Research achievements in Bangladesh agriculture using nuclear techniques

International Nuclear Information System (INIS)

Sattar, M.A.

1997-01-01

Application of isotope and radiation techniques in Bangladesh agriculture has been initiated in 1961 with the establishment of Atomic Energy Agricultural Research Centre, Dhaka under the then Pakistan Atomic Energy Commission. The activity of the centre was strengthened and upgraded to the level of an institute as a constituent organization of Bangladesh Atomic Energy Commission in 1972. It was further reorganized, made an autonomous research organization under the Ministry of Agriculture in 1982 and renamed as Bangladesh Institute of Nuclear Agriculture. The other organizations involved in nuclear agricultural research are Institute of Food and Radiation Biology and Bangladesh Agricultural University. A number of technologies have been developed using nuclear techniques that imparted on agricultural development. Sixteen new crops were developed using physical (200-700 Gy gamma rays) and chemical mutagen (NaN 3 ). Soil fertility and plant nutrition technologies were developed using both stable and radio isotopes. The improved feeding strategies and utilization of locally available low quality feed material (rice straw) were determined using 51 Cr-EDTA and 125 I in order to have better livestock growth and reproduction ability. Several constraints related to nuclear research were identified. Increased government commitment and international cooperation are of the utmost importance for effective utilization of the benefits of nuclear technology and to face the increasing demand for food for the ever increasing population in years to come

Q-Technique and Graphics Research.

Science.gov (United States)

Kahle, Roger R.

Because Q-technique is as appropriate for use with visual and design items as for use with words, it is not stymied by the topics one is likely to encounter in graphics research. In particular Q-technique is suitable for studying the so-called "congeniality" of typography, for various copytesting usages, and for multivariate graphics research. The…

[Research progress and development trend of quantitative assessment techniques for urban thermal environment.

Science.gov (United States)

Sun, Tie Gang; Xiao, Rong Bo; Cai, Yun Nan; Wang, Yao Wu; Wu, Chang Guang

2016-08-01

Quantitative assessment of urban thermal environment has become a focus for urban climate and environmental science since the concept of urban heat island has been proposed. With the continual development of space information and computer simulation technology, substantial progresses have been made on quantitative assessment techniques and methods of urban thermal environment. The quantitative assessment techniques have been developed to dynamics simulation and forecast of thermal environment at various scales based on statistical analysis of thermal environment on urban-scale using the historical data of weather stations. This study reviewed the development progress of ground meteorological observation, thermal infrared remote sensing and numerical simulation. Moreover, the potential advantages and disadvantages, applicability and the development trends of these techniques were also summarized, aiming to add fundamental knowledge of understanding the urban thermal environment assessment and optimization.

Research achievements in Bangladesh agriculture using nuclear techniques

Energy Technology Data Exchange (ETDEWEB)

Sattar, M.A. [Bangladesh Institute of Nuclear Agriculture, Mymensingh, (Bangladesh)

1997-10-01

Application of isotope and radiation techniques in Bangladesh agriculture has been initiated in 1961 with the establishment of Atomic Energy Agricultural Research Centre, Dhaka under the then Pakistan Atomic Energy Commission. The activity of the centre was strengthened and upgraded to the level of an institute as a constituent organization of Bangladesh Atomic Energy Commission in 1972. It was further reorganized, made an autonomous research organization under the Ministry of Agriculture in 1982 and renamed as Bangladesh Institute of Nuclear Agriculture. The other organizations involved in nuclear agricultural research are Institute of Food and Radiation Biology and Bangladesh Agricultural University. A number of technologies have been developed using nuclear techniques that imparted on agricultural development. Sixteen new crops were developed using physical (200-700 Gy gamma rays) and chemical mutagen (NaN{sub 3}). Soil fertility and plant nutrition technologies were developed using both stable and radio isotopes. The improved feeding strategies and utilization of locally available low quality feed material (rice straw) were determined using {sup 51}Cr-EDTA and {sup 125}I in order to have better livestock growth and reproduction ability. Several constraints related to nuclear research were identified. Increased government commitment and international cooperation are of the utmost importance for effective utilization of the benefits of nuclear technology and to face the increasing demand for food for the ever increasing population in years to come 32 refs., 1 tab.

The Delphi technique in radiography education research

International Nuclear Information System (INIS)

John-Matthews, J.St.; Wallace, M.J.; Robinson, L.

2017-01-01

Objectives: To describe and review the Delphi technique as a tool for radiographers engaged in mixed-methods research whereby agreement is required on the proficiencies needed by educational programmes for pre- and post- registration radiographers. This is achieved through a description offering a brief history of the technique. Through a literature search, radiography education research using this technique is identified. A protocol for a research project using the technique is presented. Using this worked example, advantages and disadvantages of the method are explored including sampling of participants, sample size, number of rounds and methods of feedback. Key findings: There are limited examples of the use of the Delphi technique in radiography literature including considerations on how to select experts and panel size. Conclusion: The Delphi technique is a suitable method for establishing collective agreement in the design of radiography educational interventions. Additional research is needed to deepen this evidence-based knowledge. - Highlights: • The Delphi Technique is used to gain collective agreement in forecasting healthcare education priorities. • There is increase of the use of the technique in healthcare education literature. • There are some examples of the technique in radiography education research. • A worked example of this technique is provided to critically evaluate this tool.

Research on application of technique for analyzing system reliability, GO-FLOW

International Nuclear Information System (INIS)

Matsuoka, Takeshi; Fukuto, Junji; Sugasawa, Shinobu; Mitomo, Nobuo; Miyazaki, Keiko; Hirao, Yoshihiro; Kobayashi, Michiyuki

1997-01-01

As the method of evaluation, probabilistic safety assessment (PSA) has been introduced in nuclear power field, and began to play important role in plant design and safety examination. In the Ship Research Institute, as the technique for analyzing system reliability which takes the main part of PSA, the research on developing the GO-FLOW technique which has various advanced functions has been carried out. In this research, the functions of the GO-FLOW technique are improved, and the function of the dynamic behavior analysis for systems and the analysis function for the combination of the physical behavior of systems and the change of probabilistic events are developed, further, the function of extracting main accident sequence by utilizing the GO-FLOW technique is prepared. As for the analysis of dynamic behavior, the sample problem on hold-up tank was investigated. As to the extraction of main accident sequence, the fundamental part of the function of event tree analysis was consolidated, and the function of setting branching probability was given. As to the indication of plant behavior, the simulator for improved marine reactor MRX was developed. (K.I.)

Applications of nuclear techniques and research 1990

International Nuclear Information System (INIS)

1990-01-01

The application of nuclear techniques, i.e. those techniques where use is made of isotopes and radiation, continues to contribute to progress in science, technology, agriculture, industry and medicine. Nuclear applications found their way into the IAEA's activities from the very beginning, and their promotion constitutes today a substantial fraction of the IAEA's Technical Co-operation and Research Contract Programmes. The 1990 selection is opened by a review of the role and function of the IAEA's Research Contract Programme, which is one of the Agency's most effective tools for promoting and developing nuclear applications. Applications in agriculture are covered in two articles dealing respectively with issues affecting the acceptance of food irradiation by governments, the food industry and consumers and with the use of radiation to induce plant mutation, a practical tool available to plant breeders in their effort to develop better quality crops. The following article deals with a typical nuclear application in medicine, i.e. the use of radionuclides in the diagnosis of lung diseases and in investigations related to the respiratory function. The use of environmental isotopes to assess the energy potential of geothermal fields is the next subject, a good example of nuclear methods applied to the evaluation of natural resources. The 1990 review concludes with a presentation prepared by the Third World Academy of Sciences on magnetic fusion research activity in the developing countries and its connection with the IAEA's own fusion programme

Development and applications of microanalytical techniques

International Nuclear Information System (INIS)

Cholewa, M.

2005-05-01

The development of new analytical techniques is an essential part of our everyday life and is dictated by strong progress in modern science and technology. Both these areas require more precise information about materials and processes involved. Due to these requirements we have been observing a rapid growth in the development of techniques that require both a high spatial resolution and high sensitivity. Modern analytical techniques provide an important interface between science and applications. The works presented in this habilitation thesis span the period of almost 20 years. During this time the author has been leading the development and applications of several new analytical and micro analytical techniques which have been documented in this thesis. This development has required development of ideas, strong leadership, organisational skills, organisation of funds and groups to carry out the necessary work. In chapter 3 the use of the PIXE and XANES techniques described an investigation of permeability for selected elements inside cells. It was important to develop new protocols for sample preparation and analysis and a large number of cells were necessary in order to obtain meaningful data. This development was closely associated with work presented in chapter 4 where the role of sample damage under the MeV ion beam bombardment was investigated. At that time we were the leading group in the world to perform such studies. Chapter 5 describes development of new analytical techniques and its possible applications. Development of the SIHF has been probably the most demanding and difficult project and was described in chapter 6 and it was closely related with development of a diamond detector described in chapter 7. A great part of these works were performed by the author at the Micro Analytical Research Centre (MARC) in the School of Physics at the University of Melbourne in Australia. However, some works were performed at GSI in Germany and BNL in USA. (author)

Development of a tentacle propulsion technique for underwater application

International Nuclear Information System (INIS)

Alamgir, T; Rashid, M M; Khan, M R

2013-01-01

As robotic technology matures and more platforms are fielded in unstructured real-world situations, the more new areas of applications are being thought for robotic deployment. After successes in industrial robots, researchers are now trying to explore new robots with biological features of different biological creatures like, snake, bird, and spider for their stunning advantages. Underwater exploration using robots is a new avenue. Research on the tentacle robot for underwater application is a new field of research besides the other research in this arena. There are few researches on this topic are explored and mostly are on biological robot. Besides those researches this paper aims to propose and demonstrate another technique to build a tentacle for propulsion purposes. Therefore, in this paper will discuss more on mathematical development for the propulsion technique and its software verification technique in considering the environmental constrains

U.S.-GERMAN BILATERAL WORKING GROUP: International Research Cooperation to Develop and Evaluate Tools and Techniques for Revitalization of Potentially Contaminated Sites

Science.gov (United States)

The U.S. German Bilateral Working Group originated in 1990 in order to share and transfer information, ideas, tools and techniques regarding environmental research. The U.S. Environmental Protection Agency (EPA)/Office of Research and Development (ORD) and the German Federal Mini...

Recent progress on developments of tritium safe handling techniques in Japan

International Nuclear Information System (INIS)

Watanabe, Kuniaki; Matsuyama, Masao

1993-01-01

Vast amounts of tritium will be used for thermonuclear fusion reactors. Without establishing safe handling techniques for large amounts of tritium, undoubtedly the fusion reactors will not be accepted. Japanese activity on tritium related research has considerably developed in the last 10 years. This review paper gives a brief summary of safe handling techniques developed by Japanese research groups. (author)

A German research project about applicable graphite cutting techniques

International Nuclear Information System (INIS)

Holland, D.; Quade, U.; Bach, F.W.; Wilk, P.

2001-01-01

In Germany, too, quite large quantities of irradiated nuclear graphite, used in research and prototype reactors, are waiting for an environmental way of disposal. While incineration of nuclear graphite does not seem to be a publicly acceptable way, cutting and packaging into ductile cast iron containers could be a suitable way of disposal in Germany. Nevertheless, the cutting of graphite is also a very difficult technique by which a large amount of secondary waste or dust might occur. An applicable graphite cutting technique is needed. Therefore, a group of 13 German partners, consisting of one university, six research reactor operators, one technical inspection authority, three engineering companies, one industrial cutting specialist and one commercial dismantling company, decided in 1999 to start a research project to develop an applicable technique for cutting irradiated nuclear graphite. Aim of the project is to find the most suitable cutting techniques for the existing shapes of graphite blocks with a minimum of waste production rate. At the same time it will be learned how to sample the dust and collect it in a filter system. The following techniques will be tested and evaluated: thermal cutting, water jet cutting, mechanical cutting with a saw, plasma arc cutting, drilling. The subsequent evaluation will concentrate on dust production, possible irradiation of staff, time and practicability under different constraints. This research project is funded by the German Minister of Education and Research under the number 02 S 7849 for a period of two years. A brief overview about the work to be carried out in the project will be given. (author)

Report of the first research co-ordination meeting on the co-ordinated research programme: Development and selection of analytical techniques for measuring accidentally released radionuclides in environment

International Nuclear Information System (INIS)

2001-01-01

The participants at the second Research Co-ordination Meeting (Vienna, 12-16 August 1991) of the CRP on 'Rapid Instrumental and Separation Methods for Monitoring Radionuclides in Food and Environmental Samples', recommended that a new CRP be established. The current CRP on 'Development and Selection of Analytical Techniques and Procedures for Measuring Accidentally Released Radionuclides in Environment' was established based on this recommendation. The objectives of this CRP are to conduct research and development on applicable methodologies for response to accidental releases, and to improve and maintain the capabilities of the network of laboratories and provide training of individuals within member states. Thus, the CRP serves as a vehicle to maintain contact within the network of laboratories, while developing and transferring analytical techniques and procedures for measuring accidentally released radioactivity. The purpose of the Research Co-ordination Meeting is to discuss the proposed research programs, the status to date and the work planned for the duration of the CRP. The meeting also provides the opportunity for the CRP participants to exchange ideas and possibly develop collaborations in their research. The members of the CRP also need to discuss issues related to the previous CRP on Rapid methods. These include: the preparation of the final report of the previous CRP, the preparation of an addendum to TRS-295 and the ultimate revision or updating of TRS-295. Finally, it is intended that the members of the CRP should discuss the mandate and scope of work of the network of analytical laboratories and the steps needed to firmly establish this network

Provincial resource development research policy

Energy Technology Data Exchange (ETDEWEB)

Flock, D L

1976-01-01

In Alberta, there is an abundance of oil, natural gas, and coal. But only a small portion of the Alberta oil sands and coal resources are commercially accessible to surface-mining techniques. It is quite apparent that some in-situ technological breakthrough will be required, which will mean a concerted research effort at the provincial level. It is the purpose of this paper to present certain concepts and recommendations for a coordinated provincial resource development research policy for the Province of Alberta. Research as discussed in this paper covers basic and applied research and development. (MCW)

Development of three-dimensional radiotherapy techniques in breast cancer

Science.gov (United States)

Coles, Charlotte E.

Radiotherapy following conservation surgery decreases local relapse and death from breast cancer. Currently, the challenge is to minimise the morbidity caused by this treatment without losing efficacy. Despite many advances in radiation techniques in other sites of the body, the majority of breast cancer patients are still planned and treated using 2-dimensional simple radiotherapy techniques. In addition, breast irradiation currently consumes 30% of the UK's radiotherapy workload. Therefore, any change to more complex treatment should be of proven benefit. The primary objective of this research is to develop and evaluate novel radiotherapy techniques to decrease irradiation of normal structures and improve localisation of the tumour bed. I have developed a forward-planned intensity modulated (IMRT) breast radiotherapy technique, which has shown improved dosimetry results compared to standard breast radiotherapy. Subsequently, I have developed and implemented a phase III randomised controlled breast IMRT trial. This National Cancer Research Network adopted trial will answer an important question regarding the clinical benefit of breast IMRT. It will provide DNA samples linked with high quality clinical outcome data, for a national translational radiogenomics study investigating variation in normal tissue toxicity. Thus, patients with significant late normal tissue side effects despite good dose homogeneity will provide the best model for finding differences due to underlying genetics. I evaluated a novel technique using high definition free-hand 3-dimensional (3D) ultrasound in a phantom study, and the results suggested that this is an accurate and reproducible method for tumour bed localisation. I then compared recognised methods of tumour bed localisation with the 3D ultrasound method in a clinical study. The 3D ultrasound technique appeared to accurately represent the shape and spatial position of the tumour cavity. This tumour bed localisation research

Development of the decommissioning techniques for nuclear fuel cycle facilities

International Nuclear Information System (INIS)

Tanimoto, Ken-ichi; Sugaya, Toshikatsu; Hara, Mitsuo; Kikuchi, Yutaka; Tobita, Hiroo; Enokido, Yuji

1992-01-01

Being developed the basement techniques such as measurement, decontamination, dismantling, remote handling and data base. For the elevating and systematizing the basement techniques, thinking over the application, forward to the facility decommissionings in the future, including the technique of waste treatment in WDF and the achievement using the dismantling and recycling technique in renewaling the research facilities. (author)

The critical incident technique in dental research: A review

Directory of Open Access Journals (Sweden)

Binu Santha

2016-01-01

Full Text Available Research is a scientific quest to find answers to certain questions. It makes us think with curiosity and wonderment about how to make something better. Research contributes in a major way to the development and maintenance of health and health care systems. Qualitative research is concerned with qualitative phenomena and includes subjective assessment of attitudes, opinions, and behavior. It is especially important in the behavioral sciences where the aim is to discover the underlying motives of human behavior. The critical incident technique (CIT is a well-established qualitative research tool used in many areas of health sciences including nursing, medicine, dentistry, and their respective education systems. This technique is described as consisting of “a set of procedures for collecting direct observations of human behavior in such a way as to facilitate their potential usefulness in solving practical problems.” This review gives a gist of CIT and its application in different aspects of dental research.

Nuclear radioactive techniques applied to materials research

CERN Document Server

Correia, João Guilherme; Wahl, Ulrich

2011-01-01

In this paper we review materials characterization techniques using radioactive isotopes at the ISOLDE/CERN facility. At ISOLDE intense beams of chemically clean radioactive isotopes are provided by selective ion-sources and high-resolution isotope separators, which are coupled on-line with particle accelerators. There, new experiments are performed by an increasing number of materials researchers, which use nuclear spectroscopic techniques such as Mössbauer, Perturbed Angular Correlations (PAC), beta-NMR and Emission Channeling with short-lived isotopes not available elsewhere. Additionally, diffusion studies and traditionally non-radioactive techniques as Deep Level Transient Spectroscopy, Hall effect and Photoluminescence measurements are performed on radioactive doped samples, providing in this way the element signature upon correlation of the time dependence of the signal with the isotope transmutation half-life. Current developments, applications and perspectives of using radioactive ion beams and tech...

Status and developing of nuclear emergency response techniques in China

International Nuclear Information System (INIS)

Jiangang, Zhang; Bing, Zhao; Rongyao, Tang; Xiaoxiao, Xu

2008-01-01

Full text: Nuclear Emergency preparedness and response in China is consistent with international basic principle of nuclear safety and emergency response. Nuclear emergency response techniques in China developed with nuclear power from 1980s. The status of nuclear emergency techniques in China are: 1) China have plentiful experiences and abilities in the fields of nuclear facility emergency planning and preparedness, nuclear accident consequence assessment, emergency monitoring, and emergency advisory; 2) Emergency assistance ability in China has a foundation, however it cannot satisfy national requirement; 3) Emergency planning and preparedness is not based on hazard assessment; 4) Remote monitoring and robot techniques in not adaptable to the requirements of nuclear emergency response; 5) A consistent emergency assessment system is lack in China. In this paper, it is analyzed what is the developing focal points of nuclear emergency response techniques in China, and it is proposed that the main points are: a) To develop the research of emergency preparedness on the base of hazard analysis; b) To improve remote monitoring and robot ability during nuclear emergency; c) To develop the response technique research with anti-terrorism. (author)

Mobile phone interaction techniques for rural economy development ...

African Journals Online (AJOL)

The objective of this study is to identify the various researches on interaction techniques and user interface design as a first step to the design of suitable mobile interactions and user interfaces for rural users. This research project is also aimed at socio-economic development and adding value to mobile phone users in ...

Development of the fundamental techniques for nuclear forensics

Energy Technology Data Exchange (ETDEWEB)

Park, Jongho; Song, Kyuseok; Ha, Younggeun; Lee, Sunyoung; Choi, Heedong

2013-08-15

The main goal of this project is to develop the fundamental techniques of physical and chemical analysis of the target materials, and data interpretation methods to identify the origin and the production attributions of intercepted illicit nuclear or radioactive materials. This also includes production of analytical data for domestic nuclear materials to be used in establishment of national nuclear material data library. As the result of the R and D of this project, we developed the analytical techniques for H and O isotopes to identify the origin of the target samples, the techniques of chemical treatments of water type and soil type samples, and the fundamental research on the gamma spectroscopy for nuclear forensics. We also performed the study on the national collaboration plan on nuclear forensics, and fundamental research and the target materials and analytical requirements for analytical data production of domestic nuclear materials to construct a national data library. Most of the R and D's in the schedule of this project have not been performed due to the early termination of the project by the decision of the government.

Development of the fundamental techniques for nuclear forensics

International Nuclear Information System (INIS)

Park, Jongho; Song, Kyuseok; Ha, Younggeun; Lee, Sunyoung; Choi, Heedong

2013-08-01

The main goal of this project is to develop the fundamental techniques of physical and chemical analysis of the target materials, and data interpretation methods to identify the origin and the production attributions of intercepted illicit nuclear or radioactive materials. This also includes production of analytical data for domestic nuclear materials to be used in establishment of national nuclear material data library. As the result of the R and D of this project, we developed the analytical techniques for H and O isotopes to identify the origin of the target samples, the techniques of chemical treatments of water type and soil type samples, and the fundamental research on the gamma spectroscopy for nuclear forensics. We also performed the study on the national collaboration plan on nuclear forensics, and fundamental research and the target materials and analytical requirements for analytical data production of domestic nuclear materials to construct a national data library. Most of the R and D's in the schedule of this project have not been performed due to the early termination of the project by the decision of the government

PRINTING TECHNIQUES: RECENT DEVELOPMENTS IN PHARMACEUTICAL TECHNOLOGY.

Science.gov (United States)

Jamroz, Witold; Kurek, Mateusz; Lyszczarz, Ewelina; Brniak, Witold; Jachowicz, Renata

2017-05-01

In the last few years there has been a huge progress in a development of printing techniques and their application in pharmaceutical sciences and particularly in the pharmaceutical technology. The variety of printing methods makes it necessary to systemize them, explain the principles of operation, and specify the possibilities of their use in pharmaceutical technology. This paper aims to review the printing techniques used in a drug development process. The growing interest in 2D and 3D printing methods results in continuously increasing number of scientific papers. Introduction of the first printed drug Spritam@ to the market seems to be a milestone of the 3D printing development. Thus, a particular aim of this review is to show the latest achievements of the researchers in the field of the printing medicines.

The development of digital monitoring technique

International Nuclear Information System (INIS)

Koo, In Soo; Kim, D. H.; Kim, J. S.; Kim, C. H.; Kim, G. O.; Park, H. Y.; Suh, S. Y.; Sung, S. H.; Song, S. J.; Lee, C. K.; Jang, G. S.; Hur, S.

1997-08-01

A study has been performed for advanced DSP technology for the digital nuclear I and C systems for the monitoring and diagnosis techniques for high-pressurized structures integrity in NSSS. In the development of advanced DSP technology, real time process, communication network and signal validation were selected as the essential technologies of the digital signal process, and the requirements and methodology for the application of these technologies in NPP were established through technical analysis. Based on its results, the DPIS and the signal validation algorithm were developed. For the real-time process, the necessary requirements were define and the methodology of real-time software modeling was developed. For the communication network, the methodology of selection of the communication technique and developing procedure were established with an extraction of requirements. Functions, requirements, structure and technical specification were developed for the DPIS, and a real-time signal validation algorithm was developed and implemented for the signal validation. In a study on monitoring techniques for abnormal conditions, test and experimental facilities have been set up in order to carry out the required tests during research activities. Studies concentrated on how to acquire proper vibration or emission signals from mechanical structures and equipments, and to diagnose effectively the abnormal conditions of high pressure structure integrity. The algorithms of automatic signal analysis and diagnosis for abnormal conditions have been developed in this study to assist the operator's monitoring and diagnosis activities on structure integrity using new technologies. (author). 23 refs., 68 tabs., 196 figs

The development of digital monitoring technique

Energy Technology Data Exchange (ETDEWEB)

Koo, In Soo; Kim, D. H.; Kim, J. S.; Kim, C. H.; Kim, G. O.; Park, H. Y.; Suh, S. Y.; Sung, S. H.; Song, S. J.; Lee, C. K.; Jang, G. S.; Hur, S.

1997-08-01

A study has been performed for advanced DSP technology for the digital nuclear I and C systems for the monitoring and diagnosis techniques for high-pressurized structures integrity in NSSS. In the development of advanced DSP technology, real time process, communication network and signal validation were selected as the essential technologies of the digital signal process, and the requirements and methodology for the application of these technologies in NPP were established through technical analysis. Based on its results, the DPIS and the signal validation algorithm were developed. For the real-time process, the necessary requirements were define and the methodology of real-time software modeling was developed. For the communication network, the methodology of selection of the communication technique and developing procedure were established with an extraction of requirements. Functions, requirements, structure and technical specification were developed for the DPIS, and a real-time signal validation algorithm was developed and implemented for the signal validation. In a study on monitoring techniques for abnormal conditions, test and experimental facilities have been set up in order to carry out the required tests during research activities. Studies concentrated on how to acquire proper vibration or emission signals from mechanical structures and equipments, and to diagnose effectively the abnormal conditions of high pressure structure integrity. The algorithms of automatic signal analysis and diagnosis for abnormal conditions have been developed in this study to assist the operator`s monitoring and diagnosis activities on structure integrity using new technologies. (author). 23 refs., 68 tabs., 196 figs.

Some developments in safeguards techniques

International Nuclear Information System (INIS)

Beets, C.

1977-01-01

The fundamental principles of safeguards and the research and development of safeguards techniques are described. Safeguard accountancy based upon the partition of the fuel cycle into suitable material balance areas will be further improved. Implementation of international safeguards in the European fuel fabrication and reprocessing facilities is described. The effectiveness of a material accounting system depends on the quality of the quantitative data. The allocation of the tasks in the framework of an integrated safeguards is concerned with R and D work only and has no bearing on the allocation of the implementation costs. Bulk measurements, sampling and destructive or non-destructive analysis of samples are described for the determination of batch data. Testing of the safeguards techniques as a keystone in relation to plant instrumentation programmes are still being developed throughout the world. In addition to accountancy and control, it also includes an effective physical security program. The system of international safeguards that prevailed in the sixties has been re-modelled to comply with the new requirements of the Non-Proliferation Treaty and with the growth of nuclear energy

Research and development program 1985

International Nuclear Information System (INIS)

1984-01-01

In this report the research and development program of the GSI Darmstadt is described. It concerns heavy ion reactions, nuclear structure studies, exotic nuclei, nuclear theory, atomic collisions with heavy ions, atomic spectroscopy, the interaction of heavy ions with matter, atomic theory, biological studies with heavy ions, nuclear track techniques, UNILAC developments, acquisition of experimental data, and the development of new accelerators, ion sources, targets, and detectors. (HSI) [de

A Proposal for Research and Development of an Explosive Drilling Technique for Geothermal Wells

Energy Technology Data Exchange (ETDEWEB)

None

1975-10-01

In order to make large scale use of the geothermal energy available it will be necessary to drill many thousands of holes deep into the earth. The objective of the proposed research is to greatly decrease drilling time and cost. Studies made of a new explosive drilling technique indicate that savings in time of from 70 to 80 percent. The research plan is to utilize explosive in the form of multiple-faced shaped charge capsules. [DJE-2005

Underwater cutting techniques developments

International Nuclear Information System (INIS)

Bach, F.-W.

1990-01-01

The primary circuit structures of different nuclear powerplants are constructed out of stainless steels, ferritic steels, plated ferritic steels and alloys of aluminium. According to the level of the specific radiation of these structures, it is necessary for dismantling to work with remote controlled cutting techniques. The most successful way to protect the working crew against exposure of radiation is to operate underwater in different depths. The following thermal cutting processes are more or less developed to work under water: For ferritic steels only - flame cutting; For ferritic steels, stainless steels, cladded steels and aluminium alloys - oxy-arc-cutting, arc-waterjet-cutting with a consumable electrode, arc-saw-cutting, plasma-arc-cutting and plasma-arc-saw. The flame cutting is a burning process, all the other processes are melt-cutting processes. This paper explains the different techniques, giving a short introduction of the theory, a discussion of the possibilities with the advantages and disadvantages of these processes giving a view into the further research work in this interesting field. (author)

Development of new techniques and enhancement of automatic capability of neutron activation analysis at the Dalat Research Reactor

International Nuclear Information System (INIS)

Ho Manh Dung; Ho Van Doanh; Tran Quang Thien; Pham Ngoc Tuan; Pham Ngoc Son; Tran Quoc Duong; Nguyen Van Cuong; Nguyen Minh Tuan; Nguyen Giang; Nguyen Thi Sy

2017-01-01

The techniques of neutron activation analysis (NAA) including cyclic, epithermal and prompt-gamma (CNAA, ENAA and PGNAA, respectively) have been developed at the Dalat research reactor (DRR). In addition, the efforts has been spent to improve the automatic capability of irradiation, measurement and data processing of NAA. The renewal of necessary devices/tools for sample preparation have also been done. Eventually, the performance and the utility in terms of sensitivity, accuracy and stability of the analytical results generated by NAA at DRR have significantly been improved. The main results of the project are: 1) Upgrading of the fast irradiation system on Channel 13-2/TC to allow the cyclic irradiations; 2) Development of CNAA; 3) Development of ENAA; 4) Application of k0-method for PGNAA; 5) Investigation of the automatic sample changer (ASC2); 6) Upgrading of Ko-DALAT software for ENAA and modification of k0-IAEA software for CNAA and PGNAA; and 7) Optimization of irradiation and measurement facilities as well as sample preparation devices/tools. A set of procedures of relevant developed techniques in the project were established. The procedures have been evaluated by analysis of the reference materials for which they are meeting the requirements of multi-element analysis for the intended applications. (author)

Research and development of radiation utilizations in 1981 at JAERI

International Nuclear Information System (INIS)

1981-01-01

There is the field of radiation utilization such as the application of the effect of radiation on matters and the techniques of measurement and analysis utilizing the properties of radiation, in addition to the use of atomic energy as heat or electric power. The fields of application of radiation utilization are very wide, and are closely related to the health and daily life of people. The Japan Atomic Energy Research Institute has performed the research and development on radiation utilization regarding radiochemistry, the application of irradiation, and the production and industrial utilization of radioisotopes. Also, the research of the radiation resistance of organic materials used for nuclear facilities, the development of organic materials, and the production of tritium have become necessary. In this booklet, the recent results of radiation utilization in the JAERI are summarized. The research and development of ion exchange membranes, organic glasses, the fixation of living body activators and water paints, the techniques of utilizing irradiation, the techniques of radioisotope productions and utilization, and the techniques related to the development of atomic energy are reported. (Kako, I.)

Techniques involving extreme environment, nondestructive techniques, computer methods in metals research, and data analysis

International Nuclear Information System (INIS)

Bunshah, R.F.

1976-01-01

A number of different techniques which range over several different aspects of materials research are covered in this volume. They are concerned with property evaluation of 4 0 K and below, surface characterization, coating techniques, techniques for the fabrication of composite materials, computer methods, data evaluation and analysis, statistical design of experiments and non-destructive test techniques. Topics covered in this part include internal friction measurements; nondestructive testing techniques; statistical design of experiments and regression analysis in metallurgical research; and measurement of surfaces of engineering materials

Endplug Welding Techniques developed for SFR Metallic Fuel Elements

Energy Technology Data Exchange (ETDEWEB)

Lee, Jung Won; Kim, Soo Sung; Woo, Yoon Myeng; Kim, Hyung Tae; Lee, Ho Jin; Kim, Ki Hwan [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2013-10-15

In Korea, the R and D on SFR has been begun since 1997, as one of the national long-term nuclear R and D programs. The international collaborative research is under way on fuel developments within Advanced Fuel Project for Gen-IV SFR with the closed fuel cycle of full actinide recycling, while TRU bearing metallic fuel, U-TRU-Zr alloy fuel, was selected and is being developed. For the fabrication of SFR metallic fuel elements, the endplug welding is a crucial process. The sealing of endplug to cladding tube should be hermetically perfect to prevent a leakage of fission gases and to maintain a good reactor performance. In this study, the welding technique, welding equipment, welding conditions and parameters were developed to make SFR metallic fuel elements. The TIG welding technique was adopted and the welding joint design was developed. And the optimal welding conditions and parameters were also established. In order to make SFR metallic fuel elements, the welding technique, welding equipment, welding conditions and parameters were developed. The TIG welding technique was adopted and the welding joint design was developed. And the optimal welding conditions and parameters were also established.

Endplug Welding Techniques developed for SFR Metallic Fuel Elements

International Nuclear Information System (INIS)

Lee, Jung Won; Kim, Soo Sung; Woo, Yoon Myeng; Kim, Hyung Tae; Lee, Ho Jin; Kim, Ki Hwan

2013-01-01

In Korea, the R and D on SFR has been begun since 1997, as one of the national long-term nuclear R and D programs. The international collaborative research is under way on fuel developments within Advanced Fuel Project for Gen-IV SFR with the closed fuel cycle of full actinide recycling, while TRU bearing metallic fuel, U-TRU-Zr alloy fuel, was selected and is being developed. For the fabrication of SFR metallic fuel elements, the endplug welding is a crucial process. The sealing of endplug to cladding tube should be hermetically perfect to prevent a leakage of fission gases and to maintain a good reactor performance. In this study, the welding technique, welding equipment, welding conditions and parameters were developed to make SFR metallic fuel elements. The TIG welding technique was adopted and the welding joint design was developed. And the optimal welding conditions and parameters were also established. In order to make SFR metallic fuel elements, the welding technique, welding equipment, welding conditions and parameters were developed. The TIG welding technique was adopted and the welding joint design was developed. And the optimal welding conditions and parameters were also established

A review of second law techniques applicable to basic thermal science research

Science.gov (United States)

Drost, M. Kevin; Zamorski, Joseph R.

1988-11-01

This paper reports the results of a review of second law analysis techniques which can contribute to basic research in the thermal sciences. The review demonstrated that second law analysis has a role in basic thermal science research. Unlike traditional techniques, second law analysis accurately identifies the sources and location of thermodynamic losses. This allows the development of innovative solutions to thermal science problems by directing research to the key technical issues. Two classes of second law techniques were identified as being particularly useful. First, system and component investigations can provide information of the source and nature of irreversibilities on a macroscopic scale. This information will help to identify new research topics and will support the evaluation of current research efforts. Second, the differential approach can provide information on the causes and spatial and temporal distribution of local irreversibilities. This information enhances the understanding of fluid mechanics, thermodynamics, and heat and mass transfer, and may suggest innovative methods for reducing irreversibilities.

FY 1998 annual report on the results of new industry creation type industrial science and technology research and development on the research and development of supermetals. Development of techniques for controlling structures of nano-amorphous materials; 1998 nendo super metal no gijutsu kaihatsu. Nano amorphous kozo seigyo zairyo no gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Described herein are the FY 1998 results of the development of techniques for controlling structures of nano-amorphous materials. For the development of techniques for finely dispersing fine particles, mechanical alloying (MA) and mechanical milling (MM) are investigated, to structure nano-crystals in common steel, for which hot isostatic pressing is evaluated as a consolidation process for the MA- and MM-prepared powders in the FY 1998. For researches on high-speed particle deposition and super plastic forming, an Al-Ni, Al-Fe and Al-Ti alloy are selected as the nano-structure materials to be prepared by evaporation, and various compositions of these systems are evaporated, in order to investigate their microstructures, mechanical properties and thermal stabilities. For researches on techniques for controlling phases with the aid of high-density energy, the R and D efforts are directed to exploration of composition of high resistance to corrosion by acid at dew point, preparation of non-equilibrium (e.g., amorphous) powders, and development of solidification and forming techniques, with the target of creation of an amorphous alloy showing corrosion resistance at least twice as high as that of the commercial corrosion-resistance material and formable into a bulk shape having a thickness of at least 1 mm. For researches on controlled cooling techniques, the basic data are collected. (NEDO)

DEVELOPMENT AND EVALUATION OF TECHNOLOGY EDUCATION USING EARTH OBSERVATION TECHNIQUE

Directory of Open Access Journals (Sweden)

Y. Ito

2012-07-01

Full Text Available In the present study, we introduce to secondary education an Earth observation technique using synthetic aperture radar (SAR. The goal is to increase interest in and raise the awareness of students in the Earth observation technique through practical activities. A curriculum is developed based on the result of questionnaire surveys of school teachers. The curriculum is composed of 16 units. Teaching materials related to the Earth observation technique are researched and developed. We designed a visual SAR processor and a small corner reflector (CR as a new teaching technique. In teaching sessions at secondary school, the developed teaching materials and software were used effectively. In observation experiments, students set up CRs that they had built, and ALOS PALSAR was able to clearly observe all of the CRs. The proposed curriculum helped all of the students to understand the usefulness of the Earth observation technique.

Ethnomathematical research and drama in education techniques: developing a dialogue in a geometry class of 10th grade students

Directory of Open Access Journals (Sweden)

Charoula Stathopoulou

2015-07-01

Full Text Available Ethnomathematical research, together with digital technologies (WebQuest and Drama-in-Education (DiE techniques, can create a fruitful learning environment in a mathematics classroom—a hybrid/third space—enabling increased student participation and higher levels of cognitive engagement. This article examines how ethnomathematical ideas processed within the experiential environment established by the Drama-in-Education techniques challenged students‘ conceptions of the nature of mathematics, the ways in which students engaged with mathematics learning using mind and body, and the ‗dialogue‘ that was developed between the Discourse situated in a particular practice and the classroom Discourse of mathematics teaching. The analysis focuses on an interdisciplinary project based on an ethnomathematical study of a designing tradition carried out by the researchers themselves, involving a search for informal mathematics and the connections with context and culture; 10th grade students in a public school in Athens were introduced to the mathematics content via an original WebQuest based on this previous ethnomathematical study; Geometry content was further introduced and mediated using the Drama-in-Education (DiE techniques. Students contributed in an unfolding dialogue between formal and informal knowledge, renegotiating both mathematical concepts and their perception of mathematics as a discipline.

Ethnomathematical research and drama in education techniques: developing a dialogue in a geometry class of 10th grade students

Directory of Open Access Journals (Sweden)

Charoula Stathopoulou

2015-01-01

Full Text Available Ethnomathematical research, together with digital technologies (WebQuest and Drama-in-Education (DiE techniques, can create a fruitful learning environment in a mathematics classroom—a hybrid/third space—enabling increased student participation and higher levels of cognitive engagement. This article examines how ethnomathematical ideas processed within the experiential environment established by the Drama-in-Education techniques challenged students‘ conceptions of the nature of mathematics, the ways in which students engaged with mathematics learning using mind and body, and the ‗dialogue‘ that was developed between the Discourse situated in a particular practice and the classroom Discourse of mathematics teaching. The analysis focuses on an interdisciplinary project based on an ethnomathematical study of a designing tradition carried out by the researchers themselves, involving a search for informal mathematics and the connections with context and culture; 10th grade students in a public school in Athens were introduced to the mathematics content via an original WebQuest based on this previous ethnomathematical study; Geometry content was further introduced and mediated using the Drama-in-Education (DiE techniques. Students contributed in an unfolding dialogue between formal and informal knowledge, renegotiating both mathematical concepts and their perception of mathematics as a discipline.

FY 1998 annual report on the development of fuel cell power generation techniques. Research and development of solid electrolyte fuel cells (research results); 1998 nendo nenryo denchi gijutsu kaihatsu. Kotai denkaishitsugata nenryo denchi no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Described herein are the FY 1998 research and development results of solid electrolyte fuel cells. For R and D of the tubular type cell by the wet processing technique, the tests are conducted to evaluate the initial performance and long-term durability for continuous operation of the single tubular cell. For development of the several-kW class modules, computer-aided simulations are conducted. For R and D of material and substrate techniques, the thermal cycle characteristics, cell characteristics and stress of the cell modules are evaluated, in order to evaluate their reliability. The thermal cycle test results indicate that performance of the single-stage cell is unaffected by the thermal cycles. It is found by the stress evaluation that use of the separator plate having a higher thermal expansion coefficient than the electrolyte plate and use of the sealant having a thermal expansion coefficient close to that of the electrolyte plate are effective means to reduce stresses. For the research to reduce costs of the cell materials, their chemical, mechanical and thermal characteristics are evaluated. For the system research, the areas for which the compact systems are suitable and their optimization are studied. (NEDO)

Are current coaching recommendations for cricket batting technique supported by biomechanical research?

Science.gov (United States)

Penn, Melissa J; Spratford, Wayne

2012-09-01

Coaching manuals are an invaluable tool for coaches, used in player skill and technique development, especially at grass-roots level. Commonly developed by former players and coaches, this information is generally based on anecdotal evidence and in general lacks the scientific rigour of a peer-reviewed journal. Thus there is a need to establish the level of agreement and support between the coaching and biomechanical literature. In doing so, evidence-based coaching practices can be optimally developed. Moreover, this will ensure the technique and skill development practices implemented at grass-roots level are supported by successful performance in the later stages of player development. The purpose of this review was to evaluate the latest batting biomechanics research, providing a comprehensive and up-to-date insight into the kinematic and kinetic aspects of batting in cricket. Furthermore, this review compared and contrasted this research with a selection of coaching literature, establishing a strong level of support and agreement between the coaching and biomechanical literature in recommendations for cricket batting technique. Although the ambiguity in a number of coaching concepts still exists, coaches and players can be confident in the successful implementation of both sources of information in a player's technical development.

ARDENT to develop advanced dosimetric techniques

CERN Document Server

Antonella Del Rosso

2012-01-01

Earlier this week, the EU-supported Marie Curie training network ARDENT kicked off at a meeting held at CERN. The overall aim of the project is the development of advanced instrumentation for radiation dosimetry. The applications range from radiation measurements around particle accelerators, onboard commercial flights and in space, to the characterization of radioactive waste and medicine, where accurate dosimetry is of vital importance.   The ARDENT (Advanced Radiation Dosimetry European Network Training) project is both a research and a training programme, which aims at developing new dosimetric techniques while providing 15 Early-Stage Researchers (ESR) with state-of-the-art training. The project, coordinated by CERN, is funded by the European Union with a contribution of about 3.9 million euros over four years. The ARDENT initiative will focus on three main technologies: gas detectors, in particular Gas Electron Multipliers (GEM) and Tissue Equivalent Proportional Counters (TEPC); solid stat...

Development of sensing techniques for weaponry health monitoring

Science.gov (United States)

Edwards, Eugene; Ruffin, Paul B.; Walker, Ebonee A.; Brantley, Christina L.

2013-04-01

Due to the costliness of destructive evaluation methods for assessing the aging and shelf-life of missile and rocket components, the identification of nondestructive evaluation methods has become increasingly important to the Army. Verifying that there is a sufficient concentration of stabilizer is a dependable indicator that the missile's double-based solid propellant is viable. The research outlined in this paper summarizes the Army Aviation and Missile Research, Development, and Engineering Center's (AMRDEC's) comparative use of nanoporous membranes, carbon nanotubes, and optical spectroscopic configured sensing techniques for detecting degradation in rocket motor propellant. The first sensing technique utilizes a gas collecting chamber consisting of nanoporous structures that trap the smaller solid propellant particles for measurement by a gas analysis device. In collaboration with NASA-Ames, sensing methods are developed that utilize functionalized single-walled carbon nanotubes as the key sensing element. The optical spectroscopic sensing method is based on a unique light collecting optical fiber system designed to detect the concentration of the propellant stabilizer. Experimental setups, laboratory results, and overall effectiveness of each technique are presented in this paper. Expectations are for the three sensing mechanisms to provide nondestructive evaluation methods that will offer cost-savings and improved weaponry health monitoring.

Ecotribology research developments

CERN Document Server

2016-01-01

This book presents resent research advances in the area of eco-triobology. In the last years, eco-tribology or environmentally friendly tribology has gained increasing importance in sustainable engineering. Environmentally acceptable tribological practices save resources by optimizing product usage and reducing energy. This book covers current developments in all areas covered by the term eco-tribology, including biomimetics surfaces, control of friction and wear, environmental aspects of lubrication and surface modification techniques as well as tribological aspects of green applications, such wind-power turbines or solar panels.

Developing research priorities for palliative care of people with intellectual disabilities in Europe: a consultation process using nominal group technique.

Science.gov (United States)

Tuffrey-Wijne, I; Wicki, M; Heslop, P; McCarron, M; Todd, S; Oliver, D; de Veer, A; Ahlström, G; Schäper, S; Hynes, G; O'Farrell, J; Adler, J; Riese, F; Curfs, L

2016-03-24

Empirical knowledge around palliative care provision and needs of people with intellectual disabilities is extremely limited, as is the availability of research resources, including expertise and funding. This paper describes a consultation process that sought to develop an agenda for research priorities for palliative care of people with intellectual disabilities in Europe. A two-day workshop was convened, attended by 16 academics and clinicians in the field of palliative care and intellectual disability from six European countries. The first day consisted of round-table presentations and discussions about the current state of the art, research challenges and knowledge gaps. The second day was focused on developing consensus research priorities with 12 of the workshop participants using nominal group technique, a structured method which involved generating a list of research priorities and ranking them in order of importance. A total of 40 research priorities were proposed and collapsed into eleven research themes. The four most important research themes were: investigating issues around end of life decision making; mapping the scale and scope of the issue; investigating the quality of palliative care for people with intellectual disabilities, including the challenges in achieving best practice; and developing outcome measures and instruments for palliative care of people with intellectual disabilities. The proposal of four major priority areas and a range of minor themes for future research in intellectual disability, death, dying and palliative care will help researchers to focus limited resources and research expertise on areas where it is most needed and support the building of collaborations. The next steps are to cross-validate these research priorities with people with intellectual disabilities, carers, clinicians, researchers and other stakeholders across Europe; to validate them with local and national policy makers to determine how they could best be

Research and development of the industrial basic techniques of the next generation. Composite materials (Final research and development evaluation / Part 1); Jisedai dangyo kiban gijutsu kenkyu kaihatsu. Fukugo zairyo (Saishu kenkyu kaihatsu hyoka 1)

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-05-01

This R and D project is aimed at development of highly functional materials for aerospace devices, bringing into focus research and development of resin-based composite materials (FRPs), metal-based composite materials (FRMs), and evaluation of their properties and their design techniques. The basic target properties are heat resistance temperature of 250 degrees C or higher and tensile strength of 240 kg/mm{sup 2} or more for the FRPs, and heat resistance temperature of 450 degrees C or higher and tensile strength of 150 kgf/mm{sup 2} or more for the FRMs. This R and D program has been implemented for 8 years for development of raw materials, molding/processing techniques, quality evaluation and designs through information exchange and discussions of the experts in each area under integrated, close cooperation from raw materials to molding/processing. Most of the data indicate that the target properties and objects are satisfied or exceeded. It is therefore concluded that this project for the composite materials, extending for 8 years in 3 phases, has sufficiently achieved the initial objects. The unique techniques are incorporated in the raw materials, molding/processing processes, quality evaluation and designs. These efforts have produced the FRPs and FRMs of the world highest qualities. (NEDO)

FY 1985 annual report on the research and development of automatic sewing systems. Sewing/assembling techniques; 1985 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. Hosei kumitate gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1986-03-01

The automatic sewing system technique research association has been commissioned by the Agency of Industrial Science and Technology for (research and development of automatic sewing systems). This program covers R and D of the elementary techniques for total systems and sewing preparation/processing, sewing/assembling, cloth handling, and system management/control. This report describes the results of the R and D efforts for the sewing/assembling techniques. The sewing/assembling techniques cover a range from pretreatment of cut pieces for clothes to finishing pressing via parts sewing/assembling. They fall into 3 sub-elementary technical groups, (1) sewing pretreatment techniques, (2) high-function sewing techniques and (3) high-function pressing techniques. The FY 1985 efforts are mainly directed to designs and construction of a prototype and evaluation thereof, based on the FY 1984 results for designs/construction/evaluation of a principle-confirming model. These techniques are evaluated in comparison with those for the current sewing works. The results have confirmed that the elementary techniques have been developed to a level that their validity is concretely recognized. (NEDO)

Recent developments in monoclonal antibody radiolabeling techniques

International Nuclear Information System (INIS)

Srivastava, S.C.; Mease, R.C.

1989-01-01

Monoclonal antibodies (MAbs) have shown the potential to serve as selective carriers of radionuclides to specific in vivo antigens. Accordingly, there has been an intense surge of research activity in an effort to develop and evaluate MAb-based radiopharmaceuticals for tumor imaging (radioimmunoscintigraphy) and therapy (radioimmunotherapy), as well as for diagnosing nonmalignant diseases. A number of problems have recently been identified, related to the MAbs themselves and to radiolabeling techniques, that comprise both the selectivity and the specificity of the in vivo distribution of radiolabeled MAbs. This paper will address some of these issues and primarily discuss recent developments in the techniques for radiolabeling monoclonal antibodies that may help resolve problems related to the poor in vivo stability of the radiolabel and may thus produce improved biodistribution. Even though many issues are identical with therapeutic radionuclides, the discussion will focus mainly on radioimmunoscintigraphic labels. 78 refs., 6 tabs

Recent developments in monoclonal antibody radiolabeling techniques

Energy Technology Data Exchange (ETDEWEB)

Srivastava, S.C.; Mease, R.C.

1989-01-01

Monoclonal antibodies (MAbs) have shown the potential to serve as selective carriers of radionuclides to specific in vivo antigens. Accordingly, there has been an intense surge of research activity in an effort to develop and evaluate MAb-based radiopharmaceuticals for tumor imaging (radioimmunoscintigraphy) and therapy (radioimmunotherapy), as well as for diagnosing nonmalignant diseases. A number of problems have recently been identified, related to the MAbs themselves and to radiolabeling techniques, that comprise both the selectivity and the specificity of the in vivo distribution of radiolabeled MAbs. This paper will address some of these issues and primarily discuss recent developments in the techniques for radiolabeling monoclonal antibodies that may help resolve problems related to the poor in vivo stability of the radiolabel and may thus produce improved biodistribution. Even though many issues are identical with therapeutic radionuclides, the discussion will focus mainly on radioimmunoscintigraphic labels. 78 refs., 6 tabs.

Nanopositioning techniques development for synchrotron radiation instrumentation applications at the Advanced Photon Source

International Nuclear Information System (INIS)

Shu Deming

2010-01-01

At modern synchrotron radiation sources and beamlines, high-precision positioning techniques present a significant opportunity to support state-of-the-art synchrotron radiation research. Meanwhile, the required instrument positioning performance and capabilities, such as resolution, dynamic range, repeatability, speed, and multiple axes synchronization are exceeding the limit of commercial availability. This paper presents the current nanopositioning techniques developed for the Argonne Center for Nanoscale Materials (CNM)/Advanced Photon Source (APS) hard x-ray nanoprobe and high-resolution x-ray monochromators and analyzers for the APS X-ray Operations and Research (XOR) beamlines. Future nanopositioning techniques to be developed for the APS renewal project will also be discussed.

Annual report 1992 on research and development work by the IMF, Institute for Materials Research

International Nuclear Information System (INIS)

1993-03-01

The present annual report describes the activities undertaken by the IMF in the following areas: 1. Low-pollutant and low-waste techniques (treatment and utilization of special wastes); 2. Nuclear fusion (studies for NET/ITER; structural materials for fusion devices; superconducting magnets; plasmas heating technique; blanket development; component-related safety investigations); 3. Nuclear safety research (safety and materials of fast breeders; transient behaviour of fast breeder fuel elements; LWR-oriented safety research; containment concepts for PWR-plants); 4. Nuclear waste management (materials studies of waste forms); 5. Superconductivity (superconductor developments); 6. Microsystems engineering (development and testing of compact and laminated materials of microsystems engineering); 7. Handling technique (remote handling components for invasive surgery); 8. Materials and interfaces (inter alia high-performance ceramics, failure behaviour, LCP, biomechanics). The appendix lists all publications or primary reports by the IMF in 1992. (orig./HP) [de

Developing Techniques for Small Scale Indigenous Molybdenum-99 Production Using LEU Fission at Tajoura Research Center-Libya [Country report: Libya

International Nuclear Information System (INIS)

Alwaer, Sami M.

2015-01-01

The object of this work was to assist the IAEA by providing the Libyan country report about the Coordination Research Project (CRP), on the subject of “Developing techniques for small scale indigenous Mo-99 production using LEU-foil” which took place over five years and four RCMs. A CRP on this subject was approved in early 2005. The objectives of this CRP are to: transfer know-how in the area of 99 Mo production using LEU targets based on reference technologies from leading laboratories in the field to the participating laboratories in the CRP; develop national work plans based on various stages of technical development and objectives in this field; establish the procedures and protocols to be employed, including quality control and assurance procedures; establish the coordinated activities and programme for preparation, irradiation, and processing of LEU targets [a]; and to compare results obtained in the implementation of the technique in order to provide follow up advice and assistance. Technetium-99m ( 99m Tc), the daughter product of molybdenum-99 ( 99 Mo), is the most commonly utilized medical radioisotope in the world, used for approximately 20-25 million medical diagnostic procedures annually, comprising some 80% of all diagnostic nuclear medicine procedures. National and international efforts are underway to shift the production of medical isotopes from highly enriched uranium (HEU) to low enriched uranium (LEU) targets. A small but growing amount of the current global 99 Mo production is derived from the irradiation of LEU targets. The IAEA became aware of the interest of a number of developing Member States that are seeking to become small scale, indigenous producers of 99 Mo to meet local nuclear medicine requirements. The IAEA initiated Coordinated Research Project (CRP) T.1.20.18 “Developing techniques for small-scale indigenous production of Mo-99 using LEU or neutron activation” in order to assist countries in this field. The more

Development of cancer therapy facility of HANARO and medical research in BNCT; development of the technique for boron concentration analysis

Energy Technology Data Exchange (ETDEWEB)

Choi, Hee Dong; Byun, Soo Hyun; Sun, Gwang Min; Kim, Suk Kwon; Kim, In Jung; Park, Chang Su [Seoul National University, Seoul (Korea)

2002-03-01

Objective and Necessity of the Project- Development of a boron concentration analysis facility used for BNCT. - Development of the technique for boron concentration analysis. Contents and Scopes of the Project - Construction of the boron concentration analysis facility based on PGAA. Estimation of the neutron beam characteristics. -Establishment of the technique for the boron concentration analysis. - Estimation of the reliability for the boron analysis. Results of the Project -Installation of the boron concentration analysis facility at Hanaro. - Neutron beam characteristics are the sample position (neutron flux : 7.9 x 10{sup 7} n/cm{sup 2}s, Cd-ratio : 266) Technique for the boron concentration analysis. - Boron detection sensitivity and limit (detection sensitivity : 2, 131 cps/mg-B, detection limit : 67 ng for 10,000 sec). 63 refs., 37 figs., 13 tabs. (Author)

Research on evaluation techniques for immersive multimedia

Science.gov (United States)

Hashim, Aslinda M.; Romli, Fakaruddin Fahmi; Zainal Osman, Zosipha

2013-03-01

Nowadays Immersive Multimedia covers most usage in tremendous ways, such as healthcare/surgery, military, architecture, art, entertainment, education, business, media, sport, rehabilitation/treatment and training areas. Moreover, the significant of Immersive Multimedia to directly meet the end-users, clients and customers needs for a diversity of feature and purpose is the assembly of multiple elements that drive effective Immersive Multimedia system design, so evaluation techniques is crucial for Immersive Multimedia environments. A brief general idea of virtual environment (VE) context and `realism' concept that formulate the Immersive Multimedia environments is then provided. This is followed by a concise summary of the elements of VE assessment technique that is applied in Immersive Multimedia system design, which outlines the classification space for Immersive Multimedia environments evaluation techniques and gives an overview of the types of results reported. A particular focus is placed on the implications of the Immersive Multimedia environments evaluation techniques in relation to the elements of VE assessment technique, which is the primary purpose of producing this research. The paper will then conclude with an extensive overview of the recommendations emanating from the research.

The development of computer industry and applications of its relevant techniques in nuclear research laboratories

International Nuclear Information System (INIS)

Dai Guiliang

1988-01-01

The increasing needs for computers in the area of nuclear science and technology are described. The current status of commerical availabe computer products of different scale in world market are briefly reviewed. A survey of some noticeable techniques is given from the view point of computer applications in nuclear science research laboratories

Developments in operator assistance techniques for nuclear power plant control and operation

International Nuclear Information System (INIS)

Poujol, A.; Papin, B.; Beltranda, G.; Soldermann, R.

1989-01-01

This paper describes an approach which has been developed in order to improve nuclear power plants control and monitoring in normal and abnormal situations. These developments take full advantage of the trend towards the computerization of control rooms in industrial continuous processes. This research program consists in a thorough exploration of different information processing techniques, ranking from the rather simple visual synthetization of informations on graphic displays to sophisticated Artificial Intelligence (AI) techniques. These techniques are put into application for the solving of man-machine interface problems in the different domains of plant operation

Development of a computerized tomographic system based on the FAN-BEAM technique

International Nuclear Information System (INIS)

Junqueira, M.M.; Santos, C.A.C.; Borges, J.C.

1986-01-01

The Nuclear Instrumentation Laboratory, at COPPE/UFRJ, concentrates its researches in the development of computerized tomographic systems, looking for applications in industrial and medical non destructive analysing techniques. In this work we have projected and constructed a tomographic prototype, based on the FAN-BEAM technique for irradiating the object under analysis. An algorithm previously developed to analyse parallel beams, was modified and adapted to the FAN-BEAM geometry. (Author) [pt

Nuclear techniques in the development of advanced ceramic technologies

International Nuclear Information System (INIS)

Axe, J.D.; Hewat, A.W.; Maier, J.; Margaca, F.M.A.; Rauch, H.

1999-01-01

The importance of research, development and application of advanced materials is well understood by all developed and most developing countries. Amongst advanced materials, ceramics play a prominent role due to their specific chemical and physical properties. According to performance and importance, advanced ceramics can be classified as structural ceramics (mechanical function) and the so-called functional ceramics. In the latter class of materials, special electrical, chemical, thermal, magnetic and optical properties are of interest. The most valuable materials are multifunctional, for example, when structural ceramics combine beneficial mechanical properties with thermal and chemical sensitivity. Multifunctionality is characteristic of many composite materials (organic/inorganic composite). Additionally, properties of material can be changed by reducing its dimension (thin films, nanocrystalline ceramics). Nuclear techniques, found important applications in research and development of advanced ceramics. The use of neutron techniques has increased dramatically in recent years due to the development of advanced neutron sources, instrumentation and improved data analysis. Typical neutron techniques are neutron diffraction, neutron radiography, small angle neutron scattering and very small angle neutron scattering. Neutrons can penetrate deeply into most materials thus sampling their bulk properties. In determination of the crystal structure of HTSC, YBa 2 Cu 2 O 7 , XRD located the heavy metal atoms, but failed in finding many of the oxygen atoms, while the neutron diffraction located all atoms equally well in the crystal structure. Neutron diffraction is also unique for the determination of the magnetic structure of materials since the neutrons themselves have a magnetic moment. Application of small angle neutron scattering for the determination of the size of hydrocarbon aggregates within the zeolite channels is illustrated. (author)

Electron-spin-resonance techniques in fuel research

Energy Technology Data Exchange (ETDEWEB)

1965-06-01

E.s.r. techniques provide a sensitive means of identifying the free radicals present in pyrolytic and combustion reactions, and determining their concentration. This article explains the theoretical basis of these techniques and indicates the scope of the work recently initiated with the e.s.r. spectrometer at the Division of Coal Research.

Development of human factors evaluation techniques for nuclear power plants

International Nuclear Information System (INIS)

Oh, I.S.; Lee, Y.H.; Lee, J.W.; Sim, B.S.

1999-01-01

This paper describes development of an operator task simulation analyzer and human factors evaluation techniques performed recently at Korea Atomic Energy Research Institute. The first is the SACOM (Simulation Analyzer with a Cognitive Operator Model) for the assessment of task performance by simulating control room operation. The latter has two objectives: to establish a human factors experiment facility, the Integrated Test Facility (ITF), and to establish techniques for human factors experiments. (author)

Why use case studies rather than simulation-gaming techniques or library research?

Science.gov (United States)

Mcdonald, S. W.

1981-01-01

Method which present a student with a more challenging and true to life situation of needing to conduct research in a problem solving context--and not thinking about organization of format until research and thinking are complete are investigated. Simulation-gaming techniques which attempt to teach initiative and creativity that library research are used for this purpose. However, it is shown case studies provide the greatest opportunities to engage the students in problem solving situations in which they develop skills as researchers and writers.

Development of the dry decontamination technique using plasma

Energy Technology Data Exchange (ETDEWEB)

Kim, Yong Soo; Seo, Yong Dae; Lee, Dong Uk; Jeon, Sang Hwan; Jung, Young Suk [Hanyang University, Seoul (Korea)

2001-04-01

In order to develop an advanced dry decontamination method, dry decontamination technique using gaseous plasma is studied. Scopes of the research are 1) literature survey and case studies of the international R and D activities and industrial application, 2) contaminant characteristics analysis, 3) feasibility and applicability study of the unit techniques, 4) process development study on the plasma decontamination, 5) plasma diagnostics and quantitative analysis by QMS and OES, and 6) design of (microwave) plasma torch system. The major research results are as belows. The maximum etching rate of UO{sub 2} is achieved to be 0.8 {mu}m/min. under 300 deg C, 150 W CF{sub 4}/O{sub 2}/N{sub 2} r.f. plasma maintaining the optimum ratio of CF{sub 4}/O{sub 2} of four, and that of Co and Mo is 0.06 {mu}m/min. and 1.9 {mu}m/min., respectively, under 380 deg C, 220 W CF{sub 4}/O{sub 2} r.f. plasma. The optimum process for the dry decontamination of TRU, CP, and or FP nuclides, therefore, requires the optimum gas composition above 350 deg C and 220W power. It is also demonstrated that this optimum process can be extrapolated to atmospheric high power torch system. In conclusion, if plasma power and temperature increases with maintaining the optimum gas composition, this dry decontamination techniques must be definitely effective and efficient. 17 refs., 62 figs., 4 tabs. (Author)

Application of the partitive analytical forecasting (PAF) technique to the United States controlled thermonuclear research effort

International Nuclear Information System (INIS)

Nichols, S.P.

1975-01-01

The Partitive Analytical Forecasting (PAF) technique is applied to the overall long-term program plans for the Division of Controlled Thermonuclear Research (DCTR) of the United States Energy Research and Development Administration (ERDA). As part of the PAF technique, the Graphical Evaluation and Review Technique (GERTS) IIIZ computer code is used to perform simulations on a logic network describing the DCTR long-term program plan. Logic networks describing the tokamak, mirror, and theta-pinch developments are simulated individually and then together to form an overall DCTR program network. The results of the simulation of the overall network using various funding schemes and strategies are presented. An economic sensitivity analysis is provided for the tokamak logic networks. An analysis is also performed of the fusion-fission hybrid concept in the context of the present DCTR goals. The results mentioned above as well as the PAF technique itself are evaluated, and recommendations for further research are discussed

Development of analytical techniques for safeguards environmental samples at JAEA

International Nuclear Information System (INIS)

Sakurai, Satoshi; Magara, Masaaki; Usuda, Shigekazu; Watanabe, Kazuo; Esaka, Fumitaka; Hirayama, Fumio; Lee, Chi-Gyu; Yasuda, Kenichiro; Inagawa, Jun; Suzuki, Daisuke; Iguchi, Kazunari; Kokubu, Yoko S.; Miyamoto, Yutaka; Ohzu, Akira

2007-01-01

JAEA has been developing, under the auspices of the Ministry of Education, Culture, Sports, Science and Technology of Japan, analytical techniques for ultra-trace amounts of nuclear materials in environmental samples in order to contribute to the strengthened safeguards system. Development of essential techniques for bulk and particle analysis, as well as screening, of the environmental swipe samples has been established as ultra-trace analytical methods of uranium and plutonium. In January 2003, JAEA was qualified, including its quality control system, as a member of the JAEA network analytical laboratories for environmental samples. Since 2004, JAEA has conducted the analysis of domestic and the IAEA samples, through which JAEA's analytical capability has been verified and improved. In parallel, advanced techniques have been developed in order to expand the applicability to the samples of various elemental composition and impurities and to improve analytical accuracy and efficiency. This paper summarizes the trace of the technical development in environmental sample analysis at JAEA, and refers to recent trends of research and development in this field. (author)

The Multitracer technique: manufacturing and application to bio-trace elemental research

International Nuclear Information System (INIS)

Enomoto, Shuichi; Hirunuma, Rieko

2002-01-01

A versatile radioactive multitracer technique has been developed at RIKEN Accelerator Research Facility about 11 years before. It enables efficient and simultaneous tracing of a number of elements under identical experimental conditions. Since 1991, the multitracer technique has been applied for an investigation of a behavior of various elements in chemistry, biochemistry, pharmaceutical sciences, medical sciences, nutritional sciences, agricultural sciences, and environmental sciences. Now, the multitracer has been used in more than 50 laboratories in the world. Its principle and features are presented with examples of recent application. (author)

Advances in Proteomic Techniques for Cytokine Analysis: Focus on Melanoma Research

Directory of Open Access Journals (Sweden)

Helena Kupcova Skalnikova

2017-12-01

Full Text Available Melanoma is a skin cancer with permanently increasing incidence and resistance to therapies in advanced stages. Reports of spontaneous regression and tumour infiltration with T-lymphocytes makes melanoma candidate for immunotherapies. Cytokines are key factors regulating immune response and intercellular communication in tumour microenvironment. Cytokines may be used in therapy of melanoma to modulate immune response. Cytokines also possess diagnostic and prognostic potential and cytokine production may reflect effects of immunotherapies. The purpose of this review is to give an overview of recent advances in proteomic techniques for the detection and quantification of cytokines in melanoma research. Approaches covered span from mass spectrometry to immunoassays for single molecule detection (ELISA, western blot, multiplex assays (chemiluminescent, bead-based (Luminex and planar antibody arrays, ultrasensitive techniques (Singulex, Simoa, immuno-PCR, proximity ligation/extension assay, immunomagnetic reduction assay, to analyses of single cells producing cytokines (ELISpot, flow cytometry, mass cytometry and emerging techniques for single cell secretomics. Although this review is focused mainly on cancer and particularly melanoma, the discussed techniques are in general applicable to broad research field of biology and medicine, including stem cells, development, aging, immunology and intercellular communication.

Important techniques in today's biomedical science research that ...

African Journals Online (AJOL)

olayemitoyin

Keywords: Techniques, Biomedical Science, PhD, Research. ©Physiological Society ..... in mind that to publish a good scientific research paper in a high ..... New. Table 6. Key statistical methods and software utilized in the 33 research articles ...

Improving environmental change research with systematic techniques for qualitative scenarios

International Nuclear Information System (INIS)

Schweizer, Vanessa Jine; Kriegler, Elmar

2012-01-01

Scenarios are key tools in analyses of global environmental change. Often they consist of quantitative and qualitative components, where the qualitative aspects are expressed in narrative, or storyline, form. Fundamental challenges in scenario development and use include identifying a small set of compelling storylines that span a broad range of policy-relevant futures, documenting that the assumptions embodied in the storylines are internally consistent, and ensuring that the selected storylines are sufficiently comprehensive, that is, that descriptions of important kinds of future developments are not left out. The dominant approach to scenario design for environmental change research has been criticized for lacking sufficient means of ensuring that storylines are internally consistent. A consequence of this shortcoming could be an artificial constraint on the range of plausible futures considered. We demonstrate the application of a more systematic technique for the development of storylines called the cross-impact balance (CIB) method. We perform a case study on the scenarios published in the IPCC Special Report on Emissions Scenarios (SRES), which are widely used. CIB analysis scores scenarios in terms of internal consistency. It can also construct a very large number of scenarios consisting of combinations of assumptions about individual scenario elements and rank these combinations in terms of internal consistency. Using this method, we find that the four principal storylines employed in the SRES scenarios vary widely in internal consistency. One type of storyline involving highly carbon-intensive development is underrepresented in the SRES scenario set. We conclude that systematic techniques like CIB analysis hold promise for improving scenario development in global change research. (letter)

A pilot modeling technique for handling-qualities research

Science.gov (United States)

Hess, R. A.

1980-01-01

A brief survey of the more dominant analysis techniques used in closed-loop handling-qualities research is presented. These techniques are shown to rely on so-called classical and modern analytical models of the human pilot which have their foundation in the analysis and design principles of feedback control. The optimal control model of the human pilot is discussed in some detail and a novel approach to the a priori selection of pertinent model parameters is discussed. Frequency domain and tracking performance data from 10 pilot-in-the-loop simulation experiments involving 3 different tasks are used to demonstrate the parameter selection technique. Finally, the utility of this modeling approach in handling-qualities research is discussed.

Further Development of Crack Growth Detection Techniques for US Test and Research Reactors

International Nuclear Information System (INIS)

Kohse, Gordon; Carpenter, David M.; Ostrovsky, Yakov; Joseph Palmer, A.; Teysseyre, Sebastien P.; Davis, Kurt L.; Rempe, Joy L.

2015-01-01

One of the key issues facing Light Water Reactors (LWRs) in extending lifetimes beyond 60 years is characterizing the combined effect of irradiation and water chemistry on material degradation and failure. Irradiation Assisted Stress Corrosion Cracking (IASCC), in which a crack propagates in a susceptible material under stress in an aggressive environment, is a mechanism of particular concern. Full understanding of IASCC depends on real time crack growth data acquired under relevant irradiation conditions. Techniques to measure crack growth in actively loaded samples under irradiation have been developed outside the US - at the Halden Boiling Water Reactor, for example. Several types of IASCC tests have also been deployed at the MITR, including passively loaded crack growth measurements and actively loaded slow strain rate tests. However, there is not currently a facility available in the US to measure crack growth on actively loaded, pre-cracked specimens in LWR irradiation environments. A joint program between the Idaho National Laboratory (INL) and the Massachusetts Institute of Technology (MIT) Nuclear Reactor Laboratory (NRL) is currently underway to develop and demonstrate such a capability for US test and research reactors. Based on the Halden design, the samples will be loaded using miniature high pressure bellows and a compact loading mechanism, with crack length measured in real time using the switched Direct Current Potential Drop (DCPD) method. The basic design and initial mechanical testing of the load system and implementation of the DCPD method have been previously reported. This paper presents the results of initial autoclave testing at INL and the adaptation of the design for use in the high pressure, high temperature water loop at the MITR 6 MW research reactor, where an initial demonstration is planned in mid-2015. Materials considerations for the high pressure bellows are addressed. Design modifications to the loading mechanism required by the

Motion Capture Technique Applied Research in Sports Technique Diagnosis

Directory of Open Access Journals (Sweden)

Zhiwu LIU

2014-09-01

Full Text Available The motion capture technology system definition is described in the paper, and its components are researched, the key parameters are obtained from motion technique, the quantitative analysis are made on technical movements, the method of motion capture technology is proposed in sport technical diagnosis. That motion capture step includes calibration system, to attached landmarks to the tester; to capture trajectory, and to analyze the collected data.

Use of Collage Technique in Modern Art Perceptions of Visual Arts Teacher Candidates: Action Research

Directory of Open Access Journals (Sweden)

Görkem Utku ALPARSLAN

2018-01-01

Full Text Available The purpose of the research is to demonstrate the contribution of the collage technique to modern art perceptions of visual arts teacher candidates. Research has been designed in the form of an action research from qualitative research methods. The study was conducted for eight weeks. The data of the study, the student journals and the pictures of the students before, during and after the application were collected and evaluated by rubric. In the study, it was found that students 'pictures of rubbing their images with rubbing techniques developed as a result of modern formal intellectual and formative reflection and as a result of the descriptive analysis of qualitative data, students' awareness of modern visual intellectual and formal foundations and collage technique increased. As a result of the research, the level of skill of expressing modern formal expression was observed in the students' work and it was determined that the awareness of students about the formal and intellectual structure of modern picture and collage technique increased in the frame of originality, criticism and creativity.

Supply chain management under fuzziness recent developments and techniques

CERN Document Server

Öztayşi, Başar

2014-01-01

Supply Chain Management Under Fuzziness presents recently developed fuzzy models and techniques for supply chain management. These include: fuzzy PROMETHEE, fuzzy AHP, fuzzy ANP, fuzzy VIKOR, fuzzy DEMATEL, fuzzy clustering, fuzzy linear programming, and fuzzy inference systems. The book covers both practical applications and new developments concerning these methods. This book offers an excellent resource for researchers and practitioners in supply chain management and logistics, and will provide them with new suggestions and directions for future research. Moreover, it will support graduate students in their university courses, such as specialized courses on supply chains and logistics, as well as related courses in the fields of industrial engineering, engineering management and business administration.

Current activities in development of PIE techniques in JMTR hot laboratory

International Nuclear Information System (INIS)

Ishii, Toshimitsu; Ohmi, Masao; Shimizu, Michio; Kaji, Yoshiyuki; Ueno, Fumiyoshi

2006-01-01

A wide variety of post-irradiation examinations (PIEs) for research and development of nuclear fuels and materials to be utilized in nuclear field has been carried out since 1971 in three kinds of β-γ hot cells; concrete, lead and steel cells in the JMTR Hot Laboratory (JMTR HL) associated with the Japan Materials Testing Reactor (JMTR). In addition to PIEs, the re-capsuling work including re-instrumentation was also conducted for the power ramping tests of the irradiated LWR fuels using Boiling Water Capsule (BOCA). Recently, new PIE techniques are required for the advanced irradiation studies. In this paper, the irradiation assisted stress corrosion cracking (IASCC) growth test technique of irradiated in-core structural materials and the remote operation technique of the atomic force microscope (AFM) are described as JMTR HL's current activities in the development of new PIE techniques. (author)

Development of breast cancer irradiation technique for BNCT at JRR-4

International Nuclear Information System (INIS)

Nakamura, Takemi; Horiguchi, Hironori; Arai, Masaji; Yanagie, Hironobu

2014-06-01

In the Department of Research Reactor and Tandem Accelerator, developments of irradiation technique with application enlargement for breast cancer on BNCT have been performed in the second medium term plans. We compiled this report about the technological development to solve several problems with the irradiation of breast cancer in the medical irradiation facility of JRR-4. In the present study, design fabrication of a collimator for breast cancer, dose evaluation analysis by clinical model, investigation of dose enhancement at deeper region and investigation of fixing method for breast cancer irradiation were studied. By these evaluation results, we verified that the developed breast cancer irradiation technique can be applied to BNCT medical irradiation of JRR-4. These results are expected to be able to contribute to breast cancer irradiation techniques of other reactor-based BNCT and future accelerator-based BNCT. (author)

Development of Innovative Radioactive Isotope Production Techniques at the Pennsylvania State University Radiation Science and Engineering Center

Energy Technology Data Exchange (ETDEWEB)

Johnsen, Amanda M. [Pennsylvania State Univ., State College, PA (United States). Radiation Science and Engineering Center; Heidrich, Brenden [Pennsylvania State Univ., State College, PA (United States). Radiation Science and Engineering Center; Durrant, Chad [Pennsylvania State Univ., State College, PA (United States). Department of mechanical and Nuclear Engineering Center; Bascom, Andrew [Pennsylvania State Univ., State College, PA (United States). Department of mechanical and Nuclear Engineering Center; Unlu, Kenan [Pennsylvania State Univ., State College, PA (United States). Radiation Science and Engineering Center

2013-08-15

The Penn State Breazeale Nuclear Reactor (PSBR) at the Radiation Science and Engineering Center (RSEC) has produced radioisotopes for research and commercial purposes since 1956. With the rebirth of the radiochemistry education and research program at the RSEC, the Center stands poised to produce a variety of radioisotopes for research and industrial work that is in line with the mission of the DOE Office of Science, Office of Nuclear Physics, Isotope Development and Production Research and Application Program. The RSEC received funding from the Office of Science in 2010 to improve production techniques and develop new capabilities. Under this program, we improved our existing techniques to provide four radioisotopes (Mn-56, Br-82, Na-24, and Ar-41) to researchers and industry in a safe and efficient manner. The RSEC is also working to develop new innovative techniques to provide isotopes in short supply to researchers and others in the scientific community, specifically Cu-64 and Cu-67. Improving our existing radioisotopes production techniques and investigating new and innovative methods are two of the main initiatives of the radiochemistry research program at the RSEC.

COMMUNICATION TECHNIQUE OF HIZBUT TAHRIR INDONESIA (HTI IN THE DEVELOPMENT OF CADRE IN NORTH SUMATERA

Directory of Open Access Journals (Sweden)

Rubino

2017-11-01

Full Text Available This study aimed to analyze the communication techniques applied Hizbut Tahrir Indonesia (HTI in the development of cadres in North Sumatra. The approach used in this research is qualitative approach, with reason to understand the problem in its natural setting, and interpret this phenomenon based on the meaning given by the informant, also because this research is multidimensional which is the result of various situation complexity, so it needs to be analyzed the context around it . The informant of this research is determined by purposive technique that is explored based on the purpose of this research, with informant plan amounted to 6 (six people that is 1 (one management and 5 (five person responsible lajnah. Based on the data obtained, the results of this study are, there are three communication techniques applied by the HTI in cadre development activities are: (1 informative techniques, namely by providing information about HTI and the main ideas it develops, to all levels of society both students , students, scholars, intellectuals, as well as influential figures in society such as government leaders, legislators, leaders of mass organizations, leaders of political parties, etc., as well as members of the cadre at the general level of learning, general level, (2 persuasive techniques by inviting them to join and support HTI preaching through dialogue, discussion, bulletin sharing, magazines, etc., and (3 the technique of human relationships by giving advice inter-personal to the community or members experiencing problems through consultation activities

Fluorescent Probes and Fluorescence (Microscopy Techniques — Illuminating Biological and Biomedical Research

Directory of Open Access Journals (Sweden)

Gregor P. C. Drummen

2012-11-01

Full Text Available Fluorescence, the absorption and re-emission of photons with longer wavelengths, is one of those amazing phenomena of Nature. Its discovery and utilization had, and still has, a major impact on biological and biomedical research, since it enables researchers not just to visualize normal physiological processes with high temporal and spatial resolution, to detect multiple signals concomitantly, to track single molecules in vivo, to replace radioactive assays when possible, but also to shed light on many pathobiological processes underpinning disease states, which would otherwise not be possible. Compounds that exhibit fluorescence are commonly called fluorochromes or fluorophores and one of these fluorescent molecules in particular has significantly enabled life science research to gain new insights in virtually all its sub-disciplines: Green Fluorescent Protein. Because fluorescent proteins are synthesized in vivo, integration of fluorescent detection methods into the biological system via genetic techniques now became feasible. Currently fluorescent proteins are available that virtually span the whole electromagnetic spectrum. Concomitantly, fluorescence imaging techniques were developed, and often progress in one field fueled innovation in the other. Impressively, the properties of fluorescence were utilized to develop new assays and imaging modalities, ranging from energy transfer to image molecular interactions to imaging beyond the diffraction limit with super-resolution microscopy. Here, an overview is provided of recent developments in both fluorescence imaging and fluorochrome engineering, which together constitute the “fluorescence toolbox” in life science research.

A Coordinated Research Project on the Implementation of Nuclear Techniques to Improve Food Traceability

Science.gov (United States)

Frew, Russell; Cannavan, Andrew; Zandric, Zora; Maestroni, Britt; Abrahim, Aiman

2013-04-01

Traceability systems play a key role in assuring a safe and reliable food supply. Analytical techniques harnessing the spatial patterns in distribution of stable isotope and trace element ratios can be used for the determination of the provenance of food. Such techniques offer the potential to enhance global trade by providing an independent means of verifying "paper" traceability systems and can also help to prove authenticity, to combat fraudulent practices, and to control adulteration, which are important issues for economic, religious or cultural reasons. To address some of the challenges that developing countries face in attempting to implement effective food traceability systems, the IAEA, through its Joint FAO/IAEA Division on Nuclear Techniques in Food and Agriculture, has initiated a 5-year coordinated research project involving institutes in 15 developing and developed countries (Austria, Botswana, Chile, China, France, India, Lebanon, Morocco, Portugal, Singapore, Sweden, Thailand, Uganda, UK, USA). The objective is to help in member state laboratories to establish robust analytical techniques and databases, validated to international standards, to determine the provenance of food. Nuclear techniques such as stable isotope and multi-element analysis, along with complementary methods, will be applied for the verification of food traceability systems and claims related to food origin, production, and authenticity. This integrated and multidisciplinary approach to strengthening capacity in food traceability will contribute to the effective implementation of holistic systems for food safety and control. The project focuses mainly on the development of techniques to confirm product authenticity, with several research partners also considering food safety issues. Research topics encompass determination of the geographical origin of a variety of commodities, including seed oils, rice, wine, olive oil, wheat, orange juice, fish, groundnuts, tea, pork, honey and

Developing the EFL Students’ Reading Comprehension By Employing Herringbone Technique

Directory of Open Access Journals (Sweden)

Yunisrina Qismullah Yusuf

2016-11-01

Full Text Available This research aims to find out whether Herringbone Technique can developEFL students’ reading comprehension or not, especially in finding the main idea and supporting details in a recount text. The literature notes that Herringbone is known to be one of the techniques that can helpstudents to find important information and main idea in a text by seeking for answers on six comprehension questions on a diagram, viewed such as a fish’s skeleton. The sample of this research was 30 second grade junior high school students. The researchers employed simple random sampling to choose the sample. It further used the quantitative experimental approach with the pre-experimental design in the form of one group pre-test-post-test design.Pre-test was given before treatments, while post-test was given after the students were taught reading by using the Herringbone Technique. Each pre-test and post-test consisted of ten questions. The statistical formulas were used to analyze the data from the students tests’ scores. The mean score of pre-test was 59 and the post-test was 76. Futhermore, the result of t-test was 10.15, while the critical value of 0.05 significant level was 2.045, with the degree of freedom of 29. Since t-test (10.15 was higher than t-table (2.045, this study concludes that this technique could increase the EFL students’ reading comprehension.Despite in practice the researchers found that this technique decreased the students’ efforts in note-taking, however it did not inhibited them in obtaining improved scores in their reading tests.

Development of food preservation and processing techniques by radiation

Energy Technology Data Exchange (ETDEWEB)

Byun, Myung Woo; Lee, Ju Woon; Kim, Dong Ho [KAERI, Taejon (Korea, Republic of); Yook, Hong Sun [Chungnam National Univ., Taejon (Korea, Republic of); Kim, Hak Soo [Sogang Univ., Seoul (Korea, Republic of); Lee, Cherl Ho; Park, Hyun Jin [Korea Univ., Seoul (Korea, Republic of); Kang, Il Jun [Hallym Univ., Chuncheon (Korea, Republic of); Kwon, Jung Ho [Kyungbook National Univ., Taegu (Korea, Republic of)

2002-05-01

To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following; Processing techniques of low salted and fermented fish using gamma irradiation were developed and superiority of using irradiation to conventional food processing methods was established. Processing technique of value-added functional materials for the manufacture of food or public health products using RT/BT/NT combination technology was developed. The basic theories for the technology development to reduce toxic or undesirable compounds in food such as allergy or carcinogens were established. Exterminating methods of quarantine organisms in herbs/spices was established and the quality evaluation and detection conditions in quarantine treatment were set. From the studies on 'program of public understanding' based on safety of the gamma irradiated food, the information for public relation in enlargement of consumer acceptance/implementation and the peaceful use of nuclear energy were secured. Results from the research project will contribute on improvement of competency of domestic food industry and export market. The results also expect the improvement of public health by prevention of food borne diseases and enhancement of national economy and industry by increase of direct/indirect productivity.

Development of food preservation and processing techniques by radiation

International Nuclear Information System (INIS)

Byun, Myung Woo; Lee, Ju Woon; Kim, Dong Ho; Yook, Hong Sun; Kim, Hak Soo; Lee, Cherl Ho; Park, Hyun Jin; Kang, Il Jun; Kwon, Jung Ho

2002-05-01

To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following; Processing techniques of low salted and fermented fish using gamma irradiation were developed and superiority of using irradiation to conventional food processing methods was established. Processing technique of value-added functional materials for the manufacture of food or public health products using RT/BT/NT combination technology was developed. The basic theories for the technology development to reduce toxic or undesirable compounds in food such as allergy or carcinogens were established. Exterminating methods of quarantine organisms in herbs/spices was established and the quality evaluation and detection conditions in quarantine treatment were set. From the studies on 'program of public understanding' based on safety of the gamma irradiated food, the information for public relation in enlargement of consumer acceptance/implementation and the peaceful use of nuclear energy were secured. Results from the research project will contribute on improvement of competency of domestic food industry and export market. The results also expect the improvement of public health by prevention of food borne diseases and enhancement of national economy and industry by increase of direct/indirect productivity

A review of hydrogeology research techniques and technology

International Nuclear Information System (INIS)

Grisak, G.E.; Pickens, J.F.

1985-06-01

A review of techniques and technology pertaining to the movement of ground water, solutes/radionuclides and heat through porous and fractured media has been conducted. The theory describing each of these processes has been presented in terms of their partial differential equations. The equations serve as the basis for the identification of processes. These parameters have been discussed in detail with regards to their importance in controlling the overall transport processes. A hypothetical research program has been assembled for the purpose of illustrating the hydrogeologic methods and research techniques applicable to site characterization studies. Areas where the current state of the art is lacking have been identified and the necessary research has been recommended. 103 refs

Elements-admixtures of fluorite. Research technique

International Nuclear Information System (INIS)

Fayziev, A.R.

2002-01-01

Present article is devoted to elements-admixtures of fluorite and research techniques used. As a material for researches the mono mineral samples of fluorite of various geologic deposits and ores were used. The determination of sodium and potassium was conducted by means of flame photometry. Strontium, uranium, thorium, lead and rubidium were determined by means of quantitative X-ray spectroscopic analysis. The barium analysis was conducted by means of quantitative method. The manganese analysis was conducted by means of electron paramagnetic resonance.

Research and development of radiation utilization in 1986 at JAERI

International Nuclear Information System (INIS)

1986-01-01

In the peaceful utilization of atomic energy, in addition to the method of utilizing the energy obtained by nuclear fission and nuclear fusion as electric power or heat source, there is the field of utilizing radiation, in which the effect that radiation exerts on substances and the properties of radiation are used for measurement, analysis and others. The fields of utilizing radiation are diverse such as medicine, technology and agriculture, and those directly related to the health and daily life of people are many. Japan Atomic Energy Research Institute has positively advanced the research and development on radiation utilization, which are related to the utilization of irradiation and the production and use of radioisotopes. The former is carried out in Takasaki Radiation Chemistry Research Establishment, and the latter in the Isotope Division, Tokai Research Establishment. Also, the research and development on the radiation-withstanding properties of organic materials and the production techniques for tritium are advanced, and it is expected to begin the highly advanced scientific and technological research using ion beam. The research and development of polymer materials, the techniques of using irradiation, the production and utilization of radioisotopes and others are reported. (Kako, I.)

Methodology for Designing and Developing a New Ultra-Wideband Antenna Based on Bio-Inspired Optimization Techniques

Science.gov (United States)

2017-11-01

on Bio -Inspired Optimization Techniques by Canh Ly, Nghia Tran, and Ozlem Kilic Approved for public release; distribution is...Research Laboratory Methodology for Designing and Developing a New Ultra-Wideband Antenna Based on Bio -Inspired Optimization Techniques by...SUBTITLE Methodology for Designing and Developing a New Ultra-Wideband Antenna Based on Bio -Inspired Optimization Techniques 5a. CONTRACT NUMBER

Analytical research using synchrotron radiation based techniques

International Nuclear Information System (INIS)

Jha, Shambhu Nath

2015-01-01

There are many Synchrotron Radiation (SR) based techniques such as X-ray Absorption Spectroscopy (XAS), X-ray Fluorescence Analysis (XRF), SR-Fourier-transform Infrared (SRFTIR), Hard X-ray Photoelectron Spectroscopy (HAXPS) etc. which are increasingly being employed worldwide in analytical research. With advent of modern synchrotron sources these analytical techniques have been further revitalized and paved ways for new techniques such as microprobe XRF and XAS, FTIR microscopy, Hard X-ray Photoelectron Spectroscopy (HAXPS) etc. The talk will cover mainly two techniques illustrating its capability in analytical research namely XRF and XAS. XRF spectroscopy: XRF spectroscopy is an analytical technique which involves the detection of emitted characteristic X-rays following excitation of the elements within the sample. While electron, particle (protons or alpha particles), or X-ray beams can be employed as the exciting source for this analysis, the use of X-ray beams from a synchrotron source has been instrumental in the advancement of the technique in the area of microprobe XRF imaging and trace level compositional characterisation of any sample. Synchrotron radiation induced X-ray emission spectroscopy, has become competitive with the earlier microprobe and nanoprobe techniques following the advancements in manipulating and detecting these X-rays. There are two important features that contribute to the superb elemental sensitivities of microprobe SR induced XRF: (i) the absence of the continuum (Bremsstrahlung) background radiation that is a feature of spectra obtained from charged particle beams, and (ii) the increased X-ray flux on the sample associated with the use of tunable third generation synchrotron facilities. Detection sensitivities have been reported in the ppb range, with values of 10 -17 g - 10 -14 g (depending on the particular element and matrix). Keeping in mind its demand, a microprobe XRF beamline has been setup by RRCAT at Indus-2 synchrotron

Characterization of ceramics and semiconductors using nuclear techniques. Final report of a co-ordinated research project

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

With the aim of promoting research and facilitating more extensive application of nuclear techniques for material development, the IAEA established in 1994 a Co-ordinated Research Project (CRP) on Characterization of Ceramics and Semiconductors using Nuclear Techniques. This publication reviews and summarizes recent developments in this field and includes an assessment of the current status and trends in nuclear techniques in characterization of inorganic materials of technological importance. The TECDOC presents new achievements on ceramic superconductor behaviour under neutron induced defects, optimization of structure of mineral gels,m low temperature preparation of fine particles of ferrites, crystal luminescence of ceramic composites with improved plastic properties, thin film defects and detoxification of asbestos. The investigation of chemical composition, phase transitions and magnetic properties of ferrites by Moessbauer spectroscopy is largely developed. The document includes 18 individual contributions, each of them has been indexed and provided with an abstract Refs, figs, tabs

Characterization of ceramics and semiconductors using nuclear techniques. Final report of a co-ordinated research project

International Nuclear Information System (INIS)

1999-03-01

With the aim of promoting research and facilitating more extensive application of nuclear techniques for material development, the IAEA established in 1994 a Co-ordinated Research Project (CRP) on Characterization of Ceramics and Semiconductors using Nuclear Techniques. This publication reviews and summarizes recent developments in this field and includes an assessment of the current status and trends in nuclear techniques in characterization of inorganic materials of technological importance. The TECDOC presents new achievements on ceramic superconductor behaviour under neutron induced defects, optimization of structure of mineral gels,m low temperature preparation of fine particles of ferrites, crystal luminescence of ceramic composites with improved plastic properties, thin film defects and detoxification of asbestos. The investigation of chemical composition, phase transitions and magnetic properties of ferrites by Moessbauer spectroscopy is largely developed. The document includes 18 individual contributions, each of them has been indexed and provided with an abstract

Development and applications of the contact electric resistance technique

Energy Technology Data Exchange (ETDEWEB)

Saario, T.

1995-12-31

At the moment both the scientific understanding of corrosion processes and the engineering practices of corrosion control in power plants can benefit considerably from the development of in situ on-line instruments for characterisation of the surface films on construction materials. In this work a new in situ Contact Electric Resistance (CER) technique has been developed for measurement of electric resistance of surface films on metals. The CER technique was applied in this work in several different research areas. These include e.g. localized corrosion of stainless steel in paper mill wet end environment, investigation of the effect of inhibitors in steam generator crevice environments, passivation of GaAs single crystals by sulphate treatment and monitoring of the kinetics of oxide growth on zirconium metals in high temperature water. The CER technique has a measurement capacity ranging from 10-9 {omega} to 105 {omega}. The lowest range of resistance is typical for metallic layers deposited on the surface in electrodeposition processes. The highest range of resistance is found for insulator type of films e.g. on zirconium metals. (author)

FY 1984 annual report on the research and development of automatic sewing systems. Cloth handling techniques; 1984 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. Kiji handling gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1985-03-01

The automatic sewing system technique research association has been commissioned by the Agency of Industrial Science and Technology for (research and development of automatic sewing systems). This program covers R and D of the elementary techniques for total systems and sewing preparation/processing, sewing/assembling, cloth handling, and system management/control. This report describes the results of the R and D efforts for the cloth handling techniques. The program for the cloth handling techniques covers all techniques related to cloth movement, positioning and processing in each sewing step from cloth receiving to completion of sewing. They include the elementary techniques for (1) cloth holding, (2) high-function positioning, and (3) soft cloth transfer. The program for the techniques (1) constructs, on a trial basis, the basic or functional models, and tests and evaluates them. The program for the techniques (2) classifies work shapes, processing types and processing steps, to help select the positioning methods. The program for the techniques (3) investigates necessary conditions for transfer methods and procedures in each step. (NEDO)

FY 1984 annual report on the research and development of automatic sewing systems. Sewing/assembling techniques; 1984 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. Hosei kumitate gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1985-03-01

The automatic sewing system technique research association has been commissioned by the Agency of Industrial Science and Technology for (research and development of automatic sewing systems). This program covers R and D of the elementary techniques for total systems and sewing preparation/processing, sewing/assembling, cloth handling, and system management/control. This report describes the results of the R and D efforts for the sewing/assembling techniques. The sewing/assembling techniques fall into 3 categories, (1) sewing pretreatment techniques, (2) high-function sewing techniques and (3) high-function pressing techniques. The techniques (1) are composed of adhesion processing techniques for the sewing parts processing step, and those for holding the sewing parts, putting them one on another and turning them over. The program for these techniques continues to study the process adaptability, based on the software analysis results, and also involves designs of the test unit and production on a trial basis. The program for the techniques (2) designs, constructs and evaluates the test units for the three-dimensional sewing system, super-sewing unit and multi-functional sewing system. The program for the techniques (3) studies the finishing press, based on the flexible dummy method. (NEDO)

Development status of post irradiation examination techniques at the JMTR Hot Laboratory

International Nuclear Information System (INIS)

Ohmi, M.; Ohsawa, K.; Nakagawa, T.; Umino, A.; Shimizu, M.; Satoh, H.; Oyamada, R.

1992-01-01

Hot laboratory at Oarai Research Establishment was founded to examine the objects mainly irradiated at JMTR (Japan Materials Testing Reactor) and has been operated since 1971. A wide variety of post-irradiation examinations (PIE) is available using the hot laboratory. Continuous efforts are made to develop new PIE techniques to accommodate the user's requirements. The following are main techniques recently developed in the hot laboratory; 1. Remote capsule assembly including remote weld of irradiated objects for reirradiation in JMTR. 2. Fracture toughness tests of reactor component materials. 3. Creep tests of heat resistance alloys in high temperature conditions. 4. Tests of irradiation assisted stress corrosion cracking (IASCC). 5. Examination techniques of miniaturized test specimens. This report describes an outline of the hot laboratory with main emphasis on the new PIE techniques. (author)

Achievements obtained in agricultural research by using nuclear techniques in Turkey

International Nuclear Information System (INIS)

Halitligil, M. B.

2002-01-01

Ankara Nuclear Research Center in Agriculture and Animal Sciences (ANRCAAS) is one of the four unique research centers belonging to Turkish Atomic Energy Authority. ANRCAAS is unique because it is the only center in Turkey which uses nuclear techniques as a tool to solve problems for agriculture or animal sciences which cannot be solved using conventional techniques. Training and Research in the areas of agriculture, animal science, food preservation and sterilization via nuclear techniques are among the objectives of the Center. In this paper, the research activities carried out and the achievements so far obtained in the agricultural specialties of Plant Breeding, Soil Fertility and Plant Nutrition, Plant Protection and Pesticide Residues -all by using nuclear techniques- are provided

Commercializing biomedical research through securitization techniques.

Science.gov (United States)

Fernandez, Jose-Maria; Stein, Roger M; Lo, Andrew W

2012-10-01

Biomedical innovation has become riskier, more expensive and more difficult to finance with traditional sources such as private and public equity. Here we propose a financial structure in which a large number of biomedical programs at various stages of development are funded by a single entity to substantially reduce the portfolio's risk. The portfolio entity can finance its activities by issuing debt, a critical advantage because a much larger pool of capital is available for investment in debt versus equity. By employing financial engineering techniques such as securitization, it can raise even greater amounts of more-patient capital. In a simulation using historical data for new molecular entities in oncology from 1990 to 2011, we find that megafunds of $5–15 billion may yield average investment returns of 8.9–11.4% for equity holders and 5–8% for 'research-backed obligation' holders, which are lower than typical venture-capital hurdle rates but attractive to pension funds, insurance companies and other large institutional investors.

Development of High Speed Imaging and Analysis Techniques Compressible Dynamics Stall

Science.gov (United States)

Chandrasekhara, M. S.; Carr, L. W.; Wilder, M. C.; Davis, Sanford S. (Technical Monitor)

1996-01-01

Dynamic stall has limited the flight envelope of helicopters for many years. The problem has been studied in the laboratory as well as in flight, but most research, even in the laboratory, has been restricted to surface measurement techniques such as pressure transducers or skin friction gauges, except at low speed. From this research, it became apparent that flow visualization tests performed at Mach numbers representing actual flight conditions were needed if the complex physics associated with dynamic stall was to be properly understood. However, visualization of the flow field during compressible conditions required carefully aligned and meticulously reconstructed holographic interferometry. As part of a long-range effort focused on exposing of the physics of compressible dynamic stall, a research wind tunnel was developed at NASA Ames Research Center which permits visual access to the full flow field surrounding an oscillating airfoil during compressible dynamic stall. Initially, a stroboscopic schlieren technique was used for visualization of the stall process, but the primary research tool has been point diffraction interferometry(PDI), a technique carefully optimized for use in th is project. A review of the process of development of PDI will be presented in the full paper. One of the most valuable aspects of PDI is the fact that interferograms are produced in real time on a continuous basis. The use of a rapidly-pulsed laser makes this practical; a discussion of this approach will be presented in the full paper. This rapid pulsing(up to 40,000 pulses/sec) produces interferograms of the rapidly developing dynamic stall field in sufficient resolution(both in space and time) that the fluid physics of the compressible dynamic stall flowfield can be quantitatively determined, including the gradients of pressure in space and time. This permits analysis of the influence of the effect of pitch rate, Mach number, Reynolds number, amplitude of oscillation, and other

Review study of virtual reality techniques used at nuclear issues with emphasis on Brazilian research

International Nuclear Information System (INIS)

Silva, Márcio Henrique da; Legey, Ana Paula; Mól, Antônio Carlos de A.

2016-01-01

Highlights: • A review study of virtual reality techniques used at nuclear issues is presented. • The research was performed to provide a chronological report about this subject. • The results show the development of tools that can lead to more enhanced methods. - Abstract: Some of the procedures referred to nuclear issues like evacuation training, waste management and radioactive dose assessment evaluation are related to dangerous situations where the health of the involved personnel can be compromised. For this reason, several researchers have been proposing the use of virtual reality techniques to help on performing this kind of task. Moreover, there are other applications using this type of tool which allow not only the achievement of better results in comparison to the already available procedures but also provide the development of new technologies. Therefore this work proposes to make a review study concerning to some of the applications of virtual reality techniques and concepts at nuclear issues highlighting some of the works developed in Brazil. To do so, the analyzed researches were organized according to its similarities, objectives and applicability. The goal of this survey is to provide a brief glance concerning to the information about the chronological evolution of this practice describing some of its results besides of showing prospects for further works.

[Research Progress of Vitreous Humor Detection Technique on Estimation of Postmortem Interval].

Science.gov (United States)

Duan, W C; Lan, L M; Guo, Y D; Zha, L; Yan, J; Ding, Y J; Cai, J F

2018-02-01

Estimation of postmortem interval （PMI） plays a crucial role in forensic study and identification work. Because of the unique anatomy location, vitreous humor is considered to be used for estima- ting PMI, which has aroused interest among scholars, and some researches have been carried out. The detection techniques of vitreous humor are constantly developed and improved which have been gradually applied in forensic science, meanwhile, the study of PMI estimation using vitreous humor is updated rapidly. This paper reviews various techniques and instruments applied to vitreous humor detection, such as ion selective electrode, capillary ion analysis, spectroscopy, chromatography, nano-sensing technology, automatic biochemical analyser, flow cytometer, etc., as well as the related research progress on PMI estimation in recent years. In order to provide a research direction for scholars and promote a more accurate and efficient application in PMI estimation by vitreous humor analysis, some inner problems are also analysed in this paper. Copyright© by the Editorial Department of Journal of Forensic Medicine.

Development of pulsation technique for single ion hit system

Energy Technology Data Exchange (ETDEWEB)

Sakai, Takuro; Hamano, Tsuyoshi; Hirao, Toshio; Kamiya, Tomihiro [Japan Atomic Energy Research Inst., Takasaki, Gunma (Japan). Takasaki Radiation Chemistry Research Establishment

1996-12-01

When a high energy heavy ion enters into a substance, high density of ionization and excitement occurrs along its flying trace. Especially, when such an ion enters into a semiconductor cell, a bit inversion called single event is occurred or a phenomenon destroyed element itself on case of the worst is formed. The present semiconductor cell is made in a size of some micron square, as different from its accumulated degree. In order to analyze the single event phenomenon formed by entering ion into such fine region in detail, a technique possible enter heavy ion beam with space resolution under 1 micron to each sample is necessary. In order to develop this technique, a static type high speed beam switch for control of entering a beam into a sample and a single ion detector for detecting entrance of ion into the sample were installed to heavy ion microbeam forming apparatus. The single ion hit system in Takasaki Radiation Chemistry Research Establishment, JAERI succeeded in detection and control technique of the single ion and control of noise due to pulsization and finished development of basic technique of the single ion hit, since now. After today, it is planned to hit actually the single ion onto the sample and evaluate its accuracy. (G.K.)

Development of ion beam sputtering techniques for actinide target preparation

International Nuclear Information System (INIS)

Aaron, W.S.; Zevenbergen, L.A.; Adair, H.L.

1985-01-01

Ion beam sputtering is a routine method for the preparation of thin films used as targets because it allows the use of minimum quantity of starting material, and losses are much lower than most other vacuum deposition techniques. Work is underway in the Isotope Research Materials Laboratory (IRML) at ORNL to develop the techniques that will make the preparation of actinide targets up to 100 μg/cm 2 by ion beam sputtering a routinely available service from IRML. The preparation of the actinide material in a form suitable for sputtering is a key to this technique, as is designing a sputtering system that allows the flexibility required for custom-ordered target production. At present, development work is being conducted on low-activity in a bench-top system. The system will then be installed in a hood or glove box approved for radioactive materials handling where processing of radium, actinium, and plutonium isotopes among others will be performed. (orig.)

Development of ion beam sputtering techniques for actinide target preparation

Science.gov (United States)

Aaron, W. S.; Zevenbergen, L. A.; Adair, H. L.

1985-06-01

Ion beam sputtering is a routine method for the preparation of thin films used as targets because it allows the use of a minimum quantity of starting material, and losses are much lower than most other vacuum deposition techniques. Work is underway in the Isotope Research Materials Laboratory (IRML) at ORNL to develop the techniques that will make the preparation of actinide targets up to 100 μg/cm 2 by ion beam sputtering a routinely available service from IRML. The preparation of the actinide material in a form suitable for sputtering is a key to this technique, as is designing a sputtering system that allows the flexibility required for custom-ordered target production. At present, development work is being conducted on low-activity actinides in a bench-top system. The system will then be installed in a hood or glove box approved for radioactive materials handling where processing of radium, actinium, and plutonium isotopes among others will be performed.

Using of Natural Language Processing Techniques in Suicide Research

Directory of Open Access Journals (Sweden)

Azam Orooji

2017-09-01

Full Text Available It is estimated that each year many people, most of whom are teenagers and young adults die by suicide worldwide. Suicide receives special attention with many countries developing national strategies for prevention. Since, more medical information is available in text, Preventing the growing trend of suicide in communities requires analyzing various textual resources, such as patient records, information on the web or questionnaires. For this purpose, this study systematically reviews recent studies related to the use of natural language processing techniques in the area of people’s health who have completed suicide or are at risk. After electronically searching for the PubMed and ScienceDirect databases and studying articles by two reviewers, 21 articles matched the inclusion criteria. This study revealed that, if a suitable data set is available, natural language processing techniques are well suited for various types of suicide related research.

Projective techniques in consumer research

African Journals Online (AJOL)

privaat

Various projective techniques for personality assess- ment and psychoanalytic treatment in clinical psychol- .... Some social conventions or barriers may constrain the expression of feelings and reporting of behav- .... ject-stipulated characteristic. Brand mapping may be used in new product development and as a way to.

Development of food preservation and processing techniques by radiation

Energy Technology Data Exchange (ETDEWEB)

Byun, Myung Woo; Lee, Ju Woon; Kim, Dong Ho [KAERI, Taejon (Korea, Republic of); Yook, Hong Sun [Chungnam National Univ., Taejon (Korea, Republic of); Kim, Hak Soo [Sogang Univ., Seoul (Korea, Republic of); Lee, Cherl Ho; Park, Hyun Jin [Korea Univ., Seoul (Korea, Republic of); Kang, Il Jun [Hallym Univ., Chuncheon (Korea, Republic of); Kwon, Jung Ho [Kyungbook National Univ., Taegu (Korea, Republic of)

2002-05-01

To secure national food resources, development of energy-saving food processing and preservation technologies, establishment of method on improvement of national health and safety by development of alternative techniques of chemicals and foundation of the production of hygienic food and public health related products by irradiation technology were studied. Results at current stage are following; Processing techniques of low salted and fermented fish using gamma irradiation were developed and superiority of using irradiation to conventional food processing methods was established. Processing technique of value-added functional materials for the manufacture of food or public health products using RT/BT/NT combination technology was developed. The basic theories for the technology development to reduce toxic or undesirable compounds in food such as allergy or carcinogens were established. Exterminating methods of quarantine organisms in herbs/spices was established and the quality evaluation and detection conditions in quarantine treatment were set. From the studies on 'program of public understanding' based on safety of the gamma irradiated food, the information for public relation in enlargement of consumer acceptance/implementation and the peaceful use of nuclear energy were secured. Results from the research project will contribute on improvement of competency of domestic food industry and export market. The results also expect the improvement of public health by prevention of food borne diseases and enhancement of national economy and industry by increase of direct/indirect productivity.

Recent developments in blood cell labeling research

Energy Technology Data Exchange (ETDEWEB)

Srivastava, S.C.; Straub, R.F.; Meinken, G.E.

1988-09-07

A number of recent developments in research on blood cell labeling techniques are presented. The discussion relates to three specific areas: (1) a new in vitro method for red blood cell labeling with /sup 99m/Tc; (2) a method for labeling leukocytes and platelets with /sup 99m/Tc; and (3) the use of monoclonal antibody technique for platelet labeling. The advantages and the pitfalls of these techniques are examined in the light of available mechanistic information. Problems that remain to be resolved are reviewed. An assessment is made of the progress as well as prospects in blood cell labeling methodology including that using the monoclonal antibody approach. 37 refs., 4 figs.

Recent developments in blood cell labeling research

International Nuclear Information System (INIS)

Srivastava, S.C.; Straub, R.F.; Meinken, G.E.

1988-01-01

A number of recent developments in research on blood cell labeling techniques are presented. The discussion relates to three specific areas: (1) a new in vitro method for red blood cell labeling with /sup 99m/Tc; (2) a method for labeling leukocytes and platelets with /sup 99m/Tc; and (3) the use of monoclonal antibody technique for platelet labeling. The advantages and the pitfalls of these techniques are examined in the light of available mechanistic information. Problems that remain to be resolved are reviewed. An assessment is made of the progress as well as prospects in blood cell labeling methodology including that using the monoclonal antibody approach. 37 refs., 4 figs

A brief fatigue inventory of shoulder health developed by quality function deployment technique.

Science.gov (United States)

Liu, Shuo-Fang; Lee, Yannlong; Huang, Yiting

2009-01-01

The purpose of this study was to develop a diagnostic outcome instrument that has high reliability and low cost. The scale, called the Shoulder Fatigue Scale-30 Items (SFS-30) risk assessment, was used to determine the severity of patient neck and shoulder discomfort. The quality function deployment (QFD) technique was used in designing and developing a simple medical diagnostic scale with high degree of accuracy. Research data can be used to divide the common causes of neck and shoulder discomfort into 6 core categories: occupation, cumulative, psychologic, diseases, diet, and sleep quality. The SFS-30 was validated by using a group of individuals who had been previously diagnosed with different levels of neck and shoulder symptoms. The SFS-30 assessment determined that 78.57% of the participants experienced a neck and shoulder discomfort level above the SFS-30 risk curve and required immediate medical attention. The QFD technique can improve the accuracy and reliability of an assessment outcome instrument. This is mainly because the QFD technique is effective in prioritizing and assigning weight to the items in the scale. This research successfully developed a reliable risk assessment scale to diagnose neck and shoulder symptoms using QFD technique. This scale was proven to have high accuracy and closely represents reality.

Modern machine learning techniques and their applications in cartoon animation research

CERN Document Server

Yu, Jun

2013-01-01

The integration of machine learning techniques and cartoon animation research is fast becoming a hot topic. This book helps readers learn the latest machine learning techniques, including patch alignment framework; spectral clustering, graph cuts, and convex relaxation; ensemble manifold learning; multiple kernel learning; multiview subspace learning; and multiview distance metric learning. It then presents the applications of these modern machine learning techniques in cartoon animation research. With these techniques, users can efficiently utilize the cartoon materials to generate animations

Application of metabonomic analytical techniques in the modernization and toxicology research of traditional Chinese medicine.

Science.gov (United States)

Lao, Yong-Min; Jiang, Jian-Guo; Yan, Lu

2009-08-01

In the recent years, a wide range of metabonomic analytical techniques are widely used in the modern research of traditional Chinese medicine (TCM). At the same time, the international community has attached increasing importance to TCM toxicity problems. Thus, many studies have been implemented to investigate the toxicity mechanisms of TCM. Among these studies, many metabonomic-based methods have been implemented to facilitate TCM toxicity investigation. At present, the most prevailing methods for TCM toxicity research are mainly single analysis techniques using only one analytical means. These techniques include nuclear magnetic resonance (NMR), gas chromatography-mass spectrometry (GC-MS), and liquid chromatography-mass spectrometry (LC-MS), etc.; with these techniques, some favourable outcomes have been gained in the toxic reaction studies of TCM, such as the action target organs assay, the establishment of action pattern, the elucidation of action mechanism and the exploration of action material foundation. However, every analytical technique has its advantages and drawbacks, no existing analytical technique can be versatile. Multi-analysed techniques can partially overcome the shortcomings of single-analysed techniques. Combination of GC-MS and LC-MS metabolic profiling approaches has unravelled the pathological outcomes of aristolochic acid-induced nephrotoxicity, which can not be achieved by single-analysed techniques. It is believed that with the further development of metabonomic analytical techniques, especially multi-analysed techniques, metabonomics will greatly promote TCM toxicity research and be beneficial to the modernization of TCM in terms of extending the application of modern means in the TCM safety assessment, assisting the formulation of TCM safety norms and establishing the international standards indicators.

Handbook of Qualitative Research Techniques and Analysis in Entrepreneurship

DEFF Research Database (Denmark)

One of the most challenging tasks in the research design process is choosing the most appropriate data collection and analysis techniques. This Handbook provides a detailed introduction to five qualitative data collection and analysis techniques pertinent to exploring entreprneurial phenomena....

Development of hotcell non-destructive examination techniques

Energy Technology Data Exchange (ETDEWEB)

Kim, Young Uhn; Yu, S. C.; Kang, B. S.; Byun, K. S. [Chungbuk National University, Chungju (Korea)

2002-01-01

The purpose of this project is to establish non-destructive examination techniques which needs to determine the status of spent nuclear fuel and/or bundles. Through the project, we will establish an image reconstruction tomography which is a kind of non-destructive techniques in Hotcell. The tomography technique can be used to identify the 2-dimensional density distribution of fission products in the spent fuel rods and/or bundles. And form results of the measurement and analysis of magnetic properties of neutron irradiated material in the press vessel and reactor, we will develop some techniques to test its hardness and defects. In 2001, the first year, we have established mathematical background and necessary data and informations to develop the techniques. We will try to find some experimental results that are necessary in developing the Hotcell non-destructive examination techniques in the coming year. 14 refs., 65 figs., 5 tabs. (Author)

Research and development on the human factors technologies for nuclear power plants in Korea

International Nuclear Information System (INIS)

Sim, B.S.; Lee, J.W.; Cheon, S.W.

1996-01-01

This paper introduces our research project on the development of human factors technologies for nuclear power plants in Korea. The project is divided into two sub-projects. The first sub-project is the development of human factors experimental evaluation techniques, which aims to develop the techniques for experimental design, experimental measurement and data collection/analysis, and to construct an integrated test facility (ITF) suitable for the experimental evaluation of man-machine interfaces (MMIs) at an advanced control room. The second is the development of human behavior analysis techniques, which has two research areas: one is the development of a task simulation analyzer and the other is human error case studies for nuclear power plants. (author)

Development of mechanoluminescence technique for impact studies

International Nuclear Information System (INIS)

Chandra, B.P.

2011-01-01

A new technique called, mechanoluminescence technique, is developed for measuring the parameters of impact. This technique is based on the phenomenon of mechanoluminescence (ML), in which light emission takes place during any mechanical action on solids. When a small solid ball makes an impact on the mechanoluminescent thin film coated on a solid, then initially the elastico ML (EML) intensity increases with time, attains a maximum value I m at a particular time t m , and later on it decreases with time. The contact time T c of ball, can be determined from the relation T c =2t c , where t c is the time at which the EML emission due to compression of the sample becomes negligible. The area from where the EML emission occurs can be taken as the contact area A c . The maximum compression h is given by h=A c /(πr), where r is the radius of the impacting ball, and thus, h can be determined from the known values of A c and r. The maximum force at contact is given by F m =(2mU 0 )/T c , where m is the mass of the impacting ball and U 0 is the velocity of the ball at impact. The maximum impact stress σ m can be obtained from the relation, σ m =F m /A c =(2mU 0 )/(T c A c ). Thus, ML provides a real-time technique for determining the impact parameters such as T c , A c , h, F m and σ m . Using the ML technique, the impact parameters of the SrAl 2 O 4 :Eu film and ZnS:Mn coating are determined. The ML technique can be used to determine the impact parameters in the elastic region and plastic region as well as fracture. ML can also be used to determine the impact parameters for the collision between solid and liquid, if the mechanoluminescent material is coated on the surface of the solid. The measurement of fracto ML in microsecond and nanosecond range may provide a tool for studying the fragmentations in solids by the impact. Using the fast camera the contact area and the depth of compression can be determined for different intervals of time. - Research highlights: → A

Ethnomathematical research and drama in education techniques: developing a dialogue in a geometry class of 10th grade students

OpenAIRE

Stathopoulou, Charoula; Kotarinou, Panagiota; Appelbaum, Peter

2015-01-01

Ethnomathematical research, together with digital technologies (WebQuest) and Drama-in- Education (DiE) techniques, can create a fruitful learning environment in a mathematics classroom—a hybrid/third space—enabling increased student participation and higher levels of cognitive engagement. This article examines how ethnomathematical ideas processed within the experiential environment established by the Drama-in-Education techniques challenged students‘ conceptions of the nature of mathematics...

A carbon monoxide passive sampler: Research and development needs

Energy Technology Data Exchange (ETDEWEB)

Traynor, G.W.; Apte, M.G.; Diamond, R.C.; Woods, A.L.

1991-11-01

In rare instances, carbon monoxide (CO) levels in houses can reach dangerously high concentrations, causing adverse health effects ranging from mild headaches to, under extreme conditions, death. Hundreds of fatal accidental carbon monoxide poisonings occur each year primarily due to the indoor operation of motor vehicles, the indoor use of charcoal for cooking, the operation of malfunctioning vented and unvented combustion appliances, and the misuse combustion appliances. Because there is a lack of simple, inexpensive, and accurate field sampling instrumentation, it is difficult for gas utilities and researchers to conduct field research studies designed to quantify the concentrations of CO in residences. Determining the concentration of CO in residences is the first step towards identifying the high risk appliances and high-CO environments which pose health risks. Thus, there exists an urgent need to develop and field-validate a CO-quantifying technique suitable for affordable field research. A CO passive sampler, if developed, could fulfill these requirements. Existing CO monitoring techniques are discussed as well as three potential CO-detection methods for use in a CO passive sampler. Laboratory and field research needed for the development and validation of an effective and cost-efficient CO passive sampler are also discussed.

The role of basic research in the development of new processes

International Nuclear Information System (INIS)

Juentgen, H.; Heek, K.H. van; Klein, J.; Knoblauch, K.

1981-01-01

In many cases fundamental research is the starting point for the development of technical processes. This development will reach the aims successfully, if during the different phases - laboratory, semitechnical-plant, pilot plant, demonstration - results obtained from fundamental research can be used continuously. Also problems arising during the performance of the projects have to be solved by fundamental research. This interaction is discussed taking as examples the process development in the field of activated carbon application in energy- and environmental protection techniques and a modern coal gasification process development with nuclear process heat. (orig.) [de

Development of Reservoir Characterization Techniques and Production Models for Exploiting Naturally Fractured Reservoirs

Energy Technology Data Exchange (ETDEWEB)

Wiggins, Michael L.; Brown, Raymon L.; Civan, Frauk; Hughes, Richard G.

2001-08-15

Research continues on characterizing and modeling the behavior of naturally fractured reservoir systems. Work has progressed on developing techniques for estimating fracture properties from seismic and well log data, developing naturally fractured wellbore models, and developing a model to characterize the transfer of fluid from the matrix to the fracture system for use in the naturally fractured reservoir simulator.

Research Progress on Pesticide Residue Analysis Techniques in Agro-products

Directory of Open Access Journals (Sweden)

HE Ze-ying

2016-07-01

Full Text Available There are constant occurrences of acute pesticide poisoning among consumers and pesticide residue violations in agro-products import/export trading. Pesticide residue analysis is the important way to protect the food safety and the interest of import/export enterprises. There has been a rapid development in pesticide residue analysis techniques in recent years. In this review, the research progress in the past five years were discussed in the respects of samples preparation and instrument determination. The application, modification and development of the QuEChERS method in samples preparation and the application of tandem mass spectrometry and high resolution mass spectrometry were reviewed. And the implications for the future of the field were discussed.

Research on geochemical exploration in geotherm development

International Nuclear Information System (INIS)

Hirowatari, Kazuo; Imaizumi, Yukio; Koga, Akito; Iwanaga, Tatsuto.

1987-01-01

The decisive factor of geotherm development is to improve the exploration techniques. By effectively carrying out the selection of promising development spots and the decision of well drilling positions, the geotherm development exceeding existing energy sources becomes feasible. There have been many problems in conventional geotherm exploration such as the high cost and long work period, therefore, it was decided to advance the research on geochemical exploration techniques which are relatively simple and can be carried out with low cost. When the techniques of geochemistry are used, for example, in the case that there are hot springs or fumaroles, the temperature, origin, properties and so on of underground hot water reservoirs can be estimated from their chemical composition. The method of examining the mercury concentration in soil and soil air has been in practical use in the geothermal districts where the ground surface symptom lacks. This time, the method of investigation using radon, thoron and gamma ray as the exploration indices was newly studied. The index compositions for geochemical exploration, new exploration index compositions, the method of measurement, the basic investigation and on-the-spot investigation are reported. (Kako, I.)

DEVELOPMENT OF WIRELESS TECHNIQUES IN DATA AND POWER TRANSMISSION APPLICATION FOR PARTICLE-PHYSICS DETECTORS

CERN Document Server

Brenner, R; Dehos, C; De Lurgio, P; Djurcic, Z; Drake, G; Gonzales Gimenez, JL; Gustafsson, L; Kim, DW; Locci, E; Pfeiffer, U; Röhrich, D; Rydberg, D; Schöning, A; Siligaris, A; Soltveit, HK; Ullaland, K; Vincent, P; Vasquez, PR; Wiedner, D; Yang, S

2017-01-01

In the WADAPT project described in this Letter of Intent, we propose to develop wireless techniques for data and power transmission in particle-physics detectors. Wireless techniques have developed extremely fast over the last decade and are now mature for being considered as a promising alternative to cables and optical links that would revolutionize the detector design. The WADAPT consortium has been formed to identify the specific needs of different projects that might benefit from wireless techniques with the objective of providing a common platform for research and development in order to optimize effectiveness and cost. The proposed R&D will aim at designing and testing wireless demonstrators for large instrumentation systems.

Status and development of nuclear techniques for commercial application in Sichuan

Energy Technology Data Exchange (ETDEWEB)

Chen Hao; Pan Pingchuan; Chen Zhuping; Zhu Yun; Chao Xiaochuan [Sichuan Province Institute of Nuclear Technology Application, Chengdu, Sichuan (China)

2001-03-01

This article presents information on fields of radiation techniques in Sichuan and their potential development in future. Sichuan is one of biggest provinces and is a center of economy and art in the southwest of China. Research of nuclear technology began from 1960. The studies at the beginning had focused on agriculture, radiation chemistry industry and radiation medicine. Over the past 30 years, nuclear techniques are used in a wide range of applications, from food preservation to crosslinking. They play an increasingly valuable and often unique role in Sichuan economy. (J.P.N.)

Status and development of nuclear techniques for commercial application in Sichuan

International Nuclear Information System (INIS)

Chen Hao; Pan Pingchuan; Chen Zhuping; Zhu Yun; Chao Xiaochuan

2001-01-01

This article presents information on fields of radiation techniques in Sichuan and their potential development in future. Sichuan is one of biggest provinces and is a center of economy and art in the southwest of China. Research of nuclear technology began from 1960. The studies at the beginning had focused on agriculture, radiation chemistry industry and radiation medicine. Over the past 30 years, nuclear techniques are used in a wide range of applications, from food preservation to crosslinking. They play an increasingly valuable and often unique role in Sichuan economy. (J.P.N.)

Research on integrated simulation of fluid-structure system by computation science techniques

International Nuclear Information System (INIS)

Yamaguchi, Akira

1996-01-01

In Power Reactor and Nuclear Fuel Development Corporation, the research on the integrated simulation of fluid-structure system by computation science techniques has been carried out, and by its achievement, the verification of plant systems which has depended on large scale experiments is substituted by computation science techniques, in this way, it has been aimed at to reduce development costs and to attain the optimization of FBR systems. For the purpose, it is necessary to establish the technology for integrally and accurately analyzing complicated phenomena (simulation technology), the technology for applying it to large scale problems (speed increasing technology), and the technology for assuring the reliability of the results of analysis when simulation technology is utilized for the permission and approval of FBRs (verifying technology). The simulation of fluid-structure interaction, the heat flow simulation in the space with complicated form and the related technologies are explained. As the utilization of computation science techniques, the elucidation of phenomena by numerical experiment and the numerical simulation as the substitute for tests are discussed. (K.I.)

Applied research and development of neutron activation analysis

Energy Technology Data Exchange (ETDEWEB)

Chung, Yong Sam; Moon, Jong Hwa; Kim, Sun Ha; Bak, Sung Ryel; Park, Yong Chul; Kim, Young Ki; Chung, Hwan Sung; Park, Kwang Won; Kang, Sang Hun

2000-05-01

This report is written for results of research and development as follows : improvement of neutron irradiation facilities, counting system and development of automation system and capsules for NAA in HANARO ; improvement of analytical procedures and establishment of analytical quality control and assurance system; applied research and development of environment, industry and human health and its standardization. For identification and standardization of analytical method, environmental biological samples and polymer are analyzed and uncertainity of measurement are estimated. Also data intercomparison and proficency test were performed. Using airborne particulate matter chosen as a environmental indicators, trace elemental concentrations of sample collected at urban and rural site are determined and then the calculation of statistics and the factor analysis are carried out for investigation of emission source. International cooperation research project was carried out for utilization of nuclear techniques.

Applied research and development of neutron activation analysis

International Nuclear Information System (INIS)

Chung, Yong Sam; Moon, Jong Hwa; Kim, Sun Ha; Bak, Sung Ryel; Park, Yong Chul; Kim, Young Ki; Chung, Hwan Sung; Park, Kwang Won; Kang, Sang Hun

2000-05-01

This report is written for results of research and development as follows : improvement of neutron irradiation facilities, counting system and development of automation system and capsules for NAA in HANARO ; improvement of analytical procedures and establishment of analytical quality control and assurance system; applied research and development of environment, industry and human health and its standardization. For identification and standardization of analytical method, environmental biological samples and polymer are analyzed and uncertainity of measurement are estimated. Also data intercomparison and proficency test were performed. Using airborne particulate matter chosen as a environmental indicators, trace elemental concentrations of sample collected at urban and rural site are determined and then the calculation of statistics and the factor analysis are carried out for investigation of emission source. International cooperation research project was carried out for utilization of nuclear techniques

DEVELOPMENT OF RESERVOIR CHARACTERIZATION TECHNIQUES AND PRODUCTION MODELS FOR EXPLOITING NATURALLY FRACTURED RESERVOIRS

Energy Technology Data Exchange (ETDEWEB)

Michael L. Wiggins; Raymon L. Brown; Faruk Civan; Richard G. Hughes

2002-12-31

For many years, geoscientists and engineers have undertaken research to characterize naturally fractured reservoirs. Geoscientists have focused on understanding the process of fracturing and the subsequent measurement and description of fracture characteristics. Engineers have concentrated on the fluid flow behavior in the fracture-porous media system and the development of models to predict the hydrocarbon production from these complex systems. This research attempts to integrate these two complementary views to develop a quantitative reservoir characterization methodology and flow performance model for naturally fractured reservoirs. The research has focused on estimating naturally fractured reservoir properties from seismic data, predicting fracture characteristics from well logs, and developing a naturally fractured reservoir simulator. It is important to develop techniques that can be applied to estimate the important parameters in predicting the performance of naturally fractured reservoirs. This project proposes a method to relate seismic properties to the elastic compliance and permeability of the reservoir based upon a sugar cube model. In addition, methods are presented to use conventional well logs to estimate localized fracture information for reservoir characterization purposes. The ability to estimate fracture information from conventional well logs is very important in older wells where data are often limited. Finally, a desktop naturally fractured reservoir simulator has been developed for the purpose of predicting the performance of these complex reservoirs. The simulator incorporates vertical and horizontal wellbore models, methods to handle matrix to fracture fluid transfer, and fracture permeability tensors. This research project has developed methods to characterize and study the performance of naturally fractured reservoirs that integrate geoscience and engineering data. This is an important step in developing exploitation strategies for

Development, relevance, and applications of 'atom-at-a-time' techniques

International Nuclear Information System (INIS)

Hoffman, D.C.

2012-01-01

A brief history of the development and some of the first uses of 'atom-at-a-time' techniques to investigate the chemical and nuclear properties of the actinide and transactinide elements are presented. The currently known transactinides (all elements with Z > 103) were discovered using physical (nuclear) techniques rather than chemical separation techniques because of their short half-lives and low production rates and the difficulty in accurately predicting chemical properties of the heaviest elements because of relativistic effects. Some of the constraints on systems suitable for such studies and whether these tracer-scale results can be extended to the macro-scale are discussed. The relevance and importance of the methods and their potential for application to some current problems such as nuclear forensics and proliferation and environmental concerns are considered. The value of graduate research utilizing such techniques in helping to attract and educate the next generation of nuclear scientists is highlighted. (author)

Laboratory training manual on the use of nuclear techniques in insect research and control. 3. ed.

International Nuclear Information System (INIS)

1992-01-01

Isotopes are commonly used in agricultural research in developed countries, but because of a lack of both training and equipment isotopic techniques are not frequently used in developing countries. This manual has been prepared with the aim of helping entomologists and others responsible for the control of insects in developing countries become familiar with the potential uses of isotopes and radiation in solving some of their research and insect control problems. After chapters dealing with radiation safety, the general properties of radiation and isotopes (especially those used by entomologists), and radiation detection and assay of radioactivity, two further chapters discuss applications to entomological problems and the sterile insect technique. Numerous case studies are described, and the final chapter also includes a description of eight laboratory exercises to investigate the effects of gamma irradiation and chemosterilants on insects. Refs, figs and tabs

Ion backscattering techniques applied in materials science research

International Nuclear Information System (INIS)

Sood, D.K.

1978-01-01

The applications of Ion Backscattering Technique (IBT) to material analysis have expanded rapidly during the last decade. It is now regarded as an analysis tool indispensable for a versatile materials research program. The technique consists of simply shooting a beam of monoenergetic ions (usually 4 He + ions at about 2 MeV) onto a target, and measuring their energy distribution after backscattering at a fixed angle. Simple Rutherford scattering analysis of the backscattered ion spectrum yields information on the mass, the absolute amount and the depth profile of elements present upto a few microns of the target surface. The technique is nondestructive, quick, quantitative and the only known method of analysis which gives quantitative results without recourse to calibration standards. Its major limitations are the inability to separate elements of similar mass and a complete absence of chemical-binding information. A typical experimental set up and spectrum analysis have been described. Examples, some of them based on the work at the Bhabha Atomic Research Centre, Bombay, have been given to illustrate the applications of this technique to semiconductor technology, thin film materials science and nuclear energy materials. Limitations of IBT have been illustrated and a few remedies to partly overcome these limitations are presented. (auth.)

Reference materials for microanalytical nuclear techniques. Final report of a co-ordinated research project 1994-1999

International Nuclear Information System (INIS)

2002-06-01

A significant problem in the use of solid- and small-sample techniques is a general lack in suitable certified reference materials (CRM). Essentially, no CRM are certified for the small sample sizes typically used. Direct utilization of most existing CRM in solid sampling analysis procedures, typically 1 mg sample size, is often difficult or even impossible because trace components may not be sufficiently homogeneously distributed in the sample or their homogeneous distribution has not been tested. To explore the production, characterization and use of CRM for determinations with sample sizes much smaller than currently used, the Coordinated Research Program focused on selection of biological and environmental materials suitable for microanalytical techniques, definition of specifications for suitable CRM, evaluation of existing CRM for use with microanalytical techniques, evaluation of requirements for sample pre-treatment, evaluation of analytical techniques and research on development of techniques to be used in characterizing the homogeneity and chemical composition of small samples, and application of analytical techniques to the characterization of candidate reference materials for use with microanalytical techniques

Power quality research techniques: advantages and disadvantages

International Nuclear Information System (INIS)

Gil Montoya, Francisco; Manzano Agugliaro, Francisco; Gomez Lopez, Julio; Sanchez Alguacil, Pedro

2012-01-01

Nowadays, power quality (PQ) plays a very important role in power systems. So that is why it is very important to use suitable tools allowing a precise detection of anomalies and perturbations in power systems. Given traditional analysis techniques, such as Fourier Transform, today new tools are being developed based on domain transformation, such as Wavelet Transform (WT) or S-Transform (ST), along with Artificial Intelligence (AI) techniques such as Fuzzy Logic (FL) or Artificial Neural Networks (ANN). In this paper, new algorithm and mathematic techniques are reviewed and discussed, and also compared with traditional techniques, revealing the precision and superiority achieved with these new techniques. ST and WT is detailed, basically, as a tool with great scope and future in power quality analysis because of its precision, noise immunity and its contribution with quality information about PQ.

Research and development in radiological protection

International Nuclear Information System (INIS)

Butragueno, J. L.; Villota, C.; Gutierrez, C.; Rodriguez, A.

2004-01-01

The objective of Radiological Protection is to guarantee that neither people, be they workers or members of the public, or the environment are exposed to radiological risks considered by society to be unacceptable. Among the various resources available to meet this objective is Research and Development (R and D), which is carried out in three areas: I. Radiological protection of persons: (a) knowledge of the biological effects of radiations, in order to determine the relationship that exists between radiation exposure dose and its effects on health; (b) the development of new personal dosimetry techniques in order to adapt to new situations, instrumental techniques and information management technologies allowing for better assessment of exposure dose; and (c) development of the principle of radiological protection optimisation (ALARA), which has been set up internationally as the fundamental principle on which radiological protection interventions are based. II. Assessment of environmental radiological impact, the objective of which is to assess the nature and magnitude of situations of exposure to ionising radiations as a result of the controlled or uncontrolled release of radioactive material to the environment, and III.Reduction of the radiological impact of radioactive wastes, the objective of which is to develop radioactive material and waste management techniques suitable for each situation, in order to reduce the risks associated with their definitive management or their release to the environment. Briefly described below are the strategic lines of R and D of the CSN, the Electricity Industry, Ciemat and Enresa in the aforementioned areas. (Author)

Photonics Research and Development

Energy Technology Data Exchange (ETDEWEB)

Dickson, Elizabeth [UNLV Research Foundation, Las Vegas, NV (United States)

2010-01-15

energy efficiency and lower costs for display and lighting applications (UNLV College of Engineering); (2) advancing green LED technology based on the Indium-Gallium-Nitride system (BU), thus improving conversion efficiencies; (3) employing unique state-of-the-art X-ray, electron and optical spectroscopies with microscopic techniques to learn more about the electronic structure of materials and contacts in LED devices (UNLV College of Science); (4) establishing a UNLV Display Lighting Laboratory staffed with a specialized team of academic researchers, students and industrial partners focused on identifying and implementing engineering solutions for lighting display-related problems; and (5) conducting research, development and demonstration for HSL essential to the resolution of technological barriers to commercialization.

[Example of product development by industry and research solidarity].

Science.gov (United States)

Seki, Masayoshi

2014-01-01

When the industrial firms develop the product, the research result from research institutions is used or to reflect the ideas from users on the developed product would be significant in order to improve the product. To state the software product which developed jointly as an example to describe the adopted development technique and its result, and to consider the modality of the industry solidarity seen from the company side and joint development. The software development methods have the merit and demerit and necessary to choose the optimal development technique by the system which develops. We have been jointly developed the dose distribution browsing software. As the software development method, we adopted the prototype model. In order to display the dose distribution information, it is necessary to load four objects which are CT-Image, Structure Set, RT-Plan, and RT-Dose, are displayed in a composite manner. The prototype model which is the development technique was adopted by this joint development was optimal especially to develop the dose distribution browsing software. In a prototype model, since the detail design was created based on the program source code after the program was finally completed, there was merit on the period shortening of document written and consist in design and implementation. This software eventually opened to the public as an open source. Based on this developed prototype software, the release version of the dose distribution browsing software was developed. Developing this type of novelty software, it normally takes two to three years, but since the joint development was adopted, it shortens the development period to one year. Shortening the development period was able to hold down to the minimum development cost for a company and thus, this will be reflected to the product price. The specialists make requests on the product from user's point of view are important, but increase in specialists as professionals for product

Development of Radiotracer Techniques in Industry

International Nuclear Information System (INIS)

Wardono

2000-01-01

Contribution of radiotracer techniques to solve problems in industrial process plants have been recognized since a long time. Radiotracer application was governed by three main components, namely radioisotopes, radiation detection and data interpretation of an experiment. The three main components mentioned above have been continually developed to overcome problems relating to the operation of industrial process plants. The availability of isotope generator is one of the development aspect in radiotracer technique. Radiation hazard in radiotracer experiment may be reduced by applying isotope generator and on the other hand the delivery of radiotracer to the plant site from the radioisotopes producer was made easier. The development of microprocessor in computer system has facilitated data recording, storing and retrieving. Development in mathematical model supported by radiotracer experiment enhance data interpretation and shed light on various phenomena of flow process. Generally a flow dynamic in a process plant in all kind of industries can be studied using radiotracer technique. However the main challenge coming from petroleum, petrochemical and mineral processing industries

Radio Astronomers Develop New Technique for Studying Dark Energy

Science.gov (United States)

2010-07-01

Pioneering observations with the National Science Foundation's giant Robert C. Byrd Green Bank Telescope (GBT) have given astronomers a new tool for mapping large cosmic structures. The new tool promises to provide valuable clues about the nature of the mysterious "dark energy" believed to constitute nearly three-fourths of the mass and energy of the Universe. Dark energy is the label scientists have given to what is causing the Universe to expand at an accelerating rate. While the acceleration was discovered in 1998, its cause remains unknown. Physicists have advanced competing theories to explain the acceleration, and believe the best way to test those theories is to precisely measure large-scale cosmic structures. Sound waves in the matter-energy soup of the extremely early Universe are thought to have left detectable imprints on the large-scale distribution of galaxies in the Universe. The researchers developed a way to measure such imprints by observing the radio emission of hydrogen gas. Their technique, called intensity mapping, when applied to greater areas of the Universe, could reveal how such large-scale structure has changed over the last few billion years, giving insight into which theory of dark energy is the most accurate. "Our project mapped hydrogen gas to greater cosmic distances than ever before, and shows that the techniques we developed can be used to map huge volumes of the Universe in three dimensions and to test the competing theories of dark energy," said Tzu-Ching Chang, of the Academia Sinica in Taiwan and the University of Toronto. To get their results, the researchers used the GBT to study a region of sky that previously had been surveyed in detail in visible light by the Keck II telescope in Hawaii. This optical survey used spectroscopy to map the locations of thousands of galaxies in three dimensions. With the GBT, instead of looking for hydrogen gas in these individual, distant galaxies -- a daunting challenge beyond the technical

Research on digital multi-channel pulse height analysis techniques

International Nuclear Information System (INIS)

Xiao Wuyun; Wei Yixiang; Ai Xianyun; Ao Qi

2005-01-01

Multi-channel pulse height analysis techniques are developing in the direction of digitalization. Based on digital signal processing techniques, digital multi-channel analyzers are characterized by powerful pulse processing ability, high throughput, improved stability and flexibility. This paper analyzes key techniques of digital nuclear pulse processing. With MATLAB software, main algorithms are simulated, such as trapezoidal shaping, digital baseline estimation, digital pole-zero/zero-pole compensation, poles and zeros identification. The preliminary general scheme of digital MCA is discussed, as well as some other important techniques about its engineering design. All these lay the foundation of developing homemade digital nuclear spectrometers. (authors)

FY 1983 annual report on the research and development of automatic sewing systems. Cloth handling techniques; 1983 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. Kiji handling gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1984-03-01

The automatic sewing system technique research association has been commissioned by the Agency of Industrial Science and Technology for (research and development of automatic sewing systems). This program covers R and D of the elementary techniques for total systems and sewing preparation/processing, sewing/assembling, cloth handling, and system management/control. This report describes the results of the R and D efforts for the cloth handling techniques. The program for the cloth holding techniques classifies the elementary works from cloth picking-up to completion of sewing, classifies the holding methods, and analyzes the holding functions, to establish the design guidelines for the holding device functions. The basic designs of a total of 9 holding modules and the holding module with a built-in sensor are drawn, evaluated and investigated. The program for the highly functional positioning techniques analyzes the current sewing/pressing works, and analyzes and systemizes the related elementary works, to establish the design guidelines for the light module handler functions. The program for the soft cloth transfer techniques analyzes the works and investigates the transfer-related factors for delivery of cloth within the process, to establish the design guidelines for the hardware configuration. (NEDO)

FY 1983 annual report on the research and development of automatic sewing systems. Sewing/assembling techniques; 1983 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. Hosei kumitate gujutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1984-03-01

The automatic sewing system technique research association has been commissioned by the Agency of Industrial Science and Technology for (research and development of automatic sewing systems). This program covers R and D of the elementary techniques for total systems and sewing preparation/processing, sewing/assembling, cloth handling, and system management/control. This report describes the results of the R and D efforts for the sewing/assembling techniques. The FY 1983 efforts are directed to the basic designs of (1) sewing pretreatment techniques, (2) high-function sewing techniques and (3) high-function pressing techniques, and some of the related devices are made on a trial basis. The program for the theme (1) studies the process adaptability, based on the software analysis results, and preliminary tests, overall concept and basic designs for the hardware. The program for the theme (2) finds out possibility of super-sewing unit in combination of sewing and adhesion of single thread rings and automatic bobbin thread supply. The multi-functional sewing system is studied, with the object to introduce an FMS into the part sewing step. The program for the theme (3) concentrates the R and D efforts on finishing pressing step. (NEDO)

Research in decommissioning techniques for nuclear fuel cycle facilities in JNC. 7. JWTF decommissioning techniques

International Nuclear Information System (INIS)

Ogawa, Ryuichiro; Ishijima, Noboru

1999-02-01

Decommissioning techniques such as radiation measuring and monitoring, decontamination, dismantling and remote handling in the world were surveyed to upgrading technical know-how database for decommissioning of Joyo Waste Treatment Facility (JWTF). As the result, five literatures for measuring and monitoring techniques, 14 for decontamination and 22 for dismantling feasible for JWTF decommissioning were obtained and were summarized in tables. On the basis of the research, practical applicability of those techniques to decommissioning of JWTF was evaluated. This report contains brief surveyed summaries related to JWTF decommissioning. (H. Itami)

Canadian safeguards research and development in support of the IAEA

International Nuclear Information System (INIS)

1980-03-01

Canada has established a safeguards research and development program whose purpose is to supplement the resources of the IAEA. The program of support is a coordinated effort for the development and application of safeguards techniques and instruments to reactors of Canadian design. This document sets forth those tasks that make up the program

Development for advanced materials and testing techniques

Energy Technology Data Exchange (ETDEWEB)

Hishinuma, Akimichi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

1998-03-01

Recent studies using a JMTR and research reactors of JRR-2 and JRR-3 are briefly summarized. Small specimen testing techniques (SSTT) required for an effective use of irradiation volume and also irradiated specimens have been developed focussing on tensile test, fatigue test, Charpy test and small punch test. By using the small specimens of 0.1 - several mm in size, similar values of tensile and fatigue properties to those by standard size specimens can be taken, although the ductile-brittle transition temperature (DBTT) depends strongly on Charpy specimen size. As for advanced material development, R and D about low activation ferritic steels have been done to investigate irradiation response. The low activation ferritic steel, so-called F82H jointly-developed by JAERI and NKK for fusion, has been confirmed to have good irradiation resistance within a limited dose and now selected as a standard material in the fusion material community. It is also found that TiAi intermetallic compounds, which never been considered for nuclear application in the past, have an excellent irradiation resistance under an irradiation condition. Such knowledge can bring about a large expectation for developing advanced nuclear materials. (author)

Third molar development: evaluation of nine tooth development registration techniques for age estimations.

Science.gov (United States)

Thevissen, Patrick W; Fieuws, Steffen; Willems, Guy

2013-03-01

Multiple third molar development registration techniques exist. Therefore the aim of this study was to detect which third molar development registration technique was most promising to use as a tool for subadult age estimation. On a collection of 1199 panoramic radiographs the development of all present third molars was registered following nine different registration techniques [Gleiser, Hunt (GH); Haavikko (HV); Demirjian (DM); Raungpaka (RA); Gustafson, Koch (GK); Harris, Nortje (HN); Kullman (KU); Moorrees (MO); Cameriere (CA)]. Regression models with age as response and the third molar registration as predictor were developed for each registration technique separately. The MO technique disclosed highest R(2) (F 51%, M 45%) and lowest root mean squared error (F 3.42 years; M 3.67 years) values, but differences with other techniques were small in magnitude. The amount of stages utilized in the explored staging techniques slightly influenced the age predictions. © 2013 American Academy of Forensic Sciences.

Developments in functional neuroimaging techniques

International Nuclear Information System (INIS)

Aine, C.J.

1995-01-01

A recent review of neuroimaging techniques indicates that new developments have primarily occurred in the area of data acquisition hardware/software technology. For example, new pulse sequences on standard clinical imagers and high-powered, rapidly oscillating magnetic field gradients used in echo planar imaging (EPI) have advanced MRI into the functional imaging arena. Significant developments in tomograph design have also been achieved for monitoring the distribution of positron-emitting radioactive tracers in the body (PET). Detector sizes, which pose a limit on spatial resolution, have become smaller (e.g., 3--5 mm wide) and a new emphasis on volumetric imaging has emerged which affords greater sensitivity for determining locations of positron annihilations and permits smaller doses to be utilized. Electromagnetic techniques have also witnessed growth in the ability to acquire data from the whole head simultaneously. EEG techniques have increased their electrode coverage (e.g., 128 channels rather than 16 or 32) and new whole-head systems are now in use for MEG. But the real challenge now is in the design and implementation of more sophisticated analyses to effectively handle the tremendous amount of physiological/anatomical data that can be acquired. Furthermore, such analyses will be necessary for integrating data across techniques in order to provide a truly comprehensive understanding of the functional organization of the human brain

[Research progress on the technique and materials for three-dimensional bio-printing].

Science.gov (United States)

Yang, Runhuai; Chen, Yueming; Ma, Changwang; Wang, Huiqin; Wang, Shuyue

2017-04-01

Three-dimensional (3D) bio-printing is a novel engineering technique by which the cells and support materials can be manufactured to a complex 3D structure. Compared with other 3D printing methods, 3D bio-printing should pay more attention to the biocompatible environment of the printing methods and the materials. Aimed at studying the feature of the 3D bio-printing, this paper mainly focuses on the current research state of 3D bio-printing, with the techniques and materials of the bio-printing especially emphasized. To introduce current printing methods, the inkjet method, extrusion method, stereolithography skill and laser-assisted technique are described. The printing precision, process, requirements and influence of all the techniques on cell status are compared. For introduction of the printing materials, the cross-link, biocompatibility and applications of common bio-printing materials are reviewed and compared. Most of the 3D bio-printing studies are being remained at the experimental stage up to now, so the review of 3D bio-printing could improve this technique for practical use, and it could also contribute to the further development of 3D bio-printing.

Development of Plant Application Technique of Low Dose Radiation

Energy Technology Data Exchange (ETDEWEB)

Chung, Byung Yeoup; Kim, Jae Sung; Lim, Yong Taek (and others)

2007-07-15

The project was carried out to achieve three aims. First, development of application techniques of cell-stimulating effects by low-dose radiation. Following irradiation with gamma-rays of low doses, beneficial effects in crop germination, early growth, and yield were investigated using various plant species and experimental approaches. For the actual field application, corroborative studies were also carried out with a few concerned experimental stations and farmers. Moreover, we attempted to establish a new technique of cell cultivation for industrial mass-production of shikonin, a medicinal compound from Lithospermum erythrorhizon and thereby suggested new application fields for application techniques of low-dose radiation. Second, elucidation of action mechanisms of ionizing radiation in plants. By investigating changes in plant photosynthesis and physiological metabolism, we attempted to elucidate physiological activity-stimulating effects of low-dose radiation and to search for radiation-adaptive cellular components. Besides, analyses of biochemical and molecular biological mechanisms for stimulus-stimulating effects of low-dose radiation were accomplished by examining genes and proteins inducible by low-dose radiation. Third, development of functional crop plants using radiation-resistant factors. Changes in stress-tolerance of plants against environmental stress factors such as light, temperature, salinity and UV-B stress after exposed to low-dose gamma-rays were investigated. Concerned reactive oxygen species, antioxidative enzymes, and antioxidants were also analyzed to develop high value-added and environment-friendly functional plants using radiation-resistant factors. These researches are important to elucidate biological activities increased by low-dose radiation and help to provide leading technologies for improvement of domestic productivity in agriculture and development of high value-added genetic resources.

Development of Plant Application Technique of Low Dose Radiation

International Nuclear Information System (INIS)

Chung, Byung Yeoup; Kim, Jae Sung; Lim, Yong Taek

2007-07-01

The project was carried out to achieve three aims. First, development of application techniques of cell-stimulating effects by low-dose radiation. Following irradiation with gamma-rays of low doses, beneficial effects in crop germination, early growth, and yield were investigated using various plant species and experimental approaches. For the actual field application, corroborative studies were also carried out with a few concerned experimental stations and farmers. Moreover, we attempted to establish a new technique of cell cultivation for industrial mass-production of shikonin, a medicinal compound from Lithospermum erythrorhizon and thereby suggested new application fields for application techniques of low-dose radiation. Second, elucidation of action mechanisms of ionizing radiation in plants. By investigating changes in plant photosynthesis and physiological metabolism, we attempted to elucidate physiological activity-stimulating effects of low-dose radiation and to search for radiation-adaptive cellular components. Besides, analyses of biochemical and molecular biological mechanisms for stimulus-stimulating effects of low-dose radiation were accomplished by examining genes and proteins inducible by low-dose radiation. Third, development of functional crop plants using radiation-resistant factors. Changes in stress-tolerance of plants against environmental stress factors such as light, temperature, salinity and UV-B stress after exposed to low-dose gamma-rays were investigated. Concerned reactive oxygen species, antioxidative enzymes, and antioxidants were also analyzed to develop high value-added and environment-friendly functional plants using radiation-resistant factors. These researches are important to elucidate biological activities increased by low-dose radiation and help to provide leading technologies for improvement of domestic productivity in agriculture and development of high value-added genetic resources

Development of Wireless Techniques in Data and Power Transmission - Application for Particle Physics Detectors

CERN Document Server

Locci, E.; Dehos, C.; De Lurgio, P.; Djurcic, Z.; Drake, G.; Gimenez, J. L. Gonzalez; Gustafsson, L.; Kim, D.W.; Roehrich, D.; Schoening, A.; Siligaris, A.; Soltveit, H.K.; Ullaland, K.; Vincent, P.; Wiednert, D.; Yang, S.; Brenner, R.

2015-01-01

Wireless techniques have developed extremely fast over the last decade and using them for data and power transmission in particle physics detectors is not science- fiction any more. During the last years several research groups have independently thought of making it a reality. Wireless techniques became a mature field for research and new developments might have impact on future particle physics experiments. The Instrumentation Frontier was set up as a part of the SnowMass 2013 Community Summer Study [1] to examine the instrumentation R&D for the particle physics research over the coming decades: {\\guillemotleft} To succeed we need to make technical and scientific innovation a priority in the field {\\guillemotright}. Wireless data transmission was identified as one of the innovations that could revolutionize the transmission of data out of the detector. Power delivery was another challenge mentioned in the same report. We propose a collaboration to identify the specific needs of different projects that m...

The applicability of Lean and Six Sigma techniques to clinical and translational research.

Science.gov (United States)

Schweikhart, Sharon A; Dembe, Allard E

2009-10-01

Lean and Six Sigma are business management strategies commonly used in production industries to improve process efficiency and quality. During the past decade, these process improvement techniques increasingly have been applied outside the manufacturing sector, for example, in health care and in software development. This article concerns the potential use of Lean and Six Sigma in improving the processes involved in clinical and translational research. Improving quality, avoiding delays and errors, and speeding up the time to implementation of biomedical discoveries are prime objectives of the National Institutes of Health (NIH) Roadmap for Medical Research and the NIH's Clinical and Translational Science Award program. This article presents a description of the main principles, practices, and methods used in Lean and Six Sigma. Available literature involving applications of Lean and Six Sigma to health care, laboratory science, and clinical and translational research is reviewed. Specific issues concerning the use of these techniques in different phases of translational research are identified. Examples of Lean and Six Sigma applications that are being planned at a current Clinical and Translational Science Award site are provided, which could potentially be replicated elsewhere. We describe how different process improvement approaches are best adapted for particular translational research phases. Lean and Six Sigma process improvement methods are well suited to help achieve NIH's goal of making clinical and translational research more efficient and cost-effective, enhancing the quality of the research, and facilitating the successful adoption of biomedical research findings into practice.

The development of human factors experimental evaluation techniques -The development of human factors technologies-

International Nuclear Information System (INIS)

Sim, Bong Shick; Oh, In Seok; Cha, Kyeong Ho; Lee, Hyun Chul

1994-04-01

In the 2nd year of the research project for the development of human factors evaluation techniques, we first defined the experimental target systems by the comparison study of the advanced control rooms proposed by foreign countries in order to make the experiment feasible and realistic for the 10 experimental items selected in the first year of the project. Then we have decided to confine our research on the big board overview panel and operator workstations. Following the development of selection criteria for our research interest, we have identified the design variables which may influence the performance of the operator by the functional analysis. The experimental variables which will be used for the evaluation of the proposed items are then defined by the relational analysis between evaluation items and design variables and they are classified by the characteristics of the measurement data. The functional requirements of ITF are developed to accommodate the necessary functions for carrying out the 10 evaluation items. The functional requirements for each sub-system of ITF have been developed with the experimental paradigm of APTEA. Finally we have reviewed the compact nuclear simulator (CNS) at KAERI from the point of view of jyman factors guidelines/principles and proposed the two possible layouts for the experimental apparatus for the evaluation of display alternative and operational procedure. (Author)

Use of isotope techniques in water resources inventory planning and development

International Nuclear Information System (INIS)

1979-01-01

The seminar, sponsored jointly by the IAEA, UNESCO, and WHO, was organized by the Isotope Hydrology Section for hydrologists and hydrogeologists from English-speaking African countries who have primary administrative and technical responsibility in planning, implementing, and supervising programmes in the field of water resources in their countries. The aim of the seminar was to discuss and to inform the participants of both the theoretical and applied aspects of isotope techniques in hydrology and their potential use in studies dealing with water resources inventory, planning, and development. A similar regional seminar was organized in 1973 by the IAEA in Mexico City for Latin- American countries. In 1979, such a seminar will be held for French-speaking African countries. The Nairobi seminar was held at the East African Institute for Meteorological Training and Research. It was opened by the Minister for Water Development of the Kenyan Government, Dr. Gikonyo Kiano, who stressed the importance of water development problems in the African region and who appreciated the IAEA/UNESCO/WHO initiative in holding the seminar on isotope techniques in water resources in Nairobi. The programme of seminar lectures and discussions included the following topics. 1 Basic principles of radioisotope techniques and stable isotope ratios in hydrology 2. Tritium and radiocarbon as environmental tracers for dating water bodies 3 Isotope techniques in studying the origin of groundwater, recharge, and flow of groundwater. 4. Isotope techniques for identification of surface and groundwater relationships. 5 Surface water studies including lake dynamics, discharge measurements and sediment transport 6. Isotope methods in aquifer characteristics. 7 Isotope methods in geothermal resources prospecting. 8. Isotope techniques in hydraulics engineering. Each topic was illustrated with detailed descriptions of case studies During discussions, participants presented important problems (of water

Development of Large Sample Neutron Activation Technique for New Applications in Thailand

International Nuclear Information System (INIS)

Laoharojanaphand, S.; Tippayakul, C.; Wonglee, S.; Channuie, J.

2018-01-01

The development of the Large Sample Neutron Activation Analysis (LSNAA) in Thailand is presented in this paper. The technique had been firstly developed with rice sample as the test subject. The Thai Research Reactor-1/Modification 1 (TRR-1/M1) was used as the neutron source. The first step was to select and characterize an appropriate irradiation facility for the research. An out-core irradiation facility (A4 position) was first attempted. The results performed with the A4 facility were then used as guides for the subsequent experiments with the thermal column facility. The characterization of the thermal column was performed with Cu-wire to determine spatial distribution without and with rice sample. The flux depression without rice sample was observed to be less than 30% while the flux depression with rice sample increased to within 60%. The flux monitors internal to the rice sample were used to determine average flux over the rice sample. The gamma selfshielding effect during gamma measurement was corrected using the Monte Carlo simulation. The ratio between the efficiencies of the volume source and the point source for each energy point was calculated by the MCNPX code. The research team adopted the k0-NAA methodology to calculate the element concentration in the research. The k0-NAA program which developed by IAEA was set up to simulate the conditions of the irradiation and measurement facilities used in this research. The element concentrations in the bulk rice sample were then calculated taking into account the flux depression and gamma efficiency corrections. At the moment, the results still show large discrepancies with the reference values. However, more research on the validation will be performed to identify sources of errors. Moreover, this LS-NAA technique was introduced for the activation analysis of the IAEA archaeological mock-up. The results are provided in this report. (author)

Determining plutonium mass in spent fuel with non-destructive assay techniques - NGSU research overview and update on 6 NDA techniques

Energy Technology Data Exchange (ETDEWEB)

Tobin, Stephen J [Los Alamos National Laboratory; Conlin, Jeremy L [Los Alamos National Laboratory; Evans, Louise G [Los Alamos National Laboratory; Hu, Jianwei [Los Alamos National Laboratory; Blanc, Pauline C [Los Alamos National Laboratory; Lafleur, Adrienne M [Los Alamos National Laboratory; Menlove, Howard O [Los Alamos National Laboratory; Schear, Melissa A [Los Alamos National Laboratory; Swinhoe, Martyn T [Los Alamos National Laboratory; Croft, Stephen [Los Alamos National Laboratory; Fensin, Michael L [Los Alamos National Laboratory; Freeman, Corey R [Los Alamos National Laboratory; Koehler, William E [Los Alamos National Laboratory; Mozin, V [Los Alamos National Laboratory; Sandoval, N P [Los Alamos National Laboratory; Lee, T H [KAERI; Cambell, L W [PNNL; Cheatham, J R [ORNL; Gesh, C J [PNNL; Hunt, A [IDAHO STATE UNIV; Ludewigt, B A [LBNL; Smith, L E [PNNL; Sterbentz, J [INL

2010-09-15

This poster is one of two complementary posters. The Next Generation Safeguards Initiative (NGSI) of the U.S. DOE has initiated a multi-lab/university collaboration to quantify the plutonium (Pu) mass in, and detect the diversion of pins from, spent nuclear fuel assemblies with non-destructive assay (NDA). This research effort has the goal of quantifying the capability of 14 NDA techniques as well as training a future generation of safeguards practitioners. By November of 2010, we will be 1.5 years into the first phase (2.5 years) of work. This first phase involves primarily Monte Carlo modelling while the second phase (also 2.5 years) will focus on experimental work. The goal of phase one is to quantify the detection capability of the various techniques for the benefit of safeguard technology developers, regulators, and policy makers as well as to determine what integrated techniques merit experimental work, We are considering a wide range of possible technologies since our research horizon is longer term than the focus of most regulator bodies. The capability of all of the NDA techniques will be determined for a library of 64 17 x 17 PWR assemblies [burnups (15, 30, 45, 60 GWd/tU), initial enrichments (2, 3, 4, 5%) and cooling times (1, 5, 20, 80 years)]. The burnup and cooling time were simulated with each fuel pin being comprised of four radial regions. In this paper an overview of the purpose will be given as well as a technical update on the following 6 neutron techniques: {sup 252}Cf Interrogation with Prompt Neutron Detection, Delayed Neutrons, Differential Die-Away, Differential Die-Away Self-Interrogation, Passive Neutron Albedo Reactivity, Self-Integration Neutron Resonance Densitometry. The technical update will quantify the anticipated performance of each technique for the 64 assemblies of the spent fuel library.

Determining plutonium mass in spent fuel with non-destructive assay techniques - NGSI research overview and update on 6 NDA techniques

International Nuclear Information System (INIS)

Tobin, Stephen J.; Conlin, Jeremy L.; Evans, Louise G.; Hu, Kianwei; Blanc, P.C.; Lafleur, Am; Menlove, H.O.; Schear, M.A.; Swinhoe, M.T.; Croft, S.; Fensin, M.L.; Freeman, C.R.; Koehler, W.E.; Mozin, V.; Sandoval, N.P.; Lee, T.H.; Cambell, L.W.; Cheatham, J.R.; Gesh, C.J.; Hunt, A.; Ludewigt, B.A.; Smith, L.E.; Sterbentz, J.

2010-01-01

This poster is one of two complementary posters. The Next Generation Safeguards Initiative (NGSI) of the U.S. DOE has initiated a multi-lab/university collaboration to quantify the plutonium (Pu) mass in, and detect the diversion of pins from, spent nuclear fuel assemblies with non-destructive assay (NDA). This research effort has the goal of quantifying the capability of 14 NDA techniques as well as training a future generation of safeguards practitioners. By November of 2010, we will be 1.5 years into the first phase (2.5 years) of work. This first phase involves primarily Monte Carlo modelling while the second phase (also 2.5 years) will focus on experimental work. The goal of phase one is to quantify the detection capability of the various techniques for the benefit of safeguard technology developers, regulators, and policy makers as well as to determine what integrated techniques merit experimental work, We are considering a wide range of possible technologies since our research horizon is longer term than the focus of most regulator bodies. The capability of all of the NDA techniques will be determined for a library of 64 17 x 17 PWR assemblies (burnups (15, 30, 45, 60 GWd/tU), initial enrichments (2, 3, 4, 5%) and cooling times (1, 5, 20, 80 years)). The burnup and cooling time were simulated with each fuel pin being comprised of four radial regions. In this paper an overview of the purpose will be given as well as a technical update on the following 6 neutron techniques: 252 Cf Interrogation with Prompt Neutron Detection, Delayed Neutrons, Differential Die-Away, Differential Die-Away Self-Interrogation, Passive Neutron Albedo Reactivity, Self-Integration Neutron Resonance Densitometry. The technical update will quantify the anticipated performance of each technique for the 64 assemblies of the spent fuel library.

Design and Development of Emittance Measurement Device by Using the Pepper-pot Technique

Science.gov (United States)

Pakluea, S.; Rimjaem, S.

2017-09-01

Transverse emittance of a charged particle beam is one of the most important properties that reveals the quality of the beam. It is related to charge density, transvers size and angular displacement of the beam in transverse phase space. There are several techniques to measure the transverse emittance value. One of practical methods is the pepper-pot technique, which can measure both horizontal and vertical emittance value in a single measurement. This research concentrates on development of a pepper-pot device to measure the transverse emittance of electron beam produced from an accelerator injector system, which consists of a thermionic cathode RF electron gun and an alpha magnet, at the Plasma and Beam Physics Research Facility, Chiang Mai University. Simulation of beam dynamics was conducted with programs PARMELA, ELEGANT and self-developed codes using C and MATLAB. The geometry, dimensions and location of the pepper-pot as well as its corresponding screen station position were included in the simulation. The result from this study will be used to design and develop a practical pepper-pot experimental station.

Thin layer activation techniques in research and industry

International Nuclear Information System (INIS)

Conlon, T.W.

1993-01-01

The following key application of thin layer activation technique (TLA) are discussed: ion-erosion in fusion tokamaks, bio-engineering technology, automobile industry. Future developments of the techniques, such as fission fragment TLA, multi-layer TLA and recoil implantation are discussed as well. 7 refs, 6 figs, 1 tab

Annual plan of research on safety techniques against low level radioactive wastes, 1984-1988

International Nuclear Information System (INIS)

1984-01-01

The establishment of the countermeasures for treating and disposing radioactive wastes has become an important subject for promoting the utilization of atomic energy. Especially as to low level radioactive wastes, the cumulative quantity has reached about 460,000 in terms of 200 l drums as of the end of March, 1983, and accompanying the development of the utilization of atomic energy, its rapid increase is expected. So far, as for the disposal of low level radioactive wastes, the research and development and the preparation of safety criteria and safety evaluation techniques have been carried out, following the basic policy of the Atomic Energy Commission to execute land disposal and ocean disposal in combination, first to make the test disposal after preliminary safety evaluation, and to shift to the full scale disposal based on the results. The annual plan was decided on July 22, 1983, and the first revision was carried out this time, therefore, it is reported here. The basic policy of establishing this annual plan, and the annual plan for safety technique research are described. (Kako, I.)

Fostering applications of neutron scattering techniques in developing countries: IAEA's role

Energy Technology Data Exchange (ETDEWEB)

Paranjpe, Shriniwas K. [Division of Physical and Chemical Sciences, International Atomic Energy Agency, Wagramer Strasse 5, A-1400 Vienna (Austria)]. E-mail: S.K.Paranjpe@iaea.org; Mank, G. [Division of Physical and Chemical Sciences, International Atomic Energy Agency, Wagramer Strasse 5, A-1400 Vienna (Austria); Ramamoorthy, N. [Division of Physical and Chemical Sciences, International Atomic Energy Agency, Wagramer Strasse 5, A-1400 Vienna (Austria)

2006-11-15

Over the last 60 years research reactors have played an important role in technological and socio-economical development of mankind. Neutron scattering has been the workhorse for research and development in materials science. Developing countries with moderate flux research reactors have also been involved in using this technique. The reactors and the facilities around them have a large potential for applications, while their under-utilization has been a concern for many member states. The International Atomic Energy Agency (IAEA) has been supporting its member states in the enhancement of utilization of their research reactors. Technical meetings focussing on the area of current interests with potential applications are organized under the project on 'effective utilization of research reactors,' e.g. on residual stress measurement, neutron reflectometry. Coordinated research projects (CRPs) bring together scientists from developed and developing countries, build collaborations, and exchange expertise and technology. The CRPs on research reactor utilization include topics like development of small-angle neutron scattering applications and development of sources and imaging systems for neutron radiography. New CRPs on the measurement of residual stress and accelerator-driven neutron sources will be initiated soon. The results from these meetings of CRPs are published as technical documents of the IAEA that would act as guidelines for capacity building for research reactor managers. This paper will present some of the salient features of IAEA activities in promoting research reactor utilization.

Development of an eddy current inspection technique for sleeved engine disk bolt holes

International Nuclear Information System (INIS)

Palanisamy, R.; Lakin, K.M.

1983-01-01

Recent research programs have concentrated mainly on developing techniques to characterize surface breaking cracks and very little has been done towards characterizing subsurface flaws in conducting materials. Presented in this paper are the results of some initial theoretical work aimed at the development of a reliable eddy current technique to detect and characterize defects in engine disk bolt holes under a 0.05'' stainless steel sleeve. The change in impedance of an absolute eddy current coil with and without ferrite core, and the distribution of eddy currents around a second layer crack with and without a thin insulating film between the two conducting layers have been predicted numerically. The overall system development goals and methods to accomplish them are outlined briefly

Scientific Research, Technological Development and Innovation as Parts of Sustainable Development

OpenAIRE

Angela Timuş; Laura Afteni; Stela Rînja

2007-01-01

This article is an integrate part of individual scientific project „Studies regarding improvement of investigation methodologies, techniques and proceedings in economic science”, and it was made in accordance with conditions which were stipulated in the contract for financing Nr.28/ind from 26.01.07. Scientific research and technological development are the main activities which create and generate economic and social progress in the modern world. In our days the science on the whole become a...

Development Model of Basic Technique Skills Training Shot-Put Obrien Style Based Biomechanics Review

Directory of Open Access Journals (Sweden)

danang rohmat hidayanto

2018-03-01

Full Text Available The background of this research is the unavailability of learning model of basic technique technique of O'Brien style force that integrated in skill program based on biomechanics study which is used as a reference to build the basic technique skill of the O'Brien style force among students. The purpose of this study is to develop a model of basic-style technique of rejecting the O'Brien-style shot put based on biomechanical studies for beginner levels, including basic prefix technique, glide, final stage, repulsion, further motion and repulsion performance of O'Brien style, all of which arranged in a medium that is easily accessible whenever, by anyone and anywhere, especially in SMK Negeri 1 Kalijambe Sragen . The research method used is "Reasearch and Developement" approach. "Preliminary studies show that 43.0% of respondents considered that the O'Brien style was very important to be developed with a model of skill-based exercise based on biomechanics, as many as 40.0% ressponden stated that it is important to be developed with biomechanics based learning media. Therefore, it is deemed necessary to develop the learning media of the O'Brien style-based training skills based on biomechanical studies. Development of media starts from the design of the storyboard and script form that will be used as media. The design of this model is called the draft model. Draft models that have been prepared are reviewed by the multimedia expert and the O'Brien style expert to get the product's validity. A total of 78.24% of experts declare a viable product with some input. In small groups with n = 6, earned value 72.2% was obtained or valid enough to be tested in large groups. In the large group test with n = 12,values obtained 70.83% or quite feasible to be tested in the field. In the field test, experimental group was prepared with treatment according to media and control group with free treatment. From result of counting of significance test can be

Research and development project reports for FY 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-09-01

The paper reported NEDO`s research and development project in fiscal 1995. As for the development of solar energy utilization technology, conducted were R and D of solar cells and development of the photovoltaic power generation. As to the solar heat utilization technology, R and D were carried out on the chemical energy conversion technology and high efficient solar heat space heating and cooling technology. About the geothermal energy utilization technology, developments were made of exploration techniques for fracture-type geothermal reservoirs and the binary cycle geothermal power generation technology. Concerning the coal energy utilization technology, conducted were R and D of coal liquefaction and coal gasification. Relating to the NEDOL process, a 150t/d pilot plant is under construction. As to environmental issues on coal utilization, made was a research on the basic technology of clean coal. In addition, technical developments on the following were done: efficient power generation using fuel cells, hydrogen, alcohol, biomass, wind power generation, etc. 73 figs., 56 tabs.

Research field development ou iron-sulfur proteins by the Moessbauer spectroscopy and EPR

International Nuclear Information System (INIS)

Arsenio, T.P.; Taft, C.A.

1984-01-01

A research line on iron sulfides (chemical and structurally seemed with the iron-sulfur proteins), implanted and developed at CBPF-Brazil, using the same theoretical and experimental models used in the development of the research field on iron-sulfur proteins is reported. The techniques used are Moessbauer spectroscopy and EPR. (L.C.) [pt

Study on production of useful metabolites by development of advanced cell culture techniques using radiation

Energy Technology Data Exchange (ETDEWEB)

Chung, Byung Yeoup; Lee, Seung Sik; Bai, Hyounwoo; Singh, Sudhir; Lee, Eun Mi; Hong, Sung Hyun; Park, Chul Hong; Srilatha, B.; Kim, Mi Ja; Lee, Ohchul

2012-01-15

The purpose of this project is improvement of investigation, materialization and evaluation techniques on effectiveness for functional natural compounds throughout development of tissue/cell culture techniques for mass production of useful metabolites using radiation. Research scope includes Development of a technique for radiation tissue and cell culture, Database construction for radiation response in plants and radiation effects, Construction of general-purpose national based techniques of cell culture technique using radiation. Main results are as follow: Development of a technique for radiation tissue and cell culture for Erigeron breviscapus (Vant.) Hand. Mazz.; Identification and functional analysis of AtTDX (chaperone and peroxidase activities); Functional analysis of radiation(gamma ray, electron beam, and proton beam) induced chaperon protein activities (AtTDX); Determine the action mechanism of yPrx2; Development of transgenic plant with bas I gene from Arabidopsis; Development of transgenic plant with EoP gene from centipedegrass; Identification of radiation induced multi functional compounds from Aloe; Determination of the effects of radiation on removing undesirable color and physiological activities (Schizandra chinensis baillon, centipedegrass); Determine the action mechanism of transgenic plant with 2-Cys Prx for heat stress resistance; Determination of the effects of centipedegrass extracts on anti-cancer activities; Functional analysis of centipedegrass extracts (anti-virus effects)

Development of recycling techniques on decommissioning concrete waste

International Nuclear Information System (INIS)

Ishikura, Takeshi; Oguri, Daiichiro; Sukekiyo, Mitsuaki

2000-01-01

Nuclear Power Engineering Corporation (NUPEC) has been developing decommissioning techniques, implemented under a contract with the Ministry of International Trade and Industry (MITI), to verify and improve the performance of the key decommissioning techniques. One of main themes is on concrete recycling techniques, which deals with high quality aggregate retrieval from concrete waste, high efficient usage of the by-product powder to recycling products, and effective usage of radioactive concrete to filling material for waste form. This paper describes progress and accomplishment on the concrete recycling technique development which started in 1996. (author)

Facilities for Research and Development of Medical Radioisotopes

International Nuclear Information System (INIS)

Shin, Byung Chul; Choung, Won Myung; Park, Jin Ho

2003-03-01

This study is carried out by KAERI(Korea Atomic Energy Research Institute) to construct the basic facilities for development and production of medical radioisotope. For the characteristics of radiopharmaceuticals, the facilities should be complied with the radiation shield and GMP(Good Manufacturing Practice) guideline. The KAERI, which has carried out the research and development of the radiopharmaceuticals, made a design of these facilities and built them in the HANARO Center and opened the technique and facilities to the public to give a foundation for research and development of the radiopharmaceuticals. In the facilities, radiation shielding utilities and GMP instruments were set up and their operating manuals were documented. Every utilities and instruments were performed the test to confirm their efficiency and the approval for use of the facilities will be achieved from MOST(Ministry of Science and Technology). It is expected to be applied in development of therapeutic radioisotope such as Re-188 generator and Ho-166, as well as Tc-99m generator and Sr-89 chloride for medical use. And it also looks forward to the contribution to the related industry through the development of product in high demand and value

Laboratory directed research and development

Energy Technology Data Exchange (ETDEWEB)

1991-11-15

The purposes of Argonne's Laboratory Directed Research and Development (LDRD) Program are to encourage the development of novel concepts, enhance the Laboratory's R D capabilities, and further the development of its strategic initiatives. Among the aims of the projects supported by the Program are establishment of engineering proof-of-principle''; development of an instrumental prototype, method, or system; or discovery in fundamental science. Several of these project are closely associated with major strategic thrusts of the Laboratory as described in Argonne's Five Year Institutional Plan, although the scientific implications of the achieved results extend well beyond Laboratory plans and objectives. The projects supported by the Program are distributed across the major programmatic areas at Argonne. Areas of emphasis are (1) advanced accelerator and detector technology, (2) x-ray techniques in biological and physical sciences, (3) advanced reactor technology, (4) materials science, computational science, biological sciences and environmental sciences. Individual reports summarizing the purpose, approach, and results of projects are presented.

Thirty Years Researches on Development for Sustainable Concrete Technology

Directory of Open Access Journals (Sweden)

Sim Jongsung

2017-01-01

Full Text Available The enormous amount of concrete production has a serious impact on energy, resources, environment and ecosystem. Therefore, the issue of development of sustainable concrete technology with little impact on the environment is becoming a major issue. In this paper, researches related with sustainable development of concrete are presented in last three decades. FRP has high corrosion resistance and lightweight, thus it can be potential solution for sustainable development of concrete structures as strengthening material or reinforcement instead of steel. Researches and techniques are presented on performance of concrete beam with FRP rebar and enhancing performance of existing concrete structure using FRP strengthening methods. The application of recycled concrete aggregate (RCA has sometimes been limited in the practice and remained in the low-valued purposes only such as road base materials. In past 10 years, a great improvement in the recycling technique to produce RCA of which quality is close to natural aggregate, hence the applicability and evaluation of RCA are presented in this paper. This paper includes experimental studies for application of waste glass which could decrease CO2 emission from cement producing. The achievements of these studies are presented in this paper to contribute for sustainable development of concrete infrastructures.

A research on applications of qualitative reasoning techniques in Human Acts Simulation Program

International Nuclear Information System (INIS)

Far, B.H.

1992-04-01

Human Acts Simulation Program (HASP) is a ten-year research project of the Computing and Information Systems Center of JAERI. In HASP the goal is developing programs for an advanced intelligent robot to accomplish multiple instructions (for instance, related to surveillance, inspection and maintenance) in nuclear power plants. Some recent artificial intelligence techniques can contribute to this project. This report introduces some original contributions concerning application of Qualitative Reasoning (QR) techniques in HASP. The focus is on the knowledge-intensive tasks, including model-based reasoning, analytic learning, fault diagnosis and functional reasoning. The multi-level extended qualitative modeling for the Skill-Rule-Knowledge (S-R-K) based reasoning, that included the coordination and timing of events, Qualitative Sensitivity analysis (Q S A), Subjective Qualitative Fault Diagnosis (S Q F D) and Qualitative Function Formation (Q F F ) techniques are introduced. (author) 123 refs

Study and development of equipment supervision technique system and its management software for nuclear electricity production

International Nuclear Information System (INIS)

Zhang Liying; Zou Pingguo; Zhu Chenghu; Lu Haoliang; Wu Jie

2008-01-01

The equipment supervision technique system, which standardized the behavior of supervision organizations in planning and implementing of equipment supervision, is built up based on equipment supervision technique documents, such as Quality Supervision Classifications, Special Supervision Plans and Supervision Guides. Furthermore, based on the research, the equipment supervision management information system is developed by Object Oriented Programming, which consists of supervision information, supervision technique, supervision implementation, quality statistics and analysis module. (authors)

Co-ordinated research project on application of nuclear techniques in the prevention of degenerative diseases (obesity and non-Insulin dependent diseases) in ageing. Report on the second research co-ordination meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-07-01

In the developed countries, research using nuclear methods has been substantially used to examine the physiological and biochemical mechanisms involved in obesity-related diseases. This Co-ordinated Research Project (CRP) is intended to promote the use of these techniques in the developing world. The specific objectives of this CRP are: 1. To define the magnitude of the obesity/NIDDM problem in developing countries. 2. To identify vulnerable groups at high risk. 3. To describe the metabolic mechanisms involved. The purpose of this first Research Co-ordination Meeting (RCM) was thus to develop a worldwide collaboration in the use of nuclear and isotopic techniques to investigate the aetiology of degenerative diseases in ageing. All countries participating in this CRP are going through the epidemiological transition with changes in lifestyles to approach those seen in the developed nations.

Second research co-ordination meeting for the coordinated research project on 'Application of nuclear techniques in the prevention of degenerative diseases (obesity and non-insulin dependent diseases) in ageing'. Summary report

International Nuclear Information System (INIS)

Iyengar, G.V.; Mokhtar, N.

2002-01-01

In the developed countries, research using nuclear methods has been substantially used to examine the physiological and biochemical mechanisms involved in obesity-related diseases. This Co-ordinated Research Project (CRP) is intended to promote the use of these techniques in the developing world. The specific objectives of this CRP are: 1. To define the magnitude of the obesity/NIDDM problem in developing countries. 2. To identify vulnerable groups at high risk. 3. To describe the metabolic mechanisms involved. The purpose of this first Research Co-ordination Meeting (RCM) was thus to develop a worldwide collaboration in the use of nuclear and isotopic techniques to investigate the aetiology of degenerative diseases in ageing. All countries participating in this CRP are going through the epidemiological transition with changes in lifestyles to approach those seen in the developed nations

Co-ordinated research project on application of nuclear techniques in the prevention of degenerative diseases (obesity and non-Insulin dependent diseases) in ageing. Report on the second research co-ordination meeting

International Nuclear Information System (INIS)

2002-01-01

In the developed countries, research using nuclear methods has been substantially used to examine the physiological and biochemical mechanisms involved in obesity-related diseases. This Co-ordinated Research Project (CRP) is intended to promote the use of these techniques in the developing world. The specific objectives of this CRP are: 1. To define the magnitude of the obesity/NIDDM problem in developing countries. 2. To identify vulnerable groups at high risk. 3. To describe the metabolic mechanisms involved. The purpose of this first Research Co-ordination Meeting (RCM) was thus to develop a worldwide collaboration in the use of nuclear and isotopic techniques to investigate the aetiology of degenerative diseases in ageing. All countries participating in this CRP are going through the epidemiological transition with changes in lifestyles to approach those seen in the developed nations

Genetic engineering technology for the improvement of the sterile insect technique. Proceedings of a final research co-ordination meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-01-01

Since the beginning of the joint FAO/IAEA programme on the research and development of insect pest control methodology, emphasis has been placed on the basic and applied aspects of implementing the sterile insect technique (SIT). Special emphasis has always been directed at the assembly of technological progress into workable systems that can be implemented in developing countries. The general intention is to solve problems associated with insect pests that have an adverse impact on production of food and fibre. For several insect species SIT has proven to be a powerful method for control. This includes the New World screwworm fly (Cochliomyia hominivorox), the Mediterranean fruit fly (Ceratitis capitata), the melon fly (Bactrocera cucurbitae), the Queensland fruit fly (Bactrocera tryoni) and one tsetse fly species (Glossina austeni). Improvements of the SIT are possible, especially through the use of molecular techniques. The final report of the Co-ordinated Research Programme on ``Genetic Engineering Technology for the Improvement of the Sterile Insect Technique`` highlights the progress made towards the development of transformation systems for non-drosophilid insects and the research aimed at the identification and engineering of potential target genes or traits. Refs, figs, tabs.

Genetic engineering technology for the improvement of the sterile insect technique. Proceedings of a final research co-ordination meeting

International Nuclear Information System (INIS)

1998-01-01

Since the beginning of the joint FAO/IAEA programme on the research and development of insect pest control methodology, emphasis has been placed on the basic and applied aspects of implementing the sterile insect technique (SIT). Special emphasis has always been directed at the assembly of technological progress into workable systems that can be implemented in developing countries. The general intention is to solve problems associated with insect pests that have an adverse impact on production of food and fibre. For several insect species SIT has proven to be a powerful method for control. This includes the New World screwworm fly (Cochliomyia hominivorox), the Mediterranean fruit fly (Ceratitis capitata), the melon fly (Bactrocera cucurbitae), the Queensland fruit fly (Bactrocera tryoni) and one tsetse fly species (Glossina austeni). Improvements of the SIT are possible, especially through the use of molecular techniques. The final report of the Co-ordinated Research Programme on ''Genetic Engineering Technology for the Improvement of the Sterile Insect Technique'' highlights the progress made towards the development of transformation systems for non-drosophilid insects and the research aimed at the identification and engineering of potential target genes or traits

[Development of computer aided forming techniques in manufacturing scaffolds for bone tissue engineering].

Science.gov (United States)

Wei, Xuelei; Dong, Fuhui

2011-12-01

To review recent advance in the research and application of computer aided forming techniques for constructing bone tissue engineering scaffolds. The literature concerning computer aided forming techniques for constructing bone tissue engineering scaffolds in recent years was reviewed extensively and summarized. Several studies over last decade have focused on computer aided forming techniques for bone scaffold construction using various scaffold materials, which is based on computer aided design (CAD) and bone scaffold rapid prototyping (RP). CAD include medical CAD, STL, and reverse design. Reverse design can fully simulate normal bone tissue and could be very useful for the CAD. RP techniques include fused deposition modeling, three dimensional printing, selected laser sintering, three dimensional bioplotting, and low-temperature deposition manufacturing. These techniques provide a new way to construct bone tissue engineering scaffolds with complex internal structures. With rapid development of molding and forming techniques, computer aided forming techniques are expected to provide ideal bone tissue engineering scaffolds.

Techniques for materials research with synchrotron radiation x-rays

International Nuclear Information System (INIS)

Bowen, D.K.

1983-01-01

A brief introductory survey is presented of the properties and generation of synchrotron radiation and the main techniques developed so far for its application to materials problems. Headings are:synchrotron radiation; X-ray techniques in synchrotron radiation (powder diffraction; X-ray scattering; EXAFS (Extended X-ray Absorption Fine Structure); X-ray fluorescent analysis; microradiography; white radiation topography; double crystal topography); future developments. (U.K.)

Developing Short Films of Geoscience Research

Science.gov (United States)

Shipman, J. S.; Webley, P. W.; Dehn, J.; Harrild, M.; Kienenberger, D.; Salganek, M.

2015-12-01

In today's prevalence of social media and networking, video products are becoming increasingly more useful to communicate research quickly and effectively to a diverse audience, including outreach activities as well as within the research community and to funding agencies. Due to the observational nature of geoscience, researchers often take photos and video footage to document fieldwork or to record laboratory experiments. Here we present how researchers can become more effective storytellers by collaborating with filmmakers to produce short documentary films of their research. We will focus on the use of traditional high-definition (HD) camcorders and HD DSLR cameras to record the scientific story while our research topic focuses on the use of remote sensing techniques, specifically thermal infrared imaging that is often used to analyze time varying natural processes such as volcanic hazards. By capturing the story in the thermal infrared wavelength range, in addition to traditional red-green-blue (RGB) color space, the audience is able to experience the world differently. We will develop a short film specifically designed using thermal infrared cameras that illustrates how visual storytellers can use these new tools to capture unique and important aspects of their research, convey their passion for earth systems science, as well as engage and captive the viewer.

Framework for a sustainable development of neutron beam work in the smaller research reactors

International Nuclear Information System (INIS)

Carvalho, F.G.; Margaca, F.M.A.

1995-01-01

The authors analyze the present situation of research reactors for neutron beam work in the light of the changes that took place in the nuclear field during the last decades. Trends in supply and demand of neutron beam time in view of the specific requirements of the techniques and of the user's community are outlined. It is argued that resources, both human and material, should be considered in a global perspective, encompassing the national, regional and international levels, where national facilities, mostly low flux research reactors, should be looked upon as a valuable component of a commonwealth of resources to be usefully exploited for the benefit of the neutron user's community at large. The importance of international cooperation to develop a higher level of research reactor utilization is emphasized while suggestions concerning the role of IAEA are made, particularly, to promote the mobility of scientists and engineers directed from developed to less developed countries (LDC's) where research reactors are in operation. The potential of small research reactors in LDC's as an instrument of the country's general scientific and technological development is pointed out as well as difficulties commonly experienced and essential requirements of a successful performance with emphasis on the importance of establishing close links with the national scientific community and especially with university groups. The scientific and technological relevance of neutron scattering techniques is discussed. Reference is made to the techniques best suited to modest research reactor facilities as well as to the importance of developing a local competence in instrument design, optimization and construction. (author). 12 refs

Welding techniques development of CLAM steel for Test Blanket Module

Energy Technology Data Exchange (ETDEWEB)

Li Chunjing [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, Anhui, 230027 (China)], E-mail: lcj@ipp.ac.cn; Huang Qunying; Wu Qingsheng; Liu Shaojun [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China); School of Nuclear Science and Technology, University of Science and Technology of China, Hefei, Anhui, 230027 (China); Lei Yucheng [Jiangsu University, Zhenjiang, Jiangsu, 212013 (China); Muroga, Takeo; Nagasaka, Takuya [National Institute for Fusion Science, Toki, Jifu, 509-5292 (Japan); Zhang Jianxun [Xi' an Jiaotong University, Xi' an, Shanxi, 710049 (China); Li Jinglong [Northwestern Polytechnical University, Xi' an, Shanxi, 710072 (China)

2009-06-15

Fabrication techniques for Test Blanket Module (TBM) with CLAM are being under development. Effect of surface preparation on the HIP diffusion bonding joints was studied and good joints with Charpy impact absorbed energy close to that of base metal have been obtained. The mechanical properties test showed that effect of HIP process on the mechanical properties of base metal was little. Uniaxial diffusion bonding experiments were carried out to study the effect of temperature on microstructure and mechanical properties. And preliminary experiments on Electron Beam Welding (EBW), Tungsten Inert Gas (TIG) Welding and Laser Beam Welding (LBW) were performed to find proper welding techniques to assemble the TBM. In addition, the thermal processes assessed with a Gleeble thermal-mechanical machine were carried out as well to assist the fusion welding research.

Development and efficacy of music therapy techniques within palliative care.

Science.gov (United States)

Clements-Cortés, Amy

2016-05-01

Music therapy is increasingly becoming an intervention used in palliative care settings around the globe. While the specialty of palliative care music therapy is relatively young having emerged in the late 1980s, there is a strong and growing body of evidence demonstrating its efficacy in assisting a variety of issues common at end-of-life. There are multiple music therapy techniques that are implemented with clients in palliative care and they can be categorized in four broad areas: receptive, creative, recreative and combined. These techniques will be presented with respect to their development by clinicians as supported by the descriptive and research literature. Information is also provided on the use of music therapy in facilitating the grieving and bereavement process. Copyright © 2015 Elsevier Ltd. All rights reserved.

Research and development of the industrial basic technologies of the next generation, 'composite materials (resin-based)'. Evaluation of the first phase research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'fukugo zairyo (jushikei)'. Daiikki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1984-03-30

The results of the first phase research and development project for developing the resin-based composite materials as the basic technologies of the next generation are evaluated. This project is aimed at development of the resin-based composite materials as light, high-strength and high-rigidity structural materials. Development of the basic techniques for these materials is of high significance, and highly rated. The first R and D phase efforts are directed to synthesis of new skeleton and terminal compounds, and their introduction into the matrices; application/combination of various fiber surface modification techniques; development of the basic techniques for intermediate materials for three-dimensional fabrics, triaxial fabrics and hybrid materials; improvement of the main techniques for a series of molding/processing steps; adoption of new methods; and development of design programs and elementary design techniques. The technical targets of improving functions of each item have been achieved, or bright prospects have been obtained therefor, each involving potentials of functional improvements by developing new functions. It is also considered that the parallel, competitive development and promotion of 7 routes in researches on the matrix resins have brought great effects. (NEDO)

Artificial Intelligence Techniques: Applications for Courseware Development.

Science.gov (United States)

Dear, Brian L.

1986-01-01

Introduces some general concepts and techniques of artificial intelligence (natural language interfaces, expert systems, knowledge bases and knowledge representation, heuristics, user-interface metaphors, and object-based environments) and investigates ways these techniques might be applied to analysis, design, development, implementation, and…

Developing a Research Instrument to Document Awareness, Knowledge, and Attitudes Regarding Breast Cancer and Early Detection Techniques for Pakistani Women: The Breast Cancer Inventory (BCI).

Science.gov (United States)

Naqvi, Atta Abbas; Zehra, Fatima; Ahmad, Rizwan; Ahmad, Niyaz

2016-12-09

There is a general hesitation in participation among Pakistani women when it comes to giving their responses in surveys related to breast cancer which may be due to the associated stigma and conservatism in society. We felt that no research instrument was able to extract information from the respondents to the extent it was needed for the successful execution of our study. The need to develop a research instrument tailored for Pakistani women was based upon the fact that most Pakistani women come from a conservative background and sometimes view this topic as provocative and believe discussing publicly about it as inappropriate. Existing research instruments exhibited a number of weaknesses during literature review. Therefore, using them may not be able to extract information concretely. A research instrument was, thus, developed exclusively. It was coined as, "breast cancer inventory (BCI)" by a panel of experts for executing a study aimed at documenting awareness, knowledge, and attitudes of Pakistani women regarding breast cancer and early detection techniques. The study is still in the data collection phase. The statistical analysis involved the Kaiser-Meyer-Olkin (KMO) measure and Bartlett's test for sampling adequacy. In addition, reliability analysis and exploratory factor analysis (EFA) were, also employed. This concept paper focuses on the development, piloting and validation of the BCI. It is the first research instrument which has high acceptability among Pakistani women and is able to extract adequate information from the respondents without causing embarrassment or unease.

Development of welding technique by remote control at the JMTR Hot Laboratory

International Nuclear Information System (INIS)

Shimizu, Michio; Iwamatu, Sigemi; Takada, Humiki

2000-03-01

Several kinds of welding techniques have been systematically developed using the remote controlled procedures in the JMTR Hot Laboratory. These are as follows, (1) re-instrumentation's of FP gas pressure gauge and thermocouple to an irradiated fuel rod for the centerline temperature measurement, (2) welding of the un-irradiated/irradiated specimen and machining process to produce tensile test specimens, (3) fabrication of Co-60 radiation source from materials for reactivity adjustment in JMTR core, (4) re-capsuling of irradiated materials in the different types of irradiation facilities. These research and development of circumferential and sealed welding for capsuling and welding of irradiated specimen for re-irradiation were implemented under the remote-controlled conditions in the Hot Cell. These techniques will be very indispensable for supporting the irradiation experiments to be conducted in the JMTR. (author)

Development of tritium-handling technique

International Nuclear Information System (INIS)

Ohmura, Hiroshi; Hosaka, Akio; Okamoto, Takahumi

1988-01-01

The overview of developing activities for tritium-handling techniques in IHI are presented. To establish a fusion power plant, tritium handling is one of the key technologies. Recently in JAERI, conceptual design of FER (Fusion Experimental Reactor) has been carried out, and the FER system requires a processing system for a large amount of tritium. IHI concentrate on investigation of fuel gas purification, isotope separation and storage systems under contract with Toshiba Corporation. Design results of the systems and each components are reviewed. IHI has been developing fundamental handling techniques which are the ZrNi bed for hydrogen isotope storage and isotope separation by laser. The ZrNi bed with a tritium storage capacity of 1000 Ci has been constructed and recovery capability of the hydrogen isotope until 10 -4 Torr {0.013 Pa} was confirmed. In laser isotope separation, the optimum laser wave length has been determined. (author)

Development of radioactive waste treatment technique

International Nuclear Information System (INIS)

Kikuchi, Makoto; Amamiya, Shigeru; Yusa, Hideo.

1984-01-01

The techniques of radioactive waste treatment are generally reviewed, placing emphasis on volume reduction and solidification techniques. After a brief description on the general process of radioactive waste treatment, some special technologies being developed by Hitachi Ltd. are explained. From the viewpoints of the volume reduction, long term management and final disposal of wastes, the pelletization of dried waste and the solidification with inorganic substances are considered. One of the features of the pelletization system is to treat various kinds of wastes such as concentrated liquid wastes and used resins by the same system. The flow diagram of the system and its special features are shown. The volume reduction achieved by this system as compared to the conventional method is about 1/7. The first commercial plant for the treatment of concentrated liquid waste is scheduled to begin operation in June, 1984. As for the solidification technique for waste disposal, the use of cement glass is considered. The solidification system being developed is shortly described. (Aoki, K.)

Development on application of ultrasonic sealing techniques to plutonium transportation cask

International Nuclear Information System (INIS)

Hayakawa, Tsuyoshi; Akiba, Mitsunori; D'Agraives, B.C.

1994-01-01

In a cooperation research between Power Reactor and Nuclear Fuel Development Corporation and Commission of the European Communities, Joint Research Centre, Ispra establishment, application of ultrasonic sealing techniques to a plutonium container is developed in Ispra. The seal is derived from the sealing-bolt technology currently in use at the BNFL site of sellafield (UK) for the safeguarding of underwater spent fuel storage containers called MEBs. In this technique, one of the normal bolts closing the lid of the container is replaced by a special ultrasonically verifiable sealing-bolt. In the application to the plutonium container, it is proposed to attach a clamping seal which has the same internal configuration as a MEB sealing-bolt but is fastened with a 'one-way' mechanism to one of the protruding pins of the container. Similarly the seal is provided with an identity and integrity features. The uniqueness of the identity, as well as the integrity can be checked on the spot by an inspector carrying a reading equipment. Thus, in a few minutes, one identifies the seal and knows whether its integrity is intact, which tells that the container has not been opened or attempted to open illeagally. By application of the seal to the plutonium container, the containment/surveillance during the transportation will be upgraded. (author)

Development of Ultraviolet (UV) Radiation Protective Fabric Using Combined Electrospinning and Electrospraying Technique

Science.gov (United States)

Sinha, Mukesh Kumar; Das, B. R.; Kumar, Kamal; Kishore, Brij; Prasad, N. Eswara

2017-06-01

The article reports a novel technique for functionization of nanoweb to develop ultraviolet (UV) radiation protective fabric. UV radiation protection effect is produced by combination of electrospinning and electrospraying technique. A nanofibrous web of polyvinylidene difluoride (PVDF) coated on polypropylene nonwoven fabric is produced by latest nanospider technology. Subsequently, web is functionalized by titanium dioxide (TiO2). The developed web is characterized for evaluation of surface morphology and other functional properties; mechanical, chemical, crystalline and thermal. An optimal (judicious) nanofibre spinning condition is achieved and established. The produced web is uniformly coated by defect free functional nanofibres in a continuous form of useable textile structural membrane for ultraviolet (UV) protective clothing. This research initiative succeeds in preparation and optimization of various nanowebs for UV protection. Field Emission Scanning Electron Microscope (FESEM) result reveals that PVDF webs photo-degradative behavior is non-accelerated, as compared to normal polymeric grade fibres. Functionalization with TiO2 has enhanced the photo-stability of webs. The ultraviolet protection factor of functionalized and non-functionalized nanowebs empirically evaluated to be 65 and 24 respectively. The developed coated layer could be exploited for developing various defence, para-military and civilian UV protective light weight clothing (tent, covers and shelter segments, combat suit, snow bound camouflaging nets). This research therefore, is conducted in an attempt to develop a scientific understanding of PVDF fibre coated webs for photo-degradation and applications for defence protective textiles. This technological research in laboratory scale could be translated into bulk productionization.

Development of technique on the induction and selection of in vitro mutant lines (Potato, Solanum tuberosum L.)

Energy Technology Data Exchange (ETDEWEB)

Yoo, Jang Ryoel; Lee, Yeong Il; Song, Hee Seop; Kim, Jae Seong; Sin, In Cheol; Lee, Sang Jae; Lee, Ki Un; Lim, Yong Taek [Korea Atomic Energy Res. Inst., Taejon (Korea, Republic of)

1993-09-01

For the development of the technique on the plant tissue culture and application of nuclear technique in the in vitro mutation breeding, present research laid emphasis on the development of techniques of potato tissue culture, and on the induction and selection of radiation mutation. Another culture for haploid induction, optimum radiation dosage for cybrid formation of potato and mutation induction from in vitro cultured microtuber and plantlets were investigated for modelling the technique on the induction and selection of in vitro mutant lines. Inheritance stability of the selected mutants were also studied in field condition. In vitro system of micropropagation and selection of mutation was summarized.

Development of technique on the induction and selection of in vitro mutant lines (Potato, Solanum tuberosum L.)

International Nuclear Information System (INIS)

Yoo, Jang Ryoel; Lee, Yeong Il; Song, Hee Seop; Kim, Jae Seong; Sin, In Cheol; Lee, Sang Jae; Lee, Ki Un; Lim, Yong Taek

1993-09-01

For the development of the technique on the plant tissue culture and application of nuclear technique in the in vitro mutation breeding, present research laid emphasis on the development of techniques of potato tissue culture, and on the induction and selection of radiation mutation. Another culture for haploid induction, optimum radiation dosage for cybrid formation of potato and mutation induction from in vitro cultured microtuber and plantlets were investigated for modelling the technique on the induction and selection of in vitro mutant lines. Inheritance stability of the selected mutants were also studied in field condition. In vitro system of micropropagation and selection of mutation was summarized

Development of optical techniques for chemical engineering applications

Energy Technology Data Exchange (ETDEWEB)

Lamadie, F.; Charton, S.; Langlard, M. de; Ouattara, M.; Sentis, M. [CEA, Centre de Marcoule, DEN,DTEC,SGCS, F-30207 Marcoule (France)

2016-07-01

The design of separation processes for nuclear spend fuel treatment, dedicated to either research studies or industrial applications, is currently based on a phenomenological approach, relying on Computational Fluid Dynamics, and complemented by validation tests performed at small-scale. Indeed, most of the steps of the Purex process involve multiphasic flows (dissolution, leaching, liquid-liquid extraction, precipitation, filtration, etc.). Therefore an accurate knowledge of the dispersed phase properties is required in order to assess their coupling with the flow features, to predict the process performance and efficiency and to achieve size reduction or extrapolation. Hence, the measurements of particulate flows properties, and especially the particles (or drops or bubbles) size distribution, concentration (i.e. hold-up) and velocity has become a growing issue. Relevant techniques for measuring these flow properties are multiple, from the high-speed video acquisition coupled to image processing to the laser-induced fluorescence, including the particle imaging velocimetry or interferometric techniques (digital in-line holography, rainbow refractometry, etc.). In this communication, different techniques developed at CEA Marcoule for the characterization of multiphase flows, will be introduced. The strong interaction with computational fluid dynamics, in the scope of a multi-scale approach, will be discussed through typical results of gas-liquid, liquid-liquid and solid-liquid flows possibly encountered in nuclear fuel reprocessing process. (authors)

Ion beam techniques for the analysis of light elements in thin films, including depth profiling. Final report of a co-ordinated research project 2000-2003

International Nuclear Information System (INIS)

2004-10-01

This publication highlights the achievements of a Coordinated Research Project (CRP) to promote the potential of accelerator-based nuclear techniques of analysis for light elements in thin films. The objectives of this CRP were to develop a coordinated research effort between accelerator laboratories and materials science research groups in order to assist and promote the development of quality assurance methods, to evaluate databases of parameters needed for quantitative analysis, and to develop and apply techniques to selected problems concerning the surface modification of materials and production of thin films. Through various case studies, this publication assesses and demonstrates the effectiveness of accelerator-based nuclear techniques for analysis to provide valuable data and knowledge not readily accessible using other methods

Developing questionnaires for educational research: AMEE Guide No. 87

Science.gov (United States)

La Rochelle, Jeffrey S.; Dezee, Kent J.; Gehlbach, Hunter

2014-01-01

In this AMEE Guide, we consider the design and development of self-administered surveys, commonly called questionnaires. Questionnaires are widely employed in medical education research. Unfortunately, the processes used to develop such questionnaires vary in quality and lack consistent, rigorous standards. Consequently, the quality of the questionnaires used in medical education research is highly variable. To address this problem, this AMEE Guide presents a systematic, seven-step process for designing high-quality questionnaires, with particular emphasis on developing survey scales. These seven steps do not address all aspects of survey design, nor do they represent the only way to develop a high-quality questionnaire. Instead, these steps synthesize multiple survey design techniques and organize them into a cohesive process for questionnaire developers of all levels. Addressing each of these steps systematically will improve the probabilities that survey designers will accurately measure what they intend to measure. PMID:24661014

Development of remote vibration measurement technique through turbulent media

Energy Technology Data Exchange (ETDEWEB)

Baik, Sung Hoon; Chung, Chin Man; Kim, Min Suk; Park, Seung Kyu; Chung, Heung Jone

2002-12-01

The effect of wavefront distortion of laser beam of a LDV(Laser Doppler Vibrometer) in the turbulence media was investigated for application of adaptive optics to LDV. The high-speed tip/tilt adaptive optics system and closed-loop steering algorithm were developed for real-time correction of the direction fluctuation of the laser beam of LDV. The measuring performance of the LDV was improved when the steering system was applied to LDV at the vibration frequency range of 10 Hz - 30 Hz. The high-speed Shack-Hartmann wavefront sensor(400 Hz) was developed to measure the performance of the LDV due to wavefront distortion. The wavefront distortion due to the turbulence media induced low visibility and degraded the performance of the vibrometer. From the experiments, when the wavefront distortion is above 2 wavelengths in the cross section of the laser beam(dia. 20 mm), the vibration signal from laser vibrometer was severely degraded. When the wavefront distortion is smaller than one wave, the vibration signal was good. From the this research, high-speed closed-loop tip/tilt control technique of the laser beam was developed and applied to the laser metrology area. In the future, the adaptive optics system for wavefront correction will be applied to other research area.

Prosopography of social and political groups historically located: method or research technique?

Directory of Open Access Journals (Sweden)

Lorena Madruga Monteiro

2014-06-01

Full Text Available The prosopographical approach has been questioned in different disciplinary domains as its scientific nature. The debate prosopography is a technique, a tool for research, an auxiliary science or method transpires in scientific arguments and those who are dedicated to explaining the prosopographical research assumptions. In the social sciences, for example, prosopography is not seen only as an instrument of research, but as a method associated with a theoretical construct to apprehend the social world. The historians that use prosopographic analysis, in turn, oscillate about the analysis of collective biography is a method or a polling technique. Given this setting we aimed at in this article, discuss the prosopographical approach from their different uses. The study presents a literature review, demonstrating the technique of prosopography as historical research, and further as a method of sociological analysis, and then highlight your procedures and methodological limits.

Nuclear and isotopic techniques for addressing nutritional problems, with special reference to current applications in developing countries.

Science.gov (United States)

Iyengar, Venkatesh

2002-03-01

Nuclear and isotopic techniques are valuable tools in human nutritional research studies. Isotopes, both radioactive and nonradioactive, enable detailed evaluations of nutrient intake, body composition, energy expenditure, status of micronutrients, and nutrient bioavailability. In recent times, isotopic methods have been widely used in a number of coordinated research projects and technical cooperation projects of the International Atomic Energy Agency's Nutrition Programme. The doubly labeled water technique combines the use of the stable isotopes oxygen-18 and hydrogen-2 (deuterium) to measure total energy expenditure in free-living human subjects, and to investigate the magnitude and causes of both undernutrition and the emergence of obesity in developing countries. The deuterium dilution technique is a reliable tool to measure breastmilk intake and thereby infant growth and development. In collaboration with the World Health Organization's Growth Monitoring Program, this technique is being used to generate new data on growth standards for children in developing countries. This technique is also used in the measurement of body composition by the estimation of lean body mass and fat mass in individuals. Stable isotopes of iron and zinc have been successfully used to assess the nutritional impact of several nationwide food supplementation-programs conducted on pregnant and lactating women and children in both industrialized and developing countries. Isotopic techniques are especially suitable for monitoring changes in body composition, energy metabolism, and mineral status (with particular reference to osteoporosis) in the elderly. Nuclear methods have also served to develop models for a physiological reference man in Asia in support of radiological health and safety issues, for establishing elemental composition of foods, and for measurement of pollutants in the environment.

Development of advanced strain diagnostic techniques for reactor environments.

Energy Technology Data Exchange (ETDEWEB)

Fleming, Darryn D.; Holschuh, Thomas Vernon,; Miller, Timothy J.; Hall, Aaron Christopher; Urrea, David Anthony,; Parma, Edward J.,

2013-02-01

The following research is operated as a Laboratory Directed Research and Development (LDRD) initiative at Sandia National Laboratories. The long-term goals of the program include sophisticated diagnostics of advanced fuels testing for nuclear reactors for the Department of Energy (DOE) Gen IV program, with the future capability to provide real-time measurement of strain in fuel rod cladding during operation in situ at any research or power reactor in the United States. By quantifying the stress and strain in fuel rods, it is possible to significantly improve fuel rod design, and consequently, to improve the performance and lifetime of the cladding. During the past year of this program, two sets of experiments were performed: small-scale tests to ensure reliability of the gages, and reactor pulse experiments involving the most viable samples in the Annulated Core Research Reactor (ACRR), located onsite at Sandia. Strain measurement techniques that can provide useful data in the extreme environment of a nuclear reactor core are needed to characterize nuclear fuel rods. This report documents the progression of solutions to this issue that were explored for feasibility in FY12 at Sandia National Laboratories, Albuquerque, NM.

Development of testing techniques for mine fan performance

Institute of Scientific and Technical Information of China (English)

WU Zheng-yan; JIANG Shu-guang; PENG Dan-ren

2006-01-01

Three progressive stages of testing techniques are elaborated, which are entirely manual operating, taking separate instruments testing and computer program controlling. The testing method and principle are detailed based on the testing process for meteorological parameters, air pressure, air quality and rotating velocity. And every testing technique is analyzed. Finally, the technique outlook is viewed. All this plays a leading role in development of the testing techniques.

EPRI research program NDE techniques for crack initiation of steam turbine rotor

International Nuclear Information System (INIS)

Goto, T.; Kimura, J.; Kawamoto, K.; Kadoya, Y.; Viswanathan, R.

1990-01-01

EPRI RP 2481-8 aims at the development of nondestructive methods for the life assessment of steam turbine rotor for its crack initiation caused by creep and/or fatigue. As a part of the research project, the demonstration of the state of the art NDE techniques was conducted during June to August of 1988 at EPRI NDE Center, Charlotte, N.C. by Mitsubishi Heavy Industries, Ltd. using four rotors retired after long term service (16-22x10 4 hr). This paper introduces the results of the demonstration

New computing techniques in physics research

International Nuclear Information System (INIS)

Perret-Gallix, D.; Wojcik, W.

1990-01-01

These proceedings relate in a pragmatic way the use of methods and techniques of software engineering and artificial intelligence in high energy and nuclear physics. Such fundamental research can only be done through the design, the building and the running of equipments and systems among the most complex ever undertaken by mankind. The use of these new methods is mandatory in such an environment. However their proper integration in these real applications raise some unsolved problems. Their solution, beyond the research field, will lead to a better understanding of some fundamental aspects of software engineering and artificial intelligence. Here is a sample of subjects covered in the proceedings : Software engineering in a multi-users, multi-versions, multi-systems environment, project management, software validation and quality control, data structure and management object oriented languages, multi-languages application, interactive data analysis, expert systems for diagnosis, expert systems for real-time applications, neural networks for pattern recognition, symbolic manipulation for automatic computation of complex processes

Developing a Research Instrument to Document Awareness, Knowledge, and Attitudes Regarding Breast Cancer and Early Detection Techniques for Pakistani Women: The Breast Cancer Inventory (BCI

Directory of Open Access Journals (Sweden)

Atta Abbas Naqvi

2016-12-01

Full Text Available There is a general hesitation in participation among Pakistani women when it comes to giving their responses in surveys related to breast cancer which may be due to the associated stigma and conservatism in society. We felt that no research instrument was able to extract information from the respondents to the extent it was needed for the successful execution of our study. The need to develop a research instrument tailored for Pakistani women was based upon the fact that most Pakistani women come from a conservative background and sometimes view this topic as provocative and believe discussing publicly about it as inappropriate. Existing research instruments exhibited a number of weaknesses during literature review. Therefore, using them may not be able to extract information concretely. A research instrument was, thus, developed exclusively. It was coined as, “breast cancer inventory (BCI” by a panel of experts for executing a study aimed at documenting awareness, knowledge, and attitudes of Pakistani women regarding breast cancer and early detection techniques. The study is still in the data collection phase. The statistical analysis involved the Kaiser-Meyer-Olkin (KMO measure and Bartlett’s test for sampling adequacy. In addition, reliability analysis and exploratory factor analysis (EFA were, also employed. This concept paper focuses on the development, piloting and validation of the BCI. It is the first research instrument which has high acceptability among Pakistani women and is able to extract adequate information from the respondents without causing embarrassment or unease.

Applying DEA Technique to Library Evaluation in Academic Research Libraries.

Science.gov (United States)

Shim, Wonsik

2003-01-01

This study applied an analytical technique called Data Envelopment Analysis (DEA) to calculate the relative technical efficiency of 95 academic research libraries, all members of the Association of Research Libraries. DEA, with the proper model of library inputs and outputs, can reveal best practices in the peer groups, as well as the technical…

A systematic review of applying modern software engineering techniques to developing robotic systems

Directory of Open Access Journals (Sweden)

Claudia Pons

2012-01-01

Full Text Available Robots have become collaborators in our daily life. While robotic systems become more and more complex, the need to engineer their software development grows as well. The traditional approaches used in developing these software systems are reaching their limits; currently used methodologies and tools fall short of addressing the needs of such complex software development. Separating robotics’ knowledge from short-cycled implementation technologies is essential to foster reuse and maintenance. This paper presents a systematic review (SLR of the current use of modern software engineering techniques for developing robotic software systems and their actual automation level. The survey was aimed at summarizing existing evidence concerning applying such technologies to the field of robotic systems to identify any gaps in current research to suggest areas for further investigation and provide a background for positioning new research activities.

Development of flexural vibration inspection techniques to rapidly assess the structural health of rural bridge systems

Science.gov (United States)

Brian K. Brashaw; Robert Vatalaro; Xiping Wang; Kevin Sarvela; James P. Wacker

2008-01-01

Approximately 4,000 vehicle bridges in the State of Minnesota contain structural timber members. Recent research at the University of Minnesota Duluth Natural Resources Research Institute (UMD NRRI) has been conducted on vibration testing of timber bridges as a means of developing rapid in-place testing techniques for assessing the structural health of bridges. The...

Research on the development of green chemistry technology assessment techniques: a material reutilization case.

Science.gov (United States)

Hong, Seokpyo; Ahn, Kilsoo; Kim, Sungjune; Gong, Sungyong

2015-01-01

This study presents a methodology that enables a quantitative assessment of green chemistry technologies. The study carries out a quantitative evaluation of a particular case of material reutilization by calculating the level of "greenness" i.e., the level of compliance with the principles of green chemistry that was achieved by implementing a green chemistry technology. The results indicate that the greenness level was enhanced by 42% compared to the pre-improvement level, thus demonstrating the economic feasibility of green chemistry. The assessment technique established in this study will serve as a useful reference for setting the direction of industry-level and government-level technological R&D and for evaluating newly developed technologies, which can greatly contribute toward gaining a competitive advantage in the global market.

Applied research on air pollution using nuclear-related analytical techniques

International Nuclear Information System (INIS)

1994-01-01

A co-ordinated research programme (CRP) on applied research on air pollution using nuclear-related techniques is a global CRP which will run from 1992-1996, and will build upon the experience gained by the Agency from the laboratory support that it has been providing for several years to BAPMoN - the Background Air Pollution Monitoring Network programme organized under the auspices of the World Meterological Organization. The purpose of this CRP is to promote the use of nuclear analytical techniques in air pollution studies, e.g. NAA, XFR, and PIXE for the analysis of toxic and other trace elements in suspended particulate matter (including air filter samples), rainwater and fog-water samples, and in biological indicators of air pollution (e.g. lichens and mosses). The main purposes of the core programme are i) to support the use of nuclear and nuclear-related analytical techniques for practically-oriented research and monitoring studies on air pollution ii) to identify major sources of air pollution affecting each of the participating countries with particular reference to toxic heavy metals, and iii) to obtain comparative data on pollution levels in areas of high pollution (e.g. a city centre or a populated area downwind of a large pollution source) and low pollution (e.g. rural areas). This document reports the discussions held during the first Research Co-ordination Meeting (RCM) for the CRP which took place at the IAEA Headquarters in Vienna. Refs, figs and tabs

Methodological integrative review of the work sampling technique used in nursing workload research.

Science.gov (United States)

Blay, Nicole; Duffield, Christine M; Gallagher, Robyn; Roche, Michael

2014-11-01

To critically review the work sampling technique used in nursing workload research. Work sampling is a technique frequently used by researchers and managers to explore and measure nursing activities. However, work sampling methods used are diverse making comparisons of results between studies difficult. Methodological integrative review. Four electronic databases were systematically searched for peer-reviewed articles published between 2002-2012. Manual scanning of reference lists and Rich Site Summary feeds from contemporary nursing journals were other sources of data. Articles published in the English language between 2002-2012 reporting on research which used work sampling to examine nursing workload. Eighteen articles were reviewed. The review identified that the work sampling technique lacks a standardized approach, which may have an impact on the sharing or comparison of results. Specific areas needing a shared understanding included the training of observers and subjects who self-report, standardization of the techniques used to assess observer inter-rater reliability, sampling methods and reporting of outcomes. Work sampling is a technique that can be used to explore the many facets of nursing work. Standardized reporting measures would enable greater comparison between studies and contribute to knowledge more effectively. Author suggestions for the reporting of results may act as guidelines for researchers considering work sampling as a research method. © 2014 John Wiley & Sons Ltd.

Ion bombardment techniques - recent developments in SIMS

International Nuclear Information System (INIS)

Konarski, P.; Miśnik, M.

2013-01-01

We present a short review of cluster ion bombardment technique recently applied in SIMS. Many advantages of using cluster ion beams are specified over monoatomic ion species. Cluster ions open really new perspectives especially in organic based structures analysis. Nevertheless cluster ions are not the perfect solution and still new ideas of ion erosion in SIMS are needed. Another issue discussed is 'storing matter' technique applied for quantitative analysis in SIMS. Simple idea of sputter deposition of eroded material onto rotating substrate and then analysing the stored material allows to avoid strong matrix effects in SIMS. Presented are the results performed in Tele and Radio Research Institute, Warszawa, Poland. These are the first results of ‘storing matter’ technique performed in one analytical chamber of SIMS instrument. (authors)

Research and development of the industrial basic technologies of the next generation, 'composite materials (quality evaluation techniques)'. Evaluation of the first phase research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'fukugo zairyo (hinshitsu hyoka gijutsu)'. Zenki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1985-03-30

The results of the first phase research and development project for developing composite materials as the basic technologies of the next generation are evaluated, and the directions of the R and D evaluation for the second phase are set up. The efforts in the first-phase R and D project are aimed at development of methods for measuring carbon fiber surface structure elements; confirmation of the relationship between adhesive shear strength and active surface area; development of methods for determining fracture toughness by standard specimens; estimation of allowable void fraction for inter-layer shear strength; defect detection and quality evaluation by electromagnetic, ultrasonic, laser holography and AE methods; development of methods for detecting resin setting reactions during the molding processes; and understanding deteriorated mechanical characteristics of the resin-based composites by environmental factors, among others. The objectives of the first-phase project have been almost achieved. It is decided that the second-phase R and D project are directed to investigations on the relationship between surface properties of the fibers in the composites and fiber/matrix adhesion; researches on mechanical characteristics involved in fracture of the structural elements; evaluation of mechanical properties of the metal-based composites and investigations on detecting their defects; elucidation of the effects of environmental factors on their strength; and development of the techniques for integrating detection of molding-induced cracking and that of setting reactivity, among others. (NEDO)

Flow visualization with laser light-sheet techniques in automotive research

International Nuclear Information System (INIS)

Hentschel, W.; Stoffregen, B.

1987-01-01

This paper presents different set-ups for the visualization of flow fields in automotive research i.e. aerodynamics and i.c. engines, with the help of laser light-sheet techniques. Special efforts are made to apply these techniques to temporarily resolved studies of unsteady flows and for the quantitative analysis of a flow field in two dimensions in a full plane instantaneously. Several examples taken from current work are presented

Decommissioning techniques for research reactors. Final report of a co-ordinated research project 1997-2001

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-02-01

In its international role, the IAEA is faced with a wide variety of national situations and different availability of technical, human and financial resources. While it is recognised that nuclear decommissioning is a mature industry in some developed countries, and may soon become a routine activity, the situation is by no means so clear in other countries. In addition, transfer of technologies and know-how from developed to developing countries is not a spontaneous, straightforward process, and will take time and considerable effort. As mandated by its own statute and Member States' requests, the IAEA continues to respond to its Member States by monitoring technological progress, ensuring development of safer and more efficient strategies and fostering international information exchange. Previous co-ordinated research projects (CRP) conducted respectively from 1984 to 1987, and from 1989 to 1993, investigated the overall domain of decommissioning. In those CRPs no distinction was made between decommissioning activities carried out at nuclear power plants, research reactors or nuclear fuel cycle facilities. With technological progress and experience gained, it became clear that decommissioning of research reactors had certain specific characteristics which needed a dedicated approach. In addition, a large number of research reactors reached a state of permanent shutdown in the 1990s and were candidates for prompt decommissioning. With the progressive ageing of research reactors, many more of these units will soon become redundant worldwide and require decommissioning. Within this context, a CRP on Decommissioning Techniques for Research Reactors was launched and conducted by the IAEA from 1997 to 2001 in order to prepare for eventual decommissioning. Concluding reports that summarized the work undertaken under the aegis of the CRP were presented at the third and final Research Co-ordination Meeting held in Kendal, United Kingdom, 14-18 May 2001, and are collected

Decommissioning techniques for research reactors. Final report of a co-ordinated research project 1997-2001

International Nuclear Information System (INIS)

2002-02-01

In its international role, the IAEA is faced with a wide variety of national situations and different availability of technical, human and financial resources. While it is recognised that nuclear decommissioning is a mature industry in some developed countries, and may soon become a routine activity, the situation is by no means so clear in other countries. In addition, transfer of technologies and know-how from developed to developing countries is not a spontaneous, straightforward process, and will take time and considerable effort. As mandated by its own statute and Member States' requests, the IAEA continues to respond to its Member States by monitoring technological progress, ensuring development of safer and more efficient strategies and fostering international information exchange. Previous co-ordinated research projects (CRP) conducted respectively from 1984 to 1987, and from 1989 to 1993, investigated the overall domain of decommissioning. In those CRPs no distinction was made between decommissioning activities carried out at nuclear power plants, research reactors or nuclear fuel cycle facilities. With technological progress and experience gained, it became clear that decommissioning of research reactors had certain specific characteristics which needed a dedicated approach. In addition, a large number of research reactors reached a state of permanent shutdown in the 1990s and were candidates for prompt decommissioning. With the progressive ageing of research reactors, many more of these units will soon become redundant worldwide and require decommissioning. Within this context, a CRP on Decommissioning Techniques for Research Reactors was launched and conducted by the IAEA from 1997 to 2001 in order to prepare for eventual decommissioning. Concluding reports that summarized the work undertaken under the aegis of the CRP were presented at the third and final Research Co-ordination Meeting held in Kendal, United Kingdom, 14-18 May 2001, and are collected

Evaluation of the Program Effectiveness of Research Competence Development in Prospective Elementary School Teachers

Science.gov (United States)

Khan, Natalya N.; Kolumbayeva, Sholpan Zh.; Karsybayeva, Raissa K.; Nabuova, Roza A.; Kurmanbekova, Manshuk B.; Syzdykbayeva, Aigul Dzh.

2016-01-01

To develop research competence in prospective teachers, a system of methods for diagnostics and formation of this competence in prospective elementary school teachers in the training process is designed. To diagnose the research competence, a series of techniques were used that allow subtle evaluation of each competence research component:…

Cognitive Mapping Techniques: Implications for Research in Engineering and Technology Education

Science.gov (United States)

Dixon, Raymond A.; Lammi, Matthew

2014-01-01

The primary goal of this paper is to present the theoretical basis and application of two types of cognitive maps, concept map and mind map, and explain how they can be used by educational researchers in engineering design research. Cognitive mapping techniques can be useful to researchers as they study students' problem solving strategies…

Co-ordinated research project on application of isotopic and nuclear techniques in the study of nutrition-pollution interactions and their impact on the nutritional status of human subjects in developing country populations. Report on the 2. research co-ordination meeting

International Nuclear Information System (INIS)

2004-01-01

The International Atomic Energy Agency (IAEA) is actively contributing through coordinated research project mechanisms to the development of isotopic techniques applicable for pollution-nutrition interactions. This CRP is based on the recommendations of a consultants' meeting on: 'Nuclear Analytical and Isotope Techniques for assessing nutrition-pollution interactions', NAHRES-62. The main objective of the CRP is to provide a scientific basis for better assessment of selected pollutants and nutrients in biological samples with a view to elucidate their interactions and the impact on human health. Results of this study will enhance the existing body of knowledge on nutrition-pollution interactions mechanisms and can be used to develop preventive strategies. SPECIFIC OBJECTIVES: Use of non-invasive specimens (e.g. breast milk, blood, hair, urine, placenta, eventually adipose tissue for organic pollutants) as indicators to monitor the interaction between the environmental pollution (both organic and inorganic) and nutritional status. Development of protocols to assess the health impact of environmental conditions on populations living under the risk of malnutrition. Validated procedures for chemical analysis in selected environment and nutritional specimens for research in the pollutant-nutrition interaction

Developing the soil moisture sensor using optical fiber technique (Joint research)

International Nuclear Information System (INIS)

Komatsu, Mitsuru; Nishigaki, Makoto; Seno, Shoji; Toida, Masaru; Hirata, Yoichi; Takenobu, Kazuyoshi; Tagishi, Hirotaka; Nakano, Katsushi; Kunimaru, Takanori; Maekawa, Keisuke; Yamamoto, Yoichi

2012-09-01

This research focused on methods of estimating the amounts of groundwater recharge, which are normally required as upper boundary conditions in groundwater flow analyses, based on measurements of infiltrating water in the ground, to systematize the methods and establish systems which are stable and measurable on site over a long time. Regarding developing measurement systems, fiber-optic strain measurement methods that enable multiple-point and long-distance measurement were used for measuring three quantities: suction pressure, soil moisture and volumetric water content rate obtained by applying water absorption swelling material, and each measurement was discussed. The results showed that the fiber-optic soil aquameter has two types of practical application: one for measuring suction pressure (Type I), and the other for measuring volumetric water content rate obtained by applying water absorption swelling material (Type III). Furthermore, by using measurement instruments in actual fields, the validity of the two methods for estimating the rainfall infiltration capacities of shallow-layer soils, that is, estimating the capacities either directly by measurements of soil water or from unsaturated hydraulic conductivities, was confirmed. (author)

The development and use of decision aiding techniques for establishing intervention levels

International Nuclear Information System (INIS)

Kelly, G.N.; Sinnaeve, J.

1989-01-01

Following the Chernobyl accident there has been considerable international discussion on the principles underlying the choice of intervention levels and their practical application. While there is broad agreement on the underlying principles - that is to put potentially exposed individuals into a better position in the sense that lower overall risks are achieved at reasonable cost in financial and social terms - the determination of what constitutes the most appropriate type and level of intervention in any particular circumstances is more complex. Within the CEC Radiation Protection Research Programme techniques are being developed to aid well founded and more transparent decisions on the choice of intervention levels. The techniques are described and areas identified where they might usefully be applied

Research and development of LANDSAT-based crop inventory techniques

Science.gov (United States)

Horvath, R.; Cicone, R. C.; Malila, W. A. (Principal Investigator)

1982-01-01

A wide spectrum of technology pertaining to the inventory of crops using LANDSAT without in situ training data is addressed. Methods considered include Bayesian based through-the-season methods, estimation technology based on analytical profile fitting methods, and expert-based computer aided methods. Although the research was conducted using U.S. data, the adaptation of the technology to the Southern Hemisphere, especially Argentina was considered.

Applied research on air pollution using nuclear-related analytical techniques. Report on the second research co-ordination meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-07-01

A co-ordinated research programme (CRP) on applied research on air pollution using nuclear-related techniques is a global CRP which started in 1992, and is scheduled to run until early 1997. The purpose of this CRP is to promote the use of nuclear analytical techniques in air pollution studies, e.g. NAA, XRF, and PIXE for the analysis of toxic and other trace elements in air particulate matter. The main purposes of the core programme are i) to support the use of nuclear and nuclear-related analytical techniques for research and monitoring studies on air pollution, ii) to identify major sources of air pollution affecting each of the participating countries with particular reference to toxic heavy metals, and iii) to obtain comparative data on pollution levels in areas of high pollution (e.g. a city centre or a populated area downwind of a large pollution source) and low pollution (e.g. rural area). This document reports the discussions held during the second Research Co-ordination Meeting (RCM) for the CRP which took place at ANSTO in Menai, Australia. (author)

Applied research on air pollution using nuclear-related analytical techniques. Report on the second research co-ordination meeting

International Nuclear Information System (INIS)

1995-01-01

A co-ordinated research programme (CRP) on applied research on air pollution using nuclear-related techniques is a global CRP which started in 1992, and is scheduled to run until early 1997. The purpose of this CRP is to promote the use of nuclear analytical techniques in air pollution studies, e.g. NAA, XRF, and PIXE for the analysis of toxic and other trace elements in air particulate matter. The main purposes of the core programme are i) to support the use of nuclear and nuclear-related analytical techniques for research and monitoring studies on air pollution, ii) to identify major sources of air pollution affecting each of the participating countries with particular reference to toxic heavy metals, and iii) to obtain comparative data on pollution levels in areas of high pollution (e.g. a city centre or a populated area downwind of a large pollution source) and low pollution (e.g. rural area). This document reports the discussions held during the second Research Co-ordination Meeting (RCM) for the CRP which took place at ANSTO in Menai, Australia. (author)

The IGISOL technique : three decades of developments

NARCIS (Netherlands)

Moore, I.D.; Dendooven, Peter; Ärje, J.

The Ion Guide Isotope SeparatorOn-Line (IGISOL) technique, conceived in the early 1980s as a novel variation to the helium-jet method, has been used to provide radioactive ion beams of short-lived exotic nuclei for fundamental nuclear structure research and applications for three decades. This

Facility and application of nuclear and supplementary analytical techniques at Dalat Nuclear Research Institute

International Nuclear Information System (INIS)

Nguyen Mong Sinh; Ho Manh Dung; Nguyen Thanh Binh

2006-01-01

The main applications of the nuclear and supplementary analytical techniques (N and SATs) in the Dalat Nuclear Research Institute (DNRI) and the facilities for the techniques are presented. The NATs in DNRI include the neutron activation analysis (NAA) with instrumental, radiochemical and prompt gamma methods (INAA, RNAA, PGNAA), the X-ray fluorescence analysis (XRFA) and the low-level counting and spectrometry. The sample irradiation sites for NAA, the automatic and manual pneumatic transfer systems, were installed at channels 7-1 and 13-2 and rotary rack on the Dalat research reactor. An ORTEC automatic sample changer (model ASC2) for γ-ray counting was equipped. A computer software for NAA based on the k 0 -standardization method for calculation of elemental concentration was developed. The low-level counting and spectrometry techniques have been setup. The devices required for sampling, sample preparation and data processing have also been equipped. The applications of N and SATs for determination of elemental composition, particularly important in providing data so-called trace elements, radionuclides and multi-element have been enlarged for objects of geology, archaeology, bio-agriculture, health-nutrition and environment. The implementation a quality system for N and SATs has been planned and initiated. (author)

First research coordination meeting for the coordinated research programme on the use of isotope techniques in investigating acidic fluids in geothermal exploitation. Report

International Nuclear Information System (INIS)

Gerardo-Abaya, J.

1998-02-01

Geothermal exploration and development for electrical and non-electrical applications is taking place in more than 36 countries worldwide. Although the technology has fully emerged, there are still hindrances to the full exploitation of the available heat. Most of the high temperature geothermal areas are situated in volcanic environments that produce acidic fluids which are corrosive for wells, as well as pipelines. Incidental drilling in those areas, for lack of better data, cause high economic losses ar a cost of about US D 2 million per well. In addition, a potential natural resource for electricity remains untapped. In realization of the problems associated with with geothermal exploitation and the potential role that isotope techniques could provide for a greater understanding of the complex behavior of geothermal systems, particularly those affected by acidic fluids, the Coordinated Research Programme (CRP) on the Use of Isotope Techniques in Problems Associated with Geothermal Exploitation is implemented in 1997-2000. An understanding of the phenomena will assist the scientific community involved in geothermal development. The information generated from the scientific investigations will be an input to management of the resource as well as to decision-making for monitoring and development of geothermal areas. The First Research Coordination Meeting for this CRP was held on 21-23 October 1997 in the IAEA Headquarters, Vienna, Austria. The results of the current investigations relating to acid fluids in the various geothermal systems were presented by the participants. The report provides the hydrological concept on which research on acid fluids is based. The report includes also the summaries of the researches under the CRP as well as the agreed actions for follow-up work

Stochastic Feedforward Control Technique

Science.gov (United States)

Halyo, Nesim

1990-01-01

Class of commanded trajectories modeled as stochastic process. Advanced Transport Operating Systems (ATOPS) research and development program conducted by NASA Langley Research Center aimed at developing capabilities for increases in capacities of airports, safe and accurate flight in adverse weather conditions including shear, winds, avoidance of wake vortexes, and reduced consumption of fuel. Advances in techniques for design of modern controls and increased capabilities of digital flight computers coupled with accurate guidance information from Microwave Landing System (MLS). Stochastic feedforward control technique developed within context of ATOPS program.

Comprehensive research concerning the development of effective utilizing techniques of biological resources (large scale research out of the framework). Seibutsu shigen no koritsuteki riyo gijutsu no kaihatsu ni kansuru sogo kenkyu (ogata betsuwaku kenkyu)

Energy Technology Data Exchange (ETDEWEB)

1991-10-25

This paper is a research report in which the cultivated production of forest resources, the development to useful substances and the systematization to take the root in a region were studied. The distribution maps of biological resources on respective woodland systems: that is, the nationwide distribution maps of the amount of resources in Japan as to the broadleaf trees in private forests and national forests, the available amount and kinds of tree were prepared. As for the establishment of cultivation technique of the super-short deforestation forest, that is, pursue of wooden growth to the maximum limit, the superior clone 26 system was selected from the willow group through the research of wooden cultivation and the clone which showed the maximum yield reached 24t/ha every year. As for the material preparation technique due to microbial enzymes, that is, the creation and breeding of fungi which have the high lignin decomposition power, a stock of fungi which has the high lignin decomposition power and the decomposition selectivity was created by the cell fusion and the UV (ultraviolet ray) radiation treatment. As for the use of effective components in wooden resources, many useful characteristics could be detected by applying the boiling, bursting and ozone treatment. As for the mushroom cultivation through the application of unused tree kinds, a new kind of mushroom for food service was selected to clarify the possibility of fruit body formation. The development of a new material from conifers is promising. 1 tab.

FY 1984 annual report on the research and development of automatic sewing systems. System management/control techniques; 1984 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. System kanri seigyo gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1985-03-01

The automatic sewing system technique research association has been commissioned by the Agency of Industrial Science and Technology for (research and development of automatic sewing systems). This program covers R and D of the elementary techniques for total systems and sewing preparation/processing, sewing/assembling, cloth handling, and system management/control. This report describes the results of the R and D efforts for the system management/control techniques. The FY 1984 efforts are directed to the basic designs for optimizing process configurations, load balances, and control of sewing/assembling devices, transfer devices and the like using a computer for controlling purposes, based on the production schedules in which demand forecasts by apparel makers are reflected, in order to reduce lead time from charging cloth into an automatic sewing plant to delivery of the products by at least 50% from the current level by improving processing efficiency and speed. The plan for development of the examination/failure diagnosis method, as the next R and D theme, is drawn mainly for determining positions of product quality standard setting-up, examination of individual steps and failure diagnosis functions of sewing machines, classification of the failure levels, and prediction of failure. Prospects of establishing an automatic system for visual recognition are obtained. (NEDO)

Understanding the Information Research Process of Experienced Online Information Researchers to Inform Development of a Scholars Portal

Directory of Open Access Journals (Sweden)

Martha Whitehead

2009-06-01

Full Text Available Objective - The main purpose of this study was to understand the information research process of experienced online information researchers in a variety of disciplines, gather their ideas for improvement and as part of this to validate a proposed research framework for use in future development of Ontario’s Scholars Portal.Methods - This was a qualitative research study in which sixty experienced online information researchers participated in face-to-face workshops that included a collaborative design component. The sessions were conducted and recorded by usability specialists who subsequently analyzed the data and identified patterns and themes.Results - Key themes included the similarities of the information research process across all disciplines, the impact of interdisciplinarity, the social aspect of research and opportunities for process improvement. There were many specific observations regarding current and ideal processes. Implications for portal development and further research included: supporting a common process while accommodating user-defined differences; supporting citation chaining practices with new opportunities for data linkage and granularity; enhancing keyword searching with various types of intervention; exploring trusted social networks; exploring new mental models for data manipulation while retaining traditional objects; improving citation and document management. Conclusion – The majority of researchers in the study had almost no routine in their information research processes, had developed few techniques to assist themselves and had very little awareness of the tools available to help them. There are many opportunities to aid researchers in the research process that can be explored when developing scholarly research portals. That development will be well guided by the framework ‘discover, gather, synthesize, create, share.’

Research on spatio-temporal database techniques for spatial information service

Science.gov (United States)

Zhao, Rong; Wang, Liang; Li, Yuxiang; Fan, Rongshuang; Liu, Ping; Li, Qingyuan

2007-06-01

Geographic data should be described by spatial, temporal and attribute components, but the spatio-temporal queries are difficult to be answered within current GIS. This paper describes research into the development and application of spatio-temporal data management system based upon GeoWindows GIS software platform which was developed by Chinese Academy of Surveying and Mapping (CASM). Faced the current and practical requirements of spatial information application, and based on existing GIS platform, one kind of spatio-temporal data model which integrates vector and grid data together was established firstly. Secondly, we solved out the key technique of building temporal data topology, successfully developed a suit of spatio-temporal database management system adopting object-oriented methods. The system provides the temporal data collection, data storage, data management and data display and query functions. Finally, as a case study, we explored the application of spatio-temporal data management system with the administrative region data of multi-history periods of China as the basic data. With all the efforts above, the GIS capacity of management and manipulation in aspect of time and attribute of GIS has been enhanced, and technical reference has been provided for the further development of temporal geographic information system (TGIS).

The development of human behavior analysis techniques

International Nuclear Information System (INIS)

Lee, Jung Woon; Lee, Yong Hee; Park, Geun Ok; Cheon, Se Woo; Suh, Sang Moon; Oh, In Suk; Lee, Hyun Chul; Park, Jae Chang.

1997-07-01

In this project, which is to study on man-machine interaction in Korean nuclear power plants, we developed SACOM (Simulation Analyzer with a Cognitive Operator Model), a tool for the assessment of task performance in the control rooms using software simulation, and also develop human error analysis and application techniques. SACOM was developed to assess operator's physical workload, workload in information navigation at VDU workstations, and cognitive workload in procedural tasks. We developed trip analysis system including a procedure based on man-machine interaction analysis system including a procedure based on man-machine interaction analysis and a classification system. We analyzed a total of 277 trips occurred from 1978 to 1994 to produce trip summary information, and for 79 cases induced by human errors time-lined man-machine interactions. The INSTEC, a database system of our analysis results, was developed. The MARSTEC, a multimedia authoring and representation system for trip information, was also developed, and techniques for human error detection in human factors experiments were established. (author). 121 refs., 38 tabs., 52 figs

The development of human behavior analysis techniques

Energy Technology Data Exchange (ETDEWEB)

Lee, Jung Woon; Lee, Yong Hee; Park, Geun Ok; Cheon, Se Woo; Suh, Sang Moon; Oh, In Suk; Lee, Hyun Chul; Park, Jae Chang

1997-07-01

In this project, which is to study on man-machine interaction in Korean nuclear power plants, we developed SACOM (Simulation Analyzer with a Cognitive Operator Model), a tool for the assessment of task performance in the control rooms using software simulation, and also develop human error analysis and application techniques. SACOM was developed to assess operator`s physical workload, workload in information navigation at VDU workstations, and cognitive workload in procedural tasks. We developed trip analysis system including a procedure based on man-machine interaction analysis system including a procedure based on man-machine interaction analysis and a classification system. We analyzed a total of 277 trips occurred from 1978 to 1994 to produce trip summary information, and for 79 cases induced by human errors time-lined man-machine interactions. The INSTEC, a database system of our analysis results, was developed. The MARSTEC, a multimedia authoring and representation system for trip information, was also developed, and techniques for human error detection in human factors experiments were established. (author). 121 refs., 38 tabs., 52 figs.

Measurement technique developments for LBE flows

Energy Technology Data Exchange (ETDEWEB)

Buchenau, D., E-mail: d.buchenau@fzd.de [Forschungszentrum Dresden-Rossendorf (FZD), 01314 Dresden (Germany); Eckert, S.; Gerbeth, G. [Forschungszentrum Dresden-Rossendorf (FZD), 01314 Dresden (Germany); Stieglitz, R. [Karlsruhe Institute of Technology (KIT), 76344 Eggenstein-Leopoldshafen (Germany); Dierckx, M. [SCK-CEN, Belgian Nuclear Research Centre, 2400 Mol (Belgium)

2011-08-31

We report on the development of measurement techniques for flows in lead-bismuth eutectic alloys (LBE). This paper covers the test results of newly developed contactless flow rate sensors as well as the development and test of the LIDAR technique for operational free surface level detection. The flow rate sensors are based on the flow-induced disturbance of an externally applied AC magnetic field which manifests itself by a modified amplitude or a modified phase of the AC field. Another concept of a force-free contactless flow meter uses a single cylindrical permanent magnet. The electromagnetic torque on the magnet caused by the liquid metal flow sets the magnet into rotation. The operation of those sensors has been demonstrated at liquid metal test loops for which comparative flow rate measurements are available, as well as at the LBE loops THESYS at KIT and WEBEXPIR at SCK-CEN. For the level detection a commercial LIDAR system was successfully tested at the WEBEXPIR facility in Mol and the THEADES loop in Karlsruhe.

Fundamentals and techniques of nonimaging optics research

Science.gov (United States)

Winston, R.; Ogallagher, J.

1987-07-01

Nonimaging Optics differs from conventional approaches in its relaxation of unnecessary constraints on energy transport imposed by the traditional methods for optimizing image formation and its use of more broadly based analytical techniques such as phase space representations of energy flow, radiative transfer analysis, thermodynamic arguments, etc. Based on these means, techniques for designing optical elements which approach and in some cases attain the maximum concentration permitted by the Second Law of Thermodynamics were developed. The most widely known of these devices are the family of Compound Parabolic Concentrators (CPC's) and their variants and the so called Flow-Line or trumpet concentrator derived from the geometric vector flux formalism developed under this program. Applications of these and other such ideal or near-ideal devices permits increases of typically a factor of four (though in some cases as much as an order of magnitude) in the concentration above that possible with conventional means. Present efforts can be classed into two main areas: (1) classical geometrical nonimaging optics, and (2) logical extensions of nonimaging concepts to the physical optics domain.

(Experimental development, testing and research work in support of the inertial confinement fusion program)

Energy Technology Data Exchange (ETDEWEB)

Drake, D.J.; Luckhardt, R.; Moyer, S.; Armentrout, C.J.; Downs, R.L.; Moncur, K. (eds.)

1990-02-28

This report discusses: Cryogenic technology; polymer shell fabrication; glass shell fabrication and characterization; coating technology; development of characterization techniques; laser technology; and plasma research and instrumentation.

Application of infrared technique in research of mechanical properties

International Nuclear Information System (INIS)

Huang, Y.; Shih, C.H.

1985-08-01

The infrared technique as a new method is more useful for research of materials science. This paper simply describes the techniques of infrared temperature measurement and thermography and provides the experimental data of some metals and alloys during the deformation and the fatigue process by use of the infrared sensing method. It is shown that the conventional tensile data can be correlated with infrared radiational energy change during the tensile pulling. The temperature field of metal during elastic-plastic deformation can be calculated by finite element analysis, and the thermoelastic effect of metal can be shown by thermography. The infrared technique can be used to predict the fatigue damage, monitor their propagations and give the alarm at fracture. Finally, it must be pointed out that the irreversibility of infrared emission of metal can be used as a basis of nondestructive testing. (author)

FY 1983 annual report on the research and development of automatic sewing systems. System management/control techniques; 1983 nendo jido hosei system no kenkyu kaihatsu seika hokokusho. System kanri seigyo gijutsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1984-03-01

The automatic sewing system technique research association has been commissioned by the Agency of Industrial Science and Technology for (research and development of automatic sewing systems). This program covers R and D of the elementary techniques for total systems and sewing preparation/processing, sewing/assembling, cloth handling, and system management/control. This report describes the results of the R and D efforts for the system management/control techniques. The program for the system management/control techniques involves, first of all, the basic designs for the overall system management, centered by the optimum process configuration and control for reducing lead time of an automatic sewing plant by at least 50% from the current level, based on the production schedules of an apparel maker. The basic designs are then extended to cover examination of defective products at each step, examination and failure diagnosis for prediction, detection and exchange of failed machine parts, systemisation of necessary information to be provided for automatic operation of a sewing plant and providing control-related information, including selection of information media, and information recognition by processing images of cloth and surface conditions/shapes of machine parts. (NEDO)

The development of advanced instrumentation and control technology -The development of digital monitoring technique-

Energy Technology Data Exchange (ETDEWEB)

Jun, Jong Sun; Lee, Byung Sun; Han, Sang Joon; Shin, Yong Chul; Kim, Yung Baek; Kim, Dong Hoon; Oh, Yang Kyoon; Suh, Yung; Choi, Chan Duk; Kang, Byung Hun; Hong, Hyung Pyo; Shin, Jee Tae; Moon, Kwon Kee; Lee, Soon Sung; Kim, Sung Hoh; Koo, In Soo; Kim, Dong Wan; Huh, Sub [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1995-07-01

A study has been performed for the advanced DSP technology for digital nuclear I and C systems and its prototype, and for the monitoring and diagnosing techniques for the highly-pressurized components in NSSS. In the DSP part, the DSP requirements for NPPs have been induced for the performance of the DSP systems and the functional analysis for Reactor Coolant System (RCS) has been performed as the embodied target system. Total quantities of the I and C signals, signal types, and signal functions were also investigated in Ulchin NPP units 3 and 4. From these basis, the prototype facility was configured for performance validation and algorithm implementation. In order to develop the methods of DSP techniques and algorithms, the current signal validation methods have been studied and analyzed. In the analysis for the communication networks in NPP, the basic technique for the configuration of communication networks and the important considerations for applying to NPPs have been reviewed. Test and experimental facilities have been set up in order to carry out the required tests during research activities on the monitoring techniques for abnormal conditions. Studies were concentrated on methods how to acquire vibration signals from the mechanical structures and equipment including rotating machinery and reactor, and analyses for the characteristics of the signals. Fuzzy logic was evaluated as a good technique to improve the reliability of the monitoring and diagnosing algorithm through the application of the theory such as the automatic pattern recognition algorithm of the vibration spectrum, the alarm detection and diagnosis for collisions of loose parts. 71 figs, 32 tabs, 64 refs. (Author).

The development of advanced instrumentation and control technology -The development of digital monitoring technique-

International Nuclear Information System (INIS)

Jun, Jong Sun; Lee, Byung Sun; Han, Sang Joon; Shin, Yong Chul; Kim, Yung Baek; Kim, Dong Hoon; Oh, Yang Kyoon; Suh, Yung; Choi, Chan Duk; Kang, Byung Hun; Hong, Hyung Pyo; Shin, Jee Tae; Moon, Kwon Kee; Lee, Soon Sung; Kim, Sung Hoh; Koo, In Soo; Kim, Dong Wan; Huh, Sub

1995-07-01

A study has been performed for the advanced DSP technology for digital nuclear I and C systems and its prototype, and for the monitoring and diagnosing techniques for the highly-pressurized components in NSSS. In the DSP part, the DSP requirements for NPPs have been induced for the performance of the DSP systems and the functional analysis for Reactor Coolant System (RCS) has been performed as the embodied target system. Total quantities of the I and C signals, signal types, and signal functions were also investigated in Ulchin NPP units 3 and 4. From these basis, the prototype facility was configured for performance validation and algorithm implementation. In order to develop the methods of DSP techniques and algorithms, the current signal validation methods have been studied and analyzed. In the analysis for the communication networks in NPP, the basic technique for the configuration of communication networks and the important considerations for applying to NPPs have been reviewed. Test and experimental facilities have been set up in order to carry out the required tests during research activities on the monitoring techniques for abnormal conditions. Studies were concentrated on methods how to acquire vibration signals from the mechanical structures and equipment including rotating machinery and reactor, and analyses for the characteristics of the signals. Fuzzy logic was evaluated as a good technique to improve the reliability of the monitoring and diagnosing algorithm through the application of the theory such as the automatic pattern recognition algorithm of the vibration spectrum, the alarm detection and diagnosis for collisions of loose parts. 71 figs, 32 tabs, 64 refs. (Author)

California Energy Commission Public Interest EnergyResearch/Energy System Integration -- Transmission-Planning Research&Development Scoping Project

Energy Technology Data Exchange (ETDEWEB)

Eto, Joseph H.; Lesieutre, Bernard; Widergren, Steven

2004-07-01

The objective of this Public Interest Energy Research (PIER)scoping project is to identify options for public-interest research and development (R&D) to improve transmission-planning tools, techniques, and methods. The information presented was gathered through a review of current California utility, California Independent System Operator (ISO), and related western states electricity transmission-planning activities and emerging needs. This report presents the project teams findings organized under six topic areas and identifies 17 distinct R&D activities to improve transmission-planning in California and the West. The findings in this report are intended for use, along with other materials, by PIER staff, to facilitate discussions with stakeholders that will ultimately lead to development of a portfolio of transmission-planning R&D activities for the PIER program.

Safeguards technology research and development at CIAE

International Nuclear Information System (INIS)

Yang Qun

2001-01-01

Full text: China Institute of Atomic Energy (CIAE) is a multi-disciplinary institute under the leadership of China National Nuclear Corporation (CNNC). The Laboratory of Technical Research for Nuclear Safeguards was established at CIAE in 1991 to develop safeguards technology and to provide technical assistance to competent authorities for nuclear material management and control, which became one of the key laboratories approved by CNNC in 1993. The main research works for safeguards at CIAE include: nuclear material control and accounting, facilities license review and assessment, domestic inspection, NDA and DA analysis, physical protection and technical training. Research and development of equipment and technique for safeguards has been continuing at CIAE. A variety of NDA equipment that has different resolution and analysis capability has been developed. Method of NDA measurement has been investigated for nuclear material with different characteristics. Mathematics method such as Monte Carlo simulation is applied in NDA. Advanced destructive analysis (DA) instrument is installed at laboratory of CIAE, such as TIMS, ICP-MS and electronic chemistry analyzing system. The high accuracy results of element analysis and isotopic analysis for nuclear material can be obtained. It is possible to measure the types and quantities of nuclear material in a given area by means of NDA and DA. Physical protection system has also been developed. It consists of access control and management, various alarm (including perimeter alarm, intrusion alarms, fire alarms), video and audio monitors, intercommunication set and central console. The system can meet technical requirement for safeguards of first rank. Nuclear material accounting is an important aspect of safeguards research at CIAE. The computer software related to material accounting has been developed. It is the important task for scientists at CIAE to design and review nuclear accounting systems in various facilities. For

Co-ordinated research project on comparative international studies of osteoporosis using isotope techniques. Report on the final research co-ordination meeting

International Nuclear Information System (INIS)

2002-01-01

In 1994, the International Atomic Energy Agency started the five-year Co-ordinated Research Project (CRP) on Comparative International Studies of Osteoporosis Using Isotope Techniques. The objectives of this study were: To harmonize the techniques of measuring BMD within the participating countries and to obtain data that can be compared between the different study groups (countries); To determine whether early adult PBM varies between populations over the age range from 15 to 50 years. In other words, to determine the age of peak bone mass in selected populations from developing countries; To explore environmental and nutritional contributions to any determined differences. Further information about the purpose and scope of the CRP may be found in the report of the Advisory Group Meeting (AGM) held in 19921 and other reports of this CRP. The fourth Research Co-ordination Meeting (RCM) for participants of the CRP, which is the subject of the present report, was held at the University of Sheffield Medical School; WHO Collaborating Center for Metabolic Bone Diseases in Sheffield, UK from 28 Feb. to 3 March 2000

Combating echinococcosis in China: strengthening the research and development.

Science.gov (United States)

Qian, Men-Bao; Abela-Ridder, Bernadette; Wu, Wei-Ping; Zhou, Xiao-Nong

2017-11-21

Echinococcosis is a neglected zoonotic disease, causing great morbidity and mortality due to the wide distribution of its endemic areas. China holds a high percentage in the global burden of both cystic and alveolar echinococcosis. A national survey conducted between 2012 and 2016 showed that an estimated 50 million people are at risk of contracting the disease in western China, of whom about 0.17 million are cases with echinococcosis.Despite this, research and development on echinococcosis in China is greatly inadequate compared to that in other countries. In this paper, we argue that there is a need for more research and work to be conducted in China on echinococcosis, including researching techniques in regards to diagnosis, treatment, and vaccination, and developing products through technical transformation and piloting strategies to control and even elimination.However, great opportunities exist for China to strengthen the research and development on this disease through initiatives such as Health China 2030, the Belt and Road Initiative, the China-Africa cooperation, as well as through further cooperation between China and the World Health Organization. All of these can bring us closer to controlling echinococcosis in China as well as in other countries. One element of crucial importance will be the training and development of professionals, which can be strengthened through international cooperation.

Low cost MATLAB-based pulse oximeter for deployment in research and development applications.

Science.gov (United States)

Shokouhian, M; Morling, R C S; Kale, I

2013-01-01

Problems such as motion artifact and effects of ambient lights have forced developers to design different signal processing techniques and algorithms to increase the reliability and accuracy of the conventional pulse oximeter device. To evaluate the robustness of these techniques, they are applied either to recorded data or are implemented on chip to be applied to real-time data. Recorded data is the most common method of evaluating however it is not as reliable as real-time measurements. On the other hand, hardware implementation can be both expensive and time consuming. This paper presents a low cost MATLAB-based pulse oximeter that can be used for rapid evaluation of newly developed signal processing techniques and algorithms. Flexibility to apply different signal processing techniques, providing both processed and unprocessed data along with low implementation cost are the important features of this design which makes it ideal for research and development purposes, as well as commercial, hospital and healthcare application.

The outline of the research and development EM-ACROSS in Tono area

International Nuclear Information System (INIS)

Nakajima, Takahiro; Kunitomo, Takahiro; Kumazawa, Mineo; Nagao, Hiromichi

2010-07-01

ACROSS (Accurately Controlled Routinely Operated Signal System) has developed to acquire the detailed information on the tectonically active zone. The technology for example the transmission and receiving technique, the data analysis and the interpretation technique of the ACROSS signal is able to apply not only to seismology but also to other field. We considered the ACROSS technology may apply to the engineering technology of the Mizunami Underground Research Laboratory (MIU) project, for example monitoring of the change of the geological environment around shafts and also the strength of the shaft concrete itself. It is planned that the examination for three years will be made from fiscal year 2007, and the new observation site around the MIU was established, and the data acquisition and data analysis have been carried out. This report compiled technical matters among the results obtained in the research and the development of the EM-ACROSS. (author)

Develop and implement preconditioning techniques to control face ejection rockbursts for safer mining in seismically hazardous areas

CSIR Research Space (South Africa)

Toper, AZ

1998-01-01

Full Text Available This research report discusses the development of preconditioning techniques to control face bursts, for safer mining in seismically hazardous areas. Preconditioning involves regularly setting off carefully tailored blasts in the fractured rock...

Development of feed supplementation strategies for improving ruminant productivity on small-holder farms in Latin America through the use of immunoassay techniques. Proceedings of the final research co-ordination meeting of a co-ordinated research programme

International Nuclear Information System (INIS)

1996-05-01

The result of a CRP completed in 1989 and entitled ''Regional Network for Improving the Reproductive Management of Milk, Meat and Fibre Producing Livestock with the Use of Radioimmunoassay Techniques'' clearly indicated that nutritional inadequacies and livestock management deficiencies were the major factors affecting livestock productivity in Latin America. Based on these conclusions a CRP entitled ''Development of Feed Supplementation Strategies for Improving Ruminant Productivity on Small-holder Farms in Latin America through the Use of Immunoassay Techniques'' was initiated late in the same year. The primary aim of the Programme was to improve the productivity of indigenous ruminant livestock species maintained on typical small-holder farms in the region. Central to the approach was to first identify the nutritional and management constraints which affect reproductive and productive efficiency, and subsequently to devise and test corrective measures which would be practical, sustainable and economically viable. Important related goals of the Programme were to enhance the level of expertise and the educational quality within animal production research institutes in the region, to encourage close contact between scientists and institutions in developing and developed countries and to promote scientific information exchange on a regional basis. Refs, figs, tabs

Development of feed supplementation strategies for improving ruminant productivity on small-holder farms in Latin America through the use of immunoassay techniques. Proceedings of the final research co-ordination meeting of a co-ordinated research programme

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-05-01

The result of a CRP completed in 1989 and entitled ``Regional Network for Improving the Reproductive Management of Milk, Meat and Fibre Producing Livestock with the Use of Radioimmunoassay Techniques`` clearly indicated that nutritional inadequacies and livestock management deficiencies were the major factors affecting livestock productivity in Latin America. Based on these conclusions a CRP entitled ``Development of Feed Supplementation Strategies for Improving Ruminant Productivity on Small-holder Farms in Latin America through the Use of Immunoassay Techniques`` was initiated late in the same year. The primary aim of the Programme was to improve the productivity of indigenous ruminant livestock species maintained on typical small-holder farms in the region. Central to the approach was to first identify the nutritional and management constraints which affect reproductive and productive efficiency, and subsequently to devise and test corrective measures which would be practical, sustainable and economically viable. Important related goals of the Programme were to enhance the level of expertise and the educational quality within animal production research institutes in the region, to encourage close contact between scientists and institutions in developing and developed countries and to promote scientific information exchange on a regional basis. Refs, figs, tabs.

Research and development of the industrial basic technologies of the next generation, 'composite materials (metal-based)'. Evaluation of the first phase research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'fukugo zairyo (kinzokukei)'. Daiikki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1983-03-31

The results of the first phase research and development project for developing the metal-based composite materials as the basic technologies of the next generation are evaluated. For development of highly functional materials, the efforts are directed to understanding the basic characteristics regarding wettability and reactivity of PAN-based carbon fibers and PCS-based silicon carbide fibers with metals, in which aluminum-based matrices are considered; preliminary tests for various composting methods; and development of wire preforms as the intermediate materials. Bright prospects have been obtained for improving problems involved in each technique. For development of molding/processing techniques, basic researches have been conducted for hot pressing/rolling, extrusion/withdrawal, powder molding and melt molding, using various reinforcing fibers. Bright prospects have been also obtained for combinations of adequate molding processes for individual materials. For development of design techniques, the basic data regarding mechanical characteristics of FRMs, both domestic and foreign, are collected, and analyzed by the trace tests with specimens, to set up the targets for FRM function improvements, viewed from the designs. (NEDO)

Co-ordinated research project on application of nuclear techniques in the prevention of degenerative diseases (obesity and non-insulin dependent diabetes) in ageing

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

In the developed countries, research using nuclear methods has been substantially used to examine the physiological and biochemical mechanisms involved in obesity-related diseases. This Co-ordinated Research Project (CRP) is intended to promote the use of these techniques in the developing world. The specific objectives of this CRP are: 1. To define the magnitude of the obesity/NIDDM problem in developing countries. 2. To identify vulnerable groups at high risk. 3. To describe the metabolic mechanisms involved. The purpose of this first Research Co-ordination Meeting (RCM) was thus to develop a worldwide collaboration in the use of nuclear and isotopic techniques to investigate the aetiology of degenerative diseases in ageing. All countries participating in this CRP are going through the epidemiological transition with changes in lifestyles to approach those seen in the developed nations. This first meeting was held in the Agency's headquarters in Vienna, with participation of contract and agreement holders, experts, observer, and in-house staff.

Co-ordinated research project on application of nuclear techniques in the prevention of degenerative diseases (obesity and non-insulin dependent diabetes) in ageing

International Nuclear Information System (INIS)

1999-01-01

In the developed countries, research using nuclear methods has been substantially used to examine the physiological and biochemical mechanisms involved in obesity-related diseases. This Co-ordinated Research Project (CRP) is intended to promote the use of these techniques in the developing world. The specific objectives of this CRP are: 1. To define the magnitude of the obesity/NIDDM problem in developing countries. 2. To identify vulnerable groups at high risk. 3. To describe the metabolic mechanisms involved. The purpose of this first Research Co-ordination Meeting (RCM) was thus to develop a worldwide collaboration in the use of nuclear and isotopic techniques to investigate the aetiology of degenerative diseases in ageing. All countries participating in this CRP are going through the epidemiological transition with changes in lifestyles to approach those seen in the developed nations. This first meeting was held in the Agency's headquarters in Vienna, with participation of contract and agreement holders, experts, observer, and in-house staff

Transcriptomics in cancer diagnostics: developments in technology, clinical research and commercialization.

Science.gov (United States)

Sager, Monica; Yeat, Nai Chien; Pajaro-Van der Stadt, Stefan; Lin, Charlotte; Ren, Qiuyin; Lin, Jimmy

2015-01-01

Transcriptomic technologies are evolving to diagnose cancer earlier and more accurately to provide greater predictive and prognostic utility to oncologists and patients. Digital techniques such as RNA sequencing are replacing still-imaging techniques to provide more detailed analysis of the transcriptome and aberrant expression that causes oncogenesis, while companion diagnostics are developing to determine the likely effectiveness of targeted treatments. This article examines recent advancements in molecular profiling research and technology as applied to cancer diagnosis, clinical applications and predictions for the future of personalized medicine in oncology.

Nuclear techniques for food and agricultural development: 1964-94

International Nuclear Information System (INIS)

Sigurbjoernsson, B.; Vose, P.

1994-01-01

Over the past 30 years, programmes of the Joint FAO/IAEA Division have helped countries solve practical, and costly, problems in areas of soil fertility, irrigation, and crop production; plant breeding and genetics; animal production and health; insect and pest control; agrochemicals and residues; and food preservation. The Division's overall objectives are to exploit the potential for application of isotopes and radiation techniques in agricultural research and development; to increase and stabilize agricultural production; to reduce production costs; to improve the quality of food; to protect agricultural products from spoilage and losses; and to minimize pollution of food and the agricultural environment. On the occasion of the Joint Division's 30th anniversary year, this article highlights selected achievements over the past three decades

Research and development of the industrial basic technologies of the next generation, 'composite materials (fine ceramics)'. Evaluation of the first phase research and development; Jisedai sangyo kiban gijutsu kenkyu kaihatsu 'fine ceramics'. Daiikki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1984-03-30

The results of the first phase research and development project for developing fine ceramics as the basic technologies of the next generation are evaluated. The R and D themes are selected to develop fine ceramics of high strength, corrosion resistance, precision and wear resistance, noting their excellent characteristics. Development of the basic techniques for these materials is of high significance, and highly rated. The efforts in the first-phase R and D project are aimed at development of silicon nitride and silicon carbide for synthesis of the stock materials; explosive forming/treating the stock powders; forming, sintering and processing/joining; evaluation of the characteristics; non-destructive testing methods; designs; and evaluation of the parts, among others, as the elementary techniques for production, evaluation and application of the fine ceramic materials. The technical targets of improving functions have been achieved, or bright prospects have been obtained therefor in development of the techniques for synthesis of the stock materials, forming/sintering and processing/joining. The silica reduction for stock synthesis, basic techniques for molding/sintering, and rheological considerations for the molding/sintering techniques represent the techniques of the next generation, because they break through the limitations of the conventional techniques. (NEDO)

McDonnell Douglas Helicopter Company independent research and development: Preparing for the future

Science.gov (United States)

Haggerty, Allen C.

1988-01-01

During the 1970's and 80's, research has produced the technology that is seen in aircraft such as the LHX and future models. The technology is discussed that is reaching maturity and moving into the application stage of future programs. Technology is discussed in six major areas: advanced concepts, analysis techniques, structures, systems, simulation, and research and development facilities. The partnership of McDonnell Douglas Helicopter Co. and the government in developing these technologies is illustrated in several programs.

Study on Production of Useful Metabolites by Development of Advanced Cell Culture Techniques Using Radiation

Energy Technology Data Exchange (ETDEWEB)

Chung, Byung Yeoup; Kim, J. H.; Lee, S. S.; Shyamkumar, B.; An, B. C.; Moon, Y. R.; Lee, E. M.; Lee, M. H.

2009-02-15

The purpose of this project is improvement of investigation, materialization and evaluation techniques on effectiveness for functional natural compounds throughout development of tissue/cell culture techniques for mass production of useful metabolites using radiation. Research scope includes 1) Development of a technique for radiation tissue and cell culture, 2) Database construction for radiation response in plants and radiation effects, 3) Construction of general-purpose national based techniques of cell culture technique using radiation. Main results are as follow: Establishment of a tissue culture system (Rubus sp., Lithospermum erythrorhizon, and Rhodiola rosea); characterization of radiation activated gene expression from cultivated bokbunja (Rubus sp.) and Synechocystis sp., identification of gamma-ray induced color change in plants; identification of sensitivity to gamma-ray from Omija (Schisandra chinensis) extract; identification of the response of thylakoid proteins to gamma-ray in spinach and Arabidopsis; identification of gamma-ray induced gene relating to pigment metabolism; characterization of different NPQ changes to gamma-irradiated plants; verification of the effects of rare earth element including anti-bacterial and anti-fungal properties and as a growth enhancer; identification of changes in the growth of gamma-irradiated Synechocystis; and investigation of liquid cell culture conditions from Rhodiola rosea

Study on Production of Useful Metabolites by Development of Advanced Cell Culture Techniques Using Radiation

International Nuclear Information System (INIS)

Chung, Byung Yeoup; Kim, J. H.; Lee, S. S.; Shyamkumar, B.; An, B. C.; Moon, Y. R.; Lee, E. M.; Lee, M. H.

2009-02-01

The purpose of this project is improvement of investigation, materialization and evaluation techniques on effectiveness for functional natural compounds throughout development of tissue/cell culture techniques for mass production of useful metabolites using radiation. Research scope includes 1) Development of a technique for radiation tissue and cell culture, 2) Database construction for radiation response in plants and radiation effects, 3) Construction of general-purpose national based techniques of cell culture technique using radiation. Main results are as follow: Establishment of a tissue culture system (Rubus sp., Lithospermum erythrorhizon, and Rhodiola rosea); characterization of radiation activated gene expression from cultivated bokbunja (Rubus sp.) and Synechocystis sp., identification of gamma-ray induced color change in plants; identification of sensitivity to gamma-ray from Omija (Schisandra chinensis) extract; identification of the response of thylakoid proteins to gamma-ray in spinach and Arabidopsis; identification of gamma-ray induced gene relating to pigment metabolism; characterization of different NPQ changes to gamma-irradiated plants; verification of the effects of rare earth element including anti-bacterial and anti-fungal properties and as a growth enhancer; identification of changes in the growth of gamma-irradiated Synechocystis; and investigation of liquid cell culture conditions from Rhodiola rosea

State of the art and tendencies of development of factographic information systems in nuclear research and nuclear technology

International Nuclear Information System (INIS)

Jankowski, L.

1983-01-01

Factographic information systems for nuclear research and nuclear technology have become important preconditions of research and development process intensification in the CMEA member countries. Their consistent development and transformation into logical information systems calls for a new approach to the problems of computer technique and program development

Bridging the gap between research and practice: The development of a digital library of research syntheses.

Science.gov (United States)

Barroso, Julie; Edlin, April; Sandelowski, Margarete; Lambe, Camille

2006-01-01

This article describes the development of a digital library as a resource for clinicians and researchers working with women with HIV infection. We wanted to find a new way of communicating the findings from the 114 studies that we used as the method case. The development of the SandBar Digital Library (http://sonweb.unc.edu/sandbar), a product of a 5-year project to develop the analytic techniques for qualitative metasynthesis, is described from its inception, including analyses of the potential users and how they might use such a resource. The Digital Library evolved over a 3-year period, with continuous feedback from a group of researchers and clinicians who are also experts in the care of HIV-positive people. It provides a concise and comprehensive compilation of findings in two major areas of concern for the seropositive women who were the participants in the studies: motherhood and stigma.

Study on production of useful metabolites by development of advanced cell culture techniques using radiation

Energy Technology Data Exchange (ETDEWEB)

Chung, Byung Yeoup; Kim, Jinhong; Lee, Seung Sik; Bai, Hyounwoo; An, Byung Chull; Lee, Eun Mi; Lee, Jae Taek; Kim, Mi Ja

2010-12-15

The purpose of this project is improvement of investigation, materialization and evaluation techniques on effectiveness for functional natural compounds throughout development of tissue/cell culture techniques for mass production of useful metabolites using radiation. Research scope includes Development of a technique for radiation tissue and cell culture, Database construction for radiation response in plants and radiation effects, Construction of general-purpose national based techniques of cell culture technique using radiation. Main results are as follow: Isolation and identification of radiation induced basI gene; Determination of stresses sensitivities by transformating basI gene into arabidopsis; Isolation and identification of radiation induced chaperon proteins (PaAhpC and yPrxII) from Pseudomonas and yeast, and structural and functional analysis of the proteins; Determination of oxidative and heat resistance by transformating PaAhpC; Isolation and identification of maysin and its derivatives from centipedgrass; Investigation of enhancement technique for improving maysin and its derivatives production using radiation; Investigation of removing undesirable color in maysin and its derivatives using radiation; Determination of the effect of radiation on physiological functions of centipedgrass extracts; Identification of H{sub 2}O{sub 2} removing enzyme in radiation irradiated plant (Spinach); Determination of the effects of centipedgrass extracts on anti-obesity and anti-cancer activities.

Study on production of useful metabolites by development of advanced cell culture techniques using radiation

International Nuclear Information System (INIS)

Chung, Byung Yeoup; Kim, Jinhong; Lee, Seung Sik; Bai, Hyounwoo; An, Byung Chull; Lee, Eun Mi; Lee, Jae Taek; Kim, Mi Ja

2010-12-01

The purpose of this project is improvement of investigation, materialization and evaluation techniques on effectiveness for functional natural compounds throughout development of tissue/cell culture techniques for mass production of useful metabolites using radiation. Research scope includes Development of a technique for radiation tissue and cell culture, Database construction for radiation response in plants and radiation effects, Construction of general-purpose national based techniques of cell culture technique using radiation. Main results are as follow: Isolation and identification of radiation induced basI gene; Determination of stresses sensitivities by transformating basI gene into arabidopsis; Isolation and identification of radiation induced chaperon proteins (PaAhpC and yPrxII) from Pseudomonas and yeast, and structural and functional analysis of the proteins; Determination of oxidative and heat resistance by transformating PaAhpC; Isolation and identification of maysin and its derivatives from centipedgrass; Investigation of enhancement technique for improving maysin and its derivatives production using radiation; Investigation of removing undesirable color in maysin and its derivatives using radiation; Determination of the effect of radiation on physiological functions of centipedgrass extracts; Identification of H 2 O 2 removing enzyme in radiation irradiated plant (Spinach); Determination of the effects of centipedgrass extracts on anti-obesity and anti-cancer activities

Shock fitting classical techniques, recent developments, and memoirs of Gino Moretti

CERN Document Server

Paciorri, Renato

2017-01-01

This book describes the revolutionary capabilities of new shock fitting algorithms; a great improvement in computational fluid dynamics (CFD) for high-speed numerical simulations. Shock fitting methods provide a solution to the current difficulties and inaccuracies in shock-capturing approaches. This work traces the evolution of shock-fitting methods, from the pioneering methods based on the structured grids (boundary and floating shock-fitting) to recent developments on unstructured grids, illustrating algorithmic details, significant applications and potential developments.  Also, to celebrate the centenary birth of the father of shock-fitting techniques, the book also includes a tribute to Gino Moretti, as well as his unpublished manuscript. This book will appeal to professionals, researchers, and graduate students in the field of CFD.

TIGER: Development of Thermal Gradient Compensation Algorithms and Techniques

Science.gov (United States)

Hereford, James; Parker, Peter A.; Rhew, Ray D.

2004-01-01

In a wind tunnel facility, the direct measurement of forces and moments induced on the model are performed by a force measurement balance. The measurement balance is a precision-machined device that has strain gages at strategic locations to measure the strain (i.e., deformations) due to applied forces and moments. The strain gages convert the strain (and hence the applied force) to an electrical voltage that is measured by external instruments. To address the problem of thermal gradients on the force measurement balance NASA-LaRC has initiated a research program called TIGER - Thermally-Induced Gradients Effects Research. The ultimate goals of the TIGER program are to: (a) understand the physics of the thermally-induced strain and its subsequent impact on load measurements and (b) develop a robust thermal gradient compensation technique. This paper will discuss the impact of thermal gradients on force measurement balances, specific aspects of the TIGER program (the design of a special-purpose balance, data acquisition and data analysis challenges), and give an overall summary.

Development of an intertidal mangrove nursery and afforestation techniques

Digital Repository Service at National Institute of Oceanography (India)

Untawale, A.G.

The development of an intertidal mangrove nursery and afforestation technique for regeneration and restoration of mangroves of Goa is described. Site selection, source of plant material, nursery plantation, season of transplantation, technique...

Research and development of metals for medical devices based on clinical needs

Directory of Open Access Journals (Sweden)

Takao Hanawa

2012-01-01

Full Text Available The current research and development of metallic materials used for medicine and dentistry is reviewed. First, the general properties required of metals used in medical devices are summarized, followed by the needs for the development of α + β type Ti alloys with large elongation and β type Ti alloys with a low Young's modulus. In addition, nickel-free Ni–Ti alloys and austenitic stainless steels are described. As new topics, we review metals that are bioabsorbable and compatible with magnetic resonance imaging. Surface treatment and modification techniques to improve biofunctions and biocompatibility are categorized, and the related problems are presented at the end of this review. The metal surface may be biofunctionalized by various techniques, such as dry and wet processes. These techniques make it possible to apply metals to scaffolds in tissue engineering.

Advantages and Disadvantages of Four Interview Techniques in Qualitative Research

Directory of Open Access Journals (Sweden)

Raymond Opdenakker

2006-09-01

Full Text Available Face-to-face interviews have long been the dominant interview technique in the field of qualitative research. In the last two decades, telephone interviewing became more and more common. Due to the explosive growth of new communication forms, such as computer mediated communication (for example e-mail and chat boxes, other interview techniques can be introduced and used within the field of qualitative research. For a study in the domain of virtual teams, I used various communication possibilities to interview informants as well as face-to-face interviews. In this article a comparison will be made concerning the advantages and disadvantages of face-to-face, telephone, e-mail and MSN messenger interviews. By including telephone and MSN messenger interviews in the comparison, the scope of this article is broader than the article of BAMPTON and COWTON (2002. URN: urn:nbn:de:0114-fqs0604118

Waste and Disposal: Research and Development

Energy Technology Data Exchange (ETDEWEB)

Neerdael, B.; Marivoet, J.; Put, M.; Van Iseghem, P

2001-04-01

This contribution to the annual report describes the main activities of the Waste and Disposal Department of the Belgian Nuclear Research Center SCK-CEN. Achievements in 2000 in three topical areas are reported on: performance assessments, waste forms/packages and near- and far field studies. Performance assessment calculations were made for the geological disposal of high-level and long-lived waste in a clay formation. An impact assessment was completed for the radium storage facility at Olen (Belgium). Geological data, pumping rates and various hydraulic parameters were collected in support of the development of a new version of the regional hydrogeological model for the Mol site. Research and Development on waste forms and waste packages included both in situ and laboratory tests. Main emphasis in 2000 was on corrosion studies on vitrified high-level waste, the investigation of localised corrosion of candidate container and overpack materials and the study of the effect of the degradation of cellulose containing waste as well as of bituminized waste on the solubility and the sorption of Pu and Am in geological disposal conditions in clay. With regard to near- and far-field studies, percolation and diffusion experiments to determine migration parameters of key radionuclides were continued. The electromigration technique was used to study the migration of redox sensitive species like uranium. In addition to laboratory experiments, several large-scale migration experiments were performed in the HADES Underground Research Laboratory. In 2000, the TRANCOM Project to study the influence of dissolved organic matter on radionuclide migration as well as the RESEAL project to demonstrate shaft sealing were continued.

Waste and Disposal: Research and Development

International Nuclear Information System (INIS)

Neerdael, B.; Marivoet, J.; Put, M.; Van Iseghem, P.

2001-01-01

This contribution to the annual report describes the main activities of the Waste and Disposal Department of the Belgian Nuclear Research Center SCK-CEN. Achievements in 2000 in three topical areas are reported on: performance assessments, waste forms/packages and near- and far field studies. Performance assessment calculations were made for the geological disposal of high-level and long-lived waste in a clay formation. An impact assessment was completed for the radium storage facility at Olen (Belgium). Geological data, pumping rates and various hydraulic parameters were collected in support of the development of a new version of the regional hydrogeological model for the Mol site. Research and Development on waste forms and waste packages included both in situ and laboratory tests. Main emphasis in 2000 was on corrosion studies on vitrified high-level waste, the investigation of localised corrosion of candidate container and overpack materials and the study of the effect of the degradation of cellulose containing waste as well as of bituminized waste on the solubility and the sorption of Pu and Am in geological disposal conditions in clay. With regard to near- and far-field studies, percolation and diffusion experiments to determine migration parameters of key radionuclides were continued. The electromigration technique was used to study the migration of redox sensitive species like uranium. In addition to laboratory experiments, several large-scale migration experiments were performed in the HADES Underground Research Laboratory. In 2000, the TRANCOM Project to study the influence of dissolved organic matter on radionuclide migration as well as the RESEAL project to demonstrate shaft sealing were continued

Development of Techniques for Small Scale Indigenous 99Mo Production Using LEU Targets at ICN Pitesti-Romania [Country report: Romania

International Nuclear Information System (INIS)

2015-01-01

Initiation of the IAEA Coordinated Research Project (CRP) “Development Techniques for Small Scale Indigenous 99 Mo Production Using LEU Fission or Neutron Activation” during 2005 allowed Member States to participate through their research organization on contractor arrangement to accomplish the CRP objectives. Among these, the participating research organization Institute for Nuclear Research Pitesti Romania (ICN), was the beneficiary of financial support and Argonne National Laboratory assistance provided by US Department of Energy to the CRP for development of techniques for fission 99 Mo production based on LEU modified CINTICHEM process. The Agency’s role in this field was to assist in the transfer and adaptation of existing technology in order to disseminate a technique, which advances international non-proliferation objectives and promotes sustainable development needs, while also contributing to extend the production capacity for addressing supply shortages from the latest years. The Institute for Nuclear Research, considering the existing good conditions of infrastructure of the research reactor with suitable irradiation conditions for radioisotopes, a post irradiation laboratory with direct transfer of irradiated targets from the reactor and handling of high radioactive sources, and simultaneously the existence of an expanding internal market, decided to undertake the necessary steps in order to produce fission molybdenum. The Institute intends to develop the capability to respond to the domestic needs in cooperation with the IFINN–HH from Bucharest, which is able to perform the last step consisting in the loading of fission molybdenum on chromatography generators and dispensing to the final client. The primary scope of the project is the development of the necessary technological steps and chemical processing steps in order to be able to cover the entire process for fission molybdenum production at the required standard of purity

Development of optically stimulated luminescence technology for personnel monitoring applications at Bhabha Atomic Research Centre

International Nuclear Information System (INIS)

Kulkarni, M.S.

2012-01-01

The popularity of optically stimulated luminescence (OSL) technology in the radiation dosimetry applications, in general, and personnel and environmental monitoring, in particular, has driven investigation and developmental programme using OSL technique for a viable system for personnel monitoring at Bhabha Atomic Research Centre. The OSL related phosphor materials and instrumentation development has a very recent history in Bhabha Atomic Research Centre. The OSL technique is more versatile and easy to use than thermoluminescence (TL) technique. The X- and gamma ray (both high and low energy) photons and beta particles can be measured with OSL technique. In the OSL technique, the phosphor (say á- Ai 2 O 3 :C) is optically stimulated by blue/green light and the resulting light emitted from Al 2 O 3 :C (410-420 nm) is measured and correlated to the amount of radiation exposure. For a fixed stimulation intensity, the emitted blue light from the Al 2 O 3 :C dosimeter is proportional to the radiation exposure. The OSL technology is being increasingly used in several applications in external radiation dosimetry, in-vivo medical dosimetry in radiotherapy, in-situ, long-term monitoring system for radioactive contaminants, geological and archaeological dating of sediments, etc. For the success of OSL technology for large scale countrywide personnel monitoring program, indigenous development of dosimetric grade sensitive detector material was a key issue. Therefore, since 2002, efforts were directed towards the development of OSL phosphors (like aluminum oxide doped with carbon, á- Al 2 O 3 :C) and related instrumentation. To begin with, simple low cost OSL readers were developed using blue (470 nm) and green (530 nm) LED clusters. New techniques were developed for the preparation of dosimetric grade á- Ai 2 O 3 :C and other OSL phosphors. With the success in the development of indigenous technique for the large scale preparation of á- Al 2 O 3 :C phosphor, a four

Development of fabrication technique of bulk high superconductor

International Nuclear Information System (INIS)

Hong, Gye Won; Kim, Chang Joong; Kim, Ki Baik; Lee, Ho Jin; Lee, Hee Gyoun; Kwon, Sun Chil.

1997-05-01

In order to realize the commercial application of HTSC materials, it is necessary to develop the fabrication process of high Tc oxide superconductor materials with desired shape and for practical application and high critical current density as well as good mechanical strength which critical current density as well as good mechanical strength which can withstand high lorenz force generated at high magnetic field. Much studies have been concentrated to develop the fabrication technique for high critical current density but still there are a lot of gap which should be overcome for large scale application of HTSC materials at liquid nitrogen temperature. Recently some new fabrication techniques have been developed for YBCO bulk superconductor with high mechanical strength and critical current density. In this project, plastic extrusion and melt process techniques were studied. The components materials for the current lead and the flywheel application were fabricated and their characteristics were investigated from the view point of microstructure and phase formation during heat treatment process. (author). 64 refs., 59 figs

Designs, Techniques, and Reporting Strategies in Geography Education: A Review of Research Methods

Science.gov (United States)

Zadrozny, Joann; McClure, Caroline; Lee, Jinhee; Jo, Injeong

2016-01-01

A wide variety of research is being completed and published in geography education. The purpose of this article is to provide a general overview of the different types of methodologies, research designs, and techniques used by geography education researchers. Analyzing three geography education journals, we found 191 research articles published…

Development of volume reduction treatment techniques for low level radioactive wastes

International Nuclear Information System (INIS)

Nabatame, Yasuzi

1984-01-01

The solid wastes packed in drums are preserved in the stores of nuclear establishments in Japan, and the quantity of preservation has already reached about 60 % of the capacity. It has become an important subject to reduce the quantity of generation of radioactive wastes and how to reduce the volume of generated wastes. As the result of the research aiming at the development of the solidified bodies which are excellent in the effect of volume reduction and physical properties, it was confirmed that the plastic solidified bodies using thermosetting resin were superior to conventional cement or asphalt solidification. The plastic solidifying system can treat various radioactive wastes. After radioactive wastes are dried and powdered, they are solidified with plastics, therefore, the effect of volume reduction is excellent. The specific gravity, strength and the resistance to water, fire and radiation were confirmed to be satisfacotory. The plastic solidifying system comprises three subsystems, that is, drying system, powder storing and supplying system and plastic solidifying system. Also the granulation technique after drying and powdering, acid decomposition technique, the microwave melting and solidifying technique for incineration ash, plasma melting process and electrolytic polishing decontamination are described. (Kako, I.)

Changing Research Practices and Research Infrastructure Development

Science.gov (United States)

Houghton, John W.

2005-01-01

This paper examines changing research practices in the digital environment and draws out implications for the development of research infrastructure. Reviews of the literature, quantitative indicators of research activities and our own field research in Australia suggest that there is a new mode of knowledge production emerging, changing research…

Advantages and disadvantages of four interview techniques in qualitative research

NARCIS (Netherlands)

Opdenakker, R.J.G.

2006-01-01

Face-to-face interviews have long been the dominant interview technique in the field of qualitative research. In the last two decades, telephone interviewing became more and more common. Due to the explosive growth of new communication forms, such as computer mediated communication (for example

Development of XAFS Into a Structure Determination Technique

Science.gov (United States)

Stern, E. A.

After the detection of diffraction of x-rays by M. Laue in 1912, the technique was soon applied to structure determination by Bragg within a year. On the other hand, although the edge steps in X-Ray absorption were discovered even earlier by Barkla and both the near edge (XANES) and extended X-Ray fine structure (EXAFS) past the edge were detected by 1929, it still took over 40 years to realize the structure information contained in this X-Ray absorption fine structure (XAFS). To understand this delay a brief historical review of the development of the scientific ideas that transformed XAFS into the premiere technique for local structure determination is given. The development includes both advances in theoretical understanding and calculational capabilities, and in experimental facilities, especially synchrotron radiation sources. The present state of the XAFS technique and its capabilities are summarized.

Development of realtime monitoring technology for laser photoreaction product - Development of glow discharge-mass spectrometry (GD-MS) hybrid techniques for trace analysis of refractory elements

Energy Technology Data Exchange (ETDEWEB)

Lee, Sang Chun [Kyungnam University, Masan (Korea); Kim, Ha Suck [Seoul National University, Seoul (Korea); Kim, Hyo Jin [Dongduk Women' s University, Seoul (Korea)

2000-04-01

This research is focusing on development of hybrid techniques of glow discharge-mass spectrometry for the trace analysis of refractory elements. At first, we developed a glow discharge(GD) ionization cell and its characteristics was investigated. The new GD cell was designed based on direct current hollow cathode glow discharge and it is used for quadrupole mass analyzer and time-of-flight mass analyzer. Currently, GD-quadrupole mass spectrometry is working for the analysis of refractory elements. The experimental results show relatively good for trace analysis. In addition, ion mobile spectrometry using plasma and liquid discharge technique were investigated for the analysis of refractory elements and both techniques need more investigation to deduce the their usefulness. 30 refs., 67 figs., 4 tabs. (Author)

Quality programs for waste management research and development

International Nuclear Information System (INIS)

Hood, F.C.

1990-06-01

The Pacific Northwest Laboratory (PNL) is a US Department of Energy (DOE) multi-program national laboratory. PNL develops waste management processes and techniques as well as providing management services for characterization and remediation of radioactive and/or hazardous waste sites for the DOE. This paper deals with the application of total quality management principles to waste management research and development activities at PNL. The PNL Quality Program has evolved with expanding expectations for ''error-free'' performance from the client and the public sector; it describes the management controls needed to achieve desired levels of product quality and to verify they are reached. It includes the definition of work requirements, performance objectives, roles and responsibilities, performance indicators and measurement, performance feedback mechanisms, and process improvement methodologies. 6 refs

Investigation and Development of Control Laws for the NASA Langley Research Center Cockpit Motion Facility

Science.gov (United States)

Coon, Craig R.; Cardullo, Frank M.; Zaychik, Kirill B.

2014-01-01

The ability to develop highly advanced simulators is a critical need that has the ability to significantly impact the aerospace industry. The aerospace industry is advancing at an ever increasing pace and flight simulators must match this development with ever increasing urgency. In order to address both current problems and potential advancements with flight simulator techniques, several aspects of current control law technology of the National Aeronautics and Space Administration (NASA) Langley Research Center's Cockpit Motion Facility (CMF) motion base simulator were examined. Preliminary investigation of linear models based upon hardware data were examined to ensure that the most accurate models are used. This research identified both system improvements in the bandwidth and more reliable linear models. Advancements in the compensator design were developed and verified through multiple techniques. The position error rate feedback, the acceleration feedback and the force feedback were all analyzed in the heave direction using the nonlinear model of the hardware. Improvements were made using the position error rate feedback technique. The acceleration feedback compensator also provided noteworthy improvement, while attempts at implementing a force feedback compensator proved unsuccessful.

Annual report on research and development 1980 of the Institut fuer Technische Physik

International Nuclear Information System (INIS)

1981-06-01

Progress of the following working areas of the institute is reported: magnets for fusion technology (TESPE experiment, the Large Coil Task (LCT)); components and technology (development of high field superconductors (Nb 3 Sn, Nb 3 Al)), cooling techniques (HELITEX experiment); system studies on fusion reactor components; magnets for research and technology; basic research related to superconductivity; cryo-energy technology; the cryogenic engineering infrastructure of the institute. (GSCH)

Research tools | IDRC - International Development Research Centre

International Development Research Centre (IDRC) Digital Library (Canada)

Through training materials and guides, we aim to build skills and knowledge to enhance the quality of development research. We also offer free access to our database of funded research projects, known as IDRIS+, and our digital library. Our research tools include. Guide to research databases at IDRC: How to access and ...

Proposal of a research and development program for cerebral tumor treatment by neutron capture

International Nuclear Information System (INIS)

Silva, M.M. da

1992-01-01

The researches related to the Boron Neutron Capture Therapy, that were developed at Nuclear Energetic Institute (IPEN/CNEN-SP) and the Coordination for Special Projects (COPESP) are described. A coordinate development program is presented for constructing of an installation, with the purpose of routine utilization of this technique. (C.G.C.)

A research view of supply chain management: Developments and topics for exploration

Directory of Open Access Journals (Sweden)

JR Stock

2009-12-01

Full Text Available There have been advances in the understanding of supply chain management (SCM since its inception in the early-1980s. However, there are still some basic issues of SCM that remain unresolved. Much of the research that has been conducted takes one or more of the following three perspectives: (1 development of methods and techniques to study SCM and its components/processes; (2 developing solutions or answers to specific supply chain-related problems or challenges; and/or (3 measuring the results or outcomes of supply chain strategies and tactics. Each of these three perspectives is briefly examined, with selected examples from the literature cited to illustrate the type of research that has been conducted. Some potential areas of research exploration are presented. The areas examined include: theory development, and SCM processes and functions.

Alternative method of highway traffic safety analysis for developing countries using delphi technique and Bayesian network.

Science.gov (United States)

Mbakwe, Anthony C; Saka, Anthony A; Choi, Keechoo; Lee, Young-Jae

2016-08-01

Highway traffic accidents all over the world result in more than 1.3 million fatalities annually. An alarming number of these fatalities occurs in developing countries. There are many risk factors that are associated with frequent accidents, heavy loss of lives, and property damage in developing countries. Unfortunately, poor record keeping practices are very difficult obstacle to overcome in striving to obtain a near accurate casualty and safety data. In light of the fact that there are numerous accident causes, any attempts to curb the escalating death and injury rates in developing countries must include the identification of the primary accident causes. This paper, therefore, seeks to show that the Delphi Technique is a suitable alternative method that can be exploited in generating highway traffic accident data through which the major accident causes can be identified. In order to authenticate the technique used, Korea, a country that underwent similar problems when it was in its early stages of development in addition to the availability of excellent highway safety records in its database, is chosen and utilized for this purpose. Validation of the methodology confirms the technique is suitable for application in developing countries. Furthermore, the Delphi Technique, in combination with the Bayesian Network Model, is utilized in modeling highway traffic accidents and forecasting accident rates in the countries of research. Copyright © 2016 Elsevier Ltd. All rights reserved.

Development of process diagnostic techniques for piping and equipment

International Nuclear Information System (INIS)

Yotsutsuji, Mitoshi

1987-01-01

The thing required for using the facilities composing a plant for a long period without anxiety is to quantitatively grasp the quantities of the present condition of the facilities and to take the necessary measures beforehand. For this purpose, the diagnostic techniques for quickly and accurately detect the quantities of the condition of facilities are necessary, and the development of process diagnostic techniques has been desired. The process diagnostic techniques mentioned here mean those for diagnosing the contamination, clogging and performance of towers, tanks, heat exchangers and others. Idemitsu Engineering Co. had developed a simplified diagnostic equipment for detecting the state of fouling in piping in 1982, which is the gamma ray transmission diagnosis named Scale Checker. By further improving it, the process diagnostic techniques for piping and equipment were developed. In this report, the course of development and examination, the principle of detection, the constitution and the examination of remodeling of the Scale Checker are reported. As the cases of process diagnosis in plant facilities, the diagnosis of the clogging in process piping and the diagnosis of the performance of a distillation tower were carried out. The contents of the diagnosis and the results of those cases are explained. (Kako, I.)

Sampling and sample preparation development for analytical and on-line measurement techniques of process liquids; Naeytteenoton ja kaesittelyn kehittaeminen prosessinesteiden analytiikan ja on-line mittaustekniikan tarpeisiin - MPKT 11

Energy Technology Data Exchange (ETDEWEB)

Karttunen, K. [Oulu Univ. (Finland)

1998-12-31

Main goal of the research project is to develop sampling and sample handling methods and techniques for pulp and paper industry to be used for analysis and on-line purposes. The research focus specially on the research and development of the classification and separation methods and techniques needed for liquid and colloidal substances as well as in ion analysis. (orig.)

Sampling and sample preparation development for analytical and on-line measurement techniques of process liquids; Naeytteenoton ja kaesittelyn kehittaeminen prosessinesteiden analytiikan ja on-line mittaustekniikan tarpeisiin - MPKT 11

Energy Technology Data Exchange (ETDEWEB)

Karttunen, K [Oulu Univ. (Finland)

1999-12-31

Main goal of the research project is to develop sampling and sample handling methods and techniques for pulp and paper industry to be used for analysis and on-line purposes. The research focus specially on the research and development of the classification and separation methods and techniques needed for liquid and colloidal substances as well as in ion analysis. (orig.)

Chaparral and associated ecosystems management: a 5-year research and development program

Science.gov (United States)

C. Eugene Conrad; George A. Roby; Serena C. Hunter

1986-01-01

Chaparral is the dominant vegetation in the wildlands of central and southern California. It has evolved fire adaptions that make it flammable and trigger postfire regeneration, thereby ensuring plant community rejuvenation. To provide a framework for chaparral-related research and accelerate development and demonstration of urgently needed management techniques, the...

Development of a groundwater monitoring system at Horonobe Underground Research Center

International Nuclear Information System (INIS)

Nanjo, Isao; Amano, Yuki; Iwatsuki, Teruki; Murakami, Hiroaki; Kunimaru, Takanori; Morikawa, Keita; Hosoya, Shinichi

2012-03-01

Japan Atomic Energy Agency (JAEA) develops basic investigation techniques for deep geological environment around Underground Research Laboratory (URL) at Horonobe area, Japan. The observation technique of hydrochemical condition in low permeable sedimentary rock around the facility is one of R and D subjects. We report, 1) development of hydrochemical monitoring system to observe water pressure, pH, electric conductivity, dissolved oxygen, redox potential and temperature, 2) hydrochemical observation results around URL under construction. The applicability of the hydrochemical monitoring system is evaluated for low permeable sedimentary rock bearing abundant dissolved gases. The hydrochemical observation during facility construction demonstrates that pH and redox potential of groundwater almost did not changed even at hydraulic disturbed zone (water pressure decreased zone). A CD-ROM is attached as an appendix. (J.P.N.)

Research Librarian | IDRC - International Development Research ...

International Development Research Centre (IDRC) Digital Library (Canada)

Job Summary The Research Librarian is a key member of a team responsible for the delivery of comprehensive research information services which contribute strategic value to the work of clients. Intermediated search services at the expert level, the development and delivery of orientations, training/coaching, ...

Research reactors serving the radiotracer technique: An overlooked opportunity?

International Nuclear Information System (INIS)

Bode, P.

2010-01-01

The unique features of using radiotracers are not always fully explored at nuclear research reactor centers. The radiotracer method is a versatile and powerful tool in the study of a wide variety of applications in e.g. chemistry, biology, agriculture, medicine and (industrial) technology. The big advantage of radiotracers above e.g. stable isotope tracers, commonly applied in e.g. nutritional studies, is that radiotracers allow for non-invasive studies of both steady-state and dynamic systems, in equilibrium situations and for transport and exchange phenomena and thus provide information on the chemical and/or physical status of elements. The radiotracer method does not imply huge equipment investments but rather requires that the four interrelated aspects: experimental designs, data treatment including tracer kinetic analysis and data interpretation are careful considered. Radiotracer production with reactors often implies additional fundamental research to use smart nuclear reactions and chemical separations so as to obtain an almost no-carrier added tracer. Nuclear analytical groups, already equipped with gamma-ray spectrometers, can thus extend their research program. Using Ge-spectrometers, multi-labeling experiments are possible which allow for unique applications if different radionuclides exist for the same element, such as 65 Zn and 69m Zn or 64 Cu and 67 Cu. The developments in novel scintillation detectors, room-temperature semiconductor detectors (like CdZnTe) and position-sensitive detectors open the door for an entire new scope of radiotracer applications, such as SPECT. Once applied to in-vitro studies with cell cultures, the nuclear analytical group may position itself into the worlds of medical research, biochemistry and biotechnology. Radiotracers can be used to study the properties of drug-delivering compounds as used in e.g, cancer therapy. Radiotracers can be added as a label to solid particles, to liquids but may also be applied in the

Development of New Technologies for Stem Cell Research

Directory of Open Access Journals (Sweden)

Xibo Ma

2012-01-01

Full Text Available Since the 1960s, the stem cells have been extensively studied including embryonic stem cells, neural stem cells, bone marrow hematopoietic stem cells, and mesenchymal stem cells. In the recent years, several stem cells have been initially used in the treatment of diseases, such as in bone marrow transplant. At the same time, isolation and culture experimental technologies for stem cell research have been widely developed in recent years. In addition, molecular imaging technologies including optical molecular imaging, positron emission tomography, single-photon emission computed tomography, and computed tomography have been developed rapidly in recent the 10 years and have also been used in the research on disease mechanism and evaluation of treatment of disease related with stem cells. This paper will focus on recent typical isolation, culture, and observation techniques of stem cells followed by a concise introduction. Finally, the current challenges and the future applications of the new technologies in stem cells are given according to the understanding of the authors, and the paper is then concluded.

Development and fabrication of patient-specific knee implant using additive manufacturing techniques

Science.gov (United States)

Zammit, Robert; Rochman, Arif

2017-10-01

Total knee replacement is the most effective treatment to relief pain and restore normal function in a diseased knee joint. The aim of this research was to develop a patient-specific knee implant which can be fabricated using additive manufacturing techniques and has reduced wear rates using a highly wear resistant materials. The proposed design was chosen based on implant requirements, such as reduction in wear rates as well as strong fixation. The patient-specific knee implant improves on conventional knee implants by modifying the articulating surfaces and bone-implant interfaces. Moreover, tribological tests of different polymeric wear couples were carried out to determine the optimal materials to use for the articulating surfaces. Finite element analysis was utilized to evaluate the stresses sustained by the proposed design. Finally, the patient-specific knee implant was successfully built using additive manufacturing techniques.

Study on production of useful metabolites by development of advanced cell culture techniques using radiation

Energy Technology Data Exchange (ETDEWEB)

Chung, Byung Yeoup; Kim, Jin Hong; Lee, Seung Sik; Kim, Jae Sung; An, Byung Chull; Moon, Yu Ran; Lee, Eun Mi; Lee, Min Hee; Lee, Jae Tack [KAERI, Daejeon (Korea, Republic of)

2010-02-15

The purpose of this project is improvement of investigation, materialization and evaluation techniques on effectiveness for functional natural compounds throughout development of tissue/cell culture techniques for mass production of useful metabolites using radiation. Research scope includes 1) Development of a technique for radiation tissue and cell culture, 2) Database construction for radiation response in plants and radiation effects, 3) Construction of general-purpose national based techniques of cell culture technique using radiation. Main results are as follow: mass culture of the adventitious roots of mountain ginseng (Panax ginseng C. A. Meyer) roots using rare earth elements in bioreactor: characterization of a transcription factor EoP gene from centipedegrass and the transcription regulation of LexA from Synechocystis sp PCC6803 and E. coli: identification of gamma-ray induced hydrogenase synthesis in hox gene transformed E. coli: transformation and the selection of the EoP transgene from Arabidopsis, rice and lettuce: Identification of the maysin and maysin derivatives in centipedegrass: characterization of gamma-ray induced color change in Taxus cuspidata: verification of the expression of antioxidant proteins (POD, APX and CAT) to gamma-ray in Arabidopsis: comparison of the response of the expression level to gamma-ray or H{sub 2}O{sub 2} in Arabidopsis; verification of the responses and effects to gamma-ray from plants (analysis of NPQ and ROS levels): the development method for rapidly enhancing maysin content of centipede grass; establishment of mass culture system for red beet

Study on production of useful metabolites by development of advanced cell culture techniques using radiation

International Nuclear Information System (INIS)

Chung, Byung Yeoup; Kim, Jin Hong; Lee, Seung Sik; Kim, Jae Sung; An, Byung Chull; Moon, Yu Ran; Lee, Eun Mi; Lee, Min Hee; Lee, Jae Tack

2010-02-01

The purpose of this project is improvement of investigation, materialization and evaluation techniques on effectiveness for functional natural compounds throughout development of tissue/cell culture techniques for mass production of useful metabolites using radiation. Research scope includes 1) Development of a technique for radiation tissue and cell culture, 2) Database construction for radiation response in plants and radiation effects, 3) Construction of general-purpose national based techniques of cell culture technique using radiation. Main results are as follow: mass culture of the adventitious roots of mountain ginseng (Panax ginseng C. A. Meyer) roots using rare earth elements in bioreactor: characterization of a transcription factor EoP gene from centipedegrass and the transcription regulation of LexA from Synechocystis sp PCC6803 and E. coli: identification of gamma-ray induced hydrogenase synthesis in hox gene transformed E. coli: transformation and the selection of the EoP transgene from Arabidopsis, rice and lettuce: Identification of the maysin and maysin derivatives in centipedegrass: characterization of gamma-ray induced color change in Taxus cuspidata: verification of the expression of antioxidant proteins (POD, APX and CAT) to gamma-ray in Arabidopsis: comparison of the response of the expression level to gamma-ray or H 2 O 2 in Arabidopsis; verification of the responses and effects to gamma-ray from plants (analysis of NPQ and ROS levels): the development method for rapidly enhancing maysin content of centipede grass; establishment of mass culture system for red beet

Nuclear Medicine Techniques in Haematological Research: Our Experience

International Nuclear Information System (INIS)

Maktouf, C.; Bounemra, A. B.; Elbedoui, J.; Bchir, F.; Louzir, H.; Karoui, M.; Dellagi, K.

2007-01-01

Abstract Nuclear diagnostic techniques have revolutionized medicine in its different specialties, among them hematology. This is, by the more relevant routine procedures of diagnostic as well as by future trends in this field, in-vivo research and clinical applications at the biochemical level. We report a part of our experience by the use in vitro and in vivo established nuclear medicine techniques, in evaluating hematological disease for clinical research that will lead to the basic research. The first study is megaloblastic anemia in which we report a prospective study from Tunisia, northern Africa, of 478 patients with megaloblastic anemia recruited over three years period. Etiologic investigation using cobalamin and folates measurements and the Schilling test revealed that folate deficiency was very uncommon and that 95% of patients had cobalamin deficiency that was the consequence of pernicious anemia (PA) in 87%. Patients with PA had a median age at presentation of 45.5 years with 21.5% of cases occurring in patients younger than 30 years. Patients less than 20 years old should be specifically investigated for genetic defect in cobalamin absorption. In the second study, the red cell mass was determined following labeling the red blood cells with either sodium radiochromate (51Cr) and the measurement of Plasma Volume is based on dilution of the injected radioiodine (125I)-labeled human serum albumin in the blood circulation (2,3). It is important to make this differentiation, thus our patients will fulfilled the criteria of the Polycythemia Vera Study Group, and therefore we will be able to evaluate serum VEGF levels in patients with Polycythemia Vera, secondary polycythemia and idiopatic polycythemia in an attempt to investigate the involvement and significance of this cytokine in these haematological disorders.

Existing and new techniques in uranium exploration

International Nuclear Information System (INIS)

Bowie, S.H.U.; Cameron, J.

1976-01-01

The demands on uranium exploration over the next 25 years will be very great indeed and will call for every possible means of improvement in exploration capability. The first essential is to increase geological knowledge of the mode of occurrence of uranium ore deposits. The second is to improve existing exploration techniques and instrumentation while, at the same time, promoting research and development on new methods to discover uranium ore bodies on the earth's surface and at depth. The present symposium is an effort to increase co-operation and the exchange of information in the critical field of uranium exploration techniques and instrumentation. As an introduction to the symposium a brief review is presented, firstly of what can be considered as existing techniques and, secondly, of techniques which have not yet been used on an appreciable scale. Some fourteen techniques used over the last 30 years are identified and their appropriate application, advantages and limitations are briefly summarized and the possibilities of their further development considered. The aim of future research on new techniques, in addition to finding new ways and means of identifying surface deposits, should be mainly directed to devising methods and instrumentation capable of detecting buried ore bodies that do not give a gamma signal at the surface. To achieve this aim, two contributory factors are essential: adequate financial support for research and development and increased specialized training in uranium exploration and instrumentation design. The papers in this symposium describe developments in the existing techniques, proposals for future research and development and case histories of exploration programmes

The development of human factors technologies -The development of human behaviour analysis techniques-

Energy Technology Data Exchange (ETDEWEB)

Lee, Jung Woon; Lee, Yong Heui; Park, Keun Ok; Chun, Se Woo; Suh, Sang Moon; Park, Jae Chang [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1995-07-01

In order to contribute to human error reduction through the studies on human-machine interaction in nuclear power plants, this project has objectives to develop SACOM(Simulation Analyzer with a Cognitive Operator Model) and techniques for human error analysis and application. In this year, we studied the followings: development of SACOM> (1) Site investigation of operator tasks, (2) Development of operator task micro structure and revision of micro structure, (3) Development of knowledge representation software and SACOM prototype, (4) Development of performance assessment methodologies in task simulation and analysis of the effects of performance shaping factors. development of human error analysis and application techniques> (1) Classification of error shaping factors(ESFs) and development of software for ESF evaluation, (2) Analysis of human error occurrences and revision of analysis procedure, (3) Experiment for human error data collection using a compact nuclear simulator, (4) Development of a prototype data base system of the analyzed information on trip cases. 55 figs, 23 tabs, 33 refs. (Author).

TU-E-BRB-02: DIR QA Options and Research Development

International Nuclear Information System (INIS)

Kirby, N.

2015-01-01

Deformable image registration (DIR) is developing rapidly and is poised to substantially improve dose fusion accuracy for adaptive and retreatment planning and motion management and PET fusion to enhance contour delineation for treatment planning. However, DIR dose warping accuracy is difficult to quantify, in general, and particularly difficult to do so on a patient-specific basis. As clinical DIR options become more widely available, there is an increased need to understand the implications of incorporating DIR into clinical workflow. Several groups have assessed DIR accuracy in clinically relevant scenarios, but no comprehensive review material is yet available. This session will also discuss aspects of the AAPM Task Group 132 on the Use of Image Registration and Data Fusion Algorithms and Techniques in Radiotherapy Treatment Planning official report, which provides recommendations for DIR clinical use. We will summarize and compare various commercial DIR software options, outline successful clinical techniques, show specific examples with discussion of appropriate and inappropriate applications of DIR, discuss the clinical implications of DIR, provide an overview of current DIR error analysis research, review QA options and research phantom development and present TG-132 recommendations. Learning Objectives: Compare/contrast commercial DIR software and QA options Overview clinical DIR workflow for retreatment To understand uncertainties introduced by DIR Review TG-132 proposed recommendations

TU-E-BRB-02: DIR QA Options and Research Development

Energy Technology Data Exchange (ETDEWEB)

Kirby, N. [University of Texas HSC SA (United States)

2015-06-15

Deformable image registration (DIR) is developing rapidly and is poised to substantially improve dose fusion accuracy for adaptive and retreatment planning and motion management and PET fusion to enhance contour delineation for treatment planning. However, DIR dose warping accuracy is difficult to quantify, in general, and particularly difficult to do so on a patient-specific basis. As clinical DIR options become more widely available, there is an increased need to understand the implications of incorporating DIR into clinical workflow. Several groups have assessed DIR accuracy in clinically relevant scenarios, but no comprehensive review material is yet available. This session will also discuss aspects of the AAPM Task Group 132 on the Use of Image Registration and Data Fusion Algorithms and Techniques in Radiotherapy Treatment Planning official report, which provides recommendations for DIR clinical use. We will summarize and compare various commercial DIR software options, outline successful clinical techniques, show specific examples with discussion of appropriate and inappropriate applications of DIR, discuss the clinical implications of DIR, provide an overview of current DIR error analysis research, review QA options and research phantom development and present TG-132 recommendations. Learning Objectives: Compare/contrast commercial DIR software and QA options Overview clinical DIR workflow for retreatment To understand uncertainties introduced by DIR Review TG-132 proposed recommendations.

Research review and development trends of human reliability analysis techniques

International Nuclear Information System (INIS)

Li Pengcheng; Chen Guohua; Zhang Li; Dai Licao

2011-01-01

Human reliability analysis (HRA) methods are reviewed. The theoretical basis of human reliability analysis, human error mechanism, the key elements of HRA methods as well as the existing HRA methods are respectively introduced and assessed. Their shortcomings,the current research hotspot and difficult problems are identified. Finally, it takes a close look at the trends of human reliability analysis methods. (authors)

Development of FBR visual inspection technique in sodium

International Nuclear Information System (INIS)

Suzuki, T.; Nagai, S.; Shioyama, T.; Sato, M.; Karasawa, H.; Maruyama, F.; Ota, S.; Hida, T.; Kai, M.

1995-01-01

Because the reactor vessel of Fast Breeder Reactor is filled with opaque liquid sodium, it is expected to develop an acoustic visual inspection technique in sodium. The acoustic 3 dimensional image processing technique and the elemental parts of the visual inspection equipment in sodium have been developed at the first stage of the in-sodium visual inspection technique development. The cross correlation processing has been applied to improve the S/N ratio in the acoustic echo that are deteriorated by wetting in sodium and the low sensitivity that are also deteriorated by rather smaller diameter to integrate the high density multiple acoustic sensors. The improvement of S/N ratio has been realized by the cross correlation between acoustic echo data that is reflected from the objects and M-series continuous wave that is transmitted from the acoustic transducer. The high speed parallel processing circuits, in which DSPs (Digital Signal Processors) are included, have been developed to realize high speed processing by employing (the circuits connected to) each of sensors in parallel. Synthetic Aperture Focussing Technique (SAFT) has been applied to the acoustic 3-dimensional image processing. The amounts of ellipsoids must be drawn into the 3-dimensional memory to compose the 3-dimensional image by SAFT. Then, a high performance work-station has been employed to deal with enormous data to compose the acoustic 3 dimensional image. Motors and cables, which can be operated under the condition of high-temperature and high-radiation environment, have been developed as the parts of the manipulator which will be used for visual inspection equipment in sodium. A prototype drive mechanism consists of the manipulator with three joints and a scanner with an arrayed acoustic sensors which a sweeps in fan-shape mechanically. The manipulatory type prototype drive mechanism and the signal processing device have been developed and tested, and the acoustic 3-dimensional image of pyramid

The development of eye tracking in aviation (ETA) technique to investigate pilot's cognitive processes of attention and decision-making

OpenAIRE

Li, Wen-Chin; Lin, John J. H.; Braithwaite, Graham; Greaves, Matt

2016-01-01

Eye tracking device had provided researchers a promising way to investigate what pilot‘s cognitive processes when they see information present on the flight deck. There are 35 participants consisted by pilots and avionics engineers participated in current research. The research apparatus include an eye tracker and a flight simulator divided by five AOIs for data collection. The research aims are to develop cost-efficiency of eye tracking technique in order to facilitate scientific research of...

Beyond simple small-angle X-ray scattering: developments in online complementary techniques and sample environments.

Science.gov (United States)

Bras, Wim; Koizumi, Satoshi; Terrill, Nicholas J

2014-11-01

Small- and wide-angle X-ray scattering (SAXS, WAXS) are standard tools in materials research. The simultaneous measurement of SAXS and WAXS data in time-resolved studies has gained popularity due to the complementary information obtained. Furthermore, the combination of these data with non X-ray based techniques, via either simultaneous or independent measurements, has advanced understanding of the driving forces that lead to the structures and morphologies of materials, which in turn give rise to their properties. The simultaneous measurement of different data regimes and types, using either X-rays or neutrons, and the desire to control parameters that initiate and control structural changes have led to greater demands on sample environments. Examples of developments in technique combinations and sample environment design are discussed, together with a brief speculation about promising future developments.

Research and development

Energy Technology Data Exchange (ETDEWEB)

Harlow, Jr, J G

1977-09-01

The need for increased research and development programs to provide technological advances to meet future energy demands, particularly electric power demands, is discussed. It is concluded that the future energy needs of the world can only be supplied through technological improvements. The cost of these technological improvements can be minimized by cooperative, unified research and development programs. The financial support of the energy industry, the equipment manufacturing industry and the consumer will be required to finance these vital developments. The energy problems of the world can be solved by an adequately financed unified R and D effort. The U.S. must assume a major role of leadership in this world-wide effort. (LCL)

Mosquito Control Techniques Developed for the US Military

Science.gov (United States)

The USDA developed and field tested new techniques to reduce the risk to deployed military troops from vector-borne diseases. Some of the methods developed included (1) novel military personal protection methods, (2) barrier treatments of artificial materials and natural vegetation, and (3) ground a...

Developing DIVE, a design-led futures technique for SMEs

NARCIS (Netherlands)

Mejia Sarmiento, J.R.; Pasman, G.J.; Hultink, H.J.; Stappers, P.J.; Vogel, C.; Muratovski, G.

2017-01-01

Futures techniques have long been used in large enterprises as designerly means to explore the future and guide innovation. In the automotive industry, for instance, the development of concept cars is a technique which has repeatedly proven its value. However, while big companies have broadly

Moroccan TRIGA nuclear reactor, an important tool for the development of research, education and training

International Nuclear Information System (INIS)

Caoui, A.

2011-01-01

Full text: The construction of the Nuclear Research Center of Maamora (NRCM) will enable to the National Center for Nuclear Energy, Sciences and Techniques (CNESTEN) to fulfill its missions for promotion of nuclear techniques in socioeconomic fields, act as technical support for the authorities, and contribute to the introduction of nuclear power for electricity generation considered in the new energy strategy as alternative option for the period 2020-2030. The CNESTEN has commisioned its nuclear research reactor Triga Mark II of 2000 KW on 2007 for wich the operating authorization was delivered on 2009. This research reactor is the keystone structure of the NRCM, its existing and planed utilization include: production of radioisotopes for medical use, neutron activation analysis, non-destructive examination techniques, neutron scattering, reactor physics research and training. In term of human ressources development, CNESTEN is more focusing on education and training for wich an international training Center is under development. The TRIGA research reactor will be an important component of this center. In order to promote the utilization of the reserch reactor in socio-economical sectors at national level, CNESTEN organizea meetings, schools and conferences around each of the reactor applications, and offers the opportunity to researchers, students, socio-economic operators to know more about reactor utilization within scientific visits, courses and training programs. At the international level, CNESTEN strengthens its international partenership. The regional and international cooperation with IAEA, AFRA and bilateral parteners (USA, France), constitutes the platform for capacity building in different areas of CNESTEN RIGA research reactor utilization

New Developments and special NDT techniques

International Nuclear Information System (INIS)

Mundry, E.

1978-01-01

New developments in measuring methods using non-destructive testing are reported. The following are discussed in various chapters: a) Mechanical and acoustic methods, b) thermal and optical methods, c) electric and magnetic methods, d) X-ray and gamma radiation methods, e) particle methods or particle radiation. Finally, method techniques are explained. An extensive bibliography (210 quotations) supplement the work. (RW) [de

Integrated design optimization research and development in an industrial environment

Science.gov (United States)

Kumar, V.; German, Marjorie D.; Lee, S.-J.

1989-01-01

An overview is given of a design optimization project that is in progress at the GE Research and Development Center for the past few years. The objective of this project is to develop a methodology and a software system for design automation and optimization of structural/mechanical components and systems. The effort focuses on research and development issues and also on optimization applications that can be related to real-life industrial design problems. The overall technical approach is based on integration of numerical optimization techniques, finite element methods, CAE and software engineering, and artificial intelligence/expert systems (AI/ES) concepts. The role of each of these engineering technologies in the development of a unified design methodology is illustrated. A software system DESIGN-OPT has been developed for both size and shape optimization of structural components subjected to static as well as dynamic loadings. By integrating this software with an automatic mesh generator, a geometric modeler and an attribute specification computer code, a software module SHAPE-OPT has been developed for shape optimization. Details of these software packages together with their applications to some 2- and 3-dimensional design problems are described.

KfK, Institute for Reactor Development. Results of research and development activities in 1990

International Nuclear Information System (INIS)

1991-03-01

R and D activities at IRE (Institut fuer Reaktorentwicklung-Institute for Reactor Development) are dedicated to power engineering and handling processes in the framework of the point-of-main-effort projects 'nuclear fusion', 'solid-state and materials research', 'handling', 'nuclear safety' and 'miscellaneous research'. Nuclear fusion contributions deal with special vacuum system design problems, heavy-duty design and materials selection and safety aspects. Specimens from 30 different carbon-based materials were subjected to comparative tests in a plasma spraying plant. In the framework of solid-state and materials research activities a viscoplastic model for mechanical component analysis was investigated for its compatibility with elementary physical laws under complex loads. The handling project was dedicated to the specific requirements of nuclear fusion with regard to JET and NET uses, the development of system solutions for flexible industrial techniques, and to standardization. A study on the control system of a work station for NET remote handling tasks was completed. In the framework of the nuclear safety project one currently investigates the dynamics of fast reactors under failure conditions, the possible propagation of local cooling failures in the reactor core, and core monitoring problems. (orig./GL) [de

Nuclear techniques for sustainable development: Water resources and monitoring environmental pollution

International Nuclear Information System (INIS)

Danesi, P.R.

1993-01-01

At the IAEA's Laboratories in Seibersdorf and Vienna, Austria, problems of water supply and pollution are some of the important environmental topics that scientists are addressing. Through a broad range of scientific and technical projects and services, the Laboratories develop and transfer technologies with important environmental applications, particularly in developing countries. The broad range of activities include assessments of water resources and their possible contamination, and sensitive analytical studies of toxic metals, pesticides, and other environmental pollutants. The work frequently involves using analytical methods based on radiation and isotopes ranging from neutron activation analysis and X-ray fluorescence to atomic absorption spectrometry and tracer techniques. This article - the second of a two-part series - presents a selective overview of activities at the IAEA's Seibersdorf Laboratories contributing to efforts for a sustainable development. In many cases, the Laboratories serve as the institutional centre for research networks involving scientists at analytical laboratories around the world

Nuclear techniques in the coal industry. Proceedings of a final research co-ordination meeting

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-11-01

With the aim of promoting advanced research and facilitating a more extensive application of nuclear techniques for environmental protection in the exploration and exploitation of coal, the IAEA established the present co-ordinated research programme (CRP) in 1989. This report includes an assessment of the current status and trends in nuclear techniques in the coal industry and the results obtained by the participants at the CRP. Proceedings of the final CRP on ``Nuclear Techniques in Exploration and Exploitation of Coal: On-line and Bulk Analysis and Evaluation of Potential Environmental Pollutants in Coal and Coke``, was held in Krakow, Poland, from 9 to 12 May 1994. Refs, figs, tabs.

TECHNIQUES AND FACTORS CONTRIBUTING TO DEVELOPING CRITICAL THINKING SKILLS

Directory of Open Access Journals (Sweden)

Irina Vladimirovna Glukhova

2015-01-01

Full Text Available The paper deals with the issue of working out and introduction in educational process of higher educational institutions of the innovative technology for developing skills of critical thinking skills of the future specialists. Research is aimed at revealing of the factors promoting formation of students’ critical thinking in high schools; the search of strategy and the receptions actualizing creative abilities of students and helping to formation of an active, independent person. The author gives the reasoned proving that it’s necessary to set up the creative educational environment and adjustment of positive dialogue between the teacher and the trainee for education of such person, development of abilities of an objective reflection, interpretation of the phenomena, formulations of adequate conclusions, well-founded evaluating. Methods. The methods involve the analysis of the philosophical, psychology-pedagogical, methodical literature and the scientific periodical publications; generalisation of the Russian and foreign background, classification and arrangement of the considered issues, supervision. Results. Current approaches to the rendering of critical thinking and a problem of its formation in the scientific literature are considered; the concept «the creative educational environment» is specified; the ways of increasing the educational process efficiency are shown. Scientific novelty. The complex of procedures and the conditions promoting effective development of critical thinking skills is theoretically proved on the basis of the analysis of various information sources. Practical significance. The research outcomes and the recommended methods of critical thinking skills formation can be useful for the professors and lecturers of higher education institutions to optimize subject matter selection, techniques and methods of education under the conditions of dynamically updated educational process. 

Development of tactile floor plan for the blind and the visually impaired by 3D printing technique

Directory of Open Access Journals (Sweden)

Raša Urbas

2016-07-01

Full Text Available The aim of the research was to produce tactile floor plans for blind and visually impaired people for the use in the museum. For the production of tactile floor plans 3D printing technique was selected among three different techniques. 3D prints were made of white and colored ABS polymer materials. Development of different elements of tactile floor plans, as well as the problems and the solutions during 3D printing, are described in the paper.

2010-11 Research Portfolio: Research & Development Division

Science.gov (United States)

Educational Testing Service, 2010

2010-01-01

This document describes the breadth of the research that the ETS (Educational Testing Service) Research & Development division is conducting in 2010. This portfolio will be updated in early 2011 to reflect changes to existing projects and new projects that were added after this document was completed. The research described in this portfolio falls…

Quality Attribute Techniques Framework

Science.gov (United States)

Chiam, Yin Kia; Zhu, Liming; Staples, Mark

The quality of software is achieved during its development. Development teams use various techniques to investigate, evaluate and control potential quality problems in their systems. These “Quality Attribute Techniques” target specific product qualities such as safety or security. This paper proposes a framework to capture important characteristics of these techniques. The framework is intended to support process tailoring, by facilitating the selection of techniques for inclusion into process models that target specific product qualities. We use risk management as a theory to accommodate techniques for many product qualities and lifecycle phases. Safety techniques have motivated the framework, and safety and performance techniques have been used to evaluate the framework. The evaluation demonstrates the ability of quality risk management to cover the development lifecycle and to accommodate two different product qualities. We identify advantages and limitations of the framework, and discuss future research on the framework.

A Translator Verification Technique for FPGA Software Development in Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Kim, Jae Yeob; Kim, Eui Sub; Yoo, Jun Beom [Konkuk University, Seoul (Korea, Republic of)

2014-10-15

Although the FPGAs give a high performance than PLC (Programmable Logic Controller), the platform change from PLC to FPGA impose all PLC software engineers give up their experience, knowledge and practices accumulated over decades, and start a new FPGA-based hardware development from scratch. We have researched to fine the solution to this problem reducing the risk and preserving the experience and knowledge. One solution is to use the FBDtoVerilog translator, which translates the FBD programs into behavior-preserving Verilog programs. In general, the PLCs are usually designed with an FBD, while the FPGAs are described with a HDL (Hardware Description Language) such as Verilog or VHDL. Once PLC designer designed the FBD programs, the FBDtoVerilog translates the FBD into Verilog, mechanically. The designers, therefore, need not consider the rest of FPGA development process (e.g., Synthesis and Place and Routing) and can preserve the accumulated experience and knowledge. Even if we assure that the translation from FBD to Verilog is correct, it must be verified rigorously and thoroughly since it is used in nuclear power plants, which is one of the most safety critical systems. While the designer develops the FPGA software with the FBD program translated by the translator, there are other translation tools such as synthesis tool and place and routing tool. This paper also focuses to verify them rigorously and thoroughly. There are several verification techniques for correctness of translator, but they are hard to apply because of the outrageous cost and performance time. Instead, this paper tries to use an indirect verification technique for demonstrating the correctness of translator using the co-simulation technique. We intend to prove only against specific inputs which are under development for a target I and C system, not against all possible input cases.

A Translator Verification Technique for FPGA Software Development in Nuclear Power Plants

International Nuclear Information System (INIS)

Kim, Jae Yeob; Kim, Eui Sub; Yoo, Jun Beom

2014-01-01

Although the FPGAs give a high performance than PLC (Programmable Logic Controller), the platform change from PLC to FPGA impose all PLC software engineers give up their experience, knowledge and practices accumulated over decades, and start a new FPGA-based hardware development from scratch. We have researched to fine the solution to this problem reducing the risk and preserving the experience and knowledge. One solution is to use the FBDtoVerilog translator, which translates the FBD programs into behavior-preserving Verilog programs. In general, the PLCs are usually designed with an FBD, while the FPGAs are described with a HDL (Hardware Description Language) such as Verilog or VHDL. Once PLC designer designed the FBD programs, the FBDtoVerilog translates the FBD into Verilog, mechanically. The designers, therefore, need not consider the rest of FPGA development process (e.g., Synthesis and Place and Routing) and can preserve the accumulated experience and knowledge. Even if we assure that the translation from FBD to Verilog is correct, it must be verified rigorously and thoroughly since it is used in nuclear power plants, which is one of the most safety critical systems. While the designer develops the FPGA software with the FBD program translated by the translator, there are other translation tools such as synthesis tool and place and routing tool. This paper also focuses to verify them rigorously and thoroughly. There are several verification techniques for correctness of translator, but they are hard to apply because of the outrageous cost and performance time. Instead, this paper tries to use an indirect verification technique for demonstrating the correctness of translator using the co-simulation technique. We intend to prove only against specific inputs which are under development for a target I and C system, not against all possible input cases

Advanced analytical techniques

International Nuclear Information System (INIS)

Mrochek, J.E.; Shumate, S.E.; Genung, R.K.; Bahner, C.T.; Lee, N.E.; Dinsmore, S.R.

1976-01-01

The development of several new analytical techniques for use in clinical diagnosis and biomedical research is reported. These include: high-resolution liquid chromatographic systems for the early detection of pathological molecular constituents in physiologic body fluids; gradient elution chromatography for the analysis of protein-bound carbohydrates in blood serum samples, with emphasis on changes in sera from breast cancer patients; electrophoretic separation techniques coupled with staining of specific proteins in cellular isoenzymes for the monitoring of genetic mutations and abnormal molecular constituents in blood samples; and the development of a centrifugal elution chromatographic technique for the assay of specific proteins and immunoglobulins in human blood serum samples

Development of Measurement Techniques For Strengthening Nuclear Safeguards

International Nuclear Information System (INIS)

Badawy, I.

2007-01-01

The strategy of nuclear safeguards is based on the accounting and control of nuclear materials, nuclear technologies and activities in a State in order to attain its ''Legal'' goals of the application of atomic energy. The present paper investigates the development in the measurement techniques used in the verification and control of NMs for the purpose of strengthening safeguards. Its focus is to review the recent nuclear measurement techniques used for the identification and verification of nuclear materials.The different levels of verification and the accuracy of these techniques are discussed. The implementation of stregthened safeguards; and nuclear materials verification and control in the world are mentioned. Also, the recently proposed measures to enhance the ability to detect undeclared nuclear materials, nuclear activities and facilities that would need advanced measurement techniques are indicated.

Report of results on the research and development work 1979 of the Institute for Technical Chemistry

International Nuclear Information System (INIS)

1980-02-01

The results report on the research and development work in 1979 carried out at the Institute for Technical Physics of the Nuclear Research Centre, Karlsruhe is concerned here. The main field of this development work is the research into superconducting magnets for fusion reactors. Studies are published on the material, processing and shape of these magnets. Furthermore, a report is given on fusion magnet technology, superconducting fundamentals and technical superconductors, as well as an cryonergy technique and cryotechnique. (KBI) [de

Involute Spur Gear Template Development by Parametric Technique ...

African Journals Online (AJOL)

There are many methods available for developing profiles of gear and spline teeth. Most of the techniques are inaccurate because they use only an approximation of the involute curve profile. The parametric method developed in this paper provides accurate involute curve creation using formulas and exact geometric ...

Research and development and industrial informatization

International Nuclear Information System (INIS)

1995-08-01

This book deals with research and development and industrial informatization with development of technology international trend, the present conditions of scientific technology in the major nations, politics of technical development and trend, process of national research and development, research for industrial research and development, strengthen cooperation for scientific technology among nations, current situation and development of technology by field such as energy, software and system, and technology for industrial informatization.

PREFACE: 14th International Workshop on Advanced Computing and Analysis Techniques in Physics Research (ACAT 2011)

Science.gov (United States)

Teodorescu, Liliana; Britton, David; Glover, Nigel; Heinrich, Gudrun; Lauret, Jérôme; Naumann, Axel; Speer, Thomas; Teixeira-Dias, Pedro

2012-06-01

ACAT2011 This volume of Journal of Physics: Conference Series is dedicated to scientific contributions presented at the 14th International Workshop on Advanced Computing and Analysis Techniques in Physics Research (ACAT 2011) which took place on 5-7 September 2011 at Brunel University, UK. The workshop series, which began in 1990 in Lyon, France, brings together computer science researchers and practitioners, and researchers from particle physics and related fields in order to explore and confront the boundaries of computing and of automatic data analysis and theoretical calculation techniques. It is a forum for the exchange of ideas among the fields, exploring and promoting cutting-edge computing, data analysis and theoretical calculation techniques in fundamental physics research. This year's edition of the workshop brought together over 100 participants from all over the world. 14 invited speakers presented key topics on computing ecosystems, cloud computing, multivariate data analysis, symbolic and automatic theoretical calculations as well as computing and data analysis challenges in astrophysics, bioinformatics and musicology. Over 80 other talks and posters presented state-of-the art developments in the areas of the workshop's three tracks: Computing Technologies, Data Analysis Algorithms and Tools, and Computational Techniques in Theoretical Physics. Panel and round table discussions on data management and multivariate data analysis uncovered new ideas and collaboration opportunities in the respective areas. This edition of ACAT was generously sponsored by the Science and Technology Facility Council (STFC), the Institute for Particle Physics Phenomenology (IPPP) at Durham University, Brookhaven National Laboratory in the USA and Dell. We would like to thank all the participants of the workshop for the high level of their scientific contributions and for the enthusiastic participation in all its activities which were, ultimately, the key factors in the

High Penetration Photovoltaic Power Electronics and Energy Management Technology Research, Development and Demonstration: Cooperative Research and Development Final Report, CRADA Number CRD-13-517

Energy Technology Data Exchange (ETDEWEB)

Hudgins, Andrew P. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2018-01-25

Advanced Energy Industries, Inc., will partner with DOE's National Renewable Energy Laboratory (NREL) to conduct research and development to demonstrate technologies that will increase the penetration of photovoltaic (PV) technologies for commercial and utility applications. Standard PV power control systems use simple control techniques that only provide real power to the grid. A focus of this partnership is to demonstrate how state of the art control and power electronic technologies can be combined to create a utility interactive control platform.

[From fundamental research to clinical development: a review of orthodontics].

Science.gov (United States)

Zhao, Zhi-he; Bai, Ding

2011-11-01

In recent years, new approaches to the diagnosis and treatment of malocclusion have emerged. The diagnostic and therapeutic techniques of orthodontics have evolved from two dimensions to five dimensions with the development of computer technology, auto-machining and imaging. Furthermore, interdisciplinary study has become the driving force for the advancement of fundamental research in orthodontics. The mechanisms of malocclusion and orthodontic tooth movement have been extensively studied to the details at the level of cells and molecules.

The Optical Flow Technique on the Research of Solar Non-potentiality

Science.gov (United States)

Liu, Ji-hong; Zhang, Hong-qi

2010-06-01

Several optical flow techniques, which have being applied to the researches of solar magnetic non-potentiality recently, have been summarized here. And a few new non-potential parameters which can be derived from them have been discussed, too. The main components of the work are presented as follows: (1) The optical flow techniques refers to a series of new image analyzing techniques arisen recently on the researches of solar magnetic non-potentiality. They mainly include LCT (local correlation tracking), ILCT (inductive equation combining with LCT), MEF (minimum energy effect), DAVE (differential affine velocity estimator) and NAVE (nonlinear affine velocity estimator). Their calculating and applying conditions, merits and deficiencies, all have been discussed detailedly in this work. (2) Benefit from the optical flow techniques, the transverse velocity fields of the magnetic features on the solar surface may be determined by a time sequence of high-quality images currently produced by high-resolution observations either from the ground or in space. Consequently, several new non-potential parameters may be acquired, such as the magnetic helicity flux, the induced electric field in the photosphere, the non-potential magnetic stress (whose area integration is the Lorentz force), etc. Then we can determine the energy flux across the photosphere, and subsequently evaluate the energy budget. Former works on them by small or special samples have shown that they are probably related closely to the erupting events, such as flare, filament eruptions and coronal mass ejections.

Development of Techniques for Spent Fuel Assay - Differential Dieaway Final Report

International Nuclear Information System (INIS)

Swinhoe, Martyn Thomas; Goodsell, Alison; Ianakiev, Kiril Dimitrov; Iliev, Metodi; Desimone, David J.; Rael, Carlos D.; Henzl, Vladimir; Polk, Paul John

2016-01-01

This report summarizes the work done under a DNDO R&D funded project on the development of the differential dieaway method to measure plutonium in spent fuel. There are large amounts of plutonium that are contained in spent fuel assemblies, and currently there is no way to make quantitative non-destructive assay. This has led NA24 under the Next Generation Safeguards Initiative (NGSI) to establish a multi-year program to investigate, develop and implement measurement techniques for spent fuel. The techniques which are being experimentally tested by the existing NGSI project do not include any pulsed neutron active techniques. The present work covers the active neutron differential dieaway technique and has advanced the state of knowledge of this technique as well as produced a design for a practical active neutron interrogation instrument for spent fuel. Monte Carlo results from the NGSI effort show that much higher accuracy (1-2%) for the Pu content in spent fuel assemblies can be obtained with active neutron interrogation techniques than passive techniques, and this would allow their use for nuclear material accountancy independently of any information from the operator. The main purpose of this work was to develop an active neutron interrogation technique for spent nuclear fuel.

Transcranial magnetic stimulation research on reading and dyslexia: a new clinical intervention technique for treating dyslexia?

Directory of Open Access Journals (Sweden)

Maurits van den Noort

2015-01-01

Full Text Available Nowadays, several noninvasive neuroimaging techniques, including transcranial magnetic stimulation (TMS, exist. The working mechanism behind TMS is a rapidly changing magnetic field that generates an electric current via electromagnetic induction. When the coil is placed on the scalp, the magnetic field generates a physiological reaction in the underlying neural tissue. The TMS-induced change in the participant′s behavior is used by researchers to investigate the causal relations between specific brain areas and cognitive functions such as language. A variant of TMS has been developed, which is called rapid-rate TMS (rTMS. In this review, three databases (Medline, Educational Resources Information Center, and Scopus were searched for rTMS studies on normal reading and dyslexia with a cut-off date of October 31, 2014. rTMS was found to be a valuable tool for investigating questions related to reading research, both on the word and the sentence level. Moreover, it can be successfully used in research on dyslexia. Recently, (high-frequency rTMS has been used as a "clinical" intervention technique for treating dyslexia and for improving reading performance by exciting underactive reading pathways in the brain. Finally, we end the paper with a discussion of future directions in the field of rTMS research and dyslexia, for instance, the promising prospect of combining TMS with simultaneous electroencephalographic imaging.

Academic software development tools and techniques (Report on the 1st Workshop WASDeTT at ECOOP 2008)

NARCIS (Netherlands)

Wuyts, R.; Kienle, H.M.; Mens, K.; Brand, van den M.G.J.; Kuhn, A.; Eugster, P.

2009-01-01

The objective of the 1st International Workshop on Advanced Software Development Tools and Techniques (WASDeTT-1) was to provide interested researchers with a forum to share their tool building experiences and to explore how tools can be built more effectively and efficiently. The theme for this

Research on the improvement of nuclear safety - Development of a technique for simultaneous measurement of particle size and velocity for direct containment heating accident analysis

Energy Technology Data Exchange (ETDEWEB)

Lee, Sang Yong; Song, Si Hong; Koh, Kwang Woong; Kim, Joo Yeon; Kim, Jong Moon; Choi, Chul Jin [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

1995-08-01

The main objective is to develop a high performance software routine to process the output signals from the phase/Doppler device for simultaneous measurement of drop sizes and two-dimensional velocities of spray drops/particles. The present work has been carried out as an extension work of the first year`s research, where the principles and the limitation of this measuring technique have been thoroughly reviewed. In order to verify the performance and reliability of this software for simultaneous measurement of sizes and velocities of spray drops with two-dimensional motions, the results were compared with those from commercial signal processor DSA by Aerometrics, and concluded to be satisfactory. The routine developed throughout this project is applicable not only to the DCH model experiments but also to the measurements of sizes and velocities of drops/particles in combustors, dryers, humidifiers, and in various two-phase equipments. 20 refs., 5 tabs., 21 figs. (author)

Fuzzy Bi-level Decision-Making Techniques: A Survey

Directory of Open Access Journals (Sweden)

Guangquan Zhang

2016-04-01

Full Text Available Bi-level decision-making techniques aim to deal with decentralized management problems that feature interactive decision entities distributed throughout a bi-level hierarchy. A challenge in handling bi-level decision problems is that various uncertainties naturally appear in decision-making process. Significant efforts have been devoted that fuzzy set techniques can be used to effectively deal with uncertain issues in bi-level decision-making, known as fuzzy bi-level decision-making techniques, and researchers have successfully gained experience in this area. It is thus vital that an instructive review of current trends in this area should be conducted, not only of the theoretical research but also the practical developments. This paper systematically reviews up-to-date fuzzy bi-level decisionmaking techniques, including models, approaches, algorithms and systems. It also clusters related technique developments into four main categories: basic fuzzy bi-level decision-making, fuzzy bi-level decision-making with multiple optima, fuzzy random bi-level decision-making, and the applications of bi-level decision-making techniques in different domains. By providing state-of-the-art knowledge, this survey paper will directly support researchers and practitioners in their understanding of developments in theoretical research results and applications in relation to fuzzy bi-level decision-making techniques.

Beyond simple small-angle X-ray scattering: developments in online complementary techniques and sample environments

Directory of Open Access Journals (Sweden)

Wim Bras

2014-11-01

Full Text Available Small- and wide-angle X-ray scattering (SAXS, WAXS are standard tools in materials research. The simultaneous measurement of SAXS and WAXS data in time-resolved studies has gained popularity due to the complementary information obtained. Furthermore, the combination of these data with non X-ray based techniques, via either simultaneous or independent measurements, has advanced understanding of the driving forces that lead to the structures and morphologies of materials, which in turn give rise to their properties. The simultaneous measurement of different data regimes and types, using either X-rays or neutrons, and the desire to control parameters that initiate and control structural changes have led to greater demands on sample environments. Examples of developments in technique combinations and sample environment design are discussed, together with a brief speculation about promising future developments.

User Interface Developed for Controls/CFD Interdisciplinary Research

Science.gov (United States)

1996-01-01

The NASA Lewis Research Center, in conjunction with the University of Akron, is developing analytical methods and software tools to create a cross-discipline "bridge" between controls and computational fluid dynamics (CFD) technologies. Traditionally, the controls analyst has used simulations based on large lumping techniques to generate low-order linear models convenient for designing propulsion system controls. For complex, high-speed vehicles such as the High Speed Civil Transport (HSCT), simulations based on CFD methods are required to capture the relevant flow physics. The use of CFD should also help reduce the development time and costs associated with experimentally tuning the control system. The initial application for this research is the High Speed Civil Transport inlet control problem. A major aspect of this research is the development of a controls/CFD interface for non-CFD experts, to facilitate the interactive operation of CFD simulations and the extraction of reduced-order, time-accurate models from CFD results. A distributed computing approach for implementing the interface is being explored. Software being developed as part of the Integrated CFD and Experiments (ICE) project provides the basis for the operating environment, including run-time displays and information (data base) management. Message-passing software is used to communicate between the ICE system and the CFD simulation, which can reside on distributed, parallel computing systems. Initially, the one-dimensional Large-Perturbation Inlet (LAPIN) code is being used to simulate a High Speed Civil Transport type inlet. LAPIN can model real supersonic inlet features, including bleeds, bypasses, and variable geometry, such as translating or variable-ramp-angle centerbodies. Work is in progress to use parallel versions of the multidimensional NPARC code.

Radioactive ion beams and techniques for solid state research

International Nuclear Information System (INIS)

Correia, J.G.

1998-01-01

In this paper we review the most recent and new applications of solid state characterization techniques using radioactive ion beams. For such type ofresearch, high yields of chemically clean ion beams of radioactive isotopesare needed which are provided by the on-line coupling of high resolution isotope separators to particle accelerators, such as the isotope separator on-line (ISOLDE) facility at CERN. These new experiments are performed by an increasing number of solid state groups. They combine nuclear spectroscopic techniques such as Moessbauer, perturbed angular correlations (PAC) and emission channeling with the traditional non-radioactive techniques liked deep level transient spectroscopy (DLTS) and Hall effect measurements. Recently isotopes of elements, not available before, were successfully used in new PAC experiments, and the first photoluminescence (PL) measurements, where the element transmutation plays the essential role on the PL peak identification, have been performed. The scope of applications of radioactive ion beams for research in solid state physics will be enlarged in the near future, with the installation at ISOLDE of a post-accelerator device providing radioactive beams with energies ranging from a few keV up to a few MeV. (orig.)

Combined neutron activation analysis techniques for multiple purposes at Portuguese research reactor

International Nuclear Information System (INIS)

Dung, H.M.; Freitas, M.C.; Beasley, D.; Almeida, S.M.; Dionisio, I; Canha, N.H.; Galinha, C.; Marques, J.G.

2010-01-01

Full text: Developments of the neutron activation analysis (NAA) techniques using Compton suppression system (CSS), fast pneumatic irradiation facility (SIPRA), epithermal neutron and automatic sample changers (ASCs) associated with the traditional NAA for trace element determination in various sample types are described with reference to specific conditions at the 1 MW Portuguese research reactor (RPI). Experiences in application of k o -IAEA software for data processing in order to deduce the results are also discussed. A selected number of sample types which are intended to the application in biological and environmental areas as well as industrial and material samples are demonstrated which provide challenges in the irradiation, measurement and the interpretation of data to which in most cases a combined solution should be made. The role that each NAA technique can play in the combined scheme along with their optimized characteristics has been studied and shown. The combined NAA techniques at RPI established for on-going and potential projects as well as analysis service with respect to the element scope (48), typically Ag, Al, As, Au, Ba, Br, Ca, Cd, Ce, CI, Co, Cr, Cs, Cu, Dy, Er, Eu, F, Fe, Ga, Hf, Hg, I, In, K, La, Mg, Mn, Mo, Na, Rb, Sb, Sc, Se, Si, Sm, Sn, Sr, Ta, Tb, Th, Ti, U, V, W, Vb, Zn and Zr along with detection limits, accuracies and precision's have been evaluated as a trace analysis method meeting the requirements of the intended applications

DEVELOPMENT OF A VIRTUAL INTELLIGENCE TECHNIQUE FOR THE UPSTREAM OIL INDUSTRY

Energy Technology Data Exchange (ETDEWEB)

Iraj A. Salehi; Shahab D. Mohaghegh; Samuel Ameri

2004-09-01

The objective of the research and development work reported in this document was to develop a Virtual Intelligence Technique for optimization of the Preferred Upstream Management Practices (PUMP) for the upstream oil industry. The work included the development of a software tool for identification and optimization of the most influential parameters in upstream common practices as well as geological, geophysical and reservoir engineering studies. The work was performed in cooperation with three independent producing companies--Newfield Exploration, Chesapeake Energy, and Triad Energy--operating in the Golden Trend, Oklahoma. In order to protect data confidentiality, these companies are referred to as Company One, Two, Three in a randomly selected order. These producing companies provided geological, completion, and production data on 320 wells and participated in frequent technical discussions throughout the project. Research and development work was performed by Gas Technology Institute (GTI), West Virginia University (WVU), and Intelligent Solutions Inc. (ISI). Oklahoma Independent Petroleum Association (OIPA) participated in technology transfer and data acquisition efforts. Deliverables from the project are the present final report and a user-friendly software package (Appendix D) with two distinct functions: a characterization tool that identifies the most influential parameters in the upstream operations, and an optimization tool that seeks optimization by varying a number of influential parameters and investigating the coupled effects of these variations. The electronic version of this report is also included in Appendix D. The Golden Trend data were used for the first cut optimization of completion procedures. In the subsequent step, results from soft computing runs were used as the guide for detailed geophysical and reservoir engineering studies that characterize the cause-and-effect relationships between various parameters. The general workflow and the main

7 CFR 917.39 - Production research, market research and development.

Science.gov (United States)

2010-01-01

... establish or provide for the establishment of production research, marketing research, and development... 7 Agriculture 8 2010-01-01 2010-01-01 false Production research, market research and development...) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF...

Resolution enhancement techniques in microscopy

Science.gov (United States)

Cremer, Christoph; Masters, Barry R.

2013-05-01

We survey the history of resolution enhancement techniques in microscopy and their impact on current research in biomedicine. Often these techniques are labeled superresolution, or enhanced resolution microscopy, or light-optical nanoscopy. First, we introduce the development of diffraction theory in its relation to enhanced resolution; then we explore the foundations of resolution as expounded by the astronomers and the physicists and describe the conditions for which they apply. Then we elucidate Ernst Abbe's theory of optical formation in the microscope, and its experimental verification and dissemination to the world wide microscope communities. Second, we describe and compare the early techniques that can enhance the resolution of the microscope. Third, we present the historical development of various techniques that substantially enhance the optical resolution of the light microscope. These enhanced resolution techniques in their modern form constitute an active area of research with seminal applications in biology and medicine. Our historical survey of the field of resolution enhancement uncovers many examples of reinvention, rediscovery, and independent invention and development of similar proposals, concepts, techniques, and instruments. Attribution of credit is therefore confounded by the fact that for understandable reasons authors stress the achievements from their own research groups and sometimes obfuscate their contributions and the prior art of others. In some cases, attribution of credit is also made more complex by the fact that long term developments are difficult to allocate to a specific individual because of the many mutual connections often existing between sometimes fiercely competing, sometimes strongly collaborating groups. Since applications in biology and medicine have been a major driving force in the development of resolution enhancing approaches, we focus on the contribution of enhanced resolution to these fields.

Available post-irradiation examination techniques at Romanian institute for nuclear research

International Nuclear Information System (INIS)

Parvan, Marcel; Sorescu, Antonius; Mincu, Marin; Uta, Octavian; Dobrin, Relu

2005-01-01

The Romanian Institute for Nuclear Research (INR) has a set of nuclear facilities consisting of TRIGA 14 MW(th) materials testing reactor and LEPI (Romanian acronym for post-irradiation examination laboratory) which enable to investigate the behaviour of the nuclear fuel and materials under various irradiation conditions. The available techniques of post-irradiation examination (PIE) and purposes of PIE for CANDU reactor fuel are as follows. 1) Visual inspection and photography by periscope: To examine the surface condition such as deposits, corrosion etc. 2) Eddy current testing: To verify the cladding integrity. 3) Profilometry and length measurement performed both before and after irradiation: To measure the parameters which highlight the dimensional changes i.e. diameter, length, diametral and axial sheath deformation, circumferential sheath ridging height, bow and ovality. 4) Gamma scanning and Tomography: To determine the burnup, axial and radial fission products activity distribution and to check for flux peaking and loading homogeneity. 5) Puncture test: To measure the pressure, volume and composition of fission gas and the inner free volume. 6) Optical microscopy: To highlight the structural changes and hydriding, to examine the condition of the fuel-sheath interface and to measure the oxide thickness and Vickers microhardness. 7) Mass spectrometry: To measure the burnup. 8) Tensile testing: To check the mechanical properties. So far, non-destructive and destructive post-irradiation examinations have been performed on a significant number of CANDU fuel rods (about 100) manufactured by INR and irradiated to different power histories in the INR 14 MW(th) TRIGA reactor. These examinations have been performed as part of the Romanian research programme for the manufacturing, development and safety of the CANDU fuel. The paper describes the PIE techniques and some results. (Author)

Motion Transplantation Techniques: A Survey

NARCIS (Netherlands)

van Basten, Ben; Egges, Arjan

2012-01-01

During the past decade, researchers have developed several techniques for transplanting motions. These techniques transplant a partial auxiliary motion, possibly defined for a small set of degrees of freedom, on a base motion. Motion transplantation improves motion databases' expressiveness and

Research and development of the industrial basic technologies of the next generation, 'composite materials (metal-based)'. Evaluation of the second phase research and development; Jisedai sdangyo kiban gijutsu kenkyu kaihatsu 'fukugo zairyo (kinzoukei)'. Dainiki kenkyu kaihatsu hyoka

Energy Technology Data Exchange (ETDEWEB)

NONE

1986-03-31

The results of the second phase research and development project for developing the metal-based composite materials as the basic technologies of the next generation are evaluated. For development of highly functional materials, the efforts are directed to modification of PAN-based high-strength carbon fibers for aluminum-based FRMs, and also to development of the methods for controlling interfacial reactions at high temperature by modification of the base materials for titanium-based FRMs. For development of carbon fiber-based intermediate materials, the techniques are developed for continuous production of wire preforms of aluminum. For development of molding/processing techniques, the press molding and powder HIP molding techniques are developed to give a planar product of the FRM of titanium alloy reinforced with evaporated filaments of silicon carbide, which shows an average tensile strength exceeding the target level. Also developed are the press and roll molding techniques for the wire preforms of aluminum reinforced with silicon carbide fibers, the planar product therefrom showing a tensile strength of at least 99% of the base material. It is concluded that the objectives of the second-phase project are almost achieved. (NEDO)

mobile phone interaction techniques for rural economy development

African Journals Online (AJOL)

DJFLEX

presented. KEY WORDS: Interaction Techniques, Mobile phone, User Interface, ICT, Rural Development. ... and services must be designed to use available facilities ... detachable memory cards. .... access health information from the Internet.

Evaluating research impact: the development of a ‘RESEARCH for IMPACT’ TOOL

Directory of Open Access Journals (Sweden)

Komla Tsey

2016-08-01

Full Text Available Introduction: This paper describes the development of a ‘Research for Impact’ Tool against a background of concerns about the over-researching of Aboriginal and Torres Strait Islander people’s issues without demonstrable benefits.Material and Methods: A combination of literature reviews, workshops with researchers and reflections by project team members and partners using participatory snowball techniques.Results: Assessing research impact is difficult, akin to so-called ‘wicked problem’, but not impossible. Heuristic and collaborative approach to research that takes in the expectations of research users, those being researched and the funders of research offers a pragmatic solution to evaluating research impact. The proposed ‘Research for Impact’ Tool is based on the understanding that the value of research is to create evidence and/or products to support smarter decisions so as to improve the human condition.Research is of limited value unless the evidence produced is used to inform smarter decisions. A practical way of approaching research impact is therefore to start with the decisions confronting decision makers whether they are government policymakers, professional practitioners or households and the extent to which the research supports smarter decisions and the knock-on consequences of such smart decisions. Embedded at each step in the impact planning, monitoring and evaluation process is the need for Indigenous leadership and participation, capacity enhancement and collaborative partnerships and participatory learning by doing approaches across partners.Discussion: The tool is designed in the context of Indigenous research but the basic idea that the way to assess research impact is to start upfront by defining the users’ of research and their information needs, the decisions confronting them and the extent to which research informs smarter decisions is equally applicable to research in other settings, both applied and

The development of human factors technologies -The development of human factors experimental evaluation techniques-

International Nuclear Information System (INIS)

Shim, Bong Sik; Oh, In Suk; Cha, Kyung Hoh; Lee, Hyun Chul

1995-07-01

In this year, we studied the followings: 1) Development of operator mental workload evaluation techniques, 2) Development of a prototype for preliminary human factors experiment, 3) Suitability test of information display on a large scale display panel, 4) Development of guidelines for VDU-based control room design, 5) Development of integrated test facility (ITF). 6) Establishment of an eye tracking system, and we got the following results: 1) Mental workload evaluation techniques for MMI evaluation, 2) PROTOPEX (PROTOtype for preliminary human factors experiment) for preliminary human factors experiments, 3) Usage methods of APTEA (Analysis-Prototyping-Training-Experiment-Analysis) experiment design, 4) Design guidelines for human factors verification, 5) Detail design requirements and development plan of ITF, 6) Eye movement measurement system. 38 figs, 20 tabs, 54 refs. (Author)

Development of a coating technique for inertial confinement fusion plastic targets

International Nuclear Information System (INIS)

Kubo, U.; Tsubakihara, H.

1986-01-01

Deuterated polystyrene as a target material offers several advantages over other polymers because of the following: (1) it is chemically and physically stable at ordinary conditions, (2) it can be easily formed into spherical shells, and (3) it has a very high fraction of D 2 /H 2 (above approx.99%). As in our previous studies, the fabrication method was basically a utilization of the emulsion technique. This method is well suited to mass-producing the polymer targets without microprocessing techniques. We have developed a fabrication method for single shell targets and an extension of this technique also enables us to fabricate double shell targets. This new method is faster and less labor intensive than previous techniques. The development of ICF experiments requires multilayer structure targets; we have developed, moreover, a new fabrication technique called the multicoating method. The polymer coating can be fabricated by the application of an emulsion technique. On the other hand, with metal coating, a nonelectroplating method was used, and nickel was employed as the coating metal. The thickness of the polymer coating layer can be controlled with the rotational speed of a stirrer in the emulsion. In the case of nickel coating, it is achieved by controlling the plating bath temperature and immersion time during the plating process. The experiment resulted in the development of a new technique for the fabrication of multilayer targets and low density, thick polymer-layer-coated targets

Ergonomics and sustainable development in the past two decades (1992-2011): Research trends and how ergonomics can contribute to sustainable development.

Science.gov (United States)

Radjiyev, Ayubkhon; Qiu, Hai; Xiong, Shuping; Nam, KyungHyun

2015-01-01

The need for sustainable development has been widely recognized and sustainable development has become a hot topic of various disciplines even though the role of ergonomics in it is seldom reported or considered. This study conducts a systematic survey of research publications in the fields of ergonomics and sustainable development over the past two decades (1992-2011), in order to identify their research trends and convergent areas where ergonomics can play an important role in sustainable development. The results show that 'methods and techniques', 'human characteristics', 'work design and organization', 'health and safety' and 'workplace and equipment design' are the top five frequently researched areas in ergonomics. Ergonomics has an opportunity to contribute its knowledge especially to 'industrial and product design', 'architecture', 'health and safety' and 'HCI' (especially for energy reduction issues) categories of sustainable development. Typical methodologies and general guidance on how to contribute the expertise of ergonomist to sustainable development are also discussed. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Several problems and their countermeasures of recent developments in nuclear techniques in China

International Nuclear Information System (INIS)

Xia Yuanfu

1993-01-01

The nuclear technique that is developing at top speed in China is introduced. Several characteristics of recent international developments in nuclear techniques are discussed and a precise classification is suggested. Particularly the present problems and their countermeasures of recent developments in nuclear techniques in China are explored

An analysis of development and research on spent nuclear fuel reprocessing

International Nuclear Information System (INIS)

Borges Silverio, Leticia; Queiroz Lamas, Wendell de

2011-01-01

Nuclear energy comes back to the discussions on the world stage as an energy source that does not contribute to global warming during production process. It can be chosen as the main source of power generation in some countries or complement the energy matrix in others. In this context, there is the need to develop new technologies for the management of radioactive waste generated by the production process. Final repositories for spent fuel are not yet in commercial operation, and techniques for fuel reprocessing have been developed, because after use, the fuel still has materials that produce energy. Some countries already use reprocessing, and develop research to make it more secure and more competitive, while others prefer to adopt policies to prevent developments in this area due to the problem of nuclear proliferation. In another line of research, new reactors are being developed in order to reduce the amount of waste in energy production and some will be designed to work in closed loop, recycling the materials generated.

An analysis of development and research on spent nuclear fuel reprocessing

Energy Technology Data Exchange (ETDEWEB)

Borges Silverio, Leticia; Lamas, Wendell de Queiroz [University of Taubate, Postgraduate Programme in Mechanical Engineering, Rua Daniel Danelli, s/n, Jd. Morumbi, Taubate, SP 12060-440 (Brazil)

2011-01-15

Nuclear energy comes back to the discussions on the world stage as an energy source that does not contribute to global warming during production process. It can be chosen as the main source of power generation in some countries or complement the energy matrix in others. In this context, there is the need to develop new technologies for the management of radioactive waste generated by the production process. Final repositories for spent fuel are not yet in commercial operation, and techniques for fuel reprocessing have been developed, because after use, the fuel still has materials that produce energy. Some countries already use reprocessing, and develop research to make it more secure and more competitive, while others prefer to adopt policies to prevent developments in this area due to the problem of nuclear proliferation. In another line of research, new reactors are being developed in order to reduce the amount of waste in energy production and some will be designed to work in closed loop, recycling the materials generated. (author)

Quality Management techniques embedded in Agile Project Development

Directory of Open Access Journals (Sweden)

Dovleac Raluca

2017-01-01

Full Text Available It used to be hard to make your dream come true and start a business but now, thanks to the dotcom boom and the rapid development of emerging technologies everybody has the chance to become the next Steve Jobs. Quality management tools and creativity techniques gave birth to the startup trend that transforms a brilliant idea into an innovative product. A common practice amongst startups is Agile development. In this paper, after analyzing the Agile approach and the tools used to ensure quality for every stage of a product’s development life cycle and the results of using the Agile approach looking out for advantages and short comings as well, we proposed a PDCA inspired tool which embeds both quality and creativity techniques to help developers ensure quality for each stage of a product’s life cycle as well as help them better organize their activities to reach the desired goals. We validated this approach by implementing it to the case of the Vitraly startup.

How our changing research arena can inspire innovative environmental research in developing countries (Alexander von Humboldt Medal Lecture)

Science.gov (United States)

Bouma, Johan

2017-04-01

Alexander von Humboldt was a true pioneer by engagingly articulating an ecosystem-wide vision on environmental issues and research, connecting and moving beyond disciplinary boundaries. Focusing here on soil science as an important discipline within the geosciences, the work of our group has acted in the spirit of this approach by focusing on interdisciplinary systems research in different developing countries in close interaction with stakeholders, based on soil processes in a dynamic landscape context. But recent developments of internet and social media are drastically changing relations between science and society all over the world. Scientists have to continuously struggle to keep their "societal license to research". Researchers in so-called developed countries would be well advised to communicate lessons learned to scientists in developing countries allowing them to leapfrog and avoid making time- consuming mistakes adhering to yesterday's practices. Specifically, attention should be paid to: (i) more continuing interaction with stakeholders when planning and executing research. This takes time that should be allocated in research projects. ; (ii) the quality of a limited number of key papers rather than on the total number of published and cited scientific papers, when judging researchers; (iii) defining new research on the basis of proven inadequacy of existing techniques and methods, realizing that "new" is not necessarily "better" and that available research methods and procedures can solve many current environmental problems; (iv) showing the value of the scientific approach that does not articulate: "yet another opinion" but is essential to face the major environmental challenges of the 21th century. (v) demonstrate the crucial importance of interdisciplinary ecosystem research and innovation when addressing the seventeen UN Sustainable Developments Goals (SDG's) that are attractive now as a focus for the scientific effort in land-related research. (vi

Progress report on research and development in 1991, Institute of Reactor Development, KfK

International Nuclear Information System (INIS)

1992-03-01

Progress report on research and development in 1991 Institute of Reactor Development. The papers on nuclear fusion concentrate on the design and material selection for highly stressed components as well as on safety matters. Experiments with the thermomechanical behaviour of different material samples continued, with selected materials being put to a load of up to 10 000 cycles. Carbon fiber reinforced composite materials proved to be very stable as regards their form, and unproblematic from a thermomechanical viewpoint, even at high cycle numbers. The papers on handling techniques refer to specific requirements of nuclear fusion with applications at JET and NET, to the development of system solutions to be used in the classical industrial area, and to standardization accompanying the developments. The system for physical simulation of working scenes was refined and extended by models for the prototype of a testing device to be handled in the torus of a fusion machine. Control of the articulated boom has been further improved. Under the nuclear safety research project, studies have been made of the dynamic behaviour of fast reactors under incident conditions, of the possible propagation of local cooling incidents in the reactor core as well as of core monitoring. The further development of physical models and computer programs on the dynamic behaviour of fast sodium-cooled reactors has been supported by experimental results. (orig./DG) [de

Karlsruhe Nuclear Research Center, Institute of Materials Research. Progress report on research and development work in 1993

International Nuclear Information System (INIS)

1994-03-01

The Institute consists of three parts IMF I, IMF II and IMF III. The tasks are divided into applied material physics (IMF I), material and structural mechanics (IMF II) and material process technology (IMF III). IMF I works preferably on the development of metallic, non-metallic and compound materials and on questions of the structure and properties of boundary surfaces and surface protection coatings. The main work of IMF II is the reliability of components, failure mechanics and the science of damage. IMF III examines process technology questions in the context of the manufacture of ceramic materials and fusion materials and the design of nuclear components. The Institute works on various main points of the Kernforschungszentrum in its research work, particularly in nuclear fusion, micro-system technique, nuclear safety research, superconductivity and in processes with little harmful substances and waste. Material and strength problems for future fusion reactors and fission reactors, in powerful micro systems and safety-related questions of nuclear technology are examined. Also, research not bound to projects in the field of metallic, ceramic and polymer materials for high stresses is carried out. (orig.) [de

Development of terminology for mammographic techniques for radiological technologists.

Science.gov (United States)

Yagahara, Ayako; Yokooka, Yuki; Tsuji, Shintaro; Nishimoto, Naoki; Uesugi, Masahito; Muto, Hiroshi; Ohba, Hisateru; Kurowarabi, Kunio; Ogasawara, Katsuhiko

2011-07-01

We are developing a mammographic ontology to share knowledge of the mammographic domain for radiologic technologists, with the aim of improving mammographic techniques. As a first step in constructing the ontology, we used mammography reference books to establish mammographic terminology for identifying currently available knowledge. This study proceeded in three steps: (1) determination of the domain and scope of the terminology, (2) lexical extraction, and (3) construction of hierarchical structures. We extracted terms mainly from three reference books and constructed the hierarchical structures manually. We compared features of the terms extracted from the three reference books. We constructed a terminology consisting of 440 subclasses grouped into 19 top-level classes: anatomic entity, image quality factor, findings, material, risk, breast, histological classification of breast tumors, role, foreign body, mammographic technique, physics, purpose of mammography examination, explanation of mammography examination, image development, abbreviation, quality control, equipment, interpretation, and evaluation of clinical imaging. The number of terms that occurred in the subclasses varied depending on which reference book was used. We developed a terminology of mammographic techniques for radiologic technologists consisting of 440 terms.

Research and development of a helium-4 based solar neutrino detector

International Nuclear Information System (INIS)

Lanou, R.E.; Maris, H.J.; Seidel, G.M.

1990-12-01

We report on work accomplished in the first 30 months of a research and development program to investigate the feasibility of a new technique to detect solar neutrinos in superfluid helium. Accomplishments include the successful completion of design, construction and operation of the entire cryogenic, mechanical and electronic apparatus. During the last several months we have begun a series of experiments in superfluid helium to test the method. Experimental results include the first observation of the combined physical processes essential to the detection technique: ballistic roton generation by energetic charged particles, quantum evaporation of helium at a free surface and bolometric detection of the evaporated helium by physisorption on a cold silicon wafer. Additional results are also presented

Development of techniques for monitoring corrosion in Magnox plant

International Nuclear Information System (INIS)

Haines, N.F.; Whittle, I.; Wilson, R.

1974-01-01

Steel oxidation in Magnox reactors has led to the development of techniques for measuring oxide thicknesses. An account is given of the methods used by the CEGB for making non-destructive measurements of oxide coatings both in the laboratory and remotely in the core regions of reactors. Specific techniques include β back-scattering which is compared with conventional microscope or weight gain methods for particular applications. The laser corrosion monitor and an ultrasonic method are described and compared as in-reactor techniques. An eddy current method is being developed for reactor regions where access is extremely restricted. A discussion considers the effect of oxide form upon the response of the instruments. The necessary further work is described which establishes the usefulness of each instrument over a range of oxide thicknesses and steels of different physical properties. (author)

Research and development of the prestressed concrete reactor vessel

International Nuclear Information System (INIS)

Shiozawa, Shoji; Omata, Ippei; Nakamura, Norio

1975-01-01

Compared with the steel reactor vessel, the prestressed concrete reactor vessel (PCRV) is said to be superior in safety and economy. One of the characteristics of the high temperature gas cooled reactor (HTGR) is the adoption of the PCRV instead of the steel reactor vessel to ensure safety. In order to improve safety characteristics, it is necessary for the PCRV to be provided with more reliable functions. When the multi-purpose HTGR or the gas cooled fast breeder reactor (GCFR) are realized in future, more severe conditions of technology will be imposed on the PCRV, and accordingly, technical developments are now increasingly required. IHI is now proceeding with the technical research and development on the PCRV, in which a basic study of its liner cooling system has already been completed. In this study applying a large cylindrical PCRV model, comparison was made between experimental data and analyses concerning the liner cooling system, and the results of analytical technique have been evaluated. The analytical technique established this time is applicable to the estimation of temperature distribution in the concrete of a large PCRV and also to the evaluation of the liner cooling system. (auth.)

Development on high precision monitoring technique of radon and thoron in environment

International Nuclear Information System (INIS)

Imaizumi, Masayuki; Hamada, Hiromasa; Goto, Masahiro; Nakazato, Hiroomi; Mori, Mitsuhiro

1999-01-01

In a field of the environmental management, many technical research and developments such as monitoring on drainage section and flowing speed change of groundwater, analysis on alternating flow phenomenon between surface water and groundwater, analysis on water leakage at a dam, forecasting of landslide, safety evaluation on ground due to detection of faults, have conducted. And, an application to analysis on gas flowing phenomenon from underground to atmosphere as a part of study on evaluation of effect of gas emitted from earth surface on the earth environment was investigated. This study aimed to elucidate behaviors of radon and thoron at environment and to develop a high precision monitoring technique on radon and thoron required to conduct an advanced application to a tracer in hydrology, applied geology, and environment engineering. (G.K.)

Proceedings of the Scientific Meeting on Research and Development of Isotopes Application and Radiation

International Nuclear Information System (INIS)

Singgih Sutrisno; Sofyan Yatim; Pattiradjawane, EIsje L.; Ismachin, Moch; Mugiono; Marga Utama; Komaruddin Idris

2004-02-01

The Proceedings of Scientific Meeting on Research and Development of Isotopes Application and Radiation has been presented on February 17-18, 2004 in Jakarta. The aims of the Meeting is to disseminate the results of research on application of nuclear techniques on agricultural, animal, industry, hydrology and environment. There were 4 invited papers and 38 papers from BATAN participants as well as outside. The articles are indexing separately. (PPIN)

Laboratory training manual on the use of nuclear techniques in pesticide research

International Nuclear Information System (INIS)

1983-01-01

This is a laboratory training manual on the use of nuclear techniques, and in particular radioisotopes in pesticide research. It is designed to give the scientists involved in pesticide research the basic terms and principles for understanding ionizing radiation: detection and measurement its hazards and safety measures, and some of the more common applications. Laboratory exercises representing the types of experiments that are valuable in pesticide research programmes and field tests which demonstrate the use of radiolabelled pesticides are included

Analysing data from observer studies in medical imaging research: An introductory guide to free-response techniques

International Nuclear Information System (INIS)

Thompson, J.D.; Manning, D.J.; Hogg, P.

2014-01-01

Observer performance methods maintain their place in radiology research, particularly in the assessment of the diagnostic accuracy of new and existing techniques, despite not being fully embraced by the wider audience in medical imaging. The receiver operating characteristic (ROC) paradigm has been widely used in research and the latest location sensitive methods allow an analysis that is closer to the clinical scenario. This paper discusses the underpinning theories behind observer performance assessment, exploring the potential sources of error and the development of the ROC method. The paper progresses by explaining the clinical relevance and statistical suitability of the free-response ROC (FROC) paradigm, and the methodological considerations for those wishing to perform an observer performance study

Fetal Cardiac Doppler Signal Processing Techniques: Challenges and Future Research Directions

Directory of Open Access Journals (Sweden)

Saeed Abdulrahman Alnuaimi

2017-12-01

Full Text Available The fetal Doppler Ultrasound (DUS is commonly used for monitoring fetal heart rate and can also be used for identifying the event timings of fetal cardiac valve motions. In early-stage fetuses, the detected Doppler signal suffers from noise and signal loss due to the fetal movements and changing fetal location during the measurement procedure. The fetal cardiac intervals, which can be estimated by measuring the fetal cardiac event timings, are the most important markers of fetal development and well-being. To advance DUS-based fetal monitoring methods, several powerful and well-advanced signal processing and machine learning methods have recently been developed. This review provides an overview of the existing techniques used in fetal cardiac activity monitoring and a comprehensive survey on fetal cardiac Doppler signal processing frameworks. The review is structured with a focus on their shortcomings and advantages, which helps in understanding fetal Doppler cardiogram signal processing methods and the related Doppler signal analysis procedures by providing valuable clinical information. Finally, a set of recommendations are suggested for future research directions and the use of fetal cardiac Doppler signal analysis, processing, and modeling to address the underlying challenges.

Using the critical incident technique in community-based participatory research: a case study.

Science.gov (United States)

Belkora, Jeffrey; Stupar, Lauren; O'Donnell, Sara

2011-01-01

Successful community-based participatory research involves the community partner in every step of the research process. The primary study for this paper took place in rural, Northern California. Collaborative partners included an academic researcher and two community based resource centers that provide supportive services to people diagnosed with cancer. This paper describes our use of the Critical Incident Technique (CIT) to conduct Community-based Participatory Research. We ask: Did the CIT facilitate or impede the active engagement of the community in all steps of the study process? We identified factors about the Critical Incident Technique that were either barriers or facilitators to involving the community partner in every step of the research process. Facilitators included the CIT's ability to accommodate involvement from a large spectrum of the community, its flexible design, and its personal approach. Barriers to community engagement included training required to conduct interviews, depth of interview probes, and time required. Overall, our academic-community partners felt that our use of the CIT facilitated community involvement in our Community-Based Participatory Research Project, where we used it to formally document the forces promoting and inhibiting successful achievement of community aims.

Prognostic aspects on the development of imaging techniques

International Nuclear Information System (INIS)

Biehl, H.

1985-01-01

The development of imaging techniques designed for medical diagnostics and their application within the health service system are forecast up to the year 2000. The changes in the structure of the imaging methods that are to be expected in the GDR are outlined. Considering the users' needs and demands to be met by the manufacturers, in the long-term forecast it is dealt with more specifically with X-ray techniques, computer tomography, ultrasonic diagnostics, video endoscopy and the use of expert systems. (author)

Attempts to develop a new nuclear measurement technique of β-glucuronidase levels in biological samples

International Nuclear Information System (INIS)

Unak, T.; Avcibasi, U.; Yildirim, Y.; Cetinkaya, B.

2003-01-01

β-Glucuronidase is one of the most important hydrolytic enzymes in living systems and plays an essential role in the detoxification pathway of toxic materials incorporated into the metabolism. Some organs, especially liver and some tumour tissues, have high level of β-glucuronidase activity. As a result the enzymatic activity of some kind of tumour cells, the radiolabelled glucuronide conjugates of cytotoxic, as well as radiotoxic compounds have potentially very valuable diagnostic and therapeutic applications in cancer research. For this reason, a sensitive measurement of β-glucuronidase levels in normal and tumour tissues is a very important step for these kinds of applications. According to the classical measurement method of β-glucuronidase activity, in general, the quantity of phenolphthalein liberated from its glucuronide conjugate, i.e. phenolphthalein-glucuronide, by β-glucuronidase has been measured by use of the spectrophotometric technique. The lower detection limit of phenolphthalein by the spectrophotometric technique is about 1-3 mg. This means that the β-glucuronidase levels could not be detected in biological samples having lower levels of β-glucuronidase activity and therefore the applications of the spectrophotometric technique in cancer research are very seriously limited. Starting from this consideration, we recently attempted to develop a new nuclear technique to measure much lower concentrations of β-glucuronidase in biological samples. To improve the detection limit, phenolphthalein-glucuronide and also phenyl-N-glucuronide were radioiodinated with 131 I and their radioactivity was measured by use of the counting technique. Therefore, the quantity of phenolphthalein or aniline radioiodinated with 131 I and liberated by the deglucuronidation reactivity of β-glucuronidase was used in an attempt to measure levels lower than the spectrophotometric measurement technique. The results obtained clearly verified that 0.01 pg level of

Consulting the oracle: ten lessons from using the Delphi technique in nursing research.

Science.gov (United States)

Keeney, Sinead; Hasson, Felicity; McKenna, Hugh

2006-01-01

The aim of this paper was to provide insight into the Delphi technique by outlining our personal experiences during its use over a 10-year period in a variety of applications. As a means of achieving consensus on an issue, the Delphi research method has become widely used in healthcare research generally and nursing research in particular. The literature on this technique is expanding, mainly addressing what it is and how it should be used. However, there is still much confusion and uncertainty surrounding it, particularly about issues such as modifications, consensus, anonymity, definition of experts, how 'experts' are selected and how non-respondents are pursued. This issues that arise when planning and carrying out a Delphi study include the definition of consensus; the issue of anonymity vs. quasi-anonymity for participants; how to estimate the time needed to collect the data, analyse each 'round', feed back results to participants, and gain their responses to this feedback; how to define and select the 'experts' who will be asked to participate; how to enhance response rates; and how many 'rounds' to conduct. Many challenges and questions are raised when using the Delphi technique, but there is no doubt that it is an important method for achieving consensus on issues where none previously existed. Researchers need to adapt the method to suit their particular study.

Review of nuclear techniques in South African agricultural research: 1963-1984

International Nuclear Information System (INIS)

Marais, P.G.; Kotze, W.A.G.; Joubert, M.E.; Huismans, H.; Brodrick, H.T.

1985-01-01

The use of nuclear techniques in agriculture research in the RSA was reviewed at a National Conference on Nuclear Energy in 1963. Since then, 573 publications on the use of nuclear techniques in agriculture have appeared, which can be classified as follows: zoology; botany; food irradiation; soil and plant relations; soil moisture and ground water studies; and other radiation and tracer applications. A survey of literature on the use of radioactive isotopes in agriculture published between 1973 and 1980, including South African publications, was compiled by the Atomic Energy Board in 1980 but did not include any review of the scientific material

Isotope techniques in water resources development 1991

International Nuclear Information System (INIS)

1992-01-01

Water resources are scarce in many parts of the world. Often, the only water resource is groundwater. Overuse usually invites a rapid decline in groundwater resources which are recharged insufficiently, or not at all, by prevailing climatic conditions. These and other problems currently encountered in hydrology and associated environmental fields have prompted an increasing demand for the utilization of isotope methods. Such methods have been recognized as being indispensable for solving problems such as the identification of pollution sources, characterization of palaeowater resources, evaluation of recharge and evaporative discharge under arid and semi-arid conditions, reconstruction of past climates, study of the interrelationships between surface and groundwater, dating of groundwater and validation of contaminant transport models. Moreover, in combination with other hydrogeological and geochemical methods, isotope techniques can provide useful hydrological information, such as data on the origin, replenishment and dynamics of groundwater. It was against this background that the International Atomic Energy Agency, in co-operation with the United Nations Educational, Scientific and Cultural Organization and the International Association of Hydrological Sciences, organized this symposium on the Use of Isotope Techniques in Water Resources Development, which took place in Vienna from 11 to 15 March 1991. The main themes of the symposium were the use of isotope techniques in solving practical problems of water resources assessment and development, particularly with respect to groundwater protection, and in studying environmental problems related to water, including palaeohydrological and palaeoclimatological problems. A substantial part of the oral presentations was concerned with the present state and trends in groundwater dating, and with some methodological aspects. These proceedings contain the papers of 37 oral and the extended synopses of 47 poster

Development and verification of unstructured adaptive mesh technique with edge compatibility

International Nuclear Information System (INIS)

Ito, Kei; Ohshima, Hiroyuki; Kunugi, Tomoaki

2010-01-01

In the design study of the large-sized sodium-cooled fast reactor (JSFR), one key issue is suppression of gas entrainment (GE) phenomena at a gas-liquid interface. Therefore, the authors have been developed a high-precision CFD algorithm to evaluate the GE phenomena accurately. The CFD algorithm has been developed on unstructured meshes to establish an accurate modeling of JSFR system. For two-phase interfacial flow simulations, a high-precision volume-of-fluid algorithm is employed. It was confirmed that the developed CFD algorithm could reproduce the GE phenomena in a simple GE experiment. Recently, the authors have been developed an important technique for the simulation of the GE phenomena in JSFR. That is an unstructured adaptive mesh technique which can apply fine cells dynamically to the region where the GE occurs in JSFR. In this paper, as a part of the development, a two-dimensional unstructured adaptive mesh technique is discussed. In the two-dimensional adaptive mesh technique, each cell is refined isotropically to reduce distortions of the mesh. In addition, connection cells are formed to eliminate the edge incompatibility between refined and non-refined cells. The two-dimensional unstructured adaptive mesh technique is verified by solving well-known lid-driven cavity flow problem. As a result, the two-dimensional unstructured adaptive mesh technique succeeds in providing a high-precision solution, even though poor-quality distorted initial mesh is employed. In addition, the simulation error on the two-dimensional unstructured adaptive mesh is much less than the error on the structured mesh with a larger number of cells. (author)

Research and development on procedures to stabilize acaricides in livestock dips. Proceedings of a final research co-ordination meeting

International Nuclear Information System (INIS)

1997-11-01

Ticks and mites are serious ectoparasites of livestock in many countries. As vectors of animal diseases they pose a threat to livestock production. Traditionally, different types of acaricides are used to control them. One of the most commonly used tick control techniques is to force animals to walk through an acaricide suspension in a trough or Cattle Dip. Dipping is quite effective as the entire body of the animal gets treated with the acaricide. However, with increased usage the concentration of the acaricide in the 'dip' declines due to removal by the animal and degradation by biological and chemicals processes. The dissipation of the acaricide results in loss of efficacy of the 'dip', and may also enhance the development of resistance by the ectoparasites to the acaricides. Maintenance of an effective concentration, by periodic recharge or stabilization of the acaricide, is essential to assure efficient and cost-effective control and to minimize chances of resistance to develop. In 1990, the FAO/IAEA Joint Division, recognizing the need for co-ordinated research on studying the dissipation of acaricides in cattle dips and developing procedures to stabilize them, established a 5-year Co-ordinated Research Programme on Development of Procedures to Stabilize Acaricides in Livestock Dips and of Simplified Methods to Measure Their Concentration, Using Nuclear Techniques. In initiating this programme, the Joint Division recognized that major gaps exist in the knowledge in this area which, if filled, would greatly aid developing countries in their effort to more effectively use acaricides to protect animal health. This TECDOC reports the accomplishments of this programme

Contribution to the research of the optimal techniques in 60Co radiography of steel

International Nuclear Information System (INIS)

Cheret, J.; Nouvet, A.

1976-01-01

Radiographic testing supposes on one hand the knowledge of the best available techniques, on the other hand the selection of one of them through a compromise between the exposure time and the image quality. An example of research and comparative evaluations of the techniques are given [fr

Research and development of FBR fuel reprocessing in PNC

International Nuclear Information System (INIS)

Hoshino, T.

1976-05-01

The research program of the PNC for FBR fuel reprocessing in Japan is discussed. The general characteristics of FBR fuel reprocessing are pointed out and a comparison with LWR fuel is made. The R and D program is based on reprocessing using the aqueous Purex process. So far, some preliminary steps of the research program have been carried out, these include solvent extraction test, off-gas treatment test, voloxidation process study, solidification test of high-level liquid waste, and study of the dissolution behaviour of irradiated mixed oxide fuel. By the end of the 1980s, a pilot plant for FBR fuel reprocessing will be completed. For the design of the pilot plant, further research will be carried out in the following fields: head-end techniques; voloxidation process; dissolution and extraction techniques; waste treatment techniques. A time schedule for the different steps of the program is included

Present state on research and development of underground disposal

Energy Technology Data Exchange (ETDEWEB)

NONE