77 FR 64598 - Joint Biomedical Laboratory Research and Development and Clinical Science Research and...

Science.gov (United States)

2012-10-22

... DEPARTMENT OF VETERANS AFFAIRS Joint Biomedical Laboratory Research and Development and Clinical...) that the panels of the Joint Biomedical Laboratory Research and Development and Clinical Science... areas of biomedical, behavioral and clinical science research. The panel meetings will be open to the...

Research on decommissioning of nuclear facilities (Joint research)

International Nuclear Information System (INIS)

Shibahara, Yuji; Morishita, Yoshitsugu; Ishigami, Tsutomu; Yanagihara, Satoshi; Arita, Yuji

2011-07-01

To implement a decommissioning project reasonably, it is necessary and important to beforehand evaluate project management data as well as to select an optimum dismantling scenario among various scenarios postulated. Little study on the subject of selecting an optimum scenario has been carried out, and it is one of the most important subjects in terms of decision making. In FY 2009, Japan Atomic Energy Agency and University of Fukui launched the joint research of a decision making method which is important to determine a decommissioning plan. The purpose of the research is to construct a methodology for selecting an optimum dismantling scenario among various scenarios postulated based on calculated results of project management data for FUGEN. Project management data for several dismantling scenarios postulated at FUGEN were evaluated based on actual dismantling work for feed water heater at FUGEN, and an optimum scenario was discussed using the SMART, one of Multi-Criteria Decision Analysis Method. This report describes the results of the joint research in FY 2009. (author)

15 CFR 295.23 - Dissolution of joint research and development ventures.

Science.gov (United States)

2010-01-01

... Development Ventures § 295.23 Dissolution of joint research and development ventures. Upon dissolution of any joint research and development venture receiving funds under these procedures or at a time otherwise... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Dissolution of joint research and...

Joint Global Change Research Institute (JGCRI)

Data.gov (United States)

Federal Laboratory Consortium — The Joint Global Change Research Institute (JGCRI) is dedicated to understanding the problems of global climate change and their potential solutions. The Institute...

DOE-EERC jointly sponsored research program

Energy Technology Data Exchange (ETDEWEB)

Hendrikson, J.G.; Sondreal, E.A.

1999-09-01

U.S. Department of Energy (DOE) Cooperative Agreement DE-FC21-93MC30098 funded through the Office of Fossil Energy and administered at the Federal Energy Technology Center (FETC) supported the performance of a Jointly Sponsored Research Program (JSRP) at the Energy and Environmental Research Center (EERC) with a minimum 50% nonfederal cost share to assist industry in commercializing and effectively applying efficient, nonpolluting energy technologies that can compete effectively in meeting market demands for clean fuels, chemical feedstocks, and electricity in the 21st century. The objective of the JSRP was to advance the deployment of advanced technologies for improving energy efficiency and environmental performance through jointly sponsored research on topics that would not be adequately addressed by the private sector alone. Examples of such topics include the barriers to hot-gas cleaning impeding the deployment of high-efficiency power systems and the search for practical means for sequestering CO{sub 2} generated by fossil fuel combustion. The selection of particular research projects was guided by a combination of DOE priorities and market needs, as provided by the requirement for joint venture funding approved both by DOE and the private sector sponsor. The research addressed many different energy resource and related environmental problems, with emphasis directed toward the EERC's historic lead mission in low-rank coals (LRCs), which represent approximately half of the U.S. coal resources in the conterminous states, much larger potential resources in Alaska, and a major part of the energy base in the former U.S.S.R., East Central Europe, and the Pacific Rim. The Base and JSRP agreements were tailored to the growing awareness of critical environmental issues, including water supply and quality, air toxics (e.g., mercury), fine respirable particulate matter (PM{sub 2.5}), and the goal of zero net CO{sub 2} emissions.

Periprosthetic Joint Infections: Clinical and Bench Research

Directory of Open Access Journals (Sweden)

Laurence Legout

2013-01-01

Full Text Available Prosthetic joint infection is a devastating complication with high morbidity and substantial cost. The incidence is low but probably underestimated. Despite a significant basic and clinical research in this field, many questions concerning the definition of prosthetic infection as well the diagnosis and the management of these infections remained unanswered. We review the current literature about the new diagnostic methods, the management and the prevention of prosthetic joint infections.

The JAERI and Universities joint project research reports on the 4th joint research project between JAERI and Universities on backend chemistry

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-02-01

In the Joint Research Project between JAERI and Universities on Backend Chemistry, the 4th-term researches of it were performed on sixteen themes from April of 1999 to March of 2001 under the four categories, i.e. Nuclear-chemistry and physical-chemistry properties of actinides', 'Solid state chemistry and nuclear fuel engineering of actinides', 'Solution chemistry and technologies for separation and analysis of actinides' and Treatment of radioactive waste and environmental chemistry'. The present report compiled the papers contributed to the Joint Research Project. (author)

Jointly Sponsored Research Program

Energy Technology Data Exchange (ETDEWEB)

Everett A. Sondreal; John G. Hendrikson; Thomas A. Erickson

2009-03-31

U.S. Department of Energy (DOE) Cooperative Agreement DE-FC26-98FT40321 funded through the Office of Fossil Energy and administered at the National Energy Technology Laboratory (NETL) supported the performance of a Jointly Sponsored Research Program (JSRP) at the Energy & Environmental Research Center (EERC) with a minimum 50% nonfederal cost share to assist industry in commercializing and effectively applying highly efficient, nonpolluting energy systems that meet the nation's requirements for clean fuels, chemicals, and electricity in the 21st century. The EERC in partnership with its nonfederal partners jointly performed 131 JSRP projects for which the total DOE cost share was $22,716,634 (38%) and the nonfederal share was $36,776,573 (62%). Summaries of these projects are presented in this report for six program areas: (1) resource characterization and waste management, (2) air quality assessment and control, (3) advanced power systems, (4) advanced fuel forms, (5) value-added coproducts, and (6) advanced materials. The work performed under this agreement addressed DOE goals for reductions in CO{sub 2} emissions through efficiency, capture, and sequestration; near-zero emissions from highly efficient coal-fired power plants; environmental control capabilities for SO{sub 2}, NO{sub x}, fine respirable particulate (PM{sub 2.5}), and mercury; alternative transportation fuels including liquid synfuels and hydrogen; and synergistic integration of fossil and renewable resources.

Application of computer-assisted imaging technology in human musculoskeletal joint research

Directory of Open Access Journals (Sweden)

Xudong Liu

2014-01-01

Full Text Available Computer-assisted imaging analysis technology has been widely used in the musculoskeletal joint biomechanics research in recent years. Imaging techniques can accurately reconstruct the anatomic features of the target joint and reproduce its in vivo motion characters. The data has greatly improved our understanding of normal joint function, joint injury mechanism, and surgical treatment, and can provide foundations for using reverse-engineering methods to develop biomimetic artificial joints. In this paper, we systematically reviewed the investigation of in vivo kinematics of the human knee, shoulder, lumber spine, and ankle using advanced imaging technologies, especially those using a dual fluoroscopic imaging system (DFIS. We also briefly discuss future development of imaging analysis technology in musculoskeletal joint research.

The strength research of the adhesive joints of sheet structures ...

African Journals Online (AJOL)

The research results of stress-strained condition of constructional sheet materials are given in the article. The strength dependence on type, configuration and sizes of adhesive joints is analyzed. The research of the strength dependence was made on the samples from bakelite plywood with the main types of adhesive joints ...

Electrical Properties of PPy-Coated Conductive Fabrics for Human Joint Motion Monitoring

Directory of Open Access Journals (Sweden)

Jiyong Hu

2016-03-01

Full Text Available Body motion signals indicate several pathological features of the human body, and a wearable human motion monitoring system can respond to human joint motion signal in real time, thereby enabling the prevention and treatment of some diseases. Because conductive fabrics can be well integrated with the garment, they are ideal as a sensing element of wearable human motion monitoring systems. This study prepared polypyrrole conductive fabric by in situ polymerization, and the anisotropic property of the conductive fabric resistance, resistance–strain relationship, and the relationship between resistance and the human knee and elbow movements are discussed preliminarily.

Responsible conduct of research

CERN Document Server

Shamoo, Adil E

2015-01-01

Since the early 2000s, the field of Responsible Conduct of Research has become widely recognized as essential to scientific education, investigation, and training. At present, research institutions with public funding are expected to have some minimal training and education in RCR for their graduate students, fellows and trainees. These institutions also are expected to have a system in place for investigating and reporting misconduct in research or violations of regulations in research with human subjects, or in their applications to federal agencies for funding. Public scrutiny of the conduct of scientific researchers remains high. Media reports of misconduct scandals, biased research, violations of human research ethics rules, and moral controversies in research occur on a weekly basis. Since the 2009 publication of the 2nd edition of Shamoo and Resnik's Responsible Conduct of Research, there has been a vast expansion in the information, knowledge, methods, and diagnosis of problems related to RCR and the ...

Research of the Resistance of Contact Welding Joint of R65 Type Rail

Directory of Open Access Journals (Sweden)

Kęstutis Dauskurdis

2015-03-01

Full Text Available In the article the R65 type rail joints that were welded by resistance welding are analysed. Survey methodology of the research consists of the following parts: visual inspection of welded joint, ultrasonic rail inspection, hardness test of upper part of the rail, fusion area research, the measurement hardness test of heat-softened area, the measurement microhardness test, microstructure research of the welded joint, impact strength experiments, chemical analysis of welded joint, wheel-rail interaction research using the finite element method (FEM. The results of the research are analysed and the quality of weld is evaluated. The conclusion is based on the results of this research.

R&D returns, market structure and research joint ventures

DEFF Research Database (Denmark)

Amir, Rabah

2000-01-01

(one firm endogenously exiting). Two research joint venture schemes and the noncooperative solution are compared. Due to built-in symmetry, a joint lab does not always lead to the best performance. Overall, our findings differ quite substantially from those based on strongly decreasing R&D returns...

Educational Research Centre of the Joint Institute for Nuclear Research and students training on the 'Medical Physics' speciality

International Nuclear Information System (INIS)

Ivanova, S.P.; )

2005-01-01

The Educational Research Centre (ERC) of the Joint Institute for Nuclear Research is the place of joint activity of the JINR, Moscow State University (MSU) and Moscow Engineering Physical Institute (MEFI) on students training by a broadened circle of specialities with introduction of new educational forms. Active application of medical accelerator beams of the JINR Laboratory of Nuclear Beams becomes a reason for implementation of a new training chair in the MEFI on the JINR base - the Physical methods in applied studies in the medicine chair. For the 'medical physics' trend development in 2003 the workshop on discussion both curricula and teaching methodic by the speciality was held. One the Educational Research Centre main activities is both organization and conducting an international scientific schools and training courses. The International student School 'Nuclear-Physical Methods and Accelerators is the most popular and traditional. The principal aim of these schools and courses is familiarization of students and postgraduates with last achievement and and contemporary problems of applied medical physics. The school audience is a students and postgraduates of ERC, MSU, MEFI, and an institutes of Poland, Hungary, Slovakia, France, Czech and Bulgaria

Proceedings of second JAERI-JNC joint conference on nuclear safety research

International Nuclear Information System (INIS)

Sugimoto, Jun; Anoda, Yoshinari; Araya, Fumimasa; Yamaguchi, Toshio

2004-08-01

The second JAERI-JNC Joint Conference on Nuclear Safety Research was held on February 6, 2004 in Tokyo for those who are relevant to nuclear industries and regulatory organizations, and general public. The nuclear safety research has been conducted in both institutes according to the Five-Year Program for Nuclear Safety Research established periodically by the Nuclear Safety Commission (NSC) and needs from the regulatory organizations. The objectives of the conference are to present its recent results and to collect views and opinions from the participants for its future program through the discussion after each presentation and panel discussion on how to conduct efficiently the nuclear safety in the New Organization. A total of 259 people participated in the conference mainly from the nuclear industries and regulatory organizations and the number was much larger than that in the last conference of 188. The conference consisted of presentations on the safety research results, a special lecture and a panel discussion. First, the overview of safety research results was presented from each institute. Then, the results in the field of nuclear installations, environmental radioactivity and radioactive waste were presented from each institute. Then, Dr. Higashi, the Nuclear Safety Commissioner, made a special lecture on the radiation protection from the high-level radioactive waste disposal. Finally, a panel discussion was conducted with the title of ''how to conduct efficiently the nuclear safety research in the New Organization'' chaired by Prof. Kimura, the chairperson of Standing Committee on Nuclear Safety Research under the NSC. The panelists from the regulatory organizations, nuclear industry, JAERI and JNC discussed the subject together with the participants on the floor. The panelists not from JAERI and JNC expressed their views and opinions on how to conduct efficiently the nuclear safety research in the New Organization that were valuable inputs for developing

Maternal warmth and directiveness jointly moderate the etiology of childhood conduct problems.

Science.gov (United States)

Alexandra Burt, S; Klahr, Ashlea M; Neale, Michael C; Klump, Kelly L

2013-10-01

Prior studies exploring gene-environment interactions (GxE) in the development of youth conduct problems (CP) have focused almost exclusively on single-risk experiences, despite research indicating that the presence of other risk factors and or the absence of protective factors can accentuate the influence of a given risk factor on CP. The goal of the current study was to fill this gap in the literature, evaluating whether risky and protective aspects of parenting might combine to jointly moderate the etiology of CP. The sample consisted of 500 child twin pairs from the Michigan State University Twin Registry (MSUTR). Child CP was assessed using multiple informant reports. Maternal warmth and directiveness were assessed via videotaped dyadic interactions between mothers and each of their twins. Biometric GxE analyses revealed that directiveness and warmth did appear to jointly moderate the etiology of CP. In particular, shared environmental influences were accentuated by colder, less directive or 'less engaged' mothering, whereas genetic influences were strongest when the child was experiencing warmer, more directive or 'more authoritative' mothering. Such findings serve to highlight the synergistic effects of risky and protective experiences on child outcomes. They also provide additional empirical support for the bioecological form of GxE, which postulates that, in some cases, genetic influences may be most strongly expressed in the presence of low-risk environments. © 2013 The Authors. Journal of Child Psychology and Psychiatry © 2013 Association for Child and Adolescent Mental Health.

Report of results of joint research using facilities in Japan Atomic Energy Research Institute in fiscal year 1987

International Nuclear Information System (INIS)

1988-06-01

The total themes of the joint research in fiscal year 1987 were 127. These are shown being classified into the general joint research in Tokai and Takasaki, neutron diffraction research and cooperative research. The general joint research is the standard utilization form using research reactors JRR-2 and JRR-4, Co-60 gamma irradiation facilities in Tokai and Takasaki, an electron beam irradiation facility in Takasaki, an electron beam linear accelator and hot laboratories, which are opened for common utilization by Japan Atomic Energy Research Institute. The cooperative research is carried out by concluding research cooperation contracts between the researchers of universities and JAERI. In the general joint research, radioactivation analysis, radiation chemistry, irradiation effect, neutron diffraction and so on are the main themes, and in the cooperative research, reactor technology, reactor materials, nuclear physics measurement and others are the main themes. The total number of visitors was 2629 man-day, and decreased due to the stop of JRR-2. Also other activities are reported. The abstracts of respective reports are collected in this book. (Kako, I.)

Jointly Sponsored Research Program Energy Related Research

Energy Technology Data Exchange (ETDEWEB)

Western Research Institute

2009-03-31

Cooperative Agreement, DE-FC26-98FT40323, Jointly Sponsored Research (JSR) Program at Western Research Institute (WRI) began in 1998. Over the course of the Program, a total of seventy-seven tasks were proposed utilizing a total of $23,202,579 in USDOE funds. Against this funding, cosponsors committed $26,557,649 in private funds to produce a program valued at $49,760,228. The goal of the Jointly Sponsored Research Program was to develop or assist in the development of innovative technology solutions that will: (1) Increase the production of United States energy resources - coal, natural gas, oil, and renewable energy resources; (2) Enhance the competitiveness of United States energy technologies in international markets and assist in technology transfer; (3) Reduce the nation's dependence on foreign energy supplies and strengthen both the United States and regional economies; and (4) Minimize environmental impacts of energy production and utilization. Under the JSR Program, energy-related tasks emphasized enhanced oil recovery, heavy oil upgrading and characterization, coal beneficiation and upgrading, coal combustion systems development including oxy-combustion, emissions monitoring and abatement, coal gasification technologies including gas clean-up and conditioning, hydrogen and liquid fuels production, coal-bed methane recovery, and the development of technologies for the utilization of renewable energy resources. Environmental-related activities emphasized cleaning contaminated soils and waters, processing of oily wastes, mitigating acid mine drainage, and demonstrating uses for solid waste from clean coal technologies, and other advanced coal-based systems. Technology enhancement activities included resource characterization studies, development of improved methods, monitors and sensors. In general the goals of the tasks proposed were to enhance competitiveness of U.S. technology, increase production of domestic resources, and reduce environmental

Stochastic joint inversion of hydrogeophysical data for salt tracer test monitoring and hydraulic conductivity imaging

Science.gov (United States)

Jardani, A.; Revil, A.; Dupont, J. P.

2013-02-01

The assessment of hydraulic conductivity of heterogeneous aquifers is a difficult task using traditional hydrogeological methods (e.g., steady state or transient pumping tests) due to their low spatial resolution. Geophysical measurements performed at the ground surface and in boreholes provide additional information for increasing the resolution and accuracy of the inverted hydraulic conductivity field. We used a stochastic joint inversion of Direct Current (DC) resistivity and self-potential (SP) data plus in situ measurement of the salinity in a downstream well during a synthetic salt tracer experiment to reconstruct the hydraulic conductivity field between two wells. The pilot point parameterization was used to avoid over-parameterization of the inverse problem. Bounds on the model parameters were used to promote a consistent Markov chain Monte Carlo sampling of the model parameters. To evaluate the effectiveness of the joint inversion process, we compared eight cases in which the geophysical data are coupled or not to the in situ sampling of the salinity to map the hydraulic conductivity. We first tested the effectiveness of the inversion of each type of data alone (concentration sampling, self-potential, and DC resistivity), and then we combined the data two by two. We finally combined all the data together to show the value of each type of geophysical data in the joint inversion process because of their different sensitivity map. We also investigated a case in which the data were contaminated with noise and the variogram unknown and inverted stochastically. The results of the inversion revealed that incorporating the self-potential data improves the estimate of hydraulic conductivity field especially when the self-potential data were combined to the salt concentration measurement in the second well or to the time-lapse cross-well electrical resistivity data. Various tests were also performed to quantify the uncertainty in the inverted hydraulic conductivity

Integrating Quantitative and Qualitative Results in Health Science Mixed Methods Research Through Joint Displays.

Science.gov (United States)

Guetterman, Timothy C; Fetters, Michael D; Creswell, John W

2015-11-01

Mixed methods research is becoming an important methodology to investigate complex health-related topics, yet the meaningful integration of qualitative and quantitative data remains elusive and needs further development. A promising innovation to facilitate integration is the use of visual joint displays that bring data together visually to draw out new insights. The purpose of this study was to identify exemplar joint displays by analyzing the various types of joint displays being used in published articles. We searched for empirical articles that included joint displays in 3 journals that publish state-of-the-art mixed methods research. We analyzed each of 19 identified joint displays to extract the type of display, mixed methods design, purpose, rationale, qualitative and quantitative data sources, integration approaches, and analytic strategies. Our analysis focused on what each display communicated and its representation of mixed methods analysis. The most prevalent types of joint displays were statistics-by-themes and side-by-side comparisons. Innovative joint displays connected findings to theoretical frameworks or recommendations. Researchers used joint displays for convergent, explanatory sequential, exploratory sequential, and intervention designs. We identified exemplars for each of these designs by analyzing the inferences gained through using the joint display. Exemplars represented mixed methods integration, presented integrated results, and yielded new insights. Joint displays appear to provide a structure to discuss the integrated analysis and assist both researchers and readers in understanding how mixed methods provides new insights. We encourage researchers to use joint displays to integrate and represent mixed methods analysis and discuss their value. © 2015 Annals of Family Medicine, Inc.

Integrating Quantitative and Qualitative Results in Health Science Mixed Methods Research Through Joint Displays

Science.gov (United States)

Guetterman, Timothy C.; Fetters, Michael D.; Creswell, John W.

2015-01-01

PURPOSE Mixed methods research is becoming an important methodology to investigate complex health-related topics, yet the meaningful integration of qualitative and quantitative data remains elusive and needs further development. A promising innovation to facilitate integration is the use of visual joint displays that bring data together visually to draw out new insights. The purpose of this study was to identify exemplar joint displays by analyzing the various types of joint displays being used in published articles. METHODS We searched for empirical articles that included joint displays in 3 journals that publish state-of-the-art mixed methods research. We analyzed each of 19 identified joint displays to extract the type of display, mixed methods design, purpose, rationale, qualitative and quantitative data sources, integration approaches, and analytic strategies. Our analysis focused on what each display communicated and its representation of mixed methods analysis. RESULTS The most prevalent types of joint displays were statistics-by-themes and side-by-side comparisons. Innovative joint displays connected findings to theoretical frameworks or recommendations. Researchers used joint displays for convergent, explanatory sequential, exploratory sequential, and intervention designs. We identified exemplars for each of these designs by analyzing the inferences gained through using the joint display. Exemplars represented mixed methods integration, presented integrated results, and yielded new insights. CONCLUSIONS Joint displays appear to provide a structure to discuss the integrated analysis and assist both researchers and readers in understanding how mixed methods provides new insights. We encourage researchers to use joint displays to integrate and represent mixed methods analysis and discuss their value. PMID:26553895

A non-conventional technique for evaluating welded joints based on the electrical conductivity

Energy Technology Data Exchange (ETDEWEB)

Santos, T.G.; Sorger, G., E-mail: telmo.santos@fct.unl.pt, E-mail: lgs18243@campus.fct.unl.pt [Universidade Nova de Lisboa, UNIDEMI, Departamento de Engenharia Mecanica e Industrial, Faculdade de Ciencias e Tecnologia, Caparica (Portugal); Vilaca, P., E-mail: pedro.vilaca@aalto.fi [Aalto Univ., Dept. of Engineering Design and Production, School of Engineering, Aalto (Finland); Miranda, R., E-mail: rmiranda@fct.unl.pt [Universidade Nova de Lisboa, UNIDEMI, Departamento de Engenharia Mecanica e Industrial, Faculdade de Ciencias e Tecnologia, Caparica (Portugal)

2015-01-15

Recent studies showed that electrical conductivity is a valuable technique to identify the different zones of solid-state welded joints with a good correlation with the microstructure and hardness. This is a relevant result since this technique is fast and, in some cases, non destructive, The concept was applied to other welding processes such as the ones involving fusion to a wide range of materials, For this, a comprehensive study was performed using friction stir welding, tungsten inert gas (TlG) and gas metal arc (MAG) welding processes in either bead on plate or butt joints in: carbon steel, magnesium and titanium, Eddy current nondestructive testing (NDT) was used to measure the electrical conductivity at different depths in transverse sections of the processed materials. The profiles were compared to the hardness profiles in the same sections. As a result, a correlation was observed in most materials welded by solid state and by fusion processes. The variation of the electrical conductivity closely follows that measured in the hardness. Another interesting conclusion is that, even for fusion welding of carbon steels, the technique has potential to complement the hardness measurements and microstructural observations, allowing the identification of the distinct zones of welds in materials commonly used in industry. (author)

RESEARCH ON THE HOMOGENEITY OF TEMPERATURES IN JOINT'S AREA BY VULCANIZING THE CONVEYOR BELTS

Directory of Open Access Journals (Sweden)

Dan DOBROTA

2016-05-01

Full Text Available The researches presented in this paper have followed the analysis of the heat transfer mode during joining through vulcanization of the conveyor belts and also the homogeneity of the temperatures in the joint area. The researches were made under laboratory conditions taking into account the process of joining of two conveyor belts of the type ST 2000 with an installation of the type DSLQ. Temperature measurement was conducted using an EX42570 pyrometer in four distinct points corresponding to each end of the two conveyor belts on the both sides of the band, namely the active and inactive side.

77 FR 26069 - Joint Biomedical Laboratory Research and Development and Clinical Science Research and...

Science.gov (United States)

2012-05-02

... DEPARTMENT OF VETERANS AFFAIRS Joint Biomedical Laboratory Research and Development and Clinical Science Research and Development Services Scientific Merit Review Board, Notice of Meeting Amendment The... Development and Clinical Science Research and Development Services Scientific Merit Review Board have changed...

Future Research Opportunities in Peri-Prosthetic Joint Infection Prevention.

Science.gov (United States)

Berbari, Elie; Segreti, John; Parvizi, Javad; Berríos-Torres, Sandra I

Peri-prosthetic joint infection (PJI) is a serious complication of prosthetic joint arthroplasty. A better understanding and reversal of modifiable risk factors may lead to a reduction in the incidence of incisional (superficial and deep) and organ/space (e.g., PJI) surgical site infections (SSI). Recently, the Centers for Disease Control and Prevention (CDC) and the Healthcare Infection Control Practices Advisory Committee (HICPAC) published the Guideline for Prevention of Surgical Site Infection. This targeted update applies evidence-based methodology in drafting recommendations for potential strategies to reduce the risk of SSI both across surgical procedures and specifically in prosthetic joint arthroplasty. A panel of PJI content experts identified nine PJI prevention research opportunities based on both evidence gaps identified through the guideline development process (transfusion, immunosuppressive therapy, anticoagulation, orthopedic space suit, and biofilm) and expert opinion (anesthesia, operative room environment, glycemic control, and Staphylococcus aureus nasal screening and decolonization. This article offers a road map for PJI prevention research.

Proceedings of third JAERI-JNC joint conference on nuclear safety research

International Nuclear Information System (INIS)

Anoda, Yoshinari; Oikawa, Tetsukuni; Araya, Fumimasa; Suzuki, Tsugio

2006-03-01

The present report is the proceedings of the third JAERI-JNC joint conference on nuclear safety research held on July 29, 2005 in Tokyo before integration of JAERI and JNC to JAEA. The conference was held for those who are relevant to nuclear industries and regulatory organizations, and general public. The nuclear safety research has been conducted in both institutes according to the Five-Year Program for Nuclear Safety Research established periodically by the Nuclear Safety Commission (NSC) and needs from the regulatory organizations. The objectives of the conference are to present its recent results and to collect views and opinions from the participants for its future program through the discussion after each presentation and panel discussion on how to conduct efficiently the nuclear safety research in the new organization. A total of 234 people participated in the conference mainly from the nuclear industries and regulatory organizations. The conference consisted of presentations on the safety research results, a special lecture and a panel discussion. First, the overview of safety research results was presented from each institute. Then, the results in the field of nuclear installations, environmental radioactivity and radioactive waste were presented from each institute. Then, Dr. Suzuki, deputy chairperson of NSC, made a special lecture on recent trends in nuclear safety regulation and expectation for the new organization. Finally, a panel discussion was conducted with the title of 'how to conduct efficiently the nuclear safety research in the new organization' chaired by Prof. Kimura, the chairperson of Standing Committee on Nuclear Safety Research under the NSC. The panelists from JAERI and JNC presented and discussed the subject together with the participants on the floor. Through vigorous exchange of views in the panel discussion and descriptions on the questionnaires, it was obviously expressed that expectation to the safety research of the new

Report on the project on the researcher dispatch type international joint research survey. International joint research for creation of new industries; Kenkyusha hakengata kokusai kyodo kenkyu chosa jigyo. Shinki sangyo soshutsu kokusai kyodo kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

For the purpose of digging up themes of the joint research which develop the R and D in the industrial field in Japan to a new stage, researchers were dispatched to the world representing research institutes to make the research study. As to the survey of the trend of bio-informatics research, visits for survey were paid by 8 researchers to 19 research institutes in the U.S., Australia, France and Germany, and survey was made of the state of new researches such as the genetic network analysis by DNA chip data. Relating to the survey of the trend of the plan for ape genomic DNA sequence, visits for survey were paid by 6 researchers to 12 research institutes in Japan, Germany, France and the U.K. Concerning the research survey with aim of developing the selective reversible expression technology of target genes, researchers were dispatched to St. Jude Children's Research Hospital in the U.S. to conduct the following: construction of basic expression vectors, functional evaluation using cultured cells, making of the transgenic mice to which medicine dependent and cell peculiar expression control genes were introduced, analytical study of the situation of expression control, etc. (NEDO)

Report of the research results with joint-use facilities in fiscal year 1977

International Nuclear Information System (INIS)

1978-01-01

In the Nuclear Engineering Research Laboratory, the University of Tokyo, fast neutron source reactor 'Yayoi', linac and fusion-reactor blanket facility are jointly used by educational institutions. Research results from the joint uses of the facilities in fiscal 1977 are presented in individual summaries: (on-pile) irradiation, reactor physics and engineering, etc., (off-pile) equipment and component techniques, etc., (linac) operation, etc., with these joint uses, unique works are intended in resonable way. (Mori, K.)

Optimum conductive fabric sensor sites for evaluating the status of knee joint movements using bio-impedance

Directory of Open Access Journals (Sweden)

Kim Jinkwon

2011-06-01

Full Text Available Abstract Background There have been many studies that utilize the bio-impedance measurement method to analyze the movements of the upper and lower limbs. A fixed electrical current flows into the limbs through four standard disposable electrodes in this method. The current flows in the muscles and blood vessels, which have relatively low resistivity levels in the human body. This method is used to measure bio-impedance changes following volume changes of muscles and blood vessels around a knee joint. The result of the bio-impedance changes is used to evaluate the movements. However, the method using the standard disposable electrodes has a restriction related to its low bio-impedance changes: the standard disposable electrodes are only able to measure bio-impedance from a limited part of a muscle. Moreover, it is impossible to use continuously, as the electrodes are designed to be disposable. This paper describes a conductive fabric sensor (CFS using a bio-impedance measurement method and determines the optimum configuration of the sensor for estimating knee joint movements. Methods The upper side of subjects' lower limbs was divided into two areas and the lower side of subjects' lower limbs was divided into three areas. The spots were matched and 6 pairs were selected. Subjects were composed of 15 males (age: 30.7 ± 5.3, weight: 69.8 ± 4.2 kg, and height: 173.5 ± 2.8 cm with no known problems with their knee joints. Bio-impedance changes according to knee joint flexion/extension assessments were calculated and compared with bio-impedance changes by an ankle joint flexion/extension test (SNR I and a hip joint flexion/extension test (SNR II. Results The bio-impedance changes of the knee joint flexion/extension assessment were 35.4 ± 20.0 Ω on the (1, 5 pair. SNR I was 3.8 ± 8.4 and SNR II was 6.6 ± 7.9 on the (1, 5 pair. Conclusions The optimum conductive fabric sensor configuration for evaluating knee joint movements were represented by

Joint Research on Scatterometry and AFM Wafer Metrology

NARCIS (Netherlands)

Bodermann, B.; Buhr, E.; Danzebrink, H.U.; Bär, M.; Scholze, F.; Krumrey, M.; Wurm, M.; Klapetek, P.; Hansen, P.E.; Korpelainen, V.; Van Veghel, M.; Yacoot, A.; Siitonen, S.; El Gawhary, O.; Burger, S.; Saastamoinen, T.

2011-01-01

Supported by the European Commission and EURAMET, a consortium of 10 participants from national metrology institutes, universities and companies has started a joint research project with the aim of overcoming current challenges in optical scatterometry for traceable linewidth metrology. Both

Proceedings of JAERI-JNC joint conference on nuclear safety research. March 7, 2003, Tokyo

International Nuclear Information System (INIS)

Sugimoto, Jun; Anoda, Yoshinari; Araya, Fumimasa; Yamaguchi, Toshio

2003-08-01

The JAERI-JNC Joint Conference on Nuclear Safety Research was held on March 7, 2003 in Tokyo with 188 participants, ahead of planned unification of JAERI and JNC in 2005. The objectives of the conference are to present recent results of safety research conducted in both institutes in accordance with the Five-Year Safety Research Plan by the Nuclear Safety Commission (NSC), and to reflect suggestions from the participants for future research program. Prof. Matsubara, Vice Chairperson of NSC, first presented a special lecture entitled 'Expectation on Future Nuclear Safety Research in Japan'. Twelve papers were then presented on the overview of research results and those of individual research activities in the fields of nuclear facilities, radioactive waste and environmental radioactivity. In the final session, a panel discussion was conducted with a title of 'Expectation on Future Nuclear Safety Research' chaired by Prof. Kimura, Chairperson of Special Committee on Nuclear Safety Research under NSC. Through the presentations and discussions, consensus has almost been obtained among participants for several key issues on safety research to be conducted by a unified new organization, such as giving priority to safety research as one of major missions, assurance of independence of safety research with the governmental funds, assurance of transparency of the planning process of safety research, separation and harmonization between safety research and developmental research, importance of maintaining fundamental research and research facilities, promotion of cooperation with relevant organizations considering the needs from industries, and importance of dissemination of research results and personnel training. The present report compiles the summaries of special lecture, papers, questions and comments, panel discussions, and OHPs presented in the conference. (author)

University Research and Development Activities: The Federal Income Tax Consequences of Research Contracts, Research Subsidiaries and Joint Ventures.

Science.gov (United States)

Kertz, Consuelo Lauda; Hasson, James K., Jr.

1986-01-01

Features of the federal income tax law applying to income received from commercially funded university-based scientific research and development activities are discussed, including: industry-sponsored research contracts, separately incorporated entities, partnerships and joint ventures, subsidiaries and unrelated income consequences of…

Conducting Educational Design Research

Science.gov (United States)

McKenney, Susan; Reeves, Thomas

2012-01-01

Educational design research blends scientific investigation with systematic development and implementation of solutions to educational problems. Empirical investigation is conducted in real learning settings--not laboratories--to craft usable and effective solutions. At the same time, the research is carefully structured to produce theoretical…

Joint Research Centre. Ispra establishment-Italy

International Nuclear Information System (INIS)

Angelini, Antonio

1976-01-01

A comprehensive review of the work carried out during 1974 and 1975 in the Ispra establishment of the Joint Research Centre is presented. A description of the activity carried out within the context of the running programmes is given. Some of the most relevant scientific and technical achievement are described from the viewpoints of the Scientific Departments of the Centre. The technical and administrative support activities are also presented. A list of publications issued by the Ispra Scientific staff is given

Research of alternative medicine formulary for joint pain treatment according to Food Act 1983

International Nuclear Information System (INIS)

Muhammad Ikmal Ahmad

2012-01-01

Joint is a type of tissue that connects two bones together. The main function of the joint tissues is to reduce the effect of friction that happens between bones resulting from the movement of the body. In a long term effect, the joint became dried and unable to absorb such vibration again. Thus, it will cause inflammation. A survey showed that patients with joints problems prefer the alternative prescription medicine rather than the modern medicines that are recommended by doctors. This is because it does not cost as much and it also can be easily obtained. However, the safety of consuming these products is doubtful and the side effect is unknown. This research is conducted by obtaining alternative prescription medicine for joint medication samples from Chow Kit, Kuala Lumpur area namely Jamu Jarum Emas, Maajun Kuat, Pil Tupai Jantan Asli, Kapsul Ajaib, Sendi Pil, Herba Ikan Haruan Asli, F.O.B., Tunglin Antirheumatic, and Sendi-Plus and the experiment is being tested using X-ray Fluorescence technique and referred to Akta Makanan 1983 to see whether the the medicines is safe to be consumed or not. Six heavy metal elements is stated in the act which are toxic to humans like arsenic, lead, tin, mercury, cadmium, and antimony. The amounts permitted by the act are 1, 2, 40, 0.05, 1 and 1 mg/ kg respectively. From the research, only three heavy metals have the amounts below the maximum amounts permitted by the law that is lead, cadmium, and antimony with the amount of 0.23, 0.23, and 0.04 mg/ kg while the amount of arsenic, lead, and mercury are way exceeds the law with the concentrations of 4.33 ± 0.460, 18.0 ± 1.11, and 0.120 ± 0.007 mg/ kg respectively. All samples manufacturer do not obey the law completely, thus the safety for consuming this products can cause severe effect on human health. (author)

FY-2013 FES (Fusion Energy Sciences) Joint Research Target Report

Energy Technology Data Exchange (ETDEWEB)

Fenstermacher, M. E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Garofalo, A. M. [General Atomics, San Diego, CA (United States); Gerhardt, S. P. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Hubbard, A. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Maingi, R. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Whyte, D. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

2013-09-30

The H-mode confinement regime is characterized by a region of good thermal and particle confinement at the edge of the confined plasma, and has generally been envisioned as the operating regime for ITER and other next step devices. This good confinement is often interrupted, however, by edge-localized instabilities, known as ELMs. On the one hand, these ELMs provide particle and impurity flushing from the plasma core, a beneficial effect facilitating density control and stationary operation. On the other hand, the ELMs result in a substantial fraction of the edge stored energy flowing in bursts to the divertor and first wall; this impulsive thermal loading would result in unacceptable erosion of these material surfaces if it is not arrested. Hence, developing and understanding operating regimes that have the energy confinement of standard H-mode and the stationarity that is provided by ELMs, while at the same time eliminating the impulsive thermal loading of large ELMs, is the focus of the 2013 FES Joint Research Target (JRT): Annual Target: Conduct experiments and analysis on major fusion facilities, to evaluate stationary enhanced confinement regimes without large Edge Localized Modes (ELMs), and to improve understanding of the underlying physical mechanisms that allow acceptable edge particle transport while maintaining a strong thermal transport barrier. Mechanisms to be investigated can include intrinsic continuous edge plasma modes and externally applied 3D fields. Candidate regimes and techniques have been pioneered by each of the three major US facilities (C-Mod, D3D and NSTX). Coordinated experiments, measurements, and analysis will be carried out to assess and understand the operational space for the regimes. Exploiting the complementary parameters and tools of the devices, joint teams will aim to more closely approach key dimensionless parameters of ITER, and to identify correlations between edge fluctuations and transport. The role of rotation will be

Annual report of the research works with joint-use JAERI facilities for fiscal 1974

International Nuclear Information System (INIS)

1975-01-01

Results of the research works by national universities with JAERI's (Japan Atomic Energy Research Institute) joint-use facilities for fiscal 1974 are described. Facilities are research reactors, Co-60, Linac, etc. Research results are presented in individual summaries, covering radiation damage and solid state physics, activation analysis and nuclear chemistry, irradiation effects, etc. Results of the joint works with JAERI are also presented similarly. (Mori, K.)

Proceedings of the joint meeting of ultrafast pulse high intensity laser research collaboration and JAEA-KPSI 7th symposium on advanced photon research

International Nuclear Information System (INIS)

2007-03-01

The Joint Meeting of Ultrafast Pulse High Intensity Laser Research Collaboration and JAEA-KPSI 7th Symposium on Advanced Photon Research was jointly held at Kansai Photon Research Institute, Japan Atomic Energy Agency (JAEA-KPSI) in Kizu, Kyoto on May 10-12, 2006. This report consists of contributed papers for the speeches and poster presentations including joint research and cooperative research performed in FY2004 and FY2005 with Japan Atomic Energy Research Institute (JAERI). The 47 of the presented papers are indexed individually. (J.P.N.)

Nuclear safety research at the European Commission's Joint Research Centre

International Nuclear Information System (INIS)

Toerroenen, K.

2003-01-01

Nuclear power plants currently generate some 35 % of electricity used in the European Union and applicant countries. Nuclear safety will therefore remain a priority for the EU, particularly in view of enlargement, the need to monitor ageing nuclear installations and the licencing of advanced new reactor systems. The European Commission's Joint Research Centre (JRC), with its long involvement and recognised competence in nuclear safety related activities, provides direct support to the European Commission services responsible for nuclear safety and civil protection. (author)

Conducting empirical research in virtual worlds

OpenAIRE

Minocha, Shailey

2011-01-01

We will focus on the following aspects of conducting empirical research in virtual worlds: the toolbox of techniques for data collection; selection of technique(s) for the research questions; tips on how the techniques need to be adapted for conducting research in virtual worlds; guidance for developing research materials such as the consent form, project summary sheet, and how to address the possible concerns of an institution’s ethics committee who may not be familiar with the avatar-based ...

Perceived coercion of noninstitutionalized elderly patients undergoing research for the diagnosis of temporomandibular joint dysfunction

Directory of Open Access Journals (Sweden)

Maria de Oliveira Alves Cavalcanti

Full Text Available OBJECTIVE: To evaluate perceived coercion (PC of noninstitutionalized elderly patients undergoing research for the diagnosis of temporomandibular joint dysfunction. METHOD: A cross-sectional study conducted with 1,112 elderly individuals aged 60 or older, enrolled in the Family Health Programme of the municipality of Areia, State of Paraíba, Brazil, from January to June 2013. The data collection tool was the Perceived Cohesion Scale (PSC. RESULTS: The participants were predominantly women (62.5% in the 60 to 69 age group (45.9%, illiterate (57.9% percent, married or in a common law marriage (54.1%, retired (83.6%, and receiving a monthly income under the minimum wage (72.0%. The average overall PC was 1.25+ 1.15 and Trend 1 (41,4%. There was a difference between the group of individuals who were literate, married and in a common law marriage and the members of the other groups. CONCLUSION: Results showed that the elderly patients were minimally coerced when deciding whether to participate in research for diagnosing temporomandibular joint dysfunction. They also revealed a significant association of PC with literacy and marital status.

Research review: Social motivation and oxytocin in autism--implications for joint attention development and intervention.

Science.gov (United States)

Stavropoulos, Katherine K M; Carver, Leslie J

2013-06-01

The social motivation hypothesis (SMH) suggests that individuals with autism spectrum disorders (ASD) are less intrinsically rewarded by social stimuli than their neurotypical peers. This difference in social motivation has been posited as a factor contributing to social deficits in ASD. Social motivation is thought to involve the neuropeptide oxytocin. Here, we review the evidence for oxytocin effects in ASD, and discuss its potential role in one important social cognitive behavior. Systematic searches were conducted using the PsychINFO and MEDLINE databases and the search terms 'oxytocin' and 'autism'; the same databases were used for separate searches for 'joint attention', 'intervention', and 'autism', using the same inclusion criteria as an earlier 2011 review but updating it for the period 2010 to October 2012. Several studies suggest that giving oxytocin to both individuals with ASD and neurotypical individuals can enhance performance on social cognitive tasks. Studies that have attempted to intervene in joint attention in ASD suggest that social motivation may be a particular obstacle to lasting effects. The review of the evidence for the SMH suggests a potential role for oxytocin in social motivation deficits in ASD. Because of its importance for later communicative and social development, the focus here is on implications of oxytocin and social motivation in the development of and interventions in joint attention. Joint attention is a central impairment in ASD, and as a result is the focus of several behavioral interventions. In describing this previous research on joint attention interventions in ASD, we pay particular attention to problems encountered in such studies, and propose ways that oxytocin may facilitate behavioral intervention in this area. For future research, integrating behavioral and pharmacological interventions (oxytocin administration) would be a worthwhile experimental direction to improve understanding of the role of oxytocin in ASD

Seismic response of rock joints and jointed rock mass

International Nuclear Information System (INIS)

Ghosh, A.; Hsiung, S.M.; Chowdhury, A.H.

1996-06-01

Long-term stability of emplacement drifts and potential near-field fluid flow resulting from coupled effects are among the concerns for safe disposal of high-level nuclear waste (HLW). A number of factors can induce drift instability or change the near-field flow patterns. Repetitive seismic loads from earthquakes and thermal loads generated by the decay of emplaced waste are two significant factors. One of two key technical uncertainties (KTU) that can potentially pose a high risk of noncompliance with the performance objectives of 10 CFR Part 60 is the prediction of thermal-mechanical (including repetitive seismic load) effects on stability of emplacement drifts and the engineered barrier system. The second KTU of concern is the prediction of thermal-mechanical-hydrological (including repetitive seismic load) effects on the host rock surrounding the engineered barrier system. The Rock Mechanics research project being conducted at the Center for Nuclear Waste Regulatory Analyses (CNWRA) is intended to address certain specific technical issues associated with these two KTUs. This research project has two major components: (i) seismic response of rock joints and a jointed rock mass and (ii) coupled thermal-mechanical-hydrological (TMH) response of a jointed rock mass surrounding the engineered barrier system (EBS). This final report summarizes the research activities concerned with the repetitive seismic load aspect of both these KTUs

Statistical study of static gasket conductance; Etude statistique de la conductance d'un joint d'etancheite statique

Energy Technology Data Exchange (ETDEWEB)

Flukiger, F

2005-10-15

This work is motivated by tightness technological problems associated with metallic gasket. The objective is a better understanding of leakage mechanisms, through the development of new computational tools. In this study, the aperture field between two rough surfaces in contact is described by a short correlated isotropic random Gaussian process. The system is studied as a set of independent elementary surfaces. Joint conductances are evaluated from a statistical study on those elementary surfaces. A computational code is developed using a network approach based on lubrication theory estimation of local conductances. The global conductance computation becomes analogous to an electrical problem for which the resistances are distributed on a random network. The network is built from the identification of the aperture field critical points. Maxima are linked through saddle points. Bond conductances are estimated at the aperture field saddle points. First, a purely plastic model of deformations is considered. Near percolation threshold the conductances display a power behaviour. Far from percolation threshold, numerical results are favourably compared with an effective medium approximation. Secondly, we study the impact of elastic deformations. A computational code based on Boussinesq approximation is coupled to the network approach. The results indicate a significant impact of elastic deformations on conductances. Finally, the network approach is adapted to simulate quasi-static drainage thanks to a classical invasion percolation algorithm. A good comparison between previous experiments and numerical predictions is obtained. (author)

Report of the workshop for searching future direction of INS-LBL joint research

International Nuclear Information System (INIS)

1983-06-01

The workshop for searching the future direction of INS-LBL joint research was held from January 10 to 12, 1983, In Hakone. The Japan-USA joint experiment was started seven years ago at the Bevalac in the Lawrence Berkeley Laboratory, and four years have elapsed since the beginning of INS-LBL joint research. The five-year program of the INS-LBL joint research will end in the spring of 1984, therefore the progress and the results are reviewed, and the policy taken hereafter is reconsidered. The past ten years can be divided into two periods, and in the first period, the release of light particles from the core reaction of heavy ions was taken up. In the second period, the precise measurement of particle correlation and the study on rare events were the main subjects. The five-year program mentioned above was organized in the second period. The results obtained have been internationally evaluated high. Recently, the beam of heavy nuclei such as Xe and U has become to be accelerated by the Bevalac. It was proposed to shift to the nuclear physics of new isotopes from 1984 on. (Kako, I.)

Joint resistance measurements of pancake and terminal joints for JT-60SA EF coils

Energy Technology Data Exchange (ETDEWEB)

Obana, Tetsuhiro, E-mail: obana.tetsuhiro@LHD.nifs.ac.jp [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan); Takahata, Kazuya; Hamaguchi, Shinji; Mito, Toshiyuki; Imagawa, Shinsaku [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan); Kizu, Kaname; Murakami, Haruyuki; Yoshida, Kiyoshi [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan)

2013-11-15

Highlights: • To evaluate the joint fabrication technology for the JT-60SA EF coils, joint resistance measurements were conducted with a joint sample. • The joint sample was composed of pancake and terminal joints. • The measurements demonstrated that both joints fulfilled the design requirement. • Considering the measurements, the characteristics of both joints were investigated using an analytical model that represents the joints. -- Abstract: To evaluate the joint fabrication technology for the JT-60SA EF coils, joint resistance measurements were conducted using a sample consisting of pancake and terminal joints. Both joints are shake-hands lap joints composed of cable-in-conduit conductors and a pure copper saddle-shaped spacer. The measurements demonstrated that both joints fulfilled the design requirement. Considering these measurements, the characteristics of both joints were investigated using analytical models that represent the joints. The analyses indicated that the characteristics of the conductors used in the joints affect the characteristics of the joints.

Research on Joint Parameter Inversion for an Integrated Underground Displacement 3D Measuring Sensor

Directory of Open Access Journals (Sweden)

Nanying Shentu

2015-04-01

Full Text Available Underground displacement monitoring is a key means to monitor and evaluate geological disasters and geotechnical projects. There exist few practical instruments able to monitor subsurface horizontal and vertical displacements simultaneously due to monitoring invisibility and complexity. A novel underground displacement 3D measuring sensor had been proposed in our previous studies, and great efforts have been taken in the basic theoretical research of underground displacement sensing and measuring characteristics by virtue of modeling, simulation and experiments. This paper presents an innovative underground displacement joint inversion method by mixing a specific forward modeling approach with an approximate optimization inversion procedure. It can realize a joint inversion of underground horizontal displacement and vertical displacement for the proposed 3D sensor. Comparative studies have been conducted between the measured and inversed parameters of underground horizontal and vertical displacements under a variety of experimental and inverse conditions. The results showed that when experimentally measured horizontal displacements and vertical displacements are both varied within 0 ~ 30 mm, horizontal displacement and vertical displacement inversion discrepancies are generally less than 3 mm and 1 mm, respectively, under three kinds of simulated underground displacement monitoring circumstances. This implies that our proposed underground displacement joint inversion method is robust and efficient to predict the measuring values of underground horizontal and vertical displacements for the proposed sensor.

How to Conduct Ethnographic Research

Science.gov (United States)

Sangasubana, Nisaratana

2011-01-01

The purpose of this paper is to describe the process of conducting ethnographic research. Methodology definition and key characteristics are given. The stages of the research process are described including preparation, data gathering and recording, and analysis. Important issues such as reliability and validity are also discussed.

Promoting responsible research conduct in a developing world ...

African Journals Online (AJOL)

As reports of research misconduct seem to increase, research integrity and the promotion of responsible research conduct are important for academic institutions. This paper considers what research integrity means for individual researchers and institutions, and explores trends for promoting responsible research conduct.

The Determinants of National Funding in Trans-national Joint Research: Exploring the Proximity Dimensions

Energy Technology Data Exchange (ETDEWEB)

Reale, E.; Spinello, A.; Zinilli, A.

2016-07-01

This paper investigates -using an explorative approach, why policy makers at national level engage in transnational joint research activities and mobilize dedicated financial resources. The research question is: why policy makers (either Governments or Research Funding Organisations-RFOs) in EU28 countries invest in transnational joint research activities beyond the European Framework Programmes, and what are the determinants of different levels of funding engagement? The question is relevant to understand the reasons that generate the existing imbalances within European countries as to the participation in transnational research, which are likely to create peripheries within the ERA, thus undermining the process of European integration. We assume that proximity linked to cognitive, institutional and organizational dimensions can affect the policy decisions about the level of funding (real engagement) joint European research programmes, because the closeness or distance in these dimensions generate similarities that are likely to influence the possibility of decision makers to collaborate in the implementation of research programmes. The paper also explores the existence of any effect of geographical proximity, although it is not supposed to play a role in policy decisions about investment in transnational research programmes. (Author)

Research Review: Social motivation and oxytocin in autism – implications for joint attention development and intervention

Science.gov (United States)

Stavropoulos, Katherine K. M.; Carver, Leslie J.

2013-01-01

Background and Scope The social motivation hypothesis (SMH) suggests that individuals with autism spectrum disorders (ASD) are less intrinsically rewarded by social stimuli than their neurotypical peers. This difference in social motivation has been posited as a factor contributing to social deficits in ASD. Social motivation is thought to involve the neuropeptide oxytocin. Here, we review the evidence for oxytocin effects in ASD, and discuss its potential role in one important social cognitive behavior. Methods Systematic searches were conducted using the PsychINFO and MEDLINE databases and the search terms “oxytocin”, and “autism”; the same databases were used for separate searches for “joint attention”, “intervention”, and “autism”, using the same inclusion criteria as an earlier 2011 review but updating it for the period 2010 to October 2012. Findings Several studies suggest that giving oxytocin to both individuals with ASD and typically developing individuals can enhance performance on social cognitive tasks. Studies that have attempted to intervene in joint attention in ASD suggest that social motivation may be a particular obstacle to lasting effects. Conclusions The review of the evidence for the SMH suggests a potential role for oxytocin in social motivation deficits in ASD. Because of its importance for later communicative and social development, the focus here is on implications of oxytocin and social motivation in the development of and interventions in joint attention. Joint attention is a central impairment in ASD, and as a result is the focus of several behavioral interventions. In describing this previous research on joint attention interventions in ASD, we pay particular attention to problems encountered in such studies, and propose ways that oxytocin may facilitate behavioral intervention in this area. For future research, integrating behavioral and pharmacological interventions (oxytocin administration) would be a worthwhile

Call for proposals for the Joint Canada-Israel Health Research ...

International Development Research Centre (IDRC) Digital Library (Canada)

23 nov. 2017 ... Call for proposals for the Joint Canada-Israel Health Research Program 2018 competition ... developmental neurobiology; neuro-immunology; neuroendocrinology; regenerative medicine in brain disease; cellular and molecular basis of cognition; modeling brain function; imaging of neural processes ...

International joint research of the Danube radioactivity

International Nuclear Information System (INIS)

Szerbin, P.; Szabo, G.; Guczi, J.; Koblinger-Bokori, E.; Kurtacs, E.; Dovlete, C.; Ruzsa, G.; Major, V.; Maringer, F.J.

1998-01-01

A PHARE (Poland Hungary Aid for Reconstruction of Economy) subsidized study was initiated in 1995 with coordination of Vituki Innosystem (Hungary) and with participation of Austrian, Romanian, and Hungarian research institutes to reveal and investigate in detail hot spots of radioactivity and sources of contamination in the Danube catchment area. The general objective of the project was to assess whether or not potential upstream radionuclide sources in the countries in the upper part of the Danube basin have resulted in evidential downstream accumulation of radionuclides and have a potential impact into the Black sea contamination. The presentation summarizes the results of the international joint research study, and some other data obtained in the framework of cooperation between monitoring institutes of the riparian states

Joint Research on Scatterometry and AFM Wafer Metrology

OpenAIRE

Bodermann, B.; Buhr, E.; Danzebrink, H.U.; Bär, M.; Scholze, F.; Krumrey, M.; Wurm, M.; Klapetek, P.; Hansen, P.E.; Korpelainen, V.; Van Veghel, M.; Yacoot, A.; Siitonen, S.; El Gawhary, O.; Burger, S.

2011-01-01

Supported by the European Commission and EURAMET, a consortium of 10 participants from national metrology institutes, universities and companies has started a joint research project with the aim of overcoming current challenges in optical scatterometry for traceable linewidth metrology. Both experimental and modelling methods will be enhanced and different methods will be compared with each other and with specially adapted atomic force microscopy (AFM) and scanning electron microscopy (SEM) m...

Ten steps to conducting health professional education research.

Science.gov (United States)

Scott, Karen; Caldwell, Patrina; Schuwirth, Lambert

2015-08-01

The approaches used to educate future clinicians must be continually improved through evidence-based methods. Clinicians interested in conducting education research need to understand the terminology and conventions of health professional education, in the same way that health professional educators from education backgrounds need to be aware of clinical practices and scientific mores and jargon. This article provides clinicians with 10 steps to conducting health professional education research, and encourages collaboration between clinicians interested in education and health professional educators. The basic steps in conducting education research are introduced, beginning with literature searches, using appropriate terminology and writing conventions, and finding research collaborators. We encourage researchers to ask themselves, 'So what?' about their research idea to ensure it is interesting and relevant to a journal's readers. The nuts and bolts of educational research are then presented, including research questions and methodologies, outcome measures, theoretical frameworks and epistemologies. The final two steps aim to foster internationally relevant and well-designed research studies. Conducting and publishing education research is often difficult for clinicians, who struggle with what is required. Yet clinicians who teach are ideally placed to identify the knowledge gaps about how we can more effectively educate future clinicians. These 10 steps provide clinicians with guidance on how to conduct education research so relevant research findings can inform the education of future clinicians. Conducting and publishing education research is often difficult for clinicians. © 2015 John Wiley & Sons Ltd.

Joint Degree Program: the Perspective of Employers

Directory of Open Access Journals (Sweden)

Tatjana Bilevičienė

2013-08-01

Full Text Available Purpose — the purpose of this article is to extend discussion towards the need and importance of joint degree programs in modern universities, introducing the perspective of the employers toward this question. Design/methodology/approach — the research was conducted to analyze the demand of joint degree programs from the perspective of employers, identify weak and strong aspects, opinion and demand for graduates of such programs. To achieve this purpose, a combination of theoretical and empirical methods was chosen: document analysis (previous studies, statistics was conducted and an online qualitative survey was organized. Findings — The analysis of articles, studies and statistics points out the challenges and threats faced by universities nowadays, forcing higher education institutions to find new ways to raise the quality of studies and raise the interest of employers to choose graduates from MRU, as well as the satisfaction of employers with their choice of employees. Theoretical analysis pointed out these challenges and requirements for the modern employee, summarised the challenges in preparation of IT field specialists. The conducted research results showed that the diploma of joint degree programs would not be treated as an advantage of possible employee from the perspective of employers in case some important aspects will not be taken into consideration by program creators. On the other hand, undeniably there are strong sides, such as knowledge in the fields of foreign language, international experience, innovativeness and creativeness of employees that would be treated as an advantage in the process of selection for positions of any technical support related positions. Research limitations/implications — employers, whose business activities are closely related to information technology, have been invited as experts. In addition, these experts have a good understanding of the specifics of joint degree programs. The received

Advanced Pavement Design: Finite Element Modeling for Rigid Pavement Joints, Report II: Model Development

National Research Council Canada - National Science Library

Hammons, Michael

1998-01-01

.... The objective of this research was to obtain data on the response of the ng'id pavement slab-joint-foundation system by conducting laboratory-scale experiments on jointed rigid pavement models...

2011 Joint Science Education Project: Research Experience in Polar Science

Science.gov (United States)

Wilkening, J.; Ader, V.

2011-12-01

The Joint Science Education Project (JSEP), sponsored by the National Science Foundation, is a two-part program that brings together students and teachers from the United States, Greenland, and Denmark, for a unique cross-cultural, first-hand experience of the realities of polar science field research in Greenland. During JSEP, students experienced research being conducted on and near the Greenland ice sheet by attending researcher presentations, visiting NSF-funded field sites (including Summit and NEEM field stations, both located on the Greenland ice sheet), and designing and conducting research projects in international teams. The results of two of these projects will be highlighted. The atmospheric project investigated the differences in CO2, UVA, UVB, temperature, and albedo in different Arctic microenvironments, while also examining the interaction between the atmosphere and water present in the given environments. It was found that the carbon dioxide levels varied: glacial environments having the lowest levels, with an average concentration of 272.500 ppm, and non-vegetated, terrestrial environments having the highest, with an average concentration of 395.143 ppm. Following up on these results, it is planned to further investigate the interaction of the water and atmosphere, including water's role in the uptake of carbon dioxide. The ecology project investigated the occurrence of unusual large blooms of Nostoc cyanobacteria in Kangerlussuaq area lakes. The water chemistry of the lakes which contained the cyanobacteria and the lakes that did not were compared. The only noticeable difference was of the lakes' acidity, lakes containing the blooms had an average pH value of 8.58, whereas lakes without the blooms had an average pH value of 6.60. Further investigation of these results is needed to determine whether or not this was a cause or effect of the cyanobacteria blooms. As a next step, it is planned to attempt to grow the blooms to monitor their effects on

CONCERT. ''European joint programme for the integration of radiation protection research''

International Nuclear Information System (INIS)

Schmitt-Hannig, A.; Birschwilks, M.; Jung, T.

2016-01-01

CONCERT is a joint project of the EU and its member states which assume joint financing: Over the next five years the largest European radiation protection programme so far will have available about 28 Million Euros for research and integrative measures, whereby the European Commission will bear 70 per cent of the costs. Integrative measures include, among others, targeted vocational education and training of junior researchers in radiation protection, better access to research and irradiation facilities for scientists, as well as a stronger connection of universities and research centres in radiation protection research.

Long-Run Effects of Public-Private Research Joint Ventures:

DEFF Research Database (Denmark)

Kaiser, Ulrich; Kuhn, Johan Moritz

Subsidized research joint ventures (RJVs) between public research institutions and industry have become increasingly popular in Europe and the US. We study the long-run effects of such a support scheme that has been maintained by the Danish government since 1995. To cope with identification...... problems we apply nearest neighbor caliper matching and conditional difference-in-difference estimation methods. Our main findings are that (i) program participation effects are instant for annual patent applications and last for three years, (ii) employment effects materialize first after one year...

Research on decommissioning of nuclear facilities 2. Study on optimum scenario using the AHP (Joint research)

International Nuclear Information System (INIS)

Shibahara, Yuji; Morishita, Yoshitsugu; Ishigami, Tsutomu; Yanagihara, Satoshi; Arita, Yuji

2013-01-01

To implement a decommissioning project reasonably, it is necessary and important to calculate project management data beforehand as well as to select an optimum dismantling scenario among various scenarios postulated. Little study on the subject of selecting an optimum scenario has been carried out, and it is one of the most important issues in terms of decision making. In FY 2009, Japan Atomic Energy Agency and University of Fukui launched the joint research of a decision making method which is important to determine a decommissioning plan. The purpose of this research is to formulate a methodology for selecting an optimum dismantling scenario among various scenarios postulated based on calculated results of project management data for FUGEN. Project management data for several dismantling scenarios postulated at FUGEN were evaluated based on actual dismantling work for feedwater heater at FUGEN, and an optimum scenario was discussed using the AHP, one of Multi-Criteria Decision Analysis Methods. This report describes the results of the joint research in FY 2010. (author)

Joint Institute for Nuclear Research Exhibition Science Bringing Nations Together

CERN Multimedia

2000-01-01

The JOINT INSTITUTE FOR NUCLEAR RESEARCH, JINR, was established by its founding countries in 1956 with the purpose of joining together the scientific and material potential of Member States in studies of the fundamental properties of matter. JINR is an international inter-governmental scientific research organization, whose activities are based on the principles of openness for participation to all interested states and of their equal, mutually beneficial collaboration.

Joint Institute for Nuclear Research Exhibition Science Bringing Nations Together

CERN Multimedia

1999-01-01

The JOINT INSTITUTE FOR NUCLEAR RESEARCH, JINR, was established by its founding countries in 1956 with the purpose of joining together the scientific and material potential of Member States in studies of the fundamental properties of matter. JINR is an international inter-governmental scientific research organization, the activities of which are based on the principles of openness for participation to all interested states of their equal, mutually beneficial collaboration.

Research Status and Feasibility Analysis on the Participation in International Joint Studies for Radionuclide and Colloid Migration Using Foreign Underground Research Facilities

Energy Technology Data Exchange (ETDEWEB)

Baik, Min Hoon; Park, Chung Kyun; Lee, Jae Kwang; Choi, Jong Won

2007-12-15

The research status of the potential international joint projects that we can join were analyzed by investigating world-wide underground research facilities. Based upon the investigations, we visited Aspo in Sweden and GTS in Switzerland, discussed about the participation in the international joint projects and mutual cooperation, and then discussed in detail about time and method for the participation by inviting an expert from Nagra. It is resulted from the investigations and discussions that it is most relevant to participate in the following two international joint projects. 1) Task Force on Modelling of Groundwater Flow and Transport of Solutes in Aspo, 2) CFM project in GTS. We also summarized the on-going current status for the participation in the two international joint projects.

Establishment of cooperation basis of joint research on the mixed waste molten salt oxidation technology

International Nuclear Information System (INIS)

Yang, Hee Chul; Cho, Y. J.; Kim, J. H.; Yoo, J. H.; Yun, H. C.; Lee, D. G.

2005-08-01

Molten salt oxidation, MSO for short, is a robust technology that can effectively treat mixed waste (radioactive waste including hazardous metals or organics). It can safely and economically treat the difficult wastes such as not-easily destroyable toxic organic waste, medical waste, chemical warfare and energetic materials such as propellant and explosives, all of which are not easily treated by an incinerator or other currently existing thermal treatment system. Therefore, molten salt oxidation technology should be developed and utilized to treat a lot of niche waste stored in the nuclear and environmental industries. So, if we put the MSO technology to practical use by Korea-Vietnam joint research, we can reduce R and D fund for MSO technology by ourselves and we can expect an export of the outcome of nuclear R and D in Korea. For Establishment of cooperation basis of joint research concerning molten salt oxidation technology between KOREA and VIETNAM, in this research, We invited two Vietnamese researchers and we introduced our experimental scale molten salt oxidation system in order to let them understand molten salt oxidation technology. We also visited Viet man and we consulted about molten salt oxidation process. We held seminar on the mixed waste molten salt oxidation technology, discussed on the joint research on the mixed waste molten salt oxidation technology and finally we wrote MOU for joint research

Establishment of cooperation basis of joint research on the mixed waste molten salt oxidation technology

Energy Technology Data Exchange (ETDEWEB)

Yang, Hee Chul; Cho, Y. J.; Kim, J. H.; Yoo, J. H.; Yun, H. C.; Lee, D. G

2005-08-01

Molten salt oxidation, MSO for short, is a robust technology that can effectively treat mixed waste (radioactive waste including hazardous metals or organics). It can safely and economically treat the difficult wastes such as not-easily destroyable toxic organic waste, medical waste, chemical warfare and energetic materials such as propellant and explosives, all of which are not easily treated by an incinerator or other currently existing thermal treatment system. Therefore, molten salt oxidation technology should be developed and utilized to treat a lot of niche waste stored in the nuclear and environmental industries. So, if we put the MSO technology to practical use by Korea-Vietnam joint research, we can reduce R and D fund for MSO technology by ourselves and we can expect an export of the outcome of nuclear R and D in Korea. For Establishment of cooperation basis of joint research concerning molten salt oxidation technology between KOREA and VIETNAM, in this research, We invited two Vietnamese researchers and we introduced our experimental scale molten salt oxidation system in order to let them understand molten salt oxidation technology. We also visited Viet man and we consulted about molten salt oxidation process. We held seminar on the mixed waste molten salt oxidation technology, discussed on the joint research on the mixed waste molten salt oxidation technology and finally we wrote MOU for joint research.

Long-Run Effects of Public–Private Research Joint Ventures

DEFF Research Database (Denmark)

Kaiser, Ulrich; Kuhn, Johan Moritz

2012-01-01

Subsidized research joint ventures (RJVs) between public research institutions and industry have become increasingly popular in Europe and the US. We study the long-run effects of such a support scheme that has been maintained by the Danish government since 1995. To cope with identification...... problems we apply nearest neighbor matching and conditional difference-in-difference estimation methods. Our main findings are that (i) program participation effects are instant for annual patent applications and last for three years, (ii) employment effects materialize first after one year and (iii...

The accelerators of the Joint Institute for Nuclear Research at Dubna

International Nuclear Information System (INIS)

Kuehn, B.

1981-01-01

History, state-of-the-art, and the planned development of the high-energy and heavy-ion accelerators at the Joint Institute for Nuclear Research at Dubna are reviewed. Data on the particle beams available at present and in the future are given. (author)

Joint DOE-PNC research on the use of transparency in support of Nuclear Nonproliferation

International Nuclear Information System (INIS)

Mochiji, Toshiro; Tazaki, Makiko; Keeney, Robin; Puckett, John; Stanbro, William; Nakhleh, Charles

1998-01-01

PNC and LANL collaborated in research on the concept of transparency in nuclear nonproliferation. The research was based on the Action Sheet no.21, which was signed in February 1996, 'The Joint Research on 'Transparency' in Nuclear Nonproliferation' under the 'Agreement between the Power Reactor and Nuclear Fuel Development Corporation of Japan (PNC) and the US Department of Energy (DOE) for Cooperation in Research and Development Concerning Nuclear Material Control and Accounting Measures for Safeguards and Nonproliferation.' The scope of the research was a fundamental study on transparency to clarify the means to improve worldwide acceptability of nuclear energy from a nuclear nonproliferation viewpoint. The research encompassed three main topics: the policy environment of transparency, the development of transparency options, and technical options for transparency. Each side performed independent research then joint workshops were held to exchange information and views. This paper summarizes the results of these workshops. (author)

Fiscal 1999 research cooperation on the development of an advanced multimedia information system. Cooperation on joint research; 1999 nendo senshinteki multimedia joho system no kaihatsu ni kansuru kenkyu kyoryoku. Kyodo kenkyu kyoryoku

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

This report covers fiscal 1999 activities under a 5-year program which is a joint effort with China started in fiscal 1998 for the development and verification of a prototype for the above-named system to comprehensively deal with commodity distribution information, education and culture information, agriculture information, disaster/forest fire control information, medical treatment information, and environment monitor/flood watch information. A total of 12 Chinese researchers were invited to this country over the systems for disaster/forest fire control information and environment monitor/flood watch information, when the status in Japan and progress in China of the research were discussed. Joint research in China involved on-site surveys conducted relative to systems for commodity distribution information, education and culture information, medical treatment information, and environment monitor/flood watch information. Endeavors were then exerted, which concerned the survey of candidate locations for distribution centers, acknowledgement of the result of verification tests, training for equipment operation, arrangements for the contents of research, and the establishment of a mutual understanding toward the signing of annexes to the Agreement. (NEDO)

Japan-EU joint research project on petroleum substituting energy; Nichi EU sekiyu daitai energy kanren kyodo kenkyu jigyo

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

Four EU research workers were invited from Portugal, Italy and France for promoting R & D of petroleum substituting energies in Japan. The joint research on the wide area energy use network system (advanced district cooling and heating) includes the experimental technology for measuring heat transfer acceleration and drag reduction, evaluation of rheological characteristics of fluid, and development and selection of an adequate composition equation of fluid. The joint research on MCFC includes the test method and procedure of components and cells in relation to corrosion by molten carbonate, elution of NiO cathodes, electrode modeling and alternative materials for cathodes. The joint research on geothermal gases includes the research method of fumarolic gases such as volcanic gas and geothermal gas, applications in Italian geothermal fields and the relation of geothermal gases with the origin of fluid, deep conditions and volcanic activity. In addition, the joint research on light energy conversion (energy transfer system between binuclear metal complexes) and the performance and use of metal complexes as catalyst for polymer electrolyte fuel cells was also performed. 52 refs., 20 figs., 3 tabs.

Mechanism of Solder Joint Cracks in Anisotropic Conductive Films Bonding and Solutions: Delaying Hot-Bar Lift-Up Time and Adding Silica Fillers

Directory of Open Access Journals (Sweden)

Shuye Zhang

2018-01-01

Full Text Available Micron sizes solder metallurgical joints have been applied in a thin film application of anisotropic conductive film and benefited three general advantages, such as lower joint resistance, higher power handling capability, and reliability, when compared with pressure based contact of metal conductor balls. Recently, flex-on-board interconnection has become more and more popular for mobile electronic applications. However, crack formation of the solder joint crack was occurred at low temperature curable acrylic polymer resins after bonding processes. In this study, the mechanism of SnBi58 solder joint crack at low temperature curable acrylic adhesive was investigated. In addition, SnBi58 solder joint cracks can be significantly removed by increasing the storage modulus of adhesives instead of coefficient of thermal expansion. The first approach of reducing the amount of polymer rebound can be achieved by using an ultrasonic bonding method to maintain a bonding pressure on the SnBi58 solder joints cooling to room temperature. The second approach is to increase storage modulus of adhesives by adding silica filler into acrylic polymer resins to prevent the solder joint from cracking. Finally, excellent acrylic based SnBi58 solder joints reliability were obtained after 1000 cycles thermal cycling test.

Main benefits from 30 years of joint projects in nuclear safety

International Nuclear Information System (INIS)

Thadani, Ashok; Teschendorff, Victor; Vitanza, Carlo; Hrehor, Miroslav

2012-01-01

One of the major achievements of the OECD Nuclear Energy Agency (NEA) is the knowledge it has helped to generate through the organisation of joint international research projects. Such projects, primarily in the areas of nuclear safety and radioactive waste management, enable interested countries, on a cost-sharing basis, to pursue research or the sharing of data with respect to particular areas or issues. Over the years, more than 30 joint projects have been conducted with wide participation of member countries. The purpose of this report is to describe the achievements of the OECD/NEA joint projects on nuclear safety research that have been carried out over the past three decades, with a particular focus on thermal-hydraulics, fuel behaviour and severe accidents. It shows that the resolution of specific safety issues in these areas has greatly benefited from the joint projects' activities and results. It also highlights the added value of international co-operation for maintaining unique experimental infrastructure, preserving skills and generating new knowledge

FAA/NASA Joint University Program for Air Transportation Research 1994-1995

Science.gov (United States)

Remer, J. H.

1998-01-01

The Joint University Program for Air Transportation Research (JUP) is a coordinated set of three grants co-sponsored by the Federal Aviation Administration (FAA) and the National Aeronautics and Space Administration (NASA). Under JUP, three institutions: the Massachusetts Institute of Technology, Princeton, and Ohio Universities receive research grants and collaborate with FAA and NASA in defining and performing civil aeronautics research in a multitude of areas. Some of these disciplines are artificial intelligence, control theory, atmospheric hazards, navigation, avionics, human factors, flight dynamics, air traffic management, and electronic communications.

The joint center for energy storage research: A new paradigm for battery research and development

International Nuclear Information System (INIS)

Crabtree, George

2015-01-01

The Joint Center for Energy Storage Research (JCESR) seeks transformational change in transportation and the electricity grid driven by next generation high performance, low cost electricity storage. To pursue this transformative vision JCESR introduces a new paradigm for battery research: integrating discovery science, battery design, research prototyping and manufacturing collaboration in a single highly interactive organization. This new paradigm will accelerate the pace of discovery and innovation and reduce the time from conceptualization to commercialization. JCESR applies its new paradigm exclusively to beyond-lithium-ion batteries, a vast, rich and largely unexplored frontier. This review presents JCESR's motivation, vision, mission, intended outcomes or legacies and first year accomplishments

The joint center for energy storage research: A new paradigm for battery research and development

Energy Technology Data Exchange (ETDEWEB)

Crabtree, George [Joint Center for Energy Storage Research, Argonne National Laboratory, 9700 S. Cass Avenue, Argonne, IL 60439, USA and University of Illinois at Chicago, 845 W. Taylor Street, Chicago, IL 60607 (United States)

2015-03-30

The Joint Center for Energy Storage Research (JCESR) seeks transformational change in transportation and the electricity grid driven by next generation high performance, low cost electricity storage. To pursue this transformative vision JCESR introduces a new paradigm for battery research: integrating discovery science, battery design, research prototyping and manufacturing collaboration in a single highly interactive organization. This new paradigm will accelerate the pace of discovery and innovation and reduce the time from conceptualization to commercialization. JCESR applies its new paradigm exclusively to beyond-lithium-ion batteries, a vast, rich and largely unexplored frontier. This review presents JCESR's motivation, vision, mission, intended outcomes or legacies and first year accomplishments.

Bioethical Issues in Conducting Pediatric Dentistry Clinical Research.

Science.gov (United States)

Garrocho-Rangel, Arturo; Cerda-Cristerna, Bernardino; Pozos-Guillen, Amaury

Pediatric clinical research on new drugs and biomaterials involves children in order to create valid and generalizable knowledge. Research on vulnerable populations, such as children, is necessary but only admissible when researchers strictly follow methodological and ethical standards, together with the respect to human rights; and very especially when the investigation cannot be conducted with other population or when the potential benefits are specifically for that age group. Clinical research in Pediatric Dentistry is not an exception. The aim of the present article was to provide the bioethical principles (with respect to the child/parents' autonomy, benefit/risk analysis, and distributive justice), and recommendations, including informed consent, research ethics committees, conflict of interest, and the "equipoise" concept. Current and future worldwide oral health research in children and adolescents must be conducted incorporating their perspectives in the decision-making process as completely as possible. This concept must be carefully considered when a dental clinical study research is going to be planned and conducted, especially in the case of randomized controlled trials, in which children will be recruited as participants.

Report on surveys and researches to excavate international joint researches related to industrial technologies; Sangyo gijutsu ni kansuru kokusai kyodo kenkyu hakkutsu no tame no chosa kenkyu hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Five themes were taken up for a project of the 'surveys and researches to excavate international joint researches related to industrial technologies'. Investigation groups were organized and dispatched for each theme toperform domestic and overseas surveys. Discussions were given on eachtheme for the possibilities of structuring international joint researches. The five themes are as follows: 'wearable information network related technologies', wherein technologies to micronize information devices have been advanced rapidly, and the technologies are entering the age from personalizing and mobilizing the information into the wearable computing; this theme is intended to develop systems to unify these technologies by means of international joint researches: 'surveys on using unutilized animal oils and fats as chemical raw materials', which are intended to make clear possibilities and problems in utilizing animal oils and fats as raw materials for the chemical industry that can substitute fossil resources: 'international joint researches on new glasses' and 'processes to manufacture semiconductors using glassy carbon' to develop glassy carbon having excellent chemical resistance substituting quartz: and 'international joint researches on the Russian project which places environment and energy in its center'. (NEDO)

The report of joint research over 20 years of the Bulgarian Academy of Sciences and Hiroshima Institute of Technology

OpenAIRE

Tanaka,Takeshi; Vutova,Katia

2014-01-01

The Department of Electronics and Computer Engineering, Hiroshima Institute of Technology (EC-HIT) started the international joint research with the Laboratory “Physical Problems of Electron Beam technologies” of the Institute of Electronics, Bulgarian Academy of Sciences (IE-BAS) from 1994. 20 papers, included a book chapter, were published by implementing the international joint research under 5 Agreements for Academic Cooperation and Exchange between HIT and IEBAS. Our international joint ...

Conducting research with African elderly persons: Is their ...

African Journals Online (AJOL)

The increase in social research conducted as a result of HIV/AIDS raises further concerns about the ethics of conducting research on elderly African persons with regards to issues of autonomy and informed consent. This paper examines the ethics and the notion of vulnerability of African elderly persons within the context of ...

CONCERT-'European Joint Programme for the Integration at Radiation Protection Research'; CONCERT-''European Joint Programme for the Integration at Radiation Protection Research''

Energy Technology Data Exchange (ETDEWEB)

Birschwilks, Mandy; Schmitt-Hannig, Annemarie [Bundesamt fuer Strahlenschutz, Oberschleissheim (Germany). Internationale und Nationale Zusammenarbeit im Strahlenschutz; Jung, Thomas [Bundesamt fuer Strahlenschutz, Oberschleissheim (Germany). Strahlenschutz und Gesundheit

2016-08-01

In 2009 the High Level Expert Group (HLEG) on low dose research recommended the development of a scientific platform for low dose radiation research. The foundation of MELODI (Multidisciplinary European Low Dose Initiative) occurred in 2010. In 2015 a new project on radiation protection research was established: CONCERT (European Joint Programme for the Integration at Radiation Protection Research). The aim is the coordination of the already existing scientific platforms MELODI (radiation effects and interactions), ALLIANCE (radioecology), NERIS (nuclear and radiological emergency protection) and EURADOS (radiation dosimetry). With CONCERT an efficient use of this infrastructure for research cooperation and transparency is intended.

Biomimetic Spider Leg Joints: A Review from Biomechanical Research to Compliant Robotic Actuators

Directory of Open Access Journals (Sweden)

Stefan Landkammer

2016-07-01

Full Text Available Due to their inherent compliance, soft actuated joints are becoming increasingly important for robotic applications, especially when human-robot-interactions are expected. Several of these flexible actuators are inspired by biological models. One perfect showpiece for biomimetic robots is the spider leg, because it combines lightweight design and graceful movements with powerful and dynamic actuation. Building on this motivation, the review article focuses on compliant robotic joints inspired by the function principle of the spider leg. The mechanism is introduced by an overview of existing biological and biomechanical research. Thereupon a classification of robots that are bio-inspired by spider joints is presented. Based on this, the biomimetic robot applications referring to the spider principle are identified and discussed.

Conducting qualitative research in audiology: a tutorial.

Science.gov (United States)

Knudsen, Line V; Laplante-Lévesque, Ariane; Jones, Lesley; Preminger, Jill E; Nielsen, Claus; Lunner, Thomas; Hickson, Louise; Naylor, Graham; Kramer, Sophia E

2012-02-01

Qualitative research methodologies are being used more frequently in audiology as it allows for a better understanding of the perspectives of people with hearing impairment. This article describes why and how international interdisciplinary qualitative research can be conducted. This paper is based on a literature review and our recent experience with the conduction of an international interdisciplinary qualitative study in audiology. We describe some available qualitative methods for sampling, data collection, and analysis and we discuss the rationale for choosing particular methods. The focus is on four approaches which have all previously been applied to audiologic research: grounded theory, interpretative phenomenological analysis, conversational analysis, and qualitative content analysis. This article provides a review of methodological issues useful for those designing qualitative research projects in audiology or needing assistance in the interpretation of qualitative literature.

A coupled mechanical-hydrological methodology for modeling flow in jointed rock masses using laboratory data for the joint flow model

International Nuclear Information System (INIS)

Voss, C.F.; Bastian, R.J.; Shotwell, L.R.

1986-01-01

Pacific Northwest Laboratory (PNL) currently supports the U.S. Department of Energy's Office of Civilian Radioactive Waste Management in developing and evaluating analytical methods for assessing the suitability of sites for geologic disposal of high-level radioactive waste. The research includes consideration of hydrological, geomechanical, geochemical, and waste package components and the evaluation of the degree of coupling that can occur between two or more of these components. The PNL effort and those of other research groups investing potential waste sites in the U.S. and abroad are producing a suite of computer codes to analyze the long-term performance of the proposed repository sites. This paper summarizes the ongoing research in rock mechanics at PNL involving flow through jointed rock. The objective of this research is to develop a methodology for modeling the coupled mechanical-hydrological process of flow through joints and then attempt to validate a ''simple'' model using small-scale laboratory test data as a basis for judging whether the approach has merit. This paper discusses the laboratory tests being conducted to develop a joint behavioral constitutive model for the numerical method under development and the modeling approach being considered

Reliability of agriculture universal joint shafts based on temperature measuring in universal joint bearing assemblies

Directory of Open Access Journals (Sweden)

Аleksandar Asonja

2015-03-01

Full Text Available This paper presents a research into reliability calculations of agriculture double universal joint shafts based on temperature measuring in cardan-type universal joint bearing assemblies. Special laboratory equipment was developed for this research which is presented in the paper. The objective of this research was to test the real life span of universal joint shafts in the laboratory and in field, to obtain the results which can be used to improve the reliability of universal joint shafts. If the presented research were used along with maintenance measures recommended in the paper and with proper use, the level of reliability of the shafts would be 2.1 times higher. The presented results of the research showed that needle bearings, i.e. bearing assemblies of the joints, are the most critical elements on universal joint shafts and are possible causes of their lower reliability. The second universal joint is the part with the lowest reliability in the observed technical system.

Experiences from a pilot study on how to conduct a qualitative multi-country research project regarding use of antibiotics in Southeast Europe.

Science.gov (United States)

Kaae, Susanne; Sporrong, Sofia Kälvemark; Traulsen, Janine Morgall; Wallach Kildemoes, Helle; Nørgaard, Lotte Stig; Jakupi, Arianit; Raka, Denis; Gürpinar, Emre Umut; Alkan, Ali; Hoxha, Iris; Malaj, Admir; Cantarero, Lourdes Arevalo

2016-01-01

In 2014, a qualitative multi-country research project was launched to study the reasons behind the high use of antibiotics in regions of Southeast Europe by using previously untrained national interviewers (who were engaged in other antibiotic microbial resistance-related investigations) to conduct qualitative interviews with local patients, physicians and pharmacists. Little knowledge exists about how to implement qualitative multi-country research collaborations involving previously untrained local data collectors. The aim of this paper was therefore to contribute to the knowledge regarding how to conduct these types of research projects by evaluating a pilot study of the project. Local data collectors conducted the study according to a developed protocol and evaluated the study with the responsible researcher-team from University of Copenhagen. The pilot study focused on 'local ownership', 'research quality' and 'feasibility' with regard to successful implementation and evaluation. The evaluation was achieved by interpreting 'Skype' and 'face to face' meetings and email correspondence by applying 'critical common sense'. Local data collectors achieved a sense of joint ownership. Overall, the protocol worked well. Several minor challenges pertaining to research quality and feasibility were identified, in particular obtaining narratives when conducting interviews and recruiting patients for the study. Furthermore, local data collectors found it difficult to allocate sufficient time to the project. Solutions were discussed and added to the protocol. Despite the challenges, it was possible to achieve an acceptable scientific level of research when conducting qualitative multi-country research collaboration under the given circumstances. Specific recommendations to achieve this are provided by the authors.

Tensile Strength of Finger Joints at Elevated Temperatures

DEFF Research Database (Denmark)

Nielsen, Peter C.; Olesen, Frits Bolonius

A series of test s aimed a t establishing the effect of temperature upon the tensile strength parallel-to-grain of finger jointed laminae for glulam has been conducted in the Fire Research Laboratory at Aalborg University Centre. The objective of this report is to present the background...

A Study of Joint Cost Inclusion in Linear Programming Optimization

Directory of Open Access Journals (Sweden)

P. Armaos

2013-08-01

Full Text Available The concept of Structural Optimization has been a topic or research over the past century. Linear Programming Optimization has proved being the most reliable method of structural optimization. Global advances in linear programming optimization have been recently powered by University of Sheffield researchers, to include joint cost, self-weight and buckling considerations. A joint cost inclusion scopes to reduce the number of joints existing in an optimized structural solution, transforming it to a practically viable solution. The topic of the current paper is to investigate the effects of joint cost inclusion, as this is currently implemented in the optimization code. An extended literature review on this subject was conducted prior to familiarization with small scale optimization software. Using IntelliFORM software, a structured series of problems were set and analyzed. The joint cost tests examined benchmark problems and their consequent changes in the member topology, as the design domain was expanding. The findings of the analyses were remarkable and are being commented further on. The distinct topologies of solutions created by optimization processes are also recognized. Finally an alternative strategy of penalizing joints is presented.

Research on compliance coefficient calculation for heterogeneity material bolted joints of reactor internal

International Nuclear Information System (INIS)

Li Qing; Ren Xin; Zhang Kangda

2009-01-01

Using the finite element method, calculation and test are conducted on the bolted joints of four different diameters, and the existing calculation method for bolt compliance coefficient is analyzed. The results indicate that the calculated and test results by finite element method are agreed well, and value D/t f and β have a linear relation. (authors)

Specific storage and hydraulic conductivity tomography through the joint inversion of hydraulic heads and self-potential data

Science.gov (United States)

Ahmed, A. Soueid; Jardani, A.; Revil, A.; Dupont, J. P.

2016-03-01

Transient hydraulic tomography is used to image the heterogeneous hydraulic conductivity and specific storage fields of shallow aquifers using time series of hydraulic head data. Such ill-posed and non-unique inverse problem can be regularized using some spatial geostatistical characteristic of the two fields. In addition to hydraulic heads changes, the flow of water, during pumping tests, generates an electrical field of electrokinetic nature. These electrical field fluctuations can be passively recorded at the ground surface using a network of non-polarizing electrodes connected to a high impedance (> 10 MOhm) and sensitive (0.1 mV) voltmeter, a method known in geophysics as the self-potential method. We perform a joint inversion of the self-potential and hydraulic head data to image the hydraulic conductivity and specific storage fields. We work on a 3D synthetic confined aquifer and we use the adjoint state method to compute the sensitivities of the hydraulic parameters to the hydraulic head and self-potential data in both steady-state and transient conditions. The inverse problem is solved using the geostatistical quasi-linear algorithm framework of Kitanidis. When the number of piezometers is small, the record of the transient self-potential signals provides useful information to characterize the hydraulic conductivity and specific storage fields. These results show that the self-potential method reveals the heterogeneities of some areas of the aquifer, which could not been captured by the tomography based on the hydraulic heads alone. In our analysis, the improvement on the hydraulic conductivity and specific storage estimations were based on perfect knowledge of electrical resistivity field. This implies that electrical resistivity will need to be jointly inverted with the hydraulic parameters in future studies and the impact of its uncertainty assessed with respect to the final tomograms of the hydraulic parameters.

Brief of the joint research with universities, etc. for 2002. Except the research by the JNC cooperative research scheme on the nuclear fuel cycle

International Nuclear Information System (INIS)

2003-09-01

The Japan Nuclear Cycle Development Institute (JNC) promote the basic and fundamental research in relation to the research and development projects of JNC through collaboration with universities and other research institutes (referred to as 'universities, etc.' below). This report includes a summary of the results of the research carried out in fiscal year 2002 on 15 joint researches with universities, etc. In addition, this report removes the research by the JNC Cooperative Research Scheme on the Nuclear Fuel Cycle. (author)

Conducting qualitative research in audiology: A tutorial

NARCIS (Netherlands)

Knudsen, L.V.; Laplante-Levesque, A.; Jones, L.; Preminger, J.E.; Nielsen, C.; Lunner, T.; Hickson, L.; Naylor, G.; Kramer, S.E.

2012-01-01

Objective: Qualitative research methodologies are being used more frequently in audiology as it allows for a better understanding of the perspectives of people with hearing impairment. This article describes why and how international interdisciplinary qualitative research can be conducted. Design:

Report of the second joint Research Committee for Fusion Reactor and Materials. July 12, 2002, Tokyo, Japan

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-05-01

Joint research committees in purpose of the discussion on DEMO blanket in view point of the both of reactor technology and materials were held by the Research Committee for Fusion Reactor and Fusion Materials. The joint research committee was held in Tokyo on July 12, 2002. In the committee, the present status of development of solid and liquid breeding blanket, the present status of development of reduced activation structure materials, and IFMIF (International Fusion Materials Irradiation Facility) program were discussed based on the discussions of the development programs of the blanket and materials at the first joint research committee. As a result, it was confirmed that high electric efficiency with 41% would be obtained in the solid breeding blanket system, that neutron radiation data of reduced activation ferritic steel was obtained by HFIR collaboration, and that KEP (key element technology phase) of IFMIF would be finished at the end of 2002 and the data base for the next step, i.e. EVEDA (engineering validation/engineering design activity) was obtained. In addition, the present status of ITER CTA, which was a transient phase for the construction, and the outline of ITER Fast Track, which was an accelerated plan for the performance of the power plants, were reported. This report consists of the summary of the discussion and the viewgraphs which were used at the second joint research committee, and these are very useful for the researchers of the fusion area in Japan. (author)

Evidence-based radiology (part 2): Is there sufficient research to support the use of therapeutic injections into the peripheral joints?

Energy Technology Data Exchange (ETDEWEB)

Peterson, Cynthia; Hodler, Juerg [Orthopaedic University Hospital of Balgrist, Radiology, Zuerich (Switzerland)

2010-01-15

This review article addresses the best evidence currently available for the effectiveness of injection therapy for musculoskeletal conditions involving the peripheral joints. The research is presented by anatomical region and areas of controversy and the need for additional research are identified. Randomized controlled trials, meta-analyses and systematic reviews are lacking that address the effectiveness of therapeutic injections to the sternoclavicular, acromioclavicular, ankle and foot joints. No research studies of any kind have been reported for therapeutic injections of the sternoclavicular joint. With the exception of the knee, possibly the hip and patients with inflammatory arthropathies, research does not unequivocally support the use of therapeutic joint injections for most of the peripheral joints, including the shoulder. Additionally, controversy exists in some areas as to whether or not corticosteroids provide better outcomes compared to local anesthetic injections alone. When viscosupplementation injections are compared to corticosteroids in patients with osteoarthritis of the knee, the evidence supports the use of viscosupplementation for more prolonged improvement in outcomes, with corticosteroids being good for short-term relief. (orig.)

Evidence-based radiology (part 2): Is there sufficient research to support the use of therapeutic injections into the peripheral joints?

International Nuclear Information System (INIS)

Peterson, Cynthia; Hodler, Juerg

2010-01-01

This review article addresses the best evidence currently available for the effectiveness of injection therapy for musculoskeletal conditions involving the peripheral joints. The research is presented by anatomical region and areas of controversy and the need for additional research are identified. Randomized controlled trials, meta-analyses and systematic reviews are lacking that address the effectiveness of therapeutic injections to the sternoclavicular, acromioclavicular, ankle and foot joints. No research studies of any kind have been reported for therapeutic injections of the sternoclavicular joint. With the exception of the knee, possibly the hip and patients with inflammatory arthropathies, research does not unequivocally support the use of therapeutic joint injections for most of the peripheral joints, including the shoulder. Additionally, controversy exists in some areas as to whether or not corticosteroids provide better outcomes compared to local anesthetic injections alone. When viscosupplementation injections are compared to corticosteroids in patients with osteoarthritis of the knee, the evidence supports the use of viscosupplementation for more prolonged improvement in outcomes, with corticosteroids being good for short-term relief. (orig.)

75 FR 14190 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Joint Venture To...

Science.gov (United States)

2010-03-24

... Production Act of 1993--Joint Venture To Perform Project Entitled Robotic Rehabilitation of Aging Water... Cooperative Research and Production Act of 1993, 15 U.S.C. 4301 et sect. (``the Act''), Joint [[Page 14191

Application of micro-PIXE and imaging technology to life science (Joint research)

International Nuclear Information System (INIS)

Satoh, Takahiro; Ishii, Keizo

2011-03-01

The joint research on 'Application of micro-PIXE and imaging technology to life science' supported by the Inter-organizational Atomic Energy Research Program, had been performed for three years, from 2006FY to 2009FY. Aiming to apply in-air micro-PIXE analytical system to life science, the research was consisting of 7 collaborative themes related to beam engineering for micro-PIXE and applied technology of element mapping in biological/medical fields. The system, so-called micro-PIXE camera, to acquire spatial element mapping in living cells was originally developed by collaborative research between the JAEA and the department of engineering of Tohoku University. This review covers these research results. (author)

Proceedings of the seminar on the joint research project between JAERI and Universities. 'Actinide researches for 21st century - fusion between chemistry and engineering'. August 20-21, 1999, Japan Atomic Energy Research Inst., Tokai, Japan

International Nuclear Information System (INIS)

2000-06-01

The Seminar on the Joint Research Project between JAERI and Universities was held in Tokai, August 20-21, 1999, to discuss future perspectives of the actinide researches for the nuclear fuel cycle. The papers related to the Joint Research Project on the Backend Chemistry were presented and discussed. The present report complies the papers contributed to the Seminar. (author)

Numerical/experimental research on welded joints in aluminium truss girders

NARCIS (Netherlands)

van Hove, B.W.E.M.; Soetens, F.; Mazzolani, F.M.; Bellucci, F.; Faggiano, B.; Squillace, A.

2016-01-01

Welded joints in a 30 meter span aluminium truss girder were investigated numerically and experimentally. Since aluminium design rules for welded K-and N-joints in CHS truss girders were lacking the joints were checked using steel design rules. Calculations showed that the N-joints were governing

Code of Conduct on the Safety of Research Reactors

International Nuclear Information System (INIS)

2006-09-01

The Board of Governors of the International Atomic Energy Agency (IAEA) adopted the Code of Conduct on the Safety of Research Reactors on 8 March 2004. The Board's action was the culmination of several years of work to develop the Code and obtain a consensus on its provisions. The process leading to the Code began in 1998, when the International Nuclear Safety Advisory Group (INSAG) informed the Director General of concerns about the safety of research reactors. In 2000, INSAG recommended that the Secretariat begin developing an international protocol or a similar legal instrument to address those concerns. In September 2000, in resolution GC(44)/RES/14, the General Conference requested the Secretariat ''within its available resources, to continue work on exploring options to strengthen the international nuclear safety arrangements for civil research reactors, taking due account of input from INSAG and the views of other relevant bodies''. A working group convened by the Secretariat pursuant to that request recommended that ''the Agency consider establishing an international action plan for research reactors'' and that the action plan include preparation of a Code of Conduct ''that would clearly establish the desirable attributes for management of research reactor safety''. In September 2001, the Board requested that the Secretariat develop and implement, in conjunction with Member States, an international research reactor safety enhancement plan which included preparation of a Code of Conduct on the Safety of Research Reactors. Subsequently, in resolution GC(45)/RES/10.A, the General Conference endorsed the Board's request. Pursuant to that request, a Code of Conduct on the Safety of Research Reactors was drafted at two meetings of an Open-ended Working Group of Legal and Technical Experts. This draft Code of Conduct was circulated to all Member States for comment. On the basis of the responses received, a revised draft of the Code was prepared by the Secretariat

48 CFR 32.202-3 - Conducting market research about financing terms.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Conducting market research... 32.202-3 Conducting market research about financing terms. Contract financing may be a subject included in the market research conducted in accordance with part 10. If market research for contract...

Conducting Research in Schools: A Practical Guide

Science.gov (United States)

Alibali, Martha W.; Nathan, Mitchell J.

2010-01-01

Cognitive development unfolds in many contexts, and one of the most important of these contexts is school. Thus, understanding the school context is critical for understanding development. This article discusses some of the reasons why cognitive developmental researchers might wish to conduct research in schools, describes how to get started…

Considerations when conducting e-Delphi research: a case study.

Science.gov (United States)

Toronto, Coleen

2017-06-22

Background E-Delphi is a way to access a geographically dispersed group of experts. It is similar to other Delphi methods but conducted online. E-research methodologies, such as the e-Delphi method, have yet to undergo significant critical discussion. Aim To highlight some of the challenges nurse researchers may wish to consider when using e-Delphi in their research. Discussion This paper provides details about the author's approach to conducting an e-Delphi study in which a group of health literacy nurse experts (n=41) used an online survey platform to identify and prioritise essential health literacy competencies for registered nurses. Conclusion This paper advances methodological discourse about e-Delphi by critically assessing an e-Delphi case study. The online survey platform used in this study was advantageous for the researcher and the experts: the experts could participate at any time and place where the internet was available; the researcher could efficiently access a national group of experts, track responses and analyse data in each round. Implications for practice E-Delphi studies create opportunities for nurse researchers to conduct research nationally and internationally. Before conducting an e-Delphi study, researchers should carefully consider the design and methods for collecting data, to avoid challenges that could potentially compromise the quality of the findings. Researchers are encouraged to publish details about their approaches to e-Delphi studies, to advance the state of the science.

Joint Research on Scatterometry and AFM Wafer Metrology

Science.gov (United States)

Bodermann, Bernd; Buhr, Egbert; Danzebrink, Hans-Ulrich; Bär, Markus; Scholze, Frank; Krumrey, Michael; Wurm, Matthias; Klapetek, Petr; Hansen, Poul-Erik; Korpelainen, Virpi; van Veghel, Marijn; Yacoot, Andrew; Siitonen, Samuli; El Gawhary, Omar; Burger, Sven; Saastamoinen, Toni

2011-11-01

Supported by the European Commission and EURAMET, a consortium of 10 participants from national metrology institutes, universities and companies has started a joint research project with the aim of overcoming current challenges in optical scatterometry for traceable linewidth metrology. Both experimental and modelling methods will be enhanced and different methods will be compared with each other and with specially adapted atomic force microscopy (AFM) and scanning electron microscopy (SEM) measurement systems in measurement comparisons. Additionally novel methods for sophisticated data analysis will be developed and investigated to reach significant reductions of the measurement uncertainties in critical dimension (CD) metrology. One final goal will be the realisation of a wafer based reference standard material for calibration of scatterometers.

Review of research on the hygrothermal environmental durability of structural adhesively bonded joints

Directory of Open Access Journals (Sweden)

Xiao HAN

2017-06-01

Full Text Available In recent years, structural adhesive bonding technology has been widely used in many industrial fields, with many advantages over traditional mechanical connection methods, such as riveting, welding and bolt connection. Due to the adhesive characteristics of polymer materials, the environmental durability of adhesive joint becomes the key problems in engineering structure connection feasibility and long-term service reliability. On the basis of the review of the research of the hot-humid environmental durability of structural adhesive joints, the effects of temperature, moisture and coupled condition on the structural mechanical behaviour are discussed, introducing the published research progress and results both at home and abroad. The prospects are provided: the future research work can be combined with a variety of observation scales of environmental aging test and numerical simulation method, delve into sub hygroscopic, creep, thermal expansion and hygroscopic expansion aging behavior, such as the environment of model prediction method simulation in more than a variety of mechanical performance degradation behavior of coupling conditions, and provide more reliable theoretical modeling and experimental data for engineering design and application of cementing structure.

CONCERT. ''European joint programme for the integration of radiation protection research''; CONCERT. Gemeinsame Europaeische Forschungsfoerderung

Energy Technology Data Exchange (ETDEWEB)

Schmitt-Hannig, A.; Birschwilks, M.; Jung, T. [Bundesamt fuer Strahlenschutz (Germany)

2016-07-01

CONCERT is a joint project of the EU and its member states which assume joint financing: Over the next five years the largest European radiation protection programme so far will have available about 28 Million Euros for research and integrative measures, whereby the European Commission will bear 70 per cent of the costs. Integrative measures include, among others, targeted vocational education and training of junior researchers in radiation protection, better access to research and irradiation facilities for scientists, as well as a stronger connection of universities and research centres in radiation protection research.

Joint Assessment of ETRR-2 Research Reactor Operations Program, Capabilities, and Facilities

International Nuclear Information System (INIS)

Bissani, M; O'Kelly, D S

2006-01-01

A joint assessment meeting was conducted at the Egyptian Atomic Energy Agency (EAEA) followed by a tour of Egyptian Second Research Reactor (ETRR-2) on March 22 and 23, 2006. The purpose of the visit was to evaluate the capabilities of the new research reactor and its operations under Action Sheet 4 between the U.S. DOE and the EAEA, ''Research Reactor Operation'', and Action Sheet 6, ''Technical assistance in The Production of Radioisotopes''. Preliminary Recommendations of the joint assessment are as follows: (1) ETRR-2 utilization should be increased by encouraging frequent and sustained operations. This can be accomplished in part by (a) Improving the supply-chain management for fresh reactor fuel and alleviating the perception that the existing fuel inventory should be conserved due to unreliable fuel supply; and (b) Promulgating a policy for sample irradiation priority that encourages the use of the reactor and does not leave the decision of when to operate entirely at the discretion of reactor operations staff. (2) Each experimental facility in operation or built for a single purpose should be reevaluated to focus on those that most meet the goals of the EAEA strategic business plan. Temporary or long-term elimination of some experimental programs might be necessary to provide more focused utilization. There may be instances of emerging reactor applications for which no experimental facility is yet designed or envisioned. In some cases, an experimental facility may have a more beneficial use than the purpose for which it was originally designed. For example, (a) An effective Boron Neutron Capture Therapy (BNCT) program requires nearby high quality medical facilities. These facilities are not available and are unlikely to be constructed near the Inshas site. Further, the BNCT facility is not correctly designed for advanced research and therapy programs using epithermal neutrons. (b) The ETRR-2 is frequently operated to provide color-enhanced gemstones but is

Joint Assessment of ETRR-2 Research Reactor Operations Program, Capabilities, and Facilities

Energy Technology Data Exchange (ETDEWEB)

Bissani, M; O' Kelly, D S

2006-05-08

A joint assessment meeting was conducted at the Egyptian Atomic Energy Agency (EAEA) followed by a tour of Egyptian Second Research Reactor (ETRR-2) on March 22 and 23, 2006. The purpose of the visit was to evaluate the capabilities of the new research reactor and its operations under Action Sheet 4 between the U.S. DOE and the EAEA, ''Research Reactor Operation'', and Action Sheet 6, ''Technical assistance in The Production of Radioisotopes''. Preliminary Recommendations of the joint assessment are as follows: (1) ETRR-2 utilization should be increased by encouraging frequent and sustained operations. This can be accomplished in part by (a) Improving the supply-chain management for fresh reactor fuel and alleviating the perception that the existing fuel inventory should be conserved due to unreliable fuel supply; and (b) Promulgating a policy for sample irradiation priority that encourages the use of the reactor and does not leave the decision of when to operate entirely at the discretion of reactor operations staff. (2) Each experimental facility in operation or built for a single purpose should be reevaluated to focus on those that most meet the goals of the EAEA strategic business plan. Temporary or long-term elimination of some experimental programs might be necessary to provide more focused utilization. There may be instances of emerging reactor applications for which no experimental facility is yet designed or envisioned. In some cases, an experimental facility may have a more beneficial use than the purpose for which it was originally designed. For example, (a) An effective Boron Neutron Capture Therapy (BNCT) program requires nearby high quality medical facilities. These facilities are not available and are unlikely to be constructed near the Inshas site. Further, the BNCT facility is not correctly designed for advanced research and therapy programs using epithermal neutrons. (b) The ETRR-2 is frequently operated to

Ecotoxicology in Baden-Wuerttemberg. Research profile and possible joint research projects; Oekotoxikologie in Baden-Wuerttemberg. Forschungsprofil und moegliche Forschungsverbuende

Energy Technology Data Exchange (ETDEWEB)

Flaig, H.; Lohmann, U.; Ballschmiter, K.; Deissler, A.; Froescheis, O.; Kochte-Clemens, B.

2000-07-01

In 1996 the 'Landesforschungsbeirat Baden-Wuerttemberg' (Research Council of the Federal State) recommended a critical inventory of ecotoxicological research activities in Baden-Wuerttemberg in order to get a clearly defined orientation as well as a promotion of research. Assigned by the Ministry of Science, Research and Arts Baden-Wuerttemberg, the Center of Technology Assessment (Center of TA) designed and performed a project 'The Research Profile of Ecotoxicology in Baden-Wuerttemberg' with a focus on universities. Research activities in the federal state were registered, documented, and classified. In two round table discussions with experts from university and non-university research institutions, chemical industry, and ministries, the concept of the Center of TA for joint research projects in the field of ecotoxicology in Baden-Wuerttemberg was put in concrete terms. Joint research projects beyond university boundaries are presumably the most promising tool for ecotoxicology to grain profile as a discipline. Ideally, the strong points of several subjects should be combined; thus, creating synergy effects and enabling a comprehensive view of the research topic. We assume some organizational preconditions to be necessary for joint projects in order to be successful. Apart from a tight coordination, integrating measures are particularly important. Thus, a project should be obligatorily performed by at least one representative of environmental chemistry and one representative of research on biological effects. Financial means must be assigned, too, e.g. for the exchange of scientists and joint seminars, workshops or conferences. It should be checked thoroughly whether the 'Transregio'-program of the 'Deutsche Forschungsgemeinschaft' could serve as a model for implementing these integrating measures. Moreover, the results of the different working groups should be regularly combined and condensed to a comprehensive view of

On-Going International Research Program on Irradiated Concrete Conducted by DOE, EPRI and Japan Research Institutions. Roadmap, Achievements and Path Forward

Energy Technology Data Exchange (ETDEWEB)

Le Pape, Yann [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Rosseel, Thomas M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2015-10-01

The Joint Department of Energy (DOE)-Electric Power Research Institute (EPRI) Program (Light Water Reactor Sustainability (LWRS) Program–Material Pathway–Concrete and Long-Term Operation (LTO) Program) and US Nuclear Regulatory Commission (NRC) research studies aim at understanding the most prominent degradation modes and their effects on the long-term operation of concrete structures to nuclear power generation. Based on the results of the Expanded Materials Degradation Analysis (EMDA), (NUREG/CR-7153, ORNL/TM-2011/545), irradiated concrete and alkali-silica reaction (ASR)-affected concrete structures are the two prioritized topics of on-going research. This report focuses specifically on the topic of irradiated concrete and summarizes the main accomplishments obtained by this joint program, but also provides an overview of current relevant activities domestically and internationally. Possible paths forward are also suggested to help near-future orientation of this program.

On-Going International Research Program on Irradiated Concrete Conducted by DOE, EPRI and Japan Research Institutions. Roadmap, Achievements and Path Forward

International Nuclear Information System (INIS)

Le Pape, Yann; Rosseel, Thomas M.

2015-01-01

The Joint Department of Energy (DOE)-Electric Power Research Institute (EPRI) Program (Light Water Reactor Sustainability (LWRS) Program Material Pathway Concrete and Long-Term Operation (LTO) Program) and US Nuclear Regulatory Commission (NRC) research studies aim at understanding the most prominent degradation modes and their effects on the long-term operation of concrete structures to nuclear power generation. Based on the results of the Expanded Materials Degradation Analysis (EMDA), (NUREG/CR-7153, ORNL/TM-2011/545), irradiated concrete and alkali-silica reaction (ASR)-affected concrete structures are the two prioritized topics of on-going research. This report focuses specifically on the topic of irradiated concrete and summarizes the main accomplishments obtained by this joint program, but also provides an overview of current relevant activities domestically and internationally. Possible paths forward are also suggested to help near-future orientation of this program.

Passion Research: A Joint Venture To Interest High School Students in Chemistry.

Science.gov (United States)

Carriere, Francois J.; Abouaf, Madeleine

1997-01-01

Describes a joint venture between the Centre National de la Recherche Scientifique (CNRS) and the Department of Education in France that was created to allow students to do practical scientific work with the help of a CNRS researcher. Presents two practical projects done by students on organic polymers and on color. Concludes that this increases…

Operation of the joint panel on occupational and environmental research for uranium production in Canada

International Nuclear Information System (INIS)

Stocker, H.; Duport, P.J.; Brown, L.D.

1993-07-01

The Joint Panel, formed in 1976, is a Canadian organization (composed of federal and provincial government departments and agencies, uranium mining companies, labour unions, and non-profit research institutions) whose members have voluntarily agreed to share information regarding planned, ongoing and completed research on the effects of uranium (and thorium) production on the radiological health and safety of workers and on the environment. The objectives of the Joint Panel are: the identification of areas (within its purview of interest) where research is required; the stimulation of research in areas where the needs have been identified; the dissemination of subsequent research results; and, the avoidance of unnecessary duplication in research activities. The operation of this unique organization permits a free and open discussion of a wide variety of research activities, draws upon its member institutions to form working groups for the preparation of technical documents, and complements its more formal business sessions with technical presentations on topics of current interest. Copies of reports of completed research are maintained by a secretariat, which also issues the minutes of all meetings as well as the annual reports

Paper use in research ethics applications and study conduct.

Science.gov (United States)

Chakladar, Abhijoy; Eckstein, Sue; White, Stuart M

2011-02-01

Application for Research Ethics Committee (REC) approval and the conduct of medical research is paper intensive. This retrospective study examined all applications to a single REC in the south of England over one year. It estimated the mass of paper used, comparing the proportional paper consumption of different trial types and during different stages of the research process, quantifying the consumption in terms of carbon dioxide emissions. In 2009, 68 trials were submitted to the REC. Total paper consumption for the REC process and study conduct was 176,150 sheets of A4 paper (879 kg), equivalent to an estimated 11.5 million sheets (88 tonnes, 2100 trees) a year for the U.K.; the REC process accounted for 26.4%. REC applications and the conduct of approved trials generate considerable environmental impact through paper consumption contributing to the NHS's carbon footprint. Paper use might be reduced through the implementation of digital technologies and revised research methods, namely changing attitudes in both researchers and ethics committees.

Joint Assessment of Renewable Energy and Water Desalination Research Center (REWDC) Program Capabilities and Facilities In Radioactive Waste Management

International Nuclear Information System (INIS)

Bissani, M; Fischer, R; Kidd, S; Merrigan, J

2006-01-01

The primary goal of this visit was to perform a joint assessment of the Renewable Energy and Water Desalination Center's (REWDC) program in radioactive waste management. The visit represented the fourth technical and scientific interaction with Libya under the DOE/NNSA Sister Laboratory Arrangement. Specific topics addressed during the visit focused on Action Sheet P-05-5, ''Radioactive Waste Management''. The Team, comprised of Mo Bissani (Team Lead), Robert Fischer, Scott Kidd, and Jim Merrigan, consulted with REWDC management and staff. The team collected information, discussed particulars of the technical collaboration and toured the Tajura facility. The tour included the waste treatment facility, waste storage/disposal facility, research reactor facility, hot cells and analytical labs. The assessment team conducted the first phase of Task A for Action Sheet 5, which involved a joint assessment of the Radioactive Waste Management Program. The assessment included review of the facilities dedicated to the management of radioactive waste at the Tourja site, the waste management practices, proposed projects for the facility and potential impacts on waste generation and management

Harmonization in preclinical epilepsy research: A joint AES/ILAE translational initiative.

Science.gov (United States)

Galanopoulou, Aristea S; French, Jacqueline A; O'Brien, Terence; Simonato, Michele

2017-11-01

Among the priority next steps outlined during the first translational epilepsy research workshop in London, United Kingdom (2012), jointly organized by the American Epilepsy Society (AES) and the International League Against Epilepsy (ILAE), are the harmonization of research practices used in preclinical studies and the development of infrastructure that facilitates multicenter preclinical studies. The AES/ILAE Translational Task Force of the ILAE has been pursuing initiatives that advance these goals. In this supplement, we present the first reports of the working groups of the Task Force that aim to improve practices of performing rodent video-electroencephalography (vEEG) studies in experimental controls, generate systematic reviews of preclinical research data, and develop preclinical common data elements (CDEs) for epilepsy research in animals. Wiley Periodicals, Inc. © 2017 International League Against Epilepsy.

Joint nuclear safety research projects between the US and Russian Federation International Nuclear Safety Centers

International Nuclear Information System (INIS)

Bougaenko, S.E.; Kraev, A.E.; Hill, D.L.; Braun, J.C.; Klickman, A.E.

1998-01-01

The Russian Federation Ministry for Atomic Energy (MINATOM) and the US Department of Energy (USDOE) formed international Nuclear Safety Centers in October 1995 and July 1996, respectively, to collaborate on nuclear safety research. Since January 1997, the two centers have initiated the following nine joint research projects: (1) INSC web servers and databases; (2) Material properties measurement and assessment; (3) Coupled codes: Neutronic, thermal-hydraulic, mechanical and other; (4) Severe accident management for Soviet-designed reactors; (5) Transient management and advanced control; (6) Survey of relevant nuclear safety research facilities in the Russian Federation; (8) Advanced structural analysis; and (9) Development of a nuclear safety research and development plan for MINATOM. The joint projects were selected on the basis of recommendations from two groups of experts convened by NEA and from evaluations of safety impact, cost, and deployment potential. The paper summarizes the projects, including the long-term goals, the implementing strategy and some recent accomplishments for each project

Computer Assisted Surgery and Current Trends in Orthopaedics Research and Total Joint Replacements

Science.gov (United States)

Amirouche, Farid

2008-06-01

Musculoskeletal research has brought about revolutionary changes in our ability to perform high precision surgery in joint replacement procedures. Recent advances in computer assisted surgery as well better materials have lead to reduced wear and greatly enhanced the quality of life of patients. The new surgical techniques to reduce the size of the incision and damage to underlying structures have been the primary advance toward this goal. These new techniques are known as MIS or Minimally Invasive Surgery. Total hip and knee Arthoplasties are at all time high reaching 1.2 million surgeries per year in the USA. Primary joint failures are usually due to osteoarthristis, rheumatoid arthritis, osteocronis and other inflammatory arthritis conditions. The methods for THR and TKA are critical to initial stability and longevity of the prostheses. This research aims at understanding the fundamental mechanics of the joint Arthoplasty and providing an insight into current challenges in patient specific fitting, fixing, and stability. Both experimental and analytical work will be presented. We will examine Cementless total hip arthroplasty success in the last 10 years and how computer assisted navigation is playing in the follow up studies. Cementless total hip arthroplasty attains permanent fixation by the ingrowth of bone into a porous coated surface. Loosening of an ingrown total hip arthroplasty occurs as a result of osteolysis of the periprosthetic bone and degradation of the bone prosthetic interface. The osteolytic process occurs as a result of polyethylene wear particles produced by the metal polyethylene articulation of the prosthesis. The total hip arthroplasty is a congruent joint and the submicron wear particles produced are phagocytized by macrophages initiating an inflammatory cascade. This cascade produces cytokines ultimately implicated in osteolysis. Resulting bone loss both on the acetabular and femoral sides eventually leads to component instability. As

Elastic dynamic research of high speed multi-link precision press considering structural stiffness of rotation joints

Energy Technology Data Exchange (ETDEWEB)

Hu, Feng Feng; Sun, Yu; Peng, Bin Bin [School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing (China)

2016-10-15

An elastic dynamic model of high-speed multi-link precision press considering structural stiffness of rotation joints was established by the finite element method. In the finite element model, rotation joint was established by four bar elements with equivalent stiffness, and connected link was established by beam element. Then, the elastic dynamics equation of the system was established, and modal superposition method was used to solve the dynamic response. Compared with the traditional elastic dynamic model with perfect constraint of the rotation joints, the elastic dynamic response value of the improved model is larger. To validate the presented new method of elastic dynamics analysis with stiffness of rotation joints, a related test of slider Bottom dead center (BDC) position in different speed was designed. The test shows that the model with stiffness of rotation joints is more reasonable. So it provides a reasonable theory and method for dynamic characteristics research of such a multi-link machine.

Recent Corrosion Research Trends in Weld Joints

International Nuclear Information System (INIS)

Kim, Hwan Tae; Kil, Sang Cheol; Hwang, Woon Suk

2007-01-01

The increasing interest in the corrosion properties of weld joints in the corrosive environment is placing stringent demands on the manufacturing techniques and performance requirements, and the manufacture employs the high quality and efficiency welding process to produce welds. Welding plays an important role in the fabrication of chemical plants, nuclear power plant, ship construction, and this has led to an increasing attention to the corrosion resistant weld joints. This paper covers recent technical trends of welding technologies for corrosion resistance properties including the COMPENDEX DB analysis of welding materials, welding process, and welding fabrications

Proceedings of the seminar on the joint research project between JAERI and Universities. 'Actinide researches for 21st century - fusion between chemistry and engineering'. August 20-21, 1999, Japan Atomic Energy Research Inst., Tokai, Japan

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-06-01

The Seminar on the Joint Research Project between JAERI and Universities was held in Tokai, August 20-21, 1999, to discuss future perspectives of the actinide researches for the nuclear fuel cycle. The papers related to the Joint Research Project on the Backend Chemistry were presented and discussed. The present report complies the papers contributed to the Seminar. (author)

Getting started in research: designing and preparing to conduct a research study.

Science.gov (United States)

Macfarlane, Matthew D; Kisely, Steve; Loi, Samantha; Macfarlane, Stephen; Merry, Sally; Parker, Stephen; Power, Brian; Siskind, Dan; Smith, Geoff; Looi, Jeffrey C

2015-02-01

To discuss common pitfalls and useful tips in designing a quantitative research study, the importance and process of ethical approval, and consideration of funding. Through careful planning, based on formulation of a research question, early career researchers can design and conduct quantitative research projects within the framework of the Scholarly Project or in their own independent projects. © The Royal Australian and New Zealand College of Psychiatrists 2014.

Conducting Quantitative Medical Education Research: From Design to Dissemination.

Science.gov (United States)

Abramson, Erika L; Paul, Caroline R; Petershack, Jean; Serwint, Janet; Fischel, Janet E; Rocha, Mary; Treitz, Meghan; McPhillips, Heather; Lockspeiser, Tai; Hicks, Patricia; Tewksbury, Linda; Vasquez, Margarita; Tancredi, Daniel J; Li, Su-Ting T

2018-03-01

Rigorous medical education research is critical to effectively develop and evaluate the training we provide our learners. Yet many clinical medical educators lack the training and skills needed to conduct high-quality medical education research. We offer guidance on conducting sound quantitative medical education research. Our aim is to equip readers with the key skills and strategies necessary to conduct successful research projects, highlighting new concepts and controversies in the field. We utilize Glassick's criteria for scholarship as a framework to discuss strategies to ensure that the research question of interest is worthy of further study and how to use existing literature and conceptual frameworks to strengthen a research study. Through discussions of the strengths and limitations of commonly used study designs, we expose the reader to particular nuances of these decisions in medical education research and discuss outcomes generally focused on, as well as strategies for determining the significance of consequent findings. We conclude with information on critiquing research findings and preparing results for dissemination to a broad audience. Practical planning worksheets and comprehensive tables illustrating key concepts are provided in order to guide researchers through each step of the process. Medical education research provides wonderful opportunities to improve how we teach our learners, to satisfy our own intellectual curiosity, and ultimately to enhance the care provided to patients. Copyright © 2018 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

Breaking the Biological Barriers to Cellulosic Ethanol: A Joint Research Agenda

Energy Technology Data Exchange (ETDEWEB)

Houghton, John [Dept. of Energy (DOE), Washington DC (United States); Weatherwax, Sharlene [Dept. of Energy (DOE), Washington DC (United States); Ferrell, John [Dept. of Energy (DOE), Washington DC (United States)

2006-06-07

The Biomass to Biofuels Workshop, held December 7–9, 2005, was convened by the Department of Energy’s Office of Biological and Environmental Research in the Office of Science; and the Office of the Biomass Program in the Office of Energy Efficiency and Renewable Energy. The purpose was to define barriers and challenges to a rapid expansion of cellulosic-ethanol production and determine ways to speed solutions through concerted application of modern biology tools as part of a joint research agenda. Although the focus was ethanol, the science applies to additional fuels that include biodiesel and other bioproducts or coproducts having critical roles in any deployment scheme.

Evaluation of the fusion technology and safety programme of the Joint Research Centre (1980-85)

International Nuclear Information System (INIS)

Haines, M.; Cabibbo, N.; Crocker, J.G.; Lecomte, M.; Merz, E.

1986-01-01

The Joint Research Centre, Ispra, has been involved in fusion research since 1973. In July 1985 the Commission of European Communities - DG XII, following a policy of systematically evaluating its RandD activities, appointed a panel of external experts to evaluate the fusion technology and safety programme carried out at the Joint Research Centre. This report describes the work of the panel in evaluating the research performed by the JRC within the framework of its 1984-87 programme. The achievements of the previous programme, 1980-83, were also taken into consideration. The different research areas covered in the programme, i.e.: reactor studies, breeding blanket technology, structural materials studies, risk assessment and tritium laboratory studies, are described and a draft proposal for the period 1987-90 presented. The evaluation panel has been asked to assess the following aspects: the scientific and technical achievements of the programme, the contribution of the programme to the development of other Community policies, the role played by the JRC in the European fusion research (including NET) and in international collaborations such as INTOR. From its assessment the evaluation panel has made a series of recommendations for the current programme and for future work

25 years of the Joint Institute for Nuclear Research in Dubna and Czechoslovakia's part in its activities

International Nuclear Information System (INIS)

Simane, C.; Tucek, J.

1981-01-01

The main tasks and results attained by the individual units of the Joint Institute for Nuclear Research in Dubna are briefly described: by the high energy laboratory, the nuclear problems laboratory, the laboratory of theoretical physics, the laboratory of neutron physics, the laboratory of nuclear reactions, the laboratory of computer technology and automation, and by the unit responsible for the implementation of the project for accelerators of positively charged ions based on the principle of collective acceleration using electron rings. Czechoslovakia contributes approximately 6% to the financing of the Institute. Also briefly described are the main fields of cooperation between Czechoslovak research institutes and the laboratories of the Joint Institute for Nuclear Research. (Z.M.)

75 FR 25294 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Joint Venture To...

Science.gov (United States)

2010-05-07

... Production Act of 1993--Joint Venture To Perform Project Entitled Versatile Onboard Traffic Embedded Roaming... Cooperative Research and Production Act of 1993, 15 U.S.C. 4301 et seq. (``the Act''), Joint Venture to..., Trilion Quality Systems, Plymouth Meeting, PA, has been added as a party to this venture. Also, Witten...

Conducting research literature reviews from the internet to the paper

CERN Document Server

Fink, Arlene

2014-01-01

Providing readers with an accessible, in-depth look at how to synthesize research literature, Conducting Research Literature Reviews is perfect for students, researchers, marketers, planners, and policymakers who design and manage public and private agencies, conduct research studies, and prepare strategic plans and grant proposals. Bestselling author Arlene Fink shows readers how to explain the need for and significance of research, as well as how to explain a study’s findings. Offering a step-by-step approach to conducting literature reviews, the Fourth Edition features updated examples and covers: how to select databases and evaluate their quality; selecting and organizing key words and other terms in order to effectively search databases and the Web; setting standards for evaluating the quality of research and other literature; extracting and recording information from articles and studies; synthesizing what the reader finds either descriptively or via a meta-analysis; recording and storing the results ...

A proposal for ethical research conduct in Madagascar | Wilmé ...

African Journals Online (AJOL)

Ethical conducts are gaining importance in times of increased globalization and research efforts. This paper presents a code of ethical conduct for researchers who plan to publish their studies with the journal Madagascar Conservation & Development. This paper will be subject to continuous adaptations and discussions.

SNU-KAERI Degree and Research Center for Radiation Convergence Sciences

International Nuclear Information System (INIS)

Jo, Sungkee; Kim, S. U.; Roh, C. H

2011-12-01

In this study, we tried to establish and perform the demonstrative operation of the 'Degree and Research Center for Radiation Convergence Sciences' to raise the Korea's technology competitiveness. As results of this project we got the successful accomplishment as below: 1. Operation of Degree and Research Center for Radiation Convergence Sciences and establishment of expert researcher training system Ο Presentation of an efficient model for expert researcher training program through the operation of university-institute collaboration courses by combining of Graduate course and DRC system. Ο Radiation Convergence Sciences major is scheduled to be established in 2013 at SNU Graduate School of Convergence Science and Technology Ο A big project for research, education, and training of radiation convergence science is under planning 2. Establishment and conduction of joint research by organization of radiation convergence research consortium · Joint research was conducted in close connection with the research projects of researchers participating in this DRC project (44 articles published in journals, 6 patents applied, 88 papers presented in conferences) · The resources of the two organization (SNU and KAERI), such as research infrastructure (hightech equipment and etc), manpower (professor/researcher), and original technology and know how were utilized to conduct the joint research and to establish the collaboration system of the two organizations

Research Review: DSM-V Conduct Disorder--Research Needs for an Evidence Base

Science.gov (United States)

Moffitt, Terrie E.; Arseneault, Louise; Jaffee, Sara R.; Kim-Cohen, Julia; Koenen, Karestan C.; Odgers, Candice L.; Slutske, Wendy S.; Viding, Essi

2008-01-01

This article charts a strategic research course toward an empirical foundation for the diagnosis of conduct disorder in the forthcoming DSM-V. Since the DSM-IV appeared in 1994, an impressive amount of new information about conduct disorder has emerged. As a result of this new knowledge, reasonable rationales have been put forward for adding to…

APPLICATION PROSPECTS OF THREADED JOINT OF ARMATURE

Directory of Open Access Journals (Sweden)

A. V. Radkevych

2014-06-01

Full Text Available Purpose. One of the main technological operations of buildings construction on the basis of monolithic frame systems is the production of mesh reinforcement. The current interest is the new ways specification of advanced bonding armature techniques without reliability weakness and design of the building in whole, as well as the finding of use prospects of screw-threaded joint of armature as the most technological and economic method of re-bars joints. Methodology. Advantages and disadvantages analysis of existing rebar compound technologies was implemented by couplings of different types and constructions. The most promising vertical constructions for the vertical bars joints in frameworks were determined. Findings. Researches of existing technologies of rebar joints by the couplings of different construction were carried out. The installation method of mesh reinforcement of vertical structural elements with the use of the special catching devices was developed. It allows considerably accelerating installation of mesh reinforcement. Originality. Regularity of labor intensiveness change of mesh reinforcement installation of columns at armature joint in vertical position by threaded couplings with the help of catching devices using special construction was determined. This allows substantially reducing the labor expenditures during installation of these elements. Dependency of labor intensiveness and cost of lap welding armature joints, by tub-seam welding and by thread coupling depending on its diameter was designated. Regularity of labor intensiveness changes of installation at armature joints by different methods taking into account preparatory works was defined. Practical value. The analysis of mechanical armature joints techniques was conducted. It will allow selecting methods of armature joints to increase the speed of construction works more economical and effective.

The Joint Institute for Nuclear Research in Experimental Physics of Elementary Particles

Science.gov (United States)

Bednyakov, V. A.; Russakovich, N. A.

2018-05-01

The year 2016 marks the 60th anniversary of the Joint Institute for Nuclear Research (JINR) in Dubna, an international intergovernmental organization for basic research in the fields of elementary particles, atomic nuclei, and condensed matter. Highly productive advances over this long road clearly show that the international basis and diversity of research guarantees successful development (and maintenance) of fundamental science. This is especially important for experimental research. In this review, the most significant achievements are briefly described with an attempt to look into the future (seven to ten years ahead) and show the role of JINR in solution of highly important problems in elementary particle physics, which is a fundamental field of modern natural sciences. This glimpse of the future is full of justified optimism.

Jointly working on research for the energies of the future. Objectives of research; Gemeinsam forschen fuer die Energie der Zukunft. Forschungsziele

Energy Technology Data Exchange (ETDEWEB)

Stadermann, G.; Szczepanski, P. (comps.)

2006-07-01

The booklet consists of chapters and various articles: Doing research work with joint efforts; R and D - political objectives of FVS; fields of research and development; electrical system techniques; network management and separated power plants; heat and coolness from renewable energies; solar construction works: building covers and system techniques; generating and utilizing chemical energy sources from renewable energies; estimating consequences of techniques.

Thermal contact resistance measurement of conduction cooled binary current lead joint block in cryocooler based self field I-V characterization facility

Energy Technology Data Exchange (ETDEWEB)

Kundu, Ananya, E-mail: ananya@ipr.res.in; Das, Subrat Kumar; Agarwal, Anees Bano Pooja; Pradhan, Subrata [Institute for Plasma Research, Bhat, Gandhinagar, Gujarat 382428 (India)

2016-05-23

In the present study thermal resistance of conduction cooled current lead joint block employing two different interfacial material namely AlN sheet and Kapton Film have been studied in the temperature range 5K-35K. In each case, the performance of different interlayer materials e.g. Indium foil for moderately pressurized contacts (contact pressure <1 MPa), and Apiezon N Grease, GE varnish for low pressurized contact (contact pressure <1 MPa) is studied. The performances of AlN joint with Indium foil and with Apeizon N Grease are studied and it is observed that the contact resistance reduces more with indium foil as compared to greased contact. The contact resistance measurements of Kapton film with Apiezon N grease and with GE varnish were also carried out in the same temperature range. A comparative study of AlN joint with Indium foil and Kapton with GE varnish as filler material is carried out to demonstrate better candidate material among Kapton and AlN for a particular filler material in the same temperature range.

Research Progress in Graphene/Rubber Conducting Nanocomposites

Directory of Open Access Journals (Sweden)

DONG Hui-min

2017-03-01

Full Text Available The conductive mechanism of graphene/rubber nanocomposites was introduced.Advances in the synthesis and properties of graphene and its derivatives, modifications of graphene, along with its hybrid fillers, as well as fabrication of related rubber conducting nanocomposites were reviewed.Many factors affecting the electrical properties, such as fabrication method, vulcanization, temperature, pressure, frequency and media etc. were also summarized.It was pointed out that the further research should be focused on multi-component graphene/rubber nanocomposites and its double percolation phenomenon.

Community researchers conducting health disparities research: Ethical and other insights from fieldwork journaling.

Science.gov (United States)

Mosavel, Maghboeba; Ahmed, Rashid; Daniels, Doria; Simon, Christian

2011-07-01

Lay persons who are trained to conduct research in their own communities form an essential part of many research projects. However, the effects of conducting research in their own communities have not been adequately explored. This paper examines the experiences, perceptions, and challenges faced by a group of community researchers during their involvement in a research project that examined if, and how, the relationships between mothers and their adolescent daughters could be harnessed to develop a daughter-initiated cervical cancer intervention. Seven community researchers interviewed 157 mother-daughter pairs in Cape Town, South Africa. We examine the use of journaling as a tool to document the experiences of community researchers, and we consider how journaling may help the community-based researcher grapple with the research process, and, more broadly, what such journal content illustrates with respect to the nature and challenges of community-engaged health research. An analysis of the content of the journals provides a strong indication of how personal and intimate the research process can be for community researchers by virtue of the background that they bring into the process as well as the additional weight of the research process itself. The complexities of navigating dual and somewhat oppositional roles - the role of impartial scientist or researcher and the role of invested community person - has been both underestimated and insufficiently researched. Copyright © 2011 Elsevier Ltd. All rights reserved.

Ethical conduct for research : a code of scientific ethics

Science.gov (United States)

Marcia Patton-Mallory; Kathleen Franzreb; Charles Carll; Richard Cline

2000-01-01

The USDA Forest Service recently developed and adopted a code of ethical conduct for scientific research and development. The code addresses issues related to research misconduct, such as fabrication, falsification, or plagiarism in proposing, performing, or reviewing research or in reporting research results, as well as issues related to professional misconduct, such...

First Joint Workshop on Energy Management for Large-Scale Research Infrastructures

CERN Document Server

2011-01-01

  CERN, ERF (European Association of National Research Facilities) and ESS (European Spallation Source) announce the first Joint Workshop on Energy Management for Large-Scale Research Infrastructures. The event will take place on 13-14 October 2011 at the ESS office in Sparta - Lund, Sweden.   The workshop will bring together international experts on energy and representatives from laboratories and future projects all over the world in order to identify the challenges and best practice in respect of energy efficiency and optimization, solutions and implementation as well as to review the challenges represented by potential future technical solutions and the tools for effective collaboration. Further information at: http://ess-scandinavia.eu/general-information

23 science societies issue joint call for more federal research dollars

Science.gov (United States)

Carlowicz, Michael

In an unprecedented demonstration of unity, the leaders of 23 American scientific societies and umbrella organizations gathered on March 4 in Washington, D.C., to press the U.S. federal government for increased funding for scientific research and to make an investment in the nation's future. In a “Joint Statement on Scientific Research” addressed to President Bill Clinton and the Congress, the presidents of learned societies representing more than one million scientists, mathematicians, and engineers asked the government “to renew the nation's historical commitment to scientific research and education,” and to reverse the decline of federal investment in science and engineering. The American Geophysical Union was one of the signatories of the statement.

WHO/IAEA joint research programme on trace elements in cardiovascular diseases

International Nuclear Information System (INIS)

1980-03-01

After several years of support by WHO and IAEA for the joint research programme on trace elements in cardiovascular diseases, a consultants' meeting was held (1) to examine the present status of the programme with a view to advising on actions necessary for its completion, and (2) to advise on the form, content and timing of a final report. The meeting was attended by the invited experts and other persons. The main work of this research programme is divided, as before, between two projects, (1) on Cd, Cr, Cu, Se, Zn and other elements in relation to ischaemic heart disease, and (2) on Cd, Se and Zn in relation to arterial hypertension

Using Electronic Mail to Conduct Survey Research.

Science.gov (United States)

Thach, Liz

1995-01-01

Describes public and private online networks and the characteristics of electronic mail. Reviews the literature on survey research conducted via electronic mail, and examines the issues of design, implementation, and response. A table displays advantages and disadvantages of electronic mail surveys. (AEF)

Functionally Graded Adhesives for Composite Joints

Science.gov (United States)

Stapleton, Scott E.; Waas, Anthony M.; Arnold, Steven M.

2012-01-01

Adhesives with functionally graded material properties are being considered for use in adhesively bonded joints to reduce the peel stress concentrations located near adherend discontinuities. Several practical concerns impede the actual use of such adhesives. These include increased manufacturing complications, alterations to the grading due to adhesive flow during manufacturing, and whether changing the loading conditions significantly impact the effectiveness of the grading. An analytical study is conducted to address these three concerns. An enhanced joint finite element, which uses an analytical formulation to obtain exact shape functions, is used to model the joint. Furthermore, proof of concept testing is conducted to show the potential advantages of functionally graded adhesives. In this study, grading is achieved by strategically placing glass beads within the adhesive layer at different densities along the joint.

Commission of the european communities. Joint research centre. Petten Establishment. Annual Report 1977

International Nuclear Information System (INIS)

1977 marked the beginning of a new multiannual research programme for the European Commission's Joint research Centre. Regarding the exploitation of HFR (High Flux Reactor), the year was one of steady, on-schedule operation with high utilization, although this fell off slightly in the autumn due to overloading of our capsule project engineering team and manufacturing services. We are pleased to note that the HFR Users' Meeting, held in October, drew about 100 participants from Europe and America and demonstrated a lively interest in the Commission's materials testing reactor. Technical improvements to the plant are being examined as one means of maintaining or even increasing this interest in the 1980's. Following the wishes of the Council of Ministers, new Advisory Committees for Programme Management have been set up for all the Joint Research Centre's activities and those for HFR and High Temperature Materials Programmes have met at Petten. This latter Committee is entirely new to its task, the programme having been served until 1977 by a number of ad hoc meetings of national experts. The work of the Organic Chemistry Laboratory falls under the wings of the Community Reference Bureau Advisory Committee, who have met in Brussels and strongly encouraged the development of the activity

Guidance for Researchers Developing and Conducting Clinical Trials in Practice-based Research Networks (PBRNs)

Science.gov (United States)

Dolor, Rowena J.; Schmit, Kristine M.; Graham, Deborah G.; Fox, Chester H.; Baldwin, Laura Mae

2015-01-01

Background There is increased interest nationally in multicenter clinical trials to answer questions about clinical effectiveness, comparative effectiveness, and safety in real-world community settings. Primary care practice-based research networks (PBRNs), comprising community- and/or academically affiliated practices committed to improving medical care for a range of health problems, offer ideal settings for these trials, especially pragmatic clinical trials. However, many researchers are not familiar with working with PBRNs. Methods Experts in practice-based research identified solutions to challenges that researchers and PBRN personnel experience when collaborating on clinical trials in PBRNs. These were organized as frequently asked questions in a draft document presented at a 2013 Agency for Health care Research and Quality PBRN conference workshop, revised based on participant feedback, then shared with additional experts from the DARTNet Institute, Clinical Translational Science Award PBRN, and North American Primary Care Research Group PBRN workgroups for further input and modification. Results The “Toolkit for Developing and Conducting Multi-site Clinical Trials in Practice-Based Research Networks” offers guidance in the areas of recruiting and engaging practices, budgeting, project management, and communication, as well as templates and examples of tools important in developing and conducting clinical trials. Conclusion Ensuring the successful development and conduct of clinical trials in PBRNs requires a highly collaborative approach between academic research and PBRN teams. PMID:25381071

Estimation of ground reaction forces and joint moments on the basis on plantar pressure insoles and wearable sensors for joint angle measurement.

Science.gov (United States)

Ostaszewski, Michal; Pauk, Jolanta

2018-05-16

Gait analysis is a useful tool medical staff use to support clinical decision making. There is still an urgent need to develop low-cost and unobtrusive mobile health monitoring systems. The goal of this study was twofold. Firstly, a wearable sensor system composed of plantar pressure insoles and wearable sensors for joint angle measurement was developed. Secondly, the accuracy of the system in the measurement of ground reaction forces and joint moments was examined. The measurements included joint angles and plantar pressure distribution. To validate the wearable sensor system and examine the effectiveness of the proposed method for gait analysis, an experimental study on ten volunteer subjects was conducted. The accuracy of measurement of ground reaction forces and joint moments was validated against the results obtained from a reference motion capture system. Ground reaction forces and joint moments measured by the wearable sensor system showed a root mean square error of 1% for min. GRF and 27.3% for knee extension moment. The correlation coefficient was over 0.9, in comparison with the stationary motion capture system. The study suggests that the wearable sensor system could be recommended both for research and clinical applications outside a typical gait laboratory.

Infants’ Early Visual Attention and Social Engagement as Developmental Precursors to Joint Attention

Science.gov (United States)

Salley, Brenda; Sheinkopf, Stephen J.; Neal-Beevers, A. Rebecca; Tenenbaum, Elena J.; Miller-Loncar, Cynthia L.; Tronick, Ed; Lagasse, Linda L.; Shankaran, Seetha; Bada, Henrietta; Bauer, Charles; Whitaker, Toni; Hammond, Jane; Lester, Barry M.

2016-01-01

This study examined infants’ early visual attention (at 1 month of age) and social engagement (4 months) as predictors of their later joint attention (12 and 18 months). The sample (n=325), drawn from the Maternal Lifestyle Study, a longitudinal multicenter project conducted at four centers of the NICHD Neonatal Research Network, included high-risk (cocaine exposed) and matched non-cocaine exposed infants. Hierarchical regressions revealed that infants’ attention orienting at 1 month significantly predicted more frequent initiating joint attention at 12 (but not 18) months of age. Social engagement at 4 months predicted initiating joint attention at 18 months. Results provide the first empirical evidence for the role of visual attention and social engagement behaviors as developmental precursors for later joint attention outcome. PMID:27786527

Designing and Conducting Health Systems Research Projects ...

International Development Research Centre (IDRC) Digital Library (Canada)

Home · Resources · Publications. Designing and Conducting Health Systems Research Projects Volume 1: Proposal Development and Fieldwork ... IDRC and the United Kingdom's Global AMR Innovation Fund—managed by the ... New website will help record vital life events to improve access to services for all.

Conducting Precision Medicine Research with African Americans.

Science.gov (United States)

Halbert, Chanita Hughes; McDonald, Jasmine; Vadaparampil, Susan; Rice, LaShanta; Jefferson, Melanie

2016-01-01

Precision medicine is an approach to detecting, treating, and managing disease that is based on individual variation in genetic, environmental, and lifestyle factors. Precision medicine is expected to reduce health disparities, but this will be possible only if studies have adequate representation of racial minorities. It is critical to anticipate the rates at which individuals from diverse populations are likely to participate in precision medicine studies as research initiatives are being developed. We evaluated the likelihood of participating in a clinical study for precision medicine. Observational study conducted between October 2010 and February 2011 in a national sample of African Americans. Intentions to participate in a government sponsored study that involves providing a biospecimen and generates data that could be shared with other researchers to conduct future studies. One third of respondents would participate in a clinical study for precision medicine. Only gender had a significant independent association with participation intentions. Men had a 1.86 (95% CI = 1.11, 3.12, p = 0.02) increased likelihood of participating in a precision medicine study compared to women in the model that included overall barriers and facilitators. In the model with specific participation barriers, distrust was associated with a reduced likelihood of participating in the research described in the vignette (OR = 0.57, 95% CI = 0.34, 0.96, p = 0.04). African Americans may have low enrollment in PMI research. As PMI research is implemented, extensive efforts will be needed to ensure adequate representation. Additional research is needed to identify optimal ways of ethically describing precision medicine studies to ensure sufficient recruitment of racial minorities.

Conducting qualitative research within Clinical Trials Units: avoiding potential pitfalls.

Science.gov (United States)

Cooper, Cindy; O'Cathain, Alicia; Hind, Danny; Adamson, Joy; Lawton, Julia; Baird, Wendy

2014-07-01

The value of using qualitative research within or alongside randomised controlled trials (RCTs) is becoming more widely accepted. Qualitative research may be conducted concurrently with pilot or full RCTs to understand the feasibility and acceptability of the interventions being tested, or to improve trial conduct. Clinical Trials Units (CTUs) in the United Kingdom (UK) manage large numbers of RCTs and, increasingly, manage the qualitative research or collaborate with qualitative researchers external to the CTU. CTUs are beginning to explicitly manage the process, for example, through the use of standard operating procedures for designing and implementing qualitative research with trials. We reviewed the experiences of two UK Clinical Research Collaboration (UKCRC) registered CTUs of conducting qualitative research concurrently with RCTs. Drawing on experiences gained from 15 studies, we identify the potential for the qualitative research to undermine the successful completion or scientific integrity of RCTs. We show that potential problems can arise from feedback of interim or final qualitative findings to members of the trial team or beyond, in particular reporting qualitative findings whilst the trial is on-going. The problems include: We make recommendations for improving the management of qualitative research within CTUs. Copyright © 2014. Published by Elsevier Inc.

Conducting Cross-Cultural Research: Controversy, Cautions, Concerns, and Considerations

Science.gov (United States)

Ford, Donna Y.; Moore, James L., III; Whiting, Gilman W.; Grantham, Tarek C.

2008-01-01

In this article, the authors share concerns and considerations for researchers conducting cross-cultural research in gifted education. They contend that researchers should be mindful of the need to consider their own humanness--their beliefs, assumptions, attitudes, values, paradigms--and the limitations of their humanness when working with…

Joint panel on occupational and environmental research for uranium production

International Nuclear Information System (INIS)

Hamel, P.; Zahary, G.

1978-01-01

The objectives of the panel are the following: to produce an annual inventory of relevant research being conducted by the supporting members; to exchange information on projected and completed research; to identify research needs and to stimulate research activity

Methodological issues involved in conducting qualitative research ...

African Journals Online (AJOL)

The purpose of this article is to describe the methodological issues involved in conducting qualitative research to explore and describe nurses' experience of being directly involved with termination of pregnancies and developing guidelines for support for these nurses. The article points out the sensitivity and responsibility ...

Joint Venture Manufacturing in China : an Exploratory Investigation

OpenAIRE

Zhang, Lihong; Goffin, Keith

1999-01-01

International joint venture (IJV) manufacturing is important for both the Chinese economy and a large number of foreign investors. A review of the literature from both Western and Chinese researchers showed that although the purpose and advantages of IJV manufacturing in China are known, a vital aspect – operations management – has largely been ignored. Therefore, exploratory interviews with managers at six companies were conducted to investigate the operations management is...

Overview of the IAEA Joint Convention and Implementation Status of the Obligation as the Contracting Party of the 5th Joint Convention

International Nuclear Information System (INIS)

Lee, Jeong Ken; Lee, Youn Keun; Ahn, Sang Myeon

2016-01-01

The Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management (Joint Convention) was adopted on 5 September 1997 by a Diplomatic Conference convened by the International Atomic Energy Agency (IAEA). The Joint Convention was opened for signature at Vienna in September 1997 and will remain open for signature until its entry into force. Korean government signed the Joint Convention in 1997 and this Convention was effective in 2002 as the Convention No. 1612. This paper will show overview of the Joint Convention and implementation status of the obligation as a Contracting Party of the 5th Joint Convention. The Joint Convention is the inter-national convention organized by the IAEA. All contracting parties shall comply with rules of the Joint Convention and conduct the obligation of this convention. Korean government successfully conducted all obligation (attending Organization Meeting and Review Meeting, submitting paper including National Report, question paper and answer paper) of the 5th Joint Convention from May 2014 to May 2015, and will prepare the obligation of the 6th Joint Convention

Conducting Clinical Research Using Crowdsourced Convenience Samples.

Science.gov (United States)

Chandler, Jesse; Shapiro, Danielle

2016-01-01

Crowdsourcing has had a dramatic impact on the speed and scale at which scientific research can be conducted. Clinical scientists have particularly benefited from readily available research study participants and streamlined recruiting and payment systems afforded by Amazon Mechanical Turk (MTurk), a popular labor market for crowdsourcing workers. MTurk has been used in this capacity for more than five years. The popularity and novelty of the platform have spurred numerous methodological investigations, making it the most studied nonprobability sample available to researchers. This article summarizes what is known about MTurk sample composition and data quality with an emphasis on findings relevant to clinical psychological research. It then addresses methodological issues with using MTurk--many of which are common to other nonprobability samples but unfamiliar to clinical science researchers--and suggests concrete steps to avoid these issues or minimize their impact.

Characteristics of joint physical custody families in Flanders

Directory of Open Access Journals (Sweden)

An Katrien Sodermans

2013-04-01

Full Text Available BACKGROUND Research conducted in the 1990s showed that children who live alternately with their mother and father after divorce (joint physical custody have closer relationships with both parents and better emotional outcomes. In 1995 and 2006, joint legal custody and joint physical custody became the default judicial recommendations in Belgium. These defaults served to increase the incidence of joint custody arrangements. However, parents with joint physical custody arrangements who divorced before 2006 may have had higher socio-economic standing and lower conflict relationships than couples that divorced afterwards. Thus earlier research on the impact of joint physical custody arrangements on child outcomes may be too optimistic when considering children of recently divorced parents. OBJECTIVE This study examines the characteristics of four different physical custody arrangements (sole mother, sole father, joint physical, and flexible custody in Flanders, Belgium, and whether these characteristics have changed over time. The legal changes in 1995 and 2006 are used to distinguish three divorce cohorts. METHODS We use data on 2,207 couples that legally divorced between 1971 and 2010 from the Divorce in Flanders project, a large-scale representative multi-actor survey. Multinomial logistic regression models provide estimates of the likelihoods of different physical custody arrangements. RESULTS The incidence of sole mother custody has decreased over the last decades and children increasingly alternate between the households of the mother and the father after divorce. The incidence of sole father custody has remained low. Higher educated parents are more likely to have joint physical custody arrangements than parents from lower social classes. Also, within couples, relative educational levels are important because the higher educated spouse is more likely to have physical custody of the child. We also find that the associations between socio

The joint cardiovascular research profile of the university medical centres in the Netherlands.

Science.gov (United States)

van Welie, S D; van Leeuwen, T N; Bouma, C J; Klaassen, A B M

2016-05-01

Biomedical scientific research in the Netherlands has a good reputation worldwide. Quantitatively, the university medical centres (UMCs) deliver about 40 % of the total number of scientific publications of this research. Analysis of the bibliometric output data of the UMCs shows that their research is highly cited. These output-based analyses also indicate the high impact of cardiovascular scientific research in these centres, illustrating the strength of this research in the Netherlands. A set of six joint national cardiovascular research topics selected by the UMCs can be recognised. At the top are heart failure, rhythm disorder research and atherosclerosis. National collaboration of top scientists in consortia in these three areas is successful in acquiring funding of large-scale programs. Our observations suggest that funding national consortia of experts focused on a few selected research topics may increase the international competitiveness of cardiovascular research in the Netherlands.

Review of Prosthetic Joint Infection from Listeria monocytogenes.

Science.gov (United States)

Bader, Gilbert; Al-Tarawneh, Mohammed; Myers, James

2016-12-01

Prosthetic joint infection from Listeria monocytogenes is rare. We decided to shed light on this illness and review the reported cases to better understand its characteristics. We conducted a comprehensive review of the English literature using PubMed. We also included one case that we had managed. We found 25 cases of prosthetic joint infection from L. monocytogenes reported individually and a retrospective study of 43 cases of joint and bone listerial infection, including 34 with prosthetic joint infection, conducted in France. We have described their clinical and para-clinical features and tried to elaborate on the pathophysiology, treatment, and prevention. Prosthetic joint infection from L. monocytogenes is mainly late. Systemic inflammation may be absent. Although rare, it must be suspected in patients at high risk for both prosthetic joint and listerial infections. In addition, those patients must be instructed on appropriate preventive measures.

Verification of the numerical model of insert-type joint of scaffolding in relation to experimental research

Science.gov (United States)

Pieńko, Michał; Błazik-Borowa, Ewa

2018-01-01

This paper presents the problem of comparing the results of computer simulations with the results of laboratory tests. The subject of the study was the insert-type joint of scaffolding loaded with a bending moment. The research was carried out on the real elements of the scaffolding. Due to the complexity of the connection different friction coefficients and depths of wedge insertion were taken into account in the analysis. The aim of conducting the series of analyses was to determine the sensitivity of the model to the mentioned characteristics. Since laboratory tests were carried out on the real samples, there were no preparations of surface involved in the load transfer. This approach caused many problems with the clear definition of the nature of work of individual node elements during the load. The analysis consist of two stages: the stage in which the connection is defined (the wedge is inserted into the rosette), and the loading stage (the node is loaded by the bending moment).

Brief review of topmost scientific results obtained in 2016 at the Joint Institute for Nuclear Research

International Nuclear Information System (INIS)

Kravchenko, E.I.; Sabaeva, E.V.

2017-01-01

This brief review presents the topmost scientific results obtained in 2016 at the Joint Institute for Nuclear Research in such fields as theoretical and experimental physics, radiation and radiobiological research, accelerators, information technology and computer physics. It also provides information about the publications by JINR staff members and activities carried out at the JINR University Centre in 2016. [ru

Annual report of the research results with Rikkyo University's joint-use reactor etc. for fiscal 1974

International Nuclear Information System (INIS)

1975-01-01

The results of research works by universities with Rikkyo University's joint-use reactor and RCNST's (Research Center for Nuclear Science and Technology) instruments for fiscal 1974 are described. Comprising the areas of activation analysis (in such as earth science, biology and environmental science), hot atom chemistry, etc., the results are presented in individual summaries. (Mori, K.)

Application of Electromagnetic Induction to Monitor Changes in Soil Electrical Conductivity Profiles in Arid Agriculture

KAUST Repository

Jadoon, K.Z.

2015-09-06

In this research, multi-configuration electromagnetic induction (EMI) measurements were conducted in a corn field to estimate variation in soil electrical conductivity profiles in the roots zone. Electromagnetic forward model based on the full solution of Maxwell\\'s equation was used to simulate the apparent electrical conductivity measured with EMI system (the CMD mini-Explorer). Joint inversion of multi-configuration EMI measurements were performed to estimate the vertical soil electrical conductivity profiles. The inversion minimizes the misfit between the measured and modeled soil apparent electrical conductivity by DiffeRential Evolution Adaptive Metropolis (DREAM) algorithm, which is based on Bayesain approach. Results indicate that soil electrical conductivity profiles have low values close to the corn plants, which indicates loss of soil moisture due to the root water uptake. These results offer valuable insights into future potential and emerging challenges in the development of joint analysis of multi-configuration EMI measurements to retrieve effective soil electrical conductivity profiles.

Joint KAERI/VAEC pre-possibility study on a new research reactor for Vietnam

Energy Technology Data Exchange (ETDEWEB)

Park, Cheol; Lee, B. C.; Chae, H. T.; Kim, H.; Lee, C. S.; Choi, C. O.; Jun, B. J. [KAERI, Taejon (Korea, Republic of); Vien, Luong Ba; Dien, Nguyen Nhi [Vietnam Atomic Energy Commission, Hanoi (Viet Nam)

2004-05-01

Based on the agreement on the technical cooperation for nuclear technology between Korea and Vietnam, a KAERI/VAEC joint study on the pre-possibility of a new research reactor for Vietnam has been carried out in the research reactor area from Nov. 2003 to May 2004. In this report, the results of the pre-possibility study on a new research reactor are described. The report presents the necessity of a new research reactor in Vietnam, and the desired performance requirements of the new research reactor if necessary. The major design characteristics of some existing research reactors and those under planning were also reviewed and the main characteristics which should be considered in selecting a new multipurpose research reactor for Vietnam were drawn. Some recommendations on the considerations for the next step of the feasibility study such as the project formulation, manpower requirements and international co-operation were also briefly touched upon.

Joint KAERI/VAEC pre-possibility study on a new research reactor for Vietnam

International Nuclear Information System (INIS)

Park, Cheol; Lee, B. C.; Chae, H. T.; Kim, H.; Lee, C. S.; Choi, C. O.; Jun, B. J.; Vien, Luong Ba; Dien, Nguyen Nhi

2004-05-01

Based on the agreement on the technical cooperation for nuclear technology between Korea and Vietnam, a KAERI/VAEC joint study on the pre-possibility of a new research reactor for Vietnam has been carried out in the research reactor area from Nov. 2003 to May 2004. In this report, the results of the pre-possibility study on a new research reactor are described. The report presents the necessity of a new research reactor in Vietnam, and the desired performance requirements of the new research reactor if necessary. The major design characteristics of some existing research reactors and those under planning were also reviewed and the main characteristics which should be considered in selecting a new multipurpose research reactor for Vietnam were drawn. Some recommendations on the considerations for the next step of the feasibility study such as the project formulation, manpower requirements and international co-operation were also briefly touched upon

Research as Profession and Practice: Frameworks for Guiding the Responsible Conduct of Research.

Science.gov (United States)

Chen, Jiin-Yu

2016-01-01

Programs in the responsible conduct of research (RCR) vary between institutions, demonstrated by disparate structures and goals. These variations may be attributed to the absence of grounding frameworks within which to examine research and RCR education programs. This article examines research as a practice and a profession, using these frames to draw out defining features of research and the moral obligations entailed. Situating research within virtue ethics can clarify how researchers might cultivate the virtues necessary for meeting its obligations and aims. By elucidating these features, these perspectives can serve to guide the development of RCR education programs.

Establishment of a cohort for the long-term clinical follow-up with dose reconstruction under the joint medical research project conducted by Sasakawa Memorial Health Foundation (Japan) and the Research Institute of Radiation Hygiene (Russia)

International Nuclear Information System (INIS)

Konstantinov, Y.O.; Bruk, G.Y.; Ershov, E.B.

2000-01-01

The cohort of children in the western districts of the Bryansk Region of Russia exposed to radiation following the Chernobyl accident is described in this paper. The cohort was selected under the Joint Medical Research Project on Dosimetry Associated with the Chernobyl Accident conducted by Sasakawa Memorial Health Foundation (SMHF, Japan) and the Research Institute of Radiation Hygiene (RIRH, Russia). The subjects of the Research Project are those people residing in the most contaminated areas of Russia who was 0 to 10 years old at the time of exposure. At the moment the cohort comprises 1210 subjects, though this number may slightly decrease in course of a follow-up in view of migration of population. Most of cohort subjects were examined on their health status within the framework of the Chernobyl Sasakawa Health and Medical Cooperation Project (CSHMCP) from 1991-1996. In view of the main findings of studies in CSHMCP were thyroid abnormalities, selection of subjects was conducted on the basis of the credible estimates of thyroid dose. Preference for subjects to be included into the cohort was defined by the availability of health examination data from previous study (1991-1996) and individual dosimetry, environmental and social data that may prove useful for reconstruction of individual dose. The primary data analyzed for subjects selection are measurements of iodine-131 in the thyroid in May-June 1986, questionnaire data on individual food habits and early measurements of radiocesium in the body of subjects made by RIRH from May to September 1986. Plausible analytical models were applied to calculate thyroid dose from available data. Previously worked out methods of thyroid dose reconstruction using early measurement data of radiocesium content in the body and questionnaire data on individual consumption of locally produced milk were reevaluated. Basing on these analytical procedures, the individual thyroid dose was ascribed to each member of the cohort. The

Establishing a Research and Evaluation Capability for the Joint Medical Education and Training Campus.

Science.gov (United States)

Kirby, Sheila Nataraj; Marsh, Julie A; Thie, Harry J

2011-01-01

In calling for the transformation of military medical education and training, the 2005 Base Realignment and Closure Commission recommended relocating basic and specialty enlisted medical training to a single site to take advantage of economies of scale and the opportunity for joint training. As a result, a joint medical education and training campus (METC) has been established at Fort Sam Houston, Texas. Two of METC's primary long-term goals are to become a high-performing learning organization and to seek accreditation as a community college. Such goals require a clear model of organizational improvement with well-defined metrics for measuring its performance and using research and evaluation to assess and improve that performance. Lessons learned from a review of practices at institutions with similar missions-such as community colleges, corporate universities, the UK's Defence Medical Education and Training Agency, and other federal agencies, such as the Veterans Health Administration-establish a clear need for an office of institutional research to help METC attain its organizational goals. They also provide useful recommendations regarding the METC office's structure, scope, and governance.

Shear-flow coupling in non-planar rock joints

International Nuclear Information System (INIS)

Makurat, A.; Barton, N.

1985-01-01

Crystalline rock masses are regarded as a possible host rock for permanent nuclear waste disposal. During the excavation of the required shafts and tunnels, the initial state of stress will be changed and cause a deformation of the rock mass and discontinuities. During the lifetime of the nuclear repository joint apertures may change due to thermally induced stress variations during the heating and cooling phase. As the conductivity of a joint is very sensitive to its aperture, fluid flow from and towards a repository, as well as the potential transport times of radionuclides are highly dependent on the deformability of the joints. Theoretical calculations of coupled flow in rock joints (Barton et al. 1984) predict an increase of conductivity of several orders of magnitude for the first few millimeters for shear displacement. The shear-dilation-conductivity coupling for two block sizes at two effective stress levels is shown

Thermal contact conductance

CERN Document Server

Madhusudana, Chakravarti V

2013-01-01

The work covers both theoretical and practical aspects of thermal contact conductance. The theoretical discussion focuses on heat transfer through spots, joints, and surfaces, as well as the role of interstitial materials (both planned and inadvertent). The practical discussion includes formulae and data that can be used in designing heat-transfer equipment for a variety of joints, including special geometries and configurations. All of the material has been updated to reflect the latest advances in the field.

Regulatory Framework for Conducting Clinical Research in Canada.

Science.gov (United States)

Alas, Josmar K; Godlovitch, Glenys; Mohan, Connie M; Jelinski, Shelly A; Khan, Aneal A

2017-09-01

Research in human subjects is at the core of achieving improvements in health outcomes. For clinical trials, in addition to the peer review of the results before publication, it is equally important to consider whether the trial will be conducted in a manner that generates data of the highest quality and provides a measure of safety for the participating subjects. In Canada, there is no definitive legislation that governs the conduct of research involving human subjects, but a network of regulations at different levels does provide a framework for both principal investigators and sponsors. In this paper, we provide an overview of the federal, provincial and institutional legislation, guidelines and policies that will inform readers about the requirements for clinical trial research. This includes a review of the role of the Food and Drug Regulations under the Food and Drugs Act and the Tri-Council Policy Statement (TCPS2), an overview of provincial legislation across the country, and a focus on selected policies from institutional research ethics boards and public health agencies. Many researchers may find navigation through regulations frustrating, and there is a paucity of information that explains the interrelationship between the different regulatory agencies in Canada. Better understanding the process, we feel, will facilitate investigators interested in clinical trials and also enhance the long-term health of Canadians.

Joint US/German Conference

CERN Document Server

Gulledge, Thomas; Jones, Albert

1993-01-01

This proceedings volume contains selected and refereed contributions that were presented at the conference on "Recent Developments and New Perspectives of Operations Research in the Area of Production Planning and Control" in Hagen/Germany, 25. - 26. June 1992. This conference was organized with the cooperation of the FernuniversiHit Hagen and was jointly hosted by the "Deutsche Gesellschaft fur Operations Research (DGOR)" and the "Manufacturing Special Interest Group of the Operations Research Society of America (ORSA-SIGMA)". For the organization of the conference we received generous financial support from the sponsors listed at the end of this volume. We wish to express our appreciation to all supporters for their contributions. This conference was the successor of the JOInt ORSA/DGOR-conference in Gaithersburg/Maryland, USA, on the 30. and 31. July 1991. Both OR-societies committed themselves in 1989 to host joint conferences on special topics of interest from the field of operations research. This goal ...

Effect of Strain Rate on Joint Strength and Failure Mode of Lead-Free Solder Joints

Science.gov (United States)

Lin, Jian; Lei, Yongping; Fu, Hanguang; Guo, Fu

2018-03-01

In surface mount technology, the Sn-3.0Ag-0.5Cu solder joint has a shorter impact lifetime than a traditional lead-tin solder joint. In order to improve the impact property of SnAgCu lead-free solder joints and identify the effect of silver content on tensile strength and impact property, impact experiments were conducted at various strain rates on three selected SnAgCu based solder joints. It was found that joint failure mainly occurred in the solder material with large plastic deformation under low strain rate, while joint failure occurred at the brittle intermetallic compound layer without any plastic deformation at a high strain rate. Joint strength increased with the silver content in SnAgCu alloys in static tensile tests, while the impact property of the solder joint decreased with increasing silver content. When the strain rate was low, plastic deformation occurred with failure and the tensile strength of the Sn-3.0Ag-0.5Cu solder joint was higher than that of Sn-0.3Ag-0.7Cu; when the strain rate was high, joint failure mainly occurred at the brittle interface layer and the Sn-0.3Ag-0.7Cu solder joint had a better impact resistance with a thinner intermetallic compound layer.

76 FR 8788 - National Nanotechnology Coordination Office; Bridging NanoEHS Research Efforts: A Joint US-EU...

Science.gov (United States)

2011-02-15

... OFFICE OF SCIENCE AND TECHNOLOGY POLICY National Nanotechnology Coordination Office; Bridging NanoEHS Research Efforts: A Joint US-EU Workshop: Public Meeting AGENCY: National Nanotechnology Coordination Office, STPO. ACTION: Notice of public meeting. SUMMARY: The National Nanotechnology Coordination...

Joint Panel on Occupational and Environmental Research for Uranium Production 1981 annual report

International Nuclear Information System (INIS)

1982-09-01

Occupational health and environmental effects associated with the production of uranium are of concern to labour, industry, government and the public. To alleviate this concern the knowledge base for the industry must be expanded. At present there is no single Canadian organization with the authority, expertise or research resources to perform this task independently. The Joint Panel on Occupational and Environmental Research for Uranium Production is a voluntary association of organizations with an active and continuing involvement in this research. Members accept the obligation to inform each other of progress in their on-going work, to contribute to the development of a comprehensive program of research and to make final research results available to the public. This report delineates guiding principles and procedures, lists member organizations, gives highlights of activities during 1981, and provides an update on the status of research projects and publications

The Universities and JAERI joint research project. The achievements and prospects

International Nuclear Information System (INIS)

Ohashi, Hiroshi; Nakamura, Takashi; Yamaguchi, Sadaei

1999-01-01

The universities and JAERI joint research project has been carried out since 13 years ago on an equivalent basis with the universities and JAERI and co-ownership of the results. This paper consists of the history and results of research project and evaluation. The significance, characteristics, themes and problems of the project are arranged. The main results and the future of the project are explained. Two large projects such as the backend chemical project and the high-degree application of radiation project have been studied. The backend chemical project consisted of four themes; the nuclear chemical researches for TRU recycle, the solid chemical research of nuclear fuel and waste, new separation method for reprocessing and waste disposal and the fundamental chemical researches for disposal waste. The high-degree application of radiation project have eight themes; effects of ion beam on organism, slow positron generation and its application to materials, ion irradiation effects on polymer materials, nuclear spectroscopy and nuclear physics of isotope using online isotope separator, shield and behavior of accelerator radiation, materials analysis by ion beam, effects of nuclear transformation product by nuclear fusion reactor radiation damage and biofunction analysis of plant using positron release nuclide. (S.Y.)

Joint production and corporate pricing: An empirical analysis of joint products in the petroleum industry

International Nuclear Information System (INIS)

Karimnejad, H.

1990-01-01

This dissertation investigates the pricing mechanism of joint products in large multi-plant and multi-product corporations. The primary objective of this dissertation is to show the consistency of classical theories of production with corporate pricing of joint products. This dissertation has two major parts. Part One provides a theoretical framework for joint production and corporate pricing. In this part, joint production is defined and its historical treatment by classical and contemporary economists is analyzed. Part Two conducts an empirical analysis of joint products in the US petroleum industry. Methods of cost allocation are used in the pricing of each individual petroleum product. Three methods are employed to distribute joint production costs to individual petroleum products. These methods are, the sales value method, the barrel gravity method and the average unit cost method. The empirical findings of dissertation provide useful guidelines for pricing policies of large multi-product corporations

10 CFR 1040.123 - Consolidated or joint hearings.

Science.gov (United States)

2010-01-01

... ACTIVITIES Enforcement Opportunity for Hearing § 1040.123 Consolidated or joint hearings. In cases in which... 10 Energy 4 2010-01-01 2010-01-01 false Consolidated or joint hearings. 1040.123 Section 1040.123... departments or agencies, where applicable, provide for the conduct of consolidated or joint hearings and for...

Experimental research of joint influence of salinization and petroleum pollution on thermal capacity of frozen ground

International Nuclear Information System (INIS)

Motenko, R.G.

2010-01-01

Most gas and petroleum fields are located in permafrost zones, with some being on saline territories. Oil pollution of soils can occur in different ways and at different points such as during the extraction, processing and storage, and during transportation of oil and petroleum products. Oil producing pollution and salinization of soil often happen together. In this case, the sources of salts are the formation fluid, commercial waste water, the contents of the granaries and other geochemically active substances used for the extraction and desalting of crude oil. Joint salinization and contamination can also happen during the rupture of oil pipelines in saline areas. Although there is research available on the properties of saline soils and on properties of soils polluted with petroleum, there are no studies that describe changes of ground properties with joint pollution of salt and petroleum. This paper presented a study that examined the joint influence of salinization and petroleum pollution on the thermal characteristics of thawed and frozen grounds, particularly on thermal capacity. The paper outlined the purpose of the research and described the experimental methods. It was concluded that an increase of salinization increases the heat capacity of frozen soil because the amount of unfrozen water increases with increasing salinization. 10 refs., 5 figs.

Experimental research of joint influence of salinization and petroleum pollution on thermal capacity of frozen ground

Energy Technology Data Exchange (ETDEWEB)

Motenko, R.G. [Moscow State Univ., Moscow (Russian Federation). Dept. of Geocryology; Grechishcheva, E.S. [Fundamentproek, Moscow (Russian Federation)

2010-07-01

Most gas and petroleum fields are located in permafrost zones, with some being on saline territories. Oil pollution of soils can occur in different ways and at different points such as during the extraction, processing and storage, and during transportation of oil and petroleum products. Oil producing pollution and salinization of soil often happen together. In this case, the sources of salts are the formation fluid, commercial waste water, the contents of the granaries and other geochemically active substances used for the extraction and desalting of crude oil. Joint salinization and contamination can also happen during the rupture of oil pipelines in saline areas. Although there is research available on the properties of saline soils and on properties of soils polluted with petroleum, there are no studies that describe changes of ground properties with joint pollution of salt and petroleum. This paper presented a study that examined the joint influence of salinization and petroleum pollution on the thermal characteristics of thawed and frozen grounds, particularly on thermal capacity. The paper outlined the purpose of the research and described the experimental methods. It was concluded that an increase of salinization increases the heat capacity of frozen soil because the amount of unfrozen water increases with increasing salinization. 10 refs., 5 figs.

Hybrid Carbon-Glass Fiber/Toughened Epoxy Thick Composite Joints Subject to Drop-Weight and Ballistic Impacts

National Research Council Canada - National Science Library

Liaw, Benjamin; Delale, Feridun

2007-01-01

... No. DAAD19-02-R-0010 to conduct research on hybrid carbon-S2 glass fiber/toughened epoxy thick-section, hybrid interwoven composite joints subject to drop-weight and ballistic impacts. Dr. Basavaraju B. Raju of U.S...

Brief review of topmost scientific results obtained in 2015 at the Joint Institute for Nuclear Research

International Nuclear Information System (INIS)

Sabaeva, E.V.; Krupko, E.I.

2016-01-01

This brief review presents the topmost scientific results obtained in 2015 at the Joint Institute for Nuclear Research in such fields as theoretical and experimental physics, radiation and radiobiological research, accelerators, information technology and computer physics. It also provides information about the publications by JINR staff members, awards given to JINR scientists, and activities carried out at the JINR University Centre in 2015. [ru

Brief review of topmost scientific results obtained in 2013 at the Joint Institute for Nuclear Research

International Nuclear Information System (INIS)

Sabaeva, E.V.; Kravchenko, E.I.

2014-01-01

This brief review presents the topmost scientific results obtained in 2013 at the Joint Institute for Nuclear Research in such areas as theoretical physics, experimental physics, radiation and radiobiological research, accelerators, information technology and computer physics. It also provides information on the number of publications by JINR staff members, awards given to JINR scientists, and activities carried out at the JINR University Centre in 2013.

Brief review of topmost scientific results obtained in 2014 at the Joint Institute for Nuclear Research

International Nuclear Information System (INIS)

Bulatova, V.V.; Sabaeva, E.V.

2015-01-01

This brief review presents the topmost scientific results obtained in 2014 at the Joint Institute for Nuclear Research in such fields as theoretical and experimental physics, radiation and radiobiological research, accelerators, information technology and computer physics. It also provides information about the publications by JINR staff members, patents for inventions, awards given to JINR scientists, and activities carried out at the JINR University Centre in 2014. [ru

10 CFR 4.64 - Consolidated or joint hearings.

Science.gov (United States)

2010-01-01

... Consolidated or joint hearings. In cases in which the same or related facts are asserted to constitute... 10 Energy 1 2010-01-01 2010-01-01 false Consolidated or joint hearings. 4.64 Section 4.64 Energy... or agencies, where applicable, provide for the conduct of consolidated or joint hearings, and for the...

Athletes’ Shoulder Joints Traumas Manual Therapy Rehabilitation

OpenAIRE

A.N. Sykhorychko; Т.G. Kovalenko; М.А. Sykhorychko

2012-01-01

The examination of 60 athletes, aged 18-30, suffering from chronic pains in shoulder joints was conducted. So, 20 women and 20 men were engaged in track and field and team sports, 15 in weightlifting and strength sports, 5 women in strength sports. Shoulder Joints Traumas Manual Therapy enables to reduce pain syndrome, restore shoulder joint flexibility, normalize trophism after trauma and normalize cervicothoracic transition biomechanics.

Establishment of Korea-Russia bilateral research collaboration for studies on biological effects of cosmic ray and space radiation

Energy Technology Data Exchange (ETDEWEB)

Lee, Juwoon; Kim, Dongho; Choi, Jongil; Song, Beomseok; Kim, Jaekyung; Kang, Oilhyun; Lee, Yoonjong; Kim, Jinhong; Jo, Minho

2011-04-15

{Omicron} KAERI-IBMP joint workshop on countermeasure and application researches to space environments - Sharing of state-of-the-art researches on space radiobiology using bio-satellites (BION-M1, Photon-soil) and ISS module (Bio-risk) was conducted - Sharing and discussion of state-of-the-art researches on dosimetry of space radiation and its affect on organisms were conducted. {Omicron} Making a contract on KAERI-IBMP Joint Research using Bio-risk module - Contract on KAERI-IBMP Joint Research to evaluate effect of space environment (microgravity and space radiation) on fermentative fungi (Aspergillus oryzae), Algae (Nostoc sp.), and plant seeds (rice, Arabidopsis thaliana, Brachypodium distachyon) was made in November, 2010. {Omicron} Discussion on new Joint Researches on evaluation of space radiation on organisms - Final step on Bion-M projects in terms of evaluation of physiological changes of lactic acid bacteria consumed by Mouse - Discussing new joint research on evaluation of physiological changes of primate by space radiation {Omicron} Establishment and management of the practical working group to invite a branch office of the IBMP in Korea - The system and the working group to implement cooperating researches between KAERI-IBMP on space radiation were established.

Establishment of Korea-Russia bilateral research collaboration for studies on biological effects of cosmic ray and space radiation

International Nuclear Information System (INIS)

Lee, Juwoon; Kim, Dongho; Choi, Jongil; Song, Beomseok; Kim, Jaekyung; Kang, Oilhyun; Lee, Yoonjong; Kim, Jinhong; Jo, Minho

2011-04-01

Ο KAERI-IBMP joint workshop on countermeasure and application researches to space environments - Sharing of state-of-the-art researches on space radiobiology using bio-satellites (BION-M1, Photon-soil) and ISS module (Bio-risk) was conducted - Sharing and discussion of state-of-the-art researches on dosimetry of space radiation and its affect on organisms were conducted. Ο Making a contract on KAERI-IBMP Joint Research using Bio-risk module - Contract on KAERI-IBMP Joint Research to evaluate effect of space environment (microgravity and space radiation) on fermentative fungi (Aspergillus oryzae), Algae (Nostoc sp.), and plant seeds (rice, Arabidopsis thaliana, Brachypodium distachyon) was made in November, 2010. Ο Discussion on new Joint Researches on evaluation of space radiation on organisms - Final step on Bion-M projects in terms of evaluation of physiological changes of lactic acid bacteria consumed by Mouse - Discussing new joint research on evaluation of physiological changes of primate by space radiation Ο Establishment and management of the practical working group to invite a branch office of the IBMP in Korea - The system and the working group to implement cooperating researches between KAERI-IBMP on space radiation were established

Proceedings of the symposium on the joint research program between JAERI and Universities. Current status and future perspectives of the chemistry research in the nuclear fuel cycle back end field

International Nuclear Information System (INIS)

1999-10-01

The first Symposium on the Joint Research Project between JAERI and Universities was held in Tokyo, January 27, 1999, to present the main achievements of the project in these 5 years and to discuss future perspectives of the chemistry research relating to the nuclear fuel cycle. The areas covered by the Joint Research Project are (1) Nuclear Chemistry for TRU Recycling, (2) Solid State Chemistry on Nuclear Fuels and Wastes, (3) Solution Chemistry on Fuel Reprocessing and Waste Management, and (4) Fundamental Chemistry on Radioactive Waste Disposal. The 8 papers are indexed individually. (J.P.N.)

Challenges Confronting Beginning Researchers in Conducting Literature Reviews

Science.gov (United States)

Chen, Der-Thanq; Wang, Yu-Mei; Lee, Wei Ching

2016-01-01

Conducting literature review is a complicated, sometimes confusing and laborious process that beginning educational researchers, especially graduate students, often find challenging. However, in the past these challenges were hardly considered, but in more recent times they have been increasingly considered by various faculties and graduate…

What Determines Joint Venture Termination?

DEFF Research Database (Denmark)

Nielsen, Bo Bernhard

2012-01-01

Joint venture (JV) research continues to flourish as researchers seek to advance our understanding of why so many JVs fail. Cui and Kumar (this issue) take a contingency approach to explain how and why business relatedness may provide new insights as to what determines JV termination. This commen......Joint venture (JV) research continues to flourish as researchers seek to advance our understanding of why so many JVs fail. Cui and Kumar (this issue) take a contingency approach to explain how and why business relatedness may provide new insights as to what determines JV termination...

NIFS joint research meeting on plasma facing components, PSI, and heat/particle control

International Nuclear Information System (INIS)

Yamashina, T.

1997-10-01

The LHD collaboration has been started in 1996. Particle and heat control is one of the categories for the collaboration, and a few programs have been nominated in these two years. A joint research meeting on PFC, PSI, heat and particle meeting was held at NIFS on June 27, 1997, in which present status of these programs were reported. This is a collection of the notes and view graphs presented in this meeting. Brief reviews and research plan of each program are included in relation to divertor erosion and sputtering, impurity generation, hydrogen recycling, edge plasma structure, edge transport and its control, heat removal, particle exhaust, wall conditioning etc. (author)

A consensus statement on how to conduct inclusive health research.

Science.gov (United States)

Frankena, T K; Naaldenberg, J; Cardol, M; Garcia Iriarte, E; Buchner, T; Brooker, K; Embregts, P; Joosa, E; Crowther, F; Fudge Schormans, A; Schippers, A; Walmsley, J; O'Brien, P; Linehan, C; Northway, R; van Schrojenstein Lantman-de Valk, H; Leusink, G

2018-04-11

The active involvement of people with intellectual disabilities in research, or inclusive research, is relatively common. However, inclusive health research is less common, even though it is expected to lead to appropriate healthcare and increased quality of life. Inclusive health research can build upon lessons learned from inclusive research. A total of 17 experts on inclusive (health) research without intellectual disabilities and 40 experts with intellectual disabilities collaborated in this consensus statement. The consensus statement was developed in three consecutive rounds: (1) an initial feedback round; (2) a roundtable discussion at the 2016 International Association for the Scientific Study of Intellectual and Developmental Disabilities World Congress; and (3) a final feedback round. This consensus statement provides researchers with guidelines, agreed upon by experts in the field, regarding attributes, potential outcomes, reporting and publishing, and future research directions, for designing and conducting inclusive health research. Consensus was reached on how to design and conduct inclusive health research. However, this statement should be continuously adapted to incorporate recent knowledge. The focus of this consensus statement is largely on inclusive health research, but the principles can also be applied to other areas. © 2018 MENCAP and International Association of the Scientific Study of Intellectual and Developmental Disabilities and John Wiley & Sons Ltd.

Fatigue behaviour of friction welded medium carbon steel and austenitic stainless steel dissimilar joints

International Nuclear Information System (INIS)

Paventhan, R.; Lakshminarayanan, P.R.; Balasubramanian, V.

2011-01-01

Research highlights: → Fusion welding of dissimilar metals is a problem due to difference in properties. → Solid state welding process such as friction welding is a solution for the above problem. → Fatigue life of friction welded carbon steel and stainless steel joints are evaluated. → Effect of notch on the fatigue life of friction welded dissimilar joints is reported. → Formation of intermetallic is responsible for reduction in fatigue life of dissimilar joints. -- Abstract: This paper reports the fatigue behaviour of friction welded medium carbon steel-austenitic stainless steel (MCS-ASS) dissimilar joints. Commercial grade medium carbon steel rods of 12 mm diameter and AISI 304 grade austenitic stainless steel rods of 12 mm diameter were used to fabricate the joints. A constant speed, continuous drive friction welding machine was used to fabricate the joints. Fatigue life of the joints was evaluated conducting the experiments using rotary bending fatigue testing machine (R = -1). Applied stress vs. number of cycles to failure (S-N) curve was plotted for unnotched and notched specimens. Basquin constants, fatigue strength, fatigue notch factor and notch sensitivity factor were evaluated for the dissimilar joints. Fatigue strength of the joints is correlated with microstructure, microhardness and tensile properties of the joints.

Exploring the Challenges of Conducting Respectful Research: Seen and Unforeseen Factors within Urban School Research

Science.gov (United States)

Samaroo, Julia; Dahya, Negin; Alidina, Shahnaaz

2013-01-01

This paper discusses the significance of conducting respectful research within urban schools, using the example of one large-scale university-school board partnership in northwestern Toronto. The authors, three research assistants on the project, use their experiences within three of the participating schools to interrogate the research approach…

Fiscal 1998 report on international joint research project for preventing global warming; 1998 nendo chikyu ondanka boshi kokusai kyodo kenkyu jigyo hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-12-01

Japanese researchers were dispatched to research institutes abroad for conducting joint studies on nine subjects for which such efforts would work effectively. The researchers were sent to various research institutes in the U.S., Britain, Germany, and others. The nine subjects were (1) the application of the most up-to-date welding and bonding technologies to liquid hydrogen storage/transportation containers, (2) development of low-temperature high-activity metal catalysts for energy conservation processes, (3) study of CO2 emission behavior using a large-scale simulator of deep sea circumstances, (4) study of condensation control for steam and chemical species in the global atmosphere, (5) numerical analysis of semiconductor crystal growth for ultralow loss power device, (6) development of sulfur-rich hydrocarbon gasification technology using a metal melting furnace, (7) assessment of techniques for evaluating origins of environmental pollution gas, geothermal gas, and soil gas using multiple isotopes, (8) analysis of behavior of the steam circulation type turbine system, and (9) the embodiment of a large premixed compression ignition engine. (NEDO)

Research on Microstructure and Properties of Welded Joint of High Strength Steel

Science.gov (United States)

Zhu, Pengxiao; Li, Yi; Chen, Bo; Ma, Xuejiao; Zhang, Dongya; Tang, Cai

2018-01-01

BS960 steel plates were welded by Laser-MAG and MAG. The microstructure and properties of the welded joints were investigated by optical microscope, micro-hardness tester, universal tensile testing machine, impact tester, scanning electron microscope (SEM) and fatigue tester. By a series of experiments, the following results were obtained: The grain size of the coarse grain zone with Laser-MAG welded joint is 20μm, and that with MAG welded joint is about 32μm, both of the fine grain region are composed of fine lath martensite and granular bainite; the width of the heat affected region with Laser-MAG is lower than that with MAG. The strength and impact energy of welded joints with Laser-MAG is higher than that with MAG. The conditioned fatigue limit of welded joint with Laser-MAG is 280MPa; however, the conditioned fatigue limit of welded joint with MAG is 250MPa.

Report of researches by joint use of Kyoto University Research Reactor Institute in the second half of the fiscal year 1978

International Nuclear Information System (INIS)

1981-03-01

This is the biannual report of 69 research items by the joint use of the reactor, each item being written in a page. The research items are roughly classified into 25 items related to chemistry, 18 items to physics, 6 items to metallurgy, 4 items to geology, 14 items to biology and medicine, and 2 items to agriculture. Presence of many items related to physics and chemistry is a matter of course, but the increase of the items related to biology and medicine is noticeable. (Wakatsuki, Y.)

The joint flanker effect and the joint Simon effect: On the comparability of processes underlying joint compatibility effects.

Science.gov (United States)

Dittrich, Kerstin; Bossert, Marie-Luise; Rothe-Wulf, Annelie; Klauer, Karl Christoph

2017-09-01

Previous studies observed compatibility effects in different interference paradigms such as the Simon and flanker task even when the task was distributed across two co-actors. In both Simon and flanker tasks, performance is improved in compatible trials relative to incompatible trials if one actor works on the task alone as well as if two co-actors share the task. These findings have been taken to indicate that actors automatically co-represent their co-actor's task. However, recent research on the joint Simon and joint flanker effect suggests alternative non-social interpretations. To which degree both joint effects are driven by the same underlying processes is the question of the present study, and it was scrutinized by manipulating the visibility of the co-actor. While the joint Simon effect was not affected by the visibility of the co-actor, the joint flanker effect was reduced when participants did not see their co-actors but knew where the co-actors were seated. These findings provide further evidence for a spatial interpretation of the joint Simon effect. In contrast to recent claims, however, we propose a new explanation of the joint flanker effect that attributes the effect to an impairment in the focusing of spatial attention contingent on the visibility of the co-actor.

Finite element analysis of dovetail joint made with the use of CNC technology

Directory of Open Access Journals (Sweden)

Václav Sebera

2010-01-01

Full Text Available The objective of the paper is the parametrization and the finite element analysis of mechanical pro­per­ties of a through dovetail joint made with the use of a specific procedure by a 3-axis CNC machine. This corner joint was used for the simulation of the bending load of the joint in the angle plane – by compression, i.e. by pressing the joint together. The deformation fields, the stress distribution, the stiffness and the bending moment of the joints were evaluated. The finite element system ANSYS was used to create two parametric numerical models of the joint. The first one represents an ideal­ly stiff joint – both joint parts have been glued together. The second model includes the contact between the joined parts. This numerical model was used to monitor the response of the joint stiffness to the change of the static friction coefficient. The results of both models were compared both with each other and with similar analyses conducted within the research into ready-to-assemble furniture joints. The results can be employed in the designing of more complex furniture products with higher demands concerning stiffness characteristics, such as furniture for sitting. However, this assumption depends on the correction of the created parametric models by experimental testing.

The severity of temporomandibular joint disorder by teeth loss in the elderly

Directory of Open Access Journals (Sweden)

Indry Herdiyani

2011-07-01

Full Text Available Temporomandibular joint dysfunction is a term that covers a number of clinical problems that involves masticatory muscles, temporomandibular joints, and related structures, or both. Loss of tooth was an etiology of temporomandibular joint dysfunction. The purpose of this study was to obtain the description of temporomandibular joint dysfunction level that caused by tooth loss of elderly in three nursing home Bandung. This was a descriptive study using the survey method of the elderly in three nursing home Bandung. A total of 34 people consist 6 males and 28 females. The subjects were examined by symptoms of temporomandibular joint dysfunction and the dysfunction level was assessed by Helkimo Clinical Dysfunction Index. The result of this study shows that elderly in Nursing Home Bandung have mild dysfunction level was 7 (14.71%, moderate dysfunction level was 22 (64.71%, and severe dysfunction level is 5 (20.58%. It can be concluded that loss of the teeth is one of the etiologies of temporomandibular joint disorder. Based on the research conducted, it can be concluded that all elderly with teeth loss will have the temporomandibular joint disorder and the most severity happens based on teeth loss by using the Helkimo Clinical Disfunction Index score was the moderate disorder.

Challenges in conducting qualitative research in health: A conceptual paper

Science.gov (United States)

Khankeh, Hamidreza; Ranjbar, Maryam; Khorasani-Zavareh, Davoud; Zargham-Boroujeni, Ali; Johansson, Eva

2015-01-01

Background: Qualitative research focuses on social world and provides the tools to study health phenomena from the perspective of those experiencing them. Identifying the problem, forming the question, and selecting an appropriate methodology and design are some of the initial challenges that researchers encounter in the early stages of any research project. These problems are particularly common for novices. Materials and Methods: This article describes the practical challenges of using qualitative inquiry in the field of health and the challenges of performing an interpretive research based on professional experience as a qualitative researcher and on available literature. Results: One of the main topics discussed is the nature of qualitative research, its inherent challenges, and how to overcome them. Some of those highlighted here include: identification of the research problem, formation of the research question/aim, and selecting an appropriate methodology and research design, which are the main concerns of qualitative researchers and need to be handled properly. Insights from real-life experiences in conducting qualitative research in health reveal these issues. Conclusions: The paper provides personal comments on the experiences of a researcher in conducting pure qualitative research in the field of health. It offers insights into the practical difficulties encountered when performing qualitative studies and offers solutions and alternatives applied by these authors, which may be of use to others. PMID:26793245

Athletes’ Shoulder Joints Traumas Manual Therapy Rehabilitation

Directory of Open Access Journals (Sweden)

A.N. Sykhorychko

2012-06-01

Full Text Available The examination of 60 athletes, aged 18-30, suffering from chronic pains in shoulder joints was conducted. So, 20 women and 20 men were engaged in track and field and team sports, 15 in weightlifting and strength sports, 5 women in strength sports. Shoulder Joints Traumas Manual Therapy enables to reduce pain syndrome, restore shoulder joint flexibility, normalize trophism after trauma and normalize cervicothoracic transition biomechanics.

Research report for fiscal 1998. Promotion of activities implemented jointly etc. in China; 1998 nendo Chugoku ni okeru kyodo jisshi katsudo nado suishin chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The Kyoto Protocol allows some flexibility in the implementation of methods for achieving the goal, such as emission trading, activities implemented jointly (AIJ) among advanced countries, construction of clean development mechanisms (CDM) with developing countries, etc., and Japan intends to positively make use of them for the achievement of the goal. For China, who holds second place in the list of greenhouse gas emitting countries in the world, the promotion of CDM is quite important. With the situation taken into consideration, interaction was effected with Chinese officers and scientists of government agencies and academic institutes involved in environmental matters, and researches were conducted. Views and information were exchanged regarding environmental problems and, after on-site investigations, researches were conducted and suggestions were presented as to how AIJ and CDM should be. The suggestions covered Chinese policies toward AIJ and CDM, current state of AIJ projects in China and systems for their promotion, means for enhancing such projects, and discovery of candidates for AIJ and CDM project application. (NEDO)

Conducting research in clinical psychology practice: Barriers, facilitators, and recommendations.

Science.gov (United States)

Smith, Kirsten V; Thew, Graham R

2017-09-01

The combination of clinical psychologists' therapeutic expertise and research training means that they are in an ideal position to be conducting high-quality research projects. However, despite these skills and the documented benefits of research to services and service users, research activity in practice remains low. This article aims to give an overview of the advantages of, and difficulties in conducting research in clinical practice. We reviewed the relevant literature on barriers to research and reflected on our clinical and research experiences in a range of contexts to offer practical recommendations. We considered factors involved in the planning, sourcing support, implementation, and dissemination phases of research, and outline suggestions to improve the feasibility of research projects in post-qualification roles. We suggest that research leadership is particularly important within clinical psychology to ensure the profession's continued visibility and influence within health settings. Clinical implications Emerging evidence suggests that clinical settings that foster research are associated with better patient outcomes. Suggestions to increase the feasibility of research projects in clinical settings are detailed. Limitations The present recommendations are drawn from the authors' practical experience and may need adaptation to individual practitioners' settings. This study does not attempt to assess the efficacy of the strategies suggested. © 2017 The Authors. British Journal of Clinical Psychology published by John Wiley & Sons Ltd on behalf of British Psychological Society.

Rehabilitation after total joint replacement: a scoping study.

Science.gov (United States)

L Snell, Deborah; Hipango, Julia; Sinnott, K Anne; Dunn, Jennifer A; Rothwell, Alastair; Hsieh, C Jean; DeJong, Gerben; Hooper, Gary

2018-07-01

The evidence supporting rehabilitation after joint replacement, while vast, is of variable quality making it difficult for clinicians to apply the best evidence to their practice. We aimed to map key issues for rehabilitation following joint replacement, highlighting potential avenues for new research. We conducted a scoping study including research published between January 2013 and December 2016, evaluating effectiveness of rehabilitation following hip and knee total joint replacement. We reviewed this work in the context of outcomes described from previously published research. Thirty individual studies and seven systematic reviews were included, with most research examining the effectiveness of physiotherapy-based exercise rehabilitation after total knee replacement using randomized control trial methods. Rehabilitation after hip and knee replacement whether carried out at the clinic or monitored at home, appears beneficial but type, intensity and duration of interventions were not consistently associated with outcomes. The burden of comorbidities rather than specific rehabilitation approach may better predict rehabilitation outcome. Monitoring of recovery and therapeutic attention appear important but little is known about optimal levels and methods required to maximize outcomes. More work exploring the role of comorbidities and key components of therapeutic attention and the therapy relationship, using a wider range of study methods may help to advance the field. Implications for Rehabilitation Physiotherapy-based exercise rehabilitation after total hip replacement and total knee replacement, whether carried out at the clinic or monitored at home, appears beneficial. Type, intensity, and duration of interventions do not appear consistently associated with outcomes. Monitoring a patient's recovery appears to be an important component. The available research provides limited guidance regarding optimal levels of monitoring needed to achieve gains following hip

Proceedings of the Third International Workshop on Jointed Structures.

Energy Technology Data Exchange (ETDEWEB)

Starr, Michael James; Brake, Matthew Robert; Segalman, Daniel Joseph; Bergman, Lawrence A.; Ewins, David J.

2013-08-01

The Third International Workshop on Jointed Structures was held from August 16th to 17th, 2012, in Chicago Illinois, following the ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Thirty two researchers from both the United States and international locations convened to discuss the recent progress of mechanical joints related research and associated efforts in addition to developing a roadmap for the challenges to be addressed over the next five to ten years. These proceedings from the workshop include the minutes of the discussions and follow up from the 2009 workshop [1], presentations, and outcomes of the workshop. Specifically, twelve challenges were formulated from the discussions at the workshop, which focus on developing a better understanding of uncertainty and variability in jointed structures, incorporating high fidelity models of joints in simulations that are tractable/efficient, motivating a new generation of researchers and funding agents as to the importance of joint mechanics research, and developing new insights into the physical phenomena that give rise to energy dissipation in jointed structures. The ultimate goal of these research efforts is to develop a predictive model of joint mechanics.

Record of the first meeting of the Joint Coordinating Committee for Radiation Effects Research

International Nuclear Information System (INIS)

1994-01-01

This conference was held July 27--28, 1994 in Moscow. The main purpose of the meeting was to implement an agreement between the Russian Federation and the US to facilitate cooperative research on health and environmental effects of radiation. It was hoped that the exchange of information would provide a good basis for employing new scientific knowledge to implement practical measures to facilitate the rehabilitation of radioactively contaminated areas and to treat radiation illnesses. The Russian Federation suggested five main scientific areas for cooperative research. They will prepare proposals on 4--5 projects within the scope of the scientific areas discussed and forward them to the US delegation for consideration of the possibility to facilitate joint research

Report from the Third Annual Symposium of the RIKEN-Max Planck Joint Research Center for Systems Chemical Biology.

Science.gov (United States)

Brunschweiger, Andreas

2014-08-15

The third Annual Symposium of the RIKEN-Max Planck Joint Research Center for Systems Chemical Biology was held at Ringberg castle, May 21-24, 2014. At this meeting 45 scientists from Japan and Germany presented the latest results from their research spanning a broad range of topics in chemical biology and glycobiology.

Building capacity for the conduct of nursing research at a Veterans Administration hospital.

Science.gov (United States)

Phelan, Cynthia H; Schumacher, Sandra; Roiland, Rachel; Royer, Heather; Roberts, Tonya

2015-05-01

Evidence is the bedrock of nursing practice, and nursing research is the key source for this evidence. In this article, we draw distinctions between the use and the conduct of nursing research and provide a perspective for how the conduct of nursing research in a Veterans Administration hospital can build an organization's capacity for nursing research.

Health, human rights, and the conduct of clinical research within oppressed populations

Directory of Open Access Journals (Sweden)

Mills Edward J

2007-11-01

Full Text Available Abstract Background Clinical trials evaluating interventions for infectious diseases require enrolling participants that are vulnerable to infection. As clinical trials are conducted in increasingly vulnerable populations, issues of protection of these populations become challenging. In settings where populations are forseeably oppressed, the conduct of research requires considerations that go beyond common ethical concerns and into issues of international human rights law. Discussion Using examples of HIV prevention trials in Thailand, hepatitis-E prevention trials in Nepal and malaria therapeutic trials in Burma (Myanmar, we address the inadequacies of current ethical guidelines when conducting research within oppressed populations. We review existing legislature in the United States and United Kingdom that may be used against foreign investigators if trial hardships exist. We conclude by making considerations for research conducted within oppressed populations.

Dose reconstruction for the Urals population. Joint Coordinating Committee on Radiation Effects Research, Project 1.1 -- Final report

International Nuclear Information System (INIS)

Degteva, M.O.; Drozhko, E.; Anspaugh, L.R.; Napier, B.A.; Bouville, A.C.; Miller, C.W.

1996-02-01

This work is being carried out as a feasibility study to determine if a long-term course of work can be implemented to assess the long-term risks of radiation exposure delivered at low to moderate dose rates to the populations living in the vicinity of the Mayak Industrial Association (MIA). This work was authorized and conducted under the auspices of the US-Russian Joint Coordinating Committee on Radiation Effects Research (JCCRER) and its Executive Committee (EC). The MIA was the first Russian site for the production and separation of plutonium. This plant began operation in 1948, and during its early days there were technological failures that resulted in the release of large amounts of waste into the rather small Techa River. There were also gaseous releases of radioiodines and other radionuclides during the early days of operation. In addition, there was an accidental explosion in a waste storage tank in 1957 that resulted in a significant release. The Techa River Cohort has been studied for several years by scientists from the Urals Research Centre for Radiation Medicine and an increase in both leukemia and solid tumors has been noted

Dose reconstruction for the Urals population. Joint Coordinating Committee on Radiation Effects Research, Project 1.1 -- Final report

Energy Technology Data Exchange (ETDEWEB)

Degteva, M.O. [Urals Research Center for Radiation Medicine, Chelyabinsk (Russian Federation); Drozhko, E. [Branch 1 of Moscow Biophysics Inst., Ozersk (Russian Federation); Anspaugh, L.R. [Lawrence Livermore National Lab., CA (United States); Napier, B.A. [Pacific Northwest National Lab., Richland, WA (United States); Bouville, A.C. [National Cancer Inst., Bethesda, MD (United States); Miller, C.W. [Centers for Disease Control and Prevention, Atlanta, GA (United States)

1996-02-01

This work is being carried out as a feasibility study to determine if a long-term course of work can be implemented to assess the long-term risks of radiation exposure delivered at low to moderate dose rates to the populations living in the vicinity of the Mayak Industrial Association (MIA). This work was authorized and conducted under the auspices of the US-Russian Joint Coordinating Committee on Radiation Effects Research (JCCRER) and its Executive Committee (EC). The MIA was the first Russian site for the production and separation of plutonium. This plant began operation in 1948, and during its early days there were technological failures that resulted in the release of large amounts of waste into the rather small Techa River. There were also gaseous releases of radioiodines and other radionuclides during the early days of operation. In addition, there was an accidental explosion in a waste storage tank in 1957 that resulted in a significant release. The Techa River Cohort has been studied for several years by scientists from the Urals Research Centre for Radiation Medicine and an increase in both leukemia and solid tumors has been noted.

The HIV and Drug Abuse Prevention Research Ethics Training Institute: Training Early-Career Scientists to Conduct Research on Research Ethics

Science.gov (United States)

Fisher, Celia B.; Yuko, Elizabeth

2018-01-01

The responsible conduct of HIV/drug abuse prevention research requires investigators with both the knowledge of and ability to generate empirical data that can enhance global ethical practices and policies. This article describes a multidisciplinary program offering early-career professionals a 2-year intensive summer curriculum along with funding to conduct a mentored research study on a wide variety of HIV/drug abuse research ethics topics. Now in its fifth year, the program has admitted 29 trainees who have to date demonstrated increased knowledge of research ethics, produced 17 peer-reviewed publications, 46 professional presentations, and submitted or been awarded five related federal grants. The institute also hosts a global information platform providing general and HIV/drug abuse relevant research ethics educational and research resources that have had more than 38,800 unique visitors from more than 150 countries. PMID:26564944

Single-photon sources for quantum technologies - Results of the joint research project SIQUTE

DEFF Research Database (Denmark)

Kück, S.; López, M.; Rodiek, B.

2017-01-01

In this presentation, the results of the joint research project “Single-Photon Sources for Quantum Technologies” (SIQUTE) [1] will be presented. The focus will be on the development of absolutely characterized single-photon sources, on the realization of an efficient waveguide-based single-photon......-photon source at the telecom wavelengths of 1.3 µm and 1.55 µm, on the implementation of the quantum-enhanced resolution in confocal fluorescence microscopy and on the development of a detector for very low photon fluxes...

Enhancement of the methodology of repository design and post-closure performance assessment for preliminary investigation stage. Progress report on NUMO-JAEA collaborative research in FY2011 (Joint research)

International Nuclear Information System (INIS)

Shibata, Masahiro; Sawada, Atsushi; Tachi, Yukio; Makino, Hitoshi; Hayano, Akira; Mitsui, Seiichiro; Taniguchi, Naoki; Oda, Chie; Kitamura, Akira; Osawa, Hideaki; Semba, Takeshi; Hioki, Kazumasa; Kamei, Gento; Ebashi, Takeshi; Kubota, Shigeru; Kurosawa, Susumu; Goto, Junichi; Goto, Takahiro; Ishii, Eiichi; Inagaki, Manabu; Moriya, Toshifumi; Suzuki, Satoru; Ohi, Takao; Ichihara, Takayuki; Ishida, Keisuke; Ishiguro, Katsuhiko; Tsuchi, Hiroyuki

2012-09-01

JAEA and NUMO have conducted a collaborative research work which is designed to enhance the methodology of repository design and performance assessment in preliminary investigation stage. The topics of such joint research are (1) study on selection of host rock, (2) study on development of scenario, (3) study on setting nuclide migration parameters, (4) study on ensuring quality of knowledge. With regard to (1), in terms of hydraulic properties, items for assessing rock property, and assessment methodology of groundwater travel time has been organized with interaction from site investigation. With regard to (2), the existing approach has been embodied, in addition, the phenomenological understanding regarding dissolution of and nuclide release from vitrified waste, corrosion of the overpack, long-term performance of the buffer are summarized. With regard to (3), the approach for parameter setting has been improved for sorption and diffusion coefficient of buffer/rock, and applied and tested for parameter setting of key radionuclides. With regard to (4), framework for ensuring quality of knowledge has been studied and examined aimed at the likely disposal facility condition. (author)

Leaving a joint audit system

DEFF Research Database (Denmark)

Holm, Claus; Thinggaard, Frank

2014-01-01

determinants model and an audit fee change model and include interaction terms. Findings: The authors find short-term fee reductions in companies switching to single audits, but only where the former joint audit contained a dominant auditor. The authors argue that in this situation bargaining power is more...... with the auditors than in a equally shared joint audit, and that the auditors' incentives to offer an initial fee discount are bigger. Research limitations/implications: The number of observations is constrained by the small Danish capital market. Future research could take a more qualitative research approach......, to examine whether the use of a single audit firm rather than two has an effect on audit quality. The area calls for further theory development covering audit fee and audit quality in joint audit settings. Practical implications: Comapnies should consider their relationship with their auditors before...

Research on a Nonlinear Robust Adaptive Control Method of the Elbow Joint of a Seven-Function Hydraulic Manipulator Based on Double-Screw-Pair Transmission

Directory of Open Access Journals (Sweden)

Gaosheng Luo

2014-01-01

Full Text Available A robust adaptive control method with full-state feedback is proposed based on the fact that the elbow joint of a seven-function hydraulic manipulator with double-screw-pair transmission features the following control characteristics: a strongly nonlinear hydraulic system, parameter uncertainties susceptible to temperature and pressure changes of the external environment, and unknown outer disturbances. Combined with the design method of the back-stepping controller, the asymptotic stability of the control system in the presence of disturbances from uncertain systematic parameters and unknown external disturbances was demonstrated using Lyapunov stability theory. Based on the elbow joint of the seven-function master-slave hydraulic manipulator for the 4500 m Deep-Sea Working System as the research subject, a comparative study was conducted using the control method presented in this paper for unknown external disturbances. Simulations and experiments of different unknown outer disturbances showed that (1 the proposed controller could robustly track the desired reference trajectory with satisfactory dynamic performance and steady accuracy and that (2 the modified parameter adaptive laws could also guarantee that the estimated parameters are bounded.

Space Suit Joint Torque Testing

Science.gov (United States)

Valish, Dana J.

2011-01-01

In 2009 and early 2010, a test was performed to quantify the torque required to manipulate joints in several existing operational and prototype space suits in an effort to develop joint torque requirements appropriate for a new Constellation Program space suit system. The same test method was levied on the Constellation space suit contractors to verify that their suit design meets the requirements. However, because the original test was set up and conducted by a single test operator there was some question as to whether this method was repeatable enough to be considered a standard verification method for Constellation or other future space suits. In order to validate the method itself, a representative subset of the previous test was repeated, using the same information that would be available to space suit contractors, but set up and conducted by someone not familiar with the previous test. The resultant data was compared using graphical and statistical analysis and a variance in torque values for some of the tested joints was apparent. Potential variables that could have affected the data were identified and re-testing was conducted in an attempt to eliminate these variables. The results of the retest will be used to determine if further testing and modification is necessary before the method can be validated.

Conducting multicenter research in healthcare simulation: Lessons learned from the INSPIRE network.

Science.gov (United States)

Cheng, Adam; Kessler, David; Mackinnon, Ralph; Chang, Todd P; Nadkarni, Vinay M; Hunt, Elizabeth A; Duval-Arnould, Jordan; Lin, Yiqun; Pusic, Martin; Auerbach, Marc

2017-01-01

Simulation-based research has grown substantially over the past two decades; however, relatively few published simulation studies are multicenter in nature. Multicenter research confers many distinct advantages over single-center studies, including larger sample sizes for more generalizable findings, sharing resources amongst collaborative sites, and promoting networking. Well-executed multicenter studies are more likely to improve provider performance and/or have a positive impact on patient outcomes. In this manuscript, we offer a step-by-step guide to conducting multicenter, simulation-based research based upon our collective experience with the International Network for Simulation-based Pediatric Innovation, Research and Education (INSPIRE). Like multicenter clinical research, simulation-based multicenter research can be divided into four distinct phases. Each phase has specific differences when applied to simulation research: (1) Planning phase , to define the research question, systematically review the literature, identify outcome measures, and conduct pilot studies to ensure feasibility and estimate power; (2) Project Development phase , when the primary investigator identifies collaborators, develops the protocol and research operations manual, prepares grant applications, obtains ethical approval and executes subsite contracts, registers the study in a clinical trial registry, forms a manuscript oversight committee, and conducts feasibility testing and data validation at each site; (3) Study Execution phase , involving recruitment and enrollment of subjects, clear communication and decision-making, quality assurance measures and data abstraction, validation, and analysis; and (4) Dissemination phase , where the research team shares results via conference presentations, publications, traditional media, social media, and implements strategies for translating results to practice. With this manuscript, we provide a guide to conducting quantitative multicenter

Annual report of joint research for using heavy ion accelerator for cancer therapy of the fiscal year 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-04-01

The heavy ion project consisted of 2 parts; clinical studies using HIMAC and joint basic researches using it. The clinical studies have been satisfactorily progressed and the number of patients treated by HIMAC reached 230 in total by the end of the fiscal year 1996. In Japan, HIMAC is the only apparatus for heavy ion acceleration. Thus, a lot of concerns from not only the medical and biological fields, but also other fundamental fields are paid to HIMAC. Further, the beam of HIMAC has been attracting international concerns, especially in the fields such as simulation of cosmic environment by heavy ion beam, dose determination using the beam, international comparison of its biological effects, etc. The operating times of HIMAC in 1996 was ca. 4800 hours in total and of those ca. 2700 hours were used for joint researches. This annual report include 12 reports of clinical research group, 4 of diagnosis one 64 of biology one and 42 of physical and engineering one. (M.N.)

The German joint research project "concepts for future gravity satellite missions"

Science.gov (United States)

Reubelt, Tilo; Sneeuw, Nico; Fichter, Walter; Müller, Jürgen

2010-05-01

Within the German joint research project "concepts for future gravity satellite missions", funded by the Geotechnologies programme of the German Federal Ministry of Education and Research, options and concepts for future satellite missions for precise (time-variable) gravity field recovery are investigated. The project team is composed of members from science and industry, bringing together experts in geodesy, satellite systems, metrology, sensor technology and control systems. The majority of team members already contributed to former gravity missions. The composition of the team guarantees that not only geodetic aspects and objectives are investigated, but also technological and financial constraints are considered. Conversely, satellite, sensor and system concepts are developed and improved in a direct exchange with geodetic and scientific claims. The project aims to develop concepts for both near and mid-term future satellite missions, taking into account e.g. advanced satellite formations and constellations, improved orbit design, innovative metrology and sensor systems and advances in satellite systems.

Joint DOE-PNC research on the use of transparency in support of nuclear nonproliferation

International Nuclear Information System (INIS)

Mochiji, Toshiro; Keeney, R.; Tazaki, Makiko; Nakhleh, C.; Puckett, J.; Stanbro, W.

1999-01-01

PNC and LANL collaborated in research on the concept of transparency in nuclear nonproliferation. The research was based on the Action Sheet No. 21, which was signed in February 1996, ''The Joint Research on Transparency in Nuclear Nonproliferation'' under the ''Agreement between the Power Reactor and Nuclear Fuel Development Corporation of Japan (PNC) and the US Department of Energy (DOE) for Cooperation in Research and Development Concerning Nuclear Material Control and Accounting Measures for Safeguards and Nonproliferation''. The purpose of Action Sheet 21 is to provide a fundamental study on Transparency to clarify the means to improve worldwide acceptability for the nuclear energy from the nuclear nonproliferation point of view. This project consists of independent research and then joint discussion at workshops that address a series of topics and issues in transparency. The activities covered in Action Sheet 21 took place over a period of 18 months. Three workshops were held; the first and the third hosted by PNC in Tokyo, Japan and the second hosted by LANL in Los Alamos, New Mexico, US. The following is a summary of the three workshops. The first workshop addressed the policy environment of transparency. Each side presented its perspective on the following issues: (1) a definition of transparency, (2) reasons for transparency, (3) detailed goals of transparency and (4) obstacles to transparency. The topic of the second workshop was ''Development of Transparency Options.'' The activities accomplished were (1) identify type of facilities where transparency might be applied, (2) define criteria for applying transparency, and (3) delineate applicable transparency options. The goal of the third workshop, ''Technical Options for Transparency,'' was to (1) identify conceptual options for transparency system design; (2) identify instrumentation, measurement, data collection and data processing options; (3) identify data display options; and (4) identify technical

Report of joint utilization results in fiscal year 1994

International Nuclear Information System (INIS)

1995-01-01

Joint utilization seems to aim at the effective use of limited funds by concentrating facilities. There is a demerit that for doing experiment, it is necessary to take a trouble of going to the place. However by utilizing jointly one facility, there is the possibility of the occurrence of sympathizing phenomena directly connected to new ideas among researchers, and it is just the state joint utilization should be in. In fiscal year 1994, the Yayoi and the linac were put to joint utilization as expected, and many results of researches were obtained by the users. In this book, in addition to the report of the results of joint utilization, the report of the Yayoi research meetings held in fiscal year 1994 is included. Eight lectures on fast neutron science, the reports of joint utilization results of 15 Yayoi on-pile studies, 9 Yayoi off-pile studies and 16 linac studies, and the reports of 11 Yayoi research meetings are included in this book. The list of the events held in the Nuclear Engineering Research Laboratory, University of Tokyo, in fiscal year 1994, the list of the names of various committee members, and the list of the names of the persons in charge of joint utilization experiments are attached. (K.I.)

Infant Responding to Joint Attention, Executive Processes, and Self-Regulation in Preschool Children

Science.gov (United States)

Van Hecke, Amy Vaughan; Mundy, Peter; Block, Jessica J.; Delgado, Christine E. F.; Parlade, Meaghan V.; Pomares, Yuly B.; Hobson, Jessica A.

2011-01-01

Infant joint attention is related to behavioral and social outcomes, as well as language in childhood. Recent research and theory suggests that the relations between joint attention and social-behavioral outcomes may reflect the role of executive self-regulatory processes in the development of joint attention. To test this hypothesis two- studies were conducted. The first, cross-sectional study examined the development of responding to joint attention skill (RJA) in terms of increasing executive efficiency of responding between 9 and 18 months of age. The results indicated that development of RJA was characterized by a decreased latency to shift attention in following another person’s gaze and head turn, as well as an increase in the proportion of correct RJA responses exhibited by older infants. The second study examined the longitudinal relations between 12-month measures of responding to joint attention (RJA) and 36-month attention regulation in a delay of gratification task. The results indicated that responding to joint attention at 12-months was significantly related to children’s use of three types of self-regulation behaviors while waiting for a snack reward at 36 months of age. These observations are discussed in light of a developmental theory of attention regulation and joint attention in infancy. PMID:22206892

Fiscal 1998 international research cooperation project. Feasibility study report on excavation of international joint research seeds; 1998 nendo kokusai kyoryoku jigyo seika hokokusho. Kokusai kyodo kenkyu seeds hakkutsu no tame no FS chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Feasibility study (FS) was made on excavation of international joint research seeds for developed countries. As FS themes, 6 themes were selected among applied 11 ones. China was interested in the joint research on improvement of a cetane number by ring-opening of LCO from fluid catalytic crackers through hydrogenation for Arabian crude oil, although China has an experience for domestic one. Since France and the USA are in the early developmental stage of practical atmospheric temperature and pressure conversion technology of lower hydrocarbon after the basic research stage, study was made on the possibility of a joint research. The other themes are as follows: Oil resource and energy conservation technology by recycling general plastics and industrial synthetic resins, advanced solid catalyst regulating technology by physicochemical technique and its application to next-generation oil refining processes, structure analysis of asphaltene and reaction mechanism analysis of heavy oil by computer simulation, and production technology of ultra-precisely controlled catalytic materials. (NEDO)

Microbial transformation of coal and coal relevant structures - presentation of a BMBF joint research project

Energy Technology Data Exchange (ETDEWEB)

Sinder, C.; Schacht, S.; Pfeifer, F.; Klein, J. [DMT-Gesellschaft fuer Forschung und Pruefung mbH, Essen (Germany)

1997-12-31

Investigations in the joint research project `Microbial transformation of coal and coal relevant structures` supported by the Ministry of Education, Science, Research and Technology (BMBF) of the Federal Republic of Germany and coordinated by the DMT-Gesellschaft fuer Forschung und Pruefung mbH (DMT) are focussed on research and development of biotechnological coal conversion processes. Up to now investigations carried out in the project lead to a number of important results. During work on the project a great number of different microorganisms was found able to degrade or solubilize coal or lignite. Enzymatic as well as regulation mechanisms of the microbial depolymerization processes have been characterized successfully. (orig.)

Study of the Peak Shear Strength of a Cement-Filled Hard Rock Joint

Science.gov (United States)

She, Cheng-Xue; Sun, Fu-Ting

2018-03-01

The peak shear strength of a cement-filled hard rock joint is studied by theoretical analysis and laboratory testing. Based on the concept of the shear resistance angle, by combining the statistical method and fractal theory, three new parameters are proposed to characterize the three-dimensional joint morphology, reflecting the effects of the average roughness, multi-scale asperities and the dispersion degree of the roughness distribution. These factors are independent of the measurement scale, and they reflect the anisotropy of the joint roughness. Compressive shear tests are conducted on cement-filled joints. Because joints without cement can be considered special cement-filled joints in which the filling degree of cement is zero, they are also tested. The cement-filled granite joint fails primarily along the granite-cement interfaces. The filling degree of cement controls the joint failure and affects its mechanical behaviour. With a decrease in the filling degree of cement, the joint cohesion decreases; however, the dilatancy angle and the basic friction angle of the interface increase. As the filling degree approaches zero, the cohesion approaches zero, while the dilatancy angle and the basic friction angle increase to those of the joint without cement. A set of formulas is proposed to evaluate the peak shear strength of the joints with and without cement. The formulas are shown to be reasonable by comparison with the tested peak shear strength, and they reflect the anisotropy of the strength. This research deepens the understanding of cement-filled joints and provides a method to evaluate their peak shear strength.

The HIV and Drug Abuse Prevention Research Ethics Training Institute: Training Early-Career Scientists to Conduct Research on Research Ethics.

Science.gov (United States)

Fisher, Celia B; Yuko, Elizabeth

2015-12-01

The responsible conduct of HIV/drug abuse prevention research requires investigators with both the knowledge of and ability to generate empirical data that can enhance global ethical practices and policies. This article describes a multidisciplinary program offering early-career professionals a 2-year intensive summer curriculum along with funding to conduct a mentored research study on a wide variety of HIV/drug abuse research ethics topics. Now in its fifth year, the program has admitted 29 trainees who have to date demonstrated increased knowledge of research ethics, produced 17 peer-reviewed publications, 46 professional presentations, and submitted or been awarded five related federal grants. The institute also hosts a global information platform providing general and HIV/drug abuse relevant research ethics educational and research resources that have had more than 38,800 unique visitors from more than 150 countries. © The Author(s) 2015.

Disassembly Properties of Cementitious Finish Joints Using an Induction Heating Method

Science.gov (United States)

Ahn, Jaecheol; Noguchi, Takafumi; Kitagaki, Ryoma

2015-01-01

Efficient maintenance and upgrading of a building during its lifecycle are difficult because a cementitious finish uses materials and parts with low disassembly properties. Additionally, the reuse and recycling processes during building demolition also present numerous problems from the perspective of environmental technology. In this study, an induction heating (IH) method was used to disassemble cementitious finish joints, which are widely used to join building members and materials. The IH rapidly and selectively heated and weakened these joints. The temperature elevation characteristics of the cementitious joint materials were measured as a function of several resistor types, including wire meshes and punching metals, which are usually used for cementitious finishing. The disassembly properties were evaluated through various tests using conductive resistors in cementitious joints such as mortar. When steel fiber, punching metal, and wire mesh were used as conductive resistors, the cementitious modifiers could be weakened within 30 s. Cementitious joints with conductive resistors also showed complete disassembly with little residual bond strength.

Choosing sheep (Ovis aries) as animal model for temporomandibular joint research: Morphological, histological and biomechanical characterization of the joint disc.

Science.gov (United States)

Angelo, D F; Morouço, P; Alves, N; Viana, T; Santos, F; González, R; Monje, F; Macias, D; Carrapiço, B; Sousa, R; Cavaco-Gonçalves, S; Salvado, F; Peleteiro, C; Pinho, M

2016-12-01

Preclinical trials are essential to the development of scientific technologies. Remarkable molecular and cellular research has been done using small animal models. However, significant differences exist regarding the articular behavior between these models and humans. Thus, large animal models may be more appropriate to perform trials involving the temporomandibular joint (TMJ). The aim of this work was to make a morphological (anatomic dissection and white light 3D scanning system), histological (TMJ in bloc was removed for histologic analysis) and biomechanical characterization (tension and compression tests) of sheep TMJ comparing the obtained results with human data. Results showed that sheep processus condylaris and fossa mandibularis are anatomically similar to the same human structures. TMJ disc has an elliptical perimeter, thinner in the center than in periphery. Peripheral area acts as a ring structure supporting the central zone. The disc cells display both fibroblast and chondrocyte-like morphology. Marginal area is formed by loose connective tissue, with some chondrocyte-like cells and collagen fibers in diverse orientations. Discs obtained a tensile modulus of 3.97±0.73MPa and 9.39±1.67MPa, for anteroposterior and mediolateral assessment. The TMJ discs presented a compressive modulus (E) of 446.41±5.16MPa and their maximum stress value (σmax) was 18.87±1.33MPa. Obtained results suggest that these animals should be considered as a prime model for TMJ research and procedural training. Further investigations in the field of oromaxillofacial surgery involving TMJ should consider sheep as a good animal model due to its resemblance of the same joint in humans. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

A history of the collaboration between the European Organisation for Nuclear Research (CERN) and the Joint Institute for Nuclear Research (JINR), and with Soviet research institutes in the USSR 1955-1970

International Nuclear Information System (INIS)

Lock, W.O.

1975-01-01

The report describes in some detail the origins and development up to 1970 of the collaboration which now exists between the European Organization for Nuclear Research (CERN) and its counterpart the Joint Institute for Nuclear Research (JINR) at Dubna, USSR and also with the Institute for High Energy Physics, Serpukhov, USSR. Part 1 deals with the relations between JINR and CERN, their beginnings and the subsequent development of exchange of scientists, joint Summer Schools, and the organization of Seminars to discuss perspectives in high energy physics. Part 2 describes first the steps which led up to the signing of an Agreement between CERN and the State Committee of the USSR for the Utilization of Atomic Energy, governing collaboration between CERN and the Institute for High Energy Physics at Serpukhov. A brief account is then given of the subsequent installation of equipment built at CERN for the Institute's 76-Gev proton accelerator and the carrying out of joint physics experiments by teams from Western Europe and from the Soviet Union. Part 3 summarizes the origins of collaborative agreements which have been made by CERN with a few other leading Institutes in the Soviet Union. A number of Annexes reproduce some of the relevant documents and letters. (author)

Evaluation of the high-temperature materials programme of the Joint Research Centre (1980-85)

International Nuclear Information System (INIS)

Glenny, R.J.E.; Boehm, H.; Gellings, P.J.; Gobin, P.; Lanzavecchia, G.; Nicholaides, C.

1986-01-01

This report covers the findings of the external panel of experts set up to evaluate the results of the Community's programme in the field of high-temperature materials (1980-85), carried out at the Petten establishment of the Joint Research Centre. The evaluation covers the quality and relevance of the research, the usefulness of the results and the role played by the JRC in this field at the European level. The report describes and gives comments on the content, structure and management of the five projects constituting the current programme, outlines the methods and procedures used during the evaluation and gives a number of recommendations pertinent to future activities

How to conduct research on overdiagnosis

DEFF Research Database (Denmark)

Brodersen, John

2017-01-01

Overdiagnosis is a growing problem worldwide. Overdiagnosis is the diagnosis of deviations, abnormalities, risk factors, and pathologies that in themselves would never cause symptoms (this applies only to risk factors and pathology), would never lead to morbidity, and would never be the cause of ...... of overdiagnosis. Finally, we can conduct research about the consequences of overdiagnosis in at least eight different areas: financial strain, hassles/inconveniences, medical costs, opportunity costs, physical harms, psychological harms, societal costs and work-related costs....... of death. Overdiagnosis is often misinterpreted as overutilization or overtreatment. Overutilization, overtreatment, and overdiagnosis are interrelated but three distinct topics. Overutilization (establishment of standard practice that does not provide net benefit) does not have to lead to overdiagnosis...

The joint project for high-intensity proton accelerators

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-08-01

Japan Atomic Energy Research Institute (JAERI) and the High Energy Accelerator Research Organization (KEK) agreed to promote the joint project integrating both the Neutron Science Project (NSP) of JAERI and the Japan Hadron Facility Project (JHF) of KEK for comprehensive studies on basic science and technology using high-intensity proton accelerator. This document describes the joint proposal prepared by the Joint Project Team of JAERI and KEK to construct accelerators and research facilities necessary both for the NSP and the JHF at the site of JAERI Tokai Establishment. (author)

Evolution of the Thermal Conductivity of Sintered Silver Joints with their Porosity Predicted by the Finite Element Analysis of Real 3D Microstructures

Science.gov (United States)

Signor, L.; Kumar, P.; Tressou, B.; Nadot-Martin, C.; Miranda-Ordonez, José; Carr, J.; Joulain, K.; Milhet, X.

2018-07-01

Silver paste sintering is a very promising technology for chip bonding in future power electronics modules owing to its high melting temperature and the good electrical and thermal properties among other classic solder alloys. However, in its sintered form, these joints contain nanometric/submicrometric pores that affect their thermal performance. The present study gives insight into the relationship between the material thermal conductivity and the real three-dimensional porous structure using finite element modelling. It is shown that over a certain pore fraction threshold (˜ 13%), the pore morphology has a non-negligible influence on the thermal conductivity. Results are also compared to predictions obtained by analytical models available in the literature.

Summary of LaRC 2-inch Erectable Joint Hardware Heritage Test Data

Science.gov (United States)

Dorsey, John T.; Watson, Judith J.

2016-01-01

As the National Space Transportation System (STS, also known as the Space Shuttle) went into service during the early 1980's, NASA envisioned many missions of exploration and discovery that could take advantage of the STS capabilities. These missions included: large orbiting space stations, large space science telescopes and large spacecraft for manned missions to the Moon and Mars. The missions required structures that were significantly larger than the payload volume available on the STS. NASA Langley Research Center (LaRC) conducted studies to design and develop the technology needed to assemble the large space structures in orbit. LaRC focused on technology for erectable truss structures, in particular, the joint that connects the truss struts at the truss nodes. When the NASA research in large erectable space structures ended in the early 1990's, a significant amount of structural testing had been performed on the LaRC 2-inch erectable joint that was never published. An extensive set of historical information and data has been reviewed and the joint structural testing results from this historical data are compiled and summarized in this report.

The joint FAO and IAEA programme

International Nuclear Information System (INIS)

Fried, M.; Lamm, C.G.

1981-01-01

In 1964 the FAO and IAEA decided to establish a joint programme for the specific purpose of assisting Member States in applying nuclear techniques to develop their food and agriculture. As a result, the Joint FAO/IAEA Division of Isotope and Radiation Applications of Atomic Energy and Agriculture Development was established. The objectives of this joint FAO/IAEA programme are to exploit the potential of isotopes and radiation applications in research and development to increase and stabilize agriculture production, to reduce production costs, to improve the quality of food, to protect agricultural products from spoilage and losses, and to minimize pollution of food and agricultural environment. The activities of the joint programme, which are briefly described, can be grouped under three main headings: co-ordination and support of research; technical assistance including training; and dissemination of information. Tables are shown giving a breakdown of 311 research contracts and agreements held with institutes in Member States and 86 technical assistance projects in 46 developing countries, providing training, expertise and specialized equipment

40 CFR 26.1303 - Submission of information pertaining to ethical conduct of completed human research.

Science.gov (United States)

2010-07-01

... ethical conduct of completed human research. 26.1303 Section 26.1303 Protection of Environment... on the Ethical Conduct of Completed Human Research § 26.1303 Submission of information pertaining to ethical conduct of completed human research. Any person who submits to EPA data derived from human...

Primary care research conducted in networks: getting down to business.

Science.gov (United States)

Mold, James W

2012-01-01

This seventh annual practice-based research theme issue of the Journal of the American Board of Family Medicine highlights primary care research conducted in practice-based research networks (PBRNs). The issue includes discussion of (1) theoretical and methodological research, (2) health care research (studies addressing primary care processes), (3) clinical research (studies addressing the impact of primary care on patients), and (4) health systems research (studies of health system issues impacting primary care including the quality improvement process). We had a noticeable increase in submissions from PBRN collaborations, that is, studies that involved multiple networks. As PBRNs cooperate to recruit larger and more diverse patient samples, greater generalizability and applicability of findings lead to improved primary care processes.

Oxide dispersion strengthened ferritic steels: a basic research joint program in France

Science.gov (United States)

Boutard, J.-L.; Badjeck, V.; Barguet, L.; Barouh, C.; Bhattacharya, A.; Colignon, Y.; Hatzoglou, C.; Loyer-Prost, M.; Rouffié, A. L.; Sallez, N.; Salmon-Legagneur, H.; Schuler, T.

2014-12-01

AREVA, CEA, CNRS, EDF and Mécachrome are funding a joint program of basic research on Oxide Dispersion Strengthened Steels (ODISSEE), in support to the development of oxide dispersion strengthened 9-14% Cr ferritic-martensitic steels for the fuel element cladding of future Sodium-cooled fast neutron reactors. The selected objectives and the results obtained so far will be presented concerning (i) physical-chemical characterisation of the nano-clusters as a function of ball-milling process, metallurgical conditions and irradiation, (ii) meso-scale understanding of failure mechanisms under dynamic loading and creep, and, (iii) kinetic modelling of nano-clusters nucleation and α/α‧ unmixing.

Oxide dispersion strengthened ferritic steels: a basic research joint program in France

Energy Technology Data Exchange (ETDEWEB)

Boutard, J.-L., E-mail: jean-louis.boutard@cea.fr [Cabinet du Haut-Commissaire, CEA/Saclay, 91191 Gif sur Yvette Cedex (France); Badjeck, V. [LPS, UMR CNRS 8502, Building 510, Université Paris-Sud 11, 91405 Orsay Cedex (France); Barguet, L. [LAUM, UMR CNRS 6613, Building IAM – UFR Sciences, Avenue O. Messiaen, 72085 Le Mans Cedex 9 (France); Barouh, C. [DMN/SRMP, CEA/Saclay, Building 520, 91191 Gif sur Yvette Cedex (France); Bhattacharya, A. [DMN/SRMP, CEA/Saclay, Building 520, 91191 Gif sur Yvette Cedex (France); CSNSM, UMR CNRS 8609, Université Paris-Sud 11, Buildings 104 and 108, 91405 Orsay Campus (France); Colignon, Y. [IM2NP, UMR CNRS 7334, Case 142, Faculté des Sciences, Campus de Saint Jérôme, Aix Marseille Université, 13397 Marseille Cedex 20 (France); Hatzoglou, C. [GPM, UMR CNRS 6634, Technopôle du Madrillet, Avenue de l’Université, BP12, 76801 Saint Etienne du Rouvray Cedex (France); Loyer-Prost, M. [DMN/SRMP, CEA/Saclay, Building 520, 91191 Gif sur Yvette Cedex (France); Rouffié, A.L. [DMN/SRMA, CEA/Saclay, Building 455, 91191 Gif sur Yvette Cedex (France); Sallez, N. [SIMAP, UMR CNRS 5266, INPG, Domaine Universitaire, 1130 rue de la Piscine, BP75, 38402 Saint Martin d’Hères Cedex (France); Salmon-Legagneur, H. [DMN/SRMA, CEA/Saclay, Building 455, 91191 Gif sur Yvette Cedex (France); Schuler, T. [DMN/SRMP, CEA/Saclay, Building 520, 91191 Gif sur Yvette Cedex (France)

2014-12-15

AREVA, CEA, CNRS, EDF and Mécachrome are funding a joint program of basic research on Oxide Dispersion Strengthened Steels (ODISSEE), in support to the development of oxide dispersion strengthened 9–14% Cr ferritic–martensitic steels for the fuel element cladding of future Sodium-cooled fast neutron reactors. The selected objectives and the results obtained so far will be presented concerning (i) physical–chemical characterisation of the nano-clusters as a function of ball-milling process, metallurgical conditions and irradiation, (ii) meso-scale understanding of failure mechanisms under dynamic loading and creep, and, (iii) kinetic modelling of nano-clusters nucleation and α/α′ unmixing.

Oxide dispersion strengthened ferritic steels: a basic research joint program in France

International Nuclear Information System (INIS)

Boutard, J.-L.; Badjeck, V.; Barguet, L.; Barouh, C.; Bhattacharya, A.; Colignon, Y.; Hatzoglou, C.; Loyer-Prost, M.; Rouffié, A.L.; Sallez, N.; Salmon-Legagneur, H.; Schuler, T.

2014-01-01

AREVA, CEA, CNRS, EDF and Mécachrome are funding a joint program of basic research on Oxide Dispersion Strengthened Steels (ODISSEE), in support to the development of oxide dispersion strengthened 9–14% Cr ferritic–martensitic steels for the fuel element cladding of future Sodium-cooled fast neutron reactors. The selected objectives and the results obtained so far will be presented concerning (i) physical–chemical characterisation of the nano-clusters as a function of ball-milling process, metallurgical conditions and irradiation, (ii) meso-scale understanding of failure mechanisms under dynamic loading and creep, and, (iii) kinetic modelling of nano-clusters nucleation and α/α′ unmixing

Biologically Weighted Quantities in Radiotherapy: an EMRP Joint Research Project

Directory of Open Access Journals (Sweden)

Rabus Hans

2014-01-01

Full Text Available Funded within the European Metrology Research Programme (EMRP [1], the joint research project “Biologically weighted quantities in radiotherapy” (BioQuaRT [2] aims to develop measurement and simulation techniques for determining the physical properties of ionising particle tracks on different length scales (about 2 nm to 10 μm, and to investigate the correlation of these track structure characteristics with the biological effects of radiation at the cellular level. Work package 1 develops micro-calorimeter prototypes for the direct measurement of lineal energy and will characterise their response for different ion beams by experiment and modelling. Work package 2 develops techniques to measure particle track structure on different length scales in the nanometre range as well as a measurement device integrating a silicon microdosimeter and a nanodosimeter. Work package 3 investigates the indirect effects of radiation based on probes for quantifying particular radical and reactive oxygen species (ROS. Work package 4 focuses on the biological aspects of radiation damage and will produce data on initial DNA damage and late effects for radiotherapy beams of different qualities. Work package 5 provides evaluated data sets of DNA cross-sections and develops a multi-scale model to address microscopic and nanometric track structure properties. The project consortium includes three linked researchers holding so-called Researcher Excellence Grants, who carry out ancillary investigations such as developing and benchmarking a new biophysical model for induction of early radiation damage and developing methods for the translation of quantities derived from particle track structure to clinical applications in ion beam therapy.

The university and the responsible conduct of research: who is responsible for what?

Science.gov (United States)

Alfredo, Katherine; Hart, Hillary

2011-09-01

Research misconduct has been thoroughly discussed in the literature, but mainly in terms of definitions and prescriptions for proper conduct. Even when case studies are cited, they are generally used as a repository of "lessons learned." What has been lacking from this conversation is how the lessons of responsible conduct of research are imparted in the first place to graduate students, especially those in technical fields such as engineering. Nor has there been much conversation about who is responsible for what in training students in Responsible Conduct of Research or in allocating blame in cases of misconduct. This paper explores three seemingly disparate cases of misconduct-the 2004 plagiarism scandal at Ohio University; the famous Robert Millikan article of 1913, in which his reported data selection did not match his notebooks; and the 1990 fabrication scandal in Dr. Leroy Hood's research lab. Comparing these cases provides a way to look at the relationship between the graduate student (or trainee) and his/her advisor (a relationship that has been shown to be the most influential one for the student) as well as at possibly differential treatment for established researchers and researchers-in-training, in cases of misconduct. This paper reflects on the rights and responsibilities of research advisers and their students and offers suggestions for clarifying both those responsibilities and the particularly murky areas of research-conduct guidelines.

Eating Animals to Build Rapport: Conducting Research as Vegans or Vegetarians

Directory of Open Access Journals (Sweden)

Katie MacDonald

2014-12-01

Full Text Available Notions of hospitality, community, and the fostering of rapport and connection are foundational concerns for conducting research across difference. Drawing on methodological literature, this paper considers how access to various communities and “good” data is structured by the notion that in order to develop rapport researchers accept the “food”, specifically “meat” offered by their hosts. When researchers are vegetarians or vegans, this can entail a conflict in which questions of hospitality, relationships, and responsibility to ethical commitments come to the fore. As such, we analyze methodological literature in which the logic of nonhuman animal sacrifice is considered a means to the ends of research through the development of “rapport”—often coded as an ethical relationship of respect to the participant. We draw on experiences of veg*n researchers to explore how this assumption functions to position the consumption of meat as a necessary undertaking when conducting research, and in turn, denies nonhuman animal subjecthood. We interrogate the assumption that culture and communities are static inasmuch as this literature suggests ways to enter and exit spaces leaving minimal impact, and that posits participants will not trust researchers nor understand their decisions against eating nonhuman animals. We argue that because food consumption is figured as a private and individual choice, animals are not considered subjects in research. Thus, we articulate a means to consider vegan and/or vegetarians politics, not as a marker of difference, but as an attempt to engage in ethical relationships with nonhuman animals. In so doing, we call for the inclusion of nonhuman animals in relationships of hospitality, and thereby attempt to politicize the practice of food consumption while conducting research.

How to conduct research on burnout: Advantages and disadvantages of a unidimensional approach in burnout research

NARCIS (Netherlands)

Brenninkmeijer, V.; Yperen, N. van

2003-01-01

When conducting research on burnout, it may be difficult to decide whether one should report results separately for each burnout dimension or whether one should combine the dimensions. Although the multidimensionality of the burnout concept is widely acknowledged, for research purposes it is

How to conduct research on burnout: Advantages and disadvantages of a unidimensional approach in burnout research.

NARCIS (Netherlands)

Brenninkmeijer, V.; Van Yperen, N.W.

When conducting research on burnout, it may be difficult to decide whether one should report results separately for each burnout dimension or whether one should combine the dimensions. Although the multidimensionality of the burnout concept is widely acknowledged, for research purposes it is

Research on Deep Joints and Lode Extension Based on Digital Borehole Camera Technology

Directory of Open Access Journals (Sweden)

Han Zengqiang

2015-09-01

Full Text Available Structure characteristics of rock and orebody in deep borehole are obtained by borehole camera technology. By investigating on the joints and fissures in Shapinggou molybdenum mine, the dominant orientation of joint fissure in surrounding rock and orebody were statistically analyzed. Applying the theory of metallogeny and geostatistics, the relationship between joint fissure and lode’s extension direction is explored. The results indicate that joints in the orebody of ZK61borehole have only one dominant orientation SE126° ∠68°, however, the dominant orientations of joints in surrounding rock were SE118° ∠73°, SW225° ∠70° and SE122° ∠65°, NE79° ∠63°. Then a preliminary conclusion showed that the lode’s extension direction is specific and it is influenced by joints of surrounding rock. Results of other boreholes are generally agree well with the ZK61, suggesting the analysis reliably reflects the lode’s extension properties and the conclusion presents important references for deep ore prospecting.

Doing global science a guide to responsible conduct in the global research enterprise

CERN Document Server

InterAcademy Partnership

2016-01-01

This concise introductory guide explains the values that should inform the responsible conduct of scientific research in today's global setting. Featuring accessible discussions and ample real-world scenarios, Doing Global Science covers proper conduct, fraud and bias, the researcher's responsibilities to society, communication with the public, and much more. The book places special emphasis on the international and highly networked environment in which modern research is done, presenting science as an enterprise that is being transformed by globalization, interdisciplinary research projects, team science, and information technologies. Accessibly written by an InterAcademy Partnership committee comprised of leading scientists from around the world, Doing Global Science is required reading for students, practitioners, and anyone concerned about the responsible conduct of science today.

Summary of joint researches with universities for fiscal 2001. Except public subscription type nuclear cycle researches and proceeding basic engineering researches

International Nuclear Information System (INIS)

2002-07-01

A summary of ten researches is reported in this report. The subjects of studies are as followings; 1) the transfer rate of nuclide in the nuclear fuel recycle system, 2) burn up behavior of sodium drop, 3) high advance in evaluation method of crack growth of FBR plant, 4) multidimensional analysis of vapor-liquid phase flow in the evaporator helical coil, 5) a joint research of corrosion test of liquid lead and bismuth eutectic alloy, 6) separation of ruthenium from high level radioactive waste and it's behavior in the fused glass, 7) improvement and long lifetime of control rod by high power millimeter wave ceramics sintering method, 8) development of fatigue test equipment in order to make clear ultra long lifetime fatigue strength properties under high temperature, 9) evaluation of solubility of metal elements in lead bismuth eutectic (LBE) under the condition of control of oxygen concentration, 10) evaluation of solubility of metal elements in LBE under the condition of very low oxygen potential. (S.Y.)

Conducting Field Research on Terrorism: a Brief Primer

Directory of Open Access Journals (Sweden)

Adam Dolnik

2011-05-01

Full Text Available This article focuses on the practical aspects of field research on terrorism. Firstly, it  outlines some issues involved in the process of attaining a human research ethics/institutional review board clearance in order to be able to even begin the field research. It suggests some ways in which researchers can positively influence this review process in their favor. Secondly, the article focuses on the real and perceived dangers of field research, identifying practical steps and preparatory activities that can help researchers manage and reduce the risks involved. The article also covers the formalities and dilemmas involved in gaining access to the field. It then provides some insights into the topic of operating in conflict zones, followed by a section covering the ways of gaining access to sources, effective communication skills and influence techniques and addresses key issues involved in interviewing sources in the field. The final section focuses on identifying biases and interfering factors which researchers need to take into account when interpreting the data acquired through interviews. This article is a modest attempt to fill a gap in the literature on terrorism research by outlining some of the key issues involved in the process of doing field research. It incorporates insights from diverse disciplines as well as the author’s personal experiences of conducting field research on terrorism in places like Afghanistan, Pakistan, Chechnya, Ingushetia, Colombia, Mindanao, Uganda, Indonesia, Democratic Republic of Congo, Sudan, and India.

Conduct Research on the Foraging Ecology of Beaked Whales in Hawaiian Waters

Science.gov (United States)

2012-09-30

1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Conduct Research on the Foraging Ecology of Beaked...number. 1. REPORT DATE 2012 2. REPORT TYPE N/A 3. DATES COVERED - 4. TITLE AND SUBTITLE Conduct Research on the Foraging Ecology of...R., Wiggins, S., and Hildebrand, J. (2008). “Temporal pattern in the acoustic signals of beaked whales at Cross Seamount .” Biol. Lett. 4, 208-211

ECOWindS Joint Action Plan

DEFF Research Database (Denmark)

2014-01-01

The Joint Action Plan (JAP) is a deliverable of the ECOWindS project Work Package 4 (WP4) “Joint Action Plan”. It presents a plan of action or a roadmap for research, development, and innovation (RDI) for the Offshore Wind Service (OWS) industry. The objective of the JAP is to be an international...

Assessment of Intellectual Capital in Joint-Stock Companies

Directory of Open Access Journals (Sweden)

Rima Tamošiūnienė

2015-12-01

Full Text Available The evaluation of intellectual capital factors is an essential part for the management of joint-stock companies. Many authors indicate that successful intellectual capital management increases value added in joint-stock companies. Nevertheless, intellectual capital is a complex and challenging concept as there is still no clear guidance, what the intellectual capital features and its structural parts are. Theoretical research revealed that scientists accentuate various intellectual capital parts depending basically on the type of their research, on the level of the research (micro, mezzo, macro, variables they selected to investigate and similar. This research paper gives an insight what drivers can be increasing value added in joint-stock companies.

Responsible Code of Conduct for the Life Science and Dual-Use Research

International Nuclear Information System (INIS)

Bokan, S.

2007-01-01

The potential threat from misuse of current and future Dual-Use research in the field of NBC Defense is challenge to which scientific community must respond. The rapid advances in the life sciences and the worldwide growth of biotechnology industry only add urgency of this task. Code of conduct is formal statement of values and professional practices of a group of individuals with a common focus, either an occupation, academic field, or social doctrine. Codes of conduct can help to reduce the risk that scientific research will be misused. 'Dual-use' is a term often used in politics and diplomacy to refer to technology which can be used for both peaceful and military aims, usually in regard to the proliferation of nuclear weapons. Dual-use information and 'know-how' in the field of NBC defense are covered under the Export control regimes. Nearly all WMD production equipment is 'dual-use' and only very large capacity equipment is export controlled. Research in the life sciences, including NBC defense research must be conducted safely, securely, and ethically. Development of an international harmonized regime for control of biological and chemical warfare agents within and between laboratories and facilities is very important. This paper will present very important consideration of the content, promulgation and adoption of codes of conduct for scientists in the field of NBC research, for inducing of discussion between scientists into group of CBMTS members with aim how improve protection of sensitive research results and information in the field of NBC Defense sciences. (author)

Guidelines for conducting rigorous health care psychosocial cross-cultural/language qualitative research.

Science.gov (United States)

Arriaza, Pablo; Nedjat-Haiem, Frances; Lee, Hee Yun; Martin, Shadi S

2015-01-01

The purpose of this article is to synthesize and chronicle the authors' experiences as four bilingual and bicultural researchers, each experienced in conducting cross-cultural/cross-language qualitative research. Through narrative descriptions of experiences with Latinos, Iranians, and Hmong refugees, the authors discuss their rewards, challenges, and methods of enhancing rigor, trustworthiness, and transparency when conducting cross-cultural/cross-language research. The authors discuss and explore how to effectively manage cross-cultural qualitative data, how to effectively use interpreters and translators, how to identify best methods of transcribing data, and the role of creating strong community relationships. The authors provide guidelines for health care professionals to consider when engaging in cross-cultural qualitative research.

Achievement reports on joint research of solar energy power generation field test project in fiscal 1997. Part 2 of 3; 1997 nendo taiyoko hatsuden field test jigyo kyodo kenkyu seika hokokusho 2/3

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-08-01

This report is a collection of 26 achievement reports on joint research of a solar energy power generation field test project. The major contents of the achievement reports relate to the solar energy power generation field test project (summarized as manufacture and installation of solar energy power generation systems, summary of solar energy power generation facilities, peripheral devices, and daily schedule of the construction). The reports describe achievements of the joint research (names and achievements of the joint research, study presentation, lectures, literatures, status of patents, similar research in and cooperation with other research institutions), generalization of the research, and future problems. Locations of the joint research carried out are libraries, kindergartens, health and welfare centers, children's culture centers, general traffic centers, primary and middle schools, river water purifying facilities, credit banks, manufactories, retail shops at car parking areas, office buildings, hospitals, joint prefectural office buildings, municipal health centers, and prefectural general power generation control stations. (NEDO)

Estimation of soil salinity in a drip irrigation system by using joint inversion of multicoil electromagnetic induction measurements

KAUST Repository

Jadoon, Khan Zaib

2015-05-12

Low frequency electromagnetic induction (EMI) is becoming a useful tool for soil characterization due to its fast measurement capability and sensitivity to soil moisture and salinity. In this research, a new EMI system (the CMD mini-Explorer) is used for subsurface characterization of soil salinity in a drip irrigation system via a joint inversion approach of multiconfiguration EMI measurements. EMI measurements were conducted across a farm where Acacia trees are irrigated with brackish water. In situ measurements of vertical bulk electrical conductivity (σb) were recorded in different pits along one of the transects to calibrate the EMI measurements and to compare with the modeled electrical conductivity (σ) obtained by the joint inversion of multiconfiguration EMI measurements. Estimates of σ were then converted into the universal standard of soil salinity measurement (i.e., electrical conductivity of a saturated soil paste extract – ECe). Soil apparent electrical conductivity (ECa) was repeatedly measured with the CMD mini-Explorer to investigate the temperature stability of the new system at a fixed location, where the ambient air temperature increased from 26°C to 46°C. Results indicate that the new EMI system is very stable in high temperature environments, especially above 40°C, where most other approaches give unstable measurements. In addition, the distribution pattern of soil salinity is well estimated quantitatively by the joint inversion of multicomponent EMI measurements. The approach of joint inversion of EMI measurements allows for the quantitative mapping of the soil salinity distribution pattern and can be utilized for the management of soil salinity.

Research on advanced technology of performance assessment for geological disposal of high-level radioactive waste (Joint research)

International Nuclear Information System (INIS)

2006-12-01

JAEA and RWMC have carried out a joint research program on advanced technologies that could be used to support performance assessments of geological disposal concepts for high-level radioactive waste. The following 5 items were considered in the program: 1) planning of a basic strategy for the development of analysis technologies on nuclide migration over various spatial and temporal scales; 2) development of analysis technologies for vitrified waste scale; 3) development of analysis technologies for repository scale; 4) development of integration technologies for geochemical information; and 5) development of technologies to promote the logical understanding of repository performance and safety. The above items were discussed in the context of technological experiences gained by JAEA and RWMC in previous repository-related studies. According to the results of these discussions, development strategies for each of the technology areas identified above were efficiently formulated by appropriate task allocations. Specific technical subjects requiring further investigation were also identified using this approach, and potential feed-backs from the results of these investigations into the overall research plan and strategy were considered. These specific research and development subjects in the overall strategy defined by this project should be implemented in the future. (author)

Restriction in participation in leisure activities after joint replacement: an exploratory study.

Science.gov (United States)

Wylde, Vikki; Livesey, Christine; Blom, Ashley W

2012-03-01

currently, assessment of outcomes after joint replacement is predominantly centred on impairment and activity limitation (e.g. walking), with little consideration of participation restriction. structured telephone interviews about participation in leisure activities were conducted with 56 total hip replacement (THR) and 60 total knee replacement (TKR) patients before and 1 year after joint replacement. before surgery, THR patients participated in 209 leisure activities, with an average of four leisure activities per person. TKR patients participated in 171 leisure activities, with an average of three leisure activities per person. The leisure activities were coded into four categories: sports/exercise, hobbies, social activities and holidays. Between 89 and 95% of leisure activities were rated as important by THR and TKR patients prior to surgery. Before surgery, THR patients rated 82% of leisure activities as difficult to perform because of joint problems, which decreased to 25% of leisure activities by 1-year after surgery. TKR patients rated 86% of leisure activities as difficult to perform because of joint problems, which decreased to 32% after surgery. this research highlights that participation in leisure activities is important to patients undergoing joint replacement, but that approximately a quarter of patients are unable to perform their valued leisure activities after surgery.

Responsible Conduct of Research in Communication Sciences and Disorders: Faculty and Student Perceptions

Science.gov (United States)

Minifie, Fred D.; Robey, Randall R.; Horner, Jennifer; Ingham, Janis C.; Lansing, Charissa; McCartney, James H.; Alldredge, Elham-Eid; Slater, Sarah C.; Moss, Sharon E.

2011-01-01

Purpose: Two Web-based surveys (Surveys I and II) were used to assess perceptions of faculty and students in Communication Sciences and Disorders (CSD) regarding the responsible conduct of research (RCR). Method: Survey questions addressed 9 RCR domains thought important to the responsible conduct of research: (a) human subjects protections; (b)…

30 CFR 280.11 - What must I do before I may conduct scientific research?

Science.gov (United States)

2010-07-01

... Apply for a Permit or File a Notice § 280.11 What must I do before I may conduct scientific research? You may conduct G&G scientific research activities related to hard minerals on the OCS only after you... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What must I do before I may conduct scientific...

Research Ethics I: Responsible Conduct of Research (RCR)--Historical and Contemporary Issues Pertaining to Human and Animal Experimentation

Science.gov (United States)

Horner, Jennifer; Minifie, Fred D.

2011-01-01

Purpose: In this series of articles--"Research Ethics I", "Research Ethics II", and "Research Ethics III"--the authors provide a comprehensive review of the 9 core domains for the responsible conduct of research (RCR) as articulated by the Office of Research Integrity. In "Research Ethics I", they present a historical overview of the evolution of…

Published research studies conducted amongst Indian medical undergraduate students: Bibliometric Analysis

Directory of Open Access Journals (Sweden)

Sandeep Sachdeva

2017-09-01

Full Text Available Objective: Evaluation of published original research conducted amongst Indian medical undergraduate students. Methodology: A systematic review was undertaken using keywords “MBBS students” or “medical students” or “health students” or “university students” and “India” through search engines, PUBMED and Google scholar. Considering feasibility, time frame of published original research article was restricted to one-year only i.e. 2016. Research domain, research design, author and other bibliometric details of research manuscript were captured using check-list and analysis carried out using descriptive statistics. Results: A total of 99 suitable original research articles were identified under certain criteria and considered in present analysis. With regard to thematic research domain, highest, 29 (29.2% articles were related to teaching and learning process followed by 13 (13.1% to mental health (depression, anxiety, sleep, spirituality of students; 07 (7.0% were based on physical fitness/ exercise/yoga; and substance abuse (6.0% amongst medical students etc. Nearly, 86 (86.8% of articles were cross-sectional descriptive based studies while 13 (13.1% had intervention based research design. A total of 34 (34.3% research articles could be labeled as “KAP” (knowledge, attitude and practice survey. Department wise detail of corresponding author was largely dominated by faculty from pre and para-clinical departments. Highest was community medicine in (35.3% articles, pharmacology (23.2%, physiology (17.1%, microbiology (6.0%, and biochemistry (4.0% etc. The studies covered an average sample size of 188.8 MBBS students (20-360, range; 57.5% of research article covered students from only one professional year. However, in 42 (42.4% articles there was no further mention of gender based sample information. Out of all the references used in research articles, only 57.3% were of recent (2005-2015 origin while the rest were from older

Current state and future directions of research and development in conducting polymers

International Nuclear Information System (INIS)

Spinks, G.M.; Innis, P.C.; Lewis, T.W.; Kane-Maghire, L.A.P.; Wallace, G.G.

2000-01-01

Polymers that inherently conduct electricity have been researched intensively for a little over 20 years. An enormous research effort in academic and industrial institutions has resulted in over 17,000 publications published in the last 10 years alone. Significant advances in the synthesis of new polymers and the methods for processing these polymers into products have resulted from this research activity. A number of commercial developments have emerged, some of which have reached maturity as marketed products. Some others have failed in the marketplace. The diversity of applications for conducting polymers continues to fuel research and development and ensures that new products will emerge over the foreseeable future. In the more distant future, truly intelligent polymer systems remain as an achievable objective. By developing appropriate processing and fabrication technologies, it should be possible to integrate sensing, actuating and energy storage functions into a single system. Further developments in self-assembly of conducting polymers from the nano- to the meso-scale will open up applications in MEMS and nanotechnology

Conducting Research with LGB People of Color: Methodological Challenges and Strategies

Science.gov (United States)

DeBlaere, Cirleen; Brewster, Melanie E.; Sarkees, Anthony; Moradi, Bonnie

2010-01-01

Methodological barriers have been highlighted as a primary reason for the limited research with lesbian, gay, and bisexual (LGB) people of color. Thus, strategies for anticipating and addressing potential methodological barriers are needed. To address this need, this article discusses potential challenges associated with conducting research with…

Report for fiscal 1998 on the international joint research project of medical welfare equipment; Iryo fukushi kiki kokusai kyodo kenkyu jigyo 1998 nendo chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

In connection with the international joint research project of medical welfare, a report was made on the results of the investigation conducted in 1998 concerning the technology of overseas medical welfare equipment. In the investigation of china, observation was made on the actual state of the representative medial institutions, with opinions exchanged. Obsolete equipment and old technology are the present state in China, which is strongly desirous of exchanging information with Japan. In Taiwan, being full of venture spirit, an ultrasonic thermal treatment apparatus and an ultrasonic echo device have been produced for example. In Europe, an observation tour was conducted on a German manipulator and process robot while an investigative visit and exchange of opinions were made on the living environment and facilities in Italian training center for physically handicapped persons. Japan's self-supporting and assisting system for excretion attracted many questions and comments. In the investigation in the U.S., views were exchanged concerning '{sup 13}C-MRS device for non-invasion brain metabolic measurement' in research institutions such as universities. A machine developed in Japan received a high evaluation in that {sup 13}C spectrum was obtained from a substantial depth. (NEDO)

Preliminary reports on fiscal 2000 results of project for subsidizing international joint research; 2000 nendo kokusai kyodo kenkyu josei jigyo seika hokoku kai yokoshu

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-12-01

This paper presents preliminary reports on fiscal 2000 results of project for subsidizing international joint research sponsored by NEDO. For international joint research teams doing excellent studies, their research expenses are subsidized, thereby promoting international research exchange, enhancing international level of industrial technology and contributing to the formation of basis for innovative industrial technology. The projects relating to the global environmental field are implemented jointly with RITE. The contents of the report to be published are, in the global environmental field (practicability study), development of oil substitute resources, reproducible resources, and technologies for producing polymeric and plastic materials benign to the earth by microorganism using carbon dioxide. In the substance/material field, the contents of the report are innovative production and device application of tunable photonic crystals using electronic penetration network; development of new synthesis process of innovative nitride, creation and theoretical calculation of electromagnetic function; studies on quantum transportation in superconductor and semiconductor bonding structures; and studies on quantum liquid and solid, and application to materials science and technology. (NEDO)

Conducting Research as a Visiting Scientist in a Women’s Prison

Science.gov (United States)

Byrne, Mary Woods

2006-01-01

Incarcerated populations have disparities in health risks and illness conditions meriting study, but the history of prison research is marred by unethical conduct. Ethical participation strategies are discussed in the context of studies implemented by the author in a state prison system. This study used ethnographic approaches, observed adherence to federal and institutional review board regulations and corrections department directives, and maintained continuous communication with vested interests to provide entry and long-term access for studies on female prisoners and their civilian infants. A culture clash between the punitive restrictive environment that serves the custody–control–care mission of corrections systems and the open inquiry environment needed for conduct of health research exists. Federal regulations protect prisoners as human subjects but additional vigilance and communication by researchers are required. Gaining and maintaining access to prison inmates for nursing research are leadership challenges that can be met within the caring and collaborative paradigm of nursing. PMID:16061169

Procedure versus process: ethical paradigms and the conduct of qualitative research.

Science.gov (United States)

Pollock, Kristian

2012-09-27

Research is fundamental to improving the quality of health care. The need for regulation of research is clear. However, the bureaucratic complexity of research governance has raised concerns that the regulatory mechanisms intended to protect participants now threaten to undermine or stifle the research enterprise, especially as this relates to sensitive topics and hard to reach groups. Much criticism of research governance has focused on long delays in obtaining ethical approvals, restrictions imposed on study conduct, and the inappropriateness of evaluating qualitative studies within the methodological and risk assessment frameworks applied to biomedical and clinical research. Less attention has been given to the different epistemologies underlying biomedical and qualitative investigation. The bioethical framework underpinning current regulatory structures is fundamentally at odds with the practice of emergent, negotiated micro-ethics required in qualitative research. The complex and shifting nature of real world settings delivers unanticipated ethical issues and (occasionally) genuine dilemmas which go beyond easy or formulaic 'procedural' resolution. This is not to say that qualitative studies are 'unethical' but that their ethical nature can only be safeguarded through the practice of 'micro-ethics' based on the judgement and integrity of researchers in the field. This paper considers the implications of contrasting ethical paradigms for the conduct of qualitative research and the value of 'empirical ethics' as a means of liberating qualitative (and other) research from an outmoded and unduly restrictive research governance framework based on abstract prinicipalism, divorced from real world contexts and values.

Space Suit Joint Torque Measurement Method Validation

Science.gov (United States)

Valish, Dana; Eversley, Karina

2012-01-01

In 2009 and early 2010, a test method was developed and performed to quantify the torque required to manipulate joints in several existing operational and prototype space suits. This was done in an effort to develop joint torque requirements appropriate for a new Constellation Program space suit system. The same test method was levied on the Constellation space suit contractors to verify that their suit design met the requirements. However, because the original test was set up and conducted by a single test operator there was some question as to whether this method was repeatable enough to be considered a standard verification method for Constellation or other future development programs. In order to validate the method itself, a representative subset of the previous test was repeated, using the same information that would be available to space suit contractors, but set up and conducted by someone not familiar with the previous test. The resultant data was compared using graphical and statistical analysis; the results indicated a significant variance in values reported for a subset of the re-tested joints. Potential variables that could have affected the data were identified and a third round of testing was conducted in an attempt to eliminate and/or quantify the effects of these variables. The results of the third test effort will be used to determine whether or not the proposed joint torque methodology can be applied to future space suit development contracts.

Tsinghua-Johns Hopkins Joint Center for Biomedical Engineering Research: scientific and cultural exchange in undergraduate engineering.

Science.gov (United States)

Wisneski, Andrew D; Huang, Lixia; Hong, Bo; Wang, Xiaoqin

2011-01-01

A model for an international undergraduate biomedical engineering research exchange program is outlined. In 2008, the Johns Hopkins University in collaboration with Tsinghua University in Beijing, China established the Tsinghua-Johns Hopkins Joint Center for Biomedical Engineering Research. Undergraduate biomedical engineering students from both universities are offered the opportunity to participate in research at the overseas institution. Programs such as these will not only provide research experiences for undergraduates but valuable cultural exchange and enrichment as well. Currently, strict course scheduling and rigorous curricula in most biomedical engineering programs may present obstacles for students to partake in study abroad opportunities. Universities are encouraged to harbor abroad opportunities for undergraduate engineering students, for which this particular program can serve as a model.

Problems of Conducting Research in Organizations: The Case of Police Departments.

Science.gov (United States)

Lefkowitz, Joel

This paper presents a description of police research problems in such fashion that it could be generalized to other types of organizations. A two-dimensional taxonomy of problems in conducting psychological research in police departments is discussed. The first dimension concerns generality-uniqueness of the problem, relative to formal…

Research Institute for Technical Careers

Science.gov (United States)

Glenn, Ronald L.

1996-01-01

The NASA research grant to Wilberforce University enabled us to establish the Research Institute for Technical Careers (RITC) in order to improve the teaching of science and engineering at Wilberforce. The major components of the research grant are infrastructure development, establishment of the Wilberforce Intensive Summer Experience (WISE), and Joint Research Collaborations with NASA Scientists. (A) Infrastructure Development. The NASA grant has enabled us to improve the standard of our chemistry laboratory and establish the electronics, design, and robotics laboratories. These laboratories have significantly improved the level of instruction at Wilberforce University. (B) Wilberforce Intensive Summer Experience (WISE). The WISE program is a science and engineering bridge program for prefreshman students. It is an intensive academic experience designed to strengthen students' knowledge in mathematics, science, engineering, computing skills, and writing. (C) Joint Collaboration. Another feature of the grant is research collaborations between NASA Scientists and Wilberforce University Scientists. These collaborations have enabled our faculty and students to conduct research at NASA Lewis during the summer and publish research findings in various journals and scientific proceedings.

Report of researches by joint use of Kyoto University Research Reactor Institute in the first half of the fiscal year 1979

International Nuclear Information System (INIS)

1981-03-01

This is the biannual report of 55 research items by the joint use of the reactor, each item being written in a page. The number of items decreased by 14 as compared with the items in the second half of the fiscal year of 1978. The research items are roughly classified into 16 items related to chemistry, 11 items to physics, 15 items to biology and medicine, 5 items to metallurgy, 4 items to geology, and other 4 items. It can be said that the ratio of the items related to biology and medicine among the whole items has increased as the total number decreased. Also, the number of the items concerning activation analysis reached 7. (Wakatsuki, Y.)

Report on a joint research project. Japan and the Republic of Kazakhstan

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

A joint research project was agreed between the Metal Mining Industry Association of Japan and the Non-ferrous Metal Mining Research Institute for the Eastern Region of the Republic of Kazakhstan on March 15,1995. The project is intended to extract from low-grade ores and mine refuses such useful metals as gold, silver, copper and rare metals by using a method harmonious with environment. Tests and researches are being performed targeting the completion in fiscal 2000. This paper reports the achievements attained in fiscal 1997. Detailed descriptions are given in the report on the column percolation test and the mechanical stirring percolation test for low-grade ores in Nikolayevska, and the mechanical stirring percolation test for mine refuses in Zhezkent. In addition, for the bacteria percolation test, the paper reports execution of the bacteria culture test, and the fundamental percolating condition test using concentrated copper solution. Furthermore, fundamental zinc extraction tests in an extraction test and a reversal extraction test, analysis of gold and silver, a percolation test thereon by using cyanide, and analysis of waste solution were performed with related discussions. (NEDO)

Prevalence of Concomitant Sacroiliac joint Dysfunction in Patients With Image Proven Herniated Lumbar Discs

Directory of Open Access Journals (Sweden)

Salah Alalawi

2009-05-01

Full Text Available Background:Sacroiliac joint (SIJ dysfunction is a widely known but poorly defined cause of low back pain. To our knowledge, few published studies have been conducted to evaluate systematically the prevalence and significance of concomitant sacroiliac joint dysfunction in patients with herniated lumbar discs. As concomitant SIJ dysfunction in low back pain patients is likely to respond to particular noninvasive interventions such as manipulation,improved understanding of the relationship between these two diagnoses would improve clinical decision making and research.Methods:This study was designated to estimate the prevalence of concomitant sacroiliac joint dysfunction in sub acute low back pain patients with image proven discopathy and evaluate the theory that sacroiliac joint dysfunction can be a source of pain and functional disability in discopathy. A total of 202 patients with sub acute radicular back pain and MRI proven herniated lumbar discs underwent standardized   physiatrist history and physical examination, specified for detection of concomitant sacroiliac joint dysfunction.Results: Sacroiliac joint dysfunction is a concomitant finding in 72.3% of evaluated patients.There was significantly higher SIJ dysfunction prevalence in female patients (p <0.0001. Conclusion: SIJ dysfunction is a significant pathogenic factor with high possibility of occurrence in low back pain. Thus, in the presence of radicular and sacroiliac joint symptoms, SIJ dysfunction, regardless of intervertebral disc pathology, must be considered in clinical decisiomaking.

Logistical Challenges and Opportunities for Conducting Peer Nomination Research in Schools

Science.gov (United States)

Mayeux, Lara; Kraft, Caroline

2017-01-01

Although conducting psychological research within schools has always required effort, persistence, and the careful navigation of various interests, there is a consensus among child and adolescent researchers that, over the past 2 decades, it has become increasingly difficult to collect data within schools. In this chapter, we lay out common and…

Achievement reports on joint research of solar energy power generation field test project in fiscal 1997. Part 3 of 3; 1997 nendo taiyoko hatsuden field test jigyo kyodo kenkyu seika hokokusho 3/3

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-08-01

This report is a collection of 40 achievement reports on joint research of a solar energy power generation field test project. The major contents of the achievement reports relate to the solar energy power generation field test project (summarized as manufacture and installation of solar energy power generation systems, summary of solar energy power generation facilities, status of installation of solar cells, peripheral devices, and daily schedule of the construction). The reports describe achievements of the joint research (names and achievements of the joint research, study presentation, lectures, literatures, status of patents, similar research in and cooperation with other research institutions), generalization of the research, and future problems. Locations of the joint research carried out are hospitals, township hospitals, a science hall for youths, study and educational cities, primary schools, middle schools, high schools, universities, senior health centers, a life cooperative association, retails shops, factories, office buildings, joint governmental office buildings, Shinkansen stations, prefectural industrial testing centers, health and welfare centers, FM broadcasting studios, a town operated hall of technologies, prefectural office buildings and training centers. (NEDO)

Space shuttle SRM field joint: Review paper

Directory of Open Access Journals (Sweden)

S. Mohammad Gharouni

2014-09-01

Full Text Available Due to Challenger space shuttle accident in 1986, significant research has been done concerning structural behavior of field joints in solid rocket boosters (SRB. The structural deformations between the clevis inner leg and the tang (male-to-female parts of joint, the sealing of the O-ring to prevent the hot gas in joints, has been neglected causing the failure of the vehicle. Redesigning the field joint in SRB engine by accurate analysis of dynamic and thermal loads and by design of insulator and good O-ring, the leakiness of combustion hot gases was eliminated. Some parts of field joint such as capture feature (CF and its third O-ring, J-leg insulator and shim were added to redesigned field joint. Also, some adjustments in sealing system and pins were done to promote the efficiency of the field joint. Due to different experimental analysis on assembled field joints with default imperfections, redesigned joints operated well. These redesigned field joints are commonly used in aerospace and mechanical structures. This paper investigates the original and the redesigned field joints with additional explanations of different parts of the redesigned joints.

Biofluid lubrication for artificial joints

Science.gov (United States)

Pendleton, Alice Mae

This research investigated biofluid lubrication related to artificial joints using tribological and rheological approaches. Biofluids studied here represent two categories of fluids, base fluids and nanostructured biofluids. Base fluids were studied through comparison of synthetic fluids (simulated body fluid and hyaluronic acid) as well as natural biofluids (from dogs, horses, and humans) in terms of viscosity and fluid shear stress. The nano-structured biofluids were formed using molecules having well-defined shapes. Understanding nano-structured biofluids leads to new ways of design and synthesis of biofluids that are beneficial for artificial joint performance. Experimental approaches were utilized in the present research. This includes basic analysis of biofluids' property, such as viscosity, fluid shear stress, and shear rate using rheological experiments. Tribological investigation and surface characterization were conducted in order to understand effects of molecular and nanostructures on fluid lubrication. Workpiece surface structure and wear mechanisms were investigated using a scanning electron microscope and a transmission electron microscope. The surface topography was examined using a profilometer. The results demonstrated that with the adding of solid additives, such as crown ether or fullerene acted as rough as the other solids in the 3-body wear systems. In addition, the fullerene supplied low friction and low wear, which designates the lubrication purpose of this particular particle system. This dissertation is constructed of six chapters. The first chapter is an introduction to body fluids, as mentioned earlier. After Chapter II, it examines the motivation and approach of the present research, Chapter III discusses the experimental approaches, including materials, experimental setup, and conditions. In Chapter IV, lubrication properties of various fluids are discussed. The tribological properties and performance nanostructured biofluids are

West Indian Ocean Deltas Exchange and Research Network | IDRC ...

International Development Research Centre (IDRC) Digital Library (Canada)

The Collaborative Adaptation Research Initiative in Africa and Asia (CARIAA) aims to build the resilience of poor people to climate change by supporting a network of consortia to conduct high-calibre research and policy engagement in hot spots in Africa and Asia. It is jointly funded by the UK's Department for International ...

Procedure versus process: ethical paradigms and the conduct of qualitative research

Science.gov (United States)

2012-01-01

Background Research is fundamental to improving the quality of health care. The need for regulation of research is clear. However, the bureaucratic complexity of research governance has raised concerns that the regulatory mechanisms intended to protect participants now threaten to undermine or stifle the research enterprise, especially as this relates to sensitive topics and hard to reach groups. Discussion Much criticism of research governance has focused on long delays in obtaining ethical approvals, restrictions imposed on study conduct, and the inappropriateness of evaluating qualitative studies within the methodological and risk assessment frameworks applied to biomedical and clinical research. Less attention has been given to the different epistemologies underlying biomedical and qualitative investigation. The bioethical framework underpinning current regulatory structures is fundamentally at odds with the practice of emergent, negotiated micro-ethics required in qualitative research. The complex and shifting nature of real world settings delivers unanticipated ethical issues and (occasionally) genuine dilemmas which go beyond easy or formulaic ‘procedural’ resolution. This is not to say that qualitative studies are ‘unethical’ but that their ethical nature can only be safeguarded through the practice of ‘micro-ethics’ based on the judgement and integrity of researchers in the field. Summary This paper considers the implications of contrasting ethical paradigms for the conduct of qualitative research and the value of ‘empirical ethics’ as a means of liberating qualitative (and other) research from an outmoded and unduly restrictive research governance framework based on abstract prinicipalism, divorced from real world contexts and values. PMID:23016663

Joint attention in Down syndrome: A meta-analysis.

Science.gov (United States)

Hahn, Laura J; Loveall, Susan J; Savoy, Madison T; Neumann, Allie M; Ikuta, Toshikazu

2018-07-01

Some studies have indicated that joint attention may be a relative strength in Down syndrome (DS), but other studies have not. To conduct a meta-analysis of joint attention in DS to more conclusively determine if this is a relative strength or weakness when compared to children with typical development (TD), developmental disabilities (DD), and autism spectrum disorder (ASD). Journal articles published before September 13, 2016, were identified by using the search terms "Down syndrome" and "joint attention" or "coordinating attention". Identified studies were reviewed and coded for inclusion criteria, descriptive information, and outcome variables. Eleven studies (553 participants) met inclusion criteria. Children with DS showed similar joint attention as TD children and higher joint attention than children with DD and ASD. Meta-regression revealed a significant association between age and joint attention effect sizes in the DS vs. TD contrast. Joint attention appears to not be a weakness for children with DS, but may be commensurate with developmental level. Joint attention may be a relative strength in comparison to other skills associated with the DS behavioral phenotype. Early interventions for children with DS may benefit from leveraging joint attention skills. Copyright © 2018 Elsevier Ltd. All rights reserved.

Aligning Objectives and Assessment in Responsible Conduct of Research Instruction

Science.gov (United States)

Antes, Alison L.; DuBois, James M.

2014-01-01

Efforts to advance research integrity in light of concerns about misbehavior in research rely heavily on education in the responsible conduct of research (RCR). However, there is limited evidence for the effectiveness of RCR instruction as a remedy. Assessment is essential in RCR education if the research community wishes to expend the effort of instructors, students, and trainees wisely. This article presents key considerations that instructors and course directors must consider in aligning learning objectives with instructional methods and assessment measures, and it provides illustrative examples. Above all, in order for RCR educators to assess outcomes more effectively, they must align assessment to their learning objectives and attend to the validity of the measures used. PMID:25574258

Critical joints in large composite primary aircraft structures. Volume 1: Technical summary

Science.gov (United States)

Bunin, Bruce L.

1985-01-01

A program was conducted at Douglas Aircraft Company to develop the technology for critical joints in composite wing structure that meets all the design requirements of a 1990 commercial transport aircraft. In fulfilling this objective, analytical procedures for joint design and analysis were developed during Phase 1 of the program. Tests were conducted at the element level to supply the empirical data required for methods development. Large composite multirow joints were tested to verify the selected design concepts and for correlation with analysis predictions. The Phase 2 program included additional tests to provide joint design and analysis data, and culminated with several technology demonstration tests of a major joint area representative of a commercial transport wing. The technology demonstration program of Phase 2 is discussed. The analysis methodology development, structural test program, and correlation between test results and analytical strength predictions are reviewed.

How Not to Let Secrets Out When Conducting Qualitative Research With Dyads.

Science.gov (United States)

Ummel, Deborah; Achille, Marie

2016-05-01

Confidentiality is one of the cornerstones of research involving human participants. Researchers are the frontline gatekeepers of their participants' right to confidentiality, and situations can arise that challenge this responsibility. This is the case when individuals who have shared a common experience (i.e., dyads) are interviewed separately, but interview results are disseminated within the context of dyads. Based on our experience of conducting research with dyads and given how little literature is available to serve as guide, we set out to write this article to share the knowledge we acquired and the solutions we found. We will describe both the ethical challenges and the methodological decisions involved in conducting qualitative research with dyads. The article also describes different modalities of dyadic analysis, their benefits and drawbacks. This endeavor seems especially relevant as research with dyads is emerging in several domains involving couples, families, caregivers and health. © The Author(s) 2016.

Does generalized joint hypermobility predict joint injury in sport? A review.

LENUS (Irish Health Repository)

Donaldson, Peter R

2012-02-01

OBJECTIVE: To determine whether persons with generalized joint hypermobility have an increased risk of lower limb joint injury during sport. DATA SOURCES: PubMed, CINAHL, EMBASE, and SportDiscus were searched through February 2009, without language restrictions, using terms related to risk; hip, ankle, and knee injuries; and joint instability. Reference lists of included studies and relevant reviews were searched by hand. STUDY SELECTION: Selection criteria were peer-reviewed studies with a prospective design that used an objective scale to measure generalized joint hypermobility; the participants were engaged in sport activity, and the injury data were quantitative and based on diagnosis by a health professional, were self-reported, or resulted in time lost to athletic participation. The studies were screened by 1 researcher and checked by a second. Study methods were independently assessed by 2 investigators using the 6-point scale for prognostic studies developed by Pengel. Disagreements were resolved through discussion. Of 4841 studies identified, 18 met inclusion criteria. Of these, 8 were included in random-effects meta-analyses. DATA EXTRACTION: The data extracted by 2 reviewers included participant and sport characteristics and details of joint hypermobility and injury measurements. More detailed data for 4 investigations were obtained from the study authors. Where possible, hypermobility was defined as >\\/=4 of 9 points on the British Society of Rheumatology Scale (BSRS). MAIN RESULTS: Lower limb joint injuries (3 studies, 1047 participants) occurred in 14% of participants. Using the BSRS of joint hypermobility, any lower limb injury was not associated with hypermobility [odds ratio (OR), 1.43; 95% confidence interval (CI), 0.56-3.67]. Using the original authors\\' definitions, hypermobility was associated with risk of knee joint injuries (OR, 2.62; 95% CI, 1.04-6.58) in 5 studies. In 4 studies in which the BSRS could be used (1167 participants; incidence

Trainees' Perceived Knowledge Gain Unrelated to the Training Domain: The Joint Action of Impression Management and Motives

Science.gov (United States)

Chiaburu, Dan S.; Huang, Jason L.; Hutchins, Holly M.; Gardner, Richard G.

2014-01-01

Trainees' knowledge gains represent an important outcome in human resource development. In this research, we tested a model examining the joint influence of social desirability (impression management, self-deception) and motives (need for power, need for approval) on trainees' self-reported knowledge gain. We conducted a study with…

Respiratory pattern changes during costovertebral joint movement.

Science.gov (United States)

Shannon, R

1980-05-01

Experiments were conducted to determine if costovertebral joint manipulation (CVJM) could influence the respiratory pattern. Phrenic efferent activity (PA) was monitored in dogs that were anesthetized with Dial-urethane, vagotomized, paralyzed, and artificially ventilated. Ribs 6-10 (bilaterally) were cut and separated from ribs 5-11. Branches of thoracic nerves 5-11 were cut, leaving only the joint nerve supply intact. Manual joint movement in an inspiratory or expiratory direction had an inhibitory effect on PA. Sustained displacement of the ribs could inhibit PA for a duration equal to numerous respiratory cycles. CVJM in synchrony with PA resulted in an increased respiratory rate. The inspiratory inhibitory effect of joint receptor stimulation was elicited with manual chest compression in vagotomized spontaneously breathing dogs, but not with artificial lung inflation or deflation. It is concluded that the effect of CVJM on the respiratory pattern is due to stimulation of joint mechanoreceptors, and that they exert their influence in part via the medullary-pontine rhythm generator.

[An Investigation of the Role Responsibilities of Clinical Research Nurses in Conducting Clinical Trials].

Science.gov (United States)

Kao, Chi-Yin; Huang, Guey-Shiun; Dai, Yu-Tzu; Pai, Ya-Ying; Hu, Wen-Yu

2015-06-01

Clinical research nurses (CRNs) play an important role in improving the quality of clinical trials. In Taiwan, the increasing number of clinical trials has increased the number of practicing CRNs. Understanding the role responsibilities of CRNs is necessary to promote professionalism in this nursing category. This study investigates the role responsibilities of CRNs in conducting clinical trials / research. A questionnaire survey was conducted in a medical center in Taipei City, Taiwan. Eighty CRNs that were registered to facilitate and conduct clinical trials at this research site completed the survey. "Subject protection" was the CRN role responsibility most recognized by participants, followed by "research coordination and management", "subject clinical care", and "advanced professional nursing". Higher recognition scores were associated with higher importance scores and lower difficulty scores. Participants with trial training had significantly higher difficulty scores for "subject clinical care" and "research coordination and management" than their peers without this training (p research coordination and management" (p clinical practice.

Ergonomics in a national research and development programme for food technology

DEFF Research Database (Denmark)

Broberg, Ole; Hansen, Iben Posniak

1997-01-01

The research question for the study presented in this paper was: What are the opportunities and barriers for integrating ergonomics aspects into joint projects sponsored by the FOETEK programme? The objectives were (i) to evaluate the outcome of this clause of accounting for ergonomics impacts......, and (ii) to put forward recommendations for improving the integration of ergonomics into joint projects sponsored by the FOETEK programme. A survey based on a questionnaire was conducted among 57 joint projects. A total of 217 project managers or contact persons received the questionnaire. The response...

Cooperative Engineering as a Joint Action

Science.gov (United States)

Joffredo-Le Brun, Sophie; Morellato, Mireille; Sensevy, Gérard; Quilio, Serge

2018-01-01

This paper describes some elements of a specific kind of design-based research, cooperative engineering. In the first part of the paper, we argue that cooperative engineering can be analyzed through a joint action framework. We first present some conceptual tools that the Joint Action Theory in Didactics proposes in order to understand didactic…

Ethical considerations for conducting health disparities research in community health centers: a social-ecological perspective.

Science.gov (United States)

Boutin-Foster, Carla; Scott, Ebony; Melendez, Jennifer; Rodriguez, Anna; Ramos, Rosio; Kanna, Balavenkatesh; Michelen, Walid

2013-12-01

Community health centers (CHCs) provide optimal research settings. They serve a high-risk, medically underserved population in the greatest need of intervention. Low socioeconomic status renders this population particularly vulnerable to research misconduct. Traditional principles of research ethics are often applied to participants only. The social-ecological model offers a comprehensive framework for applying these principles across multiple levels (participants, providers, organizations, communities, and policy). Our experience with the Trial Using Motivational Interviewing, Positive Affect and Self-Affirmation in African-Americans with Hypertension, a randomized trial conducted in CHCs, led us to propose a new platform for discussing research ethics; examine the social, community, and political factors surrounding research conducted in CHCs; and recommend how future research should be conducted in such settings.

Designing and conducting survey research a comprehensive guide

CERN Document Server

Rea, Louis M

2014-01-01

The industry standard guide, updated with new ideas and SPSS analysis techniques Designing and Conducting Survey Research: A Comprehensive Guide Fourth Edition is the industry standard resource that covers all major components of the survey process, updated to include new data analysis techniques and SPSS procedures with sample data sets online. The book offers practical, actionable guidance on constructing the instrument, administrating the process, and analyzing and reporting the results, providing extensive examples and worksheets that demonstrate the appropriate use of survey and data tech

Discuss the value of T2 relaxation time in the research of femorotibial joint biological tissue

International Nuclear Information System (INIS)

Zhong Jinglian; Song Lingling; Liang Biling; Ye Ruixin; Yun Wenjuan

2009-01-01

Objective: To discuss the value of T 2 relaxation time in the research of the biomechanics and function of cartilage of knee joint. Methods: Knees of 20 healthy adults and 19 osteoarthritis patients were examined with sagittal 8-echo sequence. The T 2 value of cartilage was calculated. The T 2 values in the superficial and deeper cartilage of femoral and tibial joint were compared, so did between the osteoarthritis patients and healthy adults. Results: The T 2 values in the superficial and the deeper tibital cartilage were (48.8±6.3) ms, (44.3±5.7) ms, respectively. The T 2 values in the superficial and deeper femoral cartilage were (52.1±5.7) ms, (47.7±5.3) ms, respectively. There was a significant difference between superficial and deeper femoral cartilage (t=3.148 and t=3.384, P 2 value in the tibial cartilage of osteoarthritis patients was (56.0±9.1) ms and was higher than that of healthy adults. There was a significant difference between osteoarthritis patients and healthy adults (t=-3.446, P 2 relaxation time can be used in the research of the biomechanics and function of cartilage and has a application value in clinical diagnosis. (authors)

Solder joint technology materials, properties, and reliability

CERN Document Server

Tu, King-Ning

2007-01-01

Solder joints are ubiquitous in electronic consumer products. The European Union has a directive to ban the use of Pb-based solders in these products on July 1st, 2006. There is an urgent need for an increase in the research and development of Pb-free solders in electronic manufacturing. For example, spontaneous Sn whisker growth and electromigration induced failure in solder joints are serious issues. These reliability issues are quite complicated due to the combined effect of electrical, mechanical, chemical, and thermal forces on solder joints. To improve solder joint reliability, the science of solder joint behavior under various driving forces must be understood. In this book, the advanced materials reliability issues related to copper-tin reaction and electromigration in solder joints are emphasized and methods to prevent these reliability problems are discussed.

Overcoming practical challenges to conducting clinical research in the inpatient stroke rehabilitation setting.

Science.gov (United States)

Campbell, Grace B; Skidmore, Elizabeth R; Whyte, Ellen M; Matthews, Judith T

2015-10-01

There is a shortage of published empirical studies conducted in acute inpatient stroke rehabilitation, though such studies are greatly needed in order to shed light on the most efficacious inpatient stroke rehabilitation interventions. The inherent challenges of inpatient research may dissuade researchers from undertaking this important work. This paper describes our institution's experience devising practical solutions to research barriers in this setting. Through concentrated efforts to overcome research barriers, such as by cultivating collaborative relationships and capitalizing on unanticipated benefits, we successfully facilitated conduct of five simultaneous inpatient stroke studies. Tangible benefits realized include increased effectiveness of research participant identification and enrollment, novel collaborative projects, innovative clinical care initiatives, and enhanced emotional and practical support for patients and their families. We provide recommendations based on lessons learned during our experience, and discuss benefits of this collaboration for our research participants, clinical staff, and the research team.

Post-market clinical research conducted by medical device manufacturers: a cross-sectional survey

Directory of Open Access Journals (Sweden)

Ross JS

2015-05-01

Full Text Available Joseph S Ross, Katrina L Blount, Jessica D Ritchie, Beth Hodshon, Harlan M Krumholz Center for Outcomes Research and Evaluation, Yale-New Haven Hospital, New Haven, CT, USA Background: In the US, once a medical device is made available for use, several requirements have been established by the US Food and Drug Administration (FDA to ensure ongoing post-market surveillance of device safety and effectiveness. Our objective was to determine how commonly medical device manufacturers initiate post-market clinical studies or augment FDA post-market surveillance requirements for higher-risk devices that are most often approved via the FDA's pre-market approval (PMA pathway. Methods and results: We conducted a cross-sectional survey of 47 manufacturers with operations in California, Minnesota, and Massachusetts who market devices approved via the PMA pathway. Among 22 respondents (response rate =47%, nearly all self-reported conducting post-market clinical research studies, commonly between 1 and 5; only 1 respondent reported never conducting post-market clinical research studies. While manufacturers most often engaged in these studies to satisfy FDA requirements, other reasons were reported, including performance monitoring and surveillance and market acceptance initiatives. Risks of conducting and not conducting post-market clinical research studies were described through open-ended response to questions. Conclusion: Medical device manufacturers commonly initiate post-market clinical studies at the request of the FDA. Clinical data from these studies should be integrated into national post-market surveillance initiatives. Keywords: FDA, PMA pathway, post-market surveillance

Joint attention, social cognition and recognition memory in adults

Directory of Open Access Journals (Sweden)

Kwanguk eKim

2012-06-01

Full Text Available The early emerging capacity for Joint Attention, or socially coordinated visual attention, is thought to be integral to the development of social-cognition in childhood. Recent studies have also begun to suggest that joint attention affects adult cognition as well, but methodological limitations hamper research on this topic. To address this issue we developed a novel virtual reality (VR paradigm that integrates eye-tracking and virtual avatar technology to measure two types of joint attention in adults, Initiating Joint Attention (IJA and Responding to Joint Attention (RJA. Distinguishing these types of joint attention in research is important because they are thought to reflect unique, as well as common constellations of processes involved in human social-cognition and social learning. We tested the validity of the differentiation of IJA and RJA in our paradigm in two studies of picture recognition memory in undergraduate students. Study 1 indicated that young adults correctly identified more pictures they had previously viewed in an IJA condition (67% than in a RJA (58% condition, η2 = .57. Study 2 controlled for IJA and RJA stimulus viewing time differences, and replicated the findings of Study 1. The implications of these results for the validity of the paradigm and research on the affects of joint attention on adult social-cognition are discussed.

Research Involving Health Providers and Managers: Ethical Issues Faced by Researchers Conducting Diverse Health Policy and Systems Research in Kenya.

Science.gov (United States)

Molyneux, Sassy; Tsofa, Benjamin; Barasa, Edwine; Nyikuri, Mary Muyoka; Waweru, Evelyn Wanjiku; Goodman, Catherine; Gilson, Lucy

2016-12-01

There is a growing interest in the ethics of Health Policy and Systems Research (HPSR), and especially in areas that have particular ethical salience across HPSR. Hyder et al (2014) provide an initial framework to consider this, and call for more conceptual and empirical work. In this paper, we respond by examining the ethical issues that arose for researchers over the course of conducting three HPSR studies in Kenya in which health managers and providers were key participants. All three studies involved qualitative work including observations and individual and group interviews. Many of the ethical dilemmas researchers faced only emerged over the course of the fieldwork, or on completion, and were related to interactions and relationships between individuals operating at different levels or positions in health/research systems. The dilemmas reveal significant ethical challenges for these forms of HPSR, and show that potential 'solutions' to dilemmas often lead to new issues and complications. Our experiences support the value of research ethics frameworks, and suggest that these can be enriched by incorporating careful consideration of context embedded social relations into research planning and conduct. Many of these essential relational elements of ethical practice, and of producing quality data, are given stronger emphasis in social science research ethics than in epidemiological, clinical or biomedical research ethics, and are particularly relevant where health systems are understood as social and political constructs. We conclude with practical and research implications. © 2016 The Authors Developing World Bioethics Published by John Wiley & Sons Ltd.

Influence of Different Hip Joint Centre Locations on Hip and Knee Joint Kinetics and Kinematics During the Squat

Directory of Open Access Journals (Sweden)

Sinclair Jonathan

2014-12-01

Full Text Available Identification of the hip joint centre (HJC is important in the biomechanical examination of human movement. However, there is yet to be any published information regarding the influence of different HJC locations on hip and knee joint kinetics during functional tasks. This study aimed to examine the influence of four different HJC techniques on 3- D hip and knee joint kinetics/kinematics during the squat. Hip and knee joint kinetics/kinematics of the squat were obtained from fifteen male participants using an eight camera motion capture system. The 3-D kinetics/kinematics of the squat were quantified using four hip joint centre estimation techniques. Repeated measures ANOVAs were used to compare the discrete parameters as a function of each HJC location. The results show that significant differences in joint angles and moment parameters were evident at both the hip and knee joint in the coronal and transverse planes. These observations indicate that when calculating non-sagittal joint kinetics/kinematics during the squat, researchers should carefully consider their HJC method as it may significantly affect the interpretation of their data.

Overview and status of the Next European Dipole (NED) joint research activity

CERN Document Server

Devred, Arnaud; Baynham, D Elwyn; Boutboul, T; Canfer, S; Chorowski, M; Fabbricatore, P; Farinon, S; Félice, H; Fessia, P; Fydrych, J; Granata, V; Greco, Michela; Greenhalgh, J; Leroy, D; Loveridge, P W; Matkowski, M; Michalski, G; Michel, F; Oberli, L R; den Ouden, A; Pedrini, D; Pietrowicz, S; Polinski, J; Previtali, V; Quettier, L; Richter, D; Rifflet, J M; Rochford, J; Rondeaux, F; Sanz, S; Scheuerlein, C; Schwerg, N; Sgobba, Stefano; Sorbi, M; Toral-Fernandez, F; Van Weelderen, R; Védrine, P; Volpini, G

2006-01-01

The Next European Dipole (NED) Joint Research Activity was launched on 1st January 2004 to promote the development of high performance Nb$_{3}$Sn conductors in collaboration with European industry (aiming at a non-copper critical current density of 1500 A/mm2 at 4.2 K and 15 T) and to assess the suitability of Nb$_{3}$Sn technology to the next generation of accelerator magnets (aiming at an aperture of 88 mm and a conductor peak field of ~ 15 T). It is part of the Coordinated Accelerator Research in Europe (CARE) project, involves eight collaborators and is half-funded by the European Union. After briefly recalling the Activity organization, we report the main progress achieved over the last year, which includes: the manufacturing of a double-bath He II cryostat for heat transfer measurements through Nb$_{3}$Sn conductor insulation, detailed quench computations for various NED-like magnet configurations, the award of two industrial subcontracts for Nb$_{3}$Sn conductor development, the first results of a cros...

Joint research centre fusion materials irradiations in HFR: Present status and prospectives

International Nuclear Information System (INIS)

Casini, G.; Fenici, P.

1989-01-01

First a review is made of the Joint Research Centre experimental activity at HFR-Petten in the frame of the Fusion Technology and Safety Programme. The materials under investigation are: Cr-Ni Austenitic steels (316-L type) and Cr-Mn Austenitic steels (AMCR and FI type) as structural materials and Pb-17Li eutetic as tritium breeding material. The experiments on structural materials comprise: Sample irradiations with post-irradiation tensile tests (FRUST) Sample irradiations under constant load and post-irradiation strain measurement (TRIESTE) On-line creep tests (CRISP). The experiments on Pb-17Li breeder material regard sample irradiations to investigate tritium production and recovery as well as tritium permeation through blanket structures (LIBRETTO Experiment). Both irradiations on structural and breeding materials will be pursued up to the end of the current JRC-Multiannual Programme (1988-1991) and even further. In the last part of the paper expected developments of the testing programme at HFR are discussed. New areas of research should involve materials for divertor applications (NET/ITER) and advanced low activation composite materials for Commercial Power Reactors

Summary of Work for Joint Research Interchanges with DARWIN Integrated Product Team

Science.gov (United States)

Hesselink, Lambertus

1999-01-01

The intent of Stanford University's SciVis group is to develop technologies that enabled comparative analysis and visualization techniques for simulated and experimental flow fields. These techniques would then be made available un- der the Joint Research Interchange for potential injection into the DARWIN Workspace Environment (DWE). In the past, we have focused on techniques that exploited feature based comparisons such as shock and vortex extractions. Our current research effort focuses on finding a quantitative comparison of general vector fields based on topological features. Since the method relies on topological information, grid matching an@ vector alignment is not needed in the comparison. This is often a problem with many data comparison techniques. In addition, since only topology based information is stored and compared for each field, there is a significant compression of information that enables large databases to be quickly searched. This report will briefly (1) describe current technologies in the area of comparison techniques, (2) will describe the theory of our new method and finally (3) summarize a few of the results.

Application of Delphi expert panel in joint venture projects

Science.gov (United States)

Adnan, H.; Rosman, M. R.; Rashid, Z. Z. Ahmad; Mohamad Yusuwan, N.; Bakhary, N. A.

2018-02-01

This study was conducted with the aim to identify the application of the Delphi Technique in validating findings obtained from questionnaire surveys and interviews done in- depth on the subject of joint venture projects in Malaysia. The Delphi technique aims to achieve a consensus of opinion amongst expert panellist that were selected on the primary factors in JV projects. To achieve research objectives, a progressive series of questions was designed where a selected panel of expert to confirm and validate the final findings. The rationale, benefits, limitations and recommendations for the use of Delphi were given in this study. From the literature review done, twenty-one factors were identified as critical factors to the making any joint venture project successful. Detail information from contractors were obtained by using the questionnaire survey method and forty-three in-depth interviews were carried out. Trust between partners, mutual understanding, partner selection criteria, agreement of contract, objective compatibility, conflict, and commitment were confirmed by the Delphi panel to be the critical success factors besides another fourteen factors which were found to be the Failure Reduction Criteria. Delphi techniques has proven to successfully assist in recognising the main factors and would be beneficial in supplementing the success of joint venture arrangements application for construction projects in Malaysia.

Educational Research: Planning, Conducting, and Evaluating Quantitative and Qualitative Research, Enhanced Pearson eText with Loose-Leaf Version--Access Card Package. Fifth Edition

Science.gov (United States)

Creswell, John W.

2015-01-01

"Educational Research: Planning, Conducting, and Evaluating Quantitative and Qualitative Research" offers a truly balanced, inclusive, and integrated overview of the processes involved in educational research. This text first examines the general steps in the research process and then details the procedures for conducting specific types…

30 CFR 280.21 - What must I do in conducting G&G prospecting or scientific research?

Science.gov (United States)

2010-07-01

... scientific research? 280.21 Section 280.21 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE... prospecting or scientific research? While conducting G&G prospecting or scientific research activities under a... you are prospecting or conducting scientific research activities. (b) Consult and coordinate your G&G...

How can we assess the burden of muscle, bone and joint conditions in rural Botswana

DEFF Research Database (Denmark)

Hondras, Maria; Myburgh, Corrie; Hartvigsen, Jan

2015-01-01

, organisational and clinical characteristics for the burden of living with and caring for people living with musculoskeletal conditions in rural Botswana. In this paper, we describe the community context, theoretical framework, and research methods to address the project aim with a qualitative study. METHODS......-participant and participant observations, and informal and in-depth interviews with villagers and healthcare providers. Villager interviews were typically conducted in Setswana with an interpreter. Audio recordings were transcribed verbatim in the language spoken with Setswana contextually translated into English. Computer......- and middle-income countries in Africa. Since 2011, World Spine Care, a nongovernmental organisation, has collaborated with the Botswana Ministry of Health to open spine care centres and to conduct research. The broad aim of the Muscle, Bone and Joint (MuBoJo) research project is to examine the sociocultural...

Research on elaboration of the evaluation guidelines for activities implemented jointly; Kyodo jisshi katsudo hyoka guide line sakutei chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

Elaboration of the evaluation guidelines for activities implemented jointly (AIJ) was researched to prevent the earth from warming. AIJ is the means to globally promote countermeasures against global warming cost-effectively by optimally combining every country`s technology, know-how and fund. AIJ was established in the 1st Conference of the Parties (COPI) of the United Nations Framework Convention on Climate Change in March, 1995. The pilot phase of AIJ is first carried out by voluntary workers jointly with developing countries under the agreement of the parties. The current situation of activities is reported in COPI as materials for evaluation of AIJ. To promote AIJ, elaboration of the evaluation guidelines for AIJ Japan program is also necessary for Japan. This research arranged the contents of the evaluation guidelines and the method of classifying projects for AIJ Japan program, and carried out some case studies of promising projects to reduce greenhouse gas emission for future proposal. 3 figs., 31 tabs.

Conducting research in a resource-constrained environment: avoiding the pitfalls

Directory of Open Access Journals (Sweden)

Janine I. Munsamy

2014-03-01

Full Text Available Practical challenges affected the conducting of a retrospective drug use evaluation (DUE on the rational use of tenofovir in a resourceconstrained South African Antiretroviral Treatment Programme. The primary outcome measure was the percentage of patient records compliant with DUE criteria using initiation prescriptions from March 2009 to February 2010. Health system challenges encountered included stringent institutional administrative procedures, lack of efficient communication channels, reliance on overburdened personnel and fear of audit. Forty percent (222 of 556 of patient records identified for inclusion in the study had to be excluded, mainly due to poor record keeping. Research budgetary constraints also limited data collection. This experience highlighted real, unforeseen challenges when conducting a retrospective study in a resource-constrained environment. A sound understanding of the environment and adequate preparation is recommended. The lessons learnt may prove valuable to both firsttime and experienced researchers in a resource-limited setting using a similar methodology.

Research and Education Program for Underrepresented Minority Engineering Students in the JIAFS

Science.gov (United States)

Whitesides, John L.

2000-01-01

This paper is a final report on Research and Education Program for Underrepresented Minority Engineering Students in the JIAFS (Joint Institute for Advancement of Flight Sciences). The objectives of the program were to conduct research at the NASA Langley Research Center and to increase the number of underrepresented minorities in aerospace engineering.

Designing and Managing Successful International Joint Development Programs

Science.gov (United States)

2016-04-30

joint development programs are important because of their potential to reduce costs and increase partnership benefits such as interoperability, economies ...have actualized by discussing what characteristics research has shown as crucial to international joint development program outcomes. The study team... characteristics of international joint development programs that result in positive or negative cost, scheduling, and end-product outcomes, such as a final

JAERI-KEK joint project on high intensity proton accelerators

International Nuclear Information System (INIS)

Nagamiya, Shoji

2000-01-01

Japan Atomic Energy Research Institute (JAERI) and the High Energy Accelerator Organization (KEK) are promoting the joint project integrating both the Neutron Science Project (NSP) of JAERI and the Japan Hadron Facility Project (JHF) of KEK for comprehensive studies on basic science and technology using high-intensity proton accelerator. This paper describes the joint project prepared by the Joint Project Team of JAERI and KEK to construct accelerators and research facilities necessary both for the NSP and the JHF at the site of JAERI Tokai Establishment. (author)

Synchronised and complementary coordination mechanisms in an asymmetric joint aiming task

DEFF Research Database (Denmark)

Skewes, Joshua Charles; Skewes, Lea; Michael, John

2015-01-01

Many forms of social interaction require that behaviour be coordinated in the here and now. Much research has been conducted on how people coordinate their actions in real time to achieve a joint goal, showing that people use both synchronised (i.e. symmetric) and complementary (i.e. asymmetric) ...... in this asymmetric task, as people synchronise better with an irregular, but adaptive partner, than with a completely predictable, but non-responsive metronome. These results show that given asymmetric task constraints, adaptability, rather than predictability facilitates coordination....

Post-market clinical research conducted by medical device manufacturers: a cross-sectional survey.

Science.gov (United States)

Ross, Joseph S; Blount, Katrina L; Ritchie, Jessica D; Hodshon, Beth; Krumholz, Harlan M

2015-01-01

In the US, once a medical device is made available for use, several requirements have been established by the US Food and Drug Administration (FDA) to ensure ongoing post-market surveillance of device safety and effectiveness. Our objective was to determine how commonly medical device manufacturers initiate post-market clinical studies or augment FDA post-market surveillance requirements for higher-risk devices that are most often approved via the FDA's pre-market approval (PMA) pathway. We conducted a cross-sectional survey of 47 manufacturers with operations in California, Minnesota, and Massachusetts who market devices approved via the PMA pathway. Among 22 respondents (response rate =47%), nearly all self-reported conducting post-market clinical research studies, commonly between 1 and 5; only 1 respondent reported never conducting post-market clinical research studies. While manufacturers most often engaged in these studies to satisfy FDA requirements, other reasons were reported, including performance monitoring and surveillance and market acceptance initiatives. Risks of conducting and not conducting post-market clinical research studies were described through open-ended response to questions. Medical device manufacturers commonly initiate post-market clinical studies at the request of the FDA. Clinical data from these studies should be integrated into national post-market surveillance initiatives.

Achievement reports on joint research of solar energy power generation field test project in fiscal 1997. Part 1 of 3; 1997 nendo taiyoko hatsuden field test jigyo kyodo kenkyu seika hokokusho 1/3

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-08-01

This report is a collection of 101 achievement reports on joint research of solar energy power generation field test project. The contents of the achievement reports are the results and generalization of the joint research with respect to the solar energy power generation field test project. As regards the locations of executing the joint research, the locations by areas and applications are stated. By areas, the joint research was carried out on gymnasiums, parks, recreation centers in the standard areas, universities, sports facilities, public halls, agricultural associations, aged persons' homes, primary, middle and high schools, prefectural office buildings and industrial technology centers in cold districts; prefectural office buildings, agricultural associations, universities, museums, industrial technology centers in good insolation districts; museums, primary, middle and high schools, parks in strong wind and salt polluted districts; and universities and police stations in snowy districts. By applications, the joint research was performed on life cooperative halls, factories, nursery schools, hospitals, clinics, local newspaper companies, indoor warm-water swimming pools, and mushroom fields. (NEDO)

Achievement reports on joint research of solar energy power generation field test project in fiscal 1997. Part 1 of 3; 1997 nendo taiyoko hatsuden field test jigyo kyodo kenkyu seika hokokusho 1/3

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-08-01

This report is a collection of 101 achievement reports on joint research of solar energy power generation field test project. The contents of the achievement reports are the results and generalization of the joint research with respect to the solar energy power generation field test project. As regards the locations of executing the joint research, the locations by areas and applications are stated. By areas, the joint research was carried out on gymnasiums, parks, recreation centers in the standard areas, universities, sports facilities, public halls, agricultural associations, aged persons' homes, primary, middle and high schools, prefectural office buildings and industrial technology centers in cold districts; prefectural office buildings, agricultural associations, universities, museums, industrial technology centers in good insolation districts; museums, primary, middle and high schools, parks in strong wind and salt polluted districts; and universities and police stations in snowy districts. By applications, the joint research was performed on life cooperative halls, factories, nursery schools, hospitals, clinics, local newspaper companies, indoor warm-water swimming pools, and mushroom fields. (NEDO)

Local Skills Case Study. Research Report

Science.gov (United States)

Green, Anne; Hogarth, Terence; Thom, Graham; MacLeod, Katie; Warhurst, Chris; Willis, Robert; Mackay, Susan

2017-01-01

This study, jointly conducted by the University of Warwick Institute for Employment Research (IER) and SQW Ltd., discusses the UK Government's intention to accelerate the process of ceding more responsibility for delivering a range of services to the local level. The logic is that local actors are better placed to identify local priorities. This…

Experimental and Computational Modal Analyses for Launch Vehicle Models considering Liquid Propellant and Flange Joints

Directory of Open Access Journals (Sweden)

Chang-Hoon Sim

2018-01-01

Full Text Available In this research, modal tests and analyses are performed for a simplified and scaled first-stage model of a space launch vehicle using liquid propellant. This study aims to establish finite element modeling techniques for computational modal analyses by considering the liquid propellant and flange joints of launch vehicles. The modal tests measure the natural frequencies and mode shapes in the first and second lateral bending modes. As the liquid filling ratio increases, the measured frequencies decrease. In addition, as the number of flange joints increases, the measured natural frequencies increase. Computational modal analyses using the finite element method are conducted. The liquid is modeled by the virtual mass method, and the flange joints are modeled using one-dimensional spring elements along with the node-to-node connection. Comparison of the modal test results and predicted natural frequencies shows good or moderate agreement. The correlation between the modal tests and analyses establishes finite element modeling techniques for modeling the liquid propellant and flange joints of space launch vehicles.

Joint Center for Satellite Data Assimilation Overview and Research Activities

Science.gov (United States)

Auligne, T.

2017-12-01

In 2001 NOAA/NESDIS, NOAA/NWS, NOAA/OAR, and NASA, subsequently joined by the US Navy and Air Force, came together to form the Joint Center for Satellite Data Assimilation (JCSDA) for the common purpose of accelerating the use of satellite data in environmental numerical prediction modeling by developing, using, and anticipating advances in numerical modeling, satellite-based remote sensing, and data assimilation methods. The primary focus was to bring these advances together to improve operational numerical model-based forecasting, under the premise that these partners have common technical and logistical challenges assimilating satellite observations into their modeling enterprises that could be better addressed through cooperative action and/or common solutions. Over the last 15 years, the JCSDA has made and continues to make major contributions to operational assimilation of satellite data. The JCSDA is a multi-agency U.S. government-owned-and-operated organization that was conceived as a venue for the several agencies NOAA, NASA, USAF and USN to collaborate on advancing the development and operational use of satellite observations into numerical model-based environmental analysis and forecasting. The primary mission of the JCSDA is to "accelerate and improve the quantitative use of research and operational satellite data in weather, ocean, climate and environmental analysis and prediction systems." This mission is fulfilled through directed research targeting the following key science objectives: Improved radiative transfer modeling; new instrument assimilation; assimilation of humidity, clouds, and precipitation observations; assimilation of land surface observations; assimilation of ocean surface observations; atmospheric composition; and chemistry and aerosols. The goal of this presentation is to briefly introduce the JCSDA's mission and vision, and to describe recent research activities across various JCSDA partners.

Critical Joints in Large Composite Primary Aircraft Structures. Volume 3: Ancillary Test Results

Science.gov (United States)

Bunin, Bruce L.; Sagui, R. L.

1985-01-01

A program was conducted to develop the technology for critical structural joints for composite wing structure that meets all the design requirements of a 1990 commercial transport aircraft. The results of a comprehensive ancillary test program are summarized, consisting of single-bolt composite joint specimens tested in a variety of configurations. These tests were conducted to characterize the strength and load deflection properties that are required for multirow joint analysis. The composite material was Toray 300 fiber and Ciba-Geigy 914 resin, in the form of 0.005 and 0.01 inch thick unidirectional tape. Tests were conducted in single and double shear for loaded and unloaded hole configurations under both tensile and compressive loading. Two different layup patterns were examined. All tests were conducted at room temperature. In addition, the results of NASA Standard Toughness Test (NASA RP 1092) are reported, which were conducted for several material systems.

The Ageing Effect of Mechanical Joints on the Tyre/Joint Noises Monitored by a Control Vehicle Method without Traffic Disturbance

Directory of Open Access Journals (Sweden)

C. K. Wong

2013-01-01

Full Text Available This paper studies the ageing effect of mechanical joints reflecting from the tyre/joint impacting noise by measuring the vehicle structure-borne noise change. Field data is collected applying two measurement methods suitable for newly installed and existing old expansion joints. The measurement methodology is improved by designing and applying a trailer for equipment installation. The main advantage of this method is not to disturb existing traffic by lane closure for measurement. Field measurements were conducted regularly for a study period up to 16 months after new joint replacement to monitor the variation of the structure-borne noise change inside a test vehicle while passing through mechanical joints. Empirical relationship is developed based on the field data of the roadside airborne noise change and the vehicle structure-borne noise change. The roadside tyre/joint noises could be converted using calibrated empirical formula. Key result findings include the following. (1 The vehicle structure-borne noise change is found smallest during the 3rd–6th months even lower than that measured when a new joint is installed. The structure-borne noise change then keeps increasing afterwards till the end of the study period. (2 Similar observations are found in all study cases incorporating various mechanical joint types and test vehicle types.

Acute Ankle Sprain in a Mouse Model: Changes in Knee-Joint Space.

Science.gov (United States)

Hubbard-Turner, Tricia; Wikstrom, Erik A; Guderian, Sophie; Turner, Michael J

2017-06-02

  Ankle sprains remain the most common orthopaedic injury. Conducting long-term studies in humans is difficult and costly, so the long-term consequences of an ankle sprain are not entirely known.   To measure knee-joint space after a single surgically induced ankle sprain in mice.   Randomized controlled trial.   University research laboratory.   Thirty male mice (CBA/2J) were randomly placed into 1 of 3 surgical groups: the transected calcaneofibular ligament (CFL) group, the transected anterior talofibular ligament/CFL group, or a sham treatment group. The right ankle was operated on in all mice.   Three days after surgery, all of the mice were individually housed in cages containing a solid-surface running wheel, and daily running-wheel measurements were recorded. Before surgery and every 6 weeks after surgery, a diagnostic ultrasound was used to measure medial and lateral knee-joint space in both hind limbs.   Right medial (P = .003), right lateral (P = .002), left medial (P = .03), and left lateral (P = .002) knee-joint spaces decreased across the life span. The mice in the anterior talofibular ligament/CFL group had decreased right medial (P = .004) joint space compared with the sham and CFL groups starting at 24 weeks of age and continuing throughout the life span. No differences occurred in contralateral knee-joint degeneration among any of the groups.   Based on current data, mice that sustained a surgically induced severe ankle sprain developed greater joint degeneration in the ipsilateral knee. Knee degeneration could result from accommodation to the laxity of the ankle or biomechanical alterations secondary to ankle instability. A single surgically induced ankle sprain could significantly affect knee-joint function.

Hip joint mobility in dancers: preliminary report.

Science.gov (United States)

Drężewska, Marlena; Gałuszka, Renata; Sliwiński, Zbigniew

2012-01-01

The aim of this study was to evaluate the impact of dancing on hip joint mobility and to assess the relationship between active movements of the hips and injuries among dancers, which may be important in planning rehabilitation in this group. The sample comprised 49 dancers (37 women and 12 men) aged 15 to 32 years. The participants were the professional dancers of the Kielce Dance Theatre and members of two youth jazz dance teams from the Kielce Dance Theatre. The active range of motion of the hips was measured in three planes using a goniometer in order to assess the influence of dance training on hip joint mobility. A questionnaire-based survey was also conducted. The range of flexion, extension and external rotation was significantly greater in the group of long-time dancers (p <0.05). There was a significantly greater range of flexion, abduction and external rotation in previously injured hip joints (p<0.05). 1. Injuries to hip joints in dancers may result in increased ranges of motion, which may lead to disturbances of joint stability. 2. Being a long-time dancer and the female gender were associated with an increased range of hip joint motion.

Creating a Three-Parent Child: An Educational Paradigm for the Responsible Conduct of Research

Directory of Open Access Journals (Sweden)

Ruth L. Fischbach

2014-10-01

Full Text Available The field of assisted reproduction is renowned for its remarkable advances and constant pushing forward of research boundaries in an effort to offer innovative and effective methods for enhancing fertility. Accompanying these advances, however, are physiological, psychological, and bioethical consequences that must be considered. These concomitant advances and consequences make assisted reproduction an excellent educational paradigm for inculcating responsible conduct in both research and clinical practice. Ultimately, responsible conduct rests on the ethical researcher and clinician. Here, we present the as-yet unapproved, contentious assisted reproductive technology of mitochondrial replacement transfer (MRT as an ideal educational platform to foster the responsible conduct of research by advancing dialogue among multidisciplinary scholars, researchers, and students. Using a likely future case, we present the basic science, legal, and ethical considerations, and the pedagogical principles and strategies for using MRT as an effective educational paradigm. Society will benefit when the ethical issues inherent in creating children with three genetic parents as well as germline interference are discussed across multiple academic levels that include researchers, legal experts, bioethicists, and government-appointed commissions. Furthermore, undergraduate and graduate students should be included because they will likely determine the ethical fates of these biotechnologies. While emerging assisted reproduction technologies such as MRT are highly complex and will take years to be readily available for patients in need, now is the time to consider their scientific, legal, ethical, and cultural/religious implications for ensuring the responsible conduct of research.

Tribology and total hip joint replacement: current concepts in mechanical simulation.

Science.gov (United States)

Affatato, S; Spinelli, M; Zavalloni, M; Mazzega-Fabbro, C; Viceconti, M

2008-12-01

Interest in the rheology and effects of interacting surfaces is as ancient as man. This subject can be represented by a recently coined word: tribology. This term is derived from the Greek word "tribos" and means the "science of rubbing". Friction, lubrication, and wear mechanism in the common English language means the precise field of interest of tribology. Wear of total hip prosthesis is a significant clinical problem that involves, nowadays, a too high a number of patients. In order to acquire further knowledge on the tribological phenomena that involve hip prosthesis wear tests are conducted on employed materials to extend lifetime of orthopaedic implants. The most basic type of test device is the material wear machine, however, a more advanced one may more accurately reproduce some of the in vivo conditions. Typically, these apparatus are called simulators, and, while there is no absolute definition of a joint simulator, its description as a mechanical rig used to test a joint replacement, under conditions approximating those occurring in the human body, is acceptable. Simulator tests, moreover, can be used to conduct accelerated protocols that replicate/simulate particularly extreme conditions, thus establishing the limits of performance for the material. Simulators vary in their level of sophistication and the international literature reveals many interpretations of the design of machines used for joint replacement testing. This paper aims to review the current state of the art of the hip joint simulators worldwide. This is specified through a schematic overview by describing, in particular, constructive solutions adopted to reproduce in vivo conditions. An exhaustive commentary on the evolution and actually existing simulation standards is proposed by the authors. The need of a shared protocol among research laboratories all over the world could lead to a consensus conference.

Body position reproducibility and joint alignment stability criticality on a muscular strength research device

Science.gov (United States)

Nunez, F.; Romero, A.; Clua, J.; Mas, J.; Tomas, A.; Catalan, A.; Castellsaguer, J.

2005-08-01

MARES (Muscle Atrophy Research and Exercise System) is a computerized ergometer for neuromuscular research to be flown and installed onboard the International Space Station in 2007. Validity of data acquired depends on controlling and reducing all significant error sources. One of them is the misalignment of the joint rotation axis with respect to the motor axis.The error induced on the measurements is proportional to the misalignment between both axis. Therefore, the restraint system's performance is critical [1]. MARES HRS (Human Restraint System) assures alignment within an acceptable range while performing the exercise (results: elbow movement:13.94mm+/-5.45, Knee movement: 22.36mm+/- 6.06 ) and reproducibility of human positioning (results: elbow movement: 2.82mm+/-1.56, Knee movement 7.45mm+/-4.8 ). These results allow limiting measurement errors induced by misalignment.

An analysis of a joint shear model for jointed media with orthogonal joint sets

International Nuclear Information System (INIS)

Koteras, J.R.

1991-10-01

This report describes a joint shear model used in conjunction with a computational model for jointed media with orthogonal joint sets. The joint shear model allows nonlinear behavior for both joint sets. Because nonlinear behavior is allowed for both joint sets, a great many cases must be considered to fully describe the joint shear behavior of the jointed medium. An extensive set of equations is required to describe the joint shear stress and slip displacements that can occur for all the various cases. This report examines possible methods for simplifying this set of equations so that the model can be implemented efficiently form a computational standpoint. The shear model must be examined carefully to obtain a computationally efficient implementation that does not lead to numerical problems. The application to fractures in rock is discussed. 5 refs., 4 figs

Gait analysis and weight bearing in pre-clinical joint pain research.

Science.gov (United States)

Ängeby Möller, Kristina; Svärd, Heta; Suominen, Anni; Immonen, Jarmo; Holappa, Johanna; Stenfors, Carina

2018-04-15

There is a need for better joint pain treatment, but development of new medication has not been successful. Pre-clinical models with readouts that better reflect the clinical situation are needed. In patients with joint pain, pain at rest and pain at walking are two major complaints. We describe a new way of calculating results from gait analysis using the CatWalk™ setup. Rats with monoarthritis induced by injection of Complete Freund's Adjuvant (CFA) intra-articularly into the ankle joint of one hind limb were used to assess gait and dynamic weight bearing. The results show that dynamic weight bearing was markedly reduced for the injected paw. Gait parameters such as amount of normal step sequences, walking speed and duration of step placement were also affected. Treatment with naproxen (an NSAID commonly used for inflammatory pain) attenuated the CFA-induced effects. Pregabalin, which is used for neuropathic pain, had no effect. Reduced dynamic weight bearing during locomotion, assessed and calculated in the way we present here, showed a dose-dependent and lasting normalization after naproxen treatment. In contrast, static weight bearing while standing (Incapacitance tester) showed a significant effect for a limited time only. Mechanical sensitivity (von Frey Optihairs) was completely normalized by naproxen, and the window for testing pharmacological effect disappeared. Objective and reproducible effects, with an endpoint showing face validity compared to pain while walking in patients with joint pain, are achieved by a new way of calculating dynamic weight bearing in monoarthritic rats. Copyright © 2017 Elsevier B.V. All rights reserved.

[Advances on biomechanics and kinematics of sprain of ankle joint].

Science.gov (United States)

Zhao, Yong; Wang, Gang

2015-04-01

Ankle sprains are orthopedic clinical common disease, accounting for joint ligament sprain of the first place. If treatment is not timely or appropriate, the joint pain and instability maybe develop, and even bone arthritis maybe develop. The mechanism of injury of ankle joint, anatomical basis has been fully study at present, and the diagnostic problem is very clear. Along with the development of science and technology, biological modeling and three-dimensional finite element, three-dimensional motion capture system,digital technology study, electromyographic signal study were used for the basic research of sprain of ankle. Biomechanical and kinematic study of ankle sprain has received adequate attention, combined with the mechanism research of ankle sprain,and to explore the the biomechanics and kinematics research progress of the sprain of ankle joint.

Conducting wine marketing research with impact in China: Guidelines for design, execution and dissemination

OpenAIRE

Justin Cohen; Larry Lockshin

2017-01-01

China is the fastest growing wine market, but conducting research there is fraught with a variety of issues. This article explores some of the issues the authors have dealt with in conducting wine marketing research in China over the last five years. We discuss issues with the design of research to focus on important issues for both academics and the industry. We relate the key problems in gaining proper translation and useful sampling procedures. Finally, we provide some guidelines for commu...

Review: Environmental influences on alcohol use: Informing research on the joint effects of genes and the environment in diverse U.S. populations.

Science.gov (United States)

Chartier, Karen G; Karriker-Jaffe, Katherine J; Cummings, Cory R; Kendler, Kenneth S

2017-08-01

This review aimed to inform the current state of alcohol research on the joint effects of genes and the environment conducted in U.S. racial/ethnic minority populations, focusing on African Americans, Latinos/Hispanics, Asians, and American Indians. A key-word and author-based search was conducted and supplemented with direct contact to researchers in this area to ensure a comprehensive inclusion of published, peer-reviewed studies. These studies were considered in terms of the racial/ethnic population groups, phenotypes, genetic variants, and environmental influences covered. Research findings from alcohol epidemiologic studies were highlighted to introduce some potential environmental variables for future studies of gene and environment (G-E) relationships. Twenty-six (N = 26) studies were reviewed. They predominantly involved African American and Asian samples and had a very limited focus on Latinos/Hispanics and American Indians. There was a wide range of alcohol-related phenotypes examined, and studies almost exclusively used a candidate gene approach. Environmental influences focused on the most proximate social network relationships with family and peers. There was far less examination of community- and societal-level environmental influences on drinking. Epidemiologic studies informing the selection of potential environmental factors at these higher order levels suggest inclusion of indicators of drinking norms, alcohol availability, socioeconomic disadvantage, and unfair treatment. The review of current literature identified a critical gap in the study of environments: There is the need to study exposures at community and societal levels. These initial studies provide an important foundation for evolving the dialogue and generating other investigations of G-E relationships in diverse racial/ethnic groups. (Am J Addict 2017;26:446-460). © 2017 American Academy of Addiction Psychiatry.

A scoping review of reporting 'Ethical Research Practices' in research conducted among refugees and war-affected populations in the Arab world.

Science.gov (United States)

Makhoul, Jihad; Chehab, Rana F; Shaito, Zahraa; Sibai, Abla M

2018-05-15

Ethical research conduct is a cornerstone of research practice particularly when research participants include vulnerable populations. This study mapped the extent of reporting ethical research practices in studies conducted among refugees and war-affected populations in the Arab World, and assessed variations by time, country of study, and study characteristics. An electronic search of eight databases resulted in 5668 unique records published between 2000 and 2013. Scoping review yielded 164 eligible articles for analyses. Ethical research practices, including obtaining institutional approval, access to the community/research site, and informed consent/assent from the research participants, were reported in 48.2, 54.9, and 53.7% of the publications, respectively. Institutional approval was significantly more likely to be reported when the research was biomedical in nature compared to public health and social (91.7% vs. 54.4 and 32.4%), when the study employed quantitative compared to qualitative or mixed methodologies (61.7% vs. 26.8 and 42.9%), and when the journal required a statement on ethical declarations (57.4% vs. 27.1%). Institutional approval was least likely to be reported in papers that were sole-authored (9.5%), when these did not mention a funding source (29.6%), or when published in national journals (0%). Similar results were obtained for access to the community site and for seeking informed consent/assent from study participants. The responsibility of inadequacies in adherence to ethical research conduct in crisis settings is born by a multitude of stakeholders including funding agencies, institutional research boards, researchers and international relief organizations involved in research, as well as journal editors, all of whom need to play a more proactive role for enhancing the practice of ethical research conduct in conflict settings.

Three-dimensional kinematics of the knee and ankle joints for three consecutive push-offs during ice hockey skating starts.

Science.gov (United States)

Lafontaine, Dany

2007-09-01

Little biomechanical research has been conducted recently on hockey skating despite the sport's worldwide appeal. One reason for this lack of biomechanical knowledge stems from the difficulty of collecting data. The lack of accuracy, the disputable realism of treadmills, and the large field of view required are some of the technical challenges that have to be overcome. The main objective of the current study was to improve our knowledge of the joint kinematics during the skating stroke. A second objective was to improve the data collection system we developed and the third was to establish if a kinematic progression exists in the hockey skating stroke similar to that in speed skating. Relative motions at the knee and ankle joints were computed using a joint coordinate system approach. The differences at the knee joints in push-offs indicated that the skating skill was progressively changing with each push-off. The relative stability of the ankle angles can be attributed to the design of the skate boots, which have recently become very rigid. Further research on ice hockey skating is warranted and should include more skaters and investigate the effect various starting strategies and variations in equipment have on skaters' performance.

Prison health service directors' views on research priorities and organizational issues in conducting research in prison: outcomes of a national deliberative roundtable.

Science.gov (United States)

Simpson, Paul Leslie; Guthrie, Jill; Butler, Tony

2017-06-12

Purpose Given that prisoners have significant health needs across most areas, the paucity of prisoner health research, and the difficulties involved in the conduct of research in this setting, there is a need to develop research priorities that align with key stakeholder groups. One such group are those responsible for health service provision in prisons - prison health service directors. The paper aims to discuss these issues. Design/methodology/approach Prison health service directors in each Australian state and territory were invited to participate in a national (deliberative) roundtable where the consensus building nominal group technique was utilized. This involved the identification of research priorities and organizational issues in conducting research with prisoners, and ranking research priorities. A thematic analysis was conducted on organizational issues. Findings In total, 13 participants attended the roundtable. Participants identified 28 research priorities and 12 organizational issues. Top ranked research priorities were mental health, cognitive and intellectual disability, post-release health maintenance, ageing prisoners, chronic health conditions and Aboriginal and Torres Strait Islander health. Themes identified from the organizational issues included prisoner access to research participation, health and research literacy of custodial staff, and institutional protectionism in response to research that may discover negative information about the custodial setting. Research limitations/implications These findings should inform future efforts to improve research infrastructures to undertake research to improve the health of people in Australian prisons, and help to align researchers' efforts with those of a key organizational stakeholder. Originality/value This is the first paper to determine the research priorities and organizational issues in conducting research in prisons of prison health service directors.

Embedding responsible conduct in learning and research into an Australian undergraduate curriculum.

Science.gov (United States)

Fernandes, Lynette B

2017-01-02

Responsible conduct in learning and research (RCLR) was progressively introduced into the pharmacology curriculum for undergraduate science students at The University of Western Australia. In the second year of this undergraduate curriculum, a lecture introduces students to issues such as the use of animals in teaching and responsible conduct of research. Third year student groups deliver presentations on topics including scientific integrity and the use of human subjects in research. Academic and research staff attending these presentations provide feedback and participate in discussions. Students enrolled in an optional capstone Honours year complete an online course on the responsible conduct of research and participate in an interactive movie. Once RCLR became established in the curriculum, a survey of Likert-scaled and open-ended questions examined student and staff perceptions. Data were expressed as Approval (% of responses represented by Strongly Agree and Agree). RCLR was found to be relevant to the study of pharmacology (69-100% Approval), important for one's future career (62-100% Approval), and stimulated further interest in this area (32-75% Approval). Free entry comments demonstrated the value of RCLR and constructive suggestions for improvement have now been incorporated. RCLR modules were found to be a valuable addition to the pharmacology undergraduate curriculum. This approach may be used to incorporate ethics into any science undergraduate curriculum, with the use of discipline-specific topics. © 2016 by The International Union of Biochemistry and Molecular Biology, 45(1):53-59, 2017. © 2016 The International Union of Biochemistry and Molecular Biology.

FY 2000 report on the project on the researcher dispatch type international joint research survey. Survey of the internationalization of research on the effective utilization technology for energy resources; 2000 nendo kenkyusha hakengata kokusai kyodo kenkyu chosa jigyo hokokusho. Energy shigen yukoriyo gijutsu kenkyu kokusaika chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

As to themes of the research survey which contribute to upgrading/diversification of the effective utilization of energy resources and are important in increasing cooperative relations with overseas countries, survey research was conducted by dispatching investigators. Relating to long-life Si solar cells, research survey was made on the reduction in deterioration of solar cell. Concerning the hydrogen carbonless energy system, the economical efficiency of a natural energy/hydrogen combined system was studied for all areas of Aomori prefecture. About the development of the multiple chamber type artificial pancreas for patients with serious diabetes, study using model dogs was investigated. As to the processing of PVC waste, the mechano-chemical method was discussed in the U.S. The paper further surveyed the following: PDE application to the aerospace field, joint developmental study of the reuse type space transport system by Japan and Russia, treatment/recycling of the electric/electronic equipment waste including toxic substances, technology of the manufacture of nano-particles and evaluation of optical characteristics of nano-structures, etc. (NEDO)

Brief report: reconstruction of joint hyaline cartilage by autologous progenitor cells derived from ear elastic cartilage.

Science.gov (United States)

Mizuno, Mitsuru; Kobayashi, Shinji; Takebe, Takanori; Kan, Hiroomi; Yabuki, Yuichiro; Matsuzaki, Takahisa; Yoshikawa, Hiroshi Y; Nakabayashi, Seiichiro; Ik, Lee Jeong; Maegawa, Jiro; Taniguchi, Hideki

2014-03-01

In healthy joints, hyaline cartilage covering the joint surfaces of bones provides cushioning due to its unique mechanical properties. However, because of its limited regenerative capacity, age- and sports-related injuries to this tissue may lead to degenerative arthropathies, prompting researchers to investigate a variety of cell sources. We recently succeeded in isolating human cartilage progenitor cells from ear elastic cartilage. Human cartilage progenitor cells have high chondrogenic and proliferative potential to form elastic cartilage with long-term tissue maintenance. However, it is unknown whether ear-derived cartilage progenitor cells can be used to reconstruct hyaline cartilage, which has different mechanical and histological properties from elastic cartilage. In our efforts to develop foundational technologies for joint hyaline cartilage repair and reconstruction, we conducted this study to obtain an answer to this question. We created an experimental canine model of knee joint cartilage damage, transplanted ear-derived autologous cartilage progenitor cells. The reconstructed cartilage was rich in proteoglycans and showed unique histological characteristics similar to joint hyaline cartilage. In addition, mechanical properties of the reconstructed tissues were higher than those of ear cartilage and equal to those of joint hyaline cartilage. This study suggested that joint hyaline cartilage was reconstructed from ear-derived cartilage progenitor cells. It also demonstrated that ear-derived cartilage progenitor cells, which can be harvested by a minimally invasive method, would be useful for reconstructing joint hyaline cartilage in patients with degenerative arthropathies. © AlphaMed Press.

17 CFR 200.40 - Joint disposition of business by Commission meeting.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 2 2010-04-01 2010-04-01 false Joint disposition of business... EXCHANGE COMMISSION ORGANIZATION; CONDUCT AND ETHICS; AND INFORMATION AND REQUESTS Disposition of Commission Business § 200.40 Joint disposition of business by Commission meeting. Any meeting of the...

Short presentation of the activities of the Joint Research Center, Ispra establishment in the field of material research in reactor safety

Energy Technology Data Exchange (ETDEWEB)

Larsson, H [JRC, Ispra (Italy)

1977-07-01

The Commission of the European Communities (CEC) disposes of a joint Research Center (JRC) composed of four establishments. In the ISPRA establishment, which is the largest of four, the largest project, Reactor Safety, includes the following: reliability analysis; blowdown; sodium thermohydraulics; fuel-coolant interaction and post accident heat removal; dynamic structural loading and response (LMFBR); structural failure prevention. The last is described in this paper. It deals with: code validation program for primary containment response in a LMFBR following core disruptive accident (COVA); dynamic material testing; fracture mechanics; creep fatigue; creep crack growth; creep damage evaluation; non-destructive testing.

Will Undergraduate Students Play Games to Learn How to Conduct Library Research?

Science.gov (United States)

Markey, Karen; Swanson, Fritz; Jenkins, Andrea; Jennings, Brian; St. Jean, Beth; Rosenberg, Victor; Yao, Xingxing; Frost, Robert

2009-01-01

This exploratory study examines whether undergraduate students will play games to learn how to conduct library research. Results indicate that students will play games that are an integral component of the course curriculum and enable them to accomplish overall course goals at the same time they learn about library research. (Contains 1 table.)

Conducting Action Research in Kenyan Primary Schools: A Narrative of Lived Experiences

Science.gov (United States)

Otienoh, Ruth

2015-01-01

This paper is a narrative of my personal experiences of conducting action research in Kenyan primary schools. It highlights the opportunities, successes, challenges and dilemmas I encountered during the process: from the school hunting period, to the carrying out of the actual research in two schools, with four teachers. This study reveals that…

Factors that Motivate Business Faculty to Conduct Research: An Expectancy Theory Analysis

Science.gov (United States)

Chen, Yining; Gupta, Ashok; Hoshower, Leon

2006-01-01

In this study, the authors used expectancy theory to examine key factors that motivate business faculty to conduct research. The survey results, from 320 faculty members at 10 business schools, showed that faculty members who assign higher importance ratings to both the extrinsic and the intrinsic rewards of research exhibit higher research…

Conducting wine marketing research with impact in China: Guidelines for design, execution and dissemination

Directory of Open Access Journals (Sweden)

Justin Cohen

2017-12-01

Full Text Available China is the fastest growing wine market, but conducting research there is fraught with a variety of issues. This article explores some of the issues the authors have dealt with in conducting wine marketing research in China over the last five years. We discuss issues with the design of research to focus on important issues for both academics and the industry. We relate the key problems in gaining proper translation and useful sampling procedures. Finally, we provide some guidelines for communicating results effectively to different members of the wine trade.

Identifying the barriers to conducting outcomes research in integrative health care clinic settings - a qualitative study

Directory of Open Access Journals (Sweden)

Findlay-Reece Barbara

2010-01-01

Full Text Available Abstract Background Integrative health care (IHC is an interdisciplinary blending of conventional medicine and complementary and alternative medicine (CAM with the purpose of enhancing patients' health. In 2006, we designed a study to assess outcomes that are relevant to people using such care. However, we faced major challenges in conducting this study and hypothesized that this might be due to the lack of a research climate in these clinics. To investigate these challenges, we initiated a further study in 2008, to explore the reasons why IHC clinics are not conducting outcomes research and to identify strategies for conducting successful in-house outcomes research programs. The results of the latter study are reported here. Methods A total of 25 qualitative interviews were conducted with key participants from 19 IHC clinics across Canada. Basic content analysis was used to identify key themes from the transcribed interviews. Results Barriers identified by participants fell into four categories: organizational culture, organizational resources, organizational environment and logistical challenges. Cultural challenges relate to the philosophy of IHC, organizational leadership and practitioner attitudes and beliefs. Participants also identified significant issues relating to their organization's lack of resources such as funding, compensation, infrastructure and partnerships/linkages. Environmental challenges such as the nature of a clinic's patient population and logistical issues such as the actual implementation of a research program and the applicability of research data also posed challenges to the conduct of research. Embedded research leadership, integration of personal and professional values about research, alignment of research activities and clinical workflow processes are some of the factors identified by participants that support IHC clinics' ability to conduct outcomes research. Conclusions Assessing and enhancing the broader

MR diagnosis of temporomandibular joint. A study of joint effusion

International Nuclear Information System (INIS)

Kaneda, Takashi; Yamashiro, Mitsuaki; Ozawa, Kaoru; Suzuki, Hiromi; Okada, Hiroyuki; Yamamoto, Hirotsugu

1998-01-01

The purposes of this study were to evaluate the relationship between correlation of MR joint effusion of the temporomandibular joint and disk position, to evaluate the relationship between joint effusion and aging, and to assess the frequency of MR joint effusion of bilateral temporomandibular joints. The temporomandibular joints of 192 patients with clinical symptoms of temporomandibular joint disorders were imaged bilaterally using high field, surface-coil MR imaging. Oblique sagittal and coronal proton density-weighted and T2-weighted images were obtained. Imaging findings of joint effusion were correlated with disk position, aging, and bilateral temporomandibular joints. MR showed effusion in 4% of the joints with normal superior disk position, 36% of the joints with disk displacement with reduction, and 45% of the joints with disk displacement without reduction. There were significant differences in the incidence of joint effusion between normal disk position and anterior disk displacement with or without reduction. Younger patients less than 40 years were significant higher the incidence of joint effusion than those of older patients. A significant association was seen between joint effusion and aging. MR showed effusion in 17% of the unilateral temporomandibular joint, 24% of the bilateral temporomandibular joints. There was no significant difference between unilateral and bilateral case. These results indicated that joint effusion using MR imaging was associated with varied temporomandibular joint pathologic states. (author)

Conducting qualitative research in the context of pre-existing peer and collegial relationships.

Science.gov (United States)

McDermid, Fiona; Peters, Kath; Jackson, Debra; Daly, John

2014-05-01

To highlight issues and challenges faced in recruitment and interviewing during a study that sought to explore the transition of nurses into academic life and the associated ethical implications. This paper explores the challenges faced in conducting research where the potential participants are peers and workplace colleagues. There are advantages when conducting research with those among whom a pre-existing relationship is shared. However, difficulties can also arise. A methodological review was undertaken. Key database searches included CINAHL, MEDLINE, PubMed, Scopus and Google Scholar using the keywords as search terms. Studies were included if they described in detail issues surrounding qualitative interviewing of peers and colleagues. Management of the issues involved is discussed, with emphasis on boundaries, trust and rapport, the use of self-disclosure and maintaining confidentiality. Research involving peers and colleagues has received relatively little consideration in the literature. There are difficulties associated with interviewing participants with whom the researcher has a pre-existing and ongoing relationship in the same organisation. To ensure ethical conduct, strategies can be used to mitigate negative situations such as issues surrounding dual roles, practising reflexivity, trust and rapport, self-disclosure and confidentiality. It is imperative that dual roles are declared and acknowledged. Researchers need to be mindful of the difficulties that may occur and prioritise participants' confidentiality and privacy.

EdD Students’ Self-Efficacy and Interest in Conducting Research

Directory of Open Access Journals (Sweden)

Monica R Kerrigan

2016-03-01

Full Text Available Today’s educational practitioners are expected to know how to gather, analyze, and report on data for accountability purposes and to use that information to improve student outcomes. However, there is little understanding of how to support practitioners’ learning of and engagement with research and few studies on the research experiences of students enrolled in Doctorate of Education (EdD programs. The success of students enrolled in Doctor of Philosophy (PhD programs in conducting research has been found to be related to students’ self-efficacy and interest, but these concepts have not been explored with EdD students who are more likely to engage in applied research in their workplace than to create a research-focused career. This study sought to understand the self-efficacy and interest that EdD students enrolled in an Educational Leadership program have in research skills and tasks in order to improve research course offerings. Our findings with EdD students are consistent with existing research on PhD students regarding research self-efficacy but we did not observe significant changes in students’ interest over time. We suggest avenues for future study in light of current accountability reporting requirements for practitioners.

Hydrocolonotherapy ankle joints after injuries

Directory of Open Access Journals (Sweden)

Volodymyr Muchin

2016-02-01

Full Text Available Purpose: to improve efficiency of gydrokinesitherapy by means of specially designed devices and monolasts for patients after ankle joint injuries. Material & Methods: there are pedagogical methods, clinical and radiological methods, anthropometric measurements and goniometry were used. Results: the author's technique of hydrokinesitherapy with application hydrokinesimechanotherapy device in the program of physical rehabilitation which provides optimum conditions for the recovery process was developed. Conclusions: the specially designed hydrokinesomechanotherapeutic device and monolasts are allow strictly controlled movement in all planes of the ankle joint, which contributes to the acceleration of the recovery; the conducted anthropometric and goniometric studies were indicate more rapid elimination of edema, increase movement amplitude, carries opposition to the development of contractures and muscle atrophy.

Belgium and France join forces in measuring instrument research. SCK-CEN and CEA are jointly developing an innovative type of gamma detector

International Nuclear Information System (INIS)

Vermeeren, L.

2011-01-01

Real-time monitoring is extremely important to accurately interpret irradiation experiments in research reactors. SCK-CEN has years of expertise in developing sensors to monitor neutron flux, temperature, gamma radiation, etc. It has been collaborating with the CEA since 2006. Both partners share research and research results in the Laboratoire Commun de Instrumentation. Recently, a joint patent application was made for a new type of sensor to measure gamma rays.

Research investigations in oil shale, tar sand, coal research, advanced exploratory process technology, and advanced fuels research: Volume 1 -- Base program. Final report, October 1986--September 1993

Energy Technology Data Exchange (ETDEWEB)

Smith, V.E.

1994-05-01

Numerous studies have been conducted in five principal areas: oil shale, tar sand, underground coal gasification, advanced process technology, and advanced fuels research. In subsequent years, underground coal gasification was broadened to be coal research, under which several research activities were conducted that related to coal processing. The most significant change occurred in 1989 when the agreement was redefined as a Base Program and a Jointly Sponsored Research Program (JSRP). Investigations were conducted under the Base Program to determine the physical and chemical properties of materials suitable for conversion to liquid and gaseous fuels, to test and evaluate processes and innovative concepts for such conversions, to monitor and determine environmental impacts related to development of commercial-sized operations, and to evaluate methods for mitigation of potential environmental impacts. This report is divided into two volumes: Volume 1 consists of 28 summaries that describe the principal research efforts conducted under the Base Program in five topic areas. Volume 2 describes tasks performed within the JSRP. Research conducted under this agreement has resulted in technology transfer of a variety of energy-related research information. A listing of related publications and presentations is given at the end of each research topic summary. More specific and detailed information is provided in the topical reports referenced in the related publications listings.

Barriers and Solutions to Conducting Large International, Interdisciplinary Research Projects

Science.gov (United States)

Pischke, Erin C.; Knowlton, Jessie L.; Phifer, Colin C.; Gutierrez Lopez, Jose; Propato, Tamara S.; Eastmond, Amarella; de Souza, Tatiana Martins; Kuhlberg, Mark; Picasso Risso, Valentin; Veron, Santiago R.; Garcia, Carlos; Chiappe, Marta; Halvorsen, Kathleen E.

2017-12-01

Global environmental problems such as climate change are not bounded by national borders or scientific disciplines, and therefore require international, interdisciplinary teamwork to develop understandings of their causes and solutions. Interdisciplinary scientific work is difficult enough, but these challenges are often magnified when teams also work across national boundaries. The literature on the challenges of interdisciplinary research is extensive. However, research on international, interdisciplinary teams is nearly non-existent. Our objective is to fill this gap by reporting on results from a study of a large interdisciplinary, international National Science Foundation Partnerships for International Research and Education (NSF-PIRE) research project across the Americas. We administered a structured questionnaire to team members about challenges they faced while working together across disciplines and outside of their home countries in Argentina, Brazil, and Mexico. Analysis of the responses indicated five major types of barriers to conducting interdisciplinary, international research: integration, language, fieldwork logistics, personnel and relationships, and time commitment. We discuss the causes and recommended solutions to the most common barriers. Our findings can help other interdisciplinary, international research teams anticipate challenges, and develop effective solutions to minimize the negative impacts of these barriers to their research.

Barriers and Solutions to Conducting Large International, Interdisciplinary Research Projects.

Science.gov (United States)

Pischke, Erin C; Knowlton, Jessie L; Phifer, Colin C; Gutierrez Lopez, Jose; Propato, Tamara S; Eastmond, Amarella; de Souza, Tatiana Martins; Kuhlberg, Mark; Picasso Risso, Valentin; Veron, Santiago R; Garcia, Carlos; Chiappe, Marta; Halvorsen, Kathleen E

2017-12-01

Global environmental problems such as climate change are not bounded by national borders or scientific disciplines, and therefore require international, interdisciplinary teamwork to develop understandings of their causes and solutions. Interdisciplinary scientific work is difficult enough, but these challenges are often magnified when teams also work across national boundaries. The literature on the challenges of interdisciplinary research is extensive. However, research on international, interdisciplinary teams is nearly non-existent. Our objective is to fill this gap by reporting on results from a study of a large interdisciplinary, international National Science Foundation Partnerships for International Research and Education (NSF-PIRE) research project across the Americas. We administered a structured questionnaire to team members about challenges they faced while working together across disciplines and outside of their home countries in Argentina, Brazil, and Mexico. Analysis of the responses indicated five major types of barriers to conducting interdisciplinary, international research: integration, language, fieldwork logistics, personnel and relationships, and time commitment. We discuss the causes and recommended solutions to the most common barriers. Our findings can help other interdisciplinary, international research teams anticipate challenges, and develop effective solutions to minimize the negative impacts of these barriers to their research.

Conducting longitudinal, process-oriented research with conflict-affected youth: Solving the inevitable challenges.

Science.gov (United States)

Dubow, Eric F; Aber, J Lawrence; Betancourt, Theresa S; Cummings, E Mark; Huesmann, L Rowell

2017-02-01

The reader might get the impression that the four projects described in this Special Section proceeded in a systematic and predictable way. Of course, those of us engaged in each research project encountered pitfalls and challenges along the way. A main goal of this Special Section is to provide pathways and encouragement for those who may be interested in advancing high-quality research on this topic. In this paper, we describe a set of practical and ethical challenges that we encountered in conducting our longitudinal, process-oriented, and translational research with conflict-affected youth, and we illustrate how problems can be solved with the goal of maintaining the internal and external validity of the research designs. We are hopeful that by describing the challenges of our work, and how we overcame them, which are seldom treated in this or any other literature on research on child development in high-risk contexts, we can offer a realistic and encouraging picture of conducting methodologically sound research in conflict-affected contexts.

HIP JOINT AND HIP ENDOPROSTHESIS BIOMECHANICS

OpenAIRE

Jakub Gryka

2017-01-01

This article contains a description of the basic issues related to anatomy, loading of hip joint and its endoprosthesis research methods. The methods of testing and simulating hip joint loads, factors that influence the selection of parameters during the design of prostheses, typical solutions to engineering problems related to this topic are presented. The article concludes with short summary of the finite element method for the design of hip replacements.

Research on fatigue behavior and residual stress of large-scale cruciform welding joint with groove

International Nuclear Information System (INIS)

Zhao, Xiaohui; Liu, Yu; Liu, Yong; Gao, Yuan

2014-01-01

Highlights: • The fatigue behavior of the large-scale cruciform welding joint with groove was studied. • The longitudinal residual stress of the large-scale cruciform welding joint was tested by contour method. • The fatigue fracture mechanism of the large-scale cruciform welding joint with groove was analyzed. - Abstract: Fatigue fracture behavior of the 30 mm thick Q460C-Z steel cruciform welded joint with groove was investigated. The fatigue test results indicated that fatigue strength of 30 mm thick Q460C-Z steel cruciform welded joint with groove can reach fatigue level of 80 MPa (FAT80). Fatigue crack source of the failure specimen initiated from weld toe. Meanwhile, the microcrack was also found in the fusion zones of the fatigue failure specimen, which was caused by weld quality and weld metal integrity resulting from the multi-pass welds. Two-dimensional map of the longitudinal residual stress of 30 mm thick Q460C-Z steel cruciform welded joint with groove was obtained by using the contour method. The stress nephogram of Two-dimensional map indicated that longitudinal residual stress in the welding center is the largest

Architectural and structural qualities in timber joints

DEFF Research Database (Denmark)

Christensen, Jesper Thøger; Christensen, Mogens Fiil; Damkilde, Lars

2016-01-01

Design of joints in timber structures is crucial to reach both elegant and structural efficient designs. Design of joints should therefore be an integral part of the conceptual design phase. Traditionally this is not the case, and joints are often solely designed and analysed in the engineering...... but also increase timbers competitiveness in the building industry. The paper is part of an ongoing research project aiming at providing tools for an integrated design process for timber structures. The focus of the paper is to identify how structure and its joints contributes to architecture and vice...... design phase. The result is joints that function structurally but do not add value to the design, and may even compromise the architectural ideas. With an approach, integrating both structural and architectural design from the beginning, one should not only gain better structures and architecture...

The development of a graphite to copper joint for injector diagnostics

International Nuclear Information System (INIS)

Baker, D.

1975-09-01

A successful method of joining soft graphite to copper, to achieve a high thermal conductivity joint, is described, together with initial attempts and the difficulties experienced. The graphite, after an initial treatment, was flame sprayed with copper. The main copper-to-graphite joint was of silver solder. (U.K.)

Research report of fiscal 1997. Basic research on joint implementation for preventing global climate changes; 1998 nendo chosa hokokusho. Kyodo jisshi kiso chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Research was made to promote Activities Implemented Jointly Japan Program. Joint Implementation (JI) is the methodology for preventing global climate changes by collaboration of countries. The countries take cooperative actions for reduction, absorption and fixation of greenhouse gases, and effectively distribute the reduction credits among relevant parties. This was decided in the first session of the Conference of Parties (COP) held in March, 1995. In COP3, Japan`s assigned reduction amount in 2008-2012 was determined as 6% of the emission level in 1990. The protocol defines JI between parties as dealings of emission reduction units, and JI between developing countries as clean development mechanism. The rules for a base line and credit distribution are necessary before full-scale implementation. Although JI is regarded as an important cost-effective project, it is important to decide where and how the JI projects should been promoted. The present state and issues of the primary approved project of Japan Program are arranged. In particular, various terms related to developing countries remain to be solved. 21 figs., 32 tabs.

A Methodology for Conducting Integrative Mixed Methods Research and Data Analyses

Science.gov (United States)

Castro, Felipe González; Kellison, Joshua G.; Boyd, Stephen J.; Kopak, Albert

2011-01-01

Mixed methods research has gained visibility within the last few years, although limitations persist regarding the scientific caliber of certain mixed methods research designs and methods. The need exists for rigorous mixed methods designs that integrate various data analytic procedures for a seamless transfer of evidence across qualitative and quantitative modalities. Such designs can offer the strength of confirmatory results drawn from quantitative multivariate analyses, along with “deep structure” explanatory descriptions as drawn from qualitative analyses. This article presents evidence generated from over a decade of pilot research in developing an integrative mixed methods methodology. It presents a conceptual framework and methodological and data analytic procedures for conducting mixed methods research studies, and it also presents illustrative examples from the authors' ongoing integrative mixed methods research studies. PMID:22167325

Summary of Work for Joint Research Interchanges with DARWIN Integrated Product Team 1998

Science.gov (United States)

Hesselink, Lambertus

1999-01-01

The intent of Stanford University's SciVis group is to develop technologies that enabled comparative analysis and visualization techniques for simulated and experimental flow fields. These techniques would then be made available under the Joint Research Interchange for potential injection into the DARWIN Workspace Environment (DWE). In the past, we have focused on techniques that exploited feature based comparisons such as shock and vortex extractions. Our current research effort focuses on finding a quantitative comparison of general vector fields based on topological features. Since the method relies on topological information, grid matching and vector alignment is not needed in the comparison. This is often a problem with many data comparison techniques. In addition, since only topology based information is stored and compared for each field, there is a significant compression of information that enables large databases to be quickly searched. This report will briefly (1) describe current technologies in the area of comparison techniques, (2) will describe the theory of our new method and finally (3) summarize a few of the results.

Geo-engineering, Governance, and Social-Ecological Systems: Critical Issues and Joint Research Needs

Directory of Open Access Journals (Sweden)

Victor Galaz

2012-03-01

Full Text Available The debate about the possibilities to engineer the Earth's climate has changed drastically in the last years. Suggestions of large-scale technological interventions to combat climate change that a decade ago would have been discarded as science fiction are slowly moving into the center of international climate change discussions, research, and politics. In this article, I elaborate three joint key challenges to geo-engineering research from a resilience perspective, with a special emphasis on governance issues. First, I discuss the need to understand geo-engineering proposals from a "planetary boundaries" perspective. Second, I elaborate why the notion of Earth stewardship and geo-engineering are not necessarily in conflict, but instead could be viewed as complementary approaches. Last, I discuss the critical need to explore an institutional setting that is strong enough to weed out geo-engineering proposals that carry considerable ecological risk, but still allow for novelty, fail-safe experimentation, and continuous learning. These issues are critical for our understanding of how to effectively govern global environmental risks, complex systems, and emerging technologies in the Anthropocene.

Overview and status of the Next European Dipole Joint Research Activity

International Nuclear Information System (INIS)

Devred, A; Baudouy, B; Baynham, D E

2006-01-01

The Next European Dipole (NED) Joint Research Activity was launched on 1 January 2004 to promote the development of high-performance Nb 3 Sn conductors in collaboration with European industry (aiming at a non-copper critical current density of 1500 A mm -2 at 4.2 K and 15 T) and to assess the suitability of Nb 3 Sn technology to the next generation of accelerator magnets (aiming at an aperture of 88 mm and a conductor peak field of ∼15 T). It is part of the Coordinated Accelerator Research in Europe (CARE) project, which involves eight collaborators, and is half-funded by the European Union. After briefly recalling the Activity organization, we report the main progress achieved over the last year, which includes: the manufacturing of a double-bath He II cryostat for heat transfer measurements through Nb 3 Sn conductor insulation, detailed quench computations for various NED-like magnet configurations, the award of two industrial subcontracts for Nb 3 Sn conductor development, the first results of a cross-calibration programme of test facilities for Nb 3 Sn wire characterization, detailed investigations of the mechanical properties of heavily cold-drawn Cu/Nb/Sn composite wires, and the preliminary assessment of a new insulation system based on polyimide-sized glass fibre tapes. Last, we briefly review the efforts of an ongoing Working Group on magnet design and optimization

Empirical Study of Distinct Features and Challenges of Joint Development of Information Systems: The Case of ABC Bank

Institute of Scientific and Technical Information of China (English)

MAO Jiye; SONG Wenmo

2008-01-01

The internal development and outsourced development of information systems have been studied intensively, but little research has been conducted on the joint development mode. This paper describes the benefits and problems encountered in the joint development of accounting management information systems based on a real case. The case illustrates some distinct advantages, such as full control over the development schedule, the flexibility with resource allocation, and insurance for sustained active participation by the end-users. However, this development mode also involves potential problems, e.g., potential conflicts arising from diverse backgrounds and cultures of the various stakeholders and challenges to manage personnel from outside partners.

Experimental and numerical study of Bondura® 6.6 PIN joints

Science.gov (United States)

Berkani, I.; Karlsen, Ø.; Lemu, H. G.

2017-12-01

Pin joints are widely used in heavy-duty machinery such as aircrafts, cranes and offshore drilling equipment to transfer multi-dimensional shear forces. Their strength and service life depend on the clamping force in the contact region that is provided by interference fits. Though the interference fits provide full contact at the pin-hole interface under pretension loads, the contact interface reduces when the pin is subjected to an external load and hence a smaller contact surface leads to dramatic increase of the contact stress. The PIN joint of Bondura® Technology, investigated in this study, is an innovative solution intended to reduce the slack at the contact surface of the pin joint of heavy-duty machinery by using tapered sleeves on each end of the PIN. The study is aimed to better understand the contact pressure build-up and stress distribution in the supporting contact surface under pre-loading of the joint and the influence of temperature difference between part assembly and operation conditions. Numerical simulation using finite element method and diverse experimental tests were conducted. The numerical simulation and the test results, particularly the tests conducted with lubricated joints, show good conformance.

Phalangeal joints kinematics during ostrich (Struthio camelus locomotion

Directory of Open Access Journals (Sweden)

Rui Zhang

2017-01-01

Full Text Available The ostrich is a highly cursorial bipedal land animal with a permanently elevated metatarsophalangeal joint supported by only two toes. Although locomotor kinematics in walking and running ostriches have been examined, these studies have been largely limited to above the metatarsophalangeal joint. In this study, kinematic data of all major toe joints were collected from gaits with double support (slow walking to running during stance period in a semi-natural setup with two selected cooperative ostriches. Statistical analyses were conducted to investigate the effect of locomotor gait on toe joint kinematics. The MTP3 and MTP4 joints exhibit the largest range of motion whereas the first phalangeal joint of the 4th toe shows the largest motion variability. The interphalangeal joints of the 3rd and 4th toes present very similar motion patterns over stance phases of slow walking and running. However, the motion patterns of the MTP3 and MTP4 joints and the vertical displacement of the metatarsophalangeal joint are significantly different during running and slow walking. Because of the biomechanical requirements, osctriches are likely to select the inverted pendulum gait at low speeds and the bouncing gait at high speeds to improve movement performance and energy economy. Interestingly, the motions of the MTP3 and MTP4 joints are highly synchronized from slow to fast locomotion. This strongly suggests that the 3rd and 4th toes really work as an “integrated system” with the 3rd toe as the main load bearing element whilst the 4th toe as the complementary load sharing element with a primary role to ensure the lateral stability of the permanently elevated metatarsophalangeal joint.

Computed vs. conventional radiography for detecting fatigue cracks in riveted lap joints of aeronautical grade hybrid fiber-metal laminate Glare

International Nuclear Information System (INIS)

Tarpani, J.R.; Hideki Shinohara, A.; Da Silva, R.R.; Do Val Lacerda, N.

2007-01-01

This study aimed at assessing the capability of three different radiographic approaches (two computed or digital, and one conventional or analogous) for imaging fatigue cracks in riveted lap joints of composite fiber-metal laminate Glare. These structural joints are unique in the sense that fatigue cracks develop mainly at the faying surfaces of Glare sheets, so that visual detection is largely prevented and nondestructive inspection becomes mandatory. For this purpose, a round-robin programme comprising several industrial and research centers that employ X-ray radiography routinely to inspect high-demanding equipments, components and structures was conducted. (authors)

Challenges in conducting research in pediatric long-term care facilities.

Science.gov (United States)

Larson, Elaine L; Cohen, Bevin; Murray, Meghan; Saiman, Lisa

2014-10-01

Children residing in long-term care facilities (LTCFs) have complex medical problems and unique care needs, yet research in this setting is rare. As part of an intervention study to improve patient safety (Keep It Clean for Kids [KICK]), we describe the challenges encountered and recommend approaches to build a successful and sustained collaborative relationship between pediatric LTCFs and the research team. We implemented a program with 5 components: leadership commitment, active staff participation by the creation of KICK teams, workflow assessments, staff training in the World Health Organization's "5 Moments for Hand Hygiene," and electronic monitoring and feedback to staff regarding hand hygiene practices. Major challenges encountered were establishing trust, building research teams, enhancing staff participation, and engaging families and visitors. Approaches to deal with these challenges are discussed. Conducting research in pediatric LTCFs requires sustained commitment to dealing with challenges and establishing collaborative relationships with administrative and frontline staff. © The Author(s) 2014.

Iranian Joint Registry(Iranian National Hip and Knee Arthroplasty Registry

Directory of Open Access Journals (Sweden)

Hamidreza Aslani

2016-04-01

Full Text Available Periodic evaluation and monitoring the health and economic outcome of joint replacement surgery is a common and popular process under the territory of joint registries in many countries. In this article we introduce the methodology used for the foundation of the National Iranian Joint Registry (IJR with a joint collaboration of the Social Security Organization (SSO and academic research departments considering the requirements of the Iran’s Ministry of Health and Education.

Establishing good collaborative research practices in the responsible conduct of research in nursing science.

Science.gov (United States)

Ulrich, Connie M; Wallen, Gwenyth R; Cui, Naixue; Chittams, Jesse; Sweet, Monica; Plemmons, Dena

2015-01-01

Team science is advocated to speed the pace of scientific discovery, yet the goals of collaborative practice in nursing science and the responsibilities of nurse stakeholders are sparse and inconclusive. The purpose of this study was to examine nurse scientists' views on collaborative research as part of a larger study on standards of scientific conduct. Web-based descriptive survey of nurse scientists randomly selected from 50 doctoral graduate programs in the United States. Nearly forty percent of nurse respondents were not able to identify good collaborative practices for the discipline; more than three quarters did not know of any published guidelines available to them. Successful research collaborations were challenged by different expectations of authorship and data ownership, lack of timeliness and communication, poorly defined roles and responsibilities, language barriers, and when they involve junior and senior faculty working together on a project. Individual and organizational standards, practices, and policies for collaborative research needs clarification within the discipline. Copyright © 2015 Elsevier Inc. All rights reserved.

Joint tests at INL and CEA of a transient hot wire needle probe for in-pile thermal conductivity measurement

International Nuclear Information System (INIS)

Daw, J.E.; Knudson, D.L.; Villard, J.F.; Liothin, J.; Destouches, C.; Rempe, J.L.; Matheron, P.; Lambert, T.

2015-01-01

fabricated for both room temperature proof-of-concept evaluations and high temperature testing. Evaluations have been performed jointly by the INL and the French Alternative Energies and Atomic Energy Commission (CEA), both in Idaho Falls (USA) and in Cadarache (France), in the framework of a collaborative program for instrumentation of Material Testing Reactors. Initial tests were conducted on samples with a large range of thermal conductivities and temperatures ranging from 20 deg. C to 600 deg. C. Particularly, tests were recently performed on a sample having thermal conductivity and dimensions similar to UO 2 and MOX nuclear fuels, in order to validate the ability of this sensor to operate for in-pile characterization of Light Water Reactors fuels. The results of the tests already completed at INL and CEA indicate that the Transient Hot Wire Needle Probe offers an enhanced method for in-pile detection of thermal conductivity. (authors)

Joint tests at INL and CEA of a transient hot wire needle probe for in-pile thermal conductivity measurement

Energy Technology Data Exchange (ETDEWEB)

Daw, J.E.; Knudson, D.L. [Idaho National Laboratory, Idaho Falls, ID 83415, (United States); Villard, J.F.; Liothin, J.; Destouches, C. [CEA, DEN, DER, Instrumentation Sensors and Dosimetry Laboratory, Cadarache, F-13108 St Paul-Lez-Durance, (France); Rempe, J.L. [Rempe and Associates, LLC, Idaho Falls, ID, 83404 (United States); Matheron, P. [CEA, DEN, DEC, Uranium Fuels Laboratory, Cadarache, F-13108 St Paul-Lez-Durance, (France); Lambert, T. [CEA, DEN, DEC, Innovative Fuel Design and Irradiation Laboratory, Cadarache, F-13108 St Paul-Lez-Durance, (France)

2015-07-01

fabricated for both room temperature proof-of-concept evaluations and high temperature testing. Evaluations have been performed jointly by the INL and the French Alternative Energies and Atomic Energy Commission (CEA), both in Idaho Falls (USA) and in Cadarache (France), in the framework of a collaborative program for instrumentation of Material Testing Reactors. Initial tests were conducted on samples with a large range of thermal conductivities and temperatures ranging from 20 deg. C to 600 deg. C. Particularly, tests were recently performed on a sample having thermal conductivity and dimensions similar to UO{sub 2} and MOX nuclear fuels, in order to validate the ability of this sensor to operate for in-pile characterization of Light Water Reactors fuels. The results of the tests already completed at INL and CEA indicate that the Transient Hot Wire Needle Probe offers an enhanced method for in-pile detection of thermal conductivity. (authors)

Walking velocity and step length adjustments affect knee joint contact forces in healthy weight and obese adults.

Science.gov (United States)

Milner, Clare E; Meardon, Stacey A; Hawkins, Jillian L; Willson, John D

2018-04-28

Knee osteoarthritis is a major public health problem and adults with obesity are particularly at risk. One approach to alleviating this problem is to reduce the mechanical load at the joint during daily activity. Adjusting temporospatial parameters of walking could mitigate cumulative knee joint mechanical loads. The purpose of this study was to determine how adjustments to velocity and step length affects knee joint loading in healthy weight adults and adults with obesity. We collected three-dimensional gait analysis data on 10 adults with a normal body mass index and 10 adults with obesity during over ground walking in nine different conditions. In addition to preferred velocity and step length, we also conducted combinations of 15% increased and decreased velocity and step length. Peak tibiofemoral joint impulse and knee adduction angular impulse were reduced in the decreased step length conditions in both healthy weight adults (main effect) and those with obesity (interaction effect). Peak knee joint adduction moment was also reduced with decreased step length, and with decreased velocity in both groups. We conclude from these results that adopting shorter step lengths during daily activity and when walking for exercise can reduce mechanical stimuli associated with articular cartilage degenerative processes in adults with and without obesity. Thus, walking with reduced step length may benefit adults at risk for disability due to knee osteoarthritis. Adopting a shorter step length during daily walking activity may reduce knee joint loading and thus benefit those at risk for knee cartilage degeneration. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 9999:XX-XX, 2018. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

Conducting Online Behavioral Research Using Crowdsourcing Services in Japan.

Science.gov (United States)

Majima, Yoshimasa; Nishiyama, Kaoru; Nishihara, Aki; Hata, Ryosuke

2017-01-01

Recent research on human behavior has often collected empirical data from the online labor market, through a process known as crowdsourcing. As well as the United States and the major European countries, there are several crowdsourcing services in Japan. For research purpose, Amazon's Mechanical Turk (MTurk) is the widely used platform among those services. Previous validation studies have shown many commonalities between MTurk workers and participants from traditional samples based on not only personality but also performance on reasoning tasks. The present study aims to extend these findings to non-MTurk (i.e., Japanese) crowdsourcing samples in which workers have different ethnic backgrounds from those of MTurk. We conducted three surveys ( N = 426, 453, 167, respectively) designed to compare Japanese crowdsourcing workers and university students in terms of their demographics, personality traits, reasoning skills, and attention to instructions. The results generally align with previous studies and suggest that non-MTurk participants are also eligible for behavioral research. Furthermore, small screen devices are found to impair participants' attention to instructions. Several recommendations concerning this sample are presented.

[Research Conducted at the Institute for Computer Applications in Science and Engineering

Science.gov (United States)

1997-01-01

This report summarizes research conducted at the Institute for Computer Applications in Science and Engineering in applied mathematics, fluid mechanics, and computer science during the period 1 Oct. 1996 - 31 Mar. 1997.

Properties of 13HMF steel welded joints after long-lasting service

International Nuclear Information System (INIS)

Zeman, M.

2002-01-01

Results are presented of research conducted on the 13HMF steel in the as-received condition after long-lasting service over 100000 hours. Simulation tests have been performed by means of modern research methods. The influence of thermal cycles on the microstructure (continuous cooling TTT diagrams), plastic properties (notch toughness and hardness) of simulated heat affected zones and reheat cracking resistance has been evaluated by using the thermal and strain cycle simulator. Susceptibility to thermal fatigue has been determined, the creep strength estimated and welding heat input was given, as well as the post weld heat treatment conditions of the 13HMF steel after service. properties of the welded joints made of 13HMF steel after long-lasting service are given. (author)

Quantify Plasma Response to Non-Axisymmetric (3D) Magnetic Fields in Tokamaks, Final Report for FES (Fusion Energy Sciences) FY2014 Joint Research Target

International Nuclear Information System (INIS)

Strait, E. J.; Park, J. K.; Marmar, E. S.; Ahn, J. W.; Berkery, J. W.; Burrell, K. H.; Canik, J. M.; Delgado-Aparicio, L.; Ferraro, N. M.; Garofalo, A. M.; Gates, D. A.; Greenwald, M.; Kim, K.; King, J. D.; Lanctot, M. J.; Lazerson, S. A.; Liu, Y. Q.; Lore, J. D.; Menard, J. E.; Nazikian, R.; Shafer, M. W.; Paz-Soldan, C.; Reiman, A. H.; Rice, J. E.; Sabbagh, S. A.; Sugiyama, L.; Turnbull, A. D.; Volpe, F.; Wang, Z. R.; Wolfe, S. M.

2014-01-01

The goal of the 2014 Joint Research Target (JRT) has been to conduct experiments and analysis to investigate and quantify the response of tokamak plasmas to non-axisymmetric (3D) magnetic fields. Although tokamaks are conceptually axisymmetric devices, small asymmetries often result from inaccuracies in the manufacture and assembly of the magnet coils, or from nearby magnetized objects. In addition, non-axisymmetric fields may be deliberately applied for various purposes. Even at small amplitudes of order 10 -4 of the main axisymmetric field, such ''3D'' fields can have profound impacts on the plasma performance. The effects are often detrimental (reduction of stabilizing plasma rotation, degradation of energy confinement, localized heat flux to the divertor, or excitation of instabilities) but may in some case be beneficial (maintenance of rotation, or suppression of instabilities). In general, the magnetic response of the plasma alters the 3D field, so that the magnetic field configuration within the plasma is not simply the sum of the external 3D field and the original axisymmetric field. Typically the plasma response consists of a mixture of local screening of the external field by currents induced at resonant surfaces in the plasma, and amplification of the external field by stable kink modes. Thus, validated magnetohydrodynamic (MHD) models of the plasma response to 3D fields are crucial to the interpretation of existing experiments and the prediction of plasma performance in future devices. The non-axisymmetric coil sets available at each facility allow well-controlled studies of the response to external 3D fields. The work performed in support of the 2014 Joint Research Target has included joint modeling and analysis of existing experimental data, and collaboration on new experiments designed to address the goals of the JRT. A major focus of the work was validation of numerical models through quantitative comparison to experimental data

Quantify Plasma Response to Non-Axisymmetric (3D) Magnetic Fields in Tokamaks, Final Report for FES (Fusion Energy Sciences) FY2014 Joint Research Target

Energy Technology Data Exchange (ETDEWEB)

Strait, E. J. [General Atomics, San Diego, CA (United States); Park, J. -K. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Marmar, E. S. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Ahn, J. -W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Berkery, J. W. [Columbia Univ., New York, NY (United States); Burrell, K. H. [General Atomics, San Diego, CA (United States); Canik, J. M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Delgado-Aparicio, L. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Ferraro, N. M. [General Atomics, San Diego, CA (United States); Garofalo, A. M. [General Atomics, San Diego, CA (United States); Gates, D. A. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Greenwald, M. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Kim, K. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); King, J. D. [General Atomics, San Diego, CA (United States); Lanctot, M. J. [General Atomics, San Diego, CA (United States); Lazerson, S. A. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Liu, Y. Q. [Culham Science Centre, Abingdon (United Kingdom). Euratom/CCFE Association; Logan, N. C. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Lore, J. D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Menard, J. E. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Nazikian, R. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Shafer, M. W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Paz-Soldan, C. [General Atomics, San Diego, CA (United States); Reiman, A. H. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Rice, J. E. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Sabbagh, S. A. [Columbia Univ., New York, NY (United States); Sugiyama, L. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Turnbull, A. D. [General Atomics, San Diego, CA (United States); Volpe, F. [Columbia Univ., New York, NY (United States); Wang, Z. R. [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Wolfe, S. M. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

2014-09-30

The goal of the 2014 Joint Research Target (JRT) has been to conduct experiments and analysis to investigate and quantify the response of tokamak plasmas to non-axisymmetric (3D) magnetic fields. Although tokamaks are conceptually axisymmetric devices, small asymmetries often result from inaccuracies in the manufacture and assembly of the magnet coils, or from nearby magnetized objects. In addition, non-axisymmetric fields may be deliberately applied for various purposes. Even at small amplitudes of order 10^-4 of the main axisymmetric field, such “3D” fields can have profound impacts on the plasma performance. The effects are often detrimental (reduction of stabilizing plasma rotation, degradation of energy confinement, localized heat flux to the divertor, or excitation of instabilities) but may in some case be beneficial (maintenance of rotation, or suppression of instabilities). In general, the magnetic response of the plasma alters the 3D field, so that the magnetic field configuration within the plasma is not simply the sum of the external 3D field and the original axisymmetric field. Typically the plasma response consists of a mixture of local screening of the external field by currents induced at resonant surfaces in the plasma, and amplification of the external field by stable kink modes. Thus, validated magnetohydrodynamic (MHD) models of the plasma response to 3D fields are crucial to the interpretation of existing experiments and the prediction of plasma performance in future devices. The non-axisymmetric coil sets available at each facility allow well-controlled studies of the response to external 3D fields. The work performed in support of the 2014 Joint Research Target has included joint modeling and analysis of existing experimental data, and collaboration on new experiments designed to address the goals of the JRT. A major focus of the work was validation of numerical models through quantitative comparison to experimental data, in

Practical strategies and perceptions from community pharmacists following their experiences with conducting pharmacy practice research: a qualitative content analysis.

Science.gov (United States)

De Vera, Mary A; Campbell, Natasha K J; Chhina, Harpreet; Galo, Jessica S; Marra, Carlo

2017-10-26

While prior research identified barriers to conducting research in community pharmacies, there remains a need to better understand facilitators to ensure successful collaborations between academic researchers and pharmacists. Our objective was to determine the experiences and perspectives of community pharmacists who have recently conducted a pharmacy practice-based research study to gain in-depth understanding of challenges as well as facilitators and identify strategies and solutions. We conducted a qualitative study involving one-on-one semi-structured telephone interviews with community pharmacists following the completion of a practice-based research study in their pharmacies. Interview transcripts were analysed using inductive content analysis involving open coding, creating categories and abstraction into final themes. Eleven pharmacists participated in the qualitative interviews. We identified six major themes including: (1) barriers (e.g. time constraints); (2) facilitators (e.g. ideal pharmacy layout); (3) support and resources from academic researchers (e.g. helpfulness of training, easy-to-use study materials); (4) pharmacist-initiated strategies for conducting research (beyond prior suggestions from researchers); (5) suggestions for future pharmacy practice research; and (6) motivation for conducting pharmacy practice research. These findings informed practical strategies targeted at academic researchers and pharmacists, respectively, to facilitate the conduct of research in community pharmacists across various stages of the research process. Our study adds to better understanding of community pharmacists' perspectives on conducting research and identifies practical solutions that can be readily implemented by academic researchers and pharmacists participating in research. © 2017 Royal Pharmaceutical Society.

ECOWindS Joint Action Plan - Guidelines for Implementation

DEFF Research Database (Denmark)

2015-01-01

The Joint Action Plan (JAP) is a deliverable of the European Clusters for Offshore Wind Servicing (ECOWindS) project Work Package 4 (WP4) “Joint Action Plan”. It presents a plan of action or a roadmap for research, development, and innovation (RDI) for the Offshore Wind Service (OWS) industry. Th...

The post-formation management of international joint ventures

DEFF Research Database (Denmark)

Dao, Li

2014-01-01

International joint venture (IJV) is not a new organizational phenomenon in international business. Existing research in IJVs has provided a well-established body of knowledge informing much of the joint venture process from parent firms’ strategic consideration to implementation phase...... a sensemaking approach to IJV post-formation management in search of capturing such ‘soft’, invisible managerial processes in a visible conceptualization that contributes to a better understanding of this complex organizational phenomenon. Empirical insights from cases of Danish – Vietnamese joint ventures...

Perceptions and misconceptions regarding the Joint Commission's view of quality monitoring.

Science.gov (United States)

Patterson, C H

1989-10-01

The Joint Commission recently has revised its hospital standards for infection control to reflect more accurately current state-of-the-art practices. In addition, the Joint Commission's Agenda for Change initiatives include the development of clinical indicators; one of the topics that will be included in those clinical indicator sets will be infection control. How the hospital chooses to organize itself to conduct the historically required monitoring and evaluation of clinical patient care currently required by the standards of the Joint Commission is at the option of the hospital. How the hospital will organize and collect data specific to infection control indicators yet to be developed by the Joint Commission has not been determined and will not be defined until specific research and development projects are completed. The hospital is expected to have in place infection prevention, surveillance, and control programs; it also is expected to have in place a quality assurance program that focuses not only on solving identified problems but also on the improvement of patient care quality. How the hospitals organize and/or integrate these activities is also at its option. It is expected that qualified professionals will direct and enforce infection prevention, surveillance, and control practices; indicators for infection control can provide data that will help assess the relative success of those practices and activities. The Joint Commission is not developing the capability to judge, on its own part, the actual quality of care provided by an organization seeking accreditation. Rather, the Joint Commission is committed to developing more accurate means to evaluate the structures, processes, and outcomes of diagnosis and treatment activities, as well as their interrelationships. Clinical excellence is supported by quality in the organizational environment and the managerial and leadership contexts within which patient care is delivered. Both clinical and

Guidelines for Conducting Positivist Case Study Research in Information Systems

Directory of Open Access Journals (Sweden)

Graeme Shanks

2002-11-01

Full Text Available The case study research approach is widely used in a number of different ways within the information systems community. This paper focuses on positivist, deductive case study research in information systems. It provides clear definitions of important concepts in positivist case study research and illustrates these with an example research study. A critical analysis of the conduct and outcomes of two recently published positivist case studies is reported. One is a multiple case study that validated concepts in a framework for viewpoint development in requirements definition. The other is a single case study that examined the role of social enablers in enterprise resource planning systems implementation. A number of guidelines for successfully undertaking positivist case study research are identified including developing a clear understanding of key concepts and assumptions within the positivist paradigm; providing clear and unambiguous definitions of the units and interactions when using any theory; carefully defining the boundary of the theory used in the case study; using hypotheses rather than propositions in the empirical testing of theory; using fuzzy or probabilistic propositions in recognising that reality can never be perfectly known; selecting case studies carefully, particularly single case studies; and recognising that generalisation from positivist, single case studies is inherently different from generalisation from single experiments. When properly undertaken, positivist, deductive case study research is a valuable research approach for information systems researchers, particularly when used within pluralist research programs that use a number of different research approaches from different paradigms.

Are joint audits a proper instrument for increased audit quality?

OpenAIRE

Velte, Patrick; Azibi, Jamel

2015-01-01

Joint audits are recently controversial discussed to increase audit quality and decrease Audit market concentration in Europe, complementing the existing and future rotation rules by the 8th EC directive. First, this article presents a theoretical foundation of joint audits. In this context, the main influences on low balling are presented. The link between joint audits and audit quality is stillcontroversial. Then, the main results of empirical research on joint audit are focused. A clear po...