WorldWideScience

Sample records for research investigates structural

  1. An Investigation of the Intellectual Structure of Opinion Mining Research

    Science.gov (United States)

    Zhu, Yongjun; Kim, Meen Chul; Chen, Chaomei

    2017-01-01

    Introduction: Opinion mining has been receiving increasing attention from a broad range of scientific communities since early 2000s. The present study aims to systematically investigate the intellectual structure of opinion mining research. Method: Using topic search, citation expansion, and patent search, we collected 5,596 bibliographic records…

  2. Investigating Move Structure of English Applied Linguistics Research Article Discussions Published in International and Thai Journals

    Science.gov (United States)

    Amnuai, Wirada; Wannaruk, Anchalee

    2013-01-01

    This study investigates the rhetorical move structure of English applied linguistic research article Discussions published in Thai and international journals. Two corpora comprising of 30 Thai Discussions and 30 international Discussions were analyzed using Yang & Allison's (2003) move model. Based on the analysis, both similarities and…

  3. Investigating Research Streams of Conjoint Analysis: A Bibliometric Study

    Directory of Open Access Journals (Sweden)

    Thorsten Teichert

    2010-05-01

    Full Text Available Conjoint analysis (CA is one of the most important methods for preference elicitation. In this paper we investigate the intellectual structure within the conjoint analytical research community. Analyses based on single papers provide a method-based overview of streams of conjoint research. By using novel bibliometric techniques in this field we complement findings of existing reviews. We use co-citation and factor analysis of the most cited articles in SSCI to identify the most important articles and research streams. Seven research streams are revealed which are visualized by means of multidimensional scaling. Tables and graphics reveal the disciplinary affiliations of contributors to CA, the special structure within the classes as well as links between them.

  4. Rhetorical Structure of Education Research Article Methods Sections

    Science.gov (United States)

    Zhang, Baoya; Wannaruk, Anchalee

    2016-01-01

    This study investigated the rhetorical move structure of the education research article genre within the framework of Swales' (1981, 1990, 2004) move analysis. A corpus of 120 systematically sampled empirical education research articles served as data input for the analysis. The results indicate that the education research article methods section…

  5. A cross-cultural investigation into the dimensional structure and stability of the Barriers to Research and Utilization Scale (BARRIERS Scale).

    Science.gov (United States)

    Williams, Brett; Brown, Ted; Costello, Shane

    2015-10-24

    It is important that scales exhibit strong measurement properties including those related to the investigation of issues that impact evidence-based practice. The validity of the Barriers to Research Utilization Scale (BARRIERS Scale) has recently been questioned in a systematic review. This study investigated the dimensional structure and stability of the 28 item BARRIERS Scale when completed by three groups of participants from three different cross-cultural environments. Data from the BARRIERS Scale completed by 696 occupational therapists from Australia (n = 137), Taiwan (n = 413), and the United Kingdom (n = 144) were analysed using principal components analysis, followed by Procrustes Transformation. Poorly fitting items were identified by low communalities, cross-loading, and theoretically inconsistent primary loadings, and were systematically removed until good fit was achieved. The cross-cultural stability of the component structure of the BARRIERS Scale was examined. A four component, 19 item version of the BARRIERS Scale emerged that demonstrated an improved dimensional fit and stability across the three participant groups. The resulting four components were consistent with the BARRIERS Scale as originally conceptualised. Findings from the study suggest that the four component, 19 item version of the BARRIERS Scale is a robust and valid measure for identifying barriers to research utilization for occupational therapists in paediatric health care settings across Australia, United Kingdom, and Taiwan. The four component 19 item version of the BARRIERS Scale exhibited good dimensional structure, internal consistency, and stability.

  6. Seismic structural fragility investigation for the Zion Nuclear Power Plant. Seismic safety margins research program (phase 1)

    International Nuclear Information System (INIS)

    Wesley, D.A.; Hashimoto, P.S.

    1981-10-01

    An evaluation of the seismic capacity of the essential structures for the Zion Nuclear Power Plant in Zion, Illinois, was conducted as part of the Seismic Safety Margins Research Program (SSMRP). The structures included the reactor containment building, the turbine/auxiliary building, and the crib house (intake structure). The evaluation was devoted to seismically induced failures rather than those resulting from combined Loss of Coolant Accident (LOCA) or other extreme load combinations. The seismic loads used in the investigation were based on elastic analyses. The loads for the reactor containment and turbine/auxiliary buildings were developed by Lawrence Livermore Laboratory using time history analyses. The loads used for the crib house were the original seismic design loads developed by Sargent and Lundy. No non-linear seismic analyses were conducted. The seismic capacity of the structures accounted for the actual concrete and steel material properties including the aging of the concrete. Median centered properties were used throughout the evaluation including levels of damping considered appropriate for structures close to collapse as compared to the more conservative values used for design. The inelastic effects were accounted for using ductility modified response spectrum techniques based on system ductility ratios expected for structures near collapse. Sources of both inherent randomness and uncertainties resulting from lack of knowledge or approximations in analytical modelling were considered in developing the dispersion of the structural dynamic characteristics. Coefficients of variation were developed assuming lognormal distributions for all variables. The earthquake levels for many of the seismically induced failure modes are so high as to be considered physically incredible. (author)

  7. Investigation of optical properties of Ag: PMMA nanocomposite structures

    Science.gov (United States)

    Ponelyte, S.; Palevicius, A.; Guobiene, A.; Puiso, J.; Prosycevas, I.

    2010-05-01

    In the recent years fundamental research involving the nanodimensional materials has received enormous momentum for observing and understanding new types of plasmonic materials and their physical phenomena occurring in the nanoscale. Mechanical and optical properties of these polymer based nanocomposite structures depend not only on type, dimensions and concentration of filler material, but also on a kind of polymer matrix used. By proper selection of polymer matrix and nanofillers, it is possible to engineer nanocomposite materials with certain favorable properties. One of the most striking features of nanocomposite materials is that they can expose unique optical properties that are not intrinsic to natural materials. In these researches, nanocomposite structures were formed using polymer (PMMA) as a matrix, and silver nanoparticles as fillers. By hot embossing procedure a diffraction grating was imprinted on formed layers. The effect of UV exposure time on nanocomposite structures morphology, optical (diffraction effectiveness, absorbance) and mechanical properties was investigated. Results were confirmed by UV-VIS spectrometer, Laser Diffractometer, PMT- 3 and AFM. Investigations proposed new nanocomposite structures as plasmonic materials with improved optical and mechanical properties, which may be applied for a number of technological applications: micro-electro-mechanical devices, optical devices, various plasmonic sensors, or even in DNA nanotechnology.

  8. Investigational research on eco-smart engines; Eco-smart engine no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper investigated the trend of research on eco-smart engines into which optimization function of engine performance, high environmental-adaptability, etc. are integrated. The investigation was made in Japan and abroad on technologies of combustion, structure/material, control, design/analysis, systematization, etc. In case of Japan, specifications were established for three types of engines, subsonic, supersonic and hypersonic aircraft, and the research subjects to fulfil the specifications were extracted. In case of the U.S. and Europe, the survey was made of combustion, materials, noise, design concept, control, etc. Important subjects are selected in priority order. Namely, for the enhancement of efficiency, the following were taken up: three-dimensional fiber-reinforced large-size light-weight structure application technology, heat-resistant advanced-material structure damage-tolerant design technology, pseudo-vesicular structure transpiration cooling technology, etc. For the reduction of NOx emission, the paper took up technologies of environmentally optimization combustion, AI combustion control, and non-cooling combustor liner application. For the noise reduction, technologies of new inclination hole orientation noise absorbing structure material application, super noise control, and innovative CFD utilization low noise aerodynamics. Moreover, the results of fiscal 1997 were outlined to indicate the research in the next fiscal year. 14 figs., 10 tabs.

  9. Faculty research productivity and organizational structure in schools of nursing.

    Science.gov (United States)

    Kohlenberg, E M

    1992-01-01

    The purpose of this study was to identify the relationship between faculty research productivity and organizational structure in schools of nursing. The need for nursing research has been widely recognized by members of the nursing profession, yet comparatively few engage in conducting research. Although contextual variables have been investigated that facilitate or inhibit nursing research, the relationship between organizational structure and nursing research productivity has not been examined. This problem was examined within the context of the Entrepreneurial Theory of Formal Organizations. A survey methodology was used for data collection. Data on individual faculty research productivity and organizational structure in the school of nursing were obtained through the use of a questionnaire. A random sample of 300 faculty teaching in 60 master's and doctoral nursing schools in the United States was used. The instruments for data collection were Wakefield-Fisher's Adapted Scholarly Productivity Index and Hall's Organizational Inventory. The data were analyzed using Pearson Product-Moment Correlation Coefficients and multiple correlation/regression techniques. The overall relationship between faculty research productivity and organizational structure in schools of nursing was not significant at the .002 level of confidence. Although statistically significant relationships were not identified, scholarly research productivity and its subscale prepublication and research activities tended to vary positively with procedural specifications in a highly bureaucratic organizational structure. Further research may focus on identification of structural variables that support highly productive nurse researchers.

  10. Key Problems in Organizing and Structuring University Research in Vietnam: The Lack of an Effective Research "Behaviour Formalization" System

    Science.gov (United States)

    Nguyen, Huong Thi Lan; Meek, Vincent Lynn

    2016-01-01

    Structure and organization seems to be at the root of many of the questions raised about institutional behaviour; however, with respect to research on university capacity building, few studies have examined research organizational problems, particularly in developing countries. This study investigates academic reactions to the structure and…

  11. Neutron scattering investigations of the lipid bilayer structure pressure dependence

    International Nuclear Information System (INIS)

    Solovjov, D.V.; Gordelyij, V.Yi.; Gorshkova, Yu.Je.; Yivan'kov, O.Yi.; Koval'ov, Yu.S.; Kuklyin, A.Yi.; Solovjov, D.V.; Bulavyin, L.A.; Yivan'kov, O.Yi.; Nyikolajenko, T.Yu.; Kuklyin, A.Yi.; Gordelyij, V.Yi.; Gordelyij, V.Yi.

    2012-01-01

    Lipid bilayer structure investigation results obtained with small angle neutron scattering method at the Joint Institute for Nuclear Research IBR-2M nuclear reactor (Dubna, Russia) are presented. Experiment has been performed with small angle neutron scattering spectrometer YuMO, upgraded with the apparatus for performing PV-T measurements on the substance under investigation. D 2 O-1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) liquid system, presenting the model of natural live membrane, has been taken as the sample for investigations. The lipid bilayer spatial period was measured in experiment along with isothermal compressibility simultaneously at different pressures. It has been shown, that the bilayer structural transition from ripple (wavelike gel-phase) phase to liquid-crystal phase is accompanied with anomalous rise of isothermal compressibility, indicating occurrence of the phase transition.

  12. Synchrotron light techniques for the investigation of advanced nuclear reactor structural materials

    International Nuclear Information System (INIS)

    Pouchon, M.A.; Froideval, A.; Degueldre, C.; Gavillet, D.; Hoffelner, W.

    2008-01-01

    In the frame of the Generation IV initiative, different structural material candidates are investigated at the Paul Scherrer Institute. These are oxide dispersion strengthened (ODS) steels, intermetallic materials and ceramic composite materials. The response of the material to different potential loads (irradiation, temperature...) is addressed in a multi-scale approach, both, modelling wise and also experimentally. The investigation of each scale delivers at least a qualitative understanding of possibly evolving damage in the material and also delivers a validation of the corresponding scale on the modelling side. From the experimental side, the lower end of the scale, the atomistic and structural level, can be investigated by conventional techniques, as for example transmission electron microscopy (TEM) and X-ray diffraction (XRD). However, the use of synchrotron radiation techniques offers an ideal, complementary way to investigate the material structure and other properties. This paper presents applications in the field of the ODS research, where the structural behaviour of the nano-scopic dispersoids can selectively be investigated, although only being present with roughly 5 wt % in the matrix. A study showing the structural behaviour of these oxide particles as a function of irradiation illustrates the potential of the extended X-ray absorption fine structure (EXAFS) technique. Using X-ray magnetic circular dichroism (XMCD), which is a difference-signal of two X-ray absorption spectra recorded for positive and negative helicities of the beam, the magnetic structure and some magnetic parameters, can be resolved. An example shows, how this can be applied to understand (Fe,Cr) systems, which is the base alloy of the investigated ODS steel. The results deliver an important cross-check for modelling. Beside the presentation of these techniques, this paper shows how beamline techniques can serve nuclear research, with possibly activated materials. At the Paul

  13. Horonobe underground research program. Research report of 2002 FY investigation

    International Nuclear Information System (INIS)

    2003-06-01

    Main results of investigation about Horonobe deep underground research center in 2002 FY were reported. It consists of six chapters: introduction, main results, selection of research center area, underground science research, R and D of geological disposal, and the environmental survey and research center on the ground. The research center area at about 3 km north of Horonobe (B1) was selected in the four areas: A, B1, B2 and C on the basis of data, researches in the sky, aboveground and underground and other conditions. The model of geological environment was constructed by physical, geological, surface water supply researches. Development of geological environment monitoring techniques, investigation of long stabilization of geological environment and design of underground facilities are reported. The basic design of preparation of research center was investigated. (S.Y.)

  14. Research of chemical structure of atmospheric precipitation

    International Nuclear Information System (INIS)

    Korenyak, D.

    2001-01-01

    The structure of atmospheric precipitation changes in its passing through the air medium. Thus, the atmospheric precipitation is one of the ecological factors, acting regularly. The research of chemical structure of atmospheric precipitation is closely connected with the problems of turnover of elements, with sanitary - ecological conditions of regions, with the matters of agricultural equipment and of salt balance of the soils. In paper the author for the first time represents the data on chemical structure of precipitation in the town. The data of chemical analysis of 18 samples are given. Obtained results permitted, to a certain extent, to determine the mechanisms of formation of atmospheric precipitation in the region investigated and its genesis. (authors)

  15. [Support Team for Investigator-Initiated Clinical Research].

    Science.gov (United States)

    Fujii, Hisako

    2017-07-01

    Investigator-initiated clinical research is that in which investigators plan and carry out their own clinical research in academia. For large-scale clinical research, a team should be organized and implemented. This team should include investigators and supporting staff, who will promote smooth research performance by fulfilling their respective roles. The supporting staff should include project managers, administrative personnel, billing personnel, data managers, and clinical research coordinators. In this article, I will present the current status of clinical research support and introduce the research organization of the Dominantly Inherited Alzheimer Network (DIAN) study, an investigator-initiated international clinical research study, with particular emphasis on the role of the project management staff and clinical research coordinators.

  16. An investigation on fatigue in high-strength steel offshore structures

    DEFF Research Database (Denmark)

    Agerskov, Henning; Petersen, R.I.; Martinez, L. Lopez

    1998-01-01

    of the investigation, fatigue test series were carried out on both full scale tubular joints and smaller welded plate test specimens in high-strength steel as well as in conventional offshore structural steel. This paper gives a summary of the main results presented in two recent research reports [15, 16], from...... these investigations. A comparison between constant amplitude and variable amplitude fatigue test results shows shorter fatigue lives in variable amplitude loading than should be expected from the linear fatigue damage accumulation formula.Furthermore, in general longer fatigue lives were obtained for the test...... specimens in high-strength steel than those obtained in corresponding tests on joints in conventional offshore structural steel....

  17. Neutron scattering investigations of the lipid bilayer structure pressure dependence

    Directory of Open Access Journals (Sweden)

    D. V. Soloviov

    2012-03-01

    Full Text Available Lipid bilayer structure investigation results obtained with small angle neutron scattering method at the Joint Institute for Nuclear Research IBR-2M nuclear reactor (Dubna, Russia are presented. Experiment has been per-formed with small angle neutron scattering spectrometer YuMO, upgraded with the apparatus for performing P-V-T measurements on the substance under investigation. D2O-1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC liquid system, presenting the model of natural live membrane, has been taken as the sample for investiga-tions. The lipid bilayer spatial period was measured in experiment along with isothermal compressibility simulta-neously at different pressures. It has been shown, that the bilayer structural transition from ripple (wavelike gel-phase phase to liquid-crystal phase is accompanied with anomalous rise of isothermal compressibility, indicat-ing occurrence of the phase transition.

  18. THE INTELLECTUAL STRUCTURE OF ONLINE SHOPPING RESEARCH: AUTHOR CO-CITATION ANALYSIS

    Directory of Open Access Journals (Sweden)

    Wann-Yih Wu

    2016-06-01

    Full Text Available This study was conducted to investigate the intellectual structure of the online shopping field in the last decade using co-citation analysis. The citations were obtained from the database of WOS (World of Science, and articles (authors were used as the units of analysis. Based on the results, this research revealed the main categories in the field of online shopping and the relationships between the subfields of research subjects and among authors and identified the authors who play a central role in the conceptual domains of online shopping. This research outlines the intellectual structure of the field of online shopping and its development trends. It also provides details about the influence of individual authors and the evolving structure of this research field over time.

  19. Nuclear Structure Research at TRIUMF

    Science.gov (United States)

    Garrett, P. E.; Andreyev, A.; Austin, R. A. E.; Ball, G. C.; Bandyopadhyay, D.; Becker, J. A.; Boston, A. J.; Chakrawarthy, R. S.; Cline, D.; Cooper, R. J.; Churchman, R.; Cross, D.; Dashdorj, D.; Demand, G. A.; Dimmock, M. R.; Drake, T. E.; Finlay, P.; Gagon-Miosan, F.; Gallant, A. T.; Green, K. L.; Grint, A. N.; Grinyer, G. F.; Hackman, G.; Harkness, L. J.; Hayes, A. B.; Kanungo, R.; Kulp, W. D.; Leach, K. G.; Lee, G.; Leslie, J. R.; Martin, J.-P.; Mattoon, C.; Mills, W. J.; Morton, A. C.; Mythili, S.; Nelson, L.; Newman, O.; Nolan, P. J.; Padilla-Rodal, E.; Pearson, C. J.; Phillips, A. A.; Porter-Peden, M.; Ressler, J. J.; Roy, R.; Ruiz, C.; Savajols, H.; Sarazin, F.; Schumaker, M. A.; Scraggs, D. P.; Scraggs, H. C.; Strange, M. D.; Svensson, C. E.; Waddington, J. C.; Wan, J. M.; Whitbeck, A.; Williams, S. J.; Wong, J.; Wood, J. L.; Wu, C. Y.; Zganjar, E. F.

    2007-04-01

    The radioactive beam laboratory at TRIUMF is currently the highest power ISOL facility in the world. Taking advantage of the high-intensity beams, major programs in nuclear astrophysics, nuclear structure, and weak interaction studies have begun. The low-energy area, ISAC-I, is capable of delivering beams up to mass 30 at approx 1.7 MeV/u or 60 keV up to the mass of the primary target, whereas ISAC-II will ultimately provide beams up to mass 150 and approx 6.5 MeV/u. Major gamma -ray spectrometers for nuclear structure research consist of the 8pi spectrometer at ISAC-I, and the TIGRESS spectrometer now being constructed for ISAC-II. Results from recent experiments investigating the beta -decay of nuclei near N=90 and Coulomb excitation of 20,21Na are presented that highlight the capabilities of the spectrometers.

  20. An Investigation on Fatigue in High-Strength Steel Offshore Structures

    DEFF Research Database (Denmark)

    Agerskov, Henning; Petersen, R.I.; Lopez Martinez, L.

    1997-01-01

    . In the experimental part of the investigation, fatigue test series have been carried through on both full-scale tubular joints and smaller welded plate test specimens, in high-strength steel as well as in conventional offshore structural steel. The present document gives a summary of the main results presented in two...... recent research reports, Refs. 15 and 16, from these investigations.A comparison between constant amplitude and variable amplitude fatigue test results shows shorter fatigue lives in variable amplitude loading than should be expected from the linear fatigue damage accumulation formula. Furthermore......, in general longer fatigue lives were obtained for the test specimens in high-strength steel than those obtained in corresponding tests on joints in conventional offshore structural steel....

  1. Investigation on the structure of liquid N-methylformamide-dimethylsulfoxide mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Cordeiro, Joao M.M., E-mail: cordeiro@dfq.feis.unesp.br [ISIS Facility, STFC Rutherford Appleton Laboratory, Harwell Science and Innovation Campus, Didcot, Oxon OX11 0QX (United Kingdom); Soper, Alan K. [ISIS Facility, STFC Rutherford Appleton Laboratory, Harwell Science and Innovation Campus, Didcot, Oxon OX11 0QX (United Kingdom)

    2011-03-18

    Graphical abstract: Structure of liquid NMF and DMSO mixtures investigated using a combination of neutron diffraction techniques augmented with isotopic substitution and empirical potential structure refinement simulations. Research highlights: {yields} NMF-DMSO mixture is a well-structured liquid. {yields} The liquid structure is driven by strong hydrogen bonds. {yields} There is a preference for NMF-DMSO hydrogen bonding compared to the NMF-NMF. {yields} There are very stable NMF-DMSO dimers dispersed through the liquid. {yields} The peptide structure is very well solvated in DMSO. - Abstract: The structures of liquid mixtures of N-methylformamide (NMF) and dimethyl sulfoxide (DMSO) at two concentrations (80% and 50% NMF) are investigated using a combination of neutron diffraction augmented with isotopic substitution and empirical potential structure refinement simulations. The results indicate that the NMF and DMSO molecules are hydrogen-bonded to one another with a preference for NMF-DMSO hydrogen bonding, compared to the NMF-NMF ones. The liquid is orientationally structured as a consequence of these hydrogen bonds between molecules. NMF-DMSO dimers are very stable species in the bulk of the mixture. The structure of the dimers is such that the angle between the molecular dipole moments is around 60{sup o}. The NMF molecules are well solvated in DMSO with potential implications for peptides solvation in this solvent.

  2. Investigation on the structure of liquid N-methylformamide-dimethylsulfoxide mixtures

    International Nuclear Information System (INIS)

    Cordeiro, Joao M.M.; Soper, Alan K.

    2011-01-01

    Graphical abstract: Structure of liquid NMF and DMSO mixtures investigated using a combination of neutron diffraction techniques augmented with isotopic substitution and empirical potential structure refinement simulations. Research highlights: → NMF-DMSO mixture is a well-structured liquid. → The liquid structure is driven by strong hydrogen bonds. → There is a preference for NMF-DMSO hydrogen bonding compared to the NMF-NMF. → There are very stable NMF-DMSO dimers dispersed through the liquid. → The peptide structure is very well solvated in DMSO. - Abstract: The structures of liquid mixtures of N-methylformamide (NMF) and dimethyl sulfoxide (DMSO) at two concentrations (80% and 50% NMF) are investigated using a combination of neutron diffraction augmented with isotopic substitution and empirical potential structure refinement simulations. The results indicate that the NMF and DMSO molecules are hydrogen-bonded to one another with a preference for NMF-DMSO hydrogen bonding, compared to the NMF-NMF ones. The liquid is orientationally structured as a consequence of these hydrogen bonds between molecules. NMF-DMSO dimers are very stable species in the bulk of the mixture. The structure of the dimers is such that the angle between the molecular dipole moments is around 60 o . The NMF molecules are well solvated in DMSO with potential implications for peptides solvation in this solvent.

  3. Study on the Geological Structure around KURT Using a Deep Borehole Investigation

    International Nuclear Information System (INIS)

    Park, Kyung Woo; Kim, Kyung Su; Koh, Yong Kwon; Choi, Jong Won

    2010-01-01

    To characterize geological features in study area for high-level radioactive waste disposal research, KAERI (Korea Atomic Energy Research Institute) has been performing the several geological investigations such as geophysical surveys and borehole drilling since 1997. Especially, the KURT (KAERI Underground Research Tunnel) constructed to understand the deep geological environments in 2006. Recently, the deep borehole of 500 m depths was drilled to confirm and validate the geological model at the left research module of the KURT. The objective of this research was to identify the geological structures around KURT using the data obtained from the deep borehole investigation. To achieve the purpose, several geological investigations such as geophysical and borehole fracture surveys were carried out simultaneously. As a result, 7 fracture zones were identified in deep borehole located in the KURT. As one of important parts of site characterization on KURT area, the results will be used to revise the geological model of the study area

  4. Design and 4D Printing of Cross-Folded Origami Structures: A Preliminary Investigation

    Directory of Open Access Journals (Sweden)

    Joanne Ee Mei Teoh

    2018-03-01

    Full Text Available In 4D printing research, different types of complex structure folding and unfolding have been investigated. However, research on cross-folding of origami structures (defined as a folding structure with at least two overlapping folds has not been reported. This research focuses on the investigation of cross-folding structures using multi-material components along different axes and different horizontal hinge thickness with single homogeneous material. Tensile tests were conducted to determine the impact of multi-material components and horizontal hinge thickness. In the case of multi-material structures, the hybrid material composition has a significant impact on the overall maximum strain and Young’s modulus properties. In the case of single material structures, the shape recovery speed is inversely proportional to the horizontal hinge thickness, while the flexural or bending strength is proportional to the horizontal hinge thickness. A hinge with a thickness of 0.5 mm could be folded three times prior to fracture whilst a hinge with a thickness of 0.3 mm could be folded only once prior to fracture. A hinge with a thickness of 0.1 mm could not even be folded without cracking. The introduction of a physical hole in the center of the folding/unfolding line provided stress relief and prevented fracture. A complex flower petal shape was used to successfully demonstrate the implementation of overlapping and non-overlapping folding lines using both single material segments and multi-material segments. Design guidelines for establishing cross-folding structures using multi-material components along different axes and different horizontal hinge thicknesses with single or homogeneous material were established. These guidelines can be used to design and implement complex origami structures with overlapping and non-overlapping folding lines. Combined overlapping folding structures could be implemented and allocating specific hole locations in the overall

  5. Design and 4D Printing of Cross-Folded Origami Structures: A Preliminary Investigation.

    Science.gov (United States)

    Teoh, Joanne Ee Mei; An, Jia; Feng, Xiaofan; Zhao, Yue; Chua, Chee Kai; Liu, Yong

    2018-03-03

    In 4D printing research, different types of complex structure folding and unfolding have been investigated. However, research on cross-folding of origami structures (defined as a folding structure with at least two overlapping folds) has not been reported. This research focuses on the investigation of cross-folding structures using multi-material components along different axes and different horizontal hinge thickness with single homogeneous material. Tensile tests were conducted to determine the impact of multi-material components and horizontal hinge thickness. In the case of multi-material structures, the hybrid material composition has a significant impact on the overall maximum strain and Young's modulus properties. In the case of single material structures, the shape recovery speed is inversely proportional to the horizontal hinge thickness, while the flexural or bending strength is proportional to the horizontal hinge thickness. A hinge with a thickness of 0.5 mm could be folded three times prior to fracture whilst a hinge with a thickness of 0.3 mm could be folded only once prior to fracture. A hinge with a thickness of 0.1 mm could not even be folded without cracking. The introduction of a physical hole in the center of the folding/unfolding line provided stress relief and prevented fracture. A complex flower petal shape was used to successfully demonstrate the implementation of overlapping and non-overlapping folding lines using both single material segments and multi-material segments. Design guidelines for establishing cross-folding structures using multi-material components along different axes and different horizontal hinge thicknesses with single or homogeneous material were established. These guidelines can be used to design and implement complex origami structures with overlapping and non-overlapping folding lines. Combined overlapping folding structures could be implemented and allocating specific hole locations in the overall designs could be

  6. Design and 4D Printing of Cross-Folded Origami Structures: A Preliminary Investigation

    Science.gov (United States)

    Teoh, Joanne Ee Mei; Feng, Xiaofan; Zhao, Yue; Liu, Yong

    2018-01-01

    In 4D printing research, different types of complex structure folding and unfolding have been investigated. However, research on cross-folding of origami structures (defined as a folding structure with at least two overlapping folds) has not been reported. This research focuses on the investigation of cross-folding structures using multi-material components along different axes and different horizontal hinge thickness with single homogeneous material. Tensile tests were conducted to determine the impact of multi-material components and horizontal hinge thickness. In the case of multi-material structures, the hybrid material composition has a significant impact on the overall maximum strain and Young’s modulus properties. In the case of single material structures, the shape recovery speed is inversely proportional to the horizontal hinge thickness, while the flexural or bending strength is proportional to the horizontal hinge thickness. A hinge with a thickness of 0.5 mm could be folded three times prior to fracture whilst a hinge with a thickness of 0.3 mm could be folded only once prior to fracture. A hinge with a thickness of 0.1 mm could not even be folded without cracking. The introduction of a physical hole in the center of the folding/unfolding line provided stress relief and prevented fracture. A complex flower petal shape was used to successfully demonstrate the implementation of overlapping and non-overlapping folding lines using both single material segments and multi-material segments. Design guidelines for establishing cross-folding structures using multi-material components along different axes and different horizontal hinge thicknesses with single or homogeneous material were established. These guidelines can be used to design and implement complex origami structures with overlapping and non-overlapping folding lines. Combined overlapping folding structures could be implemented and allocating specific hole locations in the overall designs could be

  7. EPRI research on soil-structure interaction

    International Nuclear Information System (INIS)

    Tang, H.T.

    1986-01-01

    The paper briefly discusses the background of soil-structure interaction research and identifies the nuclear industry's need for a realistic, experimentally qualified soil-structure interaction analysis methodology for nuclear power plant design to reduce excessive conservatism and stabilize the licensing process. EPRI research and joint research efforts between EPRI and Niagara Mohawk Power Corporation, Taiwan Power Company, and the Japanese Century Research Institute for Electric Power Industry are outlined. As a result of these and other research efforts, improvement in soil-structure interactions methodologies is being realized

  8. Structural Investigations of Complex Oxides using Synchrotron Radiation

    International Nuclear Information System (INIS)

    Hans-Conrad zur Loye

    2007-01-01

    The work is a collaborative effort between Prof. Hanno zur Loye at the University of South Carolina and Dr. Tom Vogt at Brookhaven National Laboratory. The collaborative research focuses on the synthesis and the structural characterization of perovskites and perovskite related oxides and will target new oxide systems where we have demonstrated expertise in synthesis, yet lack the experimental capabilities to answer important structural issues. Synthetically, we will focus on two subgroups of perovskite structures, the double and triple perovskites, and the 2H-perovskite related oxides belonging to the A 3n+3m A(prime) 3M+n B 3m+n O 9m+6n family. In the first part of the proposal, our goal of synthesizing and structurally characterizing new ruthenium, iridium, rhodium and ruthenium containing double and triple perovskites, with the emphasis on exercising control over the oxidation state(s) of the metals, is described. These oxides will be of interest for their electronic and magnetic properties that will be investigated as well

  9. The Structure of Mixed Method Studies in Educational Research: A Content Analysis

    Science.gov (United States)

    Bryant, Lauren H.

    2011-01-01

    Educational researchers are beginning to use mixed methods designs to answer complex research questions. This content analysis investigates the structure and use of mixed methods in educational research in order to work toward a more standardized presentation. I used a concurrent mixed methods approach to analyze 30 studies from three prominent…

  10. An investigation of structural design methodology for HTGR reactor internals with ceramic materials (Contract research)

    International Nuclear Information System (INIS)

    Sumita, Junya; Shibata, Taiju; Nakagawa, Shigeaki; Iyoku, Tatsuo; Sawa, Kazuhiro

    2008-03-01

    To advance the performance and safety of HTGR, heat-resistant ceramic materials are expected to be used as reactor internals of HTGR. C/C composite and superplastic zirconia are the promising materials for this purpose. In order to use these new materials as reactor internals in HTGR, it is necessary to establish a structure design method to guarantee the structural integrity under environmental and load conditions. Therefore, C/C composite expected as reactor internals of VHTR is focused and an investigation on the structural design method applicable to the C/C composite and a basic applicability of the C/C composite to representative structures of HTGR were carried out in this report. As the results, it is found that the competing risk theory for the strength evaluation of the C/C composite is applicable to design method and C/C composite is expected to be used as reactor internals of HTGR. (author)

  11. Dye-sensitized solar cells: Atomic scale investigation of interface structure and dynamics

    International Nuclear Information System (INIS)

    Ma Wei; Zhang Fan; Meng Sheng

    2014-01-01

    Recent progress in dye-sensitized solar cells (DSC) research is reviewed, focusing on atomic-scale investigations of the interface electronic structures and dynamical processes, including the structure of dye adsorption onto TiO 2 , ultrafast electron injection, hot-electron injection, multiple-exciton generation, and electron—hole recombination. Advanced experimental techniques and theoretical approaches are briefly summarized, and then progressive achievements in photovoltaic device optimization based on insights from atomic scale investigations are introduced. Finally, some challenges and opportunities for further improvement of dye solar cells are presented. (invited review — international conference on nanoscience and technology, china 2013)

  12. Investigational research on the design of computational materials; Keisanki zairyo sekkei no chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Computer chemistry was investigationally studied. The advance of theoretical chemistry is indispensable to the design of materials, and the theory and high speed computational method are expected which can simulate the real system with more accuracy. It is basic to simulate structures and physical properties of structural molecules and the aggregate, but the meso region, the intermedium region between structural molecules and the aggregate, has became regarded as important. Rough visualization models in high polymer materials and the progress of computational software/hardware of quantum chemistry/molecular dynamics such as catalyst become necessary. Seamless zooming is proposed as a concept of the software which simulates materials from micro/macro/meso viewpoints. Moreover, to make the most of computer chemistry, an integrated system is necessary which generally handles computational software, database, etc. For the development of software, indispensable is the demonstrative verification by a combination of experiments and researchers. Under a commission from NEDO, the investigational research was conducted as a leading study during fiscal 1996 and 1997 to view the course of the research. 17 refs., 37 figs., 5 tabs.

  13. Structural materials performance research at JRC-Institute for Energy

    International Nuclear Information System (INIS)

    Haehner, P.

    2009-01-01

    The DG-JRC structure and activities are presented in the paper. The Generation IV reactor concepts Very High Temperature Reactor (VHTR), Supercritical Water Reactor (SCWR) and Lead Cooled Reactor (LCR) are currently under study at the JRC. Requirements for innovative nuclear systems and material-related operational condition are under investigation. Considering the operational experience with current nuclear industry, these conditions imply demanding challenges from the structural materials point of view. The European Projects and initiatives and coordinated research programs are also presented

  14. The research of suspen-dome structure

    Science.gov (United States)

    Gong, Shengyuan

    2017-09-01

    After overcoming the shortcomings of single-layer latticed shell and cable dome structure, the suspen-dome was developed by inheriting the advantages of them, and it was recognized and applied as a new type of prestressed force large span space structure. Based on the analysis of the background and mechanical principle, the researches of suspen-dome are reviewed, including form-finding analysis, the analysis of static force and stability, the dynamic behaviors and the earthquake resistant behavior, the analysis of prestressing force and optimization design, and the research status of the design of the fir-resistant performance etc. This thesis summarizes the methods of various researches, being a reference for further structural performance research and structural engineering application.

  15. European Research in Marine Structures

    DEFF Research Database (Denmark)

    Soares, C.Guedes; Jensen, Jørgen Juncher; Incecik, A.

    2012-01-01

    An overview is presented of the results obtained in Europe by a network with a large number of research groups in the field of Marine Structures during a period of 6 years. The European Union has funded a project aimed at improving the collaboration among European research groups specialized...... in marine structures, which has led, among other results to a number of benchmark studies organized in 6 main topical areas, namely, Methods and Tools for Loads and Load Effects, Methods and Tools for Strength Assessment, Experimental Analysis of Structures, Materials and Fabrication of Structures, Methods...... and Tools for Structural Design and Optimization and Structural Reliability, Safety and Environmental Protection. This paper presents an overview of various studies performed, which helps identifying the level of consistency and robustness of different numeric tools used in this field....

  16. The Investigation of Structure Heterogeneous Joint Welds in Pipelines

    Directory of Open Access Journals (Sweden)

    Lyubimova Lyudmila

    2016-01-01

    Full Text Available Welding joints of dissimilar steels don’t withstand design life. One of the important causes of premature destructions can be the acceleration of steel structural degradation due to cyclic mechanical and thermal gradients. Two zones of tube from steel 12H18N9T, exhibiting the structural instability at early stages of the decomposition of a supersaturated solid austenite solution, were subjected to investigation. Methods of x-ray spectral and structure analysis, micro hardnessmetry were applied for the research. Made the following conclusions, inside and outside tube wall surfaces of hazardous zones in welding joint have different technological and resource characteristics. The microhardness very sensitive to changes of metal structure and can be regarded as integral characteristic of strength and ductility. The welding processes are responsible for the further fibering of tube wall structure, they impact to the characteristics of hot-resistance and long-term strength due to development of ring cracks in the welding joint of pipeline. The monitoring of microhardness and structural phase conversions can be used for control by changes of mechanical properties in result of post welding and reductive heat treatment of welding joints.

  17. EXPERIMENTAL RESEARCH CONCERNING THE OPTIMAL DIMENSIONS OF AN ELASTIC STRUCTURE OF BEECH WOOD PARQUET

    Directory of Open Access Journals (Sweden)

    Olimpia-Minerva ȚURCAȘ (DIACONU

    2015-12-01

    Full Text Available This paper presents the results of the experimental research concerning the modulus of elasticity and the average value of the bending strength in case of beech (Fagus sylvatica L. wood. The investigations were performed according to SR EN 408-2004. The results of the research have been analysed in order to establish the variable parameters to be considered for the final experimental research focused on beech wood floor structures that meet the necessary requirements for the sports halls applications. The research presented in the paper is a part of the study theme of the Ph. D. thesis, which investigates the flooring structures able to support the requirements of sports halls activities, different from one sport to another.

  18. An empirical investigation of governance structures in the hotel industry

    OpenAIRE

    Dahlstrom, Robert; Haugland, Sven Arne; Nygaard, Arne; Rokkan, Aksel Ivar

    2002-01-01

    The study investigates alternative governance forms in the hotel industry. We analyze the choice among independently owned firms, voluntary chains, franchising, and vertically integrated chains. Based on agency theory, we argue that the need for control over service quality, financial risk, and the market environment affect the choice of governance form. Prior agency research emphasizes alternative governance structures employed by principals given local market conditions, agent incentives, a...

  19. Horonobe Underground Research Laboratory project synthesis of phase I investigation 2001-2005. Volume 'Geological disposal research'

    International Nuclear Information System (INIS)

    Fujita, Tomoo; Taniguchi, Naoki; Tanai, Kenji; Nishimura, Mayuka; Kobayashi, Yasushi; Hiramoto, Masayuki; Maekawa, Keisuke; Sawada, Atsushi; Makino, Hitoshi; Sasamoto, Hiroshi; Yoshikawa, Hideki; Shibata, Masahiro; Wakasugi, Keiichiro; Nakano, Katsushi; Seo, Toshihiro; Miyahara, Kaname; Naito, Morimasa; Yui, Mikazu; Matsui, Hiroya; Kurikami, Hiroshi; Kunimaru, Takanori; Ishii, Eiichi; Ota, Kunio; Hama, Katsuhiro; Takeuchi, Ryuji

    2007-03-01

    This report summarizes the progress of research and development on geological disposal during the surface-based investigation phase (2001-2005) in the Horonobe Underground Research Laboratory project (HOR), of which aims are to apply the design methods of geological disposal and mass transport analysis to actual geological conditions obtained from the surface-based investigations in HOR as an example of actual geological environment. For the first aim, the design methods for the geological disposal facility proposed in 'H12 report (the second progress report)' was reviewed and then improved based on the recent knowledge. The applicability of design for engineered barrier system, backfill of disposal tunnel, underground facility was illustrated. For the second aim, the conceptual structure from site investigation and evaluation to mass transport analysis was developed as a work flow at first. Then following this work flow a series of procedures for mass transport analysis was applied to the actual geological conditions to illustrate the practical workability of the work flow and the applicability of this methodology. Consequently, based on the results, future subjects were derived. (author)

  20. The European structural integrity research programme

    International Nuclear Information System (INIS)

    Townley, C.H.A.; Acker, D.; Laue, H.

    1990-01-01

    A thermal hydraulics evaluation of the European Fast Reactor (EFR) design followed by structural analysis is presented in this article to assess the structural integrity research programme to date. Improved design methods are being achieved as a result of the structural integrity programme for the EFR. Excellent collaboration between the nationally based research organizations and the design and construction companies has been important in achieving these improvements. (UK)

  1. Chief, Structural Biophysics Laboratory | Center for Cancer Research

    Science.gov (United States)

    The SBL Chief is expected to establish a strong research program in structural biology/biophysics in addition to providing leadership of the SBL and the structural biology community in the NCI Intramural Program.  Applicants should hold a Ph.D., M.D./Ph.D., or equivalent doctoral degree in a relevant discipline, and should possess outstanding communication skills and documented leadership experience.  Tenured faculty or industrial scientists of equivalent rank with a demonstrated commitment to structural biophysics should apply.  Salary will be commensurate with experience and accomplishments.  This position is not restricted to U.S. citizens. A full civil service package of benefits (including health insurance, life insurance, and retirement) is available. This position is subject to a background investigation.  The NIH is dedicated to building a diverse community in its training and employment programs.

  2. Research on modulated structure alloys

    International Nuclear Information System (INIS)

    Tsujimoto, Tokuzo; Saito, Kazuo; Hashimoto, Kenki

    1982-01-01

    Research was carried out for the purposes of clarifying the cause of modulated structure formation, developing the structure control method utilizing modulated structure and clarifying the suitability of modulated structure alloys as radiation damage-resisting materials. The research on structure control method encountered a difficulty in the analysis of experimental results, bu the following results were obtained in the other items. The method of solving a diffusion equation including a nonlinear term was found in course of the clarification of the cause of modulated structure formation. As a means of detecting faint unevenness in solid solution, of which the deviation of composition is a few %, the structure analysis method utilizing magnetic property was developed. This method was applied to Ni-9.6 at.% Ti alloy, and the process of expanding amplitude in composition variation in spinodal decomposition and the formation of solute atomshort region at the time of nucleation-growth were confirmed. Utilizing the high energy electron beam generated in a superhigh voltage electron microscope, electron beam irradiation experiment was carried out on precipitation hardening alloys with modulated structure. As the result, it was found that in Ni-Ti alloy, the amount of void swelling resistance showed the change with the increase of modulated structure period. (Kako, I.)

  3. Investigating educational research. A study on dissertations

    Directory of Open Access Journals (Sweden)

    Paulo Marcelo Marini Teixeira

    2006-08-01

    Full Text Available This paper is a brief historical survey on the emergence of educational research in Brazil, namely the rise and development of Science Education research, with special focus on research developed in Education and Science Education graduate programs. It highlights the relevance of the so-called ‘state-of-the-art” studies as a category of investigation that is fundamental for analytical studies on production in a given field of research, and addresses basic procedures to be carried out in investigations of this nature. Finally, this paper presents some trends in Biology Education research in Brazil as shown in Brazilian dissertations and theses produced between 1972 and 2003.

  4. Investigation of knowledge structure of nuclear data evaluation code

    International Nuclear Information System (INIS)

    Uenaka, Junji; Kambayashi, Shaw

    1988-08-01

    In this report, investigation results of knowledge structure in a nuclear data evaluation code are described. This investigation is related to the natural language processing and the knowledge base in the research theme of Human Acts Simulation Program (HASP) begun at the Computing Center of JAERI in 1987. By using a machine translation system, an attempt has been made to extract a deep knowledge from Japanese sentences which are equivalent to a FORTRAN program CASTHY for nuclear data evaluation. With the knowledge extraction method used by the authors, the verification of knowledge is more difficult than that of the prototyping method in an ordinary AI technique. In the early stage of building up a knowledge base system, it seems effective to extract and examine knowledge fragments of limited objects. (author)

  5. Nuclear Structure Research at Richmond

    International Nuclear Information System (INIS)

    Beausang, Cornelius W.

    2015-01-01

    The goals for the final year were; (1) to continue ongoing efforts to develop and enhance GRETINA and work towards GRETA; (2) to investigate the structure of non-yrast states in shape transitional Sm and Gd nuclei; (3) to investigate the structure of selected light Cd nuclei; (4) to exploit the surrogate reaction technique to extract (n,f) cross sections for actinide nuclei, particularly the first measurement of the 236 Pu and 237 Pu(n,f) cross sections.

  6. Structural investigation of biogenic ferrihydrite nanoparticles dispersion

    International Nuclear Information System (INIS)

    Balasoiu, M.; Ishchenko, L.A.; Stolyar, S.V.; Iskhakov, R.S.; Rajkher, Yu.L.; Kuklin, A.I.; Solov'ev, D.V.; Arzumanyan, G.M.; Kurkin, T.S.; Aranghel, D.

    2010-01-01

    Structural properties of biogenic ferrihydrite nanoparticles produced by bacteria Klebsiella oxytoca are investigated. Investigations of morphology and size of particles dispersed in water by means of high-resolution transmission electron microscopy and small angle X-ray scattering measurements were performed. By model calculations followed by fitting procedure the structural parameters of a cylinder of radius R = (4.87 ± 0.02) nm and height L = (2.12 ± 0.04) nm are obtained

  7. Investigation of defect structures in solids

    Energy Technology Data Exchange (ETDEWEB)

    Dienel, G; Hubrig, W H; Schenk, M; Syhre, H [Zentralinstitut fuer Kernforschung, Rossendorf bei Dresden (German Democratic Republic)

    1976-01-01

    Some central points of interest of research in the field of defect structures in solids dealt with at the Central Institute of Nuclear Research at Rossendorf in the last years are presented. Studies on f.c.c. and b.c.c. metals, radiation-induced phase transitions in perovskites and ion-implanted silicon are described in some detail.

  8. Mizunami Underground Research Laboratory project. A project on research stage of investigating prediction from ground surface. Project report at fiscal year of 2000 to 2004

    International Nuclear Information System (INIS)

    2000-04-01

    This was a detailed plan after fiscal year 2000 on the first stage of the Research stage at investigating prediction from ground surface' in three researches carried out at the Mizunami Underground Research Laboratory (MIU) according to the 'Basic plan on research of underground science at MIU', based on progress of investigation and research before fiscal year 1999. This project contains following three items as its general targets; establishment of general investigating techniques for geological environment, collection of informations on deep underground environment, and development on foundation of engineering technology at super-deep underground. And, targets at investigating prediction stage from ground surface contain acquisition of geological environment data through investigations from ground surface to predict changes of the environment accompanied with underground geological environment and construction of experimental tunnel, to determine evaluating method on prediction results, and to determine plannings of an investigating stage accompanied with excavation of the tunnel by carrying out detail design of the tunnel. Here were introduced about results and problems on the investigation of the first phase, the integration of investigating results, and the investigation and researches on geology/geological structure, hydrology and geochemistry of groundwater, mechanical properties of rocks, and the mass transfer. (G.K.)

  9. Nuclear Structure Research at Richmond

    Energy Technology Data Exchange (ETDEWEB)

    Beausang, Cornelius W. [Univ. of Richmond, VA (United States)

    2015-04-30

    The goals for the final year were; (1) to continue ongoing efforts to develop and enhance GRETINA and work towards GRETA; (2) to investigate the structure of non-yrast states in shape transitional Sm and Gd nuclei; (3) to investigate the structure of selected light Cd nuclei; (4) to exploit the surrogate reaction technique to extract (n,f) cross sections for actinide nuclei, particularly the first measurement of the 236Pu and 237Pu(n,f) cross sections.

  10. Research and Development of Rapid Design Systems for Aerospace Structure

    Science.gov (United States)

    Schaeffer, Harry G.

    1999-01-01

    This report describes the results of research activities associated with the development of rapid design systems for aerospace structures in support of the Intelligent Synthesis Environment (ISE). The specific subsystems investigated were the interface between model assembly and analysis; and, the high performance NASA GPS equation solver software system in the Windows NT environment on low cost high-performance PCs.

  11. Horonobe Underground Research Laboratory project. Synthesis of phase 1 investigation 2001-2005, Volume 'geological disposal research'

    International Nuclear Information System (INIS)

    Fujita, Tomoo; Taniguchi, Naoki; Maekawa, Keisuke; Sawada, Atsushi; Makino, Hitoshi; Sasamoto, Hiroshi; Yoshikawa, Hideki; Shibata, Masahiro; Ota, Kunio; Miyahara, Kaname; Naito, Morimasa; Yui, Mikazu; Matsui, Hiroya; Hama, Katsuhiro; Kunimaru, Takanori; Takeuchi, Ryuji; Tanai, Kenji; Kurikami, Hiroshi; Wakasugi, Keiichiro; Ishii, Eiichi

    2011-03-01

    This report summarizes the progress of research and development on geological disposal during the surface-based investigation phase (2001-2005) in the Horonobe Underground Research Laboratory project, of which aims are to apply the design methods of geological disposal and mass transport analysis to actual geological conditions obtained from the project as an example of actual geological environment. For the first aim, the design methods for the geological disposal facility proposed in 'H12 report (the second progress report)' was reviewed and then improved based on the recent knowledge. The applicability of design for engineered barrier system, backfill of disposal tunnel, underground facility was illustrated. For the second aim, the conceptual structure from site investigation and evaluation to mass transport analysis was developed as a work flow at first. Then following this work flow a series of procedures for mass transport analysis was applied to the actual geological conditions to illustrate the practical workability of the work flow and the applicability of this methodology. Consequently, based on the results, future subjects were derived. (author)

  12. Recent Advances in Heliogyro Solar Sail Structural Dynamics, Stability, and Control Research

    Science.gov (United States)

    Wilkie, W. Keats; Warren, Jerry E.; Horta, Lucas G.; Lyle, Karen H.; Juang, Jer-Nan; Gibbs, S. Chad; Dowell, Earl H.; Guerrant, Daniel V.; Lawrence, Dale

    2015-01-01

    Results from recent NASA sponsored research on the structural dynamics, stability, and control characteristics of heliogyro solar sails are summarized. Specific areas under investigation include coupled nonlinear finite element analysis of heliogyro membrane blade with solar radiation pressure effects, system identification of spinning membrane structures, and solarelastic stability analysis of heliogyro solar sails, including stability during blade deployment. Recent results from terrestrial 1-g blade dynamics and control experiments on "rope ladder" membrane blade analogs, and small-scale in vacuo system identification experiments with hanging and spinning high-aspect ratio membranes will also be presented. A low-cost, rideshare payload heliogyro technology demonstration mission concept is used as a mission context for these heliogyro structural dynamics and solarelasticity investigations, and is also described. Blade torsional dynamic response and control are also shown to be significantly improved through the use of edge stiffening structural features or inclusion of modest tip masses to increase centrifugal stiffening of the blade structure. An output-only system identification procedure suitable for on-orbit blade dynamics investigations is also developed and validated using ground tests of spinning sub-scale heliogyro blade models. Overall, analytical and experimental investigations to date indicate no intractable stability or control issues for the heliogyro solar sail concept.

  13. Investigating the Place and Meaning of "Physical Education" to Preschool Children: Methodological Lessons from a Research Study

    Science.gov (United States)

    McEvilly, Nollaig

    2015-01-01

    Preschool physical education has not been extensively researched. Furthermore, research in physical activity and physical education rarely seeks young children's perspectives. The current paper focuses on one aspect of a post-structural study concerned with investigating the place and meaning of "physical education" to practitioners and…

  14. Department of Structural Research - Overview

    International Nuclear Information System (INIS)

    Wasiutynski, T.

    2002-01-01

    at the Dubna IBR-2 reactor. As a part of a larger project undertaken with Institute for Energietekknik (Kjeller, Norway) the low energy excitations have been studied in a glass and in two crystalline phases of the glass-forming triphenyl phosphite. Results of investigations of the dynamics of the methyl groups in the crystalline phase of 1,3,5,-(CH 3 ) 3 C 6 H 3 have been used during a testing procedure of computer simulation of the molecular dynamics based on the quantum chemistry methods. Neutron scattering is also used to investigate properties of polymers: polymer electrolytes and blends. Deep inelastic (''Compton'') scattering was applied to find the relation between stretching of the samples and kinetic energy of particular nuclei (the method capable of detecting potential anharmonicity). Structural factors affecting polymer miscibility were further studied by polarized neutron scattering techniques. In this research we cooperate with the Open University, Oxford, UK. Our theoretical studies concern phase transitions in molecular crystals as well as general dynamical properties of anharmonic surfaces and other structural defects. For an isomorphous phase transitions in the mixture of the fullerenes C 70(1-x) C 60x the highly anisotropic pseudospin model has been proposed, which turned out to be equivalent to the Ising model with two states of different statistical weights. The prediction of a disordered low temperature crystal has been confirmed by the dilatometric data. Delayed differential equantions governing the propagation of waves through an anharmonic defect have been solved with the use of an analogous electric circuit. Similar equations have been proposed to explain the deviation of the Curie constants from their mean field approximation values due to anharmonic effects in the temperature range close to the phase transition. Magnetic investigations have been performed for a wide scope of materials. For ternary 4f - 4d, 5d intermetallic compounds

  15. How well does early-career investigators' cardiovascular outcomes research training align with funded outcomes research?

    Science.gov (United States)

    Crowley, Matthew J; Al-Khatib, Sana M; Wang, Tracy Y; Khazanie, Prateeti; Kressin, Nancy R; Krumholz, Harlan M; Kiefe, Catarina I; Wells, Barbara L; O'Brien, Sean M; Peterson, Eric D; Sanders, Gillian D

    2018-02-01

    Outcomes research training programs should prepare trainees to successfully compete for research funding. We examined how early-career investigators' prior and desired training aligns with recently funded cardiovascular (CV) outcomes research. We (1) reviewed literature to identify 13 core competency areas in CV outcomes research; (2) surveyed early-career investigators to understand their prior and desired training in each competency area; (3) examined recently funded grants commonly pursued by early-career outcomes researchers to ascertain available funding in competency areas; and (4) analyzed alignment between investigator training and funded research in each competency area. We evaluated 185 survey responses from early-career investigators (response rate 28%) and 521 funded grants from 2010 to 2014. Respondents' prior training aligned with funded grants in the areas of clinical epidemiology, observational research, randomized controlled trials, and implementation/dissemination research. Funding in community-engaged research and health informatics was more common than prior training in these areas. Respondents' prior training in biostatistics and systematic review was more common than funded grants focusing on these specific areas. Respondents' desired training aligned similarly with funded grants, with some exceptions; for example, desired training in health economics/cost-effectiveness research was more common than funded grants in these areas. Restricting to CV grants (n=132) and National Heart, Lung, and Blood Institute-funded grants (n=170) produced similar results. Identifying mismatch between funded grants in outcomes research and early-career investigators' prior/desired training may help efforts to harmonize investigator interests, training, and funding. Our findings suggest a need for further consideration of how to best prepare early-career investigators for funding success. Copyright © 2017. Published by Elsevier Inc.

  16. A Genre-Based Investigation of Discussion Sections of Research Articles in Dentistry and Disciplinary Variation

    Science.gov (United States)

    Basturkmen, Helen

    2012-01-01

    Outwardly the rhetorical organisation of sections of research reports in different disciplines can appear similar. Close examination, however, may reveal subtle differences. Numerous studies have drawn on the genre-based approach developed by Swales (1990, 2004) to investigate the schematic structure of sections of articles in a range of…

  17. Investigations of the Structure of Titanate Nanoscrolls

    International Nuclear Information System (INIS)

    Sheppard, D.A.; Buckley, C.E.

    2005-01-01

    Full text: Nanosized materials have attracted much research lately due to their unique properties and their potential application in nanoelectronic and optoelectronic devices. Nanostructured materials have also sparked interest as possible hydrogen storage candidates. Research at Curtin University has shown titanate nanoscrolls to absorb modest amounts of hydrogen at low temperatures. Whether or not this capacity can be improved will be dependent on a thorough understanding of the structure and the way it interacts with hydrogen. Titanate nanoscrolls are made via a soft chemical process that involves ageing TiO 2 powder in a concentrated NaOH solution. The resultant nanoscrolls, once filtered and washed, are typically 8-10 nm in diameter and hundreds of nanometers long. The walls consist of 3-5 layers and the diameter of the hollow centre is typically 5 nm. A number of different structures have been assigned to nanoscrolls produced via the soft chemical process. These include anatase, H 2 Ti 3 O 7 , lepidocrocite-type structure and H 2 Ti 4 O 9 .H 2 O. Many of these structures are similar, consisting of titanate type layers, and qualitatively reproduce the X-ray diffraction data. However, preliminary data suggests that these structures are inconsistent with neutron diffraction data. Here we attempt a more quantitative analysis of the structure than those published previously using neutron and X-ray diffraction. (authors)

  18. Modeling the Skills and Practices of Scientists through an 'All-Inclusive' Comparative Planetology Student Research Investigation

    Science.gov (United States)

    Graff, P. V.; Bandfield, J. L.; Stefanov, W. L.; Vanderbloemen, L.; Willis, K. J.; Runco, S.

    2013-12-01

    To effectively prepare the nation's future Science, Technology, Engineering, and Mathematics (STEM) workforce, students in today's classrooms need opportunities to engage in authentic experiences that model skills and practices used by STEM professionals. Relevant, real-world authentic research experiences allow students to behave as scientists as they model the process of science. This enables students to get a true sense of STEM-related professions and also allows them to develop the requisite knowledge, skills, curiosity, and creativity necessary for success in STEM careers. Providing professional development and opportunities to help teachers infuse research in the classroom is one of the primary goals of the Expedition Earth and Beyond (EEAB) program. EEAB, facilitated by the Astromaterials Research and Exploration Science (ARES) Directorate at the NASA Johnson Space Center, is an Earth and planetary science education program designed to inspire, engage, and educate teachers and students in grades 5-12 by getting them actively involved with exploration, discovery, and the process of science. The program combines the expertise of scientists and educators to ensure the professional development provided to classroom teachers is scientifically valid and also recognizes classroom constraints. For many teachers, facilitating research in the classroom can be challenging. In addition to addressing required academic standards and dealing with time constraints, challenges include structuring a research investigation the entire class can successfully complete. To build educator confidence, foster positive classroom research experiences, and enable teachers to help students model the skills and practices of scientists, EEAB has created an 'all-inclusive' comparative planetology research investigation activity. This activity addresses academic standards while recognizing students (and teachers) potentially lack experience with scientific practices involved in conducting

  19. Structural investigations of some metallic glasses

    International Nuclear Information System (INIS)

    Sietsma, J.

    1987-03-01

    Metallic glasses were prepared by the melt spinning technique from iron and nickel alloys (Fe-Ni-P; Fe-B; Ni-Nb; Ni-B). Structure investigations were made by means of neutron diffraction experiments. Distribution functions and range orders were determined. (Auth.)

  20. Report of radioactivity investigation and research in fiscal year 1984

    International Nuclear Information System (INIS)

    1985-11-01

    National Institute of Radiological Sciences has continuously carried out the investigation and research on the environmental radioactivity level due to the radioactive fallout accompanying nuclear explosion experiments and the radioactive substances released from nuclear facilities and on the safety analysis of those since fiscal year 1959 as a part of the radioactivity investigation and research of Science and Technology Agency. The importance of radioactivity investigation and research increases more accompanying the remarkable progress of the peaceful use of atomic energy and the emphasis placed on the safety analysis of atomic energy utilization. In such situation, in fiscal year 1984, by appropriating the total budget of about 105 million yen, the investigation of the radioactivity level and dose in environment, foods and human bodies, the investigation of the level around nuclear facilities, the business of radioactivity data center, the basic research on the evaluation of the results of radioactivity investigation, the training of environmental radiation monitoring technicians, and the investigation and research on the measurement of and countermeasures to emergency radiation exposure were carried out. In this book, the results of these investigation and research are reported. (Kako, I.)

  1. Investigation of Physics Teacher Candidates' Cognitive Structures about "Electric Field": A Free Word Association Test Study

    Science.gov (United States)

    Türkkan, Ercan

    2017-01-01

    The aim of this study is to investigate the cognitive structures of physics teacher candidates about "electric field." Phenomenographic research method, one of the qualitative research patterns, was used in the study. The data of the study was collected from 91 physics teacher candidates who had taken General Physics II course at…

  2. Dual use research: investigation across multiple science disciplines.

    Science.gov (United States)

    Oltmann, Shannon

    2015-04-01

    Most recent studies of dual use research have focused on the life sciences, although some researchers have suggested that dual use research occurs across many disciplines. This research is an initial investigation into the prevalence of dual use research in other scientific disciplines by surveying senior editors of scientific journals, drawn from Journal Citation Reports. The survey was emailed to 7,500 journal editors with a response rate of 10.1 %. Approximately 4.8 % of life science editors reported they had to consider whether to publish dual use research and 38.9 % said they decided to not publish the research in question. In disciplines other than the life sciences, 7.2 % of editors from other science disciplines reported that they had to consider whether to publish dual use research, and 48.4 % declined to publish it. The survey investigated relationships between dual use and the journal's source of funding and place of publication, but no relationships were found. Further research is needed to better understand the occurrence of dual use research in other science disciplines.

  3. Suggestions for Structuring a Research Article

    Science.gov (United States)

    Klein, James D.; Reiser, Robert A.

    2014-01-01

    Researchers often experience difficulty as they attempt to prepare journal articles that describe their work. The purpose of this article is to provide researchers in the field of education with a series of suggestions as to how to clearly structure each section of a research manuscript that they intend to submit for publication in a scholarly…

  4. Inverse Finite Method Investigation for Adaptive Structures

    Data.gov (United States)

    National Aeronautics and Space Administration — This research project is evaluating an innovative technique that uses fiber optic strain sensors to measure structural deformations and full field strains. An...

  5. Using structuration theory in action research

    DEFF Research Database (Denmark)

    Rose, Jeremy; Lewis, Paul

    2001-01-01

    Structuration theory, Giddens' meta theory of social practice, has been used for theorizing the IS field and for analyzing empirical case studies, but has been little used in any practical or action research context. In the action research project reported here, which concerns the development...

  6. The investigation on the structure, fabrication and applications of graphene

    Science.gov (United States)

    Du, Donghe

    By investigating the structure of graphene oxide (GO), the long-wavelength photoluminescence of GO is evidenced to be originated from the excimer formation between GO basal plane and oxidative debris (ODs) attached on the GO sheets. The thermally unstable ODs would induce micro-explosion of GO upon heating. A novel method is developed to supress the explosion and achieve simultaneous thermal reduction and nitrogen doping of graphene oxide in air. The high quality N-doped graphene demonstrate excellent electrocatalytic property in oxygen reduction reaction. Furthermore, an electronic textile material is fabricated by coating chemically reduced GO on a piece of non-woven fabric (GNWF). GNWF can be applied as wearable sensors to detect physiological signals of human body. This research work deepens the understanding on the structure and property of graphene based materials and provides a cost-effective fabrication method for large scale production of graphene, and hence facilitates the commercialization of graphene.

  7. Research Article Abstracts in Two Subdisciplines of Business--Move Structure and Hedging between Management and Marketing

    Science.gov (United States)

    Li, Qian; Pramoolsook, Issra

    2015-01-01

    The importance of RA abstracts lies in their influence on the readers' decision about whether the accompanying article is worth reading. A number of studies have investigated the move structure of abstracts and have generated several influential models. However, little research has been conducted on subdisciplinary variations in move structure of…

  8. Modeling the Skills and Practices of Scientists through an “All-Inclusive” Comparative Planetology Student Research Investigation

    Science.gov (United States)

    Graff, Paige; Bandfield, J.; Stefanov, W.; Vanderbloemen, L.; Willis, K.; Runco, S.

    2013-01-01

    To effectively prepare the nation's future Science, Technology, Engineering, and Mathematics (STEM) workforce, students in today's classrooms need opportunities to engage in authentic experiences that model skills and practices used by STEM professionals. Relevant, real-world authentic research experiences allow students to behave as scientists as they model the process of science. This enables students to get a true sense of STEM-related professions and also allows them to develop the requisite knowledge, skills, curiosity, and creativity necessary for success in STEM careers. Providing professional development and opportunities to help teachers infuse research in the classroom is one of the primary goals of the Expedition Earth and Beyond (EEAB) program. EEAB, facilitated by the Astromaterials Research and Exploration Science (ARES) Directorate at the NASA Johnson Space Center, is an Earth and planetary science education program designed to inspire, engage, and educate teachers and students in grades 5-12 by getting them actively involved with exploration, discovery, and the process of science. The program combines the expertise of scientists and educators to ensure the professional development provided to classroom teachers is scientifically valid and also recognizes classroom constraints. For many teachers, facilitating research in the classroom can be challenging. In addition to addressing required academic standards and dealing with time constraints, challenges include structuring a research investigation the entire class can successfully complete. To build educator confidence, foster positive classroom research experiences, and enable teachers to help students model the skills and practices of scientists, EEAB has created an "allinclusive" comparative planetology research investigation activity. This activity addresses academic standards while recognizing students (and teachers) potentially lack experience with scientific practices involved in conducting

  9. Perspectives for nuclear structure research at GSI: from halo nuclei to superheavy elements

    Energy Technology Data Exchange (ETDEWEB)

    Muenzenberg, G.

    1997-11-01

    After a brief overview on recent advances in the investigation of nuclei at the driplines and the upper end of the nuclear table key issues of nuclear structure research as adressed by new theoretical developments will be discussed in context with new developments in heavy-ion accelerators and experimental techniques. (orig.)

  10. Perspectives for nuclear structure research at GSI--from halo nuclei to superheavy elements

    International Nuclear Information System (INIS)

    Munzenberg, G.

    1997-01-01

    After a brief overview on recent advances in the investigation of nuclei at the drip lines and the upper end of the nuclear table key issues of nuclear structure research as addressed by new theoretical developments will be discussed in context with new developments in heavy-ion accelerators and experimental techniques

  11. New Investigations of the Gow Lake Impact Structure, Saskatchewan, Canada: Impact Melt Rocks, Astronaut Training, and More

    Science.gov (United States)

    Osinski, G. R.; Singleton, A. C.; Ozaruk, A.; Hansen, J. R.

    2012-03-01

    New investigations of the Gow Lake impact structure has revealed an almost complete sequence of impactites from the crater floor upward through a series of melt-free and melt-bearing rocks. This research involved an astronaut training component.

  12. FASEB Science Research Conference on Virus Structure and Assembly

    Science.gov (United States)

    2017-10-24

    Report: FASEB Science Research Conference on Virus Structure and Assembly The views, opinions and/or findings contained in this report are those of the...Title: FASEB Science Research Conference on Virus Structure and Assembly Report Term: 0-Other Email: srcgrants@faseb.org Distribution Statement...support for the 2016 FASEB Science Research Conference on Virus Structure and Assembly which was held July 24-29, 2016 in Steamboat Springs, CO. This

  13. Trends in RF-structure research

    International Nuclear Information System (INIS)

    Henke, H.

    1995-01-01

    New trends in RF structure research are presented. The choice is limited to developments as they are required by the next generation of light sources, particle factories and linear colliders. Therefore, emphasis is put on the suppression of higher order modes either in standing or travelling wave resonators and on the development of superconducting cavities. Finally, a brand new development of very high frequency structures with planar geometry suited for fabrication by lithography is mentioned. copyright 1995 American Institute of Physics

  14. Microbial transformation of coal and coal relevant structures - presentation of a BMBF joint research project

    Energy Technology Data Exchange (ETDEWEB)

    Sinder, C.; Schacht, S.; Pfeifer, F.; Klein, J. [DMT-Gesellschaft fuer Forschung und Pruefung mbH, Essen (Germany)

    1997-12-31

    Investigations in the joint research project `Microbial transformation of coal and coal relevant structures` supported by the Ministry of Education, Science, Research and Technology (BMBF) of the Federal Republic of Germany and coordinated by the DMT-Gesellschaft fuer Forschung und Pruefung mbH (DMT) are focussed on research and development of biotechnological coal conversion processes. Up to now investigations carried out in the project lead to a number of important results. During work on the project a great number of different microorganisms was found able to degrade or solubilize coal or lignite. Enzymatic as well as regulation mechanisms of the microbial depolymerization processes have been characterized successfully. (orig.)

  15. Generic Structure of Discussion Sections in ESP Research Articles across International and Iranian Journals

    Directory of Open Access Journals (Sweden)

    Masoud Khalili Sabet

    2015-04-01

    Full Text Available Reviewing literature reveals that identifying generic structure of research articles (RAs in different fields of study, especially ESP, has received much attention. The major purpose behind such trends of research has been raising researchers' awareness of the common conventions in writing RAs. Along with this universal trend, a lot of genre studies have been done in Iranian context; however, it seems that ESP RAs have not been paid due attention yet. Hence this study aimed at investigating the generic structure of ESP RAs in international and Iranian journals. Applying Kanoksilapatham's (2007 model to the compiled corpus, it was found that contextualizing the study (Move 1 and consolidating results (Move 2 were the obligatory moves in Discussion section of ESP RAs across international and Iranian journals. Evaluation of the findings was a new step found in international Discussion sections but absent in Iranian ones. Related discussion of these findings prepares the researchers for publishing in international and Iranian ESP journals. Keywords: ESP, Discussion section, Move, Step, Author presence, Generic structure

  16. Competition of two supply chains with different risk structures: applying market research option

    Directory of Open Access Journals (Sweden)

    A. Hafezolkotob

    2012-01-01

    Full Text Available Demand uncertainty obliges all participants through a supply chain to make decisions under uncertainty. These decisions extend across price, investment, production, and inventory quantities. We take account of competition between two supply chains under demand uncertainty. These chains internally are involved in vertical pricing competition; however, they externally participate in horizontal pricing and service level competitions by offering a single-type product to the market. Since firms may have various attitudes against demand uncertainty and its related risks, different risk structures for competitive supply chains are considered. We assume that risk-averse firms are able to decrease demand uncertainty by information gathered from market research. For risk-averse participants in a chain, market research investment is an appropriate ground for vertical coordination, which diminishes risk through a supply chain. Optimal strategies based on game theory are obtained for different risk structures; furthermore, for each structure the effects of risk sensitivity as well as market research efficiency on these optimal strategies are investigated. Finally, we propose two scenarios for information sharing between risk-averse participants.

  17. The experiment research of the friction sliding isolation structure

    Science.gov (United States)

    Zhang, Shirong; Li, Jiangle; Wang, Sheliang

    2018-04-01

    This paper investigated the theory of the friction sliding isolation structure, The M0S2 solid lubricant was adopted as isolation bearing friction materials, and a new sliding isolation bearing was designed and made. The formula of the friction factor and the compression stress was proposed. The feasibility of the material MoS2 used as the coating material in a friction sliding isolation system was tested on the 5 layers concrete frame model. Two application experiment conditions were presented. The results of the experiment research indicated that the friction sliding isolation technology have a good damping effect.

  18. Research and investigation on medical usage of cyclotrons as a special research project

    International Nuclear Information System (INIS)

    1980-01-01

    In the National Institute of Radiological Sciences, the special research project ''Research and investigation on the medical usage of cyclotrons'' had been carried out in the three years program from fiscal 1976 to 1978. Its purpose was to establish the methods of therapy using particle beam such as fast neutrons and the methods of diagnosis using short-lived radioisotopes and positron-emitting radioisotopes. The works were conducted comprehensively in cooperation of the personnel both in and outside the NIRS. Consequently, the purpose was able to be fulfilled satisfactorily. Following on this project, a new special research project ''Research and investigation on the medical usage of particle accelerators'' was started in fiscal 1979. These results are described on the effects of the therapy, diagnostic utilizations, and the medical usage of heavy ion accelerators. (J.P.N.)

  19. Structural Investigation of Alkali Activated Clay Minerals for Application in Water Treatment Systems

    Science.gov (United States)

    Bumanis, G.; Bajare, D.; Dembovska, L.

    2015-11-01

    Alkali activation technology can be applied for a wide range of alumo-silicates to produce innovative materials with various areas of application. Most researches focuse on the application of alumo-silicate materials in building industry as cement binder replacement to produce mortar and concrete [1]. However, alkali activation technology offers high potential also in biotechnologies [2]. In the processes where certain pH level, especially alkaline environment, must be ensured, alkali activated materials can be applied. One of such fields is water treatment systems where high level pH (up to pH 10.5) ensures efficient removal of water pollutants such as manganese [3]. Previous investigations had shown that alkali activation technology can be applied to calcined clay powder and aluminium scrap recycling waste as a foam forming agent to create porous alkali activated materials. This investigation focuses on the structural investigation of calcined kaolin and illite clay alkali activation processes. Chemical and mineralogical composition of both clays were determined and structural investigation of alkali activated materials was made by using XRD, DTA, FTIR analysis; the microstructure of hardened specimens was observed by SEM. Physical properties of the obtained material were determined. Investigation indicates the essential role of chemical composition of the clay used in the alkali activation process, and potential use of the obtained material in water treatment systems.

  20. Impact of co-investigators on pharmacy resident research publication

    Directory of Open Access Journals (Sweden)

    Stranges PM

    2017-06-01

    Full Text Available Objective: To explore influences of co-investigators on the successful publication of a pharmacy residency project. Methods: We analyzed published and non-published research presented at a regional pharmacy conference. Abstracts were matched 1:1 based on state and abstract year. We assessed university affiliation, number, degree, and H-Index of co-investigators on the abstract. Descriptive and inferential analyses were used to identify variables associated with resident publication. Results: University-affiliated programs (p=0.015, highest H-Index of a non-physician co-investigator (p=0.002, and positive H-Index (≥1 of a non-physician co-investigator (p=0.017 were significant predictors of resident publication on univariate analyses. There were no differences in the number of co-investigators (p=0.051, projects with physician co-investigators (p=1.000, or projects with Doctor of Philosophy (PhD or Master of Science (MS co-investigators (p=0.536 between published and non-published projects. Multivariate analysis found that the highest H-index of non-physician co-investigator remained significant as a predictor to resident publication (odds ratio (OR 1.09, 95% Confidence Interval (CI 1.01-1.17. Conclusions: The quality of co-investigators, as measured by an increasing H-Index, is associated with the successful publication of residency projects. More emphasis may need to be placed on resident research co-investigator selection and training to prepare pharmacy residents for research and scholarly activity.

  1. RATU - Nuclear power plant structural safety research programme

    International Nuclear Information System (INIS)

    Rintamaa, R.

    1992-07-01

    Studies on the structural materials in nuclear power plants create the experimental data and background information necessary for the structural integrity assessments of mechanical components. The research is carried out by developing experimental fracture mechanics methods including statistical analysis methods of materials property data, and by studying material ageing and, in particular, mechanisms of material deterioration due to neutron irradiation, corrosion and water chemistry. Besides material studies, new testing methods and sensors for measurement of loading and water chemistry parameters have been developed. The monitoring data obtained in real power plants has been used to simulate more precisely the real environment during laboratory tests. The research on structural analysis has focused on extending and verifying the analysis capabilities for structural assessments of nuclear power plants. A widely applicable system including various computational fracture assessment methods has been created with which different structural problems can be solved reliably and effectively. Research on reliability assessment of maintenance in nuclear power plants is directed to practical case studies on components and structures of safety importance, and to the development of models for maintenance related decision support. A systematic analysis of motor-operated valve has been performed

  2. On-line system for investigation of atomic structure

    International Nuclear Information System (INIS)

    Amus'ya, M.Ya.; Chernysheva, L.V.

    1983-01-01

    A description of the on-line ATOM system is presented that enables to investigate the structure of atomic electron shells and their interactions with different scattering particles-electrons, positronse photons, mesons - with the use of computerized numerical solutions. The problem is stated along with mathematical description of atomic properties including theoretical and numerical models for each investigated physical process. The ATOM system structure is considered. The Hartree-Fock method is used to determine the wave functions of the ground and excited atomic states. The programs are written in the ALGOL langauge. Different atomic characteristics were possible to be calculated for the first time with an accuracy exceeding an experimental one

  3. Criminal investigations of child abuse: the research behind "best practices".

    Science.gov (United States)

    Jones, Lisa M; Cross, Theodore P; Walsh, Wendy A; Simone, Monique

    2005-07-01

    This article reviews the research relevant to seven practices considered by many to be among the most progressive approaches to criminal child abuse investigations: multidisciplinary team investigations, trained child forensic interviewers, videotaped interviews, specialized forensic medical examiners, victim advocacy programs, improved access to mental health treatment for victims, and Children's Advocacy Centers (CACs). The review finds that despite the popularity of these practices, little outcome research is currently available documenting their success. However, preliminary research supports many of these practices or has influenced their development. Knowledge of this research can assist investigators and policy makers who want to improve the response to victims, understand the effectiveness of particular programs, or identify where assumptions about effectiveness are not empirically supported.

  4. Investigation of supersonic jets shock-wave structure

    Science.gov (United States)

    Zapryagaev, V. I.; Gubanov, D. A.; Kavun, I. N.; Kiselev, N. P.; Kundasev, S. G.; Pivovarov, A. A.

    2017-10-01

    The paper presents an experimental studies overview of the free supersonic jet flow structure Ma = 1.0, Npr = 5, exhausting from a convergent profiled nozzle into a ambient space. Also was observed the jets in the presence of artificial streamwise vortices created by chevrons and microjets located on the nozzle exit. The technique of experimental investigation, schlieren-photographs and schemes of supersonic jets, and Pitot pressure distributions, are presented. A significant effect of vortex generators on the shock-wave structure of the flow is shown.

  5. Six world-class research teams to investigate overcoming ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Six world-class research teams to investigate overcoming therapeutic resistance in high fatality cancers. 26 octobre 2017. Together with our partners the Canadian Institutes of Health Research, the Azrieli Foundation and the Israel Science Foundation we are pleased to announce the recipients of the Joint Canada-Israel ...

  6. Status of anesthesiology resident research education in the United States: structured education programs increase resident research productivity.

    Science.gov (United States)

    Ahmad, Shireen; De Oliveira, Gildasio S; McCarthy, Robert J

    2013-01-01

    The enhancement of resident research education has been proposed to increase the number of academic anesthesiologists with the skills and knowledge to conduct meaningful research. Program directors (PDs) of the U.S. anesthesiology residency programs were surveyed to evaluate the status of research education during residency training and to test the hypothesis that structured programs result in greater resident research productivity based on resident publications. Survey responses were solicited from 131 anesthesiology residency PDs. Seventy-four percent of PDs responded to the survey. Questions evaluated department demographic information, the extent of faculty research activity, research resources and research funding in the department, the characteristics of resident research education and resident research productivity, departmental support for resident research, and perceived barriers to resident research education. Thirty-two percent of programs had a structured resident research education program. Structured programs were more likely to be curriculum based, require resident participation in a research project, and provide specific training in presentation and writing skills. Productivity expectations were similar between structured and nonstructured programs. Forty percent of structured programs had > 20% of trainees with a publication in the last 2 years compared with 14% of departments with unstructured programs (difference, 26%; 99% confidence interval [CI], 8%-51%; P = 0.01). The percentage of programs that had research rotations for ≥2 months was not different between the structured and the nonstructured programs. A research rotation of >2 months did not increase the percentage of residents who had published an article within the last 2 months compared with a research rotation of 20% of residents with a publication in the last 2 years compared with 36% in programs with >20% of faculty involvement (difference, 21%; 99% CI, -4% to 46%; P = 0.03). Our

  7. Experimental investigations of the nuclear structure

    International Nuclear Information System (INIS)

    Gromov, K.Ya.

    1989-01-01

    The problem of experimental investigation into atomic nucleus structure is discussed. Examples of studying the properties of low-lying nucleus states using cyclotron-type accelerators for their production are presented. The consideration is conducted on the base of the Idisol experimental complex created at the Finland. Results of measuring masses of neutron-redundant rubidium nuclei are presented. Schemes of 160 Er and 108 In decay are presented. 12 refs.; 6 figs

  8. Nuclear Structure of the Heaviest Elements – Investigated at SHIP-GSI

    Directory of Open Access Journals (Sweden)

    Heßberger Fritz Peter

    2014-03-01

    Full Text Available The quest for the heaviest nuclei that can exist is a basic topic in natural science as their stability is characterized by a delicate interplay of short range nuclear forces acting between the nucleons (protons and neutrons and long-range Coulomb forces acting solely between charged particles, i.e. the protons. As the stability of a nucleus is strongly correlated to its structure, understanding the nuclear structure of heaviest nuclei is presently a main challenge of experimental and theoretical investigations concerning the field of Superheavy Elements. At the velocity filter SHIP at GSI Darmstadt an extensive program on nuclear structure investigations has been started about a decade ago. The project covered both as well systematic investigations of single particle levels in odd-mass isotopes populated by α-decay as investigation of two- or fourquasi-particle states forming K isomers and was supplemented by direct mass measurements at SHIPTRAP and investigation of spontaneous fission properties. Recent experimental studies allowed to extend the systematics of low lying levels in N = 151 and N = 153 up to 255Rf and 259Sg, investigation of possible relations between nuclear structure and fission properties of odd-mass nuclei and investigation of shell strengths at N = 152 and towards N = 162.

  9. Multi-Probe Investigation of Proteomic Structure of Pathogens

    International Nuclear Information System (INIS)

    Malkin, A J; Plomp, M; Leighton, T J; Vogelstein, B; Wheeler, K E

    2008-01-01

    Complete genome sequences are available for understanding biotransformation, environmental resistance and pathogenesis of microbial, cellular and pathogen systems. The present technological and scientific challenges are to unravel the relationships between the organization and function of protein complexes at cell, microbial and pathogens surfaces, to understand how these complexes evolve during the bacterial, cellular and pathogen life cycles, and how they respond to environmental changes, chemical stimulants and therapeutics. In particular, elucidating the molecular structure and architecture of human pathogen surfaces is essential to understanding mechanisms of pathogenesis, immune response, physicochemical interactions, environmental resistance and development of countermeasures against bioterrorist agents. The objective of this project was to investigate the architecture, proteomic structure, and function of bacterial spores through a combination of high-resolution in vitro atomic force microscopy (AFM) and AFM-based immunolabeling with threat-specific antibodies. Particular attention in this project was focused on spore forming Bacillus species including the Sterne vaccine strain of Bacillus anthracis and the spore forming near-neighbor of Clostridium botulinum, C. novyi-NT. Bacillus species, including B. anthracis, the causative agent of inhalation anthrax are laboratory models for elucidating spore structure/function. Even though the complete genome sequence is available for B. subtilis, cereus, anthracis and other species, the determination and composition of spore structure/function is not understood. Prof. B. Vogelstein and colleagues at the John Hopkins University have recently developed a breakthrough bacteriolytic therapy for cancer treatment (1). They discovered that intravenously injected Clostridium novyi-NT spores germinate exclusively within the avascular regions of tumors in mice and destroy advanced cancerous lesions. The bacteria were also

  10. Horonobe Underground Research Laboratory project. Investigation report for the 2006 fiscal year

    International Nuclear Information System (INIS)

    Matsui, Hiroya; Nakayama, Masashi; Sanada, Hiroyuki

    2008-05-01

    The Horonobe Underground Research Laboratory is planned to extend over a period of 20 years. The investigations will be conducted in three phases, namely 'Phase 1: Surface-based investigations', 'Phase 2: Construction Phase' (investigations during construction of the underground facilities) and 'Phase 3: Operation phase' (research in the underground facilities). This report summarizes the results of the investigations for the 2006 fiscal year (2006/2007), the second year of the Phase 2 investigations. The investigations, which are composed of 'Geoscientific research' and 'R and D on the geological disposal of high-level radioactive waste (HLW)', were carried out according to 'Horonobe Underground Research Laboratory Project Investigation Program for the 2006 Fiscal Year'. The results of these investigations, along with the results which were obtained in other departments of Japan Atomic Energy Agency (JAEA), are properly offered to the implementations and the safety regulations. JAEA proceeded with the project in, collaboration with experts from domestic and overseas research organisation. (author)

  11. Horonobe Underground Research Laboratory project. Investigation report for the 2007 fiscal year

    International Nuclear Information System (INIS)

    Nakayama, Masashi; Sanada, Hiroyuki; Sugita, Yutaka

    2008-09-01

    The Horonobe Underground Research Laboratory Project is planned to extend over a period of 20 years. The investigations will be conducted in three phases, namely 'Phase 1: Surface-based investigations', 'Phase 2: Construction Phase' (investigations during construction of the underground facilities) and 'Phase 3: Operation phase' (research in the underground facilities). This report summarizes the results of the investigations for the 2007 fiscal year (2007/2008), the 3rd year of the Phase 2 investigations. The investigations, which are composed of 'Geoscientific research' and 'R and D on the geological disposal of high-level radioactive waste (HLW)', were carried out according to 'Horonobe Underground Research Laboratory Project Investigation Program for the 2007 Fiscal Year'. The results of these investigations, along with the results which were obtained in other departments of Japan Atomic Energy Agency (JAEA), are properly offered to the implementations and the safety regulations. JAEA proceeded with the project in collaboration with experts from domestic and overseas research organisation. (author)

  12. Horonobe Underground Research Laboratory project investigation report for the 2008 fiscal year

    International Nuclear Information System (INIS)

    Nakayama, Masashi; Sano, Michiaki; Sanada, Hiroyuki; Sugita, Yutaka

    2009-11-01

    The Horonobe Underground Research Laboratory Project is planned to extend over a period 20 years. The investigations will be conducted in three phases, namely 'Phase 1: Surface-based investigations' 'Phase 2: Construction Phase' (investigations during construction of the underground facilities) and 'Phase 3: Operation phase' (research in the underground facilities). This report summarizes the results of the investigations for the 2008 fiscal year (2008/2009), the 4th year of the Phase 2 investigations. The investigations, which are composed of 'Geoscientific research' and 'R and D on geological disposal technology', were carried out according to 'Horonobe Underground Research Laboratory Project Investigation Program for the 2008 Fiscal year'. The results of these investigations, along with the results which were obtained in other departments of Japan Atomic Energy Agency (JAEA), are properly offered to the implementations and the safety regulations. For the sake of this, JAEA has proceeded with the project in collaboration with experts from domestic and overseas research organisations. (author)

  13. An arc detector for neutron crystal structure investigations

    Energy Technology Data Exchange (ETDEWEB)

    Habib, N [Reactor and Neutron Physics Dept., Nuclear Research Center. AEA, Cairo (Egypt)

    1997-12-31

    An arc detector for neutron structure investigations of powder crystals using time-of-flight technique is described. In order to enable the measurement of integral intensity from about 1/4 of the Debye-Scherrer ring and for simplicity reasons, the scattering angle 20-90 degree was chosen and a special arc collimator was built. The arc collimator-detector had a divergency of about 20 minutes of arc, and the distance between detector-sample was 64 cm. Four {sup 3} He detectors were fixed on the arc of the collimator. Both efficiency and space sensitivity of the detector were determined using a point neutron source. Results of measurements show that parameters of the arc detector are acceptable for high resolution crystal structure investigations. 6 figs.

  14. INVESTIGATION OF THERMAL BEHAVIOR OF MULTILAYERED FIRE RESISTANT STRUCTURE

    Directory of Open Access Journals (Sweden)

    R. GUOBYS

    2016-09-01

    Full Text Available This paper presents experimental and numerical investigations of thermal behavior under real fire conditions of new generation multilayered fire resistant structure (fire door, dimensions H × W × D: 2090 × 980 × 52 mm combining high strength and fire safety. This fire door consists of two steel sheets (thickness 1.5 and 0.7 mm with stone wool ( = 33 kg/m3, k = 0.037 W/mK, E = 5000 N/m2,  = 0.2 insulating layer in between. One surface of the structure was heated in fire furnace for specified period of time of 60 min. Temperature and deformation of opposite surface were measured from outside at selected measuring points during fire resistance test. Results are presented as temperature-time and thermal deformation-time graphs. Experimental results were compared with numerical temperature field simulation results obtained from SolidWorks®Simulation software. Numerical results were found to be in good agreement with experimental data. The percent differences between door temperatures from simulation and fire resistance test don’t exceed 8%. This shows that thermal behaviour of such multilayered structures can be investigated numerically, thus avoiding costly and time-consuming fire resistance tests. It is established that investigated structure should be installed in a way that places thicker steel sheet closer to the potential heat source than thinner one. It is also obtained that stone wool layer of higher density should be used to improve fire resistance of the structure.

  15. Horonobe Underground Research Laboratory project. Investigation report for the 2010 fiscal year

    International Nuclear Information System (INIS)

    Nakayama, Masashi; Sawada, Sumiyuki; Sugita, Yutaka

    2011-09-01

    The Horonobe Underground Research Laboratory Project is planned to extend over a period 20 years. The investigations will be conducted in three phases, namely 'Phase 1: Surface-based investigations', 'Phase 2: Construction Phase' (investigations during construction of the underground facilities) and 'Phase 3: Operation phase' (research in the underground facilities). This report summarizes the results of the investigations for the 2010 fiscal year (2010/2011). The investigations, which are composed of 'Geoscientific research' and 'R and D on geological disposal technology', were carried out according to 'Horonobe Underground Research Laboratory Project Investigation Program for the 2010 Fiscal year'. The results of these investigations, along with the results which were obtained in other departments of Japan Atomic Energy Agency (JAEA), are properly offered to the implementations and the safety regulations. For the sake of this, JAEA has proceeded with the project in collaboration with experts from domestic and overseas research organisations. (author)

  16. Design Investigation on Applicable Mesh Structures for Medical Stent Applications

    Science.gov (United States)

    Asano, Shoji; He, Jianmei

    2017-11-01

    In recent years, utilization of medical stents is one of effective treatments for stenosis and occlusion occurring in a living body’s lumen indispensable for maintenance of human life such as superficial femoral artery (SFA) occlusion. However, there are concerns about the occurrence of fatigue fractures caused by stress concentrations, neointimal hyperplasia and the like due to the shape structure and the manufacturing method in the conventional stents, and a stent having high strength and high flexibility is required. Therefore, in this research, applicable mesh structures for medical stents based on the design concepts of high strength, high flexibility are interested to solve various problem of conventional stent. According to the shape and dimensions of SFA occlusion therapy stent and indwelling delivery catheter, shape design of the meshed stent are performed using 3-dimensional CAD software Solid Works first. Then analytical examination on storage characteristics and compression characteristics of such mesh structure applied stent models were carried out through finite element analysis software ANSYS Workbench. Meshed stent models with higher strength and higher flexibility with integral molding are investigated analytically. It was found that the storage characteristics and compression characteristics of meshed stent modles are highly dependent on the basic mesh shapes with same surface void ratio. Trade-off relationship between flexibility and storage characteristics is found exited, it is required to provide appropriate curvatures during basic mesh shape design.

  17. Investigation of high burnup structures in uranium dioxide applying cellular automata: algorithms and codes

    International Nuclear Information System (INIS)

    Akishina, E.P.; Kostenko, B.F.; Ivanov, V.V.

    2003-01-01

    A new method of research in spatial structures that result from uranium dioxide burning in nuclear reactors of modern atomic plants is suggested. The method is based on the presentation of images of the mentioned structures in the form of the working field of a cellular automaton (CA). First, it has allowed one to extract some important quantitative characteristics of the structures directly from the micrographs of the uranium fuel surface. Secondly, the CA has been found out to allow one to formulate easily the dynamics of the evolution of the studied structures in terms of such micrograph elements as spots, spots' boundaries, cracks, etc. Relation has been found between the dynamics and some exactly solvable models of the theory of cellular automata, in particular, the Ising model and the vote model. This investigation gives a detailed description of some CA algorithms which allow one to perform the fuel surface image processing and to model its evolution caused by burnup or chemical etching. (author)

  18. Hydrogeological characterization of deep subsurface structures at the Mizunami Underground Research Laboratory

    International Nuclear Information System (INIS)

    Takeuchi, Shinji; Saegusa, Hiromitsu; Amano, Kenji; Takeuchi, Ryuji

    2013-01-01

    Several hydrogeological investigation techniques have been used at the Mizunami Underground Research Laboratory site to assess hydrogeological structures and their control on groundwater flow. For example, the properties of water-conducting features (WCFs) can be determined using high-resolution electrical conductivity measurements of fluids, and compared to measurements using conventional logging techniques. Connectivity of WCFs can be estimated from transmissivity changes over time, calculated from the pressure derivative of hydraulic pressure data obtained from hydraulic testing results. Hydraulic diffusivity, obtained from hydraulic interference testing by considering the flow dimension, could be a key indicator of the connectivity of WCFs between boreholes. A conceptual hydrogeological model of several hundred square meters to several square kilometers, bounded by flow barrier structures, has been developed from pressure response plots, based on interference hydraulic testing. The applicability of several methods for developing conceptual hydrogeological models has been confirmed on the basis of the hydrogeological investigation techniques mentioned above. (author)

  19. Mizunami Underground Research Laboratory project. Rock mechanical investigations annual report for fiscal year 2013

    International Nuclear Information System (INIS)

    Sato, Toshinori; Sanada, Hiroyuki; Tanno, Takeo

    2015-02-01

    In order to establish the scientific and technical basis for geological disposal of technology, Japan Atomic Energy Agency (JAEA) is pursuing the geoscientific research project namely the Mizunami Underground Research Laboratory (MIU) in the crystalline rock environment at Tono Geoscience Center (TGC). In the MIU Project, geoscientific research is being carried out in three overlapping phases; Surface-based Investigation Phase (Phase I: FY1996 - 2004), Construction Phase (Phase II: FY2004- in progress) and Operation Phase (Phase III: FY2010- in progress). In the rock mechanical investigations at the Phase II, the research aims at “Characterization of geological environment in the Excavation Disturbed Zone (EDZ)” from the viewpoint of safety assessment. For the research, the specific information of the EDZ such as (1) size and structures, (2) petrophysical/geomechanical properties, and (3) stress state are required. The research also aims at “Characterization of geomechanical stability around tunnel” from the viewpoint of design and construction of underground facilities. For the research, the specific information such as (4) local stress regime, (5) spatial variability of petrophysical/geomechanical properties of rocks, and (6) distribution of discontinuities intersecting underground tunnels are required. The measurement system for rock mass behavior has been manufactured and set for groundwater recovery experiment in the Phase III. This report presents the results of following rock mechanical investigations conducted in FY 2013. In-situ stress measurements using Compact Conical-ended Borehole Overcoring Technique were performed at the - 500m stage. Measurement system for rock mass displacement using optical fiber was installed at the - 500m stage as part of the groundwater recovery experiment. Study on the modeling based on equivalent continuum model was continued. Phenomenological study and theoretical study on long-term behavior of crystalline rock were

  20. Structural requirements of research tissue banks derived from standardized project surveillance.

    Science.gov (United States)

    Herpel, E; Koleganova, N; Schreiber, B; Walter, B; Kalle, C V; Schirmacher, P

    2012-07-01

    Tissue banks constitute decisive and rate-limiting resource and technology platforms for basic and translational biomedical research, notably in the area of cancer. Thus, it is essential to plan and structure tissue banking and allocate resources according to research needs, but essential requirements are still incompletely defined. The tissue bank of the National Center of Tumor Diseases Heidelberg (NCT) was founded with the intention to provide tissues of optimal quality and to prioritize the realization of research projects. We analysed its structure and prospective project management registration as well as tracking records for all projects of the NCT tissue bank as of its start in 2005 in order to obtain information that may be relevant for tissue bank planning. All project proposals submitted to the NCT tissue bank (n = 681) were included in the study. For a detailed evaluation of provided services, only projects that were completed until July 2011 (n = 605) were analysed. For these 605 projects, NCT tissue bank provided 769 specific services. In all projects/services, we recorded project leader, type and amount of material provided, type of research (basic/translational), work load of project and project completion. Furthermore, all completed projects were tracked after 90 days according to a standard protocol to determine principal investigators' (PI) satisfaction and quality of the provided material. Until July 2011, 605 projects had been successfully completed as documented by material transfer agreement. Of the projects, 72.7 % addressed basic research, 22.3 % were translational research projects and 3 % concerned epidemiological research; 91 % (n = 546) concerned a single PI and the NTC tissue bank. For these projects, 769 specific services were provided. Of these services, 288 concerned providing formalin-fixed and paraffin-embedded (FFPE) tissue (extracts, full size sections), 126 providing fresh frozen materials (including fresh frozen

  1. Advanced accelerator and mm-wave structure research at LANL

    Energy Technology Data Exchange (ETDEWEB)

    Simakov, Evgenya Ivanovna [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-06-22

    This document outlines acceleration projects and mm-wave structure research performed at LANL. The motivation for PBG research is described first, with reference to couplers for superconducting accelerators and structures for room-temperature accelerators and W-band TWTs. These topics are then taken up in greater detail: PBG structures and the MIT PBG accelerator; SRF PBG cavities at LANL; X-band PBG cavities at LANL; and W-band PBG TWT at LANL. The presentation concludes by describing other advanced accelerator projects: beam shaping with an Emittance Exchanger, diamond field emitter array cathodes, and additive manufacturing of novel accelerator structures.

  2. Structural investigation of chemically synthesized ferrite magnetic nanomaterials

    Science.gov (United States)

    Uyanga, E.; Sangaa, D.; Hirazawa, H.; Tsogbadrakh, N.; Jargalan, N.; Bobrikov, I. A.; Balagurov, A. M.

    2018-05-01

    In recent times, interest in ferrite magnetic nanomaterials has considerably grown, mainly due to their highly promising medical and biological applications. Spinel ferrite powder samples, with high heat generation abilities in AC magnetic fields, were studied for their application to the hyperthermia treatment of cancer tumors. These properties of ferrites strongly depend on their chemical composition, ion distribution between crystallographic positions, magnetic structure and method of preparation. In this study, crystal and magnetic structures of several magnetic spinels were investigated by neutron diffraction. The explanation of the mechanism triggering the heat generation ability in the magnetic materials, and the electronic and magnetic states of ferrite-spinel type structures, were theoretically defined by a first-principles method. Ferrites with the composition of CuxMg1-xFe2O4 have been investigated as a heat generating magnetic nanomaterial. Atomic fraction of copper in ferrite was varied between 0 and 100% (that is, x between 0 and 1.0 with 0.2 steps), with the copper dope limit corresponding to appear a tetragonal phase.

  3. Investigation on Mechanical Properties’ Anisotropy of Rod Units in Lattice Structures Fabricated by Selective Laser Melting

    Directory of Open Access Journals (Sweden)

    Jing Chenchen

    2017-01-01

    Full Text Available Lattice structure with high strength and low mass using selective laser melting (SLM has been a hot topic. However, there are some problems in the fabrication of lattice structure by SLM. Rod unit is the basic component of lattice structure and its performance affects the whole structure. It is necessary to investigate the influence of selective laser melting on rod unit’s mechanical properties. A series of rod units with different inclination angle and diameter were fabricated by SLM in this research. And the mechanical properties of these units were measured by tensile test. The results show that the rod units with different diameters and inclination angles have good mechanical properties and show no difference. It is a good news for lattice structure designing for there is no necessary to consider the mechanical properties’ anisotropy of rod units.

  4. Research Costs Investigated: A Study Into the Budgets of Dutch Publicly Funded Drug-Related Research

    NARCIS (Netherlands)

    T. van Asselt (Thea); B.L.T. Ramaekers (Bram); I. Corro Ramos (Isaac); M.A. Joore (Manuela); M.J. Al (Maiwenn); Lesman-Leegte, I. (Ivonne); M.J. Postma (Maarten); P. Vemer (Pepijn); T.L. Feenstra (Talitha)

    2017-01-01

    textabstractBackground: The costs of performing research are an important input in value of information (VOI) analyses but are difficult to assess. Objective: The aim of this study was to investigate the costs of research, serving two purposes: (1) estimating research costs for use in VOI analyses;

  5. Structural issues affecting mixed methods studies in health research: a qualitative study

    Science.gov (United States)

    2009-01-01

    Background Health researchers undertake studies which combine qualitative and quantitative methods. Little attention has been paid to the structural issues affecting this mixed methods approach. We explored the facilitators and barriers to undertaking mixed methods studies in health research. Methods Face-to-face semi-structured interviews with 20 researchers experienced in mixed methods research in health in the United Kingdom. Results Structural facilitators for undertaking mixed methods studies included a perception that funding bodies promoted this approach, and the multidisciplinary constituency of some university departments. Structural barriers to exploiting the potential of these studies included a lack of education and training in mixed methods research, and a lack of templates for reporting mixed methods articles in peer-reviewed journals. The 'hierarchy of evidence' relating to effectiveness studies in health care research, with the randomised controlled trial as the gold standard, appeared to pervade the health research infrastructure. Thus integration of data and findings from qualitative and quantitative components of mixed methods studies, and dissemination of integrated outputs, tended to occur through serendipity and effort, further highlighting the presence of structural constraints. Researchers are agents who may also support current structures - journal reviewers and editors, and directors of postgraduate training courses - and thus have the ability to improve the structural support for exploiting the potential of mixed methods research. Conclusion The environment for health research in the UK appears to be conducive to mixed methods research but not to exploiting the potential of this approach. Structural change, as well as change in researcher behaviour, will be necessary if researchers are to fully exploit the potential of using mixed methods research. PMID:20003210

  6. Structural issues affecting mixed methods studies in health research: a qualitative study.

    Science.gov (United States)

    O'Cathain, Alicia; Nicholl, Jon; Murphy, Elizabeth

    2009-12-09

    Health researchers undertake studies which combine qualitative and quantitative methods. Little attention has been paid to the structural issues affecting this mixed methods approach. We explored the facilitators and barriers to undertaking mixed methods studies in health research. Face-to-face semi-structured interviews with 20 researchers experienced in mixed methods research in health in the United Kingdom. Structural facilitators for undertaking mixed methods studies included a perception that funding bodies promoted this approach, and the multidisciplinary constituency of some university departments. Structural barriers to exploiting the potential of these studies included a lack of education and training in mixed methods research, and a lack of templates for reporting mixed methods articles in peer-reviewed journals. The 'hierarchy of evidence' relating to effectiveness studies in health care research, with the randomised controlled trial as the gold standard, appeared to pervade the health research infrastructure. Thus integration of data and findings from qualitative and quantitative components of mixed methods studies, and dissemination of integrated outputs, tended to occur through serendipity and effort, further highlighting the presence of structural constraints. Researchers are agents who may also support current structures - journal reviewers and editors, and directors of postgraduate training courses - and thus have the ability to improve the structural support for exploiting the potential of mixed methods research. The environment for health research in the UK appears to be conducive to mixed methods research but not to exploiting the potential of this approach. Structural change, as well as change in researcher behaviour, will be necessary if researchers are to fully exploit the potential of using mixed methods research.

  7. Horonobe Underground Research Laboratory project. Investigation program for the 2008 fiscal year

    International Nuclear Information System (INIS)

    Nakayama, Masashi; Sanada, Hiroyuki; Yamaguchi, Takehiro; Sugita, Yutaka

    2008-09-01

    As part of the research and development program on geological disposal of high-level radioactive waste (HLW), the Horonobe Underground Research Center, a division of the Japan Atomic Energy Agency (JAEA), is implementing the Horonobe Underground Research Laboratory Project (Horonobe URL Project) with the aim at investigating sedimentary rock formations. According to the research plan described in the Midterm Plan of JAEA, geological investigations are to be carried out during the drilling of a shaft down to intermediate depth, while research and development in the areas of engineering technology and safety assessment are to be promoted by collaboration with other research organizations. The results of the R and D activities will be systematized as a 'knowledge base' that supports a wide range of arguments related to the safety of geological disposal. The Horonobe URL Project is planned to extend over a period of 20 years. The investigations will be conducted in three phases, namely 'Phase 1: Surface-based investigations', 'Phase 2: Construction phase' (investigations during construction of the underground facilities) and 'Phase 3: Operation phase' (research in the underground facilities). This report summarizes the investigation program for the 2008 fiscal year (2008/2009), the 4th year of the Phase 2 investigations. In the 2008 fiscal year, investigations in geoscientific research', including 'development of techniques for investigating the geological environment', 'development of techniques for long-term monitoring of the geological environment', 'development of engineering techniques for use in the deep underground environment' and studies on the long-term stability of the geological environment', are continuously carried out. Investigations in 'research and development on geological disposal technology', including 'improving the reliability of disposal technologies' and 'enhancement of safety assessment methodologies', are also continuously carried out

  8. An investigation on vulnerability assessment of steel structures with thin steel shear wall through development of fragility curves

    OpenAIRE

    Mohsen Gerami; Saeed Ghaffari; Amir Mahdi Heidari Tafreshi

    2017-01-01

    Fragility curves play an important role in damage assessment of buildings. Probability of damage induction to the structure against seismic events can be investigated upon generation of afore mentioned curves. In current research 360 time history analyses have been carried out on structures of 3, 10 and 20 story height and subsequently fragility curves have been adopted. The curves are developed based on two indices of inter story drifts and equivalent strip axial strains of the shear wall. T...

  9. Investigating nurse practitioners in the private sector: a theoretically informed research protocol.

    Science.gov (United States)

    Adams, Margaret; Gardner, Glenn; Yates, Patsy

    2017-06-01

    To report a study protocol and the theoretical framework normalisation process theory that informs this protocol for a case study investigation of private sector nurse practitioners. Most research evaluating nurse practitioner service is focused on public, mainly acute care environments where nurse practitioner service is well established with strong structures for governance and sustainability. Conversely, there is lack of clarity in governance for emerging models in the private sector. In a climate of healthcare reform, nurse practitioner service is extending beyond the familiar public health sector. Further research is required to inform knowledge of the practice, operational framework and governance of new nurse practitioner models. The proposed research will use a multiple exploratory case study design to examine private sector nurse practitioner service. Data collection includes interviews, surveys and audits. A sequential mixed method approach to analysis of each case will be conducted. Findings from within-case analysis will lead to a meta-synthesis across all four cases to gain a holistic understanding of the cases under study, private sector nurse practitioner service. Normalisation process theory will be used to guide the research process, specifically coding and analysis of data using theory constructs and the relevant components associated with those constructs. This article provides a blueprint for the research and describes a theoretical framework, normalisation process theory in terms of its flexibility as an analytical framework. Consistent with the goals of best research practice, this study protocol will inform the research community in the field of primary health care about emerging research in this field. Publishing a study protocol ensures researcher fidelity to the analysis plan and supports research collaboration across teams. © 2016 John Wiley & Sons Ltd.

  10. Investigations of nuclear structure and nuclear reactions induced by complex projectiles

    International Nuclear Information System (INIS)

    Sarantites, D.G.

    1986-01-01

    The research conducted by the program is: (1) to investigate in detail the role of energy and angular momentum dissipation in the mechanisms of subbarrier fusion, in fusion at and above the barrier, in quasi-elastic and in strongly damped reactions of heavy ions; (2) to extend the above reaction mechanism studies in the regime of 10 to 50 MeV/amu employing techniques of complete detection including γ-rays, light charged particles, neutrons and heavy ions in real or kinematic 4π counting when possible; (3) the study of structural and shape changes of nuclei at very high spins and excitations; and (4) the development and use of novel techniques and instrumentation in the above studies. 76 refs., 27 figs

  11. The Method for Investigating the Structurization of Water-Organic Mixtures

    International Nuclear Information System (INIS)

    Karitskaya, S

    2013-01-01

    The investigation of the properties of micellar systems is of great practical importance, since the microheterogeneous structure, in particular, of aqueous-organic solutions can be used to create reaction centers with designed properties, which will make it possible to increase the efficiency of processes associated with the intramolecular conversion of the electronic excitation energy of a molecule. In the present paper, model systems to stimulate chemical reactions are the spatial-temporal structures (STS) formed as a result of photophysical and photochemical reactions, whose time characteristics are highly sensitive to a change in the solvent compositions. The STS evolution processes are slow and the structures formed have macroscopic sizes, which makes the system under consideration a convenient object for experimental studies. The spectral and time characteristics of the spatial-temporal structures luminescing when exposed to UV radiation in aqueous alcohol solutions of anthraquinone are investigated experimentally depending on the volume content of alcohol in a mixture. It is shown that the microheterogeneous structure of aqueous alcohol solutions considerably influences the behavior of the dissipative structures formed

  12. Research Costs Investigated : A Study Into the Budgets of Dutch Publicly Funded Drug-Related Research

    NARCIS (Netherlands)

    van Asselt, Thea; Ramaekers, Bram; Corro Ramos, Isaac; Joore, Manuela; Al, Maiwenn; Lesman-Leegte, Ivonne; Postma, Maarten; Vemer, Pepijn; Feenstra, Talitha

    BACKGROUND: The costs of performing research are an important input in value of information (VOI) analyses but are difficult to assess. OBJECTIVE: The aim of this study was to investigate the costs of research, serving two purposes: (1) estimating research costs for use in VOI analyses; and (2)

  13. Structural fire resistance experimental research priority needs of U.S. industry

    CERN Document Server

    Almand, Kathleen H

    2012-01-01

    Structural Fire Resistance Experimental Research – Priority Needs of U.S. Industry provides a synthesis of stakeholder input to a prioritized agenda for research at the National Fire Research Laboratory (NFRL) at the National Institute of Standards and Technology (NIST) designed to accelerate the implementation of performance-based fire engineering for structures. The NFRL presents a broad range of unanswered questions regarding the performance of real structures in fire conditions, and informs performance-based design methods and standards in this field. The authors conducted a comprehensive literature review of large-scale structural fire testing and compiled research needs from a variety of sources. The book addresses major issues of broad concern in the fire community, such as real fire exposure and structural response, composite floor system performance, enhancing modeling performance, and understanding the embedded safety features in design methods. It concludes with a prioritized set of research reco...

  14. Report on atomic structure research 1961-1990

    International Nuclear Information System (INIS)

    Fawcett, B.C.

    1990-07-01

    This report documents the atomic-structure research carried out during the period 1961-90. The contributions are in two main areas. The first comprises original line classifications of spectra of highly ionized atoms including identifications of a major proportion of newly observed lines in the solar far ultraviolet and soft X-ray spectrum. The second consists of theoretical calculations of atomic data such as oscillator strengths, wavelengths, energy levels and their composition. These were calculated with advanced atomic-structure codes and cover most solar abundant ions. A new method was applied to collision calculations. Research in this field, presently conducted at Rutherford Appleton Laboratory (RAL), was initiated in the United Kingdom Atomic Energy Authority (UKAEA) at Harwell in 1960. It continued under the UKAEA at Culham Laboratory in 1962 and until 1986 when staff were taken over by Science and Engineering Research Council (SERC) and later transferred to RAL in 1981. (author)

  15. NASA Lewis Research Center's materials and structures division

    International Nuclear Information System (INIS)

    Weymueller, C.R.

    1976-01-01

    Research activities at the NASA Lewis Research Center on materials and structures are discussed. Programs are noted on powder metallurgy superalloys, eutectic alloys, dispersion strengthened alloys and composite materials. Discussions are included on materials applications, coatings, fracture mechanics, and fatigue

  16. Research Investigation Directed Toward Extending the Useful Range of the Electromagnetic Spectrum. [atomic spectra and electronic structure of alkali metals

    Science.gov (United States)

    Hartmann, S. R.; Happer, W.

    1974-01-01

    The report discusses completed and proposed research in atomic and molecular physics conducted at the Columbia Radiation Laboratory from July 1972 to June 1973. Central topics described include the atomic spectra and electronic structure of alkali metals and helium, molecular microwave spectroscopy, the resonance physics of photon echoes in some solid state systems (including Raman echoes, superradiance, and two photon absorption), and liquid helium superfluidity.

  17. Investigations of nuclear structure and nuclear reactions induced by complex projectiles

    International Nuclear Information System (INIS)

    Sarantites, D.G.

    1991-01-01

    The research program of our group touches five areas of nuclear physics: (1) Nuclear structure studies at high spin; (2) Studies at the interface between structure and reactions; (3) Production and study of hot nuclei; (4) Incomplete fusion and fragmentation reactions; and (5) Development and use of novel techniques and instrumentation in the above areas of research. The papers from these areas are discussed in this report

  18. A sequential mixed methods research approach to investigating HIV ...

    African Journals Online (AJOL)

    Sequential mixed methods research is an effective approach for investigating complex problems, but it has not been extensively used in construction management research. In South Africa, the HIV/AIDS pandemic has seen construction management taking on a vital responsibility since the government called upon the ...

  19. Investigation of structural responses of breakwaters for green water based on fluid-structure interaction analysis

    Directory of Open Access Journals (Sweden)

    Chi-Seung Lee

    2012-06-01

    Full Text Available In the present study, the structural response of breakwaters installed on container carriers against green water impact loads was numerically investigated on the basis of the fluid-structure interaction analysis. A series of numerical studies is carried out to induce breakwater collapse under such conditions, whereby a widely accepted fluid-structure interaction analysis technique is adopted to realistically consider the phenomenon of green water impact loads. In addition, the structural behaviour of these breakwaters under green water impact loads is investigated simultaneously throughout the transient analysis. A verification study of the numerical results is performed using data from actual collapse incidents of breakwaters on container carriers. On the basis of the results of a series of numerical analyses, the pressure distribution of green water was accurately predicted with respect to wave mass and velocity. It is expected that the proposed analytical methodology and predicted pressure distribution could be used as a practical guideline for the design of breakwaters on container carriers.

  20. Industrial structure at research reactor suppliers

    International Nuclear Information System (INIS)

    Roegler, H.-J.; Bogusch, E.; Friebe, T.

    2001-01-01

    Due to the recent joining of the forces of Framatome S. A. from France and the Nuclear Division of Siemens AG Power Generation (KWU) from Germany to a Joint Venture named Framatome Advanced Nuclear Power S.A.S., the issue of the necessary and of the optimal industrial structure for nuclear projects as a research reactor is, was discussed internally often and intensively. That discussion took place also in the other technical fields such as Services for NPPs but also in the field of interest here, i. e. Research Reactors. In summarizing the statements of this presentation one can about state that: Research Reactors are easier to build than NPPs, but not standardised; Research Reactors need a wide spectrum of skills and experiences; to design and build Research Reactors needs an experienced team especially in terms of management and interfaces; Research Reactors need background from built reference plants more than from operating plants; Research Reactors need knowledge of suitable experienced subsuppliers. Two more essential conclusions as industry involved in constructing and upgrading research reactors are: Research Reactors by far are more than a suitable core that generates a high neutron flux; every institution that designs and builds a Research Reactor lacks quality or causes safety problems, damages the reputation of the entire community

  1. The Mars Pathfinder atmospheric structure investigation/meteorology (ASI/MET) experiment

    DEFF Research Database (Denmark)

    Schofield, J.T.; Barnes, J.R.; Crisp, D.

    1997-01-01

    The Mars Pathfinder atmospheric structure investigation/meteorology (ASI/MET) experiment measured the vertical density, pressure, and temperature structure of the martian atmosphere from the surface to 160 km, and monitored surface meteorology and climate for 83 sols (1 sol = 1 martian day = 24...

  2. Horonobe Underground Research Laboratory project. Synthesis of phase I investigation 2001-2005. Volume 'geoscientific research'

    International Nuclear Information System (INIS)

    Ota, Kunio; Abe, Hironobu; Kunimaru, Takanori

    2011-03-01

    The Horonobe Underground Research Laboratory (URL) Project is being pursued by the Japan Atomic Energy Agency (JAEA) to enhance the reliability of relevant disposal technologies through investigations of the deep geological environment within the host sedimentary formations at Horonobe in Hokkaido, northern Japan. The project consists of two major research areas, 'Geoscientific Research' and 'R and D on Geological Disposal', and proceeds in three overlapping phases, 'Phase I: Surface-based investigation', 'Phase II: Construction' and 'Phase III: Operation', over a period of 20 years. The present report summarises the results of the Phase I geoscientific research carried out from March 2001 to March 2005. Integration of the results from different disciplines ensures that the Phase I goals have been successfully achieved and identifies key issues that need to be addressed in Phases II and III. More importantly, efforts are made to summarise as many lessons learnt from the Phase I investigations and other technical achievements as possible to form a 'knowledge base' that will reinforce the technical basis for both implementation and the formulation of safety regulations. Based on experiences of selecting the URL area and site in Horonobe Town, important factors that should be taken into consideration in such selection processes and their rationale are demonstrated. In the course of stepwise surface-based investigations, a number of achievements have been made, which can eventually provide examples of integrated methodologies for characterising the sedimentary formations. The relevant surface-based investigation techniques have thus been further developed. The Horonobe URL has been designed based on geoscientific information accumulated during the surface-based investigations and the plans for safe construction and operation of the URL have been defined in a feasible manner. In addition, a variety of environmental measures taken during Phase I have proved to be

  3. Numerical Investigation on Vortex-Structure Interaction Generating Aerodynamic Noises for Rod-Airfoil Models

    Directory of Open Access Journals (Sweden)

    FeiFei Liu

    2017-01-01

    Full Text Available In past several decades, vortex-structure interaction generated aerodynamic noise became one of the main concerns in aircraft design. In order to understand the mechanism, the acoustic analogy method combined with the RANS-based nonlinear acoustics solver (NLAS is investigated. The numerical method is firstly evaluated by the experiment data of the classic rod-airfoil model. Compared with the traditional analogy methods, the RANS/NLAS can capture the nonlinear aerodynamic noise more accurately with lower gird requirements. Then different rod-airfoil configurations were simulated to investigate the aeroacoustic interaction effects. The numerical results are in good agreement with those of the earlier experimental research. It is found that the vortex-shedding crash to the airfoil is the main reason for the noise generation which is dependent on the configurations, distance, and flow conditions.

  4. Structural researches of carbonic fluid nanosystems

    International Nuclear Information System (INIS)

    Kyzyma, O.A.; Tomchuk, A.V.; Avdeev, M.V.; Tropin, T.V.; Aksenov, V.L.; Korobov, M.V.

    2015-01-01

    The results of researches concerning the cluster state in a number of disperse carbonic materials that are widely used in modern applications, including fullerenes and detonation nanodiamonds, are reported. With the help of the small-angle neutron scattering (SANS) method, some basic aspects of clustering in such systems are elucidated. At the same time, for the most effective and reliable description of a cluster structure under various conditions, a complex analysis involving complementary experimental and calculation techniques is applied. The experimental aspects of SANS applications are emphasized, and a qualitatively new idea of the structure of analyzed systems is formulated

  5. Materials and Structures Research for Gas Turbine Applications Within the NASA Subsonic Fixed Wing Project

    Science.gov (United States)

    Hurst, Janet

    2011-01-01

    A brief overview is presented of the current materials and structures research geared toward propulsion applications for NASA s Subsonic Fixed Wing Project one of four projects within the Fundamental Aeronautics Program of the NASA Aeronautics Research Mission Directorate. The Subsonic Fixed Wing (SFW) Project has selected challenging goals which anticipate an increasing emphasis on aviation s impact upon the global issue of environmental responsibility. These goals are greatly reduced noise, reduced emissions and reduced fuel consumption and address 25 to 30 years of technology development. Successful implementation of these demanding goals will require development of new materials and structural approaches within gas turbine propulsion technology. The Materials and Structures discipline, within the SFW project, comprise cross-cutting technologies ranging from basic investigations to component validation in laboratory environments. Material advances are teamed with innovative designs in a multidisciplinary approach with the resulting technology advances directed to promote the goals of reduced noise and emissions along with improved performance.

  6. Investigation of the structure of multiwall carbon nanotubes in polymer matrix

    International Nuclear Information System (INIS)

    Major, A Adamne; Belina, K

    2013-01-01

    In the last ten years carbon nanotube composites are in the focus of the researchers. Concentration series were prepared using carbon nanotube containing master blend by IDMX mixer. In the experiments polypropylene, polycarbonate and ABS polymers were used as matrix materials. The prepared materials were characterised by scanning electron microscopy. The carbon nanotubes can be seen on the fractured surfaces. We did not find any sign of agglomerates in the materials. The nanocomposites were investigated by LP-FTIR method. The specimens were irradiated with 1 W for 1 minute by CO 2 laser. The polymer matrix was burnt or charred by the CO 2 laser; the structure of the carbon nanotubes in the matrix was studied. The carbon nanotubes create a physical network in the polymers we used

  7. Recent progress in structural biology: lessons from our research history.

    Science.gov (United States)

    Nitta, Ryo; Imasaki, Tsuyoshi; Nitta, Eriko

    2018-05-16

    The recent 'resolution revolution' in structural analyses of cryo-electron microscopy (cryo-EM) has drastically changed the research strategy for structural biology. In addition to X-ray crystallography and nuclear magnetic resonance spectroscopy, cryo-EM has achieved the structural analysis of biological molecules at near-atomic resolution, resulting in the Nobel Prize in Chemistry 2017. The effect of this revolution has spread within the biology and medical science fields affecting everything from basic research to pharmaceutical development by visualizing atomic structure. As we have used cryo-EM as well as X-ray crystallography since 2000 to elucidate the molecular mechanisms of the fundamental phenomena in the cell, here we review our research history and summarize our findings. In the first half of the review, we describe the structural mechanisms of microtubule-based motility of molecular motor kinesin by using a joint cryo-EM and X-ray crystallography method. In the latter half, we summarize our structural studies on transcriptional regulation by X-ray crystallography of in vitro reconstitution of a multi-protein complex.

  8. Investigation of IFMIF target assembly structure design

    International Nuclear Information System (INIS)

    Ida, Mizuho; Nakamura, Hiroo; Sugimoto, Masayoshi; Yamamura, Toshio

    2006-10-01

    In the International Fusion Materials Irradiation Facility (IFMIF), the back-wall of target assembly is the part suffered the highest neutron-flux. The back-wall and the assembly are designed to have lips for cutting/welding at the back-wall replacement. To reduce thermal stress and deformation of the back-wall under neutron irradiation, contact pressure between the back-wall and the assembly is one of dominant factors. Therefore, an investigation was performed for feasible clamping pressure of a mechanical clamp set in limited space around the back-wall. It was clarified that the clamp can give a pressure difference up to 0.4 MPa between the contact pressure and atmosphere pressure in the test cell room. Also a research was performed for the dissimilar metal welding in the back-wall. Use of 309 steel was found adequate as the intermediate filler metal through the research of previous welding. Maintaining a temperature of the target assembly so as to avoid a freezing of liquid lithium is needed at the lithium charge into the loop before the beam injection. The assembly is covered with thermal insulation. Therefore, a research and an investigation were performed for compact and light thermal-insulation effective even under helium (i.e. high heat-conduction) condition of the test cell room. The result was as follows; in the case that a thermal conductivity 0.008 W/m·K of one of found insulation materials is available in the temperature range up to 300degC of the IFMIF target assembly, needed thickness and weight of the insulation were respectively only 8.2 mm and 32 kg. Also a research was performed for high-heat-density heaters to maintain temperature of the back-wall which can not be cover with insulation due to limited space. A heater made of silicon-nitride was found to be adequate. Total heat of 8.4 kW on the back-wall was found to be achievable through an investigations of heater arrange. Also an investigation was performed for remote-handling device to

  9. International seminar on structural investigations on pulsed neutron sources. Proceedings

    International Nuclear Information System (INIS)

    Aksenov, V.L.; Balagurov, A.M.; Taran, Yu.V.

    1993-01-01

    The proceedings of the International seminar on structural investigations using pulsed neutron sources are presented. The seminar is dedicated to the memory of Dr. Yu.M. Ostanevich, a world acknowledged physicist. The problems of structural analysis using pulsed neutron source at the IBR-2 reactor are discussed

  10. Guidelines for the Investigation of Mediating Variables in Business Research.

    Science.gov (United States)

    MacKinnon, David P; Coxe, Stefany; Baraldi, Amanda N

    2012-03-01

    Business theories often specify the mediating mechanisms by which a predictor variable affects an outcome variable. In the last 30 years, investigations of mediating processes have become more widespread with corresponding developments in statistical methods to conduct these tests. The purpose of this article is to provide guidelines for mediation studies by focusing on decisions made prior to the research study that affect the clarity of conclusions from a mediation study, the statistical models for mediation analysis, and methods to improve interpretation of mediation results after the research study. Throughout this article, the importance of a program of experimental and observational research for investigating mediating mechanisms is emphasized.

  11. SAXS and TEM Investigation of Bentonite Structure

    International Nuclear Information System (INIS)

    Matusewicz, Michal; Liljestroem, Ville; Muurinen, Arto; Serimaa, Ritva

    2013-01-01

    A preliminary investigation of bentonite structure using Small-Angle X-ray Scattering (SAXS) and Transmission Electron Microscopy (TEM) is presented. Three types of clay were used: unchanged MX-80 bentonite and purified clays with sodium or calcium ions. Quantitative information in nano-scale - basal spacing, mean crystallite size - was obtained from SAXS, which was complemented by TEM to give qualitative information from micron to nanometre scale. SAXS seems to be a more reliable source of quantitative data than TEM. SAXS gives the averaged information about basal spacing. TEM in this study gives more qualitative information, but in a greater resolution range. The presented work is a starting point to combine more methods to obtain a better idea of bentonite structure. (authors)

  12. Structural Metadata Research in the Ears Program

    National Research Council Canada - National Science Library

    Liu, Yang; Shriberg, Elizabeth; Stolcke, Andreas; Peskin, Barbara; Ang, Jeremy; Hillard, Dustin; Ostendorf, Mari; Tomalin, Marcus; Woodland, Phil; Harper, Mary

    2005-01-01

    Both human and automatic processing of speech require recognition of more than just words. In this paper we provide a brief overview of research on structural metadata extraction in the DARPA EARS rich transcription program...

  13. Structuration theory:reflections on its further potential for management accounting research

    OpenAIRE

    Coad, Alan; Jack, Lisa; Kholeif, Ahmed Othman Rashwan

    2015-01-01

    Purpose – This paper aims to examine the potential of strong structuration theory in management accounting research. Design/methodology/approach – The paper explains how the ontological perspective of strong structuration theory extends the work of Giddens and explores how the perspective overcomes a number of the limitations of existing management accounting research based on structuration theory. Findings – Strong structuration theory develops and extends the work of Giddens, providing grea...

  14. Research leadership and investigators: gender distribution in the federal government.

    Science.gov (United States)

    McCarren, Madeline; Goldman, Steven

    2012-08-01

    The National Academies reported in Beyond Bias and Barriers: Fulfilling the Potential of Women in Academic Science and Engineering (2006) that "women are very likely to face discrimination." In academic medicine, gender distribution is becoming more balanced. In the federal government, women also have made progress, doubling their representation in professional positions to 44%. The Department of Veterans Affairs (VA) has a research program and a mission to train health care professionals; however, its gender distribution has not been described. We conducted a descriptive study using public data for positions in the VA, National Institutes of Health (NIH), and Agency for Healthcare Research and Quality (AHRQ). We followed with a case-control analysis of predictors of receipt of grant funding in the VA. Participants were 224 leadership positions and 132 principal investigators. Women comprised 33% (AHRQ), 27% (NIH), and 0% (VA) of the top research leadership. Across all VA research levels, women comprised 45% to 0%, depending on the service. In the case-control analysis of principal investigators, men had greater odds (odds ratio 8.0) of a Cooperative Studies Program (CSP) trial award. History of first, last, or any authorship on a clinical trial publication in the 10 years before the index trial was only weakly associated with award of a CSP trial. The gender imbalance was not explained by publication history. Marked gender disparities were seen in the VA, except in Health Services Research. Organizations must investigate their practices to reveal disparities, investigate underlying factors, and intervene as needed. Published by Elsevier Inc.

  15. Structural stigma: Research evidence and implications for psychological science.

    Science.gov (United States)

    Hatzenbuehler, Mark L

    2016-11-01

    Psychological research has provided essential insights into how stigma operates to disadvantage those who are targeted by it. At the same time, stigma research has been criticized for being too focused on the perceptions of stigmatized individuals and on microlevel interactions, rather than attending to structural forms of stigma. This article describes the relatively new field of research on structural stigma, which is defined as societal-level conditions, cultural norms, and institutional policies that constrain the opportunities, resources, and well-being of the stigmatized. I review emerging evidence that structural stigma related to mental illness and sexual orientation (a) exerts direct and synergistic effects on stigma processes that have long been the focus of psychological inquiry (e.g., concealment, rejection sensitivity), (b) serves as a contextual moderator of the efficacy of psychological interventions, and (c) contributes to numerous adverse health outcomes for members of stigmatized groups-ranging from dysregulated physiological stress responses to premature mortality-indicating that structural stigma represents an underrecognized mechanism producing health inequalities. Each of these pieces of evidence suggests that structural stigma is relevant to psychology and therefore deserves the attention of psychological scientists interested in understanding and ultimately reducing the negative effects of stigma. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  16. Expedition Earth and Beyond: Student Scientist Guidebook. Model Research Investigation

    Science.gov (United States)

    Graff, Paige Valderrama

    2009-01-01

    The Expedition Earth and Beyond Student Scientist Guidebook is designed to help student researchers model the process of science and conduct a research investigation. The Table of Contents listed outlines the steps included in this guidebook

  17. North Carolina State University Nuclear Structure Research at the Triangle Universities Nuclear Laboratory. Progress report

    International Nuclear Information System (INIS)

    Seagondollar, L.W.; Waltner, A.W.; Mitchell, G.E.; Tilley, D.R.; Gould, C.R.

    1975-01-01

    A summary is presented of nuclear structure research completed at the Triangle Universities Nuclear Lab for the period 9/1/74 to 8/31/75. Included are abstracts and titles for studies of electromagnetic transitions in low-medium mass nuclei, high resolution studies, accelerator induced x-ray investigations, and energy related neutron and charged particle cross section measurements. (U.S.)

  18. Investigator Bias and Theory-Ladenness in Cross-Cultural Research: Insights from Wittgenstein

    Science.gov (United States)

    Tan, Charlene

    2016-01-01

    A relatively under-explored topic in the current literature on and methods for research in the field of comparative and international education is the problem of investigator bias in cross-cultural research. This article discusses the nature of and an approach to address investigator bias in research that originates from the theory-ladenness of…

  19. Structural investigation of semi-conductor nanostructures by x-ray diffraction

    International Nuclear Information System (INIS)

    Stangl, J.

    2003-01-01

    Full text: Semiconductor nanostructures present a topic of increasing interest due to their potential for new device concepts, as well as from a scientific point of view. In structures with dimensions smaller than the DeBroglie wavelength of electrons or holes, quantum confinement effects determine the electronic and optical properties. For the understanding of such structures, their structural investigation, i.e., the determination of size, shape, chemical composition and strain state is mandatory. X-ray diffraction is a powerful technique for this purpose. In particular, the strain fields within nanostructures as well as in the surrounding matrix can be determined with high precision. Using synchrotron radiation sources, also the distribution of chemical composition within objects with typically several nm height and 10 to 100 nm width can be established. With x-ray diffraction, the non-destructive investigation of uncapped and buried structures is possible. The latter is important, as for applications buried structures are needed, and during capping the structural properties may change considerably. Here, we will focus on so-called self-assembled nanostructures, which form during the deposition of different semiconductors on top of each other. In contrast to structures etched after growth of planar layers, self organized islands or wires are virtually defect-free and hence promising for applications. Different scattering techniques sensitive to shape and/or composition and strain will be discussed. (author)

  20. FTIR of binary lead borate glass: Structural investigation

    Science.gov (United States)

    Othman, H. A.; Elkholy, H. S.; Hager, I. Z.

    2016-02-01

    The glass samples were prepared according to the following formula: (100-x) B2O3 - x PbO, where x = 20-80 mol% by melt quenching method. The density of the prepared samples was measured and molar volume was calculated. IR spectra were measured for the prepared samples to investigate the glass structure. The IR spectra were deconvoluted using curves of Gaussian shape at approximately the same frequencies. The deconvoluted data were used to study the effect of PbO content on all the structural borate groups. Some structural parameters such as density, packing density, bond length and bond force constant were theoretically calculated and were compared to the obtained experimental results. Deviation between the experimental and theoretically calculated parameters reflects the dual role of PbO content on the network of borate glass.

  1. Office of Naval Research: Solid and Structural Mechanics

    DEFF Research Database (Denmark)

    Belytschenko, T.; Murphy, W.P.; Bernitsas, M.M.

    1997-01-01

    The goal of this report is to pursue a new paradigm for basic research in Solid and Structural Mechanics in order to serve the needs of the Navy of the 21st century. The framework for the report was established through meetings of the committee with Navy engineers and Office of Naval Research...

  2. Investigation of interfacial wave structure using time-series analysis techniques

    International Nuclear Information System (INIS)

    Jayanti, S.; Hewitt, G.F.; Cliffe, K.A.

    1990-09-01

    The report presents an investigation into the interfacial structure in horizontal annular flow using spectral and time-series analysis techniques. Film thickness measured using conductance probes shows an interesting transition in wave pattern from a continuous low-frequency wave pattern to an intermittent, high-frequency one. From the autospectral density function of the film thickness, it appears that this transition is caused by the breaking up of long waves into smaller ones. To investigate the possibility of the wave structure being represented as a low order chaotic system, phase portraits of the time series were constructed using the technique developed by Broomhead and co-workers (1986, 1987 and 1989). These showed a banded structure when waves of relatively high frequency were filtered out. Although these results are encouraging, further work is needed to characterise the attractor. (Author)

  3. Community-oriented support and research structures

    Energy Technology Data Exchange (ETDEWEB)

    Attig, Norbert; Eickermann, Thomas; Gibbon, Paul; Lippert, Thomas, E-mail: th.lippert@fz-juelich.d [Institute for Advanced Simulation, Juelich Supercomputing Centre, Forschungszentrum Juelich, 52425 Juelich (Germany)

    2009-07-01

    Coordinated by the Partnership for Advanced Computing in Europe (PRACE) Europe is restructuring and strengthening its high-performance computing infrastructure with the aim to create a model HPC ecosystem. At the tip of the pyramid, up to six centres are envisaged that will operate systems of the highest performance class. The HPC Research Infrastructure (HPC-RI) will comprise European, national and regional centres. Science communities are integral partners, strong links will include Grid and Cloud users. The HPC-RI strives at providing scientists all over Europe, on the one hand, with unlimited and independent access to state-of-the-art computer resources in all performance classes and, on the other hand, with a world-class pan-European competence and support network. While the hardware-oriented buildup of the infrastructure is making progress, high-quality user support and software development in the upcoming era of unprecedented parallelism and exascale on the horizon have become the imminent challenges. This has been clearly recognized by the European Commission, who will issue calls for proposals to fund petascale software development in summer 2009. Although traditional support structures are well established in Europe's major supercomputing centres, it is questionable if these structures are able to meet the challenges of the future: in general, support structures are based on cross-disciplinary computer science and mathematics teams; disciplinary computational science support usually is given in an ad-hoc, project-oriented manner. In this paper, we describe our approach to establish a suitable support structure-Simulation Laboratories (SL). SLs are currently being established at the Juelich Supercomputing Centre of the Forschungszentrum Juelich (FZJ) and at the Steinbuch Centre for Computing (SCC) of the Karlsruhe Institute for Technology (KIT) in Germany. While SLs are community-oriented, i.e. each SL focusses on a specific community, they are

  4. Community-oriented support and research structures

    International Nuclear Information System (INIS)

    Attig, Norbert; Eickermann, Thomas; Gibbon, Paul; Lippert, Thomas

    2009-01-01

    Coordinated by the Partnership for Advanced Computing in Europe (PRACE) Europe is restructuring and strengthening its high-performance computing infrastructure with the aim to create a model HPC ecosystem. At the tip of the pyramid, up to six centres are envisaged that will operate systems of the highest performance class. The HPC Research Infrastructure (HPC-RI) will comprise European, national and regional centres. Science communities are integral partners, strong links will include Grid and Cloud users. The HPC-RI strives at providing scientists all over Europe, on the one hand, with unlimited and independent access to state-of-the-art computer resources in all performance classes and, on the other hand, with a world-class pan-European competence and support network. While the hardware-oriented buildup of the infrastructure is making progress, high-quality user support and software development in the upcoming era of unprecedented parallelism and exascale on the horizon have become the imminent challenges. This has been clearly recognized by the European Commission, who will issue calls for proposals to fund petascale software development in summer 2009. Although traditional support structures are well established in Europe's major supercomputing centres, it is questionable if these structures are able to meet the challenges of the future: in general, support structures are based on cross-disciplinary computer science and mathematics teams; disciplinary computational science support usually is given in an ad-hoc, project-oriented manner. In this paper, we describe our approach to establish a suitable support structure-Simulation Laboratories (SL). SLs are currently being established at the Juelich Supercomputing Centre of the Forschungszentrum Juelich (FZJ) and at the Steinbuch Centre for Computing (SCC) of the Karlsruhe Institute for Technology (KIT) in Germany. While SLs are community-oriented, i.e. each SL focusses on a specific community, they are structured

  5. A framework to explore the knowledge structure of multidisciplinary research fields.

    Science.gov (United States)

    Uddin, Shahadat; Khan, Arif; Baur, Louise A

    2015-01-01

    Understanding emerging areas of a multidisciplinary research field is crucial for researchers, policymakers and other stakeholders. For them a knowledge structure based on longitudinal bibliographic data can be an effective instrument. But with the vast amount of available online information it is often hard to understand the knowledge structure for data. In this paper, we present a novel approach for retrieving online bibliographic data and propose a framework for exploring knowledge structure. We also present several longitudinal analyses to interpret and visualize the last 20 years of published obesity research data.

  6. The research rotation: competency-based structured and novel approach to research training of internal medicine residents

    Directory of Open Access Journals (Sweden)

    Dimitrov Vihren

    2006-10-01

    Full Text Available Abstract Background In the United States, the Accreditation Council of graduate medical education (ACGME requires all accredited Internal medicine residency training programs to facilitate resident scholarly activities. However, clinical experience and medical education still remain the main focus of graduate medical education in many Internal Medicine (IM residency-training programs. Left to design the structure, process and outcome evaluation of the ACGME research requirement, residency-training programs are faced with numerous barriers. Many residency programs report having been cited by the ACGME residency review committee in IM for lack of scholarly activity by residents. Methods We would like to share our experience at Lincoln Hospital, an affiliate of Weill Medical College Cornell University New York, in designing and implementing a successful structured research curriculum based on ACGME competencies taught during a dedicated "research rotation". Results Since the inception of the research rotation in 2004, participation of our residents among scholarly activities has substantially increased. Our residents increasingly believe and appreciate that research is an integral component of residency training and essential for practice of medicine. Conclusion Internal medicine residents' outlook in research can be significantly improved using a research curriculum offered through a structured and dedicated research rotation. This is exemplified by the improvement noted in resident satisfaction, their participation in scholarly activities and resident research outcomes since the inception of the research rotation in our internal medicine training program.

  7. High-resolution EELS investigation of the electronic structure of ilmenites

    NARCIS (Netherlands)

    Radtke, G.; Lazar, S.; Botton, G.A.

    2006-01-01

    The electronic structure of a series of compounds belonging to the ilmenite family is investigated using high resolution electron energy loss spectroscopy (EELS). The energy loss near edge structure (ELNES) of the O-K, Ti-L23 and transition metal L23 edges have been recorded in MnTiO3, FeTiO3,

  8. X-ray detectors for structure investigations constructed at JINR

    Energy Technology Data Exchange (ETDEWEB)

    Chernenko, S P [LHE Joint Institute for Nuclear Research, 141980 Dubna (Russian Federation); Cheremukhina, G A [LHE Joint Institute for Nuclear Research, 141980 Dubna (Russian Federation); Fateev, O V [LHE Joint Institute for Nuclear Research, 141980 Dubna (Russian Federation); Smykov, L P [LHE Joint Institute for Nuclear Research, 141980 Dubna (Russian Federation); Vasiliev, S E [LHE Joint Institute for Nuclear Research, 141980 Dubna (Russian Federation); Zanevsky, Yu V [LHE Joint Institute for Nuclear Research, 141980 Dubna (Russian Federation); Kheiker, D M [Institute of Crystallography, Leninsky prosp. 59, 117333 Moscow (Russian Federation); Popov, A N [Institute of Crystallography, Leninsky prosp. 59, 117333 Moscow (Russian Federation)

    1994-09-01

    The performance characteristics of a few high resolution position-sensitive detectors constructed at JINR are presented. The detectors supplied with original software operate with an IBM PC/AT. One of these devices has been succesfully applied for protein molecule structure investigations and the other for studies of the structure-forming process during combustion. The preliminary parameters of the high count rate MWPC with parallel electronics and the testing results of the microstrip detector are given. ((orig.))

  9. Searching for qualitative research for inclusion in systematic reviews: a structured methodological review.

    Science.gov (United States)

    Booth, Andrew

    2016-05-04

    Qualitative systematic reviews or qualitative evidence syntheses (QES) are increasingly recognised as a way to enhance the value of systematic reviews (SRs) of clinical trials. They can explain the mechanisms by which interventions, evaluated within trials, might achieve their effect. They can investigate differences in effects between different population groups. They can identify which outcomes are most important to patients, carers, health professionals and other stakeholders. QES can explore the impact of acceptance, feasibility, meaningfulness and implementation-related factors within a real world setting and thus contribute to the design and further refinement of future interventions. To produce valid, reliable and meaningful QES requires systematic identification of relevant qualitative evidence. Although the methodologies of QES, including methods for information retrieval, are well-documented, little empirical evidence exists to inform their conduct and reporting. This structured methodological overview examines papers on searching for qualitative research identified from the Cochrane Qualitative and Implementation Methods Group Methodology Register and from citation searches of 15 key papers. A single reviewer reviewed 1299 references. Papers reporting methodological guidance, use of innovative methodologies or empirical studies of retrieval methods were categorised under eight topical headings: overviews and methodological guidance, sampling, sources, structured questions, search procedures, search strategies and filters, supplementary strategies and standards. This structured overview presents a contemporaneous view of information retrieval for qualitative research and identifies a future research agenda. This review concludes that poor empirical evidence underpins current information practice in information retrieval of qualitative research. A trend towards improved transparency of search methods and further evaluation of key search procedures offers

  10. Horonobe Underground Research Laboratory Project. Plans for surface-based investigations. Phase 1

    International Nuclear Information System (INIS)

    Goto, Junichi; Hama, Katsuhiro

    2003-10-01

    The Horonobe Underground Research Laboratory Project is an investigation project which is planned over 20 years. The investigations are conducted in the three phases: investigations from surface (Phase 1), investigations during construction of the underground facility (Phase 2) and investigations using the facility (Phase 3). Taking into account the results from 'H12: Project of Establish the Scientific and Technical Basis for HLW Disposal in Japan - Second Progress Report on Research and Development for the Geological Disposal of HLW in Japan-' (JNC, 2000), research and development goals for the Horonobe URL project were re-defined as follows; a) Development of investigation technologies for the geological environment, b) Development of monitoring technologies for the geological environment, c) Study on the long-term stability of the geological environment, d) Development of the basis for engineering technologies in deep underground, e) Verification of technologies for engineered barriers, f) Development of detailed designing technologies of the repositories, and g) Improvement of safety assessment methodologies. Investigations for the goals a) to d) and e) to g) are conducted in the 'Geoscientific Research' and 'Research and Development on Geological Disposal', respectively. In Phase 1, a 'laboratory construction area' of a few kilometers square is selected based on the results from early stage investigations. Subsequent investigations are concentrated in the selected area and its periphery. Acquisition of data by surface-based investigations, modeling of the geological environment and predictions of changes in the geological environment caused by the construction of the underground facility, are conducted in a) Development of investigation technologies for the geological environment. Development and installation of monitoring equipments and data acquisition prior to the construction of the underground facility fall under b) Development of monitoring technologies

  11. Numerical Investigation of Size and Structure Effect on Tensile Characteristics of Symmetric and Asymmetric CNTs

    Directory of Open Access Journals (Sweden)

    Mahnaz Zakeri

    2016-06-01

    Full Text Available In this research, the influence of structure on the tensile properties of single- walled carbon nanotubes (CNTs is evaluated using molecular mechanics technique and finite element method. The effects of diameter, length and chiral angle on elastic modulus and Poisson’s ratio of armchair, zigzag and chiral structures are investigated. To simulate the CNTs, a 3D FEM code is developed using the ANSYS commercial software. Considering the carbon-carbon covalent bonds as connecting load-carrying beam elements, and the atoms as joints of the elements, CNTs are simulated as space-frame structures. The atomic potentials are estimated using harmonic simple functions. The numerical results show that by increasing the diameter and length to a certain amount, the size effect on tensile behavior of modeled nanotubes is omitted. In fact, for nanotubes with diameter over 2 nm and length over 36.5 nm the chiral angle is the only effective factor on the tensile properties. Also, it is found that the structure has a little effect on the elasticity modulus, which is about 4%. However, Poisson’s ratio can be affected significantly with chiral angle. Asymmetric structures with angles θ

  12. Nuclear magnetic resonance structure investigations on crosslinked polyesters

    International Nuclear Information System (INIS)

    Grobelny, J.

    1999-01-01

    Styrene-crosslinked mixed polyesters derived from maleic anhydride, 2,2-di(4-hydroxypropoxyphenyl)propane, oligo(propylene oxide) and 1,2-propylene glycol were investigated by high-resolution solid-state 13 C NMR spectroscopy. The structural modifications accompanying crosslinking were characterized in terms of spin-lattice relaxation times as a function of unsaturated polyester composition. Copolymerization and crosslinking effects were individually evaluated and the latter effect was related to variations in crosslinking density associated with the chemical structure of the unsaturated prepolymer. As the crosslinking effect is suppressed, the mechanical properties undergo expected changes, e.g., impact strength is increased and modulus of elasticity in tension is decreased. (author)

  13. How to survive in research: advice for the novice investigator.

    Science.gov (United States)

    Siskind, Dan; Parker, Stephen; Loi, Samantha; Looi, Jeffrey C; Macfarlane, Matthew D; Merry, Sally; Smith, Geoff; Kisely, Steve

    2015-02-01

    This paper, written by the RANZCP Committee for Research, provides an outline for how to survive in research, considering the ingredients likely to contribute to success, the role of supportive structures and the expected challenges. Learning how to survive in research is relevant for both trainees and for Fellows undertaking research at any stage of their career. Intellectual curiosity, perseverance, frustration tolerance, patience and humility are key for success as a researcher. Selection of the right supervisor is important, as is development and maintenance of a good working supervisor/supervisee relationship. The personal benefits of undertaking research include flexibility in work hours, and improved skills in writing, oral presentations, objectivity, critical thinking, problem solving and project management. © The Royal Australian and New Zealand College of Psychiatrists 2014.

  14. Investigation of post-svecofennian brittle structures in Satakunta. Field report 2009

    International Nuclear Information System (INIS)

    Pajunen, M.; Wennerstroem, M.

    2010-09-01

    This report describes the field work in the summer 2009. The task is a part of research entity in which the development of brittle structures in bedrock are acquired. In focus have been the post-Svecofennian rocks of the Satakunta area: rapakivi, sandstone and olivine diabase. We describe the observation methods and the research methods using three target examples: olivine diabase in Pori, Kallo, sandstone in Nakkila, Leistilaenjaervi and rapakivi in the centre of Lappi. We have concentrated on geometry and kinematics of joints in bedrock. Concerning every target we describe the joints and the faults, their orientations and properties, joint fabrics and jointing structures. Our aim is to define orientations of palaeostresses and evolution of brittle structures exploiting joint properties. The study will be continued in Satakunta based on the data collected in the summer 2009 and in a few earlier years. The results can be benefitted also in studies of the Svecofennian brittle structures. (orig.)

  15. Investigation of the structure of filter cakes from bore flushing

    Energy Technology Data Exchange (ETDEWEB)

    Hartmann, A; Oezerler, M; Marx, C; Hartmann, A; Oezerler, M; Marx, C; Poege, S; Young, F

    1985-01-01

    After a description of the tasks and functions of the filter cake in bores, the requirements for filter cakes are explained. The aim of the investigation is finding a correlation between the filter cake structures and the prehistory of flushing. The technique of preparing the samples and previous results from investigations with electron microscopes are introduced and discussed.

  16. Investigation of Inner Loop Flight Control Strategies for High-Speed Research

    Science.gov (United States)

    Newman, Brett; Kassem, Ayman

    1999-01-01

    This report describes the activities and findings conducted under contract NAS1-19858 with NASA Langley Research Center. Subject matter is the investigation of suitable flight control design methodologies and solutions for large, flexible high-speed vehicles. Specifically, methodologies are to address the inner control loops used for stabilization and augmentation of a highly coupled airframe system possibly involving rigid-body motion, structural vibrations, unsteady aerodynamics, and actuator dynamics. Techniques considered in this body of work are primarily conventional-based, and the vehicle of interest is the High-Speed Civil Transport (HSCT). Major findings include 1) current aeroelastic vehicle modeling procedures require further emphasis and refinement, 2) traditional and nontraditional inner loop flight control strategies employing a single feedback loop do not appear sufficient for highly flexible HSCT class vehicles, 3) inner loop flight control systems will, in all likelihood, require multiple interacting feedback loops, and 4) Ref. H HSCT configuration presents major challenges to designing acceptable closed-loop flight dynamics.

  17. High-temperature-structural design and research and development for reactor system components

    International Nuclear Information System (INIS)

    Matsumura, Makoto; Hada, Mikio

    1985-01-01

    The design of reactor system components requires high-temperature-structural design guide with the consideration of the creep effect of materials related to research and development on structural design. The high-temperature-structural design guideline for the fast prototype reactor MONJU has been developed under the active leadership by Power Reactor and Nuclear Fuel Development Corporation and Toshiba has actively participated to this work with responsibility on in-vessel components, performing research and development programs. This paper reports the current status of high-temperature-structural-design-oriented research and development programs and development of analytical system including stress-evaluation program. (author)

  18. Structured methods for customer-oriented innovation research

    DEFF Research Database (Denmark)

    Scholderer, Joachim

    customers might have told them if they had only properly been asked beforehand. In the following, a short introduction will be given to structured research methods that are relatively easy to use and can help product developers prioritise their efforts and assess the market potential of innovative concepts....

  19. MICRO-STRUCTURAL INVESTIGATION OF SOME ARTIFACTS DISCOVERED AT POROLISSUM

    Directory of Open Access Journals (Sweden)

    MUNTEANU Mihai

    2014-09-01

    Full Text Available the paper presents the investigation of two fragments of roman bronze artefacts, discovered during archaeological works performed at Porolissum, an important military and economical point on the northern limes of Dacia Province. One of the analyzed fragments (Mi1 was taken from a consistent fragment of a Roman bronze statue, while the second (Mi2 was among a lot of small metal pieces, discovered in the same investigated area. Using highly sophisticated micro-structural analysing techniques – X-Ray diffraction, the paper investigates the possibility that the Mi2 fragment may have belonged to the same statue from which the sample Mi1 was taken

  20. Leading research report for fiscal 1998. Research and study of 3-dimensional cell structure module engineering; 1998 nendo sendo chosa kenkyu hokokusho. Sanjigen saibo soshiki module kogaku chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For the formation of cellular tissues to replace bionic tissues, researches were conducted about technologies of forming bionic tissue modules by culturing various kinds of cells. As for the materials and methods for constructing cellular tissues, researches were conducted about the trends of research and development of 3-dimensional tissue culturing matrices and materials for micromanipulation. As for the development of technologies for the functionalization of 3-dimensionally structured cells, research and study were conducted about the technology of 3-dimensional cell structure organization through application of physical stimulation, the biochemical technology of differentiation inducing, and the differentiation inducing technology for hetero tissue culturing. As for the development of technologies for evaluation using 3-dimensionally structured cells, light CT (computer tomography), analysis and evaluation using spectroscopy and the like, feasibility of the biochemical analysis of the cell state using biosensors, technologies for measuring the secretion of carcinogenic and toxic substances, etc., were studied. In addition, the development of organic models to replace test animals, industrial evolution of 3-dimensional tissue module engineering, etc., were investigated. (NEDO)

  1. Local atomic structure of Zr-Cu and Zr-Cu-Al amorphous alloys investigated by EXAFS method

    International Nuclear Information System (INIS)

    Antonowicz, J.; Pietnoczka, A.; Zalewski, W.; Bacewicz, R.; Stoica, M.; Georgarakis, K.; Yavari, A.R.

    2011-01-01

    Research highlights: → Coordination number, interatomic distances and mean square atomic displacement in Zr-Cu and Zr-Cu-Al glasses. → Icosahedral symmetry in local atomic structure. → Deviation from random mixing behavior resulting from Al addition. - Abstract: We report on extended X-ray absorption fine structure (EXAFS) study of rapidly quenched Zr-Cu and Zr-Cu-Al glassy alloys. The local atomic order around Zr and Cu atoms was investigated. From the EXAFS data fitting the values of coordination number, interatomic distances and mean square atomic displacement were obtained for wide range of compositions. It was found that icosahedral symmetry rather than that of corresponding crystalline analogs dominates in the local atomic structure of Zr-Cu and Zr-Cu-Al amorphous alloys. Judging from bonding preferences we conclude that addition of Al as an alloying element results in considerable deviation from random mixing behavior observed in binary Zr-Cu alloys.

  2. A Structural Equation Modeling Approach to Investigate Negative Word of Mouth Impact on Customer-Based Brand Equity: Does Attribution Matter?

    Directory of Open Access Journals (Sweden)

    Ahmed Yehia Ebeid

    2014-09-01

    Full Text Available There is a shortage in the research which addresses the relationship between negative word of mouth (WOM communication and customer-based brand equity dilution. This research utilizes attribution theory to demonstrate the negative word-of-mouth impact on the customer-based brand equity. Structural equation modeling was used to investigate the proposed effect of negative WOM on brand equity. The study sample consists of 71 post-graduate students, the object of negative WOM was laptops which considered a highly involvement product. Experimental investigation results reveal that customer exposure to negative word-of-mouth increases the brand equity dilution. Results were discussed in the light of casual attribution theory, and practical implications were provided.

  3. 2011 Plant Lipids: Structure, Metabolism, & Function Gordon Research Conference

    Energy Technology Data Exchange (ETDEWEB)

    Christopher Benning

    2011-02-04

    This is the second Gordon Research Conference on 'Plant Lipids: Structure, Metabolism & Function'. It covers current topics in lipid structure, metabolism and function in eukaryotic photosynthetic organisms including seed plants, algae, mosses and ferns. Work in photosynthetic bacteria is considered as well as it serves the understanding of specific aspects of lipid metabolism in plants. Breakthroughs are discussed in research on plant lipids as diverse as glycerolipids, sphingolipids, lipids of the cell surface, isoprenoids, fatty acids and their derivatives. The program covers nine concepts at the forefront of research under which afore mentioned plant lipid classes are discussed. The goal is to integrate areas such as lipid signaling, basic lipid metabolism, membrane function, lipid analysis, and lipid engineering to achieve a high level of stimulating interaction among diverse researchers with interests in plant lipids. One Emphasis is on the dynamics and regulation of lipid metabolism during plant cell development and in response to environmental factors.

  4. Quantitative Investigations in Hungarian Phonotactics and Syllable Structure

    Science.gov (United States)

    Grimes, Stephen M.

    2010-01-01

    This dissertation investigates statistical properties of segment collocation and syllable geometry of the Hungarian language. A corpus and dictionary based approach to studying language phonologies is outlined. In order to conduct research on Hungarian, a phonological lexicon was created by compiling existing dictionaries and corpora and using a…

  5. Applications of Multilevel Structural Equation Modeling to Cross-Cultural Research

    Science.gov (United States)

    Cheung, Mike W.-L.; Au, Kevin

    2005-01-01

    Multilevel structural equation modeling (MSEM) has been proposed as an extension to structural equation modeling for analyzing data with nested structure. We have begun to see a few applications in cross-cultural research in which MSEM fits well as the statistical model. However, given that cross-cultural studies can only afford collecting data…

  6. Ageing investigation and upgrading of components/systems of Kartini research reactor

    Energy Technology Data Exchange (ETDEWEB)

    Syarip,; Setiawan, Widi [Yogyakarta Nuclear Research Centre, Yogyakarta (Indonesia)

    1998-10-01

    Kartini research reactor has been operated in good condition and has demonstrated successful operation for the past 18 years, utilized for: reactor kinetic and control studies, instrumentation tests, neutronic and thermohydraulic studies, routine neutron activation analysis, reactor safety studies, training for research reactor operators and supervisors, and reactor physics experiments. Several components of Kartini reactor use components from the abandoned IRT-2000 Project at Serpong and from Bandung Reactor Centre such as: reactor tank, reactor core, heat exchanger, motor blower for ventilation system, fuel elements, etc. To maintain a good operating performance and also for aging investigation purposes, the component failure data collection has been done. The method used is based on the Manual on Reliability Data Collection For Research Reactor PSAs, IAEA TECDOC 636, and analyzed by using Data Entry System (DES) computer code. Analysis result shows that the components/systems failure rate of Kartini reactor is around 1,5.10{sup -4} up to 2,8.10{sup -4} per hour, these values are within the ranges of the values indicated in IAEA TECDOC 478. Whereas from the analysis of irradiation history shows that the neutron fluence of fuel element with highest burn-up (2,05 gram U-235 in average) is around 1.04.10{sup 16} n Cm{sup -2} and this value is still far below its limiting value. Some reactor components/systems have been replaced and upgraded such as heat exchanger, instrumentation and control system (ICS), etc. The new reactor ICS was installed in 1994 which is designed as a distributed structure by using microprocessor based systems and bus system technology. The characteristic and operating performance of the new reactor ICS, as well as the operation history and improvement of the Kartini research reactor is presented. (J.P.N.)

  7. Autonomy and Authority in Public Research Organisations: Structure and Funding Factors.

    Science.gov (United States)

    Cruz-Castro, Laura; Sanz-Menéndez, Luis

    2018-01-01

    This paper establishes a structural typology of the organisational configurations of public research organisations which vary in their relative internal sharing of authority between researchers and managers; we distinguish between autonomous, heteronomous and managed research organisations. We assume that there are at least two sources of legitimate authority within research organisations, one derived from formal hierarchy (organisational leadership) and another derived from the research community (professional); the balance of authority between researchers and managers is essentially structural but is empirically mediated by the funding portfolio of organisations and the corresponding endowment of resources at the disposal of leaders or researchers. Changes in the level, sources and strings of organisational and individual research funding are expected to affect the balance of internal authority in different ways depending on the organisational configuration, and to open the door to the influence of external actors in the development of research agendas.

  8. Training physician investigators in medicine and public health research.

    Science.gov (United States)

    Gourevitch, Marc N; Jay, Melanie R; Goldfrank, Lewis R; Mendelsohn, Alan L; Dreyer, Benard P; Foltin, George L; Lipkin, Mack; Schwartz, Mark D

    2012-07-01

    We have described and evaluated the impact of a unique fellowship program designed to train postdoctoral, physician fellows in research at the interface of medicine and public health. We developed a rigorous curriculum in public health content and research methods and fostered linkages with research mentors and local public health agencies. Didactic training provided the foundation for fellows' mentored research initiatives, which addressed real-world challenges in advancing the health status of vulnerable urban populations. Two multidisciplinary cohorts (6 per cohort) completed this 2-year degree-granting program and engaged in diverse public health research initiatives on topics such as improving pediatric care outcomes through health literacy interventions, reducing hospital readmission rates among urban poor with multiple comorbidities, increasing cancer screening uptake, and broadening the reach of addiction screening and intervention. The majority of fellows (10/12) published their fellowship work and currently have a career focused in public health-related research or practice (9/12). A fellowship training program can prepare physician investigators for research careers that bridge the divide between medicine and public health.

  9. In situ research and investigations in OECD countries

    International Nuclear Information System (INIS)

    1988-01-01

    This report explains why deep geological disposal is the most favoured option for the disposal of high level waste and spent fuel, as well as some alpha bearing wastes. It also gives an overview of the main aim and elements of in-situ research and investigation activities in OECD countries, as well as of initiatives taken at an international level

  10. An investigation on vulnerability assessment of steel structures with thin steel shear wall through development of fragility curves

    Directory of Open Access Journals (Sweden)

    Mohsen Gerami

    2017-02-01

    Full Text Available Fragility curves play an important role in damage assessment of buildings. Probability of damage induction to the structure against seismic events can be investigated upon generation of afore mentioned curves. In current research 360 time history analyses have been carried out on structures of 3, 10 and 20 story height and subsequently fragility curves have been adopted. The curves are developed based on two indices of inter story drifts and equivalent strip axial strains of the shear wall. Time history analysis is carried out in Perform 3d considering 10 far field seismograms and 10 near fields. Analysis of low height structures revealed that they are more vulnerable in accelerations lower than 0.8 g in near field earthquakes because of higher mode effects. Upon the generated fragility curves it was observed that middle and high structures have more acceptable performance and lower damage levels compared to low height structures in both near and far field seismic hazards.

  11. An Evolution in Research Practice for Investigating International Business Relationships

    OpenAIRE

    Anne HAMPTON; James ROWELL

    2013-01-01

    The purpose of this paper is to discuss the development and rationale of research methodology for a specific topic of research. The topic in question is an investigation into international business relationships, a complex subject and one that is very topical in the growing world of international business. It is intended to examine the logical development of research practice in our study and to show the changing thought processes and justifications we have made over a period of time. It is h...

  12. A structural investigation of the capsular antigens of some Klebsiella and E. coli serotypes

    International Nuclear Information System (INIS)

    Parolis, L.A.S.

    1985-11-01

    The work described in this thesis forms part of a program concerned with the study of exocellular capsular polysaccharides of some Enterobacteriaceae. 1 H- and 13 C-n.m.r. spectroscopy have been used in this study. Klebsiella and Escherichia coli are of interest because they are often pathogenic to man; E. coli are commensal bacteria as well as opportunistic pathogens. The bacterial capsule is the first line of defence of the bacterial cell against attack by the host's immunological defences and administered antibiotics, and thus knowledge of its composition and characteristics is of importance in devising ways of combating infection by these organisms. The structure of the capsular polysaccharide has been investigated employing a combination of chemical and spectroscopic methods. Several oligo-saccharides were isolated and characterized by high resolution 1 H-n.m.r. spectroscopy and methylation analysis. The E. coli group of bacteria possesses seventy-four recognized polysaccharide capsules and the structures of approximately twenty percent of these have been reported. The emphasis of this research group is centered on the elucidation of the structures of E. coli capsules. The acidic capsular polysaccharide isolated from E. coli K9 has been investigated using the techniques of methylation analysis periodate oxidation, bacteriophage degradation and n.m.r. spectroscopy. This thesis however represents a transition period in the study of Enterobacteriaceae capsular polysaccharides and so includes the structure elucidation of two Klebsiella polysaccharides, that of the K14 and K68 serotypes, and one E. coli polysaccharide, that of the K9 serotype. Bacteriophage-borne enzyme degradations of Klebsiella K14 and E. coli K9 polysaccharides have been performed and are presented. The thesis also includes a comparative study of the 0-specific side-chains of the lipo-polysaccharides of E. coli 09 and 09a serogroups

  13. Conducting Educational Design Research

    Science.gov (United States)

    McKenney, Susan; Reeves, Thomas

    2012-01-01

    Educational design research blends scientific investigation with systematic development and implementation of solutions to educational problems. Empirical investigation is conducted in real learning settings--not laboratories--to craft usable and effective solutions. At the same time, the research is carefully structured to produce theoretical…

  14. Structural investigation of HIV-1 nonnucleoside reverse transcriptase inhibitors: 2-Aryl-substituted benzimidazoles

    Science.gov (United States)

    Ziółkowska, Natasza E.; Michejda, Christopher J.; Bujacz, Grzegorz D.

    2009-11-01

    Acquired immunodeficiency syndrome (AIDS) caused by the human immunodeficiency virus (HIV) is one of the most destructive epidemics in history. Inhibitors of HIV enzymes are the main targets to develop drugs against that disease. Nonnucleoside reverse transcriptase inhibitors of HIV-1 (NNRTIs) are potentially effective and nontoxic. Structural studies provide information necessary to design more active compounds. The crystal structures of four NNRTI derivatives of 2-aryl-substituted N-benzyl-benzimidazole are presented here. Analysis of the geometrical parameters shows that the structures of the investigated inhibitors are rigid. The important geometrical parameter is the dihedral angle between the planes of the π-electron systems of the benzymidazole and benzyl moieties. The values of these dihedral angles are in a narrow range for all investigated inhibitors. There is no significant difference between the structure of the free inhibitor and the inhibitor in the complex with RT HIV-1. X-ray structures of the investigated inhibitors are a good basis for modeling enzyme-inhibitor interactions in rational drug design.

  15. Assessment of core structural materials and surveillance programme of research reactors. Report of the consultants meeting. Working material

    International Nuclear Information System (INIS)

    2009-01-01

    A series of presentations on the assessment of core structural components and materials at their facilities were given by the experts. The different issues related to degradation mechanisms were discussed. The outputs include a more thorough understanding of the specific challenges related to Research Reactors (RRs) as well as proposals for activities which could assist RR organizations in their efforts to address the issues involved. The experts recommend that research reactor operators consider implementation of surveillance programs for materials of core structural components, as part of ageing management program (TECDOC-792 and DS-412). It is recognised by experts that adequate archived structural material data is not available for many RRs. Access to this data and extension of existing material databases could help many operating organisations extend the operation of their RRs. The experts agreed that an IAEA Technical Meeting (TM) on Assessment of Core Structural Materials should be organised in December 2009 (IAEA HQ Vienna). The proposed objectives of the TM are: (i) exchange of detailed technical information on the assessment and ageing management of core structural materials, (ii) identification of materials of interest for further investigation, (iii) proposal for a new IAEA CRP on Assessment of Core Structural Materials, and (iv) identification of RRs prepared to participate in proposed CRP. Based on the response to a questionnaire prepared for the 2008 meeting of the Technical Working Group for Research Reactors, the number of engineering capital projects related to core structural components is proportionally lower than those related to,for example, I and C or electrical power systems. This implies that many operating research reactors will be operating longer using their original core structural components and justifies the assessment and evaluation programmes and activities proposed in this report. (author)

  16. Advancing Research on Structural Stigma and Sexual Orientation Disparities in Mental Health Among Youth.

    Science.gov (United States)

    Hatzenbuehler, Mark L

    2017-01-01

    Psychological research on stigma has focused largely on the perceptions of stigmatized individuals and their interpersonal interactions with the nonstigmatized. This work has been critical in documenting many of the ways in which stigma operates to harm those who are targeted. However, this research has also tended to overlook broader structural forms of stigma, which refer to societal-level conditions, cultural norms, and institutional policies and practices that constrain the lives of the stigmatized. In this article I describe the emerging field of research on structural stigma and review evidence documenting the harmful consequences of structural stigma for the mental/behavioral health of lesbian, gay, and bisexual youth. This research demonstrates that structural stigma represents an important, but thus far largely underrecognized, mechanism underlying mental health disparities related to sexual orientation among youth. I offer several suggestions to advance research in this area, including (a) adopting a life-course approach to the study of structural stigma; (b) developing novel measures of structural stigma; (c) expanding both the range of methods used for studying structural stigma and the sequelae of structural stigma that are evaluated; (d) identifying potential mediators and moderators of the structural stigma-health relationship; (e) examining intersectionalities; and (f) testing generalizability of structural stigma across other groups, with a particular focus on transgender youth. The implications of this research for preventive interventions and for public policy are also discussed.

  17. Horonobe Underground Research Laboratory project investigation program for the 2007 fiscal year (Translated document)

    International Nuclear Information System (INIS)

    Matsui, Hiroya; Nakayama, Masashi; Sanada, Hiroyuki; Yamaguchi, Takehiro

    2008-09-01

    As past of the research and development program on the geological disposal of high-level radioactive waste (HLW), the Horonobe Underground Research Center, a division of the Japan Atomic Energy Agency (JAEA), is implementing the Horonobe Underground Research Laboratory Project (Horonobe URL Project) with the aim at investigating sedimentary rock formations. According to the research plan described in the Midterm Plan of JAEA, geological investigations are to be carried out during the drilling of a shaft down to intermediate depth, while research and development in the areas of engineering technology and safety assessment are to be promoted by collaboration with other research organizations. The results of the R and D activities will be systematized as a 'knowledge base' that supports a wide range of arguments related to the safety of geological disposal. The Horonobe URL Project is planned to extend over a period of 20 years. The investigations will be conducted in three phases, namely 'Phase 1: Surface-based investigations', 'Phase 2: Construction phase' (investigations during construction of the underground facilities) and 'Phase 3: Operation phase' (research in the underground facilities). This report summarizes the investigation program for the 2007 fiscal year (2007/2008), the third year of the Phase 2 investigations. In the 2007 fiscal year, investigations in geoscientific research', including 'development of techniques for investigating the geological environment', 'development of techniques for use in the deep underground environment' and 'studies on the long-term stability of the geological environment', is continuously carried out. Investigations in 'research and development on geological disposal technology', including improving the reliability of disposal technologies' and 'enhancement of safety assessment methodologies' are also continuously carried out. Construction of the underground facilities is ongoing at the Ventilation Shaft and the East Shaft

  18. Earthquake engineering and structural dynamics studies at Bhabha Atomic Research Centre

    International Nuclear Information System (INIS)

    Reddy, G.R.; Parulekar, Y.M.; Sharma, A.; Dubey, P.N.; Vaity, K.N.; Kukreja, Mukhesh; Vaze, K.K.; Ghosh, A.K.; Kushwaha, H.S.

    2007-01-01

    Earthquake Engineering and structural Dynamics has gained the attention of many researchers throughout the world and extensive research work is performed. Linear behaviour of structures, systems and components (SSCs) subjected to earthquake/dynamic loading is clearly understood. However, nonlinear behaviour of SSCs subjected to earthquake/dynamic loading need to be understood clearly and design methods need to be validated experimentally. In view of this, three major areas in earthquake engineering and structural dynamics identified for research includes: design and development of passive devices to control the seismic/dynamic response of SSCs, nonlinear behaviour of piping systems subjected to earthquake loading and nonlinear behavior of RCC structures under seismic excitation or dynamic loading. BARC has performed extensive work and also being continued in the above-identified areas. The work performed is helping for clearer understanding of nonlinear behavior of SSCs as well as in developing new schemes, methodologies and devices to control the earthquake response of SSCs. (author)

  19. First-principles investigations on the electronic structures of U{sub 3}Si{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Tong [College of Information & Communication, Harbin Engineering University, Harbin, 150001 (China); Qiu, Nianxiang [Engineering Laboratory of Specialty Fibers and Nuclear Energy Materials, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, Zhejiang, 315201 (China); Wen, Xiaodong [State Key Laboratory of Coal Conversion, Institute of Coal Chemistry, Chinese Academy of Sciences, P.O. Box 165, Taiyuan, Shanxi, 030001 (China); Synfuels China, 100195 (China); Tian, Yonghui [College of Life Science, Sichuan University, Chengdu, Sichuan, 610064 (China); He, Jian [Center for Translational Medicine, Department of Biotechnology, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, Liaoning, 116023 (China); Luo, Kan; Zha, Xianhu; Zhou, Yuhong; Huang, Qing; Lang, Jiajian [Engineering Laboratory of Specialty Fibers and Nuclear Energy Materials, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, Zhejiang, 315201 (China); Du, Shiyu, E-mail: dushiyu@nimte.ac.cn [Engineering Laboratory of Specialty Fibers and Nuclear Energy Materials, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, Zhejiang, 315201 (China)

    2016-02-15

    U{sub 3}Si{sub 2} has been widely utilized as a high-power uranium fuel for research reactors due to its high density of uranium. However, theoretical investigations on this material are still scarce up to now. For this reason, the computational study via density functional theory (DFT) is performed on the U{sub 3}Si{sub 2} compound in this work. The properties of U{sub 3}Si{sub 2}, such as stable crystalline structures, density of states, charge distributions, formation energy of defects, as well as the mechanical properties are explored. The calculation results show that the U{sub 3}Si{sub 2} material is metallic and brittle, which is in good agreement with the previous experimental observations. The formation energy of uranium vacancy defect is predicted to be the lowest, similar with that of UN. The theoretical investigation of this work is expected to provide new insight of uranium silicide fuels.

  20. Hyperfine Structure of Spectral Lines of 143Nd+, 145Nd+, 139La+, 141Pr+ and 137Ba+ Investigated by Collinear Laser Ion Beam Spectroscopy

    International Nuclear Information System (INIS)

    Anjum, N.

    2012-01-01

    In this research work the hyperfine structures of spectral lines of barium (Ba) and three lanthanides elements; praseodymium (Pr), lanthanum (La) and neodymium (Nd) have been investigated. The hyperfine splitting factors A and B of the involved levels have been determined with high accuracy and the data are compared with other published results. This research work is divided in four parts. In the 1st part, the hyperfine structures of the spectral lines of the singly ionized praseodymium (Pr II) are investigated by three different laser spectroscopic techniques; laser induced fluorescence (LIF) spectroscopy, inter-modulated saturation spectroscopy and collinear laser ion beam spectroscopy (CLIBS). The 2nd part is concerned with the a control-check of the Marburg mass separator (MARS-II), as it was shifted from the University of Marburg, Germany, to Graz University of Technology in 2002. The check is performed using a well known spectral line 5853.67 Å of the odd isotope of singly ionized barium (137Ba II). In the 3rd part of this work the hyperfine structure of spectral lines of lanthanum-139 ions (139La II) is investigated. The 4th part is devoted to the investigation of the hyperfine structure of spectral lines of two odd isotopes of singly ionized neodymium (143Nd II and 145Nd II) and the determination of the coupling constants A and B of the involved levels. To determine the hyperfine anomaly the ratios of the magnetic dipole constants, i.e A143/A145, and the electric quadrupole constants B143/B145 of the corresponding levels are also calculated. The last three parts of this research project are executed using the high resolution, Doppler reduced method of CLIBS. In CLIBS technique the ions are accelerated by applying a high potential difference (∼ 20 kV). Due to the accelerating cooling (kinematic compression) the spread in velocities in the direction of the flight is reduced several times, hence the Doppler width is reduced. The accelerated ion beam is mass

  1. Theoretical investigation of the electronic structure of a substituted nickel phthalocyanine

    Energy Technology Data Exchange (ETDEWEB)

    Kaur, Prabhjot, E-mail: prabhphysics@gmail.com; Sachdeva, Ritika [Department of Physics, Panjab University Chandigarh-160014, Chandigarh (India); Singh, Sukhwinder [Department of Physics, Govt. College for Girls, Ludhiana-141008, Ludhiana (India)

    2016-05-23

    The optimized geometry and electronic structure of an organic compound nickel phthalocyanine tetrasulfonic acid tetra sodium salt have been investigated using density functional theory. We have also optimized the structure of nickel phthalocyanine tetrasulfonic acid tetra sodium salt in dimethyl sulfoxide to study effects of solvent on the electronic structure and transitions. Experimentally, the electronic transitions have been studied using UV-VIS spectroscopic technique. It is observed that the electronic transitions obtained from the theoretical studies generally agree with the experiment.

  2. Investigations of nuclear structure and nuclear reactions induced by complex projectiles

    International Nuclear Information System (INIS)

    Sarantites, D.G.

    1993-01-01

    This is a progress report on activities of the Washington University group in nuclear reaction studies for the period Sept 1, 1992 to Aug 31, 1993. This group has a research program which touches five areas of nuclear physics: nuclear structure studies at high spin; studies at the interface between structure and reactions; production and study of hot nuclei; reaction mechanism studies; development and use of novel techniques and instrumentation in the above areas of research. Specific activities of the group include in part: superdeformation in 82 Sr; structure of and identical bands in 182 Hg and 178 Pt; a highly deformed band in 136 Pm; particle decay of the 164 Yb compound nucleus; fusion reactions; proton evaporation; two-proton decay of 12 O; modeling and theoretical studies; excited 16 O disassembly into four alpha particles; 209 Bi + 136 Xe collisions at 28.2 MeV/amu; and development work on 4π solid angle gamma detectors, and x-ray detectors

  3. Investigations of nuclear structure and nuclear reactions induced by complex projectiles

    International Nuclear Information System (INIS)

    Sarantites, D.G.

    1990-01-01

    This report discusses research in the following areas: nuclear structure; fusion reactions near and below the barrier; incomplete fusion and fragmentation reactions; and instrumentation and analysis. (LSP)

  4. Investigation on the structure of liquid N-methylformamide-dimethylsulfoxide mixtures

    Science.gov (United States)

    Cordeiro, João M. M.; Soper, Alan K.

    2011-03-01

    The structures of liquid mixtures of N-methylformamide (NMF) and dimethyl sulfoxide (DMSO) at two concentrations (80% and 50% NMF) are investigated using a combination of neutron diffraction augmented with isotopic substitution and empirical potential structure refinement simulations. The results indicate that the NMF and DMSO molecules are hydrogen-bonded to one another with a preference for NMF-DMSO hydrogen bonding, compared to the NMF-NMF ones. The liquid is orientationally structured as a consequence of these hydrogen bonds between molecules. NMF-DMSO dimers are very stable species in the bulk of the mixture. The structure of the dimers is such that the angle between the molecular dipole moments is around 60°. The NMF molecules are well solvated in DMSO with potential implications for peptides solvation in this solvent.

  5. Why do pregnant women participate in research? A patient participation investigation using Q-Methodology.

    Science.gov (United States)

    Meshaka, Riwa; Jeffares, Stephen; Sadrudin, Farah; Huisman, Nicole; Saravanan, Ponnusamy

    2017-04-01

    Patient participation in study design is paramount to design studies that are acceptable to patients. Despite an increase in research involving pregnant women, relatively little is known about the motivational factors that govern their decision to be involved in a clinical trial, compared to other patient groups. To better understand the viewpoints of pregnant women who take part in clinical trials. We chose to use Q-Methodology, a method of exploring the structure of opinions surrounding a topic. We developed a set of 40 statements that encompassed the reasons why pregnant women might want to take part in research and 30 research participants from the PRiDE study (an observational trial investigating the role of micronutrients in gestational diabetes) were asked to rank them in order of agreement. The finished matrices from each participant were compared and analysed to produce capturing viewpoints. About 30 women aged 19-40 involved in the PRiDE study completed the questionnaire. There were two overarching motivators that emerged: a willingness to help medical research and improve our knowledge of medical science, and having a personal connection to the disease, therefore a potential fear of being affected by it. A third, less significant viewpoint, was that of a lack of inconvenience being a motivating factor. Understanding what motivates pregnant women to decide to take part in a research study is valuable and helps researchers maximize their uptake and retention rates when designing a trial involving pregnant women. © 2016 The Authors. Health Expectations Published by John Wiley & Sons Ltd.

  6. Prion structure investigated in situ, ex vivo, and in vitro by FTIR spectroscopy

    Science.gov (United States)

    Kneipp, Janina; Miller, Lisa M.; Spassov, Sashko; Sokolowski, Fabian; Lasch, Peter; Beekes, Michael; Naumann, Dieter

    2004-07-01

    Syrian hamster nervous tissue was investigated by FTIR microspectroscopy with conventional and synchrotron infrared light sources. Various tissue structures from the cerebellum and medulla oblongata of scrapie-infected and control hamsters were investigated at a spatial resolution of 50 μm. Single neurons in dorsal root ganglia of scrapie-infected hamsters were analyzed by raster scan mapping at 6 μm spatial resolution. These measurements enabled us to (i) scrutinize structural differences between infected and non-infected tissue and (ii) analyze for the first time the distribution of different protein structures in situ within single nerve cells. Single nerve cells exhibited areas of increased β-sheet content, which co-localized consistently with accumulations of the pathological prion protein (PrPSc). Spectral data were also obtained from purified, partly proteinase K digested PrPSc isolated from scrapie-infected nervous tissue of hamsters to elucidate similarities/dissimilarities between prion structure in situ and ex vivo. A further comparison is drawn to the recombinant Syrian hamster prion protein SHaPrP90-232, whose in vitro transition from the predominantly a-helical isoform to β-sheet rich oligomeric structures was also investigated by FTIR spectroscopy.

  7. FRF-based structural damage detection of controlled buildings with podium structures: Experimental investigation

    Science.gov (United States)

    Xu, Y. L.; Huang, Q.; Zhan, S.; Su, Z. Q.; Liu, H. J.

    2014-06-01

    How to use control devices to enhance system identification and damage detection in relation to a structure that requires both vibration control and structural health monitoring is an interesting yet practical topic. In this study, the possibility of using the added stiffness provided by control devices and frequency response functions (FRFs) to detect damage in a building complex was explored experimentally. Scale models of a 12-storey main building and a 3-storey podium structure were built to represent a building complex. Given that the connection between the main building and the podium structure is most susceptible to damage, damage to the building complex was experimentally simulated by changing the connection stiffness. To simulate the added stiffness provided by a semi-active friction damper, a steel circular ring was designed and used to add the related stiffness to the building complex. By varying the connection stiffness using an eccentric wheel excitation system and by adding or not adding the circular ring, eight cases were investigated and eight sets of FRFs were measured. The experimental results were used to detect damage (changes in connection stiffness) using a recently proposed FRF-based damage detection method. The experimental results showed that the FRF-based damage detection method could satisfactorily locate and quantify damage.

  8. National evaluation of the benefits and risks of greater structuring and coding of the electronic health record: exploratory qualitative investigation.

    Science.gov (United States)

    Morrison, Zoe; Fernando, Bernard; Kalra, Dipak; Cresswell, Kathrin; Sheikh, Aziz

    2014-01-01

    We aimed to explore stakeholder views, attitudes, needs, and expectations regarding likely benefits and risks resulting from increased structuring and coding of clinical information within electronic health records (EHRs). Qualitative investigation in primary and secondary care and research settings throughout the UK. Data were derived from interviews, expert discussion groups, observations, and relevant documents. Participants (n=70) included patients, healthcare professionals, health service commissioners, policy makers, managers, administrators, systems developers, researchers, and academics. Four main themes arose from our data: variations in documentation practice; patient care benefits; secondary uses of information; and informing and involving patients. We observed a lack of guidelines, co-ordination, and dissemination of best practice relating to the design and use of information structures. While we identified immediate benefits for direct care and secondary analysis, many healthcare professionals did not see the relevance of structured and/or coded data to clinical practice. The potential for structured information to increase patient understanding of their diagnosis and treatment contrasted with concerns regarding the appropriateness of coded information for patients. The design and development of EHRs requires the capture of narrative information to reflect patient/clinician communication and computable data for administration and research purposes. Increased structuring and/or coding of EHRs therefore offers both benefits and risks. Documentation standards within clinical guidelines are likely to encourage comprehensive, accurate processing of data. As data structures may impact upon clinician/patient interactions, new models of documentation may be necessary if EHRs are to be read and authored by patients.

  9. Investigations of nuclear structure and nuclear reactions induced by complex projectiles

    International Nuclear Information System (INIS)

    Sarantites, D.G.

    1992-01-01

    The research program described touches five areas of nuclear physics: nuclear structure studies at high spin (hyperdeformation in the mass A ≅ 182 region, structure of 182 Hg and 182 Au at high spin, a highly deformed band in 136 Pm and the anomalous h 11/2 proton crossing in the A∼135 superdeformed region), studies at the interface between structure and reactions (population of entry states in heavy-ion fusion reactions, nuclear structure effects in proton evaporation spectra, nuclear structure- dependent entry state population by total spectroscopy, entrance channel effects in fusion near the barrier, lifetimes of subbarrier α particles by the atomic clock method), production and study of hot nuclei (the statistical model evaporation code EVAP, statistical emission of deuterons and tritons from highly excited compound nuclei, heavy-fragment emission as a probe of the thermal properties of highly excited compound nuclei, use of incoming-wave boundary condition transmission coefficients in the statistical model: implications in the particle evaporation spectra, study of transparency in the optical model), reaction mechanism studies (binary character of highly dissipative 209 Bi + 136 Xe collisions at E/A=28.2 MeV), and development and use of novel techniques and instrumentation in these areas of research (including a 4π channel selection device, a novel x-ray detector, and a simple channel-selecting detector)

  10. Investigations on the porous media equations and resistance coefficients for coastal structures

    DEFF Research Database (Denmark)

    Jensen, Bjarne; Jacobsen, Niels Gjøl; Christensen, Erik Damgaard

    2014-01-01

    -dimensional wave–structure interaction, run-up, run-down and pressure damping, regular and irregular wave conditions and evaluation of overtopping. Simple two and three dimensional uniform caisson structures and breakwater layouts were investigated. The model was implemented in the open source CFD library OpenFOAM...

  11. Recent Research and Application Activities on Structural Health ...

    African Journals Online (AJOL)

    ... newly constructed bridges, (2) research and development activities on smart sensors such as optical fiber sensors and piezo-electric sensors, (3) structural damage detection methods using measured data, and (4) a test road project for pavement design verification and enhancement by the Korea Highway Corporation.

  12. Sediment pollution of the Elbe River side structures - current research

    Science.gov (United States)

    Chalupova, Dagmar; Janský, Bohumír

    2016-04-01

    The contribution brings the summarized results of a long-term research on sediment pollution of side structures of the Elbe River over the last 14 years. The investigation has been focused on old anthropogenic pollution of sediment cores taken from fluvial lakes and floodplain, as the sampling of deeper sediments outside the riverbed is not a part of systematic monitoring of sediment pollution of the Elbe. The Elbe River floodplain has been influenced by human activities since the Middle Ages, but the main anthropogenic pollution have been produced in the 20th century. The studied localities were chosen with the respect to the distance from the source of industrial pollution, the intensity of hydrological communication with the river and the surrounding landuse to determine the extend and the level of anthropogenic contamination in the Elbe River floodplain ecosystem. Apart from bathymetric measurements, observation of the hydrological regime in several fluvial lakes or water quality sampling at some localities, the research was focused above all on determination of metal concentrations (Ag, Cd, Cr, Cu, Fe, Hg, Mn, Pb, Zn) in all taken sediment cores, specific organic compounds (PCBs, DDT, HCH, HCB, PAHs etc.), total organic carbon at some localities and grain structure analyses. The data were also compared with the results of systematic sediment monitoring from the nearest riverbed sampling stations on the Elbe River. The highest concentrations of metals and specific organic compounds were determined in the sediments taken from fluvial lakes and floodplain (Zimní přístav PARAMO, Rosice fuvial Lake, Libiš pool etc.) situated in the vicinity of the main Elbe River polluters - Synthesia chemical plant and PARAMO refinery in Pardubice or Spolana chemical plant near Neratovice. However, there was also determined a significant role of the hydrological communication with the river proved with lower sediment pollution in separated localities. The realization of the

  13. Contrastive Numerical Investigations on Thermo-Structural Behaviors in Mass Concrete with Various Cements

    Science.gov (United States)

    Zhou, Wei; Feng, Chuqiao; Liu, Xinghong; Liu, Shuhua; Zhang, Chao; Yuan, Wei

    2016-01-01

    This work is a contrastive investigation of numerical simulations to improve the comprehension of thermo-structural coupled phenomena of mass concrete structures during construction. The finite element (FE) analysis of thermo-structural behaviors is used to investigate the applicability of supersulfated cement (SSC) in mass concrete structures. A multi-scale framework based on a homogenization scheme is adopted in the parameter studies to describe the nonlinear concrete behaviors. Based on the experimental data of hydration heat evolution rate and quantity of SSC and fly ash Portland cement, the hydration properties of various cements are studied. Simulations are run on a concrete dam section with a conventional method and a chemo-thermo-mechanical coupled method. The results show that SSC is more suitable for mass concrete structures from the standpoint of temperature control and crack prevention. PMID:28773517

  14. Variable temperature investigation of the atomic structure of gold nanoparticles

    International Nuclear Information System (INIS)

    Young, N P; Kirkland, A I; Huis, M A van; Zandbergen, H W; Xu, H

    2010-01-01

    The characterisation of nanoparticle structures is the first step towards understanding and optimising their utility in important technological applications such as catalysis. Using newly developed in-situ transmission electron microscopy (TEM) specimen holders, the temperature dependent atomic structure of gold nanoparticles in the size range 5-12 nm has been investigated. In this size interval, the decahedral morphology has been identified as the most favourable structure at or above room temperature, while particle surface roughening becomes evident above 600 0 C. An icosahedral transition has also been identified at low temperature in particles under 9 nm in diameter. These experimental results are consistent with recently published temperature dependent equilibrium phase maps for gold nanoparticles.

  15. Variable temperature investigation of the atomic structure of gold nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Young, N P; Kirkland, A I [Department of Materials, University of Oxford, Parks Road, Oxford OX1 3PH (United Kingdom); Huis, M A van; Zandbergen, H W [Kavli Insitute of Nanoscience, Delft University of Technolgy, Lorentzweg 1, NL-2628CJ, Delft (Netherlands); Xu, H, E-mail: neil.young@materials.ox.ac.u [Department of Geology and Geophysics, and Materials Science Program, University of Wisconsin-Madison, Madison, Wisconsin (United States)

    2010-07-01

    The characterisation of nanoparticle structures is the first step towards understanding and optimising their utility in important technological applications such as catalysis. Using newly developed in-situ transmission electron microscopy (TEM) specimen holders, the temperature dependent atomic structure of gold nanoparticles in the size range 5-12 nm has been investigated. In this size interval, the decahedral morphology has been identified as the most favourable structure at or above room temperature, while particle surface roughening becomes evident above 600{sup 0}C. An icosahedral transition has also been identified at low temperature in particles under 9 nm in diameter. These experimental results are consistent with recently published temperature dependent equilibrium phase maps for gold nanoparticles.

  16. An Evolution in Research Practice for Investigating International Business Relationships

    Directory of Open Access Journals (Sweden)

    Anne HAMPTON

    2013-09-01

    Full Text Available The purpose of this paper is to discuss the development and rationale of research methodology for a specific topic of research. The topic in question is an investigation into international business relationships, a complex subject and one that is very topical in the growing world of international business. It is intended to examine the logical development of research practice in our study and to show the changing thought processes and justifications we have made over a period of time. It is hoped that this discussion paper will be helpful to academics and students alike, as so often research methodology is only discussed in terms of the final method/techniques chosen with an emphasis on the technical aspects of the methods rather than relating them to the subject to be researched.

  17. Investigating the topological structure of quenched lattice QCD with overlap fermions using a multi-probing approximation

    Science.gov (United States)

    Zou, You-Hao; Zhang, Jian-Bo; Xiong, Guang-Yi; Chen, Ying; Liu, Chuan; Liu, Yu-Bin; Ma, Jian-Ping

    2017-10-01

    The topological charge density and topological susceptibility are determined by a multi-probing approximation using overlap fermions in quenched SU(3) gauge theory. Then we investigate the topological structure of the quenched QCD vacuum, and compare it with results from the all-scale topological density. The results are consistent. Random permuted topological charge density is used to check whether these structures represent underlying ordered properties. The pseudoscalar glueball mass is extracted from the two-point correlation function of the topological charge density. We study 3 ensembles of different lattice spacing a with the same lattice volume 163×32. The results are compatible with the results of all-scale topological charge density, and the topological structures revealed by multi-probing are much closer to all-scale topological charge density than those from eigenmode expansion. Supported by National Natural Science Foundation of China (NSFC) (11335001, 11275169, 11075167), It is also supported in part by the DFG and the NSFC (11261130311) through funds provided to the Sino-German CRC 110 "Symmetries and the Emergence of Structure in QCD". This work was also funded in part by National Basic Research Program of China (973 Program) (2015CB856700)

  18. INVESTIGATING THE FACTOR STRUCTURE OF THE BLOG ATTITUDE SCALE

    Directory of Open Access Journals (Sweden)

    Zahra SHAHSAVAR

    2010-10-01

    Full Text Available Due to the wide application of advanced technology in education, many attitude scales have been developed to evaluate learners’ attitudes toward educational tools. However, with the rapid development of emerging technologies, using blogs as one of the Web 2.0 tools is still in its infancy and few blog attitude scales have been developed yet. In view of this need, a lot of researchers like to design a new scale based on their conceptual and theoretical framework of their own study rather than using available scales. The present study reports the design and development of a blog attitude scale (BAS. The researchers developed a pool of items to capture the complexity of the blog attitude trait, selected 29 items in the content analysis, and assigned the scale comprising 29 items to 216 undergraduate students to explore the underlying structure of the BAS. In exploratory factor analysis, three factors were discovered: blog anxiety, blog desirability, and blog self-efficacy; 14 items were excluded. The extracted items were subjected to a confirmatory factor analysis which lent further support to the BAS underpinning structure.

  19. Investigations on the local structure and the spin-Hamiltonian ...

    Indian Academy of Sciences (India)

    2016-07-13

    Jul 13, 2016 ... (2016) 87: 22 c Indian Academy of Sciences. DOI 10.1007/s12043-016-1234-6. Investigations on the local structure and the spin-Hamiltonian parameters for the tetragonal Cu. 2+ centre in ZnGeF6·6H2O crystal. LI CHAO-YING. ∗. , HUANG YING and ZHENG XUE MEI. School of Physics and Electronic ...

  20. RATU Nuclear power plant structural safety research programme 1990-1994. Final report

    International Nuclear Information System (INIS)

    Rintamaa, R.; Sarkimo, M.

    1995-12-01

    The major part of nuclear energy research in Finland has been organized as five-year nationally coordinated research programmes. The research programme on the Nuclear Power Plant Structural Safety was carried out during the period from 1990 to 1994. The total volume was about 76 person-years and the expenditure about 49 million FIM. Studies on the structural materials in nuclear power plants created the experimental data and background information necessary for the structural integrity assessments of mechanical components. The research was carried out by developing experimental fracture mechanics methods including statistical analysis methods of material property data, and by studying material ageing and, in particular, mechanisms of material deterioration due to neutron irradiation, corrosion and water chemistry. Besides material studies, new testing methods and sensors for the measurement of loading and water chemistry parameters have been developed

  1. Overview of experimental research on nuclear structure in department of modern applied physics

    International Nuclear Information System (INIS)

    Zhu Shengjiang

    1999-01-01

    The experimental research on nuclear structure in Department of Modern Applied Physics, Tsinghua University has been summarized. The main research results in high spin states of nuclear structure, as well as some low spin states, have been reported

  2. Department of Defense Research, Development, Test, and Evaluation (RDT and E): Appropriations Structure

    Science.gov (United States)

    2016-12-13

    Research Projects Agency website, accessed December 5, 2016, http://www.darpa.mil/about-us/mission. Appropriations Structure of Defense RDT&E...funding streams. Among the many other factors that may affect the effectiveness of the performance of RDT&E are: organizational structures and...Department of Defense Research, Development, Test, and Evaluation (RDT&E): Appropriations Structure John F. Sargent Jr. Specialist in

  3. Investigating the Theoretical Structure of the DAS-II Core Battery at School Age Using Bayesian Structural Equation Modeling

    Science.gov (United States)

    Dombrowski, Stefan C.; Golay, Philippe; McGill, Ryan J.; Canivez, Gary L.

    2018-01-01

    Bayesian structural equation modeling (BSEM) was used to investigate the latent structure of the Differential Ability Scales-Second Edition core battery using the standardization sample normative data for ages 7-17. Results revealed plausibility of a three-factor model, consistent with publisher theory, expressed as either a higher-order (HO) or a…

  4. Investigation of electronic lattice structure by positron annihilation in some insulators

    International Nuclear Information System (INIS)

    Coussot, Gerard

    1970-01-01

    The angular distribution of gamma quanta resulting from positron annihilation in single insulator crystals was measured with long slit geometry apparatus for intense positron sources ( 64 Cu ≅ 1 Ci). Two new phenomena were observed in the angular correlation curves. In the f. c. c. MgO, UO 2 , CaF 2 crystals, modulations appeared at angles corresponding to the limit of the first Brillouin zone in relation to the crystallographic direction studied. In SiO 2 , F 2 Mg, F 2 Mn crystals, a narrow peak at 0 mrad and a fine structure superimposed on the broad distribution, were resolved. The fine structure which is correlated with the narrow component is characterized by modulations appearing at angles corresponding to the projection of reciprocal lattice vectors along the crystallographic direction investigated. The narrow peak at p ≅ 0 suggests the formation of a bound state (positron-electron). If this bound state is described by a Bloch wave, the modulations observed correspond to the Fourier components which contribute to every reciprocal lattice vector p = G ('Umklapp' process). This model predicts that the 'Umklapp' process in polycrystals must produce a change in slope which can be experimentally observed. A systematic research of optimal observation conditions shows that the intensity of the narrow component is closely correlated with the purity and the perfection of the crystal where p-Ps is presumably formed as suggested by magnetic experiments. (author) [fr

  5. Analytic tools for investigating the structure of network reliability measures with regard to observation correlations

    Science.gov (United States)

    Prószyński, W.; Kwaśniak, M.

    2018-03-01

    A global measure of observation correlations in a network is proposed, together with the auxiliary indices related to non-diagonal elements of the correlation matrix. Based on the above global measure, a specific representation of the correlation matrix is presented, being the result of rigorously proven theorem formulated within the present research. According to the theorem, each positive definite correlation matrix can be expressed by a scale factor and a so-called internal weight matrix. Such a representation made it possible to investigate the structure of the basic reliability measures with regard to observation correlations. Numerical examples carried out for two test networks illustrate the structure of those measures that proved to be dependent on global correlation index. Also, the levels of global correlation are proposed. It is shown that one can readily find an approximate value of the global correlation index, and hence the correlation level, for the expected values of auxiliary indices being the only knowledge about a correlation matrix of interest. The paper is an extended continuation of the previous study of authors that was confined to the elementary case termed uniform correlation. The extension covers arbitrary correlation matrices and a structure of correlation effect.

  6. Theoretical investigation of structural and electronic properties of ultrathin nickle nanowire

    Energy Technology Data Exchange (ETDEWEB)

    Sing, Deobrat; Sonvane, Y. A. [Department of Applied Physics, S. V. National Institute of Technology, Surat, 395007 (India)

    2016-04-13

    We have performed first principles calculations for structural and electronic properties of ultrathin Nickle nanowire. We have systematically investigated the equilibrium structure and electronic properties of 4-Ni square, 5-Ni pentagonal, 5- Ni Pyramidal, 6- Ni pentagonal, 6-Ni Hexagonal and 7-Ni Hexagonal structure nanowires having different cross-sections with 4-7 Ni atoms per unit cell. The structural properties of the studied Ni nanowires were greatly different from those of face centered cubic bulk Ni. For each wire the equilibrium lattice constant was obtained. In the present result all the nanowires are found to be metallic. The density of charge revealed delocalized metallic bonding for all studied Ni nanowires.

  7. Investigations of the structure and electromagnetic interactions of few-body systems

    International Nuclear Information System (INIS)

    Lehman, D.R.

    1991-07-01

    In order to make it easy for the reader to see the specific research carried out and the progress make, the following report of progress is done by topic. Each item has a format layout of Topic, Investigators, Objective, Significance, and Description of Progress, followed at the end by the relevant references. As is clear from the topics listed, the emphasis of the GWU theory group has been on the structure and electromagnetic interactions of few-body nuclei. Both low- and intermediate-energy electromagnetic disintegration of these nuclei is considered. When the excitation energy of the target nucleus is low, the aim has been carry out the continuum part of the theoretical work exactly, this is, by means of exact three- and four-body dynamics. When structure questions are the issue, exact calculations are always carried through, limited only by the underlying two-body or three-body interactions used as input. Implicit in our work is the question of how far one can go within the traditional nuclear physics framework, i.e., nucleons and mesons in a nonrelativistic setting. Our central goal is to carry through state-of-the-art few-body calculations that will serve as an unambiguous means of determining at what point standard nuclear physics requires quark degrees of freedom in order to understand the phenomena in question. So far, in the problems considered, there has been no evidence of the necessity to go beyond the traditional approach, though we always keep in mind that possibility. As our work is involved with questions in the intermediate-energy realm, moving from a nonrelativistic framework to a relativistic one is always a consideration. Currently, for the problems that have been pursued in this domain of energy, the issues concern far more the mechanisms of the reactions and structural questions than the need to move to relativistic dynamics

  8. Theoretical and numerical investigations of sub-wavelength diffractive optical structures

    DEFF Research Database (Denmark)

    Dridi, Kim

    2000-01-01

    The work in this thesis concerns theoretical and numerical investigations of sub-wavelength diffractive optical structures, relying on advanced two-dimensional vectorial numerical models that have applications in Optics and Electromagnetics. Integrated Optics is predicted to play a major role......, such as in dielectric waveguides with gratings and periodic media or photonic crystal structures. The vectorial electromagnetic nature of light is therefore taken into account in the modeling of these diffractive structures. An electromagnetic vector-field model for optical components design based on the classical...... finite-difference time domain method and exact radiation integrals is implemented for the polarization where the electric field vector is perpendicular to the two dimentional plane of symmetry. The computational model solves the full vectorial time domain Maxwell equations with general sources...

  9. Structural investigation of e-beam cured epoxy resins through solid state NMR

    International Nuclear Information System (INIS)

    Alessi, Sabina; Spinella, Alberto; Caponetti, Eugenio; Dispenza, Clelia; Spadaro, Giuseppe

    2012-01-01

    In this paper the network structure of e-beam cured DGEBF based epoxy resins is investigated. Two epoxy systems, having different reactivity and cured in different process conditions, were analyzed through solid state NMR spectroscopy. The analysis shows that the more reactive system has higher cross-linking density and higher uniformity of network distribution. Similar information were obtained, in a previous work, on the same systems through dynamic mechanical thermal analysis. It is worth noting that unlike DMTA tests, which interfere with the molecular structure of the analyzed material, due to the heating during the analysis itself, more reliable information, without any artefact, are obtained by solid state NMR, carried out at constant room temperature. - Highlights: ► The structure of two e-beam cured epoxy systems is investigated through solid state NMR. ► The aim is to have direct information about the structure without inducing modifications. ► The different molecular structures are able to emphasize the response of solid state NMR. ► T 1 H, T 1ρ H and T CH measurements indicate different cross-linking degrees. ► The NMR results are in agreement with DMTA analysis performed in a previous paper.

  10. Re-investigation of the crystal structure of enstatite under high-pressure conditions

    DEFF Research Database (Denmark)

    Periotto, Benedetta; Balic Zunic, Tonci; Nestola, Fabrizio

    2012-01-01

    A synthetic single crystal of pure orthoenstatite (MgSiO3, space group Pbca) has been investigated at high pressure for structural determinations by in situ single-crystal X‑ray diffraction using a diamond-anvil cell. Ten complete intensity data collections were performed up to 9.36 GPa. This study...... with different compositions. The structural evolution determined in this work confirms the high-pressure evolution found previously for other orthopyroxenes and removes some ambiguities originating from the less accurate published data on the MgSiO3 structure at high pressure. The structural compression...

  11. Investigation on the thermographic detection of corrosion in RC structures

    Science.gov (United States)

    Tantele, Elia A.; Votsis, Renos A.; Kyriakides, Nicholas; Georgiou, Panagiota G.; Ioannou, Fotia G.

    2017-09-01

    Corrosion of the steel reinforcement is the main problem of reinforced concrete (RC) structures. Over the past decades, several methods have been developed aiming to detect the corrosion process early in order to minimise the structural damage and consequently the repairing costs. Emphasis was given in developing methods and techniques of non-destructive nature providing fast on-the-spot detection and covering large areas rather that concentrating on single locations. This study, investigates a non-destructive corrosion detection technique for reinforced concrete, which is based on infrared thermography and the difference in thermal characteristics of corroded and non-corroded steel rebars. The technique is based on the principle that corrosion products have poor heat conductivity, and they inhibit the diffusion of heat that is generated in the reinforcing bar due to heating. For the investigation RC specimens, have been constructed in the laboratory using embedded steel bars of different corrosion states. Afterward, one surface of the specimens was heated using an electric device while thermal images were captured at predefined time instants on the opposite surface with an IR camera. The test results showed a clear difference between the thermal characteristics of the corroded and the non-corroded samples, which demonstrates the potential of using thermography in corrosion detection in RC structures.

  12. Investigation of durability of silica fume concretes in coastal structures within tidal zone

    International Nuclear Information System (INIS)

    Ganjian, E.; Sadeghi Pouya, H.

    2003-01-01

    In recent decade use of silica fume has been become greater in coastal concrete structures in the persona gulf, to increase durability of those establishments. In this research the durability of cement passers and concrete cubes with use of 7 and 10 percent of silica fume as a cement replacement have been investigated in three curing conditions (fresh water, coast of sea and simulation bonds) by measuring compressive strengths and capillary absorption. Silica fume specimens under wetting and drying condition showed more strength loss after 180 days compare to samples without silica fume or cured in the fresh water. In addition the greater silica fume amount in specimens cured within tidal zone and under wetting and drying simulation, the more water absorption by capillary. According to the results, good correspondence between simulated condition and real site exposure was obtained

  13. Using leap motion to investigate the emergence of structure in speech and language.

    Science.gov (United States)

    Eryilmaz, Kerem; Little, Hannah

    2017-10-01

     In evolutionary linguistics, experiments using artificial signal spaces are being used to investigate the emergenceof speech structure. These signal spaces need to be continuous, non-discretized spaces from which discrete unitsand patterns can emerge. They need to be dissimilar from-but comparable with-the vocal tract, in order tominimize interference from pre-existing linguistic knowledge, while informing us about language. This is a hardbalance to strike. This article outlines a new approach that uses the Leap Motion, an infrared controller that canconvert manual movement in 3d space into sound. The signal space using this approach is more flexible than signalspaces in previous attempts. Further, output data using this approach is simpler to arrange and analyze. Theexperimental interface was built using free, and mostly open- source libraries in Python. We provide our sourcecode for other researchers as open source.

  14. Bone structure investigation using X-ray and neutron radiography techniques

    International Nuclear Information System (INIS)

    Kamali Moghaddam, K.; Taheri, T.; Ayubian, M.

    2008-01-01

    In this paper we report a study of the periodic variation of bone tissue humidity immediately after death using both neutron and X-ray radiography techniques. After death, bone tissue experiences sequential change over time. This change consists of organic and inorganic phase variations of the bone structure, as well as gradual reduction of the bone's water content. These variations are investigated by periodically imaging dead bone using X-ray and neutron radiography. Chemical separation techniques such as calcification and decalcification were used to separate the organic and inorganic phases of the bone. Comparison between X-ray and neutron radiographs of bone following phase separation can be potentially used to investigate the bone disease or to determine a cause of death. In our experiments, we use adult rat femur bones, and the interpretations of these results are presented based on our understanding of bone structure and images produced by neutron and X-ray photon interactions

  15. Bone structure investigation using X-ray and neutron radiography techniques

    Energy Technology Data Exchange (ETDEWEB)

    Kamali Moghaddam, K. [Nuclear Research Center (NRC), Atomic Energy Organization of Iran (AEOI), P.O. Box 11365-8486, Tehran (Iran, Islamic Republic of)], E-mail: kkamali@aeoi.org.ir; Taheri, T.; Ayubian, M. [Nuclear Research Center (NRC), Atomic Energy Organization of Iran (AEOI), P.O. Box 11365-8486, Tehran (Iran, Islamic Republic of)

    2008-01-15

    In this paper we report a study of the periodic variation of bone tissue humidity immediately after death using both neutron and X-ray radiography techniques. After death, bone tissue experiences sequential change over time. This change consists of organic and inorganic phase variations of the bone structure, as well as gradual reduction of the bone's water content. These variations are investigated by periodically imaging dead bone using X-ray and neutron radiography. Chemical separation techniques such as calcification and decalcification were used to separate the organic and inorganic phases of the bone. Comparison between X-ray and neutron radiographs of bone following phase separation can be potentially used to investigate the bone disease or to determine a cause of death. In our experiments, we use adult rat femur bones, and the interpretations of these results are presented based on our understanding of bone structure and images produced by neutron and X-ray photon interactions.

  16. Investigation of RNA Structure by High-Throughput SHAPE-Based Probing Methods

    DEFF Research Database (Denmark)

    Poulsen, Line Dahl

    of highthroughput SHAPE-based approaches to investigate RNA structure based on novel SHAPE reagents that permit selection of full-length cDNAs. The SHAPE Selection (SHAPES) method is applied to the foot-and-mouth disease virus (FMDV) plus strand RNA genome, and the data is used to construct a genome-wide structural...... that they are functional. The SHAPES method is further applied to the hepatitis C virus (HCV), where the data is used to refine known and predicted structures. Over the past years, the interest of studying RNA structure in their native environment has been increased, and to allow studying RNA structure inside living cells...... using the SHAPE Selection approach, I introduce a biotinylated probing reagent. This chemical can cross cell membranes and reacts with RNA inside the cells, allowing the structural conformations to be studied in the context of physiological relevant conditions in living cells. The methods and results...

  17. An Algorithm for Investigating the Structure of Material Surfaces

    Directory of Open Access Journals (Sweden)

    M. Toman

    2003-01-01

    Full Text Available The aim of this paper is to summarize the algorithm and the experience that have been achieved in the investigation of grain structure of surfaces of certain materials, particularly from samples of gold. The main parts of the algorithm to be discussed are:1. acquisition of input data,2. localization of grain region,3. representation of grain size,4. representation of outputs (postprocessing.

  18. HAIM OMLET: An Expert System For Research In Orthomodular Lattices And Related Structures

    Science.gov (United States)

    Dankel, D. D.; Rodriguez, R. V.; Anger, F. D.

    1986-03-01

    This paper describes research towards the construction of an expert system combining the brute force power of algorithmic computation and the inductive reasoning power of a rule-based inference engine in the mathematical area of discrete structures. Little research has been conducted on extending existing expert systems' technology to computationally complex areas. This research addresses the extension of expert systems into areas such as these, where the process of inference by itself will not produce the proper results. Additionally, the research will demonstrate the benefits of combining inference engines and mathematical algorithms to attack computationally complex problems. The specific aim is to produce an expert system which embodies expert level knowledge of orthomodular lattices, graphs, structure spaces, boolean algebras, incidence relations, and projective configurations. The resulting system, implemented on a micro-computer, will provide researchers a powerful and accessible tool for exploring these discrete structures. The system's "shell" will provide a structure for developing other expert systems with similar capabilities in such related areas as coding theory, categories, monoids, automata theory, and non-standard logics.

  19. Prompting transdisciplinary research: Promising futures for using the performance metaphor in research

    NARCIS (Netherlands)

    Boyd, Davina; Buizer, I.M.; Schibeci, Renato; Baudains, Catherine

    2015-01-01

    Transdisciplinary research is increasingly recognised as important for investigating and addressing ‘wicked’ problems such as climate change, food insecurity and poverty, but is far from commonplace. There are structural impediments to transdisciplinarity such as university structures, publication

  20. Acoustic investigation of structure of magnetic fluids based on transformer oil mogul

    International Nuclear Information System (INIS)

    Kudelcik, J.; Bury, P.; Kopcansky, P.; Timko, M.

    2013-01-01

    In this paper the authors study the influence of temperature on the changes of the acoustic attenuation in magnetic fluids based on transformer oil MOGUL caused by an external magnetic field measured. The influences of both magnetic field and temperature on the structures of investigated magnetic fluids based on the transformer oil MOGUL were observed using acoustic spectroscopy. The effect of external magnetic field on the creation of clusters of nanoparticles in magnetic fluids was confirmed and their influence on the development of attenuation was described. In this type of magnetic fluid complicated structures of clusters at magnetic field over 100 mT are created. These structures are than at higher magnetic field almost stable. This state of equilibrium is not function of time. Measurements also confirmed that the lifetime of these structures or clusters is very short. The further investigation of the time and temperature dependences of the acoustic attenuation on the magnetic field at different concentrations of magnetic nanoparticles and various direction of magnetic field are necessary to understand all processes in this magnetic fluid. (authors)

  1. A Program of Research and Education in Aerospace Structures at the Joint Institute for Advancement of Flight Sciences

    Science.gov (United States)

    Tolson, Robert H.

    2000-01-01

    The objectives of the cooperative effort with NASA was to conduct research related to aerospace structures and to increase the quality and quantity of highly trained engineers knowledgeable about aerospace structures. The program has successfully met the objectives and has been of significant benefit to NASA LARC, the GWU and the nation. The program was initiated with 3 students in 1994 under the direction of Dr. Robert Tolson as the Principal Investigator. Since initiation, 14 students have been involved in the program, resulting in 11 MS degrees with 2 more expected in 2000. The 11 MS theses and projects are listed. For technology transfer purposes some research is not reported in thesis form. Graduates from the program have been hired at aerospace and other companies across the nation, providing GWU and LARC with important industry and government contacts.

  2. Structural concepts and experimental considerations for a versatile high-speed research airplane

    Science.gov (United States)

    Jackson, L. R.; Kirkham, F. S.; Weidner, J. P.

    1978-01-01

    Future aircraft may be hydrogen fueled and fly at hypersonic speeds. The resulting environments will require new structural concepts to satisfy performance goals. Large representative structures will have to be flight tested prior to commitment to a costly vehicle fleet. To perform flight tests, a versatile, economical, high-speed research airplane is defined. Results of this study including experimental considerations for a hypersonic research airplane are reported.

  3. Spectral investigation of a complex space charge structure in plasma

    International Nuclear Information System (INIS)

    Gurlui, S.; Dimitriu, D. G.; Ionita, C.; Schrittwieser, R. W.

    2009-01-01

    Complex space charge structures bordered by electrical double layers were spectrally investigated in argon plasma in the domain 400-1000 nm, identifying the lines corresponding to the transitions from different excited states of argon. The electron excitation temperature in the argon atoms was estimated from the spectral lines intensity ratio. (authors)

  4. Seismic safety margins research program. Phase I final report - Major structure response (Project IV)

    International Nuclear Information System (INIS)

    Benda, B.J.; Johnson, J.J.; Lo, T.Y.

    1981-08-01

    The primary task of the Major Structure Response Project within the Seismic Safety Margins Research Program (SSMRP) was to develop detailed finite element models of the Zion Nuclear Power Plant's containment building and auxiliary-fuel-turbine (AFT) complex. The resulting models served as input to the seismic methodology analysis chain. The containment shell was modeled as a series of beam elements with the shear and bending characteristics of a circular cylindrical shell. Masses and rotary inertias were lumped at nodal points; thirteen modes were included in the analysis. The internal structure was modeled with three-dimensional finite elements, with masses again lumped at selected nodes; sixty modes were included in the analysis. The model of the AFT complex employed thin plate and shell elements to represent the concrete shear walls and floor diaphragms, and beam and truss elements to model the braced frames. Because of the size and complexity of the model, and the potentially large number of degrees of freedom, masses were lumped at a limited number of node points. These points were selected so as to minimize the effect of the discrete mass distribution on structural response. One hundred and thirteen modes were extracted. A second objective of Project IV was to investigate the effects of uncertainty and variability on structural response. To this end, four side studies were conducted. Three of them, briefly summarized in this volume, addressed themselves respectively to an investigation of sources of random variability in the dynamic response of nuclear power plant structures; formulation of a methodology for modeling and evaluating the effects of structural uncertainty on predicted modal characteristics of major nuclear power plant structures and substructures; and a preliminary evaluation of nonlinear responses in shear-wall structures. A fourth side study, reported in detail in this volume, quantified variations in dynamic characteristics and seismic

  5. Cancer Research Participation Beliefs and Behaviors of a Southern Black Population: A Quantitative Analysis of the Role of Structural Factors in Cancer Research Participation.

    Science.gov (United States)

    Farr, Deeonna E; Brandt, Heather M; Comer, Kimberly D; Jackson, Dawnyéa D; Pandya, Kinjal; Friedman, Daniela B; Ureda, John R; Williams, Deloris G; Scott, Dolores B; Green, Wanda; Hébert, James R

    2015-09-01

    Increasing the participation of Blacks in cancer research is a vital component of a strategy to reduce racial inequities in cancer burden. Community-based participatory research (CBPR) is especially well-suited to advancing our knowledge of factors that influence research participation to ultimately address cancer-related health inequities. A paucity of literature focuses on the role of structural factors limiting participation in cancer research. As part of a larger CBPR project, we used survey data from a statewide cancer needs assessment of a Black faith community to examine the influence of structural factors on attitudes toward research and the contributions of both structural and attitudinal factors on whether individuals participate in research. Regression analyses and non-parametric statistics were conducted on data from 727 adult survey respondents. Structural factors, such as having health insurance coverage, experiencing discrimination during health care encounters, and locale, predicted belief in the benefits, but not the risks, of research participation. Positive attitudes toward research predicted intention to participate in cancer research. Significant differences in structural and attitudinal factors were found between cancer research participants and non-participants; however, directionality is confounded by the cross-sectional survey design and causality cannot be determined. This study points to complex interplay of structural and attitudinal factors on research participation as well as need for additional quantitative examinations of the various types of factors that influence research participation in Black communities.

  6. Research Associate | Center for Cancer Research

    Science.gov (United States)

    PROGRAM DESCRIPTION The Basic Science Program (BSP) pursues independent, multidisciplinary research in basic and applied molecular biology, immunology, retrovirology, cancer biology, and human genetics. Research efforts and support are an integral part of the Center for Cancer Research (CCR) at the Frederick National Laboratory for Cancer Research (FNLCR). KEY ROLES/RESPONSIBILITIES - Research Associate III Dr. Zbigniew Dauter is the head investigator of the Synchrotron Radiation Research Section (SRRS) of CCR’s Macromolecular Crystallography Laboratory. The Synchrotron Radiation Research Section is located at Argonne National Laboratory, Argonne, Illinois; this is the site of the largest U.S. synchrotron facility. The SRRS uses X-ray diffraction technique to solve crystal structures of various proteins and nucleic acids of biological and medical relevance. The section is also specializing in analyzing crystal structures at extremely high resolution and accuracy and in developing methods of effective diffraction data collection and in using weak anomalous dispersion effects to solve structures of macromolecules. The areas of expertise are: Structural and molecular biology Macromolecular crystallography Diffraction data collection Dr. Dauter requires research support in these areas, and the individual will engage in the purification and preparation of samples, crystallize proteins using various techniques, and derivatize them with heavy atoms/anomalous scatterers, and establish conditions for cryogenic freezing. Individual will also participate in diffraction data collection at the Advanced Photon Source. In addition, the candidate will perform spectroscopic and chromatographic analyses of protein and nucleic acid samples in the context of their purity, oligomeric state and photophysical properties.

  7. Visualisation and research strategy for computational spatial and structural design interaction

    NARCIS (Netherlands)

    Peeten, D.; Hofmeyer, H.; Thabet, W

    2010-01-01

    A research engine is under development for studying the interaction of spatial and structural design processes. The design processes are being implemented as two separate configurable transformation steps; a conversion step and an optimisation step. A significant part of the spatial-to-structural

  8. Comparative research on the transmission-mode GaAs photocathodes of exponential-doping structures

    International Nuclear Information System (INIS)

    Chen Liang; Qian Yun-Sheng; Zhang Yi-Jun; Chang Ben-Kang

    2012-01-01

    Early research has shown that the varied doping structures of the active layer of GaAs photocathodes have been proven to have a higher quantum efficiency than uniform doping structures. On the basis of our early research on the surface photovoltage of GaAs photocathodes, and comparative research before and after activation of reflection-mode GaAs photocathodes, we further the comparative research on transmission-mode GaAs photocathodes. An exponential doping structure is the typical varied doping structure that can form a uniform electric field in the active layer. By solving the one-dimensional diffusion equation for no equilibrium minority carriers of transmission-mode GaAs photocathodes of the exponential doping structure, we can obtain the equations for the surface photovoltage (SPV) curve before activation and the spectral response curve (SRC) after activation. Through experiments and fitting calculations for the designed material, the body-material parameters can be well fitted by the SPV before activation, and proven by the fitting calculation for SRC after activation. Through the comparative research before and after activation, the average surface escape probability (SEP) can also be well fitted. This comparative research method can measure the body parameters and the value of SEP for the transmission-mode GaAs photocathode more exactly than the early method, which only measures the body parameters by SRC after activation. It can also help us to deeply study and exactly measure the parameters of the varied doping structures for transmission-mode GaAs photocathodes, and optimize the Cs-O activation technique in the future. (electromagnetism, optics, acoustics, heat transfer, classical mechanics, and fluid dynamics)

  9. The Latent Structure of Psychopathy in Youth: A Taxometric Investigation

    Science.gov (United States)

    Vasey, Michael W.; Kotov, Roman; Frick, Paul J.; Loney, Bryan R.

    2005-01-01

    Using taxometric procedures, the latent structure of psychopathy was investigated in two studies of children and adolescents. Prior studies have identified a taxon (i.e., a natural category) associated with antisocial behavior in adults as well as children and adolescents. However, features of this taxon suggest that it is not psychopathy but…

  10. The structure and extent of data files for research management and planning

    International Nuclear Information System (INIS)

    Jankowski, L.

    1981-01-01

    The paper is concerned with the structure and extent of the data files which are necessary for the efficient planning and management of a research institute. An analysis is made of the interrelations between decision-making and the amount of information, its content and structure, including consequences to be drawn for planning an in-house data bank for an institute. Special emphasis is placed on the type and structure of data files. The interrelations of the individual data with each other, the frequency of access and the necessity of involving individual agencies and services providing research guidance. (author)

  11. Large scale seismic test research at Hualien site in Taiwan. Results of site investigation and characterization of the foundation ground

    International Nuclear Information System (INIS)

    Okamoto, Toshiro; Kokusho, Takeharu; Nishi, Koichi

    1998-01-01

    An international joint research program called ''HLSST'' is under way. Large-Scale Seismic Test (LSST) is to be conducted to investigate Soil-Structure Interaction (SSI) during large earthquakes in the field in Hualien, a high seismic region in Taiwan. A 1/4-scale model building was constructed on the excavated gravelly ground, and the backfill material of crushed stones was placed around the model plant. The model building and the foundation ground were extensively instrumented to monitor structure and ground response. To accurately evaluate SSI during earthquakes, geotechnical investigation and forced vibration test were performed during construction process namely before/after the base excavation, after the structure construction and after the backfilling. Main results are as follows. (1) The distribution of the mechanical properties of the gravelly soil are measured by various techniques including penetration tests and PS-logging and it found that the shear wave velocities (Vs) change clearly and it depends on changing overburden pressures during the construction process. (2) Measuring Vs in the surrounding soils, it found that the Vs is smaller than that at almost same depth in the farther location. Discussion is made further on the numerical soil model for SSI analysis. (author)

  12. 59th Medical Wing Clinical Research Division Clinical Investigations Program Pathology Poster

    Science.gov (United States)

    2017-04-28

    59 MDW/SGVU SUBJECT: Professional Presentation Approval 1. Your paper, entitled 59th Medical Wing Clinical Research Division Clinical Investigations...Program Pathology Poster presented at/published to For hanging in a hallway of the 591h Medical Wing Clinical Research Division, Bldg 4430 in...Graduate Health Sciences Education student and your department has told you they cannot fund your publication, the 59th Clinical Research Division may

  13. Advanced fluidic handling and use of two-phase flow for high throughput structural investigation of proteins on a microfluidic sample preparation platform

    DEFF Research Database (Denmark)

    Lafleur, Josiane P.; Snakenborg, Detlef; Møller, M.

    2010-01-01

    Research on the structure of proteins can bring forth a wealth of information about biological function and can be used to better understand the processes in living cells. This paper reports a new microfluidic sample preparation system for the structural investigation of proteins by Small Angle X......-ray Scattering (SAXS). The system includes hardware and software features for precise fluidic control, synchrotron beamline control, UV absorbance measurements and automated data analysis. The precise fluidic handling capabilities are used to transport and precisely position samples as small as 500 n...

  14. Research Instrumentation for Investigating Vibration Delocalization and Control of Nearly Periodic Structures via Piezoelectric Networks

    National Research Council Canada - National Science Library

    Wang, Kon-Well

    2002-01-01

    The overall goal of this DURIP project is to acquire major facilities that are critical in the development of a comprehensive experimental testbed for advancing the technology of low vibration periodic structures (e.g...

  15. Population age structure and asset returns: an empirical investigation.

    Science.gov (United States)

    Poterba, J M

    1998-10-01

    "This paper investigates the association between population age structure, particularly the share of the population in the 'prime saving years' 45-60, and the returns on stocks and bonds. The paper is motivated by the claim that the aging of the 'Baby Boom' cohort in the United States is a key factor in explaining the recent rise in asset values. It also addresses the associated claim that asset prices will decline when this large cohort reaches retirement age and begins to reduce its asset holdings. This paper begins by considering household age-asset accumulation profiles. Data from the Survey of Consumer Finances suggest that while cross-sectional age-wealth profiles peak for households in their early 60s, cohort data on the asset ownership of the same households show a much less pronounced peak.... The paper then considers the historical relationship between demographic structure and real returns on Treasury bills, long-term government bonds, and corporate stock. The results do not suggest any robust relationship between demographic structure and asset returns.... The paper concludes by discussing factors such as international capital flows and forward-looking behavior on the part of market participants that could weaken the relationship between age structure and asset returns in a single nation." excerpt

  16. Video elicitation interviews: a qualitative research method for investigating physician-patient interactions.

    Science.gov (United States)

    Henry, Stephen G; Fetters, Michael D

    2012-01-01

    We describe the concept and method of video elicitation interviews and provide practical guidance for primary care researchers who want to use this qualitative method to investigate physician-patient interactions. During video elicitation interviews, researchers interview patients or physicians about a recent clinical interaction using a video recording of that interaction as an elicitation tool. Video elicitation is useful because it allows researchers to integrate data about the content of physician-patient interactions gained from video recordings with data about participants' associated thoughts, beliefs, and emotions gained from elicitation interviews. This method also facilitates investigation of specific events or moments during interactions. Video elicitation interviews are logistically demanding and time consuming, and they should be reserved for research questions that cannot be fully addressed using either standard interviews or video recordings in isolation. As many components of primary care fall into this category, high-quality video elicitation interviews can be an important method for understanding and improving physician-patient interactions in primary care.

  17. Video Elicitation Interviews: A Qualitative Research Method for Investigating Physician-Patient Interactions

    Science.gov (United States)

    Henry, Stephen G.; Fetters, Michael D.

    2012-01-01

    We describe the concept and method of video elicitation interviews and provide practical guidance for primary care researchers who want to use this qualitative method to investigate physician-patient interactions. During video elicitation interviews, researchers interview patients or physicians about a recent clinical interaction using a video recording of that interaction as an elicitation tool. Video elicitation is useful because it allows researchers to integrate data about the content of physician-patient interactions gained from video recordings with data about participants’ associated thoughts, beliefs, and emotions gained from elicitation interviews. This method also facilitates investigation of specific events or moments during interactions. Video elicitation interviews are logistically demanding and time consuming, and they should be reserved for research questions that cannot be fully addressed using either standard interviews or video recordings in isolation. As many components of primary care fall into this category, high-quality video elicitation interviews can be an important method for understanding and improving physician-patient interactions in primary care. PMID:22412003

  18. Research on the Flow Field and Structure Optimization in Cyclone Separator with Downward Exhaust Gas

    Directory of Open Access Journals (Sweden)

    Wang Weiwei

    2017-01-01

    Full Text Available A numerical software analysis of the turbulent and strongly swirling flow field of a cyclone separator with downward exhaust gas and its performances is described. The ANSYS 14.0 simulations based on DPM model are also used in the investigation. A new set of geometrical design has been optimized to achieve minimum pressure drop and maximum separation efficiency. A comparison of numerical simulation of the new design confirm the superior performance of the new design compared to the conventional design. The influence of the structure parameters such as the length of the guide pipe, the shape of the guide, the inlet shape on the separation performance was analyzed in this research. This research result has certain reference value for cyclone separator design and performance optimization.

  19. Compression and Injection Moulding of Nano-Structured Polymer Surfaces

    DEFF Research Database (Denmark)

    Pranov, Henrik; Rasmussen, Henrik Koblitz

    2006-01-01

    In our research we investigate the non-isothermal replication of complex nano and micro surface structures in injection and compression moulding.......In our research we investigate the non-isothermal replication of complex nano and micro surface structures in injection and compression moulding....

  20. Intercomparison of analysis methods for seismically isolated nuclear structures. Papers and working materials presented at the 3. research coordination meeting

    International Nuclear Information System (INIS)

    1998-01-01

    The Coordinated research program on Intercomparison of analysis methods for seismically isolated nuclear structures involved participants from Italy, Japan, Republic of Korea, Russia, United Kingdom, USA, EC. The purpose of the meeting was to review the progress on the finite element prediction of the force-deformation behaviour of seismic isolators and to discuss the first set of analytical results for the prediction of the response of base-oscillated structures to earthquake inputs. The intercomparison of predictions of bearing behaviour has identified important unexpected issues requiring deeper investigation

  1. Theoretical research on the propagation of the crack normal to and dwelling on the interface of the cermet cladding material structure

    International Nuclear Information System (INIS)

    Junru, Yang; Chuanjuan, Song; Minglan, Wang; Yeukan, Zhang; Jing, Sun

    2016-01-01

    The interface crack propagation problem in the cermet cladding material structure was studied. A comparative propagation property parameter (CP) suitable to judge the propagation direction of the interface crack in the cermet cladding material structure was proposed. The interface crack propagation criterion was established. Theoretical models of the CPs for the crack normal to and dwelling on the interface deflecting separately into the clad, the interface and the substrate were built, and the relations between the CPs and the load action angle, the clad thickness ratio and the load were investigated with an example. The research results show that, under the research conditions, the interface crack will more easily propagate into the clad layer than into the substrate

  2. Theoretical research on the propagation of the crack normal to and dwelling on the interface of the cermet cladding material structure

    Energy Technology Data Exchange (ETDEWEB)

    Junru, Yang; Chuanjuan, Song; Minglan, Wang; Yeukan, Zhang; Jing, Sun [College of Mechanical and Electronic Engineering, Shandong University of Science and Technology, Qingdao (China)

    2016-01-15

    The interface crack propagation problem in the cermet cladding material structure was studied. A comparative propagation property parameter (CP) suitable to judge the propagation direction of the interface crack in the cermet cladding material structure was proposed. The interface crack propagation criterion was established. Theoretical models of the CPs for the crack normal to and dwelling on the interface deflecting separately into the clad, the interface and the substrate were built, and the relations between the CPs and the load action angle, the clad thickness ratio and the load were investigated with an example. The research results show that, under the research conditions, the interface crack will more easily propagate into the clad layer than into the substrate.

  3. 75 FR 11936 - Unit Structures LLC, Magnolia, AR; Notice of Termination of Investigation

    Science.gov (United States)

    2010-03-12

    ... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-70,367] Unit Structures LLC, Magnolia, AR; Notice of Termination of Investigation Pursuant to Section 223 of the Trade Act of 1974, as... Arkansas Rapid Response Coordinator on behalf of workers of Unit Structures LLC, Magnolia, Arkansas. The...

  4. Socio-Cultural Imbalances in AIED Research: Investigations, Implications and Opportunities

    Science.gov (United States)

    Blanchard, Emmanuel G.

    2015-01-01

    This paper investigates international representations in the Artificial Intelligence in Education (AIED) research field. Its methodological and theoretical groundings are inspired by Arnett (2008) and Henrich et al. (2010a) who addressed the same issue in psychology, and respectively a) discovered massive imbalances in representation in top-tier…

  5. Structural investigation of GaInP nanowires using X-ray diffraction

    DEFF Research Database (Denmark)

    Kriegner, D.; Persson, Johan Mikael; Etzelstorfer, T.

    2013-01-01

    In this work the structure of ternary GaxIn1−xP nanowires is investigated with respect to the chemical composition and homogeneity. The nanowires were grown by metal–organic vapor-phase epitaxy. For the investigation of ensemble fluctuations on several lateral length scales, X-ray diffraction...... gradients along the sample by recording diffraction patterns at different positions. In addition, compositional variations were found also within single nanowires in X-ray energy dispersive spectroscopy measurements....

  6. Research Review: Structural Language in Autistic Spectrum Disorder--Characteristics and Causes

    Science.gov (United States)

    Boucher, Jill

    2012-01-01

    Background: Structural language anomalies or impairments in autistic spectrum disorder (ASD) are theoretically and practically important, although underrecognised as such. This review aims to highlight the ubiquitousness of structural language anomalies and impairments in ASD, and to stimulate investigation of their immediate causes and…

  7. Developing a spinal cord injury research strategy using a structured process of evidence review and stakeholder dialogue. Part II: Background to a research strategy.

    Science.gov (United States)

    Bragge, P; Piccenna, L; Middleton, J; Williams, S; Creasey, G; Dunlop, S; Brown, D; Gruen, R

    2015-10-01

    Literature review/semi-structured interviews. To develop a spinal cord injury (SCI) research strategy for Australia and New Zealand. Australia. The National Trauma Research Institute Forum approach of structured evidence review and stakeholder consultation was employed. This involved gathering from published literature and stakeholder consultation the information necessary to properly consider the challenge, and synthesising this into a briefing document. A research strategy 'roadmap' was developed to define the major steps and key planning questions to consider; next, evidence from published SCI research strategy initiatives was synthesised with information from four one-on-one semi-structured interviews with key SCI research stakeholders to create a research strategy framework, articulating six key themes and associated activities for consideration. These resources, combined with a review of SCI prioritisation literature, were used to generate a list of draft principles for discussion in a structured stakeholder dialogue meeting. The research strategy roadmap and framework informed discussion at a structured stakeholder dialogue meeting of 23 participants representing key SCI research constituencies, results of which are published in a companion paper. These resources could also be of value in other research strategy or planning exercises. This project was funded by the Victorian Transport Accident Commission and the Australian and New Zealand Spinal Cord Injury Network.

  8. Investigating the Structure-Activity Relationship of the Insecticidal Natural Product Rocaglamide.

    Science.gov (United States)

    Hall, Roger G; Bruce, Ian; Cooke, Nigel G; Diorazio, Louis J; Cederbaum, Fredrik; Dobler, Markus R; Irving, Ed

    2017-12-01

    The natural product Rocaglamide (1), isolated from the tree Aglaia elliptifolia, is a compelling but also challenging lead structure for crop protection. In laboratory assays, the natural product shows highly interesting insecticidal activity against chewing pests and beetles, but also phytotoxicity on some crop plants. Multi-step syntheses with control of stereochemistry were required to probe the structure-activity relationship (SAR), and seek simplified analogues. After a significant research effort, just two areas of the molecule were identified which allow modification whilst maintaining activity, as will be highlighted in this paper.

  9. Geosciences research: development of techniques and instruments for investigation geological environments

    International Nuclear Information System (INIS)

    1993-01-01

    In order to understand the geological environment in Japan, new investigation techniques have been developed. These include: 1) Geological techniques for fracture characterization, 2) Nondestructive investigation techniques for detailed geological structure, 3) Instruments for hydraulic characterization, 4) Instruments for hydrochemical characterization. Results so far obtained are: 1) Fractures can be classified by their patterns, 2) The applicability and limitations of conventional geophysical methods were defined, 3) Instruments for measuring very low permeability were successfully developed, 4) Instruments for sampling formation water without changing in-situ conditions were developed. (author)

  10. Investigation on integrity of JMTR concrete structures, cooling system and utility facilities

    International Nuclear Information System (INIS)

    Ebisawa, Hiroyuki; Tobita, Kenji; Fukasaku, Akitomi; Kaminaga, Masanori

    2010-02-01

    The condition of facilities and components to be used for re-operation of the Japan Materials Testing Reactor (JMTR) from FY2011, was investigated before the refurbishment work. An investigation of aged components (aged-investigation) was carried out for concrete structures of the JMTR reactor building, exhaust stack, trench, canal, filter banks and for aged components of tanks in the primary cooling system, heat exchangers, pipes in the secondary cooling system, cooling tower, emergency generators and so on, in order to identify their integrity. The aged-investigation was carried out from the beginning of FY2007. As a result, cracks of concrete structures such as the exhaust stack, a foundation of the UCL (Utility Cooling Line) elevated water tank were repaired and pipe linings of secondary cooling system were replaced. Motors of primary cooling pumps, pumps in the secondary cooling system and in other systems were decided to replace from viewpoints of future maintenance and improvement of reliability. Other components and the reactor building were decided to use continuously for a long-term by appropriate maintenance activities based on the long-term maintenance plan. In this paper, the aged-investigation for the JMTR reactor building, heat exchangers and emergency generators is presented. (author)

  11. Structural Stigma and Health Inequalities: Research Evidence and Implications for Psychological Science

    Science.gov (United States)

    Hatzenbuehler, Mark L.

    2016-01-01

    Psychological research has provided essential insights into how stigma operates to disadvantage those who are targeted by it. At the same time, stigma research has been criticized for being too focused on the perceptions of stigmatized individuals and on micro-level interactions, rather than attending to structural forms of stigma. This article describes the relatively new field of research on structural stigma, which is defined as societal-level conditions, cultural norms, and institutional policies that constrain the opportunities, resources, and wellbeing of the stigmatized. I review emerging evidence that structural stigma related to mental illness and sexual orientation (1) exerts direct and synergistic effects on stigma processes that have long been the focus of psychological inquiry (e.g., concealment, rejection sensitivity); (2) serves as a contextual moderator of the efficacy of psychological interventions; and (3) contributes to numerous adverse health outcomes for members of stigmatized groups—ranging from dysregulated physiological stress responses to premature mortality—indicating that structural stigma represents an under-recognized mechanism producing health inequalities. Each of these pieces of evidence suggests that structural stigma is relevant to psychology and therefore deserves the attention of psychological scientists interested in understanding and ultimately reducing the negative effects of stigma. PMID:27977256

  12. Research Capacity at Traditional Chinese Medicine (TCM) Centers in China: A Survey of Clinical Investigators.

    Science.gov (United States)

    Feng, Shuo; Han, Mei; Lai, Lily; Wang, Si-Cheng; Liu, Jian-Ping

    2017-01-01

    Background. The development of an evidence-based approach to traditional Chinese medicine (TCM), which depends on the generation of good quality evidence, requires an adequate workforce. However, the research capacity of TCM investigators is not known. Study Design. This cross-sectional study was conducted to describe the research capacity of TCM clinical investigators in China. Participants. A total of 584 participants from TCM hospitals and research centers were included. They were asked about the academic and research characteristics, needs for research capacity building, and barriers to clinical research. Results. The majority (80.82%) were qualified to at least a Master's degree, whilst a smaller proportion (40.24%) held a senior professional title. We found that academic outputs were low with the majority (62.16%) authoring less than five publications in total. The most pressing needs for building research capacity identified were training in research methodology (97.43%) and identification of research questions (86.81%), whilst the highest ranking barriers to conducting research were limited motivation, funding (40.72%), and time (37.15%). Conclusion. The methodology training, along with investment in the research workforce, needs to be urgently addressed to improve investigators' research capacity and the development of an evidence-based approach of TCM.

  13. PHIRE (Public Health Innovation and Research in Europe): methods, structures and evaluation.

    Science.gov (United States)

    Barnhoorn, Floris; McCarthy, Mark; Devillé, Walter; Alexanderson, Kristina; Voss, Margaretha; Conceição, Claudia

    2013-11-01

    Public Health Innovation and Research in Europe (PHIRE), building on previous European collaborative projects, was developed to assess national uptake and impacts of European public health innovations, to describe national public health research programmes, strategies and structures and to develop participation of researchers through the organizational structures of the European Public Health Association (EUPHA). This article describes the methods used. PHIRE was led by EUPHA with seven partner organisations over 30 months. It was conceived to engage the organisation of EUPHA--working through its thematic Sections, and through its national public health associations--and assess innovation and research across 30 European countries. Public health research was defined broadly as health research at population and organisational level. There were seven Work Packages (three covering coordination and four for technical aspects) led by partners and coordinated through management meetings. Seven EUPHA Sections identified eight innovations within the projects funded by the Public Health Programme of the European Commission Directorate for Health and Consumers. Country informants, identified through EUPHA thematic Sections, reported on national uptake of the innovations in eight public health projects supported by the European Union Public Health Programme. Four PHIRE partners, each taking a regional sector of Europe, worked with the public health associations and other informants to describe public health research programmes, calls and systems. A classification was created for the national public health research programmes and calls in 2010. The internal and external evaluations were supportive. PHIRE described public health innovations and research across Europe through national experts. More work is needed to conceptualize and define public health 'innovations' and to develop theories and methods for the assessment of their uptake and impacts at country and cross

  14. ORGANIZATIONAL STRUCTURE OF RESEARCH PROJECT ACTIVITIES PERFORMED AT MEDICAL UNIVERSITIES IN BULGARIA.

    Directory of Open Access Journals (Sweden)

    Svetoslav Garov

    2013-07-01

    Full Text Available Introduction: There are five Bulgarian medical universities in the cities of Sofia, Plovdiv, Varna, Pleven and Stara Zagora. A major priority of medical universities is to encourage research activities mainly aimed at preparation and implementation of research projects. Projects are managed by the participating organizations called “beneficiaries”. Beneficiaries develop projects, apply for finances and if approved they implement those projects.Aim: The purpose of our study is to examine the organizational structure of research project activities on the macro level and on the micro level in Bulgarian medical universities.Material and methods: In order to define the separate elements of the organizational structure and to analyze the relations and interaction between them we have applied a documentary and sociological approach. Results: During the last six years there was a significant increase in the number and the overall annual financial value of the projects performed at medical universities in Bulgaria. The reasons for such increase are: managers realizing the advantages of and benefits from the implementation of research projects ensuring high quality modernization of research units’ equipment and facilities; access to innovative technologies; development of interdisciplinary relations, etc. Benefits arising from improved results motivate us to consider as appropriate some additional investments aimed at increasing the number of team members and further optimization of the currently existing structures (research centers in charge of research with the purpose of achieving even better results in this particular field. Conclusion: The role of research project activities in medical universities’ research field is of vital importance for the educational institutions’ success. Taking into consideration the changed conditions, European possibilities and the highly competitive environment, realizing this aspect will be essential for the

  15. First principles investigation of the structure of a bacteriochlorophyll crystal

    Energy Technology Data Exchange (ETDEWEB)

    Marchi, M. [Max-Planck-Institut fuer Festkoerperforschung, Stuttgart (Germany)]|[Centre d`Etudes Saclay, Gif-sur-Yvette (France); Hutter, J.; Parrinello, M. [Max-Planck-Institut fuer Festkoerperforschung, Stuttgart (Germany)

    1996-08-21

    In this communication we present an ab initio study of the crystal of methyl bacteriophorbide (MeBPheo) a, a bacteriochlorophyll derivative, and high-precision structure of which is available. Our main purpose has been to investigate the viability of the technique toward complex molecular systems relevant to biologically important phenomena, in this particular case photosynthesis. Here we present the following results: First, we show that DFT is capable of calculating nuclear positions in excellent agreement with the experimental X-ray structure. Second, the calculated electronic density of the HOMO orbital reveals a {pi} type bond between rings I and III, consistent with the one-dimensional chain structure of the MeBPheo a molecules in the crystal. Finally, after performing the optimization of the molecular geometry with one electron in the LUMO state, we find localized bond length changes near the ring II of the MeBPheo a. 19 refs., 3 figs.

  16. Building Investigation: Material or Structural Performance

    Directory of Open Access Journals (Sweden)

    Yusof M.Z.

    2014-03-01

    Full Text Available Structures such as roof trusses will not suddenly collapse without ample warning such as significant deflection, tilting etc. if the designer manages to avoid the cause of structural failure at the material level and the structural level. This paper outlines some principles and procedures of PDCA circle and QC tools which can show some clues of structural problems in terms of material or structural performance

  17. Structural and Electronic Investigations of Complex Intermetallic Compounds

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Hyunjin [Iowa State Univ., Ames, IA (United States)

    2008-01-01

    In solid state chemistry, numerous investigations have been attempted to address the relationships between chemical structure and physical properties. Such questions include: (1) How can we understand the driving forces of the atomic arrangements in complex solids that exhibit interesting chemical and physical properties? (2) How do different elements distribute themselves in a solid-state structure? (3) Can we develop a chemical understanding to predict the effects of valence electron concentration on the structures and magnetic ordering of systems by both experimental and theoretical means? Although these issues are relevant to various compound classes, intermetallic compounds are especially interesting and well suited for a joint experimental and theoretical effort. For intermetallic compounds, the questions listed above are difficult to answer since many of the constituent atoms simply do not crystallize in the same manner as in their separate, elemental structures. Also, theoretical studies suggest that the energy differences between various structural alternatives are small. For example, Al and Ga both belong in the same group on the Periodic Table of Elements and share many similar chemical properties. Al crystallizes in the fcc lattice with 4 atoms per unit cell and Ga crystallizes in an orthorhombic unit cell lattice with 8 atoms per unit cell, which are both fairly simple structures (Figure 1). However, when combined with Mn, which itself has a very complex cubic crystal structure with 58 atoms per unit cell, the resulting intermetallic compounds crystallize in a completely different fashion. At the 1:1 stoichiometry, MnAl forms a very simple tetragonal lattice with two atoms per primitive unit cell, while MnGa crystallizes in a complicated rhombohedral unit cell with 26 atoms within the primitive unit cell. The mechanisms influencing the arrangements of atoms in numerous crystal structures have been studied theoretically by calculating electronic

  18. Structural, elastic, mechanical and thermodynamic properties of Terbium oxide: First-principles investigations

    Directory of Open Access Journals (Sweden)

    Samah Al-Qaisi

    Full Text Available First-principles investigations of the Terbium oxide TbO are performed on structural, elastic, mechanical and thermodynamic properties. The investigations are accomplished by employing full potential augmented plane wave FP-LAPW method framed within density functional theory DFT as implemented in the WIEN2k package. The exchange-correlation energy functional, a part of the total energy functional, is treated through Perdew Burke Ernzerhof scheme of the Generalized Gradient Approximation PBEGGA. The calculations of the ground state structural parameters, like lattice constants a0, bulk moduli B and their pressure derivative B′ values, are done for the rock-salt RS, zinc-blende ZB, cesium chloride CsCl, wurtzite WZ and nickel arsenide NiAs polymorphs of the TbO compound. The elastic constants (C11, C12, C13, C33, and C44 and mechanical properties (Young’s modulus Y, Shear modulus S, Poisson’s ratio σ, Anisotropic ratio A and compressibility β, were also calculated to comprehend its potential for valuable applications. From our calculations, the RS phase of TbO compound was found strongest one mechanically amongst the studied cubic structures whereas from hexagonal phases, the NiAs type structure was found stronger than WZ phase of the TbO. To analyze the ductility of the different structures of the TbO, Pugh’s rule (B/SH and Cauchy pressure (C12–C44 approaches are used. It was found that ZB, CsCl and WZ type structures of the TbO were of ductile nature with the obvious dominance of the ionic bonding while RS and NiAs structures exhibited brittle nature with the covalent bonding dominance. Moreover, Debye temperature was calculated for both cubic and hexagonal structures of TbO in question by averaging the computed sound velocities. Keywords: DFT, TbO, Elastic properties, Thermodynamic properties

  19. Investigating the Reliability and Factor Structure of Kalichman's "Survey 2: Research Misconduct" Questionnaire: A Post Hoc Analysis Among Biomedical Doctoral Students in Scandinavia.

    Science.gov (United States)

    Holm, Søren; Hofmann, Bjørn

    2017-10-01

    A precondition for reducing scientific misconduct is evidence about scientists' attitudes. We need reliable survey instruments, and this study investigates the reliability of Kalichman's "Survey 2: research misconduct" questionnaire. The study is a post hoc analysis of data from three surveys among biomedical doctoral students in Scandinavia (2010-2015). We perform reliability analysis, and exploratory and confirmatory factor analysis using a split-sample design as a partial validation. The results indicate that a reliable 13-item scale can be formed (Cronbach's α = .705), and factor analysis indicates that there are four reliable subscales each tapping a different construct: (a) general attitude to misconduct (α = .768), (b) attitude to personal misconduct (α = .784), (c) attitude to whistleblowing (α = .841), and (d) attitude to blameworthiness/punishment (α = .877). A full validation of the questionnaire requires further research. We, nevertheless, hope that the results will facilitate the increased use of the questionnaire in research.

  20. Review of research on the hygrothermal environmental durability of structural adhesively bonded joints

    Directory of Open Access Journals (Sweden)

    Xiao HAN

    2017-06-01

    Full Text Available In recent years, structural adhesive bonding technology has been widely used in many industrial fields, with many advantages over traditional mechanical connection methods, such as riveting, welding and bolt connection. Due to the adhesive characteristics of polymer materials, the environmental durability of adhesive joint becomes the key problems in engineering structure connection feasibility and long-term service reliability. On the basis of the review of the research of the hot-humid environmental durability of structural adhesive joints, the effects of temperature, moisture and coupled condition on the structural mechanical behaviour are discussed, introducing the published research progress and results both at home and abroad. The prospects are provided: the future research work can be combined with a variety of observation scales of environmental aging test and numerical simulation method, delve into sub hygroscopic, creep, thermal expansion and hygroscopic expansion aging behavior, such as the environment of model prediction method simulation in more than a variety of mechanical performance degradation behavior of coupling conditions, and provide more reliable theoretical modeling and experimental data for engineering design and application of cementing structure.

  1. Investigations of the structure and electromagnetic interactions of few-body systems

    International Nuclear Information System (INIS)

    Lehman, D.R.; Haberzettl, H.; Maximon, L.C.; Parke, W.C.

    1992-07-01

    In order to make it easy for the reader to see the specific research carried out and the progress made, the following report of progress is done by topic. Each item has a format layout of Topic, Investigators, Objective, Significance, and Description of Progress, followed at the end by the relevant references. As is clear from the topics listed, the emphasis of the George Washington University (GWU) theory group has been on the structure and electromagnetic interactions of few-body nuclei. Both low- and intermediate-energy electromagnetic disintegration of these nuclei is considered. When the excitation energy of the target nucleus is low, the aim has been to handle the continuum part of the theoretical work numerically with no approximations, that is, by means of full three- or four-body dynamics. When structure questions axe the issue, numerically accurate calculations axe always carried through, limited only by the underlying two-body or three-body interactions used as input. Implicit in our work is the question of how far one can go within the traditional nuclear physics framework, i.e., nucleons and mesons in a nonrelativistic setting. Our central goal is to carry through state-of-the-art fewbody calculations that wig serve as a means of determining at what point standard nuclear physics requires quark degrees of freedom in order to understand the phenomena in question. So far, in the problems considered, there has been no evidence of the necessity to go beyond the traditional approach, though we always keep in mind that possibility. As our work is involved with questions in the intermediate-energy realm, moving from a nonrelativistic framework to a relativistic one is always a consideration. Currently, for the problems that have been pursued in this domain of energy, the issues concern far more the mechanisms of the reactions and structural questions than the need to move to relativistic dynamics

  2. The Intellectual Structure of Research on Educational Technology in Science Education (ETiSE): A Co-Citation Network Analysis of Publications in Selected Journals (2008-2013)

    Science.gov (United States)

    Tang, Kai-Yu; Tsai, Chin-Chung

    2016-01-01

    The main purpose of this paper is to investigate the intellectual structure of the research on educational technology in science education (ETiSE) within the most recent years (2008-2013). Based on the criteria for educational technology research and the citation threshold for educational co-citation analysis, a total of 137 relevant ETiSE papers…

  3. Investigating the interaction of x-ray free electron laser radiation with grating structure

    NARCIS (Netherlands)

    Gaudin, J.; Ozkan, C.; Chalupsky, J.; Bajt, S.; Burian, T.; Vysin, L.; Coppola, N.; Farahani, S. D.; Chapman, H. N.; Galasso, G.; Hajkova, V.; Harmand, M.; Juha, L.; Jurek, M.; Loch, R. A.; Möller, S.; Nagasono, M.; Stormer, M.; Sinn, H.; Saksl, K.; Sobierajski, R.; Schulz, J.; Sovak, P.; Toleikis, S.; Tiedtke, K.; Tschentscher, T.; Krzywinski, J.

    2012-01-01

    The interaction of free electron laser pulses with grating structure is investigated using 4.6 +/- 0.1 nm radiation at the FLASH facility in Hamburg. For fluences above 63.7 +/- 8.7 mJ/cm(2), the interaction triggers a damage process starting at the edge of the grating structure as evidenced by

  4. Structural investigations on differently sized monodisperse iron oxide nanoparticles synthesized by remineralization of apoferritin molecules

    International Nuclear Information System (INIS)

    Ullrich, Aladin; Horn, Siegfried

    2013-01-01

    We have investigated the structure of iron oxide nanoparticles produced by remineralization and thermal treatment of horse spleen apoferritin molecules. The described procedure allows to synthesize particles with diameters ranging from 4 to 7 nm in size. Atomic force microscopy and transmission electron microscopy (TEM) investigations were performed for shape and size determination, whereas energy-dispersive X-ray (TEM-EDX), high-resolution TEM, and electron diffraction measurements revealed the chemical composition and crystal structure of the particles. We found predominantly single crystalline nanoparticles with a hematite-like (α-Fe 2 O 3 ) structure

  5. THE STRUCTURE ANALYTICAL RESEARCH OF POROUS PERMEABLE WIRE MATERIAL (in Russian

    Directory of Open Access Journals (Sweden)

    Andrzej JAKUBOWSKI

    2016-04-01

    Full Text Available The details of making technology of porous permeable material with use of wire are allowed to carry out the analytical research of structure and structural characteristics of wire winding body. Its permit for prognostication the final proper-ties of material, that is produced by the following deformation treatment (diameter reduction. Due to the regular orga-nized arrangement of wire, the coil of winding body is considered as a multispan continuous beam, but a contact of coils – as interaction of two cylinders. Possibility of exactly calculation of the contacts between coils is allowed to go over the single fragment displacements into deformation of whole winding body. During research of deformation processes in regards of winding body geometry and used wire mechanical properties, the structural characteristics of porous permea-ble wire material are expected. The optimal number of winding layers, eliminating the distortion of organized final struc-ture, is established. The material pressure–compactness relation is obtained in order to control the technological condi-tions of winding and drafting for guarantee the product required properties.

  6. Linking didactics and research in instructional material: A new structural model

    DEFF Research Database (Denmark)

    Graf, Stefan Ting

    2009-01-01

    How can research in instructional materials become more relevant for didactics and instruction planning? And how can general didactics reflect questions developed from a media perspective. These are the guiding questions of the article, which assumes a gap between general didactics and research...... and theory of instructional material. General didactics does not sufficiently incorporate a theory of media, and research and theory in instructional material do not recognise general didactics and apply very different conceptions of instruction in their studies – if at all. Through two approaches we argue...... for a new basic structure in didactics in order to bridge the gap when relevant conclusions for pragmatic didactics are in question. The first approach accounts for the place and status of media in the most known structural theories in general didactics. The second approach argues from another angle...

  7. Investigation of population structure in Gulf of Mexico Seepiophila jonesi (Polychaeta, Siboglinidae using cross-amplified microsatellite loci

    Directory of Open Access Journals (Sweden)

    Chunya Huang

    2016-08-01

    Full Text Available Background Vestimentiferan tubeworms are some of the most recognizable fauna found at deep-sea cold seeps, isolated environments where hydrocarbon rich fluids fuel biological communities. Several studies have investigated tubeworm population structure; however, much is still unknown about larval dispersal patterns at Gulf of Mexico (GoM seeps. As such, researchers have applied microsatellite markers as a measure for documenting the transport of vestimentiferan individuals. In the present study, we investigate the utility of microsatellites to be cross-amplified within the escarpiid clade of seep vestimentiferans, by determining if loci originally developed for Escarpia spp. could be amplified in the GoM seep tubeworm, Seepiophila jonesi. Additionally, we determine if cross-amplified loci can reliably uncover the same signatures of high gene flow seen in a previous investigation of S. jonesi. Methods Seventy-seven S. jonesi individuals were collected from eight seep sites across the upper Louisiana slope (<1,000 m in the GoM. Forty-eight microsatellite loci that were originally developed for Escarpia laminata (18 loci and Escarpia southwardae (30 loci were tested to determine if they were homologous and polymorphic in S. jonesi. Loci found to be both polymorphic and of high quality were used to test for significant population structuring in S. jonesi. Results Microsatellite pre-screening identified 13 (27% of the Escarpia loci were homologous and polymorphic in S. jonesi, revealing that microsatellites can be amplified within the escarpiid clade of vestimentiferans. Our findings uncovered low levels of heterozygosity and a lack of genetic differentiation amongst S. jonesi from various sites and regions, in line with previous investigations that employed species-specific polymorphic loci on S. jonesi individuals retrieved from both the same and different seep sites. The lack of genetic structure identified from these populations supports the

  8. Between Bandura and Giddens: Structuration Theory in Social Psychological Research?

    Directory of Open Access Journals (Sweden)

    Seth Oppong

    2014-10-01

    Full Text Available In any social analysis, one can attribute observed behavioural outcomes to actions and inactions of people (agents or to the presence or absence of certain structures or systems. The dualism of agent and structure is resolved through the concept of duality as proposed by Anthony Giddens in his structuration theory (ST. Though ST has been applied in other disciplines, it is either less known or applied in psychology. This paper sought to examine ST as a framework for understanding the interdependent relationship between structure and agents in the light of offering explanatory framework in social science research or policy formulation. It concluded with an integrated model comprising elements of both Bandura’s social-cognitive theory and Giddens’ ST.

  9. An investigation of the structure of disordered materials by using neutron diffraction

    International Nuclear Information System (INIS)

    Petri, I.

    1999-01-01

    The structure of several semiconducting, metallic and ionic disordered materials was investigated using neutron diffraction and the results were compared with those obtained from recent ab initio molecular dynamics methods. The method of isotopic substitution was applied to measure the full set of partial structure factors, S αβ (Q), for the liquid semiconductor GeSe and the covalent network glass GeSe 2 . Their short range ordering and for GeSe 2 also the intermediate range ordering were identified and a substantial number of 'defects' such as homopolar bonds were detected in both systems. Further, the structure of liquid GeSe 2 with increasing temperature was studied at the total structure factor level. Also, changes in the topology of Ge x Se 1-x glasses in the range 0 ≤ x ≤ 0.4 were observed and investigated by measuring the total structure factors. As far as possible our results were compared with those from molecular dynamics studies. The Ge-Se system was found to serve as a sensitive test-system for these studies, giving an insight into the strengths and limitations of them. For instance, problems are found in the region of the homopolar bonds for g GeGe (r) and for the first sharp diffraction peak in the Bhatia-Thornton concentration-concentration structure factor that could not be reproduced. The structure of liquid lithium was measured and particular attention was paid to the inelasticity and resolution function corrections. The ion-ion and ion-valence electron partial structure factors were obtained and found to be in good agreement with ab initio molecular dynamics studies. The method of first order difference functions in neutron diffraction in combination with H/D substitution was applied to 2 molal solutions of Cu(ClO 4 ) 2 in perchloric acid to measure the Cu-H and, to a first order approximation, the Cu-O partial structure factor. A (4 + 1) distortion of the hydration shell around the Cu 2+ ion was measured. (author)

  10. Chemical structure investigation on SFEF fractions of Dagang vacuum residue

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Z.; Yan, G.; Zhao, S.; Guo, S. [China Univ. of Petroleum, Beijing (China). State Key Laboratory of Heavy Oil Processing; Zhang, Z. [Beijing Aeronautical Technology Research Center, Beijing (China)

    2006-07-01

    One of the most important problems in petroleum chemistry is the molecular structure and composition of heavy oil fractions and its importance in applications pertaining to the recovery, refining, and upgrading of petroleum. This paper presented an investigation into the chemical structure on supercritical fluid extraction and fraction (SFEF) factions of Dagang vacuum residue. Dagang vacuum residue was cut into sixteen fractions and a tailing with SFEF instrument. Then, using a chromatography, all SFEF fractions were further separated into four group compositions, notably saturated hydrocarbons, aromatic hydrocarbons, resins and asphaltenes (SARA). Last, the chemical structure was explored through a thorough analysis of the products from the ruthenium ions-catalyzed oxidation (RICO) reaction of those aromatics, resins and asphaltenes. The paper discussed the experiment in terms of samples and chemicals; supercritical fluid extraction and fraction; SARA separation; and RICO. The results and discussions focused on alkyl side chains attached to aromatic carbon; polymethylene bridges connecting two aromatic units; benzenecarboxylic acids an aromatic units; and others. The study has brought to light useful characterization on covalent molecular structure of two typical SFEF fractions, notably the tenth and fifteen fraction. 17 refs., 6 tabs., 16 figs., 1 appendix.

  11. Systematic review of research investigating psychotherapy and information and communication technologies.

    Science.gov (United States)

    Hallberg, Sílvia Cristina Marceliano; Lisboa, Carolina Saraiva de Macedo; de Souza, Déborah Brandão; Mester, Ariela; Braga, Andréia Zambon; Strey, Artur Marques; da Silva, Camila Sartori

    2015-01-01

    Information and communication technologies (ICTs) are devices, services and knowledge that reproduce, process and distribute information. Psychotherapy has been influenced by these technologies, and there is a tendency for their role to expand. To describe the current panorama of the scientific literature on psychotherapy and ICTs. This is a systematic and descriptive review. Searches were run on the electronic databases Biblioteca Virtual em Saude (BVS), PsycINFO, Scopus, PePSIC, ScienceDirect and Index Psi, using the Boolean operator AND and the descriptors psychotherapy, computers, Internet, cell phones and social networks. A considerable volume of empirical research was found, published recently in many different parts of the world, especially in the United States. There is very little Brazilian research on the subject. The majority of the studies identified assess the efficacy or describe the development of techniques and psychotherapies, via ICTs, for prevention, diagnosis or treatment of mental and behavioral disorders. The psychopathology most investigated in this area is depression and it was not possible to draw conclusions on a possible trend for research into the subject to increase. The technology most investigated was the Internet and cognitive-behavioral therapy was the most common theoretical approach in these studies. Systematic reviews of published studies can detect gaps in the research agenda within a specific field of knowledge.

  12. Systematic review of research investigating psychotherapy and information and communication technologies

    Directory of Open Access Journals (Sweden)

    Sílvia Cristina Marceliano Hallberg

    2015-09-01

    Full Text Available Introduction:Information and communication technologies (ICTs are devices, services and knowledge that reproduce, process and distribute information. Psychotherapy has been influenced by these technologies, and there is a tendency for their role to expand.Objective: To describe the current panorama of the scientific literature on psychotherapy and ICTs.Method: This is a systematic and descriptive review. Searches were run on the electronic databases Biblioteca Virtual em Saude (BVS, PsycINFO, Scopus, PePSIC, ScienceDirect and Index Psi, using the Boolean operator AND and the descriptors psychotherapy, computers, Internet, cell phones and social networks.Results: A considerable volume of empirical research was found, published recently in many different parts of the world, especially in the United States. There is very little Brazilian research on the subject. The majority of the studies identified assess the efficacy or describe the development of techniques and psychotherapies, via ICTs, for prevention, diagnosis or treatment of mental and behavioral disorders. The psychopathology most investigated in this area is depression and it was not possible to draw conclusions on a possible trend for research into the subject to increase. The technology most investigated was the Internet and cognitive-behavioral therapy was the most common theoretical approach in these studies.Conclusions:Systematic reviews of published studies can detect gaps in the research agenda within a specific field of knowledge.

  13. An Investigation of Generic Structures of Pakistani Doctoral Thesis Acknowledgements

    Science.gov (United States)

    Rofess, Sakander; Mahmood, Muhammad Asim

    2015-01-01

    This paper investigates Pakistani doctoral thesis acknowledgements from genre analysis perspective. A corpus of 235 PhD thesis acknowledgements written in English was taken from Pakistani doctoral theses collected from eight different disciplines. HEC Research Repository of Pakistan was used as a data sources. The theses written by Pakistani…

  14. Research into the Energy Output of Asymmetric Cylindrical Structure under Internal Explosion Loading

    Directory of Open Access Journals (Sweden)

    Liangliang Ding

    2018-04-01

    Full Text Available The energy output characteristic of an asymmetric cylindrical structure under internal explosion loading has significant research value in the field of the national defense industry. This paper took the D-shaped structure as the research object. Three groups of experiments (D-90°, D-120°, D-150° were carried out. The D-shaped structure showed that fragments are concentrated in the middle and are sparse on both sides. Moreover, the fragment density decreased with the increase of the azimuth angle. The fragment velocities, which were measured from high-speed photography and an oscilloscope, coincided well with each other, and decreased with an increase in the central angle. Compared with the cylindrical structure, the fragment energy gain of the D-shaped structure is significant; the total energy and energy density of the three D-shaped structures were very close to each other. This indicates that D-120° is the optimal solution among the three D-shaped structures and it can provide guidance for the future design of D-shaped structures to achieve higher energy output.

  15. 21 CFR 312.160 - Drugs for investigational use in laboratory research animals or in vitro tests.

    Science.gov (United States)

    2010-04-01

    ... research animals or in vitro tests. 312.160 Section 312.160 Food and Drugs FOOD AND DRUG ADMINISTRATION... Drugs for Investigational Use in Laboratory Research Animals or In Vitro Tests § 312.160 Drugs for investigational use in laboratory research animals or in vitro tests. (a) Authorization to ship. (1)(i) A person...

  16. Investigation of structural integrity for turbine generator foundation affected by alkali-silica reaction

    International Nuclear Information System (INIS)

    Ryo Fujimoto; Hiroshi Shimizu; Hisashi Sekimoto; Yuichi Watanabe; Tatsuya Ishikawa

    2005-01-01

    Turbine Generator Foundation is a reinforced concrete structure having a table deck to support equipments and columns to support the table deck. After operation of the plant, the expansion of the table deck in turbine longitudinal axis in the structure has been observed. By investigation of concrete material property, it is found that the expansion has been caused by alkali-silica reaction (ASR). In this study, we evaluate the material properties of the structure affected by ASR and safety margin of capacity of the structure by nonlinear analysis using beam element model with those material properties. (authors)

  17. Computational structural mechanics for engine structures

    Science.gov (United States)

    Chamis, C. C.

    1989-01-01

    The computational structural mechanics (CSM) program at Lewis encompasses: (1) fundamental aspects for formulating and solving structural mechanics problems, and (2) development of integrated software systems to computationally simulate the performance/durability/life of engine structures. It is structured to mainly supplement, complement, and whenever possible replace, costly experimental efforts which are unavoidable during engineering research and development programs. Specific objectives include: investigate unique advantages of parallel and multiprocesses for: reformulating/solving structural mechanics and formulating/solving multidisciplinary mechanics and develop integrated structural system computational simulators for: predicting structural performances, evaluating newly developed methods, and for identifying and prioritizing improved/missing methods needed. Herein the CSM program is summarized with emphasis on the Engine Structures Computational Simulator (ESCS). Typical results obtained using ESCS are described to illustrate its versatility.

  18. Research for the physics and structure of earth's crust in Romania

    International Nuclear Information System (INIS)

    Ghitulescu, T.P.; Popescu, M.N.

    1987-10-01

    Systematic research for the deciphering of the physic and structure of Earth's crust in our country by geophysical methods were performed in the frame of Romanian Geological Institute since 1925. We put into evidence the principle achievements obtained by the geological and geophysical research for the mineral resources existing in the Romanian earth's crust. (authors)

  19. An investigation for structure transformation in electric pulse modified liquid aluminum

    Energy Technology Data Exchange (ETDEWEB)

    Qi Jingang, E-mail: Qijingang1974@sina.co [School of Material Science and Engineering, Liaoning University of Technology, Jinzhou 121001 (China); Wang Jianzhong; He Lijia; Zhao Zuofu; Du Huiling [School of Material Science and Engineering, Liaoning University of Technology, Jinzhou 121001 (China)

    2011-02-15

    The electric pulse (EP) modification of liquid metal is a novel method for grain refinement. In this work, the structure tests of EP-modified liquid aluminum were conducted and investigated using high-temperature X-ray diffractometer by virtue of the outstanding structural heredity of EP-modified liquid aluminum. The results show that the EP-modified liquid structure tends to be slack and unordered with increasing temperature similar to that of the unmodified. Nevertheless, the quantitative characterization denoted by the liquid structural parameters exhibits its discrepancy. At the modifying temperature of 750 {sup o}C, the order of degree of EP-modified liquid aluminum is remarkably strengthened and the value of average atomic number per cluster changes from 119 (no EP) up to 174 (EP) by an increase of 46%. These tests experimentally testified Wang's electric pulse modification (EPM) model that was built only by phenomenology, and hereby the mechanism of grain refinement resulting from EPM is further elucidated.

  20. Scientific investigation in deep boreholes at the Meuse/Haute Marne underground research laboratory, northeastern France

    International Nuclear Information System (INIS)

    Rebours, H.; Delay, J.; Vinsot, A.

    2006-01-01

    From 1994 to 1996, the preliminary investigation carried out by Andra, identified a sector favourable for hosting a laboratory in argillaceous Callovo-Oxfordian formation which has a thickness of 130 m and lies more than 400 m below ground level. In November 1999 Andra began building an Underground Research Laboratory (URL) with a 3D seismic survey over 4 km 2 . From 2000 to 2004, large programs of boreholes were carried out on site and on the sector in order to define the characteristics of formations, to improve the regional geological and hydrogeological knowledge and to provide an accurate definition of structural features in Callovo-Oxfordian argillites and Dogger limestones. These drilling programs have provided a fine characterization of the argillites on the laboratory area and a good correlation of geological properties at a sector scale. (author)

  1. Research Trends on Defect and Life Assessment of High Temperature Structure

    International Nuclear Information System (INIS)

    Lee, Hyeong Yeon; Lee Jae Han

    2008-01-01

    This report presents the analysis on the state-of-the-art research trends on defect assessment and life evaluation of high temperature structure based on the papers presented in the two international conferences of ASME PVP 2007 / CREEP 8 which was held in 2007 and ICFDSM VI(International Conference on Fatigue Damage of Structural Materials VI) which was held in 2006

  2. Investigation on Melt-Structure-Water Interactions (MSWI) during severe accidents

    Energy Technology Data Exchange (ETDEWEB)

    Sehgal, B.R.; Yang, Z.L.; Dinh, T.N.; Nourgaliev, R.R.; Bui, V.A.; Haraldsson, H.O.; Li, H.X.; Konovakhin, M.; Paladino, D.; Leung, W.H [Royal Inst. of Tech., Stockholm (Sweden). Div. of Nuclear Power Safety

    1999-08-01

    This report is the final report for the work performed in 1998 in the research project Melt Structure Water Interactions (MSWI), under the auspices of the APRI Project, jointly funded by SKI, HSK, USNRC and the Swedish and Finnish power companies. The present report describes results of advanced analytical and experimental studies concerning melt-water-structure interactions during the course of a hypothetical severe core meltdown accident in a light water reactor (LWR). Emphasis has been placed on phenomena and properties which govern the fragmentation and breakup of melt jets and droplets, melt spreading and coolability, and thermal and mechanical loadings of a pressure vessel during melt-vessel interaction. Many of the investigations performed in support of this project have produced papers which have been published in the proceedings of technical meetings. A short summary of the results achieved in these papers is provided in this overview. Both experimental and analytical studies were performed to improve knowledge about phenomena of melt-structure-water interactions. We believe that significant technical advances have been achieved during the course of these studies. It was found that: the solidification has a strong effect on the drop deformation and breakup. Initially appearing at the drop surface and, later, thickening inwards, the solid crust layer dampens the instability waves on the drop surface and, therefore, hinders drop deformation and breakup. The drop thermal properties also affect the thermal behavior of the drop and, therefore, have impact on its deformation behavior. The jet fragmentation process is a function of many related phenomena. The fragmentation rate depends not only on the traditional parameters, e.g. the Weber number, but also on the melt physical properties, which change as the melt cools down from the liquidus to the solidus temperature. Additionally, the crust formed on the surface of the melt jet will also reduce the propensity

  3. Investigation on Melt-Structure-Water Interactions (MSWI) during severe accidents

    International Nuclear Information System (INIS)

    Sehgal, B.R.; Yang, Z.L.; Dinh, T.N.; Nourgaliev, R.R.; Bui, V.A.; Haraldsson, H.O.; Li, H.X.; Konovakhin, M.; Paladino, D.; Leung, W.H

    1999-08-01

    This report is the final report for the work performed in 1998 in the research project Melt Structure Water Interactions (MSWI), under the auspices of the APRI Project, jointly funded by SKI, HSK, USNRC and the Swedish and Finnish power companies. The present report describes results of advanced analytical and experimental studies concerning melt-water-structure interactions during the course of a hypothetical severe core meltdown accident in a light water reactor (LWR). Emphasis has been placed on phenomena and properties which govern the fragmentation and breakup of melt jets and droplets, melt spreading and coolability, and thermal and mechanical loadings of a pressure vessel during melt-vessel interaction. Many of the investigations performed in support of this project have produced papers which have been published in the proceedings of technical meetings. A short summary of the results achieved in these papers is provided in this overview. Both experimental and analytical studies were performed to improve knowledge about phenomena of melt-structure-water interactions. We believe that significant technical advances have been achieved during the course of these studies. It was found that: the solidification has a strong effect on the drop deformation and breakup. Initially appearing at the drop surface and, later, thickening inwards, the solid crust layer dampens the instability waves on the drop surface and, therefore, hinders drop deformation and breakup. The drop thermal properties also affect the thermal behavior of the drop and, therefore, have impact on its deformation behavior. The jet fragmentation process is a function of many related phenomena. The fragmentation rate depends not only on the traditional parameters, e.g. the Weber number, but also on the melt physical properties, which change as the melt cools down from the liquidus to the solidus temperature. Additionally, the crust formed on the surface of the melt jet will also reduce the propensity

  4. Funding opportunities for clinical investigators in the early stages of career development in cardiovascular research.

    Science.gov (United States)

    Mentz, Robert J; Becker, Richard C

    2013-11-01

    Contemporary cardiovascular research offers junior investigators the opportunity to explore the gamut of biomedical questions. Despite the recent reduction in the availability of funding mechanisms that have historically served as the primary pathways for investigators in the early stages of career development, there remain numerous traditional and non-traditional funding opportunities. This article highlights these opportunities in order to assist early career investigators in the development of a personalized research trajectory, which optimizes the potential for career success.

  5. Structural investigation of a new antimicrobial thiazolidine compound

    Energy Technology Data Exchange (ETDEWEB)

    Cozar, I. B.; Pîrnău, A. [National Institute for Research and Development of Isotopic and Molecular Technologies, 65-103 Donath Street, RO-400293 Cluj-Napoca (Romania); Vedeanu, N.; Nastasă, C. [Iuliu Hatieganu University of Medicine and Pharmacy, Faculty of Pharmacy, RO-400023 Cluj-Napoca (Romania)

    2013-11-13

    Thiazoles and their derivatives have attracted the interest over the last decades because of their varied biological activities: antibacterial, antiviral, antifungal, inflammation or in the treatment of allergies. A new synthesized compound 3-[2-(4-Methyl-2-phenyl-thiazol-5-yl)-2-oxo-ethyl]-thazolidine-2,4-dione was investigated by FT-IR, FT-Raman, {sup 1}H, {sup 13}C NMR spectroscopies and also by DFT calculations at B3LYP/6-31G(d) level of theory. The very good correlation found between the experimental and theoretical data shows that the optimized molecular structure is very close to reality. Also the NMR spectra show a monomeric behaviour of this compound in solutions.

  6. Knowledge sharing through social media: Investigating trends and technologies in a global marketing and advertising research company

    Directory of Open Access Journals (Sweden)

    Dina Adamovic

    2012-02-01

    Full Text Available Background: The purpose of this study was to investigate social media technology trends in Nielsen – a global information and measurement company – and to establish how these technologies can help the company to create a knowledge-sharing culture.Objective: The objective of this study was to investigate trends in knowledge-sharing technologies in Nielsen.Method: The researchers distributed semi-structured questionnaires to a sample of employees in Nielsen’s Television Audience Measurement Department. They also conducted interviews with specific employees in this department to gain a better understanding of employees’ attitudes toward, and perceptions of, the use of social media tools for creating a knowledgesharing culture at Nielsen. The researchers validated the data to see whether it could support the research and used triangulation to create a holistic view of the data they received from the questionnaires.Results: The findings of the study revealed that respondents had a positive attitude to sharing knowledge with one another through using social media tools. However, some respondents thought that technology, in general, was ‘the tree of good and evil’. The survey findings showed that Nielsen did have social media tools. However, not all employees were aware of these tools or were willing to use the tools to share knowledge. This study highlighted the possible advantages of the social media for sharing knowledge and how Nielsen could use the tools more widely.Conclusion: In order for a knowledge sharing culture to thrive at Nielsen, its employees need to engage more with social media tools in their business practices. 

  7. Investigation of the hyperfine structure of Praseodymium-transitions using laser spectroscopy

    International Nuclear Information System (INIS)

    Shamim Khan

    2011-01-01

    A comprehensive knowledge of the electron levels in an atom is one of the prerequisite for understanding the electron-electron and electron-nucleus interactions inside an atom and for the classification of the atomic spectrum of an element. The spin-orbit interaction is the largest relativistic effect and is responsible for the fine structure splitting in an atom. The hyperfine structure splitting of the fine structure atomic energy levels arise as a result of the interaction between spinning and orbiting electrons and electromagnetic multipole nuclear moments. The electronic ground state configuration of praseodymium 59 Pr 141 is [Xe] 4f 3 6s 2 , with ground state level 4 I 9/2 . Because of its 5 outer electrons Praseodymium has a high density of energy levels which give rise to an extremely line rich emission spectrum. Due to this fact praseodymium serves as an efficient testing ground for hyperfine structure studies. The thesis is mainly devoted to the finding of previously unknown energy levels by the investigation of spectral lines and their hyperfine structures. In a hollow cathode discharge lamp praseodymium atoms and ions in ground and excited states are excited to high lying states by laser light. The excitation source is a tunable ring-dye laser system, operated with Stilbene 3, Rhodamine 6G, Kiton Red, DCM and LD 700. A high resolution Fourier Transform spectrum is used for extracting excitation wavelengths. Then the laser wavelength is tuned to a strong hyperfine component of the spectral line to be investigated, and a search for fluorescence from excited levels is performed. From the observed hyperfine structure pattern, J-values and hyperfine interaction constants A of the combining levels are determined. This information, together with excitation and fluorescence wavelengths, allows us to find the energies of the involved levels. During the course of this dissertation 313 new energy levels of Pr I and 4 new energy levels of Pr II were discovered

  8. Investigation of nanoscale structures by small-angle X-ray scattering in a radiochromic dosimeter

    DEFF Research Database (Denmark)

    Skyt, Peter Sandegaard; Jensen, Grethe Vestergaard; Wahlstedt, Isak Hannes

    2014-01-01

    This study examines the nanoscale structures in a radiochromic dosimeter that was based on leuco-malachite-green dye and the surfactant sodium dodecyl sulfate (SDS) suspended in a gelatin matrix. Small-angle X-ray scattering was used to investigate the structures of a range of compositions...

  9. Research and Teaching: An Investigation of the Evolution of High School and Undergraduate Student Researchers' Understanding of Key Science Ethics Concepts

    Science.gov (United States)

    Mabrouk, Patricia Ann

    2013-01-01

    High school and undergraduate research students were surveyed over the 10-week period of their summer research programs to investigate their understanding of key concepts in science ethics and whether their understanding changed over the course of their summer research experiences. Most of the students appeared to understand the issues relevant to…

  10. Investigating Design Research Landscapes through Exhibition

    DEFF Research Database (Denmark)

    Jönsson, Li; Hansen, Flemming Tvede; Mäkelä, Maarit

    2013-01-01

    What characterizes a design research exhibition compared to a traditional design and art exhibition? How do you show the very materialities of the design experiments as a means for communicating knowledge of research and of practice? How do you present, review and utilize such an exhibition......? With those questions in mind, the intention and challenge for the Nordes 2013 Design Research Exhibition was to expand on current notions of staging research enquires in design research conference contexts. Artefacts, installations, performances, and other materialities that relate to the theme...... of the conference - Experiments in Design Research – were displayed as tools to express and communicate different design research enquires. Through this paper we will describe the Nordes exhibition as a specific case that renders questions visible in relation to how to utilize a design research exhibition...

  11. A study on organizational culture, structure and information technology as three KM enablers: A case study in five Iranian medical and healthcare research centers

    Directory of Open Access Journals (Sweden)

    Mahdi Iran-nejad-parizi

    2013-01-01

    Full Text Available This study investigates organizational structure, culture, and information technology as knowledge management (KM infrastructural capabilities, and compares their significance and status quo in five medical research centers in Tehran, Iran. Objectives of this research were pursued by employing two statistical methods, regression analysis and Friedman test. Included in the study were 135 people (researchers and support staff from five medical and healthcare research centers of Tehran. A survey questionnaire including 23 questions was utilized to examine organizational structure, culture and information technology indicators. And another 12 questions examined KM effectiveness. The Friedman test indicated that in terms of their status quo, the three studied KM enablers are at different conditions, with organizational culture having the best (mean rank=1.79 and IT the worst (mean rank=2.14 status. Moreover, it was revealed by regression analysis that organizational structure is believed to have the most significant impact (Beta= 0.397 on the effectiveness of knowledge management initiatives, while information technology gained the least perceived impact (Beta= 0.176.

  12. An Investigation of Energy Transmission Due to Flexural Wave Propagation in Lightweight, Built-Up Structures. Thesis

    Science.gov (United States)

    Mickol, John Douglas; Bernhard, R. J.

    1986-01-01

    A technique to measure flexural structure-borne noise intensity is investigated. Two accelerometers serve as transducers in this cross-spectral technique. The structure-borne sound power is obtained by two different techniques and compared. In the first method, a contour integral of intensity is performed from the values provided by the two-accelerometer intensity technique. In the second method, input power is calculated directly from the output of force and acceleration transducers. A plate and two beams were the subjects of the sound power comparisons. Excitation for the structures was either band-limited white noise or a deterministic signal similar to a swept sine. The two-accelerometer method was found to be sharply limited by near field and transducer spacing limitations. In addition, for the lightweight structures investigated, it was found that the probe inertia can have a significant influence on the power input to the structure. In addition to the experimental investigation of structure-borne sound energy, an extensive study of the point harmonically forced, point-damped beam boundary value problem was performed to gain insight into measurements of this nature. The intensity formulations were also incorporated into the finite element method. Intensity mappings were obtained analytically via finite element modeling of simple structures.

  13. Transmission electron microscopy investigations of the CdSe based quantum structures

    Energy Technology Data Exchange (ETDEWEB)

    Roventa, E.

    2006-09-22

    In this work, the structural morphology of the active region of the ZnSe laser diode: quaternary CdZnSSe quantum well or CdSe quantum dots embedded in CdSe/ZnSSe superlattices is investigated using Transmission Electron Microscopy. The conventional as well as high resolution imaging studies indicated that the degradation of the ZnSe laser diodes is connected with the formation of extended defects in the optical active region leading to a local strain relaxation of the quantum well. Furthermore the outdiffusion of Cd from the quantum well occurs predominantly where the defects are located. The chemical composition and ordering phenomena in CdSe/ZnSSe supperlattices were also investigated, employing a series of five-fold structures with different spacer layer thickness and a ten-fold structure. The composition in the CdSe/ZnSSe superlattice was determined to a certain extent using different techniques. Generally, the encountered difficulties regarding the accuracy of the obtained values are correlated with the complexity of the investigated system and with the available experimental methods used. Regarding the alignment of the dots, experimental results support a strain driven ordering process, in which the strain fields from buried dots lead to heterogeneous nucleation conditions for the dots in the subsequently deposited layers. An increased ordering with subsequent stacking of the dot layers is was also found. An anisotropy of the lateral alignment of the CdSe dots was also observed in two different left angle 110 right angle zone axes. The similar plan-view images shows that the preferential alignment of the dots does not follow low-index crystallographic directions. However, it is assumed that this is attributed to the anisotropic elastic strain distribution combined with surface diffusion. (orig.)

  14. Transmission electron microscopy investigations of the CdSe based quantum structures

    International Nuclear Information System (INIS)

    Roventa, E.

    2006-01-01

    In this work, the structural morphology of the active region of the ZnSe laser diode: quaternary CdZnSSe quantum well or CdSe quantum dots embedded in CdSe/ZnSSe superlattices is investigated using Transmission Electron Microscopy. The conventional as well as high resolution imaging studies indicated that the degradation of the ZnSe laser diodes is connected with the formation of extended defects in the optical active region leading to a local strain relaxation of the quantum well. Furthermore the outdiffusion of Cd from the quantum well occurs predominantly where the defects are located. The chemical composition and ordering phenomena in CdSe/ZnSSe supperlattices were also investigated, employing a series of five-fold structures with different spacer layer thickness and a ten-fold structure. The composition in the CdSe/ZnSSe superlattice was determined to a certain extent using different techniques. Generally, the encountered difficulties regarding the accuracy of the obtained values are correlated with the complexity of the investigated system and with the available experimental methods used. Regarding the alignment of the dots, experimental results support a strain driven ordering process, in which the strain fields from buried dots lead to heterogeneous nucleation conditions for the dots in the subsequently deposited layers. An increased ordering with subsequent stacking of the dot layers is was also found. An anisotropy of the lateral alignment of the CdSe dots was also observed in two different left angle 110 right angle zone axes. The similar plan-view images shows that the preferential alignment of the dots does not follow low-index crystallographic directions. However, it is assumed that this is attributed to the anisotropic elastic strain distribution combined with surface diffusion. (orig.)

  15. Promising and Established Investigators' Experiences Participating in the National Athletic Trainers' Association Foundation Research Mentor Program.

    Science.gov (United States)

    Nottingham, Sara L; Mazerolle, Stephanie M; Barrett, Jessica L

    2017-04-01

      Mentorship is a helpful resource for individuals who transition from doctoral student to tenure-track faculty member. The National Athletic Trainers' Association (NATA) Research & Education Foundation offers a Research Mentor Program to provide mentorship to promising investigators, particularly as they work to establish independent lines of research.   To gain the perspectives of promising and established investigators on their participation in the NATA Foundation Research Mentor Program.   Qualitative, phenomenological research.   Higher education institutions.   Seven promising investigators (5 women, 2 men) and 7 established investigators (2 women, 5 men), all of whom had completed the NATA Foundation Research Mentor Program. Data Collection and Analysis We developed and piloted intervi: ew guides designed to gain participants' perspectives on their experiences participating in the NATA Foundation Research Mentor Program. Semistructured telephone interviews were completed with each individual and transcribed verbatim. Data were analyzed using a phenomenological approach, and saturation was obtained. Trustworthiness was established with the use of member checking, multiple-analyst triangulation, and data-source triangulation.   Three themes emerged from the interviews: (1) motivation, (2) collaboration, and (3) resources. Participants were motivated to become involved because they saw the value of mentorship, and mentees desired guidance in their research. Participants believed that collaboration on a project contributed to a positive relationship, and they also desired additional program and professional resources to support novice faculty.   Promising and established investigators should be encouraged to engage in mentoring relationships to facilitate mentees' research agendas and professional development. The NATA Foundation and athletic training profession may consider providing additional resources for novice faculty, such as training on

  16. The USANS technique for the investigation of structure from hydrated gels to porous rock

    International Nuclear Information System (INIS)

    Crompton, Kylie; Forsythe, John; Bertram, Willem; Knott, R.B.; Barker, John

    2005-01-01

    Full text: The Ultra Small Angle Neutron Scattering (USANS) technique extends the range of the Small Angle Neutron Scattering (SANS) technique into the tens of micron size range. This is extremely useful for many systems particularly those where sample preparation for optical or electron microscopy can cause major changes to the microstructure under investigation. Two examples will be presented to highlight different aspects of the technique. Firstly, the structure was investigated of a full hydrated polymer scaffold for stem cells constructed from chitosan. Stem cells interact with the scaffold on the micron scale however information on the nanoscale (i e individual chitosan polymer chains) is also required in order the tailor the scaffold structure. The soft, hydrated gel is unsuitable for optical or electron microscopy. Secondly, the structure was investigated of natural oil-bearing and synthetic rock. The scattering data from different thickness of rock was analysed using a Fourier Transform method to remove multiple scattering effects and to simulate scattering from a thin rock. In this case bulk properties such as porosity are of interest. (authors)

  17. Structural investigations of sodium caseinate micelles in complex environments

    International Nuclear Information System (INIS)

    Huck Iriart, C.; Herrera, M.L.; Candal, R.; Oliveira, C.L.P.; Torriani, I.

    2012-01-01

    Full text: The most frequent destabilization mechanisms in Sodium Caseinate (NaCas) emulsions are creaming and flocculation. Coarse or fine emulsions with low protein con- tent destabilize mainly by creaming. If migration mechanism is suppressed, flocculation may become the main mechanism of destabilization. Small Angle X-Ray Scattering (SAXS) technique was applied to investigate sodium caseinate micelles structure in different environments. As many natural products, Sodium Caseinate samples have large polydisperse size distribution. The experimental data was analyzed using advanced modeling approaches. The Form Factor for the Caseinate micelle subunits was described by an ellipsoidal core shell model and the structure factor was split into two contributions, one corresponding to the particle-particle interactions and another one for the long range correlation of the subunits in the supramolecular structure. For the first term the hard sphere structure factor using the Percus-Yevick approximation for closure relation was used and for the second term a fractal model was applied. Three concentrations of sodium Caseinate (2, 5 and 7.5 %wt.) were measured in pure water, sugar solutions (20 %wt.) and in three different lipid phase emulsions containing 10 %wt. sunflower seed, olive and fish oils. Data analysis provided an average casein subunit radius of 4 nm, an average distance between the subunits of around 20nm and a fractal dimension value of around 3 for all samples. As indicated by the values of the correlation lengths for the set of studied samples, the casein aggregation is strongly affected by simple sugar additions and it is enhanced by emulsion droplets hydrophobic interaction. As will be presented, these nanoscale structural results provided by scattering experiments is consistent with macroscopic results obtained from several techniques, providing a new understanding of NaCas emulsions. (author)

  18. Structural investigations of sodium caseinate micelles in complex environments

    Energy Technology Data Exchange (ETDEWEB)

    Huck Iriart, C.; Herrera, M.L.; Candal, R. [Universidad de Buenos Aires, Buenos Aires (Argentina); Oliveira, C.L.P. [Universidade de Sao Paulo (USP), Sao Paulo, SP (Brazil); Torriani, I. [Laboratorio Nacional de Luz Sincrotron (LNLS), Campinas, SP (Brazil)

    2012-07-01

    Full text: The most frequent destabilization mechanisms in Sodium Caseinate (NaCas) emulsions are creaming and flocculation. Coarse or fine emulsions with low protein con- tent destabilize mainly by creaming. If migration mechanism is suppressed, flocculation may become the main mechanism of destabilization. Small Angle X-Ray Scattering (SAXS) technique was applied to investigate sodium caseinate micelles structure in different environments. As many natural products, Sodium Caseinate samples have large polydisperse size distribution. The experimental data was analyzed using advanced modeling approaches. The Form Factor for the Caseinate micelle subunits was described by an ellipsoidal core shell model and the structure factor was split into two contributions, one corresponding to the particle-particle interactions and another one for the long range correlation of the subunits in the supramolecular structure. For the first term the hard sphere structure factor using the Percus-Yevick approximation for closure relation was used and for the second term a fractal model was applied. Three concentrations of sodium Caseinate (2, 5 and 7.5 %wt.) were measured in pure water, sugar solutions (20 %wt.) and in three different lipid phase emulsions containing 10 %wt. sunflower seed, olive and fish oils. Data analysis provided an average casein subunit radius of 4 nm, an average distance between the subunits of around 20nm and a fractal dimension value of around 3 for all samples. As indicated by the values of the correlation lengths for the set of studied samples, the casein aggregation is strongly affected by simple sugar additions and it is enhanced by emulsion droplets hydrophobic interaction. As will be presented, these nanoscale structural results provided by scattering experiments is consistent with macroscopic results obtained from several techniques, providing a new understanding of NaCas emulsions. (author)

  19. Investigation of efficient termination structure for improved breakdown properties of semiconductor radiation detectors

    International Nuclear Information System (INIS)

    Krizaj, D.; Resnik, D.; Vrtacnik, D.; Amon, S.

    1998-01-01

    Efficiency of a new junction termination structure for improvement of breakdown properties of semiconductor radiation detectors is investigated. The structure consists of a diffused resistor winding around the active junction in a spiral fashion. The current flow through the spiral enables controlled potential distribution along the spiral turns and thus controlled depletion spreading from the main junction, efficiently preventing premature avalanche breakdown. Both multiple guard-ring structures and spiral junction termination structures have shown good breakdown properties typically three to five times higher than breakdown voltages of diodes without junction termination. The breakdown voltages of spiral junction termination structures are only weakly influenced by changes in substrate doping concentration caused by neutron irradiation. They can thus be considered for termination of future semiconductor radiation detectors

  20. Faculty Research Productivity and Organizational Structure in Schools of Nursing.

    Science.gov (United States)

    Kohlenberg, Eileen Mieras

    1992-01-01

    A sample of 128 of 221 nursing faculty completed a scholarly productivity index and organizational inventory, which did not yield significant relationships between productivity and organizational structure. Productivity and prepublication research activities varied positively with procedural specifications in a highly bureaucratic organizational…

  1. Containment structure tendon investigation

    International Nuclear Information System (INIS)

    Fulton, J.F.; Murray, K.H.

    1983-01-01

    The paper describes an investigation into the possible causes of lower-than-predicted tendon forces which were measured during past tendon surveillances for a concrete containment. The containment is post tensioned by vertical tendons which are anchored into a rock foundation. The tendons were originally stressed in 1969, and lift-off tests were performed on six occasions subsequent to this date over a period of 11 years. The tendon forces measured in these tests were generally lower than predicted, and by 1979 the prestress level in the containment was only marginally above the design requirement. The tendons were retensioned in 1980, and by this time an investigation into the possible causes was underway. Potential causes investigated include the rock anchors and surrounding rock, elastomeric pad creep, wire stresses, thermal effects, stressing equipment and lift-off procedures, and wire stress relaxation. The investigation activities included stress relaxation testing of wires pulled from actual tendons. The stress relaxation test program included wire specimens at several different temperature and initial stress levels and the effect of a varying temperature history on the stress relaxation property of the wires. For purpose of future force predictions of the retensioned tendons, the test program included tests to determine the effect on stress relaxation due to restressing the wires after they had relaxed for 1000 hours and 10,000 hours. (orig./GL)

  2. An interdisciplinary investigation into the narratives of three co-researchers: A postfoundational notion of practical theology

    Directory of Open Access Journals (Sweden)

    Juanita Meyer

    2015-11-01

    Full Text Available This article elaborates on the sixth movement of a postfoundational notion of practical theology and is concerned with giving a description of experiences, which are thickened through interdisciplinary investigation. The experiences of interest are those of the co-researchers who formed part of the larger research study, conducted in 2010, and who were at the time adolescent male orphans, affected by HIV and AIDS, poverty and father abandonment. The research was conducted within the theoretical frameworks of a postfoundational notion of practical theology, narrative therapy and research, and social constructionism. A qualitative research strategy was employed, with the case study design as point of departure in collecting and analysing research data. Various key aspects were investigated with the use of the model of narrative and the seven movements of a postfoundational notion of practical theology. The aim of this article is to provide an illustration of the application of the principles of a postfoundational notion of practical theology, and its sixth movement – an interdisciplinary investigation – as it is applied within this specific research context. Four interdisciplinary conversationalists, each from a different academic field, were invited to reflect on the three narrated stories of the co-researchers. This article, then, gives a report on their feedback and the value of interdisciplinary investigation in aiding, with the understanding of the meaningmaking process behind collected narratives.

  3. Electronic structure of Mo and W investigated with positron annihilation

    Energy Technology Data Exchange (ETDEWEB)

    Dutschke, Markus [Theoretical Physics III, Center for Electronic Correlations and Magnetism, Institute of Physics, University of Augsburg (Germany); Sekania, Michael [Theoretical Physics III, Center for Electronic Correlations and Magnetism, Institute of Physics, University of Augsburg (Germany); Andronikashvili Institute of Physics, Tbilisi (Georgia); Benea, Diana [Faculty of Physics, Babes-Bolyai University, Cluj-Napoca (Romania); Department of Chemistry, Ludwig Maximilian University of Munich (Germany); Ceeh, Hubert; Weber, Joseph A.; Hugenschmidt, Christoph [FRM II, Technische Universitaet Muenchen, Garching (Germany); Chioncel, Liviu [Theoretical Physics III, Center for Electronic Correlations and Magnetism, Institute of Physics, University of Augsburg (Germany); Augsburg Center for Innovative Technologies, University of Augsburg (Germany)

    2016-07-01

    We perform electronic structure calculations to analyze the momentum distribution of the transition metals molybdenum and tungsten. We study the influence of positron-electron and the electron-electron interactions on the shape of the two-dimensional angular correlation of positron annihilation radiation (2D-ACAR) spectra. Our analysis is performed within the framework of the combined Density Functional (DFT) and Dynamical Mean-Field Theory (DMFT). Computed spectra are compared with recent experimental investigations.

  4. The investigation about embodiment of vertical isolation structure. An embodiment of the structural plan of damper element

    International Nuclear Information System (INIS)

    Somaki, Takahiro; Miyamoto, Akinori; Nakatogawa, Tetsundo

    2003-01-01

    In order to realize the concept of a vertical isolation system (common deck system), research and development on the vertical isolation structure is now underway. In its first step, structure plans of each of the isolation element and the damper element will be drawn up, and in the next step, tests on these elements will be planed, executed, analyzed, and evaluated, to be reflected to the structure plan. In this report, the structure plan and test plan of damper element is reported. At first, it was concluded in the previous work that the steel-materials damper which can be evaluated by Ramberg-Osgood type is applicable to the vertical isolation system required performance. Then, based on this results, the form range of a damper which satisfies was surveyed from both cross section thickness and distribution of strain by analysis. Next, in order to check the performance (limit a damping capability, load carrying capacity, fatigue strength, and deformability) of an actual damper element based on this analysis result, the test plan for actual scale model was drawn up. (author)

  5. Investigating Coherent Structures in the Standard Turbulence Models using Proper Orthogonal Decomposition

    International Nuclear Information System (INIS)

    Eliassen, Lene; Andersen, Søren

    2016-01-01

    The wind turbine design standards recommend two different methods to generate turbulent wind for design load analysis, the Kaimal spectra combined with an exponential coherence function and the Mann turbulence model. The two turbulence models can give very different estimates of fatigue life, especially for offshore floating wind turbines. In this study the spatial distributions of the two turbulence models are investigated using Proper Orthogonal Decomposition, which is used to characterize large coherent structures. The main focus has been on the structures that contain the most energy, which are the lowest POD modes. The Mann turbulence model generates coherent structures that stretches in the horizontal direction for the longitudinal component, while the structures found in the Kaimal model are more random in their shape. These differences in the coherent structures at lower frequencies for the two turbulence models can be the reason for differences in fatigue life estimates for wind turbines. (paper)

  6. Investigation of laboratory test procedures for assessing the structural capacity of geogrid-reinforced aggregate base materials.

    Science.gov (United States)

    2015-04-01

    The objective of this research was to identify a laboratory test method that can be used to quantify improvements in structural capacity of aggregate base materials reinforced with geogrid. For this research, National Cooperative Highway Research Pro...

  7. Structure investigations on Portland cement paste by small angle neutron scattering

    International Nuclear Information System (INIS)

    Dragolici, C.A.; Lin, A.

    2004-01-01

    Hydrated Portland cement is a very complex material. Cement paste consists of many crystalline and non-crystalline phases in various ranges of sizes (μm and nm scale). The crystalline phases are embedded in amorphous phases of hydration products. We investigated the structural changes of hydrating phases in a time interval up to 18 days, at Budapest Neutron Center's SANS spectrometer. The small angle neutron scattering of Portland cements prepared with a various water-to-cement ratios, gave us information about the microstructure changes in the material. Fractals were a suitable way for structure modelling. Some comments regarding the opportunity of using the most common models are pointed out. (authors)

  8. Investigation of fluid-structure interaction with various types of junction coupling

    Science.gov (United States)

    Ahmadi, A.; Keramat, A.

    2010-10-01

    In this study of water hammer with fluid-structure interaction (FSI) the main aim was the investigation of junction coupling effects. Junction coupling effects were studied in various types of discrete points, such as pumps, valves and branches. The emphasis was placed on an unrestrained pump and branch in the system, and the associated relations were derived for modelling them. Proposed relations were considered as boundary conditions for the numerical modelling which was implemented using the finite element method for the structural equations and the method of characteristics for the hydraulic equations. The results can be used by engineers in finding where junction coupling is significant.

  9. Experimental and theoretical investigations of soil-structure interaction effect at HDR-reactor-building

    International Nuclear Information System (INIS)

    Wassermann, K.

    1983-01-01

    Full-scale dynamic testing on intermediate and high levels was performed at the Heissdampfreaktor (HDR) in 1979. Various types of dynamic forces were applied and response of the reactor containment structure and internal components was measured. Precalculations of dynamic behaviour and response of the structure were made through different mathematical models for the structure and the underlying soil. Soil-Structure Interaction effects are investigated and different theoretical models are compared with experimental results. In each model, the soil is represented by springs attached to the structural model. Stiffnesses of springs are calculated by different finite-element idealizations and half-space approximations. Eigenfrequencies and damping values related to interaction effects (translation, rocking, torsion) are identified from test results. The comparisons of dynamic characteristic of the soil-structure system between precalculations and test results show good agreement in general. (orig.)

  10. Investigation of electro-optical properties for electrochemical luminescence device with a new electrode structure

    Science.gov (United States)

    Ok, Jung-Woo; Pooyodying, Pattarapon; Anuntahirunrat, Jirapat; Sung, Youl-Moon

    2018-04-01

    In this paper, we investigate electrochemical luminescent (ECL) device with a new structure and the ECL cell device with proposed electrode configuration works reliably at AC voltage. In particular, the conventional ECL cell has counter electrodes in which a cathode and an anode are opposed to each other, whereas the proposed structure has parallel electrodes in which a cathode and an anode are arranged on a single substrate. The proposed electrode configuration has a structural feature that electric short-circuiting is less likely to occur during bending than the conventional electrode configuration. The electro-optical characteristics of the new electrode configuration such as the current density, the light emission intensity, and the time evolution of the emission are investigated. The proposed ECL device exhibited higher light emitting efficiency than the conventional structure. Especially, at AC operation mode, the new structure showed the distinctive luminescence characteristic which is combined the first luminescence near the surface of electrode with the delayed second luminescence near the center of between electrodes. It was closely related to the behavior of luminescent particles. The proposed the ECL cell structure is expected to be utilized as a flexible display device by taking advantage of its characteristics and practicality.

  11. Research investigation report on Fukushima Daiichi nuclear accident

    International Nuclear Information System (INIS)

    2012-03-01

    This report was issued in February 2012 by Rebuild Japan Initiative Foundation's Independent Investigation Commission on the Fukushima Daiichi Nuclear Accident, which consisted of six members from the private sector in independent positions and with no direct interest in the business of promoting nuclear power. Commission aimed to determine the truth behind the accident by clarifying the various problems and reveal systematic problems behind these issues so as to create a new starting point by identifying clear lessons learned. Report composed of four chapters; (1) progression of Fukushima accident and resulting damage (accident management after Fukushima accident, and effects and countermeasure of radioactive materials discharged into the environment), (2) response against Fukushima accident (emergency response of cabinet office against nuclear disaster, risk communication and on-site response against nuclear disaster), (3) analysis of historical and structural factors (technical philosophy of nuclear safety, problems of nuclear safety regulation of Fukushima accident, safety regulatory governance and social background of 'Safety Myth'), (4) Global Context (implication in nuclear security, Japan in nuclear safety regime, U.S.-Japan relations for response against Fukushima accident, lessons learned from Fukushima accident - aiming at creation of resilience). Report could identify causes of Fukushima accident and factors related to resulting damages, show the realities behind failure to prevent the spread of damage, and analyze the overall structural and historical background behind the accidents. (T. Tanaka)

  12. STRUCTURAL BIOLOGY AND MOLECULAR MEDICINE RESEARCH PROGRAM (LSBMM)

    International Nuclear Information System (INIS)

    Eisenberg, David S.

    2008-01-01

    The UCLA-DOE Institute of Genomics and Proteomics is an organized research unit of the University of California, sponsored by the Department of Energy through the mechanism of a Cooperative Agreement. Today the Institute consists of 10 Principal Investigators and 7 Associate Members, developing and applying technologies to promote the biological and environmental missions of the Department of Energy, and 5 Core Technology Centers to sustain this work. The focus is on understanding genomes, pathways and molecular machines in organisms of interest to DOE, with special emphasis on developing enabling technologies. Since it was founded in 1947, the UCLA-DOE Institute has adapted its mission to the research needs of DOE and its progenitor agencies as these research needs have changed. The Institute started as the AEC Laboratory of Nuclear Medicine, directed by Stafford Warren, who later became the founding Dean of the UCLA School of Medicine. In this sense, the entire UCLA medical center grew out of the precursor of our Institute. In 1963, the mission of the Institute was expanded into environmental studies by Director Ray Lunt. I became the third director in 1993, and in close consultation with David Galas and John Wooley of DOE, shifted the mission of the Institute towards genomics and proteomics. Since 1993, the Principal Investigators and Core Technology Centers are entirely new, and the Institute has separated from its former division concerned with PET imaging. The UCLA-DOE Institute shares the space of Boyer Hall with the Molecular Biology Institute, and assumes responsibility for the operation of the main core facilities. Fig. 1 gives the organizational chart of the Institute. Some of the benefits to the public of research carried out at the UCLA-DOE Institute include the following: The development of publicly accessible, web-based databases, including the Database of Protein Interactions, and the ProLinks database of genomicly inferred protein function linkages

  13. Automatic generation of investigator bibliographies for institutional research networking systems.

    Science.gov (United States)

    Johnson, Stephen B; Bales, Michael E; Dine, Daniel; Bakken, Suzanne; Albert, Paul J; Weng, Chunhua

    2014-10-01

    Publications are a key data source for investigator profiles and research networking systems. We developed ReCiter, an algorithm that automatically extracts bibliographies from PubMed using institutional information about the target investigators. ReCiter executes a broad query against PubMed, groups the results into clusters that appear to constitute distinct author identities and selects the cluster that best matches the target investigator. Using information about investigators from one of our institutions, we compared ReCiter results to queries based on author name and institution and to citations extracted manually from the Scopus database. Five judges created a gold standard using citations of a random sample of 200 investigators. About half of the 10,471 potential investigators had no matching citations in PubMed, and about 45% had fewer than 70 citations. Interrater agreement (Fleiss' kappa) for the gold standard was 0.81. Scopus achieved the best recall (sensitivity) of 0.81, while name-based queries had 0.78 and ReCiter had 0.69. ReCiter attained the best precision (positive predictive value) of 0.93 while Scopus had 0.85 and name-based queries had 0.31. ReCiter accesses the most current citation data, uses limited computational resources and minimizes manual entry by investigators. Generation of bibliographies using named-based queries will not yield high accuracy. Proprietary databases can perform well but requite manual effort. Automated generation with higher recall is possible but requires additional knowledge about investigators. Copyright © 2014 Elsevier Inc. All rights reserved.

  14. Futurepath: The Story of Research and Technology at NASA Lewis Research Center. Structures for Flight Propulsion, ARC Sprayed Monotape, National Aero-Space Plane

    Science.gov (United States)

    1989-01-01

    The story of research and technology at NASA Lewis Research Center's Structures Division is presented. The job and designs of the Structures Division needed for flight propulsion is described including structural mechanics, structural dynamics, fatigue, and fracture. The video briefly explains why properties of metals used in structural mechanics need to be tested. Examples of tests and simulations used in structural dynamics (bodies in motion) are briefly described. Destructive and non-destructive fatigue/fracture analysis is also described. The arc sprayed monotape (a composite material) is explained, as are the programs in which monotape plays a roll. Finally, the National Aero-Space Plane (NASP or x-30) is introduced, including the material development and metal matrix as well as how NASP will reduce costs for NASA.

  15. Investigation of physical structures and interactions at high energy

    International Nuclear Information System (INIS)

    Anderson, E.W.

    1991-01-01

    Contract AC02-85ER40193 supports the investigation of fundamental structures and interactions at high energy by the Iowa State University Alpha HEP Group. Three major activities constitute the present focus of our research. Experiment E-735, performed at the Fermilab Tevatron Collider, is a search for a deconfined quark-gluon plasma phase of hadronic matter predicted to occur when temperatures of 240 MeV are achieved. The primary data were obtained in 1988--1989, from these data the collaboration is analyzing the charged particle multiplicity and transverse momentum distributions of the produced secondaries. These measurements are regarded on theoretical grounds to be sensitive indicators of the formation of a high-temperature plasma. The TPC detector, installed in the PEP ring at SLAC, has accumulated about 60,000 hadronic events at 29 GeV center-of-mass energy. Several thousand events have high-precision vertex chamber measurements. Physics analysis of charmed quark events, in addition to a measurement of the QCD strong coupling, are in progress. Our identification and reconstruction of D o , D*, and D s , charmed mesons will be useful for subsequent B meson studies in the TPC detector. The SSC liquid argon major subsystem tests at BNL and studies of gauge boson identification and reconstruction for large SSC detectors are in progress. Several crucial problems related to calorimeter geometries, coil geometries, and discrimination methods in full SSC events have been solved, and work is in progress on a one million event test of WW scattering capability up to 2 TeV. Our participation in the subsystem proposal involves construction of the module, data-taking at the AGS, and data analysis

  16. Numerical Investigation of the Flow Structure in a Kaplan Draft Tube at Part Load

    Science.gov (United States)

    Maddahian, R.; Cervantes, M. J.; Sotoudeh, N.

    2016-11-01

    This research presents numerical simulation of the unsteady flow field inside the draft tube of a Kaplan turbine at part load condition. Due to curvature of streamlines, the ordinary two-equations turbulence models fail to predict the flow features. Therefore, a modification of the Shear Stress Transport (SST-SAS) model is utilized to approximate the turbulent stresses. A guide vane, complete runner and draft tube are considered to insure the real boundary conditions at the draft tube inlet. The outlet boundary is assumed to discharge into the atmosphere. The obtained pressure fluctuations inside the draft tube are in good agreement with available experimental data. In order to further investigate the RVR formation and its movement, the λ2 criterion, relating the position of the vortex core and strength to the second largest Eigen value of the velocity gradient tensor, is employed. The method used for vortex identification shows the flow structure and vortex motion inside the draft tube accurately.

  17. Research on structure and electrical parameters of indium antimonide films

    International Nuclear Information System (INIS)

    Mukhametniyazova, A.; Konyaeva, V.F.; Sukhanov, S.; Ashirov, A.; Aleksanyan, S.N.

    1980-01-01

    Results of investigations into the effect of conditions of formation of indium antimonide films prepared by thermal vacuum spraying on their structure, phase composition and electric parameters, are presented. The method of studying the synthesized semiconductor layers on the DRON-0.5 X-ray device with CoKsub(α)-radiation is tested. The dependence of structure, phase composition and electric properties of InSb layers 1+3 μm thick sprayed on ferrite substrates on condensation temperature, is established. Hexagonal InSb modification is found

  18. Research on structure and electrical parameters of indium antimonide films

    Energy Technology Data Exchange (ETDEWEB)

    Mukhametniyazova, A; Konyaeva, V F; Sukhanov, S; Ashirov, A; Aleksanyan, S N [AN Turkmenskoj SSR, Ashkhabad. Fiziko-Tekhnicheskii Inst.

    1980-01-01

    Results of investigations into the effect of conditions of formation of indium antimonide films prepared by thermal vacuum spraying on their structure, phase composition and electric parameters, are presented. The method of studying the synthesized semiconductor layers on the DRON-0.5 X-ray device with CoKsub(..cap alpha..)-radiation is tested. The dependence of structure, phase composition and electric properties of InSb layers 1+3 ..mu..m thick sprayed on ferrite substrates on condensation temperature, is established. Hexagonal InSb modification is found.

  19. Nuclear structure research. Progress report, August 1, 1993--July 31, 1994

    International Nuclear Information System (INIS)

    Brenner, D.S.

    1994-08-01

    The Clark University research program in nuclear structure is a collaborative effort involving Clark University personnel, staff members from Brookhaven National Laboratory and an active participation of scientists from the US and other nations. The TRISTAN on-line isotope separator and the capture γ-ray facility at the High Flux Beam Reactor have been the primary experimental foci of the program although experiments have been carried out at other installations such as the High Flux Reactor of the Institute Laue-Langevin in Grenoble and at the Tandem Van de Graaff Accelerator, Yale University. Recently, we have joined colleagues from Argonne National Laboratory, Vanderbilt University and the University of Maryland in experiments using the Fragment Mass Analyzer (FMA) at the ATLAS accelerator. Our program has four principal research themes which underlie the various research initiatives, three involving nuclear structure physics and one directed towards astrophysics. These themes are: (1) the critical role of the proton-neutron interaction in the evolution of nuclear structure and its relation to collectivity, (2) the study of exotic nuclei far-from-stability produced by radioactive ion beams (REBs), (3) the appearance and role of dynamical symmetries in nuclei and the characterization of transitions among these limits, and (4) the characterization and prediction of properties of nuclei far from stability of importance in stellar nucleosynthesis

  20. Nuclear structure research. Annual progress report

    International Nuclear Information System (INIS)

    Wood, J.L.

    1994-01-01

    The most significant development this year has been the outcome of a survey of EO transition strength, ρ 2 (EO), in heavy nuclei. The systematics of ρ 2 (EO) reveals that the strongest EO's are between pairs of excited states with the same spin and parity. This is observed in the regions Z,N = 38,60; 48,66; 64,88; and 80,106. Unlike other multipoles it is rare that nuclear ground states are strongly connected to excited states by monopole transitions. Another significant finding is in the results of the experimental study of levels in 187 Au. Two bands of states are observed with identical spin sequences, very similar excitation energies, and EO transitions between the favored band members but not between the unfavored band members. This is interpreted in terms of nearly identical diabatic structures. Experimental data sets for the radioactive decays of 183 Pt and 186 Au to 183 Ir and 186 Pt, respectively, have been under analysis. The studies are aimed at elucidating shape coexistence and triaxiality in the A = 185 region. An extensive program of systematics for nuclei at and near N = Z has been continued in preparation for the planned nuclear structure research program using the Holifield Radioactive Ion Beam Facility (HRIBF) at Oak Ridge. A considerable effort has been devoted to HRIBF target development

  1. Sustaining the Clinical and Translational Research Workforce: Training and Empowering the Next Generation of Investigators.

    Science.gov (United States)

    Yin, Helen L; Gabrilove, Janice; Jackson, Rebecca; Sweeney, Carol; Fair, Alecia M; Toto, Robert

    2015-07-01

    There is mounting concern that clinician-scientists are a vanishing species and that the pipeline for clinical and translational research (CTR) investigators is in jeopardy. For the majority of current junior CTR investigators, the career path involves first obtaining a National Institutes of Health (NIH)-funded K-type career development award, particularly K08 and K23, and subsequently an NIH R01. This transition, popularly referred to as K2R, is a major hurdle with a low success rate and gaps in funding. In this Perspective, the authors identify factors that facilitate K2R transition and important aspects of increasing and sustaining the pipeline of CTR investigators. They also highlight significant differences in success rates of women and those underrepresented in biomedical research. Early career exposure to research methodology, protected time, multidisciplinary mentoring, and institutional "culture shift" are important for fostering and rewarding team science. Mentoring is the single most important contributor to K2R success, and emerging evidence suggests that formal mentor training and team mentoring are effective. Leadership training can empower junior investigators to thrive as independent CTR investigators. Future research should focus on delineating the difference between essential and supplemental factors to achieve this transition, and mentoring methods that foster success, including those that promote K2R transition of women and those underrepresented in biomedical research. The Clinical and Translational Science Awards National Consortium is well positioned to test existing models aimed at shortening the time frame, increasing the rate of K2R transition, and identifying strategies that improve success.

  2. ProSelection: A Novel Algorithm to Select Proper Protein Structure Subsets for in Silico Target Identification and Drug Discovery Research.

    Science.gov (United States)

    Wang, Nanyi; Wang, Lirong; Xie, Xiang-Qun

    2017-11-27

    Molecular docking is widely applied to computer-aided drug design and has become relatively mature in the recent decades. Application of docking in modeling varies from single lead compound optimization to large-scale virtual screening. The performance of molecular docking is highly dependent on the protein structures selected. It is especially challenging for large-scale target prediction research when multiple structures are available for a single target. Therefore, we have established ProSelection, a docking preferred-protein selection algorithm, in order to generate the proper structure subset(s). By the ProSelection algorithm, protein structures of "weak selectors" are filtered out whereas structures of "strong selectors" are kept. Specifically, the structure which has a good statistical performance of distinguishing active ligands from inactive ligands is defined as a strong selector. In this study, 249 protein structures of 14 autophagy-related targets are investigated. Surflex-dock was used as the docking engine to distinguish active and inactive compounds against these protein structures. Both t test and Mann-Whitney U test were used to distinguish the strong from the weak selectors based on the normality of the docking score distribution. The suggested docking score threshold for active ligands (SDA) was generated for each strong selector structure according to the receiver operating characteristic (ROC) curve. The performance of ProSelection was further validated by predicting the potential off-targets of 43 U.S. Federal Drug Administration approved small molecule antineoplastic drugs. Overall, ProSelection will accelerate the computational work in protein structure selection and could be a useful tool for molecular docking, target prediction, and protein-chemical database establishment research.

  3. Raman spectroscopy used for structural investigations of anodically formed ZrO2

    International Nuclear Information System (INIS)

    Koneska, Zagorka; Arsova, Irena

    2003-01-01

    The structure of the oxide formed on Zr(99% + Hf) with anodic oxidation at different potentials in 1 mol/dm 3 H 3 PO 4 and 2 mol/dm 3 KOH solutions were investigated using Raman spectroscopy. Normally the anodic oxides of Zr form only crystals. Under certain circumstances, amorphous anodic ZrO 2 can be observed. Amorphous phase is observed for the anodically formed zirconium oxides in H 3 PO 4 . The oxide formed in KOH at potential of 80 V, where sparks appears on the Zr electrode showed crystalline structure. (Original)

  4. A European collaboration research programme to study and test large scale base isolated structures

    International Nuclear Information System (INIS)

    Renda, V.; Verzeletti, G.; Papa, L.

    1995-01-01

    The improvement of the technology of innovative anti-seismic mechanisms, as those for base isolation and energy dissipation, needs of testing capability for large scale models of structures integrated with these mechanisms. These kind experimental tests are of primary importance for the validation of design rules and the setting up of an advanced earthquake engineering for civil constructions of relevant interest. The Joint Research Centre of the European Commission offers the European Laboratory for Structural Assessment located at Ispra - Italy, as a focal point for an international european collaboration research programme to test large scale models of structure making use of innovative anti-seismic mechanisms. A collaboration contract, opened to other future contributions, has been signed with the national italian working group on seismic isolation (Gruppo di Lavoro sull's Isolamento Sismico GLIS) which includes the national research centre ENEA, the national electricity board ENEL, the industrial research centre ISMES and producer of isolators ALGA. (author). 3 figs

  5. Electrical investigations of hybrid OLED microcavity structures with novel encapsulation methods

    Science.gov (United States)

    Meister, Stefan; Brückner, Robert; Fröb, Hartmut; Leo, Karl

    2016-04-01

    An electrical driven organic solid state laser is a very challenging goal which is so far well beyond reach. As a step towards realization, we monolithically implemented an Organic Light Emitting Diode (OLED) into a dielectric, high quality microcavity (MC) consisting of two Distributed Bragg Reectors (DBR). In order to account for an optimal optical operation, the OLED structure has to be adapted. Furthermore, we aim to excite the device not only electrically but optically as well. Different OLED structures with an emission layer consisting of Alq3:DCM (2 wt%) were investigated. The External Quantum Efficiencies (EQE) of this hybrid structures are in the range of 1-2 %, as expected for this material combination. Including metal layers into a MC is complicated and has a huge impact on the device performance. Using Transfer-Matrix-Algorithm (TMA) simulations, the best positions for the metal electrodes are determined. First, the electroluminescence (EL) of the adjusted OLED structure on top of a DBR is measured under nitrogen atmosphere. The modes showed quality factors of Q = 60. After the deposition of the top DBR, the EL is measured again and the quality factors increased up to Q = 600. Considering the two 25-nm-thick-silver contacts a Q-factor of 600 is very high. The realization of a suitable encapsulation method is important. Two approaches were successfully tested. The first method is based on the substitution of a DBR layer with a layer produced via Atomic Layer Deposition (ALD). The second method uses a 0.15-mm-thick cover glass glued on top of the DBR with a 0.23-μm-thick single-component glue layer. Due to the working encapsulation, it is possible to investigate the sample under ambient conditions.

  6. First principles investigation of nitrogenated holey graphene

    Science.gov (United States)

    Xu, Cui-Yan; Dong, Hai-Kuan; Shi, Li-Bin

    2018-04-01

    The zero band gap problem limits the application of graphene in the field of electronic devices. Opening the band gap of graphene has become a research issue. Nitrogenated holey graphene (NHG) has attracted much attention because of its semiconducting properties. However, the stacking orders and defect properties have not been investigated. In this letter, the structural and stacking properties of NHG are first investigated. We obtain the most stable stacking structure. Then, the band structures for bulk and multilayer NHG are studied. Impact of the strain on the band gaps and bond characteristics is discussed. In addition, we investigate formation mechanism of native defects of carbon vacancy (VC), carbon interstitial (Ci), nitrogen vacancy (VN), and nitrogen interstitial (Ni) in bulk NHG. Formation energies and transition levels of these native defects are assessed.

  7. Fiscal 1999 project for research and development of industrial and scientific technologies. Report on the achievements on research and development of a technology to structure accelerated type living organism functions (Unit zone combination technology and the advancement experimental system structuring technology); 1999 nendo kasokugata seibutsu kino kochiku gijutsu no kenkyu kaihatsu seika hokokusho. Tan'i ryoiki kumiawase gijutsu oyobi shinka jikkenkei system kochiku gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    With an aim at structuring an advancement experimental system that can introduce high-level functions efficiently, research was performed on the unit zone combination technology and the advancement experimental system structuring technology. This paper summarizes the achievements in fiscal 1999. In the research of the unit zone combination technology, analysis was made on the structures and functions of barnase mutants replaced with modules and secondary structure units, in order to investigate how much of plasticity is possessed by the amino acid array constituting natural proteins. In addition, establishment was implemented on the random multi-recombination PCR that can link randomly the DNAs having arbitrary arrangement. Furthermore, the STABLE method was developed successfully to put proteins and DNAs coding thereof into direct correspondence. The research on the optimal advancement experimental system structuring technology using model enzymes placed the importance on the mutation generating technology, or the random peptide library fabricating technology. Research was carried out with an intention of structuring a system to discover quickly an optimal method. (NEDO)

  8. Nuclear solid-state research at the FR2

    International Nuclear Information System (INIS)

    Heger, G.; Weitzel, H.

    1979-12-01

    This volume reports on the scientific investigations carried out by external users of the FR 2 research reactor between mid-1978 and mid-1979. Subjects of investigation were the structure of crystalline materials, problems of hydrogen bonds, electron density distributions and structural phase transitions. Plastic phases and supenion conductors, in particular, were studied at high temperatures. Apart from investigations of magnetic structures of solid, particular emphasis is laid on the critical phenomena during magnetic phase transitions. (GSCH) [de

  9. Coordination of International Risk-Reduction Investigations by the Multilateral Human Research Panel for Exploration

    Science.gov (United States)

    Charles, John B.; Bogomolov, Valery V.

    2015-01-01

    Effective use of the unique capabilities of the International Space Station (ISS) for risk reduction on future deep space missions involves preliminary work in analog environments to identify and evaluate the most promising techniques, interventions and treatments. This entails a consolidated multinational approach to biomedical research both on ISS and in ground analogs. The Multilateral Human Research Panel for Exploration (MHRPE) was chartered by the five ISS partners to recommend the best combination of partner investigations on ISS for risk reduction in the relatively short time available for ISS utilization. MHRPE will also make recommendations to funding agencies for appropriate preparatory analog work. In 2011, NASA's Human Research Program (HRP) and the Institute of Biomedical Problems (IBMP) of the Russian Academy of Science, acting for MHRPE, developed a joint US-Russian biomedical program for the 2015 one-year ISS mission (1YM) of American and Russian crewmembers. This was to evaluate the possibilities for multilateral research on ISS. An overlapping list of 16 HRP, 9 IBMP, 3 Japanese, 3 European and 1 Canadian investigations were selected to address risk-reduction goals in 7 categories: Functional Performance, Behavioral Health, Visual Impairment, Metabolism, Physical Capacity, Microbial and Human Factors. MHRPE intends to build on this bilateral foundation to recommend more fully-integrated multilateral investigations on future ISS missions commencing after the 1YM. MHRPE has also endorsed an on-going program of coordinated research on 6-month, one-year and 6-week missions ISS expeditions that is now under consideration by ISS managers. Preparatory work for these missions will require coordinated and collaborative campaigns especially in the psychological and psychosocial areas using analog isolation facilities in Houston, Köln and Moscow, and possibly elsewhere. The multilateral Human Analogs research working group (HANA) is the focal point of those

  10. A preliminary factor analytic investigation into the firstorder factor structure of the Fifteen Factor Plus (15FQ+ on a sample of Black South African managers

    Directory of Open Access Journals (Sweden)

    Seretse Moyo

    2011-10-01

    Research purpose: The primary objective of this study was to undertake a factor analytic investigation of the first-order factor structure of the 15FQ+. Motivation for the study: The construct validity of the 15FQ+, as a measure of personality, is necessary even though it is insufficient to justify its use in personnel selection. Research design, approach and method: The researchers evaluated the fit of the measurement model, which the structure and scoring key of the 15FQ+ implies, in a quantitative study that used an ex post facto correlation design through structural equation modelling. They conducted a secondary data analysis. They selected a sample of 241 Black South African managers from a large 15FQ+ database. Main findings: The researchers found good measurement model fit. The measurement model parameter estimates were worrying. The magnitude of the estimated model parameters suggests that the items generally do not reflect the latent personality dimensions the designers intended them to with a great degree of precision. The items are reasonably noisy measures of the latent variables they represent. Practical/managerial implications: Organisations should use the 15FQ+ carefully on Black South African managers until further local research evidence becomes available. Contribution/value-add: The study is a catalyst to trigger the necessary additional research we need to establish convincingly the psychometric credentials of the 15FQ+ as a valuable assessment tool in South Africa.

  11. Half a century of progress in research on terrestrial impact structures: A review

    Science.gov (United States)

    McCall, G. J. H.

    2009-02-01

    The author, who investigated the Wolfe Creek, Australia, in 1962 and edited two Benchmark Sets of Readings on Meteorite Craters and possible Astroblemes in 1977 and 1979, reviews the state of knowledge at the present time. The text is concerned with terrestrial impact structures, geological features, without any consideration of extraterrestrial analogues. A handful of definitive publications are drawn on to present the story of terrestrial impact in a single article. The text covers historical aspects (briefly); the effect of target variations; the paucity of human observation of such large-scale events; distinction from volcanic (endogenous) structures; modification by geological processes; the transience of the crater initially formed on the target, and its subsequent modifications; the global geographic distribution of the 174 structures now listed (of which a number are dubious attributions); their distribution in geological time (many ages being known only known to wide limits, maximum or minimum values); their size distribution; calculations of impact frequencies; shock effects; processes on impact; the stages of formation; impact into shallow marine and deep sea targets; impacts on ice (about which little is known); and finally the input of impact into biotic extinctions. In this last lengthy section, the summaries of the conclusions of scientists researching impact on Earth and palaeontologists researching biotic impact are set side by side. It is concluded that, if the recent foraminiferal evidence obtained by Gerta Keller and associates is taken at its face value, the case of impact as a sole agent in extinction is non-existent: biotic extinction is clearly a complex process involving a number of causes, in some cases it was staggered in time, and different sets of organisms responded quite differently and surprisingly, even in the same extinction event. Extraterrestrial impact may have been one of the causes in some cases, but it may have been regional

  12. Investigation of the structure of photosynthetic reaction centers. Progress report, June 1, 1981-April 1, 1982

    International Nuclear Information System (INIS)

    van Willigen, H.

    1982-04-01

    The investigation is concerned with the application of Electron Nuclear Double Resonance (ENDOR) and Electron Nuclear Triple Resonance (TRIPLE) in the study of the photo excited triplet state of photosynthetic resonance methods hyperfine interactions between unpaired electrons and nuclear spins can be measured, giving an insight in the electronic and geometric structure of paramagnetic systems. During this initial phase of the project, research has focused on the following areas. (1) Instrumental aspects associated with the application of ENDOR and TRIPLE on the photo excited triplets randomly oriented in solid solution. (2) Exploration of the conditions required for these studies employing ground state triplet systems. (3) Study of photo excited triplet states of model systems such as naphthylene, zinc and magnesium tetraphenyl-porphyrin in polymethylmethacrylate or polycrystalline benzophenone. Progress made in these areas is discussed

  13. Investigation of structural transformations in the Nb-Ti-Al alloy system

    International Nuclear Information System (INIS)

    Vergasova, L.L.; Volin, Eh.M.; Chizhov, I.N.; Lokshina, A.E.

    1975-01-01

    There are given the results of investigating the effect of thermal treatment conditions upon the structure, the phase composition and the mechanical characteristic of VN7 alloy from Nb-Ti-Al system. VN7 alloy was investigated in cast, forged, pressed and rolled state to study the β-α-conversion processes at slow cooling from high temperature. It was found out that slow cooling lowers considerably the plastic characteristic and the impact ductility without changing practically the tensile strength values. Higher plastic characteristic of VN7 alloy can be obtained through hastening the cooling process of the intermediate products after annealing at 950-1050 0 C

  14. Large-scale seismic test for soil-structure interaction research in Hualien, Taiwan

    International Nuclear Information System (INIS)

    Ueshima, T.; Kokusho, T.; Okamoto, T.

    1995-01-01

    It is important to evaluate dynamic soil-structure interaction more accurately in the aseismic design of important facilities such as nuclear power plants. A large-scale model structure with about 1/4th of commercial nuclear power plants was constructed on the gravelly layers in seismically active Hualien, Taiwan. This international joint project is called 'the Hualien LSST Project', where 'LSST' is short for Large-Scale Seismic Test. In this paper, research tasks and responsibilities, the process of the construction work and research tasks along the time-line, main results obtained up to now, and so on in this Project are described. (J.P.N.)

  15. Review and reflection of research on the knowledge structure of physical education teachers in the past 20 years

    Directory of Open Access Journals (Sweden)

    LU Bochun

    2013-08-01

    Full Text Available From the view of knowledge,methodology and other perspectives of regression and reflection on the knowledge structure of the PE teachers of the status quo in the past 20 years,it is considered that the base of the existing knowledge of research is primarily on the knowledge view of objectivism,the perspective of research is restricted.For many years research category of the knowledge structure of PE teachers was consistently confined to discipline knowledge + educational knowledge + culture knowledge.Research Methodology and methods are mainly confined to Speculative theory research guided by rational debate methodology and questionnaire survey research guided by positivist methodology.Due to the impact of the knowledge view of objectivism,rational debate focuses on the objectivity theory knowledge ought status in knowledge structure of PE teachers.Questionnaire survey research is mainly based on attitude survey research,reflecting the ideal state of knowledge structure of physical education teachers.Suggestion: update knowledge,enrich methodological the guidance,pay more attention to the actual condition of knowledge structure of physical education teachers,reveal physical education teachers in the context of the formation,development,and application patterns of their knowledge structure in sports teaching situation,etc.

  16. Extended X-ray absorption fine structure investigation of nitrogen stabilized expanded austenite

    DEFF Research Database (Denmark)

    Oddershede, Jette; Christiansen, Thomas; Ståhl, Kenny

    2010-01-01

    As-delivered austenitic stainless steel and nitrogen stabilized expanded austenite, both fully nitrided and denitrided (in H2), were investigated with Cr, Fe and Ni extended X-ray absorption fine structure. The data shows pronounced short-range ordering of Cr and N. For the denitrided specimen...

  17. Investigating the Structure of the Pediatric Symptoms Checklist in the Preschool Setting

    Science.gov (United States)

    DiStefano, Christine; Liu, Jin; Burgess, Yin

    2017-01-01

    When using educational/psychological instruments, psychometric investigations should be conducted before adopting to new environments to ensure that an instrument measures the same constructs. Exploratory structural equation modeling and confirmatory factor analysis methods were used to examine the utility of the short form of the Pediatric…

  18. Structure investigations on Portland cement paste by small angle neutron scattering

    International Nuclear Information System (INIS)

    Dragolici, C. A.; Len, A.

    2003-01-01

    Portland cement pastes consist of many crystalline and non-crystalline phases in various ranges of sizes (nm and mm scale). The crystalline phases are embedded in amorphous phases of the hydration products. We investigated the structural changes of hydrating phases in the time interval of 1-30 days at Budapest Neutron Center's SANS diffractometer. The small angle neutron scattering of Portland cements prepared with a water-to-cement ratio from 0,3 to 0,8 gave us information about the microstructure changes in the material. Fractals were a suitable way for structure modelling. The variation of fractals size depending on the preparation-to-measurement time interval and water-to-cement ratio could be observed. (authors)

  19. First principles investigation of structural, vibrational and thermal properties of black and blue phosphorene

    Science.gov (United States)

    Arif Khalil, R. M.; Ahmad, Javed; Rana, Anwar Manzoor; Bukhari, Syed Hamad; Tufiq Jamil, M.; Tehreem, Tuba; Nissar, Umair

    2018-05-01

    In this investigation, structural, dynamical and thermal properties of black and blue phosphorene (P) are presented through the first principles calculations based on the density functional theory (DFT). These DFT calculations depict that due to the approximately same values of ground state energy at zero Kelvin and Helmholtz free energy at room-temperature, it is expected that both structures can coexist at transition temperature. Lattice dynamics of both phases were investigated by using the finite displacement supercell approach. It is noticed on the basis of harmonic approximation thermodynamic calculations that the blue phase is thermodynamically more stable than the black phase above 155 K.

  20. Research program to investigate the fundamental chemistry of technetium

    Energy Technology Data Exchange (ETDEWEB)

    McKeown, David A.; Buechele, Andrew C.; Lukens, Wayne W.; Muller, Isabelle S.; Shuh, David K.; Pegg, Ian L.

    2007-10-12

    The objective of this research is to increase the knowledge of the fundamental technetium chemistry necessary to address challenges to the safe, long-term disposal of high-level nuclear waste posed by this element. The primary issues examined during the course of this project were the behavior of technetium and its surrogate rhenium during waste vitrification and glass corrosion. Since the redox behavior of technetium can play a large role in determining its volatility, one goal of this research was to better understand the behavior of technetium in glass as a function of the redox potential of the glass melt. In addition, the behavior of rhenium was examined, since rhenium is commonly used as a surrogate for technetium in waste vitrification studies. A number of glasses similar to Hanford Low Activity Waste (LAW) glasses were prepared under controlled atmospheres. The redox state of the glass was determined from the Fe(II)/Fe(III) ratio in the cooled glass, and the speciation of technetium and rhenium was determined by x-ray absorption fine structure (XAFS) spectroscopy. The behavior of rhenium and technetium during glass alteration was also examined using the vapor hydration test (VHT).

  1. Guidelines for the Investigation of Mediating Variables in Business Research

    OpenAIRE

    MacKinnon, David P.; Coxe, Stefany; Baraldi, Amanda N.

    2011-01-01

    Business theories often specify the mediating mechanisms by which a predictor variable affects an outcome variable. In the last 30 years, investigations of mediating processes have become more widespread with corresponding developments in statistical methods to conduct these tests. The purpose of this article is to provide guidelines for mediation studies by focusing on decisions made prior to the research study that affect the clarity of conclusions from a mediation study, the statistical mo...

  2. Investigating the Utilization of Research Evidence in the 4-H Youth Development Program

    Directory of Open Access Journals (Sweden)

    Lynette H. Bikos

    2011-06-01

    Full Text Available This study investigated the acquisition, interpretation, and utilization of research evidence in the 4-H Youth Development Program from the frame of Social Cognitive Theory. Utilizing Consensual Qualitative Research, we interviewed twenty 4-H faculty, staff, and volunteers from seven states. Results indicated four domains, which covered participants’ definitions of research utilization, their experiences utilizing research, the process of acquiring and distributing research, and barriers and facilitators to research utilization. Participants described research use primarily in terms of improving 4-H programs. They discussed their level of confidence (i.e. self-efficacy in finding and applying research evidence and their beliefs about the outcomes of research utilization (i.e. outcomes expectancy. Participants mentioned such barriers as not knowing where to look for research, lack of time, lack of funding, and difficulty applying research findings to their work. The facilitators included support from other 4-H colleagues and availability of 4-H specific conferences, publications, and curriculum databases.

  3. Investigation of the field dependent spin structure of exchange coupled magnetic heterostructures

    International Nuclear Information System (INIS)

    Gurieva, Tatiana

    2016-05-01

    This thesis describes the investigation of the field dependent magnetic spin structure of an antiferromagnetically (AF) coupled Fe/Cr heterostructure sandwiched between a hardmagnetic FePt buffer layer and a softmagnetic Fe top layer. The depth-resolved experimental studies of this system were performed via Magneto-optical Kerr effect (MOKE), Vibrating Sample Magnetometry (VSM) and various measuring methods based on nuclear resonant scattering (NRS) technique. Nucleation and evolution of the magnetic spiral structure in the AF coupled Fe/Cr multilayer structure in an azimuthally rotating external magnetic field were observed using NRS. During the experiment a number of time-dependent magnetic side effects (magnetic after-effect, domain-wall creep effect) caused by the non-ideal structure of a real sample were observed and later explained. Creation of the magnetic spiral structure in rotating external magnetic field was simulated using a one-dimensional micromagnetic model.The cross-sectional magnetic X-ray diffraction technique was conceived and is theoretically described in the present work. This method allows to determine the magnetization state of an individual layer in the magnetic heterostructure. It is also applicable in studies of the magnetic structure of tiny samples where conventional x-ray reflectometry fails.

  4. Using discrepant events in science demonstrations to promote student engagement in scientific investigations: An action research study

    Science.gov (United States)

    Mancuso, Vincent J.

    one case, though, the investigation was preceded by a discrepant event demonstration using POE, in another case the investigation was preceded by an NOE discrepant event demonstration, and in the third case the student investigation was preceded by an interactive lecture (Lecture/Inquiry, or LA) instead of a demonstration. The intervention took place in Fall 2009 in three sections of the same middle school science course I taught. Data from these experiences were collected and analyzed to evaluate the impact of each unit on (a) students' interest in learning more about the scientific phenomenon under study; and (b) how students designed, conducted and interpreted their own investigation to explain the event. These findings were further compared across experiences to identify similarities and differences connected with the three design approaches utilized --- i.e., inquiry following a discrepant event demonstration using POE, an NOE discrepant event demonstration, or an interactive lecture. Data sources included: audiotapes of each lesson, students' written work, teacher's written reflections, observer's field notes, audiotapes of a final class reflection and semi-structured student interviews. Qualitative analysis was employed to analyze the data with the goal of revealing emerging themes addressing each research question. Findings from this study show that discrepant event demonstrations can indeed generate student interest and inform worthwhile student-led science investigations without requiring great time commitment. Furthermore, each lesson design used (POE, NOE, L/I) offered distinct benefits in the classroom, influencing student engagement and learning outcomes in valuable and distinct ways. This, in turn, suggests that science teachers should choose specific design elements when planning to use demonstrations to achieve specific objectives.

  5. Micro-structural investigations of spray hydrolyzed TiO{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Lakhotiya, H. [Solid State Physics Division, Bhabha Atomic Research Centre, Mumbai-400085 (India); Centre for Converging Technologies, University of Rajasthan, Jaipur (India); Singh, Ripandeep; Bahadur, J. [Solid State Physics Division, Bhabha Atomic Research Centre, Mumbai-400085 (India); Sen, D., E-mail: debasis@barc.gov.in [Solid State Physics Division, Bhabha Atomic Research Centre, Mumbai-400085 (India); Das, Avik; Mazumder, S. [Solid State Physics Division, Bhabha Atomic Research Centre, Mumbai-400085 (India); Paul, B. [Materials Processing Division, Bhabha Atomic Research Centre, Mumbai-400085 (India); Sastry, P.U. [Solid State Physics Division, Bhabha Atomic Research Centre, Mumbai-400085 (India); Lemmel, H. [Atominstitut, Vienna University of Technology, 1020 Vienna (Austria); Institut Laue-Langevin, 38000 Grenoble (France)

    2014-01-25

    Highlights: • Titania microstructure formation by spray hydrolysis. • Morphological transition during spray hydrolysis process. • Hollow microspheres and fractal like grains depending on precursor concentration. • Use of scattering and microscopy techniques in probing mesoscopic structures. • A plausible mechanism regarding the morphological transition is also introduced. -- Abstract: Hydrolysis across tiny spray droplet allows a facile one step synthesis of interesting sub-micrometric structures owing to the large available surface area unlike bulk hydrolysis. In the present work, it has been demonstrated that titania precursor concentration plays a significant role in effecting morphological transformation during spray hydrolysis. While hollow microspheres are formed primarily at low precursor concentration, fractal like grains, having two levels of hierarchy, result at high precursor concentration. Mesoscopic structure of these spray hydrolyzed grains has been investigated by ultra small-angle neutron scattering, small-angle X-ray scattering and scanning electron microscopy. Thermal evolution of initial amorphous phase of titania into crystalline rutile phase, through intermediate anatase and brookite phases, is followed by high temperature X-ray diffraction. A plausible mechanism has been elucidated for the observed morphological transition with variation of precursor concentration.

  6. Investigation of Micro Square Structure Fabrication by Applying Textured Cutting Tool in WEDM

    Directory of Open Access Journals (Sweden)

    Jianguo Zhang

    2015-09-01

    Full Text Available This paper studies micro structure fabrication by means of a textured tool cutting edge, which is manufactured by applying the wire cut electrical discharge machining (WEDM. Machining performance of the square structure fabrication on the tool cutting edge is investigated in the WEDM process, and the machining accuracy is explored in experimental analyses. In this proposed method, undesired overcut comes from the discharge between the processing debris and the side wall of the target structure. Furthermore, by applying the textured cutting tool, the target square structure is directly fabricated on the alumina workpiece with just a simple turning process, which verifies the feasibility of the proposed tool cutting edge textured method by applying the WEDM. This technology is expected to become a potential method for the mass production of micro structure surfaces in the future.

  7. GeneLab: Multi-Omics Investigation of Rodent Research-1 Bio-Banked Tissues

    Science.gov (United States)

    Lai, San-Huei; Boyko, Valery; Chakravarty, Kaushik; Chen, Rick; Dueck, Sandra; Berrios, Daniel C.; Fogle, Homer; Marcu, Oana; Timucin, Linda; Reinsch, Sigrid; hide

    2016-01-01

    NASAs Rodent Research (RR) project is playing a critical role in advancing biomedical research on the physiological effects of space environments. Due to the limited resources for conducting biological experiments aboard the International Space Station (ISS), it is imperative to use crew time efficiently while maximizing high-quality science return. NASAs GeneLab project has as its primary objectives to 1) further increase the value of these experiments using a multi-omics, systems biology-based approach, and 2) disseminate these data without restrictions to the scientific community. The current investigation assessed viability of RNA, DNA, and protein extracted from archived RR-1 tissue samples for epigenomic, transcriptomic, and proteomic assays. During the first RR spaceflight experiment, a variety of tissue types were harvested from subjects, snap-frozen or RNAlater-preserved, and then stored at least a year at -80OC after return to Earth. They were then prioritized for this investigation based on likelihood of significant scientific value for spaceflight research. All tissues were made available to GeneLab through the bio-specimen sharing program managed by the Ames Life Science Data Archive and included mouse adrenal glands, quadriceps, gastrocnemius, tibialis anterior, extensor digitorum longus, soleus, eye, and kidney. We report here protocols for and results of these tissue extractions, and thus, the feasibility and value of these kinds of omics analyses. In addition to providing additional opportunities for investigation of spaceflight effects on the mouse transcriptome and proteome in new kinds of tissues, our results may also be of value to program managers for the prioritization of ISS crew time for rodent research activities. Support from the NASA Space Life and Physical Sciences Division and the International Space Station Program is gratefully acknowledged.

  8. Investigation of three-dimensional turbulent structures in the torsatron TJ-K

    International Nuclear Information System (INIS)

    Mahdizadeh, N.

    2007-01-01

    In this work, for the first time, the three-dimensional nature of drift waves has been verified experimentally inside the confinement region of the toroidal plasma in TJ-K. The perpendicular dynamics of turbulence has been studied with the focus on the poloidal wavenumber spectra and the scaling of the turbulent structure with the drift scale. To this end, a 64 tip Langmuir probe array has been used, which is poloidally positioned on a flux surface. For the first time, the parallel dynamics of turbulence has been investigated in the core of a toroidally confined plasma. In contrast to previous experiments, multi-probe measurements were carried out to get simultaneous information on the shape and the propagation direction of the turbulent structures. The results for the parallel wave number and the parallel propagation velocity have been compared with results from the simulation code GEM3. It is demonstrated that the propagation in the direction parallel to the magnetic field is affected by Alfven dynamics. Together, these results strongly confirm previous investigations, which have demonstrated the importance of drift-wave turbulence in TJ-K and therefore also in fusion edge plasma. (orig.)

  9. Investigation of three-dimensional turbulent structures in the torsatron TJ-K

    Energy Technology Data Exchange (ETDEWEB)

    Mahdizadeh, N.

    2007-02-14

    In this work, for the first time, the three-dimensional nature of drift waves has been verified experimentally inside the confinement region of the toroidal plasma in TJ-K. The perpendicular dynamics of turbulence has been studied with the focus on the poloidal wavenumber spectra and the scaling of the turbulent structure with the drift scale. To this end, a 64 tip Langmuir probe array has been used, which is poloidally positioned on a flux surface. For the first time, the parallel dynamics of turbulence has been investigated in the core of a toroidally confined plasma. In contrast to previous experiments, multi-probe measurements were carried out to get simultaneous information on the shape and the propagation direction of the turbulent structures. The results for the parallel wave number and the parallel propagation velocity have been compared with results from the simulation code GEM3. It is demonstrated that the propagation in the direction parallel to the magnetic field is affected by Alfven dynamics. Together, these results strongly confirm previous investigations, which have demonstrated the importance of drift-wave turbulence in TJ-K and therefore also in fusion edge plasma. (orig.)

  10. Investigation of dielectric properties of heterostructures based on ZnO structures

    Directory of Open Access Journals (Sweden)

    Selçuk A.H.

    2018-03-01

    Full Text Available The voltage and frequency dependence of dielectric constant є′, dielectric loss є″, electrical modulus M″, M′, loss tangent tanδ and AC electrical conductivity σAC of p-Si/ZnO/PMMA/Al, p-Si/ZnO/Al and p-Si/PMMA/Al structures have been investigated by means of experimental G-V and C-V measurements at 30 kHz, 100kHz, 500 kHz and 1 MHz in this work. While the values of є′, є″, tanδ and σAC decreased, the values of M′ and M″ increased for these structures when frequency was increased and those of p-Si/ZnO/Al and p-Si/PMMA/Al were comparable with those of p-Si/ZnO/PMMA/Al. The obtained results showed that the values of p-Si/ZnO/PMMA/Al structure were lower than the values of p-Si/ZnO/Al and p-Si/PMMA/Al.

  11. Research Capacity at Traditional Chinese Medicine (TCM Centers in China: A Survey of Clinical Investigators

    Directory of Open Access Journals (Sweden)

    Shuo Feng

    2017-01-01

    Full Text Available Background. The development of an evidence-based approach to traditional Chinese medicine (TCM, which depends on the generation of good quality evidence, requires an adequate workforce. However, the research capacity of TCM investigators is not known. Study Design. This cross-sectional study was conducted to describe the research capacity of TCM clinical investigators in China. Participants. A total of 584 participants from TCM hospitals and research centers were included. They were asked about the academic and research characteristics, needs for research capacity building, and barriers to clinical research. Results. The majority (80.82% were qualified to at least a Master’s degree, whilst a smaller proportion (40.24% held a senior professional title. We found that academic outputs were low with the majority (62.16% authoring less than five publications in total. The most pressing needs for building research capacity identified were training in research methodology (97.43% and identification of research questions (86.81%, whilst the highest ranking barriers to conducting research were limited motivation, funding (40.72%, and time (37.15%. Conclusion. The methodology training, along with investment in the research workforce, needs to be urgently addressed to improve investigators’ research capacity and the development of an evidence-based approach of TCM.

  12. ASSESSMENT FORM - NEW IMPROVEMENT OF ACTIONS: CONCENTRATION AND RESEARCH AREAS / CURRICULUM STRUCTURE / FUNDRAISING

    Directory of Open Access Journals (Sweden)

    Iracema MP Calderon

    Full Text Available Objective: This review aims to develop a critical and current analysis of the basic structure of a Postgraduate program for proposing improvement actions and new evaluation criteria. Method: To examine the items that are areas of concentration (AC, research lines (LP, research projects (PP, curricular structure and fundraising were consulted the Area Document, the 2013 Evaluation Report and the Assessment Sheets of Medicine III programs, evaluated in the 2010-2012 period. Results: Consistency is recommended especially among AC, LP and PP, with genuine link between activities and permanent teachers skills and based on structured curriculum in the education of the student. The Program Proposal interfere, and much, in qualifying a program. The curriculum should provide subsidy to the formation of the researcher, through the core subjects, and development of PP, being the concept of disciplines to support lines and research projects. Fundraise should be set out in research projects and in the CV-Lattes. The area recommended that at least 40-50% of permanent teachers present fundraising and the minimum 20-25% of these teachers to have productivity scholarship PQ / CNPq during the triennium. Conclusion: It is necessary to promote wide discussion and find a consensus denominator for these issues. The actions should contribute to the improvement of evaluation forms and certainly for the qualification of the programs but graduate.

  13. Geological investigations for geological model of deep underground geoenvironment at the Mizunami Underground Research Laboratory (MIU)

    International Nuclear Information System (INIS)

    Tsuruta, Tadahiko; Tagami, Masahiko; Amano, Kenji; Matsuoka, Toshiyuki; Kurihara, Arata; Yamada, Yasuhiro; Koike, Katsuaki

    2013-01-01

    Japan Atomic Energy Agency (JAEA) is performing a geoscientific research project, the Mizunami Underground Research Laboratory (MIU) project, in order to establish scientific and technological basis for geological disposal of high-level radioactive wastes. The MIU is located in crystalline rock environment, in Mizunami City, central Japan. Field investigations include geological mapping, reflection seismic surveys, several borehole investigations and geological investigations in the research galleries to identify the distribution and heterogeneity of fractures and faults that are potential major flowpaths for groundwater. The results of these field investigations are synthesized and compiled for the purpose of geological modeling. The field investigations indicate that the Main Shaft at the MIU intersected low permeability NNW oriented faults. A high permeability fracture zone in the granite, a significant water inflow point, was observed in the Ventilation Shaft. Development of the geological model focusing 3D spatial relationships at different scales and evolution of the geoenvironment are underway. This paper describes geological investigations applied in the MIU project, focusing on the evaluation of their effectiveness to understand for deep underground geoenvironment. (author)

  14. Investigation of nuclear structures using transition probabilities

    International Nuclear Information System (INIS)

    Dewald, A.; Moeller, O.; Peusquens, R.

    2002-01-01

    Magnetic rotation which appears as regular M1 bands in the spectra, is a well established phenomenon in several Pb isotopes. In the A = 130 region where similar M1 bands are known, e.g. in 124 Xe and 128 Ba, it is still not clear whether it does exists. Crucial experimental observables are the B (M1) values which -are expected to decrease with in creasing spin. At Strasbourg a recoil distance measurement (RDM) with the EUROBALL spectrometer at Strasbourg and the Koeln plunger using the reaction 110 Pd( 18 O, 4n) 124 Xe at a beam energy of 86 MeV yielded preliminary lifetimes of ground band states and states of the M1 band. The deduced B(M1) values show the expected behaviour for magnetic rotation. It is also shown that the experimental B(M1) values can be described as well on the basis of a rotational band. The measured B(E2) values are used to investigate the nuclear deformation of 124 Xe as well as the interaction of the ground state band with two s-bands. Spherical deformed shape coexistence is investigated by means of electromagnetic transition probabilities in the case of 188 Pb. Lifetimes were measured in 188 Pb using a novel combination of the Koeln plunger device with the GSFMA set-up at ATLAS. The reaction 40 Ca ( 152 Sm, 4n) 188 Pb at a beam energy of 725 MeV in inverse kinematics is used. It is found that the lowest 2 + state is predominantly of prolate structure

  15. Infrared Spectroscopic Study For Structural Investigation Of Lithium Lead Silicate Glasses

    International Nuclear Information System (INIS)

    Ahlawat, Navneet; Aghamkar, Praveen; Ahlawat, Neetu; Agarwal, Ashish; Monica

    2011-01-01

    Lithium lead silicate glasses with composition 30Li 2 O·(70-x)PbO·xSiO 2 (where, x = 10, 20, 30, 40, 50 mol %)(LPS glasses) were prepared by normal melt quench technique at 1373 K for half an hour in air to understand their structure. Compositional dependence of density, molar volume and glass transition temperature of these glasses indicates more compactness of the glass structure with increasing SiO 2 content. Fourier transform infrared (FTIR) spectroscopic data obtained for these glasses was used to investigate the changes induced in the local structure of samples as the ratio between PbO and SiO 2 content changes from 6.0 to 0.4. The observed absorption band around 450-510 cm -1 in IR spectra of these glasses indicates the presence of network forming PbO 4 tetrahedral units in glass structure. The increase in intensity with increasing SiO 2 content (upto x = 30 mol %) suggests superposition of Pb-O and Si-O bond vibrations in absorption band around 450-510 cm -1 . The values of optical basicity in these glasses were found to be dependent directly on PbO/SiO 2 ratio.

  16. Fluid-structure interaction investigations for pipelines

    International Nuclear Information System (INIS)

    Altstadt, E.; Carl, H.; Weiss, R.

    2003-12-01

    In existing Nuclear Power Plants water hammers can occur in case of an inflow of sub-cooled water into pipes or other parts of the equipment, which are filled with steam or steam-water mixture. They also may appear as the consequence of fast valve closing or opening actions or of breaks in pipelines, with single phase or two-phase flow. In the latter case, shock waves in two-phase flow must be expected. In all cases, strong dynamic stresses are induced in the wall of the equipment. Further, the change of the momentum of the liquid motion and the deformation of the component due to the dynamic stresses generate high loads on the support structures of the component, in which the water hammer respectively the shock wave occurs. The influence of the fluid-structure interaction on the magnitude of the loads on pipe walls and support structures is not yet completely understood. In case of a dynamic load caused by a pressure wave, the stresses in pipe walls, especially in bends, are different from the static case. The propagating pressure wave may cause additional non-symmetric deformations which increase the equivalent stresses in comparison to the symmetric load created by a static inner pressure. On the other hand, fluid-structure interaction causes the structure to deform, which leads to a decrease of the resulting stresses. The lack of experimental data obtained at well defined geometric boundary conditions is a significant obstacle for the validation of codes which consider fluid-structure interaction. Furthermore, up to now the feedback from structural deformations to the fluid mechanics has not been fully implemented in existing calculation software codes. Therefore, at FZR a cold water hammer test facility (CWHTF) was designed and built up. (orig.)

  17. Investigations of Nuclear Structure

    Energy Technology Data Exchange (ETDEWEB)

    Sarantites, Demetrios [Washington Univ., St. Louis, MO (United States); Reviol, W. [Washington Univ., St. Louis, MO (United States)

    2015-07-15

    The proposal addresses studies of nuclear structure at low-energies and development of instrumentation for that purpose. The structure studies deal with features of neutron-rich nuclei with unexplored shapes (football- or pear-shaped nuclei). The regions of interest are: neutron rich nuclei like 132-138Sn, or 48-54Ca, and the Zr, Mo, and Ru isotopes. The tools used can be grouped as follows: either Gammasphere or Gretina multi-gamma detector arrays and auxiliary detectors (Microball, Neutron Shell, and the newly completed Phoswich Wall).The neutron-rich nuclei are accessed by radioactive-beam binary reactions or by 252Cf spontaneous fission. The experiments with heavy radioactive beams aim at exciting the beam nuclei by pick-up or transfer a neutron or a proton from a light target like 13C, 9Be, 11B or 14N .For these binary-reaction studies the Phoswich Wall detector system is essential. It is based on four multi-anode photomultiplier tubes on which CsI and thin fast-timing plastic scintillators are attached. Their signals are digitized with a high density microchip system.

  18. Investigating the Synthesis, Structure, and Catalytic Properties of Versatile Gold-Based Nanocatalvsts

    Science.gov (United States)

    Pretzer, Lori A.

    Transition metal nanomaterials are used to catalyze many chemical reactions, including those key to environmental, medicinal, and petrochemical fields. Improving their catalytic properties and lifetime would have significant economic and environmental rewards. Potentially expedient options to make such advancements are to alter the shape, size, or composition of transition metal nanocatalysts. This work investigates the relationships between structure and catalytic properties of synthesized Au, Pd-on-Au, and Au-enzyme model transition metal nanocatalysts. Au and Pd-on-Au nanomaterials were studied due to their wide-spread application and structure-dependent electronic and geometric properties. The goal of this thesis is to contribute design procedures and synthesis methods that enable the preparation of more efficient transition metal nanocatalysts. The influence of the size and composition of Pd-on-Au nanoparticles (NPs) was systematically investigated and each was found to affect the catalyst's surface structure and catalytic properties. The catalytic hydrodechlorination of trichloroethene and reduction of 4-nitrophenol by Pd-on-Au nanoparticles were investigated as these reactions are useful for environmental and pharmaceutical synthesis applications, respectively. Structural characterization revealed that the dispersion and oxidation state of surface Pd atoms are controlled by the Au particle size and concentration of Pd. These structural changes are correlated with observed Pd-on-Au NP activities for both probe reactions, providing new insight into the structure-activity relationships of bimetallic nanocatalysts. Using the structure-dependent electronic properties of Au NPs, a new type of light-triggered biocatalyst was prepared and used to remotely control a model biochemical reaction. This biocatalyst consists of a model thermophilic glucokinase enzyme covalently attached to the surface of Au nanorods. The rod-like shape of the Au nanoparticles made the

  19. Numerical Investigations into the Value of Information in Lifecycle Analysis of Structural Systems

    DEFF Research Database (Denmark)

    Konakli, Katerina; Sudret, Bruno; Faber, Michael Havbro

    2015-01-01

    of decisions related to maintenance of structural systems. In this context, experiments may refer to inspections or structural health monitoring. The value-of-information concept comprises a powerful tool for determining whether the experimental cost is justified by the expected gained benefit during...... investigations demonstrate how the decision problem is influenced by the assumed probabilistic models, including the type of probability distribution and the degree of uncertainty reflected in the coefficient of variation, the degradation law, the quantity and quality of information, and the probabilistic...... dependencies between the components of a system. Furthermore, challenges and potentials in value-of-information analysis for structural systems are discussed....

  20. X-ray structural investigation into complexes of p-aminobenzoic acid and metals

    International Nuclear Information System (INIS)

    Amiraslanov, I.R.; Musaev, F.N.; Mamedov, Kh.S.

    1982-01-01

    X-ray structural investigation of p-aminobenzoatodiaqua-strontium Sr(H 2 NC 6 H 4 COO) 2 x2H 2 o' was carried out. Crystals were rhombic: a=6.86(1), b=13.39(2), c=18.58(2) A, V=1705 A, Z=4, space group P2 1 2 1 2 1 . The basis of the structure was formed by infinite along the axis a chains of strontium atom octavertices articulated with common oxygen vertices. Sr-O bond lengths were 2.46-2.74 A; the distance between strontium neighbour - ring atom 4.07(1) A. Bond angles were presented

  1. Structural DNA Nanotechnology: Artificial Nanostructures for Biomedical Research.

    Science.gov (United States)

    Ke, Yonggang; Castro, Carlos; Choi, Jong Hyun

    2018-04-04

    Structural DNA nanotechnology utilizes synthetic or biologic DNA as designer molecules for the self-assembly of artificial nanostructures. The field is founded upon the specific interactions between DNA molecules, known as Watson-Crick base pairing. After decades of active pursuit, DNA has demonstrated unprecedented versatility in constructing artificial nanostructures with significant complexity and programmability. The nanostructures could be either static, with well-controlled physicochemical properties, or dynamic, with the ability to reconfigure upon external stimuli. Researchers have devoted considerable effort to exploring the usability of DNA nanostructures in biomedical research. We review the basic design methods for fabricating both static and dynamic DNA nanostructures, along with their biomedical applications in fields such as biosensing, bioimaging, and drug delivery. Expected final online publication date for the Annual Review of Biomedical Engineering Volume 20 is June 4, 2018. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

  2. Investigation of properties of modified oxides structured by nano technology

    International Nuclear Information System (INIS)

    Kurina, I.S.; Serebrennikova, O.V.; Rumyantsev, V.N.; Dvoryashin, A.M.

    2009-01-01

    Research results on the PuO 2 +MgO fuel composition with CeO 2 as a PuO 2 simulator are presented. The water nano technology for the production of oxide ceramic materials, developed in IPPE, was used for fabrication of powders and modified pellets. This technology includes obtaining precipitate, consisting of particles of different sizes as well as of nanoparticles, which is further calcined, pressed and sintered. It results in modifying structure of the sintered pellets. Modified pellets have anomalously high thermal conductivity measured by the axial heat flux method [ru

  3. Research and development issues for fast reactor structural design standard (FDS)

    International Nuclear Information System (INIS)

    Kasahara, Naoto; Ando, Masanori; Morishita, Masaki

    2003-01-01

    For realization of safe and economical fast reactor (FR) plants, Japan Nuclear Cycle Development Institute (JNC) and Japan Atomic Power Company (JAPC) are cooperating on 'Feasibility Study on Commercialized FR Cycle Systems'. To certify the design concepts and validate their structural integrity, the research and development of 'Fast Reactor Structural Design Standard (FDS)' is recognized as an essential theme. FDS considers general characteristics of FRs and design needs for their rationalization. Three main subjects were settled in research and development issues of FDS. One is rationalization of failure criteria' taking characteristic design conditions into account. Next is development of 'a guideline on inelastic analysis for design' in order to predict elastic plastic and creep behaviours of high temperature components. Furthermore, efforts are being made toward preparing a guideline on thermal loads modeling' for FR component design where thermal loads are dominant. (author)

  4. The Folding and Fracturing of Rocks: A milestone publication in Structural Geology research

    Science.gov (United States)

    Lisle, Richard; Bastida, Fernando

    2017-04-01

    In the field of structural geology, the textbook written by John G Ramsay in 1967, reprinted in 2004 and translated into Spanish and Chinese, is the one that has made the greatest research impact. With citations exceeding 4000 (Google Scholar) it far surpasses books by other authors on the subject, with this figure only being approached by his later book Modern Structural Geology (Ramsay and Huber 1983). In this paper we consider the factors that account for the book's success despite the fact that it is a research-level text beyond the comfort zone of most undergraduates. We also take stock of other measures of the book's success; the way it influenced the direction subsequent research effort. We summarize the major advances in structural geology that were prompted by Ramsay's book. Finally we consider the book's legacy. Before the publication of the book in 1967 structural geology had been an activity that had concentrated almost exclusively on geological mapping aimed at establishing the geometrical configuration of rock units. In fact, Ramsay himself has produced beautiful examples of such maps. However, the book made us aware that the geometrical pattern is controlled by the spatial variation of material properties, the boundary conditions, the deformation environment and the temporal variation of stresses. With the arrival of the book Structural Geology came of age as a modern scientific discipline that employed a range of tools such as those of physics, maths and engineering as well as those of geology.

  5. Research Costs Investigated: A Study Into the Budgets of Dutch Publicly Funded Drug-Related Research.

    Science.gov (United States)

    van Asselt, Thea; Ramaekers, Bram; Corro Ramos, Isaac; Joore, Manuela; Al, Maiwenn; Lesman-Leegte, Ivonne; Postma, Maarten; Vemer, Pepijn; Feenstra, Talitha

    2018-01-01

    The costs of performing research are an important input in value of information (VOI) analyses but are difficult to assess. The aim of this study was to investigate the costs of research, serving two purposes: (1) estimating research costs for use in VOI analyses; and (2) developing a costing tool to support reviewers of grant proposals in assessing whether the proposed budget is realistic. For granted study proposals from the Netherlands Organization for Health Research and Development (ZonMw), type of study, potential cost drivers, proposed budget, and general characteristics were extracted. Regression analysis was conducted in an attempt to generate a 'predicted budget' for certain combinations of cost drivers, for implementation in the costing tool. Of 133 drug-related research grant proposals, 74 were included for complete data extraction. Because an association between cost drivers and budgets was not confirmed, we could not generate a predicted budget based on regression analysis, but only historic reference budgets given certain study characteristics. The costing tool was designed accordingly, i.e. with given selection criteria the tool returns the range of budgets in comparable studies. This range can be used in VOI analysis to estimate whether the expected net benefit of sampling will be positive to decide upon the net value of future research. The absence of association between study characteristics and budgets may indicate inconsistencies in the budgeting or granting process. Nonetheless, the tool generates useful information on historical budgets, and the option to formally relate VOI to budgets. To our knowledge, this is the first attempt at creating such a tool, which can be complemented with new studies being granted, enlarging the underlying database and keeping estimates up to date.

  6. Compassion and vigilance: investigators' strategies to manage ethical concerns in palliative and end-of-life research.

    Science.gov (United States)

    Hickman, Susan E; Cartwright, Juliana C; Nelson, Christine A; Knafl, Kathleen

    2012-08-01

    Ethical concerns were identified as a potential barrier to advancing palliative and end-of-life science at the 2004 National Institutes of Health State of the Science Meeting. However, data are lacking about the nature of ethical concerns and strategies for balancing the need to advance science with human subjects protections. A qualitative case-study design was used to follow 43 end-of-life studies from proposal development through the review process and implementation. Investigators participated in semi-structured telephone interviews and provided document data regarding their experiences with grant and IRB reviews. Using constant comparative analysis within and across cases, the investigators identified commonly encountered and unique concerns and strategies for managing these concerns. Investigator strategies fell into two broad categories: 1) Recruitment and consent strategies related to subject identification and enrollment; and 2) Protocol-related strategies related to the process of data collection. These strategies shared the overarching meta-themes of compassion, as evidenced by a heightened sensitivity to the needs of the population, coupled with vigilance, as evidenced by close attention to the possible effects of study participation on the participants' well-being, clinical care, and the needs of research staff. Ethical concerns have led to the development of compassionate and vigilant strategies designed to balance the potential for risk of harm with the need to advance the science of palliative and end-of-life care. These strategies can be used by investigators to address ethical concerns and minimize barriers to the development of palliative and end-of-life care science.

  7. Investigation of structural properties associated with alkali-silica reaction by means of macro- and micro-structural analysis

    International Nuclear Information System (INIS)

    Mo Xiangyin; Fournier, Benoit

    2007-01-01

    Structural properties associated with alkali-silica reaction were systematically investigated by means of macro-structural accelerated mortar prism expansion levels testing, combined with micro-structural analysis. One part of this study is to determine the reactivity of the aggregate by means of accelerated mortar bar tests, and also to evaluate perlite aggregate constituents, especially the presence of deleterious components and find main causes of the alkali-silica reaction, which was based on the petrographic studies by optical microscope and the implication of X-ray diffraction on the aggregate. Results implied that the aggregate was highly alkali-silica reactive and the main micro-crystalline quartz-intermediate character and matrix that is mainly composed of chalcedony are potentially suitable for alkali-silica reaction. The other part is to study the long-term effect of lithium salts against alkali-silica reaction by testing accelerated mortar prism expansion levels. The macro-structural results were also consistent with the micro-structural mechanisms of alkali-silica reaction of mortar prisms containing this aggregate and the effect of chemical admixtures by means of the methods of scanning electron microscope-X-ray energy-dispersive spectroscopy and X-ray diffraction. It was indicated by these techniques that lithium salts, which were introduced into concrete containing reactive aggregate at the mixing stage, suppressed the alkali-silica reaction by producing non-expansive crystalline materials

  8. Investigation of current university research concerning energy conversion and conservation in small single-family dwellings

    Science.gov (United States)

    Grossman, G. R.; Roberts, A. S., Jr.

    1975-01-01

    An investigation was made of university research concerning energy conversion and conservation techniques which may be applied in small single-family residences. Information was accumulated through published papers, progress reports, telephone conversations, and personal interviews. A synopsis of each pertinent investigation is given. Finally, a discussion of the synopses is presented and recommendations are made concerning the applicability of concepts for the design and construction of NASA-Langley Research Center's proposed Technology Utilization House in Hampton, Virginia.

  9. The role of temporal structure in the investigation of sensory memory, auditory scene analysis, and speech perception: a healthy-aging perspective.

    Science.gov (United States)

    Rimmele, Johanna Maria; Sussman, Elyse; Poeppel, David

    2015-02-01

    Listening situations with multiple talkers or background noise are common in everyday communication and are particularly demanding for older adults. Here we review current research on auditory perception in aging individuals in order to gain insights into the challenges of listening under noisy conditions. Informationally rich temporal structure in auditory signals--over a range of time scales from milliseconds to seconds--renders temporal processing central to perception in the auditory domain. We discuss the role of temporal structure in auditory processing, in particular from a perspective relevant for hearing in background noise, and focusing on sensory memory, auditory scene analysis, and speech perception. Interestingly, these auditory processes, usually studied in an independent manner, show considerable overlap of processing time scales, even though each has its own 'privileged' temporal regimes. By integrating perspectives on temporal structure processing in these three areas of investigation, we aim to highlight similarities typically not recognized. Copyright © 2014 Elsevier B.V. All rights reserved.

  10. [Research in theoretical nuclear physics

    International Nuclear Information System (INIS)

    1993-01-01

    Research in progress and plans for future investigations are briefly summarized for the following areas: light-ion structure and reactions; nuclear structure; peripheral heavy-ion reactions at medium and high energy; medium-energy heavy-ion collisions and properties of highly excited nuclear matter; and high-energy heavy-ion collisions and QCD plasma

  11. SeqHound: biological sequence and structure database as a platform for bioinformatics research

    Directory of Open Access Journals (Sweden)

    Dumontier Michel

    2002-10-01

    Full Text Available Abstract Background SeqHound has been developed as an integrated biological sequence, taxonomy, annotation and 3-D structure database system. It provides a high-performance server platform for bioinformatics research in a locally-hosted environment. Results SeqHound is based on the National Center for Biotechnology Information data model and programming tools. It offers daily updated contents of all Entrez sequence databases in addition to 3-D structural data and information about sequence redundancies, sequence neighbours, taxonomy, complete genomes, functional annotation including Gene Ontology terms and literature links to PubMed. SeqHound is accessible via a web server through a Perl, C or C++ remote API or an optimized local API. It provides functionality necessary to retrieve specialized subsets of sequences, structures and structural domains. Sequences may be retrieved in FASTA, GenBank, ASN.1 and XML formats. Structures are available in ASN.1, XML and PDB formats. Emphasis has been placed on complete genomes, taxonomy, domain and functional annotation as well as 3-D structural functionality in the API, while fielded text indexing functionality remains under development. SeqHound also offers a streamlined WWW interface for simple web-user queries. Conclusions The system has proven useful in several published bioinformatics projects such as the BIND database and offers a cost-effective infrastructure for research. SeqHound will continue to develop and be provided as a service of the Blueprint Initiative at the Samuel Lunenfeld Research Institute. The source code and examples are available under the terms of the GNU public license at the Sourceforge site http://sourceforge.net/projects/slritools/ in the SLRI Toolkit.

  12. A Non-Structural Investigation of VIX Risk Neutral Density

    DEFF Research Database (Denmark)

    Barletta, Andrea; Santucci de Magistris, Paolo; Violante, Francesco

    We propose a non-structural pricing method to derive the risk-neutral density (RND) implied by options on the CBOE Volatility Index (VIX). The methodology is based on orthogonal polynomial expansions around a kernel density and yields the RND of the underlying asset without the need for a paramet......We propose a non-structural pricing method to derive the risk-neutral density (RND) implied by options on the CBOE Volatility Index (VIX). The methodology is based on orthogonal polynomial expansions around a kernel density and yields the RND of the underlying asset without the need...... for a parametric specification. The classic family of Laguerre expansions is extended to include the GIG and the generalized Weibull kernels, thus relaxing the conditions required on the tail decay rate of the RND to ensure convergence. We show that the proposed methodology yields an accurate approximation...... of the RND in a large variety of cases, also when the no-arbitrage and efficient option prices are contaminated by measurement errors. Our empirical investigation, based on a panel of traded VIX options, reveals some stylized facts on the RND of VIX. We find that a common stochastic factor drives the dynamic...

  13. Television-aided thermographic investigations in nuclear and solid state research

    International Nuclear Information System (INIS)

    Buettig, H.; Wollschlaeger, K.

    1983-01-01

    After a brief review of the physical and hardware fundamentals of televison-aided thermographic investigations, two practical examples of nuclear and solid state research work are presented. The problems discussed concern studies of the relative density distribution in beams of particles (ions, electrons, neutral atoms) or of visible radiation on the one hand, and the optimization of operating conditions in heavy-current implantations (ion implantation in Si at ion beam currents up to 60 μA) on the other hand

  14. STRUCTURE AND MECHANICAL PROPERTIES’ RESEARCH OF A500C-CLASS REINFORCEMENT BARS

    Directory of Open Access Journals (Sweden)

    A. M. Yaznevich

    2010-01-01

    Full Text Available Structural and mechanical properties of A500C-class reinforcement bars are investigated in the paper. The paper demonstrates that rolled products of thermally strengthened reinforcement have a layered structure with coaxially located layers having different mechanical characteristics. Micro-hardness measurements have shown that the maximum hardness has a pre-surface part of a reinforcement bar, and the minimum hardness is in the central part. Thickness of the strengthened surface layers grows while increasing a diameter and at preservation of structural composition. 

  15. Population structure of Salmonella investigated by amplified fragment length polymorphism

    DEFF Research Database (Denmark)

    Torpdahl, M.; Ahrens, Peter

    2004-01-01

    Aims: This study was undertaken to investigate the usefulness of amplified fragment length polymorphism (AFLP) in determining the population structure of Salmonella. Methods and Results: A total of 89 strains were subjected to AFLP analysis using the enzymes BglII and BspDI, a combination...... that is novel in Salmonella. Both species S. bongori and S. enterica and all subsp. of S. enterica were represented with emphasis on S. enterica subsp. enterica using a local strain collection and strains from the Salmonella Reference Collection B (SARB). The amplified fragments were used in a band...

  16. Electronic structure of germanium selenide investigated using ultra-violet photo-electron spectroscopy

    Science.gov (United States)

    Mishra, P.; Lohani, H.; Kundu, A. K.; Patel, R.; Solanki, G. K.; Menon, Krishnakumar S. R.; Sekhar, B. R.

    2015-07-01

    The valence band electronic structure of GeSe single crystals has been investigated using angle resolved photoemission spectroscopy (ARPES) and x-ray photoelectron spectroscopy. The experimentally observed bands from ARPES, match qualitatively with our LDA-based band structure calculations along the Γ-Z, Γ-Y and Γ-T symmetry directions. The valence band maximum occurs nearly midway along the Γ-Z direction, at a binding energy of -0.5 eV, substantiating the indirect band gap of GeSe. Non-dispersive features associated with surface states and indirect transitions have been observed. The difference in hybridization of Se and Ge 4p orbitals leads to the variation of dispersion along the three symmetry directions. The predominance of the Se 4pz orbitals, evidenced from theoretical calculations, may be the cause for highly dispersive bands along the Γ-T direction. Detailed electronic structure analysis reveals the significance of the cation-anion 4p orbitals hybridization in the valence band dispersion of IV-VI semiconductors. This is the first comprehensive report of the electronic structure of a GeSe single crystal using ARPES in conjugation with theoretical band structure analysis.

  17. Electronic structure of germanium selenide investigated using ultra-violet photo-electron spectroscopy

    International Nuclear Information System (INIS)

    Mishra, P; Lohani, H; Sekhar, B R; Kundu, A K; Menon, Krishnakumar S R; Patel, R; Solanki, G K

    2015-01-01

    The valence band electronic structure of GeSe single crystals has been investigated using angle resolved photoemission spectroscopy (ARPES) and x-ray photoelectron spectroscopy. The experimentally observed bands from ARPES, match qualitatively with our LDA-based band structure calculations along the Γ–Z, Γ–Y and Γ–T symmetry directions. The valence band maximum occurs nearly midway along the Γ–Z direction, at a binding energy of −0.5 eV, substantiating the indirect band gap of GeSe. Non-dispersive features associated with surface states and indirect transitions have been observed. The difference in hybridization of Se and Ge 4p orbitals leads to the variation of dispersion along the three symmetry directions. The predominance of the Se 4p z orbitals, evidenced from theoretical calculations, may be the cause for highly dispersive bands along the Γ–T direction. Detailed electronic structure analysis reveals the significance of the cation–anion 4p orbitals hybridization in the valence band dispersion of IV–VI semiconductors. This is the first comprehensive report of the electronic structure of a GeSe single crystal using ARPES in conjugation with theoretical band structure analysis. (paper)

  18. Social class and the STEM career pipeline an ethnographic investigation of opportunity structures in a high-poverty versus affluent high school

    Science.gov (United States)

    Nikischer, Andrea B.

    This research investigates science, technology, engineering and mathematics (STEM) high school opportunity structures, including student experiences with math and science course sequences and progress, college guidance and counseling, and STEM extracurricular activities (Weis and Eisenhart, 2009), specifically related to STEM fields and career and college choice, for top-performing math and science students. Differences in these structures and processes as they play out in two representative high schools that vary by social class and racial/ethnic makeup are examined. This comparative ethnography includes 36 school and classroom observations, 56 semi-structured individual interviews, and a review of relevant documents, all gathered during the focal students' junior year of high school. Three data chapters are presented, discussing three distinct, yet interconnected themes. In the first, I examine the ways in which chronic attendance problems and classroom distractions negatively impact math and science instruction time and lead to an instruction (time) deficit. In the second, I compare the math and science course and extra-curricular offerings at each school, and discuss the significant differences between sites regarding available STEM exposure and experience, also known as "STEM educational dose" (Wai, et al., 2010). In the third, I investigate available guidance counseling services and STEM and college-linking at each site. Perceived failures in the counseling services available are discussed. This dissertation is grounded in the literature on differences in academic achievement based on school setting, the nature/distribution of knowledge based on social class, and STEM opportunity structures. The concepts of "social capital" and "STEM capital" are engaged throughout. Ultimately, I argue through this dissertation that segregation by race, and most importantly social class, both between and within districts, damages the STEM pipeline for high-performing math and

  19. Research and development on materials, structural strength and seismic integrity of FBR components

    International Nuclear Information System (INIS)

    Sumikawa, Masaharu; Kirihara, Seishin; Shigeta, Masayuki; Shimoyashiki, Shigehiro; Nishioka, Akio.

    1982-01-01

    For designing high temperature structures of FBRs, highly reliable design is required on the basis of safety requirement. At the same time, it is necessary to guarantee the soundness of structures over the total design life of plants. Since the high temperature equipments are operated in a creep temperature region and show nonlinear behaviour, nonlinear structural analysis is required. Hitachi Ltd., based on the concept of verifying the latest technology to reflect it to the design along with its adoption, has progressed various research and development by organizing a project team collecting specialists in the company, independently developing and modifying the nonlinear structural analysis and evaluation program, and establishing the organization through the introduction of a general purpose large scale computer. The research and development for materials include the development of the strength standards for high temperature structural materials and the improvement of the high temperature characteristics of JIS stainless steel SUS 321. In the R and D for high temperature strength, the test on the deforming behaviour of plates due to bending creep, the thermal shock test for steam generator tube plates and others were performed. In the R and D for seismic integrity, the vibration test of piping support structure and the development of detailed seismic property evaluation program are mentioned. (Wakatsuki, Y.)

  20. Horonobe underground research laboratory project investigation report for the 2005 fiscal year

    International Nuclear Information System (INIS)

    Matsui, Hiroya; Niizato, Tadafumi; Yamaguchi, Takehiro

    2006-11-01

    The investigations in 2005 fiscal year (2005/2006) were focused on the Hokushin area, which was selected as the area for laboratory construction. The main investigation region extends over approximately 3 km x 3 km. Geophysical, geological and surface hydrogeological investigations are carried out to acquire the geoscientific data needed to develop techniques for investigating the geological environment. And the borehole investigation at HDB-11 was finished in 2005. About development of techniques for long-term monitoring of the geological environment, long-term monitoring systems were operative in boreholes drilled in a previous investigation, and were also installed in the remaining boreholes (HDB-9, 10; drilled in 2004). A remotely operated monitoring system (ACROSS) was also installed and tested. About study on long-term stability of the geological environment, for tracing tectonic changes at Horonobe, geological survey and ground penetrating radar were carried out. Observations using seismograph, global positioning system (GPS) and electromagnetic exploration system installed until 2006 were continuing. About improving the reliability of disposal technology, laboratory tests of low alkaline concrete, shotcrete test at full-size simulated tunnel were carried out. Applicability confirmation of EBS designing methods was carried out with geological environmental data of Phase 1. About sophistication of safety assessment methodologies, Sorption test using drill core was carried out. Solute transport analysis was also carried out. In parallel with these investigations, Phase 2 investigation program were planned. About surface facility, Research and Administration Facility and Test Facility were constructed and started to use since February 2006. Public information house was begun to construct. About underground facility, temporary surplus soil (muck) yard was constructed. Surplus soil yard and drainage line were designed. These caused by toxic substance founded in

  1. Pursuing Qualitative Research From the Global South: "Investigative Research" During China's "Great Leap Forward" (1958-62

    Directory of Open Access Journals (Sweden)

    Ping-Chun Hsiung

    2015-07-01

    Full Text Available Over the last decade, qualitative researchers have begun to challenge the domination and universalistic claims of the Global North. Nevertheless, it is still unclear what pursuing qualitative research (QR from the Global South might entail. I advance this effort by situating it in the larger context of the decentering endeavor in social science and decolonizing methodologies in aboriginal scholarship. Informed by their locally-grounded approach in the quest for constructing alternative social science accounts and articulating decolonized knowledge, I argue that writing locally-grounded histories is an essential first step to explore methodologies and epistemologies of QR from the Global South. Noting that no national history of QR has been derived from the Global South, I present an example of writing the history of QR by examining MAO Zedong's legacy of "investigative research" (IR. Specifically, I analyze the practices of IR during China's "Great Leap Forward" (1958-62. In conclusion, I discuss the implications of IR to the development of social science research in contemporary China. I lay out key issues in pursuing QR from the Global South and present how such a pursuit is relevant to social science inquiry in the Global North. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs150325

  2. Electron-topological investigation of the structure-antitumor activity relationship of thiosemicarbazone derivatives.

    Science.gov (United States)

    Dimoglo, A S; Chumakov, Y M; Dobrova, B N; Saracoglu, M

    1997-04-01

    In the frameworks of the electron-topological method (ETM) the structure-antitumor activity relationship was investigated for a series of thiosemicarbazone derivatives. The series included 70 compounds. Conformational analysis and quantum-chemical calculations were carried out for each compound. The revealed activity feature showed a satisfactory description of the class of active compounds according to two different parameters P and alpha estimating the probabilities of the feature realization in the class of active compounds (they are equal to 0.94 and 0.86, correspondingly). The results of testing demonstrated the high ability of ETM in predicting the activity investigated.

  3. A 'Grantathon' model to mentor new investigators in mental health research.

    Science.gov (United States)

    Hawk, Mary; Nimgaonkar, Vishwajit; Bhatia, Triptish; Brar, Jaspreet S; Elbahaey, Wafaa Abdelhakim; Egan, James E; Konasale, Prasad; Kumar, Supriya; McDonald, Margaret C; Singh, Ravinder; Swaminathan, Soumya; Wood, Joel; Deshpande, Smita N

    2017-10-24

    There is a critical gap between needs and available resources for mental health treatment across the world, particularly in low- and middle-income countries (LMICs). In countries committed to increasing resources to address these needs it is important to conduct research, not only to assess the depth of mental health needs and the current provision of public and private mental health services, but also to examine implementation methods and evaluate mental health approaches to determine which methods are most effective in local contexts. However, research resources in many LMICs are inadequate, largely because conventional research training is time-consuming and expensive. Adapting a hackathon model may be a feasible method of increasing capacity for mental health services research in resource-poor countries. To explore the feasibility of this approach, we developed a 'grantathon', i.e. a research training workshop, to build capacity among new investigators on implementation research of Indian government-funded mental health programmes, which was based on a need expressed by government agencies. The workshop was conducted in Delhi, India, and brought together junior faculty members working in mental health services settings throughout the country, experienced international behavioural health researchers and representatives of the Indian Council for Medical Research (ICMR), the prime Indian medical research funding agency. Pre- and post-assessments were used to capture changes in participants' perceived abilities to develop proposals, design research studies, evaluate outcomes and develop collaborations with ICMR and other researchers. Process measures were used to track the number of single-or multi-site proposals that were generated and funded. Participants (n = 24) generated 12 single- or multi-site research grant applications that will be funded by ICMR. The grantathon model described herein can be modified to build mental health services research capacity in

  4. The use of scientific and technical results from underground research laboratory investigations for the geological disposal of radioactive waste

    International Nuclear Information System (INIS)

    2001-09-01

    The objective of the report is to provide information on the use of results obtained from underground research laboratory investigations for the development of a deep geological repository system for long lived and/or high level radioactive waste including spent fuel. Specifically, it should provide Member States that intend to start development of a geological disposal system with an overview of existing facilities and of the sorts and quality of results that have already been acquired. The report is structured into six main themes: rock characterization methodologies and testing; assessment of the geological barrier; assessment of the engineered barrier system; respository construction techniques; demonstration of repository operations; confidence building and international co-operation

  5. Scientific writing seminar for early-stage investigators in substance abuse research.

    Science.gov (United States)

    Guydish, Joseph; Masson, Carmen; Flentje, Annesa; Shopshire, Michael; Sorensen, James L

    2016-01-01

    There is little information on how to increase the scientific writing productivity of early-stage investigators in the addictions field. A scientific writing seminar is presented in this article, aiming to encourage manuscript writing and dissemination of addiction research, and outcomes are reported for 14 years of the seminar. In 14 years, there were 113 postdoctoral fellow enrollments in a 6-month writing seminar. Records of submission and publication rates of manuscripts were collected for 14 cohorts. Of the 113 participant enrollments, 97 (86%) submitted a manuscript for publication, and 87 participants (77%) published their manuscript. A scientific writing seminar may benefit writing productivity, but more research is needed to compare this training model with other existing models.

  6. Investigation of hidden periodic structures on SEM images of opal-like materials using FFT and IFFT.

    Science.gov (United States)

    Stephant, Nicolas; Rondeau, Benjamin; Gauthier, Jean-Pierre; Cody, Jason A; Fritsch, Emmanuel

    2014-01-01

    We have developed a method to use fast Fourier transformation (FFT) and inverse fast Fourier transformation (IFFT) to investigate hidden periodic structures on SEM images. We focused on samples of natural, play-of-color opals that diffract visible light and hence are periodically structured. Conventional sample preparation by hydrofluoric acid etch was not used; untreated, freshly broken surfaces were examined at low magnification relative to the expected period of the structural features, and, the SEM was adjusted to get a very high number of pixels in the images. These SEM images were treated by software to calculate autocorrelation, FFT, and IFFT. We present how we adjusted SEM acquisition parameters for best results. We first applied our procedure on an SEM image on which the structure was obvious. Then, we applied the same procedure on a sample that must contain a periodic structure because it diffracts visible light, but on which no structure was visible on the SEM image. In both cases, we obtained clearly periodic patterns that allowed measurements of structural parameters. We also investigated how the irregularly broken surface interfered with the periodic structure to produce additional periodicity. We tested the limits of our methodology with the help of simulated images. © 2014 Wiley Periodicals, Inc.

  7. NASA's Platform for Cross-Disciplinary Microchannel Research

    Science.gov (United States)

    Son, Sang Young; Spearing, Scott; Allen, Jeffrey; Monaco, Lisa A.

    2003-01-01

    A team from the Structural Biology group located at the NASA Marshall Space Flight Center in Huntsville, Alabama is developing a platform suitable for cross-disciplinary microchannel research. The original objective of this engineering development effort was to deliver a multi-user flight-certified facility for iterative investigations of protein crystal growth; that is, Iterative Biological Crystallization (IBC). However, the unique capabilities of this facility are not limited to the low-gravity structural biology research community. Microchannel-based research in a number of other areas may be greatly accelerated through use of this facility. In particular, the potential for gas-liquid flow investigations and cellular biological research utilizing the exceptional pressure control and simplified coupling to macroscale diagnostics inherent in the IBC facility will be discussed. In conclusion, the opportunities for research-specific modifications to the microchannel configuration, control, and diagnostics will be discussed.

  8. Hyperfine structure investigations for the odd-parity configuration system in atomic holmium

    Science.gov (United States)

    Stefanska, D.; Furmann, B.

    2018-02-01

    In this work new experimental results of the hyperfine structure (hfs) in the holmium atom are reported, concerning the odd-parity level system. Investigations were performed by the method of laser induced fluorescence in a hollow cathode discharge lamp on 97 spectral lines in the visible part of the spectrum. Hyperfine structure constants: magnetic dipole - A and electric quadrupole - B for 40 levels were determined for the first time; for another 21 levels the hfs constants available in the literature were remeasured. Results for the A constants can be viewed as fully reliable; for B constants further possibilities of improving the accuracy are considered.

  9. JSME guideline for evaluation of FIV of a cylindrical structure in a pipe and related researches

    International Nuclear Information System (INIS)

    Okajima, Atsushi; Morishita, Masaki; Nishihara, Takashi; Nakamura, Akira

    2004-01-01

    This paper reviews the recent studies of flow-induced vibration related to 'Guideline for Evaluation of Flow-induced Vibration of a Cylindrical Structure in a Pipe', the JSME standard S012-1998, published by Japan Society of Mechanical Engineers in 1998. For the past six years since its publication, a considerable number of studies have been conducted by universities, research institutes and plant manufacturers. The results of these studies validated this guideline and provided useful information to apply the guideline for an actual plant; the effect of cylinder configurations and flow conditions. The streamwise and transverse vibration of a circular cylinder was investigated at high Reynolds number flow. The effect of aspect ratio and taper ratio of a cantilevered cylinder was also investigated. The random oscillation characteristics were studied at high Reynolds number turbulent flow. The scope of application of this guideline was expanded by these studies to the wider range of flow condition and the practical shape of cylinders in the plants. (author)

  10. RNA Secondary Structure Prediction by Using Discrete Mathematics: An Interdisciplinary Research Experience for Undergraduate Students

    Science.gov (United States)

    Ellington, Roni; Wachira, James

    2010-01-01

    The focus of this Research Experience for Undergraduates (REU) project was on RNA secondary structure prediction by using a lattice walk approach. The lattice walk approach is a combinatorial and computational biology method used to enumerate possible secondary structures and predict RNA secondary structure from RNA sequences. The method uses discrete mathematical techniques and identifies specified base pairs as parameters. The goal of the REU was to introduce upper-level undergraduate students to the principles and challenges of interdisciplinary research in molecular biology and discrete mathematics. At the beginning of the project, students from the biology and mathematics departments of a mid-sized university received instruction on the role of secondary structure in the function of eukaryotic RNAs and RNA viruses, RNA related to combinatorics, and the National Center for Biotechnology Information resources. The student research projects focused on RNA secondary structure prediction on a regulatory region of the yellow fever virus RNA genome and on an untranslated region of an mRNA of a gene associated with the neurological disorder epilepsy. At the end of the project, the REU students gave poster and oral presentations, and they submitted written final project reports to the program director. The outcome of the REU was that the students gained transferable knowledge and skills in bioinformatics and an awareness of the applications of discrete mathematics to biological research problems. PMID:20810968

  11. RNA secondary structure prediction by using discrete mathematics: an interdisciplinary research experience for undergraduate students.

    Science.gov (United States)

    Ellington, Roni; Wachira, James; Nkwanta, Asamoah

    2010-01-01

    The focus of this Research Experience for Undergraduates (REU) project was on RNA secondary structure prediction by using a lattice walk approach. The lattice walk approach is a combinatorial and computational biology method used to enumerate possible secondary structures and predict RNA secondary structure from RNA sequences. The method uses discrete mathematical techniques and identifies specified base pairs as parameters. The goal of the REU was to introduce upper-level undergraduate students to the principles and challenges of interdisciplinary research in molecular biology and discrete mathematics. At the beginning of the project, students from the biology and mathematics departments of a mid-sized university received instruction on the role of secondary structure in the function of eukaryotic RNAs and RNA viruses, RNA related to combinatorics, and the National Center for Biotechnology Information resources. The student research projects focused on RNA secondary structure prediction on a regulatory region of the yellow fever virus RNA genome and on an untranslated region of an mRNA of a gene associated with the neurological disorder epilepsy. At the end of the project, the REU students gave poster and oral presentations, and they submitted written final project reports to the program director. The outcome of the REU was that the students gained transferable knowledge and skills in bioinformatics and an awareness of the applications of discrete mathematics to biological research problems.

  12. Fluorescent eosin probe in investigations of structural changes in glycated proteins

    Science.gov (United States)

    Pravdin, A. B.; Kochubey, V. I.; Mel'Nikov, A. G.

    2010-08-01

    The possibility of using the luminescent-kinetic probe method to investigate structural changes in bovine serum albumin (BSA) upon nonenzymatic thermal glycation is studied. An increase in the glycation time lead to a decrease in the intensity of the probe (eosin) fluorescence and to a long-wavelength shift of its maximum, as well as to an increase in the eosin phosphorescence intensity, which indicates that eosin binds to hydrophobic regions of protein at any times of incubation of BSA with glucose. From a decrease in the rate constant of the triplet-triplet energy transfer between the donor (eosin) and acceptor (anthracene) bound to proteins, it is found that the changes observed in the spectral characteristics of eosin are caused by structural changes in albumin globules as a result of glycosylation.

  13. Metallographic and autoradiographic investigation of the structure of centrifugally cast steel

    International Nuclear Information System (INIS)

    Singh, K.N.; Krishna Rao, P.

    1981-01-01

    Metallographic and autoradiographic investigations were carried out on the structure of steel tubes cast in a horizontal axis centrifugal casting machine. In chill castings the chill and columnar zones showed significantly lower sulphur contents than the equiaxed zone. Mould rotational speed was found to have an important influence on sulphur segregation. Sulphur-depleted bands, which were often observed in the castings were found to arise due to minor variations in the mould rotational speed. (auth.)

  14. Investigation of structural materials of reactors using high-energy heavy-ion irradiations

    International Nuclear Information System (INIS)

    Wang Zhiguang

    2007-01-01

    Radiation damage in structural materials of fission/fusion reactors is mainly attributed to the evolution of intensive atom displacement damage induced by energetic particles (n, α and/or fission fragments) and high-rate helium doping by direct α particle bombardments and/or (n, α) reactions. It can cause severe degradation of reactor structural materials such as surface blistering, bulk void swelling, deformation, fatigue, embrittlement, stress erosion corrosion and so on that will significantly affect the operation safety of reactors. However, up to now, behavior of structural materials at the end of their service can hardly be fully tested in a real reactor. In the present work, damage process in reactor structural materials is briefly introduced, then the advantages of energetic ion implantation/irradiation especially high-energy heavy ion irradiation are discussed, and several typical examples on simulation of radiation effects in reactor candidate structural materials using high-energy heavy ion irradiations are pronounced. Experimental results and theoretical analysis suggested that irradiation with energetic particles especially high-energy heavy ions is very useful technique for simulating the evolution of microstructures and macro-properties of reactor structural materials. Furthermore, an on-going plan of material irradiation experiments using high energy H- and He-ions based on the Heavy Ion Research Facilities in Lanzhou (HIRFL) is also briefly interpreted. (authors)

  15. Probabilistic design of nuclear structures: a summary of state of the art and research needs

    International Nuclear Information System (INIS)

    Ravindra, M.K.; Walser, A.

    1978-01-01

    This paper provides an overview of ongoing research in probabilistic design of nuclear structures. The main areas of review are (1) loads, (2) load combinations, (3) missiles, (4) design criteria, (5) seismic safety, (6) system reliability, (7) hazard analysis, and (8) probabilistic response. A consistent framework of probabilistic design of nuclear structures is proposed. Areas of further research and data collection are suggested. (Auth.)

  16. Giddens’ Triad in Accounting Research

    OpenAIRE

    Edson Roberto Macohon; Carlos Eduardo Facin Lavarda

    2015-01-01

    To understand how the theory of Structuration has been investigated in Accounting, the objective was to analyze Giddens’ Triad in accounting research. Studies in the framework of the theory of Structuration (TS) were triangulated. The structural dimension of signification was conceived from a perceptive perspective, that is, when cognitive schemes are used to interpret the reality. Nevertheless, in the accounting information context, Accounting cannot be considered a monolithic tool to interp...

  17. Investigating dynamical information transfer in the brain following a TMS pulse: Insights from structural architecture.

    Science.gov (United States)

    Amico, Enrico; Van Mierlo, Pieter; Marinazzo, Daniele; Laureys, Steven

    2015-01-01

    Transcranial magnetic stimulation (TMS) has been used for more than 20 years to investigate connectivity and plasticity in the human cortex. By combining TMS with high-density electroencephalography (hd-EEG), one can stimulate any cortical area and measure the effects produced by this perturbation in the rest of the cerebral cortex. The purpose of this paper is to investigate changes of information flow in the brain after TMS from a functional and structural perspective, using multimodal modeling of source reconstructed TMS/hd-EEG recordings and DTI tractography. We prove how brain dynamics induced by TMS is constrained and driven by its structure, at different spatial and temporal scales, especially when considering cross-frequency interactions. These results shed light on the function-structure organization of the brain network at the global level, and on the huge variety of information contained in it.

  18. Self-locking degree-4 vertex origami structures.

    Science.gov (United States)

    Fang, Hongbin; Li, Suyi; Wang, K W

    2016-11-01

    A generic degree-4 vertex (4-vertex) origami possesses one continuous degree-of-freedom for rigid folding, and this folding process can be stopped when two of its facets bind together. Such facet-binding will induce self-locking so that the overall structure stays at a pre-specified configuration without additional locking elements or actuators. Self-locking offers many promising properties, such as programmable deformation ranges and piecewise stiffness jumps, that could significantly advance many adaptive structural systems. However, despite its excellent potential, the origami self-locking features have not been well studied, understood, and used. To advance the state of the art, this research conducts a comprehensive investigation on the principles of achieving and harnessing self-locking in 4-vertex origami structures. Especially, for the first time, this study expands the 4-vertex structure construction from single-component to dual-component designs and investigates their self-locking behaviours. By exploiting various tessellation designs, this research discovers that the dual-component designs offer the origami structures with extraordinary attributes that the single-component structures do not have, which include the existence of flat-folded locking planes, programmable locking points and deformability. Finally, proof-of-concept experiments investigate how self-locking can effectively induce piecewise stiffness jumps. The results of this research provide new scientific knowledge and a systematic framework for the design, analysis and utilization of self-locking origami structures for many potential engineering applications.

  19. Research Status on Reinforcement Connection Form of Precast Concrete Shear Wall Structure

    Science.gov (United States)

    Zhang, Zhuangnan; Zhang, Yan

    2018-03-01

    With the rapid development of Chinese economy and the speeding up the process of urbanization, housing industrialization has been paid more and more attention. And the fabricated structure has been widely used in China. The key of precast concrete shear wall structure is the connection of precast components. The reinforcement connection can directly affect the entirety performance and seismic behavior of the structure. Different reinforcement connections have a great impact on the overall behavior of the structure. By studying the characteristics of the reinforcement connection forms used in the vertical connection and horizontal connection of precast concrete shear wall, it can provide reference for the research and development of the reinforcement connection forms in the future.

  20. Structured Observation of School Administrator Work Activities: Methodological Limitations and Recommendations for Research, Part II.

    Science.gov (United States)

    Pitner, Nancy J.; Russell, James S.

    1986-01-01

    This paper critically reviews administrator work activity studies which follow the research of Henry Mintzberg. It discusses directions for future research using qualitative and quantitative methods and discourages research that relies solely on Mintzberg's structure. (Author/JAZ)

  1. Investigating the structure of a vortex flow in the closed polygonal containers

    Science.gov (United States)

    Podolskaya, I. Yu; Bakakin, G. V.; Naumov, I. V.

    2018-03-01

    The structure of confined vortex flow generated by a rotating lid in a closed container with polygonal cross-section geometry (eight, six and five angles) has been investigated numerically for different height/radius aspect ratios h from 3.0 to 4.5 and for Reynold numbers ranging from 1500 to 3000. The critical Reynolds numbers at which the flow becomes unsteady were determined numerically by STAR-CCM+ computational fluid dynamics software for pentagonal and hexagonal cross-section configurations. The obtained results were compared with the flow structure in the closed cylindrical container. The boundary of a nonstationarity in polygonal containers is found to shift to the region of smaller aspect ratio and smaller Reynolds numbers with a decrease in the number of angles in the cross-section of the container relative to the boundary in a cylindrical container. It is additionally established that the structure of the flow in the near-axis region remains similar to the vortex structure in the cylinder, therefore the shape of the container does not influence the near-axis region.

  2. Ground penetrating radar measurements at the ONKALO research tunnel and eastern part of the Olkiluoto investigation area at July 2006

    International Nuclear Information System (INIS)

    Sipola, V.; Tarvainen, A.-M.

    2007-04-01

    Ground Penetrating Radar (GPR) measurements were carried out at ONKALO research site in summer 2006. Measurements included 400 metres of measurements inside ONKALO access tunnel and about 1800 metres of measurements on the ground, at the eastern parts of Olkiluoto investigation area. The purpose of the measurements done inside the access tunnel was to investigate, whether it would be possible to locate deformation structures or long fractures in the rock mass below the tunnel. The purpose of the measurements made on top of the ground was to investigate, whether it would be possible to locate glacio-isostatic faults from the soils. A secondary target was to try and locate the rock surface. The chosen part of ONKALO tunnel was measured using five different frequencies, which enabled comparing the results to each other. It also enabled getting a higher resolution picture of the top rock, than what would have been possible using only one low-frequency antenna. The on-the-ground measurements were measured using only one frequency. (orig.)

  3. Cooperative Research and Development Agreement Final Report for Cooperative Research and Development Agreement Number ORNL93-0237 Adhesive Bonding Technologies for Automotive Structural Composites; TOPICAL

    International Nuclear Information System (INIS)

    Boeman, R.G.

    2001-01-01

    In 1993, the Oak Ridge National Laboratory (ORNL) entered into a Cooperative Research and Development Agreement (CRADA) with the Automotive Composites Consortium (ACC) to conduct research and development that would overcome technological hurdles to the adhesive bonding of current and future automotive materials. This effort is part of a larger Department of Energy (DOE) program to promote the use of lighter weight materials in automotive structures for the purpose of increasing fuel efficiency and reducing environmental pollutant emissions. In accomplishing this mission, the bonding of similar and dissimilar materials was identified as being of primary importance to the automotive industry since this enabling technology would give designers the freedom to choose from an expanded menu of low mass materials for component weight reduction. The research undertaken under this CRADA addresses the following areas of importance: bulk material characterization, structural fracture mechanics, modeling/characterization, process control and nondestructive evaluation (PC/NDE), manufacturing demonstration, and advanced processing. For the bulk material characterization task, the individual material properties of the adherends and adhesives were characterized. This included generating a database of mechanical and physical properties, after identifying and developing standard test methods to obtain properties. The structural fracture mechanics task concentrated on test development to characterize the fracture toughness of adhesively bonded joints subjected to Mode I, Mode II and mixed-mode conditions. Standard test procedures for quantifying an adhesive/adherend system's resistance to crack growth were developed for use by industry. In the modeling/characterization task, fracture mechanics-based design guidelines and predictive methodologies have been developed which will facilitate iteration on design concepts for bonded joints while alleviating the need for extensive testing

  4. Knowledge sharing through social media: Investigating trends and technologies in a global marketing and advertising research company

    Directory of Open Access Journals (Sweden)

    Dina Adamovic

    2012-07-01

    Objective: The objective of this study was to investigate trends in knowledge-sharing technologies in Nielsen. Method: The researchers distributed semi-structured questionnaires to a sample of employees in Nielsen’s Television Audience Measurement Department. They also conducted interviews with specific employees in this department to gain a better understanding of employees’ attitudes toward, and perceptions of, the use of social media tools for creating a knowledgesharing culture at Nielsen. The researchers validated the data to see whether it could support the research and used triangulation to create a holistic view of the data they received from the questionnaires. Results: The findings of the study revealed that respondents had a positive attitude to sharing knowledge with one another through using social media tools. However, some respondents thought that technology, in general, was ‘the tree of good and evil’. The survey findings showed that Nielsen did have social media tools. However, not all employees were aware of these tools or were willing to use the tools to share knowledge. This study highlighted the possible advantages of the social media for sharing knowledge and how Nielsen could use the tools more widely. Conclusion: In order for a knowledge sharing culture to thrive at Nielsen, its employees need to engage more with social media tools in their business practices.

  5. Theoretical Investigation of Subwavelength Gratings and Vertical Cavity Lasers Employing Grating Structures

    DEFF Research Database (Denmark)

    Taghizadeh, Alireza

    This thesis deals with theoretical investigations of a newly proposed grating structure, referred to as hybrid grating (HG) as well as vertical cavity lasers based on the grating reflectors. The HG consists of a near-subwavelength grating layer and an unpatterned high-refractive-index cap layer...... directions, which is analogous to electronic quantum wells in conduction or valence bands. Several interesting configurations of heterostructures have been investigated and their potential in fundamental physics study and applications are discussed. For numerical and theoretical studies, a three...... feasibility than the HCG-based ones. Furthermore, the concept of cavity dispersion in vertical cavities is introduced and its importance in the modal properties is numerically investigated. The dispersion curvature of a cavity mode is interpreted as the effective photon mass of the cavity mode. In a vertical...

  6. The magnetic structure of GdNi2B2C investigated by neutron powder diffraction

    International Nuclear Information System (INIS)

    Barcza, A.; Rotter, M.; Doerr, M.; Beuneu, B.

    2005-01-01

    Full text: The group of ReT 2 B 2 C (Re=rare earth, T=transition metal) shows a very interesting interplay between magnetism and superconductivity due to the rare earth metals. In this work the magnetism of GdNi 2 B 2 C was studied with neutron diffraction. Previous investigations with x-ray diffraction methods have determined the crystal structure as a body centered tetragonal structure (I 4/mmm). Hot neutrons were used for the diffraction experiment, because the absorption cross section of Gd is significantly smaller for short wavelengths. The investigated compound orders magnetically at TN=19.5 K, and so the experiment was carried out at two temperatures, namely 30 K and 2.2 K. The results show a incommensurate spin structure with a propagation vector of (0.55 0 0). To confirm this results additional simulations of the spin structure were done based on the Standard Model of rare earth magnetism. A neutron diffraction pattern was calculated using the McPhase program package and is compared to the experimental data. (author)

  7. Adsorption of s-triazines onto polybenzimidazole: A quantitative structure-property relationship investigation

    Energy Technology Data Exchange (ETDEWEB)

    D' Archivio, Angelo Antonio, E-mail: angeloantonio.darchivio@univaq.it [Dipartimento di Chimica, Ingegneria Chimica e Materiali, Universita degli Studi dell' Aquila, Via Vetoio, 67010 Coppito, L' Aquila (Italy); Incani, Angela; Mazzeo, Pietro; Ruggieri, Fabrizio [Dipartimento di Chimica, Ingegneria Chimica e Materiali, Universita degli Studi dell' Aquila, Via Vetoio, 67010 Coppito, L' Aquila (Italy)

    2009-09-21

    The adsorption of 25 symmetric triazines (s-triazines) on polybenzimidazole (PBI) beads is investigated under equilibrium (batch) conditions. The observed adsorption isotherms of the selected compounds are accurately described by the Freundlich model, while the agreement between the Langmuir model and the experimental data is moderately worse, which seems to reflect the heterogeneous meso- and micro-porosity of PBI and polydispersion in the interaction mechanism. Methylthio- and methoxytriazines exhibit a greater adsorption tendency as compared with chlorotriazines, moreover, progressive dealkylation of amino groups results in a progressive increase of triazine uptake on PBI. Based on these evidences, the adsorption mechanism seems to be governed by a combination of {pi}-{pi} and hydrogen-bonding interactions. Genetic algorithm (GA) variable selection and multilinear regression (MLR) are combined in order to describe the effect of triazine structure on the extraction performance of PBI according to the quantitative structure-property relationship (QSPR) method. q{sub max}, the amount of triazine adsorbed per weight unit of PBI assuming homogeneous monolayer (Langmuir) mechanism, exhibits a great variability within the set of investigated triazines and is the quantity here modelled by QSPR. On the other hand, the Freundlich constant, K{sub F}, which expresses the adsorption efficiency under multilayer heterogeneous conditions, even if markedly increases passing from chloro- to methylthio- or methoxytriazines, is less noticeably affected by the fine details of the adsorbate structure, as the number or nature of alkyl fragments bound to the amino groups. To quantitatively relate q{sub max} with the triazine structure GA-MLR analysis is performed on the set of 1664 theoretical molecular descriptors provided by the software Dragon. Finally, a four-dimensional QSPR model is selected based on leave-one-out cross-validation and its prediction ability is further tested on

  8. Adsorption of s-triazines onto polybenzimidazole: A quantitative structure-property relationship investigation

    International Nuclear Information System (INIS)

    D'Archivio, Angelo Antonio; Incani, Angela; Mazzeo, Pietro; Ruggieri, Fabrizio

    2009-01-01

    The adsorption of 25 symmetric triazines (s-triazines) on polybenzimidazole (PBI) beads is investigated under equilibrium (batch) conditions. The observed adsorption isotherms of the selected compounds are accurately described by the Freundlich model, while the agreement between the Langmuir model and the experimental data is moderately worse, which seems to reflect the heterogeneous meso- and micro-porosity of PBI and polydispersion in the interaction mechanism. Methylthio- and methoxytriazines exhibit a greater adsorption tendency as compared with chlorotriazines, moreover, progressive dealkylation of amino groups results in a progressive increase of triazine uptake on PBI. Based on these evidences, the adsorption mechanism seems to be governed by a combination of π-π and hydrogen-bonding interactions. Genetic algorithm (GA) variable selection and multilinear regression (MLR) are combined in order to describe the effect of triazine structure on the extraction performance of PBI according to the quantitative structure-property relationship (QSPR) method. q max , the amount of triazine adsorbed per weight unit of PBI assuming homogeneous monolayer (Langmuir) mechanism, exhibits a great variability within the set of investigated triazines and is the quantity here modelled by QSPR. On the other hand, the Freundlich constant, K F , which expresses the adsorption efficiency under multilayer heterogeneous conditions, even if markedly increases passing from chloro- to methylthio- or methoxytriazines, is less noticeably affected by the fine details of the adsorbate structure, as the number or nature of alkyl fragments bound to the amino groups. To quantitatively relate q max with the triazine structure GA-MLR analysis is performed on the set of 1664 theoretical molecular descriptors provided by the software Dragon. Finally, a four-dimensional QSPR model is selected based on leave-one-out cross-validation and its prediction ability is further tested on four

  9. Perspectives of Community Co-Researchers About Group Dynamics and Equitable Partnership Within a Community-Academic Research Team.

    Science.gov (United States)

    Vaughn, Lisa M; Jacquez, Farrah; Zhen-Duan, Jenny

    2018-04-01

    Equitable partnership processes and group dynamics, including individual, relational, and structural factors, have been identified as key ingredients to successful community-based participatory research partnerships. The purpose of this qualitative study was to investigate the key aspects of group dynamics and partnership from the perspectives of community members serving as co-researchers. Semistructured, in-depth interviews were conducted with 15 Latino immigrant co-researchers from an intervention project with Latinos Unidos por la Salud (LU-Salud), a community research team composed of Latino immigrant community members and academic investigators working in a health research partnership. A deductive framework approach guided the interview process and qualitative data analysis. The LU-Salud co-researchers described relationships, personal growth, beliefs/identity motivation (individual dynamics), coexistence (relational dynamics), diversity, and power/resource sharing (structural dynamics) as key foundational aspects of the community-academic partnership. Building on existing CBPR and team science frameworks, these findings demonstrate that group dynamics and partnership processes are fundamental drivers of individual-level motivation and meaning making, which ultimately sustain efforts of community partners to engage with the research team and also contribute to the achievement of intended research outcomes.

  10. Facet Theory and the Mapping Sentence As Hermeneutically Consistent Structured Meta-Ontology and Structured Meta-Mereology

    Science.gov (United States)

    Hackett, Paul M. W.

    2016-01-01

    When behavior is interpreted in a reliable manner (i.e., robustly across different situations and times) its explained meaning may be seen to possess hermeneutic consistency. In this essay I present an evaluation of the hermeneutic consistency that I propose may be present when the research tool known as the mapping sentence is used to create generic structural ontologies. I also claim that theoretical and empirical validity is a likely result of employing the mapping sentence in research design and interpretation. These claims are non-contentious within the realm of quantitative psychological and behavioral research. However, I extend the scope of both facet theory based research and claims for its structural utility, reliability and validity to philosophical and qualitative investigations. I assert that the hermeneutic consistency of a structural ontology is a product of a structural representation's ontological components and the mereological relationships between these ontological sub-units: the mapping sentence seminally allows for the depiction of such structure. PMID:27065932

  11. Hydrogeological characterization on surface-based investigation phase in the Mizunami underground research laboratory project, in Japan

    International Nuclear Information System (INIS)

    Saegusa, Hiromitsu; Onoe, Hironori; Takeuchi, Shinji; Takeuchi, Ryuji; Ohyama, Takuya

    2007-01-01

    The Mizunami Underground Research Laboratory (MIU) project is being carried out by Japan Atomic Energy Agency in the Cretaceous Toki granite in the Tono area, central Japan. The MIU project is a purpose-built generic underground research laboratory project that is planned for a broad scientific study of the deep geological environment as a basis of research and development for geological disposal of nuclear wastes. One of the main goals of the MIU project is to establish comprehensive techniques for investigation, analysis, and assessment of the deep geological environment. The MIU project has three overlapping phases: Surface-based Investigation (Phase I), Construction (Phase II) and Operation (Phase III). Hydrogeological investigations using a stepwise process in Phase I have been carried out in order to obtain information on important properties such as, location of water conducting features, hydraulic conductivity and so on. Hydrogeological modeling and groundwater flow simulations in Phase I have been carried out in order to synthesize these investigation results, to evaluate the uncertainty of the hydrogeological model and to identify the main issues for further investigations. Using the stepwise hydrogeological characterization approach and combining the investigation with modeling and simulation, understanding of the hydrogeological environment has been progressively improved. (authors)

  12. NASA-UVa light aerospace alloy and structures technology program

    Science.gov (United States)

    Gangloff, Richard P.; Haviland, John K.; Herakovich, Carl T.; Pilkey, Walter D.; Pindera, Marek-Jerzy; Scully, John R.; Stoner, Glenn E.; Swanson, Robert E.; Thornton, Earl A.; Wawner, Franklin E., Jr.

    1991-01-01

    The general objective of the NASA-UVa Light Aerospace Alloy and Structures Technology Program was to conduct research on the performance of next generation, light weight aerospace alloys, composites, and associated thermal gradient structures. The following research areas were actively investigated: (1) mechanical and environmental degradation mechanisms in advanced light metals and composites; (2) aerospace materials science; (3) mechanics of materials and composites for aerospace structures; and (4) thermal gradient structures.

  13. An output evaluation of a health research foundation's enhanced grant review process for new investigators.

    Science.gov (United States)

    Hammond, Gregory W; Lê, Mê-Linh; Novotny, Tannis; Caligiuri, Stephanie P B; Pierce, Grant N; Wade, John

    2017-06-19

    We assessed the ability of the Manitoba Medical Service Foundation (MMSF, a small not-for-profit foundation affiliated with Manitoba Blue Cross) to determine the best candidates for selection to receive research funding support among new researchers applying to the Research Operating Grants Programme (ROGP). Using bibliometric and grants funding analyses, we retrospectively compared indices of academic outputs from five cohorts of MMSF-funded and not MMSF-funded applicants to the annual MMSF ROGP over 2008 to 2012, from 1 to 5 years after having received evaluation decisions from the MMSF enhanced grant review process. Those researchers funded by the MMSF competition (MMSF-funded) had a statistically significant greater number of publications, a higher h-index and greater national Tri-Council (TC) funding, versus those not selected for funding (not MMSF-funded). MMSF-funded applicants and the Manitoba research community have created a strong and rapid (within 1 to 5 years of receiving the MMSF grant) local economic return on investment associated with the MMSF ROGP that supports new investigators, of approximately nine-fold for TC grants by the principal investigator, and of 34-fold for the principal investigator on collaborative (total) TC grants. The use of small amounts of seed money for competitive research grants at early stages of an MMSF-funded applicant's career correlates with future short-term success of that applicant. The ability to correctly select promising candidates who subsequently demonstrate greater academic performance after the MMSF funding shows the selection process and the ROGP to be of merit. Multiple components may have contributed to this outcome, including a direct presentation and interview process of the candidate with five-person selection subcommittees, plus an assessment by an external reviewer (the enhanced grant review process). The selection methods used here may add value to the research grant selection processes of new

  14. A Methodological Review of Structural Equation Modelling in Higher Education Research

    Science.gov (United States)

    Green, Teegan

    2016-01-01

    Despite increases in the number of articles published in higher education journals using structural equation modelling (SEM), research addressing their statistical sufficiency, methodological appropriateness and quantitative rigour is sparse. In response, this article provides a census of all covariance-based SEM articles published up until 2013…

  15. Research Progress of the Gravity Field Application in Earth's Geodynamics and Interior Structure

    Directory of Open Access Journals (Sweden)

    SUN Heping

    2017-10-01

    Full Text Available The exploration of deep internal structure and internal dynamics of the earth has always been a hot topic in the field of basic geoscience research.Traditional approach relies mainly on seismic technology. However, in recent decades, the innovation of modern gravity observation technology (especially the successful application of high-precision superconducting gravity technology makes it possible to detect the earth's internal dynamics and physical information. In this paper, we summarize the research progress of Chinese group in detecting the earth's free oscillation, free core nutation, inner core translational oscillation, tidal model and polar tide and the internal structure by using modern high-precision gravity technology in recent years.

  16. Seismic tomography investigation of the Down Ampney fault research site

    International Nuclear Information System (INIS)

    Jackson, P.D.; Greenwood, P.G.; Raines, M.G.; Rainsbury, M.P.

    1991-01-01

    High resolution tomographic cross-hole seismic surveys have been designed and undertaken for fault characterisation in mudrocks at a higher resolution than is currently used in site investigations. Compressional waves were generated at a frequency of 1.04 kHz and a wavelength of 1.6 m in the formation, and were used to tomographically image a normally faulted clay sequence (Oxford Clay and Kellaways Beds) overlying limestone. The fault plane and lithologies are clearly visible in the tomograms, a 10% difference in velocity between the Oxford Clay and Kellaways Beds, being particularly prominent. A zone of 5% lower ''tomographic - velocity'' was observed to correspond with the fault zone within the Oxford Clay (as predicted from the geological logging of the core) which indicates substantial alteration that could be fluid affected. Geological constraints were found to be a crucial imput to the tomographic inversion, and examples show erroneous results that can arise. Seismic attenuation was very low (reflection observed from 80 m depth) and larger ranges could have been used to investigate larger scale geological structures. (author)

  17. Structural Investigation of Sodium Layered Oxides Via in Situ Synchrotron X-Ray Diffraction

    DEFF Research Database (Denmark)

    Jung, Young Hwa; Christiansen, Ane Sælland; Johnsen, Rune

    2015-01-01

    electrochemical reaction is generally considered to be a pivotal feature for understanding the relationship between layered structures and electrochemical properties. Here the structure, phase stability, and electrochemical properties of two kinds of layered oxides, P2 and O3, are investigated through in......-situ synchrotron XRD experiments. A capillary Na-based cell is designed to minimize interference in other substances such as a separator or external battery parts. This approach could give us to obtain clear diffraction patterns with high intensity during electrochemical reaction in a short period of time without...... further relaxation step. We carefully scrutinized reversible structural phase transformations during electrochemical reaction of P2 and O3-layered compounds based on in situ analysis, and detailed results will be discussed....

  18. First-principles investigations on structural, elastic and mechanical properties of BNxAs1‑x ternary alloys

    Science.gov (United States)

    Zhang, Junqin; Ma, Huihui; Zhao, Bin; Wei, Qun; Yang, Yintang

    2018-05-01

    A systematic investigation of the structural optimization, elastic and mechanical properties of the BNxAs1‑x ternary alloys are reported in the present work using the density-functional theory with the generalized gradient approximation (GGA) of the exchange-correlation functional. Some of the constants which are used to analyze the properties including elastic constants and modulus, and some parameters describing the elastic anisotropy and Debye temperature are also calculated. Our calculations were performed to evaluate the equilibrium lattice constant and band structure compared with the available theoretical works. On the one hand, our results might be expected to provide a theoretical basis for future study of BNxAs1‑x alloys towards elastic or mechanical properties. On the other hand, we draw a conclusion that BNxAs1‑x alloys show direct bandgap when x equals 0.25, 0.5 or 0.75. We obtained the elastic modulus, Poisson’s ratio and universal anisotropic index which are used to demonstrate the elastic anisotropy of these alloys which is proved according to our calculations. Also, we calculated the Debye temperature to illustrate covalent interactions and obtained the lower limit of the thermal conductivity for further research.

  19. Investigation into the value of the seismic methods in delineating structure in southwestern Ontario

    Energy Technology Data Exchange (ETDEWEB)

    Hodgson, J H

    1948-12-31

    This paper constitutes the final report on a project that investigated the possibilities of seismic methods to delineate Palaeozoic structures in areas of hydrocarbon exploration in south-western Ontario. It begins with an introduction on the theory and practice of seismic reflection prospecting and the general Palaeozoic geology of the study area. It then describes the equipment used, preliminary investigations (alignment of instruments, velocity determinations), and field tests conducted over various hydrocarbon prospects. Finally, the feasibility of using seismic methods in the area is discussed along with reasons for difficulties experienced in the investigation.

  20. Investigation of ferromagnetic resonance and magnetoresistance in anti-spin ice structures

    Science.gov (United States)

    Ribeiro, I. R. B.; Felix, J. F.; Figueiredo, L. C.; Morais, P. C.; Ferreira, S. O.; Moura-Melo, W. A.; Pereira, A. R.; Quindeau, A.; de Araujo, C. I. L.

    2016-11-01

    In this work, we report experimental and theoretical investigations performed in anti-spin ice structures, composed by square lattice of elongated antidots, patterned in nickel thin film. The magnetic vortex crystal state was obtained by micromagnetic simulation as the ground state magnetization, which arises due to the magnetic stray field at the antidot edges inducing chirality in the magnetization of platters among antidots. Ferromagnetic resonance (FMR) and magnetoresistance (MR) measurements were utilized to investigate the vortex crystal magnetization dynamics and magnetoelectric response. By using FMR, it was possible to detect the spin wave modes and vortex crystal resonance, in good agreement with dynamic micromagnetic simulation results. The vortex crystal magnetization configuration and its response to the external magnetic field, were used to explain the isotropic MR behaviour observed.

  1. EPRI's on-site soil-structure interaction research and its application to design/analysis verification

    Energy Technology Data Exchange (ETDEWEB)

    Stepp, J C; Tang, H T [Seismic Center, Electric Power Research Institute, Palo Alto, CA (United States)

    1988-07-01

    Soil structure, interaction (SSI) research at the Electric Power Research Institute (EPRI) is focused on validating modeling and computational procedures. A data base has been obtained with instrumented scale models of stiff structures founded both on unsaturated alluvial soils and on rock. Explosives were used to induce strong ground-motion for two experiments, one on rock and the other on alluvium. A third experiment, a one-fourth scale containment structure on saturated alluvium, relies on earthquakes as the energy source. Analysis of the explosion-induced SSI data shows a marked shift in the fundamental frequency of the soil-structure system to a lower frequency. The magnitude of the shift is a function of foundation conditions and level of excitation. Analytical simulation was found to require more sophisticated soil constitutive models and computer codes than are used in current practice. The current phase of the program concentrates on evaluating SSI models used in current design practice by comparing predicted with recorded data at points in the soil-structure system. (author)

  2. EPRI's on-site soil-structure interaction research and its application to design/analysis verification

    International Nuclear Information System (INIS)

    Stepp, J.C.; Tang, H.T.

    1988-01-01

    Soil structure, interaction (SSI) research at the Electric Power Research Institute (EPRI) is focused on validating modeling and computational procedures. A data base has been obtained with instrumented scale models of stiff structures founded both on unsaturated alluvial soils and on rock. Explosives were used to induce strong ground-motion for two experiments, one on rock and the other on alluvium. A third experiment, a one-fourth scale containment structure on saturated alluvium, relies on earthquakes as the energy source. Analysis of the explosion-induced SSI data shows a marked shift in the fundamental frequency of the soil-structure system to a lower frequency. The magnitude of the shift is a function of foundation conditions and level of excitation. Analytical simulation was found to require more sophisticated soil constitutive models and computer codes than are used in current practice. The current phase of the program concentrates on evaluating SSI models used in current design practice by comparing predicted with recorded data at points in the soil-structure system. (author)

  3. An experimental investigation of recruitment bias in eating pathology research.

    Science.gov (United States)

    Moss, Erin L; von Ranson, Kristin M

    2006-04-01

    Previous, uncontrolled research has suggested a bias may exist in recruiting participants for eating disorder research. Recruitment biases may affect sample representativeness and generalizability of findings. This experiment investigated whether revealing that a study's topic was related to eating disorders created a self-selection bias. Young women at a university responded to advertisements containing contrasting information about the nature of a single study. We recruited one group by advertising the study under the title "Disordered Eating in Young Women" (n = 251) and another group using the title "Consumer Preferences" (n = 259). Results indicated similar levels of eating pathology in both groups, so the different recruitment techniques did not engender self-selection. However, the consumer preferences group scored higher in self-reported social desirability. The level of information conveyed in study advertising does not impact reporting of eating disturbances among nonclinical samples, although there is evidence social desirability might. 2006 by Wiley Periodicals, Inc.

  4. Structural investigations of zirconia powders obtained by hf-plasmochemical denitration

    International Nuclear Information System (INIS)

    Dedov, N.V.; Ivanov, Yu.F.; Dorda, F.A.; Paul', A.V.; Zav'yalov, A.V.; Koneva, N.A.; Korobtsev, V.P.; Kutyavin, E.M.; Mazin, V.I.; Matyukha, V.A.

    1992-01-01

    Results are presented of structural and physicochemical investigations of unstabilized and stabilized (using yttria, magnesia, calcium oxide and alumina) zirconia, obtained from nitrate solutions on pilot HF-plasmochemical equipment with an electric rating of 63 kW. The phase composition of the ultradispersed powder is shown. Morphological and grain-size analyses were carried out on the EM-125K electron diffraction microscope. specimens were prepared by applying powder to a carbon film obtained in a VUP-4 vacuum cell. The phase composition was studied by x-ray analysis on the DRON-3 diffractometer. These studies established that the main morphological constituents of the ZrO 2 powder are polycrystalline hollow spheres and fragments of films. The average sizes (diameter) of the spheres in 0.77 μ (mean square deviation σ n = 0.57μ) and for the grains in them 31 nm (σ n = 9.5 nm). There exists a certain correlation between the dimensions of the polycrystalline spheres and their grain structure - the coarser the powders, the larger the grains observed

  5. Structural investigations of neuromelanin by pyrolysis-gas chromatography/mass spectrometry

    International Nuclear Information System (INIS)

    Dzierzega-Lecznar, A.; Kurkiewicz, S.; Stepien, K.; Chodurek, E.; Riederer, P.; Gerlach, M.

    2006-01-01

    Pyrolysis combined with gas chromatography and mass spectrometry (Py-GC/MS) was applied for structural investigations of the human substantia nigra neuromelanin. Using synthetic neuromelanins, we have demonstrated that Py-GC/MS is suitable for identification and differentiation of both eumelanin (dopamine-derived) and pheomelanin (cysteinyldopamine-derived) component of the pigment. Structural information on melanin monomers was inferred from their pyrolytic markers. When the human neuromelanin was subjected to pyrolysis, none of the heterocyclic, sulfur-containing markers of pheomelanin component was detected among the thermal degradation products. We have concluded that nigral pigment isolated from normal brain tissue does not contain benzothiazine-type monomers, and that cysteinyldopamine-originated units may be incorporated into the polymer in uncyclized form. The most abundant pyrolysis product was identified as limonene, which indicates that nigral pigment is tightly associated with an isoprenoid-type compound. Pyrolysis in the presence of the methylating reagent allowed identification of high levels of saturated and monounsaturated straight-chain C14-C18 fatty acid species chemically bound to the pigment macromolecule. (author)

  6. The FP4026 Research Database on the fundamental period of RC infilled frame structures.

    Science.gov (United States)

    Asteris, Panagiotis G

    2016-12-01

    The fundamental period of vibration appears to be one of the most critical parameters for the seismic design of buildings because it strongly affects the destructive impact of the seismic forces. In this article, important research data (entitled FP4026 Research Database (Fundamental Period-4026 cases of infilled frames) based on a detailed and in-depth analytical research on the fundamental period of reinforced concrete structures is presented. In particular, the values of the fundamental period which have been analytically determined are presented, taking into account the majority of the involved parameters. This database can be extremely valuable for the development of new code proposals for the estimation of the fundamental period of reinforced concrete structures fully or partially infilled with masonry walls.

  7. The FP4026 Research Database on the fundamental period of RC infilled frame structures

    Directory of Open Access Journals (Sweden)

    Panagiotis G. Asteris

    2016-12-01

    Full Text Available The fundamental period of vibration appears to be one of the most critical parameters for the seismic design of buildings because it strongly affects the destructive impact of the seismic forces. In this article, important research data (entitled FP4026 Research Database (Fundamental Period-4026 cases of infilled frames based on a detailed and in-depth analytical research on the fundamental period of reinforced concrete structures is presented. In particular, the values of the fundamental period which have been analytically determined are presented, taking into account the majority of the involved parameters. This database can be extremely valuable for the development of new code proposals for the estimation of the fundamental period of reinforced concrete structures fully or partially infilled with masonry walls.

  8. RNA Secondary Structure Prediction by Using Discrete Mathematics: An Interdisciplinary Research Experience for Undergraduate Students

    Science.gov (United States)

    Ellington, Roni; Wachira, James; Nkwanta, Asamoah

    2010-01-01

    The focus of this Research Experience for Undergraduates (REU) project was on RNA secondary structure prediction by using a lattice walk approach. The lattice walk approach is a combinatorial and computational biology method used to enumerate possible secondary structures and predict RNA secondary structure from RNA sequences. The method uses…

  9. Structural investigation of spherical hollow excipient Mannit Q by X-ray microtomography.

    Science.gov (United States)

    Kajihara, Ryusuke; Noguchi, Shuji; Iwao, Yasunori; Yasuda, Yuki; Segawa, Megumi; Itai, Shigeru

    2015-11-10

    The structure of Mannit Q particles, an excipient made by spray-drying a d-mannitol solution, and Mannit Q tablets were investigated by synchrotron X-ray microtomography. The Mannit Q particles had a spherical shape with a hollow core. The shells of the particles consisted of fine needle-shaped crystals, and columnar crystals were present in the hollows. These structural features suggested the following formation mechanism for the hollow particles:during the spray-drying process, the solvent rapidly evaporated from the droplet surface, resulting in the formation of shells made of fine needle-shaped crystals.Solvent remaining inside the shells then evaporated slowly and larger columnar crystals grew as the hollows formed. Although most of the Mannit Q particles were crushed on tableting, some of the particles retained their hollow structures, probably because the columnar crystals inside the hollows functioned as props. This demonstrated that the tablets with porous void spaces may be readily manufactured using Mannit Q. Copyright © 2015 Elsevier B.V. All rights reserved.

  10. Main factors of thermal fatigue failure induced by thermal striping and total simulation of thermal hydraulic and structural behaviors (research report)

    International Nuclear Information System (INIS)

    Kasahara, Naoto; Muramatsu, Toshiharu

    1999-01-01

    At incomplete mixing area of high temperature and low temperature fluids near the surface of structures, temperature fluctuation of fluid gives thermal fatigue damage to wall structures. This phenomenon is called thermal striping, which becomes sometimes a critical problem in LMFR plants. Since thermal striping phenomenon is characterized by the complex thermohydraulic and thermomechanical coupled problem, conventional evaluation procedures require mock-up experiments. In order to replace them by simulation-base methods, the authors have developed numerical simulation codes and applied them to analyze a tee junction of the PHENIX secondary circuit due to thermal striping phenomenon, in the framework of the IAEA coordinated research program (CRP). Through this analysis, thermohydraulic and thermomechanical mechanism of thermal striping phenomenon was clarified, and main factors on structural integrity was extracted in each stage of thermal striping phenomenon. Furthermore, simulation base evaluation methods were proposed taking above factors of structural integrity into account. Finally, R and D problems were investigated for future development of design evaluation methods. (author)

  11. Comprehension of marketing research textbooks among South African students: An investigation

    OpenAIRE

    Berndt, Adele; Petzer, Daniel; Wayland, Jane P.

    2014-01-01

    Reading is a skill people require in order to operate successfully in all spheres of life.  Mastering this skill is even more critical when pursuing academic studies. This study investigated the reading comprehension of final year undergraduate marketing students at a South African higher education institution (HEI) relating to their comprehension of marketing research textbooks. Two measurement instruments were used to test their reading comprehension. One instrument contained two passages f...

  12. A new metric method-improved structural holes researches on software networks

    Science.gov (United States)

    Li, Bo; Zhao, Hai; Cai, Wei; Li, Dazhou; Li, Hui

    2013-03-01

    The scale software systems quickly increase with the rapid development of software technologies. Hence, how to understand, measure, manage and control software structure is a great challenge for software engineering. there are also many researches on software networks metrics: C&K, MOOD, McCabe and etc, the aim of this paper is to propose a new and better method to metric software networks. The metric method structural holes are firstly introduced to in this paper, which can not directly be applied as a result of modular characteristics on software network. Hence, structural holes is redefined in this paper and improved, calculation process and results are described in detail. The results shows that the new method can better reflect bridge role of vertexes on software network and there is a significant correlation between degree and improved structural holes. At last, a hydropower simulation system is taken as an example to show validity of the new metric method.

  13. Advance of investigation of irradiation embrittlement mechanism of nuclear reactor pressure vessel steels. History and future of irradiation embrittlement researches

    International Nuclear Information System (INIS)

    Ishino, Shiori

    2007-01-01

    The nuclear reactor pressure vessel is the most important component of LWR plants required to be safe. This paper describes contents of the title consisting of four chapters. The first chapter states the general theory of irradiation effects, irradiation embrittlement and decreasing of toughness, and some kinds of pressure vessel steels. The second chapter explains history of irradiation embrittlement investigations and the advance of research methods for experiments and calculation. The third chapter contains information of inner structure of irradiated materials and development of prediction equations, recent information of embrittlement mechanism and mechanism guided prediction method, USA model and Central Research Institute of Electric Power Industry (CRIEPI) model. The fourth chapter states recent problems from viewpoints of experimental and analytical approaches. Comparison of standards of LWR pressure vessel steels between Japan and USA, relation between the density of number of cluster and the copper content, effect of flux on clustering of copper atoms, and CRIEPI's way of approaching the prediction method are illustrated. (S.Y.)

  14. Research Projects in Physics: A Mechanism for Teaching Ill-Structured Problem Solving

    Science.gov (United States)

    Milbourne, Jeff; Bennett, Jonathan

    2017-10-01

    Physics education research has a tradition of studying problem solving, exploring themes such as physical intuition and differences between expert and novice problem solvers. However, most of this work has focused on traditional, or well-structured, problems, similar to what might appear in a textbook. Less work has been done with open-ended, or ill-structured, problems, similar to the types of problems students might face in their professional lives. Given the national discourse on educational system reform aligned with 21st century skills, including problem solving, it is critical to provide educational experiences that help students learn to solve all types of problems, including ill-structured problems.

  15. Funding opportunities for clinical investigators in the early stages of career development in cardiovascular research

    OpenAIRE

    Mentz, Robert J.; Becker, Richard C.

    2013-01-01

    Contemporary cardiovascular research offers junior investigators the opportunity to explore the gamut of biomedical questions. Despite the recent reduction in the availability of funding mechanisms that have historically served as the primary pathways for investigators in the early stages of career development, there remain numerous traditional and non-traditional funding opportunities. This article highlights these opportunities in order to assist early career investigators in the developmen...

  16. Application of variable structure system theory to aircraft flight control. [AV-8A and the Augmentor Wing Jet STOL Research Aircraft

    Science.gov (United States)

    Calise, A. J.; Kadushin, I.; Kramer, F.

    1981-01-01

    The current status of research on the application of variable structure system (VSS) theory to design aircraft flight control systems is summarized. Two aircraft types are currently being investigated: the Augmentor Wing Jet STOL Research Aircraft (AWJSRA), and AV-8A Harrier. The AWJSRA design considers automatic control of longitudinal dynamics during the landing phase. The main task for the AWJSRA is to design an automatic landing system that captures and tracks a localizer beam. The control task for the AV-8A is to track velocity commands in a hovering flight configuration. Much effort was devoted to developing computer programs that are needed to carry out VSS design in a multivariable frame work, and in becoming familiar with the dynamics and control problems associated with the aircraft types under investigation. Numerous VSS design schemes were explored, particularly for the AWJSRA. The approaches that appear best suited for these aircraft types are presented. Examples are given of the numerical results currently being generated.

  17. Structural equation model to investigate the dimensions influencing safety culture improvement in construction sector: A case in Indonesia

    Science.gov (United States)

    Machfudiyanto, Rossy Armyn; Latief, Yusuf; Yogiswara, Yoko; Setiawan, R. Mahendra Fitra

    2017-06-01

    In facing the ASEAN Economic Community, the level of prevailing working accidents becomes one of the competitiveness factors among the companies. A construction industry is one of the industries prone to high level of accidents. Improving the safety record will not be completely effective unless the occupational safety and healthy culture is enhanced. The aim of this research was to develop a model and to conduct empirical investigation on the relationships among the dimensions of construction occupational safety culture. This research used the structural equation model as a means to examine the hypothesis of positive relationships between dimensions and objectives. The method used in this research was questionnaire survey which was distributed to the respondents from construction companies in a state-owned enterprise in Indonesia. Moreover, there were dimensions of occupational safety culture that was established, such as leadership, behavior, value, strategy, policy, process, employee, safety cost, and contract system. The results of this study indicated that all dimensions were significant and inter-related in forming the safety culture. The result of R2 yielded the safety performance was 54%, which means it was in low category and evaluation of policies on construction companies was required in addressing the issue of working accidents.

  18. Fine- and hyperfine structure investigations of the even-parity configuration system of the atomic holmium

    Science.gov (United States)

    Stefanska, D.; Ruczkowski, J.; Elantkowska, M.; Furmann, B.

    2018-04-01

    In this work new experimental results concerning the hyperfine structure (hfs) for the even-parity level system of the holmium atom (Ho I) were obtained; additionally, hfs data obtained recently as a by-product in investigations of the odd-parity level system were summarized. In the present work the values of the magnetic dipole and the electric quadrupole hfs constants A and B were determined for 24 even-parity levels, for 14 of them for the first time. On the basis of these results, as well as on available literature data, a parametric study of the fine structure and the hyperfine structure for the even-parity configurations of atomic holmium was performed. A multi-configuration fit of 7 configurations was carried out, taking into account second-order of the perturbation theory. For unknown electronic levels predicted values of the level energies and hfs constants are given, which can facilitate further experimental investigations.

  19. Numerical Investigation of Structural Response of Corrugated Blast Wall Depending on Blast Load Pulse Shapes

    Directory of Open Access Journals (Sweden)

    Jung Min Sohn

    Full Text Available Abstract Hydrocarbon explosions are one of most hazardous events for workers on offshore platforms. To protect structures against explosion loads, corrugated blast walls are typically installed. However, the profiles of real explosion loads are quite different depending on the congestion and confinement of Topside structures. As the level of congestion and confinement increases, the explosion load increases by up to 8 bar, and the rising time of the load decreases. This study primarily aims to investigate the structural behavior characteristics of corrugated blast walls under different types of explosion loadings. Four loading shapes were applied in the structural response analysis, which utilized a dynamic nonlinear finite element method.

  20. SEM investigation of incandescent lamp mantle structure on durability

    International Nuclear Information System (INIS)

    Gerneke, D.; Lang, C.

    2002-01-01

    Full text: The incandescent mantle as used on pressure and non-pressure liquid fuel lamps has been in use for over 100 years. What remains unexplained is the way in which the resistance to mechanical shock and the decline in tensile strength with usage is experienced. It has been suggested that to improve durability it is necessary to continuously burn a new mantle for the first two to three hours. The known factors in mantle durability and mechanical strength are chemical composition and fabric weave. This study was undertaken to investigate the effects of burning time and temperature on thorium oxide mantles. The operating temperature of mantles on a range of kerosene pressure lamps was measured and found to be between 800 and 1100 deg C. Heat treatments of thorium based Coleman mantles were carried out in a laboratory furnace within these ranges of temperatures for periods ranging from 2 minutes to 2 hours. The mantles were then viewed in a LEO S440 analytical SEM. Results at 800 deg C show a distinct change in surface morphology with increasing exposure time. At the shorter times (2-5 minutes) the surface was relatively smooth. With increased time periods (15 - 120 minutes) the surface was observed to have a large lumpy structure. At 1100 deg C the difference in surface morphology was not apparent between the shortest and longest times. The surface appears much smoother and no lumpy structure was observed. This suggests that when a mantle is operated at the higher temperature of 1100 deg C the structure of the Thorium oxide is quickly transformed into the known stronger amorphous form. This is taken as the observed smooth structure seen in the SEM images of the 1100 deg C samples. Thus the mantle is expected to be more resistant to mechanical shock and have increased durability. Practical field test results confirm these observations. The mantle on a lamp that is operating efficiently, burns brightly, will far outlast a mantle on an inefficient lamp which bums

  1. Typical investigational medicinal products follow relatively uniform regulations in 10 European Clinical Research Infrastructures Network (ECRIN) countries

    DEFF Research Database (Denmark)

    Gluud, Christian; Kubiak, Christine; Whitfield, Kate

    2012-01-01

    In order to facilitate multinational clinical research, regulatory requirements need to become international and harmonised. The EU introduced the Directive 2001/20/EC in 2004, regulating investigational medicinal products in Europe.......In order to facilitate multinational clinical research, regulatory requirements need to become international and harmonised. The EU introduced the Directive 2001/20/EC in 2004, regulating investigational medicinal products in Europe....

  2. Investigating the factorial structure and availability of work time control in a representative sample of the Swedish working population.

    Science.gov (United States)

    Albrecht, Sophie C; Kecklund, Göran; Tucker, Philip; Leineweber, Constanze

    2016-05-01

    Past research has often neglected the sub-dimensions of work time control (WTC). Moreover, differences in levels of WTC with respect to work and demographic characteristics have not yet been examined in a representative sample. We investigated these matters in a recent sample of the Swedish working population. The study was based on the 2014 data collection of the Swedish Longitudinal Occupational Survey of Health. We assessed the structure of the WTC measure using exploratory and confirmatory factor analysis. Differences in WTC by work and demographic characteristics were examined with independent samplet-tests, one-way ANOVAs and gender-stratified logistic regressions. Best model fit was found for a two-factor structure that distinguished between control over daily hours and control over time off (root mean square error of approximation = 0.06; 95% CI 0.04 to 0.09; Comparative Fit Index (CFI) = 0.99). Women, shift and public-sector workers reported lower control in relation to both factors. Age showed small associations with WTC, while a stronger link was suggested for civil status and family situation. Night, roster and rotating shift work seemed to be the most influential factors on reporting low control over daily hours and time off. Our data confirm the two-dimensional structure underlying WTC, namely the components 'control over daily hours' and 'control over time off'. Women, public-sector and shift workers reported lower levels of control. Future research should examine the public health implications of WTC, in particular whether increased control over daily hours and time off can reduce health problems associated with difficult working-time arrangements. © 2015 the Nordic Societies of Public Health.

  3. Research of features and structure of electoral space of Ukraine in 2014 with the use of synthetic approach

    Directory of Open Access Journals (Sweden)

    M. M. Shelemba

    2015-02-01

    Full Text Available The article is aimed at the ground of expediency of the use of synthetic authorial model for research of features and structure of electoral space of Ukraine in 2014 year. Methodological principles of the use of synthetic model are expounded with the use of quality and quantitative methods researches of electoral space, among that methods of factor and cross­correlation analysis. A synthetic model (approach that is built on the basis of the use of the best scientific approaches takes into account features and progress of electoral space of Ukraine trends. The analysis of features and structure of electoral space of Ukraine is conducted in 2014 with the use of an offer model. The application author synthetic model allows the study of the use of association factor and correlation analysis to justify support to political parties during election campaigns, respectively, depending on the factors and the most important correlates. It was found that electoral choice depends on the actions of those factors in the highest degree the expectations of the region. This article has shown that the use of Ukraine at this stage of the investigated during election campaigns as the most significant social correlates of «Human Development Index» is reasonable and one that makes it possible to obtain reliable results. It is proved that a high level of correlation holds at a high level of support the party and, consequently, high sense of social correlates all variants of expert research.

  4. Investigation of Wireless Sensor Networks for Structural Health Monitoring

    Directory of Open Access Journals (Sweden)

    Ping Wang

    2012-01-01

    Full Text Available Wireless sensor networks (WSNs are one of the most able technologies in the structural health monitoring (SHM field. Through intelligent, self-organising means, the contents of this paper will test a variety of different objects and different working principles of sensor nodes connected into a network and integrated with data processing functions. In this paper the key issues of WSN applied in SHM are discussed, including the integration of different types of sensors with different operational modalities, sampling frequencies, issues of transmission bandwidth, real-time ability, and wireless transmitter frequency. Furthermore, the topology, data fusion, integration, energy saving, and self-powering nature of different systems will be investigated. In the FP7 project “Health Monitoring of Offshore Wind Farms,” the above issues are explored.

  5. The Monotonicity Puzzle: An Experimental Investigation of Incentive Structures

    Directory of Open Access Journals (Sweden)

    Jeannette Brosig

    2010-05-01

    Full Text Available Non-monotone incentive structures, which - according to theory - are able to induce optimal behavior, are often regarded as empirically less relevant for labor relationships. We compare the performance of a theoretically optimal non-monotone contract with a monotone one under controlled laboratory conditions. Implementing some features relevant to real-world employment relationships, our paper demonstrates that, in fact, the frequency of income-maximizing decisions made by agents is higher under the monotone contract. Although this observed behavior does not change the superiority of the non-monotone contract for principals, they do not choose this contract type in a significant way. This is what we call the monotonicity puzzle. Detailed investigations of decisions provide a clue for solving the puzzle and a possible explanation for the popularity of monotone contracts.

  6. Investigating performance of microchannel evaporators with different manifold structures

    Energy Technology Data Exchange (ETDEWEB)

    Shi, Junye; Qu, Xiaohua; Qi, Zhaogang; Chen, Jiangping [Institute of Refrigeration and Cryogenics, Shanghai Jiao Tong University, No. 800, Dongchuan Rd, Shanghai 200240 (China)

    2011-01-15

    In this paper, the performances of microchannel evaporators with different manifold structures are experimentally investigated. Eight evaporator samples with 7 different designs of the I/O manifold and 5 different designs of the return manifold are made for this study. The performances of the evaporator samples are tested on a psychometric calorimeter test bench with the refrigerant 134A at a real automotive AC condition. The results on the variations of the cooling capacity and air temperature distribution of the evaporator due to the deflector designs in the I/O manifold and flow hole arrangements in the return manifold are presented and analyzed. By studying the KPI's for the performance of an evaporator, the design trade-off for an evaporator designer is summarized and discussed. (author)

  7. Investigation of impact phenomena on the marine structures: Part II - Internal energy of the steel structure applied by selected materials in the ship-ship collision incidents

    Science.gov (United States)

    Prabowo, A. R.; Baek, S. J.; Lee, S. G.; Bae, D. M.; Sohn, J. M.

    2018-01-01

    Phenomena of impact loads on the marine structures has attracted attention to be predicted regarding its influences to structural damage. This part demands sustainable analysis and observation as tendency may vary from one to others since impact involves various scenario models and the structure itself experiences continuous development. Investigation of the damage extent can be conducted by observation on the energy behaviour during two entities involve in a contact. This study aimed to perform numerical investigation to predict structural damage by assessing absorbed strain energy represented by the internal energy during a series of ship collisions. The collision target in ship-ship interactions were determined on the single and double hulls part of a passenger ship. Tendency of the internal energy by the steel structures was summarized, and verification was presented by several crashworthiness criteria. It was found that steel structures applied by the material grades A and B produced different tendencies compared to the material grades D and E. Effect of the structural arrangement to structural responses in terms of strain and stress indicated that the single hull presented contour expansion mainly on the longitudinal directions.

  8. Investigation of turbulent structures in the edge of magnetized plasmas

    International Nuclear Information System (INIS)

    Nold, Bernhard

    2012-01-01

    Rising energy cost and progressing climate change will exacerbate existing and give birth to new conflicts. Energy savings and the development of new technologies can counteract the reasons for these conflicts. Beside renewable energy sources, nuclear fusion can help to meet this challenge. To build future fusion power plants smaller and more efficient, the magnetic confinement must be improved and the load on plasma facing components reduced. To this end, better understanding is required of turbulent transport processes in magnetized plasmas. Within the frame of the present work, the properties and dynamics of turbulent density structures (''blobs'') have been investigated, as well as their interaction with shear flows. Langmuir-probe measurements have been conducted in the tokamak ASDEX Upgrade and in the stellarator TJ-K, and compared with GEMR plasma turbulence simulations. It has been shown, that blobs are generated at the last closed flux surface (LCFS) of ASDEX Upgrade. They propagate perpendicular to the magnetic field lines in the radial and poloidal directions. The poloidal E x B-drift depends on the radial variation of the plasma potential. The latter is given by the electron temperature profile in front of the electrically conducting wall. Experimental results show, that this can lead to a shear layer inside the scrape-off layer (SOL) of a divertor tokamak due to inhomogeneous connection lengths to the wall. Blobs can hardly cross such a shear layer unchanged. This investigation shows how blobs can exchange particles and energy across a shear layer without changing their shapes and velocities substantially. However, the dynamics of the structures are different between both sides of the shear layer. Parallel drift-wave dynamics are dominant on the plasma core side, i.e. density and potential of the blobs are in phase. Outside of the shear layer, the interchange mechanism dominates due to shorter parallel connection lengths to the wall. The poloidal

  9. INSTRUMENTS AND METHODS OF INVESTIGATION: Positron annihilation spectroscopy in materials structure studies

    Science.gov (United States)

    Grafutin, Viktor I.; Prokop'ev, Evgenii P.

    2002-01-01

    A relatively new method of materials structure analysis — positron annihilation spectroscopy (PAS) — is reviewed. Measurements of positron lifetimes, the determination of positron 3γ- and 2γ-annihilation probabilities, and an investigation of the effects of different external factors on the fundamental characteristics of annihilation constitute the basis for this promising method. The ways in which the positron annihilation process operates in ionic crystals, semiconductors, metals and some condensed matter systems are analyzed. The scope of PAS is described and its prospects for the study of the electronic and defect structures are discussed. The applications of positron annihilation spectroscopy in radiation physics and chemistry of various substances as well as in physics and chemistry of solutions are exemplified.

  10. Future Secretariat: an innovation research coordination and governance structure

    Science.gov (United States)

    Ojima, D. S.; Johan, R.; Cramer, W.; Fukushi, K.; Allard, S.

    2014-12-01

    Future Earth, an emerging global sustainability research program, will be managed by a novel, internationally distributed secretariat spanning the globe and providing a platform for co-design, co-production, and co-delivery of knowledge to support research on the earth system, global development and transformation toward sustainability. The Future Earth secretariat has an innovative structure consisting of five global hubs functioning as a single entity; these hubs are located in Canada, Japan, France, Sweden, and the United States. The secretariat's reach is extended through a set of regional hubs covering Latin America, the Middle East, Africa, Europe, and Asia, with the potential to expand to additional areas. This secretariat will operate under the auspices of the Future Earth Governing Council The Future Earth Secretariat will support and enable the implementation of knowledge-sharing between research and stakeholder communities to enable society to cope with and to alter global environmental trends, and to transition society toward sustainability. The secretariat will provide coordination support to over 25 global environmental core projects and committees; coordinate scientific work across the whole Future Earth agenda; develop and implement innovative mechanisms for bottom-up inputs, synthesis and integration. Future Earth, as a research program, aims to support global transformations toward sustainability through partnerships among scientific and stakeholder communities worldwide. It brings together existing international environmental research core projects associated with DIVERSITAS, the International Geosphere-Biosphere Programme, the International Human Dimensions Programme, and the World Climate Research Programme—to support coordinated, interdisciplinary research that can be used by decision makers seeking to reduce their impact and provide more sustainable products and services. USGCRP partners with Future Earth through scientific participation in

  11. The Structural Engineering Strategy for Photonic Material Research and Device Development

    Directory of Open Access Journals (Sweden)

    Yalin Lu

    2007-01-01

    Full Text Available A new structural engineering strategy is introduced for optimizing the fabrication of arrayed nanorod materials, optimizing superlattice structures for realizing a strong coupling, and directly developing nanophotonic devices. The strategy can be regarded as “combinatorial” because of the high efficiency in optimizing structures. In this article, this strategy was applied to grow ZnO nanorod arrays, and to develop a new multifunctional photodetector using such nanorod arrays, which is able to simultaneously detect power, energy, and polarization of an incident ultraviolet radiation. The strategy was also used to study the extraordinary dielectric behavior of relaxor ferroelectric lead titanate doped lead magnesium niobate heterophase superlattices in the terahertz frequencies, in order to investigate their dielectric polariton physics and the potential to be integrated with tunable surface resonant plasmonics devices.

  12. Investigating the Structures of Turbulence in a Multi-Stream, Rectangular, Supersonic Jet

    Science.gov (United States)

    Magstadt, Andrew S.

    Supersonic flight has become a standard for military aircraft, and is being seriously reconsidered for commercial applications. Engine technologies, enabling increased mission capabilities and vehicle performance, have evolved nozzles into complex geometries with intricate flow features. These engineering solutions have advanced at a faster rate than the understanding of the flow physics, however. The full consequences of the flow are thus not known, and using predictive tools becomes exceedingly difficult. Additionally, the increasing velocities associated with supersonic flight exacerbate the preexisting jet noise problem, which has troubled the engineering community for nearly 65 years. Even in the simplest flows, the full consequences of turbulence, e.g. noise production, are not fully understood. For composite flows, the fluid mechanics and acoustic properties have been studied even less sufficiently. Before considering the aeroacoustic problem, the development, structure, and evolution of the turbulent flow-field must be considered. This has prompted an investigation into the compressible flow of a complex nozzle. Experimental evidence is sought to explain the stochastic processes of the turbulent flow issuing from a complex geometry. Before considering the more complicated configuration, an experimental campaign of an axisymmetric jet is conducted. The results from this study are presented, and guide research of the primary flow under investigation. The design of a nozzle representative of future engine technologies is then discussed. Characteristics of this multi-stream rectangular supersonic nozzle are studied via time-resolved schlieren imaging, stereo PIV measurements, dynamic pressure transducers, and far-field acoustics. Experiments are carried out in the anechoic chamber at Syracuse University, and focus primarily on the flow-field. An extensive data set is generated, which reveals a detailed view of a very complex flow. Shear, shock waves, unequal

  13. Investigation on strain sensing properties of carbon-based nanocomposites for structural aircraft applications

    Science.gov (United States)

    Lamberti, Patrizia; Spinelli, Giovanni; Tucci, Vincenzo; Guadagno, Liberata; Vertuccio, Luigi; Russo, Salvatore

    2016-05-01

    The mechanical and electrical properties of a thermosetting epoxy resin particularly indicated for the realization of structural aeronautic components and reinforced with multiwalled carbon nanotubes (MWCNTs, at 0.3 wt%) are investigated for specimens subjected to cycles and different levels of applied strain (i.e. ɛ) loaded both in axial tension and flexural mode. It is found that the piezoresistive behavior of the resulting nanocomposite evaluated in terms of variation of the electrical resistance is strongly affected by the applied mechanical stress mainly due to the high sensibility and consequent rearrangement of the electrical percolating network formed by MWCNTs in the composite at rest or even under a small strain. In fact, the variations in electrical resistance that occur during the mechanical stress are correlated to the deformation exhibited by the nanocomposites. In particular, the overall response of electrical resistance of the composite is characterized by a linear increase with the strain at least in the region of elastic deformation of the material in which the gauge factor (i.e. G.F.) of the sensor is usually evaluated. Therefore, the present study aims at investigating the possible use of the nanotechnology for application of embedded sensor systems in composite structures thus having capability of self-sensing and of responding to the surrounding environmental changes, which are some fundamental requirements especially for structural aircraft monitoring applications.

  14. Investigation of structure in the modular light pipe component for LED automotive lamp

    Science.gov (United States)

    Chen, Hsi-Chao; Zhou, Yang; Huang, Chien-Sheng; Jhong, Wan-Ling; Cheng, Bo-Wei; Jhang, Jhe-Ming

    2014-09-01

    Light-Emitting Diodes (LEDs) have the advantages of small length, long lifetime, fast response time (μs), low voltage, good mechanical properties and environmental protection. Furthermore, LEDs could replace the halogen lamps to avoid the mercury pollution and economize the use of energy. Therefore, the LEDs could instead of the traditional lamp in the future and became an important light source. The proposal of this study was to investigate the effects of the structure and length of the reflector component for a LED automotive lamp. The novel LED automotive lamp was assembled by several different modularization columnar. The optimized design of the different structure and the length to the reflector was simulated by software TracePro. The design result must met the vehicle regulation of United Nations Economic Commission for Europe (UNECE) such as ECE-R19 etc. The structure of the light pipe could be designed by two steps structure. Then constitute the proper structure and choose different power LED to meet the luminous intensity of the vehicle regulation. The simulation result shows the proper structure and length has the best total luminous flux and a high luminous efficiency for the system. Also, the stray light could meet the vehicle regulation of ECE R19. Finally, the experimental result of the selected structure and length of the light pipe could match the simulation result above 80%.

  15. External and internal structure of weevils (Insecta: Coleoptera) investigated with phase-contrast X-ray imaging

    International Nuclear Information System (INIS)

    Hoennicke, M.G.; Cusatis, C.; Rigon, L.; Menk, R.-H.; Arfelli, F.; Foerster, L.A.; Rosado-Neto, G.H.

    2010-01-01

    Weevils (Coleoptera: Curculionidae) are identified by the external structure (dorsal, ventral and lateral features) and also by internal structure. The genitalia can be used to distinguish the sex and to identify the insects when the external structure appears identical. For this purpose, a destructive dissecting microscopy procedure is usually employed. In this paper, phase contrast X-ray imaging (radiography and tomography) is employed to investigate the internal structure (genitalia) of two entire species of weevils that presents very similar external structures (Sitophilus oryzae and Sitophilus zeamais). The detection of features, which looks like the genital structure, shows that such non-destructive technique could be used as an alternative method for identification of insects. This method is especially useful in examining the internal features of precious species from museum collections, as already described in the recent literature.

  16. Investigation of the porous structure of glassy carbon by SAXS - an application of synchrotron radiation

    Energy Technology Data Exchange (ETDEWEB)

    Braun, A; Baertsch, M; Schnyder, B; Koetz, R; Haas, O [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1999-08-01

    The porous structure of Electrochemical Double Layer Capacitor (EDC) Electrodes was investigated using Small Angle X-ray Scattering (SAXS), assuming logarithmically normal distributed micropores. (author) 2 figs., 1 ref.

  17. Investigation of heat treatment conditions of structural material for blanket fabrication process

    International Nuclear Information System (INIS)

    Hirose, Takanori; Suzuki, Satoshi; Akiba, Masato; Shiba, Kiyoyuki; Sawai, Tomotsugu; Jitsukawa, Shiro

    2004-01-01

    This paper presents recent results of thermal hysteresis effects on ceramic breeder blanket structural material. Reduced activation ferritic/martensitic (RAF) steel is the leading candidates for the first wall structural materials of breeding blankets. RAF steel demonstrates superior resistance to high dose neutron irradiation, because the steel has tempered martensite structure which contains the number of sink site for radiation defects. This microstructure obtained by two-step heat treatment, first is normalizing at temperature above 1200 K and the second is tempering at temperature below 1100 K. Recent study revealed the thermal hysteresis has significant impacts on the post-irradiation mechanical properties. The breeding blanket has complicated structure, which consists of tungsten armor and thin first wall with cooling pipe. The blanket fabrication requires some high temperature joining processes. Especially hot isostatic pressing (HIP) is examined as a near-net-shape fabrication process for this structure. The process consists of heating above 1300 K and isostatic pressing at the pressure above 150 MPa followed by tempering. Moreover ceramics pebbles are packed into blanket module and the module is to be seamed by welding followed by post weld heat treatment in the final assemble process. Therefore the final microstructural features of RAFs strongly depend on the blanket fabrication process. The objective of this work is to evaluate the effects of thermal hysteresis corresponding to blanket fabrication process on RAFs microstructure in order to establish appropriate blanket fabrication process. Japanese RAFs F82H (Fe-0.1C-8Cr-2W-0.2V-0.05Ta) was investigated by metallurgical method after isochronal heat treatment up to 1473 K simulating high temperature bonding process. Although F82H showed significant grain growth after conventional solid HIP conditions (1313 K x 2 hr.), this coarse grained microstructure was refined by the post HIP normalizing at

  18. Taking action: A cross-modal investigation of discourse structure

    Directory of Open Access Journals (Sweden)

    Elsi eKaiser

    2012-06-01

    Full Text Available Segmenting stimuli into events and understanding the relations between those events is crucial for understanding the world. For example, on the linguistic level, successful language use requires the ability to recognize semantic coherence relations between events (e.g. causality, similarity. However, relatively little is known about the mental representation of discourse structure. We report two experiments that used a cross-modal priming paradigm to investigate how humans represent the relations between events. Participants repeated a motor action modeled by the experimenter (e.g. rolled a ball towards mini bowling pins to knock them over, and then completed an unrelated sentence-continuation task (e.g. provided a continuation for Peter scratched John. …. In two experiments, we tested whether and how the coherence relations represented by the motor actions (e.g., causal events vs. non-causal events influence participants’ performance in the linguistic task. Our analyses focused on the coherence relations between the prompt sentences and participants’ continuations, as well as the referential shifts in the continuations. As a whole, the results suggest that the mental representations activated by motor actions overlap with the mental representations used during linguistic discourse-level processing, but nevertheless contain fine-grained information about sub-types of causality (reaction vs. consequence. In addition, the findings point to parallels between shifting one’s attention from one event to another and shifting one’s attention from one referent to another, and indicate that the event structure of causal sequences is conceptualized more like single events than like two distinct events. As a whole, the results point towards common representations activated by motor sequences and discourse-semantic relations, and further our understanding of the mental representation of discourse structure, an area that is still not yet well-understood.

  19. Nuclear structure research. Annual progress report

    International Nuclear Information System (INIS)

    Wood, J.L.

    1996-01-01

    The most significant development this year has been the realization that EO transition strength is a fundamental manifestation of nuclear mean-square charge radius differences. Thus, EO transitions provide a fundamental signature for shape coexistence in nuclei. In this sense, EO transitions are second only to E2 transitions for signaling (quadrupole) shapes in nuclei and do so when shape differences occur. A major effort has been devoted to the review of EO transitions in nuclei. Experiments have been carried out or are scheduled at: ATLAS/FMA (α decay of very neutron-deficient Bi isotopes); MSU/NSCL (β decay of 56 Cu); and HRIBF/RMS (commissioning of tape collector, internal conversion/internal-pair spectrometer; β decay of 58 Cu). A considerable effort has been devoted to planning the nuclear structure physics that will be pursued using HRIBF. Theoretical investigations have continued in collaboration with Prof. K. Heyde, Prof. D.J. Rowe, Prof. J.O. Rasmussen, and Prof. P.B. Semmes. These studies focus on shape coexistence and particle-core coupling

  20. An Investigation of the Internal Structure of the Biggs Study Process Questionnaire.

    Science.gov (United States)

    Watkins, David; Hattie, John

    1980-01-01

    Results of an Australian study of the Biggs Study Process Questionnaire (SPQ) are presented. The purposes of the research were to: (1) re-examine the SPQ's internal consistency; (2) explore dimensionality of the SPQ scales; and (3) investigate validity of Bigg's model of the study process complex through factor analysis. (Author/GK)

  1. EXAFS as a tool for investigation of the local environment of Ge atoms in buried low-dimensional structures

    International Nuclear Information System (INIS)

    Demchenko, I.N.; Lawniczak-Jablonska, K.; Liliental-Weber, Z.; Zakharov, D.N.; Zhuravlev, K.S.

    2005-01-01

    In spite of large number of articles dedicated to the investigation of GeSi islands, a lot of problems concerning growth mechanism and island composition, as well as elastic strains inside the QDs, are still unsolved. To solve such problems, the GeSi low dimensional structures were studied by Extended X-Ray Absorption Fine Structure (EXAFS). The aim of this investigation was to get knowledge about the local structure around Ge atoms inside formed quantum dots. The paper presents a series of measurements performed for a single Ge layer buried in the silicon matrix at A1 station at the HASYLAB/DESY (Germany) with the angle of 45 o between the incident beam and sample surface. The fluorescence, total electron yield and the transmission modes of detection were used. To confirm the EXAFS analysis conclusion more measurements were performed using transmission electron microscopy (TEM). The low temperature samples with 8-20 ML of Ge were investigated by cross-section and plan-view TEM. The reported results of TEM studies of the local structure of germanium quantum dots (QDs) in Si/Ge/Si '' sandwich '' structures are in good correlation with EXAFS conclusion

  2. Structural investigations of amorphised iron and nickel by high-fluence metalloid ion implantation

    International Nuclear Information System (INIS)

    Rauschenbach, B.; Otto, G.; Hohmuth, K.; Heera, V.

    1987-01-01

    Boron, phosphorus and arsenic ions have been implanted into evaporated iron and nickel thin films at room temperature, and the implantation-induced microstructure has been investigated by high-voltage electron microscopy and transmission high energy electron diffraction. The metal films were implanted with ions to a constant dose of 1 x 10 17 and 5 x 10 17 ions/cm 2 respectively at energy of 50 keV. An amorphous layer was produced by boron and phosphorus ion implantation. Information on the atomic structure of the amorphous layers was obtained from the elastically diffracted electron intensity. On the basis of the correct scattering curves, the total interference function and the pair correlation function were determined. Finally, the atomic arrangement of the implantation-induced amorphous layers is discussed and structure produced by ion irradiation is compared with amorphous structures formed with other techniques. (author)

  3. Experimental and theoretical investigation of lattice defect structures in a series of Zn, Fe-doped nonstoichiometric lithium niobate

    International Nuclear Information System (INIS)

    Guo Fengyun; Lue Qiang; Sun Liang; Li Hongtao; Zhen Xihe; Xu Yuheng; Zhao Liancheng

    2006-01-01

    A series of the double doped lithium niobate (LiNbO 3 , LN) single crystals had been grown by Czochralski method. The Curie temperatures of various concentrations doped or [Li]/[Nb] ratio LN crystals measured by differential thermal analysis (DTA) were discussed to investigate their defect structures with Safaryan et al. new approach about LN lattice defect structure using Curie temperatures calculated. Infrared transmission spectra of various concentrations doped were used to compare the investigation above. The results show that the lithium vacancy model is the more probable to describe the lattice defect structure of the doped LN single crystal

  4. Investigation of Time Series Representations and Similarity Measures for Structural Damage Pattern Recognition

    Science.gov (United States)

    Swartz, R. Andrew

    2013-01-01

    This paper investigates the time series representation methods and similarity measures for sensor data feature extraction and structural damage pattern recognition. Both model-based time series representation and dimensionality reduction methods are studied to compare the effectiveness of feature extraction for damage pattern recognition. The evaluation of feature extraction methods is performed by examining the separation of feature vectors among different damage patterns and the pattern recognition success rate. In addition, the impact of similarity measures on the pattern recognition success rate and the metrics for damage localization are also investigated. The test data used in this study are from the System Identification to Monitor Civil Engineering Structures (SIMCES) Z24 Bridge damage detection tests, a rigorous instrumentation campaign that recorded the dynamic performance of a concrete box-girder bridge under progressively increasing damage scenarios. A number of progressive damage test case datasets and damage test data with different damage modalities are used. The simulation results show that both time series representation methods and similarity measures have significant impact on the pattern recognition success rate. PMID:24191136

  5. Investigation of Time Series Representations and Similarity Measures for Structural Damage Pattern Recognition

    Directory of Open Access Journals (Sweden)

    Wenjia Liu

    2013-01-01

    Full Text Available This paper investigates the time series representation methods and similarity measures for sensor data feature extraction and structural damage pattern recognition. Both model-based time series representation and dimensionality reduction methods are studied to compare the effectiveness of feature extraction for damage pattern recognition. The evaluation of feature extraction methods is performed by examining the separation of feature vectors among different damage patterns and the pattern recognition success rate. In addition, the impact of similarity measures on the pattern recognition success rate and the metrics for damage localization are also investigated. The test data used in this study are from the System Identification to Monitor Civil Engineering Structures (SIMCES Z24 Bridge damage detection tests, a rigorous instrumentation campaign that recorded the dynamic performance of a concrete box-girder bridge under progressively increasing damage scenarios. A number of progressive damage test case datasets and damage test data with different damage modalities are used. The simulation results show that both time series representation methods and similarity measures have significant impact on the pattern recognition success rate.

  6. Investigating potential transferability of place-based research in land system science

    Science.gov (United States)

    Václavík, Tomáš; Langerwisch, Fanny; Cotter, Marc; Fick, Johanna; Häuser, Inga; Hotes, Stefan; Kamp, Johannes; Settele, Josef; Spangenberg, Joachim H.; Seppelt, Ralf

    2016-09-01

    Much of our knowledge about land use and ecosystem services in interrelated social-ecological systems is derived from place-based research. While local and regional case studies provide valuable insights, it is often unclear how relevant this research is beyond the study areas. Drawing generalized conclusions about practical solutions to land management from local observations and formulating hypotheses applicable to other places in the world requires that we identify patterns of land systems that are similar to those represented by the case study. Here, we utilize the previously developed concept of land system archetypes to investigate potential transferability of research from twelve regional projects implemented in a large joint research framework that focus on issues of sustainable land management across four continents. For each project, we characterize its project archetype, i.e. the unique land system based on a synthesis of more than 30 datasets of land-use intensity, environmental conditions and socioeconomic indicators. We estimate the transferability potential of project research by calculating the statistical similarity of locations across the world to the project archetype, assuming higher transferability potentials in locations with similar land system characteristics. Results show that areas with high transferability potentials are typically clustered around project sites but for some case studies can be found in regions that are geographically distant, especially when values of considered variables are close to the global mean or where the project archetype is driven by large-scale environmental or socioeconomic conditions. Using specific examples from the local case studies, we highlight the merit of our approach and discuss the differences between local realities and information captured in global datasets. The proposed method provides a blueprint for large research programs to assess potential transferability of place-based studies to other

  7. Experimental investigation on full scale RC beam-column joint of NPP structures

    International Nuclear Information System (INIS)

    Thandavamoorthy, T.S.; Lakshmanan, N.; Reddy, G.R.; Kushwaha, H.S.

    2003-01-01

    The Nuclear Power Plant (NPP) structures in India are constructed using reinforced concrete. The beam-column joint in these structures are critical sub-assemblages because they ensure continuity of a structure and transfer forces from one element to another. Under seismic excitation, the beam-column joint region is subjected to horizontal and vertical shear forces whose magnitudes are typically many times higher than those within the adjacent beams and columns. In view of the increased incidence of seismicity in the country, the safety of these structures against earthquake loading assumes greater significance. There is a growing need to look into the seismic safety aspect of existing RC frame type structures in NPPs, which have been designed as per codes prevalent at the time of their construction. Seismic performance of such joints has not been studied extensively in India. Therefore experimental testing of full scale joint identical to those available in the existing NPP structures, was carried out to study its behaviour and evaluate its capacity. The size of the beam of the joint was 2000 mm x 610 mm x 915 mm and column 2915 mm x 610 mm x 915 mm. The percentage reinforcement of the beam was 4.95 and column 1.5. Such full scale and heavily reinforced concrete joint was cast successfully in the laboratory and tested under monotonic loading. The paper presents a complete description of the experimental testing, observations made during testing as for cracking, deflection and rotation of joint, discussion of results obtained, etc. Conclusions drawn from the investigation are also presented. (author)

  8. Study on systemizing technology on investigation and analysis of deep underground geological environment. Japanese fiscal year, 2007 (Contract research)

    International Nuclear Information System (INIS)

    Kojima, Keiji; Ohnishi, Yuzo; Aoki, Kenji; Watanabe, Kunio; Nishigaki, Makoto; Tosaka, Hiroyuki; Shimada, Jun; Tochiyama, Osamu; Yoshida, Hidekazu; Ogata, Nobuhisa; Nishio, Kazuhisa

    2009-03-01

    In this year, the following studies were carried out with the aim of systemizing the technology on the investigation and analysis to understand the deep underground geological environment in relation to the radioactive waste disposal. (1) The study on the research and development (R and D) subjects which turned to the practical investigation and analysis of deep underground geological environment. (2) The study on the advanced technical basis for the investigation and analysis of deep underground geological environment. The results obtained from the studies are as follows: Regarding (1), the specific investigations, measurements and numerical and chemical analyses were performed particularly for research subjects: 1) engineering technology and 2) geological environment. Based on the results on (1), 3) tasks of collaboration research on intermediate area between the research fields, including the safety assessment field, were selected. Also redefinition of the NFC (Near Field Concept) were discussed. Regarding (2), based on the extracted tasks of JAEA (Japan Atomic Energy Agency) research project, the study was implemented considering previous R and D results and detailed research at the research field was carried out. This study contributed to the R and D development for its practical application. Concurrently, information exchange and discussion on the 2nd phase (the Construction Phase) of the MIU (Mizunami Underground Research Laboratory) research program were often held. (author)

  9. An Open-Structure Treadmill Gait Trainer: From Research to Application

    OpenAIRE

    Li, Jian; Chen, Diansheng; Fan, Yubo

    2017-01-01

    Lower limb rehabilitation robots are designed to enhance gait function in individuals with motor impairments. Although numerous rehabilitation robots have been developed, only few of these robots have been used in practical health care, particularly in China. The objective of this study is to construct a lower limb rehabilitation robot and bridge the gap between research and application. Open structure to facilitate practical application was created for the whole robot. Three typical movement...

  10. Structure and texture investigations by neutron diffraction

    Energy Technology Data Exchange (ETDEWEB)

    Vratislav, S [Ceske Vysoke Uceni Technicke, Prague (Czechoslovakia). Fakulta Jaderna a Fysikalne Inzenyrska

    1982-01-01

    Analysis of the KSN-2 neutron diffractometer parameters helped improve the KSN-2 resolution to 7.5x10/sup -3/. Structure analysis of compounds with elementary cell volume down to 5 nm/sup 3/ can now be performed. Resolution analysis of the neutron powder diffractometer and its conclusions are described, results of the structure determination of zeolites and the magnetic structure determination of perovskites are given. The three-dimensional distribution function and its use in calculating the elastic modulus of aluminium sheets are mentioned.

  11. The research of structural features of astralens - nanodimensional carbon particles of fulleroid type

    International Nuclear Information System (INIS)

    Ponomarev, A.N.; Nikitin, V.A.; Rybalko, V.V.

    2006-01-01

    The article is focused on the research of structural features of astralens - nanodimensional carbonic particles of fulleroid type. Astralens are perspective nanomodificators of properties of materials of different types. The potentials os astralens as modificators depend on their characteristic structural features, and in the first place, on the distribution of nanoparticles by sizes. The typical dimensions of astralens are determined to be within the range of 15-75 nm [ru

  12. Chemical investigation, isolation and structural analysis of flavones from primula veris

    International Nuclear Information System (INIS)

    Huck, Ch.

    1998-01-01

    The chemical investigation, isolation and structural analysis of six flavones present in flowers of Primula veris is described. Sample preparation of substances G from Primula veris comprised methanol extraction, low pressure chromatography on aluminum oxide, medium pressure chromatography on silica gel, and RP-HPLC on ODS. The six flavones, which were identified by their blue fluorescence after separation by thin layer chromatography, were named substance G1, G2, G3, G4, G5 and G6 according to their Rf-values. Fractions were collected during each of the separation processes and the fractions were analyzed by NP-HPLC and RP-HPLC. Higher resolution was obtained by NP-HPLC on a silica gel column and an n-hexane/ isopropanol (92:8 v/v) eluent, where 6 peaks (G1, G2, G3, G4, G5 and G6) were obtained. Diode array detection from 190 - 350 nm was utilized for the recording of UV-spectra for peak identification and peak-purity-analysis. The structures of Substance G4 and Substance G6 were established on the basis of UV, NMR, EI-MS and APCI-MS. The structure of the isolated substance G4 was verified by chemical synthesis. (author)

  13. Synthesis and anticancer structure activity relationship investigation of cationic anthraquinone analogs.

    Science.gov (United States)

    Shrestha, Jaya P; Fosso, Marina Y; Bearss, Jeremiah; Chang, Cheng-Wei Tom

    2014-04-22

    We have synthesized a series of novel 4,9-dioxo-4,9-dihydro-1H-naphtho[2,3-d][1,2,3]triazol-3-ium salts, which can be viewed as analogs of cationic anthraquinones. Unlike the similar analogs that we have reported previously, these compounds show relatively weak antibacterial activities but exert strong anticancer activities (low μM to nM GI50), in particular, against melanoma, colon cancer, non-small cell lung cancer and central nervous system (CNS) cancer. These compounds are structurally different from their predecessors by having the aromatic group, instead of alkyl chains, directly attached to the cationic anthraquinone scaffold. Further investigation in the structure-activity relationship (SAR) reveals the significant role of electron donating substituents on the aromatic ring in enhancing the anticancer activities via resonance effect. Steric hindrance of these groups is disadvantageous but is less influential than the resonance effect. The difference in the attached groups at N-1 position of the cationic anthraquinone analog is the main structural factor for the switching of biological activity from antibacterial to anticancer. The discovery of these compounds may lead to the development of novel cancer chemotherapeutics. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

  14. Structural investigations on nanocrystalline Ni-W alloy films by transmission electron microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Klimenkov, M. [Institut fuer Materialforschung, Forschungszentrum Karlsruhe, 76021 Karlsruhe (Germany); Haseeb, A.S.M.A. [Department of Mechanical Engineering, University of Malaya, 50603 Kuala Lumpur (Malaysia); Bade, K., E-mail: klaus.bade@imt.fzk.d [Institut fuer Mikrostrukturtechnik, Forschungszentrum Karlsruhe, 76021 Karlsruhe (Germany)

    2009-10-30

    Electrodeposited Ni-W alloys have been investigated in the as-deposited state by transmission electron microscopy in order to investigate the microstructural features in dependence of the tungsten content. Within the tungsten content range from 7 at.% up to 12 at.%, the microstructure is nanocrystalline characterized by a bimodal grain size distribution, consisting out of 20 to 200 nm sized grains and also larger grains with several 100 nm characteristic dimension. No clear trend in microstructure formation is visible with W content or deposition conditions in the investigated W content range. Only solid solution phase characteristics were observed. The lattice constant is 0.360 nm for 12 at.% W as derived from electron diffraction for the solid solution face centered cubic structure. Larger grains show twinning and stacking faults. Voids with diameter of a few nm were detected along with some multiple twinned particles, indicating high stress level during growth. About 2 at.% difference in the alloy composition from grain to grain was measured.

  15. THE FLORENCE BAPTISTERY: 3-D SURVEY AS A KNOWLEDGE TOOL FOR HISTORICAL AND STRUCTURAL INVESTIGATIONS

    Directory of Open Access Journals (Sweden)

    G. Tucci

    2016-06-01

    Full Text Available The Baptistery of San Giovanni is one of the most important pieces of architecture in Florence. It is an octagonal building, encrusted with marble both internally and externally (including the pyramidal roof and covered inside by a magnificent dome with sparkling gold mosaics. During Dante’s time, it appeared much older than the other monuments, so its origins were considered as hailing straight from Florence’s most remote and mythical history. Even though we have much more data now, scholars still disagree over the interpretations on the origin and construction sequence of the monument. Survey has always been considered a main instrument for understanding historical architecture, mostly from constructional and structural points of view. During the last century, the Baptistery was surveyed using both traditional techniques and the most up-to-date instruments available at the time, such as topography, close-range photogrammetry and laser scanning. So, a review of those early applications, even if partial or isolated, can significantly attest to the state of the art and evolution of survey techniques. During recent years, the Opera di Santa Maria del Fiore promoted new research and a wide range of diagnostic investigations aimed at acquiring greater knowledge of the monument in anticipation of the cleaning and restoration of the outer wall surfaces during 2015. Among this research, GeCo Lab carried out a new systematic and complete laser scanner survey of the whole Baptistery, acquiring data for the more inaccessible parts that were given little attention during other survey campaigns. First of all, the paper analyses recent contributions given by instrumental surveys in advancing knowledge of the building, with references to the cutting-edge techniques and measurement tools used at the time. Then, it describes the new survey campaign, illustrating the approach followed in the planning, data acquisition and data elaboration phases; finally, it

  16. The Florence Baptistery: 3-D Survey as a Knowledge Tool for Historical and Structural Investigations

    Science.gov (United States)

    Tucci, G.; Bonora, V.; Fiorini, L.; Conti, A.

    2016-06-01

    The Baptistery of San Giovanni is one of the most important pieces of architecture in Florence. It is an octagonal building, encrusted with marble both internally and externally (including the pyramidal roof) and covered inside by a magnificent dome with sparkling gold mosaics. During Dante's time, it appeared much older than the other monuments, so its origins were considered as hailing straight from Florence's most remote and mythical history. Even though we have much more data now, scholars still disagree over the interpretations on the origin and construction sequence of the monument. Survey has always been considered a main instrument for understanding historical architecture, mostly from constructional and structural points of view. During the last century, the Baptistery was surveyed using both traditional techniques and the most up-to-date instruments available at the time, such as topography, close-range photogrammetry and laser scanning. So, a review of those early applications, even if partial or isolated, can significantly attest to the state of the art and evolution of survey techniques. During recent years, the Opera di Santa Maria del Fiore promoted new research and a wide range of diagnostic investigations aimed at acquiring greater knowledge of the monument in anticipation of the cleaning and restoration of the outer wall surfaces during 2015. Among this research, GeCo Lab carried out a new systematic and complete laser scanner survey of the whole Baptistery, acquiring data for the more inaccessible parts that were given little attention during other survey campaigns. First of all, the paper analyses recent contributions given by instrumental surveys in advancing knowledge of the building, with references to the cutting-edge techniques and measurement tools used at the time. Then, it describes the new survey campaign, illustrating the approach followed in the planning, data acquisition and data elaboration phases; finally, it gives examples of some

  17. A neutron and synchrotron investigation of the electronic structure of lanthanide zirconates

    International Nuclear Information System (INIS)

    Clements, Richard; Kennedy, Brendan; Ling, Chris; Stampfl, Anton P.J.

    2009-01-01

    Full text: The lanthanide zirconates are of interest for use in inert matrix fuels and nuclear wasteforms. A variety of studies have been performed to determine the suitability of a material as an inert matrix or wasteform. For use in these applications, the material's structure must be resistant to radiation damage and its thermal, thermodynamic and mechanical properties must be known. The structure's ability to incorporate an actinide host into the lattice vacancy must also be known. These properties may be better understood by investigating the f-electronic structure, which has historically proved difficult to model. We have undertaken a synthesis of the full range of lanthanide zirconate series using solid state techniques. We have performed neutron powder diffraction on a selection of the series in conjunction with the following measurements using synchrotron radiation: powder x-ray diffraction, VUV photoluminescence spectra, x-ray photoemission spectroscopy (XPS) and x-ray absorption near edge spectroscopy (XANES) The results are to be analysed using OFT modeling techniques. These results will be presented, along with details of the analysis and synthetic techniques used.

  18. Being scientifical: Popularity, purpose and promotion of amateur research and investigation groups in the U.S

    Science.gov (United States)

    Hill, Sharon A.

    21st century television and the Internet are awash in content regarding amateur paranormal investigators and research groups. These groups proliferated after reality investigation programs appeared on television. Exactly how many groups are active in the U.S. at any time is not known. The Internet provides an ideal means for people with niche interests to find each other and organize activities. This study collected information from 1000 websites of amateur research and investigation groups (ARIGs) to determine their location, area of inquiry, methodology and, particularly, to determine if they state that they use science as part of their mission, methods or goals. 57.3% of the ARIGs examined specifically noted or suggested use of science as part of the groups' approach to investigation and research. Even when not explicit, ARIGs often used science-like language, symbols and methods to describe their groups' views or activities. Yet, non-scientific and subjective methods were described as employed in conjunction with objective methods. Furthermore, what were considered scientific processes by ARIGs did not match with established methods and the ethos of the scientific research community or scientific processes of investigation. ARIGs failed to display fundamental understanding regarding objectivity, methodological naturalism, peer review, critical thought and theoretical plausibility. The processes of science appear to be mimicked to present a serious and credible reputation to the non-scientific public. These processes are also actively promoted in the media and directly to the local public as "scientific". These results highlight the gap between the scientific community and the lay public regarding the understanding of what it means to do science and what criteria are necessary to establish reliable knowledge about the world.

  19. Stroke Investigative Research and Education Network: Community Engagement and Outreach within Phenomics Core

    Science.gov (United States)

    Jenkins, Carolyn; Arulogun, Oyedunni Sola; Singh, Arti; Mande, Aliyu T.; Ajayi, Eric; Benedict, Calys Tagoe; Ovbiagele, Bruce; Lackland, Daniel T.; Sarfo, Fred Stephen; Akinyemi, Rufus; Akpalu, Albert; Obiako, Reginald; Melikam, Enzinne Sylvia; Laryea, Ruth; Shidali, Vincent; Sagoe, Kwamena; Ibinaiye, Philip; Fakunle, Adekunie Gregory; Owolabi, Lukman F.; Owolabi, Mayowa O.

    2016-01-01

    Stroke is the leading cause of neurological hospital admissions in sub-Saharan Africa (SSA) and the second leading cause of death globally. The Stroke Investigative Research and Education Network [SIREN] seeks to comprehensively characterize the genomic, sociocultural, economic, and behavioral risk factors for stroke and to build effective teams…

  20. Preliminary investigation of airgap electrospun silk-fibroin-based structures for ligament analogue engineering.

    Science.gov (United States)

    Sell, S A; McClure, M J; Ayres, C E; Simpson, D G; Bowlin, G L

    2011-01-01

    The process of electrospinning has proven to be highly beneficial for use in a number of tissue-engineering applications due to its ease of use, flexibility and tailorable properties. There have been many publications on the creation of aligned fibrous structures created through various forms of electrospinning, most involving the use of a metal target rotating at high speeds. This work focuses on the use of a variation known as airgap electrospinning, which does not use a metal collecting target but rather a pair of grounded electrodes equidistant from the charged polymer solution to create highly aligned 3D structures. This study involved a preliminary investigation and comparison of traditionally and airgap electrospun silk-fibroin-based ligament constructs. Structures were characterized with SEM and alignment FFT, and underwent porosity, permeability, and mechanical anisotropy evaluation. Preliminary cell culture with human dermal fibroblasts was performed to determine the degree of cellular orientation and penetration. Results showed airgap electrospun structures to be anisotropic with significantly increased porosity and cellular penetration compared to their traditionally electrospun counterparts.

  1. Shake Table Test for the Collapse Investigation of a Typical Multi-Story Reinforced Concrete Frame Structure in the Meizoseismal Area

    Directory of Open Access Journals (Sweden)

    Weixiao Xu

    2017-06-01

    Full Text Available According to statistics from past earthquakes, it is observed that multi-story reinforced concrete (RC frames represent a large proportion of the structural failures or collapses in seismic events. Hence, research on seismic collapse mechanisms and risks of RC frame structures subjected to extreme earthquakes is of foremost importance. Both experimental and numerical studies have been substantially carried out in this field. In order to represent an actual process of structural damage in an actual seismic event and provide a calibration test for numerical studies, a shake table collapse test of a typical multi-story RC frame structural model, which is scaled from a nearly collapsed building in the 2010 Ms 7.1 Yushu earthquake in China, was performed. Both the test and earthquake field investigation indicate that severe damage mainly occurred at the column ends. As dual structural systems, i.e., systems combining frames and additional members that mainly carry seismic loading, could be a better way to solve the unexpected damage mechanism of RC frames, a practical stiffness iteration design method based on the nonlinear static analysis to obtain the optimal stiffness demanding of the lateral load-resisting members in each story is proposed. This approach aims to control the structural deformation pattern along the height. The outcome of this study provides some intrinsic understanding of the inherent collapse mechanisms of similar RC frames during strong earthquakes. It also offers a practical design method to improve the seismic collapse resistance of RC frames.

  2. Should researchers use single indicators, best indicators, or multiple indicators in structural equation models?

    Directory of Open Access Journals (Sweden)

    Hayduk Leslie A

    2012-10-01

    Full Text Available Abstract Background Structural equation modeling developed as a statistical melding of path analysis and factor analysis that obscured a fundamental tension between a factor preference for multiple indicators and path modeling’s openness to fewer indicators. Discussion Multiple indicators hamper theory by unnecessarily restricting the number of modeled latents. Using the few best indicators – possibly even the single best indicator of each latent – encourages development of theoretically sophisticated models. Additional latent variables permit stronger statistical control of potential confounders, and encourage detailed investigation of mediating causal mechanisms. Summary We recommend the use of the few best indicators. One or two indicators are often sufficient, but three indicators may occasionally be helpful. More than three indicators are rarely warranted because additional redundant indicators provide less research benefit than single indicators of additional latent variables. Scales created from multiple indicators can introduce additional problems, and are prone to being less desirable than either single or multiple indicators.

  3. Science Education Research vs. Physics Education Research: A Structural Comparison

    Science.gov (United States)

    Akarsu, Bayram

    2010-01-01

    The main goal of this article is to introduce physics education research (PER) to researchers in other fields. Topics include discussion of differences between science education research (SER) and physics education research (PER), physics educators, research design and methodology in physics education research and current research traditions and…

  4. Structural and optical investigation of Te-based chalcogenide thin films

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Rita, E-mail: reetasharma2012@gmail.com; Sharma, Shaveta; Thangaraj, R.; Mian, M. [Semiconductors Laboratory, Department of Physics, GND University, Amritsar (India); Chander, Ravi [Applied Science Deptt. Govt. Polytechnic College Amritsar (India); Kumar, Praveen [Department of Physics, DAV University, Sarmastipur, Jalandhar-144012 (India)

    2015-05-15

    We report the structural and optical properties of thermally evaporated Bi{sub 2}Te{sub 3}, In{sub 2}Te{sub 3} and InBiTe{sub 3} films by using X-ray diffraction, optical and Raman Spectroscopy techniques. The as-prepared thin films were found to be Semi-crystalline by X-ray diffraction. Particle Size and Strain has been calculated from XRD data. The optical constants, film thickness, refractive index and optical band gap (E{sub g}) has been reported for In{sub 2}Te{sub 3}, InBiTe{sub 3} films. Raman Spectroscopy was performed to investigate the effect of Bi, In, on lattice vibration and chemical bonding in Te based chalcogenide glassy alloys.

  5. Progress of application, research and development, and design guidelines for shape memory alloy devices for cultural heritage structures in Italy

    Science.gov (United States)

    Castellano, Maria G.; Indirli, Maurizio; Martelli, Alessandro

    2001-07-01

    A wide ranging R&D Project (ISTECH) on validation and application of the Innovative Antiseismic Techniques (IATs) for the restoration of Cultural Heritage Structures (CUHESs), especially masonry buildings, based on the Shape Memory Alloys (SMAs), has been funded by the European Commission (EC), in the framework of the Environment and Climate RTD Programme. Because Traditional Restoration Techniques (TRTs) have sometimes proved inadequate in avoiding collapses and often too invasive, the use of superelastic SMA Devices (SMADs) has been developed. Theoretical and numerical studies, as well as intensive testing of material specimens, devices, structural models and in situ campaigns, show that SMADs can substantially increase the stability of masonry CUHESs exposed to an earthquake. Different SMAD types have been investigated to fulfil different structural needs and they can be custom designed taking into account each monument's characteristics. The successful results of the research and its exploitation led to important applications in Italy: the S. Giorgio Church Bell-Tower, located at Trignano, S. Martino in Rio, Reggio Emilia, damaged by the 15th October 1996 earthquake, the transept tympana of the S. Francesco Basilica in Assisi and the S. Feliciano Cathedral façade in Foligno, both heavily damaged by the September 1997 earthquake. In addition, further studies and applications of SMAD technology are foreseen in Italy in the next future, in the framework of Italian and European research projects and proposals.

  6. Complexity of Curved Glass Structures

    Science.gov (United States)

    Kosić, T.; Svetel, I.; Cekić, Z.

    2017-11-01

    Despite the increasing number of research on the architectural structures of curvilinear forms and technological and practical improvement of the glass production observed over recent years, there is still a lack of comprehensive codes and standards, recommendations and experience data linked to real-life curved glass structures applications regarding design, manufacture, use, performance and economy. However, more and more complex buildings and structures with the large areas of glass envelope geometrically complex shape are built every year. The aim of the presented research is to collect data on the existing design philosophy on curved glass structure cases. The investigation includes a survey about how architects and engineers deal with different design aspects of curved glass structures with a special focus on the design and construction process, glass types and structural and fixing systems. The current paper gives a brief overview of the survey findings.

  7. Investigating accidents involving aircraft manufactured from polymer composite materials

    Science.gov (United States)

    Dunn, Leigh

    This study looks into the examination of polymer composite wreckage from the perspective of the aircraft accident investigator. It develops an understanding of the process of wreckage examination as well as identifying the potential for visual and macroscopic interpretation of polymer composite aircraft wreckage. The in-field examination of aircraft wreckage, and subsequent interpretations of material failures, can be a significant part of an aircraft accident investigation. As the use of composite materials in aircraft construction increases, the understanding of how macroscopic failure characteristics of composite materials may aid the field investigator is becoming of increasing importance.. The first phase of this research project was to explore how investigation practitioners conduct wreckage examinations. Four accident investigation case studies were examined. The analysis of the case studies provided a framework of the wreckage examination process. Subsequently, a literature survey was conducted to establish the current level of knowledge on the visual and macroscopic interpretation of polymer composite failures. Relevant literature was identified and a compendium of visual and macroscopic characteristics was created. Two full-scale polymer composite wing structures were loaded statically, in an upward bending direction, until each wing structure fractured and separated. The wing structures were subsequently examined for the existence of failure characteristics. The examination revealed that whilst characteristics were present, the fragmentation of the structure destroyed valuable evidence. A hypothetical accident scenario utilising the fractured wing structures was developed, which UK government accident investigators subsequently investigated. This provided refinement to the investigative framework and suggested further guidance on the interpretation of polymer composite failures by accident investigators..

  8. A global analysis approach for investigating structural resilience in urban drainage systems.

    Science.gov (United States)

    Mugume, Seith N; Gomez, Diego E; Fu, Guangtao; Farmani, Raziyeh; Butler, David

    2015-09-15

    Building resilience in urban drainage systems requires consideration of a wide range of threats that contribute to urban flooding. Existing hydraulic reliability based approaches have focused on quantifying functional failure caused by extreme rainfall or increase in dry weather flows that lead to hydraulic overloading of the system. Such approaches however, do not fully explore the full system failure scenario space due to exclusion of crucial threats such as equipment malfunction, pipe collapse and blockage that can also lead to urban flooding. In this research, a new analytical approach based on global resilience analysis is investigated and applied to systematically evaluate the performance of an urban drainage system when subjected to a wide range of structural failure scenarios resulting from random cumulative link failure. Link failure envelopes, which represent the resulting loss of system functionality (impacts) are determined by computing the upper and lower limits of the simulation results for total flood volume (failure magnitude) and average flood duration (failure duration) at each link failure level. A new resilience index that combines the failure magnitude and duration into a single metric is applied to quantify system residual functionality at each considered link failure level. With this approach, resilience has been tested and characterised for an existing urban drainage system in Kampala city, Uganda. In addition, the effectiveness of potential adaptation strategies in enhancing its resilience to cumulative link failure has been tested. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

  9. The factor structure of posttraumatic stress disorder: a literature update, critique of methodology, and agenda for future research.

    Science.gov (United States)

    Elhai, Jon D; Palmieri, Patrick A

    2011-08-01

    We present an update of recent literature (since 2007) exploring the factor structure of posttraumatic stress disorder (PTSD) symptom measures. Research supporting a four-factor emotional numbing model and a four-factor dysphoria model is presented, with these models fitting better than all other models examined. Variables accounting for factor structure differences are reviewed, including PTSD query instructions, type of PTSD measure, extent of trauma exposure, ethnicity, and timing of administration. Methodological and statistical limitations with recent studies are presented. Finally, a research agenda and recommendations are offered to push this research area forward, including suggestions to validate PTSD’s factors against external measures of psychopathology, test moderators of factor structure, and examine heterogeneity of symptom presentations based on factor structure examination.

  10. Structural investigation of the Grenville Province by radar and other imaging and nonimaging sensors

    Science.gov (United States)

    Lowman, P. D., Jr.; Blodget, H. W.; Webster, W. J., Jr.; Paia, S.; Singhroy, V. H.; Slaney, V. R.

    1984-01-01

    The structural investigation of the Canadian Shield by orbital radar and LANDSAT, is outlined. The area includes parts of the central metasedimentary belt and the Ontario gneiss belt, and major structures as well-expressed topographically. The primary objective is to apply SIR-B data to the mapping of this key part of the Grenville orogen, specifically ductile fold structures and associated features, and igneous, metamorphic, and sedimentary rock (including glacial and recent sediments). Secondary objectives are to support the Canadian RADARSAT project by evaluating the baseline parameters of a Canadian imaging radar satellite planned for late in the decade. The baseline parameters include optimum incidence and azimuth angles. The experiment is to develop techniques for the use of multiple data sets.

  11. Investigating the Local Three-dimensional Velocity Structure of the 2008 Taoyuan Earthquake Sequence of Kaohsiung, Taiwan

    Science.gov (United States)

    Shih, M. H.; Huang, B. S.

    2016-12-01

    March 4, 2008, a moderate earthquake (ML 5.2) occurred in Taoyuan district of Kaohsiung County in the southern Taiwan. It was followed by numerous aftershocks in the following 48 hours, including three events with magnitude larger than 4. The Taoyuan earthquake sequence occurred during the TAIGER (Taiwan Integrated Geodynamic Research) project which is to image lithospheric structure of Taiwan orogeny. The high-resolution waveform data of this sequence were well-recorded by a large number of recording stations belong to several different permanent and TAIGER networks all around Taiwan. We had collected the waveform data and archived to a mega database. Then, we had identified 2,340 events from database in the preliminary locating process by using 1-D velocity model. In this study, we applied the double-difference tomography to investigate not only the fault geometry of the main shock but also the detailed 3-D velocity structure in this area. A total of 3,034 events were selected from preliminary locating result and CWBSN catalog in the vicinity. The resulting aftershocks are extended along the NE-SW direction and located on a 45° SE-dipping plane which agrees to one of the nodal planes of Global CMT solution (strike = 45°, dip = 40° and rake = 119°). We can identify a clear low-velocity area which is enclosed by events next to the main shock in the final 3D velocity model. We also recognized a 45°-dipping zone which is extended to the ground surface with low-velocity; meanwhile, velocity structure variation in study area correspond with major geologic units in Taiwan.

  12. Investigation of phase transformation for ferrite–austenite structure in stainless steel thin films

    Energy Technology Data Exchange (ETDEWEB)

    Merakeb, Noureddine [Laboratory of Physical Metallurgy and Property of Materials (LM2PM), Metallurgy and Materials Engineering Department, Badji Mokhtar University, P.O. Box 12, Annaba 23000 (Algeria); Messai, Amel [Laboratoire d' Ingénierie et Sciences des Matériaux Avancés (ISMA), Institut des Sciences et Technologie, Abbès Laghrour University, Khenchela 40000 (Algeria); Ayesh, Ahmad I., E-mail: ayesh@qu.edu.qa [Department of Mathematics, Statistics and Physics, Qatar University, Doha (Qatar)

    2016-05-01

    In this work we report on phase transformation of 304 stainless steel thin films due to heat treatment. Ex-situ annealing was applied for evaporated 304 stainless steel thin films inside an ultra-high vacuum chamber with a pressure of 3 × 10{sup −7} Pa at temperatures of 500 °C and 600 °C. The structure of thin films was studied by X-ray diffraction (XRD) and conversion electron Mössbauer spectroscopy (CEMS) techniques. The results revealed a transformation from α-phase that exhibits a body-centered cubic structure (BCC) to γ-phase that exhibits a face-centered cubic (FCC) due to annealing. In addition, the percentage of γ-phase structure increased with the increase of annealing temperature. Annealing thin films increased the crystal size of both phases (α and γ), however, the increase was nonlinear. The results also showed that phase transformation was produced by recrystallization of α and γ crystals with a temporal evolution at each annealing temperature. The texture degree of thin films was investigated by XRD rocking curve method, while residual stress was evaluated using curvature method. - Highlights: • Stainless steel thin films were fabricated by thermal evaporation on quartz. • Alpha to gamma phase transformation of thin films was investigated. • Annealing of thin films reduces disruption in crystal lattice. • The stress of as-grown thin films was independent on the thin film thickness. • The stress of the thin films was reduced due to annealing.

  13. Investigation of Zinc Oxide-Loaded Poly(Vinyl Alcohol) Nanocomposite Films in Tailoring Their Structural, Optical and Mechanical Properties

    Science.gov (United States)

    Aslam, Muhammad; Kalyar, Mazhar Ali; Raza, Zulfiqar Ali

    2018-04-01

    Wurtzite ZnO nanoparticles, as a nanofiller, were incorporated in a poly(vinyl alcohol) (PVA) matrix to prepare multipurpose nanocomposite films using a solution casting approach. Some advanced analytical techniques were used to investigate the properties of prepared nanocomposite films. The mediation of ZnO nanofillers resulted in modification of structural, optical and mechanical properties of nanocomposite films. A comprehensive band structure investigation might be useful for designing technological applications like in optoelectronic devices. The experimental results were found to be closely dependent on the nanofiller contents. Some theoretical models like Tauc's and Wemple-DiDomenico, were employed to investigate the band structure parameters. The imaginary part of the dielectric constant was used to investigate the band gap. Then, the Helpin-Tsai model was employed to predict Young's moduli of the prepared nanocomposite films. On 3 wt.% ZnO nanofiller loading, the optical band gap of the PVA-based nanocomposite film was decreased from 5.26 eV to 3 eV, the tensile strength increased from 25.3 MPa to 48 MPa and Young's modulus increased from 144 MPa to 544 MPa.

  14. Beyond traditional advertisements: leveraging Facebook's social structures for research recruitment.

    Science.gov (United States)

    Valdez, Rupa S; Guterbock, Thomas M; Thompson, Morgan J; Reilly, Jeremiah D; Menefee, Hannah K; Bennici, Maria S; Williams, Ishan C; Rexrode, Deborah L

    2014-10-27

    Obtaining access to a demographically and geographically diverse sample for health-related research can be costly and time consuming. Previous studies have reported mixed results regarding the potential of using social media-based advertisements to overcome these challenges. Our aim was to develop and assess the feasibility, benefits, and challenges of recruiting for research studies related to consumer health information technology (IT) by leveraging the social structures embedded in the social networking platform, Facebook. Two recruitment strategies that involved direct communication with existing Facebook groups and pages were developed and implemented in two distinct populations. The first recruitment strategy involved posting a survey link directly to consenting groups and pages and was used to recruit Filipino-Americans to a study assessing the perceptions, use of, and preferences for consumer health IT. This study took place between August and December 2013. The second recruitment strategy targeted individuals with type 2 diabetes and involved creating a study-related Facebook group and asking administrators of other groups and pages to publicize our group to their members. Group members were then directly invited to participate in an online pre-study survey. This portion of a larger study to understand existing health management practices as a foundation for consumer health IT design took place between May and June 2014. In executing both recruitment strategies, efforts were made to establish trust and transparency. Recruitment rate, cost, content of interaction, and characteristics of the sample obtained were used to assess the recruitment methods. The two recruitment methods yielded 87 and 79 complete responses, respectively. The first recruitment method yielded a rate of study completion proportionate to that of the rate of posts made, whereas recruitment successes of the second recruitment method seemed to follow directly from the actions of a subset

  15. Communications tools in research projects to support Semi and Non Structured Information

    Directory of Open Access Journals (Sweden)

    Astrid Jaime

    2005-06-01

    Full Text Available Innovation and thus the production of knowledge becomes a factor of competitiveness. In this context quality management could be complemented by knowledge management to aim the improvement of knowledge production by research activities process. To this end, after describing knowledge and informa-tion typologies in engineering activities, a knowledge man-agement system is proposed. The goal is to support: (1 Semi-Structured Information (e.g. reports, etc. thanks to the BASIC-Lab tool functions, which are based on attributing points of view and annotations to documents and document zones, and (2 Non-Structured Information (such as mail, dialogues, etc., thanks to MICA-Graph approach which intends to support ex-change of technical messages that concerns common resolution of research problems within project teams and to capitalise relevant knowledge. For the both approaches, prototype tools have been developed and evaluated, primarily to feed back with manufacturing knowledge in the EADS industrial envi-ronment.

  16. Bridge-in-a-Backpack(TM) task 3.1: investigating soil - structure interaction - experimental design.

    Science.gov (United States)

    2015-07-01

    This report includes fulfillment of Task 3.1 of a multi-task contract to further enhance concrete filled FRP tubes, or : the Bridge in a Backpack. Task 3 is an investigation of soil-structure interaction for the FRP tubes. Task 3.1 is the : design of...

  17. John Huizenga at the Nuclear Structure Research Lab. (NSRL)

    International Nuclear Information System (INIS)

    Gove, H.E.

    1986-01-01

    The first experiments at the University of Rochester's Nuclear Structure Research Laboratory were carried out in early November of 1966 and the accelerator itself was officially accepted in April of 1967. The laboratory's inception was a result of an idea of Robert Marshack and Bruce French of the Department of Physics and Astronomy at Rochester. A proposal was submitted to three federal agencies in February 1962. The proposal was accepted by the latter organization, the National Science Foundation and NSRL has flourished in nuclear science since that time. This paper presents an overview of John Huizenga's activities at the NSRL

  18. Research by ESS Division for the Nevada Nuclear Waste Storage Investigations: Progress report, January-June 1985

    International Nuclear Information System (INIS)

    Vaniman, D.

    1987-10-01

    Petrographic research for the Nevada Nuclear Waste Storage Investigations focused on xenolithic variability in the Topopah Spring Member and on variations of clinoptilolite composition at Yucca Mountain. Zeolite and smectite occurrences were considered in terms of their relation to a disturbed zone beneath the potential repository, and mineral stability experiments have produced a new clinoptilolite structure as a result of prolonged heating at low temperature. Limitations were defined on the abundance of erionite and of sulfur. X-ray diffraction studies lead to improved analytical methods. Progress was made in the comparative study of mineralogy in sand ramps and in faults. Geological modeling considered the differences of the diffusion of nonsorbing tracers in vertically and in horizontally fractured rock. Modeling also treated the diffusion of a nonsorbing tracer in devitrified and in zeolitized rock. The results of these experiments in all cases show relatively symmetrical two-dimensional diffusion patterns. Preliminary calculations compare the dispersion/diffusion of nonsorbing Tc with the dispersion/diffusion/sorption of U. 27 refs., 20 figs., 5 tabs

  19. Investigation of structural resorption behavior of biphasic bioceramics with help of gravimetry, μCT, SEM, and XRD.

    Science.gov (United States)

    de Wild, Michael; Amacher, Fabienne; Bradbury, Christopher R; Molenberg, Aart

    2016-04-01

    Resorbable bone substitute materials are widely used for bone augmentation after tumor resection, parallel to implant placement, or in critical size bone defects. In this study, the structural dissolution of a biphasic calcium phosphate bone substitute material with a hydroxyapatite (HA)/tricalcium phosphate (β-TCP) ratio of 60/40 was investigated by repeatedly placing porous blocks in EDTA solution at 37 °C. At several time points, the blocks were investigated by SEM, µCT, and gravimetry. It was found that always complete 2-3 µm sized grains were removed from the structure and that the β-TCP is dissolved more rapidly. This selective dissolution of the β-TCP grains was confirmed by XRD measurements. The blocks were eroded from the outside toward the center. The structure remained mechanically stable because the central part showed a delayed degradation and because the slower dissolving HA grains preserved the integrity of the structure. © 2015 Wiley Periodicals, Inc.

  20. Variations in the Circumplex Structure of Mood.

    Science.gov (United States)

    Feldman, Lisa A.

    1995-01-01

    Researchers have emphasized the similarity of the semantic and self-report mood circumplexes. Study investigated systematic differences in theses structures. Demonstrated that when making judgments of their mood, people weigh the arousal dimension less than the valence dimension. Dimensions are weighed equally in semantic structure. (JBJ)