Market-based product development

DEFF Research Database (Denmark)

Bisp, Søren; Harmsen, Hanne

1997-01-01

A large body of research results on successful product development exists. The results are full of normative advice on how to conduct prod-uct development. At the same time studies have shown that product development practice has only to a very li extent been influenced by these research results...

Interdisciplinary researches for potential developments of drugs and natural products

Directory of Open Access Journals (Sweden)

Arunrat Chaveerach

2017-04-01

Full Text Available Developments of drugs or natural products from plants are possibly made, simple to use and lower cost than modern drugs. The development processes can be started with studying local wisdom and literature reviews to choose the plants which have long been used in diverse areas, such as foods, traditional medicine, fragrances and seasonings. Then those data will be associated with scientific researches, namely plant collection and identification, phytochemical screening by gas chromatography-mass spectrometry, pharmacological study/review for their functions, and finally safety and efficiency tests in human. For safety testing, in vitro cell toxicity by cell viability assessment and in vitro testing of DNA breaks by the comet assay in human peripheral blood mononuclear cells can be performed. When active chemicals and functions containing plants were chosen with safety and efficacy for human uses, then, the potential medicinal natural products will be produced. Based on these procedures, the producing cost will be cheaper and the products can be evaluated for their clinical properties. Thus, the best and lowest-priced medicines and natural products can be distributed worldwide.

Interdisciplinary researches for potential developments of drugs and natural products

Institute of Scientific and Technical Information of China (English)

Arunrat Chaveerach; Runglawan Sudmoon; Tawatchai Tanee

2017-01-01

Developments of drugs or natural products from plants are possibly made,simple to use and lower cost than modern drugs.The development processes can be started with studying local wisdom and literature reviews to choose the plants which have long been used in diverse areas,such as foods,traditional medicine,fragrances and seasonings.Then those data will be associated with scientific researches,namely plant collection and identification,phytochemical screening by gas chromatography-mass spectrometry,pharmacological study/review for their functions,and finally safety and efficiency tests in human.For safety testing,in vitro cell toxicity by cell viability assessment and in vitro testing of DNA breaks by the comet assay in human peripheral blood mononuclear cells can be performed.When active chemicals and functions containing plants were chosen with safety and efficacy for human uses,then,the potential medicinal natural products will be produced.Based on these procedures,the producing cost will be cheaper and the products can be evaluated for their clinical properties.Thus,the best and lowest-priced medicines and natural products can be distributed worldwide.

Leadership mentoring in nursing research, career development and scholarly productivity: A systematic review.

Science.gov (United States)

Hafsteinsdóttir, Thóra B; van der Zwaag, Angeli M; Schuurmans, Marieke J

2017-10-01

Although nursing has been an academic discipline for decades, the infrastructure for nursing research in many countries is still fragile and struggling. Postdoctoral nurses have difficulties developing sustaining careers in nursing research due to lack of career opportunities. Considerable research has been conducted on leadership and mentoring in various areas of nursing. We aimed to systematically review the literature investigating leadership programs and mentoring for postdoctoral nurse researchers, as well as the influence of leadership and mentoring on research productivity, research career development, leadership knowledge and skills, the nurses' health and well-being, staff relationships, work culture and collaboration, salaries and postdoctoral nurses' experiences. A systematic review following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement was conducted. The electronic databases PubMed, CINAHL and EMBASE were searched without time limits for eligible studies up to January 2016. Reference lists of included articles were also searched manually and authors were contacted to inquire about other relevant papers. Two authors independently assessed eligibility of studies for inclusion. Titles and abstracts were matched with the inclusion criteria: studies investigating leadership and mentoring programs for postdoctoral nurses and leadership and mentoring influencing research productivity, and career development; and leadership knowledge and skills and other outcomes. The quality of the studies was appraised using the Centre for Evidence-Based Medicine for surveys, the Critical Appraisal Skill Program Qualitative Appraisal Checklist for qualitative studies, and a critical appraisal list for mixed methods studies. Any disagreements were resolved by consensus. Data were extracted by two reviewers. We screened 1775 titles and abstracts, resulting in 15 studies, which included quantitative, descriptive, qualitative and mixed

Innovation policy & labour productivity growth: Education, research & development, government effectiveness and business policy

NARCIS (Netherlands)

Al Raee, Mueid; Ritzen, Jo; Crombrugghe, Denis de

2017-01-01

This paper examines the relationship between labour productivity growth in non-traditional sectors and "innovation policy" for a cross-section of countries. Innovation policy is characterised by investments in tertiary education and research and development as a percentage of Gross Domestic Product

A three-level approach to quality programs for research, development, and production

International Nuclear Information System (INIS)

Davis, A.H.; Bussolini, P.L.; Geoffrion, R.R.

1986-01-01

A primary mission of the Los Alamos National Laboratory is to develop nuclear weapons systems for the Department of Defense. The activities included in this effort cover a broad spectrum ranging from pure research to routine production. In order to provide a workable framework for a comprehensive quality assurance program for these varied activities, the authors have proposed a three-level structure of quality plans, corresponding to a rough classification of the weapons work into three general categories. These categories are: 1) research into materials and processes, and preliminary development; 2) design, development, and fabrication of prototype components; 3) routine production, analysis, or refinement activities. The first category requires a quality program to assure the validity, reliability, and retrievability of the information developed; this is accomplished by a conscientious application of what is generally recognized as good laboratory practice. The second category requires in addition a strong emphasis on design review and inspection. For the third category, a comprehensive quality program is appropriate, following the general guidelines of NQA-1

Customer-driven Product Development

DEFF Research Database (Denmark)

Sommer, Anita Friis

2011-01-01

look for new ways to gain competitive advantage. In competitive markets there is a tendency of shorter product life cycles, and thus a competitive factor is to keep at pace with the market or even driving the market by developing new products. This research study seeks to investigate Customer......Demand chain management is a research area of increasing attention. It is the undertaking of reacting to customer requirements through a responsive chain going from customers through a focal company towards raw material distributors. With faster growing markets and increasing competition, companies......-driven Product Development (CDPD) from a demand chain management perspective. CDPD is the counterpart to typical research and development processes, which has no direct customer involvement. The proposition is that letting customers initiate and participate in the product development process...

The role of research and development work on the production costs of logging residue chips

International Nuclear Information System (INIS)

Nousiainen, I.

1998-01-01

Purchase of logging residue chips in the early 80s was mainly based on production chains in which the residues were collected with load-carrying tractors at the road-side storage, from which it was chipped or crushed directly into the trailer of a waiting lorry. Six new production chains were developed in the national Bioenergy Research Programme. Three of these are now commercial. Kotimaiset Energiat Pekka Lahti Ky has developed, on the basis of a traditional logging residue production chain, a high-efficiency EVOLUTION intermediate storage chipper, suitable for chipping of logging residues. Oy Logset Ab has developed a new type of lot-chipping chip-harvester, the LOGSET 536C. Nested containers have also been developed for the lot-chipping method. MOHA multi-purpose chipper, in which the chipping and lorry-transportation of chips have been integrated, has also been developed as a part of the research programme. In addition to these, a chipper-container lorry combination, transportation of complete logging residues, and whole- tree skidding have been developed in the project for production of logging residue chips. In the beginning of the 80s the production costs of logging residues at the place of utilization were about 52 FIM/MWh, and the average transportation distance 50 km. In 1992 the production costs, 64 FIM/MWh at the distance of 100 km, was significantly higher than the price of alternative fuels. The lowest production cost level, obtainable by the developed methods is 46 FIM/MWh

Global Dental Research Productivity and Its Association With Human Development, Gross National Income, and Political Stability.

Science.gov (United States)

Allareddy, Veerasathpurush; Allareddy, Veeratrishul; Rampa, Sankeerth; Nalliah, Romesh P; Elangovan, Satheesh

2015-09-01

The objective of this study is to examine the associations between country level factors (such as human development, economic productivity, and political stability) and their dental research productivity. This study is a cross-sectional analysis of bibliometric data from Scopus search engine. Human Development Index (HDI), Gross National Income per capita (GNI), and Failed State Index measures were the independent variables. Outcomes were "Total number of publications (articles or articles in press) in the field of dentistry" and "Total number of publications in the field of dentistry per million population." Non-parametric tests were used to examine the association between the independent and outcome variables. During the year 2013, a total of 11,952 dental research articles were published across the world. The top 5 publishing countries were United States, Brazil, India, Japan, and United Kingdom. "Very High" HDI countries had significantly higher number of total dental research articles and dental research articles per million population when compared to the "High HDI," "Medium HDI," and "Low HDI" countries (p < 0.0001). There was a significant linear relationship between the GNI quartile income levels and outcome metrics (p ≤ 0.007). Countries which were highly politically stable were associated with significantly higher dental research productivity (p < 0.0001). There appears to be a regional concentration of articles with just five countries contributing to over 50% of all articles. The human development and economic development of a country are linearly correlated with dental research productivity. Dental research productivity also increases with increasing political stability of a country. Copyright © 2015 Elsevier Inc. All rights reserved.

The analysis of market knowledge competence effect and research & development (R&D) toward the policy making of new product development

Science.gov (United States)

Purwanggono, Bambang; Sesuko, Agung; Budiawan, Wiwik

2017-11-01

The increasing mobility of people without adequate provision of mass transportation infrastructures makes people choose private transportation like motorcycles. Such circumstances lead the motorcycle manufacturers in Indonesia competing to develop their products to meet the needs of customers. In addition, the new regulation of Central Bank of Indonesia dealing with the credit advances has raised the intense competition of motorcycles industries in Indonesia. One of the ways to win the competition is by developing new and improved products. In developing and improving the products, companies need to consider resource utilization. In this research, researcher utilizes the resources that exist both inside and outside the enterprise such as customer demands, intensity of competition, perception of the importance of market knowledge, importance of market competence, and internal R&D as well as external R&D is expected to develop new products that are superior. The study involved 150 employees as respondents. The method used in the study is Structural Equation Modeling (SEM) with AMOS 20.0 statistical software. The result shows that the demands of the customers and the intensity of competition lead to a positive effect on market knowledge competence, while the perception of the market knowledge importance does not influence the development of new products, and market knowledge competence, internal R&D and external R&D have positive effect on the development of new products.

Case study of information product for strategy research, planning research, and policy research

International Nuclear Information System (INIS)

Yuan Yujun; Zou Lin; Liu Qun; Wang Yongping

2010-01-01

Soft science research is significant and can directly support the decision-making and development. The strategy research, planning research, and policy research each play an important role in soft science research. As the National Strategy of Informatization being implemented and advanced, some progress are made and some special information tools are produced in the process of strengthening the development research with information technologies. At first, the article introduced some cases of information products application, such as the domestic and overseas information products for energy strategy research and planning research and policy research, the governmental management information system for planning and investment, examination and approval and permission system for the planning of the land for construction, China agriculture decision support system and so on, and also gave a brief analysis on the theories and methods, main functions and application status. And then, with a analysis on the features of the works of development planning of China National Nuclear Corporation (CNNC) development, this article gave some suggestions on how to strengthen the development of information system for the development planning of the CNNC. (authors)

CIRP Design 2012 Sustainable Product Development

CERN Document Server

2013-01-01

During its life cycle, a product produces waste that is over 20 times its weight. As such it is critical to develop products that are sustainable. Currently product development processes lack high quality methods and tools that are empirically validated to support development of sustainable products. This book is a compilation of over forty cutting edge international research papers from the 22nd CIRP International Design Conference, written by eminent researchers from 15 countries, on engineering design process, methods and tools, broadly for supporting sustainable product development.   A variety of new insights into the product development process, as well as a host of methods and tools that are at the cutting edge of design research are discussed and explained covering a range of diverse topics. The areas covered include: ·Sustainable design and manufacturing, ·Design synthesis and creativity, ·Global product development and product life cycle management, ·Design for X (safety, reliability, manufactu...

Managing Virtual Product Development team: A Review

Directory of Open Access Journals (Sweden)

Amir Mohammad Colabi

2014-05-01

Full Text Available Although there are many potential benefits associated with the use of virtual product development teams, exploiting these benefits requires an appropriate management. Managing virtual product development team is a critical issue as many of these teams fail to accomplish their goals. Review of previous literature shows that body of knowledge in managing virtual product development teams is fragmented and inconsistent. The main objective of this paper is to categorize the previous research on the subject of virtual product development team management in order to integrate the research into a thematic model and to enable recommendations for future research. So, this study reviews and summarizes empirical research in the field, also conceptual and qualitative papers, experiences, reports and explorative case studies. Results show that there are three fields of research in this area, including: Virtual production and Virtual team in Product Development, Managing virtual team in R&D[1] and product development, Managing global virtual product development teams. In order to organize previous studies in this area, a thematic map is proposed which shows the structure and sequence of research. Finally, a comprehensive discussion on the future directions in this field is proposed.

Decision making in global product development

DEFF Research Database (Denmark)

Søndergaard, Erik Stefan; Ahmed-Kristensen, Saeema

2014-01-01

Many engineering companies experience new challenges when globalising product development. Global product development (GPD) is a relatively nascent research area, and previous research reveals the need for decision support frameworks. This research investigates how decisions are made when compani...

The Effects of Research & Development Funding on Scientific Productivity: Academic Chemistry, 1990-2009.

Directory of Open Access Journals (Sweden)

Joshua L Rosenbloom

Full Text Available This article examines the relationship between Research & Development (R&D funding and the production of knowledge by academic chemists. Using articles published, either raw counts or adjusted for quality, we find a strong, positive causal effect of funding on knowledge production. This effect is similar across subsets of universities, suggesting a relatively efficient allocation of R&D funds. Finally, we document a rapid acceleration in the rate at which chemical knowledge was produced in the late 1990s and early 2000s relative to the financial and human resources devoted to its production.

Applying environmental product design to biomedical products research.

Science.gov (United States)

Messelbeck, J; Sutherland, L

2000-12-01

The principal themes for the Biomedical Research and the Environment Conference Committee on Environmental Economics in Biomedical Research include the following: healthcare delivery companies and biomedical research organizations, both nonprofit and for-profit, need to improve their environmental performance; suppliers of healthcare products will be called upon to support this need; and improving the environmental profile of healthcare products begins in research and development (R&D). The committee report begins with requirements from regulatory authorities (e.g., U.S. Environmental Protection Agency [EPA], the U.S. Food and Drug Administration), and the healthcare delivery sector). The 1998 American Hospital Association and EPA Memorandum of Understanding to reduce solid waste and mercury from healthcare facilities is emblematic of these requirements. The dominant message from the requirements discussion is to ensure that R&D organizations do not ignore customer, environmental, and regulatory requirements in the early stages of product development. Several representatives from healthcare products manufacturers presented their companies' approaches to meeting these requirements. They reported on efforts to ensure that their R&D processes are sensitive to the environmental consequences from manufacturing, distributing, using, and disposing of healthcare products. These reports describe representatives' awareness of requirements and the unique approaches their R&D organizations have taken to meet these requirements. All representatives reported that their R&D organizations have embraced environmental product design because it avoids the potential of returning products to R&D to improve the environmental profile. Additionally, several reports detailed cost savings, sustainability benefits, and improvements in environmental manufacturing or redesign, and increased customer satisfaction. Many companies in healthcare delivery are working to improve environmental

Selective Gaseous Extraction: Research, Development and Training for Isotope Production, Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Bertch, Timothy C, [General Atomics

2014-03-31

General Atomics and the University of Missouri Research Reactor (MURR) completed research and development of selective gaseous extraction of fission products from irradiated fuel, which included training and education of MURR students. The process used porous fuel and after irradiation flowed product gases through the fuel to selectively removed desired fission products with the primary goal of demonstrating the removal of rhodium 105. High removal rates for the ruthenium/rhodium (Ru/Rh), tellurium/iodine (Te/I) and molybdenum/technetium (Mo/Tc) series were demonstrated. The success of this research provides for the reuse of the target for further production, significantly reducing the production of actinide wastes relative to processes that dissolve the target. This effort was conducted under DOE funding (DE-SC0007772). General Atomics objective of the project was to conduct R&D on alternative methods to produce a number of radioactive isotopes currently needed for medical and industry applications to include rhodium-105 and other useful isotopes. Selective gaseous extraction was shown to be effective at removing radioisotopes of the ruthenium/rhodium, tellurium/iodine and molybdenum/technetium decay chains while having trace to no quantities of other fission products or actinides. This adds a new, credible method to the area of certain commercial isotope production beyond current techniques, while providing significant potential reduction of process wastes. Waste reduction, along with reduced processing time/cost provides for superior economic feasibility which may allow domestic production under full cost recovery practices. This provides the potential for improved access to domestically produced isotopes for medical diagnostics and treatment at reduced cost, providing for the public good.

Bioenergy Research Programme. Yearbook 1994. Production of wood fuels

International Nuclear Information System (INIS)

Alakangas, E.

1995-01-01

BIOENERGIA Research Programme is one of energy technology programmes of the Finnish Ministry of Trade and Industry (in 1995 TEKES, Technology Development Center). The aim of Bioenergy Research Programme is to increase the use of economically profitable and environmentally sound bioenergy by improving the competitiveness of present peat and wood fuels. Research and development projects will also develop new economically competitive biofuels and new equipment and methods for production, handling and using of biofuels. The funding for 1994 was nearly 50 million FIM and projects numbered 60. The main goal of the production of wood fuels research area is to develop new production methods in order to decrease the production costs to the level of imported fuels. The total potential of the wood fuel use should be at least 1.0 million toe/a (5.5 million m 3 ). There were 27 projects in 1994 for research on wood fuel production. This part of the yearbook 1994 presents the main results of these projects. The wood reserves do not limit the obtainability of the target. Research and development work has, however, directed to development of equipment and research on wood fuels production chains. Many devices, designed for both separate and integrated production of wood fuels became ready or were becoming ready for prototyping, to be used for production tests. Results of the biomass harvesting and properties research were obtained for utilization in 1994. According to the results it is possible to obtain the desired targets both in integrated and separated production of wood fuels. (author)

Changing Research Practices and Research Infrastructure Development

Science.gov (United States)

Houghton, John W.

2005-01-01

This paper examines changing research practices in the digital environment and draws out implications for the development of research infrastructure. Reviews of the literature, quantitative indicators of research activities and our own field research in Australia suggest that there is a new mode of knowledge production emerging, changing research…

A Causal Model of Faculty Research Productivity.

Science.gov (United States)

Bean, John P.

A causal model of faculty research productivity was developed through a survey of the literature. Models of organizational behavior, organizational effectiveness, and motivation were synthesized into a causal model of productivity. Two general types of variables were assumed to affect individual research productivity: institutional variables and…

Development of a productive research culture in emergency medicine: Report of the outcomes of a research forum.

Science.gov (United States)

Taylor, David McD; Cohen, Donna R; Epstein, Joseph; Freeman, Peter; Gosbell, Andrew D; Judkins, Simon; Mowatt, Elizabeth J M; O'Reilly, Gerard M; Vinen, John

2016-02-01

In recent years, the Australasian College for Emergency Medicine (ACEM) has increasingly focused on the need for high-quality research in emergency medicine (EM). One important initiative was the establishment of the ACEM Foundation, which among other responsibilities, is required to support clinical research through the provision of research funding and other measures. In February 2015, the Foundation held a Research Forum that was attended by the leading EM researchers from Australasia. The Forum aimed to determine how a productive research culture could be developed within the ACEM. Nine key objectives were determined including that research should be a core business of the ACEM and a core activity of the EM workforce, and that EM research should be sustainable and adequately supported. This report describes the background and conduct of the Forum, its recommendations and the way in which they could be implemented. © 2015 Australasian College for Emergency Medicine and Australasian Society for Emergency Medicine.

Co-ordinating Product Developing Activities

DEFF Research Database (Denmark)

Terkelsen, Søren Bendix

1996-01-01

The paper contains a presentation of research methods to be used in case studies in product development and a presentation on how to deal with Design Co-ordination according to litterature......The paper contains a presentation of research methods to be used in case studies in product development and a presentation on how to deal with Design Co-ordination according to litterature...

Beyond Research Productivity: Matching Productivity Measures to Institutional Mission

Directory of Open Access Journals (Sweden)

Patricia Bartholomew

2016-11-01

Full Text Available Aim/Purpose: The aim of this paper is to develop a unified methodology inclusive of the three primary areas of faculty responsibility (teaching, research, and service to calculate departmental productivity that fills the gap in methodological bench-marking tools for overall faculty productivity. Background:\tA disproportionate number of departmental and faculty productivity indices in higher education rely solely on research. Productivity in other areas of faculty workload areas, like teaching and institutional and community service, are either measured separately or ignored all together – even when those activities are institutionally mandated. This does a disservice to those who work in those institutions and skews incentives. Methodology: This paper utilizes a unified methodology inclusive of the three primary areas of faculty responsibility (teaching, research, and service to calculate depart-mental productivity in five disparate departments (English, Biology, Mathematics, Sociology, and Computer Science common to two universities with differing missions (teaching and service. Findings: The results reveal the bias inherent in relying solely on research as a proxy for overall productivity in institutions that have differing missions. Recommendations for Practitioners: Utilizing better metrics informs higher education administrators, promotes better decision-making, and allows incentives to re-align with desired outcomes. Recommendation for Researchers: This paper recommends combing all aspects of faculty workload into a single benchmark index to better measure departmental productivity. Future Research: Further research into improving this simple index is warranted and would include how to account for quality and other facets of productivity.

Knowledge Creation in Clinical Product Development Management Research

DEFF Research Database (Denmark)

Karlsson, Christer; Sköld, Martin

2012-01-01

This paper explores the clinical approach to management research and positions it in relation to other similar approaches. It achieves this by pointing out the most important historical milestones in the development of such approaches. The literature on the approach is mapped, including that on t......This paper explores the clinical approach to management research and positions it in relation to other similar approaches. It achieves this by pointing out the most important historical milestones in the development of such approaches. The literature on the approach is mapped, including...... of the approaches, the paper discusses the research issues to which clinical research is relevant and how the research framework should be designed, then practical issues relating to how to approach the study objects, the design of the research instruments, and the conducting of the field research. Finally...

Development of Production Systems

DEFF Research Database (Denmark)

Christiansen, Thomas Bøhm

1997-01-01

This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by......This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by...

Research and development program of hydrogen production system with high temperature gas-cooled reactor

International Nuclear Information System (INIS)

Miyamoto, Y.; Shiozawa, S.; Ogawa, M.; Inagaki, Y.; Nishihara, T.; Shimizu, S.

2000-01-01

Japan Atomic Energy Research Institute (JAERI) has been developing a hydrogen production system with a high temperature gas-cooled reactor (HTGR). While the HTGR hydrogen production system has the following advantages compared with a fossil-fired hydrogen production system; low operation cost (economical fuel cost), low CO 2 emission and saving of fossil fuel by use of nuclear heat, it requires some items to be solved as follows; cost reduction of facility such as a reactor, coolant circulation system and so on, development of control and safety technologies. As for the control and safety technologies, JAERI plans demonstration test with hydrogen production system by steam reforming of methane coupling to 30 Wt HTGR, named high temperature engineering test reactor (HTTR). Prior to the demonstration test, a 1/30-scale out-of-pile test facility is in construction for safety review and detailed design of the HTTR hydrogen production system. Also, design study will start for reduction of facility cost. Moreover, basic study on hydrogen production process without CO 2 emission is in progress by thermochemical water splitting. (orig.)

Increasing Research Productivity and Professional Development in Psychology With a Writing Retreat.

Science.gov (United States)

Stanley, Ian H; Hom, Melanie A; Chu, Carol; Joiner, Thomas E

2017-09-01

Writing is a core feature of the training requirements and career demands of psychology faculty members and graduate students. Within academic psychology, specifically, writing is vital for the generation of scientific knowledge through manuscripts and grant applications. Although resources exist regarding how to improve one's writing skills, few models have been described regarding how to promote a culture of writing productivity that realizes tangible deliverables, such as manuscripts and grant applications. In this article, we discuss the rationale, model, and initial outcome data of a writing retreat developed and implemented to increase research productivity among psychology faculty and trainees. We also review best practices for conducting writing retreats and identify key areas for future SoTL on advancing writing.

Review on research of suppression male fertility and male contraceptive drug development by natural products.

Science.gov (United States)

Bajaj, Vijay Kumar; Gupta, Radhey S

2013-08-01

Male contraceptive development in the present scenario is most viable aspect of research due to uncontrolled population growth in the world. In this respect investigators are busy to find out a safe male contraceptive drug. Researchers have started their finding for a suitable drug from natural sources because these are safe and easily acceptable for common man, most of natural sources are plants and their products. In this review 137 plants and their effects on reproduction and reproductive physiology are summarized. Some of them have intense effect on male reproductive system and do not produce any side effects. Reproductive toxicological studies are also important aspects of these kinds of researches, so it is important that drugs are safe and widely acceptable. An ideal male contraceptive can influence semen, testes, hormone level, accessory reproductive organs and general physiology of animals and produced some alterations. Many plants in this review are showing antifertility as well as antispermatogenic effects, so these may be used for further study for contraceptives development but it is important to find out the mechanism of reaction and further laboratory and clinical research on some plants are needed for final male contraceptive drug development. In conclusion this review will help for finding suitable plant products for male contraceptive clinical and laboratory studies.

Service-oriented product development strategies

DEFF Research Database (Denmark)

Tan, Adrian Ronald

Manufacturing companies have traditionally focused their efforts on designing, developing and producing physical products for the market. Today, global competition, outsourcing and legislation commend that companies take greater responsibility of their products. This is driving some manufacturers...... to shift their business strategies from selling products (e.g. photocopying machines) to the provision of services (e.g. document services). Instead of the product itself, the activity and knowledge associated with the use of the product is perceived to be of more value to customers. In the research...... community, service-oriented approaches that embrace this change of business focus from individual products to total integrated customer solutions are termed Product/Service-Systems (PSS). The research in this thesis addresses the systematic design and development of PSS solutions in manufacturing firms...

Barriers towards integrated product development

DEFF Research Database (Denmark)

Sommer, Anita Friis; Dukovska-Popovska, Iskra; Steger-Jensen, Kenn

2014-01-01

The basis for product development in many large industrial companies is a traditional project management method positing non-overlapping phases, independent activities, and a dedicated project team. Research findings indicate that integrated product development methods increase performance compared...

Matching food service products to consumer demands through product development alliances and modularisation

DEFF Research Database (Denmark)

Olsen, Johanne Rønnow

2009-01-01

of product development managers (with the main themes food trends, meal solutions and product development alliances), as well as data from sensory studies of interactions between meal components. Apart from the quality cycle mentioned above, the research has generated the tools listed below to be applied......, more specifically, meal solutions. The results of this research contribute to the knowledge base on product development in the food industry, mainly regarding quality, product development alliances and modularisation,and fill several gaps in the literature. Future research should focus on further...... in the composition of meal solutions and, therefore cannot control all processing steps and interactions with other meal components. In this project, it is proposed that cooperation between food producers on product development (product development alliances) in relation to meal solutions can improve the quality...

Assessing Digital Student Productions, a Design-Based Research Study on the Development of a Criteria-Based Assessment Tool for Students’ Digital Multimodal Productions

DEFF Research Database (Denmark)

Hoffmeyer, Mikkeline; Jensen, Jesper Juellund; Olsen, Marie Veisegaard

2017-01-01

Digital multimodal production is becoming increasingly important as a 21st century skill and as a learning condition in school (K-12). Moreover, there is a growing attention to the significance of criteria-based assessment for learning. Nevertheless, assessment of students’ digital multimodal...... productions is often vague or lacking. Therefore, the research project aims at developing a tool to support assessment of student’s digital multimodal productions through a design-based research method. This paper presents a proposal for issues to be considered through a prototyping phase, based on interviews...

Developing and promoting OKP production system: a JIT production planning approach

Science.gov (United States)

Samavati, Mehran

2011-10-01

The role of production in competitive system of market on one hand and the changing conditions of market on the other hand has caused the need for more developed planning in such environments. The general purpose of the present research is to realize One-of- a- Kind- Product model (OKP) that is developed in two stages. In OKP model presented in 1994 only one sample of each product is produced and only one production method is considered for each product. In order to make OKP model more real and to use it in promoting more production methods, the following developments were made in this research: 1-First Development: Considering various methods for producing each product. 2-Second Development: Producing more than one sample of each product, while considering various production methods for each product. These models promoted OKP model of 1994. They can be used in more diversified production methods in order to promote them. In present model, while describing the main OKP model new models are provided as well. The significance of OKP has been described in Introduction

New Product Development Based on Demand

OpenAIRE

Davis-Krook, Shelby

2015-01-01

The purpose of this thesis was to determine how to develop a new product based on demand within a target market for an international company. Specifically looking at developing a new product line in an already developed brand, Alpha Performance. The research I have conducted in the following topics may help Alpha Performance if they choose to use my findings to create a one of a kind woman’s clothing line based on the demands of the Finnish market: target market research, product demand rese...

Livestock Production - Future Directions and Priority Research Areas

Energy Technology Data Exchange (ETDEWEB)

Robinson, P.H., E-mail: phrobinson@ucdavis.edu [Department of Animal Science, University of California, Davis, CA (United States)

2014-07-15

While specific issues facing ruminant production differ in detail between developed and developing countries, the general constraints and challenges suggest that common research interests will continue to exist. The need to increase outputs of ruminant meat and milk products differ sharply between the developed and developing world, although a need to increase animal productivity is evident in both, albeit primarily to increase product output in the developing world but to decrease environmental impacts of food producing ruminants in the developed world. The largest single limitation to increasing productivity of ruminants in the low digestibility of the structural carbohydrates which comprise a large proportion of their diets. Research on actions of secondary compounds in ruminal metabolism is required to avoid their negative effects and harvest the benefits of their positive effects. Domesticated ruminants have historically provided a substantial portion of the world's supplies. However if that is to continue, ways must be found to increase digestibility of their primary feedstocks, increase the 'healthfulness' of their products to humans, and decrease the environmental impact of their production systems.

Livestock Production - Future Directions and Priority Research Areas

International Nuclear Information System (INIS)

Robinson, P.H.

2014-01-01

While specific issues facing ruminant production differ in detail between developed and developing countries, the general constraints and challenges suggest that common research interests will continue to exist. The need to increase outputs of ruminant meat and milk products differ sharply between the developed and developing world, although a need to increase animal productivity is evident in both, albeit primarily to increase product output in the developing world but to decrease environmental impacts of food producing ruminants in the developed world. The largest single limitation to increasing productivity of ruminants in the low digestibility of the structural carbohydrates which comprise a large proportion of their diets. Research on actions of secondary compounds in ruminal metabolism is required to avoid their negative effects and harvest the benefits of their positive effects. Domesticated ruminants have historically provided a substantial portion of the world's supplies. However if that is to continue, ways must be found to increase digestibility of their primary feedstocks, increase the 'healthfulness' of their products to humans, and decrease the environmental impact of their production systems

New product development: A batik multifunctional chair

Science.gov (United States)

Indrawati, Sri; Sukmaningsih, Nias

2017-11-01

The biggest challenge facing by Batik industry in ASEAN Economic Community (AEC) era is the greater number of fashion competitors both domestically and internationally. Based on that condition, the development of new product variants by considering product performance and price is needed. This research was conducted to develop batik products with a new target market. Products that being developed is batik multifunctional chair using integrated value engineering and analytic hierarchy process methods. This research has been done in several stages, ie. Information stage, creative stage, value analysis and product prototyping. The results of this research shows that the batik multifunctional chair product criteria are aesthetic (29%), multifunctional (34%) and ergonomic (37%). There are three new product design alternatives that successfully being developed. Based on value analysis, the product design alternatives that have the highest value is alternative design 2, the value is 2,37. The production cost for this design is Rp. 500.000,-. Alternative design 2 specification are using Mahoni wood, Batik parang rusak pattern with natural coloring process, can be used as table and fit with customer's body anthropometry. Then a batik multifunctional chair prototype is developed based on the best alternative design.

Process-Product Research: A Cornerstone in Educational Effectiveness Research

Science.gov (United States)

Creemers, Bert; Kyriakides, Leonidas

2015-01-01

This article links the contribution of process-product studies in developing the theoretical framework of educational effectiveness by pointing out the importance of teacher behavior in the classroom. The role that Jere Brophy played in this evolving research is described within the various phases of teacher effectiveness research. Process-product…

Profile and scientific production of Brazilian National Council of Technological and Scientific Development researchers in Pediatrics.

Science.gov (United States)

Oliveira, Maria Christina L; Martelli, Daniella Reis B; Pinheiro, Sergio Veloso; Miranda, Debora Marques; Quirino, Isabel Gomes; Leite, Barbara Gusmão L; Colosimo, Enrico Antonio; e Silva, Ana Cristina S; Martelli-Júnior, Hercílio; Oliveira, Eduardo Araujo

2013-09-01

To evaluate the profile and the scientific production of researchers in Pediatrics with scholarship from the National Counsel of Technological and Scientific Development. The Lattes curricula of 34 researchers in Pediatrics with active scholarships, from 2006 to 2008 were included in the analysis. The variables of interest were: gender, affiliation, time since PHD, tutoring of undergraduate students, mentorship of masters and doctors, scientific production and the papers' impact. In a total of 411 researchers in Medicine, 34 (8%) belonged to Pediatrics. Males (77%) and scholars in the category 2 of productivity (62%) prevailed. Three states of Brazil were responsible for approximately 90% of the researchers: São Paulo (53%), Minas Gerais (21%), and Rio Grande do Sul (15%). During their academic career, the Pediatrics researchers have published 3,122 articles with a median of 89 articles per researcher (interquartile range - IQ=51-119). Of the total, 40 and 59% articles were indexed in the Web of Science and Scopus databases, respectively. The Pediatrics researchers have published papers in 599 journals with a median impact factor of 2.35 (IQ=1.37-3.73) for the 323 indexed journals. The Pediatrics researchers have a relevant scientific output from the quantity point of the view, but there is a need to improve quality.

Research on the Development of E-commerce Model of Agricultural Products

Directory of Open Access Journals (Sweden)

Huo Yaping

2017-01-01

Full Text Available In recent years, electronic commerce of agricultural products has developed rapidly. In the development process of electronic commerce of agricultural products,many classic cases and business models have emerged. Such as tootoo industrial commune model (product drive type, Original life model (marketing driven type, Suichang model (service platform type. The author analyzes and compares each model from 7 aspects, and summarizes their differences and links. Finally, The author puts forward suggestions on the development of electronic commerce of agricultural products in china.

Universal real-time control framework and Internet of Things for fast-paced research and development based production environments

KAUST Repository

Chaoui, Hicham

2017-05-13

This paper introduces a universal real-time control platform for complex research and development (R&D) based products design. The inherent complexity in R&D projects makes products development a difficult task to undertake. The use of state of the art development tools for modeling, simulation, and hardware-in-the-loop (HIL) validation contributes to a complexity reduction. However, R&D projects still require significant development time since many design iterations are usually necessary before final solution, which increases the cost. In most R&D processes, these tools are not used beyond rapid prototyping since development for mass production is usually performed in another environment, using different tools. This paper presents a fast and cost effective way of R&D-based products development, speeding-up time to market.

Universal real-time control framework and Internet of Things for fast-paced research and development based production environments

KAUST Repository

Chaoui, Hicham; Aljarboua, Abdullah Abdulaziz; Miah, Suruz

2017-01-01

This paper introduces a universal real-time control platform for complex research and development (R&D) based products design. The inherent complexity in R&D projects makes products development a difficult task to undertake. The use of state of the art development tools for modeling, simulation, and hardware-in-the-loop (HIL) validation contributes to a complexity reduction. However, R&D projects still require significant development time since many design iterations are usually necessary before final solution, which increases the cost. In most R&D processes, these tools are not used beyond rapid prototyping since development for mass production is usually performed in another environment, using different tools. This paper presents a fast and cost effective way of R&D-based products development, speeding-up time to market.

Evaluating the Productivity of VA, NIH, and AHRQ Health Services Research Career Development Awardees.

Science.gov (United States)

Finney, John W; Amundson, Erin O; Bi, Xiaoyu; Cucciare, Michael A; Eisen, Seth A; Finlay, Andrea K; Halvorson, Max A; Hayashi, Ko; Owens, Douglas K; Maisel, Natalya C; Timko, Christine; Weitlauf, Julie C; Cronkite, Ruth C

2016-04-01

To evaluate the academic advancement and productivity of Department of Veterans Affairs Health Services Research and Development (HSR&D) Career Development Award (CDA) program recipients, National Institutes of Health (NIH) K awardees in health services research (HSR), and Agency for Healthcare Research and Quality (AHRQ) K awardees. In all, 219 HSR&D CDA recipients from fiscal year (FY) 1991 through FY2010; 154 NIH K01, K08, and K23 awardees FY1991-FY2010; and 69 AHRQ K01 and K08 awardees FY2000-FY2010 were included. Most data were obtained from curricula vitae. Academic advancement, publications, grants, recognition, and mentoring were compared after adjusting for years since award, and personal characteristics, training, and productivity prior to the award. No significant differences emerged in covariate-adjusted tenure-track academic rank, number of grants as primary investigator (PI), major journal articles as first/sole author, Hirsch h-index scores, likelihood of a journal editorship position or membership in a major granting review panel, or mentoring postgraduate researchers between the HSR&D CDA and NIH K awardees from FY1991-FY2010, or among the three groups of awardees from FY2000 or later. Among those who reported grant funding levels, HSR&D CDAs from FY1991-2010 had been PI on more grants of $100,000 than NIH K awardees. HSR&D CDAs had a higher mean number of major journal articles than NIH K awardees from FY1991-2010. Findings show that all three HSR career development programs are successfully selecting and mentoring awardees, ensuring additional HSR capacity to improve the quality and delivery of high-value care.

What and how about customer-driven product development

DEFF Research Database (Denmark)

Sommer, Anita Friis; Steger-Jensen, Kenn

2012-01-01

Collaborative product development is of increasing interest as customer demands increases while product life cycles decrease. This study investigates how suppliers handle active customers including managing customer requests for new products and customer-driven product development. A large...... structured literature review of the top 20 supply chain management journals is conducted to explore existing literature. Research states the importance of active integration in product development, but does not provide answers to how suppliers can manage this in practice. A 2x2 matrix is developed describing...... the differing views on customers in existing research including customer actions on both new and existing products....

MEASURING PRODUCTIVITY OF SOFTWARE DEVELOPMENT TEAMS

Directory of Open Access Journals (Sweden)

Goparaju Purna Sudhakar

2012-02-01

Full Text Available This paper gives an exhaustive literature review of the techniques and models available tomeasure the productivity of software development teams. Definition of productivity, measuringindividual programmer’s productivity, and measuring software development team productivity arediscussed. Based on the literature review it was found that software productivity measurement canbe done using SLOC (Source Lines of Code, function points, use case points, object points, andfeature points. Secondary research findings indicate that the team size, response time, taskcomplexity, team climate and team cohesion have an impact on software development teamproductivity. List of factors affecting the software development team productivity are studied andreviewed.

Time management strategies for research productivity.

Science.gov (United States)

Chase, Jo-Ana D; Topp, Robert; Smith, Carol E; Cohen, Marlene Z; Fahrenwald, Nancy; Zerwic, Julie J; Benefield, Lazelle E; Anderson, Cindy M; Conn, Vicki S

2013-02-01

Researchers function in a complex environment and carry multiple role responsibilities. This environment is prone to various distractions that can derail productivity and decrease efficiency. Effective time management allows researchers to maintain focus on their work, contributing to research productivity. Thus, improving time management skills is essential to developing and sustaining a successful program of research. This article presents time management strategies addressing behaviors surrounding time assessment, planning, and monitoring. Herein, the Western Journal of Nursing Research editorial board recommends strategies to enhance time management, including setting realistic goals, prioritizing, and optimizing planning. Involving a team, problem-solving barriers, and early management of potential distractions can facilitate maintaining focus on a research program. Continually evaluating the effectiveness of time management strategies allows researchers to identify areas of improvement and recognize progress.

Research Productivity: Some Paths Less Travelled

Science.gov (United States)

Martin, Brian

2009-01-01

Conventional approaches for fostering research productivity, such as recruitment and incentives, do relatively little to develop latent capacities in researchers. Six promising unorthodox approaches are the promotion of regular writing, tools for creativity, good luck, happiness, good health and crowd wisdom. These options challenge conventional…

Wood products research in the USA

Science.gov (United States)

Theodore Wegner

2010-01-01

Forest biomass conversion to biofuels and other value-added co-products; hyper-performance advanced composites custom tailored to end use requirements; advanced high performance wood-based structures; and nanomaterials and nano-enable high performance products from wood represent important research and development investment areas for the successful transformation of...

Profile and scientific production of Brazilian National Council of Technological and Scientific Development researchers in Pediatrics

Directory of Open Access Journals (Sweden)

Maria Christina L. Oliveira

2013-09-01

Full Text Available OBJECTIVE: To evaluate the profile and the scientific production of researchers in Pediatrics with scholarship from the National Counsel of Technological and Scientific Development. METHODS: The Lattes curricula of 34 researchers in Pediatrics with active scholarships, from 2006 to 2008 were included in the analysis. The variables of interest were: gender, affiliation, time since PHD, tutoring of undergraduate students, mentorship of masters and doctors, scientific production and the papers' impact. RESULTS: In a total of 411 researchers in Medicine, 34 (8% belonged to Pediatrics. Males (77% and scholars in the category 2 of productivity (62% prevailed. Three states of Brazil were responsible for approximately 90% of the researchers: São Paulo (53%, Minas Gerais (21%, and Rio Grande do Sul (15%. During their academic career, the Pediatrics researchers have published 3,122 articles with a median of 89 articles per researcher (interquartile range - IQ=51-119. Of the total, 40 and 59% articles were indexed in the Web of Science and Scopus databases, respectively. The Pediatrics researchers have published papers in 599 journals with a median impact factor of 2.35 (IQ=1.37-3.73 for the 323 indexed journals. CONCLUSIONS: The Pediatrics researchers have a relevant scientific output from the quantity point of the view, but there is a need to improve quality.

Space flight research leading to the development of enhanced plant products: Results from STS-94

Science.gov (United States)

Stodieck, Louis S.; Hoehn, Alex; Heyenga, A. Gerard

1998-01-01

Products derived from plants, such as foods, pharmaceuticals, lumber, paper, oils, etc., are pervasive in everyday life and generate revenues in the hundreds of billions of dollars. Research on space-grown plants has the potential to alter quantities, properties and types of plant-derived products in beneficial ways. Research on space grown plants may help expand the utilization of this resource for Earth based benefit to an even greater extent. The use of space flight conditions may help provide a greater understanding and ultimate manipulation of the metabolic and genetic control of commercially important plant products. Companies that derive and sell plant products could significantly benefit from investing in space research and development. A flight investigation was conducted on the Shuttle mission STS-94 to establish the initial experimental conditions necessary to test the hypothesis that the exposure of certain plant forms to an adequate period of microgravity may divert the cell metabolic expenditure on structural compounds such as lignin to alternative secondary metabolic compounds which are of commercial interest. Nine species of plants were grown for 16 days in the Astro/Plant Generic Bioprocessing Apparatus (Astro/PGBA) under well-controlled environmental conditions. Approximately half of the plant species exhibited significant growth comparable with synchronous ground controls. The other flight plant species were stunted and showed signs of stress with the cause still under investigation. For the plants that grew well, analyses are underway and are expected to demonstrate the potential for space flight biotechnology research.

US Army Medical Research and Development Report.

Science.gov (United States)

1979-10-01

RI) US ARMY MEDICAL RESEARCH AND DEVELOPMENT REPORT. Colonel/John Jr DTIC JUL 1 5 1980; A USL &MY MEDICAL BIOENGINEERING RESEARCH AND DEVELOPMENT...pollutants in water or soil . Pollutant by-products and breakdown products in water, air or soil will be isolated, characterized, and quantified. Where...determination of selected low-level pollutants io soil and water. Degradation products and secondary pollutants arising from munitions manufacture or pest

Nigerian Educational Research For Sustainable Development ...

African Journals Online (AJOL)

Education and research controls the development of any nation because no nation can rise above the products of its educational system. However, a number of problems face our educational and national development in general. The solution to such problem lies in research . educational research for sustainable ...

Customized products and cloud service information system development research

Directory of Open Access Journals (Sweden)

Hung Chien-Wen

2017-01-01

Full Text Available This study presents a cloud service customized product information system to enable businesses to provide customized product marketing on the Internet to meet consumer demand for customized products. The cloud service of the information system development strategic framework proposed in this study contains three elements: (1 e-commerce services, (2 promotion type modules, and (3 cloud services customized promotional products. In this study, a mining cloud information system to detect customer behavior is proposed. The association rules from relational database design are utilized to mine consumer behavior to generate cross-selling proposals for customer products and marketing for a retailing mall in Taiwan. The study is composed of several parts, as follows. A market segment and application of association rules in data exploration techniques (Association Rule Mining and sequence-like exploration (Sequential Pattern Mining, efficient analysis of customers, consumer behavior, identification of candidates for promotional products, and using cloud service delivery and evaluation of targets to evaluate candidates for promotional products for production. However, in addition to cloud service customized promotional products, the quantity of promotional products sales varies for different customers. We strive to achieve increased customer loyalty and profits through the use of active cloud service customized promotional products.

Integrated product development: Competencies meet and products arise

DEFF Research Database (Denmark)

Jensen, Birger Boutrup; Stacey, Julia

2000-01-01

and process competencies throughout the whole development process. Of course, this is easier said than done but integrating various competencies into the product development prepares the ground for a better balance and consequently more products. Databases, for instance are a good example of a tool that can...... the development process and diminish the risk of inventing sliced bread once again. Furthermore the databases may be used as a foundation for a more effective and frictionless communication across departments. The project has its starting point in case studies of three Danish food companies. A research group...

Strategies for fuel cell product development. Developing fuel cell products in the technology supply chain

International Nuclear Information System (INIS)

Hellman, H.L.

2004-01-01

Due to the high cost of research and development and the broad spectrum of knowledge and competences required to develop fuel cell products, many product-developing firms outsource fuel cell technology, either partly or completely. This article addresses the inter-firm process of fuel cell product development from an Industrial Design Engineering perspective. The fuel cell product development can currently be characterised by a high degree of economic and technical uncertainty. Regarding the technology uncertainty: product-developing firms are more often then not unfamiliar with fuel cell technology technology. Yet there is a high interface complexity between the technology supplied and the product in which it is to be incorporated. In this paper the information exchange in three current fuel cell product development projects is analysed to determine the information required by a product designer to develop a fuel cell product. Technology transfer literature suggests that transfer effectiveness is greatest when the type of technology (technology uncertainty) and the type of relationship between the technology supplier and the recipient are carefully matched. In this line of thinking this paper proposes that the information required by a designer, determined by the design strategy and product/system volume, should be met by an appropriate level of communication interactivity with a technology specialist. (author)

Research Productivity and Academics' Conceptions of Research

Science.gov (United States)

Brew, Angela; Boud, David; Namgung, Sang Un; Lucas, Lisa; Crawford, Karin

2016-01-01

This paper asks the question: do people with different levels of research productivity and identification as a researcher think of research differently? It discusses a study that differentiated levels of research productivity among English and Australian academics working in research-intensive environments in three broad discipline areas: science,…

Procurement management in scientific research and production project

International Nuclear Information System (INIS)

Wan Yi

2008-01-01

To meet the requirement of development trend of scientific research and production, it is necessary to incorporate the modern procurement management theory in the whole procurement process for the items used in scientific research and production.This paper provided some suggestions to improve the procurement management by introducing the experiences in the application of the modern procurement management methods in the procurement of parts production. (author)

Spelling the Domain of Sustainable Product Innovation Research

DEFF Research Database (Denmark)

Boks, Casper; McAloone, Tim C.

2009-01-01

on research methodologies used (case study research, explorative research, descriptive or prescriptive research), case studies analysed, and theories used (such as innovation theory, institutional theory, organisational learning, entrepreneurship, technology management, or design theory). A recent survey......- and user thinking, product stewardship, environmental management of industrial systems, integrated product policies, environmental technology transfer, sustainable consumption and corporate social responsibility. A related question is to determine how scientific research on the PhD level has been......, including learning from historical developments, towards future research strategies and their industrial application....

Development of Production Control in Small Batch Production

Directory of Open Access Journals (Sweden)

Németh Péter

2016-01-01

Full Text Available Our aim with this paper is to develop a new performance measurement and control system for small batch production in the automotive industry. For this reason, we present our previous research results for warehouse performance measurement and adopt its methodology to production control. The proposed method is based on artificial intelligence (neural networks.

Radioisotope production experience at the Cintichem 5-MW research reactor

International Nuclear Information System (INIS)

McGovern, J.J.

1993-01-01

The Cintichem radiochemical production facility was constructed in the late 1950s and became operational in October of 1961. The facility was originally designed and constructed by Union Carbide Corporation for research and development of nuclear technology with the ultimate objective of exploiting it commercially. Research projects were conducted in the fields of direct energy conversion for the production of electric power and chemical synthesis, neutron spectrometry, nuclear fuel cycle development, and radiochemical production. Radiochemical production for medical applications was the only development project that was successfully commercialized

The paradox of scientific excellence and the search for productivity in pharmaceutical research and development.

Science.gov (United States)

Grasela, T H; Slusser, R

2014-05-01

Scientific advances in specialty areas are proceeding at a rapid rate, but the research and development enterprise seems unable to take full advantage. Harnessing the steady stream of knowledge and inventions from different disciplines is the critical management issue of our time. This article suggests a framework for a management-directed effort to improve productivity by enhancing interdisciplinary collaboration.

Marketing research: Pathway to optimal market oriented products ...

African Journals Online (AJOL)

This paper examines the role of marketing research as pathway to developing optimal market oriented products. The objectives of this paper among others are to (i) Establish whether the use of marketing research has effect on new product adoption process by consumers (ii) Find out if there is any relationship between the ...

Integrating Product and Technology Development

DEFF Research Database (Denmark)

Meijer, Ellen Brilhuis; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2016-01-01

.g. managing dependencies) and opportunities (e.g. streamlining development). This paper presents five existing reference models for technology development (TD), which were identified via a systematic literature review, where their possible integration with product development (PD) reference models......Although dual innovation projects, defined in this article as the concurrent development of products and technologies, often occur in industry, these are only scarcely supported methodologically. Limited research has been done about dual innovation projects and their inherent challenges (e...... was investigated. Based on the specific characteristics desired for dual innovation projects, such as integrated product development and coverage of multiple development stages, a set of selection criteria was employed to select suitable PD and TD reference models. The integration and adaptation of the selected...

7 CFR 924.45 - Research and development.

Science.gov (United States)

2010-01-01

... establishment of production research, and marketing research and development projects designed to assist... 7 Agriculture 8 2010-01-01 2010-01-01 false Research and development. 924.45 Section 924.45 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing...

7 CFR 929.45 - Research and development.

Science.gov (United States)

2010-01-01

... establishment of production research, marketing research, and market development projects, including paid... 7 Agriculture 8 2010-01-01 2010-01-01 false Research and development. 929.45 Section 929.45 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing...

Success rates for product development strategies in new drug development.

Science.gov (United States)

Dahlin, E; Nelson, G M; Haynes, M; Sargeant, F

2016-04-01

While research has examined the likelihood that drugs progress across phases of clinical trials, no research to date has examined the types of product development strategies that are the most likely to be successful in clinical trials. This research seeks to identify the strategies that are most likely to reach the market-those generated using a novel product development strategy or strategies that combine a company's expertise with both drugs and indications, which we call combined experience strategies. We evaluate the success of product development strategies in the drug development process for a sample of 2562 clinical trials completed by 406 US pharmaceutical companies. To identify product development strategies, we coded each clinical trial according to whether it consisted of an indication or a drug that was new to the firm. Accordingly, a clinical trial that consists of both an indication and a drug that were both new to the firm represents a novel product development strategy; indication experience is a product development strategy that consists of an indication that a firm had tested previously in a clinical trial, but with a drug that was new to the firm; drug experience is a product development strategy that consists of a drug that the firm had prior experience testing in clinical trials, but with an indication that was new to the firm; combined experience consists of both a drug and an indication that the firm had experience testing in clinical trials. Success rates for product development strategies across clinical phases were calculated for the clinical trials in our sample. Combined experience strategies had the highest success rate. More than three and a half percent (0·036) of the trials that combined experience with drugs and indications eventually reached the market. The next most successful strategy is drug experience (0·025) with novel strategies trailing closely (0·024). Indication experience strategies are the least successful (0·008

Peat production. Review of research projects; Turvetuotanto. Tutkimusalueen katsaus

Energy Technology Data Exchange (ETDEWEB)

Leinonen, A. [VTT Energy, Jyvaeskylae (Finland)

1997-12-01

The development target in the research area of peat production is to improve the competitiveness of peat by reducing production costs by 20 % (by FIM 5 - 6/MWh) from the level of the year 1992 and to reduce environmental impacts. The most important research objects by which the target in peat production technology will be achieved are drawing and preparation technology, drying technology, mechanical technology, method technology, integration of wood harvesting and peat production, and the application of the results of the OPTIMITURVE Research Programme in practice. (orig.)

Federal Support for Research and Development

National Research Council Canada - National Science Library

Campbell, Sheila

2007-01-01

...-being. Private businesses are the largest sponsors of research and development (R&D) in the United States, producing the discoveries that in turn lead to new products and services and the growth of productivity...

Performance Measurement in Global Product Development

DEFF Research Database (Denmark)

Taylor, Thomas Paul; Ahmed-Kristensen, Saeema

2013-01-01

there is a requirement for the process to be monitored and measured relative to the business strategy of an organisation. It was found that performance measurement is a process that helps achieve sustainable business success, encouraging a learning culture within organisations. To this day, much of the research into how...... performance is measured has focussed on the process of product development. However, exploration of performance measurement related to global product development is relatively unexplored and a need for further research is evident. This paper contributes towards understanding how performance is measured...

7 CFR 959.48 - Research and development.

Science.gov (United States)

2010-01-01

... approval of the Secretary, may establish or provide for the establishment of production research, marketing research, and development projects designed to assist, improve, or promote the marketing, distribution... 7 Agriculture 8 2010-01-01 2010-01-01 false Research and development. 959.48 Section 959.48...

Radioisotope research and development at Los Alamos National Laboratory

International Nuclear Information System (INIS)

Peterson, E.J.

1993-01-01

Throughout its fifty year history, Los Alamos National Laboratory has conducted research and development in the production, isolation, purification, and application of radioactive isotopes. Initially this work supported the weapons development mission of the Laboratory. Over the years the work has evolved to support basic and applied research in many diverse fields, including nuclear medicine, biomedical studies, materials science, environmental research and the physical sciences. In the early 1970s people in the Medical Radioisotope Research Program began irradiating targets at the Los Alamos Meson Physics Facility (LAMPF) to investigate the production and recovery of medically important radioisotopes. Since then spallation production using the high intensity beam at LAMPF has become a significant source of many important radioisotopes. Los Alamos posesses other facilities with isotope production capabilities. Examples are the Omega West Reactor (OWR) and the Van de Graaf Ion Beam Facility (IBF). Historically these facilities have had limited availability for radioisotope production, but recent developments portend a significant radioisotope production mission in the future

Developments in the production of economics PhDs at four research-intensive universities in South Africa

Directory of Open Access Journals (Sweden)

Phillip de Jager

2017-03-01

Full Text Available There is a national drive to increase PhD production, yet we know little about how this imperative takes shape within different disciplines. We therefore set out to explore recent developments and the current status of the PhD in economics at four South African research-intensive universities. A data set of all economics PhDs produced in these commerce faculties during the period 2008-2014 was analysed to determine whether the departments of economics responded to the call for increased doctoral production, and the role the PhD by publication might have played in the process. How an increase in quantity might influence doctoral education in the respective academic departments was also considered by supplementing the quantitative data with perspectives from heads of department at the four institutions. The notable increase in doctoral production over the time period studied shows that national and international trends have influenced doctoral education in economics departments within South African research-intensive universities. Increased usage of the PhD by publication has implications for policy and pedagogical practice within these departments, especially as there seems to be limited available supervisory capacity. Other changes in departmental practices, such as the entrenchment of a research culture and the promotion of collaborative research amongst students and staff, also contributed to maintain quality in doctoral education.

Improving Marketing's Contribution to New Product Development

NARCIS (Netherlands)

Drechsler, Wenzel; Natter, Martin; Leeflang, Peter S. H.

In many firms, the marketing department plays a minor role in new product development (NPD). However, recent research demonstrates that marketing capabilities more strongly influence firm performance than other areas such as research and development. This finding underscores the importance of

The Reality of Virtual Reality Product Development

Science.gov (United States)

Dever, Clark

Virtual Reality and Augmented Reality are emerging areas of research and product development in enterprise companies. This talk will discuss industry standard tools and current areas of application in the commercial market. Attendees will gain insights into how to research, design, and (most importantly) ship, world class products. The presentation will recount the lessons learned to date developing a Virtual Reality tool to solve physics problems resulting from trying to perform aircraft maintenance on ships at sea.

7 CFR 905.54 - Marketing, research and development.

Science.gov (United States)

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Marketing, research and development. 905.54 Section... Marketing, research and development. The committee may, with the approval of the Secretary, establish, or provide for the establishment of, projects including production research, marketing research and...

Consumer orientation of product developers and their product perception compared to that of consumers

NARCIS (Netherlands)

Sijtsema, S.J.; Backus, G.B.C.; Linnemann, A.R.; Jongen, W.M.F.

2004-01-01

This research concludes that although product developers (58, response rate 35%) and consumers (344, response rate 57%) perceive health and its relation to product characteristics in the same way, the perception of product developers is more extreme. Furthermore, factor analysis reveals four

Research and development on process components for hydrogen production. (1) Test-fabrication of sulfuric acid transfer pump

International Nuclear Information System (INIS)

Iwatsuki, Jin; Terada, Atsuhiko; Hino, Ryutaro; Kubo, Shinji; Onuki, Kaoru; Watanabe, Yutaka

2009-01-01

Japan Atomic Energy Agency has been conducting a research and development on hydrogen production system using High Temperature Gas-Cooled Reactor. As a part of this effort, thermochemical water-splitting cycle featuring iodine- and sulfur-compounds (IS process) is under development considering its potential of large-scale economical hydrogen production. The IS process constitutes very severe environments to the materials of construction because of the corrosive nature of process chemicals, especially of the high temperature acidic solutions of sulfuric acid and hydriodic acid dissolving iodine. Therefore, selection of the corrosion-resistant materials and development of the components have been the crucial subjects of process development. This paper concerns the sulfuric acid transfer pump. The development has been implemented of a pump for transporting concentrated sulfuric acid at temperatures of higher than 300degC and at elevated pressure. Recent progress of these activities will be reported. (author)

Product development alliances: factors influencing formation and success

DEFF Research Database (Denmark)

Olsen, Johanne Rønnow; Harmsen, Hanne; Friis, Alan

2008-01-01

, results indicate that success factors are rather universal across industries and types of alliances. Research limitations/implications - Further research should explore the findings further, both within the food industry context, as well as more broadly in terms of geography and industry. Practical...... implications - Managers obtain a tool for planning and refining their innovation strategy and actions regarding product development alliances. Originality/value - This research contributes to the presently limited literature on product development alliances, specifically in the food industry context....

Advanced Product Development for Combat Casualty Care at the U.S. Army Institute of Surgical Research

Science.gov (United States)

2010-04-01

soldiers (22). These results were in contrast to concerns that ketamine, a psychoactive drug , would increase PTSD development. Later work showed that...problem. As the most important step to this process, research products, devices, drugs , techniques and practice guidelines are fielded to implement...Anesthesia (URODA) in decreasing narcotic consumption and opioid dependence in burned soldiers. Within our burn center, increased and improved

Conceptual Development af a 3D Product Configuration Model

DEFF Research Database (Denmark)

Skauge, Jørn

2006-01-01

in the development of IT-systems that support the procedures in companies and in the building industry. In other words, it is a knowledge-based system that helps companies in their daily work. The aim of the project has been to develop and examine conceptual ideas about 3D modelling configurator used in the company......’s production of steel fire sliding doors. The development of the 3D digital model is based on practical rather than theoretical research. The result of the research is a prototype digital 3D model to be presented live.......Paper. This project deals with 3D product configuration of a digital building element which has been developed as a prototype in cooperation between a product manufacturer and a research institution in Denmark. The project falls within the concept of product modelling which is more and more used...

The effective management of medical isotope production in research reactors

International Nuclear Information System (INIS)

Drummond, D.T.

1993-01-01

During the 50-yr history of the use of radioisotopes for medical applications, research reactors have played a pivotal role in the production of many if not most of the key products. The marriage between research reactors and production operations is subject to significant challenges on two fronts. The medical applications of the radioisotope products impose some unique constraints and requirements on the production process. In addition, the mandates and priorities of a research reactor are not always congruent with the demands of a production environment. This paper briefly reviews the historical development of medical isotope production, identifies the unique challenges facing this endeavor, and discusses the management of the relationship between the isotope producer and the research reactor operator. Finally, the key elements of a successful relationship are identified

Using market information in product development

DEFF Research Database (Denmark)

Søndergaard, Helle Alsted; Harmsen, Hanne

2007-01-01

development are also fulfilled since the development teams recognize the value of the information and actively use it in their product development decision making. However, the means-end approach cannot (in its present form) reveal experienced quality since the approach includes no trying of the product...... of abstraction in consumers' minds. At the same time they are reminded that this information should feed into the process of making decisions in product development....... on the understanding of consumers' vertical and horizontal decision structure) combined with considerations on effective internal use of the information. Design/methodology/approach - The suggested model is applied in case studies in an action research project, and experiences with the application are discussed...

Biomass production and basic research on photosynthesis

International Nuclear Information System (INIS)

Broda, E.

1979-01-01

This document is a report of the conference: research and development work in Austria, organized by Austrian ministry of science and research, the ASSA and the OMV-stock company in 1979, which took place in Vienna. The text is about the different possible forms of solar energy utilization. Broda analyses in detail the utilization and production of biomass. (nowak)

Research and Development Costs in Retail Trade

Directory of Open Access Journals (Sweden)

Radojko LUKIC

2016-12-01

Full Text Available Research and development expenses are crucial business performance factors for all enterprises, including trading companies. The size and structure of these expenses depend largely on the nature of a company’s activities. Due to such importance and specificity, the research focus of this article is on R&D expenses in trading companies with particular emphasis on retail companies. Their share in the sales revenue of trading companies is increasingly important and determined by many factors, such as innovation, size, location, product categories, and others. Due to varying intensity of influence of these and other factors, research and development expenses in commercial companies differ among countries, trade types (wholesale, retail, wholesale and retail, retail formats (store types and product categories. Understanding the factors of these differences is important for efficient management of research and development costs in trade, particularly retail companies. They are the focus of research in this work.

Irradiated fuel by-product separation research in Canada

International Nuclear Information System (INIS)

Burston, M.

1984-01-01

Although no decision has been made to reprocess irradiated CANDU fuel, by-product separation research has recently been initiated in Canada because of its potential importance to Canadian research programs in advanced fuel cycles (especially U/Pu cycle development in the near term) and nuclear waste management. In addition, separated by-products could have a significant commercial potential. Demonstrated applications include: heat sources, gamma radiation sources, light sources, new materials for productions of other useful isotopes, etc. For illustrative purposes the calculated market value of by-products currently stored in irradiated CANDU fuel is approximately $210/kgU. Ontario Hydro has initiated a program to study the application of new separation technolgies, such as laser-based techniques and the plasma ion cyclotron resonance separation technique, to either augment and/or supplant the chemical extraction methods. The main goal is to develop new, more economical extraction methods in order to increase the magnitude of the advantages resulting from this approach to reprocessing. (author)

Collaborative Engineering for Research and Development

Science.gov (United States)

Davis, Jose M.; Keys, L. Ken; Chen, Injazz J.

2004-01-01

Research and development (R&D) organizations are being required to be relevant, to be more application-oriented, and to be partners in the strategic management of the business while meeting the same challenges as the rest of the organization, namely: (1) reduced time to market; (2) reduced cost; (3) improved quality; (4) increased reliability; and (5) increased focus on customer needs. Recent advances in computer technology and the Internet have created a new paradigm of collaborative engineering or collaborative product development (CPD), from which new types of relationships among researchers and their partners have emerged. Research into the applicability and benefits of CPD in a low/no production, R&D, and/or government environment is limited. In addition, the supply chain management (SCM) aspects of these relationships have not been studied. This paper presents research conducted at the NASA Glenn Research Center (GRC) investigating the applicability of CPD and SCM in an R&D organization. The study concentrates on the management and implementation of space research activities at GRC. Results indicate that although the organization is engaged in collaborative relationships that incorporate aspects of SCM, a number of areas, such as development of trust and information sharing merit special attention.

Developing Technology Products - A Physicist's Perspective

Science.gov (United States)

Burka, Michael

2014-03-01

There are many physicists working in the industrial sector. We rarely have the word physicist in our job title; we are far more commonly called engineers or scientists. But, we are physicists, and we succeed because our training in physics has given us the habits of mind and the technical skills that one needs to solve complex technical challenges. This talk will explore the transition from physics research to technology product development using examples from my own career, first as a postdoctoral fellow and research scientist on the LIGO project, and then developing products in the spectroscopy, telecommunications, and medical device industries. Approaches to identifying and pursuing opportunities in industry will be discussed.

Exploring the Potential of a German Living Lab Research Infrastructure for the Development of Low Resource Products and Services

Directory of Open Access Journals (Sweden)

Justus von Geibler

2014-09-01

Full Text Available Living Labs for Sustainable Development aim to integrate users and actors for the successful generation of low-resource innovations in production-consumption systems. This paper investigates potentials of and measures towards the realization of a German Living Lab infrastructure to support actor-integrated sustainability research and innovations in Germany. Information was primarily derived from extensive dialog with experts from the fields of innovation, sustainable development and the Living Lab community (operators, users, etc., which was facilitated through interviews and workshops. A status quo analysis revealed that, generally, the sustainability and Living Lab communities are hardly intertwined. Twelve Living Labs that explicitly consider sustainability aspects were identified. The application fields “Living and Working”, “Town, Region and Mobility”, and “Retail and Gastronomy” were identified as particularly suitable for investigation in Living Labs and highly relevant in terms of resource efficiency. Based on the analyses of drivers and barriers and SWOT, keystones for the development of a research infrastructure for user integrated development of sustainable products and services were formulated. Suggested strategies and measures include targeted funding programs for actor-integrated, socio-technical research based on a Living Lab network, a communication campaign, and programs to foster networking and the inclusion of SMEs.

77 FR 6791 - Biomass Research and Development Technical Advisory Committee

Science.gov (United States)

2012-02-09

... DEPARTMENT OF ENERGY Biomass Research and Development Technical Advisory Committee AGENCY: Energy... announces an open meeting of the Biomass Research and Development Technical Advisory Committee. The Federal... leading to the production of biobased fuels and biobased products. Tentative Agenda Update on USDA Biomass...

Control and Diagnosis in Integrated Product Development - Observations during the Development of an AGV

Science.gov (United States)

Stetter, R.; Simundsson, A.

2015-11-01

This paper is concerned with the integration of control and diagnosis functionalities into the development of complete systems which include mechanical, electrical and electronic subsystems. For the development of such systems the strategies, methods and tools of integrated product development have attracted significant attention during the last decades. Today, it is generally observed that product development processes of complex systems can only be successful if the activities in the different domains are well connected and synchronised and if an ongoing communication is present - an ongoing communication spanning the technical domains and also including functions such as production planning, marketing/distribution, quality assurance, service and project planning. Obviously, numerous approaches to tackle this challenge are present in scientific literature and in industrial practice, as well. Today, the functionality and safety of most products is to a large degree dependent on control and diagnosis functionalities. Still, there is comparatively little research concentrating on the integration of the development of these functionalities into the overall product development processes. The main source of insight of the presented research is the product development process of an Automated Guided Vehicle (AGV) which is intended to be used on rough terrain. The paper starts with a background describing Integrated Product Development. The second section deals with the product development of the sample product. The third part summarizes some insights and formulates first hypotheses concerning control and diagnosis in Integrated Product Development.

Ethnobotany as a pharmacological research tool and recent developments in CNS-active natural products from ethnobotanical sources.

Science.gov (United States)

McClatchey, Will C; Mahady, Gail B; Bennett, Bradley C; Shiels, Laura; Savo, Valentina

2009-08-01

The science of ethnobotany is reviewed in light of its multi-disciplinary contributions to natural product research for the development of pharmaceuticals and pharmacological tools. Some of the issues reviewed involve ethical and cultural perspectives of healthcare and medicinal plants. While these are not usually part of the discussion of pharmacology, cultural concerns potentially provide both challenges and insight for field and laboratory researchers. Plant evolutionary issues are also considered as they relate to development of plant chemistry and accessing this through ethnobotanical methods. The discussion includes presentation of a range of CNS-active medicinal plants that have been recently examined in the field, laboratory and/or clinic. Each of these plants is used to illustrate one or more aspects about the valuable roles of ethnobotany in pharmacological research. We conclude with consideration of mutually beneficial future collaborations between field ethnobotanists and pharmacologists.

7 CFR 927.47 - Research and development.

Science.gov (United States)

2010-01-01

... provide for the establishment of production and post-harvest research, or marketing research and... 7 Agriculture 8 2010-01-01 2010-01-01 false Research and development. 927.47 Section 927.47 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing...

Developing a Support Tool for Global Product Development Decisions

DEFF Research Database (Denmark)

Søndergaard, Erik Stefan; Ahmed-Kristensen, Saeema

2016-01-01

This paper investigates how global product development decisions are made through a multiple-case study in three Danish engineering. The paper identifies which information and methods are applied for making decisions and how decision-making can be supported based on previous experience. The paper...... presents results from 51 decisions made in the three companies, and based on the results of the studies a framework for a decision-support tool is outlined and discussed. The paper rounds off with an identification of future research opportunities in the area of global product development and decision-making....

Product development in the socio-sphere game changing paradigms for 21st century breakthrough product development and innovation

CERN Document Server

2014-01-01

This book provides a broad overview of a number of game-changing paradigms that are anticipated to reshape 21st century product development. Topics including cloud computing-based design, cloud manufacturing, crowd-sourcing and mass collaboration, open source and social product development will be discussed in the context of advanced distributed and collaborative product creation. The purpose of the book is threefold: (1) to provide decision makers in industry with a solid base for strategic design and manufacturing-related process re-organization; (2) to provide researchers and scientist with the state-of-the-art from an academic perspective as well as a research agenda aimed at advancing the theoretical foundations of the field; and (3) to serve as supplementary reading in design and manufacturing-related courses at universities and technical colleges.

An Empirical Study of Capability Development within Product Innovation Projects

Directory of Open Access Journals (Sweden)

Alireza Javanmardi Kashan

2015-04-01

Full Text Available The objective of this paper is to develop insights into firms’ strategic capability development processes within product innovation projects. In particular, the research aims at investigating the interactions among product innovation, knowledge processes, and capability development within firms. Building on qualitative data from the auto-industry, our analysis reveals that across four product innovation projects, the case company developed architectural knowledge and capability. Findings reveal that, along with changes at each level of product architecture, “design knowledge” and “design capability” have been developed at the same level of product architecture, leading to capability development at that level. Furthermore, findings suggest that such capability transformation resulting from knowledge and capability creation over the course of case projects leads to modularization of product architecture. Overall, the research contributes to identifying and emphasizing the role of micro processes in capability development and renewal, which in turn enhances our understanding of strategic capability development processes.

Animal Production Research Advances

African Journals Online (AJOL)

Animal Production Research Advances is a peer-review journal established expressly to promote the production of all animal species utilized as food. The journal has an international scope and is intended for professionals in animal production and related sciences. We solicit contributions from animal production and ...

Publications | Page 76 | IDRC - International Development Research ...

International Development Research Centre (IDRC) Digital Library (Canada)

Results 751 - 760 of 6335 ... IDRC works with developing-country researchers and institutions to build local capacity through funding, knowledge sharing, and training. Through books, articles, research ... Caribbean health : diversity in local food production to combat obesity (restricted access). Led by researchers from McGill ...

Cooperation Between Suppliers and Retail Chains in Developing Systemic Products

Directory of Open Access Journals (Sweden)

Katarzyna Bilińska-Reformat

2016-01-01

Full Text Available Seeking a competitive advantage, retail chains develop systemic products. Introducing systemic products to retailers' offer requires establishment of close cooperation with their suppliers. In the paper the assumption has been made that offering systemic products makes the offer more attractive for customer. It is also reason for development of cooperation between retail chains and suppliers. Selected commercial enterprises were research objects in the study. Analyses included in the paper concern the years between 2009 and 2015. Research methods: critical analysis of the literature, results of own research method concerning cooperation between retail chains and suppliers, and the case research method.

Feeding strategies for improving productivity of ruminant livestock in developing countries

International Nuclear Information System (INIS)

1989-01-01

The primary function of the FAO/IAEA Programme on Animal Production and Health is to improve the capability of animal production and veterinary institutes in developing countries to conduct research into solving the problems of low animal productivity. The main objective of the Advisory Group Meeting was to review recent developments in ruminant nutrition research and identify developments and techniques that could be of use to developing Member States to increase livestock productivity. The report contains papers presented at the meeting. Refs, figs and tabs

Plant natural products research in tuberculosis drug discovery and ...

African Journals Online (AJOL)

Plant natural products research in tuberculosis drug discovery and development: A situation report ... African Journal of Biotechnology ... tuberculosis (XDR-TB), call for the development of new anti-tuberculosis drugs to combat this disease.

Health research, development and innovation in England from 1988 to 2013: from research production to knowledge mobilization.

Science.gov (United States)

Walshe, Kieran; Davies, Huw T O

2013-10-01

This paper presents a critical analysis of the development of government policy and practice on health research, development and innovation over the last 25 years - starting from the publication of a seminal report from the House of Lords Science and Technology Committee in 1988. We first set out to map and analyse the trends in ideas and thinking that have shaped research policy and practice over this period, and to put the development of health research, development and innovation in the wider context of health system reforms and changes. We argue that though this has been a transformative period for health research, rather less progress has been made in the domains of development and innovation, and we offer an analysis of why this might be the case. Drawing on advances in our understanding about how research informs practice, we then make the case for a more integrative model of research, development and innovation. This leads us to conclude that recent experiments with Collaborations for Leadership in Applied Health Research and Care and Academic Health Science Centres and Networks offer some important lessons for future policy directions.

Developing product families based on architectures

DEFF Research Database (Denmark)

Harlou, Ulf

2006-01-01

family master plan (PFMP). The PFMP aims at modelling product families and especially variety of product families. The results of this thesis build on research literature and experiences from the industrial partners. Extensive verifications of the theory contributions, models and tools have been carried......The subject of this PhD thesis is development of product families based on architectures. Companies are introducing more and more product variants to fulfil the market demands. These new variants add complexity to many of the processes and systems in the companies. Reuse of standard designs (i.......e. design entities) and re-use of the way new products are developed can simplify the processes and systems. Case studies show that reuse can lead to reduction of cost and time-to-market of new products. One of the means for managing reuse of standard designs within product families are architectures...

Profession based research through Action research. Framing knowledge production in an interdisciplinary perspective

DEFF Research Database (Denmark)

Tofteng, Ditte Maria Børglum; Bladt, Mette; Husted, Mia

to work on tendencies to privilege some types of knowledge above others when it comes to knowledge production and research processes. The participatory worldview mandates action researchers to consider participants as a collaborative resource and agents of cyclical transformation who bring to the table...... practical knowledge and experience about situations while the recurring pattern of reflection, analysis and action contributes to the constant evolution and redefinition of the original goal. Methodology, Methods, Research Instruments or Sources Used This paper is a theoretical reflection on actions...... will be an reflection on action research and participatory research processes as an asvwer to developing a vocational research practice that goes beyond quantitative an qualitative methodologies and into to research as an research and development process. References Bladt, M. (2012): Frirum og værksteder I Duus m...

Nepal | IDRC - International Development Research Centre

International Development Research Centre (IDRC) Digital Library (Canada)

Plant breeding research in the 1980s and 1990s led to more productive cereals, such as finger millet and barley. Other efforts have strengthened farmers' ability to conserve the genetic diversity of their traditional crops. An improved rice variety — developed collaboratively by farmers and researchers — was introduced in ...

Government-industry-uUniversity and rResearch lLaboratories cCoordination for new product development: Session 2. Government research laboratory perspective

International Nuclear Information System (INIS)

Kuzay, T.M.

1997-01-01

This talk is the second in an expanded series of presentations on the Government-Industry-University and Research Laboratories Coordination for new product development, which is a timely and important public policy issue. Such interactions have become particularly timely in light of the present decline in funding for research and development (R ampersand D) in the nation''s budget and in the private sector. These interactions, at least in principle, provide a means to maximize benefits for the greater good of the nation by pooling the diminishing resources. National laboratories, which traditionally interacted closely with the universities in educational training, now are able to also participate closely with industry in joint R ampersand D thanks to a number of public laws legislated since the early 80s. A review of the experiences with such interactions at Argonne National Laboratory, which exemplifies the national laboratories, shows that, despite differences in their traditions and the missions, the national laboratory-industry-university triangle can work together

Research governance and scientific knowledge production in The Gambia

OpenAIRE

Frederick U. Ozor

2014-01-01

Public research institutions and scientists are principal actors in the production and transfer of scientific knowledge, technologies and innovations for application in industry as well for social and economic development. Based on the relevance of science and technology actors, the aim of this study was to identify and explain factors in research governance that influence scientific knowledge production and to contribute to empirical discussions on the impact levels of different governance m...

Space Product Development: Bringing the Benefits of Space Down to Earth

Science.gov (United States)

Allen, Rosalie W.; Tygielski, Andrew; Gabris, Edward A.

1997-01-01

The newly developed microgravity Research Program Office was created to consolidate and integrate NASA's microgravity research efforts, comprised of the microgravity Science and Applications Program and Space Product Development Program. This resulted in an integrated agency program serving the science and industrial research communities, providing leadership, management, direction and overview of all agency microgravity research activities. This paper provides an overview of NASA's microgravity Research Program, with particular emphasis on the Space Product Development Program activities, the potential economic impact and quality of life improvements resulting from this research, and future plans for commercial microgravity research in space. The goal of the Space Product Development Program is to facilitate the use of space for commercial products and services. The unique attributes of space are exploited to conduct industry driven research in the areas of crystallography, bio-systems, agriculture, electronic and non-electronic materials. Industry uses the knowledge gained from focused space research to create new products and processes, to gain economic competitive advantages, to create new jobs and improve the quality of life on earth. The objectives of the program are implemented through NASA's Commercial Space Centers, non-profit consortia of industry, academia and government, that provide the mechanism for communication and technical expert exchange between NASA and industry. Over 200 commercial research activities have been conducted by the Commercial Space Centers and their industrial affiliates over the last four and one-half years during Space Shuttle mission, as well as sounding rocket flights. The results of this research will have a significant impact on competitive products, jobs and quality of life improvements.

When Research Meets Development: Antecedents and Implications of Transfer Speed

NARCIS (Netherlands)

Du, J.; Leten, B.; Vanhaverbeke, W.; Lopez-Vega, H.

2014-01-01

This paper focuses on the organization of new product development in large, R&D-intensive firms. In these firms, research and development activities are often separated. Research is conducted in dedicated research projects at specialized research labs. Once research results are achieved by research

University of Maine Integrated Forest Product Refinery (IFPR) Technology Research

Energy Technology Data Exchange (ETDEWEB)

Pendse, Hemant P.

2010-11-23

This project supported research on science and technology that forms a basis for integrated forest product refinery for co-production of chemicals, fuels and materials using existing forest products industry infrastructure. Clear systems view of an Integrated Forest Product Refinery (IFPR) allowed development of a compelling business case for a small scale technology demonstration in Old Town ME for co-production of biofuels using cellulosic sugars along with pulp for the new owners of the facility resulting in an active project on Integrated Bio-Refinery (IBR) at the Old Town Fuel & Fiber. Work on production of advanced materials from woody biomass has led to active projects in bioplastics and carbon nanofibers. A lease for 40,000 sq. ft. high-bay space has been obtained to establish a Technology Research Center for IFPR technology validation on industrially relevant scale. UMaine forest bioproducts research initiative that began in April 2006 has led to establishment of a formal research institute beginning in March 2010.

Development of feed supplementation strategies for improving the productivity of dairy cattle on smallholder farms in Africa. Proceedings of the final research co-ordination meeting of a co-ordinated research project

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

The Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture through co-ordinated research projects (CRP) supports studies aimed at improving livestock productivity in developing countries through the application of nuclear and related techniques. These studies have focused on animal nutrition, animal reproduction and more recently on animal nutrition/reproduction interactions with emphasis on smallholder farming systems. The primary aim of this CRP was to identify approaches for improving the productivity of dairy cattle maintained on smallholder farms in peri-urban areas. Central to the approach was to first obtain baseline information on productivity and reproductive efficiency and thereby identify nutritional and management constraints. Subsequently, corrective measures were developed and tested, keeping in mind the need for maximising the efficiency of current production systems and sustaining the nutrient supply through practical and economically feasible feed supplementation strategies developed using locally available feed resources. In addition the project envisaged contributing to enhancing the level of expertise within the national animal production research institutes in the region, to encourage close contact and interaction between scientists and institutions in Africa and to promote scientific information exchange on a regional basis. Through the project substantial progress was made in understanding the relationship between nutrient supply and productive and reproductive functions in dairy cattle on smallholder farming systems. Most of the participating countries were able to develop and test cost-effective feed supplementation strategies which improved both milk production and/or reproductive efficiency. The present publication contains the reports from participants of the project presented at the final Research Co-ordination Meeting held in Vienna from 7 to 11 September 1998 Refs, figs, tabs

Development of feed supplementation strategies for improving the productivity of dairy cattle on smallholder farms in Africa. Proceedings of the final research co-ordination meeting of a co-ordinated research project

International Nuclear Information System (INIS)

1999-07-01

The Joint FAO/IAEA Division of Nuclear Techniques in Food and Agriculture through co-ordinated research projects (CRP) supports studies aimed at improving livestock productivity in developing countries through the application of nuclear and related techniques. These studies have focused on animal nutrition, animal reproduction and more recently on animal nutrition/reproduction interactions with emphasis on smallholder farming systems. The primary aim of this CRP was to identify approaches for improving the productivity of dairy cattle maintained on smallholder farms in peri-urban areas. Central to the approach was to first obtain baseline information on productivity and reproductive efficiency and thereby identify nutritional and management constraints. Subsequently, corrective measures were developed and tested, keeping in mind the need for maximising the efficiency of current production systems and sustaining the nutrient supply through practical and economically feasible feed supplementation strategies developed using locally available feed resources. In addition the project envisaged contributing to enhancing the level of expertise within the national animal production research institutes in the region, to encourage close contact and interaction between scientists and institutions in Africa and to promote scientific information exchange on a regional basis. Through the project substantial progress was made in understanding the relationship between nutrient supply and productive and reproductive functions in dairy cattle on smallholder farming systems. Most of the participating countries were able to develop and test cost-effective feed supplementation strategies which improved both milk production and/or reproductive efficiency. The present publication contains the reports from participants of the project presented at the final Research Co-ordination Meeting held in Vienna from 7 to 11 September 1998

7 CFR 981.41 - Research and development.

Science.gov (United States)

2010-01-01

... research, marketing research and development projects, and marketing promotion including paid advertising... with such portion of his direct expenditure for such marketing promotion including paid advertising as... promotion including paid advertising, that promotes the sale of almonds, almond products or their uses. No...

Rationale for energy research and development programme

Energy Technology Data Exchange (ETDEWEB)

1976-04-01

This paper describes the rationale for the expenditure of government money on energy research and development. The Committee, organized in 1974, established the following order of project priorities: projects to determine current and future energy demand; projects concerned with the conservation and more efficient use of energy; projects concerned with the assessment of indigenous energy resources; projects concerned with the assessment of the human, financial, and organizational resources for energy production and use; and projects concerned with economic, technological, social, and environmental aspects of energy use and production over the next 15 years and beyond the next 15 years. Significant factors affecting the national energy economy, the strategy for energy research and development, and the results of committee activities are summarized. An energy scenario research is laid out. (MCW)

Thorium research and development in Turkey

International Nuclear Information System (INIS)

Güngör, Görkem

2015-01-01

Turkey has a great potential regarding thorium resources. Thorium exploration activities have been done in the past mainly by state organizations for determining the thorium resources in Turkey. Thorium occurs as complex mineral together with barite, fluorite and rare earth elements (REE). The increase in global demand for REE creates the opportunity for REE production which will also produce thorium as a by-product. The development of nuclear energy program in Turkey provides the stimulus for research and development activities in nuclear technologies. The final declaration of the workshop emphasizes the importance of thorium reserves in Turkey and the necessity for thorium exploration and development activities in order to determine the feasibility of thorium mining and fuel cycle in Turkey. These activities should be conducted together with the development of technologies for separation of these complex minerals and purification of thorium, REE and other minerals to be utilized as commercial products. There are advanced academic research studies on thorium fuel cycle which should be supported by the industry in order to commercialize the results of these studies. Turkey should be integrated to international R and D activities on ADS which is expected to commercialize on medium term. The legislative framework should be developed in order to provide the industrial baseline for nuclear technologies independent from nuclear regulatory activities

Internationalization of Research and Development

DEFF Research Database (Denmark)

Håkanson, Lars

2014-01-01

with geographically dispersed and organizationally decentralized R&D. A simple typology of foreign R&D units is presented, emphasizing that the opportunities and challenges vary with the nature of their tasks, which range from technical support and local adaptation of products and processes to product development and......, in some cases, applied and basic research. Managerial systems, procedures, and practices for coordination and control of internationally decentralized R&D are identified, along with mechanisms promoting knowledge management, problem solving, and innovation....

Agricultural biotechnology research and development in Ethiopia ...

African Journals Online (AJOL)

Ethiopia is an agrarian country that can have enormous benefit from the applications of biotechnology for increasing its agricultural productivity. The country is at initial stages of research and development in agricultural biotechnology with scattered efforts underway in various public institutions. Research efforts and ...

Sustainable Product Development Through a Life-Cycle Approach to Product and Service Creation (Keynote speech)

DEFF Research Database (Denmark)

McAloone, Timothy Charles

. These two schools of environmental re-search practice are mirrored in the way in which industry approaches environmental problems. Since the definition in 1987 of Sustainable Development [2] efforts have been made to relate the goals and ideals of sustainabil-ity to the domain of product development, thus...... adding new dimensions, such as social and moral values, to the original agenda of environmental improvement. The redefinition of the role of the product developer, from environmentally conscious product de-veloper to sustainably aware product developer has led to new insights into the way in which...... products are developed and used ¿ and to where environmental effects occur in the lifetime of a product. The role of the product developer is thus more complex in relation to sustainability, as the focus for improvement of a product may not (and very often does not) lie in the physical artefactual...

Ecotribology research developments

CERN Document Server

2016-01-01

This book presents resent research advances in the area of eco-triobology. In the last years, eco-tribology or environmentally friendly tribology has gained increasing importance in sustainable engineering. Environmentally acceptable tribological practices save resources by optimizing product usage and reducing energy. This book covers current developments in all areas covered by the term eco-tribology, including biomimetics surfaces, control of friction and wear, environmental aspects of lubrication and surface modification techniques as well as tribological aspects of green applications, such wind-power turbines or solar panels.

Innovation in Product Development

DEFF Research Database (Denmark)

McAloone, Tim C.; Restrepo-Giraldo, John Dairo

2005-01-01

The course on Innovation in Product Development attempts to identify and understand the nature of innovation and product development and their important factors. The course takes both a theoretical and a practical approach and employs a mix of lectures, project work and group discussion. Format...... insight. Course content The following aspects of innovation in product development are considered: - Humans and products - Needs and products - Product life - Teams creating products - Products creating business - Product development models - Organising product development - Product development tools...... - The future of product development....

Techno-economic simulation data based deterministic and stochastic for product engineering research and development BATAN

International Nuclear Information System (INIS)

Petrus Zacharias; Abdul Jami

2010-01-01

Researches conducted by Batan's researchers have resulted in a number competences that can be used to produce goods and services, which will be applied to industrial sector. However, there are difficulties how to convey and utilize the R and D products into industrial sector. Evaluation results show that each research result should be completed with techno-economy analysis to obtain the feasibility of a product for industry. Further analysis on multy-product concept, in which one business can produce many main products, will be done. For this purpose, a software package simulating techno-economy I economic feasibility which uses deterministic and stochastic data (Monte Carlo method) was been carried out for multi-product including side product. The programming language used in Visual Basic Studio Net 2003 and SQL as data base processing software. This software applied sensitivity test to identify which investment criteria is sensitive for the prospective businesses. Performance test (trial test) has been conducted and the results are in line with the design requirement, such as investment feasibility and sensitivity displayed deterministically and stochastically. These result can be interpreted very well to support business decision. Validation has been performed using Microsoft Excel (for single product). The result of the trial test and validation show that this package is suitable for demands and is ready for use. (author)

Development of interactive hypermedia software for high school biology: A research and development study

Science.gov (United States)

Alturki, Uthman T.

The goal of this research was to research, design, and develop a hypertext program for students who study biology. The Ecology Hypertext Program was developed using Research and Development (R&D) methodology. The purpose of this study was to place the final "product", a CD-ROM for learning biology concepts, in the hands of teachers and students to help them in learning and teaching process. The product was created through a cycle of literature review, needs assessment, development, and a cycle of field tests and revisions. I applied the ten steps of R&D process suggested by Borg and Gall (1989) which, consisted of: (1) Literature review, (2) Needs assessment, (3) Planning, (4) Develop preliminary product, (5) Preliminary field-testing, (6) Preliminary revision, (7) Main field-testing, (8) Main revision, (9) Final field-testing, and (10) Final product revision. The literature review and needs assessment provided a support and foundation for designing the preliminary product---the Ecology Hypertext Program. Participants in the needs assessment joined a focus group discussion. They were a group of graduate students in education who suggested the importance for designing this product. For the preliminary field test, the participants were a group of high school students studying biology. They were the potential user of the product. They reviewed the preliminary product and then filled out a questionnaire. Their feedback and suggestions were used to develop and improve the product in a step called preliminary revision. The second round of field tasting was the main field test in which the participants joined a focus group discussion. They were the same group who participated in needs assessment task. They reviewed the revised product and then provided ideas and suggestions to improve the product. Their feedback were categorized and implemented to develop the product as in the main revision task. Finally, a group of science teachers participated in this study by reviewing

Development of anti-inflammatory drugs - the research and development process.

Science.gov (United States)

Knowles, Richard Graham

2014-01-01

The research and development process for novel drugs to treat inflammatory diseases is described, and several current issues and debates relevant to this are raised: the decline in productivity, attrition, challenges and trends in developing anti-inflammatory drugs, the poor clinical predictivity of experimental models of inflammatory diseases, heterogeneity within inflammatory diseases, 'improving on the Beatles' in treating inflammation, and the relationships between big pharma and biotechs. The pharmaceutical research and development community is responding to these challenges in multiple ways which it is hoped will lead to the discovery and development of a new generation of anti-inflammatory medicines. © 2013 Nordic Pharmacological Society. Published by John Wiley & Sons Ltd.

Profile and scientific production of the Brazilian Council for Scientific and Technological Development (CNPq) researchers in the field of Hematology/Oncology.

Science.gov (United States)

Oliveira, Maria Christina Lopes Araujo; Martelli, Daniella Reis; Quirino, Isabel Gomes; Colosimo, Enrico Antônio; Silva, Ana Cristina Simões e; Martelli Júnior, Hercílio; Oliveira, Eduardo Araujo de

2014-01-01

several studies have examined the academic production of the researchers at the CNPq, in several areas of knowledge. The aim of this study was to evaluate the scientific production of researchers in Hematology/Oncology who hold scientific productivity grants from the Brazilian Council for Scientific and Technological Development. the Academic CVs of 28 researchers in Hematology/Oncology with active grants in the three-year period from 2006 to 2008 were included in the analysis. The variables of interest were: institution, researchers' time after doctorate, tutoring of undergraduate students, masters and PhD degree, scientific production and its impact. from a total of 411 researchers in Medicine, 28 (7%) were identified as being in the area of Hematology/Oncology. There was a slight predominance of males (53.6%) and grant holders in category 1. Three Brazilian states are responsible for approximately 90% of the researchers: São Paulo (21,75%), Rio de Janeiro (3,11%), and Minas Gerais (2, 7%). During their academic careers, the researchers published 2,655 articles, with a median of 87 articles per researcher (IQR = 52 to 122). 65 and 78% of this total were indexed on the Web of Science and Scopus databases, respectively. The researchers received 14,247 citations on the WoS database with a median of 385 citations per researcher. The average number of citations per article was 8.2. in this investigation, it was noted that researchers in the field of Hematology/Oncology have a relevant scientific output from the point of view of quantity and quality compared to other medical specialties.

Productive interactions for societal impact: Developing a research information system for agriculture (RIS-Agric) at Stellenbosch University, South Africa

Energy Technology Data Exchange (ETDEWEB)

Boshoff, N.; Esterhuyse, H.

2016-07-01

Assessments of the societal impact of research rely on primary data as input to the relevant indicators. In the current project, the data collection for indicator construction is guided by the SIAMPI approach to societal impact assessment. According to SIAMPI, the achievement of societal impact involves two elements: stakeholders and productive interactions. The latter includes three kinds of interactions: direct personal interactions; indirect interactions where contact is mediated by a material or human ‘carrier’; and financial interactions that refer to the economic exchanges between researchers and stakeholders. The question to be explored is whether the assessment of the societal impact of research can be facilitated by capturing any direct, indirect and financial interactions between researchers and societal stakeholders in a research information system. CREST/SciSTIP is developing such a system, called RIS-Agric, in cooperation with the Faculty of AgriSciences at Stellenbosch University and four agricultural research funders in South Africa that represent different agricultural commodities. A RIS with productive interactions at its core – and the funded research project as the unit of observation – will produce the necessary data for indicators linked to the societal impact of research, in addition to generating insights about the ‘pathway’ from research to societal impact. The indicators need to be ‘socially robust’ in the sense that their validation processes should include the research beneficiaries and their representatives. In doing so, RIS-Agric will produce a useful, standardised measurement mechanism that is aligned across the different commodities. The focus on productive interactions will be supplemented by other methods in order to enable the quantification of societal impact in the form of ‘impact scores’. (Author)

Developing Collaborative Product Development Capabilities

DEFF Research Database (Denmark)

Mahnke, Volker; Tran, Yen

2012-01-01

innovation strategies’. Our analyses suggest that developing such collaboration capabilities benefits from the search for complementary practices, the combination of learning styles, and the development of weak and strong ties. Results also underscore the crucial importance of co-evolution of multi......Collaborative product development capabilities support a company’s product innovation activities. In the context of the fast fashion sector, this paper examines the development of the product development capabilities (PDC) that align product development capabilities in a dual innovation context......, one, slow paced, where the firm is well established and the other, fast paced, which represents a new competitive arena in which the company competes. To understand the process associated with collaborative capability development, we studied three Scandinavian fashion companies pursuing ‘dual...

New Product Development (NPD) Process - An Example of Industrial Sector

Science.gov (United States)

Kazimierska, Marianna; Grębosz-Krawczyk, Magdalena

2017-12-01

This aim of this article is to present the process of new product introduction on example of industrial sector in context of new product development (NPD) concept. In the article, the concept of new product development is discussed and the different stages of the process of new electric motor development are analysed taking into account its objectives, implemented procedures, functions and responsibilities division. In the article, information from secondary sources and the results of empirical research - conducted in an international manufacturing company - are used. The research results show the significance of project leader and regular cooperation with final client in the NPD process.

Basic Requirements for Systems Software Research and Development

Science.gov (United States)

Kuszmaul, Chris; Nitzberg, Bill

1996-01-01

Our success over the past ten years evaluating and developing advanced computing technologies has been due to a simple research and development (R/D) model. Our model has three phases: (a) evaluating the state-of-the-art, (b) identifying problems and creating innovations, and (c) developing solutions, improving the state- of-the-art. This cycle has four basic requirements: a large production testbed with real users, a diverse collection of state-of-the-art hardware, facilities for evalua- tion of emerging technologies and development of innovations, and control over system management on these testbeds. Future research will be irrelevant and future products will not work if any of these requirements is eliminated. In order to retain our effectiveness, the numerical aerospace simulator (NAS) must replace out-of-date production testbeds in as timely a fashion as possible, and cannot afford to ignore innovative designs such as new distributed shared memory machines, clustered commodity-based computers, and multi-threaded architectures.

Co-ordinated Interdisciplinary Efforts on Research in Animal Production and Health

Directory of Open Access Journals (Sweden)

Houe Hans

2003-03-01

Full Text Available The objectives are to review results and experiences from interdisciplinary research projects in Research Centre for the Management of Animal Production and Health (CEPROS concerning scientific content, organisation, and collaboration. The Centre has been founded as a result of an agreement between four institutions: the Danish Institute of Agricultural Sciences (DIAS, the Danish Veterinary Laboratory (DVL, the Danish Veterinary Institute for Virus Research (DVIV and The Royal Veterinary and Agricultural University (KVL. CEPROS is a "research centre without walls" and is physically located as an integrated part of the four institutions named above. The Centre has close collaboration with the industry. The superior goals of the Centre are to co-ordinate fundamental and applied research and simultaneously integrate the veterinary and the production oriented livestock research within animal health and welfare, taking into consideration the production economics and reduced use of medication. The assignment of the Centre is to initiate and carry out research, aiming to investigate the influence of breeding and production systems on animal health and welfare as well as on production and product quality. The Centre has since 1997 established 16 interdisciplinary research projects dealing with cattle, pigs, poultry, or mink. The scientific content can be divided into three research clusters: A. Management of animal production and health in production systems, B: Pathogenesis of production diseases, and C. Animal health economics. In Cluster A, the physical environments of production systems have been investigated, broader definitions of the concept health have been established and used in identification of risk factors. Cluster B has investigated physiological, immunological and genetic mechanisms behind development of production diseases and how to apply this knowledge in disease prevention. The cluster in animal health economics has developed decision

Current status of production and research of radioisotopes and radiopharmaceuticals in Indonesia

International Nuclear Information System (INIS)

Soenarjo, Sunarhadijoso; Tamat, Swasono R.

2000-01-01

The use of radioactive preparation in Indonesia has sharply increased during the past years, indicated by increase of the number of companies utilizing radioisotopes during 1985 to 1999. It has been clearly stressed in the BATAN's Strategic Plan for 1994-2014 that the production of radioisotopes and radiopharmaceuticals is one of five main industrial fields within the platform of the Indonesian nuclear industry. Research programs supporting the production of radioisotopes and radiopharmaceuticals as well as development of production technology are undertaken by the Research Center for Nuclear Techniques (RCNT) in Bandung and by the Radioisotope Production Center (RPC) in Serpong, involving cooperation with other research center within BATAN, universities and hospitals as well as overseas nuclear research institution. The presented paper describes production and research status of radioisotopes and radiopharmaceuticals in Indonesia after the establishment of P.T. Batan Teknologi in 1996, a government company assigned for activities related to the commercial application of nuclear technology. The reviewed status is divided into two short periods, i.e. before and after the Chairman Decree No. 73/KA/IV/1999 declaring new BATAN organizational structure. Subsequent to the Decree, all commercial requests for radioisotopes and radiopharmaceuticals are fulfilled by P.T. Batan Teknologi, while demands on novel radioactive preparations or new processing technology, as well as research and development activities should be fulfilled by the Center for the Development of Radioisotopes and Radiopharmaceuticals (CDRR) through non-commercial arrangement. The near-future strategic research programs to response to dynamic public demand are also discussed. The status of research cooperation with JAERI (Japan) is also reported. (author)

Business Cooperation and Regional Productive Development in ...

International Development Research Centre (IDRC) Digital Library (Canada)

Business Cooperation and Regional Productive Development in Chile, El ... program dedicated to strengthening independent policy research institutions, ... Call for proposals: Innovations for the economic inclusion of marginalized youth.

Science dynamics and research production indicators, indexes, statistical laws and mathematical models

CERN Document Server

Vitanov, Nikolay K

2016-01-01

This book deals with methods to evaluate scientific productivity. In the book statistical methods, deterministic and stochastic models and numerous indexes are discussed that will help the reader to understand the nonlinear science dynamics and to be able to develop or construct systems for appropriate evaluation of research productivity and management of research groups and organizations. The dynamics of science structures and systems is complex, and the evaluation of research productivity requires a combination of qualitative and quantitative methods and measures. The book has three parts. The first part is devoted to mathematical models describing the importance of science for economic growth and systems for the evaluation of research organizations of different size. The second part contains descriptions and discussions of numerous indexes for the evaluation of the productivity of researchers and groups of researchers of different size (up to the comparison of research productivities of research communiti...

Animal Production Research Advances: Submissions

African Journals Online (AJOL)

Where this is not possible, authors should submit two copies of original article not yet published anywhere and accompanied with a 3.5” diskette containing the article labeled appropriately in MS Word version to: Editor–in–Chief, Animal Production Research Advances Tropical Animal Health and Production Research Lab

The Design and Development of Enhanced Thermal Desorption Products

Directory of Open Access Journals (Sweden)

R. Humble

2005-01-01

Full Text Available This research study is based on a knowledge-transfer collaboration between The National Centre for Product Design and Development Research (PDR and Markes International Ltd. The aim of the two-year collaboration has been to implement design tools and techniques for the development of enhanced thermal desorption products. Thermal desorption is a highly-specialised technique for the analysis of trace-level volatile organic compounds. This technique allows minute quantities of these compounds to be measured; however, there is an increasing demand from customers for greater sensitivity over a wider range of applications, which means new design methodologies need to be evaluated. The thermal desorption process combines a number of disparate chemical, thermal and mechanical disciplines, and the major design constraints arise from the need to cycle the sample through extremes in temperature. Following the implementation of a comprehensive product design specification, detailed design solutions have been developed using the latest 3D CAD techniques. The impact of the advanced design techniques is assessed in terms of improved product performance and reduced development times, and the wider implications of new product development within small companies are highlighted.  

Mobility, productivity, gender and career development of Argentinean life scientists

OpenAIRE

Koen Jonkers

2011-01-01

In this study we use survival or event history analysis to explore the effect of international mobility, gender and productivity on career development of researchers in CONICET life science research institutes in Buenos Aires. We find support for our hypothesis that various productivity measures can explain the likelihood of promotion. Given the same level of productivity, female researchers tend to take longer to being promoted. Unconditionally international work experience has a positive ef...

Development of anti-counterfeit consumer product authentication system

Directory of Open Access Journals (Sweden)

Olena V. Narimanova

2015-06-01

Full Text Available Aim of the research is to develop an anti-counterfeit consumer product authentication system. The main requirements for this system are formulated, the choice of method of consumer product authentication is substantiated. The scheme of anti-counterfeit consumer product authentication system is developed basing on previously proposed method of checking the QR-code integrity and authenticity. The proposed within the system consumer product authentication technology is simple, economical for implementation, does not require the external changes of product packaging, does not affect existing production process. The technology can be recommended for the use to private businesses and government institutions that are interested in the security of their products from counterfeiting, as well as tracking and removing from circulation the counterfeit consumer products.

Genetic Algorithms for Development of New Financial Products

Directory of Open Access Journals (Sweden)

Eder Oliveira Abensur

2007-06-01

Full Text Available New Product Development (NPD is recognized as a fundamental activity that has a relevant impact on the performance of companies. Despite the relevance of the financial market there is a lack of work on new financial product development. The aim of this research is to propose the use of Genetic Algorithms (GA as an alternative procedure for evaluating the most favorable combination of variables for the product launch. The paper focuses on: (i determining the essential variables of the financial product studied (investment fund; (ii determining how to evaluate the success of a new investment fund launch and (iii how GA can be applied to the financial product development problem. The proposed framework was tested using 4 years of real data from the Brazilian financial market and the results suggest that this is an innovative development methodology and useful for designing complex financial products with many attributes.

Global product development

DEFF Research Database (Denmark)

Hansen, Zaza Nadja Lee; Ahmed-Kristensen, Saeema

2011-01-01

Globalisation has enabled companies to globalise their product development process. Today, everything from manufacturing to R&D can be globally distributed. This has led to a more complex and disintegrated product development process. This paper investigates the impacts companies have experienced...... operational solutions to counteract the negative impacts with varying degrees of success. This paper presents a unique look into global product development through an investigation of its impact on the organisation, the product development process, and the product. Furthermore, it shows the solutions...... as a result of this, and how they have been addressed. Data was collected through case studies of five Danish multinational corporations. The findings showed that the companies experienced several challenges when they globalised their product development process. They consequently implemented various...

Recent developments in drying of food products

Science.gov (United States)

Valarmathi, T. N.; Sekar, S.; Purushothaman, M.; Sekar, S. D.; Rama Sharath Reddy, Maddela; Reddy, Kancham Reddy Naveen Kumar

2017-05-01

Drying is a dehydration process to preserve agricultural products for long period usage. The most common and cheapest method is open sun drying in which the products are simply laid on ground, road, mats, roof, etc. But the open sun drying has some disadvantages like dependent on good weather, contamination by dust, birds and animals consume a considerable quantity, slow drying rate and damages due to strong winds and rain. To overcome these difficulties solar dryers are developed with closed environment for drying agricultural products effectively. To obtain good quality food with reduced energy consumption, selection of appropriate drying process and proper input parameters is essential. In recent years several researchers across the world have developed new drying systems for improving the product quality, increasing the drying rate, decreasing the energy consumption, etc. Some of the new systems are fluidized bed, vibrated fluidized bed, desiccant, microwave, vacuum, freeze, infrared, intermittent, electro hydrodynamic and hybrid dryers. In this review the most recent progress in the field of drying of agricultural food products such as new methods, new products and modeling and optimization techniques has been presented. Challenges and future directions are also highlighted. The review will be useful for new researchers entering into this ever needed and ever growing field of engineering.

Successful development of satiety enhancing food products: towards a multidisciplinary agenda of research challenges.

Science.gov (United States)

Van Kleef, E; Van Trijp, J C M; Van Den Borne, J J G C; Zondervan, C

2012-01-01

In the context of increasing prevalence of overweight and obesity in societies worldwide, enhancing the satiating capacity of foods may help people control their energy intake and weight. This requires an integrated approach between various food-related disciplines. By structuring this approach around the new product development process, this paper aims to present the contours of such an integrative approach by going through the current state of the art around satiety enhancing foods. It portrays actual food choice as the end result of a complex interaction between internal satiety signals, other food benefits, and environmental cues. Three interrelated routes to satiating enhancement are to change the food composition to develop stronger physiological satiation and satiety signals, anticipate and build on smart external stimuli at the moment of purchase and consumption, and improve palatability and acceptance of satiety enhanced foods. Key research challenges in achieving these routes in the field of nutrition, food technology, consumer, marketing, and communication are outlined.

Successful Development of Satiety Enhancing Food Products: Towards a Multidisciplinary Agenda of Research Challenges

Science.gov (United States)

Van Kleef, E.; Van Trijp, J.C.M.; Van Den Borne, J.J.G.C.; Zondervan, C.

2012-01-01

In the context of increasing prevalence of overweight and obesity in societies worldwide, enhancing the satiating capacity of foods may help people control their energy intake and weight. This requires an integrated approach between various food-related disciplines. By structuring this approach around the new product development process, this paper aims to present the contours of such an integrative approach by going through the current state of the art around satiety enhancing foods. It portrays actual food choice as the end result of a complex interaction between internal satiety signals, other food benefits, and environmental cues. Three interrelated routes to satiating enhancement are to change the food composition to develop stronger physiological satiation and satiety signals, anticipate and build on smart external stimuli at the moment of purchase and consumption, and improve palatability and acceptance of satiety enhanced foods. Key research challenges in achieving these routes in the field of nutrition, food technology, consumer, marketing, and communication are outlined. PMID:22530713

Collaboration networks and research productivity at IPEN

Energy Technology Data Exchange (ETDEWEB)

Monteiro, Carlos Anisio; Barroso, Antonio Carlos de Oliveira, E-mail: monteiro@ipen.br, E-mail: barroso@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2015-07-01

In this article, we investigate the IPEN's scientific collaboration network. Based on publications registered in IPEN's technical and scientific database was extracted a set of authors that developed technical and scientific work on the 2001 to 2010 period, using coauthorship to define the relationship between authors. From the data collected, we used degree centrality indicator in conjunction with two approaches to assess the relationship between collaboration and productivity: normal count, where for each publication that the author appears is added one for the author’s productivity indicator, and fractional count which is added a fractional value according to the total number of publication's authors. We concluded that collaboration for the development of a technical and scientific work has a positive correlation with the researchers productivity, that is, the greater the collaboration greater the productivity. We presented, also, a statistical summary to reveal the total number of publications and the number of IPEN's authors by publication, the average number of IPEN's authors per publication and the average number of publications by IPEN's author, the number of IPEN's authors that not published with no other author of the IPEN and, finally, the number of active and inactive (ex. retirees) researchers of the IPEN, as well as, the number of authors who do not have employment contract with the IPEN. (author)

Collaboration networks and research productivity at IPEN

International Nuclear Information System (INIS)

Monteiro, Carlos Anisio; Barroso, Antonio Carlos de Oliveira

2015-01-01

In this article, we investigate the IPEN's scientific collaboration network. Based on publications registered in IPEN's technical and scientific database was extracted a set of authors that developed technical and scientific work on the 2001 to 2010 period, using coauthorship to define the relationship between authors. From the data collected, we used degree centrality indicator in conjunction with two approaches to assess the relationship between collaboration and productivity: normal count, where for each publication that the author appears is added one for the author’s productivity indicator, and fractional count which is added a fractional value according to the total number of publication's authors. We concluded that collaboration for the development of a technical and scientific work has a positive correlation with the researchers productivity, that is, the greater the collaboration greater the productivity. We presented, also, a statistical summary to reveal the total number of publications and the number of IPEN's authors by publication, the average number of IPEN's authors per publication and the average number of publications by IPEN's author, the number of IPEN's authors that not published with no other author of the IPEN and, finally, the number of active and inactive (ex. retirees) researchers of the IPEN, as well as, the number of authors who do not have employment contract with the IPEN. (author)

Investigating product development strategy in beverage industry using factor analysis

Directory of Open Access Journals (Sweden)

Naser Azad

2013-03-01

Full Text Available Selecting a product development strategy that is associated with the company's current service or product innovation, based on customers’ needs and changing environment, plays an important role in increasing demand, increasing market share, increasing sales and profits. Therefore, it is important to extract effective variables associated with product development to improve performance measurement of firms. This paper investigates important factors influencing product development strategies using factor analysis. The proposed model of this paper investigates 36 factors and, using factor analysis, we extract six most influential factors including information sharing, intelligence information, exposure strategy, differentiation, research and development strategy and market survey. The first strategy, partnership, includes five sub-factor including product development partnership, partnership with foreign firms, customers’ perception from competitors’ products, Customer involvement in product development, inter-agency coordination, customer-oriented approach to innovation and transmission of product development change where inter-agency coordination has been considered the most important factor. Internal strengths are the most influential factors impacting the second strategy, intelligence information. The third factor, introducing strategy, introducing strategy, includes four sub criteria and consumer buying behavior is the most influencing factor. Differentiation is the next important factor with five components where knowledge and expertise in product innovation is the most important one. Research and development strategy with four sub-criteria where reducing product development cycle plays the most influential factor and finally, market survey strategy is the last important factor with three factors and finding new market plays the most important role.

The Potential Development of Betawi Culinary as an Ecotourism Product in Jakarta

Directory of Open Access Journals (Sweden)

Dhian Tyas Untari

2016-11-01

Full Text Available The aims of this research were to rebuild the existence of Betawi culinary. The objectives of this research were representing the values of socio-cultural of Betawi culinary, determining the aspects of supply and demand, and developing strategies to improve Betawi culinary potential as an ecotourism products. The research consists method consists of three stages. Those were representation test, market test, and arranging alternatives strategic. The results show that to improve Betawi culinary as the ecotourism products in Jakarta; it can be done with a series of strategies, classified into three classifications. Those are market penetration, market development, and product development. The result is expected to be a reference to the development of Betawi culinary ecotourismas one of the products in Jakarta.

Materials science tetrahedron--a useful tool for pharmaceutical research and development.

Science.gov (United States)

Sun, Changquan Calvin

2009-05-01

The concept of materials science tetrahedron (MST) concisely depicts the inter-dependent relationship among the structure, properties, performance, and processing of a drug. Similar to its role in traditional materials science, MST encompasses the development in the emerging field of pharmaceutical materials science and forms a scientific foundation to the design and development of new drug products. Examples are given to demonstrate the applicability of MST to both pharmaceutical research and product development. It is proposed that a systematic implementation of MST can expedite the transformation of pharmaceutical product development from an art to a science. By following the principle of MST, integration of research among different laboratories can be attained. The pharmaceutical science community as a whole can conduct more efficient, collaborative, and coherent research.

Green Chemistry Technology and Product Development. Final Report for Intermediary Biochemicals, Inc.

Energy Technology Data Exchange (ETDEWEB)

Zeikus, J. Gregory [Michigan State Univ., East Lansing, MI (United States). Dept. of Microbiology & Molecular Genetics

2010-08-28

The DOE funds in this award were applied to developing systems to cost effectively produce intermediate (1 dollar$-$1,000 dollars per kg) and fine ($1,000 per kg) chemicals from renewable feedstocks using environmentally responsible processes via collaboration with academic research laboratories to provide targeted technology and early product development. Specifically, development of a thermostable alkaline phosphatase overexpression system to provide supplies and reagents for improved biological test kits, creation of a microbial strain for the efficient production of aspartate from glucose (replacing oil-derived fumarate in aspartate production), and early development research for an electrochemical bioreactor for the conversion of glucose to mannitol were targeted by this research. Also, establishing this positive academic/industrial collaboration with Michigan State University Laboratories and fostering greater inter-laboratory collaboration would also support the strategy of efficiently transitioning academic green chemistry research into the commercial sector and open an avenue to low cost early product development coupled with scientific training.

Vegetable soybean: seed composition and production research

Directory of Open Access Journals (Sweden)

Qiuying Zhang

2017-10-01

Full Text Available Vegetable soybean (edamame [Glycine max (L. Merr.] is a low input, high nutritional value, short crop cycle and soil-enriching profitable crop. It offers quick economic return and provides health benefits to the consumers. The market demand for edamame has begun to flourish and expand dramatically in recent decades due to increased awareness of nutritional properties, and the change in life styles towards healthier food. This article highlighted the importance of edamame as a nutraceutical and functional food-grade produce, summarised the research advances in seed composition and their roles, cultivar selection and crop establishment, planting date and fertilisation, weed management and harvesting. Current production problem of extensive labor at harvest and future research challenges in improving crop establishment, developing cultivars competitive to weed and resistant to pest insects/diseases, assessing biological activities of edamame elemental and phytochemical properties on cancer cell inhibition, and developing organic production system were also proposed with aims of enhancing farm profitability and expanding opportunities for extensive use of edamame.

Medical Countermeasure Product Development - Alternatives Paper

Science.gov (United States)

2014-04-01

Maritime Research Laboratory of the Defence Science and Technology Organisation (DSTO) in 1995 as a Research Scientist. In January 1997 he was promoted... biosecurity role to supply to the Government and the World Health Organisation (WHO). In the future there may be circumstances where there is no... standards to solve national priority CBR or infectious disease threats. The PPP may enable Government to: • access and grow product development

Center for Cold Spray Research and Development

Data.gov (United States)

Federal Laboratory Consortium — This is the only DoD facility capable of cold spray research and development, production, and field-repair. It features three stationary cold spray systems used for...

Research and development of radiation utilization in 1986 at JAERI

International Nuclear Information System (INIS)

1986-01-01

In the peaceful utilization of atomic energy, in addition to the method of utilizing the energy obtained by nuclear fission and nuclear fusion as electric power or heat source, there is the field of utilizing radiation, in which the effect that radiation exerts on substances and the properties of radiation are used for measurement, analysis and others. The fields of utilizing radiation are diverse such as medicine, technology and agriculture, and those directly related to the health and daily life of people are many. Japan Atomic Energy Research Institute has positively advanced the research and development on radiation utilization, which are related to the utilization of irradiation and the production and use of radioisotopes. The former is carried out in Takasaki Radiation Chemistry Research Establishment, and the latter in the Isotope Division, Tokai Research Establishment. Also, the research and development on the radiation-withstanding properties of organic materials and the production techniques for tritium are advanced, and it is expected to begin the highly advanced scientific and technological research using ion beam. The research and development of polymer materials, the techniques of using irradiation, the production and utilization of radioisotopes and others are reported. (Kako, I.)

Current status of production and research of radioisotopes and radiopharmaceuticals in Indonesia

Energy Technology Data Exchange (ETDEWEB)

Soenarjo, Sunarhadijoso; Tamat, Swasono R. [Center for Development of Radioisotopes and Radiopharmaceuticals, National Nuclear Energy Agency (BATAN), Kawasan Puspiptek, Serpong, Tangerang (Indonesia)

2000-10-01

The use of radioactive preparation in Indonesia has sharply increased during the past years, indicated by increase of the number of companies utilizing radioisotopes during 1985 to 1999. It has been clearly stressed in the BATAN's Strategic Plan for 1994-2014 that the production of radioisotopes and radiopharmaceuticals is one of five main industrial fields within the platform of the Indonesian nuclear industry. Research programs supporting the production of radioisotopes and radiopharmaceuticals as well as development of production technology are undertaken by the Research Center for Nuclear Techniques (RCNT) in Bandung and by the Radioisotope Production Center (RPC) in Serpong, involving cooperation with other research center within BATAN, universities and hospitals as well as overseas nuclear research institution. The presented paper describes production and research status of radioisotopes and radiopharmaceuticals in Indonesia after the establishment of P.T. Batan Teknologi in 1996, a government company assigned for activities related to the commercial application of nuclear technology. The reviewed status is divided into two short periods, i.e. before and after the Chairman Decree No. 73/KA/IV/1999 declaring new BATAN organizational structure. Subsequent to the Decree, all commercial requests for radioisotopes and radiopharmaceuticals are fulfilled by P.T. Batan Teknologi, while demands on novel radioactive preparations or new processing technology, as well as research and development activities should be fulfilled by the Center for the Development of Radioisotopes and Radiopharmaceuticals (CDRR) through non-commercial arrangement. The near-future strategic research programs to response to dynamic public demand are also discussed. The status of research cooperation with JAERI (Japan) is also reported. (author)

Advances in research and development of mango industry

Directory of Open Access Journals (Sweden)

Ian S. E. Bally

2011-10-01

Full Text Available World mango production is spread over 100 countries that produce over 34.3 million tons of fruit annually. Eighty percent of this production is based in the top nine producing nations that also consume upward of 90% of their production domestically. One to 2 percent of fruit is traded internationally in to markets in the European Community, USA, Arabian Peninsula and Asia. This paper outlines some of the recent research and development advances in mango breeding and genomics, rootstock development, disease management and harvest technologies that are influencing the production and quality of mango fruit traded domestically and internationally.

Research and development of radiation utilizations in 1981 at JAERI

International Nuclear Information System (INIS)

1981-01-01

There is the field of radiation utilization such as the application of the effect of radiation on matters and the techniques of measurement and analysis utilizing the properties of radiation, in addition to the use of atomic energy as heat or electric power. The fields of application of radiation utilization are very wide, and are closely related to the health and daily life of people. The Japan Atomic Energy Research Institute has performed the research and development on radiation utilization regarding radiochemistry, the application of irradiation, and the production and industrial utilization of radioisotopes. Also, the research of the radiation resistance of organic materials used for nuclear facilities, the development of organic materials, and the production of tritium have become necessary. In this booklet, the recent results of radiation utilization in the JAERI are summarized. The research and development of ion exchange membranes, organic glasses, the fixation of living body activators and water paints, the techniques of utilizing irradiation, the techniques of radioisotope productions and utilization, and the techniques related to the development of atomic energy are reported. (Kako, I.)

Developing Techniques for Small Scale Indigenous Molybdenum-99 Production Using LEU Fission at Tajoura Research Center-Libya [Country report: Libya

International Nuclear Information System (INIS)

Alwaer, Sami M.

2015-01-01

The object of this work was to assist the IAEA by providing the Libyan country report about the Coordination Research Project (CRP), on the subject of “Developing techniques for small scale indigenous Mo-99 production using LEU-foil” which took place over five years and four RCMs. A CRP on this subject was approved in early 2005. The objectives of this CRP are to: transfer know-how in the area of 99 Mo production using LEU targets based on reference technologies from leading laboratories in the field to the participating laboratories in the CRP; develop national work plans based on various stages of technical development and objectives in this field; establish the procedures and protocols to be employed, including quality control and assurance procedures; establish the coordinated activities and programme for preparation, irradiation, and processing of LEU targets [a]; and to compare results obtained in the implementation of the technique in order to provide follow up advice and assistance. Technetium-99m ( 99m Tc), the daughter product of molybdenum-99 ( 99 Mo), is the most commonly utilized medical radioisotope in the world, used for approximately 20-25 million medical diagnostic procedures annually, comprising some 80% of all diagnostic nuclear medicine procedures. National and international efforts are underway to shift the production of medical isotopes from highly enriched uranium (HEU) to low enriched uranium (LEU) targets. A small but growing amount of the current global 99 Mo production is derived from the irradiation of LEU targets. The IAEA became aware of the interest of a number of developing Member States that are seeking to become small scale, indigenous producers of 99 Mo to meet local nuclear medicine requirements. The IAEA initiated Coordinated Research Project (CRP) T.1.20.18 “Developing techniques for small-scale indigenous production of Mo-99 using LEU or neutron activation” in order to assist countries in this field. The more

Development research in West Bank and Gaza | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

2011-01-11

Jan 11, 2011 ... ... themselves capable of productive development research under the harshest conditions of ... Building bridges in economics research: John Whalley (Canada). Canadian and Chinese economists join forces against poverty.

Books | Page 25 | IDRC - International Development Research Centre

International Development Research Centre (IDRC) Digital Library (Canada)

... to improving lives and livelihoods by supporting research that addresses critical international development issues. ... Any -, Miscellaneous, Development, Science and Technology, Social Policy, Economics ... Book cover Marketing Information Products and Services: A Primer for Librarians and Information Professionals.

First research co-ordination meeting on development of reference charged particle cross section data base for medical radioisotope production. Summary report

International Nuclear Information System (INIS)

Oblozinsky, P.

1996-03-01

The present report contains the summary of the First Research Co-ordination Meeting on ''Development of Reference Charged Particle Cross Section Data Base for Medical Radioisotope Production'', held at the IAEA Headquarters, Vienna, from 15 to 17 November 1995. The project focuses on monitor reactions and production reactions for gamma emitters and positron emitters induced with light charged particles of incident energies up to about 100 MeV. Summarized are technical discussions and the resulting work plan of the Coordinated Research Programme, including actions and deadlines. Attached are an information sheet on the project, the agenda and a list of participants of the meeting. Also attached is brief information on the adjacent Consultant's Meeting on ''Automated Synthesis Systems for the Cyclotron Production of 18 F and 123 I and their Labeled Radiopharmaceuticals''. (author)

Development of RI Target Production Technology

International Nuclear Information System (INIS)

Jeong, Do Young; Ko, Kwang Hoon; Kim, Cheol Jung; Kim, Taek Soo; Rho, Si Pyo; Park, Hyun Min; Lim, Gwon; Cha, Yong Ho; Han, Jae Min

2010-04-01

This project was accomplished with an aim of productive technical development on the 'enriched target' which is used essentially in radioisotope production. The research was advanced systematically with target production pilot system configuration and core technical development. We composed Yb-176 productive pilot system which equip the chemical purification technique of medical treatment level and proved its capability. Possibilities to separate Zn-67 by the method of using the polarizing light in principle and to separate Zn-70 by the method of using the double optical pumping in theory were also proved. RI target production technologies are recognized excessively with monopolistic techniques of part atomic energy advanced nations such as Russia and US and they are come, but we prepared the opportunity will be able to complete a full cycle of like (RI material production -> RI target production -> RI application) with this project accomplishment. When considering only the direct demand of stable isotope which is used in various industrial, we forecast with the fact that RI target markets will become larger with the approximately 5 billion dollars in 2020 and this technology will contribute in the domestic rising industry creation with high value added

Drivers of Changes in Product Development Rules

DEFF Research Database (Denmark)

Christiansen, John K.; Varnes, Claus J.

2015-01-01

regimes. However, the analysis here indicates that there are different drivers, both internal and external, that cause companies to adopt new rules or modify their existing ones, such as changes in organizational structures, organizational conflicts, and changes in ownership or strategy. In addition......Purpose: - The purpose of this research is to investigate the drivers that induce companies to change their rules for managing product development. Most companies use a form of rule-based management approach, but surprisingly little is known about what makes companies change these rules...... 10 years based on three rounds of interviews with 40 managers. Findings: - Previous research has assumed that the dynamics of product development rules are based on internal learning processes, and that increasingly competent management will stimulate the implementation of newer and more complex rule...

Development of post-irradiation test facility for domestic production of 99Mo

International Nuclear Information System (INIS)

Taguchi, Taketoshi; Yonekawa, Minoru; Kato, Yoshiaki; Kurosawa, Makoto; Nishikata, Kaori; Ishida, Takuya; Kawamata, Kazuo

2013-01-01

JMTR focus on the activation method. By carrying out the preliminary tests using irradiation facilities existing, and verification tests using the irradiation facility that has developed in the cutting-edge research and development strategic strengthening business, as irradiation tests towards the production of 99 Mo, we have been conducting research and development that can contribute to supply about 25% for 99 Mo demand in Japan and the stable supply of radiopharmaceutical. This report describes a summary of the status of the preliminary tests for the production of 99 Mo: Maintenance of test equipment in the facility in JMTR hot laboratory in preparation for research and development for the production of 99 Mo in JMTR and using MoO 3 pellet irradiated at Kyoto University Research Reactor Institute (KUR). (author)

Production of wood derived fuels. Review of research projects; Puupolttoaineiden tuotantotekniikka. Tutkimusalueen katsaus

Energy Technology Data Exchange (ETDEWEB)

Korpilahti, A [Metsaeteho Oy, Helsinki (Finland)

1997-12-01

The research and development work was very active on the area of wood derived fuels during the past year 1996. Totally some 40 projects were going on, and till the end of the year about 15 projects were completed. The projects broadly covered the research area focusing from material flows, productivity studies, basic wood properties to several case studies. When new production methods and machinery was introduced earlier by demonstration projects, now they were investigated by follow up projects. The economical and quality results of logging residue harvesting and comminution seem quite satisfactory, but integrated methods and production chains still need research and development. (orig.)

Systematic Product Development of Control and Diagnosis Functionalities

Science.gov (United States)

Stetter, R.; Simundsson, A.

2017-01-01

In the scientific field of systematic product development a wide range of helpful methods, guidelines and tools were generated and published in recent years. Until now little special attention was given to design guidelines aiming at supporting product development engineers to design products that allow and support control or diagnosis functions. The general trend to ubiquitous computing and the first development steps towards cognitive systems as well as a general trend toward higher product safety, reliability and reduced total cost of ownership (TCO) in many engineering fields lead to a higher importance of control and diagnosis. In this paper a first attempt is made to formulate general valid guidelines how products can be developed in order to allow and to achieve effective and efficient control and diagnosis. The guidelines are elucidated on the example of an automated guided vehicle. One main concern of this paper is the integration of control and diagnosis functionalities into the development of complete systems which include mechanical, electrical and electronic subsystems. For the development of such systems the strategies, methods and tools of systematic product development have attracted significant attention during the last decades. Today, the functionality and safety of most products is to a large degree dependent on control and diagnosis functionalities. Still, there is comparatively little research concentrating on the integration of the development of these functionalities into the overall product development processes. The paper starts with a background describing Systematic Product Development. The second section deals with the product development of the sample product. The third part clarifies the notions monitoring, control and diagnosis. The following parts summarize some insights and formulate first hypotheses concerning control and diagnosis in Systematic Product Development.

Transitions in Sustainable Product Design Research

DEFF Research Database (Denmark)

Boks, Casper; McAloone, Tim C.

2009-01-01

By the early 1990s, sustainable product innovation (or ecodesign, or Design for environment) had gained sufficient critical mass in academic research to be identified as a distinct research area. In the past 15 years, stimulated by a growing environmental concern and awareness in the media...... of transitions; this is illustrated by discussing characteristic aspects of each transition, which together provide a historic account of how academic research into sustainable product innovation had matured. In conclusion, a number of possible future transitions or extensions of the research area are discussed......., this research area has expanded considerably; from a bunch of opportunistic eco-pathfinders trying to make products better recyclable into acknowledged scientific research regarding technology transfer and commercialisation. This paper proposes that this maturing process took place through a number...

7 CFR 985.31 - Research and development proj-ects.

Science.gov (United States)

2010-01-01

..., may establish or provide for the establishment of production research, marketing research and... 7 Agriculture 8 2010-01-01 2010-01-01 false Research and development proj-ects. 985.31 Section 985.31 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING...

Product developers are unanimous: Maintain the pace or lose the race

Energy Technology Data Exchange (ETDEWEB)

Leisio, C.

1997-11-01

Researchers and product developers seldom have the opportunity to publicly express their views on the importance of their work. Usually this is done by the company directors or those who pay for the work - the customers. In the following article, however, four distinguished experts working in the IVO Group present their views on their work in the sphere of research and product development

Collaborative Product Development in an R&D Environment

Science.gov (United States)

Davis, Jose M.; Keys, L. Ken; Chen, Injazz J.; Peterson, Paul L.

2004-01-01

Research and development (R&D) organizations are being required to be relevant, to be more application-oriented, and to be partners in the strategic management of the business while meeting the same challenges as the rest of the organization, namely: (1) reduced time to market; (2) reduced cost; (3) improved quality; (4) increased reliability; and (5) increased focus on customer needs. Recent advances in computer technology and the Internet have created a new paradigm of collaborative engineering or collaborative product development (CPD), from which new types of relationships among researchers and their partners have emerged. Research into the applicability and benefits of CPD in a low/no production, R&D, and/or government environment is limited. In addition, the supply chain management (SCM) aspects of these relationships have not been studied. This paper presents research conducted at the NASA Glenn Research Center (GRC) investigating the applicability of CPD and SCM in an R&D organization. The study concentrates on the management and implementation of space research activities at GRC. Results indicate that although the organization is engaged in collaborative relationships that incorporate aspects of SCM, a number of areas, such as development of trust and information sharing merit special attention.

Impact of research investment on scientific productivity of junior researchers.

Science.gov (United States)

Farrokhyar, Forough; Bianco, Daniela; Dao, Dyda; Ghert, Michelle; Andruszkiewicz, Nicole; Sussman, Jonathan; Ginsberg, Jeffrey S

2016-12-01

There is a demand for providing evidence on the effectiveness of research investments on the promotion of novice researchers' scientific productivity and production of research with new initiatives and innovations. We used a mixed method approach to evaluate the funding effect of the New Investigator Fund (NIF) by comparing scientific productivity between award recipients and non-recipients. We reviewed NIF grant applications submitted from 2004 to 2013. Scientific productivity was assessed by confirming the publication of the NIF-submitted application. Online databases were searched, independently and in duplicate, to locate the publications. Applicants' perceptions and experiences were collected through a short survey and categorized into specified themes. Multivariable logistic regression was performed. Odds ratios (OR) with 95 % confidence intervals (CI) are reported. Of 296 applicants, 163 (55 %) were awarded. Gender, affiliation, and field of expertise did not affect funding decisions. More physicians with graduate education (32.0 %) and applicants with a doctorate degree (21.5 %) were awarded than applicants without postgraduate education (9.8 %). Basic science research (28.8 %), randomized controlled trials (24.5 %), and feasibility/pilot trials (13.3 %) were awarded more than observational designs (p   scientific productivity and professional growth of novice investigators and production of research with new initiatives and innovations. Further efforts are recommended to enhance the support of small grant funding programs.

Development of wind power production in arctic climate

Energy Technology Data Exchange (ETDEWEB)

Peltola, E.; Kaas, J.; Aarnio, E. [Kemijoki Oy (Finland)

1998-10-01

The project Development of wind power production in arctic climate is a direct continuation of Arctic wind energy research project, which started in 1989. The main topics in 1996-97 have been production development and commercialising the blade heating systems, development of operation and maintenance practices of arctic wind power plants, preparations for new wind farms and various network connection and energy system studies. Practical operations have taken place in Pyhaetunturi test power plant and in Paljasselkae and Lammashovi power plants, which are in commercial operation

Natural product derived insecticides: discovery and development of spinetoram.

Science.gov (United States)

Galm, Ute; Sparks, Thomas C

2016-03-01

This review highlights the importance of natural product research and industrial microbiology for product development in the agricultural industry, based on examples from Dow AgroSciences. It provides an overview of the discovery and development of spinetoram, a semisynthetic insecticide derived by a combination of a genetic block in a specific O-methylation of the rhamnose moiety of spinosad coupled with neural network-based QSAR and synthetic chemistry. It also emphasizes the key role that new technologies and multidisciplinary approaches play in the development of current spinetoram production strains.

New product- Electric bike’s development in Finland

OpenAIRE

Pan, Yiding

2010-01-01

ABSTRACT The thesis highlights the development of a new product in Finnish market. According to international marketing knowledge, a marketing plan should be made to improve the strategy of the product’s development in four aspects. These are product, price, promotion and place. After a failing business experience in Nordic China Centre, Nordic Interflow wants to do the marketing research for the Chinese market, Finnish customers and Finnish competitors. The purpose of this thesis was...

Stimuli of Collaboration in Product Development: A Case Study in a Project Manufacturing Company

Directory of Open Access Journals (Sweden)

Jääskeläinen Aki

2017-12-01

Full Text Available There is already a wide acceptance on the importance of involving supplier and customer companies in product development. Decent understanding prevails on the relationship-oriented approach to product development including various collaboration forms. However, there is less research on the factors explaining the decision of attending to joint product development. In addition, less studies have examined the integrated role of both suppliers and customers in product development initiatives. This study searches answers to the following research questions: 1. What is the role of different actors in product development initiatives? 2. What factors motivate suppliers and customers to participate in product development? The research is carried out as an in-depth qualitative single case study in a large project manufacturing company. It takes the perspective of a focal company striving for product improvements. The first part of the empirical study consists of 15 semi-structured interviews. The second part includes two discursive workshops and builds upon the results of the interviews. This study contributes to the existing research by explaining the challenges and conditions facilitating joint product development with supplier and purchaser companies. The results highlight the role of customers in improving the effectiveness of product development. As a practical contribution, the paper reports the application of workshop method as a facilitator of collaboration between supplier, purchaser (focal company and customer companies.

Research and development in power plant engineering

International Nuclear Information System (INIS)

Riedle, K.; Taud, R.

2001-01-01

Research and development are a bridge for visions that are escorted to a successful market introduction. Also in power plant engineering, research and development are a lever with which the product power plant, its technology and processes can be adapted to the quickly changing future market. In the overview given by this paper, therefore at first the development boosters and targets are outlined from the viewpoint of the market; then the available technology portfolio is addressed in a concise way. Targets for the development can be seen from the support programmes of the governments. Before a preview is given, some development topics from the point of view of the manufacturer are introduced. (orig.) [de

Radioisotope research, production, and processing at the University of Missouri Research Reactor

International Nuclear Information System (INIS)

Ehrhardt, G.J.; Ketring, A.R.; Ja, Wei; Ma, D.; Zinn, K.; Lanigan, J.

1995-01-01

The University of Missouri Research Reactor (MURR) is a 10 MW, light-water-cooled and moderated research reactor which first achieved criticality in 1996 and is currently the highest powered university-owned research reactor in the U.S. For many years a major supplier of reactor-produced isotopes for research and commercial purposes, in the last 15 years MURR has concentrated on development of reactor-produced beta-particle emitters for experimental use in nuclear medicine therapy of cancer and rheumatoid arthritis. MURR has played a major role in the development of bone cancer pain palliation with the agents 153 Sm EDTMP and 186 Re/ 188 Re HEDP, as well as in the use of 186 Re, 177 Lu, 166 Ho, and 105 Rh for radioimmunotherapy and receptor-agent-guided radiotherapy. MURR is also responsible for the development of therapeutic, 90 Y-labeled glass microspheres for the treatment of liver tumors, a product ( 90 Y Therasphere trademark) which is currently an approved drug in Canada. MURR has also pioneered the development of 188 W/ 188 Re and 99 Mo/ 99m Tc gel generators, which make the use of low specific activity 188 W and 99 Mo practical for such isotope generators

Research Productivity and Its Policy Implications in Higher Education Institutions

Science.gov (United States)

Quimbo, Maria Ana T.; Sulabo, Evangeline C.

2014-01-01

Responding to the Commission on Higher Education's development plan of enhancing research culture among higher education institutions, this study was conducted to analyze the research productivity of selected higher education institutions. It covered five state universities in the Philippines where a total of 377 randomly selected faculty members…

Facilities for Research and Development of Medical Radioisotopes

International Nuclear Information System (INIS)

Shin, Byung Chul; Choung, Won Myung; Park, Jin Ho

2003-03-01

This study is carried out by KAERI(Korea Atomic Energy Research Institute) to construct the basic facilities for development and production of medical radioisotope. For the characteristics of radiopharmaceuticals, the facilities should be complied with the radiation shield and GMP(Good Manufacturing Practice) guideline. The KAERI, which has carried out the research and development of the radiopharmaceuticals, made a design of these facilities and built them in the HANARO Center and opened the technique and facilities to the public to give a foundation for research and development of the radiopharmaceuticals. In the facilities, radiation shielding utilities and GMP instruments were set up and their operating manuals were documented. Every utilities and instruments were performed the test to confirm their efficiency and the approval for use of the facilities will be achieved from MOST(Ministry of Science and Technology). It is expected to be applied in development of therapeutic radioisotope such as Re-188 generator and Ho-166, as well as Tc-99m generator and Sr-89 chloride for medical use. And it also looks forward to the contribution to the related industry through the development of product in high demand and value

International activities on research and production in ceramics. ; Development of overseas business-optical fiber. Kenkyu kaihatsu, seisan katsudo no kokusaika. ; Hikari faiba no kaigai seisan

Energy Technology Data Exchange (ETDEWEB)

Egami, K. (Corning International K.K., Tokyo (Japan))

1994-04-01

Researchers of the Corning Glass Works have made great contribution to the development of practical use of optical fibers. The effort of the Corning Glass Works in technological development and overseas production was introduced. Corning developed the outer vapor deposition (OVD) method suitable for large scale production. Later, the so-called vertical axial deposition (VAD) method was developed also in Japan, and a technology for quantity production of high quality optical fibers was established. The bases of the Corning's approach were respect for intellectual property and strategic market development, indicating that Corning had strategy for overseas production from the early stage (early stage of market growth) in addition to product supply strategy. Optical fiber is one of the strategic materials whose export is controlled in many countries, and the transfer of the related technology is also controlled. 1 fig.

The development of regional markets of eggs production in Russia

Directory of Open Access Journals (Sweden)

Natal'ya Anatol'evna Alekseeva

2011-12-01

Full Text Available The current state of regional markets development and the production of eggs and egg products for a long period — from 1990 to 2009 — is reviewed in this paper. The main research method is the method of statistical groupings. The variable amount of egg production was chosen as the grouping characteristic, since this figure fits well into research goals and has the property of the prevalence in the aggregate / total. To analyze the trends of the Russian regional markets involved into egg production, official statistics on consumer prices was used as well as producer prices, the volume of egg production per capita based on food import and export products. This allowed to group regions for comparison with average values of indicators carried out by different criteria, and to draw conclusions about trends in the development of regional markets. The most relevant factors influencing the development of egg production, among which the factor of vertical integration of production was especially noticed: building own plants and feed mills, joining the land in order to ensure the needs for higher quality raw materials and other activities were identified.

Market-based process and product innovation in the food sector: A Danish research programme

DEFF Research Database (Denmark)

Grunert, Klaus G.; Baadsgaard, Allan

1992-01-01

This note informs about the Danish MAPP research programme, a collection of 15 research projects aimed at making product and process innovation in the food sector more market-based. The programme, which has an interdisciplinary base, but is geared towards marketing applications, is concerned...... with the organization of the innovation process, the interaction of consumer and producer criteria in product development, the assessment of long-term developments in the market environment and the role distribution system in product innovation. Innovation in both primary production and processing are considered....

New Sustainable Tourism Product Development for Russian Customers

OpenAIRE

Racheeva, Polina

2015-01-01

Sustainable tourism is a new concept for tourism sector; it is tourism that reduces negative tourism impacts and brings benefits instead. The current problem of sustainable tourism is lack of attractive tourism products. Their development is crucial since customers seek for experiences at a destination. Russians are an important segment for Finnish tourism, therefore their consumer behaviours has to be studied. The aim of this research is to find how to develop a tourism product for susta...

Managing scientists leadership strategies in research and development

CERN Document Server

Sapienza, Alice M

1995-01-01

Managing Scientists Leadership Strategies in Research and Development Alice M. Sapienza "I found ...this book to be exciting ...Speaking as someone who has spent 30 years grappling with these issues, I certainly would be a customer." -Robert I. Taber, PhD Senior Vice President of Research & Development Synaptic Pharmaceutical Corporation In today's climate of enormous scientific and technologic competition, it is more crucial than ever that scientists involved in research and development be managed well. Often trained as individual researchers, scientists can find integration into teams difficult. Managers, from both scientific and nonscientific backgrounds, who are responsible for these teams frequently find effective team building a long and challenging process. Managing Scientists offers strategies for fostering communication and collaboration among scientists. It shows how to build cohesive, productive, and focused teams to succeed in the competitive research and development marketplace. This book wil...

The application of lean principles in product development

DEFF Research Database (Denmark)

Bjarnø, Ole-Christian

2007-01-01

Although Lean Manufacturing has been a megatrend for several years, its principles have not been broadly applied in product development processes. We have therefore found it useful to look into the theories of lean manufacturing and to discuss how and to what extent they could be applied in the p......Although Lean Manufacturing has been a megatrend for several years, its principles have not been broadly applied in product development processes. We have therefore found it useful to look into the theories of lean manufacturing and to discuss how and to what extent they could be applied...... in the product development processes, and this study is compared with industrial practices in several front running companies in Denmark. From this research a suggestion for a framework and a tool-box for lean product development is created and discussed from a HR management, an implementation, an operational...

Biocatalyzed processes for production of commodity chemicals: Assessment of future research advances for N-butanol production

Science.gov (United States)

Ingham, J. D.

1984-01-01

This report is a summary of assessments by Chem Systems Inc. and a further evaluation of the impacts of research advances on energy efficiency and the potential for future industrial production of acetone-butanol-ethanol (ABE) solvents and other products by biocatalyzed processes. Brief discussions of each of the assessments made by CSI, followed by estimates of minimum projected energy consumption and costs for production of solvents by ABE biocatalyzed processes are included. These assessments and further advances discussed in this report show that substantial decreases in energy consumption and costs are possible on the basis of specific research advances; therefore, it appears that a biocatalyzed process for ABE can be developed that will be competitive with conventional petrochemical processes for production of n-butanol and acetone. (In this work, the ABE process was selected and utilized only as an example for methodology development; other possible bioprocesses for production of commodity chemicals are not intended to be excluded.) It has been estimated that process energy consumption can be decreased by 50%, with a corresponding cost reduction of 15-30% (in comparison with a conventional petrochemical process) by increasing microorganism tolerance to n-butanol and efficient recovery of product solvents from the vapor phase.

Bioenergy Research Programme, Yearbook 1995. Production of wood fuels; Bioenergian tutkimusohjelma, vuosikirja 1995. Puupolttoaineen tuotantotekniikka

Energy Technology Data Exchange (ETDEWEB)

Alakangas, E [ed.

1997-12-31

Bioenergy Research Programme is one of the energy technology research programmes of the Technology Development Center TEKES. The aim of the Bioenergy Research Programme is to increase, by using technical research and development, the economically profitable and environmentally sound utilisation of bioenergy, to improve the competitiveness of present peat and wood fuels, and to develop new competitive fuels and equipment related to bioenergy. The funding for 1995 was nearly 52 million FIM and the number of projects 66. The main goal of the wood fuels research area is to develop new production methods in order to decrease the production costs to the level of imported fuels. The total potential of the wood fuel use should be at least 1.0 million toe/a (5.5 million m{sup 3}). During the year 1995 There were over 30 projects concerning the production of wood derived fuels going on. Nearly half of them focused on integrated production of pulp wood and wood fuel. About ten projects was carried out to promote the wood fuel production from logging residues. Other topics were firewood production, production logistics and wood fuel resources. For production of fuel chips from logging residues, a new chipper truck, MOHA-SISU, was introduced. The new machine gives a new logistic solution resulting in high productivity and reasonable operating costs. In Mikkeli region three years of active work promoted the usage of wood fuel in a district power plant to the level of over 110 000 m{sup 3} of fuel chips. The production costs tend to be a little high in average, and the production chain still needs to be improved

Bioenergy Research Programme, Yearbook 1995. Production of wood fuels; Bioenergian tutkimusohjelma, vuosikirja 1995. Puupolttoaineen tuotantotekniikka

Energy Technology Data Exchange (ETDEWEB)

Alakangas, E. [ed.

1996-12-31

Bioenergy Research Programme is one of the energy technology research programmes of the Technology Development Center TEKES. The aim of the Bioenergy Research Programme is to increase, by using technical research and development, the economically profitable and environmentally sound utilisation of bioenergy, to improve the competitiveness of present peat and wood fuels, and to develop new competitive fuels and equipment related to bioenergy. The funding for 1995 was nearly 52 million FIM and the number of projects 66. The main goal of the wood fuels research area is to develop new production methods in order to decrease the production costs to the level of imported fuels. The total potential of the wood fuel use should be at least 1.0 million toe/a (5.5 million m{sup 3}). During the year 1995 There were over 30 projects concerning the production of wood derived fuels going on. Nearly half of them focused on integrated production of pulp wood and wood fuel. About ten projects was carried out to promote the wood fuel production from logging residues. Other topics were firewood production, production logistics and wood fuel resources. For production of fuel chips from logging residues, a new chipper truck, MOHA-SISU, was introduced. The new machine gives a new logistic solution resulting in high productivity and reasonable operating costs. In Mikkeli region three years of active work promoted the usage of wood fuel in a district power plant to the level of over 110 000 m{sup 3} of fuel chips. The production costs tend to be a little high in average, and the production chain still needs to be improved

An Exploratory Study of Crises in Product Development

DEFF Research Database (Denmark)

Muenzberg, Christopher; Gericke, K.; Oehmen, Josef

2016-01-01

, which leads to the absence of crisis-specific design support [Münzberg et al.2015]. We conducted an explorative interview study to address the first research question. In this study 15 experienced design engineers were interviewed about their experiences with crises. We documented their understanding...... the interview results, by reflecting them against product development success factors [Gericke et al. 2013]. We propose these as a design support tool for crises, which is suitable for industrial practice. By answering the two questions, this paper contributes to theory by identifying "context factors", which...... of the interview study. In Section 4, crises are characterised and example situations are presented. Section 5 focuses on success factors. Section 6 closes with a discussion and conclusion, examining the answers to the research questions and developing a novel definition of crises in product development....

RESEARCH AND DEVELOPMENT INTO HERBAL MEDICINES ...

African Journals Online (AJOL)

Recent advances in the Research and development of Herbal Medicines are highlighted and a scheme for R & D work is presented. The need for adequate information (chemical, biological, botanical and so on) on local plants is highlighted. There is also the need to standardize the herbal product, prepare it in an ...

Polyphonic inquiry for team development, learning and knowledge production

DEFF Research Database (Denmark)

Hansen, Lone Hersted; Madsen, Charlotte Øland

2018-01-01

In this chapter we describe how we, as researchers, interacted with practitioners in the field as we co-constructed a polyphonic inquiry for team development, learning and knowledge production, inspired by action research. We build on social constructionist meta-theoretical ideas and write about...... our experience from a constructionist approach to research and social change. Our practice was developed and refined while working together with a team of advisers in an NGO for organic farming and organic food production located in Denmark. In overall terms, and in line with the values...... of the organization, a basic principle of this practice was to think and work in terms of sustainability, environmental care, and social responsibility. We undertake research as a form of social action as described by Sheila McNamee (2010), Sheila McNamee and Dian Marie Hosking (2013), and Kenneth J. Gergen (2015...

Data and Data Products for Climate Research: Web Services at the Asia-Pacific Data-Research Center (APDRC)

Science.gov (United States)

DeCarlo, S.; Potemra, J. T.; Wang, K.

2012-12-01

The International Pacific Research Center (IPRC) at the University of Hawaii maintains a data center for climate studies called the Asia-Pacific Data-Research Center (APDRC). This data center was designed within a center of excellence in climate research with the intention of serving the needs of the research scientist. The APDRC provides easy access to a wide collection of climate data and data products for a wide variety of users. The data center maintains an archive of approximately 100 data sets including in-situ and remote data, as well as a range of model-based output. All data are available via on-line browsing tools such as a Live Access Server (LAS) and DChart, and direct binary access is available through OPeNDAP services. On-line tutorials on how to use these services are now available. Users can keep up-to-date with new data and product announcements via the APDRC facebook page. The main focus of the APDRC has been climate scientists, and the services are therefore streamlined to such users, both in the number and types of data served, but also in the way data are served. In addition, due to the integration of the APDRC within the IPRC, several value-added data products (see figure for an example using Argo floats) have been developed via a variety of research activities. The APDRC, therefore, has three main foci: 1. acquisition of climate-related data, 2. maintenance of integrated data servers, and 3. development and distribution of data products The APDRC can be found at http://apdrc.soest.hawaii.edu. The presentation will provide an overview along with specific examples of the data, data products and data services available at the APDRC.; APDRC product example: gridded field from Argo profiling floats

Nuclear platform research and development - 2008-09 highlights

International Nuclear Information System (INIS)

Sadhankar, R.R.

2009-08-01

The Nuclear Platform R and D Program has lead responsibility for the maintenance and further development of the CANDU intellectual property covering the safety, licensing and design basis for nuclear facilities. The Nuclear Platform R and D Program is part of the Research and Technology Operation (RTO) unit of AECL and is managed through the Research and Development division, which has responsibility for maintaining and enhancing the knowledge and technology base. The RTO is also responsible for managing AECL's nuclear facilities and infrastructure (including laboratories and R and D facilities), the nuclear waste management program and other legacy liabilities (e.g., decommissioning) to demonstrate and grow shareholder value. The Nuclear Platform also provides the technology base from which new products and services can be developed to meet customer needs (including ACR and commercial products and services). (author)

Productivity Research and Development Planning Workshop.

Science.gov (United States)

1986-03-01

mission. These ideas must come from everyone in all echelons of the Comand. The MAC quality of worklife efforts consist of quality circles, labor-manage...that would not have been captured by the measure as initially formulated by the PIG. The balance of the plan and recommenda- tions made by the PMWG...people are doing things. We have the suggestion program, the quality of worklife program, and the Tech Mod program. All of these programs are productivity

Strategy for research and development connected to production o fliquid biofuels; Strategi for forskning og udvikling vedr. fremstilling af flydende biobraendstoffer

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-06-01

In many large industrialised countries it is expected that engine fuels manufactured from biomass will play an increasing role, especially considering security of supply, reduction of CO{sub 2} emission and increasing rate of employment within farming. The price of biofuel will, however, even in the long term, depending on the biomass and the technology used for production, easily remain significantly higher than the price of the fossil fuel, which biofuel substitutes. The most relevant biofuels today are ethanol and RME (rape seed methyl ester - bio diesel). As regards new technology for ethanol production, a significant knowledge base has been built in Denmark in research collaboration between DTU-BioCentrum and Risoe National Laboratory. The Danish research efforts should primarily focus on development of technology and know-how that can be patented and commercialised internationally and furthermore can be used for establishing a biofuel production in Denmark. (BA)

Development of Technology and Installation for Biohydrogen Production

Science.gov (United States)

Pridvizhkin, S. V.; Vyguzova, M. A.; Bazhenov, O. V.

2017-11-01

The article discusses the method for hydrogen production and the device this method application. The relevance of the use of renewable fuels and the positive impact of renewable energy on the environment and the economy is also considered. The presented technology relates to a method for hydrogen production from organic materials subject to anaerobic fermentation, such as the components of solid municipal waste, sewage sludge and agricultural enterprises wastes, sewage waste. The aim of the research is to develop an effective eco-friendly technology for hydrogen producing within an industrial project To achieve the goal, the following issues have been addressed in the course of the study: - development of the process schemes for hydrogen producing from organic materials; - development of the technology for hydrogen producing; - optimization of a biogas plant with the aim of hydrogen producing at one of the fermentation stages; - approbation of the research results. The article is recommended for engineers and innovators working on the renewable energy development issues.

Rapeseed research and production in China

Directory of Open Access Journals (Sweden)

Qiong Hu

2017-04-01

Full Text Available Rapeseed (Brassica napus L. is the largest oilseed crop in China and accounts for about 20% of world production. For the last 10 years, the production, planting area, and yield of rapeseed have been stable, with improvement of seed quality and especially seed oil content. China is among the leading countries in rapeseed genomic research internationally, having jointly with other countries accomplished the whole genome sequencing of rapeseed and its two parental species, Brassica oleracea and Brassica rapa. Progress on functional genomics including the identification of QTL governing important agronomic traits such as yield, seed oil content, fertility regulation, disease and insect resistance, abiotic stress, nutrition use efficiency, and pod shattering resistance has been achieved. As a consequence, molecular markers have been developed and used in breeding programs. During 2005–2014, 215 rapeseed varieties were registered nationally, including 210 winter- and 5 spring-type varieties. Mechanization across the whole process of rapeseed production was investigated and operating instructions for all relevant techniques were published. Modern techniques for rapeseed field management such as high-density planting, controlled-release fertilizer, and biocontrol of disease and pests combined with precision tools such as drones have been developed and are being adopted in China. With the application of advanced breeding and production technologies, in the near future, the oil yield and quality of rapeseed varieties will be greatly increased, and more varieties with desirable traits, especially early maturation, high yield, high resistance to biotic and abiotic stress, and suitability for mechanized harvesting will be developed. Application of modern technologies on the mechanized management of rapeseed will greatly increase grower profit.

Sustainability Assessment Model in Product Development

Science.gov (United States)

Turan, Faiz Mohd; Johan, Kartina; Nor, Nik Hisyamudin Muhd; Omar, Badrul

2017-08-01

Faster and more efficient development of innovative and sustainable products has become the focus for manufacturing companies in order to remain competitive in today’s technologically driven world. Design concept evaluation which is the end of conceptual design is one of the most critical decision points. It relates to the final success of product development, because poor criteria assessment in design concept evaluation can rarely compensated at the later stages. Furthermore, consumers, investors, shareholders and even competitors are basing their decisions on what to buy or invest in, from whom, and also on what company report, and sustainability is one of a critical component. In this research, a new methodology of sustainability assessment in product development for Malaysian industry has been developed using integration of green project management, new scale of “Weighting criteria” and Rough-Grey Analysis. This method will help design engineers to improve the effectiveness and objectivity of the sustainable design concept evaluation, enable them to make better-informed decisions before finalising their choice and consequently create value to the company or industry. The new framework is expected to provide an alternative to existing methods.

Developments in radioisotope production and labelling of radiopharmaceuticals

International Nuclear Information System (INIS)

Lambrecht, R.M.

1998-01-01

Recent developments in both reactor and accelerator production of radioisotopes finding applications in nuclear medicine and in biomedical research are summarised. The priorities for the production of 48 different cyclotron radioisotopes; and for 42 reactor produced radioisotopes finding biomedical applications are identified. Each includes 5 generator systems. The rapid expansion of cyclotron based radioisotope production and automated synthesis of short-lived radiopharmaceuticals with the position-emitting radionuclides continues to gain momentum. Recent feasibility studies of the cyclotron production of 186 Re, 99m Tc and of 99 Mo are cited as examples of motivation to develop accelerator alternatives to use of nuclear reactors for medical radioisotope production. Examples of SPET and PET radiopharmaceuticals labelled with 131 I, 123 I, 124 I, 18 F, and with therapeutic radionuclides are highlighted. (author)

New Product Development in Traditional Industries: Decision-Making Revised

Directory of Open Access Journals (Sweden)

Jon Mikel Zabala-Iturriagagoitia

2012-02-01

Full Text Available This paper investigates whether decisions considered as common in new product development literature are also valid in a region characterized by traditional industries. The research is grounded on innovative companies in the Valencian Region (Spain. Using the statistical tool of factor analysis, we test if the groups of decisions identified by the literature can be confirmed in our empirical sample. Therewith, we aim to link the theoretical and empirical fields in the context of new product development and product innovation management.

Developing engineering processes through integrated modelling of product and process

DEFF Research Database (Denmark)

Nielsen, Jeppe Bjerrum; Hvam, Lars

2012-01-01

This article aims at developing an operational tool for integrated modelling of product assortments and engineering processes in companies making customer specific products. Integrating a product model in the design of engineering processes will provide a deeper understanding of the engineering...... activities as well as insight into how product features affect the engineering processes. The article suggests possible ways of integrating models of products with models of engineering processes. The models have been tested and further developed in an action research study carried out in collaboration...... with a major international engineering company....

A REVIEW OF ESTIMATION OF SOFTWARE PRODUCTS DEVELOPMENT COSTS

Directory of Open Access Journals (Sweden)

Edin Osmanbegović

2017-01-01

Full Text Available In the modern business and management of business processes, the standardization of procedures allows the creation of added value, increasing competitiveness and success in the business of an organization. Evaluation of the budget for software development is crucial to the success of an IT project, because the inability to make a realistic assessment leads to inadequate project plans, customer dissatisfaction, poor quality of software products, and reduced profits. In order to minimize such situations, making accurate and reliable software cost estimation should be carried out at all stages of the project life cycle. Although hundreds of research articles focusing on the application of different methods of budget estimates of the software product have been published so far, there is no comprehensive review of the current situation or review of research trends in the budget estimates of the software product. This paper aims to create a framework for estimation of costs of development of software products by providing an overview of the most influential researchers, the most influential articles published in the WoS database, the most used keywords for searching the articles, as well as a review of the estimation techniques used in budget estimates of the software product.

User Experience Evaluation Methods in Product Development (UXEM'09)

Science.gov (United States)

Roto, Virpi; Väänänen-Vainio-Mattila, Kaisa; Law, Effie; Vermeeren, Arnold

High quality user experience (UX) has become a central competitive factor of product development in mature consumer markets [1]. Although the term UX originated from industry and is a widely used term also in academia, the tools for managing UX in product development are still inadequate. A prerequisite for designing delightful UX in an industrial setting is to understand both the requirements tied to the pragmatic level of functionality and interaction and the requirements pertaining to the hedonic level of personal human needs, which motivate product use [2]. Understanding these requirements helps managers set UX targets for product development. The next phase in a good user-centered design process is to iteratively design and evaluate prototypes [3]. Evaluation is critical for systematically improving UX. In many approaches to UX, evaluation basically needs to be postponed until the product is fully or at least almost fully functional. However, in an industrial setting, it is very expensive to find the UX failures only at this phase of product development. Thus, product development managers and developers have a strong need to conduct UX evaluation as early as possible, well before all the parts affecting the holistic experience are available. Different types of products require evaluation on different granularity and maturity levels of a prototype. For example, due to its multi-user characteristic, a community service or an enterprise resource planning system requires a broader scope of UX evaluation than a microwave oven or a word processor that is meant for a single user at a time. Before systematic UX evaluation can be taken into practice, practical, lightweight UX evaluation methods suitable for different types of products and different phases of product readiness are needed. A considerable amount of UX research is still about the conceptual frameworks and models for user experience [4]. Besides, applying existing usability evaluation methods (UEMs) without

Radioisotope research, production, and processing at the University of Missouri Research Reactor

Energy Technology Data Exchange (ETDEWEB)

Ehrhardt, G.J.; Ketring, A.R.; Ja, Wei; Ma, D.; Zinn, K.; Lanigan, J.

1995-12-31

The University of Missouri Research Reactor (MURR) is a 10 MW, light-water-cooled and moderated research reactor which first achieved criticality in 1996 and is currently the highest powered university-owned research reactor in the U.S. For many years a major supplier of reactor-produced isotopes for research and commercial purposes, in the last 15 years MURR has concentrated on development of reactor-produced beta-particle emitters for experimental use in nuclear medicine therapy of cancer and rheumatoid arthritis. MURR has played a major role in the development of bone cancer pain palliation with the agents {sup 153}Sm EDTMP and {sup 186}Re/{sup 188}Re HEDP, as well as in the use of {sup 186}Re, {sup 177}Lu, {sup 166}Ho, and {sup 105}Rh for radioimmunotherapy and receptor-agent-guided radiotherapy. MURR is also responsible for the development of therapeutic, {sup 90}Y-labeled glass microspheres for the treatment of liver tumors, a product ({sup 90}Y Therasphere{trademark}) which is currently an approved drug in Canada. MURR has also pioneered the development of {sup 188}W/{sup 188}Re and {sup 99}Mo/{sup 99m}Tc gel generators, which make the use of low specific activity {sup 188}W and {sup 99}Mo practical for such isotope generators.

Traditional products: Base for the sustainable development of Serbian animal origin products

Directory of Open Access Journals (Sweden)

Stevanović Jasna Lj.

2016-01-01

Full Text Available Research results on the diversity of traditional products of animal origin from certain areas of the Republic of Serbia, provides an opportunity to become part of the sustainable quality development, which would be based on their promotion and protection of local resources. Traditional products of animal origin are different and inseparable from the local identity, typical for nation and its food culture. Through confidence-building, and protection from oblivion, the value of domestic products, had preserved trough centuries-old tradition. Nowadays, each domestic product has its own recognisable taste, representing climate of the Republic of Serbia, from which it comes. Universally accepted model of rural institutional structure does not exist. Instead it accommodates and develops in accordance to needs, possibilities and area specific characteristics. By the efficient protection rural models becomes an investment incentives and contribute to general economic and industrial prosperity of the society.

Research governance and scientific knowledge production in The Gambia

Directory of Open Access Journals (Sweden)

Frederick U. Ozor

2014-09-01

Full Text Available Public research institutions and scientists are principal actors in the production and transfer of scientific knowledge, technologies and innovations for application in industry as well for social and economic development. Based on the relevance of science and technology actors, the aim of this study was to identify and explain factors in research governance that influence scientific knowledge production and to contribute to empirical discussions on the impact levels of different governance models and structures. These discussions appear limited and mixed in the literature, although still are ongoing. No previous study has examined the possible contribution of the scientific committee model of research governance to scientific performance at the individual level of the scientist. In this context, this study contributes to these discussions, firstly, by suggesting that scientific committee structures with significant research steering autonomy could contribute not only directly to scientific output but also indirectly through moderating effects on research practices. Secondly, it is argued that autonomous scientific committee structures tend to play a better steering role than do management-centric models and structures of research governance.

Assessment of the Impact of Teaching Demands on Research Productivity Among Doctoral Nursing Program Faculty.

Science.gov (United States)

Smeltzer, Suzanne C; Cantrell, Mary Ann; Sharts-Hopko, Nancy C; Heverly, Mary Ann; Jenkinson, Amanda; Nthenge, Serah

2016-01-01

This article reports the findings of a study that examined the research and scholarship productivity of doctorally prepared nursing faculty teaching and mentoring doctoral students and the conflicting demands on them to maintain programs of research and scholarship. The specific aims were to (a) examine the research productivity and scholarship of faculty members teaching in doctoral programs and mentoring doctoral students to examine the perceived effectiveness of existing institutional mechanisms to support scholarship, (b) explore institutional features and personal practices used by doctoral program faculty to develop and maintain research and scholarship productivity, and (c) analyze predictors of scholarship productivity. Data were collected via an on-line researcher-developed survey that examined doctoral faculty roles/responsibilities and their relationship to their scholarly productivity, overall research productivity, and institutional features and personal practices to support research/scholarship activities. Survey respondents reported spending a large amount of time engaged in research-related activities with 58.9% (n = 326) spending anywhere from 6 to 20 hours per week conducting research, writing research-based papers, giving presentations, grant writing, or conducting evidence-based improvement projects. Scholar productivity among the respondents was robust. Personal practices that most strongly supported faculty members' scholarship productivity were the belief that engaging in scholarship made them better teachers and the personal gratification in experiencing doctoral students' successes. A multiple regression analysis conducted to determine predictors of productivity indicated that the strongest predictor was the average number of hours spent on research/scholarship-related activities, followed by time bought out from teaching and other responsibilities of the faculty role for research. Copyright © 2016 Elsevier Inc. All rights reserved.

Books | Page 10 | IDRC - International Development Research Centre

International Development Research Centre (IDRC) Digital Library (Canada)

Book cover Natural Resource Management: The Impact of Gender and ... Productivity in Developing Countries: Economic Reforms in the Middle East ... Book cover Land Tenure, Gender, and Globalization: Research and Analysis from Africa,.

Publications | Page 2 | IDRC - International Development Research ...

International Development Research Centre (IDRC) Digital Library (Canada)

Results 11 - 20 of 7327 ... IDRC works with developing-country researchers and institutions to build local capacity through ... Fostering high growth enterprises is key to employment creation, productivity, and economic growth. ... Quality Assurance in Distance Education and eLearning: Challenges and Solutions from Asia.

Publications | Page 35 | IDRC - International Development Research ...

International Development Research Centre (IDRC) Digital Library (Canada)

Results 341 - 350 of 7330 ... IDRC works with developing-country researchers and ... Using product space methodology, this project aims to analyze the existing ... Plant innate immune response: qualitative and quantitative ... This article discusses the contribution of the Community Work Programme (CWP) to social cohesion, ...

Publications | Page 35 | IDRC - International Development Research ...

International Development Research Centre (IDRC) Digital Library (Canada)

Results 341 - 350 of 7331 ... IDRC works with developing-country researchers and institutions to ... Plant innate immune response: qualitative and quantitative ... This article discusses the contribution of the Community Work Programme (CWP) to social cohesion, ... Using product space methodology, this project aims to analyze ...

Leadership mentoring in nursing research, career development and scholarly productivity: A systematic review

NARCIS (Netherlands)

Thóra Hafsteinsdóttir; Angeli van der Zwaag; Prof. Dr. Marieke J. Schuurmans

2017-01-01

Although nursing has been an academic discipline for decades, the infrastructure for nursing research in many countries is still fragile and struggling. Postdoctoral nurses have difficulties developing sustaining careers in nursing research due to lack of career opportunities. Considerable research

Books | Page 10 | IDRC - International Development Research Centre

International Development Research Centre (IDRC) Digital Library (Canada)

Natural Resource Management: The Impact of Gender and Social Issues ... and Productivity in Developing Countries: Economic Reforms in the Middle East ... Book cover Land Tenure, Gender, and Globalization: Research and Analysis from ...

A Framework for successful new product development

Directory of Open Access Journals (Sweden)

Nadia Bhuiyan

2011-12-01

Full Text Available Purpose: The purpose of this paper is to propose a framework of critical success factors, metrics, and tools and techniques for implementing metrics for each stage of the new product development (NPD process.Design/methodology/approach: To achieve this objective, a literature review was undertaken to investigate decades of studies on NPD success and how it can be achieved. These studies were scanned for common factors for firms that enjoyed success of new products on the market.Findings: The paper summarizes NPD success factors, suggests metrics that should be used to measure these factors, and proposes tools and techniques to make use of these metrics. This was done for each stage of the NPD process, and brought together in a framework that the authors propose should be followed for complex NPD projects.Research limitations/implications: Several different research directions could provide additional useful information both to firms finding critical success factors (CSF and measuring product development success as well as to academics performing research in this area. The main research opportunity exists in implementing or testing the proposed framework.Practical implications: The framework can be followed by managers of complex NPD projects to ensure success.Originality/value: While many studies have been conducted on critical success factors for NPD, these studies tend to be fragmented and focus on one or a few phases of the NPD process. To the authors’ knowledge, this is the first time a framework that synthesizes these studies into a single framework.

Evaluation report on research and development of an ultra high performance laser applied composite production system. Achievement report; Chokoseino laser oyo fukugo seisan system no kenkyu kaihatsu ni kansuru hyoka hokokusho. Seika hokokuhen

Energy Technology Data Exchange (ETDEWEB)

NONE

1985-08-01

Research, development, and evaluation were made on a composite production system applicable to manufacture products of a large number of types in small quantities. In the research and development of a total system, verification works were carried out by studying basic designs, operation of the composite production system, and experiment plant operation. Research and development on cutting and processing technologies included studies on composite cutting mechanisms, general purpose fitting technologies, control systems, and drive systems. In the research and development of laser applied technologies, studies were performed on large output laser oscillators, the control thereof, and laser processing technologies. In the research and development of automatic diagnosis technologies, studies were executed on failure diagnosis, accuracy compensation, automatic inspection, and accuracy diagnostic technologies. In the research and development of design and control technologies, studies were carried out on automatic designing, process designing, and process controlling technologies. In the study of operation of the Tsukuba experiment plant, discussions were given on configuration of the experiment plant, laser processing mechanism, composite assembly mechanism, production inspection mechanism, and system operation. Furthermore, design studies were also carried out on practically usable systems. (NEDO)

[Contribution of microbiologists of Kirov City to development of penicillin and streptomycin production processes (70 years since development of technology for submerged production of first domestic antibiotics)].

Science.gov (United States)

Bakulin, M K; Tumanov, A S; Bakulin, V M; Kalininskiĭ, V B

2014-01-01

The publication is concerned with development of the technological processes for submered production of the first domestic antibiotics 70 years age. The literature data on the contribution of the microbiologists of the Kirov City and mainly the workers of the Red Army Research Institute of Epidemiology and Hygiene (nowadays Central Research Institute No. 48 of the Ministry of Defense of the Russian Federation, Kirov), to development of the manufacture processes for production of penicillin and streptomycin are reviewed.

Factors affecting research productivity of production and operations management groups: An empirical study

Directory of Open Access Journals (Sweden)

2006-01-01

Full Text Available This paper identifies factors that promote research productivity of production and operations management (POM groups of researchers in US business schools. In this study, research productivity of a POM group is defined as the number of articles published per POM professor in a specific period of time. The paper also examines factors that affect research quality, as measured by the number of articles published per POM professor in journals, which have been recognized in the POM literature as an elite set. The results show that three factors increase both the research productivity and the quality of the articles published by professors of a POM group. These factors are (a the presence of a POM research center, (b funding received from external sources for research purposes, and (c better library facilities. Doctoral students do assist in improving research quality and productivity, but they are not the driving force. These results have important implications for establishing policy guidelines for business schools. For example, real-world problems are funded by external sources and have a higher probability of publication. Furthermore, schools could place more emphasis on external funding, as most engineering schools do, since groups receiving external funding are more productive in terms of research.

INFLUENCES ON ORGANISATIONAL SLACK IN NEW PRODUCT DEVELOPMENT PROJECTS

OpenAIRE

ANDERS RICHTNÉR; PÄR ÅHLSTRÖM

2006-01-01

Programs to decrease cost and to increase operational efficiency may reduce a company's ability to innovate, by reducing organisational slack. Previous research on the relationship between organisational slack and innovation has been at level of the firm and has neglected the processes underlying the relationship, which takes place at the level of product development projects. In this paper, we identify organisational slack and its influences at the level of the product development project. T...

Distributed team innovation - a framework for distributed product development

OpenAIRE

Larsson, Andreas; Törlind, Peter; Karlsson, Lennart; Mabogunje, Ade; Leifer, Larry; Larsson, Tobias; Elfström, Bengt-Olof

2003-01-01

In response to the need for increased effectivity in global product development, the Polhem Laboratory at Luleå University of Technology, Sweden, and the Center for Design Research at Stanford University, USA, have created the concept of Distributed Team Innovation (DTI). The overall aim of the DTI framework is to decrease the negative impact of geographic distance on product development efforts and to further enhance current advantages of worldwide, multidisciplinary collaboration. The DTI ...

Workshop on New Visions for Software Design and Productivity: Research and Applications

Data.gov (United States)

Networking and Information Technology Research and Development, Executive Office of the President — The goals of the SDP workshop on New Visions for Software Design and Productivity were to: Bring together leading-edge researchers and practitioners Encourage...

Development of the production of special steels for nuclear industries

International Nuclear Information System (INIS)

Vieillard-Baron, B.

1977-01-01

The development of electro-nuclear industries has a powerful impact on the production of special steels, although the quantity of material applied to the non-conventional parts of nuclear power plants is quite small as compared to the total production requirements in this industrial field. Evolution bears on the product research, development and testing methods, on the technical and marketing services - in particular the establishment of quality control teams and assurance manuals - and the implementation of high performance production equipments. Manufacturing must however take place under normal work load and productivity conditions of production tools, and thus ensure a satisfactory profitability on investments entailed [fr

Otolaryngology Residency Program Research Resources and Scholarly Productivity.

Science.gov (United States)

Villwock, Jennifer A; Hamill, Chelsea S; Nicholas, Brian D; Ryan, Jesse T

2017-06-01

Objective To delineate research resources available to otolaryngology residents and their impact on scholarly productivity. Study Design Survey of current otolaryngology program directors. Setting Otolaryngology residency programs. Subjects and Methods An anonymous web-based survey was sent to 98 allopathic otolaryngology training program directors. Fisher exact tests and nonparametric correlations were used to determine statistically significant differences among various strata of programs. Results Thirty-nine percent (n = 38) of queried programs responded. Fourteen (37%) programs had 11 to 15 full-time, academic faculty associated with the residency program. Twenty (53%) programs have a dedicated research coordinator. Basic science lab space and financial resources for statistical work were present at 22 programs (58%). Funding is uniformly provided for presentation of research at conferences; a minority of programs (13%) only funded podium presentations. Twenty-four (63%) have resident research requirements beyond the Accreditation Council for Graduate Medical Education (ACGME) mandate of preparing a "manuscript suitable for publication" prior to graduation. Twenty-five (67%) programs have residents with 2 to 3 active research projects at any given time. None of the investigated resources were significantly associated with increased scholarly output. There was no uniformity to research curricula. Conclusions Otolaryngology residency programs value research, evidenced by financial support provided and requirements beyond the ACGME minimum. Additional resources were not statistically related to an increase in resident research productivity, although they may contribute positively to the overall research experience during training. Potential future areas to examine include research curricula best practices, how to develop meaningful mentorship and resource allocation that inspires continued research interest, and intellectual stimulation.

Global product development

DEFF Research Database (Denmark)

Taylor, Thomas Paul; Ahmed-Kristensen, Saeema

2016-01-01

Selecting key performance indicators in conventional product development is a challenging task for project management and is compound by global product development. Informed from the findings of two in depth case studies conducted with large Danish manufacturing companies, in this paper we develo...

Accelerated product development

NARCIS (Netherlands)

Langerak, F.; Seth, J.N.; Malhotra, N.K.

2011-01-01

Accelerated product development is a competitive strategy that seeks to reduce the development cycle time of new products. However, there has been little theoretical advancement and empirical model testing in the identification of the conditions under which cycle time reduction is appropriate, the

Developing of milled peat production control in Turveruukki Oy

Energy Technology Data Exchange (ETDEWEB)

Ljokkoi, R

1985-01-01

Control research on the production of milled peat has as its primary aim the ability to control the peat drying process under different weather and field conditions. Actual development work connected with production control was begun in 1982 with the clear aim of developing and applying in practice a monitoring adn control system complete with measuring equipment which would permit the drying process to be measured indirectly and weather forecasts to be used systematically in the planning of production at each individual peat site. During the 1984 production season development work reached the stage of experimental use. Experiences gained from trial use have been mainly positive and trial use of the manual system can be considered the first step in the application o the system. As regards the measuring technique, it is justified to say that an adequate technical level has already been attained and the correlation of the indirect measuring method with peat drying can be further improved by adjusting the location height of the evaporation meter. On the other hand, calculation of the length of the harvesting cycle requires further research, which from the point of view of practice must be orientated towards control of field conditions and changes in them during the production season. Although the application of the production control system is informative in nature, it is clearly of assistance when deciding how to carry out production. By means of this system iy id possible to achieve financial benefit in the form of lowered production costs and a larger harvest per hectare.

Typology of Uncertainties in the Development Process of Product-Service Systems

DEFF Research Database (Denmark)

Ramirez Hernandez, Tabea; Kreye, Melanie; Pigosso, Daniela Cristina Antelmi

This paper investigates uncertainty in the development of Product-Service Systems (PSS) – a complex combination of product and services. This research is important because practitioners struggle with managing the high uncertainties arising from the complexity of parallel product and service...... development in compound clusters of stakeholders. Yet, scholars have not analyzed these challenges extensively. Based on a combination of innovation management and servitization literature a conceptual framework is offered, detailing five uncertainty types relevant for PSS-development: environmental...

Supporting the development process for building products by the use of research portfolio analysis: A case study for wood plastics composite materials

OpenAIRE

Friedrich, Daniel; Luible, Andreas

2016-01-01

Today’s plastics are increasingly compounded using renewable fibres. Such composites raised the interest of the massively bulk-plastics consuming building industry. However, “green” products are still rare and their development constitutes a challenge particularly for small companies. Our study evaluated European scientific projects in composites from which we derived a Research Portfolio serving as future matrix for ideation. It was found that research databanks can serve as basis for str...

Development of an integrated research and development program on eastern Canadian coals

Energy Technology Data Exchange (ETDEWEB)

Abbott, D

1981-01-01

Coal production and use, R and D performers on eastern Canadian coals, coordination of an R and D program, technical problems of the coal industry and R and D requirements, and recommendations for a research and development program are described. (27 refs.)

Bioenergy research programme. Yearbook 1996. Production of wood fuels; Bioenergian tutkimusohjelma. Vuosikirja 1996. Puupolttoaineiden tuotantotekniikka

Energy Technology Data Exchange (ETDEWEB)

Nikku, P [ed.

1997-12-01

The aim of the programme is to increase the use of economically profitable and environmentally sound bioenergy by improving the competitiveness of present peat and wood fuels. Research and development projects will also develop new economically competitive biofuels, new equipment and methods for production, handling and utilisation of biofuels. The total funding for 1996 was 27.3 million FIM and the number of projects 63. The number of projects concerning wood fuels production was 36. The main goals of the research are to develop new production methods for wood fuels in order to decrease the production costs to the level of imported fuels (100 km distance). The second goal is to decrease the small scale production costs by 20 % as compared with the 1992 technology level. Also, new harvesting technology and new work methods will be developed for forest owners and small-entrepreneurs in the course of the programme. Results of the projects carried out in 1996 in this programme are presented in this publication. The integrated harvesting methods, which supply both raw material to wood products industry and wood fuel for energy production, have been chosen the main research areas because they seem to be most promising. Most of the projects are focused in the wood fuel production from first thinnings and from final fellings. The projects broadly covered the research area focusing from material flows, productivity studies, basic wood properties to several case studies. The follow up project of Evaluation-drum chipper was completed with good fuel quality and productivity results. Also the large Forest Energy Project of Central Finland was completed. The project was a significant technology transfer and information dissemination project. (orig.)

21st century natural product research and drug development and traditional medicines.

Science.gov (United States)

Ngo, Linh T; Okogun, Joseph I; Folk, William R

2013-04-01

Natural products and related structures are essential sources of new pharmaceuticals, because of the immense variety of functionally relevant secondary metabolites of microbial and plant species. Furthermore, the development of powerful analytical tools based upon genomics, proteomics, metabolomics, bioinformatics and other 21st century technologies are greatly expediting identification and characterization of these natural products. Here we discuss the synergistic and reciprocal benefits of linking these 'omics technologies with robust ethnobotanical and ethnomedical studies of traditional medicines, to provide critically needed improved medicines and treatments that are inexpensive, accessible, safe and reliable. However, careless application of modern technologies can challenge traditional knowledge and biodiversity that are the foundation of traditional medicines. To address such challenges while fulfilling the need for improved (and new) medicines, we encourage the development of Regional Centres of 'omics Technologies functionally linked with Regional Centres of Genetic Resources, especially in regions of the world where use of traditional medicines is prevalent and essential for health.

Micro Products - Product Development and Design

DEFF Research Database (Denmark)

Hansen, Hans Nørgaard

2003-01-01

Innovation within the field of micro and nano technology is to a great extent characterized by cross-disciplinary skills. The traditional disciplines like e.g. physics, biology, medicine and engineering are united in a common development process that can only take place in the presence of multi......-disciplinary competences. One example is sensors for chemical analysis of fluids, where chemistry, biology and flow mechanics all influence the design of the product and thereby the industrial fabrication of the product [1]. On the technological side the development has moved very fast, primarily driven by the need...... of the electronics industry to create still smaller chips with still larger capacity. Therefore the manufacturing technologies connected with micro/nano products in silicon are relatively highly developed compared to the technologies used for manufacturing micro products in metals, polymers and ceramics. For all...

INDUSTRIAL TECHNOLOGICAL RESEARCH «DEVELOPMENT OF RUSSIAN MARKET OF NANOTECHNOLOGICAL PRODUCTS IN CONSTRUCTION UNTIL 2020». PART 2. ANALYSIS OF THE WORLD MARKET

Directory of Open Access Journals (Sweden)

GUSEV Boris Vladimirovich

2013-04-01

Full Text Available Some results of the industrial research «Development of Russian market of nanotechnological products in construction until 2020» have been published. Authors invite all interested specialists and specialized organization to take part in the broad public discussion.

Development of radioisotope production in the Philippines

Energy Technology Data Exchange (ETDEWEB)

Cabalfin, E G [Philippine Nuclear Research Institute, Quezon (Philippines)

1998-10-01

The Philippine Nuclear Research Institute (PNRI) started its activities on radioisotope production more than three decades ago, when the Philippine Research Reactor (PRR-1) started operating at its full rated power of 1 MW. Since then, several radionuclides in different chemical forms, were routinely produced and supplied for use in nuclear medicine, industry, agriculture, research and training, until the conversion of the PRR-1 to a 3 MW TRIGA type reactor. After the criticality test of the upgraded reactor, a leak was discovered in the pool liner. With the repair of the reactor still ongoing, routine radioisotope production activities have been reduced to dispensing of imported bulk {sup 131}I. In the Philippines, radioisotopes are widely used in nuclear medicine, with {sup 131}I and {sup 99m}Tc as the major radionuclides of interest. Thus the present radioisotope production program of PNRI is directed to meet this demand. With the technical assistance of the International Atomic Energy Agency (IAEA), PNRI is setting up a new {sup 131}I production facility. The in-cell equipment have been installed and tested using both inactive and active target, obtained from BATAN, Indonesia. In order to meet the need of producing {sup 99}Mo-{sup 99m}Tc generators, based on low specific activity reactor-produced {sup 99}Mo, research and development work on the preparation of {sup 99m}Tc gel generators is ongoing. (author)

Research reactor production of radioisotopes for medical use

International Nuclear Information System (INIS)

Mani, R.S.

1985-01-01

More than 70% of all radioisotopes applied in medical diagnosis and research are currently produced in research reactors. Research reactors are also an important source of certain radioisotopes, such as 60 Co, 90 Y, 137 Cs and 198 Au, which are employed in teletherapy and brachytherapy. For regular medical applications, mainly 29 radionuclides produced in research reactors are used. These are now produced on an 'industrial scale' by many leading commercial manufacturers in industrialized countries as well as by national atomic energy establishments in developing countries. Five main neutron-induced reactions have been employed for the regular production of these radionuclides, namely: (n,γ), (n,p), (n,α), (n,γ) followed by decay, and (n, fission). In addition, the Szilard-Chalmers process has been used in low- and medium-flux research reactors to enrich the specific activity of a few radionuclides (mainly 51 Cr) produced by the (n,γ) reaction. Extensive work done over the last three decades has resulted in the development of reliable and economic large-scale production methods for most of these radioisotopes and in the establishment of rigorous specifications and purity criteria for their manifold applications in medicine. A useful spectrum of other radionuclides with suitable half-lives and low to medium toxicity can be produced in research reactors, with the requisite purity and specific activity and at a reasonable cost, to be used as tracers. Thanks to the systematic work done in recent years by many radiopharmaceutical scientists, the radionuclides of several elements, such as arsenic, selenium, rhenium, ruthenium, palladium, cadmium, tellurium, antimony, platinum, lead and the rare earth elements, which until recently were considered 'exotic' in the biomedical field, are now gaining attention. (author)

New Product Development, R&D, and Culture

DEFF Research Database (Denmark)

Brem, Alexander; Kürzdörfer, Tamara

2016-01-01

Recent developments in the global economy indicate that new product development (NPD) activities are not limited to any single country; rather, they have spread across nations and cultures. This study aims to increase the understanding of NPD through an intercultural analysis by comparing...... innovation processes in Germany and China. Our study relates NPD and Hofstede's cultural dimensions by identifying culture-based patterns of similarities and differences between German and Chinese practices related to strategic, organisational, and operational factors. The research subjects are five...... international companies with research and development sites of the same business section in Germany and China. The findings reveal both culture-dependent and culture-independent factors. Most of the strategic and organisational factors in the two countries are relatively similar because of site...

EXPERIMENTAL RESEARCH REGARDING LEATHER APPLICATIONS IN PRODUCT DESIGN

Directory of Open Access Journals (Sweden)

PRALEA Jeni

2015-05-01

Full Text Available This paper presents the role and importance of experimental research in design activity. The designer, as a researcher and a project manager, proposes to establish a relationship between functional-aesthetic-constructive-technological-economic,based on the aesthetic possibilities of the materials used for the experiments. With the aim to identify areas for the application of leather waste resulted from the production process, the paper presents experiments conducted with this material in combination with wood, by using different techniques that lead to different aesthetic effects. Identifying the areas to use and creating products from leather and/or wood waste, is based on the properties of these materials. Leather, the subject of these experiments, has the advantage that it can be used on both sides. Tactile differences of the two sides of this material has both aesthetical and functional advantages, which makes it suitable for applications on products that meet the requirements of "design for all". With differentiated tactile characteristics, in combination with other materials, for these experiments wood, easily "read touch" products can be generated to help people with certain disabilities. Thus, experiments presented in this paper allows the establishment of aesthetic schemes applicable to products that are friendly both with the environment (based on the reuse of wood and leather waste and with the users (can be used as applications, accessories and concepts of products for people with certain disabilities. The designer’s choices or decisions can be based on the results of this experiment. The experiment enables the designer to develop creative, innovative and environmentally friendly products.

Indicators for establishing SME product development networks

NARCIS (Netherlands)

Post, G.J.J.; Hop, L.; Aken, van J.E.

2001-01-01

The results of research into SME product development networks are presented. The paper provides insight to the process of establishing such networks and the use of indicators in the design and monitoring of this process. It is based on five extensive case studies and in addition on several in-depth

Development of hydrogen production technology using FBR

International Nuclear Information System (INIS)

Ono, Kiyoshi; Otaki, Akira; Chikazawa, Yoshitaka; Nakagiri, Toshio; Sato, Hiroyuki; Sekine, Takashi; Ooka, Makoto

2004-06-01

This report describes the features of technology, the schedule and the organization for the research and development regarding the hydrogen production technology using FBR thermal energy. Now, the hydrogen production system is proposed as one of new business models for FBR deployment. This system is the production of hydrogen either thermal energy at approximately from 500degC to 550degC or electricity produced by a sodium cooled FBR. Hydrogen is expected to be one of the future clean secondary energies without carbon-dioxide emission. Meanwhile the global energy demand will increase, especially in Asian countries, and the energy supply by fossil fuels is not the best choice considering the green house effect and the stability of energy supply. The development of the hydrogen technology using FBR that satisfies 'sustainable energy development' and 'utilization of energies free from environmental pollution' will be one of the promising options. Based on the above mentioned recognition, we propose the direction of the development, the issues to be solved, the time schedule, the budget, and the organization for R and D of three hydrogen production technologies, the thermochemical hybrid process, the low temperature steam reforming process, and the high temperature steam electrolysis process in JNC. (author)

Current state and future directions of research and development in conducting polymers

International Nuclear Information System (INIS)

Spinks, G.M.; Innis, P.C.; Lewis, T.W.; Kane-Maghire, L.A.P.; Wallace, G.G.

2000-01-01

Polymers that inherently conduct electricity have been researched intensively for a little over 20 years. An enormous research effort in academic and industrial institutions has resulted in over 17,000 publications published in the last 10 years alone. Significant advances in the synthesis of new polymers and the methods for processing these polymers into products have resulted from this research activity. A number of commercial developments have emerged, some of which have reached maturity as marketed products. Some others have failed in the marketplace. The diversity of applications for conducting polymers continues to fuel research and development and ensures that new products will emerge over the foreseeable future. In the more distant future, truly intelligent polymer systems remain as an achievable objective. By developing appropriate processing and fabrication technologies, it should be possible to integrate sensing, actuating and energy storage functions into a single system. Further developments in self-assembly of conducting polymers from the nano- to the meso-scale will open up applications in MEMS and nanotechnology

The sustainable development thematic in the research groups

Directory of Open Access Journals (Sweden)

Maria Cristina Comunian Ferraz

2007-11-01

Full Text Available The technological innovation brought for the debate the question of the sustainable technological development. The article presents an entirety of theoretical reflections on the science, technology and sustainable development themes and to aim the contributions of the Information Science, while interdisciplinary science, with respect to the understanding of the sustainable development. With basis in this reference it was carried through the investigation of descriptive exploratory nature with quanti-qualitative boarding, having as main objective to identify the presence of the sustainable development thematic in research groups of the UFSCar registered in cadastre in the National Directory of Research Groups of the CNPq. The results had shown that the sustainable development thematic is present in eleven researchgroups of the UFSCar distributed in different knowledge areas. Comparing the data gotten with the research groups of the country that had participated of 2004 Census of the National Directory of Research Groups of the CNPq it was verified that it has similarity between both the data. In accordance with scientific literature, confirms that the sustainable development thematic is interdisciplinar and that the knowledge production of the research groups is result to know articulated in some of the knowledge areas.

ARM Climate Research Facility Quarterly Value-Added Product Report

Energy Technology Data Exchange (ETDEWEB)

Sivaraman, C. [DOE ARM Climate Research Facility, Washington, DC (United States)

2016-10-01

The purpose of this report is to provide a concise status update for Value-Added Products (VAPs) implemented by the Atmospheric Radiation Measurement (ARM) Climate Research Facility. The report is divided into the following sections: (1) new VAPs for which development has begun; (2) progress on existing VAPs; (3) future VAPs that have been recently approved; (4) other work that leads to a VAP; (5) top requested VAPs from the ARM Data Archive; and (6) a summary of VAP and data releases to production and evaluation. New information is highlighted in blue text. New information about processed data by the developer is highlighted in red text. The upcoming milestones and dates are highlighted in green.

South Africa's nuclear hydrogen production development programme

International Nuclear Information System (INIS)

Van Ravenswaay, J.P.; Van Niekerk, F.; Kriek, R.J.; Blom, E.; Krieg, H.M.; Van Niekerk, W.M.K.; Van der Merwe, F.; Vosloo, H.C.M.

2010-01-01

In May 2007 the South African Cabinet approved a National Hydrogen and Fuel Cell Technologies R and D and Innovation Strategy. The strategy will focus on research, development and innovation for: i) wealth creation through high value-added manufacturing and developing platinum group metals catalysis; ii) building on the existing knowledge in high temperature gas-cooled reactors (HTGR) and coal gasification Fischer-Tropsch technology, to develop local cost-competitive hydrogen production solutions; iii) to promote equity and inclusion in the economic benefits from South Africa's natural resource base. As part of the roll-out strategy, the South African Department of Science and Technology (DST) created three Competence Centres (CC), including a Hydrogen Infrastructure Competence Centre hosted by the North-West University (NWU) and the Council for Scientific and Industrial Research (CSIR). The Hydrogen Infrastructure CC is tasked with developing hydrogen production, storage, distribution as well as codes and standards programmes within the framework of the DST strategic objectives to ensure strategic national innovation over the next fifteen years. One of the focus areas of the Hydrogen Infrastructure CC will be on large scale CO 2 free hydrogen production through thermochemical water-splitting using nuclear heat from a suitable heat source such as a HTGR and the subsequent use of the hydrogen in applications such as the coal-to-liquid process and the steel industry. This paper will report on the status of the programme for thermochemical water-splitting as well as the associated projects for component and technology development envisaged in the Hydrogen Infrastructure CC. The paper will further elaborate on current and future collaboration opportunities as well as expected outputs and deliverables. (authors)

Factors affecting research productivity of production and operations management groups: An empirical study

OpenAIRE

George C. Hadjinicola; Andreas C. Soteriou

2006-01-01

This paper identifies factors that promote research productivity of production and operations management (POM) groups of researchers in US business schools. In this study, research productivity of a POM group is defined as the number of articles published per POM professor in a specific period of time. The paper also examines factors that affect research quality, as measured by the number of articles published per POM professor in journals, which have been recognized in the POM literature as ...

Development of synthetic gasoline production process

Energy Technology Data Exchange (ETDEWEB)

Imai, T; Fujita, H; Yamada, K; Suzuki, T; Tsuchida, Y

1986-01-01

As oil deposits are limited, it is very important to develop techniques for manufacturing petroleum alternatives as substitute energy sources to brighten the outlook for the future. The Research Association for Petroleum Alternatives Development (RAPAD) in Japan is engaged in the research and development of production techniques for light hydrocarbon oils such as gasoline, kerosene, and light oil from synthesis gas (CO, H/sub 2/) obtained from the raw materials of natural gas, coal, etc. Regarding the MTG process of synthesizing gasoline via methanol from synthesis gas and the STG process of directly synthesizing gasoline from synthesis gas, Cosmo Oil Co., Ltd. and Mitsubishi Heavy Industries, Ltd., members of RAPAD, have sought jointly to develop catalysts and processes. As a result of this co-operation, the authors have recently succeeded in developing a new catalyst with a long life span capable of providing a high yield and high selectivity. Additionally, the authors are currently on the verge of putting into effect a unique two-step STG process of synthesizing high octane gasoline via dimethyl ether, referred to as the AMSTG process.

DESIGN VERSUS PRODUCT DEVELOPMENT?

Directory of Open Access Journals (Sweden)

Edu Grieco Mazzini Junior

2015-03-01

Full Text Available Design or product development? The questioning in relation to the employment of such terminology dates back to possible misconceptions regarding interpretation and approach them. Therefore, it can be stated that there are differences between these two terms? In this context, we highlight two views concerning the origin of the design. The first character creative and based on pre-industrial revolution, based on projective and methodologies directed towards the practice of designing products. And second, where design is understood as an industrial process: the development of new products includes, besides a creative procedure are developed, and symbolic formal solutions for products, but also a technical procedure based on the definition of the requirements concerning the product engineering. Is this the most widely accepted interpretation? theoretical studies were conducted from interpretations of the concept of the design proposed by the International Council of Societies of Industrial Design – ICSDI (2012, and for the characterization of the process of product development, we sought to develop an analogy between these two terminologies and can be proved that the use of one of terminology will not cause deviations of interpretation, since both deal with the life cycle of the product. The main results obtained until now the definition of design proposed by the ICSID where it is characterized as a creative activity focused on the complete life cycle of products is the more approaches of the concept of product development.

New Product Development (Npd) Process In Subsidiary: Information Perspectives

OpenAIRE

Firmanzah

2008-01-01

Information is an important resource for new product development (NPD) process in subsidiary. However, we still lack of research to analyze NPD process from information perspective in subsidiary context. This research is an exploratory research and it exploited 8 cases of NPD process in consumer goods subsidiaries operating in Indonesian market. Three types of information have been identified and analyzed NPD process; global, regional and local information. The result of this research ...

Publications | Page 35 | IDRC - International Development Research ...

International Development Research Centre (IDRC) Digital Library (Canada)

Results 341 - 350 of 6381 ... IDRC works with developing-country researchers and institutions to build local capacity through funding, knowledge sharing, and training. ... The ''Quality Penalty'' refers to the provision of a facility, product, or service of low quality, which is still offered at a price similar to that of higher-quality. The.

Forest products research and development organizations in a worldwide setting : a review of structure, governance, and measures of performance

Science.gov (United States)

Paul V. Ellefson; Michael A. Kilgore; Kenneth E. Skog; Christopher D. Risbrudt

2006-01-01

The ability of forest products research programs to contribute to a nation’s well-being requires that research organizations be well organized, effectively managed, and held to high standards of performance. In 2004-2005, a review of forest products and related research organizations beyond the boundaries of the United States was carried out. The intent was to obtain a...

Animal Production Research Advances: Editorial Policies

African Journals Online (AJOL)

Focus and Scope. Animal production research advances is a peer-review journal established expressly to promote the production of all animal species utilized as food. The journal has an international scope and is intended for professionals in animal production and related sciences. We solicit contributions from animal ...

Opportunity parameters in the development of Product/Service-Systems

DEFF Research Database (Denmark)

Matzen, Detlef; Andreasen, Mogens Myrup

2006-01-01

In the light of the current focus on innovative business development throughout industry and society, the concept of product/service-systems (PSS) is a promising approach to product development, which may yield product offers that benefit the company, customer and society alike. Only recently...... while maintaining a high level of need satisfaction [Mont 2004]. The enhancement of goods with the provision of services has been practised in some industrial sectors for decades, mainly based on maintenance deliveries to capital investments in B2B settings. Researchers working with these business....../service-oriented strategy we believe companies can deliver superior value solutions and ensure more optimal utilisation of resources by aligning operations with their customers compared to traditional product-oriented offers. The corresponding integration is not reflected in existing models and processes of product...

Product Portfolio Management Best Practices For New Product Development: A Review Of Models

Directory of Open Access Journals (Sweden)

Doorasamy Mishelle

2017-02-01

Full Text Available The survival of any industrial organization depends on whether producing goods or services hinge on how innovative they have become in managing their product portfolio to craft new products that changes with the ever-changing tastes and needs of their customers. This study delves in to the models and theories that drive product portfolio management practices in a way that they support the successes of new product development. Our review is based on selected studies at the frontier of product management, summarized, and compared based on authors experiences, subsisting models, and theories with the results purely based on qualitative rather than quantitative approaches. The essence is to explore possible new theory or model in this field of research.

The role of new product development on export market share

Directory of Open Access Journals (Sweden)

Naser Azad

2013-10-01

Full Text Available There is an ongoing change on customers’ needs on selecting customers’ needs, which may influence requirements on designing products and services as well as export sale and company’s market shares in domestic and international market. In the present study, through descriptive approach with qualitative method and case study, we investigate important key factors influencing on new product development and products’ successive factors at overseas nutritional market. In addition by presenting a new model in accordance with the present condition of the organization we explore the closest product development model and affective factors influencing them. The study investigates 36 factors and extracts six important ones, which influence product development including intelligent information, process research and development, strategy introduced, participation strategy, market survey and differentiation strategy.

Development of Commercial-scale Fission Mo-99 Production System

Energy Technology Data Exchange (ETDEWEB)

Lee, Seung-Kon; Lee, Suseung; Hong, Soon-Bog; Jang, Kyung-Duk; Park, Ul Jael; Lee, Jun Sig [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

These days, worldwide {sup 99} Mo supply is not only insufficient but also unstable. Because, most of the main {sup 99}Mo production reactors are more than years old and suffered from frequent and unscheduled shutdown. Therefore, movement to replace old reactors to keep stable supply is now active. Under these conditions, KAERI (Korea Atomic Energy Research Institute) is developing LEU-based fission {sup 99}Mo production process which is connected to the new research reactor (Kijang New Research Reactor, KJRR), which is being constructed in Gijang, Busan, Korea. Historically, the most fission {sup 99}Mo producers have been used highly enriched uranium (HEU) targets so far. However, to reduce the use of HEU in private sector for non-proliferation, {sup 99}Mo producers are forced to convert their HEU-based process to use low enriched uranium (LEU) targets. Economic impact of a target conversion from HEU to LEU is significant. In this study, fission {sup 99}Mo process with non-irradiated LEU targets was presented except separation and purification steps. Pre- and post-irradiation tests of the fission {sup 99}Mo target will be done in 4th quarter of 2016. For the fission Mo production process development, hot experiments with irradiated LEU targets will be done in 4th quarter of 2016. Then, verification of the production process with quality control will be followed until the commercial production of fission {sup 99}Mo scheduled in 2019.

Leadership mentoring in nursing research, career development and scholarly productivity : A systematic review

NARCIS (Netherlands)

Hafsteinsdóttir, Thóra B.; van der Zwaag, Angeli M.; Schuurmans, Marieke J.

2017-01-01

Background Although nursing has been an academic discipline for decades, the infrastructure for nursing research in many countries is still fragile and struggling. Postdoctoral nurses have difficulties developing sustaining careers in nursing research due to lack of career opportunities.

A Framework For Product Development

DEFF Research Database (Denmark)

McAloone, Timothy Charles; Robotham, Antony John

1999-01-01

-aspect approach to product development; understanding the strategic conditions that affect product development; developing a coherent approach to product quality based on product-life thinking; addressing environmental needs in a proactive manner through innovation techniques; and understanding both...

Present status of research on radiation utilization in 1994 at JAERI. Utilization of irradiation and RI production and utilization

International Nuclear Information System (INIS)

1994-10-01

In Japan Atomic Energy Research Institute, Takasaki Radiation Chemistry Research Establishment is in charge of the utilization of irradiation, and Tokai Research Establishment is in charge of the production and utilization of radioisotopes. As for the utilization of irradiation the development of new polymers, the development of environment preservation technology such as flue gas treatment, and by using various ion beams from four accelerators, the development of the materials used for space environment, nuclear fusion and new functional materials, the research on the radiation application to biotechnology, the development of the production and utilization of new radioisotopes have been carried out. As for the production and utilization of radioisotopes, the development of new products and new utilization techniques, the technology of producing and using a large amount of tritium, and the research on the chemical behavior of tritium have been carried out. The international cooperations have been promoted positively. In this report, the research activities in 1994 are described. (K.I.)

Women Academics and Research Productivity: An International Comparison

Science.gov (United States)

Aiston, Sarah Jane; Jung, Jisun

2015-01-01

In the prestige economy of higher education, research productivity is highly prized. Previous research indicates, however, a gender gap with respect to research output. This gap is often explained by reference to familial status and responsibilities. In this article, we examine the research productivity gender gap from an international perspective…

78 FR 8500 - Biomass Research and Development Technical Advisory Committee

Science.gov (United States)

2013-02-06

... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Biomass Research and... Biomass Research and Development Technical Advisory Committee. The Federal Advisory Committee Act (Pub. L... fuels and biobased products. Tentative Agenda: Agenda will include the following: Update on USDA Biomass...

Platform-based production development

DEFF Research Database (Denmark)

Bossen, Jacob; Brunoe, Thomas Ditlev; Nielsen, Kjeld

2015-01-01

Platforms as a means for applying modular thinking in product development is relatively well studied, but platforms in the production system has until now not been given much attention. With the emerging concept of platform-based co-development the importance of production platforms is though...

Research to support development of organic food and farming

OpenAIRE

Watson, Christine; Alrøe, Hugo; Kristensen, Erik Steen

2006-01-01

Agriculture and organic agriculture in particular are developing rapidly, due not only to technological change but also to changes in agricultural policy and public expectation. Research allows new knowledge to be developed and is thus vital for the future of organic agriculture. We can ask the question, what is the purpose of research on organic farming? Is it to increase yield and productivity, to compare it with other forms of agriculture, or to quantify its environmental and social impact...

Enhancement of research reactor utilization in the developing countries

International Nuclear Information System (INIS)

Bashir, J.; Butt, N.M.

1994-06-01

As the research reactor represents a significant capital investment on the part of any institution and in addition there are recurring annual operating costs, therefore, the subject of its effective utilization has always been of interest. World wide there are about three hundred research reactors. Of these, 92 are located in the developing countries. Together, these reactors represent quite significant research potential. In the present paper, reasons of under utilization, procedures necessary to measure the productivity, ways and means of enhancing the utilization of research reactors are described. In the end, use of two research reactors at PINSTECH are described to illustrate some of the ways in which a successful utilization of a research reactor can made in the developing country. (author) 9 figs

The Perceived Impact of the Agile Development and Project Management Method Scrum on Information Systems and Software Development Productivity

DEFF Research Database (Denmark)

Kautz, Karlheinz; Johansen, Thomas Heide; Uldahl, Andreas

2013-01-01

This research contributes to the body of knowledge in information systems development (ISD) with an empirical investigation in form of a case study that demonstrates the positive impact of the agile development and project management method Scrum on information systems and software development...... productivity and it provides a useful operationalization of the concept through seven identified indicators for productivity. Despite the fact that the case unit had challenges with the use of Scrum, the indicators identified the areas where the company had managed to exploit the potential of Scrum and its...... practices with regard to increasing productivity. The research results are discussed both with regard to the existing Scrum literature as well as to complex adaptive systems (CAS) as a foundation for ISD and agile development....

THE INFLUENCE OF A MATHEMATICAL MODEL IN PRODUCTION STRATEGY: CONCEPTUAL DEVELOPMENT AND EMPIRICAL TEST

Directory of Open Access Journals (Sweden)

Paulo Cesar Chagas Rodrigues

2012-07-01

Full Text Available Acquire and produce what is strictly necessary are the goals of the organizations, since they aim companies more competitive and thereby reducing production costs. The research method is applied in nature, with a qualitative and quantitative approach, in which the objective of the research will be: exploratory and descriptive, with technical procedures, divided into: bibliographic, documentary, survey and concluding with a case study. On this assumption the main objective of this research is to develop and analyze a mathematical model that minimizes costs and maximizes the postponement of stocks in a company in the pulp, paper and paper products. Having been found only four papers, two articles and two theses that deal with the issue of demand management, supply chain and inventory postponement. These studies address the issue by modeling the productive time of the supply chain. For production segments this research may enable development of management practices demand and production strategy, allowing cost reductions and productivity gains possible. With the development of the mathematical model could ever analyze the behavior of demand and its influence on the productive strategy, strategy formulation regarding the purchase of raw materials and finished product storage in the last four years the company's results for the proposed model.

Excellent fruits of national research and development

International Nuclear Information System (INIS)

2008-12-01

This book introduces 100 excellent fruits of research and development in Korea. Such as. It show the titles of 100 excellent fruits about technology of hope to give people healthy life, technology of product and abundance to enrich resource, technology to make green growth and sound society, next service technology to communicate with network, new electron technology to brings life change, technology to draw innovation of industrial fields, technology to build higher value-added product with new fusion materials and technology to share and to create future knowledge.

Developing symbiotic consortia for lignocellulosic biofuel production

Energy Technology Data Exchange (ETDEWEB)

Zuroff, Trevor R.; Curtis, Wayne R. [Pennsylvania State Univ., University Park, PA (United States). Dept. of Chemical Engineering

2012-02-15

The search for petroleum alternatives has motivated intense research into biological breakdown of lignocellulose to produce liquid fuels such as ethanol. Degradation of lignocellulose for biofuel production is a difficult process which is limited by, among other factors, the recalcitrance of lignocellulose and biological toxicity of the products. Consolidated bioprocessing has been suggested as an efficient and economical method of producing low value products from lignocellulose; however, it is not clear whether this would be accomplished more efficiently with a single organism or community of organisms. This review highlights examples of mixtures of microbes in the context of conceptual models for developing symbiotic consortia for biofuel production from lignocellulose. Engineering a symbiosis within consortia is a putative means of improving both process efficiency and stability relative to monoculture. Because microbes often interact and exist attached to surfaces, quorum sensing and biofilm formation are also discussed in terms of consortia development and stability. An engineered, symbiotic culture of multiple organisms may be a means of assembling a novel combination of metabolic capabilities that can efficiently produce biofuel from lignocellulose. (orig.)

Problems of Development and Increase of Economic Efficiency of Sugar Beet Production

Directory of Open Access Journals (Sweden)

Tomashevska Olga A.

2017-06-01

Full Text Available The aim of the article is the studying of the trends of development and economic efficiency of sugar beet production (using the example of agricultural enterprises of Rokytne district of Kyiv region and an attempt to outline the directions for improvement of the situation in the sugar beet industry. As a result of the research, the dynamics of development and economic efficiency of sugar beet production at farms of Rokytne district of Kyiv region is analyzed, and the break-even volume of sugar beet production by agrarian enterprises of Kiev region and an individual enterprise of Rokytne district is determined. Particular attention is paid to the dynamics of profitability of sugar beet production in the period from 2011 to 2015. The main problems hindering the development of sugar beet production are identified, namely, the lack of sales channels and high production costs. Prospects for further research in this area are to increase the economic efficiency of sugar beet production and find ways to develop this sector, provided that the production is properly organized, the manufacturing process is followed, the fertilizers are properly used, the seeds are chosen correctly, advanced technologies and high-performance equipment are applied, etc.

Influential Factors and Strategy of Sustainable Product Development under Corporate Social Responsibility in Taiwan

Directory of Open Access Journals (Sweden)

Jui-Che Tu

2013-01-01

Full Text Available This study aimed to adopt the perspective of corporate social responsibility (CSR to explore the intention of sustainable product development in Taiwan, as well as leading to the creation of influential factors that affect corporate sustainable product development intention. In this research, the induction analysis was conducted to understand the implementation of sustainable product development, and this was supplemented with questionnaire surveys and in-depth interviews to evaluate developmental intention. In addition, principal component analysis was used for factor analysis and content analysis in the 6 W expression method, leading to the creation of the influential factors. The research results have demonstrated that the factors affecting the intention of corporate sustainable product development include having a sustainable design and a development purpose, a corporate development purpose, sustainable development concepts, a sustainable design value, a sustainability concept, and a manufacturing process quality. For sustainable product development, corporate social responsibility needs to be most concerned with the added value of products, regulation requirements, and accommodation of the industrial chain, costs, and quality.

Measuring productivity of research in economics: A cross-country study using DEA

NARCIS (Netherlands)

Kocher, M.; Luptacik, M.; Sutter, M.

2006-01-01

We measure productivity in leading edge economic research by using data envelopment analysis (DEA) for a sample of 21 countries belonging to the Organization for Economic Cooperation and Development (OECD). Publications in ten top journals of economics from 1980 to 1998 are taken as the research

Market Driving to Develop Rabbit Meat Products in Indonesia

OpenAIRE

Atien Priyanti; Yono Cahyo Rahadjo

2012-01-01

Rabbit meat is a nutritional food containing high protein and low cholesterol, fat and sodium. Current research in rabbit production is aimed for developing production strategies to increase the nutritional and economic values of rabbit meat products as functional food. Nowadays, producing rabbit is a popular farming activity in many parts of Indonesia as a small and medium scale operation for food security and cash income. Rabbit farming is to produce meat, skin and hides, fur, organic ferti...

Fission-product burnup chain model for research reactor application

Energy Technology Data Exchange (ETDEWEB)

Kim, Jung Do; Gil, Choong Sup; Lee, Jong Tai [Korea Atomic Energy Research Inst., Daeduk (Republic of Korea)

1990-12-01

A new fission-product burnup chain model was developed for use in research reactor analysis capable of predicting the burnup-dependent reactivity with high precision over a wide range of burnup. The new model consists of 63 nuclides treated explicitly and one fissile-independent pseudo-element. The effective absorption cross sections for the preudo-element and the preudo-element yield of actinide nuclides were evaluated in the this report. The model is capable of predicting the high burnup behavior of low-enriched uranium-fueled research reactors.(Author).

Linking Social and Productive Development Policies for Inclusive ...

International Development Research Centre (IDRC) Digital Library (Canada)

While poverty has declined sharply, more than half of rural Peruvians remain poor. ... Further economic growth in Peru is unlikely to significantly reduce these disparities. ... other federal, regional, and private sector productive development programs ... The funding will support the CIES annual research competition which ...

The Journal of Stored-Products Research: The living history of stored product protection

Science.gov (United States)

This year, the Journal of Stored Products Research (JSPR) completes 52 years of history with publications of research papers. With approx. one hundred articles annually, the JSPR is an important scientific forum for stored product researchers throughout the globe. The aims and scope of JSPR are focu...

Laboratory Directed Research and Development FY 2000

International Nuclear Information System (INIS)

Hansen, Todd; Levy, Karin

2001-01-01

The Ernest Orlando Lawrence Berkeley National Laboratory (Berkeley Lab or LBNL) is a multi-program national research facility operated by the University of California for the Department of Energy (DOE). As an integral element of DOE's National Laboratory System, Berkeley Lab supports DOE's missions in fundamental science, energy resources, and environmental quality. Berkeley Lab programs advance four distinct goals for DOE and the nation: (1) To perform leading multidisciplinary research in the computing sciences, physical sciences, energy sciences, biosciences, and general sciences in a manner that ensures employee and public safety and protection of the environment. (2) To develop and operate unique national experimental facilities for qualified investigators. (3) To educate and train future generations of scientists and engineers to promote national science and education goals. (4) To transfer knowledge and technological innovations and to foster productive relationships among Berkeley Lab's research programs, universities, and industry in order to promote national economic competitiveness. Annual report on Laboratory Directed Research and Development for FY2000

Value of pharmaceuticals: ensuring the future of research and development.

Science.gov (United States)

Serajuddin, Hamida K; Serajuddin, Abu T M

2006-01-01

To analyze the current situation under which the pharmaceutical industry is criticized for the production of drugs with potential adverse effects, the high prices of medicines, and aggressive marketing practices, and to provide a proposal to rectify the situation. Published books, pharmaceutical journals, Web of Science database using the search terms pharmaceutical, research, development, marketing, cost, and the Food and Drug Administration (FDA) Web site. Most breakthroughs in the treatment of diseases and prolongation of lives have come about through pharmaceuticals discovered and developed by the pharmaceutical industry. While the process of discovering and developing new pharmaceuticals is lengthy, costly, and lacking any assurance of success, investment in research and development by the U.S. pharmaceutical industry has increased progressively, reaching 51.3 billion dollars in 2005. Yet the annual number of FDA approvals of new molecular entities (NMEs) has gradually decreased over the past 10 years. Additionally, a large part of the patent life of a successful NME is consumed during this lengthy development phase. Few businesses, if any, have such long product gestation lives and risks. For these reasons, the pharmaceutical industry is often in a rush to recoup its investment before the product's patent expires, and this is the root cause of many criticisms against the pharmaceutical industry. To rectify the current situation, a new system is proposed under which innovator pharmaceutical companies would be allowed royalties for their products after the expiration of patents, in a manner similar to the way in which other intellectual properties (such as books, music, films) are protected by copyright. Such a system would allow pharmaceutical companies to continue research on new pharmaceutical products unimpeded by the patent clock. Given appropriate legislative or other facilitatory actions, a royalty-based system for the marketing of generic products after

Decision making in Global Product Development: Case studies from Danish industry

DEFF Research Database (Denmark)

Søndergaard, Erik Stefan; Ahmed-Kristensen, Saeema

2015-01-01

Globalisation leads engineering firms to replace traditional co-located development with global distributed development activities. They make decisions regarding global product development; often with limited experience and information available. Previous research points towards a need for better...

Marketing research of organic agricultural products' customers

Directory of Open Access Journals (Sweden)

Salai Suzana

2002-01-01

Full Text Available The aim of customers' marketing research is to acquire information about the way domestic customers behave towards organic agricultural products. This research focuses the overview of conditions and factors influencing customer behavior in nutrition processes in the EM and in Yugoslavia. The acquired information about changes and directions directly affect the possibilities of getting involved into supply processes as well as the 'transmission' of some directions in customer behavior. Anticipations based, on marketing research deal with changes on customers' level, in consumption, products and other competitors. The results of a part of problems concerning customer behavior in nutrition processes follow below, with an emphasis on organic agricultural products.

Development of Lubeg (Syzygiumlineatum (Roxb. Merr.& Perry Processed Products

Directory of Open Access Journals (Sweden)

Ronald O. Ocampo

2015-11-01

Full Text Available Lubeg(Syzygiumlineatum(Roxb. Merr.& Perry is a lesser known fruit in the province of Apayao, Philippines. It is a highly perishable fruit and belongs to family Myrtaceae. The primary object of this study is to develop processed products from lubeg fruits. The experimental method of research was conducted. From the result of the study, the following are concluded: Lubeg wine is preferred over other locally produced wine namely bignay and duhat. However, no significant differences were observed in their taste, appearance and aroma. On the other hand, strawberry jam is preferred over lubegandbignay jam. No significant differences were observed in their taste, appearance and aroma. Lubeg fruit preserves, Jam and jelly can be best used as fillers to baked products when mixed with pineapple jam; lubeg juice can be improved when mixed with lemongrass in 1:2, 1:1 and 2:1 ratio. In the light of the findings and conclusion, the following are forwarded as recommendations: mass production of lubeg products should be done; promotion of the developed technology through trainings and attendance to trade fairs should be done; and similar research should be conducted using other flavors fruits or herbs to improve the quality of lubeg products.

Research on Digital Product Modeling Key Technologies of Digital Manufacturing

Institute of Scientific and Technical Information of China (English)

DING Guoping; ZHOU Zude; HU Yefa; ZHAO Liang

2006-01-01

With the globalization and diversification of the market and the rapid development of Information Technology (IT) and Artificial Intelligence (AI), the digital revolution of manufacturing is coming. One of the key technologies in digital manufacturing is product digital modeling. This paper firstly analyzes the information and features of the product digital model during each stage in the product whole lifecycle, then researches on the three critical technologies of digital modeling in digital manufacturing-product modeling, standard for the exchange of product model data and digital product data management. And the potential signification of the product digital model during the process of digital manufacturing is concluded-product digital model integrates primary features of each stage during the product whole lifecycle based on graphic features, applies STEP as data exchange mechanism, and establishes PDM system to manage the large amount, complicated and dynamic product data to implement the product digital model data exchange, sharing and integration.

Finding the Words to Work Together: Developing a Research Design to Explore Risk and Adult Protection in Co-Produced Research

Science.gov (United States)

Brookes, Ian; Archibald, Sylvia; McInnes, Kerry; Cross, Beth; Daniel, Brigid; Johnson, Fiona

2012-01-01

Although co-production of research with people who access support services is increasingly common, details about how people who access support services can take more of an assertive role in developing research proposals and method design remains sketchy. This article reflects on the development of a research project on adult protection practice in…

Sustainability or Colonialism? Legislative obstacles to research and development of natural products and patents on traditional knowledge in Brazil

Directory of Open Access Journals (Sweden)

Camilo Tomazini Pedrollo

2015-09-01

Full Text Available ABSTRACTHistorically, developed countries have benefited from the biodiversity and traditional knowledge of developing countries. Since the Convention on Biological Diversity (CBD was approved, the world-view regarding access to biological resources has changed. This change marked the introduction of legal agreements regarding access to genetic resources, traditional knowledge and benefit sharing, seeking a fair return for owners and local communities. Unfortunately, as with most national laws, these legal devices complicated collection programs and research initiatives, and diminished the emphasis on the discovery of natural products. There remains a lack of discussion on the establishment of a fair international market value for the access to genetic resources. While Brazil still has advantages and opportunities in this arena, the issue sets barriers for research and development. The protective measures are being reviewed in the project bill 7735/2014, which brings improvements, yet it is still controversial. For this short communication we consulted journals, conference proceedings, as well as scientific and journalistic magazines to report some of the disastrous consequences of the implementation of national laws regarding CBD. We suggest a new focus for decision-making policies based on more efficient field inspections, the empowerment of traditional communities and further associated research in order to ensure the claims of CBD as well as to ratify the Nagoya Protocol.

North American long-term soil productivity research program

Science.gov (United States)

Allan E. Tiarks; Robert F. Powers; Jerry F. Ragus; Deborah S. Page-Dumroese; Felix Ponder; Douglas M. Stone

1997-01-01

The National Long-term Soil Productivity research program was chartered to address National Forest Management Act concerns over possible losses n soil productivity on national forest lands. The program supports validation of soil quality monitoring standards and process-level productivity research. Summarized results are supplied to forests as collected. National...

Assessing consumer responses to potential reduced-exposure tobacco products: a review of tobacco industry and independent research methods.

Science.gov (United States)

Rees, Vaughan W; Kreslake, Jennifer M; Cummings, K Michael; O'Connor, Richard J; Hatsukami, Dorothy K; Parascandola, Mark; Shields, Peter G; Connolly, Gregory N

2009-12-01

Internal tobacco industry documents and the mainstream literature are reviewed to identify methods and measures for evaluating tobacco consumer response. The review aims to outline areas in which established methods exist, identify gaps in current methods for assessing consumer response, and consider how these methods might be applied to evaluate potentially reduced exposure tobacco products and new products. Internal industry research reviewed included published articles, manuscript drafts, presentations, protocols, and instruments relating to consumer response measures were identified and analyzed. Peer-reviewed research was identified using PubMed and Scopus. Industry research on consumer response focuses on product development and marketing. To develop and refine new products, the tobacco industry has developed notable strategies for assessing consumers' sensory and subjective responses to product design characteristics. Independent research is often conducted to gauge the likelihood of future product adoption by measuring consumers' risk perceptions, responses to product, and product acceptability. A model that conceptualizes consumer response as comprising the separate, but interacting, domains of product perceptions and response to product is outlined. Industry and independent research supports the dual domain model and provides a wide range of methods for assessment of the construct components of consumer response. Further research is needed to validate consumer response constructs, determine the relationship between consumer response and tobacco user behavior, and improve reliability of consumer response measures. Scientifically rigorous consumer response assessment methods will provide a needed empirical basis for future regulation of potentially reduced-exposure tobacco products and new products, to counteract tobacco industry influence on consumers, and enhance the public health.

The Perceived Impact of the Agile Development and Project Management Method Scrum on Information Systems and Software Development Productivity

Directory of Open Access Journals (Sweden)

Karlheinz Kautz

2014-11-01

Full Text Available This research contributes to the body of knowledge in information systems development (ISD with an empirical investigation in form of a case study that demonstrates the positive impact of the agile development and project management method Scrum on information systems and software development productivity and it provides a useful operationalization of the concept through seven identified indicators for productivity. Despite the fact that the case unit had challenges with the use of Scrum, the indicators identified the areas where the company had managed to exploit the potential of Scrum and its practices with regard to increasing productivity. The research results are discussed both with regard to the existing Scrum literature as well as to complex adaptive systems (CAS as a foundation for ISD and agile development.

Role of fission product in whole core accidents: research in the USA

International Nuclear Information System (INIS)

Jackson, J.F.; Deitrich, L.W.

1977-01-01

The techniques being developed in the United States for analyzing postulated whole-core accidents in LMFBRs are briefly reviewed. The key mechanistic analysis methods are discussed in detail. Important research projects in the area of fission product effects are examined. Some typical results on the role of fission products in whole-core accidents are presented

Testing Software Development Project Productivity Model

Science.gov (United States)

Lipkin, Ilya

Software development is an increasingly influential factor in today's business environment, and a major issue affecting software development is how an organization estimates projects. If the organization underestimates cost, schedule, and quality requirements, the end results will not meet customer needs. On the other hand, if the organization overestimates these criteria, resources that could have been used more profitably will be wasted. There is no accurate model or measure available that can guide an organization in a quest for software development, with existing estimation models often underestimating software development efforts as much as 500 to 600 percent. To address this issue, existing models usually are calibrated using local data with a small sample size, with resulting estimates not offering improved cost analysis. This study presents a conceptual model for accurately estimating software development, based on an extensive literature review and theoretical analysis based on Sociotechnical Systems (STS) theory. The conceptual model serves as a solution to bridge organizational and technological factors and is validated using an empirical dataset provided by the DoD. Practical implications of this study allow for practitioners to concentrate on specific constructs of interest that provide the best value for the least amount of time. This study outlines key contributing constructs that are unique for Software Size E-SLOC, Man-hours Spent, and Quality of the Product, those constructs having the largest contribution to project productivity. This study discusses customer characteristics and provides a framework for a simplified project analysis for source selection evaluation and audit task reviews for the customers and suppliers. Theoretical contributions of this study provide an initial theory-based hypothesized project productivity model that can be used as a generic overall model across several application domains such as IT, Command and Control

Extending product modeling methods for integrated product development

DEFF Research Database (Denmark)

Bonev, Martin; Wörösch, Michael; Hauksdóttir, Dagný

2013-01-01

Despite great efforts within the modeling domain, the majority of methods often address the uncommon design situation of an original product development. However, studies illustrate that development tasks are predominantly related to redesigning, improving, and extending already existing products...... and PVM methods, in a presented Product Requirement Development model some of the individual drawbacks of each method could be overcome. Based on the UML standard, the model enables the representation of complex hierarchical relationships in a generic product model. At the same time it uses matrix....... Updated design requirements have then to be made explicit and mapped against the existing product architecture. In this paper, existing methods are adapted and extended through linking updated requirements to suitable product models. By combining several established modeling techniques, such as the DSM...

Hardware Development Process for Human Research Facility Applications

Science.gov (United States)

Bauer, Liz

2000-01-01

The simple goal of the Human Research Facility (HRF) is to conduct human research experiments on the International Space Station (ISS) astronauts during long-duration missions. This is accomplished by providing integration and operation of the necessary hardware and software capabilities. A typical hardware development flow consists of five stages: functional inputs and requirements definition, market research, design life cycle through hardware delivery, crew training, and mission support. The purpose of this presentation is to guide the audience through the early hardware development process: requirement definition through selecting a development path. Specific HRF equipment is used to illustrate the hardware development paths. The source of hardware requirements is the science community and HRF program. The HRF Science Working Group, consisting of SCientists from various medical disciplines, defined a basic set of equipment with functional requirements. This established the performance requirements of the hardware. HRF program requirements focus on making the hardware safe and operational in a space environment. This includes structural, thermal, human factors, and material requirements. Science and HRF program requirements are defined in a hardware requirements document which includes verification methods. Once the hardware is fabricated, requirements are verified by inspection, test, analysis, or demonstration. All data is compiled and reviewed to certify the hardware for flight. Obviously, the basis for all hardware development activities is requirement definition. Full and complete requirement definition is ideal prior to initiating the hardware development. However, this is generally not the case, but the hardware team typically has functional inputs as a guide. The first step is for engineers to conduct market research based on the functional inputs provided by scientists. CommerCially available products are evaluated against the science requirements as

Flood Fighting Products Research Facility

Data.gov (United States)

Federal Laboratory Consortium — A wave research basin at the ERDC Coastal and Hydraulics Laboratory has been modified specifically for testing of temporary, barrier-type, flood fighting products....

Application of productive research tasks in working with gifted students in teaching Serbian language and literature

Directory of Open Access Journals (Sweden)

Stakić Mirjana M.

2015-01-01

Full Text Available In the work we examine the possibility of application of productive research tasks in working with gifted students in teaching Serbian language and literature. Using specific examples of interpretations of literary works we show that productive research assignments encourage students' creative and inventive expression, creativity, imagination and criticality and enable them to develop in accordance with their personality, individual preferences and abilities. In the examples of their use in problem solving, we determine how productive research tasks are conducive to gifted students who need to learn through problem solving and school work and to experience learning as a challenge. They present the basis for independent research, which allows gifted students to express their own creativity and the need to acquire new, challenging knowledge, and represent a powerful motivational tool that teachers can use in order to further develop their talent. Creative application of the productive research tasks in teaching Serbian language and literature is the possibility that the education of gifted students is not treated as elitist question, but to transform teaching process into development of giftedness and talent, where the role of the teacher in the teaching process rises to the role of the mentor.

An analysis of development and research on spent nuclear fuel reprocessing

International Nuclear Information System (INIS)

Borges Silverio, Leticia; Queiroz Lamas, Wendell de

2011-01-01

Nuclear energy comes back to the discussions on the world stage as an energy source that does not contribute to global warming during production process. It can be chosen as the main source of power generation in some countries or complement the energy matrix in others. In this context, there is the need to develop new technologies for the management of radioactive waste generated by the production process. Final repositories for spent fuel are not yet in commercial operation, and techniques for fuel reprocessing have been developed, because after use, the fuel still has materials that produce energy. Some countries already use reprocessing, and develop research to make it more secure and more competitive, while others prefer to adopt policies to prevent developments in this area due to the problem of nuclear proliferation. In another line of research, new reactors are being developed in order to reduce the amount of waste in energy production and some will be designed to work in closed loop, recycling the materials generated.

An analysis of development and research on spent nuclear fuel reprocessing

Energy Technology Data Exchange (ETDEWEB)

Borges Silverio, Leticia; Lamas, Wendell de Queiroz [University of Taubate, Postgraduate Programme in Mechanical Engineering, Rua Daniel Danelli, s/n, Jd. Morumbi, Taubate, SP 12060-440 (Brazil)

2011-01-15

Nuclear energy comes back to the discussions on the world stage as an energy source that does not contribute to global warming during production process. It can be chosen as the main source of power generation in some countries or complement the energy matrix in others. In this context, there is the need to develop new technologies for the management of radioactive waste generated by the production process. Final repositories for spent fuel are not yet in commercial operation, and techniques for fuel reprocessing have been developed, because after use, the fuel still has materials that produce energy. Some countries already use reprocessing, and develop research to make it more secure and more competitive, while others prefer to adopt policies to prevent developments in this area due to the problem of nuclear proliferation. In another line of research, new reactors are being developed in order to reduce the amount of waste in energy production and some will be designed to work in closed loop, recycling the materials generated. (author)

Presentation of the results of 1993-1994 of the peat production research area; Turvetuotanto - tutkimusalueen katsaus

Energy Technology Data Exchange (ETDEWEB)

Leinonen, A.

1996-12-31

The development target of the peat production research area of the Biomass research programme is to improve the competitivity of peat by reducing the production costs by 20 % (5-6 FIM/MWh) from the level of 1992 and to reduce the environmental load. The main targets of peat production, by which the target can be met, are ditching and preparation technologies, drying technology, machine technology, methodology, integration of wood harvesting and peat production, and application of the results of the Optimiturve research programme in practice. The objectives of the peat production research are possible to meet if the partial targets are met. Increment of the open-ditch distance from 20 m to 60 m reduces the production costs by 5.0 %, increment of the rate of utilization of solar radiation from 30 % to 40 % reduces the production costs by 8 %, reduction of the amount of residual peat from 3000 MWh to 1500 MWh reduces the costs by 6.5 %, development of light and firesafe machines by 3 %, and integrated harvesting of wood by 3 %. Meeting of the partial targets reduces the production costs by 24 %. The main research areas of peat production will be carried out further. The total funding of the peat production researches in 1993-1994 was 19.4 million FIM (9.7 million FIM/a). The share of the total funding of the research organization projects has been 6.7 million FIM and that of the company projects 12.7 million FIM. The share of the Finnish Ministry of Trade and Industry of the funding has been 9.0 million FIM (46 %)

Connecting Social Actors in Developing Integrated Tourism Products

Directory of Open Access Journals (Sweden)

Lea-Marija Colarič-Jakše

2015-03-01

tourismscapes need different formal and informal structures of collaboration like various kind of consortia that empower social capital and enable the continuous generating of new innovative products in tourism sector. Originality: Conditional paths that are in the core of the collaborative networking develop the new gaze on the innovative agency by replacing the rigid and static planning of collaboration in tourism. The model originally develops new ways of the coordination of the interests of to urism stakeholders that cooperate in the process of innovation of integral tourism products. Limitations/Future Research: The limitation is the timing of the gathering of the data about the collaborative networking. We did not conduct the longitudinal re search and the research results and findings cannot reflect the processes of the collaborative networking. Future research should include tourism stakeholders from other tourismscapes, because tourism is distinctly international endeavour. The comparison between different tourismscapes would show the differences and comparative advantages between tourismscapes regarding collaborative networking and its effects.

Model development of production management unit to enhance entrepreneurship attitude of vocational school students from fashion department

Science.gov (United States)

Sumaryani, Sri

2018-03-01

The purpose of this study is to develop a model of production management unit to enhance entrepreneurship attitude of vocational school students from fashion department. This study concerns in developing students' entrepreneurship attitude in management which includes planning, organizing, applying and evaluation. The study uses Research and Development (R & D) approach with three main steps; preliminary study, development step, and product validation. Research subject was vocational school teachers from fashion department in Semarang, Salatiga and Demak. This study yields a development model of production management unit that could enhance vocational school students' entrepreneurship attitude in fashion department. The result shows that research subjects have understood about of production management unit in Vocational School (SMK).

Food production - Present and future development

International Nuclear Information System (INIS)

Lamm, C.G.

1974-01-01

This year the joint FAO/IAEA Division of Atomic Energy in Food and Agriculture celebrates its 10th anniversary. The aim of these two United Nations organizations is to ensure that the technical services of both FAO and IAEA are fully co-ordinated and their programmes are designed to assist developing Member States to apply isotopes and radiation techniques to the solution of food and agricultural problems. More precisely, the medium-term objectives of the Joint Division are to exploit the potential of nuclear techniques in research and development for increasing and stabilizing agricultural production, improving food quality, protecting agricultural products from spoilage and losses and minimizing pollution of food and the agricultural environment. This account of what radioisotopes can do for man in the agricultural field is therefore to a great extent a review of the activities of the Joint Division and a prediction of its future fields of emphasis, especially in the light of the present long-range and world-wide food crisis. (author)

Development of small-scale peat production; Pienturvetuotannon kehittaeminen

Energy Technology Data Exchange (ETDEWEB)

Erkkilae, A.; Kallio, E. [VTT Energy, Jyvaeskylae (Finland)

1997-12-01

The aim of the project is to develop production conditions, methods and technology of small-scale peat production to such a level that the productivity is improved and competitivity maintained. The aim in 1996 was to survey the present status of small-scale peat production, and research and development needs and to prepare a development plan for small-scale peat production for a continued project in 1997 and for the longer term. A questionnaire was sent to producers by mail, and its results were completed by phone interviews. Response was obtained from 164 producers, i.e. from about 75 - 85 % of small-scale peat producers. The quantity of energy peat produced by these amounted to 3.3 TWh and that of other peat to 265 000 m{sup 3}. The total production of energy peat (large- scale producers Vapo Oy and Turveruukki Oy included) amounted to 25.0 TWh in 1996 in Finland, of which 91 % (22.8 TWh) was milled peat and 9 % (2.2 TWh) of sod peat. The total production of peat other than energy peat amounted to 1.4 million m{sup 3}. The proportion of small-scale peat production was 13 % of energy peat, 11 % of milled peat and 38 % of sod peat. The proportion of small-scale producers was 18 % of other peat production. The results deviate clearly from those obtained in a study of small-scale production in the 1980s. The amount of small-scale production is clearly larger than generally assessed. Small-scale production focuses more on milled peat than on sod peat. The work will be continued in 1997. Based on development needs appeared in the questionnaire, the aim is to reduce environmental impacts and runoff effluents from small- scale production, to increase the efficiency of peat deliveries and to reduce peat production costs by improving the service value of machines by increasing co-operative use. (orig.)

Consumer oriented new product development

DEFF Research Database (Denmark)

van Trijp, Hans C.M.; Grunert, Klaus G

2014-01-01

New product development is a necessary activity for a company’s competitiveness, profitability and growth. However, new product development is a risky activity as a large percentage of new product introductions fail to achieve their commercial targets. The present chapter reviews the existing evi...... evidence on new product success and failure factors. From that it introduces the perspective of consumer-oriented new product development as a way to balance new technological opportunity against identified consumer needs and desires....

SPECIFIC FEATURES OF DEVELOPMENT OF ORGANIC PRODUCTS MARKET IN UKRAINE

Directory of Open Access Journals (Sweden)

T. Kharchenko

2013-08-01

Full Text Available The article is dedicated to the development of new and improvement of existing theoretical and methodological basis of forming and developing the market of organic products, its correspondence to the present-day situation, determination of problems and ways of their solving, introduction in practical activity of Ukrainian enterprises. The main objective of the article is to determine the specific features of forming and developing organic products market in Ukraine, and the perspective directions of its development based on analysis and practice of functioning of such markets in the world. The environmentally sound products market in the world is being analyzed, some information on the countries with the most commodity turnover of organic products, structure of international market of organic products, volumes of sales of organic products in the European countries is provided. As a result of studying the modern trends of economic development the authors reach a conclusion on problems of standard introduction, investigate the European norms and requirements for organic products. The conducted research allows distinguishing the basic features of Ukrainian market of organic products: it quickly grows, which makes it especially appealing for the participants of market relations, however entry into this market requires considerable capital investments and is characterized by high risk; criteria for qualifying products as environmentally sound products are unstructured and unclear. The potential for growth of organic products market in Ukraine is examined.

Patterns of biomedical science production in a sub-Saharan research center

Directory of Open Access Journals (Sweden)

Agnandji Selidji T

2012-03-01

Full Text Available Abstract Background Research activities in sub-Saharan Africa may be limited to delegated tasks due to the strong control from Western collaborators, which could lead to scientific production of little value in terms of its impact on social and economic innovation in less developed areas. However, the current contexts of international biomedical research including the development of public-private partnerships and research institutions in Africa suggest that scientific activities are growing in sub-Saharan Africa. This study aims to describe the patterns of clinical research activities at a sub-Saharan biomedical research center. Methods In-depth interviews were conducted with a core group of researchers at the Medical Research Unit of the Albert Schweitzer Hospital from June 2009 to February 2010 in Lambaréné, Gabon. Scientific activities running at the MRU as well as the implementation of ethical and regulatory standards were covered by the interview sessions. Results The framework of clinical research includes transnational studies and research initiated locally. In transnational collaborations, a sub-Saharan research institution may be limited to producing confirmatory and late-stage data with little impact on economic and social innovation. However, ethical and regulatory guidelines are being implemented taking into consideration the local contexts. Similarly, the scientific content of studies designed by researchers at the MRU, if local needs are taken into account, may potentially contribute to a scientific production with long-term value on social and economic innovation in sub-Saharan Africa. Conclusion Further research questions and methods in social sciences should comprehensively address the construction of scientific content with the social, economic and cultural contexts surrounding research activities.

Developing A Large-Scale, Collaborative, Productive Geoscience Education Network

Science.gov (United States)

Manduca, C. A.; Bralower, T. J.; Egger, A. E.; Fox, S.; Ledley, T. S.; Macdonald, H.; Mcconnell, D. A.; Mogk, D. W.; Tewksbury, B. J.

2012-12-01

Over the past 15 years, the geoscience education community has grown substantially and developed broad and deep capacity for collaboration and dissemination of ideas. While this community is best viewed as emergent from complex interactions among changing educational needs and opportunities, we highlight the role of several large projects in the development of a network within this community. In the 1990s, three NSF projects came together to build a robust web infrastructure to support the production and dissemination of on-line resources: On The Cutting Edge (OTCE), Earth Exploration Toolbook, and Starting Point: Teaching Introductory Geoscience. Along with the contemporaneous Digital Library for Earth System Education, these projects engaged geoscience educators nationwide in exploring professional development experiences that produced lasting on-line resources, collaborative authoring of resources, and models for web-based support for geoscience teaching. As a result, a culture developed in the 2000s in which geoscience educators anticipated that resources for geoscience teaching would be shared broadly and that collaborative authoring would be productive and engaging. By this time, a diverse set of examples demonstrated the power of the web infrastructure in supporting collaboration, dissemination and professional development . Building on this foundation, more recent work has expanded both the size of the network and the scope of its work. Many large research projects initiated collaborations to disseminate resources supporting educational use of their data. Research results from the rapidly expanding geoscience education research community were integrated into the Pedagogies in Action website and OTCE. Projects engaged faculty across the nation in large-scale data collection and educational research. The Climate Literacy and Energy Awareness Network and OTCE engaged community members in reviewing the expanding body of on-line resources. Building Strong

Product/Service-System Development

DEFF Research Database (Denmark)

Tan, Adrian; McAloone, Timothy Charles; Gall, Catherine

2007-01-01

‘Product/service-systems’ (PSS) are innovation strategies where instead of focusing on the value of selling physical products, one focuses on the value of the utility of products and services throughout the product’s life period. This approach enables companies to provide customers with offerings...... that continuously deliver value and create a strong competitive advantage. PSS attempts to transcend the old industrial credo that value is embedded in products and the consideration of ‘cost-quality-time’ relates to the physical artefact. While there is increasing interest in PSS, limited research has been done...

Intention to Purchase Products under Volume Discount Scheme: A Conceptual Model and Research Propositions

Directory of Open Access Journals (Sweden)

Mohammad Iranmanesh

2014-12-01

Full Text Available Many standard brands sell products under the volume discount scheme (VDS as more and more consumers are fond of purchasing products under this scheme. Despite volume discount being commonly practiced, there is a dearth of research, both conceptual and empirical, focusing on purchase characteristics factors and consumer internal evaluation concerning the purchase of products under VDS. To attempt to fill this void, this article develops a conceptual model on VDS with the intention of delineating the influence of the purchase characteristics factors on the consumer intention to purchase products under VDS and provides an explanation of their effects through consumer internal evaluation. Finally, the authors discuss the managerial implications of their research and offer guidelines for future empirical research.

Regional Research Networking: A Stimulus to Research Collaboration and Research Productivity.

Science.gov (United States)

McElmurry, Beverly J.; Minckley, Barbara B.

1986-01-01

Models for collegial networking as a means of increasing the participants' scholarly productivity are presented. A Midwestern historical methodology research interest group is described as an example of the long-term benefits of forming networks of scholars. (MSE)

Faculty research productivity and organizational structure in schools of nursing.

Science.gov (United States)

Kohlenberg, E M

1992-01-01

The purpose of this study was to identify the relationship between faculty research productivity and organizational structure in schools of nursing. The need for nursing research has been widely recognized by members of the nursing profession, yet comparatively few engage in conducting research. Although contextual variables have been investigated that facilitate or inhibit nursing research, the relationship between organizational structure and nursing research productivity has not been examined. This problem was examined within the context of the Entrepreneurial Theory of Formal Organizations. A survey methodology was used for data collection. Data on individual faculty research productivity and organizational structure in the school of nursing were obtained through the use of a questionnaire. A random sample of 300 faculty teaching in 60 master's and doctoral nursing schools in the United States was used. The instruments for data collection were Wakefield-Fisher's Adapted Scholarly Productivity Index and Hall's Organizational Inventory. The data were analyzed using Pearson Product-Moment Correlation Coefficients and multiple correlation/regression techniques. The overall relationship between faculty research productivity and organizational structure in schools of nursing was not significant at the .002 level of confidence. Although statistically significant relationships were not identified, scholarly research productivity and its subscale prepublication and research activities tended to vary positively with procedural specifications in a highly bureaucratic organizational structure. Further research may focus on identification of structural variables that support highly productive nurse researchers.

Affordability for sustainable energy development products

International Nuclear Information System (INIS)

Riley, Paul H.

2014-01-01

Highlights: • Clean cookstoves that also generate electricity improve affordability. • Excel spreadsheet model to assist stakeholders to choose optimum technology. • Presents views for each stakeholder villager, village and country. • By adding certain capital costs, affordability and sustainability are improved. • Affordability is highly dependent on carbon credits and social understandings. - Abstract: Clean burning products, for example cooking stoves, can reduce household air pollution (HAP), which prematurely kills 3.5 million people each year. By careful selection of components into a product package with micro-finance used for the capital payment, barriers to large-scale uptake of products that remove HAP are reduced. Such products reduce smoke from cooking and the lighting from electricity produced, eliminates smoke from kerosene lamps. A bottom-up financial model, that is cognisant of end user social needs, has been developed to compare different products for use in rural areas of developing countries. The model is freely available for use by researchers and has the ability to assist in the analysis of changing assumptions. Business views of an individual villager, the village itself and a country view are presented. The model shows that affordability (defined as the effect on household expenses as a result of a product purchase) and recognition of end-user social needs are as important as product cost. The effects of large-scale deployment (greater that 10 million per year) are described together with level of subsidy required by the poorest people. With the assumptions given, the model shows that pico-hydro is the most cost effective, but not generally available, one thermo-acoustic technology option does not require subsidy, but it is only at technology readiness level 2 (NASA definition) therefore costs are predicted and very large investment in manufacturing capability is needed to meet the cost target. Thermo-electric is currently the only

The role of sensory perception in the development and targeting of tobacco products.

Science.gov (United States)

Carpenter, Carrie M; Wayne, Geoffrey Ferris; Connolly, Gregory N

2007-01-01

To examine tobacco industry research on smoking-related sensory effects, including differences in sensory perception across smoker groups, and to determine whether this research informed targeted product development and impacted the development of commercial tobacco products. We searched previously secret internal tobacco industry documents available online through document databases housed at Tobacco Documents Online, the British American Tobacco Document Archive and the Legacy Tobacco Documents Library. We identified relevant documents using a snowball sampling method to first search the databases using an initial set of key words and to then establish further search terms. Sensory research is a priority within the tobacco industry directly impacting commercial markets both in the United States and internationally. Sensory factors contribute to smoker satisfaction and product acceptance, and play an important role in controlling puffing behavior. Cigarette manufacturers have capitalized on distinct sensory preferences across gender, age and ethnic groups by tailoring products for specific populations. Regulation of tobacco products is needed to address product changes that are used to reinforce or contribute to tobacco dependence; for instance, the incorporation of additives that target attributes such as smoothness, harshness and aftertaste. Greater understanding of the role of sensory effects on smoking behavior may also help to inform the development of tobacco treatment options that support long-term tobacco abstinence.

Improving product development performance through knowledge outsourcing: a study of the Iranian automotive industry

Directory of Open Access Journals (Sweden)

Mazdeh, Mohammad Mahdavi

2016-08-01

Full Text Available This study aims to explore the dynamics of the knowledge supply process for new product development in the automotive industry, and to evaluate the impact of knowledge outsourcing on new product development performance. The model was developed using a literature review and a multiple case study approach that looked at ten research and development companies from the automotive industry in Iran. The results indicate that knowledge outsourcing would improve new product development performance by increasing the flexibility of the new product development process to react to the environment’s volatility, with few penalties in time and costs for automotive product development.

Establishing a 'track record': research productivity and nursing academe.

Science.gov (United States)

Emden, C

1998-01-01

Many nursing academics in Australia are finding to their dismay that an outstanding teaching career and exemplary professional contribution to their field--and a PhD--are not enough to achieve promotion within their university, or secure a new academic post. One must also possess a proven or established 'track record' in research and publication. The operational funding arrangements for Australian universities rely in part on the research productivity of their academic staff members. This places special expectation upon the way academics conduct their scholarly work. Nursing academics are under particular pressure: as relative newcomers to the university scene, most find themselves considered as early career researchers with weak track records. This paper reviews relevant research and draws upon personal experience in the area of research development, to highlight how nursing academics may most strategically establish a research and publication record with a view to career advancement.

What we do | Page 80 | IDRC - International Development Research ...

International Development Research Centre (IDRC) Digital Library (Canada)

Sustainable Production of Underutilized Vegetables to Enhance Rural Food Security (CIFSRF). Indigenous vegetables are extremely important to poor rural women but have received little attention from the research, development and policy community. Nigeria, North Of Sahara, South Of Sahara, Canada. PROJECT ...

What we do | Page 63 | IDRC - International Development Research ...

International Development Research Centre (IDRC) Digital Library (Canada)

providing developing-country researchers with financial resources, advice, ... needs-based resource allocation methods, and benefit incidence analysis of ... The Role of Civil Society in Influencing Public Health Policy for Indigenous ... Promoting Innovation in the Services Sector: Toward Productivity and Competitiveness.

Research on the ITOC based scheduling system for ship piping production

Science.gov (United States)

Li, Rui; Liu, Yu-Jun; Hamada, Kunihiro

2010-12-01

Manufacturing of ship piping systems is one of the major production activities in shipbuilding. The schedule of pipe production has an important impact on the master schedule of shipbuilding. In this research, the ITOC concept was introduced to solve the scheduling problems of a piping factory, and an intelligent scheduling system was developed. The system, in which a product model, an operation model, a factory model, and a knowledge database of piping production were integrated, automated the planning process and production scheduling. Details of the above points were discussed. Moreover, an application of the system in a piping factory, which achieved a higher level of performance as measured by tardiness, lead time, and inventory, was demonstrated.

The effects assessment of firm environmental strategy and customer environmental conscious on green product development.

Science.gov (United States)

Tsai, Ming-Tien; Chuang, Li-Min; Chao, Shu-Tsung; Chang, Hsiao-Ping

2012-07-01

The purpose of this study is to examine why both parties (industry and consumer market) have mutual interests in protecting the environment but they still are hesitant to act green. The study used two-stage sampling from consumer market to depict ideal green product characteristics and reliable toy companies, and visit these companies for the second sample collection to examine whether the organizational eco-innovation strategy with customer value has a positive effect on green product development. In other words, the customer's benefit is an important factor for new product development strategy for green toys. This research shows that the willingness to buy green toys increases if most people in society buy green toys. This represents that customers are environmentally conscious and care about protecting the environment, or buying green toys is the result of a new economic trend and childhood education. The willingness to buy green toys increases if customers think that green products implies an enhancement on new product development to toy manufacturers. Further, if manufacturers are able to manage the difficulty of cooperation with all parties in the supply chain and difficulties related to production, they are willing to adopt customers' perceived value on green toys for their new product development strategy. It is rare to find academic research discussing the perspectives of both consumers and manufacturers in the same study because the research topic is very broad and many conditions must be considered. This research aims to find the effect of consumer-perceived value and company eco-innovation on green product development.

Research Mentorship Program (RMP to Enhance the Research Productivity in a Psychiatric Hospital: First Report

Directory of Open Access Journals (Sweden)

Zhila Afshar

2011-12-01

Full Text Available Background: Despite rapid movement in student research in recent years, there is still little evidence that shows the impact of students' activities on research productivity. In this RMP (Research Mentorship Program, we have tried to create a link between medical students with little experience and the professors in the field of medicine. This research was led by a group of medical students who are highly experienced in research. The aim of this study has been to evaluate the impact of the RMP on research productivity.Methods: The Research Mentorship Program began in July 2009 and the program continued for 6 months. After that initial period, the results were evaluated following another 18 months. Some of the interventions included: introducing the RMP to the students; student meetings of the RMP; meetings with the professors; designing a psychiatric history and mental status examination checklist; and research workshops.Results: In eleven semi years, the research productivity scores were evaluated, including eight semi years before interventions and 3 semi years after it. The results show a significant increase in the research productivity score after the RMP in comparison to the research productivity score before it (P-value=0.047. The mean RPS before the RMP was 16.56±7.30 and the score changed to 28.16±7.94 after the RMP.Conclusions: This study shows that with suitable interventions the student researcher’s have the potential to increase research productivity.

Laboratory Directed Research and Development FY 2000

Energy Technology Data Exchange (ETDEWEB)

Hansen, Todd; Levy, Karin

2001-02-27

The Ernest Orlando Lawrence Berkeley National Laboratory (Berkeley Lab or LBNL) is a multi-program national research facility operated by the University of California for the Department of Energy (DOE). As an integral element of DOE's National Laboratory System, Berkeley Lab supports DOE's missions in fundamental science, energy resources, and environmental quality. Berkeley Lab programs advance four distinct goals for DOE and the nation: (1) To perform leading multidisciplinary research in the computing sciences, physical sciences, energy sciences, biosciences, and general sciences in a manner that ensures employee and public safety and protection of the environment. (2) To develop and operate unique national experimental facilities for qualified investigators. (3) To educate and train future generations of scientists and engineers to promote national science and education goals. (4) To transfer knowledge and technological innovations and to foster productive relationships among Berkeley Lab's research programs, universities, and industry in order to promote national economic competitiveness. Annual report on Laboratory Directed Research and Development for FY2000.

Bioenergy Research Programme, Yearbook 1995. Peat and field biomass production; Bioenergian tutkimusohjelma, vuosikirja 1995. Turpeen ja peltobiomassojen tuotantotekniikka

Energy Technology Data Exchange (ETDEWEB)

Alakangas, E. [ed.

1996-12-31

Bioenergy Research Programme is one of the energy technology research programmes of the Technology Development Center TEKES. The aim of the bioenergy Research Programme is to increase, by using technical research and development, the economically profitable and environmentally sound utilisation of bioenergy, to improve the competitiveness of present peat and wood fuels, and to develop new competitive fuels and equipment related to bioenergy. The funding for 1995 was nearly 52 million FIM and the number of projects 66. The development target for peat production technology is to improve the competitiveness of peat by reducing the production costs by 20 % from the level of 1992 (5-6 FIM/MWh) and to reduce the environmental load. In addition to this, the main parts of the production methods will be demonstrated. In 1995 there were 10 projects going on in the field of peat production. The results of 1995 projects will be presented in this publication. Field biomass research started in the Bioenergy Research Programme in 1994. The number of projects was three, funded mainly by the Finnish Ministry of Agriculture and Forestry. The results of previous researches show that economically most promising possibilities are in the utilization of straw and reed canary grass

FORMATION AND DEVELOPMENT OF INSTITUTIONS OF EFFICIENCY PRODUCTION INFRASTRUCTURE

Directory of Open Access Journals (Sweden)

Anzor H. Jankaziev

2015-01-01

Full Text Available The article presents the methodological andmethodical bases of research and development institutes forming effi ciency production infrastructure. Focuses on the organizationalside of the issue as the comparative characteristics. It is proposed allocation of integraland differential approach to assessing the investment attractiveness of the industrial infrastructure of the enterprise. Consideredsectoral, regional, national and internationallevels of development of industrial infrastructure.

Research and Development on Coatings for Retaining Fission Product Iodine

Energy Technology Data Exchange (ETDEWEB)

Genco, J. M.; Berry, D. A.; Rosenberg, H. S.; Cremeans, G. E.; Morrison, D. L. [Battelle Memorial Institute, Columbus Laboratories, Columbus, OH (United States)

1968-12-15

It is well known that elemental iodine has the propensity for forming charge-transfer complexes with amines. These complexes are stable at ambient temperatures and retain much of this stability at elevated temperatures. Amines also react with methyl iodide and hydrogen iodide to form the quaternary ammonium salts and amine salts, respectively. These chemical properties of amines provide the basis for the development of retentive coatings for fission product iodine. Various amine-containing polymers were studied in steam-air environments at elevated temperatures using dilute quantities of tagged iodine. Both non-condensing and condensing steam conditions were investigated. Several of the polymers showed sorption rates and capacities that would be adequate for the chemical removal of accident-released fission-product iodine and were several times more effective than commercial protective coatings currently being used. The removal capabilities for amine polymers also could be enhanced by impregnating the reactant on a matrix material such as asbestos mat, presumably because the impregnation technique leads to enhanced surface area and porosity. The two most promising coating systems found were 1:10-phenanthroline impregnated upon asbestos and a three component composite film of the co-polymer of Genamid 2000 and Epon 828 as a reactive binder with 1,10-phenanthroline as a reactive filler. The use of a reactive coating as a passive safety system should reduce appreciably the airborne iodine half-life and the hazards associated with iodine release during a nuclear reactor accident. (author)

An integrated new product development framework - an application on green and low-carbon products

Science.gov (United States)

Lin, Chun-Yu; Lee, Amy H. I.; Kang, He-Yau

2015-03-01

Companies need to be innovative to survive in today's competitive market; thus, new product development (NPD) has become very important. This research constructs an integrated NPD framework for developing new products. In stage one, customer attributes (CAs) and engineering characteristics (ECs) for developing products are collected, and fuzzy interpretive structural modelling (FISM) is applied to understand the relationships among these critical factors. Based on quality function deployment (QFD), a house of quality is then built, and fuzzy analytic network process (FANP) is adopted to calculate the relative importance of ECs. In stage two, fuzzy failure mode and effects analysis (FFMEA) is applied to understand the potential failures of the ECs and to determine the importance of ECs with respect to risk control. In stage three, a goal programming (GP) model is constructed to consider the outcome from the FANP-QFD, FFMEA and other objectives, in order to select the most important ECs. Due to pollution and global warming, environmental protection has become an important topic. With both governments and consumers developing environmental consciousness, successful green and low-carbon NPD provides an important competitive advantage, enabling the survival or renewal of firms. The proposed framework is implemented in a panel manufacturing firm for designing a green and low-carbon product.

Using market research for product line development.

Science.gov (United States)

Bowie, B H; Kivney, N

1993-08-01

A marketing research study determined patient needs and wants in order to tailor services within a family maternity care unit. In addition, an educational program, implemented in an effort to change the behavior of the caregivers in the clinical area, is described.

Embracing the Importance of FAIR Research Products - Findable, Accessible, Interoperable, and Reusable

Science.gov (United States)

Stall, S.

2017-12-01

Integrity and transparency within research is solidified by a complete set of research products that are findable, accessible, interoperable, and reusable. In other words, they follow the FAIR Guidelines developed by FORCE11.org. Your datasets, images, video, software, scripts, models, physical samples, and other tools and technology are an integral part of the narrative you tell about your research. These research products increasingly are being captured through workflow tools and preserved and connected through persistent identifiers across multiple repositories that keep them safe. They help secure, with your publications, the supporting evidence and integrity of the scientific record. This is the direction that Earth and space science as well as other disciplines is moving. Within our community, some science domains are further along, and others are taking more measured steps. AGU as a publisher is working to support the full scientific record with peer reviewed publications. Working with our community and all the Earth and space science journals, AGU is developing new policies to encourage researchers to plan for proper data preservation and provide data citations along with their research submission and to encourage adoption of best practices throughout the research workflow and data life cycle. Providing incentives, community standards, and easy-to-use tools are some important factors for helping researchers embrace the FAIR Guidelines and support transparency and integrity.

An overview of research on technological and telecommunication development

Directory of Open Access Journals (Sweden)

Marina Budimir

2014-10-01

Full Text Available The scientific and professional research on technological and telecommunication development started in the second half of the 20th century as the use of new media and technologies began to cause structural business and social changes. A review of research published in the early 1980s revealed that the focus was mainly on the acceptance, usefulness and impact of new media and information technology on the information society, whereas research conducted at the turn of the century was mostly interdisciplinary and related to the effect of technological and telecommunication development on various scientific and professional fields. The focus of this paper is an overview of published research on information technology since the 1980s to date, as well as technological and telecommunication development in recent years based on the latest official published data. On the basis of previous research, it can be concluded that more attention needs to be directed to monitoring trends of ICT products and services in order to increase benefits and reduce the costs for active users, as well as improving infrastructure and providing information to attract passive users in order to reduce technological and telecommunication gap between developed, developing and underdeveloped countries.

Integrating climate change into agricultural research for development in Africa

Energy Technology Data Exchange (ETDEWEB)

Chambwera, Muyeye; Anderson, Simon

2011-09-15

African agriculture is already struggling to meet increasing demand for food. Climate change, which will alter agroecological conditions and looks set to arrest and decrease agricultural yields on the continent, will make it even harder to achieve food security. Boosting agricultural productivity in Africa, especially in the face of climate change, cannot be achieved without the benefits of cutting edge science. Advances in technology development and transfer, capacity building and policy research must be harnessed by developing and disseminating relevant strategies and technologies, and improving policy environments. The European Initiative for Agricultural Research for Development (EIARD), which facilitates and coordinates European policy and support for agricultural research for development, must integrate climate change into its activities and ensure that agricultural research for development and climate change adaptation are not disjointed. This demands a more strategic and coordinated approach from the initiative — one that reflects African realities, responds to African priorities for adaptation and development, and makes the best use of limited resources.

3D Machine Vision and Additive Manufacturing: Concurrent Product and Process Development

International Nuclear Information System (INIS)

Ilyas, Ismet P

2013-01-01

The manufacturing environment rapidly changes in turbulence fashion. Digital manufacturing (DM) plays a significant role and one of the key strategies in setting up vision and strategic planning toward the knowledge based manufacturing. An approach of combining 3D machine vision (3D-MV) and an Additive Manufacturing (AM) may finally be finding its niche in manufacturing. This paper briefly overviews the integration of the 3D machine vision and AM in concurrent product and process development, the challenges and opportunities, the implementation of the 3D-MV and AM at POLMAN Bandung in accelerating product design and process development, and discusses a direct deployment of this approach on a real case from our industrial partners that have placed this as one of the very important and strategic approach in research as well as product/prototype development. The strategic aspects and needs of this combination approach in research, design and development are main concerns of the presentation.

Consumer research in the early stages of new product development: A critical review of methods and techniques

NARCIS (Netherlands)

Kleef, van E.; Trijp, van J.C.M.; Luning, P.A.

2005-01-01

Incorporating the `voice of the consumer' in early stages of the new product development process has been identified as a critical success factor for new product development. Yet, this step is often ignored or poorly executed. This may be due to lack of familiarity on which methods are available,

Development of Value-Added Products from Residual Algae to Biomass

Energy Technology Data Exchange (ETDEWEB)

Behnke, Craig [Sapphire Energy, San Diego, CA (United States)

2016-02-29

DOE Award # EE0000393 was awarded to fund research into the development of beneficial uses of surplus algal biomass and the byproducts of biofuel production. At the time of award, Sapphire’s intended fuel production pathway was a fairly conventional extraction of lipids from biomass, resulting in a defatted residue which could be processed using anaerobic digestion. Over the lifetime of the award, we conducted extensive development work and arrived at the conclusion that anaerobic digestion presented significant technical challenges for this high-nitrogen, high-ash, and low carbon material. Over the same timeframe, Sapphire’s fuel production efforts came to focus on hydrothermal liquefaction. As a result of this technology focus, the residue from fuel production became unsuitable for either anaerobic digestion (or animal feed uses). Finally, we came to appreciate the economic opportunity that the defatted biomass could represent in the animal feed space, as well as understanding the impact of seasonal production on a biofuels extraction plant, and sought to develop uses for surplus biomass produced in excess of the fuel production unit’s capacity.

Product Configuration Systems - Implications for Product Innovation and Development

DEFF Research Database (Denmark)

Edwards, Kasper; Pedersen, Jørgen Lindgaard

2004-01-01

configurations. However, costs are but one parameter on which firms compete and firms must continually innovate new and develop existing products. This paper presents original empirical insights on implementation and use of product configuration systems in a number of Danish industrial firms. The paper discusses...... the organisational changes associated with PCS and how this affects product innovation and development. The paper begins by introducing product configuration systems, which are then placed in context to the firm as a process technology which coordinate different processes: product development, order acquisition......Product Configuration Systems (PCS) is a step in the direction of mass customization in the sense that PCS allows a firm to significantly lower the unit cost of configuration. Thus PCS is a valuable technology for lowering operating costs while retaining a high number of possible product...

An analysis of the impact of liquidity constraints on new financial product development: case of ZB bank

Directory of Open Access Journals (Sweden)

Newman Wadesango

2017-07-01

Full Text Available The study investigated the impact of liquidity constraints on development of new financial products in commercial banks. The descriptive research design was adopted and a case study of ZB Bank employed. A census sampling technique was adopted and questionnaires and interviews were self-administered by the researchers. Research outcomes proved that liquidity constraints are a major impediment to firm`s innovativeness. Financial project innovations are either not started, delayed or abandoned, but mostly the distribution and delivery of developed services for financial products are highly affected. The results of this study have contributed to existing literature in revealing that financial regulation tends to be another constraint for commercial banks discouraging product innovations. Rapid technological changes seem to fuel the need for new software and hardware for new product development thus necessitating the employment of a skilled workforce for new product development. Furthermore, customer demands are changing on a daily basis due to rapid changes in information technology thus making customer maintenance difficult for commercial banks. Based on the data gathered, the researchers concluded that there is a negative impact on new financial product development due to liquidity constraints. In such constrained times, we recommend that commercial banks should emphasize more the best technique suitable for successful new product development or invest their available funds in the development thereof.

Dutch research on environment and development in Sub-Saharan Africa

OpenAIRE

Haan, de, L.J.; Ton, P.

1994-01-01

This review of Dutch research on environmental issues in sub-Saharan Africa is based on an inventory of some 80 research programmes carried out in the Netherlands during the 1990s. An analysis of the research themes indicates that most of the research concentrates on the exploitation of natural resources, analysed either from the angle of production systems in conjunction with the development of sustainable technologies, or within the wider context of livelihood strategies, at both household ...

Ciência & Saúde Coletiva: scientific production analysis and collaborative research networks.

Science.gov (United States)

Conner, Norma; Provedel, Attilio; Maciel, Ethel Leonor Noia

2017-03-01

The purpose of this metric and descriptive study was to identify the most productive authors and their collaborative research networks from articles published in Ciência & Saúde Coletiva between, 2005, and 2014. Authors meeting the cutoff criteria of at least 10 articles were considered the most productive authors. VOSviewer and Network Workbench technologies were applied for visual representations of collaborative research networks involving the most productive authors in the period. Initial analysis recovered 2511 distinct articles, with 8920 total authors with an average of 3.55 authors per article. Author analysis revealed 6288 distinct authors, 24 of these authors were identified as the most productive. These 24 authors generated 287 articles with an average of 4.31 authors per article, and represented 8 separate collaborative partnerships, the largest of which had 14 authors, indicating a significant degree of collaboration among these authors. This analysis provides a visual representation of networks of knowledge development in public health and demonstrates the usefulness of VOSviewer and Network Workbench technologies in future research.

Information-communication technology impact on labor productivity growth of EU developing countries

Directory of Open Access Journals (Sweden)

Ljiljana Lovrić

2012-12-01

Full Text Available The aim of this study is to investigate the ICT impact on labor productivity growth of EU developing countries. Empirical studies of the role of ICT as one of the main determinants of productivity growth, for developing countries have produced disagreement. To help clear up the subject, this paper employs a Generalized Method of Moments (GMM through a dynamic panel data approach on the sample of 25 European developed and developing countries over the period of 2001-2010. The results indicate a positive and significant impact of ICT on labor productivity growth in developed and developing countries, but the terms of impact in developing countries rely on human capital, a contribution of a higher educational level, advanced research qualifications and development activity. Comparing to developed countries, the growth accounting approach indicate that developing countries have similar relative ICT contribution to labor productivity growth, but their average growth rate of labor productivity is 6.8 times higher. The main conclusion is that education, especially of higher levels, is the critical factor of productivity and growth of EU developing countries and that must be taken as development policy implication in these countries.

USU Alternative and Unconventional Energy Research and Development

Energy Technology Data Exchange (ETDEWEB)

Behunin, Robert [Utah State Univ., Logan, UT (United States); Wood, Byard [Utah State Univ., Logan, UT (United States); Heaslip, Kevin [Utah State Univ., Logan, UT (United States); Zane, Regan [Utah State Univ., Logan, UT (United States); Lyman, Seth [Utah State Univ., Logan, UT (United States); Simmons, Randy [Utah State Univ., Logan, UT (United States); Christensen, David [Utah State Univ., Logan, UT (United States)

2014-01-29

The purpose and rationale of this project has been to develop enduring research capabilities at Utah State University (USU) and the Utah State University Research Foundation (USURF) in a number of energy efficient and renewable energy areas including primarily a) algae energy systems, b) solar lighting, c) intuitive buildings, d) electric transportation, 3) unconventional energy environmental monitoring and beneficial reuse technologies (water and CO₂), f) wind energy profiling, and g) land use impacts. The long-term goal of this initiative has been to create high-wage jobs in Utah and a platform for sustained faculty and student engagement in energy research. The program’s objective has been to provide a balanced portfolio of R&D conducted by faculty, students, and permanent staff. This objective has been met. While some of the project’s tasks met with more success than others, as with any research project of this scope, overall the research has contributed valuable technical insight and broader understanding in key energy related areas. The algae energy systems research resulted in a highly productive workforce development enterprise as it graduated a large number of well prepared students entering alternative energy development fields and scholarship. Moreover, research in this area has demonstrated both the technological and economic limitations and tremendous potential of algae feedstock-based energy and co-products. Research conducted in electric transportation, specifically in both stationary and dynamic wireless inductive coupling charging technologies, has resulted in impactful advances. The project initiated the annual Conference on Electric Roads and Vehicles (http://www.cervconference.org/), which is growing and attracts more than 100 industry experts and scholars. As a direct result of the research, the USU/USURF spin-out startup, WAVE (Wireless Advanced Vehicle Electrification), continues work in wirelessly charged bus transit systems

The use of U.S. Geological Survey digital geospatial data products for science research

Science.gov (United States)

Varanka, Dalia E.; Deering, Carol; Caro, Holly

2012-01-01

The development of geographic information system (GIS) transformed the practice of geographic science research. The availability of low-cost, reliable data by the U.S. Geological Survey (USGS) supported the advance of GIS in the early stages of the transition to digital technology. To estimate the extent of the scientific use of USGS digital geospatial data products, a search of science literature databases yielded numbers of articles citing USGS products. Though this method requires careful consideration to avoid false positives, these citation numbers of three types of products (vector, land-use/land-cover, and elevation data) were graphed, and the frequency trends were examined. Trends indicated that the use of several, but not all, products increased with time. The use of some products declined and reasons for these declines are offered. To better understand how these data affected the design and outcomes of research projects, the study begins to build a context for the data by discussing digital cartographic research preceding the production of mass-produced products. The data distribution methods used various media for different system types and were supported by instructional material. The findings are an initial assessment of the affect of USGS products on GIS-enabled science research. A brief examination of the specific papers indicates that USGS data were used for science and GIS conceptual research, advanced education, and problem analysis and solution applications.

Integrating the results of user research into medical device development: insights from a case study.

Science.gov (United States)

Martin, Jennifer L; Barnett, Julie

2012-07-19

It is well established that considering users is an important aspect of medical device development. However it is also well established that there are numerous barriers to successfully conducting user research and integrating the results into product development. It is not sufficient to simply conduct user research, it must also be effectively integrated into product development. A case study of the development of a new medical imaging device was conducted to examine in detail how users were involved in a medical device development project. Two user research studies were conducted: a requirements elicitation interview study and an early prototype evaluation using contextual inquiry. A descriptive in situ approach was taken to investigate how these studies contributed to the product development process and how the results of this work influenced the development of the technology. Data was collected qualitatively through interviews with the development team, participant observation at development meetings and document analysis. The focus was on investigating the barriers that exist to prevent user data from being integrated into product development. A number of individual, organisational and system barriers were identified that functioned to prevent the results of the user research being fully integrated into development. The user and technological aspects of development were seen as separate work streams during development. The expectations of the developers were that user research would collect requirements for the appearance of the device, rather than challenge its fundamental concept. The manner that the user data was communicated to the development team was not effective in conveying the significance or breadth of the findings. There are a range of informal and formal organisational processes that can affect the uptake of user data during medical device development. Adopting formal decision making processes may assist manufacturers to take a more integrated and

Integrating the results of user research into medical device development: insights from a case study

Directory of Open Access Journals (Sweden)

Martin Jennifer L

2012-07-01

Full Text Available Abstract Background It is well established that considering users is an important aspect of medical device development. However it is also well established that there are numerous barriers to successfully conducting user research and integrating the results into product development. It is not sufficient to simply conduct user research, it must also be effectively integrated into product development. Methods A case study of the development of a new medical imaging device was conducted to examine in detail how users were involved in a medical device development project. Two user research studies were conducted: a requirements elicitation interview study and an early prototype evaluation using contextual inquiry. A descriptive in situ approach was taken to investigate how these studies contributed to the product development process and how the results of this work influenced the development of the technology. Data was collected qualitatively through interviews with the development team, participant observation at development meetings and document analysis. The focus was on investigating the barriers that exist to prevent user data from being integrated into product development. Results A number of individual, organisational and system barriers were identified that functioned to prevent the results of the user research being fully integrated into development. The user and technological aspects of development were seen as separate work streams during development. The expectations of the developers were that user research would collect requirements for the appearance of the device, rather than challenge its fundamental concept. The manner that the user data was communicated to the development team was not effective in conveying the significance or breadth of the findings. Conclusion There are a range of informal and formal organisational processes that can affect the uptake of user data during medical device development. Adopting formal decision

Building research capacity and productivity among advanced practice nurses: an evaluation of the Community of Practice model.

Science.gov (United States)

Gullick, Janice G; West, Sandra H

2016-03-01

The aim of this study was to evaluate Wenger's Community of Practice as a framework for building research capacity and productivity. While research productivity is an expected domain in influential models of advanced nursing practice, internationally it remains largely unmet. Establishment of nursing research capacity precedes productivity and consequently, there is a strong imperative to identify successful capacity-building models for nursing-focussed research in busy clinical environments. Prospective, longitudinal, qualitative descriptive design was used in this study. Bruyn's participant observation framed evaluation of a Community of Practice comprising 25 advanced practice nurses. Data from focus groups, education evaluations, blog/email transcripts and field observations, collected between 2007 and 2014, were analysed using a qualitative descriptive method. The Community of Practice model invited differing levels of participation, allowed for evolution of the research community and created a rhythm of research-related interactions and enduring research relationships. Participants described the value of research for their patients and families and the significance of the developing research culture in providing richness to their practice and visibility of their work to multidisciplinary colleagues. Extensive examples of research dissemination and enrolment in doctoral programmes further confirmed this value. A Community of Practice framework is a powerful model enabling research capacity and productivity evidenced by publication. In developing a solid foundation for a nursing research culture, it should be recognized that research skills, confidence and growth develop over an extended period of time and success depends on skilled coordination and leadership. © 2015 John Wiley & Sons Ltd.

Development of SFR Research and Integration Management System (S-RIMS)

International Nuclear Information System (INIS)

Cho, Chung Ho; Chang, Jin Wook; Kim, Young Gyun; Kim, Yeong Il

2011-01-01

Up to the present, the management of research and development (R and D) for a sodium cooled fast reactor (SFR) could be individually performed on each project without an organic relationship. However, a more systemic and effective integrated management of a project is required because the research and development environment is currently changing. Thus, we developed a Research and Integration Management System for SFR (S-RIMS) based on the enterprise project management (EPM) solution. The functional goals of the S-RIMS are as follows: 1. Provide data that show the progress and status of a project 2. Manage the design process and R and D products 3. Share the consistent design data between sub-projects

Improving new product development (NPD process by analyzing failure cases

Directory of Open Access Journals (Sweden)

Yeon-Hak Kim

2017-01-01

Full Text Available Purpose - The purpose of this study is to develop an appropriate new product development (NPD process of Company “T”, a medium-sized firm, by analyzing the existing NPD process and failure cases of the Company. Design/methodology/approach - The proposed research framework is as follows: first, prospective studies of the NPD process are performed using the existing literature and preliminary references; second, comparative analysis between the current processes and a NPD process is performed; third, phase-based evaluations upon failed product cases are conducted with a NPD process so as to identify the abridged steps and root-causes of failures; finally, renewed priorities are set forth by utilizing the analytic hierarchy process analysis and questionnaire analysis upon the above identified causes of failures. Findings - The resulting accomplishments include the establishment of NPD processes that resonates with the current states of Company “T”, which, in turn, ensures the increase of efficiency, the decrease in development duration and the strategy of capacity-concentration and priority-selection. Originality/value - As Company “T”’s development process is outdated and products are developed without adequate market information research and feasibility analysis, the percentage of failed development project is as high as 87 per cent. Thus, this study aims to develop an appropriate NPD process of Company “T” by analyzing the existing NPD process and failure cases of the Company.