WorldWideScience

Sample records for research simulation working

  1. The research of hourglass worm dynamic balancing simulation based on SolidWorks motion

    Science.gov (United States)

    Wang, Zhuangzhuang; Yang, Jie; Liu, Pingyi; Zhao, Junpeng

    2018-02-01

    Hourglass worm is extensively used in industry due to its characteristic of heavy-load and a large reduction ratio. Varying sizes of unbalanced mass distribution appeared in the design of a single head worm. With machines developing towards higher speed and precision, the vibration and shock caused by the unbalanced mass distribution of rotating parts must be considered. Therefore, the balance grade of these parts must meet higher requirements. A method based on theoretical analysis and SolidWorks motion software simulation is presented in this paper; the virtual dynamic balance simulation test of the hourglass worm was carried out during the design of the product, so as to ensure that the hourglass worm meet the requirements of dynamic balance in the design process. This can effectively support the structural design of the hourglass worm and provide a way of thinking and designing the same type of products.

  2. Computational fluid dynamics simulation of a single cylinder research engine working with biodiesel

    Directory of Open Access Journals (Sweden)

    Moldovanu Dan

    2013-01-01

    Full Text Available The main objective of the paper is to present the results of the CFD simulation of a DI single cylinder engine using diesel, biodiesel, or different mixture proportions of diesel and biodiesel and compare the results to a test bed measurement in the same functioning point. The engine used for verifying the results of the simulation is a single cylinder research engine from AVL with an open ECU, so that the injection timings and quantities can be controlled and analyzed. In Romania, until the year 2020 all the fuel stations are obliged to have mixtures of at least 10% biodiesel in diesel [14]. The main advantages using mixtures of biofuels in diesel are: the fact that biodiesel is not harmful to the environment; in order to use biodiesel in your engine no modifications are required; the price of biodiesel is smaller than diesel and also if we compare biodiesel production to the classic petroleum based diesel production, it is more energy efficient; biodiesel assures more lubrication to the engine so the life of the engine is increased; biodiesel is a sustainable fuel; using biodiesel helps maintain the environment and it keeps the people more healthy [1-3].

  3. ???????????? SolidWorks/SolidWorks Flow Simulation/SolidWorks Simulation ??? ?????????? ???????? ?? ????????????? ???

    OpenAIRE

    ????????????, ?. ?.; ????????, ?. ?.; ?????, ?. ?.

    2012-01-01

    ? ?????? ???????? ??????? ??????? ???????? ?? ???????????? ??????????? ????????? SolidWorks/SolidWorks Flow Simulation (COSMOSFloWorks)/SolidWorks Simulation ??? ?????????? ???????? ?? ????????????? ???. ??? ???????? ????????? ???????? ?????????? ?? ?????? ???????? ??????? ? ????????????? ?????? ? ????????????? ????????????? ?????????? ???????????? SolidWorks Flow Simulation (COSMOSFloWorks). ??? ???????????? ??????????? ????????????? ?????? ?? ????????? ??????????? ??????? ?? ??????????? ...

  4. Plasma theory and simulation research

    International Nuclear Information System (INIS)

    Birdsall, C.K.

    1989-01-01

    Our research group uses both theory and simulation as tools in order to increase the understanding of instabilities, heating, diffusion, transport and other phenomena in plasmas. We also work on the improvement of simulation, both theoretically and practically. Our focus has been more and more on the plasma edge (the ''sheath''), interactions with boundaries, leading to simulations of whole devices (someday a numerical tokamak)

  5. Social Work Research

    DEFF Research Database (Denmark)

    Social work research has gathered a greater transparency and clarity of identity in North American and parts of Europe. Furthermore, the rapid emergence of social work research in other European countries, China, India, Japan and elsewhere in Asia and Pacific Rim countries, and gradually in South...... America, has created a need for a collection that can contribute to both shaping and making accessible key and sometimes hard-to-access sources. This four-volume collection answers this need, bringing together key literature in a single resource and structuring it into thematic volumes to enable clear...... understanding of the different aspects involved in the research. Volume One: Historical Trajectories, Purposes and Key Concepts Volume Two: Key Decisions about Research Strategy Volume Three: The Practice of Social Work Research Volume Four: The Contexts of Social Work Research...

  6. Simulation Techniques That Work.

    Science.gov (United States)

    Beland, Robert M.

    1983-01-01

    At the University of Florida, simulated experiences with disabled clients help bridge the gap between coursework and internships for recreation therapy students. Actors from the university's drama department act out the roles of handicapped persons, who are interviewed by therapy students. (PP)

  7. Participatory simulation in hospital work system design

    DEFF Research Database (Denmark)

    Andersen, Simone Nyholm

    When ergonomic considerations are integrated into the design of work systems, both overall system performance and employee well-being improve. A central part of integrating ergonomics in work system design is to benefit from emplo y-ees’ knowledge of existing work systems. Participatory simulation...... (PS) is a method to access employee knowledge; namely employees are involved in the simulation and design of their own future work systems through the exploration of models representing work system designs. However, only a few studies have investigated PS and the elements of the method. Yet...... understanding the elements is essential when analyzing and planning PS in research and practice. This PhD study investigates PS and the method elements in the context of the Danish hospital sector, where PS is applied in the renewal and design of public hospitals and the work systems within the hospitals...

  8. Group Work. Research Brief

    Science.gov (United States)

    Walker, Karen

    2010-01-01

    According to Johnson and Johnson, group work helps increase student retention and satisfaction, develops strong oral communication and social skills, as well as higher self-esteem (University of Minnesota, n.d.). Group work, when planned and implemented deliberately and thoughtfully helps students develop cognitive and leadership skills as well as…

  9. Putting research to work

    International Development Research Centre (IDRC) Digital Library (Canada)

    2013-03-31

    Mar 31, 2013 ... inexpensive vaccine to protect livestock from five major diseases ..... Researchers expect to have the coatings ready for testing in. 2014. ... research team presented recommendations on fertilizer use ..... success in preventing and controlling malaria. ... of leadership in the global fight against malnutrition and.

  10. Action research and Care Work

    DEFF Research Database (Denmark)

    Andersen, John; Bilfeldt, Anette

    The paper is a about planning and empowerment in care work at public nursing homes and the role of action research. It is based on ongoing work in the “Center for Demokratisk Samfundsudvikling og Aktionsforskning” at Roskilde University and the transnational research network KATARSIS, which works...

  11. Reconsideration of the simulated work task situation

    DEFF Research Database (Denmark)

    Borlund, Pia; Schneider, Jesper Wiborg

    2010-01-01

    The present paper reports on the initial study and the preliminary findings of how the concept of simulated work task situation is reported used in the research literature. The overall objective of the study is in a systematic manner to learn how and for what types of evaluations the concept is a...... to involve the study participants’ own information needs (to function as baseline of search interaction) is generally neglected in the reported studies....

  12. Research and simulation

    International Nuclear Information System (INIS)

    Serres, M.; Klein, E.; Besnard, D.

    2002-01-01

    The scientific activity of old used to practice following two modes: the theory and the experiment. The last ten years saw the emergence of a third approach: the simulation. In this evolution the CEA played a major part, in particular to answer the need of the nuclear park and the nuclear disarmament. In this framework, the document presents the simulation activities of the CEA in many domains: the climate, the radioactive wastes management, the particles Physics, the biological macromolecules, the interfaces and surfaces, the nuclear reactors, the welding, the non destructive testing, the fusion. (A.L.B.)

  13. Virtual environments simulation in research reactor

    Science.gov (United States)

    Muhamad, Shalina Bt. Sheik; Bahrin, Muhammad Hannan Bin

    2017-01-01

    Virtual reality based simulations are interactive and engaging. It has the useful potential in improving safety training. Virtual reality technology can be used to train workers who are unfamiliar with the physical layout of an area. In this study, a simulation program based on the virtual environment at research reactor was developed. The platform used for virtual simulation is 3DVia software for which it's rendering capabilities, physics for movement and collision and interactive navigation features have been taken advantage of. A real research reactor was virtually modelled and simulated with the model of avatars adopted to simulate walking. Collision detection algorithms were developed for various parts of the 3D building and avatars to restrain the avatars to certain regions of the virtual environment. A user can control the avatar to move around inside the virtual environment. Thus, this work can assist in the training of personnel, as in evaluating the radiological safety of the research reactor facility.

  14. Simulation of Oscillatory Working Tool

    Directory of Open Access Journals (Sweden)

    Carmen Debeleac

    2010-01-01

    Full Text Available The paper presents a study of the resistance forces in soils cutting, with emphasis on their dependence on working tool motion during the loading process and dynamic regimes. The periodic process of cutting of soil by a tool (blade has described. Different intervals in the cycle of steady-state motion of the tool, and several interaction regimes were considered. The analysis has based on a non-linear approximation of the dependence of the soil resistance force on tool motion. Finally, the influence of frequency on the laws governing the interaction in the cyclic process was established.

  15. A Multiagent Modeling Environment for Simulating Work Practice in Organizations

    Science.gov (United States)

    Sierhuis, Maarten; Clancey, William J.; vanHoof, Ron

    2004-01-01

    In this paper we position Brahms as a tool for simulating organizational processes. Brahms is a modeling and simulation environment for analyzing human work practice, and for using such models to develop intelligent software agents to support the work practice in organizations. Brahms is the result of more than ten years of research at the Institute for Research on Learning (IRL), NYNEX Science & Technology (the former R&D institute of the Baby Bell telephone company in New York, now Verizon), and for the last six years at NASA Ames Research Center, in the Work Systems Design and Evaluation group, part of the Computational Sciences Division (Code IC). Brahms has been used on more than ten modeling and simulation research projects, and recently has been used as a distributed multiagent development environment for developing work practice support tools for human in-situ science exploration on planetary surfaces, in particular a human mission to Mars. Brahms was originally conceived of as a business process modeling and simulation tool that incorporates the social systems of work, by illuminating how formal process flow descriptions relate to people s actual located activities in the workplace. Our research started in the early nineties as a reaction to experiences with work process modeling and simulation . Although an effective tool for convincing management of the potential cost-savings of the newly designed work processes, the modeling and simulation environment was only able to describe work as a normative workflow. However, the social systems, uncovered in work practices studied by the design team played a significant role in how work actually got done-actual lived work. Multi- tasking, informal assistance and circumstantial work interactions could not easily be represented in a tool with a strict workflow modeling paradigm. In response, we began to develop a tool that would have the benefits of work process modeling and simulation, but be distinctively able to

  16. Boundary works of Grindr research

    DEFF Research Database (Denmark)

    Jørgensen, Kristian Møller

    Boundary works of Grindr research: Sociological and queer perspectives on shame and intimacy As a newly minted PhD student I am eager to explain to my colleagues what hook-up apps are and why we should care to look at them. One day at the University campus talking to a colleague I find myself out...... The issues at play in the above vignette (Humphreys 2005) represent at least two familiar issues: The media scholar working ethnographically finding that there seems to be “two there’s there” (Schegloff 2002); and the queer, insider researcher coming into academia and moving back into the queer cultural...... ethnographers face both a quantitative increase and a qualitatively changed situation. In the vignette, the fact that the Grindr app, by way of its locative abilities, displays users nearby ties directly into the felt discomfort: The fact that the community that is “exposed” comprises of students and faculty...

  17. Titles and works - Accreditation to Supervise Research

    International Nuclear Information System (INIS)

    Baldacchino, Gerard

    2004-01-01

    After a presentation of his academic curriculum and activities, the author proposes an overview of his research works. He identifies and discusses his scientific objectives and motivations which notably addressed the radiolysis of heavy ions, and more particularly the effect of high linear energy transfers (LET). He proposes an overview of his research thesis which addressed the geometry relaxation of molecules after their light excitation in an excited electronic status, and of his works on water radiolysis at high LET (effect of LET on radiolysis efficiencies, pulsed radiolysis with particles possession a high LET, Monte Carlo simulation of radiolysis with heavy ions), on application of radiolysis to molecules of biological interest, and on the influence of solvent confinement and on problems of local dosimetry. Then, the author presents his current research projects: radiolysis of supercritical water, effects of LET in radiolysis

  18. Safety at Work : Research Methodology

    NARCIS (Netherlands)

    Beurden, van K. (Karin); Boer, de J. (Johannes); Brinks, G. (Ger); Goering-Zaburnenko, T. (Tatiana); Houten, van Y. (Ynze); Teeuw, W. (Wouter)

    2012-01-01

    In this document, we provide the methodological background for the Safety atWork project. This document combines several project deliverables as defined inthe overall project plan: validation techniques and methods (D5.1.1), performanceindicators for safety at work (D5.1.2), personal protection

  19. Modeling and Simulation for Mission Operations Work System Design

    Science.gov (United States)

    Sierhuis, Maarten; Clancey, William J.; Seah, Chin; Trimble, Jay P.; Sims, Michael H.

    2003-01-01

    Work System analysis and design is complex and non-deterministic. In this paper we describe Brahms, a multiagent modeling and simulation environment for designing complex interactions in human-machine systems. Brahms was originally conceived as a business process design tool that simulates work practices, including social systems of work. We describe our modeling and simulation method for mission operations work systems design, based on a research case study in which we used Brahms to design mission operations for a proposed discovery mission to the Moon. We then describe the results of an actual method application project-the Brahms Mars Exploration Rover. Space mission operations are similar to operations of traditional organizations; we show that the application of Brahms for space mission operations design is relevant and transferable to other types of business processes in organizations.

  20. Nordic Working Life Research - Continuity and Renewal

    DEFF Research Database (Denmark)

    Hvid, Helge Søndergaard; Bergholm, Tapio; Gonäs, Lena

    2011-01-01

    Working life research does not have clear boundaries; however its focus is quite clear: Changes in working life and how these changes affect qualifications, health, occupations, innovation, the economy, identity, social orientation and culture. The density of working life research is quite high...... in the Nordic countries, and this research has always been involved in the development of the Nordic welfare societies in which the development of work has been one important factor. In this article working life research is presented in its historical contexts, emphasizing the welfare challenges to which...... the research has been related. The challenges and tensions related to the research are not presented as being simply internal to the research work, they also reflect challenges and tensions in working life and institutions that are supposed to support working life. Current controversies in working life...

  1. Intelligent Flight Control Simulation Research Program

    National Research Council Canada - National Science Library

    Stolarik, Brian

    2007-01-01

    ...). Under the program, entitled "Intelligent Flight Control Simulation Research Laboratory," a variety of technologies were investigated or developed during the course of the research for AFRL/VAC...

  2. Multiagent Work Practice Simulation: Progress and Challenges

    Science.gov (United States)

    Clancey, William J.; Sierhuis, Maarten

    2002-01-01

    Modeling and simulating complex human-system interactions requires going beyond formal procedures and information flows to analyze how people interact with each other. Such work practices include conversations, modes of communication, informal assistance, impromptu meetings, workarounds, and so on. To make these social processes visible, we have developed a multiagent simulation tool, called Brahms, for modeling the activities of people belonging to multiple groups, situated in a physical environment (geographic regions, buildings, transport vehicles, etc.) consisting of tools, documents, and computer systems. We are finding many useful applications of Brahms for system requirements analysis, instruction, implementing software agents, and as a workbench for relating cognitive and social theories of human behavior. Many challenges remain for representing work practices, including modeling: memory over multiple days, scheduled activities combining physical objects, groups, and locations on a timeline (such as a Space Shuttle mission), habitat vehicles with trajectories (such as the Shuttle), agent movement in 3d space (e.g., inside the International Space Station), agent posture and line of sight, coupled movements (such as carrying objects), and learning (mimicry, forming habits, detecting repetition, etc.).

  3. Tracer work in pesticide research

    International Nuclear Information System (INIS)

    Gonzales, B.P.

    1989-01-01

    Innumerable studies on the large number of pesticides being used throughout the world led to some adverse findings on the properties and behavior of these chemicals and their degradation products in revelation to potential toxicity and environmental pollution. However, it is also a fact (difficult to accept as it may) that the use of pesticides as an indirect means of increasing food production cannot yet be dispensed with despite the potential dangers attributed to it. What can be done is to insure its judicious application which means minimizing its effectiveness in controlling pest infestations. To be able to do this it is necessary to know not only what pesticide is to be used against a given pest but also the fate of pesticide after application to a particular environment under prevailing conditions. Knowledge of the distribution and persistence of the parent compounds under metabolites will also help either, to confirm or to dispel the alleged dangers posed by them. Radiotracer methodology is particularly effective for this type of work because it permits highly sensitive analysis with minimum clean-up and permits one to determine even the bound residues which defies ordinary extraction procedures. Some studies made are studies on fate of pesticides in plant after foliar application to plant needs, uptake and translocation of systemic pesticides, fate of pesticides in soil, bioaccumulation of pesticide by aquatic organisms, etc. This particular study is on distribution of pesticide among the components of a rice/fish ecosystem. This project aims to generate data from experiments conducted in a model ecosystem using radiolabelled lindane and carbo-furan. In both cases, results show a decline in extractable species from the recommended dosage of pesticide application although they tend to imbibe a considerable amount of pesticide. It is hoped that depuration in additional experiments will bring useful results. (Auth.)

  4. Research nuclear reactor start-up simulator

    International Nuclear Information System (INIS)

    Sofo Haro, M.; Cantero, P.

    2009-01-01

    This work presents the design and FPGA implementation of a research nuclear reactor start-up simulator. Its aim is to generate a set of signals that allow replacing the neutron detector for stimulated signals, to feed the measurement electronic of the start-up channels, to check its operation, together with the start-up security logic. The simulator presented can be configured on three independent channels and adjust the shape of the output pulses. Furthermore, each channel can be configured in 'rate' mode, where you can specify the growth rate of the pulse frequency in %/s. Result and details of the implementation on FPGA of the different functional blocks are given. (author)

  5. Design of biped hip simulator using SolidWorks

    Science.gov (United States)

    Zainudin, M. R.; Yahya, A.; Fazli, M. I. M.; Syahrom, A.; Harun, F. K. C.; Nazarudin, M. S.

    2017-10-01

    The increasing number of people who underwent both hip implant surgery based on World Health Organization (WHO) has received massive attention from researchers lately to develop various types of hip simulators in order to test the hip implant. Various number of hip simulator have been developed with different functions and capabilities. This paper presents the design development of biped hip simulator using SolidWorks software by taking into consideration some improvement and modifications. The finite element method is used to test the design whether it is safe to be used or not. The biped hip simulator has been successfully designed and ready to be fabricated as the endurance testing shown a positive results. The von Mises stress induced in the material is an alloy steel which is 2,975,862.3 N/m2 lower than the yield strength. Thus, the design is safe to be used as it obey the safety criterion.

  6. Electronic Concepts Simulation Research Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The laboratory utilizes state-of-the-art digital models and simulations of both friendly and enemy airborne and ground-based weapon and command and control systems....

  7. Training program attracts work and health researchers

    DEFF Research Database (Denmark)

    Skakon, Janne

    2007-01-01

    Each year in Canada, the costs of disability arising from work-related causes – including workers’ compensation and health-care costs – exceed $6.7 billion. Despite the significant financial and social impacts of worker injury and illness, only a small fraction of Canadian researchers are dedicated...... to examining work disability prevention issues. An innovative program that attracts international students, the Work Disability Prevention Canadian Institutes of Health Research (CIHR) Strategic Training Program, aims to build research capacity in young researchers and to create a strong network that examines...

  8. Theorizing practice research in social work

    DEFF Research Database (Denmark)

    Uggerhøj, Lars

    2011-01-01

    . To elaborate and define practice research in social work, it is necessary to consider connected approaches and theories. The article will show that practice research is both connected to and can use the theoretical frames of Actual science and Mode 2 knowledge production. To understand and develop research......The article focuses on theories, definitions, interests, possibilities and barriers in practice research in social work. It points out that both practice and research will be influenced by participating in and developing practice research. – and that both parts must and will learn from the process...... closely connected to practice it is necessary to define it in three different ways: practice research, practitioner research and user-controlled research. Examples from different Nordic approaches connected to these definitions will be presented. Although practice and research both need to develop...

  9. "Working the Ruins" of Collaborative Feminist Research

    Science.gov (United States)

    Schultz, Callie Spencer

    2017-01-01

    In this paper, I enact an "inquiry among the ruins" of a collaborative feminist duoethnography. Through the process of exploring instances of failure, I aim to (re)think "collaborative" research, feminist goals for collaborative research, and a space for such research in the academy. As I work the ruins of a duoethnography, I…

  10. Participatory ergonomics simulation of hospital work systems: The influence of simulation media on simulation outcome

    DEFF Research Database (Denmark)

    Andersen, Simone Nyholm; Broberg, Ole

    2015-01-01

    of tool operation support ergonomics identification and evaluation related to the work system entities space and technologies & tools. The table-top models’ high fidelity of function relations and affordance of a helicopter view support ergonomics identification and evaluation related to the entity......Current application of work system simulation in participatory ergonomics (PE) design includes a variety of different simulation media. However, the actual influence of the media attributes on the simulation outcome has received less attention. This study investigates two simulation media: full......-scale mock-ups and table-top models. The aim is to compare, how the media attributes of fidelity and affordance influence the ergonomics identification and evaluation in PE design of hospital work systems. The results illustrate, how the full-scale mock-ups’ high fidelity of room layout and affordance...

  11. Perspectives on Nordic Working Life Research

    Directory of Open Access Journals (Sweden)

    Jan Ch. Karlsson

    2013-09-01

    Full Text Available Welcome to this Thematic Issue on Perspectives on Nordic Working Life Research! It is perhaps not that surprising that a journal called Nordic Journal of Working Life Studies contains many discussions about “Nordic Models”: What is the Nordic Welfare State Model? What has happened to it lately? Is there still one? Has there ever been one? What about the Nordic Industrial Relations Model—is it on its way to be abandoned? And the Nordic Labor Market Model? Or the Nordic Work Environment Model? In contrast, in the Thematic Issue part of this issue of NJWLS Nordic working life research itself is discussed. Editing the issue has led me to some (selfcritical reflections on Nordic working life research—or perhaps rather reflections on the self-image of Nordic working life researchers. We often say that two of the cornerstones of Nordic working life research are the assumption that there is a positive correlation between employee autonomy at work and higher productivity, and that our research tradition is different from those found in other geographical areas (and, implicitly, probably better. Being part of the Nordic tradition, I too have claimed both, but I now think both needs to be qualified and critically discussed. Or rather, the first needs to be qualified and the consequences of the other critically evaluated (...

  12. [Use of driving simulators in psychological research].

    Science.gov (United States)

    Andysz, Aleksandra; Waszkowska, Małgorzata; Merecz, Dorota; Drabek, Marcin

    2010-01-01

    The history of simulators dates back to the first decades of the twentieth century. At the beginning they were used to train pilots, and eventually they were used in the automotive industry for testing the strength of new vehicles and ergonomic solutions. With time research institutions and technical universities from outside the automotive industry have become more and more interested in simulators. Attractiveness of simulators for researchers is based on a number of important factors: they create the possibility of modeling, control and repeatability of different experimental situations, reducing at the same time the impact of confounding factors. Simulators have a great potential for data collection and processing. What's more, they are safe and ecologic. These values make them almost an ideal research tool. The article presents a review of psychological studies with use of vehicle driving simulators. It also points to advantages and disadvantages of these devices and outlines the future prospects for experimental research.

  13. Reconceptualizing Working Memory in Educational Research

    Science.gov (United States)

    Fenesi, Barbara; Sana, Faria; Kim, Joseph A.; Shore, David I.

    2015-01-01

    In recent years, research from cognitive science has provided a solid theoretical framework to develop evidence-based interventions in education. In particular, research into reading, writing, language, mathematics and multimedia learning has been guided by the application of Baddeley's multicomponent model of working memory. However, an…

  14. Methodological triangulation in work life research

    DEFF Research Database (Denmark)

    Warring, Niels

    Based on examples from two research projects on preschool teachers' work, the paper will discuss potentials and challenges in methodological triangulation in work life research. Analysis of ethnographic and phenomenological inspired observations of everyday life in day care centers formed the basis...... for individual interviews and informal talks with employees. The interviews and conversations were based on a critical hermeneutic approach. The analysis of observations and interviews constituted a knowledge base as the project went in to the last phase: action research workshops. In the workshops findings from...

  15. Use Cases of Discrete Event Simulation Appliance and Research

    CERN Document Server

    2012-01-01

    Over the last decades Discrete Event Simulation has conquered many different application areas. This trend is, on the one hand, driven by an ever wider use of this technology in different fields of science and on the other hand by an incredibly creative use of available software programs through dedicated experts. This book contains articles from scientists and experts from 10 countries. They illuminate the width of application of this technology and the quality of problems solved using Discrete Event Simulation. Practical applications of simulation dominate in the present book.   The book is aimed to researchers and students who deal in their work with Discrete Event Simulation and which want to inform them about current applications. By focusing on discrete event simulation, this book can also serve as an inspiration source for practitioners for solving specific problems during their work. Decision makers who deal with the question of the introduction of discrete event simulation for planning support and o...

  16. Simulation of a pool type research reactor

    International Nuclear Information System (INIS)

    Oliveira, Andre Felipe da Silva de; Moreira, Maria de Lourdes

    2011-01-01

    Computational fluid dynamic is used to simulate natural circulation condition after a research reactor shutdown. A benchmark problem was used to test the viability of usage such code to simulate the reactor model. A model which contains the core, the pool, the reflector tank, the circulation pipes and chimney was simulated. The reactor core contained in the full scale model was represented by a porous media. The parameters of porous media were obtained from a separate CFD analysis of the full core model. Results demonstrate that such studies can be carried out for research and test of reactors design. (author)

  17. Bubbler condenser related research work. Present situation

    International Nuclear Information System (INIS)

    2001-02-01

    Intensive discussions within the OECD Support Group on 'VVER-440 Bubbler Condenser Containment Research Work' between 1991 and 1994 demonstrated the need for supplementary research work to achieve an adequate level of basic knowledge. In 1994, the European Commission (EC) asked for a specific 'VVER-440/213 Bubble Condenser Qualification Feasibility Study', which was finished early in 1996, confirming the need for additional research in this field. The Feasibility study formed the basis for the Bubble Condenser Experimental Qualification Project (BCEQ) with two separate experimental activities to be executed within the frame of the PHARE/TACIS 2.13/95 project of the European Commission. A first activity served to study the thermal-hydraulic phenomena and the associated structure dynamic interactions. This part of the project was performed at EREC, in Elektrogorsk, Russia. The design of the test facility was based on the prototypical bubbler condenser configuration for the Hungarian Paks nuclear power plant. A second activity addressed the structural integrity of certain components of the bubbler condenser steel structures under DBA-typical conditions. This part of the project was performed at VUEZ, in Levice, Slovak Republic. The design of the components of this facility was based on the structural properties of the Dukovany and/or Bohunice nuclear power plants. A third component of the BCEQ project was specified later asking for analytical studies, which should be supported by a number of small-scale separate effects tests to be performed at SVUSS, in Bechovice, Czech Republic. The main experimental and analytical results of the BCEQ test campaigns have been presented and discussed within the frame of the 4. meeting of the Technical Advisory Committee to the BCEQ (Bubble Condenser Experimental Qualification) Project in Brussels in December 1999 and on occasion of the 11. OECD Support Group Meeting in Berlin in April 2000. The discussions had evidenced several

  18. Methodological aspects of shift-work research.

    Science.gov (United States)

    Knutsson, Anders

    2004-01-01

    A major issue in shift-work research is to understand the possible ways in which shift work can impact performance and health. Nearly all body functions, from those of the cellular level to those of the entire body, are circadian rhythmic. Disturbances of these rhythms as well as the social consequences of odd work hours are of importance for the health and well-being of shift workers. This article reviews a number of common methodological issues which are of relevance to epidemiological studies in this area of research. It discusses conceptual problems regarding the use of the term "shift work," and it underscores the need to develop models that explain the mechanisms of disease in shift workers.

  19. 78 FR 63459 - GPS Satellite Simulator Control Working Group Meeting

    Science.gov (United States)

    2013-10-24

    ... DEPARTMENT OF DEFENSE Air Force GPS Satellite Simulator Control Working Group Meeting AGENCY: Department of the Air Force. ACTION: Meeting Notice. SUMMARY: This meeting notice is to inform GPS simulator manufacturers, who supply products to the Department of Defense (DoD), and GPS simulator users, both government...

  20. 78 FR 67132 - GPS Satellite Simulator Control Working Group Meeting

    Science.gov (United States)

    2013-11-08

    ... DEPARTMENT OF DEFENSE Department of the Air Force GPS Satellite Simulator Control Working Group... simulator manufacturers, who supply products to the Department of Defense (DoD), and GPS simulator users..., and email address) to [email protected]us.af.mil and have your security personnel submit your VAR...

  1. Participatory ergonomics simulation of hospital work systems: The influence of simulation media on simulation outcome.

    Science.gov (United States)

    Andersen, Simone Nyholm; Broberg, Ole

    2015-11-01

    Current application of work system simulation in participatory ergonomics (PE) design includes a variety of different simulation media. However, the actual influence of the media attributes on the simulation outcome has received less attention. This study investigates two simulation media: full-scale mock-ups and table-top models. The aim is to compare, how the media attributes of fidelity and affordance influence the ergonomics identification and evaluation in PE design of hospital work systems. The results illustrate, how the full-scale mock-ups' high fidelity of room layout and affordance of tool operation support ergonomics identification and evaluation related to the work system entities space and technologies & tools. The table-top models' high fidelity of function relations and affordance of a helicopter view support ergonomics identification and evaluation related to the entity organization. Furthermore, the study addresses the form of the identified and evaluated conditions, being either identified challenges or tangible design criteria. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  2. The effects of fatigue on performance in simulated nursing work.

    Science.gov (United States)

    Barker, Linsey M; Nussbaum, Maury A

    2011-09-01

    Fatigue is associated with increased rates of medical errors and healthcare worker injuries, yet existing research in this sector has not considered multiple dimensions of fatigue simultaneously. This study evaluated hypothesised causal relationships between mental and physical fatigue and performance. High and low levels of mental and physical fatigue were induced in 16 participants during simulated nursing work tasks in a laboratory setting. Task-induced changes in fatigue dimensions were quantified using both subjective and objective measures, as were changes in performance on physical and mental tasks. Completing the simulated work tasks increased total fatigue, mental fatigue and physical fatigue in all experimental conditions. Higher physical fatigue adversely affected measures of physical and mental performance, whereas higher mental fatigue had a positive effect on one measure of mental performance. Overall, these results suggest causal effects between manipulated levels of mental and physical fatigue and task-induced changes in mental and physical performance. STATEMENT OF RELEVANCE: Nurse fatigue and performance has implications for patient and provider safety. Results from this study demonstrate the importance of a multidimensional view of fatigue in understanding the causal relationships between fatigue and performance. The findings can guide future work aimed at predicting fatigue-related performance decrements and designing interventions.

  3. The Workings of a Multicultural Research Team

    Science.gov (United States)

    Friedemann, Marie-Luise; Pagan-Coss, Harald; Mayorga, Carlos

    2013-01-01

    Purpose Transcultural nurse researchers are exposed to the challenges of developing and maintaining a multiethnic team. With the example of a multicultural research study of family caregivers conducted in the Miami-Dade area, the authors guide the readers through steps of developing a culturally competent and effective team. Design Pointing out challenges and successes, the authors illustrate team processes and successful strategies relative to recruitment of qualified members, training and team maintenance, and evaluation of team effectiveness. Method With relevant concepts from the literature applied to practical examples, the authors demonstrate how cultural team competence grows in a supportive work environment. PMID:18390824

  4. New working paradigms in research laboratories.

    Science.gov (United States)

    Keighley, Wilma; Sewing, Andreas

    2009-07-01

    Work in research laboratories, especially within centralised functions in larger organisations, is changing fast. With easier access to external providers and Contract Research Organisations, and a focus on budgets and benchmarking, scientific expertise has to be complemented with operational excellence. New concepts, globally shared projects and restricted resources highlight the constraints of traditional operating models working from Monday to Friday and nine to five. Whilst many of our scientists welcome this new challenge, organisations have to enable and foster a more business-like mindset. Organisational structures, remuneration, as well as systems in finance need to be adapted to build operations that are best-in-class rather than merely minimising negative impacts of current organisational structures.

  5. Researching Practice Wisdom in Social Work

    Directory of Open Access Journals (Sweden)

    Johnson Chun-Sing Cheung

    2016-09-01

    Full Text Available Researching practice wisdom in social work Social workers, as skilled helpers who make professional decisions using intuitive actions rather than by following defined rules, deserve better recognition for their practice wisdom. However, since there is a tendency amongst practitioners who adhere to the evidence-based paradigm to disregard practitioners’ knowledge, empirical research on practice wisdom in social work needs to be encouraged. The author argues that the lack of a sound methodology hinders the development of such an invaluable asset for practitioners. It is suggested that a heuristic paradigm that embraces the concepts of tacit knowing, intuition and indwelling will provide a way forward towards recognizing the importance of social workers’ practice wisdom.

  6. Research work for improving LWR safety

    International Nuclear Information System (INIS)

    Bork, G.

    1993-09-01

    The work performed in 1992 for the PSF project centers on various phenomena of severe fuel damage and on selected aspects of a core meltdown accident, relating to aerosol behaviour and filter engineering, and to methods of assessing and minimizing the radiological impacts of a reactor accident. The 1992 task programme of the project included research into extreme load conditions affecting the containment in a core meltdown accident: first results are given of the experiments performed. (orig./HP) [de

  7. Research in adaptive management: working relations and the research process.

    Science.gov (United States)

    Amanda C. Graham; Linda E. Kruger

    2002-01-01

    This report analyzes how a small group of Forest Service scientists participating in efforts to implement adaptive management approach working relations, and how they understand and apply the research process. Nine scientists completed a questionnaire to assess their preferred mode of thinking (the Herrmann Brain Dominance Instrument), engaged in a facilitated...

  8. Simulation tools for robotics research and assessment

    Science.gov (United States)

    Fields, MaryAnne; Brewer, Ralph; Edge, Harris L.; Pusey, Jason L.; Weller, Ed; Patel, Dilip G.; DiBerardino, Charles A.

    2016-05-01

    The Robotics Collaborative Technology Alliance (RCTA) program focuses on four overlapping technology areas: Perception, Intelligence, Human-Robot Interaction (HRI), and Dexterous Manipulation and Unique Mobility (DMUM). In addition, the RCTA program has a requirement to assess progress of this research in standalone as well as integrated form. Since the research is evolving and the robotic platforms with unique mobility and dexterous manipulation are in the early development stage and very expensive, an alternate approach is needed for efficient assessment. Simulation of robotic systems, platforms, sensors, and algorithms, is an attractive alternative to expensive field-based testing. Simulation can provide insight during development and debugging unavailable by many other means. This paper explores the maturity of robotic simulation systems for applications to real-world problems in robotic systems research. Open source (such as Gazebo and Moby), commercial (Simulink, Actin, LMS), government (ANVEL/VANE), and the RCTA-developed RIVET simulation environments are examined with respect to their application in the robotic research domains of Perception, Intelligence, HRI, and DMUM. Tradeoffs for applications to representative problems from each domain are presented, along with known deficiencies and disadvantages. In particular, no single robotic simulation environment adequately covers the needs of the robotic researcher in all of the domains. Simulation for DMUM poses unique constraints on the development of physics-based computational models of the robot, the environment and objects within the environment, and the interactions between them. Most current robot simulations focus on quasi-static systems, but dynamic robotic motion places an increased emphasis on the accuracy of the computational models. In order to understand the interaction of dynamic multi-body systems, such as limbed robots, with the environment, it may be necessary to build component

  9. Comparing three methods for participatory simulation of hospital work systems

    DEFF Research Database (Denmark)

    Broberg, Ole; Andersen, Simone Nyholm

    Summative Statement: This study compared three participatory simulation methods using different simulation objects: Low resolution table-top setup using Lego figures, full scale mock-ups, and blueprints using Lego figures. It was concluded the three objects by differences in fidelity and affordance...... scenarios using the objects. Results: Full scale mock-ups significantly addressed the local space and technology/tool elements of a work system. In contrast, the table-top simulation object addressed the organizational issues of the future work system. The blueprint based simulation addressed...

  10. Working through Challenges in Doing Interview Research

    Directory of Open Access Journals (Sweden)

    Kathryn Roulston PhD

    2011-12-01

    Full Text Available Recent methodological work that draws on a ‘constructionist’ approach to interviewing - conceptualizes the interview as a socially-situated encounter in which both interviewer and interviewee play active roles. This approach takes the construction of interview data as a topic of examination. This article adopts the view that close examination of how particular interactions are accomplished provides additional insights into not only the topics discussed, but also how research design and methods might be modified to meet the needs of projects. Focus is specifically given to investigation of sequences observed as puzzling or challenging during interviews, or via interview data that emerged as problematic in the analysis process. How might close analyses of these sorts of sequences be used to inform research design and interview methods? The article explores (1 how problematic interactions identified in the analysis of focus group data can lead to modifications in research design, (2 an approach to dealing with reported data in representations of findings, and (3 how data analysis can inform question formulation in successive rounds of data generation. Findings from these types of examinations of interview data generation and analysis are valuable for informing both interview practice as well as research design in further research.

  11. Use cases of discrete event simulation. Appliance and research

    Energy Technology Data Exchange (ETDEWEB)

    Bangsow, Steffen (ed.)

    2012-11-01

    Use Cases of Discrete Event Simulation. Includes case studies from various important industries such as automotive, aerospace, robotics, production industry. Written by leading experts in the field. Over the last decades Discrete Event Simulation has conquered many different application areas. This trend is, on the one hand, driven by an ever wider use of this technology in different fields of science and on the other hand by an incredibly creative use of available software programs through dedicated experts. This book contains articles from scientists and experts from 10 countries. They illuminate the width of application of this technology and the quality of problems solved using Discrete Event Simulation. Practical applications of simulation dominate in the present book. The book is aimed to researchers and students who deal in their work with Discrete Event Simulation and which want to inform them about current applications. By focusing on discrete event simulation, this book can also serve as an inspiration source for practitioners for solving specific problems during their work. Decision makers who deal with the question of the introduction of discrete event simulation for planning support and optimization this book provides a contribution to the orientation, what specific problems could be solved with the help of Discrete Event Simulation within the organization.

  12. Scalable Atomistic Simulation Algorithms for Materials Research

    Directory of Open Access Journals (Sweden)

    Aiichiro Nakano

    2002-01-01

    Full Text Available A suite of scalable atomistic simulation programs has been developed for materials research based on space-time multiresolution algorithms. Design and analysis of parallel algorithms are presented for molecular dynamics (MD simulations and quantum-mechanical (QM calculations based on the density functional theory. Performance tests have been carried out on 1,088-processor Cray T3E and 1,280-processor IBM SP3 computers. The linear-scaling algorithms have enabled 6.44-billion-atom MD and 111,000-atom QM calculations on 1,024 SP3 processors with parallel efficiency well over 90%. production-quality programs also feature wavelet-based computational-space decomposition for adaptive load balancing, spacefilling-curve-based adaptive data compression with user-defined error bound for scalable I/O, and octree-based fast visibility culling for immersive and interactive visualization of massive simulation data.

  13. A study of the use of simulated work task situations in interactive information retrieval evaluations

    DEFF Research Database (Denmark)

    Borlund, Pia

    2016-01-01

    Purpose – The purpose of this paper is to report a study of how the test instrument of a simulated work task situation is used in empirical evaluations of interactive information retrieval (IIR) and reported in the research literature. In particular, the author is interested to learn whether....... The paper addresses the need to carefully design and tailor simulated work task situations to suit the test participants in order to obtain the intended authentic and realistic IIR under study. Keywords Interactive information retrieval study, IIR study, Test design, Simulated work task situations, Meta-evaluation...... situations in IIR evaluations. In particular, with respect to the design and creation of realistic simulated work task situations. There is a lack of tailoring of the simulated work task situations to the test participants. Likewise, the requirement to include the test participants’ personal information...

  14. [Animal experimentation, computer simulation and surgical research].

    Science.gov (United States)

    Carpentier, Alain

    2009-11-01

    We live in a digital world In medicine, computers are providing new tools for data collection, imaging, and treatment. During research and development of complex technologies and devices such as artificial hearts, computer simulation can provide more reliable information than experimentation on large animals. In these specific settings, animal experimentation should serve more to validate computer models of complex devices than to demonstrate their reliability.

  15. Europlanet Research Infrastructure: Planetary Simulation Facilities

    Science.gov (United States)

    Davies, G. R.; Mason, N. J.; Green, S.; Gómez, F.; Prieto, O.; Helbert, J.; Colangeli, L.; Srama, R.; Grande, M.; Merrison, J.

    2008-09-01

    EuroPlanet The Europlanet Research Infrastructure consortium funded under FP7 aims to provide the EU Planetary Science community greater access for to research infrastructure. A series of networking and outreach initiatives will be complimented by joint research activities and the formation of three Trans National Access distributed service laboratories (TNA's) to provide a unique and comprehensive set of analogue field sites, laboratory simulation facilities, and extraterrestrial sample analysis tools. Here we report on the infrastructure that comprises the second TNA; Planetary Simulation Facilities. 11 laboratory based facilities are able to recreate the conditions found in the atmospheres and on the surfaces of planetary systems with specific emphasis on Martian, Titan and Europa analogues. The strategy has been to offer some overlap in capabilities to ensure access to the highest number of users and to allow for progressive and efficient development strategies. For example initial testing of mobility capability prior to the step wise development within planetary atmospheres that can be made progressively more hostile through the introduction of extreme temperatures, radiation, wind and dust. Europlanet Research Infrastructure Facilties: Mars atmosphere simulation chambers at VUA and OU These relatively large chambers (up to 1 x 0.5 x 0.5 m) simulate Martian atmospheric conditions and the dual cooling options at VUA allows stabilised instrument temperatures while the remainder of the sample chamber can be varied between 220K and 350K. Researchers can therefore assess analytical protocols for instruments operating on Mars; e.g. effect of pCO2, temperature and material (e.g., ± ice) on spectroscopic and laser ablation techniques while monitoring the performance of detection technologies such as CCD at low T & variable p H2O & pCO2. Titan atmosphere and surface simulation chamber at OU The chamber simulates Titan's atmospheric composition under a range of

  16. It Worked There. Will It Work Here? Researching Teaching Methods

    Science.gov (United States)

    Davis, Andrew

    2017-01-01

    "It worked there. Will it work here?" We have to be able to identify the "it" in that aphoristic question. Classifications of teaching methods belong in the social realm, where human intentions play a fundamental role in how phenomena are categorized. The social realm is characterized with the help of John Searle. Social…

  17. Simulations with Elaborated Worked Example Modeling: Beneficial Effects on Schema Acquisition

    Science.gov (United States)

    Meier, Debra K.; Reinhard, Karl J.; Carter, David O.; Brooks, David W.

    2008-01-01

    Worked examples have been effective in enhancing learning outcomes, especially with novice learners. Most of this research has been conducted in laboratory settings. This study examined the impact of embedding elaborated worked example modeling in a computer simulation practice activity on learning achievement among 39 undergraduate students…

  18. 77 FR 70421 - GPS Satellite Simulator Control Working Group Meeting

    Science.gov (United States)

    2012-11-26

    ... DEPARTMENT OF DEFENSE Department of the Air Force GPS Satellite Simulator Control Working Group Meeting AGENCY: Space and Missile Systems Center, Global Positioning Systems (GPS) Directorate, Department of the Air Force, DoD. ACTION: Meeting Notice. SUMMARY: This meeting notice is to inform GPS...

  19. Molecular simulation studies on thermophysical properties with application to working fluids

    CERN Document Server

    Raabe, Gabriele

    2017-01-01

    This book discusses the fundamentals of molecular simulation, starting with the basics of statistical mechanics and providing introductions to Monte Carlo and molecular dynamics simulation techniques. It also offers an overview of force-field models for molecular simulations and their parameterization, with a discussion of specific aspects. The book then summarizes the available know-how for analyzing molecular simulation outputs to derive information on thermophysical and structural properties. Both the force-field modeling and the analysis of simulation outputs are illustrated by various examples. Simulation studies on recently introduced HFO compounds as working fluids for different technical applications demonstrate the value of molecular simulations in providing predictions for poorly understood compounds and gaining a molecular-level understanding of their properties. This book will prove a valuable resource to researchers and students alike.

  20. Qualitative Research in Group Work: Status, Synergies, and Implementation

    Science.gov (United States)

    Rubel, Deborah; Okech, Jane E. Atieno

    2017-01-01

    The article aims to advance the use of qualitative research methods to understand group work. The first part of this article situates the use of qualitative research methods in relationship to group work research. The second part examines recent qualitative group work research using a framework informed by scoping and systematic review methods and…

  1. Participatory action research as work stress intervention

    NARCIS (Netherlands)

    Dollard, M.F.; Blanc, Le P.M.; Cotton, S.J.; Naswal, K.; Hellgren, J.; Sverke, M.

    2008-01-01

    Working life has been the subject of great change in recent years with contemporary conditions generally providing increased opportunities and autonomy for individuals. But these benefits can coincide with greater demands and responsibilities, increasing the pressure to work outside of traditional

  2. A research reactor simulator for operators training and teaching

    International Nuclear Information System (INIS)

    De Carvalho, R. P.; Maiorino, J. R.

    2006-01-01

    This work describes a training simulator of Research Reactors (RR). The simulator is an interactive tool for teaching and operator training of the bases of the RR operation, reactor physics and thermal hydraulics. The Brazilian IEA-R1 RR was taken as the reference (default configuration). The implementation of the simulator consists of the modeling of the process and system (neutronics, thermal hydraulics), its numerical solution, and the implementation of the man-machine interface through visual interactive screens. The point kinetics model was used for the nuclear process and the heat and mass conservation models were used for the thermal hydraulic feed back in the average core channel. The heat exchanger and cooling tower were also modeled. The main systems were: the reactivity control system, including the automatic control, and the primary and secondary coolant systems. The Visual C++ was used to codes and graphics lay-outs. The simulator is to be used in a PC with Windows XP system. The simulator allows simulation in real time of start up, power maneuver, and shut down. (authors)

  3. HEP Software Foundation Community White Paper Working Group - Detector Simulation

    Energy Technology Data Exchange (ETDEWEB)

    Apostolakis, J; et al.

    2018-03-12

    A working group on detector simulation was formed as part of the high-energy physics (HEP) Software Foundation's initiative to prepare a Community White Paper that describes the main software challenges and opportunities to be faced in the HEP field over the next decade. The working group met over a period of several months in order to review the current status of the Full and Fast simulation applications of HEP experiments and the improvements that will need to be made in order to meet the goals of future HEP experimental programmes. The scope of the topics covered includes the main components of a HEP simulation application, such as MC truth handling, geometry modeling, particle propagation in materials and fields, physics modeling of the interactions of particles with matter, the treatment of pileup and other backgrounds, as well as signal processing and digitisation. The resulting work programme described in this document focuses on the need to improve both the software performance and the physics of detector simulation. The goals are to increase the accuracy of the physics models and expand their applicability to future physics programmes, while achieving large factors in computing performance gains consistent with projections on available computing resources.

  4. WDM Research Series: Working Paper No. 2

    International Development Research Centre (IDRC) Digital Library (Canada)

    IDRC CRDI

    The other three papers of the Series focus on the issues of institutional structures ... Any approach that relates WDM to poverty and equity requires a set of working ..... If local irrigation system operation and maintenance investments and.

  5. Women, Research Performance and Work Context

    Science.gov (United States)

    Dever, Maryanne; Morrison, Zoe

    2009-01-01

    This article presents findings from a qualitative study focused on the conditions that support high research productivity in women. Interviewees were all active researchers and many were national or international leaders in their respective fields. While personal factors such as motivation, focus, and good scholarly habits were identified as…

  6. WORKING TOGETHER: EDUCATION, RESEARCH AND DEVELOPMENT FOR 5G NETWORKS

    Directory of Open Access Journals (Sweden)

    E. P. Ivanova

    2015-12-01

    Full Text Available In the new world of globalization of ideas and mobility difficulties in knowledge diffusion still remains. The effectiveexchange of experiences and skills in new generation networks is not guaranteed by the enormous potentialsofinternetworking systems and devices. Conceptual model for performance modeling and evaluation of multiservicenetworks has been major interest for mobile networks providers. It is essential to assess the performance ofmobile system architectures in order to identify where potential bottlenecks and data packet blocking probabilityare possible to occur. Educational platforms, new simulations opportunities represent a good opportunity to reducethe digital divide and to ensure faster and higher communication trends. Several universities and companies arecurrently involved in using educational platforms to provide better results. Conceptual model for teletrafficengineering in educational platform and applications focuses on some important aspects: tutorials, exercise,simulations, and expectation values of parameters, testing and estimation of students work. In the same time thesame model is very appropriate for simulation of network management for the new generation networks. Thiseducational platform for academics, students and researchers, puts together some of the critical aspects ofdistributed systems and their characteristics, parameters and probability of blocking.

  7. On Research Work in Communication Departments

    OpenAIRE

    Marín Ardila, Luis Fernando; Pontificia Universidad Javeriana

    2010-01-01

    The gathering of multiple individuals dealing with different knowledge subject matters constitutes an enormous potential for any university. If this encounter is really translated into a lively academic community, the manifest result would be a condition of possibility whereby knowledge and information can be created, recreated, and given new meanings. Thus, research on or within communication, is in urgent need of links and shared languages: research requires reducing dispersion and facilita...

  8. Sex Work Research: Methodological and Ethical Challenges

    Science.gov (United States)

    Shaver, Frances M.

    2005-01-01

    The challenges involved in the design of ethical, nonexploitative research projects with sex workers or any other marginalized population are significant. First, the size and boundaries of the population are unknown, making it extremely difficult to get a representative sample. Second, because membership in hidden populations often involves…

  9. A Unique Software System For Simulation-to-Flight Research

    Science.gov (United States)

    Chung, Victoria I.; Hutchinson, Brian K.

    2001-01-01

    "Simulation-to-Flight" is a research development concept to reduce costs and increase testing efficiency of future major aeronautical research efforts at NASA. The simulation-to-flight concept is achieved by using common software and hardware, procedures, and processes for both piloted-simulation and flight testing. This concept was applied to the design and development of two full-size transport simulators, a research system installed on a NASA B-757 airplane, and two supporting laboratories. This paper describes the software system that supports the simulation-to-flight facilities. Examples of various simulation-to-flight experimental applications were also provided.

  10. Ethical Issues in the Research of Group Work

    Science.gov (United States)

    Goodrich, Kristopher M.; Luke, Melissa

    2017-01-01

    This article provides a primer for researchers exploring ethical issues in the research of group work. The article begins with an exploration of relevant ethical issues through the research process and current standards guiding its practice. Next, the authors identify resources that group work researchers can consult prior to constructing their…

  11. Proceedings of the meeting on large scale computer simulation research

    International Nuclear Information System (INIS)

    2004-04-01

    The meeting to summarize the collaboration activities for FY2003 on the Large Scale Computer Simulation Research was held January 15-16, 2004 at Theory and Computer Simulation Research Center, National Institute for Fusion Science. Recent simulation results, methodologies and other related topics were presented. (author)

  12. Results of research and development works 1982

    International Nuclear Information System (INIS)

    1983-02-01

    Arranged by main topics of research, the following contributions of the Institute are disposed as follows: 1. Fast Breeder Reactor Project (PSB) 1.1 Nuclear fuels and fuel elements 1.2 Cladding and core structure materials 1.3 Plant structure materials 1.4 Safety investigations 2. Nuclear Safety Project (PNS) 2.1 Fuel element behaviour during accidents 2.2 Core meltdown 3. Reprocessing and Waste Management Project (PWA) 4. Fusion technology (FT) 5. Innovations and new tasks (INNA). (orig./IHOe) [de

  13. Simulating Data for Clinical Research: A Tutorial

    Science.gov (United States)

    Beaujean, A. Alexander

    2018-01-01

    Simulation studies use computer-generated data to examine questions of interest that have traditionally been used to study properties of statistics and estimating algorithms. With the recent advent of powerful processing capabilities in affordable computers along with readily usable software, it is now feasible to use a simulation study to aid in…

  14. Randomly auditing research labs could be an affordable way to improve research quality: A simulation study.

    Science.gov (United States)

    Barnett, Adrian G; Zardo, Pauline; Graves, Nicholas

    2018-01-01

    The "publish or perish" incentive drives many researchers to increase the quantity of their papers at the cost of quality. Lowering quality increases the number of false positive errors which is a key cause of the reproducibility crisis. We adapted a previously published simulation of the research world where labs that produce many papers are more likely to have "child" labs that inherit their characteristics. This selection creates a competitive spiral that favours quantity over quality. To try to halt the competitive spiral we added random audits that could detect and remove labs with a high proportion of false positives, and also improved the behaviour of "child" and "parent" labs who increased their effort and so lowered their probability of making a false positive error. Without auditing, only 0.2% of simulations did not experience the competitive spiral, defined by a convergence to the highest possible false positive probability. Auditing 1.35% of papers avoided the competitive spiral in 71% of simulations, and auditing 1.94% of papers in 95% of simulations. Audits worked best when they were only applied to established labs with 50 or more papers compared with labs with 25 or more papers. Adding a ±20% random error to the number of false positives to simulate peer reviewer error did not reduce the audits' efficacy. The main benefit of the audits was via the increase in effort in "child" and "parent" labs. Audits improved the literature by reducing the number of false positives from 30.2 per 100 papers to 12.3 per 100 papers. Auditing 1.94% of papers would cost an estimated $15.9 million per year if applied to papers produced by National Institutes of Health funding. Our simulation greatly simplifies the research world and there are many unanswered questions about if and how audits would work that can only be addressed by a trial of an audit.

  15. Research work at the TRIGA Mainz reactor

    International Nuclear Information System (INIS)

    Trautmann, Norbert

    1976-01-01

    In the last two years the research activities at the TRIGA Mark II reactor in Mainz have mainly been concentrated on the investigation of short- lived nuclides of medium mass number produced by thermal-neutron induced fission of 235 U and other fissile materials. For the identification of these nuclides and for detailed studies of their properties rapid chemical separation procedures in combination with high-resolution gamma-ray and neutron spectroscopy as well as mass-separated samples have been used. Fast, discontinuous separation techniques are illustrated by a procedure for technetium. Continuous separation methods from aqueous solutions and in the gas phase, accomplished by combining a gas jet recoil transport system with an on-line operating solvent extraction technique and a thermo- chromatographic method, are presented. The application of such procedures to decay scheme and delayed neutron studies is demonstrated by a few examples. The experimental set-up and the method for nuclear spin - and magnetic moment measurements on alkali isotopes far from the region of beta-stability applying the nuclear radiation detected optical pumping technique to mass- separated samples of neutron-rich alkali nuclides are briefly described. (author)

  16. Conjugate heat transfer simulations of advanced research reactor fuel

    Energy Technology Data Exchange (ETDEWEB)

    Piro, M.H.A., E-mail: pirom@aecl.ca; Leitch, B.W.

    2014-07-01

    Highlights: • Temperature predictions are enhanced by coupling heat transfer in solid and fluid zones. • Seven different cases are considered to observe trends in predicted temperature and pressure. • The seven cases consider high/medium/low power, flow, burnup, fuel material and geometry. • Simulations provide temperature predictions for performance/safety. Boiling is unlikely. • Simulations demonstrate that a candidate geometry can enhance performance/safety. - Abstract: The current work presents numerical simulations of coupled fluid flow and heat transfer of advanced U–Mo/Al and U–Mo/Mg research reactor fuels in support of performance and safety analyses. The objective of this study is to enhance predictions of the flow regime and fuel temperatures through high fidelity simulations that better capture various heat transfer pathways and with a more realistic geometric representation of the fuel assembly in comparison to previous efforts. Specifically, thermal conduction, convection and radiation mechanisms are conjugated between the solid and fluid regions. Also, a complete fuel element assembly is represented in three dimensional space, permitting fluid flow and heat transfer to be simulated across the entire domain. Seven case studies are examined that vary the coolant inlet conditions, specific power, and burnup to investigate the predicted changes in the pressure drop in the coolant and the fuel, clad and coolant temperatures. In addition, an alternate fuel geometry is considered with helical fins (replacing straight fins in the existing design) to investigate the relative changes in predicted fluid and solid temperatures. Numerical simulations predict that the clad temperature is sensitive to changes in the thermal boundary layer in the coolant, particularly in simultaneously developing flow regions, while the temperature in the fuel is anticipated to be unaffected. Finally, heat transfer between fluid and solid regions is enhanced with

  17. Research in Modeling and Simulation for Airspace Systems Innovation

    Science.gov (United States)

    Ballin, Mark G.; Kimmel, William M.; Welch, Sharon S.

    2007-01-01

    This viewgraph presentation provides an overview of some of the applied research and simulation methodologies at the NASA Langley Research Center that support aerospace systems innovation. Risk assessment methodologies, complex systems design and analysis methodologies, and aer ospace operations simulations are described. Potential areas for future research and collaboration using interactive and distributed simula tions are also proposed.

  18. Shaping Social Work Science: What Should Quantitative Researchers Do?

    Science.gov (United States)

    Guo, Shenyang

    2015-01-01

    Based on a review of economists' debates on mathematical economics, this article discusses a key issue for shaping the science of social work--research methodology. The article describes three important tasks quantitative researchers need to fulfill in order to enhance the scientific rigor of social work research. First, to test theories using…

  19. Consciousness and working memory: Current trends and research perspectives.

    Science.gov (United States)

    Velichkovsky, Boris B

    2017-10-01

    Working memory has long been thought to be closely related to consciousness. However, recent empirical studies show that unconscious content may be maintained within working memory and that complex cognitive computations may be performed on-line. This promotes research on the exact relationships between consciousness and working memory. Current evidence for working memory being a conscious as well as an unconscious process is reviewed. Consciousness is shown to be considered a subset of working memory by major current theories of working memory. Evidence for unconscious elements in working memory is shown to come from visual masking and attentional blink paradigms, and from the studies of implicit working memory. It is concluded that more research is needed to explicate the relationship between consciousness and working memory. Future research directions regarding the relationship between consciousness and working memory are discussed. Copyright © 2017 Elsevier Inc. All rights reserved.

  20. Medical simulation in interventional cardiology: "More research is needed".

    Science.gov (United States)

    Tajti, Peter; Brilakis, Emmanouil S

    2018-05-01

    Medical simulation is being used for training fellows to perform coronary angiography. Medical simulation training was associated with 2 min less fluoroscopy time per case after adjustment. Whether medical simulation really works needs to be evaluated in additional, well-designed and executed clinical studies. © 2018 Wiley Periodicals, Inc.

  1. [Organisation of scientific and research work of Navy medical service].

    Science.gov (United States)

    Gavrilov, V V; Myznikov, I L; Kuz'minov, O V; Shmelev, S V; Oparin, M Iu

    2013-03-01

    The main issues of organization of scientific and research work of medical service in the North Fleet are considered in the present article. Analysis of some paragraphs of documents, regulating this work at army level is given. The authors give an example of successful experience of such work in the North Fleet, table some suggestions which allow to improve the administration of scientific and research work in the navy and also on the district scale.

  2. Conceptualizing Policy Work as Activity and Field of Research

    OpenAIRE

    Jan Kohoutek; Martin Nekola; Vilém Novotný

    2013-01-01

    The area of policy work and policy workers within government bureaucracies is encompassing a large field of activities and research. This article aims to provide a synthesised perspective on policy work in relating theoretical and empirical accounts of policy workers, identifying points of convergence and linking them to essential assumptions on research in policy work. We conceptualize policy work as activity within government bureaucracies from three interrelated perspectives: the professio...

  3. Research workshop to research work: initial steps in establishing health research systems on Malaita, Solomon Islands

    Directory of Open Access Journals (Sweden)

    Kekuabata Esau

    2010-10-01

    Full Text Available Abstract Introduction Atoifi Adventist Hospital is a 90 bed general hospital in East Kwaio, Malaita, Solomon Islands providing services to the population of subsistence villagers of the region. Health professionals at the hospital and attached College of Nursing have considerable human capacity and willingness to undertake health research. However they are constrained by limited research experience, training opportunities, research systems, physical infrastructure and access to resources. This brief commentary describes an 'Introduction to Health Research' workshop delivered at Atoifi Adventist Hospital in September 2009 and efforts to move from 'research workshop' to 'research work'. The Approach Using a participatory-action research approach underpinned by decolonising methodologies, staff from Atoifi Adventist Hospital and James Cook University (Queensland, Australia collaboratively designed, implemented and evaluated a health research workshop. Basic health research principles and methods were presented using active learning methodologies. Following the workshop, Atoifi Adventist Hospital and Atoifi College of Nursing staff, other professionals and community members reported an increased awareness and understanding of health research. The formation of a local Research Committee, improved ethics review procedures and the identification of local research mentors followed the week long workshop. The workshop has acted as a catalyst for research activity, increasing structural and human resource capacity for local health professionals and community leaders to engage in research. Discussion and Conclusions Participants from a variety of educational backgrounds participated in, and received benefit from, a responsive, culturally and linguistically accessible health research workshop. Improving health research systems at a remote hospital and aligning these with local and national research agendas is establishing a base to strengthen public health

  4. The Research on Modeling and Simulation of TFE Polymerization Process

    Directory of Open Access Journals (Sweden)

    Jing Gao Sun

    2014-01-01

    Full Text Available PTFE (polytetrafluoroethylene is the fluorinated straight-chain polymer, made by the polymerization of tetrafluoroethylene monomer; it is used widely because of its excellent performance and can be obtained by the polymerization of body, solutions, suspensions, and emulsions. But only the last two are the main ways. This research paper makes simulation based on Polymer Plus. It uses the emulsion polymerization method at background to carry out a semibatch reactor system. Upon the actual production conditions, simulation process under the steady state conditions is used to analyze the effects of the changes on operating conditions; the corresponding dynamic model is created to analyze the impact of the changes of conditions on the entire system. Moreover, the amount of APS which plays an important part in this reaction is discussed for getting the most suitable amount of initiator. Because of less research work on this job, it is so difficult to find the related data from the literature. Therefore, this research will have a great significance for the process of the tetrafluoroethylene emulsion polymerization in the future.

  5. Reactor numerical simulation and hydraulic test research

    International Nuclear Information System (INIS)

    Yang, L. S.

    2009-01-01

    In recent years, the computer hardware was improved on the numerical simulation on flow field in the reactor. In our laboratory, we usually use the Pro/e or UG commercial software. After completed topology geometry, ICEM-CFD is used to get mesh for computation. Exact geometrical similarity is maintained between the main flow paths of the model and the prototype, with the exception of the core simulation design of the fuel assemblies. The drive line system is composed of drive mechanism, guide bush assembly, fuel assembly and control rod assembly, and fitted with the rod level indicator and drive mechanism power device

  6. Literature for flight simulator (motion) requirements research

    Science.gov (United States)

    2010-10-29

    This is the yearly snapshot of the literature examined in the framework of the Federal Aviation Administration/Volpe Center Flight Simulator Human Factors Program and entered in an EndNote database. It describes 1131 documents, 118 more than last y...

  7. Biosocial Research in Social Work Journals: A Systematic Review

    Science.gov (United States)

    Maynard, Brandy R.; Boutwell, Brian B.; Vaughn, Michael G.; Naeger, Sandra; Dell, Nathaniel

    2018-01-01

    Background: Despite an emphasis on a biopsychosocial understanding of human behavior and the relevance of biosocial research to social work practice, it is unclear whether social work is contributing to biosocial research and knowledge. Methods: Systematic review procedures were employed to locate studies that included biological variables (e.g.,…

  8. Simulation of unexpected events in using controlled working time

    International Nuclear Information System (INIS)

    Ruzicka, F.; Kindler, E.

    1987-01-01

    The RHYTHMS data base is described for random and rhythmic processes, constructed using the SIMULA programming language. An example is shown of its application in the simulation of accidents in discharging radioactive wastes from a bituminization line in a nuclear power plant. The radioactive waste is embedded in bitumen and shipped in unsealed drums. Normal operation envisages such processing of a certain number of drums during one shift. However, an accident can happen whose elimination takes a certain time. The possibility is also considered of personnel exposure and the necessity of replacing the exposed personnel. The selection of the correct solution is then given by the capability of removing all drums and by the determination of the number of work teams that have to be employed for the removal. Object-oriented programming was applied in the solution of the base. (J.B.). 3 refs

  9. Social work and power : theoretical background for research

    OpenAIRE

    Švedaitė-Sakalauskė, Birutė; Buzaitytė-Kašalynienė, Jolita

    2014-01-01

    Power and social work are concurrent, because every help (every relation) are always related with power and dependency. A research of phenomenon of power in social work almost hasn’t existed in Lithuania till now. The research could be unfolded on three levels: micro – the level of social work intervention, mezzo – the level of organization of social work, and macro – the level of power of social work profession in the society. The paper aims to discuss fundamental concepts and several theore...

  10. Using a Research Simulator for Validating Control Room Modernization Concepts

    International Nuclear Information System (INIS)

    Boring, Ronald L.; Agarwal, Vivek; Persensky, Julius J.; Joe, Jeffrey C.

    2012-01-01

    The Light Water Reactor Sustainability Program is a research, development, and deployment program sponsored by the United States Department of Energy. The program is operated in close collaboration with industry research and development programs to provide the technical foundations for licensing and managing the long-term, safe, and economical operation of nuclear power plants that are currently in operation. Advanced instrumentation and control (I and C) technologies are needed to support the continued safe and reliable production of power from nuclear energy systems during sustained periods of operation up to and beyond their expected licensed lifetime. This requires that new capabilities to achieve process control be developed and eventually implemented in existing nuclear control rooms. It also requires that approaches be developed and proven to achieve sustainability of I and C systems throughout the period of extended operation. Idaho National Laboratory (INL) is working closely with nuclear utilities to develop technologies and solutions to help ensure the safe life extension of current reactors. One of the main areas of focus is control room modernization. Current analog control rooms are growing obsolete, and it is difficult for utilities to maintain them. Using its reconfigurable control room simulator adapted from a training simulator, INL serves as a neutral test bed for implementing new control room system technologies and assisting in control room modernization efforts across. (author)

  11. Using a Research Simulator for Validating Control Room Modernization Concepts

    Energy Technology Data Exchange (ETDEWEB)

    Ronald L. Boring; Vivek Agarwal; Julius J. Persensky; Jeffrey C. Joe

    2012-05-01

    The Light Water Reactor Sustainability Program is a research, development, and deployment program sponsored by the United States Department of Energy. The program is operated in close collaboration with industry research and development programs to provide the technical foundations for licensing and managing the long-term, safe, and economical operation of nuclear power plants that are currently in operation. Advanced instrumentation and control (I&C) technologies are needed to support the continued safe and reliable production of power from nuclear energy systems during sustained periods of operation up to and beyond their expected licensed lifetime. This requires that new capabilities to achieve process control be developed and eventually implemented in existing nuclear control rooms. It also requires that approaches be developed and proven to achieve sustainability of I&C systems throughout the period of extended operation. Idaho National Laboratory (INL) is working closely with nuclear utilities to develop technologies and solutions to help ensure the safe life extension of current reactors. One of the main areas of focus is control room modernization. Current analog control rooms are growing obsolete, and it is difficult for utilities to maintain them. Using its reconfigurable control room simulator adapted from a training simulator, INL serves as a neutral test bed for implementing new control room system technologies and assisting in control room modernization efforts across.

  12. Karlsruhe Nuclear Research Center, Institute for Meteorology and Climate Research. Progress report on research and development work in 1993

    International Nuclear Information System (INIS)

    1994-03-01

    The Institute for Meteorology and Climate Research is operated by Karlsruhe Nuclear Research Centre in cooperation with Karlsruhe University. It investigates mesoscale and global atmospheric processes. Work on mesoscale processes focuses on interactions between atmosphere, soil and vegetation via the exchange of momentum, energy, water, and materials. Another field of primary interest are the flow processes and turbulent exchange processes in the lower troposphere. Parallel to the experiments, numerical simulation models for describing and predicting mesospheric climate-relevant processes and atmospheric exchange processes were used and improved upon. For remote processing of atmospheric parameters, a satellite-based data processing system was used for recording land surface parameters and vertical profiles and meteorological variables that are applicable for climatological studies and for the validation of numerical models. For recording and interpretation of the spatial and time-dependent distribution of trace elements, measuring instruments in the field of air chemistry were newly developed or improved upon, especially with a view towards high time resolution of the measured data. Ozone research is a key issue of the remote measurements. Contributions were made primarily in the framework of international research programmes (e.g. EASOE) on the degradation of the atmospheric ozone layer in the higher latitudes of the northern hemisphere. In addition to the experimental investigations, the transport of stratospheric trace elements was simulated numerically. (orig./KW) [de

  13. Simulation and Experimental Works of Quadcopter Model for Simple Maneuver

    Directory of Open Access Journals (Sweden)

    Rafiuddin Syam

    2017-03-01

    Full Text Available This study aims to create a simulated and experimental of aircraft movements for multirotor quadcopter. The research method is theoretical and experimental methods. For theoretical method consists of calculating the dynamics and kinematics. While the experimental method consists of the aircraft testing and processing of GPS data recorded aircraft. The results showed that the acceleration acting on the aircraft is large enough that x ̈ = 1.751 m/s2, y = 2.038 m /s2 = 1.6371 m danz ̈ / s2, (2 the value of the maximum error between the theoretical and the actual movement is ex = 0.682 m; ey and ez = 0.353 m = 0.546 m. Theoretical movement pattern already resembles the actual movement

  14. Simulation and Experimental Works of Quadcopter Model for Simple Maneuver

    Directory of Open Access Journals (Sweden)

    Rafiuddin Syam

    2015-03-01

    Full Text Available This study aims to create a simulated and experimental of aircraft movements for multirotor quadcopter. The research method is theoretical and experimental methods. For theoretical method consists of calculating the dynamics and kinematics. While the experimental method consists of the aircraft testing and processing of GPS data recorded aircraft. The results showed that the acceleration acting on the aircraft is large enough that x ̈ = 1.751 m/s2, y = 2.038 m /s2 = 1.6371 m and z ̈ / s2, (2 the value of the maximum error between the theoretical and the actual movement is ex = 0.682 m; ey and ez = 0.353 m = 0.546 m. Theoretical movement pattern already resembles the actual movement.

  15. An Open Source-based Approach to the Development of Research Reactor Simulator

    International Nuclear Information System (INIS)

    Joo, Sung Moon; Suh, Yong Suk; Park, Cheol Park

    2016-01-01

    In reactor design, operator training, safety analysis, or research using a reactor, it is essential to simulate time dependent reactor behaviors such as neutron population, fluid flow, and heat transfer. Furthermore, in order to use the simulator to train and educate operators, a mockup of the reactor user interface is required. There are commercial software tools available for reactor simulator development. However, it is costly to use those commercial software tools. Especially for research reactors, it is difficult to justify the high cost as regulations on research reactor simulators are not as strict as those for commercial Nuclear Power Plants(NPPs). An open source-based simulator for a research reactor is configured as a distributed control system based on EPICS framework. To demonstrate the use of the simulation framework proposed in this work, we consider a toy example. This example approximates a 1-second impulse reactivity insertion in a reactor, which represents the instantaneous removal and reinsertion of a control rod. The change in reactivity results in a slightly delayed change in power and corresponding increases in temperatures throughout the system. We proposed an approach for developing research reactor simulator using open source software tools, and showed preliminary results. The results demonstrate that the approach presented in this work can provide economical and viable way of developing research reactor simulators

  16. Research and production of knowledge in Social Work

    Directory of Open Access Journals (Sweden)

    Aldaíza Sposati

    2007-05-01

    Full Text Available This article concerns research paths in the field of Social Work. It begins with the polemic concerning the potential and ability of Social Work as a social practice to produce knowledge. It revives the debate concerning the "war of the sciences" between physicists and mathematicians with social analysts, in which the later do not recognize the scientific dimension of research in the social realm. It analyzes the growth of scientific production in Social Work through dissertations and theses in the Graduate Social Work Program. To do so it comments on the analyses of Iamamoto, Silva and Silva and Carvalho and indicates the need to establish a research policy, orient the epistemic community in Social Work and organize a network of researchers centers.

  17. Work Engagement – A Systematic Review of Polish Research

    Directory of Open Access Journals (Sweden)

    Pollak Anita

    2017-06-01

    Full Text Available Over the past decade work engagement has gained both business and academia attention. With growing number of studies and meta-analyses the concept of work engagement is one of the pillars of positive work and organizational psychology. This systematic review presents the current state of research on work engagement in Poland. Results confirmed that work-engagement studies have not yet reached the threshold to conduct meta-analysis. The review of measurement methods and synthesis of findings allows to identify strengths and gaps in Polish studies. Discussion of limitations and biases in current research is accompanied with urge to overcome them and develop thriving stream of research on work engagement.

  18. SIMULATED ANIMAL EXPERIMENTS IN TEACHING AND RESEARCH

    Directory of Open Access Journals (Sweden)

    Chirag B. Mistry, Shreya M. Shah, Jagatkumar D. Bhatt

    2015-07-01

    Full Text Available Animal experiments are of paramount importance in the pre-clinical screening of new chemical entity. On the other hand, various regulatory guidelines for animal experiments are becoming more stringent in the face of worldwide protests by animal rights activists. Moreover, simulated animal experiments’ softwares are being developed and they can be implemented in the postgraduate and graduate students’ curriculum for demonstration of standard physiological and pharmacological principles compared to real time animal experiments. In fact, implementation of virtual experiment will decrease hand on experience of animal experiments among medical students, but after medical graduation, animal experiment is lest utilized during their day to day clinical practice. Similarly, in case of postgraduate pharmacology curriculum, computer based virtual animal experiments can facilitate teaching and learning in a short span of time with various protocols, without sacrificing any animal for already established experimental outcomes.

  19. Turning research on the psychosocial working environment into regulatory practice

    DEFF Research Database (Denmark)

    Hansen, Agnete Meldgaard; Nielsen, Klaus Tranetoft; Starheim, Liv

    The psychosocial working environment is an expanding field of research. Within the last decades a lot of knowledge has been developed in the field. The question however remains how this knowledge can be, and is being, utilized in the regulation of the psychosocial working environment. This question...... we understand this process as a translation of knowledge into policies, tools and actors dealing with the psychosocial working environment. Drawing on this understanding we develop a model that illustrates the utility of different types of research on the psychosocial working environment...

  20. Agent-based simulation in entrepreneurship research

    NARCIS (Netherlands)

    Yang, S.-J.S.; Chandra, Y.

    2009-01-01

    Agent-based modeling (ABM) has wide applications in natural and social sciences yet it has not been widely applied in entrepreneurship research. We discuss the nature of ABM, its position among conventional methodologies and then offer a roadmap for developing, testing and extending theories of

  1. 77 FR 25150 - GPS Satellite Simulator Working Group; Notice of Meeting

    Science.gov (United States)

    2012-04-27

    ... DEPARTMENT OF DEFENSE Department of the Air Force GPS Satellite Simulator Working Group; Notice of Meeting AGENCY: The United States Air Force, DoD. ACTION: Amending GPS Simulator Working group Meeting Notice. SUMMARY: We are requesting to amend the date of the GPS Simulator Working group meeting notice...

  2. The status of research ethics in social work.

    Science.gov (United States)

    Ferguson, Aidan; Clark, James J

    2018-01-01

    Research ethics provide important and necessary standards related to the conduct and dissemination of research. To better understand the current state of research ethics discourse in social work, a systematic literature search was undertaken and numbers of publications per year were compared between STEM, social science, and social work disciplines. While many professions have embraced the need for discipline-specific research ethics subfield development, social work has remained absent. Low publication numbers, compared to other disciplines, were noted for the years (2006-2016) included in the study. Social work published 16 (1%) of the 1409 articles included in the study, contributing 3 (>1%) for each of the disciplines highest producing years (2011 and 2013). Comparatively, psychology produced 75 (5%) articles, psychiatry produced 64 (5%) articles, and nursing added 50 (4%) articles. The STEM disciplines contributed 956 (68%) articles between 2006 and 2016, while social science produced 453 (32%) articles. Examination of the results is provided in an extended discussion of several misconceptions about research ethics that may be found in the social work profession. Implications and future directions are provided, focusing on the need for increased engagement, education, research, and support for a new subfield of social work research ethics.

  3. A Report on the Research and Development of Instructional Simulation.

    Science.gov (United States)

    West, Charles K.; And Others

    The purpose of this report is to communicate findings on current knowledge of simulation design, development, and evaluation. Research on this project was guided by questions posed by the Defense Systems Management College in Fort Belvoir, Virginia. These questions fall into three categories: the constituents of good instructional simulations, the…

  4. Games and Simulations in Online Learning: Research and Development Frameworks

    Science.gov (United States)

    Gibson, David; Aldrich, Clark; Prensky, Marc

    2007-01-01

    Games and Simulations in Online Learning: Research and Development Frameworks examines the potential of games and simulations in online learning, and how the future could look as developers learn to use the emerging capabilities of the Semantic Web. It presents a general understanding of how the Semantic Web will impact education and how games and…

  5. Modularity, Working Memory, and Second Language Acquisition: A Research Program

    Science.gov (United States)

    Truscott, John

    2017-01-01

    Considerable reason exists to view the mind, and language within it, as modular, and this view has an important place in research and theory in second language acquisition (SLA) and beyond. But it has had very little impact on the study of working memory and its role in SLA. This article considers the need for modular study of working memory,…

  6. Nurturing "Critical Hope" in Teaching Feminist Social Work Research

    Science.gov (United States)

    Anderson-Nathe, Ben; Gringeri, Christina; Wahab, Stephanie

    2013-01-01

    Despite the congruence between critical feminist values and the cardinal values of the social work profession, feminist research in social work has lagged behind its feminist cousins in the social sciences, particularly in terms of critical uses of theory, reflexivity, and the troubling of binaries. This article presents as praxis our reflections…

  7. Educating for Good Work: From Research to Practice

    Science.gov (United States)

    Mucinskas, Daniel; Gardner, Howard

    2013-01-01

    Launched in 1995, the GoodWork Project is a long-term, multi-site effort to understand the nature of good work across the professional landscape and to promote its achievement by relevant groups of students and professionals. In this essay, the authors review the goals and methods of the initial research project and its most salient findings. They…

  8. Empowering Youth Work Supervisors with Action Research Strategies

    Science.gov (United States)

    Herman, Margo

    2012-01-01

    Supervising youth workers is a challenging, demanding job in a complex field. Too frequently youth workers get mired in reacting to the everyday crises that dominate their work, finding it difficult to rise above the daily demands to reach a place where reflection can help guide their work. Strategies based in action research can empower youth…

  9. Joining the conversation: newspaper journalists' views on working with researchers.

    Science.gov (United States)

    Waddell, Charlotte; Lomas, Jonathan; Lavis, John N; Abelson, Julia; Shepherd, Cody A; Bird-Gayson, Twylla

    2005-09-01

    For health researchers who seek more research use in policy making to improve health and healthcare, working with the news media may represent an opportunity, given the media's pivotal role in public policy agenda-setting. Much literature on science and health journalism assumes a normative stance, focusing on improving the accuracy of news coverage. In this study, we investigated journalists' perspectives and experiences. We were particularly interested in learning how health researchers could work constructively with journalists as a means to increase research use in policy making. Qualitative methods were used to conduct and analyze interviews with experienced newspaper journalists across Canada, with children's mental health as a content example. In response, study participants emphasized journalistic processes more than the content of news coverage, whether children's mental health or other topics. Instead, they focused on what they thought researchers needed to know about journalists' roles, practices and views on working with researchers. Newspaper journalists balance business and social responsibilities according to their respective roles as editors, columnists and reporters. In practice, journalists must ensure newsworthiness, relevance to readers and access to sources in a context of daily deadlines. As generalists, journalists rely on researchers to be expert interpreters, although they find many researchers unavailable or unable to communicate with public audiences. While journalists are skeptical about such common organizational communications tools as news releases, they welcome the uncommon contributions of those researchers who cultivate relationships and invest time to synthesize and communicate research evidence on an ongoing basis. Some appealed for more researchers to join them in participating in public conversations. We conclude that there are opportunities for policy-oriented health researchers to work constructively with newspaper

  10. Numerical simulation research on gas migration with Y type ventilation

    Science.gov (United States)

    Gou, Yanan; Han, Xuezheng

    2018-01-01

    The ventilation way of the working face has a great influence to goaf flow field and gas migration, the existing U-shaped ventilation face wind serious overrun, Y type ventilation mode is put forward, and the mathematic control equation of the gas moving rule is established. Put the Gaozhuang coal mine west five mining area as the model, set up calculation model. And the gas concentration is simulated, the simulation results show that the Y type ventilation ways can intercept goaf gas into the corner on the working plane and return air lane, effectively avoid the work of top corner gas accumulation.

  11. Review of research on simulation engineering in FY2007

    International Nuclear Information System (INIS)

    2009-02-01

    Research on simulation engineering for nuclear applications, based on the plan for meeting the mid-term goal of the Japan Atomic Energy Agency', has been performed at Center for Computational Science and e-Systems, Japan Atomic Energy Agency (CCSE/JAEA). CCSE established the committee consisting outside experts and authorities which does research evaluation and advices for the assistance of the research and development. This report summarizes the result of the evaluation by the committee on the research on simulation engineering performed at CCSE/JAEA in FY2007. (author)

  12. Review of research on simulation engineering in FY2008

    International Nuclear Information System (INIS)

    2010-02-01

    Research on simulation engineering for nuclear applications, based on 'the plan for meeting the mid-term goal of the Japan Atomic Energy Agency', has been performed at Center for Computational Science and e-Systems, Japan Atomic Energy Agency (CCSE/JAEA). CCSE established the committee consisting outside experts and authorities which does research evaluation and advices for the assistance of the research and development. This report summarizes the result of the evaluation by the committee on the research on simulation engineering performed at CCSE/JAEA in FY2008. (author)

  13. Work in process level definition: a method based on computer simulation and electre tri

    Directory of Open Access Journals (Sweden)

    Isaac Pergher

    2014-09-01

    Full Text Available This paper proposes a method for defining the levels of work in progress (WIP in productive environments managed by constant work in process (CONWIP policies. The proposed method combines the approaches of Computer Simulation and Electre TRI to support estimation of the adequate level of WIP and is presented in eighteen steps. The paper also presents an application example, performed on a metalworking company. The research method is based on Computer Simulation, supported by quantitative data analysis. The main contribution of the paper is its provision of a structured way to define inventories according to demand. With this method, the authors hope to contribute to the establishment of better capacity plans in production environments.

  14. Values in a Science of Social Work: Values-Informed Research and Research-Informed Values

    Science.gov (United States)

    Longhofer, Jeffrey; Floersch, Jerry

    2014-01-01

    While social work must be evaluative in relation to its diverse areas of practice and research (i.e., values-informed research), the purpose of this article is to propose that values are within the scope of research and therefore research on practice should make values a legitimate object of investigation (i.e., research-informed values). In this…

  15. Report of the working group on detector simulation

    International Nuclear Information System (INIS)

    Price, L.E.; Lebrun, P.

    1986-01-01

    An ad hoc group at Snowmass reviewed the need for detector simulation to support detectors at the SSC. This report first reviews currently available programs for detector simulation, both those written for single specific detectors and those aimed at general utility. It then considers the requirements for detector simulation for the SSC, with particular attention to enhancements that are needed relative to present programs. Finally, a list of recommendations is given

  16. Review of research on simulation engineering in FY2009

    International Nuclear Information System (INIS)

    2011-03-01

    Research on simulation engineering for nuclear applications, based on 'the plan for meeting the mid-term goal of the Japan Atomic Energy Agency', has been performed at Center for Computational Science and e-Systems, Japan Atomic Energy Agency (CCSE/JAEA). CCSE established the committee consisting outside experts and authorities which does research evaluation and advices for the assistance of the research and development. This report summarizes results of the evaluation by the committee on the followings. (1) Research and development on simulation engineering performed at CCSE/JAEA in FY2009. (2) Research and development on simulation engineering performed at CCSE/JAEA in the period of the midterm plan (October 1st, 2005 - March 31st, 2010). (author)

  17. Coordinating distributed work : Exploring situated coordination with gaming-simulation

    NARCIS (Netherlands)

    van Laere, J.

    2003-01-01

    Organizational work has become more and more distributed nowadays. Information and communication technologies (ICT) provide opportunities to improve coordination of distributed work, but in practice many organizations struggle with integrating new organizational structures, new work practices and

  18. Representations of work engagement and workaholism in modern psychological research

    Directory of Open Access Journals (Sweden)

    Valentina V. Barabanshchikova

    2015-03-01

    Full Text Available The paper provides an overview of work engagement and workaholism, and also the current research. Work engagement differs from workaholism as a psychological phenomenon, but both concepts are closely connected with each other. The scientific research of the phenomena mentioned above began only in 1970, when Oates published his first book called “On being a “workaholic”. Each employee has to find balance between private life and work to get utmost job satisfaction, and to perform his/her job responsibilities productively. Work engaged staff have higher levels of subjective comfort and psychological well-being, without any experience of occupational deteriorations. In modern psychology, there is no prescription for perfect recipe of finding balance between work and family that entails different angles of considering work engagement and workaholism, their causes and prevention mechanisms. On the other hand, the impact of excessive work engagement may be one of the reasons of developing negative human functional states that plays a moderating role in the transit stage from work engagement to workaholism. Schaufeli discribed work engagement as a positive, affective-motivational state of fulfillment that can be characterized by vigor, dedication, and absorption. Workaholism is a multidimensional construct, which can be linked to both positive and negative outcomes. At the contemporary stage of scientific development a lot of difficulties in studying workaholism and work engagement could be analyzed, e.g. there are no adopted Russian diagnostics instruments to assess workaholism and its manifastations. Thus, further research should be devoted to the issues of choosing proper research instruments in order to obtain clear and reliable results.

  19. Simulation Use in Paramedic Education Research (SUPER): A Descriptive Study.

    Science.gov (United States)

    McKenna, Kim D; Carhart, Elliot; Bercher, Daniel; Spain, Andrew; Todaro, John; Freel, Joann

    2015-01-01

    The purpose of this research was to characterize the use of simulation in initial paramedic education programs in order assist stakeholders' efforts to target educational initiatives and resources. This group sought to provide a snapshot of what simulation resources programs have or have access to and how they are used; faculty perceptions about simulation; whether program characteristics, resources, or faculty training influence simulation use; and if simulation resources are uniform for patients of all ages. This was a cross-sectional census survey of paramedic programs that were accredited or had a Letter of Review from the Committee on Accreditation of Educational Programs for the EMS Professions at the time of the study. The data were analyzed using descriptive statistics and chi-square analyses. Of the 638 surveys sent, 389 valid responses (61%) were analyzed. Paramedic programs reported they have or have access to a wide range of simulation resources (task trainers [100%], simple manikins [100%], intermediate manikins [99%], advanced/fully programmable manikins [91%], live simulated patients [83%], computer-based [71%], and virtual reality [19%]); however, they do not consistently use them, particularly advanced (71%), live simulated patients (66%), computer-based (games, scenarios) (31%), and virtual reality (4%). Simulation equipment (of any type) reportedly sits idle and unused in (31%) of programs. Lack of training was cited as the most common reason. Personnel support specific to simulation was available in 44% of programs. Programs reported using simulation to replace skills more frequently than to replace field or clinical hours. Simulation goals included assessment, critical thinking, and problem-solving most frequently, and patient and crew safety least often. Programs using advanced manikins report manufacturers as their primary means of training (87%) and that 19% of faculty had no training specific to those manikins. Many (78%) respondents felt

  20. Quantifying Globalization in Social Work Research: A 10-Year Review of American Social Work Journals

    Science.gov (United States)

    Agbényiga, DeBrenna L.; Huang, Lihua

    2014-01-01

    Measured by the prevalence of journal article contributions, geographic coverage, and international collaboration, this literature review found an increasing level of globalization with respect to American social work research and contribution to the social work profession from 2000-2009. Findings suggest changes are needed in global awareness and…

  1. Work Hardening Behavior of 1020 Steel During Cold-Beating Simulation

    Science.gov (United States)

    CUI, Fengkui; LING, Yuanfei; XUE, Jinxue; LIU, Jia; LIU, Yuhui; LI, Yan

    2017-03-01

    The present research of cold-beating formation mainly focused on roller design and manufacture, kinematics, constitutive relation, metal flow law, thermo-mechanical coupling, surface micro-topography and microstructure evolution. However, the research on surface quality and performance of workpieces in the process of cold-beating is rare. Cold-beating simulation experiment of 1020 steel is conducted at room temperature and strain rates ranging from 2000 to 4000 s-1 base on the law of plastic forming. According to the experimental data, the model of strain hardening of 1020 steel is established, Scanning Electron Microscopy(SEM) is conducted, the mechanism of the work hardening of 1020 steel is clarified by analyzing microstructure variation of 1020 steel. It is found that the strain rate hardening effect of 1020 steel is stronger than the softening effect induced by increasing temperatures, the process of simulation cold-beating cause the grain shape of 1020 steel significant change and microstructure elongate significantly to form a fibrous tissue parallel to the direction of deformation, the higher strain rate, the more obvious grain refinement and the more hardening effect. Additionally, the change law of the work hardening rate is investigated, the relationship between dislocation density and strain, the relationship between work hardening rate and dislocation density is obtained. Results show that the change trend of the work hardening rate of 1020 steel is divided into two stages, the work hardening rate decreases dramatically in the first stage and slowly decreases in the second stage, finally tending toward zero. Dislocation density increases with increasing strain and strain rate, work hardening rate decreases with increasing dislocation density. The research results provide the basis for solving the problem of improving the surface quality and performance of workpieces under cold-beating formation of 1020 steel.

  2. 77 FR 23668 - GPS Satellite Simulator Working Group Notice of Meeting

    Science.gov (United States)

    2012-04-20

    ... DEPARTMENT OF DEFENSE Department of the Air Force GPS Satellite Simulator Working Group Notice of... inform the public that the Global Positioning Systems (GPS) Directorate will be hosting an open GPS Satellite Simulator Working Group (SSWG) meeting for manufacturers of GPS constellation simulators utilized...

  3. Social working memory: Neurocognitive networks and directions for future research

    Directory of Open Access Journals (Sweden)

    Meghan L Meyer

    2012-12-01

    Full Text Available Navigating the social world requires the ability to maintain and manipulate information about people’s beliefs, traits, and mental states. We characterize this capacity as social working memory. To date, very little research has explored this phenomenon, in part because of the assumption that general working memory systems would support working memory for social information. Various lines of research, however, suggest that social cognitive processing relies on a neurocognitive network (i.e., the ‘mentalizing network’ that is functionally distinct from, and considered antagonistic with, the canonical working memory network. Here, we review evidence suggesting that demanding social cognition requires social working memory and that both the mentalizing and canonical working memory neurocognitive networks support social working memory. The neural data run counter to the common finding of parametric decreases in mentalizing regions as a function of working memory demand and suggest that the mentalizing network can support demanding cognition, when it is demanding social cognition. Implications for individual differences in social cognition and pathologies of social cognition are discussed.

  4. Summary of the working group on modelling and simulation

    International Nuclear Information System (INIS)

    Schachinger, L.

    1991-11-01

    The discussions and presentations in the Simulations and Modelling subgroup of the Fifth ICFA Beam Dynamics Workshop ''The Effects of Errors in Accelerators'' are summarized. The workshop was held on October 3--8, 1991 in Corpus Christi, Texas

  5. Development of JSTAMP-Works/NV and HYSTAMP for Multipurpose Multistage Sheet Metal Forming Simulation

    International Nuclear Information System (INIS)

    Umezu, Yasuyoshi; Watanabe, Yuko; Ma, Ninshu

    2005-01-01

    Since 1996, Japan Research Institute Limited (JRI) has been providing a sheet metal forming simulation system called JSTAMP-Works packaged the FEM solvers of LS-DYNA and JOH/NIKE, which might be the first multistage system at that time and has been enjoying good reputation among users in Japan. To match the recent needs, 'faster, more accurate and easier', of process designers and CAE engineers, a new metal forming simulation system JSTAMP-Works/NV is developed. The JSTAMP-Works/NV packaged the automatic healing function of CAD and had much more new capabilities such as prediction of 3D trimming lines for flanging or hemming, remote control of solver execution for multi-stage forming processes and shape evaluation between FEM and CAD.On the other way, a multi-stage multi-purpose inverse FEM solver HYSTAMP is developed and will be soon put into market, which is approved to be very fast, quite accurate and robust.Lastly, authors will give some application examples of user defined ductile damage subroutine in LS-DYNA for the estimation of material failure and springback in metal forming simulation

  6. Development of JSTAMP-Works/NV and HYSTAMP for Multipurpose Multistage Sheet Metal Forming Simulation

    Science.gov (United States)

    Umezu, Yasuyoshi; Watanabe, Yuko; Ma, Ninshu

    2005-08-01

    Since 1996, Japan Research Institute Limited (JRI) has been providing a sheet metal forming simulation system called JSTAMP-Works packaged the FEM solvers of LS-DYNA and JOH/NIKE, which might be the first multistage system at that time and has been enjoying good reputation among users in Japan. To match the recent needs, "faster, more accurate and easier", of process designers and CAE engineers, a new metal forming simulation system JSTAMP-Works/NV is developed. The JSTAMP-Works/NV packaged the automatic healing function of CAD and had much more new capabilities such as prediction of 3D trimming lines for flanging or hemming, remote control of solver execution for multi-stage forming processes and shape evaluation between FEM and CAD. On the other way, a multi-stage multi-purpose inverse FEM solver HYSTAMP is developed and will be soon put into market, which is approved to be very fast, quite accurate and robust. Lastly, authors will give some application examples of user defined ductile damage subroutine in LS-DYNA for the estimation of material failure and springback in metal forming simulation.

  7. Gaming, simulations and society research scope and perspective

    CERN Document Server

    Shiratori, R; Kato, F

    2014-01-01

    This book presents a current research scope and perspective of Simulation and Gaming.Theoretical problems of Simulation and Gaming will be examined with a view to improving the social sciences through the introduction of the techniques and concepts of Simulation and Gaming.The fields of economics, political science, psychology and business management can all be radically improved by introducing such techniques of Simulation and Gaming as the Agent-Based Modelling.Other important topics are the analysis of philosophical foundations in Simulation and Gaming as an academic discipline.The ever growing and massive popularity of PC and arcade games cannot be ignored.Their potential as agents of education and their essentially violent nature raise many ethical and moral problems that need to be addressed.

  8. Simulation of Industrial Wastewater Treatment from the Suspended Impurities into the Flooded Waste Mining Workings

    Science.gov (United States)

    Bondareva, L.; Zakharov, Yu; Goudov, A.

    2017-04-01

    The paper is dedicated to the mathematical model of slurry wastewater treatment and disposal in a flooded mine working. The goal of the research is to develop and analyze the mathematical model of suspended impurities flow and distribution. Impurity sedimentation model is under consideration. Due to the sediment compaction problem solution domain can be modified. The model allows making a forecast whether volley emission is possible. Numerical simulation results for “Kolchuginskaya” coal mine presented. Impurity concentration diagrams in outflow corresponding to the real full-scale data obtained. Safely operation time mine workings like a wastewater treatment facility are estimated. The carried out calculations demonstrate that the method of industrial wastewater treatment in flooded waste mine workings can be put into practice but it is very important to observe all the processes going on to avoid volley emission of accumulated impurities.

  9. Research Productivity in Top-Ranked Schools in Psychology and Social Work: Research Cultures Do Matter!

    Science.gov (United States)

    Holosko, Michael J.; Barner, John R.

    2016-01-01

    Objectives: We sought the answer to one major research question--Does psychology have a more defined culture of research than social work? Methods: Using "U.S. News and World Report" 2012 and 2013 rankings, we compared psychology faculty (N = 969) from their 25 top ranked programs with a controlled sample of social work faculty (N = 970)…

  10. Writing a Mixed Methods Report in Social Work Research

    Science.gov (United States)

    Bronstein, Laura R.; Kovacs, Pamela J.

    2013-01-01

    This article briefly chronicles the development of mixed methods research and its use in social work. We then move onto a discussion of terms and designs, reasons for (and for not) using mixed methods. Drawing upon exemplars, we address how to write up a mixed methods study when (1) the sample is single; single for one part, with a subset for the…

  11. Critical Thinking in Social Work Education: A Research Synthesis

    Science.gov (United States)

    Samson, Patricia L.

    2016-01-01

    In a meta-analytic review of critical thinking in social work education, findings revealed variability in research designs, methods, and subsequent findings. The 10 studies reviewed assessed different components of critical thinking and highlighted different potential moderator variables. Although there are significant limitations to all the…

  12. Adverse reproduction outcomes among employees working in biomedical research laboratories

    DEFF Research Database (Denmark)

    Wennborg, H.; Bonde, Jens Peter; Stenbeck, M.

    2002-01-01

    Objectives The aim of the study was to investigate reproductive outcomes such as birthweight, preterm births, and postterm births among women working in research laboratories while pregnant. Methods Female university personnel were identified from a source cohort of Swedish laboratory employees...

  13. Faculty at Work: Focus on Research, Scholarship, and Service.

    Science.gov (United States)

    Blackburn, Robert T.; And Others

    1991-01-01

    A study compared selected personal and environmental motivational variables in college faculty with allocation of work effort to research, scholarship, and service. Faculty were from eight liberal arts and sciences departments in a range of institution types. For all institutional types, self-valuation motivators significantly accounted for the…

  14. The future of work | IDRC - International Development Research ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2017-06-12

    Jun 12, 2017 ... English · Français ... The digitization of work is enabling job seekers to enter new labour markets, often in ... Through five in-depth case studies led by Southern researchers, new ... a class room of students using computers.

  15. MCNPX simulations of the research gamma irradiator at CTEx

    International Nuclear Information System (INIS)

    Rusin, Tiago; Rebello, Wilson F.; Vellozo, Sergio O.; Gomes, Renato G.; Silva, Ademir X.

    2011-01-01

    An accurate knowledge of the dose rate distribution inside an irradiating facility is needed in order to ensure safety and guarantee efficient treatment of materials by exposure to ionizing radiation, since insufficient doses may not produce the desired effects whereas exceeding ones can compromise the properties of the irradiated items. Described in this work, are Monte Carlo simulations of the cavity-type research irradiating facility at Centro Tecnologico do Exercito performed by using the MCNPX radiation transport code. The calculations were intended to provide a better understanding of the measured dose rate distributions produced by a 42-kCi cesium- 137 source, also modeling unmapped regions of interest, either inside or outside the irradiation chambers, such as in experimental channels, or next to the moveable door and across unmapped regions of the chambers, in order to investigate scattering and attenuation of the fluxes and softening of the gamma spectrum and to predict dose rates in case of an accidental opening of the shielded door with the source out of its shielded cask. Results from calculations have been compared to measurements performed with chemical dosimeters. Comparative analyses have consistently shown a very good agreement between calculated and measured relative dose rate distributions and provided an improved knowledge on the gamma ray environment produced by the irradiator. (author)

  16. MCNPX simulations of the research gamma irradiator at CTEx

    Energy Technology Data Exchange (ETDEWEB)

    Rusin, Tiago; Rebello, Wilson F.; Vellozo, Sergio O.; Gomes, Renato G., E-mail: tiagorusin@ime.eb.b, E-mail: rebello@ime.eb.b, E-mail: vellozo@cbpf.b, E-mail: renatoguedes@ime.eb.b [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil). Dept. de Engenharia Nuclear; Vital, Helio C., E-mail: vital@ctex.eb.b [Centro Tecnologico do Exercito (CTEx), Rio de Janeiro, RJ (Brazil); Silva, Ademir X., E-mail: ademir@con.ufrj.b [Universidade Federal do Rio de Janeiro (PEN/COPPE/UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia. Programa de Engenharia Nuclear

    2011-07-01

    An accurate knowledge of the dose rate distribution inside an irradiating facility is needed in order to ensure safety and guarantee efficient treatment of materials by exposure to ionizing radiation, since insufficient doses may not produce the desired effects whereas exceeding ones can compromise the properties of the irradiated items. Described in this work, are Monte Carlo simulations of the cavity-type research irradiating facility at Centro Tecnologico do Exercito performed by using the MCNPX radiation transport code. The calculations were intended to provide a better understanding of the measured dose rate distributions produced by a 42-kCi cesium- 137 source, also modeling unmapped regions of interest, either inside or outside the irradiation chambers, such as in experimental channels, or next to the moveable door and across unmapped regions of the chambers, in order to investigate scattering and attenuation of the fluxes and softening of the gamma spectrum and to predict dose rates in case of an accidental opening of the shielded door with the source out of its shielded cask. Results from calculations have been compared to measurements performed with chemical dosimeters. Comparative analyses have consistently shown a very good agreement between calculated and measured relative dose rate distributions and provided an improved knowledge on the gamma ray environment produced by the irradiator. (author)

  17. Social work and research in advanced welfare states

    DEFF Research Database (Denmark)

    and North-Western Europe more generally, there are other countries where the public spend on welfare is relatively high. The contributors to this book explore and exemplify ways in which social work and research are distinctive for advanced welfare states. This involves exploring their connection......The aim of this book is to exemplify the ways in which social work and research develop in ‘advanced’ welfare states - countries where public spending is relatively high as a proportion of GNP. While such countries have traditionally been associated with Scandinavian countries in particular...... to professional identities, histories and welfare systems, their associations with academic, theoretical and cultural traditions of collaboration between academic and social work practice, and the distinctive links with community, national policy, governmentality and agency, with respect to forms of knowledge...

  18. On shift simulation in aeromedical operations - making it work

    Directory of Open Access Journals (Sweden)

    John Glasheen

    2017-06-01

    Full Text Available Patient care in the prehospital and retrieval medicine (PHARM environment presents many technical and non-technical challenges. Clinicians are frequently required to perform complex interventions in a time critical and resource limited setting. Intensive training is required prior to operational deployment, and ongoing training is vital to ensure optimal team performance in the delivery of high quality patient care. Regular simulation training with high situational fidelity is valuable in developing and maintaining excellence in PHARM. We describe the methods employed by two Australian aeromedical retrieval services to facilitate daily on shift simulation.

  19. Social working memory: neurocognitive networks and directions for future research.

    Science.gov (United States)

    Meyer, Meghan L; Lieberman, Matthew D

    2012-01-01

    Navigating the social world requires the ability to maintain and manipulate information about people's beliefs, traits, and mental states. We characterize this capacity as social working memory (SWM). To date, very little research has explored this phenomenon, in part because of the assumption that general working memory systems would support working memory for social information. Various lines of research, however, suggest that social cognitive processing relies on a neurocognitive network (i.e., the "mentalizing network") that is functionally distinct from, and considered antagonistic with, the canonical working memory network. Here, we review evidence suggesting that demanding social cognition requires SWM and that both the mentalizing and canonical working memory neurocognitive networks support SWM. The neural data run counter to the common finding of parametric decreases in mentalizing regions as a function of working memory demand and suggest that the mentalizing network can support demanding cognition, when it is demanding social cognition. Implications for individual differences in social cognition and pathologies of social cognition are discussed.

  20. Using Framework Analysis in nursing research: a worked example.

    Science.gov (United States)

    Ward, Deborah J; Furber, Christine; Tierney, Stephanie; Swallow, Veronica

    2013-11-01

    To demonstrate Framework Analysis using a worked example and to illustrate how criticisms of qualitative data analysis including issues of clarity and transparency can be addressed. Critics of the analysis of qualitative data sometimes cite lack of clarity and transparency about analytical procedures; this can deter nurse researchers from undertaking qualitative studies. Framework Analysis is flexible, systematic, and rigorous, offering clarity, transparency, an audit trail, an option for theme-based and case-based analysis and for readily retrievable data. This paper offers further explanation of the process undertaken which is illustrated with a worked example. Data were collected from 31 nursing students in 2009 using semi-structured interviews. The data collected are not reported directly here but used as a worked example for the five steps of Framework Analysis. Suggestions are provided to guide researchers through essential steps in undertaking Framework Analysis. The benefits and limitations of Framework Analysis are discussed. Nurses increasingly use qualitative research methods and need to use an analysis approach that offers transparency and rigour which Framework Analysis can provide. Nurse researchers may find the detailed critique of Framework Analysis presented in this paper a useful resource when designing and conducting qualitative studies. Qualitative data analysis presents challenges in relation to the volume and complexity of data obtained and the need to present an 'audit trail' for those using the research findings. Framework Analysis is an appropriate, rigorous and systematic method for undertaking qualitative analysis. © 2013 Blackwell Publishing Ltd.

  1. Improving industrial designers work process by involving user research

    DEFF Research Database (Denmark)

    Dai, Zheng; Ómarsson, Ólafur

    2011-01-01

    With changing times, new technologies and more opinionated consumers, the modern industrial designer has found himself in need of fresher and more up to date approaches in his daily work. In a fast moving industry, the designer needs to keep a thinking process of dynamic and subjective attitude...... will give the grounding for believing that the industrial designer needs to adopt user research methods to a level where he can still continue to work under the very nature of industrial design that has made it a successful practice for the last century. The combing of the approaches and attitude will help....... User research is part of user centered design (UCD). UCD has a reputation for subjective and reflective practice. In this paper there are two example cases. One is conducted by a classical industrial design process, and another is costing half of energy and time in user research. These examples...

  2. ASPIRE: Teachers and researchers working together to enhance student learning

    Science.gov (United States)

    Yager, P. L.; Garay, D. L.; Warburton, J.

    2016-02-01

    Given the impact of human activities on the ocean, involving teachers, students, and their families in scientific inquiry has never been more important. Science, Technology, Engineering, and Math (STEM) disciplines have become key focus areas in the education community of the United States. Newly adopted across the nation, Next Generation Science Standards require that educators embrace innovative approaches to teaching. Transforming classrooms to actively engage students through a combination of knowledge and practice develops conceptual understanding and application skills. The partnerships between researchers and educators during the Amundsen Sea Polynya International Research Expedition (ASPIRE) offer an example of how academic research can enhance K-12 student learning. In this presentation, we illustrate how ASPIRE teacher-scientist partnerships helped engage students with actual and virtual authentic scientific investigations. Scientists benefit from teacher/researcher collaborations as well, as funding for scientific research also depends on effective communication between scientists and the public. While contributing to broader impacts needed to justify federal funding, scientists also benefit by having their research explained in ways that the broader public can understand: collaborations with teachers produce classroom lessons and published work that generate interest in the scientists' research specifically and in marine science in general. Researchers can also learn from their education partners about more effective teaching strategies that can be transferred to the college level. Researchers who work with teachers in turn gain perspectives on the constraints that teachers and students face in the pre-college classroom. Crosscutting concepts of research in polar marine science can serve as intellectual tools to connect important ideas about ocean and climate science for the public good.

  3. Real-time 3D radiation risk assessment supporting simulation of work in nuclear environments

    International Nuclear Information System (INIS)

    Szoke, I; Louka, M N; Bryntesen, T R; Bratteli, J; Edvardsen, S T; RøEitrheim, K K; Bodor, K

    2014-01-01

    This paper describes the latest developments at the Institute for Energy Technology (IFE) in Norway, in the field of real-time 3D (three-dimensional) radiation risk assessment for the support of work simulation in nuclear environments. 3D computer simulation can greatly facilitate efficient work planning, briefing, and training of workers. It can also support communication within and between work teams, and with advisors, regulators, the media and public, at all the stages of a nuclear installation’s lifecycle. Furthermore, it is also a beneficial tool for reviewing current work practices in order to identify possible gaps in procedures, as well as to support the updating of international recommendations, dissemination of experience, and education of the current and future generation of workers. IFE has been involved in research and development into the application of 3D computer simulation and virtual reality (VR) technology to support work in radiological environments in the nuclear sector since the mid 1990s. During this process, two significant software tools have been developed, the VRdose system and the Halden Planner, and a number of publications have been produced to contribute to improving the safety culture in the nuclear industry. This paper describes the radiation risk assessment techniques applied in earlier versions of the VRdose system and the Halden Planner, for visualising radiation fields and calculating dose, and presents new developments towards implementing a flexible and up-to-date dosimetric package in these 3D software tools, based on new developments in the field of radiation protection. The latest versions of these 3D tools are capable of more accurate risk estimation, permit more flexibility via a range of user choices, and are applicable to a wider range of irradiation situations than their predecessors. (paper)

  4. Real-time 3D radiation risk assessment supporting simulation of work in nuclear environments.

    Science.gov (United States)

    Szőke, I; Louka, M N; Bryntesen, T R; Bratteli, J; Edvardsen, S T; RøEitrheim, K K; Bodor, K

    2014-06-01

    This paper describes the latest developments at the Institute for Energy Technology (IFE) in Norway, in the field of real-time 3D (three-dimensional) radiation risk assessment for the support of work simulation in nuclear environments. 3D computer simulation can greatly facilitate efficient work planning, briefing, and training of workers. It can also support communication within and between work teams, and with advisors, regulators, the media and public, at all the stages of a nuclear installation's lifecycle. Furthermore, it is also a beneficial tool for reviewing current work practices in order to identify possible gaps in procedures, as well as to support the updating of international recommendations, dissemination of experience, and education of the current and future generation of workers.IFE has been involved in research and development into the application of 3D computer simulation and virtual reality (VR) technology to support work in radiological environments in the nuclear sector since the mid 1990s. During this process, two significant software tools have been developed, the VRdose system and the Halden Planner, and a number of publications have been produced to contribute to improving the safety culture in the nuclear industry.This paper describes the radiation risk assessment techniques applied in earlier versions of the VRdose system and the Halden Planner, for visualising radiation fields and calculating dose, and presents new developments towards implementing a flexible and up-to-date dosimetric package in these 3D software tools, based on new developments in the field of radiation protection. The latest versions of these 3D tools are capable of more accurate risk estimation, permit more flexibility via a range of user choices, and are applicable to a wider range of irradiation situations than their predecessors.

  5. Laboratory results gained from cold worked type 316Ti under simulated PWR primary environment

    International Nuclear Information System (INIS)

    Devrient, B.; Kilian, R.; Koenig, G.; Widera, M.; Wermelinger, T.

    2015-01-01

    Beginning in 2005, intergranular stress corrosion cracking (IGSCC) of barrel bolts made from cold worked type 316Ti (German Material No. 1.4571 K) was observed in several S/KWU type PWRs. This mechanism was so far less understood for PWR primary conditions. Therefore an extended joint research program was launched by AREVA GmbH and VGB e.V. to clarify the specific conditions which contributed to the observed findings on barrel bolts. In the frame of this research program beneath the evaluation of the operational experience also laboratory tests on the general cracking behavior of cold worked type 316Ti material, which followed the same production line as for barrel bolt manufacturing in the eighties, with different cold work levels covering up to 30 % were performed to determine whether there is a specific susceptibility of cold worked austenitic stainless steel specimens to suffer IGSCC under simulated PWR primary conditions. All these slow strain rate tests on tapered specimens and component specimens came to the results that first, much higher cold work levels than used for the existing barrel bolts are needed for IGSCC initiation. Secondly, additional high active plastic deformation is needed to generate and propagate intergranular cracking. And thirdly, all specimens finally showed ductile fracture at the applied strain rates. (authors)

  6. [Learning together for working together: interprofessionalism in simulation training for collaborative skills development].

    Science.gov (United States)

    Policard, Florence

    2014-06-01

    The use of simulation as an educational tool is becoming more widespread in healthcare. Such training gathers doctors and nurses together, which is a rare opportunity in such a sector. The present research focuses on the contribution of inter-professional training to the development of collaborative skills when managing an emergency situation in the context of anesthesia or intensive care. From direct observations of post-simulation debriefing sessions and interviews held with learners in post graduate or in-service training, either in single or multi-professional groups, this study shows that these sessions, based on experiential learning and reflective practice, help to build a shared vision of the problem and of common operative patterns, supporting better communication and the "ability to work in a team".

  7. The role of simulation in mixed-methods research: a framework & application to patient safety.

    Science.gov (United States)

    Guise, Jeanne-Marie; Hansen, Matthew; Lambert, William; O'Brien, Kerth

    2017-05-04

    Research in patient safety is an important area of health services research and is a national priority. It is challenging to investigate rare occurrences, explore potential causes, and account for the complex, dynamic context of healthcare - yet all are required in patient safety research. Simulation technologies have become widely accepted as education and clinical tools, but have yet to become a standard tool for research. We developed a framework for research that integrates accepted patient safety models with mixed-methods research approaches and describe the performance of the framework in a working example of a large National Institutes of Health (NIH)-funded R01 investigation. This worked example of a framework in action, identifies the strengths and limitations of qualitative and quantitative research approaches commonly used in health services research. Each approach builds essential layers of knowledge. We describe how the use of simulation ties these layers of knowledge together and adds new and unique dimensions of knowledge. A mixed-methods research approach that includes simulation provides a broad multi-dimensional approach to health services and patient safety research.

  8. The problem of creative activity in of social work research

    Directory of Open Access Journals (Sweden)

    Vilka L.

    2012-10-01

    Full Text Available Current Latvian research in the area of social work is not characteristic of a creative and innovative methodological approach. The methodological conservatism derived from general sociology is particularly affecting students in doctoral studies. This proposes a question: should, in the name of scientific novelty, we support research in which the PhD student aims to get rid of his personality behind the shield of authority, sometimes even general sociology textbook truths? Or should we encourage bold challenges to methodological schematism, in which the researcher takes a pose of truly creative research and avoids becoming a representative of scientific marginality lacking one’s personality? The subject of creative activity – the researcher in social work – can best express oneself in the level of philosophic wisdom, identifying only the main guidelines of his creative processes and allowing a large headspace for one’s creative quests. A scientist, also one interested in the problems of social work, can ascertain his/her uniqueness by relying on the concept that any researcher has embarked on an individual journey, circulating on different orbits around one central idea. If the distance between such central idea and the researcher’s activities is increasing, this signifies of either a creatively productive reevaluation of the researcher’s position, or the death of the research process in having lost the original idea. On the other hand, continuous approach towards the central idea either means that the researcher is consistent and determined in his creative research, or there is complete lack of scientific novelty in cases when borrowed foreign ideas are worshipped.

  9. Inner and Outer Life at Work. The Roots and Horizon of Psychoanalytically Informed Work Life Research

    DEFF Research Database (Denmark)

    Lundgaard Andersen, Linda

    2013-01-01

    identities, conflicts, organisational and societal structuration. Against this background the accounts and conceptualisations of work life involving people to people interactions offered by psychodynamic theories and methods take up a pivotal position. Psychoanalytic organisational and work life research...... of personalised competences and work investments in welfare services, the transformation from subject-object relationships to subject-subject relationships and the emergence of the "learning organisations" and reflexive leadership. All of this has been the subject of critical analyses tracing modern work life...... position and German psychoanalytic social psychology in order to situate and identify how to understand the inner and outer life at work – in a generic display of concepts, methods and epistemology....

  10. Research on sever accident emergency simulation system for CPR1000

    International Nuclear Information System (INIS)

    Yang Zhifei; Liao Yehong; Liang Manchun; Li Ke; Yang Jie; Chen Yali

    2015-01-01

    The enhanced capability to nuclear power plant (NPP) severe accident management and emergency response depends heavily on exercises. Since the exercise scene is usually monotonous and not realistic, and conduct of exercise has a high cost, the effect of enhancing the capability is limited. Thus, the development of a Sever Accident Emergency Simulation System (SAESS) is necessary. SAESS is able to connect NPP simulator, and simulates the process of severe accident management, personnel evacuation, the dispersion of radioactive plume, and emergency response of emergency organizations. The system helps to design several of exercise scenes and optimize the disposal strategy in different severe accidents. In addition, the system reduces the cost of emergency exercise by computer simulation, benefits the research of exercise, increases the efficiency of exercise and enhances the emergency decision-making capability. This paper introduces the design and application of SAESS. (author)

  11. Research on Monte Carlo simulation method of industry CT system

    International Nuclear Information System (INIS)

    Li Junli; Zeng Zhi; Qui Rui; Wu Zhen; Li Chunyan

    2010-01-01

    There are a series of radiation physical problems in the design and production of industry CT system (ICTS), including limit quality index analysis; the effect of scattering, efficiency of detectors and crosstalk to the system. Usually the Monte Carlo (MC) Method is applied to resolve these problems. Most of them are of little probability, so direct simulation is very difficult, and existing MC methods and programs can't meet the needs. To resolve these difficulties, particle flux point auto-important sampling (PFPAIS) is given on the basis of auto-important sampling. Then, on the basis of PFPAIS, a particular ICTS simulation method: MCCT is realized. Compared with existing MC methods, MCCT is proved to be able to simulate the ICTS more exactly and effectively. Furthermore, the effects of all kinds of disturbances of ICTS are simulated and analyzed by MCCT. To some extent, MCCT can guide the research of the radiation physical problems in ICTS. (author)

  12. Development of an educational nuclear research reactor simulator

    International Nuclear Information System (INIS)

    Arafa, Amany Abdel Aziz; Saleh, Hassan Ibrahim; Ashoub, Nagieb

    2014-01-01

    This paper introduces the development of a research reactor educational simulator based on LabVIEW that allows the training of operators and studying different accident scenarios and the effects of operational parameters on the reactor behavior. Using this simulator, the trainee can test the interaction between the input parameters and the reactor activities. The LabVIEW acts as an engine implements the reactor mathematical models. In addition, it is used as a tool for implementing the animated graphical user interface. This simulator provides the training requirements for both of the reactor staff and the nuclear engineering students. Therefore, it uses dynamic animation to enhance learning and interest for a trainee on real system problems and provides better visual effects, improved communications, and higher interest levels. The benefits of conducting such projects are to develop the expertise in this field and save costs of both operators training and simulation courses.

  13. Development of an educational nuclear research reactor simulator

    Energy Technology Data Exchange (ETDEWEB)

    Arafa, Amany Abdel Aziz; Saleh, Hassan Ibrahim [Atomic Energy Authority, Cairo (Egypt). Radiation Engineering Dept.; Ashoub, Nagieb [Atomic Energy Authority, Cairo (Egypt). Reactor Physics Dept.

    2014-12-15

    This paper introduces the development of a research reactor educational simulator based on LabVIEW that allows the training of operators and studying different accident scenarios and the effects of operational parameters on the reactor behavior. Using this simulator, the trainee can test the interaction between the input parameters and the reactor activities. The LabVIEW acts as an engine implements the reactor mathematical models. In addition, it is used as a tool for implementing the animated graphical user interface. This simulator provides the training requirements for both of the reactor staff and the nuclear engineering students. Therefore, it uses dynamic animation to enhance learning and interest for a trainee on real system problems and provides better visual effects, improved communications, and higher interest levels. The benefits of conducting such projects are to develop the expertise in this field and save costs of both operators training and simulation courses.

  14. Dr.LiTHO: a development and research lithography simulator

    Science.gov (United States)

    Fühner, Tim; Schnattinger, Thomas; Ardelean, Gheorghe; Erdmann, Andreas

    2007-03-01

    This paper introduces Dr.LiTHO, a research and development oriented lithography simulation environment developed at Fraunhofer IISB to flexibly integrate our simulation models into one coherent platform. We propose a light-weight approach to a lithography simulation environment: The use of a scripting (batch) language as an integration platform. Out of the great variety of different scripting languages, Python proved superior in many ways: It exhibits a good-natured learning-curve, it is efficient, available on virtually any platform, and provides sophisticated integration mechanisms for existing programs. In this paper, we will describe the steps, required to provide Python bindings for existing programs and to finally generate an integrated simulation environment. In addition, we will give a short introduction into selected software design demands associated with the development of such a framework. We will especially focus on testing and (both technical and user-oriented) documentation issues. Dr.LiTHO Python files contain not only all simulation parameter settings but also the simulation flow, providing maximum flexibility. In addition to relatively simple batch jobs, repetitive tasks can be pooled in libraries. And as Python is a full-blown programming language, users can add virtually any functionality, which is especially useful in the scope of simulation studies or optimization tasks, that often require masses of evaluations. Furthermore, we will give a short overview of the numerous existing Python packages. Several examples demonstrate the feasibility and productiveness of integrating Python packages into custom Dr.LiTHO scripts.

  15. Development of research reactor simulator and its application to dynamic test-bed

    International Nuclear Information System (INIS)

    Kwon, Kee-Choon; Baang, Dane; Park, Jae-Chang; Lee, Seung-Wook; Bae, Sung Won

    2014-01-01

    We developed a real-time simulator for 'High-flux Advanced Neutron Application ReactOr (HANARO), and the Jordan Research and Training Reactor (JRTR). The main purpose of this simulator is operator training, but we modified this simulator into a dynamic test-bed (DTB) to test the functions and dynamic control performance of reactor regulating system (RRS) in HANARO or JRTR before installation. The simulator hardware consists of a host computer, 6 operator stations, a network switch, and a large display panel. The software includes a mathematical model that implements plant dynamics in real-time, an instructor station module that manages user instructions, and a human machine interface module. The developed research reactor simulators are installed in the Korea Atomic Energy Research Institute nuclear training center for reactor operator training. To use the simulator as a dynamic test-bed, the reactor regulating system modeling software of the simulator was replaced by actual RRS cabinet, and was interfaced using a hard-wired and network-based interface. RRS cabinet generates control signals for reactor power control based on the various feedback signals from DTB, and the DTB runs plant dynamics based on the RRS control signals. Thus the Hardware-In-the-Loop Simulation between RRS and the emulated plant (DTB) has been implemented and tested in this configuration. The test result shows that the developed DTB and actual RRS cabinet works together simultaneously resulting in quite good dynamic control performances. (author)

  16. Application of visualization and simulation program to improve work zone safety and mobility.

    Science.gov (United States)

    2010-01-01

    "A previous study sponsored by the Smart Work Zone Deployment Initiative, Feasibility of Visualization and Simulation Applications to Improve Work Zone Safety and Mobility, demonstrated the feasibility of combining readily available, inexpensiv...

  17. Research on aircraft emissions. Need for future work

    Energy Technology Data Exchange (ETDEWEB)

    Schmitt, A [German Aerospace Establishment, Cologne (Germany). Transport Research Div.

    1998-12-31

    Reflecting the present status of the research on aircraft emissions and their impacts upon the atmosphere, task-fields for a work programme for the research on aircraft emissions can be derived. Most important measures are to support the efforts to define adequate reduction measures, and (with highest priority) scenario-writing for the long-term development in aircraft emissions, to be able to include into the decision making process the aspect of in-time-reaction against unwanted future. Besides that, a steady monitoring of global aircraft emissions will be necessary. (author) 5 refs.

  18. Research on aircraft emissions. Need for future work

    Energy Technology Data Exchange (ETDEWEB)

    Schmitt, A. [German Aerospace Establishment, Cologne (Germany). Transport Research Div.

    1997-12-31

    Reflecting the present status of the research on aircraft emissions and their impacts upon the atmosphere, task-fields for a work programme for the research on aircraft emissions can be derived. Most important measures are to support the efforts to define adequate reduction measures, and (with highest priority) scenario-writing for the long-term development in aircraft emissions, to be able to include into the decision making process the aspect of in-time-reaction against unwanted future. Besides that, a steady monitoring of global aircraft emissions will be necessary. (author) 5 refs.

  19. Supporting the role of community members employed as research staff: Perspectives of community researchers working in addiction research.

    Science.gov (United States)

    True, Gala; Alexander, Leslie B; Fisher, Celia B

    2017-08-01

    Community researchers are laypersons who conduct research activities in their own communities. In addiction and HIV research, community researchers are valued for their insider status and knowledge. At the same time, their presence on the research team raises concerns about coercion and confidentiality when community researchers and participants know each other personally, and the work of navigating between the worlds of research and community leads to moral distress and burnout for some community researchers. In this paper, we draw upon the concept of 'moral experience' to explore the local moral worlds of community researchers in the context of addiction research. In February and March 2010, we conducted focus groups with 36 community researchers employed on community-based addiction studies in the United States to elicit perspectives on ethical and moral challenges they face in their work and insights on best practices to support their role in research. Community researchers described how their values were realized or thwarted in the context of research, and their strategies for coping with shifting identities and competing priorities. They delineated how their knowledge could be used to inform development of research protocols and help principal investigators build and maintain trust with the community researchers on their teams. Our findings contribute to current understandings of the moral experiences of community members employed in research, and inform policies and practices for the growing field of community-engaged research. Funders, research organizations, and research ethics boards should develop guidelines and standards to ensure studies have key resources in place to support community researchers and ensure quality and integrity of community-engaged work. Investigators who work with community researchers should ensure channels for frontline staff to provide input on research protocols and to create an atmosphere where challenges and concerns can be

  20. University and Research Libraries in Europe Working towards Open Access

    Directory of Open Access Journals (Sweden)

    Paul Ayris

    2011-02-01

    Full Text Available This paper presents an overview of ways in which LIBER (Association of European Research Libraries and its members are working towards embedding Open Access approaches to the dissemination of research outputs. It does this in three ways — by looking at current debates in which LIBER has become interested, on the economics of Open Access; by highlighting new projects in which LIBER is engaged, to develop new models and services via Open Access; and by looking at a model of best practice amongst LIBER members for developing an institutional Open Access mandate. The paper ends by drawing conclusions about the vitality of the work of LIBER member libraries in the Open Access landscape.

  1. Tutoring electronic troubleshooting in a simulated maintenance work environment

    Science.gov (United States)

    Gott, Sherrie P.

    1987-01-01

    A series of intelligent tutoring systems, or intelligent maintenance simulators, is being developed based on expert and novice problem solving data. A graded series of authentic troubleshooting problems provides the curriculum, and adaptive instructional treatments foster active learning in trainees who engage in extensive fault isolation practice and thus in conditionalizing what they know. A proof of concept training study involving human tutoring was conducted as a precursor to the computer tutors to assess this integrated, problem based approach to task analysis and instruction. Statistically significant improvements in apprentice technicians' troubleshooting efficiency were achieved after approximately six hours of training.

  2. Working with simulated forms of interaction in health care education

    DEFF Research Database (Denmark)

    Nordentoft, Helle Merete; Olesen, Lektor Birgitte Ravn

    This paper argues that role-play as a simulated form of interaction - live and performed on video - is a creative method which has the potential to generate and support authentic dialogues in practice. In the paper we draw on experiences from 6 interdisciplinary workshops at a Danish hospital...... in which role-play of practice situations - both live and performed on video - formed the launching-pad for participants’ oral and written reflections. Our findings show that role-play has the potential to 1) develop professionals’ sensitivity to the significance of unexpected, embodied and emotional...

  3. [General practice research units in Denmark: multidisciplinary research in support of practical work].

    Science.gov (United States)

    Reventlow, Susanne; Broholm, Katalin Alexa Király; Mäkelä, Marjukka

    2014-01-01

    In Denmark the general practice research units operating in connection with universities provide a home base, training and methodology support for researchers in the field from medical students to general practitioners carrying out practical work. Research issues frequently require a multidisciplinary approach and use of different kinds of materials. Problems arising from the practical work of general practitioners take priority in the wide selection of topics. The units have networked efficiently with organizations of general practitioners and medical education. The combination of research environments has created synergy benefiting everybody and increased the scientific productivity and visibility of the field.

  4. Theory, Modeling and Simulation: Research progress report 1994--1995

    Energy Technology Data Exchange (ETDEWEB)

    Garrett, B.C.; Dixon, D.A.; Dunning, T.H.

    1997-01-01

    The Pacific Northwest National Laboratory (PNNL) has established the Environmental Molecular Sciences Laboratory (EMSL). In April 1994, construction began on the new EMSL, a collaborative research facility devoted to advancing the understanding of environmental molecular science. Research in the Theory, Modeling, and Simulation (TM and S) program will play a critical role in understanding molecular processes important in restoring DOE`s research, development, and production sites, including understanding the migration and reactions of contaminants in soils and ground water, developing processes for isolation and processing of pollutants, developing improved materials for waste storage, understanding the enzymatic reactions involved in the biodegradation of contaminants, and understanding the interaction of hazardous chemicals with living organisms. The research objectives of the TM and S program are fivefold: to apply available electronic structure and dynamics techniques to study fundamental molecular processes involved in the chemistry of natural and contaminated systems; to extend current electronic structure and dynamics techniques to treat molecular systems of future importance and to develop new techniques for addressing problems that are computationally intractable at present; to apply available molecular modeling techniques to simulate molecular processes occurring in the multi-species, multi-phase systems characteristic of natural and polluted environments; to extend current molecular modeling techniques to treat ever more complex molecular systems and to improve the reliability and accuracy of such simulations; and to develop technologies for advanced parallel architectural computer systems. Research highlights of 82 projects are given.

  5. Framing of different types of information needs within simulated work task situations

    DEFF Research Database (Denmark)

    Borlund, Pia

    2016-01-01

    to reflect verificative, conscious topical and muddled topical information needs of each group of test participants. The study shows that it is challenging to formulate verificative simulated work task situations and to incorporate curiosity in the muddled topical simulated work task situations. The results...

  6. Discrete event simulation of crop operations in sweet pepper in support of work method innovation

    NARCIS (Netherlands)

    Ooster, van 't Bert; Aantjes, Wiger; Melamed, Z.

    2017-01-01

    Greenhouse Work Simulation, GWorkS, is a model that simulates crop operations in greenhouses for the purpose of analysing work methods. GWorkS is a discrete event model that approaches reality as a discrete stochastic dynamic system. GWorkS was developed and validated using cut-rose as a case

  7. The Process of Participatory Ergonomics Simulation in Hospital Work System Design

    DEFF Research Database (Denmark)

    Andersen, Simone Nyholm

    2016-01-01

    Participatory ergonomics simulation (PES) is a method to involve workers in simulation and design of their own future work system. Understanding of the process of PES is crucial in order to plan and facilitate the process towards creating an ergonomics work system design supporting both human well...

  8. Medical Team Training: Using Simulation as a Teaching Strategy for Group Work

    Science.gov (United States)

    Moyer, Michael R.; Brown, Rhonda Douglas

    2011-01-01

    Described is an innovative approach currently being used to inspire group work, specifically a medical team training model, referred to as The Simulation Model, which includes as its major components: (1) Prior Training in Group Work of Medical Team Members; (2) Simulation in Teams or Groups; (3) Multidisciplinary Teamwork; (4) Team Leader…

  9. Inner and Outer Life at Work. The Roots and Horizon of Psychoanalytically Informed Work Life Research

    Directory of Open Access Journals (Sweden)

    Linda Lundgaard Andersen

    2012-09-01

    Full Text Available The modern labour market has increasingly put the inner working life on the agenda. This stems from a number of societal changes: the knowledge society and its need of personalised competences and work investments in welfare services, the transformation from subject-object relationships to subject-subject relationships and the emergence of the "learning organisations" and reflexive leadership. All of this has been the subject of critical analyses tracing modern work life identities, conflicts, organisational and societal structuration. Against this background the accounts and conceptualisations of work life involving people to people interactions offered by psychodynamic theories and methods take up a pivotal position. Psychoanalytic organisational and work life research explores how work, organisations and individuals are affected by psychic dynamics, the influence of the unconscious in the forms of human development and interaction situated in a societal context. Based on this substantial work I draw upon two influential psychoanalytical positions—the British Tavistock position and German psychoanalytic social psychology in order to situate and identify how to understand the inner and outer life at work—in a generic display of concepts, methods and epistemology. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1203232

  10. Design and Validation of Control Room Upgrades Using a Research Simulator Facility

    Energy Technology Data Exchange (ETDEWEB)

    Ronald L. Boring; Vivek Agarwal; Jeffrey C. Joe; Julius J. Persensky

    2012-11-01

    Since 1981, the United States (U.S.) Nuclear Regulatory Commission (NRC) [1] requires a plant- specific simulator facility for use in training at U.S. nuclear power plants (NPPs). These training simulators are in near constant use for training and qualification of licensed NPP operators. In the early 1980s, the Halden Man-Machine Laboratory (HAMMLab) at the Halden Reactor Project (HRP) in Norway first built perhaps the most well known set of research simulators. The HRP offered a high- fidelity simulator facility in which the simulator is functionally linked to a specific plant but in which the human-machine interface (HMI) may differ from that found in the plant. As such, HAMMLab incorporated more advanced digital instrumentation and controls (I&C) than the plant, thereby giving it considerable interface flexibility that researchers took full advantage of when designing and validating different ways to upgrade NPP control rooms. Several U.S. partners—the U.S. NRC, the Electrical Power Research Institute (EPRI), Sandia National Laboratories, and Idaho National Laboratory (INL) – as well as international members of the HRP, have been working with HRP to run control room simulator studies. These studies, which use crews from Scandinavian plants, are used to determine crew behavior in a variety of normal and off-normal plant operations. The findings have ultimately been used to guide safety considerations at plants and to inform advanced HMI design—both for the regulator and in industry. Given the desire to use U.S. crews of licensed operators on a simulator of a U.S. NPP, there is a clear need for a research simulator facility in the U.S. There is no general-purpose reconfigurable research oriented control room simulator facility in the U.S. that can be used for a variety of studies, including the design and validation of control room upgrades.

  11. The status of research on CFD-PBM simulation of liquid-liquid two-phase flow in extraction columns

    International Nuclear Information System (INIS)

    Li Shaowei; Jing Shan; Wu Qiulin; Zhang Qi

    2012-01-01

    Computational fluid dynamics (CFD) simulation has gained more and more interest in the chemical engineering researchers and is becoming a useful tool for the chemical engineering research. The research on liquid-liquid two-phase flow CFD simulation in extraction columns is now in its initial stage. There is much work to do for the developing of this research field. The purpose of this article is to review the CFD simulation methods for two-phase flow in extraction column. The population balance model (PBM) is detailedly described in this article because it is the main method used in the two-phase flow CFD simulation currently. Then some examples for the two-phase flow simulation in extraction columns are briefly introduced. The strategy for the research on CFD simulation of two-phase flow in extraction columns is suggested at last. (authors)

  12. Working with Research Integrity-Guidance for Research Performing Organisations: The Bonn PRINTEGER Statement.

    Science.gov (United States)

    Forsberg, Ellen-Marie; Anthun, Frank O; Bailey, Sharon; Birchley, Giles; Bout, Henriette; Casonato, Carlo; Fuster, Gloria González; Heinrichs, Bert; Horbach, Serge; Jacobsen, Ingrid Skjæggestad; Janssen, Jacques; Kaiser, Matthias; Lerouge, Inge; van der Meulen, Barend; de Rijcke, Sarah; Saretzki, Thomas; Sutrop, Margit; Tazewell, Marta; Varantola, Krista; Vie, Knut Jørgen; Zwart, Hub; Zöller, Mira

    2018-05-31

    This document presents the Bonn PRINTEGER Consensus Statement: Working with Research Integrity-Guidance for research performing organisations. The aim of the statement is to complement existing instruments by focusing specifically on institutional responsibilities for strengthening integrity. It takes into account the daily challenges and organisational contexts of most researchers. The statement intends to make research integrity challenges recognisable from the work-floor perspective, providing concrete advice on organisational measures to strengthen integrity. The statement, which was concluded February 7th 2018, provides guidance on the following key issues: § 1. Providing information about research integrity § 2. Providing education, training and mentoring § 3. Strengthening a research integrity culture § 4. Facilitating open dialogue § 5. Wise incentive management § 6. Implementing quality assurance procedures § 7. Improving the work environment and work satisfaction § 8. Increasing transparency of misconduct cases § 9. Opening up research § 10. Implementing safe and effective whistle-blowing channels § 11. Protecting the alleged perpetrators § 12. Establishing a research integrity committee and appointing an ombudsperson § 13. Making explicit the applicable standards for research integrity.

  13. An evaluation of control rod motion simulator of research reactor

    International Nuclear Information System (INIS)

    Sanda

    2010-01-01

    Motion simulator for rod control research reactor has been carried out using a servo motor. Reactor rod motion control at any point should be in the right position, one of the motors that can move in a precise and correct is the servo motor. To ensure that the servo motor to move in accordance with the desired program, then the servo motor function test should be carried out to ensure having good performance. Tests carried out on meshes stress disorder, the load is stable within a certain period and travel time safety control rod up and down, travel time regulating control rods up and down and travel time compensation control rods up and down. In testing the breakdown voltage V out nets at 24 V, 6.5 A with 12 Q load deviation obtained V0= V1 = 0.1% and 0.65% and for the stability of the load in a certain time deviation V = 0.7125% , next to the breakdown voltage V out nets at 12 V, 4.2 A with a 6 Q load deviation obtained V0= V1 = 0.275% and 1.158% for the stability of the load in a certain time deviation V = 1.463% and the net-voltage noise nets on V out 24 V, 4.5 A with 12 Q load deviation obtained V0 = V1 = 0.196% and 0.496% and for the stability of the load in a certain time deviation V = 0.3625%. While the travel time of a safety control rod up and down, up and down the regulator and compensation rise and fall showed a steady linear graph. The results show that the performance of the servo motor is very stable with the working area below the tolerance limit, it is 5% - 10%.(author)

  14. Evidence and research designs in applied sociology and social work research

    DEFF Research Database (Denmark)

    Høgsbro, Kjeld

    2015-01-01

    it had to be repeated all over again. This article tries to answer this question by reviewing the considerations in the history of applied sociology and its relevance for recent social work research. The ambition of delivering a research that has an impact on social work practice is not unique, neither...... of applied sociology and discusses its contributions to understanding questions of validity, evidence, methodology, practical relevance of research and scientific legitimacy in the areas of research which aim at contributing to the practical development of social services for marginalized people. By doing...... this, hopefully the history of applied sociology may prevent deeper mistakes, illusions and misleading in the development of social work research today....

  15. The effect of work pace on workload, motor variability and fatigue during simulated light assembly work

    NARCIS (Netherlands)

    Bosch, T.; Mathiassen, S.E.; Visser, B.; Looze, M.D. de; Dieën, J.V. van

    2011-01-01

    This study investigated the effect of work pace on workload, motor variability and fatigue during light assembly work. Upper extremity kinematics and electromyography (EMG) were obtained on a cycle-to-cycle basis for eight participants during two conditions, corresponding to "normal" and "high" work

  16. Collecting School Counseling Group Work Data: Initiating Consensual Qualitative Research through Practitioner-Researcher Partnerships

    Science.gov (United States)

    Springer, Sarah I.; Land, Christy W.; Moss, Lauren J.; Cinotti, Daniel

    2018-01-01

    Group counseling interventions can be complex to assess and research. Over the years, The "Journal for Specialists in Group Work" ("JSGW") has highlighted many of these challenges and offered valued approaches to designing projects that promote the efficacy and meaningfulness of group work in various settings. Similarly, school…

  17. Simulation of drive of mechanisms, working in specific conditions

    Science.gov (United States)

    Ivanovskaya, A. V.; Rybak, A. T.

    2018-05-01

    This paper presents a method for determining the dynamic loads on the lifting actuator device other than the conventional methods, for example, ship windlass. For such devices, the operation of their drives is typical under special conditions: different environments, the influence of hydrometeorological factors, a high level of vibration, variability of loading, etc. Hoisting devices working in such conditions are not considered in the standard; however, relevant studies concern permissible parameters of the drive devices of this kind. As an example, the article studied the work deck lifting devices - windlass. To construct a model, the windlass is represented by a rod of the variable cross-section. As a result, a mathematical model of the longitudinal oscillations of such rod is obtained. Analytic dependencies have also been obtained to determine the natural frequencies of the lowest forms of oscillations, which are necessary and are the basis for evaluating the parameters of operation of this type of the device.

  18. Working Together: An Empirical Analysis of a Multiclass Legislative-Executive Branch Simulation

    Science.gov (United States)

    Kalaf-Hughes, Nicole; Mills, Russell W.

    2016-01-01

    Much of the research on the use of simulations in the political science classroom focuses on how simulations model different events in the real world, including political campaigns, international diplomacy, and legislative bargaining. In the case of American Politics, many simulations focus on the behavior of Congress and the legislative process,…

  19. Building a Community of Practice for Researchers: The International Network for Simulation-Based Pediatric Innovation, Research and Education.

    Science.gov (United States)

    Cheng, Adam; Auerbach, Marc; Calhoun, Aaron; Mackinnon, Ralph; Chang, Todd P; Nadkarni, Vinay; Hunt, Elizabeth A; Duval-Arnould, Jordan; Peiris, Nicola; Kessler, David

    2018-06-01

    The scope and breadth of simulation-based research is growing rapidly; however, few mechanisms exist for conducting multicenter, collaborative research. Failure to foster collaborative research efforts is a critical gap that lies in the path of advancing healthcare simulation. The 2017 Research Summit hosted by the Society for Simulation in Healthcare highlighted how simulation-based research networks can produce studies that positively impact the delivery of healthcare. In 2011, the International Network for Simulation-based Pediatric Innovation, Research and Education (INSPIRE) was formed to facilitate multicenter, collaborative simulation-based research with the aim of developing a community of practice for simulation researchers. Since its formation, the network has successfully completed and published numerous collaborative research projects. In this article, we describe INSPIRE's history, structure, and internal processes with the goal of highlighting the community of practice model for other groups seeking to form a simulation-based research network.

  20. Culturally Competent Social Work Research: Methodological Considerations for Research with Language Minorities

    Science.gov (United States)

    Casado, Banghwa Lee; Negi, Nalini Junko; Hong, Michin

    2012-01-01

    Despite the growing number of language minorities, foreign-born individuals with limited English proficiency, this population has been largely left out of social work research, often due to methodological challenges involved in conducting research with this population. Whereas the professional standard calls for cultural competence, a discussion…

  1. Engaging workplace representatives in research: what recruitment strategies work best?

    Science.gov (United States)

    Coole, C; Nouri, F; Narayanasamy, M; Baker, P; Khan, S; Drummond, A

    2018-05-23

    Workplaces are key stakeholders in work and health but little is known about the methods used to recruit workplace representatives (WRs), including managers, occupational health advisers and colleagues, to externally funded healthcare research studies. To detail the strategies used in recruiting WRs from three areas of the UK to a qualitative study concerning their experience of employees undergoing hip or knee replacement, to compare the strategies and inform recruitment methods for future studies. Six strategies were used to recruit WRs from organizations of different sizes and sectors. Data on numbers approached and responses received were analysed descriptively. Twenty-five WRs were recruited. Recruitment had to be extended outside the main three study areas, and took several months. It proved more difficult to recruit from non-service sectors and small- and medium-sized enterprises. The most successful strategies were approaching organizations that had participated in previous research studies, or known professionally or personally to team members. Recruiting a diverse sample of WRs to healthcare research requires considerable resources and persistence, and a range of strategies. Recruitment is easier where local relationships already exist; the importance of building and maintaining these relationships cannot be underestimated. However, the potential risks of bias and participant fatigue need to be acknowledged and managed. Further studies are needed to explore how WRs can be recruited to health research, and to identify the researcher effort and costs involved in achieving unbiased and representative samples.

  2. The Iterative Design Process in Research and Development: A Work Experience Paper

    Science.gov (United States)

    Sullivan, George F. III

    2013-01-01

    The iterative design process is one of many strategies used in new product development. Top-down development strategies, like waterfall development, place a heavy emphasis on planning and simulation. The iterative process, on the other hand, is better suited to the management of small to medium scale projects. Over the past four months, I have worked with engineers at Johnson Space Center on a multitude of electronics projects. By describing the work I have done these last few months, analyzing the factors that have driven design decisions, and examining the testing and verification process, I will demonstrate that iterative design is the obvious choice for research and development projects.

  3. Basic geomechanics research - a condition for excavation working in salt rock strata

    International Nuclear Information System (INIS)

    Menzel, W.; Boehnel, H.; Weber, D.

    1990-01-01

    The institute for mining safety has an interdisciplinary team of experts (mountain engineers, geotechnicians, geologists, measurement engineers, physicists, mathematicians). The institute works on the four areas: Geotechnical characteristic value determination in the laboratory - material characteristics - stress-strain rate laws; geotechnical characteristic value determination in the rock - field measurements tension state - deformation state; model development - computer simulation; dimensioning and layout design, geotechnical safety analyses. At two examples, it is to be shown that the department can base its work on the newest findings of fundamental research. (orig./HS) [de

  4. Simulation of multiple personalities: a review of research comparing diagnosed and simulated dissociative identity disorder.

    Science.gov (United States)

    Boysen, Guy A; VanBergen, Alexandra

    2014-02-01

    Dissociative Identity Disorder (DID) has long been surrounded by controversy due to disagreement about its etiology and the validity of its associated phenomena. Researchers have conducted studies comparing people diagnosed with DID and people simulating DID in order to better understand the disorder. The current research presents a systematic review of this DID simulation research. The literature consists of 20 studies and contains several replicated findings. Replicated differences between the groups include symptom presentation, identity presentation, and cognitive processing deficits. Replicated similarities between the groups include interidentity transfer of information as shown by measures of recall, recognition, and priming. Despite some consistent findings, this research literature is hindered by methodological flaws that reduce experimental validity. Copyright © 2013 Elsevier Ltd. All rights reserved.

  5. The Process of Participatory Ergonomics Simulation in Hospital Work System Design

    OpenAIRE

    Andersen, Simone Nyholm

    2016-01-01

    Participatory ergonomics simulation (PES) is a method to involve workers in simulation and design of their own future work system. Understanding of the process of PES is crucial in order to plan and facilitate the process towards creating an ergonomics work system design supporting both human well-being and overall system performance. With outset in two cases of PES in hospital work system design, this study investigates the elements of the PES process and their interrelations. The aim is to ...

  6. Noise Simulations of the High-Lift Common Research Model

    Science.gov (United States)

    Lockard, David P.; Choudhari, Meelan M.; Vatsa, Veer N.; O'Connell, Matthew D.; Duda, Benjamin; Fares, Ehab

    2017-01-01

    The PowerFLOW(TradeMark) code has been used to perform numerical simulations of the high-lift version of the Common Research Model (HL-CRM) that will be used for experimental testing of airframe noise. Time-averaged surface pressure results from PowerFLOW(TradeMark) are found to be in reasonable agreement with those from steady-state computations using FUN3D. Surface pressure fluctuations are highest around the slat break and nacelle/pylon region, and synthetic array beamforming results also indicate that this region is the dominant noise source on the model. The gap between the slat and pylon on the HL-CRM is not realistic for modern aircraft, and most nacelles include a chine that is absent in the baseline model. To account for those effects, additional simulations were completed with a chine and with the slat extended into the pylon. The case with the chine was nearly identical to the baseline, and the slat extension resulted in higher surface pressure fluctuations but slightly reduced radiated noise. The full-span slat geometry without the nacelle/pylon was also simulated and found to be around 10 dB quieter than the baseline over almost the entire frequency range. The current simulations are still considered preliminary as changes in the radiated acoustics are still being observed with grid refinement, and additional simulations with finer grids are planned.

  7. The SIMRAND methodology - Simulation of Research and Development Projects

    Science.gov (United States)

    Miles, R. F., Jr.

    1984-01-01

    In research and development projects, a commonly occurring management decision is concerned with the optimum allocation of resources to achieve the project goals. Because of resource constraints, management has to make a decision regarding the set of proposed systems or tasks which should be undertaken. SIMRAND (Simulation of Research and Development Projects) is a methodology which was developed for aiding management in this decision. Attention is given to a problem description, aspects of model formulation, the reduction phase of the model solution, the simulation phase, and the evaluation phase. The implementation of the considered approach is illustrated with the aid of an example which involves a simplified network of the type used to determine the price of silicon solar cells.

  8. Perspectives for research of the procrastination phenomenon in professional work

    Directory of Open Access Journals (Sweden)

    Valentina V. Barabanshchikova

    2015-12-01

    Full Text Available The paper describes the current state of the procrastination phenomenon in professional work, reviews the basic unexplored aspects in this area, and highlights the promising areas of scientific analysis. The survey of the existing literature periodization shows that the quantity of researches devoted to procrastination is growing exponentially every year. In spite of a pronounced research interest in this construct, in native and foreign psychological science procrastination phenomenon in the professional work is represented insufficiently. Firstly, there is no common and generally accepted definition of procrastination (Corkin, Yu, Lindt, 2011; Steel, 2010; Krause, Freund, 2014, that suggests that there is a deep terminological crisis in this area. Secondly, the characteristic of delaying the implementation of the elements of workload is represented only by the example of a fairly narrow range of professional activities, which makes it relevant to study the specificity of the differentiated functioning of the phenomenon on the material of a wide range of professions. Thirdly, in psychology there are no information about the peculiarities of the so-called “active” procrastination manifestations in professional activity, which is the tendency of conscious assignments delaying to achieve the optimum final result (Chu, Choi, 2005; Choi, Moran, 2009. Fourthly, there is an acute shortage of standardized psychodiagnostic tools to evaluate this phenomenon in work (most of the existing methods have been tested on samples of students and are aimed at identifying academic procrastination. In the fifth place, there are no science-based allocation of methods of coping with destructive manifestations of the psychological strategy of the job functions postponement in a professional work.

  9. Telecommuting (Work-At-Home) at NASA Lewis Research Center

    Science.gov (United States)

    Srinidhi, Saragur M.

    1994-01-01

    This report presents a study in evaluating the viability of providing a work-at-home (telecommuting) program for Lewis Research Center's corporate employees using Integrated Services Digital Network (ISDN). Case studies have been presented for a range of applications from casual data access to interactive access. The network performance of telemedia applications were studied against future requirements for such level of remote connectivity. Many of the popular ISDN devices were characterized for network and service functionality. A set of recommendations to develop a telecommuting policy have been proposed.

  10. Research work for improving LWR safety. 1991 annual report

    International Nuclear Information System (INIS)

    1992-08-01

    The work performed in 1991 for the PNS project centers on various phenomena of severe fuel damage and on selected aspects of a core meltdown accident, relating to aerosol behaviour and filter engineering, and to methods of assessing and minimizing the radiological impacts of a reactor accident. One paper included in this annual report summarizes the evaluation of experiments carried out in 1990 at the Wuerenlingen PROTEUS reactor. The 1991 task programme of the project for the first time included research into extreme load conditions affecting the containment in a core meltdown accident; first results are given of the experiments performed. (orig./DG) [de

  11. Motion Simulation Research Related Short Term Training Attachment to TARDEC

    Science.gov (United States)

    2013-04-01

    had to ensure that they could show the value of this advanced technology to its clients, rather than the clients perceiving it as an experimental...Surroundings Image Generation Controller Software SCRAM Net Comms to Sim Terra Vista Detailed terrain modelling VR Forces Simulation Scenario...Kelvin Oie, who is the neuroscience manager. The overlap between the respective organisations’ research goals was realised and benefits of

  12. Researching and Working for Transgender Youth: Contexts, Problems and Solutions

    Directory of Open Access Journals (Sweden)

    Tiffany Jones

    2016-08-01

    Full Text Available In May 2016, two events epitomized the complexities of working for global transgender youth rights. First, United Nations Educational Scientific and Cultural Organisation (UNESCO hosted a ministerial event in which education ministers from around the world released a call to action for protection of students on the basis of their gender identity and expression in schools. Second, the United Nations (UN hosted an event celebrating the family, attended by conservative ministers and activists who mobilized family protectionist discourse against transgender students. This article contemplates, in light of transgender activist Raewyn Connell’s Southern Theory contributions, the complexity of global research and work for transgender youth. It considers key informant interviews with 50 stakeholders in the global push for transgender student rights in education, including members of government and non-government organisations, and academics from Northern and Southern countries. Problems in aiding transgender youth at the global level included safety concerns, the impacts of conservative advocates and media backlash (within family and national protectionist discourses, cultural complexities hampering engagement and translation, dissemination hindrances pertaining to established publishing biases, and financial and collaboration barriers. Solutions including virtual work; multi-level leadership; alliance-building; representation; visibility of transgender youth citizenship and family membership; and legal, financial and capacity-building aid are considered.

  13. Reactor training simulator for the Replacement Research Reactor (RRR)

    International Nuclear Information System (INIS)

    Etchepareborda, A; Flury, C.A; Lema, F; Maciel, F; Alegrechi, D; Damico, M; Ibarra, G; Muguiro, M; Gimenez, M; Schlamp, M; Vertullo, A

    2004-01-01

    The main features of the ANSTO Replacement Research Reactor (RRR) Reactor Training Simulator (RTS) are presented.The RTS is a full-scope and partial replica simulator.Its scope includes a complete set of plant normal evolutions and malfunctions obtained from the plant design basis accidents list.All the systems necessary to implement the operating procedures associated to these transients are included.Within these systems both the variables connected to the plant SCADA and the local variables are modelled, leading to several thousands input-output variables in the plant mathematical model (PMM).The trainee interacts with the same plant SCADA, a Foxboro I/A Series system.Control room hardware is emulated through graphical displays with touch-screen.The main system models were tested against RELAP outputs.The RTS includes several modules: a model manager (MM) that encapsulates the plant mathematical model; a simulator human machine interface, where the trainee interacts with the plant SCADA; and an instructor console (IC), where the instructor commands the simulation.The PMM is built using Matlab-Simulink with specific libraries of components designed to facilitate the development of the nuclear, hydraulic, ventilation and electrical plant systems models [es

  14. ISS Material Science Research Rack HWIL Interface Simulation

    Science.gov (United States)

    Williams, Philip J.; Ballard, Gary H.; Crumbley, Robert T. (Technical Monitor)

    2002-01-01

    In this paper, the first Material Science Research Rack (MSRR-1) hardware-in-the-loop (HWIL) interface simulation is described. Dynamic Concepts developed this HWIL simulation system with funding and management provided by the Flight Software group (ED14) of NASA-MSFC's Avionics Department. The HWIL system has been used both as a flight software development environment and as a software qualification tool. To fulfill these roles, the HWIL simulator accurately models the system dynamics of many MSRR-1 subsystems and emulates most of the internal interface signals. The modeled subsystems include the Experiment Modules, the Thermal Environment Control System, the Vacuum Access System, the Solid State Power Controller Module, and the Active Rack Isolation Systems. The emulated signals reside on three separate MIL-STD-1553B digital communication buses, the ISS Medium Rate Data Link, and several analog controller and sensor signals. To enhance the range of testing, it was necessary to simulate several off-nominal conditions that may occur in the interfacing subsystems.

  15. Development of an augmented reality based simulation system for cooperative plant dismantling work

    International Nuclear Information System (INIS)

    Ishii, Hirotake; Man, Zhiyuan; Yan, Weida; Shimoda, Hiroshi; Izumi, Masanori

    2015-01-01

    An augmented reality-based simulation system for cooperative plant dismantling work has been developed and evaluated. In the system, behaviors of virtual objects such as the dismantling target, chain blocks, and trolleys are physically simulated. Their appearance is superimposed on camera images captured with cameras on users' tablet devices. The users can manipulate virtual objects cooperatively via touch operation. They can cut the dismantling targets, lift them on the trolleys using chain blocks, and convey them through narrow passages to ascertain whether the dismantling targets can be conducted without colliding with the passages. During the simulation, collisions between the virtual objects and real work environment are detected based on their three-dimensional shape data measured in advance. The collided parts are visualized using augmented reality superimposition. Four evaluators assessed the simulation system. Results show that the simulation system can be useful for prior examination of dismantling works, but some points were also found to need improvement. (author)

  16. Simulation research on operation scheme of dissymmetrical main engine of CODOG propulsion system

    Directory of Open Access Journals (Sweden)

    HUANG Bin

    2018-02-01

    Full Text Available [Objectives] How to maintain propulsion capability in a CODOG propulsion system damage situation has important significance. [Methods] A ‘Hull-Engine-CPP-Rudder’ simulation model of a CODOG marine power plant is established on Simulink using the modularized method, and a dissymmetrical main engine urgent working mode is proposed and simulated. [Results] The results show that in the dissymmetrical working mode, two different engines cannot work simultaneously at designed capacity. However, by adjusting the pitch of the CPP, one engine can work at designed capacity and the other can work at partial load capacity; under this working mode, if high speed is demanded, the gas turbine should work at designed capacity. The CPP pitch driven by diesel should be maintained at a high value near the maximum. The maximum speed of this working mode is 84.4% of the designed speed, which is higher than the speed of the single shaft working mode driven by a gas turbine. [Conclusions] The research results of this paper can provide useful references for the design of ship propulsion systems.

  17. Simulation and experimental research on line throwing rocket with flight

    Directory of Open Access Journals (Sweden)

    Wen-bin Gu

    2014-06-01

    Full Text Available The finite segment method is used to model the line throwing rocket system. A dynamic model of line throwing rocket with flight motion based on Kane's method is presented by the kinematics description of the system and the consideration of the forces acting on the system. The experiment designed according to the parameters of the dynamic model is made. The simulation and experiment results, such as range, velocity and flight time, are compared and analyzed. The simulation results are basically agreed with the test data, which shows that the flight motion of the line throwing rocket can be predicted by the dynamic model. A theoretical model and guide for the further research on the disturbance of rope and the guidance, flight control of line throwing rocket are provided by the dynamic modeling.

  18. Select review of the recent (1979-1983) behavioral research literature on training simulators

    International Nuclear Information System (INIS)

    Laughery, K.R.

    1985-05-01

    This report summarizes some selected reports of behavioral research performed in the years 1979 to 1983 on training simulator application technology, and discusses findings related to nuclear power plant operators' simulator training. Findings are organized as related to the design, testing, and use of training simulators. Topics include Simulator Fidelity in Training Effectiveness, Operator Performance Measurement, Measuring Simulator Effectiveness, and Simulator Utilization Practices

  19. Using Blackboard Wiki Pages as a Shared Space for Simulating the Professional Translation Work Environment

    Science.gov (United States)

    Vine, Juliet

    2015-01-01

    The Work-Integrated Simulation for Translators module is part of a three year undergraduate degree in translation. The semester long module aims to simulate several aspects of the translation process using the Blackboard virtual learning environment's Wikis as the interface for completing translation tasks. For each translation task, one of the…

  20. Action research, simulation, team communication, and bringing the tacit into voice society for simulation in healthcare.

    Science.gov (United States)

    Forsythe, Lydia

    2009-01-01

    In healthcare, professionals usually function in a time-constrained paradigm because of the nature of care delivery functions and the acute patient populations usually in need of emergent and urgent care. This leaves little, if no time for team reflection, or team processing as a collaborative action. Simulation can be used to create a safe space as a structure for recognition and innovation to continue to develop a culture of safety for healthcare delivery and patient care. To create and develop a safe space, three qualitative modified action research institutional review board-approved studies were developed using simulation to explore team communication as an unfolding in the acute care environment of the operating room. An action heuristic was used for data collection by capturing the participants' narratives in the form of collaborative recall and reflection to standardize task, process, and language. During the qualitative simulations, the team participants identified and changed multiple tasks, process, and language items. The simulations contributed to positive changes for task and efficiencies, team interactions, and overall functionality of the team. The studies demonstrated that simulation can be used in healthcare to define safe spaces to practice, reflect, and develop collaborative relationships, which contribute to the realization of a culture of safety.

  1. A web based semi automatic frame work for astrobiological researches

    Directory of Open Access Journals (Sweden)

    P.V. Arun

    2013-12-01

    Full Text Available Astrobiology addresses the possibility of extraterrestrial life and explores measures towards its recognition. Researches in this context are founded upon the premise that indicators of life encountered in space will be recognizable. However, effective recognition can be accomplished through a universal adaptation of life signatures without restricting solely to those attributes that represent local solutions to the challenges of survival. The life indicators should be modelled with reference to temporal and environmental variations specific to each planet and time. In this paper, we investigate a semi-automatic open source frame work for the accurate detection and interpretation of life signatures by facilitating public participation, in a similar way as adopted by SETI@home project. The involvement of public in identifying patterns can bring a thrust to the mission and is implemented using semi-automatic framework. Different advanced intelligent methodologies may augment the integration of this human machine analysis. Automatic and manual evaluations along with dynamic learning strategy have been adopted to provide accurate results. The system also helps to provide a deep public understanding about space agency’s works and facilitate a mass involvement in the astrobiological studies. It will surely help to motivate young eager minds to pursue a career in this field.

  2. Email solicitation for scholarly work--a single researcher's perspective.

    Science.gov (United States)

    Bugeja, Justine; Grech, Victor

    2015-01-01

    Publishing is important for career progression. The traditional journal model results in subscribers bearing publication costs. The eagerness with which researchers seek journals for the publishing of their work, along with the internet, has resulted in the creation of a new model called open access (OA). Author/s or their institution/s pay an actual publication fee. This has in turn resulted in the creation of questionable journals which charge steep publishing fees. Emails soliciting publication to one of the authors (VG) were collected for the month of March 2015. Information collected included costs of OA publishing, and whether or not this information was readily available. The appropriateness of said solicitations was also assessed with regard to topics with which the targeted author was familiar. There was a total of 44 solicitations: 3 were duplicates. Out of 41 solicitations, 20 (49%) were appropriate. The open access fee was readily available in 27 out of 41 solicitations (66%). The open access fee averaged $475, ranging from $25 to $1500. The only journal which provided true OA was Medical Principles and Practice, with no fees charged whatsoever. Potential authors should carefully investigate OA journals prior to choosing journals wherein to submit their work.

  3. "'Lad" Research, the Reproduction of Stereotypes? Ethnographic Dilemmas When Researching Boys from Working-Class Backgrounds

    Science.gov (United States)

    Rosvall, Per-Åke

    2015-01-01

    Previous research presented in this journal and elsewhere has suggested that vocational education is highly gender segregated and it is the heavy industrial sectors such as industry, vehicle and construction programmes that mainly attract boys with an anti-school attitude who are not interested in academic school work. However, there are good…

  4. Final Technical Report for Center for Plasma Edge Simulation Research

    Energy Technology Data Exchange (ETDEWEB)

    Pankin, Alexei Y.; Bateman, Glenn; Kritz, Arnold H.

    2012-02-29

    The CPES research carried out by the Lehigh fusion group has sought to satisfy the evolving requirements of the CPES project. Overall, the Lehigh group has focused on verification and validation of the codes developed and/or integrated in the CPES project. Consequently, contacts and interaction with experimentalists have been maintained during the course of the project. Prof. Arnold Kritz, the leader of the Lehigh Fusion Group, has participated in the executive management of the CPES project. The code development and simulation studies carried out by the Lehigh fusion group are described in more detail in the sections below.

  5. Biological research work within the Association of the Government-Sponsored Research Institutions (AGF)

    International Nuclear Information System (INIS)

    1991-01-01

    Six of the thirteen government-sponsored research institutions in the Federal Republic of Germany carry out research work for the protection of the population against the harmful effects of ionizing radiation. Their activities in this field concentrate on the following four points of main interest: analysis of radiation-induced processes resulting in biological radiation injury; description and analysis of complex radiation effects on man; medical applications of ionizing radiation for diagnosis and therapy; concepts and methods for radiological protection. The work reported reviews the main problems encountered in the above-mentioned subject fields and presents examples of significant results, with illustrations. The original research papers and their authors are listed separately under the four points of main interest. (orig./MG) [de

  6. The Baltimore Therapeutic Equipment work simulator: biomechanical and physiological norms for three attachments in healthy men.

    Science.gov (United States)

    Bhambhani, Y; Esmail, S; Brintnell, S

    1994-01-01

    The Baltimore Therapeutic Equipment (BTE) work simulator is routinely used by occupational therapists in functional capacity evaluation. Currently, there is a lack of normative data for various attachments on this instrument. The purposes of this study were to (a) establish norms for the biomechanical and physiological responses during three tasks on the BTE work simulator, namely, wheel-turn, push-pull, and overhead-reach; (b) compare these responses during the three tasks, and (c) examine the interrelationships of these responses during the tasks. Twenty healthy men completed five testing sessions: (a) task familiarization on the BTE work simulator to identify the work intensity, which was perceived as hard on the Borg scale; (b) an incremental arm ergometer exercise test to determine their peak oxygen uptake (pVO2) and peak heart rate (pHR); and (c) one of the three tasks on the BTE work simulator for 4 min in each of the next three sessions. Analysis of variance indicated that torque, work, and power during the overhead-reach were significantly higher (p = .000) compared with the wheel-turn and push-pull tasks. However, no significant differences (p > .05) were observed among the tasks for the VO2 and HR, which were approximately 50% and 70% of pVO2 and pHR respectively. Although there was a significant relationship (p batteries, and that there is no consistent relationship between cardiorespiratory fitness and performance of various tasks on the BTE work simulator.

  7. Simulation of stevedoring work in the Klaipėda oil terminal

    Directory of Open Access Journals (Sweden)

    D. Makackas

    2002-10-01

    Full Text Available The paper presents the approach of developing simulation models of stevedoring work in oil terminal using aggregate approach and simulation system ARENA. Aggregate approach permits to develop formal specification of simulated systems. Aggregate specification of the system is presented as a set of interacting piece-linear aggregates. Controlling sequences are used for formal description of each piece-linear aggregate. Transformation of aggregate formal specification to ARENA system operators permits to develop a simulation model. The developed model permits to evaluate characteristics of the Klaipėda oil terminal which are used both in queuing theory and analysing timing properties of real-time systems.

  8. Games and Simulations in Informal Science Education. WCER Working Paper No. 2010-14

    Science.gov (United States)

    Squire, Kurt; Patterson, Nathan

    2010-01-01

    This paper explores the possibilities and challenges games and simulations pose for informal science education. The authors begin with a brief overview of the recent history of games and games research. They then attempt to clarify the distinctions between games and simulations. Next, they examine types of informal learning…

  9. Data Mining for Social Work Students: Teaching Practice-Based Research in Conjunction with a Field Work Placement

    Science.gov (United States)

    Auslander, Gail K.; Rosenne, Hadas

    2016-01-01

    Although research studies are important for social work students, the students rarely like research classes or see their value. At the Hebrew University of Jerusalem, one group of BSW students was encouraged to carry out the required research in their field work setting, the Hadassah University Medical Center. Students used data mining, that is,…

  10. Development of a research nuclear reactor simulator using LABVIEW®

    Energy Technology Data Exchange (ETDEWEB)

    Lage, Aldo Marcio Fonseca; Mesquita, Amir Zacarias; Pinto, Antonio Juscelino; Souza, Luiz Claudio Andrade [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2015-07-01

    The International Atomic Energy Agency recommends the use of safety and friendly interfaces for monitoring and controlling the operational parameters of the nuclear reactors. The most important variable in the nuclear reactors control is the power released by fission of the fuel in the core which is directly proportional to neutron flux. It was developed a digital system to simulate the neutron evolution flux and monitoring their interaction on the other operational parameters. The control objective is to bring the reactor power from its source level (mW) to a few W. It is intended for education of basic reactor neutronic principles such as the multiplication factor, criticality, reactivity, period, delayed neutron and control by rods. The 250 kW IPR-R1 TRIGA research reactor at Nuclear Technology Development Center - CDTN (Belo Horizonte/Brazil) was used as reference. TRIGA reactors, developed by General Atomics (GA), are the most widely used research reactor in the world. They are cooled by light water under natural convection and are characterized by being inherently safety. The simulation system was developed using the LabVIEW® (Laboratory Virtual Instruments Engineering Workbench) software, considering the modern concept of virtual instruments (VI's). The main purpose of the system is to provide to analyze the behavior, and the tendency of some processes that occur in the reactor using a user-friendly operator interface. The TRIGA simulator system will allow the study of parameters, which affect the reactor operation, without the necessity of using the facility.(author)

  11. Development of a research nuclear reactor simulator using LABVIEW®

    International Nuclear Information System (INIS)

    Lage, Aldo Marcio Fonseca; Mesquita, Amir Zacarias; Pinto, Antonio Juscelino; Souza, Luiz Claudio Andrade

    2015-01-01

    The International Atomic Energy Agency recommends the use of safety and friendly interfaces for monitoring and controlling the operational parameters of the nuclear reactors. The most important variable in the nuclear reactors control is the power released by fission of the fuel in the core which is directly proportional to neutron flux. It was developed a digital system to simulate the neutron evolution flux and monitoring their interaction on the other operational parameters. The control objective is to bring the reactor power from its source level (mW) to a few W. It is intended for education of basic reactor neutronic principles such as the multiplication factor, criticality, reactivity, period, delayed neutron and control by rods. The 250 kW IPR-R1 TRIGA research reactor at Nuclear Technology Development Center - CDTN (Belo Horizonte/Brazil) was used as reference. TRIGA reactors, developed by General Atomics (GA), are the most widely used research reactor in the world. They are cooled by light water under natural convection and are characterized by being inherently safety. The simulation system was developed using the LabVIEW® (Laboratory Virtual Instruments Engineering Workbench) software, considering the modern concept of virtual instruments (VI's). The main purpose of the system is to provide to analyze the behavior, and the tendency of some processes that occur in the reactor using a user-friendly operator interface. The TRIGA simulator system will allow the study of parameters, which affect the reactor operation, without the necessity of using the facility.(author)

  12. Simulating Real Life: Enhancing Social Work Education on Alcohol Screening and Brief Intervention

    Science.gov (United States)

    Osborne, Victoria A.; Benner, Kalea; Sprague, Debra J.; Cleveland, Ivy N.

    2016-01-01

    Social work students typically use role play with student colleagues to practice clinical intervention skills. Practice with simulated clients (SCs) rather than classmates changes the dynamics of the role play and may improve learning. This is the first known study to employ the SC model in substance use assessment in social work education. Social…

  13. Technology of research of hydroturbine unit work using seismic methods

    Science.gov (United States)

    Seleznev, V. S.; Liseikin, A. V.; Gromyko, P. V.; Soloviev, V. M.

    2013-05-01

    On August, 17, 2009 one of the most significant accident in hydropower engineering was happened at Sayano-Shushenskaya Hydroelectric Power Station. Specialists of Geophysical Survey SB RAS took part in the State Committee on investigation of the accident cause at Sayano-Shushenskaya HPS. It was determined, that the cause of the accident was a break of stud-bolts on the turbine cover. Why stud-bolts did not stand a load? There were assumptions that hydraulic shock provoked the accident. But, if it is so, seismic station "Cheremushky", situated in 4 km away from the HPS, should has a record of this event. First of all, investigating the record, got at the seismic station in the moment of the accident, it was determined that strength of seismic waves, recorded at the moment of the accident, did not exceed strength of waves got at trotyl explosion of 500 g at a distance to 4 km. The version of hydraulic shock was not proved. There were distinguished low-frequency oscillations and it was determined that the hydroturbine unit (HU) had been raised up more then 10 m in height for 10 sec. Analyzing the seismic station records during the period of more than a year before the accident and records of operating modes of different HU, there was determined that oscillations radiated by second (damaged) HU were approximately 1.5 times more intense than oscillations from all other HU. After the accident at Sayano-Shushenskaya HPS hydroturbine units were started in turns: at first there were started hydroturbine units of old construction (3, 4, 5, 6), then HP of new construction (1, 7, 8, 9). We installed 10 - 15 three-component seismic stations in different points around a HU and studied field of seismic oscillations from it's work. It was determined, that HU radiates a set of monochromatic oscillations divisible by speed of rotation equal to 2.381 Hz. Change of these signals amplitude is connected with change of HU operation modes. Research of changes in oscillations spectral

  14. Review of Research Work on Ti-BASED Composite Coatings

    Science.gov (United States)

    Gabbitas, Brian; Salman, Asma; Zhang, Deliang; Cao, Peng

    The service life of industrial components is limited predominantly by Chemical corrosion/mechanical wear. The project is concerned with the investigation of the capability of Ti(Al,O)/Al2O3 coatings to improve the service life of tool steel (H13) used for dies in aluminium high pressure die casting. This paper gives a general review on the research work conducted at the University of Waikato on producing and evaluating the titanium/alumina based composite coatings. The powder feedstocks for making the composite coatings were produced by high energy mechanical milling of a mixture of Al and TiO2 powders in two different molar ratios followed by a thermal reaction process. The feedstocks were then thermally sprayed using a high velocity air-fuel (HVAF) technique on H13 steel substrates to produce a Ti(Al,O)/Al2O3 composite coatings. The performance of the coating was assessed in terms of thermal shock resistance and reaction kinetics with molten aluminium. The composite powders and coatings were characterized using scanning electron microscopy (SEM), optical microscopy and X-ray diffractometry (XRD).

  15. FEATURES OF THE RESEARCH WORK ELEMENTS DEFORMABILITY OF RAILWAY TRACK

    Directory of Open Access Journals (Sweden)

    I. O. Bondarenko

    2015-06-01

    Full Text Available Purpose. The scientific paper is supposed the determination of basic physical and structural conditions in modeling life cycle of the elements of the railway line for the study of deformation processes as the basis of normative base of the track at the condition of railway safety. Methodology. To achieve the aim principles of the elasticity theory and wave propagation process in the description of the interaction between the track and rolling stock were used. Findings. The basic physical and structural conditions under which it is necessary to carry out the simulation of the life cycle of the elements of the railway line for the study of deformation processes were determined. The basic physical and structural principles of drawing the design schemes of railway track elements for the process assessment of the track deformation work were formulated. The decision correctness and the possibility of the problem solution are proved. Originality. The study of the track reliability questions motivates the development of new models, allow considering it for some developments. There is a need to identify the main physical and structural conditions for assembly design schemes based on assessment and prediction of possible track state changes during its operation. The paper presents the basic principles of physical and structural drafting design schemes of railway line items for which Huygens’ principle is implemented. This principle can be performed only when the four dimensional space: the volume changing over time is considered. Practical value. Analytical models applied in determining the parameters of strength and resistance lines, fully satisfy the task, but can not be used to determine the parameters of track reliability. One of the main impossibility factors of these models is quasidynamic approach. Therefore, as a rule, receive and examine not only dynamic process of a railway track, but also its consequences. Besides, these models are related to

  16. Simulation research of acousto optic modulator drive based on Multisim

    Science.gov (United States)

    Wang, Shiqian; Guo, Yangkuan; Zhu, Lianqing; Na, Yunxiao; Zhang, Yinmin; Liu, Qianzhe

    2013-10-01

    The acousto optic modulator drive is mainly made with 2 amplitude shift keying (2ASK)circuit, pre-amplifier circuit and power operational amplifier circuit, and the simulation of the acousto optic modulator drive is realized. Firstly, the acousto optic modulator drive works as follows.The modulation function is realized by the analoged switch circuit, and the on-off of the analoged switch chip (CD4066) are controlled by the pulse signal generated by the electronic conversion circuit. The voltage amplification of the modulated signal is achieved by two reverse proportional operation implements voltage amplifier circuit, and the circuit is mainly made with the AD8001 chip. Then the amplified signal is transfered into a two-stage power operational amplifier circuit of class C which is mainly made with the chip of MRF158. Secondly, both of the simulating structures and the union debugging based on the designed system are realized by Multisim. Finally, obtaining the modulation signal of 150(MHz) frequency and 5(μs) pulse width illustrates that a 2ASk modulation of the 150 (MHz)carrier signal and the 20(kHz) modulation signal is achieved. Besides, as the frequency of input signal and amplitude of voltage change, the output power of the power operational amplifier circuit also changes, and the conclusion is drawn that the output power increases when the frequency of input signal decreases and the amplitude of voltage increases. The component selection of the drive's PCB design, the performance parameter and of the actual circuit and the debugging of the actual circuit are based on the simulation results.

  17. The Impact of Sleep Restriction and Simulated Physical Firefighting Work on Acute Inflammatory Stress Responses.

    Science.gov (United States)

    Wolkow, Alexander; Ferguson, Sally A; Vincent, Grace E; Larsen, Brianna; Aisbett, Brad; Main, Luana C

    2015-01-01

    This study investigated the effect restricted sleep has on wildland firefighters' acute cytokine levels during 3 days and 2 nights of simulated physical wildfire suppression work. Firefighters completed multiple days of physical firefighting work separated by either an 8-h (Control condition; n = 18) or 4-h (Sleep restriction condition; n = 17) sleep opportunity each night. Blood samples were collected 4 times a day (i.e., 06:15, 11:30, 18:15, 21:30) from which plasma cytokine levels (IL-6, IL-8, IL-1β, TNF-α, IL-4, IL-10) were measured. The primary findings for cytokine levels revealed a fixed effect for condition that showed higher IL-8 levels among firefighters who received an 8-h sleep each night. An interaction effect demonstrated differing increases in IL-6 over successive days of work for the SR and CON conditions. Fixed effects for time indicated that IL-6 and IL-4 levels increased, while IL-1β, TNF-α and IL-8 levels decreased. There were no significant effects for IL-10 observed. Findings demonstrate increased IL-8 levels among firefighters who received an 8-h sleep when compared to those who had a restricted 4-h sleep. Firefighters' IL-6 levels increased in both conditions which may indicate that a 4-h sleep restriction duration and/or period (i.e., 2 nights) was not a significant enough stressor to affect this cytokine. Considering the immunomodulatory properties of IL-6 and IL-4 that inhibit pro-inflammatory cytokines, the rise in IL-6 and IL-4, independent of increases in IL-1β and TNF-α, could indicate a non-damaging response to the stress of simulated physical firefighting work. However, given the link between chronically elevated cytokine levels and several diseases, further research is needed to determine if firefighters' IL-8 and IL-6 levels are elevated following repeated firefighting deployments across a fire season and over multiple fire seasons.

  18. Review of research on teacher's work motivation and job satisfaction

    OpenAIRE

    山下, 顕史; Yamashita, Kenji

    2010-01-01

    In this text, the theory was arranged concerning the teacher's job satisfaction and work motivation. The job satisfaction and the work motivation are especially receiving a big influence from the organizational culture. Moreover, when the organization was managed, there are necessities of the payment of special attention to job satisfaction and work motivation. The teacher's job satisfaction and work motivation of are influenced from not only the factor in the school organization but also the...

  19. Capacity for work researching method in animal experiment

    International Nuclear Information System (INIS)

    Pul'nov, V.N.; Mashneva, N.I.

    1978-01-01

    The existing methods of examining the work capacity of animals are discussed with reference to extrapolation of animal data to man. A modified procedure for measuring maximal physical strength is proposed, whereby static endurance of animals at a given exercise rate can be measured. For an integrated evaluation of work capacity, a formula of absolute work capacity is suggested. The proposed procedure may be used to study the working capacity of animals exposed to unfavorable factors of radiation or nonradiation nature

  20. Working time, health and safety a research synthesis paper

    OpenAIRE

    Tucker, Philip; Folkard, Simon

    2012-01-01

    Outlines contemporary trends, developments and effects with regard to different aspects of working time, such as hours of work and work schedules. Examines the impact of modern working time arrangements on workers' health, well-being and workplace safety. Argues that while long daily hours tend to be associated with acute effects of fatigue, long weekly hours tend to be associated both with acute effects of fatigue as well as chronic fatigue, generating long-term negative health effects. Look...

  1. Development of a training simulator to operators of the IEA-R1 research reactor

    International Nuclear Information System (INIS)

    Carvalho, Ricardo Pinto de

    2006-01-01

    This work reports the development of a Simulator for the IEA-R1 Research Reactor. The Simulator was developed with Visual C++ in two stages: construction of the mathematics models and development and configuration of graphics interfaces in a Windows XP executable. A simplified modeling was used for main physics phenomena, using a point kinetics model for the nuclear process and the energy and mass conservation laws in the average channel of the reactor for the thermal hydraulic process. The dynamics differential equations were solved by using finite differences through the 4th order Runge- Kutta method. The reactivity control, reactor cooling, and reactor protection systems were also modeled. The process variables are stored in ASCII files. The Simulator allows navigating by screens of the systems and monitoring tendencies of the operational transients, being an interactive tool for teaching and training of IEA-R1 operators. It also can be used by students, professors, and researchers in teaching activities in reactor and thermal hydraulics theory. The Simulator allows simulations of operations of start up, power maneuver, and shut down. (author)

  2. Proposed Development of NASA Glenn Research Center's Aeronautical Network Research Simulator

    Science.gov (United States)

    Nguyen, Thanh C.; Kerczewski, Robert J.; Wargo, Chris A.; Kocin, Michael J.; Garcia, Manuel L.

    2004-01-01

    Accurate knowledge and understanding of data link traffic loads that will have an impact on the underlying communications infrastructure within the National Airspace System (NAS) is of paramount importance for planning, development and fielding of future airborne and ground-based communications systems. Attempting to better understand this impact, NASA Glenn Research Center (GRC), through its contractor Computer Networks & Software, Inc. (CNS, Inc.), has developed an emulation and test facility known as the Virtual Aircraft and Controller (VAC) to study data link interactions and the capacity of the NAS to support Controller Pilot Data Link Communications (CPDLC) traffic. The drawback of the current VAC test bed is that it does not allow the test personnel and researchers to present a real world RF environment to a complex airborne or ground system. Fortunately, the United States Air Force and Navy Avionics Test Commands, through its contractor ViaSat, Inc., have developed the Joint Communications Simulator (JCS) to provide communications band test and simulation capability for the RF spectrum through 18 GHz including Communications, Navigation, and Identification and Surveillance functions. In this paper, we are proposing the development of a new and robust test bed that will leverage on the existing NASA GRC's VAC and the Air Force and Navy Commands JCS systems capabilities and functionalities. The proposed NASA Glenn Research Center's Aeronautical Networks Research Simulator (ANRS) will combine current Air Traffic Control applications and physical RF stimulation into an integrated system capable of emulating data transmission behaviors including propagation delay, physical protocol delay, transmission failure and channel interference. The ANRS will provide a simulation/stimulation tool and test bed environment that allow the researcher to predict the performance of various aeronautical network protocol standards and their associated waveforms under varying

  3. Working research codes into fluid dynamics education: a science gateway approach

    Science.gov (United States)

    Mason, Lachlan; Hetherington, James; O'Reilly, Martin; Yong, May; Jersakova, Radka; Grieve, Stuart; Perez-Suarez, David; Klapaukh, Roman; Craster, Richard V.; Matar, Omar K.

    2017-11-01

    Research codes are effective for illustrating complex concepts in educational fluid dynamics courses, compared to textbook examples, an interactive three-dimensional visualisation can bring a problem to life! Various barriers, however, prevent the adoption of research codes in teaching: codes are typically created for highly-specific `once-off' calculations and, as such, have no user interface and a steep learning curve. Moreover, a code may require access to high-performance computing resources that are not readily available in the classroom. This project allows academics to rapidly work research codes into their teaching via a minimalist `science gateway' framework. The gateway is a simple, yet flexible, web interface allowing students to construct and run simulations, as well as view and share their output. Behind the scenes, the common operations of job configuration, submission, monitoring and post-processing are customisable at the level of shell scripting. In this talk, we demonstrate the creation of an example teaching gateway connected to the Code BLUE fluid dynamics software. Student simulations can be run via a third-party cloud computing provider or a local high-performance cluster. EPSRC, UK, MEMPHIS program Grant (EP/K003976/1), RAEng Research Chair (OKM).

  4. Current Trends in Numerical Simulation for Parallel Engineering Environments New Directions and Work-in-Progress

    International Nuclear Information System (INIS)

    Trinitis, C; Schulz, M

    2006-01-01

    In today's world, the use of parallel programming and architectures is essential for simulating practical problems in engineering and related disciplines. Remarkable progress in CPU architecture, system scalability, and interconnect technology continues to provide new opportunities, as well as new challenges for both system architects and software developers. These trends are paralleled by progress in parallel algorithms, simulation techniques, and software integration from multiple disciplines. ParSim brings together researchers from both application disciplines and computer science and aims at fostering closer cooperation between these fields. Since its successful introduction in 2002, ParSim has established itself as an integral part of the EuroPVM/MPI conference series. In contrast to traditional conferences, emphasis is put on the presentation of up-to-date results with a short turn-around time. This offers a unique opportunity to present new aspects in this dynamic field and discuss them with a wide, interdisciplinary audience. The EuroPVM/MPI conference series, as one of the prime events in parallel computation, serves as an ideal surrounding for ParSim. This combination enables the participants to present and discuss their work within the scope of both the session and the host conference. This year, eleven papers from authors in nine countries were submitted to ParSim, and we selected five of them. They cover a wide range of different application fields including gas flow simulations, thermo-mechanical processes in nuclear waste storage, and cosmological simulations. At the same time, the selected contributions also address the computer science side of their codes and discuss different parallelization strategies, programming models and languages, as well as the use nonblocking collective operations in MPI. We are confident that this provides an attractive program and that ParSim will be an informal setting for lively discussions and for fostering new

  5. The characteristics analysis of torque and rotation speed of working unit of branch grinder - introductory research

    Directory of Open Access Journals (Sweden)

    Warguła Łukasz

    2018-01-01

    Full Text Available Carrying out a realistic research on working units of machines that grinder waste coming from tree and bush trimming requires designing machines that would be more efficient. It is neccesary both to introduce the analysis of already existing solutions as well as searching for innovative ones that would result in the increase of efficiency, lowering the costs and time needed as well as lower exhaust emission into the atmosphere. The results presented below will be used for the following purposes: the analysis of grinding process that supplies data to cunstruct simulating models that reflect the real working conditions of grinding machines. The results of the experiments will allow to estimate the influence of construction featrures, including the ones connected with automatisation. The importance of the carried out research is also applicable to the analisys of influence of grinding process on the form of flakes that result from the process, energy consumption. It also allows to make conclusions leading to the improvement of the processes that use grinded mass.The construction specifity of ths kind of machines and their working principles results from the fact, that the cutting process they perform concerns orthotropic plant material that has inhomogenic structure and physical-chemical properties requires further analysis. The article presents the construcion of a research stand designed to record the characteristisc of changes of the torque and rotation speed of working unit of mill chopper type MQS2800 Macalister. The introductory research results presented below point out that depending on the position of the sample (along the grain against the mill chopper significantly influences on the form of generated changes of the torque. The research stand that has been designed and constructed allows the analysis of both construction features of the chopper as well via the assessment of grinding process also separte paremeters of processed wood.

  6. Case report: a work simulation program for a manual worker with a fracture injury.

    Science.gov (United States)

    Chan, Chi-Chung; Chow, Jonathan H.W.

    2000-01-01

    Work rehabilitation programs targeting different client groups are available in nearly all major hospital occupational therapy departments in Hong Kong. Clients receiving work rehabilitation are referred from various out-patient clinics and other occupational therapists. Those clients experience limitation in work after their injuries or diseases and plan to return to work after rehabilitation. Program objectives are 1) to assist clients to reach maximum work capacity as rapidly as possible 2) to ensure clients return to work safely 3) to improve clients' work readiness. This case report describes an individualized work simulation program at a general hospital in Hong Kong provided for a typical client who is preparing to return to his worker role. Specific job analysis, goals and program rationale for the client are discussed.

  7. Research on application of system of neutron, thermohydraulic and safety analysis codes in order to simulation of the Dalat Nuclear Research Reactor

    International Nuclear Information System (INIS)

    Pham Van Lam; Le Vinh Vinh; Huynh Ton Nghiem

    2004-01-01

    Requirements of neutron, thermohydraulic and safety analysis calculation are very important because of issuing new version of SAR for DNRR, research on construction of new research reactor and nuclear power plant. Research on application of system of neutron, thermohydraulic and safety analysis codes in order to simulation of the Dalat Nuclear Research Reactor has been done in the frame work of research theme in the year 2002-2003. The purposes of the research are maintaining safety operation of the DNRR and enhancement of man power and calculation and safety analysis tool potential. (author)

  8. A framework of knowledge creation processes in participatory simulation of hospital work systems

    DEFF Research Database (Denmark)

    Andersen, Simone Nyholm; Broberg, Ole

    2017-01-01

    Participatory simulation (PS) is a method to involve workers in simulating and designing their own future work system. Existing PS studies have focused on analysing the outcome, and minimal attention has been devoted to the process of creating this outcome. In order to study this process, we...... suggest applying a knowledge creation perspective. The aim of this study was to develop a framework describing the process of how ergonomics knowledge is created in PS. Video recordings from three projects applying PS of hospital work systems constituted the foundation of process mining analysis....... The analysis resulted in a framework revealing the sources of ergonomics knowledge creation as sequential relationships between the activities of simulation participants sharing work experiences; experimenting with scenarios; and reflecting on ergonomics consequences. We argue that this framework reveals...

  9. Research on a simulation-based ship production support system for middle-sized shipbuilding companies

    Directory of Open Access Journals (Sweden)

    Young Joo Song

    2009-12-01

    Full Text Available Today, many middle-sized shipbuilding companies in Korea are experiencing strong competition from shipbuilding companies in other nations. This competition is particularly affecting small- and middle-sized shipyards, rather than the major shipyards that have their own support systems and development capabilities. The acquisition of techniques that would enable maximization of production efficiency and minimization of the gap between planning and execution would increase the competitiveness of small- and middle-sized Korean shipyards. In this paper, research on a simulation-based support system for ship production management, which can be applied to the shipbuilding processes of middle-sized shipbuilding companies, is presented. The simulation research includes layout optimization, load balancing, work stage operation planning, block logistics, and integrated material management. Each item is integrated into a network system with a value chain that includes all shipbuilding processes.

  10. Research on a simulation-based ship production support system for middle-sized shipbuilding companies

    Science.gov (United States)

    Song, Young Joo; Woo, Jong Hun; Shin, Jong Gye

    2009-12-01

    Today, many middle-sized shipbuilding companies in Korea are experiencing strong competition from shipbuilding companies in other nations. This competition is particularly affecting small- and middle-sized shipyards, rather than the major shipyards that have their own support systems and development capabilities. The acquisition of techniques that would enable maximization of production efficiency and minimization of the gap between planning and execution would increase the competitiveness of small- and middle-sized Korean shipyards. In this paper, research on a simulation-based support system for ship production management, which can be applied to the shipbuilding processes of middle-sized shipbuilding companies, is presented. The simulation research includes layout optimization, load balancing, work stage operation planning, block logistics, and integrated material management. Each item is integrated into a network system with a value chain that includes all shipbuilding processes.

  11. Qualitative Research in Palliative Care: Applications to Clinical Trials Work.

    Science.gov (United States)

    Lim, Christopher T; Tadmor, Avia; Fujisawa, Daisuke; MacDonald, James J; Gallagher, Emily R; Eusebio, Justin; Jackson, Vicki A; Temel, Jennifer S; Greer, Joseph A; Hagan, Teresa; Park, Elyse R

    2017-08-01

    While vast opportunities for using qualitative methods exist within palliative care research, few studies provide practical advice for researchers and clinicians as a roadmap to identify and utilize such opportunities. To provide palliative care clinicians and researchers descriptions of qualitative methodology applied to innovative research questions relative to palliative care research and define basic concepts in qualitative research. Body: We describe three qualitative projects as exemplars to describe major concepts in qualitative analysis of early palliative care: (1) a descriptive analysis of clinician documentation in the electronic health record, (2) a thematic content analysis of palliative care clinician focus groups, and (3) a framework analysis of audio-recorded encounters between patients and clinicians as part of a clinical trial. This study provides a foundation for undertaking qualitative research within palliative care and serves as a framework for use by other palliative care researchers interested in qualitative methodologies.

  12. Working with Indigenous Knowledge: A Guide for Researchers ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    In the 1990s, indigenous knowledge has been fertile ground for research, and ... research and will appeal to both seasoned development professional as well as ... indigenous-knowledge issues with the University of Indonesia, the Institute of ...

  13. Invasive Species Working Group: Research Summary and Expertise Directory

    Science.gov (United States)

    Jack Butler; Dean Pearson; Mee-Sook Kim

    2009-01-01

    Rocky Mountain Research Station (RMRS) personnel have scientific expertise in widely ranging disciplines and conduct multidisciplinary research on invasive species issues with emphasis in terrestrial and aquatic habitats throughout the Interior West, Great Plains, and related areas (fig. 1; Expertise Directory; appendix). RMRS invasive species research covers an array...

  14. Current research work at the TRIGA reactor in Ljubljana

    International Nuclear Information System (INIS)

    Najzer, M.; Dimic, V.

    1978-01-01

    The research programmes at this TRIGA reactor cover quite broad and different research fields. They can be grouped in the following topics: reactor dynamics and operation, neutron activation analysis, solid state physics research, reactor dosimetry, radiography and fuel burn-up determination. In this presentation a short overview is given of those investigations which are not described in detail in separate papers

  15. System Dynamics Model and Simulation of Employee Work-Family Conflict in the Construction Industry

    Science.gov (United States)

    Wu, Guangdong; Duan, Kaifeng; Zuo, Jian; Yang, Jianlin; Wen, Shiping

    2016-01-01

    The construction industry is a demanding work environment where employees’ work-family conflict is particularly prominent. This conflict has a significant impact on job and family satisfaction and performance of employees. In order to analyze the dynamic evolution of construction industry employee’s work-family conflict between work and family domains, this paper constructs a bi-directional dynamic model framework of work-family conflict by referring to the relevant literature. Consequently, a system dynamics model of employee’s work-family conflict in the construction industry is established, and a simulation is conducted. The simulation results indicate that construction industry employees experience work interference with family conflict (WIFC) levels which are significantly greater than the family interference with work conflict (FIWC) levels. This study also revealed that improving work flexibility and organizational support can have a positive impact on the satisfaction and performance of construction industry employees from a work and family perspective. Furthermore, improving family support can only significantly improve employee job satisfaction. PMID:27801857

  16. System Dynamics Model and Simulation of Employee Work-Family Conflict in the Construction Industry

    Directory of Open Access Journals (Sweden)

    Guangdong Wu

    2016-10-01

    Full Text Available The construction industry is a demanding work environment where employees’ work-family conflict is particularly prominent. This conflict has a significant impact on job and family satisfaction and performance of employees. In order to analyze the dynamic evolution of construction industry employee’s work-family conflict between work and family domains, this paper constructs a bi-directional dynamic model framework of work-family conflict by referring to the relevant literature. Consequently, a system dynamics model of employee’s work-family conflict in the construction industry is established, and a simulation is conducted. The simulation results indicate that construction industry employees experience work interference with family conflict (WIFC levels which are significantly greater than the family interference with work conflict (FIWC levels. This study also revealed that improving work flexibility and organizational support can have a positive impact on the satisfaction and performance of construction industry employees from a work and family perspective. Furthermore, improving family support can only significantly improve employee job satisfaction.

  17. System Dynamics Model and Simulation of Employee Work-Family Conflict in the Construction Industry.

    Science.gov (United States)

    Wu, Guangdong; Duan, Kaifeng; Zuo, Jian; Yang, Jianlin; Wen, Shiping

    2016-10-28

    The construction industry is a demanding work environment where employees' work-family conflict is particularly prominent. This conflict has a significant impact on job and family satisfaction and performance of employees. In order to analyze the dynamic evolution of construction industry employee's work-family conflict between work and family domains, this paper constructs a bi-directional dynamic model framework of work-family conflict by referring to the relevant literature. Consequently, a system dynamics model of employee's work-family conflict in the construction industry is established, and a simulation is conducted. The simulation results indicate that construction industry employees experience work interference with family conflict (WIFC) levels which are significantly greater than the family interference with work conflict (FIWC) levels. This study also revealed that improving work flexibility and organizational support can have a positive impact on the satisfaction and performance of construction industry employees from a work and family perspective. Furthermore, improving family support can only significantly improve employee job satisfaction.

  18. An innovative exercise method to simulate orbital EVA work - Applications to PLSS automatic controls

    Science.gov (United States)

    Lantz, Renee; Vykukal, H.; Webbon, Bruce

    1987-01-01

    An exercise method has been proposed which may satisfy the current need for a laboratory simulation representative of muscular, cardiovascular, respiratory, and thermoregulatory responses to work during orbital extravehicular activity (EVA). The simulation incorporates arm crank ergometry with a unique body support mechanism that allows all body position stabilization forces to be reacted at the feet. By instituting this exercise method in laboratory experimentation, an advanced portable life support system (PLSS) thermoregulatory control system can be designed to more accurately reflect the specific work requirements of orbital EVA.

  19. Karlsruhe Nuclear Research Center. Progress report on research and development work in 1987

    International Nuclear Information System (INIS)

    1988-01-01

    This summary of R and D work is the scientific annual report to be prepared by the research center in compliance with its statutes. The material is arranged by items of main activities, as given in the overall R and D programme set up for the research center. The various reports prepared by the individual institutes and principal departments are presented under their relevant subject headings. The annual report is intended to demonstrate the progress achieved in the tasks and activities assigned by the R and D programme of the research center, by referring to the purposes and goals stated in the programme, showing the joint or separate efforts and achievements of the institutes. Details and results of activities are found in the scientific-technical publications given in the bibliographical survey, and in the internal primary surveys. The main activities of the research center include the following: Fast Breeder Project (PSB), Nuclear Fusion Project (PKF), Separation Nozzle Project (TDV), and Reprocessing and Waste Treatment Project (PWA), Ultimate Disposal of Radioactive Waste (ELA), Environment and Safety (U and S), Solids and Materials (FM), Nuclear and Particle Physics (KTP), Microtechniques (MT), Materials Handling (HT), Other Research Activities (SF). Organisational aspects and institutes and the list of publications conclude the report. (orig./HK) [de

  20. Karlsruhe Nuclear Research Center, Institute of Materials Research. Progress report on research and development work in 1993

    International Nuclear Information System (INIS)

    1994-03-01

    The Institute consists of three parts IMF I, IMF II and IMF III. The tasks are divided into applied material physics (IMF I), material and structural mechanics (IMF II) and material process technology (IMF III). IMF I works preferably on the development of metallic, non-metallic and compound materials and on questions of the structure and properties of boundary surfaces and surface protection coatings. The main work of IMF II is the reliability of components, failure mechanics and the science of damage. IMF III examines process technology questions in the context of the manufacture of ceramic materials and fusion materials and the design of nuclear components. The Institute works on various main points of the Kernforschungszentrum in its research work, particularly in nuclear fusion, micro-system technique, nuclear safety research, superconductivity and in processes with little harmful substances and waste. Material and strength problems for future fusion reactors and fission reactors, in powerful micro systems and safety-related questions of nuclear technology are examined. Also, research not bound to projects in the field of metallic, ceramic and polymer materials for high stresses is carried out. (orig.) [de

  1. Report on the results of research and development work 1983

    International Nuclear Information System (INIS)

    1984-02-01

    In this annual report the work performed at the named institute is described. This work concerns experiments with fast neutrons, studies of the e + e - interaction at PETRA, and the development of the spallation neutron source of the Rutherford Laboratory. Furthermore a list at publications is added. (HSI) [de

  2. Work zone performance monitoring application development, research summary.

    Science.gov (United States)

    2016-10-01

    In 2004, the Federal Highway Administration (FHWA) updated the work zone regulations to encourage the collection and use of work zone safety and mobility data (23 CFR 630 Subpart J). The new rule essentially requires agencies to use data to generate ...

  3. Work and organisation engagement : Aligning research and practice

    NARCIS (Netherlands)

    Farndale, E.; Beijer, S.E.; van Veldhoven, M.J.P.M.; Kelliher, C.; Hope Hailey, V.

    2014-01-01

    Purpose To date, work engagement has been the domain of academics whilst organisation engagement has been the focus of practice. The purpose of this paper is to address the growing divide by exploring the construct clarity and discriminant validity of work and organisation engagement simultaneously,

  4. Flexible Work Styles in the Corporate Research Center.

    Science.gov (United States)

    Baker, Katherine

    2000-01-01

    Explores the appropriateness for flexible work schedules for corporate librarians and provides insight into the benefits of flexible work arrangements in other industries. Highlights include technological changes that have changed roles and made resources available electronically; telecommuters; job sharing; and the effects of flexible…

  5. DEPSCOR: Research on ARL's Intelligent Control Architecture: Hierarchical Hybrid-Model Based Design, Verification, Simulation, and Synthesis of Mission Control for Autonomous Underwater Vehicles

    National Research Council Canada - National Science Library

    Kumar, Ratnesh; Holloway, Lawrence E

    2007-01-01

    ... modeling, verification, simulation and automated synthesis of coordinators has lead to research in this area. We have worked and are working on these issues with Applied Research Laboratory (ARL) at Pennsylvania State University (PSU) who have designed autonomous underwater vehicles for over 50 years primarily under the support of the U.S. Navy through the Office of Naval Research (ONR).

  6. Simulations, Imaging, and Modeling: A Unique Theme for an Undergraduate Research Program in Biomechanics.

    Science.gov (United States)

    George, Stephanie M; Domire, Zachary J

    2017-07-01

    As the reliance on computational models to inform experiments and evaluate medical devices grows, the demand for students with modeling experience will grow. In this paper, we report on the 3-yr experience of a National Science Foundation (NSF) funded Research Experiences for Undergraduates (REU) based on the theme simulations, imaging, and modeling in biomechanics. While directly applicable to REU sites, our findings also apply to those creating other types of summer undergraduate research programs. The objective of the paper is to examine if a theme of simulations, imaging, and modeling will improve students' understanding of the important topic of modeling, provide an overall positive research experience, and provide an interdisciplinary experience. The structure of the program and the evaluation plan are described. We report on the results from 25 students over three summers from 2014 to 2016. Overall, students reported significant gains in the knowledge of modeling, research process, and graduate school based on self-reported mastery levels and open-ended qualitative responses. This theme provides students with a skill set that is adaptable to other applications illustrating the interdisciplinary nature of modeling in biomechanics. Another advantage is that students may also be able to continue working on their project following the summer experience through network connections. In conclusion, we have described the successful implementation of the theme simulation, imaging, and modeling for an REU site and the overall positive response of the student participants.

  7. A framework of knowledge creation processes in participatory simulation of hospital work systems.

    Science.gov (United States)

    Andersen, Simone Nyholm; Broberg, Ole

    2017-04-01

    Participatory simulation (PS) is a method to involve workers in simulating and designing their own future work system. Existing PS studies have focused on analysing the outcome, and minimal attention has been devoted to the process of creating this outcome. In order to study this process, we suggest applying a knowledge creation perspective. The aim of this study was to develop a framework describing the process of how ergonomics knowledge is created in PS. Video recordings from three projects applying PS of hospital work systems constituted the foundation of process mining analysis. The analysis resulted in a framework revealing the sources of ergonomics knowledge creation as sequential relationships between the activities of simulation participants sharing work experiences; experimenting with scenarios; and reflecting on ergonomics consequences. We argue that this framework reveals the hidden steps of PS that are essential when planning and facilitating PS that aims at designing work systems. Practitioner Summary: When facilitating participatory simulation (PS) in work system design, achieving an understanding of the PS process is essential. By applying a knowledge creation perspective and process mining, we investigated the knowledge-creating activities constituting the PS process. The analysis resulted in a framework of the knowledge-creating process in PS.

  8. A Sex Work Research Symposium: Examining Positionality in Documenting Sex Work and Sex Workers’ Rights

    OpenAIRE

    Megan Lowthers; Magdalena Sabat; Elya M. Durisin; Kamala Kempadoo

    2017-01-01

    Historically, academic literature on sex work has documented the changing debates, policies, and cultural discourse surrounding the sex industry, and their impact on the rights of sex workers worldwide. As sex work scholars look to the future of sex workers’ rights, however, we are also in a critical moment of self-reflection on how sex work scholarship engages with sex worker communities, produces knowledge surrounding sex work, and represents the lived experiences of sex workers’ rights, or...

  9. Kinematic and Dynamic Simulation Analysis of Hydraulic Excavator’s Working Equipment based on ADAMS

    Directory of Open Access Journals (Sweden)

    Yu Hong Yan

    2016-01-01

    Full Text Available This paper establishes the 3D excavator model according to the actual size in UG firstly. Then based on the virtual simulation software ADAMS, the virtual prototype of the working device is built by adding interrelated constraints(kinematic pair and hydraulic cylinder driving function and load secondly. This paper gets the main parameters of the excavator working scope and the pressure situation change curves of point of each hydraulic cylinder by making kinematic and dynamic simulation analysis of hydraulic excavator’s working equipment at last. The conclusion providing design theory and improvement for the excavator’s working device, which also play an important role in improving the level of China’s excavator design, enhancing excavator’s performance and promoting the rapid development of excavator industry.

  10. Dismounted Infantry Visualization Research: The Dismounted Infantry Simulation (DISim)

    National Research Council Canada - National Science Library

    Thomas, Mark

    2002-01-01

    .... Targeted to the simulation needs of the ground warfighter, the algorithms developed using the DISim test-bed are high-resolution real-time effects for simulation, training, and mission rehearsal. C++...

  11. Evaluation of control rod motion simulator research reactors

    International Nuclear Information System (INIS)

    Sanda

    2010-01-01

    Motion simulator has been carried out testing of the reactor control rod using a servomotor. Reactor control rod motion at any point should be in the right position, one of the motors that can move in a precise and correct the servo motor. To ensure that the servo motor to move in accordance with the desired program, then the servomotor function test for motor work to ensure the performance of the appliance. Tests carried out on meshes stress disorder, the load is stable within a certain period and travel time safety control rod up and down, travel time regulating control rods up and down and travel time compensation control rods up and down. In testing the breakdown voltage Vout nets at 24 V, 6.5 A with 12 Ω load deviation obtained V0 = V1 = 0.1% and 0.65% and for the stability of the load in a certain time deviation V = 0.7125%, next to the breakdown voltage Vout nets at 12V, 4.2 A with a 6 Ω load deviation obtained V0 = V1 = 0.275% and 1.158% for the stability of the load in a certain time deviation V = 1.463% and the net-voltage noise nets on Vout 24 V, 4.5 A with 12 Ω load deviation obtained V0 = V1 = 0.196% and 0.496% and for the stability of the load in a certain time deviation V = 0.3625%. While the travel time of a safety control rod up and down, up and down the regulator and compensation rise and fall showed a steady linear graph. The results show that the performance of the servo motor is very stable with the working area below the tolerance limit, it is 5% - 10%. (author)

  12. Research and development work on NAA at RCD, BARC

    International Nuclear Information System (INIS)

    Acharya, R.; Nair, A.G.C.; Burte, P.P.; Sudarshan, K.; Pandey, A.K.; Scindia, Y.M.; Goswami, A.; Reddy, A.V.R.; Manohar, S.B.

    2006-01-01

    Radiochemistry Division is engaged in R and D using NAA. They have standardized single comparator method of NAA called k 0 -based NAA using different irradiation sites of reactors at BARC Trombay. In addition, methodologies for large sample analysis, internal mono standard NAA and chemical NAA namely radiochemical, derivative and speciation NAA have been developed and are being used in different R and D works. The work on k 0 NAA and chemical NAA carried out till date are described in brief

  13. Development and validation of a digital work simulation to predict workplace deviance

    NARCIS (Netherlands)

    Dubbelt, L.; Oostrom, J.K.; drs. Hiemstra, A.M.F.; Modderman, J.P.L.

    2015-01-01

    ”This paper describes a new and innovative measure that is developed to predict workplace deviance through the measurement of Machiavellianism and Compliant Behavior. Two field studies were conducted to study the validity of the digital work simulation. In Study 1, (N = 113) support was found for

  14. Validation of a digital work simulation to assess Macchiavellianism and compliant behavior

    NARCIS (Netherlands)

    Dubbelt, L.; Oostrom, J.K.; Hiemstra, A.M.; Modderman, J.P.L.

    ”This paper describes a new and innovative measure that is developed to predict workplace deviance through the measurement of Machiavellianism and Compliant Behavior. Two field studies were conducted to study the validity of the digital work simulation. In Study 1, (N = 113) support was found for

  15. Modeling and Simulation of PMSG Wind Turbine with Boost Converter Working under Discontinuous Conduction Mode

    DEFF Research Database (Denmark)

    Qin, Nan; Xu, Zhao

    2008-01-01

    in the discontinuous conducting mode (DCM). The new wind turbine model with the variable speed control of the PMSG based on duty cycle control of the boost converter has been developed in Matlab Simulink. Simulation studies show that DCM working mode of the boost converter provides more flexibility in controlling...

  16. Simulating Disabilities as a Tool for Altering Individual Perceptions of Working with Children with Special Needs

    Science.gov (United States)

    Colwell, Cynthia M.

    2013-01-01

    The purpose of this study was to examine the impact of disability simulations on the attitudes of individuals who will be working with children with special needs in music settings and to compare these attitudes between student music therapists and pre-service music educators. Each participant completed a questionnaire on the first day of class…

  17. Dual Arm Work Package performance estimates and telerobot task network simulation

    International Nuclear Information System (INIS)

    Draper, J.V.

    1997-01-01

    This paper describes the methodology and results of a network simulation study of the Dual Arm Work Package (DAWP), to be employed for dismantling the Argonne National Laboratory CP-5 reactor. The development of the simulation model was based upon the results of a task analysis for the same system. This study was performed by the Oak Ridge National Laboratory (ORNL), in the Robotics and Process Systems Division. Funding was provided the US Department of Energy's Office of Technology Development, Robotics Technology Development Program (RTDP). The RTDP is developing methods of computer simulation to estimate telerobotic system performance. Data were collected to provide point estimates to be used in a task network simulation model. Three skilled operators performed six repetitions of a pipe cutting task representative of typical teleoperation cutting operations

  18. 75 FR 57520 - NASA Advisory Council; Planetary Science Subcommittee; Supporting Research and Technology Working...

    Science.gov (United States)

    2010-09-21

    ... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (10-112)] NASA Advisory Council; Planetary Science Subcommittee; Supporting Research and Technology Working Group; Meeting AGENCY: National... announces a meeting of the Supporting Research and Technology Working Group of the Planetary Science...

  19. ASPIRE: Teachers and researchers working together to enhance student learning

    Directory of Open Access Journals (Sweden)

    Lollie Garay

    2014-11-01

    Full Text Available Abstract Science, Technology, Engineering, and Math (STEM disciplines have become key focus areas in the education community of the United States. Newly adopted across the nation, Next Generation Science Standards require that educators embrace innovative approaches to teaching. Transforming classrooms to actively engage students through a combination of knowledge and practice develops conceptual understanding and application skills. The partnerships between researchers and educators during the Amundsen Sea Polynya International Research Expedition (ASPIRE offer an example of how academic research can enhance K-12 student learning. In this commentary, we illustrate how ASPIRE teacher–scientist partnerships helped engage students with actual and virtual authentic scientific investigations. Crosscutting concepts of research in polar marine science can serve as intellectual tools to connect important ideas about ocean and climate science for the public good.

  20. Scientific works of research workers of the army health service

    International Nuclear Information System (INIS)

    1994-01-01

    Ten articles about the effects of gamma radiation or neutron radiation on human or animal cells are studied here. Effects of radiation, recoveries, research on radioprotective substances are examined in these articles. (N.C.)

  1. Prevention Research Matters-Communities Working to Improve Physical Activity

    Centers for Disease Control (CDC) Podcasts

    2018-02-15

    We know that children who are physically active every day are less likely to develop chronic diseases as adults, including obesity. Dr. Sandy Slater, a researcher with the University of Illinois, Chicago Prevention Research Center, discusses how a park improvement project in Chicago helped engage communities to improve areas for play and activity.  Created: 2/15/2018 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 2/15/2018.

  2. Globalization and work and social being research professor

    Directory of Open Access Journals (Sweden)

    João dos Reis Silva Junior

    2013-09-01

    Full Text Available This article attempts to analyze the movement of the time dimension in contemporary capitalist society. The existence of humanity in the present and its prerogatives, dreams and desires show the challenge of understanding the perception of a concept of time as a cultural construction of base materialism. These are assumptions for a radical critique of working conditions in the Brazilian Public Higher Education Institution. The globalization of the economy expressed by finance capital redefines the concept of time, accelerating it to the interests of uncontrolled reproduction of capital, imposing evil in everyday educational processes responsible for estrangement growing in the work of teachers.

  3. Joint research and evaluation work in the field of fire

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez, R.; Such, J.M.; Casselman, C. [CEA Cadarache, Institut de Protection et de Surete Nucleaire, Dept. de Recherches en Securite, 13 - Saint Paul Lez Durance (France); Laborde, J.C. [CEA Saclay, Dept. de Prevention et d' Etudes des Accidents, 91 - Gif sur Yvette (France); Bertrand, R.; Blot, M.; Chaussard, M.; Lacoue, J.; Mattei, J.M. [CEA Fontenay-aux-Roses, Dept d' Evaluation de Surete, 92 (France)

    2001-07-01

    In general, any assessment concerning the safety of nuclear facilities is based on acquired scientific knowledge. Nevertheless, some areas related to safety remain still inadequately explored, knowledge in these areas needs to be further developed either through the results obtained from studies or from experimental research. With the aim of achieving an optimal safety level, one of IPSN's main tasks is to highlight these gags in current knowledge and point out to nuclear facility operators the need to fill them. These general considerations are pertinent to the particular field of fire. At IPSN, safety assessment activities and research are carried out side-by-side, thus facilitating the implementation of corresponding research programs. This ability to orient research with respect to safety assessment requirements, the contribution of research scientists to safety assessment or the formulation of safety problems, are today counted among the strong points of IPSN operation. This paper presents also the present main fire risk safety concerns for Nuclear Power Plants and the associated research carried out by IPSN (past, underway and future) to improve the scientific knowledge in the related areas. (authors)

  4. Joint research and evaluation work in the field of fire

    International Nuclear Information System (INIS)

    Gonzalez, R.; Such, J.M.; Casselman, C.; Laborde, J.C.; Bertrand, R.; Blot, M.; Chaussard, M.; Lacoue, J.; Mattei, J.M.

    2001-01-01

    In general, any assessment concerning the safety of nuclear facilities is based on acquired scientific knowledge. Nevertheless, some areas related to safety remain still inadequately explored, knowledge in these areas needs to be further developed either through the results obtained from studies or from experimental research. With the aim of achieving an optimal safety level, one of IPSN's main tasks is to highlight these gags in current knowledge and point out to nuclear facility operators the need to fill them. These general considerations are pertinent to the particular field of fire. At IPSN, safety assessment activities and research are carried out side-by-side, thus facilitating the implementation of corresponding research programs. This ability to orient research with respect to safety assessment requirements, the contribution of research scientists to safety assessment or the formulation of safety problems, are today counted among the strong points of IPSN operation. This paper presents also the present main fire risk safety concerns for Nuclear Power Plants and the associated research carried out by IPSN (past, underway and future) to improve the scientific knowledge in the related areas. (authors)

  5. Capturing complexity in work disability research: application of system dynamics modeling methodology.

    Science.gov (United States)

    Jetha, Arif; Pransky, Glenn; Hettinger, Lawrence J

    2016-01-01

    Work disability (WD) is characterized by variable and occasionally undesirable outcomes. The underlying determinants of WD outcomes include patterns of dynamic relationships among health, personal, organizational and regulatory factors that have been challenging to characterize, and inadequately represented by contemporary WD models. System dynamics modeling (SDM) methodology applies a sociotechnical systems thinking lens to view WD systems as comprising a range of influential factors linked by feedback relationships. SDM can potentially overcome limitations in contemporary WD models by uncovering causal feedback relationships, and conceptualizing dynamic system behaviors. It employs a collaborative and stakeholder-based model building methodology to create a visual depiction of the system as a whole. SDM can also enable researchers to run dynamic simulations to provide evidence of anticipated or unanticipated outcomes that could result from policy and programmatic intervention. SDM may advance rehabilitation research by providing greater insights into the structure and dynamics of WD systems while helping to understand inherent complexity. Challenges related to data availability, determining validity, and the extensive time and technical skill requirements for model building may limit SDM's use in the field and should be considered. Contemporary work disability (WD) models provide limited insight into complexity associated with WD processes. System dynamics modeling (SDM) has the potential to capture complexity through a stakeholder-based approach that generates a simulation model consisting of multiple feedback loops. SDM may enable WD researchers and practitioners to understand the structure and behavior of the WD system as a whole, and inform development of improved strategies to manage straightforward and complex WD cases.

  6. University Research in Support of TREAT Modeling and Simulation, FY 2016

    Energy Technology Data Exchange (ETDEWEB)

    DeHart, Mark David [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-09-01

    Idaho National Laboratory is currently evolving the modeling and simulation (M&S) capability that will enable improved core operation as well as design and analysis of TREAT experiments. This M&S capability primarily uses MAMMOTH, a reactor physics application being developed under the Multi-physics Object Oriented Simulation Environment (MOOSE) framework. MAMMOTH allows the coupling of a number of other MOOSE-based applications. In support of this research, INL is working with four universities to explore advanced solution methods that will complement or augment capabilities in MAMMOTH. This report consists of a collection of year end summaries of research from the universities performed in support of TREAT modeling and simulation. This research was led by Prof. Sedat Goluoglu at the University of Florida, Profs. Jim Morel and Jean Ragusa at Texas A&M University, Profs. Benoit Forget and Kord Smith at Massachusetts Institute of Technology, Prof. Leslie Kerby of Idaho State University and Prof. Barry Ganapol of University of Arizona. A significant number of students were supported at various levels though the projects and, for some, also as interns at INL.

  7. Relationship between Quality of Work Life and Work Alienation: Research on Teachers

    Science.gov (United States)

    Çetinkanat, Ayse Canan; Kösterelioglu, Meltem Akin

    2016-01-01

    The purpose of the study is examined primary school teachers' quality of work life and work alienation perceptions. The sample of the study was composed of teachers (N = 426) employed in Bolu province central and district state primary schools in 2010-2011 academic year. For data collection purposes, "Personal Information Form" was used…

  8. Research on simulated infrared image utility evaluation using deep representation

    Science.gov (United States)

    Zhang, Ruiheng; Mu, Chengpo; Yang, Yu; Xu, Lixin

    2018-01-01

    Infrared (IR) image simulation is an important data source for various target recognition systems. However, whether simulated IR images could be used as training data for classifiers depends on the features of fidelity and authenticity of simulated IR images. For evaluation of IR image features, a deep-representation-based algorithm is proposed. Being different from conventional methods, which usually adopt a priori knowledge or manually designed feature, the proposed method can extract essential features and quantitatively evaluate the utility of simulated IR images. First, for data preparation, we employ our IR image simulation system to generate large amounts of IR images. Then, we present the evaluation model of simulated IR image, for which an end-to-end IR feature extraction and target detection model based on deep convolutional neural network is designed. At last, the experiments illustrate that our proposed method outperforms other verification algorithms in evaluating simulated IR images. Cross-validation, variable proportion mixed data validation, and simulation process contrast experiments are carried out to evaluate the utility and objectivity of the images generated by our simulation system. The optimum mixing ratio between simulated and real data is 0.2≤γ≤0.3, which is an effective data augmentation method for real IR images.

  9. Multiagent Modeling and Simulation in Human-Robot Mission Operations Work System Design

    Science.gov (United States)

    Sierhuis, Maarten; Clancey, William J.; Sims, Michael H.; Shafto, Michael (Technical Monitor)

    2001-01-01

    This paper describes a collaborative multiagent modeling and simulation approach for designing work systems. The Brahms environment is used to model mission operations for a semi-autonomous robot mission to the Moon at the work practice level. It shows the impact of human-decision making on the activities and energy consumption of a robot. A collaborative work systems design methodology is described that allows informal models, created with users and stakeholders, to be used as input to the development of formal computational models.

  10. Dysphoria among Hispanic Working Women: A Research Note.

    Science.gov (United States)

    Napholz, Linda

    1994-01-01

    Five affective and personality instruments were completed by 126 urban Hispanic working women, aged 18-65. Dysphoria was positively related to role conflict and negatively related to masculinity (instrumentality), life satisfaction, and self-esteem (the latter 3 having positive correlations with each other). Educational attainment was negatively…

  11. Employability Skills Assessment: Measuring Work Ethic for Research and Learning

    Science.gov (United States)

    Park, HwaChoon; Hill, Roger B.

    2016-01-01

    The Employability Skills Assessment (ESA) was developed by Hill (1995) to provide an alternative measure of work ethic needed for success in employment. This study tested goodness-of-fit for a model used to interpret ESA results. The model had three factors: interpersonal skills, initiative, and dependability. Confirmatory factor analysis results…

  12. Flexitime under Scrutiny: Research on Work Adjustment and Organizational Performance.

    Science.gov (United States)

    Barad, Cary B.

    1980-01-01

    Reports on an in-house study of flexible working hours conducted by the Social Security Administration. On the basis of the study, management agreed that flextime could be implemented throughout the agency wherever feasible and where employee interest was sufficiently high. (Author/IRT)

  13. What Works: Real Research or a Cherry Picker's Paradise?

    Science.gov (United States)

    Dainton, Sheila

    2006-01-01

    The purpose of this article is to consider the evidence base for some of the proposals in the Education White Paper, Higher Standards: better schools for all. In particular, the article challenges the assertion by the Secretary of State for Education and Skills that the White Paper is based on knowledge of "what works." Using the issue…

  14. The Gender-Differential Impact of Work Values on Prospects in Research Careers

    Science.gov (United States)

    Hüttges, Annett; Fay, Doris

    2015-01-01

    Women are strongly underrepresented at top positions in research, with some research suggesting the postdoctoral career stage is a critical stage for female researchers. Drawing on role congruity theory and social cognitive career theory, we tested the gender-differential impact of work values (extrinsic rewards-oriented work values and work-life…

  15. Joint research and the development of social work practice

    DEFF Research Database (Denmark)

    Wulf-Andersen, Trine Østergaard; Hovland, Wenche

    harm, suicide attempts, drug abuse, and sexual abuse) are involved in a research project – the aim of which is to bring users’ perspectives on their meetings with the Danish welfare system and its professionals into the further development of services. Participants have been involved in life history......, with focus on how they experience the care giving from the Child welfare services. The co-researchers were involved in monthly group discussions, from the early phases of the project, trough data collection, interviews, analysis and writing a publication (book). In two presentations (of approximately 20...

  16. Researcher-participant positioning and the discursive work of categories

    DEFF Research Database (Denmark)

    Ringer, Agnes

    2013-01-01

    This paper reports on methodological experiences from an ethnographic study in psychiatric institutions in Denmark. Drawing on a poststructural framework and newer discussions within qualitative research that view methodological problems as sources of data, the paper analyzes how the challenges...... positions in between. At the same time, it is shown that the patients find ways to resist the objectifying practices of the researcher as well as of the mental health services. The conclusions are discussed against recent attempts within the mental health services to promote a more patient-centered approach...

  17. Toward a Unified Theory of Work: Organizational Simulations and Policy Analyses

    National Research Council Canada - National Science Library

    Vaughan, David

    2002-01-01

    .... The Department of Defense needs an integrated MPT planning and management system. We believe that a unified theory of work is needed to provide a framework and to guide and focus related research and development...

  18. Biological Visualization, Imaging and Simulation(Bio-VIS) at NASA Ames Research Center: Developing New Software and Technology for Astronaut Training and Biology Research in Space

    Science.gov (United States)

    Smith, Jeffrey

    2003-01-01

    (Ascention Inc.) attached to instrumented gloves (Immersion Inc.) which co-locate the user's hands with hand/forearm representations in the virtual workspace. Force-feedback is possible in a work volume defined by a Phantom Desktop device (SensAble inc.). Graphics are written in OpenGL. The system runs on a 2.2 GHz Pentium 4 PC. The prototype VGX provides astronauts and support personnel with a real-time physically-based VE system to simulate basic research tasks both on Earth and in the microgravity of Space. The immersive virtual environment of the VGX also makes it a useful tool for virtual engineering applications including CAD development, procedure design and simulation of human-system systems in a desktop-sized work volume.

  19. RESEARCHES OF WORKING LIFE OF FOAM POLYSTYRENE OF BUILDING APPOINTMENT

    Directory of Open Access Journals (Sweden)

    Guyumdzhjan Perch Pogosovich

    2012-09-01

    Full Text Available Results of experimental researches of physicomechanical properties of foam polystyrene thermal insulation materials are presented in article. The operational resource was defined on materials subject to ageing, action of liquid excited environments and atmospheric impacts. The destructive processes leading to destruction of foam polystyrene are revealed.

  20. Defining Neighborhood Boundaries for Social Measurement: Advancing Social Work Research

    Science.gov (United States)

    Foster, Kirk A.; Hipp, J. Aaron

    2011-01-01

    Much of the current neighborhood-based research uses variables aggregated on administrative boundaries such as zip codes, census tracts, and block groups. However, other methods using current technological advances in geographic sciences may broaden our ability to explore the spatial concentration of neighborhood factors affecting individuals and…

  1. Putting GM technologies to work: public research pipelines in ...

    African Journals Online (AJOL)

    Can public policies and research institutions in African countries provide safe and useful genetically modified (GM) food crops? This is an urgent question, recognizing that advancing GM food crops can be difficult, affected by global debate, and various regulatory protocols. Reaching farmers has been achieved in several ...

  2. Working Life Changes and Training of Older Workers. Research Report.

    Science.gov (United States)

    Tikkanen, Tarja; Lahn, Leif Christian; Withnall, Alexandra; Ward, Peter; Lyng, Kolbein

    WORKTOW was a multidisciplinary action research project carried out in 27 small and medium-sized enterprises in the United Kingdom, Finland, and Norway. The main focus was on the learning of workers aged 45 and older. In-depth case studies were conducted in all three countries involving a range of learning interventions. Results showed age was not…

  3. Work Engagement: A Double-Edged Sword? A Study of the Relationship between Work Engagement and the Work-Home Interaction Using the ARK Research Platform

    Directory of Open Access Journals (Sweden)

    Katrine Listau

    2017-07-01

    Full Text Available The aim of the present study was to investigate how being engaged at work affects academics’ work-home interaction. Using the Conservation of Resources theory as a theoretical framework, the study contributes to existing research by examining the relationship between the work engagement subscales (i.e. vigour, dedication, and absorption and both work-home facilitation and work-home conflict. In order to test the hypotheses, a Partial Least Squares-Structural Equation Modelling analysis was conducted using a large sample of academics from the Norwegian university sector (N = 4378. The results indicated that vigour and dedication had a positive relationship with work-home facilitation and a negative relationship with work-home conflict. In contrast, absorption was not significantly related to work-home facilitation, but was positively associated with work-home conflict. Thus, we conclude that work engagement seems to have the potential to create both positive and negative outcomes.

  4. Rapidly Re-Configurable Flight Simulator Tools for Crew Vehicle Integration Research and Design

    Science.gov (United States)

    Pritchett, Amy R.

    2002-01-01

    While simulation is a valuable research and design tool, the time and difficulty required to create new simulations (or re-use existing simulations) often limits their application. This report describes the design of the software architecture for the Reconfigurable Flight Simulator (RFS), which provides a robust simulation framework that allows the simulator to fulfill multiple research and development goals. The core of the architecture provides the interface standards for simulation components, registers and initializes components, and handles the communication between simulation components. The simulation components are each a pre-compiled library 'plugin' module. This modularity allows independent development and sharing of individual simulation components. Additional interfaces can be provided through the use of Object Data/Method Extensions (OD/ME). RFS provides a programmable run-time environment for real-time access and manipulation, and has networking capabilities using the High Level Architecture (HLA).

  5. Vehicle Technology Simulation and Analysis Tools | Transportation Research

    Science.gov (United States)

    Analysis Tools NREL developed the following modeling, simulation, and analysis tools to investigate novel design goals (e.g., fuel economy versus performance) to find cost-competitive solutions. ADOPT Vehicle Simulator to analyze the performance and fuel economy of conventional and advanced light- and

  6. Panel: The Future of Research in Modeling & Simulation

    Science.gov (United States)

    2014-12-01

    Fomel and Claerbout 2009; Stodden 2010). It refers to the ability to recreate simulation results from existing simulation code and data...379(1): 317-333. 2809 Yilmaz, Taylor, Fujimoto, and Darema Stodden , V. 2010. “The Scientific Method in Practice: Reproducibility in the

  7. Mechanical design of NASA Ames Research Center vertical motion simulator

    Science.gov (United States)

    Engelbert, D. F.; Bakke, A. P.; Chargin, M. K.; Vallotton, W. C.

    1976-01-01

    NASA has designed and is constructing a new flight simulator with large vertical travel. Several aspects of the mechanical design of this Vertical Motion Simulator (VMS) are discussed, including the multiple rack and pinion vertical drive, a pneumatic equilibration system, and the friction-damped rigid link catenaries used as cable supports.

  8. Structured Observation of School Administrator Work Activities: Methodological Limitations and Recommendations for Research, Part II.

    Science.gov (United States)

    Pitner, Nancy J.; Russell, James S.

    1986-01-01

    This paper critically reviews administrator work activity studies which follow the research of Henry Mintzberg. It discusses directions for future research using qualitative and quantitative methods and discourages research that relies solely on Mintzberg's structure. (Author/JAZ)

  9. Research use of the AIDA www.2aida.org diabetes software simulation program: a review--part 2. Generating simulated blood glucose data for prototype validation.

    Science.gov (United States)

    Lehmann, Eldon D

    2003-01-01

    The purpose of this review is to describe research applications of the AIDA diabetes software simulator. AIDA is a computer program that permits the interactive simulation of insulin and glucose profiles for teaching, demonstration, and self-learning purposes. Since March/April 1996 it has been made freely available on the Internet as a noncommercial contribution to continuing diabetes education. Up to May 2003 well over 320,000 visits have been logged at the main AIDA Website--www.2aida.org--and over 65,000 copies of the AIDA program have been downloaded free-of-charge. This review (the second of two parts) overviews research projects and ventures, undertaken for the most part by other research workers in the diabetes computing field, that have made use of the freeware AIDA program. As with Part 1 of the review (Diabetes Technol Ther 2003;5:425-438) relevant research work was identified in three main ways: (i) by personal (e-mail/written) communications from researchers, (ii) via the ISI Web of Science citation database to identify published articles which referred to AIDA-related papers, and (iii) via searches on the Internet. Also, in a number of cases research students who had sought advice about AIDA, and diabetes computing in general, provided copies of their research dissertations/theses upon the completion of their projects. Part 2 of this review highlights some more of the research projects that have made use of the AIDA diabetes simulation program to date. A wide variety of diabetes computing topics are addressed. These range from learning about parameter interactions using simulated blood glucose data, to considerations of dietary assessments, developing new diabetes models, and performance monitoring of closed-loop insulin delivery devices. Other topics include evaluation/validation research usage of such software, applying simulated blood glucose data for prototype training/validation, and other research uses of placing technical information on the Web

  10. ITER and research works on magnetic confinement fusion

    International Nuclear Information System (INIS)

    Jacquinot, J.

    2013-01-01

    This article presents the main features of the ITER tokamak and its implications in terms of research concerning plasma instabilities, confinement and materials. It also shows how the financial and technological responsibilities have been shared between the 7 partners (European Union, China, South-Korea, Russia, Japan, India and United-States) and also gives a progress update of the fabrication of the components at the date of September 2012

  11. International Research on ISS - The Benefits of Working Together

    Science.gov (United States)

    Uri, John J.; Thomas, Donald A.

    2005-01-01

    International Space Station is the most complex multinational cooperative space endeavor in history. Interagency agreements define utilization accommodations and resources available to each partner. Based on these arrangements, the partners select and implement research to meet agency goals and objectives. But to optimize the limited resources available to utilization, cooperation among the partners is essential. This paper describes various avenues available for partner cooperation and provides specific examples to demonstrate the value of such cooperation to accelerate and enhance science return.

  12. Effects of night work, sleep loss and time on task on simulated threat detection performance.

    Science.gov (United States)

    Basner, Mathias; Rubinstein, Joshua; Fomberstein, Kenneth M; Coble, Matthew C; Ecker, Adrian; Avinash, Deepa; Dinges, David F

    2008-09-01

    To investigate the effects of night work and sleep loss on a simulated luggage screening task (SLST) that mimicked the x-ray system used by airport luggage screeners. We developed more than 5,800 unique simulated x-ray images of luggage organized into 31 stimulus sets of 200 bags each. 25% of each set contained either a gun or a knife with low or high target difficulty. The 200-bag stimuli sets were then run on software that simulates an x-ray screening system (SLST). Signal detection analysis was used to obtain measures of hit rate (HR), false alarm rate (FAR), threat detection accuracy (A'), and response bias (B"(D)). Experimental laboratory study 24 healthy nonprofessional volunteers (13 women, mean age +/- SD = 29.9 +/- 6.5 years). Subjects performed the SLST every 2 h during a 5-day period that included a 35 h period of wakefulness that extended to night work and then another day work period after the night without sleep. Threat detection accuracy A' decreased significantly (P work, while both A' (P = 0.001) and HR decreased (P = 0.008) during day work following sleep loss. There were prominent time-on-task effects on response bias B"(D) (P= 0.002) and response latency (P = 0.004), but accuracy A' was unaffected. Both HR and FAR increased significantly with increasing study duration (both P work and sleep loss adversely affect the accuracy of detecting complex real world objects among high levels of background clutter. If the results can be replicated in professional screeners and real work environments, fatigue in luggage screening personnel may pose a threat for air traffic safety unless countermeasures for fatigue are deployed.

  13. Working Papers in Acquisition of Knowledge for Image Understanding Research,

    Science.gov (United States)

    1976-12-15

    Rmvt 112,7,P IM Y. K3p ’Of’ z4-" odK zw Mw; OW, ev 6 "ONO T;I 11; "VI lip, IA wo 44 jo . ... . ...... I I WORKING PAPERS IN ACQUISITION OF...paradigm than any other. They have collected protocolt on subjects verbally describing scenes, after examining them visually. The control variable they... collection of Elements of Control Flow (ECF). To avoid creation of either file, the user presses the return key without typing a name to the respective

  14. Four days of simulated shift work reduces insulin sensitivity in humans.

    Science.gov (United States)

    Bescos, R; Boden, M J; Jackson, M L; Trewin, A J; Marin, E C; Levinger, I; Garnham, A; Hiam, D S; Falcao-Tebas, F; Conte, F; Owens, J A; Kennaway, D J; McConell, G K

    2018-06-01

    The aim of this study was to investigate the effects of 4 consecutive simulated night shifts on glucose homeostasis, mitochondrial function and central and peripheral rhythmicities compared with a simulated day shift schedule. Seventeen healthy adults (8M:9F) matched for sleep, physical activity and dietary/fat intake participated in this study (night shift work n = 9; day shift work n = 8). Glucose tolerance and insulin sensitivity before and after 4 nights of shift work were measured by an intravenous glucose tolerance test and a hyperinsulinaemic euglycaemic clamp respectively. Muscles biopsies were obtained to determine insulin signalling and mitochondrial function. Central and peripheral rhythmicities were assessed by measuring salivary melatonin and expression of circadian genes from hair samples respectively. Fasting plasma glucose increased (4.4 ± 0.1 vs. 4.6 ± 0.1 mmol L -1 ; P = .001) and insulin sensitivity decreased (25 ± 7%, P night shift, with no changes following the day shift. Night shift work had no effect on skeletal muscle protein expression (PGC1α, UCP3, TFAM and mitochondria Complex II-V) or insulin-stimulated pAkt Ser473, pTBC1D4Ser318 and pTBC1D4Thr642. Importantly, the metabolic changes after simulated night shifts occurred despite no changes in the timing of melatonin rhythmicity or hair follicle cell clock gene expression across the wake period (Per3, Per1, Nr1d1 and Nr1d2). Only 4 days of simulated night shift work in healthy adults is sufficient to reduce insulin sensitivity which would be expected to increase the risk of T2D. © 2018 Scandinavian Physiological Society. Published by John Wiley & Sons Ltd.

  15. Quality of the working environment and productivity : research findings and case studies

    NARCIS (Netherlands)

    Greef, M. de; Broek, K. van den; Jongkind, R.; Kenny, L.; Shechtman, O.; Kuhn, K.

    2004-01-01

    The purpose of this working paper, prepared by the Topic Centre on Research - Work and Health of the European Agency for Safety and Health at Work, is to look at the link between a good working environment and productivity. A better understanding of positive effects of a good working environment

  16. Thesis for being entitled to lead research work

    International Nuclear Information System (INIS)

    Muller, F.

    2004-11-01

    The study of the properties of clay minerals such as the di-octahedral phyllosilicates requires a multi-scale analysis of their features. The results that are presented here concern both the local scale (intern structure organisation of the sheet and the cation-sheet interaction) and the semi-local scale featuring the sheet piling up. Various investigation means have been used: X-ray and infra-red absorption, X-ray diffraction, small angle X-ray scattering, electron diffraction on selected spots and adequate simulation methods. The firs part is dedicated to order-disorder relationship in the organization of major octahedral cations (Al, Fe, Mg). The cation distribution is not due to random but is organized in domains that can be mono-cationic (Fe or Al) or mixed, in the latter case the trend is to promote the mixing of charges losses. The second part is devoted to the study of structure transformations induced by thermal and hydro-thermal treatments. Models for the cationic migration inside octahedral layers are proposed to explain structural changes. The composition and cationic distribution of octahedral layers play an important role in the process. In the case of smectite, treatments are responsible for the increase of disorder in the sheet distribution and for the decrease in hydration properties of some sheets

  17. Cost: the missing outcome in simulation-based medical education research: a systematic review.

    Science.gov (United States)

    Zendejas, Benjamin; Wang, Amy T; Brydges, Ryan; Hamstra, Stanley J; Cook, David A

    2013-02-01

    The costs involved with technology-enhanced simulation remain unknown. Appraising the value of simulation-based medical education (SBME) requires complete accounting and reporting of cost. We sought to summarize the quantity and quality of studies that contain an economic analysis of SBME for the training of health professions learners. We performed a systematic search of MEDLINE, EMBASE, CINAHL, ERIC, PsychINFO, Scopus, key journals, and previous review bibliographies through May 2011. Articles reporting original research in any language evaluating the cost of simulation, in comparison with nonstimulation instruction or another simulation intervention, for training practicing and student physicians, nurses, and other health professionals were selected. Reviewers working in duplicate evaluated study quality and abstracted information on learners, instructional design, cost elements, and outcomes. From a pool of 10,903 articles we identified 967 comparative studies. Of these, 59 studies (6.1%) reported any cost elements and 15 (1.6%) provided information on cost compared with another instructional approach. We identified 11 cost components reported, most often the cost of the simulator (n = 42 studies; 71%) and training materials (n = 21; 36%). Ten potential cost components were never reported. The median number of cost components reported per study was 2 (range, 1-9). Only 12 studies (20%) reported cost in the Results section; most reported it in the Discussion (n = 34; 58%). Cost reporting in SBME research is infrequent and incomplete. We propose a comprehensive model for accounting and reporting costs in SBME. Copyright © 2013 Mosby, Inc. All rights reserved.

  18. Exploring the Use of Computer Simulations in Unraveling Research and Development Governance Problems

    Science.gov (United States)

    Balaban, Mariusz A.; Hester, Patrick T.

    2012-01-01

    Understanding Research and Development (R&D) enterprise relationships and processes at a governance level is not a simple task, but valuable decision-making insight and evaluation capabilities can be gained from their exploration through computer simulations. This paper discusses current Modeling and Simulation (M&S) methods, addressing their applicability to R&D enterprise governance. Specifically, the authors analyze advantages and disadvantages of the four methodologies used most often by M&S practitioners: System Dynamics (SO), Discrete Event Simulation (DES), Agent Based Modeling (ABM), and formal Analytic Methods (AM) for modeling systems at the governance level. Moreover, the paper describes nesting models using a multi-method approach. Guidance is provided to those seeking to employ modeling techniques in an R&D enterprise for the purposes of understanding enterprise governance. Further, an example is modeled and explored for potential insight. The paper concludes with recommendations regarding opportunities for concentration of future work in modeling and simulating R&D governance relationships and processes.

  19. The Impact of Heat Exposure and Sleep Restriction on Firefighters' Work Performance and Physiology during Simulated Wildfire Suppression.

    Science.gov (United States)

    Vincent, Grace E; Aisbett, Brad; Larsen, Brianna; Ridgers, Nicola D; Snow, Rod; Ferguson, Sally A

    2017-02-12

    This study was designed to examine the effects of ambient heat on firefighters' physical task performance, and physiological and perceptual responses when sleep restricted during simulated wildfire conditions. Thirty firefighters were randomly allocated to the sleep restricted ( n = 17, SR; 19 °C, 4-h sleep opportunity) or hot and sleep restricted ( n = 13, HOT + SR; 33 °C, 4-h sleep opportunity) condition. Firefighters performed two days of simulated, intermittent, self-paced work circuits comprising six firefighting tasks. Heart rate, and core temperature were measured continuously. After each task, firefighters reported their rating of perceived exertion and thermal sensation. Effort sensation was also reported after each work circuit. Fluids were consumed ad libitum. Urine volume and urine specific gravity were analysed. Sleep was monitored using polysomnography. There were no differences between the SR and HOT + SR groups in firefighters' physiological responses, hydration status, ratings of perceived exertion, motivation, and four of the six firefighting tasks (charged hose advance, rake, hose rolling, static hose hold). Black out hose and lateral repositioning were adversely affected in the HOT + SR group. Working in hot conditions did not appear to consistently impair firefighters work performance, physiology, and perceptual responses. Future research should determine whether such findings remain true when individual tasks are performed over longer durations.

  20. Psychological research in the process of creating artistic works

    Directory of Open Access Journals (Sweden)

    Milićević Nebojša

    2016-01-01

    Full Text Available This text is the review of previous attempt to research creative process in art. Neumann's and Weisberg's classification has been supplemented by the original research by the author of this text. On the example of Picasso's drawing of Guernica it was fulfilled the genesis of this monumental art piece in the light of the theory of aesthetic decision making (Ognjenović, 1980, 1991 and the theory of aesthetic evolution (Martindale, 1990. Based on the evaluation of the students of psychology (N = 32 on the scales of semantic differential, the trends of aesthetic modus in various phases in creating details of the picture (bull head, female had, horse head were analyzed. On the example of bull head details the hypothesis is mainly confirmed. The dimension of harmony (H during the phase of creation shows a soft fall of this detail (F = 3,02, p < 0.05. Decorative, redundant and richness in details (R during phases rapidly grows, while in finishing line falls (F = 13,88, p < 0.01. It is the same with the dimension of distance (D that rises during the period of creation of preliminary sketch bull head (F = 6,74, p < 0.05. Trend arousal potential is beside some oscillations, according with earlier Martindale's findings, shows a slow linear rise (F = 11,12, p < 0.05. Primordial content (PS changes from faze showing alternating oscillatory movement that can be hardly described by more simple regression equation. That is the main point of Picasso's sudden transformation in style of drawing. The results confirm the theoretical hypotheses. Finally, it can be concluded that beside the complexity of creative process, contemporary psychological research explain some of the aspects of creative process.

  1. Does the tipvane work. Overview of 10 years of research

    Energy Technology Data Exchange (ETDEWEB)

    Van Kuik, G.

    1985-08-01

    A survey is given of the research on tipvane wind turbines, done by the Technical University Delft and the National Aerospace Laboratory NLR, Amsterdam. The Betz-Lanchester efficiency limit for wind turbines (66%) can only be surpassed by using tipvanes or shrouds. However shrouds enable a significant increase of power they are too expensive. Aerodynamic profit of windvanes is questionable, due to the induced air resistance. The theory of tipvanes still has some black spots and it is impossible to predict a possible increase of the capacity of a wind turbine as yet, but on the long term their prospects do not look bad. (A.V.)

  2. Sociocultural Behavior Influence Modelling & Assessment: Current Work and Research Frontiers.

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, Michael Lewis [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2018-01-01

    A common problem associated with the effort to better assess potential behaviors of various individuals within different countries is the shear difficulty in comprehending the dynamic nature of populations, particularly over time and considering feedback effects. This paper discusses a theory-based analytical capability designed to enable analysts to better assess the influence of events on individuals interacting within a country or region. These events can include changes in policy, man-made or natural disasters, migration, war, or other changes in environmental/economic conditions. In addition, this paper describes potential extensions of this type of research to enable more timely and accurate assessments.

  3. Education, Work and Crime: Theory and Evidence. Rochester Center for Economic Research Working Paper No. 465.

    Science.gov (United States)

    Lochner, Lance

    A dynamic model of decisions to work, invest in human capital, and commit crime was developed and examined. By making all three activities endogenous, the model explains why older, more intelligent, and more educated workers tend to commit fewer property crimes of some types than others. The model includes the following predictions: (1) policies…

  4. Research of Impact Load in Large Electrohydraulic Load Simulator

    Directory of Open Access Journals (Sweden)

    Yongguang Liu

    2014-01-01

    Full Text Available The stronger impact load will appear in the initial phase when the large electric cylinder is tested in the hardware-in-loop simulation. In this paper, the mathematical model is built based on AMESim, and then the reason of the impact load is investigated through analyzing the changing tendency of parameters in the simulation results. The inhibition methods of impact load are presented according to the structural invariability principle and applied to the actual system. The final experimental result indicates that the impact load is inhibited, which provides a good experimental condition for the electric cylinder and promotes the study of large load simulator.

  5. Representations of work engagement and workaholism in modern psychological research

    Directory of Open Access Journals (Sweden)

    Valentina V. Barabanshchikova

    2015-06-01

    Full Text Available Nowadays athletes in order to achieve high results and achievements should donate their own interests and private life because of spending much more time for countless flights, acclimatization, everyday workout and competition. So they are short of time to fully replenish their psychological and physiological resources, resulting in accumulation of negative human functional states. Without application of any external psychological interventions there is a high probability of occurrence and development of occupational deteriorations in athletes. The main objective of this theoretical research was to identify and analyze the specificity of occupational deteriorations which can develop in sport as a career. In the presented research paper we described the major occupational deteriorations such as burnout (Maslach et al, 2008, workaholism (Schaufeli et al., 2008, perfectionism (Xolmogorova, 2010, type A behaviour (Ryska et al., 1999 and procrastination (Milgram et al., 2000. Accumulation of negative human functional states can entail one or even more occupational deteriorations that will play important role in career termination from sport. Workaholism, burnout, perfectionism, type A Behaviour and procrastination has their own specific manifestations, which can also appear in postretirement from sport activity. The most popular approaches to occupational deteriorations, operationalization and specific features of their appearance and particular manifestations are emphasized, and also various consequences in athlete’s life are described. Thus, occupational deteriorations are one of the most topical and pressed forward issues, which need further development in the framework of conceptualization and inventory development in modern psychology.

  6. The KNOO research consortium: work package 3 - an integrated approach to waste immobilisation and management - 16375

    International Nuclear Information System (INIS)

    Biggs, Simon; Fairweather, Michael; Young, James; Grimes, Robin W.; Milestone, Neil; Livens, Francis

    2009-01-01

    The Keeping the Nuclear Option Open (KNOO) research consortium is a four-year research council funded initiative addressing the challenges related to increasing the safety, reliability and sustainability of nuclear power in the UK. Through collaboration between key industrial and governmental stakeholders, and with international partners, KNOO was established to maintain and develop skills relevant to nuclear power generation. Funded by a research grant of Pounds 6.1 M from the 'Towards a Sustainable Energy Economy Programme' of the UK Research Councils, it represents the single largest university-based nuclear research programme in the UK for more than 30 years. The programme is led by Imperial College London, in collaboration with the universities of Manchester, Sheffield, Leeds, Bristol, Cardiff and the Open University. These universities are working with the UK nuclear industry, who contributed a further Pounds 0.4 M in funding. The industry/government stakeholders include AWE, British Energy, the Department for Environment, Food and Rural Affairs, the Environment Agency, the Health and Safety Executive, Doosan Babcock, the Ministry of Defence, Nirex, AMEC NNC, Rolls-Royce PLC and the UK Atomic Energy Authority. Work Package 3 of this consortium, led by the University of Leeds, concerns 'An Integrated Approach to Waste Immobilisation and Management', and involves Imperial College London, and the Universities of Manchester and Sheffield. The aims of this work package are: to study the re-mobilisation, transport, solid-liquid separation and immobilisation of particulate wastes; to develop predictive models for particle behaviour based on atomic scale, thermodynamic and process scale simulations; to develop a fundamental understanding of selective adsorption of nuclides onto filter systems and their immobilisation; and to consider mechanisms of nuclide leaving and transport. The paper describes highlights from this work in the key areas of multi-scale modeling

  7. Family care work: a policy-relevant research agenda.

    Science.gov (United States)

    Moen, Phyllis; DePasquale, Nicole

    2017-03-01

    This article addresses the need for policy-relevant research agendas on family care in transaction with formal care and public as well as organisational norms and policies in light of the crisis in caregiving for older adults. We propose a combined institutional and life-course theoretical approach, suggesting seven ways of organising scholarly enquiry to promote understanding of the changing nature of family care in the 21st century, inform policymakers' efforts at supporting family caregivers and improve caregivers' and care recipients' quality of life. These include: (1) moving beyond snapshots of individuals; (2) conducting comparative cross-cultural and crosscohort analyses; (3) documenting social heterogeneity, vulnerability and inequality; (4) capturing individuals' and families' adaptive strategies and cycles of control during the caregiving process; (5) investigating policy innovations and natural experiments; (6) assessing third parties as mediating institutions between regulatory environments and caregiving families; and (7) attending to the subjective meanings of care.

  8. Simulation and experimental research on line throwing rocket with flight

    OpenAIRE

    Wen-bin Gu; Ming Lu; Jian-qing Liu; Qin-xing Dong; Zhen-xiong Wang; Jiang-hai Chen

    2014-01-01

    The finite segment method is used to model the line throwing rocket system. A dynamic model of line throwing rocket with flight motion based on Kane's method is presented by the kinematics description of the system and the consideration of the forces acting on the system. The experiment designed according to the parameters of the dynamic model is made. The simulation and experiment results, such as range, velocity and flight time, are compared and analyzed. The simulation results are basicall...

  9. Specification of Training Simulator Fidelity: A Research Plan

    Science.gov (United States)

    1982-02-01

    Knowlede --Dunnette (1976) has recently reviewed the literature in the areas of human skills, abilities, and knowledges. The establishment of what types... management 6. Other than rational user responses to R&D studies and to training simulators 7. Deficiencies in training simulator design 23...proficient at managing the introduction of training innovations by applying those factors that can be controlled to influence acceptance. (p. 19) The

  10. Brushless DC motor speed control strategy of simulation research

    Directory of Open Access Journals (Sweden)

    Xiang Wen

    2017-01-01

    Full Text Available In view of the brushless DC motor speed regulation problem, an ideal control strategy is designed. Through the model and analysis of Brushless DC motor, the mathematical model of the brushless DC motor is obtained. By comparing three control strategies of PID control strategy, fuzzy control strategy and fuzzy PID control strategy, PID controller, fuzzy controller and fuzzy PID controller are designed respectively for simulation test. The simulation results show that the fuzzy PID controller has good control effect.

  11. Simulation research on the process of large scale ship plane segmentation intelligent workshop

    Science.gov (United States)

    Xu, Peng; Liao, Liangchuang; Zhou, Chao; Xue, Rui; Fu, Wei

    2017-04-01

    Large scale ship plane segmentation intelligent workshop is a new thing, and there is no research work in related fields at home and abroad. The mode of production should be transformed by the existing industry 2.0 or part of industry 3.0, also transformed from "human brain analysis and judgment + machine manufacturing" to "machine analysis and judgment + machine manufacturing". In this transforming process, there are a great deal of tasks need to be determined on the aspects of management and technology, such as workshop structure evolution, development of intelligent equipment and changes in business model. Along with them is the reformation of the whole workshop. Process simulation in this project would verify general layout and process flow of large scale ship plane section intelligent workshop, also would analyze intelligent workshop working efficiency, which is significant to the next step of the transformation of plane segmentation intelligent workshop.

  12. Research on hyperspectral dynamic scene and image sequence simulation

    Science.gov (United States)

    Sun, Dandan; Liu, Fang; Gao, Jiaobo; Sun, Kefeng; Hu, Yu; Li, Yu; Xie, Junhu; Zhang, Lei

    2016-10-01

    This paper presents a simulation method of hyperspectral dynamic scene and image sequence for hyperspectral equipment evaluation and target detection algorithm. Because of high spectral resolution, strong band continuity, anti-interference and other advantages, in recent years, hyperspectral imaging technology has been rapidly developed and is widely used in many areas such as optoelectronic target detection, military defense and remote sensing systems. Digital imaging simulation, as a crucial part of hardware in loop simulation, can be applied to testing and evaluation hyperspectral imaging equipment with lower development cost and shorter development period. Meanwhile, visual simulation can produce a lot of original image data under various conditions for hyperspectral image feature extraction and classification algorithm. Based on radiation physic model and material characteristic parameters this paper proposes a generation method of digital scene. By building multiple sensor models under different bands and different bandwidths, hyperspectral scenes in visible, MWIR, LWIR band, with spectral resolution 0.01μm, 0.05μm and 0.1μm have been simulated in this paper. The final dynamic scenes have high real-time and realistic, with frequency up to 100 HZ. By means of saving all the scene gray data in the same viewpoint image sequence is obtained. The analysis results show whether in the infrared band or the visible band, the grayscale variations of simulated hyperspectral images are consistent with the theoretical analysis results.

  13. Dynamic computer simulations of electrophoresis: three decades of active research.

    Science.gov (United States)

    Thormann, Wolfgang; Caslavska, Jitka; Breadmore, Michael C; Mosher, Richard A

    2009-06-01

    Dynamic models for electrophoresis are based upon model equations derived from the transport concepts in solution together with user-inputted conditions. They are able to predict theoretically the movement of ions and are as such the most versatile tool to explore the fundamentals of electrokinetic separations. Since its inception three decades ago, the state of dynamic computer simulation software and its use has progressed significantly and Electrophoresis played a pivotal role in that endeavor as a large proportion of the fundamental and application papers were published in this periodical. Software is available that simulates all basic electrophoretic systems, including moving boundary electrophoresis, zone electrophoresis, ITP, IEF and EKC, and their combinations under almost exactly the same conditions used in the laboratory. This has been employed to show the detailed mechanisms of many of the fundamental phenomena that occur in electrophoretic separations. Dynamic electrophoretic simulations are relevant for separations on any scale and instrumental format, including free-fluid preparative, gel, capillary and chip electrophoresis. This review includes a historical overview, a survey of current simulators, simulation examples and a discussion of the applications and achievements of dynamic simulation.

  14. An Assessment of Intervention Fidelity in Published Social Work Intervention Research Studies

    Science.gov (United States)

    Corley, Nicole A.; Kim, Irang

    2016-01-01

    Objectives: Intervention fidelity is a critical strategy to help advance the usefulness and integrity of social work research. This study assessed the extent to which a selected sample of published social work intervention researchers reported its intervention protocols. Methods: Six core social work journals were reviewed in this analysis. The…

  15. Use of optical microscopes in research work in the field of work safety in mines

    Energy Technology Data Exchange (ETDEWEB)

    Piskorska-Kalisz, Z

    1979-05-01

    Notes that coal dust in mine air is measured by means of optical microscopes. The microscope is part of a dust counter called a konimeter. With the help of optical microscopes dust particles in a sample are counted. The Cawood-Patterson network is inserted in the eyepiece of a microscope. At present konimeters produced by Zeiss Works are used in Poland. In predicting rock burst hazard microscopes (light reflecting system) are used, e.g. Zeiss microscope Ng. With its help microcracks in coal samples are counted. An optical stereoscopic microscope is used for calculating the range of flames during coal dust explosions.

  16. Replication in Interaction and Working Memory Research: Révész (2012) and Goo (2012)

    Science.gov (United States)

    Gass, Susan; Valmori, Lorena

    2015-01-01

    This paper argues for the replication of two studies, both of which consider feedback and working memory. In the first part of this paper, we discuss the role of interaction-based research and working memory research in second language acquisition research. We then describe two studies that have unified these two areas in recent published articles…

  17. To Explore the Research and Development Competence and School-to-Work Transition for Hospitality Students

    Science.gov (United States)

    Ko, Wen-Hwa; Chen, Chieh-Ying

    2017-01-01

    This research focuses on the research and development competence and school-to-work transition on occupation selection for hospitality students with the use of social cognitive career theory. The positive attitude construct is the most identifiable for the research and development competences. For the school-to-work constructs, the most…

  18. What Can Pakeha Learn from Engaging in Kaupapa Maori Educational Research? Working Paper 1

    Science.gov (United States)

    Barnes, Alex

    2013-01-01

    This working paper focuses on how Pakeha have become involved in Maori-determined and controlled educational research, and what issues inhibit and facilitate their work. This paper focuses on the experiences of four Pakeha educational researchers who have been engaged in different forms of kaupapa Maori research since the early 1990s. Placing…

  19. Influences of Creative Personality and Working Environment on the Research Productivity of Business School Faculty

    Science.gov (United States)

    Kim, Kihwan; Choi, Suk Bong

    2017-01-01

    Previous research on creative working environments has focused on business organizations. This study examined the influence of creative personality and creative working environment on the research productivity of business faculty. It was hypothesized that creative personality, family support, colleague support, research resources, and workload…

  20. Science, Social Work, and Intervention Research: The Case of "Critical Time Intervention"

    Science.gov (United States)

    Jenson, Jeffrey M.

    2014-01-01

    Intervention research is an important, yet often neglected, focus of social work scholars and investigators. The purpose of this article is to review significant milestones and recent advances in intervention research. Methodological and analytical developments in intervention research are discussed in the context of science and social work.…

  1. Simulation

    DEFF Research Database (Denmark)

    Gould, Derek A; Chalmers, Nicholas; Johnson, Sheena J

    2012-01-01

    Recognition of the many limitations of traditional apprenticeship training is driving new approaches to learning medical procedural skills. Among simulation technologies and methods available today, computer-based systems are topical and bring the benefits of automated, repeatable, and reliable p...... performance assessments. Human factors research is central to simulator model development that is relevant to real-world imaging-guided interventional tasks and to the credentialing programs in which it would be used....

  2. Research and development at the Marshall Space Flight Center Neutral Buoyancy Simulator

    Science.gov (United States)

    Kulpa, Vygantas P.

    1987-01-01

    The Neutral Buoyancy Simulator (NBS), a facility designed to imitate zero-gravity conditions, was used to test the Experimental Assembly of Structures in Extravehicular Activity (EASE) and the Assembly Concept for Construction of Erectable Space Structures (ACCESS). Neutral Buoyancy Simulator applications and operations; early space structure research; development of the EASE/ACCESS experiments; and improvement of NBS simulation are summarized.

  3. The simulation research for the dynamic performance of integrated PWR

    International Nuclear Information System (INIS)

    Yuan Jiandong; Xia Guoqing; Fu Mingyu

    2005-01-01

    The mathematical model of the reactor core of integrated PWR has been studied and simplified properly. With the lumped parameter method, authors have established the mathematical model of the reactor core, including the neutron dynamic equation, the feedback reactivities model and the thermo-hydraulic model of the reactor. Based on the above equations and models, the incremental transfer functions of the reactor core model have been built. By simulation experimentation, authors have compared the dynamic characteristics of the integrated PWR with the traditional dispersed PWR. The simulation results show that the mathematical models and equations are correct. (authors)

  4. Advance in research on aerosol deposition simulation methods

    International Nuclear Information System (INIS)

    Liu Keyang; Li Jingsong

    2011-01-01

    A comprehensive analysis of the health effects of inhaled toxic aerosols requires exact data on airway deposition. A knowledge of the effect of inhaled drugs is essential to the optimization of aerosol drug delivery. Sophisticated analytical deposition models can be used for the computation of total, regional and generation specific deposition efficiencies. The continuously enhancing computer seem to allow us to study the particle transport and deposition in more and more realistic airway geometries with the help of computational fluid dynamics (CFD) simulation method. In this article, the trends in aerosol deposition models and lung models, and the methods for achievement of deposition simulations are also reviewed. (authors)

  5. Writing Abstracts for MLIS Research Proposals Using Worked Examples: An Innovative Approach to Teaching the Elements of Research Design

    Science.gov (United States)

    Ondrusek, Anita L.; Thiele, Harold E.; Yang, Changwoo

    2014-01-01

    The authors examined abstracts written by graduate students for their research proposals as a requirement for a course in research methods in a distance learning MLIS program. The students learned under three instructional conditions that involved varying levels of access to worked examples created from abstracts representing research in the LIS…

  6. How Work Positions Affect the Research Activity and Information Behaviour of Laboratory Scientists in the Research Lifecycle: Applying Activity Theory

    Science.gov (United States)

    Kwon, Nahyun

    2017-01-01

    Introduction: This study was conducted to investigate the characteristics of research and information activities of laboratory scientists in different work positions throughout a research lifecycle. Activity theory was applied as the conceptual and analytical framework. Method: Taking a qualitative research approach, in-depth interviews and field…

  7. Work Values and Attitudes: A Review of Recent Research and Its Implications.

    Science.gov (United States)

    Alvi, Sabir A.

    1980-01-01

    Work values and attitudes are important in understanding an individual's career choice. The historical development of the concept of work, cross-cultural perspectives on work, and development of work values are discussed in light of recent research on sex and socioeconomic class differences. (JN)

  8. Innovative Ideas on How Work-Family Research Can Have More Impact.

    Science.gov (United States)

    Kossek, Ellen Ernst; Baltes, Boris B; Matthews, Russell A

    2011-09-01

    The commentaries on our focal article agreed with its main premise that work-family research should follow new strategies to improve its practical impact, and made suggestions clustering into three main themes. The first theme built on our suggestion to improve the research focus, terminology, and framing of work-family research. These essays offered additional ideas such as decoupling work-family from work-life research, and examining contextual factors more deeply. The second theme focused on how to better apply the findings from work family research. These commentaries provided social change approaches for making work-family issues more central to key stakeholders and to organizations. The third theme focused on broadening our scope to the societal level. These editorials advocated tactics supporting the development of basic rights of work-life balance within and across nations.

  9. Progressive decrease of melatonin production over consecutive days of simulated night work.

    Science.gov (United States)

    Dumont, Marie; Paquet, Jean

    2014-12-01

    Decreased melatonin production, due to nighttime exposure to light, has been proposed as one of the physiological mechanisms increasing cancer risk in night workers. However, few studies measured melatonin production in night workers, and most of these studies did not measure melatonin over 24 h. One study compared total melatonin production between day and night shifts in rotating night workers and did not find significant differences. However, without baseline measures, it was not possible to exclude that melatonin production was reduced during both day and night work. Here, we used data collected in a simulation study of night work to determine the effect of night work on both nighttime and 24-h melatonin production, during three consecutive days of simulated night work. Thirty-eight healthy subjects (15 men, 23 women; 26.6 ± 4.2 years) participated in a 6-d laboratory study. Circadian phase assessments were made with salivary dim light melatonin onset (DLMO) on the first and last days. Simulated day work (09:00-17:00 h) occurred on the second day, followed by three consecutive days of simulated night work (00:00-08:00 h). Light intensity at eye level was set at 50 lux during both simulated day and night work. The subjects were divided into three matched groups exposed to specific daytime light profiles that produced various degrees of circadian phase delays and phase advances. Melatonin production was estimated with the excretion of urinary 6-sulfatoxymelatonin (aMT6s). For the entire protocol, urine was collected every 2 h, except for the sleep episodes when the interval was 8 h. The aMT6s concentration in each sample was multiplied by the urine volume and then added to obtain total aMT6s excretion during nighttime (00:00-08:00 h) and during each 24-h day (00:00-00:00 h). The results showed that melatonin production progressively decreased over consecutive days of simulated night work, both during nighttime and over the 24 h. This

  10. Research Note--Engaged Scholarship: A Signature Research Methodology for Social Work

    Science.gov (United States)

    Delavega, Elena; Lennon-Dearing, Robin; Neely-Barnes, Susan; Soifer, Steve; Crawford, Cicely

    2017-01-01

    Social work has a rich tradition of engagement. Throughout its history, social work scholars have taken up questions that link knowledge production to its application in practice. Recently, other higher education fields have expressed interest in engagement. Yet, social work scholars have remained relatively silent about what they have to offer…

  11. Highway construction work zone safety performance and improvement in Louisiana : research project capsule.

    Science.gov (United States)

    2016-08-01

    While the number of : crashes in Louisiana : construction work zones : has decreased in recent : years, the total count of : work zone crashes is still : significant, warranting : research into how to reduce : crashes. An assessment : of risk factors...

  12. Work-related reproductive, musculoskeletal and mental disorders among working women--history, current issues and future research directions.

    Science.gov (United States)

    Kishi, Reiko; Kitahara, Teruyo; Masuchi, Ayumi; Kasai, Setsuko

    2002-04-01

    According to the recent changes of working environments and socio-economical conditions, the proportion of working women are increasing in Japan. Characteristics of occupational workload and stress of Japanese working women are consistent with those in many industrialized countries except man-dominant culture. In this review we describe the history, current issues, and future research directions on occupational health of working women, especially focused on reproductive health, work-related musculo-skeletal disorders (WMSDs), and mental disorders. In the reproductive health survey, traditionally main concern was about pregnancy outcomes, then fecundity studies, such as time to pregnancy, became topics recently. Future research will be shifted to outcomes not only during pregnancy but also disorders of hormonal balance and climacterium or health conditions after menopause. WMSDs are reviewed on mainly gender difference and its causative factors. Historically, mental health of working women in Japan has focused on the job stress of nurses. We compare results with a lot of recent researches in Europe and U.S.A., where interaction between occupational stress and family roles were studied. It is not easy to predict the prospective status of female workers in Japan, but social, workplace and familial supports will enhance their health promotion.

  13. Simulation and OR (operations research) in combination for practical optimization

    NARCIS (Netherlands)

    van Dijk, N.; van der Sluis, E.; Haijema, R.; Al-Ibrahim, A.; van der Wal, J.; Kuhl, M.E.; Steiger, N.M.; Armstrong, F.B.; Joines, J.A.

    2005-01-01

    Should we pool capacities or not? This is a question that one can regularly be confronted with in operations and service management. It is a question that necessarily requires a combination of queueing (as OR discipline) and simulation (as evaluative tool) and further steps for optimization. It will

  14. Medical Robotic and Telesurgical Simulation and Education Research

    Science.gov (United States)

    2016-09-01

    they cannot correct or control the 109 variation caused by human input. 110 Medical simulation often looks to the military as a front runner in...more resilient to mistakes made during the learning process. These tools not only allow hands-on practice in a safe environment, but also provide

  15. Research of Simulation in Character Animation Based on Physics Engine

    Directory of Open Access Journals (Sweden)

    Yang Yu

    2017-01-01

    Full Text Available Computer 3D character animation essentially is a product, which is combined with computer graphics and robotics, physics, mathematics, and the arts. It is based on computer hardware and graphics algorithms and related sciences rapidly developed new technologies. At present, the mainstream character animation technology is based on the artificial production of key technologies and capture frames based on the motion capture device technology. 3D character animation is widely used not only in the production of film, animation, and other commercial areas but also in virtual reality, computer-aided education, flight simulation, engineering simulation, military simulation, and other fields. In this paper, we try to study physics based character animation to solve these problems such as poor real-time interaction that appears in the character, low utilization rate, and complex production. The paper deeply studied the kinematics, dynamics technology, and production technology based on the motion data. At the same time, it analyzed ODE, PhysX, Bullet, and other variety of mainstream physics engines and studied OBB hierarchy bounding box tree, AABB hierarchical tree, and other collision detection algorithms. Finally, character animation based on ODE is implemented, which is simulation of the motion and collision process of a tricycle.

  16. How Work-Family Research Can Finally Have an Impact in Organizations.

    Science.gov (United States)

    Kossek, Ellen Ernst; Baltes, Boris B; Matthews, Russell A

    2011-09-01

    Although work-family research has mushroomed over the past several decades, an implementation gap persists in putting work-family research into practice. Because of this, work-family researchers have not made a significant impact in improving the lives of employees relative to the amount of research that has been conducted. The goal of this article is to clarify areas where implementation gaps between work-family research and practice are prevalent, discuss the importance of reducing these gaps, and make the case that both better and different research should be conducted. We recommend several alternative but complementary actions for the work-family researcher: (a) work with organizations to study their policy and practice implementation efforts, (b) focus on the impact of rapid technological advances that are blurring work-family boundaries, (c) conduct research to empower the individual to self-manage the work-family interface, and (d) engage in advocacy and collaborative policy research to change institutional contexts and break down silos. Increased partnerships between industrial-organizational (I-O) psychology practitioners and researchers from many industries and disciplines could break down silos that we see as limiting development of the field.

  17. Computerized Games and Simulations in Computer-Assisted Language Learning: A Meta-Analysis of Research

    Science.gov (United States)

    Peterson, Mark

    2010-01-01

    This article explores research on the use of computerized games and simulations in language education. The author examined the psycholinguistic and sociocultural constructs proposed as a basis for the use of games and simulations in computer-assisted language learning. Research in this area is expanding rapidly. However, to date, few studies have…

  18. Proceedings of joint meeting of the 6th simulation science symposium and the NIFS collaboration research 'large scale computer simulation'

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-03-01

    Joint meeting of the 6th Simulation Science Symposium and the NIFS Collaboration Research 'Large Scale Computer Simulation' was held on December 12-13, 2002 at National Institute for Fusion Science, with the aim of promoting interdisciplinary collaborations in various fields of computer simulations. The present meeting attended by more than 40 people consists of the 11 invited and 22 contributed papers, of which topics were extended not only to fusion science but also to related fields such as astrophysics, earth science, fluid dynamics, molecular dynamics, computer science etc. (author)

  19. Development of a Model Following Control Law for Inflight Simulation and Flight Controls Research

    Science.gov (United States)

    Takahashi, Mark; Fletcher, Jay; Aiken, Edwin W. (Technical Monitor)

    1994-01-01

    quality models that include rotor dynamics in a physically meaningful context must be available. A non-physical accounting of the rotor, such as lumping the effect as a time delay, is not likely to produce the desired results. High order simulation models based on first principals are satisfactory for the initial design phase in order to work out the control law design concept and get an initial set of gains. These models, however, have known deficiencies, which must be resolved in the final control law design. The error in the pitch-roll cross coupling is one notable deficiency that even sophisticated rotorcraft models including complex wake aerodynamics have yet to capture successfully. This error must be accounted for to achieve the desired decoupling. The approach to design the proposed inflight simulation control law is based on using a combination of simulation and identified models. The linear and nonlinear higher order models were used to develop an explicit model following control structure. This structure was developed to accommodate the design of control laws compliant to many of the quantitative requirements in ADS-33C. Furthermore, it also allows for control law research using rotor-state feedback and other design methodologies such as Quantitative Feedback and H-Infinity. Final gain selection will be based on higher order identified models which include rotor degrees of freedom.

  20. Former Glory and Challenges Ahead: The Definition of Working Life Research in Sweden

    Directory of Open Access Journals (Sweden)

    Carin Håkansta

    2014-05-01

    Full Text Available This conceptual paper looks into the definition of “working life research” in Sweden and poses two questions: (1 How has the definition of the concept working life research changed over time? (2 Why has it changed? The paper is based on two studies using two different empirical sources. The first source consists of government documents related to science policy in general and working life research in particular. The second source consists of interviews with Swedish researchers. According to the results of the first study, there has been a gradual decrease in attention to working life research in government science science policy documents since the 1990s. Furthermore, there was a conceptual change in the early 1990s when working life research went from referring to work organization research to a broader definition also including work environment and labor market research. The results from the second study show that work science decreasingly appears in university curricula and in titles of university departments. They also show that currently active researchers, especially the younger ones, tend not to refer to themselves as “work scientists” and “working life researchers.” The author argues that the root cause of the apparent disappearance of the concept working life research has been the influence of neoliberalism, which, since the 1980s–1990s, has affected science policy as well as labor market policy. The effects of policy change on working life research are the loss of its previously so privileged position in the public science system and the weakening of what used to be its most important political ally: the trade unions.

  1. Annual report of the research works with joint-use JAERI facilities for fiscal 1974

    International Nuclear Information System (INIS)

    1975-01-01

    Results of the research works by national universities with JAERI's (Japan Atomic Energy Research Institute) joint-use facilities for fiscal 1974 are described. Facilities are research reactors, Co-60, Linac, etc. Research results are presented in individual summaries, covering radiation damage and solid state physics, activation analysis and nuclear chemistry, irradiation effects, etc. Results of the joint works with JAERI are also presented similarly. (Mori, K.)

  2. Simulated night shift work induces circadian misalignment of the human peripheral blood mononuclear cell transcriptome.

    Science.gov (United States)

    Kervezee, Laura; Cuesta, Marc; Cermakian, Nicolas; Boivin, Diane B

    2018-05-22

    Misalignment of the endogenous circadian timing system leads to disruption of physiological rhythms and may contribute to the development of the deleterious health effects associated with night shift work. However, the molecular underpinnings remain to be elucidated. Here, we investigated the effect of a 4-day simulated night shift work protocol on the circadian regulation of the human transcriptome. Repeated blood samples were collected over two 24-hour measurement periods from eight healthy subjects under highly controlled laboratory conditions before and 4 days after a 10-hour delay of their habitual sleep period. RNA was extracted from peripheral blood mononuclear cells to obtain transcriptomic data. Cosinor analysis revealed a marked reduction of significantly rhythmic transcripts in the night shift condition compared with baseline at group and individual levels. Subsequent analysis using a mixed-effects model selection approach indicated that this decrease is mainly due to dampened rhythms rather than to a complete loss of rhythmicity: 73% of transcripts rhythmically expressed at baseline remained rhythmic during the night shift condition with a similar phase relative to habitual bedtimes, but with lower amplitudes. Functional analysis revealed that key biological processes are affected by the night shift protocol, most notably the natural killer cell-mediated immune response and Jun/AP1 and STAT pathways. These results show that 4 days of simulated night shifts leads to a loss in temporal coordination between the human circadian transcriptome and the external environment and impacts biological processes related to the adverse health effects associated to night shift work.

  3. Documenting the NASA Armstrong Flight Research Center Oblate Earth Simulation Equations of Motion and Integration Algorithm

    Science.gov (United States)

    Clarke, R.; Lintereur, L.; Bahm, C.

    2016-01-01

    A desire for more complete documentation of the National Aeronautics and Space Administration (NASA) Armstrong Flight Research Center (AFRC), Edwards, California legacy code used in the core simulation has led to this e ort to fully document the oblate Earth six-degree-of-freedom equations of motion and integration algorithm. The authors of this report have taken much of the earlier work of the simulation engineering group and used it as a jumping-o point for this report. The largest addition this report makes is that each element of the equations of motion is traced back to first principles and at no point is the reader forced to take an equation on faith alone. There are no discoveries of previously unknown principles contained in this report; this report is a collection and presentation of textbook principles. The value of this report is that those textbook principles are herein documented in standard nomenclature that matches the form of the computer code DERIVC. Previous handwritten notes are much of the backbone of this work, however, in almost every area, derivations are explicitly shown to assure the reader that the equations which make up the oblate Earth version of the computer routine, DERIVC, are correct.

  4. Simulation of peat accumulation: an aid in carbon cycling research

    Energy Technology Data Exchange (ETDEWEB)

    Dierendonck, M.C. van (Amsterdam Univ. (Netherlands). Hugo de Vries Laboratory)

    1992-01-01

    Some preliminary results of a technique used to compare primary production and peat accumulation data mainly from published sources and the results of a peat accumulation simulation model are presented. Emphasis is on differences among micro-sites (hummock, lawn, hollow and pool) and among various Sphagnum species (S. fuscum, S. magellanicum, S. cuspidatum and S. balticum) associated with raised bogs. The primary production of lawns and pools were significantly greater than those of hummocks and hollows. Sphagnum balticum had the highest primary production (mean=339 g/m[sup -]2a[sup -1]) Over 90 % of the primary production of Sphagnum fuscum is accumulated while for the other Sphagnum species, the value is <50 %. The data are used in a simulation model to show the influence of doubling of rainfall on primary production over a 50 year period

  5. Simulation of peat accumulation: an aid in carbon cycling research

    International Nuclear Information System (INIS)

    Dierendonck, M.C. van

    1992-01-01

    Some preliminary results of a technique used to compare primary production and peat accumulation data mainly from published sources and the results of a peat accumulation simulation model are presented. Emphasis is on differences among micro-sites (hummock, lawn, hollow and pool) and among various Sphagnum species (S. fuscum, S. magellanicum, S. cuspidatum and S. balticum) associated with raised bogs. The primary production of lawns and pools were significantly greater than those of hummocks and hollows. Sphagnum balticum had the highest primary production (mean=339 g/m - 2a -1 ) Over 90 % of the primary production of Sphagnum fuscum is accumulated while for the other Sphagnum species, the value is <50 %. The data are used in a simulation model to show the influence of doubling of rainfall on primary production over a 50 year period

  6. Modelling and simulation of complex sociotechnical systems: envisioning and analysing work environments

    Science.gov (United States)

    Hettinger, Lawrence J.; Kirlik, Alex; Goh, Yang Miang; Buckle, Peter

    2015-01-01

    Accurate comprehension and analysis of complex sociotechnical systems is a daunting task. Empirically examining, or simply envisioning the structure and behaviour of such systems challenges traditional analytic and experimental approaches as well as our everyday cognitive capabilities. Computer-based models and simulations afford potentially useful means of accomplishing sociotechnical system design and analysis objectives. From a design perspective, they can provide a basis for a common mental model among stakeholders, thereby facilitating accurate comprehension of factors impacting system performance and potential effects of system modifications. From a research perspective, models and simulations afford the means to study aspects of sociotechnical system design and operation, including the potential impact of modifications to structural and dynamic system properties, in ways not feasible with traditional experimental approaches. This paper describes issues involved in the design and use of such models and simulations and describes a proposed path forward to their development and implementation. Practitioner Summary: The size and complexity of real-world sociotechnical systems can present significant barriers to their design, comprehension and empirical analysis. This article describes the potential advantages of computer-based models and simulations for understanding factors that impact sociotechnical system design and operation, particularly with respect to process and occupational safety. PMID:25761227

  7. Research on facial expression simulation based on depth image

    Science.gov (United States)

    Ding, Sha-sha; Duan, Jin; Zhao, Yi-wu; Xiao, Bo; Wang, Hao

    2017-11-01

    Nowadays, face expression simulation is widely used in film and television special effects, human-computer interaction and many other fields. Facial expression is captured by the device of Kinect camera .The method of AAM algorithm based on statistical information is employed to detect and track faces. The 2D regression algorithm is applied to align the feature points. Among them, facial feature points are detected automatically and 3D cartoon model feature points are signed artificially. The aligned feature points are mapped by keyframe techniques. In order to improve the animation effect, Non-feature points are interpolated based on empirical models. Under the constraint of Bézier curves we finish the mapping and interpolation. Thus the feature points on the cartoon face model can be driven if the facial expression varies. In this way the purpose of cartoon face expression simulation in real-time is came ture. The experiment result shows that the method proposed in this text can accurately simulate the facial expression. Finally, our method is compared with the previous method. Actual data prove that the implementation efficiency is greatly improved by our method.

  8. Gender, Simulation, and Gaming: Research Review and Redirections

    Science.gov (United States)

    Jenson, Jennifer; de Castell, Suzanne

    2010-01-01

    This review of gender and gameplay research over the past three decades documents a set of persistent methodological repetitions that have systematically impeded its progress since the inception of this trajectory of research. The first is, in fact, a refusal to consider gender at all: Conflating gender with sex impedes possibilities to identify…

  9. Conference Report: Quo Vadis Reconstructive Social Work Research? Traditions—State of the Art—Perspectives

    Directory of Open Access Journals (Sweden)

    Ulrike Loch

    2008-01-01

    Full Text Available This conference report gives an overview of the 3rd annual conference of the "Network for Reconstructive Research and Biography" held at the Alice-Salomon-University of Applied Science, Berlin, Germany, on 23rd and 24th March, 2007. The aim of this year's conference was to report on the state of the art of research on social work, the current research situations at various universities in Germany, and the discourse on reconstructive social work within the discipline. This was to serve as a basis for the planned next step regarding the further development of the Network, i.e. intensive exchange, promotion of networking with colleagues and concrete forms of co-operation and strategies designed to further consolidate reconstructive social work in the Federal Republic of Germany. The keynote speakers gave further particulars about the state of the art of social work research, the workshops explored this situation in the areas of international social work practice and research, the teaching of research, junior researchers, research funding and new bachelor and master degree programs in the reconstructive social work. Approximately 40 participants met and provided new trend-setting ideas for qualitative research in social work and for the work and structure of the Network. URN: urn:nbn:de:0114-fqs0801338

  10. Aggregation work at polydisperse micellization: ideal solution and "dressed micelle" models comparing to molecular dynamics simulations.

    Science.gov (United States)

    Burov, S V; Shchekin, A K

    2010-12-28

    General thermodynamic relations for the work of polydisperse micelle formation in the model of ideal solution of molecular aggregates in nonionic surfactant solution and the model of "dressed micelles" in ionic solution have been considered. In particular, the dependence of the aggregation work on the total concentration of nonionic surfactant has been analyzed. The analogous dependence for the work of formation of ionic aggregates has been examined with regard to existence of two variables of a state of an ionic aggregate, the aggregation numbers of surface active ions and counterions. To verify the thermodynamic models, the molecular dynamics simulations of micellization in nonionic and ionic surfactant solutions at two total surfactant concentrations have been performed. It was shown that for nonionic surfactants, even at relatively high total surfactant concentrations, the shape and behavior of the work of polydisperse micelle formation found within the model of the ideal solution at different total surfactant concentrations agrees fairly well with the numerical experiment. For ionic surfactant solutions, the numerical results indicate a strong screening of ionic aggregates by the bound counterions. This fact as well as independence of the coefficient in the law of mass action for ionic aggregates on total surfactant concentration and predictable behavior of the "waterfall" lines of surfaces of the aggregation work upholds the model of "dressed" ionic aggregates.

  11. Controlled patterns of daytime light exposure improve circadian adjustment in simulated night work.

    Science.gov (United States)

    Dumont, Marie; Blais, Hélène; Roy, Joanie; Paquet, Jean

    2009-10-01

    Circadian misalignment between the endogenous circadian signal and the imposed rest-activity cycle is one of the main sources of sleep and health troubles in night shift workers. Timed bright light exposure during night work can reduce circadian misalignment in night workers, but this approach is limited by difficulties in incorporating bright light treatment into most workplaces. Controlled light and dark exposure during the daytime also has a significant impact on circadian phase and could be easier to implement in real-life situations. The authors previously described distinctive light exposure patterns in night nurses with and without circadian adaptation. In the present study, the main features of these patterns were used to design daytime light exposure profiles. Profiles were then tested in a laboratory simulation of night work to evaluate their efficacy in reducing circadian misalignment in night workers. The simulation included 2 day shifts followed by 4 consecutive night shifts (2400-0800 h). Healthy subjects (15 men and 23 women; 20-35 years old) were divided into 3 groups to test 3 daytime light exposure profiles designed to produce respectively a phase delay (delay group, n=12), a phase advance (advance group, n=13), or an unchanged circadian phase (stable group, n=13). In all 3 groups, light intensity was set at 50 lux during the nights of simulated night work. Salivary dim light melatonin onset (DLMO) showed a significant phase advance of 2.3 h (+/-1.3 h) in the advance group and a significant phase delay of 4.1 h (+/-1.3 h) in the delay group. The stable group showed a smaller but significant phase delay of 1.7 h (+/-1.6 h). Urinary 6-sulfatoxymelatonin (aMT6s) acrophases were highly correlated to salivary DLMOs. Urinary aMT6s acrophases were used to track daily phase shifts. They showed that phase shifts occurred rapidly and differed between the 3 groups by the 3rd night of simulated night work. These results show that significant phase shifts can

  12. Progress report on research and development work 1991 of the Department of Hot Chemistry, Karlsruhe Nuclear Research Center

    International Nuclear Information System (INIS)

    1991-03-01

    In the year under review, the Institute of Hot Chemistry (IHCH) was in the midst of a thematic reorientation process. The priority of future chemical-technical work will be in the field of the development of supercriticality processes. The objective of such work consists in seeking new ways for getting rid of resistant chemical pollutants (halogenated organic compounds). The following projects are presented in detail: 1) Waste control in the environment (communal waste management; water and soil; emission-reducing processes; highly polluted soils); 2) Solid state and materials research (chemistry of materials research); basic physical research (neutrino and particle physics); 3) Nuclear waste management (concluding work on reprocessing technology), and 4) Other research projects (Institute-related research). The Annex lists the publications made by the IHCH staff. (BBR) [de

  13. Research and realization of signal simulation on virtual instrument

    Science.gov (United States)

    Zhao, Qi; He, Wenting; Guan, Xiumei

    2010-02-01

    In the engineering project, arbitrary waveform generator controlled by software interface is needed by simulation and test. This article discussed the program using the SCPI (Standard Commands For Programmable Instruments) protocol and the VISA (Virtual Instrument System Architecture) library to control the Agilent signal generator (Agilent N5182A) by instrument communication over the LAN interface. The program can conduct several signal generations such as CW (continuous wave), AM (amplitude modulation), FM (frequency modulation), ΦM (phase modulation), Sweep. As the result, the program system has good operability and portability.

  14. Curtain Antenna Array Simulation Research Based on MATLAB

    Directory of Open Access Journals (Sweden)

    Hongbo LIU

    2014-01-01

    Full Text Available For the radiating capacity of curtain antenna array, this paper constructs a three- line-four-column curtain antenna array using cage antenna as the antenna array element and obtains a normalizing 3D radiation patterns through conducting simulation with MATLAB. Meanwhile, the relationships between the antenna spacing and the largest directivity coefficient, as well as the communication frequency and largest directivity coefficient are analyzed in this paper. It turns out that the max value will generate when the antenna spacing is around 18 m and the best communication effect will be achieved when the communication frequency is about 12.4 MHz.

  15. Challenging Perceptions of Academic Research as Bias Free: Promoting a Social Justice Framework in Social Work Research Methods Courses

    Science.gov (United States)

    Nicotera, Nicole; Walls, N. Eugene

    2010-01-01

    The required research courses in social work education are, perhaps, one of the more difficult content areas in which to infuse direct teaching and knowledge acquisition of multiculturalism. The study presented in this article examines the outcomes of systematically addressing social justice within a required master's level social work research…

  16. Simulation of channel blockage for the IEA-R1 research reactor using RELAP/MOD 3

    International Nuclear Information System (INIS)

    Oliveira, Eduardo C.F. de; Castrillo, Lazara Silveira

    2015-01-01

    Research reactors have great importance in the area of nuclear technology, such as radioisotope production, research in nuclear physics, development of new technologies and staff training for reactor operation. The IEA-R1 is a Brazilian research reactor type pool, located at the IPEN (Instituto de Pesquisas Energeticas e Nucleares). In this work is simulated with computer code RELAP5 / MOD 3.3.2 gamma, the effect caused by partial and complete blockage of a channel in MTR fuel element of the IEA-R1 core, in order to analyzed the thermal hydraulic parameters on adjacent channels. (author)

  17. Simulation of channel blockage for the IEA-R1 research reactor using RELAP/MOD 3

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Eduardo C.F. de; Castrillo, Lazara Silveira, E-mail: ecfoliveira@hotmail.com, E-mail: lazara.castrillo@upe.br [Universidade de Pernambuco (UPE), Recife, PE (Brazil). Escola Politecnica de Pernambuco

    2015-07-01

    Research reactors have great importance in the area of nuclear technology, such as radioisotope production, research in nuclear physics, development of new technologies and staff training for reactor operation. The IEA-R1 is a Brazilian research reactor type pool, located at the IPEN (Instituto de Pesquisas Energeticas e Nucleares). In this work is simulated with computer code RELAP5 / MOD 3.3.2 gamma, the effect caused by partial and complete blockage of a channel in MTR fuel element of the IEA-R1 core, in order to analyzed the thermal hydraulic parameters on adjacent channels. (author)

  18. Research in the Work of New Zealand Teacher Educators: A Cultural-Historical Activity Theory Perspective

    Science.gov (United States)

    Berg, David A. G.; Gunn, Alexandra C.; Hill, Mary F.; Haigh, Mavis

    2016-01-01

    In this article we use cultural-historical activity theory to explore the place of research in the work of New Zealand university-based teacher educators (TEs). We consider how aspirations for a research-informed initial teacher education are served by New Zealand universities' recruitment practices and TEs' actual work. We suggest that TEs value…

  19. 78 FR 37242 - Draft Report and Recommendations Prepared by the Research Committee of the Scientific Working...

    Science.gov (United States)

    2013-06-20

    ... Recommendations Prepared by the Research Committee of the Scientific Working Group on Medicolegal Death... Justice Programs, National Institute of Justice, Scientific Working Group for Medicolegal Death Investigation will make available to the general public a document entitled, ``Research in Forensic Pathology...

  20. Sleep and cognitive function of crewmembers and mission controllers working 24-h shifts during a simulated 105-day spaceflight mission

    Science.gov (United States)

    Barger, Laura K.; Wright, Kenneth P.; Burke, Tina M.; Chinoy, Evan D.; Ronda, Joseph M.; Lockley, Steven W.; Czeisler, Charles A.

    2014-01-01

    The success of long-duration space missions depends on the ability of crewmembers and mission support specialists to be alert and maintain high levels of cognitive function while operating complex, technical equipment. We examined sleep, nocturnal melatonin levels and cognitive function of crewmembers and the sleep and cognitive function of mission controllers who participated in a high-fidelity 105-day simulated spaceflight mission at the Institute of Biomedical Problems (Moscow). Crewmembers were required to perform daily mission duties and work one 24-h extended duration work shift every sixth day. Mission controllers nominally worked 24-h extended duration shifts. Supplemental lighting was provided to crewmembers and mission controllers. Participants' sleep was estimated by wrist-actigraphy recordings. Overall, results show that crewmembers and mission controllers obtained inadequate sleep and exhibited impaired cognitive function, despite countermeasure use, while working extended duration shifts. Crewmembers averaged 7.04±0.92 h (mean±SD) and 6.94±1.08 h (mean±SD) in the two workdays prior to the extended duration shifts, 1.88±0.40 h (mean±SD) during the 24-h work shift, and then slept 10.18±0.96 h (mean±SD) the day after the night shift. Although supplemental light was provided, crewmembers' average nocturnal melatonin levels remained elevated during extended 24-h work shifts. Naps and caffeine use were reported by crewmembers during ˜86% and 45% of extended night work shifts, respectively. Even with reported use of wake-promoting countermeasures, significant impairments in cognitive function were observed. Mission controllers slept 5.63±0.95 h (mean±SD) the night prior to their extended duration work shift. On an average, 89% of night shifts included naps with mission controllers sleeping an average of 3.4±1.0 h (mean±SD) during the 24-h extended duration work shift. Mission controllers also showed impaired cognitive function during extended

  1. Research methods of simulate digital compensators and autonomous control systems

    Directory of Open Access Journals (Sweden)

    V. S. Kudryashov

    2016-01-01

    Full Text Available The peculiarity of the present stage of development of the production is the need to control and regulate a large number of process parameters, the mutual influence on each other that when using single-circuit systems significantly reduces the quality of the transition process, resulting in significant costs of raw materials and energy, reduce the quality of the products. Using a stand-alone digital control system eliminates the correlation of technological parameters, to give the system the desired dynamic and static properties, improve the quality of regulation. However, the complexity of the configuration and implementation of procedures (modeling compensators autonomous systems of this type, associated with the need to perform a significant amount of complex analytic transformation significantly limit the scope of their application. In this regard, the approach based on the decompo sition proposed methods of calculation and simulation (realization, consisting in submitting elements autonomous control part digital control system in a series parallel connection. The above theoretical study carried out in a general way for any dimension systems. The results of computational experiments, obtained during the simulation of the four autonomous control systems, comparative analysis and conclusions on the effectiveness of the use of each of the methods. The results obtained can be used in the development of multi-dimensional process control systems.

  2. CFD simulation research on residential indoor air quality.

    Science.gov (United States)

    Yang, Li; Ye, Miao; He, Bao-Jie

    2014-02-15

    Nowadays people are excessively depending on air conditioning to create a comfortable indoor environment, but it could cause some health problems in a long run. In this paper, wind velocity field, temperature field and air age field in a bedroom with wall-hanging air conditioning running in summer are analyzed by CFD numerical simulation technology. The results show that wall-hanging air conditioning system can undertake indoor heat load and conduct good indoor thermal comfort. In terms of wind velocity, air speed in activity area where people sit and stand is moderate, most of which cannot feel wind flow and meet the summer indoor wind comfort requirement. However, for air quality, there are local areas without ventilation and toxic gases not discharged in time. Therefore it is necessary to take effective measures to improve air quality. Compared with the traditional measurement method, CFD software has many advantages in simulating indoor environment, so it is hopeful for humans to create a more comfortable, healthy living environment by CFD in the future. Copyright © 2013 Elsevier B.V. All rights reserved.

  3. European Working Time Directive and the use of simulators and models in Irish orthopaedics.

    LENUS (Irish Health Repository)

    Egan, C

    2011-09-07

    OBJECTIVE: To report on the perceptions of a group of orthopaedic trainees and trainers on perceived effects of the proposed introduction of European Working Time Directive (EWTD) restrictions into Ireland and on the use of simulators in training orthopaedic skills. METHODS: A structured questionnaire was developed to evaluate the opinions of a group of orthopaedic surgeons and trainees at the annual national orthopaedic conference. RESULTS: There were 44 participants [12 consultants, 32 trainees (15 specialist registrars, 8 registrars, 9 senior house officers)]. Seventy-five percent of participants felt that both the quality of patient care and training would be negatively affected. A higher proportion of consultants than trainees felt that quality of life would be affected. A high proportion of participants (81.8%) had used a simulator or model to learn a surgical skill and 100% would consider using them again. CONCLUSIONS: While we wait for the full introduction of the EWTD hours the perception is that both quality of patient care and training will be affected. Models and simulators are well perceived as a method of training.

  4. European Working Time Directive and the use of simulators and models in Irish orthopaedics.

    Science.gov (United States)

    Egan, C; Elliott, R; Fleming, P

    2012-03-01

    To report on the perceptions of a group of orthopaedic trainees and trainers on perceived effects of the proposed introduction of European Working Time Directive (EWTD) restrictions into Ireland and on the use of simulators in training orthopaedic skills. A structured questionnaire was developed to evaluate the opinions of a group of orthopaedic surgeons and trainees at the annual national orthopaedic conference. There were 44 participants [12 consultants, 32 trainees (15 specialist registrars, 8 registrars, 9 senior house officers)]. Seventy-five percent of participants felt that both the quality of patient care and training would be negatively affected. A higher proportion of consultants than trainees felt that quality of life would be affected. A high proportion of participants (81.8%) had used a simulator or model to learn a surgical skill and 100% would consider using them again. While we wait for the full introduction of the EWTD hours the perception is that both quality of patient care and training will be affected. Models and simulators are well perceived as a method of training.

  5. Missing Data Approaches in eHealth Research: Simulation Study and a Tutorial for Nonmathematically Inclined Researchers

    NARCIS (Netherlands)

    Blankers, Matthijs; Koeter, Maarten W. J.; Schippers, Gerard M.

    2010-01-01

    Background: Missing data is a common nuisance in eHealth research: it is hard to prevent and may invalidate research findings. Objective: In this paper several statistical approaches to data "missingness" are discussed and tested in a simulation study. Basic approaches (complete case analysis, mean

  6. Integrating Social Neuroscience and Social Work: Innovations for Advancing Practice-Based Research

    Science.gov (United States)

    Matto, Holly C.; Strolin-Goltzman, Jessica

    2010-01-01

    Throughout the social work profession, there is ongoing interest in building a social science agenda that can address the complex practice-based questions faced by social work professionals today. Methodological innovations and unique funding opportunities have already significantly advanced research on social work practice. Still, there is…

  7. Trends of Empirical Research in South Korean Mental Health Social Work

    Science.gov (United States)

    Song, In Han; Lee, Eun Jung

    2017-01-01

    Since the introduction of evidence-based practice in South Korea, it has gained significant attention for its potential to promote the efficacy of social work services and to integrate knowledge and practice in mental health social work. In order to see how empirical research in South Korean mental health social work has changed, we examined…

  8. Research on Social Work Practice in Egypt and the Arab World

    Science.gov (United States)

    Megahead, Hamido A.

    2017-01-01

    This article aims at introducing the research on social work practice in Egypt and the Arab World as a thematic topic. It has started with the essence of the current Arab World and its definition. Social work practice and models of social work intervention in this specific region have been described in terms of its specific and topographic nature.…

  9. Collaborative Action Research in the Context of Developmental Work Research: A Methodological Approach for Science Teachers' Professional Development

    Science.gov (United States)

    Piliouras, Panagiotis; Lathouris, Dimitris; Plakitsi, Katerina; Stylianou, Liana

    2015-01-01

    The paper refers to the theoretical establishment and brief presentation of collaborative action research with the characteristics of "developmental work research" as an effective methodological approach so that science teachers develop themselves professionally. A specific case study is presented, in which we aimed to transform the…

  10. Absorption Refrigeration Cycles with Ammonia-Ionic Liquid Working Pairs Studied by Molecular Simulation.

    Science.gov (United States)

    Becker, Tim M; Wang, Meng; Kabra, Abhishek; Jamali, Seyed Hossein; Ramdin, Mahinder; Dubbeldam, David; Infante Ferreira, Carlos A; Vlugt, Thijs J H

    2018-04-18

    For absorption refrigeration, it has been shown that ionic liquids have the potential to replace conventional working pairs. Due to the huge number of possibilities, conducting lab experiments to find the optimal ionic liquid is infeasible. Here, we provide a proof-of-principle study of an alternative computational approach. The required thermodynamic properties, i.e., solubility, heat capacity, and heat of absorption, are determined via molecular simulations. These properties are used in a model of the absorption refrigeration cycle to estimate the circulation ratio and the coefficient of performance. We selected two ionic liquids as absorbents: [emim][Tf 2 N], and [emim][SCN]. As refrigerant NH 3 was chosen due to its favorable operating range. The results are compared to the traditional approach in which parameters of a thermodynamic model are fitted to reproduce experimental data. The work shows that simulations can be used to predict the required thermodynamic properties to estimate the performance of absorption refrigeration cycles. However, high-quality force fields are required to accurately predict the cycle performance.

  11. Absorption Refrigeration Cycles with Ammonia–Ionic Liquid Working Pairs Studied by Molecular Simulation

    Science.gov (United States)

    2018-01-01

    For absorption refrigeration, it has been shown that ionic liquids have the potential to replace conventional working pairs. Due to the huge number of possibilities, conducting lab experiments to find the optimal ionic liquid is infeasible. Here, we provide a proof-of-principle study of an alternative computational approach. The required thermodynamic properties, i.e., solubility, heat capacity, and heat of absorption, are determined via molecular simulations. These properties are used in a model of the absorption refrigeration cycle to estimate the circulation ratio and the coefficient of performance. We selected two ionic liquids as absorbents: [emim][Tf2N], and [emim][SCN]. As refrigerant NH3 was chosen due to its favorable operating range. The results are compared to the traditional approach in which parameters of a thermodynamic model are fitted to reproduce experimental data. The work shows that simulations can be used to predict the required thermodynamic properties to estimate the performance of absorption refrigeration cycles. However, high-quality force fields are required to accurately predict the cycle performance. PMID:29749996

  12. Ethnicity and stress at work: a Literature review and suggestions for future research

    OpenAIRE

    Capasso, Roberto; Zurlo, Maria Clelia; Smith, Andrew Paul

    2016-01-01

    Aims: Ethnicity and culture represent a novel topic in the literature on stress and wellbeing at work because there has not been enough consideration of them in studies of work stress. This paper aims to present a critical review and evaluate recent articles investigating ethnicity in the literature on stress and wellbeing at work to identify limitations of previous research concerning all the aspects related to the cultural dimensions in this research area.\\ud \\ud Methodology: Pubmed, PsycIn...

  13. Simulated shift work in rats perturbs multiscale regulation of locomotor activity

    Science.gov (United States)

    Hsieh, Wan-Hsin; Escobar, Carolina; Yugay, Tatiana; Lo, Men-Tzung; Pittman-Polletta, Benjamin; Salgado-Delgado, Roberto; Scheer, Frank A. J. L.; Shea, Steven A.; Buijs, Ruud M.; Hu, Kun

    2014-01-01

    Motor activity possesses a multiscale regulation that is characterized by fractal activity fluctuations with similar structure across a wide range of timescales spanning minutes to hours. Fractal activity patterns are disturbed in animals after ablating the master circadian pacemaker (suprachiasmatic nucleus, SCN) and in humans with SCN dysfunction as occurs with aging and in dementia, suggesting the crucial role of the circadian system in the multiscale activity regulation. We hypothesized that the normal synchronization between behavioural cycles and the SCN-generated circadian rhythms is required for multiscale activity regulation. To test the hypothesis, we studied activity fluctuations of rats in a simulated shift work protocol that was designed to force animals to be active during the habitual resting phase of the circadian/daily cycle. We found that these animals had gradually decreased mean activity level and reduced 24-h activity rhythm amplitude, indicating disturbed circadian and behavioural cycles. Moreover, these animals had disrupted fractal activity patterns as characterized by more random activity fluctuations at multiple timescales from 4 to 12 h. Intriguingly, these activity disturbances exacerbated when the shift work schedule lasted longer and persisted even in the normal days (without forced activity) following the shift work. The disrupted circadian and fractal patterns resemble those of SCN-lesioned animals and of human patients with dementia, suggesting a detrimental impact of shift work on multiscale activity regulation. PMID:24829282

  14. Work Practice Simulation of Complex Human-Automation Systems in Safety Critical Situations: The Brahms Generalized berlingen Model

    Science.gov (United States)

    Clancey, William J.; Linde, Charlotte; Seah, Chin; Shafto, Michael

    2013-01-01

    The transition from the current air traffic system to the next generation air traffic system will require the introduction of new automated systems, including transferring some functions from air traffic controllers to on­-board automation. This report describes a new design verification and validation (V&V) methodology for assessing aviation safety. The approach involves a detailed computer simulation of work practices that includes people interacting with flight-critical systems. The research is part of an effort to develop new modeling and verification methodologies that can assess the safety of flight-critical systems, system configurations, and operational concepts. The 2002 Ueberlingen mid-air collision was chosen for analysis and modeling because one of the main causes of the accident was one crew's response to a conflict between the instructions of the air traffic controller and the instructions of TCAS, an automated Traffic Alert and Collision Avoidance System on-board warning system. It thus furnishes an example of the problem of authority versus autonomy. It provides a starting point for exploring authority/autonomy conflict in the larger system of organization, tools, and practices in which the participants' moment-by-moment actions take place. We have developed a general air traffic system model (not a specific simulation of Überlingen events), called the Brahms Generalized Ueberlingen Model (Brahms-GUeM). Brahms is a multi-agent simulation system that models people, tools, facilities/vehicles, and geography to simulate the current air transportation system as a collection of distributed, interactive subsystems (e.g., airports, air-traffic control towers and personnel, aircraft, automated flight systems and air-traffic tools, instruments, crew). Brahms-GUeM can be configured in different ways, called scenarios, such that anomalous events that contributed to the Überlingen accident can be modeled as functioning according to requirements or in an

  15. Simulative research on reverse current in magnetically insulated coaxial diode

    Directory of Open Access Journals (Sweden)

    Danni Zhu

    2017-10-01

    Full Text Available The reverse current tends to occur in the transition region of the guiding magnetic field in a magnetically insulated coaxial diode (MICD. Influence of the guiding magnetic field on characteristics of the MICD especially on the reverse current is studied by the particle-in-cell (PIC simulation in this paper. The reverse current is confirmed to be irrelevant with the guiding magnetic field strength. However, the reverse current is clarified quantitatively to depend on the electric and magnetic field distribution in the upstream of the cathode tip. As the MICD has been widely employed in microwave tubes, a simple approach to suppress the reverse current on the premise of little change of the original diode is valuable and thus proposed. The optimum matching point between the cathode and the magnetic field is selected in consideration of the entrance depth tolerance, the diode impedance discrepancy and the reverse current coefficient.

  16. Research on Kinematic Trajectory Simulation System of KUKA Arc Welding Robot System

    Science.gov (United States)

    Hu, Min

    2017-10-01

    In this paper, the simulation trajectory simulation of KUKA arc welding robot system is realized by means of VC platform. It is used to realize the teaching of professional training of welding robot in middle school. It provides teaching resources for the combination of work and study and integration teaching, which enriches the content of course teaching.

  17. Leading survey and research report for fiscal 1999. Survey and research on chemical reaction simulator technology; 1999 nendo kagaku hanno simulator gijutsu no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Although various chemical reactions are made use of at scenes of chemical industry for the acquisition of desired chemicals, the control of reaction process governing factors, such as temperature, pressure, catalysts, solutions, etc., is found to be carried out only on the empirical basis. At the present time, rational or optimum reaction designs are not to be prepared in a short period of time in the presence of the widespread shortage of knowledge about chemical reactions and of the shortage of understanding of chemical reactions at the micro level. Leading survey and research are conducted for the development of a 'chemical reaction simulator' technology to enable the acquisition of optimum reaction designing guidelines in a short period of time. Using the simulator, a chemical of his choice is inputted by a researcher engaged in the study of an real chemical reaction and then various techniques of computer science are mobilized for the preparation of a huge number of feasible reaction routes, and high-precision simulations are conducted for the feasible reaction routes. The results achieved this fiscal year are reported. The purpose of this research and its ripple effect on new product industry creation are stated. Then the positioning, mission, and concept of such a chemical reaction simulator are described. Finally, the result of research and survey of knowledge databases and the result of research and survey of computational chemistry are stated. (NEDO)

  18. Leading survey and research report for fiscal 1999. Survey and research on chemical reaction simulator technology; 1999 nendo kagaku hanno simulator gijutsu no chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Although various chemical reactions are made use of at scenes of chemical industry for the acquisition of desired chemicals, the control of reaction process governing factors, such as temperature, pressure, catalysts, solutions, etc., is found to be carried out only on the empirical basis. At the present time, rational or optimum reaction designs are not to be prepared in a short period of time in the presence of the widespread shortage of knowledge about chemical reactions and of the shortage of understanding of chemical reactions at the micro level. Leading survey and research are conducted for the development of a 'chemical reaction simulator' technology to enable the acquisition of optimum reaction designing guidelines in a short period of time. Using the simulator, a chemical of his choice is inputted by a researcher engaged in the study of an real chemical reaction and then various techniques of computer science are mobilized for the preparation of a huge number of feasible reaction routes, and high-precision simulations are conducted for the feasible reaction routes. The results achieved this fiscal year are reported. The purpose of this research and its ripple effect on new product industry creation are stated. Then the positioning, mission, and concept of such a chemical reaction simulator are described. Finally, the result of research and survey of knowledge databases and the result of research and survey of computational chemistry are stated. (NEDO)

  19. Report of results on the research and development work 1979 of the Institute for Technical Chemistry

    International Nuclear Information System (INIS)

    1980-02-01

    The results report on the research and development work in 1979 carried out at the Institute for Technical Physics of the Nuclear Research Centre, Karlsruhe is concerned here. The main field of this development work is the research into superconducting magnets for fusion reactors. Studies are published on the material, processing and shape of these magnets. Furthermore, a report is given on fusion magnet technology, superconducting fundamentals and technical superconductors, as well as an cryonergy technique and cryotechnique. (KBI) [de

  20. Center for risk research: A review of work 1988-1991

    International Nuclear Information System (INIS)

    Sjoeberg, L.

    1992-01-01

    This report gives a summary of the research published during the first 4 years of the Center for Risk Research at the Stockholm School of Economics. Risk research carried out so far at the Center has been concerned with mapping of attitudes and risk perceptions with regard to nuclear risks, AIDS, military flight risks, and economic risks. There has also been some methodological work and some work on the relationship between risk perception and interests

  1. Center for risk research: A review of work 1988-1991

    Energy Technology Data Exchange (ETDEWEB)

    Sjoeberg, L

    1992-01-01

    This report gives a summary of the research published during the first 4 years of the Center for Risk Research at the Stockholm School of Economics. Risk research carried out so far at the Center has been concerned with mapping of attitudes and risk perceptions with regard to nuclear risks, AIDS, military flight risks, and economic risks. There has also been some methodological work and some work on the relationship between risk perception and interests.

  2. TEACHING SIMULATION: AN ACTION RESEARCH STUDY ON MRP CONTENT

    Directory of Open Access Journals (Sweden)

    Cristiano Henrique Antonelli da Veiga

    2014-06-01

    the presentation of the scientific content and the second, mediated experiences. The  development of the proposal was investigated using action research methodology through an exercise prepared by the teacher of the subject. Upon completion of the didactic activity, it was found that students improved their understanding of the concepts and logic of calculation and operationalization in mrp I.

  3. Researchers in Music Education/Therapy: Analysis of Publications, Citations, and Retrievability of Work.

    Science.gov (United States)

    Brittin, Ruth V.; Standley, Jayne

    1997-01-01

    Summarizes several citation analyses of articles appearing in the "Journal of Research in Music Education,""Bulletin of the Council for Research in Music Education," and "The Journal of Music Therapy." Identifies the most productive scholars, researchers, and universities. Investigates retrievability of related work by specialists outside the…

  4. Working the Dialectic: Teaching and Learning Teacher Research in Social Studies

    Science.gov (United States)

    Martell, Christopher C.; Sequenzia, Maria R.

    2016-01-01

    This article presents two narratives of teaching and learning teacher research in social studies. Organized around the concept of working the dialectic, two social studies educators discuss their experiences as teachers and learners of teacher research. This article highlights the power of practitioner research to transform teaching and teacher…

  5. A Review of the Empirical Generations at Work Research: Implications for School Leaders and Future Research

    Science.gov (United States)

    Edge, Karen

    2014-01-01

    Most schools currently employ three generations of teachers and leaders: Baby Boomers (1946-65), Generation X (1966-80) and Generation Y (1981-2003). However, the implications for school leaders of multi-generational schools remain relatively unexplored. This paper examines the empirical multi-disciplinary generations at work evidence to identify…

  6. Simulating Neutronic Core Parameters in a Research and Test Reactor

    International Nuclear Information System (INIS)

    Selim, H.K.; Amin, E.A.; Koutb, M.E.

    2011-01-01

    The present study proposes an Artificial Neural Network (ANN) modeling technique that predicts the control rods positions in a nuclear research reactor. The neutron, flux in the core of the reactor is used as the training data for the neural network model. The data used to train and validate the network are obtained by modeling the reactor core with the neutronic calculation code: CITVAP. The type of the network used in this study is the feed forward multilayer neural network with the backpropagation algorithm. The results show that the proposed ANN has good generalization capability to estimate the control rods positions knowing neutron flux for a research and test reactor. This method can be used to predict critical control rods positions to be used for reactor operation after reload

  7. Science Based Human Reliability Analysis: Using Digital Nuclear Power Plant Simulators for Human Reliability Research

    Science.gov (United States)

    Shirley, Rachel Elizabeth

    Nuclear power plant (NPP) simulators are proliferating in academic research institutions and national laboratories in response to the availability of affordable, digital simulator platforms. Accompanying the new research facilities is a renewed interest in using data collected in NPP simulators for Human Reliability Analysis (HRA) research. An experiment conducted in The Ohio State University (OSU) NPP Simulator Facility develops data collection methods and analytical tools to improve use of simulator data in HRA. In the pilot experiment, student operators respond to design basis accidents in the OSU NPP Simulator Facility. Thirty-three undergraduate and graduate engineering students participated in the research. Following each accident scenario, student operators completed a survey about perceived simulator biases and watched a video of the scenario. During the video, they periodically recorded their perceived strength of significant Performance Shaping Factors (PSFs) such as Stress. This dissertation reviews three aspects of simulator-based research using the data collected in the OSU NPP Simulator Facility: First, a qualitative comparison of student operator performance to computer simulations of expected operator performance generated by the Information Decision Action Crew (IDAC) HRA method. Areas of comparison include procedure steps, timing of operator actions, and PSFs. Second, development of a quantitative model of the simulator bias introduced by the simulator environment. Two types of bias are defined: Environmental Bias and Motivational Bias. This research examines Motivational Bias--that is, the effect of the simulator environment on an operator's motivations, goals, and priorities. A bias causal map is introduced to model motivational bias interactions in the OSU experiment. Data collected in the OSU NPP Simulator Facility are analyzed using Structural Equation Modeling (SEM). Data include crew characteristics, operator surveys, and time to recognize

  8. Researchers´ perceptions on their health and working conditions in Antioquia, Colombia

    Directory of Open Access Journals (Sweden)

    Silvia P. Díaz M

    Full Text Available Objective: to analyze how male and female scientific researchers working at public and private universities in Antioquia (Colombia perceive their health and working conditions. Methodology: a qualitative study conducted through interviews and a literature review. Participants belonged to research groups classified as A1, A, and B, according to the standards issued by Colciencias (Colombia’s national Department of Science, Technology and Innovation. Results: researchers perceive the relationship between their work and health as a blend of work-related demands, challenges, and personal and collective rewards. Demands on intellectual productivity are high; there is a mismatch between the actual time devoted to work and the time established in the work plans negotiated with the administration for every semester. In some points of the research process, these factors overload the daily work schedules, thus causing physical pain, stress, and malaise. Nevertheless, researchers find their work worthy because of the passion that research arouses in them. Discussion: The high demands defined within the framework of the National System for Science and Technology (Spanish acronym: SNCT have created a field in which intellectual productivity takes priority over the researchers’ health conditions.

  9. CFD SIMULATION OF AIR ION REGIME IN WORK AREAS AT CONDITION OF ARTIFICIAL AIR IONIZATION

    Directory of Open Access Journals (Sweden)

    M. M. Biliaiev

    2016-02-01

    Full Text Available Purpose. The paper supposes creation of a CFD model for calculating the air ion regime in the premises and in work areas at artificial ionization of the air by the ionizer installation indoors with considering the most important physical factors that influence the formation of ions concentration field. Methodology. The proposed CFD model for calculation of the air ion regime in work areas at artificial ionization of the air by installing ionizer indoors is based on the application of aerodynamics, electrostatics and mass transfer equations. The mass transfer equation takes into account the interaction of different polarities of ions with each other and with the dust particles. The calculation of air flow rate in the room is realized on the basis of the potential flow model by using the Laplace equation for the stream function. Poisson equation for the electric potential is used for calculation of the charged particles drift in an electric field. At the simulation to take into account: 1 influence of the working area geometric characteristics; 2 location of the ventilation holes; 3 placement of furniture and equipment; 4 ventilation regime in the room; 5 presence of obstacles on the ions dispersion process; 6 specific location of dust particles emission and ions of different polarity, and their interaction in the room and in the working zones. Findings. The developed CFD model allows determining the concentration of negative ions in the room and in the area of the human respiratory organs. The distribution of the negative ions concentration is presented in the form of concentration field isolines. Originality. The 2D CFD model for calculating the air ion regime in working areas, providing the ability to determine the ions concentration in a given place in the room was created. The proposed model is developed taking into account: placement of furniture and equipment in the room; geometric characteristics of the room; location of dust emissions

  10. The work-family interface: A retrospective look at 20 years of research in JOHP.

    Science.gov (United States)

    Allen, Tammy D; Martin, Angela

    2017-07-01

    As part of the 20th anniversary celebration for the Journal of Occupational Health Psychology (JOHP), this article reviews the literature on work-family with a special emphasis on research published in JOHP and that with health-related implications. We provide a retrospective overview of work-family research, tracing key papers and major theoretical constructs and themes. We examine the research needs identified by Westman and Piotrkowski (1999) and offer an assessment of the extent that work-family research has addressed those needs. Then we move on to discuss contemporary issues in the field today that constitute directions for future research. Specifically we discuss intervention studies, multilevel approaches, temporality and dynamic change, managerial perspectives, and diverse work settings. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  11. THE WORK SIMULATION OF FLOW RATE FOR CARRIAGES' REPAIR AS A MULTIPHASE, MULTIPLEX AND MULTIDISCIPLINARY SYSTEM OF MASS SERVICE

    Directory of Open Access Journals (Sweden)

    V. V. Myamlin

    2011-04-01

    Full Text Available The algorithm of computer simulation of the flexible flow for repair of cars as a multiphase polychannel manyobject queuing system is presented. The basic operators of the model are given and their work is described.

  12. Coulomb friction modelling in numerical simulations of vibration and wear work rate of multispan tube bundles

    International Nuclear Information System (INIS)

    Antunes, J.; Axisa, F.; Beaufils, B.; Guilbaud, D.

    1990-01-01

    The working life of heat exchanger multispan tube bundles subjected to flow-induced vibration, is heavily dependent on nonlinear interaction between the loosely supported tubes and their supports. Reliable wear prediction techniques must account for a number of factors controlling impact-sliding tube response, such as tube support gap, contact stiffness, impact damping, Coulomb friction and squeeze film effect at supports. Tube fretting wear potential risk may then be adequately quantified by an equivalent wear work rate. A simple model is presented which accounts for the key aspects of dry friction and is well suited to the efficient explicit numerical integration schemes, specifically through nonlinear model superposition. Extensive parametric two-dimensional simulations, under random vibration induced by flow turbulence, are presented. Also, the effect of permanent tube-support preload, arising from cross flow drag, tube-support misalignment and thermal expansion, is investigated. Results show that frictional forces consistently reduce wear work rates, which decrease for high values of the coefficient of friction. Such reductions may be extremely important for the limiting case when preload and frictional forces are of sufficient magnitude to overcome dynamic forces, preventing tube-support relative motion. (author)

  13. Learning in a Simulation-OT in Heart Surgery and the Challenges of the Scientification of Work

    Science.gov (United States)

    Langemeyer, Ines

    2014-01-01

    Enhancing competency and collaboration has become a salient topic of the professional debate on medical safety issues. The advantages of simulation-based training scenarios for team communication, routines and critical work procedures especially in operation theatres have been vigorously discussed. However, the literature on simulation-based…

  14. Research on the Intelligent Control and Simulation of Automobile Cruise System Based on Fuzzy System

    Directory of Open Access Journals (Sweden)

    Xue-wen Chen

    2016-01-01

    Full Text Available In order to improve the active safety driving vehicle and alleviate the intension of driving fatigue, an intelligent control strategy of automobile cruise is put forward based on the throttle or braking pedal combined control adopting the fuzzy control theory. A fuzzy logic controller is presented, which consists of the two input variables, the deviation of the theoretical safe distance and relative distance and the relative velocity between the preceding vehicle and the cruise vehicle, and the single output variable, that is, the throttle opening or the braking pedal travel. Taking the test data of 1.6 L vehicle with auto-transmission as an example, the function on the intelligent cruise control system is simulated adopting MATLAB/Simulink aiming at different working conditions on the city road. The simulation results show that the control strategy possesses integrated capability of automated Stop & Go control, actively following the preceding vehicle on the conditions of keeping the safety distance and the constant velocity cruise. The research results can offer the theory and technology reference for setting dSPACE type and developing the integrated control product of automobile cruise system.

  15. Conducting multicenter research in healthcare simulation: Lessons learned from the INSPIRE network.

    Science.gov (United States)

    Cheng, Adam; Kessler, David; Mackinnon, Ralph; Chang, Todd P; Nadkarni, Vinay M; Hunt, Elizabeth A; Duval-Arnould, Jordan; Lin, Yiqun; Pusic, Martin; Auerbach, Marc

    2017-01-01

    Simulation-based research has grown substantially over the past two decades; however, relatively few published simulation studies are multicenter in nature. Multicenter research confers many distinct advantages over single-center studies, including larger sample sizes for more generalizable findings, sharing resources amongst collaborative sites, and promoting networking. Well-executed multicenter studies are more likely to improve provider performance and/or have a positive impact on patient outcomes. In this manuscript, we offer a step-by-step guide to conducting multicenter, simulation-based research based upon our collective experience with the International Network for Simulation-based Pediatric Innovation, Research and Education (INSPIRE). Like multicenter clinical research, simulation-based multicenter research can be divided into four distinct phases. Each phase has specific differences when applied to simulation research: (1) Planning phase , to define the research question, systematically review the literature, identify outcome measures, and conduct pilot studies to ensure feasibility and estimate power; (2) Project Development phase , when the primary investigator identifies collaborators, develops the protocol and research operations manual, prepares grant applications, obtains ethical approval and executes subsite contracts, registers the study in a clinical trial registry, forms a manuscript oversight committee, and conducts feasibility testing and data validation at each site; (3) Study Execution phase , involving recruitment and enrollment of subjects, clear communication and decision-making, quality assurance measures and data abstraction, validation, and analysis; and (4) Dissemination phase , where the research team shares results via conference presentations, publications, traditional media, social media, and implements strategies for translating results to practice. With this manuscript, we provide a guide to conducting quantitative multicenter

  16. Development of Research Reactor Simulator and Its Application to Dynamic Test-bed

    International Nuclear Information System (INIS)

    Kwon, Kee Choon; Park, Jae Chang; Lee, Seung Wook; Bang, Dane; Bae, Sung Won

    2014-01-01

    We developed HANARO and the Jordan Research and Training Reactor (JRTR) real-time simulator for operating staff training. The main purpose of this simulator is operator training, but we modified this simulator as a dynamic test-bed to test the reactor regulating system in HANARO or JRTR before installation. The simulator configuration is divided into hardware and software. The simulator hardware consists of a host computer, 6 operator stations, a network switch, and a large display panel. The simulator software is divided into three major parts: a mathematical modeling module, which executes the plant dynamic modeling program in real-time, an instructor station module that manages user instructions, and a human machine interface (HMI) module. The developed research reactors are installed in the Korea Atomic Energy Research Institute nuclear training center for reactor operator training. To use the simulator as a dynamic test-bed, the reactor regulating system modeling software of the simulator was replaced by a hardware controller and the simulator and target controller were interfaced with a hard-wired and network-based interface

  17. Leveraging Health Care Simulation Technology for Human Factors Research: Closing the Gap Between Lab and Bedside.

    Science.gov (United States)

    Deutsch, Ellen S; Dong, Yue; Halamek, Louis P; Rosen, Michael A; Taekman, Jeffrey M; Rice, John

    2016-11-01

    We describe health care simulation, designed primarily for training, and provide examples of how human factors experts can collaborate with health care professionals and simulationists-experts in the design and implementation of simulation-to use contemporary simulation to improve health care delivery. The need-and the opportunity-to apply human factors expertise in efforts to achieve improved health outcomes has never been greater. Health care is a complex adaptive system, and simulation is an effective and flexible tool that can be used by human factors experts to better understand and improve individual, team, and system performance within health care. Expert opinion is presented, based on a panel delivered during the 2014 Human Factors and Ergonomics Society Health Care Symposium. Diverse simulators, physically or virtually representing humans or human organs, and simulation applications in education, research, and systems analysis that may be of use to human factors experts are presented. Examples of simulation designed to improve individual, team, and system performance are provided, as are applications in computational modeling, research, and lifelong learning. The adoption or adaptation of current and future training and assessment simulation technologies and facilities provides opportunities for human factors research and engineering, with benefits for health care safety, quality, resilience, and efficiency. Human factors experts, health care providers, and simulationists can use contemporary simulation equipment and techniques to study and improve health care delivery. © 2016, Human Factors and Ergonomics Society.

  18. Development of Research Reactor Simulator and Its Application to Dynamic Test-bed

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Kee Choon; Park, Jae Chang; Lee, Seung Wook; Bang, Dane; Bae, Sung Won [KAERI, Daejeon (Korea, Republic of)

    2014-08-15

    We developed HANARO and the Jordan Research and Training Reactor (JRTR) real-time simulator for operating staff training. The main purpose of this simulator is operator training, but we modified this simulator as a dynamic test-bed to test the reactor regulating system in HANARO or JRTR before installation. The simulator configuration is divided into hardware and software. The simulator hardware consists of a host computer, 6 operator stations, a network switch, and a large display panel. The simulator software is divided into three major parts: a mathematical modeling module, which executes the plant dynamic modeling program in real-time, an instructor station module that manages user instructions, and a human machine interface (HMI) module. The developed research reactors are installed in the Korea Atomic Energy Research Institute nuclear training center for reactor operator training. To use the simulator as a dynamic test-bed, the reactor regulating system modeling software of the simulator was replaced by a hardware controller and the simulator and target controller were interfaced with a hard-wired and network-based interface.

  19. Using Computer Simulations of Negotiation for Educational and Research Purposes in Business Schools.

    Science.gov (United States)

    Conlon, Donald E.

    1989-01-01

    Discussion of educational and research advantages of using computer-based experimental simulations for the study of negotiation and dispute resolution in business schools focuses on two studies of undergraduates that used simulation exercises. The influence of time pressure on mediation is examined, and differences in student behavior are…

  20. Recognising contributions to work in research collaboratives: Guidelines for standardising reporting of authorship in collaborative research.

    Science.gov (United States)

    2018-04-01

    Trainee research collaboratives (TRCs) have been revolutionary changes to the delivery of high-quality, multicentre research. The aim of this study was to define common roles in the conduct of collaborative research, and map these to academic competencies as set out by General Medical Council (GMC) in the United Kingdom. This will support trainers and assessors when judging academic achievements of those involved in TRC projects, and supports trainees by providing guidance on how to fulfil their role in these studies. A modified Delphi process was followed. Electronic discussion with key stakeholders was undertaken to identify and describe common roles. These were refined and mapped to GMC educational domains and International Committee of Medical Journal Editors authorship (ICJME) guidelines. The resulting roles and descriptions were presented to a face-to-face consensus meeting for voting. The agreed roles were then presented back to the electronic discussion group for approval. Electronic discussion generated six common roles. All of these were agreed in face-to-face meetings, where two further roles identified and described. All eight roles required skills that map to part of the academic requirements for surgical training in the UK. This paper presents a standardised framework for reporting authorship in collaborative group authored research publications. Linkage of collaborator roles to the ICMJE guidelines and GMC academic competency guidelines will facilitate incorporation into relevant training curricular and journal publication policies. Copyright © 2017 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.

  1. The use of adaptation to reduce simulator sickness in driving assessment and research.

    Science.gov (United States)

    Domeyer, Joshua E; Cassavaugh, Nicholas D; Backs, Richard W

    2013-04-01

    The technical advancement of driving simulators has decreased their cost and increased both their accuracy and fidelity. This makes them a useful tool for examining driving behavior in risky or unique situations. With the approaching increase of older licensed drivers due to aging of the baby boomers, driving simulators will be important for conducting driving research and evaluations for older adults. With these simulator technologies, some people may experience significant effects of a unique form of motion sickness, known as simulator sickness. These effects may be more pronounced in older adults. The present study examined the feasibility of an intervention to attenuate symptoms of simulator sickness in drivers participating in a study of a driving evaluation protocol. Prior to beginning the experiment, the experimental groups did not differ in subjective simulator sickness scores as indicated by Revised Simulator Sickness Questionnaire scores (all p>0.5). Participants who experienced a two-day delay between an initial acclimation to the driving simulator and the driving session experienced fewer simulator sickness symptoms as indicated by RSSQ total severity scores than participants who did not receive a two-day delay (F(1,88)=4.54, p=.036, partial η(2)=.049). These findings have implications for improving client well-being and potentially increasing acceptance of driving simulation for driving evaluations and for driving safety research. Copyright © 2013 Elsevier Ltd. All rights reserved.

  2. [STRESS DUE TO THE WORK-LIFE CONFLICT: ADVICES FROM APPLIED RESEARCH FOR COPING IT].

    Science.gov (United States)

    Poerio, Vincenzo

    2015-01-01

    Unlike most of the work-related stress research, which emphasizes how to manage stressors and maximize the psychological well-being, the present article focuses on one particular kind of stressor: the experience of conflict or interference between demands at work and responsibilities and commitments outside of the work setting, especially in respect offamily life and one's personal life. Referred to as "work-family conflict" or (more recently) "work-life conflict", this stressor has been demonstrated in research since the 1990s to exert a considerable impact on individuals' well-being along with other areas such as family functioning and even performance on the job. In contrast to the intra-role conflict, which refers to interference between roles within a single domain (e.g., the work context), work-family (or work-life) conflict is a form of inter-role interference which occurs when there is conflict across domains. In the 1980s and 1990s, research and writing in this area focused predominantly on work versus family, but in recent years the "non-work" component has been expanded to include other aspects of people's lives. For simplicity, we will refer to the two major spheres as the "work domain" (i.e., a person's paid employment) and the "life domain" (which comprises all other dimensions of life, including family, recreation, community activities and personal life). Although this classification is not entirely appropriate, it enables differentiation between the two spheres.

  3. TRAC-Monterey FY16 Work Program Development and Report of Research Elicitation

    Science.gov (United States)

    2016-01-01

    any changes to priorities or additional projects that require immediate research. Work Program; Research Elicitation Unclassified UU UU UU UU 35 MAJ...conduct analysis for the Army. 1 Marks, Chris, Nesbitt, Peter. TRAC FY14 Research Requirements Elicitation . Technical Report TRAC-M-TM-13-059. 700 Dyer... Requirements Elicitation Interviews Interview Guide: 1. Describe a research requirement in the areas of topics, techniques, and methodologies. 2

  4. Dynamic simulation platform to verify the performance of the reactor regulating system for a research reactor

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2015-07-01

    Digital instrumentation and controls system technique is being introduced in new constructed research reactor or life extension of older research reactor. Digital systems are easy to change and optimize but the validated process for them is required. Also, to reduce project risk or cost, we have to make it sure that configuration and control functions is right before the commissioning phase on research reactor. For this purpose, simulators have been widely used in developing control systems in automotive and aerospace industries. In these literatures, however, very few of these can be found regarding test on the control system of research reactor with simulator. Therefore, this paper proposes a simulation platform to verify the performance of RRS (Reactor Regulating System) for research reactor. This simulation platform consists of the reactor simulation model and the interface module. This simulation platform is applied to I and C upgrade project of TRIGA reactor, and many problems of RRS configuration were found and solved. And it proved that the dynamic performance testing based on simulator enables significant time saving and improves economics and quality for RRS in the system test phase. (authors)

  5. Characteristics of economic and mathematical simulation of development of working mines

    Energy Technology Data Exchange (ETDEWEB)

    Gorodnichiy, V G

    1979-01-01

    Economic and mathematical simulation is promoted by a standard procedure of computations to optimize development of production for the future as the principal method of solution of a problem. However traditional approaches to design of models need refinement which take into account the dynamic nature of a coal mine. First, the characteristics of the elements in subsystems change; second, as time passes the very structure of the system is transformed. Consequently, these processes should be reflected in the simulation in a corresponding manner. In practical terms this is expressed in the formation of files of forecast information used in computations according to a model and also in development of procedures of transformation of the model structure with a change of the structure of the subject mine with time. Let us note that the invariability of the state of the principal elements of the technological scheme of a mine with time is the necessary condition of acceptability of a model of the evolution type which is most common. For working mines the freedom of selecting solutions is considerably less than the analogous one in design.

  6. Methodological integrative review of the work sampling technique used in nursing workload research.

    Science.gov (United States)

    Blay, Nicole; Duffield, Christine M; Gallagher, Robyn; Roche, Michael

    2014-11-01

    To critically review the work sampling technique used in nursing workload research. Work sampling is a technique frequently used by researchers and managers to explore and measure nursing activities. However, work sampling methods used are diverse making comparisons of results between studies difficult. Methodological integrative review. Four electronic databases were systematically searched for peer-reviewed articles published between 2002-2012. Manual scanning of reference lists and Rich Site Summary feeds from contemporary nursing journals were other sources of data. Articles published in the English language between 2002-2012 reporting on research which used work sampling to examine nursing workload. Eighteen articles were reviewed. The review identified that the work sampling technique lacks a standardized approach, which may have an impact on the sharing or comparison of results. Specific areas needing a shared understanding included the training of observers and subjects who self-report, standardization of the techniques used to assess observer inter-rater reliability, sampling methods and reporting of outcomes. Work sampling is a technique that can be used to explore the many facets of nursing work. Standardized reporting measures would enable greater comparison between studies and contribute to knowledge more effectively. Author suggestions for the reporting of results may act as guidelines for researchers considering work sampling as a research method. © 2014 John Wiley & Sons Ltd.

  7. Bright-light exposure during daytime sleeping affects nocturnal melatonin secretion after simulated night work.

    Science.gov (United States)

    Nagashima, Shunsuke; Osawa, Madoka; Matsuyama, Hiroto; Ohoka, Wataru; Ahn, Aemi; Wakamura, Tomoko

    2018-02-01

    The guidelines for night and shift workers recommend that after night work, they should sleep in a dark environment during the daytime. However, staying in a dark environment during the daytime reduces nocturnal melatonin secretion and delays its onset. Daytime bright-light exposure after night work is important for melatonin synthesis the subsequent night and for maintaining the circadian rhythms. However, it is not clear whether daytime sleeping after night work should be in a dim- or a bright-light environment for maintaining melatonin secretion. The aim of this study, therefore, was to evaluate the effect of bright-light exposure during daytime sleeping on nocturnal melatonin secretion after simulated night work. Twelve healthy male subjects, aged 24.8 ± 4.6 (mean ± SD), participated in 3-day sessions under two experimental conditions, bright light or dim light, in a random order. On the first day, the subjects entered the experimental room at 16:00 and saliva samples were collected every hour between 18:00 and 00:00 under dim-light conditions. Between 00:00 and 08:00, they participated in tasks that simulated night work. At 10:00 the next morning, they slept for 6 hours under either a bright-light condition (>3000 lx) or a dim-light condition (night work were compared between the light conditions using paired t-tests. The ANOVA results indicated a significant interaction (light condition and3 day) (p = .006). Post hoc tests indicated that in the dim-light condition, the melatonin concentration was significantly lower on the second day than on the first day (p = .046); however, in the bright-light condition, there was no significant difference in the melatonin concentration between the days (p = .560). There was a significant difference in ΔDLMO between the conditions (p = .015): DLMO after sleeping was advanced by 11.1 ± 17.4 min under bright-light conditions but delayed for 7.2 ± 13.6 min after sleeping under dim-light conditions. No

  8. Exploratory Research on Simulation of CO2-Brine-Mineral Interactions

    Energy Technology Data Exchange (ETDEWEB)

    Chen Zhu; Shiao hung Chiang

    2005-11-01

    Application of many carbon sequestration strategies requires knowledge of thermodynamic properties for the extremely complex chemical system of CO{sub 2}-SO{sub 2}-H{sub 2}O-NaCl-CaCl{sub 2}-MgCl{sub 2}. This University Coal Research Phase I program has been successful and highly productive in exploring an approach to develop an equation of state (EOS) to describe thermodynamic properties in the above chemical system. We have compiled available laboratory experimental data and thermodynamic models, and evaluated their appropriateness for the carbon sequestration process. Based on this literature review, we provided an improved CO{sub 2} solubility model for the CO{sub 2}-H{sub 2}O-NaCl system, which incorporates newly available experimental measurements funded by DOE, and is valid in temperature range from 273 to 533 K, pressure from 0 to 2000 bar, and salinity from 0 to 4.5 molality of NaCl equivalent. The improved model also greatly improves the computational efficiency of CO{sub 2} solubility calculations and thus is better suited to be incorporated into large computer simulation models (e.g., reservoir simulation models). The literature review and model development provided insights of the data needs and directions for future work. Synergetic collaboration with DOE scientists has resulted in simulations of injected CO{sub 2} fate in sandstone aquifer with a one-dimensional numerical coupled reactive transport model. We evaluated over 100 references on CO{sub 2} solubility and submitted two manuscripts to peer-reviewed journals. One paper has been accepted for publication in ''Environmental Geosciences''.

  9. A research framework for the development and implementation of interventions preventing work-related musculoskeletal disorders.

    Science.gov (United States)

    van der Beek, Allard J; Dennerlein, Jack T; Huysmans, Maaike A; Mathiassen, Svend Erik; Burdorf, Alex; van Mechelen, Willem; van Dieën, Jaap H; Frings-Dresen, Monique Hw; Holtermann, Andreas; Janwantanakul, Prawit; van der Molen, Henk F; Rempel, David; Straker, Leon; Walker-Bone, Karen; Coenen, Pieter

    2017-11-01

    Objectives Work-related musculoskeletal disorders (MSD) are highly prevalent and put a large burden on (working) society. Primary prevention of work-related MSD focuses often on physical risk factors (such as manual lifting and awkward postures) but has not been too successful in reducing the MSD burden. This may partly be caused by insufficient knowledge of etiological mechanisms and/or a lack of adequately feasible interventions (theory failure and program failure, respectively), possibly due to limited integration of research disciplines. A research framework could link research disciplines thereby strengthening the development and implementation of preventive interventions. Our objective was to define and describe such a framework for multi-disciplinary research on work-related MSD prevention. Methods We described a framework for MSD prevention research, partly based on frameworks from other research fields (ie, sports injury prevention and public health). Results The framework is composed of a repeated sequence of six steps comprising the assessment of (i) incidence and severity of MSD, (ii) risk factors for MSD, and (iii) underlying mechanisms; and the (iv) development, (v) evaluation, and (vi) implementation of preventive intervention(s). Conclusions In the present framework for optimal work-related MSD prevention, research disciplines are linked. This framework can thereby help to improve theories and strengthen the development and implementation of prevention strategies for work-related MSD.

  10. Moving Away from Social Work and Half Way Back Again: New Research on Skills in Probation

    Science.gov (United States)

    Raynor, Peter; Vanstone, Maurice

    2016-01-01

    Research on social work in the criminal justice system was well represented in the social work literature until the 1990s. Since then, changes in the organisation, training and research base of probation practice, particularly in England and Wales, have all contributed to a separation between probation research and the mainstream social work research literature. However, recent probation research, by focusing on individual practice skills and on the quality of relationships, is producing findings which resonate with traditional social work concerns. The study presented here, based on analysis of videotaped interviews between probation staff and the people they are supervising, shows what skills are used and the effects of skilled supervision. People supervised by more skilled staff were significantly less likely to be reconvicted over a two-year follow-up, and the most effective supervisors combined good relationship skills with a range of ‘structuring’ or change-promoting skills. In effect, this can be regarded as a test of the impact of social work skills used by probation staff and suggests that a closer relationship between mainstream social work research and probation research could be productive for both. PMID:27559218

  11. Annual report 1992 on research and development work by the IMF, Institute for Materials Research

    International Nuclear Information System (INIS)

    1993-03-01

    The present annual report describes the activities undertaken by the IMF in the following areas: 1. Low-pollutant and low-waste techniques (treatment and utilization of special wastes); 2. Nuclear fusion (studies for NET/ITER; structural materials for fusion devices; superconducting magnets; plasmas heating technique; blanket development; component-related safety investigations); 3. Nuclear safety research (safety and materials of fast breeders; transient behaviour of fast breeder fuel elements; LWR-oriented safety research; containment concepts for PWR-plants); 4. Nuclear waste management (materials studies of waste forms); 5. Superconductivity (superconductor developments); 6. Microsystems engineering (development and testing of compact and laminated materials of microsystems engineering); 7. Handling technique (remote handling components for invasive surgery); 8. Materials and interfaces (inter alia high-performance ceramics, failure behaviour, LCP, biomechanics). The appendix lists all publications or primary reports by the IMF in 1992. (orig./HP) [de

  12. Smoked marijuana attenuates performance and mood disruptions during simulated night shift work.

    Science.gov (United States)

    Keith, Diana R; Gunderson, Erik W; Haney, Margaret; Foltin, Richard W; Hart, Carl L

    2017-09-01

    Individuals who work nonstandard schedules, such as rotating or night shifts, are more susceptible to workplace injuries, performance decrements, and reduced productivity. This population is also almost twice as likely to use illicit drugs as individuals working a standard day shift. The purpose of this study was to examine the effects of smoked marijuana on performance, mood, and sleep during simulated shift work. Ten experienced marijuana smokers completed this 23-day, within-participant residential study. They smoked a single marijuana cigarette (0, 1.9, 3.56% Δ 9 -THC) one hour after waking for three consecutive days under two shift conditions: day shift and night shift. Shifts alternated three times during the study, and shift conditions were separated by an 'off' day. When participants smoked placebo cigarettes, psychomotor performance and subjective-effect ratings were altered during the night shift compared to the day shift: performance (e.g., vigilance) and a few subjective ratings were decreased (e.g., "Self-Confident"), whereas other ratings were increased (e.g., "Tired"). Objective and subjective measures of sleep were also disrupted, but to a lesser extent. Marijuana attenuated some performance, mood, and sleep disruptions: participants performed better on vigilance tasks, reported being less miserable and tired and sleep a greater number of minutes. Limited negative effects of marijuana were noted. These data demonstrate that abrupt shift changes produce performance, mood, and sleep decrements during night shift work and that smoked marijuana containing low to moderate Δ 9 -THC concentrations can offset some of these effects in frequent marijuana smokers. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. Simulation in Pre-departure Training for Residents Planning Clinical Work in a Low-Income Country

    Directory of Open Access Journals (Sweden)

    Kevin R. Schwartz

    2015-12-01

    Full Text Available Introduction: Increasingly, pediatric and emergency medicine (EM residents are pursuing clinical rotations in low-income countries. Optimal pre-departure preparation for such rotations has not yet been established. High-fidelity simulation represents a potentially effective modality for such preparation. This study was designed to assess whether a pre-departure high-fidelity medical simulation curriculum is effective in helping to prepare residents for clinical rotations in a low-income country. Methods: 43 pediatric and EM residents planning clinical rotations in Liberia, West Africa, participated in a simulation-based curriculum focused on severe pediatric malaria and malnutrition and were then assessed by survey at three time points: pre-simulation, post-simulation, and after returning from work abroad. Results: Prior to simulation, 1/43 (2% participants reported they were comfortable with the diagnosis and management of severe malnutrition; this increased to 30/42 (71% after simulation and 24/31 (77% after working abroad. Prior to simulation, 1/43 (2% of residents reported comfort with the diagnosis and management of severe malaria; this increased to 26/42 (62% after simulation and 28/31 (90% after working abroad; 36/42 (86% of residents agreed that a simulation-based global health curriculum is more useful than a didactic curriculum alone, and 41/42 (98% felt a simulator-based curriculum should be offered to all residents planning a clinical trip to a low-income country. Conclusion: High-fidelity simulation is effective in increasing residents’ self-rated comfort in management of pediatric malaria and malnutrition and a majority of participating residents feel it should be included as a component of pre-departure training for all residents rotating clinically to low-income countries.

  14. How Experienced SoTL Researchers Develop the Credibility of Their Work

    Directory of Open Access Journals (Sweden)

    Jennie Billot

    2017-03-01

    Full Text Available Teaching and learning research in higher education, often referred to as the Scholarship of Teaching and Learning (SoTL, is still relatively novel in many academic contexts compared to the mainstay of disciplinary research. One indication of this is the challenges those who engage in SoTL report in terms of how this work is valued or considered credible amongst disciplinary colleagues and in the face of institutional policies and practices. This paper moves beyond the literature that describes these specific challenges to investigate how 23 experienced SoTL researchers from five different countries understood the notion of credibility in relationship to their SoTL research and how they went about developing credibility for their work. Semi-structured interviews were facilitated and analyzed using inductive analysis. Findings indicate that notions of credibility encompassed putting SoTL research into action and building capacity and community around research findings, as well as gaining external validation through traditional indicators such as publishing. SoTL researchers reported a variety of strategies and approaches they were using, both formal and informal, to develop credibility for their work. The direct focus of this paper on credibility of SoTL work as perceived by experienced SoTL researchers, and how they go about developing credibility, is a distinct contribution to the discussions about the valuing of SoTL work.

  15. Developing an edugame simulation application for engineering : It works in practice, but will it work in theory?

    NARCIS (Netherlands)

    Keenaghan, G.; Horvath, I.; Van der Vegte, W.F.

    2015-01-01

    This article describes the development of a web-based 3D simulation of an engineering workshop in refrigeration plant maintenance and the challenge of moving the application from a knowledge and skills acquisition model to a problem-solving edugame model across a range of possible scenarios within

  16. Research opportunities in simulation-based medical education using deliberate practice.

    Science.gov (United States)

    McGaghie, William C

    2008-11-01

    There are many opportunities for the academic emergency medicine (EM) community to engage in simulation-based educational research using deliberate practice (DP). This article begins by defining and giving examples of two key concepts: deliberate practice and mastery learning. The article proceeds to report six lessons learned from a research legacy in simulation-based medical education (SBME). It concludes by listing and amplifying 10 DP research opportunities in academic EM. A coda states that the research agenda is rich and ambitious and should focus on the goal of educating superb, expert clinicians.

  17. FAA and NASA UTM Research Transition Team: Communications and Navigation (CN) Working Group (WCG) Kickoff Meeting

    Science.gov (United States)

    Jung, Jaewoo; Larrow, Jarrett

    2017-01-01

    This is NASA FAA UTM Research Transition Team Communications and Navigation working group kick off meeting presentation that addresses the followings. Objectives overview Overall timeline and scope Outcomes and expectations Communication method and frequency of meetings Upcoming evaluation Next steps.

  18. Postprandial metabolic profiles following meals and snacks eaten during simulated night and day shift work.

    Science.gov (United States)

    Al-Naimi, S; Hampton, S M; Richard, P; Tzung, C; Morgan, L M

    2004-01-01

    Shift workers are known to have an increased risk of developing cardiovascular disease (CVD) compared with day workers. An important factor contributing to this increased risk could be the increased incidence of postprandial metabolic risk factors for CVD among shift workers, as a consequence of the maladaptation of endogenous circadian rhythms to abrupt changes in shift times. We have previously shown that both simulated and real shift workers showed relatively impaired glucose and lipid tolerance if a single test meal was consumed between 00:00-02:00 h (night shift) compared with 12:00-14:00 h (day shift). The objective of the present study was to extend these observations to compare the cumulative metabolic effect of consecutive snacks/meals, as might normally be consumed throughout a period of night or day shift work. In a randomized crossover study, eight healthy nonobese men (20-33 yrs, BMI 20-25kg/m2) consumed a combination of two meals and a snack on two occasions following a standardized prestudy meal, simulating night and day shift working (total energy 2500 kcal: 40% fat, 50% carbohydrate, 10% protein). Meals were consumed at 01:00/ 13:00 h and 07:00/19:00h, and the snack at 04:00/16:00 h. Blood was taken after an overnight fast, and for 8 h following the first meal on each occasion, for the measurement of glucose, insulin, triacylglycerol (TAG), and nonesterified fatty acids (NEFA). RM-ANOVA (factors time and shift) showed a significant effect of shift for plasma TAG, with higher levels on simulated night compared to day shift (p effect of shift for plasma glucose, with higher plasma glucose at night (p = 0.08), and there was a time-shift interaction for plasma insulin levels (p shift. Inspection of the area under the plasma response curve (AUC) following each meal and snack revealed that the differences in lipid tolerance occurred throughout the study, with greatest differences occurring following the mid-shift snack. In contrast, glucose tolerance was

  19. Evaluation of snowmelt simulation in the Weather Research and Forecasting model

    Science.gov (United States)

    Jin, Jiming; Wen, Lijuan

    2012-05-01

    The objective of this study is to better understand and improve snowmelt simulations in the advanced Weather Research and Forecasting (WRF) model by coupling it with the Community Land Model (CLM) Version 3.5. Both WRF and CLM are developed by the National Center for Atmospheric Research. The automated Snow Telemetry (SNOTEL) station data over the Columbia River Basin in the northwestern United States are used to evaluate snowmelt simulations generated with the coupled WRF-CLM model. These SNOTEL data include snow water equivalent (SWE), precipitation, and temperature. The simulations cover the period of March through June 2002 and focus mostly on the snowmelt season. Initial results show that when compared to observations, WRF-CLM significantly improves the simulations of SWE, which is underestimated when the release version of WRF is coupled with the Noah and Rapid Update Cycle (RUC) land surface schemes, in which snow physics is oversimplified. Further analysis shows that more realistic snow surface energy allocation in CLM is an important process that results in improved snowmelt simulations when compared to that in Noah and RUC. Additional simulations with WRF-CLM at different horizontal spatial resolutions indicate that accurate description of topography is also vital to SWE simulations. WRF-CLM at 10 km resolution produces the most realistic SWE simulations when compared to those produced with coarser spatial resolutions in which SWE is remarkably underestimated. The coupled WRF-CLM provides an important tool for research and forecasts in weather, climate, and water resources at regional scales.

  20. A Coupling Vibration Test Bench and the Simulation Research of a Maglev Vehicle

    Directory of Open Access Journals (Sweden)

    Weihua Ma

    2015-01-01

    Full Text Available To study the characteristics of the coupling vibration between a maglev vehicle and its track beam system and to improve the performance of the levitation system, a new type of vibration test bench was developed. Take a single maglev frame as the study object; simulation of the coupling vibration of the maglev vehicle, levitation system, and track beam were achieved. In addition, all types of real track irregularity excitations can be simulated using hydraulic actuators of the test bench. To expand the research scope, a simulation model was developed that can conduct the simulation research synergistically with the test bench. Based on a dynamics model of the test bench, the dynamics simulation method determined the influence on the levitation control performance of three factors: the track beam support stiffness, the track beam mass, and the track irregularity. The vibration resonance phenomenon of the vehicle/track system was reproduced by the dynamics simulation, and a portion of the simulation results were validated by the test results. By combining the test bench and the dynamics model, experiments can be guided by the simulation results, and the experimental results can validate the dynamics simulation results.

  1. Development of a research simulator for the study of human factors and experiments

    International Nuclear Information System (INIS)

    Kawano, R.; Shibuya, S.

    1999-01-01

    A research simulator of nuclear power plant for Human Factors was developed. It simulates the behaviors of the 1100MWe BWR nuclear power plant and has almost same functions ant scope of the simulation as a full-scope training simulator. Physical models installed in the system enable us to execute experiments with multi-malfunction scenario. A severe accident simulation package replaces the running simulation code when the maximum core temperature exceeds 1200 deg C and the core approaches meltdown conditions. The central control panel was simulated by soft panels, indicator and operational switches on the panels by computer graphics, displayed on 22 console boxes containing CRT. The introduction of soft panels and EWSs connected with LAN accomplished flexibility and extendibility. Some experiments by using the simulator were executed and the system has been improved based on the experience from the experiments. It is important to evaluate the effectiveness of any new system by using an actual plant size research simulator before its practical application to keep steady and safe operation of nuclear power plants. (author)

  2. Acute effects of different light spectra on simulated night-shift work without circadian alignment.

    Science.gov (United States)

    Canazei, Markus; Pohl, Wilfried; Bliem, Harald R; Weiss, Elisabeth M

    2017-01-01

    Short-wavelength and short-wavelength-enhanced light have a strong impact on night-time working performance, subjective feelings of alertness and circadian physiology. In the present study, we investigated acute effects of white light sources with varied reduced portions of short wavelengths on cognitive and visual performance, mood and cardiac output.Thirty-one healthy subjects were investigated in a balanced cross-over design under three light spectra in a simulated night-shift paradigm without circadian adaptation.Exposure to the light spectrum with the largest attenuation of short wavelengths reduced heart rate and increased vagal cardiac parameters during the night compared to the other two light spectra without deleterious effects on sustained attention, working memory and subjective alertness. In addition, colour discrimination capability was significantly decreased under this light source.To our knowledge, the present study for the first time demonstrates that polychromatic white light with reduced short wavelengths, fulfilling current lighting standards for indoor illumination, may have a positive impact on cardiac physiology of night-shift workers without detrimental consequences for cognitive performance and alertness.

  3. USE OF INFORMATION TECHNOLOGY IN RESEARCH WORK OF FUTURE SOFTWARE ENGINEERS

    Directory of Open Access Journals (Sweden)

    M.O. Vinnik

    2014-04-01

    Full Text Available The article describes practical cooperation experience of Kherson State University’s lecturers group and students on software creation for automation, selection and processing of information about the universities scientists publication on the Internet. Recently, much attention is paid to scientometric bases by scientific societies of Eastern Europe. Large number of countries creates their own scientometric bases, platforms and other services. Working on familiar projects the future software engineers can be ready to implement similar tasks as for own country and for the world leaders. The result of research group work should be creation of software tools to support the business processes of research activities at the university. The involvement of students in research work allows using their creativity and employment potential for solving urgent problems of university, raising research competence of students’ professional skills in computer science and software engineering, which are involved in design and development of real software product. Participation of students in each stage is essential element of research group work. While creating software, students receive not only theoretical and practical knowledge of research work but also enhance their professional competences, as projects implementation is the closest to the professional software engineer’s work.

  4. Reflections on shifts in the work identity of research team members

    Directory of Open Access Journals (Sweden)

    Rina A. Smith

    2015-06-01

    Full Text Available Orientation: This study explores shifts in the work identity of individual members of a research team. Research purpose: The aim of the study is to explore shifts in work identity experienced by individual research team members during a project wherein they were studying work identity themselves. Motivation for the study: This study seized the opportunity to do research on the shifts in work identify experienced by researchers whilst they were studying work identify as part of the South African–Netherlands Project for Alternatives in Development. This allowed the researcher the rather novel opportunity of conducting research on researchers and resulted in the project as a whole occurring at a dual level of analysis. Research approach, design and method: Using thematic analysis methodology in the context of qualitative field research, 10 semi-structured interviews were conducted with five participants, all of them part of the research team who were themselves involved in conducting research on work identity. The sixth member of the research team, who is also one of the authors of this article, presented data related to shifts in her own work identity in her dissertation as an autoethnographic account. For purposes of this article, she is referred to as Participant 6. Given the multiple research team members, each one of whom constituted an individual case, the researcher made use of a multiple case study approach whilst focusing on the intrinsic case. The holistic nature of description found in the case study involved every aspect of the lives of the research team members. Analysis was done by means of content analysis. Main findings: In exploring the shifts in work identity experienced by individual research team members, it was discovered that finding meaning and purpose in the professional activities participants engaged in was of critical importance. Contextual realities and the way in which individuals approached the possibility of shifts

  5. Capturing readiness to learn and collaboration as explored with an interprofessional simulation scenario: A mixed-methods research study.

    Science.gov (United States)

    Rossler, Kelly L; Kimble, Laura P

    2016-01-01

    Didactic lecture does not lend itself to teaching interprofessional collaboration. High-fidelity human patient simulation with a focus on clinical situations/scenarios is highly conducive to interprofessional education. Consequently, a need for research supporting the incorporation of interprofessional education with high-fidelity patient simulation based technology exists. The purpose of this study was to explore readiness for interprofessional learning and collaboration among pre-licensure health professions students participating in an interprofessional education human patient simulation experience. Using a mixed methods convergent parallel design, a sample of 53 pre-licensure health professions students enrolled in nursing, respiratory therapy, health administration, and physical therapy programs within a college of health professions participated in high-fidelity human patient simulation experiences. Perceptions of interprofessional learning and collaboration were measured with the revised Readiness for Interprofessional Learning Scale (RIPLS) and the Health Professional Collaboration Scale (HPCS). Focus groups were conducted during the simulation post-briefing to obtain qualitative data. Statistical analysis included non-parametric, inferential statistics. Qualitative data were analyzed using a phenomenological approach. Pre- and post-RIPLS demonstrated pre-licensure health professions students reported significantly more positive attitudes about readiness for interprofessional learning post-simulation in the areas of team work and collaboration, negative professional identity, and positive professional identity. Post-simulation HPCS revealed pre-licensure nursing and health administration groups reported greater health collaboration during simulation than physical therapy students. Qualitative analysis yielded three themes: "exposure to experiential learning," "acquisition of interactional relationships," and "presence of chronology in role preparation

  6. Capillary Discourses, Fissure Points, and Tacitly Confessing the Self: Foucault's Later Work and Educational Research

    Science.gov (United States)

    Worthman, Christopher; Troiano, Beverly

    2016-01-01

    This article draws on Foucault's later work to consider in an exploratory but specific way how that work can inform educational research. It introduces the concepts of "capillary discourses" and "fissure points" to show, by way of example, how a regime of truth such as neoliberalism shapes lifelong learning theory, the pedagogy…

  7. Work engagement and research output among female and male scientists : A diary study

    NARCIS (Netherlands)

    Dubbelt, L.; Rispens, S.; Demerouti, E.

    2016-01-01

    Women have a minority position within science, technology, engineering, and mathematics and, consequently, are likely to face more adversities at work. This diary study takes a look at a facilitating factor for women's research performance within academia: daily work engagement. We examined the

  8. The Meaning of Work among Chinese University Students: Findings from Prototype Research Methodology

    Science.gov (United States)

    Zhou, Sili; Leung, S. Alvin; Li, Xu

    2012-01-01

    This study examined Chinese university students' conceptualization of the meaning of work. One hundred and ninety students (93 male, 97 female) from Beijing, China, participated in the study. Prototype research methodology (J. Li, 2001) was used to explore the meaning of work and the associations among the identified meanings. Cluster analysis was…

  9. Intersecting Interests: Qualitative Research Synthesis on Art in the Social Work Classroom

    Science.gov (United States)

    Wehbi, Samantha; Cowell, Amanda; Perreault-Laird, Jordyn; El-Lahib, Yahya; Straka, Silvia

    2017-01-01

    This paper reports on a qualitative research synthesis that explored the intersections between art and social work. The scholarship notes a rise in interest in integrating creative arts practices in social work classrooms from assignment design to classroom activities. Also highlighted are the potential contributions of these artsinformed…

  10. Radiochemistry Institute of Karlsruhe Nuclear Research Centre. Progress report on R and D work in 1985

    International Nuclear Information System (INIS)

    1986-02-01

    The Radiochemistry Institute carried out R and D work within the framework of the following projects: Project PWA, Reprocessing and Waste Treatment; project PSB, Fast Breeder Reactor; project PKF, Nuclear Fusion. Basic and applied problems in the field of surface chemistry and surface analysis were studied under the working programme 'Solids and Materials Research', and 'Technology - Man - Environment' was a point of main interest that gathered a number of working programmes in the field of water chemistry. (orig./RB) [de

  11. Potsdam Institute for Climate Impact Research: Computer simulation -climate impact research. Final report

    International Nuclear Information System (INIS)

    1993-07-01

    Climate impact assessment is a new field of research which, owing to international and national efforts to understand and cope with the impending global climate changes on a global, regional and local level, has rapidly become a central field of research of the Federal Ministry of Research and Technology. In contrast to other countries, Germany had no research facilities and infrastructure that could be used. The Potsdam Institute for Climate Impact Research was to provide the infrastructure basis for climate impact research in Germany. The Institute was founded by the BMFT and the Land of Brandenburg. (orig.) [de

  12. Selecting a dynamic simulation modeling method for health care delivery research-part 2: report of the ISPOR Dynamic Simulation Modeling Emerging Good Practices Task Force.

    Science.gov (United States)

    Marshall, Deborah A; Burgos-Liz, Lina; IJzerman, Maarten J; Crown, William; Padula, William V; Wong, Peter K; Pasupathy, Kalyan S; Higashi, Mitchell K; Osgood, Nathaniel D

    2015-03-01

    In a previous report, the ISPOR Task Force on Dynamic Simulation Modeling Applications in Health Care Delivery Research Emerging Good Practices introduced the fundamentals of dynamic simulation modeling and identified the types of health care delivery problems for which dynamic simulation modeling can be used more effectively than other modeling methods. The hierarchical relationship between the health care delivery system, providers, patients, and other stakeholders exhibits a level of complexity that ought to be captured using dynamic simulation modeling methods. As a tool to help researchers decide whether dynamic simulation modeling is an appropriate method for modeling the effects of an intervention on a health care system, we presented the System, Interactions, Multilevel, Understanding, Loops, Agents, Time, Emergence (SIMULATE) checklist consisting of eight elements. This report builds on the previous work, systematically comparing each of the three most commonly used dynamic simulation modeling methods-system dynamics, discrete-event simulation, and agent-based modeling. We review criteria for selecting the most suitable method depending on 1) the purpose-type of problem and research questions being investigated, 2) the object-scope of the model, and 3) the method to model the object to achieve the purpose. Finally, we provide guidance for emerging good practices for dynamic simulation modeling in the health sector, covering all aspects, from the engagement of decision makers in the model design through model maintenance and upkeep. We conclude by providing some recommendations about the application of these methods to add value to informed decision making, with an emphasis on stakeholder engagement, starting with the problem definition. Finally, we identify areas in which further methodological development will likely occur given the growing "volume, velocity and variety" and availability of "big data" to provide empirical evidence and techniques

  13. High-Alpha Research Vehicle (HARV) longitudinal controller: Design, analyses, and simulation resultss

    Science.gov (United States)

    Ostroff, Aaron J.; Hoffler, Keith D.; Proffitt, Melissa S.; Brown, Philip W.; Phillips, Michael R.; Rivers, Robert A.; Messina, Michael D.; Carzoo, Susan W.; Bacon, Barton J.; Foster, John F.

    1994-01-01

    This paper describes the design, analysis, and nonlinear simulation results (batch and piloted) for a longitudinal controller which is scheduled to be flight-tested on the High-Alpha Research Vehicle (HARV). The HARV is an F-18 airplane modified for and equipped with multi-axis thrust vectoring. The paper includes a description of the facilities, a detailed review of the feedback controller design, linear analysis results of the feedback controller, a description of the feed-forward controller design, nonlinear batch simulation results, and piloted simulation results. Batch simulation results include maximum pitch stick agility responses, angle of attack alpha captures, and alpha regulation for full lateral stick rolls at several alpha's. Piloted simulation results include task descriptions for several types of maneuvers, task guidelines, the corresponding Cooper-Harper ratings from three test pilots, and some pilot comments. The ratings show that desirable criteria are achieved for almost all of the piloted simulation tasks.

  14. A Distributed Simulation Facility to Support Human Factors Research in Advanced Air Transportation Technology

    Science.gov (United States)

    Amonlirdviman, Keith; Farley, Todd C.; Hansman, R. John, Jr.; Ladik, John F.; Sherer, Dana Z.

    1998-01-01

    A distributed real-time simulation of the civil air traffic environment developed to support human factors research in advanced air transportation technology is presented. The distributed environment is based on a custom simulation architecture designed for simplicity and flexibility in human experiments. Standard Internet protocols are used to create the distributed environment, linking all advanced cockpit simulator, all Air Traffic Control simulator, and a pseudo-aircraft control and simulation management station. The pseudo-aircraft control station also functions as a scenario design tool for coordinating human factors experiments. This station incorporates a pseudo-pilot interface designed to reduce workload for human operators piloting multiple aircraft simultaneously in real time. The application of this distributed simulation facility to support a study of the effect of shared information (via air-ground datalink) on pilot/controller shared situation awareness and re-route negotiation is also presented.

  15. Simulation of foulant bioparticle topography based on Gaussian process and its implications for interface behavior research

    Science.gov (United States)

    Zhao, Leihong; Qu, Xiaolu; Lin, Hongjun; Yu, Genying; Liao, Bao-Qiang

    2018-03-01

    Simulation of randomly rough bioparticle surface is crucial to better understand and control interface behaviors and membrane fouling. Pursuing literature indicated a lack of effective method for simulating random rough bioparticle surface. In this study, a new method which combines Gaussian distribution, Fourier transform, spectrum method and coordinate transformation was proposed to simulate surface topography of foulant bioparticles in a membrane bioreactor (MBR). The natural surface of a foulant bioparticle was found to be irregular and randomly rough. The topography simulated by the new method was quite similar to that of real foulant bioparticles. Moreover, the simulated topography of foulant bioparticles was critically affected by parameters correlation length (l) and root mean square (σ). The new method proposed in this study shows notable superiority over the conventional methods for simulation of randomly rough foulant bioparticles. The ease, facility and fitness of the new method point towards potential applications in interface behaviors and membrane fouling research.

  16. Facilitating Tough Conversations: Using an Innovative Simulation-Primed Qualitative Inquiry in Pediatric Research.

    Science.gov (United States)

    Wong, Ambrose H; Tiyyagura, Gunjan K; Dodington, James M; Hawkins, Bonnie; Hersey, Denise; Auerbach, Marc A

    Deep exploration of a complex health care issue in pediatrics might be hindered by the sensitive or infrequent nature of a particular topic in pediatrics. Health care simulation builds on constructivist theories to guide individuals through an experiential cycle of action, self-reflection, and open discussion, but has traditionally been applied to the educational domain in health sciences. Leveraging the emotional activation of a simulated experience, investigators can prime participants to engage in open dialogue for the purposes of qualitative research. The framework of simulation-primed qualitative inquiry consists of 3 main iterative steps. First, researchers determine applicability by consideration of the need for an exploratory approach and potential to enrich data through simulation priming of participants. Next, careful attention is needed to design the simulation, with consideration of medium, technology, theoretical frameworks, and quality to create simulated reality relevant to the research question. Finally, data collection planning consists of a qualitative approach and method selection, with particular attention paid to psychological safety of subjects participating in the simulation. A literature review revealed 37 articles that used this newly described method across a variety of clinical and educational research topics and used a spectrum of simulation modalities and qualitative methods. Although some potential limitations and pitfalls might exist with regard to resources, fidelity, and psychological safety under the auspices of educational research, simulation-primed qualitative inquiry can be a powerful technique to explore difficult topics when subjects might experience vulnerability or hesitation. Copyright © 2017 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

  17. Research in biomass production and utilization: Systems simulation and analysis

    Science.gov (United States)

    Bennett, Albert Stewart

    of a mobile juice harvester is not economically viable due to low sugar recovery. The addition of front-end stalk processing/pressing equipment into existing ethanol facilities was found to be economically viable when combined with the plants' use of residuals as a natural gas fuel replacement. Because of high loss of fermentable carbohydrates during ensilage, storage of sweet sorghum in bunkers was not found to be economically viable. The fourth section looks at double cropping winter triticale with late-planted summer corn and compares these scenarios to traditional single cropped corn. Double cropping systems show particular promise for co-production of grain and biomass feedstocks and potentially can allow for greater utilization of grain crop residues. However, additional costs and risks associated with producing two crops instead of one could make biomass-double crops less attractive for producers despite productivity advantages. Detailed evaluation and comparisons show double cropped triticale-corn to be at a significant economic disadvantage relative to single crop corn. The cost benefits associated with using less equipment combined with availability of risk mitigating crop insurance and government subsidies will likely limit farmer interest and clearly indicate that traditional single-crop corn will provide greater financial returns to management. To evaluate the various sweet sorghum, single crop corn and double cropped triticale-corn production scenarios, a detailed but generic model was developed. The primary goal of this generic approach was to develop a modeling foundation that can be rapidly adapted, by an experienced user, to describe new and existing biomass and crop production scenarios that may be of interest to researchers. The foundation model allows input of management practices, crop production characteristics and utilizes standardized machinery performance and cost information, including farm-owned machinery and implements, and machinery and

  18. The Contemporary Academic: Orientation towards Research Work and Researcher Identity of Higher Education Lecturers in the Health Professions

    Science.gov (United States)

    Boyd, Pete; Smith, Caroline

    2016-01-01

    Internationally, the increasing emphasis in universities on the quality of teaching, on student employability and on a corporate approach to entrepreneurial income generation has created a tension around the primacy afforded to published research outputs as a focus for academic work and status. In this study, a framework for academic socialisation…

  19. What Can the Work of Habermas Offer Educational Researcher Development Programmes?

    Science.gov (United States)

    Garland, Paul

    2014-01-01

    Although certain aspects of the work of Habermas have had much influence on emancipatory and action research, this article draws on a wider range of his thinking in order to explore how his ideas can inform the content and process of educational researcher development programmes. Habermas's theory of communicative action, his discourse ethics…

  20. Setting Priorities for Gerontological Social Work Research: A National Delphi Study

    Science.gov (United States)

    Burnette, Denise; Morrow-Howell, Nancy; Chen, Li-Mei

    2003-01-01

    Purpose: An increasingly important task for all disciplines involved in aging research is to identify and prioritize areas for investigation. This article reports the results of a national Delphi study on setting research priorities for gerontological social work. Design and Methods: Delphi methodology, a structured process for eliciting and…

  1. Informal mentoring at work: A review and suggestions for future research

    NARCIS (Netherlands)

    Janssen, Suzanne; van Vuuren, Hubrecht A.; de Jong, Menno D.T.

    2016-01-01

    This paper reviews the literature on informal mentoring at work. Based on two basic premises of interpersonal relationships, it discusses four promising areas in current mentoring research that could be cultivated further by future research. The first premise that we hold is that relationships never

  2. Report for Working Group 1: Design Research in Civil and Environmental Engineering

    DEFF Research Database (Denmark)

    Thompson, Mary Kathryn; Paradisi, Irene

    2013-01-01

    The first 2013 DCEE working group meeting focused on issues associated with design research in civil and environmental engineering. It addressed some of the motivation for establishing design as a research discipline in CEE and some of the challenges and outstanding questions about how to do so....

  3. Financial Aid Research: The Nexus of Academic, Practitioner, and Policy Work

    Science.gov (United States)

    Heller, Donald E.

    2017-01-01

    Academic research often does not find its way into the policy arena because of the nature of the work. Policymakers often find journal articles and academic books too long, difficult to understand, and lacking in policy-relevant ideas and recommendations. This article provides suggestions to academic and other researchers on how to make their…

  4. Foreign-Born Women Faculty Work Roles and Productivity at Research Universities in the United States

    Science.gov (United States)

    Mamiseishvili, Ketevan

    2010-01-01

    Using the data from the 2004 National Study of Postsecondary Faculty (NSOPF:04) survey, the study examined foreign-born women faculty members' work roles and productivity in the areas of teaching, research, and service in comparison with their US-born counterparts at research universities in the US. The findings provided some evidence to suggest…

  5. Imposed Work of Breathing for Flow Meters with In-Line versus Flow-Through Technique during Simulated Neonatal Breathing.

    Directory of Open Access Journals (Sweden)

    Snorri Donaldsson

    Full Text Available The ability to determine airflow during nasal CPAP (NCPAP treatment without adding dead space or resistance would be useful when investigating the physiologic effects of different NCPAP systems on breathing. The aim of this study was to investigate the effect on pressure stability of different flow measuring devices at the in-line and flow-through position, using simulated neonatal breathing.Six different flow measure devices were evaluated by recording pressure changes and imposed work of breathing for breaths with 16 and 32 ml tidal volumes. The tests were performed initially with the devices in an in line position and with 5 and 10 L/min using flow through technique, without CPAP. The flow meters were then subsequently tested with an Infant Flow CPAP system at 3, 5 and 8 cm H2O pressure using flow through technique. The quality of the recorded signals was compared graphically.The resistance of the measuring devices generated pressure swings and imposed work of breathing. With bias flow, the resistance also generated CPAP pressure. Three of the devices had low resistance and generated no changes in pressure stability or CPAP pressure. The two devices intended for neonatal use had the highest measured resistance.The importance of pressure stability and increased work of breathing during non-invasive respiratory support are insufficiently studied. Clinical trials using flow-through technique have not focused on pressure stability. Our results indicate that a flow-through technique might be a way forward in obtaining a sufficiently high signal quality without the added effects of rebreathing and increased work of breathing. The results should stimulate further research and the development of equipment for dynamic flow measurements in neonates.

  6. Imposed Work of Breathing for Flow Meters with In-Line versus Flow-Through Technique during Simulated Neonatal Breathing.

    Science.gov (United States)

    Donaldsson, Snorri; Falk, Markus; Jonsson, Baldvin; Drevhammar, Thomas

    2015-01-01

    The ability to determine airflow during nasal CPAP (NCPAP) treatment without adding dead space or resistance would be useful when investigating the physiologic effects of different NCPAP systems on breathing. The aim of this study was to investigate the effect on pressure stability of different flow measuring devices at the in-line and flow-through position, using simulated neonatal breathing. Six different flow measure devices were evaluated by recording pressure changes and imposed work of breathing for breaths with 16 and 32 ml tidal volumes. The tests were performed initially with the devices in an in line position and with 5 and 10 L/min using flow through technique, without CPAP. The flow meters were then subsequently tested with an Infant Flow CPAP system at 3, 5 and 8 cm H2O pressure using flow through technique. The quality of the recorded signals was compared graphically. The resistance of the measuring devices generated pressure swings and imposed work of breathing. With bias flow, the resistance also generated CPAP pressure. Three of the devices had low resistance and generated no changes in pressure stability or CPAP pressure. The two devices intended for neonatal use had the highest measured resistance. The importance of pressure stability and increased work of breathing during non-invasive respiratory support are insufficiently studied. Clinical trials using flow-through technique have not focused on pressure stability. Our results indicate that a flow-through technique might be a way forward in obtaining a sufficiently high signal quality without the added effects of rebreathing and increased work of breathing. The results should stimulate further research and the development of equipment for dynamic flow measurements in neonates.

  7. Promoting the experimental dialogue between working memory and chunking: Behavioral data and simulation.

    Science.gov (United States)

    Portrat, Sophie; Guida, Alessandro; Phénix, Thierry; Lemaire, Benoît

    2016-04-01

    Working memory (WM) is a cognitive system allowing short-term maintenance and processing of information. Maintaining information in WM consists, classically, in rehearsing or refreshing it. Chunking could also be considered as a maintenance mechanism. However, in the literature, it is more often used to explain performance than explicitly investigated within WM paradigms. Hence, the aim of the present paper was (1) to strengthen the experimental dialogue between WM and chunking, by studying the effect of acronyms in a computer-paced complex span task paradigm and (2) to formalize explicitly this dialogue within a computational model. Young adults performed a WM complex span task in which they had to maintain series of 7 letters for further recall while performing a concurrent location judgment task. The series to be remembered were either random strings of letters or strings containing a 3-letter acronym that appeared in position 1, 3, or 5 in the series. Together, the data and simulations provide a better understanding of the maintenance mechanisms taking place in WM and its interplay with long-term memory. Indeed, the behavioral WM performance lends evidence to the functional characteristics of chunking that seems to be, especially in a WM complex span task, an attentional time-based mechanism that certainly enhances WM performance but also competes with other processes at hand in WM. Computational simulations support and delineate such a conception by showing that searching for a chunk in long-term memory involves attentionally demanding subprocesses that essentially take place during the encoding phases of the task.

  8. Benchmark Simulation of Natural Circulation Cooling System with Salt Working Fluid Using SAM

    Energy Technology Data Exchange (ETDEWEB)

    Ahmed, K. K.; Scarlat, R. O.; Hu, R.

    2017-09-03

    Liquid salt-cooled reactors, such as the Fluoride Salt-Cooled High-Temperature Reactor (FHR), offer passive decay heat removal through natural circulation using Direct Reactor Auxiliary Cooling System (DRACS) loops. The behavior of such systems should be well-understood through performance analysis. The advanced system thermal-hydraulics tool System Analysis Module (SAM) from Argonne National Laboratory has been selected for this purpose. The work presented here is part of a larger study in which SAM modeling capabilities are being enhanced for the system analyses of FHR or Molten Salt Reactors (MSR). Liquid salt thermophysical properties have been implemented in SAM, as well as properties of Dowtherm A, which is used as a simulant fluid for scaled experiments, for future code validation studies. Additional physics modules to represent phenomena specific to salt-cooled reactors, such as freezing of coolant, are being implemented in SAM. This study presents a useful first benchmark for the applicability of SAM to liquid salt-cooled reactors: it provides steady-state and transient comparisons for a salt reactor system. A RELAP5-3D model of the Mark-1 Pebble-Bed FHR (Mk1 PB-FHR), and in particular its DRACS loop for emergency heat removal, provides steady state and transient results for flow rates and temperatures in the system that are used here for code-to-code comparison with SAM. The transient studied is a loss of forced circulation with SCRAM event. To the knowledge of the authors, this is the first application of SAM to FHR or any other molten salt reactors. While building these models in SAM, any gaps in the code’s capability to simulate such systems are identified and addressed immediately, or listed as future improvements to the code.

  9. Karlsruhe Nuclear Research Center, Institute of Neutron Physics and Reactor Engineering. Progress report on research and development work in 1993

    International Nuclear Information System (INIS)

    1994-03-01

    The Institute of Neutron Physics and Reactor Engineering is concerned with research work in the field of nuclear engineering related to the safety of thermal reactors as well as with specific problems of fusion reactor technology. Under the project of nuclear safety research, the Institute works on concepts designed to drastically improve reactor safety. Apart from that, methods to estimate and minimize the radiological consequences of reactor accidents are developed. Under the fusion technology project, the Institute deals with neutron physics and technological questions of the breeding blanket. Basic research covers technico-physical questions of the interaction between light ion radiation of a high energy density and matter. In addition and to a small extent, questions of employing hydrogen in the transport area are studied. (orig.) [de

  10. Sharing Wisdom(s) to Enrich Knowledge: Working in a Transdisciplinary Research Team in Medical Anthropology.

    Science.gov (United States)

    Carceller-Maicas, Natalia

    2015-06-01

    This paper explains our experience working in a transdisciplinary research team focused on adolescence mental health. It introduces briefly the two key theoretical concepts: participation and transdisciplinarity. In order to be followed with a deep description of the methodology and the creation of the two principal materials resulting from our research: a guide of best practices in adolescent mental health, and a documentary film. Showing in a practical way how the research could be enhanced by the sharing of knowledge.

  11. Trust, performance and well-being in Nordic working life and management research

    DEFF Research Database (Denmark)

    Sørensen, Ole Henning; Hasle, Peter; Madsen, Christian Uhrenholdt

    2014-01-01

    In the last decades there has been a growing focus in working life and management research on sustainable organizational development that simultaneously improve organizational outcomes such as productivity and quality and employee outcomes such as well-being and job-satisfaction. Research has...... pointed to trust as an important component of participatory management practices having simultaneous positive outcomes for organizational productivity and employee well-being. The aim of this paper is to establish an overview of the results of Nordic working life and man-agement research inquiring...

  12. Duration of sleep inertia after napping during simulated night work and in extended operations.

    Science.gov (United States)

    Signal, Tracey Leigh; van den Berg, Margo J; Mulrine, Hannah M; Gander, Philippa H

    2012-07-01

    Due to the mixed findings of previous studies, it is still difficult to provide guidance on how to best manage sleep inertia after waking from naps in operational settings. One of the few factors that can be manipulated is the duration of the nap opportunity. The aim of the present study was to investigate the magnitude and time course of sleep inertia after waking from short (20-, 40- or 60-min) naps during simulated night work and extended operations. In addition, the effect of sleep stage on awakening and duration of slow wave sleep (SWS) on sleep inertia was assessed. Two within-subject protocols were conducted in a controlled laboratory setting. Twenty-four healthy young men (Protocol 1: n = 12, mean age = 25.1 yrs; Protocol 2: n = 12, mean age = 23.2 yrs) were provided with nap opportunities of 20-, 40-, and 60-min (and a control condition of no nap) ending at 02:00 h after ∼20 h of wakefulness (Protocol 1 [P1]: simulated night work) or ending at 12:00 h after ∼30 h of wakefulness (Protocol 2 [P2]: simulated extended operations). A 6-min test battery, including the Karolinska Sleepiness Scale (KSS) and the 4-min 2-Back Working Memory Task (WMT), was repeated every 15 min the first hour after waking. Nap sleep was recorded polysomnographically, and in all nap opportunities sleep onset latency was short and sleep efficiency high. Mixed-model analyses of variance (ANOVA) for repeated measures were calculated and included the factors time (time post-nap), nap opportunity (duration of nap provided), order (order in which the four protocols were completed), and the interaction of these terms. Results showed no test x nap opportunity effect (i.e., no effect of sleep inertia) on KSS. However, WMT performance was impaired (slower reaction time, fewer correct responses, and increased omissions) on the first test post-nap, primarily after a 40- or 60-min nap. In P2 only, performance improvement was evident 45 min post-awakening for naps of 40 min or more. In ANOVAs

  13. A critical review of simulation-based medical education research: 2003-2009.

    Science.gov (United States)

    McGaghie, William C; Issenberg, S Barry; Petrusa, Emil R; Scalese, Ross J

    2010-01-01

    This article reviews and critically evaluates historical and contemporary research on simulation-based medical education (SBME). It also presents and discusses 12 features and best practices of SBME that teachers should know in order to use medical simulation technology to maximum educational benefit. This qualitative synthesis of SBME research and scholarship was carried out in two stages. Firstly, we summarised the results of three SBME research reviews covering the years 1969-2003. Secondly, we performed a selective, critical review of SBME research and scholarship published during 2003-2009. The historical and contemporary research synthesis is reported to inform the medical education community about 12 features and best practices of SBME: (i) feedback; (ii) deliberate practice; (iii) curriculum integration; (iv) outcome measurement; (v) simulation fidelity; (vi) skill acquisition and maintenance; (vii) mastery learning; (viii) transfer to practice; (ix) team training; (x) high-stakes testing; (xi) instructor training, and (xii) educational and professional context. Each of these is discussed in the light of available evidence. The scientific quality of contemporary SBME research is much improved compared with the historical record. Development of and research into SBME have grown and matured over the past 40 years on substantive and methodological grounds. We believe the impact and educational utility of SBME are likely to increase in the future. More thematic programmes of research are needed. Simulation-based medical education is a complex service intervention that needs to be planned and practised with attention to organisational contexts.

  14. A synthesis of qualitative research exploring the barriers to staying in work with chronic musculoskeletal pain.

    Science.gov (United States)

    Toye, Francine; Seers, Kate; Allcock, Nick; Briggs, Michelle; Carr, Eloise; Barker, Karen

    2016-01-01

    Qualitative research can help to advance our understanding, management and prevention of work disability. Our aim was to integrate qualitative research findings in order to increase our understanding of barriers to stay in work with chronic pain. We searched five electronic bibliographic databases until September 2012, supplemented by citation tracking and hand-searching. We used meta-ethnography to synthesis our findings. Central to meta-ethnography is identifying “concepts” and developing a conceptual model. Concepts were compared and organised into categories. The following categories can have an impact on the decision to remain in work: struggling to affirm myself as a good worker; balancing life and work in the face of unpredictable symptoms; my work colleagues don't believe me; the system does not facilitate return to work; the battle for legitimacy. Our innovation is to present an internationally relevant model based on a conceptual synthesis. This model highlights the adversarial work experience of people with chronic. The papers span 15 years of qualitative research. A significant finding is that these themes continue to pervade the current work environment for those in pain, and this has clear implications for education, social care and policy. People with chronic pain face an adversarial struggle to maintain their credibility at work. Strategies to maintain personal credibility can have an adverse effect on working lives. Changes at a systems level are needed to facilitate continuance and return to work. Cultural changes in the way that we view people with pain would help to keep people in work.

  15. A review of training research and virtual reality simulators for the da Vinci surgical system.

    Science.gov (United States)

    Liu, May; Curet, Myriam

    2015-01-01

    PHENOMENON: Virtual reality simulators are the subject of several recent studies of skills training for robot-assisted surgery. Yet no consensus exists regarding what a core skill set comprises or how to measure skill performance. Defining a core skill set and relevant metrics would help surgical educators evaluate different simulators. This review draws from published research to propose a core technical skill set for using the da Vinci surgeon console. Publications on three commercial simulators were used to evaluate the simulators' content addressing these skills and associated metrics. An analysis of published research suggests that a core technical skill set for operating the surgeon console includes bimanual wristed manipulation, camera control, master clutching to manage hand position, use of third instrument arm, activating energy sources, appropriate depth perception, and awareness of forces applied by instruments. Validity studies of three commercial virtual reality simulators for robot-assisted surgery suggest that all three have comparable content and metrics. However, none have comprehensive content and metrics for all core skills. INSIGHTS: Virtual reality simulation remains a promising tool to support skill training for robot-assisted surgery, yet existing commercial simulator content is inadequate for performing and assessing a comprehensive basic skill set. The results of this evaluation help identify opportunities and challenges that exist for future developments in virtual reality simulation for robot-assisted surgery. Specifically, the inclusion of educational experts in the development cycle alongside clinical and technological experts is recommended.

  16. Challenges to Social Work research: from academic education to professional practice

    Directory of Open Access Journals (Sweden)

    Aglair Alencar Setubal

    2007-05-01

    Full Text Available The reflections contained in this essay seek to the call attention of professionals, professors and students of Social Work to the importance of research in the various contexts of activity in this field, despite the challenges and difficulties presented in its realization. It offers possibilities for conducting research from a critical professional intervention, in keeping with the concrete reality - the context of professional practice. It also highlights the importance for the preparation of a history of Social Work based on theoretical-methodological postures that consider the wealth, complexity and essence of reality, breaking with the 'pseudoconcreticity', with the utilitarian, manipulative praxis that is constructed in the dimension of a 'common consciousness'. Despite the importance attributed to research, it sought to avoid separating it from human-social reality, given that it is in this context that research acquires meaning, becomes accepted and considers the needs of Social Work as a historic profession.

  17. Dialectic between conceptual and causal inquiry in psychosocial work-environment research.

    Science.gov (United States)

    Johnson, J V; Hall, E M

    1996-10-01

    In this article, the authors discuss the ongoing tension between etiologically oriented research--particularly that focused on the demand-control model--and the need to conceptually expand the work stress field to include gender and class-specific exposure contexts. Epidemiological research on the effects of low levels of work control is critically reviewed, and new methods of long-term psychosocial work-exposure assessment are presented. The process of conceptually expanding the demand-control model is discussed with respect to including other important variables, such as work-related social support, and specifying the nature of the gendered work process that involves developing new concepts and measures of the invisible and emotional labor often performed by women.

  18. Seventeen years of human trafficking research in social work: A review of the literature.

    Science.gov (United States)

    Okech, David; Choi, Y Joon; Elkins, Jennifer; Burns, Abigail C

    2018-01-01

    The trafficking of persons around the world is a serious violation of human rights and manifestation of social injustice. It disproportionately affects women and children worldwide. Given the values of the social work profession and the prevalence of trafficking, it is essential to understand the current literature on human trafficking in social work journals. Using the PRISMA method, this systematic review (n = 94 articles) of human trafficking in social work journals found the following: more focus on sex trafficking than other forms of trafficking; a lack of a clear conceptualization and definition on the entire spectrum of trafficking; a lack of evidence-informed empirical research to inform programs, practice, and policy; and a dearth of recommendations for social work education. Specific implications for social work policy, research, practice, and education are highlighted and discussed.

  19. Collaborative ethnography for information systems research Studying knowledge work practices and designing supportive information systems

    Directory of Open Access Journals (Sweden)

    Ronald Maier

    2012-04-01

    Full Text Available Understanding knowledge work and supporting it with information systems (ISs are challenging tasks. Knowledge work has changed substantially recently and studies on how knowledge work is currently performed are scarce. Ethnography is the most suitable qualitative research method for studying knowledge work, yet too time-consuming, costly and unfocused for the fast changing IS domain. Moreover, results from qualitative studies need to be transformed into artefacts useful for IS requirements engineering and design. This paper proposes a procedure for collaborative ethnography to study knowledge work practices and inform IS requirements gathering and design illustrated with the case of a collaborative ethnographic study of seven organisations in four European countries performed in a large-scale international IS research and development project. The paper also critically discusses the procedure’s applicability and limitations.

  20. Mixed-field GCR Simulations for Radiobiological Research using Ground Based Accelerators

    Science.gov (United States)

    Kim, Myung-Hee Y.; Rusek, Adam; Cucinotta, Francis

    Space radiation is comprised of a large number of particle types and energies, which have differential ionization power from high energy protons to high charge and energy (HZE) particles and secondary neutrons produced by galactic cosmic rays (GCR). Ground based accelerators such as the NASA Space Radiation Laboratory (NSRL) at Brookhaven National Laboratory (BNL) are used to simulate space radiation for radiobiology research and dosimetry, electronics parts, and shielding testing using mono-energetic beams for single ion species. As a tool to support research on new risk assessment models, we have developed a stochastic model of heavy ion beams and space radiation effects, the GCR Event-based Risk Model computer code (GERMcode). For radiobiological research on mixed-field space radiation, a new GCR simulator at NSRL is proposed. The NSRL-GCR simulator, which implements the rapid switching mode and the higher energy beam extraction to 1.5 GeV/u, can integrate multiple ions into a single simulation to create GCR Z-spectrum in major energy bins. After considering the GCR environment and energy limitations of NSRL, a GCR reference field is proposed after extensive simulation studies using the GERMcode. The GCR reference field is shown to reproduce the Z and LET spectra of GCR behind shielding within 20 percents accuracy compared to simulated full GCR environments behind shielding. A major challenge for space radiobiology research is to consider chronic GCR exposure of up to 3-years in relation to simulations with cell and animal models of human risks. We discuss possible approaches to map important biological time scales in experimental models using ground-based simulation with extended exposure of up to a few weeks and fractionation approaches at a GCR simulator.

  1. Rainfall simulators in hydrological and geomorphological sciences: benefits, applications and future research directions

    Science.gov (United States)

    Iserloh, Thomas; Cerdà, Artemi; Fister, Wolfgang; Seitz, Steffen; Keesstra, Saskia; Green, Daniel; Gabriels, Donald

    2017-04-01

    Rainfall simulators are used extensively within the hydrological and geomorphological sciences and provide a useful investigative tool to understand many processes, such as: (i) plot-scale runoff, infiltration and erosion; (ii) irrigation and crop management, and; (iii) investigations into flooding within a laboratory setting. Although natural rainfall is desirable as it represents actual conditions in a given geographic location, data acquisition relying on natural rainfall is often hindered by its unpredictable nature. Furthermore, rainfall characteristics such as the intensity, duration, drop size distribution and kinetic energy cannot be spatially or temporally regulated or repeated between experimentation. Rainfall simulators provide a suitable method to overcome the issues associated with depending on potentially erratic and unpredictable natural rainfall as they allow: (i) multiple measurements to be taken quickly without waiting for suitable natural rainfall conditions; (ii) the simulation of spatially and/or temporally controlled rainfall patterns over a given plot area, and; (iii) the creation of a closed environment, allowing simplified measurement of input and output conditions. There is no standardisation of rainfall simulation and as such, rainfall simulators differ in their design, rainfall characteristics and research application. Although this impedes drawing meaningful comparisons between studies, this allows researchers to create a bespoke and tailored rainfall simulator for the specific research application. This paper summarises the rainfall simulators used in European research institutions (Universities of Trier, Valencia, Basel, Tuebingen, Wageningen, Loughborough and Ghent) to investigate a number of hydrological and geomorphological issues and includes details on the design specifications (such as the extent and characteristics of simulated rainfall), as well as a discussion of the purpose and application of the rainfall simulator.

  2. One hundred years of work design research: Looking back and looking forward.

    Science.gov (United States)

    Parker, Sharon K; Morgeson, Frederick P; Johns, Gary

    2017-03-01

    In this article we take a big picture perspective on work design research. In the first section of the paper we identify influential work design articles and use scientific mapping to identify distinct clusters of research. Pulling this material together, we identify five key work design perspectives that map onto distinct historical developments: (a) sociotechnical systems and autonomous work groups, (b) job characteristics model, (c) job demands-control model, (d) job demands-resources model, and (e) role theory. The grounding of these perspectives in the past is understandable, but we suggest that some of the distinction between clusters is convenient rather than substantive. Thus we also identify contemporary integrative perspectives on work design that build connections across the clusters and we argue that there is scope for further integration. In the second section of the paper, we review the role of Journal of Applied Psychology ( JAP ) in shaping work design research. We conclude that JAP has played a vital role in the advancement of this topic over the last 100 years. Nevertheless, we suspect that to continue to play a leading role in advancing the science and practice of work design, the journal might need to publish research that is broader, more contextualized, and team-oriented. In the third section, we address the impact of work design research on: applied psychology and management, disciplines beyond our own, management thinking, work practice, and national policy agendas. Finally, we draw together observations from our analysis and identify key future directions for the field. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  3. Employees as Individually and Collectively Acting Subjects—Key Contributions from Nordic Working Life Research

    Directory of Open Access Journals (Sweden)

    Peter Hasle

    2013-09-01

    Full Text Available The Nordic countries—Denmark, Finland, Iceland, Norway, and Sweden—are societies that share many features among themselves that also distinguish them from other industrialized countries. The paper poses the question whether the distinct character of the Nordic societies has generated working life research that is clearly distinguishable from similar research in other countries in terms of distinctness in topics, methods, empirical findings, or theoretical concepts. The aim of this paper is to answer this question by identifying, analyzing, and discussing selected key contributions from Nordic working life research to understand how they research and construe the conditions of humans at work with a special focus on the psychosocial well-being of industrial workers. The paper concludes that the key contributions to Nordic working life research have a distinctive emphasis on collective employee voice and autonomy and an extensive use of empirical and actionoriented research methods. Employees are construed not only as workers resisting exploitations from management or as workers pursuing individual careers, but also as members of collectives who share ideas and aspirations and who legitimately influence the management (and research using cooperation and pressure.

  4. Wellness and multiple sclerosis: The National MS Society establishes a Wellness Research Working Group and research priorities.

    Science.gov (United States)

    Motl, Robert W; Mowry, Ellen M; Ehde, Dawn M; LaRocca, Nicholas G; Smith, Kathy E; Costello, Kathleen; Shinto, Lynne; Ng, Alexander V; Sullivan, Amy B; Giesser, Barbara; McCully, Kevin K; Fernhall, Bo; Bishop, Malachy; Plow, Matthew; Casaccia, Patrizia; Chiaravalloti, Nancy D

    2018-03-01

    People with multiple sclerosis (MS) have identified "wellness" and associated behaviors as a high priority based on "social media listening" undertaken by the National MS Society (i.e. the Society). The Society recently convened a group that consisted of researchers with experience in MS and wellness-related research, Society staff members, and an individual with MS for developing recommendations regarding a wellness research agenda. The members of the group engaged in focal reviews and discussions involving the state of science within three approaches for promoting wellness in MS, namely diet, exercise, and emotional wellness. That process informed a group-mediated activity for developing and prioritizing research goals for wellness in MS. This served as a background for articulating the mission and objectives of the Society's Wellness Research Working Group. The primary mission of the Wellness Research Working Group is the provision of scientific evidence supporting the application of lifestyle, behavioral, and psychosocial approaches for promoting optimal health of mind, body, and spirit (i.e. wellness) in people with MS as well as managing the disease and its consequences.

  5. The JINR Tier1 Site Simulation for Research and Development Purposes

    Directory of Open Access Journals (Sweden)

    Korenkov V.

    2016-01-01

    A system for grid and cloud services simulation is developed at LIT (JINR, Dubna. This simulation system is focused on improving the effciency of the grid/cloud structures development by using the work quality indicators of some real system. The development of such kind of software is very important for making a new grid/cloud infrastructure for such big scientific experiments like the JINR Tier1 site for WLCG. The simulation of some processes of the Tier1 site is considered as an example of our application approach.

  6. SCIENTIFIC-RESEARCH WORK OF STUDENTS IN ORGANIZATIONS OF SECONDARY VOCATIONAL EDUCATION

    Directory of Open Access Journals (Sweden)

    Natalya O. Vaganova

    2016-01-01

    Full Text Available The aim of the study is to reveal features and possibilities of research work in the organizations of secondary professional education. Methods. Theoretical methods involve analysis of legislative, normative documents; comparison and generalization of the findings of scientists on research activities. Empirical methods: pedagogical observation, to study the experience of organization of research work. Results. The definition of «research ability» is proposed; the system of organization of research activity in the organization of secondary vocational education, including the identification of approaches to the concept of «research» is developed; development of a program of research skills formation is given; definition of subjective functional relationships for the implementation of the programmer of research; the development of training programs for teaching staff the organization of the secondary professional education to the organization and conduct of research activities with students; creation of innovative infrastructure as a set of resources and means to ensure the maintenance of research activities. Scientific novelty. An attempt to fill the gaps in the methodology of organization of research activity in organizations of secondary vocational education is taken. Peculiarities of the educational programs of secondary vocational education, defining the forms of research activities are disclosed. Approaches to the concept of «research», the formation of research skills and development of professional-pedagogical competences of teachers as subjects of research activities are proposed. Practical significance. The use of suggested approaches to conducting research in organizations of secondary vocational education can increase the level of students and extend the functionality of teachers. 

  7. Quality in Modern Nordic Working Life—Investigating Three Related Research Perspectives and Their Possible Cross-Fertilization

    OpenAIRE

    Stine Jacobsen; Pia Bramming; Helle Holt; Henrik Holt Larsen

    2013-01-01

    Nordic working life balance is important in the context of a highly developed welfare state, budget collaboration between the State and municipalities, and a unified labor movement. In working life studies, various research perspectives create meaning around and propose solutions for the many quality issues of modern working life. Welfare research, working environment research, and human resource management (HRM) research attack the multiple challenges of working life in different ways and sh...

  8. Cognitive functioning, aging, and work: A review and recommendations for research and practice.

    Science.gov (United States)

    Fisher, Gwenith G; Chaffee, Dorey S; Tetrick, Lois E; Davalos, Deana B; Potter, Guy G

    2017-07-01

    There is a larger proportion and number of older adults in the labor force than ever before. Furthermore, older adults in the workforce are working until later ages. Although a great deal of research has examined physical health and well-being of working older adults, less research has focused on cognitive functioning. The purpose of this article is to provide a broad contemporary and multidisciplinary review of the intersection between cognitive functioning, aging, and work as a follow-up to a paper previously written by Fisher et al. (2014). We begin by providing definitions and background about cognitive functioning and how it changes over the life span. Next we discuss theories relevant to the intersection of cognitive functioning and work, including the use-it-or-lose-it hypothesis, the cognitive reserve hypothesis, hypotheses regarding environmental influences on intellectual functioning, and the job-demands-resources model. Then we summarize recent research about the effects of work on cognitive functioning, as well as ways that cognitive functioning may influence work motivation, learning, development, training, and safety. We conclude by emphasizing the importance of person-environment fit, suggesting avenues for future research, and discussing practical implications for the field of occupational health psychology. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  9. Video conferencing versus telephone calls for team work across hospitals: a qualitative study on simulated emergencies

    Directory of Open Access Journals (Sweden)

    Hagen Oddvar

    2009-11-01

    Full Text Available Abstract Background Teamwork is important for patient care and outcome in emergencies. In rural areas, efficient communication between rural hospitals and regional trauma centers optimise decisions and treatment of trauma patients. Little is known on potentials and effects of virtual team to team cooperation between rural and regional trauma teams. Methods We adapted a video conferencing (VC system to the work process between multidisciplinary teams responsible for trauma as well as medical emergencies between one rural and one regional (university hospital. We studied how the teams cooperated during simulated critical scenarios, and compared VC with standard telephone communication. We used qualitative observations and interviews to evaluate results. Results The team members found VC to be a useful tool during emergencies and for building "virtual emergency teams" across distant hospitals. Visual communication combined with visual patient information is superior to information gained during ordinary telephone calls, but VC may also cause interruptions in the local teamwork. Conclusion VC can improve clinical cooperation and decision processes in virtual teams during critical patient care. Such team interaction requires thoughtful organisation, training, and new rules for communication.

  10. Rapid resetting of human peripheral clocks by phototherapy during simulated night shift work.

    Science.gov (United States)

    Cuesta, Marc; Boudreau, Philippe; Cermakian, Nicolas; Boivin, Diane B

    2017-11-24

    A majority of night shift workers have their circadian rhythms misaligned to their atypical schedule. While bright light exposure at night is known to reset the human central circadian clock, the behavior of peripheral clocks under conditions of shift work is more elusive. The aim of the present study was to quantify the resetting effects of bright light exposure on both central (plasma cortisol and melatonin) and peripheral clocks markers (clock gene expression in peripheral blood mononuclear cells, PBMCs) in subjects living at night. Eighteen healthy subjects were enrolled to either a control (dim light) or a bright light group. Blood was sampled at baseline and on the 4 th day of simulated night shift. In response to a night-oriented schedule, the phase of PER1 and BMAL1 rhythms in PBMCs was delayed by ~2.5-3 h (P shift was observed for the other clock genes and the central markers. Three cycles of 8-h bright light induced significant phase delays (P night-oriented schedule and a rapid resetting effect of nocturnal bright light exposure on peripheral clocks.

  11. Precursor evolution and SCC initiation of cold-worked alloy 690 in simulated PWR primary water

    Energy Technology Data Exchange (ETDEWEB)

    Zhai, Ziqing; Kruska, Karen; Toloczko, Mychailo B.; Bruemmer, Stephen M.

    2017-03-27

    Stress corrosion crack initiation of two thermally-treated, cold-worked (CW) alloy 690 materials was investigated in 360oC simulated PWR primary water using constant load tensile (CLT) tests and blunt notch compact tension (BNCT) tests equipped with direct current potential drop (DCPD) for in-situ detection of cracking. SCC initiation was not detected by DCPD for the 21% and 31%CW CLT specimens loaded at their yield stress after ~9,220 h, however intergranular (IG) precursor damage and isolated surface cracks were observed on the specimens. The two 31%CW BNCT specimens loaded at moderate stress intensity after several cyclic loading ramps showed DCPD-indicated crack initiation after 10,400h exposure at constant stress intensity, which resulted from significant growth of IG cracks. The 21%CW BNCT specimens only exhibited isolated small IG surface cracks and showed no apparent DCPD change throughout the test. Interestingly, post-test cross-section examinations revealed many grain boundary (GB) nano-cavities in the bulk of all the CLT and BNCT specimens particularly for the 31%CW materials. Cavities were also found along GBs extending to the surface suggesting an important role in crack nucleation. This paper provides an overview of the evolution of GB cavities and will discuss their effects on crack initiation in CW alloy 690.

  12. Fatigue Life Prediction in Rapid Die Casting - Preliminary Work in View of Current Research

    International Nuclear Information System (INIS)

    Chuan Huat Ng; Grote, Karl-Heinrich; Baehr, Ruediger

    2007-01-01

    Numerical simulation technique as a prediction tool is slowly adopted in metal casting industry for predicting design modelling solidification analysis. The reasons for this activity is found in the need to further enhance the geometrical design and mechanical properties of the tool design and the correct prediction methodology to fulfil industrial needs. The present state of numerical simulation capabilities in rapid die casting technologies is reviewed and the failure mode mechanisms of thermal fatigue, aimed at developing a numerical simulation with a systematic design guidance for predicting the thermal cyclic loading analysis and improvement is presented along with several other methods. The economic benefits of a numerical simulation technique in die casting are limited to tool life time, mechanical properties and design guidance. The extensive computer capabilities of a numerical simulation with a systematic design guidance methodology are exploited to provide a solution for flexible design, mechanical properties and mould life time. Related research carried out worldwide by different organisations and academic institutions are discussed

  13. Using social simulation to explore the dynamics at stake in participatory research

    OpenAIRE

    Barreteau, Olivier; Le Page, Christophe

    2011-01-01

    This position paper contributes to the debate on perspectives for simulating the social processes of science through the specific angle of participatory research. This new way of producing science is still in its infancy and needs some step back and analysis, to understand what is taking place on the boundaries between academic, policy and lay worlds. We argue that social simulation of this practice of cooperation can help in understanding further this new way of doing science, building on ex...

  14. Retail food environments research: Promising future with more work to be done.

    Science.gov (United States)

    Fuller, Daniel; Engler-Stringer, Rachel; Muhajarine, Nazeem

    2016-06-09

    As members of the scientific committee for the Food Environments in Canada conference, we reflect on the current state of food environments research in Canada. We are very encouraged that the field is growing and there have been many collaborative efforts to link researchers in Canada, including the 2015 Food Environments in Canada Symposium and Workshop. We believe there are 5 key challenges the field will need to collectively address: theory and causality; replication and extension; consideration of rural, northern and vulnerable populations; policy analysis; and intervention research. In addressing the challenges, we look forward to working together to conduct more sophisticated, complex and community-driven food environments research in the future.

  15. Online and face-to-face role-play simulations in promoting social work students’ argumentative problem solving

    Directory of Open Access Journals (Sweden)

    Kati Vapalahti

    2015-03-01

    Full Text Available This paper reports on a teaching experiment in which social work students (n=38 practiced problem solving through argumentative tasks. A teaching experiment was carried out at a Mikkeli University of Applied Sciences in Finland in connection with a course concerning preventative work against alcohol- and drug abuse. This quasi- experimental study investigated whether role-play simulation conducted either online (15 students or face-to-face (14 students improved students’ problem solving on social issues. As a pre-test, the students wrote an essay after having watched a dramatization of problematic cases on elderly people’s use of alcohol. The students also attended lectures (30 x 45 min on the effect of substance abuse and preventive work, and after the role-play simulation they wrote another essay (post-test. Nine controls wrote an essay without participating in the role-play simulation. Lastly, the students filled out feedback questionnaires.

  16. [High fidelity simulation : a new tool for learning and research in pediatrics].

    Science.gov (United States)

    Bragard, I; Farhat, N; Seghaye, M-C; Schumacher, K

    2016-10-01

    Caring for a sick child represents a high risk activity that requires technical and non-technical skills related to several factors such as the rarity of certain events or the stress of caring for a child. As regard these conditions, medi¬cal simulation provides a learning environment without risk, the control of variables, the reproducibility of situations, and the confrontation with rare events. In this article, we des¬cribe the steps of a simulation session and outline the current knowledge of the use of simulation in paediatrics. A session of simulation includes seven phases following the model of Peter Dieckmann, particularly the scenario and the debriefing that form the heart of the learning experience. Several studies have shown the advantages of simulation for paediatric trai¬ning in terms of changes in attitudes, skills and knowledge. Some studies have demonstrated a beneficial transfer to prac¬tice. In conclusion, simulation provides great potential for training and research in paediatrics. The establishment of a collaborative research program by the whole simulation com¬munity would help ensure that this type of training improves the quality of care.

  17. Experimental and calculational works on characteristics of the Dalat Nuclear Research Reactor. Second edition

    International Nuclear Information System (INIS)

    Pham Ngoc Khoi; Nguyen Kim Dung

    2016-03-01

    Recognizing the significant value and necessity of publishing the scientific document of experimental and calculational works on the Dalat Nuclear Research Reactor (DNRR) physics and engineering for research, operation, training activities as well as for international scientific exchange, Vietnam Atomic Energy Agency (VAEA) and Vietnam Atomic Energy Institute have completed editing to publish the “Experimental and Calculational Works on Characteristics of THE DALAT NUCLEAR RESEARCH REACTOR” which consists of 26 typical papers representing the most important experimental and calculational results of the DNRR physics and engineering obtained during 30 years of operation and exploitation with the contribution of Vietnamese and former USSR’s experts, especially scientists and engineers working at the Reactor Center of the NRI

  18. Using Technology to Evaluate a Web-Based Clinical Social Work Research Course

    Directory of Open Access Journals (Sweden)

    Zvi Gellis

    2004-05-01

    Full Text Available This article reports on a clinical research methods course taught online to a total of 90 off-campus MSW students in the fall of 1999, 2000, and 2001. The course was taught in a mid-size public university in a CSWE-accredited School of Social Work. The purpose of the course was to teach single subject design research skills for the evaluation of clinical social work practice. The student experience of the online course was assessed using qualitative interviews that add a deeper, textured understanding of the various facets of online instruction from the learner's perspective. Important dimensions for social work instruction in online courseware were delineated. A collaborative learning and teaching framework is presented for those social work educators interested in implementing web-based courses.

  19. Work-life balance of nursing faculty in research- and practice-focused doctoral programs.

    Science.gov (United States)

    Smeltzer, Suzanne C; Sharts-Hopko, Nancy C; Cantrell, Mary Ann; Heverly, Mary Ann; Jenkinson, Amanda; Nthenge, Serah

    2015-01-01

    The growing shortage of nursing faculty and the need for faculty to teach doctoral students to address the shortage call for examination of factors that may contribute to the shortage, including those that are potentially modifiable, including work-life balance.This descriptive study examined work-life balance of a national sample of nursing faculty teaching in research-focused and practice-focused doctoral programs. Data were collected through an online survey of 554 doctoral program faculty members to identify their perceptions of work-life balance and predictors of work-life balance. Work-life balance scores indicated better work-life balance than expected. Factors associated with good work-life balance included higher academic rank, having tenure, older age, years in education, current faculty position, and no involvement in clinical practice. Current faculty position was the best predictor of work-life balance. Although work-life balance was viewed positively by study participants, efforts are needed to strengthen factors related to positive work/life in view of the increasing workload of doctoral faculty as the numbers of doctoral students increase and the number of seasoned faculty decrease with anticipated waves of retirements. Copyright © 2015 Elsevier Inc. All rights reserved.

  20. Science and Mathematics Teachers Working Toward Equity Through Teacher Research: Tracing Changes Across Their Research Process and Equity Views

    Science.gov (United States)

    Brenner, Mary E.; Bianchini, Julie A.; Dwyer, Hilary A.

    2016-12-01

    We investigated secondary science and mathematics teachers engaged in a two-and-a-half-year professional development effort focused on equity. We examined how teachers conducting research on their own instructional practices—a central learning strategy of the professional development project—informed and/or constrained their views related to three strands of equity: teachers and teaching, students and learning, and students' families and communities. Data collected included recordings of professional development seminars and school-site meetings, three sets of individual interviews with teacher researchers, and drafts and final products of the classroom research teachers conducted. From our qualitative analyses of data, we found that most teachers addressed at least two of the three equity strands in researching their own practice. We also found that most transformed their understandings of teachers and students as a result of their teacher research process. However, teachers' views of families and communities changed in less substantive ways. We close with recommendations for other researchers and professional developers intent on supporting science and mathematics teachers in using teacher research to work toward equity.

  1. Evaluation of the work of hospital districts' research ethics committees in Finland.

    Science.gov (United States)

    Halila, Ritva

    2014-12-01

    The main task of research ethics committees (RECs) is to assess research studies before their start. In this study, 24 RECs that evaluate medical research were sent questionnaires about their structure and functions. The RECs were divided into two separate groups: those working in university hospital districts (uRECs) and those in central hospital districts (non-uRECs). The two groups were different in many respects: the uRECs were bigger in size, covered a wider range of disciplines (both medical and non-medical), had better resources and more frequent and regular meetings. After the survey was performed and analysed, the Medical Research Act was amended so that only hospital districts with a medical faculty in their region had a duty to establish ethics committees. After the amendment, the number of RECs evaluating medical research in Finland decreased from 25 to 9. The ethics committees that remained had wider expertise and were better equipped already by the time of this survey. Only one non-uREC was continuing its work, and this was being done under the governance of a university hospital district. Simple measures were used for qualitative analysis of the work of RECs that evaluate medical research. These showed differences between RECs. This may be helpful in establishing an ethics committee network in a research field or administrational area. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  2. Work-life balance in academic medicine: narratives of physician-researchers and their mentors.

    Science.gov (United States)

    Strong, Erin A; De Castro, Rochelle; Sambuco, Dana; Stewart, Abigail; Ubel, Peter A; Griffith, Kent A; Jagsi, Reshma

    2013-12-01

    Leaders in academic medicine are often selected from the ranks of physician-researchers, whose demanding careers involve multiple professional commitments that must also be balanced with demands at home. To gain a more nuanced understanding of work-life balance issues from the perspective of a large and diverse group of faculty clinician-researchers and their mentors. A qualitative study with semi-structured, in-depth interviews conducted from 2010 to 2011, using inductive analysis and purposive sampling. One hundred former recipients of U.S. National Institutes of Health (NIH) K08 or K23 career development awards and 28 of their mentors. Three researchers with graduate training in qualitative methods conducted the interviews and thematically coded verbatim transcripts. Five themes emerged related to work-life balance: (1) the challenge and importance of work-life balance for contemporary physician-researchers, (2) how gender roles and spousal dynamics make these issues more challenging for women, (3) the role of mentoring in this area, (4) the impact of institutional policies and practices intended to improve work-life balance, and (5) perceptions of stereotype and stigma associated with utilization of these programs. In academic medicine, in contrast to other fields in which a lack of affordable childcare may be the principal challenge, barriers to work-life balance appear to be deeply rooted within professional culture. A combination of mentorship, interventions that target institutional and professional culture, and efforts to destigmatize reliance on flexibility (with regard to timing and location of work) are most likely to promote the satisfaction and success of the new generation of clinician-researchers who desire work-life balance.

  3. Research

    African Journals Online (AJOL)

    A descriptive qualitative research design was used to determine whether participants ... simulation as a teaching method; a manikin offering effective learning; confidence ..... Tesch R. Qualitative Research: Analysis Types and Software Tools.

  4. Simulation of obstacles’ effect on industrial robots’ working space using genetic algorithm

    Directory of Open Access Journals (Sweden)

    M.F. Aly

    2014-07-01

    Full Text Available The study of robot workspace is an interesting problem since its applications are directly related to industry. However, it involves several mathematical complications; Thus, many of the arising questions are left without a definite answer. With the motivation of industrial demand, the need for finding better answers than the existing ones lasts. The workspace (WS determination of a robot with general structural parameters is a complex problem, which cannot be solved in an explicit way. Closed form solutions are only available in some particular cases. Otherwise, computational algorithms and numerical techniques are used. The task becomes even much more complicated by the presence of obstacles in the robot accessible region. Obstacle presence does not only exclude points from the original WS but it affects the whole robot workspace’s shape and size to the extent that it sometimes divides the working space in two or more separate regions that cannot be linked by the same robot. Much research work in the literature is directed toward path planning in the presence of obstacles without having to determine the robot WS. However, a real situation in industry occurs when the knowledge of the WS is of importance in facility layout. This paper presents an approach for the estimation of a generic open-chain robot in the presence of obstacles with any desired number of prismatic and/or revolute joints of any order. Joints’ axes may have any orientation relative to each other. The robot can be placed in free space or in a work cell consisting of a set of Computer Numerically Controlled (CNC machines and some obstacles.

  5. Simulations

    CERN Document Server

    Ngada, Narcisse

    2015-06-15

    The complexity and cost of building and running high-power electrical systems make the use of simulations unavoidable. The simulations available today provide great understanding about how systems really operate. This paper helps the reader to gain an insight into simulation in the field of power converters for particle accelerators. Starting with the definition and basic principles of simulation, two simulation types, as well as their leading tools, are presented: analog and numerical simulations. Some practical applications of each simulation type are also considered. The final conclusion then summarizes the main important items to keep in mind before opting for a simulation tool or before performing a simulation.

  6. Structure design and simulation research of active magnetic bearing for helium centrifugal cold compressor

    Science.gov (United States)

    Y Zhang, S.; Pan, W.; Wei, C. B.; Wu, J. H.

    2017-12-01

    Helium centrifugal cold compressors are utilized to pump gaseous helium from saturated liquid helium tank to obtain super-fluid helium in cryogenic refrigeration system, which is now being developed at TIPC, CAS. Active magnetic bearing (AMB) is replacing traditional oil-fed bearing as the optimal supporting assembly for cold compressor because of its many advantages: free of contact, high rotation speed, no lubrication and so on. In this paper, five degrees of freedom for AMB are developed for the helium centrifugal cold compressor application. The structure parameters of the axial and radial magnetic bearings as well as hardware and software of the electronic control system is discussed in detail. Based on modal analysis and critical speeds calculation, a control strategy combining PID arithmetic with other phase compensators is proposed. Simulation results demonstrate that the control method not only stables AMB system but also guarantees good performance of closed-loop behaviour. The prior research work offers important base and experience for test and application of AMB experimental platform for system centrifugal cold compressor.

  7. What We Call What We Do Affects How We Do It: A New Nomenclature for Simulation Research in Medical Education

    Science.gov (United States)

    Haji, Faizal A.; Hoppe, Daniel J.; Morin, Marie-Paule; Giannoulakis, Konstantine; Koh, Jansen; Rojas, David; Cheung, Jeffrey J. H.

    2014-01-01

    Rapid technological advances and concern for patient safety have increased the focus on simulation as a pedagogical tool for educating health care providers. To date, simulation research scholarship has focused on two areas; evaluating instructional designs of simulation programs, and the integration of simulation into a broader educational…

  8. Application of productive research tasks in working with gifted students in teaching Serbian language and literature

    Directory of Open Access Journals (Sweden)

    Stakić Mirjana M.

    2015-01-01

    Full Text Available In the work we examine the possibility of application of productive research tasks in working with gifted students in teaching Serbian language and literature. Using specific examples of interpretations of literary works we show that productive research assignments encourage students' creative and inventive expression, creativity, imagination and criticality and enable them to develop in accordance with their personality, individual preferences and abilities. In the examples of their use in problem solving, we determine how productive research tasks are conducive to gifted students who need to learn through problem solving and school work and to experience learning as a challenge. They present the basis for independent research, which allows gifted students to express their own creativity and the need to acquire new, challenging knowledge, and represent a powerful motivational tool that teachers can use in order to further develop their talent. Creative application of the productive research tasks in teaching Serbian language and literature is the possibility that the education of gifted students is not treated as elitist question, but to transform teaching process into development of giftedness and talent, where the role of the teacher in the teaching process rises to the role of the mentor.

  9. Intercomparison of Streamflow Simulations between WRF-Hydro and Hydrology Laboratory-Research Distributed Hydrologic Model Frameworks

    Science.gov (United States)

    KIM, J.; Smith, M. B.; Koren, V.; Salas, F.; Cui, Z.; Johnson, D.

    2017-12-01

    The National Oceanic and Atmospheric Administration (NOAA)-National Weather Service (NWS) developed the Hydrology Laboratory-Research Distributed Hydrologic Model (HL-RDHM) framework as an initial step towards spatially distributed modeling at River Forecast Centers (RFCs). Recently, the NOAA/NWS worked with the National Center for Atmospheric Research (NCAR) to implement the National Water Model (NWM) for nationally-consistent water resources prediction. The NWM is based on the WRF-Hydro framework and is run at a 1km spatial resolution and 1-hour time step over the contiguous United States (CONUS) and contributing areas in Canada and Mexico. In this study, we compare streamflow simulations from HL-RDHM and WRF-Hydro to observations from 279 USGS stations. For streamflow simulations, HL-RDHM is run on 4km grids with the temporal resolution of 1 hour for a 5-year period (Water Years 2008-2012), using a priori parameters provided by NOAA-NWS. The WRF-Hydro streamflow simulations for the same time period are extracted from NCAR's 23 retrospective run of the NWM (version 1.0) over CONUS based on 1km grids. We choose 279 USGS stations which are relatively less affected by dams or reservoirs, in the domains of six different RFCs. We use the daily average values of simulations and observations for the convenience of comparison. The main purpose of this research is to evaluate how HL-RDHM and WRF-Hydro perform at USGS gauge stations. We compare daily time-series of observations and both simulations, and calculate the error values using a variety of error functions. Using these plots and error values, we evaluate the performances of HL-RDHM and WRF-Hydro models. Our results show a mix of model performance across geographic regions.

  10. Charity work of men sentenced to imprisonment in Lower Silesia – a research report

    Directory of Open Access Journals (Sweden)

    Emilia Sokołowska

    2017-12-01

    Full Text Available The article is devoted to the subject of charity work of men serving prison sentences in the District Inspectorate of Prison Service in Wrocław. The aim is to present the importance of charity work and to show how it can be used in penitentiary influences on the basis of collaboration between prisons and local communities, highlighting its comprehensive impact on convicted persons. The main research problem is the impact of charity work on the attitudes of men serving prison sentences and its influence on satisfying their needs, changing moral values, increasing self-esteem, motivation and commitment.

  11. The Series – Serial work in artistic research and in the didactics of the arts

    Directory of Open Access Journals (Sweden)

    Aslaug Nyrnes

    2013-06-01

    Full Text Available The series is a paradoxical phenomenon in artistic work. The term “series” signifies copying, repetition, reproduction and frequently even trivialization – to break with the idea of the original. However, serial work is simultaneously central both in the work of art and in the didactics of arts and crafts. Using examples in painting and ceramics, this article discusses the series as an epistemological figure and relates the reflection to questions of quality assessment and the building of theory both in the didactics of the arts and in artistic research.

  12. Integrating Aspects of Working Environment into a National Research and Development Programme on Food Technology

    DEFF Research Database (Denmark)

    Broberg, Ole; Hansen, Iben Posniak

    2001-01-01

    In a Danish national research and development program on food technology, it was made a condition that funded projects consider potential working environment impacts. The present study evaluated these projects and concluded that this condition failed to have any significant effect on outcomes...... of working environment and food science and technology........ The reasons for this failure are explained by the social construction of the program and the fact that it neglected to consider the sociocultural dynamics within scientific and technological work. The program neither constructed useful boundary objects nor included actors that could link the social worlds...

  13. Final report on research and development work 1979 by the Institute for Radiochemistry

    International Nuclear Information System (INIS)

    1980-02-01

    The report gives a brief survey of the state of the research, development, and service activities in the Institute for Radiochemistry in Karlsruhe Nuclear Research Centre. The work is to be classified in the main points analytics, nuclear chemistry, isotope service, and water chemistry, with the analytic and nuclear-chemical tasks being mainly project-related. A bibliography of the publications made by the staff of the institute during 1979 is annected. (RB) [de

  14. Online Professional Profiles: Health Care and Library Researchers Show Off Their Work.

    Science.gov (United States)

    Brigham, Tara J

    2016-01-01

    In an increasingly digital world, online profiles can help health care and library professionals showcase their research and scholarly work. By sharing information about their investigations, studies, and projects, health care and library researchers can elevate their personal brand and connect with like-minded individuals. This column explores different types of online professional profiles and addresses some of the concerns that come with using them. A list of online professional profile and platform examples is also provided.

  15. Variable mass energy transformation and storage (VMETS) system using NH3-H2O as working fluid. Part 2: Modeling and simulation under partial storage strategy

    International Nuclear Information System (INIS)

    Xu, S.M.; Zhang, L.; Liang, J.; Du, R.

    2007-01-01

    This paper is the second part of our study on a new variable mass energy transformation and storage (VMETS) system using NH 3 -H 2 O as working fluid. In the previous study, the working principle and flow of the new system have been introduced, whilst the dynamic models of the new system have been developed and the simulation under the full storage strategy has been done. Therefore, in this paper, the working process and dynamic models of the system operating under the partial storage strategy are briefly re-described first, and then, the dynamic processes of energy transformation and storage for cooling are numerically simulated under this strategy. The simulation and analysis results reveal the relationship between the working parameters and the system operation time and predict the system behavior under various loading conditions. It is found that when the system stores energy for cooling under the partial storage strategy, the average COP c1 and COP c2 can reach 3.90 and 3.64, respectively. In order to achieve better system performance, an improved VMETS system is proposed in this paper for partial storage operation. Finally, a conclusion is drawn for these series of research on the new VMETS system

  16. [Effort-reward imbalance at work and depression: current research evidence].

    Science.gov (United States)

    Siegrist, J

    2013-01-01

    In view of highly prevalent stressful conditions in modern working life, in particular increasing work pressure and job insecurity, it is of interest to know whether specific constellations of an adverse psychosocial work environment increase the risk of depressive disorder among employed people. This contribution gives a short overview of current research evidence based on an internationally established work stress model of effort-reward imbalance. Taken together, results from seven prospective epidemiological investigations demonstrate a two-fold elevated relative risk of incident depressive disorder over a mean observation period of 2.7 years among exposed versus non-exposed employees. Additional findings from experimental and quasi-experimental studies point to robust associations of effort-reward imbalance at work with proinflammatory cytokines and markers of reduced immune competence. These latter markers may indicate potential psychobiological pathways. In conclusion, incorporating this new knowledge into medical treatment and preventive efforts seems well justified.

  17. Teachers’ Working Conditions Amid Swedish School Choice Reform: Avenues for Further Research

    Directory of Open Access Journals (Sweden)

    Karolina Åsa Parding

    2016-04-01

    Full Text Available Since the 1990s, governance changes, including customer choice agendas, have permeated the public sector and, consequently, welfare sector professionals’ work. One example is the education sector. The aim of this paper is to identify and discuss avenues for further research when it comes to teachers’ working conditions in the light of current choice agendas. This is accomplished by presenting an overview of previous studies on implications of the reforms for teachers’ working conditions. How are these conditions described in relation to the current school choice agenda in Sweden? What directions should be applied to increase knowledge of these conditions? We conclude by identifying some avenues for further research: the issues of organization of work, temporal and spatial dimensions of working conditions, and finally comparative studies of various forms, are suggested as warranting further investigation to highlight the diversified labor market in which teachers find themselves today.Keywords: Competition, governance change, privatization, professional work, school choice, Sweden, teaching profession, working conditions

  18. Social and natural sciences differ in their research strategies, adapted to work for different knowledge landscapes.

    Science.gov (United States)

    Jaffe, Klaus

    2014-01-01

    Do different fields of knowledge require different research strategies? A numerical model exploring different virtual knowledge landscapes, revealed two diverging optimal search strategies. Trend following is maximized when the popularity of new discoveries determine the number of individuals researching it. This strategy works best when many researchers explore few large areas of knowledge. In contrast, individuals or small groups of researchers are better in discovering small bits of information in dispersed knowledge landscapes. Bibliometric data of scientific publications showed a continuous bipolar distribution of these strategies, ranging from natural sciences, with highly cited publications in journals containing a large number of articles, to the social sciences, with rarely cited publications in many journals containing a small number of articles. The natural sciences seem to adapt their research strategies to landscapes with large concentrated knowledge clusters, whereas social sciences seem to have adapted to search in landscapes with many small isolated knowledge clusters. Similar bipolar distributions were obtained when comparing levels of insularity estimated by indicators of international collaboration and levels of country-self citations: researchers in academic areas with many journals such as social sciences, arts and humanities, were the most isolated, and that was true in different regions of the world. The work shows that quantitative measures estimating differences between academic disciplines improve our understanding of different research strategies, eventually helping interdisciplinary research and may be also help improve science policies worldwide.

  19. Using Simulation in Nursing PhD Education: Facilitating Application of Responsible Conduct of Research Principles.

    Science.gov (United States)

    Clayton, Margaret F; Supiano, Katherine; Wilson, Rebecca; Lassche, Madeline; Latendresse, Gwen

    Simulation is a standard clinical nursing educational approach; however, simulation is rarely used in nonclinical nursing education. In doctor of philosophy (PhD) programs, ethical content about responsible conduct of research (RCR) is traditionally didactic, presented early in the program of study. Ethics content merits review before students begin the dissertation phase; thus, the purpose of this project was to design and implement simulated scenarios to help students apply RCR principles prior to beginning independent research. Two scenarios were developed: (a) a potential protocol change discussed in a research team meeting and (b) an in-home data collection experience with an elderly participant and her daughter. Actors were trained faculty volunteers, playing roles outside their usual academic positions. Faculty facilitated scenarios by posing questions as cues related to desired learning outcomes as scenarios unfolded. Eleven nursing PhD students and 6 faculty participated. Debriefing facilitated discussion of RCR principles, common research quandaries, and suggested scenario revisions. Faculty, expert observation, and video-review showed that younger and less experienced students tried to give the "right" answer rather than implement RCR appropriate solutions. Students with more clinical experience had difficulty adopting the less familiar researcher role. Overall, simulation is a novel and useful way to enhance RCR content in PhD programs. Copyright © 2016 Elsevier Inc. All rights reserved.

  20. Using Simulation to Train Junior Psychiatry Residents to Work with Agitated Patients: A Pilot Study

    Science.gov (United States)

    Zigman, Daniel; Young, Meredith; Chalk, Colin

    2013-01-01

    Objective: This article examines the benefit and feasibility of introducing a new, simulation-based learning intervention for junior psychiatry residents. Method: Junior psychiatry residents were invited to participate in a new simulation-based learning intervention focusing on agitated patients. Questionnaires were used to explore the success of…