controlling the laser fluences, the average size of ZnSe nanoparticles can be varied from ~16 nm to ~22 nm in diameter. In Raman spectra, the surface phonon mode becomes dominant in the smaller average particle size with uniform size distribution. The interesting phase transition from the zinc blende structure of ZnSe single crystal to wurtzite structure of ZnSe nanoparticles may have been induced by the ultrahigh ablation pressure at the local area due to the sudden injection of high energy leading to solid-solid transition.

  9. Flexible, High-Speed CdSe Nanocrystal Integrated Circuits.

    Science.gov (United States)

    Stinner, F Scott; Lai, Yuming; Straus, Daniel B; Diroll, Benjamin T; Kim, David K; Murray, Christopher B; Kagan, Cherie R

    2015-10-14

    We report large-area, flexible, high-speed analog and digital colloidal CdSe nanocrystal integrated circuits operating at low voltages. Using photolithography and a newly developed process to fabricate vertical interconnect access holes, we scale down device dimensions, reducing parasitic capacitances and increasing the frequency of circuit operation, and scale up device fabrication over 4 in. flexible substrates. We demonstrate amplifiers with ∼7 kHz bandwidth, ring oscillators with <10 μs stage delays, and NAND and NOR logic gates.

  10. Absorption Spectra of CuGaSe2 and CuInSe2 Semiconducting Nanoclusters

    KAUST Repository

    Mokkath, Junais Habeeb; Singh, Nirpendra; Schwingenschlö gl, Udo

    2015-01-01

    The structural and optical properties of the chalcopyrite CunGanSe2n and CunInnSe2n nanoclusters (n = 2, 4, 6, and 8) are investigated as a function of the size using a combination of basin-hopping global optimization and time-dependent density

  11. Theoretical and experimental studies of the ZnSe/CuInSe2 heterojunction band offset

    International Nuclear Information System (INIS)

    Nelson, A.J.; Schwerdtfeger, C.R.; Wei, S.; Zunger, A.; Rioux, D.; Patel, R.; Hoechst, H.

    1993-01-01

    We report first-principles band structure calculations that show that ZnSe/CuInSe 2 has a significant valence band offset (VBO, ΔE v ): 0.70±0.05 eV for the relaxed interface and 0.60±0.05 eV for the coherent interface. These large values demonstrate the failure of the common anion rule. This is traced to a stronger Cu,d-Se,p level repulsion in CuInSe 2 than the Zn,d-Se,p repulsion in ZnSe. The VBO was then studied by synchrotron radiation soft x-ray photoemission spectroscopy. ZnSe overlayers were sequentially grown in steps on n-type CuInSe 2 (112) single crystals at 200 degree C. In situ photoemission measurements were acquired after each growth in order to observe changes in the valence band electronic structure as well as changes in the In 4d and Zn 3d core lines. Results of these measurements reveal that the VBO is ΔE v =0.70±0.15 eV, in good agreement with the first-principles prediction

  12. Que se vea lo que se oye: a vueltas con los fonemas y las letras

    Directory of Open Access Journals (Sweden)

    Gómez del Estal Villarino, Mario

    2011-03-01

    Full Text Available Partiendo de lo que el refrán “La letra con sangre entra” viene a decir a quien se deje escucharlo, se abre una descripción de las diferencias radicales que se dan entre aprender a hablar y aprender a escribir. La relación entre ambas actividades no se puede entender sin analizar la tan extendida perversión que supone hablar lo que se escribe en vez de escribir lo que se habla. A continuación, se detallan algunos de los síntomas más frecuentes de dicha perversión, caracterizados todos por la intromisión de la conciencia en terrenos donde lo único que hace es estorbar, en especial la pronunciación pedantesca de ciertos finales silábicos o de palabra, como en traNSporte, aBStraKción, óPtico, oBjeto, fúTbol, libertaD, diGno o fraK, así como las distintas deformaciones que sufren las palabras que la ortografía académica prescribe que se escriban con la letra equis.

  13. Exciton dephasing and biexciton binding in CdSe/ZnSe islands

    DEFF Research Database (Denmark)

    Wagner, Hans Peter; Tranitz, H.-P.; Preis, H

    1999-01-01

    The dephasing of excitons and the formation of biexcitons in self-organized CdSe/ZnSe islands grown by molecular-beam epitaxy is investigated using spectrally resolved four-wave mixing. A distribution of exciton-exciton scattering efficiencies and dephasing times in the range of 0.5-10 ps...

  14. Anisotropy in CdSe quantum rods

    Energy Technology Data Exchange (ETDEWEB)

    Li, Liang-shi [Univ. of California, Berkeley, CA (United States)

    2003-01-01

    The size-dependent optical and electronic properties of semiconductor nanocrystals have drawn much attention in the past decade, and have been very well understood for spherical ones. The advent of the synthetic methods to make rod-like CdSe nanocrystals with wurtzite structure has offered us a new opportunity to study their properties as functions of their shape. This dissertation includes three main parts: synthesis of CdSe nanorods with tightly controlled widths and lengths, their optical and dielectric properties, and their large-scale assembly, all of which are either directly or indirectly caused by the uniaxial crystallographic structure of wurtzite CdSe. The hexagonal wurtzite structure is believed to be the primary reason for the growth of CdSe nanorods. It represents itself in the kinetic stabilization of the rod-like particles over the spherical ones in the presence of phosphonic acids. By varying the composition of the surfactant mixture used for synthesis we have achieved tight control of the widths and lengths of the nanorods. The synthesis of monodisperse CdSe nanorods enables us to systematically study their size-dependent properties. For example, room temperature single particle fluorescence spectroscopy has shown that nanorods emit linearly polarized photoluminescence. Theoretical calculations have shown that it is due to the crossing between the two highest occupied electronic levels with increasing aspect ratio. We also measured the permanent electric dipole moment of the nanorods with transient electric birefringence technique. Experimental results on nanorods with different sizes show that the dipole moment is linear to the particle volume, indicating that it originates from the non-centrosymmetric hexagonal lattice. The elongation of the nanocrystals also results in the anisotropic inter-particle interaction. One of the consequences is the formation of liquid crystalline phases when the nanorods are dispersed in solvent to a high enough

  15. Selenomethionine Se 75 thymus scans in myasthenia gravis

    Energy Technology Data Exchange (ETDEWEB)

    Toole, J.F.; Cowan, R.; Maynard, D.; Witcofski, R.L.; Janeway, R.

    1975-01-01

    In 1966, Toole and Witcofski introduced selenomethionine Se 75 mediastinal scanning as a diagnostic test for thymomas. Since then we have performed such scans on patients with myasthenic syndrome. Because the technique is atraumatic, safe, and accurate, it can be performed on critically ill myasthenics. Two hundred and fifty microcuries of selenomethionine Se 75 is injected intravenously. Within 1 hour the mediastinum from the suprasternal notch to the ziphoid process is scanned, using a 2 x 3 inch scanner. Delayed scans have been made in a few instances but they have not increased the number of positive cases. Selenomethionine Se 75 is incorporated into tissues undergoing rapid protein synthesis such as thyroid, pancreas, liver, and lymphomas. Of the 34 mediastinal scans performed on myasthenics between 1966 and December 31, 1974, 4 were positive for thymoma. In addition, there was a positive scan with uptake in an area of atelectasis of the lung adjacent to the mediastinum. Of interest is the fact that 1 patient with carcinoma of the lung had a positive scan over the lesion. In 13 patients with chronic lymphatic leukemia the mediastinal scans were negative. In another patient with a mediastinal mass noted on chest x-ray, a variety of differential diagnostic possibilities were considered, such as pericardial cyst, dermoid, and aneurysm. A selenomethionine scan was strongly positive, suggesting a thymoma which subsequent surgery confirmed.

  16. Explaining the Principle of Mala in Se

    DEFF Research Database (Denmark)

    Dige, Morten

    2012-01-01

    Certain methods and weapons are traditionally considered to be "mala in se", i.e. evil in themselves. Examples are mass rape campaigns and land mines. The article examines different interpretations of the principle that belligerents ought not to use such means. Some interpretations are reductionist...... in the sense that they see the principle as an instance of other principles regulating conduct in war (jus in bello), namely the principles of discrimination and proportionality. I suggest a horizontal and a vertical dimension of the latter. Resort to violence can then be unjustified if 1) the persons......-one should have to endure. I defend the vertical dimension of proportionality as a key to understanding the principle of mala in se and consider whether it leads to an absolute prohibition against such means...

  17. Magnetothermoelectric properties of Bi2Se3

    Science.gov (United States)

    Fauqué, Benoît; Butch, Nicholas P.; Syers, Paul; Paglione, Johnpierre; Wiedmann, Steffen; Collaudin, Aurélie; Grena, Benjamin; Zeitler, Uli; Behnia, Kamran

    2013-01-01

    We present a study of entropy transport in Bi2Se3 at low temperatures and high magnetic fields. In the zero-temperature limit, the magnitude of the Seebeck coefficient quantitatively tracks the Fermi temperature of the three-dimensional Fermi surface at the Γ point as the carrier concentration changes by two orders of magnitude (1017 to 1019 cm-3). In high magnetic fields, the Nernst response displays giant quantum oscillations indicating that this feature is not exclusive to compensated semimetals. A comprehensive analysis of the Landau level spectrum firmly establishes a large g factor in this material and a substantial decrease of the Fermi energy with increasing magnetic field across the quantum limit. Thus, the presence of bulk carriers significantly affects the spectrum of the intensively debated surface states in Bi2Se3 and related materials.

  18. Properties of the CuGaSe2 and CuInSe2 (001) surface

    International Nuclear Information System (INIS)

    Deniozou, T.

    2005-01-01

    The main task of this work was to investigate the (001) CuGaSe 2 and CuInSe 2 surface in dependence of preparation and stoichiometry. The knowledge of the atomic structure as well as other surface properties is important in respect to optimization of novel thin film solar cells. For the characterization of the layers mainly Auger electron Spectroscopy, low-energy electron diffraction and photoelectron spectroscopy were implemented. The development of an appropriate procedure with Ar + sputtering and annealing combined with decapping enabled the preparation of clean and well-ordered surfaces. Different surface structures were observed in dependence of the layer preparation and composition. A (4 x 1) reconstruction was observed for the first time on CuGaSe 2 layers grown with a moderate Cu-excess after preparation by sputtering and annealing. Similarly a (4 x 2) reconstruction was detected on CuInSe2 surfaces of Cu-poor layers. A reconstruction could be also observed on Cu-poorer layers, however the facets/steps could not be completely removed. Cu-richer layers were facet-free, however the observed reconstruction was also weaker. Thus it was shown that in contrary to recent expectations, according to which only the (112) surface is stable, also the (001) can be stable under particular conditions. The appearance of facets or steps is correlated with the presence of CuIn 3 Se 5 or CuGa 3 Se 5 phases. This information is furthermore important for the understanding of grain boundaries in polycrystalline CuGaSe 2 and CuInSe 2 . Binding energy shifts were observed for the first time on all Se3d, In4d, Ga3d, Cu3d core levels of the reconstructed surfaces. By comparison with results from the literature from the similar ZnSe (100) surface a modell for the (4 x 2) reconstruction was proposed. The surface components in the Se3d, In4d and Cu3d emission were attributed to Se dimers or In and Cu adatoms respectively. The x 1 periodicity of the (4 x 1) reconstruction of CuGaSe 2 is

  19. Synthèse et spectroscopie IR:

    African Journals Online (AJOL)

    BUREAU

    Synthèse de HCs5P2W18O62.16H2O et application à l'adsorption de la matière ... Résumé. La présente étude porte sur l'adsorption d'un colorant, le bleu de méthylène (BM), par un hétéropolyanion saturé ..... Adsorption of a gas mixture on ...

  20. Double beta decay of 82Se

    International Nuclear Information System (INIS)

    Elliott, S.R.; Hahn, A.A.; Moe, M.K.; Nelson, M.A.; Vient, M.A.

    1992-01-01

    The two-neutrino double beta decay of 82 Se has been measured during a 20 244 h run resulting in a half-life of 1.08 -0.06 +0.26 x10 20 years (68% C.L.). No candidate events for the zero-neutrino double beta decay during 21 924 h results in a half-life limit of 2.7x10 22 years at the 68% confidence level

  1. Thermoelectric properties of SnSe compound

    Energy Technology Data Exchange (ETDEWEB)

    Guan, Xinhong [State Key Laboratory of Information Photonics and Optical Communications, Ministry of Education, Beijing University of Posts and Telecommunications, P.O. Box 72, Beijing 100876 (China); Lu, Pengfei, E-mail: photon@bupt.edu.cn [State Key Laboratory of Information Photonics and Optical Communications, Ministry of Education, Beijing University of Posts and Telecommunications, P.O. Box 72, Beijing 100876 (China); Wu, Liyuan; Han, Lihong [State Key Laboratory of Information Photonics and Optical Communications, Ministry of Education, Beijing University of Posts and Telecommunications, P.O. Box 72, Beijing 100876 (China); Liu, Gang [School of Electronic Engineering, Beijing University of Posts and Telecommunications, Beijing 100876 (China); Song, Yuxin [State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050 (China); Wang, Shumin [State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200050 (China); Photonics Laboratory, Department of Microtechnology and Nanoscience, Chalmers University of Technology, 41296 Gothenburg (Sweden)

    2015-09-15

    Highlights: • The electronic and thermoelectric properties of SnSe bulk material are studied. • The ZT can reach as high as 1.87 along yy and 1.6 along zz direction at 800k. • SnSe is an indirect-band material, and SOC has little effect on the band structure. • The high ZT can be attributed to the intrinsically ultralow thermal conductivity. - Abstract: A first-principles study and Boltzmann transport theory have been performed to evaluate the electronic structure and thermoelectric properties of SnSe compound. The energy band structure and density of states are studied in detail. The electronic transport coefficients are then calculated as a function of chemical potential or temperature within the assumption of the constant relaxation time. The figure of merit ZT is obtained with the use of calculated thermoelectric properties and can reach as high as 1.87 along yy and 1.6 along zz direction at 800 K. Our theoretical result agrees well with previous experimental data.

  2. Experience with the SE in Germany

    Directory of Open Access Journals (Sweden)

    Jochem Reichert

    2008-03-01

    Full Text Available A rather significant proportion of the Societas Europaeas (the European Company, or SE formed to date have had German roots. German corporate law has been enriched by an interesting alternative which meanwhile seems to have gained momentum. This contribution focuses on SEs incorporated by German entrepreneurs and provides an interesting account concerning the use of SEs in Germany in practice, such as Allianz, Fresenius, BASF and Porsche. Has the SE been used to circumvent rigid company law provisions or is it a more flexible and effective tool, perhaps, for company mobility? The practical motives behind setting up this company form are also reflected upon. These include: the facilitation of cross-border mergers; transfer of the registered office; the ‘European’ image; a more flexible form of co-determination in large companies (reduction of the number of supervisory board members; avoidance and freezing of co-determination for medium-sized enterprises; the appeal of the one-tier system and its endangerment by German co-determination; and flat and uniform structures for company groups. The author also briefly discusses some of the problems arising from the formation of SEs in Germany. He ultimately concludes that practice has shown that it is possible to work with the legal regime of the SE in Germany, which adds a new company form to those available in that Member State.

  3. Thermoelectric properties of SnSe compound

    International Nuclear Information System (INIS)

    Guan, Xinhong; Lu, Pengfei; Wu, Liyuan; Han, Lihong; Liu, Gang; Song, Yuxin; Wang, Shumin

    2015-01-01

    Highlights: • The electronic and thermoelectric properties of SnSe bulk material are studied. • The ZT can reach as high as 1.87 along yy and 1.6 along zz direction at 800k. • SnSe is an indirect-band material, and SOC has little effect on the band structure. • The high ZT can be attributed to the intrinsically ultralow thermal conductivity. - Abstract: A first-principles study and Boltzmann transport theory have been performed to evaluate the electronic structure and thermoelectric properties of SnSe compound. The energy band structure and density of states are studied in detail. The electronic transport coefficients are then calculated as a function of chemical potential or temperature within the assumption of the constant relaxation time. The figure of merit ZT is obtained with the use of calculated thermoelectric properties and can reach as high as 1.87 along yy and 1.6 along zz direction at 800 K. Our theoretical result agrees well with previous experimental data

  4. Forming Glasses from Se and Te

    Directory of Open Access Journals (Sweden)

    Pierre Lucas

    2009-10-01

    Full Text Available Despite being close neighbors on the Periodic Table, selenium and tellurium present a totally different abilities to form glasses. Se is a very good glass former, and gives rise to numerous glass compositions which are popular for their transparency in the infrared range and their stability against crystallization. These glasses can be shaped into sophisticated optical devices such as optical fibers, planar guides or lenses. Nevertheless, their transparencies are limited at about 12 μm (depending on the thickness of the optical systems due to the relatively small mass of the Se element. On the other hand, tellurium is heavier and its use in substitution for Se permits to shift the IR cutoff beyond 20 μm. However, the semimetallic nature of Te limits its glass formation ability and this glass family is known to be unstable and consequently has found application as phase change material in the Digital Versatile Disk (DVD technology. In this paper, after a review of selenide glasses and their applications, it will be shown how, in a recent past, it has been possible to stabilize tellurium glasses by introducing new elements like Ga or I in their compositions.

  5. Qué se sabe de bullying

    Directory of Open Access Journals (Sweden)

    B. Ricardo Musalem, Ps.

    2015-01-01

    Full Text Available Se define bullying como una dinámica de maltrato sistemática que ocurre entre iguales de manera persistente. Es considerado un problema de salud pública debido a su prevalencia y las consecuencias que tiene en todos sus participantes: en los agresores, en las víctimas, en los espectadores, en los padres y familias, en la comunidad escolar y en la sociedad en general. Las investigaciones muestran efectos a corto, mediano y largo plazo en el desarrollo emocional y social de niños y adolescentes. Se ha constatado una relación del acoso escolar con las patologías físicas, psicosomática y de salud mental en niños, adolescentes y en la vida adulta. En este artículo se describen las características individuales, las relacionales, los factores conocidos como de riesgo y factores protectores, la prevalencia y los programas de abordaje integral del fenómeno. Son múltiples los estudios que muestran la efectividad de la aplicación de estos programas de intervención, diseñados en función de los conocimientos acumulados.

  6. Patrimonio cultural: lo intangible se hace tangible

    Directory of Open Access Journals (Sweden)

    William Heredia Orjuela

    2004-11-01

    Full Text Available Se presentan tres reflexiones a manera de ensayo, elaboradas por estudiantes de vii semestre de la Facultad de Administración de Empresas Turísticas y Hoteleras. El tema central que engloba los escritos es el de la responsabilidad frente al patrimonio cultural, su valoración y su relación con el turismo. En el ensayo La protección del patrimonio cultural como reflejo del ser humano, la estudiante cecilia hinosTrosa hace un llamado de atención frente al problema del tráfico ilícito de bienes que conlleva la pérdida de testimonios de la cultura humana. El escrito de la estudiante mariel cecilia hernández destaca las bondades de recuperar las tradiciones y de cómo éstas se pueden difundir a través del turismo. Por último, el estudiante William heredia hace una reflexión sobre la tangibilidad de lo intangible, en el ensayo Patrimonio Cultural: lo tangible se hace intangible, donde destaca la declaratoria del Carnaval de Barranquilla como patrimonio oral e intangible de la humanidad.

  7. Thermally stimulated properties in ZnSe:Tb and ZnSe:(Mn, Tb) phosphors

    Science.gov (United States)

    Mishra, A. K.; Mishra, S. K.; Pandey, S. P.; Lakshmi Mishra, Kshama

    2018-02-01

    Thermoluminescence studies were performed of ZnSe:Tb and ZnSe:(Mn, Tb) phosphors. A method of preparation for ZnSe phosphors doped with Tb and (Mn, Tb) has been discussed. The thermoluminescence (TL) properties of these phosphors have been studied from 100 to 370 K temperature after exciting by UV radiation (365 nm) at three uniform heating rates 0.4, 0.6 and 0.9 K/s. The trapping parameters like trap depth, lifetime of electrons and capture cross-section have also been determined using various methods.

  8. Absorption Spectra of CuGaSe2 and CuInSe2 Semiconducting Nanoclusters

    KAUST Repository

    Mokkath, Junais Habeeb

    2015-10-01

    The structural and optical properties of the chalcopyrite CunGanSe2n and CunInnSe2n nanoclusters (n = 2, 4, 6, and 8) are investigated as a function of the size using a combination of basin-hopping global optimization and time-dependent density functional theory. Although the lowest energy structures are found to show almost random geometries, the band gaps and absorption spectra still are subject to systematic blue shifts for decreasing cluster size in the case of CunGanSe2n, indicating strong electron confinement. The applicability of the nanoclusters in photovoltaics is discussed. © 2015 American Chemical Society.

  9. Controllable size reduction of CdSe nanowires through the intermediate formation of Se-coated CdSe nanowires using acid and thermal treatment

    Energy Technology Data Exchange (ETDEWEB)

    Lam, N S [Department of Physics, Chinese University of Hong Kong, Hong Kong (China); Wong, K W [Department of Physics, Chinese University of Hong Kong, Hong Kong (China); Li, Q [Department of Physics, Chinese University of Hong Kong, Hong Kong (China); Zheng, Z [Department of Physics, Chinese University of Hong Kong, Hong Kong (China); Lau, W M [Surface Science Western, University of Western Ontario, London, ON, N6A 5B7 (Canada)

    2007-10-17

    Thinning of CdSe nanowires (NWs) with controllable size was achieved by a simple acid treatment and subsequent annealing on thick CdSe NWs synthesized from vapour phase growth. During acid treatment, not only the undesired impurities such as native oxides of Cd and Se could be etched, but surface reactions of CdSe NWs were also observed, resulting in the formation of a layer of elemental Se around a thinner CdSe core. As a result, a heterostructure of Se - CdSe nanostructure formed after acid treatment of CdSe NWs. Upon thermal annealing, the Se shell was effectively removed and thinned stoichiometric single-crystalline CdSe NWs could be obtained. It was observed that NWs could be thinned by up to {approx}60% in diameter by acid treatment and subsequent Se thermal desorption. The degree of thinning was controllable by adjusting the duration of acid treatment. The success of the thinning of CdSe NWs by simple acid treatment and the annealing process reported here opens a new processing route for obtaining stoichiometric CdSe NWs with controllable size reduction and improved aspect ratio. This can undoubtedly broadly improve the range of applications of 1D CdSe nanostructures and allow more exploration of their uni-directional properties. A correction was made to the last paragraph of section 3 on 18 September 2007. The corrected electronic version is identical to the print version.

  10. Controllable size reduction of CdSe nanowires through the intermediate formation of Se-coated CdSe nanowires using acid and thermal treatment

    International Nuclear Information System (INIS)

    Lam, N S; Wong, K W; Li, Q; Zheng, Z; Lau, W M

    2007-01-01

    Thinning of CdSe nanowires (NWs) with controllable size was achieved by a simple acid treatment and subsequent annealing on thick CdSe NWs synthesized from vapour phase growth. During acid treatment, not only the undesired impurities such as native oxides of Cd and Se could be etched, but surface reactions of CdSe NWs were also observed, resulting in the formation of a layer of elemental Se around a thinner CdSe core. As a result, a heterostructure of Se - CdSe nanostructure formed after acid treatment of CdSe NWs. Upon thermal annealing, the Se shell was effectively removed and thinned stoichiometric single-crystalline CdSe NWs could be obtained. It was observed that NWs could be thinned by up to ∼60% in diameter by acid treatment and subsequent Se thermal desorption. The degree of thinning was controllable by adjusting the duration of acid treatment. The success of the thinning of CdSe NWs by simple acid treatment and the annealing process reported here opens a new processing route for obtaining stoichiometric CdSe NWs with controllable size reduction and improved aspect ratio. This can undoubtedly broadly improve the range of applications of 1D CdSe nanostructures and allow more exploration of their uni-directional properties. A correction was made to the last paragraph of section 3 on 18 September 2007. The corrected electronic version is identical to the print version

  11. Highly luminescent CdSe/ZnSe core-shell quantum dots of one-pot preparation in octadecene

    NARCIS (Netherlands)

    Zeng, Q.; Kong, X.; Zhang, Y.; Zhang, H.

    2008-01-01

    CdSe/ZnSe core-shell quantum dots were synthesized using a new one-pot procedure where the core was prepared in octadecene. A ZnSe shell around a CdSe nanoparticle was formed by the reaction of selenium-richness on the surfaces of CdSe nanoparticles with Zn2+ from the injected zinc stearate

  12. Stable and metastable phases in reciprocal systems PbSe + Ag2I2 Ag2Se + PbI2 and PbSe + CdI2 = CdSe + PbI2

    International Nuclear Information System (INIS)

    Odin, I.N.; Grin'ko, V.V.; Kozlovskij, V.F.; Safronov, E.V.

    2005-01-01

    Mutual system PbSe + Ag 2 I 2 = Ag 2 Se + PbI 2 is investigated. It is shown that diagonal Ag 2 Se-PbI 2 is stable. Liquidus surface and isothermal section at 633 K of phase diagram of PbSe-Ag 2 Se-PbI 2 system are built. Transformations directing to crystallization metastable ternary compound forming in PbSe-PbI 2 system and metastable polytype modifications of lead iodide in PbSe-Ag 2 Se-PbI 2 system at 620-685 K are studied. By hardening from molten state (1150-1220 K) new interstitial metastable phases crystallizing in CdCl 2 structural type are obtained in PbSe-Ag 2 Se-PbI 2 and PbSe + CdI 2 = CdSe + PbI 2 systems [ru

  13. Anchorage Areas

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — An anchorage area is a place where boats and ships can safely drop anchor. These areas are created in navigable waterways when ships and vessels require them for...

  14. Thermal analysis of chalcogenide glasses of the system (As/sub/2Se/sub/3)/sub/(1-x):(Tl/sub/2Se)/sub/x

    International Nuclear Information System (INIS)

    Majid, C.A.

    1987-01-01

    In this paper differential thermal analysis (DTA) measurements of chalcogenide glasses of the system (As/sub/2Se/sub/3)/sub/(1-x): (Tl/sub/2Se)/sub/x, with x=0, 0.125, 0.25 and 0.50 are reported. The glass-forming tendencies of these materials have been calculated. The glass-forming tendency of As/sub/2Se/sub/3 has been found to be the highest among the member glasses of this family of chalcogenides. It was found that the glass-forming tendency of As/sub/2Se/sub/3 decreasing gradually at the Tl/sub/2/Se concentration increases. Tl/sub/2Se additions lower the glass transition temperature T/sub/q and the area under the endothermic peak for glass transition temperature, suggesting a tendency for relatively weaker bonding and hence less stability of Tl-rich glass compositions. These studies show that Tl/sub/2Se concentrations result in glasses with progressively higher crystallization tendencies. (author)

  15. Symmetry effects in neutron scattering from isotopically enriched Se isotopes

    Energy Technology Data Exchange (ETDEWEB)

    Lachkar, J.; Haouat, G.; McEllistrem, M. T.; Patin, Y.; Sigaud, J.; Cocu, F.

    1975-06-01

    Differential cross sections for neutron elastic and inelastic scattering from {sup 76}Se, {sup 78}Se, {sup 80}Se and {sup 82}Se, have been measured at 8-MeV incident neutron energy and from {sup 76}Se and {sup 82}Se at 6- and 10-MeV incident energies. The differences observed in the elastic scattering cross sections are interpretable as the effects of isospin term in the scattering potentials. A full analysis of the elastic scattering data are presented.

  16. EXAFS cumulants of CdSe

    International Nuclear Information System (INIS)

    Diop, D.

    1997-04-01

    EXAFS functions had been extracted from measurements on the K edge of Se at different temperatures between 20 and 300 K. The analysis of the EXAFS of the filtered first two shells has been done in the wavevector range laying between 2 and 15.5 A -1 in terms of the cumulants of the effective distribution of distances. The cumulants C 3 and C 4 obtained from the phase difference and the amplitude ratio methods have shown the anharmonicity in the vibrations of atoms around their equilibrium position. (author). 13 refs, 3 figs

  17. Thermoelectric power in n-InSe

    International Nuclear Information System (INIS)

    Casanovas, A.; Cantarero, A.; Segura, A.

    1985-01-01

    Thermoelectric power of InSe samples doped with tin has been measured as functions of the doping concentration in the range of 0.01 to 10% Sn and of the temperature in the range of 50 to 550 K. In the low temperature range the results obtained are coherent with the two-dimensional behaviour of electrons proposed by other authors. About 100 K the results can be explained successfully by introducing the same scattering mechanisms used to interpret the temperature dependence of the electron mobility

  18. Colloidal CdSe Quantum Rings.

    Science.gov (United States)

    Fedin, Igor; Talapin, Dmitri V

    2016-08-10

    Semiconductor quantum rings are of great fundamental interest because their non-trivial topology creates novel physical properties. At the same time, toroidal topology is difficult to achieve for colloidal nanocrystals and epitaxially grown semiconductor nanostructures. In this work, we introduce the synthesis of luminescent colloidal CdSe nanorings and nanostructures with double and triple toroidal topology. The nanorings form during controlled etching and rearrangement of two-dimensional nanoplatelets. We discuss a possible mechanism of the transformation of nanoplatelets into nanorings and potential utility of colloidal nanorings for magneto-optical (e.g., Aharonov-Bohm effect) and other applications.

  19. Mesoscopic NbSe3 wires

    International Nuclear Information System (INIS)

    Zant, H.S.J. van der; Kalwij, A.; Mantel, O.C.; Markovic, N.

    1999-01-01

    We have fabricated wire structures with (sub)micron sizes in the charge-density wave conductor NbSe 3 . Electrical transport measurements include complete mode-locking on Shapiro steps and show that the patterning has not affected the CDW material. Our mesoscopic wires show strong fluctuation and hysteresis effects in the low-temperature current-voltage characteristics, as well as a strong reduction of the phase-slip voltage. This reduction can not be explained with existing models. We suggest that single phase-slip events are responsible for a substantial reduction of the CDW strain in micron-sized systems. (orig.)

  20. Microstructure and thermoelectric properties of CuInSe2/In2Se3 compound

    Science.gov (United States)

    Wang, Kang; Feng, Jing; Ge, Zhen-Hua; Qin, Peng; Yu, Jie

    2018-01-01

    CuInSe2 powders were synthesized by solvothermal method, and then the CuInSe2/In2Se3 bulk samples were fabricated by spark plasma sintering (SPS) technique. To investigate the phase composition, the powders were determined by X-ray diffraction (XRD). The microstructures of the powders and bulk samples were observed by scanning electron microscopy (SEM). The transportation of the electronic properties and thermal conductivity were measured at room temperature to 700 K. According to the results, the CuInSe2 powders appeared in flower-like patterns which ranged from 3 μm to 6 μm. CuInSe2 powders were synthesized at 180∘C with a chalcopyrite structure. The Seebeck coefficient increased significantly in composite thermoelectric materials up to 200μVṡK-1 at 623 K. The thermal conductivity of the sample significantly decreases from the room temperature to 700 K. The CuInSe2 bulk composite by solvothermal method achieves the highest ZT value of 0.187 at 700 K.

  1. Biogeochemical and hydrological controls in mobilizing Se in a saline wetland environment

    Science.gov (United States)

    Datta, S.; Hettiarachchi, G. M.; Crawford, M.; Karna, R.; Allmendinger, N. E.; Khatiwada, R.

    2010-12-01

    Selenium (Se) contamination in watersheds remains a challenge to water and land and wildlife managers throughout the west and mid west of US. In that sense, understanding the fundamentals of Se mobilization, fixation and bioconcentration is the current research endeavor. The challenge for Se research is developing watershed-geochemical models that are well founded in Se geochemical/biologcial principles that can be applied in a wide range of situations to inform decisions. Pariette Wetlands, a 9000 acre Bureau of Land Management controlled wetland system composed of 20 ponds located at the confluence of Pariette Draw and the Green River is the present location of this study. The agricultural and irrigation practices and the water-rock interactions leading to salinization can be associated with changes in Se chemistry in the rivers. Since its inception Pariette Wetlands has been home to a rich and diverse wetland ecosystem located in the arid Uintah Basin of Northeastern Utah. Detailed sampling of surficial sediments (0-1 m) from stream banks, channel beds and for water sampling have been undergone in 2 separate field trips throughout the entire reach of the wetland. To establish Pariette Draw’s contribution of Se to the Green river, water and sediments were also sampled from the Green River up and downstream of its confluence with Pariette Draw. In situ measurements of water parameters within the wetland suggest a clear trend of increased pH from upstream, 8, to downstream, 9.2 and combined with TDS suggest a pH controlled saline environment system. The headwaters near Flood Control Dam have an added input of Se from a possible irrigation source upstream in Pleasant Valley area while Se drastically decreases downstream towards the Red Head Pond. Se fractionation in sediments is being analyzed via a sequential extraction procedure to locate the labile fractions of mostly inorganic bound Se. Solid state speciation of Se via μ-XRF aided μ-XANES is being combined

  2. Phase transitions in thin films of Sn-Sb-Se system

    International Nuclear Information System (INIS)

    Samsudi Sakrani; Abdalla Belal Adam; Yussof Wahab

    1998-01-01

    The preparation and formation of covalent ternary Sn-Sb-Se system were investigated. A solid state reaction technique was employed whereby the evaporated multilayers of Sn/Se/Sb/Sn reacted chemically at a fixed temperature of 240 o C and were allowed to a room temperature slow-cooling. X-ray diffraction analysis showed that phase changes occurred in the system, with indication of amorphization for the predicted Sn 9 .3Sb 8 .1Se 4 4.9 and Sn 1 3.2Sb 4 3.4Se 4 3.4 compositions. These enabled the preliminary topological phase transitions of Sn-Sb-Se system according to the Gibb's triangle in which the areas of crystalline-amorphous were located. (Author)

  3. Lo que se debe a las cimentaciones

    Directory of Open Access Journals (Sweden)

    Oroviogoicoechea, Alberto

    1975-05-01

    Full Text Available This article describes: the problems that arise when the foundations has to act on soils with low consistency or when very narrow tolerances have to be met; the origin of the above mentioned problems; the requirements that are not really necessary, with suitable examples; the absolute and relative admissible magnitudes of differential settlements in concrete structures, walls, partitions and metal structures; the tolerances for mechanical installations; recommendations for projects and a table that sums up the proposed tolerances for relative foundations.En el artículo se describen: los problemas que surgen cuando la cimentación ha de actuar sobre terrenos poco consistentes o cuando se quieren cumplir tolerancias muy estrechas; de dónde provienen dichos problemas; las exigencias que no son realmente necesarias, con ejemplos apropiados; las magnitudes absolutas y relativas admisibles de asientos diferenciales, en estructuras de hormigón, muros, tabiques y estructuras metálicas; las tolerancias para instalaciones mecánicas; recomendaciones para proyecto, y una tabla que recoge las tolerancias propuestas para asientos relativos.

  4. Stretched Exponential relaxation in pure Se glass

    Science.gov (United States)

    Dash, S.; Ravindren, S.; Boolchand, P.

    A universal feature of glasses is the stretched exponential relaxation, f (t) = exp[ - t / τ ] β . The model of diffusion of excitations to randomly distributed traps in a glass by Phillips1 yields the stretched exponent β = d[d +2] where d, the effective dimensionality. We have measured the enthalpy of relaxation ΔHnr (tw) at Tg of Se glass in modulated DSC experiments as glasses age at 300K and find β = 0.43(2) for tw in the 0 Se100-x glasses as x increases to 20%, the length of the polymeric Sen chains between the Ge-crosslinks decreases to n = 2. and the striking relaxation effects nearly vanish. J.C. Phillips, Rep.Prog.Phys. 59 , 1133 (1996). Supported by NSF Grant DMR 08-53957.

  5. Escuela para señoritas, Inglaterra

    Directory of Open Access Journals (Sweden)

    Stillman y Eastwlck-Field, Arquitectos

    1963-02-01

    Full Text Available The object was to design part of a new building which had been seriously damaged during the war, so that the old and new parts would blend into a pleasant whole, with a capacity for 600 girls. The new designs avoid the glass box style of school buildings, and glass walls have been adopted only on the ground floor, thus giving an impression of light and airiness to what used to be a partial basement. Classrooms have been designed in a simple manner, and give the impression of conventional rooms. Simple lines and materials have been chosen throughout. Strong contrasts in the external finish have been avoided, and colours provide a relaxing background to the intensive activities of the students. A constructional feature is the use of prefabricated concrete joists and supports. Outer walls consist of brick panels filling in the space between the visible concrete framework. Ceilings are of insulating boards, and the floors are covered with linoleum. Special attention has been devoted to the hall. In this case the roof is of white gypsum, and the only features are the grills covering the fluorescent lighting. The walls of this hall are of glass, and are covered with heavy velvet curtains. A balcony with hardwood posts adds a simple and friendly feature to the building. The furniture and drapery have been carefully chosen. Camden school has a rigid tradition of individualism and fine education, and the new building has succeeded in maintaining the exclusive quality of the older parts, as well as offering an overall impression of up to date construction.El problema consistía en proyectar un nuevo núcleo para un edificio que había sido seriamente bombardeado durante la guerra, de tal modo que las partes antiguas y nuevas formasen un conjunto agradable y con capacidad para más de 600 chicas. En la nueva construcción se ha evitado el carácter de «cajas de cristal» de las nuevas escuelas ordinarias y se han empleado muros de cristal solamente en la

  6. CuInSe2 nano-crystallite reaction kinetics using solid state reaction from Cu2Se and In2Se3 powders

    International Nuclear Information System (INIS)

    Hsiang, Hsing-I; Lu, Li-Hsin; Chang, Yu-Lun; Ray, Dahtong; Yen, Fu-Su

    2011-01-01

    Highlights: → CuInSe 2 phase increased gradually accompanied with a decrease in γ-In 2 Se 3 and no intermediate phase during calcination. → CuInSe 2 formation from Cu 2 Se and In 2 Se 3 powders follows a one-dimensional diffusion-controlled reaction with apparent activation energy of about 122.5 kJ/mol. → The solid reaction kinetics may be dominated by the diffusion of In 3+ ions. - Abstract: The reaction mechanism and CuInSe 2 formation kinetics using a solid state reaction from Cu 2 Se and In 2 Se 3 powders synthesized using a heating up process were investigated using X-ray diffractomy (XRD) and transmission electron microscopy (TEM). It was observed that the CuInSe 2 phase increased gradually, accompanied with a decrease in γ-In 2 Se 3 with no intermediate phase as the calcination temperature and soaking time were increased. The reaction kinetics was analyzed using the Avrami and polynomial kinetic model, suggesting that CuInSe 2 formation from Cu 2 Se and In 2 Se 3 powders follows a diffusion-controlled reaction with an apparent activation energy of about 122.5-182.3 kJ/mol. Cu 2 Se and In 2 Se 3 phases react and directly transform into CIS without the occurrence of any intermediate phase and the size of the newly formed CuInSe 2 crystallites was close to that of the Cu 2 Se reactant particle based on the TEM results, which indicated that the solid reaction kinetics may be dominated by the diffusion of In 3+ ions.

  7. Green synthesis of ZnSe and core–shell ZnSe@ZnS nanocrystals (NCs) using a new, rapid and room temperature photochemical approach

    Energy Technology Data Exchange (ETDEWEB)

    Molaei, M., E-mail: m.molaei@vru.ac.ir; Bahador, A.R.; Karimipour, M.

    2015-10-15

    In this work, ZnSe and core–shell ZnSe@ZnS nanocrystals (NCs) were synthesized using a one-pot, rapid and room temperature photochemical method. UV illumination provided the required energy for the chemical reactions. Synthesized NCs were characterized using X-ray diffraction spectroscopy (XRD), transmission electron microscopy (TEM), UV–vis and photoluminescence (PL) spectroscopy. XRD pattern indicated cubic zinc blende structure for ZnSe NCs and the TEM image indicated round-shaped particles, most of which had a diameter of about 3 nm. Band gap of ZnSe NCs was obtained as about 3.6 eV, which was decreased by increasing the illumination time. Synthesized NCs indicated intensive and narrow emission in the UV-blue area (370 nm) related to the excitonic recombination and a broad band emission with a peak located at about 490 nm originated from the DAP (donor–acceptor pairs) recombination. ZnS shell was grown on ZnSe cores using a reaction based on the photo-sensitivity of Na{sub 2}S{sub 2}O{sub 3}. For ZnSe@ZnS core–shell NCs, XRD diffraction peaks shifted to higher angles. TEM image indicated a shell around cores and most of the ZnSe@ZnS NCs have a diameter of about 5 nm. After the ZnS growth, ZnSe excitonic emission shifted to the longer wavelength and PL intensity was increased considerably. PL QY was obtained about 11% and 17% for ZnSe and ZnSe@ZnS core–shell QDs respectively. - Highlights: • A green photochemical approach was reported for synthesis of ZnSe NCs. • ZnS shell was grown around ZnSe using a new method. • Synthesis method was rapid, simple and at room temperature. • ZnSe NCs indicated a narrow UV-blue and a broad DAP emissions. • PL intensity was increased considerably by ZnS shell growth.

  8. Green synthesis of ZnSe and core–shell ZnSe@ZnS nanocrystals (NCs) using a new, rapid and room temperature photochemical approach

    International Nuclear Information System (INIS)

    Molaei, M.; Bahador, A.R.; Karimipour, M.

    2015-01-01

    In this work, ZnSe and core–shell ZnSe@ZnS nanocrystals (NCs) were synthesized using a one-pot, rapid and room temperature photochemical method. UV illumination provided the required energy for the chemical reactions. Synthesized NCs were characterized using X-ray diffraction spectroscopy (XRD), transmission electron microscopy (TEM), UV–vis and photoluminescence (PL) spectroscopy. XRD pattern indicated cubic zinc blende structure for ZnSe NCs and the TEM image indicated round-shaped particles, most of which had a diameter of about 3 nm. Band gap of ZnSe NCs was obtained as about 3.6 eV, which was decreased by increasing the illumination time. Synthesized NCs indicated intensive and narrow emission in the UV-blue area (370 nm) related to the excitonic recombination and a broad band emission with a peak located at about 490 nm originated from the DAP (donor–acceptor pairs) recombination. ZnS shell was grown on ZnSe cores using a reaction based on the photo-sensitivity of Na 2 S 2 O 3 . For ZnSe@ZnS core–shell NCs, XRD diffraction peaks shifted to higher angles. TEM image indicated a shell around cores and most of the ZnSe@ZnS NCs have a diameter of about 5 nm. After the ZnS growth, ZnSe excitonic emission shifted to the longer wavelength and PL intensity was increased considerably. PL QY was obtained about 11% and 17% for ZnSe and ZnSe@ZnS core–shell QDs respectively. - Highlights: • A green photochemical approach was reported for synthesis of ZnSe NCs. • ZnS shell was grown around ZnSe using a new method. • Synthesis method was rapid, simple and at room temperature. • ZnSe NCs indicated a narrow UV-blue and a broad DAP emissions. • PL intensity was increased considerably by ZnS shell growth

  9. Study of the 76788082Se(d,p)77798183Se reactions using polarized deuterons

    International Nuclear Information System (INIS)

    Montestruque, L.A.

    1978-01-01

    Differential cross sections and vector analyzing powers were measured at an incident deuteron energy of 12.5 MeV for the 76 78 80 82 Se(d,p) 77 79 81 83 Se reactions. The data are compared with the predictions of the DWBA theory to determine the l-value, spin, parity and spectroscopic factor of the resolved states. High resolution measurements were made with a 100 cm broad-range magnetic spectrograph to determine the excitation energies of the states studied, and the possible existence of contaminants in the targets. Definitive spin and parity assignments are made to 16 states in 77 Se, 22 states in 79 Se, 17 states in 81 Se, and 18 states in 83 Se, fifteen of which were previously assigned. In addition, tentative spin assignments were made to one state in 83 Se. The spectrograph measurements allowed the determination of the excitation energies of anumber of additional states in each isotope. Among the 76 states studied in this work, ther are 8 2P/sub 3/2/ states, 4 1F/sub 5/2/ states 6 2P/sub 1/2/ states 4 1G/sub 9/2/ states, 31 2D/sub 5/2/ states, 10 3S/sub 1/2/ states, and 13 2D/sub 3/2 states. A sum-rule analysis was made and the results compared to previous work and to the predictions of the simple pairing theory

  10. Synthesis and Characteristics of HgCdSe for IR Detection

    Science.gov (United States)

    2014-03-11

    HgCdSe layers. Positron annihilation spectroscopy measurements were carried out. These suggest the presence of p-type mercury vacancies in Hg1-xCdxSe...Photoelectron Spectroscopy Study of Oxide Removal Using Atomic Hydrogen for Large-Area II–VI Material Growth, Journal of Electronic Materials... Applications ,” K. Doyle, G. Brill, Y. Chen, T. H. Myers, S. Trivedi. 2012 SPIE Conference, San Diego CA (August 2012) “Determination of critical

  11. Opportunities and challenges for a sustainable energy policy in SE Europe: SE European Energy Community Treaty

    International Nuclear Information System (INIS)

    Mihajlov, Andjelka

    2010-01-01

    Energy demand continues to increase in turn raising concerns about energy supply. In this paper, the author has tried to systematize the role of the energy sector in South Eastern (SE) Europe in the context of the European energy policy process. This should make the energy sector in SE Europe more visible and open to substantial activities and appropriate funding. This is important to assure its full alignment with the European energy policy process, and in so doing, make it less fragile. According to the SE European Energy Community Treaty, parties to the Treaty are obliged to implement reforms in the energy and environmental sector in accordance with the European Union's respective policy. This paper raises awareness of the environmental requirements that have been set, of renewable energy and its implementation, at the same time pointing out that the response in SE Europe has been at a low level. It is believed that this paper could draw attention to the existing problems and could contribute to the establishment of a common integrated energy market in SE Europe and the EU. (author)

  12. ZnSe MSM photodetectors prepared on GaAs and ZnSe substrates

    International Nuclear Information System (INIS)

    Lin, T.K.; Chang, S.J.; Su, Y.K.; Chiou, Y.Z.; Wang, C.K.; Chang, S.P.; Chang, C.M.; Tang, J.J.; Huang, B.R.

    2005-01-01

    Homoepitaxial and heteroepitaxial ZnSe metal-semiconductor-metal (MSM) photodetectors were both fabricated and characterized. It was found that homoepitaxial ZnSe MSM photodetector could provide us smaller dark current and large photocurrent. With an incident wavelength of 448 nm, it was found that the maximum responsivities for the homoepitaxial and heteroepitaxial ZnSe photodetectors were 0.128 and 0.045 A/W, which corresponds to a quantum efficiency of 36 and 12%, respectively. Furthermore, it was found that we achieved the minimum noise equivalent power (NEP) of 7.6 x 10 -13 W and the maximum normalized detectivity (D *) of 9.3 x 10 11 cm Hz 0.5 W -1 from our homoepitaxial ZnSe photodetector. In contrast, NEP and D * of the heteroepitaxial ZnSe photodetector were 2.9 x 10 -12 W and 2.44 x 10 11 cm Hz 0.5 W -1 , respectively

  13. Thermoelectric study of Ag doped SnSe-Sb2Se3 based alloy

    Science.gov (United States)

    Das, Anish; Talukdar, M.; Kumar, Aparabal; Sarkar, Kalyan Jyoti; Dhama, P.; Banerji, P.

    2018-05-01

    In this article we have synthesized p-type alloy of SnSe and Sb2Se3 (10 atomic %) to study the thermoelectric transport properties. The alloy was prepared by melt grown technique followed by spark plasma sintering and latter doped with 2 atomic % Ag to compensate the carrier density in order to achieve higher electrical conductivity (σ). Out of these, the doped sample resulted in the maximum figure of merit, ZT˜0.7 at 773 K due to the existence of the secondary phase AgSbSe2 and reduced lattice thermal conductivity (0.61 W m-1 K-1 at 300 K). The fitted lattice thermal conductivity shows that point defect and Umklapp scattering are the primary process of phonon scattering for all the samples whereas the fitted mobility data confirms acoustic phonon scattering along with point defect and grain boundary scattering to be the main carrier scattering mechanism. More over room temperature carrier density and electrical conductivity are found to increase for the doped sample which further corroborate (90%)SnSe-(10%)Sb2Se3:2%Ag to be a potential candidate for highly efficient thermoelectric materials.

  14. No se olviden de Bernardo (Kordon

    Directory of Open Access Journals (Sweden)

    Eduardo Romano

    2006-09-01

    Full Text Available No casualmente el título coincide con un eslogan muy divulgado y que intenta conservar la memoria acerca de un hecho y de una víctima. No lo son también aquellos escritores a los que una mezquina política de mercado condena poco menos que al olvido, luego de que durante décadas animaran el proceso literario nacional y obtuvieran reconocimientos de diverso carácter por su producción? No me cabe duda de que Bernardo Kordon (1915-2002 fue uno de esos animadores de la narrativa nacional, al que es indispensable volver para que se entiendan mejor algunos cambios sucedidos en ella a partir de los años 50, aunque su culminación date de la década del 60 y un poco más.

  15. La lectura en el aula. Qué se hace, qué se debe hacer y qué se puede hacer

    OpenAIRE

    Pablo Lorente Muñoz

    2011-01-01

    Emilio Sánchez Miguel (Coord.). La lectura en el aula. Qué se hace, qué se debe hacer y qué se puede hacer. Graó, col. Crítica y Fundamentos, 27. Barcelona, 2010. 382 págs. ISBN: 978-84-7827-892-3

  16. Structure of Se-rich As-Se glasses by high-resolution x-ray photoelectron spectroscopy

    International Nuclear Information System (INIS)

    Golovchak, R.; Kovalskiy, A.; Miller, A. C.; Jain, H.; Shpotyuk, O.

    2007-01-01

    To establish the validity of various proposed structural models, we have investigated the structure of the binary As x Se 100-x chalcogenide glass family (x≤40) by high-resolution x-ray photoelectron spectroscopy. From the composition dependence of the valence band, the contributions to the density of states from the 4p lone pair electrons of Se and the 4p bonding states and 4s electrons of Se and As are identified in the top part of the band. The analysis of Se 3d and As 3d core-level spectra supports the so-called chain crossing model for the atomic structure of Se-rich As x Se 100-x bulk glasses. The results also indicate small deviations (∼3-8%) from this model, especially for glass compositions with short Se chains (25 40 Se 60 and of Se-Se-Se fragments in a glass with composition x=30 is established

  17. Se-Se isoelectronic centers in high purity CdTe

    Energy Technology Data Exchange (ETDEWEB)

    Najjar, Rita; Andre, Regis; Mariette, Henri [CEA-CNRS, Nanophysique et Semiconducteurs, Institut Neel, 25 rue des martyrs, 38042 Grenoble (France); Golnik, Andrzej; Kossacki, Piotr; Gaj, Jan A. [Institute of Experimental Physics, University of Warsaw, Hoza 69, 00-681 Warsaw (Poland)

    2010-06-15

    We evidence zero-dimensional exciton states trapped on isoelectronic Se centers in CdTe quantum wells, {delta}-doped with Se. Thanks to special precautions taken to have very high purity CdTe heterostructures, it is possible to observe, in photoluminescence spectra, sharp discrete lines arising from individual centers related to the Se doping. These emission lines appear at about 40 meV below the CdTe band gap energy. The most prominent lines are attributed to the recombination of excitons bound to nearest-neighbor selenium pairs in a tetrahedral CdTe environment. This assignment is confirmed by a common linear polarization direction of the emitted light, parallel to <110>. These excitons localized on individual isoelectronic traps are good candidates as single photon emitters (copyright 2010 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  18. Synthesis and optical study of green light emitting polymer coated CdSe/ZnSe core/shell nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Tripathi, S.K., E-mail: surya@pu.ac.in [Department of Physics, Center of Advanced Study in Physics, Panjab University, Chandigarh 160 014 (India); Sharma, Mamta [Department of Physics, Center of Advanced Study in Physics, Panjab University, Chandigarh 160 014 (India)

    2013-05-15

    Highlights: ► Synthesis of Polymer coated core CdSe and CdSe/ZnSe core/shell NCs. ► From TEM image, the spherical nature of CdSe and CdSe/ZnSe is obtained. ► Exhibiting green band photoemission peak at 541 nm and 549 nm for CdSe core and CdSe/ZnSe core/shell NCs. ► The shell thickness has been calculated by using superposition of quantum confinement energy model. - Abstract: CdSe/ZnSe Core/Shell NCs dispersed in PVA are synthesized by chemical method at room temperature. This is characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), UV/Vis spectra and photoluminescence spectroscopy (PL). TEM image shows the spherical nature of CdSe/ZnSe core/shell NCs. The red shift of absorption and emission peak of CdSe/ZnSe core/shell NCs as compared to CdSe core confirmed the formation of core/shell. The superposition of quantum confinement energy model is used for calculation of thickness of ZnSe shell.

  19. Optical properties of thermally annealed CdZnSe/ZnSe quantum dots

    International Nuclear Information System (INIS)

    Margapoti, Emanuela

    2010-01-01

    To analyse the diffusion characteristics, photoluminescence (PL) spectroscopy has been carried out in extensive detail on single, as well as, ensembles of thermally annealed (TA) CdSe/ZnSe QDs. For a series of QD-ensembles, each annealed for t A = 30 s at temperatures from T A = 300-550 C, the change in the QD-composition has been calculated from the blue-shift of the exciton ground-state PL-emission, using a concentration function based on Fick's laws of diffusion. The diffusion length (L D ) and the activation energy (E A ) have been determined thereof. For the studied QDs, E A has been evaluated to be 2.2 eV. Additionally, TA results also in an enhancement of the PL-intensity and reduction of the full-width-at-half maximum (FWHM) of the spectra. This point towards an increased homogeneity of the QD-size and composition, and decrease in the concentration of defects around the QDs. For single CdSe/ZnSe QDs, TA has been varied from 100-240 C, in steps for 20 C, with t A kept fixed at 30 s. Finally, the evolution of the magneto-optic response with post-growth thermal annealing has been studied for both individual QDs and QD-ensembles. An external magnetic field, applied perpendicular to the plane of the QDs (Faraday configuration), results in Zeeman spin splitting of the ground exciton state. The emissions from the Zeeman-split states are left and right circularly polarized and from the degree of circular polarization (DCP), as well as, the spectral separation of the PL-peaks, the g-factor can be estimated. For CdSe/ZnSe QD-ensembles, the g-factor has been observed to change sign with TA. (orig.).

  20. Optical properties of thermally annealed CdZnSe/ZnSe quantum dots

    Energy Technology Data Exchange (ETDEWEB)

    Margapoti, Emanuela

    2010-07-01

    To analyse the diffusion characteristics, photoluminescence (PL) spectroscopy has been carried out in extensive detail on single, as well as, ensembles of thermally annealed (TA) CdSe/ZnSe QDs. For a series of QD-ensembles, each annealed for t{sub A} = 30 s at temperatures from T{sub A} = 300-550 C, the change in the QD-composition has been calculated from the blue-shift of the exciton ground-state PL-emission, using a concentration function based on Fick's laws of diffusion. The diffusion length (L{sub D}) and the activation energy (E{sub A}) have been determined thereof. For the studied QDs, E{sub A} has been evaluated to be 2.2 eV. Additionally, TA results also in an enhancement of the PL-intensity and reduction of the full-width-at-half maximum (FWHM) of the spectra. This point towards an increased homogeneity of the QD-size and composition, and decrease in the concentration of defects around the QDs. For single CdSe/ZnSe QDs, TA has been varied from 100-240 C, in steps for 20 C, with t{sub A} kept fixed at 30 s. Finally, the evolution of the magneto-optic response with post-growth thermal annealing has been studied for both individual QDs and QD-ensembles. An external magnetic field, applied perpendicular to the plane of the QDs (Faraday configuration), results in Zeeman spin splitting of the ground exciton state. The emissions from the Zeeman-split states are left and right circularly polarized and from the degree of circular polarization (DCP), as well as, the spectral separation of the PL-peaks, the g-factor can be estimated. For CdSe/ZnSe QD-ensembles, the g-factor has been observed to change sign with TA. (orig.).

  1. Simultaneous speciation of arsenic (As(III), MMA, DMA, and As(V)) and selenium (Se(IV), Se(VI), and SeCN{sup -}) in petroleum refinery aqueous streams

    Energy Technology Data Exchange (ETDEWEB)

    Tonietto, Gisele B.; Godoy, Jose M.; Oliveira, Ana Cristina [Pontificia Universidade Catolica do Rio de Janeiro, Rio de Janeiro, RJ (Brazil); Souza, Marcia V. de [Petrobras/Cenpes, Research and Development Center, Rio de Janeiro (Brazil)

    2010-07-15

    High-performance liquid chromatography (HPLC) coupled to an ICP-MS with an octapole reaction system (ORS) has been used to carry out quantitative speciation of selenium (Se) and arsenic (As) in the stream waters of a refining process. The argon dimers interfering with the {sup 78}Se and {sup 80}Se isotopes were suppressed by pressurizing the octapole chamber with 3.1 mL min{sup -1} H{sub 2} and 0.5 mL min{sup -1} He. Four arsenic species arsenite - As(III), arsenate (As(V)), monomethylarsonic acid (MMA), and dimethylarsinic acid (DMA) - and three inorganic Se species - selenite Se(IV), selenate Se(VI), and selenocyanate (SeCN{sup -}) - were separated in a single run by ion chromatography (IC) using gradient elution with 100 mmol L{sup -1} NH{sub 4}NO{sub 3}, pH 8.5, adjusted by addition of NH{sub 3}, as eluent. Repeatabilities of peak position and of peak area evaluation were better than 1% and about 3%, respectively. Detection limits (as 3{sigma} of the baseline noise) were 81, 56, and 75 ng L{sup -1} for Se(IV), Se(VI), and SeCN{sup -}, respectively, and 22, 19, 25, and 16 ng L{sup -1} for As(III), As(V), MMA, and DMA, respectively. Calibration curve R {sup 2} values ranged between 0.996 and 0.999 for the arsenic and selenium species. Column recovery for ion chromatography was calculated to be 97 {+-} 6% for combined arsenic species and 98 {+-} 3% for combined selenium species. Because certified reference materials for As and Se speciation studies are still not commercially available, in order to check accuracy and precision the method was applied to certified reference materials, BCR 714, BCR 1714, and BCR 715 and to two different refinery samples - inlet and outlet wastewater. The method was successfully used to study the quantitative speciation of selenium and arsenic in petroleum refinery wastewaters. (orig.)

  2. Clinical experience with 75Se selenomethylcholesterol adrenal imaging

    International Nuclear Information System (INIS)

    Shapiro, B.; Britton, K.E.; Hawkins, L.A.; Edwards, C.R.W.

    1981-01-01

    The results of quantitative adrenal imaging using 75 Se selenomethylcholesterol in sixty-two subjects are analysed. The adrenal area was localized by a renal scan, lateral views of which enabled adrenal depth to be estimated. The first nineteen cases were scanned with a rectilinear scanner and the remaining forty-three cases imaged with a gamma camera. Quantitation of adrenal uptake was performed on computer-stored static images obtained 7 and 14 days post-injection of 75 Se selenomethylcholesterol (3 and 6 days in the first ten cases studied). Normal uptake was found to be 0.07-0.30% of the administered dose. Overall predictive accuracy of the type of adrenal disorder of thirty-two patients with Cushing's syndrome was 90.6%. Overall predictive accuracy of the cause of Conn's syndrome in twenty-two cases was 86.4%. The mean uptake in the normal adrenal in cases of unilateral adenoma was 0.19% (range 0.07-0.30%). Causes of unsatisfactory adrenal imaging are examined. The procedure is recommended as the localizing and lateralizing technique of choice in Cushing's syndrome except where due to adrenal carcinoma, and as an important non-invasive technique in Conn's syndrome for the lateralization of adenoma. (author)

  3. In situ observation of the formation of FeSe

    DEFF Research Database (Denmark)

    Grivel, Jean-Claude; Wulff, Anders Christian; Yue, Zhao

    2011-01-01

    The formation of the FeSe compound from a mixture of Fe and Se powders encased in a composite Cu/Nb sheath was studied in situ by means of high-energy synchrotron x-ray diffraction. Tetragonal beta-FeSe does not seem to form directly from the starting elements. Instead, a sequence of FeSe2, Fe3Se...

  4. CIGS thin films, solar cells, and submodules fabricated using a rf-plasma cracked Se-radical beam source

    International Nuclear Information System (INIS)

    Ishizuka, Shogo; Yamada, Akimasa; Shibata, Hajime; Fons, Paul; Niki, Shigeru

    2011-01-01

    Coevaporated Cu(In,Ga)Se 2 (CIGS) film growth using a rf-plasma cracked Se-radical beam (R-Se) source leads to a significant reduction in the amount of raw Se source material wasted during growth and exhibits unique film properties such as highly dense, smooth surfaces and large grain size. R-Se grown CIGS solar cells also show concomitant unique properties different from conventional evaporative Se (E-Se) source grown CIGS cells. In the present work, the impact of modified surfaces, interfaces, and bulk crystal properties of R-Se grown CIGS films on the solar cell performance was studied. When a R-Se source was used, Na diffusion into CIGS layers was enhanced while a remarkable diffusion of elemental Ga and Se into Mo back contact layers was observed. Improvements in the bulk crystal quality as manifested by large grain size and increased Na concentration with the use of a R-Se source is expected to be effective to improve photovoltaic performance. Using a R-Se source for the growth of CIGS absorber layers at a relatively low growth temperature, we have successfully demonstrated a monolithically integrated submodule efficiency of 15.0% (17 cells, aperture area of 76.5 cm 2 ) on 0.25-mm thick soda-lime glass substrates.

  5. American Indian/ Alaska Native Area/ Hawaiian Homeland Areas for San Juan County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  6. Benefits of oxygen in CuInSe{sub 2} and CuGaSe{sub 2} containing Se-rich grain boundaries

    Energy Technology Data Exchange (ETDEWEB)

    Feng, Chunbao, E-mail: chunbaofeng@126.com [Department of Mathematics and Physics, Chongqing University of Posts and Telecommunications, Chongqing, 400065 (China); Luo, Min; Li, Bolin; Li, Dengfeng [Department of Mathematics and Physics, Chongqing University of Posts and Telecommunications, Chongqing, 400065 (China); Nie, Jinlan [Department of Applied Physics, University of Electronic Science and Technology of China, Chengdu, 610054 (China); Dong, Huining [Department of Mathematics and Physics, Chongqing University of Posts and Telecommunications, Chongqing, 400065 (China)

    2014-05-01

    Using density functional theory calculation, we show that oxygen (O) exhibits an interesting effect in CuInSe{sub 2} and CuGaSe{sub 2}. The Se atoms with dangling bonds in a Se-rich Σ3 (114) grain boundary (GB) create deep gap states due to strong interaction between Se atoms. However, when such a Se atom is substituted by an O atom, the deep gap states can be shifted into valence band, making the site no longer a harmful non-radiative recombination center. We find that O atoms prefer energetically to substitute these Se atoms and induce significant lattice relaxation due to their smaller atomic size and stronger electronegativity, which effectively reduces the anion–anion interaction. Consequently, the deep gap states are shifted to lower energy regions close or even below the top of the valence band.

  7. Phase diagram of SnTe-CdSe cross-section of SnTe+CdSe reversible SnSe+CdTe ternary reciprocal system

    International Nuclear Information System (INIS)

    Dubrovin, I.V.; Budennaya, L.D.; Mizetskaya, I.B.; Sharkina, Eh.V.

    1986-01-01

    Phase equilibrium diagram of SnTe-CdSe cross-section of Sn, Cd long Te, Se ternary reciprocal system is investigated using the methods of differential thermal, X-ray phase, and microstructural analyses. Maximum length of solid solutions on the base of SnTe corresponds to approximately 14 mol.% at 1050 K and approximately 3 mol.% of CdSe at 670 K. Region of solid solutions on the base of CdSe corresponds to less than 1 mol.% of SnTe at room temperature. SnTe-CdSe cross-section is not a quasibinar one. Equilibrium is shifted to the left in the SnTe+CdSe reversible SnSe+CdTe reciprocal system

  8. Mantle structure and tectonic history of SE Asia

    Science.gov (United States)

    Hall, Robert; Spakman, Wim

    2015-09-01

    Seismic travel-time tomography of the mantle under SE Asia reveals patterns of subduction-related seismic P-wave velocity anomalies that are of great value in helping to understand the region's tectonic development. We discuss tomography and tectonic interpretations of an area centred on Indonesia and including Malaysia, parts of the Philippines, New Guinea and northern Australia. We begin with an explanation of seismic tomography and causes of velocity anomalies in the mantle, and discuss assessment of model quality for tomographic models created from P-wave travel times. We then introduce the global P-wave velocity anomaly model UU-P07 and the tectonic model used in this paper and give an overview of previous interpretations of mantle structure. The slab-related velocity anomalies we identify in the upper and lower mantle based on the UU-P07 model are interpreted in terms of the tectonic model and illustrated with figures and movies. Finally, we discuss where tomographic and tectonic models for SE Asia converge or diverge, and identify the most important conclusions concerning the history of the region. The tomographic images of the mantle record subduction beneath the SE Asian region to depths of approximately 1600 km. In the upper mantle anomalies mainly record subduction during the last 10 to 25 Ma, depending on the region considered. We interpret a vertical slab tear crossing the entire upper mantle north of west Sumatra where there is a strong lateral kink in slab morphology, slab holes between c.200-400 km below East Java and Sumbawa, and offer a new three-slab explanation for subduction in the North Sulawesi region. There is a different structure in the lower mantle compared to the upper mantle and the deep structure changes from west to east. What was imaged in earlier models as a broad and deep anomaly below SE Asia has a clear internal structure and we argue that many features can be identified as older subduction zones. We identify remnants of slabs

  9. The distribution and habitat requirements of the genus Orobanche L. (Orobanchaceae in SE Poland

    Directory of Open Access Journals (Sweden)

    Renata Piwowarczyk

    2011-05-01

    Full Text Available The distribution of the genus Orobanche in SE Poland is presented. The study area stretches between the Vistula and the Bug rivers, and comprises the Polish areas of the Lublin-Lwów Upland, the Wołyń Upland and the southern part of Polesie. Eight species of the genus Orobanche: O. alba, O. alsatica, O. arenaria, O. caryophyllacea, O. elatior, O. lutea, O. pallidiflora, O. picridis, were collected during floristic investigations conducted between 1999 and 2010. The hosts, abundance and habitat preferences at the localities are given and a supplemented map of the distribution in SE Poland is included.

  10. Uma vida que se esvai no Parkinson

    Directory of Open Access Journals (Sweden)

    Eliane Michelini Marraccini

    Full Text Available A doença de Parkinson é uma síndrome neurológica de evolução lenta e progressiva que emerge na idade madura e velhice. A crescente debilitação física contrasta com a manutenção da integridade mental, na maioria dos pacientes até o fim da vida. Nessa enfermidade incurável, que costuma perdurar por longos anos, surgem importantes reações físicas diante da progressiva incapacitação, com profundos reflexos na subjetividade do paciente. Este trabalho refere-se ao atendimento de uma paciente, acompanhada em seu processo de conscientização e elaboração da irreversibilidade da doença. Ao final,é ressaltada a intrínseca articulação somatopsíquica, com destaque para a depressão na acentuação dos sintomas parkinsonianos.

  11. Determination of total, and bound Se in sera by INAA

    International Nuclear Information System (INIS)

    Spate, V.L.; Mason, M.M.; Reams, C.L.; Baskett, C.K.; Morris, J.S.; Mills, D.S.

    1994-01-01

    The comparison between the total selenium in serum ('total Se') with that which is apparently bound to high molecular weight (> 12.000 D) species, presumably proteins ('bound Se') was reported. Nine hundred seventy seven (977) serum samples arising out of a population-based epidemiological study were prepared in duplicate for the determination of 'total Se' by pipeting directly into irradiation vials; and separate duplicate aliquots were dialyzed against DI water for the determination of 'bound Se'. All samples were analyzed by neutron activation analysis via 77m Se (17.4s) A small dialyzable Se component (∼ 6%) ('free Se'), defined as the difference between the 'total Se' minus the 'bound Se', was identified. (author) 2 refs.; 3 figs.; 5 tabs

  12. Revitalization Areas

    Data.gov (United States)

    Department of Housing and Urban Development — Revitalization areas are HUD-designated neighborhoods in need of economic and community development and where there is already a strong commitment by the local...

  13. 700 Area

    Data.gov (United States)

    Federal Laboratory Consortium — The 700 Area of the Hanford Site is located in downtown Richland.Called the Federal Office Building, the Richland Operations Site Manager and the Richland Operations...

  14. Alternative syntheses of [73,75Se]selenoethers exemplified for homocysteine[73,75Se]selenolactone

    International Nuclear Information System (INIS)

    Ermert, J.; Blum, T.; Hamacher, K.; Coenen, H.H.

    2001-01-01

    The present work describes two radiosynthetic pathways to prepare homocysteine[ 75 Se]selenolactone 1 starting from n.c.a. [ 75 Se]selenite 2. It was achieved either by alkylation reaction of n.c.a. methyl[ 75 Se]selenide 4 or by hydrolysis of alkylated 1,3-dicyclohexyl[ 75 Se]selenourea 11. N.c.a. methyl[ 75 Se]selenide 4 is available using sulfur as non-isotopic carrier. However, the radiochemical yield of the substitution of 2-tert.-butoxycarbonylamino-4-bromobutyric acid ethylester 5 with n.c.a. methyl-[ 75 Se]selenide is only in the range of 15%-20%. Birch reduction of protected n.c.a. [ 75 Se]selenomethionine 6 formed leads to a RCY of 5%-10% homocysteine[ 75 Se]selenolactone 1. Alternatively, the synthesis of homocysteine[ 75 Se]selenolactone 1 is possible by hydrolysis of the corresponding [ 75 Se]selenouronium salt 11 available by addition of 2-tert.-butoxycarbonylamino-4-bromobutyric acid ethylester 5 to 1,3-dicyclohexyl[ 75 Se]selenourea 10. A method was developed for the synthesis of 1,3-dicyclohexyl[ 75 Se]selenourea 10 by addition of c.a. [ 75 Se]SeH 2 to 1,3-dicyclohexylcarbodiimide, which leads to 20%-30% RCY of c.a. homocysteine[ 75 Se]selenolactone 1. (orig.)

  15. Current Urban Areas for Santa Fe County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  16. 2000 Census Urban Areas for Los Alamos County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  17. Current 5-Digit ZIP Code Tabulation Areas (ZCTAs) for Quay County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  18. Current Urban Areas for Luna County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  19. Current Core Based Statistical Areas for Chaves County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  20. 2000 Census Public Use Microdata Area (PUMA) 1% for Chaves County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  1. 2000 Census Public Use Microdata Area (PUMA) 1% for Sandoval County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  2. American Indian Tribal Subdivision Areas for Socorro County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  3. 2000 Census Metropolitan Statistical Areas (MSA) for Sandoval County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  4. American Indian Tribal Subdivision Areas for Sandoval County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  5. American Indian Tribal Subdivision Areas for Bernalillo County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  6. 2000 Census Public Use Microdata Area (PUMA) 5% for Hidalgo County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  7. 2000 Census Public Use Microdata Area (PUMA) 1% for Catron County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  8. 2000 Census Public Use Microdata Area (PUMA) 1% for Otero County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  9. Current 3-Digit ZIP Code Tabulation Areas (ZCTAs) for Guadalupe County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  10. Current Urban Areas for Hidalgo County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  11. 2000 Census Public Use Microdata Area (PUMA) 5% for Sandoval County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  12. Current 3-Digit ZIP Code Tabulation Areas (ZCTAs) for Union County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  13. 2000 Census Public Use Microdata Area (PUMA) 5% for Otero County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  14. 2000 Census Public Use Microdata Area (PUMA) 5% for Mora County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  15. Current 3-Digit ZIP Code Tabulation Areas (ZCTAs) for Torrance County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  16. Current Combined Statistical Areas for Curry County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  17. Current 3-Digit ZIP Code Tabulation Areas (ZCTAs) for Sierra County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  18. Current Urban Areas for Lincoln County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  19. American Indian Tribal Subdivision Areas for San Juan County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  20. Current 5-Digit ZIP Code Tabulation Areas (ZCTAs) for Guadalupe County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  1. Current Urban Areas for Cibola County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  2. Current Core Based Statistical Areas for Los Alamos County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  3. American Indian Tribal Subdivision Areas for Rio Arriba County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  4. Current 5-Digit ZIP Code Tabulation Areas (ZCTAs) for Valencia County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  5. Current 3-Digit ZIP Code Tabulation Areas (ZCTAs) for Roosevelt County, New Mexico, 2006se TIGER

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — The 2006 Second Edition TIGER/Line files are an extract of selected geographic and cartographic information from the Census TIGER database. The geographic coverage...

  6. Structure and optical properties of GaSe-CdSe composites driven by Cd intercalation in GaSe lamellar crystals

    International Nuclear Information System (INIS)

    Caraman, Iuliana; Kantser, Valeriu; Evtodiev, Igor; Untila, Dumitru; Dmitroglo, Liliana; Leontie, Liviu; Arzumanyan, Grigory

    2015-01-01

    A new composite material composed of GaSe and CdSe has been obtained by treatment of GaSe single-crystal lamellas in Cd vapors at temperatures of 773-853 K and intercalation of Cd interlayers. The structure and optical properties of the GaSe-CdSe composite material have been studied. The content of CdSe crystallites was found to grow with increasing treatment temperature or with increasing duration of treatment at a constant temperature. Analysis of XRD, PL, XPS, AFM, and Raman patterns has shown that the heterogeneous composite composed of micro and nanocrystallites of CdSe in GaSe can be obtained by Cd intercalation in a temperature range of 753-853 K. On the basis of Raman spectrum, the vibrational modes of the composite have been identified. The PL of these materials contains emission bands of free and bound excitons, donor-acceptor bands, and bands of recombination via impurity levels. The PL emission spectra measured at a temperature of 78 and 300 K for the composites result from the overlapping of the emission bands of the components of GaSe doped with Cd and the CdSe crystallites. (authors)

  7. The influence of CdSe and ZnSe nanoparticles on the optical properties of Sm"3"+ ions in lead borate glasses

    International Nuclear Information System (INIS)

    Mallur, Saisudha B.; Heidorn, William D.; Fatokun, Stephen O.; Joshi, Krishna D.; Bista, Sandip S.; Babu, Panakkattu K.

    2017-01-01

    The effect of glass composition and the presence of CdSe/ZnSe nanoparticles (NPs) on the optical absorption and fluorescence of Sm-doped lead borate glasses are studied. Three sets of glass samples xPbO:(99.5-x) B_2O_3:0.5Sm_2O_3, x = 29.5–69.5 mol%, xPbO:(96.5-x) B_2O_3:0.5Sm_2O_3: 3CdSe/ZnSe, x = 36.5, and 56.5 mol% are prepared. NPs are grown by annealing these glasses just below the glass transition temperature. Average size of both types of NPs increases with annealing time; however, CdSe NPs grew to a larger size range (2 to 20 nm) compared to ZnSe NPs (1 to 16 nm). We analyzed the hypersensitive transition, intensity parameters, radiative transition probability, stimulated emission cross section (σ_p), and the area ratio of the electric dipole/magnetic dipole transitions of Sm"3"+. The intensity parameters show a minimum at 11 h annealing for 36.5 mol% and a maximum for the same annealing duration in 56.5 mol% PbO containing CdSe NPs. The σ_p for 56.5 mol% of PbO with CdSe NPs is found to be a maximum when the average NP size is around 14 nm. ZnSe NPs containing glasses also show significant changes in σ_p when the average particle size is ~16 nm, for 36.5 mol% PbO. Our results suggest that the optical properties of Sm"3"+ in lead borate glasses are sensitive to its electronic environment which can be modified by varying the base glass composition and/or incorporating large NPs of CdSe/ZnSe. The large σ_p values that we observe for some of the glass compositions make them attractive materials for photonic devices and photovoltaic applications.

  8. The influence of CdSe and ZnSe nanoparticles on the optical properties of Sm{sup 3+} ions in lead borate glasses

    Energy Technology Data Exchange (ETDEWEB)

    Mallur, Saisudha B.; Heidorn, William D.; Fatokun, Stephen O.; Joshi, Krishna D.; Bista, Sandip S.; Babu, Panakkattu K., E-mail: PK-Babu@wiu.edu [Western Illinois University, Department of Physics (United States)

    2017-03-15

    The effect of glass composition and the presence of CdSe/ZnSe nanoparticles (NPs) on the optical absorption and fluorescence of Sm-doped lead borate glasses are studied. Three sets of glass samples xPbO:(99.5-x) B{sub 2}O{sub 3}:0.5Sm{sub 2}O{sub 3}, x = 29.5–69.5 mol%, xPbO:(96.5-x) B{sub 2}O{sub 3}:0.5Sm{sub 2}O{sub 3}: 3CdSe/ZnSe, x = 36.5, and 56.5 mol% are prepared. NPs are grown by annealing these glasses just below the glass transition temperature. Average size of both types of NPs increases with annealing time; however, CdSe NPs grew to a larger size range (2 to 20 nm) compared to ZnSe NPs (1 to 16 nm). We analyzed the hypersensitive transition, intensity parameters, radiative transition probability, stimulated emission cross section (σ{sub p}), and the area ratio of the electric dipole/magnetic dipole transitions of Sm{sup 3+}. The intensity parameters show a minimum at 11 h annealing for 36.5 mol% and a maximum for the same annealing duration in 56.5 mol% PbO containing CdSe NPs. The σ{sub p} for 56.5 mol% of PbO with CdSe NPs is found to be a maximum when the average NP size is around 14 nm. ZnSe NPs containing glasses also show significant changes in σ{sub p} when the average particle size is ~16 nm, for 36.5 mol% PbO. Our results suggest that the optical properties of Sm{sup 3+} in lead borate glasses are sensitive to its electronic environment which can be modified by varying the base glass composition and/or incorporating large NPs of CdSe/ZnSe. The large σ{sub p} values that we observe for some of the glass compositions make them attractive materials for photonic devices and photovoltaic applications.

  9. Synthesis of selenium/EDTA-derived porous carbon composite as a Li–Se battery cathode

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Chenhao, E-mail: zhaochenhao123456@163.com; Fang, Shuzhen; Hu, Zhibiao, E-mail: zhibiaohu@163.com; Qiu, Sheng’en; Liu, Kaiyu [LongYan University, College of Chemistry & Materials Science (China)

    2016-07-15

    The carbon substrate with unique 3D macroporous structure has been prepared through the immediate carbonization of ethylenediaminetetraacetic acid (EDTA) and KOH mixture. The porous carbon composed of micro- and small mesoporous (2–5 nm) structure has a BET specific surface area of 1824.8 m{sup 2} g{sup −1}. The amorphous and nanosized Se is uniformly encapsulated into the porous structure of porous carbon using melting diffusion route, and the weight content of Se in target Se/C composite can be as high as ~50 %. As an Li–Se battery cathode, the Se/C composite delivers a reversible (2nd) discharge capacity of 597.4 mAh g{sup −1} at 0.24C and retains a discharge capacity of 538.4 mAh g{sup −1} at 0.24C after 100 cycles. Furthermore, the composite also has a stable capacity of 291.0 mAh g{sup −1} at a high current of 4.8C. The high specific area and good porous size of EDTA-derived carbon substrate may a be responsibility for the excellent electrochemical performances of Se/C composite.

  10. Low-Temperature Deposition of Layered SnSe2 for Heterojunction Diodes

    KAUST Repository

    Serna, Martha I.

    2018-04-27

    Tin diselenide (SnSe) has been recently investigated as an alternative layered metal dichalcogenide due to its unique electrical and optoelectronics properties. Although there are several reports on the deposition of layered crystalline SnSe films by chemical and physical methods, synthesis methods like pulsed laser deposition (PLD) are not reported. An attractive feature of PLD is that it can be used to grow 2D films over large areas. In this report, a deposition process to grow stoichiometric SnSe on different substrates such as single crystals (Sapphire) and amorphous oxides (SiO and HfO) is reported. A detailed process flow for the growth of 2D SnSe at temperatures of 300 °C is presented, which is substantially lower than temperatures used in chemical vapor deposition and molecular beam epitaxy. The 2D SnSe films exhibit a mobility of ≈4.0 cm V s, and are successfully used to demonstrate SnSe/p-Si heterojunction diodes. The diodes show I /I ratios of 10-10 with a turn on voltage of <0.5 V, and ideality factors of 1.2-1.4, depending on the SnSe film growth conditions.

  11. Chemical synthesis of Cu2Se nanoparticles at room temperature

    International Nuclear Information System (INIS)

    Rong, Fengxia; Bai, Yan; Chen, Tianfeng; Zheng, Wenjie

    2012-01-01

    Graphical abstract: The Cu 2 Se nanoparticles were synthesized by a simple and rapid method at room temperature. The TEM and SEM images show that the Cu 2 Se nanoparticles were spherical. Highlights: ► Cu 2 Se nanoparticles were synthesized by the reaction of nanoSe 0 sol with Cu + ions. ► The Cu 2 Se nanoparticles were spherical with cubic structure and well crystallized. ► Optical and electrochemical properties of Cu 2 Se nanoparticles were observed. ► The formation mechanism of Cu 2 Se nanoparticles was proposed. -- Abstract: A simple and rapid method has been developed to synthesize cuprous selenide (Cu 2 Se) nanoparticles by the reaction of selenium nanoparticles sol with copper sulfate solution containing ascorbic acid at room temperature. Cu 2 Se nanoparticles were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and energy dispersive X-ray analysis (EDX). The results indicated that Cu 2 Se nanoparticles were cubic crystal structure and spherical with the diameter about 75 nm. The ultraviolet–visible absorption spectrum (UV–vis) and cyclic voltammetry of Cu 2 Se nanoparticles were also investigated. The optical band gap energy of Cu 2 Se nanoparticles was 1.94 eV. On the basis of a series of experiments and characterizations, the formation mechanism of Cu 2 Se nanoparticles was discussed.

  12. La desaceleración económica colombiana: se cosecha lo que se siembra

    Directory of Open Access Journals (Sweden)

    Carlos Humberto Ortiz

    2009-12-01

    Full Text Available La desaceleración económica que experimenta Colombia desde 1980 se explica por el estancamiento estructural de la economía y por la escalada de violencia relacionada con la expansión del narcotráfico. Los datos disponibles no rechazan esta hipótesis. El artículo plantea que la desindustrialización y el narcotráfico se forjaron en el mismo crisol: un modelo de desarrollo que ha integrado progresivamente la economía nacional a los mercados mundiales al tiempo que ha renunciado, también progresivamente, a la opción industrialista. Además, argumenta que la explosión del narcotráfico obedece a la profundización de la guerra contra las drogas en un contexto de demanda mundial creciente e inelástica.

  13. SE-72/AS-72 generator system based on Se extraction/ As reextraction

    Science.gov (United States)

    Fassbender, Michael Ernst; Ballard, Beau D

    2013-09-10

    The preparation of a .sup.72Se/.sup.72As radioisotope generator involves forming an acidic aqueous solution of an irradiated alkali bromide target such as a NaBr target, oxidizing soluble bromide in the solution to elemental bromine, removing the elemental bromine, evaporating the resulting solution to a residue, removing hydrogen chloride from the residue, forming an acidic aqueous solution of the residue, adding a chelator that selectively forms a chelation complex with selenium, and extracting the chelation complex from the acidic aqueous solution into an organic phase. As the .sup.72Se generates .sup.72As in the organic phase, the .sup.72As may be extracted repeatedly from the organic phase with an aqueous acid solution.

  14. Optical band gap study of a-Se and Se-Sb thin films

    International Nuclear Information System (INIS)

    Kaur, Ramandeep; Singh, Palwinder; Thakur, Anup

    2016-01-01

    Amorphous selenium (a-Se) and a-Se_9_5Sb_5 alloy were prepared using melt quenching technique. X-ray diffraction (XRD) pattern confirmed the amorphous nature of the prepared samples. Composition of the prepared samples has been determined using Energy dispersive X-ray fluorescence (EDXRF) technique. Differential thermal analysis (DTA) confirmed the glassy nature of the prepared samples. Thin films of the prepared samples were deposited on glass substrate using thermal evaporation method. Amorphous nature of the deposited films was confirmed using XRD. Optical properties of these films were obtained from the UV-VIS transmission spectra, at normal incidence, over 200-1100 nm spectral range. The optical absorption edge was described by using the model given by the Tauc. Optical band gap of the deposited films was calculated using Tauc plot. Optical characterization showed that average transmission and optical band gap decreased with the addition of antinomy.

  15. Por uma cidade que se move e se comunica: corpo, rua e improviso

    Directory of Open Access Journals (Sweden)

    Julia Saldanha Vieira de Aguiar

    2009-06-01

    Full Text Available Este trabalho trata da relação de um lugar com suas pessoas. A reflexão acontece a partir de um estudo de caso: o Camelódromo da Praça XV. O Camelódromo foi uma grande feira, que durante 40 anos ocupou um espaço importante no centro de Porto Alegre/RS. (Auto organizado e vivido principalmente pelo povo, o fenômeno se configurava em um lugar onde improviso e estética constituiam o modo de ser e agir no cotidiano da rua. Ironicamente, no início de 2009, o Camelódromo foi transferido para dentro de um prédio. Hoje, onde se desenrolava o espetáculo do imprevisível, encontra-se um estacionamento para carros. Este trabalho foi produzido nos últimos meses do Camelódromo; em um espírito de elogio à estética do improviso e à auto-organização. Buscamos articular idéias da teoria da complexidade, do urbanismo, das artes e da comunicação, para tentar compreender um pouco essa manifestação espontânea, tão característica da urbe no século XXI.

  16. Expression and crystallization of SeDsbA, SeDsbL and SeSrgA from Salmonella enterica serovar Typhimurium

    International Nuclear Information System (INIS)

    Jarrott, R.; Shouldice, S. R.; Gunčar, G.; Totsika, M.; Schembri, M. A.; Heras, B.

    2010-01-01

    The cloning, purification, crystallization and preliminary crystallographic studies of three DsbA-like proteins present in S. enterica serovar Typhimurium, SeDsbA, SeDsbL and SeSrgA, are reported. Pathogens require protein-folding enzymes to produce functional virulence determinants. These foldases include the Dsb family of proteins, which catalyze oxidative folding in bacteria. Bacterial disulfide catalytic processes have been well characterized in Escherichia coli K-12 and these mechanisms have been extrapolated to other organisms. However, recent research indicates that the K-12 complement of Dsb proteins is not common to all bacteria. Importantly, many pathogenic bacteria have an extended arsenal of Dsb catalysts that is linked to their virulence. To help to elucidate the process of oxidative folding in pathogens containing a wide repertoire of Dsb proteins, Salmonella enterica serovar Typhimurium has been focused on. This Gram-negative bacterium contains three DsbA proteins: SeDsbA, SeDsbL and SeSrgA. Here, the expression, purification, crystallization and preliminary diffraction analysis of these three proteins are reported. SeDsbA, SeDsbL and SeSrgA crystals diffracted to resolution limits of 1.55, 1.57 and 2.6 Å and belonged to space groups P2 1 , P2 1 2 1 2 and C2, respectively

  17. Electrodeposition of epitaxial CdSe on (111) gallium arsenide

    Energy Technology Data Exchange (ETDEWEB)

    Cachet, H.; Cortes, R.; Froment, M. [Universite Pierre et Marie Curie, Paris (France). Phys. des Liquides et Electrochimie; Etcheberry, A. [Institut Lavoisier (IREM) UMR CNRS C0173, Universite de Versailles- St Quentin en Yvelynes, 45 Avenue des Etats Unis, 78035, Versailles (France)

    2000-02-21

    Epitaxial growth of CdSe has been achieved on GaAs(111) by electrodeposition from an aqueous electrolyte. The structure of the film corresponds to the cubic modification of CdSe. The quality of epitaxy has been investigated by reflection high energy electron diffraction, transmission electron microscopy and X-ray diffraction techniques. By XPS measurements the chemistry of the CdSe/GaAs interface and the composition of CdSe are determined. (orig.)

  18. Charge confinements in CdSe-ZnSe symmetric double quantum wells

    International Nuclear Information System (INIS)

    Tit, Nacir; Obaidat, Ihab M

    2008-01-01

    The bound states in the (CdSe) N w (ZnSe) N b (CdSe) N w -ZnSe(001) symmetric double quantum wells are investigated versus the well width (N w ) and the barrier thickness (N b ). A calculation based on the sp 3 s * tight-binding method which includes the spin-orbit interactions is employed to calculate the bandgap energy, quantum-confinement energy, and band structures. The studied systems possess a vanishing valence-band offset (VBO = 0) in consistency with the well known common-anion rule, and a large conduction-band offset (CBO ≅ 1 eV), which plays an essential role in the confinement of electrons within the CdSe wells. The biaxial strain, on the other hand, plays another role in confining the holes at the interfaces (within the well regions) and thus enhancing the radiative efficiency. The induced-strain energy is estimated to be ∼35 meV. More importantly, the results show that, for a fixed barrier thickness, the double wells are able to confine a pair of bound states when they are very thin. By increasing the wells' width (N w ), further, a new pair of states from the conduction-band continuum falls into the wells every time N w hits a multiple of four monolayers (more specifically, for 4n w ≤4(n+1), the number of bound states is 2(n+1), where n is an integer). On the other hand, the barrier thickness (N b ) is shown to have no effect on the number of bound states, but it solely controls their well-to-well interactions. A critical barrier thickness to switch off these latter interactions is estimated to occur at about N crit b ≅ 9 (L crit b ≅ 25∼AA. Rules governing the variation of the quantum-confinement energy versus both barrier thickness (N b ) and well width (N w ) have been derived. Our theoretical results are also shown to have excellent agreement with the available experimental photoluminescence data

  19. Complementary information on CdSe/ZnSe quantum dot local structure from extended X-ray absorption fine structure and diffraction anomalous fine structure measurements

    International Nuclear Information System (INIS)

    Piskorska-Hommel, E.; Holý, V.; Caha, O.; Wolska, A.; Gust, A.; Kruse, C.; Kröncke, H.; Falta, J.; Hommel, D.

    2012-01-01

    The extended X-ray absorption fine structure (EXAFS) and diffraction anomalous fine structure (DAFS) have been applied to investigate a local structure for the CdSe/ZnSe quantum dots grown by molecular beam epitaxy (MBE) and migration-enhanced epitaxy (MEE). The aim was to study the intermixing of Cd and Zn atoms, chemical compositions and strain induced by cap-layer. The EXAFS at the Cd K-edge and DAFS at the Se K-edge proved the intermixing of Cd and Zn atoms. The distances Cd–Se (2.61 Å) found from EXAFS and DAFS analysis for h 1 region is closer to that in bulk CdSe (2.62 Å). The DAFS analysis revealed the differences in the local structure in two investigated regions (i.e. different iso-strain volumes) on the quantum dots. It was found that the investigated areas differ in the Cd concentration. To explain the experimental results the theoretical calculation based on a full valence-force field (VFF) model was performed. The theoretical VFF model fully explains the experimental data.

  20. Die tema van God se spraak in Hebreërs se inleidingsformules

    Directory of Open Access Journals (Sweden)

    Albert J. Coetsee

    2015-03-01

    Full Text Available Alhoewel die voorkoms en gebruik van die Ou Testament in die meeste navorsing oor Hebreërs besonder baie aandag geniet, is dit nie die geval met die Hebreërskrywer se gebruik van inleidingsformules vir sy Ou-Testamentiese aanhalings nie. Die gevolg is dat daar tot op hede betreklik min selfstandige navorsing oor die Hebreërskrywer se tema van God se spraak by sy inleidingsformules gedoen is. In hierdie artikel word Hebreërs se inleidingsformules in besonderhede nagegaan om te bepaal wat die aard en inhoud van die Hebreërskrywer se verwysings na die tema van God se spraak in sy inleidingsformules is. Daar word onder andere bepaal dat Hebreërs 38 direkte aanhalings vanuit die Ou Testament bevat, dat die Hebreërskrywer, met slegs een uitsondering, elke inleidingsformule met ’n werkwoord van sêinlei, dat ’n Persoon van die Drie-eenheid in 34 van die 38 direkte aanhalings (± 89% die onderwerp en gevolglike Spreker van die Ou-Testamentiese woorde is, dat die Hebreërskrywer al drie Persone van die Drie-eenheid as God beskou, en dat die Hebreërskrywer oortuig is dat die Ou Testament geïnspireer is en God se geldige en relevante openbaring bly. The theme of God’s speech in Hebrews’ introduction formulae. Whilst the occurance and function of the Old Testament in research on Hebrews enjoys a lot of attention, this is not the case for the writer of Hebrews’ use of introduction formulae for his Old Testament quotations. The result is that up to date relatively few independent studies have been made on the writer of Hebrews’ theme of God’s speech in his introduction formulae. In this article the introduction formulae in Hebrews are researched in detail to determine the nature and content of the writer of Hebrews’ reference to the theme of God’s speech in his introduction formulae. Amongst other things it is determined that Hebrews has 38 direct quotations from the Old Testament, that with the exception of one

  1. Electronic structure and magnetic properties of KCrSe2

    NARCIS (Netherlands)

    Fang, C.M.; Tolsma, P.R.; Groot, R.A. de; Wiegers, G.A.; Haas, C.; vanBruggen, C.F.; deGroot, R.A.

    1996-01-01

    KCrSe2 characterized by x-ray powder diffraction is a layered compound isostructural with NaCrSe2: a = 3.80 Angstrom; c = 22.19 Angstrom; space group R (3) over bar m. The magnetic properties are similar to those of NaCrSe2 but with ari even more pronounced difference between the intralayer and

  2. Luminescence of nanocrystalline ZnSe:Mn2+

    NARCIS (Netherlands)

    Suyver, J.F.; Wuister, S.F.; Kelly, J.J.; Meijerink, A.

    2000-01-01

    The luminescence properties of nanocrystalline ZnSe:Mn^(2+) prepared via an inorganic chemical synthesis are described. Photoluminescence spectra show distinct ZnSe and Mn^(2+) related emissions, both of which are excited via the ZnSe host lattice. The Mn^(2+) emission wavelength and the

  3. Annealing effect on I-V characteristic of n-ZnO-p-InSe heterojunction

    Directory of Open Access Journals (Sweden)

    Kovalyuk Z. D.

    2015-12-01

    Full Text Available The article is devoted to studying of influence of vacuum low-temperature annealing on the electrical and photoelectric characteristics of n-ZnO-p-InSe heterostructure. Indium monoselenide (InSe is a semiconductor of the A3B6 group of layered compounds. The basic unit consists of two planes of metal atoms sandwiched between two planes of chalcogen atoms (Se-In-In-Se. The absence of dangling bonds on InSe cleaved surface makes it possible to use this semiconductor as a substrate for fabrication of heterostructures based on semiconductor materials with different symmetries and lattice spacings. Zinc oxide (ZnO is the most suitable material for window materials and solar cells buffer layers application due to its marvelous transparency in the range of visible region. InSe single crystals were grown by the Bridgman technique from a nonstoichiometric melt and characterized by a pronounced layered structure along the whole length of a sample. ZnO thin oxide film was formed on freshly cleaved van der Waals surface of InSe layered crystal. n-ZnO-p-InSe heterostructure was prepared by the method of high-frequency magnetron sputtering. Sensitivity spectral areas were identified by MDR-3 monochromator with a resolution of 2.6 nm/mm. The current-voltage characteristics of the n-ZnO-p-InSe heterostructures showed a clearly pronounced diode character. In the forward bias of the initial samples, the diode factor had the value 3.7 at room temperature. It is shown that vacuum low-temperature annealing reduces shunt currents of the heterojunction, which is reflected in the decrease in the values of n from 3.7 to 2.7.

  4. Optimal parameter selection for qualitative regional erosion risk monitoring: A remote sensing study of SE Ethiopia

    Directory of Open Access Journals (Sweden)

    Moncef Bouaziz

    2011-04-01

    Maps derived from this qualitative analysis allow the identification and ranking of erosion intensity. These maps enable us to highlight areas in immediate need of conservation strategies in order to control siltation of the SE Ethiopian reservoir and to control further soil degradation.

  5. Paleoseismological study on stone cultural sites in Gyeongju, SE Korea

    Science.gov (United States)

    Lee, M.; Jin, K.; Kim, Y.

    2008-12-01

    The Korean peninsular, located within the Eurasian intracontinental region, is presently considered to be tectonically safe compared with neighboring countries such as Japan and Taiwan. However, historical records for the Gyeongju area, which is an old capital city with many ancient stone buildings, demonstrate that seismic events have significantly affected lives and properties in this town. For example, one reported earthquake in 779 AD had an inferred magnitude of M=6.7 and resulted in the deaths of over a hundred people and the destruction of many buildings. This study examines the affects of paleoseismological events recorded by stone constructions in Gyeongju. The study area contains mostly granite and is located near the junction between the Yangsan and Ulsan faults, which represent two of the major faults in SE Korea. In May of 2007, a statue of Buddha that was previously attached to and carved from a vertical granite cliff was discovered resting on the 45° slope of the Yeolam valley. Based on the artistic style of the granite statue, it was estimated to be during the late 8th century; it has a weight of about 70 tons and dimensions of 250x190x620 cm. Four main joint directions exist in the statue and in granite exposed in the cliff at its original location. These joint sets match if the statue were rotated 15° clockwise back from present position. Another evidence for damages also occurs at ChumSungDae astronomical observatory. One possible cause for these destructions and damages is paleoseismicity in this area.

  6. Exotic topological insulator states and topological phase transitions in Sb2Se3-Bi2Se3 heterostructures

    KAUST Repository

    Zhang, Qianfan; Zhang, Zhiyong; Zhu, Zhiyong; Schwingenschlö gl, Udo; Cui, Yi

    2012-01-01

    in controlling the electronic properties of semiconductor devices, are interesting for topological insulators. Here, we studied the spatial distribution of the topological state in Sb 2Se 3-Bi 2Se 3 heterostructures by first-principle simulation and discovered

  7. Effect of dietary sodium selenite, Se-enriched yeast and Se-enriched Chlorella on egg Se concentration, physical parameters of eggs and laying hen production

    Czech Academy of Sciences Publication Activity Database

    Skřivan, M.; Šimáně, J.; Dlouhá, G.; Doucha, Jiří

    2006-01-01

    Roč. 51, č. 4 (2006), s. 163-167 ISSN 1212-1819 Institutional research plan: CEZ:AV0Z50200510 Keywords : sodium selenite * se-yeast * se-chlorella Subject RIV: EE - Microbiology, Virology Impact factor: 0.421, year: 2006

  8. PbSe Quantum Well VECSEL on Si

    Science.gov (United States)

    Fill, M.; Khiar, A.; Rahim, M.; Felder, F.; Zogg, H.

    2011-12-01

    Vertical external cavity surface emitting lasers in the wavelength region from 3-5 μm are presented. They are based on PbSe quantum wells grown on Si substrates. As host material Pb1-xEuxSe and Pb1-xSrxSe are used. With Pb1-xSrxSe as host material maximum operation temperatures of 325 K are achieved, while with Pb1-xEuxSe an operation temperature of 245 K could not be overcome. This may be explained by a band alignment transition from type I to type II with increasing temperature.

  9. Quiet areas

    DEFF Research Database (Denmark)

    Petersen, Rikke Munck

    2016-01-01

    This paper argues that drone filming can substantiate our understanding of multisensorial experiences of quiet areas and urban landscapes. Contrary to the distanced gaze often associated with the drone, this paper discusses drone filming as an intimate performativity apparatus that can affect...... perception as a result of its interrelationships between motion, gaze, and sound. This paper uses four films, one of which is a drone flyover, to launch a discussion concerning a smooth and alluring gaze, a sliding gaze that penetrates landscapes, and site appearance. Films hold the capacity to project both...... and transcendence can facilitate a deeper understanding of intimate sensations, substantiating their role in the future design and planning of urban landscapes. Hence, it addresses the ethics of an intimacy perspective (of drone filming) in the qualification of quiet areas....

  10. Lateral structure of (TiSe2)n(NbSe2)m superlattices

    International Nuclear Information System (INIS)

    Noh, M.; Shin, H.; Jeong, K.; Spear, J.; Johnson, D.C.; Kevan, S.D.; Warwick, T.

    1997-01-01

    The structures of a series of (TiSe 2 ) n (NbSe 2 ) m superlattices grown through controlled crystallization of designed multilayer reactants have been studied. X-ray diffraction of the data of the superlattices after crystallization show considerable preferred orientation, with the basal plane of the dichalcogenide structure parallel to the substrate to within 0.1 degree. Lattice refinement using the observed (00scr(l)) diffraction maxima yields lattice parameters along the c axis that are consistent with those expected based on the target superlattices and lattice parameters of the binary constituents. These (00scr(l)) diffraction data, however, contain no information about the crystalline structure in the ab plane of the superlattice associated with the preferred c-axis orientation. Off-specular x-ray diffraction (XRD), scanning electron microscopy, and scanning transmission x-ray microscopy (STXM) were used to explore the structure and homogeneity of the superlattices in the ab plane. XRD results rule out preferred long-range orientational order of the ab plane. Between grains, both the backscattered electron images and STXM images show grain domain structure in the ab plane with a characteristic grain domain size of approximately 50 μm. X-ray absorption microscopy in the STXM mode obtained at the Ti L 2,3 edge shows that the titanium in the superlattices is present as both octahedral Ti consistent with the TiSe 2 structure and metallic Ti. A comparison of the data obtained from these techniques highlights chemical information, which can be deduced on a submicrometer range from the space resolved spectra obtained using STXM. copyright 1997 American Institute of Physics

  11. Protected areas in mountains

    Directory of Open Access Journals (Sweden)

    Hamilton, L. S.

    2006-12-01

    Full Text Available

    The importance of a global Protected Areas Network in sustaining appropriate mountain development is presented in this paper. Present status of the world’s “official” Protected Areas in the UN List, and the proportion that are in mountain areas, and including international designations (World Heritage and Biosphere Reserves. Current and future challenges in the management of these special areas are also commented.



    El autor destaca la importancia de una Red Mundial de Espacios Protegidos para el desarrollo sostenible de las montañas. Comenta luego el estatus actual de las Áreas Protegidas “oficiales” del Mundo en la Lista de las Naciones Unidas y qué proporción de ellas forma parte de las montañas, sin olvidar las figuras internacionales de protección como Patrimonio de la Humanidad y Reservas de Biosfera. Para terminar, se discuten los problemas de gestión actuales y futuros de estas áreas tan especiales

  12. Superconductivity in the ferecrystals (PbSe){sub 1.14}(NbSe{sub 2}){sub n}

    Energy Technology Data Exchange (ETDEWEB)

    Grosse, Corinna; Chiatti, Olivio; Fischer, Saskia F. [Novel Materials Group, Humboldt-Universitaet Berlin (Germany); Alemayehu, Matti B.; Falmbigl, Matthias; Johnson, David C. [Department of Chemistry, University of Oregon, Eugene, OR (United States)

    2016-07-01

    The ferecrystals (PbSe){sub 1.14}(NbSe{sub 2}){sub n} are artificially layered materials consisting of n NbSe{sub 2} single-layers stacked alternately with atomic double layers of PbSe. NbSe{sub 2} is a transition metal dichalcogenide with interesting electrical properties such as superconductivity and charge density waves. The influence of turbostratic disorder, a random rotation between the NbSe{sub 2} and PbSe layers, on the superconducting transition temperature has been unknown so far. We investigate the structural and temperature-dependent electrical properties of the ferecrystals (PbSe){sub 1.14}(NbSe{sub 2}){sub n} by means of scanning transmission electron microscopy, X-ray diffraction, in-plane resistivity and Hall measurements and compare them to those of analogous non-disordered misfit layer compound (MLC) polymorphs. We observe a superconducting transition in the resistivity of the ferecrystals. The transition temperatures are reduced by up to 55 % with respect to the analogous MLC polymorphs. This indicates that turbostratic disorder substantially weakens the electron-phonon coupling in (PbSe){sub 1.14}(NbSe{sub 2}){sub n}. We discuss the results of the structural and electrical properties of the ferecrystals with respect to their MLC analogues and also with respect to ultra-thin NbSe{sub 2} layers.

  13. Direct solution-phase synthesis of Se submicrotubes using Se powder as selenium source

    International Nuclear Information System (INIS)

    Yan Shancheng; Wang Haitao; Zhang Yuping; Li Shuchun; Xiao Zhongdang

    2009-01-01

    The selenium submicrotubes were directly prepared using Se powder as selenium source by microwave-assisted method. Field-emission scan electron microscopy (FESEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD) were adopted to characterize the as-prepared products. The results of high-resolution transmission electron microscopy (HRTEM) and XRD pattern proved that the selenium submicrotubes were single crystalline in nature and [0 0 1] oriented. A possible growth mechanism of the selenium submicrotubes was proposed. The effects of the experimental conditions, such as alkaline concentration and solvent properties, on the morphology and dimension of the products have also been discussed

  14. Complexing in (NH4)2SeO4-UO2SeO4 H2O system

    International Nuclear Information System (INIS)

    Serezhkina, L.B.

    1994-01-01

    Isotherm of solubility in the (NH 4 ) 2 SeO 4 -UO 2 SeO 4 -H 2 O system has been constructed at 25 deg C. (NH 4 ) 2 (UO 2 ) 2 (SeO 4 ) 3 x6H 2 O formation is established for the first time and certain its physicochemical properties are determined. Regularities of complexing in the R 2 Se) 4 -UO 2 SeO 4 -H 2 O systems, where R-univalent cation are under discussion. 6 refs.; 3 tabs

  15. SeP, ApoER2 and megalin as necessary factors to maintain Se homeostasis in mammals.

    Science.gov (United States)

    Krol, Magdalena Beata; Gromadzinska, Jolanta; Wasowicz, Wojciech

    2012-10-01

    Selenoprotein P (SeP) is an extracellular protein containing ten selenium atoms in the form of selenocysteine, secreted mainly from the liver. About 60% of the whole plasma selenium level is present in SeP, which makes it a useful biomarker of selenium nutritional status. The main functions of SeP are transport and storage of selenium in plasma. It is especially an important protein for the brain, testes and kidneys where the supplementation of the proper amount of Se ensures the synthesis of selenoenzymes with antioxidant properties.Recently, it has been found that SeP uptake in kidneys, testes and brain depends on the apolipoprotein receptor 2 (ApoER2) and lipoprotein megalin receptor (Lrp2). Megalin receptor represents a physiological SeP receptor in kidneys, mediating the re-uptake of secreted SeP from the primary urine. The absence of a functional megalin receptor causes a significant reduction of plasma selenium and the SeP levels as a result of Se excretion. ApoER2 is a SeP receptor in the brain and testes which uptakes Se from the extracellular fluid. Deletion of ApoER2 in mice leads to a lowered selenium level in the brain and testes, neurological dysfunction, production of abnormal spermatozoa, infertility and even death when the subjects are fed a low-selenium diet. Copyright © 2012 Elsevier GmbH. All rights reserved.

  16. Simultaneous tracing of 76Se-selenite and 77Se-selenomethionine by absolute labeling and speciation

    International Nuclear Information System (INIS)

    Suzuki, Kazuo T.; Somekawa, Layla; Kurasaki, Kazuki; Suzuki, Noriyuki

    2006-01-01

    Nutritional selenocompounds are transformed into the assumed common intermediate selenide, which is utilized for the synthesis of selenoenzymes or transformed into methylated metabolites for excretion. Hence, selenocompound metabolites can be traced only with labeled selenium. Here we applied a new tracer method for the metallomics of biometals using simultaneous speciation of each metallome labeled with different homo-elemental isotopes to metabolism and availability of selenium. Rats were depleted of endogenous natural abundance selenium by feeding a single selenium stable isotope ( 82 Se-selenite) and then administered 76 Se-selenite and 77 Se-selenomethionine ( 77 Se-SeMet)simultaneously. Biological samples were subjected to quantification and speciation analysis by HPLC-ICPMS. Metabolites of the labeled 76 Se and 77 Se and interaction with endogenous selenium were traced and examined without interference from the corresponding endogenous natural abundance isotopes. Differences in the distribution and metabolism among organs and between the two nutritional selenocompounds were compared under exactly identical biological and analytical conditions: (1) selenite was distributed more efficiently than SeMet in organs and body fluids except the pancreas. (2) SeMet was taken up by organs in its intact form. (3) Selenium of SeMet origin was distributed selectively in the pancreas and mostly bound to a protein together with intact SeMet. (4) Selenosugars A and B but not trimethylselenonium (TMSe) were detected in the liver. (5) Selenosugar B and TMSe were detected in the kidneys

  17. Synthesis of CdSe Quantum Dots Using Fusarium oxysporum

    Directory of Open Access Journals (Sweden)

    Takaaki Yamaguchi

    2016-10-01

    Full Text Available CdSe quantum dots are often used in industry as fluorescent materials. In this study, CdSe quantum dots were synthesized using Fusarium oxysporum. The cadmium and selenium concentration, pH, and temperature for the culture of F. oxysporum (Fusarium oxysporum were optimized for the synthesis, and the CdSe quantum dots obtained from the mycelial cells of F. oxysporum were observed by transmission electron microscopy. Ultra-thin sections of F. oxysporum showed that the CdSe quantum dots were precipitated in the intracellular space, indicating that cadmium and selenium ions were incorporated into the cell and that the quantum dots were synthesized with intracellular metabolites. To reveal differences in F. oxysporum metabolism, cell extracts of F. oxysporum, before and after CdSe synthesis, were compared using sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE. The results suggested that the amount of superoxide dismutase (SOD decreased after CdSe synthesis. Fluorescence microscopy revealed that cytoplasmic superoxide increased significantly after CdSe synthesis. The accumulation of superoxide may increase the expression of various metabolites that play a role in reducing Se4+ to Se2− and inhibit the aggregation of CdSe to make nanoparticles.

  18. Synthesis of dextran/Se nanocomposites for nanomedicine application

    International Nuclear Information System (INIS)

    Shen Yuhua; Wang Xiufang; Xie Anjian; Huang Lachun; Zhu Jinmiao; Chen Long

    2008-01-01

    In this study, spherical Se nanoparticles were prepared by the reduction of aqueous selenious acid with ice bath through a simple, conventional, and one-step method without the aid of any surfactant, or template. The nanoparticles were characterized by transmission electron microscopy (TEM), photon correlation spectroscopy (PCS), X-ray powder diffraction (XRD), Ultraviolet-visible spectroscopy (UV-vis), Zeta potential, respectively. The results show the Se nanoparticles have good particle dispersion with the average diameters of 36 nm and are amorphous (α-Se). Tablets A and B containing dextran and Se nanoparticles were synthesized with different preparation methods. Se nanoparticles studded equably in the interior and the surface of the tablets, and there are strong interactions between Se and dextran. The release of Se from tablets is investigated in the simulated gastric and intestinal conditions. It is found that the pH environment and different synthetical methods have significant influence on the release rate of Se. The release mechanism of Se nanoparticles is also discussed. The nanocomposites can be applied in controlled releasing of Se nanomedicine

  19. Summary of Synoptic Meteorological Observations. Siberian Coastal Marine Areas. Volume 3. Area 15 - Okhotsk Sea NE, Area 16 - West Coast Kamchatka, Area 17 - Tatar Strait N, Area 18 - Tatar Strait S, Area 19 - Okhotsk Sea SW, Area 20 - Sakhalin Island SE, Area 21 - Okhotsk Sea SE

    Science.gov (United States)

    1975-10-01

    8217 " ■., . "■ ’■<*. PEKIODI IPRIDARY) 1939-197* (OVER-ALL) 1907-197* 1UCUST TtlU 17 ADEl 0016 HtST COAST KtMCHAUA 9A.AN 15J.JE rCT ntQ 0f AIR...8217—■ ■- ^"’"’""ÜIBMÜMIÜlffifattllll i^iuiimb&m<miiM& *J W \\j- \\j PEKIQOI (DVER-4LLI 1961-1974 OCTUBE« TABLE U (CONTI «Kt» 0016 HtST CUA$T ««^CHJTK» S4.1N

  20. Timely resolved measurements on CdSe nanoparticles; Zeitaufgeloeste Messungen an CdSe Nanopartikeln

    Energy Technology Data Exchange (ETDEWEB)

    Holt, B.E. von

    2006-06-06

    By means of infrared spectroscopy the influence of the organic cover on structure and dynamics of CdSe nanoparticles was studied. First a procedure was developed, which allows to get from the static infrared spectrum informations on the quality of the organic cover and the binding behaviour of the ligands. On qualitatively high-grade and well characterized samples thereafter the dynamics of the lowest-energy electron level 1S{sub e} was time-resolvedly meausred in thew visible range. As reference served CdSe TOPO, which was supplemented by samples with the ligands octanthiole, octanic acid, octylamine, naphthoquinone, benzoquinone, and pyridine. The studied nanoparticles had a diameter of 4.86 nm. By means of the excitation-scanning or pump=probe procedure first measurements in the picosecond range were performed. The excitation wavelengths were thereby spectrally confined and so chosen that selectively the transitions 1S{sub 3/2}-1S-e and 1P{sub 3/2}-1P{sub e} but not the intermediately lyingt transition 2S{sub 3/2}-1S{sub e} were excited. The excitation energies were kept so low that the excitation of several excitons in one crystal could be avoided. The scanning wavelength in the infrared corresponded to the energy difference between the electron levels 1S{sub e} and 1P{sub e}. The transients in the picosecond range are marked by a steep increasement of the signal, on which a multi-exponential decay follows. The increasement, which reproduces the popiulation of the excited state, isa inependent on the choice of the ligands. The influence of the organic cover is first visible in the different decay times of the excited electron levels. the decay of the measurement signal of CdSe TOPO can be approximatively described by three time constants: a decay constant in the early picosecond region, a time constant around hundert picoseconds, and a time constant of some nanoseconds. At increasing scanning wavelength the decay constants become longer. By directed excitation

  1. Negative ion photoelectron spectroscopy of SeO-

    International Nuclear Information System (INIS)

    Coe, J.V.; Snodgrass, J.T.; Freidhoff, C.B.; McHugh, K.M.; Bowen, K.H.

    1985-01-01

    Negative ion photoelectron spectroscopy (NIPES) involves a kinetic energy analysis of electrons which are photodetached when a mass selected beam of negative ions is crossed with a fixed frequency laser beam. The photodetachment spectra of SeO - displays transitions from the X 2 PI state of SeO - to both the X 3 Σ - and a 1 Δ states of SeO. The singlet-triplet splitting of SeO is readily observable since selection rules regarding spin do not apply in the bound to free state process of photodetachment. The electron affinity of SeO and the negative ion potential parameters of SeO - have been determined

  2. PySE: Software for extracting sources from radio images

    Science.gov (United States)

    Carbone, D.; Garsden, H.; Spreeuw, H.; Swinbank, J. D.; van der Horst, A. J.; Rowlinson, A.; Broderick, J. W.; Rol, E.; Law, C.; Molenaar, G.; Wijers, R. A. M. J.

    2018-04-01

    PySE is a Python software package for finding and measuring sources in radio telescope images. The software was designed to detect sources in the LOFAR telescope images, but can be used with images from other radio telescopes as well. We introduce the LOFAR Telescope, the context within which PySE was developed, the design of PySE, and describe how it is used. Detailed experiments on the validation and testing of PySE are then presented, along with results of performance testing. We discuss some of the current issues with the algorithms implemented in PySE and their interaction with LOFAR images, concluding with the current status of PySE and its future development.

  3. Atomic Defects and Doping of Monolayer NbSe2.

    Science.gov (United States)

    Nguyen, Lan; Komsa, Hannu-Pekka; Khestanova, Ekaterina; Kashtiban, Reza J; Peters, Jonathan J P; Lawlor, Sean; Sanchez, Ana M; Sloan, Jeremy; Gorbachev, Roman V; Grigorieva, Irina V; Krasheninnikov, Arkady V; Haigh, Sarah J

    2017-03-28

    We have investigated the structure of atomic defects within monolayer NbSe 2 encapsulated in graphene by combining atomic resolution transmission electron microscope imaging, density functional theory (DFT) calculations, and strain mapping using geometric phase analysis. We demonstrate the presence of stable Nb and Se monovacancies in monolayer material and reveal that Se monovacancies are the most frequently observed defects, consistent with DFT calculations of their formation energy. We reveal that adventitious impurities of C, N, and O can substitute into the NbSe 2 lattice stabilizing Se divacancies. We further observe evidence of Pt substitution into both Se and Nb vacancy sites. This knowledge of the character and relative frequency of different atomic defects provides the potential to better understand and control the unusual electronic and magnetic properties of this exciting two-dimensional material.

  4. Symmetry and optical anisotropy in CdSe/ZnSe quantum dots

    Energy Technology Data Exchange (ETDEWEB)

    Kiessling, Tobias

    2009-10-29

    The material system of choice for the investigations performed in the frame of this Thesis were self-assembled CdSe/ZnSe QDs. The reason for this choice is twofold. First, CdSe/ZnSe QDs can be grown with excellent optical quality, which is a prerequiste for optical studies. Second, due to the polar nature of II-VI compound semiconductors, optical anisotropies induced by various asymmetries are more pronounced than in their IIIV or element IV counterparts. Unlike in the III-V materials, where the self-organization of QDs is well described by the Stranski-Krastanow growth mode, the peculiarities of the QD formation are not entirely clear in II-VI alloys. For the purposes of the current work QDs emerging from two variants of Molecular Beam Epitaxy (MBE) growth were studied. In order to establish a clear connection between the optically observed anisotropies and the growth induced asymmetries in the QDs we start out by summarizing all available structural and morphological studies that were performed on the resultant QDs, including x-ray diffraction, atomic force microscopy, high resolution transmission electron microscopy and resonant Raman scattering. Extensive investigations by Photoluminescence (PL) and Photoluminescence Excitation (PLE) spectroscopy hence detail the resultant electronic structure of excitons confined to the above QDs as well as their energy relaxation across the latter. We find that for these small-sized strongly confining QDs k-vector conservation is entirely relaxed, which enables interaction of the excitons with a continuum of phonons and explains fast and efficient exciton capture by the QDs, even for excitation conditions far above the ground state. We demonstrate how this provides an alternative fast relaxation channel to Auger-like electron-hole scattering, that may also explain fast hole relaxation and adds to the understanding of the absence of a phonon bottleneck in the energy relaxation in these type of QDs. With the above analysis as a

  5. Symmetry and optical anisotropy in CdSe/ZnSe quantum dots

    International Nuclear Information System (INIS)

    Kiessling, Tobias

    2009-01-01

    The material system of choice for the investigations performed in the frame of this Thesis were self-assembled CdSe/ZnSe QDs. The reason for this choice is twofold. First, CdSe/ZnSe QDs can be grown with excellent optical quality, which is a prerequiste for optical studies. Second, due to the polar nature of II-VI compound semiconductors, optical anisotropies induced by various asymmetries are more pronounced than in their IIIV or element IV counterparts. Unlike in the III-V materials, where the self-organization of QDs is well described by the Stranski-Krastanow growth mode, the peculiarities of the QD formation are not entirely clear in II-VI alloys. For the purposes of the current work QDs emerging from two variants of Molecular Beam Epitaxy (MBE) growth were studied. In order to establish a clear connection between the optically observed anisotropies and the growth induced asymmetries in the QDs we start out by summarizing all available structural and morphological studies that were performed on the resultant QDs, including x-ray diffraction, atomic force microscopy, high resolution transmission electron microscopy and resonant Raman scattering. Extensive investigations by Photoluminescence (PL) and Photoluminescence Excitation (PLE) spectroscopy hence detail the resultant electronic structure of excitons confined to the above QDs as well as their energy relaxation across the latter. We find that for these small-sized strongly confining QDs k-vector conservation is entirely relaxed, which enables interaction of the excitons with a continuum of phonons and explains fast and efficient exciton capture by the QDs, even for excitation conditions far above the ground state. We demonstrate how this provides an alternative fast relaxation channel to Auger-like electron-hole scattering, that may also explain fast hole relaxation and adds to the understanding of the absence of a phonon bottleneck in the energy relaxation in these type of QDs. With the above analysis as a

  6. Effect of Silver Doping on Transport Properties of Bi2Se3: AgxBi2Se3 and Bi2-xAgxSe3

    Science.gov (United States)

    Zhang, Min; Wei, Zhan-Tao

    2018-05-01

    Ag-doped Bi2Se3 with the formula AgxBi2Se3 and Bi2-xAgxSe3 were prepared and their electrical and magnetic transport properties have been investigated to study the influence of silver doping on transport properties of Bi2Se3 with different Ag-doped method. All samples exhibited metallic resistivity and the resistivity increased with increasing Ag concentration. The lattice parameter c of Ag-substituted and Ag-intercalated samples displays a contrary change as the Ag concentration increased. For the Ag-intercalated samples, both the resistance upturn were observed in the curves of temperature dependent of resistivity and temperature dependent of magnetoresistance, respectively, indicating that the enhanced surface effect was obtained in those samples. Monotonously, field-induced MR peaks around 200 K were also observed in those samples. Similar behaviors were not observed in the Ag-substituted samples.

  7. Effect of Silver Doping on Transport Properties of Bi2Se3: AgxBi2Se3 and Bi2-xAgxSe3

    Science.gov (United States)

    Zhang, Min; Wei, Zhan-Tao

    2018-03-01

    Ag-doped Bi2Se3 with the formula AgxBi2Se3 and Bi2-xAgxSe3 were prepared and their electrical and magnetic transport properties have been investigated to study the influence of silver doping on transport properties of Bi2Se3 with different Ag-doped method. All samples exhibited metallic resistivity and the resistivity increased with increasing Ag concentration. The lattice parameter c of Ag-substituted and Ag-intercalated samples displays a contrary change as the Ag concentration increased. For the Ag-intercalated samples, both the resistance upturn were observed in the curves of temperature dependent of resistivity and temperature dependent of magnetoresistance, respectively, indicating that the enhanced surface effect was obtained in those samples. Monotonously, field-induced MR peaks around 200 K were also observed in those samples. Similar behaviors were not observed in the Ag-substituted samples.

  8. SeRLoc: Robust Localization for Wireless Sensor Networks

    National Research Council Canada - National Science Library

    Lazos, Loukas; Poovendran, Radha

    2005-01-01

    .... We show that SeRLoc is robust against known attacks on WSNs such as the wormhole attack, the Sybil attack, and compromise of network entities and analytically compute the probability of success for each attack. We also compare the performance of SeRLoc with state-of-the-art range-independent localization schemes and show that SeRLoc has better performance.

  9. Atomic defects and doping of monolayer NbSe2

    OpenAIRE

    Nguyen, Lan; Komsa, Hannu-Pekka; Khestanova, Ekaterina; Kashtiban, Reza J; Peters, Jonathan J.P.; Lawlor, Sean; Sanchez, Ana M.; Sloan, Jeremy; Gorbachev, Roman; Grigorieva, Irina; Krasheninnikov, Arkady V.; Haigh, Sarah

    2017-01-01

    We have investigated the structure of atomic defects within monolayer NbSe2 encapsulated in graphene by combining atomic resolution transmission electron microscope imaging, density functional theory (DFT) calculations, and strain mapping using geometric phase analysis. We demonstrate the presence of stable Nb and Se monovacancies in monolayer material and reveal that Se monovacancies are the most frequently observed defects, consistent with DFT calculations of their formation energy. We reve...

  10. Enhanced thermoelectric properties of N-type polycrystalline In4Se3-x compounds via thermally induced Se deficiency

    Science.gov (United States)

    Zhao, Ran; Shu, Yu-Tian; Guo, Fu

    2014-03-01

    In4Se3-x compound is considered as a potential thermoelectric material due to its comparably low thermal conductivity among all existing ones. While most studies investigated In4Se3-x thermoelectric properties by controlling selennium or other dopants concentrations, in the current study, it was found that even for a fixed initial In/Se ratio, the resulting In/Se ratio varied significantly with different thermal processing histories (i.e., melting and annealing), which also resulted in varied thermoelectric properties as well as fracture surface morphologies of In4Se3-x polycrystalline specimens. Single phase polycrystalline In4Se3-x compounds were synthesized by combining a sequence of melting, annealing, pulverizing, and spark plasma sintering. The extension of previous thermal history was observed to significantly improve the electrical conductivity (about 121%) and figure of merit (about 53%) of In4Se3-x polycrystalline compounds. The extended thermal history resulted in the increase of Se deficiency (x) from 0.39 to 0.53. This thermally induced Se deficiency was observed to associate with increasing carrier mobility but decreasing concentration, which differs from the general trend observed for the initially adjusted Se deficiency at room temperature. Unusually large dispersed grains with nanosize layers were observed in specimens with the longest thermal history. The mechanism(s) by which previous thermal processing enhances carrier mobility and affect microstructural evolution are briefly discussed.

  11. Structural and optical properties of nanocrystalline CdSe and Al:CdSe thin films for photoelectrochemical application

    Energy Technology Data Exchange (ETDEWEB)

    Gawali, Sanjay A. [Electrochemical Materials Laboratory, Department of Physics, Shivaji University, Kolhapur - 416 004 (India); Bhosale, C.H., E-mail: bhosale_ch@yahoo.com [Electrochemical Materials Laboratory, Department of Physics, Shivaji University, Kolhapur - 416 004 (India)

    2011-10-03

    Highlights: {yields} The CdSe and Al:CdSe thin films have been successfully deposited by SPT. {yields} Hexagonal cubic structured CdSe and Al: CdSe thin films are observed. {yields} Large number of fine grains, Uniform and compact growth morphology. {yields} Hydrophilic surface nature. {yields} Al:CdSe have better PEC performance than CdSe. - Abstract: Nanocrystalline CdSe and Al:CdSe semiconductor thin films have been successfully synthesized onto amorphous and FTO glass substrates by spray pyrolysis technique. Aqueous solutions containing precursors of Cd and Se have been used to obtain good quality films. The optimized films have been characterized for their structural, morphological, wettability and optical properties. X-ray diffraction (XRD) studies show that the films are polycrystalline in nature with hexagonal crystal structure. Scanning electron microscopy (SEM) studies show that the film surface is smooth, uniform and compact in nature. Water wettability study reveals that the films are hydrophilic behavior. The formation of CdSe and Al:CdSe thin film were confirmed with the help of FTIR spectroscopy. UV-vis spectrophotometric measurement showed a direct allowed band gap lying in the range 1.673-1.87 eV. Output characteristics were studied by using cell configuration n- CdSe/Al:CdSe |1 M (NaOH + Na{sub 2} + S)|C. An efficient solar cell having a power conversion efficiency of 0.38% at illumination 25 mW cm{sup -2} was fabricated.

  12. 13.7%-efficient Zn(Se,OH){sub x}/Cu(In,Ga)(S,Se){sub 2} thin-film solar cell

    Energy Technology Data Exchange (ETDEWEB)

    Ennaoui, A. [Hahn-Meitner-Institut, Bereich Physikalische Chemie, Berlin (Germany); Blieske, U.; Lux-Steiner, M.Ch. [Hahn-Meitner-Institut, Bereich Festkoerperphysik, Berlin (Germany)

    1998-12-01

    Cu(In,Ga)Se{sub 2} (CIGS) and related semiconducting compounds have demonstrated their high potential for high-efficiency thin-film solar cells. The highest efficiency for CIGS based thin-film solar cells has been achieved with CdS buffer layers prepared by a solution growth method known as chemical based deposition (CBD). With the aim of developing Cd-free chalcopyrite-based thin-film solar cells, Zn(Se,OH){sub x} buffer layers were deposited by CBD on polycrystalline Cu(In,Ga)(S,Se){sub 2} (CIGSS). A total-area conversion efficiency of 13.7% was certified by the Fraunhofer Institute for Solar Energy Systems. The CIGSS absorber was fabricated by Siemens Solar Industries (California). For device optimisation, the thickness and good surface coverage were controlled by XPS-UPS photoemission spectroscopy. A Zn(Se,OH){sub x} thickness below 7 nm has been found to be optimum for achieving a homogeneous and compact buffer film on CIGSS, with open-circuit photovoltage V{sub oc} = 535 mV, fill factor FF = 70.76% and a high short-circuit photocurrent density J{sub sc} 36.1 mA cm{sup -2}. (Author)

  13. Cultivation and characterization of GaInSe2 crystals

    International Nuclear Information System (INIS)

    Panakhov, T.M.; Kafarova, D.M.

    2013-01-01

    This work is the first systematic study devoted to the growth of GaInSe 2 crystals and their characterization by experimental methods such as X-ray diffraction, electron microscopy transmission with high resolution, sample electron diffraction. By the method of photoelectron roentgen spectroscopy it was studied the chemical structure of the GaInSe 2 crystals and the microprobe analysis indicated that the individual crystals have an excess of gallium. GaInSe 2 crystals were grown by the Bridgman method. Samples were prepared as single crystals by the Bridgman method. Studies showed that the GaInSe 2 crystals are hexagonal ones

  14. Epitaxial CdSe-Au nanocrystal heterostructures by thermal annealing.

    Science.gov (United States)

    Figuerola, Albert; van Huis, Marijn; Zanella, Marco; Genovese, Alessandro; Marras, Sergio; Falqui, Andrea; Zandbergen, Henny W; Cingolani, Roberto; Manna, Liberato

    2010-08-11

    The thermal evolution of a collection of heterogeneous CdSe-Au nanosystems (Au-decorated CdSe nanorods, networks, vertical assemblies) prepared by wet-chemical approaches was monitored in situ in the transmission electron microscope. In contrast to interfaces that are formed during kinetically controlled wet chemical synthesis, heating under vacuum conditions results in distinct and well-defined CdSe/Au interfaces, located at the CdSe polar surfaces. The high quality of these interfaces should make the heterostructures more suitable for use in nanoscale electronic devices.

  15. ¿Como se hace publicidad por internet?

    Directory of Open Access Journals (Sweden)

    Franz Del Pozo

    2015-01-01

    Full Text Available Internet es el medio de comunicación y venta con el mayor potencial de crecimiento y efectividad al más bajo precio. Para vender se usan tarjetas de crédito, depósitos bancarios, franqueo, comercio electrónico. Explica qué y cómo se hace publicidad por Internet. La Red se usa para difundir y para vender y hay la posibilidad de hacer algo diferente a más de llegar directamente al público objetivo se interactúa con él.

  16. Determination of K shell fluorescence cross-section and Kβ/Kα intensity ratios for Fe, Se, Te, FeSe, FeTe and TeSe

    International Nuclear Information System (INIS)

    Saydam, M.; Aksoy, C.; Cengiz, E.; Alaşalvar, C.; Tıraşoğlu, E.; Apaydın, G.

    2012-01-01

    The fluorescence cross-sections (σ Ki ) and the intensity ratios K β /K α for pure Fe, Se, Te elements and FeSe, FeTe, TeSe complexes have been investigated. The samples were excited by 59.5 keV γ-rays from 241 Am annular radioactive source and emitted X-rays. They were counted by an Ultra-LEGe detector with resolution of 150 eV at 5.9 keV. For pure elements results have been compared with the theoretical calculated values. According to our results band length and mutual interaction of atoms affected the results. We claimed that these effects would help researchers who study on superconductors, especially determining which compound can be show the superconductor properties. - Highlights: ► TeSe, FeSe and FeTe complexes have affected each other in terms of charge transfer. ► Fe excitement and enhancement have been made by Se and Te. ► Attractive interactions between electrons can help to becoming superconductivity.

  17. Hot exciton relaxation in multiple layers CdSe/ZnSe self-assembled quantum dots separated by thick ZnSe barriers

    International Nuclear Information System (INIS)

    Eremenko, M; Budkin, G; Reznitsky, A

    2015-01-01

    We have studied PL and PLE spectra of two samples (A and B) of MBE grown CdSe/ZnSe asymmetric double quantum wells with different amount of deposited CdSe layers separated by 14 nm ZnSe barrier. It has been found that PLE spectra of the states forming short wavelength side of the PL spectra of both deep and shallow QWs of the sample A as well as that of deep QW of the sample B demonstrate oscillating structure in the spectral ranges corresponding to exciton states of self-assembled quantum dots only. Meanwhile PLE spectra of the short wavelength states of shallow QW the sample B revealed pronounced oscillating structure with energy period of ZnSe LO phonon under excitation with photons in a wide energy range both in the regions of quantum-dot states and in that of free states in the ZnSe barrier. In these spectra creating of excitons with kinetic energies more than 0.3 eV was observed which considerably exceed the exciton binding energy as well as LO phonon energy (both appr. 0.03 eV). It has been concluded that oscillating structure of the PLE spectra arises due to cascade relaxation of hot excitons. We discuss the model which explains these experimental findings. (paper)

  18. Hot exciton relaxation in multiple layers CdSe/ZnSe self-assembled quantum dots separated by thick ZnSe barriers

    Science.gov (United States)

    Eremenko, M.; Budkin, G.; Reznitsky, A.

    2015-11-01

    We have studied PL and PLE spectra of two samples (A and B) of MBE grown CdSe/ZnSe asymmetric double quantum wells with different amount of deposited CdSe layers separated by 14 nm ZnSe barrier. It has been found that PLE spectra of the states forming short wavelength side of the PL spectra of both deep and shallow QWs of the sample A as well as that of deep QW of the sample B demonstrate oscillating structure in the spectral ranges corresponding to exciton states of self-assembled quantum dots only. Meanwhile PLE spectra of the short wavelength states of shallow QW the sample B revealed pronounced oscillating structure with energy period of ZnSe LO phonon under excitation with photons in a wide energy range both in the regions of quantum-dot states and in that of free states in the ZnSe barrier. In these spectra creating of excitons with kinetic energies more than 0.3 eV was observed which considerably exceed the exciton binding energy as well as LO phonon energy (both appr. 0.03 eV). It has been concluded that oscillating structure of the PLE spectra arises due to cascade relaxation of hot excitons. We discuss the model which explains these experimental findings.

  19. Rainfall erosivity in the Upper Llobregat Basin, SE Pyrenees

    Directory of Open Access Journals (Sweden)

    Gallart, F.

    2010-12-01

    Full Text Available The aim of this study was to determine the spatial distribution of rainfall erosivity in a 504 km2 river basin in Eastern Pyrenees and assess its uncertainties. The study area is topographically complex and is dominated by Mediterranean climate with intense rains during summer. Available rainfall dataset includes 14 years spanning from 1991 to 2004 at daily resolution from seven weather stations and sub-hourly from one station. Daily R values were calculated from sub-hourly data, and then by using the relationship between daily R values and precipitation, the R values for weather stations having only daily rainfall resolution were calculated. The error propagation by using such upscaling approach was analyzed. The studied sources of uncertainty of R factor at annual scale were: the use of the relationship between daily R values and precipitation, the temporal averaging of R values and spatial variation. Results have shown that at annual scale the temporal averaging was the largest contributor of uncertainty (70%; however this contribution decreased significantly (14% when R was estimated for the long term.

    El objetivo de este estudio fue determinar la distribución espacial de la erosividad de precipitación en una cuenca de 504 km2 en el Este de los Pirineos y evaluar sus incertidumbres. El área de estudio presenta una topografía compleja y está dominada por un clima Mediterráneo con lluvias intensas durante el verano. Los datos de precipitación utilizados abarcan 14 años, desde 1991 hasta 2004, a una resolución diaria en siete estaciones meteorológicas y minutal en una estación. Los valores diarios de R se calcularon a partir de datos con resolución minutal, y luego se estableció una relación entre valores diarios de R y precipitación, con el fin de calcular los valores de R para las estaciones meteorológicas que sólo presentan resolución diaria. Las fuentes de incertidumbre considerados para el

  20. Stable and metastable equilibria in PbSe + SnI2=SnSe + PbI2

    International Nuclear Information System (INIS)

    Odin, I.N.; Grin'ko, V.V.; Kozlovskij, V.F.; Demidova, E.D.

    2003-01-01

    T-x-y phase diagrams of the PbSe + SnI 2 =SnSe + PbI 2 mutual system (stable states) are plotted for the first time. It is shown that melt, solid solutions on the base of components of the mutual system and phase on the base of Sn 2 SeI 4 take part in phase equilibria. Transformations in the PbSe + SnI 2 =SnSe + PbI 2 mutual system leading to crystallization of metastable polytype modifications of lead iodides and metastable ternary compound forming in PbSe-PbI 2 system are investigated for the first time [ru

  1. Electronic structure and superconductivity of FeSe-related superconductors.

    Science.gov (United States)

    Liu, Xu; Zhao, Lin; He, Shaolong; He, Junfeng; Liu, Defa; Mou, Daixiang; Shen, Bing; Hu, Yong; Huang, Jianwei; Zhou, X J

    2015-05-13

    FeSe superconductors and their related systems have attracted much attention in the study of iron-based superconductors owing to their simple crystal structure and peculiar electronic and physical properties. The bulk FeSe superconductor has a superconducting transition temperature (Tc) of ~8 K and it can be dramatically enhanced to 37 K at high pressure. On the other hand, its cousin system, FeTe, possesses a unique antiferromagnetic ground state but is non-superconducting. Substitution of Se with Te in the FeSe superconductor results in an enhancement of Tc up to 14.5 K and superconductivity can persist over a large composition range in the Fe(Se,Te) system. Intercalation of the FeSe superconductor leads to the discovery of the AxFe2-ySe2 (A = K, Cs and Tl) system that exhibits a Tc higher than 30 K and a unique electronic structure of the superconducting phase. A recent report of possible high temperature superconductivity in single-layer FeSe/SrTiO3 films with a Tc above 65 K has generated much excitement in the community. This pioneering work opens a door for interface superconductivity to explore for high Tc superconductors. The distinct electronic structure and superconducting gap, layer-dependent behavior and insulator-superconductor transition of the FeSe/SrTiO3 films provide critical information in understanding the superconductivity mechanism of iron-based superconductors. In this paper, we present a brief review of the investigation of the electronic structure and superconductivity of the FeSe superconductor and related systems, with a particular focus on the FeSe films.

  2. Transport Properties of ZnSe- ITO Hetero Junction

    Science.gov (United States)

    Ichibakase, Tsuyoshi

    In this report, ITO(Indium Tin Oxide) was used on the glass substrates as the transparent electrode, and ZnSe layer was prepared by the vacuum deposition on this ITO. Then, the electrical characteristics of this sample were investigated by mans of the electric current transport analysis. The sample that ZnSe was prepared as 3.4 μm in case of ITO-ZnSe sample, has high density level at the junction surface. The ITO-ZnSe junction has two type of diffusion current. However, the ITO-ZnSe sample that ZnSe layer was prepared as 0.1 μm can be assumed as the ohmic contact, and ITO-ZnSe(0.1μm) -CdTe sample shows the avalanche breakdown, and it is considered that the avalanche breakdown occurs in CdTe layer. It is difficult to occur the avalanche breakdown, if ZnSe-CdTe junction has high-density level and CdTe layer has high-density defect. Hence, the ZnSe-CdTe sample that CdTe layer was prepared on ITO-ZnSe(0.1μm) substrate has not high-density level at the junction surface, and the CdTe layer with little lattice imperfection can be prepared. It found that ITO-ZnSe(0.1μm) substrate is available for the II-VI compounds semiconductor device through above analysis result.

  3. 79Se: geochemical and crystallo-chemical retardation mechanisms

    International Nuclear Information System (INIS)

    Chen, F.; Ewing, R.C.

    1999-01-01

    79 Se is a long-lived (1.1 x 10 6 yrs) fission product which is chemically and radiologically toxic. Under Eh-pH conditions typical of oxidative alteration of spent nuclear fuel, selenite, SeO 3 2- or HSeO 3 - or selenate, SeO 4 2- , are the dominant aqueous species of selenium. Because of the high solubility of metal-selenites and metal-selenates and the low adsorption of selenite and selenate aqueous species by geological materials under alkaline conditions, selenium may be highly mobile. However, 79 Se released from altered fuel may become immobilized by incorporation into secondary uranyl phases as low concentration impurities, and this may significantly reduce the mobility of selenium. Analysis and comparison of the known structures of uranyl phases indicate that (SeO 3 ) may substitute for (SiO 3 OH) in structures of α-uranophane and boltwoodite that are expected to be the dominant alteration products of UO 2 in Si-rich groundwater. The substitutions (SeO 3 ) (SiO 3 OH) in sklodowskite, Mg[(UO 2 )(SiO 3 OH)] 2 (H 2 O) 6 and (SeO 3 ) (PO 4 ) in phurcalite, Ca 2 [(UO 2 ) 3 (PO 4 ) 2 O 2 ](H 2 O) 7 , may occur with the eliminated apical anion being substituted for by an H 2 O group, but experimental investigation is required. The close similarity between the sheets in the structures of rutherfordine, [(UO 2 )(CO 3 )] and [(UO 2 )(SeO 3 )] implies that the substitution (SeO 3 ) (CO 3 ) can occur in rutherfordine, and possibly other uranyl carbonates. However, the substitutions: (SeO 3 ) (SiO 4 ) in soddyite and (SeO 3 ) (PO 4 ) in phosphuranylite may disrupt their structural connectivity and are, therefore, unlikely. (orig.)

  4. The MgSeO4-UO2SeO4-H2O system at 25 deg C

    International Nuclear Information System (INIS)

    Serezhkina, L.B.; Serezhkin, V.N.

    1984-01-01

    The method of isothermal solubility at 25 deg C has been used to study MgSeO 4 -UO 2 SeO 4 -H 2 O system. Formation of the new compound Mg 2 (UO 2 ) 3 (SeO 4 ) 5 X32H 2 O, congruently soluble in water is stated. Thermographic and X-ray diffraction investigations of the prepared magnesium selenato-uranylate and products of its dehydration are conducted

  5. XPS, TEM and NRA investigations of Zn(Se,OH)/Zn(OH){sub 2} films on Cu(In,Ga)(S,Se){sub 2} substrates for highly efficient solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Eisele, W.; Ennaoui, A.; Schubert-Bischoff, P.; Giersig, M.; Pettenkofer, C.; Krauser, J.; Lux-Steiner, M. [Hahn-Meitner Inst., Berlin (Germany); Zweigart, S.; Karg, F. [Siemens and Shell Solar, Munich (Germany)

    2003-01-01

    Structural and compositional properties of Zn(Se,OH)/Zn(OH){sub 2} buffer layers deposited by chemical bath deposition(CBD) on Cu(In,Ga)(S,Se){sub 2} (CIGSS) absorbers are investigated. Due to the aqueous nature of the CBD process, oxygen and hydrogen were incorporated into the 'ZnSe' buffer layer mainly in the form of Zn(OH){sub 2} as is shown by X-ray photoelectron spectroscopy and nuclear reaction analysis (NRA) measurements leading to the nomenclature 'Zn(Se,OH)'. Prior to the deposition of Zn(Se,OH), a zinc treatment of the absorber was performed. During that treatment a layer mainly consisting of Zn(OH){sub 2} grew to a thickness of several nanometer. The whole buffer layer therefore consists of a Zn(Se,OH)/Zn(OH){sub 2} structure on CIGSS. Part of the Zn(OH){sub 2} in both layers (i.e. the Zn(Se,OH) and the Zn(OH){sub 2} layer) might be converted into ZnO during measurements or storage. Scanning electron microscopy pictures showed that a complete coverage of the absorber with the buffer layer was achieved. Transmission electron microscopy revealed the different regions of the buffer layer: An amorphous area (possibly Zn(OH){sub 2}) and a partly nanocrystalline area, where lattice planes of ZnSe could be identified. Solar cell efficiencies of ZnO/Zn(Se,OH)/Zn(OH){sub 2}/CIGSS devices exceed 14% (total area).(author)

  6. Dynamical properties and their strain-dependence of ZnSe(ZnSe:N: Zinc-blende and wurtzite

    Directory of Open Access Journals (Sweden)

    Dandan Wang

    2014-06-01

    Full Text Available The lattice dynamical properties of ZnSe and ZnSe with substitutional N incorporation(ZnSe:N are investigated in both the zinc-blend(ZB and wurtzite(WZ structures using first-principles calculations. The optical phonon modes of ZB-ZnSe at the Γ-point locate at 250 cm−1 for LO and 213 cm−1 for TO. The characteristic E2 phonon modes at about 50 cm−1 and the E1 and another E2 phonon modes around 200 cm−1 of WZ-ZnSe are suggested to be the fingerprint for distinguishing the two polytypes of ZnSe. For substitutional N incorporated ZnSe, the N incorporation introduces three new high energy modes above 500 cm−1, and the splitting of them is much larger in the WZ phase than that in ZB phase. The strain dependence of phonon frequency which could be useful for corresponding spectroscopic strain characterization are also studied. The simple linear dependence is determined for ZB-ZnSe, while the situation for WZ-ZnSe looks more complicated.

  7. Formation of ZnSe/Bi2Se3 QDs by surface cation exchange and high photothermal conversion

    Directory of Open Access Journals (Sweden)

    Guozhi Jia

    2015-08-01

    Full Text Available Water-dispersed core/shell structure ZnSe/Bi2Se3 quantum dots were synthesized by ultrasonicwave-assisted cation exchange reaction. Only surface Zn ion can be replaced by Bi ion in ZnSe quantum dots, which lead to the ultrathin Bi2Se3 shell layer formed. It is significance to find to change the crystal of QDs due to the acting of ultrasonicwave. Cation exchange mechanism and excellent photothermal conversion properties are discussed in detail.

  8. Heterojunctions formed by annealing of GaSe and InSe layered crystals in zinc vapor

    Directory of Open Access Journals (Sweden)

    Kudrynskyi Z. R.

    2012-12-01

    Full Text Available The article presents a method of creating heterojunc¬tions based on semiconductors with different lattice types. Substrates manufactured from GaSe and InSe layered crystals were annealed in Zn vapor. This way, n-ZnSe–p-GaSe and n-ZnSe–p-InSe heterojunctions were obtained. The obtained heterojunctions are photo¬sensitive in near and infrared spectral regions. This method opens up greate possibilities of producing heterostructures with a desired sensitivity band.

  9. Flexible one-dimensional carbon-selenium composite nanofibers with superior electrochemical performance for Li-Se/Na-Se batteries

    Science.gov (United States)

    Zeng, Linchao; Wei, Xiang; Wang, Jiaqing; Jiang, Yu; Li, Weihan; Yu, Yan

    2015-05-01

    A facile strategy is developed to synthesis selenium/carbon composites (Se@CNFs-CNT) by co-heating Se powder and electrospun Polyacrylonitrile (PAN)-CNT nanofibers at 600°Cin a sealed vessel. The Se molecules are chemically bonded and physical encapsulated by carbonized PAN-CNT composite (CNFs-CNT), which leads to prevent the dissolution of polyselenide intermediates in carbonate based electrolyte. When directly used as flexible free-standing cathode material for Li-Se batteries in low cost carbonate-based electrolyte, the Se@CNFs-CNT electrode exhibits improved cyclability (517 mAh g-1 after 500 cycles at 0.5 A g-1) and rate capability (485 mAh g-1 at 1 A g-1). Moreover, when tested as sodium batteries, it maintains a reversible capacity of 410 mAh g-1 after 240 cycles at 0.5 A g-1. The superior electrochemical performance (especially at high rates) of Se@CNFs-CNT is attributed to synergistic effect of the additive of CNT, the well confine of Se in the CNFs-CNT matrix through chemical bonding and the 3D interconnected carbon nanofibers (CNFs). This simple yet efficient process thus provides a promising route towards fabrication of a variety of high performance flexible Li-Se and Na-Se batteries.

  10. Third-order nonlinear optical properties of GeSe2-Ga2Se3-PbI2 glasses

    International Nuclear Information System (INIS)

    Tang Gao; Liu Cunming; Luo Lan; Chen Wei

    2010-01-01

    The third-order nonlinear optical (NLO) properties of new selenium-based GeSe 2 -Ga 2 Se 3 -PbI 2 glasses have been measured using the optical Kerr effect (OKE) technique, with picosecond and femtosecond laser pulses. The 0.70GeSe 2 -0.15Ga 2 Se 3 -0.15PbI 2 glass has the largest third-order optical nonlinear susceptibility in GeSe 2 -Ga 2 Se 3 -PbI 2 glass system with χ (3) of 5.28x10 12 esu. In addition, the response time of glasses is sub-picosecond, which is predominantly associated with electron cloud. Local structure of the glasses has been identified by using Raman studies, while the origins of the observed nonlinear optical response are discussed. The [Ge(Ga)Se 4 ] tetrahedral and lone-pair electrons from highly polarizable Pb atom in glasses play an important role in enhanced NLO response. These results as well as their good chemical stability indicate that GeSe 2 -Ga 2 Se 3 -PbI 2 glasses are promising materials for photonic applications of third-order nonlinear optical signal processing.

  11. On the reversibility window in binary As-Se glasses

    International Nuclear Information System (INIS)

    Golovchak, R.; Shpotyuk, O.; Kozdras, A.

    2007-01-01

    Physical ageing effects caused by prolonged natural storage are recorded for binary As x Se 1-x glasses with 0.2≤x 2 Se 3 composition, which network is formed by a so-called self-organized phase, possesses the ideal non-ageing ability

  12. Photoelectrochemical (PEC) studies on CdSe thin films ...

    Indian Academy of Sciences (India)

    TECS

    Thin films of CdSe were deposited by potentiostatic mode on different substrates such as ... trodeposited from aqueous acidic baths, but very few ... washed with liquid detergent (labolene) followed by ul- .... increases the ionic mobilities and hence the conductivity ... A PEC cell of configuration, CdSe/1 M polysulphide/.

  13. Preparation of PbSe nanoparticles by electron beam irradiation

    Indian Academy of Sciences (India)

    A novel method has been developed by electron beam irradiation to prepare PbSe nanoparticles. 2 MeV 10mA GJ-2-II electronic accelerator was used as radiation source. Nanocrystalline PbSe was prepared rapidly at room temperature under atmospheric pressure without any kind of toxic reagents. The structure and ...

  14. Origin of low thermal conductivity in SnSe

    Science.gov (United States)

    Xiao, Yu; Chang, Cheng; Pei, Yanling; Wu, Di; Peng, Kunling; Zhou, Xiaoyuan; Gong, Shengkai; He, Jiaqing; Zhang, Yongsheng; Zeng, Zhi; Zhao, Li-Dong

    2016-09-01

    We provide direct evidence to understand the origin of low thermal conductivity of SnSe using elastic measurements. Compared to state-of-the-art lead chalcogenides Pb Q (Q =Te , Se, S), SnSe exhibits low values of sound velocity (˜1420 m /s ) , Young's modulus (E ˜27.7 GPa ) , and shear modulus (G ˜9.6 GPa ) , which are ascribed to the extremely weak Sn-Se atomic interactions (or bonds between layers); meanwhile, the deduced average Grüneisen parameter γ of SnSe is as large as ˜3.13, originating from the strong anharmonicity of the bonding arrangement. The calculated phonon mean free path (l ˜ 0.84 nm) at 300 K is comparable to the lattice parameters of SnSe, indicating little room is left for further reduction of the thermal conductivity through introducing nanoscale microstructures and microscale grain boundaries. The low elastic properties indicate that the weak chemical bonding stiffness of SnSe generally causes phonon modes softening which eventually slows down phonon propagation. This work provides insightful data to understand the low lattice thermal conductivity of SnSe.

  15. Low temperature magnetic structure of MnSe

    Indian Academy of Sciences (India)

    Abstract. In this paper we report low temperature neutron diffraction studies on MnSe in order to understand the anomalous behaviour of their magnetic and transport prop- erties. Our study indicates that at low temperatures MnSe has two coexisting crystal structures, high temperature NaCl and hexagonal NiAs. NiAs phase ...

  16. Thermoelectric Performance of Na-Doped GeSe

    NARCIS (Netherlands)

    Shaabani, Laaya; Aminorroaya-Yamini, Sima; Byrnes, Jacob; Akbar Nezhad, Ali; Blake, Graeme R

    2017-01-01

    Recently, hole-doped GeSe materials have been predicted to exhibit extraordinary thermoelectric performance owing largely to extremely low thermal conductivity. However, experimental research on the thermoelectric properties of GeSe has received less attention. Here, we have synthesized

  17. Wittgenstein og respekten for det religiøse

    DEFF Research Database (Denmark)

    Albinus, Lars

    2006-01-01

    Fremstilling af den tidlige og den sene Wittgensteins forhold til det religiøse med særligt henblik på tabet af umiddelbarhed.......Fremstilling af den tidlige og den sene Wittgensteins forhold til det religiøse med særligt henblik på tabet af umiddelbarhed....

  18. SE-ENRICHMENT OF CARROT AND ONION VIA FOLIAR APPLICATION

    OpenAIRE

    Kapolna, Emese; Laursen, Kristian H.; Hillestrøm, Peter; Husted, Søren; Larsen, Erik H.

    2008-01-01

    The aim of this work was to study the selenium accumulation in carrot and onion plants using foliar application by sodium selenite and sodium selenate. Furthermore, we aimed at identifying the Se species biosynthesised by onion and carrot plants. The results were used to prepare for production of 77Se enriched plants for an ongoing human absorption study.

  19. Structural characterization of vacuum evaporated ZnSe thin films

    Indian Academy of Sciences (India)

    The lattice parameter, grain size, average internal stress, microstrain, dislocation density and degree of pre- ferred orientation in the film are calculated and correlated with Ts. Keywords. ZnSe thin films; X-ray diffraction; average internal stress; microstrain; dislocation density. 1. Introduction. Thin films of ZnSe has attracted ...

  20. Electrochemical preparation and characterization of CuInSe2 thin films for photovoltaic applications

    International Nuclear Information System (INIS)

    Guillen Arqueros, C.

    1992-01-01

    The objective of this work has been to investigate the electrodeposition as a low-cost, large-area fabrication process to obtain CuInSe 2 this films for efficient photovoltaic devices. this objective entails the elucidation of thin film deposition mechanism, the study of the fundamental properties of electrodeposited material, and also the modification of their physical and chemical parameters for photovoltaic applications. CuInSe 2 thin films have been successfully electrodeposited from a citric was characterized by compositional, structural, electrical, optical and electrochemical measurements, relating their properties with the preparation parameters and also studying the effect of various thermal and chemical treatments. The results showed post-deposition treatment are needed for optimizing these films for solar cells fabrication: first, an annealing in inert atmosphere at temperatures above 400 degrees celsius to obtain a high recrystallization in the chalcopyrite structure, and after a chemical etching in KCN solution to remove secondary phases of Cu x Se and Se which are frequently electrodeposited with the CuInSe 2 . The treated samples showed appropriate photovoltaic activity in a semiconductor-electrolite liquid junction. (author) 193 ref

  1. Scintigraphic evaluation of enterogastric reflux using 75Se-HCAT: Methodology and first clinical observations

    International Nuclear Information System (INIS)

    Furno, A.; Sciarretta, G.; Malaguti, P.; Fagioli, G.; Pozzato, R.

    1987-01-01

    The aim of this study was to assess the possibility of detecting enterogastric reflux (EGR) by 75 Se-HCAT cholescintigraphy. The lowest detectable activity in the gastric area at different concentrations of the radiotracer in the gallbladder was preliminary measured both in a plastic phantom and in an in vivo model. Ten patients were studied after a single oral administration of 1480 KBq 75 Se-HCAT. Gamma camera imaging was carried out for five consecutive days during both fasting and after meal ingestion. In our in vivo model an EGR corresponding to 1% of gallbladder content on day one and 8% on day five was detected. In three out of five patients in whom bile was present in the stomach at endoscopy, 75 Se-HCAT cholescintigraphy demonstrated an EGR, while in three out of five patients in whom endoscopy was negative, 75 Se-HCAT cholescintigrahy detected EGR either during fasting or after meal ingestion. As EGR is not constant, Se-HCAT may be a useful tracer of bile to detect EGR over a prolonged period of time and in different physiological conditions. (orig.)

  2. Scintigraphic evaluation of enterogastric reflux using /sup 75/Se-HCAT: Methodology and first clinical observations

    Energy Technology Data Exchange (ETDEWEB)

    Furno, A; Sciarretta, G; Malaguti, P; Fagioli, G; Pozzato, R

    1987-08-01

    The aim of this study was to assess the possibility of detecting enterogastric reflux (EGR) by /sup 75/Se-HCAT cholescintigraphy. The lowest detectable activity in the gastric area at different concentrations of the radiotracer in the gallbladder was preliminary measured both in a plastic phantom and in an in vivo model. Ten patients were studied after a single oral administration of 1480 KBq /sup 75/Se-HCAT. Gamma camera imaging was carried out for five consecutive days during both fasting and after meal ingestion. In our in vivo model an EGR corresponding to 1% of gallbladder content on day one and 8% on day five was detected. In three out of five patients in whom bile was present in the stomach at endoscopy, /sup 75/Se-HCAT cholescintigraphy demonstrated an EGR, while in three out of five patients in whom endoscopy was negative, /sup 75/Se-HCAT cholescintigrahy detected EGR either during fasting or after meal ingestion. As EGR is not constant, Se-HCAT may be a useful tracer of bile to detect EGR over a prolonged period of time and in different physiological conditions.

  3. A Review of SnSe: Growth and Thermoelectric Properties

    Science.gov (United States)

    Nguyen, Van Quang; Kim, Jungdae; Cho, Sunglae

    2018-04-01

    SnSe is a 2D semiconductor with an indirect energy gap of 0.86 - 1 eV; it is widely used in solar cell, optoelectronics, and electronic device applications. Recently, SnSe has been considered as a robust candidate for energy conversion applications due to its high thermoelectric performance ( ZT = 2.6 in p-type and 2.2 in n-type), which is assigned mainly to its anhamornic bonding leading to an ultralow thermal conductivity. In this review, we first discuss the crystalline and electronic structures of SnSe and the source of its p-type characteristic. Then, some typical single crystal and polycrystal growth techniques, as well as an epitaxial thin film growth technique, are outlined. The reported thermoelectric properties of SnSe grown by using each technique are also reviewed. Finally, we will describe some remaining issues concerning the use of SnSe for thermoelectric applications.

  4. Immobilization of Se and U by iron sulfides

    International Nuclear Information System (INIS)

    Kang Mingliang; Ma Bin; Yang Zhuanwei; Liu Chunli; Chen Fanrong

    2014-01-01

    Both uranium and selenium are redox-sensitive, and can occur in several oxidation states. In reducing environments, they exist as insoluble forms. Therefore, reductive precipitation is the most effective way to immobilize U and Se. The interaction of aqueous Se (IV) and uranylwithiron sulfidesweresystematically investigated in light of thermodynamic calculations, X-ray Absorption Spectroscopy (XAS), and X-ray Photoelectron Spectroscopy (XPS). The results from the speciation study revealed that the reduction product was Se (O) when natural pyrite and pyrrhotitereacted with Se (IV), although FeSe 2 is the thermodynamically predicted product from nearly neural to alkaline conditions. This discrepancy is attributed to the oxidizing ability of Se (IV) towards FeSe 2 , of which produce the insoluble Se (0) as the stable product in short-term experiments. In contrast to the thermodynamic calculations, with a reaction product of mixed U (IV) and U (VI) (e.g., U 3 O 8 ), redox reaction was observed only at pH ∼ 8.5 and ∼ 4.5 for U (VI) reduction by nanosized pyrite and natural pyrite, respectively. We proposed that oxidation of pyrite needs an intermediate (e.g., Fe 2+ ), and the reaction between the uranyl and the intermediate is thermodynamically or kinetically limited. Moreover, trace elements generally held within pyrite structure can also greatly influence its reactivity. This study demonstrated that reaction kinetics play a significant role on the reaction product. From a geological time scale, Se and U are likely to be immobilized by iron sulfides via the form of FeSe 2 and UO 2 . (authors)

  5. AgSbSe2 and AgSb(S,Se)2 thin films for photovoltaic applications

    International Nuclear Information System (INIS)

    Garza, J.G.; Shaji, S.; Rodriguez, A.C.; Das Roy, T.K.; Krishnan, B.

    2011-01-01

    Silver antimony selenide (AgSbSe 2 ) thin films were prepared by heating sequentially deposited multilayers of antimony sulphide (Sb 2 S 3 ), silver selenide (Ag 2 Se), selenium (Se) and silver (Ag). Sb 2 S 3 thin film was prepared from a chemical bath containing SbCl 3 and Na 2 S 2 O 3 , Ag 2 Se from a solution containing AgNO 3 and Na 2 SeSO 3 and Se thin films from an acidified solution of Na 2 SeSO 3 , at room temperature on glass substrates. Ag thin film was deposited by thermal evaporation. The annealing temperature was 350 deg. C in vacuum (10 -3 Torr) for 1 h. X-ray diffraction analysis showed that the thin films formed were polycrystalline AgSbSe 2 or AgSb(S,Se) 2 depending on selenium content in the precursor films. Morphology and elemental analysis of these films were done using scanning electron microscopy and energy dispersive X-ray spectroscopy. Optical band gap was evaluated from the UV-visible absorption spectra of these films. Electrical characterizations were done using Hall effect and photocurrent measurements. A photovoltaic structure: glass/ITO/CdS/AgSbSe 2 /Al was formed, in which CdS was deposited by chemical bath deposition. J-V characteristics of this structure showed V oc = 435 mV and J sc = 0.08 mA/cm 2 under illumination using a tungsten halogen lamp. Preparation of a photovoltaic structure using AgSbSe 2 as an absorber material by a non-toxic selenization process is achieved.

  6. Short and medium range structures of 80GeSe2–20Ga2Se3 chalcogenide glasses

    Science.gov (United States)

    Petracovschi, Elena; Calvez, Laurent; Cormier, Laurent; Le Coq, David; Du, Jincheng

    2018-05-01

    The short and medium range structures of 80GeSe2–20Ga2Se3 (or Ge23.5Ga11.8Se64.7) chalcogenide glasses have been studied by combining ab initio molecular dynamics (AIMD) simulations and experimental neutron diffraction studies. The structure factor and total correlation function were calculated from glass structures generated from AIMD simulations and compared with neutron diffraction experiments showing reasonable agreement. The atomic structures of ternary chalcogenide glasses were analyzed in detail, and it was found that gallium atoms are four-fold coordinated by selenium (Se) and form [GaSe4] tetrahedra. Germanium atoms on average also have four-fold coordination, among which Se is 3.5 with the remaining being Ge–Ge homo-nuclear bonds. Ga and Ge tetrahedra link together mainly through corner-sharing and some edge-sharing of Se. No homo-nuclear bonds were observed among Ga atoms or between Ge and Ga. In addition, Se–Se homo-nuclear bonds and Se chains with various lengths were observed. A small fraction of Se atom triclusters that bond to three cations of Ge and Ga were also observed, confirming earlier proposals from 77Se solid state nuclear magnetic resonance studies. Furthermore, the electronic structures of ternary chalcogenide glasses were studied in terms of atomic charge and electronic density of states in order to gain insights into the chemical bonding and electronic properties, as well as to provide an explanation of the observed atomic structures in these ternary chalcogenide glasses.

  7. AgSbSe{sub 2} and AgSb(S,Se){sub 2} thin films for photovoltaic applications

    Energy Technology Data Exchange (ETDEWEB)

    Garza, J.G. [Facultad de Ingenieria Mecanica y Electrica, Universidad Autonoma de Nuevo Leon, San Nicolas de los Garza, Nuevo Leon (Mexico); Shaji, S. [Facultad de Ingenieria Mecanica y Electrica, Universidad Autonoma de Nuevo Leon, San Nicolas de los Garza, Nuevo Leon (Mexico); Facultad de Ingenieria Mecanica y Electrica, CIIDIT - Universidad Autonoma de Nuevo Leon, Apodaca, Nuevo Leon (Mexico); Rodriguez, A.C.; Das Roy, T.K. [Facultad de Ingenieria Mecanica y Electrica, Universidad Autonoma de Nuevo Leon, San Nicolas de los Garza, Nuevo Leon (Mexico); Krishnan, B., E-mail: kbindu_k@yahoo.com [Facultad de Ingenieria Mecanica y Electrica, Universidad Autonoma de Nuevo Leon, San Nicolas de los Garza, Nuevo Leon (Mexico); Facultad de Ingenieria Mecanica y Electrica, CIIDIT - Universidad Autonoma de Nuevo Leon, Apodaca, Nuevo Leon (Mexico)

    2011-10-01

    Silver antimony selenide (AgSbSe{sub 2}) thin films were prepared by heating sequentially deposited multilayers of antimony sulphide (Sb{sub 2}S{sub 3}), silver selenide (Ag{sub 2}Se), selenium (Se) and silver (Ag). Sb{sub 2}S{sub 3} thin film was prepared from a chemical bath containing SbCl{sub 3} and Na{sub 2}S{sub 2}O{sub 3}, Ag{sub 2}Se from a solution containing AgNO{sub 3} and Na{sub 2}SeSO{sub 3} and Se thin films from an acidified solution of Na{sub 2}SeSO{sub 3}, at room temperature on glass substrates. Ag thin film was deposited by thermal evaporation. The annealing temperature was 350 deg. C in vacuum (10{sup -3} Torr) for 1 h. X-ray diffraction analysis showed that the thin films formed were polycrystalline AgSbSe{sub 2} or AgSb(S,Se){sub 2} depending on selenium content in the precursor films. Morphology and elemental analysis of these films were done using scanning electron microscopy and energy dispersive X-ray spectroscopy. Optical band gap was evaluated from the UV-visible absorption spectra of these films. Electrical characterizations were done using Hall effect and photocurrent measurements. A photovoltaic structure: glass/ITO/CdS/AgSbSe{sub 2}/Al was formed, in which CdS was deposited by chemical bath deposition. J-V characteristics of this structure showed V{sub oc} = 435 mV and J{sub sc} = 0.08 mA/cm{sup 2} under illumination using a tungsten halogen lamp. Preparation of a photovoltaic structure using AgSbSe{sub 2} as an absorber material by a non-toxic selenization process is achieved.

  8. Charge separation in contact systems with CdSe quantum dot layers

    International Nuclear Information System (INIS)

    Zillner, Elisabeth Franziska

    2013-01-01

    Quantum dot (QD) solar cells are a fast developing area in the field of solution processed photovoltaics. Central aspects for the application of QDs in solar cells are separation and transport of charge carriers in the QD layers and the formation of charge selective contacts. Even though efficiencies of up to 7% were reached in QD solar cells, these processes are not yet fully understood. In this thesis the mechanisms of charge separation, transport and recombination in CdSe QD layers and layer systems were studied. Charge separation was measured via surface photovoltage (SPV) at CdSe QD layers with thicknesses in the range of monolayers. To determine the influence of interparticle distance of QDs and trap states on the surface of QDs on charge separation, QDs with four different surfactant layers were studied. Layers of CdSe QDs were prepared on ITO, Si, SiO 2 and CdS by dip coating under inert atmosphere. The layers were characterized by Rutherford backscattering spectrometry, UV-vis spectroscopy, step profilometry and scanning electron microscopy to determine the areal density, the absorption and thickness of CdSe QD monolayers. SPV measurements show that initial charge separation from the CdSe QDs on ITO only happened from the fi rst monolayer of QDs. Electrons, photo-excited in the fi rst monolayer of CdSe QDs, were trapped on the ITO surface. The remaining free holes were trapped in surface states and/or diffused into the neighboring QD layers. The thick surfactant layer (∼ 1.6 nm) of pristine QDs had to be reduced by washing and/or ligand exchange for separation of photo-excited charge carriers. Both, interparticle distance and trap density, influenced the processes of charge separation and recombination. SPV transients of CdSe monolayers could be described by a single QD approximation model, based on Miller-Abrahams hopping of holes between the delocalized excitonic state, traps on the surface of the QD and the filled trap on the ITO surface

  9. Charge separation in contact systems with CdSe quantum dot layers

    Energy Technology Data Exchange (ETDEWEB)

    Zillner, Elisabeth Franziska

    2013-03-06

    Quantum dot (QD) solar cells are a fast developing area in the field of solution processed photovoltaics. Central aspects for the application of QDs in solar cells are separation and transport of charge carriers in the QD layers and the formation of charge selective contacts. Even though efficiencies of up to 7% were reached in QD solar cells, these processes are not yet fully understood. In this thesis the mechanisms of charge separation, transport and recombination in CdSe QD layers and layer systems were studied. Charge separation was measured via surface photovoltage (SPV) at CdSe QD layers with thicknesses in the range of monolayers. To determine the influence of interparticle distance of QDs and trap states on the surface of QDs on charge separation, QDs with four different surfactant layers were studied. Layers of CdSe QDs were prepared on ITO, Si, SiO{sub 2} and CdS by dip coating under inert atmosphere. The layers were characterized by Rutherford backscattering spectrometry, UV-vis spectroscopy, step profilometry and scanning electron microscopy to determine the areal density, the absorption and thickness of CdSe QD monolayers. SPV measurements show that initial charge separation from the CdSe QDs on ITO only happened from the fi rst monolayer of QDs. Electrons, photo-excited in the fi rst monolayer of CdSe QDs, were trapped on the ITO surface. The remaining free holes were trapped in surface states and/or diffused into the neighboring QD layers. The thick surfactant layer ({approx} 1.6 nm) of pristine QDs had to be reduced by washing and/or ligand exchange for separation of photo-excited charge carriers. Both, interparticle distance and trap density, influenced the processes of charge separation and recombination. SPV transients of CdSe monolayers could be described by a single QD approximation model, based on Miller-Abrahams hopping of holes between the delocalized excitonic state, traps on the surface of the QD and the filled trap on the ITO surface

  10. Photoacoustic spectroscopy of thin films of As2S3, As2Se3 and GeSe2

    Indian Academy of Sciences (India)

    Photoacoustic spectroscopy (PAS) is one of the important branches of spectroscopy, which enables one to detect light-induced heat production following the absorption of pulsed radiation by the sample. As2S3, As2Se3 and GeSe2 exhibit a wide variety of photo-induced phenomena that enable them to be used as optical ...

  11. Fundamental absorption edge in CuIn5Se8 and CuGa3Se5 single crystals

    International Nuclear Information System (INIS)

    Leon, M.; Merino, J.M.; Levcenko, S.; Nateprov, A.; Tezlevan, V.; Arushanov, E.; Syrbu, N.N.

    2006-01-01

    Optical absorption spectra of CuIn 5 Se 8 and CuGa 3 Se 5 single crystals have been investigated. The energy gap E g for CuIn 5 Se 8 (CuGa 3 Se 5 ) was found to be varied from 1.27(1.79) to 1.21(1.71) eV in the temperature range between 10 and 300 K. The temperature dependence of E g was studied by means of the Einstein model and the Paessler model. The Einstein temperature {222(267)K}, the Debye temperature {310(380)K}, a dimensionless constant related to the electron-phonon coupling {1.62(2.65)} as well as an effective energy {20 (24) meV} and a cut-off phonon energy {35(39) meV} have been estimated for CuIn 5 Se 8 (CuGa 3 Se 5 ). It was also found that the major contribution of phonons to the shift of E g versus temperature in CuIn 5 Se 8 (CuGa 3 Se 5 ) is mainly from optical phonons. (copyright 2006 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (Abstract Copyright [2006], Wiley Periodicals, Inc.)

  12. Cs2SeO4-UO2SeO4-H2O system at 25 deg C

    International Nuclear Information System (INIS)

    Serezhkina, L.B.; Serezhkin, V.N.

    1987-01-01

    Using the method of isothermal solubility at 25 deg C the interaction of cesium and uranyl selenates in aqueous solution is studied. Formation of congruently soluble Cs 2 UO 2 (SeO 4 ) 2 x2H 2 O and Cs 2 (UO 2 ) 2 x(SeO 4 ) 3 is ascertained, their crystallographic characteristics being determined

  13. Detrital zircon study along the Tsangpo River, SE Tibet

    Science.gov (United States)

    Liang, Y.; Chung, S.; Liu, D.; O'Reilly, S. Y.; Chu, M.; Ji, J.; Song, B.; Pearson, N. J.

    2004-12-01

    The interactions among tectonic uplift, river erosion and alluvial deposition are fundamental processes that shape the landscape of the Himalayan-Tibetan orogen since its creation from early Cenozoic time. To better understand these processes around the eastern Himalayan Syntaxis, we conducted a study by systematic sampling riverbank sediments along the Tsangpo River, SE Tibet. Detrital zircons separated from the sediments were subjected to U-Pb dating by the SHRIMP II at the Beijing SHRIMP Center and then in-situ measurements of Hf isotope ratios using LA-MC-ICPMS at GEMOC. These results, together with U-Pb ages and Hf isotope data that we recently obtained for the Transhimalayan plutonic and surrounding basement rocks, allow a more quantitative examination of the provenance or protosource areas for the river sediments. Consequently, the percentage inputs from these source areas can be estimated. Our study indicates that, before the Tsangpo River flows into the Namche Barwa Syntaxis of the eastern Himalayas where the River forms a 180° Big Bend gorge and crosscuts the Himalayan sequences, the Gangdese batholith that crops out just north of the River appear to be an overwhelming source accounting for ˜50 % of the bank sediments. The Tethyan Himalayan sequences south of the River are the second important source, with an input of ˜25 %. The proportion of sediment supply changes after the River enters the Big Bend gorge and turns to south: ˜25 % of detrital zircons are derived from the Greater Himalayas so that the input from the Tethyan Himalayas decreases (< 10 %) despite those from the Gangdese batholith remains high ( ˜40 %). Comparing with the sediment budget of the Brahmaputra River in the downstream based on literature Sr, Nd and Os isotope information, which suggests dominant ( ˜90-60 %) but subordinate ( ˜10-40 %) contributions by the (Greater and Lesser) Himalayan and Tibetan (including Tethyan Himalayan) rocks, respectively, the change is interpreted

  14. Electrochemical synthesis of nanostructured Se-doped SnS: Effect of Se-dopant on surface characterizations

    International Nuclear Information System (INIS)

    Kafashan, Hosein; Azizieh, Mahdi; Balak, Zohre

    2017-01-01

    Highlights: • Nanostructured SnS_1_-_xSe_x thin films were prepared by using electrodeposition method. • The XRD patterns obviously showed that the synthesized films were polycrystalline. • The PL spectra of SnS_1_-_xSe_x thin films showed four emission peaks. • The UV–vis spectra shows a variation in the optical band gap energy of SnS_1_-_xSe_x thin films from 1.22 to 1.65 eV. • SnS_1_-_xSe_x thin films would be suitable for use as absorber layers. - Abstract: SnS_1_-_xSe_x nanostructures with different Se-dopant concentrations were deposited on fluorine doped tin oxide (FTO) substrate through cathodic electrodeposition technique. The pH, temperature, applied potential (E), and deposition time remained were 2.1, 60 °C, −1 V, and 30 min, respectively. SnS_1_-_xSe_x nanostructures were characterized using X-ray diffraction (XRD), field emission scanning electron microcopy (FESEM), energy dispersive X-ray spectroscopy (EDX), room temperature photoluminescence (PL), and UV–vis spectroscopy. The XRD patterns revealed that the SnS_1_-_xSe_x nanostructures were polycrystalline with orthorhombic structure. FESEM showed various kinds of morphologies in SnS_1_-_xSe_x nanostructures due to Se-doping. PL and UV–vis spectroscopy were used to evaluate the optical properties of SnS_1_-_xSe_x thin films. The PL spectra of SnS_1_-_xSe_x nanostructures displayed four emission peaks, those are a blue, a green, an orange, and a red emission. UV–vis spectra showed that the optical band gap energy (E_g) of SnS_1_-_xSe_x nanostructures varied between 1.22–1.65 eV, due to Se-doping.

  15. Electrochemical synthesis of nanostructured Se-doped SnS: Effect of Se-dopant on surface characterizations

    Energy Technology Data Exchange (ETDEWEB)

    Kafashan, Hosein, E-mail: hosein840521@gmail.com; Azizieh, Mahdi; Balak, Zohre

    2017-07-15

    Highlights: • Nanostructured SnS{sub 1-x}Se{sub x} thin films were prepared by using electrodeposition method. • The XRD patterns obviously showed that the synthesized films were polycrystalline. • The PL spectra of SnS{sub 1-x}Se{sub x} thin films showed four emission peaks. • The UV–vis spectra shows a variation in the optical band gap energy of SnS{sub 1-x}Se{sub x} thin films from 1.22 to 1.65 eV. • SnS{sub 1-x}Se{sub x} thin films would be suitable for use as absorber layers. - Abstract: SnS{sub 1-x}Se{sub x} nanostructures with different Se-dopant concentrations were deposited on fluorine doped tin oxide (FTO) substrate through cathodic electrodeposition technique. The pH, temperature, applied potential (E), and deposition time remained were 2.1, 60 °C, −1 V, and 30 min, respectively. SnS{sub 1-x}Se{sub x} nanostructures were characterized using X-ray diffraction (XRD), field emission scanning electron microcopy (FESEM), energy dispersive X-ray spectroscopy (EDX), room temperature photoluminescence (PL), and UV–vis spectroscopy. The XRD patterns revealed that the SnS{sub 1-x}Se{sub x} nanostructures were polycrystalline with orthorhombic structure. FESEM showed various kinds of morphologies in SnS{sub 1-x}Se{sub x} nanostructures due to Se-doping. PL and UV–vis spectroscopy were used to evaluate the optical properties of SnS{sub 1-x}Se{sub x} thin films. The PL spectra of SnS{sub 1-x}Se{sub x} nanostructures displayed four emission peaks, those are a blue, a green, an orange, and a red emission. UV–vis spectra showed that the optical band gap energy (E{sub g}) of SnS{sub 1-x}Se{sub x} nanostructures varied between 1.22–1.65 eV, due to Se-doping.

  16. SeLeCT: a lexical cohesion based news story segmentation system

    OpenAIRE

    Stokes, Nicola; Carthy, Joe; Smeaton, Alan F.

    2004-01-01

    In this paper we compare the performance of three distinct approaches to lexical cohesion based text segmentation. Most work in this area has focused on the discovery of textual units that discuss subtopic structure within documents. In contrast our segmentation task requires the discovery of topical units of text i.e., distinct news stories from broadcast news programmes. Our approach to news story segmentation (the SeLeCT system) is based on an analysis of lexical cohesive strength between ...

  17. Inkjet?Printed Cu2ZnSn(S, Se)4 Solar Cells

    OpenAIRE

    Lin, Xianzhong; Kavalakkatt, Jaison; Lux?Steiner, Martha Ch.; Ennaoui, Ahmed

    2015-01-01

    Cu2ZnSn(S, Se)4?based solar cells with total area (0.5 cm2) power conversion efficiency of 6.4% are demonstrated from thin film absorbers processed by inkjet printing technology of Cu?Zn?Sn?S precursor ink followed by selenization. The device performance is limited by the low fill factor, which is due to the high series resistance.

  18. Inkjet-Printed Cu2ZnSn(S, Se)4 Solar Cells.

    Science.gov (United States)

    Lin, Xianzhong; Kavalakkatt, Jaison; Lux-Steiner, Martha Ch; Ennaoui, Ahmed

    2015-06-01

    Cu 2 ZnSn(S, Se) 4 -based solar cells with total area (0.5 cm 2 ) power conversion efficiency of 6.4% are demonstrated from thin film absorbers processed by inkjet printing technology of Cu-Zn-Sn-S precursor ink followed by selenization. The device performance is limited by the low fill factor, which is due to the high series resistance.

  19. Investigation of short and ballistic coupling in vertical NbSe2 - graphene - NbSe2 Josephson junctions

    Science.gov (United States)

    Kim, Minsoo; Park, Geon-Hyoung; Yi, Jongyoon; Lee, Jae Hyeong; Park, Jinho; Lee, Hu-Jong

    2H-NbSe2 is a layered two-dimensional superconducting material, which can be constructed into a van der Waals heterostructure with versatile functionality. Here we fabricated a vertically stacked NbSe2 - graphene - NbSe2 heterostructure by the dry transfer technique, where defect-free contact via van der Waals force provides the high interfacial transparency. Insertion of an atomically thin graphene layer between two NbSe2 flakes ensures the formation of highly coherent proximity Josephson coupling. Observed temperature dependence of the junction critical current (Ic) and large value of IcRn product (as large as 2.3ΔNbSe 2) reveal the short and ballistic Josephson coupling characteristics. Large junction critical current density of 104 A/cm2, multiple Andreev reflection in the subgap structure of the differential conductance, and magnetic field modulation of Ic also suggest the strong Josephson coupling via the graphene layer.

  20. ¿Qué se juega al jugar un juego?

    Directory of Open Access Journals (Sweden)

    Kalejman, Cecilia

    2012-06-01

    Full Text Available En el presente artículo se considera el juego en relación a la niñez. Se indaga acerca del papel que juega el juego en la niñez intentando responder a diversas preguntas, entre ellas la más importante: ¿Qué significa jugar? A lo largo de esta etapa del desarrollo en que comienza a constituirse la subjetividad del individuo el juego constituye, sin dudas, un factor central, una herramienta fundamental en el desarrollo. Juego no es sólo el juego dramático, también consideramos para nuestro análisis aquellas modalidades de juego que se transmiten de generación en generación, juegos de construcción, los dibujos, teniendo en cuenta asimismo los objetos utilizados en los juegos, los contenidos de los mismos, los espacios en los que se desarrollan. Se piensa y se interpreta al juego, como un derecho y como un modo de expresión del niño, se finaliza este desarrollo con una conclusión acera del juego y el espacio que ocupa en la vida cotidiana.

  1. Synthesis of ZnSe and ZnSe:Cu quantum dots by a room temperature photochemical (UV-assisted) approach using Na2 SeO3 as Se source and investigating optical properties.

    Science.gov (United States)

    Khafajeh, R; Molaei, M; Karimipour, M

    2017-06-01

    In this study, ZnSe and ZnSe:Cu quantum dots (QDs) were synthesized using Na 2 SeO 3 as the Se source by a rapid and room temperature photochemical (UV-assisted) approach. Thioglycolic acid (TGA) was employed as the capping agent and UV illumination activated the chemical reactions. Synthesized QDs were successfully characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), photoluminescence (PL) and UV-visible (UV-vis) spectroscopy, Fourier transform-infrared (FT-IR), and energy dispersive X-ray spectroscopy (EDX). XRD analysis demonstrated the cubic zinc blend phase QDs. TEM images indicated that round-shaped particles were formed, most of which had a diameter of about 4 nm. The band gap of the ZnSe QDs was higher than that for ZnSe in bulk. PL spectra indicated an emission with three peaks related to the excitonic, surface trap states and deep level (DL) states. The band gap and QD emission were tunable only by UV illumination time during synthesis. ZnSe:Cu showed green emission due to transition of electrons from the Conduction band (CB) or surface trap states to the 2 T 2 acceptor levels of Cu 2 + . The emission was increased by increasing the Cu 2 + ion concentration, such that the optimal value of PL intensity was obtained for the nominal mole ratio of Cu:Zn 1.5%. Copyright © 2016 John Wiley & Sons, Ltd.

  2. Novel mechanical behaviors of wurtzite CdSe nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Fu, Bing [Shanghai Normal University, Department of Physics (China); Chen, Li [MCPHS University, School of Arts and Sciences (United States); Xie, Yiqun; Feng, Jie; Ye, Xiang, E-mail: yexiang@shnu.edu.cn [Shanghai Normal University, Department of Physics (China)

    2015-09-15

    As an important semiconducting nanomaterial, CdSe nanowires have attracted much attention. Although many studies have been conducted in the electronic and optical properties of CdSe NWs, the mechanical properties of Wurtzite (WZ) CdSe nanowires remain unclear. Using molecular dynamics simulations, we have studied the tensile mechanical properties and behaviors of [0001]-oriented Wurtzite CdSe nanowires. By monitoring the stretching processes of CdSe nanowires, three distinct structures are found: the WZ wire, a body-centered tetragonal structure with four-atom rings (denoted as BCT-4), and a structure that consists of ten-atom rings with two four-atom rings (denoted as TAR-4) which is observed for the first time. Not only the elastic tensile characteristics are highly reversible under unloading, but a reverse transition between TAR-4 and BCT-4 is also observed. The stretching processes also have a strong dependence on temperature. A tubular structure similar to carbon nanotubes is observed at 150 K, a single-atom chain is formed at 300, 350 and 450 K, and a double-atom chain is found at 600 K. Our findings on tensile mechanical properties of WZ CdSe nanowires does not only provide inspiration to future study on other properties of CdSe nanomaterials but also help design and build efficient nanoscale devices.

  3. CdSe/ZnSe quantum dot structures grown by molecular beam epitaxy with a CdTe submonolayer stressor

    International Nuclear Information System (INIS)

    Sedova, I. V.; Lyublinskaya, O. G.; Sorokin, S. V.; Sitnikova, A. A.; Toropov, A. A.; Donatini, F.; Dang, Si Le; Ivanov, S. V.

    2007-01-01

    A procedure for formation of CdSe quantum dots (QDs) in a ZnSe matrix is suggested. The procedure is based on the introduction of a CdTe submonolayer stressor deposited on the matrix surface just before deposition of the material of the QDs. (For CdTe/ZnSe structure, the relative lattice mismatch is Δa/a ∼ 14%.) The stressor forms small strained islands at the ZnSe surface, thus producing local fields of high elastic stresses controlling the process of the self-assembling of the QDs. According to the data of transmission electron microscopy, this procedure allows a considerable increase in the surface density of QDs, with a certain decrease in their lateral dimensions (down to 4.5 ± 1.5 nm). In the photoluminescence spectra, a noticeable (∼150 meV) shift of the peak to longer wavelengths from the position of the reference CdSe/ZnSe QD structure is observed. The shift is due to some transformation of the morphology of the QDs and an increase in the Cd content in the QDs. Comprehensive studies of the nanostructures by recording and analyzing the excitation spectra of photoluminescence, the time-resolved photoluminescence spectra, and the cathodoluminescence spectra show that the emission spectra involve two types of optical transitions, namely, the type-I transitions in the CdSeTe/ZnSe QDs and the type-II transitions caused mainly by the low cadmium content (Zn,Cd)(Se,Te)/ZnSe layer formed between the QDs

  4. Copper Selenidophosphates Cu4P2Se6, Cu4P3Se4, Cu4P4Se3, and CuP2Se, Featuring Zero-, One-, and Two-Dimensional Anions.

    Science.gov (United States)

    Kuhn, Alexander; Schoop, Leslie M; Eger, Roland; Moudrakovski, Igor; Schwarzmüller, Stefan; Duppel, Viola; Kremer, Reinhard K; Oeckler, Oliver; Lotsch, Bettina V

    2016-08-15

    Five new compounds in the Cu/P/Se phase diagram have been synthesized, and their crystal structures have been determined. The crystal structures of these compounds comprise four previously unreported zero-, one-, and two-dimensional selenidophosphate anions containing low-valent phosphorus. In addition to two new modifications of Cu4P2Se6 featuring the well-known hexaselenidohypodiphosphate(IV) ion, there are three copper selenidophosphates with low-valent P: Cu4P3Se4 contains two different new anions, (i) a monomeric (zero-dimensional) selenidophosphate anion [P2Se4](4-) and (ii) a one-dimensional selenidophosphate anion [Formula: see text], which is related to the well-known gray-Se-like [Formula: see text] Zintl anion. Cu4P4Se3 contains one-dimensional [Formula: see text] polyanions, whereas CuP2Se contains the 2D selenidophosphate [Formula: see text] polyanion. It consists of charge-neutral CuP2Se layers separated by a van der Waals gap which is very rare for a Zintl-type phase. Hence, besides black P, CuP2Se constitutes a new possible source of 2D oxidized phosphorus containing layers for intercalation or exfoliation experiments. Additionally, the electronic structures and some fundamental physical properties of the new compounds are reported. All compounds are semiconducting with indirect band gaps of the orders of around 1 eV. The phases reported here add to the structural diversity of chalcogenido phosphates. The structural variety of this family of compounds may translate into a variety of tunable physical properties.

  5. Social Set Visualizer (SoSeVi) II

    DEFF Research Database (Denmark)

    Flesch, Benjamin; Vatrapu, Ravi

    2016-01-01

    This paper reports the second iteration of the Social Set Visualizer (SoSeVi), a set theoretical visual analytics dashboard of big social data. In order to further demonstrate its usefulness in large-scale visual analytics tasks of individual and collective behavior of actors in social networks......, the current iteration of the Social Set Visualizer (SoSeVi) in version II builds on recent advancements in visualizing set intersections. The development of the SoSeVi dashboard involved cutting-edge open source visual analytics libraries (D3.js) and creation of new visualizations such as of actor mobility...

  6. Se interlayer in CIGS absorption layer for solar cell devices

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seung-Kyu; Sim, Jae-Kwan [Semiconductor Materials Process Laboratory, School of Advanced Materials Engineering, Research Center for Advanced Materials Development, Chonbuk National University, Deokjin-Dong 664-14, Jeonju 561-756 (Korea, Republic of); Kissinger, N.J. Suthan [Department of General Studies, Physics Group, Jubail University College, Royal Commission for Jubail, Jubail 10074 (Saudi Arabia); Song, Il-Seok; Kim, Jin-Soo; Baek, Byung-Joon [Semiconductor Materials Process Laboratory, School of Advanced Materials Engineering, Research Center for Advanced Materials Development, Chonbuk National University, Deokjin-Dong 664-14, Jeonju 561-756 (Korea, Republic of); Lee, Cheul-Ro, E-mail: crlee7@jbnu.ac.kr [Semiconductor Materials Process Laboratory, School of Advanced Materials Engineering, Research Center for Advanced Materials Development, Chonbuk National University, Deokjin-Dong 664-14, Jeonju 561-756 (Korea, Republic of)

    2015-06-05

    Highlights: • Se interlayer is deposited between the CuGa and CuIn/In/Mo/STS stacked layer. • Both CIG precursor layers were selenized at 500 °C for 1 h. • SIMS depth profile shows that Ga distribution is uniform by Se interlayer. • The efficiency was improved for the CIGS solar cell by Se interlayer. - Abstract: A CIGS absorber layer with high gallium contents in the space-charge region can reduce the carrier recombination and improve the open circuit voltage V{sub oc}. Therefore, controlling Ga grading on top of CIGS thin film solar cells is the main objective of this experiment. To reduce Selenium (Se) vacancy, it is important that the diffusion of Ga elements into Se vacancy between Mo back contact and CIGS absorption layer would be controlled. In order to reduce Se vacancy and confirm Ga inter-diffusion, two CIGS solar cells were fabricated by converting CIG precursor with and without Se interlayer. The copper-indium metallic precursors were fabricated corresponding to the sequence CuIn/In/Mo/STS on stainless steel (STS) substrates by sequential direct current magnetron sputtering while Se layer was evaporated by rapid thermal annealing (RTA) system to obtain a Se/CuIn/In/Mo/STS stack. CuGa precursor layer was also fabricated on the Se/CuIn/In/Mo/STS stack. Finally, both CuGa/Se/CuIn/In/Mo/STS and CuGa/CuIn/In/Mo/STS stacks were selenized at 500 °C for 1 h. It was clearly observed from the secondary ion mass spectroscopy (SIMS) and X-ray diffraction (XRD) that there was a change between the fabricated CIGS absorption layers and the amount of Ga elements. Furthermore, the Ga elements gradually decreased from the top to the bottom layer of the CIGS absorption layer. We also discussed the effect of Se interlayer in the CIGS absorption layer and its influence on the solar cell’s performance.

  7. Reversible ultrafast melting in bulk CdSe

    International Nuclear Information System (INIS)

    Wu, Wenzhi; He, Feng; Wang, Yaguo

    2016-01-01

    In this work, transient reflectivity changes in bulk CdSe have been measured with two-color femtosecond pump-probe spectroscopy under a wide range of pump fluences. Three regions of reflectivity change with pump fluences have been consistently revealed for excited carrier density, coherent phonon amplitude, and lattice temperature. For laser fluences from 13 to 19.3 mJ/cm 2 , ultrafast melting happens in first several picoseconds. This melting process is purely thermal and reversible. A complete phase transformation in bulk CdSe may be reached when the absorbed laser energy is localized long enough, as observed in nanocrystalline CdSe

  8. Development of conductive nanotemplates on ZnSe

    International Nuclear Information System (INIS)

    Monaico, Eduard; Tiginyanu, Ion; Colibaba, Gleb; Nedeoglo, D.D.; Cojocaru, Ala; Foell, Helmut

    2011-01-01

    We demonstrate the possibility to fabricate arrays of pores oriented perpendicular and parallel to the top surface of the ZnSe nanotemplate. The control of material conductivity allows one to produce porous ZnSe samples with the mean pore diameter and characteristic skeleton wall thickness from several hundreds of nanometers to about 15 nm. In addition, electrochemical treatment of ZnSe single crystals using photoresist masks allows one to prepare buried porous structures with pores directed parallel to the top template surface, which is especially important for photonic applications.

  9. Magnetic study of Fe-doped CdSe nanomaterials

    International Nuclear Information System (INIS)

    Das, Sayantani; Banerjee, Sourish; Sinha, T. P.

    2016-01-01

    Nanoparticles of pure and iron (50 %) doped cadmium selenide (CdSe) have been synthesized by soft chemical route. EDAX analysis supports the inclusion of Fe into CdSe nanoparticles. The average particle size of pure and doped CdSe is found to be ∼50 nm from scanning electron microscopy (SEM). Magnetization of the samples are measured under the field cooled (FC) and zero field cooled (ZFC) modes in the temperature range from 5K to 300K applying a magnetic field of 500Oe. Field dependent magnetization (M-H) measurement indicates presence of room temperature (RT) paramagnetism and low temperature (5K) ferromagnetism of the sample.

  10. Polybutylcyanoacrylate nanoparticles for the delivery of [75Se]norcholestenol

    International Nuclear Information System (INIS)

    Kreuter, J.; Wilson, C.G.

    1983-01-01

    Polybutylcyanoacrylate nanoparticles have been used for the intravenous and intramuscular administration of a steroidal material ([ 75 Se]norcholestenol) to the rabbit. Whole body profiles of 75 Se, obtained using a gamma camera over a period of 30 days, show that the [ 75 Se]norcholestenol is retained for a longer period of time with the nanoparticle system than for the control system where the drug was dissolved in a micellar system. In vitro dialysis experiments indicate that the thermodynamic activity of the drug can be increased by its incorporation within nanoparticles. This increased activity may affect the distribution of the drug into body tissues. (Auth.)

  11. Se interlayer in CIGS absorption layer for solar cell devices

    International Nuclear Information System (INIS)

    Lee, Seung-Kyu; Sim, Jae-Kwan; Kissinger, N.J. Suthan; Song, Il-Seok; Kim, Jin-Soo; Baek, Byung-Joon; Lee, Cheul-Ro

    2015-01-01

    Highlights: • Se interlayer is deposited between the CuGa and CuIn/In/Mo/STS stacked layer. • Both CIG precursor layers were selenized at 500 °C for 1 h. • SIMS depth profile shows that Ga distribution is uniform by Se interlayer. • The efficiency was improved for the CIGS solar cell by Se interlayer. - Abstract: A CIGS absorber layer with high gallium contents in the space-charge region can reduce the carrier recombination and improve the open circuit voltage V oc . Therefore, controlling Ga grading on top of CIGS thin film solar cells is the main objective of this experiment. To reduce Selenium (Se) vacancy, it is important that the diffusion of Ga elements into Se vacancy between Mo back contact and CIGS absorption layer would be controlled. In order to reduce Se vacancy and confirm Ga inter-diffusion, two CIGS solar cells were fabricated by converting CIG precursor with and without Se interlayer. The copper-indium metallic precursors were fabricated corresponding to the sequence CuIn/In/Mo/STS on stainless steel (STS) substrates by sequential direct current magnetron sputtering while Se layer was evaporated by rapid thermal annealing (RTA) system to obtain a Se/CuIn/In/Mo/STS stack. CuGa precursor layer was also fabricated on the Se/CuIn/In/Mo/STS stack. Finally, both CuGa/Se/CuIn/In/Mo/STS and CuGa/CuIn/In/Mo/STS stacks were selenized at 500 °C for 1 h. It was clearly observed from the secondary ion mass spectroscopy (SIMS) and X-ray diffraction (XRD) that there was a change between the fabricated CIGS absorption layers and the amount of Ga elements. Furthermore, the Ga elements gradually decreased from the top to the bottom layer of the CIGS absorption layer. We also discussed the effect of Se interlayer in the CIGS absorption layer and its influence on the solar cell’s performance

  12. The RiSE climbing robot: body and leg design

    Science.gov (United States)

    Saunders, A.; Goldman, D. I.; Full, R. J.; Buehler, M.

    2006-05-01

    The RiSE robot is a biologically inspired, six legged climbing robot, designed for general mobility in scansorial (vertical walls, horizontal ledges, ground level) environments. It exhibits ground reaction forces that are similar to animal climbers and does not rely on suction, magnets or other surface-dependent specializations to achieve adhesion and shear force. We describe RiSE's body and leg design as well as its electromechanical, communications and computational infrastructure. We review design iterations that enable RiSE to climb 90° carpeted, cork covered and (a growing range of) stucco surfaces in the quasi-static regime.

  13. Colegio Nuestra Señora del Carmen-Ikastetxea

    OpenAIRE

    García Sedano, Esther

    2012-01-01

    Este trabajo se centra en la atención a la diversidad, enfocado en aquellos alumnos con necesidades educativas especiales por dificultades de aprendizaje, por trastorno de déficit de atención, dislexia, inteligencia límite (bordeline) y síndrome de triple X. Con él también se pretende la adaptación de niños de nacionalidad china a nuestros hábitos y se les ilustra en el método silábico para que aprendan el idioma del castellano con prontitud para evitar la dislexia, entre otros problemas. ...

  14. Narrativas sobre conjugalidade de mulheres que se relacionam com crossdressers

    OpenAIRE

    Vencato, Anna Paula

    2017-01-01

    Resumo: Este texto discute dados coletados em pesquisa com mulheres que se identificam como “esposas” ou “S/O’s” de homens que “praticam crossdressing”. É, também, um desdobramento de minha tese de Doutorado, sobre como homens que se identificam como crossdressers negociam esta prática em suas vidas cotidianas. A pesquisa parte de uma etnografia e é complementada por entrevistas semiestruturadas com estas mulheres. Busca-se compreender como elas lidam com as tensões relativas às convenções so...

  15. Atomic imaging of an InSe single-crystal surface with atomic force microscope

    OpenAIRE

    Uosaki, Kohei; Koinuma, Michio

    1993-01-01

    The atomic force microscope was employed to observed in air the surface atomic structure of InSe, one of III-VI compound semiconductors with layered structures. Atomic arrangements were observed in both n-type and p-type materials. The observed structures are in good agreement with those expected from bulk crystal structures. The atomic images became less clear by repeating the imaging process. Wide area imaging after the imaging of small area clearly showed that a mound was created at the sp...

  16. ¿Con humor se explica y se aprende una lengua mejor?

    Directory of Open Access Journals (Sweden)

    Ricard Morant

    2010-11-01

    Full Text Available Normal 0 21 false false false ES X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} En el siguiente artículo nos proponemos reflexionar sobre la importancia del humor como estrategia didáctica. Para plantear si “el enseñar contento y el aprender con alegría” pueden aumentar la eficacia en el proceso de enseñanza-aprendizaje presentaremos en el primer apartado las ideas de partida, mostraremos cómo a pesar de las múltiples ventajas que puede aportar el humor a las aulas, se omite su empleo por la existencia de ciertos prejuicios y temores. Seguidamente, y a modo de ejemplo, expondremos, un tema, el tabú lingüístico, en clave de humor con el propósito de acabar planteando si el género humorístico beneficia o perjudica la práctica docente al hablar sobre una lengua o al tratar de enseñarla.

  17. Influence of CdSe layer air-baking on physical properties of CdSe-As2Se3 heterostructures

    International Nuclear Information System (INIS)

    Schauer, F.; Heza, S.; Kosek, F.; Cimpl, Z.

    1980-01-01

    An investigation is made of the influence of the air-baking time on the physical properties of a CdSe layer, which is a part of the heterogeneous structure CdSe-As 2 Se 3 used as a camera tube target. The I-U characteristics, C-U characteristics, the dependence of both the real and imaginary part admittance on frequency, and the photoconductance characteristics are measured. All measurements are carried out on heterostructures prepared with variable air-baking time of the CdSe layer: t =0, 5, 15, 40, and 120 min. The results of measurements contribute to the finding of the optimal production procedure with a minimum baking time of tsub(min) = 15 min. The heterostructures exhibit satisfactory properties. The dark current Isub(d)(U =1 V, T = 300 K) = 10 -10 Acm -2 with a rectification factor g(U = 10 V) = 10 6 and a capacitance C (2 kHz) = 2900 pFcm -2 . (author)

  18. Dipole strength in 80Se below the neutron-separation energy for the nuclear transmutation of 79Se

    Directory of Open Access Journals (Sweden)

    Makinaga Ayano

    2017-01-01

    Full Text Available The γ-ray strength function (γSF in 80Se is an important parameter to estimate the neutron-capture cross section of 79Se which is one of the long-lived fission products (LLFPs. Until now, the γSF method was applied for 80Se only above the neutron-separation energy (Sn and the evaluated 79Se(n,γ cross section has an instability caused by the GSF below Sn. We studied the dipole-strength distribution of 80Se in a photon-scattering experiment using bremsstrahlung produced by an electron beam of an energy of 11.5 MeV at the linear accelerator ELBE at HZDR. The present photoabsorption cross section of 80Se was combined with results of (γ,n experiments and are compared with predictions usinmg the TALYS code. We also estimated the 79Se(n,γ cross sections and compare them with TALYS predictionms and earlier work by other groups.

  19. Dipole strength in 80Se below the neutron-separation energy for the nuclear transmutation of 79Se

    Science.gov (United States)

    Makinaga, Ayano; Massarczyk, Ralph; Beard, Mary; Schwengner, Ronald; Otsu, Hideaki; Müller, Stefan; Röder, Marko; Schmidt, Konrad; Wagner, Andreas

    2017-09-01

    The γ-ray strength function (γSF) in 80Se is an important parameter to estimate the neutron-capture cross section of 79Se which is one of the long-lived fission products (LLFPs). Until now, the γSF method was applied for 80Se only above the neutron-separation energy (Sn) and the evaluated 79Se(n,γ) cross section has an instability caused by the GSF below Sn. We studied the dipole-strength distribution of 80Se in a photon-scattering experiment using bremsstrahlung produced by an electron beam of an energy of 11.5 MeV at the linear accelerator ELBE at HZDR. The present photoabsorption cross section of 80Se was combined with results of (γ,n) experiments and are compared with predictions usinmg the TALYS code. We also estimated the 79Se(n,γ) cross sections and compare them with TALYS predictionms and earlier work by other groups.

  20. Radiation stability of methionine-35S and selenomethionine-75Se

    International Nuclear Information System (INIS)

    Galateanu, I.; Lungu, V.V.; Viorel, D.

    1976-01-01

    The radiation stability of methionine- 35 S and selenomethionine 75 Se was investigated using the methods of thin-layer chromatography, gas chromatography and ESR. Radiation decomposition of methionine- 35 S mainly consists in an oxidation process and in the release of volatile products. The ESR-spectra of irradiated DL-methionine indicated a strong localization of the unpaired electrons on sulfur atoms. Radiation damage to selenomethionine- 75 Se as a function of radiation dose proved an increased stability of this compound and its radiation decomposition consists in the formation of oxidized products and by direct rupture of the selenium bounds accompanied by the formation of volatile compounds like CH 3 SEH and SeH 2 . The self-radiolysis of the aqueous solution of selenomethionine- 75 Se during its storage in air leads, however, to a lower decomposition rate which consists in the release of inorganic selenium and in an oxidation process. (author)

  1. Deelnemende bestuur as funksie van bestuurders se selfkonsep en mensbeskouing

    Directory of Open Access Journals (Sweden)

    W. P. Visser

    1997-06-01

    Opsomming Die literatuur toon 'n leemte aan navorsing betreffende individuele attribute wat 'n persoon tot deelnemende bestuur mag predisponeer. Met hierdie studie is ondersoek ingestel na die verband tussen twee suike attribute, naamlik selfkonsep en mensbeskouing enersyds, en gewilligheid tot deelnemende bestuur andersyds. 'n Instrument gebaseer op McGregor se teorie, is ontwikkel om mensbeskouing binne werkkonteks te meet. Met behulp van faktorontleding is twee faktore onttrek wat onderskeidelik intrinsieke en ekstrinsieke aspekte van 'n persoon se beskouing van ander se houding teenoor werk meet. 'n Gelykkansige steekproef uit 233 toesighouers van 'n openbare versorgingsonderneming het 196 bruikbare vraelyste opgelewer. 'n Beduidende verband tussen selfkonsep en mensbeskouing enersyds, en gewilligheid tot deelnemende bestuur andersyds, is met behulp van kanoniese korrelasie gevind (r =0,601; p < 0,01. Die bevinding bied steun vir McGregor se teorie dat 'n gunstige mensbeskouing tot 'n deelnemende bestuurstyl lei.

  2. Electronic Properties of Graphene-PtSe2 Contacts.

    Science.gov (United States)

    Sattar, Shahid; Schwingenschlögl, Udo

    2017-05-10

    In this article, we study the electronic properties of graphene in contact with monolayer and bilayer PtSe 2 using first-principles calculations. It turns out that there is no charge transfer between the components because of the weak van der Waals interaction. We calculate the work functions of monolayer and bilayer PtSe 2 and analyze the band bending at the contact with graphene. The formation of an n-type Schottky contact with monolayer PtSe 2 and a p-type Schottky contact with bilayer PtSe 2 is demonstrated. The Schottky barrier height is very low in the bilayer case and can be reduced to zero by 0.8% biaxial tensile strain.

  3. Electronic Properties of Graphene–PtSe2 Contacts

    KAUST Repository

    Sattar, Shahid

    2017-04-26

    In this article, we study the electronic properties of graphene in contact with monolayer and bilayer PtSe2 using first-principles calculations. It turns out that there is no charge transfer between the components because of the weak van der Waals interaction. We calculate the work functions of monolayer and bilayer PtSe2 and analyze the band bending at the contact with graphene. The formation of an n-type Schottky contact with monolayer PtSe2 and a p-type Schottky contact with bilayer PtSe2 is demonstrated. The Schottky barrier height is very low in the bilayer case and can be reduced to zero by 0.8% biaxial tensile strain.

  4. Preparation of PbSe nanoparticles by electron beam irradiation ...

    Indian Academy of Sciences (India)

    Wintec

    Recently, the synthesis of binary metal selenides of group. IV has been investigated ... Pb(Ac)2 and Se powder reacted ... hol (PVA), potassium hydroxide (KOH), and isopropyl. *Author for ... 40 ml distilled water and reacted adequately. Subse-.

  5. Thermal characterization of Se-Te thin films

    Czech Academy of Sciences Publication Activity Database

    Svoboda, R.; Kincl, Miloslav; Málek, J.

    2015-01-01

    Roč. 644, 25 September (2015), s. 40-46 ISSN 0925-8388 Institutional support: RVO:61389013 Keywords : krystallization kinetics * DSC * Se-Te glass Subject RIV: CA - Inorganic Chemistry Impact factor: 3.014, year: 2015

  6. ZnSe thin films by chemical bath deposition method

    Energy Technology Data Exchange (ETDEWEB)

    Lokhande, C.D.; Patil, P.S.; Tributsch, H. [Hahn-Meitner-Institute, Bereich Physikalische Chemie, Abt. CS, Glienicker Strasse-100, D-14109 Berlin (Germany); Ennaoui, A. [Hahn-Meitner-Institute, Bereich Physikalische Chemie, Abt. CG, Glienicker Strasse-100, D-14109 Berlin (Germany)

    1998-09-04

    The ZnSe thin films have been deposited onto glass substrates by the simple chemical bath deposition method using selenourea as a selenide ion source from an aqueous alkaline medium. The effect of Zn ion concentration, bath temperature and deposition time period on the quality and thickness of ZnSe films has been studied. The ZnSe films have been characterized by XRD, TEM, EDAX, TRMC (time-resolved microwave conductivity), optical absorbance and RBS techniques for their structural, compositional, electronic and optical properties. The as-deposited ZnSe films are found to be amorphous, Zn rich with optical band gap, Eg, equal to 2.9 eV

  7. Chemical bath ZnSe thin films: deposition and characterisation

    Science.gov (United States)

    Lokhande, C. D.; Patil, P. S.; Ennaoui, A.; Tributsch, H.

    1998-01-01

    The zinc selenide (ZnSe) thin films have been deposited by a simple and inexpensive chemical bath deposition (CBD) method. The selenourea was used as a selenide ion source. The ZnSe films have been characterised by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDAX), Rutherford back scattering (RBS), and optical absorption. The as-deposited ZnSe films on various substrates are found to be amorphous and contain O2 and N2 in addition to Zn and Se. The optical band gap of the film is estimated to be 2.9 eV. The films are photoactive as evidenced by time resolved microwave conductivity (TRMC).

  8. Electronic Properties of Graphene–PtSe2 Contacts

    KAUST Repository

    Sattar, Shahid; Schwingenschlö gl, Udo

    2017-01-01

    In this article, we study the electronic properties of graphene in contact with monolayer and bilayer PtSe2 using first-principles calculations. It turns out that there is no charge transfer between the components because of the weak van der Waals interaction. We calculate the work functions of monolayer and bilayer PtSe2 and analyze the band bending at the contact with graphene. The formation of an n-type Schottky contact with monolayer PtSe2 and a p-type Schottky contact with bilayer PtSe2 is demonstrated. The Schottky barrier height is very low in the bilayer case and can be reduced to zero by 0.8% biaxial tensile strain.

  9. Optical Properties of Multilayer CdSe/POLYMER Structures

    Science.gov (United States)

    Red'Ko, V. P.; Voitenkov, A. I.; Kovalenko, O. E.

    The effects of preparation condition, concentration and size of particles upon optical and photoelectrical characteristics of multilayer structures CdSe/polyethylene terephthalate obtained by electron-beam evaporation were investigated.

  10. Processing and characterization of bulk FeSe

    Czech Academy of Sciences Publication Activity Database

    Muralidhar, M.; Hanai, T.; Furutani, K.; Diko, P.; Jirsa, Miloš; Murakami, M.

    2016-01-01

    Roč. 4, č. 3 (2016), s. 109-115 ISSN 2328-2231 Institutional support: RVO:68378271 Keywords : FeSe * x-ray diffraction * magnetization measurements * SEM * EDX analysis Subject RIV: BM - Solid Matter Physics ; Magnetism

  11. Fabrication and Photocatalytic Properties of ZnSe Nanorod Films

    Directory of Open Access Journals (Sweden)

    Jiajia Yin

    2016-01-01

    Full Text Available ZnSe nanorod films grown on fused quartz glass substrates via a simple two-step synthesis protocol were demonstrated to be environmentally safe and effective recyclable photocatalysts. These films showed greatly enhanced photocatalytic activity compared to pulsed laser deposition ZnSe films in the degradation of methyl orange dye solutions. The well-crystalized ZnSe nanorods had a length of 15 µm and a diameter of 200 nm and were densely grown on the substrate. The morphology, crystal structure, crystal phase, and photophysical properties of the ZnSe nanorod films were investigated using field-emission scanning electron microscopy (FE-SEM, UV-Vis spectroscopy, X-ray diffraction (XRD, transmission electron microscopy (TEM, and high resolution transmission electron microscopy (HRTEM.

  12. Petrus Abelardus se Megariaanse argument in Theologia 'Scholarium'

    African Journals Online (AJOL)

    Test

    7 Jun 2011 ... Martin Heidegger se beroemde opmerking (1958:37; 'Die wêreld word donker . .... Luther en die Wes-Europese Kerkhervorming}]). 7. ...... King, P., 2004, 'Peter Abelard', Stanford Encyclopedia of Philosophy, viewed February.

  13. Nematicity, magnetism and superconductivity in FeSe.

    Science.gov (United States)

    Böhmer, Anna E; Kreisel, Andreas

    2018-01-17

    Iron-based superconductors are well known for their complex interplay between structure, magnetism and superconductivity. FeSe offers a particularly fascinating example. This material has been intensely discussed because of its extended nematic phase, whose relationship with magnetism is not obvious. Superconductivity in FeSe is highly tunable, with the superconducting transition temperature, T c , ranging from 8 K in bulk single crystals at ambient pressure to almost 40 K under pressure or in intercalated systems, and to even higher temperatures in thin films. In this topical review, we present an overview of nematicity, magnetism and superconductivity, and discuss the interplay of these phases in FeSe. We focus on bulk FeSe and the effects of physical pressure and chemical substitutions as tuning parameters. The experimental results are discussed in the context of the well-studied iron-pnictide superconductors and interpretations from theoretical approaches are presented.

  14. Hjemløse borgeres sygdom og brug af sundhedsydelser

    DEFF Research Database (Denmark)

    Benjaminsen, Lars; Birkelund, Jesper Fels; Enemark, Morten Holm

    sygdom er meget udbredt blandt hjemløse borgere. Men også når man korrigerer for misbrug og psykisk sygdom, har de hjemløse borgere forøget risiko for en række sygdomme som fx infektionssygdomme, lungebetændelse og KOL. Undersøgelsen identificerer også et merforbrug af sundhedsydelser blandt de hjemløse...... tandlæge og speciallæge. Den stærke oversygelighed i gruppen af hjemløse borgere peger generelt på et behov for at medtænke en sundhedsmæssig dimension i den sociale støtte til disse borgere. Undersøgelsen er finansieret af Helsefonden....

  15. Sample (S): SE57_S08 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE57_S08 Lotus japonicus (accessions B129 gifu and MG20 miyakojima) Lotus japonicus... NCBI taxonomy:34305 Lotus japonicus accessions were a gift from Dr. Toshio Aoki (Nihon University, Japan). ...

  16. Enhancement of hole mobility in InSe monolayer via an InSe and black phosphorus heterostructure.

    Science.gov (United States)

    Ding, Yi-Min; Shi, Jun-Jie; Xia, Congxin; Zhang, Min; Du, Juan; Huang, Pu; Wu, Meng; Wang, Hui; Cen, Yu-Lang; Pan, Shu-Hang

    2017-10-05

    To enhance the low hole mobility (∼40 cm 2 V -1 s -1 ) of InSe monolayer, a novel two-dimensional (2D) van der Waals heterostructure made of InSe and black phosphorus (BP) monolayers with high hole mobility (∼10 3 cm 2 V -1 s -1 ) has been constructed and its structural and electronic properties are investigated using first-principles calculations. We find that the InSe/BP heterostructure exhibits a direct band gap of 1.39 eV and type-II band alignment with electrons (holes) located in the InSe (BP) layer. The band offsets of InSe and BP are 0.78 eV for the conduction band minimum and 0.86 eV for the valence band maximum, respectively. Surprisingly, the hole mobility in the InSe/BP heterostructure exceeds 10 4 cm 2 V -1 s -1 , which is one order of magnitude larger than the hole mobility of BP and three orders larger than that of the InSe monolayer. The electron mobility is also increased to 3 × 10 3 cm 2 V -1 s -1 . The physical reason has been analyzed deeply, and a universal method is proposed to improve the carrier mobility of 2D materials by forming heterostructures with them and other 2D materials with complementary properties. The InSe/BP heterostructure can thus be widely used in nanoscale InSe-based field-effect transistors, photodetectors and photovoltaic devices due to its type-II band alignment and high carrier mobility.

  17. Antiphase Boundaries in the Turbostratically Disordered Misfit Compound (BiSe)(1+δ)NbSe2.

    Science.gov (United States)

    Mitchson, Gavin; Falmbigl, Matthias; Ditto, Jeffrey; Johnson, David C

    2015-11-02

    (BiSe)(1+δ)NbSe2 ferecrystals were synthesized in order to determine whether structural modulation in BiSe layers, characterized by periodic antiphase boundaries and Bi-Bi bonding, occurs. Specular X-ray diffraction revealed the formation of the desired compound with a c-axis lattice parameter of 1.21 nm from precursors with a range of initial compositions and initial periodicities. In-plane X-ray diffraction scans could be indexed as hk0 reflections of the constituents, with a rectangular basal BiSe lattice and a trigonal basal NbSe2 lattice. Electron micrographs showed extensive turbostratic disorder in the samples and the presence of periodic antiphase boundaries (approximately 1.5 nm periodicity) in BiSe layers oriented with the [110] direction parallel to the zone axis of the microscope. This indicates that the structural modulation in the BiSe layers is not due to coherency strain resulting from commensurate in-plane lattices. Electrical transport measurements indicate that holes are the dominant charge carrying species, that there is a weak decrease in resistivity as temperature decreases, and that minimal charge transfer occurs from the BiSe to NbSe2 layers. This is consistent with the lack of charge transfer from the BiX to the TX2 layers reported in misfit layer compounds where antiphase boundaries were observed. This suggests that electronic considerations, i.e., localization of electrons in the Bi-Bi pairs at the antiphase boundaries, play a dominant role in stabilizing the structural modulation.

  18. Synthesis and properties of new CdSe-AgI-As{sub 2}Se{sub 3} chalcogenide glasses

    Energy Technology Data Exchange (ETDEWEB)

    Kassem, M. [Univ Lille Nord de France, F-59000 Lille (France); ULCO, LPCA, EAC CNRS 4493 F-59140 Dunkerque (France); Le Coq, D., E-mail: david.lecoq@univ-littoral.fr [Univ Lille Nord de France, F-59000 Lille (France); ULCO, LPCA, EAC CNRS 4493 F-59140 Dunkerque (France); Fourmentin, M.; Hindle, F.; Bokova, M.; Cuisset, A.; Masselin, P.; Bychkov, E. [Univ Lille Nord de France, F-59000 Lille (France); ULCO, LPCA, EAC CNRS 4493 F-59140 Dunkerque (France)

    2011-02-15

    Research highlights: {yields} Determination of the glass-forming region in the pseudo-ternary CdSe-AgI-As{sub 2}Se{sub 3} system. {yields} Characterization of macroscopic properties of the new CdSe-AgI-As{sub 2}Se{sub 3} glasses. {yields} Far infrared transmission of chalcogenide glasses. {yields} Characterization of the total conductivity of CdSe-AgI-As{sub 2}Se{sub 3} glasses. -- Abstract: The glass-forming region in the pseudo-ternary CdSe-AgI-As{sub 2}Se{sub 3} system was determined. Measurements including differential scanning calorimetry (DSC), density, and X-ray diffraction were performed. The effect resulting from the addition of CdSe or AgI has been highlighted by examining three series of different base glasses. The characteristic temperatures of the glass samples, including glass transition (T{sub g}), crystallisation (T{sub x}), and melting (T{sub m}) temperatures are reported and used to calculate their {Delta}T = T{sub x} - T{sub g} and their Hruby, H{sub r} = (T{sub x} - T{sub g})/(T{sub m} - T{sub x}), criteria. Evolution of the total electrical conductivity {sigma} and the room temperature conductivity {sigma}{sub 298} was also studied. The terahertz transparency domain in the 50-600 cm{sup -1} region was pointed for different chalcogenide glasses (ChGs) and the potential of the THz spectroscopy was suggested to obtain structural information on ChGs.

  19. Insights into the microstructural and physical properties of colloidal Fe:ZnSe nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Xie, Ruishi, E-mail: rxie@foxmail.com [Analytical and Testing Center, Southwest University of Science and Technology, Mianyang 621010 (China); Li, Yuanli [Department of Materials, Southwest University of Science and Technology, Mianyang 621010 (China); Jiang, Linhai; Zhang, Xingquan [Analytical and Testing Center, Southwest University of Science and Technology, Mianyang 621010 (China)

    2014-10-30

    Highlights: • We present a facile and environmentally friendly protocol to fabricate Fe:ZnSe nanocrystals. • The microstructural and physical properties of Fe:ZnSe nanocrystals were systematically investigated. • The current synthesis is dramatically simple and highly reproducible, it will facilitate the commercial scale synthesis of highly luminescent water-soluble nanocrystals with surface functionality in the near future. - Abstract: Here, we present a facile and environmentally friendly synthetic protocol to fabricate highly luminescent and water-soluble Fe:ZnSe nanocrystals in aqueous solution at low temperature. The microstructure and various physical properties (e.g., crystal structure, interplanar spacing, lattice parameter, crystalline size, lattice microstrain, intrinsic stress, X-ray density, specific surface area, dislocation density, porosity, agglomeration number) of the Fe:ZnSe nanocrystals were systematically investigated using X-ray diffraction. The particle size and morphology of the Fe:ZnSe nanocrystals were determined by transmission electron microscopy. The optical properties (e.g., absorption and photoluminescence) of the fabricated nanocrystals were explored using ultraviolet–visible absorption and photoluminescence spectroscopies, respectively. The surface functionalization of the Fe:ZnSe nanocrystals by mercaptoacetic acid ligand was evidenced by Fourier transform infrared spectroscopy. To confirm the elementary composition of the obtained nanocrystals, Energy dispersive X-ray spectroscopy was performed. To further shed light upon elemental distribution of the resulting nanocrystals, elemental mapping measurements were conducted. Moreover, the underlying mechanisms were also elucidated. As a consequence, the current investigation not only provides a deep insight into exploring the physical properties of doped nanocrystals, but also demonstrates a useful synthetic strategy for producing water-soluble and highly fluorescent doped

  20. Annotation Method (AM): SE7_AM1 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available base search. Peaks with no hit to these databases are then selected to secondary se...arch using exactMassDB and Pep1000 databases. After the database search processes, each database hits are ma...SE7_AM1 PowerGet annotation A1 In annotation process, KEGG, KNApSAcK and LipidMAPS are used for primary data

  1. On the reversibility window in binary As-Se glasses

    Energy Technology Data Exchange (ETDEWEB)

    Golovchak, R. [Lviv Scientific Research Institute of Materials of SRC ' Carat' , 202 Stryjska str., Lviv UA-79031 (Ukraine); Institute of Physics of Jan Dlugosz University, 13/15 al. Armii Krajowej, Czestochowa PL-42201 (Poland); Faculty of Physics of Opole University of Technology, 75 Ozimska str., Opole PL-45370 (Poland); Shpotyuk, O. [Lviv Scientific Research Institute of Materials of SRC ' Carat' , 202 Stryjska str., Lviv UA-79031 (Ukraine); Institute of Physics of Jan Dlugosz University, 13/15 al. Armii Krajowej, Czestochowa PL-42201 (Poland)], E-mail: shpotyuk@novas.lviv.ua; Kozdras, A. [Faculty of Physics of Opole University of Technology, 75 Ozimska str., Opole PL-45370 (Poland)

    2007-10-29

    Physical ageing effects caused by prolonged natural storage are recorded for binary As{sub x}Se{sub 1-x} glasses with 0.2{<=}x<0.4. Their origin is associated with pure 'shrinkage' of under-constrained glass networks. It is shown that only stoichiometric As{sub 2}Se{sub 3} composition, which network is formed by a so-called self-organized phase, possesses the ideal non-ageing ability.

  2. Se aprende poco : ¿Qué podemos hacer?

    OpenAIRE

    Quinquer, Dolors

    2006-01-01

    La situación en las aulas es más compleja, heterogénea y pluricultural que antes; las competencias que se han de desarrollar se han diversificado, ahora son cognitivas, éticas y sociales, mientras que los marcos organizativos siguen tan rígidos como siempre. En este contexto, comparando España con otros países, parece que los alumnos aprenden poco.¿Qué podemos hacer? 

  3. Annotation Method (AM): SE2_AM1 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available base search. Peaks with no hit to these databases are then selected to secondary se...arch using exactMassDB and Pep1000 databases. After the database search processes, each database hits are ma...SE2_AM1 PowerGet annotation A1 In annotation process, KEGG, KNApSAcK and LipidMAPS are used for primary data

  4. Annotation Method (AM): SE4_AM1 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available base search. Peaks with no hit to these databases are then selected to secondary se...arch using exactMassDB and Pep1000 databases. After the database search processes, each database hits are ma...SE4_AM1 PowerGet annotation A1 In annotation process, KEGG, KNApSAcK and LipidMAPS are used for primary data

  5. Annotation Method (AM): SE9_AM1 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available base search. Peaks with no hit to these databases are then selected to secondary se...arch using exactMassDB and Pep1000 databases. After the database search processes, each database hits are ma...SE9_AM1 PowerGet annotation A1 In annotation process, KEGG, KNApSAcK and LipidMAPS are used for primary data

  6. Annotation Method (AM): SE3_AM1 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available base search. Peaks with no hit to these databases are then selected to secondary se...arch using exactMassDB and Pep1000 databases. After the database search processes, each database hits are ma...SE3_AM1 PowerGet annotation A1 In annotation process, KEGG, KNApSAcK and LipidMAPS are used for primary data

  7. Annotation Method (AM): SE6_AM1 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available base search. Peaks with no hit to these databases are then selected to secondary se...arch using exactMassDB and Pep1000 databases. After the database search processes, each database hits are ma...SE6_AM1 PowerGet annotation A1 In annotation process, KEGG, KNApSAcK and LipidMAPS are used for primary data

  8. Annotation Method (AM): SE1_AM1 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available base search. Peaks with no hit to these databases are then selected to secondary se...arch using exactMassDB and Pep1000 databases. After the database search processes, each database hits are ma...SE1_AM1 PowerGet annotation A1 In annotation process, KEGG, KNApSAcK and LipidMAPS are used for primary data

  9. Annotation Method (AM): SE8_AM1 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available base search. Peaks with no hit to these databases are then selected to secondary se...arch using exactMassDB and Pep1000 databases. After the database search processes, each database hits are ma...SE8_AM1 PowerGet annotation A1 In annotation process, KEGG, KNApSAcK and LipidMAPS are used for primary data

  10. Annotation Method (AM): SE5_AM1 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available base search. Peaks with no hit to these databases are then selected to secondary se...arch using exactMassDB and Pep1000 databases. After the database search processes, each database hits are ma...SE5_AM1 PowerGet annotation A1 In annotation process, KEGG, KNApSAcK and LipidMAPS are used for primary data

  11. Det monstrøse i Ezekiels vision

    DEFF Research Database (Denmark)

    Nielsen, Kirsten

    2011-01-01

    Artiklen viser, hvordan det monstrøse introduceres i Ezekiels Bog kap. 1 i form af nogle sammensatte levende væsener, der har træk hentet fra både menneske- og dyreverdenen. Det monstrøse består i denne overskridelse af de gængse grænser og problematiserer dermed de velkendte klassifikationer. Og...

  12. 75Se-labelled cortisol in analysis by competition

    International Nuclear Information System (INIS)

    Glover, J.S.; Chambers, V.E.M.

    1975-01-01

    Selenium 75 has nuclear properties very suitable for the labelling of steroids used as tracers in competition analysis. A method of preparing a selenium-labelled cortisol derivative, 75 Se methylselenoprednisolone, is described. A system based on bonding competition between plasma cortisol and 75 Se methylselenoprednisolone on transcortine was studied, the separation taking place on a Sephadex adsorbant. An early analysis with highly stable reagents was achieved [fr

  13. de drogas que se consumen en su medio

    Directory of Open Access Journals (Sweden)

    José F. Enríquez Bielma

    2006-01-01

    Full Text Available Las adicciones son un problema de salud pública. Se estima que en México 3.5 millones de personas entre 12 a los 65 años han consumido algún tipo de drogas. A pesar de los avances en los estudios, se ha dejado de lado el carácter cultural que tiene la adicción. Con este estudio, se deseba conocer qué saben los estudiantes de segundo de secundaria sobre cuáles son las drogas que se consumen en su medio. Se llevó a cabo un estudio observacional con un muestreo aleatorio, con múltiples etapas y proporcional al tamaño en escuelas públicas y privadas. En total se estudiaron 42 escuelas del municipio de León, Gto., México de las cuales el 76.2% lo conformaron las escuelas públicas y el resto las escuelas privadas. Refirieron que conocen que se consumen, en su medio, 11 tipos de drogas. El 88% mencionó a la cocaína en primer lugar, en segundo lugar con un 85% la marihuana, siguiendo las tachas en un 62% y el pegamento en un 49%. En cuanto a los nombres que los estudiantes le dan a las drogas, estos van desde 23 hasta los 4 nombres, siendo la marihuana a la que se le da el mayor número de nombres, seguidos de la cocaína y el éxtasis.

  14. Synthesis and biodistribution of 75Se-dinonyl-diselenide

    International Nuclear Information System (INIS)

    Liu, Y.F.; Qian, H.Q.; Zhang, Q.X.; Wang, X.Y.; Sun, J.G.; Li, B.Z.; Zhang, W.J.

    1985-01-01

    Selenium-75-labelled dinonyl-diselenide, C 9 H 19 75 SeSeC 9 H 19 , was synthesized and identified. It was injected into white rats in order to observe the selenium distribution in the tissues using inorganic 75 SeO 2 as the control agent. The sequence order of the 75 Se-dinonyl-diselenide uptake by tissues was: pancreas, muscles, stomach, liver, kidneys, spleen, blood, lungs, heart, brain, eyes. A very high accumulation of 75 Se-dinonyl-diselenide in the pancreas was observed, similar to that of the pancreatic imaging agent 75 Se-methionine. Furthermore, the enzymatic activity of glutathione peroxidase in the case of organic diselenide injection was higher than that measured for selenite. Selenium of dinonyl-diselenide was more effective and retainable in the process of converting itself to selenium-containing enzyme via the metabolic reactions. It may be advisable to replace inorganic sodium selenite by organic selenium compounds. Sodium selenite has been widely used in the prevention of the Keshan disease in China. (author)

  15. Identification QTLs Controlling Genes for Se Uptake in Lentil Seeds.

    Directory of Open Access Journals (Sweden)

    Duygu Ates

    Full Text Available Lentil (Lens culinaris Medik. is an excellent source of protein and carbohydrates and is also rich in essential trace elements for the human diet. Selenium (Se is an essential micronutrient for human health and nutrition, providing protection against several diseases and regulating important biological systems. Dietary intake of 55 μg of Se per day is recommended for adults, with inadequate Se intake causing significant health problems. The objective of this study was to identify and map quantitative trait loci (QTL of genes controlling Se accumulation in lentil seeds using a population of 96 recombinant inbred lines (RILs developed from the cross "PI 320937" × "Eston" grown in three different environments for two years (2012 and 2013. Se concentration in seed varied between 119 and 883 μg/kg. A linkage map consisting of 1,784 markers (4 SSRs, and 1,780 SNPs was developed. The map spanned a total length of 4,060.6 cM, consisting of 7 linkage groups (LGs with an average distance of 2.3 cM between adjacent markers. Four QTL regions and 36 putative QTL markers, with LOD scores ranging from 3.00 to 4.97, distributed across two linkage groups (LG2 and LG5 were associated with seed Se concentration, explaining 6.3-16.9% of the phenotypic variation.

  16. Preparation and characterization of polycrystalline n-CdSe photoelectrode

    Energy Technology Data Exchange (ETDEWEB)

    Bandyopadhyay, T. K.

    1979-01-01

    Thin layers of polycrystalline p-CdSe were prepared by the simultaneous eletrodeposition of cadmium and selenium from cadmium sulfate and selenious acid in a sulfuric acid solution at pH 0-1 on a titanium substrate. The adherence of the layers to the substrate, stoichiometric ratio of Cd:Se and photovoltaic property of the film depend upon the molar ratio of CdSO/sub 4/ and H/sub 2/SeO/sub 3/ and current density as well as on the pH and temperature of the electrolysis bath. On increasing the current density or the ratio of CdSO/sub 4/:H/sub 2/SeO/sub 3/ in the electrolysis bath, the Cd:Se of the electrodeposit increased. The semiconductor films so prepared were annealed at 550/sup 0/C in a nitrogen atmosphere, followed by etching in an acid solution and then used to construct the photo-electrochemical cell, Ti/CdSe/Na/sub 2/S-Na/sub 2/S/sub x/(aq.)/Pt, and the current-voltage curves have been studied. 11 references.

  17. Structural manifestations of aging in Se-rich glasses

    Science.gov (United States)

    Dash, S.; Ravindren, S.; Chen, P.; Boolchand, P.

    2015-03-01

    We examine weakly cross-linked GexSe100-x (0%modulated DSC and Raman scattering experiments. Homogeneity of melts was carefully verified using FT-Raman line profiling. Upon aging at RT for 4 months, we find the width of the glass transition W(x) steadily decreasing from 10C at 7% Ge to 2C for pure Se. The 5-fold reduction of W(x) with a decrease of Ge content is accompanied by a 2-fold increase in the non-reversing enthalpy. Rejuvenation of the aged glasses changes W(x) from 15C at 7% Ge to 7C for pure Se. Tg is found to decrease upon rejuvenation with the difference (Tg(aged)-Tg(rejuv)) showing a maximum near 3% Ge and vanishing for pure Se and 6% of Ge, which are topological thresholds. These results in Se-rich glasses are consistent with aging induced decoupling of Se8 crowns and growth of extended range structural correlations between polymeric Sen chains due to lone pair interactions. At higher x, near 8-10% of Ge, eutectic effects are manifested. Work supported by NSF Grant DMR 08-53957.

  18. Agentive reflexive clitics and transitive 'se' constructions in Spanish

    Directory of Open Access Journals (Sweden)

    Grant Armstrong

    2013-11-01

    Full Text Available This paper investigates the structure of transitive sentences that contain a non-doubling reflexive clitic such as Juan se lavó todos los platos and María se leyó un libro. Though these are traditionally labelled unselected (non-core agreeing datives or aspectual datives, I argue that this label obscures a relevant difference between two classes of constructions. agentive reflexive clitic (= ARC constructions are characterized by a uniform set of effects on the external argument (= it must be an agent and the aspectual interpretation of the VP (= it must be an accomplishment. On the other hand, transitive se clitic (= TSC constructions do not impose any type of uniform restrictions on the kind of external argument they take or on the aspectual interpretation of the VP. I propose that the difference between these two constructions may be captured by treating se in the ARC construction as the realization of a special vDO head, based on an idea in Folli & Harley (2005, while se in the TSC construction is generated in the complement position of the verb and incorporates into V, forming a complex predicate, following work by De Cuyper (2006, MacDonald (2004, 2008 and MacDonald & Huidobro (2010. It is shown that many of the empirical and theoretical disagreements that plague the literature on the role of non-doubling se in transitive sentences have a simple solution given the new division established here

  19. Benefits of raising crops and animals naturally enriched with selenium in areas with selenium deficiency

    International Nuclear Information System (INIS)

    Dzhudich, I.S.

    2008-01-01

    Selenium (Se) is implicated in the protection of body tissues against oxidative stress, maintenance of defences against infection, and modulation of growth and development. The natural environment has a profound influence on its contents in the food chain and the development and distribution of Se responsive diseases. To overcome the Se deficiency problem and assure safe and adequate Se intakes, different methods were developed. Its efficiency depends on Se compounds absorption, its nutritional availability, long-term retention, convertibility of tissue Se stores into biologically active forms and the history of Se nutrition, influencing the proportion of absorbed retained, or excreted Se from diet. Since the dominant metabolically active Se forms are found in proteins as seleno analogues of sulphur amino acids, rather than selenotrisulphides and other acid labile Se compounds, we developed our own procedure for foliar enrichment of crops with Se, enabling the production of crops and animals with adequate Se content in low Se areas. By foliar application of Se salts, we optimize Se contents of many parameters important for plants quality, thus contributing to the better status of many essential, in diet often deficient nutrients. The utilization of these crops in animal nutrition, contributes to the nutritive value of animal products not only due to adequate Se content, but also higher values of other quality parameters. Consumption of such produced crops and animal products by humans in areas with low dietary Se intake has shown to have significant overall health benefits

  20. NaviSE: superenhancer navigator integrating epigenomics signal algebra.

    Science.gov (United States)

    Ascensión, Alex M; Arrospide-Elgarresta, Mikel; Izeta, Ander; Araúzo-Bravo, Marcos J

    2017-06-06

    Superenhancers are crucial structural genomic elements determining cell fate, and they are also involved in the determination of several diseases, such as cancer or neurodegeneration. Although there are pipelines which use independent pieces of software to predict the presence of superenhancers from genome-wide chromatin marks or DNA-interaction protein binding sites, there is not yet an integrated software tool that processes automatically algebra combinations of raw data sequencing into a comprehensive final annotated report of predicted superenhancers. We have developed NaviSE, a user-friendly streamlined tool which performs a fully-automated parallel processing of genome-wide epigenomics data from sequencing files into a final report, built with a comprehensive set of annotated files that are navigated through a graphic user interface dynamically generated by NaviSE. NaviSE also implements an 'epigenomics signal algebra' that allows the combination of multiple activation and repression epigenomics signals. NaviSE provides an interactive chromosomal landscaping of the locations of superenhancers, which can be navigated to obtain annotated information about superenhancer signal profile, associated genes, gene ontology enrichment analysis, motifs of transcription factor binding sites enriched in superenhancers, graphs of the metrics evaluating the superenhancers quality, protein-protein interaction networks and enriched metabolic pathways among other features. We have parallelised the most time-consuming tasks achieving a reduction up to 30% for a 15 CPUs machine. We have optimized the default parameters of NaviSE to facilitate its use. NaviSE allows different entry levels of data processing, from sra-fastq files to bed files; and unifies the processing of multiple replicates. NaviSE outperforms the more time-consuming processes required in a non-integrated pipeline. Alongside its high performance, NaviSE is able to provide biological insights, predicting cell

  1. Achieving tunable doping of MoSe2 based devices using GO@MoSe2 heterostructure

    Science.gov (United States)

    Maji, Tuhin Kumar; Tiwary, Krishna Kanhaiya; Karmakar, Debjani

    2017-05-01

    Doping nature of MoSe2, one of the promising Graphene analogous device material, can be tuned by controlling the concentration of functional groups in Graphene oxide (GO)@MoSe2 heterostructure. In this study, by first-principles simulation, we have observed that GO can be used as a carrier injection layer for MoSe2, where n or p type carriers are introduced within MoSe2 layer depending on the type and concentration of functional moieties in it. Both n and p-type Schottky barrier height modulations are investigated for different modeled configurations of the heterostructure. This combinatorial heterostructure can be a promising material for future electronic device application.

  2. Ocorrência de Achatina fulica no Vale do Paraíba, Estado do Rio de Janeiro, Brasil Occurrence of Achatina fulica in the Vale do Paraíba, Rio de Janeiro state, Brazil

    Directory of Open Access Journals (Sweden)

    Maurício Carvalho de Vasconcellos

    2001-12-01

    Full Text Available Registrou-se no município de Resende, Estado do Rio de Janeiro, Brasil, a primeira ocorrência do molusco Achatina fulica hospedeiro intermediário de Angiostrongylus cantonensis, causador da angiostrongilíase meningoencefálica. Em cinco bairros visitados, foram encontrados moluscos vivendo livremente, e nenhum dos animais coletados apresentava a forma larvar do parasito. A presença de A. fulica pode estar relacionada à comercialização desse molusco como alimento, e representa possibilidade de instalação dessa zoonose na região.The first occurrence of the Achatina fulica, an intermediate host of Angiostrongylus cantonensis, the etiological agent of meningoencephalic angiostrongiliasis, is reported in Resende municipality, Brazil. In the five visited localities, snails were found living freely, and the larvae of this parasite was not seen in any of them. The finding of A. fulica in the area may be related to its commercialization as a food item and embodies the possibility of new focus.

  3. Optical characterization of CdSe/ZnTe type-II interfaces for photovoltaics

    Energy Technology Data Exchange (ETDEWEB)

    Richters, Jan-Peter; Bleuse, Joel [CEA-CNRS group ' ' Nanophysique et semiconducteurs' ' , CEA-Grenoble, INAC, SP2M, 17 rue des Martyrs, 38042 Grenoble (France); Gerard, Lionel; Andre, Regis [CEA-CNRS group ' ' Nanophysique et semiconducteurs' ' , Institut Neel, CNRS, BP 166, 38042 Grenoble Cedex 9 (France)

    2012-07-01

    Solar cells based on direct bandgap semiconductors (GaAs,CdTe,CdSe..) show an efficient light absorption compared to silicon solar cells. This is an advantage for material savings due to thinner absorbers, but it also comes with the drawback of higher losses due to efficient radiative electron-hole recombination. Such losses could be prevented through the use of type-II interfaces which separate electrons and holes within the active area, similar to a p-n junction. We report a study of CdSe/ZnTe samples showing such an interface. The CdSe bandgap (1.7 eV) is well adapted to the solar spectrum and its lattice parameter mismatch with ZnTe is exceptionally low. We have grown, by MBE, different kinds of samples like CdSe/ZnTe 2D interfaces and superlattices and present time-resolved spectroscopy results which specify the efficiency of the electron-hole separation in these type-II structures. The measured decay time can be above 100 ns for the interface optical transition, i.e. 3 orders of magnitude slower than the typical PL decay time for the constitutive materials taken separately.

  4. High resistivity ZnSe coated substrates for microstrip gas chambers

    International Nuclear Information System (INIS)

    Sudharsanan, R.; Greenwald, A.C.; Vakerlis, G.; Yoganathan, M.; Cho, H.S.; Kadyk, J.; Dubeau, J.; Dixit, M.

    1998-01-01

    Microstrip gas chambers (MSGCs) require substrates with sheet resistance in the range of 10 13 --10 16 ohms/square to eliminate polarization and surface charging effects between the electrodes. Thin films of II-VI semiconductors deposited on glass or plastic substrates are attractive for this application since bulk resistivity of these semiconductors vary in the range 10 9 --10 12 ohm-cm and films with good uniformity can be deposited over large-areas using inexpensive deposition techniques. In this paper, deposition, characterization, and fabrication of MSGCs using ZnSe thin films are reported for the first time. ZnSe thin films were deposited on glass and plastic substrates by thermal evaporation. Sheet resistance of ZnSe varied in the range of 10 15 to 10 16 ohms/square depending on the deposition conditions. A MSGC detector fabricated using a 0.5 microm thick ZnSe layer on glass substrate exhibited best values; gas gain of 25,000 and an energy resolution of about 16.7% FWHM at a gain of 1,080 for a 55 Fe source

  5. Open hydrological data at hypeweb.smhi.se

    Science.gov (United States)

    Arheimer, Berit; Strömbäck, Lena; Andersson, Jafet; Donnelly, Chantal; Gustafsson, David; Pechlivianidis, Ilias; Strömqvist, Johan

    2016-04-01

    Following the EU open data strategy the Swedish Meteorological and Hydrological Institute (SMHI) is providing large parts of the databases openly available. These data are ranging from historical observations to climate predictions in various areas such as weather, oceanography and hydrology. For the Water Service called Hypeweb (www.hypeweb.smhi.se), we provide data for water management. So far, the data has been used in: (i) Climate change impact assessments on water resources and dynamics; (ii) The European Water Framework Directive (WFD) for characterization and development of measure programs to improve the ecological status of water bodies; (iii) Design variables for infrastructure constructions; (iv) Spatial water-resource mapping; (v) Operational forecasts (1-10 days and seasonal) on floods and droughts; (vi) Input to oceanographic models for operational forecasts and marine status assessments; and (vii) Research. The data of Hypeweb is based on other open data sources that has been merged and re-purposed by using the Hydrological Predictions for the Environment (HYPE) model in world-wide applications with high resolution. HYPE is a dynamic, semi-distributed, process-based, and integrated catchment model. So far, the following regional domains have been modelled with different resolutions (number of subbasins within brackets): Sweden (37 000), Europe (35 000), Arctic basin (30 000), La Plata River (6 000), Niger River (800), Middle-East North-Africa (31 000), and the Indian subcontinent (6 000). The web site provides several interactive applications for exploring results from the models. The user can explore an overview of various water variables for historical and future conditions. Moreover the user can explore and download historical time series of discharge for each basin and explore the performance of the model towards observed river flow. The presentation will give an overview of the functionality of the web site and the available hydrological

  6. Liquidus Projection and Isothermal Section of the Sb-Se-Sn System

    Science.gov (United States)

    Chang, Jui-shen; Chen, Sinn-wen

    2017-12-01

    Sb-Se-Sn ternary alloys are promising chalcogenide materials. The liquidus projection and 673.2 K (400 °C) isothermal section of the Sb-Se-Sn ternary system are determined. Numerous Sb-Se-Sn alloys are prepared, and their primary solidification phases are examined. In addition to the three terminal phases, (Sb), (Se) and (Sn), there are Sb2Sn3, SbSn, SnSe, SnSe2, Sb2Se3, Sn2Sb9Se9, and SnSb2Se4 phases. In addition, there are two miscibility gaps along the Sb-Se and Se-Sn and sides. There are ten invariant reactions in the Sb-Se-Sn ternary system, and seven of them are experimentally determined in this study. The lowest reaction temperature of determined invariant reaction is L + SbSn = (Sn) + SnSe at 515.4 K ± 5 K (242.2 °C ± 5 °C). There are nine tie-triangles, which are Liquid + SbSn + SnSe, SbSn + SnSe + (Sb), SnSe + (Sb) + Sn2Sb9Se9, (Sb) + Sb2Se3 + Sn2Sb9Se9, SnSe + Sn2Sb9Se9 + SnSb2Se4, Sb2Se3 + Sn2Sb9Se9 + SnSb2Se4, SnSe + SnSe2 + SnSb2Se4, SnSe2 + SnSb2Se4 + Sb2Se3, and SnSe2 + Sb2Se3 + Liquid in the 673.2 K (400 °C) isothermal section of the Sb-Se-Sn ternary system.

  7. Banks offer SE more than it asked for

    International Nuclear Information System (INIS)

    Janoska, J.

    2004-01-01

    About a year ago, when new management took over the financial department of Slovenske elektrarne (SE), a.s. the company was in crisis. It faced an acute cash-flow deficit and due loans of over 20 bill. Sk (501.21 mil. Eur). SE could not provide adequate guarantees for the required loans and without state guarantees it was virtually impossible or too expensive to obtain additional loans. But last week the situation changed for the better. Despite the fact that due to the restructuring of SE's loan portfolio, the company will pay the banks 3 bill. Sk (75.18 mil. Eur) less interest over the next three years than under the original arrangements, even the bakers seemed satisfied. A loan portfolio full of non-standard agreements signed with about 30 banks had previously prevented decisions regarding the structure of the company's assets and liabilities.The cabinet refused to admit that SE was in crisis and offered SE for sale, although it could not be privatised due to its debt structure and the fact that it was close to default. Despite this unfavourable situation, company economists decided to make an offensive move -in cooperation with a small group of banks they converted the tens of company loan agreements into a new loan package that will be simpler, cheaper, and with longer maturity periods, which will not require state guarantees. SE managed to restructure debts with a total value of 550 mil. Eur and until these transactions are completed the banks offered SE a bridge loan of 110 mil. Eur. The transaction related to a syndicated loan of 350 mil. Eur which was concluded in April. Eurobonds with a total value of 200 mil. Eur were issued two months later. The banks offered the company more than it requested. Demand for the Eurobond issue exceeded the 200 mil. Eur of bonds on offer. (author)

  8. Distopie voor oë: Eben Venter se duister kuns

    Directory of Open Access Journals (Sweden)

    Harry Sewlall

    2016-08-01

    Full Text Available Sedert die verskyning van Joseph Conrad se novelle, Heart of Darkness, uitgegee as vervolgverhaal in 1899, was daar al verskeie pogings om Conrad se teks te ‘herskryf’, al was die verwantskap met die meesterteks dikwels gering of selfs twyfelagtig. Nog ’n herskrywing van Conrad se teks is Eben Venter se roman Trencherman, aanvanklik in Afrikaans uitgegee as Horrelpoot. Hierdie teks volg die meesterteks baie nougeset na, nie slegs deur aanhalings daaruit as motto’s vooraan elke hoofstuk te gebruik nie, maar ook deur beelde en woorde uit die oorspronklike teks op ooglopende of bedekte wyse in die narratief in te weef. Die vrae waarmee ’n leser soos ek, wat nie vertroud is met Afrikaans nie, gekonfronteer word, is of dit ’n geval van plagiaat is of ’n oefening in intertekstualiteit en ofdie boek eerder ’n poging is om sensasie te wek ten einde meer boeke te verkoop. Hierdie vraevorm die basis vir ’n intertekstuele verkenning van die twee tekste, wat neerkom op ’n stiplees van Conrad se teks langs Trencherman ten einde die intertekstuele skakels tussen die twee tekste te identifiseer. Teoreties is die artikel gebaseer op die werk van Kristeva en Barthes. Die ondersoek het bevestig dat Trencherman inderdaad ’n oefening in intertekstualiteit is, nie slegs as intertekstualiteit nie, maar eerder as ’n in-gesprek-tree met Conrad se meesterteks. Daaruit volg die slotsom dat Trencherman ’n geldige intertekstuele antwoord is op Heart of darkness wat Conrad se beroemde novelle dekonstrueer en die draaiboek daarvan transponeer na ’n distopiese, post-demokratiese Suid-Afrika.

  9. Formation of a Colloidal CdSe and ZnSe Quantum Dots via a Gamma Radiolytic Technique

    Directory of Open Access Journals (Sweden)

    Aeshah Salem

    2016-09-01

    Full Text Available Colloidal cadmium selenide (CdSe and zinc selenide (ZnSe quantum dots with a hexagonal structure were synthesized by irradiating an aqueous solution containing metal precursors, poly (vinyl pyrrolidone, isopropyl alcohol, and organic solvents with 1.25-MeV gamma rays at a dose of 120 kGy. The radiolytic processes occurring in water result in the nucleation of particles, which leads to the growth of the quantum dots. The physical properties of the CdSe and ZnSe nanoparticles were measured by various characterization techniques. X-ray diffraction (XRD was used to confirm the nanocrystalline structure, energy-dispersive X-ray spectroscopy (EDX was used to estimate the material composition of the samples, transmission electron microscopy (TEM was used to determine the morphologies and average particle size distribution, and UV-visible spectroscopy was used to measure the optical absorption spectra, from which the band gap of the CdSe and ZnSe nanoparticles could be deduced.

  10. ¿Qué se hace para no morir de hambre? Dinámicas domésticas y alimentación en la niñez en un área rural de extrema pobreza de México What to do to avoid death by starvation? Domestic dynamics and childhood feeding practices in a rural area of extreme poverty in Mexico

    Directory of Open Access Journals (Sweden)

    Blanca Pelcastre-Villafuerte

    2006-12-01

    Full Text Available OBJETIVO: Caracterizar y comparar, en términos de estructura, creencias y comportamiento en torno a la alimentación, la dinámica doméstica de hogares de niños y niñas menores de cinco años con y sin desnutrición. MATERIAL Y MÉTODOS: Estudio cualitativo con un diseño etnográfico basado en observación participante y entrevistas a profundidad a responsables del cuidado de menores e informantes clave bajo consentimiento informado verbal. El foco de observación fue el conjunto de prácticas relacionadas con el cuidado de los menores, con énfasis en las relacionadas con su alimentación, tanto al interior de los hogares como en la comunidad. Se realizaron dos estancias de campo, durante 2001, en tres comunidades rurales del Río Balsas, en el estado de Guerrero, México. RESULTADOS: Estructuras monoparentales, en etapa temprana del ciclo doméstico, generan condiciones que pueden propiciar la presencia de desnutrición de menores de cinco años. Las familias extensas representan, por su propia estructura, dinámicas domésticas más favorables. CONCLUSIONES: El problema de la desnutrición en ambientes de extrema pobreza resulta decisivamente influido por las estrategias nutricionales y las dinámicas sociales generadas en el interior de las familias.OBJECTIVE: To describe and compare household dynamics in terms of structure, beliefs and nutrition-related behavior in the homes of malnourished and well-nourished children less than five years of age. MATERIAL AND METHODS: The authors carried out a qualitative ethnographic study using participant observation, and in depth interviews. Interviews were conducted with the child's caretaker or key informants, prior oral informed consent. Child care and childhood feeding practices at home and in the community were the focus of observations. The study included two periods of field work conducted in 2001, in three rural municipalities from the Río Balsas region, in Guerrero state, Mexico. The

  11. After four months new privatisation committee in SE

    International Nuclear Information System (INIS)

    Janoska, J.

    2003-01-01

    In spite of a delay the Minister of Economy of the Slovak Republic wants to meet the schedule set by Government. In middle of September 2002 six prospect submitted their tender offers for entering Slovenske elektrarne (SE), a.s, Bratislava. Representative of privatisation advisor of SE, PricewaterhouseCoopers, Peter Mitka told TREND that he was in contact with the investors but they were waiting for a signal from official authorities about the current state of the tender. And they have been waiting for four months. Only last week a new privatisation commission started dealing with the offers. In spite of these facts Minister of Economy, Robert Nemcsics does not consider the process slow and said that the Ministry would use all its efforts to adhere to the original privatisation schedule prepared by the former government. He further added that everything would depend on the offers submitted. Investors are not interest in SE as a whole but only in its parts. Several members of the committee do not agree with the privatisation and restructuring principles set by the government including a split of SE to conventional and nuclear parts. One of the opponents is the former manager of SE Tibor Mikus (HZDS) - representative of the Parliament or Vladimir Mojs representative of Slovak Energeticists Unions. This put a brake on the tender and changes in the management of SE as well. Privatisation Agency FNM still has not decided upon calling a Extraordinary General Meeting of SE that would elect new bodies. Spokeswoman of FNM, Tatjana Lesajova claims that the Fund is still missing a legal analysis that would review the possibility of changing SE's Articles of Association so that the Board of Directors could be assigned based on a tender (proposal of the Ministry). Members of SE Privatisation Committee: Eva Simkova - Secretary of State, Ministry of Economy SR; Laszlo Pomothy - Secretary of State, Ministry of Economy SR; Henrich Herceg - Advisor to the Minister of Economy SR

  12. Gene expression of endoplasmic reticulum resident selenoproteins correlates with apoptosis in various muscles of se-deficient chicks.

    Science.gov (United States)

    Yao, Hai-Dong; Wu, Qiong; Zhang, Zi-Wei; Zhang, Jiu-Li; Li, Shu; Huang, Jia-Qiang; Ren, Fa-Zheng; Xu, Shi-Wen; Wang, Xiao-Long; Lei, Xin Gen

    2013-05-01

    Dietary selenium (Se) deficiency causes muscular dystrophy in various species, but the molecular mechanism remains unclear. Our objectives were to investigate: 1) if dietary Se deficiency induced different amounts of oxidative stress, lipid peroxidation, and cell apoptosis in 3 skeletal muscles; and 2) if the distribution and expression of 4 endoplasmic reticulum (ER) resident selenoprotein genes (Sepn1, Selk, Sels, and Selt) were related to oxidative damages in these muscles. Two groups of day-old layer chicks (n = 60/group) were fed a corn-soy basal diet (33 μg Se/kg; produced in the Se-deficient area of Heilongjiang, China) or the diet supplemented with Se (as sodium selenite) at 0.15 mg/kg for 55 d. Dietary Se deficiency resulted in accelerated (P muscles. All these responses were stronger in the pectoral muscle than in the thigh and wing muscles (P muscles. Expression of Sepn1, Sels, and Selt in these muscles was correlated with (r > 0.72; P muscle demonstrated unique expression patterns of the ER resident selenoprotein genes and GPx activity, along with elevated susceptibility to oxidative cell death, compared with the other skeletal muscles. These features might help explain why it is a primary target of Se deficiency diseases in chicks.

  13. ¿Y, cómo se hacen?

    Directory of Open Access Journals (Sweden)

    Juan Ruiz

    2015-01-01

    Full Text Available El mundo de los dibujos animados es producto de la imaginación, de la fantasía que vuela en los sueños de los hombres de cualquier edad. El artículo relata la forma en cómo estos simpáticos personajes, que vemos a diario en el cine o la televisión, pueden moverse tan libremente y con tanto desenfado. Se parte de la idea o argumento, el guionista narra la historia de lo que será el animado. Luego el director con un dibujante trazan las escenas principales de la historia (storyboard o guión dibujado se discute con los artistas y realizadores del filme; una vez aprobado este se perfila el diseño de los personajes, se realiza la escenografía (maquetas de ser necesario. Se hacen los parlamentos o diálogos de los personajes para que actores(as pongan las voces y sigue el proceso más fino y técnico.

  14. Transition probabilities in neutron-rich Se,8684

    Science.gov (United States)

    Litzinger, J.; Blazhev, A.; Dewald, A.; Didierjean, F.; Duchêne, G.; Fransen, C.; Lozeva, R.; Sieja, K.; Verney, D.; de Angelis, G.; Bazzacco, D.; Birkenbach, B.; Bottoni, S.; Bracco, A.; Braunroth, T.; Cederwall, B.; Corradi, L.; Crespi, F. C. L.; Désesquelles, P.; Eberth, J.; Ellinger, E.; Farnea, E.; Fioretto, E.; Gernhäuser, R.; Goasduff, A.; Görgen, A.; Gottardo, A.; Grebosz, J.; Hackstein, M.; Hess, H.; Ibrahim, F.; Jolie, J.; Jungclaus, A.; Kolos, K.; Korten, W.; Leoni, S.; Lunardi, S.; Maj, A.; Menegazzo, R.; Mengoni, D.; Michelagnoli, C.; Mijatovic, T.; Million, B.; Möller, O.; Modamio, V.; Montagnoli, G.; Montanari, D.; Morales, A. I.; Napoli, D. R.; Niikura, M.; Pollarolo, G.; Pullia, A.; Quintana, B.; Recchia, F.; Reiter, P.; Rosso, D.; Sahin, E.; Salsac, M. D.; Scarlassara, F.; Söderström, P.-A.; Stefanini, A. M.; Stezowski, O.; Szilner, S.; Theisen, Ch.; Valiente Dobón, J. J.; Vandone, V.; Vogt, A.

    2015-12-01

    Reduced quadrupole transition probabilities for low-lying transitions in neutron-rich Se,8684 are investigated with a recoil distance Doppler shift (RDDS) experiment. The experiment was performed at the Istituto Nazionale di Fisica Nucleare (INFN) Laboratori Nazionali di Legnaro using the Cologne Plunger device for the RDDS technique and the AGATA Demonstrator array for the γ -ray detection coupled to the PRISMA magnetic spectrometer for an event-by-event particle identification. In 86Se the level lifetime of the yrast 21+ state and an upper limit for the lifetime of the 41+ state are determined for the first time. The results of 86Se are in agreement with previously reported predictions of large-scale shell-model calculations using Ni78-I and Ni78-II effective interactions. In addition, intrinsic shape parameters of lowest yrast states in 86Se are calculated. In semimagic 84Se level lifetimes of the yrast 41+ and 61+ states are determined for the first time. Large-scale shell-model calculations using effective interactions Ni78-II, JUN45, jj4b, and jj4pna are performed. The calculations describe B (E 2 ;21+→01+) and B (E 2 ;61+→41+) fairly well and point out problems in reproducing the experimental B (E 2 ;41+→21+) .

  15. Electroluminescence of colloidal ZnSe quantum dots

    International Nuclear Information System (INIS)

    Dey, S.C.; Nath, S.S.

    2011-01-01

    The article reports a green chemical synthesis of colloidal ZnSe quantum dots at a moderate temperature. The prepared colloid sample is characterised by UV-vis absorption spectroscopy and transmission electron microscopy. UV-vis spectroscopy reveals as-expected blue-shift with strong absorption edge at 400 nm and micrographs show a non-uniform size distribution of ZnSe quantum dots in the range 1-4 nm. Further, photoluminescence and electroluminescence spectroscopies are carried out to study optical emission. Each of the spectroscopies reveals two emission peaks, indicating band-to-band transition and defect related transition. From the luminescence studies, it can be inferred that the recombination of electrons and holes resulting from interband transition causes violet emission and the recombination of a photon generated hole with a charged state of Zn-vacancy gives blue emission. Meanwhile electroluminescence study suggests the application of ZnSe quantum dots as an efficient light emitting device with the advantage of colour tuning (violet-blue-violet). - Highlights: → Synthesis of ZnSe quantum dots by a green chemical route. → Characterisation: UV-vis absorption spectroscopy and transmission electron microscopy. → Analysis of UV-vis absorption spectrum and transmission electron micrographs. → Study of electro-optical properties by photoluminescence and electroluminescence. → Conclusion: ZnSe quantum dots can be used as LED with dual colour emission.

  16. Optical studies of CdSe/PVA nanocomposite films

    Science.gov (United States)

    Kushwaha, Kamal Kumar; Ramrakhaini, Meera

    2018-05-01

    The nanocomposite films of CdSe nanocrystals in polyvinyl alcohol (PVA) matrix were synthesized by environmental friendly chemical method. These composites were characterized by X-ray diffraction which indicates the hexagonal crystalline structure of CdSe with crystal size up to a few nm. The crystal size is found to decrease by increasing PVA Concentration. The photoluminescence (PL) characteristics of these composite films with varying concentration of PVA as well as Cd2+ content have been investigated. The PL peak of CdSe was observed at 510 nm and higher intensity is observed by increasing PVA concentration without any change in position of PL peak. Due to proper passivation of surface states non-radiative transition are reduced which enhance the PL intensity. By increasing concentration of Cd2+ content in the CdSe/PVA nanocomposite films, smaller CdSe nanocrystals were obtained giving higher intensity and blue shift in the PL peak due to enhanced oscillator strength and quantum confinement effect. The PL peak in green and blue region makes these composite films promising materials for optical display devices. The Refractive index of these composites was also measured at sodium line with the help of Abee's refractometer and was found in the range of 2.20-2.45. It is seen that refractive index varies with polymer concentration. This may be useful for their potential application in anti-reflection coating, display devices and optical sensors.

  17. Diffusion behavior for Se and Zr in sodium-bentonite

    International Nuclear Information System (INIS)

    Sato, Haruo; Yui, Mikazu; Yoshikawa, Hideki

    1995-01-01

    Apparent diffusion coefficients for Se and Zr in bentonite were measured by in-diffusion method at room temperature using water-saturated sodium-bentonite, Kunigel V1 reg-sign containing 50wt% Na-smectite as a major mineral was used as the bentonite material. The experiments were carried out in the dry density range of 400--1,800 kg/m 3 . Bentonite samples were immersed with distilled water and saturated before the experiments. The experiments for Se were carried out under N 2 atmospheric condition (O 2 : 2.5ppm). Those for Zr were carried out under aerobic condition. The apparent diffusion coefficients decrease with increasing density of the bentonite. Since dominant species of Se in the pore water is predicted to be SeO 3 2- , Se may be retarded by anion-exclusion because of negative charge on the surface of the bentonite and little sorption. The dominant species of Zr in the porewater is predicted to be Zr(OH) 5 - or HZrO 3 - . Distribution coefficient measured for Zr on the bentonite was about 1.0 m 3 /kg from batch experiments. Therefore, the retardation may be caused by combination of the sorption and the anion-exclusion. A modeling for the diffusion mechanisms in the bentonite were discussed based on an electric double layer theory. Comparison between the apparent diffusion coefficients predicted by the model and the measured ones shows a good agreement

  18. Study of de-aggregation of mechanochemically synthesized ZnSe nanoparticles by re-milling in the presence of ZnCl2 solution

    Directory of Open Access Journals (Sweden)

    Marcela Achimovičová

    2013-12-01

    Full Text Available Conventional mechanochemical synthesis of zinc selenide, ZnSe nanoparticles was performed in a planetary ball mill by high-energy milling of zinc (Zn and selenium (Se powders. Mechanochemically synthesized ZnSe was subsequently re-milled in circulation mill in ZnCl2 solution in order to study de-aggregation, physical-chemical and optical properties of ZnSe nanoparticles. The mechanochemically synthesized and re-milled samples were characterized by X-ray diffraction analysis (XRD that confirmed the presence of cubic and hexagonal ZnSe phases. Size of crystallites calculated from XRD patterns has decreased from 50 to 19 nm for cubic ZnSe phase and from 145 to 2.5 nm for hexagonal ZnSe phase after re-milling for 110 min in ZnCl2 solution. Size, phase composition, morphology, and crystallinity of ZnSe nanoparticles were studied by transmission electron microscopy (TEM and selected area electron diffraction (SAED. UV-Vis optical spectroscopy has provided an evidence of blue shift of the re-milled nanocrystalline ZnSe particles from the direct band gap of 2.67 eV characteristic of bulk ZnSe crystals. Colloidal stability of ZnSe nanoparticles dispersions was studied by ? �potential measurements.

  19. Quasi-two-dimensional thermoelectricity in SnSe

    Science.gov (United States)

    Tayari, V.; Senkovskiy, B. V.; Rybkovskiy, D.; Ehlen, N.; Fedorov, A.; Chen, C.-Y.; Avila, J.; Asensio, M.; Perucchi, A.; di Pietro, P.; Yashina, L.; Fakih, I.; Hemsworth, N.; Petrescu, M.; Gervais, G.; Grüneis, A.; Szkopek, T.

    2018-01-01

    Stannous selenide is a layered semiconductor that is a polar analog of black phosphorus and of great interest as a thermoelectric material. Unusually, hole doped SnSe supports a large Seebeck coefficient at high conductivity, which has not been explained to date. Angle-resolved photoemission spectroscopy, optical reflection spectroscopy, and magnetotransport measurements reveal a multiple-valley valence-band structure and a quasi-two-dimensional dispersion, realizing a Hicks-Dresselhaus thermoelectric contributing to the high Seebeck coefficient at high carrier density. We further demonstrate that the hole accumulation layer in exfoliated SnSe transistors exhibits a field effect mobility of up to 250 cm2/V s at T =1.3 K . SnSe is thus found to be a high-quality quasi-two-dimensional semiconductor ideal for thermoelectric applications.

  20. Self-Assembled PbSe Nanowire:Perovskite Hybrids

    KAUST Repository

    Yang, Zhenyu

    2015-12-02

    © 2015 American Chemical Society. Inorganic semiconductor nanowires are of interest in nano- and microscale photonic and electronic applications. Here we report the formation of PbSe nanowires based on directional quantum dot alignment and fusion regulated by hybrid organic-inorganic perovskite surface ligands. All material synthesis is carried out at mild temperatures. Passivation of PbSe quantum dots was achieved via a new perovskite ligand exchange. Subsequent in situ ammonium/amine substitution by butylamine enables quantum dots to be capped by butylammonium lead iodide, and this further drives the formation of a PbSe nanowire superlattice in a two-dimensional (2D) perovskite matrix. The average spacing between two adjacent nanowires agrees well with the thickness of single atomic layer of 2D perovskite, consistent with the formation of a new self-assembled semiconductor nanowire:perovskite heterocrystal hybrid.

  1. Some kinetic properties of DySnSe2 combination

    International Nuclear Information System (INIS)

    Murguzov, M.I.; Mammadova, E.R.

    2008-01-01

    Recently, to the acquisition of multi-component alloys and combination in the presence of rare-earth metals (REM) interest has grown considerably. According to preliminary data, in the presence of rare-earth metals you can obtain perspective semiconductor materials which are of practical importance, and can be used in various fields of microelectronics in a complex system of chalcogenides. DySnSe 2 combination is also includes to this system. Physical peculiarities of these combinations have been studied in wide interval. DySnSe 2 combination crystallizes in ortho rhombic crystal system and is an indemnification n-type semiconductor material. The mechanism of electrical conductivity in DySnSe 2 semiconductor combination is complicated and cargo carrier scattering changes at low temperatures. That is why, the mixed type conductivity occurs

  2. Concentrations of Se, Ba, Zn and Mn in Brazil nuts

    Energy Technology Data Exchange (ETDEWEB)

    Armelin, Maria José A.; Maihara, Vera A.; Cardoso, Paulo S.; Saiki, Mitiko [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Cozollino, Silvia M.F., E-mail: marmelin@ipen.br, E-mail: vmaihara@ipen.br, E-mail: msaiki@ipen.br, E-mail: pscsilva@ipen.br, E-mail: smfcozzo@usp.br [Universidade de São Paulo (USP), SP (Brazil). Faculdade de Ciências Farmacêuticas

    2017-07-01

    The concentrations of Se, Ba, Zn and Mn were determined in samples of Brazil nuts collected in two ways: a) in a production farm predominantly for export and, b) in various points of sale from different regions of Brazil. Instrumental neutron activation analysis was the analytical technique used in this study. Results indicate that the concentrations of Se and Ba varied greatly among the Brazil nut samples analyzed. This large variability may be related to the soil characteristics from which the nuts were produced. An inverse correlation was observed between the concentrations of Se and Ba. On the other hand, the concentrations of Zn and Mn did not show significant differences among these samples. (author)

  3. PySE: Python Source Extractor for radio astronomical images

    Science.gov (United States)

    Spreeuw, Hanno; Swinbank, John; Molenaar, Gijs; Staley, Tim; Rol, Evert; Sanders, John; Scheers, Bart; Kuiack, Mark

    2018-05-01

    PySE finds and measures sources in radio telescope images. It is run with several options, such as the detection threshold (a multiple of the local noise), grid size, and the forced clean beam fit, followed by a list of input image files in standard FITS or CASA format. From these, PySe provides a list of found sources; information such as the calculated background image, source list in different formats (e.g. text, region files importable in DS9), and other data may be saved. PySe can be integrated into a pipeline; it was originally written as part of the LOFAR Transient Detection Pipeline (TraP, ascl:1412.011).

  4. Linkages between Icelandic Low position and SE Greenland winter precipitation

    Science.gov (United States)

    Berdahl, M.; Rennermalm, A. K.; Hammann, A. C.; Mioduszewski, J.; Hameed, S.; Tedesco, M.; Stroeve, J. C.; Mote, T. L.

    2015-12-01

    Greenland's largest flux of precipitation occurs in its Southeast (SE) region. An understanding of the mechanisms controlling precipitation in this region is lacking despite its disproportionate importance in the mass balance of Greenland and the consequent contributions to sea level rise. We use weather station data from the Danish Meteorological Institute to reveal the governing influences on precipitation in SE Greenland during the winter and fall. We find that precipitation in the fall is significantly correlated to the longitude of the Icelandic Low and the NAO. Winter precipitation is correlated with the strength and longitude of the Icelandic Low, as well as the NAO. We show that in years of extreme high precipitation, onshore winds dominate, thereby advecting more moisture inland. In low precipitation years, winds are more westerly, approaching the stations from land. Understanding the controls of SE Greenland precipitation will help us predict how future precipitation in this key region may change in a warming climate.

  5. SE and ENEL - One Year Together One Year after Privatization

    International Nuclear Information System (INIS)

    Anon

    2007-01-01

    In Bratislava, one year ago, exactly in April 28, the privatization deal of a 66% stake in Slovenske elektrarne (SE) was finally closed. The Slovak government and the Italian company ENEL signed final documents and ENEL thus definitely entered into SE. In May 2006, Miroslav Pikus, a former CEO, was replaced by Marco Arcelli, who, as a regional manager for Slovakia, had been preparing the entry of ENEL into SE since March 2005. Not only did he sometimes cook for us, in his 'kitchen' but also there were prepared 160 investment projects, e.g the improvement of nuclear safety and resistance of the Bohunice power plant, electricity sale through the so-called 'virtual power plant', ensuring a non-attended operation in hydro power plants, reconstruction and modernization of the Orava and Dobsina hydro power plants. (author)

  6. Teoria feminista: o desafio de tornar-se um paradigma

    Directory of Open Access Journals (Sweden)

    Mirian Santos Paiva

    1997-12-01

    Full Text Available Partindo da crise do paradigma tradicional e tendo como epicentro a crítica feminista, este trabalho tenta mostrar o desafio que enfrenta a teoria feminista para tornar-se um novo paradigma e para tanto realiza-se uma pesquisa bibliográfica, consubstanciada na literatura pertinente ao tema. Evidencia-se que o desafio de ser um paradigma em ascensão faz com que esta teoria enfrente problemas teóricos, conceituais e metodológicos que precisam de um esforço conjunto para serem aprofundados e resolvidos. Todavia, o desenvolvimento desta teoria não depende apenas do mundo acadêmico, mas está também atrelado a mudanças na estrutura social, pois, de uma sociedade mais igualitária, mais facilmente emergirá um conhecimento sem dominação de gênero.

  7. Concentrations of Se, Ba, Zn and Mn in Brazil nuts

    International Nuclear Information System (INIS)

    Armelin, Maria José A.; Maihara, Vera A.; Cardoso, Paulo S.; Saiki, Mitiko; Cozollino, Silvia M.F.

    2017-01-01

    The concentrations of Se, Ba, Zn and Mn were determined in samples of Brazil nuts collected in two ways: a) in a production farm predominantly for export and, b) in various points of sale from different regions of Brazil. Instrumental neutron activation analysis was the analytical technique used in this study. Results indicate that the concentrations of Se and Ba varied greatly among the Brazil nut samples analyzed. This large variability may be related to the soil characteristics from which the nuts were produced. An inverse correlation was observed between the concentrations of Se and Ba. On the other hand, the concentrations of Zn and Mn did not show significant differences among these samples. (author)

  8. Optics of colloidal quantum-confined CdSe nanoscrolls

    Energy Technology Data Exchange (ETDEWEB)

    Vasiliev, R B; Sokolikova, M S [M. V. Lomonosov Moscow State University, Moscow (Russian Federation); Vitukhnovskii, A G; Ambrozevich, S A; Selyukov, A S; Lebedev, V S [P N Lebedev Physics Institute, Russian Academy of Sciences, Moscow (Russian Federation)

    2015-09-30

    Nanostructures in the form of 1.2-nm-thick colloidal CdSe nanoplatelets rolled into scrolls are investigated. The morphology of these scrolls is analysed and their basic geometric parameters are determined (diameter 29 nm, longitudinal size 100 – 150 nm) by TEM microscopy. Absorption and photoluminescence spectra of these objects are recorded, and the luminescence decay kinetics is studied. It is shown that the optical properties of CdSe nanoscrolls differ significantly from the properties of CdSe quantum dots and that these nanoscrolls are attractive for nanophotonic devices due to large oscillator strengths of the transition, small widths of excitonic peaks and short luminescence decay times. Nanoscrolls can be used to design hybrid organic–inorganic pure-color LEDs with a high luminescence quantum yield and low operating voltages. (optics and technology of nanostructures)

  9. Self-Assembled PbSe Nanowire:Perovskite Hybrids

    KAUST Repository

    Yang, Zhenyu; Yassitepe, Emre; Voznyy, Oleksandr; Janmohamed, Alyf; Lan, Xinzheng; Levina, Larissa; Comin, Riccardo; Sargent, Edward H.

    2015-01-01

    © 2015 American Chemical Society. Inorganic semiconductor nanowires are of interest in nano- and microscale photonic and electronic applications. Here we report the formation of PbSe nanowires based on directional quantum dot alignment and fusion regulated by hybrid organic-inorganic perovskite surface ligands. All material synthesis is carried out at mild temperatures. Passivation of PbSe quantum dots was achieved via a new perovskite ligand exchange. Subsequent in situ ammonium/amine substitution by butylamine enables quantum dots to be capped by butylammonium lead iodide, and this further drives the formation of a PbSe nanowire superlattice in a two-dimensional (2D) perovskite matrix. The average spacing between two adjacent nanowires agrees well with the thickness of single atomic layer of 2D perovskite, consistent with the formation of a new self-assembled semiconductor nanowire:perovskite heterocrystal hybrid.

  10. Intercalation compounds of NbSe2 und SnSe2. Model systems for low-dimensional superconductors

    International Nuclear Information System (INIS)

    Herzinger, Michael

    2013-01-01

    Quasi-two-dimensional (2D) metal dichalcogenides have received considerable research interest since their complex anisotropic electronic properties can be controlled by the intercalation of donor species. Although layered dichalcogenides have been studied by many aspects of chemical and physical properties, their two-dimensional character is only poorly understood. The present work deals with the layer-shaped dichalcogenides SnSe 2 and NbSe 2 . The host-material SnSe 2 was synthesized by chemical transport with Iodine as transport agent in sealed quartz ampoules. The intercalation of the semiconducting layered single crystals SnSe 2 with the organometallic compound cobaltocene (CoCp 2 ) leads to superconductivity up to T = 8 K. Ex-situ intercalation studies show an intercalation-mechanism outgoing from the host material 2H-SnSe 2 in a stage-2 phase which goes over in a stage-1 phase for higher intercalation degrees. In addition, SnSe 2 {CoCp 2 } x show remarkable low-temperature properties e.g. the coexistence of superconductivity and magnetism in dependence of the staging and cobaltocene-content of the material. Starting from an intercalation degree of 17% CoCp 2 long range ordered magnetism (with increasing saturation magnetization) was observed in 18R-SnSe 2 {CoCp 2 } x . Furthermore SnSe 2 {CoCp 2 } x show an extremely sensitive superconducting pinning behavior in very small magnetic fields partially below B 2 -content. A phase diagram was developed in dependence of the degree of intercalation over the whole range of intercalation between 0 % and 33 %. For comparison of the low-temperature character of SnSe 2 {CoCp 2 } x , another layer-shaped superconductor NbSe 2 was intercalated with CoCp 2 . The layered high-k s-wave superconductor 2H-NbSe 2 belongs to the most prominent low-dimensional materials studied during the past fifty years. After the discovery of the high temperature superconductor MgB 2 , a benchmark system for multi-band superconductivity, NbSe 2

  11. Loss mechanisms in hydrazine-processed Cu2ZnSn(Se,S)4 solar cells

    Science.gov (United States)

    Gunawan, Oki; Todorov, Teodor K.; Mitzi, David B.

    2010-12-01

    We present a device characterization study for hydrazine-processed kesterite Cu2ZnSn(Se,S)4 (CZTSSe) solar cells with a focus on pinpointing the main loss mechanisms limiting device efficiency. Temperature-dependent study and time-resolved photoluminescence spectroscopy on these cells, in comparison to analogous studies on a reference Cu(In,Ga)(Se,S)2 (CIGS) cell, reveal strong recombination loss at the CZTSSe/CdS interface, very low minority-carrier lifetimes, and high series resistance that diverges at low temperature. These findings help identify the key areas for improvement of these CZTSSe cells in the quest for a high-performance indium- and tellurium-free solar cell.

  12. High-energy γ-irradiation effect on physical ageing in Ge-Se glasses

    International Nuclear Information System (INIS)

    Golovchak, R.; Kozdras, A.; Kozyukhin, S.; Shpotyuk, O.

    2009-01-01

    Effect of Co 60 γ-irradiation on physical ageing in binary Ge x Se 100-x glasses (5 ≤ x ≤ 27) is studied using conventional differential scanning calorimetry method. It is shown, that high-energy irradiation leads to additional increase in the glass transition temperature and endothermic peak area near the glass transition region over the one induced by isochronal storage of these glasses at normal conditions. This γ-induced physical ageing is shown to be well-pronounced in Se-rich glasses (x < 20), while only negligible changes are recorded for glasses of 20 ≤ x ≤ 27 compositions. The effect under consideration is supposed to be associated with γ-activated structural relaxation of the glass network towards thermodynamic equilibrium of supercooled liquid.

  13. High-energy {gamma}-irradiation effect on physical ageing in Ge-Se glasses

    Energy Technology Data Exchange (ETDEWEB)

    Golovchak, R. [Lviv Scientific Research Institute of Materials of SRC ' Carat' , 202 Stryjska Str., Lviv, UA-79031 (Ukraine); Kozdras, A. [Department of Physics of Opole University of Technology, 75 Ozimska Str., Opole, PL-45370 (Poland); Department of Economy of Academy of Management and Administration in Opole, 18 Niedzialkowski Str., Opole, PL-45085 (Poland); Kozyukhin, S. [Institute of General and Inorganic Chemistry of RAS, Leninsky Pr. 31, Moscow 199991 (Russian Federation); Shpotyuk, O. [Lviv Scientific Research Institute of Materials of SRC ' Carat' , 202 Stryjska Str., Lviv, UA-79031 (Ukraine); Institute of Physics of Jan Dlugosz University, 13/15 al. Armii Krajowej, Czestochowa, PL-42201 (Poland)], E-mail: shpotyuk@novas.lviv.ua

    2009-09-01

    Effect of Co{sup 60} {gamma}-irradiation on physical ageing in binary Ge{sub x}Se{sub 100-x} glasses (5 {<=} x {<=} 27) is studied using conventional differential scanning calorimetry method. It is shown, that high-energy irradiation leads to additional increase in the glass transition temperature and endothermic peak area near the glass transition region over the one induced by isochronal storage of these glasses at normal conditions. This {gamma}-induced physical ageing is shown to be well-pronounced in Se-rich glasses (x < 20), while only negligible changes are recorded for glasses of 20 {<=} x {<=} 27 compositions. The effect under consideration is supposed to be associated with {gamma}-activated structural relaxation of the glass network towards thermodynamic equilibrium of supercooled liquid.

  14. RADIATION EFFECTS IN PHYSICAL AGING OF BINARY As-S AND As-Se GLASSES

    International Nuclear Information System (INIS)

    Golovchak, Roman; Shpotyuk, O.; Kozdras, A.; Riley, Brian J.; Sundaram, S.K.; McCloy, John S.

    2011-01-01

    Radiation-induced physical aging effects are studied in binary As x S 100-x and As x Se 100-x (30 (le) x (le) 42) glasses by conventional differential scanning calorimetry (DSC) method. It is shown that γ-irradiation (Co 60 source, ∼ 3 MGy dose) of glassy As x S 100-x caused a measurable increase in glass transition temperature and endothermic peak area in the vicinity of glass transition region, which was associated with acceleration of structural relaxation processes in these materials. In contrast to sulfide glasses, the samples of As-Se family did not exhibit any significant changes in DSC curves after γ-irradiation. The observed difference in radiation-induced physical aging between sulfides and selenides was explained by more effective destruction-polymerization transformations and possible metastable defects formation in S-based glassy network.

  15. Temperature-dependent structural relaxation in As{sub 40}Se{sub 60} glass

    Energy Technology Data Exchange (ETDEWEB)

    Golovchak, R., E-mail: roman_ya@yahoo.com [Lviv Sci. and Res. Institute of Materials of SRC ' Carat' , 202 Stryjska str., 79031 Lviv (Ukraine); Kozdras, A. [Opole University of Technology, 75, Ozimska str., Opole, PL-45370 (Poland); Academy of Management and Administration, 18 Niedzialkowski str., Opole, PL-45085 (Poland); Shpotyuk, O. [Jan Dlugosz University, 13/15, al. Armii Krajowej, 42201, Czestochowa (Poland); Gorecki, Cz. [Opole University of Technology, 75, Ozimska str., Opole, PL-45370 (Poland); Kovalskiy, A.; Jain, H. [Department of Materials Science and Engineering, Lehigh University, 5 East Packer Avenue, Bethlehem, PA 18015-3195 (United States)

    2011-08-01

    The origin of structural relaxation in As{sub 40}Se{sub 60} glass at different annealing temperatures is studied by differential scanning calorimetry (DSC) and in situ extended X-ray absorption fine structure (EXAFS) methods. Strong physical aging effect, expressed through the increase of endothermic peak area in the vicinity of T{sub g}, is recorded by DSC technique at the annealing temperatures T{sub a}>90{sup o}C. EXAFS data show that the observed structural relaxation is not associated with significant changes in the short-range order of this glass. An explanation is proposed for this relaxation behavior assuming temperature-dependent constraints. -- Highlights: → In this study we report experimental evidence for temperature-dependent constraints theory. → Structural relaxation of As{sub 2}Se{sub 3} glass at higher annealing temperatures is studied by DSC technique. → Accompanied changes in the structure are monitored by in situ EXAFS measurements.

  16. Geology, geochronology and geodynamic implications of the Cenozoic magmatic province in W and SE Ethiopia

    International Nuclear Information System (INIS)

    Berhe, S.M.; Desta, B.; Teferra, M.; Nicoletti, M.

    1987-01-01

    New K-Ar dates are presented for areas in W and SE Ethiopia. In the west, the dates distinguish the Geba Basalts of 40 to 32 Ma from the Welega Shield Volcanics which are shown to range from 11.2 + -2.2 to 7.8 + - 1.6 Ma. In SE Ethiopia, the Lower Stratoid flood basalts range from 30 + - 4.5 to 23.5 + - 4.5 Ma and are unconformably overlain by the Reira-Sanete shield volcanics which range from c. 15 to c. 2 Ma. The unconformity is marked by a palaeosol as are several of the intervals between the major volcanic stages of Ethiopia

  17. Geology, geochronology and geodynamic implications of the Cenozoic magmatic province in W and SE Ethiopia

    Energy Technology Data Exchange (ETDEWEB)

    Berhe, S.M.; Desta, B.; Teferra, M.; Nicoletti, M.

    1987-03-01

    New K-Ar dates are presented for areas in W and SE Ethiopia. In the west, the dates distinguish the Geba Basalts of 40 to 32 Ma from the Welega Shield Volcanics which are shown to range from 11.2 + -2.2 to 7.8 + - 1.6 Ma. In SE Ethiopia, the Lower Stratoid flood basalts range from 30 + - 4.5 to 23.5 + - 4.5 Ma and are unconformably overlain by the Reira-Sanete shield volcanics which range from c. 15 to c. 2 Ma. The unconformity is marked by a palaeosol as are several of the intervals between the major volcanic stages of Ethiopia.

  18. Enhanced field emission behavior of layered MoSe2

    International Nuclear Information System (INIS)

    Suryawanshi, Sachin R; Pawbake, Amit S; Jadkar, Sandesh R; More, Mahendra A; Pawar, Mahendra S; Late, Dattatray J

    2016-01-01

    Herein, we report one step facile chemical vapor deposition method for synthesis of single-layer MoSe 2 nanosheets with average lateral dimension ∼60 μm on 300 nm SiO 2 /Si and n-type silicon substrates and field emission investigation of MoSe 2 /Si at the base pressure of ∼1 × 10 −8 mbar. The morphological and structural analyses of the as-deposited single-layer MoSe 2 nanosheets were carried out using an optical microscopy, Raman spectroscopy and atomic force microscopy. Furthermore, the values of turn-on and threshold fields required to extract an emission current densities of 1 and 10 μA cm −2 , are found to be ∼1.9 and ∼2.3 V μm −1 , respectively. Interestingly, the MoSe 2 nanosheet emitter delivers maximum field emission current density of ∼1.5 mA cm −2 at a relatively lower applied electric field of ∼3.9 V μm −1 . The long term operational current stability recorded at the preset values of 35 μA over 3 hr duration and is found to be very good. The observed results demonstrates that the layered MoSe 2 nanosheet based field emitter can open up many opportunities for their potential application as an electron source in flat panel display, transmission electron microscope, and x-ray generation. Thus, the facile one step synthesis approach and robust nature of single-layer MoSe 2 nanosheets emitter can provide prospects for the future development of practical electron sources. (paper)

  19. An x-ray study of InSe

    International Nuclear Information System (INIS)

    Nagpal, K.C.; Ali, Z.

    1975-01-01

    Complete X-ray powder pattern of InSe, so far not available to literature, has been analyzed. The layer structure is based on a rhombohedral lattice cell, with space group R 3m, a sub(o) = 4.0046 +- 0.0005 A, csub(o) = 25.960 +- 0.004 A, and atomic position in 3 (a) of the space group : Zsub(In) = +-0.0555, Zsub(se) = 2/3 +- 0.106. Extreme softness and initial observe-reverse orientation of the rhombohedral cell in adjacent parts of a crystal or in thin lamellae parallel to the basal cleavage planes appear to be the main factors responsible for the characteristic sets of sharp and diffuse lines in the powder patterns normally obtained. These and Gandolfi camera powder patterns for several crystals are given. Heat treatment of powders obtained through cold work has indicated that comparatively short duration of 'annealing' at 600 deg C improves the powder pattern to some extent, but longer periods give products consisting of other phases of the In-Se system with small amount of InSe. The relative proportion of free space over the InSe powders in capsules as well as the amount of cold work seem to be the two main factors affecting the decomposition of InSe and appearance of other phases. Large platy crystals, on the other hand, withstand the heat treatment for a longer time. Even they undergo drastic changes in the sructure on prolonged heating at 600 deg C, yielding hexagonal phases with a common csub(o) = 19.26 A and a sub(o) = 4.0 and 7.11 respectively. (author)

  20. Photoluminescence properties of boron doped InSe single crystals

    International Nuclear Information System (INIS)

    Ertap, H.; Bacıoğlu, A.; Karabulut, M.

    2015-01-01

    Undoped and boron doped InSe single crystals were grown by Bridgman–Stockbarger technique. The PL properties of undoped, 0.1% and 0.5% boron doped InSe single crystals have been investigated at different temperatures. PL measurements revealed four emission bands labeled as A, B, C and D in all the single crystals studied. These emission bands were associated with the radiative recombination of direct free excitons (n=1), impurity-band transitions, donor–acceptor recombinations and structural defect related band (impurity atoms, defects, defect complexes, impurity-vacancy complex etc.), respectively. The direct free exciton (A) bands of undoped, 0.1% and 0.5% boron doped InSe single crystals were observed at 1.337 eV, 1.335 eV and 1.330 eV in the PL spectra measured at 12 K, respectively. Energy positions and PL intensities of the emission bands varied with boron addition. The FWHM of direct free exciton band increases while the FWHM of the D emission band decreases with boron doping. Band gap energies of undoped and boron doped InSe single crystals were calculated from the PL measurements. It was found that the band gap energies of InSe single crystals decreased with increasing boron content. - Highlights: • PL spectra of InSe crystals have been studied as a function of temperature. • Four emission bands were observed in the PL spectra at low temperatures. • PL intensity and position of free exciton band vary with doping and temperature. • Temperature dependences of the bands observed in the PL spectra were analyzed

  1. 300 Area fuel supply facilities deactivation mission analysis report

    International Nuclear Information System (INIS)

    Lund, D.P.

    1995-01-01

    This report presents the results of the 300 Area fuel supply facilities (formerly call ''N reactor fuel fabrication facilities'') Deactivation Project mission analysis. Hanford systems engineering (SE) procedures call for a mission analysis. The mission analysis is an important first step in the SE process

  2. Det stedløse fællesskab

    DEFF Research Database (Denmark)

    Andreasen, Torsten Arni Caleb

    2009-01-01

    Det værkløse, det uvedgåelige, det kommende fællesskab. I nr. 4 af tidsskriftet Aléa (1983) udkom første udgave af den franske filosof Jean-Luc Nancys artikel "La communauté désœuvrée" (Det værkløse fællesskab), der senere udkom med tilføjelser i bogen af samme navn (1986). Via en analyse af...

  3. HgSe(Te)-HgHal2 systems

    International Nuclear Information System (INIS)

    Pan'ko, V.V.; Khudolij, V.A.; Voroshilov, Yu.V.

    1989-01-01

    Using the methods of differential thermal and X-ray phase analyses the character of chemical interaction in the systems HgTe(Se)-HgHal 2 , where Hal is Cl, Br, I, is investigated. Formation of compounds Hg 3 Se 2 Hal 2 , Hg 3 Te 2 Hal 2 , Hg 3 TeCl 4 and Hg 3 TeBr 4 in these systems is established. The phase diagrams of the studied systems are presented. The parameters of elementary cells of the compounds with the unknown structure, as well as their unknown physicochemical properties, are determined

  4. Transcriptor de Lenguaje de Señas a Texto

    OpenAIRE

    Escalante Crespo, Perla Artemisa

    2006-01-01

    Este proyecto tiene como nombre "Transcriptor de Lenguaje de Señas a Texto" y tiene una orientación al procesamiento digital de imágenes. Nótese la aclaración de ser un transcriptor en lugar de traductor, el término es bien empleado, ya que traductor se aplica al significado de las palabras de un idioma a otro, y este proyecto es un transcriptor del lenguaje español signado a español, de ahí la diferencia. La acción de este proyecto viene implícita en su nombre, preci...

  5. Differential diagnosis of scintigraphic brain centres by 75Se selenite

    International Nuclear Information System (INIS)

    Bestagno, M.; Garraffa, V.; Rembado, R.; Guerra, U.

    1975-01-01

    Since standard brain scintigraphy with sup(99m)Tc is not always adequate for a satisfactory differential diagnosis of the radioactive foci detected, the possibilities of 75 Se sodium selenite were investigated. It was observed that in centres due to a vascular lesion the selenite concentration is always low, rising steeply in neoplasmic foci. The 75 Se-selenite scintigraphic method is considered highly valid, complementing that of sup(99m)Tc when this latter is unsuitable for diagnosis of the nature of cerebral foci [fr

  6. Far-Infrared Absorption of PbSe Nanorods

    KAUST Repository

    Hyun, Byung-Ryool

    2011-07-13

    Measurements of the far-infrared absorption spectra of PbSe nanocrystals and nanorods are presented. As the aspect ratio of the nanorods increases, the Fröhlich sphere resonance splits into two peaks. We analyze this splitting with a classical electrostatic model, which is based on the dielectric function of bulk PbSe but without any free-carrier contribution. Good agreement between the measured and calculated spectra indicates that resonances in the local field factors underlie the measured spectra. © 2011 American Chemical Society.

  7. Use of [75Se]selenomethionine in immunoglobulin biosynthetic studies

    International Nuclear Information System (INIS)

    Gutman, G.A.; Warner, N.L.; Harris, A.W.; Bowles, A.

    1978-01-01

    The gamma-emitting amino acid analog, [ 75 Se] selenomethionine, has been used as a biosynthetic label for immunoglobulins secreted by plasmacytomas in tissue culture. The secreted products are structurally intact with respect to their antibody combining sites and their class and allotype antigenic specificities. A component of [ 75 Se] selenomethionine preparations was found to bind to fetal calf serum proteins, in a manner releasable by mercaptoethanol, but not by sodium dodecyl sulfate and urea. Methods for circumventing the problems caused by this binding are described. (Auth.)

  8. Preparation of SnSe thin films by encapsulated selenization

    International Nuclear Information System (INIS)

    Sabar D. Hutagalung; Samsudi Sakrani; Yussof Wahab

    1994-01-01

    Tin selenide thin films were prepared by encapsulated selenization. A stacked layer of evaporated Sn and Se films were annealed in a carbon block at temperatures 100 - 500 degree Celsius for 3 hours. X-ray analysis and SEM (Scanning electron) micrograph results showed that SnSe was initially formed at 150 degree Celsius with crystal size 30.0 nm and reached optimum formation at 200 daximum of 57.4 % yield of 5-decene. Other factors such as reaction temperatures, types of solvent and wt% of rhenium loadings influence the activity of the catalytic system

  9. Microscopic theory of cation exchange in CdSe nanocrystals.

    Science.gov (United States)

    Ott, Florian D; Spiegel, Leo L; Norris, David J; Erwin, Steven C

    2014-10-10

    Although poorly understood, cation-exchange reactions are increasingly used to dope or transform colloidal semiconductor nanocrystals (quantum dots). We use density-functional theory and kinetic Monte Carlo simulations to develop a microscopic theory that explains structural, optical, and electronic changes observed experimentally in Ag-cation-exchanged CdSe nanocrystals. We find that Coulomb interactions, both between ionized impurities and with the polarized nanocrystal surface, play a key role in cation exchange. Our theory also resolves several experimental puzzles related to photoluminescence and electrical behavior in CdSe nanocrystals doped with Ag.

  10. Electric field gradient studies in SnSe

    Energy Technology Data Exchange (ETDEWEB)

    Pal, G. [IUC, DAE Facilities (India); Sebastian, K.C. [M.S. University, Physics Department (India); Chintalapudi, S.N. [IUC, DAE Facilities (India); Somayajulu, D.R.S. [M.S. University, Physics Department (India)

    1999-09-15

    The EFG in IV-VI compound semiconductor SnSe was studied using two hyperfine interaction techniques, namely, TDPAC and Moessbauer spectroscopy. The EFG in this material increases sharply up to 300 K and thereafter at higher temperatures it gets saturated. However, the conductivity increases steadily at all the temperatures. The conductivity curve has two slopes. The first portion is due to the population of shallow Cd acceptor levels. Thus, in SnSe also the variation of the EFG with temperature is complex, as in other medium-gap semiconductors.

  11. Electric field gradient studies in SnSe

    International Nuclear Information System (INIS)

    Pal, G.; Sebastian, K.C.; Chintalapudi, S.N.; Somayajulu, D.R.S.

    1999-01-01

    The EFG in IV-VI compound semiconductor SnSe was studied using two hyperfine interaction techniques, namely, TDPAC and Moessbauer spectroscopy. The EFG in this material increases sharply up to 300 K and thereafter at higher temperatures it gets saturated. However, the conductivity increases steadily at all the temperatures. The conductivity curve has two slopes. The first portion is due to the population of shallow Cd acceptor levels. Thus, in SnSe also the variation of the EFG with temperature is complex, as in other medium-gap semiconductors

  12. Positive magnetoresistance in Fe3Se4 nanowires

    Science.gov (United States)

    Li, D.; Jiang, J. J.; Liu, W.; Zhang, Z. D.

    2011-04-01

    We report the magnetotransport properties of Fe3Se4 nanowire arrays in anodic aluminum oxide (AAO) porous membrane. The temperature dependence of resistance of Fe3Se4 nanowires at a zero field shows thermal activated behavior below 295 K. The exponential relationship in resistance is consistent with the model of strong localization with variable-range hopping (VRH) for a finite one-dimensional wire. Resistance versus magnetic field curves below 100 K show small positive magnetoresistance (MR). The field dependencies of log[R(H)/R(0)] explain the positive MR as the effect of magnetic field on the VRH conduction.

  13. ¿Cómo se leen los números?

    OpenAIRE

    Pedro Macizo; Amparo Herrera

    2012-01-01

    En los modelos de procesamiento numérico se asume que para llegar a la información fonológica que nos permite nombrar un dígito arábigo como “3”, tenemos que acceder previamente a su significado (la cantidad 3). Esto no es necesario cuando leemos una palabra numérica como “tres”, pues podemos pronunciarla sin entender a qué cantidad se refiere. Pero nuestro equipo ha mostrado recientemente que tanto la denominación de dígitos arábigos como la lectura de palabras numéricas pueden realizarse si...

  14. g-factor of the ground state of 73Se

    International Nuclear Information System (INIS)

    Nishimura, Katsuhiko; Ohya, Susumu; Mutsuro, Naoshi

    1987-01-01

    Nuclear magnetic resonance on oriented 73 Se in an iron host has been observed at about 7mK. From resonance-shift measurement, the magnetic hyperfine-splitting frequency μ M , g-factor and magnetic hyperfine field were derived as μ M =102.61(3)MH z , |g(9/2 + )|=0.188(16) and B HF ( 73 SeFe)=716(81)kG. The experimental values of the g-factors of the g 9/2 neutron states, in the neighborhood of the neutron number 40, are compared with the theoretical values based on the core-polarization model. (author)

  15. The evaluation of Cu, Zn, Mn, and Se concentrations in the hair of South American camelids

    Directory of Open Access Journals (Sweden)

    Milada Holasová

    2017-01-01

    Full Text Available The aim of this study was to monitor the content of trace elements in the hair of South American camelids and to evaluate the effect of coat colour, species, age, and sex on their concentration in the hair. The samples were collected from 77 animals – 23 llamas (Llama guanicoe f. gllama and 54 alpacas (Llama guanicoe f. pacos during a spring health check. The concentrations of copper (Cu, zinc (Zn, and manganese (Mn were determined by Flame Atomic Absorption Spectrometry and selenium (Se by Hydride Generation Atomic Absorption Spectrometry. We found the following concentrations (mean ± standard deviation; mg/kg dry matter in the llama hair: Cu 9.70 ± 4.69; Zn 145.20 ± 21.07; Mn 12.49 ± 10.14; Se 0.25 ± 0.14. In alpaca hair we found the following concentrations: Cu 10.22 ± 2.90; Zn 129.81 ± 19.01; Mn 12.67 ± 13.85; Se 0.48 ± 0.24. We found a significant difference between llamas and alpacas in Zn and Se concentrations in the hair. From all the evaluated factors we found that coat colour had the highest effect on Mn and Se concentration. Dark haired animals had significantly higher concentrations of these trace elements than other coloured groups. The evaluation of the concentration of trace elements in the hair of llamas has a potential to be used for the evaluation of long-term status of trace elements in the body; however, it is necessary to continue with experimental work in this area. Our findings can serve as a pilot study for further works in this field.

  16. Efficiency limitations of polycrystalline thin film solar cells: case of Cu(In,Ga)Se2

    International Nuclear Information System (INIS)

    Werner, Juergen H.; Mattheis, Julian; Rau, Uwe

    2005-01-01

    Small-area Cu(In,Ga)Se 2 thin film solar cells have reached more than 19% efficiencies. Compared to other polycrystalline materials this efficiency value is remarkable. Nevertheless, the 19% for Cu(In,Ga)Se 2 range more than 6% (absolute) below the world's best single-crystalline Si cells and almost 14% below the upper theoretical limit of 33% for an ideal black body cell with infinitely large mobility and radiative recombination only. About 4% out of the 14% are of optical nature, additional 3% stem from the limited mobility/diffusion length and from band gap fluctuations with a standard deviation no. sigmano. g no. approxno. 50 meV due to spatial variations of composition and stoichiometry of the quaternary compound Cu(In,Ga)Se 2 . Thus, about 26% efficiency would be possible if there were only these band gap fluctuations. Additional, voltage-dependent electrostatic potential fluctuations push down the efficiency further to 19%: The polycrystalline Cu(In,Ga)Se 2 which is unavoidably structurally inhomogeneous due to dislocations, grain boundaries, point defects, etc. is also electrostatically inhomogeneous because of charged defects. Electrostatic potential fluctuations at the valence and conduction band edge may be not only responsible for a high saturation current density but also for the ideality factor in the current/voltage curve. The band gap and electrostatic potential fluctuations make the effective band gap which controls the intrinsic carrier density smaller than the average optical gap. The (zero bias) electrostatic potential fluctuations are here derived from the ideality factors of the current/voltage curve. The ideality factor reflects the voltage-induced electrostatic homogenization of the sample. For the world's best Cu(In,Ga)Se 2 cells with an ideality factor of n id =1.5, we estimate zero bias electrostatic potential fluctuations with a standard deviation no. sigmano. elec no. approxno. 140 meV

  17. Mapping biodiversity and setting conservation priorities for SE Queensland's rainforests using DNA barcoding.

    Science.gov (United States)

    Shapcott, Alison; Forster, Paul I; Guymer, Gordon P; McDonald, William J F; Faith, Daniel P; Erickson, David; Kress, W John

    2015-01-01

    Australian rainforests have been fragmented due to past climatic changes and more recently landscape change as a result of clearing for agriculture and urban spread. The subtropical rainforests of South Eastern Queensland are significantly more fragmented than the tropical World Heritage listed northern rainforests and are subject to much greater human population pressures. The Australian rainforest flora is relatively taxonomically rich at the family level, but less so at the species level. Current methods to assess biodiversity based on species numbers fail to adequately capture this richness at higher taxonomic levels. We developed a DNA barcode library for the SE Queensland rainforest flora to support a methodology for biodiversity assessment that incorporates both taxonomic diversity and phylogenetic relationships. We placed our SE Queensland phylogeny based on a three marker DNA barcode within a larger international rainforest barcode library and used this to calculate phylogenetic diversity (PD). We compared phylo- diversity measures, species composition and richness and ecosystem diversity of the SE Queensland rainforest estate to identify which bio subregions contain the greatest rainforest biodiversity, subregion relationships and their level of protection. We identified areas of highest conservation priority. Diversity was not correlated with rainforest area in SE Queensland subregions but PD was correlated with both the percent of the subregion occupied by rainforest and the diversity of regional ecosystems (RE) present. The patterns of species diversity and phylogenetic diversity suggest a strong influence of historical biogeography. Some subregions contain significantly more PD than expected by chance, consistent with the concept of refugia, while others were significantly phylogenetically clustered, consistent with recent range expansions.

  18. Mapping Biodiversity and Setting Conservation Priorities for SE Queensland’s Rainforests Using DNA Barcoding

    Science.gov (United States)

    Shapcott, Alison; Forster, Paul I.; Guymer, Gordon P.; McDonald, William J. F.; Faith, Daniel P.; Erickson, David; Kress, W. John

    2015-01-01

    Australian rainforests have been fragmented due to past climatic changes and more recently landscape change as a result of clearing for agriculture and urban spread. The subtropical rainforests of South Eastern Queensland are significantly more fragmented than the tropical World Heritage listed northern rainforests and are subject to much greater human population pressures. The Australian rainforest flora is relatively taxonomically rich at the family level, but less so at the species level. Current methods to assess biodiversity based on species numbers fail to adequately capture this richness at higher taxonomic levels. We developed a DNA barcode library for the SE Queensland rainforest flora to support a methodology for biodiversity assessment that incorporates both taxonomic diversity and phylogenetic relationships. We placed our SE Queensland phylogeny based on a three marker DNA barcode within a larger international rainforest barcode library and used this to calculate phylogenetic diversity (PD). We compared phylo- diversity measures, species composition and richness and ecosystem diversity of the SE Queensland rainforest estate to identify which bio subregions contain the greatest rainforest biodiversity, subregion relationships and their level of protection. We identified areas of highest conservation priority. Diversity was not correlated with rainforest area in SE Queensland subregions but PD was correlated with both the percent of the subregion occupied by rainforest and the diversity of regional ecosystems (RE) present. The patterns of species diversity and phylogenetic diversity suggest a strong influence of historical biogeography. Some subregions contain significantly more PD than expected by chance, consistent with the concept of refugia, while others were significantly phylogenetically clustered, consistent with recent range expansions. PMID:25803607

  19. Formation and properties of epitaxial CdSe, ZnSe quantum dots. Conventional molecular beam epitaxy and related techniques

    Energy Technology Data Exchange (ETDEWEB)

    Mahapatra, Suddhasatta

    2008-01-16

    This thesis systematically investigates three such alternative approaches, along with conventional MBE, with emphasis on the formation-mechanism of QDs, and optimization of their morphological and optical attributes. it is shown here that no distinct 3D islands are formed in MBE growth of CdSe on ZnSe. While CdSe heteroepitaxy occurs in the multilayer-mode at T{sub G}=300 C, a reentrant recovery of the layer-by-layer mode is reported in this thesis, for growth at T{sub G}<{proportional_to}240 C. In the second variant technique, formation of large and distinct islands is demonstrated by deposition of amorphous selenium (a-Se) onto a 2D CdSe epilayer at room temperature and its subsequent desorption at a higher temperature (T{sub D}=230 C). The process steps of the third variant technique, developed in course of this work, are very similar to those of the previous one-the only alteration being the substitution of selenium with tellurium as the cap-forming-material. (orig.)

  20. Exotic topological insulator states and topological phase transitions in Sb2Se3-Bi2Se3 heterostructures

    KAUST Repository

    Zhang, Qianfan

    2012-03-27

    Topological insulator is a new state of matter attracting tremendous interest due to its gapless linear dispersion and spin momentum locking topological states located near the surface. Heterostructures, which have traditionally been powerful in controlling the electronic properties of semiconductor devices, are interesting for topological insulators. Here, we studied the spatial distribution of the topological state in Sb 2Se 3-Bi 2Se 3 heterostructures by first-principle simulation and discovered that an exotic topological state exists. Surprisingly, the state migrates from the nontrivial Bi 2Se 3 into the trivial Sb 2Se 3 region and spreads across the entire Sb 2Se 3 slab, extending beyond the concept of "surface" state while preserving all of the topological surface state characteristics. This unusual topological state arises from the coupling between different materials and the modification of electronic structure near Fermi energy. Our study demonstrates that heterostructures can open up opportunities for controlling the real-space distribution of the topological state and inducing quantum phase transitions between topologically trivial and nontrivial states. © 2012 American Chemical Society.

  1. Molecular structure of virgin and Tg cycled (Ag2Se)x (AsSe)1-x bulk glasses

    Science.gov (United States)

    Wachtman, Jacob; Chen, Ping; Boochand, P.

    2009-03-01

    AsSe, the base glass (x = 0) in the titled ternary, is an interesting example of a chalcogenide that is partially de-mixed into As4Se4 molecules segregated from a connected AsSe network, with the latter determining glass network properties. Raman scattering reveals sharp modes of the Realgar molecules that are superimposed on broad modes coming from of the backbone. Upon Tg cycling virgin samples (as quenched melts), the concentration of de-mixed As4Se4 molecules decreases, suggesting that thermally induced polymerization occurs; molecules break up to form part of the connective tissue. Modulated DSC experiments reveal a broad exotherm near 140 ^oC in virgin samples, which becomes nearly extinct in Tg cycled samples. The exotherm may represent Realgar molecules nano-crystallizing as the temperature approaches Tg. Compositional trends in thermal parameters such as Tg(x), δCp(x), and the δHnr(x) as a function of Ag2Se content `x' of the glasses will be reported.

  2. Investigation of CuGaSe2/CuInSe2 double heterojunction interfaces grown by molecular beam epitaxy

    Directory of Open Access Journals (Sweden)

    Sathiabama Thiru

    2015-02-01

    Full Text Available In-situ reflection high-energy electron diffraction (RHEED observation and X-ray diffraction measurements were performed on heterojunction interfaces of CuGaSe2/CnInSe2/CuGaSe2 grown on GaAs (001 using migration-enhanced epitaxy. The streaky RHEED pattern and persistent RHEED intensity oscillations caused by the alternate deposition of migration-enhanced epitaxy sequence are observed and the growths of smooth surfaces are confirmed. RHEED observation results also confirmed constituent material interdiffusion at the heterointerface. Cross-sectional transmission electron microscopy showed a flat and abrupt heterointerface when the substrate temperature is as low as 400 °C. These have been confirmed even by X-ray diffraction and photoluminescence measurements.

  3. Formation and properties of epitaxial CdSe, ZnSe quantum dots. Conventional molecular beam epitaxy and related techniques

    International Nuclear Information System (INIS)

    Mahapatra, Suddhasatta

    2008-01-01

    This thesis systematically investigates three such alternative approaches, along with conventional MBE, with emphasis on the formation-mechanism of QDs, and optimization of their morphological and optical attributes. it is shown here that no distinct 3D islands are formed in MBE growth of CdSe on ZnSe. While CdSe heteroepitaxy occurs in the multilayer-mode at T G =300 C, a reentrant recovery of the layer-by-layer mode is reported in this thesis, for growth at T G D =230 C). The process steps of the third variant technique, developed in course of this work, are very similar to those of the previous one-the only alteration being the substitution of selenium with tellurium as the cap-forming-material. (orig.)

  4. Mobility activation in thermally deposited CdSe thin films

    Indian Academy of Sciences (India)

    Effect of illumination on mobility has been studied from the photocurrent decay characteristics of thermally evaporated CdSe thin films deposited on suitably cleaned glass substrate held at elevated substrate temperatures. The study indicates that the mobilities of the carriers of different trap levels are activated due to the ...

  5. An effective pair potential for liquid semiconductor, Se: Structure and ...

    Indian Academy of Sciences (India)

    The effective pair potential of liquid semiconductor Se is extracted from its experimental structure factor data using an accurate liquid state theory and this shows important basic features. A model potential incorporating the basic features of the structure factor extracted potential is suggested. This model potential is then used ...

  6. Far-Infrared Absorption of PbSe Nanorods

    KAUST Repository

    Hyun, Byung-Ryool; Bartnik, A. C.; Koh, Weon-kyu; Agladze, N. I.; Wrubel, J. P.; Sievers, A. J.; Murray, Christopher B.; Wise, Frank W.

    2011-01-01

    Measurements of the far-infrared absorption spectra of PbSe nanocrystals and nanorods are presented. As the aspect ratio of the nanorods increases, the Fröhlich sphere resonance splits into two peaks. We analyze this splitting with a classical

  7. Giant Rashba spin splitting in Bi2Se3: Tl

    KAUST Repository

    Singh, Nirpendra; Saeed, Yasir; Schwingenschlö gl, Udo

    2014-01-01

    First-principles calculations are employed to demonstrate a giant Rashba spin splitting in Bi2Se3:Tl. Biaxial tensile and compressive strain is used to tune the splitting by modifying the potential gradient. The band gap is found to increase under

  8. Electrical conduction mechanism in GeSeSb chalcogenide glasses

    Indian Academy of Sciences (India)

    by melt quenching has been determined at different temperatures in bulk through the I–V characteristic curves ... DC conductivity; chalcogenide glass; Sb–Se bonding; Poole–Frenkel mechanism .... measurements were taken at room temperature as well as ele- .... age across the sample was continuued, the induced thermal.

  9. Introduction : A decade of experience with the SE

    NARCIS (Netherlands)

    Cremers, Jan; Cremers, Jan; Stollt, Michael; Vitols, Sigurt

    2013-01-01

    The first (introductory) chapter of this book describes the (legal) background, the definition of the European Company (SE) and the different articles of the legislation. The focus is on workers involvement and the relationship with national practices. It also summarizes the different contributions.

  10. Pollen of Syzygium (Myrtaceae) from SE Asia, especially Thailand

    NARCIS (Netherlands)

    Parnell, J.

    2003-01-01

    Pollen of 57 species of Syzygium from SE Asia were surveyed by SEM. The grains are all ± triangular in polar view, uniformly small (mean diameter 10.4 μm) with few surface sculpturing features. All species examined exhibit a distinct apocolpium and, usually, apocolpial field. The presence of an

  11. Locoh, Thérèse - AJOL

    African Journals Online (AJOL)

    Locoh, Thérèse. Vol 10, No 3 (1999) - Articles Early Marriage and Motherhood in Sub-Saharan Africa Abstract. ISSN: 0850-8518. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use · Contact AJOL ...

  12. Sample (S): SE40_S24 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE40_S24 Solanum lycopersicum Kyotemari fruit Solanum lycopersicum NCBI taxonomy:40...81 Solanum lycopersicum Kyotemari fruit are grown in greenhouses of the Experimental Farm of Kyoto University (Takatsuki, Osaka, Japan) from winter 2013 to spring 2014. ...

  13. P. S. D DIE TEOLOGIESE HOOFGEDAGTES IN KIERKEGAARD SE ...

    African Journals Online (AJOL)

    Test

    D.Phil. DIE TEOLOGIESE HOOFGEDAGTES IN KIERKEGAARD SE. STRYD TEEN DIE HEGELSE SISTEEM. A. INLEIDENDE OPMERKING. Ons is van oordeel dat dit ongetwyfeld paslik is om in ons waardering van die persoon en werk van prof. H. P. Wolmarans, oor die Deense denker en digter, Kierkegaard, te skrywe.

  14. Vody i lesy Šumavy se zotavují

    Czech Academy of Sciences Publication Activity Database

    Kopáček, Jiří

    2018-01-01

    Roč. 97, č. 1 (2018), s. 52-54 ISSN 0042-4544 Institutional support: RVO:60077344 Keywords : bark beetle infestation * soil * water * atmospheric deposition Subject RIV: DJ - Water Pollution ; Quality https://vesmir.cz/cz/casopis/archiv-casopisu/2018/cislo-1/vody-lesy-sumavy-se-zotavuji.html

  15. Space charge limited conduction in CdSe thin films

    Indian Academy of Sciences (India)

    Unknown

    of trap limited space charge limited conduction (SCLC) at higher voltage. The transition voltage (Vt ) from ohmic to SCLC is found to be quite independent of ambient temperature as well as intensity of illumination. SCLC is explained on the basis of the exponential trap distribution in CdSe films. Trap depths estimated from.

  16. Strain tuning of optical properties in Bi2Se3

    DEFF Research Database (Denmark)

    Jensen, Mathias Rosdahl; Mørk, Jesper; Willatzen, Morten

    2017-01-01

    Based on symmetry principles we determine the most general Hamiltonian for the low energy physics of Bi2Se3, including contributions due to a static electric field and strain. The full three-dimensional model is projected into the surface states at k= 0, giving an effective two-dimensional Hamilt...

  17. Nonlinear optical characteristics of monolayer MoSe{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Le, Chinh Tam; Ullah, Farman; Senthilkumar, Velusamy; Kim, Yong Soo [Department of Physics and Energy Harvest Storage Research Center, University of Ulsan (Korea, Republic of); Clark, Daniel J.; Jang, Joon I. [Department of Physics, Applied Physics and Astronomy, Binghamton University, Binghamton, NY (United States); Sim, Yumin; Seong, Maeng-Je [Department of Physics, Chung-Ang University, Seoul (Korea, Republic of); Chung, Koo-Hyun [School of Mechanical Engineering, University of Ulsan (Korea, Republic of); Park, Hyoyeol [Electronics, Communication and Semiconductor Applications Department, Ulsan College (Korea, Republic of)

    2016-08-15

    In this study, we utilized picosecond pulses from an Nd:YAG laser to investigate the nonlinear optical characteristics of monolayer MoSe{sub 2}. Two-step growth involving the selenization of pulsed-laser-deposited MoO{sub 3} film was employed to yield the MoSe{sub 2} monolayer on a SiO{sub 2}/Si substrate. Raman scattering, photoluminescence (PL) spectroscopy, and atomic force microscopy verified the high optical quality of the monolayer. The second-order susceptibility χ{sup (2)} was calculated to be ∝50 pm V{sup -1} at the second harmonic wavelength λ{sub SHG} ∝810 nm, which is near the optical gap of the monolayer. Interestingly, our wavelength-dependent second harmonic scan can identify the bound excitonic states including negatively charged excitons much more efficiently, compared with the PL method at room temperature. Additionally, the MoSe{sub 2} monolayer exhibits a strong laser-induced damage threshold ∝16 GW cm{sup -2} under picosecond-pulse excitation{sub .} Our findings suggest that monolayer MoSe{sub 2} can be considered as a promising candidate for high-power, thin-film-based nonlinear optical devices and applications. (copyright 2016 by WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  18. The Crystal Structure of Cu4Bi4Se9

    DEFF Research Database (Denmark)

    Makovicky, E.; Søtofte, Inger; Karup-Møller, S.

    2002-01-01

    contains three square pyramidal Bi sites, an octahedrally coordinated Bi site as well as two tetrahedrally and two irregularly coordinated Cu sites. The structure is an intergrowth of PbS-like slabs with irregularly configured slabs of Bi pyramids and Cu tetrahedra. It contains covalently bonded Se-2...

  19. Sample (S): SE3_S02 [Metabolonote[Archive

    Lifescience Database Archive (English)

    Full Text Available SE3_S02 Solanum lycopersicum House Momotaro fruit Solanum lycopersicum NCBI taxonom...y:4081 Solanum lycopersicum House Momotaro (ref: http://www.e-taneya.com/item/914.html) are grown at agricultural field under normal film in natural conditions. ...

  20. Det jordløse landbrug i industrikvarteret

    DEFF Research Database (Denmark)

    Rentz-Petersen, Nee

    2014-01-01

    Forskningsprojektet 'Det Jordløse Landbrug i Industrikvarteret' undersøger muligheder og konsekvenser ved at placere større landbrugsanlæg nær bynære industrikvarterer i Danmark. Projektet opstiller fire konkrete scenarier for fremtidens agro-industrikvarter, hvor fødevareproduktion kobles med bl...

  1. Empreendedorismo religioso: quando Weber se associa a Granovetter

    Directory of Open Access Journals (Sweden)

    Victor Silva Corrêa

    2016-12-01

    Full Text Available O fenômeno religioso no Brasil vem atraindo crescente atenção da academia, impulsionado, em grande parte, pela expansão das seitas protestantes no país, sobretudo de vertente pentecostal. Na esteira dessa transformação, um tema, em particular, reveste-se de especial importância. Trata-se do papel dos chamados empreendedores religiosos aqui compreendidos como os novos pastores evangélicos. No entanto, tais atores não vêm sendo muito estudados. O presente trabalho busca preencher essa lacuna. Recorre-se, para isso, às contribuições teóricas clássicas derivadas de Weber, em associação às contribuições contemporâneas originárias de Granovetter, em particular, sobre acoplamento e desacoplamento. Conclui-se o trabalho propondo um novo referencial para a análise de certas dimensões do empreendedorismo religioso.

  2. Electricity producer SE decided to solve crisis through offensive

    International Nuclear Information System (INIS)

    Janoska, J.

    2003-01-01

    Instalment payments in this and the coming two years amount to 32 billion Sk (762.8 mn Euro) - that is about 60 percent of the overall credit burden of the electricity producer Slovenske elektrarne (SE). And so the situation from three years ago is repeating itself - a new financial department of the company is expected to lead the company out of the substantial cash-flow crisis caused by credit burden. This difficulties have been caused by decisions taken by state like building of power plant in Mochovce. Minister Nemcsics will not be in the position to complete his ambition to direct the activities of SE, his successor will need time to find his way and so the solution stays in hands of the company management. Where will they look for the necessary recourses? The operation generates virtually no cash-flow increase - reminds General Manager for Economy and Finances, Milos Sujansky. What the manager considers a possible solution is loan restructuring. 'We have to review the whole loan portfolio in order to eliminate the pressure caused by the necessity to repay the debts in 2004 and the beginning of 2005 and that would allow as to survive in a relatively normal state,' unveils the company plans M. Sujansky. That would mean postponing the instalment payments until 2007. Before this strategy was prepared the existing debts had to be analysed. The results of this analysis showed 'an inconsistent debt portfolio with many non-standard elements anchored in relevant contracts'. In the opinion of Director for External Financing this fact makes the loan management and decision making in regards to assets/liabilities structure difficult. 'When you have 35 different loans and every contract is different - communication and monitoring costs much effort,' he adds. According to an Auditors Report for 2002 prepared according to ISA standards even the share of third-party capital is high and inhomogeneous. The previous financial management managed to minimize the deficit. The fact

  3. Chemistry in CESM-SE: Evaluation, Performance and Optimization

    Energy Technology Data Exchange (ETDEWEB)

    Lamarque, Jean-Francois [National Center for Atmospheric Research, Boulder, CO (United States); Conley, Andrew [National Center for Atmospheric Research, Boulder, CO (United States); Vitt, Francis [National Center for Atmospheric Research, Boulder, CO (United States); Drake, John [Univ. of Tennessee, Knoxville, TN (United States); Sun, Jian [Univ. of Tennessee, Knoxville, TN (United States)

    2016-01-06

    The purpose of the proposed work focused on development of chemistry representation within the Spectral Element (SE) dynamical core as implemented in the Community Earth System Model (CESM). More specifically, a main focus was on the ability of SE to accurately represent tracer transport. The proposed approach was to incrementally increase the complexity of the problem, starting from specified two-dimensional flow and tracers to simulations using specified dynamics and full chemistry. As demonstrated below, we have successfully studied all aspects of the proposed work, although only part of the work has been published in the refereed literature so far. Furthermore, because the SE dynamical core has been found to have several deficiencies that are still being investigated for solution, not all proposed tasks were finalized. In addition to the tests for SE performance, in an effort to decrease the computational burden of interactive chemistry, especially in the case of a large number of chemical species and chemical reactions, development on a faster chemical solver and implementation on GPUs has been implemented in CESM under the leadership of John Drake (U. Tennessee).

  4. Exciton dephasing in ZnSe quantum wires

    DEFF Research Database (Denmark)

    Wagner, Hans Peter; Langbein, Wolfgang Werner; Hvam, Jørn Märcher

    1998-01-01

    The homogeneous linewidths of excitons in wet-etched ZnSe quantum wires of lateral sizes down to 23 nm are studied by transient four-wave mixing. The low-density dephasing time is found to increase with decreasing wire width. This is attributed mainly to a reduction of electron-exciton scattering...

  5. On the symmetry of phosphorous doped ZnSe

    Indian Academy of Sciences (India)

    The site symmetry of P doped ZnSe is analysed in detail here, as the recent experiments suggest two possible symmetries T d and C 3 V . The reduction to C 3 V is attributed to the presence of natural impurity, Ga. Our calculations based on molecular model and Green's functions suggest that the symmetry C 3 V is possible ...

  6. On the symmetry of phosphorous doped ZnSe

    Indian Academy of Sciences (India)

    Unknown

    Abstract. The site symmetry of P doped ZnSe is analysed in detail here, as the recent experiments suggest two possible symmetries Td and C3V. The reduction to C3V is attributed to the presence of natural impurity,. Ga. Our calculations based on molecular model and Green's functions suggest that the symmetry C3V is.

  7. Low temperature scintillation in ZnSe crystals

    Czech Academy of Sciences Publication Activity Database

    Dafinei, I.; Fasoli, M.; Ferroni, F.; Mihóková, Eva; Orio, F.; Pirro, S.; Vedda, A.

    2010-01-01

    Roč. 57, č. 3 (2010), 1470-1474 ISSN 0018-9499 Institutional research plan: CEZ:AV0Z10100521 Keywords : bolometers * double beta decay * scintillation detectors * ZnSe Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.519, year: 2010

  8. Specific heat of ZnCoSe semimagnetic semiconductor

    NARCIS (Netherlands)

    Twardowski, A.; Swagten, H.J.M.; Jonge, de W.J.M.; Demianiuk, M.

    1990-01-01

    The magnetic specific heat of ZnCoSe data are reported in the temperature range 1.5

  9. Tests of pancreatic function using /sup 75/Se--Selenomethionine

    Energy Technology Data Exchange (ETDEWEB)

    Krasner, N; Brodie, M J; Sumner, D J; Thomson, T J

    1976-04-01

    Pancreatic function was investigated in 43 patients using a combination of conventional and subtraction scans of the pancreas and duodenal aspiration of the /sup 75/Se-Selenomethionine injected, in the time periods 60 to 150 minutes, 90 to 120 minutes and 105 to 150 minutes after injection. Patients with chronic alcoholism, chronic pancreatitis, pancreatic carcinoma, extrahepatic biliary obstruction and liver disease were included. Seven patients with no evidence of gastro-intestinal disease served as controls. Pancreatic scanning provided eight false positive and two false negative results (23.3 percent) and with /sup 75/Se-Selenomethionine excretion at 105 to 150 minutes, six false results were obtained (14 percent). In only one patient was a false positive result obtained with both scans and the /sup 75/Se-Selenomethionine test. The performance of conventional and subtraction scans of the pancreas with measurement of /sup 75/Se-Selenomethionine activity in the duodenal aspirate collected from 105 to 150 minutes after injection provides a convenient means of testing pancreatic exocrine function in a single three hour session.

  10. FHFA Underserved Areas

    Data.gov (United States)

    Department of Housing and Urban Development — Federal Housing Finance Agency's (FHFA) Underserved Areas establishes underserved area designations for census tracts in Metropolitan Areas (MSAs), nonmetropolitan...

  11. Quantum chemistry of the minimal CdSe clusters

    Science.gov (United States)

    Yang, Ping; Tretiak, Sergei; Masunov, Artëm E.; Ivanov, Sergei

    2008-08-01

    Colloidal quantum dots are semiconductor nanocrystals (NCs) which have stimulated a great deal of research and have attracted technical interest in recent years due to their chemical stability and the tunability of photophysical properties. While internal structure of large quantum dots is similar to bulk, their surface structure and passivating role of capping ligands (surfactants) are not fully understood to date. We apply ab initio wavefunction methods, density functional theory, and semiempirical approaches to study the passivation effects of substituted phosphine and amine ligands on the minimal cluster Cd2Se2, which is also used to benchmark different computational methods versus high level ab initio techniques. Full geometry optimization of Cd2Se2 at different theory levels and ligand coverage is used to understand the affinities of various ligands and the impact of ligands on cluster structure. Most possible bonding patterns between ligands and surface Cd/Se atoms are considered, including a ligand coordinated to Se atoms. The degree of passivation of Cd and Se atoms (one or two ligands attached to one atom) is also studied. The results suggest that B3LYP/LANL2DZ level of theory is appropriate for the system modeling, whereas frequently used semiempirical methods (such as AM1 and PM3) produce unphysical results. The use of hydrogen atom for modeling of the cluster passivating ligands is found to yield unphysical results as well. Hence, the surface termination of II-VI semiconductor NCs with hydrogen atoms often used in computational models should probably be avoided. Basis set superposition error, zero-point energy, and thermal corrections, as well as solvent effects simulated with polarized continuum model are found to produce minor variations on the ligand binding energies. The effects of Cd-Se complex structure on both the electronic band gap (highest occupied molecular orbital-lowest unoccupied molecular orbital energy difference) and ligand binding

  12. Electronic structure and exchange interactions in diluted semimagnetic semiconductors (Zn,Co)Se and (Zn,Mn)Se

    Science.gov (United States)

    Mašek, J.

    1991-05-01

    A comparative study of the electronic structure of (Zn,Co)Se and (Zn,Mn)Se is done by using a tight-binding version of the coherent potential approximation. The densities of states, relevant for a photoemission experiment, are calculated for a magnetically disordered phase. The exchange constant Jpd is obtained from the splitting of the valence band top in the ferromagnetic phase of the mixed crystal; Jdd is estimated from the energy of a spin reversal. We explain the large exchange constant in the Co-based systems as a result of efficient hybridization of the d-states with the valence band.

  13. Complexing in the system Rb2SeO4-UO2SeO4-H2O

    International Nuclear Information System (INIS)

    Kuchumova, N.V.; Shtokova, I.P.; Serezhkina, L.B.; Serezhkin, V.N.

    1989-01-01

    Method of isothermal solubility at 25 deg C is used to study interaction of rubidium and uranyl selenates in aqueous solution. Formation of congruently soluble Rb 2 UO 2 (SeO 4 ) 2 x2H 2 O and Rb 2 (UO 2 ) 2 x(SeO 4 ) 3 x6H 2 O is stated. For the last compound crystallographic characteristics (a=10.668; b=14.935(9); c=13.891(7) A; β=104.94(1); Z=4, sp.gr. P2 1 /c) are determined. Thermal decomposition of a compound results in formation of Rb 2 U 2 O 7

  14. Chemical bath deposited Zn(Se,OH){sub x} on Cu(In,Ga)(S,Se){sub 2} for high efficiency thin film solar cells: growth kinetics, electronic properties, device performance and loss analysis

    Energy Technology Data Exchange (ETDEWEB)

    Ennaoui, A.; Weber, M. [Hahn-Meitner-Institut Berlin GmbH (Germany). Bereich Physikalische Chemie; Saad, M.; Harneit, W.; Lux-Steiner, M.C. [Hahn-Meitner-Institut Berlin GmbH (Germany). Bereich Festkoerperphysik; Karg, F. [Siemens Solar GmbH, Muenchen (Germany)

    2000-02-21

    Zn(Se,OH){sub x} thin films were grown on Cu(In,Ga)(S,Se){sub 2} (CIGSS) substrate by chemical bath technique. The initial formation and subsequent development of the CIGSS/Zn(Se,OH){sub x} interface are studied by XPS photoemission spectroscopy. Changes in the In 4d and Zn 3d core lines are used to directly determine the CIGSS/Zn(Se,OH){sub x} heterojunction valence band discontinuity and the consequent heterojunction band diagram. For device optimization the thickness and good surface coverage were controlled by XPS-UPS photoemission spectroscopy. A Zn(Se,OH){sub x} thickness below 10 nm has been found to be optimum for achieving a homogeneous and compact film on CIGSS. A remarkably high active area efficiency up to 15.7% (total area efficiency 13.26% with open circuit voltage (V{sub oc}) up to 565.74 mV, a fill factor (FF) of 71% and a short-circuit photocurrent density (J{sub ph}) greater than 33.01 mA/cm{sup 2}) are obtained. The internal parameters, such as the saturation currents, the series resistance R{sub s} and shunt resistance R{sub sh} are calculated. Major losses in these cells are due to the significant influence of the series resistance R{sub s} on the fill factor. (orig.)

  15. Neutron Activation Resonance Integrals of 74Se, 78Se, 80Se, 81Br, 127I, 130Te, 138Ba, 140Ce, and 142Ce

    International Nuclear Information System (INIS)

    Ricabarra, M. D.; Turjanskl, R.; Ricabarra, G. H.; Bigham, C.B.

    1968-01-01

    A lithium-drift germanium γ-ray spectrometer has been used to make accurate intercomparisons of the ratio of resonance-integral to thermal-activation cross section by measuring cadmium ratios or relative activation rates in two different neutron spectra. The standard, gold, or secondary standard, indium, was mixed uniformly in the samples and the activities resolved with the spectrometer. Expressed as Westcott S 0 values, the results relative to S 0 = 17.7 for gold were as follows: 74 Se = 10.3 +± 0.1, 78 Se = 12.3 ± 0.3, 80 Sc = 2.65 ± 0.02, 81 Br = 24.3 ± 0.5, 127 I = 27.8 ± 0.5, 130 Te = 2.10 ± 0.07, 138 Ba = 0.649 ± 0.004, 140 Ce = 0.476 ± 0.003, 142 Ce = 0.865 ± 0.005. (author)

  16. Effect of lattice disorder on the thermal conductivity of ZnBeSe, ZnMgSe and ZnBeMgSe crystals

    International Nuclear Information System (INIS)

    Strzałkowski, K.

    2015-01-01

    Zn 1−x−y Be x Mg y Se mixed crystals investigated in this work were grown from the melt by the high pressure high temperature modified Bridgman method in the range of composition 0 < x,y < 0.33. Photopyroelectric (PPE) calorimetry in the back (BPPE) and front (FPPE) configuration was applied for thermal investigation of solid samples. The thermal diffusivity and effusivity of investigated crystals were derived from the experimental data. Since dynamic thermal parameters are connected with each other, thermal conductivity of the specimens was calculated from theoretical dependencies between them. The influence of the beryllium (x) and magnesium (y) content on thermal properties of these crystals have been presented and discussed. Order-disorder effects observed for these materials previously have been also taken into account. Finally, thermal diagrams, i.e. thermal conductivity versus composition were presented and discussed applying model given by Sadao Adachi. - Highlights: • Investigated II–VI crystals were obtained by a high pressure modified Bridgman method. • A complete thermal characterization of Zn 1−x−y Be x Mg y Se semiconductors was carried out. • The effect of lattice disorder on thermal properties was presented and discussed. • Obtained data were analyzed applying lattice thermal conductivity model. • Contribution to thermal resistivity arising from lattice disorder was calculated

  17. Que es lo que queda cuando el agua se va

    Directory of Open Access Journals (Sweden)

    Hernán Ascui Fernández

    2007-10-01

    Full Text Available El agua siempre deja huellas de su paso. Las aguas del Nilo, después de inundar las llanuras del río, se retiraban dejando el suelo colmado de los nutrientes que habían traído desde el corazón de África. Las costas de Chile han sido modeladas por el ir y venir de las aguas marinas, el río Ibáñez ha esculpido un profundo canal en la roca para abrirse paso, dando nacimiento a un magnífico lugar conocido como Garganta del río Ibáñez. Las cascadas horadan montañas para poder deslizarse como blancas lágrimas, la sobrecogedora belleza de los glaciares ha dejado potentes huellas de sus trayectorias. La lluvia también deposita marcas en los lugares y superficies que moja. A veces son apenas sutiles señales como el musgo que crece en las piedras húmedas o en el perfume de los bosques de Valdivia, con su tierra negra y empapada de lluvia y rocío. Otras veces las huellas del agua están presentes en la arquitectura como ocurre con los palafitos de Castro o Caleta Tortel, donde las casas se levantan para tomar distancia del agua que se mueve al ritmo de las mareas. En otras ocasiones, las huellas del descorren el velo de un drama urbano; es lo que ocurrió con la inundación del invierno pasado. Las huellas del agua aún son visibles en las paredes manchadas, en los muebles, en los pisos. El agua se fue pero dejando tras de sí un desalentador recuerdo de su paso por las ciudades, los pueblos y las casas.

  18. Sensor Exposure, Exploitation, and Experimentation Environment (SE4)

    Science.gov (United States)

    Buell, D.; Duff, F.; Goding, J.; Bankston, M.; McLaughlin, T.; Six, S.; Taylor, S.; Wootton, S.

    2011-09-01

    As the resident space object population increases from new launches and events such as the COSMOS/IRIDIUM collision, the maintenance of high-level Space Situational Awareness (SSA) has become increasingly difficult. To maintain situational awareness of the changing environment, new systems and methods must be developed. The Sensor Exposure, Exploitation and Experimentation Environment (SE4) provides a platform to illustrate “The Art of the Possible” that shows the potential benefit of enriched sensor data collections and real-time data sharing. Through modeling and simulation, and a net-centric architecture, SE4 shows the added value of sharing data in real-time and exposing new types of sensor data. The objective of SE4 is to develop an experimentation and innovation environment for sensor data exposure, composable sensor capabilities, reuse, and exploitation that accelerates the delivery of needed Command and Control, Intelligence, Surveillance, and Reconnaissance capabilities to the warfighter. Through modeling, simulation and rapid prototyping, the art of the possible for a fully-connected, net-centric space Command and Control (C2) and sensor enterprise can be demonstrated. This paper provides results that demonstrate the potential for faster cataloging of breakup events and additional event monitoring that are possible with data available today in the Space Surveillance Network (SSN). Demonstrating the art of the possible for the enterprise will guide net-centric requirements definition and facilitate discussions with stakeholder organizations on the Concept of Operations (CONOPS), policy, and Tactics, Techniques, and Procedures (TTP) evolution necessary to take full advantage of net-centric operations. SE4 aligns with direction from Secretary Gates and the Chairman Joint Chief of Staff that emphasizes the need to get the most out of our existing systems. Continuing to utilize SE4 will enable the enterprise by demonstrating the benefits of applying

  19. Photoinduced interaction of CdSe quantum dot with coumarins

    Energy Technology Data Exchange (ETDEWEB)

    El-Kemary, Maged, E-mail: elkemary@sci.kfs.edu.eg [Nanotechnology Center, Faculty of Science, Kafrelsheikh University, 33516 Kafrelsheikh (Egypt); Gaber, Mohamed; El-Sayed, Y.S. [Chemistry Department, Faculty of Science, University of Tanta, Tanta (Egypt); Gheat, Youssef [Nanotechnology Center, Faculty of Science, Kafrelsheikh University, 33516 Kafrelsheikh (Egypt); Chemistry Department, Faculty of Science, University of Tanta, Tanta (Egypt)

    2015-03-15

    Cadmium selenide (CdSe) quantum dots (QDs) were synthesized with a cubic shape having a diameter of ∼5.24 nm. The prepared CdSe QDs were characterized by using UV–visible, Fourier transform infrared (FTIR), powder X-ray diffraction (XRD) and transmission electron microscope (TEM) measurements. The UV–visible absorption spectra indicate that the optical band gap of CdSe QDs is ∼622 nm and the peak shift can mainly be due to the quantum size effects. The fluorescence decay kinetics for the synthesized QDs was followed by time-resolved fluorescence spectroscopy, and the spectra were analyzed in regard to a bi-exponential model to identify two lifetime values, that is, shorter-lifetime 1.37 ns (55%) and longer-lifetime 6.58 ns (45%). The interaction of coumarin 152 (C152) and coumarin 153 (C153) with QDs surface brings about further considerable changes in the absorption and fluorescence patterns. The calculated binding constant from fluorescence quenching method matches well with that determined from the absorption spectral changes. The static quenching mechanism was confirmed by large magnitude of K{sub SV} and unaltered fluorescence lifetime. - Highlights: • CdSe QDs were synthesized with a cubic shape having a diameter of ∼5.24 nm. • The UV–visible absorption spectra indicate that the optical band gap of CdSe QDs is ∼622 nm. • Picosecond fluorescence measurements of the QDs suggest bi-exponential function. • The calculated binding constant from fluorescence quenching method matches well with that determined from the absorption spectral changes. • The static quenching mechanism was confirmed by large magnitude of K{sub SV} and unaltered fluorescence lifetime.

  20. Synthesis, crystal structure, optical, and electronic study of the new ternary thorium selenide Ba{sub 3}ThSe{sub 3}(Se{sub 2}){sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Prakash, Jai [Department of Chemistry, Northwestern University, Evanston, IL 60208-3113 (United States); Mesbah, Adel [Department of Chemistry, Northwestern University, Evanston, IL 60208-3113 (United States); ICSM, UMR 5257 CEA/CNRS/UM2/ENSCM, Site de Marcoule-Bât. 426, BP 17171, 30207 Bagnols-sur-Cèze cedex (France); Beard, Jessica [Department of Chemistry, Northwestern University, Evanston, IL 60208-3113 (United States); Lebègue, Sébastien [Laboratoire de Cristallographie, Résonance Magnétique et Modélisations (CRM2, UMR CNRS 7036), Institut Jean Barriol, Université de Lorraine, BP 239, Boulevard des Aiguillettes, 54506 Vandoeuvre-lès-Nancy (France); Malliakas, Christos D. [Department of Chemistry, Northwestern University, Evanston, IL 60208-3113 (United States); Ibers, James A., E-mail: ibers@chem.northwestern.edu [Department of Chemistry, Northwestern University, Evanston, IL 60208-3113 (United States)

    2015-11-15

    The compound Ba{sub 3}ThSe{sub 3}(Se{sub 2}){sub 2} has been synthesized by solid-state methods at 1173 K. Its crystal structure features one-dimensional chains of {sup 1}{sub ∞}[Th(Se){sub 3}(Se{sub 2}){sub 2}{sup 6−}] separated by Ba{sup 2+} cations. Each Th atom in these chains is coordinated to two Se–Se single-bonded pairs and four Se atoms to give rise to a pseudooctahedral geometry around Th. The Th–Se distances are consistent with Th{sup 4+} and hence charge balance of Ba{sub 3}ThSe{sub 3}(Se{sub 2}){sub 2} is achieved as 3×Ba{sup 2+}, 1×Th{sup 4+}, 3×Se{sup 2−}, and 2×Se{sub 2}{sup 2−}. From optical measurements the band gap of Ba{sub 3}ThSe{sub 3}(Se{sub 2}){sub 2} is 1.96(2) eV. DFT calculations indicate that the compound is a semiconductor. - Graphical abstract: Local coordination environment of Th atoms in the Ba{sub 3}ThSe{sub 3}(Se{sub 2}){sub 2} structure. - Highlights: • Ba{sub 3}ThSe{sub 3}(Se{sub 2}){sub 2} has been synthesized by solid-state methods at 1173 K. • The structure features chains of {sup 1}{sub ∞}[Th(Se){sub 3}(Se{sub 2}){sub 2}{sup 6−}] separated by Ba{sup 2+} cations. • Ba{sub 3}ThSe{sub 3}(Se{sub 2}){sub 2} is a semiconductor with a band gap of 1.96(2) eV.