Report of results of contract research. 'Research on magneto hydrodynamic (MHD) generation'; MHD hatsuden system no kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1980-03-01

Examination was conducted in detail on an MHD generation system by coal combustion, with the results reported. Concerning a gas table calculation program in coal combustion, it was prepared assuming 100% slag removal ratio in the combustor as the primary approximation. A combustor for MHD generation needs to efficiently burn fuel using high temperature pre-heated air as the oxidant, to fully dissociate/electrolytically dissociate seed, and to supply to the generation channel a high speed combustion gas plasma having a high electrical conductivity which is required for MHD generation. This year, an examination was conducted on technological problems in burning coal in an MHD combustor. As for the NOx elimination system in an MHD generation plant, an examination was made if the method studied so far in MHD generation using heavy oil as the fuel is applicable to coal. Also investigated and reviewed were various characteristics, change in physical properties, recovery method, etc., in a mixed state of seed and slag in the case of coal combustion MHD. (NEDO)

Documentation and dissemination of agricultural Research results in ...

African Journals Online (AJOL)

A study was conducted to find out the volume of documented vis a vis generated agricultural research information over a 10-year period and to identify existing avenues for disseminating generated research information to the target population. A questionnaire survey was conducted between December 1996 and February ...

Research on grid connection control technology of double fed wind generator

Science.gov (United States)

Ling, Li

2017-01-01

The composition and working principle of variable speed constant frequency doubly fed wind power generation system is discussed in this thesis. On the basis of theoretical analysis and control on the modeling, the doubly fed wind power generation simulation control system is designed based on a TMS320F2407 digital signal processor (DSP), and has done a large amount of experimental research, which mainly include, variable speed constant frequency, constant pressure, Grid connected control experiment. The running results show that the design of simulation control system is reasonable and can meet the need of experimental research.

Approaches to informed consent for hypothesis-testing and hypothesis-generating clinical genomics research.

Science.gov (United States)

Facio, Flavia M; Sapp, Julie C; Linn, Amy; Biesecker, Leslie G

2012-10-10

Massively-parallel sequencing (MPS) technologies create challenges for informed consent of research participants given the enormous scale of the data and the wide range of potential results. We propose that the consent process in these studies be based on whether they use MPS to test a hypothesis or to generate hypotheses. To demonstrate the differences in these approaches to informed consent, we describe the consent processes for two MPS studies. The purpose of our hypothesis-testing study is to elucidate the etiology of rare phenotypes using MPS. The purpose of our hypothesis-generating study is to test the feasibility of using MPS to generate clinical hypotheses, and to approach the return of results as an experimental manipulation. Issues to consider in both designs include: volume and nature of the potential results, primary versus secondary results, return of individual results, duty to warn, length of interaction, target population, and privacy and confidentiality. The categorization of MPS studies as hypothesis-testing versus hypothesis-generating can help to clarify the issue of so-called incidental or secondary results for the consent process, and aid the communication of the research goals to study participants.

Generative Research on Second Language Acquisition.

Science.gov (United States)

Eubank, Lynn

1995-01-01

Reviews recent trends in generative research on second language acquisition, focusing on the role of universal grammar, parameter resetting, and anaphoric binding. An annotated bibliography discusses five important works in the field. (61 references) (MDM)

Preliminary research results for generation and application of high power ion beams on FLASh II accelerator

International Nuclear Information System (INIS)

Yang Hailiang; Qiu Aici; Zhang Jiasheng; He Xiaoping; Sun Jianfeng; Peng Jianchang; Tang Junping; Ren Shuqing; Ouyang Xiaoping; Zhang Guoguang; Huang Jianjun; Yang Li; Wang Haiyang; Li Jingya; Li Hongyu

2004-01-01

Preliminary results for the generation and application of the high power ion beam (HPIB) on the FLASH II accelerator are reported. The structure and principle of the pinch reflex ion beam diode are introduced. The equation of parapotential flow is corrected for the reduction of diode A-K gap due to the motion of cathode and anode plasma. The HPIB peak current of ∼160 kA is obtained with a peak energy of ∼500 keV. Experimental investigations of generating 6-7 MeV quasi-monoenergetic pulsed γ-rays with high power ion (proton) beams striking 19 F target are presented. In addition, the results of the thermal-mechanical effects on the material irradiated with HPIB, which are applied to the simulation of 1 keV black body radiation x-rays, are also discussed

Research Project Control System (RPCS); research results utilization data as of 06/30/81. Status summary report

International Nuclear Information System (INIS)

1981-09-01

The report on 'Research Results Utilization' provides status and control information concerning the utilization of research results in the regulatory policies and practices of the NRC. Research Information Letters (RILs) are prepared by RES to transmit research results to NRC user offices upon completion of a substantial, coherent and reasonably complete body of experimental and/or analytical research work. Section 3.0 of this report lists the RILs issued to date, together with an identification of the research program manager and the research program element which generated the RIL. The potential applicability of each RIL to the regulatory process is also identified, and comments from the cognizant RES and user office staff are summarized which relate to the expected impact of the reported RILs on the regulatory process

CRNL research reactor diesel generator reliability study 1960-1985

International Nuclear Information System (INIS)

Winfield, D.J.

1989-09-01

A data base has been provided for the CRNL research reactor diesel generator reliability, for use in risk assessment studies of CRNL research reactors. Data from 1960 to the present have been collected, representing 281 diesel generator years of experience. The data is used to provide failure-to-start probabilities and failure-to-run rates. Data is also classified according to subsystem failures, multiple failures and common cause failures. Comparisons with other recent studies of nuclear power plant diesel generator reliability have been made

Report on achievement in developing fuel cell power generation technology in fiscal 1998. Research and development of molten carbonate fuel cell power generation system (Summary of the research result); 1998 nendo nenryo denchi hatsuden gijutsu kaihatsu seika hokokusho. Yoyu tansan'engata nenryo denchi hatsuden system no kenkyu kaihatsu (kenkyu seika no yoyaku)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

Based on the achievement made in the second term plan of researching and developing a molten carbonate fuel cell power generation system, attempts are made on extending the service life, improving the performance, and reducing the cost. At the same time, lamination, cooling and operation technologies will be established, and a 1000-kW class power generation plant will be developed. Realization of use of coal gasified fuel in the future is aimed. Stack materials and their processing technologies will be developed, the cell durability will be improved, and the total system research will be carried out. This paper describes the achievements made during fiscal 1998. A process and control (PAC) test was performed on the fuel system facilities in the 1000-kW class generation plant, and its result was analyzed. The fuel system facilities had the test program using simulated fuel cells set from the system side digested nearly completely, verifying that actions can be taken for operation using actual fuel cells to be executed in fiscal 1999. Analysis of the test result presented raw material conversion rate of 96.6% or higher, generation of hydrogen plus CO of 740 m{sup 3} N/h, and NOx generation of 10 ppm or less. Stable combustion of a low calorie gas (500 kcal/m{sup 3} N) was achieved, completing all of the research objectives planned for fiscal 1998. (NEDO)

Research of PV Power Generation MPPT based on GABP Neural Network

Science.gov (United States)

Su, Yu; Lin, Xianfu

2018-05-01

Photovoltaic power generation has become the main research direction of new energy power generation. But high investment and low efficiency of photovoltaic industry arouse concern in some extent. So maximum power point tracking of photovoltaic power generation has been a popular study point. Due to slow response, oscillation at maximum power point and low precision, the algorithm based on genetic algorithm combined with BP neural network are designed detailedly in this paper. And the modeling and simulation are completed by use of MATLAB/SIMULINK. The results show that the algorithm is effective and the maximum power point can be tracked accurately and quickly.

Research results: preserving newborn blood samples.

Science.gov (United States)

Lewis, Michelle Huckaby; Scheurer, Michael E; Green, Robert C; McGuire, Amy L

2012-11-07

Retention and use, without explicit parental permission, of residual dried blood samples from newborn screening has generated public controversy over concerns about violations of family privacy rights and loss of parental autonomy. The public debate about this issue has included little discussion about the destruction of a potentially valuable public resource that can be used for research that may yield improvements in public health. The research community must advocate for policies and infrastructure that promote retention of residual dried blood samples and their use in biomedical research.

Power Generation and Transportation Systems Research Department: 1992 annual status report (Gas Research Institute)

International Nuclear Information System (INIS)

Benedict, A.

1992-09-01

Activities of Gas Research Institute's Power Generation and Transportation Systems subprogram for the period between October 1, 1991 and September 30, 1992 are summarized. The particular project areas covered in the report are Cogeneration and Power Systems, Engine Technology and Component Development, Natural Gas Vehicles Research, and Electric Power Generation. For each project area a separate chapter is provided. Each chapter includes a rationale for funding the research effort, the goals and objectives to be achieved, a general statement on research accomplishments, and the strategy employed in the project area. Each chapter also contains a series of summary reports on the status of each contract

CRL research reactor diesel generator reliability study 1960 - 1992

International Nuclear Information System (INIS)

Winfield, D.J.; McCauley, G.M.

1994-07-01

A data base has been provided for the Chalk River Laboratories (CRL) research reactor diesel generator reliability, for use in risk assessment studies of CRL research reactors. Data from 1960 to end of 1992 have been collected, representing 358 diesel generator years of experience. The data is used to provide failure-to-start probabilities and failure-to-run rates. Data is also classified according to subsystem failures, multiple failures and common cause failures. Comparisons with other recent studies of nuclear power plant diesel generator reliability have been made. This revision updates the 1989 September report. (author). 14 refs., 13 tabs., 10 figs

Food Waste Generation at Household Level: Results of a Survey among Employees of Two European Research Centers in Italy and Germany

Directory of Open Access Journals (Sweden)

Juliane Jörissen

2015-03-01

Full Text Available There is a broad consensus in literature that private households are significant contributors to the total amount of food waste in the EU. Thus, any strategy to meaningfully combat food wastage must put the end consumer in the center of prevention activities. This requires deeper insights into people’s motivations to discard still edible food and knowledge about potential barriers to reduce wasting. This paper reports on results of an online survey among two European research centers in Italy (JRC/Ispra and Germany (KIT/Karlsruhe. The focus of the survey was on households’ behaviors (shopping, eating, and food preparation habits and its influence on the generation of food waste. Furthermore, reasons for the disposal of food as well as measures and technologies most needed to prevent wastage were discussed. The results of the survey are analyzed, especially with regard to two questions: (1 Are there considerable differences between Ispra and Karlsruhe? (2 Are there considerable similarities or inconsistencies with the results of previous studies?

Communicating research results

Science.gov (United States)

Jan Fryk

1999-01-01

A research finding is of little value until it is known and applied. Hence) communication of results should be regarded as a natural, integrated part of research) and thus addressed in the research plans from the very beginning. A clearly defined information strategy and operational goals for information activities are needed for successful communication. For maximum...

Research perspectives on the evaluation of steam generator tube integrity

International Nuclear Information System (INIS)

Muscara, J.; Diercks, D.R.; Majumdar, S.; Kupperman, D.S.; Bakhtiari, S.; Shack, W.J.

2002-01-01

Industry efforts have been largely successful in managing degradation of steam generator tubes due to wastage, pitting, and denting, but fretting, stress corrosions cracking (SCC) and intergranular attack have proved more difficult to manage. Although steam generator replacements are proceeding, there is substantial industry interest in operating with degraded steam generators, and significant numbers of plants will continue to do so. In most cases degradation of steam generator tubing by stress corrosion cracking is still managed by 'plug or repair on detection' because current NDE techniques for characterization of flaws and the knowledge of SCC crack growth rates are not accurate enough to permit continued operation. Replacement generators with improved designs and materials have performed well to date, but previous experience with the appearance of some types of SCC in Alloy 600 after 10 years or more of operation and laboratory results suggest additional understanding of corrosion performance of these materials is needed. This paper reviews some of the historical background that underlies current steam generator degradation management strategies and outlines some of the additional research that must be done to provide more effective management of degradation in current generators and provide greater assurance of satisfactory performance in replacement steam generators. (author)

Third generation of lead slowing-down spectrometers: First results and prospects

International Nuclear Information System (INIS)

Alexeev, A.A.; Belousov, Yu.V.; Bergman, A.A.; Volkov, A.N.; Goncharenko, O.N.; Grachev, M.N.; Kazarnovsky, M.V.; Matushkov, V.L.; Mostovoy, V.I.; Novikov, A.V.; Novoselov, S.A.; Ryabov, Yu.V.; Stavissky, Yu.Ya.; Gledenov, Yu.M.; Parzhitski, S.S.; Popov, Yu.P.

1999-01-01

At the same neutron-source intensity S, lead slowing-down spectrometers (LSDS) for neutrons possess luminosity 10 3 -10 4 times as great as that of time-of-flight spectrometers with the same energy resolution ΔE/E(bar sign) (for the former, ΔE/E(bar sign)≅35-45% at a mean energy E(bar sign) less than 50 keV). In combination with high-current proton accelerators, third-generation LSDSs can operate at S values exceeding those acceptable for second-generation LSDSs coupled to electron accelerators by a factor of 10 2 to 10 3 . At the Institute for Nuclear Research (Russian Academy of Sciences, Moscow), the first third-generation LSDS facility called PITON (about 15 tons of lead) has been operating successfully and a large LSDS (more than 100 tons of lead) is now under construction. The results of the first experiments at the PITON facility are presented, and the experimental programs for both facilities is outlined

Research Results

Science.gov (United States)

2012-01-01

In situ Oxidation Study of Pt (110) and Its Interaction with CO Chinese Scientists Published a Paper on Prevention of Drug Craving and Relapse by Memory Retrieval-extinction Procedure in Science Series Papers Published in Energy Policy: Modeling Energy Use of China's Road Transport and Policy Evaluation Breakthrough in the Ambient Catalytic Destruction of Formaldehyde Novel Findings for High Altitude Adaptation from the Yak Genome Binary Colloidal Structures Assembled through Ising Interactions Reemergence of superconductivity at 48K in Compressed Iron Selenide Based Superconductors Nucleosomes Suppress Spontaneous Mutations Base-Specifically in Eukaryotes Single-Chain Fragmented Antibodies Guided SiRNA Delivery in Breast Cancer Does Yeast Suicide? China Scientists Developed Important Methodologies for Spatiotemporal Detecting and Manipulating of Cellular Activities Scorpions Inspire Chinese Scientists in Making Bionic Non-eroding Surfaces for Machinery Research on Phylogenetic Placement of Borthwickia and Description of a New Family of Angiosperms, Borthwickiaceae Plasmoid Ejection and Secondary Current Sheet Generation from Magnetic Reconnection in Laser-plasma Interaction Cotton Bollworm Adapts to Bt Cotton via Diverse Mutations A Histone Acetyltransferase Regulates Active DNA Demethylation in Arabidopsis

Systematic analysis method for radioactive wastes generated from nuclear research facilities

International Nuclear Information System (INIS)

Kameo, Yutaka; Ishimori, Ken-ichiro; Haraga, Tomoko; Shimada, Asako; Katayama, Atsushi; Nakashima, Mikio; Takahashi, Kuniaki

2011-01-01

Analytical methods have been developed for the simple and rapid determination of radioactive nuclides, which are selected as important nuclides for the safety assessment of the disposal of wastes generated from research facilities. We advanced the development of a high-efficiency nondestructive measurement technique for γ-ray-emitting nuclides, simple and rapid methods for the pretreatment of hard-to-dissolve samples and subsequent radiochemical separation, and rapid determination methods for long-lived nuclides. In order to establish a system to analyze the important nuclides in various kinds of sample, actual radioactive wastes such as concentrated liquid waste, activated concrete, and metal pipes were analyzed by the present method. The results showed that the present method was well suited for a rapid and simple determination of low-level radioactive wastes generated from research facilities. (author)

Research and development of selected components of the high-temperature reactor for process heat generation - results and their application

International Nuclear Information System (INIS)

Theymann, W.; Lange, G.

1989-01-01

For the process heat supplying high-temperature reactor (PNP) a comprehensive research and development program was performed. Investigations in three fields of the program are reported: heat transfer, gas flow guidance components, and seismic properties of the core structure. Results are presented for the statistics of heat transfer in the core and for heat transfer under operational conditions of a PNP-plant. Further topics are cooling of the side reflector, hot gas mixing in the core bottom region, optimization of inlet flow into the steam generator, and flow tests on a large diameter shut-off valve. Performance tests on hot gas insulations in a special test facility are described as well as tests on connecting elements for coaxial ducts. The measured data on dynamic excitation of the pebble bed with the SAMSON test facility allow an analytical description of the pebble bed core with respect to seismic behaviour. The results of experiments and calculations, using the computer codes CRUNCH-1D and -2D, for seismic excitation of the suspended top reflector are discussed. The seismic tests will be completed in 1989 with the side reflector investigations. A comprehensive seismic verification will then be available. (orig.)

EARTHQUAKE RESEARCH PROBLEMS OF NUCLEAR POWER GENERATORS

Energy Technology Data Exchange (ETDEWEB)

Housner, G. W.; Hudson, D. E.

1963-10-15

Earthquake problems associated with the construction of nuclear power generators require a more extensive and a more precise knowledge of earthquake characteristics and the dynamic behavior of structures than was considered necessary for ordinary buildings. Economic considerations indicate the desirability of additional research on the problems of earthquakes and nuclear reactors. The nature of these earthquake-resistant design problems is discussed and programs of research are recommended. (auth)

Present state of research and development of MHD power generation

International Nuclear Information System (INIS)

Ikeda, Shigeru

1978-01-01

MHD power generation can obtain electric energy directly from the heat energy of high speed plasma flow, and the power generating plant of 1 million kW can be realized by this method. When the MHD power generation method is combined before conventional thermal power generation method, the thermal efficiency can be raised to about 60% as compared with 38% in thermal power generation plants. The research and development of MHD power generation are in progress in USA and USSR. The research and development in Japan are in the second stage now after the first stage project for 10 years, and the Mark 7 generator with 100 kW electric output for 200 hr continuous operation is under construction. The MHD power generation is divided into three types according to the conductive fluids used, namely combustion type for thermal power generation, unequilibrated type and liquid metal type for nuclear power generation. The principle of MHD power generation and the constitution of the plant are explained. In Japan, the Mark 2 generator generated 1,180 kW for 1 min in 1971, and the Mark 3 generator generated 1.9 kW continuously for 110 hr in 1967. The MHD generator with superconducting magnet succeeded in 1969 to generate 25 kW for 6 min. The second stage project aimes at collecting design data and obtaining operational experience for the construction of 10 MW class pilot plant, and the Mark 7 and 8 generators are planned. (Kako, I.)

THE ROLE OF USER GENERATED CONTENT IN «NEW» MEDIA RESEARCH

Directory of Open Access Journals (Sweden)

Dmitry Igorevich Kaminchenko

2014-11-01

Full Text Available Purpose/subjectInvestigation of the role of user generated content in understanding of «new» media.Method/methodologyStructural and functional method is in the base.Results of workThe «new» media technologies meaning is considerated from the position of user created content. The concrete features of this content that display in functioning of «new» media are noticed in the article.Application of resultsResearch results may be useful in the future investigation of a phenomenon of «new» media.ConclusionsUnderstanding of the phenomenon of new media was deepened in the base of this features of user generated content. The author draws attention to the process of this content features showing in the political meaning of new media.

Establishment of database and network for research of stream generator and state of the art technology review

Energy Technology Data Exchange (ETDEWEB)

Choi, Jae Bong; Hur, Nam Su; Moon, Seong In; Seo, Hyeong Won; Park, Bo Kyu; Park, Sung Ho; Kim, Hyung Geun [Sungkyunkwan Univ., Seoul (Korea, Republic of)

2004-02-15

A significant number of steam generator tubes are defective and are removed from service or repaired world widely. This wide spread damage has been caused by diverse degradation mechanisms, some of which are difficult to detect and predict. Regarding domestic nuclear power plants, also, the increase of number of operating nuclear power plants and operating periods may result in the increase of steam generator tube failure. So, it is important to carry out the integrity evaluation process to prevent the steam generator tube damage. There are two objectives of this research. The one is to make database for the research of steam generator at domestic research institution. It will increase the efficiency and capability of limited domestic research resources by sharing data and information through network organization. Also, it will enhance the current standard of integrity evaluation procedure that is considerably conservative but can be more reasonable. The second objective is to establish the standard integrity evaluation procedure for steam generator tube by reviewing state of the art technology. The research resources related to steam generator tubes are managed by the established web-based database system. The following topics are covered in this project: development of web-based network for research on steam generator tubes review of state of the art technology.

Establishment of database and network for research of stream generator and state of the art technology review

International Nuclear Information System (INIS)

Choi, Jae Bong; Hur, Nam Su; Moon, Seong In; Seo, Hyeong Won; Park, Bo Kyu; Park, Sung Ho; Kim, Hyung Geun

2004-02-01

A significant number of steam generator tubes are defective and are removed from service or repaired world widely. This wide spread damage has been caused by diverse degradation mechanisms, some of which are difficult to detect and predict. Regarding domestic nuclear power plants, also, the increase of number of operating nuclear power plants and operating periods may result in the increase of steam generator tube failure. So, it is important to carry out the integrity evaluation process to prevent the steam generator tube damage. There are two objectives of this research. The one is to make database for the research of steam generator at domestic research institution. It will increase the efficiency and capability of limited domestic research resources by sharing data and information through network organization. Also, it will enhance the current standard of integrity evaluation procedure that is considerably conservative but can be more reasonable. The second objective is to establish the standard integrity evaluation procedure for steam generator tube by reviewing state of the art technology. The research resources related to steam generator tubes are managed by the established web-based database system. The following topics are covered in this project: development of web-based network for research on steam generator tubes review of state of the art technology

Fiscal 1976 Sunshine Project result report. Research on solar energy utilization systems (photovoltaic power generation); 1976 nendo taiyo energy riyo system chosa kenkyu seika hokokusho. Taiyoko hatsuden

Energy Technology Data Exchange (ETDEWEB)

NONE

1977-03-01

This report describes the fiscal 1976 research result on the technical and economical perspectives of various solar cells, high-efficiency solar cell and its evaluation technique, and a photovoltaic power generation system and its applications. On Si single-crystal slice solar cell, it was pointed out that cost reduction by automatic production process using no vacuum process is essential. On Si thin film solar cell, some problems to be solved for development of particle accelerating growth technique were pointed out. Study was also made on 2-6 group compound semiconductor solar cell, 3-5 group bulk crystal solar cell, 3-5 group thin film solar cell, solar collection solar cell, and raw polycrystal Si materials. On photovoltaic power generation systems, it was reconfirmed through reconsideration of power generation systems for every application that the photovoltaic power generation system for residences is promising. On medium- scale power generation systems, study was made on power load and system configuration in consideration of applications to electric railway, highway, and power source of isolated islands. (NEDO)

Person-generated Data in Self-quantification. A Health Informatics Research Program.

Science.gov (United States)

Gray, Kathleen; Martin-Sanchez, Fernando J; Lopez-Campos, Guillermo H; Almalki, Manal; Merolli, Mark

2017-01-09

The availability of internet-connected mobile, wearable and ambient consumer technologies, direct-to-consumer e-services and peer-to-peer social media sites far outstrips evidence about the efficiency, effectiveness and efficacy of using them in healthcare applications. The aim of this paper is to describe one approach to build a program of health informatics research, so as to generate rich and robust evidence about health data and information processing in self-quantification and associated healthcare and health outcomes. The paper summarises relevant health informatics research approaches in the literature and presents an example of developing a program of research in the Health and Biomedical Informatics Centre (HaBIC) at the University of Melbourne. The paper describes this program in terms of research infrastructure, conceptual models, research design, research reporting and knowledge sharing. The paper identifies key outcomes from integrative and multiple-angle approaches to investigating the management of information and data generated by use of this Centre's collection of wearable, mobiles and other devices in health self-monitoring experiments. These research results offer lessons for consumers, developers, clinical practitioners and biomedical and health informatics researchers. Health informatics is increasingly called upon to make sense of emerging self-quantification and other digital health phenomena that are well beyond the conventions of healthcare in which the field of informatics originated and consolidated. To make a substantial contribution to optimise the aims, processes and outcomes of health self-quantification needs further work at scale in multi-centre collaborations for this Centre and for health informatics researchers generally.

Training the New Generation of Polar Researchers

Science.gov (United States)

Drobot, S.; Weiler, C. S.

2008-12-01

The polar regions are changing rapidly, and many of the pressing problems faced in the future will require a new generation of polar researchers to be disciplinary experts and work across traditional disciplinary boundaries to conduct socially relevant, transformative research, and translate it to more effective action. To learn about the past and better address these new challenges, a select international group of 35 students and early career researchers who are conducting research during the 2007-2009 International Polar Year were brought together May 4-11, 2008, at the La Foret Conference Center for the New Generation Polar Research (NGPR) Symposium. The participants were drawn from professional backgrounds spanning the spectrum of social, natural, and physical sciences and represented the research programs of 7 countries. In addition to the participants, 12 mentors, some of whom participated in the IGY, shared insights, stories, and expertise. This diverse and ambitious group spent an intensive week learning about many important aspects of IPY history and research, along with communication, outreach, interdisciplinary research and career development. Each of the participants presented a 7-minute overview of his or her IPY research and provided details and discussion in evening poster sessions. Polar history provided an informative and unifying context for discussions of the past, present, and future that lasted throughout the week. Mentors and guest speakers shared insights and advice on media interactions, and many participants were subsequently interviewed for an upcoming radio story to be aired on National Public Radio. Several presentations on outreach were followed by a hands-on session for a group 1st grade students who were visiting the La Foret Conference Center. The Symposium also featured several break-out sessions, where small groups of participants and mentors discussed challenges related to interdisciplinary research, science advocacy, and

Student Affairs administrator shares research on Millennial Generation

OpenAIRE

DeLauder, Rachel

2006-01-01

Edward Spencer of Blacksburg, Va., associate vice president for student affairs at Virginia Tech, conducted a presentation at the North Cross School in Roanoke, Va., about his research on the Millennial Generation, which represents Americans born between 1982 and the present. The presentation, titled"Understanding and Working with Millennials," focused on the changing relationship between parents and this new generation and how parents can prepare them for success in higher education and the ...

Nuclear generation cost and nuclear research development fund

International Nuclear Information System (INIS)

Kim, S. S.; Song, G. D.

2000-01-01

The main objective of this study is to analyze the effects of nuclear R and D fund to nuclear generation cost and to assess the adaptability of fund size through the comparison with the nuclear research fund in Japan. It was estimated that nuclear R and D fund increased the average annual unit cost of nuclear power generation by 1.14 won/kWh. When the size of nuclear R and D fund is compared with that in Japan, this study suggests that the current nuclear R and D fund should be largely increased taking into consideration the ratio of R and D fund to nuclear generation

Generation After Next Propulsor Research: Robust Design for Embedded Engine Systems

Science.gov (United States)

Arend, David J.; Tillman, Gregory; O'Brien, Walter F.

2012-01-01

The National Aeronautics and Space Administration, United Technologies Research Center and Virginia Polytechnic and State University have contracted to pursue multi-disciplinary research into boundary layer ingesting (BLI) propulsors for generation after next environmentally responsible subsonic fixed wing aircraft. This Robust Design for Embedded Engine Systems project first conducted a high-level vehicle system study based on a large commercial transport class hybrid wing body aircraft, which determined that a 3 to 5 percent reduction in fuel burn could be achieved over a 7,500 nanometer mission. Both pylon-mounted baseline and BLI propulsion systems were based on a low-pressure-ratio fan (1.35) in an ultra-high-bypass ratio engine (16), consistent with the next generation of advanced commercial turbofans. An optimized, coupled BLI inlet and fan system was subsequently designed to achieve performance targets identified in the system study. The resulting system possesses an inlet with total pressure losses less than 0.5%, and a fan stage with an efficiency debit of less than 1.5 percent relative to the pylon-mounted, clean-inflow baseline. The subject research project has identified tools and methodologies necessary for the design of next-generation, highly-airframe-integrated propulsion systems. These tools will be validated in future large-scale testing of the BLI inlet / fan system in NASA's 8 foot x 6 foot transonic wind tunnel. In addition, fan unsteady response to screen-generated total pressure distortion is being characterized experimentally in a JT15D engine test rig. These data will document engine sensitivities to distortion magnitude and spatial distribution, providing early insight into key physical processes that will control BLI propulsor design.

Progress and Results from the 4DH Research Centre

DEFF Research Database (Denmark)

Werner, Sven; Lund, Henrik; Mathiesen, Brian Vad

2014-01-01

With lower and more flexible distribution temperatures, fourth generation district heating systems can utilize renewable energy sources, while meeting the requirements of low-energy buildings and energy conservation measures in the existing building stock. 4DH is an international strategic research...... centre located at Aalborg University, which develops 4th generation district heating technologies and systems (4GDH). This technology is fundamental to the implementation of the Danish objective of being fossil fuel-free by 2050 and the European 2020 goals. The research centre is working between 2012...... and 2017, with The Danish Council for Strategic Research as main financier and the participating 31 Danish and international companies and universities as cofinanciers. Thirteen PhD student projects constitute a vital part of the research centre. In 4GDH systems, synergies are created between three areas...

Tag cloud generation for results of multiple keywords queries

DEFF Research Database (Denmark)

Leginus, Martin; Dolog, Peter; Lage, Ricardo Gomes

2013-01-01

In this paper we study tag cloud generation for retrieved results of multiple keyword queries. It is motivated by many real world scenarios such as personalization tasks, surveillance systems and information retrieval tasks defined with multiple keywords. We adjust the state-of-the-art tag cloud...... generation techniques for multiple keywords query results. Consequently, we conduct the extensive evaluation on top of three distinct collaborative tagging systems. The graph-based methods perform significantly better for the Movielens and Bibsonomy datasets. Tag cloud generation based on maximal coverage...

The Research Process and the Library: First-Generation College Seniors vs. Freshmen

Science.gov (United States)

Pickard, Elizabeth; Logan, Firouzeh

2013-01-01

In a follow-up study to the ERIAL (Ethnographic Research in Illinois Academic Libraries) Project, librarians at UIC compared the responses of first-generation college freshmen from the original study to those of seniors. The study's aim was to determine whether student information literacy increases as a result of undergraduate education and to…

Utilization of a sealed-tube neutron generator for training and research

International Nuclear Information System (INIS)

Jonah, S.A.

2000-01-01

The development of a program in nuclear science and technology in Nigeria began in 1976 with the establishment of two research centers, namely, the Centre for Energy Research and Training, (CERT), Zaria and the Centre for Energy Research and Development (CERD), Ile-Ife. The choice of Neutron Activation Analysis (NAA) technique as a very effective method of training scientists in basic and applied nuclear research led to the purchase of two KAMAN A-711 Neutron Generators for the two research centers. At CERT, the neutron generator (code named ZARABUNG-1) was successfully installed and the first 14 MeV neutrons were produced through the technical assistance of the International Atomic Energy Agency (IAEA) in 1988. In 1991, a new tube-head was purchased and installed due to the expiration of the old tube. Following the completion of its permanent site, the neutron generator was re-located from the old site and re-installed at the permanent site of CERT in 1995. (author)

Generation and management of solid waste resulting from tourist activities of the Porto de Galinhas - P

Directory of Open Access Journals (Sweden)

Jaqueline Guimarães Santos

2015-04-01

Full Text Available The significant solid waste generation, coupled with the lack of proper management of the waste generated, has been one of the issues of concern and conducting research on the part of scholars in the field. Tourism as an activity that positively impacts and negativity a given location, has emerged as an activity that can generate a lot of waste, especially in periods of high season, considering the increase of people moving to the tourist destinations. Accordingly, this study aims to analyze the generation and management of solid waste resulting from tourism in Porto de Galinhas, PE. We performed an exploratory, descriptive, qualitative study, conducted in the form of a case study in Porto de Galinhas, PE. The data collection was done interviews together social actors, as well as non-participant observation during data collection. The results showed that tourism activities in Porto de Galinhas result in a high amount of solid waste, and these are directed to inappropriate places. Although fate presents a combination of recyclable materials, RECYCLE, reuses this not a significant amount, given the proportion of waste generated.

Experimental facilities for Generation IV reactors research

International Nuclear Information System (INIS)

Krecanova, E.; Di Gabriele, F.; Berka, J.; Zychova, M.; Macak, J.; Vojacek, A.

2013-06-01

Centrum Vyzkumu Rez (CVR) is research and development Company situated in Czech Republic and member of the UJV group. One of its major fields is material research for Generation IV reactor concepts, especially supercritical water-cooled reactor (SCWR), very high temperature/gas-cooled fast reactor (VHTR/GFR) and lead-cooled fast reactor (LFR). The CVR is equipped by and is building unique experimental facilities which simulate the environment in the active zones of these reactor concepts and enable to pre-qualify and to select proper constructional materials for the most stressed components of the facility (cladding, vessel, piping). New infrastructure is founded within the Sustainable Energy project focused on implementation the Generation IV and fusion experimental facilities. The research of SCWR concept is divided to research and development of the constructional materials ensured by SuperCritical Water Loop (SCWL) and fuel components research on Fuel Qualification Test loop (SCWL-FQT). SCWL provides environment of the primary circuits of European SCWR, pressure 25 MPa, temperature 600 deg. C and its major purpose is to simulate behavior of the primary medium and candidate constructional materials. On-line monitoring system is included to collect the operational data relevant to experiment and its evaluation (pH, conductivity, chemical species concentration). SCWL-FQT is facility focused on the behavior of cladding material and fuel at the conditions of so-called preheater, the first pass of the medium through the fuel (in case of European SCWR concept). The conditions are 450 deg. C and 25 MPa. SCWL-FQT is unique facility enabling research of the shortened fuel rods. VHTR/GFR research covers material testing and also cleaning methods of the medium in primary circuit. The High Temperature Helium Loop (HTHL) enables exposure of materials and simulates the VHTR/GFR core environment to analyze the behavior of medium, especially in presence of organic compounds and

Creation of a new-generation research nuclear facility

International Nuclear Information System (INIS)

Girchenko, A.A.; Matyushin, A.P.; Kudryavtsev, E.M.; Skopin, V.P.; Shchepelev, R.M.

2013-01-01

The SO-2M research nuclear facility operated on the industrial area of the institute. The facility is now removed from service. In view of this circumstance, it is proposed to restore the facility at the new qualitative level, i.e., to create a new-generation research nuclear facility with a very high safety level consisting of a subcritical bench and a proton accelerator (electronuclear facility). Competitive advantages and design features have been discussed and the productive capacity of the research nuclear facility under development has been evaluated [ru

Genomic Research Data Generation, Analysis and Sharing – Challenges in the African Setting

Directory of Open Access Journals (Sweden)

Nicola Mulder

2017-11-01

Full Text Available Genomics is the study of the genetic material that constitutes the genomes of organisms. This genetic material can be sequenced and it provides a powerful tool for the study of human, plant and animal evolutionary history and diseases. Genomics research is becoming increasingly commonplace due to significant advances in and reducing costs of technologies such as sequencing. This has led to new challenges including increasing cost and complexity of data. There is, therefore, an increasing need for computing infrastructure and skills to manage, store, analyze and interpret the data. In addition, there is a significant cost associated with recruitment of participants and collection and processing of biological samples, particularly for large human genetics studies on specific diseases. As a result, researchers are often reluctant to share the data due to the effort and associated cost. In Africa, where researchers are most commonly at the study recruitment, determination of phenotypes and collection of biological samples end of the genomic research spectrum, rather than the generation of genomic data, data sharing without adequate safeguards for the interests of the primary data generators is a concern. There are substantial ethical considerations in the sharing of human genomics data. The broad consent for data sharing preferred by genomics researchers and funders does not necessarily align with the expectations of researchers, research participants, legal authorities and bioethicists. In Africa, this is complicated by concerns about comprehension of genomics research studies, quality of research ethics reviews and understanding of the implications of broad consent, secondary analyses of shared data, return of results and incidental findings. Additional challenges with genomics research in Africa include the inability to transfer, store, process and analyze large-scale genomics data on the continent, because this requires highly specialized skills

Vulnerability of hydropower generation to climate change in China: Results based on Grey forecasting model

International Nuclear Information System (INIS)

Wang, Bing; Liang, Xiao-Jie; Zhang, Hao; Wang, Lu; Wei, Yi-Ming

2014-01-01

This paper analyzes the long-term relationships between hydropower generation and climate factors (precipitation), hydropower generation capacity (installed capacity of hydropower station) to quantify the vulnerability of renewable energy production in China for the case of hydropower generation. Furthermore, this study applies Grey forecasting model to forecast precipitation in different provinces, and then sets up different scenarios for precipitation based on the IPCC Special Report on Emission Scenarios and results from PRECIS (Providing Regional Climate projections for Impacts Studies) model. The most important result found in this research is the increasing hydropower vulnerability of the poorest regions and the main hydropower generation provinces of China to climate change. Other main empirical results reveal that the impacts of climate change on the supply of hydropower generation in China will be noteworthy for the society. Different scenarios have different effects on hydropower generation, of which A2 scenario (pessimistic, high emission) has the largest. Meanwhile, the impacts of climate change on hydropower generation of every province are distinctly different, of which the Southwest part has the higher vulnerability than the average level while the central part lower. - Highlights: • The hydropower vulnerability will be enlarged with the rapid increase of hydropower capacity. • Modeling the vulnerability of hydropower in different scenarios and different provinces. • The increasing hydropower vulnerability of the poorest regions to climate change. • The increasing hydropower vulnerability of the main hydropower generation provinces. • Rainfall pattern caused by climate change would be the reason for the increasing vulnerability

The Employees of Baby Boomers Generation, Generation X, Generation Y and Generation Z in Selected Czech Corporations as Conceivers of Development and Competitiveness in their Corporation

Directory of Open Access Journals (Sweden)

Bejtkovský Jiří

2016-12-01

Full Text Available The corporations using the varied workforce can supply a greater variety of solutions to problems in service, sourcing, and allocation of their resources. The current labor market mentions four generations that are living and working today: the Baby boomers generation, the Generation X, the Generation Y and the Generation Z. The differences between generations can affect the way corporations recruit and develop teams, deal with change, motivate, stimulate and manage employees, and boost productivity, competitiveness and service effectiveness. A corporation’s success and competitiveness depend on its ability to embrace diversity and realize the competitive advantages and benefits. The aim of this paper is to present the current generation of employees (the employees of Baby Boomers Generation, Generation X, Generation Y and Generation Z in the labor market by secondary research and then to introduce the results of primary research that was implemented in selected corporations in the Czech Republic. The contribution presents a view of some of the results of quantitative and qualitative research conducted in selected corporations in the Czech Republic. These researches were conducted in 2015 on a sample of 3,364 respondents, and the results were analyzed. Two research hypotheses and one research question have been formulated. The verification or rejection of null research hypothesis was done through the statistical method of the Pearson’s Chi-square test. It was found that perception of the choice of superior from a particular generation does depend on the age of employees in selected corporations. It was also determined that there are statistically significant dependences between the preference for eterogeneous or homogeneous cooperation and the age of employees in selected corporations.

The sonic window: second generation results

Science.gov (United States)

Walker, William F.; Fuller, Michael I.; Brush, Edward V.; Eames, Matthew D. C.; Owen, Kevin; Ranganathan, Karthik; Blalock, Travis N.; Hossack, John A.

2006-03-01

Medical Ultrasound Imaging is widely used clinically because of its relatively low cost, portability, lack of ionizing radiation, and real-time nature. However, even with these advantages ultrasound has failed to permeate the broad array of clinical applications where its use could be of value. A prime example of this untapped potential is the routine use of ultrasound to guide intravenous access. In this particular application existing systems lack the required portability, low cost, and ease-of-use required for widespread acceptance. Our team has been working for a number of years to develop an extremely low-cost, pocket-sized, and intuitive ultrasound imaging system that we refer to as the "Sonic Window." We have previously described the first generation Sonic Window prototype that was a bench-top device using a 1024 element, fully populated array operating at a center frequency of 3.3 MHz. Through a high degree of custom front-end integration combined with multiplexing down to a 2 channel PC based digitizer this system acquired a full set of RF data over a course of 512 transmit events. While initial results were encouraging, this system exhibited limitations resulting from low SNR, relatively coarse array sampling, and relatively slow data acquisition. We have recently begun assembling a second-generation Sonic Window system. This system uses a 3600 element fully sampled array operating at 5.0 MHz with a 300 micron element pitch. This system extends the integration of the first generation system to include front-end protection, pre-amplification, a programmable bandpass filter, four sample and holds, and four A/D converters for all 3600 channels in a set of custom integrated circuits with a combined area smaller than the 1.8 x 1.8 cm footprint of the transducer array. We present initial results from this front-end and present benchmark results from a software beamformer implemented on the Analog Devices BF-561 DSP. We discuss our immediate plans for further

Stakeholder views on returning research results.

Science.gov (United States)

Haga, Susanne B; Zhao, Jennifer Q

2013-01-01

While the disclosure of research findings is relevant to all types of biomedical research, it has garnered particular attention with respect to genetics and genomics research due to some of the unique aspects of the data and the high public profile of the field. In this chapter, we review the attitudes of stakeholders (research participants, policymakers, and researchers) to define areas of consensus regarding the issue of returning research results across and within groups. In addition to stakeholder attitudes about obligations and interest in research results, other major related issues related to returning research results, such as informed consent, communication of research results, and cost, are discussed. Given the consensus between stakeholders to return summary reports of a study's outcomes and individual research results of clinical significance, we conclude that the time has come to encourage, if not require, researchers to consider these issues in the developmental planning stages of a project and to plan and budget accordingly. © 2013 Elsevier Inc. All rights reserved.

A Qualitative Research on Example Generation Capabilities of University Students

Science.gov (United States)

Saglam, Yasemin; Dost, Senol

2016-01-01

Examples which are used in exploring a procedure or comprehending/concretizing a mathematical concept are powerful teaching tools. Generating examples other than conventional ones is both a means for research and a pedagogical method. The aim of this study is to determine the transition process between example generation strategies, and the…

Environmental costs resulting from the use of hard coal to electricity generation in Poland

Science.gov (United States)

Stala-Szlugaj, Katarzyna; Grudziński, Zbigniew

2017-10-01

In the world's fuel mix used for generating electricity, the most common fossil fuel is coal. In the EU, coal combustion and electricity generation entail the need to purchase emission allowances (EUA) whose purchase costs affect the costs of electricity generation significantly. The research described in the article shows how current market conditions shape the profitability of generating electricity from coal and how Clean Dark Spread (CDS) changes as a function of changes in energy and coal prices at the assumed levels of emission and prices of EUA allowances. The article compares the results of CDS calculations in two variants. Areas have been highlighted where prices of both coal and EUA allowances cause CDS to assume values at which the prices of generated electricity do not cover the costs of fuel (i) and CO2 emission allowances, cover all costs (ii), or constitute positive prices (iii), but still do not cover all fixed costs. With higher power plant efficiency, CO2 emissions are lower (0.722 t/MWh). The costs of purchasing fuel required to generate 1 MWh of electricity are also lower. In such case—even with relatively high prices of coal—a power plant can achieve profitability of electricity generation.

Environmental costs resulting from the use of hard coal to electricity generation in Poland

Directory of Open Access Journals (Sweden)

Stala-Szlugaj Katarzyna

2017-01-01

Full Text Available In the world's fuel mix used for generating electricity, the most common fossil fuel is coal. In the EU, coal combustion and electricity generation entail the need to purchase emission allowances (EUA whose purchase costs affect the costs of electricity generation significantly. The research described in the article shows how current market conditions shape the profitability of generating electricity from coal and how Clean Dark Spread (CDS changes as a function of changes in energy and coal prices at the assumed levels of emission and prices of EUA allowances. The article compares the results of CDS calculations in two variants. Areas have been highlighted where prices of both coal and EUA allowances cause CDS to assume values at which the prices of generated electricity do not cover the costs of fuel (i and CO2 emission allowances, cover all costs (ii, or constitute positive prices (iii, but still do not cover all fixed costs. With higher power plant efficiency, CO2 emissions are lower (0.722 t/MWh. The costs of purchasing fuel required to generate 1 MWh of electricity are also lower. In such case—even with relatively high prices of coal—a power plant can achieve profitability of electricity generation.

The 15th results of the research in 1990

International Nuclear Information System (INIS)

1990-10-01

This book consists of the various researches, which are automatic input of data of steam generator and development of program for data arrangement with IBM-PC, development of an removable air cleaner, camera power remote controller on CCTV, study on the efficient way for equipment of maintenance and manufacturing technology of a nuclear assembly and analysis on a hydraulic test in steam generator.

Research perspectives on the evaluation of steam generator tube integrity

International Nuclear Information System (INIS)

Muscara, J.; Diercks, D. R.; Majumdar, S.; Kupperman, D. S.; Bakhtiari, S.; Shack, W. J.

2001-01-01

Industry effects have been largely successful in managing degradation of steam generator tubes due to wastage, pitting, and denting, but fretting, SCC and intergranular attack have proved more difficult to manage. Although steam generator replacements are proceeding there is substantial industry interest in operating with degraded steam generators, and significant numbers of plants will continue to do so. In most cases degradation of steam generator tubing by stress corrosion cracking is still managed by plug or repair on detection, because current NDE techniques for characterization of flaws are not accurate enough to permit continued operation. This paper reviews some of the historical background that underlies current steam generator degradation management strategies and outlines some of the additional research that must be done to provide more effective management of degradation in current generators and provide greater assurance of satisfactory performance in replacement steam generators

Challenges and Difficulties to Teaching Engineering to Generation Z: a case research

Directory of Open Access Journals (Sweden)

Suamit Correia Barreiro

2017-08-01

Full Text Available Many people from generation Z are at the beginning of their academic activities. This generation has peculiar characteristics that might be a challenge in the labor market. Thus, instructors have a great role in their preparation. However, professors might face difficulties dealing with their specific characteristics. The research aims to carry out a general survey to enable an understanding of the greater challenges and difficulties in teaching the subject of engineering to the students of Generation Z. The research method used was a case study at a University with 20 instructors from the Faculty of Engineering. The analysis revealed a great challenge in relating theoretical concepts with practical concepts. The research also showed a probable tendency of using more exhibition methods, and the low knowledge about generation Z by most instructors. This study seeks to contribute to the teaching-learning process of engineering.

Applications of nanotechnology, next generation sequencing and microarrays in biomedical research.

Science.gov (United States)

Elingaramil, Sauli; Li, Xiaolong; He, Nongyue

2013-07-01

Next-generation sequencing technologies, microarrays and advances in bio nanotechnology have had an enormous impact on research within a short time frame. This impact appears certain to increase further as many biomedical institutions are now acquiring these prevailing new technologies. Beyond conventional sampling of genome content, wide-ranging applications are rapidly evolving for next-generation sequencing, microarrays and nanotechnology. To date, these technologies have been applied in a variety of contexts, including whole-genome sequencing, targeted re sequencing and discovery of transcription factor binding sites, noncoding RNA expression profiling and molecular diagnostics. This paper thus discusses current applications of nanotechnology, next-generation sequencing technologies and microarrays in biomedical research and highlights the transforming potential these technologies offer.

Overview of NASA's Next Generation Air Transportation System (NextGen) Research

Science.gov (United States)

Swenson, Harry N.

2009-01-01

This slide presentation is an overview of the research for the Next Generation Air Transportation System (NextGen). Included is a review of the current air transportation system and the challenges of air transportation research. Also included is a review of the current research highlights and significant accomplishments.

Digital generation, net generation, millennials, Y generation: reflecting about the relation between the youths and digital technologies

OpenAIRE

Martins, Cristina; Pontifícia Universidade Católica do Rio Grande do Sul (PUCRS) Rede La Salle

2015-01-01

This study aimed is critically reflect on the relationship of the youths with the TD, by discussing the generational approach. This approach in different researches linked the youths, through terms like Digital Generation, Net Generation, Millennials and Y Generation, creating stereotypes and excluding social, cultural, economic and political perspectives. The results of this qualitative research, based on reflections through literature, sees reality of Brazilian youths that do not have acces...

Theoretical and empirical convergence results for additive congruential random number generators

Science.gov (United States)

Wikramaratna, Roy S.

2010-03-01

Additive Congruential Random Number (ACORN) generators represent an approach to generating uniformly distributed pseudo-random numbers that is straightforward to implement efficiently for arbitrarily large order and modulus; if it is implemented using integer arithmetic, it becomes possible to generate identical sequences on any machine. This paper briefly reviews existing results concerning ACORN generators and relevant theory concerning sequences that are well distributed mod 1 in k dimensions. It then demonstrates some new theoretical results for ACORN generators implemented in integer arithmetic with modulus M=2[mu] showing that they are a family of generators that converge (in a sense that is defined in the paper) to being well distributed mod 1 in k dimensions, as [mu]=log2M tends to infinity. By increasing k, it is possible to increase without limit the number of dimensions in which the resulting sequences approximate to well distributed. The paper concludes by applying the standard TestU01 test suite to ACORN generators for selected values of the modulus (between 260 and 2150), the order (between 4 and 30) and various odd seed values. On the basis of these and earlier results, it is recommended that an order of at least 9 be used together with an odd seed and modulus equal to 230p, for a small integer value of p. While a choice of p=2 should be adequate for most typical applications, increasing p to 3 or 4 gives a sequence that will consistently pass all the tests in the TestU01 test suite, giving additional confidence in more demanding applications. The results demonstrate that the ACORN generators are a reliable source of uniformly distributed pseudo-random numbers, and that in practice (as suggested by the theoretical convergence results) the quality of the ACORN sequences increases with increasing modulus and order.

Review of the research proposal for the steam generator retired from Kori unit 1

Energy Technology Data Exchange (ETDEWEB)

Kim, Joung Soo; Han, Joung Ho; Kim, Hong Pyo; Lim, Yun Soo; Lee, Deok Hyun; Hwang, Seong Sik; Hur, Do Haeng [Korea Atomic Energy Research Institute, Taejeon (Korea)

2002-03-01

The tubes of the steam generator retired form Kori unit 1 have many different kinds of failures, such as denting pitting, wastage, ODSCC, PWSCC.Korea Electric Power Research Institute (KEPRI) submitted a research proposal for the steam generator to the Korea Institute S and T Evaluation and Planning (KSITEP). The KISTEP requested Korea Atomic Energy Research Institute to review the proposal by organizing a committee which should be composed of the specialists of the related domestic research institutes. Opinions of the committee on the objectives, research fields, economic benefit and validity in the research proposal were reviewed and suggested optimal research fields to be fulfilled successfully for the retired steam generator. Also, the rolls for the participants in the research works were allocated, which is critical in order to do the project effectively. 6 figs., 5 tabs. (Author)

2020 Vision: Envisioning a New Generation of STEM Learning Research

Science.gov (United States)

Dierking, Lynn D.; Falk, John H.

2016-01-01

In this issue, we have compiled six original papers, outcomes from the U.S. National Science Foundation (US-NSF)-funded REESE (Research and Evaluation on Education in Science and Engineering) 2020 Vision: The Next Generation of STEM Learning Research project. The purpose of 2020 Vision was to re-envision the questions and frameworks guiding STEM…

New compact hohlraum configuration research at the 1.7 MA Z-pinch generator

Energy Technology Data Exchange (ETDEWEB)

Kantsyrev, V. L., E-mail: victor@unr.edu; Shrestha, I. K.; Esaulov, A. A.; Safronova, A. S.; Shlyaptseva, V. V.; Osborne, G. C.; Astanovitsky, A. L.; Weller, M. E.; Stafford, A.; Schultz, K. A.; Cooper, M. C. [Physics Department, University of Nevada, Reno, NV 89557 (United States); Chuvatin, A. S. [Laboratorie de Physique des Plasmas, Ecole Polytechnique, 91128 Palaiseau (France); Rudakov, L. I. [Icarus Research Inc., P.O. Box 30780, Bethesda, MD 20824-0780 (United States); Velikovich, A. L. [Plasma Physics Division, Naval Research Laboratory, Washington, DC 20375 (United States); Cuneo, M. E.; Jones, B.; Vesey, R. A. [Sandia National Laboratories, Albuquerque, NM 87110 (United States)

2014-12-15

A new compact Z-pinch x-ray hohlraum design with parallel-driven x-ray sources was experimentally demonstrated in a full configuration with a central target and tailored shine shields (to provide a symmetric temperature distribution on the target) at the 1.7 MA Zebra generator. This presentation reports on the joint success of two independent lines of research. One of these was the development of new sources – planar wire arrays (PWAs). PWAs turned out to be a prolific radiator. Another success was the drastic improvement in energy efficiency of pulsed-power systems, such as the Load Current Multiplier (LCM). The Zebra/LCM generator almost doubled the plasma load current to 1.7 MA. The two above-mentioned innovative approaches were used in combination to produce a new compact hohlraum design for ICF, as jointly proposed by SNL and UNR. Good agreement between simulated and measured radiation temperature of the central target is shown. Experimental comparison of PWAs with planar foil liners (PFL) - another viable alternative to wire array loads at multi-MA generators show promising data. Results of research at the University of Nevada Reno allowed for the study of hohlraum coupling physics at University-scale generators. The advantages of new hohlraum design applications for multi-MA facilities with W or Au double PWAs or PFL x-ray sources are discussed.

Automated Generation of Technical Documentation and Provenance for Reproducible Research

Science.gov (United States)

Jolly, B.; Medyckyj-Scott, D.; Spiekermann, R.; Ausseil, A. G.

2017-12-01

Data provenance and detailed technical documentation are essential components of high-quality reproducible research, however are often only partially addressed during a research project. Recording and maintaining this information during the course of a project can be a difficult task to get right as it is a time consuming and often boring process for the researchers involved. As a result, provenance records and technical documentation provided alongside research results can be incomplete or may not be completely consistent with the actual processes followed. While providing access to the data and code used by the original researchers goes some way toward enabling reproducibility, this does not count as, or replace, data provenance. Additionally, this can be a poor substitute for good technical documentation and is often more difficult for a third-party to understand - particularly if they do not understand the programming language(s) used. We present and discuss a tool built from the ground up for the production of well-documented and reproducible spatial datasets that are created by applying a series of classification rules to a number of input layers. The internal model of the classification rules required by the tool to process the input data is exploited to also produce technical documentation and provenance records with minimal additional user input. Available provenance records that accompany input datasets are incorporated into those that describe the current process. As a result, each time a new iteration of the analysis is performed the documentation and provenance records are re-generated to provide an accurate description of the exact process followed. The generic nature of this tool, and the lessons learned during its creation, have wider application to other fields where the production of derivative datasets must be done in an open, defensible, and reproducible way.

Crowdfunding Campaigns Help Researchers Launch Projects and Generate Outreach.

Science.gov (United States)

Dahlhausen, Katherine; Krebs, Bethany L; Watters, Jason V; Ganz, Holly H

2016-03-01

Organizers of participatory research (citizen science) projects can generate funds and outreach through crowdfunding. Here we provide insights from three successful science crowdfunding campaigns recently completed on Indiegogo, Experiment, and Kickstarter. Choosing a crowdfunding platform that fits the project is just the beginning; a successful campaign reflects its content, management, and marketing, and some researchers may need to acquire new skills. In addition, the growing trend of crowdfunding for science reinforces the importance of academic engagement with social media.

Testing of the Advanced Stirling Radioisotope Generator Engineering Unit at NASA Glenn Research Center

Science.gov (United States)

Lewandowski, Edward J.

2013-01-01

The Advanced Stirling Radioisotope Generator (ASRG) is a high-efficiency generator being developed for potential use on a Discovery 12 space mission. Lockheed Martin designed and fabricated the ASRG Engineering Unit (EU) under contract to the Department of Energy. This unit was delivered to NASA Glenn Research Center in 2008 and has been undergoing extended operation testing to generate long-term performance data for an integrated system. It has also been used for tests to characterize generator operation while varying control parameters and system inputs, both when controlled with an alternating current (AC) bus and with a digital controller. The ASRG EU currently has over 27,000 hours of operation. This paper summarizes all of the tests that have been conducted on the ASRG EU over the past 3 years and provides an overview of the test results and what was learned.

Preliminary research results for the generation and diagnostics of high power ion beams on FLASH II accelerator

International Nuclear Information System (INIS)

Yang Hailiang; Qiu Aici; Sun Jianfeng; He Xiaoping; Tang Junping; Wang Haiyang; Li Jingya; Ren Shuqing; Ouyang Xiaoping; Zhang Guoguang; Li Hongyu

2004-01-01

The preliminary experimental results of the generation and diagnostics of high-power ion beams on FLASH II accelerator are reported. The high-power ion beams presently are being produced in a pinched diode. The method for enhancing the ratio of ion to electron current is to increase the electron residing time by pinching the electron flow. Furthermore, electron beam pinching can be combined with electron reflexing to achieve ion beams with even higher efficiency and intensity. The anode plasma is generated by anode foil bombarded with electron and anode foil surface flashover. In recent experiments on FLASH II accelerator, ion beams have been produced with a current of 160 kA and an energy of 500 keV corresponding to an ion beam peak power of about 80 GW. The ion number and current of high power ion beams were determined by monitoring delayed radioactivity from nuclear reactions induced in a 12 C target by the proton beams. The prompt γ-rays and diode Bremsstrahlung X-rays were measured with a PIN semi-conductor detector and a plastic scintillator detector. The current density distribution of ion beam was measured with a biased ion collector array. The ion beams were also recorded with a CR-39 detector. (authors)

Validation of the WIMSD4M cross-section generation code with benchmark results

International Nuclear Information System (INIS)

Deen, J.R.; Woodruff, W.L.; Leal, L.E.

1995-01-01

The WIMSD4 code has been adopted for cross-section generation in support of the Reduced Enrichment Research and Test Reactor (RERTR) program at Argonne National Laboratory (ANL). Subsequently, the code has undergone several updates, and significant improvements have been achieved. The capability of generating group-collapsed micro- or macroscopic cross sections from the ENDF/B-V library and the more recent evaluation, ENDF/B-VI, in the ISOTXS format makes the modified version of the WIMSD4 code, WIMSD4M, very attractive, not only for the RERTR program, but also for the reactor physics community. The intent of the present paper is to validate the WIMSD4M cross-section libraries for reactor modeling of fresh water moderated cores. The results of calculations performed with multigroup cross-section data generated with the WIMSD4M code will be compared against experimental results. These results correspond to calculations carried out with thermal reactor benchmarks of the Oak Ridge National Laboratory (ORNL) unreflected HEU critical spheres, the TRX LEU critical experiments, and calculations of a modified Los Alamos HEU D 2 O moderated benchmark critical system. The benchmark calculations were performed with the discrete-ordinates transport code, TWODANT, using WIMSD4M cross-section data. Transport calculations using the XSDRNPM module of the SCALE code system are also included. In addition to transport calculations, diffusion calculations with the DIF3D code were also carried out, since the DIF3D code is used in the RERTR program for reactor analysis and design. For completeness, Monte Carlo results of calculations performed with the VIM and MCNP codes are also presented

Validation of the WIMSD4M cross-section generation code with benchmark results

Energy Technology Data Exchange (ETDEWEB)

Deen, J.R.; Woodruff, W.L. [Argonne National Lab., IL (United States); Leal, L.E. [Oak Ridge National Lab., TN (United States)

1995-01-01

The WIMSD4 code has been adopted for cross-section generation in support of the Reduced Enrichment Research and Test Reactor (RERTR) program at Argonne National Laboratory (ANL). Subsequently, the code has undergone several updates, and significant improvements have been achieved. The capability of generating group-collapsed micro- or macroscopic cross sections from the ENDF/B-V library and the more recent evaluation, ENDF/B-VI, in the ISOTXS format makes the modified version of the WIMSD4 code, WIMSD4M, very attractive, not only for the RERTR program, but also for the reactor physics community. The intent of the present paper is to validate the WIMSD4M cross-section libraries for reactor modeling of fresh water moderated cores. The results of calculations performed with multigroup cross-section data generated with the WIMSD4M code will be compared against experimental results. These results correspond to calculations carried out with thermal reactor benchmarks of the Oak Ridge National Laboratory (ORNL) unreflected HEU critical spheres, the TRX LEU critical experiments, and calculations of a modified Los Alamos HEU D{sub 2}O moderated benchmark critical system. The benchmark calculations were performed with the discrete-ordinates transport code, TWODANT, using WIMSD4M cross-section data. Transport calculations using the XSDRNPM module of the SCALE code system are also included. In addition to transport calculations, diffusion calculations with the DIF3D code were also carried out, since the DIF3D code is used in the RERTR program for reactor analysis and design. For completeness, Monte Carlo results of calculations performed with the VIM and MCNP codes are also presented.

Crowdfunding Campaigns Help Researchers Launch Projects and Generate Outreach

Directory of Open Access Journals (Sweden)

Katherine Dahlhausen

2015-11-01

Full Text Available Organizers of participatory research (citizen science projects can generate funds and outreach through crowdfunding. Here we provide insights from three successful science crowdfunding campaigns recently completed on Indiegogo, Experiment, and Kickstarter. Choosing a crowdfunding platform that fits the project is just the beginning; a successful campaign reflects its content, management, and marketing, and some researchers may need to acquire new skills. In addition, the growing trend of crowdfunding for science reinforces the importance of academic engagement with social media.

Results of the research on electrode and insulation wall material in fiscal 1977. Large scale technological development 'R and D on magneto hydrodynamic generation'; 1977 nendo denkyoku oyobi zetsuenheki zairyo ni kansuru kenkyu seika

Energy Technology Data Exchange (ETDEWEB)

NONE

1978-06-01

Results of research in fiscal 1977 were compiled concerning electrodes and insulation wall materials, the research conducted by the material working group of the magneto hydrodynamic (MHD) generation R and D liaison conference. Researches on trial manufacturing of duct materials for MHD generation were conducted for a Si{sub 3}N{sub 4}-MgO, Si{sub 3}N{sub 4}-Spinel, Spinel and Sialon based insulation wall material, MgO-BN based insulation wall material, tin oxide based electrode material, cold press ZrO{sub 2}-CeO{sub 2} and ZrO{sub 2}-Y{sub 2}O{sub 2} based electrode material, hot press hot hydrostatic pressure ZrO{sub 2}-CeO{sub 2} based electrode material, cermet based electrode material, etc. In the investigation and measurement of basic characteristics, these materials were put through various tests such as 1,300 degree C-300 hr-K{sub 2}SO{sub 4} immersion test, thermal shock resistance, thermal expansibility, oxidation resistance of oxide/nitride based materials. In addition, selection of materials for MHD generation, as well as the examination and degradation analysis of dynamic characteristics, was carried out by simulation of MHD generation, which provided data of various electrodes such as consumption, electrical characteristics (electrode lowering voltage, critical current, etc.) and thermal characteristics (surface temperature, heat flow velocity, etc.) (NEDO)

Research by design: honouring the Stolen Generation a theoretical anti-memorial

OpenAIRE

Sue-Anne Ware

1999-01-01

This paper discusses theoretical design frameworks and research methods for contemporary memorial design. It is a case study for research by design, an expanding area of design discourse, which offers an alternative to quantitative research practices and 'scientific' methodologies. It expands upon a design research studio, which explored formal design outcomes for an anti-memorial to The Stolen Generation. This essay focuses on ideas about progressive memorial design which prompts multiple re...

French wind power generation programme EOLE 2005 - first results

Energy Technology Data Exchange (ETDEWEB)

Laali, A.R. [Electricite de France (EDF), Chatou (France); Benard, M. [Electricite de France (EDF), Paris (France)

1997-12-31

EOLE 2005 has been launched in July 1996 by the French Ministry of Industry, Electricite de France and ADEME (Agency for Environment and Energy Management). The Ministries of Research and Environment are participating also in this programme. The purpose is to create an initial market in France for wind power generation in order to evaluate the cost-effectiveness and the competitiveness of the wind energy compared to other energy sources by 2005. The installed capacity will reach at least 250 MW and possibly 500 MW.

Prompt-period measurement of the Annular Core Research Reactor prompt neutron generation time

International Nuclear Information System (INIS)

Coats, R.L.; Talley, D.G.; Trowbridge, F.R.

1994-07-01

The prompt neutron generation time for the Annular Core Research Reactor was experimentally determined using a prompt-period technique. The resultant value of 25.5 μs agreed well with the analytically determined value of 24 μs. The three different methods of reactivity insertion determination yielded ±5% agreement in the experimental values of the prompt neutron generation time. Discrepancies observed in reactivity insertion values determined by the three methods used (transient rod position, relative delayed critical control rod positions, and relative transient rod and control rod positions) were investigated to a limited extent. Rod-shadowing and low power fuel/coolant heat-up were addressed as possible causes of the discrepancies

Research results of the Optimiturve research program in 1991

International Nuclear Information System (INIS)

Alakangas, E.

1992-01-01

Optimiturve research program is one of the energy research programs funded by the Ministry of Trade and Industry of Finland. The main target of the program is double the annual hectare yield of peat dried by solar radiation to decrease the peat production costs, to speed up the circulation of capital invested to peat production with the aid of a new production method developed in this research, and hence improve the price competitivity of peat. The targets of the research program are expected to be completed by improving the drying of peat, the efficiency of the peat production machinery, and by developing peat production techniques. The program was started in 1988, and the targets are to be fulfilled up to year 1993. The research program is carried out in cooperation with universities, research organizations and peat producers. This publication consists of the results of the ongoing projects in the Optimiturve research program in 1991. The aim, the contents and the main results of the 18 projects are presented. At the end of this publication there is a list of the reports published in Reports series

Experimental Research on the Characteristic of a Generator Used in Wave Energy Conversion

Science.gov (United States)

Lu, Zhongyue; Shang, Jianzhong; Luo, Zirong; Sun, Chongfei; Wu, Guoheng

2018-01-01

Due to the environmental issues like global warming and pollution, the exploration for ocean energy becomes important. Selecting the suitable generator for wave energy generation system is essential to improve the efficiency of power generation system. Thus, the object of the research is the generator of a self-adaptation inversion type wave energy absorption device. The major focus of this paper is the characteristics and the technique of the generator used in prototype. By setting up the generator performance test platform, the output voltage, efficiency and performance of the generator are tested to select the suitable generator for the wave energy generating system.

Outline of fiscal 1969 achievements in research on MHD power generation; 1969 nendo MHD hatsuden kenkyu seika gaiyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1969-07-01

Compiled are the results of studies conducted in fiscal 1969 on MHD (magnetohydrodynamic) power generation. In the operation test and modification of the 1,000kW-class MHD power generator, the operation test continues from the preceding fiscal year using high-temperature air as oxidant, and the growth of boundary layer in the channel is determined. In the operation test of the MHD power generator designed for prolonged operation, insulation walls, electrode materials, and structures capable of prolonged operation are developed and tested. In the research of MHD power generator heat exchangers, studies are made about the bulkhead type and heat accumulator types (stationary type, rotary type, and falling-grain type). In addition, studies are conducted about seed collecting methods, MHD power generator electrode materials, heat-resisting insulators, and thermal performance rating. In the research and development of superconductive electromagnets, studies are conducted about superconductive electromagnets for 1kW MHD power generators, ferromagnetic superconductive electromagnets for 1,000kW-class MHD power generators, 45-kilogauss col type superconductive electromagnets, turbine type helium liquefier, high current density col type superconductive electromagnets, superinsulated magnetic field generators, etc. (NEDO)

Career Advancement: Meeting the Challenges Confronting the Next Generation of Endocrinologists and Endocrine Researchers.

Science.gov (United States)

Santen, Richard J; Joham, Anju; Fishbein, Lauren; Vella, Kristen R; Ebeling, Peter R; Gibson-Helm, Melanie; Teede, Helena

2016-12-01

Challenges and opportunities face the next generation (Next-Gen) of endocrine researchers and clinicians, the lifeblood of the field of endocrinology for the future. A symposium jointly sponsored by The Endocrine Society and the Endocrine Society of Australia was convened to discuss approaches to addressing the present and future Next-Gen needs. Data collection by literature review, assessment of previously completed questionnaires, commissioning of a new questionnaire, and summarization of symposium discussions were studied. Next-Gen endocrine researchers face diminishing grant funding in inflation-adjusted terms. The average age of individuals being awarded their first independent investigator funding has increased to age 45 years. For clinicians, a workforce gap exists between endocrinologists needed and those currently trained. Clinicians in practice are increasingly becoming employees of integrated hospital systems, resulting in greater time spent on nonclinical issues. Workforce data and published reviews identify challenges specifically related to early career women in endocrinology. Strategies to Address Issues: Recommendations encompassed the areas of grant support for research, mentoring, education, templates for career development, specific programs for Next-Gen members by senior colleagues as outlined in the text, networking, team science, and life/work integration. Endocrine societies focusing on Next-Gen members provide a powerful mechanism to support these critical areas. A concerted effort to empower, train, and support the next generation of clinical endocrinologists and endocrine researchers is necessary to ensure the viability and vibrancy of our discipline and to optimize our contributions to improving health outcomes. Collaborative engagement of endocrine societies globally will be necessary to support our next generation moving forward.

Research culture and capacity in community health services: results of a structured survey of staff.

Science.gov (United States)

Friesen, Emma L; Comino, Elizabeth J

2017-05-01

Developing research capacity is recognised as an important endeavour. However, little is known about the current research culture, capacity and supports for staff working in community-based health settings. A structured survey of Division of Community Health staff was conducted using the research capacity tool. The survey was disseminated by email and in paper format. Quantitative data were analysed using descriptive statistics. Qualitative data were analysed thematically. In total, 109 usable responses were received, giving a response rate of 26%. Respondents were predominately nurses (n=71, 65.7%), with ~50% reporting post-graduate vocational qualifications. The highest levels of skills or organisational success were in using evidence to plan, promote and guide clinical practice. Most participants were unsure of organisational and team level skills and success at generating research. Few reported recent experience in research-generating activities. Barriers to undertaking research included lack of skills, time and access to external support and funding. Lack of skills and success in accessing external funding and resources to protect research time or to 'buy-in' technical expertise appeared to exacerbate these barriers. Community health staff have limited capacity to generate research with current levels of skill, funding and time. Strategies to increase research capacity should be informed by knowledge of clinicians' research experience and interests, and target development of skills to generate research. Resources and funding are needed at the organisational and team levels to overcome the significant barriers to research generation reported.

New Dimensions of Research on Actinomycetes: Quest for Next Generation Antibiotics

Directory of Open Access Journals (Sweden)

Polpass Arul Jose

2016-08-01

Full Text Available Starting with the discovery of streptomycin, the promise of natural products research on actinomycetes has been captivat¬ing researchers and offered an array of life-saving antibiotics. However, most of the actinomycetes have received a little attention of researchers beyond isolation and activity screening. Noticeable gaps in genomic information and associated biosynthetic potential of actinomycetes are mainly the reasons for this situation, which has led to a decline in the discovery rate of novel antibiotics. Recent insights gained from genome mining have revealed a massive existence of previously unrecognized biosynthetic potential in actinomycetes. Successive developments in next-generation sequencing, genome editing, analytical separation and high-resolution spectroscopic methods have reinvigorated interest on such actinomycetes and opened new avenues for the discovery of natural and natural-inspired antibiotics. This article describes the new dimensions that have driven the ongoing resurgence of research on actinomycetes with historical background since the commencement in 1940, for the attention of worldwide researchers. Coupled with increasing advancement in molecular and analytical tools and techniques, the discovery of next-generation antibiotics could be possible by revisiting the untapped potential of actinomycetes from different natural sources.

FY 1978 Annual report on Sunshine Project results. Survey and research on systems utilizing solar energy (Photovoltaic power generation systems); 1978 nendo taiyo energy riyo system chosa kenkyu seika hokokusho. Taiyoko hatsuden system

Energy Technology Data Exchange (ETDEWEB)

NONE

1979-03-01

This survey report provides the basic data for planning national projects to smoothly raise the large industry of solar cell industry in the future by studying how to promote the research and development projects for this area, continuously pursued from the establishment of the Sunshine Project. This report clarifies, first of all, the concept of long-term schedules for research and development of solar thermal power generation systems, based on which technical themes are concretely surveyed, and their economic viability and ripple effects on the other industries are analyzed. The industry of solar thermal power generation systems is a new industry, even based on the global horizons, backed up by the Japan's high-technological areas of electronics and semiconductor industries. It is one of important projects to be urgently developed, also viewed from the above standpoint. This report describes the long-term visions of solar thermal power generation systems, and the research and development projects therefor; stock materials for solar cells and problems involved therein; research and development projects for low-cost solar cells; photovoltaic power generation systems, and the research and development projects therefor; conceptual designs of photovoltaic power generation systems; and standard analytical procedures for solar cells, and technical problems involved therein. (NEDO)

FY 1978 Annual report on Sunshine Project results. Survey and research on systems utilizing solar energy (Photovoltaic power generation systems); 1978 nendo taiyo energy riyo system chosa kenkyu seika hokokusho. Taiyoko hatsuden system

Energy Technology Data Exchange (ETDEWEB)

NONE

1979-03-01

This survey report provides the basic data for planning national projects to smoothly raise the large industry of solar cell industry in the future by studying how to promote the research and development projects for this area, continuously pursued from the establishment of the Sunshine Project. This report clarifies, first of all, the concept of long-term schedules for research and development of solar thermal power generation systems, based on which technical themes are concretely surveyed, and their economic viability and ripple effects on the other industries are analyzed. The industry of solar thermal power generation systems is a new industry, even based on the global horizons, backed up by the Japan's high-technological areas of electronics and semiconductor industries. It is one of important projects to be urgently developed, also viewed from the above standpoint. This report describes the long-term visions of solar thermal power generation systems, and the research and development projects therefor; stock materials for solar cells and problems involved therein; research and development projects for low-cost solar cells; photovoltaic power generation systems, and the research and development projects therefor; conceptual designs of photovoltaic power generation systems; and standard analytical procedures for solar cells, and technical problems involved therein. (NEDO)

Towards generating ECSS-compliant fault tree analysis results via ConcertoFLA

Science.gov (United States)

Gallina, B.; Haider, Z.; Carlsson, A.

2018-05-01

Attitude Control Systems (ACSs) maintain the orientation of the satellite in three-dimensional space. ACSs need to be engineered in compliance with ECSS standards and need to ensure a certain degree of dependability. Thus, dependability analysis is conducted at various levels and by using ECSS-compliant techniques. Fault Tree Analysis (FTA) is one of these techniques. FTA is being automated within various Model Driven Engineering (MDE)-based methodologies. The tool-supported CHESS-methodology is one of them. This methodology incorporates ConcertoFLA, a dependability analysis technique enabling failure behavior analysis and thus FTA-results generation. ConcertoFLA, however, similarly to other techniques, still belongs to the academic research niche. To promote this technique within the space industry, we apply it on an ACS and discuss about its multi-faceted potentialities in the context of ECSS-compliant engineering.

Reports on 1979 result of Sunshine Project. Investigation and research on solar energy utilization system (solar thermal power generation system); 1979 nendo taiyo energy riyo system chosa kenkyu seika hokokusho. Taiyonetsu hatsuden system

Energy Technology Data Exchange (ETDEWEB)

NONE

1980-03-01

An investigation and research were conducted on the operation method of various solar thermal power generation systems and on the evaluation of the rating and cost performance; in the environmental test method for the equipment, the examination was continued for the test method and evaluation method concerning the absorbing surface and transmitting film; in the heat storing technology, an investigative research was done on the optimum heat storing method and energy conversion method suitable for the operation of the thermal power generation system, as well as performing, as an objective, a computer simulation on the total system with the purpose of clarifying the heat storing capacity. The results in the year were as follows. The operation method for solar thermal power generation was examined, as were the energy analysis, evaluation method of 1 MW pilot plant, the optimum utilization system of solar energy in the long run including its application, and technological economical problems to be solved for the next large solar thermal power generating plant. A discussion was carried out on the endurance test of the selective absorbing surface and transmitting film and on the durability of the reflection mirror. Evaluation and examination were made on the various materials of the 1 MW pilot plant. A review was done on various heat accumulating devices for solar thermal generation, mathematical thermal characteristics of heat accumulating devices, and future energy storing methods and problems. (NEDO)

Outline of fiscal 1967 achievements in research on MHD power generation; 1967 nendo MHD hatsuden kenkyu seika gaiyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1968-09-01

Compiled are the results of studies conducted in fiscal 1967 on MHD (magnetohydrodynamic) power generation. In the test operation and modification of a 1,000kW-class MHD power generator at the Electrical Research Laboratory, a test is conducted using Faraday-type electrodes. It is then found that this configuration results in a maximum output of approximately 700kW, which is less than expected. In the experimental construction at the Hitachi, Ltd., of a machine capable of a long-term operation, an MHD power generator is built for a continuous operation of 100 hours with an maximum output of 2kW, and a 110-hour power generation is successfully achieved with a maximum output of 1.9kW. In the research and development of heat exchangers, tests are conducted for a bulkhead type heat exchanger, heat accumulator type heat exchanger, molten slag type heat exchanger, and a gas/liquid 2-phase flow type heat exchanger. In the study of heat-resisting insulators, materials based on zirconate, magnesia, thoria, zirconia, etc., are tested. In addition, studies are conducted on electrode materials, superconductive electromagnets (small superconductive electromagnets for MHD power generators, turbine type helium liquefiers, superconductive wires for 70-kilogauss electromagnets, etc.), and thermal performance rating. (NEDO)

Reports on 1979 result of Sunshine Project. Testing research for detailed design of solar thermal power generation plant (tower converging method); 1979 nendo taiyonetsu hatsuden plant (tower shuko hoshiki) no shosai sekkei no tame no shiken kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1980-03-31

This report briefly describes first, in the summary of the results, the contents of the research results of the year with the outcome as the central point. Then, it explains in detail, in the contents of the research, the substance of each research item, results, their examination contents, and future research subjects. The objective of the research is, for the purpose of technically seeking the cost performance of a solar thermal power generation plant, (1) to develop equipment constituting the plant and (2) to develop a pilot plant having an electrical output of about 1,000kW at the peak by the tower converging method. The research results were as follows. (1) In the confirming test of a heliostat test unit, the final conclusion was obtained of the wind resistance calculated value by the wind tunnel test of the heliostat; the design materials of the assembly jigs were obtained; the data of the operation forecast was obtained in a tracking test; and a sensor was developed for the tracking instrumentation. (2) In the confirming test of the improved absorbing surface/mirror, the improvement/trial production including the manufacturing method was carried out as the absorbing surface for the actual unit. (3) In the heat collecting test, steam generation and a loop control test were performed. (4) The plant system was analyzed, with data obtained for the operating method. (NEDO)

Challenges and Difficulties to Teaching Engineering to Generation Z: A Case Research

Science.gov (United States)

Correia Barreiro, Suamit; Bozutti, Daniel Fernando

2017-01-01

Many people from generation Z are at the beginning of their academic activities. This generation has peculiar characteristics that might be a challenge in the labor market. Thus, instructors have a great role in their preparation. However, professors might face difficulties dealing with their specific characteristics. The research aims to carry…

NHash: Randomized N-Gram Hashing for Distributed Generation of Validatable Unique Study Identifiers in Multicenter Research.

Science.gov (United States)

Zhang, Guo-Qiang; Tao, Shiqiang; Xing, Guangming; Mozes, Jeno; Zonjy, Bilal; Lhatoo, Samden D; Cui, Licong

2015-11-10

A unique study identifier serves as a key for linking research data about a study subject without revealing protected health information in the identifier. While sufficient for single-site and limited-scale studies, the use of common unique study identifiers has several drawbacks for large multicenter studies, where thousands of research participants may be recruited from multiple sites. An important property of study identifiers is error tolerance (or validatable), in that inadvertent editing mistakes during their transmission and use will most likely result in invalid study identifiers. This paper introduces a novel method called "Randomized N-gram Hashing (NHash)," for generating unique study identifiers in a distributed and validatable fashion, in multicenter research. NHash has a unique set of properties: (1) it is a pseudonym serving the purpose of linking research data about a study participant for research purposes; (2) it can be generated automatically in a completely distributed fashion with virtually no risk for identifier collision; (3) it incorporates a set of cryptographic hash functions based on N-grams, with a combination of additional encryption techniques such as a shift cipher; (d) it is validatable (error tolerant) in the sense that inadvertent edit errors will mostly result in invalid identifiers. NHash consists of 2 phases. First, an intermediate string using randomized N-gram hashing is generated. This string consists of a collection of N-gram hashes f1, f2, ..., fk. The input for each function fi has 3 components: a random number r, an integer n, and input data m. The result, fi(r, n, m), is an n-gram of m with a starting position s, which is computed as (r mod |m|), where |m| represents the length of m. The output for Step 1 is the concatenation of the sequence f1(r1, n1, m1), f2(r2, n2, m2), ..., fk(rk, nk, mk). In the second phase, the intermediate string generated in Phase 1 is encrypted using techniques such as shift cipher. The result

Progress on management business system of LLW generated from research and industrial nuclear facilities

International Nuclear Information System (INIS)

Izumida, Tatsuo

2014-01-01

RANDEC has been studying a management business system of LLW (Low Level Waste) generated from research and industrial facilities since 2008. To examine economical problems, the income and expenditure of LLW treatment business was simulated. As a result, raising method of the funds which is required in preparatory stage of LLW treatment business is an obvious issue to carry out as public utility works. (author)

The Scientific Research in Libya: The Role of the New Generation of Researchers

Directory of Open Access Journals (Sweden)

Tashani OA

2009-01-01

Full Text Available There is a potential for improving the scientific research environment in Libya. One reason to be optimistic about the prospects of the future of science in Libya is the number of postgraduate students in all disciplines who are training in European and North American Universities. According to statistics of the Higher Education Authorities in Libya, there are approximately 3000 Libyan students enrolled in postgraduate studies in British universities alone and almost half of this number in North America [1]. However, research output of Libyan universities’ academic staff members is still very low. For example, a recent survey of published medical literature revealed that the average annual production rate at the Al-Fateh Medical University is 1.4 article/100 academic staff [2]. In my opinion, four major reasons may explain the problems facing scientific research in Arab countries in general and in Libya in particular: 1 Brain Drain 2 Lack of funding 3 Lack of scientific infrastructure and incompetent supportive staff, and 4 Teaching overload. I will discuss the role that the new generation of Libyan researchers* could play to advance the scientific research output in Libya.

Alternative technologies for 99Tcm generators. Final report of a co-ordinated research programme 1990-1994

International Nuclear Information System (INIS)

1995-12-01

99 Tc m is the workhorse of nuclear medicine and currently accounts for over 80% of all in vivo diagnostic procedures. This radionuclide is made available to nuclear medicine centers in the form of a generator wherein the parent 99 Mo (generally produced by the fission of 235 U) is retained on a column of alumina and the daughter 99 Tc m produced by the decay of 99 Mo is separated out by elution of the column with saline solution. Fission 99 Mo is now routinely produced only in a few large production centers in the world and the short half-life of 99 Mo poses transportation problems. Recognizing the need to develop alternative technologies for the production of 99 Tc m generators in developing Member States operating medium neutron flux research reactors, the IAEA initiated a co-ordinated research programme (CRP) in 1983. As a result of the work carried out under the auspices of this CRP (1983-1989), it became apparent that technologies based on low temperature sublimation processes and polymolybade gels showed excellent potential for the preparation of reliable and economical 99 Tc m generators. Generators based on elution of polymolybade gels have since been developed and evaluated. Further, based on their own research work and publication from other sources, the experts who participated in this CRP have made a detailed evaluation of other possible alternative technologies for the production of 99 Tc m generators using 99 Mo produced by the non-fission route. 24 refs, 16 figs

Neutron generators and their uses in research and applied fields. Vol. 1

Energy Technology Data Exchange (ETDEWEB)

Asfour, F I [Division of Basic Nuclear Sciences, Nuclear Research Center, Atomic Energy Authority, Cairo (Egypt)

1996-03-01

The development of the low voltage neutron generators (NGS) has contributed considerably to the scope of nuclear research and the economical application of nuclear methods. Such simple instruments are used to produce 14 MeV and 3 MeV neutrons via the 3{sup H}(d,n)4{sup H}e and 2{sup H}(d,n)3{sup H}e reactions,respectively. The neutrons are very widely used and are inexpensive, easy to install and operate, therefore, in addition to nuclear physicists, there are a number of groups of scientists who use low voltage accelerators as tools for pure and applied research, service and education. The aim of this work is to review shortly those problems and methods of science and technology where the neutrons produced in the D-T and D-D reactions play the main role. A wide range of experiments with the detection of neutrons and charged particles is available including the study of shielding and the generator technology itself. N.G. are recently widely used for the determination of neutron data needed for fast reactor and thermonuclear devices. The principles and techniques of the possible uses of neutron generators in technology and research are summarized. The review is devoted to:- Give a short review of the most important operational characteristics of the neutron generators and the necessary instruments needed for application. Outline the main applications of the neutron generators in neutron activation and prompt radiation analysis in various fields(metallurgy, chemistry, biology, meteoritic and lunar studies, geology and mining, etc...) fast neutron therapy, and radiation effects. 2 figs.

Emerging uses of patient generated health data in clinical research.

Science.gov (United States)

Wood, William A; Bennett, Antonia V; Basch, Ethan

2015-05-01

Recent advancements in consumer directed personal computing technology have led to the generation of biomedically-relevant data streams with potential health applications. This has catalyzed international interest in Patient Generated Health Data (PGHD), defined as "health-related data - including health history, symptoms, biometric data, treatment history, lifestyle choices, and other information-created, recorded, gathered, or inferred by or from patients or their designees (i.e. care partners or those who assist them) to help address a health concern."(Shapiro et al., 2012) PGHD offers several opportunities to improve the efficiency and output of clinical trials, particularly within oncology. These range from using PGHD to understand mechanisms of action of therapeutic strategies, to understanding and predicting treatment-related toxicity, to designing interventions to improve adherence and clinical outcomes. To facilitate the optimal use of PGHD, methodological research around considerations related to feasibility, validation, measure selection, and modeling of PGHD streams is needed. With successful integration, PGHD can catalyze the application of "big data" to cancer clinical research, creating both "n of 1" and population-level observations, and generating new insights into the nature of health and disease. Copyright © 2014 Federation of European Biochemical Societies. Published by Elsevier B.V. All rights reserved.

Visual Literacy and Science Education: Results of a Qualitative Research Project

Directory of Open Access Journals (Sweden)

Regula Fankhauser

2008-10-01

Full Text Available In the didactics of science the role of pictures—mainly photographs and diagrams—as learning media and their function in the acquisition of knowledge have been discussed. However, the specific problems understanding pictures have seldom been reflected systematically. The aim of the project described in this paper was to address this deficiency. In a first step I refer to theoretical concepts of understanding pictures that were generated within the context of qualitative social research. Next I generate a theoretical model of visual literacy. The focus is on the understanding of pictures used in science education. The model includes aesthetic, epistemological, technical, and pragmatic dimensions. This model was then empirically tested. Thirty-five students were interviewed regarding their reception of scientific pictures. The results reveal that students have difficulties in describing the aesthetic features of pictures. The interviews clarified the epistemological frame theory on which picture understanding is based: most of the students consider the picture as a realistic copy of the object represented. Only a few students showed a more constructivist frame theory. Furthermore, the results revealed no connection between the epistemological theory and the technical knowledge of the students. The discussion of the design and the method of interpretation reflects the results of the study; the students' patterns of picture understanding are surprisingly homogeneous. On the one hand this could be reduced to the method of content analysis; on the other hand it could be an effect of the single sided view of the design. I explored only the subjective reception of pictures. Further research must consider other perspectives and focus on the way teachers work with visual material in classroom teaching. URN: urn:nbn:de:0114-fqs090129

Comparing Generation X and Generation Y on their preferred emotional leadership style

OpenAIRE

Kraus, Markus

2017-01-01

Research Question: What are the differences and similarities between employees of Generation X and Gen-eration Y and do these generations prefer different emotional leadership styles? Methods: Empirical study across different organizations using an online survey to examine potential dif-ferences in the emotional leadership style preferences of Generation X and Y. Results: The results of the theoretical part demonstrate an increasing tendency of similarities between Generation X and Y with res...

Network integration of distributed generation: international research and development

Energy Technology Data Exchange (ETDEWEB)

Watson, J.

2003-07-01

This report provides information on privately and publicly funded research and development programmes in distributed generation (DG) in the USA, the European Union and Japan. Protection systems for the installation of DG, power electronics for the connection of DG to electricity distribution systems, reliability modelling, power quality issues, connection standards, and simulation and computer modelling are examined. The relevance of the programmes to the UK is considered.

Report on demonstrative research on photovoltaic power generation system in Myanmar

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With an objective of installation and demonstrative operation in Myanmar of a power generation system combining a small-scale photovoltaic power generation system, a wind power generation system, and a diesel generator, research and development is being made under a six year plan starting in 1999 and ending in 2004. Comparative discussions were given on the installation location of the power generation system for the climatic conditions in Chaungthar and Letkhokekone, whereas the final decision was given on Chaungthar. This project plans installation of a photovoltaic power generation system of 80 kW, a wind power generation system of 40 kW, and a diesel generator of 60 kW. Power generation will start at 6 o'clock in the morning and continue to 11 o'clock at night every day, with a storage battery of 1,000 Ah and a stabilized load comprising of ice maker units to be installed. Observation of wind power and solar insolation is being continued with an aim of acquiring data over a period of one year or longer, whereas the data as have been forecasted are being acquired at the present. The diesel generator was manufactured in Japan, which has been arrived at the port of Yangon in February 2001, and installed at the site in Chaungthar in March. (NEDO)

Generation Y students’ attitudes towards facebook advertising: pilot study results

OpenAIRE

Hilda Bongazana Mahlangu; Ayesha Lian Bevan-Dye

2013-01-01

The purpose of this paper is to report on the results of a pilot study conducted on the determinants and inhibitors of Generation Y students’ attitudes towards Facebook advertising. The findings suggest that Generation Y students have a positive attitude towards the information value, entertainment value, credibility, self-brand congruity of advertising on Facebook and attitude towards the social interaction value of Facebook. Their attitudes towards trust in the site and trust in the members...

Main results of assessing integrity of RNPP-3 steam generator heat exchange tubes in accident management

International Nuclear Information System (INIS)

Shugajlo, Al-j P.; Mustafin, M.A.; Shugajlo, Al-r P.; Ryzhov, D.I.; Zhabin, O.I.

2017-01-01

Tubes integrity evaluation under accident conditions considering drain of SG and current technical state of steam exchange tubes is an important question regarding SG long-term operation and improvement of accident management strategy.The main investigation results prepared for heat exchange surface of RNPP-3 steam generator are presented in this research aimed at assessing integrity of heat exchange tubes under accident conditions, which lead to full or partial drain of heat exchange surface, in particular during station blackout.

Fiscal 1974 Sunshine Project result report. Research on solar energy utilization systems (solar heat power generation); 1974 nendo taiyo energy riyo system chosa kenkyu seika hokokusho. Taiyonetsu hatsuden

Energy Technology Data Exchange (ETDEWEB)

NONE

1975-03-01

This report summarizes the fiscal 1974 research result on solar heat power generation. The following are promising as solar heat power plant sites in Japan: Large-scale sites such as the foot of volcanos, riverbed, railway site and road, medium-scale sites such as isolated island, saltpan site and industrial park, and small-scale sites such as factory site, factory roof floor, housing complex, warehouse and school. Based on the primary concept design of both curved reflector type and tower type 1,000kW class solar heat power plants, various requirements were clarified roughly. It was clarified that food, fiber and non-ferrous metal factories can cover 80-90% of their thermal energy requirements with high- temperature solar heat, while factories related to food and fiber can cover even nearly 100% of their electric power requirements with solar heat. Study was also made on specifications of a solar simulator as common use facility necessary for characteristic evaluation of equipment and materials for solar heat power generation systems. (NEDO)

The era of the wandering mind? Twenty-first century research on self-generated mental activity

Directory of Open Access Journals (Sweden)

Felicity eCallard

2013-12-01

Full Text Available The first decade of the twenty-first century was characterized by renewed scientific interest in self-generated mental activity (activity largely generated by the individual, rather than in response to experimenters’ instructions or specific external sensory inputs. To understand this renewal of interest, we interrogated the peer-reviewed literature from 2003–2012 (i to explore recent changes in use of terms for self-generated mental activity; (ii to investigate changes in the topics on which mind wandering research, specifically, focuses; and (iii to visualize co-citation communities amongst researchers working on self-generated mental activity. Our analyses demonstrated that there has been a dramatic increase in the term mind wandering, and a significant crossing-over of psychological investigations of mind wandering, specifically, into cognitive neuroscience. If this is, indeed, the ‘era of the wandering mind’, our paper calls for more explicit reflection to be given by mind wandering researchers to the terms they use, the topics and brain regions they focused on, and the research literatures that they implicitly foreground or ignore as not relevant.

Report on demonstrative research on photovoltaic power generation system in Myanmar. Appendices

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With an objective of installation and demonstrative operation in Myanmar of a power generation system combining a small-scale photovoltaic power generation system, a wind power generation system, and a diesel generator, research and development is being made under a six year plan starting in 1999 and ending in 2004. This paper compiles the appendices related thereto. Collected for the climatic observation are the insolation data and wind velocity data in Chaungthar, and the insolation graph in both of Chaungthar and Lethokekone. Furthermore, materials for selection and decision on the installation location, and design materials for a hybrid power generation system were collected. Collected for procurement, construction, and installation of devices and facilities include test data for the diesel generator, drawings for the power generation control panel, test operation report, bill of lading for the diesel generator, a completion certificate of the diesel generator building, photographs of the building, a certificate of completion of installation of the diesel generator, photographs taken during the installation work, a certificate of completion of power transmission cable installation, photographs of the installation works, and the operation manual for the diesel engine. (NEDO)

The use of NPAR [Nuclear Plant Aging Research] results in plant inspection activities

International Nuclear Information System (INIS)

Gunther, W.; Taylor, J.

1989-01-01

The Nuclear Plant Aging Research (NPAR) Program is a hardware oriented research program which has produced a large data base of equipment and system operating, maintenance, and testing information. A review of the NRC Inspection Program and discussions with NRC inspection personnel have revealed several areas where NPAR research results would be valuable to the inspector. This paper describes the NPAR information which can enhance inspection activities, and provides alternatives for making these pertinent research results available to the inspectors. The NRC Inspection Program emphasis is on evaluating the performance of licensees by focusing on requirements and standards associated with administrative, managerial, engineering, and operational aspects of licensee activities. The Program recognizes that licensees may satisfy NRC requirements differently, and therefore expresses inspection guidance in the form of performance objectives and evaluation criteria. for the resident and regional inspectors, procedures have been written covering various subject areas, such as operations, maintenance, and surveillance. Some of these procedures contain guidance related to aging degradation. The types of information generated by NPAR which were found to be relevant to inspection needs include the following: functional indicators; failure modes, causes, effects; stresses which cause degradation; maintenance recommendations; inspection prioritization. 3 refs

FY 1977 Annual report on Sunshine Project results. Research and development of photovoltaic power generation systems (Research and development of vertically drawn ribbon crystals of silicon); 1977 nendo taiyoko hatsuden system no kenkyu kaihatsu seika hokokusho. Silicon tatehiki ribon kessho no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1978-03-31

This project is aimed at establishment of ribbon crystal production techniques and development of photovoltaic power generation systems incorporating the ribbon crystals, in order to greatly reduce cost of photovoltaic power generation systems. The research efforts in this fiscal year is focused on development of the techniques for continuously growing the ribbons, to attain the above goal by accelerating growth of the ribbon crystals in unit time and clarifying, in the early stage, the problems to be solved before commercializing the ribbon crystals for the future solar cells. The major research results are (1) development of the method for vertically drawing ribbon crystals of silicon, and (2) analysis of the vertically drawn ribbon crystals of silicon. For the item (1), the technological development efforts are focused on continuously drawing mechanisms and furnace for continuous drawing, with the structural studies as the center for the former and solution of heat-related problems for the latter, which eventually lead to development of a 800 mm long ribbon crystal passing over the roll. For the item (2), the crystal structure is analyzed by the electron channeling pattern method. The results suggest that use of a p-type substrate can improve average efficiency of the ribbon crystal type solar cell. (NEDO)

Extending the Framework of Generativity Theory Through Research: A Qualitative Study.

Science.gov (United States)

Rubinstein, Robert L; Girling, Laura M; de Medeiros, Kate; Brazda, Michael; Hannum, Susan

2015-08-01

Based on ethnographic interviews, we discuss three ideas we believe will expand knowledge of older informants' thoughts about and representations of generativity. We adapt the notion of "dividuality" as developed in cultural anthropology to reframe ideas on generativity. The term dividuality refers to a condition of interpersonal or intergenerational connectedness, as distinct from individuality. We also extend previous definitions of generativity by identifying both objects of generative action and temporal and relational frameworks for generative action. We define 4 foci of generativity (people, groups, things, and activities) and 4 spheres of generativity (historical, familial, individual, and relational) based in American culture and with which older informants could easily identify. The approach outlined here also discusses a form of generativity oriented to the past in which relationships with persons in senior generations form a kind of generative action since they are involved in caring for the origins of the self and hence of future generative acts. These 3 elements of a new framework will allow researchers to pose critical questions about generativity among older adults. Such questions include (a) How is the self, as culturally constituted, involved in generative action? and (b) What are the types of generativity within the context of American culture and how are they spoken about? Each of the above points is directly addressed in the data we present below. We defined these domains through extended ethnographic interviews with 200 older women. The article addresses some new ways of thinking about generativity as a construct, which may be useful in understanding the cultural personhood of older Americans. © The Author 2014. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Identification of Translational Dermatology Research Priorities in the UK; Results of an e-Delphi Exercise

Science.gov (United States)

Healy, E.; Reynolds, N.J.

2016-01-01

Summary Background Translational research is the direct application of basic and applied research to patient care. It is estimated that there are at least 2,000 different skin diseases, thus there are considerable challenges in seeking to undertake research on each of these disorders. Objective This eDelphi exercise was conducted in order to generate a list of translational dermatology research questions which are regarded as a priority for further investigations. Results During the first phase of the eDelphi, 228 research questions were generated by an expert panel which included clinical academic dermatologists, clinical dermatologists, non-clinical scientists, dermatology trainees and representatives from patient support groups. Following completion of the second and third phases, 40 questions on inflammatory skin disease, 20 questions on structural skin disorders / genodermatoses, 37 questions on skin cancer and 8 miscellaneous questions were designated as priority translational dermatology research questions (PRQs). In addition to PRQs on a variety of disease areas (including multiple PRQs on psoriasis, eczema, squamous cell carcinoma (SCC) and melanoma), there were a number of cross-cutting themes which identified a need to investigate mechanisms / pathogenesis of disease and the necessity to improve treatments for patients with skin disease. Conclusion It is predicted that this list of PRQs will help to provide a strategic direction for translational dermatology research in the UK and that addressing this list of questions will ultimately provide clinical benefit for substantial numbers of subjects with skin disorders. PMID:26149834

Waste generated by the future decommissioning of the Magurele VVR-S Research Reactor

International Nuclear Information System (INIS)

Dragolici, F.; Turcanu, C.N.; Dragolici, A.C.

2001-01-01

Nuclear Research Reactor WWR-S from the National Institute of Research and Development for Physics and Nuclear Engineering 'Horia Hulubei', Bucharest-Magurele, was commissioned in July 1957 and it was shut down in December 1997. At the moment the reactor is in conservation state. During its operation this reactor worked at an average power of 2MW, almost 3216 h/year, producing a total thermal power of 230 x 10 3 MWh. No major modifications or improvements were made during the 40 years of operation to the essential parts of the reactor, respective to the primary cooling system, reactor vessel, active core and electronic devices. So, all components of the measure, control and protection systems are old, generally at the technical level of the 1950s, therefore a reason why in December 1997 the operation was ceased. At present, the reactor can be considered, by IAEA definition in the first stage (reactor shut down, but the vital functions are maintained and monitored). The survey is related to the second stage - restrictive use of the area. To develop a real decommissioning project, it was first necessary to evaluate the volume and the characteristics of the radioactive waste which will be generated. Radioactive waste generated during the decommissioning of Magurele WR-S research reactor may be classified as: Activated wastes (internal structures, horizontal channels and thermal column, biological shield); Contaminated wastes (primary circuit non-activated components, hot cells, some technological rooms as main hall, pumps room, radioactive material transfer areas, ventilation building and stack); Possibly contaminated materials from any area of reactor building and ventilation building. After 40 years of nuclear research activities, all such areas are suspected of contamination. The volume of wastes that will result from WWR-S Research Reactor decommissioning is summarized

Automatic generation of investigator bibliographies for institutional research networking systems.

Science.gov (United States)

Johnson, Stephen B; Bales, Michael E; Dine, Daniel; Bakken, Suzanne; Albert, Paul J; Weng, Chunhua

2014-10-01

Publications are a key data source for investigator profiles and research networking systems. We developed ReCiter, an algorithm that automatically extracts bibliographies from PubMed using institutional information about the target investigators. ReCiter executes a broad query against PubMed, groups the results into clusters that appear to constitute distinct author identities and selects the cluster that best matches the target investigator. Using information about investigators from one of our institutions, we compared ReCiter results to queries based on author name and institution and to citations extracted manually from the Scopus database. Five judges created a gold standard using citations of a random sample of 200 investigators. About half of the 10,471 potential investigators had no matching citations in PubMed, and about 45% had fewer than 70 citations. Interrater agreement (Fleiss' kappa) for the gold standard was 0.81. Scopus achieved the best recall (sensitivity) of 0.81, while name-based queries had 0.78 and ReCiter had 0.69. ReCiter attained the best precision (positive predictive value) of 0.93 while Scopus had 0.85 and name-based queries had 0.31. ReCiter accesses the most current citation data, uses limited computational resources and minimizes manual entry by investigators. Generation of bibliographies using named-based queries will not yield high accuracy. Proprietary databases can perform well but requite manual effort. Automated generation with higher recall is possible but requires additional knowledge about investigators. Copyright © 2014 Elsevier Inc. All rights reserved.

Research on Primary Shielding Calculation Source Generation Codes

Science.gov (United States)

Zheng, Zheng; Mei, Qiliang; Li, Hui; Shangguan, Danhua; Zhang, Guangchun

2017-09-01

Primary Shielding Calculation (PSC) plays an important role in reactor shielding design and analysis. In order to facilitate PSC, a source generation code is developed to generate cumulative distribution functions (CDF) for the source particle sample code of the J Monte Carlo Transport (JMCT) code, and a source particle sample code is deveoped to sample source particle directions, types, coordinates, energy and weights from the CDFs. A source generation code is developed to transform three dimensional (3D) power distributions in xyz geometry to source distributions in r θ z geometry for the J Discrete Ordinate Transport (JSNT) code. Validation on PSC model of Qinshan No.1 nuclear power plant (NPP), CAP1400 and CAP1700 reactors are performed. Numerical results show that the theoretical model and the codes are both correct.

Beryllium dust generation resulting from plasma bombardment

International Nuclear Information System (INIS)

Doerner, R.; Mays, C.

1997-01-01

The beryllium dust resulting from erosion of beryllium samples subjected to plasma bombardment has been measured in PISCES-B. Loose surface dust was found to be uniformly distributed throughout the device and accounts for 3% of the eroded material. A size distribution measurement of the loose surface dust shows an increasing number of particles with decreasing diameter. Beryllium coatings on surfaces with a line of sight view of the target interaction region account for an additional 33% of the eroded beryllium material. Flaking of these surface layers is observed and is thought to play a significant role in dust generation inside the vacuum vessel. (orig.)

Why we should talk about option generation in decision-making research.

Science.gov (United States)

Kalis, Annemarie; Kaiser, Stefan; Mojzisch, Andreas

2013-01-01

Most empirical studies on decision-making start from a set of given options for action. However, in everyday life there is usually no one asking you to choose between A, B, and C. Recently, the question how people come up with options has been receiving growing attention. However, so far there has been neither a systematic attempt to define the construct of "option" nor an attempt to show why decision-making research really needs this construct. This paper aims to fill that void by developing definitions of "option" and "option generation" that can be used as a basis for decision-making research in a wide variety of decision-making settings, while clarifying how these notions relate to familiar psychological constructs. We conclude our analysis by arguing that there are indeed reasons to believe that option generation is an important and distinct aspect of human decision-making.

Search Results | IDRC - International Development Research Centre

International Development Research Centre (IDRC) Digital Library (Canada)

Results 1 - 10 of 9580 ... New partnership to support Ebola research teams ... population health research, and/or social science research in th ... Journal articles ... is a highly configurable open source electronic medical record system focused on ...

Outline of fiscal 1970 achievements in research on MHD power generation; 1970 nendo MHD hatsuden kenkyu seika gaiyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1970-07-01

Compiled are the results of studies conducted in fiscal 1970 on MHD (magnetohydrodynamic) power generation. In the operation test and modification of the 1000kW-class MHD power generator, modification is carried out involving the combustion system, seed collecting method, and power generation channel, and reviews through experiments are conducted about the analysis and control of the boundary layer structure. In the operation test of the MHD power generator designed for prolonged operation, a test operation for resistance to heat and seeds continues more than 100 hours using a cold wall type power generation channel constituted of water cooled ceramics, and the ceramics are analyzed for failure and loss. Studies are also conducted involving MHD power generator heat exchangers, seed collecting methods, electrode materials for MHD power generators, heat-resistant materials for MHD power generators, thermal performance rating for MHD power plants, etc. In the research and development of superconductive electromagnets, superconductive electromagnets are developed and tested for 1000kW-class MHD power generators, and studies are conducted on turbine type helium liquefiers, superinsulated superconductive electromagnetic field generators, etc. (NEDO)

Comparing microarrays and next-generation sequencing technologies for microbial ecology research.

Science.gov (United States)

Roh, Seong Woon; Abell, Guy C J; Kim, Kyoung-Ho; Nam, Young-Do; Bae, Jin-Woo

2010-06-01

Recent advances in molecular biology have resulted in the application of DNA microarrays and next-generation sequencing (NGS) technologies to the field of microbial ecology. This review aims to examine the strengths and weaknesses of each of the methodologies, including depth and ease of analysis, throughput and cost-effectiveness. It also intends to highlight the optimal application of each of the individual technologies toward the study of a particular environment and identify potential synergies between the two main technologies, whereby both sample number and coverage can be maximized. We suggest that the efficient use of microarray and NGS technologies will allow researchers to advance the field of microbial ecology, and importantly, improve our understanding of the role of microorganisms in their various environments.

Confidence crisis of results in biomechanics research.

Science.gov (United States)

Knudson, Duane

2017-11-01

Many biomechanics studies have small sample sizes and incorrect statistical analyses, so reporting of inaccurate inferences and inflated magnitude of effects are common in the field. This review examines these issues in biomechanics research and summarises potential solutions from research in other fields to increase the confidence in the experimental effects reported in biomechanics. Authors, reviewers and editors of biomechanics research reports are encouraged to improve sample sizes and the resulting statistical power, improve reporting transparency, improve the rigour of statistical analyses used, and increase the acceptance of replication studies to improve the validity of inferences from data in biomechanics research. The application of sports biomechanics research results would also improve if a larger percentage of unbiased effects and their uncertainty were reported in the literature.

NULIFE - Implementing Strategic Research of LTO and Facing Generation II and III Challenges Through Cooperative Research

International Nuclear Information System (INIS)

Rintamaa, R.; Aho-Mantila, I.; Prunier, V.

2011-01-01

The European network of excellence NULIFE (Nuclear plant life prediction) has been launched under the Euratom Framework Programme with a clear focus on integrating safety-oriented research on materials, structures and systems and exploiting the results of this integration through the production of harmonised lifetime assessment methods. NULIFE will help provide a better common understanding of the factors affecting the lifetime of nuclear power plants which, together with associated management methods, will help facilitate safe and economic long term operation of existing nuclear power plants. In addition, NULIFE will help in the development of design criteria for future generations of nuclear power plant. NULIFE was kicked-off in October 2006 and will work over a 5-year period to create a single organization structure, capable of providing harmonised research and development (R and D) at European level to the nuclear power industry and the related safety authorities. Led by VTT (Technical Research Centre of Finland), the project has a total budget in excess of 8 million euros, with over 40 partners drawn from leading research institutions, technical support organisations, power companies and manufacturers throughout Europe. NULIFE also involves many industrial organizations and, in addition to their R and D contributions, these take part in a dedicated End User Group. The importance of the long term operation of the plants has been recognized at European level, in the strategic research agenda of SNE TP (Sustainable Nuclear Energy Technology Platform). In NULIFE, the joint EU-wide coordinated research strategy for plant life integrity management and long term operation has been defined. Based on NULIFE business plan, the discussion of long-term business plan, operational model and statutes of the future NULIFE institute has been started. NULIFE maintains the sustainability of nuclear power by focusing on the continued, 60+ years of safe operation of nuclear power

Orimulsion{reg_sign} new generation: New commercial tests results

Energy Technology Data Exchange (ETDEWEB)

Marruffo, F.; Sarmiento, W.

2000-07-01

The new generation of Orimulsion{reg_sign} has been tested since September 1998 and was released to the market on January 1999 by PDVSA-Bitor. Main results from plants will be treated in detail within this paper. Boiler performance has been considerably improved by fuel switching. Operation changes could be summarized as follows: (1) Better furnace wall heat absorption; (2) Lower backend temperature; and (3) Lower sootblowing frequency. In Fuel Oil designed units, the new Orimulsion{reg_sign} firing current performance is similar to Fuel Oil, which indicates a similarity in combustion characteristics between these two fuels. This permits the switching to Orimulsion{reg_sign} in these units with only very minor modification. When compared to its predecessor, the new generation of Orimulsion{reg_sign} has proven to be a better product also from the environmental point of view. Due to its completely new designed surfactant package and its new architecture, the following results have consistently been shown: (1) Lower SO{sub 3} emissions; (2) Less CO production; and (3) Lower particulate levels.

FY 1977 Annual report on Sunshine Project results. Survey and research on systems utilizing solar energy (Photovoltaic power generation systems); 1977 nendo taiyo energy riyo system chosa kenkyu seika hokokusho. Taiyoko hatsuden system

Energy Technology Data Exchange (ETDEWEB)

NONE

1978-03-31

This project is aimed at investigation on irradiation conditions of natural solar radiation to establish the performance evaluation methods; establishment of standard evaluation methods under natural solar radiation; and investigation on practical problems involved in the photovoltaic power generation systems. The research items are (1) photovoltaic power generation systems, and (2) standard evaluation methods for photovoltaic power generation systems installed on the ground. The item (1) includes the effect analysis in which existing Japanese residential buildings are selected to estimate possibility of installation of photovoltaic power generation systems and possible quantity of power generated; conceptual designs in which several systems conceivable at present are proposed and outlined, and a 30kW photovoltaic power generation system is taken up to investigate, e.g., solar cell arrays for the system, orthogonal conversion devices, associated facilities, conceptual designs of storage batteries, problems involved therein, and future research themes; and operation of the cell, which takes up operational examples of solar cell power sources, and operational problems viewed from the power transmission side. The item (2) proposes the standard evaluation methods (primary drafts) for the solar cell arrays and panels as those for photovoltaic power generation systems installed on the ground. (NEDO)

Challenges and Difficulties to Teaching Engineering to Generation Z: a case research

OpenAIRE

Barreiro, Suamit Correia; Bozutti, Daniel Fernando

2017-01-01

Many people from generation Z are at the beginning of their academic activities. This generation has peculiar characteristics that might be a challenge in the labor market. Thus, instructors have a great role in their preparation. However, professors might face difficulties dealing with their specific characteristics. The research aims to carry out a general survey to enable an understanding of the greater challenges and difficulties in teaching the subject of engineering to the students of G...

Outline of results of safety research (in nuclear fuel cycle field in fiscal year 1996)

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-01

The safety research in Power Reactor and Nuclear Fuel Development Corporation in fiscal year 1996 has been carried out based on the basic plan of safety research (from fiscal year 1996 to 2000) which was decided in March, 1996. In this report, on nuclear fuel cycle field, namely all the subjects in the fields of nuclear fuel facilities, environmental radioactivity and waste disposal, and the subjects related to nuclear fuel facilities among the fields of aseismatic and probabilistic safety assessments, the results of research in fiscal year 1996, the first year of the 5-year project, are summarized together with the outline of the basic plan of safety research. The basic policy, objective and system for promotion of the safety research are described. The objectives of the safety research are the advancement of safety technology, the safety of facilities, stable operation techniques, the safety design and the evaluation techniques of next generation facilities, and the support of transferring nuclear fuel cycle to private businesses. The objects of the research are uranium enrichment, fuel fabrication and reprocessing, and waste treatment and storage. 52 investigation papers of the results of the safety research in nuclear fuel cycle field in fiscal year 1996 are collected in this report. (K.I.)

Development of disposal technologies for radioactive waste generated from radioisotope users and research institutes

International Nuclear Information System (INIS)

Sakai, Akihiro; Yoshimori, Michiro

2001-01-01

In order to safely dispose of a radioactive waste, which is generated from radioisotope users and research institutes, investigation of characteristics of the waste and conceptual design of disposal facility were carried out. As a result of investigating JAERI that the waste has mainly been stored, it became clear that radioactivities of 19 nuclides are important from the viewpoint of the safety of the disposal. And the result of the conceptual design of disposal facilities on the assumption of 3 kinds of sites, the differences on the safety could not be recognized in either case, though the installation depth to construct the facilities influenced the economical efficiency. (author)

Research on the perception of Skechers brand product design viewed by generation Y

OpenAIRE

Nováková, Michaela

2016-01-01

Title: Research on the perception of Skechers brand product design viewed by generation Y Goals: The main goal of the bachelor thesis is to find how generation Y perceives the sports shoes design of Skechers brand. To determine, which design factors are the most important during the selection of a sports shoes. An integral part of the thesis is to choose the most popular types of sports shoes, in the eyes of generation Y and also to find out how they perceive stoles of those shoes and their t...

Molten salt steam generator subsystem research experiment. Volume I. Phase 1 - Final report

Energy Technology Data Exchange (ETDEWEB)

None

1984-10-01

A study was conducted for Phase 1 of a two-phase project whose objectives were to develop a reliable, cost-effective molten salt steam generating subsystem for solar thermal plants, minimize uncertainty in capital, operating, and maintenance costs, and demonstrate the ability of molten salt to generate high-pressure, high-temperature steam. The Phase 1 study involved the conceptual design of molten salt steam generating subsystems for a nominal 100-MWe net stand-alone solar central receiver electric generating plant, and a nominal 100-MWe net hybrid fossil-fueled electric power generating plant that is 50% repowered by a solar central receiver system. As part of Phase 1, a proposal was prepared for Phase 2, which involves the design, construction, testing and evaluation of a Subsystem Research Experiment of sufficient size to ensure successful operation of the full-size subsystem designed in Phase 1. Evaluation of several concepts resulted in the selection of a four-component (preheater, evaporator, superheater, reheater), natural circulation, vertically oriented, shell and tube (straight) heat exchanger arrangement. Thermal hydraulic analysis of the system included full and part load performance, circulation requirements, stability, and critical heat flux analysis. Flow-induced tube vibration, tube buckling, fatigue evaluation of tubesheet junctions, steady-state tubesheet analysis, and a simplified transient analysis were included in the structural analysis of the system. Operating modes and system dynamic response to load changes were identified. Auxiliary equipment, fabrication, erection, and maintenance requirements were also defined. Installed capital costs and a project schedule were prepared for each design.

Report of fiscal 1998 results. Feasibility study of overseas technological development (feasibility study for joint research on photovoltaic power generation in Myanmar); 1998 nendo kaigai gijutsu kaihatsu kanosei chosa hokokusho. Myanmar ni okeru taiyoko hatsuden system kyodo kenkyu kanosei chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Feasibility was studied of a demonstrative research concerning effective operation of a hybrid system consisting of photovoltaic, wind and diesel power generations in Myanmar. Upon confirmation of Myanmar's request and assistance, Myanmar electric Power Enterprise was selected as the counterpart, with Kantangyi village determined as the candidate site from the viewpoint of the quantity of solar radiation, wind conditions, and convenience in transportation service. Meteorological observation instruments were installed at Nyaung U observatory, with the observation implemented. It was grasped that the demand spreading pattern and the demand for electric power was 40 kWh/month per household. It was also judged that the system structure should be constituted of photovoltaic power, wind power, and diesel generator/battery/adjustable load. The problems are stable supply technology, technology for effective use of renewable energy, technology for complementary effects of photovoltaic power generation and wind power generation, and demonstration of a 100 kW class wind power generation system. Particularly important is consistency between the capacity of power storage equipment and that of diesel power generation. The study results applicable to Japan is the verification of a small-sized independent system for remote islands or the like. The total research expenses were estimated to be 600 million yen. (NEDO)

Vapor generation methods for explosives detection research

Energy Technology Data Exchange (ETDEWEB)

Grate, Jay W.; Ewing, Robert G.; Atkinson, David A.

2012-12-01

The generation of calibrated vapor samples of explosives compounds remains a challenge due to the low vapor pressures of the explosives, adsorption of explosives on container and tubing walls, and the requirement to manage (typically) multiple temperature zones as the vapor is generated, diluted, and delivered. Methods that have been described to generate vapors can be classified as continuous or pulsed flow vapor generators. Vapor sources for continuous flow generators are typically explosives compounds supported on a solid support, or compounds contained in a permeation or diffusion device. Sources are held at elevated isothermal temperatures. Similar sources can be used for pulsed vapor generators; however, pulsed systems may also use injection of solutions onto heated surfaces with generation of both solvent and explosives vapors, transient peaks from a gas chromatograph, or vapors generated by s programmed thermal desorption. This article reviews vapor generator approaches with emphasis on the method of generating the vapors and on practical aspects of vapor dilution and handling. In addition, a gas chromatographic system with two ovens that is configurable with up to four heating ropes is proposed that could serve as a single integrated platform for explosives vapor generation and device testing. Issues related to standards, calibration, and safety are also discussed.

Comparative assessment of agricultural technology generating practices in universities and research institutes in north central zone of Nigeria

Directory of Open Access Journals (Sweden)

Gbolagade Benjamin Adesiji

2017-06-01

Full Text Available To understand the technology generating practices among universities and research institutes in north central zone of Nigeria, this study examined sources of funds for technology generating activities, compared agro-technology generating practices and identified constraining factors hindering technology generating practices. One hundred and fifty-two academic staff were randomly selected from universities and one hundred and thirty-six respondents were drawn from research institutes. Validated questionnaires with reliability coefficient of r = 0.92 were used to elicit data. Data were analyzed using descriptive statistics, Likert-scale, T-test and Factor analysis. Majority (93.4% of universities’ respondents used their personal funds to generate new technology compared to their counterparts in research institutes. The most widely employed mechanism for generating agricultural technologies was joint radio programmes (mean = 3.38 while the least was biotechnology (mean = 2.57. Major areas of differences in technology generation between the two institutions were the physical distance (t = 13.54; P < 0.05, farmers participation in field research trials (t = 8.50; P < 0.05, farmers co-finance of adaptive research trials (t = 3.77; P < 0.05 and adequate research facilities and incentives to workers (t = 2.05; P < 0.05. Factors constraining technology generation for universities were poor access to knowledge and information on new innovation (r = 0.815 while for research institutes it was limited physical resources (ICT, Telephone (r = 0.801. It was recommended therefore that respondents should look into options of writing alternate fund proposals and submitting to a wider range of funding bodies. Governance of innovation could be strengthened through the formation of a formal technological linkage advisory council.

Research on determine the absolute neutron output of distributed pulse generators

International Nuclear Information System (INIS)

Li Bojun; Tang Zhangkui; Wang Dong; Yang Gaozhao; Peng Taiping

2009-01-01

In order to determine the absolute neutron output of distributed pulse generators, we deduced equivalent length to deal with experimental data, according to the different layout and weighting of multiple pulse generators. The deposited energy in scintillation crystal and the integral flux which drilling through crystal interface was simulated by MCNP code. The result shows the simulated proportion of different distributed pulse generators is approximately agreed with experimental data. The validity of the equivalent length model was proved by the consistent results between calculation and experimental data. (authors)

Spanish approach to research and development applied to steam generator tubes structural integrity and life management

International Nuclear Information System (INIS)

Lozano, J.; Bollini, G.J.

1997-01-01

The operating experience acquired from certain Spanish Nuclear Power Plant steam generators shows that the tubes, which constitute the second barrier to release of fission products, are susceptible to mechanical damage and corrosion as a result of a variety of mechanisms, among them wastage, pitting, intergranular attack (IGA), stress-corrosion cracking (SCC), fatigue-induced cracking, fretting, erosion/corrosion, support plate denting, etc. These problems, which are common in many plants throughout the world, have required numerous investments by the plants (water treatment plants, replacement of secondary side materials such as condensers and heaters, etc.), have meant costs (operation, inspection and maintenance) and have led to the unavailability of the affected units. In identifying and implementing all these preventive and corrective measures, the Spanish utilities have moved through three successive stages: in the initial stage, the main source of information and of proposals for solutions was the Plant Vendor, whose participation in this respect was based on his own Research and Development programs; subsequently, the Spanish utilities participated jointly in the EPRI Steam Generator Owners Group, collaborating in financing; finally, the Spanish utilities set up their own Steam Generator Research and Development program, while maintaining relations with EPRI programs and those of other countries through information interchange

Experimental researches on hydrogen generation by aluminum with adding lithium at high temperature

International Nuclear Information System (INIS)

Yang, Weijuan; Zhang, Tianyou; Liu, Jianzhong; Wang, Zhihua; Zhou, Junhu; Cen, Kefa

2015-01-01

In order to recover the released heat of Al–H_2O reaction and promote the reaction itself, the hydrogen production processes of aluminum with lithium addition in molten state are investigated. Experiments are conducted by both a thermogravimetric analyzer and a special experimental facility at high temperature. The results on both apparatuses show that the addition of Li can promote the reactivity of aluminum with water. Compared with pure aluminum, only 5% of Li content can achieve a great improvement: the H_2 yield increases from 8.7% to 53% and the average H_2 generation rate from 15 to 112 mL min"−"1 g"−"1. With the increase of Li content, H_2 yield is improved distinctly and the period with a high H_2 generation rate is prolonged. In the Al–20%Li case, the H_2 yield of 88% is obtained, and it appears a stable period in which the H_2 generation rate keeps high. When adding lithium, LiAlO_2 appears in the products and the products are made of columnar crystals. The pores with an average size of 17–33 nm in the LiAlO_2 products are manyfold bigger than the pores of alumina, which takes an important role in improving the reactivity of aluminum and water. - Highlights: • The Al–H_2O reaction with Li addition in molten state was researched. • Li addition can achieve a great promotion of H_2 yield and H_2 generation rate. • The Al–20%Li case achieved a H_2 yield of 88%. • With Li addition, LiAlO_2 was detected in the reaction products. • XRD and TEM-EDS results indicated the promoting mechanism of Li.

Basic research in support of innovative fuels design for the Generation IV systems (F-BRIDGE project)

International Nuclear Information System (INIS)

Valot, Carole; Bertolus, Marjorie; Konings, Rudy; Somers, Joe; Groot, Sander de

2010-01-01

F-BRIDGE (Basic Research in support of Innovative Fuels Design for the GEN IV systems) is a 4-year project which started in 2008. It seeks to bridge the gap between basic research and technological applications for generation IV nuclear reactor systems. One of the challenges for the next generation of reactors is to significantly increase the efficiency in designing innovative fuels. The object of the F-BRIDGE project is to complement the empirical approach by a physically-based description of fuel and cladding materials to enable a rationalization of the design process and a better selection of promising fuel systems. Advanced modelling and separate effects experiments are carried out in order to obtain more exact physical descriptions of ceramic fuels and cladding, at relevant scales from the atomic to the macroscopic scale. Research is also focused on assessing and improving 'sphere-pac' fuel, a composite-ceramics concept which has shown promise. The project activities can be broken down into four main areas: (i) Basic research investigations using a multi-scale approach in both experimentation and modelling to enable the generation of missing basic data, the identification of relevant mechanisms and the development of appropriate models; (ii) Transfer between technological issues and basic research by bringing together within the same project materials scientists, engineers and end-users; (iii) Assessment of the drawbacks and benefits of the sphere-pac fuel application to various Generation IV systems; (iv) Education and training to promote research in the field of fuel materials, to ensure the exchange of results and ideas among the participants and to link the project with other related European or international initiatives. The project relies on the complementary expertise of 19 partners: nuclear and non nuclear research organisations, universities, a nuclear engineering company, as well as technology and project management consultancy small and medium

Report on preceding surveys and researches in fiscal 1999. Surveys and researches on the next generation cold emission technology; 1999 nendo jisedai cold emission gijutsu no chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The cold emission (CE) technology must be developed as the base technology to realize the next generation flat panel displays, fluorescent display tubes, communication use microwave tubes, electron microscopes, electric power conversion elements, image photographing tubes, and different kinds of sensors. Therefore, this paper describes surveys and researches performed on technological problems and technological seeds in a hyperfine processing technology for cold emitters, and technologies to control, evaluate and simulate solid surface of cold emitters. Different kinds of applied devices that can be realized by using the CE technology are also surveyed and researched. Section 1 summarizes the progress in information communicating technologies and the changes in terminal utilization environment. Section 2 describes the application of a display technology for information terminals and a cold cathode. Section 3 investigates elementary technologies for developing electric field radiation display. Section 4 investigates physics and an evaluation technology for the next generation cold cathode. Section 5 describes the result of the investigations re-commissioned to Tsukuba University for measuring microscopic work function on solid surface by using the scanning probe process. Section 6 proposes a research and development project for the 'next generation CE technology'. (NEDO)

The extent of food waste generation across EU-27: different calculation methods and the reliability of their results.

Science.gov (United States)

Bräutigam, Klaus-Rainer; Jörissen, Juliane; Priefer, Carmen

2014-08-01

The reduction of food waste is seen as an important societal issue with considerable ethical, ecological and economic implications. The European Commission aims at cutting down food waste to one-half by 2020. However, implementing effective prevention measures requires knowledge of the reasons and the scale of food waste generation along the food supply chain. The available data basis for Europe is very heterogeneous and doubts about its reliability are legitimate. This mini-review gives an overview of available data on food waste generation in EU-27 and discusses their reliability against the results of own model calculations. These calculations are based on a methodology developed on behalf of the Food and Agriculture Organization of the United Nations and provide data on food waste generation for each of the EU-27 member states, broken down to the individual stages of the food chain and differentiated by product groups. The analysis shows that the results differ significantly, depending on the data sources chosen and the assumptions made. Further research is much needed in order to improve the data stock, which builds the basis for the monitoring and management of food waste. © The Author(s) 2014.

Magnetohydrodynamic generators in power generation (a bibliography with abstracts). Report for 1964--Jun 1976

International Nuclear Information System (INIS)

Grooms, D.W.

1976-06-01

The results of Government-sponsored research on the use of magnetohydrodynamic generators in electric power production are presented. The report includes research on performance, costs, efficiency, and design of MHD generators and their use in fusion and fission reactors, and fossil fueled plants. (This updated bibliography contains 120 abstracts, 25 of which are new entries to the previous edition.)

Recent Progress in Understanding Natural-Hazards-Generated TEC Perturbations: Measurements and Modeling Results

Science.gov (United States)

Komjathy, A.; Yang, Y. M.; Meng, X.; Verkhoglyadova, O. P.; Mannucci, A. J.; Langley, R. B.

2015-12-01

Natural hazards, including earthquakes, volcanic eruptions, and tsunamis, have been significant threats to humans throughout recorded history. The Global Positioning System satellites have become primary sensors to measure signatures associated with such natural hazards. These signatures typically include GPS-derived seismic deformation measurements, co-seismic vertical displacements, and real-time GPS-derived ocean buoy positioning estimates. Another way to use GPS observables is to compute the ionospheric total electron content (TEC) to measure and monitor post-seismic ionospheric disturbances caused by earthquakes, volcanic eruptions, and tsunamis. Research at the University of New Brunswick (UNB) laid the foundations to model the three-dimensional ionosphere at NASA's Jet Propulsion Laboratory by ingesting ground- and space-based GPS measurements into the state-of-the-art Global Assimilative Ionosphere Modeling (GAIM) software. As an outcome of the UNB and NASA research, new and innovative GPS applications have been invented including the use of ionospheric measurements to detect tiny fluctuations in the GPS signals between the spacecraft and GPS receivers caused by natural hazards occurring on or near the Earth's surface.We will show examples for early detection of natural hazards generated ionospheric signatures using ground-based and space-borne GPS receivers. We will also discuss recent results from the U.S. Real-time Earthquake Analysis for Disaster Mitigation Network (READI) exercises utilizing our algorithms. By studying the propagation properties of ionospheric perturbations generated by natural hazards along with applying sophisticated first-principles physics-based modeling, we are on track to develop new technologies that can potentially save human lives and minimize property damage. It is also expected that ionospheric monitoring of TEC perturbations might become an integral part of existing natural hazards warning systems.

Bubble Generation in a Flowing Liquid Medium and Resulting Two-Phase Flow in Microgravity

Science.gov (United States)

Pais, S. C.; Kamotani, Y.; Bhunia, A.; Ostrach, S.

1999-01-01

The present investigation reports a study of bubble generation under reduced gravity conditions, using both a co-flow and a cross-flow configuration. This study may be used in the conceptual design of a space-based thermal management system. Ensuing two-phase flow void fraction can be accurately monitored using a single nozzle gas injection system within a continuous liquid flow conduit, as utilized in the present investigation. Accurate monitoring of void fraction leads to precise control of heat and mass transfer coefficients related to a thermal management system; hence providing an efficient and highly effective means of removing heat aboard spacecraft or space stations. Our experiments are performed in parabolic flight aboard the modified DC-9 Reduced Gravity Research Aircraft at NASA Lewis Research Center, using an air-water system. For the purpose of bubble dispersion in a flowing liquid, we use both a co-flow and a cross-flow configuration. In the co-flow geometry, air is introduced through a nozzle in the same direction with the liquid flow. On the other hand, in the cross-flow configuration, air is injected perpendicular to the direction of water flow, via a nozzle protruding inside the two-phase flow conduit. Three different flow conduit (pipe) diameters are used, namely, 1.27 cm, 1.9 cm and 2.54 cm. Two different ratios of nozzle to pipe diameter (D(sub N))sup * are considered, namely (D(sub N))sup * = 0.1 and 0.2, while superficial liquid velocities are varied from 8 to 70 cm/s depending on flow conduit diameter. It is experimentally observed that by holding all other flow conditions and geometry constant, generated bubbles decrease in size with increase in superficial liquid velocity. Detached bubble diameter is shown to increase with air injection nozzle diameter. Likewise, generated bubbles grow in size with increasing pipe diameter. Along the same lines, it is shown that bubble frequency of formation increases and hence the time to detachment of a

Ecological research at the offshore windfarm alpha ventus. Challenges, results and perspectives

International Nuclear Information System (INIS)

Beiersdorf, Anika; Wollny-Goerke, Katrin

2014-01-01

At present and over the next few years, large-scale windfarms are being installed far off the coast of Germany in the North and Baltic Sea, making a major contribution to electricity generation from renewable energy sources. One of the German government's aims is to ensure the environmentally sound and sustainable development of offshore wind energy. Germany's first offshore test site, alpha ventus, was therefore accompanied from the construction phase to the first years of operation by an intensive environmental research programme, the StUKplus project, financed by the Federal Ministry for the Environment, Nature Conservation and Nuclear Safety and coordinated by the Federal Maritime and Hydrographic Agency. Marine and ecological aspects have been researched there for more than five years to improve the level of knowledge about the ecological impacts of offshore windfarms. This book provides a broad, richly illustrated overview of applied and new research methods and monitoring techniques. It summarises the key research findings on the impacts on benthic communities, fish, marine mammals and birds, also taking into account underwater sound and sediment measurements. Interpreting the results in the sense of lessons learned, new challenges and perspectives are discussed for future sustainable offshore development in German waters.

Ecological research at the offshore windfarm alpha ventus. Challenges, results and perspectives

Energy Technology Data Exchange (ETDEWEB)

Beiersdorf, Anika; Wollny-Goerke, Katrin (eds.)

2014-07-01

At present and over the next few years, large-scale windfarms are being installed far off the coast of Germany in the North and Baltic Sea, making a major contribution to electricity generation from renewable energy sources. One of the German government's aims is to ensure the environmentally sound and sustainable development of offshore wind energy. Germany's first offshore test site, alpha ventus, was therefore accompanied from the construction phase to the first years of operation by an intensive environmental research programme, the StUKplus project, financed by the Federal Ministry for the Environment, Nature Conservation and Nuclear Safety and coordinated by the Federal Maritime and Hydrographic Agency. Marine and ecological aspects have been researched there for more than five years to improve the level of knowledge about the ecological impacts of offshore windfarms. This book provides a broad, richly illustrated overview of applied and new research methods and monitoring techniques. It summarises the key research findings on the impacts on benthic communities, fish, marine mammals and birds, also taking into account underwater sound and sediment measurements. Interpreting the results in the sense of lessons learned, new challenges and perspectives are discussed for future sustainable offshore development in German waters.

Generating Topographic Map Data from Classification Results

Directory of Open Access Journals (Sweden)

Joachim Höhle

2017-03-01

Full Text Available The use of classification results as topographic map data requires cartographic enhancement and checking of the geometric accuracy. Urban areas are of special interest. The conversion of the classification result into topographic map data of high thematic and geometric quality is subject of this contribution. After reviewing the existing literature on this topic, a methodology is presented. The extraction of point clouds belonging to line segments is solved by the Hough transform. The mathematics for deriving polygons of orthogonal, parallel and general line segments by least squares adjustment is presented. A unique solution for polylines, where the Hough parameters are optimized, is also given. By means of two data sets land cover maps of six classes were produced and then enhanced by the proposed method. The classification used the decision tree method applying a variety of attributes including object heights derived from imagery. The cartographic enhancement is carried out with two different levels of quality. The user’s accuracies for the classes “impervious surface” and “building” were above 85% in the “Level 1” map of Example 1. The geometric accuracy of building corners at the “Level 2” maps is assessed by means of reference data derived from ortho-images. The obtained root mean square errors (RMSE of the generated coordinates (x, y were RMSEx = 1.2 m and RMSEy = 0.7 m (Example 1 and RMSEx = 0.8 m and RMSEy = 1.0 m (Example 2 using 31 and 62 check points, respectively. All processing for Level 1 (raster data could be carried out with a high degree of automation. Level 2 maps (vector data were compiled for the classes “building” and “road and parking lot”. For urban areas with numerous classes and of large size, universal algorithms are necessary to produce vector data fully automatically. The recent progress in sensors and machine learning methods will support the generation of topographic map data of high

Development of a preclinical 211Rn/211At generator system for targeted alpha therapy research with 211At.

Science.gov (United States)

Crawford, Jason R; Yang, Hua; Kunz, Peter; Wilbur, D Scott; Schaffer, Paul; Ruth, Thomas J

2017-05-01

The availability of 211 At for targeted alpha therapy research can be increased by the 211 Rn/ 211 At generator system, whereby 211 At is produced by 211 Rn electron capture decay. This study demonstrated the feasibility of using generator-produced 211 At to label monoclonal antibody (BC8, anti-human CD45) for preclinical use, following isolation from the 207 Po contamination also produced by these generators (by 211 Rn α-decay). 211 Rn was produced by 211 Fr electron capture decay following mass separated ion beam implantation and chemically isolated in liquid alkane hydrocarbon (dodecane). 211 At produced by the resulting 211 Rn source was extracted in strong base (2N NaOH) and purified by granular Te columns. BC8-B10 (antibody conjugated with closo-decaborate(2-)) was labeled with generator-produced 211 At and purified by PD-10 columns. Aqueous solutions extracted from the generator were found to contain 211 At and 207 Po, isolated from 211 Rn. High radionuclidic purity was obtained for 211 At eluted from Te columns, from which BC8-B10 monoclonal antibody was successfully labeled. If not removed, 207 Po was found to significantly contaminate the final 211 At-BC8-B10 product. High yield efficiencies (decay-corrected, n=3) were achieved for 211 At extraction from the generator (86%±7%), Te column purification (70%±10%), and antibody labeling (76%±2%). The experimental 211 Rn/ 211 At generator was shown to be well-suited for preclinical 211 At-based research. We believe that these experiments have furthered the knowledge-base for expanding accessibility to 211 At using the 211 Rn/ 211 At generator system. As established by this work, the 211 Rn/ 211 At generator has the capability of facilitating preclinical evaluations of 211 At-based therapies. Copyright © 2017 Elsevier Inc. All rights reserved.

Results from the UK 3rd generation programme: Albion

Science.gov (United States)

McEwen, R. K.; Axcell, C.; Knowles, P.; Hoade, K. P.; Wilson, M.; Dennis, P. N. J.; Backhouse, P.; Gordon, N. T.

2008-10-01

Following the development of 1st Generation systems in the 1970s, thermal imaging has been in service with the UK armed forces for over 25 years and has proven itself to be a battle winning technology. More recently the wider accessibility to similar technologies within opposing forces has reduced the military advantage provided by these 1st Generation systems and a clear requirement has been identified by the UK MOD for thermal imaging sensors providing increased detection, recognition and identification (DRI) ranges together with a simplified logistical deployment burden and reduced through-life costs. In late 2005, the UK MOD initiated a programme known as "Albion" to develop high performance 3rd Generation single waveband infrared detectors to meet this requirement. At the same time, under a separate programme supporting higher risk technology, a dual waveband infrared detector was also developed. The development phase of the Albion programme has now been completed and prototype detectors are now available and have been integrated into demonstration thermal imaging cameras. The Albion programme has now progressed into the second phase, incorporating both single and dual waveband devices, focussing on low rate initial production (LRIP) and qualification of the devices for military applications. All of the detectors have been fabricated using cadmium mercury telluride material (CMT), grown by metal organic vapour phase epitaxy (MOVPE) on low cost, gallium arsenide (GaAs) substrates and bump bonded to the silicon read out circuit (ROIC). This paper discusses the design features of the 3rd Generation detectors developed in the UK together with the results obtained from the prototype devices both in the laboratory and when integrated into field deployable thermal imaging cameras.

Search Results | IDRC - International Development Research Centre

International Development Research Centre (IDRC) Digital Library (Canada)

Results 1 - 10 of 8518 ... Giving girls and women the power to decide. Addressing Africa's unmet need for family planning by intensifying sexual and reproductive and adolescent health research. Research in Action. Health MATERNAL AND CHILD HEALTH ADOLESCENT HEALTH FAMILY PLANNING ...

The research-based learning development model as a foundation in generating research ideas

Science.gov (United States)

Puspitasari, Poppy; Dika, Johan Wayan; Permanasari, Avita Ayu

2017-09-01

Research Based Learning is learning that requires students to have exploration skills related to their field. By doing so, students are encouraged to create skills in managing the higherorder of abstraction in order to resolve any problems encountered. The study was done to make the schemes and sequences of learning needed by the students in order to help them to explore first ideas for their upcoming thesis. The scheme development resulted in five stages consisting of 1) identifying research journals; 2) track the development of research topics; 3) reviewing research journals; 4) discussing the results of the reviews; and 5) formulating the research topic. Furthermore, the application of 5 the stage receives percentage agreement of students was 85.9%. Therefore, it can be noted that the application of the scheme is definitely a help for students to find research ideas.

Results of LWR snubber aging research

International Nuclear Information System (INIS)

Brown, D.P.; Werry, E.V.; Blahnik, D.E.

1992-05-01

This report describes the aging research results and recommendations for snubbers used in commercial nuclear power plants. Snubbers are safety-related devices used to restrain undesirable dynamic loads at various piping and equipment locations in nuclear power plants (NPPs). Each snubber must accommodate a plant's normal thermal movements and must be capable of restraining the maximum off-normal dynamic loads, such as a seismic event or a transient, postulated for its specific location. The effects of snubber aging and the factors that contribute to the degradation of their safety performance need to be better understood. Thus, Phase II of Nuclear Plant Aging Research was conducted to enhance the understanding of snubber aging and its consequences. Pacific Northwest Laboratory staff and their subcontractors, Lake Engineering and Wyle Laboratories, visited eight sites (encompassing thirteen plants) to conduct interviews with NPP staff and to collect data on snubber aging, testing, and maintenance. The Phase II research methodology, evaluation, results, conclusions, and recommendations are described in the report. Effective methods for service-life monitoring of snubbers are included in the recommendations

Innovation Impact: Breakthrough Research Results (Brochure)

Energy Technology Data Exchange (ETDEWEB)

2013-07-01

The Innovation Impact brochure captures key breakthrough results across NREL's primary areas of renewable energy and energy efficiency research: solar, wind, bioenergy, transportation, buildings, analysis, and manufacturing technologies.

[Crowdsourcing is a new method for generating data for scientific research].

Science.gov (United States)

Bækgaard, Josefine Stokholm; Hallas, Peter

2015-01-05

Crowdsourcing (CS) is a rapidly emerging method in scientific research. In CS, large groups of people generate new data or try to find solutions to specific research questions, mainly by online collaboration. Examples of the current use of CS in medicine include disease surveillance as well as diagnosis of rare conditions. CS techniques are rapid, low cost and geographically independent - traits lacking in traditional types of study design. However, CS as a method has not yet found its place in the evidence rating scale and a standard for conducting and reporting CS studies does not yet exist.

HARVESTING EMSP RESEARCH RESULTS FOR WASTE CLEANUP

International Nuclear Information System (INIS)

Guillen, Donna Post; Nielson, R. Bruce; Phillips, Ann Marie; Lebow, Scott

2003-01-01

The extent of environmental contamination created by the nuclear weapons legacy combined with expensive, ineffective waste cleanup strategies at many U.S. Department of Energy (DOE) sites prompted Congress to pass the FY96 Energy and Water Development Appropriations Act, which directed the DOE to: ''provide sufficient attention and resources to longer-term basic science research, which needs to be done to ultimately reduce cleanup costs'', ''develop a program that takes advantage of laboratory and university expertise, and'' ''seek new and innovative cleanup methods to replace current conventional approaches which are often costly and ineffective.'' In response, the DOE initiated the Environmental Management Science Program (EMSP)-a targeted, long-term research program intended to produce solutions to DOE's most pressing environmental problems. EMSP funds basic research to lower cleanup cost and reduce risk to workers, the public, and the environment; direct the nation's scientific infrastructure towards cleanup of contaminated waste sites; and bridge the gap between fundamental research and technology development activities. EMSP research projects are competitively awarded based on the project's scientific, merit coupled with relevance to addressing DOE site needs. This paper describes selected EMSP research projects with long, mid, and short-term deployment potential and discusses the impacts, focus, and results of the research. Results of EMSP research are intended to accelerate cleanup schedules, reduce cost or risk for current baselines, provide alternatives for contingency planning, or provide solutions to problems where no solutions exist

Organizational Justice Perception According to Generations

Directory of Open Access Journals (Sweden)

Zeki YÜKSEKBİLGİLİ

2015-12-01

Full Text Available Although there are many different researches on the subject of organizational justice, there is no research on organizational justice perception according to generations. In this study, the research subject is defined if there is a difference on the perception of organizational justice between x and y generations. After a conduct of 430 surveys the Organizational Justice Scale is used. As a result, it is proved that there is no significant difference between the organizational justice perceptions according to generations

A strategy for the generation, characterization and distribution of animal models by The Michael J. Fox Foundation for Parkinson’s Research

Directory of Open Access Journals (Sweden)

Marco A. S. Baptista

2013-11-01

Full Text Available Progress in Parkinson’s disease (PD research and therapeutic development is hindered by many challenges, including a need for robust preclinical animal models. Limited availability of these tools is due to technical hurdles, patent issues, licensing restrictions and the high costs associated with generating and distributing these animal models. Furthermore, the lack of standardization of phenotypic characterization and use of varying methodologies has made it difficult to compare outcome measures across laboratories. In response, The Michael J. Fox Foundation for Parkinson’s Research (MJFF is directly sponsoring the generation, characterization and distribution of preclinical rodent models, enabling increased access to these crucial tools in order to accelerate PD research. To date, MJFF has initiated and funded the generation of 30 different models, which include transgenic or knockout models of PD-relevant genes such as Park1 (also known as Park4 and SNCA, Park8 (LRRK2, Park7 (DJ-1, Park6 (PINK1, Park2 (Parkin, VPS35, EiF4G1 and GBA. The phenotypic characterization of these animals is performed in a uniform and streamlined manner at independent contract research organizations. Finally, MJFF created a central repository at The Jackson Laboratory (JAX that houses both non-MJFF and MJFF-generated preclinical animal models. Funding from MJFF, which subsidizes the costs involved in transfer, rederivation and colony expansion, has directly resulted in over 2500 rodents being distributed to the PD community for research use.

"Action": Publishing Research Results in Film

Directory of Open Access Journals (Sweden)

Susan Thieme

2012-01-01

Full Text Available Researchers commonly disseminate their research findings in academic papers or books that have a selected and limited target audience. A potential method for disseminating the information other than the traditional academic is through film, but this means tailoring the material to this medium and in many cases collaborating with people who have the necessary skills. The aim of this article is to reflect on the experience of making a film from the researcher's perspective. I will in particular shed light on how the filmmaking team worked together and provide examples of the preceding research, as well as the shooting and editing of the film material. The long period of research leading up to the film was a major factor in its success. In addition, all of the people involved have to be willing to share their experiences, recognize each other's expertise and be able to compromise. The film was much more than just an extension of the ongoing multi-site qualitative research. The shooting not only provided new insights into people's lives but also forced me to think much harder about my research and "the fieldwork." The additional costs and efforts related to the film can be justified by a transdisciplinary understanding of research that requires the results to be disseminated beyond academic circles, attract attention from policymakers and activists, and also allow the subjects of the research (who generally do not read English academic articles to become an active audience. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1201316

Spanish generation market: structure, design and results

International Nuclear Information System (INIS)

Agosti, L.; Padilla, A. J.; Requejo, A.

2007-01-01

This paper provides an overview of the structure, design and outcome of the Spanish generation market from 1998, when the market was liberalised, to date. More precisely, this paper reviews the history of the liberalisation process; describes the structure of the generation market and its evolution over time; analyses the existence of market power; and evaluates the outcome of the liberalisation process from the viewpoint of its impact on al locative efficiency, productive efficiency and dynamic efficiency. The paper concludes with a brief summary of recent regulatory reforms. (Author)

DO ACCOUNTING PRACTITIONERS USE ACCOUNTING RESEARCH RESULTS?

OpenAIRE

ALINA BEATTRICE VLADU

2015-01-01

This paper reports the results of a survey designed to explore if accounting practitioners are using as a reference point in their daily activities the opinions of academia. Since accounting research comprises various trends of research the earnings management research field is used as illustrative case. Among our respondents were accounting professional, members of professional bodies as the Chamber of Financial Auditors or Romania and also Body of Expert and Licensed Accountants...

International Space Station Science Research Accomplishments During the Assembly Years: An Analysis of Results from 2000-2008

Science.gov (United States)

Evans, Cynthia A.; Robinson, Julie A.; Tate-Brown, Judy; Thumm, Tracy; Crespo-Richey, Jessica; Baumann, David; Rhatigan, Jennifer

2009-01-01

This report summarizes research accomplishments on the International Space Station (ISS) through the first 15 Expeditions. When research programs for early Expeditions were established, five administrative organizations were executing research on ISS: bioastronautics research, fundamental space biology, physical science, space product development, and space flight. The Vision for Space Exploration led to changes in NASA's administrative structures, so we have grouped experiments topically by scientific themes human research for exploration, physical and biological sciences, technology development, observing the Earth, and educating and inspiring the next generation even when these do not correspond to the administrative structure at the time at which they were completed. The research organizations at the time at which the experiments flew are preserved in the appendix of this document. These investigations on the ISS have laid the groundwork for research planning for Expeditions to come. Humans performing scientific investigations on ISS serve as a model for the goals of future Exploration missions. The success of a wide variety of investigations is an important hallmark of early research on ISS. Of the investigations summarized here, some are completed with results released, some are completed with preliminary results, and some remain ongoing.

HARVESTING EMSP RESEARCH RESULTS FOR WASTE CLEANUP

Energy Technology Data Exchange (ETDEWEB)

Guillen, Donna Post; Nielson, R. Bruce; Phillips, Ann Marie; Lebow, Scott

2003-02-27

The extent of environmental contamination created by the nuclear weapons legacy combined with expensive, ineffective waste cleanup strategies at many U.S. Department of Energy (DOE) sites prompted Congress to pass the FY96 Energy and Water Development Appropriations Act, which directed the DOE to: ''provide sufficient attention and resources to longer-term basic science research, which needs to be done to ultimately reduce cleanup costs'', ''develop a program that takes advantage of laboratory and university expertise, and'' ''seek new and innovative cleanup methods to replace current conventional approaches which are often costly and ineffective.'' In response, the DOE initiated the Environmental Management Science Program (EMSP)-a targeted, long-term research program intended to produce solutions to DOE's most pressing environmental problems. EMSP funds basic research to lower cleanup cost and reduce risk to workers, the public, and the environment; direct the nation's scientific infrastructure towards cleanup of contaminated waste sites; and bridge the gap between fundamental research and technology development activities. EMSP research projects are competitively awarded based on the project's scientific, merit coupled with relevance to addressing DOE site needs. This paper describes selected EMSP research projects with long, mid, and short-term deployment potential and discusses the impacts, focus, and results of the research. Results of EMSP research are intended to accelerate cleanup schedules, reduce cost or risk for current baselines, provide alternatives for contingency planning, or provide solutions to problems where no solutions exist.

Fiscal 2000 report on result of international joint demonstrative development of photovoltaic power generation system. Demonstrative research on photovoltaic power generation system interconnection system (Myanmar); 2000 nendo taiyoko hatsuden system kokusai kyodo jissho kaihatsu seika hokokusho. Taiyoko hatsuden keito renkei system jissho kenkyu (Myanmar)

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

Joint research was conducted with Myanmar on a photovoltaic power generation system interconnection system, for which fiscal 2000 results were described in this paper. Power generating facilities were set up consisting of 80kW photovoltaic, 40kW wind and 60kW diesel systems. With the photovoltaic and wind power generation connected to a small-scale power system as a ballast load, the system interconnection is formed through load adjusting equipment such as storage batteries. The hybrid system feeding is from 6 o'clock early in the morning until 23 late at night. The diesel power generation is free from restrictions. The operating method was set on system control (demand side management) by adjustment from the load side, with ballast load control employed that adjustably operates an ice machine load. The basic design was drafted in terms of a storage battery capacity of 1,000Ah and an ice machine load of 32kW. The daytime load was assumed to be 25% of the night load. On the equipment specifications set in this basic design, arrangement design was conducted for the equipment in the premises, making a land development plan and a basic construction plan including a temporary work site, construction steps, transportation and delivery of the equipment. Quantity of solar radiation and wind data were continuously observed. (NEDO)

Research on generating various polarization-modes in polarized illumination system

Science.gov (United States)

Huang, Jinping; Lin, Wumei; Fan, Zhenjie

2013-08-01

With the increase of the numerical aperture (NA), the polarization of light affects the imaging quality of projection lens more significantly. On the contrary, according to the mask pattern, the resolution of projection lens can be improved by using the polarized illumination. That is to say, using the corresponding polarized beam (or polarization-mode) along with the off-axis illumination will improve the resolution and the imaging quality of the of projection lens. Therefore, the research on the generation of various polarization modes and its conversion methods become more and more important. In order to realize various polarization modes in polarized illumination system, after read a lot of references, we provide a way that fitting for the illumination system with the wavelength of 193nm.Six polarization-modes and a depolarized mode are probably considered. Wave-plate stack is used to generate linearly polarization-mode, which have a higher degree polarization. In order to generate X-Y and Y-X polarization mode, the equipment consisting of four sectors of λ/2 wave plate was used. We combined 16 sectors of λ/2 wave plate which have different orientations of the "slow" axis to generate radial and azimuthal polarization. Finally, a multi-polarization control device was designed. Using the kind of multi-polarization control device which applying this method could help to choose the polarization modes conveniently and flexibility for the illumination system.

Operation results of 3-rd generation nuclear fuel WWER-440 in initial period

International Nuclear Information System (INIS)

Adeev, V.; Panov, A.

2011-01-01

On unit 4 of Kola NPP trial operation of 3-rd generation's fuel began in 2010. Fuel assemblies of 3-rd generation (FA-3) have a number of design features that provide better operational characteristics. Concise description of a design and the basic advantages of fuel of 3-rd generation are described in articles. Increasing of efficiency of nuclear fuel usage will be achieved by reduction of the parasitic capture of thermal neutrons in constructional materials (weight of zirconium is reduced), optimization of uranium-water relation (increase in fuel elements step), increasing of uranium loading (usage of fuel pellets with increased diameter and without central hole in them). By results of trial operation mass transition to use of given type of assemblies in WWER-440 is possible. This report presents the basic outcomes of the trial operation, a brief survey of the obtained data. The basic characteristics of the reactor core with fuel of 3-rd generation are resulted in work. (authors)

Overview of Researches on Social Capital, Human Capital and Social Integration of New Generation Migrant Workers

OpenAIRE

Luan, Wenjing; Lu, Honghong; Tong, Yulin; Lu, Danna

2013-01-01

With urbanization and socio-economic development, new generation migrant workers play an increasingly important role in urban construction. However, for a long time, their social integration situation in inflow places is not ideal. Academic circle has done a lot of researches, but no effective strategy is so far put forward. Through analysis of domestic and foreign researches, it is found that social capital and human capital have an important influence on social integration of new generation...

TID Test Results for 4th Generation iPad(TradeMark)

Science.gov (United States)

Guertin, S. M.; Allen, G. R.; McClure, S. S.; LaBel, K. A.

2013-01-01

TID testing of 4th generation iPads is reported. Of iPad subsystems, results indicate that the charging circuitry and display drivers fail at lowest TID levels. Details of construction are investigated for additional testing of components.

Importance of intellectual property generated by biomedical research at universities and academic hospitals.

Science.gov (United States)

Heus, Joris J; de Pauw, Elmar S; Leloux, Mirjam; Morpurgo, Margherita; Hamblin, Michael R; Heger, Michal

2017-01-01

Biomedical research has many different facets. Researchers and clinicians study disease biology and biochemistry to discover novel therapeutic targets, unravel biochemical pathways and identify biomarkers to improve diagnosis, or devise new approaches to clinically manage diseases more effectively. In all instances, the overall goal of biomedical research is to ensure that results thereof (such as a therapy, a device, or a method which may be broadly referred to as "inventions") are clinically implemented. Most of the researchers' efforts are centered on the advance of technical and scientific aspects of an invention. The development and implementation of an invention can be arduous and very costly. Historically, it has proven to be crucial to protect intellectual property rights (IPR) to an invention (i.e., a patent) to ensure that companies can obtain a fair return on their investment that is needed to develop an academic invention into a product for the benefit of patients. However, the importance of IPR is not generally acknowledged among researchers at academic institutions active in biomedical research. Therefore this paper aims to (1) raise IP awareness amongst clinical and translational researchers; (2) provide a concise overview of what the patenting trajectory entails; and (3) highlight the importance of patenting for research and the researcher. Adequate patent protection of inventions generated through biomedical research at academic institutions increases the probability that patients will benefit from these inventions, and indirectly enables the financing of clinical studies, mainly by opening up funding opportunities (e.g. specific grants aimed at start-ups, pre-seed and seed capital) that otherwise would not be accessible. As a consequence, patented inventions are more likely to become clinically tested and reach the market, providing patients with more treatment options.

New generation of space capabilities resulting from US/RF cooperative efforts

Science.gov (United States)

Humpherys, Thomas; Misnik, Victor; Sinelshchikov, Valery; Stair, A. T., Jr.; Khatulev, Valery; Carpenter, Jack; Watson, John; Chvanov, Dmitry; Privalsky, Victor

2006-09-01

Previous successful international cooperative efforts offer a wealth of experience in dealing with highly sensitive issues, but cooperative remote sensing for monitoring and understanding the global environmental is in the national interest of all countries. Cooperation between international partners is paramount, particularly with the Russian Federation, due to its technological maturity and strategic political and geographical position in the world. Based on experience gained over a decade of collaborative space research efforts, continued cooperation provides an achievable goal as well as understanding the fabric of our coexistence. Past cooperative space research efforts demonstrate the ability of the US and Russian Federation to develop a framework for cooperation, working together on a complex, state-of-the-art joint satellite program. These efforts consisted of teams of scientists and engineers who overcame numerous cultural, linguistic, engineering approaches and different political environments. Among these major achievements are: (1) field measurement activities with US satellites MSTI and MSX and the Russian RESURS-1 satellite, as well as the joint experimental use of the US FISTA aircraft; (2) successful joint Science, Conceptual and Preliminary Design Reviews; (3) joint publications of scientific research technical papers, (4) Russian investment in development, demonstration and operation of the Monitor-E spacecraft (Yacht satellite bus), (5) successful demonstration of the conversion of the SS-19 into a satellite launch system, and (6) negotiation of contractual and technical assistant agreements. This paper discusses a new generation of science and space capabilities available to the Remote Sensing community. Specific topics include: joint requirements definition process and work allocation for hardware and responsibility for software development; the function, description and status of Russian contributions in providing space component prototypes

Next-generation registries: fusion of data for care, and research.

Science.gov (United States)

Mandl, Kenneth D; Edge, Stephen; Malone, Chad; Marsolo, Keith; Natter, Marc D

2013-01-01

Disease-based registries are a critical tool for electronic data capture of high-quality, gold standard data for clinical research as well as for population management in clinical care. Yet, a legacy of significant operational costs, resource requirements, and poor data liquidity have limited their use. Research registries have engendered more than $3 Billion in HHS investment over the past 17 years. Health delivery systems and Accountable Care Organizations are investing heavily in registries to track care quality and follow-up of patient panels. Despite the investment, regulatory and financial models have often enforced a "single purpose" limitation on each registry, restricting the use of data to a pre-defined set of protocols. The need for cost effective, multi-sourced, and widely shareable registry data sets has never been greater, and requires next-generation platforms to robustly support multi-center studies, comparative effectiveness research, post-marketing surveillance and disease management. This panel explores diverse registry efforts, both academic and commercial, that have been implemented in leading-edge clinical, research, and hybrid use cases. Panelists present their experience in these areas as well as lessons learned, challenges addressed, and near innovations and advances.

Proceedings of the Seminar on Research Result of Research Reactor Technology Centre 2003

International Nuclear Information System (INIS)

Endiah Puji Hastuti; Setiyanto; Taswanda Taryo; Mohammad Dhandhang Purwadi; Pinem, Surian; Tarigan, Alim; Hasibuan, Djaruddin; Kadarusmanto; Amir Hamzah

2004-05-01

The Proceeding of the Seminar on Research Result of Research Reactor Technology Centre 2003 held by P2TRR has been reported researcher are expected to use the reports as references to research activities in Science and Technology, especially in field of Nuclear Reactor. There are 27 papers which have separated index. (PPIN)

Test results and commercialization plans for long life Stirling generators

International Nuclear Information System (INIS)

Erbeznik, R.M.; White, M.A.

1996-01-01

Many optimistic predictions regarding commercialization of Stirling engines have been announced over the years, but to date no real successes have emerged. STC is excited to announce the availability of beta prototypes for its RemoteGen trademark family of free-piston Stirling generators. STC is working with suppliers, manufacturers, and beta customers to commercialize the RemoteGen family of generators. STC is proving that these machines overcome previously inhibiting barriers by providing long life, high reliability, cost effective mass production, and market relevance. Stirling power generators are generally acknowledged to offer much higher conversion efficiencies than direct energy conversion systems. Life and reliability, on the other hand, are generally considered superior for direct conversion systems, as established by the exceptional endurance records (though with degradation) for thermoelectric (TE) and photovoltaic (PV) systems. STC's unique approaches combine dynamic system efficiency with static system reliability. The RemoteGen family presently includes a 10-watt RG-10, a 350-watt RG-350, and with 1-kW and 3-kW sizes planned for the future. They all use the same basic configuration with flexure bearings, clearance seals, and moving iron linear alternators. The third generation RG-10 has entered limited production with a radioisotope-fueled version, and a niche market for a propane-fueled version has been identified. Market analysis has led STC to focus on early commercial production of the RG-350. The linear alternator power module portion of the RG-350 is also used in its sister BeCool trademark family of coolers as the linear motor. By using a common power module, both programs will benefit by each other's commercialization efforts. The technology behind the RemoteGen generators, test results, and plans for commercialization are described in this paper

Results of Analyses of the Next Generation Solvent for Parsons

International Nuclear Information System (INIS)

Peters, T.; Washington, A.; Fink, S.

2012-01-01

Savannah River National Laboratory (SRNL) prepared a nominal 150 gallon batch of Next Generation Solvent (NGS) for Parsons. This material was then analyzed and tested for cesium mass transfer efficiency. The bulk of the results indicate that the solvent is qualified as acceptable for use in the upcoming pilot-scale testing at Parsons Technology Center. This report describes the analysis and testing of a batch of Next Generation Solvent (NGS) prepared in support of pilot-scale testing in the Parsons Technology Center. A total of ∼150 gallons of NGS solvent was prepared in late November of 2011. Details for the work are contained in a controlled laboratory notebook. Analysis of the Parsons NGS solvent indicates that the material is acceptable for use. SRNL is continuing to improve the analytical method for the guanidine.

The applied research program of the High Flux Neutron Generator at the National Nuclear Center, Havana

International Nuclear Information System (INIS)

Perez, G.; Martin, G.; Ceballos, C.; Padron, I.; Shtejer, K.; Perez, N.; Guibert, R.; Ledo, L.M.; Cruz Inclan, Carlos

2001-01-01

The Havana High Flux Neutron Generator facility is an intense neutron source based on a 20 mA duoplasmatron ion source and a 250 kV high voltage power supply. It has been installed in the Neutron Generator Laboratory at the Center of Applied Technologies and Nuclear Research in 1997. This paper deal outlined the future applied program to be carried out in this facility in the next years. The Applied Research Program consists on install two nuclear analytic techniques: the PELAN technique which uses the neutron generator in the pulse mode and the Low Energy PIXE technique which uses the same facility as a low energy proton accelerator for PIXE analysis. (author)

Steam-Generator Integrity Program/Steam-Generator Group Project

International Nuclear Information System (INIS)

1982-10-01

The Steam Generator Integrity Program (SGIP) is a comprehensive effort addressing issues of nondestructive test (NDT) reliability, inservice inspection (ISI) requirements, and tube plugging criteria for PWR steam generators. In addition, the program has interactive research tasks relating primary side decontamination, secondary side cleaning, and proposed repair techniques to nondestructive inspectability and primary system integrity. The program has acquired a service degraded PWR steam generator for research purposes. This past year a research facility, the Steam Generator Examination Facility (SGEF), specifically designed for nondestructive and destructive examination tasks of the SGIP was completed. The Surry generator previously transported to the Hanford Reservation was then inserted into the SGEF. Nondestructive characterization of the generator from both primary and secondary sides has been initiated. Decontamination of the channelhead cold leg side was conducted. Radioactive field maps were established in the steam generator, at the generator surface and in the SGEF

Now You See It… Now You Don’t: Understanding Airborne Mapping LiDAR Collection and Data Product Generation for Archaeological Research in Mesoamerica

Directory of Open Access Journals (Sweden)

Juan Carlos Fernandez-Diaz

2014-10-01

Full Text Available In this paper we provide a description of airborne mapping LiDAR, also known as airborne laser scanning (ALS, technology and its workflow from mission planning to final data product generation, with a specific emphasis on archaeological research. ALS observations are highly customizable, and can be tailored to meet specific research needs. Thus it is important for an archaeologist to fully understand the options available during planning, collection and data product generation before commissioning an ALS survey, to ensure the intended research questions can be answered with the resultant data products. Also this knowledge is of great use for the researcher trying to understand the quality and limitations of existing datasets collected for other purposes. Throughout the paper we use examples from archeological ALS projects to illustrate the key concepts of importance for the archaeology researcher.

40 CFR 761.64 - Disposal of wastes generated as a result of research and development activities authorized under...

Science.gov (United States)

2010-07-01

... includes: sample preparation, sample extraction, extract cleanup, extract concentration, addition of PCB.... 761.64 Section 761.64 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) TOXIC... generated during the chemical analysis of samples containing PCBs under part 761, including §§ 761.30, 761...

Generation Y Online Buying Patterns

Directory of Open Access Journals (Sweden)

Katija Vojvodić

2015-12-01

Full Text Available The advantages of electronic retailing can, among other things, result in uncontrolled buying by online consumers, i.e. in extreme buying behavior. The main purpose of this paper is to analyze and determine the buying patterns of Generation Y online consumers in order to explore the existence of different types of behavior based on the characteristics of online buying. The paper also aims at exploring the relationship between extracted factors and Generation Y consumers’ buying intentions. Empirical research was conducted on a sample of 515 consumers in the Dubrovnik-Neretva County. Based on the factor analysis, research results indicate that Generation Y online consumers are influenced by three factors: compulsivity, impulsivity, and functionality. The analysis of variance reveals that significant differences exist between the extracted factors and Generation Y’s online buying characteristics. In addition, correlation analysis shows a statistically significant correlation between the extracted factors and Generation Y’s buying intentions.

Selected results of the slovak coal research

Directory of Open Access Journals (Sweden)

Hredzák Slavomír

1997-09-01

Full Text Available The contribution gives the review of Slovak brown coal research in the last 10 years. The state and development trends of the coal research in Slovakia from the point of view of the clean coal technologies application are described. Some selected results which have been obtained at the Institute of Geotechnics of the Slovak Academy of Sciences are also introduced.

28 CFR 512.20 - Publication of results of research project.

Science.gov (United States)

2010-07-01

... project. 512.20 Section 512.20 Judicial Administration BUREAU OF PRISONS, DEPARTMENT OF JUSTICE GENERAL MANAGEMENT AND ADMINISTRATION RESEARCH Research § 512.20 Publication of results of research project. (a) A researcher may publish in book form and professional journals the results of any research project conducted...

Recycling Flight Hardware Components and Systems to Reduce Next Generation Research Costs

Science.gov (United States)

Turner, Wlat

2011-01-01

With the recent 'new direction' put forth by President Obama identifying NASA's new focus in research rather than continuing on a path to return to the Moon and Mars, the focus of work at Kennedy Space Center (KSC) may be changing dramatically. Research opportunities within the micro-gravity community potentially stands at the threshold of resurgence when the new direction of the agency takes hold for the next generation of experimenters. This presentation defines a strategy for recycling flight experiment components or part numbers, in order to reduce research project costs, not just in component selection and fabrication, but in expediting qualification of hardware for flight. A key component of the strategy is effective communication of relevant flight hardware information and available flight hardware components to researchers, with the goal of 'short circuiting' the design process for flight experiments

Core map generation for the ITU TRIGA Mark II research reactor using Genetic Algorithm coupled with Monte Carlo method

Energy Technology Data Exchange (ETDEWEB)

Türkmen, Mehmet, E-mail: tm@hacettepe.edu.tr [Nuclear Engineering Department, Hacettepe University, Beytepe Campus, Ankara (Turkey); Çolak, Üner [Energy Institute, Istanbul Technical University, Ayazağa Campus, Maslak, Istanbul (Turkey); Ergün, Şule [Nuclear Engineering Department, Hacettepe University, Beytepe Campus, Ankara (Turkey)

2015-12-15

Highlights: • Optimum core maps were generated for the ITU TRIGA Mark II Research Reactor. • Calculations were performed using a Monte Carlo based reactor physics code, MCNP. • Single-Objective and Multi-Objective Genetic Algorithms were used for the optimization. • k{sub eff} and ppf{sub max} were considered as the optimization objectives. • The generated core maps were compared with the fresh core map. - Abstract: The main purpose of this study is to present the results of Core Map (CM) generation calculations for the İstanbul Technical University TRIGA Mark II Research Reactor by using Genetic Algorithms (GA) coupled with a Monte Carlo (MC) based-particle transport code. Optimization problems under consideration are: (i) maximization of the core excess reactivity (ρ{sub ex}) using Single-Objective GA when the burned fuel elements with no fresh fuel elements are used, (ii) maximization of the ρ{sub ex} and minimization of maximum power peaking factor (ppf{sub max}) using Multi-Objective GA when the burned fuels with fresh fuels are used. The results were obtained when all the control rods are fully withdrawn. ρ{sub ex} and ppf{sub max} values of the produced best CMs were provided. Core-averaged neutron spectrum, and variation of neutron fluxes with respect to radial distance were presented for the best CMs. The results show that it is possible to find an optimum CM with an excess reactivity of 1.17 when the burned fuels are used. In the case of a mix of burned fuels and fresh fuels, the best pattern has an excess reactivity of 1.19 with a maximum peaking factor of 1.4843. In addition, when compared with the fresh CM, the thermal fluxes of the generated CMs decrease by about 2% while change in the fast fluxes is about 1%.Classification: J. Core physics.

Restraints on Dissemination of Research Results.

Science.gov (United States)

Taylor, Dalmas A.

1982-01-01

The issue of constraints on the publication of research results is discussed from the perspective of clashing values: free speech versus censorship in protection of national defense. The problems of secrecy as well as of disclosure are examined. Greater conflict between academe and military interests is foreseen. (MSE)

ScholarLens: extracting competences from research publications for the automatic generation of semantic user profiles

Directory of Open Access Journals (Sweden)

Bahar Sateli

2017-07-01

Full Text Available Motivation Scientists increasingly rely on intelligent information systems to help them in their daily tasks, in particular for managing research objects, like publications or datasets. The relatively young research field of Semantic Publishing has been addressing the question how scientific applications can be improved through semantically rich representations of research objects, in order to facilitate their discovery and re-use. To complement the efforts in this area, we propose an automatic workflow to construct semantic user profiles of scholars, so that scholarly applications, like digital libraries or data repositories, can better understand their users’ interests, tasks, and competences, by incorporating these user profiles in their design. To make the user profiles sharable across applications, we propose to build them based on standard semantic web technologies, in particular the Resource Description Framework (RDF for representing user profiles and Linked Open Data (LOD sources for representing competence topics. To avoid the cold start problem, we suggest to automatically populate these profiles by analyzing the publications (co-authored by users, which we hypothesize reflect their research competences. Results We developed a novel approach, ScholarLens, which can automatically generate semantic user profiles for authors of scholarly literature. For modeling the competences of scholarly users and groups, we surveyed a number of existing linked open data vocabularies. In accordance with the LOD best practices, we propose an RDF Schema (RDFS based model for competence records that reuses existing vocabularies where appropriate. To automate the creation of semantic user profiles, we developed a complete, automated workflow that can generate semantic user profiles by analyzing full-text research articles through various natural language processing (NLP techniques. In our method, we start by processing a set of research articles for a

Translational Environmental Research: Improving the Usefulness and Usability of Research Results

Science.gov (United States)

Garfin, G.

2008-12-01

In recent years, requests for proposals more frequently emphasize outreach to stakeholder communities, decision support, and science that serves societal needs. Reports from the National Academy of Sciences and Western States Water Council emphasize the need for science translation and outreach, in order to address societal concerns with climate extremes, such as drought, the use of climate predictions, and the growing challenges of climate change. In the 1990s, the NOAA Climate Program Office developed its Regional Integrated Sciences and Asssessments program to help bridge the gap between climate science (notably, seasonal predictions) and society, to improve the flow of information to stakeholders, and to increase the relevance of climate science to inform decisions. During the same time period, the National Science Foundation initiated multi-year Science and Technology Centers and Decision Making Under Uncertainty Centers, with similar goals, but different metrics of success. Moreover, the combination of population growth, climate change, and environmental degradation has prompted numerous research initiatives on linking knowledge and action for sustainable development. This presentation reviews various models and methodologies for translating science results from field, lab, or modeling work to use by society. Lessons and approaches from cooperative extension, boundary organizations, co-production of science and policy, and medical translational research are examined. In particular, multi-step translation as practiced within the health care community is examined. For example, so- called "T1" (translation 1) research moves insights from basic science to clinical research; T2 research evaluates the effectiveness of clinical practice, who benefits from promising care regimens, and develops tools for clinicians, patients, and policy makers. T3 activities test the implementation, delivery, and spread of research results and clinical practices in order to foster

Chaotic Music Generation System Using Music Conductor Gesture

OpenAIRE

Chen, Shuai; Maeda, Yoichiro; Takahashi, Yasutake

2013-01-01

In the research of interactive music generation, we propose a music generation method, that the computer generates the music, under the recognition of human music conductor's gestures.In this research, the generated music is tuned by the recognized gestures for the parameters of the network of chaotic elements in real time. The music conductor's hand motions are detected by Microsoft Kinect in this system. Music theories are embedded in the algorithm, as a result, the generated music will be ...

An Exploration of Mate Similarity for Criminal Offending Behaviors: Results from a Multi-Generation Sample of Dutch Spouses.

Science.gov (United States)

van de Weijer, Steve G A; Beaver, Kevin M

2017-09-01

There has been a growing body of research examining mate and spousal similarity on antisocial behaviors. The results of these studies have shown varying degrees of similarity between mates and spouses, but the precise mechanisms accounting for such similarity have remained somewhat elusive. The current study builds off this line of research and examines spousal similarity on criminal offending behaviors. Moreover, we also examine the potential factors that might account for spousal similarity. This study analyzed data drawn from two generations of Dutch spouses. The analyses revealed statistically significant associations between mates on criminal offending prior to marriage, a finding that is directly in line with an assortative mating explanation of spousal similarity. In addition, the analyses also revealed that criminal offending between spouses becomes even more similar after marriage, a finding that is line with a behavioral contagion explanation of spousal similarity. We conclude by discussing the limitations of the study along with the implications that these findings have for criminological research.

Comprehensive assessment of hazard and risk generated by different fuel cycles of electric energy production - results of completed and ongoing EU programmes

International Nuclear Information System (INIS)

Borysiewicz, M.; Garanty, I.; Kozubal, A.

2007-01-01

A number of international organizations and research institutions attempted to develop recommended approaches to holistic assessment of hazards and risk generated by fuel cycles of electrical energy production from fuel mining, transportation, plant construction and operation, wastes generation to installation decommissioning. It includes an interagency project coordinated by IAEA and series of projects completed in the EU programme: ExternE and a new project: NEEDS extending the methodology of ExternE for more comprehensive treatment various factors impacting health, environment, economy and energy security. The paper is a brief overview methods used in these projects and the results obtained. (author)

Communication of Biobanks' Research Results : What Do (Potential) Participants Want?

NARCIS (Netherlands)

Meulenkamp, Tineke M.; Gevers, Sjef K.; Bovenberg, Jasper A.; Koppelman, Gerard H.; Vlieg, Astrid van Hylckama; Smets, Ellen M. A.

2010-01-01

The aim of this study was to investigate (potential) research participants' (a) information preferences with regard to receiving biobanks' genetic research results, and (b) attitudes towards the duties of researchers to communicate research results. A total group of 1,678 was analyzed, consisting of

Communication of Biobanks' Research Results: What Do (Potential) Participants Want?

NARCIS (Netherlands)

Meulenkamp, Tineke M.; Gevers, Sjef K.; Bovenberg, Jasper A.; Koppelman, Gerard H.; van Hylckama Vlieg, Astrid; Smets, Ellen M. A.

2010-01-01

The aim of this study was to investigate (potential) research participants' (a) information preferences with regard to receiving biobanks' genetic research results, and (b) attitudes towards the duties of researchers to communicate research results. A total group of 1,678 was analyzed, consisting of

Communication of biobanks’ research results: what do (potential) participants want?

NARCIS (Netherlands)

Meulenkamp, T.M.; Gevers, S.K.; Bovenberg, J.A.; Koppelman, G.H.; Hylckama Vlieg, A. van; Smets, E.M.A.

2010-01-01

The aim of this study was to investigate (potential) research participants' (a) information preferences with regard to receiving biobanks' genetic research results, and (b) attitudes towards the duties of researchers to communicate research results. A total group of 1,678 was analyzed, consisting of

WE-AB-207B-07: Dose Cloud: Generating “Big Data” for Radiation Therapy Treatment Plan Optimization Research

Energy Technology Data Exchange (ETDEWEB)

Folkerts, MM [University of Texas Southwestern Medical Center, Dallas, TX (United States); University of California San Diego, La Jolla, California (United States); Long, T; Tian, Z; Jia, X; Chen, M; Lu, W; Jiang, SB [University of Texas Southwestern Medical Center, Dallas, TX (United States); Radke, RJ [Rensselaer Polytechnic Institute, Troy, NY (United States)

2016-06-15

Purpose: To provide a tool to generate large sets of realistic virtual patient geometries and beamlet doses for treatment optimization research. This tool enables countless studies exploring the fundamental interplay between patient geometry, objective functions, weight selections, and achievable dose distributions for various algorithms and modalities. Methods: Generating realistic virtual patient geometries requires a small set of real patient data. We developed a normalized patient shape model (PSM) which captures organ and target contours in a correspondence-preserving manner. Using PSM-processed data, we perform principal component analysis (PCA) to extract major modes of variation from the population. These PCA modes can be shared without exposing patient information. The modes are re-combined with different weights to produce sets of realistic virtual patient contours. Because virtual patients lack imaging information, we developed a shape-based dose calculation (SBD) relying on the assumption that the region inside the body contour is water. SBD utilizes a 2D fluence-convolved scatter kernel, derived from Monte Carlo simulations, and can compute both full dose for a given set of fluence maps, or produce a dose matrix (dose per fluence pixel) for many modalities. Combining the shape model with SBD provides the data needed for treatment plan optimization research. Results: We used PSM to capture organ and target contours for 96 prostate cases, extracted the first 20 PCA modes, and generated 2048 virtual patient shapes by randomly sampling mode scores. Nearly half of the shapes were thrown out for failing anatomical checks, the remaining 1124 were used in computing dose matrices via SBD and a standard 7-beam protocol. As a proof of concept, and to generate data for later study, we performed fluence map optimization emphasizing PTV coverage. Conclusions: We successfully developed and tested a tool for creating customizable sets of virtual patients suitable for

WE-AB-207B-07: Dose Cloud: Generating “Big Data” for Radiation Therapy Treatment Plan Optimization Research

International Nuclear Information System (INIS)

Folkerts, MM; Long, T; Tian, Z; Jia, X; Chen, M; Lu, W; Jiang, SB; Radke, RJ

2016-01-01

Purpose: To provide a tool to generate large sets of realistic virtual patient geometries and beamlet doses for treatment optimization research. This tool enables countless studies exploring the fundamental interplay between patient geometry, objective functions, weight selections, and achievable dose distributions for various algorithms and modalities. Methods: Generating realistic virtual patient geometries requires a small set of real patient data. We developed a normalized patient shape model (PSM) which captures organ and target contours in a correspondence-preserving manner. Using PSM-processed data, we perform principal component analysis (PCA) to extract major modes of variation from the population. These PCA modes can be shared without exposing patient information. The modes are re-combined with different weights to produce sets of realistic virtual patient contours. Because virtual patients lack imaging information, we developed a shape-based dose calculation (SBD) relying on the assumption that the region inside the body contour is water. SBD utilizes a 2D fluence-convolved scatter kernel, derived from Monte Carlo simulations, and can compute both full dose for a given set of fluence maps, or produce a dose matrix (dose per fluence pixel) for many modalities. Combining the shape model with SBD provides the data needed for treatment plan optimization research. Results: We used PSM to capture organ and target contours for 96 prostate cases, extracted the first 20 PCA modes, and generated 2048 virtual patient shapes by randomly sampling mode scores. Nearly half of the shapes were thrown out for failing anatomical checks, the remaining 1124 were used in computing dose matrices via SBD and a standard 7-beam protocol. As a proof of concept, and to generate data for later study, we performed fluence map optimization emphasizing PTV coverage. Conclusions: We successfully developed and tested a tool for creating customizable sets of virtual patients suitable for

Next generation environment for collaborative research

International Nuclear Information System (INIS)

Collados, D.; Denis, G.; Galvez, P.; Newman, H.

2001-01-01

Collaborative environments supporting point to point and multipoint video-conferencing, document and application sharing across both local and wide area networks, video on demand (broadcast and playback) and interactive text facilities will be a crucial element for the development of the next generation of HEP experiments by geographically dispersed collaborations. The 'Virtual Room Video conferencing System' (VRVS) has been developed since 1995, in order to provide a low cost, bandwidth-efficient, extensible means for video conferencing and remote collaboration over networks within the High Energy and Nuclear Physics communities. The VRVS provides worldwide videoconferencing service and collaborative environment to the research and education communities. VRVS uses the Internet2 and ESnet high-performance networks infrastructure to deploy its Web-based system, which now includes more than 5790 registered hosts running VRVS software in more than 50 different countries. VRVS hosts an average of 100-multipoint videoconference and collaborative sessions worldwide every month. There are around 35 reflectors that manage the traffic flow, at HENP labs and universities in the US and Europe. So far, there are 7 Virtual Rooms for World Wide Conferences (involving more than one continent), and 4 Virtual Rooms each for intra-continental conferences in the US, Europe and Asia. VRVS continues to expand and implement new digital video technologies, including H.323 ITU standard integration, MPEG-2 videoconferencing integration, shared environments, and Quality of Service

Research results for the applications of high power ion beams

International Nuclear Information System (INIS)

Yang Hailiang; Qiu Aici; Sun Jianfeng; He Xiaoping; Tang Junping; Wang Haiyang; Zhang Jiasheng; Xu Ri; Peng Jianchang; Ren Shuqing; Li Peng; Yang Li; Huang Jianjun; Zhang Guoguang; Ouyang Xiaoping; Li Hongyu

2003-01-01

The results obtained in the theoretical and experimental studies for the application of high power ion beams in certain areas of nuclear physics and material science are reported. The preliminary experimental results of generating 6-7 MeV quasi-monoenergetic pulsed γ-rays with high power pulsed proton beams striking 19 F target on the Flash II accelerator are presented. By placing the target far enough downstream, the quasi-monoenergetic pulsed γ-rays can be discriminated experimentally from the diode Bremsstrahlung. This article also describes the other applications of high power ion beams and the preliminary experimental and theoretical results in simulation of soft X-ray thermal-mechanical effects, generation of high intense pulsed neutrons, equation of state and shock-wave physics experiments, surface modification and so on

High-Flux Neutron Generator Facility for Geochronology and Nuclear Physics Research

Science.gov (United States)

Waltz, Cory; HFNG Collaboration

2015-04-01

A facility based on a next-generation, high-flux D-D neutron generator (HFNG) is being commissioned at UC Berkeley. The generator is designed to produce monoenergetic 2.45 MeV neutrons at outputs exceeding 1011 n/s. The HFNG is designed around two RF-driven multi-cusp ion sources that straddle a titanium-coated copper target. D + ions, accelerated up to 150 keV from the ion sources, self-load the target and drive neutron generation through the d(d,n)3 He fusion reaction. A well-integrated cooling system is capable of handling beam power reaching 120 kW impinging on the target. The unique design of the HFNG target permits experimental samples to be placed inside the target volume, allowing the samples to receive the highest neutron flux (1011 cm-2 s-1) possible from the generator. In addition, external beams of neutrons will be available simultaneously, ranging from thermal to 2.45 MeV. Achieving the highest neutron yields required carefully designed schemes to mitigate back-streaming of high energy electrons liberated from the cathode target by deuteron bombardment. The proposed science program is focused on pioneering advances in the 40 Ar/39 Ar dating technique for geochronology, new nuclear data measurements, basic nuclear science, and education. An end goal is to become a user facility for researchers. This work is supported by NSF Grant No. EAR-0960138, U.S. DOE LBNL Contract No. DE-AC02-05CH11231, U.S. DOE LLNL Contract No. DE-AC52-07NA27344, and UC Office of the President Award 12-LR-238745.

Preparing the Next Generation of Environmental Scientists to Work at the Frontier of Data-Intensive Research

Science.gov (United States)

Hampton, S. E.

2015-12-01

The science necessary to unravel complex environmental problems confronts severe computational challenges - coping with huge volumes of heterogeneous data, spanning vast spatial scales at high resolution, and requiring integration of disparate measurements from multiple disciplines. But as cyberinfrastructure advances to support such work, scientists in many fields lack sufficient computational skills to participate in interdisciplinary, data-intensive research. In response, we developed innovative training workshops for early-career scientists, in order to explore both the needs and solutions for training next-generation scientists in skills for data-intensive environmental research. In 2013 and 2014 we ran intensive 3-week training workshops for early-career researchers. One of the workshops was run concurrently in California and North Carolina, connected by virtual technologies and coordinated schedules. We attracted applicants to the workshop with the opportunity to pursue data-intensive small-group research projects that they proposed. This approach presented a realistic possibility that publishable products could result from 3 weeks of focused hands-on classroom instruction combined with self-directed group research in which instructors were present to assist trainees. Instruction addressed 1) collaboration modes and technologies, 2) data management, preservation, and sharing, 3) preparing data for analysis using scripting, 4) reproducible research, 5) sustainable software practices, 6) data analysis and modeling, and 7) communicating results to broad communities. The most dramatic improvements in technical skills were in data management, version control, and working with spatial data outside of proprietary software. In addition, participants built strong networks and collaborative skills that later resulted in a successful student-led grant proposal, published manuscripts, and participants reported that the training was a highly influential experience.

The use of research results for effective aging management

International Nuclear Information System (INIS)

Gunther, W.E.; Taylor, J.H.

1989-01-01

The study of the degradation of structures, components, and systems due to aging is an important ongoing area of research in the nuclear industry. Efforts by the U.S. Nuclear Regulatory Commission (NRC) and the utility industry, through organizations such as the Electric Power Research Institute (EPRI), have produced substantial research results that can be used by inspectors and operators to effectively understand and manage the aging of nuclear power plants. One of the primary objectives of the NRC's Nuclear Plant Aging Research (NPAR) Program is to determine how aging affects the safety of nuclear power plants. This program uses operating experience, testing, and engineering analysis to identify failures caused by age-related degradation. Useful information on aging has also resulted from research being performed by the industry to support plant-life extension (PLEX). The EPRI program, for instance, is directed toward the resolution of issues related to materials and components. Degradation of equipment and systems due to aging can occur which, if unmitigated, could result in reduction of the nuclear power plant safety margin as the plant ages. This paper describes how aging research results may be used by plant operating management to effectively address the aging issue and by inspectors responsible for monitoring plant activities and programs

Enhanced microbial coalbed methane generation: A review of research, commercial activity, and remaining challenges

Science.gov (United States)

Ritter, Daniel J.; Vinson, David S.; Barnhart, Elliott P.; Akob, Denise M.; Fields, Matthew W.; Cunningham, Al B.; Orem, William H.; McIntosh, Jennifer C.

2015-01-01

Coalbed methane (CBM) makes up a significant portion of the world’s natural gas resources. The discovery that approximately 20% of natural gas is microbial in origin has led to interest in microbially enhanced CBM (MECoM), which involves stimulating microorganisms to produce additional CBM from existing production wells. This paper reviews current laboratory and field research on understanding processes and reservoir conditions which are essential for microbial CBM generation, the progress of efforts to stimulate microbial methane generation in coal beds, and key remaining knowledge gaps. Research has been primarily focused on identifying microbial communities present in areas of CBM generation and attempting to determine their function, in-situ reservoir conditions that are most favorable for microbial CBM generation, and geochemical indicators of metabolic pathways of methanogenesis (i.e., acetoclastic or hydrogenotrophic methanogenesis). Meanwhile, researchers at universities, government agencies, and companies have focused on four primary MECoM strategies: 1) microbial stimulation (i.e., addition of nutrients to stimulate native microbes); 2) microbial augmentation (i.e., addition of microbes not native to or abundant in the reservoir of interest); 3) physically increasing microbial access to coal and distribution of amendments; and 4) chemically increasing the bioavailability of coal organics. Most companies interested in MECoM have pursued microbial stimulation: Luca Technologies, Inc., successfully completed a pilot scale field test of their stimulation strategy, while two others, Ciris Energy and Next Fuel, Inc., have undertaken smaller scale field tests. Several key knowledge gaps remain that need to be addressed before MECoM strategies can be implemented commercially. Little is known about the bacterial community responsible for coal biodegradation and how these microorganisms may be stimulated to enhance microbial methanogenesis. In addition, research

Thermal hydraulic research on next generation PWRs using ROSA/LSTF

International Nuclear Information System (INIS)

Yonomoto, T.; Anoda, Y.

2000-01-01

A thermal-hydraulic research on next generation PWRs has been conducted at JAERI using the ROSA-V/Large Scale Test Facility (LSTF), focusing on phenomena related to passive safety systems. This paper describes two test results conducted for this research: a small break loss-of-coolant accident (SBLOCA) test and a low pressure steady-state natural circulation (NC) test. The former test investigated a combined use of a SG secondary-side automatic depressurization system (SADS) and a gravity-driven injection system (GDIS) to mitigate a SBLOCA. The results have shown that the primary loop can be depressurized to the GDIS actuation pressure of 0.2 MPa by the SADS alone, and then the stable long-term core cooling can be established by NC. Results of both tests showed a complicated nonuniform flow behavior among SG U-tubes during NC, which was characterized by the coexistence of concurrent condensing two-phase flow in some tubes and stagnant two-phase stratification in the others. The mechanism for the stratification was understood from the measured secondary side temperature distribution showing the lowest temperature at the top and bottom regions and the highest around the midplane. This was caused by the saturation temperature difference corresponding to the static pressure difference, and the recirculation in the secondary. This secondary side temperature distribution enabled the condensation occurring around the tube top to be balanced with evaporation occurring around the midplane in the U-tube with the stratification. Since the heat transfer occurs primarily through tubes with the concurrent flow, the nonuniform behavior directly affects the effective heat transfer area at SG. When the SG primary side was modeled with one lumped flow channel, the RELAP5 significantly over predicted the primary depressurization rate, and could not predict the stable long-term core cooling behavior at low pressure. In order to understand the mechanism of the nonuniform behavior, the

Radionuclide generators

International Nuclear Information System (INIS)

Lambrecht, R.M.; Wollongong Univ.; Tomiyoshi, K.; Sekine, T.

1997-01-01

The present status and future directions of research and development on radionuclide generator technology are reported. The recent interest to develop double-neutron capture reactions for production of in vivo generators; neutron rich nuclides for radio-immunotherapeutic pharmaceuticals: and advances with ultra-short lived generators is highlighted. Emphasis is focused on: production of the parent radionuclide; the selection and the evaluation of support materials and eluents with respect to the resultant radiochemical yield of the daughter, and the breakthrough of the radionuclide parent: and, the uses of radionuclide generators in radiopharmaceutical chemistry, biomedical and industrial applications. The 62 Zn → 62 Cu, 66 Ni → 66 Cu, 103m Rh → 103 Rh, 188 W → 188 Re and the 225 Ac → 221 Fr → 213 Bi generators are predicted to be emphasized for future development. Coverage of the 99 Mo → 99m Tc generator was excluded, as it the subject of another review. The literature search ended June, 1996. (orig.)

Research and Development Supporting a Next Generation Germanium Double Beta Decay Experiment

Science.gov (United States)

Rielage, Keith; Elliott, Steve; Chu, Pinghan; Goett, Johnny; Massarczyk, Ralph; Xu, Wenqin

2015-10-01

To improve the search for neutrinoless double beta decay, the next-generation experiments will increase in source mass and continue to reduce backgrounds in the region of interest. A promising technology for the next generation experiment is large arrays of Germanium p-type point contact detectors enriched in 76-Ge. The experience, expertise and lessons learned from the MAJORANA DEMONSTRATOR and GERDA experiments naturally lead to a number of research and development activities that will be useful in guiding a future experiment utilizing Germanium. We will discuss some R&D activities including a hybrid cryostat design, background reduction in cabling, connectors and electronics, and modifications to reduce assembly time. We acknowledge the support of the U.S. Department of Energy through the LANL/LDRD Program.

Report of results and progress research (1982-1984) total research on long life radioactive waste management

International Nuclear Information System (INIS)

1985-03-01

The specific research ''Synthetic research on long life radioactive waste management'' has been advanced in the Research Center for Nuclear Energy, University of Tokyo, for three years since 1982. This research was roughly divided into material science, biology and process engineering, and the research has been advanced according to 14 subthemes by the cooperation of the researchers in wide fields in the university. In this report, the report of the progress of research and the data on the results of researche from fiscal year 1982 to 1984 are summarized. The title of research, organization, the persons in charge, the period of research, the title of report, the objective, contents, state of progress, results obtained in 1984 and results obtained during three years of 5 material group papers, 7 process group papers and 4 biology group papers are given. (Kako, I.)

Search Results | IDRC - International Development Research Centre

International Development Research Centre (IDRC) Digital Library (Canada)

Results 1 - 10 of 8533 ... Research findings illustrate how environmental degradation and insecure ... Healing and resilience in situations of conflict and displacement ... Rapid global urbanization presents important social, environmental, and ...

Exploring generational cohort work satisfaction in hospital nurses.

Science.gov (United States)

Gordon, Pamela Ann

2017-07-03

Purpose Although extensive research exists regarding job satisfaction, many previous studies used a more restrictive, quantitative methodology. The purpose of this qualitative study is to capture the perceptions of hospital nurses within generational cohorts regarding their work satisfaction. Design/methodology/approach A preliminary qualitative, phenomenological study design explored hospital nurses' work satisfaction within generational cohorts - Baby Boomers (1946-1964), Generation X (1965-1980) and Millennials (1981-2000). A South Florida hospital provided the venue for the research. In all, 15 full-time staff nurses, segmented into generational cohorts, participated in personal interviews to determine themes related to seven established factors of work satisfaction: pay, autonomy, task requirements, administration, doctor-nurse relationship, interaction and professional status. Findings An analysis of the transcribed interviews confirmed the importance of the seven factors of job satisfaction. Similarities and differences between the generational cohorts related to a combination of stages of life and generational attributes. Practical implications The results of any qualitative research relate only to the specific venue studied and are not generalizable. However, the information gleaned from this study is transferable and other organizations are encouraged to conduct their own research and compare the results. Originality/value This study is unique, as the seven factors from an extensively used and highly respected quantitative research instrument were applied as the basis for this qualitative inquiry into generational cohort job satisfaction in a hospital setting.

Karlsruhe Nuclear Research Centre. Report on the results of research and development 1985

International Nuclear Information System (INIS)

1986-01-01

The report contains a description of the research projects, a list of the institutes and departments of the scientific-technical range with short articles concerning the results of the institutional work, and a bibliography of all publications of 1985. The main aspects of the projects and research programs are fast breeder, separation nozzle process, nuclear fusion, waste recycling and reprocessing, final storage, nuclear safety, the range of technique-man-environment, solid state and materials research, nuclear and elementary particle physics, and research programs of different institutes. (HK)

Research on Development of Turbo-generator with Partial Admission Nozzle for Supercritical CO{sub 2} Power Generation

Energy Technology Data Exchange (ETDEWEB)

Cho, Junhyun; Shin, Hyung-ki; Lee, Gilbong; Baik, Young-Jin [Korea Institute of Energy Research (KIER), Daejeon (Korea, Republic of); Kang, Young-Seok [Korea Aerospace Research Institute (KARI), Daejeon (Korea, Republic of); Kim, Byunghui [InGineers Ltd., Seoul (Korea, Republic of)

2017-04-15

A Sub-kWe small-scale experimental test loop was manufactured to investigate characteristics of the supercritical carbon dioxide power cycle. A high-speed turbo-generator was also designed and manufactured. The designed rotational speed of this turbo-generator was 200,000 rpm. Because of the low expansion ratio through the turbine and low mass flowrate, the rotational speed of the turbo-generator was high. Therefore, it was difficult to select the rotating parts and design the turbine wheel, axial force balance and rotor dynamics in the lab-scale experimental test loop. Using only one channel of the nozzle, the partial admission method was adapted to reduce the rotational speed of the rotor. This was the world’s first approach to the supercritical carbon dioxide turbo-generator. A cold-run test using nitrogen gas under an atmospheric condition was conducted to observe the effect of the partial admission nozzle on the rotor dynamics. The vibration level of the rotor was obtained using a gap sensor, and the results showed that the effect of the partial admission nozzle on the rotor dynamics was allowable.

Test results for a Bi-2223 HTS racetrack coil for generator applications

International Nuclear Information System (INIS)

Salasoo, L.; Herd, K.G.; Laskaris, E.T.; Hart, H.R. Jr.; Chari, M.V.K.

1996-01-01

Testing, results and analysis of a Bi-2223 model superconducting generator coil produced under the DOE Superconductivity Partnership Initiative are presented. The test arrangement enables coil energization with dc and transient currents over a range of operating temperatures to explore coil performance under conditions analogous to those that would be experienced by a superconducting generator field coil. Analytical calculations of coil ac and ohmic losses and temperature rise compare well with experimental measurements. Good performance is predicted for a typical 3-phase fault condition. Coil steady state and transient performance can be predicted with confidence for full scale superconductor application

Prostate cancer in the Baby Boomer generation: results from CaPSURE.

Science.gov (United States)

Scales, Charles D; Moul, Judd W; Curtis, Lesley H; Elkin, Eric P; Hughes, M E; Carroll, Peter R

2007-12-01

Baby Boomers (those born in 1946 to 1964) are thought to place a high value on quality of life, and have a higher propensity to consume healthcare services than previous generations. We sought to characterize prostate cancer (CaP) presentation among this group, and determine whether treatment patterns differ between Baby Boomers and the preceding generation. We defined two birth cohorts: men born in 1927 to 1945 (pre-Boomers) and Baby Boomers. Our study cohort included men less than 65 years old, diagnosed with CaP between 1999 and 2003 (Baby Boomers, n = 812; pre-Boomers, n = 1843). We compared the two groups for clinical presentation, sociodemographics, and primary treatment, controlling for age effects. The primary endpoint was selection of radical prostatectomy as primary treatment. Most Baby Boomers were diagnosed with stage T1 disease (466, 61%), biopsy Gleason sums less than 7 (572, 73%), and prostate-specific antigen levels of 4.1 to 10.0 (509, 66%). This presentation was not clinically different from pre-Boomers. Baby Boomers had higher socioeconomic status than pre-Boomers. On multivariate analysis, Baby Boomers were more likely to undergo radical prostatectomy as primary therapy (odds ratio [OR] 1.63, 95% confidence interval [CI] 1.13 to 2.35). Controlling for age effects, however, there were no significant differences in treatment choice (OR 0.86, 95% CI 0.40 to 1.87) or sociodemographics between these groups. Differences in CaP presentation and treatment between Baby Boomers and pre-Boomers may be related to age at diagnosis rather than innate differences in behavior. As more Baby Boomers are diagnosed with CaP, further research will be required to characterize this generation's impact on CaP care.

Steam Generator Group Project. Annual report, 1982

International Nuclear Information System (INIS)

Clark, R.A.; Lewis, M.

1984-02-01

The Steam Generator Group Project (SGGP) is an NRC program joined by additional sponsors. The SGGP utilizes a steam generator removed from service at a nuclear plant (Surry 2) as a vehicle for research on a variety of safety and reliability issues. This report is an annual summary of progress of the program for 1982. Information is presented on the Steam Generator Examination Facility (SGEF), especially designed and constructed for this research. Loading of the generator into the SGEF is then discussed. The report then presents radiological field mapping results and personnel exposure monitoring. This is followed by information on field reduction achieved by channel head decontaminations. The report then presents results of a secondary side examination through shell penetrations placed prior to transport, confirming no change in generator condition due to transport. Decontamination of the channel head is discussed followed by plans for eddy current testing and removal of the plugs placed during service. Results of a preliminary profilometry examination are then provided

ACADEMIC PARTNERSHIP AND GENERATION OF SCIENTIFIC KNOWLEDGE: THE CASE OF THE INTERNATIONAL NETWORK OF RESEARCHERS ON COMPETITIVENESS

Directory of Open Access Journals (Sweden)

José Guadalupe Vargas Hernández

2011-03-01

Full Text Available This paper has the objective to demonstrate the contributions achieved by the International Network of Researchers in Competitiveness (INRCO in academic collaboration and scientific knowledge generation. Part of the assumption sustaining that economic globalization processes, information and communication technologies revolution lead to the increasing environmental complexity and uncertainty of a knowledge society. One answer is the study and analysis of competitiveness considered as the strategy to achieve higher levels of economic growth and socio-cultural development in all micro, meso and macro levels. The method used is the analytic-deductive based on the evidence of related data with the activity and results in publications of the International Network of Researchers in Competitiveness. Consequently, it has been adapted certain speculative notions in a theoretical analysis exploring the social dynamics of the scientific activities. It is concluded that the management of the researchers’ dynamic network is capable to generate, apply and recycle the critical knowledge and the assets of academic and scientific talent through a dynamic combination of resources that have a position inside the formal e informal borders and between these borders of participant academics and institutions.

Integration of Research for an Exhaust Thermoelectric Generator and the Outer Flow Field of a Car

Science.gov (United States)

Jiang, T.; Su, C. Q.; Deng, Y. D.; Wang, Y. P.

2017-05-01

The exhaust thermoelectric generator (TEG) can generate electric power from a car engine's waste heat. It is important to maintain a sufficient temperature difference across the thermoelectric modules. The radiator is connected to the cooling units of the thermoelectric modules and used to take away the heat from the TEG system. This paper focuses on the research for the integration of a TEG radiator and the flow field of the car chassis, aiming to cool the radiator by the high speed flow around the chassis. What is more, the TEG radiator is designed as a spoiler to optimize the flow field around the car chassis and even reduce the aerodynamic drag. Concentrating on the flow pressure of the radiator and the aerodynamic drag force, a sedan model with eight different schemes of radiator configurations are studied by computational fluid dynamics simulation. Finally, the simulation results indicate that a reasonable radiator configuration can not only generate high flow pressure to improve the cooling performance, which provides a better support for the TEG system, but also acts as a spoiler to reduce the aerodynamic drag force.

MAGNUM-PSI, a plasma generator for plasma-surface interaction research in ITER-like conditions

International Nuclear Information System (INIS)

Goedheer, W.J.; Rooij, G.J. van; Veremiyenko, V.; Ahmad, Z.; Barth, C.J.; Eck, H.J.N. van; Groot, B. de; Hellermann, M.G. von; Kruijtzer, G.L.; Wolff, J.C.; Brezinsek, S.; Philipps, V.; Pospieszczyk, A.; Samm, U.; Schweer, B.; Dahiya, R.P.; Engeln, R.A.H.; Schram, D.C.; Fantz, U.; Kleyn, A.W.; Lopes Cardozo, N.J.

2005-01-01

The FOM-Institute for Plasma Physics - together with its TEC partners - is preparing the construction of Magnum-psi, a magnetized (3 T), steady-state, large area (100 cm 2 ), high-flux (up to 10 24 H + ions m -2 s -1 ) plasma generator. The research programme of Magnum-psi will address the questions for the ITER divertor: erosion, redeposition and hydrogen retention with carbon substrates, melting of metal surfaces, erosion and redeposition with mixed materials. In order to explore and develop the techniques to be applied in Magnum-psi, a pilot experiment (Pilot-psi), operating at a magnetic field up to 1.6 Tesla, has been constructed. Pilot-psi produces a hydrogen plasma beam with the required parameters (T e ≤ 1eV and flux ≥ 10 23 m -2 s -1 ) over an area of 1 cm 2 . In this paper the results of extensive diagnostic measurements on Pilot-psi (a.o., Thomson Scattering and high-resolution spectroscopy), combined with numerical studies of the source and the expansion of the plasma will be presented to demonstrate the feasibility of the large Magnum-psi plasma generator. (author)

Prejudice and Health Anxiety about Radiation Exposure from Second-Generation Atomic Bomb Survivors: Results from a Qualitative Interview Study

Directory of Open Access Journals (Sweden)

Yuka Kamite

2017-08-01

Full Text Available The effect of atomic bomb radiation exposure on the survivors and their children has been a worrisome problem since soon after the 1945 Hiroshima and Nagasaki bombings. Researchers have examined physical and genetic effects; however, no research has focused on second-generation survivors’ (SGS psychological effects. Consequently, this study shed light on the SGS’ experience of discrimination and prejudice and their anxiety concerning the genetic effects of radiation exposure. This study utilized semi-structured interviews with 14 SGS (10 women, mean age = 56 ± 6.25 years, range = 46–68 years. Data were analyzed using a modified version of the grounded theory approach. Three categories were extracted: low awareness as an SGS, no health anxiety regarding the effect of radiation, and health anxiety regarding the effect of radiation. The results did not reveal that SGS who grew up in the bombed areas experienced discrimination or prejudice. They had little health anxiety from childhood to adolescence. In this study, some of the SGS developed health anxiety about their third-generation children, but only among female participants. Perhaps the transgenerational transmission of anxiety concerning the genetic effects of radiation exposure causes stress, particularly among women with children. However, a change was seen in adulthood health anxiety regarding the effects of radiation, suggesting the possibility that changes in the psychological experiences of SGS can be observed throughout their lifetimes and that their own health status, and that of their children, the third-generation survivors, affects their health anxiety regarding radiation.

Optimization Research of Generation Investment Based on Linear Programming Model

Science.gov (United States)

Wu, Juan; Ge, Xueqian

Linear programming is an important branch of operational research and it is a mathematical method to assist the people to carry out scientific management. GAMS is an advanced simulation and optimization modeling language and it will combine a large number of complex mathematical programming, such as linear programming LP, nonlinear programming NLP, MIP and other mixed-integer programming with the system simulation. In this paper, based on the linear programming model, the optimized investment decision-making of generation is simulated and analyzed. At last, the optimal installed capacity of power plants and the final total cost are got, which provides the rational decision-making basis for optimized investments.

Research on Control Strategy of Free-Piston Stirling Power Generating System

Directory of Open Access Journals (Sweden)

Jigui Zheng

2017-10-01

Full Text Available As a clean and fuel adaptive alternative power plant, the Stirling power generating system has drawn attention of experts and scholars in the energy field. In practical application, the instability of free-piston Stirling power generating system caused by abrupt load change is an inevitable problem. Thus, methods to improve the output frequency response and stability of the free-piston Stirling power generating system are necessary. The model of free-piston Stirling power generating system is built by isothermal analysis firstly, and the initial control strategy based on given voltage system is put forward. To further improve the performance of power system, a current feedback decoupling control strategy is proposed, and the mathematical model is established. The influence of full decoupled quadrature-direct (d-q axis currents is analyzed with respect to the output voltage adjusting time and fluctuation amplitude under the variations of piston displacement and output load. The simulation results show that the system performance is significantly improved, but the dynamic regulation lags caused by the decoupled current control still exist. To solve this problem and improve the performance of decoupled-state feedback current control that relies on parameter accuracy, internal model control based on sliding mode (IMC-SM current decoupling control strategy is proposed, the system model is established, and then the performance of voltage ripple in generating mode is improved. Finally, the test bench is built, and the steady state and transient voltage control performances are tested. The feasibility and priority of the control strategy is verified by experiment and simulation results.

International Research Results and Accomplishments From the International Space Station

Science.gov (United States)

Ruttley, Tara M.; Robinson, Julie A.; Tate-Brown, Judy; Perkins, Nekisha; Cohen, Luchino; Marcil, Isabelle; Heppener, Marc; Hatton, Jason; Tasaki, Kazuyuki; Umemura, Sayaka;

Results of acoustic measurements with an electric boiling generator at KNK II

International Nuclear Information System (INIS)

Aberle, J.

1987-08-01

With regard to an integral core surveillance in sodium-cooled breeder reactors acoustic measurement techniques are under development. To determine experimentally the acoustic transfer function of a reactor core and to demonstrate the detectability of local sodium boiling, experiments with a so-called Boiling Generator were carried out in the KNK II reactor. The main part of this Boiling Generator was an electrically heated pin bundle which was equipped with a local blockage to obtain cooling disturbances. In this report the results of the acoustic measurements carried out with the Boiling Generator are presented. Main topic of the evaluation is the determination of the acoustic transfer function between the core and the upper sodium plenum. The signal conditioning necessary prior to this investigation is also explained. Great effort was required to suppress electrical disturbances which superimposed the acoustic signals and could not be eliminated by the hardware during the experiments. Finally, the detectability of local boiling using acoustic measurements is considered

Did accelerated depreciation result in lower generation efficiencies for wind plants in India: An empirical analysis

International Nuclear Information System (INIS)

Shrimali, Gireesh; Pusarla, Shreya; Trivedi, Saurabh

2017-01-01

India ranks fifth in wind energy installations in the world; with an installed wind capacity is 22 GW at the end of 2014. This has been made possible by a combination of federal financial incentives and state-level feed in tariffs. The federal policies are accelerated depreciation, which allows for higher depreciations in earlier years; and generation based incentive, which provides a premium for each unit of generation. Accelerated depreciation appears to be more effective from deployment and cost perspectives; whereas, generation based incentive is said to be more effective in incentivizing generation. In this paper, using multivariable linear regressions on a sample of approximately 40 wind plants, while controlling for wind regime and wind turbine technology, we investigate the incremental impact of generation based incentive compared to accelerated depreciation. We find that generation based incentive results in at least 3 percentage points higher plant load factors than accelerated depreciation. This indicates that, if higher generation is the goal of renewable policies, generation based incentive should be preferred to accelerated depreciation. This would be similar to the move from investment tax credit to production tax credit in the U.S. - Highlights: • We examine generation effectiveness of federal renewable policies in India. • We examine accelerated depreciation and generation based incentives. • We use a cross-sectional regression analysis on a sample of approx. 40 wind plants. • Generation based incentive results in 3 percentage points higher plant load factor.

[New-generation high-throughput technologies based 'omics' research strategy in human disease].

Science.gov (United States)

Yang, Xu; Jiao, Rui; Yang, Lin; Wu, Li-Ping; Li, Ying-Rui; Wang, Jun

2011-08-01

In recent years, new-generation high-throughput technologies, including next-generation sequencing technology and mass spectrometry method, have been widely applied in solving biological problems, especially in human diseases field. This data driven, large-scale and industrialized research model enables the omnidirectional and multi-level study of human diseases from the perspectives of genomics, transcriptomics and proteomics levels, etc. In this paper, the latest development of the high-throughput technologies that applied in DNA, RNA, epigenomics, metagenomics including proteomics and some applications in translational medicine are reviewed. At genomics level, exome sequencing has been the hot spot of the recent research. However, the predominance of whole genome resequencing in detecting large structural variants within the whole genome level is coming to stand out as the drop of sequencing cost, which also makes it possible for personalized genome based medicine application. At trancriptomics level, e.g., small RNA sequencing can be used to detect known and predict unknown miRNA. Those small RNA could not only be the biomarkers for disease diagnosis and prognosis, but also show the potential of disease treatment. At proteomics level, e.g., target proteomics can be used to detect the possible disease-related protein or peptides, which can be useful index for clinical staging and typing. Furthermore, the application and development of trans-omics study in disease research are briefly introduced. By applying bioinformatics technologies for integrating multi-omics data, the mechanism, diagnosis and therapy of the disease are likely to be systemically explained and realized, so as to provide powerful tools for disease diagnosis and therapies.

Experience of research, design, capacity, and operation with forced flow steam generators

International Nuclear Information System (INIS)

Bertolotti, G.; McDonald, B.N.; Pocock, F.J.

1975-01-01

The forced flow steam generators in operation in six American nuclear power plants show an excellent operational behaviour. The concept for this type of steam generator has been developed in the USA, and it has been successfully tested over several years regarding its suitability for PWRs of a larger size. The results concerning construction, materials and water chemistry for this steam generator, which will be used for the first time in the FRG in the nuclear power station Muelheim-Kaerlich, have confirmed the high reliability of this high-efficiency component. (orig./LN) [de

Fossil fuel power generation within the European Research Area

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-12-10

The report is the first in a series of three produced by the PowerClean Thematic Network that looks at and defines future requirements for research and development of fossil fuel power generation in the European Union. It makes the case for fossil fuel R & D with emphasis on the need for clean coal technologies (to increased efficiency and other CO{sub 2} capture and storage) For satisfying future energy demands of the enlarged European Union between now and 2030. The report concludes that affirmative R, D and D action is needed to support the EU power industry, working together on a Europe-wide basis, to establish the use of coal and other fossil fuels in near-zero emissions power plant. The role model would be the European Research Area, as in the Sixth Framework Programme (FP6), but with a more comprehensive range of technical objectives recognising the importance of fossil fuels. Section headings are: introduction; current energy use; future needs and requirements; the future for clean fossil fuel energy in Europe; comparison with approaches adopted elsewhere (USA Vision 21 and FutureGen programmes, Japan); and responsibilities for EU coal R, D & D. 14 refs., 9 figs., 4 tabs.

Research on DC Micro-grid system of photovoltaic power generation

Science.gov (United States)

Zheng, Yiming; Wang, Xiaohui

2018-01-01

The use of energy has become a topic of concern, the demand of people for power grows in number or quantity with the development of economy. It is necessary to consider using new forms of power supply-microgrid system for distributed power supply. The power supply mode can not only effectively solve the problem of excessive line loss in the large power grid, but also can increase the reliability of the power supply, and is economical and environmental friendly. With the increasing of DC loads, in order to improve the utilization efficiency, the DC microgrid power supply problems are begin to be researched and integrated with the renewable energy sources. This paper researched the development of microgrid, compared AC microgrid with DC microgrid, summarized the distribution of DC bus voltage level, the DC microgrid network form, the control mode and the main power electronics elements of DC microgrid of photovoltaic power generation system. Today, the DC microgrid system is still in the development stage without uniform voltage level standard, however, it will come into service in the future.

IRB PERSPECTIVES ON THE RETURN OF INDIVIDUAL RESULTS FROM GENOMIC RESEARCH

Science.gov (United States)

Dressler, Lynn G.; Smolek, Sondra; Ponsaran, Roselle; Markey, Janell M.; Starks, Helene; Gerson, Nancy; Lewis, Susan; Press, Nancy; Juengst, Eric; Wiesner, Georgia L.

2012-01-01

Purpose Return of individual research results from genomic studies is a hotly debated ethical issue in genomic research. However, the perspective of key stakeholders—Institutional Review Board (IRB) reviewers—has been missing from this dialogue. This study explores the positions and experiences of IRB members and staff regarding this issue. Methods In depth interviews with 31 IRB professionals at six sites across the United States. Results IRB professionals agreed that research results should be returned to research participants when results are medically actionable but only if the participants wanted to know the result. Many respondents expected researchers to address the issue of return of results (ROR) in the IRB application and informed-consent document. Many respondents were not comfortable with their expertise in genomics research, and only a few described actual experiences in addressing ROR. Although participants agreed that guidelines would be helpful, most were reticent to develop them in isolation. Even where IRB guidance exists (e.g., CLIA lab certification required for return), in practice, the guidance has been overruled to allow return (e.g., no CLIA lab performs the assay). Conclusion An IRB-researcher partnership is needed to help inform responsible and feasible institutional approaches to returning research results. PMID:22241094

Evaluation of the Performance of ClimGen and LARS-WG models in generating rainfall and temperature time series in rainfed research station of Sisab, Northern Khorasan

Directory of Open Access Journals (Sweden)

najmeh khalili

2016-10-01

Full Text Available Introduction:Many existing results on water and agriculture researches require long-term statistical climate data, while practically; the available collected data in synoptic stations are quite short. Therefore, the required daily climate data should be generated based on the limited available data. For this purpose, weather generators can be used to enlarge the data length. Among the common weather generators, two models are more common: LARS-WG and ClimGen. Different studies have shown that these two models have different results in different regions and climates. Therefore, the output results of these two methods should be validated based on the climate and weather conditions of the study region. Materials and Methods:The Sisab station is 35 KM away from Bojnord city in Northern Khorasan. This station was established in 1366 and afterwards, the meteorological data including precipitation data are regularly collected. Geographical coordination of this station is 37º 25׳ N and 57º 38׳ E, and the elevation is 1359 meter. The climate in this region is dry and cold under Emberge and semi-dry under Demarton Methods. In this research, LARG-WG model, version 5.5, and ClimGen model, version 4.4, were used to generate 500 data sample for precipitation and temperature time series. The performance of these two models, were evaluated using RMSE, MAE, and CD over the 30 years collected data and their corresponding generated data. Also, to compare the statistical similarity of the generated data with the collected data, t-student, F, and X2 tests were used. With these tests, the similarity of 16 statistical characteristics of the generated data and the collected data has been investigated in the level of confidence 95%. Results and Discussion:This study showed that LARS-WG model can better generate precipitation data in terms of statistical error criteria. RMSE and MAE for the generated data by LAR-WG were less than ClimGen model while the CD value of

Researchers' Incentives and the Dearth of Practical Research Results.

Science.gov (United States)

Armstrong, David G.

1980-01-01

Educational researchers have been influenced too much by research schema derived from the assumptions of empirical researchers in the sciences. Theory building should be sacrificed for the development of research products with clearer, more concrete relevance for teachers. (JN)

Magnetohydrodynamic power generation

International Nuclear Information System (INIS)

Sheindlin, A.E.; Jackson, W.D.; Brzozowski, W.S.; Rietjens, L.H.Th.

1979-01-01

The paper describes research and development in the field of magnetohydrodynamic power generation technology, based on discussions held in the Joint IAEA/UNESCO International Liaison Group on MHD electrical power generation. Research and development programmes on open cycle, closed cycle plasma and liquid-metal MHD are described. Open cycle MHD has now entered the engineering development stage. The paper reviews the results of cycle analyses and economic and environmental evaluations: substantial agreement has been reached on the expected overall performance and necessary component specifications. The achievement in the Soviet Union on the U-25 MHD pilot plant in obtaining full rated electrical power of 20.4 MW is described, as well as long duration testing of the integrated operation of MHD components. Work in the United States on coal-fired MHD generators has shown that, with slagging of the walls, a run time of about one hundred hours at the current density and electric field of a commercial MHD generator has been achieved. Progress obtained in closed cycle plasma and liquid metal MHD is reviewed. Electrical power densities of up to 140 MWe/m 3 and an enthalpy extraction as high as 24 per cent have been achieved in noble gas MHD generator experiments. (Auth.)

A Study on the Planning of Technology Development and Research for Generation IV Nuclear Energy Systems

Energy Technology Data Exchange (ETDEWEB)

Chang, Moon Hee; Kim, H. R.; Kim, H. J. and others

2005-08-15

This study aimed at the planning the domestic technology development of the Gen IV and the formulating the international collaborative project contents and executive plan for 'A Validity Assessment and Policies of the R and D of Generation IV Nuclear Energy Systems'. The results of the study include follows; - Survey of the technology state in the fields of the Gen IV system specific technologies and the common technologies, and the plans of the international collaborative research - Drawing up the executive research and development plan by the experts of the relevant technology field for the systems which Korean will participate in. - Formulating the effective conduction plan of the program reflecting the view of the experts from the industry, the university and the research institute. - Establishing the plan for estimation of the research fund and the manpower for the efficient utilization of the domestic available resources. This study can be useful material for evaluating the appropriateness of the Korea's participation in the international collaborative development of the Gen IV, and can be valuably utilized to establish the strategy for the effective conduction of the program. The executive plan of the research and development which was produced in this study will be used to the basic materials for the establishing the guiding direction and the strategic conduction of the program when the research and development is launched in the future.

Ethnical distance in Vojvodina: Research results

Directory of Open Access Journals (Sweden)

Lazar Žolt

2005-01-01

Full Text Available This article presents the results of the ethnical distance measuring in Vojvodina, the north Province of the Republic of Serbia. The measuring was carried out on autumn 2002, during realization of the wider project of multiculturalism research in the mentioned region. According to the results the ethnical distances in Vojvodina are quite equalized and they are grouped around the attitude "all the same". Vojvodinian Serbs are more favorable partners for the majority of social contacts, and the relatively largest distance is shown toward Roma. The ethnical distance results also discovers two very important factors for understanding the interethnic relations in Vojvodina: first, the "rational" kind of social contacts with the members of the other ethnical groups are more preferable for the majority of respondents, and second, they have very equal distances toward their own ethnical groups.

Search Results | IDRC - International Development Research Centre

International Development Research Centre (IDRC) Digital Library (Canada)

Results 1 - 10 of 8530 ... Fostering women's leadership to advance human rights in informal settlements. IDRC-supported researcher Jane Weru discusses the role of women in ... to curb tobacco consumption and prevent tobacco-related diseases. ... Accusations of sexual assault have been reported against public figures in ...

Bibliography of clinical research in malaysia: methods and brief results.

Science.gov (United States)

Teng, C L; Zuhanariah, M N; Ng, C S; Goh, C C

2014-08-01

This article describes the methodology of this bibliography. A search was conducted on the following: (1) bibliographic databases (PubMed, Scopus, and other databases) using search terms that maximize the retrieval of Malaysian publications; (2) Individual journal search of Malaysian healthrelated journals; (3) A targeted search of Google and Google Scholar; (4) Searching of Malaysian institutional repositories; (5) Searching of Ministry of Health and Clinical Research Centre website. The publication years were limited to 2000- 2013. The citations were imported or manually entered into bibliographic software Refworks. After removing duplicates, and correcting data entry errors, PubMed's Medical Subject Headings (MeSH terms) were added. Clinical research is coded using the definition "patient-oriented-research or research conducted with human subjects (or on material of human origin) for which the investigator directly interacts with the human subjects at some point during the study." A bibliography of citations [n=2056] that fit the criteria of clinical research in Malaysia in selected topics within five domains was generated: Cancers [589], Cardiovascular diseases [432], Infections [795], Injuries [142], and Mental Health [582]. This is done by retrieving citations with the appropriate MESH terms, as follow: For cancers (Breast Neoplasms; Colorectal Neoplasms; Uterine Cervical Neoplasms), for cardiovascular diseases (Coronary Disease; Hypertension; Stroke), for infections (Dengue; Enterovirus Infections, HIV Infections; Malaria; Nipah Virus; Tuberculosis), for injuries (Accidents, Occupational; Accidents, Traffic; Child Abuse; Occupational Injuries), for mental health (Depression; Depressive Disorder; Depressive Disorder, Major; Drug Users; Psychotic Disorders; Suicide; Suicide, Attempted; Suicidal Ideation; Substance- Related Disorders).

Nuclear systems of the future: international forum generation 4 and research and development projects at the Cea

International Nuclear Information System (INIS)

Carre, F.

2003-01-01

To advance nuclear energy to meet future energy needs, ten countries have agreed to develop a future generation of nuclear energy systems, known as Generation 4. A technology road map to guide the Generation 4 effort was begun. This document presents the goals for these nuclear systems and the research programs of the Cea on the gas technology, GT-MHR, VHTR and GFR and the other systems as sodium Fast Neutron reactors, supercritical water and space nuclear. (A.L.B.)

Removal of radon decay products with ion generators - comparison of experimental results with theory

International Nuclear Information System (INIS)

Maher, E.F.; Rudnick, S.N.; Moeller, D.W.

1985-01-01

The potential of ion generators to remove radon decay products from the airspace of residences or mines was investigated both experimentally and theoretically. A positive ion generator, producing an air ion current of less than 2 μA and operated in a 78 m 3 chamber with air exchange rates ranging from 0.2 to 0.8-hr -1 and relative humidities ranging from 20 to nearly 100%, reduced the concentrations of airborne radon decay products by as much as 85%. A negative ion generator, operated under the same range of conditions, was less effective, producing airborne radon decay product removals up to 67%. Experimental results compared favorably with a simple theoretical model that hypothesizes a three-part process: 1) radon decay products, as well as aerosol particles to which some of these decay products attach, are charged by diffusion of the air ions produced by the generator; 2) the air ions also produce a nonuniform space charge in the chamber that results in an electric field gradient radially outwards from the generator to the chamber surfaces; and 3) because of the influence of this electric field, the charged decay products and particles migrate toward nearby surfaces where they plate out. The net benefit of unipolar space charging is a substantial decrease in the steady-state radon decay product concentrations in the airspace with a corresponding reduction in the lung dose equivalent to the occupants

Exploring risk communication - results of a research project focussed on effectiveness evaluation

Science.gov (United States)

Charrière, Marie; Bogaard, Thom; Junier, Sandra; Mostert, Erik

2016-04-01

The need for effective science communication and outreach efforts is widely acknowledged in the academic community. In the field of Disaster Risk Reduction, the importance of communication is clearly stressed, e.g. in the newly adopted Sendai Framework for Disaster Risk Reduction 2015-2030 (under the 1st priority of action: understanding disaster risk). Consequently, we see increasing risk communication activities. However, the effectiveness of these activities is rarely evaluated. To address this gap, several research activities were conducted in the context of the Marie Curie Initial Training Network "Changes", the results of which we will present and discuss. First, results of a literature review show, among others, that research on effectiveness is mainly focussed on the assessment of users' needs and their ability to understand the content, rather than on the final impact of the risk communication efforts. Moreover, lab-environment research is more often undertaken than assessment of real communication efforts. Second, a comparison between perceptions of risk managers and the general public of risk communication in a French Alps Valley highlighted a gap between the two groups in terms of amount of information needed (who wants more), the important topics to address (what) and the media to use (how). Third, interviews with developers of smartphone applications for disseminating avalanche risk information showed a variety of current practices and the absence of measurements of real their effectiveness. However, our analysis allowed identifying good practices that can be an inspiration for risk communication related to other hazards. Fourth, an exhibition has been set up following a collaborative approached based on stakeholder engagement. Using a pre/post-test design, the immediate impact of the exhibition, which aimed at increasing the risk awareness of the population (Ubaye Valley, France), was measured. The data obtained suggests that visiting the exhibition

Next Generation Nuclear Plant Methods Research and Development Technical Program Plan -- PLN-2498

Energy Technology Data Exchange (ETDEWEB)

Richard R. Schultz; Abderrafi M. Ougouag; David W. Nigg; Hans D. Gougar; Richard W. Johnson; William K. Terry; Chang H. Oh; Donald W. McEligot; Gary W. Johnsen; Glenn E. McCreery; Woo Y. Yoon; James W. Sterbentz; J. Steve Herring; Temitope A. Taiwo; Thomas Y. C. Wei; William D. Pointer; Won S. Yang; Michael T. Farmer; Hussein S. Khalil; Madeline A. Feltus

2008-09-01

One of the great challenges of designing and licensing the Very High Temperature Reactor (VHTR) is to confirm that the intended VHTR analysis tools can be used confidently to make decisions and to assure all that the reactor systems are safe and meet the performance objectives of the Generation IV Program. The research and development (R&D) projects defined in the Next Generation Nuclear Plant (NGNP) Design Methods Development and Validation Program will ensure that the tools used to perform the required calculations and analyses can be trusted. The Methods R&D tasks are designed to ensure that the calculational envelope of the tools used to analyze the VHTR reactor systems encompasses, or is larger than, the operational and transient envelope of the VHTR itself. The Methods R&D focuses on the development of tools to assess the neutronic and thermal fluid behavior of the plant. The fuel behavior and fission product transport models are discussed in the Advanced Gas Reactor (AGR) program plan. Various stress analysis and mechanical design tools will also need to be developed and validated and will ultimately also be included in the Methods R&D Program Plan. The calculational envelope of the neutronics and thermal-fluids software tools intended to be used on the NGNP is defined by the scenarios and phenomena that these tools can calculate with confidence. The software tools can only be used confidently when the results they produce have been shown to be in reasonable agreement with first-principle results, thought-problems, and data that describe the “highly ranked” phenomena inherent in all operational conditions and important accident scenarios for the VHTR.

Reactor safety research - results and perspectives

International Nuclear Information System (INIS)

Banaschik, M.

1989-01-01

The work performed so far is an essential contribution to the determination of the safety margins of nuclear facilities and their systems and to the further development of safety engineering. The further development of safety engineering involves a shift of emphasis in reactor safety research towards event sequences beyond the design basis. The aim of this shift in emphasis is the further development of the preventive level. This is based on the fact that the conservative design of the operating and safety systems involves and essential safety potential. The R and D work is intended to help develop accident management measures and to take the plant back into the safe state even after severe accidents. In this context, it is necessary to make full use of the safety margins of the plant and to include the operating systems for coping with accidents. As a result of the aims, the research work approaches operating and plant-specific processes. (orig./DG) [de

Next Generation Robots for STEM Education andResearch at Huston Tillotson University

Science.gov (United States)

2017-11-10

Linearization: The purpose of this lab is educate the students on how to transform the non-linear system into a linear one using a technique referred...W9H11NF-16-1-0431 Page 17 of 17 f. Lab 6: Feedback Linearization: The purpose of this lab is educate the students on how to transform the non...Report: Next Generation Robots for STEM Education and Research at Huston-Tillotson University The views, opinions and/or findings contained in this

Research in the field of development of a new generation of metal-processing machines

Directory of Open Access Journals (Sweden)

L.Tanovič

2017-12-01

Full Text Available The paper presents a review of research in the field of development of a new generation of metal-working machines for manufacturing high-precision products with dimensions of several micrometers from various materials. Presented are several new, newly created micro-machines that have the ability to manufacture products of a wide range. Studies in the field of metalworking machines and robots of a new generation with parallel kinematics, creation of machining systems for multi-axis machining, improvement and application of controllable systems, testing of processing systems in production conditions, which are conducted at the Machine-Building Faculty of the Belgrade University (Serbia are considered.

Test results of sodium-water reaction testing in near prototypical LMR steam generator

International Nuclear Information System (INIS)

Boardman, C.E.; Hui, M.; Neely, H.H.

1990-01-01

An extensive test program has been performed in the United States to investigate the effects of large sodium-water reaction events in LMFBR steam generators. Tests were conducted in the Large Leak Test Rig (LLTR) located at the Energy Technology Engineering Center (ETEC). The program was divided into two phases, Series I and Series II, for the purpose of satisfying near-term and long-term needs. Series II was further subdivided into large and intermediate leak tests. This paper will emphasize the Series II intermediate leak tests and resulting conclusions for steam generator design and operation. 11 figs, 2 tabs

Research on the Combustion Characteristics of a Free-Piston Gasoline Engine Linear Generator during the Stable Generating Process

Directory of Open Access Journals (Sweden)

Yuxi Miao

2016-08-01

Full Text Available The free-piston gasoline engine linear generator (FPGLG is a new kind of power plant consisting of free-piston gasoline engines and a linear generator. Due to the elimination of the crankshaft mechanism, the piston motion process and the combustion heat release process affect each other significantly. In this paper, the combustion characteristics during the stable generating process of a FPGLG were presented using a numerical iteration method, which coupled a zero-dimensional piston dynamic model and a three-dimensional scavenging model with the combustion process simulation. The results indicated that, compared to the conventional engine (CE, the heat release process of the FPGLG lasted longer with a lower peak heat release rate. The indicated thermal efficiency of the engine was lower because less heat was released around the piston top dead centre (TDC. Very minimal difference was observed on the ignition delay duration between the FPGLG and the CE, while the post-combustion period of the FPGLG was significantly longer than that of the CE. Meanwhile, the FPGLG was found to operate more moderately due to lower peak in-cylinder gas pressure and a lower pressure rising rate. The potential advantage of the FPGLG in lower NOx emission was also proven with the simulation results presented in this paper.

Setting global research priorities for integrated community case management (iCCM: Results from a CHNRI (Child Health and Nutrition Research Initiative exercise

Directory of Open Access Journals (Sweden)

Kerri Wazny

2014-11-01

Full Text Available Aims: to systematically identify global research gaps and resource priorities for integrated community case management (iCCM. Methods: an iCCM Child Health and Nutrition Research Initiative (CHNRI Advisory Group, in collaboration with the Community Case Management Operational Research Group (CCM ORG identified experts to participate in a CHNRI research priority setting exercise. These experts generated and systematically ranked research questions for iCCM. Research questions were ranked using a “Research Priority Score” (RPS and the “Average Expert Agreement” (AEA was calculated for every question. Our groups of experts were comprised of both individuals working in Ministries of Health or Non Governmental Organizations (NGOs in low– and middle–income countries (LMICs and individuals working in high–income countries (HICs in academia or NGO headquarters. A Spearman's Rho was calculated to determine the correlation between the two groups' research questions' ranks. Results: The overall RPS ranged from 64.58 to 89.31, with a median score of 81.43. AEA scores ranged from 0.54 to 0.86. Research questions involving increasing the uptake of iCCM services, research questions concerning the motivation, retention, training and supervision of Community Health Workers (CHWs and concerning adding additional responsibilities including counselling for infant and young child feeding (IYCF and treatment of severe acute malnutrition (SAM ranked highly. There was weak to moderate, statistically significant, correlation between scores by representatives of high–income countries and those working in–country or regionally (Spearman's ρ = 0.35034, P < 0.01. Conclusions: Operational research to determine optimal training, supervision and modes of motivation and retention for the CHW is vital for improving iCCM, globally, as is research to motivate caregivers to take advantage of iCCM services. Experts working in–country or regionally in

Optimizing nitrogen fertilizer application to irrigated wheat. Results of a co-ordinated research project. 1994-1998

International Nuclear Information System (INIS)

2000-07-01

This TECDOC summarizes the results of a Co-ordinated Research Project (CRP) on the Use of Nuclear Techniques for Optimizing Fertilizer Application under Irrigated Wheat to Increase the Efficient Use of Nitrogen Fertilizer and Consequently Reduce Environmental Pollution. The project was carried out between 1994 and 1998 through the technical co-ordination of the Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture. Fourteen Member States of the IAEA and FAO carried out a series of field experiments aimed at improving irrigation water and fertilizer-N uptake efficiencies through integrated management of the complex Interactions involving inputs, soils, climate, and wheat cultivars. Its goals were: to investigate various aspects of fertilizer N uptake efficiency of wheat crops under irrigation through an interregional research network involving countries growing large areas of irrigated wheat; to use 15 N and the soil-moisture neutron probe to determine the fate of applied N, to follow water and nitrate movement in the soil, and to determine water balance and water-use efficiency in irrigated wheat cropping systems; to use the data generated to further develop and refine various relationships in the Ceres-Wheat computer simulation model; to use the knowledge generated to produce a N-rate-recommendation package to refine specific management strategies with respect to fertilizer applications and expected yields

Achievement report on developing superconductor power applied technologies in fiscal 1999 (2). Research and development of superconductor wire materials, research and development of superconductor power generators, research of total systems, research and development of freezing systems, and verification tests; 1999 nendo chodendo denryoku oyo gijutsu kaihatsu seika hokokusho. 2. Chodendo senzai no kenkyu kaihatsu / chodendo hatsudenki no kenkyu kaihatsu / total system no kenkyu / reito system no kenkyu kaihatsu / jissho shiken

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

With an objective to achieve higher efficiency, higher density, and higher stability in power systems, research and development has been performed on superconductor power generators. This paper summarizes the achievements thereof in fiscal 1999. A verification test was given on the rotor of an ultra high speed responding generator. In a sudden short circuit test using the different phase charging method, no anomalies were found such as quench generation and vibration changes, wherein the healthiness of the generator was verified. In the VVVF actuation test, knowledge was acquired on the actuation method when the ultra high speed responding generator is applied to a combined cycle plant. After the verification test has been completed, the disassembly inspections such as visual check and non-destructive test were performed. With regard to the vacuum leakage found in the rotor under very low temperatures, the causes were presumed and the countermeasures were discussed by observing the weld structures. In the design research, the conception design on the 200-MW pilot generator was reviewed by reflecting the results of the verification tests on the model generator. At the same time, trial design was made on a 600-MW target generator. In summarizing the overall research achievements, the achievements and evaluations were summarized on technological issues that have been allotted to each research member. (NEDO)

Interim report on research and development of magnetohydrodynamic (MHD) power generation. General remarks; Denji ryutai (MHD) hatsuden kenkyu kaihatsu chukan hokokusho. Soron

Energy Technology Data Exchange (ETDEWEB)

NONE

1973-08-01

This report covers the MHD power generation research and development project which has been under way for 7 years since fiscal 1966, and contains guidelines to follow in the next 3 years during which studies will continue toward the consummation of the project. Subjected to research and development under this project are the development of superconductive magnets and helium refrigeration/liquefaction equipment, clarification of the power generation characteristics of the 1,000kW-class MHD (magnetohydrodynamic) power generator and of a test machine designed for a long-term operation, etc. Since they contain many basic studies, the efforts are being exerted primarily by the Electrotechnical Laboratory. In the research and development of MHD power generation characteristics, a power generation experiment is conducted through oxygen combustion in a hot wall channel, with the combustor and insulation against the Hall voltage improved. In this test, a maximum output of 1,182kW is achieved under the conditions of a flow rate of 2.9kg/s, a thermal input of 24.6MW, and a flux density of 3.2T. Since there are some problems to solve in connection with the stability of MHD power generation characteristics, durability of the MHD power generation channel, characteristics of heat exchanger system, measures for NOx reduction, etc., some more deliberation is necessary before taking the next research and development step. (NEDO)

African Primary Care Research: Quantitative analysis and presentation of results

Science.gov (United States)

Ogunbanjo, Gboyega A.

2014-01-01

Abstract This article is part of a series on Primary Care Research Methods. The article describes types of continuous and categorical data, how to capture data in a spreadsheet, how to use descriptive and inferential statistics and, finally, gives advice on how to present the results in text, figures and tables. The article intends to help Master's level students with writing the data analysis section of their research proposal and presenting their results in their final research report. PMID:26245435

Optimum design and research on novel vehicle hybrid excitation synchronous generator

Directory of Open Access Journals (Sweden)

Liu Zhong-Shu

2017-01-01

Full Text Available Hybrid excitation is an organic combination of permanent magnet excitation and electric excitation. Hybrid excitation synchronous generator (HESG both has the advantages of light quality, less losses and high efficiency like permanent magnet generator and the advantages of good magnetic field adjusting performance like electric excitation generator, so it is very suitable for the vehicle application. This paper presented a novel vehicle HESG which has skew stator core, permanent magnet rotor and both armature winding and field winding in the stator. Using ANSYS software, simulating the electric excitation field and the magnetic field, and finally the main parameters of HESG were designed. The simulation and the test results both show that the novel vehicle PMSG has the advantages of small cogging torque, high efficiency, small harmonic component output voltage and low waveform aberration, so as to meet the design requirements fully.

Fiscal 2000 report on data of international joint demonstrative development of photovoltaic power generation system. Demonstrative research on photovoltaic power generation system interconnection system (Myanmar); 2000 nendo taiyoko hatsuden system kokusai kyodo jissho kaihatsu hokokusho. Taiyoko hatsuden keito renkei system jissho kenkyu (Myanmar) - shiryohen

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

This paper describes the fiscal 2000 report on research data of joint demonstrative development with Myanmar concerning photovoltaic power generation system interconnection system. The purpose is an operation research in the case where a small-scale electric power generation system in an remote island or the like in Japan is linked with a severely output-fluctuating power generation system using energy of nature such as photovoltaic and wind power generation. In particular, among the system control (demand side management) methods by adjustment from a loading side, ballast load control was employed that adjustably operates load of an ice machine for example. As the contents of the data, the quantity of solar radiation and wind velocity at the Chaungthar site were shown as meteorological observation data. In addition, a graph was made on the meteorological observation data at the Chaungthar and Letkhokekone sites. The paper also explains the final explanatory data for selecting the sites in implementing the demonstrative research. As to the operation method of the hybrid power generation system, assumption was made for the daytime load in four cases from 50% (30kW) to 0% (0kW) of the nighttime. Storage batteries and diesel generators were installed and used in combination. Simulation results were also presented. (NEDO)

KEEP Motivational Research: Strategy and Results. Technical Report #24.

Science.gov (United States)

Gallimore, Ronald; Tharp, Roland G.

This report briefly summarizes the motivation research strategy and results from the Kamehameha Early Education Program (KEEP). The rationale behind KEEP's use of on-task behavior to measure student motivation is discussed and the two strategies of motivation enhancement researched are described. These two strategies were: (1) staff training in…

Synthetic biology in mammalian cells: Next generation research tools and therapeutics

Science.gov (United States)

Lienert, Florian; Lohmueller, Jason J; Garg, Abhishek; Silver, Pamela A

2014-01-01

Recent progress in DNA manipulation and gene circuit engineering has greatly improved our ability to programme and probe mammalian cell behaviour. These advances have led to a new generation of synthetic biology research tools and potential therapeutic applications. Programmable DNA-binding domains and RNA regulators are leading to unprecedented control of gene expression and elucidation of gene function. Rebuilding complex biological circuits such as T cell receptor signalling in isolation from their natural context has deepened our understanding of network motifs and signalling pathways. Synthetic biology is also leading to innovative therapeutic interventions based on cell-based therapies, protein drugs, vaccines and gene therapies. PMID:24434884

Cell Phones: Current Research Results

Science.gov (United States)

... NAS Report - Identification of Research Needs Relating to Potential Biological or Adverse Health Effects of Wireless Communication Devices World Health Organization: Electromagnetic Fields and Public Health: Mobile Phones International Agency for Research on Cancer Press ...

Equality of opportunities for next generation researchers: bridging the gap between theory and practice in Eastern Europe

Science.gov (United States)

Žagar, Nedjeljka; Alkauskas, Audrius; Gyürky, György; Heiri, Oliver; Robinson, Nathaniel D.; Schäfer, Thomas

2016-04-01

Twenty-five years after the fall of the Berlin wall and the historical opening of the European Union to the countries of Central and Eastern Europe, there is still a striking difference in the success of European countries in attracting research funds and talented researchers. A number of indicators document the differences in research success and research opportunities between Eastern and Western European countries, and even between Northern and Southern Europe. Differences, as described for example by a number of secured ERC grants, apply to all research fields and to researchers at all stages of their careers. While statistical analysis document large gradients in research performance across the continent, the underlying issues that young researchers struggle with are common across Europe, although they impact research environment to a different extent. These issues are presently being discussed within Sci-Generation, a COST Targeted Network that aims to enhance the European research environment for the next generation of young researchers. The major goal of the network is to contribute ideas towards overcoming these differences in opportunities across Europe. Targeting researchers in the early stage of their independent carrier or in the transition to independence, Sci-Generation is devoted to inclusiveness in order to represent a diversity of issues in science policy in Europe. In particular, the network's Working Group 1 focuses on the countries of Eastern and Southern Europe with less success in attracting European research funding. Among other issues, we considered the involvement of young researchers in decision-making processes at all levels important in order to increase the systems' transparency. As shown by an ongoing study of how language affects the evaluation of research applications, the use of the local language serves, in some cases, as one of the last stands of "science-managing elites" that grew up in systems before 1990. We discuss how a lack

Research and development on university-collaboration type industrial and scientific technologies in fiscal 1999. Achievement report on research and development of the next generation ferroelectric thin film memory (research and development of the next generation ferroelectric memory); 1999 nendo jisedai kyoyudentai memory no kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

With an objective to realize the next generation ferroelectric memory, research and development has been carried out on quality improvement in ferroelectric thin films. This paper summarizes the achievements in fiscal 1999. In the search and research on new ferroelectric materials, discussions were given on such new materials as Bi{sub 3.25}La{sub 0.75}Ti{sub 3}O{sub 12} in addition to the conventional PLZT and SBT. In the research on film forming processes, the sol-gel method, the organic metal gaseous phase growth method and the sputtering method were used. In improving the quality of buffer layers, research was performed to use as a buffer layer the STA/SiON laminated structure in which silicon substrates were nitrided, and a film of SrTa{sub 2}O{sub 6} (STA) being a high ferroelectric material was formed. As a result of the research, a buffer layer having thin films with thickness of 3.7 to 4.8 nm as converted to SiO{sub 2} was obtained, wherein a leak current smaller than the tunnel current of the SiO{sub 2} film having the same thickness was shown. In the search for materials and research on film forming technologies to develop function separated type memory, such pure metals as Pt, Ir and Ru and their conductive oxides were used to evaluate properties as a floating gate electrode. (NEDO)

Incorrect results in software engineering experiments: How to improve research practices

OpenAIRE

Jørgensen, Magne; Dybå, Tore; Liestøl, Knut; Sjøberg, Dag

2016-01-01

Context The trustworthiness of research results is a growing concern in many empirical disciplines. Aim The goals of this paper are to assess how much the trustworthiness of results reported in software engineering experiments is affected by researcher and publication bias, given typical statistical power and significance levels, and to suggest improved research practices. Method First, we conducted a small-scale survey to document the presence of researcher and publication biases in software...

Generative Contexts: Generating value between community and educational settings

Directory of Open Access Journals (Sweden)

Dan Lyles

2016-12-01

Full Text Available As educators and researchers, the authors of this paper participated, at different points in time, in a National Science Foundation funded research program to place culturally responsive education into generative justice frameworks. We discovered that the mechanisms to create generative contexts—contexts where value can possibly be returned to the community where the people generating that value live and work—in-school, after-school, and not-school were not uniform and required individual attention and care. One can think of generative contexts as the educational preconditions for generative justice. We aim to show how generative contexts are crucial to understanding a larger theory of generative justice. To do this we provide three examples of generative contexts. First is a generative context in-school, where a technology teacher brought a community hairstylist into her classroom to help teach computer programming through cornrow braiding; a skill relevant to her African American students. Next is a generative context after-school where a student demonstrates soldering skills that she learned from family members. The third is a not-school “E-Waste to Makerspace” workshop where students created garden-technology designs for low-income communities. 

Long-term research in Japan: amorphous metals, metal oxide varistors, high-power semiconductors and superconducting generators

Energy Technology Data Exchange (ETDEWEB)

Hane, G.J.; Yorozu, M.; Sogabe, T.; Suzuki, S.

1985-04-01

The review revealed that significant activity is under way in the research of amorphous metals, but that little fundamental work is being pursued on metal oxide varistors and high-power semiconductors. Also, the investigation of long-term research program plans for superconducting generators reveals that activity is at a low level, pending the recommendations of a study currently being conducted through Japan's Central Electric Power Council.

Report on results in research and development 1989

International Nuclear Information System (INIS)

1990-01-01

This presentation of results of R and D work represents for the Karlsruhe Nuclear Research Centre its scientific annual report for the year 1989, as required by its constitution. The report is divided according to the main areas of work of the KfK in a similar manner to the R and D planning. The individual reports were prepared by the participating institutes and main departments and were then grouped thematically with a note of their origins. The main areas of work are the Fast Breeder Project, the separation nozzle method, the Nuclear Fusion Project, the Reprocessing and Waste Treatment Project, terminal storage, environment and safety solids and matter research, nuclear and particle physics, microtechnology, handling and other research plans (for example, the Advanced Pressurized Water Reactor). This report shows the progress of studies on each project named in the KfK R and D programme. The correlation to the R and D programme is meant to facilitate the comparison of aims with achievements and explain the complete context of what are often individual tasks carried out by several institutes. Detailed results can be found in the quoted scientific-technical publications on internal preliminary reports. (orig./HK) [de

Cue generation and memory construction in direct and generative autobiographical memory retrieval.

Science.gov (United States)

Harris, Celia B; O'Connor, Akira R; Sutton, John

2015-05-01

Theories of autobiographical memory emphasise effortful, generative search processes in memory retrieval. However recent research suggests that memories are often retrieved directly, without effortful search. We investigated whether direct and generative retrieval differed in the characteristics of memories recalled, or only in terms of retrieval latency. Participants recalled autobiographical memories in response to cue words. For each memory, they reported whether it was retrieved directly or generatively, rated its visuo-spatial perspective, and judged its accompanying recollective experience. Our results indicated that direct retrieval was commonly reported and was faster than generative retrieval, replicating recent findings. The characteristics of directly retrieved memories differed from generatively retrieved memories: directly retrieved memories had higher field perspective ratings and lower observer perspective ratings. However, retrieval mode did not influence recollective experience. We discuss our findings in terms of cue generation and content construction, and the implication for reconstructive models of autobiographical memory. Copyright © 2015 Elsevier Inc. All rights reserved.

Modeling and Simulation of U-tube Steam Generator

Science.gov (United States)

Zhang, Mingming; Fu, Zhongguang; Li, Jinyao; Wang, Mingfei

2018-03-01

The U-tube natural circulation steam generator was mainly researched with modeling and simulation in this article. The research is based on simuworks system simulation software platform. By analyzing the structural characteristics and the operating principle of U-tube steam generator, there are 14 control volumes in the model, including primary side, secondary side, down channel and steam plenum, etc. The model depends completely on conservation laws, and it is applied to make some simulation tests. The results show that the model is capable of simulating properly the dynamic response of U-tube steam generator.

Steam generator replacement at Bruce A: approach, results, and lessons learned

International Nuclear Information System (INIS)

Tomkiewicz, W.; Savage, B.; Smith, J.

2008-01-01

Steam Generator Replacement is now complete in Bruce A Units 1 and 2. In each reactor, eight steam generators were replaced; these were the first CANDU steam generator replacements performed anywhere in the world. The plans for replacement were developed in 2004 and 2005, and were summarized in an earlier paper for the CNS Conference held in November, 2006. The present paper briefly summarizes the methodologies and special processes used such as metrology, cutting and welding and heavy lifting. The paper provides an update since the earlier report and focuses on the project achievements to date, such as: - A combination of engineered methodology, laser metrology and precise remote machining led to accurate first time fit-ups of each new replacement steam generator and steam drums - Lessons learned in the first unit led to schedule improvements in the second unit - Dose received was lowest recorded for any steam generator replacement project. The experience gained and lessons learned from Units 1 and 2 will be valuable in planning and executing future replacement steam generator projects. A video was presented

Identification of translational dermatology research priorities in the U.K.: results of an electronic Delphi exercise.

Science.gov (United States)

Healy, E; Brown, S J; Langan, S M; Nicholls, S G; Shams, K; Reynolds, N J

2015-11-01

Translational research is the direct application of basic and applied research to patient care. It is estimated that there are at least 2000 different skin diseases; thus, there are considerable challenges in seeking to undertake research on each of these disorders. This electronic Delphi (e-Delphi) exercise was conducted in order to generate a list of translational dermatology research questions that are regarded as a priority for further investigations. During the first phase of the e-Delphi exercise, 228 research questions were generated by an expert panel that included clinical academic dermatologists, clinical dermatologists, nonclinical scientists, dermatology trainees and representatives from patient support groups. Following completion of the second and third phases, 40 questions on inflammatory skin disease, 20 questions on structural skin disorders/genodermatoses, 37 questions on skin cancer and eight miscellaneous questions were designated as priority translational dermatology research questions (PRQs). In addition to PRQs on a variety of disease areas (including multiple PRQs on psoriasis, eczema, squamous cell carcinoma and melanoma), there were a number of cross-cutting themes that identified a need to investigate mechanisms/pathogenesis of disease and the necessity to improve treatments for patients with skin disease. It is predicted that this list of PRQs will help to provide a strategic direction for translational dermatology research in the U.K. and that addressing this list of questions will ultimately provide clinical benefit for substantial numbers of patients with skin disorders. © 2015 British Association of Dermatologists.

Euratom research and training in generation IV systems with emphasis on V/HTR

International Nuclear Information System (INIS)

Goethem, G. van; Manolatos, P.; Fuetterer, M.

2006-01-01

In this overview paper, the following questions are addressed: (1) What are the challenges facing the European Union nuclear fission research community in the short (today), medium (2010) and long term (2040)? (2) What kind of research and technological development (RTD) does Euratom offer to respond to these challenges, in particular in the area of reactor systems and fuel cycles? In the general debate about energy supply technologies there are challenges of both a scientific and technological (S/T) as well as an economic and political (E/P) nature. Though the Community research programme acts mainly on the former, there is nevertheless important links with Community policy. These not only exist in the specific area of nuclear policy. It is shown in the particular area of nuclear fission, to what extent Euratom research, education and innovation ('Knowledge Triangle: Education, Research, and Innovation') respond to the S/T challenges: (1) sustainability, (2) economics, (3) safety, and (4) proliferation resistance. At the European Commission (EC), the research related to nuclear reactor systems and fuel cycles is principally under the responsibility of the 2 Directorates Generals (DG) DG Research (RTD, located in Brussels), which implements and manages the programme of 'indirect actions', and the DG Joint Research Centre (JRC, headquarters in Brussels and 7 scientific institutes in 5 Member States) which carries out 'direct actions' in their own laboratories. In this HTR-2006 introductory paper, the emphasis is on the indirect and direct actions of the 6 th Euratom research framework programme 2003-2006, FP-6, with special emphasis on V/HTR Generation IV research. (orig.)

Research on a family of n-scroll chaos generators

International Nuclear Information System (INIS)

Zhang, G; Yang, S-Z; He, L-F

2008-01-01

This paper studies a family of n-scroll chaos generators using a modified Chua's circuit. A mathematic model of the generators is established, the relationship between equilibrium points and scrolls is also analyzed, and a general theorem for generation of n-scroll chaos attractors is given. Numerical simulation is illustrated, showing excellent agreement with our theoretical predictions

FY 1998 report on the results of the project on the next generation structure housing development; 1998 nendo jisedai kozo jutaku kaihatsu jigyo seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The purpose of this project is to develop/verify technology to design/construct a structural body of multiple dwelling house which is highly durable and usable at maximum of the limited space with no projections of poles/beams, and is also to develop/verify a composite system of a structure and each house in which residential space can freely be changed horizontally/vertically in response to the leveling-up of living and changes in life style. The following were conducted: construction of an experimental house group with next generation structure; development of technology of effective space utilization/high durability body construction; development of technology of structural analysis/design systematization of antiseismic/damping system; development of commercialization of technology to heighten frame durability, development of technology to heighten durability of finishing materials of a body; development of low cost construction technology; development of technology of interface between a body and each house; verification of housing performance using a next generation body system; generalization of next generation frame system/house system. To reflect the results of the research quickly, the details of the research are systematized, and a draft is worked out of a guide for constructing the next generation frame system/house system which were arranged between the current architecture related laws and business as a general multiple dwelling house. (NEDO)

Analysis and identification of gaps in the research for the production of second-generation liquid transportation biofuels

International Nuclear Information System (INIS)

Schwietzke, S.; Ladisch, M.; Russo, L.; Kwant, K.; Maekinen, T.; Kavalov, B.; Maniatis, K.; Zwart, R.; Shahanan, G.; Sipila, K.; Grabowski, P.; Telenius, B.; White, M.

2008-08-01

Research gaps were found in cellulosic ethanol, Fischer-Tropsch liquids and green diesel, dimethyl ether and P-Series fuels. Lignocellulosic ethanol is derived from pre-treatment, hydrolysis, and fermentation of the resulting sugars from cellulosic sources such as wood chips, agricultural residues, and grasses. Green diesel is a high boiling component, not derived from vegetable oil, obtained either from Fischer-Tropsch synthesis or through pyrolysis of biomass. Dimethyl ether has potential as a high quality fuel for diesel engines and is produced by converting syngas into methanol followed by dehydration of methanol to dimethyl ether. P-Series fuel is a mixture of ethanol, methyltetrahydrofuran, pentanes and higher alkanes, and butane. Methyltetrahydrofuran may be produced from dehydration of pentose and glucose sugars to form furfural and levulinic acid respectively, which when hydrogenated result in methyltetrahydrofuran. Common denominators in gaps for these different fuels and the biochemical or thermochemical processes used to produce them are given by three main areas. These are: catalysts and biocatalysts; feedstock preparation and bioprocessing; and systems integration. In the biocatalyst (or catalyst) area research is needed to achieve more robust, versatile, and cost-effective catalysts. The catalytic systems must be less subject to inhibition and more stable in the presence of chemically complex feedstocks derived from biomass materials. With bioprocessing, the gaps lie in economic enzyme production, reduction of enzyme inhibition, development of pentose utilising and cellulase producing micro-organisms, feedstock preparation (pre-treatment), and inhibitor removal. For thermochemical systems, the list is analogous except the term 'catalyst' replaces 'enzyme' or 'microorganism'. Gaps were identified in feedstock preparation, with this term being broadly defined. Feedstocks are defined as biomass materials entering the process, as well as gases derived

Will the Playstation generation become better endoscopic surgeons?

NARCIS (Netherlands)

van Dongen, Koen W.; Verleisdonk, Egbert-Jan M. M.; Schijven, Marlies P.; Broeders, Ivo A. M. J.

2011-01-01

A frequently heard comment is that the current "Playstation generation" will have superior baseline psychomotor skills. However, research has provided inconsistent results on this matter. The purpose of this study was to investigate whether the "Playstation generation" shows superior baseline

Design and results of testing the SHF-generator magnetic system of the T-15 device

International Nuclear Information System (INIS)

Borisov, V.D.; Koretskij, A.Yu.; Kostenko, A.I.; Monoszon, N.A.; Ostroumov, Yu.N.; Suvorov, M.M.; Trokhachev, G.V.; Churakov, G.F.; Shmal'ko, G.I.; Yakubovskij, V.G.

1984-01-01

Design and engineering solutions accepted in the development of the 5T superconducting solenoid of the auxillary heating SHF-generator for the T-15 tokamak are presented. A superconducting coil generates an axially symmetric field with a definite distribution along the SHF-generator gyrocon axis. Limited sizes, high accuracy of coincidence of geometric and magnetic axes, and possibility of operation with different gyrocons are the main peculiarities of the developed cryostat. The required magnetic field of 5T was attained after some training. Heat input at 4.5 K corresponds to the rated value of 2.5 W. Test results for solenoid functional models are presented

Results of the secondary side chemical cleaning of the steam generators

International Nuclear Information System (INIS)

Doma, A.; Patek, G.

2001-01-01

A significant amount of deposit has developed on the secondary side of the heat transfer tubes of the steam generators (SG) of the Paks Nuclear Power Plant units in course of the years. More than 99.5% of the deposit is made up of magnetite (Fe 3 O 4 ) generated in the secondary circuit of the power plant. Those deposits lead to the decrease of the heat transfer. Even more important is its role from the point of view of operational reliability of the steam generators, leak tightness between the primary and secondary sides. The first series of cleaning took place following 8-9 years of operation of the units. Following the first cleaning cycle the transport of the corrosion products into the steam generators did not change, and thus obviously new cleaning was required. Periodical cleaning of the steam generators shall be assured. (R.P.)

IAEA activities on steam generator life management

International Nuclear Information System (INIS)

Gueorguiev, B.; Lyssakov, V.; Trampus, P.

2002-01-01

The International Atomic Energy Agency (IAEA) carries out a set of activities in the field of Nuclear Power Plant (NPP) life management. Main activities within this area are implemented through the Technical Working Group on Life Management of NPPs, and mostly concentrated on studies of understanding mechanisms of degradation and their monitoring, optimisation of maintenance management, economic aspects, proven practices of and approaches to plant life management including decommissioning. The paper covers two ongoing activities related to steam generator life management: the International Database on NPP Steam Generators and the Co-ordinated Research Project on Verification of WWER Steam Generator Tube Integrity (WWER is the Russian designed PWR). The lifetime assessment of main components relies on an ability to assess their condition and predict future degradation trends, which to a large extent is dependent on the availability of relevant data. Effective management of ageing and degradation processes requires a large amount of data. Several years ago the IAEA started to work on the International Database on NPP Life Management. This is a multi-module database consisting of modules such as reactor pressure vessels materials, piping, steam generators, and concrete structures. At present the work on pressure vessel materials, on piping as well as on steam generator is completed. The paper will present the concept and structure of the steam generator module of the database. In countries operating WWER NPPs, there are big differences in the eddy current inspection strategy and practice as well as in the approach to steam generator heat exchanger tube structural integrity assessment. Responding to the need for a co-ordinated research to compare eddy current testing results with destructive testing using pulled out tubes from WWER steam generators, the IAEA launched this project. The main objectives of the project are to summarise the operating experiences of WWER

Leveraging multi-generational workforce values in interactive information societies

Directory of Open Access Journals (Sweden)

Sophie van der Walt

2010-11-01

Objectives: This article advocates the need for generational awareness and addresses how this awareness presents benefits to companies, such as, increased productivity, improved succession planning policies and strategies to recruit and retain a diverse workforce. The research problem is directed at how diversity management influences Traditionalists, Baby Boomers, Generation X and Generation Y in terms of their work performance and co-worker relationships. Method: The research design combines Critical Theory and Generational Theory within the mixed-method paradigm. The sequential exploratory design was decided upon as it studies the unknown relationships between different generations of employees. The literature review was followed by a quantitative empirical research component and data was collected by means of a questionnaire. Results: The findings highlight specific differences between generations regarding their perspectives on work values and co-worker relationships, rewards, work-life balance and retirement. Conclusion: The article concludes with recommendations on the role diversity management plays in terms of work performance and co-worker relationships. By leveraging generational awareness in the interactive information society organizations with a multi-generational workforce will succeed in the competitive business environment.

Fiscal 1974 Sunshine Project result report. Research on solar energy utilization systems (photovoltaic power generation); Taiyo energy riyo system chosa kenkyu seika hokokusho. Taiyoko hatsuden

Energy Technology Data Exchange (ETDEWEB)

NONE

1975-03-01

This report summarizes the research result on the guide for developing solar cells. The report includes (1) standard measurement method for solar cells, (2) system configuration and installation site, (3) optimum design and profitability of solar cells and (4) raw materials and pollution prevention. In the 1st research, study was made on the standard for solar radiation intensity, the definition and measurement methods for spectral profiles, and the measurement conditions for solar cells. In the 2nd research, study was made on various basic data for the scale of photovoltaic power systems. In the 3rd research, since it is necessary to obtain characteristics of solar cells with any profiles of physical constants such as impurity, minority carrier life and mobility by simulation of solar cell actions, research was made on the measurement method of minority carrier lives by using a prepared computer program. Technical and economical comparisons were also made between Si solar cells with various structures. In the 4th research, survey was made on various data for compound semiconductors, and study was made on industrial waste pollution. (NEDO)

Report of the research results with University of Tokyo, Nuclear Engineering Research Laboratory's Facilities in fiscal 1989

International Nuclear Information System (INIS)

1990-01-01

This is the report of the results of research carried out by the common utilization of the reactor 'Yayoi' and an electron accelerator in the Nuclear Engineering Research Laboratory in fiscal year 1989. In fiscal year 1989, the research themes using the reactor Yayoi or related to it were 15, and those using the linear accelerator reached 12, thus the common utilization attracted the strong interest of users. The Yayoi has been operated satisfactorily without trouble. The results of the research carried out by the common utilization of the Yayoi and a linac and the reports of 12 Yayoi research meetings in fiscal year 1989 are collected. (J.P.N.)

Results of the Community Health Applied Research Network (CHARN) National Research Capacity Survey of Community Health Centers.

Science.gov (United States)

Song, Hui; Li, Vivian; Gillespie, Suzanne; Laws, Reesa; Massimino, Stefan; Nelson, Christine; Singal, Robbie; Wagaw, Fikirte; Jester, Michelle; Weir, Rosy Chang

2015-01-01

The mission of the Community Health Applied Research Network (CHARN) is to build capacity to carry out Patient-Centered Outcomes Research at community health centers (CHCs), with the ultimate goal to improve health care for vulnerable populations. The CHARN Needs Assessment Staff Survey investigates CHCs' involvement in research, as well as their need for research training and resources. Results will be used to guide future training. The survey was developed and implemented in partnership with CHARN CHCs. Data were collected across CHARN CHCs. Data analysis and reports were conducted by the CHARN data coordinating center (DCC). Survey results highlighted gaps in staff research training, and these gaps varied by staff role. There is considerable variation in research involvement, partnerships, and focus both within and across CHCs. Development of training programs to increase research capacity should be tailored to address the specific needs and roles of staff involved in research.

Current status of NPP generation IV

International Nuclear Information System (INIS)

Yohanes Dwi Anggoro; Dharu Dewi; Nurlaila; Arief Tris Yuliyanto

2013-01-01

Today development of nuclear technology has reached the stage of research and development of Generation IV nuclear power plants (advanced reactor systems) which is an innovative development from the previous generation of nuclear power plants. There are six types of power generation IV reactors, namely: Very High Temperature Reactor (VHTR), Sodium-cooled Fast Reactor (SFR), Gas-cooled Fast Reactor (GFR), Lead-cooled Fast Reactor (LFR), Molten Salt Reactor (MSR), and Super Critical Water-cooled Reactor (SCWR). The purpose of this study is to know the development of Generation IV nuclear power plants that have been done by the thirteen countries that are members of the Gen IV International Forum (GIF). The method used is review study and refers to various studies related to the current status of research and development of generation IV nuclear power. The result of this study showed that the systems and technology on Generation IV nuclear power plants offer significant advances in sustainability, safety and reliability, economics, and proliferation resistance and physical protection. In addition, based on the research and development experience is estimated that: SFR can be used optimally in 2015, VHTR in 2020, while NPP types GFR, LFR, MSR, and SCWR in 2025. Utilization of NPP generation IV said to be optimal if fulfill the goal of NPP generation IV, such as: capable to generate energy sustainability and promote long-term availability of nuclear fuel, minimize nuclear waste and reduce the long term stewardship burden, has an advantage in the field of safety and reliability compared to the previous generation of NPP and VHTR technology have a good prospects in Indonesia. (author)

Pressurized Fluidized Bed Combustion Second-Generation System Research and Development

Energy Technology Data Exchange (ETDEWEB)

A. Robertson; D. Horazak; R. Newby; H. Goldstein

2002-11-01

Research is being conducted under United States Department of Energy (DOE) Contract DE-AC21-86MC21023 to develop a new type of coal-fired plant for electric power generation. This new type of plant--called a Second-Generation or Advanced Pressurized Circulating Fluidized Bed Combustion (APCFB) plant--offers the promise of efficiencies greater than 45% (HHV), with both emissions and a cost of electricity that are significantly lower than conventional pulverized-coal-fired plants with scrubbers. The APCFB plant incorporates the partial gasification of coal in a carbonizer, the combustion of carbonizer char in a pressurized circulating fluidized bed boiler (PCFB), and the combustion of carbonizer syngas in a topping combustor to achieve gas turbine inlet temperatures of 2300 F and higher. A conceptual design was previously prepared for this new type of plant and an economic analysis presented, all based on the use of a Siemens Westinghouse W501F gas turbine with projected carbonizer, PCFB, and topping combustor performance data. Having tested these components at the pilot plant stage, the referenced conceptual design is being updated to reflect more accurate performance predictions together with the use of the more advanced Siemens Westinghouse W501G gas turbine and a conventional 2400 psig/1050 F/1050 F/2-1/2 in. steam turbine. This report describes the updated plant which is projected to have an HHV efficiency of 48% and identifies work completed for the October 2001 through September 2002 time period.

Conscience of Japanese on nuclear power generation

International Nuclear Information System (INIS)

Hayashi, Chikio

1995-01-01

There are considerably many investigations and researches on the attitude of general public to nuclear power generation, but those which analyzed the contents of attitude or the research which got into the problem of what method is desirable to obtain the understanding of nuclear power generation for power generation side is rarely found. Therefore, the research on where is its cause was begun. As the result, since the attitude to nuclear power generation is related to the attitudes to many things that surround nuclear power generation in addition to that directly to nuclear power generation, it is necessary to elucidate the problem synthetically. The social investigation was carried out for the public of from 18 to 79 years old who live in the supply area of Kansai Electric Power Co., Inc. The data were obtained from those selected by probabilistic sampling, 1000 in urban area (rate of recovery 76%) and 440 in country area (rate of recovery 77%). The way of thinking on making questionnaire is shown. The investigation and the analysis of the obtained data were carried out. What do you recollect as a dangerous matter, the attitude to nuclear power generation, the structure of the conscience to nuclear power generation and its significance, the type classification of people and its features are reported and discussed. (K.I.)

The challenges of commercializing second-generation transgenic crop traits necessitate the development of international public sector research infrastructure.

Science.gov (United States)

Rothstein, Steven J; Bi, Yong-Mei; Coneva, Viktoriya; Han, Mei; Good, Allen

2014-10-01

It has been 30 years since the first transformation of a gene into a plant species, and since that time a number of biotechnology products have been developed, with the most important being insect- and herbicide-resistant crops. The development of second-generation products, including nutrient use efficiency and tolerance to important environmental stressors such as drought, has, up to this time, been less successful. This is in part due to the inherent complexities of these traits and in part due to limitations in research infrastructure necessary for public sector researchers to test their best ideas. Here we discuss lessons from previous work in the generation of the first-generation traits, as well as work from our labs and others on identifying genes for nitrogen use efficiency. We then describe some of the issues that have impeded rapid progress in this area. Finally, we propose the type of public sector organization that we feel is necessary to make advances in important second-generation traits such as nitrogen use efficiency. © The Author 2014. Published by Oxford University Press on behalf of the Society for Experimental Biology. All rights reserved. For permissions, please email: journals.permissions@oup.com.

A Review of the Empirical Generations at Work Research: Implications for School Leaders and Future Research

Science.gov (United States)

Edge, Karen

2014-01-01

Most schools currently employ three generations of teachers and leaders: Baby Boomers (1946-65), Generation X (1966-80) and Generation Y (1981-2003). However, the implications for school leaders of multi-generational schools remain relatively unexplored. This paper examines the empirical multi-disciplinary generations at work evidence to identify…

Method of processing results of tests of heating surfaces of a steam generator on a digital computer

Energy Technology Data Exchange (ETDEWEB)

Glusker, B.N.

1975-03-01

At present, processing of information obtained by testing steam generators in high-capacity generating units is carried out manually. This takes a long time and does not always permit one to process all the information obtained, which impoverishes the results of experimental work. In addition, this kind of processing of experimental results is as a rule done after completion of a considerable part of the tests, and occasionally after completion of all the tests. In this case, it is impossible to conduct a better directed, corrected experiment, and this leads to duplication of experiments and to increasing the period of adjusting and exploratory work on industrial plants. An algorithm was developed for automated processing of the hydraulic and temperature conditions of the heating surfaces in steam generators on digital computers, which is a part of the general algorithm of processing of results of thermal tests of steam generators. It includes calculation of all characteristics determining the thermal and hydraulic conditions of the heating surfaces. The program of processing includes a subprogram: determination of the thermophysical and thermodynamic properties of the water and steam.

Report of the research results with University of Tokyo Nuclear Engineering Research Laboratory's facilities in fiscal 1975

International Nuclear Information System (INIS)

1976-08-01

Results of the research works by educational institutions using fast neutron source reactor 'Yayoi' etc. of Nuclear Engineering Research Laboratory in fiscal 1975 are reported in individual summaries. Fields of research are the following: shielding benchmark experiment, research on medical irradiation, irradiation experiments, experiments by small research groups, fast neutron streaming experiment, and so on. (Mori, K.)

GENERATION Z AND ITS PERCEPTION OF WORK

Directory of Open Access Journals (Sweden)

Maria-Cristina IORGULESCU

2016-06-01

Full Text Available One of the major demograhic phenomenon registered in the present times is represented by the aging of the Romanian population and, consequently, of the workforce, this issue having several implications for the human resource management in organizations. As generation Z prepares to enter the labor market, managers will be facing a set of generational differences between their employees. As a result, the paper presents the characteristics of generation Z, as highlighted by recent studies. Moreover, the paper presents the results of a survey based on a questionnaire adressed to university students, members of generation Z. The results of the study highlight generation Z perception of the ideal workplace and working conditions, the main priorities in selecting a job and its career expectations and aspirations. The implications of the study, as well as future research directions are discussed.

FY 1977 Annual report on Sunshine Project results. Research and development of photovoltaic power generation systems (Research and development of particle nonacceleration growth type silicon thin-film crystals); 1977 nendo taiyoko hatsuden system no kenkyu kaihatsu seika hokokusho. Ryushi hikasoku seichogata silicon usumaku kessho no kenkyu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1978-03-01

As part of the research and development project for producing photovoltaic power generation systems at reduced cost, the R and D efforts are made for producing particle nonacceleration growth type silicon thin-film crystals. The research items are (1) research on thin-film crystals, and (2) research on cell-structuring method. The item (1) studies quantities, types and electrical properties of impurities and crystal defects in the polycrystalline ingots, produced by the Czochralski method from metal grade silicon and purified metal grade silicon stocks. Next, the substrate prepared above is coated with a thin film of silicon by the vapor-phase growth method with dichlorosilane as the source, to evaluate the thin-film crystals by measuring the crystal defects and lifetime of small numbers of carriers. The item (2) studies the effects of the solder dipping method. In addition, unevenness of photoelectric current is analyzed by a laser scanning microscope, to investigate the effects of the secondary impurities and crystal defects in the substrate crystals on photoelectric current. As a result, it is found that conversion efficiency is improved by grading the hole concentration in the p-type activated layer. The targets of 10 to 20 m{sup 2} as the area and 7 to 8% as the conversion efficiency are attained by preparing the crystals again. (NEDO)

Main research results in the field of nuclear power engineering of the Nuclear Reactors and Thermal Physics Institute in 2014

International Nuclear Information System (INIS)

Trufanov, A.A.; Orlov, Yu.I.; Sorokin, A.P.; Chernonog, V.L.

2015-01-01

The main results of scientific and technological activities for last years of the Nuclear Reactors and Thermal Physics Institute FSUE SSC RF - IPPE in solving problems of nuclear power engineering are presented. The work have been carried out on the following problems: justification of research and development solutions and safety of NPPs with fast reactors of new generation with sodium (BN-1200, MBIR) and lead (BREST-OD-300) coolants, justification of safety of operating and advanced NPPs with WWER reactor facilities (WWER-1000, AEhS 2006, WWER-TOI), development and benchmarking of computational codes, research and development support of Beloyarsk-3 (BN-600) and Bilibino (BN-800) NPPs operation, decommissioning of AM and BR-10 research reactors, pilot scientific studies (WWER-SKD, ITER), international scientific and technical cooperation. Problems for further investigations are charted [ru

Summary of results from sodium-heated steam generator test program

Energy Technology Data Exchange (ETDEWEB)

McDonald, J S

1975-07-01

A 28 MWt sodium-heated steam generator test unit developed and fabricated by Atomics International was operated in the Sodium Component Test Installation. The SCTI is located at the Liquid Metal Engineering Center which is operated for the Atomic Energy Commission by Atomics International, Reviewed in this paper are the results of the test operations and the findings of the post-test examination of the module. Testing was performed to assure the mechanical integrity of the unit over a wide range of simulated plant operating conditions and to develop a variety of performance data. Specific tests conducted included preheat, vibration, startup-shutdown, pressurization, steady state and parametric performance mapping, endurance, simulated leak injection, low- flow stability and simulated plant transients. (author)

Reward preferences for generations in selected Information and Communication Technology companies

Directory of Open Access Journals (Sweden)

Annetjie Moore

2012-01-01

Full Text Available Orientation: Previous research suggests that different generations have different reward preferences based on differences in values, frames of reference and life goals. Research purpose: The focus of this study was to determine whether different generations prefer different rewards in the Information and Communication Technology (ICT industry in South Africa.Motivation for the study: The rationale for this study was to obtain a better understanding of the reward preferences of Veterans, Baby Boomers, Generation X and Generation Y in the ICT industry.Research design, approach and method: The research was a quantitative, cross-sectional, correlational design. Participants from two ICT companies completed a structured electronic survey. One hundred and sixty four valid responses were received. A Cronbach’s alpha of 0.821 indicates that the survey was reliable.Main findings: Contrary to previous research, the results show that generations do not display different reward preferences.Practical/managerial implications: It would be more beneficial to use individual interrelationship factors to develop a reward strategy than generations.Contribution/value-add: The research has added insight and value to reward preferences for generations in the ICT sector.

Reward preferences for generations in selected Information and Communication Technology companies

Directory of Open Access Journals (Sweden)

Annetjie Moore

2012-09-01

Full Text Available Orientation: Previous research suggests that different generations have different reward preferences based on differences in values, frames of reference and life goals. Research purpose: The focus of this study was to determine whether different generations prefer different rewards in the Information and Communication Technology (ICT industry in South Africa. Motivation for the study: The rationale for this study was to obtain a better understanding of the reward preferences of Veterans, Baby Boomers, Generation X and Generation Y in the ICT industry. Research design, approach and method: The research was a quantitative, cross-sectional, correlational design. Participants from two ICT companies completed a structured electronic survey. One hundred and sixty four valid responses were received. A Cronbach’s alpha of 0.821 indicates that the survey was reliable. Main findings: Contrary to previous research, the results show that generations do not display different reward preferences. Practical/managerial implications: It would be more beneficial to use individual interrelationship factors to develop a reward strategy than generations. Contribution/value-add: The research has added insight and value to reward preferences for generations in the ICT sector.

Search Results | Page 34 | IDRC - International Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

Results 331 - 340 of 439 ... ... INCOME GENERATION 10 Apply INCOME GENERATION filter ... Women's Economic Rights and Entitlement on Separation and Divorce (India) ... But, there still exists a considerable gap in innovation capability between ... Asia-Pacific Research and Training Network on Trade (ARTNET) - Phase II.

Development of a Portable Fusion Neutron Generator

Energy Technology Data Exchange (ETDEWEB)

Oh, Byung-Hoon; In, Sang-Ryul; Jin, Jeong-Tae; Chang, Dae-Sik; Jang, Doh-Yun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Lee, Cheol Ho [Hanyang Univ., Seoul (Korea, Republic of)

2015-05-15

For this purpose commercial ones, fast neutron yield from 10{sup 7} to 10{sup 11}, are supplied by several companies and research groups around the world. But internally the following limits make it difficult to develop the related application systems by domestic companies and/or research groups. - Limited life time - High price - Frequent trouble Not only to remove these limits but also to find out new internal application fields, it is necessary to develop our own domestic neutron generators. With the related technologies earned during fusion related researches, we did start to develop movable neutron generators from small one to big one, which could cover different fusion neutron yields. In this presentation the design and initial experimental results on the developed small neutron generator with a final target of 10{sup 8} n/s of 14 MeV neutrons, will be summarized.

Biomolecule Sequencer: Next-Generation DNA Sequencing Technology for In-Flight Environmental Monitoring, Research, and Beyond

Science.gov (United States)

Smith, David J.; Burton, Aaron; Castro-Wallace, Sarah; John, Kristen; Stahl, Sarah E.; Dworkin, Jason Peter; Lupisella, Mark L.

2016-01-01

On the International Space Station (ISS), technologies capable of rapid microbial identification and disease diagnostics are not currently available. NASA still relies upon sample return for comprehensive, molecular-based sample characterization. Next-generation DNA sequencing is a powerful approach for identifying microorganisms in air, water, and surfaces onboard spacecraft. The Biomolecule Sequencer payload, manifested to SpaceX-9 and scheduled on the Increment 4748 research plan (June 2016), will assess the functionality of a commercially-available next-generation DNA sequencer in the microgravity environment of ISS. The MinION device from Oxford Nanopore Technologies (Oxford, UK) measures picoamp changes in electrical current dependent on nucleotide sequences of the DNA strand migrating through nanopores in the system. The hardware is exceptionally small (9.5 x 3.2 x 1.6 cm), lightweight (120 grams), and powered only by a USB connection. For the ISS technology demonstration, the Biomolecule Sequencer will be powered by a Microsoft Surface Pro3. Ground-prepared samples containing lambda bacteriophage, Escherichia coli, and mouse genomic DNA, will be launched and stored frozen on the ISS until experiment initiation. Immediately prior to sequencing, a crew member will collect and thaw frozen DNA samples, connect the sequencer to the Surface Pro3, inject thawed samples into a MinION flow cell, and initiate sequencing. At the completion of the sequencing run, data will be downlinked for ground analysis. Identical, synchronous ground controls will be used for data comparisons to determine sequencer functionality, run-time sequence, current dynamics, and overall accuracy. We will present our latest results from the ISS flight experiment the first time DNA has ever been sequenced in space and discuss the many potential applications of the Biomolecule Sequencer for environmental monitoring, medical diagnostics, higher fidelity and more adaptable Space Biology Human

Knowledge generation about care-giving in the UK: a critical review of research paradigms.

Science.gov (United States)

Milne, Alisoun; Larkin, Mary

2015-01-01

While discourse about care and caring is well developed in the UK, the nature of knowledge generation about care and the research paradigms that underpin it have been subjected to limited critical reflection and analysis. An overarching synthesis of evidence - intended to promote debate and facilitate new understandings - identifies two largely separate bodies of carer-related research. The first body of work - referred to as Gathering and Evaluating - provides evidence of the extent of care-giving, who provides care to whom and with what impact; it also focuses on evaluating policy and service efficacy. This type of research tends to dominate public perception about caring, influences the type and extent of policy and support for carers and attracts funding from policy and health-related sources. However, it also tends to be conceptually and theoretically narrow, has limited engagement with carers' perspectives and adopts an atomistic purview on the care-giving landscape. The second body of work - Conceptualising and Theorising - explores the conceptual and experiential nature of care and aims to extend thinking and theory about caring. It is concerned with promoting understanding of care as an integral part of human relationships, embedded in the life course, and a product of interdependence and reciprocity. This work conceptualises care as both an activity and a disposition and foregrounds the development of an 'ethic of care', thereby providing a perspective within which to recognise both the challenges care-giving may present and the significance of care as a normative activity. It tends to be funded from social science sources and, while strong in capturing carers' experiences, has limited policy and service-related purchase. Much could be gained for citizens, carers and families, and the generation of knowledge advanced, if the two bodies of research were integrated to a greater degree. © 2014 John Wiley & Sons Ltd.

Next Generation Nuclear Plant Materials Research and Development Program Plan, Revision 3

International Nuclear Information System (INIS)

G.O. Hayner; R.L. Bratton; R.E. Mizia; W.E. Windes; W.R. Corwin; T.D. Burchell; C.E. Duty; Y. Katoh; J.W. Klett; T.E. McGreevy; R.K. Nanstad; W. Ren; P.L. Rittenhouse; L.L. Snead; R.W. Swindeman; D.F. Wlson

2006-01-01

This is the 2006 update (Revision 3) of the NGNP Materials Research and Development Program Plan. This law established that the U.S Department of Energy (DOE) Secretary of Energy shall establish a ''Next Generation Nuclear Plant'' (NGNP) project. The NGNP project named in the Act was given the following attributes and guiding principles to manage its development: (1) The NGNP consists of research, development, design (R and DD), construction, and operation of a prototype reactor to generate electricity and hydrogen; (2) The project shall be managed by the DOE Office of Nuclear Energy; (3) The Idaho National Laboratory (INL) shall be the lead DOE laboratory for the NGNP; (4) The INL shall establish collaborations with selected institutions of higher education, other research institutes and international researchers; (5) The INL shall organize an industrial consortium of partners for cost-shared R and DD, construction; (6) The project shall be sited at the INL; (7) The project shall be licensed by the Nuclear Regulatory Commission (NRC) and by July, 2008 the NRC and DOE shall jointly submit a licensing strategy to Congress; (8) The project shall be organized to maximize technical interchange with the nuclear power industry, nuclear power plant construction firms, the chemical process industry and to seek international cooperation, participation and contributions; (9) The Nuclear Energy Research Advisory Committee (NERAC) shall review all program plans for the NGNP; (10) Phase 1 of the project (selection of hydrogen production technology, conduct R and DD and initial design activities) shall be completed no later than September 30, 2011; (11) Phase 2 of the project (continue R and DD, develop final design, apply for a license, construct and start operations) shall be completed by September 30, 2021; and (12) Provision for authorization of appropriations was made. As a result of the direction provided, the INL and the DOE issued an NGNP Preliminary Project Management

FY 1992 Report on the results of the research and development of micromachine technologies. R and D of highly functional maintenance technologies for power generating systems; 1992 nendo micromachine gijutsu no kenkyu kaihatsu seika hokokusho. Hatsuden shisetsuyo kokino maintenance gijutsu kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-03-01

Described herein are the FY 1992 results of the R and D project aimed at development of microcapsules, mother machines, examination modules without retrieval and working modules with retrieval, and their application to total systems for development of the highly functional maintenance technologies for power generating systems. Researches on the microgenerators involve studies and extraction of technical problems for structures, thin-film magnet production methods, coil winding methods, high-speed microbearings and microaccelerators. Researches on the mother machines involve development of the basic elements, on a trial basis, of the electrostatic actuators for the mechanisms of driving the main bodies, and evaluation of their characteristics by a minute torque analyzer. Researches on the examination modules without retrieval involve basic studies on, e.g., expansion driving, supersonic and microwave energy conversion devices for the expansion transfer mechanisms, development of these devices on a trial basis, evaluation of their functions, and extraction of the problems. Researches on the working modules with retrieval involve studies on shape memory alloy materials for tubular manipulators and actuator mechanisms. (NEDO)

Report on achievement in developing fuel cell power generation technology in fiscal 1998. Research and development of molten carbonate fuel cell power generation system (Test of the research result report); 1998 nendo nenryo denchi hatsuden gijutsu kaihatsu seika hokokusho. Yoyu tansan'engata nenryo denchi hatsuden system no kenkyu kaihatsu (kenkyu seika no honbun)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

This paper summarizes the text of the research result report in the separate volume II-1 from among the fiscal 1998 report on the achievement made on researching and developing a molten carbonate fuel cell (MCFC) power generation system. For the AC-DC type system whose high performance and large capacity stacks are being developed, detail designs were made on 250-kW class stack module assembly and installation procedure. At the same time, processing and forming were continued on such main components as electrodes, electrolyte plates and separators. The cells were assembled as modules, sintered, installed and adjusted. Aids were given by the process and control (PAC) test on devices and piping of the fuel cell system block. Cell life extension is also under study. For the parallel flow type stack, two 250-kW stacks were fabricated, and an overall adjustment test was begun thereon in March. For the reformer, an internal reforming system was developed for the 200-kW class system, whose adjustment test is scheduled for April 1999. Capacity increase is also under discussion. For practical use of MCFC, stack life of 40,000 hours is said required. The current status is at the level of exceeding 10,000 hours, but the necessity is seen in suppressing voltage drop associated with lapse of time. (NEDO)

Genetic Determinants of Thrombin Generation and Their Relation to Venous Thrombosis: Results from the GAIT-2 Project

Science.gov (United States)

Martin-Fernandez, Laura; Ziyatdinov, Andrey; Carrasco, Marina; Millon, Juan Antonio; Martinez-Perez, Angel; Vilalta, Noelia; Brunel, Helena; Font, Montserrat; Hamsten, Anders; Souto, Juan Carlos; Soria, José Manuel

2016-01-01

Background Venous thromboembolism (VTE) is a common disease where known genetic risk factors explain only a small portion of the genetic variance. Then, the analysis of intermediate phenotypes, such as thrombin generation assay, can be used to identify novel genetic risk factors that contribute to VTE. Objectives To investigate the genetic basis of distinct quantitative phenotypes of thrombin generation and its relationship to the risk of VTE. Patients/Methods Lag time, thrombin peak and endogenous thrombin potential (ETP) were measured in the families of the Genetic Analysis of Idiopathic Thrombophilia 2 (GAIT-2) Project. This sample consisted of 935 individuals in 35 extended families selected through a proband with idiopathic thrombophilia. We performed also genome wide association studies (GWAS) with thrombin generation phenotypes. Results The results showed that 67% of the variation in the risk of VTE is attributable to genetic factors. The heritabilities of lag time, thrombin peak and ETP were 49%, 54% and 52%, respectively. More importantly, we demonstrated also the existence of positive genetic correlations between thrombin peak or ETP and the risk of VTE. Moreover, the major genetic determinant of thrombin generation was the F2 gene. However, other suggestive signals were observed. Conclusions The thrombin generation phenotypes are strongly genetically determined. The thrombin peak and ETP are significantly genetically correlated with the risk of VTE. In addition, F2 was identified as a major determinant of thrombin generation. We reported suggestive signals that might increase our knowledge to explain the variability of this important phenotype. Validation and functional studies are required to confirm GWAS results. PMID:26784699

Growing the Next Generation of Data Professionals at the National Center for Atmospheric Research

Science.gov (United States)

Hou, C. Y.; Worley, S. J.; Mayernik, M. S.

2017-12-01

As a federally funded research and development center by the National Science Foundation, being able to provide education in order to advance scientific research is a top priority at the National Center for Atmospheric Research (NCAR). Among the various education programs available at the NCAR, the Data Stewardship Engineering Team (DSET) is working with students and early career professionals from the Library and Information Science (LIS) discipline. This LIS group is passionate about learning more about how to optimize the value of research information and often have innovative ideas regarding how to meet current as well as emerging information needs. As a new data initiative that focuses on developing the next generation data services, the NCAR DSET and its Digital Asset Services Hub is a rich, practical environment that provides opportunities for attaining experience and growing dedicated data stewards for the atmospheric and geosciences. In this presentation, the authors will describe the NCAR DSET's new outreach program. We will highlight the process that we are using to engage students and early career information scientists/librarians. This process allows them to acquire practical, hands-on data management and curation skills specific to the Earth sciences by enabling them to participate in an interdisciplinary environment as well as contribute to collaborative activities. We will also discuss the factors that influenced the structuring of the program, and share the current results and lessons learned. Ultimately, we aim to strengthen the NCAR's educational contribution to and collaboration with the LIS discipline by: 1) documenting the experience and soliciting feedback regarding the ways in which we could further expand the mutual interests of Earth sciences and LIS education curricula, and 2) sharing the findings and impacts of the outreach program at NCAR with the education community.

FY 1998 Report on development of large-scale wind power generation systems. Research on the future prospects of wind power generation systems; 1998 nendo ogata furyoku hatsuden system kaihatsu. Furyoku hatsuden system no shorai tenbo ni kansuru chosa kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Current status of wind power generation in Japan and situations in foreign countries ahead of Japan are surveyed, in order to clarify the prospects for the future diffusion and expansion of wind power generation systems in Japan. The surveyed trends of wind power generation in Japan include those related to mandatory laws and regulations, e.g., the Electricity Enterprises Act, introductory and operation situations in local autonomies and electric power companies, and R and D efforts by academic and research organizations. The surveyed wind power generation situations in foreign countries include trends of international standardization for wind power generation, and global situations of introducing these systems. The on-the-spot oversea surveys include location/wind conditions in Greece's islands, cyclone-caused damages in India, World Renewable Energy Congress in Perth and advanced technologies in Europe for wind power generation systems, and the survey results are reported in detail. The surveyed R and D projects in Japan include the basic technological R and D plans (draft) for, e.g., wind power generation systems for isolated islands. (NEDO)

Commercialization of genetic research and its impact on the communication of results.

Science.gov (United States)

Cardinal, G

1999-01-01

Canada has recently seen significant commercial growth in biotechnology; at the same time we have witnessed a considerable reduction in public funding for research. One result is the development of partnerships between academic institutions and industry, which has had important effects on the relationships between researchers, companies, research subjects and society, particularly in the field of genetics. Commercialization of research creates obstacles to the diffusion of research results which is fundamental to the advancement of science. Several recent studies and cases, which are briefly reviewed here, have highlighted these problems. In this paper, the author examines clauses in research contracts in order to analyze and categorize the types of provisions these contracts may contain regarding publication and disclosure of research results. She then discusses the relationships between various actors in genetic research and the issues and conflicts that may arise. Finally, an examination of some recently developed policies in this area reveals the complex network of norms to which a researcher must adhere. The normative framework must take into account the interests of all the various actors, should apply to the broadest possible population, and its various parts must be consistent. Researchers must then be vigilant that they do not enter into contracts which conflict with their rights and obligations regarding publication and dissemination of results.

Decontamination of steam generators at Loviisa NPS - The decision making and the results

International Nuclear Information System (INIS)

Wahlstroem, Bjoern G.

1984-01-01

In 1980, during the annual inspections at Loviisa 1, 440 MWe PWR unit, some minor faults in the welding seams of the water chambers in two of the six steam generators were indicated. This led to enlarged inspection work and to thousands of working hours inside the steam generators. The plant had been three years in operation, so the dose rates in the steam generators were rather high. In this case it turned out, that a formal radiation protection optimization procedure would not give the answer on how to go ahead, as there were several practical and psychological factors influencing the decision making process. Anyhow, the result was that a decontamination apparatus was urgently planned and constructed, and advice on tested decontamination chemicals was received from the plant supplier. Using the decontamination machine with alternating basic and acid solutions, a decontamination factor of DF = 300 was reached, and the repair work could be performed without any restrictions on working time. This paper points out some limiting factors in the decision making process and describes the decontamination equipment, the decontamination solutions and the programme. The cost per saved collective dose unit is also calculated. (author)

Research on the response of various persons to information about nuclear power generation

International Nuclear Information System (INIS)

Maruta, Katsuhiko

2014-01-01

The author surveyed blogs readily available on the Internet for three purposes: (1) to grasp the public response to nuclear problems after the accident at the Fukushima Daiichi Nuclear Power Station, (2) to determine changes in the number of blogs based on an article search, and (3) to identify the stance of bloggers on the necessity of nuclear power generation based on reading contribution contents. Furthermore the author conducted a questionnaire survey of public response in reference to the results of the blog survey. From the blog survey, it was found that immediately after the accident, the number of blogs which were negative toward nuclear power generation drastically increased, but as time has passed, blogs which are positive are increasing in number somewhat in expectation of stabilized economic and living conditions. The main results of the questionnaire survey are as follows. (1) Many persons want power generation that is non-nuclear; this is because they have good expectations for renewable energy sources or new thermal power generation as an alternative energy and they strongly feel anxious about the issue of disposal of spent nuclear fuel. (2) Because of the risk of negative impacts which electricity shortages bring on the economy and lifestyles, some persons do not want immediate decommissioning of nuclear power reactors, they favor a phase-out of nuclear power generation. Though public opinion about nuclear problems includes the expectation that one alternative energy can be selected, there is a possibility that this opinion will shift to find an optimum energy mix of plural energy sources. (author)

Proven collaboration model for impact generating research with universities

CSIR Research Space (South Africa)

Bezuidenhout, DF

2010-09-01

Full Text Available -optics, image processing and computer vision. This paper presents the research collaboration model with universities that has ensured the PRISM programme's success. It is shown that this collaboration model has resulted in a pipeline of highly-skilled people...

Advanced energy utilization MHD power generation

International Nuclear Information System (INIS)

2008-01-01

The 'Technical Committee on Advanced Energy Utilization MHD Power Generation' was started to establish advanced energy utilization technologies in Japan, and has been working for three years from June 2004 to May 2007. This committee investigated closed cycle MHD, open cycle MHD, and liquid metal MHD power generation as high-efficiency power generation systems on the earth. Then, aero-space application and deep space exploration technologies were investigated as applications of MHD technology. The spin-off from research and development on MHD power generation such as acceleration and deceleration of supersonic flows was expected to solve unstart phenomena in scramjet engine and also to solve abnormal heating of aircrafts by shock wave. In addition, this committee investigated researches on fuel cells, on secondary batteries, on connection of wind power system to power grid, and on direct energy conversion system from nuclear fusion reactor for future. The present technical report described results of investigations by the committee. (author)

Ontario Power Generation Nuclear: results and opportunities

International Nuclear Information System (INIS)

Dermarkar, F.

2006-01-01

This paper describes the accomplishments of Ontario Power Generation (OPG) Nuclear and outlines future opportunities. OPG's mandate is to cost effectively produce electricity, while operating in a safe, open and environmentally responsible manner. OPG's nuclear production has been increasing over the past three years - partly from the addition of newly refurbished Pickering A Units 1 and 4, and partly from the increased production from Darlington and Pickering B. OPG will demonstrate its proficiency and capability in nuclear by continuing to enhance the performance and cost effectiveness of its existing operations. Its priorities are to focus on performance excellence, commercial success, openness, accountability and transparency

Research on a New Control Scheme of Photovoltaic Grid Power Generation System

Directory of Open Access Journals (Sweden)

Dong-Hui Li

2014-01-01

Full Text Available A new type of photovoltaic grid power generation system control scheme to solve the problems of the conventional photovoltaic grid power generation systems is presented. To aim at the oscillation and misjudgment of traditional perturbation observation method, an improved perturbation observation method comparing to the next moment power is proposed, combining with BOOST step-up circuit to realize the maximum power tracking. To counter the harmonic pollution problem in photovoltaic grid power generation system, the deadbeat control scheme in fundamental wave synchronous frequency rotating coordinate system of power grid is presented. A parameter optimization scheme based on positive feedback of active frequency shift island detection to solve the problems like the nondetection zone due to the import of disturbance in traditional island detection method is proposed. Finally, the results in simulation environment by MATLAB/Simulink simulation and experiment environment verify the validity and superiority of the proposed scheme.

Interview-Based Qualitative Research in Emergency Care Part II: Data Collection, Analysis and Results Reporting

Science.gov (United States)

Ranney, Megan L.; Meisel, Zachary; Choo, Esther K.; Garro, Aris; Sasson, Comilla; Morrow, Kathleen

2015-01-01

Qualitative methods are increasingly being used in emergency care research. Rigorous qualitative methods can play a critical role in advancing the emergency care research agenda by allowing investigators to generate hypotheses, gain an in-depth understanding of health problems or specific populations, create expert consensus, and develop new intervention and dissemination strategies. In Part I of this two-article series, we provided an introduction to general principles of applied qualitative health research and examples of its common use in emergency care research, describing study designs and data collection methods most relevant to our field (observation, individual interviews, and focus groups). Here in Part II of this series, we outline the specific steps necessary to conduct a valid and reliable qualitative research project, with a focus on interview-based studies. These elements include building the research team, preparing data collection guides, defining and obtaining an adequate sample, collecting and organizing qualitative data, and coding and analyzing the data. We also discuss potential ethical considerations unique to qualitative research as it relates to emergency care research. PMID:26284572

Interview-based Qualitative Research in Emergency Care Part II: Data Collection, Analysis and Results Reporting.

Science.gov (United States)

Ranney, Megan L; Meisel, Zachary F; Choo, Esther K; Garro, Aris C; Sasson, Comilla; Morrow Guthrie, Kate

2015-09-01

Qualitative methods are increasingly being used in emergency care research. Rigorous qualitative methods can play a critical role in advancing the emergency care research agenda by allowing investigators to generate hypotheses, gain an in-depth understanding of health problems or specific populations, create expert consensus, and develop new intervention and dissemination strategies. In Part I of this two-article series, we provided an introduction to general principles of applied qualitative health research and examples of its common use in emergency care research, describing study designs and data collection methods most relevant to our field (observation, individual interviews, and focus groups). Here in Part II of this series, we outline the specific steps necessary to conduct a valid and reliable qualitative research project, with a focus on interview-based studies. These elements include building the research team, preparing data collection guides, defining and obtaining an adequate sample, collecting and organizing qualitative data, and coding and analyzing the data. We also discuss potential ethical considerations unique to qualitative research as it relates to emergency care research. © 2015 by the Society for Academic Emergency Medicine.

Results and plans on the development of a pulsed neutron generator

International Nuclear Information System (INIS)

Sztaricskai, T.; Vasvary, L.; Petoe, G.

1976-01-01

Using the vacuum system of an old van de Graaff machine a new pulsed neutron generator has been developed. The block diagram, the scheme of generators arrangement and the electrode system of the ion bunching parts are shown

Y and Z Generations at Workplaces

Directory of Open Access Journals (Sweden)

Bencsik Andrea

2016-09-01

Full Text Available At present, more and more researches deals with the characteristic features of generation Y and generation Z. As it is about the present and future generations, corporate success and the competitive operation are determined by the behav our of these generations in the long-run. Researches justifies that there are significant differences between the two generations despite the similarities. These differences appear rather emphasized in the corporate environment when several questions arise at workplaces in the process of cooperation – especially in the field of knowledge-sharing and knowledge transfer-regarding the characteristics of the two generations. Last year, the authors carried out a quantitative research by questionnaires in order to reveal what the managing of these two generations mean for the managers and also what difficulties occur when the two generations cooperate with each other and with elder generations as well. The main question of the research was how to approach the new generations from the view of HR? Although the research cannot be considered representative (410 respondents participated in the survey, it can give a picture about the examined issues. The hypothesis phrased by the authors was justified according to which of the HR activities have to adapt to the requirements of the new generations upon their appearance.

Radionuclide generators

International Nuclear Information System (INIS)

Lambrecht, R.M.

1983-01-01

The status of radionuclide generators for chemical research and applications related to the life sciences and biomedical research are reviewed. Emphasis is placed upon convenient, efficient and rapid separation of short-lived daughter radionuclides in a chemical form suitable for use without further chemical manipulation. The focus is on the production of the parent, the radiochemistry associated with processing the parent and daughter, the selection and the characteristic separation methods, and yields. Quality control considerations are briefly noted. The scope of this review includes selected references to applications of radionuclide generators in radiopharmaceutical chemistry, and the life sciences, particularly in diagnostic and therapeutic medicine. The 99 Mo-sup(99m)Tc generator was excluded. 202 references are cited. (orig.)

Presenting results as dynamically generated co-authorship subgraphs in semantic digital library collections

Directory of Open Access Journals (Sweden)

James Powell

2012-02-01

Full Text Available Semantic web representations of data are by definition graphs, and these graphs can be explored using concepts from graph theory. This paper demonstrates how semantically mapped bibliographic metadata, combined with a lightweight software architecture and Web-based graph visualization tools, can be used to generate dynamic authorship graphs in response to typical user queries, as an alternative to more common text-based results presentations. It also shows how centrality measures and path analysis techniques from social network analysis can be used to enhance the visualization of query results. The resulting graphs require modestly more cognitive engagement from the user but offer insights not available from text.

Automated generation of massive image knowledge collections using Microsoft Live Labs Pivot to promote neuroimaging and translational research.

Science.gov (United States)

Viangteeravat, Teeradache; Anyanwu, Matthew N; Ra Nagisetty, Venkateswara; Kuscu, Emin

2011-07-15

Massive datasets comprising high-resolution images, generated in neuro-imaging studies and in clinical imaging research, are increasingly challenging our ability to analyze, share, and filter such images in clinical and basic translational research. Pivot collection exploratory analysis provides each user the ability to fully interact with the massive amounts of visual data to fully facilitate sufficient sorting, flexibility and speed to fluidly access, explore or analyze the massive image data sets of high-resolution images and their associated meta information, such as neuro-imaging databases from the Allen Brain Atlas. It is used in clustering, filtering, data sharing and classifying of the visual data into various deep zoom levels and meta information categories to detect the underlying hidden pattern within the data set that has been used. We deployed prototype Pivot collections using the Linux CentOS running on the Apache web server. We also tested the prototype Pivot collections on other operating systems like Windows (the most common variants) and UNIX, etc. It is demonstrated that the approach yields very good results when compared with other approaches used by some researchers for generation, creation, and clustering of massive image collections such as the coronal and horizontal sections of the mouse brain from the Allen Brain Atlas. Pivot visual analytics was used to analyze a prototype of dataset Dab2 co-expressed genes from the Allen Brain Atlas. The metadata along with high-resolution images were automatically extracted using the Allen Brain Atlas API. It is then used to identify the hidden information based on the various categories and conditions applied by using options generated from automated collection. A metadata category like chromosome, as well as data for individual cases like sex, age, and plan attributes of a particular gene, is used to filter, sort and to determine if there exist other genes with a similar characteristics to Dab2. And

Report on results of feasibility study in fiscal 1986 on use of coal in next generation high efficiency power generation system - research commissioned by Moonlight project propulsion room of Agency of Industrial Science and Technology. MHD generation subcommittee; 1986 nendo jisedai kokoritsu hatsuden system no sekitan gas riyo feasibility chosa kenkyu seika hokokusho (Kogyo Gijutsuin Moonlight keikaku suishinshitsu itaku chosa). MHD hatsuden bunkakai

Energy Technology Data Exchange (ETDEWEB)

NONE

1987-03-01

A research study was done on MHD generation by coal gasificating combustion. MHD generation is a very attractive power generation system such that efficiency is as high as 55%, that preservation of the environment is superior, and that coal can be used as fuel. The open cycle seems suitable for a one million kW class as a base load following up load fluctuation of approximately 20%, while the closed cycle for 200-300 thousand kW class doing daily start-stop. With a mind to a scale of 30 MWt, in the open cycle, R and D is required in such items as a coal gas combustor, generation channel, high temperature air heater, and seed/slag recovery device. In the closed cycle, R and D is required in the generation channel, high temperature helium heater/high temperature valve, seed injection/recovery device, operation technique of helium closed loop, etc.. Moreover, as a total system, development is necessary in the areas of conceptual design and optimization method, partial load operation and DSS operation method, for example. (NEDO)

Research Results Transfer towards the Productive Sector via Research Collaboration in Four Colombian Public Universities

Directory of Open Access Journals (Sweden)

Maria Eugenia Morales Rubiano

2015-12-01

Full Text Available This article shows the determining factors in the research results transfer towards the productive sector via research collaboration in four Colombian public universities. Thirty heads of units in the aforementioned universities were interviewed, which served to determine eleven cases of study and conduct interviews with thirty-five participants ranging from researchers, participant in formation and business people, in each case, it was found that especially in the last decade universities have turned to creating capacities for research collaboration as well as an openness in participants to create links that not only go in favor of enriching the productive sector but also in strengthening formation and research processes. It was concluded that there is a recent growing interest in the different actors in strengthening the bonds between the universities and the productive sector, though there may be some difficulties in the process of research collaboration due to the lack of an appropriate regulatory framework.

Composition, preparation, and gas generation results from simulated wastes of Tank 241-SY-101

International Nuclear Information System (INIS)

Bryan, S.A.; Pederson, L.R.

1994-08-01

This document reviews the preparation and composition of simulants that have been developed to mimic the wastes temporarily stored in Tank 241-SY-101 at Hanford. The kinetics and stoichiometry of gases that are generated using these simulants are also compared, considering the roles of hydroxide, chloride, and transition metal ions; the identities of organic constituents; and the effects of dilution, radiation, and temperature. Work described in this report was conducted for the Flammable Gas Safety Program at Pacific Northwest Laboratory, (a) whose purpose is to develop information that is necessary to mitigate potential safety hazards associated with waste tanks at the Hanford Site. The goal of this research and of related efforts at the Georgia Institute of Technology (GIT), Argonne National Laboratory (ANL), and Westinghouse Hanford Company (WHC) is to determine the thermal and thermal/radiolytic mechanisms by which flammable and other gases are produced in Hanford wastes, emphasizing those stored in Tank 241-SY-101. A variety of Tank 241-SY-101 simulants have been developed to date. The use of simulants in laboratory testing activities provides a number of advantages, including elimination of radiological risks to researchers, lower costs associated with experimentation, and the ability to systematically alter simulant compositions to study the chemical mechanisms of reactions responsible for gas generation. The earliest simulants contained the principal inorganic components of the actual waste and generally a single complexant such as N-(2-hydroxyethyl) ethylenediaminetriacetic acid (HEDTA) or ethylenediaminetriacetic acid (EDTA). Both homogeneous and heterogeneous compositional forms were developed. Aggressive core sampling and analysis activities conducted during Windows C and E provided information that was used to design new simulants that more accurately reflected major and minor inorganic components

Researchers' experience with project management in health and medical research: Results from a post-project review

Science.gov (United States)

2011-01-01

Background Project management is widely used to deliver projects on time, within budget and of defined quality. However, there is little published information describing its use in managing health and medical research projects. We used project management in the Alcohol and Pregnancy Project (2006-2008) http://www.ichr.uwa.edu.au/alcoholandpregnancy and in this paper report researchers' opinions on project management and whether it made a difference to the project. Methods A national interdisciplinary group of 20 researchers, one of whom was the project manager, formed the Steering Committee for the project. We used project management to ensure project outputs and outcomes were achieved and all aspects of the project were planned, implemented, monitored and controlled. Sixteen of the researchers were asked to complete a self administered questionnaire for a post-project review. Results The project was delivered according to the project protocol within the allocated budget and time frame. Fifteen researchers (93.8%) completed a questionnaire. They reported that project management increased the effectiveness of the project, communication, teamwork, and application of the interdisciplinary group of researchers' expertise. They would recommend this type of project management for future projects. Conclusions Our post-project review showed that researchers comprehensively endorsed project management in the Alcohol and Pregnancy Project and agreed that project management had contributed substantially to the research. In future, we will project manage new projects and conduct post-project reviews. The results will be used to encourage continuous learning and continuous improvement of project management, and provide greater transparency and accountability of health and medical research. The use of project management can benefit both management and scientific outcomes of health and medical research projects. PMID:21635721

R and D on new energy technologies. Outlines of fiscal 1976 research results; Shin energy gijutsu kenkyu kaihatsu 1976 nendo kenkyu seika no gaiyo. Kenkyu kaihatsuhi kamihanki

Energy Technology Data Exchange (ETDEWEB)

NONE

1976-07-01

This report outlines the results of (1) 8 researches on solar energy technology, (2) 4 researches on hydrogen energy, and (3) 4 general researches. (1) includes the prototype measuring instrument of near IR solar direct radiation using an interference filter to measure solar spectral irradiance, the prototype small-scale solar heat power model system, selective absorption and transmission films as solar heat power generation materials, InP solar cell and new solar cell system configuration, micro-wave power transmission of solar energy, and the expansion turbine using low-boiling point coolant for space power generation. (2) includes the hydrogen energy system, high-temperature thermolysis of water at 1,000 degrees C, prototype zirconia single-crystals for new solid electrolyte fuel cells, and the large-capacity high- temperature solid electrolyte fuel cell power system. (3) includes the total new energy system, the prototype superconducting magnet for energy storage, study on mechanism of an anomalous absorption effect by irradiation of strong laser beam onto high-temperature high-density ionized gas, and low-temperature difference power generation in the ocean. (NEDO)

Research on Automatic Programming

Science.gov (United States)

1975-12-31

Sequential processes, deadlocks, and semaphore primitives , Ph.D. Thesis, Harvard University, November 1974; Center for Research in Computing...verified. 13 Code generated to effect the synchronization makes use of the ECL control extension facility (Prenner’s CI, see [Prenner]). The... semaphore operations [Dijkstra] is being developed. Initial results for this code generator are very encouraging; in many cases generated code is

FY 1998 Report on development of large-scale wind power generation systems. Part 1. Operational research on large-scale wind power generation systems; 1998 nendo ogata furyoku hatsuden system kaihatsu seika hokokusho. 1. Ogata furyoku hatsuden system no unten kenkyu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The research and development project is implemented for large-scale wind power generation systems, and the FY 1998 results are reported. In the FY 1998, a slip property variable generator is actually mounted on the wind power generator, to conduct various types of demonstration tests. The reliability validation tests include microstructure examinations, fatigue tests and fatigue strength tests to predict residual strength in the blade. It is confirmed that the blade has a sufficient residual strength. The performance validation tests include continuous measurement of power outputs and wind velocities, and analysis of the output fluctuations. The power output performance during winter when the west wind prevails is higher than designed. In the tests for evaluating the characteristics of the system on which a slip property variable generator is mounted, the output smoothing effect is confirmed in a range beyond the rated output. The wind power generation system is continuously operated, to accumulate the operational data for, e.g., capacity factor, operating time rate, and system failure status. The FY 1998 results are 920,000kWh as the output and 21% as capacity factor. The other items investigate include aerodynamic noise reduction countermeasures, fatigue life of the wind turbine blades, economics of wind power generation, and dismantling and reuse of the wind turbines. (NEDO)

Analysis of information quality attribute for SME towards adoption of research result

Science.gov (United States)

Febriani, E.; Dewobroto, W. S.; Anggraini, R. D.

2017-12-01

Small and Medium Enterprises (SME) holds significant role in fostering Indonesian economy. However, the research that is supposed to support the development of SMEs business has not yet fully adopted or utilized. Information attributes may be used as the benchmark to find the intention of SMEs from a research result and develop the strategy of quality information for all organizations both SMEs and the researcher. Therefore, because of the importance of information quality attribute required by SMEs, the research aims to analyses the information quality required by SMEs to clarify the information quality into the dimension of information quality. The research was started by distributing online questionnaire to SMEs. The questionnaire result showed that the content dimension is the most aspect required by SMEs, followed by time and form dimension, respectively. Quality information attribute required by SMEs from a research is that the result may be applied to the business.

Fiscal 1976 Sunshine Project result report. Research on solar energy utilization systems (solar heat power generation); 1976 nendo taiyo energy riyo system chosa kenkyu seika hokokusho. Taiyonetsu hatsuden

Energy Technology Data Exchange (ETDEWEB)

NONE

1977-03-01

Research was made on solar heat power generation following last fiscal year, as a part of solar energy utilization technologies. In this fiscal year, in particular, research was made on the following: selection of suitable sites for solar heat power plants in Japan, estimation of expected power supply, positioning of a solar heat power system among future power systems, operation policy of solar heat power systems, survey on suitable sites for the 1,000kW pilot power plant, operation characteristics of the small test plant, design of the 1,000kW pilot power plant, test methods and facilities for every element equipment of solar heat power systems, an environmental test method for mostly solar collectors, and the profitability of solar heat power systems. Optimum operation temperature levels were nearly 350 degrees C for distributed systems and nearly 400 degrees C for centralized ones. The distributed system is profitable in a unit capacity range less than 5-10MWe, while the centralized system is profitable in a range over 10MWe. Under some assumptions, the power cost of solar heat power systems was estimated to be 20-30yen/kWH. (NEDO)

Voluntary research results for five years along the master plan on nuclear safety research. FY 2001 - 2005

International Nuclear Information System (INIS)

Sato, Yoshinori

2006-05-01

Safety Research has been conducted from FY 2001 to FY 2005 according to the Master Plan on Nuclear Safety Research (FY 2001-2005) in Japan Atomic Energy Agency which took over former Japan Nuclear Cycle Development Institute. This report shows the voluntary research results for five years conducted from FY 2001 to FY 2005 according to the Master Plan on Nuclear Safety Research (FY 2001-2005). (author)

The Researches on Cycle-Changeable Generation Settlement Method

Science.gov (United States)

XU, Jun; LONG, Suyan; LV, Jianhu

2018-03-01

Through the analysis of the business characteristics and problems of price adjustment, a cycle-changeable generation settlement method is proposed to support any time cycle settlement, and put forward a complete set of solutions, including the creation of settlement tasks, time power dismantle, generating fixed cycle of electricity, net energy split. At the same time, the overall design flow of cycle-changeable settlement is given. This method supports multiple price adjustments during the month, and also is an effective solution to the cost reduction of month-after price adjustment.

Review of Micro Magnetic Generator

Directory of Open Access Journals (Sweden)

Lin DU

2014-08-01

Full Text Available This paper discusses the research progress of micro magnetic generator systems. Micro magnetic generator systems convert energy from the environment to electric energy with advantages as high reliability, high power density, long life time and can be applied to extreme environment. This paper summarizes methods for improving generator performance of micro magnetic generator, including rotational magnetic generator, vibrational magnetic generator and hybrid magnetic generator, analyzes and compares their design and performance, and concludes key technologies and ongoing challenges for further progress. The paper is instructive and meaningful to for research work of related field.

Performance of PZC-Mo generator and labeling results prepared with its eluate and MDP kit

International Nuclear Information System (INIS)

Yishu Liu

2006-01-01

This paper described the performance of Tc-99m generator prepared with Mo adsorbent PZC and irradiated nature MoO 3 , and the labeling results of MDP kit prepared with Tc-99m eluted from PZC-Mo generator and MDP was report as well. ThreeTc-99m generators was prepared with different batches of PZC and reactor irradiated nature Mo. The adsorption efficiency of two batches of the PZC is good (96.4% and 93.4%) and that of one batch of PZC is not satisfy (77.8%). The elution efficiency is not so high, and it increases along with the elution date. The elution file is very broad till to 30 ml and the Mo breakthrough is high to unacceptable. The labelling efficiency of MDP kit, prepared with Tc-99m eluate eluted with saline containing 0.05% NaClO from Mo-PZC generator, is approximately 77∼84% and it can reach to >98% labelling with eluate without containing 0.05%HClO in eluate. (author)

Surry steam generator - examination and evaluation

International Nuclear Information System (INIS)

Clark, R.A.; Doctor, P.G.; Ferris, R.H.

1985-10-01

This report summarizes research conducted during the fourth year of the five year Steam Generator Group Project. During this period the project conducted numerous nondestructive examination (NDE) round robin inspections of the original Surry 2A steam generator. They included data acquisition/analysis and analysis-only round robins using multifrequency bobbin coil eddy current tests. In addition, the generator was nondestructively examined by alternate or advanced techniques including ultrasonics, optical fiber, profilometry and special eddy current instrumentation. The round robin interpretation data were compared. To validate the NDE results and for tube integrity testing, a selection of tubing samples, determined to be representative of the generator, was designated for removal. Initial sample removals from the generator included three sections of tube sheet, two sections of support plate and encompassed tubes, and a number of straight and U-bend tubing sections. Metallographic examination of these sections was initiated. Details of significant results are presented in the following paper. 13 figs

Surry steam generator - examination and evaluation

Energy Technology Data Exchange (ETDEWEB)

Clark, R A; Doctor, P G; Ferris, R H

1987-01-01

This report summarizes research conducted during the fourth year of the five year Steam Generator Group Project. During this period the project conducted numerous nondestructive examination (NDE) round robin inspections of the original Surry 2A steam generator. They included data acquisition/analysis and analysis-only round robins using multifrequency bobbin coil eddy current tests. In addition, the generator was nondestructively examined by alternate or advanced techniques including ultrasonics, optical fiber, profilometry and special eddy current instrumentation. The round robin interpretation data were compared. To validate the NDE results and for tube integrity testing, a selection of tubing samples, determined to be representative of the generator, was designated for removal. Initial sample removals from the generator included three sections of tube sheet, two sections of support plate and encompassed tubes, and a number of straight and U-bend tubing sections. Metallographic examination of these sections was initiated. Details of significant results are presented in the following paper.

Personal identifiers in medical research networks: evaluation of the personal identifier generator in the Competence Network Paediatric Oncology and Haematology

Directory of Open Access Journals (Sweden)

Pommerening, Klaus

2006-06-01

Full Text Available The Society for Paediatric Oncology and Haematology (GPOH and the corresponding Competence Network Paediatric Oncology and Haematology conduct various clinical trials. The comprehensive analysis requires reliable identification of the recruited patients. Therefore, a personal identifier (PID generator is used to assign unambiguous, pseudonymous, non-reversible PIDs to participants in those trials. We tested the matching algorithm of the PID generator using a configuration specific to the GPOH. False data was used to verify the correct processing of PID requests (functionality tests, while test data was used to evaluate the matching outcome. We also assigned PIDs to more than 44,000 data records from the German Childhood Cancer Registry (GCCR and assessed the status of the associated patient list which contains the PIDs, partly encrypted data items and information on the PID generation process for each data record. All the functionality tests showed the expected results. Neither 14,915 test data records nor the GCCR data records yielded any homonyms. Six synonyms were found in the test data, due to erroneous birth dates, and 22 synonyms were found when the GCCR data was run against the actual patient list of 2579 records. In the resulting patient list of 45,693 entries, duplicate record submissions were found for about 7% of all listed patients, while more frequent submissions occurred in less than 1% of cases. The synonym error rate depends mainly on the quality of the input data and on the frequency of multiple submissions. Depending on the requirements on maximally tolerable synonym and homonym error rates, additional measures for securing input data quality might be necessary. The results demonstrate that the PID generator is an appropriate tool for reliably identifying trial participants in medical research networks.

Review of scientific Research results in identification of plant raw materials in food products

OpenAIRE

GOLUBTSOVA YU. V.

2016-01-01

Currently, the science-based capabilities have been generated to develop and test various identification methods of food products and reveal adulteration using advanced technique and processes. This article reviews researches and developments to identify the plant raw materials in food products based on morphological, anatomic, physical and chemical test methods and the latest DNA-technologies. Review of physical, chemical, anatomic and morphological test methods to identify raw materials bot...

Sandia's recent results in particle beam research

International Nuclear Information System (INIS)

Yonas, G.

1977-01-01

Recent results in the Sandia particle beam fusion research program are briefly discussed. Ignition of pellet fusion targets by both electron and ion beams are under study. Power concentration, dielectric breakdown, diode optimization, and beam-target interaction experiments are briefly described. Magnetic insulation considerations are discussed. Efforts to utilize higher impedance diode sources and reduce minimum power pulse widths are described. Analyses indicate that particle beam ignition systems might yield pellet gains greater than 10 in hybrid and approximately 100 in pure fusion reactors. A bibliography of 23 references is included

Lewis Research Center studies of multiple large wind turbine generators on a utility network

Science.gov (United States)

Gilbert, L. J.; Triezenberg, D. M.

1979-01-01

A NASA-Lewis program to study the anticipated performance of a wind turbine generator farm on an electric utility network is surveyed. The paper describes the approach of the Lewis Wind Energy Project Office to developing analysis capabilities in the area of wind turbine generator-utility network computer simulations. Attention is given to areas such as, the Lewis Purdue hybrid simulation, an independent stability study, DOE multiunit plant study, and the WEST simulator. Also covered are the Lewis mod-2 simulation including analog simulation of a two wind turbine system and comparison with Boeing simulation results, and gust response of a two machine model. Finally future work to be done is noted and it is concluded that the study shows little interaction between the generators and between the generators and the bus.

Research and development activities of a neutron generator facility

International Nuclear Information System (INIS)

Darsono Sudjatmoko; Pramudita Anggraita; Sukarman Aminjoyo

2000-01-01

The neutron generator facility at YNRC is used for elemental analysis, nuclear data measurement and education. In nuclear data measurement the focus is on re-evaluating the existing scattered nuclear activation cross-section to obtain systematic data for nuclear reactions such as (n,p), (n,α), and (n,2n). In elemental analysis it is used for analyzing the Nitrogen (N), Phosphor (P) and Potassium (K) contents in chemical and natural fertilizers (compost), protein in rice, soybean, and corn and pollution level in rivers. The neutron generator is also used for education and training of BATAN staff and university students. The facility can also produce neutron generator components. (author)

Report of the research results with University of Tokyo, Nuclear Engineering Research Laboratory's Facilities in fiscal 1979

International Nuclear Information System (INIS)

1980-01-01

The common utilization of the fast neutron source reactor ''Yayoi'' in the University of Tokyo has been continued for nine years, and many results have been obtained. As for the linac, the common utilization was commenced in the last fiscal year. 1663 men utilized the reactor, and 1063 men utilized the linac in 1979. At present, the on-pile researches centering around these two large installations and the off-pile researches toward new large-scale ones are two pillars. It is delightful to collect universal knowledge in the form of the common utilization, to promote researches effectively and to feed the results of researches back to education. Now the learning is devided finely, and the fields in which solution requires the concentration of the expertises in various fields have increased, accordingly the importance of such common utilization has grown more and more. In the common utilization of the reactors, many results were obtained in the researches on the utilization of fast neutron irradiation, the irradiation for medical use, shielding, nuclear fusion neutronics and so on. In the experiments using the linac, the number of the themes is too much, and the machine time allotted to respective themes is very much in short. The night operation system was adopted to ease the situation. Picosecond pulse radiolysis, pulse irradiation in gas, liquid and solid phases, and TOF experiment produced the results. (Kako, I.)

Engineering high reliability, low-jitter Marx generators

International Nuclear Information System (INIS)

Schneider, L.X.; Lockwood, G.J.

1985-01-01

Multimodule pulsed power accelerators typically require high module reliability and nanosecond regime simultaneity between modules. Energy storage using bipolar Marx generators can meet these requirements. Experience gained from computer simulations and the development of the DEMON II Marx generator has led to a fundamental understanding of the operation of these multistage devices. As a result of this research, significant improvements in erection time jitter and reliability have been realized in multistage, bipolar Marx generators. Erection time jitter has been measured as low as 2.5 nanoseconds for the 3.2MV, 16-stage PBFA I Marx and 3.5 nanoseconds for the 6.0MV, 30-stage PBFA II (DEMON II) Marx, while maintaining exceptionally low prefire rates. Performance data are presented from the DEMON II Marx research program, as well as discussions on the use of computer simulations in designing low-jitter Marx generators

INTERRAD - inductive terawatt X-ray generator (project)

Energy Technology Data Exchange (ETDEWEB)

Popkov, N F; Pikar` , A S; Kargin, V I; Ryaslov, E A; Lyubomirskij, A G [All-Russian Scientific Research Inst. of Experimental Physics, Sarov (Russian Federation)

1997-12-31

The results are given of the development and experimental research of explosive electron beam accelerator circuits powered by magneto-cumulative generators forming the current pulse, using explosive plasma opening switches. The conceptual lay-out of inductive terawatt X-ray generators powered by EMGs is proposed. The calculation results of the terawatt x-ray generator including the load placed in a special bunker are presented. Analyzed are the losses at the stage of the HE energy conversion into that of the magnetic fields, those occur ing in transmission along the high-voltage cable line, as well as the processes developing in the plasma opening switches. (author). 2 figs., 6 refs.

NASA Plan for Increasing Access to the Results of Scientific Research

Science.gov (United States)

2014-01-01

This plan is issued in response to the Executive Office of the President's February 22, 2013, Office of Science and Technology Policy (OSTP) Memorandum for the Heads of Executive Departments and Agencies, "Increasing Access to the Results of Federally Funded Scientific Research." Through this memorandum, OSTP directed all agencies with more than $100 million in annual research and development expenditures to prepare a plan for improving the public's access to the results of federally funded research. The National Aeronautics and Space Administration (NASA) invests on the order of $3 billion annually in fundamental and applied research and technology development1 across a broad range of topics, including space and Earth sciences, life and physical sciences, human health, aeronautics, and technology. Promoting the full and open sharing of data with research communities, private industry, academia, and the general public is one of NASA's longstanding core values. For example, NASA's space and suborbital mission personnel routinely process, archive, and distribute their data to researchers around the globe. This plan expands the breadth of NASA's open-access culture to include data and publications for all of the scientific research that the Agency sponsors.

FY 2000 report on the demonstrative research for photovoltaic power generation system in Thailand. Demonstrative study on photovoltaic power generation grid-connected system

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-09-01

In relation to the demonstrative study of the photovoltaic power system that is planned in Libong island, Thailand, the FY 2000 results were reported. In this R and D, construction/demonstrative operation were planned for a photovoltaic power station with a generation output of 100kW, photovoltaic power system in school facilities, and system for transmitting/distributing power to houses by connecting the power station and power system. In this fiscal year, the field survey was conducted together with the alteration from Yao Yai island, for which the demonstrative study was planned at first, to Libong island. The electric equipment was selected which met the requests from Thailand and the results of the field survey, and the basic design of the photovoltaic power generation/transmission/distribution system was completed. Based on this, the design/manufacture of photovoltaic power generation modules, power control equipment, measuring equipment, etc. were made. At the construction site of photovoltaic power station, construction work such as land formation was conducted. Further, Thai engineers who visited Japan did the following: discussions about power system, presence at test/inspection of photovoltaic power generation modules, visits to photovoltaic power stations, wind power stations, etc. (NEDO)

A bibliometric study of scientific research conducted on second-generation antipsychotic drugs in Singapore.

Science.gov (United States)

López-Muñoz, Francisco; Sim, Kang; Shen, Winston Wu; Huelves, Lorena; Moreno, Raquel; Molina, Juan de Dios; Rubio, Gabriel; Noriega, Concha; Pérez-Nieto, Miguel Ángel; Alamo, Cecilio

2014-01-01

A bibliometric study was carried out to ascertain the volume and impact of scientific literature published on second-generation antipsychotic drugs (SGAs) in Singapore from 1997 to 2011. A search of the EMBASE and MEDLINE databases was performed to identify articles originating from Singapore that included the descriptors 'atypic* antipsychotic*', 'second-generation antipsychotic*', 'clozapine', 'risperidone', 'olanzapine', 'ziprasidone', 'quetiapine', 'sertindole', 'aripiprazole', 'paliperidone', 'amisulpride', 'zotepine', 'asenapine', 'iloperidone', 'lurasidone', 'perospirone' and 'blonanserin' in the article titles. Certain bibliometric indicators of production and dispersion (e.g. Price's Law on the increase of scientific literature, and Bradford's Law) were applied, and the participation index of various countries was calculated. The bibliometric data was also correlated with some social and health data from Singapore, such as the total per capita expenditure on health and gross domestic expenditure on research and development. From 1997 to 2011, a total of 51 articles on SGAs in Singapore were published. Our results suggested non-fulfilment of Price's Law (r = 0.0648 after exponential adjustment vs. r = 0.2140 after linear adjustment). The most widely studied drugs were clozapine (21 articles), risperidone (16 articles) and olanzapine (8 articles). Division into Bradford zones yielded a nucleus occupied by the Journal of Clinical Psychopharmacology (6 articles) and the Singapore Medical Journal(4 articles). The analysed material was published in a total of 30 journals, with the majority from six journals. Four of these six journals have an impact factor greater than 2. Publications on SGAs in Singapore are still too few to confirm an exponential growth of scientific literature.

Flux gain for a next-generation neutron reflectometer resulting from improved supermirror performance

CERN Document Server

Rehm, C

2002-01-01

Next-generation spallation neutron source facilities will offer instruments with unprecedented capabilities through simultaneous enhancement of source power and usage of advanced optical components. The Spallation Neutron Source (SNS), already under construction at Oak Ridge National Laboratory and scheduled to be completed by 2006, will provide greater than an order of magnitude more effective source flux than current state-of-the-art facilities, including the most advanced research reactors. An additional order of magnitude gain is expected through the use of new optical devices and instrumentation concepts. Many instrument designs require supermirror neutron guides with very high critical angles for total reflection. In this contribution, we will discuss how the performance of a modern neutron-scattering instrument depends on the efficiency of these supermirrors. We summarize current limitations of supermirror coatings and outline ideas for enhancing their performance, particularly for improving the reflec...

Report of the research results with JAERI's facilities in fiscal 1975

International Nuclear Information System (INIS)

1976-07-01

Results of the research works by educational institutions using facilities of the Japan Atomic Energy Research Institute in fiscal 1975 are reported in individual summaries. Facilities utilized are research reactors, Co-60 irradiation facilities, hot laboratory, Linac and electron accelerators. Fields of research are the following: nuclear physics, radiation damage/solid-state physics, positron annihilation, activation analysis/nuclear chemistry, hot atom chemistry, irradiation effects, biology, and neutron diffraction; and, cooperative works to JAERI. (Mori, K.)

Results from oil spill response research - an update

International Nuclear Information System (INIS)

Tennyson, E.J.

1993-01-01

Recent large oil spills from tankers have reaffirmed the need for continuing technology assessment and research to improve oil spill response capabilities. This paper discusses Minerals Management Service concerns, as reinforced by the acceleration of its research program in 1990. It briefly assesses current state-of-the-art technology for major aspects of spill response, including remote sensing, open-ocean containment and recovery, in-situ burning, use of chemical treating agents, beachline cleanup, and oil behavior. Specific research projects have begun to yield information that will improve detection and at-sea equipment performance; current projects include the development of an airborne laser-fluorosensor to determine whether apparent slicks contain oil. Additional projects involve the development of improved strategies for responding to oil in broken-ice conditions, for gaining an improved understanding of the fate and behavior of spilled oil as it affects response strategies, and for defining the capabilities of available dispersants and development of improved formulations. Recently, progress has been made on the development of safe and environmentally acceptable strategies to burn spilled oil in situ. The Ohmsett facility has been reopened and will be used to test prospective improvements in chemical treating agents and to develop standard procedures for testing and evaluating response equipment. Results of research published since the last Oil Spill Conference are discussed

Toward a fourth-generation X-ray source

International Nuclear Information System (INIS)

Monction, D. E.

1999-01-01

The field of synchrotron radiation research has grown rapidly over the last 25 years due to both the push of the accelerator and magnet technology that produces the x-ray beams and the pull of the extraordinary scientific research that is possible with them. Three successive generations of synchrotrons radiation facilities have resulted in beam brilliances 11 to 12 orders of magnitude greater than the standard laboratory x-ray tube. However, greater advances can be easily imagined given the fact that x-ray beams from present-day facilities do not exhibit the coherence or time structure so familiar with the optical laser. Theoretical work over the last ten years or so has pointed to the possibility of generating hard x-ray beams with laser-like characteristics. The concept is based on self-amplified spontaneous emission (SASE) in flee-electron lasers. A major facility of this type based upon a superconducting linac could produce a cost-effective facility that spans wave-lengths from the ultraviolet to the hard x-ray regime, simultaneously servicing large numbers experimenters from a wide range of disciplines. As with each past generation of synchrotrons facilities, immense new scientific opportunities would result from fourth-generation sources.

Work engagement and meaningful work across generational cohorts

Directory of Open Access Journals (Sweden)

Crystal Hoole

2015-08-01

Full Text Available Orientation: Engaging employees and providing employees with a sense of meaning at work is not a one-size-fits-all approach. Although research has shown that differences between work engagement and meaningful work amongst generational cohorts exist, results are still inconclusive. With age becoming increasingly more important as a diversity factor, a better understanding of the dynamics between work engagement and meaningful work across different generational cohorts is necessary to design the right strategy for each organisation’s unique parameters. Research purpose: The aim of this study was to determine whether there is a relationship between work engagement and meaningful work and whether there are significant variances between the levels of work engagement and meaningful work between different generational cohorts. Motivation for study: Work engagement has consistently been highlighted by researchers and human resources experts as a recommended solution to provide companies with the upper hand when it comes to creating a competitive edge. Yet, levels of work engagement are far from ideal, requiring intensified efforts to identify solutions towards raising overall engagement levels. In recent years, much of the focus in terms of generating engagement has been aimed in the direction of financial rewards and other benefits; some organisational experts are of the opinion that a shift is occurring towards meaningful work instead of monetary rewards as the driver of engagement. The changing nature of the work landscape also suggests that generational cohorts experience work engagement and meaningful work differently. Understanding these complexities is mandatory in creating solutions towards improving levels of engagement and meaningful work. Research approach, design and method: A cross-sectional quantitative research approach has been followed. The Utrecht Work Engagement Scale (UWES and Psychological Meaningful Scale (PMS were administered

Progress on the Development of (n,γ)99Mo/99mTc generator, an Alternative of Conventional Generator

International Nuclear Information System (INIS)

Lee, Jun Sig; Choi, Seung Rag; Nam, Seong Su; Park, Ul Jae; Son, Kwang Jae; Choi, Kang Hyuk; Choi, Sun Ju

2010-01-01

Even though different types of generators have been developed to extract 99m Tc, most of the generators uses 99 Mo from the fission products as the mother radionuclide of 99m Tc. Recently, the crisis of 99 Mo production becomes one of the international issues as 99m Tc is a dominant diagnostic radionuclide. The shortage of 99m Tc has been predicted in the society for more than 10 years. However, actions to prevent such crisis were slow as the initial investment to construct a new research reactor for the production of 99 Mo is high. Currently, it is expected the shortage of 99m Tc will last at least for more than 5 years. As an alternative to minimize such crisis, a new approach is proposed and studied. In this approach, the mother source of 99m Tc comes not from fission products but from the neutron irradiation of molybdenum oxide. Hence, most of the research reactors, which do not have capability to produce fission molybdenum, (n,f) 99 Mo can produce 99 Mo. The key issue in this approach is the uptake capacity of the generator column for (n, γ) 99 Mo, which has extremely low specific activity compared to (n,f) 99 Mo. Currently, the results from the research activities at Korea Atomic Energy Research Institute have shown such approach has enough potential as an alternative of the conventional generator. Hence, the progress of the research is reported in this paper

Training the Next Generation in Space Situational Awareness Research

Science.gov (United States)

Colpo, D.; Reddy, V.; Arora, S.; Tucker, S.; Jeffries, L.; May, D.; Bronson, R.; Hunten, E.

Traditional academic SSA research has relied on commercial off the shelf (COTS) systems for collecting metric and lightcurve data. COTS systems have several advantages over a custom built system including cost, easy integration, technical support and short deployment timescales. We at the University of Arizona took an alternative approach to develop a sensor system for space object characterization. Five engineering students designed and built two 0.6-meter F/4 electro-optical (EO) systems for collecting lightcurve and spectral data. All the design and fabrication work was carried out over the course of two semesters as part f their senior design project that is mandatory for the completion of their bachelors in engineering degree. The students designed over 200 individual parts using three-dimensional modeling software (SolidWorks), and conducted detailed optical design analysis using raytracing software (ZEMAX), with oversight and advice from faculty sponsor and Starizona, a local small business in Tucson. The components of the design were verified by test, analysis, inspection, or demonstration, per the process that the University of Arizona requires for each of its design projects. Methods to complete this project include mechanical FEA, optical testing methods (Foucault Knife Edge Test and Couder Mask Test), tests to verify the function of the thermometers, and a final pointing model test. A surprise outcome of our exercise is that the entire cost of the design and fabrication of these two EO systems was significantly lower than a COTS alternative. With careful planning and coordination we were also able to reduce to the deployment times to those for a commercial system. Our experience shows that development of hardware and software for SSA research could be accomplished in an academic environment that would enable the training of the next generation with active support from local small businesses.

Identification of High Confidence Nuclear Forensics Signatures. Results of a Coordinated Research Project and Related Research

International Nuclear Information System (INIS)

2017-08-01

The results of a Coordinated Research Project and related research on the identification of high confidence nuclear forensic isotopic, chemical and physical data characteristics, or signatures, provides information on signatures that can help identify the origin and history of nuclear and other radioactive material encountered out of regulatory control. This research report compiles findings from investigations of materials obtained from throughout the nuclear fuel cycle to include radioactive sources. The report further provides recent results used to identify, analyse in the laboratory, predict and interpret these signatures relative to the requirements of a nuclear forensics examination. The report describes some of the controls on the incorporation and persistence of these signatures in these materials as well as their potential use in a national system of identification to include a national nuclear forensics library.

INTERINSTITUTIONAL COOPERATION: RESULTS INDICATORS OF INTERACTIONS OF VISITING RESEARCHERS IN HIGHER EDUCATION AND RESEARCH INSTITUTIONS

Directory of Open Access Journals (Sweden)

Fabricio Baron Mussi

2014-12-01

Full Text Available This paper aims to define a proposition for a characterization of indicators applicable to evaluate joint research results. In order to do that, literature on interinstitutional cooperation, exchange programs and indicators was assessed, and its guidelines, adopted. Ten cases were selected for evaluation, and the following procedures undertaken: visits to receptor institutions in several cities; visits to workplace where the subjected projects were being developed; interviews with project managers and visiting researchers; interviews with other personnel; review of the approved projects' official documentation collected during the previous steps; and a new contact with the respondents to clarify eventual doubts. Theoretically, this research contributes to the development of a proposal of a set of indicators to characterize and evaluate interdisciplinary cooperation between researchers from universities and distinct research institutes. Practical contributions to be mentioned are the information gathered that can help promotion agencies to improve their supporting edicts offered to scientific and technological development, as well as upgrading their evaluation systems regarding such actions.

Search Results | Page 845 | IDRC - International Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

Results 8441 - 8450 of 8518 ... GrOW works with research teams around the world to generate evidence on women's economic empowerment and to promote the use of research by key decision-makers. ... We are strengthening developing-country skills and institutions in science, technology, engineering, and mathematics.

Search Results | Page 842 | IDRC - International Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

Results 8411 - 8420 of 8489 ... GrOW works with research teams around the world to generate evidence on women's economic empowerment and to promote the use of research by key decision-makers. ... We are strengthening developing-country skills and institutions in science, technology, engineering, and mathematics.

Next-Generation Genomics Facility at C-CAMP: Accelerating Genomic Research in India

Science.gov (United States)

S, Chandana; Russiachand, Heikham; H, Pradeep; S, Shilpa; M, Ashwini; S, Sahana; B, Jayanth; Atla, Goutham; Jain, Smita; Arunkumar, Nandini; Gowda, Malali

2014-01-01

Next-Generation Sequencing (NGS; http://www.genome.gov/12513162) is a recent life-sciences technological revolution that allows scientists to decode genomes or transcriptomes at a much faster rate with a lower cost. Genomic-based studies are in a relatively slow pace in India due to the non-availability of genomics experts, trained personnel and dedicated service providers. Using NGS there is a lot of potential to study India's national diversity (of all kinds). We at the Centre for Cellular and Molecular Platforms (C-CAMP) have launched the Next Generation Genomics Facility (NGGF) to provide genomics service to scientists, to train researchers and also work on national and international genomic projects. We have HiSeq1000 from Illumina and GS-FLX Plus from Roche454. The long reads from GS FLX Plus, and high sequence depth from HiSeq1000, are the best and ideal hybrid approaches for de novo and re-sequencing of genomes and transcriptomes. At our facility, we have sequenced around 70 different organisms comprising of more than 388 genomes and 615 transcriptomes – prokaryotes and eukaryotes (fungi, plants and animals). In addition we have optimized other unique applications such as small RNA (miRNA, siRNA etc), long Mate-pair sequencing (2 to 20 Kb), Coding sequences (Exome), Methylome (ChIP-Seq), Restriction Mapping (RAD-Seq), Human Leukocyte Antigen (HLA) typing, mixed genomes (metagenomes) and target amplicons, etc. Translating DNA sequence data from NGS sequencer into meaningful information is an important exercise. Under NGGF, we have bioinformatics experts and high-end computing resources to dissect NGS data such as genome assembly and annotation, gene expression, target enrichment, variant calling (SSR or SNP), comparative analysis etc. Our services (sequencing and bioinformatics) have been utilized by more than 45 organizations (academia and industry) both within India and outside, resulting several publications in peer-reviewed journals and several genomic

WiseEye: Next Generation Expandable and Programmable Camera Trap Platform for Wildlife Research.

Directory of Open Access Journals (Sweden)

Sajid Nazir

Full Text Available The widespread availability of relatively cheap, reliable and easy to use digital camera traps has led to their extensive use for wildlife research, monitoring and public outreach. Users of these units are, however, often frustrated by the limited options for controlling camera functions, the generation of large numbers of images, and the lack of flexibility to suit different research environments and questions. We describe the development of a user-customisable open source camera trap platform named 'WiseEye', designed to provide flexible camera trap technology for wildlife researchers. The novel platform is based on a Raspberry Pi single-board computer and compatible peripherals that allow the user to control its functions and performance. We introduce the concept of confirmatory sensing, in which the Passive Infrared triggering is confirmed through other modalities (i.e. radar, pixel change to reduce the occurrence of false positives images. This concept, together with user-definable metadata, aided identification of spurious images and greatly reduced post-collection processing time. When tested against a commercial camera trap, WiseEye was found to reduce the incidence of false positive images and false negatives across a range of test conditions. WiseEye represents a step-change in camera trap functionality, greatly increasing the value of this technology for wildlife research and conservation management.

Test Program for Stirling Radioisotope Generator Hardware at NASA Glenn Research Center

Science.gov (United States)

Lewandowski, Edward J.; Bolotin, Gary S.; Oriti, Salvatore M.

2015-01-01

Stirling-based energy conversion technology has demonstrated the potential of high efficiency and low mass power systems for future space missions. This capability is beneficial, if not essential, to making certain deep space missions possible. Significant progress was made developing the Advanced Stirling Radioisotope Generator (ASRG), a 140-W radioisotope power system. A variety of flight-like hardware, including Stirling convertors, controllers, and housings, was designed and built under the ASRG flight development project. To support future Stirling-based power system development NASA has proposals that, if funded, will allow this hardware to go on test at the NASA Glenn Research Center. While future flight hardware may not be identical to the hardware developed under the ASRG flight development project, many components will likely be similar, and system architectures may have heritage to ASRG. Thus, the importance of testing the ASRG hardware to the development of future Stirling-based power systems cannot be understated. This proposed testing will include performance testing, extended operation to establish an extensive reliability database, and characterization testing to quantify subsystem and system performance and better understand system interfaces. This paper details this proposed test program for Stirling radioisotope generator hardware at NASA Glenn. It explains the rationale behind the proposed tests and how these tests will meet the stated objectives.

First-Generation Versus Second-Generation Drug-Eluting Stents in Coronary Chronic Total Occlusions: Two-Year Results of a Multicenter Registry.

Directory of Open Access Journals (Sweden)

Jong-Hwa Ahn

Full Text Available Limited data are available regarding the long-term clinical outcomes of second-generation drug-eluting stents (DES versus first-generation DES in patients with coronary chronic total occlusion (CTO who undergo percutaneous coronary intervention (PCI. The aim of this study was to compare the clinical outcomes of second-generation DES with those of first-generation DES for the treatment of CTO.Between March 2003 and February 2012, 1,006 consecutive patients with CTO who underwent successful PCI using either first-generation DES (n = 557 or second-generation DES (n = 449 were enrolled in a multicenter, observational registry. Propensity-score matching was also performed. The primary outcome was cardiac death over a 2-year follow-up period. No significant differences were observed between the two groups regarding the incidence of cardiac death (first-generation DES versus second-generation DES; 2.5% vs 2.0%; hazard ratio [HR]: 0.86; 95% confidence interval [CI]: 0.37 to 1.98; p = 0.72 or major adverse cardiac events (MACE, 11.8% vs 11.4%; HR: 1.00; 95% CI: 0.67 to 1.50; p = 0.99. After propensity score matching, the incidences of cardiac death (HR: 0.86; 95% CI: 0.35 to 2.06; p = 0.86 and MACE (HR: 0.93; 95% CI: 0.63 to 1.37; p = 0.71 were still similar in both groups. Furthermore, no significant differences were observed between sirolimus-eluting, paclitaxel-eluting, zotarolimus-eluting, and everolimus-eluting stents regarding the incidence of cardiac death or MACE.This study shows that the efficacy of second-generation DES is comparable to that of first-generation DES for treatment of CTO over 2 years of follow-up.

Report on achievements in fiscal 1998. Venture business growing type consortium - small business creating infrastructure (Research on manufacturing next-generation gas generating agent for air bag); 1998 nendo jisedai air bag yo gas hasseizai no seizo kenkyu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Sodium azide has been used for many years as a gas generating agent for automobiles. However, sodium azide has strong toxicity, and is doubted of carcinogenicity. Bistetrazole having no such a drawback is now noticed as the next-generation gas generating agent, and substitution to gas agents having less toxicity is being advanced worldwide. The present research is intended to develop a method to manufacture bistetrazole (BHT) which does not by-produce wastes in a large amount, is friendly to environment, and economical. Research and development works were performed on manufacturing dicyanide as the raw material by using the electrolytic process and by using the catalytic process, while both processes were found successful. In the reaction to synthesize BHT from the manufactured dicyanide and sodium azide, high crystalline purity and yield as high as 94.5% have been achieved. As a result of having discussed improvement on the one-pot process that synthesizes BHT directly, not going through handling of the produced dicyanide, solution was made on a method to remove impurities, and conditions to produce BHT at high yield were discovered. This new catalytic process provides a total yield of 80%, successfully reducing the manufacturing cost. (NEDO)

Sudetic larch in Germany - Results of provenance and progeny research

Energy Technology Data Exchange (ETDEWEB)

Weisgerber, H. [Forest Centre for Management Planning, Research and Ecology, Hann Muenden (Germany)

1995-12-31

There are only a few older sources of Sudetic larch in Germany. They distinguish themselves by outstanding growth and low susceptibility to canker. This impression was confirmed by results of provenance research. The Sudetic larch tested in comparison with numerous other provenances proved to be fast-growing, site-tolerant, to a large extent insusceptible to canker, with straight but also slightly to moderately curved stems. The Sudetic provenances behave remarkably uniformly as regards these characteristics. In addition to provenance research investigations have been going on for a long time in Germany into individual differences within the Sudetic larch populations. A report is given on the results of progeny tests from free and controlled pollination, using the example of a seed orchard consisting of 54 clones. We point also to possibilities for improving stem quality by selection steps. The results of provenance and progeny research on Sudetic larch are in the meantime being put to use to a large extent in practical forestry. The forest administrations of various federal lands recommend the use of reproductive material of Sudetic origin and from seed orchards. 20 refs, 3 figs

Sudetic larch in Germany - Results of provenance and progeny research

Energy Technology Data Exchange (ETDEWEB)

Weisgerber, H [Forest Centre for Management Planning, Research and Ecology, Hann Muenden (Germany)

1996-12-31

There are only a few older sources of Sudetic larch in Germany. They distinguish themselves by outstanding growth and low susceptibility to canker. This impression was confirmed by results of provenance research. The Sudetic larch tested in comparison with numerous other provenances proved to be fast-growing, site-tolerant, to a large extent insusceptible to canker, with straight but also slightly to moderately curved stems. The Sudetic provenances behave remarkably uniformly as regards these characteristics. In addition to provenance research investigations have been going on for a long time in Germany into individual differences within the Sudetic larch populations. A report is given on the results of progeny tests from free and controlled pollination, using the example of a seed orchard consisting of 54 clones. We point also to possibilities for improving stem quality by selection steps. The results of provenance and progeny research on Sudetic larch are in the meantime being put to use to a large extent in practical forestry. The forest administrations of various federal lands recommend the use of reproductive material of Sudetic origin and from seed orchards. 20 refs, 3 figs

Quality of research results in agro-economy by data mining

Directory of Open Access Journals (Sweden)

Vukelić Gordana

2015-01-01

Full Text Available Data Mining (DM through data in agroeconomy is a scientific method that enables researchers not to go through set research scenarioes that are predetermined assumptions and hypotheses on the basis of insignificant atributes. On the contrary, by data mining detection of these atributes is made possible, in general, those hiden facts that enable setting a hypothesis. The DM method does this by an iterative way, including key atributes and factors and their influence on the quality of agro-resources. The research was conducted on a random sample, by analyzing the quality of eggs. The research subject is the posibility of classifying and predicting significant variablesatributes that determine the level of egg quality. The research starts from the use of Data Mining, as an area of machine studies, which significantly helps researchers in optimizing research. The applied methodology during research includes analyticalsintetic procedures and methods of Data Mining, with a special focus on using Supervised linear discrimination analysis and the Decision Tree. The results indicate significant posibilities of using DM as an additional analytical procedure in performing agroresearch and it can be concluded that it contributes to an improvement in effectiveness and validity of process in performing these researches.

Open circuit V-I characteristics of a coreless ironless electric generator for low density wind power generation

Science.gov (United States)

Razali, Akhtar; Rahman, Fadhlur; Azlan, Syaiful; Razali Hanipah, Mohd; Azri Hizami, Mohd

2018-04-01

Cogging is an attraction of magnetism between permanent magnets and soft ironcore lamination in a conventional electric ironcore generator. The presence of cog in the generator is seen somehow restricted the application of the generator in an application where low rotational torque is required. Cog torque requires an additional input power to overcome, hence became one of the power loss sources. With the increasing of power output, the cogging is also proportionally increased. This leads to the increasing of the supplied power of the driver motor to overcome the cog. Therefore, this research is embarked to study fundamentally about the possibility of removing ironcore lamination in an electric generator. This research deals with removal of ironcore lamination in electric generator to eliminate cog torque. A confinement technique is proposed to confine and focus magnetic flux by introducing opposing permanent magnets arrangement. The concept is then fabricated and experimentally validated to qualify its no-load characteristics. The rotational torque and power output are measured and efficiency is then analyzed. Results indicated that the generator produced RMS voltage of 416VAC at rotational speed of 1762 RPM. Torque required to rotate the generator was at 2Nm for various rotational speed. The generator has shown 30% lesser rotational torque compared to the conventional ironcore type generator due to the absent of cogging torque in the system. Lesser rotational torque required to rotate has made this type of generator has a potential to be used for low wind density wind turbine application.

Genomic research with human samples. Points of view from scientists and research subjects about disclosure of results and risks of genomic research. Ethical and empirical approach.

Science.gov (United States)

Valle Mansilla, José Ignacio

2011-01-01

Biomedical researchers often now ask subjects to donate samples to be deposited in biobanks. This is not only of interest to researchers, patients and society as a whole can benefit from the improvements in diagnosis, treatment, and prevention that the advent of genomic medicine portends. However, there is a growing debate regarding the social and ethical implications of creating biobanks and using stored human tissue samples for genomic research. Our aim was to identify factors related to both scientists and patients' preferences regarding the sort of information to convey to subjects about the results of the study and the risks related to genomic research. The method used was a survey addressed to 204 scientists and 279 donors from the U.S. and Spain. In this sample, researchers had already published genomic epidemiology studies; and research subjects had actually volunteered to donate a human sample for genomic research. Concerning the results, patients supported more frequently than scientists their right to know individual results from future genomic research. These differences were statistically significant after adjusting by the opportunity to receive genetic research results from the research they had previously participated and their perception of risks regarding genetic information compared to other clinical data. A slight majority of researchers supported informing participants about individual genomic results only if the reliability and clinical validity of the information had been established. Men were more likely than women to believe that patients should be informed of research results even if these conditions were not met. Also among patients, almost half of them would always prefer to be informed about individual results from future genomic research. The three main factors associated to a higher support of a non-limited access to individual results were: being from the US, having previously been offered individual information and considering

Technological Change and Employment: Some Results from BLS Research.

Science.gov (United States)

Mark, Jerome A.

1987-01-01

Data from Bureau of Labor Statistics research projects indicate that the pace of technological advancement varies significantly from industry to industry and few employees have been laid off as a result of these changes. Implications for industry concern productivity and retraining. (CH)

The Research of Utilization Hours of Coal-Fired Power Generation Units Based on Electric Energy Balance

Science.gov (United States)

Liu, Junhui; Yang, Jianlian; Wang, Jiangbo; Yang, Meng; Tian, Chunzheng; He, Xinhui

2018-01-01

With grid-connected scale of clean energy such as wind power and photovoltaic power expanding rapidly and cross-province transmission scale being bigger, utilization hours of coal-fired power generation units become lower and lower in the context of the current slowdown in electricity demand. This paper analyzes the influencing factors from the three aspects of demand, supply and supply and demand balance, and the mathematical model has been constructed based on the electric energy balance. The utilization hours of coal-fired power generation units have been solved considering the relationship among proportion of various types of power installed capacity, the output rate and utilization hours. By carrying out empirical research in Henan Province, the utilization hours of coal-fired units of Henan Province in 2020 has been achieved. The example validates the practicability and the rationality of the model, which can provide a basis for the decision-making for coal-fired power generation enterprises.

Meta-analysis in plant pathology: synthesizing research results.

Science.gov (United States)

Rosenberg, M S; Garrett, K A; Su, Z; Bowden, R L

2004-09-01

ABSTRACT Meta-analysis is a set of statistical procedures for synthesizing research results from a number of different studies. An estimate of a statistical effect, such as the difference in disease severity for plants with or without a management treatment, is collected from each study along with a measure of the variance of the estimate of the effect. Combining results from different studies will generally result in increased statistical power so that it is easier to detect small effects. Combining results from different studies may also make it possible to compare the size of the effect as a function of other predictor variables such as geographic region or pathogen species. We present a review of the basic methodology for meta-analysis. We also present an example of meta-analysis of the relationship between disease severity and yield loss for foliar wheat diseases, based on data collected from a decade of fungicide and nematicide test results.

Relationship between people's awareness of environmental capabilities of saving energy, photovoltaic power generation and nuclear power generation

International Nuclear Information System (INIS)

Hashiba, Takashi

2001-01-01

In this research, relationship between people's awareness of environmental capabilities of saving energy, photovoltaic power generation (PV) and nuclear power generation was investigated using questionnaire method. The results showed that saving energy is conducted without reference to its environment preservation effect. However the older people tend to regard saving energy as contribution to environment preservation. The attitude toward usage of PV has a close relationship to awareness of energy environmental concerns. Acceptance of cost sharing for the introducing of wide-scale PV systems to society is related to environment protection image of PV and the attitude toward loss of social convenience lost as a result of saving energy activities. The older people become, the more priority people put on environment protection before the social convenience. There is little relationship between environmental capabilities of nuclear power generation, that never discharge CO 2 on generation, and awareness of energy environmental concerns. (author)

Young generation in Romanian nuclear system - Romanian nuclear organizations implication in nuclear knowledge management at University 'Politehnica' of Bucharest - Results and expectations

International Nuclear Information System (INIS)

Ghizdeanu, E.N.; Dumitrescu, M.C.; Budu, A.R.; Pavelescu, A.O.

2004-01-01

The knowledge management should be assumed by the major players within the nuclear community: government, industry and university. Starting from these problems this article gives an overview about Romanian nuclear knowledge management and the Young Generation implications. In Romania there are many government and non-government nuclear institutions such: CNCAN (Romanian Regulatory Body), ROMATOM (Romanian Atomic Forum), AREN (Romanian 'Nuclear Energy' Association), and companies: SNN ('Nuclearelectrica' SA National Company), CITON (Centre of Technology and Engineering for Nuclear Projects), SCN (Institute for Nuclear Research), ROMAG - PROD (Romanian Heavy Water Plant). All these institutes and companies are sustaining the national nuclear program and promoting the new technologies in the nuclear industry according with CNCAN and ROMATOM regulations. University 'POLITEHNICA' of Bucharest - Power Engineering Faculty - through Nuclear Power Plant Department is the promoter of nuclear knowledge management. It is implied in assuring and maintaining a high-quality training for young staff. Young Generation is implicated in nuclear knowledge management through University 'Politehnica' of Bucharest - Power Engineering Faculty - Nuclear Power Plant Department and AREN (Romanian 'Nuclear Energy' Association). Young Generation Department has special educational programs for attracting and supporting students. It provides adequate information and interacts with potential students. Moreover the article gives results about Romanian nuclear engineers since 1970 till now. An analysis of these data is done. Also it is discussed how University 'Politehnica' of Bucharest, the Romanian Government and the Industry work together to co-ordinate more effectively their efforts to encourage the young generation. (author)

48 CFR 2052.235-70 - Publication of research results.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Publication of research results. 2052.235-70 Section 2052.235-70 Federal Acquisition Regulations System NUCLEAR REGULATORY... recommendations which may have regulatory implications. (c) The principal investigator(s) shall coordinate all...

Report of the research results with University of Tokyo, Nuclear Engineering Research Laboratory's Facilities in fiscal 1983

International Nuclear Information System (INIS)

1984-01-01

Much achievement was obtained also in fiscal 1983 by the common utilization of the nuclear reactor ''Yayoi'' and the linear accelerator in the Nuclear Engineering Research Laboratory, University of Tokyo. These results were summarized, and this report is published. In the utilization of the reactor ''Yayoi'', the period of operation and the maximum output were limited very much, because long cooling period is necessary to prepare for the repair of fuel cladding in the next year. Also foreign research students commonly utilized the reactor ''Yayoi''. The common utilization of the linear accelerator was begun six years ago, and now it is carried out widely and smoothly. The total number of those who commonly utilized the facilities reached 3,179. The summaries of the results of 5 on-pile researches, 17 off-pile researches, and 16 researches using the linear accelerator are collected. The committee meetings and study meetings held in fiscal 1983 are listed. The names of the members of various committees and the names of those in charge of various experiments are given. (Kako, I.)

Dynamic Analysis and Test Results for an STC Stirling Generator

Science.gov (United States)

Qiu, Songgang; Peterson, Allen A.

2004-02-01

Long-life, high-efficiency generators based on free-piston Stirling machines are a future energy-conversion solution for both space and commercial applications. To aid in design and system integration efforts, Stirling Technology Company (STC) has developed dynamic simulation models for the internal moving subassemblies and for complete Stirling convertor assemblies. These dynamic models have been validated using test data from operating prototypes. Simplified versions of these models are presented to help explain the operating characteristics of the Stirling convertor. Power spectrum analysis is presented for the test data for casing acceleration, piston motion, displacer motion, and controller current/voltage during full power operation. The harmonics of a Stirling convertor and its moving components are identified for the STC zener-diode control scheme. The dynamic behavior of each moving component and its contribution to the system dynamics and resultant vibration forces are discussed. Additionally, the effects of a passive balancer and external suspension are predicted by another simplified system model.

Atomic Energy Authority Bill (amendment on exploitation of results of research)

International Nuclear Information System (INIS)

Gray, J.H.N.; Stoddart, D.L.; Lloyd, R.G.

1986-01-01

This amendment arises from legal doubts about the extent of the UKAEA's present powers to exploit the results of its research. The new clause, which amends the Atomic Energy Authority Bill, allows that the Authority has power to exploit commercially by selling, licensing the use of, or otherwise dealing with any intellectual property (patents, trademarks, copyright, registered designs etc) resulting from research carried out by it, or on its behalf, or which is available because of exchange of results or collaboration with others. The 12 minute debate is reported verbatim. The amendment was agreed to. (U.K.)

Kripton-81m generator for ventilation and perfusion

International Nuclear Information System (INIS)

Guillaume, M.; Czichosz, R.; Richard, P.; Fagard, E.

1983-01-01

This paper summarizes the results of research carried out over the last few years at the Cyclotron Research Center, Liege University, towards the development of a krypton 81m generator for clinical use. This study has presented many aspects: its primary concern is optimum production conditions using a compact cyclotron to produce a generator compatible with routine production as well as the supply reliability necessary for clinical experimentation. This resulted in setting up a completely automatic, microprocessor run production station. It defines the most efficient working conditions, and consequently exploitation conditions, due to the knowledge of the daughter element's extraction mechanisms in gas and liquid phases. It proposes different methods to evaluate the generator's fundamental characteristics and to standardize its different clinical uses. The qualitative and quantitative evaluation of all radionuclide species produced simultaneously to the 81 Rb precursor constitutes a new advance in radiopharmaceutical quality control. The problem of sup(81m) Kr dosimetry admistered in liquid or gas phase has been reviewed on the basis of reproducible, optimised experimental results from the latest literature

Workflow Generation from the Two-Hemisphere Model

Directory of Open Access Journals (Sweden)

Gusarovs Konstantīns

2017-12-01

Full Text Available Model-Driven Software Development (MDSD is a trend in Software Development that focuses on code generation from various kinds of models. To perform such a task, it is necessary to develop an algorithm that performs source model transformation into the target model, which ideally is an actual software code written in some kind of a programming language. However, at present a lot of methods focus on Unified Modelling Language (UML diagram generation. The present paper describes a result of authors’ research on Two-Hemisphere Model (2HM processing for easier code generation.

Results of research and development in large-scale research centers as an innovation source for firms

International Nuclear Information System (INIS)

Theenhaus, R.

1978-01-01

The twelve large-scale research centres of the Federal Republic of Germany with their 16,000 employees represent a considerable scientific and technical potential. Cooperation with industry with regard to large-scale projects has already become very close and the know-how flow as well as the contributions to innovation connected therewith are largely established. The first successful steps to utilizing the results of basic research, of spin off and those within the frame of research and development as well as the fulfilling of services are encouraging. However, there is a number of detail problems which can only be solved between all parties concerned, in particular between industry and all large-scale research centres. (orig./RW) [de

Characteristics of a Portable Neutron Generator

International Nuclear Information System (INIS)

Jin, Jeong-Tae; Oh, Byung-Hoon; Chang, Dae-Sik; In, Sang-Yeol; Huh, Sung-Ryul; Hong, Kwang-Pyo

2015-01-01

Neutron generators can be excellent tools for materials analysis, explosive material detection, nuclear weapon detection, and high quality radiography. D + D : 3He + n (2.5 MeV) D + T : 4He + n (14 MeV) Recent commercial neutron generators, fast neutron yield from 10 7 to 10 11 n/s, are produced by several companies and research groups around the world. But limited life time, high price, and frequent troubles make it difficult to develop related application systems by domestic companies or research groups. To remove such problems, it is necessary to develop our own domestic neutron generators. In this presentation, the design and experimental results on the developed small neutron generator are summarized. Experiments on deuterium beam extraction and fast neutron measurement by injecting deuterium beams on a drive-in target are executed. The stable deuterium beam of the energy higher than 100 keV was achieved by introducing metal cover which reduces the effect of metal-vacuum-insulator triple junction. The neutron flux of 5 n/s is measured by RadEye GN gamma Neutron (Thermo scientific) detector with about 200 mm distance and insertion of 40 mm PE plate between neutron source and the detector. The precise detector calibration is not carried out yet, so more detailed experimental results will be summarized at the presentation

Characteristics of a Portable Neutron Generator

Energy Technology Data Exchange (ETDEWEB)

Jin, Jeong-Tae; Oh, Byung-Hoon; Chang, Dae-Sik; In, Sang-Yeol; Huh, Sung-Ryul; Hong, Kwang-Pyo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-10-15

Neutron generators can be excellent tools for materials analysis, explosive material detection, nuclear weapon detection, and high quality radiography. D + D : 3He + n (2.5 MeV) D + T : 4He + n (14 MeV) Recent commercial neutron generators, fast neutron yield from 10{sup 7} to 10{sup 11} n/s, are produced by several companies and research groups around the world. But limited life time, high price, and frequent troubles make it difficult to develop related application systems by domestic companies or research groups. To remove such problems, it is necessary to develop our own domestic neutron generators. In this presentation, the design and experimental results on the developed small neutron generator are summarized. Experiments on deuterium beam extraction and fast neutron measurement by injecting deuterium beams on a drive-in target are executed. The stable deuterium beam of the energy higher than 100 keV was achieved by introducing metal cover which reduces the effect of metal-vacuum-insulator triple junction. The neutron flux of 5 n/s is measured by RadEye GN gamma Neutron (Thermo scientific) detector with about 200 mm distance and insertion of 40 mm PE plate between neutron source and the detector. The precise detector calibration is not carried out yet, so more detailed experimental results will be summarized at the presentation.

Work Values across Generations

Science.gov (United States)

Hansen, Jo-Ida C.; Leuty, Melanie E.

2012-01-01

Mainstream publication discussions of differences in generational cohorts in the workplace suggest that individuals of more recent generations, such as Generation X and Y, have different work values than do individuals of the Silent and Baby Boom generations. Although extant research suggests that age may influence work values, few of the…

A Hybrid Model Ranking Search Result for Research Paper Searching on Social Bookmarking

Directory of Open Access Journals (Sweden)

pijitra jomsri

2015-11-01

Full Text Available Social bookmarking and publication sharing systems are essential tools for web resource discovery. The performance and capabilities of search results from research paper bookmarking system are vital. Many researchers use social bookmarking for searching papers related to their topics of interest. This paper proposes a combination of similarity based indexing “tag title and abstract” and static ranking to improve search results. In this particular study, the year of the published paper and type of research paper publication are combined with similarity ranking called (HybridRank. Different weighting scores are employed. The retrieval performance of these weighted combination rankings are evaluated using mean values of NDCG. The results suggest that HybridRank and similarity rank with weight 75:25 has the highest NDCG scores. From the preliminary result of experiment, the combination ranking technique provide more relevant research paper search results. Furthermore the chosen heuristic ranking can improve the efficiency of research paper searching on social bookmarking websites.

Report of the research results with University of Tokyo, Nuclear Engineering Research Laboratory's Facilities in fiscal 1990

International Nuclear Information System (INIS)

1991-01-01

The report of the results of common utilization of the reactor 'Yayoi' and the electron beam linear accelerator is completed. The Yayoi has been operated almost smoothly, and the research themes by its common utilization and the related research reached 19 cases, 4 cases more than the last year. The utilization of making the best use of the features of the Yayoi was carried out, and good results were obtained. On the other hand, the linear accelerator was reconstructed as a twin linear accelerator, and its common utilization was resumed in October, 1989, consequently, the research themes including those utilizing the twin linear accelerator became 14 cases, and the utilization of good condition has continued. In this report, in addition to the above results of the common utilization of the Yayoi and the linear accelerator, 15 reports of Yayoi Study Group carried out in fiscal 1989 are included. (K.I.)

Sandia's recent results in particle beam fusion research

International Nuclear Information System (INIS)

Yonas, G.

Sandia's latest achievements in the particle beam fusion program are enumerated and pulse power accelerators offering a route to an experimental reactor ignition system are discussed. Four interdependent elements of the program are investigated: 1) power concentration and dielectric breakdown, 2) beam focusing and transport, 3) beam target interaction, and 4) implosion hydrodynamics. Results of the spherical target irradiation experiment on the 1 TW Proto I accelerator and the successful neutron production experiment using the 0.25 TW electron beam from the Rehyd generator are reported. Beam propagation in plasma discharge channels and magnetically insulated vacuum transmission lines have been tested as alternative ways of the power transport. The first-time operation of the Proto II accelerator at 6 TW level is the first step in scaling of intense particle accelerators to higher power levels. (J.U.)

Third-generation imaging sensor system concepts

Science.gov (United States)

Reago, Donald A.; Horn, Stuart B.; Campbell, James, Jr.; Vollmerhausen, Richard H.

1999-07-01

Second generation forward looking infrared sensors, based on either parallel scanning, long wave (8 - 12 um) time delay and integration HgCdTe detectors or mid wave (3 - 5 um), medium format staring (640 X 480 pixels) InSb detectors, are being fielded. The science and technology community is now turning its attention toward the definition of a future third generation of FLIR sensors, based on emerging research and development efforts. Modeled third generation sensor performance demonstrates a significant improvement in performance over second generation, resulting in enhanced lethality and survivability on the future battlefield. In this paper we present the current thinking on what third generation sensors systems will be and the resulting requirements for third generation focal plane array detectors. Three classes of sensors have been identified. The high performance sensor will contain a megapixel or larger array with at least two colors. Higher operating temperatures will also be the goal here so that power and weight can be reduced. A high performance uncooled sensor is also envisioned that will perform somewhere between first and second generation cooled detectors, but at significantly lower cost, weight, and power. The final third generation sensor is a very low cost micro sensor. This sensor can open up a whole new IR market because of its small size, weight, and cost. Future unattended throwaway sensors, micro UAVs, and helmet mounted IR cameras will be the result of this new class.

Are research papers reporting results from nutrigenetics clinical research a potential source of biohype?

Science.gov (United States)

Stenne, R; Hurlimann, T; Godard, Béatrice

2012-01-01

Nutrigenetics is a promising field, but the achievability of expected benefits is challenged by the methodological limitations that are associated with clinical research in that field. The mere existence of these limitations suggests that promises about potential outcomes may be premature. Thus, benefits claimed in scientific journal articles in which these limitations are not acknowledged might stimulate biohype. This article aims to examine whether nutrigenetics clinical research articles are a potential source of biohype. Of the 173 articles identified, 16 contained claims in which clinical applications were extrapolated from study results. The methodological limitations being incompletely acknowledged, these articles could potentially be a source of biohype.

Research on Shaft Subsynchronous Oscillation Characteristics of Parallel Generators and SSDC Application in Mitigating SSO of Multi-Generators

Directory of Open Access Journals (Sweden)

Shen Wang

2015-02-01

Full Text Available Subsynchronous oscillation (SSO of generators caused by high voltage direct current (HVDC systems can be solved by applying supplemental subsynchronous damping controller (SSDC. SSDC application in mitigating SSO of single-generator systems has been studied intensively. This paper focuses on SSDC application in mitigating SSO of multi-generator systems. The phase relationship of the speed signals of the generators under their common mechanical natural frequencies is a key consideration in SSDC design. The paper studies in detail the phase relationship of the speed signals of two generators in parallel under their shared mechanical natural frequency, revealing regardless of whether the two generators are identical or not, there always exists a common-mode and an anti-mode under their common natural frequency, and the phase relationship of the speed signals of the generators depends on the extent to which the anti-mode is stimulated. The paper further demonstrates that to guarantee the effectiveness of SSDC, the anti-phase mode component of its input signal should be eliminated. Based on the above analysis, the paper introduces the design process of SSDC for multi-generator systems and verifies its effectiveness through simulation in Power Systems Computer Aided Design/Electromagnetic Transients including Direct Current (PSCAD/EMTDC.

Chemical-cleaning process evaluation: Westinghouse steam generators. Final report

International Nuclear Information System (INIS)

Cleary, W.F.; Gockley, G.B.

1983-04-01

The Steam Generator Owners Group (SGOG)/Electric Power Research Institute (EPRI) Steam Generator Secondary Side Chemical Cleaning Program, under develpment since 1978, has resulted in a generic process for the removal of accumulated corrosion products and tube deposits in the tube support plate crevices. The SGOG/EPRI Project S150-3 was established to obtain an evaluation of the generic process in regard to its applicability to Westinghouse steam generators. The results of the evaluation form the basis for recommendations for transferring the generic process to a plant specific application and identify chemical cleaning corrosion guidelines for the materials in Westinghouse Steam Generators. The results of the evaluation, recommendations for plant-specific applications and corrosion guidelines for chemical cleaning are presented in this report

Nuclear systems of the future: international forum generation 4 and research and development projects at the Cea; Systemes nucleaires du futur: forum international generation 4 et projets de R et D du CEA

Energy Technology Data Exchange (ETDEWEB)

Carre, F

2003-07-01

To advance nuclear energy to meet future energy needs, ten countries have agreed to develop a future generation of nuclear energy systems, known as Generation 4. A technology road map to guide the Generation 4 effort was begun. This document presents the goals for these nuclear systems and the research programs of the Cea on the gas technology, GT-MHR, VHTR and GFR and the other systems as sodium Fast Neutron reactors, supercritical water and space nuclear. (A.L.B.)

Results from multipoint alignment monitoring using the new generation of amorphous silicon position detectors

Energy Technology Data Exchange (ETDEWEB)

Alberdi, J.; Arce, P.; Barcala, J.M.; Calvo, E. [CIEMAT, 28040 Madrid (Spain); Ferrando, A. [CIEMAT, 28040 Madrid (Spain)], E-mail: antonio.ferrando@ciemat.es; Josa, M.I.; Molinero, A.; Navarrete, J.; Oller, J.C.; Yuste, C. [CIEMAT, 28040 Madrid (Spain); Calderon, A.; Gomez, G.; Gonzalez-Sanchez, F.J.; Martinez-Rivero, C.; Matorras, F.; Rodrigo, T.; Ruiz-Arbol, P.; Sobron, M.; Vila, I.; Virto, A.L. [Instituto de Fisica de Cantabria (IFCA), CSIC-University of Cantabria Santander (Spain)] (and others)

2008-08-11

We present the measured performance of a new generation of large sensitive area (28x28 mm{sup 2}) semitransparent amorphous silicon position detector sensors. More than 100 units have been characterized. They show a very high performance. To illustrate a multipoint application, we present results from the monitoring of five sensors placed in a 5.5-m-long light path.

Results from multipoint alignment monitoring using the new generation of amorphous silicon position detectors

International Nuclear Information System (INIS)

Alberdi, J.; Arce, P.; Barcala, J.M.; Calvo, E.; Ferrando, A.; Josa, M.I.; Molinero, A.; Navarrete, J.; Oller, J.C.; Yuste, C.; Calderon, A.; Gomez, G.; Gonzalez-Sanchez, F.J.; Martinez-Rivero, C.; Matorras, F.; Rodrigo, T.; Ruiz-Arbol, P.; Sobron, M.; Vila, I.; Virto, A.L.

2008-01-01

We present the measured performance of a new generation of large sensitive area (28x28 mm 2 ) semitransparent amorphous silicon position detector sensors. More than 100 units have been characterized. They show a very high performance. To illustrate a multipoint application, we present results from the monitoring of five sensors placed in a 5.5-m-long light path

Generation by Generation Correlation and Path Analysis for Yield ...

African Journals Online (AJOL)

Six advanced generations (F7 - F12) of tomato hybrids were evaluated in the Department of Crop Science Research Farm, University of Nigeria, Nsukka from 2004 to 2008 to estimate the magnitude of character association of yield and yield related attributes in each filial generation. Traits under focus were days to flowering, ...

An assessment of radioactivity level in 51Cr-contaminated dry solid waste generated from a research facility for verification of clearance levels

International Nuclear Information System (INIS)

Nagamatsu, Tomohiro; Yamaoka, Kiyonori; Hanafusa, Tadashi; Ono, Toshiro

2010-01-01

Radioactive waste generated from research laboratories and other facilities is regulated by the Law Concerning Prevention from Radiation Hazards due to Radioisotopes etc. (Prevention Law). However, the Prevention Law does not provide the level of clearance or the procedures to follow for compliance monitoring. To assess radioactivity amounts for making decisions about clearance levels, the radioactivity levels in dry solid semi-combustible wastes generated from biomedical research, such as 51 Cr-release assays, were measured and evaluated. Radioactivity of semi-combustible waste was 1.42-6.32% of the initial level. In comparison, records for the past 8 years in the Shikata Laboratory, Department of Radiation Research, Okayama University Advanced Science Research Center, indicated 7% to 90% of the initial radioactivity remained in the waste and was differed widely among researchers. This study determined an accurate radioactivity level in dry solid waste, which could lead to savings in disposal costs. (author)

Search Results | Page 646 | IDRC - International Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

Results 6451 - 6460 of 9601 ... In Burkina Faso, scientific research, invention and innovation have generated ... Partnership for Africa's Development (NEPAD) under project 102135. ... and sustainable management of common-pool resources.

Some results of applied spallation physics research at Los Alamos

International Nuclear Information System (INIS)

Russell, G.J.; Gilmore, J.S.

1983-01-01

At the Los Alamos National Laboratory, we have an active effort in the general area of Applied Spallation Physics Research. The main emphasis of this activity has been on obtaining basic data relevant to spallation neutron source development, accelerator breeder technology, and validation of computer codes used in these applications. We present here an overview of our research effort and show some measured and calculated results of differential and clean integral experiments

Initial experience with a group presentation of study results to research participants

Directory of Open Access Journals (Sweden)

Bent Stephen

2008-03-01

Full Text Available Abstract Background Despite ethical imperatives, informing research participants about the results of the studies in which they take part is not often performed. This is due, in part, to the costs and burdens of communicating with each participant after publication of the results. Methods Following the closeout and publication of a randomized clinical trial of saw palmetto for treatment of symptoms of benign prostatic hyperplasia, patients were invited back to the research center to participate in a group presentation of the study results. Results Approximately 10% of participants attended one of two presentation sessions. Reaction to the experience of the group presentation was very positive among the attendees. Conclusion A group presentation to research participants is an efficient method of communicating study results to those who desire to be informed and was highly valued by those who attended. Prospectively planning for such presentations and greater scheduling flexibility may result in higher attendance rates. Trial Registration Number Clinicaltrials.gov #NCT00037154

Achievement report on developing superconductor power applied technologies in fiscal 1999 (1). Research and development of superconductor wire materials, research and development of superconductor power generators, research of total systems, research and development of freezing systems, and verification tests; 1999 nendo chodendo denryoku oyo gijutsu kaihatsu seika hokokusho. 1. Chodendo senzai no kenkyu kaihatsu / chodendo hatsudenki no kenkyu kaihatsu / total system no kenkyu / reito system no kenkyu kaihatsu / jissho shiken

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

With an objective to achieve higher efficiency, higher density, and higher stability in power systems, research and development has been performed on superconductor power applied technologies. This paper summarizes the achievements thereof in fiscal 1999. In research and development of the superconductor wire materials, decrease in loss and increase in capacity of the conductors were progressed for the Nb{sub 3}Sn wire material, whereas its mechanical properties and stability were evaluated. In research and development of the superconductor generators, an ultra high speed responding generator was verified of its healthiness in a sudden short circuit test. A linkage test with an operating 77-kV system was performed, wherein verification was given that the superconductor generator can be operated stably against various disturbances. In research and development of the freezing systems, an improved system was structured, which achieved operation of 11,390 hours in a single system as a result of the high reliability of the oil-free structure. In the verification tests, the ultra high speed responding model generator was connect to the freezing system to give such tests as load test, onerous test, actuation test by using the M-G system, and 77-kV system linkage test. The functions, reliability, and durability of the system were verified, and different data were acquired. (NEDO)

Work-Related Attitudes of Czech Generation Z: International Comparison

Directory of Open Access Journals (Sweden)

Jaroslava Kubátová,

2016-12-01

Full Text Available The goal of this article is to present work-related attitudes of a sample of Czech Generation Z and their comparison to the results of an international research study. Currently, there are three important trends influencing the labor market: (1 the origin and development of a ubiquitous working environment, (2 the thriving of coworking centers, and (3 Generation Z's entering the labor market. Instead of traditional jobs, the bearers of human capital tend to choose independent work in an online environment, and often work in coworking centers. Using self-determination theory, we substantiate why they thrive better this way. Based on the results of an international research project focused on work attitudes among Generation Z and the results of a replication study we carried out in the Czech Republic, we attest that members of Generation Z may prefer independent virtual work in coworking centers, too. The total amount of available human capital, the lack of which is pointed out by companies, may grow thanks to new ways of working. Companies, which can use human capital of independent workers, gain a competitive advantage.

Individual and big technology: a comparative attitudinal research to electricity generation from coal and uranium

International Nuclear Information System (INIS)

Midden, C.J.H.

1986-01-01

The basic issue addressed in this research can be formulated as follows: how can peoples reactions to high risk energy technologies be described, analysed and compared. In this study the technologies for electricity generation of nuclear power and coal were chosen for comparison. The thesis gives a general introduction and considers: 1. policy issues involved in the introduction and implementation of large scale technologies. 2. the current electricity supply situation with particular emphasis on the contribution of nuclear power and coal. 3. recent research which has contributed to the formulation of energy policy decisions. The attitudinal framework adopted in this study is discussed in relation to other approaches for the analysis of risk perception, classification of risks and personal and collective decisions about risk taking. (Auth.)

FY 1999 Report on the technical results. Part 1. Development of fuel cell power generation technologies (Research and development of molten carbonate fuel cell power generation system); 1999 nendo nenryo denchi hatsuden gijutsu kaihatsu seika hokokusho. 1. Yoyu tansan'engata nenryo denchi (hatsuden system no kenknyu kaihatsu)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-05-01

This research and development project is aimed at development of the stacking, cooling and operating technologies for the molten carbonate fuel cell power generation systems, to improve service life and performance of these systems and reduce their cost, based on the results obtained so far by the FY 1993. The R and D efforts are directed to (1) technologies for improving stack performance, (2) development of the plant system by operating a 1,000kW class power generation system, and (3) support technologies, e.g., those for stack materials. The item (1) studies 3 stack types, cross-flow, parallel-flow and internal reforming types, including the electrodes, electrolyte-supporting bases and improvement of performance and service life by separator reforming for the cross-flow and parallel-flow types, and installation and operation of a 200kW class stack system for the internal reforming type, where cells are assembled into the system and tested for their operability, after the auxiliary units are PAC-tested. The item (2) installs a 1,000kW class plant, which is operated, after clearing the requirements set by the related laws, e.g., Electric Utility Industry Law, for starting the operation, to achieve the intended targets. The item (3) includes development of the technologies for stack materials, technologies for handling gases produced by coal gasification, and studies on the total systems. (NEDO)

The Research Results of Radioactive Waste Management Technology Center Year 1997/1998

International Nuclear Information System (INIS)

1998-12-01

The research results of Radioactive Waste Management Technology Center, National Atomic Energy Agency of Indonesia year 1997/1998 contain paper as form of research results on radioactive waste management related fields. There were included many aspects such as radioactive waste processing, storage, decontamination, decommissioning, safety and environmental aspects. There are 26 papers indexed individually (ID)

Research of generation mechanism of plasma points in Z-pinch

Energy Technology Data Exchange (ETDEWEB)

Afonin, V I; Garafov, A M; Kovalev, V P; Ostashev, V I; Potapov, A V [All-Russian Research Inst. of Technical Physics, Snezhinsk (Russian Federation); Lazarchuk, V P; Petrov, S I [All-Russian Scientific Research Inst. of Experimental Physics, Sarov (Russian Federation)

1997-12-31

The results of experimental investigations of hot points formed at explosion of thin aluminium wires are reported. The experiments were performed at the fast high-current pulsed generator SIGNAL, which was modernized with the purpose to increase the load current up to 210 kA. The parameters of the plasma in hot points were determined on the base of analysis of the recorded soft x-ray spectra. The estimated electron temperature lies within the range of 0.4-0.9 keV, and the electron density reaches the value of 1023 cm-3. Certain contradictions following from the analysis of the measured data might be caused by significant temperature and density gradients in the hot points. It is shown that the experimental results can be most completely interpreted within the framework of the radiation compression model. (J.U.). 3 figs., 7 refs.

Generative Semantics

Science.gov (United States)

Bagha, Karim Nazari

2011-01-01

Generative semantics is (or perhaps was) a research program within linguistics, initiated by the work of George Lakoff, John R. Ross, Paul Postal and later McCawley. The approach developed out of transformational generative grammar in the mid 1960s, but stood largely in opposition to work by Noam Chomsky and his students. The nature and genesis of…

FY 1977 Annual report on Sunshine Project results. Survey and research on systems utilizing solar energy (Solar thermal power generation systems); 1977 nendo taiyo energy riyo system chosa kenkyu seika hokokusho. Taiyo netsu hatsuden system

Energy Technology Data Exchange (ETDEWEB)

NONE

1978-03-31

This project is aimed at surveys and researches on operation, economic efficiency and performance evaluation of solar thermal power generation systems, and test methods, e.g., for aging the materials for their devices, in order to establish the methods for evaluating their performance. For operation of solar thermal power generation systems, a feasible system is a hybrid with another system, e.g., thermal power or nuclear system. For economic efficiency, heat-storage capacity will be based on power generation for around 4 hours a day for a solar system to be installed in Japan. The construction and light/heat-collecting costs should be reduced to around 300,000 yen/kW and 13,000 to 21,000 yen/m{sup 2}, respectively, in order to keep the power generation cost at around 23 yen/kWH. The energy analysis of solar thermal power generation, based on the data given by the industrial correlation tables, indicates that the total energy required for construction of the system can be recovered in 2 to 3 years. Also outlined are construction of a 1MW pilot plant and its facilities, and designs of the pilot plants with a curved surface or tower type light collector. A total of 12 types of reflection mirrors are screened for establishing the air-exposure testing methods. Methods for treating back surface edges of the reflection mirrors are also investigated. (NEDO)

Spontaneous generation and reversals of mean flows in a convectively-generated internal gravity wave field

Science.gov (United States)

Couston, Louis-Alexandre; Lecoanet, Daniel; Favier, Benjamin; Le Bars, Michael

2017-11-01

We investigate via direct numerical simulations the spontaneous generation and reversals of mean zonal flows in a stably-stratified fluid layer lying above a turbulent convective fluid. Contrary to the leading idealized theories of mean flow generation by self-interacting internal waves, the emergence of a mean flow in a convectively-generated internal gravity wave field is not always possible because nonlinear interactions of waves of different frequencies can disrupt the mean flow generation mechanism. Strong mean flows thus emerge when the divergence of the Reynolds stress resulting from the nonlinear interactions of internal waves produces a strong enough anti-diffusive acceleration for the mean flow, which, as we will demonstrate, is the case when the Prandtl number is sufficiently low, or when the energy input into the internal wavefield by the convection and density stratification are sufficiently large. Implications for mean zonal flow production as observed in the equatorial stratospheres of the Earth, Saturn and Jupiter, and possibly occurring in other geophysical systems such as planetary and stellar interiors will be briefly discussed. Funding provided by the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program through Grant Agreement No. 681835-FLUDYCO-ERC-2015-CoG.

Generation IV and transmutation materials (GETMAT) project: First assessment of selected results

International Nuclear Information System (INIS)

Fazio, Concetta; Serrano, Marta; Gessi, Alessandro; Henry, Jean; Malerba, Lorenzo

2015-01-01

The Generation IV and Transmutation Material (GETMAT) project has been initiated within the 7. EURATOM framework programme with the objective to support the development of innovative reactor designs. Emphasis has been put on the investigation, both in the theoretical and experimental domains, of selected material properties that are cross-cutting among the various Generation IV and Transmutation systems. The selection of the properties to be investigated has been performed by identifying relevant conditions of key components as cores and primary systems. Moreover, taking into account the envisaged conditions of these components it turned out that innovative materials might be a better choice with respect to conventional nuclear grade steels. Therefore, ODS alloys and 9-12 Cr Ferritic/Martensitic (F/M) steels have been selected as reference for the GETMAT project. The R and D activities have been focused on basic characterisation of ODS alloys produced ad hoc for the project and on an extensive PIE programme of F/M steels irradiated in previous programmes. Finally, first principle modelling studies to explain irradiation hardening and embrittlement of F/M alloys were an additional important task. The objective of this manuscript is to make a first assessment of the results obtained within GETMAT. (authors)

The Research Results of Radioactive Waste Management Technology Center Year 1996/1997

International Nuclear Information System (INIS)

Budiman, P.; Martono, H.; Las, T.; Lubis, E.; Mulyanto; Wisnubroto, D. S.; Sucipta

1997-12-01

The research results of Radioactive Waste Management Technology Center, National Atomic Energy Agency of Indonesia year 1996/1997 contain paper as form of research results on radioactive waste management related fields. There were included many aspects such as radioactive waste processing, storage, decontamination, decommissioning, safety and environmental aspects. There are 24 papers and 12 short communications indexed individually(ID)